THE CORROSION CONTROL-WATER QUALITY SPIDER WEB

EPA Science Inventory

This presentation provides an overview of new research results and emerging research needs with respect to both corrosion control issues, (lead, copper, iron) and to issues of inorganic contaminants that can form or accumulate in distribution system, water, pipe scales and distri...

Studying Diversity in Teacher Education

ERIC Educational Resources Information Center

Ball, Arnetha, Ed.; Tyson, Cynthia A., Ed.

2011-01-01

"Studying Diversity in Teacher Education" is a collaborative effort by experts seeking to elucidate one of the most important issues facing education today. First, the volume examines historically persistent, yet unresolved issues in teacher education and presents research that is currently being done to address these issues. Second, it…

UNSOLVED PROBLEMS WITH CORROSION AND DISTRIBUTION SYSTEM INORGANICS

EPA Science Inventory

This presentation provides an overview of new research results and remaining research needs with respect to both corrosion control issues (lead, copper, iron) and to issues of inorganic contaminants that can form or accumulate in distribution system water, pipe scales and distrib...

76 FR 9498 - Airworthiness Directives; The Boeing Company Model 737-300, -400, and -500 Series Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-18

... installed, repetitive inspections for corrosion and indications of corrosion on affected carriage spindles... repetitive inspections. This AD results from reports of corrosion found on carriage spindles that are located on the outboard trailing edge flaps. We are issuing this AD to detect and correct corrosion of the...

Unresolved Technical Issues in Fair Interest Measurement.

ERIC Educational Resources Information Center

Cole, Nancy S.

The problem of sex differences in interest measurement involves many technical issues and procedures. The purpose of this paper is to provide a description of the technical problems involved in construction, scoring, and interpretation of interest measures as related to sex differences and to suggest guidelines within these technical issues which…

Problems and Issues of Diversity in the United States.

ERIC Educational Resources Information Center

Naylor, Larry L., Ed.

A number of social problems created by cultural diversity in the United States seem to defy resolution. The essays in this collection address some of these issues and are designed to initiate serious discussions on some of the most serious questions. The chapters are: (1) "Introduction to American Cultural Diversity: Unresolved Questions, Issues,…

Kohlberg and Gilligan: Duet or Duel?

ERIC Educational Resources Information Center

Jorgensen, Gunnar

2006-01-01

Most moral psychologists have come to accept two types of moral reasoning: Kohlberg's "justice" and Gilligan's "care", but there still seem to be some unresolved issues. By analysing and comparing Kohlberg's statement on some theoretical issues with some of Gilligan's statements in an interview in April 2003, I will look at some key issues in the…

76 FR 11324 - Airworthiness Directives; Allied Ag Cat Productions, Inc. Models G-164, G-164A, G-164B, G-164B...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... rudder assembly for corrosion, taking necessary corrective action if corrosion is found, and applying corrosion protection. This AD retains the requirements of the previous AD and changes the compliance time.... We are issuing this AD to detect and correct corrosion in the rudder main tubular spar, which could...

Psychological Constructivism in Therapy and Counseling: Some Unresolved Issues.

ERIC Educational Resources Information Center

Kruglanski, Arie W.

1988-01-01

Responds to Mahoney and Lyddon's review of constructivism in previous article by discussing several major problems that should be resolved if constructivism is to become widely accepted alternative to prevalent rationalist therapies. Included are issues of authority, pathology, and intervention. (NB)

Marine Atmospheric Corrosion of Carbon Steel: A Review.

PubMed

Alcántara, Jenifer; Fuente, Daniel de la; Chico, Belén; Simancas, Joaquín; Díaz, Iván; Morcillo, Manuel

2017-04-13

The atmospheric corrosion of carbon steel is an extensive topic that has been studied over the years by many researchers. However, until relatively recently, surprisingly little attention has been paid to the action of marine chlorides. Corrosion in coastal regions is a particularly relevant issue due the latter's great importance to human society. About half of the world's population lives in coastal regions and the industrialisation of developing countries tends to concentrate production plants close to the sea. Until the start of the 21st century, research on the basic mechanisms of rust formation in Cl - -rich atmospheres was limited to just a small number of studies. However, in recent years, scientific understanding of marine atmospheric corrosion has advanced greatly, and in the authors' opinion a sufficient body of knowledge has been built up in published scientific papers to warrant an up-to-date review of the current state-of-the-art and to assess what issues still need to be addressed. That is the purpose of the present review. After a preliminary section devoted to basic concepts on atmospheric corrosion, the marine atmosphere, and experimentation on marine atmospheric corrosion, the paper addresses key aspects such as the most significant corrosion products, the characteristics of the rust layers formed, and the mechanisms of steel corrosion in marine atmospheres. Special attention is then paid to important matters such as coastal-industrial atmospheres and long-term behaviour of carbon steel exposed to marine atmospheres. The work ends with a section dedicated to issues pending, noting a series of questions in relation with which greater research efforts would seem to be necessary.

77 FR 55681 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

... prompted by reports of stress corrosion cracking in the chord segments made from 7079 aluminum in the... repairing discrepancies if necessary. We are issuing this AD to detect and correct stress corrosion and/or... America Code 55: Stabilizers. (e) Unsafe Condition This AD was prompted by reports of stress corrosion...

78 FR 7647 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

... gouges, scratches, and corrosion, and replacing the trunnions if necessary; and adding serial numbers and... section. We are issuing this AD to detect and correct cracking, gouges, scratches, and corrosion of the... trunnions and upper and lower pins for gouges, scratches, and corrosion, and replacing if necessary; and...

77 FR 13191 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-06

... corrosion and inadequate silver-plating. This AD requires replacing ADG power feeder cables. We are issuing this AD to prevent galvanic corrosion on ADG power feeder cables, which could result in damage to the... damaged due to galvanic corrosion. It was subsequently determined that the silver- plating is inadequate...

78 FR 49978 - Airworthiness Directives; the Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

... currently requires repetitive inspections for cracking and corrosion of the aft pressure bulkhead, and... we issued AD 2002-10-11, we have received three reports of severe corrosion in the area affected by... actions if necessary. This proposed AD would also limit corrosion and cracking repairs of the aft pressure...

Extrinsic and intrinsic motivation at 30: Unresolved scientific issues.

PubMed

Reiss, Steven

2005-01-01

The undermining effect of extrinsic reward on intrinsic motivation remains unproven. The key unresolved issues are construct invalidity (all four definitions are unproved and two are illogical); measurement unreliability (the free-choice measure requires unreliable, subjective judgments to infer intrinsic motivation); inadequate experimental controls (negative affect and novelty, not cognitive evaluation, may explain "undermining" effects); and biased metareviews (studies with possible floor effects excluded, but those with possible ceiling effects included). Perhaps the greatest error with the undermining theory, however, is that it does not adequately recognize the multifaceted nature of intrinsic motivation (Reiss, 2004a). Advice to limit the use of applied behavior analysis based on "hidden" undermining effects is ideologically inspired and is unsupported by credible scientific evidence.

Marine Atmospheric Corrosion of Carbon Steel: A Review

PubMed Central

Alcántara, Jenifer; de la Fuente, Daniel; Chico, Belén; Simancas, Joaquín; Díaz, Iván; Morcillo, Manuel

2017-01-01

The atmospheric corrosion of carbon steel is an extensive topic that has been studied over the years by many researchers. However, until relatively recently, surprisingly little attention has been paid to the action of marine chlorides. Corrosion in coastal regions is a particularly relevant issue due the latter’s great importance to human society. About half of the world’s population lives in coastal regions and the industrialisation of developing countries tends to concentrate production plants close to the sea. Until the start of the 21st century, research on the basic mechanisms of rust formation in Cl−-rich atmospheres was limited to just a small number of studies. However, in recent years, scientific understanding of marine atmospheric corrosion has advanced greatly, and in the authors’ opinion a sufficient body of knowledge has been built up in published scientific papers to warrant an up-to-date review of the current state-of-the-art and to assess what issues still need to be addressed. That is the purpose of the present review. After a preliminary section devoted to basic concepts on atmospheric corrosion, the marine atmosphere, and experimentation on marine atmospheric corrosion, the paper addresses key aspects such as the most significant corrosion products, the characteristics of the rust layers formed, and the mechanisms of steel corrosion in marine atmospheres. Special attention is then paid to important matters such as coastal-industrial atmospheres and long-term behaviour of carbon steel exposed to marine atmospheres. The work ends with a section dedicated to issues pending, noting a series of questions in relation with which greater research efforts would seem to be necessary. PMID:28772766

PH and Electrochemical Responsive Materials for Corrosion Smart Coating Applications

NASA Technical Reports Server (NTRS)

Li, Wenyan; Calle, Luz M.

2008-01-01

Corrosion is a costly issue for military operations and civil industries. While most corrosion initiates from localized corrosion form, such as pitting, failure directly caused by localized corrosion is the most dangerous kind, because it is difficult to anticipate and prevent, occurs very suddenly and can be catastrophic. One way of preventing these failures is with a coating that can detect and heal localized corrosion. pH and other electrochemical changes are often associated with localized corrosion, so it is expected that materials that are pH or otherwise electrochemical responsive can be used to detect and control corrosion. This paper will review various pH and electrochemical responsive materials and their potential applications in corrosion smart coatings. Current research results in this field will also be reported.

78 FR 4053 - Airworthiness Directives; PILATUS Aircraft Ltd. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-18

... fittings caused by stress corrosion. We are issuing this AD to require actions to address the unsafe... prompted due to the discovery of cracks in the engine mount fittings. The cracks are caused by stress corrosion. It is possible for stress corrosion cracks to occur on engine mount fittings initially made of...

78 FR 65204 - Airworthiness Directives; BAE Systems (Operations) Limited Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... the number 1 engine due to stress corrosion. This AD requires repetitive inspections and, depending on.... Subsequent investigation revealed that the cause of cracking was stress corrosion. Cracking of the pylon pick... bracket of the forward outboard pylon of the number 1 engine due to stress corrosion. We are issuing this...

University Management Education and Research in Canada: Some Unresolved Issues.

ERIC Educational Resources Information Center

von Zur-Muehlen, Max

An historical overview of university management education and research in Canada is presented and issues relevant to the present status of management education and research opportunities are discussed. Management and administrative studies schools in Canada receive, on the average, about four percent of the operating budget of the university…

Forces Affecting Educational Decisions.

ERIC Educational Resources Information Center

Sullivan, Neil V.

This speech begins with a discussion of broad social and political patterns and trends that are currently developing and continues to the specific unresolved social issues which will affect the nature and structure of educational systems. Those issues seen by the author is most likely to produce the greatest amount of activity are integration, the…

The Challenges of Intersectionality: Researching Difference in Physical Education

ERIC Educational Resources Information Center

Flintoff, A.; Fitzgerald, H.; Scraton, S.

2008-01-01

Researching the intersection of class, race, gender, sexuality and disability raises many issues for educational research. Indeed, Maynard (2002, 33) has recently argued that "difference is one of the most significant, yet unresolved, issues for feminist and social thinking at the beginning of the twentieth century". This paper reviews…

14 CFR 431.37 - Mission readiness.

Code of Federal Regulations, 2014 CFR

2014-01-01

... contingency abort plans and procedures, if any, as required under § 431.39; (vi) Unresolved safety issues.... (2) Procedures that ensure mission constraints, rules, contingency abort and emergency abort...

14 CFR 431.37 - Mission readiness.

Code of Federal Regulations, 2012 CFR

2012-01-01

... contingency abort plans and procedures, if any, as required under § 431.39; (vi) Unresolved safety issues.... (2) Procedures that ensure mission constraints, rules, contingency abort and emergency abort...

14 CFR 431.37 - Mission readiness.

Code of Federal Regulations, 2013 CFR

2013-01-01

... contingency abort plans and procedures, if any, as required under § 431.39; (vi) Unresolved safety issues.... (2) Procedures that ensure mission constraints, rules, contingency abort and emergency abort...

14 CFR 431.37 - Mission readiness.

Code of Federal Regulations, 2011 CFR

2011-01-01

... contingency abort plans and procedures, if any, as required under § 431.39; (vi) Unresolved safety issues.... (2) Procedures that ensure mission constraints, rules, contingency abort and emergency abort...

14 CFR 431.37 - Mission readiness.

Code of Federal Regulations, 2010 CFR

2010-01-01

... contingency abort plans and procedures, if any, as required under § 431.39; (vi) Unresolved safety issues.... (2) Procedures that ensure mission constraints, rules, contingency abort and emergency abort...

Electroplate Short Mix

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2017-06-19

Modifying the surface chemistry of materials by aluminization can protect vulnerable materials from corroding in harsh environments. The industry deals with corrosion issues is to regularly inspect components and replace them with corrosion resistant components.

76 FR 54405 - Airworthiness Directives; The Boeing Company Model 747 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-01

... fracture were initiated by fatigue and propagated by a combination of fatigue and stress corrosion. We are... stress corrosion. One operator reported a fractured latch pin of the lower sill of the aft lower lobe... by fatigue and propagated by a combination of fatigue and stress corrosion. We are issuing this AD to...

15 CFR 971.300 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Certification of Applications § 971... the pending unresolved issues, the efforts to resolve them, and an estimate of the time required to do...

Mathematical and Numerical Studies of Nonstandard Difference Equation Models of Differential Equations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mickens, Ronald E.

2008-12-22

This research examined the following items/issues: the NSFD methodology, technical achievements and applications, dissemination efforts and research related professional activities. Also a list of unresolved issues were identified that could form the basis for future research in the area of constructing and analyzing NSFD schemes for both ODE's and PDE's.

Equity in Education: Opportunities and Challenges In A Changing Sri Lanka

ERIC Educational Resources Information Center

Sedere, Upali M.

2010-01-01

Equity is a major concern for all development actors. Although Sri Lanka has successfully addressed equity issues in education sector there are unresolved factors and variables those perpetuate inequity. There are emerging new equity issues those that Sri Lanka needs to address. The changing population dynamics and the huge middle class population…

Unconscious Inhibition and Facilitation at the Objective Detection Threshold: Replicable and Qualitatively Different Unconscious Perceptual Effects

ERIC Educational Resources Information Center

Snodgrass, Michael; Shevrin, Howard

2006-01-01

Although the veridicality of unconscious perception is increasingly accepted, core issues remain unresolved [Jack, A., & Shallice, T. (2001). Introspective physicalism as an approach to the science of consciousness. "Cognition, 79," 161-196], and sharp disagreement persists regarding fundamental methodological and theoretical issues. The most…

The Thermodynamics of Black Holes.

PubMed

Wald, Robert M

2001-01-01

We review the present status of black hole thermodynamics. Our review includes discussion of classical black hole thermodynamics, Hawking radiation from black holes, the generalized second law, and the issue of entropy bounds. A brief survey also is given of approaches to the calculation of black hole entropy. We conclude with a discussion of some unresolved open issues.

13 CFR 130.700 - Suspension, termination and non-renewal.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the AA/SBDCs a written description of the unresolved issues, a summary of the positions of the District Office on the issues, and any supportive documentation. (5) The AA/SBDCs shall transmit a written... extension of time is mutually agreed upon by the recipient organization and the AA/SBDCs. (6) The AA/SBDCs...

13 CFR 130.700 - Suspension, termination and non-renewal.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the AA/SBDCs a written description of the unresolved issues, a summary of the positions of the District Office on the issues, and any supportive documentation. (5) The AA/SBDCs shall transmit a written... extension of time is mutually agreed upon by the recipient organization and the AA/SBDCs. (6) The AA/SBDCs...

13 CFR 130.700 - Suspension, termination and non-renewal.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the AA/SBDCs a written description of the unresolved issues, a summary of the positions of the District Office on the issues, and any supportive documentation. (5) The AA/SBDCs shall transmit a written... extension of time is mutually agreed upon by the recipient organization and the AA/SBDCs. (6) The AA/SBDCs...

Corrosivity Sensor for Exposed Pipelines Based on Wireless Energy Transfer.

PubMed

Lawand, Lydia; Shiryayev, Oleg; Al Handawi, Khalil; Vahdati, Nader; Rostron, Paul

2017-05-30

External corrosion was identified as one of the main causes of pipeline failures worldwide. A solution that addresses the issue of detecting and quantifying corrosivity of environment for application to existing exposed pipelines has been developed. It consists of a sensing array made of an assembly of thin strips of pipeline steel and a circuit that provides a visual sensor reading to the operator. The proposed sensor is passive and does not require a constant power supply. Circuit design was validated through simulations and lab experiments. Accelerated corrosion experiment was conducted to confirm the feasibility of the proposed corrosivity sensor design.

Emotion theory and research: highlights, unanswered questions, and emerging issues.

PubMed

Izard, Carroll E

2009-01-01

Emotion feeling is a phase of neurobiological activity, the key component of emotions and emotion-cognition interactions. Emotion schemas, the most frequently occurring emotion experiences, are dynamic emotion-cognition interactions that may consist of momentary/situational responding or enduring traits of personality that emerge over developmental time. Emotions play a critical role in the evolution of consciousness and the operations of all mental processes. Types of emotion relate differentially to types or levels of consciousness. Unbridled imagination and the ability for sympathetic regulation of empathy may represent both potential gains and losses from the evolution and ontogeny of emotion processes and consciousness. Unresolved issues include psychology's neglect of levels of consciousness that are distinct from access or reflective consciousness and use of the term "unconscious mind" as a dumpster for all mental processes that are considered unreportable. The relation of memes and the mirror neuron system to empathy, sympathy, and cultural influences on the development of socioemotional skills are unresolved issues destined to attract future research.

Emotion Theory and Research: Highlights, Unanswered Questions, and Emerging Issues

PubMed Central

Izard, Carroll E.

2009-01-01

Emotion feeling is a phase of neurobiological activity, the key component of emotions and emotion-cognition interactions. Emotion schemas, the most frequently occurring emotion experiences, are dynamic emotion-cognition interactions that may consist of momentary/ situational responding or enduring traits of personality that emerge over developmental time. Emotions play a critical role in the evolution of consciousness and the operations of all mental processes. Types of emotion relate differentially to types or levels of consciousness. Unbridled imagination and the ability for sympathetic regulation of empathy may represent both potential gains and losses from the evolution and ontogeny of emotion processes and consciousness. Unresolved issues include psychology’s neglect of levels of consciousness that are distinct from access or reflective consciousness and use of the term “unconscious mind” as a dumpster for all mental processes that are considered unreportable. The relation of memes and the mirror neuron system to empathy, sympathy, and cultural influences on the development of socioemotional skills are unresolved issues destined to attract future research. PMID:18729725

75 FR 9756 - Airworthiness Directives; Bombardier, Inc. Model DHC-8-100 and DHC-8-200 Series Airplanes, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-04

... defined in Part 1 of the Bombardier (de Havilland) DHC-6 Twin Otter, Dash 7 & Dash 8 Corrosion Prevention... Corrosion Prevention and Control Manual PSM 1-GEN- 5, Part 1, Revision 3, contains the revision level of... more likely to exhibit indications of corrosion. We are issuing this AD to prevent structural failure...

Issues for Storing Plant-Based Alternative Fuels in Marine Environments

DTIC Science & Technology

2014-05-09

of aerobic metabolites that exacerbated subsequent corrosion processes. 15. SUBJECT TERMS biodiesel , alternative fuel, seawater, corrosion, carbon...2013 Accepted 17 December 2013 Available online 24 December 2013 Keywords: Biodiesel Alternative fuel Seawater Corrosion Carbon steel...these experiments including soy- derived fatty acid methyl ester biodiesel (B100), U.S. military specified petroleum diesel (F-76) and petroleum jet

Corrosion probe. Innovative technology summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Over 253 million liters of high-level waste (HLW) generated from plutonium production is stored in mild steel tanks at the Department of Energy (DOE) Hanford Site. Corrosion monitoring of double-shell storage tanks (DSTs) is currently performed at Hanford using a combination of process knowledge and tank waste sampling and analysis. Available technologies for corrosion monitoring have progressed to a point where it is feasible to monitor and control corrosion by on-line monitoring of the corrosion process and direct addition of corrosion inhibitors. The electrochemical noise (EN) technique deploys EN-based corrosion monitoring probes into storage tanks. This system is specifically designedmore » to measure corrosion rates and detect changes in waste chemistry that trigger the onset of pitting and cracking. These on-line probes can determine whether additional corrosion inhibitor is required and, if so, provide information on an effective end point to the corrosion inhibitor addition procedure. This report describes the technology, its performance, its application, costs, regulatory and policy issues, and lessons learned.« less

Expanding Horizons and Unresolved Conundrums: Language Testing and Assessment

ERIC Educational Resources Information Center

Leung, Constant; Lewkowicz, Jo

2006-01-01

Since the last "TESOL Quarterly" commemorative issue 15 years ago, there have been too many important developments in language testing and assessment for all of them to be discussed in a single article. Therefore, this article focuses on issues that we believe are integrally linked to pedagogic and curriculum concerns of English language teaching.…

Crunch Seen on Ed. Issues after Election

ERIC Educational Resources Information Center

Klein, Alyson

2012-01-01

From the White House to Capitol Hill, the winners in this week's elections won't have much time to savor their victories. Even as federal policymakers sort out the political landscape, the remainder of 2012 and the early months of 2013 are likely to be dominated by divisive, unresolved issues with broad consequences for K-12 and higher…

Corrosion detection and evolution monitoring in reinforced concrete structures by the use of fiber Bragg grating sensor

NASA Astrophysics Data System (ADS)

Ali-Alvarez, S.; Ferdinand, P.; Magne, S.; Nogueira, R. P.

2013-04-01

Corrosion of reinforced bar (rebar) in concrete structures represents a major issue in civil engineering works, being its detection and evolution a challenge for the applied research. In this work, we present a new methodology to corrosion detection in reinforced concrete structures, by combining Fiber Bragg Grating (FBG) sensors with the electrochemical and physical properties of rebar in a simplified assembly. Tests in electrolytic solutions and concrete were performed for pitting and general corrosion. The proposed Structural Health Monitoring (SHM) methodology constitutes a direct corrosion measurement potentially useful to implement or improve Condition-Based Maintenance (CBM) program for civil engineering concrete structures.

Corrosivity Sensor for Exposed Pipelines Based on Wireless Energy Transfer

PubMed Central

Lawand, Lydia; Shiryayev, Oleg; Al Handawi, Khalil; Vahdati, Nader; Rostron, Paul

2017-01-01

External corrosion was identified as one of the main causes of pipeline failures worldwide. A solution that addresses the issue of detecting and quantifying corrosivity of environment for application to existing exposed pipelines has been developed. It consists of a sensing array made of an assembly of thin strips of pipeline steel and a circuit that provides a visual sensor reading to the operator. The proposed sensor is passive and does not require a constant power supply. Circuit design was validated through simulations and lab experiments. Accelerated corrosion experiment was conducted to confirm the feasibility of the proposed corrosivity sensor design. PMID:28556805

Microstructure Instability of Candidate Fuel Cladding Alloys: Corrosion and Stress Corrosion Cracking Implications

NASA Astrophysics Data System (ADS)

Jiao, Yinan; Zheng, Wenyue; Guzonas, David; Kish, Joseph

2016-02-01

This paper addresses some of the overarching aspects of microstructure instability expected from both high temperature and radiation exposure that could affect the corrosion and stress corrosion cracking (SCC) resistance of the candidate austenitic Fe-Cr-Ni alloys being considered for the fuel cladding of the Canadian supercritical water-cooled reactor (SCWR) concept. An overview of the microstructure instability expected by both exposures is presented prior to turning the focus onto the implications of such instability on the corrosion and SCC resistance. Results from testing conducted using pre-treated (thermally-aged) Type 310S stainless steel to shed some light on this important issue are included to help identify the outstanding corrosion resistance assessment needs.

Corrosion of RoHS-Compliant Surface Finishes in Corrosive Mixed Flowing Gas Environments

NASA Astrophysics Data System (ADS)

Hannigan, K.; Reid, M.; Collins, M. N.; Dalton, E.; Xu, C.; Wright, B.; Demirkan, K.; Opila, R. L.; Reents, W. D.; Franey, J. P.; Fleming, D. A.; Punch, J.

2012-03-01

Recently, the corrosion resistance of printed wiring board (PWB) finishes has generated considerable interest due to field failures observed in various parts of the world. This study investigates the corrosion issues associated with the different lead-free PWB surface finishes. Corrosion products on various PWB surface finishes generated in mixed flowing gas (MFG) environments were studied, and analysis techniques such as scanning electron microscopy, energy-dispersive x-ray, x-ray diffraction, focused ion beam, and scanning Auger microscopy were used to quantify the corrosion layer thickness and determine the composition of corrosion products. The corrosion on organic solderability preservative samples shows similar corrosion products to bare copper and is mainly due to direct attack of copper traces by corrosive gases. The corrosion on electroless nickel immersion gold occurs primarily through the porosity in the film and is accelerated by the galvanic potential between gold and copper; similar results were observed on immersion silver. Immersion tin shows excellent corrosion resistance due to its inherent corrosion resistance in the MFG environment as well as the opposite galvanic potential between tin and copper compared with gold or silver and copper.

Computational study: Reduction of iron corrosion in lead coolant of fast nuclear reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arkundato, Artoto; Su'ud, Zaki; Abdullah, Mikrajuddin

2012-06-20

In this paper we report molecular dynamics simulation results of iron (cladding) corrosion in interaction with lead coolant of fast nuclear reactor. The goal of this work is to study effect of oxygen injection to the coolant to reduce iron corrosion. By evaluating diffusion coefficients, radial distribution functions, mean-square displacement curves and observation of crystal structure of iron before and after oxygen injection, we concluded that a significant reduction of corrosion can be achieved by issuing about 2% of oxygen atoms into lead coolant.

Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

NASA Technical Reports Server (NTRS)

Pearman, Benjamin Pieter; Li, Wenyan; Buhrow, Jerry; Zhang, Xuejun; Surma, Jan; Fitzpatrick, Lilly; Montgomery, Eliza; Calle, Luz Marina

2014-01-01

Research efforts are under way to replace current corrosion inhibitors with more environmentally friendly alternatives. However, problems with corrosion inhibition efficiency, coating compatibility and solubility have hindered the use of many of these materials as simple pigment additives.This paper will present technical details on how the Corrosion Technology Lab at NASAs Kennedy Space Center (KSC) has addressed these issues by encapsulating environmentally friendly inhibitors into organic and inorganic microparticles and microcapsules. The synthetic process for polymer particles was characterized and post-synthesis analysis was performed to determine the interactions between the inhibitors and the encapsulation material. The pH-controlled release of inhibitors from various particle formulations in aqueous base was monitored and compared to both electrochemical and salt immersion accelerated corrosion experiment. Furthermore, synergistic corrosion inhibition effects observed during the corrosion testing of several inhibitor combinations will be presented.

Sickle red cell adhesion: many issues and some answers.

PubMed

Kaul, D K

2008-01-01

Among multiple pathologies associated with sickle cell disease, sickle red cell-endothelial interaction has been implicated as a potential initiating mechanism in vaso-occlusive events that characterize this disease. Vast literature exists on various aspects of sickle red cell adhesion, but many issues remain unresolved, especially pertaining to the role of sickle red cell heterogeneity, the relative role of multiple adhesion mechanisms and targets of antiadhesive therapy. This review briefly analyzes these issues.

Immunogenicity and immune tolerance coagulation Factors VIII and IX.

PubMed

Rup, B

2003-01-01

Some of the major issues related to the development and control of antibodies that occur during treatment of haemophilia with replacement factors (Factor VIII and Factor IX) are reviewed. Information on analytical issues, immunogenicity, and immune tolerance may be applicable to the study of other therapeutic proteins. Conversely, new information obtained from evaluation of other therapeutic protein products may address issues that remain unresolved for Factor VIII and FIX replacement therapy.

COPPER CORROSION RESEARCH UPDATE

EPA Science Inventory

Copper release and corrosion related issues continue to be important to many water systems. The objective of this presentation is to discuss the current state of copper research at the USEPA. Specifically, the role of aging on copper release, use of phosphates for copper corrosio...

Evaluation on the Corrosion of the Three Ni-Cr Alloys with Different Composition

PubMed Central

Rao, Srinivasa B.; Chowdhary, Ramesh

2011-01-01

Dental casting alloys are widely used in contact with oral tissue for many years now. With the development of new dental alloys over the past 15 years, many questions remain unanswered about their biologic safety. Concepts and current issues concerning the response to the biologic effects of dental casting alloys are presented. In this paper, samples of three commercially available nickel-chrome (Ni-cr) casting alloys (Dentaurum, Bego, Sankin) were taken to assess their corrosion behavior, using potentiodynamic polarization method (electrochemical method) with fusayama artificial saliva as an electrolyte medium to check for their biocompatibility. The parameters for corrosion rate and corrosion resistance were obtained from computer-controlled corrosion schematic instrument, namely, potentiostat through corrosion software (power CV). The results obtained were analyzed by classic Tafel analysis. Statistical analysis was done by Student's t-test and ANOVA test. It was concluded that Dentarum and Bego showed satisfactory corrosive behavior, with exception of Sankin which depicted higher corrosion rate and least resistance to corrosion. Thus, the selection of an alloy should be made on the basis of corrosion resistance and biologic data from dental manufactures. PMID:21461232

Advance of Nitrogen Removal in Constructed Wetland

NASA Astrophysics Data System (ADS)

Xie, Anbin; Chen, Hao; You, Shaohong

2018-01-01

Based on current literature, the article reviewed the mechanism and route of nitrogen removal, discussed the microbial species associated with nitrogen metabolism in constructed wetlands. Key unresolved issues were concluded for classical and novel nitrogen removal routes.

Preterm birth, an unresolved issue.

PubMed

Belizán, Jose M; Hofmeyr, Justus; Buekens, Pierre; Salaria, Natasha

2013-11-15

Premature birth is the world's leading cause of neonatal mortality with worldwide estimates indicating 11.1% of all live births were preterm in 2010. Preterm birth rates are increasing in most countries with continual differences in survival rates amongst rich and poor countries. Preterm birth is currently an important unresolved global issue with research efforts focusing on uterine quiescence and activation, the 'omics' approaches and implementation science in order to reduce the incidence and increase survival rates of preterm babies. The journal Reproductive Health has published a supplement entitled Born Too Soon which addresses factors in the preconception and pregnancy period which may increase the risk of preterm birth and also outlines potential interventions which may reduce preterm birth rates and improve survival of preterm babies by as much as 84% annually. This is critical in order to achieve the Millennium Development Goal (MDG 4) for child survival by 2015 and beyond.

Confronting uncomfortable truths: receptivity and resistance to Aboriginal content in midwifery education.

PubMed

Thackrah, Rosalie D; Thompson, Sandra C

2013-12-01

The emotional responses of students undertaking a new, compulsory unit on Indigenous cultures and health were investigated as part of a broader study looking at culturally secure practice in midwifery education and service provision for Aboriginal women. Classroom observations were conducted on a first year midwifery cohort from July to October 2012 and students completed 'before and after' questionnaires. A spectrum of emotional responses was identified and found to be consistent with studies of medical student exposure to Aboriginal content. While stereotypes were challenged and perceptions altered as a result of the content, issues surrounding racism remained unresolved, with some students expressing dismay at the attitudes of their peers. This study confirmed the need for content on Aboriginal health and cultures to extend beyond one unit in a course. Learning and knowledge must be carefully integrated and developed to maximise understanding and ensure that unresolved issues are addressed.

Corrosion Behavior of Steels in Supercritical CO 2 for Power Cycle Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Repukaiti, Richard; Teeter, Lucas; Ziomek-Moroz, Margaret

In order to understand issues with corrosion of heat exchanger materials in direct supercritical carbon dioxide (sCO 2) power cycles, a series of autoclave exposure experiments and electrochemical experiments have been conducted. Corrosion behaviors of 347H stainless steel and P91 martensitic-ferrtic steel in sCO 2 environment have been compared. In autoclave exposure tests performed at 50°C- 245°C and 80 bar. Mass change measurements, surface characterization, and corrosion product analysis have been conducted to understand the corrosion behavior of steels in sCO 2 containing H 2O and O 2. Electrochemical tests performed at room temperature and 50°C, a simulation environment ofmore » water condensation phase with dissolved CO 2 was prepared to evaluate the corrosion resistance of materials. From both types of experiments, generally 347H showed higher corrosion resistance than P91.« less

A Meta-Analysis Of Corrosion Studies for Maritime Patrol and Reconnaissance Aircraft (MPRA)

DTIC Science & Technology

2016-09-01

performed onsite. Aircraft rating was based upon the presence and/or extent of paint adhesion, paint cracking , clean ability, fluid damage, oxidation...because of corrosion control maintenance. No significant issues were observed related to paint cracking , fluid damage, corrosion, and clean ability of...HEXAMETHYLENEDIISOCYANATE 822-06-0 83194 X-310A; POLYURETHANE CATALYST XYLENE 1330-20-7 82649 X-530; HS EPOXY ENAMEL CURING SOLUTION BUTANOL 71-36-3

Oxytocin and the social brain: neural mechanisms and perspectives in human research.

PubMed

Kanat, Manuela; Heinrichs, Markus; Domes, Gregor

2014-09-11

The present paper summarizes functional imaging studies investigating the effects of intranasal oxytocin (OT) on brain responses to social stimuli. We aim to integrate previous research, point to unresolved issues and highlight perspectives for future studies. The studies so far have focused on identifying neural circuits underlying social information processing which are particularly sensitive to modulations by exogenous OT. Most consistently, stimulus-related responses of the amygdala and associated areas within the prefrontal and temporal cortices have been found to be modulated by OT administration. However, there are a number of unresolved issues related to the possible role of sex differences and hormonal status, genetic variability, and individual differences in socio-cognitive functioning. Future studies focusing on these open questions are expected to contribute to a more nuanced understanding of the role of the central OT system in humans and may provide the basis for novel treatment approaches for mental disorders characterized by social deficits. This article is part of a Special Issue entitled Oxytocin and Social Behav. © 2013 Published by Elsevier B.V.

Safeguarding patient privacy in electronic healthcare in the USA: the legal view.

PubMed

Walsh, Diana; Passerini, Katia; Varshney, Upkar; Fjermestad, Jerry

2008-01-01

The conflict between the sweeping power of technology to access and assemble personal information and the ongoing concern about our privacy and security is ever increasing. While we gradually need higher electronic access to medical information, issues relating to patient privacy and reducing vulnerability to security breaches surmount. In this paper, we take a legal perspective and examine the existing patchwork of laws and obligations governing health information in the USA. The study finds that as Electronic Medical Records (EMRs) increase in scope and dissemination, privacy protections gradually decrease due to the shortcomings in the legal system. The contributions of this paper are (1) an overview of the legal EMR issues in the USA, and (2) the identification of the unresolved legal issues and how these will escalate when health information is transmitted over wireless networks. More specifically, the paper discusses federal and state government regulations such as the Electronic Communications Privacy Act, the Health Insurance Portability and Accountability Act (HIPAA) and judicial intervention. Based on the legal overview, the unresolved challenges are identified and suggestions for future research are included.

Bacterial exopolysaccharides for corrosion resistance on low carbon steel

USDA-ARS?s Scientific Manuscript database

Corrosion is a global issue that affects safety and economics. There is an increasing demand for bio-based polymers for industrial applications and production of polymers by micro-organisms is especially attractive. This work reports on the electrochemical and physical properties of exopolysaccharid...

Hydrogen effects in corrosion: discussion

NASA Astrophysics Data System (ADS)

Stopher, Miles A.; Simpson, E. Luke

2017-06-01

This session contained talks on the characterization of hydrogen-enhanced corrosion of steels and nickel-based alloys, emphasizing the different observations across length scales, from atomic-scale spectrographic to macro-scale fractographic examinations. This article is part of the themed issue 'The challenges of hydrogen and metals'.

Evaluation of the effectiveness of salt neutralizers for washing snow and ice equipment.

DOT National Transportation Integrated Search

2014-01-01

In winter maintenance, the chloride-based deicers used to keep roadways clear of : snow and ice are highly corrosive to vehicles and equipment. Corrosion of snow and ice equipment : is a major issue causing increased maintenance and repair costs, red...

Continuum and line spectra of degenerate dwarf X-ray sources

NASA Technical Reports Server (NTRS)

Lamb, D. Q.

1981-01-01

Recent observations of X-ray sources are summarized. Unresolved issues concerning these sources are discussed and an outline of the kinds of X-ray observations that would best advance the understanding of these sources is presented.

Medicine's Library Lifeline.

ERIC Educational Resources Information Center

Shipman, Jean; Homan, Michael

2003-01-01

Discusses how librarians in the new role of "informationist" can help doctors and researches of medical information. Describes existing models of the informationist; potential benefits of working across professional boundaries outside the library; professional requirements; and unresolved issues for the new role, including potential…

Artificial Intelligence for Command and Control

DTIC Science & Technology

1988-05-15

complexity of information and are a very active current research area. Some of the important unresolved frame -related issues are control issues , such as...indepth analysis of the combat engineer’s decisio -mnaking activities. -Specificaly 3 combat engineers-stationed at Fort Bragg, North Carolina (307th...experience. The CETOOLS concept is potentially applicable in any decision- making environment, commercial or government, where plans for actions are

Temperature factors effect on occurrence of stress corrosion cracking of main gas pipeline

NASA Astrophysics Data System (ADS)

Nazarova, M. N.; Akhmetov, R. R.; Krainov, S. A.

2017-10-01

The purpose of the article is to analyze and compare the data in order to contribute to the formation of an objective opinion on the issue of the growth of stress corrosion defects of the main gas pipeline. According to available data, a histogram of the dependence of defects due to stress corrosion on the distance from the compressor station was constructed, and graphs of the dependence of the accident density due to stress corrosion in the winter and summer were also plotted. Data on activation energy were collected and analyzed in which occurrence of stress corrosion is most likely constructed, a plot of activation energy versus temperature is plotted, and the process of occurrence of stress corrosion by the example of two different grades of steels under the action of different temperatures was analyzed.

10 CFR 709.15 - Processing counterintelligence evaluation results.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Processing counterintelligence evaluation results. 709.15... and Protection of National Security § 709.15 Processing counterintelligence evaluation results. (a) If... are significant unresolved issues, not exclusively related to polygraph examination results...

10 CFR 709.15 - Processing counterintelligence evaluation results.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Processing counterintelligence evaluation results. 709.15... and Protection of National Security § 709.15 Processing counterintelligence evaluation results. (a) If... are significant unresolved issues, not exclusively related to polygraph examination results...

10 CFR 709.15 - Processing counterintelligence evaluation results.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Processing counterintelligence evaluation results. 709.15... and Protection of National Security § 709.15 Processing counterintelligence evaluation results. (a) If... are significant unresolved issues, not exclusively related to polygraph examination results...

Scientific Results of the Nasa-sponsored Study Project on Mars: Evolution of Its Climate and Atmosphere

NASA Technical Reports Server (NTRS)

Clifford, Stephen M.; Greeley, Ronald; Haberle, Robert M.

1988-01-01

The scientific highlights of the Mars: Evolution of its Climate and Atmosphere (MECA) study project are reviewed and some of the important issues in Martian climate research that remain unresolved are discussed.

Electrochemical evaluation for corrosion resistance of bacterial exopolysaccharides on low carbon steel

USDA-ARS?s Scientific Manuscript database

Corrosion is a global issue that affects safety and economics. There is an increasing demand for bio-based polymers for industrial applications and production of polymers by microorganisms is especially attractive. This work reports on the electrochemical and physical properties of 29 strains or fr...

77 FR 29855 - Airworthiness Directives; Saab AB, Saab Aerosystems Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... electronic installation wiring. For the reasons described above, this [EASA] AD requires a one- time... corrosion of the electrical and electronics installation, and if corrosion is found repairing each affected harness braid or replacing each affected component and/or wiring harness. We are issuing this AD to detect...

Influence of the bond-slip relationship on the flexural capacity of R.C. joints damaged by corrosion

NASA Astrophysics Data System (ADS)

Imperatore, Stefania

2016-06-01

In moderate and aggressive environmental condition, old reinforced concrete structures are often subjected to corrosive phenomena. Corrosion causes cracking, loss of diameter in reinforcement and variation of the bond behavior between steel and concrete. Then, in presence of cyclic actions like the seismic ones, old R.C. elements vary their ultimate drift, ductility, plastic rotation capacity and energy dissipation with the corrosion level. The problem is of current interest: the issue has been introduced in some paragraph of the Model Code 2010 and a committee is now drafting a new document on assessment strategies on existing concrete structures also damaged by corrosion. In this work, a first step on the analysis of the impact of the corrosion on the seismic behavior of R.C. elements is assessed: by mean FEM analyses, of a poor detailed column/foundation joint is analyzed in a parametric way in order to evaluate the influence of the bond-slip degradation by corrosion on the element flexural capacity.

MODIFYING THE AVIAN REPRODUCTION TEST GUIDELINES FOR DETERMINING DOSE-RESPONSE RELATIONSHIPS

EPA Science Inventory

As a subgroup of the OECD Expert Group on Assessment of Endocrine Disrupting Effects in Birds, we reviewed unresolved methodological issues important for the development of a two-generation toxicity text, discussed advantages and disadvantages of alternative approaches, and propo...

Manipulating Color and Other Visual Information Influences Picture Naming at Different Levels of Processing: Evidence from Alzheimer Subjects and Normal Controls

ERIC Educational Resources Information Center

Zannino, Gian Daniele; Perri, Roberta; Salamone, Giovanna; Di Lorenzo, Concetta; Caltagirone, Carlo; Carlesimo, Giovanni A.

2010-01-01

There is now a large body of evidence suggesting that color and photographic detail exert an effect on recognition of visually presented familiar objects. However, an unresolved issue is whether these factors act at the visual, the semantic or lexical level of the recognition process. In the present study, we investigated this issue by having…

Effect of fluid flow, pH and tobacco extracts concentration as organic inhibitors to corrosion characteristics of AISI 1045 steel in 3.5% NaCl environment containing CO2 gas

NASA Astrophysics Data System (ADS)

Kurniawan, Budi Agung; Pratiwi, Vania Mitha; Ahmadi, Nafi'ul Fikri

2018-04-01

Corrosion become major problem in most industries. In the oil and gas company, corrosion occurs because of reaction between steel and chemical species inside crude oil. Crude oil or nature gas provide corrosive species, such as CO2, O2, H2S and so on. Fluid containing CO2 gas causes CO2 corrosion which attack steel as well as other corrosion phenomena. This CO2 corrosion commonly called as sweet environment and produce FeCO3 as corrosion products. Fluid flow factor in pipelines during the oil and gas transportation might increase the rate of corrosion itself. Inhibitor commonly use used as corrosion protection because its simplicity in usage. Nowadays, organic inhibitor become main issue in corrosion protection because of biodegradable, low cost, and environmental friendly. This research tried to use tobacco leaf extract as organic inhibitor to control corrosion in CO2 environment. The electrolyte solution used was 3.5% NaCl at pH 4 and pH 7. Weight loss test results showed that the lowest corrosion rate was reach at 132.5 ppm inhibitor, pH 7 and rotational speed of 150 rpm with corrosion rate of 0.091 mm/y. While at pH 4, the lowest corrosion rate was found at rotational speed of 150 rpm with inhibitor concentration of 265 ppm and corrosion rate of 0.327 mm/y. FTIR results indicate the presence of nicotine functional groups on the steel surface. However, based on corrosion rate, it is believed that corrosion occurs, and FeCO3 was soluble in electrolyte. Tobacco leaf extract inhibitors worked by a physisorption mechanism, where tobacco inhibitors formed thin layer on the steel surface.

ISSUES IN DEVELOPING A TWO-GENERATION AVIAN TOXICITY TEST WITH JAPANESE QUAIL

EPA Science Inventory

As a subgroup of the OECD Expert Group on Assessment of Endocrine Disrupting Effects in Birds, we reviewed unresolved methodological issures important for the development of a two-generation toxicity test, discussed advantages and disadvantages of alternative approaches, and prop...

Research projects lead by the USDA Cranberry Entomology Laboratory (CEL)

USDA-ARS?s Scientific Manuscript database

1. Newly discovered native nematode species represent bio-insecticides (grad student project) a. Problems being addressed: Issues over flea beetle control; unresolved questions over pesticide use during bloom. b. Discoveries: at least two native nematodes species new to science have been discovered ...

Planetary science and resource utilization at a lunar outpost - Chemical analytical facility requirements

NASA Technical Reports Server (NTRS)

Taylor, Lawrence A.

1992-01-01

Unresolved issues of lunar geology are reviewed and the role of a lunar outpost in helping to address them is considered. Plans for in situ resource utilization of lunar materials are examined. Concepts for a lunar outpost are described.

7 CFR 1940.307 - Environmental responsibilities within the State Office.

Code of Federal Regulations, 2010 CFR

2010-01-01

... any unresolved or difficult environmental issues in a timely manner; and (3) Incorporate into projects... 7 Agriculture 13 2010-01-01 2009-01-01 true Environmental responsibilities within the State Office..., DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL Environmental Program § 1940...

Metal surface corrosion grade estimation from single image

NASA Astrophysics Data System (ADS)

Chen, Yijun; Qi, Lin; Sun, Huyuan; Fan, Hao; Dong, Junyu

2018-04-01

Metal corrosion can cause many problems, how to quickly and effectively assess the grade of metal corrosion and timely remediation is a very important issue. Typically, this is done by trained surveyors at great cost. Assisting them in the inspection process by computer vision and artificial intelligence would decrease the inspection cost. In this paper, we propose a dataset of metal surface correction used for computer vision detection and present a comparison between standard computer vision techniques by using OpenCV and deep learning method for automatic metal surface corrosion grade estimation from single image on this dataset. The test has been performed by classifying images and calculating the accuracy for the two different approaches.

Delivery Issues in the Day Care Debate. Occasional Papers in Education: Paper No. 2 - Policy Studies of the Early Childhood Planning Project.

ERIC Educational Resources Information Center

McGee, Maureen

The question of who should provide day care services is an unresolved issue in the current day care debate and a topic now on the national agenda because it is the common concern of a constellation of diverse, highly motivated interest groups. Motivation for extending day care in the United States stems from several factors: among these are the…

Space station human productivity study. Volume 4: Issues

NASA Technical Reports Server (NTRS)

1985-01-01

The 305 Issues contained represent topics recommended for study in order to develop requirements in support of space station crew performance/productivity. The overall subject matter, space station elements affecting crew productivity, was organized into a coded subelement listing, which is included for the reader's reference. Each issue is numbered according to the 5-digit topical coding scheme. The requirements column on each Issue page shows a cross-reference to the unresolved requirement statement(s). Because topical overlaps were frequently encountered, many initial Issues were consolidated. Apparent gaps, therefore, may be accounted for by an Issue described within a related subelement. A glossary of abbreviations used throughout the study documentation is also included.

Identification of corrosion and damage mechanisms by using scanning electron microscopy and energy-dispersive X-ray microanalysis: contribution to failure analysis case histories

NASA Astrophysics Data System (ADS)

Pantazopoulos, G.; Vazdirvanidis, A.

2014-03-01

Emphasis is placed on the evaluation of corrosion failures of copper and machineable brass alloys during service. Typical corrosion failures of the presented case histories mainly focussed on stress corrosion cracking and dezincification that acted as the major degradation mechanisms in components used in piping and water supply systems. SEM assessment, coupled with EDS spectroscopy, revealed the main cracking modes together with the root-source(s) that are responsible for the damage initiation and evolution. In addition, fracture surface observations contributed to the identification of the incurred fracture mechanisms and potential environmental issues that stimulated crack initiation and propagation. Very frequently, the detection of chlorides among the corrosion products served as a suggestive evidence of the influence of working environment on passive layer destabilisation and metal dissolution.

Molecular Phylogenetics and the Perennial Problem of Homology.

PubMed

Inkpen, S Andrew; Doolittle, W Ford

2016-12-01

The concept of homology has a long history, during much of which the issue has been how to reconcile similarity and common descent when these are not coextensive. Although thinking molecular phylogeneticists have learned not to say "percent homology," the problems are deeper than that and unresolved.

The NII and the New World Trade Agreement.

ERIC Educational Resources Information Center

Smoot, Oliver

1994-01-01

Examines the relationship between the National Information Infrastructure (NII) and the new General Agreement on Tariffs and Trade. Topics discussed include the reduction or elimination of tariffs on NII products; protection of copyrighted works; unresolved trade issues, including the European telecommunications market; standards; and privacy and…

Uterine influences on conceptus development in fertility-classified heifers

USDA-ARS?s Scientific Manuscript database

A major unresolved issue is how the uterus influences infertility and subfertility in cattle. Serial embryo transfer was previously used to classify heifers as high fertile (HF), subfertile (SF), or infertile (IF). To assess pregnancy loss in those animals, two in vivo produced embryos were transfer...

Behavioral Assessment and Interventions in Youth Sports.

ERIC Educational Resources Information Center

Smith, Ronald E.; And Others

1996-01-01

Discusses the use of behavioral assessment for both descriptive and program evaluation purposes. Notes the use of behavioral assessment to study coaching behaviors and their effects on young athletes. Operant and cognitive-behavioral interventions have proven effective in both athletic and psychosocial outcomes. Discusses unresolved issues and…

Poetry as a Healing Experience for Teams.

ERIC Educational Resources Information Center

Bronson, Jim; Schaub, Nancy

Experiential practitioners have the opportunity to help groups move to a higher level of functioning, getting beyond unresolved emotional issues and becoming more truthful, immediate, involved, and collaborative. This critical process takes place along a continuum from "staying safe and shallow" at one end to "going deep and…

Assessment of the Effect of Pitting Corrosion on the Safe Life Prediction of the P-3C

DTIC Science & Technology

2007-12-01

here. They would also like to thank Emilio Matricciani for generating the loading spectrum used and Matthew Phillips for his provision of data and...Conference. 2003. Las Vegas : US Department of Defence. 8. Hoeppner, D.W., et al. Corrosion and Fretting as Critical Aviation Safety Issues. in

Robust superhydrophobic diamond microspheres for no-loss transport of corrosive liquid microdroplets.

PubMed

Wang, Qiang; Bai, Jie; Dai, Bing; Yang, Zhenhuai; Guo, Shuai; Yang, Lei; He, Yurong; Han, Jiecai; Zhu, Jiaqi

2017-02-16

Superhydrophobic surfaces usually lose their characteristics when exposed to a corrosive environment. To solve this issue, we synthesized superhydrophobic diamond microspheres by microwave-plasma-assisted chemical vapor deposition. Commercial epoxy glue was used to bond the microspheres to various substrates. The thus-synthesized composite films exhibited robust superhydrophobicity and an ultrahigh adhesive force.

Current NRC Perspectives Concerning Primary Water Stress Corrosion Cracking

NASA Astrophysics Data System (ADS)

Alley, David; Dunn, Darrell

Materials currently used in nuclear power plants are reliable and are generally resistant to environmental degradation. However, occurrences of environmental degradation have been observed as the current fleet of reactors ages. Primary water stress corrosion cracking (PWSCC) is of particular interest to the US Nuclear Regulatory Commission (NRC). This paper provides a historical assessment of operating experience associated with PWSCC and welding issues associated with PWSCC resistant materials. The paper also considers the regulatory issues associated with PWSCC, especially those associated with gaps in the understanding of the behavior of PWSCC resistant material under actual reactor conditions.

Corrosion Assessment of Candidate Materials for the SHINE Subcritical Assembly Vessel and Components FY15 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pawel, Steven J.

2016-01-01

In the previous report of this series, a literature review was performed to assess the potential for substantial corrosion issues associated with the proposed SHINE process conditions to produce 99Mo. Following the initial review, substantial laboratory corrosion testing was performed emphasizing immersion and vapor-phase exposure of candidate alloys in a wide variety of solution chemistries and temperatures representative of potential exposure conditions. Stress corrosion cracking was not identified in any of the exposures up to 10 days at 80°C and 10 additional days at 93°C. Mechanical properties and specimen fracture face features resulting from slow-strain rate tests further supported amore » lack of sensitivity of these alloys to stress corrosion cracking. Fluid velocity was found not to be an important variable (0 to ~3 m/s) in the corrosion of candidate alloys at room temperature and 50°C. Uranium in solution was not found to adversely influence potential erosion-corrosion. Potentially intense radiolysis conditions slightly accelerated the general corrosion of candidate alloys, but no materials were observed to exhibit an annualized rate above 10 μm/y.« less

Bullying by Definition: An Examination of Definitional Components of Bullying

ERIC Educational Resources Information Center

Goldsmid, Susan; Howie, Pauline

2014-01-01

Lack of definitional consensus remains an important unresolved issue within bullying research. This study examined the ability of definitional variables to predict overall level of victimisation (distress, power inequity, and provocation as predictors) and bullying (intention to harm, power inequity, and provocation as predictors) in 246…

Structured Ethical Reflection in Practitioner Inquiry: Theory, Pedagogy, and Practice

ERIC Educational Resources Information Center

Stevens, Douglas M.; Brydon-Miller, Mary; Raider-Roth, Miriam

2016-01-01

Practitioner inquiry provides a powerful tool for improving practice and addressing critical issues in classrooms, schools, and broader communities. However, it also raises unique ethical challenges that often go unrecognized and unresolved. Structured Ethical Reflection (SER) provides teacher researchers with a process for identifying core values…

Determination of Passing Scores on Certification Examinations: An Unresolved Issue.

ERIC Educational Resources Information Center

Karni, Karen R.; Lofsness, Karen G.

1985-01-01

This study examined the results obtained from certification applicants and practitioners on a national certification examination for clinical laboratory scientists (medical technologists), using a modified Angoff procedure to establish the cut-off score. The major question of the investigation concerned whether the cut-off score was appropriate.…

Student Personnel Administration and the Adult Learner: An Unresolved Issue.

ERIC Educational Resources Information Center

Watson, Rollin J.

The role of college student personnel administration in serving adult learners is considered. Historical trends in the student personnel function and the philosophy that student personnel workers are educators who create programs that contribute to the student's overall educational growth are examined. Changes for the student development personnel…

12 CFR 5.34 - Operating subsidiaries.

Code of Federal Regulations, 2012 CFR

2012-01-01

... entity if: (A) The bank has the ability to control the management and operations of the subsidiary; (B... entity is a corporation, limited liability company, or limited partnership; and (3) The bank: (i) Has the... analysis if the proposal is novel, unusually complex, or raises substantial unresolved legal issues. In...

12 CFR 5.34 - Operating subsidiaries.

Code of Federal Regulations, 2013 CFR

2013-01-01

... entity if: (A) The bank has the ability to control the management and operations of the subsidiary; (B... entity is a corporation, limited liability company, or limited partnership; and (3) The bank: (i) Has the... analysis if the proposal is novel, unusually complex, or raises substantial unresolved legal issues. In...

12 CFR 5.34 - Operating subsidiaries.

Code of Federal Regulations, 2014 CFR

2014-01-01

... entity if: (A) The bank has the ability to control the management and operations of the subsidiary; (B... entity is a corporation, limited liability company, or limited partnership; and (3) The bank: (i) Has the... analysis if the proposal is novel, unusually complex, or raises substantial unresolved legal issues. In...

Mode(s) of action of arsenic-induced tumors and toxicity.

EPA Science Inventory

Although arsenic has long been known for its toxicity and carcinogenicity, it is unknown exactly how these adverse health effects ocurr. Three of the biggest unresolved issues in arsenic exposures and adverse health effects are (a) what is (are) the mode of action (MOA)(s) of ar...

Accounting for sub-pixel variability of clouds and/or unresolved spectral variability, as needed, with generalized radiative transfer theory

DOE PAGES

Davis, Anthony B.; Xu, Feng; Collins, William D.

2015-03-01

Atmospheric hyperspectral VNIR sensing struggles with sub-pixel variability of clouds and limited spectral resolution mixing molecular lines. Our generalized radiative transfer model addresses both issues with new propagation kernels characterized by power-law decay in space.

Brain Responses to Filled Gaps

ERIC Educational Resources Information Center

Hestvik, Arild; Maxfield, Nathan; Schwartz, Richard G.; Shafer, Valerie

2007-01-01

An unresolved issue in the study of sentence comprehension is whether the process of gap-filling is mediated by the construction of empty categories (traces), or whether the parser relates fillers directly to the associated verb's argument structure. We conducted an event-related potentials (ERP) study that used the violation paradigm to examine…

Androgyny as Trait and as Role: Unresolved Issues.

ERIC Educational Resources Information Center

Spence, Janet T.

In the late 1970's androgyny as a concept gained respectability, accompanied, however, by a backlash. Debate centered primarily on scientific grounds and both sides failed to define the concepts of masculinity, femininity and androgyny, including possible cultural relativity. Most empirical research on androgyny uses either the BSRI or the PAQ…

Sexuality and the Curriculum: The Politics and Practices of Sexuality Education. Critical Issues in the Curriculum.

ERIC Educational Resources Information Center

Sears, James T., Ed.

This book of essays explores the explicit and hidden curriculum of sexuality from kindergarten through college. The 15 interrelated essays challenge conventional assumptions regarding sexuality and the curriculum by applying non-traditional perspectives to traditionally unresolved problems while proposing specific curricular strategies and…

Traumatic Brain Injury and Vocational Rehabilitation.

ERIC Educational Resources Information Center

Corthell, David W., Ed.

Intended to serve as a resource guide on traumatic brain injury for rehabilitation practitioners, the book's 10 chapters are grouped into sections which provide an introduction and examine aspects of evaluation, treatment and placement planning, and unresolved issues. Chapters have the following titles and authors: "Scope of the Problem" (Marilyn…

"My Mom and Her Boyfriend Fuss": A Five-Minute RAP

ERIC Educational Resources Information Center

Laursen, Erik K.; Whindleton, Kendra

2012-01-01

Unresolved issues from home often spill over into behavior problems at school. This article discusses the five-minute RAP techniques: (1) connect; (2) clarify; and (3) restore. The authors present a case study wherein this brief restorative intervention had been a successful alternative to punishment and exclusion.

The future of microarray technology: networking the genome search.

PubMed

D'Ambrosio, C; Gatta, L; Bonini, S

2005-10-01

In recent years microarray technology has been increasingly used in both basic and clinical research, providing substantial information for a better understanding of genome-environment interactions responsible for diseases, as well as for their diagnosis and treatment. However, in genomic research using microarray technology there are several unresolved issues, including scientific, ethical and legal issues. Networks of excellence like GA(2)LEN may represent the best approach for teaching, cost reduction, data repositories, and functional studies implementation.

Biotechnology patent challenged: ex-colleague seeks share of the credit.

PubMed

Budiansky, Stephen

1982-11-25

Dr. Robert Helling, supported by the University of Michigan, has decided to press a claim to co-ownership of two Cohen-Boyer genetic engineering patents assigned to Stanford and the University of California. This decision will likely delay further the issuing of the second patent, tentatively rejected by the Patent Office in part on the basis of Helling's unresolved role. It may also increase pressure for a re-examination of the first patent issued in 1980.

Heat pipe heat transport system for the Stirling Space Power Converter (SSPC)

NASA Technical Reports Server (NTRS)

Alger, Donald L.

1992-01-01

Life issues relating to a sodium heat pipe heat transport system are described. The heat pipe system provides heat, at a temperature of 1050 K, to a 50 kWe Stirling engine/linear alternator power converter called the Stirling Space Power Converter (SSPC). The converter is being developed under a National Aeronautics and Space Administration program. Since corrosion of heat pipe materials in contact with sodium can impact the life of the heat pipe, a literature review of sodium corrosion processes was performed. It was found that the impurity reactions, primarily oxygen, and dissolution of alloy elements were the two corrosion process likely to be operative in the heat pipe. Approaches that are being taken to minimize these corrosion processes are discussed.

Corrosion Issues in Solder Joint Design and Service

DOE Office of Scientific and Technical Information (OSTI.GOV)

VIANCO,PAUL T.

1999-11-24

Corrosion is an important consideration in the design of a solder joint. It must be addressed with respect to the service environment or, as in the case of soldered conduit, as the nature of the medium being transported within piping or tubing. Galvanic-assisted corrosion is of particular concern, given the fact that solder joints are comprised of different metals or alloy compositions that are in contact with one-another. The (thermodynamic) potential for corrosion to take place in a particular environment requires the availability of the galvanic series for those conditions and which includes the metals or alloys in question. However,more » the corrosion kinetics, which actually determine the rate of material loss under the specified service conditions, are only available through laboratory evaluations or field data that are found in the existing literature or must be obtained by in-house testing.« less

76 FR 10288 - Airworthiness Directives; The Boeing Company Model 767-200, -300, -300F, and -400ER Series Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

... and corrosion to an area within five inches of the fail-safe strap. Revision 2 of this service.... The existing AD currently requires inspections to detect cracking or corrosion of the fail-safe straps... corrective actions. Since we issued that AD, we have received additional reports of cracks in 51 fail-safe...

Corrosion detection in reinforced concrete roadways and bridges via embedded fiber optic sensors

NASA Astrophysics Data System (ADS)

Fuhr, Peter L.; Huston, Dryver R.

1998-04-01

The problems associated with the application of chloride-based deicing agents to roadways and specifically bridges include chemical pollution and accelerated corrosion of strength members (especially the rebar) within the structure. In many instances, local ordnances are attempting to force state agencies to reduce, if not eliminate, the use of these chlorides (typically at the cost of increased driving hazards). With respect to the corrosion aspects of chloride application, cracks that occur in the roadway/bridge pavement allow water to seep into the pavement carrying the chloride to the rebar with the resultant increase in corrosion. In tandem with these efforts has been the continuing use of embedded fiber optic sensors for identification of faults or cracks within a highway structure - i.e., structural health monitoring. In this paper, we present multiple-parameter sensing fiber optic sensors which may be embedded into roadway and bridge structures to provide an internal measurement and assessment of its health. Such issues are paramount in determining if remedial or preventative maintenance should be performed on such structures. Laboratory results, comparisons with conventional sensing methods as well as a review of real-world issues in highway sensing are presented.

Experiments and models of general corrosion and flow-assisted corrosion of materials in nuclear reactor environments

NASA Astrophysics Data System (ADS)

Cook, William Gordon

Corrosion and material degradation issues are of concern to all industries. However, the nuclear power industry must conform to more stringent construction, fabrication and operational guidelines due to the perceived additional risk of operating with radioactive components. Thus corrosion and material integrity are of considerable concern for the operators of nuclear power plants and the bodies that govern their operations. In order to keep corrosion low and maintain adequate material integrity, knowledge of the processes that govern the material's breakdown and failure in a given environment are essential. The work presented here details the current understanding of the general corrosion of stainless steel and carbon steel in nuclear reactor primary heat transport systems (PHTS) and examines the mechanisms and possible mitigation techniques for flow-assisted corrosion (FAC) in CANDU outlet feeder pipes. Mechanistic models have been developed based on first principles and a 'solution-pores' mechanism of metal corrosion. The models predict corrosion rates and material transport in the PHTS of a pressurized water reactor (PWR) and the influence of electrochemistry on the corrosion and flow-assisted corrosion of carbon steel in the CANDU outlet feeders. In-situ probes, based on an electrical resistance technique, were developed to measure the real-time corrosion rate of reactor materials in high-temperature water. The probes were used to evaluate the effects of coolant pH and flow on FAC of carbon steel as well as demonstrate of the use of titanium dioxide as a coolant additive to mitigated FAC in CANDU outlet feeder pipes.

Structural Effects of Reinforced Concrete Beam Due to Corrosion

NASA Astrophysics Data System (ADS)

Noh, Hamidun Mohd; Idris, Nur'ain; Noor, Nurazuwa Md; Sarpin, Norliana; Zainal, Rozlin; Kasim, Narimah

2018-03-01

Corrosion of steel in reinforced concrete is one of the main issues among construction stakeholders. The main consequences of steel corrosion include loss of cross section of steel area, generation of expansive pressure which caused cracking of concrete, spalling and delaminating of the concrete cover. Thus, it reduces the bond strength between the steel reinforcing bar and concrete, and deteriorating the strength of the structure. The objective of this study is to investigate the structural effects of corrosion damage on the performance of reinforced concrete beam. A series of corroded reinforced concrete beam with a corrosion rate of 0%, 20% and 40% of rebar corrosion is used in parametric study to assess the influence of different level of corrosion rate to the structural performance. As a result, the used of interface element in the finite element modelling predicted the worst case of corrosion analysis since cracks is induced and generate at this surface. On the other hand, a positive linear relationship was sketched between the increase of expansive pressure and the corrosion rate. Meanwhile, the gradient of the graph is decreased with the increase of steel bar diameter. Furthermore, the analysis shows that there is a significant effect on the load bearing capacity of the structure where the higher corrosion rate generates a higher stress concentration at the mid span of the beam. This study could predict the residual strength of reinforced concrete beam under the corrosion using the finite element analysis. The experimental validation is needed on the next stage to investigate the quantitative relation between the corrosion rate and its influence on the mechanical properties.

Fatigue performance of blade steel T552 in a corrosive environment

NASA Astrophysics Data System (ADS)

Janoušek, J.; Hřeben, S.; Špirit, Z.; Strejcius, J.; Kasl, J.

2017-02-01

This contribution is based on an experimental programme which deals with the issue of blade steel T552 corrosion fatigue damage. The specimens were taken from a reference material delivered for blade production and tested in a corrosion cell under pre-stress of 300 MPa. A chloride solution of 35 ppm was chosen as the environment at a temperature of 80 °C. Such an environment can be considered as the limit state that should not occur during the operating regime. The results are summarized and compared with experiments conducted at another workplace.

Work–Family Conflict and Health Among Working Parents: Potential Linkages for Family Studies and Social Neuroscience

PubMed Central

Grzywacz, Joseph G.; Smith, Amy M.

2016-01-01

In this paired article the authors review research on paid work, parenting, and health in order to isolate fundamental questions and issues that remain unaddressed. Next, consistent with the theme of this special issue, the authors introduce social neuroscience and highlight how this emerging multidisciplinary science offers substantial promise for advancing key unresolved issues in the paid work, parenting, and health literature. The article concludes with suggestions for promising areas of research wherein family scientists and social neuroscientists could build collaborative research to address gaps in the work–family literature. PMID:27840467

Corrosion control of carbon steel using inhibitor of banana peel extract in acid diluted solutions

NASA Astrophysics Data System (ADS)

Komalasari; Utami, S. P.; Fermi, M. I.; Aziz, Y.; Irianti, R. S.

2018-04-01

Issues of corrosion happened in pipes, it was used as fluid transportation in the chemical industry. Corrosion cannot be preventing, however it could be controlled or blocked. Inhibitor addition is one of the method to control the corrosion inside the pipe. Corrosion inhibitors consisted of inorganic and organic compound inhibitors. Organic inhibitor is composed from synthetic and natural material. This study focused to evaluate the inhibition’s efficiency from banana peel to carbon steel in different concentration of inhibitor and immersing time in acid solution variation. The research employed inhibitor concentration of 0 gram/liter, 2 gram/liter, 4 gram/liter and 6 gram/liter, immersed time of carbon steel for 2, 4, 6, 8 and 10 hours. It was immersed in chloride acid solution of 0.5 M and 1.5 M. Carbon Steel AISI 4041 was used as specimen steel. Results were analyzed using corrosion rate evaluation for each specimens and inhibitor efficiencies determination. It was found that the specimen without inhibitor yielded fast corrosion rate in long immersing time and high concentration of HCl. However, the specimens with inhibitor gave lowest corrosion rate which was 78.59% for 6 gram/litre and 10 hours in 0.5 M HCl.

A literature review of in situ transmission electron microscopy technique in corrosion studies.

PubMed

Song, Zhengwei; Xie, Zhi-Hui

2018-06-18

One of the biggest challenges in corrosion investigation is foreseeing precisely how and where materials will degenerate in a designated condition owing to scarceness of accurate corrosion mechanisms. Recent fast development of in situ transmission electron microscopy (TEM) technique makes it achievable to better understand the corrosion mechanism and physicochemical processes at the interfaces between samples and gases or electrolytes by dynamical capture the microstructural and chemical changes with high resolution within a realistic or near-realistic environment. However, a detailed and in-depth account summing up the development and latest achievements of in situ TEM techniques, especially the application of emerging liquid and electrochemical cells in the community of corrosion study in the last several years is lacking and is urgently needed for its heathy development. To fill this gap, this critical review summarizes firstly the key scientific issues in corrosion research, followed by introducing the configurations of several typical closed-type cells. Then, the achievements of in situ TEM using open-type or closed-type cells in corrosion study are presented in detail. The study directions in the future are commented finally in terms of spatial and temporal resolution, electron radiation, and linkage between microstructure and electrochemical performance in corrosion community. Copyright © 2018 Elsevier Ltd. All rights reserved.

Collins Center Update. Volume 15, Issue 3. April-June 2013

DTIC Science & Technology

2013-06-01

and unresolved boundary issues with Mali, Niger , and Benin . Within this security environment the Burkinabe Armed Forces are working with the U.S...Analytical Exchanges at Collins Hall • Burkina Faso Military Strategy Review Phase II • Joint Land, Air and Sea Strategic Exercise (JLASS-EX) 2013...Prescribed by ANSI Std Z39-18 2 C S L D Burkina Faso Military Strategy Review Phase II Prof. B.F. Griffard and Prof. Bert B. Tussing Center for Strategic

Corrosion and stress corrosion cracking in supercritical water

NASA Astrophysics Data System (ADS)

Was, G. S.; Ampornrat, P.; Gupta, G.; Teysseyre, S.; West, E. A.; Allen, T. R.; Sridharan, K.; Tan, L.; Chen, Y.; Ren, X.; Pister, C.

2007-09-01

Supercritical water (SCW) has attracted increasing attention since SCW boiler power plants were implemented to increase the efficiency of fossil-based power plants. The SCW reactor (SCWR) design has been selected as one of the Generation IV reactor concepts because of its higher thermal efficiency and plant simplification as compared to current light water reactors (LWRs). Reactor operating conditions call for a core coolant temperature between 280 °C and 620 °C at a pressure of 25 MPa and maximum expected neutron damage levels to any replaceable or permanent core component of 15 dpa (thermal reactor design) and 100 dpa (fast reactor design). Irradiation-induced changes in microstructure (swelling, radiation-induced segregation (RIS), hardening, phase stability) and mechanical properties (strength, thermal and irradiation-induced creep, fatigue) are also major concerns. Throughout the core, corrosion, stress corrosion cracking, and the effect of irradiation on these degradation modes are critical issues. This paper reviews the current understanding of the response of candidate materials for SCWR systems, focusing on the corrosion and stress corrosion cracking response, and highlights the design trade-offs associated with certain alloy systems. Ferritic-martensitic steels generally have the best resistance to stress corrosion cracking, but suffer from the worst oxidation. Austenitic stainless steels and Ni-base alloys have better oxidation resistance but are more susceptible to stress corrosion cracking. The promise of grain boundary engineering and surface modification in addressing corrosion and stress corrosion cracking performance is discussed.

Accountability as a Way Forward for Privacy Protection in the Cloud

NASA Astrophysics Data System (ADS)

Pearson, Siani; Charlesworth, Andrew

The issue of how to provide appropriate privacy protection for cloud computing is important, and as yet unresolved. In this paper we propose an approach in which procedural and technical solutions are co-designed to demonstrate accountability as a path forward to resolving jurisdictional privacy and security risks within the cloud.

Contextual E-Learning Evaluation: A Preliminary Framework

ERIC Educational Resources Information Center

Voigt, Christian; Swatman, Paula M. C.

2004-01-01

The evaluation of solutions is a major unresolved issue for all those involved in e-learning. In this paper we illustrate the importance of context by means of a qualitative comparison of two e-learning prototype implementations--an action research case undertaken in conjunction with a major German insurance company; and a more experimental…

Iterative Purification and Effect Size Use with Logistic Regression for Differential Item Functioning Detection

ERIC Educational Resources Information Center

French, Brian F.; Maller, Susan J.

2007-01-01

Two unresolved implementation issues with logistic regression (LR) for differential item functioning (DIF) detection include ability purification and effect size use. Purification is suggested to control inaccuracies in DIF detection as a result of DIF items in the ability estimate. Additionally, effect size use may be beneficial in controlling…

Franchise competition in the electric utility industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vince, C.A.; Fogel, J.C.

Franchise competition is - and should be - an integral part of enhanced competition. It serves the traditional goal of encouraging lower costs through the threat of takeover or purchase. However, the issue of utility recovery for stranded costs stands as a major unresolved question affecting customers` ability to partake of this central aspect of competition.

Special Education History, Current Status and Future: India

ERIC Educational Resources Information Center

Antony, Pavan John

2013-01-01

Education of all children in public schools, including those with disabilities, continues to be an unresolved issue in many countries around the globe. While education of all children is mandated by law and considered a basic human right in many countries, the current status of implementation varies. India, for example, is an ancient country that…

Framing and Assessing Classroom Opportunity to Learn: The Case of Mexico

ERIC Educational Resources Information Center

Jensen, Bryant; Pérez Martínez, María Guadalupe; Aguilar Escobar, Angélica

2016-01-01

Educational policy in Mexico and throughout Latin America is shifting focus from school access to school quality. Improving "quality" is often interpreted as enhancing student learning opportunities, but three issues remain unresolved: (a) what constitutes opportunity to learn (OTL) in classrooms; (b) how to assess classroom OTL (COTL);…

Collaborative Reasoning: Language-Rich Discussions for English Learners

ERIC Educational Resources Information Center

Zhang, Jie; Dougherty Stahl, Katherine A.

2012-01-01

Collaborative Reasoning (CR) is a peer-led, small group discussion approach that aims to promote intellectual and personal engagement in elementary school classrooms. In CR, students read a text that raises an unresolved issue with multiple and competing points of view. Students are expected to take positions on a big question, support the…

When Others' Performance Just Isn't Good Enough: Educational Leaders' Framing of Concerns in Private and Public

ERIC Educational Resources Information Center

Sinnema, Claire E. L.; Le Fevre, Deidre; Robinson, Viviane M. J.; Pope, Denyse

2013-01-01

Effective instructional leadership demands that leaders address the inevitable problems and concerns that exist in any educational organization. Unfortunately, much evidence suggests that many important concerns, including teacher performance issues, continue to be unaddressed and unresolved. This article portrays the nature of concerns facing 77…

The giant panda gut microbiome.

PubMed

Wei, Fuwen; Wang, Xiao; Wu, Qi

2015-08-01

Giant pandas (Ailuropoda melanoleuca) are bamboo specialists that evolved from carnivores. Their gut microbiota probably aids in the digestion of cellulose and this is considered an example of gut microbiota adaptation to a bamboo diet. However, this issue remains unresolved and further functional and compositional studies are needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Idiosyncratic Genetic Specificity for Neurolinguistic Systems: A Cause of Atypical or Delayed Language Acquisition.

ERIC Educational Resources Information Center

Lamendella, John T.

The diagnostic problem presented by children without obvious neurological, cognitive, genetic, emotional or environmental basis for their atypical or delayed language development is discussed. One unresolved issue is whether the deficits of such dysphasic children are linguistic or are more fundamental cognitive or perceptuomotor deficits. A…

The Role of Broca's Area in Sentence Comprehension

ERIC Educational Resources Information Center

Rogalsky, Corianne; Hickok, Gregory

2011-01-01

The role of Broca's area in sentence processing has been debated for the last 30 years. A central and still unresolved issue is whether Broca's area plays a specific role in some aspect of syntactic processing (e.g., syntactic movement, hierarchical structure building) or whether it serves a more general function on which sentence processing…

Learning How They Learn: A Review of the Literature on Learning Styles.

ERIC Educational Resources Information Center

Wilson, Vicki A.

The literature on learning styles is full of unresolved issues, both theoretical and practical. Early research into learning styles includes that of H. A. Witkin, who developed the Embedded Figures Test in the late 1960s. This test determines the "field dependence" or "field independence" of individuals, marking their global…

Widening Access to Scottish Higher Education: Unresolved Issues and Future Challenges

ERIC Educational Resources Information Center

Riddell, Sheila

2016-01-01

Despite the Scottish Government's frequent affirmation of its commitment to social justice principles, there has of late been a recognition of the need for firmer action to tackle the social class gap in higher education participation, reflecting wider social inequalities in Scotland. In a recent policy statement, Angela Constance, Cabinet…

Causal Indicator Models: Unresolved Issues of Construction and Evaluation

ERIC Educational Resources Information Center

West, Stephen G.; Grimm, Kevin J.

2014-01-01

These authors agree with Bainter and Bollen that causal effects represents a useful measurement structure in some applications. The structure of the science of the measurement problem should determine the model; the measurement model should not determine the science. They also applaud Bainter and Bollen's important reminder that the full…

The Influence of Management on the Cost of Fire Protection

ERIC Educational Resources Information Center

Donahue, Amy K.

2004-01-01

An important and unresolved issue central to the study of government performance is how the actions of managers and the nature of organizations affect the cost of public services. This paper presents an empirical analysis of fire departments that estimates the influence of managerial choices on per capita spending within a simultaneous public…

Chocolate and cardiovascular health: is it too good to be true?

PubMed

Ariefdjohan, Merlin W; Savaiano, Dennis A

2005-12-01

Recent findings indicate that cocoa and chocolate, when processed appropriately, may contain relatively large amounts of flavonoids, particularly catechin and epicatechin. We review the benefits of these flavonoids, specifically with regard to cardiovascular health, and raise several unresolved issues that suggest the need for additional research and product development in this area.

Risk Management: the Economics and Mor ality of Safety Revisited

NASA Astrophysics Data System (ADS)

Adams, John

The introduction to the proceedings of the Royal Academy of Engineering 2006 seminar on The Economics and Morality of Safety (RAEng 2006) concluded with a list of issues that were ‘worthy of further exploration’. I have reduced them to the following questions: Why do moral arguments about ‘rights’ persist unresolved?

Tri-Service Corrosion Conference

DTIC Science & Technology

2002-01-18

PREVENTION / CASE STUDIES 63 Issues in the Measurement of Volatile Organic Compounds (VOC’S) in New- 64 Generation Low-VOC Marine Coatings for...Bell Lab’s Corrosion Preventive Compound (MIL-L-87177A Grade B) 95 David H. Horne,ChE., P.E. The Operational Testing of the CPC ACF-50 on the...A. Matzdorf Low Volatile Organic Compound (VOC) Chemical Agent Resistant Coating 601 (CARC) Application Demonstration/Validation Lisa Weiser

75 FR 47242 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-14, DC-9-15, and DC-9-15F...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-05

... the inboard side of the rear spar upper cap, which resulted from stress corrosion. We are proposing... the left or right center wing rear spar, which could cause a possible fuel leak, damage to the wing... the center wing rear spar that resulted from stress corrosion. We issued that AD to detect and correct...

USMC Environmental and Corrosion Control Issues

DTIC Science & Technology

2010-12-01

b. ABSTRACT unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Minimizing Hexavalent Chromium ...cadmium – Use of hexavalent chromium – Potential incompatibilities with alternatives – Use of non-corrosion resistant hardware in harsh...on non-chrome and trivalent -chrome alternatives • Favor non-cadmium hardware • Concern with logistics and supply chain of many alternatives Pre

An Industrial Perspective on Environmentally Assisted Cracking of Some Commercially Used Carbon Steels and Corrosion-Resistant Alloys

NASA Astrophysics Data System (ADS)

Ashida, Yugo; Daigo, Yuzo; Sugahara, Katsuo

2017-08-01

Commercial metals and alloys like carbon steels, stainless steels, and nickel-based super alloys frequently encounter the problem of environmentally assisted cracking (EAC) and resulting failure in engineering components. This article aims to provide a perspective on three critical industrial applications having EAC issues: (1) corrosion and cracking of carbon steels in automotive applications, (2) EAC of iron- and nickel-based alloys in salt production and processing, and (3) EAC of iron- and nickel-based alloys in supercritical water. The review focuses on current industrial-level understanding with respect to corrosion fatigue, hydrogen-assisted cracking, or stress corrosion cracking, as well as the dominant factors affecting crack initiation and propagation. Furthermore, some ongoing industrial studies and directions of future research are also discussed.

Research and development issues for molten carbonate fuel cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krumpelt, M.

1996-04-01

This paper describes issues pertaining to the development of molten carbonate fuel cells. In particular, the corrosion resistance and service life of nickel oxide cathodes is described. The resistivity of lithium oxide/iron oxides and improvement with doping is addressed.

Morphological and physicochemical characteristics of iron corrosion scales formed under different water source histories in a drinking water distribution system.

PubMed

Yang, Fan; Shi, Baoyou; Gu, Junnong; Wang, Dongsheng; Yang, Min

2012-10-15

The corrosion scales on iron pipes could have great impact on the water quality in drinking water distribution systems (DWDS). Unstable and less protective corrosion scale is one of the main factors causing "discolored water" issues when quality of water entering into distribution system changed significantly. The morphological and physicochemical characteristics of corrosion scales formed under different source water histories in duration of about two decades were systematically investigated in this work. Thick corrosion scales or densely distributed corrosion tubercles were mostly found in pipes transporting surface water, but thin corrosion scales and hollow tubercles were mostly discovered in pipes transporting groundwater. Magnetite and goethite were main constituents of iron corrosion products, but the mass ratio of magnetite/goethite (M/G) was significantly different depending on the corrosion scale structure and water source conditions. Thick corrosion scales and hard shell of tubercles had much higher M/G ratio (>1.0), while the thin corrosion scales had no magnetite detected or with much lower M/G ratio. The M/G ratio could be used to identify the characteristics and evaluate the performances of corrosion scales formed under different water conditions. Compared with the pipes transporting ground water, the pipes transporting surface water were more seriously corroded and could be in a relatively more active corrosion status all the time, which was implicated by relatively higher siderite, green rust and total iron contents in their corrosion scales. Higher content of unstable ferric components such as γ-FeOOH, β-FeOOH and amorphous iron oxide existed in corrosion scales of pipes receiving groundwater which was less corroded. Corrosion scales on groundwater pipes with low magnetite content had higher surface area and thus possibly higher sorption capacity. The primary trace inorganic elements in corrosion products were Br and heavy metals. Corrosion products obtained from pipes transporting groundwater had higher levels of Br, Ti, Ba, Cu, Sr, V, Cr, La, Pb and As. Copyright © 2012 Elsevier Ltd. All rights reserved.

Fretting and Corrosion Between a Metal Shell and Metal Liner May Explain the High Rate of Failure of R3 Modular Metal-on-Metal Hips.

PubMed

Ilo, Kevin C; Derby, Emma J; Whittaker, Robert K; Blunn, Gordon W; Skinner, John A; Hart, Alister J

2017-05-01

The R3 acetabular system used with its metal liner has higher revision rates when compared to its ceramic and polyethylene liner. In June 2012, the medical and healthcare products regulatory agency issued an alert regarding the metal liner of the R3 acetabular system. Six retrieved R3 acetabular systems with metal liners underwent detailed visual analysis using macroscopic and microscopic techniques. Visual analysis discovered corrosion on the backside of the metal liners. There was a distinct border to the areas of corrosion that conformed to antirotation tab insertions on the inner surface of the acetabular shell, which are for the polyethylene liner. Scanning electron microscopy indicated evidence of crevice corrosion, and energy-dispersive X-ray analysis confirmed corrosion debris rich in titanium. The high failure rate of the metal liner option of the R3 acetabular system may be attributed to corrosion on the backside of the liner which appear to result from geometry and design characteristics of the acetabular shell. Copyright © 2016 Elsevier Inc. All rights reserved.

Preceedings of the International Congress (12th), Corrosion Control for Low-Cost Reliability, Held in Houston, Texas on September 19 -24, 1993. Volume 3A. Corrosion: Specific Issues.

DTIC Science & Technology

1993-09-24

Environmental Safety - nad Irreconcilable Antagonism in the Chemical 097 Application of Electrochemical Impedance Spectroscopy to Study Process Industry the...195 569 Study of Enameling Properties on the Hot-RolledTi-Containing 044 Compatability of Organic Coatings with Flame Spraying...204 COATINGS METALLIC COATING AND SURFACE TREATMENTS 025 Study of Anticorrosion Properties

Remote detection of stress corrosion cracking: Surface composition and crack detection

NASA Astrophysics Data System (ADS)

Lissenden, Cliff J.; Jovanovic, Igor; Motta, Arthur T.; Xiao, Xuan; Le Berre, Samuel; Fobar, David; Cho, Hwanjeong; Choi, Sungho

2018-04-01

Chloride induced stress corrosion cracking (SCC) of austenitic stainless steel is a potential issue in long term dry storage of spent nuclear fuel canisters. In order for SCC to occur there must be a corrosive environment, a susceptible material, and a driving force. Because it is likely that the material in the heat affected zone (HAZ) of welded stainless steel structures has been sensitized as a result of chromium depletion at the grain boundaries and a thermal residual stress driving force is likely present if solution annealing is not performed, two issues are critical. Is the environment corrosive, i.e., are chlorides present in solution on the surface? And then, are there cracks that could propagate? Remote detection of chlorides on the surface can be accomplished by laser induced breakdown spectroscopy (LIBS), while cracks can be detected by shear horizontal guided waves generated by electromagnetic acoustic transducers (EMATs). Both are noncontact methods that are amenable to robotic delivery systems and harsh environments. The sensitivity to chlorine on stainless steel of a LIBS system that employs optical fiber for pulse delivery is demonstrated. Likewise, the ability of the EMAT system to detect cracks of a prescribed size and orientation is shown. These results show the potential for remote detection of Cl and cracks in dry storage spent fuel canisters.

Oxidation and Corrosion of Ceramics and Ceramic Matrix Composites

NASA Technical Reports Server (NTRS)

Jacobson, Nathan S.; Opila, Elizabeth J.; Lee, Kang N.

2000-01-01

Ceramics and ceramic matrix composites are candidates for numerous applications in high temperature environments with aggressive gases and possible corrosive deposits. There is a growing realization that high temperature oxidation and corrosion issues must be considered. There are many facets to these studies, which have been extensively covered in some recent reviews. The focus of this paper is on current research, over the past two years. In the authors' view, the most important oxidation and corrosion studies have focused on four major areas during this time frame. These are; (I) Oxidation of precursor-based ceramics; (II) Studies of the interphase material in ceramic matrix composites; (III) Water vapor interactions with ceramics, particularly in combustion environments; and (IV) Development of refractory oxide coatings for silicon-based ceramics. In this paper, we shall explore the most current work in each of these areas.

Memory Retrieval Given Two Independent Cues: Cue Selection or Parallel Access?

ERIC Educational Resources Information Center

Rickard, Timothy C.; Bajic, Daniel

2004-01-01

A basic but unresolved issue in the study of memory retrieval is whether multiple independent cues can be used concurrently (i.e., in parallel) to recall a single, common response. A number of empirical results, as well as potentially applicable theories, suggest that retrieval can proceed in parallel, though Rickard (1997) set forth a model that…

Working Memory in Children with Learning Disabilities in Reading versus Spelling: Searching for Overlapping and Specific Cognitive Factors

ERIC Educational Resources Information Center

Brandenburg, Janin; Klesczewski, Julia; Fischbach, Anne; Schuchardt, Kirsten; Büttner, Gerhard; Hasselhorn, Marcus

2015-01-01

In transparent orthographies like German, isolated learning disabilities in either reading or spelling are common and occur as often as a combined reading and spelling disability. However, most issues surrounding the cognitive causes of these isolated or combined literacy difficulties are yet unresolved. Recently, working memory dysfunctions have…

Cooperative Learning: Homogeneous and Heterogeneous Grouping of Iranian EFL Learners in a Writing Context

ERIC Educational Resources Information Center

Zamani, Mona

2016-01-01

One of the important aspects of learning and teaching through cooperation is the group composition or grouping "who with whom". An unresolved issue is that of the superiority of heterogeneity or homogeneity in the structure of the groups. The present study was an attempt to investigate the impact that homogeneous and heterogeneous…

Differential Labeling of Mental Illness by Social Status: A New Look at an Old Problem

ERIC Educational Resources Information Center

Thoits, Peggy A.

2005-01-01

Whether the higher rates of mental hospitalization and involuntary treatment for marginal social groups are due to differential labeling or simply to the occurrence of higher rates of disorder in these groups remains unresolved. I reexamine this issue with data from the National Comorbidity Survey (N = 5,877) that allow comparisons between…

The U.S. draft guidance regarding population and individual bioequivalence approaches: comments by a research-based pharmaceutical company.

PubMed

Hauschke, D; Steinijans, V W

2000-10-30

Generally, the motivation for switching from average bioequivalence to population and/or individual bio-equivalence is well recognized in the light of certain limitations of the concept of average bioequivalence. However, this switch still results in unresolved issues which should be addressed before the regulatory guidance is finalized.

Independent Confirmatory Factor Analysis of the Cognitive Assessment System (CAS): What Does CAS Measure?

ERIC Educational Resources Information Center

Kranzler, John H.; Keith, Timothy Z.

1999-01-01

Uses confirmatory factor analysis (CFA) to address unresolved issues concerning the structure of the Cognitive Assessment System, a test of intelligence based upon the planning, attention, and simultaneous-successive (PASS) processes theory of human cognition. Results reveal that the CFA of the standardization data do not support use of the CAS…

Invention versus Direct Instruction: For Some Content, It's a Tie

ERIC Educational Resources Information Center

Chase, Catherine C.; Klahr, David

2017-01-01

An important, but as yet unresolved pedagogical question is whether discovery-oriented or direct instruction methods lead to greater learning and transfer. We address this issue in a study with 101 fourth and fifth grade students that contrasts two distinct instructional methods. One is a blend of discovery and direct instruction called…

Revisiting the Energy Crisis: How Far Have We Come?

ERIC Educational Resources Information Center

Feldman, David Lewis

1995-01-01

This article is a summary of discussions that took place at a symposium attended by scholars and policymakers on the legacy of the 1970s energy crisis. Examines enduring impacts and unresolved issues, the possibility of a future embargo-style crisis, and the future of energy policy. Discusses energy and environment in developing countries. (LZ)

The Marginalisation of Indigenous Students within School Mathematics and the Math Wars: Seeking Resolutions within Ethical Spaces

ERIC Educational Resources Information Center

Russell, Gale L.; Chernoff, Egan J.

2013-01-01

In mathematics education, there are (at least) two seemingly disparate and unethical issues that have been allowed to continue unresolved for decades: the math wars (traditional versus reform teaching and learning of mathematics) and the marginalisation of Indigenous students within K-12 mathematics. Willie Ermine, an Indigenous scholar, has…

Does Imagined Practice Help in Learning a Motor Skill?

ERIC Educational Resources Information Center

Winters, Lynn; Reisberg, Daniel

Several studies have shown an improvement in the performance of motor skills following imagined performance of the skill, or "mental practice." One unresolved issue has centered on whether the effect being observed is in fact a practice effect. As one alternative, the effect may be a simple instance of planning when to use a skill, or…

Microbes are trophic analogues of arthropods, mammals, and fish: Isotopic fingerprinting unites ‘green’ and ‘brown’ food webs

USDA-ARS?s Scientific Manuscript database

This work addresses a cross-cutting issue within the field of food-web ecology—the integration of the microbiome into trophic hierarchies. The nature and degree to which microbes may reconfigure the trophic identities of carnivore and omnivore groups have remained surprisingly unresolved. This means...

The Construct Validity of HPAT-Ireland for the Selection of Medical Students: Unresolved Issues and Future Research Implications

ERIC Educational Resources Information Center

Kelly, Maureen E.; O'Flynn, Siun

2017-01-01

Aptitude tests are widely used in selection. However, despite certain advantages their use remains controversial. This paper aims to critically appraise five sources of evidence for the construct validity of the Health Professions Admission Test (HPAT)-Ireland, an aptitude test used for selecting undergraduate medical students. The objectives are…

Cost Issues Unresolved in Chicago

ERIC Educational Resources Information Center

Sawchuk, Stephen

2012-01-01

Chicago teachers voted last week to suspend a 7-day-old strike, sending some 350,000 students back to the classroom and paving the way for the teaching force to vote on a tentative contract. But for many in the Windy City, the contract has raised another potentially tall hurdle: how the cash-strapped district will manage to pay for it. District…

Distractor Repetitions Retrieve Previous Responses and Previous Targets: Experimental Dissociations of Distractor-Response and Distractor-Target Bindings

ERIC Educational Resources Information Center

Giesen, Carina; Rothermund, Klaus

2014-01-01

Even an irrelevant distractor stimulus is integrated into event files. Subsequently repeating the distractor triggers retrieval of the event file; however, an unresolved issue concerns the question of "what" is retrieved by the distractor. While recent studies predominantly assume that the distractor retrieves the previous response, it…

Health Professionals' Views of Communication: Implications for Assessing Performance on a Health-Specific English Language Test

ERIC Educational Resources Information Center

Elder, Cathie; Pill, John; Woodward-Kron, Robyn; McNamara, Tim; Manias, Elizabeth; Webb, Gillian; McColl, Geoff

2012-01-01

The gap between linguistic and professional criteria is a widely acknowledged but unresolved issue in the teaching and assessment of languages for specific purposes (LSP). In the teaching of professional writing, language experts and workplace professionals have been characterized as living worlds apart with respect to their views of…

Family Interaction in the Newborn Period: Some Findings, Some Observations, and Some Unresolved Issues.

ERIC Educational Resources Information Center

Parke, Ross D.

This paper presents two studies which explored the manner in which the father interacts with his newborn infant and compared paternal and maternal interaction patterns. In contrast to earlier studies, a direct observational approach was employed that permitted a detailed specification of father behaviors in the presence of the newborn. In the…

Corrosion barriers processed by Al electroplating and their resistance against flowing Pb-15.7Li

NASA Astrophysics Data System (ADS)

Krauss, Wolfgang; Konys, Jürgen; Wulf, Sven-Erik

2014-12-01

In the HCLL blanket design, ferritic-martensitic steels are in direct contact with the flowing liquid breeder Pb-15.7Li and have to withstand severe corrosion attack. Beyond corrosion, T-permeation from the breeder into the RAFM-steels is also an important issue and has to be reduced significantly. Earlier work showed that Al-based coatings can act as barriers for both, however, applied processes e.g. HDA or VPS exhibited strong drawbacks in the past. Meanwhile new industrial relevant coating processes, using electroplating technology are under development and called ECA (electrochemical aluminization) and ECX (electrochemical deposition from ionic liquids) process. In this study electrochemically Al-coated and heat-treated Eurofer samples were tested in PICOLO loop for exposure times up to 12,000 h (ECA) and 2000 h (first results ECX) respectively to determine corrosion properties in flowing Pb-15.7Li (550 °C, 0.1 m/s). Cross section analysis afterward corrosion testing proved the ability of thin Al-based barriers made by electrochemical techniques to protect the bare Eurofer from corrosion attack even at exposure times of 12,000 h. Determined radial corrosion rates lay between 10 and 20 μm/a. First results for ECX coated samples (2000 h) revealed more homogeneous corrosion behavior of the barrier layer itself compared to ECA.

Vapor Corrosion Response of Low Carbon Steel Exposed to Simulated High Level Radioactive Waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiersma, B

2006-01-26

A program to resolve the issues associated with potential vapor space corrosion and liquid/air interface corrosion in the Type III high level waste tanks is in place. The objective of the program is to develop understanding of vapor space (VSC) and liquid/air interface (LAIC) corrosion to ensure a defensible technical basis to provide accurate corrosion evaluations with regard to vapor space and liquid/air interface corrosion. The results of the FY05 experiments are presented here. The experiments are an extension of the previous research on the corrosion of tank steel exposed to simple solutions to corrosion of the steel when exposedmore » to complex high level waste simulants. The testing suggested that decanting and the consequent residual species on the tank wall is the predominant source of surface chemistry on the tank wall. The laboratory testing has shown that at the boundary conditions of the chemistry control program for solutions greater than 1M NaNO{sub 3}{sup -}. Minor and isolated pitting is possible within crevices in the vapor space of the tanks that contain stagnant dilute solution for an extended period of time, specifically when residues are left on the tank wall during decanting. Liquid/air interfacial corrosion is possible in dilute stagnant solutions, particularly with high concentrations of chloride. The experimental results indicate that Tank 50 would be most susceptible to the potential for liquid/air interfacial corrosion or vapor space corrosion, with Tank 49 and 41 following, since these tanks are nearest to the chemistry control boundary conditions. The testing continues to show that the combination of well-inhibited solutions and mill-scale sufficiently protect against pitting in the Type III tanks.« less

Multifunctional, supramolecular, continuous artificial nacre fibres

NASA Astrophysics Data System (ADS)

Hu, Xiaozhen; Xu, Zhen; Gao, Chao

2012-10-01

Nature has created amazing materials during the process of evolution, inspiring scientists to studiously mimic them. Nacre is of particular interest, and it has been studied for more than half-century for its strong, stiff, and tough attributes resulting from the recognized ``brick-and-mortar'' (B&M) layered structure comprised of inorganic aragonite platelets and biomacromolecules. The past two decades have witnessed great advances in nacre-mimetic composites, but they are solely limited in films with finite size (centimetre-scale). To realize the adream target of continuous nacre-mimics with perfect structures is still a great challenge unresolved. Here, we present a simple and scalable strategy to produce bio-mimic continuous fibres with B&M structures of alternating graphene sheets and hyperbranched polyglycerol (HPG) binders via wet-spinning assembly technology. The resulting macroscopic supramolecular fibres exhibit excellent mechanical properties comparable or even superior to nacre and bone, and possess fine electrical conductivity and outstanding corrosion-resistance.

Surface modification techniques for increased corrosion tolerance of zirconium fuel cladding

NASA Astrophysics Data System (ADS)

Carr, James Patrick, IV

Corrosion is a major issue in applications involving materials in normal and severe environments, especially when it involves corrosive fluids, high temperatures, and radiation. Left unaddressed, corrosion can lead to catastrophic failures, resulting in economic and environmental liabilities. In nuclear applications, where metals and alloys, such as steel and zirconium, are extensively employed inside and outside of the nuclear reactor, corrosion accelerated by high temperatures, neutron radiation, and corrosive atmospheres, corrosion becomes even more concerning. The objectives of this research are to study and develop surface modification techniques to protect zirconium cladding by the incorporation of a specific barrier coating, and to understand the issues related to the compatibility of the coatings examined in this work. The final goal of this study is to recommend a coating and process that can be scaled-up for the consideration of manufacturing and economic limits. This dissertation study builds on previous accident tolerant fuel cladding research, but is unique in that advanced corrosion methods are tested and considerations for implementation by industry are practiced and discussed. This work will introduce unique studies involving the materials and methods for accident tolerant fuel cladding research by developing, demonstrating, and considering materials and processes for modifying the surface of zircaloy fuel cladding. This innovative research suggests that improvements in the technique to modify the surface of zirconium fuel cladding are likely. Three elements selected for the investigation of their compatibility on zircaloy fuel cladding are aluminum, silicon, and chromium. These materials are also currently being investigated at other labs as alternate alloys and coatings for accident tolerant fuel cladding. This dissertation also investigates the compatibility of these three elements as surface modifiers, by comparing their microstructural and mechanical properties. To test their application for use in corrosive atmospheres, the corrosion behaviors are also compared in steam, water, and boric-acid environments. Various methods of surface modification were attempted in this investigation, including dip coating, diffusion bonding, casting, sputtering, and evaporation. The benefits and drawbacks of each method are discussed with respect to manufacturing and economic limits. Characterization techniques utilized in this work include optical microscopy, scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction, nanoindentation, adhesion testing, and atomic force microscopy. The composition, microstructure, hardness, modulus, and coating adhesion were studied to provide encompassing properties to determine suitable comparisons and to choose an ideal method to scale to industrial applications. The experiments, results, and detailed discussions are presented in the following chapters of this dissertation research.

Demonstration and Validation of Corrosion-Mitigation Technologies for Mechanical Room Utility Piping and Cooling-Tower Pumps

DTIC Science & Technology

2015-05-01

Infrastructure, Task 2.1” ERDC/CERL TR-15-5 ii Abstract Two critical infrastructure corrosion issues at Fort Bragg, NC, are the cor- rosion of steel utility...piping union joints in mechanical rooms and the cor- rosion of steel pump housings in cooling tower systems. Reliable operation of these components...pump 5 incorporating 316 stainless steel housing. .................................... 19 Figure 13. New pump 5 being installed

Aerospace Non Chrome Corrosion Inhibiting Primer Systems

DTIC Science & Technology

2009-09-01

Meet all HSE specifications, TSCA, REACh, Akzo • Strippable • No weight increase over current system • Meet specification requirements for corrosion, not...Positive and negative controls • Primer only and topcoated samples Aerospace Coatings | Title 9 OEM CF Optimization/ Down Selects •Usual issues...found to be true • Good NSS ≠ Good filiform ≠ Good cure ≠ Good application properties • Down select process is to minimize ≠ and move to a balance of

Naval Structural Materials: Requirements, Issues, and Opportunities.

DTIC Science & Technology

1981-04-10

because of the alloy’s relatively good corrosion resistance at high strength levels. The data 0 of Fig. 5 show the effects of electrochemical potential...STRENGTH,a-y (ksi) Fig. 5 Stress corrosion cracking data for high strength stainless steel (17-4PH) of different yield strengths under four electrochemical ... behavior . In contrast to the previously discussed results for low-carbon steel , heat treatment has only a small effect on the fatigue behavior of either

Apparatus For Measuring The Concentration Of A Species At A Distance

DOEpatents

Rice, Steven F.; Allendorf, Mark D.

2006-04-11

Corrosion of refractory silica brick and air quality issues due to particulate emissions are two important glass manufacturing issues that have been tied to sodium vapor and its transport throughout the melt tank. Knowledge of the relationship between tank operating conditions and tank atmosphere sodium levels are therefore important considerations in correcting corrosion and air quality issues. However, until recently direct quantitative measurements of sodium levels has been limited to extractive sampling methods followed by laboratory analysis. Excimer laser induced fragmentation (ELIF) fluorescence spectroscopy is a technique that permits the measurement of volatilized NaOH in high temperature environments on a timescale of less than one second. The development of this method and the construction of field-portable instrumentation for glass furnace applications are herein disclosed. The method is shown to be effective in full-scale industrial settings. Characteristics of the method are outlined, including equipment configuration, detection sensitivity, and calibration methodology.

Cardiometabolic risk in polycystic ovary syndrome.

PubMed

Bajuk Studen, Katica; Pfeifer, Marija

2018-05-29

Polycystic ovary syndrome (PCOS) is a common disorder in women of reproductive age. Besides hyperandrogenism, oligomenorrhea and fertility issues, it is associated with a high prevalence of metabolic disorders and cardiovascular risk factors. Several genetic polymorphisms have been identified for possible associations with cardiometabolic derangements in PCOS. Different PCOS phenotypes differ significantly in their cardiometabolic risk which is worsening with severity of androgen excess. Due to methodological difficulties longer time-scale data about cardiovascular morbidity and mortality in PCOS and about possible beneficial effects of different treatment interventions is missing leaving many issues regarding cardiovascular risk unresolved.

Anticorrosive Influence of Acetobacter aceti Biofilms on Carbon Steel

NASA Astrophysics Data System (ADS)

France, Danielle Cook

2016-09-01

Microbiologically influenced corrosion (MIC) of carbon steel infrastructure is an emerging environmental and cost issue for the ethanol fuel industry, yet its examination lacks rigorous quantification of microbiological parameters that could reveal effective intervention strategies. To quantitatively characterize the effect of cell concentration on MIC of carbon steel, numbers of bacteria exposed to test coupons were systematically controlled to span four orders of magnitude throughout a seven-day test. The bacterium studied, Acetobacter aceti, has been found in ethanol fuel environments and can convert ethanol to the corrosive species acetic acid. A. aceti biofilms formed during the test were qualitatively evaluated with fluorescence microscopy, and steel surfaces were characterized by scanning electron microscopy. During exposure, biofilms developed more quickly, and test reactor pH decreased at a faster rate, when cell exposure was higher. Resulting corrosion rates, however, were inversely proportional to cell exposure, indicating that A. aceti biofilms are able to protect carbon steel surfaces from corrosion. This is a novel demonstration of corrosion inhibition by an acid-producing bacterium that occurs naturally in corrosive environments. Mitigation techniques for MIC that harness the power of microbial communities have the potential to be scalable, inexpensive, and green solutions to industrial problems.

Development of an Anti-Corrosion Conductive Nano Carbon Coating Layer on Metal Bipolar Plates.

PubMed

Yeo, Kiho; Kim, Juyong; Kim, Jongryoul

2018-09-01

For automotive applications of polymer electrolyte membrane fuel cells, the enhancement of the corrosion resistance of metal bipolar plates has been a critical issue with regard to the lifespan of fuel cell stacks. In this paper, we present a novel method for increasing the lifespan by means of a conductive carbon coating on bipolar plates. Conductive carbon films were plasma coated onto metal bipolar plates in a vacuum at various temperatures. As a result, 316L stainless plates with a 10-nm-thick carbon coating layer on a 20-nm-thick CrN undercoat layer showed-contact resistance of 10.71 mΩcm2@10 kgf/cm2 and a corrosion current of 0.5 μA/cm2@0.6 V. This thin coating layer with high conductivity and excellent corrosion resistance suggests a new, effective coating method for the mass production of metal bipolar plates.

Issues for storing plant-based alternative fuels in marine environments.

PubMed

Lee, Jason S; Ray, Richard I; Little, Brenda J; Duncan, Kathleen E; Aktas, Deniz F; Oldham, Athenia L; Davidova, Irene A; Suflita, Joseph M

2014-06-01

Two coastal seawaters (Key West, FL, USA and the Persian Gulf, Bahrain, representing oligotrophic and eutrophic environments, respectively) were used to evaluate potential biodegradation and corrosion problems during exposure to alternative and conventional fuels. Uncoated carbon steel was exposed at the fuel/seawater interface and polarization resistance was monitored. Under typical marine storage conditions, dioxygen in natural seawater exposed to fuel and carbon steel was reduced to <0.1parts-per-million within 2d due to consumption by corrosion reactions and aerobic microbial respiration. Sulfides, produced by anaerobic sulfate-reducing bacteria, and chlorides were co-located in corrosion products. Transient dioxygen influenced both metabolic degradation pathways and resulting metabolites. Catechols, indicative of aerobic biodegradation, persisted after 90d exposures. Detection of catechols suggested that initial exposure to dioxygen resulted in the formation of aerobic metabolites that exacerbated subsequent corrosion processes. Published by Elsevier B.V.

Thermal spray coating for corrosion under insulation (CUI) prevention

NASA Astrophysics Data System (ADS)

Fuad, Mohd Fazril Irfan Ahmad; Razak, Khalil Abdul; Alias, Nur Hashimah; Othman, Nur Hidayati; Lah, Nik Khairul Irfan Nik Ab

2017-12-01

Corrosion under insulation (CUI) is one of the predominant issues affecting process of Oil and Gas and Petrochemical industries. CUI refers to external corrosion, but it is difficult to be detected as the insulation cover masks the corrosion problem. One of the options to prevent CUI is by utilizing the protective coating systems. Thermal spray coating (TSC) is an advanced coating system and it shows promising performance in harsh environment, which could be used to prevent CUI. However, the application of TSC is not attractive due to the high initial cost. This work evaluates the potential of TSC based on corrosion performance using linear polarization resistance (LPR) method and salt spray test (SST). Prior to the evaluation, the mechanical performance of TSC was first investigated using adhesion test and bend test. Microstructure characterization of the coating was investigated using Scanning Electron Microscope (SEM). The LPR test results showed that low corrosion rate of 0.05 mm/years was obtained for TSC in compared to the bare steel especially at high temperature of 80 °C, where usually normal coating would fail. For the salt spray test, there was no sign of corrosion products especially at the center (fully coated region) was observed. From SEM images, no corrosion defects were observed after 336 hours of continuous exposure to salt fog test. This indicates that TSC protected the steel satisfactorily by acting as a barrier from a corrosive environment. In conclusion, TSC can be a possible solution to minimize the CUI in a long term. Further research should be done on corrosion performance and life cycle cost by comparing TSC with other conventional coating technology.

Comparing Pleasure and Pain: The Fundamental Mathematical Equivalence of Reward Gain and Shock Reduction under Variable Interval Schedules

ERIC Educational Resources Information Center

Mallpress, Dave E. W.; Fawcett, Tim W.; McNamara, John M.; Houston, Alasdair I.

2012-01-01

The relationship between positive and negative reinforcement and the symmetry of Thorndike's law of effect are unresolved issues in operant psychology. Here we show that, for a given pattern of responding on variable interval (VI) schedules with the same programmed rate of food rewards (positive reinforcement VI) or electric shocks (negative…

Equity for Cities in School Finance Reform: A Case for an "Equal Educational Offering" Standard in Public Education.

ERIC Educational Resources Information Center

Silard, John; And Others

In this study, focus is upon the question of the standard for educational expenditure rather than on the alternative taxing methods for securing school district funding equalization. Chapter I begins by examining the major issues vital to urban education which the "Serrano" principle leaves unresolved. Then in Chapter II, particular elements of…

Unresolved Issues and New Challenges in Teaching English to Young Learners: The Case of South Korea

ERIC Educational Resources Information Center

Garton, Sue

2014-01-01

The introduction of languages, especially English, into the primary curriculum around the world has been one of the major language-in-education policy developments in recent years. In countries where English has been compulsory for a number of years, the question arises as to what extent the numerous and well-documented challenges faced by the…

Balancing Communities, Cultures, and Conflict: Lessons Learned From the East Ramapo School District Legal Battle

ERIC Educational Resources Information Center

Ober, Patrick; Decker, Janet R.

2016-01-01

This case illustrates why future school leaders must be prepared to handle complex legal and political issues that commonly arise in school districts today. We discuss a long-standing and unresolved legal battle between a Hasidic Jewish community and the public school district in East Ramapo, New York. In particular, we examine the difficulties…

Magnetohydrodynamic turbulence in the solar wind

NASA Technical Reports Server (NTRS)

Matthaeus, W. H.; Goldstein, M. L.

1983-01-01

Recent work in describing the solar wind as an MHD turbulent fluid has shown that the magnetic fluctuations are adequately described as time stationary and to some extent as spatially homogeneous. Spectra of the three rugged invariants of incompressible MHD are the principal quantities used to characterize the velocity and magnetic field fluctuations. Unresolved issues concerning the existence of actively developing turbulence are discussed.

The Oedipus Complex as Observed in Work with Couples and Their Children

ERIC Educational Resources Information Center

Miller, Lisa

2004-01-01

In work with couples where there is a child referred to a Child and Adolescent Mental Health Service, there are opportunities to observe and to work with unresolved Oedipal issues brought by the parents to the task of creating a family. These conflicts can be seen enacted by the child or children, either internally or externally. Examples are…

Teaching Mathematical Problem-Solving with the Brain in Mind: How Can Opening a Closed Problem Help?

ERIC Educational Resources Information Center

Ambrus, András

2014-01-01

In the international literature, increasing numbers of articles and books are published about teaching and learning, with the brain in mind. For a long time, I have been sceptical about this question. However, seeing many unresolved issues in the teaching and learning of mathematics, I slowly started to study the relevant literature and have…

Department of the Army Cost Analysis Manual

DTIC Science & Technology

2001-05-01

SECTION I - AUTOMATED COST ESTIMATING INTEGRATED TOOLS ( ACEIT ) ................................................................179 SECTION II - AUTOMATED...Management & Comptroller) endorsed the Automated Cost Estimating Integrated Tools ( ACEIT ) model and since it is widely used to prepare POEs, CCAs and...CRB IPT (in ACEIT ) will be the basis for information contained in the CAB. Any remaining unresolved issues from the IPT process will be raised at the

Canadian Policy--First Nation Involvement in the Funding and the Politics of Post-Secondary Education: How Much Is Enough?

ERIC Educational Resources Information Center

Lanceley, Darlene

For Canada Natives, the unresolved issue of postsecondary education as a treaty right is at the center of discord in relation to budget constraints. The government's fiduciary responsibilities have devolved to First Nations administration, which allows for greater tribal control over the economics of individual First Nations and jurisdiction for…

An Overview of School Dropout in Central America: Unresolved Issues and New Challenges for Education Progress

ERIC Educational Resources Information Center

Adelman, Melissa A.; Székely, Miguel

2017-01-01

School dropout is a growing concern in Central America, and in Latin America as a whole, because of its consequences for economic productivity, the inclusiveness of growth, social cohesion, and increasing youth risks. This paper utilizes more than two decades of household survey data to construct a systematic overview of school dropout at the…

Eating disorders in adolescence: attachment issues from a developmental perspective

PubMed Central

Gander, Manuela; Sevecke, Kathrin; Buchheim, Anna

2015-01-01

In the present article we review findings from an emerging body of research on attachment issues in adolescents with eating disorders from a developmental perspective. Articles for inclusion in this review were identified from PsychINFO (1966–2013), Sciencedirect (1970–2013), Psychindex (1980–2013), and Pubmed (1980–2013). First, we will outline the crucial developmental changes in the attachment system and discuss how they might be related to the early onset of the disease. Then we will report on the major results from attachment studies using self-report and narrative instruments in that age group. Studies with a developmental approach on attachment will be analyzed in more detail. The high incidence of the unresolved attachment pattern in eating disorder samples is striking, especially for patients with anorexia nervosa. Interestingly, this predominance of the unresolved category was also found in their mothers. To date, these transgenerational aspects are still poorly understood and therefore represent an exciting research frontier. Future studies that include larger adolescent samples and provide a more detailed description including symptom severity and comorbidity would contribute to a better understanding of this complex and painful condition. PMID:26321974

Thyrotropin receptor mutations and thyroid hyperfunctioning adenomas ten years after their first discovery: unresolved questions.

PubMed

Arturi, F; Scarpelli, D; Coco, A; Sacco, R; Bruno, R; Filetti, S; Russo, D

2003-04-01

Ten years after the first description of activating mutations in the thyroid stimulating hormone receptor (TSHR) gene in sporadic autonomous hyperfunctioning thyroid adenomas, there is general agreement in assigning a major pathogenic role of this genetic abnormality, acting via the constitutive activation of the cAMP pathway, in both the growth and functional characteristic of these tumours. From the beginning, however, the pathophysiological and clinical relevance of somatic TSHR mutations has been debated and some arguments still exist against a fully causative role of these mutations and the practical value of detecting these mutations for the diagnosis, treatment and prognosis of thyroid hot nodules. Some major issues will be examined herein, including (a) the frequency of TSHR alterations in various reports showing that the genetic abnormality underlying the pathogenesis of a substantial subset of thyroid tumours has yet to be identified; (b) the limitations of the present experimental models, which suggest greater caution in the interpretation of in vitro results; (c) the still unresolved question of absence of genotype-phenotype correlation. Clarification of these issues may hopefully provide new and useful tools for improving the clinical management of this disease.

The infant incubator in the neonatal intensive care unit: unresolved issues and future developments.

PubMed

Antonucci, Roberto; Porcella, Annalisa; Fanos, Vassilios

2009-01-01

Since the 19th century, devices termed incubators were developed to maintain thermal stability in low birth weight (LBW) and sick newborns, thus improving their chances of survival. Remarkable progress has been made in the production of infant incubators, which are currently highly technological devices. However, they still need to be improved in many aspects. Regarding the temperature and humidity control, future incubators should minimize heat loss from the neonate and eddies around him/her. An unresolved issue is exposure to high noise levels in the Neonatal Intensive Care Unit (NICU). Strategies aimed at modifying the behavior of NICU personnel, along with structural improvements in incubator design, are required to reduce noise exposure. Light environment should be taken into consideration in designing new models of incubators. In fact, ambient NICU illumination may cause visual pathway sequelae or possibly retinopathy of prematurity (ROP), while premature exposure to continuous lighting may adversely affect the rest-activity patterns of the newborn. Accordingly, both the use of incubator covers and circadian lighting in the NICU might attenuate these effects. The impact of electromagnetic fields (EMFs) on infant health is still unclear. However, future incubators should be designed to minimize the EMF exposure of the newborn.

Vitamin D supplementation for osteoporosis in older adults: can we make it help better?

PubMed

Dong, C-H; Gao, Q-M; Wang, Z-M; Wang, A-M; Zhen, P

2016-11-01

With the increase of the average age of our population, the incidence of diseases specific for older adults has been increasing. One of such diseases is osteoporosis. The true incidence of osteoporosis is unknown. But the estimates indicate that this disease affects wide proportions of the population, ranging in millions or even ten millions in large countries like the United States. As this poses a significant burden on the health care system, interventions that could prevent or treat this condition are in the focus of clinical research. Vitamin D, the determinant of bone health, has been tested in clinical studies as the agent to treat osteoporosis. Despite the progress, there is still some controversy about the targeted blood levels of vitamin D, most efficient way to supplement this vitamin, and clinical efficacy of this supplementation in the elderly.In the present review, we will highlight the metabolism of vitamin D and the aforementioned unresolved issues, as well as review the recent interventional studies on vitamin D supplementation. In the present review, we will highlight the metabolism of vitamin D and the aforementioned unresolved issues, as well as review the recent interventional studies on vitamin D supplementation.

Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance.

PubMed

Salahshoor, Meisam; Guo, Yuebin

2012-01-09

Magnesium-Calcium (Mg-Ca) alloy has received considerable attention as an emerging biodegradable implant material in orthopedic fixation applications. The biodegradable Mg-Ca alloys avoid stress shielding and secondary surgery inherent with permanent metallic implant materials. They also provide sufficient mechanical strength in load carrying applications as opposed to biopolymers. However, the key issue facing a biodegradable Mg-Ca implant is the fast corrosion in the human body environment. The ability to adjust degradation rate of Mg-Ca alloys is critical for the successful development of biodegradable orthopedic implants. This paper focuses on the functions and requirements of bone implants and critical issues of current implant biomaterials. Microstructures and mechanical properties of Mg-Ca alloys, and the unique properties of novel magnesium-calcium implant materials have been reviewed. Various manufacturing techniques to process Mg-Ca based alloys have been analyzed regarding their impacts on implant performance. Corrosion performance of Mg-Ca alloys processed by different manufacturing techniques was compared. In addition, the societal and economical impacts of developing biodegradable orthopedic implants have been emphasized.

Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance

PubMed Central

Salahshoor, Meisam; Guo, Yuebin

2012-01-01

Magnesium-Calcium (Mg-Ca) alloy has received considerable attention as an emerging biodegradable implant material in orthopedic fixation applications. The biodegradable Mg-Ca alloys avoid stress shielding and secondary surgery inherent with permanent metallic implant materials. They also provide sufficient mechanical strength in load carrying applications as opposed to biopolymers. However, the key issue facing a biodegradable Mg-Ca implant is the fast corrosion in the human body environment. The ability to adjust degradation rate of Mg-Ca alloys is critical for the successful development of biodegradable orthopedic implants. This paper focuses on the functions and requirements of bone implants and critical issues of current implant biomaterials. Microstructures and mechanical properties of Mg-Ca alloys, and the unique properties of novel magnesium-calcium implant materials have been reviewed. Various manufacturing techniques to process Mg-Ca based alloys have been analyzed regarding their impacts on implant performance. Corrosion performance of Mg-Ca alloys processed by different manufacturing techniques was compared. In addition, the societal and economical impacts of developing biodegradable orthopedic implants have been emphasized. PMID:28817036

Worldwide Emerging Environmental Issues Affecting the U.S. Military

DTIC Science & Technology

2010-06-30

the Arctic Ocean will be corrosively acidic by 2018 , 50% will reach that condition by 2050, and the whole ocean will be acidic by the end of the...Ocean will be corrosively acidic by 2018 ; 50% by 2050; and entirely by the end of the century. [October 2009. Military Implications, Sources157] By... taxation is a matter of national sovereignty and any change requires unanimity among the 27 member states. To further reduce emissions from

Worldwide Emerging Environmental Issues Affecting the U.S. Military. October 2009

DTIC Science & Technology

2009-10-01

nuclear arms. Deliberations will take at least until May 2010. Belgium has already banned cluster and depleted uranium munitions. [Related item: UN...dissolve in cold water than warm. Research carried out in the archipelago of Svalbard revealed that seawater could reach corrosive levels within 10 years... corrosively acidic by 2018; 50% by 2050; and entirely by the end of the century. 6.8.2 Food and Water Security The number of hungry people in the

Corrosion and wear properties of laser surface modified NiTi with Mo and ZrO 2

NASA Astrophysics Data System (ADS)

Ng, K. W.; Man, H. C.; Yue, T. M.

2008-08-01

Because of its biocompatibility, superelasticity and shape memory characteristics, NiTi alloys have been gaining immense interest in the medical field. However, there is still concern on the corrosion resistance of this alloy if it is going to be implanted in the human body for a long time. Titanium is not toxic but nickel is carcinogenic and is implicated in various reactions including allergic response and degeneration of muscle tissue. Debris from wear and the subsequent release of Ni + ions due to corrosion in the body system are fatal issues for long-term application of this alloy in the human body. This paper reports the corrosion and wear properties of laser surface modified NiTi using Mo and ZrO 2 as surface alloying elements, respectively. The modified layers which are free from microcracks and porosity, act as both physical barrier to nickel release and enhance the bulk properties, such as hardness, wear resistance, and corrosion resistance. The electrochemical performance of the surface modified alloy was studied in Hanks' solution. Electrochemical impedance spectroscopy was measured.

Problems, pitfalls and probes: Welcome to the jungle of electrochemical noise technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edgemon, G.L.

1998-02-19

The rise in electrochemical noise (EN) as a corrosion monitoring technique has resulted in unique problems associated with the field application of this method. Many issues relate to the design of the EN probe electrodes. The ability of an electrochemical noise monitoring system to identify and discriminate between localized corrosion mechanisms is related primarily to the capability of the probe to separate the corrosion cell anode from the corresponding cathode. Effectiveness of this separation is largely determined by the details of and the proper design of the probe that is in the environment of interest. No single probe design ormore » geometry can be effectively use in every situation to monitor all types of corrosion. In this paper the authors focus on a case study and probe development history related to monitoring corrosion in an extremely hostile environment using EN. While the ultimate application of EN was and continues to be successful, the case study shows that patience and persistence was necessary to meet and properly implement the monitoring program. Other possible source of problems and frustration with implementing EN are also discussed.« less

Detection of active corrosion in reinforced and prestressed concrete: overview of NIST TIP project

NASA Astrophysics Data System (ADS)

Gonzalez-Nunez, M. A.; Nanni, A.; Matta, F.; Ziehl, P.

2011-04-01

The US transportation infrastructure has been receiving intensive public and private attention in recent years. The Federal Highway Administration estimates that 42 percent of the nearly 600,000 bridges in the Unites States are in need of structural or functional rehabilitation1. Corrosion of reinforcement steel is the main durability issue for reinforced and prestressed concrete structures, especially in coastal areas and in regions where de-icing salts are regularly used. Acoustic Emission (AE) has proved to be a promising method for detecting corrosion in steel reinforced and prestressed concrete members. This type of non-destructive test method primarily measures the magnitude of energy released within a material when physically strained. The expansive ferrous byproducts resulting from corrosion induce pressure at the steel-concrete interface, producing longitudinal and radial microcracks that can be detected by AE sensors. In the experimental study presented herein, concrete block specimens with embedded steel reinforcing bars and strands were tested under accelerated corrosion to relate the AE activity with the onset and propagation stages of corrosion. AE data along with half cell potential measurements and galvanic current were recorded to examine the deterioration process. Finally, the steel strands and bars were removed from the specimens, cleaned and weighed. The results were compared vis-à-vis Faraday's law to correlate AE measurements with degree of corrosion in each block.

Space station human productivity study. Volume 5: Management plans

NASA Technical Reports Server (NTRS)

1985-01-01

The 67 Management Plans represent recommended study approaches for resolving 108 of the 305 Issues which were identified. Each study Management Plan is prepared in three formats: Management Plan Overview (lists the subsumed Issues, study background, and related overview information); Study Plan (details the study approach by tasks, lists special needs, and describes expected study products); Schedule-Task Flow (provides a time-lined schedule for the study tasks and resource requirements). The Management Relationships Matrix, included in this volume, shows the data input-output relationships among all recommended studies. A listing is also included which cross-references the unresolved requirements to Issues to management plans. A glossary of all abbreviations utilized is provided.

Proceedings of the International Congress (12th), Corrosion Control for Low-Cost Reliability, Held in Houston, Texas on September 19 -24, 1993. Volume 3B. Corrosion: Specific Issues

DTIC Science & Technology

1993-09-24

on the MO calculations, polarised u.v. absorption spectra, solvent shifts, intensities and behaviour on protonation. 1746 EVALUATION OF ANTICORROSIVE ... method calculates the absorption and scattering effects of each element present in a sample from the fluorescent intensities measured. Standards are...for the use of the methods and materials discussed herein. Any goods, products, andlor services mentioned are mentioned as items of information only

Preceedings of the International Congress (12th), Corrosion Control for Low-Cost Reliability, Held in Houston, Texas on September 19 -24, 1993. Volume 5A. Corrosion: Specific Issues

DTIC Science & Technology

1993-09-24

residual dissolved matter and fine (ɘ.05 jiLm) particle contamination in the water ranged from 2 x 10-9 to 8 x 10-8 g/cm 3 , as determined with a TOC (total...Publication 511-I, Washington, D.C., 1978. 5. ICOI-SCM, "Envelhecimento do Sistema El tr i-:o, estudo interno do Sub-Comitt de Manutenyao do Grupo Coordenador

Stress Corrosion Cracking Issues in Light Metals for Automotive Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Russell H.; Danielson, Michael J.; Baer, Donald R.

The Partnership for New Generation Vehicle has the goal of producing lightweight automobiles that achieve 80 mpg. To accomplish this will require liberal use of Al and Mg alloys such as AA5083 and AZ91D. The corrosion and stress corrosion of alloy AA5083 is controlled by the precipitation of the b-phase (Al3Mg2) at grain boundaries and by the precipitation of the g-phase (Mg17Al12) in AZ91D. The b-phase is anodic to the Al matrix while the g-phase is cathodic to the Mg matrix. The effects of crack propagation along grain boundaries with electrochemically active particles is a key factor in the SCCmore » performance of these materials.« less

Effect of Localized Corrosion on Fatigue-Crack Growth in 2524-T3 and 2198-T851 Aluminum Alloys Used as Aircraft Materials

NASA Astrophysics Data System (ADS)

Moreto, J. A.; Broday, E. E.; Rossino, L. S.; Fernandes, J. C. S.; Bose Filho, W. W.

2018-03-01

Corrosion and fatigue of aluminum alloys are major issues for the in-service life assessment of aircraft structures and for the management of aging air fleets. The aim of this work was to evaluate the effect of localized corrosion on fatigue crack growth (FCG) resistance of the AA2198-T851 Al-Li alloy (Solution Heat Treated, Cold Worked, and Artificially Aged), comparing it with the FCG resistance of AA2524-T3 (Solution Heat Treated and Cold Worked), considering the effect of seawater fog environment. Before fatigue tests, the corrosion behavior of 2198-T851 and 2524-T3 aluminum alloys was verified using open circuit potential and potentiodynamic polarization techniques. Fatigue in air and corrosion fatigue tests were performed applying a stress ratio (R) of 0.1, 15 Hz (air) and 0.1 Hz (seawater fog) frequencies, using a sinusoidal waveform in all cases. The results showed that the localized characteristics of the 2198-T851 and 2524-T3 aluminum alloys are essentially related to the existence of intermetallic compounds, which, due to their different nature, may be cathodic or anodic in relation to the aluminum matrix. The corrosive medium has affected the FCG rate of both aluminum alloys, in a quite similar way.

Prospective Assessment of Neurocognition in Future Gulf-deployed and Gulf-nondeployed Military Personnel: A Pilot Study

DTIC Science & Technology

2007-02-01

increased emotional distress but with advantaged simple reactiontime. Unit cohesion buffers the adverse effects of early life events on PTSD prior to...motor speed), and emotional (e.g., mood) behaviors thought to reflect neural integrity. Unresolved issues include whether subjective...including neurobehavioral and emotional functioning, (b) examine the impact of deployment-related stress and environmental exposures on

Implicit Learning in the Crowd: Investigating the Role of Awareness in the Acquisition of L2 Knowledge

ERIC Educational Resources Information Center

Kerz, Elma; Wiechmann, Daniel; Riedel, Florian B.

2017-01-01

A growing field of research has made use of a semiartificial language paradigm to investigate the role of awareness in L2 acquisition. A central and empirically still unresolved issue in this field concerns the possibility of learning implicitly, that is, without intention to learn and without awareness of what has been learned. Up until now,…

Exercise Ventilatory Limitation: The Role Of Expiratory Flow Limitation

PubMed Central

Babb, Tony G.

2012-01-01

Ventilatory limitation to exercise remains an important unresolved clinical issue; as a result, many individuals misinterpret the effects of expiratory flow limitation as an all-or-nothing phenomenon. Expiratory flow limitation is not all-or-none; approaching maximal expiratory flow can have important effects not only on ventilatory capacity but also on breathing mechanics, ventilatory control, and possibly exertional dyspnea and exercise intolerance. PMID:23038244

The Effectiveness of Instructor Personalized and Formative Feedback Provided by Instructor in an Online Setting: Some Unresolved Issues

ERIC Educational Resources Information Center

Planar, Dolors; Moya, Soledad

2016-01-01

Formative feedback has great potential for teaching and learning in online undergraduate programmes. There is a large number of courses where the main source of feedback is provided by the instructor. This is particularly seen in subjects where assessments are designed based on specific activities which are the same for all students, and where the…

Diabetic Cardiomyopathy: Bench to Bedside

PubMed Central

Schilling, Joel D.; Mann, Douglas L.

2012-01-01

The study of diabetic cardiomyopathy (diabetic CM) is an area of significant interest given the strong association between diabetes and the risk of heart failure. Many unanswered questions remain regarding the clinical definition and pathogenesis of this metabolic cardiomyopathy. This article reviews the current understanding of diabetic CM with a particular emphasis on the unresolved issues that have limited translation of scientific discovery to patient bedside. PMID:22999244

Mean Length of Utterance in Children with Specific Language Impairment and in Younger Control Children Shows Concurrent Validity and Stable and Parallel Growth Trajectories

ERIC Educational Resources Information Center

Rice, Mabel L.; Redmond, Sean M.; Hoffman, Lesa

2006-01-01

Purpose: Although mean length of utterance (MLU) is a useful benchmark in studies of children with specific language impairment (SLI), some empirical and interpretive issues are unresolved. The authors report on 2 studies examining, respectively, the concurrent validity and temporal stability of MLU equivalency between children with SLI and…

Teacher Collaboration Praxis: Conflicts, Borders, and Ideologies from a Micropolitical Perspective (La práctica colaborativa entre docentes: conflictos, fronteras e ideologías desde una perspectiva micropolítica)

ERIC Educational Resources Information Center

Keranen, Nancy; Encinas Prudencio, Fátima

2014-01-01

This paper looks at a feature of teacher collaboration within Achinstein's (2002) micropolitics of collaboration but from an intrapersonal perspective. Results discussed feature issues of conflict, borders, and ideologies within each participating teacher rather than between teachers. Unresolved or unacknowledged intrapersonal conflict might lead…

Character Building or Subversive Consequences of Employment during High School: Causal Effects Based on Propensity Score Models for Categorical Treatments

ERIC Educational Resources Information Center

Nagengast, Benjamin; Marsh, Herbert W.; Chiorri, Carlo; Hau, Kit-Tai

2014-01-01

The present study revisited the unresolved issue of the long-term effects of part-time working intensity during high school on students' achievement, participation in postsecondary education, time allocation, and work-related values and expectations. Using data from the Educational Longitudinal Study of 2002 (N = 14,654), the effects of part-time…

Weathering effects on tensile and stress rupture strength of glass fiber reinforced vinylester and epoxy thermoset pipes

NASA Astrophysics Data System (ADS)

Nizamuddin, Syed

Glass fiber reinforced vinylester (GFRE) and epoxy (GFRE) pipes have been used for more than three decades to mitigate corrosion problems in oil fields, chemical and industrial plants. In these services, both GFRV and GFRE pipes are exposed to various environmental conditions. Long-term mechanical durability of these pipes after exposure to environmental conditions, which include natural weathering exposure to seasonal temperature variation, sea water, humidity and other corrosive fluids like crude oil, should be well known. Although extensive research has been undertaken, several major issues pertaining to the performance of these pipes under a number of environmental conditions still remain unresolved. The main objective of this study is to investigate the effects of natural weathering, combined natural weathering with seawater and crude oil exposure, for time periods ranging from 3 to 36 months respectively, on the tensile and stress rupture behavior of GFRV and GFRE pipes. Ring specimens are machined from GFRV and GFRE pipes and tested before and after exposure to different weathering conditions prevalent in the eastern region (Dhahran) of Saudi Arabia and present under service conditions. The natural weathering and combined natural weathering with crude oil exposure of GFRV specimens revealed increased tensile strength even after 36 months of exposure when compared with that of the as received samples. However, the combined natural weathering with seawater exposure of GFRV samples revealed better tensile behavior till 24 months of exposure, and after 36 months their tensile strength was seen to be below that of the as received GFRV samples. The stress rupture behavior of natural weather exposed GFRV samples showed an improvement after 12 months of exposure and it decreased after 24 and 36 months of exposure when compared with the as received GFRV samples. The combined natural weathering with crude oil and seawater exposure of GFRV sample revealed improved stress rupture behavior after 12 months of exposure. The as received GFRE pipe specimens revealed higher average tensile strength when compared to the as received GFRV sample, whereas the stress rupture behavior was comparatively low. The seawater exposure of the GFRE specimens resulted in drastic reduction in both tensile and stress rupture properties. Fractographic analysis was performed using an optical microscope and SEM in order to explain the possible controlling mechanisms of failure.

Heart Failure: From Research to Clinical Practice.

PubMed

Islam, Md Shahidul

2018-01-01

"Heart failure: from research to clinical practice", a collection of selected reviews, which comes out also as a book, covers essentially all important aspects of heart failure, including the pathogenesis, clinical features, biomarkers, imaging techniques, medical treatment and surgical treatments, use of pacemakers and implantable cardioverter defibrillators, and palliative care. The reviews include essential background information, state of the art, critical and in-depth analysis, and directions for future researches for elucidation of the unresolved issues. Everyone interested in heart failure is expected to find this compilation helpful for a deeper understanding of some of the complex issues.

Characterization and management of electrical noise in the new Australian military HF communication network

NASA Astrophysics Data System (ADS)

Vyden, Bruce

2000-03-01

The Australian Defense Force's (ADF's) High Frequency (HF) communication network is soon to be replaced by a modernized system. Characterization of electrical noise at the receiver sites proposed for the new system is crucial to its performance. Consequently receiver site noise will be measured under the HF Modernization implementation contract that was awarded to Boeing Australia Ltd. Unfortunately the utility of the noise measurements is constrained by the uncertainties of both the ionosphere and atmosphere. This paper discusses some of the issues related to the methodology for measuring the noise and exposes some unresolved issues.

Pilot workload and fatigue: A critical survey of concepts and assessment techniques

NASA Technical Reports Server (NTRS)

Gartner, W. B.; Murphy, M. R.

1976-01-01

The principal unresolved issues in conceptualizing and measuring pilot workload and fatigue are discussed. These issues are seen as limiting the development of more useful working concepts and techniques and their application to systems engineering and management activities. A conceptual analysis of pilot workload and fatigue, an overview and critique of approaches to the assessment of these phenomena, and a discussion of current trends in the management of unwanted workload and fatigue effects are presented. Refinements and innovations in assessment methods are recommended for enhancing the practical significance of workload and fatigue studies.

Fundamental issues in the geology and geophysics of venus.

PubMed

Solomon, S C; Head, J W

1991-04-12

A number of important and currently unresolved issues in the global geology and geophysics of Venus will be addressable with the radar imaging, altimetry, and gravity measurements now forthcoming from the Magellan mission. Among these are the global volcanic flux and the rate of formation of new crust; the global heat flux and its regional variations; the relative importance of localized hot spots and linear centers of crustal spreading to crustal formation and tectonics; and the planform of mantle convection on Venus and the nature of the interactions among interior convective flow, near-surface deformation and magmatism.

Investigations on the corrosion resistance of metallic bipolar plates (BPP) in proton exchange membrane fuel cells (PEMFC) - understanding the effects of material, coating and manufacturing

NASA Astrophysics Data System (ADS)

Dur, Ender

Polymer Electrolyte Membrane Fuel Cell (PEMFC) systems are promising technology for contributing to meet the deficiency of world`s clean and sustainable energy requirements in the near future. Metallic bipolar plate (BPP) as one of the most significant components of PEMFC device accounts for the largest part of the fuel cell`s stack. Corrosion for metallic bipolar plates is a critical issue, which influences the performance and durability of PEMFC. Corrosion causes adverse impacts on the PEMFC`s performance jeopardizing commercialization. This research is aimed at determining the corrosion resistance of metallic BPPs, particularly stainless steels, used in PEMFC from different aspects. Material selection, coating selection, manufacturing process development and cost considerations need to be addressed in terms of the corrosion behavior to justify the use of stainless steels as a BPP material in PEMFC and to make them commercially feasible in industrial applications. In this study, Ti, Ni, SS304, SS316L, and SS 430 blanks, and BPPs comprised of SS304 and SS316L were examined in terms of the corrosion behavior. SS316L plates were coated to investigate the effect of coatings on the corrosion resistance performance. Stamping and hydroforming as manufacturing processes, and three different coatings (TiN, CrN, ZrN) applied via the Physical Vapor Deposition (PVD) method in three different thicknesses were selected to observe the effects of manufacturing processes, coating types and coating thicknesses on the corrosion resistance of BPP, respectively. Uncoated-coated blank and formed BPP were subjected to two different corrosion tests: potentiostatic and potentiodynamic. Some of the substantial results: 1- Manufacturing processes have an adverse impact on the corrosion resistance. 2- Hydroformed plates have slightly higher corrosion resistance than stamped samples. 3- BPPs with higher channel size showed better corrosion resistance. 4- Since none of the uncoated samples meet the 2015 target of the U.S. Department of Energy, surface coating is required. 5- ZrN and CrN coated BPPs exhibited higher corrosion resistance meeting DOE target while TiN coated samples had the lowest corrosion resistance. Higher coating thicknesses improved the corrosion resistance of the BPPs. 6- Process sequence between coating and manufacturing is not significant for hydroforming case (ZrN and CrN) and stamping case (CrN) in terms of the corrosion resistance. In other words, coating the BPP`s substrate material before manufacturing process does not always decrease the corrosion resistance of the BPPs.

Corrosion Behavior of Plasma-Passivated Cu

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barbour, J.C.; Braithwaite, J.W.; Son, K.A.

1999-07-09

A new approach is being pursued to study corrosion in Cu alloy systems by using combinatorial analysis combined with microscopic experimentation (the Combinatorial Microlab) to determine mechanisms for copper corrosion in air. Corrosion studies are inherently difficult because of complex interactions between materials and environment, forming a multidimensional phase space of corrosion variables. The Combinatorial Microlab was specifically developed to address the mechanism of Cu sulfidation, which is an important reliability issue for electronic components. This approach differs from convention by focusing on microscopic length scales, the relevant scale for corrosion. During accelerated aging, copper is exposed to a varietymore » of corrosive environments containing sulfidizing species that cause corrosion. A matrix experiment was done to determine independent and synergistic effects of initial Cu oxide thickness and point defect density. The CuO{sub x} was controlled by oxidizing Cu in an electron cyclotron resonance (ECR) O{sub 2} plasma, and the point defect density was modified by Cu ion irradiation. The matrix was exposed to 600 ppb H{sub 2}S in 65% relative humidity air atmosphere. This combination revealed the importance of oxide quality in passivating Cu and prevention of the sulfidizing reaction. A native oxide and a defect-laden ECR oxide both react at 20 C to form a thick Cu{sub 2}S layer after exposure to H{sub 2}S, while different thicknesses of as-grown ECR oxide stop the formation of Cu{sub 2}S. The species present in the ECR oxide will be compared to that of an air oxide, and the sulfide layer growth rate will be presented.« less

Identifying ethical issues of the Department of the Army civilian and Army Nurse Corps certified registered nurse anesthetists.

PubMed

Jenkins, Constance L; Elliott, Aaron R; Harris, Janet R

2006-08-01

The purposes of this study were to identify the ethical issues Department of the Army civilian and Army Nurse Corps certified registered nurse anesthetists (CRNAs) encountered in their anesthesia practice and how disturbed they were by these issues. This descriptive study used a secondary data analysis of a cross-sectional survey of Army Nurse Corps officers and Department of the Army civilian registered nurses (N = 5,293). The CRNA subset (n = 97) was obtained from questionnaires that indicated a primary practice setting as anesthesia. The most frequently occurring ethical issue identified was conflict in the nurse-physician relationship, whereas the most disturbing issue was working with incompetent/impaired colleagues. Unresolved ethical conflicts can negatively influence the nurses' morale, leading to avoidance of the issue and contributing to burnout. Identifying the ethical issues and disturbance level experienced by CRNAs should contribute to the development of an ethics education program that addresses issues encountered in CRNA practice.

Bonding-Compatible Corrosion Inhibitor for Rinsing Metals

NASA Technical Reports Server (NTRS)

Saunders, C. R.; Wurth, L. A.; Radar, A.

2005-01-01

A corrosion-inhibiting mixture of compounds has been developed for addition to the water used to rinse metal parts that have been cleaned with aqueous solutions in preparation for adhesive bonding of the metals to rubber and rubber-like materials. Prior to the development of this corrosion inhibitor, the parts (made, variously, of D6AC steel and 7075-T73 aluminum) were rinsed by deionized water, which caused corrosion in some places on the steel parts especially in such occluded places as sealing surfaces and threaded blind holes. An integral part of the particular cleaning process is the deposition of a thin layer of silicates and silane primers that increase the strength of the adhesive bond. The corrosion inhibitor is formulated, not only to inhibit corrosion of both D6AC steel and 7075- T73 aluminum, but also to either increase or at least not reduce the strength of the adhesive bond to be formed subsequently. The corrosion inhibitor is a mixture of sodium silicate and sodium tetraborate. The sodium silicate functions as both a corrosion inhibitor and a bond-strength promoter in association with the silane primers. The sodium tetraborate buffers the rinse solution at the optimum pH and functions as a secondary corrosion inhibitor for the steel. For a given application, the concentrations of sodium silicate and sodium tetraborate must be chosen in a compromise among the needs to inhibit corrosion of steel, inhibit corrosion of aluminum, and minimize cosmetic staining of both steel and aluminum. Concentrations of sodium silicate in excess of 150 parts of silicon per million parts of solution (ppm Si) have been determined to enhance inhibition of corrosion; unfortunately, because of the alkalinity of sodium silicate, even a small concentration can raise the pH of the rinse solution to such a level that aluminum becomes corroded despite the inhibiting effect. The pH of a solution that contains a high concentration of sodium silicate can be decreased by adding sodium tetraborate. On the other hand, the addition of sodium tetraborate increases the concentration of dissolved solids to such a high level that cosmetic staining becomes an issue.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sridharan, Kumar; Anderson, Mark

The supercritical CO{sub 2} Brayton cycle is gaining importance for power conversion in the Generation IV fast reactor system because of its high conversion efficiencies. When used in conjunction with a sodium fast reactor, the supercritical CO{sub 2} cycle offers additional safety advantages by eliminating potential sodium-water interactions that may occur in a steam cycle. In power conversion systems for Generation IV fast reactors, supercritical CO{sub 2} temperatures could be in the range of 30°C to 650°C, depending on the specific component in the system. Materials corrosion primarily at high temperatures will be an important issue. Therefore, the corrosion performancemore » limits for materials at various temperatures must be established. The proposed research will have four objectives centered on addressing corrosion issues in a high-temperature supercritical CO{sub 2} environment: Task 1: Evaluation of corrosion performance of candidate alloys in high-purity supercritical CO{sub 2}: The following alloys will be tested: Ferritic-martensitic Steels NF616 and HCM12A, austenitic alloys Incoloy 800H and 347 stainless steel, and two advanced concept alloys, AFA (alumina forming austenitic) steel and MA754. Supercritical CO{sub 2} testing will be performed at 450°C, 550°C, and 650°C at a pressure of 20 MPa, in a test facility that is already in place at the proposing university. High purity CO{sub 2} (99.9998%) will be used for these tests. Task 2: Investigation of the effects of CO, H{sub 2}O, and O{sub 2} impurities in supercritical CO{sub 2} on corrosion: Impurities that will inevitably present in the CO{sub 2} will play a critical role in dictating the extent of corrosion and corrosion mechanisms. These effects must be understood to identify the level of CO{sub 2} chemistry control needed to maintain sufficient levels of purity to manage corrosion. The individual effects of important impurities CO, H{sub 2}O, and O{sub 2} will be investigated by adding them separately to high purity CO{sub 2}. Task 3: Evaluation of surface treatments on the corrosion performance of alloys in supercritical CO{sub 2}: Surface treatments can be very beneficial in improving corrosion resistance. Shot peening and yttrium and aluminum surface treatments will be investigated. Shot peening refines the surface grain sizes and promotes protective Cr-oxide layer formation. Both yttrium and aluminum form highly stable oxide layers (Y{sub 2}O{sub 3} and Al{sub 2}O{sub 3}), which can get incorporated in the growing Fe-oxide layer to form an impervious complex oxide to enhance corrosion resistance. Task 4: Study of flow-assisted corrosion of select alloys in supercritical CO{sub 2} under a selected set of test conditions: To study the effects of flow-assisted corrosion, tests will be conducted in a supercritical CO{sub 2} flow loop. An existing facility used for supercritical water flow studies at the proposing university will be modified for use in this task. The system is capable of flow velocities up to 10 m/s and can operate at temperatures and pressures of up to 650°C and 20 MPa, respectively. All above tasks will be performed in conjunction with detailed materials characterization and analysis using scanning electron microscopy/energy dispersive spectroscopy (SEM-EDS), x-ray diffraction (XRD), Auger electron spectroscopy (AES) techniques, and weight change measurements. Inlet and outlet gas compositions will be monitored using gas chromatography-mass spectrometry (GCMS).« less

Performance of Ceramics in Severe Environments

NASA Technical Reports Server (NTRS)

Jacobson, Nathan S.; Fox, Dennis S.; Smialek, James L.; Deliacorte, Christopher; Lee, Kang N.

2005-01-01

Ceramics are generally stable to higher temperatures than most metals and alloys. Thus the development of high temperature structural ceramics has been an area of active research for many years. While the dream of a ceramic heat engine still faces many challenges, niche markets are developing for these materials at high temperatures. In these applications, ceramics are exposed not only to high temperatures but also aggressive gases and deposits. In this chapter we review the response of ceramic materials to these environments. We discuss corrosion mechanisms, the relative importance of a particular corrodent, and, where available, corrosion rates. Most of the available corrosion information is on silicon carbide (SIC) and silicon nitride (Si3N4) monolithic ceramics. These materials form a stable film of silica (SO2) in an oxidizing environment. We begin with a discussion of oxidation of these materials and proceed to the effects of other corrodents such as water vapor and salt deposits. We also discuss oxidation and corrosion of other ceramics: precurser derived ceramics, ceramic matrix composites (CMCs), ceramics which form oxide scales other than silica, and oxide ceramics. Many of the corrosion issues discussed can be mitigated with refractory oxide coatings and we discuss the current status of this active area of research. Ultimately, the concern of corrosion is loss of load bearing capability. We discuss the effects of corrosive environments on the strength of ceramics, both monolithic and composite. We conclude with a discussion of high temperature wear of ceramics, another important form of degradation at high temperatures.

Electrochemical Measurement of Atmospheric Corrosion

NASA Technical Reports Server (NTRS)

DeArmond, Anna H.; Davis, Dennis D.; Beeson, Harold D.

1999-01-01

Corrosion of Shuttle thruster components in atmospheres containing high concentrations of nitrogen tetroxide (NTO) and water is an important issue in ground operations of bipropellant systems in humid locations. Measurements of the corrosivities of NTO-containing atmospheres and the responses of different materials to these atmospheres have been accomplished using an electrochemical sensor. The sensor is composed of alternating aluminum/titanium strips separated by thin insulating layers. Under high humidity conditions a thin film of water covers the surface of the sensor. Added NTO vapor reacts with the water film to form a conductive medium and establishes a galvanic cell. The current from this cell can be integrated with respect to time and related to the corrosion activity. The surface layer formed from humid air/NTO reacts in the same way as an aqueous solution of nitric acid. Nitric acid is generally considered an important agent in NTO corrosion situations. The aluminum/titanium sensor is unresponsive to dry air, responds slightly to humid air (> 75% RH), and responds strongly to the combination of humid air and NTO. The sensor response is a power function (n = 2) of the NTO concentration. The sensor does not respond to NTO in dry air. The response of other materials in this type of sensor is related to position of the material in a galvanic series in aqueous nitric acid. The concept and operation of this electrochemical corrosion measurement is being applied to other corrosive atmospheric contaminants such as hydrogen chloride, hydrogen fluoride, sulfur dioxide, and acidic aerosols.

Corrosion behavior of pre-oxidized HR-224 superalloy in supercritical water environment at 700 °C

NASA Astrophysics Data System (ADS)

Liu, Yu-Chen; Chen, Shih-Ming; Ouyang, Fan-Yi; Kai, Ji-Jung

2018-07-01

Corrosion of cladding materials in supercritical water (SCW) environment is a key reliability issue for the safety of nuclear power plant. In this study, we propose to use the pre-oxidized treatment to provide better corrosion resistance of cladding materials in the SCW environment. The nickel-based superalloy HR-224 was first pre-oxidized in flowing air at 982 °C for 100 h to establish a continuous and dense scales and then exposed in the SCW environment with high oxygen content (8.3 ppm) at 700 °C and 24.8 MPa for cyclic oxidation testing up to 1300 h. The pre-oxidized samples exhibit better corrosion resistance than as-received samples in the SCW environment. After pre-oxidizing process, triple scales, Ni(Cr, Fe)2O4 spinel/Cr2O3/α-Al2O3 were observed, and the growth of inner α-Al2O3 layer is predominant in the SCW environment. The α-Al2O3 layer in pre-oxidized samples was found to effectively decrease outward migration of metal ions in Alloy HR-224 and thus provides better corrosion resistance than as-received samples in SCW environment.

Unresolved mourning, supernatural beliefs and dissociation: a mediation analysis.

PubMed

Thomson, Paula; Jaque, S Victoria

2014-01-01

Unresolved mourning is marked by disorganized behavior and states of mind. In this study, we speculated that pathological dissociation would mediate the effects of unresolved mourning on supernatural beliefs. This hypothesis was determined based on findings that indicate an association between higher levels of dissociation, stronger beliefs in the supernatural and unresolved mourning. We examined two groups of participants, one classified as non-unresolved (non-U) (n = 56) and the other as unresolved (n = 26) (U) with respect to past loss/trauma as measured by the Adult Attachment Interview (AAI). Two self-report instruments were administered to measure supernatural beliefs and dissociation. As hypothesized, the multivariate analysis of variance indicated mean differences between the two groups. The unresolved group had greater belief in the supernatural and more pathological dissociative processes. The mediation analysis demonstrated that pathological dissociation fully mediated the effects of unresolved mourning on supernatural beliefs.

Integrative dimensions of psychotherapy training.

PubMed

Greben, Daniel H

2004-04-01

This paper investigates the influence of integrative factors on psychotherapy education. The broad relevance of integrative psychotherapy to residency training and continuing mental health education is discussed. Following a review of the existing literature on the education of integrative psychotherapists, the article systematically examines the integrative and pedagogic issues to be considered in planning psychotherapy training informed by integrative principles. The integrative issues are organized into 5 categories: attitudinal set, knowledge base, clinical techniques and skills, developmental tasks and challenges, and systemic institutional factors. The educational issues can be divided into 4 categories: content, format and process, sequence, and faculty development. Brief descriptions of actual educational interventions illustrate the implementation of such ideas. Specific recommendations are made regarding the development of integrative educational initiatives and future study of unresolved questions.

Bigeye Bomb: Unresolved Development Issues

DTIC Science & Technology

1989-08-11

the lethal agent formed inside the Bigeye bomb) at the purity or equivalent- biotoxicity level required by the Test and Eval- uation Master Plan (TEMP...during the 5 through 30-second period after mixing starts, with- out specifying either wheit the required purity or equivalent biotoxicity level should...revision of the purity or equivalent biotoxicity requirement. However, we believe that a bomb that produces lethal agent at the required purity level for 1

Calcium in the prevention of postmenopausal osteoporosis: EMAS clinical guide.

PubMed

Cano, Antonio; Chedraui, Peter; Goulis, Dimitrios G; Lopes, Patrice; Mishra, Gita; Mueck, Alfred; Senturk, Levent M; Simoncini, Tommaso; Stevenson, John C; Stute, Petra; Tuomikoski, Pauliina; Rees, Margaret; Lambrinoudaki, Irene

2018-01-01

Postmenopausal osteoporosis is a highly prevalent disease. Prevention through lifestyle measures includes an adequate calcium intake. Despite the guidance provided by scientific societies and governmental bodies worldwide, many issues remain unresolved. To provide evidence regarding the impact of calcium intake on the prevention of postmenopausal osteoporosis and critically appraise current guidelines. Literature review and consensus of expert opinion. The recommended daily intake of calcium varies between 700 and 1200mg of elemental calcium, depending on the endorsing source. Although calcium can be derived either from the diet or supplements, the former source is preferred. Intake below the recommended amount may increase fragility fracture risk; however, there is no consistent evidence that calcium supplementation at, or above, recommended levels reduces risk. The addition of vitamin D may minimally reduce fractures, mainly among institutionalised people. Excessive intake of calcium, defined as higher than 2000mg/day, can be potentially harmful. Some studies demonstrated harm even at lower dosages. An increased risk for cardiovascular events, urolithiasis and even fractures has been found in association with excessive calcium intake, but this issue remains unresolved. In conclusion, an adequate intake of calcium is recommended for general bone health. Excessive calcium intake seems of no benefit, and could possibly be harmful. Copyright © 2017 Elsevier B.V. All rights reserved.

Review of SiCf/SiCm corrosion, erosion and erosion-corrosion in high temperature helium relevant to GFR conditions

NASA Astrophysics Data System (ADS)

Fitzgerald, Kerr; Shepherd, Daniel

2018-01-01

The good thermal, mechanical and nuclear properties of silicon carbide composites (SiCf/SiCm) has led to their proposal as a gas-cooled fast reactor (GFR) fuel cladding material. Accordingly, previous studies on the corrosion, erosion and erosion-corrosion of SiCf/SiCm have been reviewed. A significant amount of corrosion data was compared for various SiCf/SiCm types tested under different conditions, which suggested that it may be suitable for use in a GFR. However some issues remain, specifically the potential for removal by oxidation of the pyrolytic carbon (PyC) interphase below 900 °C and highly damaging active oxidation at temperatures above 1200 °C. Few relevant papers were found on the erosion and erosion-corrosion behaviour of SiCf/SiCm, though those that were did indicate improved erosion resistance compared to metals. However, most data concerned particulate rather than gas erosion, and at relatively low temperatures. Exacerbation of erosion by corrosion (and vice versa) is hypothesised due to both phenomena potentially causing and being worsened by increased composite porosity. The possibility for this to be further exacerbated mechanically was also identified e.g. by surface damage or by crack formation and growth. The potential impact of irradiation in fast reactor conditions also needs to be better understood. Overall, limited data was found that is representative of anticipated GFR conditions and only in the form of separate effect corrosion tests, thus highlighting the need for erosion and combined effect experiments to progress SiCf/SiCm towards qualification as GFR fuel cladding. Finally, some potential means for improving performance have been identified including environmental adjustment and/or alternative composite design.

The theory and application of space microbiology: China's experiences in space experiments and beyond.

PubMed

Liu, Changting

2017-02-01

Microorganisms exhibit high adaptability to extreme environments of outer space via phenotypic and genetic changes. These changes may affect astronauts in the space environment as well as on Earth because mutant microbes will inevitably return with the spacecraft. However, the role and significance of these phenotypic changes and the underlying mechanisms are important unresolved questions in the field of space biology. By reviewing, especially the Chinese studies, we propose a space microbial molecular effect theory, that is, the space environment affects the nature of genes and the molecular structure of microorganisms to produce phenotypic changes. In this review, we discussed three basic theories for the research of space microbiology, including (1) space microbial pathogenicity and virulence mutations and the human mutualism theory; (2) space microbial drug-resistance mutations and metabolism associated with space pharmaceuticals theory; (3) space corrosion, microbial decontamination, and new materials technology theory. © 2016 Society for Applied Microbiology and John Wiley & Sons Ltd.

Proceedings of the International Congress (12th), Corrosion Control for Low-Cost Reliability, Held in Houston, Texas on September 19-24, 1993. Volume 5B. Corrosion: General Issues

DTIC Science & Technology

1993-09-24

and to provide basic data for the development of new materials with anticorrosion and antifouling properties. Experimental Methods Thiobacillus thio...directors, members thereof, nor instructors accept any responsibility for the use of the methods and materials discussed herein. Any goods, products...information is advisory only, and use of the materials and methods is solely at the risk of the user. Pninted in the USA. All rights reserved. This book, or

Show me the money: the implications of Schedule H.

PubMed

Salinsky, Eileen

2009-04-21

Responding to policymakers' concerns, the Internal Revenue Service (IRS) implemented significant new hospital community benefit reporting under Schedule H of its revised Form 990, the return used by tax-exempt organizations. This issue brief considers the policy implications of the quantitative and qualitative information that hospitals are now mandated to report through Schedule H, including the costs associated with charity care, bad debt, and the unreimbursed costs of Medicaid and Medicare. The paper examines unresolved issues related to the new reporting requirements, such as controversies regarding the scope of Schedule H, and considers the potential for these reports to influence IRS oversight activities, legislative action, and hospital policies and practices.

High-rise housing in the city of Samara: the first steps on the path to sustainable development

NASA Astrophysics Data System (ADS)

Vavilova, Tatiana Ya.; Makeeva, Elena Yu.

2018-03-01

This paper outlines theoretical background of high-rise housing and discusses its design experience. It particularly focuses on environmental, social and economic aspects which are among crucial sustainable development issues. The authors dwell upon the implementation of innovative solutions that meet principles and goals of sustainable development and take construction objects built in Samara (which is one of the largest metropolises in Russia) as an example. The research also investigates the quality of project designs and reveals techniques corresponding to the "green standards". It considers the issues of practicing high-rise building construction in specific urban conditions and identifies unresolved architectural problems.

Auditory subliminal stimulation: a re-examination.

PubMed

Urban, M J

1992-04-01

Unconscious or subliminal perception has historically been a thorny issue in psychology. It has been the subject of debate and experimentation since the turn of the century. While psychologists now agree that the phenomenon of visual subliminal stimulation is real, disagreement continues over the effects of such stimulation as well as to its existence in other sensory modalities, notably the auditory. The present paper provides an overview of unresolved issues in auditory subliminal stimulation which explains much of the difficulty that has been encountered in experimental work in this area. A context is proposed for considering the effects of auditory subliminal stimulation and an overview of current investigations in this field is provided.

Linear Cracking in Bridge Decks

DOT National Transportation Integrated Search

2018-03-01

Concrete cracking in bridge decks remains an important issue relative to deck durability. Cracks can allow increased penetration of chlorides, which can result in premature corrosion of the reinforcing steel and subsequent spalling of the concrete de...

The Effect of Some Key Changes in the Chemistry of Water in Relation to Copper and Brass Corrosion Control

NASA Astrophysics Data System (ADS)

Gorovei, M. C.; Benea, L.

2018-06-01

Corrosion means the degradation of the metals or their alloys, under the action of chemical or electrochemical agents from the environment. The complex corrosion phenomenon has a destructive action, generating undesirable economic consequences: metals and labor losses, appreciable reduction in the lifetime of various metal constructions, insecurity in the operation of industrial machinery. Under the current conditions of accelerated growth in the production of material goods, one of the most important issues is the economy of raw materials and materials, energy and labor force. Copper, having a purity of over 99%, is used in the manufacture of gas and water pipes, roofing materials, utensils and ornamental objects. Brass is used in the manufacture of flexible tubes, pipes, coils, cartridges, various electrochemical parts, jewelry, etc. The aim of this research work was to evaluate the corrosion resistance of copper and brass in various solutions: with different chloride ions as 35 g/L NaCl, waste water and tap water. The corrosion behavior of copper and brass was analyzed by electrochemical methods, such as: open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Pure copper exhibits more noble potential values than its alloy (brass), according to the evolution of free potential in all tested solutions. After performing the electrochemical assays, ex-situ investigations, by optical microscopy, were made and the results confirm that the chloride ions affect the corrosion behavior of copper and brass. Corrosion of materials is a very important process to consider when choosing a material that has to operate in a specific environment.

Chemical Species in the Vapor Phase of Hanford Double-Shell Tanks: Potential Impacts on Waste Tank Corrosion Processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Felmy, Andrew R.; Qafoku, Odeta; Arey, Bruce W.

2010-09-22

The presence of corrosive and inhibiting chemicals on the tank walls in the vapor space, arising from the waste supernatant, dictate the type and degree of corrosion that occurs there. An understanding of how waste chemicals are transported to the walls and the affect on vapor species from changing supernatant chemistry (e.g., pH, etc.), are basic to the evaluation of risks and impacts of waste changes on vapor space corrosion (VSC). In order to address these issues the expert panel workshop on double-shell tank (DST) vapor space corrosion testing (RPP-RPT-31129) participants made several recommendations on the future data and modelingmore » needs in the area of DST corrosion. In particular, the drying of vapor phase condensates or supernatants can form salt or other deposits at the carbon steel interface resulting in a chemical composition at the near surface substantially different from that observed directly in the condensates or the supernatants. As a result, over the past three years chemical modeling and experimental studies have been performed on DST supernatants and condensates to predict the changes in chemical composition that might occur as condensates or supernatants equilibrate with the vapor space species and dry at the carbon steel surface. The experimental studies included research on both the chemical changes that occurred as the supernatants dried as well as research on how these chemical changes impact the corrosion of tank steels. The chemical modeling and associated experimental studies were performed at the Pacific Northwest National Laboratory (PNNL) and the research on tank steel corrosion at the Savannah River National Laboratory (SRNL). This report presents a summary of the research conducted at PNNL with special emphasis on the most recent studies conducted in FY10. An overall summary of the project results as well as their broader implications for vapor space corrosion of the DST’s is given at the end of this report.« less

Corrosion of rock anchors in US coal mines

NASA Astrophysics Data System (ADS)

Bylapudi, Gopi

The mining industry is a major consumer of rock bolts in the United States. Due to the high humidity in the underground mining environment, the rock bolts corrode and loose their load bearing capacity which in turn reduces the life expectancy of the ground support and, thus, creates operational difficulties and number of safety concerns[1]. Research on rock anchor corrosion has not been adequately extensive in the past and the effects of several factors in the mine atmosphere and waters are not clearly understood. One of the probable reasons for this lack of research may be attributed to the time required for gathering meaningful data that makes the study of corrosion quite challenging. In this particular work underground water samples from different mines in the Illinois coal basin were collected and the major chemical content was analyzed and used for the laboratory testing. The corrosion performance of the different commercial rock anchors was investigated by techniques such as laboratory immersion tests in five different corrosion chambers, and potentiodynamic polarization tests in simulated ground waters based on the Illinois coal basin. The experiments were conducted with simulate underground mining conditions (corrosive). The tensile strengths were measured for the selected rock anchors taken every 3 months from the salt spray corrosion chambers maintained at different pH values and temperatures. The corrosion potential (Ecorr ), corrosion current (Icorr) and the corresponding corrosion rates (CR) of the selected commercial rock bolts: #5, #6, #6 epoxy coated and #7 forged head rebar steels, #6 and #7 threaded head rebar steels were measured at the solution pH values of 5 and 8 at room temperature. The open circuit potential (OCP) values of the different rock anchors were recorded in 3 selected underground coal mines (A, B & C) in the Illinois coal basin and the data compared with the laboratory electrochemical tests for analyzing the life of the rock anchors installed in the mines with respect to corrosion potential and corrosion current measured. The results of this research were statistically validated. This research will have direct consequence to the rock related safety. The results of this research indicate that certain corrosive conditions are commonly found in mines but uniform corrosion (around 0.01-0.03mm loss per year across the diameter) is generally not considered a serious issue. From this study, longer term research for longterm excavation support is recommended that could quantify the problem depending on the rock anchor used and specific strata conditions.

On Retirement of Physicians

PubMed Central

Levy, Roy

1986-01-01

This article takes a look at retirement in general, and the implications for physicians in particular. The recent application of the principles in the Canadian Charter of Rights has raised some unresolved issues for those doctors with contractual employment. They may no longer have mandatory retirement at age 65. Problems can and do arise when self-employed physicians defer retirement from active practice indefinitely. The evaluation of older physicians' competence is explored, and some suggestions offered. PMID:21267269

Surface integrity and corrosion performance of biomedical magnesium-calcium alloy processed by hybrid dry cutting-finish burnishing.

PubMed

Salahshoor, M; Li, C; Liu, Z Y; Fang, X Y; Guo, Y B

2018-02-01

Biodegradable magnesium-calcium (MgCa) alloy is a very attractive orthopedic biomaterial compared to permanent metallic alloys. However, the critical issue is that MgCa alloy corrodes too fast in the human organism. Compared to dry cutting, the synergistic dry cutting-finish burnishing can significantly improve corrosion performance of MgCa0.8 (wt%) alloy by producing a superior surface integrity including good surface finish, high compressive hook-shaped residual stress profile, extended strain hardening in subsurface, and little change of grain size. A FEA model was developed to understand the plastic deformation of MgCa materials during burnishing process. The measured polarization curves, surface micrographs, and element distributions of the corroded surfaces by burnishing show an increasing and uniform corrosion resistance to simulated body fluid. Copyright © 2017 Elsevier Ltd. All rights reserved.

Materials for Consideration in Standardized Canister Design Activities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bryan, Charles R.; Ilgen, Anastasia Gennadyevna; Enos, David George

2014-10-01

This document identifies materials and material mitigation processes that might be used in new designs for standardized canisters for storage, transportation, and disposal of spent nuclear fuel. It also addresses potential corrosion issues with existing dual-purpose canisters (DPCs) that could be addressed in new canister designs. The major potential corrosion risk during storage is stress corrosion cracking of the weld regions on the 304 SS/316 SS canister shell due to deliquescence of chloride salts on the surface. Two approaches are proposed to alleviate this potential risk. First, the existing canister materials (304 and 316 SS) could be used, but themore » welds mitigated to relieve residual stresses and/or sensitization. Alternatively, more corrosion-resistant steels such as super-austenitic or duplex stainless steels, could be used. Experimental testing is needed to verify that these alternatives would successfully reduce the risk of stress corrosion cracking during fuel storage. For disposal in a geologic repository, the canister will be enclosed in a corrosion-resistant or corrosion-allowance overpack that will provide barrier capability and mechanical strength. The canister shell will no longer have a barrier function and its containment integrity can be ignored. The basket and neutron absorbers within the canister have the important role of limiting the possibility of post-closure criticality. The time period for corrosion is much longer in the post-closure period, and one major unanswered question is whether the basket materials will corrode slowly enough to maintain structural integrity for at least 10,000 years. Whereas there is extensive literature on stainless steels, this evaluation recommends testing of 304 and 316 SS, and more corrosion-resistant steels such as super-austenitic, duplex, and super-duplex stainless steels, at repository-relevant physical and chemical conditions. Both general and localized corrosion testing methods would be used to establish corrosion rates and component lifetimes. Finally, it is unlikely that the aluminum-based neutron absorber materials that are commonly used in existing DPCs would survive for 10,000 years in disposal environments, because the aluminum will act as a sacrificial anode for the steel. We recommend additional testing of borated and Gd-bearing stainless steels, to establish general and localized corrosion resistance in repository-relevant environmental conditions.« less

American Nuclear Society 1994 student conference eastern region

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report contains abstracts from the 1994 American Nuclear Society Student Conference. The areas covered by these abstracts are: fusion and plasma physics; nuclear chemistry; radiation detection; reactor physics; thermal hydraulics; and corrosion science and waste issues.

0-6723 : development of rapid, cement-based repair materials for transportation structures.

DOT National Transportation Integrated Search

2014-08-01

The state of Texas has been plagued by various : durability-related issues in recent years, : including deterioration from alkali-silica : reaction, delayed ettringite formation, corrosion : of reinforcing steel, volume changes (plastic : shrinkage, ...

Corrosion Issues for Ceramics in Gas Turbines

NASA Technical Reports Server (NTRS)

Jacobson, Nathan; Opila, Elizabeth; Nickel, Klaus G.

2004-01-01

The requirements for hot-gas-path materials in gas turbine engines are demanding. These materials must maintain high strength and creep resistance in a particularly aggressive environment. A typical gas turbine environment involves high temperatures, rapid gas flow rates, high pressures, and a complex mixture of aggressive gases. Over the past forty years, a wealth of information on the behavior of ceramic materials in heat engine environments has been obtained. In the first part of the talk we summarize the behavior of monolithic SiC and Si3N4. These materials show excellent baseline behavior in clean, oxygen environments. However the aggressive components in a heat engine environment such as water vapor and salt deposits can be quite degrading. In the second part of the talk we discuss SiC-based composites. The critical issue with these materials is oxidation of the fiber coating. We conclude with a brief discussion of future directions in ceramic corrosion research.

A study of early corrosion behaviors of FeCrAl alloys in liquid lead-bismuth eutectic environments

NASA Astrophysics Data System (ADS)

Lim, Jun; Nam, Hyo On; Hwang, Il Soon; Kim, Ji Hyun

2010-12-01

Lead and lead-bismuth eutectic (LBE) alloy have been increasingly receiving attention as heavy liquid metal coolants (HLMC) for future nuclear energy systems. The compatibility of structural materials and components with lead-bismuth eutectic liquid at high temperature is one of key issues for the commercialization of lead fast reactors. In the present study, the corrosion behaviors of iron-based alumina-forming alloys (Kanthal-AF®, PM2000, MA956) were investigated by exposing to stagnant LBE environments at 500 °C and 550 °C for up to 500 h. After exposures, the thickness and chemistry of the oxide layer on the specimens were analyzed by scanning electron microscopy, scanning transmission electron microscopy and energy dispersive X-ray spectroscopy. As a result, the oxide characteristics and the corrosion resistance were compared. In this study, it was shown that the corrosion resistance of FeCrAl ODS steels (PM2000, MA956) are superior to that of FeCrAl ferritic steel (Kanthal-AF®) in higher temperature LBE.

Corrosion Evaluation of RERTR Uranium Molybdenum Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

A K Wertsching

2012-09-01

As part of the National Nuclear Security Agency (NNSA) mandate to replace the use of highly enriched uranium (HEU) fuel for low enriched uranium (LEU) fuel, research into the development of LEU fuel for research reactors has been active since the late 1970’s. Originally referred to as the Reduced Enrichment for Research and Test Reactor (RERTR) program the new effort named Global Threat Reduction Initiative (GTRI) is nearing the goal of replacing the standard aluminum clad dispersion highly enriched uranium aluminide fuel with a new LEU fuel. The five domestic high performance research reactors undergoing this conversion are High Fluxmore » Isotope reactor (HFIR), Advanced Test Reactor (ATR), National Institute of Standards and Technology (NIST) Reactor, Missouri University Research Reactor (MURR) and the Massachusetts Institute of Technology Reactor II (MITR-II). The design of these reactors requires a higher neutron flux than other international research reactors, which to this point has posed unique challenges in the design and development of the new mandated LEU fuel. The new design utilizes a monolithic fuel configuration in order to obtain sufficient 235U within the LEU stoichoimetry to maintain the fission reaction within the domestic test reactors. The change from uranium aluminide dispersion fuel type to uranium molybdenum (UMo) monolithic configuration requires examination of possible corrosion issues associated with the new fuel meat. A focused analysis of the UMo fuel under potential corrosion conditions, within the ATR and under aqueous storage indicates a slow and predictable corrosion rate. Additional corrosion testing is recommended for the highest burn-up fuels to confirm observed corrosion rate trends. This corrosion analysis will focus only on the UMo fuel and will address corrosion of ancillary components such as cladding only in terms of how it affects the fuel. The calculations and corrosion scenarios are weighted with a conservative bias to provide additional confidence with the results. The actual corrosion rates of UMo fuel is very likely to be lower than assumed within this report which can be confirmed with additional testing.« less

Effect of sulfate on the transformation of corrosion scale composition and bacterial community in cast iron water distribution pipes.

PubMed

Yang, Fan; Shi, Baoyou; Bai, Yaohui; Sun, Huifang; Lytle, Darren A; Wang, Dongsheng

2014-08-01

The chemical stability of iron corrosion scales and the microbial community of biofilm in drinking water distribution system (DWDS) can have great impact on the iron corrosion and corrosion product release, which may result in "red water" issues, particularly under the situation of source water switch. In this work, experimental pipe loops were set up to investigate the effect of sulfate on the dynamical transformation characteristics of iron corrosion products and bacterial community in old cast iron distribution pipes. All the test pipes were excavated from existing DWDS with different source water supply histories, and the test water sulfate concentration was in the range of 50-350 mg/L. Pyrosequencing of 16S rRNA was used for bacterial community analysis. The results showed that iron release increased markedly and even "red water" occurred for pipes with groundwater supply history when feed water sulfate elevated abruptly. However, the iron release of pipes with only surface water supply history changed slightly without noticeable color even the feed water sulfate increased multiply. The thick-layered corrosion scales (or densely distributed tubercles) on pipes with surface water supply history possessed much higher stability due to the larger proportion of stable constituents (mainly Fe3O4) in their top shell layer; instead, the rather thin and uniform non-layered corrosion scales on pipes with groundwater supply history contained relatively higher proportion of less stable iron oxides (e.g. β-FeOOH, FeCO3 and green rust). The less stable corrosion scales tended to be more stable with sulfate increase, which was evidenced by the gradually decreased iron release and the increased stable iron oxides. Bacterial community analysis indicated that when switching to high sulfate water, iron reducing bacteria (IRB) maintained dominant for pipes with stable corrosion scales, while significant increase of sulfur oxidizing bacteria (SOB), sulfate reducing bacteria (SRB) and iron oxidizing bacteria (IOB) was observed for pipes with less stable corrosion scales. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Role of Deformation and Microchemistry in the Corrosion Processes of Type 304 Stainless Steel in Simulated Pressurized Water Reactor Environments

NASA Astrophysics Data System (ADS)

Fisher, Kevin B.

Degradation of structural components in nuclear environments is a limiting factor in the lifetime of nuclear power plants. Despite decades of research on the topic, there are still aspects of the degradation phenomena that are not well understood, leading to premature failure of components that can be both expensive to repair and potentially dangerous. The current work addresses the role of material deformation on the corrosion phenomena of 304 SS in a simulated nuclear reactor environment by studying the relationship of the material microstructure and microchemistry with the resulting corrosion products using a multiscale analysis approach. The general corrosion phenomenon was studied in relation to the surface deformation of the material, and it was determined that surface deformation not only increases the rate of oxidation, but also has a pronounced impact on the microchemical structure of the oxide film when compared to undeformed material. These findings were applied to understanding the role of deformation in the more complex corrosion phenomena of stress corrosion cracking (SCC) and corrosion fatigue cracking (CFC). In SCC experiments, material deformation in the form of cold work played a synergistic role with unique microchemical features of the materials studied to promote the cracking process under certain environmental and material heat treatment conditions. Despite the fact that the materials studied were low carbon heats of 304L SS thought to be immune to the sensitization and therefore resistant to SCC, elevated boron and delta ferrites in the material were implicated in the SCC susceptibility after heat treatment. On the other hand, low levels of residual deformation played only a minor role in the corrosion processes occurring during CFC experiments over a wide range of rise times. Instead, deformation was suspected to play a larger role in the mechanical cracking response of the material. By studying multiple corrosion processes of 304 SS a greater understanding of the role of deformation and microchemical factors in the related corrosion phenomena has been achieved, and provides evidence that material and component fabrication, in terms of surface and bulk deformation, material microchemistry, and heat treatment must be considered to avoid degradation issues.

Modeling of concrete cracking due to corrosion process of reinforcement bars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bossio, Antonio, E-mail: antonio.bossio@unina.it; Monetta, Tullio, E-mail: monetta@unina.it; Bellucci, Francesco, E-mail: bellucci@unina.it

The reinforcement corrosion in Reinforced Concrete (RC) is a major reason of degradation for structures and infrastructures throughout the world leading to their premature deterioration before design life was attained. The effects of corrosion of reinforcement are: (i) the reduction of the cross section of the bars, and (ii) the development of corrosion products leading to the appearance of cracks in the concrete cover and subsequent cover spalling. Due to their intrinsic complex nature, these issues require an interdisciplinary approach involving both material science and structural design knowledge also in terms on International and National codes that implemented the conceptmore » of durability and service life of structures. In this paper preliminary FEM analyses were performed in order to simulate pitting corrosion or general corrosion aimed to demonstrate the possibility to extend the results obtained for a cylindrical specimen, reinforced by a single bar, to more complex RC members in terms of geometry and reinforcement. Furthermore, a mechanical analytical model to evaluate the stresses in the concrete surrounding the reinforcement bars is proposed. In addition, a sophisticated model is presented to evaluate the non-linear development of stresses inside concrete and crack propagation when reinforcement bars start to corrode. The relationships between the cracking development (mechanical) and the reduction of the steel section (electrochemical) are provided. Finally, numerical findings reported in this paper were compared to experimental results available in the literature and satisfactory agreement was found.« less

A review on the current issues and barriers of Industrialised Building System (IBS) adoption in Malaysia’s construction industry

NASA Astrophysics Data System (ADS)

Amin, M. A. Mohd; Abas, N. H.; Shahidan, S.; Rahmat, M. H.; Suhaini, N. A.; Nagapan, S.; Rahim, R. Abdul

2017-11-01

Malaysia considers the construction industry as one of the main contributors to its Gross Domestic Product (GDP). However, there are some unresolved issues arising from the ongoing and widespread adoption of the conventional method of construction such as the resultant fragmentation of the industry itself; delays in production and delivery time of unnecessary wastages and lack of sustainability practice. Malaysian Government has been continuously encouraging the industry to use, partly or if not wholly, the Industrialized Building System (IBS), which is considered to be an important part of sustainable construction initiative. IBS was introduced to Malaysia as the solution to issues related to dependencies of foreign workers, raising demand for affordable accommodations and improving image, quality and productivity of construction industry. However, the IBS adoption in Malaysia remains low. This paper presents the review of the current issues and barriers of IBS adoption in Malaysian construction industry.

Characterization of Stress Corrosion Cracking Using Laser Ultrasonics

DOT National Transportation Integrated Search

2008-08-31

In-service inspection of gas and oil pipelines is a subject of great current interest. Issues of safety and fitness for service have driven extensive efforts to develop effective monitoring and inspection techniques. A number of effective NDT techniq...

COPPER RESEARCH UPDATE

EPA Science Inventory

This presentation provides an update and overview of new research results and remaining research needs with respect to copper corrosion control issues. The topics to be covered include: occurrence of elevated copper release in systems that meet the Action Level; impact of water c...

Special cluster issue on tribocorrosion of dental materials

NASA Astrophysics Data System (ADS)

Mathew, Mathew T.; Stack, Margaret M.

2013-10-01

Tribocorrosion affects all walks of life from oil and gas conversion to biomedical materials. Wear can interact with corrosion to enhance it or impede it; conversely, corrosion can enhance or impede wear. The understanding of the interactions between physical and chemical phenomena has been greatly assisted by electrochemical and microscopic techniques. In dentistry, it is well recognized that erosion due to dissolution (a term physicists use to denote wear) of enamel can result in tooth decay; however, the effects of the oral environment, i.e. pH levels, electrochemical potential and any interactions due to the forces involved in chewing are not well understood. This special cluster issue includes investigations on the fundamentals of wear-corrosion interactions involved in simulated oral environments, including candidate dental implant and veneer materials. The issue commences with a fundamental study of titanium implants and this is followed by an analysis of the behaviour of commonly used temporomandibular devices in a synovial fluid-like environment. The analysis of tribocorrosion mechanisms of Ti6Al4V biomedical alloys in artificial saliva with different pHs is addressed and is followed by a paper on fretting wear, on hydroxyapatite-titanium composites in simulated body fluid, supplemented with protein (bovine serum albumin). The effects of acid treatments on tooth enamel, and as a surface engineering technique for dental implants, are investigated in two further contributions. An analysis of the physiological parameters of intraoral wear is addressed; this is followed by a study of candidate dental materials in common beverages such as tea and coffee with varying acidity and viscosity and the use of wear maps to identify the safety zones for prediction of material degradation in such conditions. Hence, the special cluster issue consists of a range of tribocorrosion contributions involving many aspects of dental tribocorrosion, from analysis of physiological approaches and tissue engineering to studying of the effects of the environments encountered in clinical practice and management which lead to tooth decay. A wide range of analytical techniques and tribocorrosion experimental approaches is used to simulate, assess and model the synergistic interactions of wear and corrosion, many of them leading to new insights. We hope it will lead to increased awareness of tribocorrosion phenomena for researchers and dental clinicians alike and 'food for thought' for further studies in this field.

Status of NO sub x control for coal-fired power plants

NASA Technical Reports Server (NTRS)

Teixeira, D. P.

1978-01-01

The status of technologies for controlling emissions of oxides of nitrogen (NOx) from coal-fired power plants is reviewed. A discussion of current technology as well as future NOx control approaches is presented. Advanced combustion approaches are included as well as post-combustion alternatives such as catalytic and noncatalytic ammonia-bases systems and wet scrubbing. Special emphasis is given to unresolved development issues as they relate to practical applications on coal-fired power plants.

MCNP/X TRANSPORT IN THE TABULAR REGIME

DOE Office of Scientific and Technical Information (OSTI.GOV)

HUGHES, H. GRADY

2007-01-08

The authors review the transport capabilities of the MCNP and MCNPX Monte Carlo codes in the energy regimes in which tabular transport data are available. Giving special attention to neutron tables, they emphasize the measures taken to improve the treatment of a variety of difficult aspects of the transport problem, including unresolved resonances, thermal issues, and the availability of suitable cross sections sets. They also briefly touch on the current situation in regard to photon, electron, and proton transport tables.

Shock and Awe. Achieving Rapid Dominance

DTIC Science & Technology

1996-09-01

par- adox of the issue of planning for a long - versus -short war in a nuclear world remained unresolved. 4 Shock and AweMobilization, as in World War...world and are likely to remain so for a long time to come. Why then, many will ask, should we examine and even propose major excursions and...after battle. Today, x we believe that an unusual opportunity exists to determine whether or not this long -sought strategic goal of affecting the

Understanding Cultural Landmines in the Balkans: How the Land and Its History Have Kept a People at War

DTIC Science & Technology

2001-10-01

property , forcible eviction of entire villages, widespread rape and torture, and massacres of innocent women, children, and the elderly BALKANS-1 6...and Italy also have unresolved issues dating from World War II over property and ethnic minority rights. Serbia and Montenegro also dispute Croatia’s...positions (Jayne, 1910). Dating from the Ottoman occupation, Moslem nobles and landlords held all land other than gardens and residential properties

The P-38 Lightning Aircraft: Lessons Learned for Future Weapon Systems Development

DTIC Science & Technology

2010-04-01

PMBOK TEL \\ u.s. WER List of ~cronyms iv Brake Horse Power Design-Build Team District of Columbia Department of Defense Department of...record. Despite unresolved issues like the flap and brake system problems and limited test hours, on 11 February 1939, Lieutenant Kelsey flew the XP-38...engine, giving the P-3 8 engines a 1425 brake horse power (BHP)22 rating. However, limitations of the integral wing leading edge intercoolers23 could

Interactions Between Structure and Processing that Control Moisture Uptake in High-Performance Polycyanurates (Briefing Charts)

DTIC Science & Technology

2015-03-24

distribution is unlimited.  . Interactions Between Structure and Processing that Control Moisture Uptake in High-Performance Polycyanurates Presenter: Dr...Edwards AFB, CA 4 California State University, Long Beach, CA 90840 2 Outline: Basic Studies of Moisture Uptake in Cyanate Ester Networks • Background...Motivation • SOTA Theories of Moisture Uptake in Thermosetting Networks • New Tools and New Discoveries • Unresolved Issues and Ways to Address Them

A rederivation of the conformal anomaly for spin-{\\frac{1}{2}}

NASA Astrophysics Data System (ADS)

Godazgar, Hadi; Nicolai, Hermann

2018-05-01

We rederive the conformal anomaly for spin- fermions by a genuine Feynman graph calculation, which has not been available so far. Although our calculation merely confirms a result that has been known for a long time, the derivation is new, and thus furnishes a method to investigate more complicated cases (in particular concerning the significance of the quantum trace of the stress tensor in non-conformal theories) where there remain several outstanding and unresolved issues.

Implementing advanced nurse practitioner roles in acute care: an evaluation of organizational change.

PubMed

Cummings, Greta G; Fraser, Kim; Tarlier, Denise S

2003-03-01

Medical shortages are seen as the driving force behind the recent implementation of the advanced nurse practitioner (ANP) role in some Canadian hospitals. The authors analyzed the implementation of the ANP role in one tertiary care teaching hospital from the organizational change perspective. Despite successful implementation, issues of role definition, scope of practice boundaries, and staff reactions remain unresolved. Recommendations are discussed for implementing ANP roles in other acute care facilities.

A biologic perspective on sexual orientation.

PubMed

Pillard, R C; Bailey, J M

1995-03-01

Sexual orientation may be defined as the sustained erotic attraction to members of one's own gender, the opposite gender, or both--homosexual, heterosexual, or bisexual, respectively. Interest in sexual orientation is as old as the science of psychology, yet many fundamental issues remain unresolved. This article reviews research in the development and psychopathology of sexual orientation as well as the results of family and twin studies. Research in genetic linkage, sex hormones, and brain differences also is discussed.

The Image of the 1967 War in Israeli History Textbooks as Test Case: Studying an Active Past in a Protracted Regional Conflict

ERIC Educational Resources Information Center

Yogev, Esther

2012-01-01

This article seeks to shed light on the dilemma facing history education in regions beset by a protracted, and as yet unresolved ethno-political conflict. The article will examine this issue by means of a unique test case that observes a dramatic war event in Israeli textbooks. The event in question is the Six-Day War of 1967 and the study of its…

How Do Individuals Develop Alcohol Use Disorder After Bariatric Surgery? A Grounded Theory Exploration.

PubMed

Yoder, Ruth; MacNeela, Padraig; Conway, Ronan; Heary, Caroline

2018-03-01

Bariatric surgery is the most effective treatment for severe obesity. However, following Roux-en-Y gastric bypass (RYGB) surgery, a small minority of patients develop new-onset alcohol use disorder (AUD), the aetiology of which is poorly understood. The aim is to construct a theory to explain the development of AUD among a sample of individuals who reported problematic drinking following RYGB. Semi-structured interviews were conducted with eight RYGB patients diagnosed with AUD attending a multi-disciplinary outpatient weight management service at a public hospital in the Republic of Ireland. A constructivist grounded theory methodology was used to analyse interview transcripts. Participants' main concern was identified as 'unresolved psychological issues' which were managed by 'external coping mechanisms', namely, 'eating to cope'. After RYGB, comfort eating was no longer possible to the same extent. Following a 'honeymoon period', participants' need for an external coping mechanism resurfaced. 'Filling the void' provides a framework to explain how participants managed the symptoms of their unresolved psychological issues through 'behavioural substitution', that is, drinking alcohol instead of eating. The theoretical framework of 'filling the void' adds to contemporary research that conceptualises AUD behavioural substitution as 'addiction transfer' by describing the process by which the phenomenon occurs as well as the characteristics of participants. The clinical implication of this research is to advocate for a reshaping of treatment of RYGB patients, with increased psychological input following surgery.

The ethics of human volunteer studies involving experimental exposure to pesticides: unanswered dilemmas

PubMed Central

2010-01-01

The controversy about the use of data from human volunteer studies involving experimental exposure to pesticides as part of regulatory risk assessment has been widely discussed, but the complex and interrelated scientific and ethical issues remain largely unresolved. This discussion paper, generated by authors who comprised a workgroup of the ICOH Scientific Committee on Rural Health, reviews the use of human experimental studies in regulatory risk assessment for pesticides with a view to advancing the debate as to when, if ever, such studies might be ethically justifiable. The discussion is based on three elements: (a) a review of discussion papers on the topic of human testing of pesticides and the positions adopted by regulatory agencies in developed countries; (b) an analysis of published and unpublished studies involving human testing with pesticides, both in the peer-reviewed literature and in the JMPR database; and (c) application of an ethical analysis to the problem. The paper identifies areas of agreement which include general principles that may provide a starting point on which to base criteria for judgements as to the ethical acceptability of such studies. However, the paper also highlights ongoing unresolved differences of opinion inherent in ethical analysis of contentious issues, which we propose should form a starting point for further debate and the development of guidelines to achieve better resolution of this matter. PMID:20718963

Use of Repeated Fluoropolymer Suspensions to Obtain Composite Electrochemical Coating Based on Zinc

NASA Astrophysics Data System (ADS)

Musikhina, T. A.; Zemtsova, E. A.; Fuks, C. L.

2017-11-01

This article deals with the issues of utilization of the waste products of fluoropolymers, namely, the suspensions of fluoroplasts that have lost their consumer properties. Such waste is recommended to be used as a filler of zinc coatings to provide increased corrosion resistance. Using the method of mathematical planning of the experiment, the authors establish the optimal compositions of galvanizing chloride-ammonium electrolytes to obtain the corrosion-resistant composite electrochemical coatings (CEC) of zinc-fluoropolymer. As a result, coatings with a finely crystalline structure were obtained differing in the distribution pattern on the surface of the samples and depending on the variation in the zinc concentration in the electrolytes. The samples of steel reinforcement with the zinc-fluoropolymer coating were tested on corrosion resistance. The increase of anticorrosive properties in CEC zinc-fluoropolymer and a slight decrease in microhardness were indicated.

Attachment theory: progress and future directions.

PubMed

Fearon, R M Pasco; Roisman, Glenn I

2017-06-01

Attachment is a key subfield in the area of parenting and parent-child relationships research. In this brief overview, we summarise what we consider to be the state-of-the-art of attachment research, focusing primarily on the nature and significance of attachment in infancy and early childhood. We review 4 major topics that are central issues in the scientific literature on attachment: (1) the role of the environment in the development of attachment, (2) the intergenerational transmission of patterns of attachment, (3) the stability of attachment patterns through early adulthood, and (4) the role of attachment in adjustment and maladjustment. We conclude by highlighting several critical unresolved issues and priorities for future research. Copyright © 2017. Published by Elsevier Ltd.

Effects of metric change on safety in the workplace for selected occupations

NASA Astrophysics Data System (ADS)

Lefande, J. M.; Pokorney, J. L.

1982-04-01

The study assesses the potential safety issues of metric conversion in the workplace. A purposive sample of 35 occupations based on injury and illnesses indexes were assessed. After an analysis of workforce population, hazard analysis and measurement sensitivity of the occupations, jobs were analyzed to identify potential safety hazards by industrial hygienists, safety engineers and academia. The study's major findings were as follows: No metric hazard experience was identified. An increased exposure might occur when particular jobs and their job tasks are going the transition from customary measurement to metric measurement. Well planned metric change programs reduce hazard potential. Metric safety issues are unresolved in the aviation industry.

Coherent versus noncoherent signaling for satellite-aided mobile communications

NASA Technical Reports Server (NTRS)

Davarian, F.; Sumida, J.

1986-01-01

The use of coherent versus noncoherent communications is an unresolved issue for the mobile satellite community. Should one select the more robust but less efficient noncoherent strategy for communications over satellite-aided mobile channels, or does the introduction of a space platform in the mobile link improve signal stability (both amplitude and phase) such that conventional coherent schemes become attractive? This publication tries to answer some of the questions by discussing the results from experiments using a coherent QPSK receiver. The issues discussed include items such as the measured performance in Rician fading, the link error floor in a fading environment, etc. The results are compared and contrasted with that of a noncoherent limiter/discriminator FM receiver.

From Cases to Capacity? A Critical Reflection on the Role of ‘Ethical Dilemmas’ in the Development of Dual-Use Governance

PubMed Central

Edwards, Brett; Revill, James; Bezuidenhout, Louise

2016-01-01

The dual-use issue is often framed as a series of paralyzing ‘dilemmas’ facing the scientific community as well as institutions which support innovation. While this conceptualization of the dual-use issue can be useful in certain contexts (such as in awareness-raising and as part of educational activities directed at the scientific community) its usefulness is more limited when reflecting on the governance and politics of the dual-use issue. Within this paper, key shortcomings of the dilemma framing are outlined. It is argued that many of the issues raised in the most recent debates about ‘dual-use’ bird flu research remain unresolved. This includes questions about the trajectories of certain lines of research, as well as broader trends in the practice and governance of science. This leads to difficult questions about current approaches to the dual-use issue within the US, as well as internationally. PMID:23703451

Molten salt corrosion behavior of structural materials in LiCl-KCl-UCl3 by thermogravimetric study

NASA Astrophysics Data System (ADS)

Rao, Ch Jagadeeswara; Ningshen, S.; Mallika, C.; Mudali, U. Kamachi

2018-04-01

The corrosion resistance of structural materials has been recognized as a key issue in the various unit operations such as salt purification, electrorefining, cathode processing and injection casting in the pyrochemical reprocessing of spent metallic nuclear fuels. In the present work, the corrosion behavior of the candidate materials of stainless steel (SS) 410, 2.25Cr-1Mo and 9Cr-1Mo steels was investigated in molten LiCl-KCl-UCl3 salt by thermogravimetric analysis under inert and reactive atmospheres at 500 and 600 °C, for 6 h duration. Insignificant weight gain (less than 1 mg/cm2) in the inert atmosphere and marginal weight gain (maximum 5 mg/cm2) in the reactive atmosphere were observed at both the temperatures. Chromium depletion rates and formation of Cr-rich corrosion products increased with increasing temperature of exposure in both inert and reactive atmospheres as evidenced by SEM and EDS analysis. The corrosion attack by LiCl-KCl-UCl3 molten salt, under reactive atmosphere for 6 h duration was more in the case of SS410 than 9Cr-1Mo steel followed by 2.25Cr-1Mo steel at 500 °C and the corrosion attack at 600 °C followed the order: 9Cr-1Mo steel >2.25Cr-1Mo steel > SS410. Outward diffusion of the minor alloying element, Mo was observed in 9Cr-1Mo and 2.25Cr-1Mo steels at both temperatures under reactive atmosphere. Laser Raman spectral analysis of the molten salt corrosion tested alloys under a reactive atmosphere at 500 and 600 °C for 6 h revealed the formation of unprotected Fe3O4 and α-as well as γ-Fe2O3. The results of the present study facilitate the selection of structural materials for applications in the corrosive molten salt environment at high temperatures.

Dispersed storage and generation case studies

NASA Technical Reports Server (NTRS)

Bahrami, K.; Stallkamp, J. A.; Walton, A.

1980-01-01

Three installations utilizing separate dispersed storage and generation (DSG) technologies were investigated. Each of the systems is described in costs and control. Selected institutional and environmental issues are discussed, including life cycle costs. No unresolved technical, environmental, or institutional problems were encountered in the installations. The wind and solar photovoltaic DSG were installed for test purposes, and appear to be presently uneconomical. However, a number of factors are decreasing the cost of DSG relative to conventional alternatives, and an increased DSG penetration level may be expected in the future.

The structural changes in the bone tissue and regional lymph nodes when using bone cement

NASA Astrophysics Data System (ADS)

Zhukov, D. V.; Zajdman, A. M.; Prohorenko, V. M.; Ustikova, N. V.

2017-09-01

In orthopedics bone cement is used to replace defects. However, it is known that it possesses toxic properties, due to its composition monomer methyl methacrylate. There are some unresolved issues, in particular its local action, not investigated reaction of the immune system to respond to any fluctuations of endoecological equilibrium. All this helps to explain not only the intraoperative complications such as acute heart and lung failure, but also many deferred pathological processes, complications in the postoperative period.

Blueprint for Change: Research on Child and Adolescent Mental Health. Report of the National Advisory Mental Health Council's Workgroup on Child and Adolescent Mental Health Intervention Development and Deployment. Executive Summary and Recommendations.

ERIC Educational Resources Information Center

National Inst. of Mental Health (DHHS), Bethesda, MD.

Much has been learned about the identification and treatment of mental illness in children, but issues remain unresolved. Many of the traditional service models do not meet the needs of today's children. There is a shortage of evidence-based treatment and much of the evidence that does exist is not being used. Key findings in neuroscience,…

DWI at MR Enterography for Evaluating Bowel Inflammation in Crohn Disease.

PubMed

Park, Seong Ho

2016-07-01

The purpose of this article is to provide a comprehensive review regarding DWI enterography used for evaluating Crohn disease and to summarize the relevant evidence. Active bowel inflammation in Crohn disease causes restricted diffusion on MR enterography with DWI. Enterographic DWI to evaluate Crohn disease is increasingly drawing attention for both academic research and clinical practice and has shown potential as a quantitative tool for assessing bowel inflammation. DWI enterography also has multiple unresolved issues and limitations.

A Review: Advances on Absorption of Heavy Metals in the Waste Water by Biochar

NASA Astrophysics Data System (ADS)

Chen, Hao; Xie, Anbin; You, Shaohong

2018-01-01

Biochar as a new type of adsorbent, its physical and chemical characteristics and adsorption of heavy metal has been widely studied. Based on the current studies, the article reviewed the main characteristics of biochar, its influencing factors (preparation temperature, feed stocks, functional group et.) on adsorption of heavy metals in water and its mechanism of adsorption (ion exchange adsorption, complexation, precipitation sedimentation et.). Briefly summarize unresolved issues for potential applications of biochar in the future.

Conversion of Low Quality Waste Heat to Electric Power with Small-Scale Organic Rankine Cycle (ORC) Engine/Generator Technology

DTIC Science & Technology

2016-06-01

Allan Robichaux, DPW PWD GTMO and the management and staff of the GTMO on site contractor , Centerra. Page Intentionally Left Blank ii Table of...operations and maintenance contractor to ensure that data transfers are completed as required. Figure 4 shows the location of the ORC installation on MUSE...this issue with telephone support from CRM’s controls contractor (Winn-Marion, W-M); however, the problem remained unresolved as of Sept. 1 when

High Temperature Chemistry at NASA: Hot Topics

NASA Technical Reports Server (NTRS)

Jacobson, Nathan S.

2014-01-01

High Temperature issues in aircraft engines Hot section: Ni and Co based Superalloys Oxidation and Corrosion (Durability) at high temperatures. Thermal protection system (TPS) and RCC (Reinforced Carbon-Carbon) on the Space Shuttle Orbiter. High temperatures in other worlds: Planets close to their stars.

TACOM LCMC Industrial Base Engineering Support - Board of Directors

DTIC Science & Technology

2011-07-01

Hex Chrome Replacement (High Purity Aluminum) Capability o Advanced Aviation Forward Area Refueling System (AAFARS)Tech Data Development o Common...SIAD (As needed) Example Issues: • Hexavalent Chromium/Cadmium (RRAD) • Common Adhesive (ANAD) • AVLB Pressure Plate (ANAD) • Paladin Corrosion

Atomic level characterization in corrosion studies

NASA Astrophysics Data System (ADS)

Marcus, Philippe; Maurice, Vincent

2017-06-01

Atomic level characterization brings fundamental insight into the mechanisms of self-protection against corrosion of metals and alloys by oxide passive films and into how localized corrosion is initiated on passivated metal surfaces. This is illustrated in this overview with selected data obtained at the subnanometre, i.e. atomic or molecular, scale and also at the nanometre scale on single-crystal copper, nickel, chromium and stainless steel surfaces passivated in well-controlled conditions and analysed in situ and/or ex situ by scanning tunnelling microscopy/spectroscopy and atomic force microscopy. A selected example of corrosion modelling by ab initio density functional theory is also presented. The discussed aspects include the surface reconstruction induced by hydroxide adsorption and formation of two-dimensional (hydr)oxide precursors, the atomic structure, orientation and surface hydroxylation of three-dimensional ultrathin oxide passive films, the effect of grain boundaries in polycrystalline passive films acting as preferential sites of passivity breakdown, the differences in local electronic properties measured at grain boundaries of passive films and the role of step edges at the exposed surface of oxide grains on the dissolution of the passive film. This article is part of the themed issue 'The challenges of hydrogen and metals'.

Alternative to Nitric Acid for Passivation of Stainless Steel Alloys

NASA Technical Reports Server (NTRS)

Lewis, Pattie L.; Kolody, Mark; Curran, Jerry

2013-01-01

Corrosion is an extensive problem that affects the Department of Defense (DoD) and National Aeronautics and Space Administration (NASA). The deleterious effects of corrosion result in steep costs, asset downtime affecting mission readiness, and safety risks to personnel. Consequently, it is vital to reduce corrosion costs and risks in a sustainable manner. The DoD and NASA have numerous structures and equipment that are fabricated from stainless steel. The standard practice for protection of stainless steel is a process called passivation. Typical passivation procedures call for the use of nitric acid; however, there are a number of environmental, worker safety, and operational issues associated with its use. Citric acid offers a variety of benefits including increased safety for personnel, reduced environmental impact, and reduced operational cost. DoD and NASA agreed to collaborate to validate citric acid as an acceptable passivating agent for stainless steel. This paper details our investigation of prior work developing the citric acid passivation process, development of the test plan, optimization of the process for specific stainless steel alloys, ongoing and planned testing to elucidate the process' resistance to corrosion in comparison to nitric acid, and preliminary results.

Cyclic Polarization Behavior of ASTM A537-Cl.1 Steel in the Vapor Space Above Simulated Waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiersma, B

2004-11-01

An assessment of the potential degradation mechanisms of Types I and II High-Level Waste (HLW) Tanks determined that pitting corrosion and stress corrosion cracking were the two most significant degradation mechanisms. Specifically, nitrate induced stress corrosion cracking was determined to be the principal degradation mechanism for the primary tank steel of non-stress relieved tanks. Controls on the solution chemistry have been in place to preclude the initiation and propagation of degradation in the tanks. However, recent experience has shown that steel not in contact with the bulk waste solution or slurry, but exposed to the ''vapor space'' above the bulkmore » waste, may be vulnerable to the initiation and propagation of degradation, including pitting and stress corrosion cracking. A program to resolve the issues associated with potential vapor space corrosion is in place. The objective of the program is to develop understanding of vapor space (VSC) and liquid/air interface (LAIC) corrosion to ensure a defensible technical basis to provide accurate corrosion evaluations with regard to vapor space and liquid/air interface corrosion (similar to current evaluations). There are several needs for a technically defensible basis with sufficient understanding to perform these evaluations. These include understanding of the (1) surface chemistry evolution, (2) corrosion response through coupon testing, and (3) mechanistic understanding through electrochemical studies. Experimentation performed in FY02 determined the potential for vapor space and liquid/air interface corrosion of ASTM A285-70 and ASTM A537-Cl.1 steels. The material surface characteristics, i.e. mill-scale, polished, were found to play a key role in the pitting response. The experimentation indicated that the potential for limited vapor space and liquid/air interface pitting exists at 1.5M nitrate solution when using chemistry controls designed to prevent stress corrosion cracking. Experimentation performed in FY03 quantified pitting rates as a function of material surface characteristics, including mill-scale and defects within the mill-scale. Testing was performed on ASTM A537-Cl.1 (normalized) steel, the material of construction of the Type III HLW tanks. The pitting rates were approximately 3 mpy for exposure above inhibited solutions, as calculated from the limited exposure times. This translates to a penetration time of 166 years for a 0.5-in tank wall provided that the pitting rate remains constant and the bulk solution chemistry is maintained within the L3 limit. The FY04 testing consisted of electrochemical testing to potentially lend insight into the surface chemistry and further understand the corrosion mechanism in the vapor space. Electrochemical testing lends insight into the corrosion processes through the determination of current potential relationships. The results of the electrochemical testing performed during FY04 are presented here.« less

A Five-year Performance Study of Low VOC Coatings over Zinc Thermal Spray for the Protection of Carbon Steel at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

Kolody, Mark R.; Curran, Jerome P.; Calle, Luz Marina

2014-01-01

The launch facilities at the Kennedy Space Center (KSC) are located approximately 1000 feet from the Atlantic Ocean where they are exposed to salt deposits, high humidity, high UV degradation, and acidic exhaust from solid rocket boosters. These assets are constructed from carbon steel, which requires a suitable coating to provide long-term protection to reduce corrosion and its associated costs. While currently used coating systems provide excellent corrosion control performance, they are subject to occupational, safety, and environmental regulations at the Federal and State levels that limit their use. Many contain high volatile organic compounds (VOCs), hazardous air pollutants, and other hazardous materials. Hazardous waste from coating operations include vacuum filters, zinc dust, hazardous paint related material, and solid paint. There are also worker safety issues such as exposure to solvents and isocyanates. To address these issues, top-coated thermal spray zinc coating systems were investigated as a promising environmentally friendly corrosion protection for carbon steel in an acidic launch environment. Additional benefits of the combined coating system include a long service life, cathodic protection to the substrate, no volatile contaminants, and high service temperatures. This paper reports the results of a performance based study to evaluate low VOC topcoats (for thermal spray zinc coatings) on carbon steel for use in a space launch environment.

Strategies to Increase the service life of concrete bridge decks : final report.

DOT National Transportation Integrated Search

2017-03-01

Corrosion of the steel in reinforced concrete bridge decks is a critical issue for structures that are exposed to chloride containing de-icing chemicals or marine salts. Oregon Department of Transportation (ODOT) has a large number of bridges that ar...

The Restructuring of Academia. Essay Review.

ERIC Educational Resources Information Center

Walter, Pierre

2001-01-01

Reviews "The Knowledge Factory" (Aronowitz 2000), "The Corporate Campus" (Turk 2000), "Academic Capitalism" (Slaughter and Leslie 1999), and "The Corrosion of Character" (Sennett 1998). Discuses their depiction of the impact of market forces on higher education; criticizes the neglect of diversity issues in these works. (SK)

CHEMICAL TREATMENT FOR CONTROLLING LEAD IN DRINKING WATER

EPA Science Inventory

Though the pace of research into lead corrosion in the United States has slowed considerably over the past 10 years, there are still several major research discoveries and implementation issues. Experience with the Lead and Copper Rule since its promulgation in 1991 have also un...

An Overview of the Space Shuttle Orbiter's Aging Aircraft Program

NASA Technical Reports Server (NTRS)

Russell, Richard W.

2007-01-01

The Space Shuttle Orbiter has well exceeded its original design life of 10 years or 100 missions. The Orbiter Project Office (OPO) has sponsored several activities to address aging vehicle concerns, including a Corrosion Control Review Board (CCRB), a mid-life certification program, and most recently the formation of the Aging Orbiter Working Group (AOWG). The AOWG was chartered in 2004 as a proactive group which provides the OPO oversight for aging issues such as corrosion, non-destructive inspection, non-metallics, wiring and subsystems. The core team consists of mainly representatives from the Materials and Processes Problem Resolution Team (M&P PRT) and Safety and Mission Assurance (S&MA). Subsystem engineers and subject matter experts are called in as required. The AOWG has functioned by forming issues based sub-teams. Examples of completed sub-teams include adhesives, wiring and wing leading edge metallic materials. Current sub-teams include Composite Over-Wrapped Pressure Vessels (COPV), elastomeric materials and mechanisms.

Key Durability Issues with Mullite-Based Environmental Barrier Coatings for Si-Based Ceramics

NASA Technical Reports Server (NTRS)

Lee, Kang N.

1999-01-01

Plasma-sprayed mullite (3Al2O3 central dot 2SiO2) and mullite/yttria-stabilized-zirconia (YSZ) dual layer coatings have been developed to protect silicon-based ceramics from environmental attack. Mullite-based coating systems show excellent durability in air. However, in combustion environments, corrosive species such as molten salt or water vapor penetrate through cracks in the coating and attack the Si-based ceramics along the interface, Thus modification of the coating system for enhanced crack-resistance is necessary for long-term durability in combustion environments. Other key durability issues include interfacial contamination and coating/substrate bonding. Interfacial contamination leads to enhanced oxidation and interfacial pore formation, while weak coating/substrate bonding leads to rapid attack of the interface by corrosive species, both of which can cause premature failure of the coating. Interfacial contamination can be minimized by limiting impurities in coating and substrate materials. The interface may be modified to improve the coating/substrate bond.

Key Durability Issues with Mullite-Based Environmental Barrier Coatings for Si-Based Ceramics

NASA Technical Reports Server (NTRS)

Lee, Kang N.

2000-01-01

Plasma-sprayed mullite (3Al2O3.2SiO2) and mullite/yttria-stabilized-zirconia (YSZ) dual layer coatings have been developed to protect silicon -based ceramics from environmental attack. Mullite-based coating systems show excellent durability in air. However, in combustion environments, corrosive species such as molten salt or water vapor penetrate through cracks in the coating and attack the Si-based ceramics along the interface. Thus the modification of the coating system for enhanced crack-resistance is necessary for long-term durability in combustion environments. Other key durability issues include interfacial contamination and coating/substrate bonding. Interfacial contamination leads to enhanced oxidation and interfacial pore formation, while a weak coating/substrate bonding leads to rapid attack of the interface by corrosive species, both of which can cause a premature failure of the coating. Interfacial contamination can be minimized by limiting impurities in coating and substrate materials. The interface may be modified to improve the coating/substrate bond.

Research Collaboration in a Communication Rights Campaign: Lessons Learned.

PubMed

Ryan, Charlotte

2018-01-01

In building public support for social change, activists in communities of color routinely approach broader audiences via news media. Communities of color, however, routinely face disparities that limit their access to media including local news media outlets. This lack of access mirrors inequalities in political, social, and economic arenas and can slow public awareness campaigns to address disparities in health, environmental, and other quality-of-life issues. I describe two community-based collaborative action research studies that documented and challenged how local television newscasts underrepresented and misrepresented three communities of color in Boston. The linkage between communication rights and campaigns to address quality-of-life issues is presented, as well as unresolved challenges in the collaborative research process. The study has implications for environmental health campaigns.

Status of thermalhydraulic modelling and assessment: Open issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bestion, D.; Barre, F.

1997-07-01

This paper presents the status of the physical modelling in present codes used for Nuclear Reactor Thermalhydraulics (TRAC, RELAP 5, CATHARE, ATHLET,...) and attempts to list the unresolved or partially resolved issues. First, the capabilities and limitations of present codes are presented. They are mainly known from a synthesis of the assessment calculations performed for both separate effect tests and integral effect tests. It is also interesting to list all the assumptions and simplifications which were made in the establishment of the system of equations and of the constitutive relations. Many of the present limitations are associated to physical situationsmore » where these assumptions are not valid. Then, recommendations are proposed to extend the capabilities of these codes.« less

X-ray fluorescence microscopy artefacts in elemental maps of topologically complex samples: Analytical observations, simulation and a map correction method

NASA Astrophysics Data System (ADS)

Billè, Fulvio; Kourousias, George; Luchinat, Enrico; Kiskinova, Maya; Gianoncelli, Alessandra

2016-08-01

XRF spectroscopy is among the most widely used non-destructive techniques for elemental analysis. Despite the known angular dependence of X-ray fluorescence (XRF), topological artefacts remain an unresolved issue when using X-ray micro- or nano-probes. In this work we investigate the origin of the artefacts in XRF imaging of topologically complex samples, which are unresolved problems in studies of organic matter due to the limited travel distances of low energy XRF emission from the light elements. In particular we mapped Human Embryonic Kidney (HEK293T) cells. The exemplary results with biological samples, obtained with a soft X-ray scanning microscope installed at a synchrotron facility were used for testing a mathematical model based on detector response simulations, and for proposing an artefact correction method based on directional derivatives. Despite the peculiar and specific application, the methodology can be easily extended to hard X-rays and to set-ups with multi-array detector systems when the dimensions of surface reliefs are in the order of the probing beam size.

Uncertainty and dispersion in air parcel trajectories near the tropical tropopause

NASA Astrophysics Data System (ADS)

Bergman, John; Jensen, Eric; Pfister, Leonhard; Bui, Thoapaul

2016-04-01

The Tropical Tropopause Layer (TTL) is important as the gateway to the stratosphere for chemical constituents produced at the Earth's surface. As such, understanding the processes that transport air through the upper tropical troposphere is important for a number of current scientific issues such as the impact of stratospheric water vapor on the global radiative budget and the depletion of ozone by both anthropogenically- and naturally-produced halocarbons. Compared to the lower troposphere, transport in the TTL is relatively unaffected by turbulent motion. Consequently, Lagrangian particle models are thought to provide reasonable estimates of parcel pathways through the TTL. However, there are complications that make trajectory analyses difficult to interpret; uncertainty in the wind data used to drive these calculations and trajectory dispersion being among the most important. These issues are examined using ensembles of backward air parcel trajectories that are initially tightly grouped near the tropical tropopause using three approaches: A Monte Carlo ensemble, in which different members use identical resolved wind fluctuations but different realizations of stochastic, multi-fractal simulations of unresolved winds, perturbed initial location ensembles, in which members use identical resolved wind fields but initial locations are displaced 2° in latitude and longitude, and a multi-model ensemble that uses identical initial conditions but different resolved wind fields and/or trajectory formulations. Comparisons among the approaches distinguish, to some degree, physical dispersion from that due to data uncertainty and the impact of unresolved wind fluctuations from that of resolved variability.

How does disclosing countertransference affect perceptions of the therapist and the session?

PubMed

Yeh, Yun-Jy; Hayes, Jeffrey A

2011-12-01

Therapist self-disclosure has been theorized and found to have both positive and negative effects. These effects depend, in part, on the nature of the disclosure. This study sought to examine the differential effects of therapist disclosures of more and less resolved countertransference issues on perceptions of therapists and therapy sessions. Using an analogue method, undergraduate participants (N = 116) were randomly assigned to watch one of two videos in which a therapist disclosed personal issues that were relatively resolved or relatively unresolved. As hypothesized, therapist disclosure of issues that were more resolved caused the therapist to be rated as more attractive and trustworthy and instilled greater hope than therapist disclosure of less resolved issues. The type of therapist disclosure, however, did not affect ratings of the expertness of the therapist, the depth or smoothness of the session, or the perceived universality between client and therapist. Implications of the results for the judicious use of self-disclosure are discussed.

Current issues relating to psychosocial job strain and cardiovascular disease research.

PubMed

Theorell, T; Karasek, R A

1996-01-01

The authors comment on recent reviews of cardiovascular job strain research by P. L. Schnall and P. A. Landsbergis (1994), and by T. S. Kristensen (1995), which conclude that job strain as defined by the demand-control model (the combination of contributions of low job decision latitudes and high psychological job demands) is confirmed as a risk factor for cardiovascular mortality in a large majority of studies. Lack of social support at work appears to further increase risk. Several still-unresolved research questions are examined in light of recent studies: (a) methodological issues related to use of occupational aggregate estimations and occupational career aggregate assessments, use of standard scales for job analysis and recall bias issues in self-reporting; (b) confounding factors and differential strengths of association by subgroups in job strain-cardiovascular disease analyses with respect to social class, gender, and working hours; and (c) review of results of monitoring job strain-blood pressure associations and associated methodological issues.

Ethical and Clinical Considerations at the Intersection of Functional Neuroimaging and Disorders of Consciousness.

PubMed

Byram, Adrian C; Lee, Grace; Owen, Adrian M; Ribary, Urs; Stoessl, A Jon; Townson, Andrea; Illes, Judy

2016-10-01

Recent neuroimaging research on disorders of consciousness provides direct evidence of covert consciousness otherwise not detected clinically in a subset of severely brain-injured patients. These findings have motivated strategic development of binary communication paradigms, from which researchers interpret voluntary modulations in brain activity to glean information about patients' residual cognitive functions and emotions. The discovery of such responsiveness raises ethical and legal issues concerning the exercise of autonomy and capacity for decisionmaking on matters such as healthcare, involvement in research, and end of life. These advances have generated demands for access to the technology against a complex background of continued scientific advancement, questions about just allocation of healthcare resources, and unresolved legal issues. Interviews with professionals whose work is relevant to patients with disorders of consciousness reveal priorities concerning further basic research, legal and policy issues, and clinical considerations.

Addendum report to atmospheric science facility pallet-only mode space transportation system payload feasibility study, volume 3, revision A

NASA Technical Reports Server (NTRS)

1976-01-01

The feasibility of accomplishing selected atmospheric science mission using a pallet-only mode was studied. Certain unresolved issues were identified. The first issue was that of assuring that the on-board computer facility was adequate to process scientific data, control subsystems such as instrument pointing, provide mission operational program capability, and accomplish display and control. The second issue evolved from an investigation of the availability of existing substitute instruments that could be used instead of the prime instrumentation where the development tests and schedules are incompatible with the realistic budgets and shuttle vehicle schedules. Some effort was expended on identifying candidate substitute instruments, and the performance, cost, and development schedule trade-offs found during that effort were significant enough to warrant a follow-on investigation. This addendum documents the results of that follow-on effort, as it applies to the Atmospheric Sciences Facility.

Patterns of Drug Distribution: Implications and Issues#

PubMed Central

Johnson, Bruce D.

2007-01-01

This article delineates various patterns of illicit sales of drugs, especially at the retail (and near-retail) level, addressing a variety of central issues about drug sales and distribution documented during the past 30 years, including: a) the links between drug consumption and drug distribution activities; b) the various distribution roles; c) various levels of the distribution hierarchy; d) types of retail and wholesale markets; e) the association of drug distribution with nondrug associated criminality and violence. The article also will address the implications of drug distribution: whether various public policies such as supply reduction and source interdiction affect illicit drug markets, and how policing strategies and various law enforcement strategies can influence the involvement of individual participation in drug distribution activities. The overlooked contribution of treatment for “drug abuse” to reducing drug sales and distribution activities also will be considered as will other critical unresolved issues. PMID:14582578

Patterns of drug distribution: implications and issues.

PubMed

Johnson, Bruce D

2003-01-01

This article delineates various patterns of illicit sales of drugs, especially at the retail (and near-retail) level, addressing a variety of central issues about drug sales and distribution documented during the past 30 years. including: a) the links between drug consumption and drug distribution activities; b) the various distribution roles; c) various levels of the distribution hierarchy; d) types of retail and wholesale markets; e) the association of drug distribution with nondrug associated criminality and violence. The article also will address the implications of drug distribution: whether various public policies such as supply reduction and source interdiction affect illicit drug markets, and how policing strategies and various law enforcement strategies can influence the involvement of individual participation in drug distribution activities. The overlooked contribution of treatment for "drug abuse" to reducing drug sales and distribution activities also will be considered as will other critical unresolved issues.

Chronic hyperkalemia in non-dialysis CKD: controversial issues in nephrology practice.

PubMed

De Nicola, Luca; Di Lullo, Luca; Paoletti, Ernesto; Cupisti, Adamasco; Bianchi, Stefano

2018-06-07

Chronic hyperkalemia is a major complication of chronic kidney disease (CKD) that occurs frequently, heralds poor prognosis, and necessitates careful management by the nephrologist. Current strategies aimed at prevention and treatment of hyperkalemia are still suboptimal, as evidenced by the relatively high prevalence of hyperkalemia in patients under stable nephrology care, and even in the ideal setting of randomized trials where best treatment and monitoring are mandatory. The aim of this review was to identify and discuss a range of unresolved issues related to the management of chronic hyperkalemia in non-dialysis CKD. The following topics of clinical interest were addressed: diagnosis, relationship with main comorbidities of CKD, therapy with inhibitors of the renin-angiotensin-aldosterone system, efficacy of current dietary and pharmacological treatment, and the potential role of the new generation of potassium binders. Opinion-based answers are provided for each of these controversial issues.

Intelligent transportation systems assessment of ITS deployment : review of metropolitan areas : dscussions of crosscutting issues

DOT National Transportation Integrated Search

2000-08-01

The study on which this report is based sought to compile data on both accelerated and natural exposure of coating and corrosion test panels and then to relate their deterioration to environmental conditions. The report presents data gathered over a ...

Identification and characterization of steady and occluded water in drinking water distribution systems.

PubMed

Tong, Huiyan; Zhao, Peng; Zhang, Hongwei; Tian, Yimei; Chen, Xi; Zhao, Weigao; Li, Mei

2015-01-01

Deterioration and leakage of drinking water in distribution systems have been a major issue in the water industry for years, which are associated with corrosion. This paper discovers that occluded water in the scales of the pipes has an acidic environment and high concentration of iron, manganese, chloride, sulfate and nitrate, which aggravates many pipeline leakage accidents. Six types of water samples have been analyzed under the flowing and stagnant periods. Both the water in the exterior of the tubercles and stagnant water carry suspended iron particles, which explains the occurrence of "red water" when the system hydraulic conditions change. Nitrate is more concentrated in occluded water under flowing condition in comparison with that in flowing water. However, the concentration of nitrate in occluded water under stagnant condition is found to be less than that in stagnant water. A high concentration of manganese is found to exist in steady water, occluded water and stagnant water. These findings impact secondary pollution and the corrosion of pipes and containers used in drinking water distribution systems. The unique method that taking occluded water from tiny holes which were drilled from the pipes' exteriors carefully according to the positions of corrosion scales has an important contribution to research on corrosion in distribution systems. And this paper furthers our understanding and contributes to the growing body of knowledge regarding occluded environments in corrosion scales. Copyright © 2014 Elsevier Ltd. All rights reserved.

Effects of external stress on biodegradable orthopedic materials: A review.

PubMed

Li, Xuan; Chu, Chenglin; Chu, Paul K

2016-09-01

Biodegradable orthopedic materials (BOMs) are used in rehabilitation and reconstruction of fractured tissues. The response of BOMs to the combined action of physiological stress and corrosion is an important issue in vivo since stress-assisted degradation and cracking are common. Although the degradation behavior and kinetics of BOMs have been investigated under static conditions, stress effects can be very serious and even fatal in the dynamic physiological environment. Since stress is unavoidable in biomedical applications of BOMs, recent work has focused on the evaluation and prediction of the properties of BOMs under stress in corrosive media. This article reviews recent progress in this important area focusing on biodegradable metals, polymers, and ceramics.

Manufacturing and operational issues with lead-acid batteries

NASA Astrophysics Data System (ADS)

Rand, D. A. J.; Boden, D. P.; Lakshmi, C. S.; Nelson, R. F.; Prengaman, R. D.

An expert panel replies to questions on lead-acid technology and performance asked by delegates to the Ninth Asian Battery Conference. The subjects are as follows. Grid alloys: effects of calcium and tin levels on microstructure, corrosion, mechanical and electrochemical properties; effect of alloy-fabrication process on mechanical strength and corrosion resistance; low dross-make during casting of lead-calcium-tin alloys; future of book-mould casting; effect of increasing levels of silver; stability of continuously processed grids at high temperature. Negative-plate expanders: function of lignosulfonates and barium sulfate; benefits of pre-blended expanders; optimum expander formulations. Valve-regulated batteries: effect of oxygen cycle; optimum methods for float charging; charging and deep-cycle lifetimes; reliability testing.

77 FR 32887 - Airworthiness Directives; Burkhart GROB Luft- und Raumfahrt GmbH Powered Sailplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-04

... Airworthiness Directives; Burkhart GROB Luft- und Raumfahrt GmbH Powered Sailplanes AGENCY: Federal Aviation... seaside and therefore exposed to a salty environment, causing the excessive corrosion. This condition, if... Programs,'' describes in more detail the scope of the Agency's authority. We are issuing this rulemaking...

78 FR 51055 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-20

... a report of corrosion of the components of the main landing gear (MLG) retraction actuator found in... related pins. This AD requires inspection of the MLG retraction actuator components; corrective actions if necessary; and, for certain retraction actuators, installation of a new jam nut. We are issuing this AD to...

77 FR 56993 - Airworthiness Directives; Piper Aircraft, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... for related issues on the stabilator control system. For the attached torque tube, Piper Aircraft, Inc.../document.information/documentID/99861 ; and AC 43-4A, Corrosion Control for Aircraft, at http:// rgl.faa... (assembly P/N 20399) installed. (d) Subject Joint Aircraft System Component (JASC)/Air Transport Association...

From Unresolved Anger to Sadness: Identifying Physiological Correlates

ERIC Educational Resources Information Center

Rochman, Daniel; Diamond, Gary M.

2008-01-01

This study was designed to identify physiological correlates of unresolved anger and sadness, and the shift between these emotions, in a context similar to that of emotion-focused, experiential psychotherapy. Twenty-seven university students reporting unresolved anger toward an attachment figure were induced to experience and express unresolved…

A Structural Approach to Unresolved Mourning in Single Parent Family Systems.

ERIC Educational Resources Information Center

Fulmer, Richard H.

1983-01-01

Considers the mother's depression as a special problem in therapy of single-parent families, resulting from unresolved mourning maintained by the family system. Offers reasons why the single-parent family's structure seems inherently vulnerable to unresolved mourning. Suggests techniques of Structural Family Therapy to facilitate mourning in such…

In vitro degradation of pure Mg in response to glucose

NASA Astrophysics Data System (ADS)

Zeng, Rong-Chang; Li, Xiao-Ting; Li, Shuo-Qi; Zhang, Fen; Han, En-Hou

2015-08-01

Magnesium and its alloys are promising biodegradable biomaterials but are still challenging to be used in person with high levels of blood glucose or diabetes. To date, the influence of glucose on magnesium degradation has not yet been elucidated, this issue requires more attention. Herein, we present pure Mg exhibiting different corrosion responses to saline and Hank’s solutions with different glucose contents, and the degradation mechanism of pure Mg in the saline solution with glucose in comparison with mannitol as a control. On one hand, the corrosion rate of pure Mg increases with the glucose concentration in saline solutions. Glucose rapidly transforms into gluconic acid, which attacks the oxides of the metal and decreases the pH of the solution; it also promotes the absorption of chloride ions on the Mg surface and consequently accelerates corrosion. On the other hand, better corrosion resistance is obtained with increasing glucose content in Hank’s solution due to the fact that glucose coordinates Ca2+ ions in Hank’s solution and thus improves the formation of Ca-P compounds on the pure Mg surface. This finding will open up new avenues for research on the biodegradation of bio-Mg materials in general, which could yield many new and interesting results.

In vitro degradation of pure Mg in response to glucose

PubMed Central

Zeng, Rong-Chang; Li, Xiao-Ting; Li, Shuo-Qi; Zhang, Fen; Han, En-Hou

2015-01-01

Magnesium and its alloys are promising biodegradable biomaterials but are still challenging to be used in person with high levels of blood glucose or diabetes. To date, the influence of glucose on magnesium degradation has not yet been elucidated, this issue requires more attention. Herein, we present pure Mg exhibiting different corrosion responses to saline and Hank’s solutions with different glucose contents, and the degradation mechanism of pure Mg in the saline solution with glucose in comparison with mannitol as a control. On one hand, the corrosion rate of pure Mg increases with the glucose concentration in saline solutions. Glucose rapidly transforms into gluconic acid, which attacks the oxides of the metal and decreases the pH of the solution; it also promotes the absorption of chloride ions on the Mg surface and consequently accelerates corrosion. On the other hand, better corrosion resistance is obtained with increasing glucose content in Hank’s solution due to the fact that glucose coordinates Ca2+ ions in Hank’s solution and thus improves the formation of Ca-P compounds on the pure Mg surface. This finding will open up new avenues for research on the biodegradation of bio-Mg materials in general, which could yield many new and interesting results. PMID:26264413

Alternatives to animal testing: research, trends, validation, regulatory acceptance.

PubMed

Huggins, Jane

2003-01-01

Current trends and issues in the development of alternatives to the use of animals in biomedical experimentation are discussed in this position paper. Eight topics are considered and include refinement of acute toxicity assays; eye corrosion/irritation alternatives; skin corrosion/irritation alternatives; contact sensitization alternatives; developmental/reproductive testing alternatives; genetic engineering (transgenic) assays; toxicogenomics; and validation of alternative methods. The discussion of refinement of acute toxicity assays is focused primarily on developments with regard to reduction of the number of animals used in the LD(50) assay. However, the substitution of humane endpoints such as clinical signs of toxicity for lethality in these assays is also evaluated. Alternative assays for eye corrosion/irritation as well as those for skin corrosion/irritation are described with particular attention paid to the outcomes, both successful and unsuccessful, of several validation efforts. Alternative assays for contact sensitization and developmental/reproductive toxicity are presented as examples of methods designed for the examination of interactions between toxins and somewhat more complex physiological systems. Moreover, genetic engineering and toxicogenomics are discussed with an eye toward the future of biological experimentation in general. The implications of gene manipulation for research animals, specifically, are also examined. Finally, validation methods are investigated as to their effectiveness, or lack thereof, and suggestions for their standardization and improvement, as well as implementation are reviewed.

Cause and cure for high volatile coal and corrosive gases at TXI, Midlothian Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shahid, A.; Bottelberghe, B.; Crowther, J.

2007-07-01

The plant has raw materials which are high in pyritic sulfur. The coal mill uses the preheater exhaust gases, which have elevated amounts of SO{sub 2}. The coal being used is highly volatile. Therefore the coal mill bag filter had few occurrences of smoldered bags causing potentially unsafe conditions. This problem was solved by implementing some operational changes like reducing the mill exit temperature based on dewatering curve of coal and making the system more inert. To achieve this water had to be added into the system. When the mill exit temperature was reduced, the operating temperatures were below themore » sulfuric and hydrochloric acid dew points. Because of this corrosive acid stream in the gas flow, the bag filter started corroding. En route to solving these issues, the plant neutralized the acid by adding the raw meal dust and changing the bag filter into a stainless steel construction. Furthermore, the requirement to spray water in the system was removed by adding a heat exchanger to the coal mill inlet. Also, there were some design changes made to the coal mill bag filter, which helped in stable operation and extended bag life in the bag filter. This paper discusses these issues and how these problems were solved. This paper would be of beneficial use for other plants, which have to deal with high volatile coal and highly corrosive gases.« less

What do consumer surveys and experiments reveal and conceal about consumer preferences for genetically modified foods?

PubMed

Colson, Gregory; Rousu, Matthew C

2013-01-01

Assessing consumer perceptions and willingness to pay for genetically modified (GM) foods has been one of the most active areas of empirical research in agricultural economics. Researchers over the past 15 years have delivered well over 100 estimates of consumers' willingness to pay for GM foods using surveys and experimental methods. In this review, we explore a number of unresolved issues related to three questions that are critical when considering the sum of the individual contributions that constitute the evidence on consumer preferences for GM foods.

The ethics of human gene transfer.

PubMed

Kimmelman, Jonathan

2008-03-01

Almost 20 years since the first gene-transfer trial was carried out in humans, the field has made significant advances towards clinical application. Nevertheless, it continues to face numerous unresolved ethical challenges--among them are the question of when to initiate human testing, the acceptability of germline modification and whether the technique should be applied to the enhancement of traits. Although such issues have precedents in other medical contexts, they take on a different character in gene transfer, in part because of the scientific uncertainty and the social context of innovation.

The Most Critical Unresolved Issues Associated with Race, Ethnicity, Culture, and Substance Use

PubMed Central

Unger, Jennifer B.

2015-01-01

This paper discusses the limitations of previous research on race, ethnicity, culture, and substance use. The study offers the following recommendations for future research in this area: (1) move beyond simple comparisons of mutually exclusive groups, (2) focus on the meaning of an ethnic label to the individual, (3) consider the complex interactions between an individual’s cultural identity and the cultural context, (4) understand and acknowledge the researcher’s inherent biases, and (5) translate research findings into practice and policy change. PMID:22217334

Patchwork plagiarism--a jigsaw of stolen puzzle pieces.

PubMed

Supak Smolcić, Vesna; Bilić-Zulle, Lidija

2013-01-01

Plagiarism remains at the top in terms of interest to the scientific community. In its many vicious forms, patchwork plagiarism is characterized by numerous unresolved issues and often passes "below the radar" of editors and reviewers. The problem of detecting the complexity of misconduct has been partially resolved by plagiarism detection software. However, interpretation of relevant reports is not always obvious or easy. This article deals with plagiarism in general and patchwork plagiarism in particular, as well as related problems that editors must deal with to maintain the integrity of scientific journals.

Archetype and object: primary deintegration and primary love in analytical play therapy with young children.

PubMed

Peery, J Craig

2002-07-01

Jungian and post-Jungian theory of the development of the child's psyche is reviewed. A discrimination between primary and secondary deintegration is suggested. Post-Freudian theory regarding primary object relations is integrated with the Jungian model. The two approaches can contribute synergistically to inform and advance play therapy with young children. Patients from widely diverse cultural backgrounds use their relationship with the therapist as a helpful person (object), and engage in archetypal material from the collective unconscious, to help them work on and through their unresolved emotional issues.

[Transanal total mesorectal excision for rectal cancer - just a fashion trend?].

PubMed

Kala, Z; Skrovina, M; Procházka, V; Grolich, T; Klos, K

2014-12-01

Transanal total mesorectal excision performed using equipment for transanal minimally invasive surgery is an innovative surgical technique introduced to facilitate this procedure and to reach better oncosurgical outcomes in patients with low rectal cancer. This article presents a brief summary of guidelines for treatment of patients with low rectal carcinoma. Up-to-date information about the principles of this new method, its modifications and contemporary indications is presented. Based on their own experience and literature resources, the authors inform about the advantages, limitations and unresolved issues of minimally invasive transanal mesorectal excision.

The pulmonary physician in critical care * 4: Nosocomial pneumonia.

PubMed

Ewig, S; Bauer, T; Torres, A

2002-04-01

Much progress has been made in the understanding of nosocomial pneumonia but important issues in diagnosis and treatment remain unresolved. The controversy over diagnostic tools should be closed. Instead, every effort should be made to increase our ability to make valid clinical predictions about the presence of ventilator associated pneumonia and to establish criteria to guide restricting empirical antimicrobial treatment without causing patient harm. More emphasis must be put on local infection control measures such as routine surveillance of pathogens, definition of controlled policies of antimicrobial treatment, and effective implementation of strategies of prevention.

Analyses of group sequential clinical trials.

PubMed

Koepcke, W

1989-12-01

In the first part of this article the methodology of group sequential plans is reviewed. After introducing the basic definition of such plans the main properties are shown. At the end of this section three different plans (Pocock, O'Brien-Fleming, Koepcke) are compared. In the second part of the article some unresolved issues and recent developments in the application of group sequential methods to long-term controlled clinical trials are discussed. These include deviation from the assumptions, life table methods, multiple-arm clinical trials, multiple outcome measures, and confidence intervals.

Change in attachment states of mind of women with binge-eating disorder.

PubMed

Maxwell, Hilary; Tasca, Giorgio A; Grenon, Renee; Ritchie, Kerri; Bissada, Hany; Balfour, Louise

2017-11-01

Insecure and unresolved/disorganized attachment states of mind may impact affect regulation and interpersonal functioning that contribute to binge eating in women with binge-eating disorder (BED). Group psychological treatment may facilitate changes from insecure to secure and from unresolved-disorganized to non-unresolved/disorganized attachment states of mind. This study used attachment theory to understand better the psychopathology of BED and co-morbid overweight status and to understand better the treatment response of patients with BED who receive group psychotherapy. Women with BED attended group psychodynamic interpersonal psychotherapy and completed the Adult Attachment Interview pretreatment and 6 months posttreatment. Matched samples of overweight women without BED and normal-weight women without BED completed the Adult Attachment Interview at 1 time point. Women with BED had significantly higher rates of preoccupied and unresolved/disorganized attachment states of mind compared to normal-weight women without BED and had similar rates of insecure and unresolved/disorganized attachment states of mind compared to overweight women without BED. Of the women with BED who had an insecure and/or unresolved/disorganized attachment states of mind at pretreatment, about 60% demonstrated clinically relevant changes to secure and to non-unresolved/disorganized states of mind at 6 months post group psychodynamic interpersonal psychotherapy. Results indicated that some women with BED may benefit from interventions that help them regulate hyperactivated affect and create coherent narratives. Both women with BED and overweight women without BED may benefit from treatments that help them develop more adaptive affect regulation strategies related to unresolved/disorganized attachment states of mind. Copyright © 2017 John Wiley & Sons, Ltd.

77 FR 42788 - Self-Regulatory Organizations; New York Stock Exchange LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... Unresolved Account Balances in the Exchange's Online Comparison System July 16, 2012. Pursuant to Section 19... assigning the contra party to unresolved account balances in the Exchange's Online Comparison System. The... maker (``DMM'') unit as the contra party for any unresolved omnibus account balances in the Exchange's...

Neurocysticercosis: Diagnostic problems & current therapeutic strategies

PubMed Central

Rajshekhar, Vedantam

2016-01-01

Neurocysticercosis (NCC) is the most common single cause of seizures/epilepsy in India and several other endemic countries throughout the world. It is also the most common parasitic disease of the brain caused by the cestode Taenia solium or pork tapeworm. The diagnosis of NCC and the tapeworm carrier (taeniasis) can be relatively inaccessible and expensive for most of the patients. In spite of the introduction of several new immunological tests, neuroimaging remains the main diagnostic test for NCC. The treatment of NCC is also mired in controversy although, there is emerging evidence that albendazole (a cysticidal drug) may be beneficial for patients by reducing the number of seizures and hastening the resolution of live cysts. Currently, there are several diagnostic and management issues which remain unresolved. This review will highlight some of these issues. PMID:28139530

How couples manage interracial and intercultural differences: implications for clinical practice.

PubMed

Seshadri, Gita; Knudson-Martin, Carmen

2013-01-01

This study focused on how couples managed their interracial and intercultural differences. To understand their experiences, a qualitative grounded theory analysis was used (n=17). Analysis revealed that couples experienced most issues as cultural issues; race only occurred during their interactions with "others." They appeared to organize their responses according to four relationship structures: Integrated, Singularly Assimilated, Coexisting, and Unresolved. Couples in each of these structures managed daily process through four sets of relationship strategies: (a) creating a "we," (b) framing differences, (c) emotional maintenance, and (d) positioning in relationship to familial and societal context. These findings are a step toward a strength-based and research-informed education and clinical interventions for this population. Video Abstract. © 2012 American Association for Marriage and Family Therapy.

The patient who believes and the analyst who does not (1).

PubMed

Lijtmaer, Ruth M

2009-01-01

A patient's religious beliefs and practices challenge the clinical experience and self-knowledge of the analyst owing to a great complexity of factors, and often take the form of the analyst's resistances and countertransference reactions to spiritual and religious issues. The analyst's feelings about the patient's encounters with religion and other forms of healing experiences may result in impasses and communication breakdown for a variety of reasons. These reasons include the analyst's own unresolved issues around her role as a psychoanalyst-which incorporates in some way psychoanalysis's views of religious belief-and these old conflicts may be irritated by the religious themes expressed by the patient. Vignettes from the treatments of two patients provide examples of the analyst's countertransference conflicts, particularly envy in the case of a therapist who is an atheist.

Status, sale and patenting of human genetic material: an international survey.

PubMed

Knoppers, B M

1999-05-01

Following a decade of debate, the European Directive on the Legal Protection of Biotechnological Inventions was adopted by the European Parliament and the Council of the European Union on July 6, 1998. The Directive constitutes a legal and social policy landmark in biotechnology, taking an explicit position on the contentious issue of the patentability of higher life forms. It fails, however, to provide definitive statements on the legal status of human genetic material or the possibility of personal financial gain in relation to such material. An overview of the international, regional and national positions (as found in laws and official policy statements) on the status, commodification and patentability of human genetic material indicates that, although the Directive represents a consolidation of opinions, many issues remain unresolved.

[Empowerment and health promotion programming].

PubMed

Laverack, G

2008-12-01

Health promotion often presents a tension between "bottom up" and "top down" programming. "Bottom-up" is associated with community empowerment and begins on issues of concern to particular groups or individuals and regards an increase in overall control as an important element of the health outcome. "Top-down" is associated with disease prevention efforts and begins by seeking to involve beneficiaries on issues defined by health agencies. It regards improvements in health behaviours or bio-medical indicators as the important outcome and community empowerment is viewed simply as a means to the end of health behaviour change. The tension between these two approaches is not unresolvable, and this article presents a framework, the "parallel-track", intended to assist health promotion practitioners to systematically accommodate community empowerment goals within "top-down" health programming.

Perception of the pitch of unresolved harmonics by 3- and 7-month-old human infants.

PubMed

Lau, Bonnie K; Werner, Lynne A

2014-08-01

Three-month-olds discriminate resolved harmonic complexes on the basis of missing fundamental (MF) pitch. In view of reported difficulty in discriminating unresolved complexes at 7 months and striking changes in the organization of the auditory system during early infancy, infants' ability to discriminate unresolved complexes is of some interest. This study investigated the ability of 3-month-olds, 7-month-olds, and adults to discriminate the pitch of unresolved harmonic complexes using an observer-based method. Stimuli were MF complexes bandpass filtered with a -12 dB/octave slope, combined in random phase, presented at 70 dB sound pressure level (SPL) for 650 ms with a 50 ms rise/fall with a pink noise at 65 dB SPL. The conditions were (1) "LOW" unresolved harmonics (2500-4500 Hz) based on MFs of 160 and 200 Hz and (2) "HIGH" unresolved harmonics (4000-6000 Hz) based on MFs of 190 and 200 Hz. To demonstrate MF discrimination, participants had to ignore spectral changes in complexes with the same fundamental and respond only when the fundamental changed. Nearly all infants tested categorized complexes by MF pitch suggesting discrimination of pitch extracted from unresolved harmonics by 3 months. Adults also categorized the complexes by MF pitch, although musically trained adults were more successful than musically untrained adults.

Comparative study on lithium borates as corrosion inhibitors of aluminum current collector in lithium bis(fluorosulfonyl)imide electrolytes

NASA Astrophysics Data System (ADS)

Park, Kisung; Yu, Sunghun; Lee, Chulhaeng; Lee, Hochun

2015-11-01

Lithium bis(fluorosulfonyl)imide (LiFSI) is a promising salt that can possibly overcome the limitations of lithium hexafluorophosphate (LiPF6) in current Li-ion batteries (LIBs). Aluminum (Al) corrosion issue, however, is a major bottleneck for the wide use of LiFSI. This study investigates lithium borate salts as Al corrosion inhibitors in LiFSI electrolytes. Through a systematic comparison among lithium tetrafluoroborate (LiBF4), lithium bis(oxalato)borate (LiBOB), and lithium difluoro(oxalato)borate (LiDFOB), and LiPF6, the inhibition ability of the additives is revealed to be in the following order: LiDFOB > LiBF4 ≈ LiPF6 > LiBOB. In particular, the inhibition effect of LiDFOB is outstanding; the anodic behavior of Al in 0.8 M LiFSI + 0.2 M LiDFOB ethylene carbonate (EC)-based electrolyte is comparable to that of corrosion-free 1 M LiPF6 solution. The superior inhibition ability of LiDFOB is attributed to the formation of a passive layer composed of Al-F, Al2O3, and B-O species, as evidenced by X-ray photoelectron spectroscopy (XPS) measurements. A LiCoO2/graphite cell with 0.8 M LiFSI + 0.2 M LiDFOB electrolyte exhibits a rate capability comparable to a cell with 1 M LiPF6 solution, whereas a cell with 0.8 M LiFSI solution without LiDFOB suffers from poor power performance resulting from severe Al corrosion.

78 FR 46301 - Airworthiness Directives; BAE Systems (Operations) Limited Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-31

... of a cracked pick- up bracket of the forward outboard pylon of the number 1 engine due to stress... 3 attachment bolt holes. Subsequent investigation revealed that the cause of cracking was stress... bracket of the forward outboard pylon of the number 1 engine due to stress corrosion. We are issuing this...

77 FR 28238 - Airworthiness Directives; Airbus Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

... adaptor and the wing skin. This AD requires performing an electrical bonding test between the gravity fill re-fuel adaptor and the top skin panels on the left-hand and right-hand wings, and if necessary... repairing the gravity fuel adaptor if any corrosion is found. We are issuing this AD to detect and correct...

77 FR 32064 - Airworthiness Directives; The Boeing Company Model 747 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-31

... fittings for corrosion, and rework if necessary; and ultrasonic inspections for cracks of the outboard end fittings of the WLG support beams, and rework if necessary. Since we issued that AD, there have been new... found after the effective date of this proposed AD, rework is required before further flight. We have...

Mind and Inferiority: Reflections on "English" as a University Discipline in a Black Context.

ERIC Educational Resources Information Center

Aitken, Richard

1987-01-01

The social/political issues facing university English departments in South Africa include problems of identity and definition, the need for instruction within the context of social and political history, the problems of cultural relativism, the corrosive implications of Black subordination, and the complex alternatives of private and public…

SCANNING ELECTRON ANALYSIS OF IRON FILINGS FROM A ZERO-VALENT IRON PERMEABLE BARRIER USED FOR GROUND WATER RESTORATION

EPA Science Inventory

Permeable iron reactive barriers have become a popular way to remediate contaminated ground water. Although this technology has been in use for about a decade, there is still little knowledge about long-term performance issues (l). One of the biggest concerns is the corrosion of ...

Colorimetric Detection of Water Vapor Using Metal-Organic Framework Composites.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allendorf, Mark D.

Purpose: Water vapor trapped in encapsulation materials or enclosed volumes leads to corrosion issues for critical NW components. Sandia National Laboratories has created a new diagnostic to indicate the presence of water in weapon systems. Impact: Component exposure to water now can be determined instantly, without need for costly, time-consuming analytical methods.

U.S. EPA Lead and Copper Corrosion Research Program Update

EPA Science Inventory

The Lead and Copper Rule was established to reduce lead and copper in consumer’s tap water. As a result a great deal of work has been conducted by U.S. EPA researchers, and others, in support of the Rule. Despite that work, there are still needs and related issues that are not ...

78 FR 27867 - Airworthiness Directives; MD Helicopters Inc. Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... the retirement life of each tail rotor blade (blade), performing a one-time visual inspection of each... information to the FAA within 24 hours following the one-time inspection. Since we issued that AD, an accident... shot peen surface's condition in addition to cracks and corrosion, and would add certain part-numbered...

76 FR 54209 - Corrosion-Resistant Carbon Steel Flat Products From the Republic of Korea: Preliminary Results of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-31

... description of the merchandise is dispositive. Subsidies Valuation Information A. Benchmarks for Short-Term Financing For those programs requiring the application of a won-denominated, short-term interest rate... Issues and Decision Memorandum (CORE from Korea 2006 Decision Memorandum) at ``Benchmarks for Short-Term...

78 FR 33197 - Airworthiness Directives; Iniziative Industriali Italiane S.p.A. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-04

... plane hinge assembly. We are issuing this AD to require actions to address the unsafe condition on these... plane hinge assembly have been reported. This condition, if not detected and corrected, could lead to... bearing and the horizontal tail/elevator plane hinge assembly to detect any crack, signs of corrosion or...

Components of the Extragalactic Gamma-Ray Background

NASA Technical Reports Server (NTRS)

Stecker, Floyd W.; Venters, Tonia M.

2011-01-01

We present new theoretical estimates of the relative contributions of unresolved blazars and star-forming galaxies to the extragalactic gamma-ray background (EGB) and discuss constraints on the contributions from alternative mechanisms such as dark matter annihilation and truly diffuse gamma-ray production. We find that the Fermi source count data do not rule out a scenario in which the EGB is dominated by emission from unresolved blazars, though unresolved star-forming galaxies may also contribute significantly to the background, within order-of-magnitude uncertainties. In addition, we find that the spectrum of the unresolved star-forming galaxy contribution cannot explain the EGB spectrum found by EGRET at energies between 50 and 200 MeV, whereas the spectrum of unresolved flat spectrum radio quasars, when accounting for the energy-dependent effects of source confusion, could be consistent with the combined spectrum of the low-energy EGRET EGB measurements and the Fermi-Large Area Telescope EGB measurements.

Initial stage corrosion of nanocrystalline copper particles and thin films

NASA Astrophysics Data System (ADS)

Tao, Weimin

1997-12-01

Corrosion behavior is an important issue in nanocrystalline materials research and development. A very fine grain size is expected to have significant effects on the corrosion resistance of these novel materials. However, both the macroscopic corrosion properties and the corresponding structure evolution during corrosion have not been fully studied. Under such circumstances, conducting fundamental research in this area is important and necessary. In this study, high purity nanocrystalline and coarse-grained copper were selected as our sample material, sodium nitrite aqueous solution at room temperature and air at a high temperature were employed as corrosive environments. The weight loss testing and electrochemical methods were used to obtain the macroscopic corrosion properties, whereas the high resolution transmission electron microscope was employed for the structure analysis. The weight loss tests indicate that the corrosion rate of nanocrystalline copper is about 5 times higher than that of coarse-grained copper at the initial stage of corrosion. The electrochemical measurements show that the corrosion potential of the nanocrystalline copper has a 230 mV negative shift in comparison with that of the coarse-grained copper. The nanocrystalline copper also exhibits a significantly higher exchange current density than the coarse-grained copper. High resolution TEM revealed that the surface structure changes at the initial stage of corrosion. It was found that the first copper oxide layer formed on the surface of nanocrystalline copper thin film contains a large density of high angle grain boundaries, whereas that formed on the surface of coarse-grained copper shows highly oriented oxide nuclei and appears to show a strong tendency for forming low angle grain boundaries. A correlation between the macroscopic corrosion properties and the structure characteristics is proposed for the nanocrystalline copper based on the concept of the "apparent" exchange current density associated with mass transport of ions in the oxide layer. A hypothesis is developed that the high corrosion rate of the nanocrystalline copper is closely associated with the structure of the copper oxide layer. Therefore, a high "apparent" exchange current density for the nanocrystalline copper is associated with the high angle grain boundary structure in the initial oxide layer. Additional structure analysis was also carried out: (a) High resolution TEM imaging has provided a cross sectional view of the epitaxial interface between nanocrystalline copper and copper (I) oxide and explicitly discloses the presence of interface defects such as misfit dislocations. Based on this observation, a mechanism was proposed to explain the Cu/Cusb2O interface misfit accommodation. This appears to be the first time this interface has been directly examined. (b) A nanocrystalline analogue to a cross-section of Gwathmey's copper single crystal sphere was revealed by high resolution TEM imaging. A partially oxidized nanocrystalline copper particle is used to examine the variation of the Cu/Cusb2O orientation relationship with respect to changes in surface orientation. A new orientation relationship, Cu (011) //Cusb2O (11), ˜ Cu(011)//Cusb2O(111), was found for the oxidation of nanocrystalline copper.

In-pile Hydrothermal Corrosion Evaluation of Coated SiC Ceramics and Composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, David; Ang, Caen; Katoh, Yutai

2017-09-01

Hydrothermal corrosion accelerated by water radiolysis during normal operation is among the most critical technical feasibility issues remaining for silicon carbide (SiC) composite-based cladding that could provide enhanced accident-tolerance fuel technology for light water reactors. An integrated in-pile test was developed and performed to determine the synergistic effects of neutron irradiation, radiolysis, and pressurized water flow, all of which are relevant to a typical pressurized water reactor (PWR). The test specimens were chosen to cover a range of SiC materials and a variety of potential options for environmental barrier coatings. This document provides a summary of the irradiation vehicle design,more » operations of the experiment, and the specimen loading into the irradiation vehicle.« less

Inspection of aging aircraft: A manufacturer's perspective

NASA Technical Reports Server (NTRS)

Hagemaier, Donald J.

1992-01-01

Douglas, in conjunction with operators and regulators, has established interrelated programs to identify and address issues regarding inspection of aging aircraft. These inspection programs consist of the following: Supplemental Inspection Documents; Corrosion Prevention and Control Documents; Repair Assessment Documents; and Service Bulletin Compliance Documents. In addition, airframe manufacturers perform extended airframe fatigue tests to deal with potential problems before they can develop in the fleet. Lastly, nondestructive inspection (NDI) plays a role in all these programs through the detection of cracks, corrosion, and disbonds. However, improved and more cost effective NDI methods are needed. Some methods such as magneto-optic imaging, electronic shearography, Diffractor-Sight, and multi-parameter eddy current testing appear viable for near-term improvements in NDI of aging aircraft.

Comparing the incomparable? A systematic review of competing techniques for converting descriptive measures of health status into QALY-weights.

PubMed

Mortimer, Duncan; Segal, Leonie

2008-01-01

Algorithms for converting descriptive measures of health status into quality-adjusted life year (QALY)--weights are now widely available, and their application in economic evaluation is increasingly commonplace. The objective of this study is to describe and compare existing conversion algorithms and to highlight issues bearing on the derivation and interpretation of the QALY-weights so obtained. Systematic review of algorithms for converting descriptive measures of health status into QALY-weights. The review identified a substantial body of literature comprising 46 derivation studies and 16 studies that provided evidence or commentary on the validity of conversion algorithms. Conversion algorithms were derived using 1 of 4 techniques: 1) transfer to utility regression, 2) response mapping, 3) effect size translation, and 4) "revaluing" outcome measures using preference-based scaling techniques. Although these techniques differ in their methodological/theoretical tradition, data requirements, and ease of derivation and application, the available evidence suggests that the sensitivity and validity of derived QALY-weights may be more dependent on the coverage and sensitivity of measures and the disease area/patient group under evaluation than on the technique used in derivation. Despite the recent proliferation of conversion algorithms, a number of questions bearing on the derivation and interpretation of derived QALY-weights remain unresolved. These unresolved issues suggest directions for future research in this area. In the meantime, analysts seeking guidance in selecting derived QALY-weights should consider the validity and feasibility of each conversion algorithm in the disease area and patient group under evaluation rather than restricting their choice to weights from a particular derivation technique.

Effects of Laser Etching on the Corrosion Susceptibility of SAVY 4000 and Hagan Containers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hyer, Holden Christopher; Duque, Juan; Smith, Paul Herrick

Since the late 1990’s, the Hagan container was used as the primary container for packaging of plutonium-bearing materials. The Hagan design consisted of a threaded closure, a Viton® ORing, a carbon-carbon filter, and a 304L stainless steel (SS) body. Over the years, Hagans have shown vulnerability in their design [1]. In 2008, The Department of Energy (DOE) issued DOE M 441.1-1, Nuclear Material Packaging Manual, which detailed an approach to obtain highconfidence in containers by including specific design requirements, material contents and an approach to determine life span from said contents, and surveillance techniques [2]. In response to both themore » vulnerability issues with the Hagan and DOE M 441.1-1, the SAVY 4000 container with its twist style closure, Viton® O-Ring, Fiberfrax-Gortex filter, and annealed 316L SS body, was designed as the replacement for Hagan containers, but only for a short term lifespan of 5 years [1]. However, both the Hagan and SAVY 4000 are being pushed to maintain a lifespan of 40 years. Therefore, proper confidence must be placed on each component of each container to last a minimum of 40 years. So far, the biggest concern found during surveillance of these containers is corrosion and the potential for failure by corrosion. One concern is that the containers fail due to stress corrosion cracking (SCC), especially around the weld between the collar and the body as welds leave residual stresses. One advantage the SAVY 4000 has is that the body is annealed, but its weld is still susceptible as it was welded after annealing [3, 4]. Moreover, 316L SS is known to have a higher pitting resistance (pits are a precursor to SCC and can also lead to extensive failure of the material), than 304L SS [4]. During recent surveillance activities, two SAVY 4000’s containing Solution Assay Instrument (SAI) solutions were opened. The SAI SAVY 4000’s contained plutonium (Pu) in 3M HCl solution in plastic volumetric flasks placed inside of polyethylene bags. Historically, a SAVY 4000 containing an SAI solution is packaged for 3 weeks, however, these particular containers were not reopened until 14 months later. When opened, brown-red corrosion product was found all over the inside of the container as shown in Figure 1.« less

Global-scale Ionospheric Outflow: Major Processes and Unresolved Problems

NASA Astrophysics Data System (ADS)

Liemohn, M. W.; Welling, D. T.; Ilie, R.; Khazanov, G. V.; Jahn, J. M.; Zou, S.; Ganushkina, N. Y.; Valek, P. W.; Elliott, H. A.; Gilchrist, B. E.; Hoegy, W. R.; Glocer, A.

2016-12-01

Outflow from the ionosphere is a major source of plasma to the magnetosphere. Its presence, especially that of ions heavier than He+, mass loads the magnetosphere and changes reconnection rates, current system configurations, plasma wave excitation and wave-particle interactions. It even impacts the propagation of information. We present a brief overview of the major processes and scientific history of this field. There are still major gaps, however, in our understanding of the global-scale nature of ionospheric outflow. We discuss these unresolved problems highlighting the leading questions still outstanding on this topic. First and foremost, since the measurements of ionospheric outflow have largely come from individual satellites and sounding rockets, the processes are best known on the local level, while the spatial distribution of outflow has never been simultaneously measured on more global scales. The spatial coherence and correlation of outflow across time and space have not been quantified. Furthermore, the composition of the outflow is often only measured at a coarse level of H+, He+, and O+, neglecting other species such as N+ or moleculars. However, resolving O+ from N+, as is customary in planetary research, aids in revealing the physics and altitude dependence of the energization processes in the ionosphere. Similarly, fine-resolution velocity space measurements of ionospheric outflow have been limited, yet such observations can also reveal energization processes driving the outflow. A final unresolved issue to mention is magnetically conjugate outflow and the full extent of hemispherically asymmetric outflow fluxes or fluence. Each of these open questions have substantial ramifications for magnetospheric physics; their resolution could yield sweeping changes in our understanding of nonlinear feedback and cross-scale physical interactions, magnetosphere-ionosphere coupling, and geospace system-level science.

1D profiling using highly dispersive guided waves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Volker, Arno; Zon, Tim van; Enthoven, Daniel

2015-03-31

Corrosion is one of the industries major issues regarding the integrity of assets. Currently inspections are conducted at regular intervals to ensure a sufficient integrity level of these assets. Cost reduction while maintaining a high level of reliability and safety of installations is a major challenge. There are many situations where the actual defect location is not accessible, e.g., a pipe support or a partially buried pipe. Guided wave tomography has been developed to reconstruct the wall thickness. In case of bottom of the line corrosion, i.e., a single corrosion pit, a simpler approach may be followed. Data is collectedmore » in a pit-catch configuration at the 12 o'clock position using highly dispersive guided waves. The phase spectrum is used to invert for a wall thickness profile in the circumferential direction, assuming a Gaussian defect profile. An EMAT sensor design has been made to measure at the 12 o'clock position of a pipe. The concept is evaluated on measured data, showing good sizing capabilities on a variety simple defect profiles.« less

Encapsulation of aluminium in geopolymers produced from metakaolin

NASA Astrophysics Data System (ADS)

Kuenzel, C.; Neville, T. P.; Omakowski, T.; Vandeperre, L.; Boccaccini, A. R.; Bensted, J.; Simons, S. J. R.; Cheeseman, C. R.

2014-04-01

Magnox swarf contaminated with trace levels of Al metal is an important UK legacy waste originated from the fuel rod cladding system used in Magnox nuclear power stations. Composite cements made from Portland cement and blast furnace slag form a potential encapsulation matrix. However the high pH of this system causes the Al metal to corrode causing durability issues. Geopolymers derived from metakaolin are being investigated as an alternative encapsulation matrix for Magnox swarf waste and the corrosion kinetics and surface interactions of Al with metakaolin geopolymer are reported in this paper. It is shown that the pH of the geopolymer paste can be controlled by the selection of metakaolin and the sodium silicate solution used to form the geopolymer. A decrease in pH of the activation solution reduces corrosion of the Al metal and increases the stability of bayerite and gibbsite layers formed on the Al surface. The bayerite and gibbsite act as a passivation layer which inhibits further corrosion and mitigates H2 generation. The research shows that optimised metakaolin geopolymers have potential to be used to encapsulate legacy Magnox swarf wastes.

The Public/Private Partnership behind the Cash and Counseling Demonstration and Evaluation: Its Origins, Challenges, and Unresolved Issues

PubMed Central

Knickman, James R; Stone, Robyn I

2007-01-01

objective To discuss why and how the Cash and Counseling Demonstration came to be designed, implemented, and evaluated through a partnership between the U.S. Department of Health and Human Services Office of the Assistant Secretary for Planning and Evaluation (ASPE) and the Robert Wood Johnson Foundation (RWJF). Principal Findings This public/private partnership was created by two colleagues who were motivated by the need for funding to conduct a large-scale demonstration and evaluation, the prestige that both organizations brought to the project, the ability to draw on both organizations' experience and expertise, and the potential to maximize flexibility in the design and implementation of the demonstration. The partnership, which has lasted over a decade and has supported two generations of Cash and Counseling programs, overcame several challenges including getting approval for the project through their respective bureaucracies, managing the decision making process and the ongoing program across the two organizations, dealing with leadership and staff turnover, and reaching consensus on how to apportion credit for the success of the program. Several unresolved issues remain, including how the program gets operationalized within each state, how case management is addressed within the context of a consumer-directed model like Cash and Counseling, how quality is assured in this type of program, and how the Internal Revenue Service views and treats Cash and Counseling and other consumer-directed programs. Conclusion This public/private partnership is an illustration of how public dollars can be leveraged effectively to examine a pressing policy issue and to produce information that can be translated into better policy and practice. The ASPE/RWJF collaboration made it possible to develop, test, and expand a policy-oriented demonstration project that has become a pivotal strategy in most states' efforts to build their home and community-based service systems. PMID:17244288

Assessment of in vitro temporal corrosion and cytotoxicity of AZ91D alloy.

PubMed

Del Gaudio, Costantino; Bagalà, Paolo; Venturini, Marco; Grandi, Claudio; Parnigotto, Pier Paolo; Bianco, Alessandra; Montesperelli, Giampiero

2012-10-01

Magnesium alloys represent a valuable option for the production of bioresorbable implantable medical devices aimed to improve the therapeutic approach and minimize the potential risks related to biostable materials. In this regard, the degradation process needs to be carefully evaluated in order to assess the effectiveness of the regenerative support and the eventual toxic effects induced by the released corrosion products. Aluminium is one of the most common alloying element that raised several safety concerns, contributing to shift the investigation toward Al-free alloys. To delve into this issue, a long-term investigation (up to 28 days) was performed using AZ91D alloy, due to its relevant Al content. Immersion tests in phosphate buffered saline (PBS) solution was performed following the ASTM standards and the corrosion behaviour was evaluated at fixed time points by means of electrochemical techniques. Cytotoxic effects were assessed by culturing human neuroblastoma cells with conditioned medium derived from immersion tests at different dilution degree. An increase in the resistance corrosion with the time was observed. In all the investigated cases the presence of Al in the conditioned media did not induce significant toxic effects directly correlated to its content. A decrease of cell viability was only observed in the case of 50 % dilution of PBS conditioned for the longest immersion period (i.e., 28 days).

Structure-composition-property relationships in 5xxx series aluminum alloys

NASA Astrophysics Data System (ADS)

Unocic, Kinga A.

Al-Mg alloys are well suited for marine applications due to their low density, ease of fabrication, structural durability, and most notably resistance to corrosion. The purpose of this study is to investigate the effects of alloying additions, mechanical processing and heat treatments on the development of grain boundary phases that have an effect on intergranular corrosion (IGC). Cu, Zn, and Si modified compositions of AA5083 were produced that were subjected to a low and high degree of cold work and various heat treatments. ASTM G67 (NAMLT) intergranular corrosion testing and detailed microstructural characterization for various alloys was carried out. An optimal composition and processing condition that yielded the best intergranular corrosion resistant material was identified based on the ASTM G67 test screening. Further, the outstanding modified AA5083 was selected for further microstructural analysis. This particular alloy with has a magnesium level high enough to make it susceptible to intergranular corrosion is very resistant to IGC. It was found that development of the appropriate sub-structure with some Cu, Si and Zn resulted in a material very resistant to IGC. Formation of many sinks, provided by sub-boundaries, within microstructure is very beneficial since it produces a relatively uniform distribution of Mg in the grain interiors, and this can suppress sensitization of this alloy very successfully. This is a very promising rote for the production of high-strength, and corrosion resistant aluminum alloys. Additionally in this study, TEM sample preparation become very crucial step in grain boundary phase investigation. Focus Ion Beam (FIB) milling was used as a primary TEM sample preparation technique because it enables to extract the samples from desired and very specific locations without dissolving grain boundary phases as it was in conventional electropolishing method. However, other issues specifically relevant to FIB milling of aluminum alloys related to Ga accumulation were discovered, that produce significant microstructural artifacts. It is well known that liquid gallium can cause Liquid Metal Embitterment (LME) aluminum alloys, and gallium readily penetrates aluminum grain boundaries. Low energy Ar ion nanomilling is potentially quite effective at removing gallium from the external and internal surfaces of aluminum thin foils, but can still leave persistent artifacts. Al-Mg alloys can be also susceptible to localized corrosion such as pitting corrosion in the presence of chloride ions. In this study the phases responsible for this type of corrosion were identified. ASSET (ASTM G66) test was used to determine the influence of heat-treatment on pitting corrosion on various modified AA5083 alloys. Additionally, potentiodynamic polarization as well as potentiostatic measurements in conjunction with SEM analysis were carried out to obtain pitting potential (Epit) and to determine the location of metastable pit initiation, respectively.

Alloy Microstructure Dictates Corrosion Modes in THA Modular Junctions.

PubMed

Pourzal, Robin; Hall, Deborah J; Ehrich, Jonas; McCarthy, Stephanie M; Mathew, Mathew T; Jacobs, Joshua J; Urban, Robert M

2017-12-01

Adverse local tissue reactions (ALTRs) triggered by corrosion products from modular taper junctions are a known cause of premature THA failure. CoCrMo devices are of particular concern because cobalt ions and chromium-orthophosphates were shown to be linked to ALTRs, even in metal-on-polyethylene THAs. The most common categories of CoCrMo alloy are cast and wrought alloy, which exhibit fundamental microstructural differences in terms of grain size and hard phases. The impact of implant alloy microstructure on the occurring modes of corrosion and subsequent metal ion release is not well understood. The purpose of this study was to determine whether (1) the microstructure of cast CoCrMo alloy varies broadly between manufacturers and can dictate specific corrosion modes; and whether (2) the microstructure of wrought CoCrMo alloy is more consistent between manufacturers and has low implications on the alloy's corrosion behavior. The alloy microstructure of four femoral-stem and three femoral-head designs from four manufacturers was metallographically and electrochemically characterized. Three stem designs were made from cast alloy; all three head designs and one stem design were made from wrought alloy. Alloy samples were sectioned from retrieved components and then polished and etched to visualize grain structure and hard phases such as carbides (eg, M 23 C 6 ) or intermetallic phases (eg, σ phase). Potentiodynamic polarization (PDP) tests were conducted to determine the corrosion potential (E corr ), corrosion current density (I corr ), and pitting potential (E pit ) for each alloy. Four devices were tested within each group, and each measurement was repeated three times to ensure repeatable results. Differences in PDP metrics between manufacturers and between alloys with different hard phase contents were compared using one-way analysis of variance and independent-sample t-tests. Microstructural features such as twin boundaries and slip bands as well as corrosion damage features were viewed and qualitatively assessed in a scanning electron microscope. We found broad variability in implant alloy microstructure for both cast and wrought alloy between manufacturers, but also within the same implant design. In cast alloys, there was no difference in PDP metrics between manufacturers. However, coarse hard phases and clusters of hard phases (mainly intermetallic phases) were associated with severe phase boundary corrosion and pitting corrosion. Furthermore, cast alloys with hard phases had a lower E pit than those without (0.46 V, SD 0.042; 0.53 V, SD 0.03, respectively; p = 0.015). Wrought alloys exhibited either no hard phases or numerous carbides (M 23 C 6 ). However, the corrosion behavior was mainly affected by lattice defects and banded structures indicative of segregations that appear to be introduced during bar stock manufacturing. Alloys with banding had a lower E corr (p = 0.008) and higher I corr (p = 0.028) than alloys without banding (-0.76 V, SD 0.003; -0.73 V, SD 0.009; and 1.14 × 10 -4 mA/cm 2 , SD 1.47 × 10 -5 ; 5.2 × 10 -5 mA/cm 2 , SD 2.57 × 10 -5 , respectively). Alloys with carbides had a slightly higher E corr (p = 0.046) than those without (-0.755 V, SD 0.005; -0.761 V, SD 0.004); however, alloys with carbides exhibited more severe corrosion damage as a result of phase boundary corrosion, hard phase detachment, and subsequent local crevice corrosion. The observed variability in CoCrMo alloy microstructure of both cast and wrought components in this study appears to be an important issue to address, perhaps through better standards, to minimize in vivo corrosion. The finding of the banded structures within wrought alloys is especially concerning because it unfavorably influences the corrosion behavior independent of the manufacturer. The findings suggest that a homogeneous alloy microstructure with a minimal hard phase fraction exhibits more favorable corrosion behavior within the in vivo environment of modular taper junctions, thus lowering metal ion release and subsequently the risk of ALTRs to corrosion products. Also, the question arises if hard phases fulfill a useful purpose in metal-on-polyethylene bearings, because they may come with a higher risk of phase boundary corrosion and pitting corrosion and the benefit they provide by adding strength is not needed (unlike in metal-on-metal bearings). Implant failure resulting from corrosion processes within modular junctions is a major concern in THA. Our results suggest that implant alloy microstructure is not sufficiently standardized and may also dictate specific corrosion modes and subsequent metal ion release.

Personal Health, Person-centred Health and Personalised Medicine - Concepts, Consumers, Confusion and Challenges in the Informatics World.

PubMed

Rigby, M

2012-01-01

To define and assess 'Consumer Health Informatics' and related emergent issues in an era of new media and of personalisation of care, and from this to define what actions need to be taken to optimise benefits and address risks. Definition of key concepts; review of health personalisation, emergent health information and communication technologies and knowledge sources available to citizens and social media; and identification of unresolved issues threatening optimal use of each. A structured review supported by citations and examples. Several new aspects of consumer health informatics are emerging, including new knowledge sources, feedback on treatments and care providers, on-line videos, and a new generation of patient experience sites including those which are for profit and seek to influence treatment paradigms. Not just the information usage, but also the potential social challenges and malicious abuses, are global issues, and also transcend the traditional health community and thus should be addressed in partnership with other global agencies.

Vertebrate Reservoirs of Arboviruses: Myth, Synonym of Amplifier, or Reality?

PubMed Central

Kuno, Goro; Mackenzie, John S.; Plyusnin, Alexander; Gubler, Duane J.

2017-01-01

The rapid succession of the pandemic of arbovirus diseases, such as dengue, West Nile fever, chikungunya, and Zika fever, has intensified research on these and other arbovirus diseases worldwide. Investigating the unique mode of vector-borne transmission requires a clear understanding of the roles of vertebrates. One major obstacle to this understanding is the ambiguity of the arbovirus definition originally established by the World Health Organization. The paucity of pertinent information on arbovirus transmission at the time contributed to the notion that vertebrates played the role of reservoir in the arbovirus transmission cycle. Because this notion is a salient feature of the arbovirus definition, it is important to reexamine its validity. This review addresses controversial issues concerning vertebrate reservoirs and their role in arbovirus persistence in nature, examines the genesis of the problem from a historical perspective, discusses various unresolved issues from multiple points of view, assesses the present status of the notion in light of current knowledge, and provides options for a solution to resolve the issue. PMID:28703771

Vertebrate Reservoirs of Arboviruses: Myth, Synonym of Amplifier, or Reality?

PubMed

Kuno, Goro; Mackenzie, John S; Junglen, Sandra; Hubálek, Zdeněk; Plyusnin, Alexander; Gubler, Duane J

2017-07-13

The rapid succession of the pandemic of arbovirus diseases, such as dengue, West Nile fever, chikungunya, and Zika fever, has intensified research on these and other arbovirus diseases worldwide. Investigating the unique mode of vector-borne transmission requires a clear understanding of the roles of vertebrates. One major obstacle to this understanding is the ambiguity of the arbovirus definition originally established by the World Health Organization. The paucity of pertinent information on arbovirus transmission at the time contributed to the notion that vertebrates played the role of reservoir in the arbovirus transmission cycle. Because this notion is a salient feature of the arbovirus definition, it is important to reexamine its validity. This review addresses controversial issues concerning vertebrate reservoirs and their role in arbovirus persistence in nature, examines the genesis of the problem from a historical perspective, discusses various unresolved issues from multiple points of view, assesses the present status of the notion in light of current knowledge, and provides options for a solution to resolve the issue.

78 FR 14442 - Airworthiness Directives; Turbomeca S.A. Turboshaft Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... certain serial number (S/N) N2 sensor harnesses. This AD requires replacement of the same S/N harnesses, and requires replacement of additional S/N N2 sensor harnesses. This AD was prompted by corrosion detected in affected N2 sensor harnesses. We are issuing this AD to prevent inadvertent activation of the...

78 FR 38018 - Notice of Availability of Government-Owned Inventions; Available for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

... available for licensing: U.S. Patent No. 8,262,938: Active Aluminum Rich Coatings, Navy Case PAX53, Inventors Matzdorf et al, issued September 11, 2012//U.S. Patent No. 8,277,688: Aluminum Alloy Coated... (PCT) filing//U.S. Patent Application No. 13/628,232: Coated Aluminum Alloy Pigments and Corrosion...

Desalination: Status and Federal Issues

DTIC Science & Technology

2009-12-30

on one side and lets purified water through. Reverse osmosis plants have fewer problems with corrosion and usually have lower energy requirements...Texas) and cities are actively researching and investigating the feasibility of large-scale desalination plants for municipal water supplies...desalination research and development, and in construction and operational costs of desalination demonstration projects and full-scale plants

Conflict management: a primer for doctors in training.

PubMed

Saltman, D C; O'Dea, N A; Kidd, M R

2006-01-01

Conflict in the health arena is a growing concern and is well recognised for doctors in training. Its most extreme expression, workplace violence is on the increase. There is evidence that many conflicts remain unsatisfactorily resolved or unresolved, and result in ongoing issues for staff morale. This paper describes the nature of conflict in the health care system and identifies the difference between conflict and disagreement. Using a conflict resolution model, strategies for dealing with conflict as it arises are explored and tips are provided on how to effectively manage conflict to a satisfactory resolution for all parties.

Advances in molecular-based diagnostics in meeting crop biosecurity and phytosanitary issues.

PubMed

Schaad, Norman W; Frederick, Reid D; Shaw, Joe; Schneider, William L; Hickson, Robert; Petrillo, Michael D; Luster, Douglas G

2003-01-01

Awareness of crop biosecurity and phytosanitation has been heightened since 9/11 and the unresolved anthrax releases in October 2001. Crops are highly vulnerable to accidental or deliberate introductions of crop pathogens from outside U.S. borders. Strategic thinking about protection against deliberate or accidental release of a plant pathogen is an urgent priority. Rapid detection will be the key to success. This review summarizes recent progress in the development of rapid real-time PCR protocols and evaluates their effectiveness in a proposed nationwide network of diagnostic laboratories that will facilitate rapid diagnostics and improved communication.

Neutron star binaries, pulsars and burst sources

NASA Technical Reports Server (NTRS)

Lamb, F. K.

1981-01-01

Unresolved issues involving neutron star binaries, pulsars, and burst sources are described. Attention is drawn to the types of observations most likely to resolve them. Many of these observations are likely to be carried out during the next decade by one or more missions that have been approved or proposed. Flux measurements with an imaging detector and broad-band spectroscopic studies in the energy range 30-150 keV are discussed. The need for soft X-ray and X-ray observations with an instrument which has arcminute angular resolution and an effective area substantially greater than of ROSAT or EXOSAT is also discussed.

The cognitive neuroscience of ageing.

PubMed

Grady, Cheryl

2012-06-20

The availability of neuroimaging technology has spurred a marked increase in the human cognitive neuroscience literature, including the study of cognitive ageing. Although there is a growing consensus that the ageing brain retains considerable plasticity of function, currently measured primarily by means of functional MRI, it is less clear how age differences in brain activity relate to cognitive performance. The field is also hampered by the complexity of the ageing process itself and the large number of factors that are influenced by age. In this Review, current trends and unresolved issues in the cognitive neuroscience of ageing are discussed.

Patchwork plagiarism – a jigsaw of stolen puzzle pieces

PubMed Central

Smolčić, Vesna Šupak; Bilić-Zulle, Lidija

2013-01-01

Plagiarism remains at the top in terms of interest to the scientific community. In its many vicious forms, patchwork plagiarism is characterized by numerous unresolved issues and often passes “below the radar” of editors and reviewers. The problem of detecting the complexity of misconduct has been partially resolved by plagiarism detection software. However, interpretation of relevant reports is not always obvious or easy. This article deals with plagiarism in general and patchwork plagiarism in particular, as well as related problems that editors must deal with to maintain the integrity of scientific journals. PMID:23457762

Conflict management: a primer for doctors in training

PubMed Central

Saltman, D C; O'Dea, N A; Kidd, M R

2006-01-01

Conflict in the health arena is a growing concern and is well recognised for doctors in training. Its most extreme expression, workplace violence is on the increase. There is evidence that many conflicts remain unsatisfactorily resolved or unresolved, and result in ongoing issues for staff morale. This paper describes the nature of conflict in the health care system and identifies the difference between conflict and disagreement. Using a conflict resolution model, strategies for dealing with conflict as it arises are explored and tips are provided on how to effectively manage conflict to a satisfactory resolution for all parties. PMID:16397073

Genes, cells, and biobanks: Yes, there’s still a consent problem

PubMed Central

Murdoch, Blake

2017-01-01

From a research perspective, the interest in biobanking continues to intensify. Governments and industry have invested heavily in biobanks, as exemplified by initiatives like the United Kingdom Biobank and United States' Precision Medicine Initiative. But despite this enthusiasm, many profound legal and ethical challenges remain unresolved. Indeed, there continues to be disagreements about how best to obtain consent and the degree and nature of control that research participants retain over donated samples and health information. Emerging social trends—including concerns about commercialization and perceived rights of continuing control (“biorights”)—seem likely to intensify these issues. PMID:28742850

Multigrid techniques for unstructured meshes

NASA Technical Reports Server (NTRS)

Mavriplis, D. J.

1995-01-01

An overview of current multigrid techniques for unstructured meshes is given. The basic principles of the multigrid approach are first outlined. Application of these principles to unstructured mesh problems is then described, illustrating various different approaches, and giving examples of practical applications. Advanced multigrid topics, such as the use of algebraic multigrid methods, and the combination of multigrid techniques with adaptive meshing strategies are dealt with in subsequent sections. These represent current areas of research, and the unresolved issues are discussed. The presentation is organized in an educational manner, for readers familiar with computational fluid dynamics, wishing to learn more about current unstructured mesh techniques.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hattrick-Simpers, Jason R.; Gregoire, John M.; Kusne, A. Gilad

With their ability to rapidly elucidate composition-structure-property relationships, high-throughput experimental studies have revolutionized how materials are discovered, optimized, and commercialized. It is now possible to synthesize and characterize high-throughput libraries that systematically address thousands of individual cuts of fabrication parameter space. An unresolved issue remains transforming structural characterization data into phase mappings. This difficulty is related to the complex information present in diffraction and spectroscopic data and its variation with composition and processing. Here, we review the field of automated phase diagram attribution and discuss the impact that emerging computational approaches will have in the generation of phase diagrams andmore » beyond.« less

Staubli TX-90XL robot qualification at the LLIHE.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Covert, Timothy Todd

The Light Initiated High Explosive (LIHE) Facility uses a robotic arm to spray explosive material onto test items for impulse tests. In 2007, the decision was made to replace the existing PUMA 760 robot with the Staubli TX-90XL. A qualification plan was developed and implemented to verify the safe operating conditions and failure modes of the new system. The robot satisfied the safety requirements established in the qualification plan. A performance issue described in this report remains unresolved at the time of this publication. The final readiness review concluded the qualification of this robot at the LIHE facility.

Fitting Nonlinear Ordinary Differential Equation Models with Random Effects and Unknown Initial Conditions Using the Stochastic Approximation Expectation-Maximization (SAEM) Algorithm.

PubMed

Chow, Sy-Miin; Lu, Zhaohua; Sherwood, Andrew; Zhu, Hongtu

2016-03-01

The past decade has evidenced the increased prevalence of irregularly spaced longitudinal data in social sciences. Clearly lacking, however, are modeling tools that allow researchers to fit dynamic models to irregularly spaced data, particularly data that show nonlinearity and heterogeneity in dynamical structures. We consider the issue of fitting multivariate nonlinear differential equation models with random effects and unknown initial conditions to irregularly spaced data. A stochastic approximation expectation-maximization algorithm is proposed and its performance is evaluated using a benchmark nonlinear dynamical systems model, namely, the Van der Pol oscillator equations. The empirical utility of the proposed technique is illustrated using a set of 24-h ambulatory cardiovascular data from 168 men and women. Pertinent methodological challenges and unresolved issues are discussed.

The marginalisation of Indigenous students within school mathematics and the math wars: seeking resolutions within ethical spaces

NASA Astrophysics Data System (ADS)

Russell, Gale L.; Chernoff, Egan J.

2013-03-01

In mathematics education, there are (at least) two seemingly disparate and unethical issues that have been allowed to continue unresolved for decades: the math wars (traditional versus reform teaching and learning of mathematics) and the marginalisation of Indigenous students within K-12 mathematics. Willie Ermine, an Indigenous scholar, has proposed the use of ethical spaces to explore and analyse occurrences of unethical situations arising between the "intersection of Indigenous law and Canadian Legal systems" (Ermine, Indigenous Law Journal 6(1):193-203, 2007). This paper brings Ermine's notion of ethical spaces to the field of mathematics education research as the theoretical framework for analysing the aforementioned issues. The result of this analysis is a potential single theoretical resolution to both dilemmas that can also serve as a significant factor in the processes of decolonisation.

FITTING NONLINEAR ORDINARY DIFFERENTIAL EQUATION MODELS WITH RANDOM EFFECTS AND UNKNOWN INITIAL CONDITIONS USING THE STOCHASTIC APPROXIMATION EXPECTATION–MAXIMIZATION (SAEM) ALGORITHM

PubMed Central

Chow, Sy- Miin; Lu, Zhaohua; Zhu, Hongtu; Sherwood, Andrew

2014-01-01

The past decade has evidenced the increased prevalence of irregularly spaced longitudinal data in social sciences. Clearly lacking, however, are modeling tools that allow researchers to fit dynamic models to irregularly spaced data, particularly data that show nonlinearity and heterogeneity in dynamical structures. We consider the issue of fitting multivariate nonlinear differential equation models with random effects and unknown initial conditions to irregularly spaced data. A stochastic approximation expectation–maximization algorithm is proposed and its performance is evaluated using a benchmark nonlinear dynamical systems model, namely, the Van der Pol oscillator equations. The empirical utility of the proposed technique is illustrated using a set of 24-h ambulatory cardiovascular data from 168 men and women. Pertinent methodological challenges and unresolved issues are discussed. PMID:25416456

Can temporal fine structure represent the fundamental frequency of unresolved harmonics?

PubMed

Oxenham, Andrew J; Micheyl, Christophe; Keebler, Michael V

2009-04-01

At least two modes of pitch perception exist: in one, the fundamental frequency (F0) of harmonic complex tones is estimated using the temporal fine structure (TFS) of individual low-order resolved harmonics; in the other, F0 is derived from the temporal envelope of high-order unresolved harmonics that interact in the auditory periphery. Pitch is typically more accurate in the former than in the latter mode. Another possibility is that pitch can sometimes be coded via the TFS from unresolved harmonics. A recent study supporting this third possibility [Moore et al. (2006a). J. Acoust. Soc. Am. 119, 480-490] based its conclusion on a condition where phase interaction effects (implying unresolved harmonics) accompanied accurate F0 discrimination (implying TFS processing). The present study tests whether these results were influenced by audible distortion products. Experiment 1 replicated the original results, obtained using a low-level background noise. However, experiments 2-4 found no evidence for the use of TFS cues with unresolved harmonics when the background noise level was raised, or the stimulus level was lowered, to render distortion inaudible. Experiment 5 measured the presence and phase dependence of audible distortion products. The results provide no evidence that TFS cues are used to code the F0 of unresolved harmonics.

Unresolved trauma in mothers: intergenerational effects and the role of reorganization

PubMed Central

Iyengar, Udita; Kim, Sohye; Martinez, Sheila; Fonagy, Peter; Strathearn, Lane

2014-01-01

A mother's unresolved trauma may interfere with her ability to sensitively respond to her infant, thus affecting the development of attachment in her own child, and potentially contributing to the intergenerational transmission of trauma. One novel construct within the Dynamic Maturational Model of Attachment and Adaptation (DMM) coding of the Adult Attachment Interview (AAI) is “reorganization,” a process whereby speakers are actively changing their understanding of past and present experiences and moving toward attachment security. We conducted a study of mothers with unresolved trauma, exploring their own attachment classification, attachment outcomes of their children, and the potential effects of reorganization on child attachment. Forty-seven first-time mothers participated in the AAI during pregnancy, and returned with their child at 11 months to assess child attachment using the Strange Situation Procedure. Mothers with and without unresolved trauma were compared. We found that mothers with unresolved trauma had insecure attachment themselves and were more likely to have infants with insecure attachment. However, the one exception was that all of the mothers with unresolved trauma who were reorganizing toward secure attachment had infants with secure attachment. These preliminary findings suggest that mothers who are reorganizing may be able to more sensitively respond to their child's cues, contributing to the development of secure attachment. While our results need to be replicated in a larger cohort, this study is the first to explore the construct of reorganization and its potential relationship with child attachment. If confirmed in future studies, it may provide clinical insight into the intergenerational transmission of insecure attachment within the context of unresolved trauma. PMID:25225490

Evaluation of EMP/EMI Requirements versus Corrosion Prevention Methods

DTIC Science & Technology

1992-10-07

TO 1-1-1, Cleaning of Aerospace Equipment. (Basic Issue. 29 Jun 79, Change 18, 3 Sep 87). b. TO 1-1-2, Corrosion Prevention and Control by Aerospace...n% 414) 1413 4- 0 CC ,r to > u I >V 41-41q41" 41 O1 0O4) 1 E Lfl 4) ... JJ ( E-4 I- I4 S- 4r4zzu V z m 0 : 29 Table 5. Location of Test Areas on E-3...Nm " -x -! r •i A26 I NIN II I~ w- cA27 I I I II i -N .3O Is I/n A280 mU < I 1) I __ _ __ A28 I I I < 0 N w I I I Ti NA III

Ethics, policy, and educational issues in genetic testing.

PubMed

Williams, Janet K; Skirton, Heather; Masny, Agnes

2006-01-01

Analyze ethics, public policy, and education issues that arise in the United States (US) and the United Kingdom (UK) when genomic information acquired as a result of genetic testing is introduced into healthcare services. Priorities in the Ethical, Legal, and Social Issues Research Program include privacy, integration of genetic services into clinical health care, and educational preparation of the nursing workforce. These constructs are used to examine health policies in the US and UK, and professional interactions of individuals and families with healthcare providers. Individual, family, and societal goals may conflict with current healthcare practices and policies when genetic testing is done. Current health policies do not fully address these concerns. Unresolved issues include protection of privacy of individuals while considering genetic information needs of family members, determination of appropriate monitoring of genetic tests, addressing genetic healthcare discrepancies, and assuring appropriate nursing workforce preparation. Introduction of genetic testing into health care requires that providers are knowledgeable regarding ethical, policy, and practice issues in order to minimize risk for harm, protect the rights of individuals and families, and consider societal context in the management of genetic test results. Understanding of these issues is a component of genetic nursing competency that must be addressed at all levels of nursing education.

Analysis of Pipeline Steel Corrosion Data From NBS (NIST) Studies Conducted Between 1922–1940 and Relevance to Pipeline Management

PubMed Central

Ricker, Richard E.

2010-01-01

Between 1911 and 1984, the National Bureau of Standards (NBS) conducted a large number of corrosion studies that included the measurement of corrosion damage to samples exposed to real-world environments. One of these studies was an investigation conducted between 1922 and 1940 into the corrosion of bare steel and wrought iron pipes buried underground at 47 different sites representing different soil types across the Unites States. At the start of this study, very little was known about the corrosion of ferrous alloys underground. The objectives of this study were to determine (i) if coatings would be required to prevent corrosion, and (ii) if soil properties could be used to predict corrosion and determine when coatings would be required. While this study determined very quickly that coatings would be required for some soils, it found that the results were so divergent that even generalities based on this data must be drawn with care. The investigators concluded that so many diverse factors influence corrosion rates underground that planning of proper tests and interpretation of the results were matters of considerable difficulty and that quantitative interpretations or extrapolations could be done “only in approximate fashion” and attempted only in the “restricted area” of the tests until more complete information is available. Following the passage of the Pipeline Safety Improvement Act in 2002 and at the urging of the pipeline industry, the Office of Pipeline Safety of the U.S. Department of Transportation approached the National Institute of Standards and Technology (NBS became NIST in 1988) and requested that the data from this study be reexamined to determine if the information handling and analysis capabilities of modern computers and software could enable the extraction of more meaningful information from these data. This report is a summary of the resulting investigations. The data from the original NBS studies were analyzed using a variety of commercially available software packages for statistical analysis. The emphasis was on identifying trends in the data that could be later exploited in the development of an empirical model for predicting the range of expected corrosion behavior for any given set of soil chemistry and conditions. A large number of issues were identified with this corrosion dataset, but given the limited knowledge of corrosion and statistical analysis at the time the study was conducted, these shortcomings are not surprising and many of these were recognized by the investigators before the study was concluded. However, it is important to keep in mind that complete soil data is provided for less than half of the sites in this study. In agreement with the initial study, it was concluded that any differences in the corrosion behavior of the alloys could not be resolved due to the scatter in the results from the environmental factors and no significant difference could be determined between alloys. Linear regression and curve fitting of the corrosion damage measurements against the measured soil composition and properties found some weak trends. These trends improved with multiple regression, and empirical equations representing the performance of the samples in the tests were developed with uncertainty estimates. The uncertainties in these empirical models for the corrosion data were large, and extrapolation beyond the parameter space or exposure times of these experiments will create additional uncertainties. It is concluded that equations for the estimation of corrosion damage distributions and rates can be developed from these data, but these models will always have relatively large uncertainties that will limit their utility. These uncertainties result from the scatter in the measurements due to annual, seasonal, and sample position dependent variations at the burial sites. The data indicate that more complete datasets with soil property measurements reflecting the properties of the soil and ground water directly in contact with the sample from statistically designed experiments would greatly reduce this scatter and enable more representative predictions. PMID:27134792

Analysis of Pipeline Steel Corrosion Data From NBS (NIST) Studies Conducted Between 1922-1940 and Relevance to Pipeline Management.

PubMed

Ricker, Richard E

2010-01-01

Between 1911 and 1984, the National Bureau of Standards (NBS) conducted a large number of corrosion studies that included the measurement of corrosion damage to samples exposed to real-world environments. One of these studies was an investigation conducted between 1922 and 1940 into the corrosion of bare steel and wrought iron pipes buried underground at 47 different sites representing different soil types across the Unites States. At the start of this study, very little was known about the corrosion of ferrous alloys underground. The objectives of this study were to determine (i) if coatings would be required to prevent corrosion, and (ii) if soil properties could be used to predict corrosion and determine when coatings would be required. While this study determined very quickly that coatings would be required for some soils, it found that the results were so divergent that even generalities based on this data must be drawn with care. The investigators concluded that so many diverse factors influence corrosion rates underground that planning of proper tests and interpretation of the results were matters of considerable difficulty and that quantitative interpretations or extrapolations could be done "only in approximate fashion" and attempted only in the "restricted area" of the tests until more complete information is available. Following the passage of the Pipeline Safety Improvement Act in 2002 and at the urging of the pipeline industry, the Office of Pipeline Safety of the U.S. Department of Transportation approached the National Institute of Standards and Technology (NBS became NIST in 1988) and requested that the data from this study be reexamined to determine if the information handling and analysis capabilities of modern computers and software could enable the extraction of more meaningful information from these data. This report is a summary of the resulting investigations. The data from the original NBS studies were analyzed using a variety of commercially available software packages for statistical analysis. The emphasis was on identifying trends in the data that could be later exploited in the development of an empirical model for predicting the range of expected corrosion behavior for any given set of soil chemistry and conditions. A large number of issues were identified with this corrosion dataset, but given the limited knowledge of corrosion and statistical analysis at the time the study was conducted, these shortcomings are not surprising and many of these were recognized by the investigators before the study was concluded. However, it is important to keep in mind that complete soil data is provided for less than half of the sites in this study. In agreement with the initial study, it was concluded that any differences in the corrosion behavior of the alloys could not be resolved due to the scatter in the results from the environmental factors and no significant difference could be determined between alloys. Linear regression and curve fitting of the corrosion damage measurements against the measured soil composition and properties found some weak trends. These trends improved with multiple regression, and empirical equations representing the performance of the samples in the tests were developed with uncertainty estimates. The uncertainties in these empirical models for the corrosion data were large, and extrapolation beyond the parameter space or exposure times of these experiments will create additional uncertainties. It is concluded that equations for the estimation of corrosion damage distributions and rates can be developed from these data, but these models will always have relatively large uncertainties that will limit their utility. These uncertainties result from the scatter in the measurements due to annual, seasonal, and sample position dependent variations at the burial sites. The data indicate that more complete datasets with soil property measurements reflecting the properties of the soil and ground water directly in contact with the sample from statistically designed experiments would greatly reduce this scatter and enable more representative predictions.

Error due to unresolved scales in estimation problems for atmospheric data assimilation

NASA Astrophysics Data System (ADS)

Janjic, Tijana

The error arising due to unresolved scales in data assimilation procedures is examined. The problem of estimating the projection of the state of a passive scalar undergoing advection at a sequence of times is considered. The projection belongs to a finite- dimensional function space and is defined on the continuum. Using the continuum projection of the state of a passive scalar, a mathematical definition is obtained for the error arising due to the presence, in the continuum system, of scales unresolved by the discrete dynamical model. This error affects the estimation procedure through point observations that include the unresolved scales. In this work, two approximate methods for taking into account the error due to unresolved scales and the resulting correlations are developed and employed in the estimation procedure. The resulting formulas resemble the Schmidt-Kalman filter and the usual discrete Kalman filter, respectively. For this reason, the newly developed filters are called the Schmidt-Kalman filter and the traditional filter. In order to test the assimilation methods, a two- dimensional advection model with nonstationary spectrum was developed for passive scalar transport in the atmosphere. An analytical solution on the sphere was found depicting the model dynamics evolution. Using this analytical solution the model error is avoided, and the error due to unresolved scales is the only error left in the estimation problem. It is demonstrated that the traditional and the Schmidt- Kalman filter work well provided the exact covariance function of the unresolved scales is known. However, this requirement is not satisfied in practice, and the covariance function must be modeled. The Schmidt-Kalman filter cannot be computed in practice without further approximations. Therefore, the traditional filter is better suited for practical use. Also, the traditional filter does not require modeling of the full covariance function of the unresolved scales, but only modeling of the covariance matrix obtained by evaluating the covariance function at the observation points. We first assumed that this covariance matrix is stationary and that the unresolved scales are not correlated between the observation points, i.e., the matrix is diagonal, and that the values along the diagonal are constant. Tests with these assumptions were unsuccessful, indicating that a more sophisticated model of the covariance is needed for assimilation of data with nonstationary spectrum. A new method for modeling the covariance matrix based on an extended set of modeling assumptions is proposed. First, it is assumed that the covariance matrix is diagonal, that is, that the unresolved scales are not correlated between the observation points. It is postulated that the values on the diagonal depend on a wavenumber that is characteristic for the unresolved part of the spectrum. It is further postulated that this characteristic wavenumber can be diagnosed from the observations and from the estimate of the projection of the state that is being estimated. It is demonstrated that the new method successfully overcomes previously encountered difficulties.

Army-NASA aircrew/aircraft integration program. Phase 5: A3I Man-Machine Integration Design and Analysis System (MIDAS) software concept document

NASA Technical Reports Server (NTRS)

Banda, Carolyn; Bushnell, David; Chen, Scott; Chiu, Alex; Neukom, Christian; Nishimura, Sayuri; Prevost, Michael; Shankar, Renuka; Staveland, Lowell; Smith, Greg

1992-01-01

This is the Software Concept Document for the Man-machine Integration Design and Analysis System (MIDAS) being developed as part of Phase V of the Army-NASA Aircrew/Aircraft Integration (A3I) Progam. The approach taken in this program since its inception in 1984 is that of incremental development with clearly defined phases. Phase 1 began in 1984 and subsequent phases have progressed at approximately 10-16 month intervals. Each phase of development consists of planning, setting requirements, preliminary design, detailed design, implementation, testing, demonstration and documentation. Phase 5 began with an off-site planning meeting in November, 1990. It is expected that Phase 5 development will be complete and ready for demonstration to invited visitors from industry, government and academia in May, 1992. This document, produced during the preliminary design period of Phase 5, is intended to record the top level design concept for MIDAS as it is currently conceived. This document has two main objectives: (1) to inform interested readers of the goals of the MIDAS Phase 5 development period, and (2) to serve as the initial version of the MIDAS design document which will be continuously updated as the design evolves. Since this document is written fairly early in the design period, many design issues still remain unresolved. Some of the unresolved issues are mentioned later in this document in the sections on specific components. Readers are cautioned that this is not a final design document and that, as the design of MIDAS matures, some of the design ideas recorded in this document will change. The final design will be documented in a detailed design document published after the demonstrations.

Spatially unresolved SED fitting can underestimate galaxy masses: a solution to the missing mass problem

NASA Astrophysics Data System (ADS)

Sorba, Robert; Sawicki, Marcin

2018-05-01

We perform spatially resolved, pixel-by-pixel Spectral Energy Distribution (SED) fitting on galaxies up to z ˜ 2.5 in the Hubble eXtreme Deep Field (XDF). Comparing stellar mass estimates from spatially resolved and spatially unresolved photometry we find that unresolved masses can be systematically underestimated by factors of up to 5. The ratio of the unresolved to resolved mass measurement depends on the galaxy's specific star formation rate (sSFR): at low sSFRs the bias is small, but above sSFR ˜ 10-9.5 yr-1 the discrepancy increases rapidly such that galaxies with sSFRs ˜ 10-8 yr-1 have unresolved mass estimates of only one-half to one-fifth of the resolved value. This result indicates that stellar masses estimated from spatially unresolved data sets need to be systematically corrected, in some cases by large amounts, and we provide an analytic prescription for applying this correction. We show that correcting stellar mass measurements for this bias changes the normalization and slope of the star-forming main sequence and reduces its intrinsic width; most dramatically, correcting for the mass bias increases the stellar mass density of the Universe at high redshift and can resolve the long-standing discrepancy between the directly measured cosmic SFR density at z ≳ 1 and that inferred from stellar mass densities (`the missing mass problem').

Characterization of Sound Radiation by Unresolved Scales of Motion in Computational Aeroacoustics

NASA Technical Reports Server (NTRS)

Rubinstein, Robert; Zhou, Ye

1999-01-01

Evaluation of the sound sources in a high Reynolds number turbulent flow requires time-accurate resolution of an extremely large number of scales of motion. Direct numerical simulations will therefore remain infeasible for the forseeable future: although current large eddy simulation methods can resolve the largest scales of motion accurately the, they must leave some scales of motion unresolved. A priori studies show that acoustic power can be underestimated significantly if the contribution of these unresolved scales is simply neglected. In this paper, the problem of evaluating the sound radiation properties of the unresolved, subgrid-scale motions is approached in the spirit of the simplest subgrid stress models: the unresolved velocity field is treated as isotropic turbulence with statistical descriptors, evaluated from the resolved field. The theory of isotropic turbulence is applied to derive formulas for the total power and the power spectral density of the sound radiated by a filtered velocity field. These quantities are compared with the corresponding quantities for the unfiltered field for a range of filter widths and Reynolds numbers.

Preparation and corrosion resistance of magnesium phytic acid/hydroxyapatite composite coatings on biodegradable AZ31 magnesium alloy.

PubMed

Zhang, Min; Cai, Shu; Zhang, Feiyang; Xu, Guohua; Wang, Fengwu; Yu, Nian; Wu, Xiaodong

2017-06-01

In this work, a magnesium phytic acid/hydroxyapatite composite coating was successfully prepared on AZ31 magnesium alloy substrate by chemical conversion deposition technology with the aim of improving its corrosion resistance and bioactivity. The influence of hydroxyapatite (HA) content on the microstructure and corrosion resistance of the coatings was investigated. The results showed that with the increase of HA content in phytic acid solution, the cracks on the surface of the coatings gradually reduced, which subsequently improved the corrosion resistance of these coated magnesium alloy. Electrochemical measurements in simulated body fluid (SBF) revealed that the composite coating with 45 wt.% HA addition exhibited superior surface integrity and significantly improved corrosion resistance compared with the single phytic acid conversion coating. The results of the immersion test in SBF showed that the composite coating could provide more effective protection for magnesium alloy substrate than that of the single phytic acid coating and showed good bioactivity. Magnesium phytic acid/hydroxyapatite composite, with the desired bioactivity, can be synthesized through chemical conversion deposition technology as protective coatings for surface modification of the biodegradable magnesium alloy implants. The design idea of the new type of biomaterial is belong to the concept of "third generation biomaterial". Corrosion behavior and bioactivity of coated magnesium alloy are the key issues during implantation. In this study, preparation and corrosion behavior of magnesium phytic acid/hydroxyapatite composite coatings on magnesium alloy were studied. The basic findings and significance of this paper are as follows: 1. A novel environmentally friendly, homogenous and crack-free magnesium phytic acid/hydroxyapatite composite coating was fabricated on AZ31 magnesium alloy via chemical conversion deposition technology with the aim of enhancing its corrosion resistance and bioactivity. The chemical conversion coatings, which are formed through the reaction between the substrate and the environment, have attracted increasing attention owing to the relative low treatment temperature, favorable bonding to substrate and simple implementation process. 2. With the increasing of hydroxyapatite (HA) content, the crack width in the composite coatings and the thickness of the coatings exhibit obviously decreased. The reason is probably that when adding HA into the phytic acid solution, the amount of active hydroxyl groups in the phytic acid are reduced via forming the coordination bond between P-OH groups from phytic acid and P-OH groups from the surface of HA, thus decreasing the coating thickness and hydrogen formation, as well as avoiding coating cracking. 3. By adjusting the HA content to 45 wt.%, a dense and relatively smooth composite coating with ~1.4 μm thickness is obtained on magnesium alloy, and exhibits high corrosion resistance and good bioactivity when compared with the single phytic acid conversion coating.

The American Indian Holocaust: healing historical unresolved grief.

PubMed

Brave Heart, M Y; DeBruyn, L M

1998-01-01

American Indians experienced massive losses of lives, land, and culture from European contact and colonization resulting in a long legacy of chronic trauma and unresolved grief across generations. This phenomenon, labeled historical unresolved grief, contributes to the current social pathology of high rates of suicide, homicide, domestic violence, child abuse, alcoholism and other social problems among American Indians. The present paper describes the concept of historical unresolved grief and historical trauma among American Indians, outlining the historical as well as present social and political forces which exacerbate it. The abundant literature on Jewish Holocaust survivors and their children is used to delineate the intergenerational transmission of trauma, grief, and the survivor's child complex. Interventions based on traditional American Indian ceremonies and modern western treatment modalities for grieving and healing of those losses are described.

High temperature molten salt storage

NASA Astrophysics Data System (ADS)

Ives, J.; Newcomb, J. C.; Pard, A. G.

1985-10-01

The design of a high-temperature molten salt thermal energy storage (TES) concept, including some materials testing, was developed by Rockwell International's Rocketdyne Division (RD), under contract to SERI, and is described in this document. The main features of the concept are a conical hot tank with a liner and internal insulation that allows unrestricted relative thermal expansion and the use of cathodic protection (impressed voltage) to inhibit corrosion. The RD design uses two tanks and ternary eutectic lithium-sodium-potassium carbonates for sensible heat storage. The tanks were sized for 6 h of storage at a discharge rate of 300 MW, giving 1800 MWh total usable thermal storage capacity. The molten carbonate storage medium is cycled between 425 and 900C. From the design study, no definitive statement can be made as to the cost-effectiveness of cathodic protection. Several anode design issues need to be resolved before cathodic protection can significantly reduce corrosion where the liner comes in contact with molten salts. However, where the tank is exposed to salt vapor, the large corrosion allowance required for the liner without cathodic protection results in a much thicker liner wall and shorter liner life than originally perceived, which affects system costs significantly.

Multiscale processing of loss of metal: a machine learning approach

NASA Astrophysics Data System (ADS)

De Masi, G.; Gentile, M.; Vichi, R.; Bruschi, R.; Gabetta, G.

2017-07-01

Corrosion is one of the principal causes of degradation to failure of marine structures. In practice, localized corrosion is the most dangerous mode of attack and can result in serious failures, in particular in marine flowlines and inter-field lines, arousing serious concerns relatively to environmental impact. The progress in time of internal corrosion, the location along the route and across the pipe section, the development pattern and the depth of the loss of metal are a very complex issue: the most important factors are products characteristics, transport conditions over the operating lifespan, process fluid-dynamics, and pipeline geometrical configuration. Understanding which factors among them play the most important role is a key step to develop a model able to predict with enough accuracy the sections more exposed to risk of failure. Some factors play a crucial role at certain spatial scales while other factors at other scales. The Mutual Information Theory, intimately related to the concept of Shannon Entropy in Information theory, has been applied to detect the most important variables at each scale. Finally, the variables emerged from this analysis at each scale have been integrated in a predicting data driven model sensibly improving its performance.

On the Determination of Magnesium Degradation Rates under Physiological Conditions.

PubMed

Nidadavolu, Eshwara Phani Shubhakar; Feyerabend, Frank; Ebel, Thomas; Willumeit-Römer, Regine; Dahms, Michael

2016-07-28

The current physiological in vitro tests of Mg degradation follow the procedure stated according to the ASTM standard. This standard, although useful in predicting the initial degradation behavior of an alloy, has its limitations in interpreting the same for longer periods of immersion in cell culture media. This is an important consequence as the alloy's degradation is time dependent. Even if two different alloys show similar corrosion rates in a short term experiment, their degradation characteristics might differ with increased immersion times. Furthermore, studies concerning Mg corrosion extrapolate the corrosion rate from a single time point measurement to the order of a year (mm/y), which might not be appropriate because of time dependent degradation behavior. In this work, the above issues are addressed and a new methodology of performing long-term immersion tests in determining the degradation rates of Mg alloys was put forth. For this purpose, cast and extruded Mg-2Ag and powder pressed and sintered Mg-0.3Ca alloy systems were chosen. DMEM Glutamax +10% FBS (Fetal Bovine Serum) +1% Penicillin streptomycin was used as cell culture medium. The advantages of such a method in predicting the degradation rates in vivo deduced from in vitro experiments are discussed.

The sigh of the oppressed: The palliative effects of ideology are stronger for people living in highly unequal neighbourhoods.

PubMed

Sengupta, Nikhil K; Greaves, Lara M; Osborne, Danny; Sibley, Chris G

2017-09-01

Ideologies that legitimize status hierarchies are associated with increased well-being. However, which ideologies have 'palliative effects', why they have these effects, and whether these effects extend to low-status groups remain unresolved issues. This study aimed to address these issues by testing the effects of the ideology of Symbolic Prejudice on well-being among low- and high-status ethnic groups (4,519 Europeans and 1,091 Māori) nested within 1,437 regions in New Zealand. Results showed that Symbolic Prejudice predicted increased well-being for both groups, but that this relationship was stronger for those living in highly unequal neighbourhoods. This suggests that it is precisely those who have the strongest need to justify inequality that accrue the most psychological benefit from subscribing to legitimizing ideologies. © 2017 The British Psychological Society.

The nitrogen-vacancy colour centre in diamond

NASA Astrophysics Data System (ADS)

Doherty, Marcus W.; Manson, Neil B.; Delaney, Paul; Jelezko, Fedor; Wrachtrup, Jörg; Hollenberg, Lloyd C. L.

2013-07-01

The nitrogen-vacancy (NV) colour centre in diamond is an important physical system for emergent quantum technologies, including quantum metrology, information processing and communications, as well as for various nanotechnologies, such as biological and sub-diffraction limit imaging, and for tests of entanglement in quantum mechanics. Given this array of existing and potential applications and the almost 50 years of NV research, one would expect that the physics of the centre is well understood, however, the study of the NV centre has proved challenging, with many early assertions now believed false and many remaining issues yet to be resolved. This review represents the first time that the key empirical and ab initio results have been extracted from the extensive NV literature and assembled into one consistent picture of the current understanding of the centre. As a result, the key unresolved issues concerning the NV centre are identified and the possible avenues for their resolution are examined.

Specific issues in living donor kidney transplantation: ABO - incompatibility.

PubMed

Thaiss, Friedrich

2009-12-29

Pre-emptive living kidney transplantation is the best choice of therapy to treat patients with advanced renal insufficiency. Unfortunately in up to one third of all cases kidney donation was refused due to blood group incompatibility. Limitations in donor availability for kidney transplantation therefore require that ABO-incompatible transplantation is safely established. This has changed when a new protocol was introduced in Stockholm, Sweden, in 2001. Almost 400 ABO-incompatible transplantations have since been performed in more than 20 centers with this protocol in Europe. ABO-incompatible living kidney transplantation can now be offered to our patients with advanced kidney disease as a safe procedure. To get more insight into the role ABO-incompatible organ transplantation might play in the near future transplantation centers currently involved in these processes should share their data to answer the unresolved issues we are concerned. Copyright © 2009 Elsevier Ireland Ltd. All rights reserved.

Unresolved issues in excimer laser corneal surgery

NASA Astrophysics Data System (ADS)

Trokel, Stephen L.

1991-06-01

More than one hundred fifty clinical excimer laser units designed for corneal surgery have been developed and sold commercially. Manufacturers include Meditec Lasers in Germany, Summit Engineering, Taunton Technologies, and Visx in the United States, and Synthelabo in France. Furthermore a number of prototypes have been built in the USSR and other countries which are being investigated for their clinical use. While in the United States and Canada, substantial regulation of these devices has limited their distribution and use, sales in other parts of the world have been restricted only by market forces. Early clinical successes have created an enthusiasm for this new technology. In spite of this, substantial technical issues remain uncertain and have not been carefully studied. Indeed we have accepted certain parameters for on an almost serendipitous, empirical basis. It is a proper time to pause and consider the bases for these laser techniques.

Integrating positive psychology into health-related quality of life research.

PubMed

Park, Crystal L

2015-07-01

Positive psychology is an increasingly influential force in theory and research within psychology and many related fields, including behavioral medicine, sociology, and public health. This article aims to review the ways in which positive psychology and health-related quality of life (HRQOL) research currently interface and to suggest fruitful future directions. This article reviews the basic elements of positive psychology and provides an overview of conceptual and empirical links between positive psychology and HRQOL. The role of one central aspect of positive psychology (meaning) within HRQOL is highlighted, and unresolved issues (e.g., lack of definitional clarity) are discussed. Some research on HRQOL has taken a positive psychology perspective, demonstrating the usefulness of taking a positive psychology approach. However, many areas await integration. Once conceptual and methodological issues are resolved, positive psychology may profitably inform many aspects of HRQOL research and, perhaps, clinical interventions to promote HRQOL as well.

End of FY2014 Report - Filter Measurement System for Nuclear Material Storage Canisters (Including Altitude Correction for Filter Pressure Drop)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, Murray E.; Reeves, Kirk Patrick

2015-02-24

Two LANL FTS (Filter Test System ) devices for nuclear material storage canisters are fully operational. One is located in PF-4 ( i.e. the TA-55 FTS) while the other is located at the Radiation Protection Division’s Aerosol Engineering Facility ( i.e. the TA-3 FTS). The systems are functionally equivalent , with the TA-3 FTS being the test-bed for new additions and for resolving any issues found in the TA-55 FTS. There is currently one unresolved issue regarding the TA-55 FTS device. The canister lid clamp does not give a leak tight seal when testing the 1 QT (quart) or 2more » QT SAVY lids. An adapter plate is being developed that will ensure a correct test configuration when the 1 or 2 QT SAVY lid s are being tested .« less

Highlights of the study of energy release in flares

NASA Technical Reports Server (NTRS)

Rust, D. M.; Batchelor, D. A.

1987-01-01

From February 26 to March 1, 1979, 32 solar flare investigators attended a workshop at Cambridge, MA to define objectives and devise a scientific program for the study of energy release in flares (SERF) during the coming solar maximum. Herein, some major results of the ensuing five-year effort to observe and understand the flare energy release process and its effects (energetic particle production, coronal and chromospheric heating, electromagnetic radiations, and mass motions and ejections) are reviewed. The central issue - what processes store and release the energy liberated in flares - remains unresolved except in the most general terms (e.g., it is generally agreed that the energy is stored in sheared or stressed magnetic fields and released by field annihilation during some MHD instability). Resolving that issue is still one of the most important goals in solar physics, but the advances during the SERF program have brought it closer.

Ensemble Kalman filters for dynamical systems with unresolved turbulence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grooms, Ian, E-mail: grooms@cims.nyu.edu; Lee, Yoonsang; Majda, Andrew J.

Ensemble Kalman filters are developed for turbulent dynamical systems where the forecast model does not resolve all the active scales of motion. Coarse-resolution models are intended to predict the large-scale part of the true dynamics, but observations invariably include contributions from both the resolved large scales and the unresolved small scales. The error due to the contribution of unresolved scales to the observations, called ‘representation’ or ‘representativeness’ error, is often included as part of the observation error, in addition to the raw measurement error, when estimating the large-scale part of the system. It is here shown how stochastic superparameterization (amore » multiscale method for subgridscale parameterization) can be used to provide estimates of the statistics of the unresolved scales. In addition, a new framework is developed wherein small-scale statistics can be used to estimate both the resolved and unresolved components of the solution. The one-dimensional test problem from dispersive wave turbulence used here is computationally tractable yet is particularly difficult for filtering because of the non-Gaussian extreme event statistics and substantial small scale turbulence: a shallow energy spectrum proportional to k{sup −5/6} (where k is the wavenumber) results in two-thirds of the climatological variance being carried by the unresolved small scales. Because the unresolved scales contain so much energy, filters that ignore the representation error fail utterly to provide meaningful estimates of the system state. Inclusion of a time-independent climatological estimate of the representation error in a standard framework leads to inaccurate estimates of the large-scale part of the signal; accurate estimates of the large scales are only achieved by using stochastic superparameterization to provide evolving, large-scale dependent predictions of the small-scale statistics. Again, because the unresolved scales contain so much energy, even an accurate estimate of the large-scale part of the system does not provide an accurate estimate of the true state. By providing simultaneous estimates of both the large- and small-scale parts of the solution, the new framework is able to provide accurate estimates of the true system state.« less

CO activation pathways and the mechanism of Fischer–Tropsch synthesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ojeda, Manuel; Nabar, Rahul P.; Nilekar, Anand U.

2010-06-15

Unresolved mechanistic details of monomer formation in Fischer–Tropsch synthesis (FTS) and of its oxygen rejection routes are addressed here by combining kinetic and theoretical analyses of elementary steps on representative Fe and Co surfaces saturated with chemisorbed CO. These studies provide experimental and theoretical evidence for hydrogen-assisted CO activation as the predominant kinetically-relevant step on Fe and Co catalysts at conditions typical of FTS practice. H2 and CO kinetic effects on FTS rates and oxygen rejection selectivity (as H2O or CO2) and density functional theory estimates of activation barriers and binding energies are consistent with H-assisted CO dissociation, but notmore » with the previously accepted kinetic relevance of direct CO dissociation and chemisorbed carbon hydrogenation elementary steps. H-assisted CO dissociation removes O-atoms as H2O, while direct dissociation forms chemisorbed oxygen atoms that desorb as CO2. Direct CO dissociation routes are minor contributors to monomer formation on Fe and may become favored at high temperatures on alkali-promoted catalysts, but not on Co catalysts, which remove oxygen predominantly as H2O because of the preponderance of Hassisted CO dissociation routes. The merging of experiment and theory led to the clarification of persistent mechanistic issues previously unresolved by separate experimental and theoretical inquiries.« less

Ebola epidemic of 2014-2015: unresolved ethical issues.

PubMed

Garbuglia, Anna Rosa

2016-01-01

Some ethical aspects of the management of the Ebola epidemic in Guinea, Liberia and Sierra Leone which started in January 2014, have been questionable. First, as regards the prevention of the spread of the virus, the necessary epidemiological investigations on the origin of the infection were not carried out adequately and this did not help to curb the spread of the disease. A disparity has been observed between the western and African countries' access to the treatment of patients; this infringes on the principle of equality. This paper also focuses on how the Global Public Goods for Health principle was not fully respected in the management of the epidemic.

Light-Induced Capacitance Tunability in Ferroelectric Crystals.

PubMed

Páez-Margarit, David; Rubio-Marcos, Fernando; Ochoa, Diego A; Del Campo, Adolfo; Fernández, José F; García, José E

2018-06-25

The remote controlling of ferroic properties with light is nowadays a hot and highly appealing topic in materials science. Here, we shed light on some of the unresolved issues surrounding light-matter coupling in ferroelectrics. Our findings show that the capacitance and, consequently, its related intrinsic material property, i.e., the dielectric constant, can be reversibly adjusted through the light power control. High photodielectric performance is exhibited across a wide range of the visible light wavelength because of the wavelength-independence of the phenomenon. We have verified that this counterintuitive behavior can be strongly ascribed to the existence of "locally free charges" at domain wall.

Intermittent fasting and cardiovascular disease: current evidence and unresolved questions.

PubMed

Tinsley, Grant M; Horne, Benjamin D

2018-01-01

Intermittent fasting has produced a variety of beneficial health effects in animal models, although high-quality research in humans has been limited. This special report examines current evidences for intermittent fasting in humans, discusses issues that require further examination, and recommends new research that can improve the knowledge base in this emerging research area. While potentially useful for health improvement, intermittent fasting requires further study prior to widespread implementation for health purposes. Randomized, longer-term studies are needed to determine whether using intermittent fasting as a lifestyle rather than a diet is feasible and beneficial for the health of some members of the human population.

Magnetotail Reconnection

NASA Astrophysics Data System (ADS)

Petrukovich, A.; Artemyev, A.; Nakamura, R.

Reconnection is the key process responsible for the magnetotail dynamics. Driven reconnection in the distant tail is not sufficient to support global magnetospheric convection and the near Earth neutral line spontaneously forms to restore the balance. Mechanisms of initiation of such near-Earth magnetotail reconnection still represent one of major unresolved issues in space physics. We review the progress in this topic during the last decade. Recent theoretical advances suggest several variants of overcoming the famous tearing stability problem. Multipoint spacecraft observations reveal detailed structure of pre-onset current sheet of and reconnection zone down to ion larmor scale, supporting the importance of unstable state development through internal magnetotail reconfiguration.

From experimental systems to evolutionary biology: an impossible journey?

PubMed

Morange, Michel

2013-01-01

The historical approach to the sciences has undergone a sea change during recent decades. Maybe the major contribution of Hans-Jörg Rheinberger to this movement was his demonstration of the importance of experimental systems, and of their transformations, in the development of the sciences. To describe these transformations, Hans-Jörg borrows metaphors from evolutionary biology. I want to argue that evolutionary biologists can find in these recent historical studies plenty of models and concepts to address unresolved issues in their discipline. At a time when transdisciplinarity is highly praised, it is useful to provide a precise description of the obstacles that have so far prevented this exchange.

Methodological considerations in service use assessment for children and youth with mental health conditions; issues for economic evaluation.

PubMed

Woolderink, M; Lynch, F L; van Asselt, A D I; Beecham, J; Evers, S M A A; Paulus, A T G; van Schayck, C P

2015-05-01

Economic evaluations are increasingly used in decision-making. Accurate measurement of service use is critical to economic evaluation. This qualitative study, based on expert interviews, aims to identify best approaches to service use measurement for child mental health conditions, and to identify problems in current methods. Results suggest considerable agreement on strengths (e.g., availability of accurate instruments to measure service use) and weaknesses, (e.g., lack of unit prices for services outside the health sector) or alternative approaches to service use measurement. Experts also identified some unresolved problems, for example the lack of uniform definitions for some mental health services.

Cross-validation and hypothesis testing in neuroimaging: An irenic comment on the exchange between Friston and Lindquist et al.

PubMed

Reiss, Philip T

2015-08-01

The "ten ironic rules for statistical reviewers" presented by Friston (2012) prompted a rebuttal by Lindquist et al. (2013), which was followed by a rejoinder by Friston (2013). A key issue left unresolved in this discussion is the use of cross-validation to test the significance of predictive analyses. This note discusses the role that cross-validation-based and related hypothesis tests have come to play in modern data analyses, in neuroimaging and other fields. It is shown that such tests need not be suboptimal and can fill otherwise-unmet inferential needs. Copyright © 2015 Elsevier Inc. All rights reserved.

Controlling and policing substance use(rs).

PubMed

White, Tony

2002-01-01

Controlling drug use--a dynamic, global, politicalized process--is reviewed in terms of selected types of drugs, "natural levels" of drug demand and use, drug markets and the drug market environment, types of traffickers, illicit drug trade profits, approaches to drug control ("War on Drugs", "Zero Tolerance" programs and policies, "normalizing" and legalizing selected drugs), including UN's then relatively recent "Balanced Approach" and facets of drug law enforcement (drug prices and purity levels and values of drug seizures), including various rarely noted benefits to intervention programs and control agents. Unresolved issues and needed "tools" are noted while considering the implications of the first UN's World Drug Report data.

Knowledge-based approach for generating target system specifications from a domain model

NASA Technical Reports Server (NTRS)

Gomaa, Hassan; Kerschberg, Larry; Sugumaran, Vijayan

1992-01-01

Several institutions in industry and academia are pursuing research efforts in domain modeling to address unresolved issues in software reuse. To demonstrate the concepts of domain modeling and software reuse, a prototype software engineering environment is being developed at George Mason University to support the creation of domain models and the generation of target system specifications. This prototype environment, which is application domain independent, consists of an integrated set of commercial off-the-shelf software tools and custom-developed software tools. This paper describes the knowledge-based tool that was developed as part of the environment to generate target system specifications from a domain model.

On the linguistic status of ‘agreement’ in sign languages

PubMed Central

LILLO-MARTIN, DIANE; MEIER, RICHARD P.

2013-01-01

In signed languages, the arguments of verbs can be marked by a system of verbal modification that has been termed “agreement” (more neutrally, “directionality”). Fundamental issues regarding directionality remain unresolved and the phenomenon has characteristics that call into question its analysis as agreement. We conclude that directionality marks person in American Sign Language, and the ways person marking interacts with syntactic phenomena are largely analogous to morpho-syntactic properties of familiar agreement systems. Overall, signed languages provide a crucial test for how gestural and linguistic mechanisms can jointly contribute to the satisfaction of fundamental aspects of linguistic structure. PMID:23495262

The object and the dream: Mark Rothko.

PubMed

Turco, Ronald

2002-01-01

An exploration of unconscious determinants provides useful insights in considering Mark Rothko's creativity and behavioral characteristics. A basic focus is the issue of childhood loss and unresolved grief. The studies of Martha Wolfenstein on preadolescent and childhood parent loss are paramount in considering Rothko the man. Rothko, as a result of early losses, was predisposed to recurrent depressions and bouts of anger which created difficulties in his intimate relationships. Rothko evidenced a lifelong mistrust of male authority figures which may also account for his antipathy toward psychoanalysis. His psychological life was complicated by his experiences of institutionalized anti-Semitism which further diminished his trust in others.

Role of attentional tags in working memory-driven attentional capture.

PubMed

Kuo, Chun-Yu; Chao, Hsuan-Fu

2014-08-01

Recent studies have demonstrated that the contents of working memory capture attention when performing a visual search task. However, it remains an intriguing and unresolved question whether all kinds of items stored in working memory capture attention. The present study investigated this issue by manipulating the attentional tags (target or distractor) associated with information maintained in working memory. The results showed that working memory-driven attentional capture is a flexible process, and that attentional tags associated with items stored in working memory do modulate attentional capture. When items were tagged as a target, they automatically captured attention; however, when items were tagged as a distractor, attentional capture was reduced.

Social Media Channels in Health Care Research and Rising Ethical Issues.

PubMed

Azer, Samy A

2017-11-01

Social media channels such as Twitter, Facebook, and LinkedIn have been used as tools in health care research, opening new horizons for research on health-related topics (e.g., the use of mobile social networking in weight loss programs). While there have been efforts to develop ethical guidelines for internet-related research, researchers still face unresolved ethical challenges. This article investigates some of the risks inherent in social media research and discusses how researchers should handle challenges related to confidentiality, privacy, and consent when social media tools are used in health-related research. © 2017 American Medical Association. All Rights Reserved.

Single realization stochastic FDTD for weak scattering waves in biological random media.

PubMed

Tan, Tengmeng; Taflove, Allen; Backman, Vadim

2013-02-01

This paper introduces an iterative scheme to overcome the unresolved issues presented in S-FDTD (stochastic finite-difference time-domain) for obtaining ensemble average field values recently reported by Smith and Furse in an attempt to replace the brute force multiple-realization also known as Monte-Carlo approach with a single-realization scheme. Our formulation is particularly useful for studying light interactions with biological cells and tissues having sub-wavelength scale features. Numerical results demonstrate that such a small scale variation can be effectively modeled with a random medium problem which when simulated with the proposed S-FDTD indeed produces a very accurate result.

Single realization stochastic FDTD for weak scattering waves in biological random media

PubMed Central

Tan, Tengmeng; Taflove, Allen; Backman, Vadim

2015-01-01

This paper introduces an iterative scheme to overcome the unresolved issues presented in S-FDTD (stochastic finite-difference time-domain) for obtaining ensemble average field values recently reported by Smith and Furse in an attempt to replace the brute force multiple-realization also known as Monte-Carlo approach with a single-realization scheme. Our formulation is particularly useful for studying light interactions with biological cells and tissues having sub-wavelength scale features. Numerical results demonstrate that such a small scale variation can be effectively modeled with a random medium problem which when simulated with the proposed S-FDTD indeed produces a very accurate result. PMID:27158153

Attachment stability and the emergence of unresolved representations during adolescence.

PubMed

Aikins, Julie Wargo; Howes, Carollee; Hamilton, Claire

2009-09-01

This 15-year longitudinal study examined the stability of attachment representations from infancy to adolescence and investigated the emergence of unresolved representations during adolescence in a sample of 47 16-year-olds. Attachment was assessed at 12 months using the Strange Situation Procedure, at 4 years using the modified Strange Situation Procedure, and again at 16 years with the Adult Attachment Projective (AAP). The emergence of unresolved classifications in adolescence (AAP) was associated with higher rates of negative life events, low levels of early mother-child relationship security (an aggregate measure of the 12-month and 4-year measures), negative teacher-child relationship experiences in middle childhood, and low early adolescent friendship quality. The results support the growing body of evidence suggesting that changes in attachment are lawful, while adding to the growing understanding of the emergence of unresolved attachment representations.

Approach to Achieve High Availability in Critical Infrastructure

DTIC Science & Technology

2015-09-01

possibility of sensing temperature, vibration , noise , lubrication, and corrosion. The basis of condition-based maintenance is an accurate assessment of the... vibration would be a sign of possible issues such as misalignment or excessive wear and tear. Noise monitoring can complement the temperature sensor...Availability of good sensor Maintenance Approach Cooling systems Unobservable failure Vibration sensor TBM/CBM Blast doors Observable failure No TBM

75 FR 63060 - Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A. Model PIAGGIO P-180 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-14

... failure of engine oil dipsticks, installed on Pratt & Whitney Canada (P&WC) PT6A66 and PT6A66B engines... subsequent corrosion, can cause incorrect reading of the engine oil low level on the Refuel/Ground Test Panel. If left uncorrected, this situation could lead to in-flight engine failure(s). We are issuing this AD...

Demonstration of an Environmentally Benign and Reduced Corrosion Runway Deicing Fluid

DTIC Science & Technology

2011-01-01

ADDRESS(ES) Enviromental Security Technology Certification Program: 901 North Stuart Street, Suite 303, Arlington, Virginia 22203 10. SPONSOR...IMPLEMENTATION ISSUES Users may express concern because the Battelle-RDF is new and they may have reservations because of its potential damage to...several drivers for implementing a new , more environmentally friendly RDF. 1.3.1 Water Pollution Reduction The Clean Water Act (CWA) and its

Survey on Security Issues in Cloud Computing and Associated Mitigation Techniques

NASA Astrophysics Data System (ADS)

Bhadauria, Rohit; Sanyal, Sugata

2012-06-01

Cloud Computing holds the potential to eliminate the requirements for setting up of high-cost computing infrastructure for IT-based solutions and services that the industry uses. It promises to provide a flexible IT architecture, accessible through internet for lightweight portable devices. This would allow multi-fold increase in the capacity or capabilities of the existing and new software. In a cloud computing environment, the entire data reside over a set of networked resources, enabling the data to be accessed through virtual machines. Since these data-centers may lie in any corner of the world beyond the reach and control of users, there are multifarious security and privacy challenges that need to be understood and taken care of. Also, one can never deny the possibility of a server breakdown that has been witnessed, rather quite often in the recent times. There are various issues that need to be dealt with respect to security and privacy in a cloud computing scenario. This extensive survey paper aims to elaborate and analyze the numerous unresolved issues threatening the cloud computing adoption and diffusion affecting the various stake-holders linked to it.

State-Space Analysis of Granger-Geweke Causality Measures with Application to fMRI.

PubMed

Solo, Victor

2016-05-01

The recent interest in the dynamics of networks and the advent, across a range of applications, of measuring modalities that operate on different temporal scales have put the spotlight on some significant gaps in the theory of multivariate time series. Fundamental to the description of network dynamics is the direction of interaction between nodes, accompanied by a measure of the strength of such interactions. Granger causality and its associated frequency domain strength measures (GEMs) (due to Geweke) provide a framework for the formulation and analysis of these issues. In pursuing this setup, three significant unresolved issues emerge. First, computing GEMs involves computing submodels of vector time series models, for which reliable methods do not exist. Second, the impact of filtering on GEMs has never been definitively established. Third, the impact of downsampling on GEMs has never been established. In this work, using state-space methods, we resolve all these issues and illustrate the results with some simulations. Our analysis is motivated by some problems in (fMRI) brain imaging, to which we apply it, but it is of general applicability.

State-Space Analysis of Granger-Geweke Causality Measures with Application to fMRI

PubMed Central

Solo, Victor

2017-01-01

The recent interest in the dynamics of networks and the advent, across a range of applications, of measuring modalities that operate on different temporal scales have put the spotlight on some significant gaps in the theory of multivariate time series. Fundamental to the description of network dynamics is the direction of interaction between nodes, accompanied by a measure of the strength of such interactions. Granger causality and its associated frequency domain strength measures (GEMs) (due to Geweke) provide a framework for the formulation and analysis of these issues. In pursuing this setup, three significant unresolved issues emerge. First, computing GEMs involves computing submodels of vector time series models, for which reliable methods do not exist. Second, the impact of filtering on GEMs has never been definitively established. Third, the impact of downsampling on GEMs has never been established. In this work, using state-space methods, we resolve all these issues and illustrate the results with some simulations. Our analysis is motivated by some problems in (fMRI) brain imaging, to which we apply it, but it is of general applicability. PMID:26942749

Evidence for Unresolved Exoplanet-hosting Binaries in Gaia DR2

NASA Astrophysics Data System (ADS)

Evans, Daniel F.

2018-05-01

This note describes an effort to detect additional stellar sources in known transiting exoplanet (TEP) systems, which are unresolved or barely resolved in the Gaia Data Release 2 (DR2) catalogue. The presence of multiple unresolved stars in photometric and spectroscopic observations of a transiting planetary system biases measurements of the planet's radius, mass, and atmospheric conditions. In addition to the effect on individual planetary systems, the presence of unresolved stars across the sample of known exoplanets biases our overall understanding of planetary systems, due to the systematic underestimation of both masses and radii. This work uses the Astrometric Goodness of Fit in the Along-Scan direction (GOF_AL) and the Astrometric Excess Noise as indicators of poorly-resolved binaries. Many known close binaries in the exoplanet host star sample have highly significant GOF_AL and Astrometric Excess Noise values, such as WASP-20AB with Astrometric Excess Noise significant at $4720\\sigma$ and GOF_AL=124.

Review on stress corrosion and corrosion fatigue failure of centrifugal compressor impeller

NASA Astrophysics Data System (ADS)

Sun, Jiao; Chen, Songying; Qu, Yanpeng; Li, Jianfeng

2015-03-01

Corrosion failure, especially stress corrosion cracking and corrosion fatigue, is the main cause of centrifugal compressor impeller failure. And it is concealed and destructive. This paper summarizes the main theories of stress corrosion cracking and corrosion fatigue and its latest developments, and it also points out that existing stress corrosion cracking theories can be reduced to the anodic dissolution (AD), the hydrogen-induced cracking (HIC), and the combined AD and HIC mechanisms. The corrosion behavior and the mechanism of corrosion fatigue in the crack propagation stage are similar to stress corrosion cracking. The effects of stress ratio, loading frequency, and corrosive medium on the corrosion fatigue crack propagation rate are analyzed and summarized. The corrosion behavior and the mechanism of stress corrosion cracking and corrosion fatigue in corrosive environments, which contain sulfide, chlorides, and carbonate, are analyzed. The working environments of the centrifugal compressor impeller show the behavior and the mechanism of stress corrosion cracking and corrosion fatigue in different corrosive environments. The current research methods for centrifugal compressor impeller corrosion failure are analyzed. Physical analysis, numerical simulation, and the fluid-structure interaction method play an increasingly important role in the research on impeller deformation and stress distribution caused by the joint action of aerodynamic load and centrifugal load.

Demonstration Tokamak Hybrid Reactor (DTHR) blanket design study, December 1978

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-01-01

This work represents only the second iteration of the conceptual design of a DTHR blanket; consequently, a number of issues important to a detailed blanket design have not yet been evaluated. The most critical issues identified are those of two-phase flow maldistribution, flow instabilities, flow stratification for horizontal radial inflow of boiling water, fuel rod vibrations, corrosion of clad and structural materials by high quality steam, fretting and cyclic loads. Approaches to minimizing these problems are discussed and experimental testing with flow mock-ups is recommended. These implications on a commercial blanket design are discussed and critical data needs are identified.

An investigation of microbial diversity in crude oil & seawater injection systems and microbiologically influenced corrosion (MIC) of linepipe steels under different exposure conditions

NASA Astrophysics Data System (ADS)

AlAbbas, Faisal Mohammed

During oil and gas operations, pipeline networks are subjected to different corrosion deterioration mechanisms that result from the interaction between the fluid process and the linepipe steel. Among these mechanisms is microbiologically influenced corrosion (MIC) that results from accelerated deterioration caused by different indigenous microorganisms that naturally reside in the hydrocarbon and associated seawater injection systems. The focus of this research is to obtain comprehensive understanding of MIC. This work has explored the most essential elements (identifications, implications and mitigations) required to fully understand MIC. Advanced molecular-based techniques, including sequencing of 16S rRNA genes via 454 pyrosequencing methodologies, were deployed to provide in-depth understanding of the microbial diversity associated with crude oil and seawater injection systems and their relevant impact on MIC. Key microbes including sulfate reducing bacteria (SRB) and iron reducing bacteria (IRB) were cultivated from sour oil well field samples. The microbes' phylotypes were identified in the laboratory to gain more thorough understanding of how they impact microbial corrosion. Electrochemical and advanced surface analytical techniques were used for corrosion evaluations of linepipe carbon steels (API 5L X52 and X80) under different exposure conditions. On the identification front, 454 pyrosequencing of both 16S rRNA genes indicated that the microbial communities in the corrosion products obtained from the sour oil pipeline, sweet crude pipeline and seawater pipeline were dominated by bacteria, though archaeal sequences (predominately Methanobacteriaceae and Methanomicrobiaceae) were also identified in the sweet and sour crude oil samples, respectively. The dominant bacterial phylotypes in the sour crude sample included members of the Thermoanaerobacterales, Synergistales, and Syntrophobacterales. In the sweet crude sample, the dominant phylotypes included members of Halothiobacillaceae. In the seawater injection sample, the dominant bacterial phylotypes included members of the Rhodobacterales, Flavobacteriales and Oceanospirillales. Interestingly, common bacterial phylotypes that are related to Thermotogaceae were identified in all investigated samples. The impact of the identified microbial communities on MIC of pipeline system was presented. On the implications front, the influence of field SRB (Desulfomicrobium sp. and Clostridiales.) on the corrosion process was complex. The bacterial activities, metabolic reactions and by-products contributed to the corrosion process. Based on the observations and results, corrosion involves multiple synergistic mechanisms. The MIC vulnerability of X52 was higher than X80 due to microstructural effects. On the other hand, the field IRB consortium (Shewanella oneidensis sp. and Brevibacillus sp.) exhibited inhibitory action on the corrosion process. The maximum corrosion rate was ˜4 mpy in the biotic system and ˜18 mpy in the abiotic system. Corrosion mechanisms were proposed to explain the protective behavior of the IRB consortium. On the special effects front, the influence of remnant magnetic fields (3000 Gauss strength) on MIC by a SRB consortium was investigated. The results confirm substantial increases of bacteria cell attachment, biofilm mass, corrosion and pitting penetration rates under magnetized biotic compared to nonmagnetized biotic conditions. The significant enhancement of MIC under magnetized biotic conditions has been attributed to the synergetic interaction between SRB cells and associated metabolic products with magnetic fields. The effect of magnetic fields on the thermodynamics and kinetics of the bacterial cell attachment and the electrochemical process has been presented. On the mitigation front, this work presented a pioneer study on the inhibition effects of azadirachtin (Neem) extracts of SRB influenced corrosion. The results revealed that Neem extracts reduced the biocorrosion rate by approximately 50%. Neem significantly reduced the contribution of SRB in the corrosion process by minimizing the growth of cells, which subsequently suppressed the production of sulfide, density of sessile cells and development of biofilm. Moreover, the Neem extracts might provide an organic coating that protects the surface against the medium. The work provided by this research will expand the MIC knowledge within the oil and gas industry and will improve monitoring and prevention strategies and direct future research of MIC-related issues, such as microbial injection inhibitors aided with magnetic fields applications and environmentally friendly biocides.

Analysis of Bacterial Community Composition of Corroded Steel Immersed in Sanya and Xiamen Seawaters in China via Method of Illumina MiSeq Sequencing

PubMed Central

Li, Xiaohong; Duan, Jizhou; Xiao, Hui; Li, Yongqian; Liu, Haixia; Guan, Fang; Zhai, Xiaofan

2017-01-01

Metal corrosion is of worldwide concern because it is the cause of major economic losses, and because it creates significant safety issues. The mechanism of the corrosion process, as influenced by bacteria, has been studied extensively. However, the bacterial communities that create the biofilms that form on metals are complicated, and have not been well studied. This is why we sought to analyze the composition of bacterial communities living on steel structures, together with the influence of ecological factors on these communities. The corrosion samples were collected from rust layers on steel plates that were immersed in seawater for two different periods at Sanya and Xiamen, China. We analyzed the bacterial communities on the samples by targeted 16S rRNA gene (V3–V4 region) sequencing using the Illumina MiSeq. Phylogenetic analysis revealed that the bacteria fell into 13 phylotypes (similarity level = 97%). Proteobacteria, Firmicutes and Bacteroidetes were the dominant phyla, accounting for 88.84% of the total. Deltaproteobacteria, Clostridia and Gammaproteobacteria were the dominant classes, and accounted for 70.90% of the total. Desulfovibrio spp., Desulfobacter spp. and Desulfotomaculum spp. were the dominant genera and accounted for 45.87% of the total. These genera are sulfate-reducing bacteria that are known to corrode steel. Bacterial diversity on the 6 months immersion samples was much higher than that of the samples that had been immersed for 8 years (P < 0.001, Student’s t-test). The average complexity of the biofilms from the 8-years immersion samples from Sanya was greater than those from Xiamen, but not significantly so (P > 0.05, Student’s t-test). Overall, the data showed that the rust layers on the steel plates carried many bacterial species. The bacterial community composition was influenced by the immersion time. The results of our study will be of benefit to the further studies of bacterial corrosion mechanisms and corrosion resistance. PMID:28955315

Alloys compatibility in molten salt fluorides: Kurchatov Institute related experience

NASA Astrophysics Data System (ADS)

Ignatiev, Victor; Surenkov, Alexandr

2013-10-01

In the last several years, there has been an increased interest in the use of high-temperature molten salt fluorides in nuclear power systems. For all molten salt reactor designs, materials selection is a very important issue. This paper summarizes results, which led to selection of materials for molten salt reactors in Russia. Operating experience with corrosion thermal convection loops has demonstrated good capability of the “nickel-molybdenum alloys + fluoride salt fueled by UF4 and PuF3 + cover gas” system up to 750 °C. A brief description is given of the container material work in progress. Tellurium corrosion of Ni-based alloys in stressed and unloaded conditions studies was also tested in different molten salt mixtures at temperatures up to 700-750 °C, also with measurement of the redox potential. HN80MTY alloy with 1% added Al is the most resistant to tellurium intergranular cracking of Ni-base alloys under study.

Performance of Hydrophobisation Techniques in Case of Reinforced Concrete Structures

NASA Astrophysics Data System (ADS)

Błaszczyński, Tomasz; Osesek, Mateusz; Gwozdowski, Błażej; Ilski, Mirosław

2017-10-01

Concrete is, unchangeably, one of the most frequently applied building materials, also in the case of bridges, overpasses or viaducts. Along with the aging of such structures, the degradation of concrete, which may accelerate the corrosion of reinforcing steel and drastically decrease the load-bearing capacity of the structure, becomes an important issue. The paper analyzes the possibilities of using deep hydrophobisation in repairing reinforced concrete engineering structures. The benefits of properly securing reinforced concrete structures from the damaging effects of UV radiation, the influence of harmful gases, or progression of chlorine induced corrosion have been presented, especially in regards to bridge structures. The need to calculate the costs of carrying out investments along with the expected costs of maintaining such structures, as well as the high share of costs connected with logistics, has also been indicated in the total costs of repair works.

Alternative to Nitric Acid Passivation Project Overview

NASA Technical Reports Server (NTRS)

Lewis, Pattie L.

2013-01-01

The standard practice for protection of stainless steel is a process called passivation. This procedure results in the formation of a metal oxide layer to prevent corrosion. Typical passivation procedures call for the use of nitric acid which exhibits excellent corrosion performance; however, there are a number of environmental, worker safety, and operational issues associated with its use. The longtime military specification for the passivation of stainless steel was cancelled in favor of newer specifications which allow for the use of citric acid in place of nitric acid. Citric acid offers a variety of benefits that include increased safety for personnel, reduced environmental impact, and reduced operational costs. There have been few studies, however, to determine whether citric acid is an acceptable alternative for NASA and DoD. This paper details activities to date including development of the joint test plan, on-going and planned testing, and preliminary results.

Ab initio surface properties of Ag-Sn alloys: implications for lead-free soldering.

PubMed

Saleh, Gabriele; Xu, Chen; Sanvito, Stefano

2018-02-07

Ag and Sn are the major components of solder alloys adopted to assemble printed circuit boards. The qualities that make them the alloys of choice for the modern electronic industry are related to their physical and chemical properties. For corrosion resistance and solderability, surface properties are particularly important. Yet, atomic-level information about the surfaces of these alloys is not known. Here we fill this gap by presenting an extensive ab initio investigation of composition, energetics, structure and reactivity of Ag-Sn alloy surfaces. The structure and stability of various surfaces is evaluated, and the main factors determining the energetics of surface formation are uncovered. Oxygen and sulphur chemisorptions are studied and discussed in the framework of corrosion tendency, an important issue for printed circuit boards. Adsorption energy trends are rationalized based on the analysis of structural and electronic features.

The Corrosion and Preservation of Iron Antiques.

ERIC Educational Resources Information Center

Walker, Robert

1982-01-01

Discusses general corrosion reactions (iron to rust), including corrosion of iron, sulfur dioxide, chlorides, immersed corrosion, and underground corrosion. Also discusses corrosion inhibition, including corrosion inhibitors (anodic, cathodic, mixed, organic); safe/dangerous inhibitors; and corrosion/inhibition in concrete/marble, showcases/boxes,…

Molten Salts for High Temperature Reactors: University of Wisconsin Molten Salt Corrosion and Flow Loop Experiments -- Issues Identified and Path Forward

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piyush Sabharwall; Matt Ebner; Manohar Sohal

2010-03-01

Considerable amount of work is going on regarding the development of high temperature liquid salts technology to meet future process needs of Next Generation Nuclear Plant. This report identifies the important characteristics and concerns of high temperature molten salts (with lesson learned at University of Wisconsin-Madison, Molten Salt Program) and provides some possible recommendation for future work

The Use of Ion Vapor Deposited Aluminum (IVD) for the Space Shuttle Solid Rocket Booster (SRB)

NASA Technical Reports Server (NTRS)

Novak, Howard L.

2003-01-01

This viewgraph representation provides an overview of the use of ion vapor deposited aluminum (IVD) for use in the Space Shuttle Solid Rocket Booster (SRB). Topics considered include: schematics of ion vapor deposition system, production of ion vapor deposition system, IVD vs. cadmium coated drogue ratchets, corrosion exposure facilities and tests, seawater immersion facilities and tests and continued research and development issues.

Biological issues in materials science and engineering: Interdisciplinarity and the bio-materials paradigm

NASA Astrophysics Data System (ADS)

Murr, L. E.

2006-07-01

Biological systems and processes have had, and continue to have, important implications and applications in materials extraction, processing, and performance. This paper illustrates some interdisciplinary, biological issues in materials science and engineering. These include metal extraction involving bacterial catalysis, galvanic couples, bacterial-assisted corrosion and degradation of materials, biosorption and bioremediation of toxic and other heavy metals, metal and material implants and prostheses and related dental and medical biomaterials developments and applications, nanomaterials health benefits and toxicity issue, and biomimetics and biologically inspired materials developments. These and other examples provide compelling evidence and arguments for emphasizing biological sicences in materials science and engineering curricula and the implementation of a bio-materials paradigm to facilitate the emergence of innovative interdisciplinarity involving the biological sciences and materials sciences and engineering.

Steam generator issues in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strosnider, J.R.

1997-02-01

Alloy 600 steam generator tubes in the US have exhibited degradation mechanisms similar to those observed in other countries. Effective programs have been implemented to address several degradation mechanisms including: wastage; mechanical wear; pitting; and fatigue. These degradation mechanisms are fairly well understood as indicated by the ability to effectively mitigate/manage them. Stress corrosion cracking (SCC) is the dominant degradation mechanism in the US. SCC poses significant inspection and management challenges to the industry and the regulators. The paper also addresses issues of research into SCC, inspection programs, plugging, repair strategies, water chemistry, and regulatory control. Emerging issues in themore » US include: parent tube cracking at sleeve joints; detection and repair of circumferential cracks; free span cracking; inspection and cracking of dented regions; and severe accident analysis.« less

Structural materials issues for the next generation fission reactors

NASA Astrophysics Data System (ADS)

Chant, I.; Murty, K. L.

2010-09-01

Generation-IV reactor design concepts envisioned thus far cater to a common goal of providing safer, longer lasting, proliferation-resistant, and economically viable nuclear power plants. The foremost consideration in the successful development and deployment of Gen-W reactor systems is the performance and reliability issues involving structural materials for both in-core and out-of-core applications. The structural materials need to endure much higher temperatures, higher neutron doses, and extremely corrosive environments, which are beyond the experience of the current nuclear power plants. Materials under active consideration for use in different reactor components include various ferritic/martensitic steels, austenitic stainless steels, nickel-base superalloys, ceramics, composites, etc. This article addresses the material requirements for these advanced fission reactor types, specifically addressing structural materials issues depending on the specific application areas.

Preface

NASA Astrophysics Data System (ADS)

L'Hostis, Valérie; Foct, François; Féron, Damien

2006-11-01

The reinforced concrete is widely used in the construction of nuclear power plants, of nuclear facilities and structures for long-term storage and the disposal of radioactive waste. Indeed this kind of material is used for many purposes, including support, containment, and environmental protection for different types of facilities: e.g. surface structures, shallow subsurface vaults and deep underground repositories. These structures are required to besafe and reliable in challenging and varying environments for periods of time that can potentially range up to several hundred years. During their operational life, these structures will in all likelihood be subjected to a number of environmental stresses or ageing factors that may adversely affect their performance and result in shortened service lives. The detection and assessment of the magnitude as well as the rate of occurrence of any environmental factor-related degradation are key factors in maintaining the capability of these structures to meet their operational requirements. As the knowledge base for modern concretes, such as would be used in fuel cycle-related facilities, is relatively new (i.e. about, 100 years versus the required 200 to 500 or more years), additional inputs are required in several areas to ensure that these structures will continue to meet their design requirements throughout their operational life. Within this context, the international Workshop entitled "NUCPERF 2006, Corrosion and Long Term Performance of Concrete in NPP and Waste Facilities" (EFC Event 284) was held at Cadarache (France), on 27-30 March 2006. Its purpose was to bring together scientists and engineers from various countries that are developing nuclear power generation and/or waste disposal programmes. A special focus has been made on the discussion on R& D progress with regard to concrete degradation and corrosion of steel reinforcements in order to reach a consensus on R& D needs to further develop cooperative programmes. The sessions of the workshop covered the following areas, from fundamental aspects to technically relevant industrial applications: - Present and Future Expectations on regulations, design codes and R& D programmes; - Experimental Studies mainly focused on corrosion of embedded steels and its mechanical consequences, reactive agents transport and chemical degradation of concrete; - Phenomenological Modelling of the different mechanisms involved in reinforced concrete degradation (corrosion, transport, mechanics, etc.); - Service Life Models focused on the assessment of reinforced concrete structures and life cycle analysis; - Feedback Experience use of field experiences and archaeological artefacts for the phenomenological understanding and modelling; - Monitoring and Repair on-site corrosion evaluation, repairing techniques performance... The organisation and the success of this Workshop have been made possible thanks to CEA (Commissariat à l'Énergie Atomique) and EDF (Électricité de France) which co-organised this event. It was co-sponsored by EFC/WP4 (European Federation of Corrosion, Nuclear corrosion working party) and OECD/NEA (Nuclear Energy Agency) which the editors want to warmly thank for their active scientific and practical contributions. The editors would also like to thank the authors who presented papers of outstanding scientific content and who responded enthusiastically to the discussions and questions raised during the Workshop, the programme committee, who had to make the tricky selection of the presented papers, and finally the reviewers of the papers presented in this special issue. This Workshop was a forum to exchange state-of-the-art knowledge on corrosion and long-term performance of concrete in nuclear power plants and waste facilities. The editors hope that the scientific results gathered in these proceedings will be useful to scientists and engineers in the field of reinforced concrete materials for nuclear applications. Valérie L'Hostis, François Foct and Damien Féron Editors of this Special Issue

Research on a new type of fiber Bragg grating based corrosion sensor

NASA Astrophysics Data System (ADS)

Li, Peng; Song, Shide; Wang, Xiaona; Zhou, Weijie; Zhang, Zuocai

2015-08-01

Investigations of the corrosion of rebars in concrete structures are widely studied because of the serious damage to concrete caused by rebar corrosion. The rebar corrosion products in reinforced concrete take up 2~6 times the volume of the rebar. Based on this principle, a new type of fiber Bragg grating (FBG) corrosion sensor is proposed in this paper, which consists of two sensors, an FBG corrosion measurement sensor to measure the expansion strain caused by rebar corrosion, and a temperature compensation sensor to eliminate the cross-sensitivity of FBG corrosion sensor. The corrosion rate is derived by the wavelength shift of FBG corrosion sensor, so rebar corrosion can be monitored and assessed by the FBG wavelength shift. A customized rebar with epoxy fixing groove is designed to install a corrosion sensor on its surface and an embedded temperature compensation sensor. The corrosion sensor is embedded in cement mortar and subsequently casted in concrete. The performance of the corrosion sensor is studied in an accelerated electrochemical corrosion test. Experimental results show that the new type of corrosion sensor has advantage of relatively large measurement range of corrosion rate. The corrosion sensor is suitable to monitor slightly and moderately corroded rebars.

Synergy effect of naphthenic acid corrosion and sulfur corrosion in crude oil distillation unit

NASA Astrophysics Data System (ADS)

Huang, B. S.; Yin, W. F.; Sang, D. H.; Jiang, Z. Y.

2012-10-01

The synergy effect of naphthenic acid corrosion and sulfur corrosion at high temperature in crude oil distillation unit was studied using Q235 carbon-manganese steel and 316 stainless steel. The corrosion of Q235 and 316 in corrosion media containing sulfur and/or naphthenic acid at 280 °C was investigated by weight loss, scanning electron microscope (SEM), EDS and X-ray diffractometer (XRD) analysis. The results showed that in corrosion media containing only sulfur, the corrosion rate of Q235 and 316 first increased and then decreased with the increase of sulfur content. In corrosion media containing naphthenic acid and sulfur, with the variations of acid value or sulfur content, the synergy effect of naphthenic acid corrosion and sulfur corrosion has a great influence on the corrosion rate of Q235 and 316. It was indicated that the sulfur accelerated naphthenic acid corrosion below a certain sulfur content but prevented naphthenic acid corrosion above that. The corrosion products on two steels after exposure to corrosion media were investigated. The stable Cr5S8 phases detected in the corrosion products film of 316 were considered as the reason why 316 has greater corrosion resistance to that of Q235.

28 CFR 42.610 - Agency enforcement of unresolved complaints.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 1 2014-07-01 2014-07-01 false Agency enforcement of unresolved complaints. 42.610 Section 42.610 Judicial Administration DEPARTMENT OF JUSTICE NONDISCRIMINATION; EQUAL EMPLOYMENT OPPORTUNITY; POLICIES AND PROCEDURES Procedures for Complaints of Employment Discrimination Filed...

The Nature of the Unresolved Extragalactic Cosmic Soft X-Ray Background

NASA Technical Reports Server (NTRS)

Cappelluti, N.; Ranalli, P.; Roncarelli, M.; Arevalo, P.; Zamorani, G.; Comastri, A.; Gilli, R.; Rovilos, E.; Vignali, C.; Allevato, V.;

Design of alumina forming FeCrAl steels for lead or lead-bismuth cooled fast reactors

NASA Astrophysics Data System (ADS)

Lim, Jun; Hwang, Il Soon; Kim, Ji Hyun

2013-10-01

Iron-chromium-aluminum alloys containing 15-20 wt.% Cr and 4-6 wt.% Al have shown excellent corrosion resistance in the temperature range up to 600 °C or higher in liquid lead and lead-bismuth eutectic environments by the formation of protective Al2O3 layers. However, the higher Cr and Al concentrations in ferritic alloys could be problematic because of severe embrittlement in the manufacturing process as well as in service, caused by the formation of brittle phases. For this reason, efforts worldwide have so far mainly focused on the development of aluminizing surface treatments. However, aluminizing surface treatments have major disadvantages of cost, processing difficulties and reliability issues. In this study, a new FeCrAl alloy is proposed for structural materials in lead and lead-bismuth cooled nuclear applications. The alloy design relied on corrosion experiments in high temperature lead and lead-bismuth eutectic environments and computational thermodynamic calculations using the commercial software, JMatPro. The design of new alloys has focused on the optimization of Cr and Al levels for the formation of an external Al2O3 layer which can provide excellent oxidation and corrosion resistance in liquid lead alloys in the temperature range 300-600 °C while still retaining workable mechanical properties.

On the Determination of Magnesium Degradation Rates under Physiological Conditions

PubMed Central

Nidadavolu, Eshwara Phani Shubhakar; Feyerabend, Frank; Ebel, Thomas; Willumeit-Römer, Regine; Dahms, Michael

2016-01-01

The current physiological in vitro tests of Mg degradation follow the procedure stated according to the ASTM standard. This standard, although useful in predicting the initial degradation behavior of an alloy, has its limitations in interpreting the same for longer periods of immersion in cell culture media. This is an important consequence as the alloy’s degradation is time dependent. Even if two different alloys show similar corrosion rates in a short term experiment, their degradation characteristics might differ with increased immersion times. Furthermore, studies concerning Mg corrosion extrapolate the corrosion rate from a single time point measurement to the order of a year (mm/y), which might not be appropriate because of time dependent degradation behavior. In this work, the above issues are addressed and a new methodology of performing long-term immersion tests in determining the degradation rates of Mg alloys was put forth. For this purpose, cast and extruded Mg-2Ag and powder pressed and sintered Mg-0.3Ca alloy systems were chosen. DMEM Glutamax +10% FBS (Fetal Bovine Serum) +1% Penicillin streptomycin was used as cell culture medium. The advantages of such a method in predicting the degradation rates in vivo deduced from in vitro experiments are discussed. PMID:28773749

High power vertical stacked and horizontal arrayed diode laser bar development based on insulation micro-channel cooling (IMCC) and hard solder bonding technology

NASA Astrophysics Data System (ADS)

Wang, Boxue; Jia, Yangtao; Zhang, Haoyu; Jia, Shiyin; Liu, Jindou; Wang, Weifeng; Liu, Xingsheng

2018-02-01

An insulation micro-channel cooling (IMCC) has been developed for packaging high power bar-based vertical stack and horizontal array diode lasers, which eliminates many issues caused in its congener packaged by commercial copper formed micro-channel cooler(MCC), such as coefficient of thermal expansion (CTE) mismatch between cooler and diode laser bar, high coolant quality requirement (DI water) and channel corrosion and electro-corrosion induced by DI water if the DI-water quality is not well maintained The IMCC cooler separates water flow route and electrical route, which allows tap-water as coolant without electro-corrosion and therefore prolongs cooler lifetime dramatically and escalated the reliability of these diode lasers. The thickness of ceramic and copper in an IMCC cooler is well designed to minimize the CTE mismatch between laser bar and cooler, consequently, a very low "SMILE" of the laser bar can be achieved for small fast axis divergence after collimation. In additional, gold-tin hard solder bonding technology was also developed to minimize the risk of solder electromigration at high current density and thermal fatigue under hard-pulse operation mode. Testing results of IMCC packaged diode lasers are presented in this report.

Chexal-Horowitz flow-accelerated corrosion model -- Parameters and influences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chexal, V.K.; Horowitz, J.S.

1995-12-01

Flow-accelerated corrosion (FAC) continues to cause problems in nuclear and fossil power plants. Thinning caused by FAC has lead to many leaks and complete ruptures. These failures have required costly repairs and occasionally have caused lengthy shutdowns. To deal with FAC, utilities have instituted costly inspection and piping replacement programs. Typically, a nuclear unit will inspect about 100 large bore piping components plus additional small bore components during every refueling outage. To cope with FAC, there has been a great deal of research and development performed to obtain a greater understanding of the phenomenon. Currently, there is general agreement onmore » the mechanism of FAC. This understanding has lead to the development of computer based tools to assist utility engineers in dealing with this issue. In the United States, the most commonly used computer program to predict and control is CHECWORKS{trademark}. This paper presents a description of the mechanism of FAC, and introduces the predictive algorithms used in CHECWORKS{trademark}. The parametric effects of water chemistry, materials, flow and geometry as predicted by CHECWORKS{trademark} will then be discussed. These trends will be described and explained by reference to the corrosion mechanism. The remedial actions possible to reduce the rate of damage caused by FAC will also be discussed.« less

Large-scale outflows in luminous QSOs revisited. The impact of beam smearing on AGN feedback efficiencies

NASA Astrophysics Data System (ADS)

Husemann, B.; Scharwächter, J.; Bennert, V. N.; Mainieri, V.; Woo, J.-H.; Kakkad, D.

2016-10-01

Context. Feedback from active galactic nuclei (AGN) is thought to play an important role in quenching star formation in galaxies. However, the efficiency with which AGN dissipate their radiative energy into the ambient medium remains strongly debated. Aims: Enormous observational efforts have been made to constrain the energetics of AGN feedback by mapping the kinematics of the ionized gas on kpc scale. We study how the observed kinematics and inferred energetics are affected by beam smearing of a bright unresolved narrow-line region (NLR) due to seeing. Methods: We re-analyse optical integral-field spectroscopy of a sample of twelve luminous unobscured quasi-stellar objects (QSOs) (0.4

Quasi parton distributions and the gradient flow

DOE PAGES

Monahan, Christopher; Orginos, Kostas

2017-03-22

We propose a new approach to determining quasi parton distribution functions (PDFs) from lattice quantum chromodynamics. By incorporating the gradient flow, this method guarantees that the lattice quasi PDFs are finite in the continuum limit and evades the thorny, and as yet unresolved, issue of the renormalization of quasi PDFs on the lattice. In the limit that the flow time is much smaller than the length scale set by the nucleon momentum, the moments of the smeared quasi PDF are proportional to those of the lightfront PDF. Finally, we use this relation to derive evolution equations for the matching kernelmore » that relates the smeared quasi PDF and the light-front PDF.« less

Quasi parton distributions and the gradient flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monahan, Christopher; Orginos, Kostas

We propose a new approach to determining quasi parton distribution functions (PDFs) from lattice quantum chromodynamics. By incorporating the gradient flow, this method guarantees that the lattice quasi PDFs are finite in the continuum limit and evades the thorny, and as yet unresolved, issue of the renormalization of quasi PDFs on the lattice. In the limit that the flow time is much smaller than the length scale set by the nucleon momentum, the moments of the smeared quasi PDF are proportional to those of the lightfront PDF. Finally, we use this relation to derive evolution equations for the matching kernelmore » that relates the smeared quasi PDF and the light-front PDF.« less

For Richer, for Poorer: Money as a Topic of Marital Conflict in the Home

PubMed Central

Papp, Lauren M.; Cummings, E. Mark; Goeke-Morey, Marcie C.

2011-01-01

Guided by a family stress perspective, we examined the hypothesis that discussing money would be associated with the handling of marital conflict in the home. Analyses were based on dyadic hierarchical linear modeling of 100 husbands’ and 100 wives’ diary reports of 748 conflict instances. Contrary to findings from previous laboratory-based surveys, spouses did not rate money as the most frequent source of marital conflict in the home. However, compared to non-money issues, marital conflicts about money were more pervasive, problematic, and recurrent, and remained unresolved, despite including more attempts at problem solving. Implications for professionals who assist couples in managing their relationships and family finances are discussed. PMID:22162622

Tornadogenesis via squall line and supercell interaction revisited - The 15 November 1989 Huntsville tornado

NASA Technical Reports Server (NTRS)

Goodman, Steven J.; Knupp, Kevin R.

1990-01-01

A case study analyzing the environmental setting and storm system morphology that provides observational evidence of a mechanism involving the interaction of a gust front with a preexisting mesocyclone is presented. This case serves to reemphasize the existence of a high conditional probability of tornado occurrence, given the merger of a gust front (or storm outflow) with a moderate to strong thunderstorm ahead of it. The resultant data serve to illustrate some important unresolved issues relevant to the severe weather warning system that involve the present and planned local warning and network radars, and future algorithms that might intelligently integrate other data sources and models with the radar data.

Tungsten dust remobilization under steady-state and transient plasma conditions

DOE PAGES

Ratynskaia, S.; Tolias, P.; De Angeli, M.; ...

2016-11-22

Remobilization is one of the most prominent unresolved fusion dust-relevant issues, strongly related to the lifetime of dust in plasma-wetted regions, the survivability of dust on hot plasma-facing surfaces and the formation of dust accumulation sites. A systematic cross-machine study has been initiated to investigate the remobilization of tungsten micron-size dust from tungsten surfaces implementing a newly developed technique based on controlled pre-adhesion by gas dynamics methods. It has been utilized in a number of devices and has provided new insights on remobilization under steady-state and transient conditions. In conclusion, the experiments are interpreted with contact mechanics theory and heatmore » conduction models.« less

History of cardiopulmonary bypass (CPB).

PubMed

Hessel, Eugene A

2015-06-01

The development of cardiopulmonary bypass (CPB), thereby permitting open-heart surgery, is one of the most important advances in medicine in the 20th century. Many currently practicing cardiac anesthesiologists, cardiac surgeons, and perfusionists are unaware of how recently it came into use (60 years) and how much the practice of CPB has changed during its short existence. In this paper, the development of CPB and the many changes and progress that has taken place over this brief period of time, making it a remarkably safe endeavor, are reviewed. The many as yet unresolved questions are also identified, which sets the stage for the other papers in this issue of this journal. Copyright © 2015 Elsevier Ltd. All rights reserved.

Thermal, dynamic and compositional aspects of the core-forming Earth

NASA Technical Reports Server (NTRS)

Stevenson, D. J.

1985-01-01

Core formation is the most important and singular differentiation event in the history of a terrestrial planet. It almost certainly involved the downward migration of a partially or wholly molten iron alloy through a silicate and oxide mantle, and was contemporaneous with accretion. Several important, unresolved issues which have implications for mantle and core geochemistry, the thermal history of the Earth, and the origin of geomagnetism are addressed: whether the early Earth was molten; whether core formation involved low or high pressure geochemistry, or both; early Earth mantle homogenization; whether equilibration established between core forming material and the mantle through which it migrated; and how much iron is stranded and unable to reach the core.

Perspective: Composition–structure–property mapping in high-throughput experiments: Turning data into knowledge

DOE PAGES

Hattrick-Simpers, Jason R.; Gregoire, John M.; Kusne, A. Gilad

2016-05-26

With their ability to rapidly elucidate composition-structure-property relationships, high-throughput experimental studies have revolutionized how materials are discovered, optimized, and commercialized. It is now possible to synthesize and characterize high-throughput libraries that systematically address thousands of individual cuts of fabrication parameter space. An unresolved issue remains transforming structural characterization data into phase mappings. This difficulty is related to the complex information present in diffraction and spectroscopic data and its variation with composition and processing. Here, we review the field of automated phase diagram attribution and discuss the impact that emerging computational approaches will have in the generation of phase diagrams andmore » beyond.« less

For Richer, for Poorer: Money as a Topic of Marital Conflict in the Home.

PubMed

Papp, Lauren M; Cummings, E Mark; Goeke-Morey, Marcie C

2009-02-01

Guided by a family stress perspective, we examined the hypothesis that discussing money would be associated with the handling of marital conflict in the home. Analyses were based on dyadic hierarchical linear modeling of 100 husbands' and 100 wives' diary reports of 748 conflict instances. Contrary to findings from previous laboratory-based surveys, spouses did not rate money as the most frequent source of marital conflict in the home. However, compared to non-money issues, marital conflicts about money were more pervasive, problematic, and recurrent, and remained unresolved, despite including more attempts at problem solving. Implications for professionals who assist couples in managing their relationships and family finances are discussed.

Multijunction cells for concentrators: Technology prospects

NASA Technical Reports Server (NTRS)

Ferber, R. R. (Compiler); Costogue, E. N. (Compiler); Shimada, K. (Compiler)

1984-01-01

Development of high-efficiency multijunction solar cells for concentrator applications is a key step in achieving the goals of the U.S. Department of Energy National Photovoltaics Program. This report summarizes findings of an issue study conducted by the Jet Propulsion Laboratory Photovoltaic Analysis and Integration Center, with the assistance of the Solar Energy Research Institute and Sandia National laboratoies, which surveyed multijunction cell research for concentrators undertaken by federal agencies and by private industry. The team evaluated the potentials of research activities sponsored by DOE and by corporate funding to achieve projected high-efficiency goals and developed summary statements regarding industry expectations. Recommendations are made for the direction of future work to address specific unresolved aspects of multijunction cell technology.

USMC Ground Surveillance Robot (GSR): Lessons Learned

NASA Astrophysics Data System (ADS)

Harmon, S. Y.

1987-02-01

This paper describes the design of an autonomous vehicle and the lessons learned during the implementation of that complex robot. The major problems encountered to which solutions were found include sensor processing bandwidth limitations, coordination of the interactions between major subsystems, sensor data fusion and system knowledge representation. Those problems remaining unresolved include system complexity management, the lack of powerful system monitoring and debugging tools, exploratory implementation of a complex system and safety and testing issues. Many of these problems arose from working with underdeveloped and continuously evolving technology and will probably be resolved as the technological resources mature and stabilize. Unfortunately, other problems will continue to plague developers throughout the evolution of autonomous system technology.

Pediatric surgeons and anesthesiologists expand the dialogue on the neurotoxicity question, rationale for early and delayed surgeries, and practice changes while awaiting definitive evidence.

PubMed

Byrne, Mary W; Casale, Pasquale; Garzon, Maria; Hyman, Joshua E; Lin, Albert Y; Lynch, Lisa R; Schleien, Charles L; Stylianos, Steven

2014-10-01

The Pediatric Anesthesia NeuroDevelopment Assessment team at Columbia University Medical Center Department of Anesthesiology convened its fourth biennial Symposium to address unresolved issues concerning potential neurotoxic effects of anesthetic agents and sedatives on young children and to assess study findings to date. Dialogue initiated at the third Symposium was continued between anesthesiologists, researchers, and a panel of expert pediatric surgeons representing general surgery and dermatology, orthopedic, and urology specialties. The panel explored the need to balance benefits of early surgery using improved technologies against potential anesthetic risks, practice changes while awaiting definitive answers, and importance of continued interprofessional dialogue.

The Oxford Questions on the foundations of quantum physics

PubMed Central

Briggs, G. A. D.; Butterfield, J. N.; Zeilinger, A.

2013-01-01

The twentieth century saw two fundamental revolutions in physics—relativity and quantum. Daily use of these theories can numb the sense of wonder at their immense empirical success. Does their instrumental effectiveness stand on the rock of secure concepts or the sand of unresolved fundamentals? Does measuring a quantum system probe, or even create, reality or merely change belief? Must relativity and quantum theory just coexist or might we find a new theory which unifies the two? To bring such questions into sharper focus, we convened a conference on Quantum Physics and the Nature of Reality. Some issues remain as controversial as ever, but some are being nudged by theory's secret weapon of experiment. PMID:24062626

Wind shear detection. Forward-looking sensor technology

NASA Technical Reports Server (NTRS)

Bracalente, E. M. (Compiler); Delnore, V. E. (Compiler)

1987-01-01

A meeting took place at NASA Langley Research Center in February 1987 to discuss the development and eventual use of forward-looking remote sensors for the detection and avoidance of wind shear by aircraft. The participants represented industry, academia, and government. The meeting was structured to provide first a review of the current FAA and NASA wind shear programs, then to define what really happens to the airplane, and finally to give technology updates on the various types of forward-looking sensors. This document is intended to informally record the essence of the technology updates (represented here through unedited duplication of the vugraphs used), and the floor discussion following each presentation. Also given are key issues remaining unresolved.

The Oxford Questions on the foundations of quantum physics.

PubMed

Briggs, G A D; Butterfield, J N; Zeilinger, A

2013-09-08

The twentieth century saw two fundamental revolutions in physics-relativity and quantum. Daily use of these theories can numb the sense of wonder at their immense empirical success. Does their instrumental effectiveness stand on the rock of secure concepts or the sand of unresolved fundamentals? Does measuring a quantum system probe, or even create, reality or merely change belief? Must relativity and quantum theory just coexist or might we find a new theory which unifies the two? To bring such questions into sharper focus, we convened a conference on Quantum Physics and the Nature of Reality. Some issues remain as controversial as ever, but some are being nudged by theory's secret weapon of experiment.

Simulation of the human-telerobot interface on the Space Station

NASA Technical Reports Server (NTRS)

Stuart, Mark A.; Smith, Randy L.

1993-01-01

Many issues remain unresolved concerning the components of the human-telerobot interface presented in this work. It is critical that these components be optimally designed and arranged to ensure, not only that the overall system's goals are met, but but that the intended end-user has been optimally accommodated. With sufficient testing and evaluation throughout the development cycle, the selection of the components to use in the final telerobotic system can promote efficient, error-free performance. It is recommended that whole-system simulation with full-scale mockups be used to help design the human-telerobot interface. It is contended that the use of simulation can facilitate this design and evaluation process.

Detecting unresolved binary stars in Euclid VIS images

NASA Astrophysics Data System (ADS)

Kuntzer, T.; Courbin, F.

2017-10-01

Measuring a weak gravitational lensing signal to the level required by the next generation of space-based surveys demands exquisite reconstruction of the point-spread function (PSF). However, unresolved binary stars can significantly distort the PSF shape. In an effort to mitigate this bias, we aim at detecting unresolved binaries in realistic Euclid stellar populations. We tested methods in numerical experiments where (I) the PSF shape is known to Euclid requirements across the field of view; and (II) the PSF shape is unknown. We drew simulated catalogues of PSF shapes for this proof-of-concept paper. Following the Euclid survey plan, the objects were observed four times. We propose three methods to detect unresolved binary stars. The detection is based on the systematic and correlated biases between exposures of the same object. One method is a simple correlation analysis, while the two others use supervised machine-learning algorithms (random forest and artificial neural network). In both experiments, we demonstrate the ability of our methods to detect unresolved binary stars in simulated catalogues. The performance depends on the level of prior knowledge of the PSF shape and the shape measurement errors. Good detection performances are observed in both experiments. Full complexity, in terms of the images and the survey design, is not included, but key aspects of a more mature pipeline are discussed. Finding unresolved binaries in objects used for PSF reconstruction increases the quality of the PSF determination at arbitrary positions. We show, using different approaches, that we are able to detect at least binary stars that are most damaging for the PSF reconstruction process. The code corresponding to the algorithms used in this work and all scripts to reproduce the results are publicly available from a GitHub repository accessible via http://lastro.epfl.ch/software

Microencapsulation Technology for Corrosion Mitigation by Smart Coatings

NASA Technical Reports Server (NTRS)

Buhrow, Jerry; Li, Wenyan; Jolley, Scott; Calle, Luz M.

2011-01-01

A multifunctional, smart coating for the autonomous control of corrosion is being developed based on micro-encapsulation technology. Corrosion indicators as well as corrosion inhibitors have been incorporated into microcapsules, blended into several paint systems, and tested for corrosion detection and protection effectiveness. This paper summarizes the development, optimization, and testing of microcapsules specifically designed to be incorporated into a smart coating that will deliver corrosion inhibitors to mitigate corrosion autonomously. Key words: smart coating, corrosion inhibition, microencapsulation, microcapsule, pH sensitive microcapsule, corrosion inhibitor, corrosion protection pain

Modelling turbulent boundary layer flow over fractal-like multiscale terrain using large-eddy simulations and analytical tools.

PubMed

Yang, X I A; Meneveau, C

2017-04-13

In recent years, there has been growing interest in large-eddy simulation (LES) modelling of atmospheric boundary layers interacting with arrays of wind turbines on complex terrain. However, such terrain typically contains geometric features and roughness elements reaching down to small scales that typically cannot be resolved numerically. Thus subgrid-scale models for the unresolved features of the bottom roughness are needed for LES. Such knowledge is also required to model the effects of the ground surface 'underneath' a wind farm. Here we adapt a dynamic approach to determine subgrid-scale roughness parametrizations and apply it for the case of rough surfaces composed of cuboidal elements with broad size distributions, containing many scales. We first investigate the flow response to ground roughness of a few scales. LES with the dynamic roughness model which accounts for the drag of unresolved roughness is shown to provide resolution-independent results for the mean velocity distribution. Moreover, we develop an analytical roughness model that accounts for the sheltering effects of large-scale on small-scale roughness elements. Taking into account the shading effect, constraints from fundamental conservation laws, and assumptions of geometric self-similarity, the analytical roughness model is shown to provide analytical predictions that agree well with roughness parameters determined from LES.This article is part of the themed issue 'Wind energy in complex terrains'. © 2017 The Author(s).

Explicit Global Simulation of Gravity Waves up to the Lower Thermosphere

NASA Astrophysics Data System (ADS)

Becker, E.

2016-12-01

At least for short-term simulations, middle atmosphere general circulation models (GCMs) can be run with sufficiently high resolution in order to describe a good part of the gravity wave spectrum explicitly. Nevertheless, the parameterization of unresolved dynamical scales remains an issue, especially when the scales of parameterized gravity waves (GWs) and resolved GWs become comparable. In addition, turbulent diffusion must always be parameterized along with other subgrid-scale dynamics. A practical solution to the combined closure problem for GWs and turbulent diffusion is to dispense with a parameterization of GWs, apply a high spatial resolution, and to represent the unresolved scales by a macro-turbulent diffusion scheme that gives rise to wave damping in a self-consistent fashion. This is the approach of a few GCMs that extend from the surface to the lower thermosphere and simulate a realistic GW drag and summer-to-winter-pole residual circulation in the upper mesosphere. In this study we describe a new version of the Kuehlungsborn Mechanistic general Circulation Model (KMCM), which includes explicit (though idealized) computations of radiative transfer and the tropospheric moisture cycle. Particular emphasis is spent on 1) the turbulent diffusion scheme, 2) the attenuation of resolved GWs at critical levels, 3) the generation of GWs in the middle atmosphere from body forces, and 4) GW-tidal interactions (including the energy deposition of GWs and tides).

Study on Corrosion-induced Crack Initiation and Propagation of Sustaining Loaded RCbeams

NASA Astrophysics Data System (ADS)

Zhong, X. P.; Li, Y.; Yuan, C. B.; Yang, Z.; Chen, Y.

2018-05-01

For 13 pieces of reinforced concrete beams with HRB500 steel bars under long-term sustained loads, at time of corrosion-induced initial crack of concrete, and corrosion-induced crack widths of 0.3mm and 1mm, corrosion of steel bars and time-varying behavior of corrosion-induced crack width were studied by the ECWD (Electro-osmosis - constant Current – Wet and Dry cycles) accelerated corrosion method. The results show that when cover thickness was between 30 and 50mm,corrosion rates of steel bars were between 0.8% and 1.7% at time of corrosion-induced crack, and decreased with increasing concrete cover thickness; when corrosion-induced crack width was 0.3mm, the corrosion rate decreased with increasing steel bar diameter, and increased with increasing cover thickness; its corrosion rate varied between 0.98% and 4.54%; when corrosion-induced crack width reached 1mm, corrosion rate of steel bars was between 4% and 4.5%; when corrosion rate of steel bars was within 5%, the maximum and average corrosion-induced crack and corrosion rate of steel bars had a good linear relationship. The calculation model predicting the maximum and average width of corrosion-induced crack is given in this paper.

Accelerated Degradation Test and Predictive Failure Analysis of B10 Copper-Nickel Alloy under Marine Environmental Conditions

PubMed Central

Sun, Bo; Ye, Tianyuan; Feng, Qiang; Yao, Jinghua; Wei, Mumeng

2015-01-01

This paper studies the corrosion behavior of B10 copper-nickel alloy in marine environment. Accelerated degradation test under marine environmental conditions was designed and performed based on the accelerated testing principle and the corrosion degradation mechanism. With the prolongation of marine corrosion time, the thickness of Cu2O film increased gradually. Its corrosion product was Cu2(OH)3Cl, which increased in quantity over time. Cl− was the major factor responsible for the marine corrosion of copper and copper alloy. Through the nonlinear fitting of corrosion rate and corrosion quantity (corrosion weight loss), degradation data of different corrosion cycles, the quantitative effects of two major factors, i.e., dissolved oxygen (DO) and corrosion medium temperature, on corrosion behavior of copper alloy were analyzed. The corrosion failure prediction models under different ambient conditions were built. One-day corrosion weight loss under oxygenated stirring conditions was equivalent to 1.31-day weight loss under stationary conditions, and the corrosion rate under oxygenated conditions was 1.31 times higher than that under stationary conditions. In addition, corrosion medium temperature had a significant effect on the corrosion of B10 copper sheet. PMID:28793549

Accelerated Degradation Test and Predictive Failure Analysis of B10 Copper-Nickel Alloy under Marine Environmental Conditions.

PubMed

Sun, Bo; Ye, Tianyuan; Feng, Qiang; Yao, Jinghua; Wei, Mumeng

2015-09-10

This paper studies the corrosion behavior of B10 copper-nickel alloy in marine environment. Accelerated degradation test under marine environmental conditions was designed and performed based on the accelerated testing principle and the corrosion degradation mechanism. With the prolongation of marine corrosion time, the thickness of Cu₂O film increased gradually. Its corrosion product was Cu₂(OH)₃Cl, which increased in quantity over time. Cl - was the major factor responsible for the marine corrosion of copper and copper alloy. Through the nonlinear fitting of corrosion rate and corrosion quantity (corrosion weight loss), degradation data of different corrosion cycles, the quantitative effects of two major factors, i.e. , dissolved oxygen (DO) and corrosion medium temperature, on corrosion behavior of copper alloy were analyzed. The corrosion failure prediction models under different ambient conditions were built. One-day corrosion weight loss under oxygenated stirring conditions was equivalent to 1.31-day weight loss under stationary conditions, and the corrosion rate under oxygenated conditions was 1.31 times higher than that under stationary conditions. In addition, corrosion medium temperature had a significant effect on the corrosion of B10 copper sheet.

Searching for Unresolved Binary Brown Dwarfs

NASA Astrophysics Data System (ADS)

Albretsen, Jacob; Stephens, Denise

2007-10-01

There are currently L and T brown dwarfs (BDs) with errors in their classification of +/- 1 to 2 spectra types. Metallicity and gravitational differences have accounted for some of these discrepancies, and recent studies have shown unresolved binary BDs may offer some explanation as well. However limitations in technology and resources often make it difficult to clearly resolve an object that may be binary in nature. Stephens and Noll (2006) identified statistically strong binary source candidates from Hubble Space Telescope (HST) images of Trans-Neptunian Objects (TNOs) that were apparently unresolved using model point-spread functions for single and binary sources. The HST archive contains numerous observations of BDs using the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) that have never been rigorously analyzed for binary properties. Using methods developed by Stephens and Noll (2006), BD observations from the HST data archive are being analyzed for possible unresolved binaries. Preliminary results will be presented. This technique will identify potential candidates for future observations to determine orbital information.

Modeling and Prediction of Corrosion-Fatigue Failures in AF1410 Steel Test Specimens

DTIC Science & Technology

2009-01-12

PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Structures Division, Code 4.3.3 University of Dayton Research Bldg. 2187 Room 2340A Institute Naval...AND ADDRESS(ES) Office of Naval Research One Liberty Center 875 North Randolph St., Suite 1425 Arlington, VA 22203-1995 11. SPONSOR/MONITOR’S...costs. To address these issues, NAVAIR has initiated a multiyear research program to investigate and quantify the fatigue life reduction due to

Cadmium Replacements for High Strength Steel Fasteners

DTIC Science & Technology

2005-03-01

w/o corr expos – strippability (MIL-S-5002D) [fstnr & pnl] • bend test after coating reapplication • stress durability (ISO 15330) @ 96 hr before...Immersion Paint Adhesion -----45 washersGalvanic Bi-Metallic Corrosion Strippability Stress Durability Fatigue COF Torque Tension Breakaway Torque Paint...Patrick Doyle (NAWCADLKE) • Selected Issues – Zn vs Cad as control – Grade 8 (150 ksi) vs 180 ksi or 220 ksi fasteners – Use of dry film lubricants

A call for theory to support the use of causal-formative indicators: A commentary on Bollen and Diamantopoulos (2017).

PubMed

Hardin, Andrew

2017-09-01

In this issue, Bollen and Diamantopoulos (2017) defend causal-formative indicators against several common criticisms leveled by scholars who oppose their use. In doing so, the authors make several convincing assertions: Constructs exist independently from their measures; theory determines whether indicators cause or measure latent variables; and reflective and causal-formative indicators are both subject to interpretational confounding. However, despite being a well-reasoned, comprehensive defense of causal-formative indicators, no single article can address all of the issues associated with this debate. Thus, Bollen and Diamantopoulos leave a few fundamental issues unresolved. For example, how can researchers establish the reliability of indicators that may include measurement error? Moreover, how should researchers interpret disturbance terms that capture sources of influence related to both the empirical definition of the latent variable and to the theoretical definition of the construct? Relatedly, how should researchers reconcile the requirement for a census of causal-formative indicators with the knowledge that indicators are likely missing from the empirically estimated latent variable? This commentary develops 6 related research questions to draw attention to these fundamental issues, and to call for future research that can lead to the development of theory to guide the use of causal-formative indicators. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Care at End of Life Influences Grief: A Nationwide Long-Term Follow-Up among Young Adults Who Lost a Brother or Sister to Childhood Cancer.

PubMed

Lövgren, Malin; Sveen, Josefin; Nyberg, Tommy; Eilegård Wallin, Alexandra; Prigerson, Holly G; Steineck, Gunnar; Kreicbergs, Ulrika

2018-02-01

A majority of cancer-bereaved siblings report long-term unresolved grief, thus it is important to identify factors that may contribute to resolving their grief. To identify modifiable or avoidable family and care-related factors associated with unresolved grief among siblings two to nine years post loss. This is a nationwide Swedish postal survey. Study-specific questions and the standardized instrument Hospital Anxiety and Depression Scale. Primary outcome was unresolved grief, and family and care-related factors were used as predictors. Cancer-bereaved sibling (N = 174) who lost a brother/sister to childhood cancer during 2000-2007 in Sweden (participation rate 73%). Seventy-three were males and 101 females. The age of the siblings at time of loss was 12-25 years and at the time of the survey between 19 and 33 years. Several predictors for unresolved grief were identified: siblings' perception that it was not a peaceful death [odds ratio (OR): 9.86, 95% confidence interval (CI): 2.39-40.65], limited information given to siblings the last month of life (OR: 5.96, 95% CI: 1.87-13.68), information about the impending death communicated the day before it occurred (OR: 2.73, 95% CI: 1.02-7.33), siblings' avoidance of the doctors (OR: 3.22, 95% CI: 0.75-13.76), and lack of communication with family (OR: 2.86, 95% CI: 1.01-8.04) and people outside the family about death (OR: 5.07, 95% CI: 1.64-15.70). Depressive symptoms (OR: 1.27, 95% CI: 1.12-1.45) and time since loss (two to four years: OR: 10.36, 95% CI: 2.87-37.48 and five to seven years: OR: 8.36, 95% CI: 2.36-29.57) also predicted unresolved grief. Together, these predictors explained 54% of the variance of unresolved grief. Siblings' perception that it was not a peaceful death and poor communication with family, friends, and healthcare increased the risk for unresolved grief among the siblings.

Classification of spatially unresolved objects

NASA Technical Reports Server (NTRS)

Nalepka, R. F.; Horwitz, H. M.; Hyde, P. D.; Morgenstern, J. P.

1972-01-01

A proportion estimation technique for classification of multispectral scanner images is reported that uses data point averaging to extract and compute estimated proportions for a single average data point to classify spatial unresolved areas. Example extraction calculations of spectral signatures for bare soil, weeds, alfalfa, and barley prove quite accurate.

Qualitative and quantitative assessment of Unresolved Complex Mixture in PM2.5 of Bakersfield, CA.

EPA Science Inventory

The 2010 CalNex (California Nexus) field experiment offered an opportunity for detailed characterization of atmospheric particulate carbon composition and sources in Bakersfield, CA. In the current study, the authors describe and employ a new protocol for reporting unresolved com...

A Multifunctional Coating for Autonomous Corrosion Control

NASA Technical Reports Server (NTRS)

Calle, Luz M.; Li, Wenyan; Buhrow, Jerry W.; Jolley, Scott t.

2011-01-01

Nearly all metals and their alloys are subject to corrosion that causes them to lose their structural integrity or other critical functionality. Protective coatings are the most commonly used method of corrosion control. However, progressively stricter environmental regulations have resulted in the ban of many commercially available corrosion protective coatings due to the harmful effects of their solvents or corrosion inhibitors. This work concerns the development of a multifunctional smart coating for the autonomous control of corrosion. This coating is being developed to have the inherent ability to detect the chemical changes associated with the onset of corrosion and respond autonomously to indicate it and control it. The multi-functionality of the coating is based on microencapsulation technology specifically designed for corrosion control applications. This design has, in addition to all the advantages of existing microcapsulation designs, the corrosion controlled release function that triggers the delivery of corrosion indicators and inhibitors on demand, only when and where needed. Microencapsulation of self-healing agents for autonomous repair of mechanical damage to the coating is also being pursued. Corrosion indicators, corrosion inhibitors, as well as self-healing agents, have been encapsulated and dispersed into several paint systems to test the corrosion detection, inhibition, and self-healing properties of the coating. Key words: Corrosion, coating, autonomous corrosion control, corrosion indication, corrosion inhibition, self-healing coating, smart coating, multifunctional coating, microencapsulation.

Hexavalent Chrome Free Coatings for Electronics Applications: Joint Test Report

NASA Technical Reports Server (NTRS)

Kessel, Kurt

2012-01-01

Regardless of the corrosivity of the environment, all metals require periodic maintenance activity to guard against the insidious effects of corrosion and thus ensure that alloys meet or exceed design or performance life. The standard practice for protecting metallic substrates is the application of a coating system. Applied coating systems work via a variety of methods (barrier, galvanic, and/or inhibitor) and adhere to the substrate through a combination of chemical and physical bonds. For years hexavalent chromium has been a widely used element within applied coating systems because of its self healing and corrosion resistant properties. Occupational Safety and Health Administration (OSHA) studies have concluded that hexavalent chromium (hex chrome) is carcinogenic and poses significant risk to human health. On May 5, 2011 amendments to the Defense Federal Acquisition Regulation Supplement (DFARS) were issued in the Federal Register. Subpart 223.73 prohibits contracts from requiring hexavalent chromium in deliverables unless certain exceptions apply. These exceptions include authorization from a general or flag officer and members of the Senior Executive Service from a Program Executive Office, and unmodified legacy systems. Otherwise, Subpart 252.223-7008 provides the contract clause prohibiting contractors from using or delivering hexavalent chromium in a concentration greater than 0.1 percent by weight for all new contracts and to be included down to subcontractors for supplies, maintenance and repair services, and construction materials. National Aeronautics and Space Administration (NASA), Department of Defense (DoD), and industry stakeholders continue to search for alternatives to hex chrome in coatings applications that meet their performance requirements in corrosion protection, cost, operability, and health and safety, while typically specifying that performance must be equal to or greater than existing systems.

Investigating pitting in X65 carbon steel using potentiostatic polarisation

NASA Astrophysics Data System (ADS)

Mohammed, Sikiru; Hua, Yong; Barker, R.; Neville, A.

2017-11-01

Although pitting corrosion in passive materials is generally well understood, the growth of surface pits in actively-corroding materials has received much less attention to date and remains poorly understood. One of the key challenges which exists is repeatedly and reliably generating surface pits in a practical time-frame in the absence of deformation and/or residual stress so that studies on pit propagation and healing can be performed. Another pertinent issue is how to evaluate pitting while addressing general corrosion in low carbon steel. In this work, potentiostatic polarisation was employed to induce corrosion pits (free from deformation or residual stress) on actively corroding X65 carbon steel. The influence of applied potential (50 mV, 100 mV and 150 mV vs open circuit potential) was investigated over 24 h in a CO2-saturated, 3.5 wt.% NaCl solution at 30 °C and pH 3.8. Scanning electron microscopy (SEM) was utilised to examine pits, while surface profilometry was conducted to measure pit depth as a function of applied potential over the range considered. Analyses of light pitting (up to 120 μm) revealed that pit depth increased linearly with increase in applied potential. This paper relates total pit volume (measured using white light interferometry) to dissipated charge or total mass loss (using the current response for potentiostatic polarisation in conjunction with Faraday's law). By controlling the potential of the surface (anodic) the extent of pitting and general corrosion could be controlled. This allowed pits to be evaluated for their ability to continue to propagate after the potentiostatic technique was employed. Linear growth from a depth of 70 μm at pH 3.8, 80 °C was demonstrated. The technique offers promise for the study of inhibition of pitting.

Ultra-High Temperature Steam Corrosion of Complex Silicates for Nuclear Applications: A Computational Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rashkeev, Sergey N.; Glazoff, Michael V.; Tokuhiro, Akira

2014-01-01

Stability of materials under extreme conditions is an important issue for safety of nuclear reactors. Presently, silicon carbide (SiC) is being studied as a cladding material candidate for fuel rods in boiling-water and pressurized water-cooled reactors (BWRs and PWRs) that would substitute or modify traditional zircaloy materials. The rate of corrosion of the SiC ceramics in hot vapor environment (up to 2200 degrees C) simulating emergency conditions of light water reactor (LWR) depends on many environmental factors such as pressure, temperature, viscosity, and surface quality. Using the paralinear oxidation theory developed for ceramics in the combustion reactor environment, we estimatedmore » the corrosion rate of SiC ceramics under the conditions representing a significant power excursion in a LWR. It was established that a significant time – at least 100 h – is required for a typical SiC braiding to significantly degrade even in the most aggressive vapor environment (with temperatures up to 2200 °C) which is possible in a LWR at emergency condition. This provides evidence in favor of using the SiC coatings/braidings for additional protection of nuclear reactor rods against off-normal material degradation during power excursions or LOCA incidents. Additionally, we discuss possibilities of using other silica based ceramics in order to find materials with even higher corrosion resistance than SiC. In particular, we found that zircon (ZrSiO4) is also a very promising material for nuclear applications. Thermodynamic and first-principles atomic-scale calculations provide evidence of zircon thermodynamic stability in aggressive environments at least up to 1535 degrees C.« less