An original micro-CT study and meta-analysis of the internal and external anatomy of maxillary molars - implications for endodontic treatment.

PubMed

Tomaszewska, Iwona M; Jarzębska, Anna; Skinningsrud, Bendik; Pękala, Przemysław A; Wroński, Sebastian; Iwanaga, Joe

2018-05-07

The aim of this work was to conduct a radiological micro-CT study and meta-analysis to determine the morphological features of the root canal anatomy of the maxillary molars. The radiological study included micro-CT scans of 110 maxillary first molars and 98 maxillary second molars. To identify articles eligible for inclusion in our meta-analysis, PubMed, Embase, and Web of Science were search comprehensively. The following data were extracted: study type (cadaveric, intraoperative or imaging), Vertucci types of canal configuration, presence/number of canals, roots, apical foramina, apical deltas, and inter-canal communications. The mesiobuccal root was the most variable with respect to canal configuration, type I being the most common configuration followed by type II and type IV. Type I was the most common canal configuration in the distobuccal and palatal root. Regarding the number of canals in the maxillary first and second molars, one canal was most prevalent in all roots of the three molars, except for the mesiobuccal root of maxillary first molar, in which two canals were most prevalent. The most prevalent number of roots in all maxillary molars was three. Knowledge of endodontic anatomy determines the parameters of root canal treatment and significantly affects the probability of success. It is therefore especially important to know the morphology of the root canal system in order to perform endodontic treatment correctly. This article is protected by copyright. All rights reserved. © 2018 Wiley Periodicals, Inc.

Management of a maxillary first molar having atypical anatomy of two roots diagnosed using cone beam computed tomography.

PubMed

Sharma, Sarang; Mittal, Meenu; Passi, Deepak; Grover, Shibani

2015-01-01

Most often, a clinician working on maxillary first molar when anticipates an aberration thinks of an extra canal but rarely does he preempt fewer canals. Maxillary first molar is a tooth, which has been extensively reviewed with respect to its external and internal morphology. Abundant literature related to its anatomy is available, but reports on incidence of two roots and two root canals in maxillary first molar are very limited. Here, a case of maxillary first molar is presented that had two roots: one palatal root with Type I canal configuration and one bulbous fused buccal root with Type V canal configuration; a unique root and canal configuration not seen in any of the earlier reported cases. Diagnosis of root canal aberrancy and subsequently, accurate management of the tooth was greatly facilitated by cone beam computed tomography (CBCT) scan. The relevance of CBCT in improving treatment prognosis is greatly emphasized in this report.

Dilemmas pertaining to three canals in the mesiobuccal root of a maxillary second molar: a case report.

PubMed

Arora, Ankit; Acharya, Shashi Rashmi; Saraswathi, Muliya Vidya; Sharma, Padmaja; Ather, Amber

2013-08-01

The mesiobuccal root of the maxillary molars is well known to pose a hindrance during endodontic therapy. Presented here is a case of a maxillary left second molar where three canals were located in its mesiobuccal root with the use of visual and diagnostic aids. Difficulties encountered during the process of unveiling the tooth's internal anatomy were discussed. The dilemmas encountered pertained to the root canal configuration, the nomenclature of the extra canals, and the justification for the presence of a third canal. The root canal configuration of 3-2-1 was confirmed for the mesiobuccal root using information gained from clinical, radiographic, and multi-detector computed tomography (MDCT) scan findings. This case demonstrates the need for efforts to locate extra canals in the mesiobuccal root of the maxillary molars as their internal anatomy remains a mystery.

Treatment of a Four-Rooted Maxillary Second Molar Detected with Cone-Beam Computed Tomography

PubMed Central

Mohammadzade Akhlaghi, Nahid

2017-01-01

The significance of clinician’s knowledge about root canal anatomy and its possible variations cannot be overlooked. In some cases, taking advantage of complementary imaging techniques can help achieve a perfect flawless endodontic treatment. This article reports endodontic management of a second maxillary molar that had an uncommon anatomy of the chamber floor. After obtaining a cone-beam computed tomography (CBCT) image, the presence of a second palatal root was confirmed. All four roots were treated and patient’s symptoms were resolved. PMID:29104601

Severe incisor resorption by impacted maxillary canines: case report and literature review.

PubMed

Nute, S J

2004-11-01

This paper reviews the literature relating to incisor resorption caused by impacted maxillary canines, and describes the presentation and management of a patient with unusually severe early resorption. This case highlights the need for careful monitoring of maxillary canine eruption for all paediatric patients.

Drainage of the maxillary sinus: a comparative anatomy study in humans and goats.

PubMed

Ford, Rebecca L; Barsam, Alon; Velusami, Prabhu; Ellis, Harold

2011-02-01

The maxillary sinuses are the most frequently infected paranasal sinuses in humans. It has been suggested that infection occurs relatively commonly in the maxillary sinuses owing to the position of their ostia high on their superomedial walls, which may be suboptimal for natural drainage. This may represent evolutionary lag, whereby the ostia remained in a quadrupedal position as bipedal humans evolved from their primate ancestors. This study examined the hypothesis that drainage of the maxillary sinus is optimal in the quadrupedal position. The drainage of the human maxillary sinus and an analogous quadruped, the goat, was examined and compared in the upright, quadrupedal, and intermediate positions. Department of Anatomy, King's College London. Cadaveric human and goat maxillary sinuses were filled with saline in each position and the volume at which saline overflowed through the ostia was noted. Volume at which spontaneous drainage occurred through ostia. The volume of saline instilled before drainage was maximal in the upright position and reduced with each increase in anterior tilt, with drainage occurring most easily at 90° for both human and goat sinuses. Drainage was significantly better in the quadrupedal head position than upright in both species (p < .01). This study demonstrated that human maxillary sinuses exhibit better passive drainage through their ostia when tilted anteriorly to mimic a quadrupedal head position. This may be an example of an evolutionary lag phenomenon and could be one etiologic factor in the prevalence of maxillary sinusitis in humans.

Atypical anatomy of maxillary second premolar with three roots and four canals

PubMed Central

Izaz, Shaik; Mandava, Pragna; Bolla, Nagesh; Dasari, Bhargavi

2017-01-01

Knowledge and understanding the anatomical configuration of individual tooth play a significant role in success of endodontic treatment, in addition to through debridement and obturation of the canals. The canal anatomy of maxillary second premolar has been studied extensively, and the presence of a significant variety of multirooted canals is relatively rare in it. A 27-year-old female reported with a chief complaint of pain in her upper right posterior region for 10 days. On intraoral hard tissue examination, ill-defined access preparation was seen in maxillary right second premolar with exposed pulp. An intraoral periapical radiograph reveals radiolucency involving the pulp space and varied morphology in the same tooth. The occurrence of three roots with four canals in the maxillary second premolar is rare and not documented in the literature so far. This case report describes the nonsurgical endodontic management of such varied anatomical configuration using cone beam computed tomography as an evaluating diagnostic tool. PMID:29386789

Maxillary first molar with five canals

PubMed Central

Umer, Fahad

2014-01-01

Root canal treatment is a technically demanding procedure especially in the case of maxillary first molar where the anatomy is extremely variable. Failure to recognise and treat these variations may lead to unpredictable outcomes. This case report describes non-surgical endodontic treatment of a maxillary first molar with two palatal and two mesiobuccal canals. It also highlights the need for good anatomical knowledge of root canal morphology and its variations in order to achieve consistently successful results. PMID:25239993

Le Fort I Maxillary Advancement Using Distraction Osteogenesis

PubMed Central

Combs, Patrick D.; Harshbarger, Raymond J.

2014-01-01

Treatment of maxillary hypoplasia has traditionally involved conventional Le Fort I osteotomies and advancement. Advancements of greater than 10 mm risk significant relapse. This risk is greater in the cleft lip and palate population, whose anatomy and soft tissue scarring from prior procedures contributes to instability of conventional maxillary advancement. Le Fort I advancement with distraction osteogenesis has emerged as viable, stable treatment modality correction of severe maxillary hypoplasia in cleft, syndromic, and noncleft patients. In this article, the authors provide a review of current data and recommendations concerning Le Fort I advancement with distraction osteogenesis. In addition, they outline their technique for treating severe maxillary hypoplasia with distraction osteogenesis using internal devices. PMID:25383054

Unusual Synchronous Presentation of Maxillary Sinus Fibrosarcoma and Gemistocytic Astrocytoma with a Complication Called Leukocytoclastic Vasculitis: A Case Report

PubMed Central

Cadir, Bilge; Karahan, Nermin; Nasir, Serdar; Aydin, M. Asim; Turkaslan, S. Suha

2009-01-01

Fibrosarcoma of the paranasal sinuses is extremely rare pathology and there is limited report in the literature. We report synchronous presentation of maxillary sinus fibrosarcoma and gemistocytic astrocytoma which is, to our knowledge, unique in the literature. Both tumors metastases to other organ rarely and the metastatic spread of gemistocytic astrocytoma to fibrosarcoma or vice versa have also not been reported in the literature yet. This report discusses the clinical course of the disease, outcome of the treatment approach and survival as well as an unusual occurrence of leukocytoclastic vasculitis during the course of radiotherapy in such unusual presentation. PMID:19756200

A Review on Root Anatomy and Canal Configuration of the Maxillary Second Molars

PubMed Central

Ghasemi, Negin; Rahimi, Saeed; Shahi, Shahriar; Samiei, Mohammad; Frough Reyhani, Mohammad; Ranjkesh, Bahram

2017-01-01

Introduction: The complexity of the root canal system presents a challenge for the practitioner. This systematic review evaluated the papers published in the field of root canal anatomy and configuration of the root canal system in permanent maxillary second molars. Methods and Materials: All articles related to the root morphology and root canal anatomy of the permanent maxillary second molars were collected by suitable keywords from PubMed database. The exhaustive search included all publications from 1981 to December 2015. The articles relevant to the study were evaluated and data was extracted. The author/year of publication, country, number of the evaluated teeth, type of study (method of the evaluation), number of roots and the canals, type of canals and the morphology of the apical foramen was noted. Results: The highest studied populations were in Brazil and United States. A total of 116 related papers were found, which had investigated 11945 teeth in total. Across all the studied populations, the three-rooted anatomy was most common, while the four-rooted anatomy had the lowest prevalence. The presence of the second mesiobuccal canal ranged from 11.53 % to 93.7%, where type II (2-1) configuration was the predominant type in Brazil and USA and types II and III (1-2-1) in Chinese populations. In 8.8-44% of cases, fusion was observed. The main reported cases were related to palatal root. The major method of anatomical investigation in case reports was periapical radiography, and the chief method in morphological studies was CBCT. Conclusion: The clinicians should be aware of normal morphology and anatomic variations to reduce the treatment failure. PMID:28179915

Clinical recommendation for treatment planning of sinus augmentation procedures by using presurgical CAT scan images: a preliminary report.

PubMed

Kutkut, Ahmad M; Andreana, Sebastiano; Kim, Hyeong-Ll; Monaco, Edward

2011-12-01

To propose a clinical recommendation based on anatomy of maxillary sinus before sinus augmentation procedure using presurgical computerized axial tomography (CAT) scan images. CAT scan images were randomly selected from previous completed implant cases. Proposed area for the lateral window osteotomy was outlined on the panorex image of the CAT scan. Sagittal section on the CAT scan that was in the center of the outlined window was selected for sinus measurement analysis. On CAT scan, 2 lines were drawn to measure the dimensions of sinus. One line measured the horizontal width and the other line measured the vertical height. Based on the measurement data, a classification of the maxillary sinus anatomy was proposed. Narrow sinus cavity indicates favorable type anatomy in terms of bone regeneration healing and wide sinus cavity as less favorable anatomy for patient treatment planning. A narrow sinus and greater exposure to the blood supply should require shorter healing times after grafting. Conversely, wider sinus cavities and less exposure to the blood supply would require a longer healing time before implant placement.

Dens invaginatus in primary maxillary molar: a rare case report and review of literature.

PubMed

Bansal, Arpana V; Bansal, Abhinav; Kulkarni, Vinaya Kumar; Dhar, Reema Sharma

2012-05-01

Dens invaginatus is a rare developmental anomaly. It is unusual to find this anomaly in primary dentition. Diagnosis of this dens invaginatus is important due to possible pulpal involvement. Not only that, simultaneous presence of other dental anomaly may require long-term treatment planning. Dens invaginatus can be detected clinically in the tooth presenting unusual crown morphology or radiographically as radiopacity within tooth. This article describes one of the first case reports of dens invaginatus in primary maxillary second molar in a 5-year-old female patient. How to cite this article: Bansal AV, Bansal A, Kulkarni VK, Dhar RS. Dens Invaginatus in Primary Maxillary Molar: A Rare Case Report and Review of Literature. Int J Clin Pediatr Dent 2012;5(2):139-141.

Endodontic management of maxillary first molar with atypical canal morphology: Report of three cases

PubMed Central

Sherwani, Osama Adeel Khan; Kapoor, Bhumika; Sharma, Rajat; Mishra, Surendra Kumar

2016-01-01

Maxillary first molar with three roots and 3–4 canals is a common occurrence. However, extreme variations in their canal morphology have been reported ranging from one single canal and one root to as many as eight root canals. This article presents three cases of successful endodontic management of maxillary first molars with atypical canal morphologies, thus highlighting the fact that variations do occur and an endodontist should always be aware of aberrancies in root canal system apart from the knowledge of normal root canal anatomy. PMID:27994427

The History and Evolution of Internal Maxillary Artery Bypass.

PubMed

Wang, Long; Cai, Li; Lu, Shuaibin; Qian, Hai; Lawton, Michael T; Shi, Xiang'en

2018-05-01

Internal maxillary artery (IMA) bypass has gained momentum in the last 5 years for the treatment of complex cerebrovascular disorders and skull base tumors. However, some issues regarding this treatment modality have been proposed. As one of the most experienced neurosurgical teams to perform internal maxillary artery bypass in the world (>100 clinical cases), we reviewed the literature in aspects of basic anatomy of maxillary artery with its variations to the lateral pterygoid muscle, initial anastomosis modalities, and subsequent exposure techniques in cadaver studies, preoperative arterial evaluation methods, optimal interposed graft selections, and surgical outcome in the management of complex aneurysms, skull base tumors, and steno-occlusive disorders. Copyright © 2018 Elsevier Inc. All rights reserved.

Conservative Management of Dens Evaginatus: Report of Two Unusual Cases

PubMed Central

Vijaykumar, S; Tenny, J; Ravi, GR

2010-01-01

ABSTRACT Dens evaginatus (DE) is a rare developmental anomaly characterized by presence of an extra cusp arising from occlusal or lingual surfaces. Isolated occurrence or concomitant presence of DE with other dental anomalies has been reported. DE commonly affects permanent teeth and is rarely seen in primary dentition. Treatment may be conservative or radical. This article presents two unusual cases of concomitant occurrence of a supernumerary tooth and DE affecting maxillary deciduous lateral incisor and conservative management of DE occurring concurrently with a possible Oehler’s type I invagination in maxillary permanent lateral incisor. PMID:27507925

Evolution of the paranasal sinuses' anatomy through the ages

PubMed Central

Mavrodi, Alexandra

2013-01-01

Previously, anatomists considered paranasal sinuses as a mysterious region of the human skull. Historically, paranasal sinuses were first identified by ancient Egyptians and later, by Greek physicians. After a long period of no remarkable improvement in the understanding of anatomy during the Middle Ages, anatomists of the Renaissance period-Leonardo da Vinci and Vesalius-made their own contribution. Nathaniel Highmore's name is also associated with the anatomy of paranasal sinuses as he was first to describe the maxillary sinus. PMID:24386595

Maxillary first molar with three buccal roots evaluated with cone-beam computed tomography: a rare case report.

PubMed

Kottoor, Jojo; Nandini, Suresh; Velmurugan, Natanasabapathy

2012-01-01

This case report describes the nonsurgical endodontic management of a maxillary first molar with the unusual morphology of three separate buccal roots. An accurate assessment of this morphology was made with the help of cone-beam computed tomography (CBCT). This report also describes the varied root morphology associated with maxillary first molars and the role of CBCT as a diagnostic tool for managing these complex cases successfully.

Unusually large complex odontoma in maxillary sinus associated with unerupted tooth. Report of case and review of literature.

PubMed

Singer, Steven R; Mupparapu, Muralidhar; Milles, Maano; Rinaggio, Joseph; Pisano, Dominic; Quaranta, Patrick

2007-01-01

An unusual case of a large complex odontoma with an associated impacted tooth is presented. Odontomas are hamartomatous growths of enamel, dentin, cementum and pulp tissue. Although they are usually tooth-sized or smaller, occasionally, the complex variant can exhibit considerable growth, as was seen in the case presented here. It occupied most of the maxillary sinus and displaced the floor of the orbit and the medial and posterior walls of the left maxillary sinus. Panoramic radiographs, as well as axial and coronal CT studies, showed the extent of the lesion in various dimensions. A differential diagnosis of various calcifying tumors was formulated on the basis of these findings. The lesion was surgically excised, and histologic analysis confirmed the radiographic impression. Although odontomas of this magnitude are rare, this case demonstrates the value of imaging, radiographic histopathologic diagnosis and surgical treatment planning prior to any definitive treatment.

Equine nasal and paranasal sinus tumours. Part 1: review of the literature and tumour classification.

PubMed

Head, K W; Dixon, P M

1999-05-01

The normal gross and histological anatomy of the equine nasal and paranasal sinuses are reviewed and the relationships between the local anatomy, the occurrence of different tumour types, and of tumour spread are examined. The histological classification of the more common equine sinonasal tumours and tumour-like lesions are discussed. Clinical and pathological descriptions of 50 more recently recorded such tumours are separately tabulated. The literature shows that equine sinonasal tumours, both endemic and sporadic, are relatively uncommon in horses, with non-neoplastic growths such as maxillary (sinus) cysts, progressive ethmoid haematoma and inflammatory nasal polyps more commonly recorded. The equine paranasal sinuses, especially the caudal maxillary sinus, are the most common sites for sinonasal tumours and, in contrast to other species, primary nasal tumours are uncommon. The more common tumour types include squamous cell carcinoma that, in some cases, arise in the oral cavity and spread to the maxillary sinuses; adenocarcinomas; bone and dental tumours; fibrosarcomas and haemangiosarcomas. Except for some benign bone tumours, there are few records of successful treatment of equine sinonasal tumours.

Interrelationships in the Variability of Root Canal Anatomy among the Permanent Teeth: A Full-Mouth Approach by Cone-Beam CT

PubMed Central

Peters, Ove A.; Maury, Elisabeth; Telmon, Norbert; Georgelin-Gurgel, Marie; Maret, Delphine

2016-01-01

Objectives In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The aim of this study was to assess using CBCT acquisitions regarding whether one root canal anatomy of a tooth is associated with a specific anatomy of another tooth. Methods A total of 106 CBCT acquisitions were obtained using a CBCT scanner with 200μm voxel size. Numbers of roots and canals of the entire dentition were described. Bivariate analyses and logistic regressions were conducted to explore root canal anatomy on one tooth according to age, gender, jaw, side and the others teeth. Multiple correspondence analysis (MCA) was performed to correlate the different numbers of canals profiles. Results A total of 2424 teeth were analyzed. Independently from the other variables, the presence of an additional root canal on a mandibular incisor increases the risk of having an additional root canal on a mandibular premolar (OR [95%] 3.7 [1.0;13.2]). The mandibular molar variability increases in women compared to men (OR [95%] 0.4 [0.1; 0.9]). MCA showed correspondence between 2-canals maxillary incisor and canines and 5-canals maxillary molars, and some correlation between additional canal on maxillary and mandibular premolars. Conclusions Although CBCT examinations are conducted in the first intention of making a diagnosis or prognostic evaluation, medium FOV acquisitions could be used as an initial database thus furnishing preliminary evaluations and information. In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The visualization of all canals is considered essential in endodontic therapy. The use of multi-correspondence analysis for statistics in endodontic research is a new approach as a prognostic tool. PMID:27764246

A new anatomically based nomenclature for the roots and root canals-part 1: maxillary molars.

PubMed

Kottoor, Jojo; Albuquerque, Denzil Valerian; Velmurugan, Natanasabapathy

2012-01-01

Numerous terminologies have been employed in the dental literature to describe the roots and root canal systems of maxillary molars. This multiplicity in naming of roots and canals makes the reader susceptible to misinterpretation and confusion. No consensus thus far has been arrived at for defining the names of roots and root canals in maxillary molars, including their various morphological aberrations. The anatomical relation of roots and their root canals were identified and were subsequently named based on definite sets of criteria. A new method for identification and naming of roots and root canal anatomy in maxillary molars, based on their root and canal relationship, was formulated and is presented in this paper. The nomenclature makes certain essential modifications to the traditional approach to accommodate naming of the various aberrations presented in the maxillary molars. A simple, yet extensive, nomenclature system has been proposed that appropriately names the internal and external morphology of maxillary molars.

Characteristics of Teeth: A Review of Size, Shape, Composition, and Appearance of Maxillary Anterior Teeth.

PubMed

McGowan, Steve

2016-03-01

Although digital technologies play an increasingly integral role in dentistry, there remains a need for dental professionals to understand the fundamentals of tooth anatomy, form, occlusion, and color science. In this article, the size, shape, composition, and appearance of maxillary anterior teeth will be discussed from esthetic and functional perspectives. A total of 600 extracted maxillary incisors were studied: 200 each of central incisors, lateral incisors, and cuspids. The purpose of the article is to exhibit and discuss factors that make teeth unique and diverse. Understanding these aspects of teeth aids dental professionals in more effectively creating realistic and highly esthetic restorations for patients.

The Use of a Novel Approach for the Instrumentation of a Cone-beam Computed Tomography-discernible Lateral Canal in an Unusual Maxillary Incisor: Case Report.

PubMed

Chaniotis, Antonis; Filippatos, Christos G

2017-06-01

Lateral and apical ramifications of the main root canal create potential pathways through which bacteria can spread and remain unaffected by treatment procedures. It is a challenge for the specialty to find techniques that can predictably reach, disinfect, and obturate these ramifications. Here, we report the use of a novel instrumentation approach to aid in the negotiation and management of a lateral canal discernible on cone-beam computed tomography (CBCT) in an unusual maxillary central incisor. A 23-year-old female patient was referred for evaluation and possible treatment of tooth 9. The periapical radiographic examination revealed pulp chamber obliteration, existence of a lateral lesion, and a possible complex internal root canal anatomy. The CBCT evaluation revealed the existence of a lateral lesion, a periapical lesion, an additional distopalatal canal, and a lateral canal exiting at the lateral lesion. The diagnosis of asymptomatic apical and lateral periodontitis of tooth 9 was reached. CBCT-aided access cavity preparation and scouting resulted in the successful negotiation of all canals, main and lateral. A novel instrumentation technique with precurved controlled memory files was used for the mechanical preparation of the lateral canal to a 25/04 enlargement. Obturaton of the lateral canal was achieved with a single gutta-percha cone and AH Plus Root Canal Sealer. At the 2-year follow-up, the patient was asymptomatic, and the 2-dimensional radiographic examinations revealed resolution of both the periapical and the lateral lesions. This case report describes the application of a novel instrumentation technique for the mechanical debridement of an infected lateral canal discernible on CBCT and reinforces the importance of treating the root canals as systems that possesses anatomic intricacies that need to be addressed. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Maxillary first molar with an O-shaped root morphology: report of a case.

PubMed

Shin, Yooseok; Kim, Yemi; Roh, Byoung-Duck

2013-12-01

This case report is to present a maxillary first molar with one O-shaped root, which is an extended C-shaped canal system. Patient with chronic apical periodontitis in maxillary left first molar underwent replantation because of difficulty in negotiating all canals. Periapical radiographs and cone-beam computed tomography (CBCT) were taken. All roots were connected and fused to one root, and all canals seemed to be connected to form an O-shape. The apical 3 mm of the root were resected and retrograde filled with resin-modified glass ionomer. Intentional replantation as an alternative treatment could be considered in a maxillary first molar having an unusual O-shaped root.

A Rare Bilateral Presentation of Multiple Dens Invaginatus, Shovel-Shaped Incisor and Talon Cusp With Mesiodens.

PubMed

Hegde, S; Jain, M; Shubha, A B

2014-01-01

The aim of this paper is to describe a unique and unusual case of concomitant appearance of morphological dental anomalies in the maxillary anterior region, along with its management in a patient with no systemic abnormality. This case report describes the clinical and radiographic features of talon cusp, dens invaginatus, shovel-shaped incisors and a supernumerary tooth occurring in a single patient, which is a rare presentation. All 4 permanent maxillary incisors had dens invaginatus, the permanent maxillary canines showed the presence of talon cusps, the permanent maxillary central incisors were shovel-shaped and an erupted mesiodens was also observed. Treatment included restorative, surgical and orthodontic approaches.

Marker-free registration for the accurate integration of CT images and the subject's anatomy during navigation surgery of the maxillary sinus

PubMed Central

Kang, S-H; Kim, M-K; Kim, J-H; Park, H-K; Park, W

2012-01-01

Objective This study compared three marker-free registration methods that are applicable to a navigation system that can be used for maxillary sinus surgery, and evaluated the associated errors, with the aim of determining which registration method is the most applicable for operations that require accurate navigation. Methods The CT digital imaging and communications in medicine (DICOM) data of ten maxillary models in DICOM files were converted into stereolithography file format. All of the ten maxillofacial models were scanned three dimensionally using a light-based three-dimensional scanner. The methods applied for registration of the maxillofacial models utilized the tooth cusp, bony landmarks and maxillary sinus anterior wall area. The errors during registration were compared between the groups. Results There were differences between the three registration methods in the zygoma, sinus posterior wall, molar alveolar, premolar alveolar, lateral nasal aperture and the infraorbital areas. The error was smallest using the overlay method for the anterior wall of the maxillary sinus, and the difference was statistically significant. Conclusion The navigation error can be minimized by conducting registration using the anterior wall of the maxillary sinus during image-guided surgery of the maxillary sinus. PMID:22499127

Utilizing the GentleWave® System for Debridement of Undetected Apical Anatomy.

PubMed

Ford, Michael W

2018-03-01

Debriding and disinfecting complex anatomies within the root canal system pose a major challenge during root canal therapy. Even with current chemomechanical techniques, debris and bacterial remnants are commonly left behind, which are generally believed to increase the risk of endodontic failure. This case details the use of a new technique to debride complex apical anatomy in a maxillary molar. A 48-year-old female presented to the clinic with a chief complaint of increasing pain in her tooth. Clinical examination of the right first maxillary molar (#3) revealed moderate sensitivity to percussion and mild sensitivity to palpation. A pulpal diagnosis of symptomatic irreversible pulpitis and a periapi-cal diagnosis of symptomatic apical periodontitis were made. Mechanical instrumentation was performed using rotary file size #25/.04 for the mesiobuccal and distobuccal canals and size #25/.06 for the palatal canal to create a fluid path and enable obturation of the root canal system following the GentleWave® Procedure. The GentleWave Procedure was completed using Multisonic Ultracleaning™ for complete debridement and disinfection of the root canal system. The tooth was obturated using a warm vertical continuous wave obturation technique. Postoperative radiographs revealed complex anatomy within the apical third that was undetected both during pre-operative radiography and mechanical instrumentation. The palatal canal exhibited a complex apical delta with multiple points of exit, and the mesiobuccal canal revealed an undetected lateral canal within the apical third that had a separate and distinct egress. Conclusion and clinical significance: It is important for the clinician to debride and disinfect complex anatomy within the root canal system to reduce the risk of endodontic failure. This case report highlights the clinical significance of utilizing the GentleWave Procedure for detecting complex apical anatomy during endodontic therapy.

Dens invaginatus with necrotic pulp in a right maxillary lateral incisor with preserved vitality.

PubMed

Alessandro, Lanza; Fabrizio, Di Francesco; Gennaro, De Marco; Dario, Di Stasio; Eugenio, Guidetti; Letizia, Perillo; Luigi, Femiano; Felice, Femiano

2018-01-01

Dens invaginatus (DI) is a dental malformation occurring in several morphologic types. Consequently, treatment of teeth affected by DI can get complicated because of the complex root canal anatomy. The aim is to describe how to manage a rare report of a DI with necrotic pulp held within the vital pulp of a maxillary lateral incisor. Oral fistula was found on the buccal mucosa of the apex of the vital maxillary lateral incisor with a DI having necrotic pulp. Endodontic treatment of the maxillary lateral incisor and of the tract canal of DI was realized. Clinical disappearance of oral sinus tract was observed after 10 days. On the contrary, the disappearance of radiolucent area occurred after 6 months. A proper and prompt diagnosis is necessary to carry out effective prevention protocols or prevent consequences generating nonrecoverable endo-perio diseases.

Measurement of Distraction Force in Cleft Lip and Palate Patients During Le Fort I Maxillary Advancement With Rigid External Distraction.

PubMed

Sawada, Hiromi; Ogawa, Takuya; Kataoka, Keiichi; Baba, Yoshiyuki; Moriyama, Keiji

2017-03-01

Maxillary distraction osteogenesis (DO) is a mainstream surgical technique for patients who have severe maxillary hypoplasia associated with craniofacial syndromes and cleft-related deformities. However, limited information about the biomechanical aspects of maxillary DO is available limiting broad utilization and improvements to the procedure. The objective of this study was to analyze force levels during the active distraction process and to investigate the relationship between distraction force and maxillary movement during Le Fort I maxillary DO using a rigid external distraction (RED) system. Microtension gauges were integrated into the distraction wires on each side of the RED system. Six patients with cleft lip and palate aged 12.8 to 23.5 years underwent strain gauge measurements during maxillary advancement with DO using an RED system. Lateral cephalograms were taken to measure maxillary horizontal, vertical, and linear movements after DO. The average linear maxillary movement was 11.2 mm (range 8.5-15.9 mm). The applied forces ranged from 13.4 to 26.8 N. The distance of maxillary movement was proportional to the distraction force. The measurement of distraction forces during DO provides important information with which to establish appropriate protocols. Patients requiring more advancement may require more distraction force. However, other factors such as scarring, patient anatomy, surgical freedom of the osteotomized maxilla, and the like, may affect the required force during DO with the RED system.

Endodontic management of maxillary third molar with MB2 (Vertucci type IV) canal configuration diagnosed with Cone Beam Computed Tomography - a case report.

PubMed

Jain, Pradeep; Patni, Pallav; Yogesh, Pant; Anup, Vyas

2017-01-01

The endodontic treatment of maxillary third molar often poses a challenge even to an experienced endodontist because of their most posterior location in the dental arch, aberrant occlusal anatomy, abnormal root canal configuration and eruption patterns. Owing to these anatomical limitations, their extraction remains the treatment of choice for many clinicians. As we know, retaining every functional component of the dental arch is of prime importance in contemporary dental practice. This clinical case report aims to discuss the endodontic treatment of maxillary third molar with MB2 root canal separated throughout the length and exit at two separate apical foramina (Vertucci type IV) diagnosed with Cone Beam Computed Tomography (CBCT)..

The Anatomical Nature of Dental Paresthesia: A Quick Review

PubMed Central

Ahmad, Maha

2018-01-01

Dental paresthesia is loss of sensation caused by maxillary or mandibular anesthetic administration before dental treatment. This review examines inferior alveolar block paresthesia symptoms, side effect and complications. Understanding the anatomy of the pterygomandibular fossa will help in understanding the nature and causes of the dental paresthesia. In this review, we review the anatomy of the region surrounding inferior alveolar injections, anesthetic agents and also will look also into the histology and injury process of the inferior alveolar nerve. PMID:29541262

Endodontic Management of Maxillary First Molar With Two Palatal Canals Aided With Cone Beam Computed Tomography: A Case Report.

PubMed

Pamboo, Jaya; Hans, Manoj Kumar; Chander, Subhas; Sharma, Kapil

2017-04-01

The success of endodontic therapy is based on having sufficient endodontic access, correct cleaning and shaping, and adequate root canal obturation. However, endodontic treatment is also dependent on having a sound knowledge of the internal anatomy of human teeth, especially when anatomic variations are present. Reporting these alterations is important for improving the understanding and expertise of endodontists. The aim of this case report is to describe a unique case of maxillary first molar with 2 palatal canals within a single root, as confirmed by cone-beam computed tomography (CBCT) scans. This article also reviews recent case reports of extra palatal root canals in the maxillary first molars and the role of CBCT analysis in successfully diagnosing them.

Esthetic restorations of maxillary anterior teeth with orthodontic treatment and porcelain laminate veneers: a case report.

PubMed

Moon, Ji-Eun; Kim, Sung-Hun; Han, Jung-Suk; Yang, Jae-Ho; Lee, Jai-Bong

2010-06-01

If orthodontists and restorative dentists establish the interdisciplinary approach to esthetic dentistry, the esthetic and functional outcome of their combined efforts will be greatly enhanced. This article describes satisfying esthetic results obtained by the distribution of space for restoration by orthodontic treatment and porcelain laminate veneers in uneven space between maxillary anterior teeth. It is proposed that the use of orthodontic treatment for re-distribution of the space and the use of porcelain laminate veneers to alter crown anatomy provide maximum esthetic and functional correction for patients with irregular interdental spacing.

Florid cemento osseous dysplasia in association with dentigerous cyst.

PubMed

Sanjai, Karpagaselvi; Kumarswamy, Jayalakshmi; Kumar, Vinod K; Patil, Archana

2010-07-01

We present a case of florid cemento-osseous dysplasia occurring in a 20-year-old Indian woman. The subject presented with three lesions involving the maxillary right quadrant, maxillary left quadrant and mandibular left quadrant. The mandibular left quadrant also demonstrated a cyst.The diagnosis was made by correlating the clinical presentation with that of the radiological and histopathological findings. This is a rare entity because of an unusual combination of Asian race along with the association of dentigerous cyst.

Anatomic symmetry of root and root canal morphology of posterior teeth in Indian subpopulation using cone beam computed tomography: A retrospective study

PubMed Central

Felsypremila, Gnanasekaran; Vinothkumar, Thilla Sekar; Kandaswamy, Deivanayagam

2015-01-01

Objective: To investigate the anatomic symmetry of maxillary and mandibular posteriors in Indian subpopulation using cone beam computed tomography (CBCT). Materials and Methods: CBCT images of 246 patients that had at least one noncarious, posterior tooth free of restorations in each quadrant were enrolled for retrospective analysis. A total of 3015 teeth (811 maxillary premolars, 845 mandibular premolars, 738 maxillary molars, and 621 mandibular molars) were analyzed for number of roots and root canals, canal morphology and anatomic symmetry, and concurrent types between the maxilla and mandible. Results: There was no difference in the percentage of symmetry for maxillary first (81.5%) and second (81.5%) premolars. Mandibular second premolars (98.3%) exhibited greater symmetry than mandibular first premolars (96.1%). First molars (77.5% and 82.1%) showed greater symmetry than second molars (70.8% and 78.6%), in both maxillary and mandibular arches, respectively. The most common anatomy observed were: maxillary first premolars – 2 roots with 2 canals, maxillary second premolars – 1 root with 2 canals, mandibular first and second premolars – 1 root with 1 canal, maxillary first and second molars – 3 roots with 4 canals, and mandibular first and second molars – 2 roots with 3 canals. When compared with any other teeth, maximum asymmetry was observed in maxillary second molar (29.2%). Conclusion: The percentage of symmetry observed in the present study varied from 70% to 98% with least percentage of symmetry in maxillary second molars. These data should alert the clinicians while treating homonymous teeth of the same patient. PMID:26929687

Anatomy Adventure: A Board Game for Enhancing Understanding of Anatomy

ERIC Educational Resources Information Center

Anyanwu, Emeka G.

2014-01-01

Certain negative factors such as fear, loss of concentration and interest in the course, lack of confidence, and undue stress have been associated with the study of anatomy. These are factors most often provoked by the unusually large curriculum, nature of the course, and the psychosocial impact of dissection. As a palliative measure, Anatomy…

An unusual exostotic lesion of the maxillary sinus from Roman Lincoln.

PubMed

Kendall, Ross; Kendall, Ellen J; Macleod, Iain; Gowland, Rebecca; Beaumont, Julia

2015-12-01

This report provides a differential diagnosis of an exostotic bony lesion within the left maxillary sinus of a Romano-British (3rd to 4th century AD) adult male from Newport, Lincoln. Macroscopic, radiographic, and cone beam computed tomography (CBCT) analyses suggest that the lesion is likely of odontogenic origin. The overall size of the lesion and areas of sclerosis and radiolucency, together with its hypothesised odontogenic origin, suggest that the lesion represents a chronic exostotic osteomyelitic reaction to the presence of odontogenic bacteria. While modern case studies of odontogenic maxillary sinus osteomyelitis are noteworthy, published cases of this condition are extremely rare in an archaeological context and may be underreported due to the enclosed nature of the sinuses. Such infections may have serious implications for individual and population health, and non-destructive investigation should be considered in cases where significant maxillary caries are present. Copyright © 2015 Elsevier Inc. All rights reserved.

Aberration in the palatal root of the maxillary first molar

PubMed Central

Rajalbandi, Sandeep; Shingte, Sandhya Narayan; Sundaresh, K J; Mallikarjuna, Rachappa

2013-01-01

Thorough knowledge of root canal morphology is essential for the endodontic therapy. Variations in the root and root canal morphology, especially in multirooted teeth, are a constant challenge for diagnosis and management. The dentist needs to be familiar with the various root canal configurations and their variations for successful endodontic therapy. There are rare variations in canal number and configuration in maxillary molars, which could affect treatment outcome. Two lingual root structures are occasionally found on human permanent maxillary molars. One of these is the normal lingual root, which is always present, the other is a supernumerary structure which can be located either mesiolingually (radix mesiolingualis) or distolingually (radix distolingualis). The purpose of this paper is to review the literature and to demonstrate a case report which describes the successful non-surgical endodontic management of an unusual maxillary first molar with four separate roots and four canals. PMID:23632609

Endodontic Management of a Maxillary Lateral Incisor with 4 Root Canals and a Dens Invaginatus Tract.

PubMed

Nosrat, Ali; Schneider, S Craig

2015-07-01

Dens invaginatus (DI) is associated with complex internal anatomy. This article represents a maxillary lateral incisor with 5 root canals including DI. The treatment was planned and performed using cone-beam computed tomographic (CBCT) imaging. After clinical and radiographic evaluations, tooth #7 was diagnosed with DI and pulp necrosis with symptomatic apical periodontitis. Periapical radiographs of the tooth showed 2 roots and complex internal anatomy. CBCT evaluation revealed tooth #7 had 5 separate canals (4 root canals and 1 DI canal extending through the root to the periodontal ligament), communication between DI and the root canal system, and severe and multiple curvatures of the palatal canals. Root canal treatment was completed in 2 visits. Modified access openings were required to safely treat the dilacerated palatal canals. At the 6-month re-evaluation, the patient reported he had remained asymptomatic and his tooth had remained functional since the treatment was completed. Clinical examination showed tooth #7 had no sensitivity to percussion or palpation, probe depths within normal limits (≤3 mm), and no mobility. Radiographic assessment of the tooth showed significant osseous healing of the preoperative lesion. Three-dimensional imaging is a valuable tool for endodontic management of teeth with complex internal anatomy. Three-dimensional imaging is recommended for evaluating and treatment planning cases with DI. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Computed tomographic anatomy of the nasal cavity, paranasal sinuses and tympanic cavity of the koala.

PubMed

Hemsley, S; Palmer, H; Canfield, R B; Stewart, M E B; Krockenberger, M B; Malik, R

2013-09-01

To use cross-sectional imaging (helical computed tomography (CT)) combined with conventional anatomical dissection to define the normal anatomy of the nasal cavity and bony cavitations of the koala skull. Helical CT scans of the heads of nine adult animals were obtained using a multislice scanner acquiring thin slices reconstructed in the transverse, sagittal and dorsal planes. Subsequent anatomical dissection permitted confirmation of correct identification and further delineation of bony and air-filled structures visible in axial and multiplanar reformatted CT images. The nasal cavity was relatively simple, with little scrolling of nasal conchae, but bony cavitations were complex and extensive. A rostral maxillary recess and ventral conchal, caudal maxillary, frontal and sphenoidal paranasal sinuses were identified and characterised. Extensive temporal bone cavitation was shown to be related to a large epitympanic recess. The detailed anatomical data provided are applicable to future functional and comparative anatomical studies, as well as providing a preliminary atlas for clinical investigation of conditions such as cryptococcal rhinosinusitis, a condition more common in the koala than in many other species. © 2013 Australian Veterinary Association.

C-shaped maxillary permanent first molar: a case report and literature review.

PubMed

Martins, Jorge N R; Quaresma, Sérgio; Quaresma, Maria Carlos; Frisbie-Teel, Jared

2013-12-01

The C-shaped configuration is rare in the upper first molar.The purpose of this article is to present 2 cases diagnosed during endodontic therapy and perform a literature review of this anatomy in the upper first molar. Endodontic therapy was performed by using a dental operating microscope and a cone-beam computed tomography analysis for better understanding of this anatomy. A literature search was conducted to identify and compare all the published cases of C-shaped upper first molar. Before the cases reported in this article, only 5 cases were available in the published literature. Three different types of C-shaped configurations in the upper first molar have been presented. The C-shaped maxillary first molar is a rare anatomic configuration. The use of the dental operating microscope may help in the endodontic therapy of these cases. Three types of C-shaped configurations have been reported; the fusion of the distobuccal root with the palatal root appears to be the most usual one. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Endoscopic endonasal anatomy of superior orbital fissure and orbital apex regions: critical considerations for clinical applications.

PubMed

Dallan, Iacopo; Castelnuovo, Paolo; de Notaris, Matteo; Sellari-Franceschini, Stefano; Lenzi, Riccardo; Turri-Zanoni, Mario; Battaglia, Paolo; Prats-Galino, Alberto

2013-05-01

The superior orbital fissure is a critical three-dimensional space connecting the middle cranial fossa and the orbit. From an endoscopic viewpoint, only the medial aspect has a clinical significance. It presents a critical relationship with the lateral sellar compartment, the pterygopalatine fossa and the middle cranial fossa. The connective tissue layers and neural and vascular structures of this region are described. The role of Muller's muscle is confirmed, and the utility of the maxillary and optic strut is outlined. Muller's muscle extends for the whole length of the inferior orbital fissure, passes over the maxillary strut and enters the superior orbital fissure, representing a critical surgical landmark. Dividing the tendon between the medial and inferior rectus muscle allows the identification of the main trunk of the oculomotor nerve, and a little laterally, it is usually possible to visualize the first part of the ophthalmic artery. Based on a better knowledge of anatomy, we trust that this area could be readily addressed in clinical situations requiring an extended approach in proximity of the orbital apex.

Daughter and her mildly affected father with Keipert syndrome.

PubMed

Dumic, Miroslav; Kokic, Durda Dovzak; Matic, Toni; Potocki, Kristina

2006-11-15

A 10-year-old girl with characteristic features of Keipert syndrome (broad terminal phalanges, especially of the thumb and hallux, sensorineural deafness, unusual facial features, large head circumference, maxillary hypoplasia, hoarse voice) and her mildly affected father (broad terminal phalanges, especially of the thumb and hallux, large head circumference, maxillary hypoplasia, and hoarse voice) are presented. The girl is the first reported female with this rare syndrome to date, and the fact that she probably inherited the disease from her father suggests an autosomal dominant pattern of inheritance. (c) 2006 Wiley-Liss, Inc.

Cervical enamel projections in unusual locations: a case report and mini-review.

PubMed

Chan, Hsun-Liang; Oh, Tae-Ju; Bashutski, Jill; Fu, Jia-Hui; Wang, Hom-Lay

2010-05-01

Periodontitis is primarily a bacteria-induced disease that can be modified by tooth-related local factors. Cervical enamel projections (CEPs) are a common tooth anomaly that can act as contributing factors in the development of periodontitis. They are most commonly found at the buccal surfaces of mandibular molars. A 57-year-old female was referred to our clinic for treatment of chronic periodontitis. A clinical examination revealed moderate attachment loss that was localized to the palatal side of the maxillary second molars. The rest of the dentition was less affected, with a diagnosis of generalized slight chronic periodontitis. An initial non-surgical periodontal treatment was provided followed by apically positioned flap surgery in the maxillary right and left posterior areas. At the time of surgery, CEPs were found where the periodontium was most affected. Because surgical intervention exposed the CEPs, they were not removed. After the active therapy, which resulted in inflammation resolution and maintainable probing depths, the patient was placed on a 3-month recall for periodontal maintenance. CEPs were found in an unusual location on the palatal roots of maxillary second molars. The findings of this case report confirm the role of CEPs as a local contributing factor in localized chronic periodontitis.

Cervical enamel projections in unusual locations: A case report and mini-review.

PubMed

Chan, Hsun-Liang; Oh, Tae-Ju; Bashutski, Jill; Fu, Jia-Hui; Wang, Hom-Lay

2010-02-02

Background: Periodontitis is primarily a bacteria-induced disease that can be modified by tooth-related local factors. Cervical enamel projections (CEPs) are a common tooth anomaly that can act as a contributing factor in the development of periodontitis. They are most commonly found at the buccal surfaces of mandibular molars. Methods: A 57-year-old female was referred to our clinic for treatment of chronic periodontitis. Clinical examination revealed moderate attachment loss that was localized to the palatal side of the maxillary secondary molars. The rest of the dentition was less affected, with a diagnosis of generalized slight chronic periodontitis. Initial non-surgical periodontal treatment was provided, followed by apically positioned flap surgery in the maxillary right and left posterior areas. At the time of surgery, CEPs were found where the periodontium was most affected. Results: Due to the fact that surgical intervention exposed the CEPs, they were not removed. After the active therapy, which resulted in inflammation resolution and maintainable probing depth, the patient was placed on a three-month recall for periodontal maintenance. Conclusions: This case report presents CEPs in an unusual location in the palatal roots of maxillary secondary molars. CEPs confirm their role as a local contributing factor in localized chronic periodontitis.

Three-dimensional CAD/CAM imaging of the maxillary sinus in ageing process.

PubMed

Lovasova, Kvetuse; Kachlik, David; Rozpravkova, Mirela; Matusevska, Maria; Ferkova, Jana; Kluchova, Darina

2018-04-05

During the physiological ageing process atrophy of the alveolar bone appears in vertical direction. This bone resorption causes pushing the limits of the maxillary sinus at the expense of a degraded bone. The sinus volume increases due to the facial development in children and adolescents or during the ageing process due to the loss of teeth and bone mass. The main aim of this study is to determine the sinus shape and sinus floor morphology related to age. Human adult male and female cadaveric heads (aged 37 to 83 years) with different dental status were used. The three-dimensional CAD/CAM software was used to scan the solid impressions of the maxillary sinus to visualize the real sinus shape and sinus floor. Subsequently, other findings are shown in tables and evaluated graphically. The maxillary sinus morphology, its relationship to the nasal cavity, the sub sinus alveolar bone height, displacement of the lowest and highest points of sinus, and the sinus relationship to the roots of the upper teeth were studied and evaluated. Some septa, crests, and the prominent infraorbital canal were also found in the area of the sinus floor. This paper provides a unique view on the maxillary sinus and its changes during the ageing process with preserved topographical relations in a representative sample of the Slovak population. The visualization of the maxillary sinus anatomy is necessary in the diagnosis and treatment plans for dental implants and during current surgical procedures. Copyright © 2018 Elsevier GmbH. All rights reserved.

Maxillary sinus marrow hyperplasia in sickle cell anemia.

PubMed

Fernandez, M; Slovis, T L; Whitten-Shurney, W

1995-11-01

Marrow hyperplasia is a sequela of sickle cell anemia (SCA) and may be seen in the skull in children after 5 years of age [1]. The facial bones, except for the mandible and orbits, are usually not involved [1-3]. We report an unusual case of a 28-month-old black boy with SCA who presented with extensive marrow hyperplasia of the maxillary sinuses in addition to severe calvarial and mandibular changes. The imaging characteristics on CT (similar to other sites of marrow hyperplasia) and MR (low signal on both T1 and T2 sequences) should aid in making the correct diagnosis.

Facial blanching after inferior alveolar nerve block anesthesia: an unusual complication.

PubMed

Kang, Sang-Hoon; Won, Yu-Jin

2017-12-01

The present case report describes a complication involving facial blanching symptoms occurring during inferior alveolar nerve block anesthesia (IANBA). Facial blanching after IANBA can be caused by the injection of an anesthetic into the maxillary artery area, affecting the infraorbital artery.

Root canal morphology of Chalcolithic and early bronze age human populations of El Mirador Cave (Sierra de Atapuerca, Spain).

PubMed

Ceperuelo, Dolors; Lozano, Marina; Duran-Sindreu, Fernando; Mercadé, Montse

2014-12-01

This study provides a morphological characterization of the inner anatomy of the root canals of permanent first and second molars in Chalcolithic and early Bronze Age human fossils using cone-beam computed tomography. The general evolutionary trend in present-day human dentition is related to morphological simplification. As little is known about when this trend appeared in Homo sapiens populations, the aim of this work is to test the presence of modern radicular morphology 4,400 years ago. Fifty-four permanent first and second maxillary and mandibular molars of 17 individuals were included in the study. All maxillary first and second molars showed three separate roots. Almost all the lower molars analyzed (100% of first molars and 75% of second molars) had two separate roots. More differences in the canal system configuration were documented in the maxillary mesiobuccal roots than in the palatal or distobuccal roots. The most variable tooth in root and canal configuration is the maxillary second molar. It should be pointed out that 12.5% of the teeth analyzed showed a C-shaped root configuration. © 2014 Wiley Periodicals, Inc.

Pilot study on laser propagation in maxillary and mandibular bone: Grey level image analysis for optical measurements.

PubMed

Guiselini, Monalisa Jacob; Deana, Alessandro Melo; de Fátima Teixeira da Silva, Daniela; Koshoji, Nelson Hideyoshi; Mesquita-Ferrari, Raquel Agnelli; do Vale, Katia Llanos; Mascaro, Marcelo Betti; de Moraes, Simone Aleksandra; Bussadori, Sandra Kalil; Fernandes, Kristianne Porta Santos

2017-06-01

Bone tissue anatomy, density and porosity vary among subjects in different phases of life and even within areas of a single specimen. The optical characteristics of changes in bone tissue are analyzed based on these properties. Photobiomodulation has been used to improve bone healing after surgery or fractures. Thus, knowledge on light propagation is of considerable importance to the obtainment of successful clinical outcomes. This study determines light penetration and distribution in human maxillary and mandibular bones in three different regions (anterior, middle, and posterior). A HeNe laser (633nm) irradiated maxillary and mandibular bones in the cervical-apical direction. The light propagation and scattering pattern were acquired and the grey level of the images was analyzed. Three-dimensional plots of the intensity profile and attenuation profiles were created. Differences in optical properties were found between the mandibular and maxillary bones. The maxilla attenuated more light than the mandible at all sites, leading to a shallower penetration depth. Our results provide initial information on the behavior of the propagation of red laser on alveolar bone using an optical method. Copyright © 2017 Elsevier B.V. All rights reserved.

[Autotransplantation of a maxillary incisor and orthodontic care: a case study].

PubMed

Charpentier, Valentine; Makaremi, Masrour; Brondeau, François de

2017-12-01

Severely impacted teeth with atypical root anatomy do not respond well to orthodontic traction after surgical exposure. Consequently, they are often removed, but replacing them with dental prostheses can prove difficult in patients who are still growing. Thus, autotransplantation seems to be the only way to preserve a natural tooth and the alveolar bone. An upper central incisor impacted in the region of the nasal cavities with an open apex was diagnosed in an 8.5-year-old female patient. The tooth displayed a curved root pressed against the maxillary cortical bone preventing orthodontic traction treatment. Through this clinical case involving autotransplantation of a maxillary incisor report and a review of the literature, this article explores the indications and exposes the different stages of this orthodontic-surgical protocol. In this case, autotransplantation enabled restoration of maxillary arch continuity. After two years of orthodontic treatment, the bone reconstruction of the extraction site was very satisfactory. The benefits of this technique and the precautions to be taken are discussed as well as the various protocols. The increasing success rate of this surgical procedure makes it possible to consider it as a protocol for the future. © EDP Sciences, SFODF, 2017.

3D CBCT anatomy of the pterygopalatine fossa.

PubMed

Rusu, Mugurel Constantin; Didilescu, Andreea Cristiana; Jianu, Adelina Maria; Păduraru, Dumitru

2013-03-01

The anatomy of the pterygopalatine fossa keeps a traditional level and is viewed as constant, even though a series of structures neighboring the fossa are known to present individual variations. We aimed to evaluate on 3D volume renderizations the anatomical variables of the pterygopalatine fossa, as related to the variable pneumatization patterns of the bones surrounding the fossa. The study was performed retrospectively on cone beam computed tomography (CBCT) scans of 100 patients. The pterygopalatine fossa was divided into an upper (orbital) and a lower (pterygomaxillary) floor; the medial compartment of the orbital floor lodges the pterygopalatine ganglion. The pneumatization patterns of the pterygopalatine fossa orbital floor walls were variable: (a) the posterior wall pneumatization pattern was determined in 89.5 % by recesses of the sphenoidal sinus related to the maxillary nerve and pterygoid canals; (b) the upper continuation of the pterygopalatine fossa with the orbital apex was narrowed in 79.5 % by ethmoid air cells and/or a maxillary recess of the sphenoidal sinus; (c) according to its pneumatization pattern, the anterior wall of the pterygopalatine fossa was a maxillary (40.5 %), maxillo-ethmoidal (46.5 %), or maxillo-sphenoidal (13 %) wall. The logistic regression models showed that the maxillo-ethmoidal type of pterygopalatine fossa anterior wall was significantly associated with a sphenoidal sinus only expanded above the pterygoid canal and a spheno-ethmoidal upper wall. The pterygopalatine fossa viewed as an intersinus space is related to variable pneumatization patterns which can be accurately identified by CBCT and 3DVR studies, for anatomic and preoperatory purposes.

Facial blanching after inferior alveolar nerve block anesthesia: an unusual complication

PubMed Central

2017-01-01

The present case report describes a complication involving facial blanching symptoms occurring during inferior alveolar nerve block anesthesia (IANBA). Facial blanching after IANBA can be caused by the injection of an anesthetic into the maxillary artery area, affecting the infraorbital artery. PMID:29349355

Dominantly inherited syndrome of microcephaly and cleft palate.

PubMed

Halal, F

1983-05-01

Two sisters and their mother had a syndrome of microcephaly, cleft palate, and variable anomalies such as unusual facial appearance, hypotelorism, abnormal retinal pigmentation, maxillary hypoplasia, goiter, camptodactyly, mild mental retardation, and abnormal dermatoglyphics. This is an evidently dominantly inherited trait, either autosomal or X-linked.

Geometric analysis of maxillary first premolar prepared by two nickel-titanium rotary instruments.

PubMed

Al-Sudani, Dina; Almalki, Majed; Al-Shahrani, Saad; Ahlquist, Michael

2014-03-01

The present study was conducted with the aim of evaluating and comparing the shaping ability of two Nickel-titanium rotary instruments, with two disparate design features, on root canal geometry of extracted human maxillary first premolars using microcomputed tomography. Twenty four bifurcated maxillary first premolars were divided into two groups and embedded in a rubber-based impression material. Both groups were submitted to micro-computed tomography before and after canal preparation (buccal and palatal) with either ProFile Vortex or Revo-S rotary instruments. Images were reconstructed and cross-sections corresponding to a distance 1, 2, 3, 4, 5, 6, and 7 mm from the anatomical apex were selected for canal transportation analysis. Volume changes were also measured. The degree and direction of canal transportation were non-significant for both instruments. Statistically significant differences were observed only between levels in the buccal canal in both groups. There was no significant difference between the two rotary systems in regards to the volume of dentin removed. Our findings showed that ProFile Vortex and Revo-S instruments respected the original root canal anatomy and behaved similarly. ProFile Vortex rotary systems produced with innovative process were concluded to shape the upper maxillary premolar by leading minimal canal transportation, similar to Revo-S, rotary systems produced from traditional process.

Second Mesiobuccal Root Canal of Maxillary First Molars in a Brazilian Population in High-Resolution Cone-Beam Computed Tomography

PubMed Central

Gomes Alves, Claudia Rezende; Martins Marques, Márcia; Stella Moreira, Maria; Harumi Miyagi de Cara, Sueli Patricia; Silveira Bueno, Carlos Eduardo; Lascala, Cesar Ângelo

2018-01-01

Introduction: The second canal of the mesiobuccal root (MB2) of the maxillary first molars (MFM) is difficult to detect in conventional radiographs and can be a major cause of failure in endodontic treatments. The aim of this study was to investigate the prevalence and anatomy of the MB2 by using high-resolution cone-beam computed tomography (CBCT). Methods and Materials: Three radiologists examined 414 high-resolution CBCTs. Of these, the CBCTs of 287 patients (mean age 49.43±16.76) who had at least one MFM were selected, making a total of 362 teeth. Prevalence and its relation with gender and age of the patients, side of the tooth, and Vertucci’s classification were analyzed. Data were statistically analyzed (P<0.05). Results: A total of 68.23% of the teeth exhibited the MB2. The presence of the MB2 was equivalent in both genders and significantly higher in younger patients. There was no correlation between the presence of the MB2 in relation to both the sides of the MFM and the FOV size. Smaller FOV recognized higher Vertucci’s grades. Conclusions: It was concluded that the prevalence of the MB2 canal in maxillary first molars in this Brazilian population examined with high-resolution CBTCs is 68.23%, being more prevalent in young patients. Gender and the side examined are no factors for determining the presence of MB2. Although the both FOVs of the high-resolution CBTCs (FOV 8 and 5) detect the MB2 canal, smaller FOV (FOV 5) is more accurate in the analysis of the internal anatomy of such root canals, according to the Vertucci´s classification. PMID:29692839

Micro-Computed Tomography Analysis of the Root Canal Morphology of Palatal Roots of Maxillary First Molars.

PubMed

Marceliano-Alves, Marília; Alves, Flávio Rodrigues Ferreira; Mendes, Daniel de Melo; Provenzano, José Claudio

2016-02-01

A thorough knowledge of root canal anatomy is critical for successful root canal treatments. This study evaluated the internal anatomy of the palatal roots of maxillary first molars with micro-computed tomography (microCT). The palatal roots of extracted maxillary first molars (n = 169) were scanned with microCT to determine several anatomic parameters, including main canal classification, lateral canal occurrence and location, degree of curvature, main foramen position, apical constriction presence, diameters 1 and 2 mm from the apex and 1 mm from the foramen, minor dentin thickness in those regions, canal volume, surface area, and convexity. All canals were classified as Vertucci type I. The cross sections were oval in 61% of the canals. Lateral canals were found in 25% of the samples. The main foramen did not coincide with the root apex in 95% of the cases. Only 8% of the canals were classified as straight. Apical constriction was identified in 38% of the roots. The minor and major canal diameters and minor dentin thickness were decreased near the apex. The minor dentin thickness 1 mm from the foramen was 0.82 mm. The palatal canals exhibited a volume of 6.91 mm(3) and surface area of 55.31 mm(2) and were rod-shaped. The root canals of the palatal roots were classified as type I. However, some factors need to be considered during the treatment of these roots, including the frequent ocurrence of moderate/severe curvatures, oval-shaped cross-sections, and lateral canals, noncoincidence of the apical foramen with the root apex, and absence of apical constriction in most cases. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Second Mesiobuccal Root Canal of Maxillary First Molars in a Brazilian Population in High-Resolution Cone-Beam Computed Tomography.

PubMed

Gomes Alves, Claudia Rezende; Martins Marques, Márcia; Stella Moreira, Maria; Harumi Miyagi de Cara, Sueli Patricia; Silveira Bueno, Carlos Eduardo; Lascala, Cesar Ângelo

2018-01-01

The second canal of the mesiobuccal root (MB2) of the maxillary first molars (MFM) is difficult to detect in conventional radiographs and can be a major cause of failure in endodontic treatments. The aim of this study was to investigate the prevalence and anatomy of the MB2 by using high-resolution cone-beam computed tomography (CBCT). Three radiologists examined 414 high-resolution CBCTs. Of these, the CBCTs of 287 patients (mean age 49.43±16.76) who had at least one MFM were selected, making a total of 362 teeth. Prevalence and its relation with gender and age of the patients, side of the tooth, and Vertucci's classification were analyzed. Data were statistically analyzed ( P <0.05). A total of 68.23% of the teeth exhibited the MB2. The presence of the MB2 was equivalent in both genders and significantly higher in younger patients. There was no correlation between the presence of the MB2 in relation to both the sides of the MFM and the FOV size. Smaller FOV recognized higher Vertucci's grades. It was concluded that the prevalence of the MB2 canal in maxillary first molars in this Brazilian population examined with high-resolution CBTCs is 68.23%, being more prevalent in young patients. Gender and the side examined are no factors for determining the presence of MB2. Although the both FOVs of the high-resolution CBTCs (FOV 8 and 5) detect the MB2 canal, smaller FOV (FOV 5) is more accurate in the analysis of the internal anatomy of such root canals, according to the Vertucci´s classification.

Anatomy and osteohistology of the basal hadrosaurid dinosaur Eotrachodon from the uppermost Santonian (Cretaceous) of southern Appalachia.

PubMed

Prieto-Márquez, Albert; Erickson, Gregory M; Ebersole, Jun A

2016-01-01

The cranial and postcranial anatomy of the basal hadrosaurid dinosaur Eotrachodon orientalis, from the uppermost Santonian of southern Appalachia (southeastern U.S.A.), is described in detail. This animal is the only known pre-Campanian non-lambeosaurine hadrosaurid, and the most complete hadrosauroid known from Appalachia. E. orientalis possesses a mosaic of plesiomorphic and derived characters in the context of Hadrosauroidea. Characters shared with basal hadrosauroids include a short and sloping maxillary ectopterygoid shelf, caudally prominent maxillary jugal process, one functional tooth per alveolus on the maxillary occlusal plane, a jugal rostral process with a shallow caudodorsal margin and medioventrally facing articular facet, a vertical dentary coronoid process with a poorly expanded apex, and tooth crowns with accessory ridges. Derived characters shared with other hadrosaurids include a circumnarial depression compartmented into three fossae (as in brachylophosaurins and Edmontosaurus), a thin everted premaxillary oral margin (as in Gryposaurus, Prosaurolophus, and Saurolophus), and a maxilla with a deep and rostrocaudally extensive rostrodorsal region with a steeply sloping premaxillary margin (as in Gryposaurus). Eotrachodon orientalis differs primarily from the other hadrosauroid from the Mooreville Chalk of Alabama, Lophorhothon atopus, in having a slender and crestless nasal whose caudodorsal margin is not invaded by the circumnarial depression. Hadrosaurus foulkii, the only other known hadrosaurid from Appalachia, is distinct from E. orientalis in having dentary teeth lacking accessory ridges and a dorsally curved shaft of the ischium. A histological section of the tibia of the E. orientalis holotype (MSC 7949) suggests that this individual was actively growing at the time of death and, thus, had the potential to become a larger animal later in development.

Internal anatomy of the hornbill casque described by radiography, contrast radiography, and computed tomography.

PubMed

Gamble, Kathryn C

2007-03-01

Hornbills are distinguished from most other avian taxa by the presence of a casque on the dorsal maxillary beak, which, in all but 1 of the 54 extant hornbill species, is described as essentially an air-filled cavity enclosed by minimal cancellous bone. The external casque has been described in detail, but little has been described about its internal anatomy and the communications between the casque and the paranasal sinuses. In this study, 10 intact casque and skull specimens of 7 hornbill species were collected opportunistically at necropsy. The anatomy of the casque and the skull for each of the specimens was examined by radiography, contrast radiography, and computed tomography. After imaging, 8 specimens were submitted for osteologic preparation to directly visualize the casque and the skull interior. Through this standardized review, the baseline anatomy of the internal casque was described, including identification of a novel casque sinus within the paranasal sinus system. These observations will assist clinicians in the diagnosis and treatment of diseases of the casque in hornbill species.

A Rare Occurrence of Geminated-Taloned Maxillary Lateral Incisor

PubMed Central

Kayal, Vizhi G

2012-01-01

ABSTRACT The talon cusp is a developmental anomaly characterized by the presence of an accessory cusp like structure projecting from the cingulum area of the anterior teeth. Gemination is an anomaly caused by a single tooth germ that attempted to divide during its development. These developmental anomalies may cause clinical problems including esthetic impairment, pain, caries and tooth crowding. Co-occurrence of two anomalies in a teeth is rare. This paper presents an unusual case of talon cusp on geminated permanent lateral incisor. How to cite this article: Neeraja R, Kayal VG. A Rare Occurrence of Geminated-Taloned Maxillary Lateral Incisor. Int J Clin Pediatr Dent 2012;5(2):136-138. PMID:25206153

Cone-beam Computed Tomographic Study of Root Anatomy and Canal Configuration of Molars in a Spanish Population.

PubMed

Pérez-Heredia, Mercedes; Ferrer-Luque, Carmen María; Bravo, Manuel; Castelo-Baz, Pablo; Ruíz-Piñón, Manuel; Baca, Pilar

2017-09-01

The aim of this study was to identify morphologic peculiarities of roots and analyze the root canal configuration in maxillary and mandibular first and second molars by means using cone-beam computed tomographic (CBCT) imaging in a Spanish population. A total of 284 maxillary molars and 242 mandibular molars from 112 patients were examined in vivo by CBCT imaging; only untreated molars with healthy and fully matured apices were included in this study. Details regarding the number of roots, number of canals, and root canal configuration were recorded. Maxillary first and second molars had 3 roots in 97.2% and 79%, respectively. In mandibular molars, the frequency of 2 roots was 94% in first molars and 83% in second molars. The canal configuration of the palatal root was 100% Vertucci type I (1-1) in first and second molars. The distobuccal root showed a Vertucci type I configuration in 97% of first and 100% of maxillary second molars. The mesiobuccal root for first molars showed a Vertucci type II configuration (2-1) in 56.5% cases and Vertucci type IV (2-2) in 23.2%. For maxillary second molars, the Vertucci type I configuration reached 52.7%. In mandibular molars, the mesial root showed higher variability. Most frequent was the presence of 2 canals, Vertucci type II for first and second molars. In the distal root, the most common configuration was Vertucci type I in both molars. The greater percentage of fused roots was observed in maxillary molars. Vertucci type II configuration was more frequent than type IV in the mesial root of mandibular molars and the mesiobuccal root of maxillary molars. A third canal in the mesial root of first mandibular molars (6.7%) was higher than expected. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Orthodontic movement of a maxillary incisor through the midpalatal suture: a case report.

PubMed

Garib, Daniela Gamba; Janson, Guilherme; dos Santos, Patrícia Bittencourt Dutra; de Oliveira Baldo, Taiana; de Oliveira, Gabriela Ulian; Ishikiriama, Sérgio Kiyoshi

2012-03-01

Orthodontic space closure is a treatment alternative when a maxillary central incisor is missing. The objective of this report was to present an unusual treatment in which a right maxillary central incisor was moved through the midpalatal suture to replace the absent contralateral tooth. The biologic aspects and clinical appearance of the recontoured lateral and central incisors were analyzed. The position of the examined teeth and the appearance of the surrounding soft tissues were satisfactory; however, the upper midline frenulum deviated to the left. The incisor was successfully moved with no obvious detrimental effects as observed on the final radiographs. In the radiographic and tomographic examinations, the midline suture seemed to have followed the tooth movement. The patient expressed satisfaction with the results. It was concluded that orthodontic movement of the central incisor to replace a missing contralateral tooth is a valid treatment option, and the achievement of an esthetic result requires an interdisciplinary approach, including restorative dentistry and periodontics.

An in vitro study of mesiobuccal root thickness of maxillary first molars.

PubMed

Mohammadzadeh Akhlaghi, Nahid; Ravandoust, Yasaman; Najafi, Mohammad; Dadresanfar, Bahareh

2012-01-01

Understanding the internal anatomy of root canal system can significantly influence outcomes of root canal treatment. The aim of this in vitro study was to measure the thickness of mesiobuccal root at different levels in maxillary first molars. In this cross-sectional study, forty extracted human maxillary first molars were radiographed; accordingly, the mesial and distal root thicknesses of mesiobuccal (MB) roots were measured at four parallel horizontal levels. The samples were sectioned at the measured levels and then sections were scanned and saved in the computer. Buccal (B), Palatal (P), Mesial (M) and Distal (D) aspects of root thicknesses in single-canalled roots were measured. In two-canalled mesiobuccal roots, Distobuccal (DB) and Distopalatal (DP) aspects were evaluated alongside other measurements. Average radicular thickness in each aspect and each level was compared using ANOVA and t-test. A total of 25 had two canals and 15 had one canal in MB root. In single-canalled roots M and D aspects were the thinnest whereas in two-canalled samples, the thicknesses of DP and DB aspects were significantly less than others (P<0.001). The B and P had the greatest thicknesses in all the samples. The results showed that special attention should be paid to "danger zone" areas of mesiobuccal maxillary first molar roots in order to avoid technical mishaps.

Comparison of the Diagnostic Image Quality of the Canine Maxillary Dentoalveolar Structures Obtained by Cone Beam Computed Tomography and 64-Multidetector Row Computed Tomography.

PubMed

Soukup, Jason W; Drees, Randi; Koenig, Lisa J; Snyder, Christopher J; Hetzel, Scott; Miles, Chanda R; Schwarz, Tobias

2015-01-01

The objective of this blinded study was to validate the use of cone beam computed tomography (C) for imaging of the canine maxillary dentoalveolar structures by comparing its diagnostic image quality with that of 64-multidetector row CT Sagittal slices of a tooth-bearing segment of the maxilla of a commercially purchased dog skull embedded in methylmethacrylate were obtained along a line parallel with the dental arch using a commercial histology diamond saw. The slice of tooth-bearing bone that best depicted the dentoalveolar structures was chosen and photographed. The maxillary segment was imaged with cone beam CT and 64-multidetector row CT. Four blinded evaluators compared the cone beam CT and 64-multidetector row CT images and image quality was scored as it related to the anatomy of dentoalveolar structures. Trabecular bone, enamel, dentin, pulp cavity, periodontal ligament space, and lamina dura were scored In addition, a score depicting the evaluators overall impression of the image was recorded. Images acquired with cone beam CT were found to be significantly superior in image quality to images acquired with 64-multidetector row CT overall, and in all scored categories. In our study setting cone beam CT was found to be a valid and clinically superior imaging modality for the canine maxillary dentoalveolar structures when compared to 64-multidetector row CT.

An unusual presentation of ischaemic mitral regurgitation as P2 prolapse.

PubMed

Thompson, David S; Punjabi, Prakash P

2017-11-01

A 54-year-old gentleman presented with pulmonary oedema secondary to anterolateral papillary muscle (PPM) rupture and acute mitral regurgitation subsequent to myocardial ischaemia (MI). Angiography revealed complete occlusion of the first obtuse marginal (OM1) branch of the circumflex coronary artery and a 70% occlusion of the left anterior descending (LAD) coronary artery. Operatively, unusual anatomy was noted; an accessory head was attached superiorly to the anterior lateral PPM. This gave rise to chordae that were subsequently attached to the posterior second (P2) scallop. Additionally, the P2 scallop was deficient in chordae from the posteromedial PPM, thus, loss of this accessory head led to severe mitral regurgitation. We review the PPM anatomy and pathological context of PPM rupture and ischaemic mitral regurgitation.

An unusual case of schwannomatosis with bilateral maxillary sinus schwannomas and a novel SMARCB1 gene mutation.

PubMed

Toms, Jamie; Harrison, Jason; Richard, Hope; Childers, Adrienne; Reiter, Evan R; Graham, Robert S

2016-01-01

Schwannomas are benign tumors that arise from Schwann cells in the peripheral nervous system. Patients with multiple schwannomas without signs and symptoms of neurofibromatosis Type 1 or 2 have the rare disease schwannomatosis. Tumors in these patients occur along peripheral nerves throughout the body. Mutations of the SMARCB1 gene have been described as one of the predisposing genetic factors in the development of this disease. This report describes a patient who was observed for 6 years after having undergone removal of 7 schwannomas, including bilateral maxillary sinus schwannomas, a tumor that has not been previously reported. Genetic analysis revealed a novel mutation of c.93G>A in exon 1 of the SMARCB1 gene.

Mandibular second molar exhibiting a unique "Y-" and "J-" "shaped" root canal anatomy diagnosed using cone-beam computed tomographic scanning: A case report.

PubMed

Parashar, Saumya-Rajesh; Kowsky, R Dinesh; Natanasabapathy, Velmurugan

2017-01-01

This article aims to report a unique case with aberrant root canal anatomy exhibiting "Y-" and "J"-shaped canal pattern in a mandibular second molar. Anatomic complexities may pose challenges for endodontic treatment. Before performing endodontic treatment, the clinician should be aware of the internal anatomy of the tooth being treated and should recognize anatomic aberrations if present. Presence of unusual anatomy may call for modifications in treatment planning. This report describes in detail about a mandibular second molar tooth associated with two paramolar tubercles having a peculiar "Y-" and "J-"shaped canal anatomy detected with the aid of cone beam computed tomography, which has never been reported in the dental literature. The proposed treatment protocol for the endodontic management of the same has also been discussed.

Endodontic management of an unusual foreign body in a maxillary central incisor.

PubMed

Chand, Keerthi; Joesph, Sam; Varughese, Jolly Mary; Nair, Mali G; Prasanth, Santhosh

2013-09-01

The discovery of foreign bodies in the teeth is often diagnosed accidentally. It is commonly seen in children. These foreign objects may act as a potential source of infection and may later lead to a painful condition. Detailed case history, clinical and radiographic examinations are necessary to come to a conclusion about the nature, size, and location of the foreign body, and the difficulty involved in its retrieval. This paper discusses the types of foreign objects found in and around the teeth and reports an unusual case of a stapler pin in the root canal of a tooth, its retrieval, and associated management of the involved teeth.

An unusual case of severe primary molar infraocclusion.

PubMed

Gondim, Juliana Oliveira; Neto, José Jeová Siebra Moreira; de Carvalho, Fernanda Matias; da Costa, Raquel Campelo Ferreira; Monteiro, Aline Levi Baratta; Giro, Elisa Maria Aparecida

2013-01-01

Dentoalveolar ankylosis is described as the direct union between root cementum/dentin and alveolar bone. Its etiology is unknown, and conflicting opinions have been presented to explain it. Late detection of ankylosed primary teeth may cause serious problems to the occlusion and generally demands a more complex treatment approach. The purpose of this report is to present an unusual case of severe infraocclusion of the primary maxillary right second molar associated with a posterior crossbite in a 6-year-old child. The initial treatment option was tooth extraction, but the tooth resumed eruption spontaneously. After correction of the posterior crossbite and a 1-year follow-up, the tooth remained in occlusion and the permanent successor was developing without problems. From this unusual outcome, it may be concluded that further investigation of this anomaly of eruption is needed.

Granulocytic sarcoma in non-leukaemic child involving maxillary sinus with long term follow up: A rare case report.

PubMed

Sharma, Aman; Singh, Harkanwal Preet; Gupta, Anish Ashok; Garg, Parveen; Moon, Ninad Joshirao; Chavan, Rahul

2014-01-01

Granulocytic sarcoma (GS) is a rare extramedullary malignant tumor composed of immature myeloid cells. It is strongly associated with acute myeloid leukaemia, chronic myeloproliferative diseases. Occurrence of GS in the oral cavity is extremely uncommon. Present case reported an unusual occurrence of GS without leukemia involving maxillary sinus of a child. The patient underwent chemotherapy followed by radiotherapy with complete remission. A long-term follow-up of the patient was carried without any evidence of recurrence with special focus on diagnostic difficulties. The present case highlights the perplexity in diagnosing such lesions with emphasis on the need of careful interpretation of all clinical, radiographic, histopathological and immunohistochemical details as it is one of the most frequently misdiagnosed disorder.

Radix mesiolingualis and radix distolingualis: a case report of a tooth with an unusual morphology

PubMed Central

Aeran, Himanshu; Singh, Inderpreet

2016-01-01

Variation in the root and canal morphology of the maxillary first molars is quite common. The most common configuration is 3 roots and 3 or 4 canals. Nonetheless, other possibilities still exist. The presence of an additional palatal root is rather uncommon and has been reported to have an incidence of 0.06 - 1.6% in varying populations studied. Whenever two palatal roots exist, one of them is the normal palatal root, the other is a supernumerary structure which can be located either mesiolingually (radix mesiolingualis) or distolingually (radix distolingualis). This case report describes successful endodontic treatment of a maxillary first molar with radix mesiolingualis and radix distolingualis. Identification of this variation was done through clinical examination along with the aid of multiangled radiographs, and an accurate assessment of this morphology was made with the help of a cone-beam computed tomography imaging. In addition to the literature review, this article also discusses the epidemiology, classifications, morphometric features, guidelines for diagnosis, and endodontic management of a maxillary first molar with extra-palatal root. PMID:27847755

Morphology of the Physiological Apical Foramen in Maxillary and Mandibular First Molars

PubMed Central

Abarca, J.; Zaror, C.; Monardes, H.; Hermosilla, V.; Muñoz, C.; Cantin, M.

2015-01-01

SUMMARY Information regarding the anatomy of the physiological apical foramen is limited. Knowing its diameter and shapes contributes to clinical work, specifically to the cleaning and shaping of the apical third. The aim of this ex vivo study was to determine the minimum and maximum diameters and shape of the physiological apical foramen in the roots of maxillary and mandibular first molars. A descriptive study was conducted on 89 recently extracted first molars. Roots 3–5 mm from the apex were sectioned and prepared for analysis at 40× magnification. The minimum and maximum diameters of each physiological foramen were measured using the program Motic Images plus 2.0 ML. The shape of the foramina, classified as round, oval or irregular, was determined by the difference between the maximum and minimum diameters. A total of 174 physiological foramina were analyzed. The average of the minimum and maximum diameters was between 0.24–0.33 mm in maxillary first molars and between 0.25–0.33 mm in mandibular first molars. In maxillary molars, the most common shape of the foramen was oval (50%), then irregular (32%), then round (18%). In mandibular molars, the oval shape was also the most frequent (59%), followed by irregular (23%) and round (18%). The findings of this study regarding the morphology of physiological apical foramina in first molars make it easier for the operator to choose the appropriately-sized instruments to perform endodontic therapy successfully. PMID:25937698

Morphology of the Physiological Apical Foramen in Maxillary and Mandibular First Molars.

PubMed

Abarca, J; Zaror, C; Monardes, H; Hermosilla, V; Muñoz, C; Cantin, M

2014-06-01

Information regarding the anatomy of the physiological apical foramen is limited. Knowing its diameter and shapes contributes to clinical work, specifically to the cleaning and shaping of the apical third. The aim of this ex vivo study was to determine the minimum and maximum diameters and shape of the physiological apical foramen in the roots of maxillary and mandibular first molars. A descriptive study was conducted on 89 recently extracted first molars. Roots 3-5 mm from the apex were sectioned and prepared for analysis at 40× magnification. The minimum and maximum diameters of each physiological foramen were measured using the program Motic Images plus 2.0 ML. The shape of the foramina, classified as round, oval or irregular, was determined by the difference between the maximum and minimum diameters. A total of 174 physiological foramina were analyzed. The average of the minimum and maximum diameters was between 0.24-0.33 mm in maxillary first molars and between 0.25-0.33 mm in mandibular first molars. In maxillary molars, the most common shape of the foramen was oval (50%), then irregular (32%), then round (18%). In mandibular molars, the oval shape was also the most frequent (59%), followed by irregular (23%) and round (18%). The findings of this study regarding the morphology of physiological apical foramina in first molars make it easier for the operator to choose the appropriately-sized instruments to perform endodontic therapy successfully.

Ultrasound-Guided Intervention for Treatment of Trigeminal Neuralgia: An Updated Review of Anatomy and Techniques

PubMed Central

Allam, Abdallah El-Sayed; Khalil, Adham Aboul Fotouh; Eltawab, Basma Aly; Wu, Wei-Ting

2018-01-01

Orofacial myofascial pain is prevalent and most often results from entrapment of branches of the trigeminal nerves. It is challenging to inject branches of the trigeminal nerve, a large portion of which are shielded by the facial bones. Bony landmarks of the cranium serve as important guides for palpation-guided injections and can be delineated using ultrasound. Ultrasound also provides real-time images of the adjacent muscles and accompanying arteries and can be used to guide the needle to the target region. Most importantly, ultrasound guidance significantly reduces the risk of collateral injury to vital neurovascular structures. In this review, we aimed to summarize the regional anatomy and ultrasound-guided injection techniques for the trigeminal nerve and its branches, including the supraorbital, infraorbital, mental, auriculotemporal, maxillary, and mandibular nerves. PMID:29808105

Endodontic management of an unusual foreign body in a maxillary central incisor

PubMed Central

Chand, Keerthi; Joesph, Sam; Varughese, Jolly Mary; Nair, Mali G; Prasanth, Santhosh

2013-01-01

The discovery of foreign bodies in the teeth is often diagnosed accidentally. It is commonly seen in children. These foreign objects may act as a potential source of infection and may later lead to a painful condition. Detailed case history, clinical and radiographic examinations are necessary to come to a conclusion about the nature, size, and location of the foreign body, and the difficulty involved in its retrieval. This paper discusses the types of foreign objects found in and around the teeth and reports an unusual case of a stapler pin in the root canal of a tooth, its retrieval, and associated management of the involved teeth. PMID:24082582

Chinook wind barosinusitis: an anatomic evaluation.

PubMed

Rudmik, Luke; Muzychuk, Adam; Oddone Paolucci, Elizabeth; Mechor, Brad

2009-01-01

Chinook, or föhn, is a weather phenomenon characterized by a rapid influx of warm, high-pressured winds into a specific location. Pressure changes associated with chinook winds induce facial pain similar to acute sinusitis. The purpose of this study was to determine the relationship between sinonasal anatomy and chinook headaches. Retrospective computed tomography (CT) sinonasal anatomy analysis of 38 patients with chinook headaches and 27 controls (no chinook headaches). The chinook headache status was blinded from the CT reviewer. Forty-one sinonasal anatomy variants, Lund-Mackay status, and sinus size (cm(3)) were recorded. There were three statistically significant sinonasal anatomy differences between patients with and without chinook headaches. The presence of a concha bullosa and sphenoethmoidal cell (Onodi cell) appeared to predispose to chinook headaches (p = 0.004). Chinook headache patients had larger maxillary sinus size (right, p = 0.015, and left, p = 0.002). The Lund-Mackay score was higher in the control patients (p = 0.003) indicating that chronic sinusitis does not play a role in chinook headaches. Chinook winds are a common source of facial pain and pressure. This is the first study to show that sinonasal anatomic variations may be a predisposing factor. Anatomic variants may induce facial pain by blocking the natural sinus ostia, thus preventing adequate pressure equilibrium.

Pediatric maxillary fractures.

PubMed

Yu, Jack; Dinsmore, Robert; Mar, Philip; Bhatt, Kirit

2011-07-01

Pediatric craniofacial structures differ from those of adults in many ways. Because of these differences, management of pediatric craniofacial fractures is not the same as those in adults. The most important differences that have clinical relevance are the mechanical properties, craniofacial anatomy, healing capacity, and dental morphology. This article will review these key differences and the management of pediatric maxillary fractures. From the mechanical properties' perspective, pediatric bones are much more resilient than adult bones; as such, they undergo plastic deformation and ductile failure. From the gross anatomic perspective, the relative proportion of the cranial to facial structures is much larger for the pediatric patients and the sinuses are not yet developed. The differences related to dentition and dental development are more conical crowns, larger interdental spaces, and presence of permanent tooth buds in the pediatric population. The fracture pattern, as a result of all the above, does not follow the classic Le Fort types. The maxillomandibular fixation may require circum-mandibular wires, drop wires, or Ivy loops. Interfragmentary ligatures using absorbable sutures play a much greater role in these patients. The use of plates and screws should take into consideration the future development with respect to growth centers and the location of the permanent tooth buds. Pediatric maxillary fractures are not common, require different treatments, and enjoy better long-term outcomes.

Cervical carotid and circle of willis arterial anatomy of macaque monkeys: a comparative anatomy study.

PubMed

Kumar, Nishant; Lee, John J; Perlmutter, Joel S; Derdeyn, Colin P

2009-07-01

Macaque monkeys are used in many research applications, including cerebrovascular investigations. However, detailed catalogs of the relevant vascular anatomy are scarce. We present our experience with macaque vessel patterns as determined by digital subtraction angiography of 34 different monkeys. We retrospectively analyzed digital subtraction angiograms obtained during experimental internal carotid artery (ICA) catheterization and subsequent injection of 1-methyl 4-phenyl 1,2,3,6-tetrahydropyridine. Results were catalogued according to vascular distribution and variants observed. Macaque monkeys have a bovine aortic arch. The carotid vessels generally bifurcate, but are occasionally observed to divide into three vessels. The external carotid gives rise primarily to two trunks: an occipital branch and a common vessel that subsequently gives off the lingual, facial, and superior thyroid arteries. The internal maxillary artery may be present as a terminal branch of the external carotid or as a branch of the occipital artery. The ICA is similar in course to that of the human. The anterior circle of Willis was intact in all monkeys in our study. Its primary difference from that of the human is the union of the bilateral anterior cerebral arteries as a single (azygous) median vessel. Macaque cervical carotid and circle of Willis arterial anatomy differs from humans in a couple of specific patterns. Knowledge of these differences and similarities between human and macaque anatomy is important in developing endovascular macaque models of human diseases, such as ischemic stroke.

Cervical Carotid and Circle of Willis Arterial Anatomy of Macaque Monkeys: A Comparative Anatomy Study

PubMed Central

Kumar, Nishant; Lee, John J.; Perlmutter, Joel S.; Derdeyn, Colin P.

2009-01-01

Macaque monkeys are used in many research applications, including cerebrovascular investigations. However, detailed catalogs of the relevant vascular anatomy are scarce. We present our experience with macaque vessel patterns as determined by digital subtraction angiography of 34 different monkeys. METHODS AND MATERIALS: We retrospectively analyzed digital subtraction angiograms obtained during experimental internal carotid artery catheterization and subsequent injection of 1-methyl 4-phenyl 1,2,3,6-tetrahydropyridine (MPTP). Results were catalogued according to vascular distribution and variants observed. RESULTS: Macaque monkeys have a bovine aortic arch. The carotid vessels generally bifurcate, but are occasionally observed to divide into three vessels. The external carotid gives rise primarily to two trunks: an occipital branch and a common vessel that subsequently gives off the lingual, facial, and superior thyroid arteries. The internal maxillary artery may be present as a terminal branch of the external carotid or as a branch of the occipital artery. The internal carotid artery is similar in course to that of the human. The anterior circle of Willis was intact in all monkeys in our study. Its primary difference from that of the human is the union of the bilateral anterior cerebral arteries as a single (azygous) median vessel. CONCLUSIONS: Macaque cervical carotid and circle of Willis arterial anatomy differs from humans in a couple of specific patterns. Knowledge of these differences and similarities between human and macaque anatomy is important in developing endovascular macaque models of human diseases, such as ischemic stroke. PMID:19434671

Present and future in the use of micro-CT scanner 3D analysis for the study of dental and root canal morphology.

PubMed

Grande, Nicola M; Plotino, Gianluca; Gambarini, Gianluca; Testarelli, Luca; D'Ambrosio, Ferdinando; Pecci, Raffaella; Bedini, Rossella

2012-01-01

The goal of the present article is to illustrate and analyze the applications and the potential of microcomputed tomography (micro-CT) in the analysis of tooth anatomy and root canal morphology. The authors performed a micro-CT analysis of the following different teeth: maxillary first molars with a second canal in the mesiobuccal (MB) root, mandibular first molars with complex anatomy in the mesial root, premolars with single and double roots and with complicated apical anatomy. The hardware device used in this study was a desktop X-ray microfocus CT scanner (SkyScan 1072, SkyScan bvba, Aartselaar, Belgium). A specific software ResolveRT Amira (Visage Imaging) was used for the 3D analysis and imaging. The authors obtained three-dimensional images from 15 teeth. It was possible to precisely visualize and analyze external and internal anatomy of teeth, showing the finest details. Among the 5 upper molars analyzed, in three cases, the MB canals joined into one canal, while in the other two molars the two mesial canals were separate. Among the lower molars two of the five samples exhibited a single canal in the mesial root, which had a broad, flat appearance in a mesiodistal dimension. In the five premolar teeth, the canals were independent; however, the apical delta and ramifications of the root canals were quite complex. Micro-CT offers a simple and reproducible technique for 3D noninvasive assessment of the anatomy of root canal systems.

Minimally invasive medial maxillectomy and the position of nasolacrimal duct: the CT study.

PubMed

Sieskiewicz, Andrzej; Buczko, Krzysztof; Janica, Jacek; Lukasiewicz, Adam; Lebkowska, Urszula; Piszczatowski, Bartosz; Olszewska, Ewa

2017-03-01

Several minimally invasive modifications of endoscopic medial maxillectomy have been proposed recently, with the least traumatic techniques utilizing the lacrimal recess as a route to enter the sinus. The aim of the study was to analyze the anatomy of medial maxillary wall in the region of nasolacrimal canal and, thus, to determine the capability of performing minimally invasive approach to the maxillary sinus leading through the lacrimal recess. The course of nasolacrimal canal and the distance between the anterior maxillary wall and the nasolacrimal canal (the width of lacrimal recess) were evaluated in 125 randomly selected computed tomography (CT) head examinations. The proportion of cases with unfavorable anatomical conditions (lacrimal recess too narrow to accept a 4 mm optic) to perform minimally invasive middle maxillectomy was assessed. The width of lacrimal recess, measured at the level of the inferior turbinate attachment, varied between 0 and 15.2 mm and was related to slanted course of nasolacrimal canal. The more perpendicular the axis of the canal to the nasal flor, the narrower the lacrimal recess. In about 16% of cases, lacrimal recess width was less than 4 mm and in 14.4% it was missing. The endoscopic approach to maxillary sinus leading through lacrimal recess is possible in about 70% of patients. In the remaining group of patients when the lacrimal recess is too narrow, this type of approach may be difficult to perform without damaging the piriform aperture rim or bony framework of nasolacrimal duct, or it may be impracticable when lacrimal recess is missing.

Canal Configuration of Mesiobuccal Roots in Permanent Maxillary First Molars in Iranian Population: A Systematic Review.

PubMed

Naseri, Mandana; Kharazifard, Mohammad Javad; Hosseinpour, Sepanta

2016-11-01

It is essential for clinicians to have adequate knowledge about root canal configurations; although its morphology varies largely in different ethnicities and even in different individuals with the same ethnic background. The current study aims to review the root canal configurations of mesiobuccal roots of maxillary first molars in an Iranian population based on different epidemiological studies. A comprehensive search was conducted to retrieve articles related to root canal configuration and prevalence of each type of root canal based on Vertucci's classification for the mesiobuccal root of maxillary first molars. An electronic search was conducted in Medline, Scopus and Google Scholar from January 1984 to September 2015. The articles were evaluated and methods, population, number of teeth and percentage of each root canal type evaluated in each study were summarized in the data table. Websites such as http://www.magiran.com/ , http://health.barakatkns.com/journal-internal-list and www.sid.ir were used to search all related studies published in Persian. Totally, out of nine studies conducted on the Iranian populations in nine provinces of Iran and 798 teeth, the Vertucci's type I was the most common type (35.70%), followed by type II (30.37%), type IV (16.66%), type III (7.93%) and type V (2.61%). From this review article, it is concluded that the root canal morphology of mesiobuccal roots of maxillary first molars in the Iranian population predominantly has more than one canal. Therefore, careful evaluation of radiographs and anatomy of the pulp chamber is essential in order to achieve a successful root canal therapy.

Temporary Blindness after Inferior Alveolar Nerve Block.

PubMed

Barodiya, Animesh; Thukral, Rishi; Agrawal, Shaila Mahendra; Rai, Anshul; Singh, Siddharth

2017-03-01

Inferior Alveolar Nerve Block (IANB) anaesthesia is one of the common procedures in dental clinic. This procedure is safe, but complications may still occur. Ocular complications such as diplopia, loss of vision, or ophthalmoplegia are extremely rare. This case report explains an event where due to individual anatomic variation of the sympathetic vasoconstrictor nerve and maxillary and middle meningeal arteries, intravascular administration of anaesthetic agent caused unusual ocular signs and symptoms such as temporary blindness.

Anatomical variations and sinusitis.

PubMed

Jorissen, M; Hermans, R; Bertrand, B; Eloy, P

1997-01-01

Paranasal sinus anatomy and variations have gained interest with the introduction of functional endoscopic sinus surgery and the concept of the ostiomeatal complex. Anatomical variations can be divided in structural abnormalities, (increased) pneumatization and supplementary openings. Most anatomical variations are equally found in control and sinusitis patients. The anatomical variations which are most commonly associated with sinus pathology are septal deviations, true conchae bullosae and supplementary maxillary ostia but the latter one only when recycling is present. The knowledge of anatomical variations is most important in the surgical management and specifically in the prevention of complications.

Anatomy and Disorders of the Oral Cavity of Miscellaneous Exotic Companion Mammals.

PubMed

Lennox, Angela M; Miwa, Yasutsugu

2016-09-01

Unusual mammalian species such as the hedgehog, sugar glider, and miniature pig are encountered with increasing frequency in exotic companion medicine. Disease of the oral cavity can occur in any species; although occasionally encountered in exotic mammalian species, it is rarely described in the literature. Anatomy and dentition vary significantly; diagnosis and treatment are often extrapolated from that known in other species. The best-documented disease of the oral cavity in this group of species is oral neoplasia in the hedgehog. Copyright © 2016 Elsevier Inc. All rights reserved.

Prevalence of an unusual hypoplastic defect of the permanent maxillary lateral incisor in great apes.

PubMed

Hannibal, Darcy L

2017-02-01

In this article, I describe a previously unreported maxillary lateral incisor defect (MLID) of the enamel in great apes and evaluate potential general causes (genetic, systemic stress, or localized disturbance), as well as examine differences in prevalence among the represented taxa. This defect occurred only on the labial surface of the maxillary lateral incisor and extended from the cervical-mesial quarter of the crown to the mesial edge of the cementoenamel junction (CEJ). The study sample consisted of 136 great ape specimens, including 41 gorillas, 25 chimpanzees, and 70 orangutans from the Smithsonian's National Museum of Natural History great ape collection. I used logistic regression to assess the prevalence of this defect in the sample and a binomial probability test for bilaterality. This defect of the maxillary lateral incisor is the second most common defect I observed in the study sample (30.1% of individuals affected), and was more likely to occur in individuals with linear enamel hypoplasia (LEH) and pit defects than those without these defects. Among specimens with both maxillary lateral incisors present, the defect was mostly bilateral. Pan and Pongo were significantly more likely to exhibit the defect than Gorilla. Between Pongo species, Pongo pygmaeus was significantly more likely to exhibit the defect than Pongo abelii. Between subspecies of Gorilla, although Gorilla gorilla gorilla exhibited the defect and Gorilla gorilla beringei did not, the difference was not significant. No sex differences were evident in this sample. The prevalence of this defect indicates it is not hereditary. The bilateral trend indicates a systemic cause, although the high inter-tooth specificity suggests a local disturbance and a combination of both is possible. © 2016 Wiley Periodicals, Inc.

Anatomical landmarks for the localization of the greater palatine foramen – a study of 1200 head CTs, 150 dry skulls, systematic review of literature and meta-analysis

PubMed Central

Tomaszewska, Iwona M; Tomaszewski, Krzysztof A; Kmiotek, Elizabeth K; Pena, Iwona Z; Urbanik, Andrzej; Nowakowski, Michał; Walocha, Jerzy A

2014-01-01

Accurate knowledge of greater palatine foramen (GPF) anatomy is necessary when performing a variety of anaesthesiological, dental or surgical procedures. The first aim of this study was to localize the GPF in relation to multiple anatomical landmarks. The second aim was to perform a systematic review of literature, and to conduct a meta-analysis on the subject of GPF position to aid clinicians in their practice. One-hundred and fifty dry, adult, human skulls and 1200 archived head computed tomography scans were assessed and measured in terms of GPF relation to other anatomical reference points. A systematic literature search was performed using the PubMed, Embase and Web of Science databases, and a meta-analysis on the subject of GPF relation to the maxillary molars was conducted. On average, in the Polish population, the GPF was positioned 15.9 ± 1.5 mm from the midline maxillary suture (MMS), 3.0 ± 1.2 mm from the alveolar ridge (AR) and 17.0 ± 1.5 mm from the posterior nasal spine (PNS); 74.7% of GPF were positioned opposite the third maxillary molar (M3). Twenty-seven studies were included in the systematic review and 23 in the meta-analysis (n = 6927 GPF). The pooled prevalence of the GPF being positioned opposite the M3 was 63.9% (95% confidence interval = 56.6–70.9%). Concluding, the GPF is most often located opposite the M3 in the majority of the world's populations. The maxillary molars are the best landmarks for locating the GPF. In edentulous patients the most useful points for approximating the position of the GPF are the AR, MMS and PNS. This study introduces an easy and repeatable classification to reference the GPF to the maxillary molars. PMID:25131842

Analysis of the internal anatomy of maxillary first molars by using different methods.

PubMed

Baratto Filho, Flares; Zaitter, Suellen; Haragushiku, Gisele Aihara; de Campos, Edson Alves; Abuabara, Allan; Correr, Gisele Maria

2009-03-01

The success of endodontic treatment depends on the identification of all root canals so that they can be cleaned, shaped, and obturated. This study investigated internal morphology of maxillary first molars by 3 different methods: ex vivo, clinical, and cone beam computed tomography (CBCT) analysis. In all these different methods, the number of additional root canals and their locations, the number of foramina, and the frequency of canals that could or could not be negotiated were recorded. In the ex vivo study, 140 extracted maxillary first molars were evaluated. After canals were accessed and detected by using an operating microscope, the teeth with significant anatomic variances were cleared. In the clinical analysis, the records of 291 patients who had undergone endodontic treatment in a dental school during a 2-year period were used. In the CBCT analysis, 54 maxillary first molars were evaluated. The ex vivo assessment results showed a fourth canal frequency in 67.14% of the teeth, besides a tooth with 7 root canals (0.72%). Additional root canals were located in the mesiobuccal root in 92.85% of the teeth (17.35% could not be negotiated), and when they were present, 65.30% exhibited 1 foramen. Clinical assessment showed that 53.26%, 0.35%, and 0.35% of the teeth exhibited 4, 5, and 6 root canals, respectively. Additional root canals were located in this assessment in mesiobuccal root in 95.63% (27.50% could not be negotiated), and when they were present, 59.38% exhibited 1 foramen. CBCT results showed 2, 4, and 5 root canals in 1.85%, 37.05%, and 1.85% of the teeth, respectively. When present, additional canals showed 1 foramen in 90.90% of the teeth studied. This study demonstrated that operating microscope and CBCT have been important for locating and identifying root canals, and CBCT can be used as a good method for initial identification of maxillary first molar internal morphology.

CBCT in orthodontics: assessment of treatment outcomes and indications for its use

PubMed Central

Nervina, J M

2015-01-01

Since its introduction into dentistry in 1998, CBCT has become increasingly utilized for orthodontic diagnosis, treatment planning and research. The utilization of CBCT for these purposes has been facilitated by the relative advantages of three-dimensional (3D) over two-dimensional radiography. Despite many suggested indications of CBCT, scientific evidence that its utilization improves diagnosis and treatment plans or outcomes has only recently begun to emerge for some of these applications. This article provides a comprehensive and current review of key studies on the applications of CBCT in orthodontic therapy and for research to decipher treatment outcomes and 3D craniofacial anatomy. The current diagnostic and treatment planning indications for CBCT include impacted teeth, cleft lip and palate and skeletal discrepancies requiring surgical intervention. The use of CBCT in these and other situations such as root resorption, supernumerary teeth, temporomandibular joint (TMJ) pathology, asymmetries and alveolar boundary conditions should be justified on the basis of the merits relative to risks of imaging. CBCT has also been used to assess 3D craniofacial anatomy in health and disease and of treatment outcomes including that of root morphology and angulation; alveolar boundary conditions; maxillary transverse dimensions and maxillary expansion; airway morphology, vertical malocclusion and obstructive sleep apnoea; TMJ morphology and pathology contributing to malocclusion; and temporary anchorage devices. Finally, this article utilizes findings of these studies and current voids in knowledge to provide ideas for future research that could be beneficial for further optimizing the use of CBCT in research and the clinical practice of orthodontics. PMID:25358833

Endodontic management of mandibular third molar with three mesial roots using spiral computed tomography scan as a diagnostic aid: a case report.

PubMed

Tomar, Deepak; Dhingra, Anil; Tomer, Anil; Sharma, Shalini; Sharma, Vivek; Miglani, Anjali

2013-05-01

Aberrant root canal anatomy is diagnostically and clinically challenging for clinicians. The most common root canal configuration of human molars is 2 roots and 3 canals, but various combinations may still exist. Third molars are known to have the most unusual anatomy among human teeth. Restorative, prosthetic, and orthodontic considerations often require endodontic treatment of third molars in order for them to be retained as functional components of the dental arch. The present case report demonstrates unusual root canal morphology of the mandibular third molar. Roentgenographic examination, which included spiral CT scan, revealed 3 separate mesial roots in tooth #48 with 3 independent canals and 3 canal orifices, indicating an endodontic rarity. The present case report puts impetus on exploration of additional canals using advanced diagnostic aids, such as spiral computed tomography, which can have a huge impact on the successful outcome of endodontic therapy. Copyright © 2013 Elsevier Inc. All rights reserved.

Root canal morphology of primary molars: a micro-computed tomography study.

PubMed

Fumes, A C; Sousa-Neto, M D; Leoni, G B; Versiani, M A; da Silva, L A B; da Silva, R A B; Consolaro, A

2014-10-01

This was to investigate the root canal morphology of primary molar teeth using micro-computed tomography. Primary maxillary (n = 20) and mandibular (n = 20) molars were scanned at a resolution of 16.7 μm and analysed regarding the number, location, volume, area, structured model index (SMI), area, roundness, diameters, and length of canals, as well as the thickness of dentine in the apical third. Data were statistically compared by using paired-sample t test, independent sample t test, and one-way analysis of variance with significance level set as 5%. Overall, no statistical differences were found between the canals with respect to length, SMI, dentine thickness, area, roundness, and diameter (p > 0.05). A double canal system was observed in the mesial and mesio-buccal roots of the mandibular and maxillary molars, respectively. The thickness in the internal aspect of the roots was lower than in the external aspect. Cross-sectional evaluation of the roots in the apical third showed flat-shaped canals in the mandibular molars and ribbon- and oval-shaped canals in the maxillary molars. External and internal anatomy of the primary first molars closely resemble the primary second molars. The reported data may help clinicians to obtain a thorough understanding of the morphological variations of root canals in primary molars to overcome problems related to shaping and cleaning procedures, allowing appropriate management strategies for root canal treatment.

Comparison of the Diagnostic Image Quality of the Canine Maxillary Dentoalveolar Structures Obtained by Cone Beam Computed Tomography and 64-Multidetector Row Computed Tomography

PubMed Central

Soukup, Jason W.; Drees, Randi; Koenig, Lisa J.; Snyder, Christopher J.; Hetzel, Scott; Miles, Chanda R.; Schwarz, Tobias

2016-01-01

Summary The objective of this blinded study was to validate the use of cone beam computed tomography (CT) for imaging of the canine maxillary dentoalveolar structures by comparing its diagnostic image quality with that of 64-multidetector row CT. Sagittal slices of a tooth-bearing segment of the maxilla of a commercially purchased dog skull embedded in methyl methacrylate were obtained along a line parallel with the dental arch using a commercial histology diamond saw. The slice of tooth-bearing bone that best depicted the dentoalveolar structures was chosen and photographed. The maxilla segment was imaged with cone beam CT and 64-multidetector row CT. Four blinded evaluators compared the cone beam CT and 64-multidetector row CT images and image quality was scored as it related to the anatomy of dentoalveolar structures. Trabecular bone, enamel, dentin, pulp cavity, periodontal ligament space, and lamina dura were scored. In addition, a score depicting the evaluators overall impression of the image was recorded. Images acquired with cone beam CT were found to be significantly superior in image quality to images acquired with 64-multidetector row CT overall, and in all scored categories. In our study setting, cone beam CT was found to be a valid and clinically superior imaging modality for the canine maxillary dentoalveolar structures when compared to 64-multidetector row CT. PMID:26415384

A nonsurgical endodontic treatment in open-apex and immature teeth affected by dens invaginatus: using a collagen membrane as an apical barrier.

PubMed

Gharechahi, Maryam; Ghoddusi, Jamileh

2012-02-01

The authors' objective in this case report is to demonstrate an effective nonsurgical endodontic treatment in open-apex teeth affected by dens invaginatus (DI) by using a collagen membrane as an apical barrier and using a mineral trioxide aggregate (MTA) apical plug. . The authors present two cases of DI with open apexes in maxillary lateral incisors. In the first case, an adolescent had bilateral Oehlers type II DI and extensive periradicular radiolucency, internal root resorption and a vestibular fistula in the left maxillary lateral incisor. In the second case, an adult had Oehlers type II DI and an incomplete apex in the left maxillary lateral incisor. For both patients, the clinician placed a collagen membrane through the apexes of the left maxillary incisors to provide a resorbable extraradicular barrier against which MTA cement could be packed. The clinician obturated the adolescent's right lateral incisor. In the adolescent, the vestibular sinus tract was closed after one week. At subsequent follow-up examinations, the periradicular regions were completely healed, and postoperative radiographs revealed good bone healing in the lateral incisors. The teeth were asymptomatic and healing was achieved without any need for further endodontic surgical intervention. In the adult patient, the tooth was symptom free after one week, and radiography performed six months after the procedure showed complete healing. and Despite complex anatomy and diagnoses of DI and open apexes, both patients successfully underwent nonsurgical endodontic treatment involving the use of a collagen membrane and an MTA apical plug. Using an extraradicular barrier clinically can help improve the adaptation of MTA in the apexes of open-apex teeth to achieve a complete seal.

Canal Configuration of Mesiobuccal Roots in Permanent Maxillary First Molars in Iranian Population: A Systematic Review

PubMed Central

Naseri, Mandana; Kharazifard, Mohammad Javad

2016-01-01

Objectives: It is essential for clinicians to have adequate knowledge about root canal configurations; although its morphology varies largely in different ethnicities and even in different individuals with the same ethnic background. The current study aims to review the root canal configurations of mesiobuccal roots of maxillary first molars in an Iranian population based on different epidemiological studies. Materials and Methods: A comprehensive search was conducted to retrieve articles related to root canal configuration and prevalence of each type of root canal based on Vertucci’s classification for the mesiobuccal root of maxillary first molars. An electronic search was conducted in Medline, Scopus and Google Scholar from January 1984 to September 2015. The articles were evaluated and methods, population, number of teeth and percentage of each root canal type evaluated in each study were summarized in the data table. Websites such as http://www.magiran.com/ , http://health.barakatkns.com/journal-internal-list and www.sid.ir were used to search all related studies published in Persian. Results: Totally, out of nine studies conducted on the Iranian populations in nine provinces of Iran and 798 teeth, the Vertucci’s type I was the most common type (35.70%), followed by type II (30.37%), type IV (16.66%), type III (7.93%) and type V (2.61%). Conclusions: From this review article, it is concluded that the root canal morphology of mesiobuccal roots of maxillary first molars in the Iranian population predominantly has more than one canal. Therefore, careful evaluation of radiographs and anatomy of the pulp chamber is essential in order to achieve a successful root canal therapy. PMID:28243306

An incidental finding on a diagnostic CBCT: a case report.

PubMed

Lyros, Ioannis; Fora, Eleni; Damaskos, Spyridon; Stanko, Peter; Tsolakis, Apostolos

2014-05-01

It is known that Cone Beam Computed Tomography (CBCT) provides reliable spatial data and has many clinical applications for dental and particularly orthodontic patients. The present article provides a short review of the literature and reports an unusual CBCT finding in an orthodontic patient referred for the assessment of impacted upper canines. A unilateral lesion in the left maxillary sinus, was an incidental finding. Following a histological examination, which revealed unilateral nasal polyps, surgical removal was performed as the treatment of choice.

[Features of maxillary and mandibular nerves imaging during stem regional blockades. From paresthesia to 3D-CT guidance].

PubMed

Zaytsev, A Yu; Nazaryan, D N; Kim, S Yu; Dubrovin, K V; Svetlov, V A; Khovrin, V V

2014-01-01

There are difficulties in procedure of regional block of 2 and 3 brunches of the trigeminal nerve despite availability of many different methods of nerves imaging. The difficulties are connected with complex anatomy structure. Neurostimulation not always effective and as a rule, is accompanied with wrong interpretation of movement response on stimulation. The changing of the tactics on paraesthesia search improves the situation. The use of new methods of nerves imaging (3D-CT) also allows decreasing the frequency of fails during procedure of regional block of the brunches of the trigeminal nerve.

Zachsia zenkewitschi (Teredinidae), a Rare and Unusual Seagrass Boring Bivalve Revisited and Redescribed.

PubMed

Shipway, J R; O'Connor, R; Stein, D; Cragg, S M; Korshunova, T; Martynov, A; Haga, T; Distel, D L

2016-01-01

The sea-grass borer Zachsia zenkewitschi belongs to a group of economically and ecologically important bivalves, commonly referred to as shipworms. The sole recognized representative of the genus Zachsia, this species displays an unusual life history and reproductive strategy that is now understood to include: environmental sex determination of free swimming larvae, extreme sexual and size dimorphism between males and females, internal fertilization, maintenance of often large harems of male dwarfs within a specialized cavity of the female mantle, and complex maternal care of larvae in specialized brood pouches within the gill. It is also the only shipworm species known to burrow in sea grass rhizomes rather than terrestrial wood. Although Z. zenkewitschi is rare and little studied, understanding of its biology and anatomy has evolved substantially, rendering some aspects of its original description inaccurate. Moreover, no existing type specimens are known for this species. In light of these facts, we designate a neotype from among specimens recently collected at the type location, and undertake a re-description of this species, accounting for recent reinterpretation of its life history and functional anatomy.

16-Year follow-up of an avulsed maxillary central incisor after replantation following 10-h storage: An unusual case.

PubMed

Kırzıoğlu, Zuhal; Erken Güngör, Özge; Erdoğan, Yıldırım

2017-07-01

Tooth avulsion is a type of dental injury defined as the complete displacement of a tooth out of the alveolar socket, and the lack of prompt treatment measures can result in the loss of function, poor quality of life, and psychological and social problems. However, several factors may not permit the immediate replantation of an avulsed tooth; therefore, delayed replantation has emerged as an alternative to meet the esthetic, functional, and psychological demands of patients. Here it was described that the successful replantation of an avulsed maxillary central incisor in a 9-year-old boy who presented at the clinic with the tooth stored in unfavorable conditions as dry and then in olive oil-milk mixture almost 10 h after the event. The tooth has remained in its socket healthy for 16 years after treatment. The patient was satisfied with both esthetics and function. © 2017 Special Care Dentistry Association and Wiley Periodicals, Inc.

Giant left paraduodenal hernia

PubMed Central

Cundy, Thomas P; Di Marco, Aimee N; Hamady, Mohamad; Darzi, Ara

2014-01-01

Left paraduodenal hernia (LPDH) is a retrocolic internal hernia of congenital origin that develops through the fossa of Landzert, and extends into the descending mesocolon and left portion of the transverse mesocolon. It carries significant overall risk of mortality, yet delay in diagnosis is not unusual due to subtle and elusive features. Familiarisation with the embryological and anatomical features of this rare hernia is essential for surgical management. This is especially important with respect to vascular anatomy as major mesenteric vessels form intimate relationships with the ventral rim and anterior portion of the hernia. As an illustrative case, we describe our experience with a striking example of LPDH, particularly focusing on the inherent diagnostic challenges and associated critical vascular anatomy. We advocate the role of diagnostic laparoscopy; however caution that decision to safely proceed with laparoscopic repair must occur only with confident identification of the vascular anatomy involved. PMID:24792018

Endodontic management of radix paramolaris with six canals: a clinical case report.

PubMed

Acharya, N; Singh, A; Samant, P S; Gautam, V

2013-01-01

Endodontic therapy of mandibular molars is a challenging task due to its varied root canal morphology. A mandibular first molar with additional buccal root (Radix paramolaris) and additional distolingual root (Radix Entomolaris) is an example of its varied anatomy. A successful management of atypical root canal configurations is an important aspect in determining the success rate of root canal therapy. The detail knowledge of the root morphology and canal anatomy allows the clinician for accurate location of the extra roots and canals and accordingly the refinement of the access cavity for the stress free entry of complex anatomy. Hence, for a successful root canal therapy, clinician must be aware of the external and internal anatomic variations .The aim of this clinical case report is to present and describe the unusual presence of two separate mesial roots and six root canals in mandibular first molar, detected during routine endodontic therapy.

Surgical management of lateral incisor with type II dens invaginatus and a periapical pathosis: A case report with 1-year follow-up.

PubMed

Lakshmi, V Naga; Varma, K Madhu; Sajjan, Girija S; Rambabu, Tanikonda

2017-01-01

Dens invaginatus is a relatively common dental malformation resulting from an infolding of enamel organ into the dental papilla varying in depth into the tooth tissues. Complex morphological anatomy associated with the pulpal pathology presents inaccessibility to completely remove the necrotic pulp tissues and hence poses challenges in rendering endodontic treatment. A combination of nonsurgical and surgical management in treating such cases is advisable depending on the presented variations. The present case reports the surgical endodontic treatment of an immature maxillary lateral incisor with type II dens invaginatus and periapical pathology.

Surgical management of lateral incisor with type II dens invaginatus and a periapical pathosis: A case report with 1-year follow-up

PubMed Central

Lakshmi, V. Naga; Varma, K. Madhu; Sajjan, Girija S.; Rambabu, Tanikonda

2017-01-01

Dens invaginatus is a relatively common dental malformation resulting from an infolding of enamel organ into the dental papilla varying in depth into the tooth tissues. Complex morphological anatomy associated with the pulpal pathology presents inaccessibility to completely remove the necrotic pulp tissues and hence poses challenges in rendering endodontic treatment. A combination of nonsurgical and surgical management in treating such cases is advisable depending on the presented variations. The present case reports the surgical endodontic treatment of an immature maxillary lateral incisor with type II dens invaginatus and periapical pathology. PMID:28761255

Finite element analysis of maxillary bone stress caused by Aramany Class IV obturator prostheses.

PubMed

Miyashita, Elcio Ricardo; Mattos, Beatriz Silva Câmara; Noritomi, Pedro Yoshito; Navarro, Hamilton

2012-05-01

The retention of an Aramany Class IV removable partial dental prosthesis can be compromised by a lack of support. The biomechanics of this obturator prosthesis result in an unusual stress distribution on the residual maxillary bone. This study evaluated the biomechanics of an Aramany Class IV obturator prosthesis with finite element analysis and a digital 3-dimensional (3-D) model developed from a computed tomography scan; bone stress was evaluated according to the load placed on the prosthesis. A 3-D model of an Aramany Class IV maxillary resection and prosthesis was constructed. This model was used to develop a finite element mesh. A 120 N load was applied to the occlusal and incisal platforms corresponding to the prosthetic teeth. Qualitative analysis was based on the scale of maximum principal stress; values obtained through quantitative analysis were expressed in MPa. Under posterior load, tensile and compressive stresses were observed; the tensile stress was greater than the compressive stress, regardless of the bone region, and the greatest compressive stress was observed on the anterior palate near the midline. Under an anterior load, tensile stress was observed in all of the evaluated bone regions; the tensile stress was greater than the compressive stress, regardless of the bone region. The Aramany Class IV obturator prosthesis tended to rotate toward the surgical resection when subjected to posterior or anterior loads. The amount of tensile and compressive stress caused by the Aramany Class IV obturator prosthesis did not exceed the physiological limits of the maxillary bone tissue. (J Prosthet Dent 2012;107:336-342). Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Anatomic and Quantitative Temporal Bone CT for Preoperative Assessment of Branchio-Oto-Renal Syndrome.

PubMed

Ginat, D T; Ferro, L; Gluth, M B

2016-12-01

We describe the temporal bone computed tomography (CT) findings of an unusual case of branchio-oto-renal syndrome with ectopic ossicles that are partially located in the middle cranial fossa. We also describe quantitative temporal bone CT assessment pertaining to cochlear implantation in the setting of anomalous cochlear anatomy associated with this syndrome.

Microcomputed tomography analysis of mesiobuccal orifices and major apical foramen in first maxillary molars.

PubMed

Spagnuolo, Gianrico; Ametrano, Gianluca; D'Antò, Vincenzo; Formisano, Anna; Simeone, Michele; Riccitiello, Francesco; Amato, Massimo; Rengo, Sandro

2012-01-01

Aim of the study was to determined by microcomputed tomography (µCT) the horizontal distance between the main (MB1) and the second mesiobuccal canal (MB2) orifices, the vertical distance between the MB1 and MB2 orifices planes, and the distance between the anatomic apex and major apical foramen (AF). Furthermore, we characterized the entire internal and external anatomy of the MB, distalbuccal (DB) and palatal (P) maxillary first molars roots. Twenty-two intact extracted first maxillary molars were scanned by X-ray computed transaxial µCT and then 2D and 3D images were processed and analyzed. The results showed that 77.27% of the mesiobuccal (MB) roots presented a second MB canal, and 29.41% of the MB2 were independent from the MB1 canals. In 15 teeth, there were three root canal orifices on the chamber floor, and 10 of these teeth presented MB2 canals. The mean vertical distance between the MB1 and MB2 planes was 1.68 ± 0.83 mm. Seven teeth had four orifices. The mean horizontal interorificial distance between the MB1 and MB2 orifices was 1.21 ± 0.5 mm. Accessory canals were observed in 33.33% of the roots, loops in 6.06%, while isthmuses were found in 15 of the 22 MB roots. Of the total roots, 74.24% presented one foramen, while all of the roots showed a major apical foramen that was not coincident with the anatomic apex. Our µCT analysis provided interesting features on the horizontal and vertical distance between the MB1 and MB2 orifices and on the distance of AF and anatomic apex. These results have an important clinical value because might support the endodontist in the recruitment, negotiation and obturation of maxillary first molar canal system.

Microcomputed Tomography Analysis of Mesiobuccal Orifices and Major Apical Foramen in First Maxillary Molars

PubMed Central

Spagnuolo, Gianrico; Ametrano, Gianluca; D’Antò, Vincenzo; Formisano, Anna; Simeone, Michele; Riccitiello, Francesco; Amato, Massimo; Rengo, Sandro

2012-01-01

Objective: Aim of the study was to determined by microcomputed tomography (µCT) the horizontal distance between the main (MB1) and the second mesiobuccal canal (MB2) orifices, the vertical distance between the MB1 and MB2 orifices planes, and the distance between the anatomic apex and major apical foramen (AF). Furthermore, we characterized the entire internal and external anatomy of the MB, distalbuccal (DB) and palatal (P) maxillary first molars roots. Materials and Methods: Twenty-two intact extracted first maxillary molars were scanned by X-ray computed transaxial µCT and then 2D and 3D images were processed and analyzed. Results: The results showed that 77.27% of the mesiobuccal (MB) roots presented a second MB canal, and 29.41% of the MB2 were independent from the MB1 canals. In 15 teeth, there were three root canal orifices on the chamber floor, and 10 of these teeth presented MB2 canals. The mean vertical distance between the MB1 and MB2 planes was 1.68 ± 0.83 mm. Seven teeth had four orifices. The mean horizontal interorificial distance between the MB1 and MB2 orifices was 1.21 ± 0.5 mm. Accessory canals were observed in 33.33% of the roots, loops in 6.06%, while isthmuses were found in 15 of the 22 MB roots. Of the total roots, 74.24% presented one foramen, while all of the roots showed a major apical foramen that was not coincident with the anatomic apex. Conclusions: Our µCT analysis provided interesting features on the horizontal and vertical distance between the MB1 and MB2 orifices and on the distance of AF and anatomic apex. Clinical Relevance: These results have an important clinical value because might support the endodontist in the recruitment, negotiation and obturation of maxillary first molar canal system. PMID:22905069

Root Canal Treatment of Mandibular Second Premolar with Three Separate Roots and Canals Using Spiral Computed Tomographic

PubMed Central

Hariharavel, V. P.; Kumar, A. Ashok; Ganesh, C.; Aravindhan, R.

2014-01-01

Anatomic and internal morphology of a root canal system is more complex and differs for each individual tooth of which mandibular premolars have earned the reputation for having aberrant anatomy. The occurrence of three canals with three separate foramina in mandibular second premolars is very rare. A wider knowledge on both clinical and radiological anatomy especially spiral computed tomographic is absolutely essential for the success of endodontic treatment. These teeth may require skillful and special root canal special shaping and obturating techniques. This paper reports an unusual case of a mandibular second premolar with atypical canal pattern that was successfully treated endodontically. PMID:25101187

Palatal versus vestibular piezoelectric window osteotomy for maxillary sinus elevation: a comparative clinical study of two surgical techniques.

PubMed

Stübinger, Stefan; Saldamli, Belma; Seitz, Oliver; Sader, Robert; Landes, Constantin A

2009-05-01

The goal of this study was to compare the surgical advantages and disadvantages of a new palatal access osteotomy for sinus elevation with a conventional lateral approach. In 32 patients, either a palatal (n = 16) or a lateral (n = 16) osteotomy to the maxillary sinus was performed under local anesthesia. The palatal access included a circular paramarginal incision and elevation of a palatal mucosal flap based on a median pedicle. The lateral access was performed by vestibular standard incision and development of a mucoperiosteal flap with a vestibular and superior basis. For all osteotomies a piezoelectric device was used. The sinus cavity was augmented with synthetic nanostructured hydroxyapatite graft material. Intraoperative complications during both procedures were minimal and wound healing was uneventful. Membrane perforation occurred in 19% of the palatal group and in 19% of the lateral group. Soft tissue management of the palatal technique was superior to that of the lateral approach, because the vestibular anatomy was not altered and consequently no disharmonious soft tissue scarring and no postoperative swelling occurred. The palatal approach permitted higher postoperative comfort, especially for edentulous patients, because full dentures could be incorporated directly after surgery with almost perfect fit.

Anatomy and ontogeny of a novel hemodynamic organ in zebrafish.

PubMed

Binelli, Erica A; Luna, Alejandra N; LeClair, Elizabeth E

2014-12-01

The zebrafish maxillary barbel can protract and retract in response to stimuli, and appears connected to a prominent blood sinus on the lateral aspect of the maxillary bone. However, the mechanism of barbel movement is not described. Using whole-mount phalloidin staining of the sinus region, we observed long filamentous actin cables, suggesting highly organized vascular smooth muscle cells, surrounding an endothelial chamber. Although the chamber is variably filled by erythrocytes in vivo, cardiac injection of fluorescent dextrans shows that it consistently contains plasma. Full-thickness confocal imaging of dextran-injected adults containing EGFP(+) endothelial cells revealed a vascular complex with three compartments, here named the distal bulb, central chamber, and accessory chamber. The early ontogeny of all three compartments was confirmed in a whole-mount series of Tg(fli1a:EGFP) juveniles. In wild type adults, the fine structure of each chamber was studied using paraffin- and plastic-section histochemistry and transmission electron microscopy. The distal bulb and central chamber have smooth muscle coats with luminally-elongated septa, forming semi-detached blood-filled lacunae. The central chamber walls and septa are extensively innervated by small, unmyelinated axons, as confirmed by immunohistochemical detection of acetylated tubulin, a component of axonal cytoplasm. The accessory chamber appears neither innervated nor muscularized, but is an endothelial cul-de-sac with a thickened elastic adventitia, suggesting an extensible fluid reservoir. We propose that we have identified a new organ in zebrafish, the maxillary barbel blood sinus, whose neurovascular specializations may contribute to zebrafish sensory biology and appendage control. © 2014 Wiley Periodicals, Inc.

Computed tomographic and radiographic examination of dental structures in South American camelid specimen of different ages.

PubMed

Rostami, Abdolrazagh; Geissbühler, Urs; Schellenberger, Frank; Zanolari, Patrik

2014-01-06

Tooth root problems and periodontal diseases are common in South American camelids (SAC). The objective was to evaluate and optimize the imaging technique for dental radiography in SAC and to describe the radiographic and computed tomographic (CT) anatomy of normal teeth at different ages. In this study, the heads of 20 healthy SAC slaughtered for meat production or euthanized for reasons not related to dental problems included 7 female and 10 male llamas and 3 male alpacas. Using a standardized protocol, radiographs and CT scans of the 20 specimen were performed. The most useful radiographic projections for mandibular and maxillary cheek teeth evaluation turned out to be lateral30°ventral-laterodorsal and lateral30°dorsal-lateroventral with slight separation of the dental arcades respectively. Digital radiographic and CT appearance of the mandibular and maxillary teeth were described from the beginning of mineralization till maturity. In addition the normal range of the CT radio density of different cheek teeth and different dental tissues were measured. Hounsfield units of different dental tissues of SAC turned out to be similar to equids. Deviation, shortening and partial destruction of the distal tooth root of mandibular 09's and 10's and of maxillary 09's was observed and the existence of a common pulp chamber in younger teeth was revealed. The present study provides information about the dental imaging morphology in clinically healthy SAC. This basic information provides fundamental knowledge for evaluating images and planning treatments in clinically affected animals.

Computed tomographic and radiographic examination of dental structures in South American camelid specimen of different ages

PubMed Central

2014-01-01

Background Tooth root problems and periodontal diseases are common in South American camelids (SAC). The objective was to evaluate and optimize the imaging technique for dental radiography in SAC and to describe the radiographic and computed tomographic (CT) anatomy of normal teeth at different ages. In this study, the heads of 20 healthy SAC slaughtered for meat production or euthanized for reasons not related to dental problems included 7 female and 10 male llamas and 3 male alpacas. Using a standardized protocol, radiographs and CT scans of the 20 specimen were performed. Results The most useful radiographic projections for mandibular and maxillary cheek teeth evaluation turned out to be lateral30°ventral - laterodorsal and lateral30°dorsal - lateroventral with slight separation of the dental arcades respectively. Digital radiographic and CT appearance of the mandibular and maxillary teeth were described from the beginning of mineralization till maturity. In addition the normal range of the CT radio density of different cheek teeth and different dental tissues were measured. Hounsfield units of different dental tissues of SAC turned out to be similar to equids. Deviation, shortening and partial destruction of the distal tooth root of mandibular 09′s and 10′s and of maxillary 09′s was observed and the existence of a common pulp chamber in younger teeth was revealed. Conclusions The present study provides information about the dental imaging morphology in clinically healthy SAC. This basic information provides fundamental knowledge for evaluating images and planning treatments in clinically affected animals. PMID:24393365

Endodontic management of middle mesial canal of the mandibular molar

PubMed Central

Sundaresh, K J; Srinivasan, Raghu; Mallikarjuna, Rachappa; Rajalbandi, Sandeep

2013-01-01

Thorough knowledge of root canal morphology and unusual anatomy of the tooth is critical for successful endodontic treatment. Although the most common configuration is two roots and three root canals, mandibular molars might have many different combinations. In the literature, it is less described about three mesial canals and two distal canals in mandibular second molars, indicating a rare anatomical configuration. A case of unusual root canal morphology is presented to demonstrate anatomical variations in mandibular molars. Endodontic therapy was performed in a mandibular second molar with five separate canals, three mesial and two distal. This report points out the importance of looking for additional canals and unusual canal morphology, because knowledge of their existence might occasionally enable clinicians to treat a case successfully that otherwise might have ended in failure. In conclusion, every attempt should be made to find and treat all root canals of a tooth. PMID:23349182

An unusual case of osteonecrosis of the jaw associated with dengue fever and periodontitis.

PubMed

Indurkar, M S; Sethi, R

2016-03-01

Osteonecrosis is a disorder rarely occurring in the jaw. Dengue fever is a common mosquito-borne disease prevalent in many countries including India. The following report presents an interesting case of maxillary osteonecrosis in a middle aged male with a history of dengue infection. We also diagnosed symptoms of chronic periodontitis, which may have potentiated the necrosis. This case report will describe a novel clinical presentation and management of osteonecrosis of the jaw (ONJ) of unknown origin and a possible pathogenesis explaining the association of ONJ with dengue fever and periodontitis. © 2015 Australian Dental Association.

Paramolar – A supernumerary molar: A case report and an overview

PubMed Central

Nayak, Gurudutt; Shetty, Shashit; Singh, Inderpreet; Pitalia, Deepti

2012-01-01

Paramolar is a supernumerary molar usually small and rudimentary, most commonly situated buccally or palatally to one of the maxillary molars. Paramolar is a developmental anomaly and has been argued to arise from a combination of genetic and environmental factors. Reports of this entity are rarely found in the dental literature. This article presents a case report of an unusual occurrence of a paramolar in the maxilla in otherwise a healthy individual. In addition, literature review, prevalence, classification, etiology, complications, diagnosis, and therapeutic strategies that may be adopted when supernumeraries occurs have been discussed. PMID:23559961

The Endocranial Anatomy of Therizinosauria and Its Implications for Sensory and Cognitive Function

PubMed Central

Lautenschlager, Stephan; Rayfield, Emily J.; Altangerel, Perle; Zanno, Lindsay E.; Witmer, Lawrence M.

2012-01-01

Background Therizinosauria is one of the most enigmatic and peculiar clades among theropod dinosaurs, exhibiting an unusual suite of characters, such as lanceolate teeth, a rostral rhamphotheca, long manual claws, and a wide, opisthopubic pelvis. This specialized anatomy has been associated with a shift in dietary preferences and an adaptation to herbivory. Despite a large number of discoveries in recent years, the fossil record for Therizinosauria is still relatively poor, and cranial remains are particularly rare. Methodology/Principal Findings Based on computed tomographic (CT) scanning of the nearly complete and articulated skull of Erlikosaurus andrewsi, as well as partial braincases of two other therizinosaurian taxa, the endocranial anatomy is reconstructed and described. The wider phylogenetic range of the described specimens permits the evaluation of sensory and cognitive capabilities of Therizinosauria in an evolutionary context. The endocranial anatomy reveals a mosaic of plesiomorphic and derived characters in therizinosaurians. The anatomy of the olfactory apparatus and the endosseous labyrinth suggests that olfaction, hearing, and equilibrium were well-developed in therizinosaurians and might have affected or benefited from an enlarged telencephalon. Conclusion/Significance This study presents the first appraisal of the evolution of endocranial anatomy and sensory adaptations in Therizinosauria. Despite their phylogenetically basal position among maniraptoran dinosaurs, therizinosaurians had developed the neural pathways for a well developed sensory repertoire. In particular olfaction and hearing may have played an important role in foraging, predator evasion, and/or social complexity. PMID:23284972

The Tribolium castaneum Ortholog of Sex combs reduced Controls Dorsal Ridge Development

PubMed Central

Shippy, Teresa D.; Rogers, Carmelle D.; Beeman, Richard W.; Brown, Susan J.; Denell, Robin E.

2006-01-01

In insects, the boundary between the embryonic head and thorax is formed by the dorsal ridge, a fused structure composed of portions of the maxillary and labial segments. However, the mechanisms that promote development of this unusual structure remain a mystery. In Drosophila, mutations in the Hox genes Sex combs reduced and Deformed have been reported to cause abnormal dorsal ridge formation, but the significance of these abnormalities is not clear. We have identified three mutant allele classes of Cephalothorax, the Tribolium castaneum (red flour beetle) ortholog of Sex combs reduced, each of which has a different effect on dorsal ridge development. By using Engrailed expression to monitor dorsal ridge development in these mutants, we demonstrate that Cephalothorax promotes the fusion and subsequent dorsolateral extension of the maxillary and labial Engrailed stripes (posterior compartments) during dorsal ridge formation. Molecular and genetic analysis of these alleles indicates that the N terminus of Cephalothorax is important for the fusion step, but is dispensable for Engrailed stripe extension. Thus, we find that specific regions of Cephalothorax are required for discrete steps in dorsal ridge formation. PMID:16849608

Henry Gray, plagiarist.

PubMed

Richardson, Ruth

2016-03-01

The first edition of Anatomy Descriptive and Surgical (1858) was greeted with accolades, but also provoked serious controversy concerning Henry Gray's failure to acknowledge the work of earlier anatomists. A review in the Medical Times (1859) accused Gray of intellectual theft. The journal took the unusual step of substantiating its indictment by publishing twenty parallel texts from Gray and from a pre-existing textbook, Quain's Anatomy. At the recent "Vesalius Continuum" conference in Zakynthos, Greece (2014) Professor Brion Benninger disputed the theft by announcing from the floor the results of a computer analysis of both texts, which he reported exonerated Gray by revealing no evidence of plagiarism. The analysis has not been forthcoming, however, despite requests. Here the historian of Gray's Anatomy supplements the argument set out in the Medical Times 150 years ago with data suggesting unwelcome personality traits in Henry Gray, and demonstrating the utility of others' work to his professional advancement. Fair dealing in the world of anatomy and indeed the genuineness of the lustre of medical fame are important matters, but whether quantitative evidence has anything to add to the discussion concerning Gray's probity can be assessed only if Benninger makes public his computer analysis. © 2015 Wiley Periodicals, Inc.

Variant Anatomy of the Hepatic Vasculature: Importance in Hepatobiliary Resections

PubMed Central

Tigga, Sarika Rachel; Budhiraja, Virendra; Rastogi, Rakhi

2017-01-01

A variant anatomy of the hepatic vasculature has a clinically significant role in hepatobiliary transplantation, resection, tumour embolisation as well as in extrahepatic abdominal surgeries involving the stomach, pancreas or gall bladder. During routine cadaveric dissection, we observed a case of unusually small calibre hepatic artery proper. An accessory hepatic artery was seen emerging from the superior mesenteric artery to the right hepatic lobe along with an accessory hepatic vein from the right hepatic lobe that drained directly into the inferior vena cava. Such accessory hepatic vessels complicate and necessitate an alteration of surgical methodology during resection of hepatic lobes. Preoperative knowledge of variant hepatic vasculature is crucial for minimising the iatrogenic injury and facilitating successful abdominal surgeries. PMID:28764144

The sinonasal communication in the horse: examinations using computerized three-dimensional reformatted renderings of computed-tomography datasets

PubMed Central

2014-01-01

Background Sinusitis is a common disease in the horse. In human medicine it is described, that obstruction of the sinonasal communication plays a major role in the development of sinusitis. To get spatial sense of the equine specific communication ways between the nasal cavity and the paranasal sinuses, heads of 19 horses, aged 2 to 26 years, were analyzed using three-dimensional (3D) reformatted renderings of CT-datasets. Three-dimensional models were generated following manual and semi-automated segmentation. Before segmentation, the two-dimensional (2D) CT-images were verified against corresponding frozen sections of cadaveric heads. Results Three-dimensional analysis of the paranasal sinuses showed the bilateral existence of seven sinus compartments: rostral maxillary sinus, ventral conchal sinus, caudal maxillary sinus, dorsal conchal sinus, frontal sinus, sphenopalatine sinus and middle conchal sinus. The maxillary septum divides these seven compartments into two sinus systems: a rostral paranasal sinus system composed of the rostral maxillary sinus and the ventral conchal sinus and a caudal paranasal sinus system which comprises all other sinuses. The generated 3D models revealed a typically configuration of the sinonasal communication ways. The sinonasal communication started within the middle nasal meatus at the nasomaxillary aperture (Apertura nasomaxillaris), which opens in a common sinonasal channel (Canalis sinunasalis communis). This common sinonasal channel ramifies into a rostral sinonasal channel (Canalis sinunasalis rostralis) and a caudo-lateral sinonasal channel (Canalis sinunasalis caudalis). The rostral sinonasal channel ventilated the rostral paranasal sinus system, the caudo-lateral sinonasal channel opened into the caudal paranasal sinus system. The rostral sinonasal channel was connected to the rostral paranasal sinuses in various ways. Whereas, the caudal channel showed less anatomical variations and was in all cases connected to the caudal maxillary sinus. Volumetric measurements of the sinonasal channels showed no statistically significant differences (P <0.05) between the right and left side of the head. Conclusions Under physiologic conditions both paranasal sinus systems are connected to the nasal cavity by equine specific sinonasal channels. To resolve sinus disease it is aimed to maintain or even reconstruct the normal anatomy of the sinonasal communication by surgical intervention. Therefore, the presented 3D analyses may provide a useful basis. PMID:24646003

Abnormal pelvic morphology and high cervical length are responsible for high-risk pregnancies in women displaying achondroplasia.

PubMed

Vivanti, Alexandre J; Cordier, Anne-Gael; Baujat, Geneviève; Benachi, Alexandra

2016-12-05

Pregnancies of women displaying achondroplasia are at high risk of adverse events. Early sonographic assessment of affected women can indicate an unusually long cervical length. It is the consequence of pathological anatomy of the pelvis. Thus, there is a foreseeable dystocia owing to cephalopelvic disproportion. Furthermore, this situation could also complicate cervical ripening prior to fetal extraction.

Assessment of Thiel-Embalmed Cadavers as a Teaching Tool for Oral Anatomy and Local Anesthesia.

PubMed

Lone, Mutahira; McKenna, Joseph P; Balta, Joy Y; O'Mahony, Siobhain M; Cryan, John F; Downer, Eric J; Toulouse, André

2017-04-01

The aim of this study was to determine whether Thiel-embalmed cadavers would provide a useful anatomy teaching tool for topics that cannot be approached using formalin-fixed cadavers such as oral cavity examination and maxillary anesthesia. The suitability of Thiel-embalmed bodies for performing oral examinations was assessed by asking first-year dental and dental hygiene students at a dental school in Ireland to identify oral structures on a classmate and on a Thiel-embalmed body. The study was conducted in 2016. The ease of location was compared in the two settings, and their quality was assessed on the cadavers. The suitability of Thiel-embalmed cadavers to teach maxillary anesthesia was assessed by students' performing mock injections at five adjacent sites daily for five consecutive days, followed by inspection of the gingival surface by experienced anatomists and dentists. Data were obtained from 57 students, but only the 54 forms that were fully completed were analyzed, for an overall response rate of 85.7%. The results showed that most oral structures were more difficult to locate on cadavers. The texture and appearance of features in the cadavers were rated at a midpoint between realistic and unrealistic. The relative inexperience of the participants, the accumulation of fixative in the oral cavity, and discoloration were mentioned as potential confounding factors. Visual analysis of images obtained following repeated injections revealed no deterioration of the tissue. Importantly, the puncture marks appeared to reduce over time, suggesting that the gingival tissue maintains some elasticity following Thiel fixation. These findings suggest that Thiel-embalmed cadavers may be a useful tool to provide students more time to localize and study aspects of the oral cavity. Likewise, the recoiling capacity of gingival tissue suggests that Thiel-embalmed cadavers may provide an ideal tool for teaching injection technique of local anesthetics.

Climatic effects on the nasal complex: a CT imaging, comparative anatomical, and morphometric investigation of Macaca mulatta and Macaca fascicularis.

PubMed

Márquez, Samuel; Laitman, Jeffrey T

2008-11-01

Previous studies exploring the effects of climate on the nasal region have largely focused on external craniofacial linear parameters, using dry crania of modern human populations. This investigation augments traditional craniofacial morphometrics with internal linear and volumetric measures of the anatomic units comprising the nasal complex (i.e., internal nasal cavity depth, maxillary sinus volumes). The study focuses on macaques (i.e., Macaca mulatta and Macaca fascicularis) living at high and low altitudes, rather than on humans, since the short residency of migratory human populations may preclude using them as reliable models to test the long-term relationship of climate to nasal morphology. It is hypothesized that there will be significant differences in nasal complex morphology among macaques inhabiting different climates. This study integrated three different approaches: CT imaging, comparative anatomy, and morphometrics-in an effort to better understand the morphological structure and adaptive nature of the nasal complex. Results showed statistically significant differences when subsets of splanchnocranial and neurocranial variables were regressed against total maxillary sinus volume for particular taxa. For example, basion-hormion was significant for M. fascicularis, whereas choanal dimensions were significant only for M. mulatta. Both taxa revealed strong correlation between sinus volume and prosthion to staphylion distance, which essentially represents the length of the nasal cavity floor-and is by extension an indicator of the air conditioning capacity of the nasal region. These results clearly show that climatic effects play a major role in shaping the anatomy of the nasal complex in closely related species. The major influence upon these differing structures appears to be related to respiratory-related adaptations subserving differing climatic factors. In addition, the interdependence of the paranasal sinuses with other parts of the complex strongly indicates a functional role for them in nasal complex/upper respiratory functions. Copyright 2008 Wiley-Liss, Inc.

Minimally Invasive Exposure of the Maxillary Artery at the Anteromedial Infratemporal Fossa.

PubMed

Rodriguez Rubio, Roberto; Kola, Olivia; Tayebi Meybodi, Ali; Tabani, Halima; Feng, Xuequan; Burkhardt, Jan-Karl; Yousef, Sonia; Lawton, Michael T; Benet, Arnau

2018-04-12

The maxillary artery (MA) has been described as a reliable donor for extracranial-intracranial high-flow bypass. Existing techniques to harvest MA require brain retraction and drilling of the middle fossa (with or without a zygomatic osteotomy), carrying the potential risks of venous bleeding, injury to the branches of the maxillary or mandibular nerves, muscular transection, or temporomandibular junction disorders. To describe a novel technique to expose the MA without bony drilling and with minimal impact to surrounding structures. A conventional curvilinear incision was performed in 10 cadaveric specimens, prior to elevating the scalp to expose the zygomatic root and lateral orbital rim. The sphenozygomatic suture was followed to the anterolateral edge of the inferior orbital fissure (IOF) to locate and harvest the pterygoid segment of the MA. Topographic anatomy was assessed using surrounding landmarks and 3D Cartesian coordinates to define the surgical area. The number of visible MA branches and their lengths were recorded. The MA was successfully exposed in all specimens. This approach allowed 6 branches of MA to be exposed. The average length of exposure was 23.3 ± 8.3 mm and the average surgical area was 2.8 ± 0.9 cm2. The IOF was 11.5 ± 4.2 mm from the MA. Our technique provides landmarks to identify the distal pterygoid segment of MA as a donor for extracranial-intracranial bypasses without the need for additional craniectomies. Clear anatomical landmarks, including the sphenozygomatic suture, anterolateral edge of IOF, infraorbital artery, and the pterygomaxillary fissure defined a trajectory to efficiently localize the MA with minimal risk to surrounding structures.

IMRT vs. 3D Noncoplanar Treatment Plans for Maxillary Sinus Tumors: A New Tool for Quantitative Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levin, Daphne; Menhel, Janna; Alezra, Dror

2008-01-01

We compared 9-field, equispaced intensity modulated radiation therapy (IMRT), 4- to 5-field, directionally optimized IMRT, and 3-dimensional (3D) noncoplanar planning approaches for tumors of the maxillary sinus. Ten patients were planned retrospectively to compare the different treatment techniques. Prescription doses were 60 to 70 Gy. Critical structures contoured included optic nerves and chiasm, lacrimal glands, lenses, and retinas. As an aid for plan assessment, we introduced a new tool: Critical Organ Scoring Index (COSI), which allows quantitative evaluation of the tradeoffs between target coverage and critical organ sparing. This index was compared with other, commonly used conformity indices. For amore » reliable assessment of both tumor coverage and dose to critical organs in the different planning techniques, we introduced a 2D, graphical representation of COSI vs. conformity index (CI). Dose-volume histograms and mean, maximum, and minimum organ doses were also compared. IMRT plans delivered lower doses to ipsilateral structures, but were unable to spare them. 3D plans delivered less dose to contralateral structures, and were more homogeneous, as well. Both IMRT approaches gave similar results. In cases where choice of optimal plan was difficult, the novel 2D COSI-CI representation gave an accurate picture of the tradeoffs between target coverage and organ sparing, even in cases where other conformity indices failed. Due to their unique anatomy, maxillary sinus tumors may benefit more from a noncoplanar approach than from IMRT. The new graphical representation proposed is a quick, visual, reliable tool, which may facilitate the physician's choice of best treatment plan for a given patient.« less

Comparative anatomy of the cheek muscles within the Centromochlinae subfamily (Ostariophysi, Siluriformes, Auchenipteridae).

PubMed

Sarmento-Soares, Luisa Maria; Porto, Marcovan

2006-02-01

Glanidium melanopterum Miranda Ribeiro, a typical representative of the subfamily Centromochlinae (Siluriformes: Auchenipteridae), is herein described myologically and compared to other representative species within the group, Glanidium ribeiroi, G. leopardum, Tatia neivai, T. intermedia, T. creutzbergi, Centromochlus heckelii, and C. existimatus. The structure of seven pairs of striated cephalic muscles was compared anatomically: adductor mandibulae, levator arcus palatini, dilatator operculi, adductor arcus palatini, extensor tentaculi, retractor tentaculi, and levator operculi. We observed broad adductor mandibulae muscles in both Glanidium and Tatia, catfishes with depressed heads and smaller eyes. Similarities between muscles were observed: the presence of a large aponeurotic insertion for the levator arcus palatini muscle; an adductor arcus palatini muscle whose origin spread over the orbitosphenoid, pterosphenoid, and parasphenoid; and the extensor tentaculi muscle broadly attached to the autopalatine. There is no retractor tentaculi muscle in either the Glanidium or Tatia species. On the other hand, in Centromochlus, with forms having large eyes and the tallest head, the adductor mandibulae muscles are slim; there is a thin aponeurotic or muscular insertion for the levator arcus palatini muscle; the adductor arcus palatini muscle originates from a single osseous process, forming a keel on the parasphenoid; the extensor tentaculi muscle is loosely attached to the autopalatine, permitting exclusive rotating and sliding movements between this bone and the maxillary. The retractor tentaculi muscle is connected to the maxilla through a single tendon, so that both extensor and retractor tentaculi muscles contribute to a wide array of movements of the maxillary barbels. A discussion on the differences in autopalatine-maxillary movements among the analyzed groups is given. (c) 2005 Wiley-Liss, Inc.

Anatomy adventure: a board game for enhancing understanding of anatomy.

PubMed

Anyanwu, Emeka G

2014-01-01

Certain negative factors such as fear, loss of concentration and interest in the course, lack of confidence, and undue stress have been associated with the study of anatomy. These are factors most often provoked by the unusually large curriculum, nature of the course, and the psychosocial impact of dissection. As a palliative measure, Anatomy Adventure, a board game on anatomy was designed to reduce some of these pressures, emphasize student centered and collaborative learning styles, and add fun to the process of learning while promoting understanding and retention of the subject. To assess these objectives, 95 out of over 150 medical and dental students who expressed willingness to be part of the study were recruited and divided into a Game group and a Non-game group. A pretest written examination was given to both groups, participants in the Game group were allowed to play the game for ten days, after which a post-test examination was also given. A 20-item questionnaire rated on a three-point scale to access student's perception of the game was given to the game group. The post-test scores of the game group were significantly higher (P < 0.05) than those of the non-game counterparts. Also the post-test score of the game based group was significantly better (P < 0.05) than their pretest. The students in their feedback noted in very high proportions that the game was interesting, highly informative, encouraged team work, improved their attitude, and perception to gross anatomy. © 2013 American Association of Anatomists.

A Coarctation of the Distal Thoracic Aorta with a Supradiaphragmatic Origin of the Celiacomesenteric Trunk: An Anatomic and Etiologic Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Youkyung; Lee, Whal, E-mail: leew@radiol.snu.ac.kr; Park, Jae Hyung

Stenosis of the distal thoracic aorta was found during an evaluation for incidentally detected hypertension in a 21-year-old male patient. A celiacomesenteric trunk originated from just above the coarctation site in the thorax, and the lower posterior intercostal arteries showed unusual low origins. Consideration of these anatomies suggests that the etiology of this case is congenital.

Micrandra inundata (Euphorbiaceae), a new species with unusual wood anatomy from black-water river banks in southern Venezuela

Treesearch

Paul E. Berry; Alex C. Wiedenhoeft

2004-01-01

Micrandra inundata is a distinctive new species adapted to seasonally flooded black-water river banks in southern Venezuela. Trees rarely exceed 10 m in height but have thick basal trunks composed of very lightweight wood. It has the smallest leaves and fruits of any known Micrandra species and appears to be most closely related to M. minor Benth. The botanical...

Guinea pig and chinchilla care and husbandry.

PubMed

Donnelly, Thomas M; Brown, Cynthia J

2004-05-01

This article reviews breeds and coat colors of guinea pigs and chinchillas, their husbandry, care and anatomy. The unusual reproductive physiology and reproductive diseases of these animals are described. We cover nutrition, the potential for disease on poor diets, and the vocalization of hystricomorph rodents. Skills such as handling, sexing, blood collection and drug administration, including antibiotic toxicity are described. The conclusion lists recommended textbooks, pet owner manuals, and websites.

Liver segment IV hypoplasia as a risk factor for bile duct injury.

PubMed

Mercado, Miguel Angel; Franssen, Bernardo; Arriola, Juan Carlos; Garcia-Badiola, Artemio; Arámburo, Rigoberto; Elnecavé, Alejandro; Cortés-González, Rubén

2011-09-01

Bile duct injury remains constant in the era of laparoscopic cholecystectomy and misidentification of structures remains one of the most common causes of such injuries. Abnormalities in liver segment IV, which is fully visible during laparoscopic cholecystectomy, may contribute to misidentification as proposed herein. We describe the case of a 36-year-old female who had a bile duct injury during a laparoscopic cholecystectomy where the surgeon noticed an unusually small distance between the gallbladder and the round ligament. We define hypoplasia of liver segment IV as well as describe the variation of the biliary anatomy in the case. We also intend to fit it in a broader spectrum of developmental anomalies that have both hyopoplasia of some portion of the liver and variations in gallbladder and bile duct anatomy that may contribute to bile duct injury. To our knowledge, hypoplasia of liver segment IV has not been suggested in the literature as a risk factor for bile duct injury except in the extreme case of a left-sided gallbladder. Surgeons should be vigilant during laparoscopic cholecystectomy when they become aware of an unusually small distance between the gallbladder bed and the round ligament prior to beginning their dissection, variations in the common bile duct and cystic duct should be expected.

Facial duplication: case, review, and embryogenesis.

PubMed

Barr, M

1982-04-01

The craniofacial anatomy of an infant with facial duplication is described. There were four eyes, two noses, two maxillae, and one mandible. Anterior to the single pituitary the brain was duplicated and there was bilateral arhinencephaly. Portions of the brain were extruded into a large frontal encephalocele. Cases of symmetrical facial duplication reported in the literature range from two complete faces on a single head (diprosopus) to simple nasal duplication. The variety of patterns of duplication suggests that the doubling of facial components arises in several different ways: Forking of the notochord, duplication of the prosencephalon, duplication of the olfactory placodes, and duplication of maxillary and/or mandibular growth centers around the margins of the stomatodeal plate. Among reported cases, the female:male ratio is 2:1.

Functional anatomy of the temporo-mandibular joint (II).

PubMed

Sava, Anca; Scutariu, Monica

2012-01-01

Jaw movement is analyzed as an action between two rigid components jointed together in a particular way, the movable mandible against the stabilized cranium. Opening and closing movements are symmetrical; that is, both sides of the cranio-mandibular articulation are making the same movements. Protrusive and retrusive movements may also be symmetrical. The mandibular muscles determine all the complicated postures and-movements of the jaw. Their behavior can be greatly clarified by restating certain fundamentals crucial to purposive muscular activity. The joint derives its arterial supply from the superficial temporal artery and the maxillary artery. Branches of the auriculo-temporal and masseteric nerves and postganglionic sympathetic nerves supply the tissues associated with the capsular ligament and the looser posterior bilaminar extension of the disc.

A computed tomography study in the location of greater palatine artery in South Indian population for maxillary osteotomy

PubMed Central

Packiaraj, I.; Retnakumar, K.; Anusuya, G. Sai; Rajambigai, M. Aarti; Baskaran, M.; Devadoss, Vimal Joseph

2016-01-01

Introduction: The greater palatine artery is one of the important feeding vessel to the maxilla. The surgeon should know the surgical anatomy of greater palatine artery to avoid trauma in maxilla which leads to ischemic problems. Aim: The CT evaluation of the distance between Pyriform aperture and the greater palatine foramen in various ages of both sexes. Result: The distance varies according to sex and age which are measured by CT and standardised. Discussion: The lateral nasal osteotomy can be done upto 25 mm depth, instead of 20 mm. Conclusion: By this study it shows that the lateral nasal wall osteotomy can be performed without injury to greater palatine artery. PMID:27829768

Influence of the site of origin on the outcome of squamous cell carcinoma of the maxilla-oral versus sinus.

PubMed

Bobinskas, A M; Wiesenfeld, D; Chandu, A

2014-02-01

The maxilla may be affected by squamous cell carcinoma (SCC) from both oral and sinus sites. We sought to determine whether the site of origin of the maxillary tumour, oral as compared to sinus, influences survival. Univariate Kaplan-Meier and multivariate Cox proportional hazard models analysis of 58 patients with SCC involving the maxilla, treated with curative intent, was conducted. The overall 5-year disease-free survival for the group was 41.7%. Five-year disease-free survival for oral subsite SCC was 56.8%, while for sinus subsite was only 21.6%. Univariate analysis found SCC of sinus origin to be associated with a poorer prognosis, however this was not confirmed on multivariate analysis. T-stage and positive margins were found to be the only independent risk factors. For SCC of the maxilla, sinus origin of the tumour per se does not confer a poorer prognosis; however, as a result of the complex anatomy of the midface, these tumours can present at an advanced stage, while surgical control of the disease can be more difficult, especially posteriorly. Tumour size and positive margins were the determinants of a poor prognosis in this group of patients with maxillary SCC. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Comparison of micro-computerized tomography and cone-beam computerized tomography in the detection of accessory canals in primary molars.

PubMed

Acar, Buket; Kamburoğlu, Kıvanç; Tatar, İlkan; Arıkan, Volkan; Çelik, Hakan Hamdi; Yüksel, Selcen; Özen, Tuncer

2015-12-01

This study was performed to compare the accuracy of micro-computed tomography (CT) and cone-beam computed tomography (CBCT) in detecting accessory canals in primary molars. Forty-one extracted human primary first and second molars were embedded in wax blocks and scanned using micro-CT and CBCT. After the images were taken, the samples were processed using a clearing technique and examined under a stereomicroscope in order to establish the gold standard for this study. The specimens were classified into three groups: maxillary molars, mandibular molars with three canals, and mandibular molars with four canals. Differences between the gold standard and the observations made using the imaging methods were calculated using Spearman's rho correlation coefficient test. The presence of accessory canals in micro-CT images of maxillary and mandibular root canals showed a statistically significant correlation with the stereomicroscopic images used as a gold standard. No statistically significant correlation was found between the CBCT findings and the stereomicroscopic images. Although micro-CT is not suitable for clinical use, it provides more detailed information about minor anatomical structures. However, CBCT is convenient for clinical use but may not be capable of adequately analyzing the internal anatomy of primary teeth.

Soft tissue fibrosarcoma of pre maxillary region in an adult: report of a unique pathological entity

PubMed Central

Naik, Smitha K.; Astekar, Madhusudhan; Rao, Dinesh

2012-01-01

Fibrosarcoma of the oral and maxillofacial region is a rare entity with poor prognosis. Most common sites are the extremities, with only one percent of fibrosarcoma arising in the head and neck area. Oral fibrosarcoma are locally infiltrative and destructive, spreads by haematogenous dissemination. The positive immunostaining for vimentin, together with negativity for muscular immunomarkers help to diagnosis the fibrosarcoma. Surgical management of fibrosarcoma in maxillofacial region is far from satisfactory, because of lack of inadequate clearance. This paper describes an unusual case of soft tissue fibrosarcoma of premaxillary region in an adult aged 71 years. PMID:24765457

Multidisciplinary Management of An Unusual Isolated Alveolar Bone Infection- A Rare Case Report

PubMed Central

B, Dixit Mala; S, Kulkarni Rahul; M, Ramugade Manoj

2015-01-01

Restoration of proximal defect of tooth is of paramount importance as its improper restoration usually results in fracture of the restoration or deteriorated periodontal health. The article reports a case with a discreet mass of alveolar bone necrosis closed to the overhanged amalgam restoration in the proximal box of the maxillary molar. As a result of this improper proximal restoration it led to deep periodontal pocket and subsequent alveolar bone necrosis which was managed successfully with combined Endodontic-Periodontic treatment. This article highlights the unfortunate sequelae of bone necrosis as a consequence of an incorrect or overlooked dental treatment and its comprehensive management. PMID:26155587

Alternative technique in atypical spinal decompression: the use of the ultrasonic scalpel in paediatric achondroplasia

PubMed Central

Woodacre, Timothy; Sewell, Matthew; Clarke, Andrew J; Hutton, Mike

2016-01-01

Spinal stenosis can be a very disabling condition. Surgical decompression carries a risk of dural tear and neural injury, which is increased in patients with severe stenosis or an atypical anatomy. We present an unusual case of symptomatic stenosis secondary to achondroplasia presenting in a paediatric patient, and highlight a new surgical technique used to minimise the risk of dural and neural injury during decompression. PMID:27288205

The broad ligament: a review of its anatomy and development in different species and hormonal environments.

PubMed

Miller, Anne; Hong, Matthew K-H; Hutson, John M

2004-04-01

The broad ligament is a double fold of peritoneum forming a mesentery for the human female genital tract. We investigated the anatomy of the broad ligament in different species and its hormonal regulation to determine if it had a role in gonadal positioning. The medical and veterinary literature was reviewed for descriptions of broad ligament anatomy and development. In addition, four adult female rats were dissected to compare the macroscopic anatomy of the broad ligament with any homologous structures in the male (n = 2). Detailed review was made of human males with persistent Müllerian duct syndrome (PMDS) and of bovine freemartin calves to determine the effect of abnormal hormonal environments on broad ligament development. Human and veterinary texts show variable broad ligament development between species, most being consistent with the size and shape of the uterus and uterine tubes. The broad ligament in adult female rats is a simple peritoneal fold and is homologous with the mesentery of the testis and vas deferens in males. Patients with PMDS and bovine freemartins have a broad ligament with intermediate anatomy. In PMDS the broad ligament is elongated and narrow, and not attached to the pelvic wall. The broad ligament is the mesentery of the genital ducts, and its anatomy varies with the degree of Müllerian duct fusion. The absence of a human male homologue is unusual, as the genital mesentery persists in male rodents. Apparent lack of a male homologue in the human may relate to obliteration of the processus vaginalis. The variable development of the broad ligament in pathological conditions is consistent with a role for steroid hormones in its development. Copyright 2004 Wiley-Liss, Inc.

Determining the anatomy of the descending palatine artery and pterygoid plates with computed tomography in Class III patients.

PubMed

Ueki, Koichiro; Hashiba, Yukari; Marukawa, Kohei; Nakagawa, Kiyomasa; Okabe, Katsuhiko; Yamamoto, Etsuhide

2009-12-01

Understanding the anatomy of the pterygomaxillary junction region helps prevent blood loss in Le Fort I osteotomy. Here, we determined the location of the descending palatine artery and the structure of the pterygomaxillary region. The study group consisted of 82 Japanese patients with mandibular prognathism and asymmetry, with and without maxillary retrognathism or asymmetry. A total of 164 sides were measured and divided into right versus left, men versus women, and bimaxillary osteotomy (B) versus mandibular osteotomy (S). Lateral and frontal cephalograms and computed tomography (CT) were analysed for all patients. The relationship between the cephalometric measurements and the measurements of the descending palatine artery and pterygoid plate (PP) were assessed. There were no significant correlations between measurements of cephalograms and those of the descending palatine artery and PPs. There were significant differences between right and left in lateral plate length (p=0.0014) and thickness of PP (p=0.0047). There were significant differences between men and women in right width of PP (p=0.0034), right thickness of PP (p=0.0063), left posterior length (p=0.0196), and left thickness of PP (p=0.0279). The B group had a shorter anterior length than the S group (right: p<0.0001, left: p=0.0027). These results suggest that the location of the descending palatine artery and the morphology of the PPs were not significantly associated with any cephalometric measurements. CT examination is necessary to recognize the anatomy of pterygomaxillary region and the exact positions of descending palatine artery before Le Fort I osteotomy.

[Principles of traditional Chinese medicine].

PubMed

Meng, A

2000-01-01

The beginnings of traditional Chinese medicine (TCM) can be related to the three most important philosophic and religious personalities. Modern Western medicine (MM), which was already sensationally successful at that time, was brought to China by business men, missionaries and soldiers. Compared to MM, the theories of TCM seem abstract, its concept unusual. Historical hallmarks of TCM influenced by culture are the following: the medical system is philosophical, oriented towards humanism. TCM is a medical system without strict structural relationships (without anatomy).

Isolated scaphoid dislocation associated with axial carpal dissociation: an unusual injury report.

PubMed

Horton, Todd; Shin, Alexander Y; Cooney, William P

2004-11-01

We present a report of a patient with an isolated scaphoid dislocation associated with a hyperextension and axial loading injury of the carpus required a careful and extensive clinical and radiographic evaluation leading to surgical intervention to reduce and stabilize the scaphoid and to reduce and hold internally the axial carpal injury. Knowledge of the anatomy and the potential injury patterns of the carpus will aid the hand surgeon with injury recognition and proper treatment.

Ultrasound and MRI of Pediatric Ocular Masses with Histopathologic Correlation

PubMed Central

Brennan, Rachel C.; Wilson, Matthew W.; Kaste, Sue; Helton, Kathleen J.; McCarville, M. Beth

2012-01-01

We review our experience with unusual ocular pathologies mimicking retinoblastoma that were referred to our institution over the past two decades. After presenting the imaging anatomy of the normal eye, we discuss pertinent clinical and pathological features, and illustrate the ultrasound and magnetic resonance imaging appearance of retinoblastoma, medulloepithelioma, uveal melanoma, persistent fetal vasculature, Coats disease, corneal dermoid, retinal dysplasia and toxocara granuloma. Features useful in discriminating between these entities are emphasized. PMID:22466750

Unusual Case of Calculus in Floor of Mouth: A Case Report

PubMed Central

Thosar, Nilima; Jain, Eesha S

2012-01-01

Abstract Calculus consists of mineralized bacterial plaque that forms on the surfaces of natural teeth. It is supragingival or subgingival depending upon its relation with gingival margin. The two most common locations for supragingival calculus are the buccal surfaces of maxillary molars and lingual surfaces of mandibular anterior teeth. It is very important to rule out the predisposing factor for calculus formation. In the present case of an 11-year- old female child, 1.2 × 1.5 cm large indurated mass suggestive of calculus in the left side of floor of mouth was observed. After surgical removal, along with indurated mass, an embedded root fragment was seen. Biochemical analysis of the specimen detected the calcium and phosphate ions approximately equals to the level in calculus. Thus, we diagnosed it as a calculus. Oral hygiene instructions and regular follow-up was advised. How to cite this article: Bahadure RN, Thosar N, Jain ES. Unusual Case of Calculus in Floor of Mouth: A Case Report. Int J Clin Pediatr Dent 2012;5(3):223-225. PMID:25206174

Anatomical knowledge among medieval folk artists: osteological interpretation of two Dance of Death motifs.

PubMed

Petaros, Anja; Culina, Tatjana; Suran, Andrea; Skrobonja, Ante

2013-08-01

Anatomy has a long history that started with dissection of animals and then expanded and flourished thanks to dissections performed on human bodies. Artists had a crucial role in uncovering the secrets of human anatomy. While most studies have focused on the influence of famous Renaissance artists on human anatomy studies, the anatomical drawings by pre-Renaissance artists and local craftsmen have remained in their shadow. One of the most popular artistic genres in which complete or parts of human skeletons appear is the Dance of Death (Danse Macabre). This article is an anthropological study of two medieval Dance of Death frescoes that are unusual in being relatively early as well as accurately datable. A comparative morphological analysis of the two late 15th century works present in Istria has been conducted. The two works were painted by two local masters and show how the artists filled the gaps in their knowledge of human anatomy mostly with insights into animal bones and imagination. Their artworks, even though only 16 years apart, demonstrate substantial differences in the representation of the skeletons. The article argues that the history of medicine and of art could make good use of osteology and physical anthropology in attempts to define and understand how anatomical knowledge developed among pre-Renaissance and post-Renaissance artists and local people. © 2013 Anatomical Society.

Anatomical knowledge among medieval folk artists: osteological interpretation of two Dance of Death motifs

PubMed Central

Petaros, Anja; Čulina, Tatjana; Šuran, Andrea; Škrobonja, Ante

2013-01-01

Anatomy has a long history that started with dissection of animals and then expanded and flourished thanks to dissections performed on human bodies. Artists had a crucial role in uncovering the secrets of human anatomy. While most studies have focused on the influence of famous Renaissance artists on human anatomy studies, the anatomical drawings by pre-Renaissance artists and local craftsmen have remained in their shadow. One of the most popular artistic genres in which complete or parts of human skeletons appear is the Dance of Death (Danse Macabre). This article is an anthropological study of two medieval Dance of Death frescoes that are unusual in being relatively early as well as accurately datable. A comparative morphological analysis of the two late 15th century works present in Istria has been conducted. The two works were painted by two local masters and show how the artists filled the gaps in their knowledge of human anatomy mostly with insights into animal bones and imagination. Their artworks, even though only 16 years apart, demonstrate substantial differences in the representation of the skeletons. The article argues that the history of medicine and of art could make good use of osteology and physical anthropology in attempts to define and understand how anatomical knowledge developed among pre-Renaissance and post-Renaissance artists and local people. PMID:23763286

The nasal and paranasal architecture of the Middle Miocene ape Pierolapithecus catalaunicus (primates: Hominidae): phylogenetic implications.

PubMed

Pérez de Los Ríos, Miriam; Moyà-Solà, Salvador; Alba, David M

2012-09-01

The internal (nasal and paranasal) cranial anatomy of the Middle Miocene (11.9 Ma [millions of years ago]) great ape Pierolapithecus catalaunicus (Hominidae: Dryopithecini) is described on the basis of computed-tomography scans of the holotype specimen (IPS21350), with particular emphasis on its phylogenetic implications. Pierolapithecus displays the following characters: an anteriorly-restricted maxillary sinus that posteriorly spreads towards the ethmoidal area (thus resembling the pongine condition), although being situated well above the molar roots (as in kenyapithecins, other dryopithecins and pongines); lack of frontal sinus (a synapomorphy of derived pongines, independently acquired by both cercopithecoids and hylobatids); posteriorly-situated turbinals (as in Pongo); anteriorly-projecting nasolacrimal canal (as in Pongo); and probably stepped nasal floor with non-overlapping premaxillary-maxillary contact (as in dryopithecines and stem hominoids, although it cannot be conclusively shown due to bone damage). Overall, Pierolapithecus displays a mosaic of primitive hominid and derived pongine features that are inconsistent with this taxon being a hominine (as previously suggested). Two alternative phylogenetic interpretations are possible: Pierolapithecus may be a stem member of the Hominidae as previously suggested in its original description, or alternatively this taxon may be a stem member of the Ponginae s.l. (with the European dryopithecines being the sister taxon to the Asian pongines). Copyright © 2012 Elsevier Ltd. All rights reserved.

Gingival abscess due to an unusual nail-biting habit: a case report.

PubMed

Sousa, Denise; Pinto, Daniela; Araujo, Rebecca; Rego, Rodrigo Otavio; Moreira-Neto, Jose

2010-03-01

Nail-biting is one of the most frequent deleterious oral habits in children. It can result in systemic diseases or oral traumatic lesion. This report describes a case of gingival abscess in a child due to a fingernail-biting habit. A 5-year, 6-month-old female presented gingival swelling and fistula in the primary maxillary left central and right lateral incisors as an unusual sequelae to the periodontal tissues from fingernail-biting. A periodontal curette was used to remove the fragments and to curette the area. After the curettage, an exudate of blood and pus was drained. Then the area was irrigated with 0.12% chlorhexidine solution; applying finger pressure controlled the secretion. After one week, the patient returned with gingival swelling present in the same teeth. The same curettage procedure was performed. It was suggested that the deleterious habit was related to emotional tension and anxiety behaviors and the patient was referred for psychological treatment. When the patient returned one month later, she was still biting her fingernails, but she had stopped placing fragments into the gingival crevice. No more gingival inflammation or swelling was observed. his paper presents an unusual case report of a gingival abscess due to a fingernail-biting habit in a child, probably related to an emotional condition. The fingernail-biting habit can induce a periodontal traumatic injury yielding a more serious complication such as a gingival abscess.

Normal Anatomy, Histology, and Spontaneous Pathology of the Nasal Cavity of the Cynomolgus Monkey (Macaca fascicularis).

PubMed

Chamanza, Ronnie; Taylor, Ian; Gregori, Michela; Hill, Colin; Swan, Mark; Goodchild, Joel; Goodchild, Kane; Schofield, Jane; Aldous, Mark; Mowat, Vasanthi

2016-07-01

The evaluation of inhalation studies in monkeys is often hampered by the scarcity of published information on the relevant nasal anatomy and pathology. We examined nasal cavities of 114 control cynomolgus monkeys from 11 inhalation studies evaluated 2008 to 2013, in order to characterize and document the anatomic features and spontaneous pathology. Compared to other laboratory animals, the cynomolgus monkey has a relatively simple nose with 2 unbranched, dorsoventrally stacked turbinates, large maxillary sinuses, and a nasal septum that continues into the nasopharynx. The vomeronasal organ is absent, but nasopalatine ducts are present. Microscopically, the nasal epithelium is thicker than that in rodents, and the respiratory (RE) and transitional epithelium (TE) rest on a thick basal lamina. Generally, squamous epithelia and TE line the vestibule, RE, the main chamber and nasopharynx, olfactory epithelium, a small caudodorsal region, while TE is observed intermittently along the passages. Relatively high incidences of spontaneous pathology findings, some resembling induced lesions, were observed and included inflammation, luminal exudate, scabs, squamous and respiratory metaplasia or hyperplasia, mucous cell hyperplasia/metaplasia, and olfactory degeneration. Regions of epithelial transition were the most affected. This information is considered helpful in the histopathology evaluation and interpretation of inhalation studies in monkeys. © The Author(s) 2016.

Functional anatomy and feeding biomechanics of a giant Upper Jurassic pliosaur (Reptilia: Sauropterygia) from Weymouth Bay, Dorset, UK.

PubMed

Foffa, Davide; Cuff, Andrew R; Sassoon, Judyth; Rayfield, Emily J; Mavrogordato, Mark N; Benton, Michael J

2014-08-01

Pliosaurs were among the largest predators in Mesozoic seas, and yet their functional anatomy and feeding biomechanics are poorly understood. A new, well-preserved pliosaur from the Kimmeridgian of Weymouth Bay (UK) revealed cranial adaptations related to feeding. Digital modelling of computed tomography scans allowed reconstruction of missing, distorted regions of the skull and of the adductor musculature, which indicated high bite forces. Size-corrected beam theory modelling showed that the snout was poorly optimised against bending and torsional stresses compared with other aquatic and terrestrial predators, suggesting that pliosaurs did not twist or shake their prey during feeding and that seizing was better performed with post-symphyseal bites. Finite element analysis identified biting-induced stress patterns in both the rostrum and lower jaws, highlighting weak areas in the rostral maxillary-premaxillary contact and the caudal mandibular symphysis. A comparatively weak skull coupled with musculature that was able to produce high forces, is explained as a trade-off between agility, hydrodynamics and strength. In the Kimmeridgian ecosystem, we conclude that Late Jurassic pliosaurs were generalist predators at the top of the food chain, able to prey on reptiles and fishes up to half their own length. © 2014 Anatomical Society.

Functional anatomy and feeding biomechanics of a giant Upper Jurassic pliosaur (Reptilia: Sauropterygia) from Weymouth Bay, Dorset, UK

PubMed Central

Foffa, Davide; Cuff, Andrew R; Sassoon, Judyth; Rayfield, Emily J; Mavrogordato, Mark N; Benton, Michael J

2014-01-01

Pliosaurs were among the largest predators in Mesozoic seas, and yet their functional anatomy and feeding biomechanics are poorly understood. A new, well-preserved pliosaur from the Kimmeridgian of Weymouth Bay (UK) revealed cranial adaptations related to feeding. Digital modelling of computed tomography scans allowed reconstruction of missing, distorted regions of the skull and of the adductor musculature, which indicated high bite forces. Size-corrected beam theory modelling showed that the snout was poorly optimised against bending and torsional stresses compared with other aquatic and terrestrial predators, suggesting that pliosaurs did not twist or shake their prey during feeding and that seizing was better performed with post-symphyseal bites. Finite element analysis identified biting-induced stress patterns in both the rostrum and lower jaws, highlighting weak areas in the rostral maxillary-premaxillary contact and the caudal mandibular symphysis. A comparatively weak skull coupled with musculature that was able to produce high forces, is explained as a trade-off between agility, hydrodynamics and strength. In the Kimmeridgian ecosystem, we conclude that Late Jurassic pliosaurs were generalist predators at the top of the food chain, able to prey on reptiles and fishes up to half their own length. PMID:24925465

Did pterosaurs feed by skimming? Physical modelling and anatomical evaluation of an unusual feeding method.

PubMed

Humphries, Stuart; Bonser, Richard H C; Witton, Mark P; Martill, David M

2007-08-01

Similarities between the anatomies of living organisms are often used to draw conclusions regarding the ecology and behaviour of extinct animals. Several pterosaur taxa are postulated to have been skim-feeders based largely on supposed convergences of their jaw anatomy with that of the modern skimming bird, Rynchops spp. Using physical and mathematical models of Rynchops bills and pterosaur jaws, we show that skimming is considerably more energetically costly than previously thought for Rynchops and that pterosaurs weighing more than one kilogram would not have been able to skim at all. Furthermore, anatomical comparisons between the highly specialised skull of Rynchops and those of postulated skimming pterosaurs suggest that even smaller forms were poorly adapted for skim-feeding. Our results refute the hypothesis that some pterosaurs commonly used skimming as a foraging method and illustrate the pitfalls involved in extrapolating from limited morphological convergence.

Laparoscopic cholecystectomy for a left-sided gallbladder.

PubMed

Iskandar, Mazen E; Radzio, Agnes; Krikhely, Merab; Leitman, I Michael

2013-09-21

Cholecystectomy is a common procedure. Abnormalities in the anatomy of the biliary system are common but an abnormal location of the gallbladder is much rarer. Despite frequent pre-operative imaging, the aberrant location of the gallbladder is commonly discovered at surgery. This article presents a case of a patient with the gallbladder located to the left of the falciform ligament in the absence of situs inversus totalis that presented with right upper quadrant pain. A laparoscopic cholecystectomy was performed and it was noted that the cystic duct originated from the right side. The presence of a left sided gall bladder is often associated with various biliary, portal venous and other anomalies that might lead to intra-operative injuries. The spectrum of unusual positions and anatomical gallbladder abnormalities is reviewed in order to facilitate elective and emergent cholecystectomy as well as other hepatobiliary procedures. With proper identification of the anatomy, minimally invasive approaches are still considered safe.

Laparoscopic cholecystectomy for a left-sided gallbladder

PubMed Central

Iskandar, Mazen E; Radzio, Agnes; Krikhely, Merab; Leitman, I Michael

2013-01-01

Cholecystectomy is a common procedure. Abnormalities in the anatomy of the biliary system are common but an abnormal location of the gallbladder is much rarer. Despite frequent pre-operative imaging, the aberrant location of the gallbladder is commonly discovered at surgery. This article presents a case of a patient with the gallbladder located to the left of the falciform ligament in the absence of situs inversus totalis that presented with right upper quadrant pain. A laparoscopic cholecystectomy was performed and it was noted that the cystic duct originated from the right side. The presence of a left sided gall bladder is often associated with various biliary, portal venous and other anomalies that might lead to intra-operative injuries. The spectrum of unusual positions and anatomical gallbladder abnormalities is reviewed in order to facilitate elective and emergent cholecystectomy as well as other hepatobiliary procedures. With proper identification of the anatomy, minimally invasive approaches are still considered safe. PMID:24124340

Diagnosis of blunt traumatic aortic injury 2007: still a nemesis.

PubMed

Mirvis, Stuart E; Shanmuganathan, K

2007-10-01

In recent years, the use of multidetector computed tomography (MDCT) for the diagnosis of acute thoracic injury in blunt trauma has expanded. MDCT has shown high accuracy for the diagnosis or exclusion of injury to the aorta and its primary branches, decreasing the need for thoracic angiography and allowing earlier treatment of this often rapidly fatal lesion. With increasing use of MDCT, more subtle injuries and variants of vascular anatomy are being recognized that create pitfalls in the diagnosis. Of perhaps more concern is the recognition that aortic injury can occur with little or no associated mediastinal hematoma, the principle chest radiographic finding indicating a need for further imaging. The importance of recognizing unusual sites of aortic injury, congenital variants of mediastinal anatomy, the precise extent of injury, and the anatomic pathology present as key factors in deciding among treatment options is emphasized.

A silicone rubber mould of the heart.

PubMed

Torrent-Guasp, F F; Whimster, W F; Redmann, K

1997-04-01

The macroscopical structure of the ventricular myocardium has been an unsolved problem since the XVIth century, when Anatomy started as an authentic science. Since then the spatial organization of the myocardial fibres has represented, as Pettigrew says, "an arrangement so unusual and perplexing, that it has long been considered as forming a kind of Gordian knot in Anatomy. Of the complexity of the arrangement I need not speak further than to say that Vesalius, Albinus, Haller and De Blainville, all confessed their-inability to unravel it". What is shown in the present paper is the result of an anatomical work, developed over 43 years, by means of which it has been shown that the ventricular myocardial mass consists of a band, curled in a helical way, which extends from the pulmonary artery to the aorta. This is illustrated by a silicone rubber model cast from an actual unrolled myocardial band.

Did Pterosaurs Feed by Skimming? Physical Modelling and Anatomical Evaluation of an Unusual Feeding Method

PubMed Central

Humphries, Stuart; Bonser, Richard H. C; Witton, Mark P; Martill, David M

2007-01-01

Similarities between the anatomies of living organisms are often used to draw conclusions regarding the ecology and behaviour of extinct animals. Several pterosaur taxa are postulated to have been skim-feeders based largely on supposed convergences of their jaw anatomy with that of the modern skimming bird, Rynchops spp. Using physical and mathematical models of Rynchops bills and pterosaur jaws, we show that skimming is considerably more energetically costly than previously thought for Rynchops and that pterosaurs weighing more than one kilogram would not have been able to skim at all. Furthermore, anatomical comparisons between the highly specialised skull of Rynchops and those of postulated skimming pterosaurs suggest that even smaller forms were poorly adapted for skim-feeding. Our results refute the hypothesis that some pterosaurs commonly used skimming as a foraging method and illustrate the pitfalls involved in extrapolating from limited morphological convergence. PMID:17676976

An Accessory Muscle of Pectoral Region: A Case Report

PubMed Central

Bannur, B.M.; Mallashetty, Nagaraj; Endigeri, Preetish

2013-01-01

Among the variations of pectoral muscles, this case appears to be unique in the literature. This was a case of an accessory pectoral muscle which was located between pectoralis major and pectoralis minor muscles, which was discovered during a routine anatomy dissection. The accessory muscle originated from 6th and 7th ribs at costo-chondral junction, which travelled supero-laterally and inserted by fusing with fibres of pectoralis minor. This unusual muscle holds importance for surgeons while they perform dissectomies, in avoiding complications. PMID:24179919

Endodontic management of mesiobuccal-2 canal in four-rooted and five-canalled mandibular third molar.

PubMed

Garg, Amit Kumar; Bhardwaj, Anuj; Mantri, Vijay R; Agrawal, Neha

2014-05-01

A case of unusual Root morphology is presented to demonstrate anatomic variations in mandibular third molar. The most common configuration of mandibular third molar is two Roots and three canals; however they may have many different combinations. Endodontic treatment was performed in mandibular third molar having aberrant anatomy. Four Root canal orifices were located with the aid of dental operating microscope (DOM) and three separate Roots were diagnosed with radiographs. Spiral computed tomography (SCT) showed the presence of an extra canal and extra Root, indicating a rare anatomic configuration. Looking for additional canals and Roots are important part of successful endodontics, as the knowledge of their existence enable clinicians to treat a case successfully that otherwise might end in failure. The use of DOM and SCT in this case greatly contributed toward making a confirmatory diagnosis and successful endodontic treatment of four-rooted and five-canalled mandibular third molar. Variation in Root canal anatomy is very common. Knowledge of these variations is very essential for successful Root canal outcome, inability to do so can lead to missed canals and failures. Hence, thorough knowledge of Root canal anatomy and advances in diagnostic aids are essential.

Torvosaurus gurneyi n. sp., the Largest Terrestrial Predator from Europe, and a Proposed Terminology of the Maxilla Anatomy in Nonavian Theropods

PubMed Central

Hendrickx, Christophe; Mateus, Octávio

2014-01-01

The Lourinhã Formation (Kimmeridgian-Tithonian) of Central West Portugal is well known for its diversified dinosaur fauna similar to that of the Morrison Formation of North America; both areas share dinosaur taxa including the top predator Torvosaurus, reported in Portugal. The material assigned to the Portuguese T. tanneri, consisting of a right maxilla and an incomplete caudal centrum, was briefly described in the literature and a thorough description of these bones is here given for the first time. A comparison with material referred to Torvosaurus tanneri allows us to highlight some important differences justifying the creation of a distinct Eastern species. Torvosaurus gurneyi n. sp. displays two autapomorphies among Megalosauroidea, a maxilla possessing fewer than eleven teeth and an interdental wall nearly coincidental with the lateral wall of the maxillary body. In addition, it differs from T. tanneri by a reduced number of maxillary teeth, the absence of interdental plates terminating ventrally by broad V-shaped points and falling short relative to the lateral maxillary wall, and the absence of a protuberant ridge on the anterior part of the medial shelf, posterior to the anteromedial process. T. gurneyi is the largest theropod from the Lourinhã Formation of Portugal and the largest land predator discovered in Europe hitherto. This taxon supports the mechanism of vicariance that occurred in the Iberian Meseta during the Late Jurassic when the proto-Atlantic was already well formed. A fragment of maxilla from the Lourinhã Formation referred to Torvosaurus sp. is ascribed to this new species, and several other bones, including a femur, a tibia and embryonic material all from the Kimmeridgian-Tithonian of Portugal, are tentatively assigned to T. gurneyi. A standard terminology and notation of the theropod maxilla is also proposed and a record of the Torvosaurus material from Portugal is given. PMID:24598585

Inflammatory nasal polyps: an unusual late complication of Silastic sheet repair of orbital floor fracture.

PubMed

Andrews, A E; Hicklin, L

2006-02-01

Silastic implants are very widely used in surgical practice and are considered to be relatively inert. They do however present with complications, including infection, local foreign body inflammatory response,calcification, migration and failure of repair of the defect, which sometimes may necessitate explantation. Head and neck implants do present a special case, as complications can cause obstruction and disruption of function in small cavities. A pertinent history, clinical review and computed tomography scan are usually invaluable in obtaining a diagnosis. We present a rare case of migrated Silastic orbital sheet, presenting as a nasal polyp and causing maxillary antral pain and infection. A detailed search of the medical literature revealed no other such case.

Unusual treatment of bimaxillary dentoalveolar protrusion via miniscrews and molar extraction

PubMed Central

Al-Fraidi, Ahmad; Afify, Ahmed R.

2012-01-01

This case report describes the treatment of a Saudi female patient, aged 13 years 8 months at the start of treatment, with a Class I bimaxillary dentoalveolar protrusion and extracted maxillary first molars. Miniscrews were placed bilaterally in the interdental space between both the upper and the lower posterior teeth. The treatment plan consisted of extraction of both lower first permanent molars, distalization of upper and lower premolars using miniscrews followed by en masse retraction of the upper and lower six anterior teeth. The active treatment period was 2 years 8 months. Arch retention was done using upper wrap-around retainer and lower fixed 3-3 retainer. The use of miniscrews helped to resolve the bimaxillary protrusion regardless of extraction pattern used. PMID:24987626

Perineural tumour spread from colon cancer, an unusual cause of trigeminal neuropathy - a case report

PubMed Central

Nair, Kavitha; George, Thomas; El Beltagi, Ahmed

2015-01-01

Malignant trigeminal neuralgia due to perineural spread along the branches of the trigeminal nerve, is known to commonly occur secondary to squamous cell carcinomas, lymphomas and adenoid cystic carcinomas in the head and neck region. Rarely metastases to the trigeminal nerve have been reported in breast cancer, prostate cancer and colon cancer. To the best of our knowledge trigeminal neuropathy due to skull base metastases and perineural spread along the maxillary (V2) and mandibular (V3) branches of the trigeminal nerve, secondary to colon cancer, has not been previously reported. The diagnosis in our index case was made on magnetic resonance imaging, and patient was treated accordingly by fractionated stereotactic radiotherapy, with subsequent relief of her pain. PMID:26629299

A Complex Endomembrane System in the Archaeon Ignicoccus hospitalis Tapped by Nanoarchaeum equitans

DOE PAGES

Heimerl, Thomas; Flechsler, Jennifer; Pickl, Carolin; ...

2017-06-13

Based on serial sectioning, focused ion beam scanning electron microscopy (FIB/SEM), and electron tomography, we depict in detail the highly unusual anatomy of the marine hyperthermophilic crenarchaeon, Ignicoccus hospitalis. Our data support a complex and dynamic endomembrane system consisting of cytoplasmic protrusions, and with secretory function. Moreover, we reveal that the cytoplasm of the putative archaeal ectoparasite Nanoarchaeum equitans can get in direct contact with this endomembrane system, complementing and explaining recent proteomic, transcriptomic and metabolomic data on this inter-archaeal relationship. In addition, we identified a matrix of filamentous structures and/or tethers in the voluminous inter-membrane compartment (IMC) of I.more » hospitalis, which might be responsible for membrane dynamics. Overall, this unusual cellular compartmentalization, ultrastructure and dynamics in an archaeon that belongs to the recently proposed TACK superphylum prompts speculation that the eukaryotic endomembrane system might originate from Archaea.« less

Topographic analysis of maxillary premolars and molars and maxillary sinus using cone beam computed tomography.

PubMed

Yoshimine, Shin-Ichiro; Nishihara, Kazuhide; Nozoe, Etsuro; Yoshimine, Masako; Nakamura, Norifumi

2012-12-01

This study evaluated the anatomical characteristics of the maxillary premolars and molars and the maxillary sinus using cone beam computed tomography (CBCT) for dental implant treatment. Ten linear items and 1 angular item on 30 sites in 30 patients were measured on 3-dimensional computed tomography images using CBCT. The vertical relationship between the maxillary sinus and the maxillary molars was classified into 5 categories. The horizontal thickness of the buccal alveolar bone was thinnest on the maxillary first premolars, and the horizontal thickness of the palatal alveolar bone was thickest on the maxillary second molars. Type II was most common on the maxillary first molars. The internal angle at the maxillary premolars was significantly greater than that at the maxillary molars. The internal angle and vertical distance between the apex of the roots and the maxillary sinus floor showed a positive correlation on the maxillary first premolars (P = 0.003). For the selection of an appropriate approach on dental implant treatment, the evaluation of maxillary premolars and molars using of CBCT can be recommended.

Orthodontic Treatment of Maxillary Incisors with Severe Root Resorption Caused by Bilateral Canine Impaction in a Class II Division 1 Patient.

PubMed

Chang, Na-Young; Park, Jae Hyun; Lee, Mi-Young; Cho, Jin-Woo; Cho, Jin-Hyoung; An, Ki-Yong; Chae, Jong-Moon

2016-01-01

This case report shows the successful alignment of bilateral impacted maxillary canines. A 12-year-old male with the chief complaint of the protrusion of his maxillary anterior teeth happened to have bilateral maxillary canine impaction on the labial side of his maxillary incisors. Four maxillary incisors showed severe root resorption because of the impacted canines. The patient was diagnosed as skeletal Class II malocclusion with proclined maxillary incisors. The impacted canine was carefully retracted using sectional buccal arch wires to avoid further root resorption of the maxillary incisors. To distalize the maxillary dentition, two palatal miniscrews were used. After 25 months of treatment, the maxillary canines were well aligned without any additional root resorption of the maxillary incisors.

[Radiographic study of maxillary sinus associated with molars in adult].

PubMed

Hu, Zhi; Sun, Daming; Zhou, Quansheng; Wang, Yuli; Gu, Jingcheng; Han, Yaohua

2014-12-01

to explore the relationship between the maxillary sinus volume and the amount of alveolar bone, and the effect of molar loss upon the maxillary sinus was further analyzed,by measuring adult maxillary sinus volume, sinus ridge distance, and calculating the gasification coefficient of maxillary sinus. One hundred and ninety cases (361 maxillary sinus) with CT examinations were collected, they were divided into group A and group B, 121 cases (242 maxillary sinus) of normal subjects served as group A, 42 cases (65 maxillary sinus) with molar part off were B group, in which 31 maxillary sinus with a molar loss were group B1,22 maxillary sinus with two molar loss were B2 group,12 maxillary sinus with three molar loss (one molar remains) were B3 group, 27 cases (54 maxillary sinus) with upper teeth off were C group. Bymeasureing the maxillary sinus volume, sinus ridge distance and the size of the maxillary sinus, calculating the gasification coefficient, we analyzed the relationship between maxillary volume and sinus ridge distance, and comparatively analyzed the differences among the three groups in the size, gasification coefficient, volume of maxillary sinus and sinus ridge distance. In the normal group,the volume of maxillary sinus and sinus ridge distance had a correlation coefficient of -0. 63,(P< 0.05); Sinus ridge distance in group A was larger than the other two groups (P<0.05), and larger in B group than in C group (P<0. 05), anteroposterior maxillary sinus diameter and reft-right diameter in C group was greater than in A group and B group(P<0.05), group C gasification coeffiecent was less than A group and B group (P<0. 05). The volume of maxillary sinus is negatively correlated with the amont of alveolar bone; Upper teeth's shedding promotes maxillary sinus deformation; Maxiuary sinus volume has a tendency to decrease.

Leonardo da Vinci's "A skull sectioned": skull and dental formula revisited.

PubMed

Gerrits, Peter O; Veening, Jan G

2013-05-01

What can be learned from historical anatomical drawings and how to incorporate these drawings into anatomical teaching? The drawing "A skull sectioned" (RL 19058v) by Leonardo da Vinci (1452-1519), hides more detailed information than reported earlier. A well-chosen section cut explores sectioned paranasal sinuses and ductus nasolacrimalis. A dissected lateral wall of the maxilla is also present. Furthermore, at the level of the foramen mentale, the drawing displays compact and spongious bony components, together with a cross-section through the foramen mentale and its connection with the canalis mandibulae. Leonardo was the first to describe a correct dental formula (6424) and made efforts to place this formula above the related dental elements. However, taking into account, the morphological features of the individual elements of the maxilla, it can be suggested that Leonardo sketched a "peculiar dental element" on the position of the right maxillary premolar in the dental sketch. The fact that the author did not make any comment on that special element is remarkable. Leonardo could have had sufficient knowledge of the precise morphology of maxillary and mandibular premolars, since the author depicted these elements in the dissected skull. The fact that the author also had access to premolars in situ corroborates our suggestion that "something went wrong" in this part of the drawing. The present study shows that historical anatomical drawings are very useful for interactive learning of detailed anatomy for students in medicine and dentistry. Copyright © 2012 Wiley Periodicals, Inc.

Skeletal response to maxillary protraction with and without maxillary expansion: a finite element study.

PubMed

Gautam, Pawan; Valiathan, Ashima; Adhikari, Raviraj

2009-06-01

The purpose of this finite element study was to evaluate biomechanically 2 treatment modalities-maxillary protraction alone and in combination with maxillary expansion-by comparing the displacement of various craniofacial structures. Two 3-dimensional analytical models were developed from sequential computed tomography scan images taken at 2.5-mm intervals of a dry young skull. AutoCAD software (2004 version, Autodesk, San Rafael, Calif) and ANSYS software (version 10, Belcan Engineering Group, Cincinnati, Ohio) were used. The model consisted of 108,799 solid 10 node 92 elements, 193,633 nodes, and 580,899 degrees of freedom. In the first model, maxillary protraction forces were simulated by applying 1 kg of anterior force 30 degrees downward to the palatal plane. In the second model, a 4-mm midpalatal suture opening and maxillary protraction were simulated. Forward displacement of the nasomaxillary complex with upward and forward rotation was observed with maxillary protraction alone. No rotational tendency was noted when protraction was carried out with 4 mm of transverse expansion. A tendency for anterior maxillary constriction after maxillary protraction was evident. The amounts of displacement in the frontal, vertical, and lateral directions with midpalatal suture opening were greater compared with no opening of the midpalatal suture. The forward and downward displacements of the nasomaxillary complex with maxillary protraction and maxillary expansion more closely approximated the natural growth direction of the maxilla. Displacements of craniofacial structures were more favorable for the treatment of skeletal Class III maxillary retrognathia when maxillary protraction was used with maxillary expansion. Hence, biomechanically, maxillary protraction combined with maxillary expansion appears to be a superior treatment modality for the treatment of maxillary retrognathia than maxillary protraction alone.

A novel biomechanical model assessing continuous orthodontic archwire activation

PubMed Central

Canales, Christopher; Larson, Matthew; Grauer, Dan; Sheats, Rose; Stevens, Clarke; Ko, Ching-Chang

2013-01-01

Objective The biomechanics of a continuous archwire inserted into multiple orthodontic brackets is poorly understood. The purpose of this research was to apply the birth-death technique to simulate insertion of an orthodontic wire and consequent transfer of forces to the dentition in an anatomically accurate model. Methods A digital model containing the maxillary dentition, periodontal ligament (PDL), and surrounding bone was constructed from human computerized tomography data. Virtual brackets were placed on four teeth (central and lateral incisors, canine and first premolar), and a steel archwire (0.019″ × 0.025″) with a 0.5 mm step bend to intrude the lateral incisor was virtually inserted into the bracket slots. Forces applied to the dentition and surrounding structures were simulated utilizing the birth-death technique. Results The goal of simulating a complete bracket-wire system on accurate anatomy including multiple teeth was achieved. Orthodontic force delivered by the wire-bracket interaction was: central incisor 19.1 N, lateral incisor 21.9 N, and canine 19.9 N. Loading the model with equivalent point forces showed a different stress distribution in the PDL. Conclusions The birth-death technique proved to be a useful biomechanical simulation method for placement of a continuous archwire in orthodontic brackets. The ability to view the stress distribution throughout proper anatomy and appliances advances understanding of orthodontic biomechanics. PMID:23374936

A Novel Marker Based Method to Teeth Alignment in MRI

NASA Astrophysics Data System (ADS)

Luukinen, Jean-Marc; Aalto, Daniel; Malinen, Jarmo; Niikuni, Naoko; Saunavaara, Jani; Jääsaari, Päivi; Ojalammi, Antti; Parkkola, Riitta; Soukka, Tero; Happonen, Risto-Pekka

2018-04-01

Magnetic resonance imaging (MRI) can precisely capture the anatomy of the vocal tract. However, the crowns of teeth are not visible in standard MRI scans. In this study, a marker-based teeth alignment method is presented and evaluated. Ten patients undergoing orthognathic surgery were enrolled. Supraglottal airways were imaged preoperatively using structural MRI. MRI visible markers were developed, and they were attached to maxillary teeth and corresponding locations on the dental casts. Repeated measurements of intermarker distances in MRI and in a replica model was compared using linear regression analysis. Dental cast MRI and corresponding caliper measurements did not differ significantly. In contrast, the marker locations in vivo differed somewhat from the dental cast measurements likely due to marker placement inaccuracies. The markers were clearly visible in MRI and allowed for dental models to be aligned to head and neck MRI scans.

An application framework of three-dimensional reconstruction and measurement for endodontic research.

PubMed

Gao, Yuan; Peters, Ove A; Wu, Hongkun; Zhou, Xuedong

2009-02-01

The purpose of this study was to customize an application framework by using the MeVisLab image processing and visualization platform for three-dimensional reconstruction and assessment of tooth and root canal morphology. One maxillary first molar was scanned before and after preparation with ProTaper by using micro-computed tomography. With a customized application framework based on MeVisLab, internal and external anatomy was reconstructed. Furthermore, the dimensions of root canal and radicular dentin were quantified, and effects of canal preparation were assessed. Finally, a virtual preparation with risk analysis was performed to simulate the removal of a broken instrument. This application framework provided an economical platform and met current requirements of endodontic research. The broad-based use of high-quality free software and the resulting exchange of experience might help to improve the quality of endodontic research with micro-computed tomography.

Immediate Implant Placement of a Single Central Incisor Using a CAD/CAM Crown-Root Form Technique: Provisional to Final Restoration.

PubMed

Vafiadis, Dean; Goldstein, Gary; Garber, David; Lambrakos, Anthony; Kowalski, Bj

2017-02-01

Preserving soft and hard tissues after extraction and implant placement is crucial for anterior esthetics. This technique will show how the information gathered from a cone-beam computed tomography (CBCT) scan of the maxillary left central incisor and an intra-oral digital impression can be merged to fabricate a CAD/CAM crown-root matrix to be used as an immediate provisional restoration that mimics the natural anatomy. Due to trauma, a left central incisor appeared to be fractured and was scheduled for extraction and implant placement. The crown-root configuration captured by the CBCT scan was merged with the digital files from an intra-oral digital impression. A CAD/CAM crown-root matrix was fabricated. Because the matrix shell was fabricated with the exact anatomy of the natural tooth, it replicated the position and three dimensional anatomy of the soft and hard tissue. It was connected to the implant with a customized provisional abutment. A digital impression of a coded healing abutment was made to fabricate the final implant abutment and final restoration. Throughout the treatment time and 36 months after completion, the thickness of tissue, emergence profile, and adjacent papilla was analyzed by clinical evaluation and photography and seemed to be maintained. The use of a pre-operative intra-oral digital scan of the clinical crown-root architecture and the CBCT scan of the bone/root anatomy, can be used together to fabricate a CAD/CAM crown-root form provisional matrix. This digital design helps in the preservation of the 3D tissue topography, as well as the final restoration. The preservation of soft and hard tissue after extraction and implant placement has always been paramount for ideal anterior implant esthetics. Using the information from digital files from CBCT scans and intra-oral scans may help the clinician identify critical anatomical features that can be replicated in the provisional and final CAD/CAM restoration. (J Esthet Restor Dent 29:13-21, 2017). © 2016 Wiley Periodicals, Inc.

The Braincase and Neurosensory Anatomy of an Early Jurassic Marine Crocodylomorph: Implications for Crocodylian Sinus Evolution and Sensory Transitions.

PubMed

Brusatte, Stephen L; Muir, Amy; Young, Mark T; Walsh, Stig; Steel, Lorna; Witmer, Lawrence M

2016-11-01

Modern crocodylians are a morphologically conservative group, but extinct relatives (crocodylomorphs) experimented with a wide range of diets, behaviors, and body sizes. Among the most unusual of these fossil groups is the thalattosuchians, an assemblage of marine-dwellers that transitioned from semiaquatic species (teleosaurids and kin) into purely open-ocean forms (metriorhynchids) during the Jurassic and Cretaceous Periods (ca 191-125 million years ago). Thalattosuchians can give insight into the origin of modern crocodylian morphologies and how anatomy and behavior change during a major evolutionary transition into a new habitat. Little is known, however, about their brains, sensory systems, cranial sinuses, and vasculature. We here describe the endocranial anatomy of a well-preserved specimen of the Jurassic semiaquatic teleosaurid Steneosaurus cf. gracilirostris using X-ray micro-CT. We find that this teleosaurid still had an ear well attuned to hear on land, but had developed large internal carotid and orbital arteries that likely supplied salt glands, previously thought to be present in only the fully pelagic metriorhynchids. There is no great gulf in endocranial anatomy between this teleosaurid and the metriorhynchids, and some of the features that later permitted metriorhynchids to invade the oceanic realm were apparently first developed in semiaquatic taxa. Compared to modern crocodylians, Steneosaurus cf. gracilirostris has a more limited set of pharyngotympanic sinuses, but it is unclear whether this relates to its aquatic habitat or represents the primitive condition of crocodylomorphs that was later elaborated. Anat Rec, 299:1511-1530, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Complex vibratory patterns in an elephant larynx.

PubMed

Herbst, Christian T; Svec, Jan G; Lohscheller, Jörg; Frey, Roland; Gumpenberger, Michaela; Stoeger, Angela S; Fitch, W Tecumseh

2013-11-01

Elephants' low-frequency vocalizations are produced by flow-induced self-sustaining oscillations of laryngeal tissue. To date, little is known in detail about the vibratory phenomena in the elephant larynx. Here, we provide a first descriptive report of the complex oscillatory features found in the excised larynx of a 25 year old female African elephant (Loxodonta africana), the largest animal sound generator ever studied experimentally. Sound production was documented with high-speed video, acoustic measurements, air flow and sound pressure level recordings. The anatomy of the larynx was studied with computed tomography (CT) and dissections. Elephant CT vocal anatomy data were further compared with the anatomy of an adult human male. We observed numerous unusual phenomena, not typically reported in human vocal fold vibrations. Phase delays along both the inferior-superior and anterior-posterior (A-P) dimension were commonly observed, as well as transverse travelling wave patterns along the A-P dimension, previously not documented in the literature. Acoustic energy was mainly created during the instant of glottal opening. The vestibular folds, when adducted, participated in tissue vibration, effectively increasing the generated sound pressure level by 12 dB. The complexity of the observed phenomena is partly attributed to the distinct laryngeal anatomy of the elephant larynx, which is not simply a large-scale version of its human counterpart. Travelling waves may be facilitated by low fundamental frequencies and increased vocal fold tension. A travelling wave model is proposed, to account for three types of phenomena: A-P travelling waves, 'conventional' standing wave patterns, and irregular vocal fold vibration.

[Stimulation and evaluation on maxillary distraction osteogenesis using CASSOS 2001].

PubMed

Zhu, Min; Qiu, Wei-liu; Tang, You-sheng; Li, Qing-yun

2002-09-01

To simulate maxillary distraction osteogenesis and evaluate the change of soft and hard tissue before and after treatment, using Computer-Assisted Simulation System for Orthognathic Surgery( CASSOS 2001). A fourteen-year-old boy with severe maxillary hypoplasia, due to unilateral cleft lip and palate, was analysed by cephalometric analysis. The simulations of maxillary distraction osteogenesis (Le Fort I osteotomy and Le Fort II osteotomy) were re-analysed. After the treatment, cephalometric analysis was preformed again. The data were compared. The maxillary hypoplasia was well treated using maxillary distraction osteogenesis; Compared with Le fort I osteotomy, more satisfactory results can be obtained by Le fort I distraction osteogenesis. Maxillary distraction osteogenesis is a better way to treat severe maxillary hypoplasia with operated CLP than maxillary osteotomy. CASSOS 2001 can help surgeons and patients on simulation and evaluation of maxillary distraction osteogenesis, and on decision of treatment plan.

A morphometric analysis of maxillary molar crowns of Middle-Late Pleistocene hominins.

PubMed

Bailey, Shara E

2004-09-01

This study explores the significance of shape differences in the maxillary first molar crowns of Neandertals and anatomically modern humans. It uses morphometric analysis to quantify these differences and to investigate how the orientation of major cusps, relative cusp base areas and occlusal polygon area influence crown shape. The aims of this study were to 1) quantify these data to test whether the tooth shapes of Neandertals and anatomically modern humans differ significantly and 2) to explore if either of the shapes is derived relative to earlier fossil hominins. Data were collected from digital occlusal photographs using image-processing software. Cusp angles, relative cusp base areas and occlusal polygon areas were measured on Neandertals (n=15), contemporary modern humans (n=62), Upper Paleolithic humans (n=6), early anatomically modern humans (n=3) and Homo erectus (n=3). Univariate and multivariate statistical tests were used to evaluate the differences between contemporary modern humans and Neandertals, while the much sparser data sets from the other fossil samples were included primarily for comparison. Statistically significant differences reflecting overall crown shape and internal placement of the crown apices were found. Neandertals are distinguished from contemporary humans by possessing maxillary first molars that 1) are markedly skewed; 2) possess a narrower distal segment of the occlusal polygon compared to the mesial segment; 3) possess a significantly smaller metacone and a significantly larger hypocone; and 4) possess a significantly smaller relative occlusal polygon area reflecting internally placed cusps. Differences in relative cusp base areas of the hypocone and metacone may contribute to the shape differences observed in Neandertals. However, early anatomically modern humans possessing a pattern of relative cusp base areas similar to Neandertals lack their unusual shape. That the morphology observed in non-Neandertal fossil hominins is more anatomically modern human-like than Neandertal-like, suggests that this distinctive morphology may be derived in Neandertals.

The incidence and morphology of maxillary sinus septa in dentate and edentulous maxillae: a cadaveric study with a brief review of the literature

PubMed Central

Wabale, Rajendra Namdeo; Siddiqui, Abu Ubaida; Farooqui, Mujjebuddeen Samsudeen

2015-01-01

Objectives The aim of this study is to determine the incidence, location, and orientation of maxillary sinus septa in formalin embalmed cadavers. Materials and Methods The study was conducted on 210 cadaveric heads available in our department. After taking the mid-sagittal section the specimens were opened from the medial aspect and the sinus cavity was explored for the presence of maxillary sinus septa, their anatomical plane, location and dimensions. Results The mean linear distance between maxillary sinus floor and its anatomical ostium was 26.76±5.21 mm and 26.91±4.96 mm on right and left side, respectively. A total of 59 maxillary sinus septa (28.1%) were observed in 210 maxillary specimens. Septae were most common, 33 septa (55.9%), in the middle region (between first and second molar tooth) of the sinus cavity. The maxillary sinus membrane (Schneiderian membrane) adhered tightly to the maxillary sinus and over the septae. Significantly more maxillary sinus septa were observed in edentulous maxillae in comparison to the dentate upper jaw. Conclusion Knowledge of location of maxillary sinus ostium is mandatory for the rhinologist for drainage of secretions in maxillary sinusitis. The morphological details of maxillary sinus septa, particularly their location and anatomical planes, will guide dentists in performance of safe implant surgeries. The maxillary antrum septa of category I and II may complicate the procedure of inversion of bone plate and elevation of sinus membrane during maxillary augmentation surgeries. The category III septa observed in the sagittal plane were embedded by one of the branches of the infraorbital nerve in it, and if accidentally cut will lead to infraorbital nerve palsy in maxillary sinus surgeries. PMID:25741466

Is Le Fort I Osteotomy Associated With Maxillary Sinusitis?

PubMed

Nocini, Pier Francesco; D'Agostino, Antonio; Trevisiol, Lorenzo; Favero, Vittorio; Pessina, Mattia; Procacci, Pasquale

2016-02-01

The purpose of the present study was to investigate the association between Le Fort I osteotomy and the anatomic, radiologic, and symptomatic modifications of the maxillary sinus. Subjects who had undergone Le Fort I osteotomy from January 2008 to December 2013 were enrolled in a retrospective cohort study. The eligibility criteria were the availability of a cone beam computed tomography (CBCT) scan taken before and 12 to 24 months after the procedure. The exclusion criteria were the unavailability of CBCT scans, the use of tobacco, and previous orthognathic procedures. The primary predictor variable was time (pre-vs postoperative). The primary outcome variables were the sinus volume, mucosal thickening, iatrogenic alterations in the sinus anatomy, and rhinosinusitis symptoms, evaluated using the Sino-Nasal Outcome 20-item Test (SNOT-20). Descriptive statistics were computed for each variable, and paired analyses were used to compare the pre- and postoperative values. The data from 64 subjects (mean age 27; 59.4% were female; median follow-up 32.4 months, range 13 to 66 months) were studied. Postoperatively, 1.6% of the sample (0% preoperatively) had moderate-to-severe and 15.6% (3.1% preoperatively) had mild-to-moderate sinusitis symptoms. The rest of the sample presented with mild to no symptoms. The increase in the SNOT scores after surgery was statistically significant (P = .016). Radiologic evidence of postoperative inflammatory processes affecting the paranasal sinuses was found in 27.3% of the sinuses (9.4% preoperatively). The postoperative Lund-Mackay scores were significantly greater (P = .0005). A 19% decrease was found in the mean postoperative sinus volume, with a 37% incidence of iatrogenic injury. The study results indicate that Le Fort I osteotomies can have an important impact on sinus health. The postoperative radiologic evidence of maxillary sinus inflammatory processes and the incidence of rhinosinusitis symptoms and iatrogenic damage in these patients have led us to conclude that CBCT scans and the SNOT-20 questionnaire should be used routinely during postoperative monitoring. Larger long-term studies are warranted to clarify the postoperative outcomes and complications. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Comparison of computed tomography and high-field (3.0 T) magnetic resonance imaging of age-related variances in selected equine maxillary cheek teeth and adjacent tissues.

PubMed

Schoppe, Christin; Hellige, Maren; Rohn, Karl; Ohnesorge, Bernhard; Bienert-Zeit, Astrid

2017-09-06

Modern imaging techniques such as computed tomography (CT) and magnetic resonance imaging (MRI) have the advantage of producing images without superimposition. Whilst CT is a well-established technique for dental diagnostics, MRI examinations are rarely used for the evaluation of dental diseases in horses. Regarding equine endodontic therapies which are increasingly implemented, MRI could help to portray changes of the periodontal ligament and display gross pulpar anatomy. Knowledge of age-related changes is essential for diagnosis, as cheek teeth and surrounding structures alter with increasing age. The aim of the present study was to highlight the advantages of CT and MRI regarding age-related changes in selected equine cheek teeth and their adjacent structures. The CT and MRI appearances of the maxillary 08 s and 09 s and adjacent structures were described by evaluation of post-mortem examinations of nine horses of different ages (Group A: <6 years, B: 6-15 years, C: ≥16 years). Most of the tissues selected were imaged accurately with MRI and CT. Magnetic resonance imaging gives an excellent depiction of soft endo- and periodontal units, and CT of hard dental and bony tissues. Negative correlation between dental age and pulpar sizes was found: 71.3% of the changes in pulp dimensions can be explained by teeth aging. Pulpar sizes ranged from 14.3 to 1.3 mm and were significantly smaller in older horses (p < 0.05). A common pulp chamber was present in 33% of the teeth with a mean dental age of 2.25 years. Ninety-four percent of the 08 and 09 alveoli of all groups were in direct contact with the maxillary sinus. An age-related regression was found (R 2  = 0.88) for the distance between alveoli and the infraorbital canal. The present study provides information about the dental and periodontal age-related morphology and its visibility using different imaging techniques. These results aid in evaluating diagnostic images and in deciding which is the superior imaging modality for clinical cases.

Maxillary advancement using distraction osteogenesis with intraoral device.

PubMed

Takigawa, Yoko; Uematsu, Setsuko; Takada, Kenji

2010-11-01

This article describes the surgical orthodontic treatment of maxillary hypoplasia in a patient with cleft lip and palate using maxillary distraction osteogenesis with internal maxillary distractors. Maxillary advancement was performed to correct the retrusive maxillary facial profile and Class III malocclusion. Rotational movement of the distraction segment was made to correct the upper dental midline. Although maxillary advancement was insufficient because of unexpected breakage of the intraoral distractor after completion of the distraction, skeletal traction with a face mask compensated for the shortage. Successful esthetic improvement and posttreatment occlusal stability were achieved with no discernible relapse after 2 years of retention.

A retrospective study comparing the loss of anchorage following the extraction of maxillary first or second premolars during orthodontic treatment with fixed appliances in adolescent patients.

PubMed

Haque, Samantha; Sandler, Jonathan; Cobourne, Martyn T; Bassett, Paul; DiBiase, Andrew T

2017-12-01

This retrospective study assessed the difference in anchorage loss using 3D superimposition of study models between cases treated with extraction of maxillary first premolars and maxillary second premolars carried out in orthodontic specialist practice. Sixty subjects who have undergone extractions of either maxillary first or second premolars as part of their orthodontic treatment were selected. Eligibility criteria included patients with a Class I, mild Class II or III malocclusions, mild-to-moderate crowding with no anchorage reinforcement. Pre- and post-treatment maxillary dental study cases were scanned using a surface laser scanner to produced 3D digital images which were superimposed using areas of stability on the anterior hard palate. Anchorage loss was measured by the mesial movement of the maxillary first permanent molar. The mean mesial movement for the maxillary first molars, when adjusted for confounding factors was 4.7 mm (SD 1.6) in the maxillary first premolar extraction group and 4.6 mm (SD 1.6) in the maxillary second premolar extraction group. There is no difference in anchorage loss when comparing the extraction of the maxillary first premolars to the extraction maxillary second premolars.

Clinical and radiographic evaluation of maxillary central incisors exposure in patients undergoing maxillary advancement

PubMed Central

Trento, Guilherme dos Santos; Bernabé, Felipe Bueno Rosettti; da Costa, Delson João; Rebellato, Nelson Luis Barbosa; Klüppel, Leandro Eduardo; Scariot, Rafaela

2015-01-01

Abstract Introduction: Patients with dentofacial deformities may undergo orthodontic or orthodontic-surgical treatment. Both modalities can affect esthetics. Objective: This study aims to evaluate clinical and radiographic changes in exposure of maxillary central incisors occurring after orthognathic surgery for maxillary advancement. Methods: A total of 17 patients who underwent orthognathic surgery for maxillary advancement between September, 2010 and July, 2011 were selected. Exposure of maxillary central incisors was evaluated clinically and by lateral cephalograms. Measurements were taken one week before and three months after surgery. Data were paired in terms of sex, age, nasolabial angle, height and thickness of the upper lip, the amount of maxillary advancement, clinical exposure and inclination of maxillary central incisor by statistical tests (CI 95%). Results: After maxillary advancement, incisor clinical exposure had increased even with relaxed lips and under forced smile. Moreover, there was a mean increase of 23.33% revealed by lateral cephalograms. There was an inverse correlation between upper lip thickness and incisors postsurgical exposure revealed by radiographic images (p = 0.002). Conclusions: Significant changes in the exposure of maxillary central incisors occur after maxillary advancement, under the influence of some factors, especially lip thickness. PMID:26691970

Vocal anatomy, tongue protrusion behaviour and the acoustics of rutting roars in free-ranging Iberian red deer stags (Cervus elaphus hispanicus).

PubMed

Frey, Roland; Volodin, Ilya; Volodina, Elena; Carranza, Juan; Torres-Porras, Jerónimo

2012-03-01

Roaring in rutting Iberian red deer stags Cervus elaphus hispanicus is unusual compared to other subspecies of red deer, which radiated from the Iberian refugium after the last glacial maximum. In all red deer stags, the larynx occupies a permanent low mid-neck resting position and is momentarily retracted almost down to the rostral end of the sternum during the production of rutting calls. Simultaneous with the retraction of the larynx, male Iberian red deer pronouncedly protrude the tongue during most of their rutting roars. This poses a mechanical challenge for the vocal tract (vt) and for the hyoid apparatus, as tongue and larynx are strongly pulled in opposite directions. This study (i) examines the vocal anatomy and the acoustics of the rutting roars in free-ranging male C. e. hispanicus; (ii) establishes a potential mechanism of simultaneous tongue protrusion and larynx retraction by applying a two-dimensional model based on graphic reconstructions in single video frames of unrestrained animals; and (iii) advances a hypothesis of evaporative cooling by tongue protrusion in the males of a subspecies of red deer constrained to perform all of the exhausting rutting activities, including acoustic display, in a hot and arid season. © 2012 The Authors. Journal of Anatomy © 2012 Anatomical Society.

Endocranial Morphology of the Extinct North American Lion (Panthera atrox).

PubMed

Cuff, Andrew R; Stockey, Christopher; Goswami, Anjali

2016-01-01

The extinct North American lion (Panthera atrox) is one of the largest felids (Mammalia, Carnivora) to have ever lived, and it is known from a plethora of incredibly well-preserved remains. Despite this abundance of material, there has been little research into its endocranial anatomy. CT scans of a skull of P. atrox from the Pleistocene La Brea Tar pits were used to generate the first virtual endocranium for this species and to elucidate previously unknown details of its brain size and gross structure, cranial nerves, and inner-ear morphology. Results show that its gross brain anatomy is broadly similar to that of other pantherines, although P. atrox displays less cephalic flexure than either extant lions or tigers, instead showing a brain shape that is reminiscent of earlier felids. Despite this unusual reduction in flexure, the estimated absolute brain size for this specimen is one of the largest reported for any felid, living or extinct. Its encephalization quotient (brain size as a fraction of the expected brain mass for a given body mass) is also larger than that of extant lions but similar to that of the other pantherines. The advent of CT scans has allowed nondestructive sampling of anatomy that cannot otherwise be studied in these extinct lions, leading to a more accurate reconstruction of endocranial morphology and its evolution. © 2017 S. Karger AG, Basel.

Occurrence and forms of Kranz anatomy in photosynthetic organs and characterization of NAD-ME subtype C4 photosynthesis in Blepharis ciliaris (L.) B. L. Burtt (Acanthaceae).

PubMed

Akhani, Hossein; Ghasemkhani, Maraym; Chuong, Simon D X; Edwards, Gerald E

2008-01-01

Blepharis (Acanthaceae) is an Afroasiatic genus comprising 129 species which occur in arid and semi-arid habitats. This is the only genus in the family which is reported to have some C(4) species. Blepharis ciliaris (L.) B. L. Burtt. is a semi-desert species with distribution in Iran, Oman, and Pakistan. Its form of photosynthesis was investigated by studying different organs. C(4)-type carbon isotope composition, the presence of atriplicoid type Kranz anatomy, and compartmentation of starch all indicate performance of C(4) photosynthesis in cotyledons, leaves, and the lamina part of bracts. A continuous layer of distinctive bundle sheath cells (Kranz cells) encircle the vascular bundles in cotyledons and the lateral vascular bundles in leaves. In older leaves, there is extensive development of ground tissue in the midrib and the Kranz tissue becomes interrupted on the abaxial side, and then becomes completely absent in the mature leaf base. Cotyledons have 5-6 layers, and leaves 2-3 layers, of spongy chlorenchyma beneath the veins near the adaxial side of the leaf, indicating bifacial organization of chlorenchyma. As the plant matures, bracts and spines develop and contribute to carbon assimilation through an unusual arrangement of Kranz anatomy which depends on morphology and exposure to light. Stems do not contribute to carbon assimilation, as they lack chlorenchyma tissue and Kranz anatomy. Analysis of C(4) acid decarboxylases by western blot indicates B. ciliaris is an NAD-malic enzyme type C(4) species, which is consistent with the Kranz cells having chloroplasts with well-developed grana and abundant mitochondria.

Thiel embalming technique: a valuable method for teaching oral surgery and implantology.

PubMed

Hölzle, Frank; Franz, Eric-Peter; Lehmbrock, Jutta; Weihe, Stephan; Teistra, Christian; Deppe, Herbert; Wolff, Klaus-Dietrich

2012-03-01

Because of its high requirements on surgical experience and the need of complete understanding of the anatomy, oral surgery and especially implantology belong to the most demanding procedures in dentistry. Therefore, hands-on courses for oral surgery and implantology are considered a prerequisite to prepare for clinical practice. To achieve teaching conditions as realistic as possible, we used a novel human cadaver embalming method enabling tissue dissection comparable with the living body. Thirty cadavers which were offered by the Institute of Anatomy for the purpose of running oral surgery and implantology courses were embalmed in the technique described by Thiel. On each cadaver, dissection of soft and hard tissue and implantological procedures were performed according to a structured protocol by each course participant. The conservation of fine anatomical structures and the suitability of the embalmed tissue for dissecting, drilling, and suturing were observed and photographically documented. By means of the Thiel embalming technique, oral surgery and implantological procedures could be performed under realistic conditions similar to the living body. Due to the conservation procedure, preparations could be carried out without any time limit, always maintaining the same high quality of the tissue. The maxillary sinus membrane, mucosa, bone, and nerves could be exposed and allowed dissecting, drilling, and suturing even after weeks like fresh specimens. The Thiel embalming method is a unique technique which is ideally suited to practice and teach oral surgery and implantology on human material. © 2009 Wiley Periodicals, Inc.

Pulmonary anatomy and a case of unilateral aplasia in a common snapping turtle (Chelydra serpentina): developmental perspectives on cryptodiran lungs.

PubMed

Schachner, E R; Sedlmayr, J C; Schott, R; Lyson, T R; Sanders, R K; Lambertz, M

2017-12-01

The common snapping turtle (Chelydra serpentina) is a well studied and broadly distributed member of Testudines; however, very little is known concerning developmental anomalies and soft tissue pathologies of turtles and other reptiles. Here, we present an unusual case of unilateral pulmonary aplasia, asymmetrical carapacial kyphosis, and mild scoliosis in a live adult C. serpentina. The detailed three-dimensional (3D) anatomy of the respiratory system in both the pathological and normal adult C. serpentina, and a hatchling are visualized using computed tomography (CT), microCT, and 3D digital anatomical models. In the pathological turtle, the right lung consists of an extrapulmonary bronchus that terminates in a blind stump with no lung present. The left lung is hyperinflated relative to the normal adult, occupying the extra coelomic space facilitated by the unusual mid-carapacial kyphotic bulge. The bronchial tree of the left lung retains the overall bauplan of the normal specimens, with some minor downstream variation in the number of secondary airways. The primary difference between the internal pulmonary structure of the pathological individual and that of a normal adult is a marked increase in the surface area and density of the parenchymal tissue originating from the secondary airways, a 14.3% increase in the surface area to volume ratio. Despite this, the aplasia has not had an impact upon the ability of the turtle to survive; however, it did interfere with aquatic locomotion and buoyancy control under water. This turtle represents a striking example of a non-fatal congenital defect and compensatory visceral hypertrophy. © 2017 Anatomical Society.

Anatomy and histology of the brain and sense organs of the antarctic plunderfish Dolloidraco longedorsalis (Perciformes: Notothenioidei: Artedidraconidae), with comments on the brain morphology of other artedidraconids and closely related harpagiferids.

PubMed

Eastman, Joseph T; Lannoo, Michael J

2003-03-01

In the high-latitude shelf waters of Antarctica, fishes in the perciform suborder Notothenioidei dominate the fish fauna and constitute an adaptive radiation and a species flock. The 25 species of notothenioid plunderfishes, comprising four genera of the family Artedidraconidae, contribute substantially to fish species diversity on the high Antarctic shelf. A mental barbel is an autapomorphy for the family. Dolloidraco longedorsalis is the most abundant artedidraconid at depths over 400 m in these waters. In this article we present the anatomy and histology of the brain and special sense organs of Dolloidraco and compare it to the brains of other artedidraconids, closely related harpagiferids, and more generally to other notothenioids. We provide a detailed drawing of the brain and cranial nerves. The brain of Dolloidraco is simple, without external hypertrophy of sensory or motor regions, but contains several unusual features associated with the ventricular system and CSF, including well-developed circumventricular organs, subependymal expansions, and subarachnoid cisterns; and a ventricle in the corpus cerebellum. The brain of Dolloidraco also contains a lobed chief sensory nucleus of the trigeminal nerve that is correlated across species with barbel length. The eyes are large and contain a small choroid rete, a structure previously thought to be absent from members of this family. We document the histology of the duplex retina, olfactory apparatus, cutaneous taste buds, and barbel musculature and innervation. We discuss the role of pedomorphy in producing simplified brain morphologies. We consider the possibility that Dolloidraco is a somatosensory specialist-an unusual feature among vertebrates-and decide that this is unlikely. Copyright 2003 Wiley-Liss, Inc.

Retrospective study of root canal configurations of maxillary third molars in Central India population using cone beam computed tomography Part- I.

PubMed

Rawtiya, Manjusha; Somasundaram, Pavithra; Wadhwani, Shefali; Munuga, Swapna; Agarwal, Manish; Sethi, Priyank

2016-01-01

The aim of this study was to investigate the root and canal morphology of maxillary third molars in Central India population using cone-beam computed tomography (CBCT) analysis. CBCT images of 116 maxillary third molars were observed, and data regarding the number of roots, the number of canals, and Vertucci's Classification in each root was statistically evaluated. Majority of Maxillary third molars had three roots (55.2%) and three canals (37.9%). Most MB root (43.8%), DB root (87.5%), and palatal root (100%) of maxillary third molars had Vertucci Type I. Mesiobuccal root of three-rooted maxillary third molars had Vertucci Type I (43.8%) and Type IV (40.6%) configuration. Overall prevalence of C-shaped canals in maxillary third molars was 3.4%. There was a high prevalence of three-rooted maxillary molars with three canals.

The morphological interaction between the nasal cavity and maxillary sinuses in living humans.

PubMed

Holton, Nathan; Yokley, Todd; Butaric, Lauren

2013-03-01

To understand how variation in nasal architecture accommodates the need for effective conditioning of respired air, it is necessary to assess the morphological interaction between the nasal cavity and other aspects of the nasofacial skeleton. Previous studies indicate that the maxillary sinuses may play a key role in accommodating climatically induced nasal variation such that a decrease in nasal cavity volume is associated with a concomitant increase in maxillary sinus volume. However, due to conflicting results in previous studies, the precise interaction of the nasal cavity and maxillary sinuses, in humans, is unclear. This is likely due to the prior emphasis on nasal cavity size, whereas arguably, nasal cavity shape is more important with regard to the interaction with the maxillary sinuses. Using computed tomography scans of living human subjects (N=40), the goal of this study is to assess the interaction between nasal cavity form and maxillary sinus volume in European- and African-derived individuals with differences in nasal cavity morphology. First, we assessed whether there is an inverse relationship between nasal cavity and maxillary sinus volumes. Next, we examined the relationship between maxillary sinus volume and nasal cavity shape using multivariate regression. Our results show that there is a positive relationship between nasal cavity and maxillary sinus volume, indicating that the maxillary sinuses do not accommodate variation in nasal cavity size. However, maxillary sinus volume is significantly correlated with variation in relative internal nasal breadth. Thus, the maxillary sinuses appear to be important for accommodating nasal cavity shape rather than size. Copyright © 2013 Wiley Periodicals, Inc.

Endodontic treatment of mandibular molars with atypical root canal anatomy: reports of 4 cases.

PubMed

Chauhan, Raju; Singh, Shweta

2015-01-01

The variations in root canal anatomy of multirooted teeth represent a continuous challenge to endodontic diagnosis and treatment. Although the most common configuration of mandibular molars is one containing 2 roots and 3 root canals, there are many different combinations. Very rarely, an additional third (supernumerary) root is seen. When it is located distolingually to the main distal root, this third root is called radix entomolaris (RE), and when it is located mesiobuccally to the mesial root, it is called radix paramolaris (RP). Variations of root canal systems need not always be in the form of extra roots or extra canals. Single roots with single canals can also occur. A general dentist should be aware of these unusual root canal morphologies in mandibular molars for the success of endodontic treatment. These case reports describe the root canal treatment of a case of RE in the mandibular first molar, 2 rare cases of RP (1 each in the mandibular first and second molars), and a mandibular second molar with a single root and root canal.

Salvage rapid maxillary expansion for the relapse of maxillary transverse expansion after Le Fort I with parasagittal osteotomy

PubMed Central

2015-01-01

Maxillary transverse deficiency is one of the most common deformities among occlusal discrepancies. Typical surgical methods are segmental Le Fort I osteotomy and surgically-assisted rapid maxillary expansion (SARME). This patient underwent a parasagittal split with a Le Fort I osteotomy to correct transverse maxillary deficiency. During follow-up, early transverse relapse occurred and rapid maxillary expansion (RME) application with removal of the fixative plate on the constricted side was able to regain the dimension again. RME application may be appropriate salvage therapy for such a case. PMID:25922822

Blood-flow change and recovery of sensibility in the maxillary dental pulp during and after maxillary distraction: a pilot study.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2004-11-01

To examine the change in blood flow and recovery of sensibility in the maxillary dental pulp during and after maxillary distraction. The subjects included 5 patients undergoing high Le Fort I osteotomy and maxillary distraction (D-group) and a reference group of 14 patients who underwent a common single-segment Le Fort I osteotomy, 1-stage maxillary advancement, and mandibular setback surgery (C-group). Eleven (D-group) and 54 (C-group) maxillary incisors were assessed preoperatively and at 1-7 days, 14 days, and 3 months postoperatively. Pulpal blood flow (PBF) was measured by laser Doppler flowmetry, and pulpal sensibility (PS) was investigated by electrodiagnostics. From postoperative days 1 to 5 (the latency period), the PBF tended to be higher in the D-group than in the C-group. From day 6 to 3 months postoperatively (during and after maxillary distraction), the PBF values of the 2 groups were similar. The PS remained negative up to 14 days postoperatively in both groups. However, at 3 months after the operation, a higher proportion (90.9%) of teeth in the D-group was positive for PS. These results suggest that maxillary distraction is a favorable technique for maintenance of PBF and recovery of PS in the maxillary teeth after surgery.

Skeletal anchorage for orthodontic correction of severe maxillary protrusion after previous orthodontic treatment.

PubMed

Tanaka, Eiji; Nishi-Sasaki, Akiko; Hasegawa, Takuro; Nishio, Clarice; Kawai, Nobuhiko; Tanne, Kazuo

2008-01-01

The correction of a severe maxillary protrusion in an adult by distal movement of the maxillary molars has been one of the most difficult biomechanical problems in orthodontics. This article reports on the treatment of an adult case of severe maxillary protrusion and a large overjet treated with a skeletal anchorage system. A female patient, age 22 years and 3 months, complained of the difficulty of lip closure due to severe maxillary protrusion with a gummy smile. Overjet and overbite were +7.6 mm and -0.9 mm, respectively. She had a history of orthodontic treatment in which her maxillary first premolars were extracted. In order to conduct distal movement of the maxillary molars, anchor plates were placed in the zygomatic process. After achieving a Class I molar relationship, retraction and intrusion of the maxillary incisors were performed. After a 2-year treatment, an acceptable occlusion was achieved with a Class I molar relationship. Her convex facial profile with upper lip protrusion was considerably improved, and the lips showed less tension in lip closure. After a 2-year retention period, an acceptable occlusion was maintained without recurrence of maxillary protrusion, indicating a stability of the occlusion. The result of this treatment indicated that skeletal anchorage is of great importance as a remedy for achieving intrusion and retraction of the maxillary incisors in cases of severe maxillary protrusion with a patient who had previous orthodontic treatment.

Rapidly Progressive Maxillary Atelectasis.

PubMed

Elkhatib, Ahmad; McMullen, Kyle; Hachem, Ralph Abi; Carrau, Ricardo L; Mastros, Nicholas

2017-07-01

Report of a patient with rapidly progressive maxillary atelectasis documented by sequential imaging. A 51-year-old man, presented with left periorbital and retro-orbital pain associated with left nasal obstruction. An initial computed tomographic (CT) scan of the paranasal sinuses failed to reveal any significant abnormality. A subsequent CT scan, indicated for recurrence of symptoms 11 months later, showed significant maxillary atelectasis. An uncinectomy, maxillary antrostomy, and anterior ethmoidectomy resulted in a complete resolution of the symptoms. Chronic maxillary atelectasis is most commonly a consequence of chronic rhinosinusitis. All previous reports have indicated a chronic process but lacked documentation of the course of the disease. This report documents a patient of rapidly progressive chronic maxillary atelectasis with CT scans that demonstrate changes in the maxillary sinus (from normal to atelectatic) within 11 months.

Third molars and premolars extraction in conventional orthodontics and in treatments based on maxillary bone remodeling with temporary anchorage: indications and care.

PubMed

Consolaro, Alberto

2017-02-01

A bone is an anatomic structure in constant remodeling, with different, mutant and wonderfully inconstant designs. With every new and immediate functional demand, there are changes in cortical thickness, trabecular bone density and also in direction and size of trabeculae. Bones' non-stopping search is for adjusting to the functions induced by forces and movements required by a certain life style. Conventional orthodontic planning or with temporary anchorage based on bone remodeling takes into consideration the spaces that are - or may be - occupied by the teeth, in the formation of a functional and esthetic dental arch for the patient. In case it is necessary to extract a tooth and the options are the third molars, partially or totally unerupted, and teeth that belong to other dental groups, obviousness recommends - due to mouth anatomy and physiology, as well as pathologic reasons - extracting the third molars, due to of the several reasons described in the present study.

Third molars and premolars extraction in conventional orthodontics and in treatments based on maxillary bone remodeling with temporary anchorage: indications and care

PubMed Central

Consolaro, Alberto

2017-01-01

ABSTRACT A bone is an anatomic structure in constant remodeling, with different, mutant and wonderfully inconstant designs. With every new and immediate functional demand, there are changes in cortical thickness, trabecular bone density and also in direction and size of trabeculae. Bones' non-stopping search is for adjusting to the functions induced by forces and movements required by a certain life style. Conventional orthodontic planning or with temporary anchorage based on bone remodeling takes into consideration the spaces that are - or may be - occupied by the teeth, in the formation of a functional and esthetic dental arch for the patient. In case it is necessary to extract a tooth and the options are the third molars, partially or totally unerupted, and teeth that belong to other dental groups, obviousness recommends - due to mouth anatomy and physiology, as well as pathologic reasons - extracting the third molars, due to of the several reasons described in the present study. PMID:28444013

Computed tomography-based volumetric tool for standardized measurement of the maxillary sinus

PubMed Central

Giacomini, Guilherme; Pavan, Ana Luiza Menegatti; Altemani, João Mauricio Carrasco; Duarte, Sergio Barbosa; Fortaleza, Carlos Magno Castelo Branco; Miranda, José Ricardo de Arruda

2018-01-01

Volume measurements of maxillary sinus may be useful to identify diseases affecting paranasal sinuses. However, literature shows a lack of consensus in studies measuring the volume. This may be attributable to different computed tomography data acquisition techniques, segmentation methods, focuses of investigation, among other reasons. Furthermore, methods for volumetrically quantifying the maxillary sinus are commonly manual or semiautomated, which require substantial user expertise and are time-consuming. The purpose of the present study was to develop an automated tool for quantifying the total and air-free volume of the maxillary sinus based on computed tomography images. The quantification tool seeks to standardize maxillary sinus volume measurements, thus allowing better comparisons and determinations of factors that influence maxillary sinus size. The automated tool utilized image processing techniques (watershed, threshold, and morphological operators). The maxillary sinus volume was quantified in 30 patients. To evaluate the accuracy of the automated tool, the results were compared with manual segmentation that was performed by an experienced radiologist using a standard procedure. The mean percent differences between the automated and manual methods were 7.19% ± 5.83% and 6.93% ± 4.29% for total and air-free maxillary sinus volume, respectively. Linear regression and Bland-Altman statistics showed good agreement and low dispersion between both methods. The present automated tool for maxillary sinus volume assessment was rapid, reliable, robust, accurate, and reproducible and may be applied in clinical practice. The tool may be used to standardize measurements of maxillary volume. Such standardization is extremely important for allowing comparisons between studies, providing a better understanding of the role of the maxillary sinus, and determining the factors that influence maxillary sinus size under normal and pathological conditions. PMID:29304130

Long- and short-term effects of headgear traction with and without the maxillary second molars.

PubMed

Shpack, Nir; Brosh, Tamar; Mazor, Yoav; Shapinko, Yoav; Davidovitch, Moshe; Sarig, Rachel; Reimann, Susanne; Bourauel, Christoph; Vardimon, Alexander D

2014-10-01

A quantitative assessment of maxillary first molar distalization with and without the maxillary second molar (M2) was carried out. Fifty-six cervical headgear patients undergoing fixed appliance orthodontic treatment were divided into 2 groups: before (G - M2) and after (G + M2) eruption of the maxillary second molars (ages, 11.87 ± 1.20, and 13.05 ± 1.55 years, respectively). The tightness of the dental contact point (TDCP) and the space between the second premolar and the maxillary first molar were measured at 6 levels of headgear force (0-15 N) at 3 intervals 6 months apart (T0, T1, T2). Relationships were found between space and TDCP, time, and presence or absence of the maxillary second molar at T1 and T2 (P <0.001). The TDCP decreased and space increased with increase in initial headgear force. An increase in initial force beyond 6 to 9 N did not significantly increase the initial maxillary first molar distalization. The G - M2 TDCP and space measurements were similar to those of G + M2 at T2 with the eruption of the maxillary second molar. From T0 to T1, maxillary first molar distalization was greater in G - M2. In comparison with our previous headgear-alone study, initial distalization with a fully bonded appliance was reduced by 4-fold. Headgear therapy is more effective before the eruption of the maxillary second molar. Once it erupts, the distalization pace of the maxillary first molar is reduced, but it can nevertheless be pursued at a slower pace when the maxillary second molar is present. Copyright © 2014 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Measurement of Lacrimal Sac Fossa Using Orbital Computed Tomography.

PubMed

Kang, Dongwan; Park, Jinhwan; Na, Jaehoon; Lee, Hwa; Baek, Sehyun

2017-01-01

To evaluate the clinical usefulness of measuring the lacrimal sac fossa length using orbital computed tomography in normal Koreans. The authors retrospectively evaluated 140 patients (70 males and 70 females) who underwent orbital computed tomography at Guro Hospital and who had no history of orbital disease or orbital trauma. Computed tomography scans of the right orbit, including the proportion of the lacrimal bone and maxillary bone that comprise the lacrimal sac fossa, were evaluated at 3 different axial planes (lower, middle, and upper levels). Additionally, the mid-point thickness and maximum thickness of the maxillary bone were measured. Finally, the authors also evaluated the relationship between nasal bone height and maxillary bone thickness in the lacrimal sac fossa. Maxillary bone thickness in the lacrimal sac fossa was thicker in males than in females at mid-point thickness and maximum thickness (P < 0.05). However, there was no significant difference in the size of the lacrimal sac fossa and the proportion of the maxillary bone between males and females.In comparisons between maxillary cross-sections, bone thickness was greater toward the upper level of the lacrimal sac fossa (P = 0.008), and the proportion of the maxillary bone was also greater (P = 0.006).Aging had a significant positive correlation with maxillary bone thickness at all 3 axial planes (P < 0.05), but there was no relationship between age and maxillary bone proportion. Nasal bone height and maxillary bone thickness were also not significantly related. In comprising the lacrimal sac fossa, the maxillary bone accounted for a bigger proportion than the lacrimal bone. Male maxillary bone thickness was greater than female thickness. The authors also observed that maxillary bone thickness increased toward the upper areas of the lacrimal sac fossa and with increasing subject age. Understanding the form and variation of a normal lacrimal sac fossa is helpful for preparing for a successful osteotomy with endoscopic dacryocystorhinostomy.

Retrospective study of root canal configurations of maxillary third molars in Central India population using cone beam computed tomography Part- I

PubMed Central

Rawtiya, Manjusha; Somasundaram, Pavithra; Wadhwani, Shefali; Munuga, Swapna; Agarwal, Manish; Sethi, Priyank

2016-01-01

Objective: The aim of this study was to investigate the root and canal morphology of maxillary third molars in Central India population using cone-beam computed tomography (CBCT) analysis. Materials and Methods: CBCT images of 116 maxillary third molars were observed, and data regarding the number of roots, the number of canals, and Vertucci's Classification in each root was statistically evaluated. Results: Majority of Maxillary third molars had three roots (55.2%) and three canals (37.9%). Most MB root (43.8%), DB root (87.5%), and palatal root (100%) of maxillary third molars had Vertucci Type I. Mesiobuccal root of three-rooted maxillary third molars had Vertucci Type I (43.8%) and Type IV (40.6%) configuration. Overall prevalence of C-shaped canals in maxillary third molars was 3.4%. Conclusion: There was a high prevalence of three-rooted maxillary molars with three canals. PMID:27011747

Complications of misdiagnosis of maxillary canine ectopic eruption.

PubMed

Garib, Daniela Gamba; Janson, Guilherme; Baldo, Taiana de Oliveira; dos Santos, Patrícia Bittencourt Dutra

2012-08-01

Ectopic eruption of maxillary canines can be associated with root resorption of adjacent teeth. This case report describes and discusses an interesting case of a 15-year-old girl with a Class III malocclusion and an impacted maxillary canine. Because of the unfavorable position of the ectopic canine and the severe root resorption of the maxillary left central and lateral incisors, the treatment options included extraction of the maxillary permanent canines. The mandibular first premolars were extracted to compensate for the Class III malocclusion. A panoramic radiograph taken earlier in the mixed dentition already indicated a possible eruption disturbance of the maxillary left permanent canine. The importance of early diagnosis of maxillary canine ectopic eruption is highlighted in this case report. The early identification of radiographic signs of an ectopic pathway of eruption should be followed by deciduous canine extraction to prevent canine retention and maxillary incisor root resorption. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

A unique case of "double-orifice aortic valve"-comprehensive assessment by 2-, 3-dimensional, and color Doppler echocardiography.

PubMed

Stirrup, James E; Cowburn, Peter J; Pousios, Dimitrios; Ohri, Sunil K; Shah, Benoy N

2016-09-01

Transesophageal echocardiography (TEE) is a powerful imaging tool for the comprehensive assessment of valvular structure and function. TEE may be of added benefit when anatomy is difficult to delineate accurately by transthoracic echocardiography. In this article, we present 2-, 3-dimensional, and color Doppler TEE images from a male patient with aortic stenosis. A highly unusual and complex pattern of valvular calcification created a functionally "double-orifice" valve. Such an abnormality may have implications for the accuracy of continuous-wave Doppler echocardiography, which assumes a single orifice valve in native aortic valves. © 2016, Wiley Periodicals, Inc.

The dental cavities of equine cheek teeth: three-dimensional reconstructions based on high resolution micro-computed tomography

PubMed Central

2012-01-01

Background Recent studies reported on the very complex morphology of the pulp system in equine cheek teeth. The continuous production of secondary dentine leads to distinct age-related changes of the endodontic cavity. Detailed anatomical knowledge of the dental cavities in all ages is required to explain the aetiopathology of typical equine endodontic diseases. Furthermore, data on mandibular and maxillary pulp systems is in high demand to provide a basis for the development of endodontic therapies. However, until now examination of the pulp cavity has been based on either sectioned teeth or clinical computed tomography. More precise results were expected by using micro-computed tomography with a resolution of about 0.1 mm and three-dimensional reconstructions based on previous greyscale analyses and histological verification. The aim of the present study was to describe the physiological configurations of the pulp system within a wide spectrum of tooth ages. Results Maxillary teeth: All morphological constituents of the endodontic cavity were present in teeth between 4 and 16 years: Triadan 06s displayed six pulp horns and five root canals, Triadan 07-10s five pulp horns and four root canals and Triadan 11s seven pulp horns and four to six root canals. A common pulp chamber was most frequent in teeth ≤5 years, but was found even in a tooth of 9 years. A large variety of pulp configurations was observed within 2.5 and 16 years post eruption, but most commonly a separation into mesial and distal pulp compartments was seen. Maxillary cheek teeth showed up to four separate pulp compartments but the frequency of two, three and four pulp compartments was not related to tooth age (P > 0.05). In Triadan 06s, pulp horn 6 was always connected to pulp horns 1 and 3 and root canal I. In Triadan 11s, pulp horns 7 and 8 were present in variable constitutions. Mandibular teeth: A common pulp chamber was present in teeth up to 15 years, but most commonly seen in teeth ≤5 years. A segmented pulp system was found in 72% of the investigated teeth. Segmentation into separate mesial and distal pulp compartments was most commonly present. Pulp horn 4 coalesced either with the mesial pulp horns 1 and 3 or with the distal pulp horns 2 and 5. Conclusions Details of the pulpar anatomy of equine cheek teeth are provided, supporting the continuous advancement in endodontic therapy. Numerous individual configurations of the pulp system were obtained in maxillary cheek teeth, but much less variability was seen in mandibular cheek teeth. PMID:23006500

Aberrant growth of maxillary canine teeth in male babirusa (genus Babyrousa).

PubMed

Macdonald, Alastair A

2018-04-01

A worldwide survey of babirusa skulls curated in museum and private collections located 431 that were from adult males and had retained at least one maxillary canine tooth. Eighty-three of these skulls were identified as exhibiting aberrant maxillary canine tooth growth. Twenty-four of the skulls represented babirusa from Buru and the Sula Islands, and forty-five skulls represented babirusa from Sulawesi and the Togian Islands. The remaining series of fourteen babirusa skulls originally came from zoo animals. Fifteen skulls showed anomalous alveolar and tooth rotation in a median plane. Twenty-nine skulls had maxillary canine teeth that did not grow symmetrically towards the median plane of the cranium. Fourteen skulls showed evidence that the tips of one or both maxillary canine teeth had eroded the nasal bones. Twenty-one skulls had maxillary canine teeth that had eroded the frontal bones. The teeth of two skulls had eroded a parietal bone. One skull had two maxillary canines arising from an adjacent pair of alveoli on the left side of the cranium. Three skulls exhibited alveoli with no formed maxillary canine teeth in them. Analysis suggested that approximately 12% of the adult male babirusa in the wild experience erosion of the cranial bony tissues as a result of maxillary canine tooth growth. There was no skeletal evidence that maxillary canine teeth penetrate the eye. Crown Copyright © 2018. Published by Elsevier Masson SAS. All rights reserved.

Relationship between the maxillary transverse dimension and palatally displaced canines: A cone-beam computed tomographic study.

PubMed

Hong, Wei-Hsin; Radfar, Rebecca; Chung, Chun-Hsi

2015-05-01

To examine the relationship between palatally displaced maxillary canines (PDC) and the maxillary transverse dimension using cone-beam computed tomography (CBCT). Thirty-three patients (11 males and 22 females, mean age 18.2 years) with PDC were matched to 66 patients (22 males and 44 females, mean age 18.1 years) without PDC (control) by gender, age, and posterior occlusion. A CBCT image was taken on all the patients prior to any orthodontic treatment. For each patient the maxillary basal bone widths and interdental widths at the maxillary first molars and first and second premolars were measured on axial and coronal sections of CBCT images. In addition, the presence of permanent tooth agenesis and the widths of maxillary incisors were recorded. Similar maxillary transverse dimensions, both skeletally and dentally, were found between the PDC and control groups. In the PDC group, the number of patients with permanent tooth agenesis was six times higher than in the control group. In addition, the maxillary lateral incisors on PDC-affected sides were smaller than those of control group (P < .05). The maxillary transverse dimension, both skeletally and dentally, had no effect on the occurrence of PDC. The higher prevalence of permanent tooth agenesis was found in the PDC group. Moreover, the mean mesiodistal width of maxillary lateral incisors in the PDC group was significantly smaller than in the control group (P < .05).

Vector alignment in maxillary distraction osteogenesis.

PubMed

Uckan, Sina; Arman, Ayca; Bayram, Burak; Celik, Erkan

2006-09-01

Maxillary distraction osteogenesis is an alternative treatment of cleft patients with severe maxillary hypoplasia. The aim of this paper is to present the combined surgical/orthodontic treatment of a cleft lip and palate patient and to evaluate the maxillary distraction procedure and the distraction vector in high Le Fort I osteotomy.

Camouflage treatment for class III malocclusion combined with traction of an impacted maxillary central incisor.

PubMed

Closs, Luciane Quadrado; Mundstock, Karina Santos; Ribeiro, Darlene Santos; Reston, Eduardo Galia; Silva, Aurelício Novaes

2010-01-01

This case report describes the treatment of a patient with an unerupted maxillary left central incisor, class III malocclusion with crossbite of the maxillary posterior teeth and lateral open bite. Treatment consisted of rapid maxillary expansion followed by anterior space opening, maxillary protraction and traction of the unerupted teeth with a light force system. Favorable results were obtained in terms of correcting incisor position and class III malocclusion. The results achieved remained stable throughout a 4-year retention period.

Micro-Computed Tomography Evaluation of ProTaper Next and BioRace Shaping Outcomes in Maxillary First Molar Curved Canals.

PubMed

Pasqualini, Damiano; Alovisi, Mario; Cemenasco, Andrea; Mancini, Lucia; Paolino, Davide Salvatore; Bianchi, Caterina Chiara; Roggia, Andrea; Scotti, Nicola; Berutti, Elio

2015-10-01

The aim of this micro-computed tomography study was to describe the shaping properties of ProGlider/ProTaper Next (PG/PTN) and ScoutRace/BioRace (SR/BR) nickel-titanium rotary systems. Thirty maxillary first permanent molars were selected. Mesiobuccal canals were randomly assigned (n = 15) to PG/PTN or SR/BR groups. Irrigation was performed with 5% NaOCl and 10% EDTA. Specimens were scanned (voxel size, 9.1 μm) for matching volumes and surface areas and post-treatment analyses. Root canal centering ability, canal geometry enlargement, and thickness of dentinal wall at inner curvature were assessed at apical level and point of maximum curvature. Results were analyzed with 4 one-way analyses of variance. Canal centering ability was superior in PG/PTN (P = .006 at apical level, P = .025 at point of maximum curvature). PG/PTN demonstrated a more conservative increase of canal areas (P = .027 at apical level, P = .038 at point of maximum curvature). Centrifugal increase in canal diameters did not significantly differ between groups (P = .65 at apical level, P = .61 at point of maximum curvature). Inner dentinal wall thickness was less reduced with PG/PTN compared with SR/BR, with no statistical differences (P = .23 at point of maximum curvature, P = .89 at apical level). PG/PTN shaping taper ranged between 6% and 7%. Neither system produced significant shaping errors in curved canals. PG/PTN system showed better preservation of canal anatomy. PTN offset section did not influence final preparation taper. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Morphologic changes of the nasopalatine canal related to dental implantation: a radiologic study in different degrees of absorbed maxillae.

PubMed

Mardinger, Ofer; Namani-Sadan, Noa; Chaushu, Gavriel; Schwartz-Arad, Devorah

2008-09-01

Implant rehabilitation of the edentulous anterior maxilla remains a complex restorative challenge. Intricate preexisting anatomy dictates meticulous and accurate osteotomy planning. With progressive bone loss, the alveolar crest may approach anatomic structures. The nasopalatine nerve and vessels may ultimately emerge from the ridge crest. The radiologic changes of the nasopalatine canal were evaluated in different resorption phases of the premaxilla alveolus with regard to dental implantation. The study consisted of 207 subjects who had maxillary computed tomography scans before dental implantation. The Lekholm and Zarb classification was used to divide images according to the residual bony ridge: Class A (control group) and classes B to E (study group). Anatomic mapping of the nasopalatine canal structure was carried out in both groups. The canal diameter was wider along the degree of ridge resorption from classes A to E in all dimensions, mainly in the palatal opening (P <0.01), middle area (P <0.001), and nasal area. The mean diameter of the enlargement was 1.8 mm, which reached 5.5 +/- 1.08 mm (P <0.01) in type E bone. In the severely resorbed ridges (classes C through E), when the palatal opening was situated on the ridge, it occupied a mean of 35.6% (13% to 58%) of the area devoted to implant placement. Tooth loss was the main reason for ridge resorption (P <0.01). Canal diameter enlargement was greater anteriorly to the ridge and posteriorly to the palatal bone, mainly because of tooth extraction. The atrophy of disuse may influence surrounding structures, similar to the maxillary sinus tendency to expand into surrounding bone mainly after tooth loss.

Maxillary Anterior Segmental Distraction Osteogenesis to Correct Maxillary Deficiencies in a Patient With Cleft Lip and Palate.

PubMed

Kageyama-Iwata, Asuka; Haraguchi, Seiji; Iida, Seiji; Aikawa, Tomonao; Yamashiro, Takashi

2017-07-01

This report describes a case of successful orthodontic treatment using maxillary anterior segmental distraction osteogenesis with an internal maxillary distractor and bilateral sagittal split ramus osteotomy in a girl with cleft lip and palate. A 16-year-old girl with unilateral cleft lip and palate exhibited midface retrusion because of growth inhibition of the maxillary complex and mandibular excess. After the presurgical orthodontic treatment, 6.0-mm advancement of the maxillary anterior segment and 4.0-mm set back of the mandible were performed. After a retention period, the patient's midface convexity was greatly improved and the velopharyngeal competence was preserved without relapse.

Maxillary Hypoplasia With Congenital Oligodontia Treated by Maxillary Distraction Osteogenesis.

PubMed

Mishima, Sayaka; Yamaguchi, Takako; Watanabe, Takuma; Komatani, Toru; Nakao, Kazumasa; Takahashi, Katsu; Bessho, Kazuhisa

2018-02-27

It is known that congenitally missing teeth can often cause differences in craniofacial morphology; however, there are few reported cases of orthognathic surgical treatment for these patients. Herein, the authors report a rare case of maxillary hypoplasia with congenital oligodontia treated by maxillary distraction osteogenesis with internal device. A 17-year-old male presenting with multiple tooth agenesis and maxillary recession was referred to our hospital for orthognathic surgical treatment. Preoperative simulation surgery was performed using Full-Color 3-dimensional salt model. After surgery, improvement in maxillary recession and occlusal stability was observed. This report demonstrates the advantages of the method used herein, which includes reduction in operating time with increase in the safety of the procedure.

[Cone-beam CT evaluation of nasomaxillary complex and upper airway following rapid maxillary expansion].

PubMed

Li, Lei; Qi, Suqing; Wang, Hongwei; Ren, Sufeng; Ban, Jiandong

2015-07-01

To evaluate the naso-maxillary complex width and pharyngeal airway volume changes after rapid maxillary expansion (RME). Thirty-five patients were selected (18 males, 17 females, mean age, 12.1 ± 1.1 years). All patients underwent orthodontic treatment with Hyrax palatal expanders. Cone-beam CT (CBCT) scan was taken before treatment (T0), 16 days (T1) and three months (T3) after RME. Naso-maxillary complex width and pharyngeal airway volume were measured. After treatment the width of piriform aperture and maxillary width were significantly increased compared with that before treatment (P < 0.05). Three months after RME, no statistical difference was found in maxillary width compared with that before treatment. The nasopharyngeal volume significantly increased by 29.9% compared with that before treatment (P < 0.05), and the volume remained relatively stable after three months. RME resulted in a significant increase in the naso-maxillary complex width and nasopharyngeal volume.

[Biomechanical study of internal midface distraction after different types of maxillary osteotomy in patients with cleft lip and palate].

PubMed

Hou, Min; Shi, Guang-Yu; Pu, Li-Chen; Song, Da-Li; Zhang, Xi-Zhong; Liu, Chun-Ming

2009-09-01

To investigate the biomechanical changes of internal midface distraction after different types of maxillary osteotomy in patients with cleft lip and palate (CLP). 3-D finite element (FEM) analysis was used. 3-D models of Le Fort I, II, III osteotomy and soft tissue were established. Based on the new pattern of internal midface distractor, the distraction of maxillary complex was simulated to advance 10 mm anteriorly. The mechanical change was studied. The maxillary complex in CLP were advanced after distraction. Constriction of alveolar crest and palate occurred in Le Fort I osteotomy, but not in Le Fort II and III osteotomy. The maxillary complex was moved anteriorly en bloc after Le Fort III osteotomy, but some degree of rotation of maxillary complex was observed during the distraction after Le Fort I and II osteotomy. In vertical direction, the maxillary complex had more counterclockwise rotation after Le Fort II osteotomy. 3-D FEM analysis can be used for the study of internal distraction. It can reflect the maxillary movement and provide the theory basis for preoperative design.

Airflow and temperature distribution inside the maxillary sinus: a computational fluid dynamics simulation.

PubMed

Zang, Hongrui; Liu, Yingxi; Han, Demin; Zhang, Luo; Wang, Tong; Sun, Xiuzhen; Li, Lifeng

2012-06-01

The airflow velocity and flux in maxillary sinuses were much lower than those in the nasal cavity, and the temperature in maxillary sinuses was much higher than the temperature in the middle meatus. With the increase of maximum diameter of the ostium, the above indices changed little. The purpose of the paper was to investigate, first, the flow and temperature distribution inside normal maxillary sinus in inspiration, and second, flow and temperature alteration with the increase of maximum ostium diameter. Three-dimensional models with nasal cavities and bilateral maxillary sinuses were constructed for computational fluid dynamics analysis. Virtual surgeries were implemented for the maxillary ostium, the maximum diameters of which were 8, 10, 12, and 15 mm, respectively. The finite volume method was used for numerical simulation. The indices of velocity, pressure, vector, and temperature were processed and compared between models. The airflow velocity in maxillary sinuses (average velocity 0.062 m/s) was much lower than that in the middle meatus (average velocity 3.26 m/s). With the increase of ostium diameter, airflow characteristics distributed in the maxillary sinuses changed little. The normal temperature in the maxillary sinus remained almost constant at 34°C and changed little with the increase of ostium diameter.

"Maxillary lateral incisor partial anodontia sequence": a clinical entity with epigenetic origin.

PubMed

Consolaro, Alberto; Cardoso, Maurício Almeida; Consolaro, Renata Bianco

2017-01-01

The relationship between maxillary lateral incisor anodontia and the palatal displacement of unerupted maxillary canines cannot be considered as a multiple tooth abnormality with defined genetic etiology in order to be regarded as a "syndrome". Neither were the involved genes identified and located in the human genome, nor was it presumed on which chromosome the responsible gene would be located. The palatal maxillary canine displacement in cases of partial anodontia of the maxillary lateral incisor is potentially associated with environmental changes caused by its absence in its place of formation and eruption, which would characterize an epigenetic etiology. The lack of the maxillary lateral incisor in the canine region means removing one of the reference guides for the eruptive trajectory of the maxillary canine, which would therefore, not erupt and /or impact on the palate. Consequently, and in sequence, it would lead to malocclusion, maxillary atresia, transposition, prolonged retention of the deciduous canine and resorption in the neighboring teeth. Thus, we can say that we are dealing with a set of anomalies and multiple sequential changes known as sequential development anomalies or, simply, sequence. Once the epigenetics and sequential condition is accepted for this clinical picture, it could be called "Maxillary Lateral Incisor Partial Anodontia Sequence."

“Maxillary lateral incisor partial anodontia sequence”: a clinical entity with epigenetic origin

PubMed Central

Consolaro, Alberto; Cardoso, Maurício Almeida; Consolaro, Renata Bianco

2017-01-01

ABSTRACT The relationship between maxillary lateral incisor anodontia and the palatal displacement of unerupted maxillary canines cannot be considered as a multiple tooth abnormality with defined genetic etiology in order to be regarded as a “syndrome”. Neither were the involved genes identified and located in the human genome, nor was it presumed on which chromosome the responsible gene would be located. The palatal maxillary canine displacement in cases of partial anodontia of the maxillary lateral incisor is potentially associated with environmental changes caused by its absence in its place of formation and eruption, which would characterize an epigenetic etiology. The lack of the maxillary lateral incisor in the canine region means removing one of the reference guides for the eruptive trajectory of the maxillary canine, which would therefore, not erupt and /or impact on the palate. Consequently, and in sequence, it would lead to malocclusion, maxillary atresia, transposition, prolonged retention of the deciduous canine and resorption in the neighboring teeth. Thus, we can say that we are dealing with a set of anomalies and multiple sequential changes known as sequential development anomalies or, simply, sequence. Once the epigenetics and sequential condition is accepted for this clinical picture, it could be called “Maxillary Lateral Incisor Partial Anodontia Sequence.” PMID:29364376

Treatment effects of quad-helix on the eruption pattern of maxillary second molars.

PubMed

Kobayashi, Yoshiki; Shundo, Isao; Endo, Toshiya

2012-07-01

To evaluate the effects of quad-helix treatment on the eruption pattern of maxillary second molars in patients with maxillary incisor crowding. The lateral cephalograms of 40 consecutively treated patients in the early mixed-dentition group (treatment group) were examined in comparison with those of the same number of untreated patients with a similar form of malocclusion (control group). The cephalograms of the treated patients were taken at the start (T0) and at the end (T1) of treatment, and those of the untreated patients were also taken at about the same time as T0 and T1. The mean ages at T0 and T1 in the two groups were about the same. Distal tipping and movement and impeded extrusion of the maxillary first molars were notable in the treatment group compared with the control group. The actual treatment changes with the use of the quad-helix found expression in distal tipping and impeded vertical eruption of maxillary second molars. The more the maxillary first molars were tipped distally and the less the maxillary first molars extruded, the more the vertical eruption of the maxillary second molars was impeded. Quad-helix treatment gives rise to spontaneous distal tipping and impeded vertical eruption of the maxillary second molars.

Anterior maxillary segmental distraction for correction of maxillary hypoplasia and dental crowding in cleft palate patients: a preliminary report.

PubMed

Wang, X-X; Wang, X; Li, Z-L; Yi, B; Liang, C; Jia, Y-L; Zou, B-S

2009-12-01

To evaluate the feasibility of anterior maxillary segmental distraction (AMSD) to correct maxillary hypoplasia and severe dental crowding in cleft lip and palate (CLP) patients, 7 patients (average age 16.4 years) with maxillary hypoplasia, shortened maxillary dental arch length and severe anterior dental crowding secondary to CLP were selected for this study. After anterior maxillary segmental osteotomy, 3 patients were treated using bilateral internal distraction devices, and 4 patients were treated using rigid external distraction devices. Photographs and radiographs were taken to review the improvement in facial profile and occlusion after distraction. An average 10.25 mm anterior maxillary advancement was obtained in all patients after 10-23 days of distraction and 9-16 weeks of consolidation. The sella-nasion-point A (SNA) angle increased from 69.5 degrees to 79.6 degrees. Midface convexity was greatly improved and velopharyngeal competence was preserved. The maxillary dental arch length was greatly increased by 10.1 mm (P<0.01). Dental crowding and malocclusion were corrected by orthodontic treatment. These results show that AMSD can effectively correct the hypoplastic maxilla and severe dental crowding associated with CLP by increasing the midface convexity and dental arch length while preserving velopharyngeal function, and dental crowding can be corrected without requiring tooth extraction.

Dimensional changes of upper airway after rapid maxillary expansion: a prospective cone-beam computed tomography study.

PubMed

Chang, Yoon; Koenig, Lisa J; Pruszynski, Jessica E; Bradley, Thomas G; Bosio, Jose A; Liu, Dawei

2013-04-01

The aim of this prospective study was to use cone-beam computed tomography to assess the dimensional changes of the upper airway in orthodontic patients with maxillary constriction treated by rapid maxillary expansion. Fourteen orthodontic patients (mean age, 12.9 years; range, 9.7-16 years) were recruited. The patients with posterior crossbite and constricted maxilla were treated with rapid maxillary expansion as the initial part of their comprehensive orthodontic treatments. Before and after rapid maxillary expansion cone-beam computed tomography scans were taken to measure the retropalatal and retroglossal airway changes in terms of volume, and sagittal and cross-sectional areas. The transverse expansions by rapid maxillary expansion were assessed between the midlingual alveolar bone plates at the maxillary first molar and first premolar levels. The measurements of the before and after rapid maxillary expansion scans were compared by using paired t tests with the Bonferroni adjustment for multiple comparisons. After rapid maxillary expansion, significant and equal amounts of 4.8 mm of expansion were observed at the first molar (P = 0.0000) and the first premolar (P = 0.0000) levels. The width increase at the first premolar level (20.0%) was significantly greater than that at the first molar level (15.0%) (P = 0.035). As the primary outcome variable, the cross-sectional airway measured from the posterior nasal spine to basion level was the only parameter showing a significant increase of 99.4 mm(2) (59.6%) after rapid maxillary expansion (P = 0.0004). These results confirm the findings of previous studies of the effect of rapid maxillary expansion on the maxilla. Additionally, we found that only the cross-sectional area of the upper airway at the posterior nasal spine to basion level significantly gains a moderate increase after rapid maxillary expansion. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

[Comparison of treatment outcomes in patients with maxillary dentoalveolar protrusion by applying different anchorage methods: a three-dimensional model study].

PubMed

Ning, Ma; Weiran, Li

2015-02-01

This study aims to compare the treatment outcomes in patients with maxillary dentoalveolar protrusion by applying different anchorage methods via three-dimensional model measurement. A total of 46 patients with maxillary dentoalveolar protrusion treated with bilateral maxillary first premolar extractions and high anchorage were selected. The subjects were randomly divided into three groups according to the type of anchorage applied, which included implant, extraoral, and Nance arch anchorages. The maxillary dental models were made before treatment and after space closure of maxilla. The movements of the maxillary central incisors and first molars were measured via a three-dimensional model measurement, and the amounts of movement were compared among the three groups. The sagittal lingual movements of the maxillary central incisors were (-6.661 ± 1.328), (-5.939 ± 1.806), and (-5.788 ± 2.009) mm for the implant, extraoral, and Nance arch anchorage groups, respectively, with no significant difference among the three groups (P = 0.121). The corresponding vertical movements of the maxillary central incisors were (0.129 ± 1.815) mm intrusion, and (-2.162 ± 2.026), (-2.623 ± 1.776) mm extrusion. Significant difference was found between the implant anchorage group and the other groups (P < 0.05). The corresponding sagittal mesial movements of the maxillary first molars were (0.608 ± 1.045), (1.445 ± 1.462), and (1.503 ± 0.945) mm. The corresponding vertical movements of the maxillary first molars were (0.720 ± 0.805) mm intrusion, (0.076 ± 0.986) mm intrusion, and (-0.072 ± 0.690) mm extrusion. Significant difference was found between the implant anchorage group and the other two groups (P < 0.05). In the transverse direction, the first molars all moved lingually with no significant difference among the three groups (P > 0.05). Implant anchorage may be superior in the vertical control of the maxillary incisors and in the sagittal, as well as in the vertical control of the maxillary molars, compared with the traditional anchorages during the treatment of patients with maxillary dentoalveolar protrusion.

Generation and evaluation of 3D digital casts of maxillary defects based on multisource data registration: A pilot clinical study.

PubMed

Ye, Hongqiang; Ma, Qijun; Hou, Yuezhong; Li, Man; Zhou, Yongsheng

2017-12-01

Digital techniques are not clinically applied for 1-piece maxillary prostheses containing an obturator and removable partial denture retained by the remaining teeth because of the difficulty in obtaining sufficiently accurate 3-dimensional (3D) images. The purpose of this pilot clinical study was to generate 3D digital casts of maxillary defects, including the defective region and the maxillary dentition, based on multisource data registration and to evaluate their effectiveness. Twelve participants with maxillary defects were selected. The maxillofacial region was scanned with spiral computer tomography (CT), and the maxillary arch and palate were scanned using an intraoral optical scanner. The 3D images from the CT and intraoral scanner were registered and merged to form a 3D digital cast of the maxillary defect containing the anatomic structures needed for the maxillary prosthesis. This included the defect cavity, maxillary dentition, and palate. Traditional silicone impressions were also made, and stone casts were poured. The accuracy of the digital cast in comparison with that of the stone cast was evaluated by measuring the distance between 4 anatomic landmarks. Differences and consistencies were assessed using paired Student t tests and the intraclass correlation coefficient (ICC). In 3 participants, physical resin casts were produced by rapid prototyping from digital casts. Based on the resin casts, maxillary prostheses were fabricated by using conventional methods and then evaluated in the participants to assess the clinical applicability of the digital casts. Digital casts of the maxillary defects were generated and contained all the anatomic details needed for the maxillary prosthesis. Comparing the digital and stone casts, a paired Student t test indicated that differences in the linear distances between landmarks were not statistically significant (P>.05). High ICC values (0.977 to 0.998) for the interlandmark distances further indicated the high degree of consistency between the digital and stone casts. The maxillary prostheses showed good clinical effectiveness, indicating that the corresponding digital casts met the requirements for clinical application. Based on multisource data from spiral CT and the intraoral scanner, 3D digital casts of maxillary defects were generated using the registration technique. These casts were consistent with conventional stone casts in terms of accuracy and were suitable for clinical use. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Dentoskeletal features in individuals with ectopic eruption of the permanent maxillary first molar

PubMed Central

Rozzi, Matteo; Cardoni, Giulia; Ricchiuti, Maria Rosaria; Cozza, Paola

2015-01-01

Objective The aim of the study was to analyze the prevalence and distribution of ectopic eruption of the permanent maxillary first molar (EEM) in individuals scheduled for orthodontic treatment and to investigate the association of EEM with dental characteristics, maxillary skeletal features, crowding, and other dental anomalies. Methods A total of 1,317 individuals were included and randomly divided into two groups. The first 265 subjects were included as controls, while the remaining 1,052 subjects included the sample from which the final experimental EEM group was derived. The mesiodistal (M-D) crown width of the deciduous maxillary second molar and permanent maxillary first molar, maxillary arch length (A-PML), maxillomandibular transverse skeletal relationships (anterior and posterior transverse interarch discrepancies, ATID and PTID), maxillary and mandibular tooth crowding, and the presence of dental anomalies were recorded for each subject, and the statistical significance of differences in these parameters between the EEM and control groups was determined using independent sample t-tests. Chi-square tests were used to compare the prevalence of other dental anomalies between the two groups. Results The prevalence of maxillary EEM was 2.5%. The M-D crown widths, ATID and PTID, and tooth crowding were significantly greater, while A-PML was significantly smaller, in the EEM group than in the control group. Only two subjects showed an association between EEM and maxillary lateral incisor anomalies, which included agenesis in one and microdontia in the other. Conclusions EEM may be a risk factor for maxillary arch constriction and severe tooth crowding. PMID:26258065

An Analysis of Maxillary Anterior Teeth Dimensions for the Existence of Golden Proportion: Clinical Study.

PubMed

Sandeep, Nalla; Satwalekar, Parth; Srinivas, Siva; Reddy, Chandra Sekhar; Reddy, G Ramaswamy; Reddy, B Anantha

2015-09-01

Appearance of the face is a great concern to everyone, as it is a significant part of self-image. The study analyzed the clinical crown dimensions of the maxillary anterior teeth with respect to their apparent mesiodistal widths, width-to-height ratio to determine whether golden proportion existed among the South Indian population. A total of 240 dentulous subjects were chosen for the study (120 males and 120 females) age ranging between 18 and 28 years. Full face and anterior teeth images of the subjects were made on specially designed device resembling a face-bow, mounted onto the wall under a standard light source. The width and height of the maxillary central incisors were measured on the stone casts using a digital caliper. The mean perceived maxillary lateral incisor to central incisor width ratio was 0.67 in males and 0.703 in females. The mean perceived maxillary canine to lateral incisor width ratio was 0.744 in males and 0.714 in females. The mean width-to-height ratio of the maxillary central incisor was 79.49% in males and 79.197% in females. The golden proportion was not found between perceived mesiodistal widths of maxillary central and lateral incisors and nor between perceived mesiodistal widths of maxillary lateral incisors and canines. In the majority of subjects, the width-to-height ratio of maxillary central incisor was within 75-80%. There are no statistically significant differences in maxillary anterior teeth proportions between males and females. The results may serve as guidelines for treatment planning in restorative dentistry and periodontal surgery.

Comparative study of different osteotomy modalities in maxillary distraction osteogenesis for cleft lip and palate.

PubMed

Yu, Hongbo; Wang, Xudong; Fang, Bing; Shen, Steve Guofang

2012-11-01

Conventional maxillary distraction osteogenesis and anterior maxillary segmental distraction were applied in the treatment of severe maxillary hypoplasia secondary to cleft clip and palate. The aim of the present study was to compare the difference between these 2 osteotomy modalities used for rigid external distraction. Ten patients with severe maxillary hypoplasia secondary to CLP were enrolled in our study. They were randomly divided into 2 groups. Conventional maxillary distraction osteogenesis was performed in 5 patients and anterior maxillary segmental distraction in 5 patients. The preoperative and postoperative lateral cephalograms were compared, and cephalometric analysis was performed. The independent sample t test was used to evaluate the differences between the 2 groups. All patients healed uneventfully, and the maxillae moved forward satisfactorily. The sella-nasion-point A angles, nasion-point A-Frankfort horizontal plane angles, overjets, and 0-meridian to subnasale distances had increased significantly after distraction osteogenesis. Significant differences were found in the changes in palatal length between the 2 groups (P < .05). A mean increase of 7.50 mm in palatal length was found in the anterior maxillary segmental distraction group. No significant difference in the changes in palatopharyngeal depth or soft palatal length was found. With the ability of increasing the palatal and arch length, avoiding changes in palatopharyngeal depth, and preserving palatopharyngeal closure function, anterior maxillary segmental distraction has great value in the treatment of maxillary hypoplasia secondary to CLP. It is a promising and valuable technique in this potentially complicated procedure. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Maxillary growth after the use of protraction head gear in conjunction with presurgical orthopedics and gingivoperiosteoplasty for complete bilateral cleft lip and alveolus patients.

PubMed

Kobayashi, Shinji; Hirakawa, Takashi; Fukawa, Toshihiko; Maegawa, Jiro

2013-09-01

Maxillary development is often inadequate in bilateral cleft patients. The use of presurgical orthopedics (PSO) and gingivoperiosteoplasty (GPP) may promote bone formation at the alveolar cleft, but can also have detrimental effects on maxillary development. Our objective was to investigate the effect of PSO and GPP on maxillary development in bilateral cleft lip and alveolus (BCLA) patients. We had 3 complete BCLA patients who had received PSO. All patients underwent cheiloplasty and GPP simultaneously. At 4 years, maxillary protraction head gear was used as part of the protocol. They were evaluated by cephalometric analysis at 4 and 8 years of age, and by CT imaging at 5 years of age. At 4 years of age, patients with all BCLA had anterior crossbite of deciduous central incisors. As a result of maxillary protraction, jaw development at 8 years was good. Among all patients, only one showed bone formation at the alveolar cleft sufficient to avoid alveolar bone grafting (ABG). All patients presented anterior crossbite in the premaxillary region, but had good maxillary growth at 8 years old as a result of maxillary protraction. The combination of PSO and GPP can potentially eliminate the need for ABG and does not significantly retard maxillary development. PSO with GPP and protraction head gear may be an option, but long-term growth is not known.

Infratemporal fossa fat enlargement in chronic maxillary atelectasis.

PubMed

Kohn, Jocelyne C; Rootman, Daniel B; Xu, Dongdong; Goldberg, Robert A

2013-08-01

To describe the radiographic findings in chronic maxillary atelectasis and analyse the volume changes of the affected maxillary sinus, orbit, nasal vault and infratemporal fossa. Case series of all patients with diagnosis of chronic maxillary atelectasis presenting between January 2000 and August 2012 who underwent full oculoplastic and orbital evaluation including standardised photography and CT or MRI. Two-dimensional imaging features and volumetric changes were assessed. Affected and unaffected sides were compared. Demographic data, clinical presentation, Hertel measurements, photographic and radiological findings were analysed. 22 patients (64% men) met the inclusion criteria. Mean relative enophthalmos was 2.1 mm and mean hypoglobus was 1.8 mm. The most common radiographic findings were sinus opacification (91%), uncinate process retraction/middle meatus increase (91%), orbit enlargement (100%), ipsilateral septum deviation (64%) and infratemporal fossa fat enlargement (100%). Infratemporal fossa fat area and volume were significantly larger in the affected side (p<0.01). Additionally, ipsilateral orbit (p<0.01) and nasal vault volume (p<0.01) were similarly increased. Maxillary sinus volume correlated significantly only with infratemporal fossa fat enlargement (p<0.05). There is a significant increase in the infratemporal fossa fat, nasal and orbital volume corresponding to a decrease in maxillary sinus size in chronic maxillary atelectasis. Chronic maxillary atelectasis is associated with redistribution of volume between the maxillary sinus and the surrounding infratemporal fossa, orbit and nasal cavity.

Maxillary sinus volume in patients with impacted canines.

PubMed

Oz, Aslihan Zeynep; Oz, Abdullah Alper; El, Hakan; Palomo, Juan Martin

2017-01-01

To evaluate the maxillary sinus volumes in unilaterally impacted canine patients and to compare the volumetric changes that occur after the eruption of canines to the dental arch using cone beam computed tomography (CBCT). Pre- (T0) and posttreatment (T1) CBCT records of 30 patients were used to calculate maxillary sinus volumes between the impacted and erupted canine sides. The InVivoDental 5.0 program was used to measure the volume of the maxillary sinuses. The distance from impacted canine cusp tip to the target point on the palatal plane was also measured. Right maxillary sinus volume was statistically significantly smaller compared to that of the left maxillary sinus when the canine was impacted on the right side at T0. According to the T1 measurements there was no significant difference between the mean volumes of the impaction side and the contralateral side. The distance from the canine tip to its target point on the palatal plane were 17.17 mm, and the distance from the tip to the target point was 15.14 mm for the left- and right-side impacted canines, respectively, and there was a significant difference between the mean amount of change of both sides of maxillary sinuses after treatment of impacted canines. Orthodontic treatment of impacted canines created a significant increase in maxillary sinus volume when the impacted canines were closer with respect to the maxillary sinus.

Maxillary distraction osteogenesis in cleft lip and palate patients with skeletal anchorage.

PubMed

Minami, Katsuhiro; Mori, Yoshihide; Tae-Geon, Kwon; Shimizu, Hidetaka; Ohtani, Miyuki; Yura, Yoshiaki

2007-03-01

Maxillary distraction osteogenesis with the rigid external distraction (RED) system has been used to treat cleft lip and palate (CLP) patients with severe maxillary hypoplasia. We introduce maxillary distraction osteogenesis for CLP patients with skeletal anchorage adapted on a stereolithographic model. Six maxillary deficiency CLP patients treated according to our CLP treatment protocol had undergone maxillary distraction osteogenesis. In all patients, computed tomography (CT) images were recorded preoperatively, and the data were transferred to a workstation. Three-dimensional skeletal structures were reconstructed with CT data sets, and a stereolithographic model was produced. On the stereolithographic model, miniplates were adapted to the surface of maxilla beside aperture piriforms. The operation performed involved a high Le Fort I osteotomy with pterygomaxillary disjunction. Miniplates were fixed to the maxillary segment with three or four screws and used for anchorage of the RED system. Retraction of the maxillary segment was initiated after 1 week. The accuracy of the stereolithographic models was enough to adapt the miniplates so that there was no need to readjust the plates during surgery. Postoperative cephalometric analysis showed that the direction of the retraction was almost parallel to the palatal plane, and dental compensation did not occur. We performed maxillary distraction osteogenesis with skeletal anchorage adapted on the stereolithographic models. Excellent esthetic outcome and skeletal advancement were achieved without dentoalveolar compensations.

Dental and maxillofacial characteristics of six Japanese individuals with ectrodactyly-ectodermal dysplasia-clefting syndrome.

PubMed

Okamura, Erika; Suda, Naoto; Baba, Yoshiyuki; Fukuoka, Hiroki; Ogawa, Takuya; Ohkuma, Mizue; Ahiko, Nozomi; Yasue, Akihiro; Tengan, Toshimoto; Shiga, Momotoshi; Tsuji, Michiko; Moriyama, Keiji

2013-03-01

Objective : Ectrodactyly-ectodermal dysplasia-clefting syndrome is a congenital anomaly characterized by ectodermal dysplasia, ectrodactyly, cleft lip and palate, and lacrimal duct anomalies. Because this syndrome is frequently accompanied by a congenital lack of teeth, narrow palate, and malocclusion, comprehensive orthodontic intervention is required. Design : To highlight the specific dental and maxillofacial characteristics of ectrodactyly-ectodermal dysplasia-clefting syndrome, six Japanese individuals diagnosed with the syndrome are described here. Patients : The subjects consisted of two boys and four girls (age range, 6.0 to 13.9 years) diagnosed with ectrodactyly-ectodermal dysplasia-clefting syndrome by medical and dental specialists. Their conditions included ectodermal dysplasia (hypodontia, microdontia, enamel hypoplasia, and abnormalities in hair and nails), cleft lip and/or palate, and ectrodactyly. Cephalograms, panoramic x-rays, and dental casts were taken; systemic complications were recorded at the first visit to our dental hospital. Results : All individuals had severe oligodontia with 9 to 18 missing teeth. The missing teeth were mainly maxillary and mandibular incisors and second bicuspids, arranged in a symmetrical manner. Cephalometric analysis showed retruded and short maxilla due to cleft lip and/or palate. It is interesting that all individuals showed a characteristically shaped mandibular symphysis with a retruded point B. It is likely that this unusual symphyseal morphology is due to the lack of mandibular incisors. Conclusions : This study demonstrates the presence of severe oligodontia in the incisal and premolar regions and describes a characteristic maxillary and mandibular structure in Japanese individuals with ectrodactyly-ectodermal dysplasia-clefting syndrome.

Patient with oligodontia treated with a miniscrew for unilateral mesial movement of the maxillary molars and alignment of an impacted third molar.

PubMed

Maeda, Aya; Sakoguchi, Yoko; Miyawaki, Shouichi

2013-09-01

This report describes the treatment of a 20-year-old woman with a dental midline deviation and 7 congenitally missing premolars. She had retained a maxillary right deciduous canine and 4 deciduous second molars, and she had an impacted maxillary right third molar. The maxillary right deciduous second molar was extracted, and the space was nearly closed by mesial movement of the maxillary right molars using an edgewise appliance and a miniscrew for absolute anchorage. The miniscrew was removed, and the extraction space of the maxillary right deciduous canine was closed, correcting the dental midline deviation. After the mesial movement of the maxillary right molars, the impacted right third molar was aligned. To prevent root resorption, the retained left deciduous second molars were not aligned by the edgewise appliance. The occlusal contact area and the maximum occlusal force increased over the 2 years of retention. The miniscrew was useful for absolute anchorage for unilateral mesial movement of the maxillary molars and for the creation of eruption space and alignment of the impacted third molar in a patient with oligodontia. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Transpalatal distraction for the management of maxillary constriction in pediatric patients.

PubMed

Adolphs, Nicolai; Ernst, Nicole; Hoffmeister, Bodo; Raguse, Jan-Dirk

2015-01-01

The management of severe maxillary constriction can be challenging. For that purpose surgically assisted maxillary expansion by transpalatal distraction (TPD) can typically be recommended after skeletal maturity. However in selected cases bone borne transpalatal distraction devices can contribute to improve maxillary constriction considerably earlier already during mixed dentition. To assess the possibility of bone borne transpalatal distraction in pediatric patients. Clinical paper. Since 2010 TPD has been applied to six pediatric patients during mixed dentition when severe maxillary constriction was present and conventional orthodontic widening has already failed. Individually selected devices (Surgitec, Belgium) were inserted in general anaesthesia and distraction was performed according to well known parameters. Maxillary constriction could be improved in all six patients without any drawbacks by bone borne devices during mixed dentition. Skeletal conditions were obviously improved for subsequent orthodontic or orthognathic therapy without functional impairment. Follow-up is up to 36 months after device removal. Transpalatal Distraction is recommendable in selected pediatric patients if massive growth disturbance is present or has to be expected. TPD allows for individually adapted maxillary expansion by selection and positioning of appropriate devices in combination with intraoperative testing of maxillary movements and controlled bone removal.

Changes in speech following maxillary distraction osteogenesis.

PubMed

Guyette, T W; Polley, J W; Figueroa, A; Smith, B E

2001-05-01

The purpose of this study was to describe changes in articulation and velopharyngeal function following maxillary distraction osteogenesis. This is a descriptive, post hoc clinical report comparing the performance of patients before and after maxillary distraction. The independent variable was maxillary distraction while the dependent variables were resonance, articulation errors, and velopharyngeal function. The data were collected at a tertiary health care center in Chicago. The data from pre- and postoperative evaluations of 18 maxillary distraction patients were used. The outcome measures were severity of hypernasality and hyponasality, velopharyngeal orifice size as estimated using the pressure-flow technique, and number and type of articulation errors. At the long-term follow-up, 16.7% exhibited a significant increase in hypernasality. Seventy-five percent of patients with preoperative hyponasality experienced improved nasal resonance. Articulation improved in 67% of patients by the 1-year follow-up. In a predominately cleft palate population, the risk for velopharyngeal insufficiency following maxillary distraction is similar to the risk observed in Le Fort I maxillary advancement. Patients being considered for maxillary distraction surgery should receive pre- and postoperative speech evaluations and be counseled about risks for changes in their speech.

Distalization of maxillary arch and correction of Class II with mini-implants: A report of two cases

PubMed Central

Tekale, Pawankumar Dnyandeo; Vakil, Ketan K.; Vakil, Jeegar K.; Gore, Ketan A.

2015-01-01

This article reports the successful use of mini-screws in the maxilla to treat two patients of age 21-year and 17-year-old girls. Both the patients had a skeletal Class II malocclusion with protrusive maxillary teeth and angels Class II mal-occlusion. Temporary anchorage devices (TADs) in the posterior dental region between maxillary second premolar and maxillary first molar teeth on both sides were used as anchorage for the retraction and intrusion of her maxillary anterior teeth. Those appliances, combined with a compensatory curved maxillary archwire, eliminated spacing, deep bite, forwardly placed and proclined upper front teeth and the protrusive profile, corrected the molar relationship from Class II to Class I. With no extra TADs in the anterior region for intrusion, the treatment was workable and simple. The patient received a satisfactory occlusion and an attractive smile. This technique requires minimal compliance and is particularly useful for correcting Class II patients with protrusive maxillary front teeth and dental deep bite. PMID:26097360

Jagged1 is essential for osteoblast development during maxillary ossification

PubMed Central

Hill, Cynthia R.; Yuasa, Masato; Schoenecker, Jonathan; Goudy, Steven L.

2015-01-01

Maxillary hypoplasia occurs due to insufficient maxillary intramembranous ossification, leading to poor dental occlusion, respiratory obstruction and cosmetic deformities. Conditional deletion of Jagged1 (Jag1) in cranial neural crest (CNC) cells using Wnt1-cre; Jagged1f/f (Jag1CKO) led to maxillary hypoplasia characterized by intrinsic differences in bone morphology and density using μCT evaluation. Jag1CKO maxillas had altered collagen deposition, delayed ossification, and reduced expression of early and late determinants of osteoblast development during maxillary ossification. In vitro bone cultures on Jag1CKO mouse embryonic maxillary mesenchymal (MEMM) cells demonstrated decreased mineralization that was also associated with diminished induction of osteoblast determinants. BMP receptor expression was dysregulated in the Jag1CKO MEMM cells suggesting that these cells were unable to respond to BMP-induced differentiation. JAG1-Fc rescued in vitro mineralization and osteoblast gene expression changes. These data suggest that JAG1 signaling in CNC-derived MEMM cells is required for osteoblast development and differentiation during maxillary ossification. PMID:24491691

Sliding mechanics with microscrew implant anchorage.

PubMed

Park, Hyo-Sang; Kwon, Tae-Geon

2004-10-01

Three cases are illustrated. One was treated with maxillary microscrew implants, another with mandibular microscrew implants, and the third with both maxillary and mandibular microscrew implants. With the maxillary microscrew implants, the maxillary anterior teeth were retracted bodily with a slight intrusion and all the premolar extraction space was closed without loss of anchorage. Furthermore, the maxillary posterior teeth showed distal movement. The mandibular microscrew implants controlled the vertical position of the mandibular posterior teeth and played an important role in improving the facial profile. The efficacy of sliding mechanics with microscrew implant anchorage on the treatment of skeletal Class II malocclusion is also discussed.

Management of Cleft Maxillary Hypoplasia with Anterior Maxillary Distraction: Our Experience.

PubMed

Chacko, Tojan; Vinod, Sankar; Mani, Varghese; George, Arun; Sivaprasad, K K

2014-12-01

Maxillary hypoplasia is a common developmental problem in cleft lip and palate deformities. Since 1970s these deformities have traditionally been corrected by means of orthognathic surgery. Management of skeletal deformities in the maxillofacial region has been an important challenge for maxillofacial surgeons and orthodontists. Distraction osteogenesis is a surgical technique that uses body's own repairing mechanisms for optimal reconstruction of the tissues. We present four cases of anterior maxillary distraction osteogenesis with tooth borne distraction device-Hyrax, which were analyzed retrospectively for the efficacy of the tooth borne device-Hyrax and skeletal stability of distracted anterior maxillary segment.

Recurrent keratocystic odontogenic tumor of right maxillary sinus involving the right infraorbital rim.

PubMed

Maruthamuthu, Karthikeyan; Vasupradha, G; Dineshshankar, Janardhanam; Balaji, Abishek Rajaram

2017-01-01

Keratocystic odontogenic tumor (KCOT) is a benign odontogenic tumor with an aggressive behavior and high recurrence rate. The most common site of predilection is the posterior mandible. In contrast, KCOTs occurring in the maxillary region are relatively rare. However, the maxillary involvement poses a greater and increased threat, due to proximity to vital structures such as maxillary sinus, orbital floor, and infratemporal fossa. This report presents such a case of KCOT involving the maxillary sinus eroding the floor of the orbit and provides an account of the factors that need to be considered during management.

Maxillary canine impactions related to impacted central incisors: two case reports.

PubMed

Bayram, Mehmet; Ozer, Mete; Sener, Ismail

2007-09-01

The purpose of this case report is to describe the combined surgical and orthodontic treatment of two cases with an impacted maxillary central incisor and canine in the same quadrant and to discuss the causal relationship between them. The most common causes of canine impactions are usually the result of one or more factors such as a long path of eruption, tooth size-arch length discrepancies, abnormal position of the tooth bud, prolonged retention or early loss of the deciduous canine, trauma, the presence of an alveolar cleft, ankylosis, cystic or neoplastic formation, dilaceration of the root, supernumerary teeth, and odontomas. Although impaction of the maxillary central incisor is almost as prevalent as impacted canines its etiology is different. The principal factors involved in causing the anomaly are supernumerary teeth, odontomas, and trauma. Case #1: A 10.5-year-old girl in the early mixed dentition stage presented with a chief complaint of the appearance of her anterior teeth. She had a Class I skeletal pattern and a history of trauma to the maxillary central incisors at age five with premature exfoliation. Radiographs revealed an impacted upper right central incisor in the region of the nasal floor, delayed eruption of the maxillary permanent central incisor, and the adjacent lateral incisor was inclined toward the edentulous space. Treatment was done in two stages consisting of surgical exposure and traction of the impacted central incisor and fixed orthodontic treatment. Case #2: An 11.5-year-old girl presented for orthodontic treatment with the chief complaint of an unerupted tooth and the appearance of her upper anterior teeth. She was in the late mixed dentition period with a Class III skeletal pattern along with an anterior cross-bite with some maxillary transverse deficiency. The maxillary right canine and central incisor were absent, but the maxillary right deciduous canine was still present. Treatment included arch expansion followed by surgical exposure and traction of the impacted teeth and fixed orthodontic treatment. This case report provides some evidence of a significant environmental influence of an impacted maxillary central incisor on the path of eruption of the ipsilateral maxillary canine. When an impacted maxillary central incisor exists, the maxillary lateral incisor's root might be positioned distally into the path of eruption of the maxillary canine preventing its normal eruption. Ongoing assessment and early intervention might help to prevent such adverse situations from occurring.

Maxillary sinus floor extension and posterior tooth inclination in adolescent patients with Class II Division 1 malocclusion treated with maxillary first molar extractions.

PubMed

Livas, Christos; Halazonetis, Demetrios J; Booij, Johan Willem; Pandis, Nikolaos; Tu, Yu-Kang; Katsaros, Christos

2013-04-01

Our objective was to investigate potential associations between maxillary sinus floor extension and inclination of maxillary second premolars and second molars in patients with Class II Division 1 malocclusion whose orthodontic treatment included maxillary first molar extractions. The records of 37 patients (18 boys, 19 girls; mean age, 13.2 years; SD, 1.62 years) treated between 1998 and 2004 by 1 orthodontist with full Begg appliances were used in this study. Inclusion criteria were white patients with Class II Division 1 malocclusion, sagittal overjet of ≥4 mm, treatment plan including extraction of the maxillary first permanent molars, no missing teeth, and no agenesis. Maxillary posterior tooth inclination and lower maxillary sinus area in relation to the palatal plane were measured on lateral cephalograms at 3 time points: at the start and end of treatment, and on average 2.5 years posttreatment. Data were analyzed for the second premolar and second molar inclinations by using mixed linear models. The analysis showed that the second molar inclination angle decreased by 7° after orthodontic treatment, compared with pretreatment values, and by 11.5° at the latest follow-up, compared with pretreatment. There was evidence that maxillary sinus volume was negatively correlated with second molar inclination angle; the greater the volume, the smaller the inclination angle. For premolars, inclination increased by 15.4° after orthodontic treatment compared with pretreatment, and by 8.1° at the latest follow-up compared with baseline. The volume of the maxillary sinus was not associated with premolar inclination. We found evidence of an association between maxillary second molar inclination and surface area of the lower sinus in patients treated with maxillary first molar extractions. Clinicians who undertake such an extraction scheme in Class II patients should be aware of this potential association and consider appropriate biomechanics to control root uprighting. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Plexiform schwannoma: an unusual clitoral mass.

PubMed

Sammarco, Anne G; Abualnadi, Noor M; Andraska, Elizabeth A; Tracy, Paige V; Berger, Mitchell B; Haefner, Hope K

2017-03-01

Acquired clitoral enlargement is a rare condition resulting from a variety of etiologies, including tumors and excess androgens. Few cases of nonmalignant schwannoma, a benign tumor of the peripheral nerve sheath, have been reported in the literature as causes of clitoral enlargement in patients without known neurofibromatosis. These painless, slow-growing tumors rarely recur once excised. We present the initial investigation of a patient with a large clitoral schwannoma and subsequent treatment with partial vulvectomy. The workup, including advanced pelvic imaging for diagnosis and surgical planning, as well as removal of the clitoral tumor with preservation of functional tissue and restoration of normal vulvar anatomy despite a large excision, is demonstrated. Copyright © 2016 Elsevier Inc. All rights reserved.

Premenarchal, recurrent vaginal discharge associated with an incomplete obstructing longitudinal vaginal septum.

PubMed

Hansen, Keith A; DeWitt, Jason

2005-12-01

To describe an unusual, premenarchal presentation of an obstructive vaginal anomaly. Case Report. University Medical Center. Premenarchal subject Vaginogram, vaginal septum resection. Vaginal septum resection with resolution of vaginal discharge. This case demonstrates some of the typical features of uterus didelphys bicollis with incomplete obstructing hemivagina, but had a unique presentation with premenarchal, recurrent vaginal discharge. Typically, patients with an obstructing mullerian anomaly present after menarche with pelvic pain and a mass. The vaginogram assists in the preoperative definition of abnormal anatomy which allows the surgeon to develop the most appropriate surgical approach. Resection of this incompletely obstructing vaginal septum resulted in resolution of the recurrent vaginal discharge.

A case report of esophageal perforation: Complication of nasogastric tube placement

PubMed Central

Isik, Arda; Firat, Deniz; Peker, Kemal; Sayar, Ilyas; Idiz, Oguz; Soytürk, Mehmet

2014-01-01

Patient: Male, 70 Final Diagnosis: Esophageal perforation Symptoms: Abdominal pain • nausea • vomiting Medication: — Clinical Procedure: — Specialty: Surgery Objective: Unusual clinical course Background: Esophageal perforation is a well-defined and severe clinical condition. There are several etiologies of esophagus perforation. Case Report: We report the case of a 70-year-old Caucasian man who underwent an emergency cholecystectomy due to acute cholecystitis. Two days after surgery, his condition deteriorated. Thorax computerized tomography revealed an esophageal perforation. Conclusions: Esophageal perforation due to nasogastric application is relatively rare but the consequences are potentially serious. The anatomy of the upper gastrointestinal system should be understood by all healthcare professionals involved in the treatment. PMID:24803977

Incadendron : a new genus of Euphorbiaceae tribe Hippomaneae from the sub-Andean cordilleras of Ecuador and Peru

PubMed Central

Wurdack, Kenneth J.; Farfan-Rios, William

2017-01-01

Abstract Incadendron esseri K.Wurdack & Farfan, gen. & sp. nov., from the wet sub-Andean cordilleras of Ecuador (Cordillera del Cóndor) and Peru (Cusco, Oxapampa) is described and illustrated. This recently discovered large canopy tree with a narrow elevational range presents an unusual combination of rare morphological characters in Hippomaneae including mucilage-secreting sheathing stipules, conduplicate ptyxis, and large, woody fruits. The broader significance of these characters in Hippomaneae is discussed. The morphology and anatomy of Incadendron were investigated, highlighting its fruit similarities with Guiana Shield endemic Senefelderopsis, and the systematics value of ptyxis variation, which remains poorly studied for the family. PMID:29033661

[Finite element study of maxillary Le Fort-I osteotomy with rigid internal fixation].

PubMed

Zhou, Jian; Sun, Geng-Lin; Wu, Wei; Xu, Chong-Tao; Wang, Peng-Lin

2010-05-01

To study the biomechanical characteristic of maxillary Le fort- I osteotomy with rigid internal fixation (RIF) , so as to choose best fixation method. The 3-dimensional finite element models of maxillary Le Fort-I osteotomy with 9 kinds of RIF methods were established. Then the models were divided into three groups to calculate the stress distribution of the maxilla and the displacement of bone segment under 3 kinds of occlusion condition. The fixation stability of the different RIF methods was evaluated. Under the incisor occlusion condition, the stress of the cranio maxillary complex transmits mainly along the nasal-maxillary buttress. Under the premolar and molar occlusion condition, the stress transmits along the alveolar process first, then turns to the nasal-maxillary and zygomatic-maxillary buttress. The focused stress position of the internal fixation system is at the connection between the screws and the plate and at the plate near the osteotomy line. Under the premolar occlusion condition, the displacement of bone segment with different RIF methods was (in a decreasing order) 0.396509 mm (with bio-absorbable plate), 0.148393 mm (with micro-plate ), 0.078436 mm (with mini-plate) in group 1; 0.188791 mm (fixing at the nasal-maxillary buttress), 0.121718 mm (fixing at the zygomatic-maxillary buttress), 0.078436 mm (fixing at the both buttress) in group 2; 0.091023 mm (with straight plate), 0.078436 mm (with L shape plate), 0.072450 mm (with Y shape plate), 0.065617 mm (with T shape plate) in group 3. The fixation stability of using the bio-absorbable plate in Le Fort-I osteotomy is less stable than using the titanium plate. Fixing at the zygomatic-maxillary buttress is more stable than at the naso-maxillary buttress. The fixation stability is different by using different shapes of plates.

Deep and superficial infrapatellar bursae: cadaveric investigation of regional anatomy using magnetic resonance after ultrasound-guided bursography.

PubMed

Viegas, Flavio C; Aguiar, Rodrigo O C; Gasparetto, Emerson; Marchiori, Edson; Trudell, Debbie J; Haghighi, Parviz; Resnick, Donald

2007-01-01

To demonstrate the anatomy of the deep and superficial infrapatellar bursae using magnetic resonance (MR) imaging and anatomic correlation in cadavers. MR imaging of the infrapatellar bursae of nine cadaveric knees was performed after ultrasound-guided bursography. The images were compared with those seen on anatomic sectioning. Histologic analysis was obtained in two specimens. The deep infrapatellar bursa (DIB) was visualized in all specimens (n=9) and the superficial infrapatellar bursa (SIB) in five specimens (55%). The mean dimensions of the DIB in the craniocaudal, mediolateral, and anteroposterior planes were respectively 25, 28.7, and 6 mm, and for SIB 19.5, 21.2 and 2.2 mm. A fat apron dividing the DIB was depicted in eight knees (89%). Lateral extension of the DIB beyond the patellar tendon was observed in 100% of cases. Cadaveric analysis depicted a thin septum in the SIB in four of five cases (80%). The DIB is generally present and extends beyond the lateral margin of the patellar tendon. A fat apron partially separating this structure is usual. The SIB is not an unusual finding and may have a septum separating its compartments.

Is the Maxillary Sinus Really Suitable in Sex Determination? A Three-Dimensional Analysis of Maxillary Sinus Volume and Surface Depending on Sex and Dentition.

PubMed

Möhlhenrich, Stephan Christian; Heussen, Nicole; Peters, Florian; Steiner, Timm; Hölzle, Frank; Modabber, Ali

2015-11-01

The morphometric analysis of maxillary sinus was recently presented as a helpful instrument for sex determination. The aim of the present study was to examine the volume and surface of the fully dentate, partial, and complete edentulous maxillary sinus depending on the sex. Computed tomography data from 276 patients were imported in DICOM format via special virtual planning software, and surfaces (mm) and volumes (mm) of maxillary sinuses were measured. In sex-specific comparisons (women vs men), statistically significant differences for the mean maxillary sinus volume and surface were found between fully dentate (volume, 13,267.77 mm vs 16,623.17 mm, P < 0.0001; surface, 3480.05 mm vs 4100.83 mm, P < 0.0001) and partially edentulous (volume, 10,577.35 mm vs 14,608.10 mm, P = 0.0002; surface, 2980.11 mm vs 3797.42 mm, P < 0.0001) or complete edentulous sinuses (volume, 11,200.99 mm vs 15,382.29 mm, P < 0.0001; surface, 3118.32 mm vs 3877.25 mm, P < 0.0001). For males, the statistically different mean values were calculated between fully dentate and partially edentulous (volume, P = 0.0022; surface, P = 0.0048) maxillary sinuses. Between the sexes, no differences were only measured for female and male partially dentate fully edentulous sinuses (2 teeth missing) and between partially edentulous sinuses in women and men (1 teeth vs 2 teeth missing). With a corresponding software program, it is possible to analyze the maxillary sinus precisely. The dentition influences the volume and surface of the pneumatic maxillary sinus. Therefore, sex determination is possible by analysis of the maxillary sinus event through the increase in pneumatization.

Patient satisfaction with maxillary 3-implant overdentures using different attachment systems opposing mandibular 2-implant overdentures.

PubMed

Al-Zubeidi, Mohammed I; Alsabeeha, Nabeel H M; Thomson, W Murray; Payne, Alan G T

2012-05-01

Patient-based outcomes with maxillary overdentures on a minimum number of implants, opposing mandibular 2-implant overdentures are not evident in the literature. To evaluate patient's satisfaction with maxillary 3-implant overdentures, opposing mandibular 2-implant overdentures, using two different attachment systems over the first 2 years of service. Forty participants wearing mandibular 2-implant overdentures for 3 years were randomly allocated to one of two similar implant system groups to receive maxillary 3-implant overdentures. Twenty participants were allocated to splinted and unsplinted attachment system treatment groups for each system. Patient satisfaction with pre-treatment complete maxillary dentures, with maxillary 3-implant overdentures at baseline and annually for 2 years, was measured using visual analogue scale questionnaires and the oral health impact profiles. Palatal coverage of the maxillary overdentures was reduced at the first annual recall. Data showed significant improvement in pain reduction, comfort, stability, and function variables of the visual analogue scale after treatment. Analysis by prosthodontic design using visual analogue scale showed no significant difference. The total oral health impact profile-14 scores after treatment for all participants, regardless of prosthodontic design, were significantly lower (more satisfied). The overall oral health impact profile-20E score at baseline was significantly higher (more satisfied) compared with pre-treatment conventional maxillary dentures. No significant changes were observed in the first or second years compared with baseline results. Twenty-two participants (84.6%) preferred reduced palatal coverage, regardless of prosthodontic design, after 1 year. Twenty participants (76.9%) still preferred reduced palatal coverage at the end of the second year. The provision of maxillary 3-implant overdentures to oppose mandibular 2-implant overdentures significantly improve levels of patient satisfaction compared with conventional maxillary dentures. © 2011 Wiley Periodicals, Inc.

[Finite element analysis of different load mode on tooth movement for space closure in patient with bimaxillary protrusion].

PubMed

Zhang, X B; Yin, Y F; Yao, H M; Han, Y H; Wang, N; Ge, Z L

2016-07-01

To investigate the stress distribution on the maxillary anterior teeth retracted with sliding mechanics and micro-implant anchorage using different retraction hook heights and positions. DICOM image data including maxilla and upper teeth were obtained with cone-beam CT. The three-dimensional finite element model was constructed using Mimics software. Brackets and archwire model were constructed using Creo software. The models were instantiated using Pro/Engineer software. Abaqus software was used to simulate the sliding mechanics by loading 2 N force on 0, 2, 4, 6, 8, 10 mm retraction hooks and three different positions, repectively. Rotation of the occlusal plane, the initial displacement and stress distribution of teeth were analyzed. Lingual rotation of maxillary central incisor(0.021°), gingival movement of the maxillary first molar(0.005 mm), and clockwise rotation of the maxillary occlusal plane(0.012°) were observed when the force application point located at the archwire level (0 mm). In contrast, 0.235° labial rotation of the maxillary central incisor, 0.015 mm occlusal movement of the maxillary first molar, and 0.075° anti-clockwise rotation of the maxillary occlusal plane were observed when the force application point located at the higher level(10 mm retraction hook). The more the force application point was located posteriorly at the archwire level, the less lingual rotation of the maxillary central incisor and the more buccal displacement of maxillary first molar was observed. Maxillary anterior tooth rotation and retraction, vertical displacement of posterior segment, and rotation of the occlusal plane could be controlled by adjusting the height and position of the retraction hook in space closure using miniscrew and sliding mechanics.

Maxillary growth after maxillary protraction: Appliance in conjunction with presurgical orthopedics, gingivoperiosteoplasty, and Furlow palatoplasty for complete bilateral cleft lip and palate patients with protruded premaxilla.

PubMed

Kobayashi, Shinji; Hirakawa, Takashi; Fukawa, Toshihiko; Maegawa, Jiro

2015-06-01

In bilateral cleft lip and palate (BCLP) with premaxillary protrusion, a good outcome with adequate maxillary development is difficult to achieve. The purpose of this article is to evaluate the maxillary growth after using presurgical orthopedics (PSO), gingivoperiosteoplasty (GPP), Furlow palatoplasty, and maxillary protraction appliance (MPA) for BCLP with premaxillary protrusion. Seven patients with complete BCLP with premaxillary protrusion were treated by PSO, cheiloplasty, GPP, and Furlow palatoplasty. MPA was used as part of the protocol for 6 months to 1 year for postoperative retardation of maxillary growth cases. Maxillary growth was evaluated by cephalometric analysis at 4 and 10 years of age, and bone formation at the alveolar cleft was evaluated by computed tomography (CT) imaging at 5 years of age. At 4 years of age, three of seven patients had apparent retardation of maxillary growth. The maxillary growth at 10 years of age was equivalent to the average value of normal Japanese after using MPA in three cases. At 5 years of age, only two of seven patients showed sufficient bone formation at the alveolar cleft to avoid alveolar bone grafting (ABG). Subsequently, ABG was performed in five patients. Although three of seven patients had apparent crossbite at 4 years of age, the maxillary growth of all patients at 10 years of age was approximately equivalent to the average value of normal Japanese after using MPA. A treatment protocol based on PSO, GPP, Furlow palatoplasty, and MPA may be an option, but long-term growth is unknown. Copyright © 2015 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Aspergillus in endodontic infection near the maxillary sinus.

PubMed

Gomes, Cinthya Cristina; Pinto, Larissa Christina Costa; Victor, Fernanda Loretti; Silva, Erlange Andrade Borges da; Ribeiro, Apoena de Aguiar; Sarquis, Maria Inês de Moura; Camões, Isabel Coelho Gomes

2015-01-01

Diseases of the maxillary sinus have been associated with dental roots near the maxillary sinus that have undergone endodontic treatment. To investigate the presence of filamentous fungi in patients with dental roots near the maxillary sinus who had apical periodontitis treated endodontically, and to alert practitioners that this could be a possible avenue of contamination of the sinus in patients who develop maxillary sinus infection. Cross-sectional study in 60 palatal roots of the first maxillary molars near the maxillary sinus, that underwent endodontic treatment for apical periodontitis. After removal of the filling material, dentin shavings were collected and placed in test tubes containing Sabouraud dextrose agar and chloramphenicol. The phenotype was determined by macroscopic and microscopic examination of the colonies. For polymerase chain reaction, the primers ITS-5 and ITS-4 were used. The sequences obtained were compared with those deposited at GenBank using the Basic Local Alignment Search Tool program. Filamentous fungi were isolated from 6 of 60 canals (10%): Aspergillus niger (6.7%), Aspergillus versicolor (1.6%), and Aspergillus fumigatus (1.6%). Root canals near the maxillary sinus with endodontic treatment and apical periodontitis may exhibit positive cultures for filamentous fungi. Interested professionals should be alert, because these microorganisms have pathogenic characteristics that can cause disease of odontogenic origin in the maxillary sinus. Copyright © 2015 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

Relationship between formation/eruption of maxillary teeth and skeletal pattern of maxilla.

PubMed

Suda, Naoto; Hiyama, Shigetoshi; Kuroda, Takayuki

2002-01-01

Previous reports have indicated that formation and eruption of the maxillary teeth, especially the molars, are delayed in skeletal Class III patients compared with Class I and Class II patients. However, the relationship between the formation/eruption of maxillary teeth and the skeletal pattern of the maxilla is not yet clear. To examine this relationship, we studied 81 skeletal Class III Japanese patients (mean age, 8.8 years). The sample was divided into 2 groups: a maxillary retrusion (MR) group, characterized by a small SNA angle and a short palatal length, and a control group in which those values were in the normal range for patients of Japanese descent. There was no significant difference in the rate of formation for the maxillary and mandibular teeth between the 2 groups. The eruption of the maxillary second molars was delayed in the MR group compared with the control group. There were no significant differences between the 2 groups for any other teeth. A multiple-regression analysis was carried out to examine whether the skeletal pattern of the maxilla is a useful indicator for predicting the eruption of the maxillary teeth. The results showed that palatal length and chronologic age were significant independent (explanatory) variables for predicting eruption of the maxillary second molars. These findings indicated that the skeletal pattern of the maxilla is a useful indicator for predicting the timing of maxillary molar eruption when considering treatment of skeletal Class III malocclusions.

Sex Determination of Adult Human Maxillary Sinuses on Panoramic Radiographs

PubMed Central

Leao de Queiroz, Cristhiane; Terada, Andrea Sayuri Silveira Dias; Dezem, Thais Uenoyama; Gomes de Araújo, Lais; Galo, Rodrigo; Oliveira-Santos, Christiano

2016-01-01

Absract The purpose of this study was to evaluate dimensions of adult human maxillary sinuses on panoramic radiographs and their possible application on the sex determination for forensic purposes. The sample comprised 64 database panoramic radiographs from individuals aged 20 years or older (32 male and 32 female subjects), with complete permanent dentition (or absence of third molars). One examiner measured the width and height of the right and left maxillary sinuses using the software Image J 1.47v (National Institutes of Health, Bethesda, USA). Measurements were repeated to calculate intra-observer agreement. Chi-Square test, Kappa, ANOVA and T-Student were used for results analysis for p≤ 0.05. Intra-observer agreement with correlation Kappa ranged between 0.38 and 0.96. For female subjects, the mean height and width of the left maxillary sinus were 28.7856mm and 44.6178mm, respectively. And right maxillary sinus was 27.7163mm for height and 45.1850mm for width. Male subjects were found to have the mean height and width of the left maxillary sinus 30.9981mm and 48.7753mm, respectively. And right maxillary sinus was 30.7403mm for height and 48.5753mm for width. There was a statistically significant difference in the height and width of maxillary sinuses between males and females. It can be concluded that maxillary sinuses height and width on panoramic radiographs can be used to determine the gender of adult human subjects. PMID:27847394

Evaluation of long-term stability of skeletal anterior open bite correction in adults treated with maxillary posterior segment intrusion using zygomatic miniplates.

PubMed

Marzouk, Eiman S; Kassem, Hassan E

2016-07-01

This study evaluated the long-term stability of maxillary molar intrusion and anterior open-bite correction in adults treated by maxillary posterior teeth intrusion with zygomatic miniplates. The sample included 26 skeletal anterior open-bite patients, who had maxillary posterior segment intrusion with zygomatic miniplates. Lateral cephalograms were taken at pretreatment, posttreatment, 1 year posttreatment, and 4 years posttreatment. The mean maxillary molar intrusion was 3.04 mm (P ≤0.01), and the mean bite closure was 6.93 mm (P ≤0.01). The intruded maxillary molars relapsed by 10.20% in the first year after treatment and by 13.37% by 4 years after treatment. Overbite relapsed by 8.19% and 11.18% after 1 year and 4 years posttreatment, respectively. The first year after treatment accounted for 76.29% and 73.2% of the total relapses of molar intrusion and overbite, respectively. The 4-year posttreatment relapse amounts of maxillary molar intrusion and overbite were positively correlated with the amount of pretreatment maxillary molar height and the initial open-bite severity, respectively, but negatively correlated with the amounts of maxillary molar intrusion and open-bite correction gained by treatment. Molar intrusion with zygomatic miniplates appears to be stable 4 years after treatment. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Rapid maxillary distraction protocol utilizing the halo distraction system and rigid internal fixation.

PubMed

Baker, Stephen B; Reid, Russell R; Burkey, Brooke; Bartlett, Scott P

2007-09-01

To shorten head frame wear time associated with external halo distraction (HD), we have adapted a protocol for maxillary distraction with the halo system that integrates plate fixation. All patients had a history of cleft lip and/or palate and maxillary retrusion > or = 8 mm. Five patients treated with this protocol and followed for at least 1 year were included in this study. The protocol included a 3-day latency period, variable maxillary distraction, and removal of the halo device with simultaneous rigid internal fixation. Two patients had a variable period of maxillomandibular fixation (MMF), which maintained the maxillary advancement and idealized intercuspal position while permitting further callus maturation. Cephalographs were obtained preoperatively, immediately following distractor removal, and 1 year after rigid internal fixation. The mean age at time of surgery was 18.7 years. The maxillary deficiency ranged from 8 to 15 mm (mean = 10.6 mm). All five patients demonstrated excellent occlusion. Cephalometric analysis 1-year post rigid internal fixation revealed minimal (<1 mm) skeletal relapse. Rapid maxillary distraction followed by MMF to maintain maxillary advancement may reduce halo device wear to 1 to 2 weeks. MMF optimizes occlusion by forcing the maxillary teeth into maximal intercuspal position. Rigid fixation is not only associated with less long-term relapse compared to nonrigid forms of fixation, but also minimizes the incidence of nonunion. This treatment protocol provides the advancement possible with distraction osteogenesis and the accuracy of orthognathic surgery, thereby minimizing external head frame wear.

Impact of the Distance of Maxillary Advancement on Horizontal Relapse After Orthognathic Surgery.

PubMed

Fahradyan, Artur; Wolfswinkel, Erik M; Clarke, Noreen; Park, Stephen; Tsuha, Michaela; Urata, Mark M; Hammoudeh, Jeffrey A; Yamashita, Dennis-Duke R

2018-04-01

The maxillary horizontal relapse following Le Fort I advancement has been estimated to be 10% to 50%. This retrospective review examines the direct association between the amounts of maxillary advancement and relapse. We hypothesize that the greater the advancement, the greater the relapse amount. Patients with class III skeletal malocclusion underwent maxillary advancement with either a Le Fort I or a Le Fort I with simultaneous mandibular setback (bimaxillary surgery) from 2008 to 2015. Patients were assessed for a history of cleft lip or cleft palate. Patients with known syndromes were excluded. Cephalometric analysis was performed to compare surgical and postsurgical changes. Of 136 patients, 47.1% were males and 61.8% had a history of cleft. The mean surgery age was 18.9 (13.8-23) years and 53.7% underwent a bimaxillary procedure. A representative subgroup of 35 patients had preoperative, immediate postoperative, and an average of 1-year postoperative lateral cephalograms taken. The mean maxillary advancement was 6.3 mm and the horizontal relapse was 1.8 mm, indicating a 28.6% relapse. A history of cleft and amount of maxillary advancement were directly correlated, whereas bone grafting of the maxillary osteotomy sites was inversely correlated with the amount of relapse ( P < .05). Our data suggest positive correlation between amount of maxillary advancement and horizontal relapse as well as a positive correlation between history of cleft and horizontal relapse. Bone grafting of the maxillary osteotomy sites has a protective effect on the relapse.

Mucosal Cysts of the Maxillary Sinus in Solid Organ Transplant Population: Computerised Tomography Follow-Up Results

PubMed Central

Aydın, Erdinç; Yerli, Hasan; Tanrıkulu, Suna; Hizal, Evren

2013-01-01

Background: The clinical significance of maxillary sinus mucosal cysts in liver and kidney transplant recipients remains unclear. Aim: To investigate the course of maxillary mucosal cysts in liver and kidney transplantation patients. Study Design: Retrospective clinical study Methods: Paranasal sinus computed tomography scans of 169 renal and 43 hepatic transplant recipients were reviewed. The incidence, size and growth characteristics of maxillary mucosal cysts in the renal and hepatic transplant population were noted. Results: Overall incidence of maxillary sinus mucosal cyst in transplantation patients was found to be 24.5%, with a male to female ratio of 2:1 (p<0.05). Follow-up views of 26 patients showed that the size of the cysts increased in 19, decreased in 4, and remained the same in 3 patients. Mean growth rate of the cysts was calculated to be 6.30 ± 7.02 mm2 per month. Most of the cysts were located on the inferior wall of the maxillary sinus. Conclusion: Incidence of the maxillary mucosal cysts in renal and hepatic transplant recipients does not differ from general population, but these cysts have a greater tendency to grow. Specific measures are not needed for isolated, asymptomatic maxillary mucosal cysts in transplant populations. PMID:25207125

Validity of palatal superimposition of 3-dimensional digital models in cases treated with rapid maxillary expansion and maxillary protraction headgear

PubMed Central

Choi, Jin-Il; Jost-Brinkmann, Paul-Georg; Choi, Dong-Soon; Jang, In-San

2012-01-01

Objective The purpose of this study was to evaluate the validity of the 3-dimensional (3D) superimposition method of digital models in patients who received treatment with rapid maxillary expansion (RME) and maxillary protraction headgear. Methods The material consisted of pre- and post-treatment maxillary dental casts and lateral cephalograms of 30 patients, who underwent RME and maxillary protraction headgear treatment. Digital models were superimposed using the palate as a reference area. The movement of the maxillary central incisor and the first molar was measured on superimposed cephalograms and 3D digital models. To determine whether any difference existed between the 2 measuring techniques, intra-class correlation (ICC) and Bland-Altman plots were analyzed. Results The measurements on the 3D digital models and cephalograms showed a very high correlation in the antero-posterior direction (ICC, 0.956 for central incisor and 0.941 for first molar) and a moderate correlation in the vertical direction (ICC, 0.748 for central incisor and 0.717 for first molar). Conclusions The 3D model superimposition method using the palate as a reference area is as clinically reliable for assessing antero-posterior tooth movement as cephalometric superimposition, even in cases treated with orthopedic appliances, such as RME and maxillary protraction headgear. PMID:23173116

Change in frequency of the maxillary midline diastema appearing in photographs of Caucasian females in two fashion magazines from 2003 to 2012.

PubMed

Lewis, Kylie C; Sherriff, Martyn; Stewart Denize, E

2014-06-01

To ascertain if there has been a change in the frequency of appearance of maxillary midline diastema in two leading women's fashion magazines over a decade. Two observers counted the frequency of maxillary midline diastema that appeared in Caucasian female models featured in British Vogue and Glamour (UK). An increase in the frequency of maxillary midline diastema appearing in both publications was observed between 2003 and 2012. This change may indicate an increase in the acceptance of the maxillary midline diastema, which may in turn, influence orthodontic and aesthetic dentistry treatment planning. © 2014 British Orthodontic Society.

Initial Experience With a New Intraoral Midface Distraction Device.

PubMed

Burstein, Fernando; Soldanska, Magdalena; Granger, Michael; Berhane, ChiChi; Schoemann, Mark

2015-06-01

Maxillary hypoplasia that necessitates surgical advancement affects approximately 25% of patients born with cleft lip and palate. Syndromic conditions such as Crouzon may also be accompanied by significant maxillary hypoplasia. Severe maxillary hypoplasia can result in airway obstruction, malocclusion, proptosis, and facial disfigurement. For optimal stability, severe hypoplasia is best addressed with maxillary distraction osteogenesis. Twenty-two patients (15 boys, 7 girls, ages 6-16 years, mean age 10 years) with severe midface hypoplasia underwent midface distraction with new internal maxillary distraction (IMD) device at our institution. Total distraction distances ranged from 15 to 30 mm. There were no major complications, and all of them had improvement in functional and aesthetic parameters. There were 2 minor complications and 2 patients failed to distract the full distance because of converging vectors. Early maxillary distraction in patients with severe midface hypoplasia is a useful technique to provide interval correction of severe maxillary hypoplasia before skeletal maturity and definitive orthognathic surgery is contemplated, and it is a good tool to improve occlusion, aesthetics, and self-perception in younger patients.

Initial Experience With a New Intraoral Midface Distraction Device

PubMed Central

Burstein, Fernando; Soldanska, Magdalena; Granger, Michael; Berhane, ChiChi; Schoemann, Mark

2015-01-01

Abstract Maxillary hypoplasia that necessitates surgical advancement affects approximately 25% of patients born with cleft lip and palate. Syndromic conditions such as Crouzon may also be accompanied by significant maxillary hypoplasia. Severe maxillary hypoplasia can result in airway obstruction, malocclusion, proptosis, and facial disfigurement. For optimal stability, severe hypoplasia is best addressed with maxillary distraction osteogenesis. Twenty-two patients (15 boys, 7 girls, ages 6–16 years, mean age 10 years) with severe midface hypoplasia underwent midface distraction with new internal maxillary distraction (IMD) device at our institution. Total distraction distances ranged from 15 to 30 mm. There were no major complications, and all of them had improvement in functional and aesthetic parameters. There were 2 minor complications and 2 patients failed to distract the full distance because of converging vectors. Early maxillary distraction in patients with severe midface hypoplasia is a useful technique to provide interval correction of severe maxillary hypoplasia before skeletal maturity and definitive orthognathic surgery is contemplated, and it is a good tool to improve occlusion, aesthetics, and self-perception in younger patients. PMID:26080162

Multimodal Chemosensory Integration through the Maxillary Palp in Drosophila

PubMed Central

Shiraiwa, Takashi

2008-01-01

Drosophila melanogaster has an olfactory organ called the maxillary palp. It is smaller and numerically simpler than the antenna, and its specific role in behavior has long been unclear. Because of its proximity to the mouthparts, I explored the possibility of a role in taste behavior. Maxillary palp was tuned to mediate odor-induced taste enhancement: a sucrose solution was more appealing when simultaneously presented with the odorant 4-methylphenol. The same result was observed with other odors that stimulate other types of olfactory receptor neuron in the maxillary palp. When an antennal olfactory receptor was genetically introduced in the maxillary palp, the fly interpreted a new odor as a sweet-enhancing smell. These results all point to taste enhancement as a function of the maxillary palp. It also opens the door for studying integration of multiple senses in a model organism. PMID:18478104

Surgically assisted rapid maxillary expansion in adults.

PubMed

Pogrel, M A; Kaban, L B; Vargervik, K; Baumrind, S

1992-01-01

Twelve adults with maxillary width discrepancy of greater than 5 mm were treated by surgically assisted rapid maxillary expansion. The procedure consisted of bilateral zygomatic buttress and midpalatal osteotomies combined with the use of a tooth-borne orthopedic device postoperatively. Mean palatal expansion of 7.5 mm (range of 6 to 13 mm), measured in the first molar region, was achieved within 3 weeks in all patients. Expansion remained stable during the 12-month study period, with a mean relapse for the entire group of 0.88 +/- 0.48 mm. Morbidity was limited to mild postoperative discomfort. The results of this preliminary study indicated that surgically assisted rapid maxillary expansion is a safe, simple, and reliable procedure for achieving a permanent increase in skeletal maxillary width in adults. Further study is necessary to document the three-dimensional movements of the maxillary segments and long-term stability of the skeletal and dental changes.

Maxillary molar intrusion with micro-implant anchorage (MIA).

PubMed

Park, Hyo-Sang; Jang, Bong-Kyu; Kyung, Hee-Moon

2005-11-01

Intrusion of the maxillary molars is difficult to accomplish using traditional methods of anchorage. To describe methods of maxillary molar intrusion with the aid of micro-implants. Micro-implants provide stable intra-oral anchorage and enable the maxillary molars to be intruded without the usual side effects. Three adult patients are presented showing how micro-implants can be used to intrude the maxillary molars. In the first patient micro-implants were placed in the alveolar process between the second premolar and first molar, in the second patient micro-implants were placed in the palatal alveolar process between the first and second molars, and in the third patient a micro-implant was placed in the palate paramedially. A transpalatal bar was used to prevent bucco- or linguoversion of the molars during intrusion. The maxillary molars can be intruded with intra-oral anchorage derived from microscrew implants.

Mandibular fracture patterns consistent with posterior maxillary fractures involving the posterior maxillary sinus, pterygoid plate or both: CT characteristics.

PubMed

Imai, T; Sukegawa, S; Kanno, T; Fujita, G; Yamamoto, N; Furuki, Y; Michizawa, M

2014-01-01

The aim of this study was to determine the incidence of posterior maxillary fractures involving the posterior maxillary sinus wall, pterygoid plate or both, unrelated to major midface fractures in patients with mandibular fractures, and to characterize associated fractures. A CT study was performed in patients with mandibular fractures to identify posterior maxillary fractures. Patients aged under 16 years, those with mandibular fractures involving only dentoalveolar components and those with concurrent major midfacial fractures were excluded. 13 (6.7%) of 194 patients with mandibular fractures also had posterior maxillary fractures (case group). The injury pattern correlated with the external force directed to the lateral side of the mandible (p < 0.001), alcohol consumption (p = 0.049), the presence of multifocal fractures (p = 0.002) and the fracture regions in the symphysis/parasymphysis (p = 0.001) and the angle/ramus (p = 0.001). No significant difference between the case and non-case groups was seen for age, sex or cause of trauma. Non-displaced fractures in the ipsilateral posterior mandible occurred with significant frequency (p = 0.001) when the posterior maxillary fractures involved only the sinus. Mandibular fractures accompanied by posterior maxillary fractures are not rare. The finding of a unilateral posterior maxillary fracture on CT may aid the efficient radiological examination of the mandible based on possible patterns of associated fractures, as follows: in the ipsilateral posterior region as a direct fracture when the impact is a medially directed force, and in the symphysis/parasymphysis or contralateral condylar neck as an indirect fracture.

Cone beam computed tomography analysis of dentoalveolar changes immediately after maxillary expansion

PubMed Central

Domann, Carin Elizabeth; Kau, Chung How; English, Jeryl D.; Xia, James J.; Souccar, Nada M.; Lee, Robert P.

2015-01-01

Aim Rapid maxillary expansion (RME) splits the midpalatal suture to correct maxillary transverse discrepancies and increase the arch perimeter. The goal of this paper is to evaluate the immediate effects of RME with Hyrax appliances on the dentoalveolar complex using cone beam computed tomography (CBCT). Methods Twenty-eight patients (19 females and 9 males) requiring maxillary expansion therapy were included (mean age, 14.1 years; range, 13 to 20 years). CBCT images were taken at T1 (before maxillary expansion) and T2 (immediately after expansion) as part of clinical records. Maxillary arch width, posterior segment angulation, and buccal bone thickness at the level of the first premolar and first molar were evaluated. Paired t tests determined statistical significance (P < .05). Results The mean ± SD amount of expansion achieved was 4.7788 ± 2.8474 mm for the maxillary premolars and 4.6943 ± 3.2198 mm for the molars. Significant tipping of the palatal roots of the maxillary right and left premolars as well as that for the maxillary left molar was observed. When present, the thickness of the buccal plate decreased on all observed roots. Conclusion There is a significant increase in interpremolar and intermolar distance with RME. The increase in root angulation suggests that the movement is more tipping than translation. The thickness of the buccal plate decreases immediately after RME. Therefore, the level of inflammation should be closely monitored to avoid periodontal destruction. There is a need to define standardized reference planes and comparable methodology to achieve compatible results among studies. PMID:22022691

Prevalence, association, and sexual dimorphism of Carabelli's molar and shovel incisor traits amongst Jordanian population.

PubMed

Khraisat, A; Taha, Sahar T; Jung, R E; Hattar, S; Smadi, L; Al-Omari, I K; Jarbawi, M

2007-09-01

The correlation between dental morphological traits can be used as an indicator to show major ethnic differences. Therefore, this study investigated the prevalence of Carabelli's molar and shovel incisor traits and tested their association and sexual dimorphism in Jordanian population. Three hundred subjects of school children at their 10th grade and of 15.5-year as an average age were involved. Alginate impressions for the maxillary arch were taken, poured, and casts were then trimmed. The selected accurate casts were of 132 male- and 155 female-students. The examined morphologic traits were Carabelli's trait on the maxillary first and second molars and shovel-shaped incisors. The relationship between different traits was investigated by Nonparametric Correlation analysis and Independent Sample t test was used to test sexual dimorphism in trait expression. The prevalence of Carabelli's trait in maxillary first molar and shovel trait in maxillary central incisor was relatively high (65.0 % and 53.0 %, respectively). The prevalence of Carabelli's trait on maxillary second molars was 3.8 %. Nonparametric Correlations revealed a strongest positive correlation between Carabelli's trait on maxillary first molar and shovel trait in males (P = 0.005). Significant sexual dimorphism was only found in the prevalence of Carabelli's trait on maxillary first molar (P = 0.013) and shovel trait (P = 0.038). The Jordanian Population had comparatively high prevalence of Carabelli's molar and shovel incisor traits. There was a positive association between Carabelli's trait on maxillary first molar and shovel trait in males. Sexual dimorphism was evident in Carabelli's trait on maxillary first molar and shovel trait.

Soft tissue changes from maxillary distraction osteogenesis versus orthognathic surgery in patients with cleft lip and palate--a randomized controlled clinical trial.

PubMed

Chua, Hannah Daile P; Cheung, Lim Kwong

2012-07-01

The objective of this randomized controlled clinical trial was to compare the soft tissue changes after maxillary advancement using conventional orthognathic surgery (CO) and distraction osteogenesis (DO) in patients with cleft lip and palate (CLP). The study group of 39 CLP patients with maxillary hypoplasia underwent either CO or DO with 4 to 10 mm of maxillary advancement. Lateral cephalographs were taken preoperatively and postoperatively at regular intervals. A series of skeletal, dental, and soft tissue landmarks was used to evaluate the changes in the soft tissue and the correlation of hard and soft tissue changes and ratios. Significant differences were found between the CO and DO patients at A point in both maxillary advancement and downgrafting in the early follow-up period. On soft tissue landmarks of pronasale, subnasale, and labial superius, significant differences were found between the 2 groups at 6 months postoperatively only with maxillary advancement. There was better correlation of hard and soft tissue changes with maxillary advancement. The nasal projection was significantly different between the 2 groups at the early and intermediate period. There was much more consistent hard to soft tissue ratios in maxillary advancement with DO than with CO. Both CO and DO can induce significant soft tissue changes of the upper lip and nose, particularly with maxillary advancement. DO generates more consistent hard to soft tissue ratios. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Maxillary distraction osteogenesis in the adolescent cleft patient: three-dimensional computed tomography analysis of linear and volumetric changes over five years.

PubMed

Chen, Philip Kuo-Ting; Por, Yong-Chen; Liou, Eric Jein-Wein; Chang, Frank Chun-Shin

2011-07-01

To assess the results of maxillary distraction osteogenesis with the Rigid External Distraction System using three-dimensional computed tomography scan volume-rendered images with respect to stability and facial growth at three time frames: preoperative (T0), 1-year postoperative (T1), and 5-years postoperative (T2). Retrospective analysis. Tertiary. A total of 12 patients with severe cleft maxillary hypoplasia were treated between June 30, 1997, and July 15, 1998. The mean age at surgery was 11 years 1 month. Le Fort I maxillary distraction osteogenesis. Distraction was started 2 to 5 days postsurgery at a rate of 1 mm per day. The consolidation period was 3 months. No face mask was used. A paired t test was used for statistical analysis. Overjet, ANB, and SNA and maxillary, pterygoid, and mandibular volumes. From T0 to T1, there were statistically significant increments of overjet, ANB, and SNA and maxillary, pterygoid, and mandibular volumes. The T1 to T2 period demonstrated a reduction of overjet (30.07%) and ANB (54.42%). The maxilla showed a stable SNA and a small but statistically significant advancement of the ANS point. There was a significant increase in the mandibular volume. However, there was no significant change in the maxillary and pterygoid volumes. Maxillary distraction osteogenesis demonstrated linear and volumetric maxillary growth during the distraction phase without clinically significant continued growth thereafter. Overcorrection is required to take into account recurrence of midface retrusion over the long term.

Maxillary second molar extractions in orthodontic treatment.

PubMed

Lee, Wilson; Wong, Ricky Wing-Kit; Ikegami, Tomio; Hägg, Urban

2008-01-01

This article is a review of the rationales, indications, methods, and effects of orthodontic treatment with maxillary second molar extractions. In addition to the patient's malocclusion, specific considerations about the status and position of the maxillary second and third molars should be taken into account. In recent years, the development of temporary anchorage devices, in addition to extraoral traction and intraoral distalization appliances, has become another armamentarium in the distalization of the maxillary posterior teeth, which may affect the selection of teeth to be extracted from second to third molars. In conclusion, extraction of maxillary second molars is a viable option in selected cases at present, but it is important to understand the indications and limitations of this treatment choice.

The effect of the presence of the accessory maxillary ostium on the maxillary sinus.

PubMed

Yenigun, Alper; Fazliogullari, Zeliha; Gun, Cihat; Uysal, Ismihan Ilknur; Nayman, Alaaddin; Karabulut, Ahmet Kagan

2016-12-01

This study was conducted to investigate the presence of the accessory maxillary ostium and its effects on the maxillary sinus, and the concurrent occurrence of morphological variations of neighboring anatomical structures. This study was performed in a tertiary referral center. This is a cross-sectional retrospective study that evaluated coronal CTs of patients to determine the frequency of the accessory maxillary ostium and investigated any simultaneous morphological variations in neighboring anatomical structures. The presence of the accessory maxillary ostium (AMO) plus any concurrent morphological variations of neighboring structures were investigated in 377 patients, with 754 sides. AMO was found to be present in 19.1 % (72/377) of the patients. A concurrent mucus retention cyst was found to be statistically significant on both sides (right side: p = 0.00, left side: p = 0.00), as well as mucosal thickening (right side: p = 0.00, left side: p = 0.00), and maxillary sinusitis (right side: p = 0.04, left side: p = 0.03). No other concurrent variations of statistical significance were detected in the neighboring structures. Our study demonstrated that with the presence of AMO, the likelihood of encountering a mucus retention cyst (48.6 %) had an approximately threefold increase, and that of encountering mucosal thickening (43.0 %) and maxillary sinusitis (29.1 %) had a twofold increase.

Combined treatment with headgear and the Frog appliance for maxillary molar distalization: a randomized controlled trial

PubMed Central

2013-01-01

Objective To evaluate the efficiency of the Frog appliance (FA) alone or in combination with headgear for distalizing the maxillary molars. Methods Fifty patients (25 males and 25 females) aged 12.6 - 16.7 years who received treatment for Class II malocclusion at the Orthodontic Clinic of Al-Baath University were selected for this study and randomly divided into 2 equal groups. Maxillary molar distalization was achieved using the FA alone (group 1) or a combination of the FA with high-pull headgear worn at night (group 2). Lateral cephalograms were obtained before and after treatment. Results The maxillary molars moved distally by 5.51 and 5.93 mm in groups 1 and 2, respectively. Distal movements were associated with axial tipping by 4.96° and 1.25°, and with loss of anchorage by mesial movement of the second maxillary premolars by 2.70 and 0.90 mm in groups 1 and 2, respectively. The combined use of the FA and nighttime high-pull headgear decreased the distalization time and improved the ratio of maxillary molar distalization movement relative to the overall opening space between the first maxillary molars and second premolars. Conclusions The FA can effectively distalize the maxillary molars, this distalization associates with some unfavorable changes. Nighttime use of high-pull headgear combined with the FA can reduce these unfavorable changes and improve treatment outcomes. PMID:23671835

Bilateral en-masse distalization of maxillary posterior teeth with skeletal anchorage: a case report

PubMed Central

Noorollahian, Saeed; Alavi, Shiva; Shirban, Farinaz

2016-01-01

ABSTRACT Objective: The aim of this study was to introduce a new method for bilateral distal movement of the entire maxillary posterior segment. Case report: A 17-year-old girl with Class I skeletal malocclusion (end-to-end molar relationships, deviated midline and space deficiency for left maxillary canine) was referred for orthodontic treatment. She did not accept maxillary first premolars extraction. A modified Hyrax appliance (Dentaurum Ispringen, Germany) was used for bilateral distalization of maxillary posterior teeth simultaneously. Expansion vector was set anteroposteriorly. Posterior legs of Hyrax were welded to first maxillary molar bands. All posterior teeth on each side consolidated with a segment of 0.017 × 0.025-in stainless steel wire from the buccal side. Anterior legs of Hyrax were bent into eyelet form and attached to the anterior palate with two mini-screws (2 × 10 mm) (Jeil Medical Corporation Seoul, South Korea). Hyrax opening rate was 0.8 mm per month. Lateral cephalometric radiographs were used to evaluate the extent of distal movement. 3.5-mm distalization of posterior maxillary teeth was achieved in five months. Results: A nearly bodily distal movement without anchorage loss was obtained. Conclusion: The mini-screw-supported modified Hyrax appliance was found to be helpful for achieving en-masse distal movement of maxillary posterior teeth. PMID:27409657

Distal movement of maxillary molars in nongrowing patients with the skeletal anchorage system.

PubMed

Sugawara, Junji; Kanzaki, Reiko; Takahashi, Ichiro; Nagasaka, Hiroshi; Nanda, Ravindra

2006-06-01

It is now possible to predictably move maxillary molars distally in nongrowing patients with the skeletal anchorage system (SAS) and to improve malocclusions without having to extract the premolars and regardless of the patient's compliance. The purposes of this study were to investigate the amount of distal movement of the maxillary first molars, the type of movement, the difference between actual and predicted amounts of distalization, and the relationship between the amount of distalization and age. Twenty-five nongrowing patients (22 female, 3 male) successfully treated with the SAS were the subjects in this study. The amount and the type of distalization, the difference between predicted and resulting amounts of distalization, and the relationship between the patient's age and the amount of distalization were analyzed with wide-opening cephalometric radiographs. The average amount of distalization of the maxillary first molars was 3.78 mm at the crown level and 3.20 mm at the root level. The amount of distalization at the crown level was significantly correlated with the average value of treatment goals (3.60 mm). The maxillary molars were predictably distalized in accordance with the individualized treatment goals without regard to patient age and extraction of the third or second molars. The SAS is a viable noncompliance modality to move maxillary molars for distally correcting maxillary protrusions and malocclusions characterized by maxillary incisor crowding.

Soft Tissue Changes in Cleft Lip and Palate Patients: Anterior Maxillary Distraction versus Conventional Le-Fort I Osteotomy.

PubMed

Markose, Eldho; Paulose, Joby; Paul, Eldho T

2013-12-01

The purpose of the study was to compare the soft tissue changes after maxillary advancement in patients with maxillary deficiency associated with cleft lip and palate (CLP) by two approaches-anterior maxillary distraction (AMD) and advancement LeFort I osteotomy (ALO). Twenty patients with maxillary hypoplasia associated with cleft lip and palate who had undergone either LeFort I osteotomy or distraction osteogenesis with maxillary advancement were included in this study. Lateral cephalogram taken at various intervals of time were used to evaluate soft tissue and hard tissue changes over time. In both groups, vertical as well as horizontal changes in pronasale was well observed. A substantial increase in nasal parameters was noted in case of AMD group in comparison to ALO. Though maxillary advancement was evident in both the groups, a significant and consistent change was observed in AMD. Significant vertical and horizontal changes were seen with respect to subnasale and labrale superius in AMD group. Soft tissue as well as hard tissue relapse was greater in ALO group than AMD group. Significant soft tissue and hard tissue changes were clearly observed in both the groups, but the treatment results were more consistent in cases treated with AMD. Hence AMD could be considered as a better treatment of choice in cases of maxillary hypoplasia associated with cleft lip and palate.

Perception of smile esthetics by laypeople of different ages.

PubMed

Sriphadungporn, Chompunuch; Chamnannidiadha, Niramol

2017-12-01

Age is a factor affecting smile esthetics. Three variables of smile esthetics associated with the maxillary anterior teeth and age-related changes have recently received considerable attention: (i) the incisal edge position of the maxillary central incisors, (ii) the maxillary gingival display, and (iii) the presence of a black triangle between the maxillary central incisors. The aim of this study was to evaluate the influence of age on smile esthetic perception based on these three variables in a group of Thai laypeople. The smiles were constructed from a photograph of a female smile. Smile photographs were altered in various increments using three variables: the incisal edge position of the maxillary incisors, gingival display, and a black triangle between the maxillary central incisors. The photographs were shown to a group of 240 Thai laypeople. The subjects were divided into two groups: a younger group, 15-29 years old (n = 120) and an older group, 36-52 years old (n = 120). Each subject was asked to score the attractiveness of each smile separately using a visual analog scale. Smile attractiveness scores concerning the incisal edge positions of the maxillary central incisors were similar between the two groups. However, upper lip coverage was rated as unattractive by the younger group. A gingival display of 0 and 2 mm was rated as most attractive by the younger group. Upper lip coverage and gingival display of 0 and 2 mm were considered attractive by the older group. Excessive gingival display (6 mm) was scored as unattractive by both groups. A black triangle ranging from 1 to 2.5 mm between the maxillary central incisors was scored differently between the two groups. The older group was more tolerant of the black triangle size. Age impacts smile perception based on maxillary gingival display and the presence of a black triangle between the maxillary central incisors, but not of the incisal edge position of the maxillary central incisors. Due to the variation in esthetic perception of each individual, participation between orthodontists and patients for decision-making and treatment planning is a crucial process to provide successful results.

Anatomy of the Enigmatic Reptile Elachistosuchus huenei Janensch, 1949 (Reptilia: Diapsida) from the Upper Triassic of Germany and Its Relevance for the Origin of Sauria.

PubMed

Sobral, Gabriela; Sues, Hans-Dieter; Müller, Johannes

2015-01-01

The holotype and only known specimen of the enigmatic small reptile Elachistosuchus huenei Janensch, 1949 from the Upper Triassic (Norian) Arnstadt Formation of Saxony-Anhalt (Germany) is redescribed using μCT scans of the material. This re-examination revealed new information on the morphology of this taxon, including previously unknown parts of the skeleton such as the palate, braincase, and shoulder girdle. Elachistosuchus is diagnosed especially by the presence of the posterolateral process of the frontal, the extension of the maxillary tooth row to the posterior margin of the orbit, the free posterior process of the jugal, and the notched anterior margin of the interclavicle. Phylogenetic analyses using two recently published character-taxon matrices recovered conflicting results for the phylogenetic position of Elachistosuchus-either as an archosauromorph, as a lepidosauromorph or as a more basal, non-saurian diapsid. These different placements highlight the need of a thorough revision of critical taxa and new character sets used for inferring neodiapsid relationships.

Anatomy of the Enigmatic Reptile Elachistosuchus huenei Janensch, 1949 (Reptilia: Diapsida) from the Upper Triassic of Germany and Its Relevance for the Origin of Sauria

PubMed Central

2015-01-01

The holotype and only known specimen of the enigmatic small reptile Elachistosuchus huenei Janensch, 1949 from the Upper Triassic (Norian) Arnstadt Formation of Saxony-Anhalt (Germany) is redescribed using μCT scans of the material. This re-examination revealed new information on the morphology of this taxon, including previously unknown parts of the skeleton such as the palate, braincase, and shoulder girdle. Elachistosuchus is diagnosed especially by the presence of the posterolateral process of the frontal, the extension of the maxillary tooth row to the posterior margin of the orbit, the free posterior process of the jugal, and the notched anterior margin of the interclavicle. Phylogenetic analyses using two recently published character-taxon matrices recovered conflicting results for the phylogenetic position of Elachistosuchus–either as an archosauromorph, as a lepidosauromorph or as a more basal, non-saurian diapsid. These different placements highlight the need of a thorough revision of critical taxa and new character sets used for inferring neodiapsid relationships. PMID:26352985

Influence of the expansion screw height on the dental effects of the hyrax expander: a study with finite elements.

PubMed

Araugio, Rafael Marques de Sousa; Landre, Jánes; Silva, Diana de Lourdes Almeida; Pacheco, Wellington; Pithon, Matheus Melo; Oliveira, Dauro Douglas

2013-02-01

Our objective was to evaluate the influence of the expansion screw height of a hyrax expander on the degree of dental inclination during rapid maxillary expansion by using the finite element method. The hyrax expander and the maxillary arch were modeled by using Solidworks software (Dassault Systèmes, Paris, France). Three distinct finite element method models were created by simulating different screw heights relative to the plane that intersected the center of resistance of the maxillary first molars. These 3 relative positions were 10 mm below the maxillary first molars' center of resistance, at the same level as the maxillary first molars' center of resistance, and 10 mm above the maxillary first molars' center of resistance. The initial activation of the expanders was simulated, and tooth displacements for each finite element method model were registered in the buccolingual, corono-apical, and mesiodistal directions. The simulations tested showed that the 3 hyrax screw heights had different dental tipping tendencies. When the screw was simulated below the maxillary first molars' center of resistance, buccal tipping of the crowns and lingual tipping of the roots were registered. This tendency decreased when the screw was simulated at the same level as the maxillary first molars' center of resistance. However, when the screw was simulated above the maxillary first molars' center of resistance, the tipping tendency was inverted, with the crowns displaying lingual tipping and the roots displaying buccal tipping. These findings might explain the importance of carefully planning the height of the hyrax expander screw, since, depending on this position, different tooth movements can be achieved. From an orthopedic perspective, the ideal screw position might be slightly above the maxillary first molars' center of resistance; this would generate less dental tipping. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Immediate impact of rapid maxillary expansion on upper airway dimensions and on the quality of life of mouth breathers.

PubMed

Izuka, Edna Namiko; Feres, Murilo Fernando Neuppmann; Pignatari, Shirley Shizue Nagata

2015-01-01

To assess short-term tomographic changes in the upper airway dimensions and quality of life of mouth breathers after rapid maxillary expansion (RME). A total of 25 mouth breathers with maxillary atresia and a mean age of 10.5 years old were assessed by means of cone-beam computed tomography (CBCT) and a standardized quality of life questionnaire answered by patients' parents/legal guardians before and immediately after rapid maxillary expansion. Rapid maxillary expansion resulted in similar and significant expansion in the width of anterior (2.8 mm, p < 0.001) and posterior nasal floor (2.8 mm, p < 0.001). Although nasopharynx and nasal cavities airway volumes significantly increased (+1646.1 mm3, p < 0.001), oropharynx volume increase was not statistically significant (+1450.6 mm3, p = 0.066). The results of the quality of life questionnaire indicated that soon after rapid maxillary expansion, patients' respiratory symptoms significantly decreased in relation to their initial respiratory conditions. It is suggested that RME produces significant dimensional increase in the nasal cavity and nasopharynx. Additionally, it also positively impacts the quality of life of mouth-breathing patients with maxillary atresia.

The effects of uncinectomy and natural ostial dilatation on maxillary sinus ventilation: a clinical experimental study.

PubMed

Kutluhan, Ahmet; Şalvız, Mehti; Bozdemir, Kazım; Kanbak, Orhan; Ulu, Mustafa; Yalçıner, Gökhan; Bilgen, Akif Sinan

2011-04-01

The purpose of this study was to determine the effect of uncinectomy without sinusotomy and natural ostial dilatation on maxillary sinus ventilation in chronic rhinosinusitis. Twenty patients with chronic rhinosinusitis were included in this study. The patients were randomly divided into two groups. Group 1 consisted of patients with uncinectomy (n = 10), while group 2 was made up of patients treated with natural ostial dilatation (n = 10). The CO(2) tension and pressure levels of the maxillary sinus during inspiration and expiration phases were obtained and compared before and after the procedures within and between the groups. The mean CO(2) tension levels in both groups were significantly decreased after the procedures. The mean maxillary sinus pressure during inspiration was significantly decreased to a negative value after uncinectomy; however, no significant change was observed during expiration. There were no significant changes in maxillary sinus pressures after natural ostial dilatation procedure. Both uncinectomy and natural ostial dilatation seem to be equally effective in decreasing maxillary sinus pCO(2) levels. The effects of decreased maxillary sinus pressure during inspiration after uncinectomy on mucociliary clearance and development mechanisms of chronic rhinosinusitis seem to be worth investigating.

Oral Rehabilitation of a Severely Resorbed Edentulous Maxilla with Screwed-retained Hybrid Denture Using Cresco System: A Case Report

PubMed Central

Turkyilmaz, Ilser; Patel, Neal S.; McGlumphy, Edwin A.

2008-01-01

Due to the angulation of maxillary bone as the maxillary bone resorption occurs from a buccal to palatal direction, bucco-lingually tilted implant placement is more likely especially in the posterior maxilla. The aim of this paper was to present a case restored by using a maxillary hybrid denture using Cresco method. A 59-year-old woman with an edentulous maxilla and five missing mandibular teeth was referred for implant treatment. Six months after sinus lift operation, four mandibular implants and six maxillary implants were placed. Due to the bucco-lingual tilt of two implants, the Cresco method was chosen to fabricate the metal framework for the maxillary hybrid denture that was delivered four months after implant placement. The main advantages of the Cresco method are a perfectly passive framework fit and corrected screw access holes. All ten implants placed were considered successful at 1-year recall, and no screw access holes were seen in the buccal part of the maxillary acrylic teeth. It was concluded that such screw-retained maxillary hybrid denture using the Cresco method met the esthetic expectations of a highly demanding patient. PMID:19212552

Incomplete mobilization of the maxilla resulting in failed maxillary distraction: a case report.

PubMed

Alkan, Alper; Inal, Samet; Baş, Burcu; Ozer, Mete

2007-12-01

Maxillary distraction osteogenesis has become an accepted alternative method in the treatment of patients with severe maxillary hypoplasia in craniofacial syndromes and cleft-related deformities. Insufficient distraction, undesirable soft tissue changes, and occurrence of defective distraction vectors are among the potential complications of intraoral maxillary distraction osteogenesis. A 2-stage procedure combining maxillary advancement by distraction technique with genioplasty and mandibular setback surgery was planned to correct jaw deformities in a 22-year-old patient with severe maxillary retrusion, mandibular prognathism, and excessive lower facial height. In the first stage, osteotomies were performed and maxilla was lightly mobilized after down-fracture. Distractors were placed to the maxilla intraorally. During activation period, the maxilla rotated in a clockwise direction, producing a discrepancy between the planned and the actual vectors. Complete distraction was unsatisfactory and the complication was due to surgical technique. This case report presents the failure of maxillary distraction due to incomplete mobilization of the maxilla. Treatment of the case was achieved by the conventional osteotomy techniques at final operation. The maxilla was successfully advanced to the desired position producing good occlusion and an improved facial profile.

Unilateral advancement of the maxillary minor segment by distraction osteogenesis in patients with repaired unilateral cleft lip and palate: report of two cases.

PubMed

Kuroe, Kazuto; Iino, Shoichiro; Shomura, Kenji; Okubo, Akiro; Sugihara, Kazumasa; Ito, Gakuji

2003-05-01

Collapse of the maxillary minor segment with lateral crossbite is a common feature in patients with repaired unilateral cleft lip/palate because of maxillary alveolar bony defect and palatal scar tissue. Distraction osteogenesis (DOG) is an effective technique of lengthening and augmentation for bone and gingiva. This case report describes the effects of unilateral advancement of the maxillary minor segment by DOG in two patients with the repaired unilateral cleft lip/palate.

Expression and localization of c-ros oncogene along the human excurrent duct.

PubMed

Légaré, Christine; Sullivan, Robert

2004-09-01

Compared to other animals, the anatomy of the human epididymis appears unusual. The caput epididymis is composed mostly of efferent ducts with an undefined initial segment. The present study investigates the regionalization of c-ros in human epididymis by real-time quantitative RT-PCR, in situ hybridization and immunohistochemistry studies. C-ros gene encodes a receptor-type protein tyrosine kinase that is expressed in adult mice exclusively in the epithelial cells of the initial segment of the epididymis. Transgenic mice targeted for the c-ros gene lack the initial segment of the epididymis and are infertile. Real-time PCR analysis showed that c-ros mRNA is expressed all along the human epididymis with the exception of the proximal caput epididymidis, where c-ros transcript was undetectable. In situ hydridization revealed that c-ros transcript was strongly expressed by principal cells and to a lower level by basal cells. Immunohistochemical studies showed that c-ros protein distribution was similar to the transcript. These results showed that c-ros expression in the human epididymis differs from that in mice suggesting that the unusual morphology of the human epididymis may reflect species differences in gene expression along the excurrent duct.

CT Examination of Nose and Paranasal Sinuses of Egyptian Mummies and Three Distinct Human Population Groups: Anthropological and Clinical Implications.

PubMed

Márquez, Samuel; Lawson, William; Mowbray, Kenneth; Delman, Bradley N; Laitman, Jeffrey T

2015-06-01

The interaction of nasal morphology and climatic conditions has resulted in diverse hard- and soft-tissue configurations across human population groups. While the processes of skull pneumatization are not fully understood, the invasions of the paranasal sinuses [PNS] into the cranium have contributed to assorted morphologies. Human migratory patterns and the strong association with climatic variables through time and space may explain this diversity. This study examined four multiregional populations of which two are from Egypt but of widely divergent eras. Three Egyptian mummies [EG-M] from the middle kingdom were CT scanned providing a unique opportunity to investigate the status of PNS anatomy within a time frame from 1567 BCE to 600 CE and compare it to a contemporary Egyptian [EG] (n = 12) population. Dry skulls of Inuit [IT] (n = 10) and East African [EA] (n = 8) provide out-group comparisons, as one group represents an isolated geographic environment far different from that of Egypt and the other group inhabiting distinct environmental conditions albeit located within the same continent. Results showed EG-M and EG frontal sinus volumes were diminutive in size with no statistically significant difference between them. Maxillary sinus size values of EG-M and EG clustered together while IT and EA significantly differed from each other (P = 0.002). The multiregional groups exhibited population specific morphologies in their PNS anatomy. Ecogeographic localities revealed anatomical differences among IT and EA, while the potential time span of about 3,500 years produced only a negligible difference between the Egyptian groups. The small sample sizes incorporated into this research requires confirmation of the results by analyses of larger samples from each geographic region and with the integration of a larger group of Egyptian mummified remains. © 2015 Wiley Periodicals, Inc.

Patient specific CFD models of nasal airflow: overview of methods and challenges.

PubMed

Kim, Sung Kyun; Na, Yang; Kim, Jee-In; Chung, Seung-Kyu

2013-01-18

Respiratory physiology and pathology are strongly dependent on the airflow inside the nasal cavity. However, the nasal anatomy, which is characterized by complex airway channels and significant individual differences, is difficult to analyze. Thus, commonly adopted diagnostic tools have yielded limited success. Nevertheless, with the rapid advances in computer resources, there have been more elaborate attempts to correlate airflow characteristics in human nasal airways with the symptoms and functions of the nose by computational fluid dynamics study. Furthermore, the computed nasal geometry can be virtually modified to reflect predicted results of the proposed surgical technique. In this article, several computational fluid mechanics (CFD) issues on patient-specific three dimensional (3D) modeling of nasal cavity and clinical applications were reviewed in relation to the cases of deviated nasal septum (decision for surgery), turbinectomy, and maxillary sinus ventilation (simulated- and post-surgery). Clinical relevance of fluid mechanical parameters, such as nasal resistance, flow allocation, wall shear stress, heat/humidity/NO gas distributions, to the symptoms and surgical outcome were discussed. Absolute values of such parameters reported by many research groups were different each other due to individual difference of nasal anatomy, the methodology for 3D modeling and numerical grid, laminar/turbulent flow model in CFD code. But, the correlation of these parameters to symptoms and surgery outcome seems to be obvious in each research group with subject-specific models and its variations (virtual- and post-surgery models). For the more reliable, patient-specific, and objective tools for diagnosis and outcomes of nasal surgery by using CFD, the future challenges will be the standardizations on the methodology for creating 3D airway models and the CFD procedures. Copyright © 2012 Elsevier Ltd. All rights reserved.

Mandibular fracture patterns consistent with posterior maxillary fractures involving the posterior maxillary sinus, pterygoid plate or both: CT characteristics

PubMed Central

Sukegawa, S; Kanno, T; Fujita, G; Yamamoto, N; Furuki, Y; Michizawa, M

2014-01-01

Objectives: The aim of this study was to determine the incidence of posterior maxillary fractures involving the posterior maxillary sinus wall, pterygoid plate or both, unrelated to major midface fractures in patients with mandibular fractures, and to characterize associated fractures. Methods: A CT study was performed in patients with mandibular fractures to identify posterior maxillary fractures. Patients aged under 16 years, those with mandibular fractures involving only dentoalveolar components and those with concurrent major midfacial fractures were excluded. Results: 13 (6.7%) of 194 patients with mandibular fractures also had posterior maxillary fractures (case group). The injury pattern correlated with the external force directed to the lateral side of the mandible (p < 0.001), alcohol consumption (p = 0.049), the presence of multifocal fractures (p = 0.002) and the fracture regions in the symphysis/parasymphysis (p = 0.001) and the angle/ramus (p = 0.001). No significant difference between the case and non-case groups was seen for age, sex or cause of trauma. Non-displaced fractures in the ipsilateral posterior mandible occurred with significant frequency (p = 0.001) when the posterior maxillary fractures involved only the sinus. Conclusions: Mandibular fractures accompanied by posterior maxillary fractures are not rare. The finding of a unilateral posterior maxillary fracture on CT may aid the efficient radiological examination of the mandible based on possible patterns of associated fractures, as follows: in the ipsilateral posterior region as a direct fracture when the impact is a medially directed force, and in the symphysis/parasymphysis or contralateral condylar neck as an indirect fracture. PMID:24336313

The influence of resilient liner and clip attachments for bar-implant-retained mandibular overdentures on opposing maxillary ridge. A 5-year randomised clinical trial.

PubMed

Elsyad, M A; Ashmawy, T M; Faramawy, A G

2014-01-01

This study aimed to compare the influence of resilient liner and clip attachments for bar-implant-retained mandibular overdentures on opposing maxillary ridge after 5 years of denture wearing. Thirty edentulous male patients (mean age 62·5 years) received two implants in the anterior mandible after being allocated into two equal groups using balanced randomisation. After 3 months, implants were connected with resilient bars. New maxillary complete dentures were then constructed, and mandibular overdentures were retained to the bars with either clips (group I, GI) or silicone resilient liners (group II, GII). The prosthetic and soft tissue complications of the maxillary dentures were recorded 6 months (T6 m ), 1 year (T1), 3 years (T3) and 5 years (T5) after overdenture insertion. Traced rotational tomograms were used for measurements of maxillary alveolar bone loss. The proportional value between bone areas and areas of reference not subject to resorption was expressed as a ratio (R). Change in R immediately before (T0) and after 5 years (T5) of overdenture insertion was calculated. Maxillary denture relining times and frequency of flabby anterior maxillary ridge occurred significantly more often in GI compared with GII. The change of R in anterior part of maxilla was significantly higher than change of R in posterior part in both groups. GI showed significant resorption of anterior residual ridge compared with GII. Relining times and frequencies of flabby ridge were significantly correlated with change in R. Within the limitations of this study, resilient liner attachments for bar-implant-retained mandibular overdentures are associated with decreased resorption and flabbiness of maxillary anterior residual ridge and fewer maxillary denture relining times when compared with clip attachments. © 2013 John Wiley & Sons Ltd.

Distraction Osteogenesis Maxillary Expansion (DOME) for Adult Obstructive Sleep Apnea Patients with High Arched Palate.

PubMed

Liu, Stanley Yung-Chuan; Guilleminault, Christian; Huon, Leh-Kiong; Yoon, Audrey

2017-08-01

A narrow maxilla with high arched palate characterizes a phenotype of obstructive sleep apnea (OSA) patients that is associated with increased nasal resistance and posterior tongue displacement. Current maxillary expansion techniques for adults are designed to correct dentofacial deformity. We describe distraction osteogenesis maxillary expansion (DOME) tailored to adult patients with OSA with narrow nasal floor and high arched palate without soft tissue redundancy. DOME is performed with placement of maxillary expanders secured by mini-implants along the midpalatal suture. This minimizes the maxillary osteotomies necessary to re-create sutural separation for reliable expansion at the nasal floor and palatal vault. We report the safety and efficacy profile of the first 20 patients at Stanford who underwent DOME.

Clinical effectiveness of late maxillary protraction in cleft lip and palate: a methods paper

PubMed Central

Lee, MK; Lane, C; Azeredo, F; Landsberger, M; Kapadia, H; Sheller, B; Yen, SL

2017-01-01

Objectives A prospective parallel cohort trial was conducted to compare outcomes of patients treated with maxillary protraction vs. LeFort 1 maxillary advancement surgery. Setting and Sample Population The primary site for the clinical trial is Children’s Hospital Los Angeles; the satellite test site is Seattle Children’s Hospital. All patients have isolated cleft lip and palate and a skeletal Class III malocclusion. Material & Methods A total of 50 patients, ages 11–14 will be recruited for the maxillary protraction cohort. The maxillary surgery cohort consists of 50 patients, ages 16–21, who will undergo LeFort 1 maxillary advancement surgery. Patients with additional medical or cognitive handicaps were excluded from the study. Results Current recruitment of patients is on track to complete the study within the proposed recruitment period. Conclusion This observational trial is collecting information that will examine dental, skeletal, financial, and quality of life issues from both research cohorts. PMID:28643931

Maxillary Expansion and Mandibular Setback Surgery With and Without Mandibular Anterior Segment Osteotomy to Correct Mandibular Prognathism With Obstructive Sleep Apnea.

PubMed

Han, Jeong Joon; Hong, Dong Hwan; Hwang, Soon Jung

2017-05-01

Mandibular prognathism is usually treated with mandibular setback surgery. However, this approach reduces the pharyngeal airway space, and can aggravate obstructive phenomena in patients with obstructive sleep apnea (OSA). While maxillary expansion is known to lead to an increase in the pharyngeal airway volume (PAS), its effect on the PAS in mandibular setback surgery has not yet been reported. The authors report a surgical approach with maxillary expansion in 2 patients with mandibular prognathism that was accompanied by OSA: maxillary midsagittal expansion with minimum maxillary advancement and minor mandibular setback without mandibular anterior segmental osteotomy (ASO) or major mandibular setback with mandibular ASO. Preoperative and postoperative computed tomography and polysomnography indicated that OSA was improved and pharyngeal airway space was increased or sustained, and the prognathic profile could be corrected to an acceptable facial esthetic profile. In summary, maxillary transversal expansion and mandibular setback with or without mandibular ASO can be successfully applied to treat mandibular prognathism with OSA.

Posterior Open Bite Due to Failure of Maxillary Molar Eruption.

PubMed

Yasumura, Toshihiko; Sueishi, Kenji

2016-01-01

Posterior open bite can cause problems with occlusion. It arises from systemic or local factors such as physical or functional interference, ankylosis, and failure of eruption. Primary failure of eruption (PFE) is a rare condition that is difficult to differentiate from ankylosis and requires complex treatment strategies. Here we report a 12-year-old girl who was referred to our hospital by her dentist for re-evaluation of eruption failure of the left maxillary secondary premolar and first and second molars with congenitally missing maxillary lateral teeth. The maxillary first molar was extracted for a therapeutic diagnosis. The left maxillary secondary premolar and second molar reacted well to subsequent orthodontic treatment. Auto-transplantation of the mandibular premolar to the maxil-lary arch was carried out to achieve optimal overjet, overbite, and occlusion. The active treatment period spanned 4 years and 1 month. Assessment of the patient's medical and dental history, prior trauma, and clinical conditions resulted in a therapeutic diagnosis of PFE. Satisfactory orthodontic treatment results were achieved.

Effect of Attachment Type on Denture Strain in Maxillary Implant Overdentures: Part 1. Overdenture with Palate.

PubMed

Takahashi, Toshihito; Gonda, Tomoya; Maeda, Yoshinobu

This study examined the effects of attachments on strain in maxillary implant overdentures supported by two or four implants. A maxillary edentulous model with implants inserted into anterior, premolar, and molar areas was fabricated, and three types of unsplinted attachments-ball, locator, and magnet-were set on the implants distributed under various conditions. Maxillary experimental dentures were fabricated, and two strain gauges were attached at the anterior midline on the labial and palatal sides. A vertical occlusal load of 98 N was applied and shear strain of the dentures was measured. On both sides, magnet attachments resulted in the lowest shear strain, while ball attachments resulted in the highest shear strain under most conditions. However, differences in shear strain among the three attachment types were not significant when supported by four implants, especially molar implants. Shear strain of the maxillary implant overdenture was lowest when using magnet attachments. Magnet attachments mounted on four implants are recommended to prevent denture complications when using maxillary implant overdentures.

Effect of maxillary distraction osteogenesis on velopharyngeal function: a pilot study.

PubMed

Harada, Kiyoshi; Ishii, Yoshimasa; Ishii, Masatoshi; Imaizumi, Humiko; Mibu, Michiko; Omura, Ken

2002-05-01

The purpose of this study was to examine preoperative and postoperative changes of velopharyngeal function in cleft patients who underwent maxillary distraction osteogenesis using the Rigid External Distraction System. Six cleft patients followed for a minimum of 12 months after maxillary distraction were examined. Plain and contrast lateral-cephalograms were obtained preoperatively and postoperatively, and speech evaluation was performed by the same authorized speech therapist at the same time points. The mean distraction amount at the anterior nasal spine was 11.7 mm (range, 7.4 mm - 15.0 mm). Both the nasopharyngeal depth and velar length increased after maxillary distraction, but the need ratio (nasopharyngeal depth/velar length) also increased after distraction. Although scores for velopharyngeal closure dropped a few points after maxillary distraction, the rating for hypernasality remained unchanged in all patients but the patient whose distraction amount was 15.0 mm. These results suggest that maxillary distraction of less than 15 mm may not markedly affect velopharyngeal function in cleft patients.

Jaw In A Day™ – State of the Art in Maxillary Reconstruction

PubMed Central

Runyan, Christopher M.; Sharma, Vishal; Staffenberg, David A.; Levine, Jamie P.; Brecht, Lawrence E.; Wexler, Leonard H.; Hirsch, David L.

2017-01-01

Background Reconstruction of maxillary defects following tumor extirpation is challenging because of combined aesthetic and functional roles of the maxilla. One-stage reconstruction combining osseous free flaps with immediate osseointegrated implants are becoming the standard for mandibular defects, and have similar potential for maxillary reconstruction. Methods A woman with maxillary Ewing’s sarcoma successfully treated at age nine with neoadjuvant chemotherapy, right hemi-maxillectomy and obturator prosthetic reconstruction presented for definitive reconstruction, complaining of poor obturator fit and hypernasality. Her reconstruction was computer-simulated by a multi-disciplinary team, consisting of left hemi-Lefort I advancement and right maxillary reconstruction with a free fibula flap with immediate osseointegrated implants and dental prosthesis. Results Full dental restoration, midface projection and oral fistula corrections were achieved in one operative stage using this approach. Conclusions This case demonstrates a successful approach for maxillary reconstruction using computer-planned orthognathic surgery with free fibula reconstruction and immediate osseointegrated implants with dental prosthesis. PMID:28005762

Exophthalmos associated to orbital zygomatic mucocele and complex maxillary malformation in a puppy

PubMed Central

Cirla, Alessandro; Rondena, Marco; Bertolini, Giovanna; Barsotti, Giovanni

2017-01-01

A case of exophthalmos due to zygomatic mucocele in a puppy with ipsilateral segmental maxillary atrophy is reported. A 7-month-old, mixed breed, male dog suffered the sudden-onset of unilateral painful exophthalmos and a gradual swelling of the right temporal region. A compressing, right retrobulbar mass was observed by ultrasound. Computed tomography revealed a large multiloculated cyst-like lesion of the right zygomatic gland projecting into the orbital space, thus displacing the eyeball. The ipsilateral molar part of the maxillary bone was underdeveloped, besides showing crowded, abnormal, multiple, unerupted maxillary molar teeth in the caudal maxillary region. Modified lateral orbitotomy and a selective caudal maxillary bone access were performed. The cyst-like lesion was removed and the zygomatic gland and the wall was collected for histology, which confirmed the mucocele. Clinical and imaging examinations six months after surgery showed neither recurrence of the mucocele nor ocular abnormalities. A possible common pathogenic mechanism involving these two conditions could be hypothesized. PMID:28884074

Primary paranasal sinus hyalinizing clear cell carcinoma: a case report.

PubMed

AlAli, Batool M; Alyousef, Mohammed J; Kamel, Ahmad Salah; Al Hamad, Mohammad A; Al-Bar, Mohammad H; Algowiez, Roaa M

2017-09-25

Hyalinizing clear cell carcinoma (HCCC) is a rare low-grade tumour of salivary glands that was first described as a distinct entity in 1994 by Milchgrub et al. EWSR1-ATF1 fusion was found to be specific for this tumour. The majority of the reported cases of HCCC arise from minor salivary glands within the oral cavity. Primary HCCC of the paranasal sinus is extremely uncommon. To our knowledge, only three cases have been reported in the English literature. Herein, we present a case of HCCC of the posterior ethmoid/maxillary sinus. A 63-year-old lady who presented with a long history of epistaxis. CT scan revealed a destructive mass in the left ethmoid/posterior maxillary sinus extending to the nasal cavity. Surgical excision was done and microscopic evaluation showed a tumour composed mainly of nests of clear epithelial cells separated by fibrocellular and hyalinized septa with extensive bone destruction. The tumour cells expressed CK5/6, EMA and p63 immunohistochemically but were negative for S100 protein, PAX-8, RCC and CK7. Sinonasal renal cell-like adenocarcinomas, myoepithelial carcinoma and metastatic renal cell carcinoma were excluded by radiological and immunohistochemical studies. Fluorescence in situ hybridization analysis revealed an EWSR1 gene rearrangement. Postoperative radiation was administrated and the patient did not show recurrence or distant metastasis 4 months after the surgery. Head and neck region have many tumours that demonstrate clear cell changes on histology. Thus, the differential diagnosis for HCCC is wide. Awareness of this rare entity and the possibility of it is arising in unusual location is necessary. EWSR1-AFT1 fusion, a consistent finding in HCCC, can be used to confirm the diagnosis.

Preoperative Cleft Lip Measurements and Maxillary Growth in Patients With Unilateral Cleft Lip and Palate.

PubMed

Antonarakis, Gregory S; Tompson, Bryan D; Fisher, David M

2016-11-01

Maxillary growth in patients with cleft lip and palate is highly variable. The authors' aim was to investigate associations between preoperative cleft lip measurements and maxillary growth determined cephalometrically in patients with complete unilateral cleft lip and palate (cUCLP). Retrospective cross-sectional study. Children with cUCLP. Preoperative cleft lip measurements were made at the time of primary cheiloplasty and available for each patient. Maxillary growth was evaluated on lateral cephalometric radiographs taken prior to any orthodontic treatment and alveolar bone grafting (8.5 ± 0.7 years). The presence of associations between preoperative cleft lip measurements and cephalometric measures of maxillary growth was determined using regression analyses. In the 58 patients included in the study, the cleft lateral lip element was deficient in height in 90% and in transverse width in 81% of patients. There was an inverse correlation between cleft lateral lip height and transverse width with a β coefficient of -0.382 (P = .003). Patients with a more deficient cleft lateral lip height displayed a shorter maxillary length (β coefficient = 0.336; P = .010), a less protruded maxilla (β coefficient = .334; P = .008), and a shorter anterior maxillary height (β coefficient = 0.306; P = .020) than those with a less deficient cleft lateral lip height. Patients with cUCLP present with varying degrees of lateral lip hypoplasia. Preoperative measures of lateral lip deficiency are related to later observed deficiencies of maxillary length, protrusion, and height.

Three-dimensional alterations in pharyngeal airway and maxillary sinus volumes in Class III maxillary deficiency subjects undergoing orthopedic facemask treatment.

PubMed

Pamporakis, Paschalis; Nevzatoğlu, Şirin; Küçükkeleş, Nazan

2014-07-01

To assess short-term alterations in the volume of pharyngeal airway space and maxillary sinuses associated with rapid maxillary expansion (RME) and facemask (FM) use in growing Class III maxillary-deficient patients. Twenty-two patients (14 girls, eight boys) treated with the RME/FM and having pretreatment and posttreatment cone beam-computed tomographic scans were identified from the archives of the Marmara University, Department of Orthodontics. According to the protraction force that was used, they were divided into two groups: a group with 400 g protraction force (12 subjects) and a group with 800 g protraction force (10 subjects). Mean age for the study group was 10 years. All patients were diagnosed with normal/low vertical growth pattern, maxillary deficiency, and normal mandible. No control group was available for this study. For each patient, a hyrax expansion screw with acrylic cap splint was constructed and RME was performed for 10 days. On the seventh day, protraction with a FM started. The results showed a statistically significant increase in the volume of maxillary sinuses after treatment, which was related to the growth. On the other hand, the increase in the volume of pharyngeal airway was not statistically significant. RME/FM treatment did not affect at all the volume of maxillary sinuses and actually inhibited the normal expected increase of the volume of the pharynx when compared with a control group comprising normal individuals.

Perpendicular serial maxillary distraction osteogenesis in cleft lip and palate patients

PubMed Central

Ylikontiola, Leena P.; Sándor, George K.; Harila, Virpi

2015-01-01

Background: Cleft lip and palate patients often have a retruded maxilla with a severely narrowed deficient maxillary arch. This report aims to describe the management of severe maxillary retrusion and constriction in cleft lip and palate patients using distraction osteogenesis applied in serial sequence in two directions perpendicular to each other. Materials and Methods: Two adult male cleft lip and palate patients were treated with maxillary distraction osteogenesis in two stages. In the first stage, surgically assisted rapid palatal expansion with a tooth-borne device was performed to significantly expand the maxillary arch in the transverse dimension. After the teeth were orthodontically aligned, the horizontal distraction of the maxilla was made by two internal maxillary distraction devices. Results: In the first patient, the maxilla was initially widened by 11 mm and then distracted forward by 20 mm. Despite the breakage of the shaft of one of the two distractors at the end of distraction, a satisfactory occlusion was found at the time of distractor device removal. The maxillary position has remained stable through 8 years of follow-up. In the second patient, the palate was widened by 14 mm and the maxilla was distracted forward by 22 mm. The maxillary position has remained stable through 3 years of follow-up. Conclusion: Sequential serial distraction of maxilla in two planes perpendicular to each other is a safe and stable approach for the treatment of cleft lip and palate patients with severe transverse and anteroposterior discrepancies. PMID:26981462

Perpendicular serial maxillary distraction osteogenesis in cleft lip and palate patients.

PubMed

Ylikontiola, Leena P; Sándor, George K; Harila, Virpi

2015-01-01

Cleft lip and palate patients often have a retruded maxilla with a severely narrowed deficient maxillary arch. This report aims to describe the management of severe maxillary retrusion and constriction in cleft lip and palate patients using distraction osteogenesis applied in serial sequence in two directions perpendicular to each other. Two adult male cleft lip and palate patients were treated with maxillary distraction osteogenesis in two stages. In the first stage, surgically assisted rapid palatal expansion with a tooth-borne device was performed to significantly expand the maxillary arch in the transverse dimension. After the teeth were orthodontically aligned, the horizontal distraction of the maxilla was made by two internal maxillary distraction devices. In the first patient, the maxilla was initially widened by 11 mm and then distracted forward by 20 mm. Despite the breakage of the shaft of one of the two distractors at the end of distraction, a satisfactory occlusion was found at the time of distractor device removal. The maxillary position has remained stable through 8 years of follow-up. In the second patient, the palate was widened by 14 mm and the maxilla was distracted forward by 22 mm. The maxillary position has remained stable through 3 years of follow-up. Sequential serial distraction of maxilla in two planes perpendicular to each other is a safe and stable approach for the treatment of cleft lip and palate patients with severe transverse and anteroposterior discrepancies.

Dissecting aneurysms of posterior communicating artery itself: anatomical, diagnostic, clinical, and therapeutical considerations.

PubMed

Kocak, Burak; Tureci, Ercan; Kizilkilic, Osman; Islak, Civan; Kocer, Naci

2013-09-01

Posterior communicating artery (PCoA) itself is an unusual location for intracranial aneurysms in that isolated dissections or dissecting aneurysms are extremely rare. In the way of correct diagnosis of dissecting aneurysms of PCoA itself, a proper understanding of (1) the anatomy of the PCoA and its perforator branches, (2) some particular diagnostic features, and (3) related clinical aspects is of significant importance. Although there are no established treatment strategies for this particular type of aneurysms, the endovascular approach might be considered as a plausible one. In this paper, our scope was to report five cases with dissecting aneurysm of the PCoA itself and to discuss this rare vascular pathology from anatomical, diagnostic, clinical, and therapeutical perspectives.

A combined periodontal - prosthetic treatment approach to manage unusual gingival visibility in resting lip position and inversely inclined upper anterior teeth: a case report with discussion.

PubMed

Biniraj, K R; Janardhanan, Mahija; Sunil, M M; Sagir, Mohammed; Hariprasad, A; Paul, Tony P; Emmatty, Rishi

2015-03-01

Excessive gingival visibility during smile is a common esthetic complaint in dentistry, but excessive gingival visibility in resting lip position is relatively uncommon condition. Several exclusive radical to conservative surgical treatment or its combination with orthodontic therapy to treat this condition are within the reach of every patient nowadays. A case report of an excessive gingival visibility because of altered passive eruption along with inversely inclined maxillary anterior teeth is presented here. A relatively simple treatment approach combining periodontal and restorative therapy is used here to achieve the desirable aesthetic results. The gingival exposure resulting from altered passive eruption was completely managed by a gingivectomy, but the inclined appearance of teeth was still an aesthetic complaint. After complete healing of gingivectomy surgery, appropriately designed crowns were given to rectify the inversely inclined appearance. A complete rehabilitation of patient's smile could be achieved, the case was followed up for 3 years and the condition was found satisfactory.

Perioperative stroke in a patient undergoing surgery for oral cancer: A case report

PubMed Central

Sukegawa, Shintaro; Kanno, Takahiro; Kanai, Kengo; Mandai, Toshiko; Shibata, Akane; Takahashi, Yuka; Hirata, Yuji; Furuki, Yoshihiko

2016-01-01

Carotid artery stenosis is a significant risk factor for stroke. In elderly patients with carotid atherosclerosis and stenosis, it is not unusual for oral, head and neck cancer surgery to be performed. The present study describes a case of stroke that occurred during a neck dissection for the treatment of cervical lymph node metastasis of a left maxillary gingival carcinoma. The patient was an 84-year-old female who was considered to be at high risk of a stroke based on pre-operative head and neck computed tomography scans, which detected severe carotid atherosclerosis and stenosis. There was no possible stroke prophylaxis available during the performance of the neck dissection in the present case. However, if patients are evaluated to be high-risk pre-operatively, statin agents should be administered, the surgery should be carefully performed, adequate sedation should be maintained post-operatively and the patient should be followed up, aiming to achieve the early detection of a possible stroke. PMID:27698839

Orthodontic management of bilateral maxillary canine-first premolar transposition and bilateral agenesis of maxillary lateral incisors: a case report.

PubMed

Di Palma, Elena; Di Giuseppe, Biagio; Tepedino, Michele; Chimenti, Claudio

2015-01-01

Maxillary canine-first premolar transposition (Mx.C.P1) is an uncommon dental positional anomaly that may create many orthodontic problems from both esthetic and functional points of view. In this report we show the orthodontic management of a case of Mx.C.P1 associated with bilateral maxillary lateral incisor agenesis and unilateral mandibular second premolar agenesis The patient was treated with a multibracket appliance and the extraction of the lower premolar. treatment was completed without the need for any prosthetic replacement.

Dual odontogenic origins develop at the early stage of rat maxillary incisor development.

PubMed

Kriangkrai, Rungarun; Iseki, Sachiko; Eto, Kazuhiro; Chareonvit, Suconta

2006-03-01

Developmental process of rat maxillary incisor has been studied through histological analysis and investigation of tooth-related gene expression patterns at initial tooth development. The tooth-related genes studied here are fibroblast growth factor-8 (Fgf-8), pituitary homeobox gene-2 (Pitx-2), sonic hedgehog (Shh), muscle segment homeobox-1 (Msx-1), paired box-9 (Pax-9) and bone morphogenetic protein-4 (Bmp-4). The genes are expressed in oral epithelium and/or ectomesenchyme at the stage of epithelial thickening to the early bud stage of tooth development. Both the histological observation and tooth-related gene expression patterns during early stage of maxillary incisor development demonstrate that dual odontogenic origins aligned medio-laterally in the medial nasal process develop, subsequently only single functional maxillary incisor dental placode forms. The cascade of tooth-related gene expression patterns in rat maxillary incisor studied here is quite similar to those of the previous studies in mouse mandibular molar, even though the origins of oral epithelium and ectomesenchyme involved in development of maxillary incisor and mandibular molar are different. Thus, we conclude that maxillary incisor and mandibular molar share a similar signaling control of Fgf-8, Pitx-2, Shh, Msx-1, Pax-9 and Bmp-4 genes at the stage of oral epithelial thickening to the early bud stage of tooth development.

Velopharyngeal changes after maxillary distraction in cleft patients using a rigid external distraction device: A retrospective study.

PubMed

Taha, Mahasen; Elsheikh, Yasser M

2016-11-01

 To evaluate early and late velopharyngeal changes in cleft lip and palate (CLP) patients after use of the Rigid External Distractor (RED) device and to correlate these changes to the amount of maxillary advancement.  Thirty Class III CLP patients were included in the study. Maxillary advancement was performed using the RED device in combination with titanium miniplates and screws for anchorage. Lateral cephalograms, nasometer, and nasopharyngoscope records were taken before distraction, immediately after distraction, and 1 year after distraction. A paired t-test was used to detect differences at P < .05.  SNA angle and A point and ANS to Y axis were significantly increased after maxillary distraction (P  =  .0001). Statistically significant increases in nasopharyngeal and oropharyngeal depths, velar angle, and need ratio were also found (P  =  .0001). Nasalance scores showed a significant increase (P  =  .008 for nasal text and .044 for oral text). A significant positive correlation was observed between the amount of maxillary advancement and the increase in nasopharyngeal depth and hypernasality (P  =  .012 and .026, respectively).  Nasopharyngeal function was deteriorated after maxillary advancement in CLP patients. There was a significant positive correlation between the amount of maxillary advancement and the increase in nasopharyngeal depth and hypernasality.

Long-term results of maxillary distraction osteogenesis in nongrowing cleft: 5-years experience using internal device.

PubMed

Hirjak, D; Reyneke, J P; Janec, J; Beno, M; Kupcova, I

2016-01-01

Patients with cleft lip and palate (CLP) related deformities frequently have maxillary hypoplasia in all dimensions. These patients usually present with class III malocclusions, retruded midfaces and narrow hard palates. The skeletal problems can be treated by means of Le Fort I maxillary procedures. Surgical and orthodontic correction of severe maxillary hypoplasia, as often seen in CLP patients, has however proved to be challenging. The magnitude of the advancement is often hampered and the post operative stability significantly affected by palatal soft tissue scarring. The slow distraction of bone and the histogenic abilities of distraction osteogenesis (DO) have made it an atractive alternative treatment option for the management of maxillary hypoplasia in these patients. This paper presents the treatment results of 15 nongrowing CLP patients with severe maxillary hypoplasia treated by means of intra oral distraction. The mean anterior distraction of the maxillas was 12.7 mm (9-15.0 mm). The long-term cephalometric and clinical evaluation after a minimum of 60 months (mean follow-up 71 months) proved to be stable. The treatment results revealed, that distraction osteogenesis in nongrowing CLP patients with severe maxillary hypoplasia proved to be a predictable and stable option (Tab. 2, Fig. 3, Ref. 26).

[Effects of maxillary distraction osteogenesis on the velopharyngeal configuration of cleft palate patients].

PubMed

Wang, Xiao-xia; Wang, Xing; Yi, Biao; Li, Zi-li; Liang, Cheng

2005-12-18

To study the effects of internal maxillary distraction osteogenesis(DO) on the velopharyngeal configuration of cleft palate patients. Ten patients with severe maxillary hypoplasia secondary to cleft lip and palate patients (7 males and 3 females, average age 20.1 years old) had undertaken high step LeFort I osteotomy, and internal maxillary distraction devices were applied to advance the maxilla. Before surgery, when DO was completed and 6 months after DO was completed, oriented lateral cephalograms at rest position of each patient were taken, and 6 measure indexes of velopharyngeal configuration were collected and analyzed. All patients had successfully accomplished maxillary DO and the maxilla had been averagely advanced 11.3 mm. PNS-PhW, C-PhW, UL and ANS-PNS-T had all significantly increased, and UD had significantly decreased when DO was completed and 6 months after DO was completed as compared with pre-surgery. No significant linear correlation was found between maxilla advancement distance and velopharyngeal configuration changes. Correction of maxillary hypoplasia secondary to cleft palate surgery by using internal maxillary DO can increase the velopharyngeal cavity depth, and may impair velopharyngeal competence, but the compensatory changes of velopharyngeal soft tissue can alleviate this impairment to certain extent.

Prosthetic implant treatment of the edentulous maxilla with overdenture.

PubMed

Inversini, M

2006-10-01

The literature concerning the success of prosthetic implant treatment with maxillary overdenture is reviewed, and variables affecting treatment from the implant and prosthetic standpoint are analysed. Guidelines for the fabrication of maxillary overimplants comparable to those for mandibular overimplants are still lacking, as are evidence-based prosthetic design concepts. Individual methods and techniques have been described, but evaluation standards for the outcome of maxillary prosthetic-implant treatment are lacking or individually interpreted. The biomechanics involved in the proposed system are described, together with the advantages of telescopic crowns for the retention of removable partial prosthesis supported by maxillary implants. The positive influence, in terms of long-term prognosis, of the perio-protective design of removable partial prostheses supported by maxillary overimplants is also discussed. The proposed system not only provides stability, support and retention for removable partial prostheses supported by maxillary implants, but also enables implant survival rates to be improved, both for biomechanical reasons and due to improved oral hygiene. The simplification of fabrication procedures, repair, rebasing and re-operating also reduce the cost of follow-up and improve the cost/benefit ratio. However, additional studies are needed to clarify the number and most appropriate distribution of implants, as well as the most favourable prosthetic designs for maxillary overimplants.

Variation in Size and Form between Left and Right Maxillary Central Incisor Teeth.

PubMed

Vadavadagi, Suneel V; Hombesh, M N; Choudhury, Gopal Krishna; Deshpande, Sumith; Anusha, C V; Murthy, D Kiran

2015-02-01

To compare the variation in size of left and right maxillary central incisors for male patients (using digital calipers of 0.01 mm accuracy). To compare the variation in size of left and right maxillary central incisors for female patients (using digital calipers of 0.01 mm accuracy). To find out the difference between the maxillary central incisors of men and women. Its clinical applicability if difference exists. A total of 70 dental students of PMNM Dental College and Hospital were selected. Of 70 dental students, 40 male and 30 female were selected. Impressions were made for all subjects, using irreversible hydrocolloid (Algitex, manufacturer DPI, Batch-T-8804) using perforated stock metal trays. The mesiodistal crown width and cervical width were measured for each incisor and recorded separately for left and right teeth. The length was measured for each incisor and recorded separately for left and right maxillary central incisor using digitec height caliper. The mean value of maximum crown length of maxillary left central incisor of male was greater in length compared with maxillary right central incisor. Mean value of maximum crown length for male patient right and left side was greater compared with maximum crown length of female patient. When compared the dimensions of teeth between two sex, male group shows larger values to female group.

Comparison of maxillary anterior tooth width and facial dimensions of 3 ethnicities.

PubMed

Parciak, Ewa C; Dahiya, Ankur T; AlRumaih, Hamad S; Kattadiyil, Mathew T; Baba, Nadim Z; Goodacre, Charles J

2017-10-01

As the cosmetic demands of patients increase, determining the appropriate dimensions of the maxillary anterior teeth has become increasingly relevant. The relationship between facial measurements and tooth size provide guidance for maxillary anterior tooth size selection. However, most publications on this topic have focused on the white population, and more data for tooth sizes and their proportions in other ethnicities are needed. The purpose of this observational study was to investigate the relationship between the mesiodistal dimensions of the 6 maxillary anterior teeth and the bizygomatic width, interpupillary distance, intercanthal distance, interalar width, and intercommissural width of individuals of Asian, African-American, and white ethnicities. Standardized digital images of 360 participants (120 Asian, 120 African-American, and 120 white) were used to measure facial segments. Individual dimensions of the 6 maxillary anterior teeth were measured using stone casts with digital sliding caliper. The combined width of the 6 maxillary anterior teeth on a straight line corresponded to the sum of the anterior tooth width. The means and standard deviations from descriptive measurements were calculated and analyzed for face and maxillary anterior tooth ratios and correlations. Statistical analysis was done using the Kruskal-Wallis procedure to compare facial and tooth parameters among the 3 ethnicities. Appropriate post hoc comparisons that adjusted for multiple testing were conducted when warranted (α=.05). The Spearman rho correlation, a nonparametric correlate of the Pearson correlation, was used to associate the facial and tooth parameters within the strata of sex and ethnicity. No consistent ratios were found among the examined facial dimensions and the mesiodistal dimensions of the 6 maxillary anterior teeth among the 3 ethnicities, except for the central incisor width-to-bizygomatic width ratio. No correlations were found between the facial dimensions and mesiodistal dimensions of the 6 maxillary anterior teeth among the 3 ethnicities except in Asian women. For Asian women, the intercommissural width correlated with the width of the central incisor (P=.001), the width of 2 central incisors (P=.001), the width of 4 incisors (P=.003), and the width of 6 maxillary anterior teeth (P=.005). No facial proportions by which the exact width of maxillary anterior teeth could be predicted were found in Asian, African-American, or white populations. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

An Assessment of Curve of Spee in Healthy Human Permanent Dentitions: A Cross Sectional Analytical Study in a Group of Young Indian Population.

PubMed

Krishnamurthy, Sushma; Hallikerimath, Rajendra B; Mandroli, Praveenkumar S

2017-01-01

An awareness of the standard value of the maxillary and the mandibular curves of Spee may aid the clinician in developing occlusion in the sagittal plane and would be useful when providing prosthetic rehabilitation for patients with occlusal derangement. To assess and compare the radius and depth of curve of Spee in maxillary and mandibular arches in men and women, in a group of young Indian population. The study cohort consisted of 25 men and 25 women between 19 to 24 years. Impression of maxillary and mandibular arches were made with alginate. Casts were poured in die stone. Standardized digital pictures of the right side of maxillary and mandibular dental casts were made with a digital camera and transferred to a computer. Tips of the distal cusps of molars, premolars and canines of the maxilla and mandible were located. The radius and the depth of the curve of Spee were measured from the digital photographs of dental casts, with the help of 'dimension tool' in the computer software (Corel DRAW X5). Mann-Whitney test was used to analyze the difference in the curve of Spee between men and women and the difference between maxillary and mandibular arches. The mean values were as follows: a) Men: Radii of curve of Spee in the maxillary and mandibular arch were 140.22±65.98 and 109.67±46.80 respectively; depths of curve of Spee in maxillary and mandibular arch were 1.65±0.67 and 1.49±0.74 respectively; b) Women: Radii of curve of Spee in the maxillary and mandibular arch were 120.58±63.91 and 98.31±63.59 respectively; depths of curve of Spee in maxillary and mandibular arch were 1.45±0.54 and 1.40±0.61 respectively. In the mandibular arch, the difference in the radii (p=0.0467) was statistically significant between men and women. In women, the difference in radii (p=0.0467) between maxillary and mandibular arches was statistically significant. The radii and depths of curve of Spee were larger in maxillary than mandibular arches in both men and women. Also, the difference in the radii of mandibular arch was statistically significant between men and women.

Structure and enzyme expression in photosynthetic organs of the atypical C4 grass Arundinella hirta.

PubMed

Wakayama, Masataka; Ohnishi, Jun-ichi; Ueno, Osamu

2006-05-01

In its leaf blade, Arundinella hirta has unusual Kranz cells that lie distant from the veins (distinctive cells; DCs), in addition to the usual Kranz units composed of concentric layers of mesophyll cells (MCs) and bundle sheath cells (BSCs; usual Kranz cells) surrounding the veins. We examined whether chlorophyllous organs other than leaf blades--namely, the leaf sheath, stem, scale leaf, and constituents of the spike--also have this unique anatomy and the C4 pattern of expression of photosynthetic enzymes. All the organs developed DCs to varying degrees, as well as BSCs. The stem, rachilla, and pedicel had C4-type anatomy with frequent occurrence of DCs, as in the leaf blade. The leaf sheath, glume, and scale leaf had a modified C4 anatomy with MCs more than two cells distant from the Kranz cells; DCs were relatively rare. An immunocytochemical study of C3 and C4 enzymes revealed that all the organs exhibited essentially the same C4 pattern of expression as in the leaf blade. In the scale leaf, however, intense expression of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) occurred in the MCs as well as in the BSCs and DCs. In the leaf sheath, the distant MCs also expressed Rubisco. In Arundinella hirta, it seems that the ratio of MC to Kranz cell volumes, and the distance from the Kranz cells, but not from the veins, affects the cellular expression of photosynthetic enzymes. We suggest that the main role of DCs is to keep a constant quantitative balance between the MCs and Kranz cells, which is a prerequisite for effective C4 pathway operation.

Mathematical beta function formulation for maxillary arch form prediction in normal occlusion population.

PubMed

Mina, Morteza; Borzabadi-Farahani, Ali; Tehranchi, Azita; Nouri, Mahtab; Younessian, Farnaz

2017-04-01

The aim of this study was to assess the dental arch curvature in subjects with normal occlusion in an Iranian population and propose a beta function formula to predict maxillary arch form using the mandibular intermolar widths (IMW) and intermolar depths (IMD). The materials used were study casts of 54 adolescents with normal occlusion and mean age of 14.1 years (25 males, 29 females, age range 12-16 years). Curve-fitting analyses were carried out and the curves passing through the facial-axis point of the canines, premolars, first molars, and the incisal edges of the anterior teeth were studied using a 3D laser scanner. Using the measured IMW and IMD of the dental arches at the maxillary and mandibular first molar region, a beta function formula proposed for predicting maxillary arch form. The accuracy of the proposed formula was assessed on 10 randomly selected dental casts. The mean (SD) of the maxillary and mandibular IMW and IMD were 57.92 (4.75), 54.19 (5.31), and 31.59 (2.90) and 28.10 (2.59) mm, respectively. There was no gender dimorphism (P > 0.05) for both variables (IMW, IMD). There was a strong positive association (n = 10, Pearson r = 0.98, P < 0.05) between the measured (actual) maxillary arch length and proposed arch length derived from generated formula. The goodness of fit (whole arch) for the proposed beta function formula, using adjusted r square measure and root mean square in 10 patients averaged 0.97 and 1.49 mm, respectively. The corresponding figures for the maxillary anterior arch (canine to canine) were 0.90 and 0.92 mm, respectively. The proposed beta function formula used for predicting maxillary arch form based on two mandibular measures (IMW, IMD) was found to have a high accuracy for maxillary arch prediction in the Iranian population and may be used as a guide to fabricate customized arch wires or as an aid in maxillary reconstructive surgery.

[Radiologic picture of maxillary sinus aspergilloma].

PubMed

Kaczmarek, I; Bilska, J; Osmola, K; Nowaczyk, M T

2010-06-01

Mycotic infection of paranasal sinus could be the etiological factor of chronic sinusitis. The increase in number of fungal sinusitis cases have been reported recently among nonimmunocompromised patient after endodontic treatment of maxillary teeth. Nonspecific clinical signs and incorrect radiologic pictures interpretation as well as loss of therapeutic standards seems to be the cause of false negative diagnosis and difficulties in treatment of fungal sinusitis. Clinical and radiological picture of maxillary sinus aspergillosis was described in this paper. In the period of 2006-2009 in the Department of Maxillo-Facial Surgery 19 patient with fungal maxillary sinusitis was treated. The endodontic treatment of maxillary teeth of the related side was performed previously in 80% examined cases. In 2 cases there were immunocompromised patients with immunosuppressive treatment. In 16 cases patients were referred to our Department due to metallic foreign body of the maxillary sinus. Routine diagnostic radiological imaging was performed in each case: paranasal sinus view--Water's view and panoramic radiograph (orthopantomograph). In 4 cases imaging was extended with computer tomography (CT) visualization. The surgical treatment was performed in each case. The final diagnosis was puted on histopathological examination and fungal culture. In 16 cases of analysed group histopathological examination and fungal culture revealed aspergilosis. In 2 cases fungal culture was negative, but histopathology slices confirm presence of hyphae of Aspergillus. In 1 case the root canal sealer was found in the maxillary sinus. In none case invasive form of aspergillosis was confirmed. In all cases Water's view of paranasal sinuses and ortopantomograph showed partially or totally clouded sinus with well-defined, single or multifocal radiopaque object similar to metallic foreign body. Characteristic finding in CT imaging was well-defined radiodence concretions that have been attributed to calcium deposits in inflammatory changed mucosa, that might suggest "foreign body" picture. In 1 to 3 years follow-up control there was a recurrence of symptoms in one case. Foreign body of maxillary sinus have to be differentiated with aspergilosis. Metallic "foreign body" view in maxillary sinus seems to be characteristic sign of aspergillosis. The most often form of maxillary sinus aspergilosis is aspergilloma.

Effects of pre-surgical nasoalveolar moulding on maxillary arch and nasal form in unilateral cleft lip and palate before lip surgery.

PubMed

Fuchigami, T; Kimura, N; Kibe, T; Tezuka, M; Amir, M S; Suga, H; Takemoto, Y; Hashiguchi, M; Maeda-Iino, A; Nakamura, N

2017-11-01

To investigate the effects of pre-surgical nasoalveolar moulding (PNAM) on the maxillary arch and nasal form in patients with unilateral cleft lip and palate (UCLP). This is a retrospective case series study. The subjects were infants with complete UCLP who were treated with PNAM (n = 18) at Kagoshima University Medical and Dental Hospital (Japan) between 2006 and 2013. Maxillary dental casts and facial photographs were taken at the time of the first visit and immediately prior to lip surgery to evaluate the maxillary arch and nasal form changes. The dental casts were scanned with a laser scanner, and changes in the 3-Dimensional coordinates of anatomical landmarks and alveolar cleft width were analysed. Moreover, we investigated the correlation between the changes in the maxillary alveolar arch and nasal form. Regarding the maxillary alveolar arch form, the anterior points of the major segment had moved significantly to the cleft side just prior to the time of lip repair, and the alveolar cleft width was significantly decreased. For nasal form, the inclination and displacement of the columella were significantly improved. The improvement of columella inclination was moderately correlated with the posterior movement of the anterior points of the major segment. These findings indicate that PNAM for infants with UCLP enhanced symmetry in the maxillary alveolar arch and nasolabial form. In addition, the posterior movement of the anterior points of the maxillary alveolar arch was correlated with the improvement of columella deformation. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Maxillary sinusitis and periapical abscess following periodontal therapy: a case report using three-dimensional evaluation.

PubMed

Huang, Chih-Hao; Brunsvold, Michael A

2006-01-01

Maxillary sinusitis may develop from the extension of periodontal disease. In this case, reconstructed three-dimensional images from multidetector spiral computed tomographs were helpful in evaluating periodontal bony defects and their relationship with the maxillary sinus. A 42-year-old woman in good general health presented with a chronic deep periodontal pocket on the palatal and interproximal aspects of tooth #14. Probing depths of the tooth ranged from 2 to 9 mm, and it exhibited a Class 1 mobility. Radiographs revealed a close relationship between the root apex and the maxillary sinus. The patient's periodontal diagnosis was localized severe chronic periodontitis. Treatment of the tooth consisted of cause-related therapy, surgical exploration, and bone grafting. A very deep circumferential bony defect at the palatal root of tooth #14 was noted during surgery. After the operation, the wound healed without incidence, but 10 days later, a maxillary sinusitis and periapical abscess developed. To control the infection, an evaluation of sinus and alveolus using computed tomographs was performed, systemic antibiotics were prescribed, and endodontic treatment was initiated. Two weeks after surgical treatment, the infection was relieved with the help of antibiotics and endodontic treatment. Bilateral bony communications between the maxillary sinus and periodontal bony defect of maxillary first molars were shown on three-dimensional computed tomographs. The digitally reconstructed images added valuable information for evaluating the periodontal defects. Three-dimensional images from spiral computed tomographs (CT) aided in evaluating and treating the close relationship between maxillary sinus disease and adjacent periodontal defects.

Maxillary complete denture outcome with two-implant supported mandibular overdentures. A systematic review.

PubMed

Rutkunas, Vygandas; Mizutani, Hiroshi; Peciuliene, Vytaute; Bendinskaite, Ruta; Linkevicius, Tomas

2008-01-01

Research data regarding maxillary complete denture outcome with two-implant supported mandibular overdentures are not consistent. Considering multiple publications on implant supported mandibular overdentures, it was decided to summarize currently present evidence on the maxillary complete dentures opposed by implant-supported mandibular overdentures, and analyze factors that could potentially influence the outcomes. The articles from 1985 to 2007 related to the topic were identified in the online MEDLINE/Pubmed and other databases and manually. Primary articles were scanned, and irrelevant studies were excluded from the further review process. Potentially relevant titles and abstracts were provisionally included for consideration on the basis of full text articles. Full text articles were obtained from on-line and printed sources. The data from the studies were extracted and reviewed. The study has failed to identify any prospective satisfying inclusion/exclusion criteria RCT reporting on maxillary bone resorption. The number of maxillary complete denture relining incidences per patient was constantly increasing during the 10-year period. Maxillary complete denture remake incidences comprised 16-33 % of the number of patients followed during the 10-year period. Comparing patient satisfaction with upper dentures at the baseline and after two years, no decrease in satisfaction was noticed. There is no evidence that maxillary ridge resorption is accelerated with certain types of two-implant supported mandibular overdenture attachments. Most common complication for the maxilla - prosthetic maintenance. There is a risk of decreased patient satisfaction with bar-supported mandibular overdenture. Further studies are needed to provide evidence for the maxillary complete denture outcome with two-implant supported mandibular overdentures.

Transverse Expansion and Stability after Segmental Le Fort I Osteotomy versus Surgically Assisted Rapid Maxillary Expansion: a Systematic Review

PubMed Central

Blæhr, Tue Lindberg

2016-01-01

ABSTRACT Objectives The objective of the present systematic review was to test the hypothesis of no difference in transverse skeletal and dental arch expansion and relapse after segmental Le Fort I osteotomy versus surgically assisted rapid maxillary expansion. Material and Methods A MEDLINE (PubMed), Embase and Cochrane library search in combination with a hand-search of relevant journals was conducted by including human studies published in English from January 1, 2000 to June 1, 2016. Results The search provided 130 titles and four studies fulfilled the inclusion criteria. All the included studies were characterized by high risk of bias and meta-analysis was not possible due to considerable variation. Both treatment modalities significantly increase the transverse maxillary skeletal and dental arch width. The transverse dental arch expansion and relapse seems to be substantial higher with tooth-borne surgically assisted rapid maxillary expansion compared to segmental Le Fort I osteotomy. The ratio of dental to skeletal relapse was significantly higher in the posterior maxilla with tooth-borne surgically assisted rapid maxillary expansion. Moreover, a parallel opening without segment tilting was observed after segmental Le Fort I osteotomy. Conclusions Maxillary transverse deficiency in adults can be treated successfully with both treatment modalities, although surgically assisted rapid maxillary expansion seems more effective when large transverse maxillary skeletal and dental arch expansion is required. However, considering the methodological limitations of the included studies, long-term randomized studies assessing transverse skeletal and dental expansion and relapse with the two treatment modalities are needed before definite conclusions can be provided. PMID:28154745

Three-dimensional analysis of maxillary changes associated with facemask and rapid maxillary expansion compared with bone anchored maxillary protraction

PubMed Central

Hino, Claudia Toyama; Cevidanes, Lucia H. S.; Nguyen, Tung T.; De Clerck, Hugo J.; Franchi, Lorenzo; McNamara, James A.

2014-01-01

Introduction Our objectives in this study were to evaluate in 3 dimensions the growth and treatment effects on the midface and the maxillary dentition produced by facemask therapy in association with rapid maxillary expansion (RME/FM) compared with bone-anchored maxillary protraction (BAMP). Methods Forty-six patients with Class III malocclusion were treated with either RME/FM (n = 21) or BAMP (n = 25). Three-dimensional models generated from cone-beam computed tomographic scans, taken before and after approximately 1 year of treatment, were registered on the anterior cranial base and measured using color-coded maps and semitransparent overlays. Results The skeletal changes in the maxilla and the right and left zygomas were on average 2.6 mm in the RME/FM group and 3.7 mm in the BAMP group; these were different statistically. Seven RME/FM patients and 4 BAMP patients had a predominantly vertical displacement of the maxilla. The dental changes at the maxillary incisors were on average 3.2 mm in the RME/FM group and 4.3 mm in the BAMP group. Ten RME/FM patients had greater dental compensations than skeletal changes. Conclusions This 3-dimensional study shows that orthopedic changes can be obtained with both RME/FM and BAMP treatments, with protraction of the maxilla and the zygomas. Approximately half of the RME/FM patients had greater dental than skeletal changes, and a third of the RME/FM compared with 17% of the BAMP patients had a predominantly vertical maxillary displacement. PMID:24182587

Evaluation of the rapid and slow maxillary expansion using cone-beam computed tomography: a randomized clinical trial

PubMed Central

Pereira, Juliana da S.; Jacob, Helder B.; Locks, Arno; Brunetto, Mauricio; Ribeiro, Gerson L. U.

2017-01-01

ABSTRACT OBJECTIVE: The aim of this randomized clinical trial was to evaluate the dental, dentoalveolar, and skeletal changes occurring right after the rapid maxillary expansion (RME) and slow maxillary expansion (SME) treatment using Haas-type expander. METHODS: All subjects performed cone-beam computed tomography (CBCT) before installation of expanders (T1) and right after screw stabilization (T2). Patients who did not follow the research parameters were excluded. The final sample resulted in 21 patients in RME group (mean age of 8.43 years) and 16 patients in SME group (mean age of 8.70 years). Based on the skewness and kurtosis statistics, the variables were judged to be normally distributed and paired t-test and student t-test were performed at significance level of 5%. RESULTS: Intermolar angle changed significantly due to treatment and RME showed greater buccal tipping than SME. RME showed significant changes in other four measurements due to treatment: maxilla moved forward and mandible showed backward rotation and, at transversal level both skeletal and dentoalveolar showed significant changes due to maxillary expansion. SME showed significant dentoalveolar changes due to maxillary expansion. CONCLUSIONS: Only intermolar angle showed significant difference between the two modalities of maxillary expansion with greater buccal tipping for RME. Also, RME produced skeletal maxillary expansion and SME did not. Both maxillary expansion modalities were efficient to promote transversal gain at dentoalveolar level. Sagittal and vertical measurements did not show differences between groups, but RME promoted a forward movement of the maxilla and backward rotation of the mandible. PMID:28658357

Vocal anatomy, tongue protrusion behaviour and the acoustics of rutting roars in free-ranging Iberian red deer stags (Cervus elaphus hispanicus)

PubMed Central

Frey, Roland; Volodin, Ilya; Volodina, Elena; Carranza, Juan; Torres-Porras, Jerónimo

2012-01-01

Roaring in rutting Iberian red deer stags Cervus elaphus hispanicus is unusual compared to other subspecies of red deer, which radiated from the Iberian refugium after the last glacial maximum. In all red deer stags, the larynx occupies a permanent low mid-neck resting position and is momentarily retracted almost down to the rostral end of the sternum during the production of rutting calls. Simultaneous with the retraction of the larynx, male Iberian red deer pronouncedly protrude the tongue during most of their rutting roars. This poses a mechanical challenge for the vocal tract (vt) and for the hyoid apparatus, as tongue and larynx are strongly pulled in opposite directions. This study (i) examines the vocal anatomy and the acoustics of the rutting roars in free-ranging male C. e. hispanicus; (ii) establishes a potential mechanism of simultaneous tongue protrusion and larynx retraction by applying a two-dimensional model based on graphic reconstructions in single video frames of unrestrained animals; and (iii) advances a hypothesis of evaporative cooling by tongue protrusion in the males of a subspecies of red deer constrained to perform all of the exhausting rutting activities, including acoustic display, in a hot and arid season. PMID:22257361

Maxillary Sinus Dimensions Decrease as Age and Tooth Loss Increase.

PubMed

Velasco-Torres, Miguel; Padial-Molina, Miguel; Avila-Ortiz, Gustavo; García-Delgado, Raúl; OʼValle, Francisco; Catena, Andrés; Galindo-Moreno, Pablo

2017-04-01

To investigate the correlation between patient-dependent variables and dimensional variations of the maxillary sinus. In this cross-sectional study, a total of 394 individual cone-beam computed tomography scans were evaluated by one calibrated examiner to measure the total volume of the maxillary sinus, the distance between the medial and the lateral walls at 5, 10, and 15 mm vertically from the sinus floor, the height of septa (if present), and the height of the maxillary sinus cavity from both the alveolar crest and the sinus floor to the meatus. Recorded patient-dependent variables were age, gender, and edentulism status. Total maxillary sinus volume was significantly smaller in completely and partially edentulous patients than in dentate subjects. This finding was influenced by age, as older patients exhibited less volume, regardless of gender and edentulism status. Age showed an indirect correlation with the distance to the meatus, the sinus volume, and the mediolateral dimensions. Additionally, the prevalence of accessory meatus in this population was 29.19%. The dimensions of the maxillary sinus are influenced by age and edentulism status being reduced by aging and tooth loss.

Transnasal endoscopic medial maxillectomy in recurrent maxillary sinus inverted papilloma.

PubMed

Kamel, Reda H; Abdel Fattah, Ahmed F; Awad, Ayman G

2014-12-01

Maxillary sinus inverted papilloma entails medial maxillectomy and is associated with high incidence of recurrence. To study the impact of prior surgery on recurrence rate after transnasal endoscopic medial maxillectomy. Eighteen patients with primary and 33 with recurrent maxillary sinus inverted papilloma underwent transnasal endoscopic medial maxillectomy. Caldwell-Luc operation was the primary surgery in 12 patients, transnasal endoscopic resection in 20, and midfacial degloving technique in one. The follow-up period ranged between 2 to 19.5 years with an average of 8.8 years. Recurrence was detected in 8/51 maxillary sinus inverted papilloma patients (15.7 %), 1/18 of primary cases (5.5 %), 7/33 of recurrent cases (21.2 %); 3/20 of the transnasal endoscopic resection group (15%) and 4/12 of the Caldwell-Luc group (33.3%). Redo transnasal endoscopic medial maxillectomy was followed by a single recurrence in the Caldwell-Luc group (25%), and no recurrence in the other groups. Recurrence is more common in recurrent maxillary sinus inverted papilloma than primary lesions. Recurrent maxillary sinus inverted papilloma after Caldwell-Luc operation has higher incidence of recurrence than after transnasal endoscopic resection.

Volumetric analysis of maxillary sinuses of Zulu and European crania by helical, multislice computed tomography.

PubMed

Fernandes, C L

2004-11-01

The volumes of the maxillary sinuses are of interest to surgeons operating endoscopically as variation in maxillary sinus volume may mean variation in anatomical landmarks. Other surgical disciplines, such as dentistry, maxillo-facial surgery and plastic surgery, may benefit from this information. To compare the maxillary sinus volumes of dried crania from cadavers of European and Zulu descent, with respect to ethnic group and gender. Helical, multislice computed tomography (CT) was performed using 1-mm coronal slices. The area for each slice was obtained by tracing the outline of each slice. The CT machine calculated a volume by totalling the slices for each sinus. Ethnic and gender variations were found in the different groups. It was found that European crania had significantly larger antral volumes than Zulu crania and men had larger volumes than women. Race and gender interaction was also assessed, as was maxillary sinus side. A variation in maxillary sinus volume between different ethnic groups and genders exists, and surgeons operating in this region should be aware of this.

Use of anterior maxillary distraction osteogenesis in two cleft lip and palate patients

PubMed Central

Srivastava, Dhirendra; Ghassemi, Alireza; Ghassemi, Mehrangiz; Showkatbakhsh, Rahman; Jamilian, Abdolreza

2015-01-01

Distraction osteogenesis (DO) has become a mainstream surgical technique for patients with jaw deformities. The aim of this study was to report the effect of DO done by a hyrax screw incorporated in an acrylic plate in the treatment of two maxillary deficient cases with cleft lip and palate. Two patients, a 24-year-old female and a 29-year-old male who suffered from maxillary deficiency and cleft lip and palate, were treated by DO. After making vertical cuts between the premolars on both sides and horizontal cuts similar to Le Fort 1, a hyrax screw was mounted on an acrylic plate for the slow anteroposterior expansion of maxillary arch. The expansion was achieved by turning the hyrax screw 0.8 mm per day after the latency period. Treatment was discontinued after achieving satisfactory over jet and occlusion. This study showed that anterior maxillary distraction is a reliable technique for correction of midfacial deformity arising out of cleft lip and palate. Incidences of complications are negligible compared to total maxillary distraction. PMID:26668459

The correction of maxillary defciency with internal distraction devices: a multidisciplinary approach.

PubMed

Oz, A Alper; Ozer, Mete; Eroglu, Lütfi; Ozdemir, Oguz Suleyman

2013-09-01

The purpose of this case report is to present the orthodontic, surgical and restorative treatments in the case of an operated cleft lip and palate and severe maxillary defciency in a 14-year-old female patient. Only orthodontic treatment could be ineffcient for cleft lip and palate patients characterized with maxillary hypoplasia. Orthodontic and surgical treatment shows suffcient results, especially with severe skeletal defciency. A cleft lip and palate patient required complex multidisciplinary treatment to preserve health and restore esthetics. Dental leveling and alignment of the maxillary and mandibular teeth were provided before the surgery. Maxillary advancement and clockwise rotation of the maxillary-mandibular complex was applied by a Le Fort 1 osteotomy with two internal distraction devices. After the active treatment including orthodontic treatment and orthognathic surgery, upper full mouth ceramic restoration was applied. This report shows the efficiency of internal distraction devices in cleft lip palate patients and exemplifes the multidisciplinary care required for such diffcult cases. Clinical signifcance: Stable improved occlusion and skeletal relations were observed after a follow-up examination period of 12 months.

Use of anterior maxillary distraction osteogenesis in two cleft lip and palate patients.

PubMed

Srivastava, Dhirendra; Ghassemi, Alireza; Ghassemi, Mehrangiz; Showkatbakhsh, Rahman; Jamilian, Abdolreza

2015-01-01

Distraction osteogenesis (DO) has become a mainstream surgical technique for patients with jaw deformities. The aim of this study was to report the effect of DO done by a hyrax screw incorporated in an acrylic plate in the treatment of two maxillary deficient cases with cleft lip and palate. Two patients, a 24-year-old female and a 29-year-old male who suffered from maxillary deficiency and cleft lip and palate, were treated by DO. After making vertical cuts between the premolars on both sides and horizontal cuts similar to Le Fort 1, a hyrax screw was mounted on an acrylic plate for the slow anteroposterior expansion of maxillary arch. The expansion was achieved by turning the hyrax screw 0.8 mm per day after the latency period. Treatment was discontinued after achieving satisfactory over jet and occlusion. This study showed that anterior maxillary distraction is a reliable technique for correction of midfacial deformity arising out of cleft lip and palate. Incidences of complications are negligible compared to total maxillary distraction.

Correction of complete maxillary crossbite with severe crowding using Hyrax expansion and fixed appliance.

PubMed

Wangsrimongkol, Tasanee; Manosudprasit, Montian; Pisek, Poonsak; Leelasinjaroen, Pornnapha

2013-09-01

An 18-year-old Thai man who presented with a secondary cleft palate, maxillary hypoplasia and severe crowding was treated by rapid maxillary expansion and fixed orthodontic appliances. Initial assessment found skeletal Class III malrelationship and dental Class II malocclusion with anterior and bilateral posterior crossbites. Camouflage orthodontic treatment was planned using a rapid maxillary expansion appliance and correcting crowding with extraction all four premolar teeth. A Hyrax appliance and vertical loop arch wire were placed for maxillary arch expansion of 9.5 mms at first molars and canines, and 5.5 mms at the premolars and obtained positive overjet. Both acceptable skeletal and soft tissue relationships and satisfactory occlusion were produced. After 14 months of postoperative follow-up, the occlusal result was stable and no skeletal reversals could be detected.

Determination of Frequency of the Second Mesiobuccal Canal in the Permanent Maxillary First Molar Teeth with Magnification Loupes (× 3.5)

PubMed Central

Hasan, Muhammad; Raza Khan, Farhan

2014-01-01

INTRODUCTION: The mesiobuccal root of the maxillary first molar has generated more research and clinical investigation than any root. An inability to detect and treat a second mesiobuccal (MB2) canal is a reason for endodontic failure in maxillary first molars. Modifications in the endodontic access and detection techniques, along with advancements in illumination and magnification technology, have aided in the location and treatment with the second mesiobuccal canal of maxillary first molars. OBJECTIVE: To determine the frequency of the second mesiobuccal canal in the permanent maxillary first molars with magnification loupes (× 3.5). MATERIALS AND METHODS: A total of 53 teeth were assessed using a moderate magnification for second mesiobuccal canal in mesiobuccal root of first permanent maxillary molars in vivo. Detection of this canal in maxillary first molars was done through a clinical access cavity preparation under magnification loupes (× 3.5). Data was analyzed using SPSS 15.0. Frequency distribution of variables was determined and the level of significance was kept at 0.05. RESULTS: We were able to detect second mesiobuccal canal in 27 out of 53 (50.9%) of the permanent maxillary first molars that were studied. It was found that the males tend to have a higher proportion of second mesiobuccal canals (up to 31%) as compared to the females in whom the second mesiobuccal canals could be identified only 19% of the time. Whilst, there was no association found between age, gender and chamber obliteration with the presence of second mesiobuccal canal. CONCLUSIONS: In conclusion, within its limitations, this study suggested that the use of magnification loupes enhanced both the detection (50.9%) and negotiation (86.8%) of the second mesiobuccal canals in the permanent maxillary first molars beyond what could be achieved with naked eye. PMID:25324702

Implant-supported maxillary overdentures retained with milled bars: maxillary anterior versus maxillary posterior concept--a retrospective study.

PubMed

Krennmair, Gerald; Krainhöfner, Martin; Piehslinger, Eva

2008-01-01

The aim of the present retrospective investigation was to evaluate implant-supported maxillary overdentures using either anterior (group 1) or posterior (group 2) maxillary implant placement. Maxillary overdentures were planned with support by either 4 implants placed in the maxillary anterior region (group 1) or 6 to 8 implants placed in augmented maxillary posterior regions (group 2, bilateral sinus augmentation) and anchored either on an anterior or on 2 bilaterally placed milled bars. Cumulative implant survival rate, peri-implant conditions (marginal bone loss, pocket depth, Plaque Index, Gingival Index, Bleeding Index, and Calculus Index) and the incidence and type of prosthodontic maintenance were assessed and compared for the 2 groups. In addition, the cumulative survival rate for implants placed in grafted regions was compared with that of implants placed in nongrafted regions. Thirty-four patients (16 for group 1 and 18 for group 2) with 179 implants were available for follow-up examination after a mean period of 42.1 +/- 20.1 months. Four initially placed implants failed to osseointegrate and were replaced, but no further losses were seen during the loading period, for a 5-year cumulative implant survival rate of 978%. No differences in implant survival rates were seen between either the group-1 (98.4%) and group-2 (97.4%) concepts or nongrafted (98.0%) and grafted (97.5%) implants. The peri-implant parameters showed a healthy soft tissue, good oral hygiene, and an acceptable degree of peri-implant marginal bone loss. The rigid fixation of all overdentures was associated with a low incidence of prosthodontic maintenance, without any significant differences between the 2 groups. In well-planned overdenture treatment programs, a high survival rate and excellent peri-implant conditions can be achieved for implants placed in the anterior or posterior maxilla. Rigid anchorage of maxillary overdentures either on an extended anterior milled bar or on 2 bilateral posterior milled bars provides for a low incidence of prosthodontic maintenance.

Pharyngeal airway changes associated with maxillary distraction osteogenesis in adult cleft lip and palate patients.

PubMed

Aksu, Muge; Taner, Tülin; Sahin-Veske, Pınar; Kocadereli, Ilken; Konas, Ersoy; Mavili, Mehmet Emin

2012-02-01

To investigate 1) the changes in pharyngeal airway sizes associated with maxillary distraction osteogenesis and 2) the correlations between maxillary skeletal variables and the pharyngeal airway in adult patients with cleft lip and palate. The study was carried out in 14 adult subjects with cleft lip and palate. Predistraction records were taken at a mean age of 22.7 ± 4.6 years. All patients had placement of a rigid external distraction device (RED I; KLS Martin, Tuttlingen, Germany) after Le Fort I osteotomy. Lateral cephalograms were assessed before surgery and at short-term follow-up (8.0 ± 6.4 months). The cephalometric skeletal and pharyngeal airway variables were statistically evaluated by use of the Wilcoxon signed-rank test. Spearman ρ correlation was performed to check the correlations between maxillary skeletal and pharyngeal variables. The maxillary movement was 8.7 mm (P < .01). The maxillary depth angle (+7.9°) and effective maxillary length (9.4 mm) increased significantly (P < .01) after distraction, whereas the palatal plane angle remained unchanged. Anterior nasal spine (8.2 mm) and Posterior nasal spine (6.9 mm) moved anteriorly. The overjet increased (9.5 mm) significantly (P < .01). Posterior, superoposterior, and middle airway spaces increased significantly, with mean differences of 7.5 mm, 5.1 mm, and 3.3 mm, respectively. The soft palate moved anteriorly, with the greatest movement at its superior point. Significant positive correlations were observed for the posterior and superoposterior airway spaces and maxillary movement. PNS changes showed the highest correlation with posterior airway changes. The significant anterior movement of the maxilla resulted in significant increases in posterior, superoposterior, and middle airway spaces. The posterior airway space showed the highest significant positive correlation with the movement of PNS. The posterior and superoposterior airway spaces also showed significant positive correlations with the maxillary skeletal variables. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Biometric ratio in estimating widths of maxillary anterior teeth derived after correlating anthropometric measurements with dental measurements.

PubMed

Kini, Ashwini Y; Angadi, Gangadhar S

2013-06-01

To correlate dental measurements i.e. combined mesiodistal width of six maxillary anterior teeth with facial measurements i.e. inner canthal distance, interpupillary distance and intercommissural width and acquire a biometric ratio to serve as a preliminary guide in selection of the maxillary anterior teeth. In the absence of pre-extraction records, the resultant denture can lead to patient dissatisfaction towards the aesthetic appeal of their dentures. The maxillary anterior teeth play a pivotal role in denture aesthetics. Various techniques and biometric ratios have been described in literature for selection of the maxillary anteriors. This study derives a biometric ratio for the same, obtained after correlating anthropometric measurements with dental measurements. Two standardized digital photographs of the face were generated; one, when the facial muscles were relaxed and the other, when the subject was smiling; thereby, revealing the maxillary anterior teeth upto the canine tip. Inner canthal distance, interpupillary distance, intercommissural distance, distance between the tips of the maxillary canines and distance between the distal surfaces of the canines were measured. On the cast, the distance between tips of maxillary canines and distance between distal surfaces of maxillary canines were noted. The data was analysed using Spearman's rank correlation coefficient. A high correlation was found between the intercommissural measurement with distance between the tips of the canines on the photograph and between the tips of the canines on the cast with the interpupillary distance, giving a biometric ratio of 1:1.35 and 1:1.41 respectively. The least correlation was between the inner canthal distance and the tips of the canines measured on the photograph. Extra oral anthropometric measurements of the interpupillary distances and the intercommissural distances with the help of standardised photographs can help us determine the combined widths of the anterior teeth accurately, thus aiding their selection in the absence of pre-extraction records. © 2012 John Wiley & Sons A/S and The Gerodontology Society. Published by John Wiley & Sons Ltd.

Survey of Anatomy and Root Canal Morphology of Maxillary First Molars Regarding Age and Gender in an Iranian Population Using Cone-Beam Computed Tomography

PubMed Central

Naseri, Mandana; Safi, Yaser; Akbarzadeh Baghban, Alireza; Khayat, Akbar; Eftekhar, Leila

2016-01-01

Introduction: The purpose of this study was to investigate the root and canal morphology of maxillary first molars with regards to patients’ age and gender with cone-beam computed tomography (CBCT). Methods and Materials: A total of 149 CBCT scans from 92 (67.1%) female and 57 (31.3%) male patients with mean age of 40.5 years were evaluated. Tooth length, presence of root fusion, number of the roots and canals, canal types based on Vertucci’s classification, deviation of root and apical foramen in coronal and sagittal planes and the correlation of all items with gender and age were recorded. The Mann Whitney U, Kruskal Wallis and Fisher’s exact tests were used to analyze these items. Results: The rate of root fusion was 1.3%. Multiple canals were present in the following frequencies: four canals 78.5%, five canals 11.4% and three canals 10.1%. Additional canal was detected in 86.6% of mesiobuccal roots in which Vertucci’s type VI configuration was the most prevalent followed by type II and I. Type I was the most common one in distobuccal and palatal roots. There was no statistically significant difference in the canal configurations in relation to gender and age as well as the incidence root or canal numbers (P>0.05). The mean tooth length was 19.3 and 20.3 mm in female and male patients, respectively which was statistically significant (P<0.05). Evaluation of root deviation showed that most commonly, a general pattern of straight-distal in the mesiobuccal and straight-straight for distobuccal and palatal roots occurred. In mesiobuccal roots, straight and distal deviations were more dominant in male and female, respectively (P<0.05). The prevalence of apical foramen deviation in mesiobuccal and palatal roots statistically differed with gender. Conclusion: The root and canal configuration of Iranian population showed different features from those of other populations. PMID:27790259

Micro-CT evaluation of several glide path techniques and ProTaper Next shaping outcomes in maxillary first molar curved canals.

PubMed

Alovisi, M; Cemenasco, A; Mancini, L; Paolino, D; Scotti, N; Bianchi, C C; Pasqualini, D

2017-04-01

To evaluate the ability of ProGlider instruments, PathFiles and K-files to maintain canal anatomy during glide path preparation using X-ray computed micro-tomography (micro-CT). Forty-five extracted maxillary first permanent molars were selected. Mesio-buccal canals were randomly assigned (n = 15) to manual K-file, PathFile or ProGlider groups for glide path preparation. Irrigation was achieved with 5% NaOCl and 10% EDTA. After glide path preparation, each canal was shaped with ProTaper Next X1 and X2 to working length. Specimens were scanned (isotropic voxel size 9.1 μm) for matching volumes and surface areas and post-treatment analyses. Canal volume, surface area, centroid shift, canal geometry variation through ratio of diameter ratios and ratio of cross-sectional areas were assessed in the apical and coronal levels and at the point of maximum canal curvature. One-way factorial anovas were used to evaluate the significance of instrument in the various canal regions. Post-glide path analysis revealed that instrument factor was significant at the apical level for both the ratio of diameter ratios and the ratio of cross-sectional areas (P < 0.001), with an improved maintenance of root canal geometry by ProGlider and PathFile. At the coronal level and point of maximum canal curvature, ProGlider demonstrated a tendency to pre-flare the root canal compared with K-file and PathFile. PathFile and ProGlider demonstrated a significantly lower centroid shift compared with K-file at the apical level (P = 0.023). Post-shaping analysis demonstrated a more centred preparation of ProGlider, compared with PathFile and K-files, with no significant differences for other parameters. Use of ProGlider instruments led to less canal transportation than PathFiles and K-files. © 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Jaw Function in Smilodon fatalis: A Reevaluation of the Canine Shear-Bite and a Proposal for a New Forelimb-Powered Class 1 Lever Model

PubMed Central

Brown, Jeffrey G.

2014-01-01

The jaw function of Smilodon fatalis has long been a source of debate. Although modern-day lions subdue large prey through the use of a suffocating throat bite, the dramatically elongated maxillary canines of S. fatalis suggest an alternative bite mechanism. The current literature favors a “canine shear-bite,” in which the depression of the cranium by the ventral neck flexors assists the mandibular adductors in closing the jaws. Although the model makes intuitive sense and appears to be supported by scientific data, the mechanical feasibility of “neck-powered” biting has not been experimentally demonstrated. In the present study, the computer-assisted manipulation of digitized images of a high-quality replica of an S. fatalis neck and skull shows that a rotation of the cranium by the ventral neck flexors will not result in jaw closure. Instead, the cranium and mandible rotate ventrally together (at the atlantooccipital joint), and the jaws remain in an open configuration. The only manner by which rotation of the cranium can simultaneously result in jaw closure is by an anterior rotation at the temporomandibular joint. Based on this finding, the author proposes a new Class 1 lever mechanism for S. fatalis jaw function. In this model, the mandible is immobilized against the neck of the prey and a dorsally directed force from the extension of the forelimbs rotates the cranium anteriorly at the temporomandibular joint. The maxillary canines pierce the prey’s neck and assist in clamping the ventral neck structures. The model is based on a maximum gape angle of approximately 90° and incorporates a secondary virtual point of rotation located slightly anteroventral to the temporomandibular joint. The Class 1 Lever Model is mechanically feasible, consistent with current data on S. fatalis anatomy and ecology, and may provide a basis for similar studies on other fossil taxa. PMID:25272032

Maxillary orthognathic surgery.

PubMed

Bauer, Richard E; Ochs, Mark W

2014-11-01

Maxillary surgery to correct dentofacial deformity has been practiced for almost 100 years. Significant advances have made maxillary surgery a safe and efficient means of correcting midface deformities. Anesthetic techniques, specifically hypotensive anesthesia, have allowed for safer working conditions. Landmark studies have proven manipulation and segmentalization of the maxilla is safe and allowed this surgery to become a mainstay in corrective jaw surgery. This article provides an overview of surgical techniques and considerations as they pertain to maxillary surgery for orthognathic surgery. Segmental surgery, openbite closure, vertical excess, grafting, and a technology update are discussed. Copyright © 2014 Elsevier Inc. All rights reserved.

Mid-maxillary distraction osteogenesis of cleft patients using a special custom-made tooth-borne device.

PubMed

Dias, D K; De Silva, H L; Senadeera, W M

2011-09-01

A relatively new approach to maxillary advancement by maxillary distraction using a combined surgical and modified orthodontic technique is described. This protocol and the technique have been used for the past 3 years (2006 to 2009) on more than 60 patients, aged between 14-29 years. Distraction of between 7 and 18 mm has been achieved, creating class 1 or mild class 2 arch relationships in cleft lip and cleft palate patients who had class 3 arch relationship compounded by significant maxillary retrusion. The technique is simple, inexpensive and less time consuming.

Does Andrews facial analysis predict esthetic sagittal maxillary position?

PubMed

Resnick, Cory M; Daniels, Kimberly M; Vlahos, Maryann

2018-04-01

Cephalometric analyses have limited utility in planning maxillary sagittal position for orthognathic surgery. In Six Elements of Orofacial Harmony, Andrews quantified maxillary position relative to forehead projection and angulation and proposed an ideal relationship. The purpose of this study was to investigate the ability of this technique to predict esthetic sagittal maxillary position. Survey study including a male and female with straight facial profiles, normal maxillary incisor angulations, and Angle's Class I. Maxillary position was modified on lateral photographs to create 5 images for each participant with incisor-goal anterior limit line (GALL) distances of -4, -2, 0, +2, and +4 mm. A series of health care professionals and laypeople were asked to rate each photo in order of attractiveness. A total of 100 complete responses were received. Incisor-GALL distances of +4 mm (41%) and +2 mm (40%) were most commonly considered "most esthetic" for the female volunteer (P < .001). For the male volunteer, there were 2 peak "most esthetic" responses: incisor-GALL distances of 0 mm (37%) and -4 mm (32%) (P < .001). Respondents considered maxillary incisor position 2 to 4 mm anterior to GALL most attractive in a woman and 0 to 4 mm posterior to GALL most esthetic in a man. Using these modified target distances, this analysis may be useful for orthognathic surgery planning. Copyright © 2018 Elsevier Inc. All rights reserved.

Midpalatal miniscrews and high-pull headgear for anteroposterior and vertical anchorage control: cephalometric comparisons of treatment changes.

PubMed

Lee, Jungkil; Miyazawa, Ken; Tabuchi, Masako; Kawaguchi, Misuzu; Shibata, Momoko; Goto, Shigemi

2013-08-01

Our aim was to evaluate which anchorage system is better suited for both anteroposterior and vertical anchorage control of maxillary posterior teeth. Fifty-one subjects requiring maximum anchorage were divided into 2 groups according to maxillary posterior anchorage reinforcement: high-pull headgear, conventional transpalatal arch, and interarch elastics (n = 28); or modified transpalatal arch supported by 2 midpalatal miniscrews (n = 23). Bilateral maxillary first premolars were extracted in all patients. Pretreatment and posttreatment lateral cephalometric radiographs were superimposed to compare skeletal and dental changes between the groups. (1) The miniscrew group had less mesial movement of the maxillary first molars (0.85 vs 3.63 mm) and greater maxillary incisor retraction (6.87 vs 4.50 mm) than did the headgear group with the same treatment duration. (2) The maxillary molars were significantly intruded in the miniscrew group (1.30 mm), whereas they were extruded in the headgear group (0.71 mm). In the miniscrew group, intrusion of the maxillary molars resulted in a statistically significant decrease in the mandibular plane angle (0.80°). Patients using high-pull headgear showed no significant decrease in these measurements. In both the anteroposterior and vertical directions, a modified transpalatal arch supported by 2 midpalatal miniscrews provided more stable anchorage. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

One-step transversal palatal distraction and maxillary repositioning: technical considerations, advantages, and long-term stability.

PubMed

Cortese, Antonio; Savastano, Mauro; Savastano, Germano; Claudio, Pier Paolo

2011-09-01

Transversal maxillary hypoplasia in adolescence is a frequently seen pathology, which can be treated with a combination of surgery and orthodontic treatment to widen the maxilla in skeletally matured patients.We evaluated the advantages of a new surgical technique: Le Fort I distraction osteogenesis using a bone-borne device. Because relapse is one of the main problems in surgical maxillary expansion, long-term stability of this new technique was evaluated. Data from 4 adult patients with maxillary restriction, class III malocclusion, or maxillary malposition were collected preoperatively, 4 months after distraction, and 5 years after distraction. Measurements were recorded on dental models to detect palatal expansion at dental level; cephalograms by lateral and posteroanterior plane were analyzed to detect maxillary movements. Maxillary measurements were substantially stable 5 years after distractions. Only minor dental movements occurred at the dental analysis after 5 years related to a lack of orthodontic contention without any compromise of the dental result (no crossbite relapse and class I stability). Le Fort I with down-fracture for expansion and repositioning by bone-borne distractor device can [corrected] be used to simultaneously widen, advance, and vertically reposition the maxilla without causing healing problems, particularly using a rigid distraction device. Long-term stability can be achieved; however, further studies with a larger number of patients will be necessary for better evaluation.

Analysis of the width ratio and wear rate of maxillary anterior teeth in the Korean population.

PubMed

Oh, Yeon-Ah; Yang, Hong-So; Park, Sang-Won; Lim, Hyun-Pil; Yun, Kwi-Dug; Park, Chan

2017-04-01

The purpose of this study was to compare the width ratio of maxillary anterior teeth according to age in the Korean population and to evaluate the maxillary central incisor width-to-length (W/L) ratio, given differences in age and gender. Ninety-three Korean adults were divided into 3 groups (n = 31) by age. Group I was 20 - 39 years old, Group II was 40 - 59 years old, and Group III was over 60 years of age. After taking an impression and a cast model of the maxillary arch, the anterior teeth width ratio and central incisor W/L ratio were calculated from standard digital images of the cast models using a graph paper with a digital single lens reflex (DSLR) camera. The calculated ratios were compared among all groups and central incisor W/L ratio were analyzed according to age and gender. All comparative data were statistically analyzed with one-sample t-tests, one-way ANOVAs with Tukey tests, and independent t-tests. No significant differences in maxillary anterior teeth ratios were found among the age groups. The maxillary central incisor W/L ratios in Group III were the greatest and were significantly higher than those in the other groups. The central incisor W/L ratio of men was higher than that of women in Group II. Maxillary anterior teeth width ratios were similar in all age groups in the Korean population. The maxillary central incisor was observed as worn teeth in the group over 60 years of age, and a significant difference between genders was found in 40 to 50 year olds.

Three-dimensional evaluation of tooth movement in Class II malocclusions treated without extraction by orthodontic mini-implant anchorage.

PubMed

Ali, Dler; Mohammed, Hnd; Koo, Seung-Hwan; Kang, Kyung-Hwa; Kim, Sang-Cheol

2016-09-01

The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t-test. All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in (4.5°, p < 0.001; 3.0°, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars.

Three-dimensional evaluation of tooth movement in Class II malocclusions treated without extraction by orthodontic mini-implant anchorage

PubMed Central

Ali, Dler; Mohammed, Hnd; Koo, Seung-Hwan; Kang, Kyung-Hwa

2016-01-01

Objective The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t-test. Results All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in (4.5°, p < 0.001; 3.0°, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars. PMID:27668191

An easy access to retrieve dental implants displaced into the maxillary sinus: the bony window technique.

PubMed

Biglioli, Federico; Chiapasco, Matteo

2014-12-01

To present the authors' experience concerning the removal of dental implants displaced in the maxillary sinus via an intraoral approach consisting of the creation of a bony window pedicled to the maxillary sinus membrane. Thirty-six systemically healthy patients, presenting with oral implants displaced into the maxillary sinus, but with no signs of acute or chronic sinusitis, were consecutively treated between 2002 and 2012 via an intraoral approach with the bony window technique. Removal of oral implants from the maxillary sinus was achieved in all patients, and postoperative recovery was uneventful in all of them. Computed tomographies performed after surgery showed no signs of residual sinus infection in all patients and a complete ossification of the bony window margins. Twelve of the 36 treated patients were treated with a sinus grafting procedure 12-18 months after in the same areas previously treated with the bone lid technique. Seventeen implants were placed in the grafted areas 6-9 months later and, after a further waiting period needed for osseointegration, the treated patients were rehabilitated with implant-supported prostheses. The survival rate of implants was 100%, and no complications related to the sinuses and implants were recorded. Results from this study seem to demonstrate that the bony window technique is a safe and easy way to remove oral implants from the maxillary sinus under local anesthesia. The surgical access is hardly visible 6-12 months after surgery, and maxillary sinuses appeared free from residual pathology in all treated patients. Finally, this procedure allows a second-stage sinus grafting procedure via a lateral approach as in a previously untreated maxillary sinus, thus allowing an implant-supported prosthetic restoration. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Comparison of the intrusion effects on the maxillary incisors between implant anchorage and J-hook headgear.

PubMed

Deguchi, Toru; Murakami, Takashi; Kuroda, Shingo; Yabuuchi, Toshinori; Kamioka, Hiroshi; Takano-Yamamoto, Teruko

2008-05-01

Recently, miniscrews have been used to provide anchorage during orthodontic treatment, especially for incisor intrusion. Miniscrews during incisor intrusion are commonly used in implant orthodontics. Traditionally, effective incisor intrusion has been accomplished with J-hook headgear. In this study, we compared the effect of incisor intrusion, force vector, and amount of root resorption between implant orthodontics and J-hook headgear. Lateral cephalometric radiographs from 8 patients in the implant group and 10 patients in the J-hook headgear group were analyzed for incisor retraction. The estimated force vector was analyzed in the horizontal and vertical directions in both groups. Root resorption was also measured on periapical radiographs. In the implant group, significant reductions in overjet, overbite, maxillary incisor to palatal plane, and maxillary incisor to upper lip were observed after intrusion of the incisors. In the J-hook headgear group, significant reductions in overjet, overbite, maxillary incisor to upper lip, and maxillary incisor to SN plane were observed after intrusion of the incisors. There were significantly greater reductions in overbite, maxillary incisor to palatal plane, and maxillary incisor to upper lip in the implant group than in the J-hook headgear group. Estimated force analysis resulted in significantly more force in the vertical direction and less in the horizontal direction in the implant group. Furthermore, significantly less root resorption was observed in the implant group compared with the J-hook headgear group. The maxillary incisors were effectively intruded by using miniscrews as orthodontic anchorage without patient cooperation. The amount of root resorption was not affected by activating the ligature wire from the miniscrew during incisor intrusion.

Silent sinus syndrome an acquired condition and the essential role of otorhinolaryngologist consultation: a retrospective study.

PubMed

Martínez-Capoccioni, Gabriel; Varela-Martínez, Ernesto; Martín-Martín, Carlos

2016-10-01

The silent sinus syndrome (SSS) is a rare clinical entity characterized by painless spontaneous enophthalmos, hypoglobus, and facial deformities secondary to chronic maxillary sinus atelectasis. The aim of this study was to present an SSS diagnostic feature and evaluate the relationship between nasal septum deviation and maxillary sinus volume. A retrospective chart review of the clinical characteristics of 20 patients diagnosed with SSS between January 2013 and July 2014 were analyzed by the Department of Otorhinolaryngology of University Hospital Complex of Santiago de Compostela. 14 patients were females and six males. The mean age was 43 years (range 28-67 years). The right maxillary sinus was involved in 12 patients and the left maxillary sinus in eight patients. There was no statistical difference between gender and the presence of SSS. Maxillary sinus sizes were significantly smaller on the same side as the deviation (p < 0.01). 14 patients were treated with functional endoscopic sinus surgery (FESS) with maxillary antrostomy. We concluded that patients with SSS usually present with facial asymmetry, and the best approach to document and show all facial asymmetries for these patients are the frontal and craneo-caudal photographs. The present study demonstrates that, in adult patients, SSS generally presents a septal deviation to the affected maxillary sinus. We recommend performing a paranasal sinus CT scan when the patient has a deviated nasal septum, retraction of the malar eminence (evidenced from the viewpoint cranio-caudal facial) and hypoglobus. FESS performing postero-anterior uncinectomy and enlargement of the maxillary ostium is recommended to restore sinus pressure and prevent progression of the enophthalmos, hypoglobus and facial deformities.

Use of repeat anterior maxillary distraction to correct residual midface hypoplasia in cleft patients.

PubMed

Richardson, Sunil; Krishna, Shreya; Bansal, Avi

2017-12-01

The study was designed to evaluate the efficacy of performing a second, repeat anterior maxillary distraction (AMD) to treat residual cleft maxillary hypoplasia. Five patients between the ages of 12 to 15 years with a history of AMD and with residual cleft maxillary hypoplasia were included in the study. Inclusion was irrespective of gender, type of cleft lip and palate, and the amount of advancement needed. Repeat AMD was executed in these patients 4 to 5 years after the primary AMD procedure to correct the cleft maxillary hypoplasia that had developed since the initial procedure. Orthopantomogram (OPG) and lateral cephalograms were taken for evaluation preoperatively, immediately after distraction, after consolidation, and one year postoperatively. The data obtained was tabulated and a Mann Whitney U-test was used for statistical comparisons. At the time of presentation, a residual maxillary hypoplasia was observed with a well maintained distraction gap on the OPG which ruled out the occurrence of a relapse. Favorable movement of the segments without any resistance was seen in all patients. Mean maxillary advancement of 10.56 mm was achieved at repeat AMD. Statistically significant increases in midfacial length, SNA angle, and nasion perpendicular to point A distance was achieved ( P =0.012, P =0.011, and P =0.012, respectively). Good profile was achieved for all patients. Minimal transient complications, for example anterior open bite and bleeding episodes, were managed. Addressing the problem of cleft maxillary hypoplasia at an early age (12-15 years) is beneficial for the child. Residual hypoplasia may develop in some patients, which may require additional corrective procedures. The results of our study show that AMD can be repeated when residual deformity develops with the previous procedure having no negative impact on the results of the repeat procedure.

Penetration of flomoxef into human maxillary and mandibular bones.

PubMed

Igawa, H H; Sugihara, T; Yoshida, T; Kawashima, K; Ohura, T

1995-09-01

Penetration of flomoxef into the maxillary and mandibular bones was assayed clinically to provide data about its usefulness for the prevention of postoperative infection after maxillofacial surgery. Twenty-one patients undergoing maxillofacial surgery at our department were given flomoxef 2 g dissolved in 20 ml of physiological saline intravenously over 3 minutes during operation, and the serum, maxillary and mandibular concentrations were measured 1, 3, and 6 hours after injection by the band culture method using Escherichia coli 7437 as the indicator strain. The mean concentrations were 53.4, 16.1, and 2.6 micrograms/ml, respectively, in the serum, 17.6, 7.8, and 1.0 micrograms/g in maxillary bone, and 16.4, 4.2, and 0.9 micrograms/g in mandibular bone. The mean bone:serum ratios at 1, 3, and 6 hours were 33.0%, 48.2%, and 36.8%, respectively, for maxillary bone, and 30.7%, 26.2%, and 35.7% for mandibular bone. When compared with previously reported data on the bone:serum ratios in jaw of various other intravenous antibiotics, our results show that penetration of flomoxef into maxillary and mandibular bone is extremely high. As all the intramaxillary and intramandibular concentrations exceed its MIC80 values against clinical isolates of bacteria frequently isolated in cases of infection in the oral and maxillofacial region, it is apparent that one intravenous shot of flomoxef 2 g allows penetration of the drug into the maxillary and mandibular bones at effective concentrations. Flomoxef is therefore potentially useful for the prevention and treatment of infections in the oral and maxillofacial region, as it has excellent penetration into the maxillary and mandibular bones.

Cleft-Related Orthognathic Surgery Based on Maxillary Vertical Lengthening of the Anterior Facial Height.

PubMed

Jeong, Woo Shik; Jeong, Hyung Hwa; Kwon, Soon Man; Koh, Kyung S; Choi, Jong Woo

2018-03-01

The conventional approach during orthognathic surgery for cleft-related deformities has focused largely on restoration of maxilla retrusion, using the maxillary advancement as a standard treatment objective. However, the authors thought that maxillary vertical shortening and deficient incisor show could be additional key elements of cleft-related deformities. Although slight vertical lengthening can be obtained with only maxillary advancement, it would not be enough to obtain satisfactory aesthetic results in terms of the anterior facial height. The authors hypothesized that vertical deficiency and anteroposterior maxillary retrusion exists in cleft-related deformities. Therefore, orthognathic surgery including intentional vertical lengthening and advancement would be better than the conventional simple advancement. A new approach was used to treat consecutive patients with dentofacial deformities between December of 2007 and December of 2016. Patients with cleft-related dentofacial deformities were included in the study. Forty-one patients with cleft-related dentofacial deformities were included. The distance from the nasion to the incisor tip was 76.70 mm; the angle of the lines connecting the sella, nasion, and point A was 74.03 degrees; and the incisor show was 1.02 mm. Corresponding measurements in 40 patients without clefts were 81.57 mm, 80.08 degrees, and 3.38 mm, respectively. Postoperatively, the average vertical lengthening achieved was 0.88 mm in the simple maxillary advancement group and 7.65 mm in the intentional vertical lengthening accompanied by maxillary advancement group. The authors' results suggest that simultaneous maxillary vertical lengthening with horizontal advancement is a viable approach to orthognathic surgery for cleft-related deformities, given the long-term stability of outcomes demonstrated in this study. Therapeutic, III.

COMPUTED TOMOGRAPHIC FEATURES OF INCISOR PSEUDO-ODONTOMAS IN PRAIRIE DOGS (CYNOMYS LUDOVICIANUS).

PubMed

Pelizzone, Igor; Di Ianni, Francesco; Volta, Antonella; Gnudi, Giacomo; Manfredi, Sabrina; Bertocchi, Mara; Parmigiani, Enrico

2017-05-01

Maxillary incisor pseudo-odontomas are common in pet prairie dogs and can cause progressive respiratory obstruction, while mandibular pseudo-odontomas are rarely clinically significant. The aim of this retrospective cross-sectional study was to describe CT features of maxillary and mandibular incisor pseudo-odontomas vs. normal incisors in a group of pet prairie dogs. All pet prairie dogs with head CT scans acquired during the period of 2013-2015 were included. A veterinary radiologist who was aware of final diagnosis reviewed CT scans and recorded qualitative features of affected and normal incisors. Mean density values for the pulp cavity and palatal and buccal dentin were also recorded. A total of 16 prairie dogs were sampled (12 normal maxillary incisors, 20 confirmed maxillary incisor pseudo-odontomas, 20 normal mandibular incisors, 12 presumed mandibular incisor pseudo-odontomas). Maxillary incisors with confirmed pseudo-odontomas had a significantly hyperattenuating pulp and dentin in the reserve crown and apical zone, when compared to normal maxillary incisors. Pseudo-odontomas appeared as enlargements of the apical zone with a globular/multilobular hyperattenuating mass formation haphazardly arranged, encroaching on midline and growing caudally and ventrally. Presumed mandibular incisor pseudo-odontomas had similar CT characteristics. In 60% of prairie dogs with maxillary incisor pseudo-odontomas, the hard palate was deformed and the mass bulged into the oral cavity causing loss of the palatine bone. The common nasal meatus was partially or totally obliterated in 81.8% of prairie dogs with maxillary pseudo-odontomas. Findings supported the use of CT for characterizing extent of involvement and surgical planning in prairie dogs with pseudo-odontomas. © 2017 American College of Veterinary Radiology.

Dental anomalies in an orthodontic patient population with maxillary lateral incisor agenesis.

PubMed

Citak, Mehmet; Cakici, Elif Bahar; Benkli, Yasin Atakan; Cakici, Fatih; Bektas, Bircan; Buyuk, Suleyman Kutalmış

2016-01-01

The purpose of this study was to evaluate the prevalence of dental anomalies in a subpopulation of orthodontic patients with agenesis of maxillary lateral incisors (MLI). The material of the present study included the records of the 1964 orthodontic patients. Panoramic radiographs and dental casts were used to analyze other associated eight dental anomalies, including agenesis of other teeth, dens invaginatus, dens evaginatus, peg shaped MLI, taurodontism, pulp stone, root dilaceration and maxillary canine impaction. Out of the 1964 patients examined, 90 were found to have agenesis of MLI, representing a prevalence of 4.6%. The most commonly found associated-anomalies were agenesis of other teeth (23.3%), peg-shaped MLIs (15.6%), taurodontism (42.2%), and dilacerated teeth (18.9%). Permanent tooth agenesis, taurodontism, peg-shaped maxillary lateral incisor, and root dilacerations are frequently associated with maxillary lateral incisor agenesis.

Maxillary Arch Dimensions and Spectral Characteristics of Children with Cleft Lip and Palate Who Produce Middorsum Palatal Stops

ERIC Educational Resources Information Center

Zajac, David J.; Cevidanes, Lucia; Shah, Sonam; Haley, Katarina L.

2012-01-01

Purpose: The purpose of this study was twofold: (a) to determine maxillary arch dimensions of children with repaired cleft lip and palate (CLP) who produced middorsum palatal stops and (b) to describe some spectral characteristics of middorsum palatal stops. Method: Maxillary arch width, length, and height dimensions and first spectral moments of…

Conservative treatment of an ankylosed tooth after delayed replantation: a case report.

PubMed

Díaz, Jaime Andrés; Sandoval, Hector Paulo; Pineda, Patricia Irene; Junod, Pablo Antonio

2007-10-01

An 8-year-old boy sustained avulsion of his upper right maxillary central incisor and lateral luxation of his upper left maxillary incisors. Subsequently, the upper right maxillary central incisor developed replacement resorption, and both upper left maxillary incisors developed pulpal canal obliteration. In the ankylosed tooth, decoronation procedure was performed, and in the 44-month follow-up period the involved alveolar site showed vertical apposition of bone and continuing replacement resorption. Decoronation is a surgical procedure that allows preservation of the bone volume for the future, avoiding aesthetic disturbances and more aggressive treatments in cases where other therapeutic alternatives are not feasible.

Five years experience with a new intraoral maxillary distraction device (RID).

PubMed

Picard, Arnaud; Diner, Patrick A; Galliani, Eva; Tomat, Catherine; Vazquez, Ma rie Paule; Carls, Friedrich P

2011-10-01

Maxillary distraction osteogenesis is well established for the treatment of severe retromaxilla. We report our experience since 2004 of the treatment of 19 patients using a new intraoral maxillary distraction device. Maxillary advancement was successful in all patients with mean advancement of 9.6mm (range 4-17) measured at a point in lateral cephalograms. The new device limited surgical exposure and the amount of materials implanted, and improved control in every phase of the distraction. It was psychologically accepted by patients and was more comfortable than existing devices. Copyright © 2010 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

[Evolution of maxillary sinus surgery in a university hospital].

PubMed

Waizel-Haiat, Salomón; Solano-Mendoza, María del Carmen; Vargas-Aguayo, Alejandro Martin

2012-01-01

Maxillary sinus surgery has been evolving and, due to advances in technology, endoscopic surgery is widely used in the maxillary sinus for multiple pathologies that 15 years ago were treated through open approaches. For this reason, we conducted an observational descriptive study. We reviewed the clinical records of patients with pathology involving the maxillary sinus and who were surgically treated from January 2008 to December 2009, type of disease, surgical approach used, presence of complications, pre- and postoperative score according to the Lund-Mackay scale, and resolution (or not) of symptoms. We compared these results with a previous study carried out in 1994 in our hospital. We found a total of 177 patients with maxillary sinus-related pathology, of whom 46 patients were excluded. In 131 patients we found a clear predominance of chronic rhinosinusitis without polyps as a pre-surgical diagnosis. We used four different approaches: endoscopic (88.5%), combined approach (5.5%), sublabial expanded (4.5%) and Caldwell Luc (1.5%); 41% of the patients received 0 points on the postoperative Lund-Mackay scale. Surgery of the maxillary sinus in our hospital has evolved considerably; the endoscopic approach was used as a surgical treatment in >90% of patients with a low percentage of complications.

The effects of fixed and removable face masks on maxillary deficiencies in growing patients.

PubMed

Jamilian, Abdolreza; Showkatbakhsh, Rahman; Taban, Tannaz

2012-01-01

To compare the effects of two different types of face masks in the treatment of Class III malocclusions with maxillary deficiency in growing patients. Forty-three patients (21 boys and 22 girls) with maxillary deficiencies were selected. Twenty-one patients (10 boys and 11 girls) with a mean age of 8.9 ± 1.4 years were treated with maxillary removable appliances and face masks. Twenty-two patients (10 boys and 12 girls) with a mean age of 9.3 ± 1.2 years were treated with maxillary fixed appliances and face masks. Lateral cephalograms obtained at the beginning and end of the study were analyzed. Paired t tests and Wilcoxon tests showed that SNA and ANB significantly increased in both groups. The Mann-Whitney test showed that there were no statistically significant differences between the two groups except for U1-SN, which increased by 6.2 ± 7.1 degrees in the removable face mask group and 11.1 ± 6.9 degrees in the fixed face mask group (P < .02). Both treatment modalities were successful in moving the maxilla forward. However, the maxillary incisors had more labial inclination in the fixed appliance group.

Asymmetric extractions in a patient with a hopeless maxillary central incisor, followed by treatment with mini-implant anchorage.

PubMed

Jung, Min-Ho

2018-05-01

Premolar extraction is 1 option for treatment of patients with malocclusion and severe crowding or protrusion. When the patient has missing or hopeless teeth other than premolars, it is possible to consider removal of those teeth to use the space to decrease crowding. A 15-year-old girl sought treatment for severe crowding. She had already lost her maxillary right first premolar as a result of caries 1 year previously and had a hopeless maxillary right central incisor. Her mandibular left first molar still caused discomfort even after endodontic treatment. Extractions of the maxillary right central incisor and mandibular right first premolar and left first molar were chosen to resolve the occlusion problems. Orthodontic mini-implants were placed to translocate the maxillary left central incisor across the midpalatal suture to use the space in the maxillary right quadrant to relieve the crowding. Although a different extraction option was used in each quadrant, the final occlusion was acceptable. After debonding, porcelain crowns were placed on the anterior teeth to improve esthetics. The treatment result remained stable after 2 years of retention. Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Induction of carcinomas and sarcomas by 9,10-dimethyl-1,2-benzanthracene administration into the hamster maxillary sinus.

PubMed

Yura, Y; Tsujimoto, H; Kusaka, J; Harada, K; Yoshida, H; Sato, M

1995-03-01

To determine whether the local administration of 9,10-dimethyl-1,2-benzanthracene (DMBA) into the hamster maxillary sinus induced carcinoma at the injected site, hamsters were injected with 30 microliters of 0.5% solution of DMBA in dimethyl sulfoxide (DMSO) through the infraorbital foramen into the maxillary sinus once weekly for 10 weeks (Group 2). Another group of hamsters (Group 1) received similar injections of 30 microliters of DMSO only. In a third group of animals (Group 3), a roll of oxycellulose was inserted into the maxillary sinus and 40 microliters of a 2% solution of DMBA in DMSO was injected once. Sinonasal carcinomas were demonstrated in 73% (8/11) of the hamsters in Group 2 and sarcomas were shown in 73% (8/11) of the hamsters in Group 3, as well as some carcinomas. No tumors were seen in the Group 1 hamsters. Histologic examination revealed squamous cell carcinomas arising from the surface epithelium and submucous glands of the nasal cavity and maxillary sinus. These findings indicate that the intrasinal administration of a 0.5% solution of DMBA in DMSO is a reliable method for inducing maxillary sinus cancer.

Radiographic assessment of dental anomalies in patients with ectopic maxillary canines.

PubMed

Sørensen, Helle Budtz; Artmann, Lone; Larsen, Helle Juul; Kjaer, Inger

2009-03-01

The aetiology of palatally and labially located ectopic maxillary canines is multifactorial. Accordingly, early prediction of this eruptional disturbance is in most cases not possible. The purpose of this study was to analyse dental deviations in cases with either palatal or labial ectopic canines. Panoramic and intra-oral radiographs from 50 patients with palatally located (38 females and 12 males) and 19 patients with labially located ectopic canines (11 females and 8 males), aged 10 years, 2 months-18 years, 1 month, were analysed. Dental deviations registered were crown and root malformations, agenesis, and eruption deviations. Registrations were performed in the maxillary incisor field and in the dentition in general. The study documented that palatally as well as labially located ectopic canines can occur in dentitions without other dental deviations. Dental deviations occurred in approximately two-thirds of all cases, more often in females and in cases with palatally located canines. More than half of the females with palatally located canines had deviations in the maxillary incisors and in the dentition in general. Dental deviations may be considered a risk factor for maxillary canine ectopia. Early identification of patients at risk and appropriate interceptive treatment may reduce ectopic eruption of maxillary canines.

Distraction osteogenesis and orthognathic surgery for a patient with unilateral cleft lip and palate.

PubMed

Kim, Ji Hyun; Lee, Il Hong; Lee, Sang Min; Yang, Byoung Eun; Park, In Young

2015-03-01

Maxillary deficiency is a common feature in patients with repaired cleft lip and palate. Orthognathic surgery has been the conventional approach for the management of cleft-related maxillary hypoplasia. However, for patients with a severe maxillary deficiency, orthognathic surgery alone has many disadvantages, such as high relapse rates of 25% to 40%, instability, limited amount of advancement, and a highly invasive surgical technique. As an alternative treatment method, distraction osteogenesis has been used successfully in the distraction of the mandible, the maxilla, the entire midface, and the orbits as well as the cranial bones, with stable outcomes. The type of distraction device, either external or internal, can be chosen based on the surgical goals set for the patient. In this study, we report on the use of a rigid external distraction device for maxillary advancement in a 22-year-old woman with a repaired unilateral cleft lip and palate and severe maxillary hypoplasia. After the distraction osteogenesis, 2-jaw surgery was performed to correct the maxillary yaw deviation and the mandibular prognathism. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Transpalatal distraction--state of the art for the individual management of transverse maxillary deficiency--a review of 50 consecutive cases.

PubMed

Adolphs, Nicolai; Ernst, Nicole; Menneking, Horst; Hoffmeister, Bodo

2014-12-01

Transpalatal distraction has been established as a technique for surgical assisted rapid palatal/maxillary expansion (SARPE/SARME) in order to correct transverse maxillary deficiency. From 2007 until 2013 bone borne transpalatal distraction devices have been inserted in 50 patients affected by transverse maxillary deficiency and transpalatal distraction has been performed by the same surgical team. Patient records were retrospectively evaluated after ending of the active distraction phase with respect to indication, achieved expansion, additional procedures and side effects. In all cases the existing transverse maxillary deficiency was corrected by means of transpalatal distraction according to the individual needs. No complications were observed that interfered with that therapeutic aim. Evaluation of the records showed a wide variance of parameters which impedes evidence based statements. According to that series transpalatal distraction is a safe, powerful and reliable procedure and can be recommended as a state of the art procedure for the individually adapted correction of transverse maxillary deficiency if well known parameters of distraction are respected. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Protocols for Late Maxillary Protraction in Cleft Lip and Palate Patients at Childrens Hospital Los Angeles

PubMed Central

Yen, Stephen L-K

2011-01-01

This paper describes the protocols used at Childrens Hospital Los Angeles (CHLA) to protract the maxilla during early adolescence. It is a modification of techniques introduced by Eric Liou with his Alternate Rapid Maxillary Expansion and Constriction (ALT-RAMEC) technique. The main differences between the CHLA protocol and previous maxillary protraction protocols are the age the protraction is attempted, the sutural loosening by alternating weekly expansion with constriction and the use of Class III elastics to support and redirect the protraction by nightly facemask wear. The CHLA protocol entirely depends on patient compliance and must be carefully taught and monitored. In a cooperative patient, the technique can correct a Class III malocclusion that previously would have been treated with LeFort 1 maxillary advancement surgery. Thus, it is not appropriate for patients requiring 2 jaw surgeries to correct mandibular prognathism, occlusal cants or facial asymmetry. The maxillary protraction appears to work by a combination of skeletal advancement, dental compensation and rotation of the occlusal planes. Microscrew/microimplant/temporary anchorage devices have been used with these maxillary protraction protocols to assist in expanding the maxilla, increasing skeletal anchorage during protraction, limiting dental compensations and reducing skeletal relapse. PMID:21765629

Long-term follow-up after maxillary distraction osteogenesis in growing children with cleft lip and palate.

PubMed

Huang, Chiung-Shing; Harikrishnan, Pandurangan; Liao, Yu-Fang; Ko, Ellen W C; Liou, Eric J W; Chen, Philip K T

2007-05-01

To evaluate the changes in maxillary position after maxillary distraction osteogenesis in six growing children with cleft lip and palate. Retrospective, longitudinal study on maxillary changes at A point, anterior nasal spine, posterior nasal spine, central incisor, and first molar. The University Hospital Craniofacial Center. Cephalometric radiographs were used to measure the maxillary position immediately after distraction, at 6 months, and more than 1 year after distraction. After maxillary distraction with a rigid external distraction device, the maxilla (A point) on average moved forward 9.7 mm and downward 3.5 mm immediately after distraction, moved backward 0.9 mm and upward 2.0 mm after 6 months postoperatively, and then moved further backward 2.3 mm and downward 6.8 mm after more than 1 year from the predistraction position. In most cases, maxilla moved forward at distraction and started to move backward until 1 year after distraction, but remained forward, as compared with predistraction position. Maxilla also moved downward during distraction and upward in 6 months, but started descending in 1 year. There also was no further forward growth of the maxilla after distraction in growing children with clefts.

Trans-sinusal maxillary distraction for correction of midfacial hypoplasia: long-term clinical results.

PubMed

Nadjmi, N; Schutyser, F; Van Erum, R

2006-10-01

Maxillary distraction osteogenesis is indicated in severe angle class III malocclusions, and severe maxillary hypoplasia among some cleft patients and other craniofacial deformities. Twenty patients, aged 8-48 years (mean 17.8+/-10.5 SD) with maxillary and midfacial hypoplasia were treated. The follow-up period was 13-65 months (mean 35+/-16.3 SD). A trans-sinusal maxillary distractor was placed intraorally at each side of the maxilla. The distraction vector was predicted using specialist software, and was transferred to the patients using stereolithographic models and individual templates. A (high) Le Fort I type osteotomy was performed. The amount of activation varied from 8 to 17.5 mm (mean 13.1+/-2.9 SD). Soft and hard tissue formation resulted in complete healing across the distraction gaps. The distractors are almost completely submerged, and can be left in place as long as necessary to avoid relapse. Wit's appraisal was used to measure the stability of the long-term distraction results. Results up to 5 years after distraction showed considerable maxillary advancement with long-term stability. Ongoing growth of the facial skeleton must be considered when distraction osteogenesis is chosen in growing patients.

An unusual archosaurian from the marine Triassic of China

NASA Astrophysics Data System (ADS)

Li, Chun; Wu, Xiao-Chun; Cheng, Yen-Nien; Sato, Tamaki; Wang, Liting

2006-04-01

A new Triassic archosaurian from China shows a number of aquatic specializations, of which the most striking is the extreme lateral compression of the long tail. Others that may also reflect aquatic adaptations include platelike scapula and coracoid, elongate neck with extremely long and slender ribs, and reduction of osteoderms. In contrast, its pelvic girdle and hind limb have no aquatic modifications. Anatomic features, taphonomy, and local geological data suggest that it may have lived in a coastal-island environment. This lifestyle, convergent with some Jurassic marine crocodyliforms that lived at least 40 million years later and the saltwater species of extant Crocodylus, contradicts with the prevailing view that Triassic archosaurians were restricted to nonmarine ecosystems. Its mosaic anatomy represents a previously unknown ecomorph within primitive archosaurians.

A comparative analysis of salivary factors and maxillary denture retention in different arch forms: An in vivo study.

PubMed

Shekhar, Abhishek; Das, Samiran; Bhattacharyya, Jayanta; Goel, Preeti; Majumdar, Sayan; Ghosh, Soumitra

2018-01-01

This study aims to find the effect of change in different salivary factors before and after complete denture insertion and to measure the maxillary denture retention in different arch forms. Thirty completely edentulous individuals (10 each of square, tapered, and ovoid arch form of maxilla) belonging to the age group of 40-70 years were selected. Salivary factors (flow, density, pH, viscosity, and total protein) were evaluated before and after denture insertion. Retention of maxillary denture was measured in all the different arch forms. Student's independent sample's t -test was applied. The correlation was analyzed by Pearson's correlation analysis. While mean flow rate and pH of saliva increased, mean viscosity, total protein, and density of saliva decreased after maxillary complete denture insertion. A positive correlation was found between retention and total maxillary basal surface area. Retention value was found to be greatest in square type and least in tapered type. Complete denture acts as a mechanical stimulant thus increasing flow rate and pH immediately after complete denture insertion. Density, total protein, and viscosity of saliva decreased after complete denture insertion which may be due to increase in water content of saliva. The retention of maxillary complete denture does not seem to depend on the rate of change of the salivary factors, before and after complete denture insertion. Total basal surface area and maxillary denture retention values were highest in square arch form and least in tapered arch form.

Development of the maxillary sinus in infants and children.

PubMed

Bhushan, Bharat; Rychlik, Karen; Schroeder, James W

2016-12-01

To examine the age related volume change of the maxillary sinus in children by measuring the change of the height, weight, and depth using computed tomography (CT). Children <18 years of age who underwent a CT Scan of the sinuses for reasons other than sinus related issues were included in the study. 139 patients were included (68 females and 71 Males) and the mean age of the patients was 9.6 ± 5.4 years. The cohort was divided into three groups based on their ages - Age <6 years (n = 45), age between 6 and 12 years (n = 44) and age > 12 years (n = 50). Patients in each age group demonstrated an increase in their Maxillary sinus height (p<0.001). Patients < 6years of age and between 6 and 12 years of age had a significant increase in their maxillary sinus width and depth (p < 0.001). The maxillary sinus width, depth and volume did not increase significantly after the age of 12 years in these patients. We demonstrated periods of significant size increase of the maxillary sinuses as determined by different dimensions in children at various ages. The height of the maxillary sinus has steady growth from birth to at least the age of 18 years. The width and depth increase up to 12 years of age. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Lip-nasal aesthetics following Le Fort I osteotomy.

PubMed

Rosen, H M

1988-02-01

Forty-one patients undergoing Le Fort I osteotomy for superior and/or anterior repositioning of the maxilla were prospectively studied for changes in soft-tissue morphology of the nasomaxillary region. Nasal parameters studied were changes in interalar rim width and nasal tip projection. It was observed that alar rim width increases with anterior and/or superior repositioning of the maxilla, but increases in nasal tip projection occur only when there is an anterior vector of maxillary movement. These nasal changes could not be quantitatively correlated to magnitude of maxillary movement. Lip changes studied were the horizontal displacement at the vermilion border and subnasale versus that of the incisal edge and point A, respectively, when the maxilla is sagittally advanced and the vertical shortening of the lip versus that of the incisal edge when the maxilla is shortened. Using linear regression analysis, horizontal displacement of the upper lip at the vermilion border was 0.82 +/- 0.13 mm for every 1 mm of maxillary advancement at the incisal edge (p less than 0.001) and 0.51 +/- 0.13 at the subnasale for every 1 mm of maxillary advancement at point A (p less than 0.001). Eighty percent of patients undergoing maxillary intrusive procedures had lip shortening ranging from 20 to 50 percent of the vertical maxillary reduction. Surprisingly, no statistically significant correlation could be demonstrated for lip shortening versus extent of vertical maxillary reduction. Previous literature in disagreement with these findings is discussed. Guidelines for treatment planning utilizing these data are suggested.

The Relationship between Dental Follicle Width and Maxillary Impacted Canines' Descriptive and Resorptive Features Using Cone-Beam Computed Tomography.

PubMed

Dağsuyu, İlhan Metin; Okşayan, Rıdvan; Kahraman, Fatih; Aydın, Mehmet; Bayrakdar, İbrahim Şevki; Uğurlu, Mehmet

2017-01-01

To assess the relationship between dental follicle width and maxillary impacted canines' descriptive and resorptive features with three-dimensional (3D) cone-beam computed tomography (CBCT). The study comprised 102 patients with cone-beam computed tomography 3D images and a total of 140 impacted canines. The association between maxillary impacted canine dental follicle width and the variables of gender, impaction side (right and left), localization of impacted canine (buccal, central, and palatal), and resorption of the adjacent laterals was compared. Measurements were analyzed with Student's t -test, Kruskal-Wallis test, and Mann-Whitney U statistical test. According to gender, no statistically significant differences were found in the follicle size of the maxillary impacted canine between males and females ( p > 0.05). Widths of the follicles were determined for the right and left impaction sides, and no statistically significant relation was found ( p > 0.05). There were statistically significant differences between root resorption degrees of lateral incisors and maxillary impacted canine follicle width ( p < 0.05). Statistically significant higher follicle width values were present in degree 2 (mild) resorption than in degree 1 (no) and degree 3 (moderate) resorption samples ( p < 0.05). No significant correlation was found between follicle width and the variables of gender, impaction side, and localization of maxillary impacted canines. Our study could not confirm that increased dental follicle width of the maxillary impacted canines exhibited more resorption risk for the adjacent lateral incisors.

Risk factors associated with oroantral perforation during surgical removal of maxillary third molar teeth.

PubMed

Hasegawa, Takumi; Tachibana, Akira; Takeda, Daisuke; Iwata, Eiji; Arimoto, Satomi; Sakakibara, Akiko; Akashi, Masaya; Komori, Takahide

2016-12-01

The relationship between radiographic findings and the occurrence of oroantral perforation is controversial. Few studies have quantitatively analyzed the risk factors contributing to oroantral perforation, and no study has reported multivariate analysis of the relationship(s) between these various factors. This retrospective study aims to fill this void. Various risk factors for oroantral perforation during maxillary third molar extraction were investigated by univariate and multivariate analysis. The proximity of the roots to the maxillary sinus floor (root-sinus [RS] classification) was assessed using panoramic radiography and classified as types 1-5. The relationship between the maxillary second and third molars was classified according to a modified version of the Archer classification. The relative depth of the maxillary third molar in the bone was classified as class A-C, and its angulation relative to the long axis of the second molar was also recorded. Performance of an incision (OR 5.16), mesioangular tooth angulation (OR 6.05), and type 3 RS classification (i.e., significant superimposition of the roots of all posterior maxillary teeth with the sinus floor; OR 10.18) were all identified as risk factors with significant association to an outcome of oroantral perforation. To our knowledge, this is the first multivariate analysis of the risk factors for oroantral perforation during surgical extraction of the maxillary third molar. This RS classification may offer a new predictive parameter for estimating the risk of oroantral perforation.

Simultaneous maxillary distraction osteogenesis using a twin-track distraction device combined with alveolar bone grafting in cleft patients: preliminary report of a technique.

PubMed

Suzuki, Eduardo Yugo; Watanabe, Masayo; Buranastidporn, Boonsiva; Baba, Yoshiyuki; Ohyama, Kimie; Ishii, Masatoshi

2006-01-01

The simultaneous use of cleft reduction and maxillary advancement by distraction osteogenesis has not been applied routinely because of the difficulty in three-dimensional control and stabilization of the transported segments. This report describes a new approach of simultaneous bilateral alveolar cleft reduction and maxillary advancement by distraction osteogenesis combined with autogenous bone grafting. A custom-made Twin-Track device was used to allow bilateral alveolar cleft closure combined with simultaneous maxillary advancement, using distraction osteogenesis and a rigid external distraction system in a bilateral cleft lip and palate patient. After a maxillary Le Fort I osteotomy, autogenous iliac bone graft was placed in the cleft spaces before suturing. A latency period of six days was observed before activation. The rate of activation was one mm/d for the maxillary advancement and 0.5 mm/d for the segmental transport. Accordingly, the concave facial appearance was improved with acceptable occlusion, and complete bilateral cleft closure was attained. No adjustments were necessary to the vector of the transported segments during the activation and no complications were observed. The proposed Twin-Track device, based on the concept of track-guided bone transport, permitted three-dimensional control over the distraction processes allowing simultaneous cleft closure, maxillary distraction, and autogenous bone grafting. The combined simultaneous approach is extremely advantageous in correcting severe deformities, reducing the number of surgical interventions and, consequently, the total treatment time.

Changes in anteroposterior position and inclination of the maxillary incisors after surgical-orthodontic treatment of skeletal class III malocclusions.

PubMed

Zou, Bingshuang; Zhou, Yang; Lowe, Alan A; Li, Huiqi; Pliska, Benjamin

2015-12-01

The purpose of this study was to evaluate and compare the anteroposterior (AP) position and inclination of the maxillary incisors in subjects with class I normal occlusion and a harmonious profile with patients with skeletal class III malocclusions, and to investigate the changes in maxillary incisor inclination and AP position after surgical-orthodontic treatment in class III patients. Sixty-five subjects (35 female and 30 male; mean age: 21.8 ± 3.89 years) with normal profiles and class I skeletal and dental patterns were selected as a control sample. Sixty-seven patients (38 female and 29 male; mean age: 21.3 ± 3.31 years) with skeletal and dental class III malocclusions who sought surgical-orthodontic treatment were used as the study sample. Subjects were asked to smile and profile photographs were taken with the head in a natural position and the maxillary central incisors and the forehead in full view; cephalograms were taken and superimposed on the profile pictures according to the outline of the forehead and nose. Forehead inclination, maxillary incisor facial inclination and the AP position of the maxillary central incisor relative to the forehead (FAFFA) were measured on the integrated images and statistical analyses were performed. In both groups, there were no significant male/female differences in either the maxillary central incisor inclination or AP position. Female subjects had a significantly steeper forehead inclination compared with males (P < 0.001) in both groups. After combined surgical-orthodontic treatment, the significant labial inclination (P < 0.001) and posterior positioning (P < 0.001) of the maxillary central incisors had been corrected to close to normal range (P > 0.05). In the control group, 84.6% had the facial axial point (FA) of their maxillary central incisors positioned between lines through the forehead facial axis (FFA) point and the glabella. In the study group, however, 79.1% had the maxillary central incisors positioned posterior to the line through the FFA point and the difference with the control group was statistically significant (P < 0.001). The position of the maxillary central incisors was strongly correlated with forehead inclination in the control sample (r(2) = 0.456; P < 0.01), but only a poor correlation was detected in the class III group (r(2) = 0.177; P > 0.05). With the integrated radiograph-photograph method, the lateral cephalogram was reoriented, which makes it possible to accurately measure the variables on profile photographs. The AP position and inclination of the maxillary central incisors relative to the forehead plays an important role in the esthetics of the profile during smiling and could be an important variable to be considered during diagnosis and treatment planning. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Discovery of the male of the rare caligiform copepod Kabataia Kazachenko, Korotaeva & Kurochkin, 1972 (Copepoda: Siphonostomatoida), with a reconsideration of its phylogenetic affinities.

PubMed

Hutson, Kate S; Boxshall, Geoffrey A

2016-10-11

We report the discovery of the male of the rare caligiform copepod Kabataia ostorhynchi Kazachenko, Korotaeva & Kurochkin, 1972 on the gills of the type-host Oplegnathus woodwardi (Waite, 1900) captured in the Southern Ocean, off Australia. Light and scanning electron microscopy confirmed the unusual body plan of Kabataia Kazachenko, Korotaeva & Kurochkin, 1972, where only the first pedigerous somite is incorporated into the cephalothorax and the second and third pedigerous somites are fused to form a double-somite, visible both dorsally and ventrally. The adult female carries paired dorsal plates originating from the second pedigerous somite within this double-somite. In the male the second and third pedigerous somites are free and paired dorsal plates are present on the former. Kabataia exhibits sexual dimorphism in an unusually wide range of limbs. Most remarkable is the tubular extension from the exit pore of the maxillary gland at the base of the maxilla which reaches beyond the anterior margin of the mouth tube; this is present in the male only. Kabataia exhibits a functional articulation between the first and second pedigerous somites and thus lacks the diagnostic apomorphy of the family Trebiidae (incorporation of both first and second pedigerous somites into the cephalothorax). We propose to transfer Kabataia to the Pandaridae, since it shares the key synapomorphies of this family. Furthermore, we propose to transfer Innaprokofevnas Kazachenko, 2001 to the Dissonidae, which leaves Trebius Krøyer, 1838 as the only genus within the Trebiidae. The correct spelling of Philorthragoriscus Horst, 1897 is noted.

The edentulous mandible opposing maxillary natural teeth: treatment considerations utilizing implant overdentures.

PubMed

Winkler, S; Monasky, G E

1993-01-01

The restoration of the edentulous mandible opposing all or part of the maxillary natural dentition with implant overdentures is described. There are many situations in which the maxillary teeth opposing an edentulous mandible can and should be retained. Mandibular implant overdentures can be utilized as long as health considerations, morphologic features of the resorbed mandible, and maxillomandibular jaw relationships are satisfactory.

Outcomes and stability in patients with anterior open bite and long anterior face height treated with temporary anchorage devices and a maxillary intrusion splint

PubMed Central

Scheffler, Nicole R.; Proffit, William R.; Phillips, Ceib

2015-01-01

Introduction Temporary skeletal anchorage devices now offer the possibility of closing anterior open bites and decreasing anterior face height by intruding maxillary posterior teeth, but data for treatment outcomes are lacking. This article presents outcomes and posttreatment changes for consecutive patients treated with a standardized technique. Methods The sample included 33 consecutive patients who had intrusion of maxillary posterior teeth with a maxillary occlusal splint and nickel-titanium coil springs to temporary anchorage devices in the zygomatic buttress area, buccal and apical to the maxillary molars. Of this group, 30 had adequate cephalograms available for the period of treatment, 27 had cephalograms including 1-year posttreatment, and 25 had cephalograms from 2 years or longer. Results During splint therapy, the mean molar intrusion was 2.3 mm. The mean decrease in anterior face height was 1.6 mm, less than expected because of a 0.6-mm mean eruption of the mandibular molars. During the postintrusion orthodontics, the mean change in maxillary molar position was a 0.2-mm extrusion, and there was a mean 0.5-mm increase in face height. Positive overbite was maintained in all patients, with a slight elongation (<2 mm) of the incisors contributing to this. During the 1 year of posttreatment retention, the mean changes were a further eruption of 0.5 mm of the maxillary molars, whereas the mandibular molars intruded by 0.6 mm, and there was a small decrease in anterior face height. Changes beyond 1 year posttreatment were small and attributable to growth rather than relapse in tooth positions. Conclusions Intrusion of the maxillary posterior teeth can give satisfactory correction of moderately severe anterior open bites, but 0.5 to 1.5 mm of reeruption of these teeth is likely to occur. Controlling the vertical position of the mandibular molars so that they do not erupt as the maxillary teeth are intruded is important in obtaining a decrease in face height. PMID:25439210

Evaluation of an Innovative Digital Assessment Tool in Dental Anatomy.

PubMed

Lam, Matt T; Kwon, So Ran; Qian, Fang; Denehy, Gerald E

2015-05-01

The E4D Compare software is an innovative tool that provides immediate feedback to students' projects and competencies. It should provide consistent scores even when different scanners are used which may have inherent subtle differences in calibration. This study aimed to evaluate potential discrepancies in evaluation using the E4D Compare software based on four different NEVO scanners in dental anatomy projects. Additionally, correlation between digital and visual scores was evaluated. Thirty-five projects of maxillary left central incisors were evaluated. Among these, thirty wax-ups were performed by four operators and five consisted of standard dentoform teeth. Five scores were obtained for each project: one from an instructor that visually graded the project and from four different NEVO scanners. A faculty involved in teaching the dental anatomy course blindly scored the 35 projects. One operator scanned all projects to four NEVO scanners (D4D Technologies, Richardson, TX, USA). The images were aligned to the gold standard, and tolerance set at 0.3 mm to generate a score. The score reflected percentage match between the project and the gold standard. One-way ANOVA with repeated measures was used to determine whether there was a significant difference in scores among the four NEVO scanners. Paired-sample t-test was used to detect any difference between visual scores and the average scores of the four NEVO scanners. Pearson's correlation test was used to assess the relationship between visual and average scores of NEVO scanners. There was no significant difference in mean scores among four different NEVO scanners [F(3, 102) = 2.27, p = 0.0852 one-way ANOVA with repeated measures]. Moreover, the data provided strong evidence that a significant difference existed between visual and digital scores (p = 0.0217; a paired - sample t-test). Mean visual scores were significantly lower than digital scores (72.4 vs 75.1). Pearson's correlation coefficient of 0.85 indicated a strong correlation between visual and digital scores (p < 0.0001). The E4D Compare software provides consistent scores even when different scanners are used and correlates well with visual scores. The use of innovative digital assessment tools in dental education is promising with the E4D Compare software correlating well with visual scores and providing consistent scores even when different scanners are used.

Surgical-orthodontic treatment of Class I malocclusion with maxillary vertical excess--a case report.

PubMed

Kiran, Jyothi; Isaac, Anish; Shanthraj, Ravis; Madannagowda, Shivalinga

2012-01-01

This article describes the treatment of an adult male with vertical maxillary excess, excessive gingival display on smiling, a convex profile, proclined upper and lower incisors, and crowded lower anteriors with severe lip incompetence. The therapy included stages: (1) Pre surgical orthodontics- leveling and aligning of the maxillary and mandibular arch with closure of all extraction spaces. (2) Surgical phase-Lefort I osteotomy for superior maxillary impaction, 5 mm of anterior and 3 mm of posterior impaction ofmaxilla was done. (3) Post surgical orthodontics for finishing and detailing. The treatment lasted 16 months; improved facial esthetics significantly; and resulted in a normal occlusion, overjet, and overbite.

Management of unerupted maxillary deciduous central incisor: a case report.

PubMed

Shakra, Karam Abu

2014-01-01

Failure of eruption of primary teeth can be considered rare, especially in maxillary anterior teeth. The problem can be either mechanical obstruction of eruption or a failure of the eruption mechanism. This case report presents failure of eruption of the maxillary right deciduous central incisor in a 4-year-old girl. The unerupted primary tooth was removed surgically. The histological finding revealed fibroma with reactive giant cells. Periodic follow-up visits were advised to monitor the developing dentition and to ensure enough space for the permanent incisor. How to cite this article: Shakra KA. Management of Unerupted Maxillary Deciduous Central Incisor: A Case Report. Int J Clin Pediatr Dent 2014;7(1):58-60.

Elodontoma in captive southern red-backed voles (Myodes gapperi)

USGS Publications Warehouse

Rodriguez-Ramos Fernandez, Julia; Pinkerton, Marie E.; Heisey, Dennis M.; Drees, Randi; Schneider, Jay; Stickney, Lacey; Hofmeister, Erik K.; Sanchez-Migallon Guzman, David

2010-01-01

Five southern red-backed voles (Myodes gapperi) of the first generation of a wild-caught breeding colony were presented with lesions at the maxillary incisors consistent with elodontoma. The affected animals had a history of chronic weight loss, were >16 months of age, and were siblings. Radiographs of the head showed multiglobular to irregularly outlined mineral opacity masses at the apices of the maxillary incisors. On necropsy, maxillary incisor teeth were not grossly visible, and a gingival ulceration was observed at the expected site of eruption. Microscopically, the apical region of the maxillary incisors was thickened or replaced by irregular dental tissue masses consistent with elodontoma. This is the first report to describe elodontoma in red-backed voles.

``Magical'' fluid pathways: inspired airflow corridors for optimal drug delivery to human sinuses

NASA Astrophysics Data System (ADS)

Basu, Saikat; Farzal, Zainab; Kimbell, Julia S.

2017-11-01

Topical delivery methods like nasal sprays are an important therapeutic component for sinusitis (inflammation and clogging of the paranasal sinuses). The sinuses are air-filled sacs, identified as: maxillaries (under the eyes and deep to cheeks bilaterally; largest in volume), frontals (above and medial to the eyes, behind forehead area), ethmoids (between the eyes, inferior to the frontal sinuses), and sphenoids (superior and posterior to ethmoids). We develop anatomic CT-based 3D reconstructions of the human nasal cavity for multiple subjects. Through CFD simulations on Fluent for measured breathing rates, we track inspiratory airflow in all the models and the corresponding sprayed drug transport (for a commercially available sprayer, with experimentally tested particle size distributions). The protocol is implemented for a wide array of spray release points. We make the striking observation that the same release points in each subject provide better particle deposition in all the sinuses, despite the sinuses being located at different portions of the nasal cavity. This leads to the conjecture that the complicated anatomy-based flow physics artifacts in the nasal canal generate certain ``magical'' streamlines, providing passage for improved drug transport to all sinus targets. Supported by NIH Grant R01 HL122154.

Introduction of a new removable adjustable intraoral maxillary distraction system for correction of maxillary hypoplasia.

PubMed

Figueroa, Alvaro A; Polley, John W; Figueroa, Alexander L

2009-09-01

Distraction osteogenesis has become a treatment alternative to treat severe craniofacial skeletal dysplasias. A rigid external distraction device has been successfully used to advance the maxilla as well as the maxillary, orbital, and forehead complex (monobloc) in children as young as 2 years, adolescents, and adults. For this severe group of patients, the technique has been found to be simpler and safer than traditional surgical methods. Maxillary and midfacial advancement through distraction has been found to be extremely stable in the patients in whom the technique was used.The authors introduce an intraoral distractor for those patients requiring a moderate maxillary advancement. The advantages of the device include ease of insertion, vector adjustability, reactivation capabilities, and no need for second procedure for its removal.The above approaches have provided predictable and stable results. A detailed description of the device, necessary orthodontic and surgical procedures, case reports, and cephalometric outcomes are presented. The techniques can be applied alone or as an adjunct to traditional orthognathic and craniofacial surgical procedures.

Endodontic management of maxillary first molar with seven root canals diagnosed using Cone Beam Computed Tomography scanning

PubMed Central

Raghavendra, Srinidhi Surya; Hindlekar, Ajit Narayan; Desai, Niranjan Nanasaheb; Vyavahare, Nishant Kishor; Napte, Bandu Devrao

2014-01-01

The main objective of root canal treatment is thorough cleaning and shaping of the entire pulp space and its complete filling with an inert filling material. A major cause of post-treatment disease is the inability to locate, debride or adequately fill all canals of the root canal system. The form, configuration, and number of root canals in the maxillary first molars have been discussed for more than half a century. Maxillary first molars commonly present with three roots and three canals, with a second mesiobuccal canal (MB2) also present. With the advent of improved magnification there are reports of multiple root canals in the maxillary first molars. Nonsurgical endodontic therapy of a left maxillary first molar with three roots and seven root canals was successfully performed under a dental operating microscope. The diagnosis of multiple root canals was confirmed with the help of Cone Beam Computed Tomography (CBCT) images. PMID:25565745

Accuracy of maxillary positioning after standard and inverted orthognathic sequencing.

PubMed

Ritto, Fabio G; Ritto, Thiago G; Ribeiro, Danilo Passeado; Medeiros, Paulo José; de Moraes, Márcio

2014-05-01

This study aimed to compare the accuracy of maxillary positioning after bimaxillary orthognathic surgery, using 2 sequences. A total of 80 cephalograms (40 preoperative and 40 postoperative) from 40 patients were analyzed. Group 1 included radiographs of patients submitted to conventional sequence, whereas group 2 patients were submitted to inverted sequence. The final position of the maxillary central incisor was obtained after vertical and horizontal measurements of the tracings, and it was compared with what had been planned. The null hypothesis, which stated that there would be no difference between the groups, was tested. After applying the Welch t test for comparison of mean differences between maxillary desired and achieved position, considering a statistical significance of 5% and a 2-tailed test, the null hypothesis was not rejected (P > .05). Thus, there was no difference in the accuracy of maxillary positioning between groups. Conventional and inverted sequencing proved to be reliable in positioning the maxilla after LeFort I osteotomy in bimaxillary orthognathic surgeries. Copyright © 2014 Elsevier Inc. All rights reserved.

Extraction of Maxillary Central Incisors: An Orthodontic-Restorative Treatment

PubMed Central

Hedayati, Zohreh; Zare, Maryam; Bahramnia, Fateme

2014-01-01

Malformed central incisors with poor prognosis could be candidates for extraction especially in crowded dental arches. This case report refers to a 12-year-old boy who suffered from malformed upper central incisors associated with severe attrition. Upper lateral incisors were positioned palatally and canines were rotated and positioned in the high buccal area. The patient had class II malocclusion and space deficiency in both dental arches. Due to incisal wear and malformed short maxillary central incisors and the need for root canal therapy with a major crown build-up, these teeth were extracted. The maxillary lateral incisors were substituted. Thus the maxillary canines were substituted for lateral incisors and the first premolars were substituted for canines. In the lower dental arch the first bicuspids were extracted. Composite resin build-up was performed on the maxillary lateral incisors and canines. This allowed for the crowding and the malocclusion to be corrected. Subsequent gingivectomy improved the patient's gingival margins and smile esthetics one month after orthodontic therapy. PMID:25400954

The use of maxillary sinus dimensions in gender determination: a thin-slice multidetector computed tomography assisted morphometric study.

PubMed

Ekizoglu, Oguzhan; Inci, Ercan; Hocaoglu, Elif; Sayin, Ibrahim; Kayhan, Fatma Tulin; Can, Ismail Ozgur

2014-05-01

Gender determination is an important step in identification. For gender determination, anthropometric evaluation is one of the main forensic evaluations. In the present study, morphometric analysis of maxillary sinuses was performed to determine gender. For morphometric analysis, coronal and axial paranasal sinus computed tomography (CT) scan with 1-mm slice thickness was used. For this study, 140 subjects (70 women and 70 men) were enrolled (age ranged between 18 and 63). The size of each subject's maxillary sinuses was measured in anteroposterior, transverse, cephalocaudal, and volume directions. In each measurement, the size of the maxillary sinus is significantly small in female gender (P < 0.001). When discrimination analysis was performed, the accuracy rate was detected as 80% for women and 74.3% for men with an overall rate of 77.15%. With the use of 1-mm slice thickness CT, morphometric analysis of maxillary sinuses will be helpful for gender determination.

Bilateral maxillary fused second and third molars: a rare occurrence

PubMed Central

Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

2012-01-01

This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the second molar. However, CBCT revealed that a third molar was fused to the second molar. Unexpectedly, the maxillary left third molar also was fused to the second molar, and the crown of an unerupted supernumerary fourth molar was possibly also fused to the apical root region of the second molar. Operative procedures should not be attempted without adequate radiographic investigation. CBCT allowed the precise location of the root canals of the right maxillary fused molar teeth to permit successful endodontic therapy, confirmed after 6 months. PMID:23222992

Bilateral maxillary fused second and third molars: a rare occurrence.

PubMed

Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

2012-12-01

This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the second molar. However, CBCT revealed that a third molar was fused to the second molar. Unexpectedly, the maxillary left third molar also was fused to the second molar, and the crown of an unerupted supernumerary fourth molar was possibly also fused to the apical root region of the second molar. Operative procedures should not be attempted without adequate radiographic investigation. CBCT allowed the precise location of the root canals of the right maxillary fused molar teeth to permit successful endodontic therapy, confirmed after 6 months.

Long-term follow-up of early cleft maxillary distraction.

PubMed

Park, Young-Wook; Kwon, Kwang-Jun; Kim, Min-Keun

2016-12-01

Most of cleft lip and palate patients have the esthetic and functional problems of midfacial deficiencies due to innate developmental tendency and scar tissues from repeated operations. In these cases, maxillary protraction is required for the harmonious facial esthetics and functional occlusion. A 7-year old boy had been diagnosed as severe maxillary constriction due to unilateral complete cleft lip and palate. The author tried to correct the secondary deformity by early distraction osteogenesis with the aim of avoiding marked psychological impact from peers of elementary school. From 1999 to 2006, repeated treatments, which consisted of Le Fort I osteotomy and face mask distraction, and complementary maxillary protraction using miniplates were performed including orthodontics. But, final facial profile was not satisfactory, which needs compromising surgery. The result of this study suggests that if early distraction treatment is performed before facial skeletal growth is completed, an orthognathic surgery or additional distraction may be needed later. Maxillofacial plastic and reconstructive surgeons should notify this point when they plan early distraction treatment for cleft maxillary deformity.

Maxillary distraction osteogenesis using Le Fort I osteotomy without intraoperative down-fracture.

PubMed

Yamauchi, K; Mitsugi, M; Takahashi, T

2006-06-01

The aim of this study is to present a technique for maxillary distraction osteogenesis using Le Fort I osteotomy without down-fracture. Six cleft-related patients suffering from severe midfacial deficiency were treated with maxillary distraction osteogenesis. The RED II system was chosen as the extraoral device and the Leipzig retention plate system to anchor the maxillary segment. Maxillary distraction osteogenesis was successful in all cases. Cephalometric and clinical evaluation after an average follow-up period of 1 year showed stable results with respect to skeletal and dental relationships. The SNA angle increased from 72.3 degrees to 81.4 degrees and the ANB angle increased by 11.0 degrees immediately after removing the distraction device. After 1 year, the sagittal bone gain remained and the SNA angle had decreased by 0.8 degrees . This technique seems to minimize the risk of the surgical procedure and shorten the operation time. It may become an alternative method for the treatment of patients with severe midfacial hypoplasia.

The role of computer-aided 3D surgery and stereolithographic modelling for vector orientation in premaxillary and trans-sinusoidal maxillary distraction osteogenesis.

PubMed

Varol, Altan; Basa, Selçuk

2009-06-01

Maxillary distraction osteogenesis is a challenging procedure when it is performed with internal submerged distractors due to obligation of setting accurate distraction vectors. Five patients with severe maxillary retrognathy were planned with Mimics 10.01 CMF and Simplant 10.01 software. Distraction vectors and rods of distractors were arranged in 3D environment and on STL models. All patients were operated under general anaesthesia and complete Le Fort I downfracture was performed. All distractions were performed according to orientated vectors. All patients achieved stable occlusion and satisfactory aesthetic outcome at the end of the treatment period. Preoperative bending of internal maxillary distractors prevents significant loss of operation time. 3D computer-aided surgical simulation and model surgery provide accurate orientation of distraction vectors for premaxillary and internal trans-sinusoidal maxillary distraction. Combination of virtual surgical simulation and stereolithographic models surgery can be validated as an effective method of preoperative planning for complicated maxillofacial surgery cases.

Bone chip-induced rhinosinusitis.

PubMed

Reilly, Brian K; Conley, David B

2009-12-01

This case report describes both the pathophysiology and management of chronic rhinosinusitis (CRS). Specifically, we report a case of chronic maxillary rhinosinusitis with a free-floating maxillary sinus calcification (bone chip). After obtaining the computed tomography scan, the patient underwent endoscopic sinus surgery, with removal of the uncinate, enlargement of the diseased natural ostium of the maxillary sinus, and removal of the diseased bone chip. This eliminated the nidus for infection, ultimately restoring mucociliary flow.

Structure, ontogeny and evolution of the patellar tendon in emus (Dromaius novaehollandiae) and other palaeognath birds

PubMed Central

Pitsillides, Andrew A.; Hutchinson, John R.

2014-01-01

The patella (kneecap) exhibits multiple evolutionary origins in birds, mammals, and lizards, and is thought to increase the mechanical advantage of the knee extensor muscles. Despite appreciable interest in the specialized anatomy and locomotion of palaeognathous birds (ratites and relatives), the structure, ontogeny and evolution of the patella in these species remains poorly characterized. Within Palaeognathae, the patella has been reported to be either present, absent, or fused with other bones, but it is unclear how much of this variation is real, erroneous or ontogenetic. Clarification of the patella’s form in palaeognaths would provide insight into the early evolution of the patella in birds, in addition to the specialized locomotion of these species. Findings would also provide new character data of use in resolving the controversial evolutionary relationships of palaeognaths. In this study, we examined the gross and histological anatomy of the emu patellar tendon across several age groups from five weeks to 18 months. We combined these results with our observations and those of others regarding the patella in palaeognaths and their outgroups (both extant and extinct), to reconstruct the evolution of the patella in birds. We found no evidence of an ossified patella in emus, but noted its tendon to have a highly unusual morphology comprising large volumes of adipose tissue contained within a collagenous meshwork. The emu patellar tendon also included increasing amounts of a cartilage-like tissue throughout ontogeny. We speculate that the unusual morphology of the patellar tendon in emus results from assimilation of a peri-articular fat pad, and metaplastic formation of cartilage, both potentially as adaptations to increasing tendon load. We corroborate previous observations of a ‘double patella’ in ostriches, but in contrast to some assertions, we find independent (i.e., unfused) ossified patellae in kiwis and tinamous. Our reconstructions suggest a single evolutionary origin of the patella in birds and that the ancestral patella is likely to have been a composite structure comprising a small ossified portion, lost by some species (e.g., emus, moa) but expanded in others (e.g., ostriches). PMID:25551026

The microbiome of the maxillary sinus and middle nasal meatus in chronic rhinosinusitis.

PubMed

Ivanchenko, O A; Karpishchenko, S A; Kozlov, R S; Krechikova, O I; Otvagin, I V; Sopko, O N; Piskunov, G Z; Lopatin, A S

2016-03-01

This multicenter study was focused on the identification of the microorganisms inhabiting the maxillary sinus and middle nasal meatus in chronic rhinosinusitis. 112 middle meatus swabs and 112 maxillary sinus aspirates from 103 patients were available for culture. A total of 244 strains of microorganisms representing more than 50 families were identified in the maxillary sinus and middle nasal meatus (164 and 80, respectively). These included 154 (63.0%) strains of aerobic bacteria from 32 species and 90 (37.0%) strains of anaerobic bacteria from 23 species. Aerobes were more common than anaerobes in both the nasal cavity (78.7% vs. 21.3%) and in the maxillary sinus (55.2% vs. 44.8%). Species of Streptococci (28.8%) and Prevotella (17.8%) were the most common findings in the maxillary sinus aspirates. S. pneumonia, H. influenza, and S. aureus were relatively rare, and found in only 6.7%, 5.4%, and 8.9% of the samples, respectively. The results obtained suggest that common upper airway pathogens do not play a major role in the pathogenesis of chronic rhinosinusitis. The microbiome of inflamed sinonasal mucosa is extremely diverse and involves exotic species of bacteria that, to date, have not been considered as potential inhabitants of the paranasal sinuses.

Transverse maxillary deficit and its influence on the cervical vertebrae maturation index.

PubMed

Cossellu, G; Farronato, G; Nicotera, O; Biagi, R

2016-06-01

The aim of this study is to evaluate whether a transverse maxillary deficit can cause an alteration of vertebral development and therefore of the skeletal maturation comparing the cervical maturation stages index with the hand-wrist index. For the study were selected 200 patients aged 7-14 years, equally distributed by gender and divided into 100 study subjects with maxillary deficit and 100 controls without maxillary deficit. The skeletal maturation index (SM according to Fishman) was evaluated and compared with the hand-wrist x-rays and the cervical vertebrae maturation (CVM according to Hassel and Farmann). Forty-one per cent of the subjects in the test group show a discrepancy between CVM and SM. Among these 73% (30 subjects) present an advanced stage of CVM compared with the corresponding SM. Only 16% of the subjects in the control group show a discrepancy between CVM and SM. Among these 69% (11 subjects) appear in an advanced CVM stage. The analysis of the CVM stage in subjects with transverse maxillary deficit appears to be altered compared with the SM identified through a hand-wrist x-ray. In the case of individuals with transverse maxillary deficit it is advisable to use also a hand-wrist x-ray, thus not relying only on CVM for the evaluation of the skeletal growth stages.

Three-dimensional evaluation of upper airway following rapid maxillary expansion: a CBCT study.

PubMed

El, Hakan; Palomo, Juan Martin

2014-03-01

To evaluate, by using cone beam computed tomography, the skeletal, dental, oropharyngeal (OP) airway volume, and nasal passage (NP) volume changes that occur after rapid maxillary expansion (RME). Two groups were selected, each with 35 patients (15 males, 20 females), an RME group (mean age, 14.02 ± 1.46 years) and a control group (mean age, 14.10 ± 1.44 years). The RME group consisted of patients with maxillary constriction who were treated with Hyrax palatal expanders, and the control group comprised age- and sex-matched patients who underwent comprehensive orthodontic treatment without the use of a rapid maxillary expander. All of the transverse skeletal (medial orbital width, lateral nasal width, maxillary width, and mandibular width) and interdental (intermolar, interpremolar, and intercanine) parameters were significantly enlarged in the RME group. A statistically significant increase in airway variables was seen in both groups between pretreatment (T0) and final records (T1). The mean increase of NP airway volume for the RME group (1719.9 ± 1510.7 mm(3)) was twofold compared with the control group (813.6 ± 1006.7 mm(3)), and no intergroup significant difference was found for the OP volume. Rapid maxillary expansion creates a significant increase in nasal passage airway volume but no significant change in the oropharyngeal airway volume.

Influence of Palatal Coverage and Implant Distribution on Denture Strain in Maxillary Implant Overdentures.

PubMed

Takahashi, Toshihito; Gonda, Tomoya; Tomita, Akiko; Mizuno, Yoko; Maeda, Yoshinobu

2016-01-01

As maxillary implant overdentures are being increasingly used in clinical practice, prosthodontic complications related to these dentures are also reported more often. The purpose of this study was to examine the influence of palatal coverage and implant distribution on the shear strain of maxillary implant overdentures. A maxillary edentulous model with implants inserted in the anterior, premolar, and molar areas was fabricated. Two kinds of experimental overdentures, with and without palatal coverage, were also fabricated, and two strain gauges were attached at the midline of the labial and palatal sides. A vertical occlusal load of 98 N was applied through a mandibular complete denture, and the shear strain in each denture was compared by analysis of variance (P = .05). In all situations, the shear strain in palateless dentures was significantly higher than in dentures with palate on both sides (P < .05). In dentures with palate, the shear strain was lower when anterior implants were present. Palateless maxillary implant overdentures exhibited much higher strain than overdentures with palate regardless of the implant distribution; this may cause more prosthodontic and implant complications. The most favorable configuration to prevent complications in maxillary implant overdentures was palatal coverage that was supported by more than four widely distributed implants.

Is there a correlation between nasal septum deviation and maxillary transversal deficiency? A retrospective study on prepubertal subjects.

PubMed

Ballanti, Fabiana; Baldini, Alberto; Ranieri, Salvatore; Nota, Alessandro; Cozza, Paola

2016-04-01

Deviated nasal septum may cause a reduction of the nasal airflow, thus, during the craniofacial development, a reduced nasal airflow could originate a chronic mouth-breathing pattern, related with moderate to severe maxillary constriction. The aim of this retrospective study is to analyze the correlation between maxillary transverse deficiency and nasal septum deviation. Frontal cephalograms were performed on 66 posterior-anterior radiographs of subjects (34M, 32F; mean age 9.95±2.50 years) with maxillary transverse deficiency and on a control group of 31 posterior-anterior radiographs of subjects (13M, 18F; 9.29±2.08 years). Angular parameters of the nasal cavities were recorded and compared between the two groups using a Student's t-test. Generally all the parameters are very similar between the two groups except for the ASY angle that differs for about the 27%; anyway the Student's t-test showed no statistically significant differences between the two groups (mostly p>0.20). This study failed to show an association between transverse maxillary deficiencies and nasal septum deviations. Moreover, no significant differences were found between the mean nasal cavities dimensions in subjects with transverse maxillary deficiency and the control group. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Photometric Evaluation of Soft Tissue Changes in CLP Patients: Le Fort I Advancement Osteotomy (ALO) Versus Anterior Maxillary Distraction (AMD).

PubMed

Paulose, Joby; Markose, Eldho

2014-12-01

This paper is a comparative photometric evaluation of soft tissue changes in patients with CLP associated with maxillary deficiency treated with conventional Le Fort I advancement osteotomy (ALO) and anterior maxillary distraction (AMD). Twenty patients with maxillary hypoplasia associated with cleft lip and palate who had undergone either LeFort I osteotomy or distraction osteogenesis with maxillary advancement were included in this study. Frontal and profile photographs were used to ascertain the changes post-surgically. Photographs were obtained before treatment and 1 year after surgical correction in both groups. Vertical as well as horizontal changes in pronasale was well observed in both groups. A substantial increase in nasal parameters was noted in case of AMD group in comparison to ALO group. Though maxillary advancement was quite evident in AMD and ALO groups, a significant and consistent change was observed in AMD group. Significant vertical and horizontal changes were seen with respect to subnasale and labrale superius in AMD group. The hard and soft tissue changes produced by AMD by intra oral distractors were being evaluated so far. The results of the above studies have proved the excellence of AMD over conventional osteotomies. The present study goes hand in hand with the research outcomes till date.

Root Cause Analysis: An Examination of Odontogenic Origins of Acute Maxillary Sinusitis in Both Immunocompetent & Immunocompromised Patients.

PubMed

McCarty, Jennifer L; David, Ryan M; Lensing, Shelly Y; Samant, Rohan S; Kumar, Manoj; Van Hemert, Rudy L; Angtuaco, Edgardo J C; Fitzgerald, Ryan T

Dental and periodontal diseases represent important but often overlooked causes of acute sinusitis. Our goal was to examine the prevalence of potential odontogenic sources of acute maxillary sinusitis according to immune status and their associations with sinusitis. A retrospective review of maxillofacial computed tomography studies from 2013 to 2014 was performed. Each maxillary sinus and its ipsilateral dentition were evaluated for findings of acute sinusitis and dental/periodontal disease. Eighty-four patients (24 immunocompetent, 60 immunocompromised) had 171 maxillary sinuses that met inclusion criteria for acute maxillary sinusitis. Inspection of dentition revealed oroantral fistula in 1%, periapical lucencies in 16%, and projecting tooth root(s) in 71% of cases. Immunocompromised patients were more likely to have bilateral sinusitis than immunocompetent patients (67% vs 33%, P = 0.005). A paired case-control analysis in a subset of patients with unilateral maxillary sinusitis (n = 39) showed a higher prevalence of periapical lucency in association with sinuses that had an air fluid level-29% of sinuses with a fluid level had periapical lucency compared with 12% without sinus fluid (P = 0.033). Potential odontogenic sources of acute maxillary sinusitis are highly prevalent in both immunocompetent and immunocompromised patients, although the 2 patient populations demonstrate no difference in the prevalence of these potential odontogenic sources. Periapical lucencies were found to be associated with an ipsilateral sinus fluid level. Increased awareness of the importance of dental and periodontal diseases as key components of maxillofacial computed tomography interpretation would facilitate a more appropriate and timely treatment.

Nonsurgical periodontal therapy to treat a case of severe periodontitis: A 12-year follow-up.

PubMed

Carnio, João; Moreira, Ana Karina; Jenny, Todd; Camargo, Paulo M; Pirih, Flavia Q

2015-08-01

This case report describes the successful treatment of a severe chronic periodontitis case by nonsurgical therapy and a strict maintenance program over a 12-year period. A 38-year-old man concerned about the protrusion of his maxillary incisors was referred for periodontal treatment. The teeth in the maxillary arch had generalized severe chronic periodontitis. Several treatment options were presented to the patient including the most aggressive, extraction of all maxillary teeth, and the most conservative, scaling and root planing. The patient opted to having the most conservative approach, even though the prognoses for the maxillary teeth were unfavorable. Therefore, he received nonsurgical therapy via scaling and root planing combined with systemic antibiotics before referral to an orthodontist to address the esthetic concerns. The maxillary dentition was treated with orthodontic therapy to retract and align the maxillary anterior segment. Periodontal maintenance (1-hour session), including subgingival instrumentation, was performed 4 times per year until the end of the 12-year follow-up period. The patient only missed 2 appointments in 12 years. Twelve years later, the results revealed that all but 1 maxillary tooth were maintained in a state of acceptable health, function, and esthetics. Although most would agree with the initial poor prognosis of this patient's case, nonsurgical periodontal therapy was utilized with a 3-month periodontal maintenance program and demonstrated long-term success. The outcome presented in this case report may only have been possible because of patient compliance, professional experience, skill, and supervision throughout the course of treatment. Copyright © 2015 American Dental Association. Published by Elsevier Inc. All rights reserved.

Maxillary hypoplasia in the cleft patient: contribution of orthodontic dental space closure to orthognathic surgery.

PubMed

Lee, Justine C; Slack, Ginger C; Walker, Ryann; Graves, Lindsay; Yen, Sandra; Woo, Jessica; Ambaram, Rishal; Martz, Martin G; Kawamoto, Henry K; Bradley, James P

2014-02-01

Cleft lip and palate surgery in the developing child is known to be associated with maxillary hypoplasia. However, the effects of nonsurgical manipulations on maxillary growth have not been well investigated. The authors present the contribution of orthodontic dental space closure with canine substitution to maxillary hypoplasia and the need for orthognathic surgery. Cleft lip/palate and cleft palate patients older than 15 years of age were reviewed for dental anomalies, orthodontic canine substitution, and Le Fort I advancement. Skeletal relationships of the maxilla to the skull base (SNA), mandible (ANB), and facial height were determined on lateral cephalograms. Logistic regression analyses were performed to estimate odds ratios. Ninety-five patients were reviewed (mean age, 18.1 years). In 65 patients with congenitally missing teeth, 55 percent with patent dental spaces required Le Fort I advancement. In contrast, 89 percent who underwent canine substitution required Le Fort I advancement (p = 0.004). Canine substitution is associated with a statistically significant increase in maxillary retrognathia when compared with dental space preservation on lateral cephalograms (mean SNA, 75.2 and 79.0, respectively; p = 0.006). Adjusting for missing dentition, logistic regression analyses demonstrated that canine substitution is an independent predictor for orthognathic surgery (OR, 6.47) and maxillary retrusion defined by SNA < 78 (OR, 8.100). The coordination of orthodontia and surgery is essential to cleft care. The authors report a strong association between orthodontic cleft closure using canine substitution with maxillary hypoplasia and subsequent Le Fort I advancement, and suggest systematic criteria for management of cleft-related dental agenesis. Therapeutic, III.

Root canal treatment of a periradicular lesion caused by unintentional root damage after orthodontic miniscrew placement: a case report.

PubMed

Er, K; Bayram, M; Taşdemir, T

2011-12-01

To present the successful endodontic management of a maxillary lateral incisor tooth with a periradicular lesion caused by unintentional root damage after orthodontic miniscrew placement. A 22-year-old female was diagnosed with a skeletal Class II, Division 2 malocclusion with Class II molar and canine relationships on both sides. The treatment plan included distalization of the maxillary first molars bilaterally followed by full fixed appliance therapy. For the maxillary molar distalization, an appliance in conjunction with a miniscrew anchorage system was designed. Two months later, the patient came to the clinic with complaints of pain in the maxillary right lateral incisor region. On intraoral examination, intraoral sinus tracts were detected in the maxillary right buccal sulcus and palate. A large radiolucent lesion with a well-defined margin around the root of the maxillary right lateral incisor was seen. Root canal treatment was performed on the maxillary right lateral incisor tooth. The root canal was filled with gutta-percha and AH Plus sealer, using a lateral compaction technique. The final restoration of the tooth was completed using composite, and the tooth was reviewed after 10 months. The tooth was asymptomatic and radiographically showed repair of the lesion. Healing was achieved without any need for further endodontic or surgical intervention. Key learning points • This case illustrates the need to take care with miniscrews when performing orthodontic treatment, especially when the miniscrews are in close proximity to root apices. • The periradicular lesion as a result of miniscrew damage was successfully treated with root canal treatment. © 2011 International Endodontic Journal.

Changes in the edentulous maxilla with ball and telescopic attachments of implant-retained mandibular overdentures: a 4-year retrospective study.

PubMed

Elsyad, Moustafa Abdou; Khairallah, Ahmed Samir; Shawky, Ahmad Fathalla

2013-07-01

This retrospective study investigated the clinical and radiographic changes in the edentulous maxilla in patients with either ball or telescopic attachments of implantretained mandibular overdentures. Thirty-two completely edentulous patients (21 males and 11 females) received two implants in the canine region of the mandible. New maxillary complete dentures and mandibular overdentures were fabricated. Overdentures were connected to the implants either with ball (group 1, n = 16) or telescopic (group 2, n = 16) attachments. Retention and stability of the maxillary denture as well as mucosal changes of the maxillary ridge were recorded after 4 years of denturewearing. Traced rotational tomograms were used for measurements of maxillary alveolar bone loss. The proportional value between bone areas and areas of reference not subject to resorption was expressed as a ratio (R). Change in R immediately before (T0) and after 4 years (T4) of overdenture insertion was calculated for the anterior and posterior regions of the maxilla. After 4 years of denture-wearing, maxillary denture retention was significantly higher in group 1 than in group 2, while occurrence of flabby ridges was significantly higher in group 2 than in group 1. The change in R of the anterior region of the maxilla was significantly higher than the change in the posterior region in both groups. Group 2 showed significant anterior residual ridge resorption compared to group 1. Telescopic attachments for implant-retained mandibular overdentures are associated with increased maxillary ridge resorption and flabbiness, and decreased maxillary denture retention when compared to ball attachments.

Evaluation of maxillary anterior teeth and their relation to the golden proportion in Malaysian population.

PubMed

Al-Marzok, Maan Ibrahim; Majeed, Kais Raad Abdul; Ibrahim, Ibrahim Khalil

2013-01-24

The maxillary anterior teeth are important in achieving pleasing dental aesthetics. Various methods are used to measure the size and form of them, including the golden proportion between their perceived widths, and the width-to-height ratio, referred to as the golden standard. The purpose of this study was conducted to evaluate whether consistent relationships exist between tooth width and height of the clinical crown dimensions; and to investigate the occurrence of the golden proportion of the maxillary anterior teeth. Dental casts of the maxillary arches were made in this cross-sectional study from MAHSA University College students who met the inclusion criteria. The 49 participants represented the Malaysian population main ethnics. The dimensions of the anterior teeth and the perceived width of anterior teeth viewed from front were measured using a digital caliper. Comparison of the perceived width ratio of lateral to central incisor and canine to lateral incisor with the golden proportion of 0.618 revealed there were a significant statistical difference (p < 0.05). The statistical difference was significant for the width-to-height ratio of central incisors to the golden standard of 80%. There was no significant difference in the comparison among ethnic groups for the golden proportion and the golden standard. The golden proportion was not found to exist between the perceived widths of maxillary anterior teeth. No golden standard were detected for the width-to-height proportions of maxillary incisors. Specific population characteristics and perception of beauty must be considered. However, ethnicity has no association with the proportions of maxillary anterior teeth.

Skeletal and soft tissue changes and stability in cleft lip and palate patients after distraction osteogenesis using a new intraoral maxillary device.

PubMed

Ansari, Edward; Tomat, Catherine; Kadlub, Natacha; Diner, Patrick A; Bellocq, Thomas; Vazquez, Marie-Paule; Picard, Arnaud

2015-04-01

The authors have recently reported on the use of an internal maxillary distraction device. In this study, we report on the hard and soft tissue movements achieved with this intraoral distraction device, and the stability changes after distraction osteogenesis for maxillary hypoplasia in patients with cleft lip and palate. Ten male patients with severe hypoplasia of the maxilla, with complete uni- or bilateral cleft lip and palate were included. The mean age of the patients at the time of operation was 11.91 years (±3.41). To evaluate the distraction process and stability, superimpositions on the preoperative lateral cephalograms were performed. The mean follow-up (FU) was 15.42 months (±3.94). Cephalometric measurements at all of the maxillary hard and soft tissue points improved significantly. Maxillary point A was advanced by 8.25 mm (±3.17; P < 0.001). After distraction soft tissue point A' had advanced 7.10 mm (±2.69; P < 0.001). The soft tissue to hard tissue ratio at point A was 0.86:1 after distraction. Maxillary horizontal relapse at point A was 14.1% at FU. Vertical relapse was not significant. This rigid intraoral distraction device can be successfully used in the correction of severe maxillary hypoplasia. The marked aesthetic improvement and low psychological encumbrance make this device viable for the treatment of cleft-related hypoplasia of the maxilla. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Assessment of vertical changes during maxillary expansion using quad helix or bonded rapid maxillary expander.

PubMed

Conroy-Piskai, Cara; Galang-Boquiren, Maria Therese S; Obrez, Ales; Viana, Maria Grace Costa; Oppermann, Nelson; Sanchez, Flavio; Edgren, Bradford; Kusnoto, Budi

2016-11-01

To determine if there is a significantly different effect on vertical changes during phase I palatal expansion treatment using a quad helix and a bonded rapid maxillary expander in growing skeletal Class I and Class II patients. This retrospective study looked at 2 treatment groups, a quad helix group and a bonded rapid maxillary expander group, before treatment (T1) and at the completion of phase I treatment (T2). Each treatment group was compared to an untreated predicted growth model. Lateral cephalograms at T1 and T2 were traced and analyzed for changes in vertical dimension. No differences were found between the treatment groups at T1, but significant differences at T2 were found for convexity, lower facial height, total facial height, facial axis, and Frankfort Mandibular Plane Angle (FMA) variables. A comparison of treatment groups at T2 to their respective untreated predicted growth models found a significant difference for the lower facial height variable in the quad helix group and for the upper first molar to palatal plane (U6-PP) variable in the bonded expander group. Overall, both the quad helix expander and the bonded rapid maxillary expander showed minimal vertical changes during palatal expansion treatment. The differences at T2 suggested that the quad helix expander had more control over skeletal vertical measurements. When comparing treatment results to untreated predicted growth values, the quad helix expander appeared to better maintain lower facial height and the bonded rapid maxillary expander appeared to better maintain the maxillary first molar vertical height.

Effectiveness of TAD-anchored maxillary protraction in late mixed dentition.

PubMed

Feng, Xiaoxia; Li, Jianhua; Li, Yu; Zhao, Zhihe; Zhao, Sen; Wang, Jue

2012-11-01

To evaluate the effectiveness of temporary anchorage device (TAD)-anchored maxillary protraction (MP) in terms of the skeletal and dentoalveolar changes and to compare it with traditional tooth-anchored MP. A computerized literature search for relative randomized controlled trials and prospective controlled trials was performed in PubMed, MEDLINE, Cochrane Central Register of Controlled Trials, Embase, CNKI, and Google Scholar, complemented with manual search. Data extraction and quality assessment were carried out by two reviewers independently. Meta-analysis was followed when possible; otherwise, description was done. Forty articles were found, among which four trials were qualified for meta-analysis. The results showed that there was significant difference between TAD-anchored MP and untreated control in terms of maxillary advancement (weighted mean differences (WMD) 3.08 mm; 95% CI: 1.61 to approximately 4.56; P < .0001), but there were no consistent points in terms of mandibular rotation. Also, there were significant differences between both treatment patterns regarding maxillary advancement (WMD 1.41 mm; 95% CI: 0.47 to approximately 2.35; P  =  .003), mandibular rotation (WMD -1.39°, 95% CI: -2.47 to approximately -0.31; P  =  .01), proclination of maxillary incisors (WMD -2.29°; 95% CI: -4.41 to approximately -0.17; P  =  .03), and extrusion of maxillary molars (WMD -1.68 mm; 95% CI: -2.51 to approximately -0.85; P < .0001). According to the present results, TAD-anchored MP might have a greater maxillary advancement effect and might reduce skeletal and dental side effects, compared with tooth-anchored MP.

Maxillary unicystic ameloblastoma: a case report.

PubMed

Agani, Zana; Hamiti-Krasniqi, Vjosa; Recica, Jehona; Loxha, Mergime Prekazi; Kurshumliu, Fisnik; Rexhepi, Aida

2016-10-18

Ameloblastoma is a benign epithelial odontogenic tumor. It is often aggressive and destructive, with the capacity to attain great size, erode bone and invade adjacent structures. Unicystic ameloblastoma is a rare odontogenic lesion, with clinical, radiographic and gross features of jaw cysts. The lesion histologically shows typical ameloblastomatous epithelium lining part of the cyst cavity with or without and/or mural tumor growth. Unicystic ameloblastoma usually presents in posterior mandibular ramus region, while it is rare and atypical in posterior maxillary region. . We report a case of 16 year old Kosovar male, Albanian ethnicity, who presented with a swelling located in right maxillary region. Clinical examination revealed a painless swelling extending from the maxillary right central incisor to the maxillary right first molar tooth. Panoramic radiograph disclosed a well corticated unilocular radiolucent lesion approximately 5 × 5 cm in diameter which was in contact with the roots of the teeth present inferiorly and with the maxillary sinus superiorly. Maxillary right canine impaction was noted and unerupted lateral incisor tooth was present inside the radiolucency. Preoperative diagnosis of the lesion was made as dentigerous cyst based on the age of the patient, location of the swelling, clinical and radiographic findings, but the unicystic ameloblastoma was also taken into consideration. The patient was treated by surgical enucleation of the lesion and extraction of lateral incisor tooth which was present inside the lesion. The histopathological examination of the lesion revealed confirmed finding for unicystic ameloblastoma mural form. No recurrence was observed in 1 year follow-up. Maxillary region is considered a rare and atypical location for unicystic ameloblastoma. We emphasize the importance of differential diagnosis of an odontogenic lesion with common clinical and radiological features that will impact the treatment planning and follow up. As oral health providers we should be aware that the unilocular radiolucencies may be unicystic ameloblastoma.

Effects of the pendulum appliance, cervical headgear, and 2 premolar extractions followed by fixed appliances in patients with Class II malocclusion.

PubMed

de Almeida-Pedrin, Renata Rodrigues; Henriques, José Fernando Castanha; de Almeida, Renato Rodrigues; de Almeida, Marcio Rodrigues; McNamara, James A

2009-12-01

In this retrospective study, we compared the cephalometric effects, the dental-arch changes, and the efficiency of Class II treatment with the pendulum appliance, cervical headgear, or extraction of 2 maxillary premolars, all associated with fixed appliance therapy. The sample of 82 patients with Class II malocclusion was divided into 3 groups: group 1 patients (n = 22; treatment time, 3.8 years) were treated with the pendulum appliance and fixed orthodontic appliances. Group 2 patients (n = 30; treatment time, 3.2 years) were treated with cervical headgear followed by fixed appliances; group 3 patients (n = 30; treatment time, 2.1 years) were treated with 2 maxillary premolar extractions and fixed appliances. The average starting ages of the groups ranged from 13.2 to 13.8 years. Data were obtained from serial cephalometric measurements and dental casts. The dental casts were analyzed with the treatment priority index. The treatment efficiency index was also used. The 3 treatment protocols produced similar cephalometric effects, especially skeletally. Comparisons among the 2 distalizing appliances (pendulum and cervical headgear) and extraction of 2 maxillary premolars for Class II treatment showed changes primarily in the maxillary dentoalveolar component and dental relationships. The facial profile was similar after treatment, except for slightly more retrusion of the upper lip in the extraction patients. The treatment priority index demonstrated that occlusal outcomes also were similar among the groups. The treatment efficiency index had higher values for the extraction group. The effects of treatment with the pendulum appliance or cervical headgear and extraction of 2 maxillary premolars associated with fixed appliances were similar from both occlusal and cephalometric standpoints. Class II treatment with extraction of maxillary teeth was more efficient because of the shorter treatment time. Differences in maxillary incisor retraction should be noted, but these differences might have been due to greater maxillary dentoalveolar protrusion in the extraction group before treatment.

Preliminary three-dimensional analysis of tooth movement and arch dimension change of the maxillary dentition in Class II division 1 malocclusion treated with first premolar extraction: conventional anchorage vs. mini-implant anchorage.

PubMed

Park, Heon-Mook; Kim, Byoung-Ho; Yang, Il-Hyung; Baek, Seung-Hak

2012-12-01

This study aimed to compare the effects of conventional and orthodontic mini-implant (OMI) anchorage on tooth movement and arch-dimension changes in the maxillary dentition in Class II division 1 (CII div.1) patients. CII div.1 patients treated with extraction of the maxillary first and mandibular second premolars and sliding mechanics were allotted to conventional anchorage group (CA, n = 12) or OMI anchorage group (OA, n = 12). Pre- and post-treatment three-dimensional virtual maxillary models were superimposed using the best-fit method. Linear, angular, and arch-dimension variables were measured with software program. Mann-Whitney U-test and Wilcoxon signed-rank test were performed for statistical analysis. Compared to the CA group, the OMI group showed more backward movement of the maxillary central and lateral incisors and canine (MXCI, MXLI, MXC, respectively; 1.6 mm, p < 0.001; 0.9 mm, p < 0.05; 1.2 mm, p < 0.001); more intrusion of the MXCI and MXC (1.3 mm, 0.5 mm, all p < 0.01); less forward movement of the maxillary second premolar, first, and second molars (MXP2, MXM1, MXM2, respectively; all 1.0 mm, all p < 0.05); less contraction of the MXP2 and MXM1 (0.7 mm, p < 0.05; 0.9 mm, p < 0.001); less mesial-in rotation of the MXM1 and MXM2 (2.6°, 2.5°, all p < 0.05); and less decrease of the inter-MXP2, MXM1, and MXM2 widths (1.8 mm, 1.5 mm, 2.0 mm, all p < 0.05). In treatment of CII div.1 malocclusion, OA provided better anchorage and less arch-dimension change in the maxillary posterior teeth than CA during en-masse retraction of the maxillary anterior teeth.

The effectiveness of pendulum, K-loop, and distal jet distalization techniques in growing children and its effects on anchor unit: A comparative study.

PubMed

Marure, Pravinkumar S; Patil, Raju Umaji; Reddy, Sumitra; Prakash, Amit; Kshetrimayum, Nillachandra; Shukla, Rajeevkumar

2016-01-01

A common strategy to correct Class II malocclusions using a nonextraction protocol in children is to move the maxillary molars distally using molar distalization appliances, which usually derive their anchorage from maxillary premolars, causing mesialization of premolars and protrusion of incisors. To evaluate the skeletal, dental and soft tissue changes produced by three different distalizing appliances, namely, pendulum, K-loop, and distal jet appliances. Sixty-six children of mean age 14.13 years requiring molar distalization were divided into three groups: Group I (pendulum appliance), Group II (K-loop), and Group III (distal jet). Lateral cephalometric films were taken before and after 5 months of molar distalization and following cephalometric parameters were used to assess the effects of maxillary molar distalization, namely, anteroposterior skeletal (SNA/SNB/ANB), vertical skeletal (face height ratio/Frankfort-mandibular plane [FMA]/angle formed between Maxillary plane & Mandibular plane (MM)), interdental (overjet/overbite), maxillary dentoalveolar, and soft tissue parameters. There was no significant age difference between the three groups. In overall treatment changes among the three groups, the Anteroposterior skeletal changes were not statistically significant, vertically FMA angle increased by 1.79° ± 2.25° and overbite reduced by 2.38 ± 1.83 mm. The maxillary first molars were distalized by an average of 4.70 ± 3.01 mm (Upper 6 [U6] to pterygoid vertical [PTV]). The maxillary central incisor labial tipping increased to an average of 1.61 ± 2.73 mm and cant of upper lip increased by 3.40° ± 5.88° are statistically significant (P < 0.05). All three distalization techniques in growing children produced significant effects on anchor unit. There was an increase in FMA angle, significant bite opening, proclination of the maxillary incisors and increase in the cant of the upper lip.

Prevalence and distribution of dental anomalies: a comparison between maxillary and mandibular tooth agenesis.

PubMed

Al-Abdallah, Mariam; AlHadidi, Abeer; Hammad, Mohammad; Al-Ahmad, Hazem; Saleh, Raja'

2015-11-01

The aim of this study was to compare the pattern and prevalence of associated dental anomalies between maxillary and mandibular tooth agenesis (hypodontia). A sample of 3315 dental patients, aged 8.6 to 25.4 years, was surveyed for tooth agenesis (excluding third molars): 106 subjects were diagnosed with maxillary hypodontia (group 1) and 70 with mandibular hypodontia (group 2). Both groups were examined for the following dental anomalies: retained deciduous molars, infraocclusion of deciduous molars, impaction, microdontia of maxillary lateral incisors, supernumerary teeth, transposition, transmigration, and ectopic eruption of the permanent molars. For statistical testing, the chi-square test (P <0.05) was used to compare the occurrences of these anomalies among the groups. We found that 77.5% of the patients in the mandibular hypodontia group had at least 1 dental anomaly compared with 49.5% in the maxillary hypodontia group (P <0.0001). The only dental anomaly with a significantly increased prevalence in the maxillary hypodontia group compared with the mandibular hypodontia group was microdontia of the maxillary lateral incisors (groups 1, 46.7%; group 2, 12.9%; P <0.0001). On the other hand, the prevalences of retained deciduous molars (group 1, 9.4%; group 2, 60.0%), infraoccluded deciduous molars (group 1, 0.9%; group 2, 7.1%), and impacted teeth (group 1, 22.6%; group 2, 38.6%) were significantly higher in the mandibular hypodontia group. The prevalences of supernumerary teeth, transposition, transmigration, and ectopic eruption of permanent molars were low and not significantly different between the groups. Tooth agenesis isolated to the maxilla is frequently associated with microdontia of the maxillary lateral incisors, whereas tooth agenesis isolated to the mandible is frequently associated with retained deciduous molars, infraoccluded deciduous molars, and impacted teeth. The results of this study may provide additional evidence supporting the field-specific genetic control theory for dental development in both jaws. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Palatal Injection for the Removal of Maxillary Teeth: Current Practice Among Oral and Maxillofacial Surgeons.

PubMed

Badenoch-Jones, Emma K; David, Michael; Lincoln, Trent

2017-07-01

Conventional teaching regarding palatal injection for the removal of maxillary teeth dictates the administration of buccal and palatal injections. Recently, some investigators have questioned the necessity of the palatal injection, suggesting that contemporary local anesthetics might diffuse sufficiently across the buccopalatal cortical bone distance. It has been suggested that because the buccopalatal cortical bone distance increases anteriorly to posteriorly in the maxilla, the success of maxillary extractions with buccal injection only might be related to the anteroposterior position of the tooth. Evidence from clinical trials has only recently become available. Since 2006, 15 clinical trials that examined outcomes of maxillary tooth extractions performed with buccal injection of local anesthetic only have been published. However, there are limited data available on the clinical practice of surgeons. An online survey was sent to 276 full members of the Canadian Association of Oral and Maxillofacial Surgeons. Respondents were asked about their use of palatal injection for the removal of maxillary teeth under local anesthesia, including how often they administer a palatal injection for maxillary extractions in each region of the maxilla. Ninety-two responses were received (33%). Most practitioners deliver a palatal injection for every maxillary tooth extraction under local anesthesia. However, there is a substantial number who do not always administer a palatal injection (ie, they give it "most of the time," "occasionally," or "never"). This number decreased in a linear fashion anteriorly to posteriorly in the maxilla (incisors, 17 of 89; canines, 16 of 88; premolars, 13 of 88; first and second molars, 10 of 89; third molars, 10 of 88). Some surgeons who do not always administer a palatal injection for extraction of maxillary teeth under local anesthesia. The number is larger for anterior compared with posterior teeth. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Use of repeat anterior maxillary distraction to correct residual midface hypoplasia in cleft patients

PubMed Central

2017-01-01

Objectives The study was designed to evaluate the efficacy of performing a second, repeat anterior maxillary distraction (AMD) to treat residual cleft maxillary hypoplasia. Materials and Methods Five patients between the ages of 12 to 15 years with a history of AMD and with residual cleft maxillary hypoplasia were included in the study. Inclusion was irrespective of gender, type of cleft lip and palate, and the amount of advancement needed. Repeat AMD was executed in these patients 4 to 5 years after the primary AMD procedure to correct the cleft maxillary hypoplasia that had developed since the initial procedure. Orthopantomogram (OPG) and lateral cephalograms were taken for evaluation preoperatively, immediately after distraction, after consolidation, and one year postoperatively. The data obtained was tabulated and a Mann Whitney U-test was used for statistical comparisons. Results At the time of presentation, a residual maxillary hypoplasia was observed with a well maintained distraction gap on the OPG which ruled out the occurrence of a relapse. Favorable movement of the segments without any resistance was seen in all patients. Mean maxillary advancement of 10.56 mm was achieved at repeat AMD. Statistically significant increases in midfacial length, SNA angle, and nasion perpendicular to point A distance was achieved (P=0.012, P=0.011, and P=0.012, respectively). Good profile was achieved for all patients. Minimal transient complications, for example anterior open bite and bleeding episodes, were managed. Conclusion Addressing the problem of cleft maxillary hypoplasia at an early age (12–15 years) is beneficial for the child. Residual hypoplasia may develop in some patients, which may require additional corrective procedures. The results of our study show that AMD can be repeated when residual deformity develops with the previous procedure having no negative impact on the results of the repeat procedure. PMID:29333371

Gastrogastric Fistula: an Unusual Cause for Severe Bile Reflux Following Conversion of Sleeve Gastrectomy to One Anastomosis Gastric Bypass.

PubMed

Haddad, Ashraf; Bashir, Ahmad; Nimeri, Abdelrahman

2018-05-04

One anastomosis gastric bypass/mini-gastric bypass (OAGB/MGB) was first described in 2001 as a safe and effective procedure. It has been gaining popularity worldwide. Multiple authors have reported the need to re-operate on patients for bile reflux. We report a patient with severe bile reflux after laparoscopic conversion of sleeve gastrectomy (LSG) to OAGB/MGB. A 33-year-old patient underwent a LSG in 2014. Postoperatively, she developed severe gastroesophageal acid reflux. In 2016, she underwent conversion of LSG to OAGB/MGB at the original institution for the treatment of her reflux symptoms. In 2017, she presented to us with epigastric pain, worsening reflux symptoms, steatorrhea, hypoproteinemia (6 g/dl), and body mass index of 25 kg/m 2 . Preoperative endoscopy revealed bile reflux, suture bezoar, and ulceration at the anastomosis. Laparoscopic exploration started by identifying the anatomy and measuring the lengths of the biliopancreatic limb (350 cm) and the common channel (450 cm). Upon dissecting the pouch, a gastrogastric fistula extending from the antrum to the pouch was encountered. This was confirmed with intraoperative endoscopy with bile refluxing to the pouch. The fistula, antrum, and part of the pouch were resected. The patient was converted to Roux-en-Y gastric bypass. She had an uneventful postoperative recovery. At 3 months of follow-up, her weight was stable and her steatorrhea resolved. Patients with bile reflux after OAGB/MGB need a high index of suspicion to detect unusual causes. Gastrogastric fistula is an unusual etiology of bile reflux that was never reported in the literature previously.

Dental Items of Interest: The Case of Delphic Sibyl by Michelangelo: Solitary Median Maxillary Central Incisor or Mesiodens.

PubMed

Perciaccante, Antonio; Coralli, Alessia

2015-01-01

A case of an anomaly in the maxillary dental arch on "Delphic Sibyl," a fresco by Michelangelo is reported. An accurate analysis of this fresco shows a single incisor tooth is present precisely in the midline. We hypothesize that it may be a case of solitary median maxillary central incisor (SMMCI) and discuss the differential diagnosis with another similar anomaly--the mesiodens.

Supernumerary Teeth in the Maxillary Anterior Region: The Dilemma of Early Versus Late Surgical Intervention.

PubMed

Sarne, Ofer; Shapira, Yehoshua; Blumer, Sigalit; Finkelstein, Tamar; Schonberger, Shirley; Bechor, Naomi; Shpack, Nir

Supernumerary teeth are the most common developmental dental anomalies in the maxillary anterior region causing interference to the developing permanent incisors resulting in poor dental and facial esthetics. Two different opinions regarding the timing for surgical removal of the supernumerary teeth are presented. In this case report, three brothers with supernumerary teeth in the maxillary anterior region are presented, their surgical and orthodontic management and outcome are discussed.

A subperiosteal maxillary implant causing severe osteolysis.

PubMed

Maï, Nguyen Tan; Jean-Baptiste, Caruhel; Hossein, Khonsari Roman

2018-06-22

Subperiosteal implant denture therapy was initially introduced in 1942 in Sweden and was then used worldwide for the treatment of fully edentulous maxillary or mandibular arches with advanced bone atrophy. Most authors describe decent success rates for mandibular subperiosteal implants in cases with major bone atrophy but follow-up studies for maxillary subperiosteal implants are not available. Here, we report a case of severe maxillary osteolysis secondary to the placement of a subperiosteal in-house implant. Subperiosteal implants are rarely used today but patients still carrying these devices with severe complications can be challenging to manage. New technical advances, including the use of surgical planification and additive manufacturing, may lead to a new interest in subperiosteal implants. Copyright © 2018. Published by Elsevier Masson SAS.

Piezoelectric surgery in maxillary sinus floor elevation with hydraulic pressure for xenograft and simultaneous implant placement.

PubMed

Li, Juanjuan; Lee, Kyungmo; Chen, Haohua; Ou, Guomin

2013-11-01

Because of the low bone quality in the posterior maxilla, edentulism in this area often results in a resorbed osseous structure and a pneumatized maxillary sinus, which makes dental implant surgery in the posterior maxilla a challenge. Two main surgical approaches are available for the sinus lift procedure: lateral and crestal. Improvement of the maxillary sinus floor elevation technique and increase in predictability are desirable. This article describes an innovative approach to maxillary sinus floor elevation with piezoelectric surgery and hydraulic pressure for xenograft and simultaneous implant placement in situations with insufficient residual alveolar bone. Copyright © 2013 Editorial Council for the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Combined orthodontic-restorative management of maxillary central incisors lost following traumatic injury: a case report.

PubMed

Fleming, Padhraig S; Seehra, Jadbinder; Dibiase, Andrew T

2011-01-01

A history of traumatic dental injury to the maxillary central incisors during preadolescence or adolescence is common and may result in premature loss. Treatment options include prosthetic implant replacement, autotransplantation, and orthodontic space closure with direct composite recontouring. This case report describes the treatment of an adolescent girl who presented with a crowded Class I malocclusion complicated by a history of trauma to the maxillary central incisors. The treatment plan consisted of orthodontic space closure following loss of both maxillary central incisors and mandibular premolars. This case highlights that orthodontic space closure can be a valuable treatment option in selected Class I crowded and Class II uncrowded malocclusions, producing predictable and efficient results.

Multidisciplinary approach in the management of a complicated crown root fracture.

PubMed

Shin, J H; Kim, J E; Kim, R J

2013-06-01

This article describes the management of a complicated crown root fracture. A young patient presented with a crown root fracture of the maxillary left central incisor with an oblique subgingival fracture line. A multidisciplinary treatment approach including endodontic treatment, orthodontic extrusion, surgical extraction and intra-alveolar repositioning was used to gain sufficient crown length of the fractured maxillary incisor. The coronally repositioned maxillary left central incisor was stabilised by sutures and a resin wire splint. A resin core was built up followed by fabrication of an all-ceramic crown. Clinical and radiographic follow-up of the maxillary left central incisor after 24 months showed no signs of bone resorption or pathology and good aesthetics and functions were maintained.

The Use of Recombinant Human Platelet-Derived Growth Factor for Maxillary Sinus Augmentation.

PubMed

Kubota, Atsushi; Sarmiento, Hector; Alqahtani, Mohammed Saad; Llobell, Arturo; Fiorellini, Joseph P

The maxillary sinus augmentation procedure has become a predictable treatment to regenerate bone for implant placement. The purpose of this study was to evaluate the effect of recombinant human platelet-derived growth factor BB (rhPDGF-BB) combined with a deproteinized cancellous bovine bone graft for sinus augmentation. The lateral window approach was used for maxillary sinuses with minimal residual bone. After a healing period of 4 months, dental implants were placed and then restored following a 2-month osseointegration period. The result demonstrated increased bone height and ISQ values and a 100% survival rate. This study indicates that the addition of rhPDGF-BB to deproteinized cancellous bovine bone accelerated the healing period in maxillary sinuses with minimal native bone.

Maxillary implant-retained partial overdenture with Dolder bar attachment: a clinical report.

PubMed

Kim, Hyeongil; Buhite, Robert J; Monaco, Edward A

2015-03-01

This article describes a technique for maintaining a maxillary Kennedy III partial removable dental prosthesis design in a patient who had non-restorable failing abutments by replacing the abutments with dental implants. Two implants were placed immediately after extraction of the abutment teeth in the anterior maxilla. After the implants were fully integrated, a Dolder bar attachment was fitted onto the implants. A new maxillary partial removable dental prosthesis was fabricated using the implants and the remaining natural teeth as abutments to restore function and esthetics. With the aid of dental implants, this Kennedy III maxillary removable dental prosthesis design could provide additional retention and support by promoting cross-arch stability and tissue, implant and tooth support. The patient's satisfaction was significantly increased.

Bacterial sinusitis and its frightening complications: subdural empyema and Lemierre syndrome.

PubMed

Benevides, Gabriel Núncio; Salgado, German Alcoba; Ferreira, Cristiane Rúbia; Felipe-Silva, Aloísio; Gilio, Alfredo Elias

2015-01-01

The symptoms of a previously healthy 14-year-old female with an initial history of tooth pain and swelling of the left maxillary evolved to a progressive headache and altered neurological findings characterized by auditory hallucinations, sleep disturbances, and aggressiveness. She was brought to the emergency department after 21 days of the initial symptoms. An initial computed tomography (CT) scan showed frontal subdural empyema with bone erosion. The symptoms continued to evolve to brain herniation 24 hours after admission. A second CT scan showed a left internal jugular vein thrombosis. The outcome was unfavorable and the patient died on the second day after admission. The autopsy findings depicted rarefaction of the cranial bone at the left side of the frontal sinus, and overt meningitis. The severe infection was further complicated by thrombophlebitis of the left internal jugular vein up to the superior vena cava with septic embolization to the lungs, pneumonia, and sepsis. This case report highlights the degree of severity that a trivial infection can reach. The unusual presentation of the sinusitis may have wrongly guided the approach of this unfortunate case.

A Combined Periodontal – Prosthetic Treatment Approach to Manage Unusual Gingival Visibility in Resting Lip Position and Inversely Inclined Upper Anterior Teeth: A Case Report with Discussion

PubMed Central

Biniraj, K R; Janardhanan, Mahija; Sunil, M M; Sagir, Mohammed; Hariprasad, A; Paul, Tony P; Emmatty, Rishi

2015-01-01

Excessive gingival visibility during smile is a common esthetic complaint in dentistry, but excessive gingival visibility in resting lip position is relatively uncommon condition. Several exclusive radical to conservative surgical treatment or its combination with orthodontic therapy to treat this condition are within the reach of every patient nowadays. A case report of an excessive gingival visibility because of altered passive eruption along with inversely inclined maxillary anterior teeth is presented here. A relatively simple treatment approach combining periodontal and restorative therapy is used here to achieve the desirable aesthetic results. The gingival exposure resulting from altered passive eruption was completely managed by a gingivectomy, but the inclined appearance of teeth was still an aesthetic complaint. After complete healing of gingivectomy surgery, appropriately designed crowns were given to rectify the inversely inclined appearance. A complete rehabilitation of patient’s smile could be achieved, the case was followed up for 3 years and the condition was found satisfactory. PMID:25878482

Feasibility of Shape-Memory Ni/Ti Alloy Wire Containing Tube Elevators for Transcrestal Detaching Maxillary Sinus Mucosa: Ex Vivo Study.

PubMed

Li, Yanfeng; Wang, Fuli; Hu, Pin; Fan, Jiadong; Han, Yishi; Liu, Bin; Liu, Tao; Yang, Chunhao; Gu, Xiangmin

2016-01-01

Osteotome sinus floor elevation is a less invasive approach to augment an insufficient alveolar bone at the posterior maxilla for dental implantation. However, this approach has some limitations due to the lack of sinus lift tools available for clinical use and the small transcrestal access to the maxillary sinus floor. We recently invented shape-memory Ni/Ti alloy wire containing tube elevators for transcrestal detaching maxillary sinus mucosa, and developed goat ex vivo models for direct visualizing the effectiveness of detaching sinus mucosa in real time during transcrestal maxillary sinus floor elevation. We evaluated our invented elevators, namely elevator 012 and elevator 014, for their effectiveness for transcrestal detaching maxillary sinus mucosa using the goat ex vivo models. We measured the length of sinus mucosa detached in mesial and distal directions or buccal and palatal directions, and the space volume created by detaching maxillary sinus mucosa in mesial, distal, buccal and palatal directions using the invented elevators. Elevator 012 had a shape-memory Ni/Ti alloy wire with a diameter of 0.012 inch, while elevator 014 had its shape-memory Ni/Ti alloy wire with a diameter of 0.014 inch. Elevator 012 could detach the goat maxillary sinus mucosa in the mesial or distal direction for 12.1±4.3 mm, while in the buccal or palatal direction for 12.5±6.7 mm. The elevator 014 could detach the goat maxillary sinus mucosa for 23.0±4.9 mm in the mesial or distal direction, and for 19.0±8.1 mm in the buccal or palatal direction. An average space volume of 1.7936±0.2079 ml was created after detaching the goat maxillay sinus mucosa in both mesial/distal direction and buccal/palatal direction using elevator 012; while the average space volume created using elevator 014 was 1.8764±0.2366 ml. Both two newly invented tube elevators could effectively detach the maxillary sinus mucosa on the goat ex vivo sinus models. Moreover, elevator 014 has advantages over the elevator 012 for the capability to detach sinus mucosa. © 2016 The Author(s) Published by S. Karger AG, Basel.

New lucinid bivalves from shallow and deeper water of the Indian and West Pacific Oceans (Mollusca, Bivalvia, Lucinidae)

PubMed Central

Taylor, John D.; Glover, Emily A.

2013-01-01

Abstract Four new species and a new genus of lucinid bivalves are described from shallow and deeper waters in the Indian and West Pacific Oceans. The new genus Scabrilucina (subfamily Lucininae) includes the little-known Scabrilucina victorialis (Melvill, 1899) from the Arabian Sea and Scabrilucina vitrea (Deshayes, 1844) from the Andaman Sea as well as a new species Scabrilucina melvilli from the Torres Strait off northeastern Australia. Ferrocina brunei new species (Lucininae) was recovered from 60 m near oil drilling activities off Borneo; its anatomy confirmed the presence of symbiotic bacteria. Two unusual deeper water species of Leucosphaerinae are described, both species included in on-going molecular analyses; Gonimyrtea ferruginea from 400–650 m in the southwest Pacific and Myrtina reflexa from 200–825 m off Zanzibar and Madagascar. PMID:24039537

Prenatal exposure to methyldopa leading to hypertensive crisis and cardiac failure in a neonate.

PubMed

Su, Jennifer A; Tang, William; Rivero, Niurka; Bar-Cohen, Yaniv

2014-05-01

A 2-week-old infant with normal intracardiac anatomy presented to the emergency department in a hypertensive crisis with acute cardiac failure. Despite extensive evaluation, no underlying disease was found. The patient's hypertension and cardiac dysfunction resolved after 1 week of supportive care in the PICU, and she was discharged within 2 weeks of presentation. The patient's history revealed transplacental exposure to the α-adrenergic agonist methyldopa for 10 weeks before delivery. Her age at presentation and the self-limited nature of cardiac sequelae with complete resolution of cardiac dysfunction suggest withdrawal effects from this exposure. Whereas the rebound hypertensive effects of α-adrenergic agonists are well established in the adult population, this report shows an unusual adverse outcome of in utero exposure to methyldopa. Copyright © 2014 by the American Academy of Pediatrics.

Management of the orbital floor in silent sinus syndrome.

PubMed

Thomas, Robert D; Graham, Scott M; Carter, Keith D; Nerad, Jeffrey A

2003-01-01

Enophthalmos in a patient with an opacified hypoplastic maxillary sinus, without sinus symptomatology, describes the silent sinus syndrome. A current trend is to perform endoscopic maxillary antrostomy and orbital floor reconstruction as a single-staged operation. A two-staged approach is performed at our institution to avoid placement of an orbital floor implant in the midst of potential infection and allow for the possibility that enophthalmos and global ptosis may resolve with endoscopic antrostomy alone, obviating the need for orbital floor reconstruction. A retrospective review identified four patients with silent sinus syndrome evaluated between June 1999 and August 2001. Patients presented to our ophthalmology department with ocular asymmetry, and computerized tomography (CT) scanning confirmed the diagnosis in each case. There were three men and one woman, with ages ranging from 27 to 40 years. All patients underwent endoscopic maxillary antrostomy. Preoperative enophthalmos determined by Hertel's measurements ranged from 3 to 4 mm. After endoscopic maxillary antrostomy, the range of reduction in enophthalmos was 1-2 mm. Case 2 had a preoperative CT scan and a CT scan 9 months after left endoscopic maxillary antrostomy. Volumetric analysis of the left maxillary sinus revealed a preoperative volume of 16.85 +/- 0.06 cm3 and a postoperative volume of 19.56 +/- 0.07 cm3. This represented a 16% increase in maxillary sinus volume postoperatively. Orbital floor augmentation was avoided in two patients because of satisfactory improvement in enophthalmos. In the other two patients, orbital reconstruction was performed as a second-stage procedure. There were no complications. Orbital floor augmentation can be offered as a second-stage procedure for patients with silent sinus syndrome. Some patients' enophthalmos may improve with endoscopic antrostomy alone.

Thin-plate spline analysis of the short- and long-term effects of rapid maxillary expansion.

PubMed

Franchi, Lorenzo; Baccetti, Tiziano; Cameron, Christopher G; Kutcipal, Elizabeth A; McNamara, James A

2002-04-01

The aim of this study was to investigate the short- and long-term effects induced by rapid maxillary expansion (RME) on the shape of the maxillary and circummaxillary structures by means of thin-plate spline (TPS) analysis. The sample consisted of 42 patients who were compared with a control sample of 20 subjects. The treated subjects underwent Haas-type RME, followed by fixed appliance therapy. Postero-anterior (PA) cephalograms were analysed for each treated subject at T1 (pre-treatment), T2 (immediate post-expansion), and T3 (long-term observation), and were available at T1 and T3 for the control group (CG). The mean age at T1 was 11 years and 10 months for both groups. The mean chronological ages at T3 were 20 years, 6 months for the treated group (TG) and 17 years, 8 months for the control group. The study focused on shape changes in the maxillary, nasal, zygomatic, and orbital regions. TPS analysis revealed significant shape changes in the TG. They consisted of an upward and lateral displacement of the two halves of the naso-maxillary complex as a result of active expansion in the short-term, and normalization of maxillary shape in the transverse dimension in the long-term (the initial transverse deficiency of the maxilla in the treated group was eliminated by RME therapy both in the short- and long-term). At the end of the observation period, the nasal cavities were larger when compared with both their pre-expansion configuration and the final configuration in the controls. RME with the Haas appliance appears to be an efficient therapeutic means to induce permanent favourable changes in the shape of the naso-maxillary complex.

Biomechanical comparison of two intraoperative mobilization techniques for maxillary distraction osteogenesis: Down-fracture versus non-down-fracture.

PubMed

Yang, Lili; Suzuki, Eduardo Yugo; Suzuki, Boonsiva

2014-01-01

The purpose of this study was to compare the distraction forces and the biomechanical effects between two different intraoperative surgical procedures (down-fracture [DF] and non-DF [NDF]) for maxillary distraction osteogenesis. Eight patients were assigned into two groups according to the surgical procedure: DF, n = 6 versus NDF, n = 2. Lateral cephalograms taken preoperatively (T1), immediately after removal of the distraction device (T2), and after at least a 6 months follow-up period (T3) were analyzed. Assessment of distraction forces was performed during the distraction period. The Mann-Whitney U-test was used to compare the difference in the amount of advancement, the maximum distraction force and the amount of relapse. Although a significantly greater amount of maxillary movement was observed in the DF group (median 9.5 mm; minimum-maximum 7.9-14.1 mm) than in the NDF group (median 5.9 mm; minimum-maximum 4.4-7.6 mm), significantly lower maximum distraction forces were observed in the DF (median 16.4 N; minimum-maximum 15.1-24.6 N) than in the NDF (median 32.9 N; minimum-maximum 27.6-38.2 N) group. A significantly greater amount of dental anchorage loss was observed in the NDF group. Moreover, the amount of relapse observed in the NDF group was approximately 3.5 times greater than in the DF group. In this study, it seemed that, the use of the NDF procedure resulted in lower levels of maxillary mobility at the time of the maxillary distraction, consequently requiring greater amounts of force to advance the maxillary bone. Moreover, it also resulted in a reduced amount of maxillary movement, a greater amount of dental anchorage loss and poor treatment stability.

The microbiology of ethmoid and maxillary sinuses in patients with chronic sinusitis.

PubMed

Aral, Murat; Keles, Erol; Kaygusuz, Irfan

2003-01-01

To investigate aerob-anaerob microorganisms growth in maxillary and ethmoid sinuses by evaluating aspiration materials from patients with chronic sinusitis. The study was performed prospectively, and there were 31 patients (23 men, 8 women; mean age, 31.4+/-14.15, between 18-65 years) who had endoscopic sinus surgery because of chronic sinusitis. During the operation, when the maxillary sinus ostium and ethmoid sinus were opened, readily aspirated materials from sinuses were evaluated regarding aerob and anaerob bacteria. Nose and throat swap samples were collected preoperatively to determine the upper respiratory tract flora and also to understand the relationship between the flora and the microorganisms aspirated from sinuses. Total aerob bacteria count, which was isolated from preoperative nasal swab cultures, was 36, and aerob-anaerob bacteria count that included cultures taken from maxillary and ethmoid sinuses during the functional endoscopic sinus surgery was 42. For each 2 samples, the most common isolated aerob bacteria were coagulase (-) staphylococci. Microorganisms were isolated in 87.0% of 27 patients, in which cultures taken from maxillary and ethmoid sinuses during the functional endoscopic sinus surgery were included. It is determined that the isolated aerob bacteria rate was 90.4%, and the isolated anaerob bacteria rate was 14.2%. All of the 6 samples in which anaerob bacteria isolated were all maxillary sinus aspiration materials. Microorganisms that isolated from the nose and the sinuses were similar with the rate of 25.8%, and microorganisms that isolated from the throat cultures and sinuses were similar with the rate of 22.5%. This study reveals the aerob and anaerob microbiology of the maxillary and ethmoid sinuses so the treatment of chronic sinusitis will be easier.

Evaluation of root and alveolar bone development of unilateral osseous impacted immature maxillary central incisors after the closed-eruption technique.

PubMed

Shi, Xiangru; Xie, Xiaoyan; Quan, Junkang; Wang, Xiaozhe; Sun, Xiangyu; Zhang, Chenying; Zheng, Shuguo

2015-10-01

In this study, we evaluated root and alveolar bone development in unilateral osseous impacted immature maxillary central incisors by cone-beam computed tomography before and after closed-eruption treatment, in comparison with naturally erupted contralateral immature maxillary central incisors. The study included 30 patients, 20 boys and 10 girls, with a mean age of 8.44 ± 1.20 years (range, 6.5-11.2 years). After treatment, the root lengths of both the impacted maxillary central incisors (10.66 ± 2.10 mm) and the contralateral maxillary central incisors (11.04 ± 1.76 mm) were significantly greater than their pretreatment values (6.67 ± 1.94 and 9.02 ± 2.13 mm, respectively). The root canal widths of the incisors decreased significantly after treatment. From the posttreatment cone-beam computed tomography images, the ratio of exposed root length to total root length and the thickness of the alveolar bone at 1 mm under the alveolar crest and at the apex were calculated to evaluate alveolar bone development. Impacted immature maxillary central incisors differed significantly from contralateral immature maxillary central incisors in labial exposed root length, labial ratio to total root length, and lingual alveolar crest. Clinical crown height was higher (statistically but not clinically) for the impacted incisors (9.87 mm) than for the contralateral incisors (9.37 mm). Impacted immature incisors grew to the same stage as did erupted contralateral incisors after closed-eruption treatment. Both incisor types had some alveolar bone loss, and thin alveolar bone surrounded the roots. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Maxillary Sinusitis Caused by Actinomucor elegans

PubMed Central

Davel, Graciela; Featherston, Patricia; Fernández, Anibal; Abrantes, Ruben; Canteros, Cristina; Rodero, Laura; Sztern, Carlos; Perrotta, Diego

2001-01-01

We report the first case of maxillary sinusitis caused by Actinomucor elegans in an 11-year-old patient. Histopathological and mycological examinations of surgical maxillary sinuses samples showed coenocytic hyphae characteristic of mucoraceous fungi. The fungi recovered had stolons and rhizoids, nonapophyseal and globose sporangia, and whorled branched sporangiophores and was identified as A. elegans. After surgical cleaning and chemotherapy with amphotericin B administered intravenously and by irrigation, the patient became asymptomatic and the mycological study results were negative. PMID:11158140

[Maxillary advancement osteotomy with sequelae cleft lip and palate: Dilemma between occlusion and aesthetic profile].

PubMed

Vigneron, A; Morand, B; Lafontaine, V; Lesne, V; Lesne, C; Bettega, G

2015-11-01

Maxillary hypoplasia is a common sequela of cleft lip and palate. Its surgical treatment consists in a maxillary advancement by distraction or by conventional orthognathic surgery but morphological results are unpredictable. Our goal in this study was to see if the esthetical results (on the lip and the nose) of maxillary advancement were correlated to the preservation of lateral incisor space of the cleft side. This retrospective study included 38 patients operated between 2002 and 2013. Unilateral clefts were studied independently from bilateral clefts. Profile aesthetics was evaluated independently and subjectively by two surgeons and scored on an 8-point scale. The result was classified as "good" if the score was superior or equal to 6. The score was correlated to the following parameters: amount of maxillary advancement, upper incisor axis, preservation of the missing lateral incisor space. In the "good result" group, the space of the lateral incisor was less often preserved. The nasolabial angle was more open and the upper central incisor axis more vertical. These results were more pronounced in bilateral clefts, but also found in unilateral clefts. Under reservation of the subjective evaluation and of the small number of patients, it seemed that lateral incisor space closure improved the profile of patients treated by maxillary advancement for cleft lip and palate sequelae. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Periodontal considerations in the use of bonds or bands on molars in adolescents and adults.

PubMed

Boyd, R L; Baumrind, S

1992-01-01

This longitudinal study compared the periodontal status of bonded and banded molars in 20 adult and 40 adolescent patients before, during and after treatment with fixed orthodontic appliances. Plaque accumulation (measured by the Plaque Index), gingival inflammation (measured by the Gingival Index and the bleeding tendency), and pocket depth were assessed by one examiner at sites along the mesio-buccal line angle of the maxillary right first molar and the mandibular left first molar. Assessments were made immediately prior to the placement of fixed appliances (pretreatment), at 1, 3, 6, 9, 12 and 18 months after appliances were placed; and 3 months after appliances were removed (posttreatment). Loss of attachment between the pretreatment and posttreatment visits also was determined. At pretreatment, no significant differences were found in gingival inflammation between maxillary and mandibular banded and bonded molars. During treatment, both maxillary and mandibular banded molars showed significantly (p less than 0.05) greater gingival inflammation and plaque accumulation than did bonded molars. Three months after appliance removal, the maxillary molars that had been banded continued to show significantly more gingival inflammation and loss of attachment than did the maxillary molars that had been bonded. When all banded and bonded teeth were grouped by patient age, mean values for plaque accumulation and gingival inflammation in the maxillary molar regions were significantly greater for adolescents than for adults.

The influence of varying maxillary lateral incisor dimensions on perceived smile aesthetics.

PubMed

Bukhary, S M N; Gill, D S; Tredwin, C J; Moles, D R

2007-12-22

The aim of this study was to determine the influence of varying the dimensions of the maxillary lateral incisors on perceived smile aesthetics. Clinical study. Postgraduate dental teaching hospital. A photograph of a female smile displaying only the lips and teeth was digitally altered. First, the width of the maxillary lateral incisors, in proportion to the central incisor, was altered at 5% intervals to produce six images (52%, 57%, 62% [the 'golden proportion'], 67%, 72% and 77%). In a second group, the length of the lateral incisor was altered at 0.5 mm increments to produce five images with the lateral incisor 0.5 mm, 1 mm, 1.5 mm, 2 mm and 2.5 mm shorter than the adjacent central incisor. The photos were ranked from 'most attractive' to 'least attractive' by 41 hypodontia patients, 46 non-hypodontia 'control' patients and 30 dentists. The 67% followed by the 72% lateral-to-central width proportions were the 'most preferred' by all groups. A maxillary lateral incisor that is 1-1.5 mm shorter than the central incisor was the 'most popular' maxillary lateral incisor length. The very short and very long maxillary lateral incisor was consistently perceived as 'least attractive'. There is no evidence to suggest that the golden proportion should be considered the ideal aesthetic standard when creating space for the replacement of missing lateral incisors.

An Anatomical Study of Maxillary-Zygomatic Complex Using Three-Dimensional Computerized Tomography-Based Zygomatic Implantation

PubMed Central

Zhao, Shijie; Liu, Hui; Sun, Zhipeng; Wang, Jianwei

2017-01-01

Objective To obtain anatomical data of maxillary-zygomatic complex based on simulating the zygomatic implantation using cadaver heads and three-dimensional computerized tomography (3D-CT). Methods Simulating zygomatic implantation was performed using seven cadaver heads and 3D-CT images from forty-eight adults. After measuring the maxillary-zygomatic complex, we analyzed the position between the implantation path and the maxillary sinus cavity as well as the distance between the implantation path and the zygomatic nerve. Results The distance from the starting point to the endpoint of the implant was 56.85 ± 5.35 mm in cadaver heads and 58.15 ± 7.37 mm in 3D-CT images. For the most common implantation path (80.20%), the implant went through the maxillary sinus cavity completely. The projecting points of the implant axis (IA) on the surface of zygoma were mainly located in the region of frontal process of zygomatic bone close to the lateral orbital wall. The distances between IA and zygomatic nerve in 53 sides were shorter than 2 mm. Conclusion The simulating zygomatic implantation on cadaver skulls and 3D-CT imaging provided useful anatomical data of the maxillary-zygomatic complex. It is necessary to take care to avoid the zygomatic nerve injury during implantation, because it frequently appears on the route of implantation. PMID:29376077

Role of Modified Endoscopic Medial Maxillectomy in Persistent Chronic Maxillary Sinusitis

PubMed Central

Thulasidas, Ponnaiah; Vaidyanathan, Venkatraman

2014-01-01

Introduction Functional endoscopic sinus surgery has a long-term high rate of success for symptomatic improvement in patients with medically refractory chronic rhinosinusitis. As the popularity of the technique continues to grow, however, so does the population of patients with postsurgical persistent sinus disease, especially in those with a large window for ventilation and drainage. In addition, chronic infections of the sinuses especially fungal sinusitis have a higher incidence of recurrence even though a wide maxillary ostium had been performed earlier. This subset of patients often represents a challenge to the otorhinolaryngologist. Objectives To identify the patients with chronic recalcitrant maxillary sinusitis and devise treatment protocols for this subset of patients. Methods A retrospective review was done of all patients with persistent maxillary sinus disease who had undergone modified endoscopic medial maxillectomy between 2009 and 2012. We studied patient demographics, previous surgical history, and follow-up details and categorized the types of endoscopic medial maxillectomies performed in different disease situations. Results We performed modified endoscopic medial maxillectomies in 37 maxillary sinuses of 24 patients. The average age was 43.83 years. Average follow-up was 14.58 months. All patients had good disease control in postoperative visits with no clinical evidence of recurrences. Conclusion Modified endoscopic medial maxillectomy appears to be an effective surgery for treatment of chronic, recalcitrant maxillary sinusitis. PMID:25992084

A clinical study to evaluate the correlation between maxillary central incisor tooth form and face form in an Indian population.

PubMed

Koralakunte, Pavankumar R; Budihal, Dhanyakumar H

2012-09-01

A study was performed to examine the correlation between maxillary central incisor tooth form and face form in males and females in an Indian population. The selection of prosthetic teeth for edentulous patients is a primary issue in denture esthetics, especially in the case of maxillary central incisors, which are the most prominent teeth in the arch. Two hundred dental students of Indian origin comprising 79 males and 121 females aged 18-28 years studying at Bapuji Dental College and Hospital were randomly selected as the study subjects. A standardized photographic procedure was used to obtain images of the face and the maxillary central incisors. The outline forms of the face and the maxillary right central incisor tooth were determined using a standardized method. The outline forms obtained were used to classify both face form and tooth form on the basis of visual and William's methods. The means were considered after evaluation by five prosthodontists, and the results were tabulated. Statistical analysis was performed using the chi-squared test for association and Z-test for equality of proportions. A correlation greater than 50% was observed between tooth form and face form by the visual method, compared with one of 31.5% by William's method. There was no highly defined correlation between maxillary central incisor tooth form and face form among the male and female Indian subjects studied.

Unilateral maxillary molar distalization with zygoma-gear appliance.

PubMed

Kilkis, Dogan; Bayram, Mehmet; Celikoglu, Mevlut; Nur, Metin

2012-08-01

The aim of this study was to present the orthodontic treatment of a 15-year-old boy with a unilateral maxillary molar distalization system, called the zygoma-gear appliance. It consisted of a zygomatic anchorage miniplate, an inner bow, and a Sentalloy closed coil spring (GAC International, Bohemia, NY). A distalizing force of 350 g was used during the distalization period. The unilateral Class II malocclusion was corrected in 5 months with the zygoma-gear appliance. The maxillary left first molar showed distalization of 4 mm with an inclination of 3°. The maxillary premolars moved distally with the help of the transseptal fibers. In addition, there were slight decreases in overjet (-0.5 mm) and maxillary incisor inclination (-1°), indicating no anchorage loss from the zygoma-gear appliance. Preadjusted fixed appliances (0.022 × 0.028-in, MBT system; 3M Unitek, Monrovia, Calif) were placed in both arches to achieve leveling and alignment. After 14 months of unilateral distalization with the zygoma-gear appliance and fixed appliances, Class I molar and canine relationships were established with satisfactory interdigitation of the posterior teeth. Acceptable overjet and overbite were also achieved. This article shows that this new system, the zygoma-gear appliance, can be used for unilateral maxillary molar distalization without anchorage loss. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Anterior maxillary segmental distraction in the treatment of severe maxillary hypoplasia secondary to cleft lip and palate.

PubMed

Li, Hongliang; Dai, Jiewen; Si, Jiawen; Zhang, Jianfei; Wang, Minjiao; Shen, Steve Guofang; Yu, Hongbo

2015-01-01

Anterior maxillary segmental distraction (AMSD) is an effective surgical procedure in the treatment of maxillary hypoplasia secondary to cleft lip and palate. Its unique advantage of preserving velopharyngeal function makes this procedure widely applied. In this study, the application of AMSD was described and its long-term stability was explored. Eight patients with severe maxillary hypoplasia secondary to CLP were included in this study. They were treated with AMSD using rigid external distraction (RED) device. Cephalometric analysis was performed twice at three time points for evaluation: before surgery (T1), after distraction (T2), and 2 years after treatment (T3). One-way analysis of variance was used to assess the differences statistically. All the distractions completed smoothly, and maxilla was distracted efficiently. The value of SNA, NA-FH, Ptm-A, U1-PP, overjet and PP (ANS-PNS) increased significantly after the AMSD procedure (P < 0.05), with the mean overjet increased by 14.28 mm. However, comparison of cephalometric analysis between T2 and T3 showed no significant difference (P > 0.05). Changes of palatopharyngeal depth and soft palatal length were insignificant. AMSD with RED device provided an effective way to correct maxillary hypoplasia secondary to CLP, extended the palatal and arch length, avoided damage on velopharyngeal closure function and reduced the relapse rate. It is a promising and valuable technique in this potentially complicated procedure.

Changes in nasorespiratory function in association with maxillary distraction osteogenesis in subjects with cleft lip and palate.

PubMed

Saito, Kiyo; Ono, Takashi; Mochida, Masumi; Ohyama, Kimie

2006-01-01

The current study aimed to determine how nasorespiratory function changes in association with maxillary distraction osteogenesis (DO). Furthermore, with regard to impaired nasorespiratory function, the possibility of a relationship between the cleft side and laterality and any effect of maxillary distraction osteogenesis was investigated. In this descriptive, prospective clinical report, subjective and objective data regarding nasorespiratory function before and after maxillary distraction osteogenesis were compared. Data from 13 subjects with cleft lip and palate were used. Subjects had a severe maxillary deficiency and underwent distraction osteogenesis using a rigid external device system. The subjective measure was the score on a questionnaire regarding nasorespiratory function using a visual analog scale. The objective measure was nasal resistance. The visual analog scale score for two items significantly decreased just after distraction osteogenesis. Nasal resistance also significantly decreased 1 year after distraction osteogenesis. Moreover, nasal resistance on the cleft side was significantly greater than that on the noncleft side just before and 1 year after distraction osteogenesis. There was a significant positive correlation between changes in the visual analog scale score and nasal resistance. These results suggest that nasorespiratory function changes in association with maxillary distraction osteogenesis in subjects with cleft lip and palate. Moreover, it appears that nasal obstruction on the cleft side does not change in subjects with unilateral cleft lip and palate.

Quantitative evaluation of maxillary bone deformation by computed tomography in patients with leprosy

PubMed Central

Kondo, Osamu; Suzuki, Koichi; Aoki, Yoshinori; Ishii, Norihisa

2018-01-01

Background Facial deformation as a sequela of leprosy is caused not only by a saddle nose but also by regression of the maxilla, as well documented in paleopathological observations of excavated skeletal remains of patients with leprosy. However, maxillary changes in living patients have been evaluated only by the subjective visual grading. Here, we attempted to evaluate maxillary bone deformation in patients with leprosy using three-dimensional computed tomography (3D-CT). Methods Three-dimensional images centered on the maxilla were reconstructed using multiplanar reconstruction methods in former patients with leprosy (n = 10) and control subjects (n = 5); the anterior-posterior length of the maxilla (MA-P) was then measured. The difference between the MA-P of the patients and those of controls was evaluated after compensating for individual skull size. These findings were also compared with those from previous paleopathological studies. Findings Three former patients with lepromatous leprosy showed marked atrophy of the maxilla at the prosthion (-8.6, -11.1 and -17.9 mm) which corresponded with the visual appearance of the maxillary deformity, and these results were consistent with paleopathological findings of excavated skeletal remains. Additionally, the precise bone defects of the maxilla could be individually calculated for accurate reconstructive surgery. Interpretation We have successfully illustrated maxillary bone deformities in living patients with leprosy. This study also confirmed the maxillary regression described in paleopathological studies. PMID:29522533

Speech intelligibility enhancement after maxillary denture treatment and its impact on quality of life.

PubMed

Knipfer, Christian; Riemann, Max; Bocklet, Tobias; Noeth, Elmar; Schuster, Maria; Sokol, Biljana; Eitner, Stephan; Nkenke, Emeka; Stelzle, Florian

2014-01-01

Tooth loss and its prosthetic rehabilitation significantly affect speech intelligibility. However, little is known about the influence of speech deficiencies on oral health-related quality of life (OHRQoL). The aim of this study was to investigate whether speech intelligibility enhancement through prosthetic rehabilitation significantly influences OHRQoL in patients wearing complete maxillary dentures. Speech intelligibility by means of an automatic speech recognition system (ASR) was prospectively evaluated and compared with subjectively assessed Oral Health Impact Profile (OHIP) scores. Speech was recorded in 28 edentulous patients 1 week prior to the fabrication of new complete maxillary dentures and 6 months thereafter. Speech intelligibility was computed based on the word accuracy (WA) by means of an ASR and compared with a matched control group. One week before and 6 months after rehabilitation, patients assessed themselves for OHRQoL. Speech intelligibility improved significantly after 6 months. Subjects reported a significantly higher OHRQoL after maxillary rehabilitation with complete dentures. No significant correlation was found between the OHIP sum score or its subscales to the WA. Speech intelligibility enhancement achieved through the fabrication of new complete maxillary dentures might not be in the forefront of the patients' perception of their quality of life. For the improvement of OHRQoL in patients wearing complete maxillary dentures, food intake and mastication as well as freedom from pain play a more prominent role.

Maxillary dental arch dimensions in 6-year-old children with articulatory speech disorders.

PubMed

Heliövaara, Arja

2011-01-01

To evaluate maxillary dental arch dimensions in 6-year-old children with articulatory speech disorders and to compare their dental arch dimensions with age- and sex-matched controls without speech disorders. Fifty-two children (15 girls) with errors in the articulation of the sounds /r/, /s/ or /l/ were compared retrospectively with age- and sex-matched controls from dental casts taken at a mean age of 6.4 years (range 5.0-8.4). All children with articulatory speech disorders had been referred to City of Helsinki Health Care, Dental Care Department by a phoniatrician or a speech therapist in order to get oral-motor activators (removable palatal plates) to be used in their speech therapy. A χ2-test and paired Student's t tests were used in the statistical analyses. The children with articulatory speech disorders had similar maxillary dental arch widths but smaller maxillary dental arch length than the controls. This small series suggests that 6-year-old children with articulatory speech disorders may have decreased maxillary dental arch length. Copyright © 2011 S. Karger AG, Basel.

Clinical and biological analysis in graftless maxillary sinus lift.

PubMed

Parra, Marcelo; Olate, Sergio; Cantín, Mario

2017-08-01

Maxillary sinus lift for dental implant installation is a well-known and versatile technique; new techniques are presented based on the physiology of intrasinus bone repair. The aim of this review was to determine the status of graftless maxillary sinus lift and analyze its foundations and results. A search was conducted of the literature between 1995 and 2015 in the Medline, ScienceDirect, and SciELO databases using the keywords "maxillary sinus lift," "blood clot," "graftless maxillary sinus augmentation," and "dental implant placement." Ten articles were selected for our analysis of this technique and its results. Despite the limited information, cases that were followed for at least six months and up to four years had a 90% success rate. Published techniques included a lateral window, elevation of the sinus membrane, drilling and dental implant installation, descent of the membrane with variations in the installation of the lateral wall access and suturing. The physiology behind this new bone formation response and the results of the present research were also discussed. We concluded that this is a promising and viable technique under certain inclusion criteria.

Root canal configurations of third molar teeth. A comparison with first and second molars in the Turkish population.

PubMed

Sert, Semih; Sahinkesen, Güneş; Topçu, Fulya T; Eroğlu, Seyda E; Oktay, Elif A

2011-12-01

The purpose of the current study was to determine the similarities of maxillary and mandibular third molars with the other molar teeth. A total of 2016 extracted maxillary and mandibular permanent teeth were evaluated. The teeth were divided into six groups. The teeth were stored in 5% nitric acid solution for 7 days, then placed in increasing concentrations of ethyl alcohol. The teeth were rendered transparent by immersion in xylene solution for 4 days until complete transparency was achieved. Three roots were present in 93.0% of the maxillary molars, and 91.3% of the second molars. Among the maxillary third molars, 35.5% were single-rooted and 24.9% of the mandibular third molars had single roots. Double roots were present in 69.2% of the mandibular third molars, and 5.4% had three roots. Four new root canal configurations were encountered in this study. The root canal configurations of the mandibular and maxillary teeth showed similarities with the results of other studies performed in different populations. © 2010 The Authors. Australian Endodontic Journal © 2010 Australian Society of Endodontology.

Distalization of Maxillary First Permanent Molar by Pendulum Appliance in Mixed Dentition Period.

PubMed

Paranna, Sujatha; Shetty, Prakashchandra; Anandakrishna, Latha; Rawat, Anuradha

2017-01-01

Mesial drifting of molar teeth in maxillary arch is corrected by movement of the molars distally. In addition to traditional distal movement techniques, such as extraoral force application and removable appliances, various intra-arch devices have been introduced since 1980s. These intra-arch appliances have nearly eliminated the need for patient cooperation. The purpose of this paper is to report a case of 10-year-old male patient with loss of space in maxillary molar teeth treated by intra-arch appliance-pendulum appliance by distalization of maxillary first permanent molar teeth. Distaliza-tion of the permanent molar teeth helped in proper eruption of second premolar teeth without any extensive treatment procedures. In the present case report, the treatment of developing malocclusion was corrected by utilizing the concept of interceptive orthodontics. Hence, correction of space loss in mixed dentition period using pendulum appliance can eliminate the fixed orthodontic therapy. Paranna S, Shetty P, Anandakrishna L, Rawat A. Distalization of Maxillary First Permanent Molar by Pendulum Appliance in Mixed Dentition Period. Int J Clin Pediatr Dent 2017;10(3):299-301.

Destructive Fibrosarcoma of the Maxillary Sinus.

PubMed

Ekinci, Adnan; Karataş, Duran; Yetiş, Abdurrahman; Erenler, Behice Hande; Ozcan, Muge

2018-05-01

Paranasal fibrosarcoma of nasal cavity and paranasal sinuses is a very rare malignant tumor. It is usually presented with nasal obstruction and epistaxis. In this clinical report, clinical symptoms, pathogenesis, and treatment principles of a paranasal fibrosarcoma originating from the right maxillary sinus and obstructing the right nasal passage are discussed.A 55-year-old male patient was admitted to the authors clinic with complaints of nasal obstruction and epistaxis lasting for 2 years. Anterior rhinoscopy revealed a mass lesion which obstructed the right nasal passage and caused frequent epistaxis. An opacity consistent with soft tissue lesion which was originated from the right maxillary sinus and filled the right nasal passage was observed in paranasal tomography. Magnetic resonance imaging revealed that the mass lesion was contrasted. Tumor was seen to erode orbital floor, and lateral and anterior walls of the maxillary sinus. Biopsy result was reported as papilloma. The patient was treated with Denker approach as anterior wall of the maxillary sinus was eroded by the tumor lesion and the mass lesion was excised. The patient received postoperative radiotherapy as pathological diagnosis was reported as paranasal fibrosarcoma.

Breakage of internal maxillary distractor: considerable complication of maxillary distraction osteogenesis.

PubMed

Aikawa, Tomonao; Iida, Seiji; Isomura, Emiko T; Namikawa, Mari; Matsuoka, Yudai; Yamada, Chiaki; Yamamoto, Taku; Takigawa, Yoko

2008-07-01

Maxillary distraction osteogenesis using intraoral distractors is now one of the standard treatments of maxillary retrusion. This report shows 2 cases of breakage of this internal maxillary distractor in patients with cleft lip and palate; one was observed during the distraction period and the other was during the retention period. The first case required a rotational movement of the distraction segment, and this movement caused the laterally dislocation of the posterior part of the distractor, where the distractor suffered some mechanical forces by mouth opening. In the latter case, breakage of distractor was observed on the radiographs taken 3 months after distraction and this complication may have been caused by mechanical force by occlusion and mastication. Both breakages were found at the joint of the anchorage plate and the extension rod, which has some flexibility for adjusting the plate to the bone surface. Therefore, surgeons should pay special attention for this mechanical weak area in this distractor not only during the advancement period, but also during the retention period and should avoid unnecessary frequent bending for adopting the bone surface, which directly weakens the joint.

Comparison of second molar eruption patterns in patients with skeletal Class II and skeletal Class I malocclusions.

PubMed

Brin, Ilana; Camasuvi, Semin; Dali, Nasser; Aizenbud, Dror

2006-12-01

The eruptive positions of the second molars in Class I and Class II malocclusions were studied. Pretreatment records of 221 patients with a mean age of 11.3 years were evaluated. About 19% of them had skeletal Class I, 31% had skeletal maxillary Class II, and 50% had skeletal mandibular Class II malocclusions. The mean values of the dental and chronologic ages of the subjects were similar. The eruptive positions in relation to a reference line, the developmental stages of the patients' second molars and dental ages were recorded from the panoramic roentgenograms. The distribution of the various developmental stages in each malocclusion group was similar, and no association between skeletal malocclusion and dental developmental stage of the second molars was encountered. The eruptive position of the maxillary second molars was more occlusal only in the oldest maxillary Class II group, above 12 years of age (P = .02). These results support, in part, previous reports suggesting that the maxillary second molars may erupt earlier in patients with skeletal maxillary Class II malocclusions.

Direct Resin Composite Restoration of Maxillary Central Incisors with Fractured Tooth Fragment Reattachment: Case Report.

PubMed

Szmidt, Monika; Górski, Maciej; Barczak, Katarzyna; Buczkowska-Radlińska, Jadwiga

This article presents a clinical protocol to reconstruct two accidentally damaged maxillary central incisors using composite resin material and a fractured tooth component. A patient was referred to the clinic with fracture of the two maxillary central incisors. Clinical examination revealed that both teeth were fractured in the middle third of the crown and that the fractures involved enamel and dentin with no pulp exposure. The patient had also suffered a lower lip laceration. When the lip was evaluated, a fractured fragment of the maxillary right central incisor was found inside the wound. The missing part of the tooth was replaced via adhesive attachment. Due to the damage of the fractured part of the maxillary left central incisor, direct composite restoration of this tooth was performed. With the advent of adhesive dentistry, the process of fragment reattachment has become simplified and more reliable. This procedure provides improved function, is faster to perform, and provides long-lasting effects, indicating that reattachment of a coronal fragment is a realistic alternative to placement of conventional resin composite restorations.

Three-dimensional assessment of maxillary changes associated with bone anchored maxillary protraction

PubMed Central

Nguyen, Tung; Cevidanes, Lucia; Cornelis, Marie A.; Heymann, Gavin; de Paula, Leonardo K.; De Clerck, Hugo

2013-01-01

Introduction Bone-anchored maxillary protraction has been shown to be an effective treatment modality for the correction of Class III malocclusions. The purpose of this study was to evaluate 3-dimensional changes in the maxilla, the surrounding hard and soft tissues, and the circummaxillary sutures after bone-anchored maxillary protraction treatment. Methods Twenty-five consecutive skeletal Class III patients between the ages of 9 and 13 years (mean, 11.10 ± 1.1 years) were treated with Class III intermaxillary elastics and bilateral miniplates (2 in the infrazygomatic crests of the maxilla and 2 in the anterior mandible). Cone-beam computed tomographs were taken before initial loading and 1 year out. Three-dimensional models were generated from the tomographs, registered on the anterior cranial base, superimposed, and analyzed by using color maps. Results The maxilla showed a mean forward displacement of 3.7 mm, and the zygomas and the maxillary incisors came forward 3.7 and 4.3 mm, respectively. Conclusions This treatment approach produced significant orthopedic changes in the maxilla and the zygomas in growing Class III patients. PMID:22133943

[Clinical use of beta-tricalcium phosphate ceramics with patient's own bone in maxillary elevation with osteotome].

PubMed

Chen, Lu; Zhou, Wen-qing; Wu, Yan-ping; Lu, Jing-hua

2011-06-01

To evaluate the clinical value of using the patient's autogenous bone mixed with beta-tricalcium phosphate ceramics(β-TCP) for maxillary sinus lift with simultaneous implantation. Patients with loss of posterior teeth and bone height of maxillary sinus floor between 4-10mm underwent internal sinus floor elevation, the proportion of bone to β-TCP was 1:1 and the mixture was inserted into the sinus floor. All cases had simultaneously placed ITI implants.The final crown fabrication was taken 4-6 months after implanting. Twenty-one implants were inserted in 16 cases, the mean increase height was 4.2mm(2-6mm). There was clinical complaint of maxillary sinus inflammation in 1 case within 2 weeks, but the symptoms disappeared after antibiotic therapy. The remaining of 20 implants had no obvious complications. All implants had loaded for 32 months and were stable and well osseointegration on X-ray film. Maxillary sinus elevation with simultaneous implantation is an easy procedure. Implants can be stable for a long time.

The Effects of Maxillary Protraction with or without Rapid Maxillary Expansion and Age Factors in Treating Class III Malocclusion: A Meta-Analysis

PubMed Central

Zhang, Wei; Qu, Hong-Chen; Yu, Mo; Zhang, Yang

2015-01-01

We conducted a comprehensive meta-analysis of 12 studies to examine whether maxillary protraction face mask associated with rapid maxillary expansion (FM/RME) could be an effective treatment for Class III malocclusion and to evaluate the effect of timing on treatment response. Patients with a maxillary deficiency who were treated with FM with or without RME were compared with those who had an untreated Class III malocclusion. In both treatment groups, forward displacement of the maxilla and skeletal changes were found to be statistically significant. In addition, posterior rotation of the mandible and increased facial height were more evident in the FM group compared with the control group. However, no significant differences were observed between the early treatment groups and late treatment groups. The results indicated that both FM/RME and FM therapy produced favorable skeletal changes for correcting anterior crossbite, and the curative time was not affected by the presence of deciduous teeth, early mixed dentition or late mixed dentition in the patient. PMID:26068221

Assessment of maxillary position. Implant vs cephalometric methods.

PubMed

Verayannont, Panisha; Hägg, Urban; Wong, Ricky W K; McGrath, Colman; Yeung, Shadow

2010-09-01

To compare changes in maxillary position assessed from a maxillary implant and three cephalometric methods based on linear measurements. Series of tracings of the maxilla obtained around puberty from an implant study were analyzed. The displacement of the implant was used to determine the direction and amount of "actual" maxillary growth. Displacement of point A was measured according to three cephalometric methods. The values obtained from absolute, horizontal, and vertical displacement of point A by three cephalometric methods and by the implant method were compared. Results showed that estimation of displacement of the maxilla by three cephalometric methods (point A) was significantly larger than that of the implant method in all directions. The average difference in the horizontal plane was 0.7 mm, 1.2 mm, and 1.6 mm, respectively; the average difference in the vertical plane was 2.2 mm, 2.5 mm, and 3.6 mm, respectively. Estimations of changes in maxillary position by the implant method and by cephalometric methods were not proportional. All three cephalometric methods overestimated changes in the position of the maxilla.

Treatment Options for Class III Malocclusion in Growing Patients with Emphasis on Maxillary Protraction

PubMed Central

Azamian, Zeinab; Shirban, Farinaz

2016-01-01

It is very difficult to diagnose and treat Class III malocclusion. This type of malocclusion involves a number of cranial base and maxillary and mandibular skeletal and dental compensation components. In Class III malocclusion originating from mandibular prognathism, orthodontic treatment in growing patients is not a good choice and in most cases orthognathic surgery is recommended after the end of growth. Approximately 30–40% of Class III patients exhibit some degree of maxillary deficiency; therefore, devices can be used for maxillary protraction for orthodontic treatment in early mixed dentition. In cases in which dental components are primarily responsible for Class III malocclusion, early therapeutic intervention is recommended. An electronic search was conducted using the Medline database (Entrez PubMed), the Cochrane Collaboration Oral Health Group Database of Clinical Trials, Science Direct, and Scopus. In this review article, we described the treatment options for Class III malocclusion in growing patient with an emphasis on maxillary protraction. It seems that the most important factor for treatment of Class III malocclusion in growing patient is case selection. PMID:27144056

Bone-anchored maxillary expansion and bilateral interoral mandibular distraction osteogenesis in adult with severe obstructive sleep apnea syndrome.

PubMed

Nie, Ping; Zhu, Min; Lu, Xiao-Feng; Fang, Bing

2013-05-01

Severe obstructive sleep apnea syndrome (OSAS) threatens patients' lives. To solve ventilation problem, snoring, and avoid another orthognathic surgery for mandibular advancement, bone-anchored rapid maxillary expansion and bilateral interoral mandibular distraction osteogenesis were tried on a 20-year-old Chinese male patient with severe skeletal class II malocclusion and OSAS.The patient had polysomnography (apnea-hypopnea index 54.2), body mass index measurement (19.7 kg/m), and cephalometry before the treatment. Bone-anchored rapid maxillary expansion was performed for the correction of maxillary transverse and minor sagittal deficiency and the improvement of nasal airflow by decreasing nasal resistance. Bilateral interoral mandibular distraction osteogenesis was operated to lengthen the small, retruded mandible by 15 mm. Orthodontic treatment after the maxillary expansion and mandibular distraction osteogenesis can help obtain stable occlusion.The Epworth Sleepiness Scale, a questionnaire for temporomandibular joint, cephalometric analysis, polysomnography, acoustic rhinometry, and multislice spiral computed tomography were performed to evaluate changes from the treatment. All the results showed that the patient had a significantly alleviated OSAS. In addition, an acceptable occlusion was also obtained.

Maxillary distraction in patients with cleft deformity using a rigid external distraction device: a pilot study on the distraction ratio of the maxilla to the device.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2004-01-01

We examined the ratio between actual maxillary distraction and the distraction of the rigid external distraction device (Rigid external distraction (RED) system) used for maxillary distraction in patients with a cleft deformity. Twelve patients were examined. The amount of maxillary advancement was measured on lateral cephalograms and divided by the activation amount on the RED system. The value obtained was represented as the distraction ratio of the maxilla to the system. The mean ratio in 10 patients with complete cleft lip, palate, and alveolus (complete cleft) was 0.24. However, the ratios in two patients with cleft lip and alveolus or soft cleft palate (incomplete cleft) were considerably higher than the mean ratios in patients with complete cleft. When the maxilla is distracted in patients with complete cleft using the RED system, the amount of activation on the system needs to be about four times the amount of planned maxillary distraction. However, the distraction ratio may be affected by the type of cleft.

Long-term maxillomandibular skeletal and dental changes in children with cleft lip and palate after maxillary distraction.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2006-09-01

Long-term skeletal and dental changes were examined in 8 children with cleft lip and palate who underwent maxillary distraction to allow the maxilla to catch up to their mandibular growth at the treatment point. Changes in the overjet (OJ), overbite (OB), and positions of the anterior nasal spine (ANS), upper incisors (U1), pogonion (Pog), and lower incisors (L1) were measured on preoperative to 36 months postoperative lateral-cephalograms. In most of the children, the long-term changes after the maxillary distraction resulted in an inferior growth of the maxilla and anteroinferior growth of the mandible. This seems to suggest that maxillary distraction performed during childhood needs considerable overcorrection. However, if the maxilla is distracted to an adult position during childhood, the masticatory functions of the children will markedly deteriorate until their jaws grow. Therefore, we believe that one goal of maxillary distraction during childhood can be to allow the maxilla to catch up to the mandibular growth of the children at the treatment point.

Evidence from tooth surface morphology for a posterior maxillary origin of the proteroglyph gang

USGS Publications Warehouse

Jackson, K.; Fritts, T.H.

1995-01-01

Although the front-fanged venom delivery system of the Elapidae is believed to be derived from an aglyphous or opisthoglyphous colubroid ancestor, opinion is divided as to the end of the maxilla on which the proteroglyph fang originated. This study was undertaken to determine whether the evolutionary precursor of the proteroglyph fang was (a) a grooved posterior fang which migrated anteriorly, or (b) an enlarged anterior tooth which secondarily developed a groove for the conduction of venom. The surface morphology of the maxillary teeth of colubrid genera was examined using scanning electron microscopy. Ridges present on the lingual and labial surfaces of anterior maxillary teeth and on the anterior and posterior surfaces of posterior maxillary teeth were identified as morphological markers of potential value in distinguishing the anterior and posterior maxillary teeth of colubrid snakes, and in determining the origin of the proteroglyph fang. Patterns of ridges on the surfaces of elapid fangs examined were found to be consistent with the hypothesis that the evolutionary precursor of the proteroglyph fang was an opisthoglyph fang which migrated anteriorly.

Transverse maxillary and mandibular growth during and after bionator therapy: study with metallic implants.

PubMed

Monini, André da Costa; Júnior, Luiz Gonzaga Gandini; Maia, Luiz Guilherme Martins; Pinto, Ary dos Santos

2013-01-01

This study evaluated posteroanterior cephalograms before and after treatment and long term follow-up of Class II division 1 patients treated with bionator. The objective was to demonstrate the transverse growth of maxilla and mandible during and after bionator therapy. Measurement of transverse dimensions between posterior maxillary and mandibular implants, as well as the distances between the buccal, gonial and antegonial points were recorded. Measurements were analyzed at three periods: T1 - before bionator therapy, T2 - after bionator therapy and T3 - 5.74 years after T2. There was statistically significant transverse increase due to growth and/or treatment for all variables, except for the distance between the anterior maxillary implants. During the study period only the anterior maxillary area did not show transverse growth.

[Treatment of enophthalmos after severe malar-maxillary complex fracture with titanium mesh and high density polyethylene (Medpor)].

PubMed

Zhao, Yan-feng; Lu, Ping; Zhou, Xiao-nan; Qu, Chang-feng

2010-03-01

To study the surgical management of enophthalmos after severe malar maxillary complex fracture. The X-ray and CT examination were performed before operation to diagnose the orbital fracture and intraorbital tissue displacement. The fractured orbital rim was repositioned intraoperatively, followed by implantation of shaped titanium mesh to rebuild the orbital floor. The Medpor was inserted above the titanium mesh to correct the enophthalmos. From Sept. 2007 to Jan. 2009, 6 cases of enophthalmos after severe malar-maxillary complex fracture were treated. The enophthalmos was corrected or improved obviously in all the patients. The enophthalmos after severe malar-maxillary complex fracture can be corrected or obviously improved. Shaped titanium mesh can be used to rebuild the orbital floor with the Medpor to reconstruct the intraorbital tissue volume.

Segmental maxillary distraction with a novel device for closure of a wide alveolar cleft

PubMed Central

Bousdras, Vasilios A.; Liyanage, Chandra; Mars, Michael; Ayliffe, Peter R

2014-01-01

Treatment of a wide alveolar cleft with initial application of segmental distraction osteogenesis is reported, in order to minimise cleft size prior to secondary alveolar bone grafting. The lesser maxillary segment was mobilised with osteotomy at Le Fort I level and, a novel distractor, facilitated horizontal movement of the dental/alveolar segment along the curvature of the maxillary dental arch. Following a latency period of 4 days distraction was applied for 7 days at a rate of 0.5 mm twice daily. Radiographic, ultrasonographic and clinical assessment revealed new bone and soft tissue formation 8 weeks after completion of the distraction phase. Overall the maxillary segment did move minimising the width of the cleft, which allowed successful closure with a secondary alveolar bone graft. PMID:24987601

Segmental maxillary distraction with a novel device for closure of a wide alveolar cleft.

PubMed

Bousdras, Vasilios A; Liyanage, Chandra; Mars, Michael; Ayliffe, Peter R

2014-01-01

Treatment of a wide alveolar cleft with initial application of segmental distraction osteogenesis is reported, in order to minimise cleft size prior to secondary alveolar bone grafting. The lesser maxillary segment was mobilised with osteotomy at Le Fort I level and, a novel distractor, facilitated horizontal movement of the dental/alveolar segment along the curvature of the maxillary dental arch. Following a latency period of 4 days distraction was applied for 7 days at a rate of 0.5 mm twice daily. Radiographic, ultrasonographic and clinical assessment revealed new bone and soft tissue formation 8 weeks after completion of the distraction phase. Overall the maxillary segment did move minimising the width of the cleft, which allowed successful closure with a secondary alveolar bone graft.

Periodontal evaluation in patients undergoing maxillary expansion.

PubMed

Carmen, M; Marcella, P; Giuseppe, C; Roberto, A

2000-09-01

Maxillary transverse diameter expansion is a treatment various authors have claimed is related to the development of gingival recession on the teeth of the upper arch. The aim of the present study was to compare such an incidence in two different groups of patients: those treated with surgically assisted rapid maxillary expansion and orthopedic expansion, respectively. Both treatments achieved the goal of expanding the transverse dimension (5.3 and 4.4 mm, respectively), but a significant difference was shown by the chi 2 test for the incidence of gingival recession of premolar/molar upper teeth, more than double for the latter than for the former. Therefore, surgically assisted rapid maxillary expansion seems to be an orthodontically effective procedure, safer than the orthopedic treatment regarding the possible development of mucogingival problems.

Sinus Anatomy

MedlinePlus

... ARS HOME ANATOMY Nasal Anatomy Sinus Anatomy Nasal Physiology Nasal Endoscopy Skull Base Anatomy Virtual Anatomy Disclosure ... ANATOMY > Sinus Anatomy Nasal Anatomy Sinus Anatomy Nasal Physiology Nasal Endoscopy Skull Base Anatomy Virtual Anatomy Disclosure ...

Computed micro-tomographic evaluation of glide path with nickel-titanium rotary PathFile in maxillary first molars curved canals.

PubMed

Pasqualini, Damiano; Bianchi, Caterina Chiara; Paolino, Davide Salvatore; Mancini, Lucia; Cemenasco, Andrea; Cantatore, Giuseppe; Castellucci, Arnaldo; Berutti, Elio

2012-03-01

X-ray computed micro-tomography scanning allows high-resolution 3-dimensional imaging of small objects. In this study, micro-CT scanning was used to compare the ability of manual and mechanical glide path to maintain the original root canal anatomy. Eight extracted upper first permanent molars were scanned at the TOMOLAB station at ELETTRA Synchrotron Light Laboratory in Trieste, Italy, with a microfocus cone-beam geometry system. A total of 2,400 projections on 360° have been acquired at 100 kV and 80 μA, with a focal spot size of 8 μm. Buccal root canals of each specimen (n = 16) were randomly assigned to PathFile (P) or stainless-steel K-file (K) to perform glide path at the full working length. Specimens were then microscanned at the apical level (A) and at the point of the maximum curvature level (C) for post-treatment analyses. Curvatures of root canals were classified as moderate (≤35°) or severe (≥40°). The ratio of diameter ratios (RDRs) and the ratio of cross-sectional areas (RAs) were assessed. For each level of analysis (A and C), 2 balanced 2-way factorial analyses of variance (P < .05) were performed to evaluate the significance of the instrument factor and of canal curvature factor as well as the interactions of the factors both with RDRs and RAs. Specimens in the K group had a mean curvature of 35.4° ± 11.5°; those in the P group had a curvature of 38° ± 9.9°. The instrument factor (P and K) was extremely significant (P < .001) for both the RDR and RA parameters, regardless of the point of analysis. Micro-CT scanning confirmed that NiTi rotary PathFile instruments preserve the original canal anatomy and cause less canal aberrations. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Functional Characterization of the Octenol Receptor Neuron on the Maxillary Palps of the Yellow Fever Mosquito, Aedes aegypti

DTIC Science & Technology

2011-06-30

Functional Characterization of the Octenol Receptor Neuron on the Maxillary Palps of the Yellow Fever Mosquito, Aedes aegypti Alan J. Grant, Joseph C...Dickens JC (2011) Functional Characterization of the Octenol Receptor Neuron on the Maxillary Palps of the Yellow Fever Mosquito, Aedes aegypti . PLoS...palps. Both sexes of mosquitoes possess basiconic sensilla that contain three neurons; in Aedes aegypti these sensilla number about 35 in females and 21

The occurrence of paraesthesia of the maxillary division of the trigeminal nerve after dental local anaesthetic use: a case report.

PubMed

Moorthy, Advan; Stassen, Leo F A

2015-01-01

Paraesthesia can be a complication of surgical intervention. Its occurrence after dental local anaesthetic use is a rare event in general dental practice. Reported cases have mainly described its presentation for the mandibular division of the trigeminal nerve with very few reports for the maxillary division of this nerve. This report describes a case of paraesthesia in the maxillary region following local anaesthetic use prior to removal of an upper molar tooth.

Familial ring (18) mosaicism in a 23-year-old young adult with 46,XY,r(18) (::p11→q21::)/46,XY karyotype, intellectual disability, motor retardation and single maxillary incisor and in his phenotypically normal mother, karyotype 47,XX,+r(18)(::p11→q21::)/46,XX.

PubMed

Balci, Sevim; Tümer, Celal; Karaca, Ciğdem; Bartsch, Oliver

2011-05-01

We report on a 23-year-old man with craniofacial findings of the holoprosencephaly spectrum disorder (microcephaly, hypotelorism, depressed nasal bridge, single median maxillary central incisor), fusion of C2-C3 vertebrae, intellectual disability, and severe sleep apnea. Chromosome analysis of blood lymphocytes showed 75% ring (18) cells and 25% normal cells, karyotype mos 46,XY,r(18)(::p11→q21::)[75]/46,XY[25]. His mother was phenotypically normal except for a double ureter and bifid renal pelvis as in his son. She had a supernumerary ring (18) in 10% of blood lymphocytes, karyotype mos 47,XX,+r(18)(::p11→q21::)[10]/46,XX[90]. Familial ring (18) is a rare cytogenetic abnormality. This is the first report of a mother with a supernumerary ring (18) and a son with ring (18) mosaicism. Interestingly, the son showed a true mosaicism (mixoploidy) of ring (18) and normal cells. The mother's 46,XX cells could be easily explained by mitotic instability and ring loss during cell division. However, the coexistence of ring (18) and normal cells in the son is unusual. Possibly, during early postzygotic divisions of a 47,XY,+r(18) zygote, two (possibly subsequent) genetic events could have occurred, one when one normal chromosome 18 was lost (resulting in a cell line with ring 18), and one when the ring 18 was lost (resulting in a cell line without ring, "escape to normal"). Alternatively, the zygote of the son could have been 46,XY,r(18), and postzygotic loss of the ring 18 could have resulted in monosomy 18 cells followed by duplication of chromosome 18 in these cells (a rare mechanism for cell survival previously described as "compensatory" isodisomy). Copyright © 2011 Wiley-Liss, Inc.

The use of three-dimensional imaging to evaluate the effect of conventional orthodontic approach in treating a subject with facial asymmetry

PubMed Central

Kheir, Nadia Abou; Kau, Chung How

2016-01-01

The growth of the craniofacial skeleton takes place from the 3rd week of intra-uterine life until 18 years of age. During this period, the craniofacial complex is affected by extrinsic and intrinsic factors which guide or alter the pattern of growth. Asymmetry can be encountered due to these multifactorial effects or as the normal divergence of the hemifacial counterpart occurs. At present, an orthodontist plays a major role not only in diagnosing dental asymmetry but also facial asymmetry. However, an orthodontist's role in treating or camouflaging the asymmetry can be limited due to the severity. The aim of this research is to report a technique for facial three-dimensional (3D) analysis used to measure the progress of nonsurgical orthodontic treatment approach for a subject with maxillary asymmetry combined with mandibular angular asymmetry. The facial analysis was composed of five parts: Upper face asymmetry analysis, maxillary analysis, maxillary cant analysis, mandibular cant analysis, and mandibular asymmetry analysis which were applied using 3D software InVivoDental 5.2.3 (Anatomage Company, San Jose, CA, USA). The five components of the facial analysis were applied in the initial cone-beam computed tomography (T1) for diagnosis. Maxillary analysis, maxillary cant analysis, and mandibular cant analysis were applied to measure the progress of the orthodontics treatment (T2). Twenty-two linear measurements bilaterally and sixteen angular criteria were used to analyze the facial structures using different anthropometric landmarks. Only angular mandibular asymmetry was reported. However, the subject had maxillary alveolar ridge cant of 9.96°and dental maxillary cant was 2.95° in T1. The mandibular alveolar ridge cant was 7.41° and the mandibular dental cant was 8.39°. Highest decrease in the cant was reported maxillary alveolar ridge around 2.35° and in the mandibular alveolar ridge around 3.96° in T2. Facial 3D analysis is considered a useful adjunct in evaluating inter-arch biomechanics. PMID:27563618

Maxillary distraction complications in cleft patients.

PubMed

Jeblaoui, Y; Morand, B; Brix, M; Lebeau, J; Bettega, G

2010-06-01

Cleft lip and palate (CLP) patients often present with a class III malocclusion in connection with a three dimensional maxillary hypoplasia. Twenty-five to 60% of these patients need maxillary advancement. Two solutions are possible: orthognathic surgery and maxillary distraction. The purpose of this study was to evaluate the complications of maxillary distraction in CLP patients. Data was collected from the records of patients treated in our surgery unit between 2000 and 2007. Among the eight patients (four male and four female), five presented with a bilateral CLP, two with a unilateral CLP, and one with a unilateral cleft lip associated to a soft palate cleft. The average age at surgery was 17 years. All underwent a Le Fort I osteotomy with a pterygomaxillary disjunction. An external distractor was used for the first two patients and an internal distractor for the six following patients. After a seven-day latency, activation was implemented at a rate of 1mm twice a day. The average period of consolidation was four months. Maxillary advancement ranged between 7 and 19mm, with an average of 12.6mm. The average follow-up was four years. Complications were noted in seven patients: one intra-operative hemorrhage, one avulsion of a tooth anchored at the pterygoid process during osteotomy, three cases of device dysfunction, two cases of significant pain during activation, one loosening of the orthodontic arch in an external system, two cases of labial ulceration, and one maxillary sinusitis due to migration of a wisdom tooth. Complications of maxillary distraction in CLP patients were very frequent. Most were related to the device and did not interfere with the final result. This must be taken into account when indicating distraction and choosing the device. Two types of complications can occur during distraction: those related to the osteotomy and those related to the device. The complications related to the osteotomy are linked to the cicatricial ground of previous surgery. They are not specific to distraction. The comfort of the internal device is undeniable, but the design of some models must be reviewed to improve their tolerance. Copyright 2010 Elsevier Masson SAS. All rights reserved.