Proceedings of the International Workshop on Non-Crystalline Solids (3rd) Held in Matalascanas (Costa de la Luz), Spain on November 5-8, 1991. Trends in Non-Crystalline Solids,

DTIC Science & Technology

1992-01-01

line), and by Eq. 5 (broken line). 4. Acknowledgements Financial support has been provided by the "Plan Nacional de Nuevos Materiales " of the CICYT... Materiales , C. S. I. C. Universidad de Sevilla ’ World Scientific Singapore -New Jersey -London o Hong Kong Pubish. by World Scientific Publishing Co. Pte...V.E. Martin, J.M. Gonzd±lez Instituto de Ciencia de Materiales - CSIC. Serrano 144. 28006 Madrid, Spain and L. Schultz, K. Schnitzke Siemens AG

IEEE Workshop on Real-Time Operating Systems (8th) Held in Atlanta, Georgia on 15-17 May 1991

DTIC Science & Technology

1992-01-01

and sug- posiur, pages 259-169. !988. gestions in earlier drafts of this paper. [12] L. Sha. J. Lehoczky, and R. Rajkumar. Solutions for some...Telecomunicacion, * j Ciudad Universitaria , E-28040 Madrid, Spain, jpuente@dit.upm.es, Tel:(34-1)3367342, Fax: (34-1)5432077. I Donner, Marc, IBM Research, P.O...Telecomunicacion Ciudad Universitaria E-28040 Madrid SPANJE Dear Juan, Enclosed please find the Final Report on the 17th IFAC/IFIP Workshop on Real Time Programming

Assessment of chemical analyses by means of portable XRF in the Roman mortars of Complutum archaeological site (Spain)

NASA Astrophysics Data System (ADS)

Ergenç, Duygu; Freire, David; Fort, Rafael

2016-04-01

The chemical characterization of lime mortars used in Roman period has a great significance and plays a key role in the acquisition of knowledge with respect to construction technology, raw materials and, accordingly, in its conservation works. When it comes to cultural heritage studies, sampling is always complicated since the minimum damage is the primary concern. The use of non-destructive techniques and direct measurements with portable devices reduce the amount of samples and time consumed in analyses, consequently it could be stated that such techniques are extremely useful in conservation and restoration works. In this study, the portable XRF device was used to determine the composition of chemical elements which compose the Roman lime mortars in the archaeological site of Complutum, Alcalá de Henares (Madrid, Spain) which is listed as a World Heritage Site by UNESCO since 1998. Portable XRF devices have some detection limits below the ones of the laboratory equipment that are immovable and require sampling. In order to correlate the results, sampling and grinding were initially done to prepare the powders for the laboratory XRF analysis with the following elements: Si, Al, Fe, Ca, Mg, K, Ti, Nb, Zr, Sr, Rb, Pb, Zn and Cr. The analyses of the powdered samples were conducted with the laboratory equipment PHILIPS Magix Pro (PW-2440) from the Centre of Scientific Instrumentation CIC in the University of Granada, and the results were compared to the results gathered with X Ray Florescence (EDTRX) THERMO NITON model XL3T from the Petrophysics Laboratory Geosciences Institute IGEO (CSIC-UCM). Analyses were performed on the surfaces of the samples -without any previous preparation-, and on the powdered samples to compare the variations between both traditional XRF analyses and the portable XRF. A good correlation was found among the results obtained by the laboratory equipment, the portable device as well as the surface measurements. The results of this study enable to differentiate the types of lime mortars used in the site (Caementicium and Signinum) and in different buildings that form the Roman city. Acknowledgements: Thanks to the project CLIMORTEC (BIA2014-53911-R), to CEI-Moncloa of UCM-UPM-UCM and to Madrid Community for funding the Geomateriales2 (P2013/MIT2914) program

An interview with Angela Nieto. Interviewed by Eva Amsen.

PubMed

Nieto, Angela

2012-04-01

Angela Nieto is Full Professor at the Instituto de Neurociencias (CSIC-UMH) in Alicante, Spain, and Head of the institute's Developmental Neurobiology Unit. She is also the current president of the Spanish Society for Developmental Biology (Sociedad Española de Biología del Desarollo, SEBD). We interviewed her to talk about the plans of the SEBD for the coming years.

The ICTJA-CSIC Science Week 2016: an open door to Earth Sciences for secondary education students

NASA Astrophysics Data System (ADS)

Cortes-Picas, Jordi; Diaz, Jordi; Fernandez-Turiel, Jose-Luis; Garcia-Castellanos, Daniel; Geyer, Adelina; Jurado, Maria-Jose; Montoya, Encarni; Rejas Alejos, Marta; Sánchez-Pastor, Pilar; Valverde-Perez, Angel

2017-04-01

The Science Week is one of the main scientific outreach events every year in Spain. The Institute of Earth Sciences Jaume Almera of CSIC (ICTJA-CSIC) participates in it since many years ago, opening its doors and proposing several activities in which it is shown what kind of multidisciplinary research is being developed at the Institute and in Geosciences. The activities,developed as workshops, are designed and conducted by scientific and technical personnel of the centre, who participates in the Science Week voluntarily. The activities proposed by the ICTJA-CSIC staff are designed for a target audience composed by secondary school students (12-18 years). The ICTJA-CSIC joined Science Week 2016 in the framework of the activity entitled "What we investigate in Earth Sciences?". The aim is to show to the society what is being investigated in the ICTJA-CSIC. In addition, it is intended, with the contact and interaction between the public and the institute researchers, to increase the interest in scientific activity and, if possible, to generate new vocations in the field of the Earth Sciences among secondary school pupils. We show in this communication the experience of the Science Week 2016 at the ICTJA-CSIC, carried out with the effort and commitment of the of the Institute's personnel with the outreach of Earth Sciences research. Between November 14th and 19th 2016, more than 100 students from four secondary schools from Barcelona area visited the Institute and took part in the Science Week. A total of six interactive workshops were prepared showing different features of seismology, geophysical borehole logging, analog and digital modelling, paleoecology, volcanology and geochemistry. As a novelty, this year a new workshop based on an augmented reality sandbox was offered to show and to simulate the processes of creation and evolution of the topographic relief. In addition, within the workshop dedicated to geophysical borehole logging, six exact replicates of sediment cores from outstanding expeditions of the Ocean Drilling Program (ODP) and the International Ocean Discovery Program IODP (IODP) were shown to the visitors. We acknowledge the collaboration of ODP and IODP programs and the FECYT in the development of the Science Week 2016 at ICTJA-CSIC.

Crude cellulase from oil palm empty fruit bunch by Trichoderma asperellum UPM1 and Aspergillus fumigatus UPM2 for fermentable sugars production.

PubMed

Ibrahim, M F; Razak, M N A; Phang, L Y; Hassan, M A; Abd-Aziz, S

2013-07-01

Cellulase is an enzyme that converts the polymer structure of polysaccharides into fermentable sugars. The high market demand for this enzyme together with the variety of applications in the industry has brought the research on cellulase into focus. In this study, crude cellulase was produced from oil palm empty fruit bunch (OPEFB) pretreated with 2% NaOH with autoclave, which was composed of 59.7% cellulose, 21.6% hemicellulose, and 12.3% lignin using Trichoderma asperellum UPM1 and Aspergillus fumigatus UPM2. Approximately 0.8 U/ml of FPase, 24.7 U/ml of CMCase and 5.0 U/ml of β-glucosidase were produced by T. asperellum UPM1 at a temperature of 35 °C and at an initial pH of 7.0. A 1.7 U/ml of FPase, 24.2 U/ml of CMCase, and 1.1 U/ml of β-glucosidase were produced by A. fumigatus UPM2 at a temperature of 45 °C and at initial pH of 6.0. The crude cellulase was best produced at 1% of substrate concentration for both T. asperellum UPM1 and A. fumigatus UPM2. The hydrolysis percentage of pretreated OPEFB using 5% of crude cellulase concentration from T. asperellum UPM1 and A. fumigatus UPM2 were 3.33% and 19.11%, with the reducing sugars concentration of 1.47 and 8.63 g/l, respectively.

Status of women in physics in Spain in 2011

NASA Astrophysics Data System (ADS)

López-Sancho, M. P.; Carreras, C.; Chevalier, M.; Campabadal, F.; Yzuel, M. J.

2013-03-01

We present statistical data updated from the 2008 IUPAP International Conference on Women in Physics. Despite several gender equality measures adopted by the Spanish government, updated data exhibit the same trend: the percentage of women at the staff levels in the universities and at the Spanish High Research Council (Consejo Superior de Investigaciones Científicas; CSIC) remains approximately constant at about 33%. At the universities, the progress of women is slow. However, at the CSIC, both an increase in the number of available posts and the work of the Commission of Women and Science helped to increase the number of women in its top positions, although the net proportion among women and men did not change significantly. We describe the activities carried out by the Women in Physics group of the Spanish Physical Society.

Principal Components of Thermography analyses of the Silk Tomb, Petra (Jordan)

NASA Astrophysics Data System (ADS)

Gomez-Heras, Miguel; Alvarez de Buergo, Monica; Fort, Rafael

2015-04-01

This communication presents the results of an active thermography survey of the Silk Tomb, which belongs to the Royal Tombs compound in the archaeological city of Petra in Jordan. The Silk Tomb is carved in the variegated Palaeozoic Umm Ishrin sandstone and it is heavily backweathered due to surface runoff from the top of the cliff where it is carved. Moreover, the name "Silk Tomb" was given because of the colourful display of the variegated sandstone due to backweathering. A series of infrared images were taken as the façade was heated by sunlight to perform a Principal Component of Thermography analyses with IR view 1.7.5 software. This was related to indirect moisture measurements (percentage of Wood Moisture Equivalent) taken across the façade, by means of a Protimeter portable moisture meter. Results show how moisture retention is deeply controlled by lithological differences across the façade. Research funded by Geomateriales 2 S2013/MIT-2914 and CEI Moncloa (UPM, UCM, CSIC) through a PICATA contract and the equipment from RedLAbPAt Network

Research integrity: the experience of a doubting Thomas.

PubMed

Hettinger, Thomas P

2014-04-01

The sensational "reactome array" paper published in Science in 2009 was investigated in Spain by the Ethics Committee of Consejo Superior de Investigaciones Cientificas (CSIC) after Science issued an editorial expression of concern. The paper was retracted in 2010 because of "skepticism" due to "errors" in chemistry. The "errors" were so profound that many readers expressed doubt that they were really errors, but part of an elaborate hoax. I conducted a forensic analysis of mass spectrometry data in the paper's Supporting Online Material (SOM) and was able to prove that thousands of data values were in fact fabricated. The SOM contains signatures of improper extensive spreadsheet manipulations of incorrect atomic and molecular mass values as well as impossibly repetitive deviations of found molecular mass values from their expected values. No evidence of real mass spectrometry data was detected. Both CSIC and Science have been content to retract the paper without acknowledging the fabrications or assigning responsibility for them. Neither CSIC nor Science has expressed interest in having an independent investigation determining how the paper came to be written, reviewed and published. Their weak response to this episode is a daunting signal that there is an impending crisis in research integrity and science journalism.

Adaptation and Molecular Characterization of Two Malaysian Very Virulent Infectious Bursal Disease Virus Isolates Adapted in BGM-70 Cell Line

PubMed Central

Lawal, Nafi'u; Arshad, Siti Suri

2017-01-01

Two Malaysian very virulent infectious bursal disease virus (vvIBDV) strains UPM0081 and UPM190 (also known as UPMB00/81 and UPM04/190, respectively) isolated from local IBD outbreaks were serially passaged 12 times (EP12) in specific pathogen free (SPF) chicken embryonated eggs (CEE) by chorioallantoic membrane (CAM) route. The EP12 isolate was further adapted and serially propagated in BGM-70 cell line up to 20 passages (P20). Characteristic cytopathic effects (CPEs) were subtly observed at P1 in both isolates 72 hours postinoculation (pi). The CPE became prominent at P5 with cell rounding, cytoplasmic vacuoles, granulation, and detachment from flask starting from day 3 pi, up to 7 days pi with titers of 109.50 TCID50/mL and log109.80 TCID50/mL for UPM0081 and UPM190, respectively. The CPE became subtle at P17 and disappeared by P18 and P19 for UPM0081 and UPM190, respectively. However, the presence of IBDV was confirmed by immunoperoxidase, immunofluorescence, and RT-PCR techniques. Phylogenetic analysis showed that these two isolates were of the vvIBDV. It appears that a single mutation of UPM190 and UPM0081 IBDV isolates at D279N could facilitate vvIBDV strain adaptability in CEE and BGM-70 cultures. PMID:29230245

The reptile type specimens preserved in the Museo Nacional de Ciencias Naturales (CSIC) of Madrid, Spain.

PubMed

García-Díez, Teresa; González-Fernández, José E

2013-01-01

A first complete list of the reptile type specimens preserved in the Museo Nacional de Ciencias Naturales (CSIC) of Madrid (updated until 15 July 2012) is provided. The collection houses a total of 319 type specimens representing 24 taxa belonging to 6 families and 12 genera. There are 22 taxa represented by primary types (19 holotypes, 2 neotypes and 1lectotype) and at least one paratype, and only two taxa are exclusively represented by one secondary type (paratype). The collection is specially rich in Spanish endemisms. Special attention is deserved by the type series of many subspecies of Podarcis lilfordi described by A. Salvador and V. Pdéez-Mellado. All type specimens are housed in the Herpetological collection except Blanus mariae and Psaimodroims occidentalis type series and Psammodroims hispanicus (neotype) which are preserved in the DNA/Tissues Collection.

Vitamin D Counteracts an IL-23-Dependent IL-17A+IFN-γ+ Response Driven by Urban Particulate Matter.

PubMed

Mann, Elizabeth H; Ho, Tzer-Ren; Pfeffer, Paul E; Matthews, Nick C; Chevretton, Elfy; Mudway, Ian; Kelly, Frank J; Hawrylowicz, Catherine M

2017-09-01

Urban particulate matter (UPM) air pollution and vitamin D deficiency are detrimentally associated with respiratory health. This is hypothesized to be due in part to regulation of IL-17A, which UPM is reported to promote. Here, we used a myeloid dendritic cell (DC)-memory CD4 + T cell co-culture system to characterize UPM-driven IL-17A + cells, investigate the mechanism by which UPM-primed DCs promote this phenotype, and address evidence for cross-regulation by vitamin D. CD1c + myeloid DCs were cultured overnight with or without a reference source of UPM and/or active vitamin D (1,25[OH] 2 D 3 ) before they were co-cultured with autologous memory CD4 + T cells. Supernatants were harvested for cytokine analysis on Day 5 of co-culture, and intracellular cytokine staining was performed on Day 7. UPM-primed DCs increased the proportion of memory CD4 + T cells expressing the T helper 17 cell (Th17)-associated cytokines IL-17A, IL-17F, and IL-22, as well as IFN-γ, granulocyte-macrophage colony-stimulating factor, and granzyme B. Notably, a large proportion of the UPM-driven IL-17A + cells co-expressed these cytokines, but not IL-10, indicative of a proinflammatory Th17 profile. UPM-treated DCs expressed elevated levels of il23 mRNA and increased secretion of IL-23p40. Neutralization of IL-23 in culture reduced the frequency of IL-17A + IFN-γ + cells without affecting cell proliferation. 1,25(OH) 2 D 3 counteracted the UPM-driven DC maturation and inhibited the frequency of IL-17A + IFN-γ + cells, most prominently when DCs were co-treated with the corticosteroid dexamethasone, while maintaining antiinflammatory IL-10 synthesis. These data indicate that UPM might promote an inflammatory milieu in part by inducing an IL-23-driven proinflammatory Th17 response. Restoring vitamin D sufficiency may counteract these UPM-driven effects without obliterating important homeostatic immune functions.

Remote Sensing Plant Stress Using Combined Fluorescence and Reflectance Measurements for Early Detection of Defoliants within the Battlefield Environment

DTIC Science & Technology

2012-10-02

Sensing Imagery, Instituto de Agricultura Sostenible, Córdoba, Spain Young, D.R. 2007. Leaf to landscape in a barrier island environment.” Workshop...on Vegetation Stress Detection with Remote Sensing Imagery, Instituto de Agricultura Sostenible, Córdoba, Spain Young, D.R. and J.C. Naumann. 2007

International Workshop on Non-Crystalline Solids (3rd) Held in Matalascanas, Spain on November 5-8, 1991. Programme and Abstracts

DTIC Science & Technology

1991-11-01

CSIC. Universidad Sevilla A. Conde (Chairman) C.F. Conde A. Criado J. Leal M. Miln H. Miranda SPONSORS MINISTERIO DE EDUCACION Y CIENCIA JUNTA DE...DMS experiments leads to physical understanding of the different aspects of the observed phenomena : more especially shape, amplitude and displacement... especially light transmittance were also established. The analysis of Raman spectra of the examined glasses has revealed the presence of metaphosphate

PREFACE: The 19th European Sectional Conference on Atomic and Molecular Physics of Ionized Gases Preface: The 19th European Sectional Conference on Atomic and Molecular Physics of Ionized Gases

NASA Astrophysics Data System (ADS)

Gordillo-Vazquez, F. J.

2009-07-01

The 19th Europhysics Sectional Conference on the Atomic and Molecular Physics of Ionized Gases (ESCAMPIG-2008) took place in Granada (Spain) from 15 to 19 July 2008. The conference was mainly organized by the Spanish National Research Council (CSIC), with the collaboration and support of the University of Córdoba (UCO) and the Research Center for Energy, Environment and Technology (CIEMAT). It is already 35 years since the first ESCAMPIG in 1973. The first editions of ESCAMPIG were in consecutive years (1973 and 1974) but later on it became a biennial conference of the European Physical Society (EPS) initially focusing on the collisional and radiative atomic and molecular processes in low temperature plasmas. The successive ESCAMPIGs took place in Bratislava in 1976 (3rd), Essen in 1978 (4th), Dubrovnik in 1980 (5th) and so on until the last one organized in Granada in 2008 (19th), the first ESCAMPIG in Spain. A number of changes have taken place in the Granada edition of ESCAMPIG. First, the previous six topics that have remained unchanged for almost two decades (since 1990) have now been updated to become twelve new topics which, in the opinion of the International Scientific Committee (ISC), will enhance the opportunity for discussions and communication of new findings and developments in the field of low temperature plasmas. The new list of topics for ESCAMPIG is: • Atomic and molecular processes in plasmas • Transport phenomena, particle velocity distribution function • Physical basis of plasma chemistry • Plasma surface interaction (boundary layers, sheath, surface processes) • Plasma diagnostics • Plasma and dicharges theory and simulation • Self-organization in plasmas, dusty plasmas • Upper atmospheric plasmas and space plasmas • Low pressure plasma sources • High pressure plasma sources • Plasmas and gas flows • Laser produced plasmas Secondly, a new prize has been created, the `William Crookes' prize in Plasma Physics to be awarded biennially to a mid-career (10 to 20 years after PhD) researcher who has been judged to have made major contributions in one or more of the areas covered by ESCAMPIG. The prize was co-sponsored by the ESCAMPIG-2008 local committee, the European Physical Society (EPS) and Plasma Sources Science and Technology. The award was 1,000 Euros and a diploma along with hotel accommodation and waived fees to attend ESCAMPIG-2008 where the award was presented. The first `William Crookes' prize was awarded to Professor Dr Richard Van de Sanden from the Eindhoven University of Technology `for his major contributions to fundamental plasma-wall interaction studies and their use in plasma enhanced deposition and etching'. More than 290 scientists from 35 countries around the world attended ESCAMPIG-2008 in Granada. Also remarkable is the important number of registered students (87) that participated in the conference. The total number of abstracts submitted was over 330 with more than 300 poster presentations in the three scheduled poster sessions. The oral sessions involved 16 invited lectures and eight ISC selected hot topical presentations. In addition, two afternoon special sessions of ESCAMPIG-2008 were devoted to two workshops on: • Sprite chemistry and their impact in the upper atmosphere of the Earth, organized by Dr T Neubert and Dr F J Gordillo-Vazquez • Diagnostics of active species in plasma deposition of thin films, organized by Dr F L Tabarés Following a tradition started in previous ESCAMPIG editions, a special issue of {\\it Plasma Sources Science and Technology} (PSST) is published including peer-reviewed papers based on the invited lectures, hot topic presentations and workshop contributions. Many of the authors agreed to prepare and submit within deadline suitable articles with original results or in the form of reviews and critical overviews of their own published results. I would like to thank all the speakers for their co-operation and efforts in preparing interesting lectures and for preparing papers for the special issue of PSST devoted to ESCAMPIG XIX. These papers are an equilibrated representation of the topics treated during the conference. Their publication in PSST will significantly contribute to giving the contents of ESCAMPIG a wider audience. I would like to thank the International Scientific Committee, chaired by Professor W G Graham, for building up the Scientific Program of ESCAMPIG-2008. Finally, I want to thank the workshop organizers and all the sponsors (public institutions and companies) whose contribution was an essential part of the success of ESCAMPIG 2008 in Granada. F J Gordillo-Vazquez, CSIC, Granada, Spain Guest Editor

Influence of biological soil crusts at different successional stages in the implantation of biogeochemical cycles in arid and semiarid zones

NASA Astrophysics Data System (ADS)

Gil-Sotres, F.; Miralles, I.; Canton-Castilla, Y.; Domingo, F.; Leiros, M. C.; Trasar-Cepeda, C.

2012-04-01

Influence of biological soil crusts at different successional stages in the implantation of biogeochemical cycles in arid and semiarid zones I. Miralles1, F. Gil-Sotres2, Y. Cantón-Castilla3, F. Domingo1, M.C. Leirós2, C. Trasar-Cepeda4 1 Experimental Estation of Arid Zones (CSIC), E-04230 La Cañada de San Urbano, Almería, Spain. 2 Departamento Edafología y Química Agrícola, Grupo de Evaluación de la Calidad del Suelo, Unidad Asociada CSIC, Facultad de Farmacia, Universidad de Santiago de Compostela, E-15782 Santiago de Compostela, Spain. 3 University of Almería, Departamento de Edafología y Química Agrícola, E-04230-La Cañada de San Urbano, Almería, Spain. 4 Departamento Bioquímica del Suelo, IIAG-CSIC, Apartado 122, E-15708 Santiago de Compostela, Spain. Crusts (BSCs) are formed by a close association between soil particles and cyanobacteria, algae, lichens, bryophytes and microfungi in varying proportions. Their habitat is within or immediately on top of the uppermost millimetres of the soil and are the predominant surface cover in arid and semiarid zones. Among the diverse functions developed by BSCs in the ecosystem (hydrology, erosion, soil properties, etc.), one of the most important is its role in nutrient cycling. Within arid and semiarid environments, BSCs have been termed 'mantles of fertility' being considered hotspots of biogeochemical inputs, fixing C, N and P above- and below-ground. However, there are differences in N and C fixation rates between BSCs types. Early successional BSCs, dominated by cyanobacterial species, fix lower quantities of C and N than mature BSCs dominated by lichens. Although the positive effects of BSCs on biogeochemical soil cycles are widely accepted, no previous studies have evaluated the activities of the enzymes involved in C, N and P cycles of BSCs and how they are affected by the successional stage of the BSC. In this work, performed in the Tabernas desert (SE Spain), we studied the hydrolase enzymes involved in C (invertase, CM-cellulase, β-glucosidase), N (urease, BAA-protease, casein-protease) and P (phosphomonoesterase) cycles in BSCs at different successional stages (cyanobacteria represents the first successional stage, lichen Diploschistes diacapsis in an intermediate state and lichen Lepraria crassissima, with the greatest successional state). Our results show that BSCs at lower successional stage enriched the surface geological substrate in hydrolase enzymes to a lesser extent than mature BSCs (Lepraria crassissima), which show the highest values in all enzymatic activities. In contrast, the specific enzyme activities (activity values expressed per unit of carbon) were higher in the BSCs at lower successional stage, decreasing in the direction: cyanobacteria > Diploschistes diacapsis-lichen > Lepraria crassissima-lichen. These results suggest a different role of BSCs depending on their successional stage with regard to the implantation of biogeochemical cycles during the surface substrate colonization. Our conclusions are highly relevant to improve the knowledge of biogeochemical cycles in arid and semiarid areas. Keywords: Biological Soil Crusts, arid ecosystems, hydrolytic enzymes, biochemical activity

Effect of soiling in CPV systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vivar, M.; Herrero, R.; Anton, I.

2010-07-15

The effect of soiling in flat PV modules has been already studied, causing a reduction of the electrical output of 4% on average. For CPV's, as far as soiling produces light scattering at the optical collector surface, the scattered rays should be definitively lost because they cannot be focused onto the receivers again. While the theoretical study becomes difficult because soiling is variable at different sites, it becomes easier to begin the monitoring of the real field performance of concentrators and then raise the following question: how much does the soiling affect to PV concentrators in comparison with flat panels?'more » The answers allow to predict the PV concentrator electrical performance and to establish a pattern of cleaning frequency. Some experiments have been conducted at the IES-UPM and CSES-ANU sites, consisting in linear reflective concentration systems, a point focus refractive concentrator and a flat module. All the systems have been measured when soiled and then after cleaning, achieving different increases of I{sub SC}. In general, results show that CPV systems are more sensitive to soiling than flat panels, accumulating losses in I{sub SC} of about 14% on average in three different tests conducted at IES-UPM and CSES-ANU test sites in Madrid (Spain) and Canberra (Australia). Some concentrators can reach losses up to 26% when the system is soiled for 4 months of exposure. (author)« less

Protective effects of chebulic acid on alveolar epithelial damage induced by urban particulate matter.

PubMed

Lee, Kyung-Won; Nam, Mi-Hyun; Lee, Hee-Ra; Hong, Chung-Oui; Lee, Kwang-Won

2017-07-19

Chebulic acid (CA) isolated from T. chebula, which has been reported for treating asthma, as a potent anti-oxidant resources. Exposure to ambient urban particulate matter (UPM) considered as a risk for cardiopulmonary vascular dysfunction. To investigate the protective effect of CA against UPM-mediated collapse of the pulmonary alveolar epithelial (PAE) cell (NCI-H441), barrier integrity parameters, and their elements were evaluated in PAE. CA was acquired from the laboratory previous reports. UPM was obtained from the National Institutes of Standards and Technology, and these were collected in St. Louis, MO, over a 24-month period and used as a standard reference. To confirm the protection of PAE barrier integrity, paracellular permeability and the junctional molecules were estimated with determination of transepithelial electrical resistance, Western Blotting, RT-PCR, and fluorescent staining. UPM aggravated the generation of reactive oxygen species (ROS) in PAE and also decreased mRNA and protein levels of junction molecules and barrier integrity in NCI-H441. However, CA repressed the ROS in PAE, also improved barrier integrity by protecting the junctional parameters in NCI-H411. These data showed that CA resulted in decreased UPM-induced ROS formation, and the protected the integrity of the tight junctions against UPM exposure to PAE barrier.

Project-based learning applied to spacecraft power systems: a long-term engineering and educational program at UPM University

NASA Astrophysics Data System (ADS)

Pindado, Santiago; Cubas, Javier; Roibás-Millán, Elena; Sorribes-Palmer, Félix

2018-03-01

The IDR/UPM Institute is the research center responsible for the Master in Space Systems (MUSE) of Universidad Politécnica de Madrid (UPM). This is a 2-year (120 ECTS) master's degree focused on space technology. The UPMSat-2 satellite program has become an excellent educational framework in which the academic contents of the master are trained through project-based learning and following a multidisciplinary approach. In the present work, the educational projects developed and carried out in relation to spacecraft power systems at the IDR/UPM Institute are described. These projects are currently being developed in the framework represented by the aforementioned MUSE master's program and UPMSat-2.

System engineering at the MEGARA project

NASA Astrophysics Data System (ADS)

Pérez-Calpena, A.; García-Vargas, María. Luisa; Gil de Paz, A.; Gallego Maestro, J.; Carrasco Licea, E.; Sánchez Moreno, F.; Iglesias-Páramo, J.

2014-08-01

MEGARA (Multi-Espectrógrafo en GTC de Alta Resolución para Astronomía) is a facility instrument of the 10.4m GTC (La Palma, Spain) working at optical wavelengths that provides both Integral-Field Unit (IFU) and Multi- Object Spectrograph (MOS) capabilities at resolutions in the range R=6,000-20,000. The MEGARA focal plane subsystems are located at one of the GTC focal stations, while the MEGARA refractive VPH based spectrograph is located at one of the Nasmyth platforms. The fiber bundles conduct the light from the focal plane subsystems to the pseudo-slits at the entrance of the spectrograph. The project is an initiative led by Universidad Complutense de Madrid (Spain) in collaboration with INAOE (Mexico), IAA-CSIC (Spain) and Universidad Politécnica de Madrid (Spain) and is developed under contract with GRANTECAN. The project is carried out by a multidisciplinary and geographically distributed team, which includes the in-kind contributions of the project partners and personnel from several private companies. The MEGARA system-engineering plan has been tailored to the project and is being applied to ensure the technical control of the project in order to finally meet the science high-level requirements and GTC constrains.

Effects of Ureaplasma parvum lipoprotein multiple-banded antigen on pregnancy outcome in mice.

PubMed

Uchida, Kaoru; Nakahira, Kumiko; Mimura, Kazuya; Shimizu, Takashi; De Seta, Francesco; Wakimoto, Tetsu; Kawai, Yasuhiro; Nomiyama, Makoto; Kuwano, Koichi; Guaschino, Secondo; Yanagihara, Itaru

2013-12-01

Ureaplasma spp. are members of the family Mycoplasmataceae and have been considered to be associated with chorioamnionitis and preterm delivery. However, it is unclear whether Ureaplasma spp. have virulence factors related to these manifestations. The purpose of the present study was to determine whether the immunogenic protein multiple-banded antigen (MBA) from Ureaplasma parvum is a virulence factor for preterm delivery. We partially purified MBA from a type strain and clinical isolates of U. parvum, and also synthesized a diacylated lipopeptide derived from U. parvum, UPM-1. Using luciferase assays, both MBA-rich fraction MRF and UPM-1 activated the NF-κB pathway via TLR2. UPM-1 upregulated IL-1β, IL-6, IL-12p35, TNF-α, MIP2, LIX, and iNOS in mouse peritoneal macrophage. MRF or UPM-1 was injected into uteri on day 15 of gestation on pregnant C3H/HeN mice. The intrauterine MRF injection group had a significantly higher incidence of intrauterine fetal death (IUFD; 38.5%) than the control group (14.0%). Interestingly, intrauterine injection of UPM-1 caused preterm deliveries at high concentration (80.0%). In contrast, a low concentration of UPM-1 induced a significantly higher rate of fetal deaths (55.2%) than the control group (14.0%). The placentas of the UPM-1 injection group showed neutrophil infiltration and increased iNOS protein expression. Our data indicate that MBA from the clinical isolate of U. parvum is a potential virulence factor for IUFD and preterm delivery in mice and that the N-terminal diacylated lipopeptide is essential for the initiation of inflammation. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Committee for International Conference on Mechanical Engineering Research (ICMER 2011)

NASA Astrophysics Data System (ADS)

Yusoff, Ahmad Razlan Bin

2012-09-01

Scientific Advisory Committee: 1) Prof. Dr. Ahmad Kamal Ariffin (UKM) 2) Prof. Dr. Hj. Rosli Abu Bakar (UMP) 3) Prof. Dr. Hanafi Ismail (USM) 4) Prof. Ir. Dr. Mohd Jailani Mohd Nor (MoHE) 5) Prof. Dr. Zahari Taha (UMP) 6) Prof. Dr. Masjuki Haji Hassan 7) Prof. Ir. Dr. Ramesh Singh (UNITEN) 8) Prof. Dr. Razali Ayob (UTEM) 9) Prof. Dr. Wan Khairuddin (UTM) 10) Prof. Dr. Sulaiman Hj. Hasan (UTHM) 11) Prof. Dr. Zuraidah Mohd. Zain (UniMAP) 12) Prof. Dr. Horizon Gitano (USM) 13) Prof. Dr. K.V Sharma (UMP) 14) Prof. Dr. Shahrani Anuar (UMP) 15) Assoc. Prof. Dr. Abd Rashid Abd. Aziz (UTP) 16) Assoc. Prof. Dr. Aidy Ali (UPM) 17) Assoc. Prof. Dr. Saidur Rahman (UM) 18) Assoc. Prof. Dr. Md Abdul Maleque (UIA) Organizing Committee Chairman: Prof. Dr. Hj. Rosli Abu Bakar Co-Chair: Prof. Dr. Zahari Taha Co-Chair: Prof. Ir. Dr. Jailani Salihon Secretary: Dr. Rizalman Mamat Committee on Keynote Speaker 1) Kumaran Kadirgama (Chair) 2) Prof. Dr. K.V. Sharma 3) Haji Amirruddin Abdul Kadir 4) Miminorazeansuhaila Loman 5) Mohd Akramin Mohd Romlay Technical Committee (Peer Review & Proceedings) 1) Dr. Abdul Adam Abdullah (Chair) 2) Dr. Ahmad Razlan Yusoff 3) Mohd Yusof Taib 4) Dr. Md. Mustafizur Rahman 5) Dr. Hjh. Yusnita Rahayu 6) Dr. Gigih Priyandoko 7) Dr. Agung Sudrajad 8) Muhammad Hatifi Mansor 9) Mohd Fadzil Abdul Rahim Technical Committee (Panels & Session Chairs) 1) Dr. Mahadzir Ishak (Chair) 2) Prof. Dr. Shahrani Anuar 3) Dr. Maisara Mohyeldin Gasim Mohamed 4) Muhammad Ammar Nik Mu'tasim 5) Ahmad Basirul Subha bin Alias Technical Committee (Journal Publication) 1) Dr. Ahmad Razlan bin Yusoff (Chair) 2) Mohd Yusof Taib 3) Dr. Mahadzir Ishak 4) Dr. Abdul Adam Abdullah 5) Hj. Amirruddin Abdul Kadir 6) Hadi Abdul Salaam Bureau of Publicity & Website 1) Dr. Muhamad Arifpin Mansor (Chair) 2) Amir Abdul Razak 3) Idris Mat Sahat 4) Prof. Dr. Hj. Rosli Abu Bakar 5) Muhamad Zuhairi Sulaiman 6) Dr. Sugeng Ariyono 7) Asnul Hadi Ahmad 8) Mohd Tarmizy Che Kar 9) Mohd Padzly Radzi Bureau of Special Task & Poster 1) Lee Giok Chui (Chair) 2) Mohd Fadzil Abdul Rahim 3) Che Ku Eddy Nizwan 4) Hazami Che Hussain 5) Mohd Fazli Ismail 6) Mahdhir Mohd Yusof 7) Mohd Padzly Radzi 8) Rahimah Che Ramli Secretariats 1) Ir. Ahmad Rasdan Ismail (Chair) 2) Mohd Shahri Mohd Akhir 3) Luqman Hakim Ahmad Shah 4) Juliawati Alias 5) Nurazima Ismail 6) Mohamad Faizal Mohamed Zahri 7) Raja Allen Jordan Izzuddin Shah 8) Rosidah Mohd Norsat 9) Norshalawati Mat Yusof 10) Zainab Daud 11) Nur Sufiah Jamaludin 12) Azslinda Ibrahim 13) Nurul Azreen Zainal Abidin 14) Nurul Ashikin Mohd Khalil 15) Mohd Zaki Mohd Ali

Enhancement of archaeological heritage. El Risco de las Cuevas at Perales de Tajuña, Madrid (Spain)

NASA Astrophysics Data System (ADS)

Freire-Lista, David Martin; Alvarez de Buergo, Mónica; Fort, Rafael

2016-04-01

Heritage conservation has a great impact on the economy of a country. The enhancement of archaeological sites is an investment that promotes tourism and culture. The interdisciplinary knowledge of heritage should be the basis of its management. Preventive actions, non-destructive analytical techniques and monitoring for the conservation of these assets should be promoted. "El Risco de las Cuevas" is a highly decayed and nearly vertical gypsum escarpment which contains a series of dwellings excavated during the Chalcolithic and much more recent times. It is located at Perales de Tajuña, 40 km southeast of Madrid, Spain. This monument is approximately 70 metres high and 500 metres wide. It was listed as a cultural and monumental heritage site by the regional government of Madrid in 1998. The gypsum escarpment housing the dwellings forms part of a lower Miocene unit (Madrid Basin). Debris cones with a mixture of debris from the lower, medium and upper units are found at the bottom of the rockwall. The vulnerability of this monument to atmospheric agents has been studied using "in situ" monitoring techniques of humidity, temperature and rate of rockfalls. Drones have been used for aerial photography in the highest areas of the escarpment and have provided an information network of fractures likely to cause rockfall. Gypsum artificial accelerated ageing has been carried out in the laboratory, including freeze/thaw, wet/dry, thermal shock and dissolution tests. To determine the response of these accelerated ageing processes, density, micro-roughness, ultrasound velocities (Vp and Vs), air permeability and microscopy measurements were made before, during and after ageing tests. Geomorphological studies, rates of decay, material characteristics and durability tests indicate that the decay is controlled by the mineralogy, clay content and porosity of the gypsum rock, as well as microclimate, temperature changes and rock fractures. Rockfalls are particularly relevant in the safety of the monument and visitors. The enhancement of El Risco de las Cuevas has involved both local government (City council of Perales de Tajuña) and regional one (General Directorate of Historical Heritage of the Community of Madrid), besides the Institute of Geosciences IGEO (CSIC-UCM). Thanks to the collaboration of these agencies an interpretation centre has been created, preserving El Risco de las Cuevas in an educational and user-friendly manner. By conducting tours during the Science week of Madrid this promotes citizen participation, dissemination and social transfer, which are essential to preserve heritage. A project has been designed to monitor and ensure control and stability of the monument Acknowledgements: Community of Madrid for financing Geomateriales2 program (P2013/MIT2914), CEI-Moncloa UCM-UPM, Applied Petrology for Heritage Stone Materials Conservation Research Group and local government of Perales de Tajuña.

The Universal Plausibility Metric (UPM) & Principle (UPP).

PubMed

Abel, David L

2009-12-03

Mere possibility is not an adequate basis for asserting scientific plausibility. A precisely defined universal bound is needed beyond which the assertion of plausibility, particularly in life-origin models, can be considered operationally falsified. But can something so seemingly relative and subjective as plausibility ever be quantified? Amazingly, the answer is, "Yes." A method of objectively measuring the plausibility of any chance hypothesis (The Universal Plausibility Metric [UPM]) is presented. A numerical inequality is also provided whereby any chance hypothesis can be definitively falsified when its UPM metric of xi is < 1 (The Universal Plausibility Principle [UPP]). Both UPM and UPP pre-exist and are independent of any experimental design and data set. No low-probability hypothetical plausibility assertion should survive peer-review without subjection to the UPP inequality standard of formal falsification (xi < 1).

The Universal Plausibility Metric (UPM) & Principle (UPP)

PubMed Central

2009-01-01

Background Mere possibility is not an adequate basis for asserting scientific plausibility. A precisely defined universal bound is needed beyond which the assertion of plausibility, particularly in life-origin models, can be considered operationally falsified. But can something so seemingly relative and subjective as plausibility ever be quantified? Amazingly, the answer is, "Yes." A method of objectively measuring the plausibility of any chance hypothesis (The Universal Plausibility Metric [UPM]) is presented. A numerical inequality is also provided whereby any chance hypothesis can be definitively falsified when its UPM metric of ξ is < 1 (The Universal Plausibility Principle [UPP]). Both UPM and UPP pre-exist and are independent of any experimental design and data set. Conclusion No low-probability hypothetical plausibility assertion should survive peer-review without subjection to the UPP inequality standard of formal falsification (ξ < 1). PMID:19958539

On the wettability diversity of C/SiC surface: Comparison of the ground C/SiC surface and ablated C/SiC surface from three aspects

NASA Astrophysics Data System (ADS)

Wu, M. L.; Ren, C. Z.; Xu, H. Z.

2016-11-01

The coefficient of thermal conductivity was influenced by the wetting state of material. The wetting state usually depends on the surface wettability. C/SiC is a promising ceramic composites with multi-components. The wettability of C/SiC composites is hard to resort to the classical wetting theory directly. So far, few investigations focused on C/SiC surface wettability diversity after different material removal processes. In this investigation, comparative studies of surface wettability of ground C/SiC surface and laser-ablated C/SiC surface were carried out through apparent contact angle (APCA) measurements. The results showed that water droplets easily reached stable state on ground C/SiC surface; while the water droplets rappidly penetrated into the laser-ablated C/SiC surface. In order to find out the reason for wettability distinctions between the ground C/SiC surface and the laser-ablated C/SiC surface, comparative studies on the surface micro-structure, surface C-O-Si distribution, and surface C-O-Si weight percentage were carried out. The results showed that (1) A large number of micro cracks in the fuzzy pattern layer over laser-ablated C/SiC surfaces easily destoried the surface tension of water droplets, while only a few cracks existed over the ground C/SiC surfaces. (2) Chemical components (C, O, Si) were non-uniformly distributed on ground C/SiC surfaces, while the chemical components (C, O, Si) were uniformly distributed on laser-ablated C/SiC surfaces. (3) The carbon weight percentage on ground C/SiC surfaces were higher than that on laser-ablated C/SiC surfaces. All these made an essential contribution to the surface wettability diversity of C/SiC surface. Although more investigations about the quantitative influence of surface topography and surface chemical composition on composites wettability are still needed, the conslusion can be used in application: the wettability of C/SiC surface can be controlled by different material removal process without individual following up surface modification process.

CORRIGENDUM: Atoms riding Rayleigh waves Atoms riding Rayleigh waves

NASA Astrophysics Data System (ADS)

Benedek, G.; Echenique, P. M.; Toennies, J. P.; Traeger, F.

2010-09-01

In the original paper the affiliation list is incorrect. The correct address list is as follows: G Benedek1, 5, P M Echenique1, 2, J P Toennies3 and F Traeger4 1 Donostia International Physics Center (DIPC), Paseo Manuel de Lardizábal 4, 20018 Donostia—San Sebastián, Spain 2 Departamento de Física de Materiales and CFM (CSIC-UPV/EHU), Universidad del País Vasco/Euskal Herriko Unibertsitatea, E-20018 San Sebastián/Donostia, Spain 3 Max Planck-Institut für Dynamik und Selbstorganisation, Bunsenstraße 10 D-37073 Göttingen, Germany 4 Fakultät für Chemie und Biochemie, Ruhr-Universität Bochum Universitätsstraße 150, 44801 Bochum, Germany 5 Permanent address: Dipartimento di Scienza dei Materiali, Universitá di Milano-Bicocca, Via Cozzi 53, 20125 Milano, Italy

Panoramic view of the Fifth International Symposium on Stem Cell Therapy and Applied Cardiovascular Biotechnology, April 2008, Madrid (Spain).

PubMed

Villa, Adolfo; Sanz, Ricardo; Fernandez, M Eugenia; Elizaga, Jaime; Ludwig, Indrig; Sanchez, Pedro L; Fernandez-Aviles, Francisco

2009-03-01

The Fifth International Symposium on Stem Cell Therapy and Applied Cardiovascular Biotechnology was held on April 24th-25th, 2008, at the Auditorium of the High Council of Scientific Research of Spain (CSIC) in Madrid, as a continuation of a series of yearly meetings, organized in an attempt to encourage translational research in this field and facilitate a positive interaction among experts from several countries, along with industry representatives and journalists. In addition, members of the Task Force of the European Society concerning the clinical investigation of the use of autologous adult stem cells for repair of the heart gathered and discussed an update of the previous consensus, still pending of publication. In this article, we summarize some of the main topics of discussion, the state-of-the-art and latest advances in this field, and new challenges brought up for the near future.

International Workshop on Glasses and Ceramics, Hybrids and Nanocomposites from Gels (9th); Sol-Gel 󈨥 Held in Centre for Glass Research, The University of Sheffield, UK on 31 August-5 September 1997

DTIC Science & Technology

1998-01-01

Ormosils E. Blanco, M. Garcia-Hernändez, R. Jimenez-Rioböo, R. Liträn, C. Prieto and M. Ramirez -del-Solar 451 Hybrid Xerogel Structure and...Garcia M., E. Ramirez J., M.A. Mondragon, R. Ortega, P. Loza and A. Campero 657 Thermochromic Properties of Silver Colloids Embedded in Si02...C.S.I.C, Cantoblanco, E-28049-Madrid, Spain M. RAMIREZ -DEL-SOLAR Departamento de Fisica de la Materia Condensada, Universidad de Cadiz, Apartado

Kinematics of an oblique deformation front using paleomagnetic data; the Altomira-Loranca structures (Iberian Chain, Central Spain)

NASA Astrophysics Data System (ADS)

Valcarcel, M.

2013-05-01

Manoel Valcárcel1, 5, Ruth Soto2, Elisabet Beamud3, Belén Oliva-Urcia4 and Josep Anton Muñoz5 1 IGME, Departamento de Investigación y Prospección Geocientífica. C/ La Calera, 1, 28760 Tres Cantos; m.valcarcel@igme.es 2 IGME, Unidad de Zaragoza, C/ Manuel Lasala 44, 9 B, 50006 Zaragoza, Spain 3 Lab. Paleomagnetisme (CCiT UB-CSIC). ICT "Jaume Almera", Solé i Sabarís, s/n, 08028 Barcelona, Spain. 4 IPE-CSIC, Avda. Montañana 1005, 50059 Zaragoza, Spain 5 Grup Geodinàmica i Anàlisi de Conques, Universitat de Barcelona, Zona Universitària Pedralbes, 08028 Barcelona, Spain The Altomira and Loranca structures consist of a fold-and-thrust system detached on Triassic evaporites. They are oriented N-S to NNE-SSW and NNW-SSE at its northern and southern end, respectively, forming a subtle arc, oblique with respect to the general NW-SE trend of the Iberian Chain. The aim of this work is to characterize with paleomagnetic data the kinematic evolution of the the Altomira Range, located at the southwestern deformation front of the Iberian Chain, and of the structures within its associated piggy-back basin, the Loranca basin. This approach will also give clues regarding the primary and/or secondary origin of these structures to better characterize them in further studies (3D reconstruction and restoration, fault pattern). A total of 180 samples were obtained from 19 sites in Eocene, Oligocene and Miocene rocks (including clays, fine sandstones and limestones). They were analyzed by means of stepwise thermal demagnetization and subsequent measurement of the natural remanent magnetization (NRM). Although fold tests are not statistically significant, a primary origin of the magnetization is deduced by samples showing either normal or reverse polarity after bedding correction of the calculated characteristic components. Declinations of the site mean directions appear scattered after bedding correction suggesting differential vertical-axis rotations. Sites located at the northern and southern sectors display a clockwise rotation of 21 degrees and a counterclockwise rotation of 17 degrees, respectively. These results suggest that the present-day general orientation of the Altomira and Loranca structures respond to a progressive curvature, i. e. they were formed with N-S orientation, already oblique with respect to the NW-SE Iberian Chain trend, with a superimposed secondary deformation that slightly curved their originally linear trend.

Relation of runoff and soil erosion to weather types in the Mediterranean basin

NASA Astrophysics Data System (ADS)

Nadal-Romero, Estela; Peña-Angulo, Dhais

2017-04-01

Nadal-Romero, E. (1), Peña-Angulo, D. (1), Albaladejo, J. (2), Andreu, V. (3), Bahri, H. (4), Bagarello, V. (5), Batalla, R., (6), Bienes, R. (7), Campo, J. (3), Campo-Bescós, M.A. (8), Canatario, A. (9), Cantón, Y. (10), Casali, J. (8), Castillo, V. (2), Cid, P. (11), Cortesi, N. (12), Desir, G. (13), Díaz, E. (2), Ferreira, C. (14), Ferro, V. (5), Giménez, R. (8), Gimeno, E. (3), Gómez, J.A. (15), Gómez-Gutiérrez, A. (16), González-Hidalgo, J.C. (1), Klotz, S. (17) Kosmas, C. (18), Lana-Renault, N. (19), Lasanta, T. (20), Lázaro, R., (21), Le Bissonnais, Y. (22), Le Bouteiller, C. (17), Licciardello, F. (23), López-Tarazón, J.A. (24), Lucía, A. (25), Marín, C. (13), Marqués, M.J., (26) Martínez-Fernández, J. (27), Martínez-Mena, M. (2), Martínez-Murillo, J.F. (28), Mateos, L. (15), Novara, A. (5), Pachecho, E. (29), Raclot, D. (22), Rodríguez-Blanco, M.L. (30), Romero-Díaz, A. (31), Rubio, J.L. (3), Ruiz-Sinoga, J.D. (28), Schnabel, S. (16), Simonneaux, V. (32), Solé-Benet, A. (21), Taguas, E.V. (33), Taboada-Castro, M.M. (30), Taboada-Casto, M.T. (30), Todisco, F. (34), Úbeda, X. (29), Varouchakis, E. A. (35), Zabaleta, A. (36), Zorn, M. (37) (1) Departamento de Geografía, Instituto Universitario de Ciencias Ambientales (IUCA), Universidad de Zaragoza, Zaragoza, Spain (2) Soil and water conservation research group, CEBAS-CSIC, Murcia, Spain (3) Degradación y conservación de suelos, Centro de Investigación sobre Desertificación (CIDE), Valencia, Spain (4) INRGREF, Tunis, Tunisia (5) Department of Scienze Agrarie e Forestali, University of Palermo, viale delle scienze, Palermo, Italy (6) Department de Medi Ambient, Universitat de Lleida, Lleida, Spain (7) Departamento Investigación Aplicada y Extensión Agraria. Instituto Madrileño de Investigación y Desarrollo Rural, Agrario y Alimentario (IMIDRA), Madrid, Spain (8) Escuela Técnica Superior de Ingeniería Agrónoma, Universidad Pública de Navarra, Pamplona, Spain (9) Polytechnic Institute of Catelo Branco, School of Agriculture (ESACB), Portugal (10) Departamento de Agronomía, Universidad de Almería, Almería, Spain (11) Center for Research and Advanced Studies of the Nactional Polytechnic Institute, Mexico City, DF, Mexico (12) Centro Nacional de Supercomputacion, Department of Earth Sciences, Barcelona, Spain (13) Departamento de Ciencias de la Tierra, Universidad de Zaragoza, Zaragoza, Spain (14) Centro de Estudos de Recursos Naturais, Ambiente e Sociedade (CERNAS), Coimbra Agrarian Technical School, Polytechnic Institute of Coimbra, Coimbra, Portugal (15) Instituto de Agricultura Sostenible—CSIC, Córdoba, Spain (16) Grupo de Investigación GeoAmbiental (GIGA), Área de Geografía Física, Facultad de Filosofía y Letras. Universidad de Extremadura, Cáceres, Spain (17) Department of Waters, National Research Institute of Science and Technology for Environment and Agriculture, France (18) Department of Natural Resources Management and Agricultural Engineering, Agricultural University of Athens, Athens, Greece (19) Area of Physical Geography, Luis Vives Building, Luis de Ulloa Street, University of La Rioja, 26006 Logroño, Spain (20) Instituto Pirenaico de Ecología, IPE-CSIC, Zaragoza, Spain (21) Estación Experimental de Zonas Áridas, EEZA-CSIC, Almería, Spain (22) IRD, LISAH, Montpellier, France (23) Department of Agri-Food and Environmental Systems Management, University of Catania, Catania, Italy (24) Institute of Earth and Environmental Science, University of Potsdam, Potsdam, Germany (25) Center for Applied Geosciences. Faculty of Science, Eberhard Karls Universität Tübingen, Germany (26) Departamento de Geología y Geoquímica, Universidad Autónoma Madrid, Madrid, Spain (27) Departamento de Geografía, Universidad de Salamanca, Salamanca, Spain (28) Departamento de Geografía, Grupo de Investigación Geografía Física y Territorio—RNM279, Andalucía Tech, Universidad de Málaga, Málaga, Spain (29) Grup de Recerca Ambiental Mediterrània, Departamento de Geografia Física i AGR, Universitat de Barcelona, Spain (30) Facultad de Ciencias and Centro de Investigaciones Científicas Avanzadas (CICA), University of A Coruña, Campus de A Coruña, Spain (31) Departamento de Geografía, Universidad de Murcia, Murcia, Spain (32) French National Research Institut for Sustainable Development (IRD), CESBIO Laboratory, Toulouse, France. (33) Escuela Técnica Superior de Ingeniería Agronómica e I. de Montes, Departamento de Ingeniería Rural, Universidad de Córdoba, Córdoba, Spain (34) Departament of Environmental and Agricultural Sciences, Università degli Studi di Perugia, Perugia, Italy (35) Technical University of Crete, School of Environmental Engineering, Chania, Greece (36) Departamento de Geodinámica, Universidad del País Vasco UPV/EHU, Leioa, Spain (37) Geographical Institute, Research Centre of the Slovenian Academy of Sciences and Arts, Ljubljana, Slovenia Erosion processes and land degradation are recognized as one of the most significant environmental problems worldwide. In the Mediterranean region, intense erosion processes occur as a consequence of complex interactions between environmental conditions (e.g. climate, lithology) and human-related factors (e.g. history of human activity, land use changes) (García-Ruiz et al., 2013). Precipitation has been recognized as one of the main factors driving soil erosion. In climatology, one of the most common approaches in analyzing spatial and temporal precipitation variability is the circulation of weather types (WTs), which categorize the continuum of atmospheric circulation into a small number of classes or types. Flood generation and soil erosion are associated with specific weather conditions. Previous research in the Iberian Peninsula has analyzed the relationship between precipitation and specific WTs, demonstrating that specific WTs are the main drivers of precipitation and soil erosion in the different areas (Cortesi et al., 2014; Nadal-Romero et al., 2015). In this study, we present a preliminary analysis of WTs and runoff and soil erosion data from 50 study areas in the Mediterranean basin including different land uses. To do so,we have collected and jointed different research groups cross the Mediterranean Basin, and combined different databases (plots and small representative catchments) with the WT classification calculated using the NCEP/NCAR 40-Year Reanalysis Project. This pioneer research will be a valuable tool in understanding the relationships between weather types, precipitation and soil erosion dynamics. Acknowledgments Estela Nadal-Romero was the beneficiary of a "Ramón y Cajal" postdoctoral contract (Spanish Ministry of Economy and Competitiveness). José Andrés López-Tarazón is in receipt of a Marie Curie Intra-European Fellowship (Project ''Floodhazards'', PIEF-GA-2013-622468, Seventh EU Framework Programme). References Cortesi, N., González-Hidalgo, J.C., Trigo, R.M., Ramos, A.M., 2014. Weather types and spatial variability of precipitation in the Iberian Peninsula. International Journal of Climatology 34(8), 2661-2677. García-Ruiz, J.M., Nadal-Romero, E., Lana-Renault, N., Beguería, S., 2013. Erosion in Mediterranean landscapes: Changes and future challenges. Geomorphology 198, 20-36. Nadal-Romero, E., González-Hidalgo, J.C., Cortesi, N., Desir, G., Gómez, J.A., et al., 2015. Relationship of runoff, erosion and sediment yield to weather types in the Iberian Peninsula. Geomorphology 228, 372-381.

Short-term exposure to particulate matter induces arterial but not venous thrombosis in healthy mice.

PubMed

Emmerechts, J; Alfaro-Moreno, E; Vanaudenaerde, B M; Nemery, B; Hoylaerts, M F

2010-12-01

Epidemiological findings suggest an association between exposure to particulate matter (PM) and venous thrombo-embolism.   To investigate arterial vs. venous thrombosis, inflammation and coagulation in mice, (sub)acutely exposed to two types of PM. Various doses (25, 100 and 200 μg per animal) of urban particulate matter (UPM) or diesel exhaust particles (DEP) were intratracheally (i.t.) instilled in C57Bl6/n mice and several endpoints measured at 4, 10 and 24 h. Mice were also repeatedly exposed to 100 μg per animal on three consecutive days with endpoints measured 24 h after the last instillation. Exposure to 200 μg per mouse UPM enhanced arterial thrombosis, but neither UPM nor DEP significantly enhanced venous thrombosis. Both types of PM induced dose-dependent increases in broncho-alveolar lavage fluid (BALF) total cell numbers (mainly neutrophils) and cytokines (IL-6, KC, MCP-1, RANTES, MIP-1α), with peaks at 4 h and overall higher values for UPM than for DEP. Systemic inflammation was limited to increased serum IL-6 levels, 4 h after UPM. Both types of PM induced similar and dose-dependent but modest increases in factor (F)VII, FVIII and fibrinogen. Three repeated instillations did not or only modestly enhance the proinflammatory and procoagulant status. Compared with DEP, UPM induced more pronounced pulmonary inflammation, but both particle types triggered similar and mild short-term systemic effects. Hence, acute exposure to PM triggers activation of primary hemostasis in the mouse, but no substantial secondary hemostasis activation, resulting in arterial but not venous thrombogenicity. © 2010 International Society on Thrombosis and Haemostasis.

Community pharmacy-based research in Spain (1995-2005): A bibliometric study

PubMed Central

Andrés Iglesias, José Carlos; Andrés Rodríguez, N. Floro; Fornos Pérez, José Antonio

Only one study evaluated the scientific activity in community pharmacies in Spain, and it was restricted to articles published in just two journals. Objective To assess the scientific activity in community pharmacies in Spain through a bibliometric analysis of the original papers published during the years 1995-2005. Methods IPA, MEDLINE, CSIC database and the journals Seguimiento Farmacoterapéutico y Pharmaceutical Care España were used as data sources. Production indicators, consumption indicators and the impact factor (IF) as a repercussion index were analyzed. Results 122 articles were included in the review. The articles were published in 12 journals, 78.7% of them in Pharmaceutical Care España and Seguimiento Farmacoterapéutico. The mean number of authors per article was 4.2 (SD=2.1). The transitivity index was 71.3%. The total number of references cited in the articles was 2110. The mean number of references per article was 17.3 SD=9.3. The value of the insularity index was 57.6%. Self citation was 6.8% and the Price index was 66.5%. No impact factor was available for 6 journals. Conclusions Publication of articles on community pharmacy-based research in Spain has undergone an important increase in the last 5 years. The existence of authors who publish very few studies, the high insularity index and the lack of randomized, controlled trials may be considered as negative indicators in community pharmacy-based research in Spain. PMID:25214914

Oxidation of C/SiC Composites at Reduced Oxygen Partial Pressures

NASA Technical Reports Server (NTRS)

Opila, Elizabeth J.; Serra, Jessica

2009-01-01

Carbon-fiber reinforced SiC (C/SiC) composites are proposed for leading edge applications of hypersonic vehicles due to the superior strength of carbon fibers at high temperatures (greater than 1500 C). However, the vulnerability of the carbon fibers in C/SiC to oxidation over a wide range of temperatures remains a problem. Previous oxidation studies of C/SiC have mainly been conducted in air or oxygen, so that the oxidation behavior of C/SiC at reduced oxygen partial pressures of the hypersonic flight regime are less well understood. In this study, both carbon fibers and C/SiC composites were oxidized over a wide range of temperatures and oxygen partial pressures to facilitate the understanding and modeling of C/SiC oxidation kinetics for hypersonic flight conditions.

Differences in allergic inflammatory responses between urban PM2.5 and fine particle derived from desert-dust in murine lungs.

PubMed

He, Miao; Ichinose, Takamichi; Kobayashi, Makoto; Arashidani, Keiichi; Yoshida, Seiichi; Nishikawa, Masataka; Takano, Hirohisa; Sun, Guifan; Shibamoto, Takayuki

2016-04-15

The biological and chemical natures of materials adsorbed onto fine particulate matter (PM2.5) vary by origin and passage routes. The exacerbating effects of the two samples-urban PM2.5 (U-PM2.5) collected during the hazy weather in a Chinese city and fine particles (ASD-PM2.5) collected during Asian sand dust (ASD) storm event days in Japan-on murine lung eosinophilia were compared to clarify the role of toxic materials in PM2.5. The amounts of β-glucan and mineral components were higher in ASD-PM2.5 than in U-PM2.5. On the other hand, organic chemicals, including polycyclic aromatic hydrocarbons (PAHs), were higher in U-PM2.5 than in ASD-PM2.5. When BALB/c mice were intratracheally instilled with U-PM2.5 and ASD-PM2.5 (total 0.4 mg/mouse) with or without ovalbumin (OVA), various biological effects were observed, including enhancement of eosinophil recruitment induced by OVA in the submucosa of the airway, goblet cell proliferation in the bronchial epithelium, synergic increase of OVA-induced eosinophil-relevant cytokines and a chemokine in bronchoalveolar lavage fluid, and increase of serum OVA-specific IgG1 and IgE. Data demonstrate that U-PM2.5 and ASD-PM2.5 induced allergic inflammatory changes and caused lung pathology. U-PM2.5 and ASD-PM2.5 increased F4/80(+) CD11b(+) cells, indicating that an influx of inflammatory and exudative macrophages in lung tissue had occurred. The ratio of CD206 positive F4/80(+) CD11b(+) cells (M2 macrophages) in lung tissue was higher in the OVA+ASD-PM2.5 treated mice than in the OVA+U-PM2.5 treated mice. These results suggest that the lung eosinophilia exacerbated by both PM2.5 is due to activation of a Th2-associated immune response along with induced M2 macrophages and the exacerbating effect is greater in microbial element (β-glucan)-rich ASD-PM2.5 than in organic chemical-rich U-PM2.5. Copyright © 2016 Elsevier Inc. All rights reserved.

Differences in allergic inflammatory responses between urban PM2.5 and fine particle derived from desert-dust in murine lungs

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, Miao, E-mail: hemiao@mail.cmu.edu.cn; Department of Health Sciences, Oita University of Nursing and Health Sciences, Oita 870-1201; Ichinose, Takamichi, E-mail: ichinose@oita-nhs.ac.jp

The biological and chemical natures of materials adsorbed onto fine particulate matter (PM2.5) vary by origin and passage routes. The exacerbating effects of the two samples—urban PM2.5 (U-PM2.5) collected during the hazy weather in a Chinese city and fine particles (ASD-PM2.5) collected during Asian sand dust (ASD) storm event days in Japan—on murine lung eosinophilia were compared to clarify the role of toxic materials in PM2.5. The amounts of β-glucan and mineral components were higher in ASD-PM2.5 than in U-PM2.5. On the other hand, organic chemicals, including polycyclic aromatic hydrocarbons (PAHs), were higher in U-PM2.5 than in ASD-PM2.5. When BALB/cmore » mice were intratracheally instilled with U-PM2.5 and ASD-PM2.5 (total 0.4 mg/mouse) with or without ovalbumin (OVA), various biological effects were observed, including enhancement of eosinophil recruitment induced by OVA in the submucosa of the airway, goblet cell proliferation in the bronchial epithelium, synergic increase of OVA-induced eosinophil-relevant cytokines and a chemokine in bronchoalveolar lavage fluid, and increase of serum OVA-specific IgG1 and IgE. Data demonstrate that U-PM2.5 and ASD-PM2.5 induced allergic inflammatory changes and caused lung pathology. U-PM2.5 and ASD-PM2.5 increased F4/80{sup +} CD11b{sup +} cells, indicating that an influx of inflammatory and exudative macrophages in lung tissue had occurred. The ratio of CD206 positive F4/80{sup +} CD11b{sup +} cells (M2 macrophages) in lung tissue was higher in the OVA + ASD-PM2.5 treated mice than in the OVA + U-PM2.5 treated mice. These results suggest that the lung eosinophilia exacerbated by both PM2.5 is due to activation of a Th2-associated immune response along with induced M2 macrophages and the exacerbating effect is greater in microbial element (β-glucan)-rich ASD-PM2.5 than in organic chemical-rich U-PM2.5. - Highlights: • The aggravating effects of urban-PM2.5 and desert-PM2.5 on lung eosinophilia were compared. • Both PM2.5 enhanced Th2-immune response along with induced M2 macrophages. • The effect is greater in desert-PM2.5 than in organic chemical-rich urban-PM2.5. • Desert-PM2.5 may cause greater effects upon human respiratory health than urban-PM2.5.« less

On the interplay between Si(110) epilayer atomic roughness and subsequent 3C-SiC growth direction

NASA Astrophysics Data System (ADS)

Khazaka, Rami; Michaud, Jean-François; Vennéguès, Philippe; Nguyen, Luan; Alquier, Daniel; Portail, Marc

2016-11-01

In this contribution, we performed the growth of a 3C-SiC/Si/3C-SiC layer stack on a Si(001) substrate by means of chemical vapor deposition. We show that, by tuning the growth conditions, the 3C-SiC epilayer can be grown along either the [111] direction or the [110] direction. The key parameter for the growth of the desired 3C-SiC orientation on the Si(110)/3C-SiC(001)/Si(001) heterostructure is highlighted and is linked to the Si epilayer surface morphology. The epitaxial relation between the layers has been identified using X-ray diffraction and transmission electron microscopy (TEM). We showed that, regardless of the top 3C-SiC epilayer orientation, domains rotated by 90° around the growth direction are present in the epilayer. Furthermore, the difference between the two 3C-SiC orientations was investigated by means of high magnification TEM. The results indicate that the faceted Si(110) epilayer surface morphology results in a (110)-oriented 3C-SiC epilayer, whereas a flat hetero-interface has been observed between 3C-SiC(111) and Si(110). The control of the top 3C-SiC growth direction can be advantageous for the development of new micro-electro-mechanical systems.

CVD growth and properties of boron phosphide on 3C-SiC

NASA Astrophysics Data System (ADS)

Padavala, Balabalaji; Frye, C. D.; Wang, Xuejing; Raghothamachar, Balaji; Edgar, J. H.

2016-09-01

Improving the crystalline quality of boron phosphide (BP) is essential for realizing its full potential in semiconductor device applications. In this study, 3C-SiC was tested as a substrate for BP epitaxy. BP films were grown on 3C-SiC(100)/Si, 3C-SiC(111)/Si, and 3C-SiC(111)/4H-SiC(0001) substrates in a horizontal chemical vapor deposition (CVD) system. Films were produced with good crystalline orientation and morphological features in the temperature range of 1000-1200 °C using a PH3+B2H6+H2 mixture. Rotational twinning was absent in the BP due to the crystal symmetry-matching with 3C-SiC. Confocal 3D Raman imaging of BP films revealed primarily uniform peak shift and peak widths across the scanned area, except at defects on the surface. Synchrotron white beam X-ray topography showed the epitaxial relationship between BP and 3C-SiC was (100) 〈 011 〉 BP||(100) 〈 011 〉 3C-SiC and (111) 〈 11 2 ̅ 〉 BP||(111) 〈 11 2 ̅ 〉 3C-SiC. Scanning electron microscopy, Raman spectroscopy and X-ray diffraction analysis indicated residual tensile strain in the films and improved crystalline quality at temperatures below 1200 °C. These results indicated that BP properties could be further enhanced by employing high quality bulk 3C-SiC or 3C-SiC epilayers on 4H-SiC substrates.

CVD growth and properties of boron phosphide on 3C-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Padavala, Balabalaji; Frye, C. D.; Wang, Xuejing

Improving the crystalline quality of boron phosphide (BP) is essential for realizing its full potential in semiconductor device applications. In this study, 3C-SiC was tested as a substrate for BP epitaxy. BP films were grown on 3C-SiC(100)/Si, 3C-SiC(111)/Si, and 3C-SiC(111)/4H-SiC(0001) substrates in a horizontal chemical vapor deposition (CVD) system. Films were produced with good crystalline orientation and morphological features in the temperature range of 1000–1200 °C using a PH3+B2H6+H2 mixture. Rotational twinning was absent in the BP due to the crystal symmetry-matching with 3C-SiC. Confocal 3D Raman imaging of BP films revealed primarily uniform peak shift and peak widths acrossmore » the scanned area, except at defects on the surface. Synchrotron white beam X-ray topography showed the epitaxial relationship between BP and 3C-SiC was (100) <011>BP||(100) <011>3C-SiC and (111)View the MathML sourceBP||(111)View the MathML source3C-SiC. Scanning electron microscopy, Raman spectroscopy and X-ray diffraction analysis indicated residual tensile strain in the films and improved crystalline quality at temperatures below 1200 °C. These results indicated that BP properties could be further enhanced by employing high quality bulk 3C-SiC or 3C-SiC epilayers on 4H-SiC substrates.« less

The Histological Slides and Drawings of Cajal

PubMed Central

Garcia-Lopez, Pablo; Garcia-Marin, Virginia; Freire, Miguel

2009-01-01

Ramón y Cajal's studies in the field of neuroscience provoked a radical change in the course of its history. For this reason he is considered as the father of modern neuroscience. Some of his original preparations are housed at the Cajal Museum (Cajal Institute, CSIC, Madrid, Spain). In this article, we catalogue and analyse more than 4,500 of Cajal's histological preparations, the same preparations he used during his scientific career. Furthermore, we catalogued Cajal's original correspondence, both manuscripts and personal letters, drawings and plates. This is the first time anyone has compiled an account of Cajal's enormous scientific production, offering some curious insights into his work and his legacy. PMID:20339483

[Spain, New Spain and the autopsy of an anatomic malformation].

PubMed

de la Garza-Villaseñor, J Lorenzo; Pantoja-Millán, Juan Pablo

2008-01-01

Almost 250 years ago the autopsy of Agustin de Ahumada y Villalon was performed by Domingo Russi, Chief Surgeon at the Royal Hospital for Natives in Mexico City. This situation will be unimportant if the former wasn't the 42nd Viceroy of New Spain; his autopsy showed a situs inversus totalis, and probably this is the first scientific report of such malformation. For many years the report by Mathew Baillie (1761-1823) of an autopsy with the same findings as the first of its kind was believed, but actually the former almost three decades earlier was performed. In 1688 Jean M. Mery (1645-1722) at the Paris Academy of Medicine gave a talk reporting autopsy findings of the same malformations. Some aspects of the life of both personages are described, the autopsy report is showed and a short history about postmortem studies are mentioned mainly those made in Spain and New Spain. Through many centuries a very close relationship has been kept and medicine has not been the exception, in the field of human pathology in the middle third of the 20th century a distinguished pathologist, Dr. Isaac Costero-Tudanca, migrated to Mexico and gave flowering to pathology and a great generation of Mexican pathologists was generated headed by Dr. Ruy Perez-Tamayo.

Effects of Newcastle Disease Virus Strains AF2240 and V4-UPM on Cytolysis and Apoptosis of Leukemia Cell Lines

PubMed Central

Alabsi, Aied M.; Bakar, Siti Aishah Abu; Ali, Rola; Omar, Abdul Rahman; Bejo, Mohd Hair; Ideris, Aini; Ali, Abdul Manaf

2011-01-01

Newcastle disease virus (NDV) is used as an antineoplastic agent in clinical tumor therapy. It has prompted much interest as an anticancer agent because it can replicate up to 10,000 times better in human cancer cells than in most normal cells. This study was carried out to determine the oncolytic potential of NDV strain AF2240 and V4-UPM on WEHI-3B leukemia cell line. Results from MTT cytotoxicity assay showed that the CD50 values for both strains were 2 and 8 HAU for AF2240 and V4-UPM, respectively. In addition, bromodeoxyuridine (BrdU) and trypan blue dye exclusion assays showed inhibition in cell proliferation after different periods. Increase in the cellular level of caspase-3 and detection of DNA laddering using agarose gel electrophoresis on treated cells with NDV confirmed that the mode of cell death was apoptosis. In addition, flow-cytometry analysis of cellular DNA content showed that the virus caused an increase in the sub-G1 region (apoptosis peaks). In conclusion, NDV strains AF2240 and V4-UPM caused cytolytic effects against WEHI-3B leukemic cell line. PMID:22272097

[Epidemiology of falls in the elderly in Spain: a systematic review, 2007].

PubMed

Silva Gama, Zenewton André da; Gómez Conesa, Antonia; Sobral Ferreira, Marta

2008-01-01

Falls in the elderly are a serious problem that results in large health care expenditures. To prevent them, it has been shown that the key is an epidemiologic knowledge of the target population. The purpose of this systematic review was to identify the incidence, risk factors and consequences of falls in the Spanish population, by analyzing the methodological quality of studies that provide these data. Two independent authors identified 54 studies through manual and electronic means (MEDLINE, Dialnet, Tesis en Red, TESEO y CSIC [ICYT, IME, ISOC]). A total of 13 studies performed in Spain with non-hospitalized elderly individuals older than 64 years of age were selected and assessed for their methodological quality. We found heterogeneity in the characteristics and quality of the studies, and a general inadequacy of data analyses. The risk factors and consequences must be viewed with caution, since in most of the studies a causal inference cannot be made. We showed that the current fall rates are at the same level as those of the first epidemiologic study published 15 years ago. We conclude that Spain has a high incidence of falls and needs studies on risk factors directed toward cause and effect in the community and comparisons among nursing homes. Finally, the physical, psychosocial and economic consequences must be investigated more thoroughly.

CFD Growth of 3C-SiC on 4H/6H Mesas

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Trunek, Andrew J.; Spry, David J.; Powell, J. Anthony; Du, Hui; Skowronski, Marek; Huang, XianRong; Dudley, Michael

2006-01-01

This article describes growth and characterization of the highest quality reproducible 3C-SiC heteroepitaxial films ever reported. By properly nucleating 3C-SiC growth on top of perfectly on-axis (0001) 4H-SiC mesa surfaces completely free of atomic scale steps and extended defects, growth of 3C-SiC mesa heterofilms completely free of extended crystal defects can be achieved. In contrast, nucleation and growth of 3C-SiC mesa heterofilms on top of 4H-SiC mesas with atomic-scale steps always results in numerous observable dislocations threading through the 3C-SiC epilayer. High-resolution X-ray diffraction and transmission electron microscopy measurements indicate non-trivial in-plane lattice mismatch between the 3C and 4H layers. This mismatch is somewhat relieved in the step-free mesa case via misfit dislocations confined to the 3C/4H interfacial region without dislocations threading into the overlying 3C-SiC layer. These results indicate that the presence or absence of steps at the 3C/4H heteroepitaxial interface critically impacts the quality, defect structure, and relaxation mechanisms of single-crystal heteroepitaxial 3C-SiC films.

Controlling the optical properties of monocrystalline 3C-SiC heteroepitaxially grown on silicon at low temperatures

NASA Astrophysics Data System (ADS)

Colston, Gerard; Myronov, Maksym

2017-11-01

Cubic silicon carbide (3C-SiC) offers an alternative wide bandgap semiconductor to conventional materials such as hexagonal silicon carbide (4H-SiC) or gallium nitride (GaN) for the detection of UV light and can offer a closely lattice matched virtual substrate for subsequent GaN heteroepitaxy. As 3C-SiC can be heteroepitaxially grown on silicon (Si) substrates its optical properties can be manipulated by controlling the thickness and doping concentrations. The optical properties of 3C-SiC epilayers have been characterized by measuring the transmission of light through suspended membranes. Decreasing the thickness of the 3C-SiC epilayers is shown to shift the absorbance edge to lower wavelengths, a result of the indirect bandgap nature of silicon carbide. This property, among others, can be exploited to fabricate very low-cost, tuneable 3C-SiC based UV photodetectors. This study investigates the effect of thickness and doping concentration on the optical properties of 3C-SiC epilayers grown at low temperatures by a standard Si based growth process. The results demonstrate the potential photonic applications of 3C-SiC and its heterogeneous integration into the Si industry.

Project management for complex ground-based instruments: MEGARA plan

NASA Astrophysics Data System (ADS)

García-Vargas, María. Luisa; Pérez-Calpena, Ana; Gil de Paz, Armando; Gallego, Jesús; Carrasco, Esperanza; Cedazo, Raquel; Iglesias, Jorge

2014-08-01

The project management of complex instruments for ground-based large telescopes is a challenge itself. A good management is a clue for project success in terms of performance, schedule and budget. Being on time has become a strict requirement for two reasons: to assure the arrival at the telescope due to the pressure on demanding new instrumentation for this first world-class telescopes and to not fall in over-costs. The budget and cash-flow is not always the expected one and has to be properly handled from different administrative departments at the funding centers worldwide distributed. The complexity of the organizations, the technological and scientific return to the Consortium partners and the participation in the project of all kind of professional centers working in astronomical instrumentation: universities, research centers, small and large private companies, workshops and providers, etc. make the project management strategy, and the tools and procedures tuned to the project needs, crucial for success. MEGARA (Multi-Espectrógrafo en GTC de Alta Resolución para Astronomía) is a facility instrument of the 10.4m GTC (La Palma, Spain) working at optical wavelengths that provides both Integral-Field Unit (IFU) and Multi-Object Spectrograph (MOS) capabilities at resolutions in the range R=6,000-20,000. The project is an initiative led by Universidad Complutense de Madrid (Spain) in collaboration with INAOE (Mexico), IAA-CSIC (Spain) and Universidad Politécnica de Madrid (Spain). MEGARA is being developed under contract with GRANTECAN.

EMRS Spring Meeting 2014 Symposium D: Phonons and fluctuations in low dimensional structures

NASA Astrophysics Data System (ADS)

2014-11-01

The E-MRS 2014 Spring meeting, held from 26-30th May 2014 in Lille included the Symposium D entitled ''Phonons and Fluctuations in Low Dimensional Structures'', the first edition of its kind. The symposium was organised in response to the increasing interest in the study of phonons in the context of advances in condensed matter physics, electronics, experimental methods and theory and, in particular, the transfer of energy across atomic interfaces and the propagation of energy in the nm-scale. Steering heat by light or vice versa and examining nano-scale energy conversion (as in thermoelectricity and harvesting e.g. in biological systems) are two aspects that share the underlying science of energy processes across atomic interfaces and energy propagation in the nanoscale and or in confined systems. The nanometer scale defies several of the bulk relationships as confinement of electrons and phonons, locality and non-equilibrium become increasingly important. The propagation of phonons as energy carriers impacts not only heat transfer, but also the very concept and handling of temperature in non-equilibrium and highly localised conditions. Much of the needed progress depends on the materials studied and this symposium targeted the interface material aspects as well as the emerging concepts to advance in this field. The symposium had its origins in a series of meetings and seminars including: (1) the first Phonon Engineering Workshop, funded by Catalan Institute for Research and Advanced Studies (ICREA), the then MICINN, the CNRS, VTT, and several EU projects, held in Saint Feliu de Guixols (Girona, Spain) from 24th to 27th of May 2010 with 65 participants from Europe, the USA and Japan; (2) the first Phonons and Fluctuations workshop, held in Paris on 8th and 9th November 2010, supported by French, Spanish and Finnish national projects and EU projects, attended by about 50 researchers; (3) the second Phonon and Fluctuations workshop, held in Paris on 8th and 9th September 2011, attended by 55 researchers and (4) the 3rd Workshop on Phonons & Fluctuations, held in Saint Feliux de Guixols (Girona, Spain) during 21 to 24th May 2012 attended by 65 participants from Europe and the USA. These papers in this proceeding are examples of the work presented at the symposium. They represent the tip of the iceberg, as the symposium attracted over 100 abstracts. The meeting room was usually full with an audience varying between 40 and 100 participants. The plenary presentation was given by Prof. Gang Chen (MIT) on ''Ballistic and Coherent Phonon Heat Conduction in Bulk Materials and Nanostructures'', which was warmly welcome by an eager and highly motivated audience. The invited speakers were: Prof. Thomas Dehoux (U. Bordeaux), Dr S. Chung (U. New South Wales, Australia), Prof. A. Goni (CSIC-ICMAB), Prof. Giuliano Benenti (U. Insubria), Dr. Davide Donadio (Max Planck Institute for Polymer Research, Mainz), Prof. George Fytas (University of Crete), Prof. Dr. Tobias Kippenberg (EPFL, Switzerland), Prof. Bernard Perrin (INSP, Paris), Prof. Gyaneshwar P. Srivastava, U. Exeter) and Prof. Dr. Achim Kittel (U. Oldenburg). The organisers are very grateful to them for supporting the symposium and sharing their latest research results with the symposium participants. The symposium organisers recognised the participation of students and awarded prizes to the two Best Student Presentations, which went to Valeria Lacatena (IEMN, Lille) with an invited presentation entitled ''Efficient reduction of thermal conductivity in silicon using phononic-engineered membranes'' and to Yan Qing Liu (Institute Neel, Grenoble) who presented the talk entitled ''Sensitive 3-omega measurements of epitaxial thermoelectric thin films''. The poster session had about fifty posters and the four best poster prizes went to: Konstanze Hahn et al. (U. Cagliari) poster title ''Determination of Thermal conductivity in (nanostructured) SiGe materials'', Florian Doehring et al. (U. Goettingen) poster title ''Phonon blocking in Multilayers produced by Pulsed Laser Deposition'', Jordi Gomis-Bresco et al. (ICN2) poster '' A 1D PhoXonic Crystal'', Barcelona and Benjamin J Robinson et al. (U. Lancaster) poster ''Scanning Thermal microscopy studies of 2D materials''. The symposium organisers are grateful to the Scientific Committee members, Prof. Bahram Djafari-Rouhani (France), Prof. Dr. Thomas Dekorsy (Germany), Prof. Anthony Kent (UK), Prof. Fabio Marchesoni (Italy), Dr. Natalio Mingo (France), Prof. Pascal Ruello, (France) and Prof. Javier Viejo-Rodriguez (Spain), for their help with all aspects of evaluation of the scientific level of the presentations in the symposium. The symposium was sponsored by the FP7 ICT FET Open Coordination Action EUPHONON (GA. 612086) and by the CNRS GDR ''Thermal Nanosciences and NanoEngineering''. The symposium organisers express their sincere thanks to the staff of the E-MRS for continuous support and timely advice in all organisational aspects. We are indebted to Dr. Erwan Guillotel (ICN2) for his assistance with the organisation of the symposium.

Preformulation and Vaginal Film Formulation Development of Microbicide Drug Candidate CSIC for HIV prevention

PubMed Central

Gong, Tiantian; Zhang, Wei; Parniak, Michael A.; Graebing, Phillip W.; Moncla, Bernard; Gupta, Phalguni; Empey, Kerry M.; Rohan, Lisa C.

2017-01-01

Purpose 5-chloro-3-[phenylsulfonyl] indole-2-carboxamide (CSIC) is a highly potent non-nucleoside reverse transcriptase inhibitor (NNRTI) of HIV-1 which has been shown to have a more desirable resistance profile than other NNRTIs in development as HIV prevention strategies. This work involves generation of preformulation data for CSIC and systematic development of a cosolvent system to effectively solubilize this hydrophobic drug candidate. This system was then applied to produce a polymeric thin film solid dosage form for vaginal administration of CSIC for use in prevention of sexual acquisition of HIV. Methods Extensive preformulation, formulation development, and film characterization studies were conducted. An HPLC method was developed for CSIC quantification. Preformulation tests included solubility, crystal properties, stability, and drug-excipient compatibility. Cytotoxicity was evaluated using both human epithelial and mouse macrophage cell lines. Ternary phase diagram methodology was used to identify a cosolvent system for CSIC solubility enhancement. Following preformulation evaluation, a CSIC film formulation was developed and manufactured using solvent casting technique. The developed film product was assessed for physicochemical properties, anti-HIV bioactivity, and Lactobacillus biocompatibility during 12-month stability testing period. Results Preformulation studies showed CSIC to be very stable. Due to its hydrophobicity, a cosolvent system consisting of polyethylene glycol 400, propylene glycol, and glycerin (5:2:1, w/w/w) was developed, which provided a uniform dispersion of CSIC in the film formulation. The final film product met target specifications established for vaginal microbicide application. Conclusions The hydrophobic drug candidate CSIC was successfully formulated with high loading capacity in a vaginal film by means of a cosolvent system. The developed cosolvent strategy is applicable for incorporation of other hydrophobic drug candidates in the film platform. PMID:28983328

Preformulation and Vaginal Film Formulation Development of Microbicide Drug Candidate CSIC for HIV prevention.

PubMed

Gong, Tiantian; Zhang, Wei; Parniak, Michael A; Graebing, Phillip W; Moncla, Bernard; Gupta, Phalguni; Empey, Kerry M; Rohan, Lisa C

2017-06-01

5-chloro-3-[phenylsulfonyl] indole-2-carboxamide (CSIC) is a highly potent non-nucleoside reverse transcriptase inhibitor (NNRTI) of HIV-1 which has been shown to have a more desirable resistance profile than other NNRTIs in development as HIV prevention strategies. This work involves generation of preformulation data for CSIC and systematic development of a cosolvent system to effectively solubilize this hydrophobic drug candidate. This system was then applied to produce a polymeric thin film solid dosage form for vaginal administration of CSIC for use in prevention of sexual acquisition of HIV. Extensive preformulation, formulation development, and film characterization studies were conducted. An HPLC method was developed for CSIC quantification. Preformulation tests included solubility, crystal properties, stability, and drug-excipient compatibility. Cytotoxicity was evaluated using both human epithelial and mouse macrophage cell lines. Ternary phase diagram methodology was used to identify a cosolvent system for CSIC solubility enhancement. Following preformulation evaluation, a CSIC film formulation was developed and manufactured using solvent casting technique. The developed film product was assessed for physicochemical properties, anti-HIV bioactivity, and Lactobacillus biocompatibility during 12-month stability testing period. Preformulation studies showed CSIC to be very stable. Due to its hydrophobicity, a cosolvent system consisting of polyethylene glycol 400, propylene glycol, and glycerin (5:2:1, w/w/w ) was developed, which provided a uniform dispersion of CSIC in the film formulation. The final film product met target specifications established for vaginal microbicide application. The hydrophobic drug candidate CSIC was successfully formulated with high loading capacity in a vaginal film by means of a cosolvent system. The developed cosolvent strategy is applicable for incorporation of other hydrophobic drug candidates in the film platform.

Mathematical Techniques for System Realization and Identification.

DTIC Science & Technology

1986-02-26

OZGULER, P. KHARGCNEKAR, J. RIBERA , and T. GEORGIOU. Also supported was the Principal Investigator (partial sumier support only) and various short-term...1982] "Skew-primeness in the regulator problem with internal stability", Ph.D. dissertation, University of Florida, 63 pages. J. RIBERA [1982...Research Institute, Kocaeli, TURKEY) Dr. J. Ribera , doctoral student (now on faculty of I. E. S. E., Barcelona, SPAIN) Dr. A. Tannenbaum, Visiting

Performance and technical commissioning of an ultra-stable cooling system for a mid-range cryogenic astrophysical instrument (CARMENES-NIR)

NASA Astrophysics Data System (ADS)

Becerril, S.; Mirabet, E.; Lizon, J. L.; Calvo, R.; Abril, M.; Cárdenas, C.; Ferro, I.; Morales, R.; Pérez, D.; Ramón, A.; Sánchez-Carrasco, M. A.; Quirrenbach, A.; Amado, P.; Ribas, I.; Reiners, A.; Caballero, J. A.; Seifert, W.; Herranz, J.

2017-12-01

CARMENES is the new high-resolution high-stability spectrograph built for the 3.5m telescope at the Calar Alto Observatory (CAHA, Almería, Spain) by a consortium formed by German and Spanish institutions. This instrument is composed of two separate spectrographs, VIS channel (550-1050 nm) and NIR channel (900-1700 nm). The Instituto de Astrofísica de Andalucía, IAA-CSIC was responsible for the NIR-channel spectrograph. This was installed at the telescope by the end of 2015, technical commissioning and final tuning of the instrument being extended up to fall 2016. In that sense, one of the most challenging systems in the instrument involves the cooling system of the NIR channel. It is a key system within the stability budget and was entirely under the control of the IAA-CSIC. That development has been possible thanks to a very fruitful collaboration with ESO (Jean-Louis Lizon). The present work describes the performance of the CARMENES-NIR cooling system, mainly focusing on the extremely high thermal stability -on the order of few cK-around the working temperature (138K), as well as the main events and upgrades achieved during commissioning. As a result of its performance, CARMENES-NIR is a cornerstone within the field of astrophysical instrumentation and, in particular, related to discovery of earth-like exoplanets.

Defect-Induced Nucleation and Epitaxy: A New Strategy toward the Rational Synthesis of WZ-GaN/3C-SiC Core-Shell Heterostructures.

PubMed

Liu, Baodan; Yang, Bing; Yuan, Fang; Liu, Qingyun; Shi, Dan; Jiang, Chunhai; Zhang, Jinsong; Staedler, Thorsten; Jiang, Xin

2015-12-09

In this work, we demonstrate a new strategy to create WZ-GaN/3C-SiC heterostructure nanowires, which feature controllable morphologies. The latter is realized by exploiting the stacking faults in 3C-SiC as preferential nucleation sites for the growth of WZ-GaN. Initially, cubic SiC nanowires with an average diameter of ∼100 nm, which display periodic stacking fault sections, are synthesized in a chemical vapor deposition (CVD) process to serve as the core of the heterostructure. Subsequently, hexagonal wurtzite-type GaN shells with different shapes are grown on the surface of 3C-SiC wire core. In this context, it is possible to obtain two types of WZ-GaN/3C-SiC heterostructure nanowires by means of carefully controlling the corresponding CVD reactions. Here, the stacking faults, initially formed in 3C-SiC nanowires, play a key role in guiding the epitaxial growth of WZ-GaN as they represent surface areas of the 3C-SiC nanowires that feature a higher surface energy. A dedicated structural analysis of the interfacial region by means of high-resolution transmission electron microscopy (HRTEM) revealed that the disordering of the atom arrangements in the SiC defect area promotes a lattice-matching with respect to the WZ-GaN phase, which results in a preferential nucleation. All WZ-GaN crystal domains exhibit an epitaxial growth on 3C-SiC featuring a crystallographic relationship of [12̅10](WZ-GaN) //[011̅](3C-SiC), (0001)(WZ-GaN)//(111)(3C-SiC), and d(WZ-GaN(0001)) ≈ 2d(3C-SiC(111)). The approach to utilize structural defects of a nanowire core to induce a preferential nucleation of foreign shells generally opens up a number of opportunities for the epitaxial growth of a wide range of semiconductor nanostructures which are otherwise impossible to acquire. Consequently, this concept possesses tremendous potential for the applications of semiconductor heterostructures in various fields such as optics, electrics, electronics, and photocatalysis for energy harvesting and environment processing.

Greatly improved 3C-SiC p-n junction diodes grown by chemical vapor deposition

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Larkin, David J.; Starr, Jonathan E.; Powell, J. A.; Salupo, Carl S.; Matus, Lawrence G.

1993-01-01

This paper reports the fabrication and initial electrical characterization of greatly improved 3C-SiC (beta-SiC) p-n junction diodes. These diodes, which were grown on commercially available 6H-SiC substrates by chemical vapor deposition, demonstrate rectification to -200 V at room temperature, representing a fourfold improvement in reported 3C-SiC diode blocking voltage. The reverse leakage currents and saturation current densities measured on these diodes also show significant improvement compared to previously reported 3C-SiC p-n junction diodes. When placed under sufficient forward bias, the diodes emit significantly bright green-yellow light. These results should lead to substantial advancements in 3C-SiC transistor performance.

Electrical impedance spectroscopy of neutron-irradiated nanocrystalline silicon carbide (3C-SiC)

NASA Astrophysics Data System (ADS)

Huseynov, Elchin M.

2018-01-01

It the present work, impedance spectra of nanocrystalline 3C-SiC particles have been comparatively analyzed before and after neutron irradiation. Resonance states and shifts were observed at the impedance spectra of nanocrystalline 3C-SiC particles after neutron irradiation. Relaxation time has been calculated from interdependence of real and imaginary parts of impedance of nanocrystalline 3C-SiC particles. Calculated relaxation times have been investigated as a function of neutron irradiation period. Neutron transmutation (31P isotopes production) effects on the impedance spectra and relaxation times have been studied. Moreover, influence of agglomeration and amorphous transformation to the impedance spectra and relaxation times of nanocrystalline 3C-SiC particles have been investigated.

Stellar Occultations in the Coma of Comet 67/P Chuyumov-Gerasimenko Observed by the OSIRIS Camera System

NASA Astrophysics Data System (ADS)

Moissl, Richard; Kueppers, Michael

2016-10-01

In this paper we present the results of an analysis on a large part of the existing Image data from the OSIRIS camera system onboard the Rosetta Spacecraft, in which stars of sufficient brightness (down to a limiting magnitude of 6) have been observed through the coma of Comet 67/P Churyumov-Gerasimenko ("C-G"). Over the course of the Rosetta main mission the Coma of the comet underwent large changes in density and structure, owed to the changing insolation along the orbit of C-G. We report on the changes of the stellar signals in the wavelength ranges, covered by the filters of the OSIRIS Narrow-Angle (NAC) and Wide-Angle (WAC) cameras.Acknowledgements: OSIRIS was built by a consortium led by the Max-Planck-Institut für Sonnensystemforschung, Göttingen, Germany, in collaboration with CISAS, University of Padova, Italy, the Laboratoire d'Astrophysique de Marseille, France, the Instituto de Astrofísica de Andalucia, CSIC, Granada, Spain, the Scientific Support Office of the European Space Agency, Noordwijk, The Netherlands, the Instituto Nacional de Técnica Aeroespacial, Madrid, Spain, the Universidad Politéchnica de Madrid, Spain, the Department of Physics and Astronomy of Uppsala University, Sweden, and the Institut für Datentechnik und Kommunikationsnetze der Technischen Universität Braunschweig, Germany.

Piezo-Hall effect and fundamental piezo-Hall coefficients of single crystal n-type 3C-SiC(100) with low carrier concentration

NASA Astrophysics Data System (ADS)

Qamar, Afzaal; Dao, Dzung Viet; Dinh, Toan; Iacopi, Alan; Walker, Glenn; Phan, Hoang-Phuong; Hold, Leonie; Dimitrijev, Sima

2017-04-01

This article reports the results on the piezo-Hall effect in single crystal n-type 3C-SiC(100) having a low carrier concentration. The effect of the crystallographic orientation on the piezo-Hall effect has been investigated by applying stress to the Hall devices fabricated in different crystallographic directions. Single crystal n-type 3C-SiC(100) and 3C-SiC(111) were grown by low pressure chemical vapor deposition at 1250 °C. Fundamental piezo-Hall coefficients were obtained using the piezo-Hall effect measurements as P11 = (-29 ± 1.3) × 10-11 Pa-1, P12 = (11.06 ± 0.5)× 10-11 Pa-1, and P44 = (-3.4 ± 0.7) × 10-11 Pa-1. It has been observed that the piezo-Hall coefficients of n-type 3C-SiC(100) show a completely different behavior as compared to that of p-type 3C-SiC.

Open top culverts as an alternative drainage system to minimize ecological effects in earth roads.

NASA Astrophysics Data System (ADS)

García, Jose L.; Elorrieta, Jose; Robredo, Jose C.; García, Ricardo; García, Fernando; Gimenez, Martin C.

2013-04-01

During the last fifteen years a research team from School of Forestry at the Technical University of Madrid (Spain) has developed several competitive research projects regarding forest roads and open top culverts. A first approach was established with a prototype of 7 meters length in a hydraulic channel at the laboratory determining main parameters of different open top culverts in relation to different sizes of gravels and the self washing properties relationship with different slopes up to 8 %. The curves obtained may help to properly install these drainage systems avoiding maintenance costs. In addition more targeted pilot studies were developed in different forest earth roads in center and north Spain. The construction of the stations under study was financed by the U.P.M and the R&D National Plan. The main outcomes relates the low variation of humidity in a 20 m. wide range at both sides of the open top culverts and several considerations relating the angle of installation, the spacing of such drainage systems and the benefits against rilling along the roads. Also the erosion produced downhill was established and some construction methods to avoid adverse ecological effects. The diffusion of results includes congresses and a small booklet with a great acceptance in forestry services. Also a patent (ES 2 262 437) of an advanced model has been registered.

Advance Appropriations for Veteran’s Health Care: Issues and Options for Congress

DTIC Science & Technology

2009-04-28

care system. Utilization Projection Model (UPM) The UPM is based on the Milliman Health Cost Guidelines ( HCGs ), a proprietary set of utilization-rate...benchmarks derived from commercial data.31 The HCGs contain data on utilization for 37 of the 58 EHCPM health service categories. Milliman applies a...complex set of adjustments to the HCG data to reflect the health status of VA enrollees, their reliance on VA, and the relative efficiency of VA

Modelling runoff and soil water content with the DR2-2013© SAGA v1.1 model at catchment scale under Mediterranean conditions (NE Spain)

NASA Astrophysics Data System (ADS)

López-Vicente, Manuel, , Dr.; Palazón, M. Sc. Leticia; Quijano, M. Sc. Laura; Gaspar, Leticia, , Dr.; Navas, Ana, , Dr.

2015-04-01

Hydrological and soil erosion models allow mapping and quantifying spatially distributed rates of runoff depth and soil redistribution for different land uses, management and tillage practices and climatic scenarios. The different temporal and spatial [very small (< 1 km2), small (1-5 km2), medium (5-50 km2) and large catchments (50-1000 km2) or river basins (>1000 km2)] scales of numerical simulations make model selection specific to each range of scales. Additionally, the spatial resolution of the inputs is in agreement with the size of the study area. In this study, we run the GIS-based water balance DR2-2013© SAGA v1.1 model (freely downloaded as executable file at http://digital.csic.es/handle/10261/93543), in the Vandunchil stream catchment (23 km2; Ebro river basin, NE Spain). All input maps are generated at 5 x 5 m of cell size (924,573 pixels per map) allowing sound parameterization. Simulation is run at monthly scale with average climatic values. This catchment is an open hydrological system and it has a long history of human occupation, agricultural practices and water management. Numerous manmade infrastructures or landscape linear elements (LLEs: paved and unpaved trails, rock mounds in non-cultivated areas, disperse and small settlements, shallow and long drainage ditches, stone walls, small rock dams, fences and vegetation strips) appear throughout the hillslopes and streams and modify the natural runoff pathways and thus the hydrological and sediment connectivity. Rain-fed cereal fields occupy one third of the catchment area, 1% corresponds to sealed soils, and the remaining area is covered with Mediterranean forest, scrubland, pine afforestation and meadow. The parent material corresponds to Miocene sandstones and lutites and Holocene colluvial and alluvial deposits. The climate is continental Mediterranean with two humid periods, one in spring and a second in autumn that summarizes 63% of the total annual precipitation. We created a synthetic weather station (WS) from the Caseda and Uncastillo WS. The effective rainfall that reaches the soils (after canopy interception and slope correction) was 85% on average from the total rainfall depth (556 mm yr-1) and the average initial runoff, before overland flow processes, was 320 mm yr-1. The simulated effective runoff (CQeff) ranged from 0 until 29,960 mm yr-1 and the corresponding map showed the typical spatial pattern of overland flow pathways though numerous disruptions appeared along the hillslopes and the main streams due to the presence of LLEs. The total depth of annual runoff corresponds to 37.8% of the total effective rainfall (TER) and 32.0% of the total rainfall depth (TR). The remaining volume of water, the soil water content (Waa) associated with the runoff and rainfall events, meant 62.2% and 52.7% of the TER and TR, respectively. The map of the Waa presented a different spatial pattern where the land uses play a more important role than the processes of cumulative overland flow. Significant variations in the monthly values of CQeff and Waa were described. This study proves the ability of the DR2-2013© SAGA v1.1 model to simulate the hydrological response of the soils at catchment scale.

Optimal arrangement of magnetic coils for functional magnetic stimulation of the inspiratory muscles in dogs.

PubMed

Lin, Vernon Weh-Hau; Zhu, Ercheng; Sasse, Scott A; Sassoon, Catherine; Hsiao, Ian N

2005-12-01

In an attempt to maximize inspiratory pressure and volume, the optimal position of a single or of dual magnetic coils during functional magnetic stimulation (FMS) of the inspiratory muscles was evaluated in twenty-three dogs. Unilateral phrenic magnetic stimulation (UPMS) or bilateral phrenic magnetic stimulation (BPMS), posterior cervical magnetic stimulation (PCMS), anterior cervical magnetic stimulation (ACMS) as well as a combination of PCMS and ACMS were performed. Trans-diaphragmatic pressure (Pdi), flow, and lung volume changes with an open airway were measured. Transdiaphragmatic pressure was also measured with an occluded airway. Changes in inspiratory parameters during FMS were compared with 1) electrical stimulation of surgically exposed bilateral phrenic nerves (BPES) and 2) ventral root electrical stimulation at C5-C7 (VRES C5-C7). Relative to the Pdi generated by BPES of 36.3 +/- 4.5 cm H2O (Mean +/- SEM), occluded Pdi(s) produced by UPMS, BPMS, PCMS, ACMS, and a combined PCMS + ACMS were 51.7%, 61.5%, 22.4%, 100.3%, and 104.5% of the maximal Pdi, respectively. Pdi(s) produced by UPMS, BPMS, PCMS, ACMS, and combined ACMS + PCMS were 38.0%, 45.2%, 16.5%, 73.8%, and 76.8%, respectively, of the Pdi induced by VRES (C5-C7) (48.0 +/- 3.9 cm H2O). The maximal Pdi(s) generated during ACMS and combined PCMS + ACMS were higher than the maximal Pdi(s) generated during UPMS, BPMS, or PCMS (p < 0.05). ACMS alone induced 129.8% of the inspiratory flow (73.0 +/- 9.4 L/ min) and 77.5% of the volume (626 +/- 556 ml) induced by BPES. ACMS and combined PCMS + ACMS produce a greater inspiratory pressure than UPMS, BPMS or PCMS. ACMS can be used to generate sufficient inspiratory pressure, flow, and volume for activation of the inspiratory muscles.

Chemotherapy of Leishmaniasis.

DTIC Science & Technology

1978-12-01

differential centrifugation. Rabbit blood agar slopes are seeded with a drop of the resultant amastigote suspension, 200 units/ml penicillin and 2 0pg/ml...visceral 644 220 Hendricks Man cutaneous 645 219 Man India visceral 646 234 Dog Spain cutaneous? 647 648 LN1 58 Murray Man Panama cutaneous 649 WR168...Calcutta School of Tropical Medicine, India 52 Dr. J. P. Farrell, Rutgers State University, New Jersey, USA 53 Dr. L. Hendricks , Walter Reed Army Institute

Simulation of Degraded Properties of 2D plain Woven C/SiC Composites under Preloading Oxidation Atmosphere

NASA Astrophysics Data System (ADS)

Chen, Xihui; Sun, Zhigang; Sun, Jianfen; Song, Yingdong

2017-12-01

In this paper, a numerical model which incorporates the oxidation damage model and the finite element model of 2D plain woven composites is presented for simulation of the oxidation behaviors of 2D plain woven C/SiC composite under preloading oxidation atmosphere. The equal proportional reduction method is firstly proposed to calculate the residual moduli and strength of unidirectional C/SiC composite. The multi-scale method is developed to simulate the residual elastic moduli and strength of 2D plain woven C/SiC composite. The multi-scale method is able to accurately predict the residual elastic modulus and strength of the composite. Besides, the simulated residual elastic moduli and strength of 2D plain woven C/SiC composites under preloading oxidation atmosphere show good agreements with experimental results. Furthermore, the preload, oxidation time, temperature and fiber volume fractions of the composite are investigated to show their influences upon the residual elastic modulus and strength of 2D plain woven C/SiC composites.

Non-destructive testing of satellite nozzles made of carbon fibre ceramic matrix composite, C/SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rebelo Kornmeier, J.; Hofmann, M.; Schmidt, S.

Carbon fibre ceramic matrix composite materials, C/SiC, are excellent candidates as lightweight structural materials for high performance hot structures such as in aerospace applications. Satellite nozzles are manufactured from C/SiC, using, for instance, the Liquid Polymer Infiltration (LPI) process. In this article the applicability of different non-destructive analysis methods for the characterisation of C/SiC components will be discussed. By using synchrotron and neutron tomography it is possible to characterise the C/SiC material in each desired location or orientation. Synchrotron radiation using tomography on small samples with a resolution of 1.4 {mu}m, i.e. the fibre scale, was used to characterise threemore » dimensionally fibre orientation and integrity, matrix homogeneity and dimensions and distributions of micro pores. Neutron radiation tomography with a resolution of about 300 {mu}m was used to analyse the over-all C/SiC satellite nozzle component with respect to the fibre content. The special solder connection of a C/SiC satellite nozzle to a metallic ring was also successfully analysed by neutron tomography. In addition, the residual stress state of a temperature tested satellite nozzle was analysed non-destructively in depth by neutron diffraction. The results revealed almost zero stress for the principal directions, radial, axial and tangential, which can be considered to be the principal directions.« less

Preparation, characterisation and viability of encapsulated Trichoderma harzianum UPM40 in alginate-montmorillonite clay.

PubMed

Adzmi, Fariz; Meon, Sariah; Musa, Mohamed Hanafi; Yusuf, Nor Azah

2012-01-01

Microencapsulation is a process by which tiny parcels of an active ingredient are packaged within a second material for the purpose of shielding the active ingredient from the surrounding environment. This study aims to determine the ability of the microencapsulation technique to improve the viability of Trichoderma harzianum UPM40 originally isolated from healthy groundnut roots as effective biological control agents (BCAs). Alginate was used as the carrier for controlled release, and montmorillonite clay (MMT) served as the filler. The encapsulated Ca-alginate-MMT beads were characterised using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The FTIR results showed the interaction between the functional groups of alginate and MMT in the Ca-alginate-MMT beads. Peaks at 1595, 1420 and 1020 cm(-1) characterised alginate, and peaks at 1028 and 453 cm(-1) characterised MMT; both sets of peaks appeared in the Ca-alginate-MMT FTIR spectrum. The TGA analysis showed an improvement in the thermal stability of the Ca-alginate-MMT beads compared with the alginate beads alone. SEM analysis revealed a homogeneous distribution of the MMT particles throughout the alginate matrix. T. harzianum UPM40 was successfully encapsulated in the Ca-alginate-MMT beads. Storage analysis of the encapsulated T. harzianum UPM40 showed that the low storage temperature of 5°C resulted in significantly (p < 0.05) better storage compared with room temperature (30°C).

Trace elements study of high purity nanocrystalline silicon carbide (3C-SiC) using k0-INAA method

NASA Astrophysics Data System (ADS)

Huseynov, Elchin; Jazbec, Anze

2017-07-01

Silicon carbide (3C-SiC) nanoparticles have been irradiated by neutron flux (2×1013 n·cm-2·s-1) at TRIGA Mark II type research reactor. After neutron irradiation, the radioisotopes of trace elements in the nanocrystalline 3C-SiC were studied as time functions. The identification of isotopes which significantly increased the activity of the samples as a result of neutron radiation was carried out. Nanocrystalline 3C-SiC are synthesized by standard laser technique and the purity of samples was determined by the k0-based Instrumental Neutron Activation Analysis (k0-INAA) method. Trace elements concentration in the 3C-SiC nanoparticles were determined by the radionuclides of appropriate elements. The trace element isotopes concentration have been calculated in percentage according to k0-INAA method.

Project Based Learning experiences in the space engineering education at Technical University of Madrid

NASA Astrophysics Data System (ADS)

Rodríguez, Jacobo; Laverón-Simavilla, Ana; del Cura, Juan M.; Ezquerro, José M.; Lapuerta, Victoria; Cordero-Gracia, Marta

2015-10-01

This work describes the innovation activities performed in the field of space education since the academic year 2009/10 at the Technical University of Madrid (UPM), in collaboration with the Spanish User Support and Operations Center (E-USOC), the center assigned by the European Space Agency (ESA) in Spain to support the operations of scientific experiments on board the International Space Station. These activities have been integrated within the last year of the UPM Aerospace Engineering degree. A laboratory has been created, where students have to validate and integrate the subsystems of a microsatellite using demonstrator satellites. In parallel, the students participate in a Project Based Learning (PBL) training process in which they work in groups to develop the conceptual design of a space mission. One student in each group takes the role of project manager, another one is responsible for the mission design and the rest are each responsible for the design of one of the satellite subsystems. A ground station has also been set up with the help of students developing their final thesis, which will allow future students to perform training sessions and learn how to communicate with satellites, how to receive telemetry and how to process the data. Several surveys have been conducted along two academic years to evaluate the impact of these techniques in engineering learning. The surveys evaluate the acquisition of specific and generic competences, as well as the students' degree of satisfaction with respect to the use of these learning methodologies. The results of the surveys and the perception of the lecturers show that PBL encourages students' motivation and improves their results. They not only acquire better technical training, but also improve their transversal skills. It is also pointed out that this methodology requires more dedication from lecturers than traditional methods.

Stimuli Responsive Amphiphilic Assemblies

DTIC Science & Technology

2013-11-18

Enzyme- Sensitive, Amphiphilic- Dendrimer -Based Nanoparticles through Photochemical Crosslinking, Chemistry - A European Journal, (10 2011): 0. doi...17, 2012 (Organizers: R. P. Singh) 8th International Dendrimer Symposium (IDS-8), Madrid, Spain, June 23-27, 2013 (Organizers: Dr. M’Angeles

Thermo-mechanical performance of precision C/SiC mounts

NASA Astrophysics Data System (ADS)

Goodman, William A.; Mueller, Claus E.; Jacoby, Marc T.; Wells, Jim D.

2001-12-01

For complex shaped, lightweight, high precision opto- mechanical structures that must operate in adverse environments and over wide ranges of temperature, we consider IABG's optical grade silicon carbide composite ceramic (C/SiC) as the material of choice. C/SiC employs conventional NC machining/milling equipment to rapidly fabricate near-net shape parts, providing substantial schedule, cost, and risk savings for high precision components. Unlike powder based SiC ceramics, C/SiC does not experience significant shrinkage during processing, nor does it suffer from incomplete densification. If required, e.g. for large-size components, a fully-monolithic ceramic joining technique can be applied. Generally, the thermal and mechanical properties of C/SiC are tunable in certain ranges by modifying certain process steps. This paper focuses on the thermo-mechanical performance of new, high precision mounts designed by Schafer Corporation and manufactured by IABG. The mounts were manufactured using standard optical grade C/SiC (formulation internally called A-3). The A-3 formulation has a near-perfect CTE match with silicon, making it the ideal material to athermally support Schafer produced Silicon Lightweight Mirrors (SLMs) that will operate in a cryogenic environment. Corresponding thermo- mechanical testing and analysis is presented in this manuscript.

Structural Integrity Of Low-Velocity Impacted C/SIC Ceramic Matrix Composites

NASA Astrophysics Data System (ADS)

Knoche, R.; Drose, A.

2012-07-01

Carbon fibre reinforced silicon carbide (C/SiC) ceramic matrix composites (CMC) are most favourable for thermal protection systems & hot structures in re-entry vehicles since they offer superior heat resistance, high specific strength as well as a low coefficient of temperature expansion (CTE). To ensure the structural integrity of these C/SiC structures and thus mission safety all potential degradation effects during manufacturing and lifetime have to be considered. One of the most probable defects which may harm the structural integrity significantly can be caused by low-velocity impacts (LVI) which may occur during transportation and integration by e.g. dropping of tools. Thus the present study focuses on the residual mechanical and thermo-mechanical performance of C/SiC composites after being exposed to a low-velocity impact in terms of initial and residual mechanical performance, changes in microstructure, as well as thermo-mechanical performance through exposing specimens to multiple experimentally simulated re-entries. The results reveal the impact characteristics and damage mechanisms of C/SiC CMC exposed to a low-velocity impact and evidence the functional reliability as well as the damage tolerance of the C/SiC material investigated.

Corrigendum.

PubMed

2018-01-01

Arenillas JF, Cortijo E, García-Bermejo P, et al. Relative cerebral blood volume is associated with collateral status and infarct growth in stroke patients in SWIFT PRIME. J Cereb Blood Flow Metab. Epub ahead of print 1 January 2017. DOI: 10.1177/0271678X17740293 . This article was published online with the sixth author, David Liebeskind (Neurovascular Imaging Research Core, Department of Neurology, UCLA, USA), omitted. The full list and order of authors on the article is as follows: Juan F Arenillas, Elisa Cortijo, Pablo García-Bermejo, Elad I Levy, Reza Jahan, David Liebeskind, Mayank Goyal, Jeffrey L Saver and Gregory W Albers Juan F Arenillas's affiliation should have read Neurovascular Research i3 Laboratory, Instituto de Biología y Genética Molecular, Consejo Superior de Investigaciones Científicas (CSIC), Universidad de Valladolid, Valladolid, Spain.

Alleviation of Nitrogen and Sulfur Deficiency and Enhancement of Photosynthesis in Arabidopsis thaliana by Overexpression of Uroporphyrinogen III Methyltransferase (UPM1)

PubMed Central

Garai, Sampurna; Tripathy, Baishnab C.

2018-01-01

Siroheme, an iron-containing tetrapyrrole, is the prosthetic group of nitrite reductase (NiR) and sulfite reductase (SiR); it is synthesized from uroporphyrinogen III, an intermediate of chlorophyll biosynthesis, and is required for nitrogen (N) and sulfur (S) assimilation. Further, uroporphyrinogen III methyltransferase (UPM1), responsible for two methylation reactions to form dihydrosirohydrochlorin, diverts uroporphyrinogen III from the chlorophyll biosynthesis pathway toward siroheme synthesis. AtUPM1 [At5g40850] was used to produce both sense and antisense plants of Arabidopsis thaliana in order to modulate siroheme biosynthesis. In our experiments, overexpression of AtUPM1 signaled higher NiR (NII) and SiR gene and gene product expression. Increased NII expression was found to regulate and enhance the transcript and protein abundance of nitrate reductase (NR). We suggest that elevated NiR, NR, and SiR expression must have contributed to the increased synthesis of S containing amino acids in AtUPM1overexpressors, observed in our studies. We note that due to higher N and S assimilation in these plants, total protein content had increased in these plants. Consequently, chlorophyll biosynthesis increased in these sense plants. Higher chlorophyll and protein content of plants upregulated photosynthetic electron transport and carbon assimilation in the sense plants. Further, we have observed increased plant biomass in these plants, and this must have been due to increased N, S, and C assimilation. On the other hand, in the antisense plants, the transcript abundance, and protein content of NiR, and SiR was shown to decrease, resulting in reduced total protein and chlorophyll content. This led to a decrease in photosynthetic electron transport rate, carbon assimilation and plant biomass in these antisense plants. Under nitrogen or sulfur starvation conditions, the overexpressors had higher protein content and photosynthetic electron transport rate than the wild type (WT). Conversely, the antisense plants had lower protein content and photosynthetic efficiency in N-deficient environment. Our results clearly demonstrate that upregulation of siroheme biosynthesis leads to increased nitrogen and sulfur assimilation, and this imparts tolerance to nitrogen and sulfur deficiency in Arabidopsis thaliana plants. PMID:29472934

Theoretical investigation of Lamb wave characteristics in AlN/3C-SiC composite membranes

NASA Astrophysics Data System (ADS)

Lin, Chih-Ming; Chen, Yung-Yu; Pisano, Albert P.

2010-11-01

Cubic silicon carbide (3C-SiC) layer can provide advantages of high frequency and high quality factor for Lamb wave devices due to the superior properties of high acoustic velocity and low acoustic loss. In this study, Lamb wave propagation characteristics in composite membranes consisting of a c-axis oriented aluminum nitride (AlN) film and an epitaxial 3C-SiC (100) layer are investigated by theoretical calculation. The lowest symmetric mode Lamb wave propagating along the [011] direction exhibits a phase velocity higher than 10 000 m/s and an electromechanical coupling coefficient above 2% in the AlN/3C-SiC multilayered membranes.

Characterization of 3C-SiC Films Grown on 4H- and 6H-SiC Substrate Mesas During Step-Free Surface Heteroepitaxy

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Powel J. Anthony; Spry, David J.; Trunek, Andrew J.; Huang, Xianrong; Vetter, William M.; Dudley, Michael; Skowronski, Marek; Liu, Jinqiang

2002-01-01

This paper reports detailed structural characterization of 3C-SiC heteroepitaxial films grown on 4H- and 6H-SiC mesa surfaces. 3C-SiC heterofilms grown by the "step-free surface heteroepitaxy" process, free of double-positioning boundary (DPB) and stacking-fault (SF) defects, were compared to less-optimized 3C-SiC heterofilms using High Resolution X-ray Diffraction (HRXRD), High Resolution Cross-sectional Transmission Electron Microscopy (HRXTEM), molten potassium hydroxide (KOH) etching, and dry thermal oxidation. The results suggest that step free surface heteroepitaxy enables remarkably benign partial lattice mismatch strain relief during heterofilm growth.

Finite-Element Modeling of 3C-SiC Membranes

NASA Technical Reports Server (NTRS)

DeAnna, R. G.; Mitchell, J.; Zorman, C. A.; Mehregany, M.

2000-01-01

Finite-element modeling (FEM) of 3C-SiC thin-film membranes on Si substrates was used to determine the residual stress and center deflection with applied pressure. The anisotropic, three-dimensional model includes the entire 3C-SiC membrane and Si substrate with appropriate material properties and boundary conditions. Residual stress due to the thermal-expansion-coefficient mismatch between the3C-SiC film and Si substrate was included in the model. Both before-and after-etching, residual stresses were calculated. In-plane membrane stress and normal deflection with applied pressure were also calculated. FEM results predict a tensile residual stress fo 259 MPa in the 3C-SiC membrane before etching. This decreases to 247 MPa after etching the substrate below the membrane. The residual stress experimentally measured on sample made at Case Western Reserve University was 280 MPa on post-etched membranes. This is excellent agreement when an additional 30-40 MPa of residual stress to account for lattice mismatch is added to the FEM results.

Growth of Defect-Free 3C-SiC on 4H- and 6H-SiC Mesas Using Step-Free Surface Heteroepitaxy

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Powell, J. Anthony; Trunek, Andrew J.; Huang, Xianrong R.; Dudley, Michael

2001-01-01

A new growth process, herein named step-free surface heteroepitaxy, has achieved 3CSiC films completely free of double positioning boundaries and stacking faults on 4H-SiC and 6H-SiC substrate mesas. The process is based upon the initial 2-dimensional nucleation and lateral expansion of a single island of 3C-SiC on a 4H- or 6H-SiC mesa surface that is completely free of bilayer surface steps. Our experimental results indicate that substrate-epilayer in-plane lattice mismatch (delta a/a = 0.0854% for 3C/4H) is at least partially relieved parallel to the interface in the initial bilayers of the heterofilm, producing an at least partially relaxed 3C-SiC film without dislocations that undesirably thread through the thickness of the epilayer. This result should enable realization of improved 3C-SiC devices.

Amorphization of nanocrystalline 3C-SiC irradiated with Si+ ions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Weilin; Wang, H.; Zhang, Yanwen

2010-01-01

Irradiation induced amorphization in nanocrystalline and single crystal 3C-SiC has been studied using 1 MeV Si+ ions under identical irradiation conditions at room temperature and 400 K. The disordering behavior has been characterized using in-situ ion channeling and ex-situ x-ray diffraction methods. The results show that, compared to single crystal 3C-SiC, full amorphization of small 3C-SiC grains (~3.8 nm in size) at room temperature occurs at a slightly lower dose. Grain size decreases with increasing dose until a fully amorphized state is attained. The amorphization dose increases at 400 K relative to room temperature. However, at 400 K, the dosemore » for amorphization for 2.0 nm grains is about a factor of 4 and 8 smaller than for 3.0 nm grains and bulk single crystal 3C-SiC, respectively. The behavior is attributed to the dominance of defect-stimulated interfacial amorphization.« less

In Situ Strength Model for Continuous Fibers and Multi-Scale Modeling the Fracture of C/SiC Composites

NASA Astrophysics Data System (ADS)

Zhang, Sheng; Gao, Xiguang; Song, Yingdong

2018-04-01

A new in situ strength model of carbon fibers was developed based on the distribution of defects to predict the stress-strain response and the strength of C/SiC composites. Different levels of defects in the fibers were considered in this model. The defects in the fibers were classified by their effects on the strength of the fiber. The strength of each defect and the probability that the defect appears were obtained from the tensile test of single fibers. The strength model of carbon fibers was combined with the shear-lag model to predict the stress-strain responses and the strengths of fiber bundles and C/SiC minicomposites. To verify the strength model, tensile tests were performed on fiber bundles and C/SiC minicomposites. The predicted and experimental results were in good agreement. Effects of the fiber length, the fiber number and the heat treatment on the final strengths of fiber bundles and C/SiC minicomposites were also discussed.

Monotonic, Creep-Rupture, and Fatigue Behavior of Carbon Fiber Reinforced Silicon Carbide (C/SiC) at an Elevated Temperature

DTIC Science & Technology

2004-03-01

elevated temperature of 550 C. Cyclic loading of C/SiC was investigated at frequencies of 375 Hz , 10 Hz, 1 Hz, and 0.1 Hz. Creep-Rupture tests and tests that...is reduced when frequency of fatigue is increased. At high frequency fatigue (10Hz to 375 Hz ), C/SiC composites have longer cycle lives and time lives

Glycerol-bonded 3C-SiC nanocrystal solid films exhibiting broad and stable violet to blue-green emission.

PubMed

Wang, J; Xiong, S J; Wu, X L; Li, T H; Chu, Paul K

2010-04-14

We have produced glycerol-bonded 3C-SiC nanocrystal (NC) films, which when excited by photons of different wavelengths, produce strong and tunable violet to blue-green (360-540 nm) emission as a result of the quantum confinement effects rendered by the 3C-SiC NCs. The emission is so intense that the emission spots are visible to the naked eyes. The light emission is very stable and even after storing in air for more than six months, no intensity degradation can be observed. X-ray photoelectron spectroscopy and absorption fine structure measurements indicate that the Si-terminated NC surfaces are completely bonded to glycerol molecules. Calculations of geometry optimization and electron structures based on the density functional theory for 3C-SiC NCs with attached glycerol molecules show that these molecules are bonded on the NCs causing strong surface structural change, while the isolated levels in the conduction band of the bare 3C-SiC NCs are replaced with quasi-continuous bands that provide continuous tunability of the emitted light by changing the frequencies of exciting laser. As an application, we demonstrate the potential of using 3C-SiC NCs to fabricate full-color emitting solid films by incorporating porous silicon.

Neoclassical theory inside transport barriers in tokamaks

NASA Astrophysics Data System (ADS)

Shaing, K. C.; Hsu, C. T.

2012-02-01

Inside the transport barriers in tokamaks, ion energy losses sometimes are smaller than the value predicted by the standard neoclassical theory. This improvement can be understood in terms of the orbit squeezing theory in addition to the sonic poloidal E ×B Mach number Up,m that pushes the tips of the trapped particles to the higher energy. In general, Up,m also includes the poloidal component of the parallel mass flow speed. These physics mechanisms are the corner stones for the transition theory of the low confinement mode (L-mode) to the high confinement mode (H-mode) in tokamaks. Here, detailed transport fluxes in the banana regime are presented using the parallel viscous forces calculated earlier. It is found, as expected, that effects of orbit squeezing and the sonic Up,m reduce the ion heat conductivity. The former reduces it by a factor of |S|3/2 and the later by a factor of R(Up ,m2)exp(-Up ,m2) with R(Up ,m2), a rational function. Here, S is the orbit squeezing factor.

Genomic Diversity in the Endosymbiotic Bacterium Rhizobium leguminosarum.

PubMed

Sánchez-Cañizares, Carmen; Jorrín, Beatriz; Durán, David; Nadendla, Suvarna; Albareda, Marta; Rubio-Sanz, Laura; Lanza, Mónica; González-Guerrero, Manuel; Prieto, Rosa Isabel; Brito, Belén; Giglio, Michelle G; Rey, Luis; Ruiz-Argüeso, Tomás; Palacios, José M; Imperial, Juan

2018-01-24

Rhizobium leguminosarum bv. viciae is a soil α-proteobacterium that establishes a diazotrophic symbiosis with different legumes of the Fabeae tribe. The number of genome sequences from rhizobial strains available in public databases is constantly increasing, although complete, fully annotated genome structures from rhizobial genomes are scarce. In this work, we report and analyse the complete genome of R. leguminosarum bv. viciae UPM791. Whole genome sequencing can provide new insights into the genetic features contributing to symbiotically relevant processes such as bacterial adaptation to the rhizosphere, mechanisms for efficient competition with other bacteria, and the ability to establish a complex signalling dialogue with legumes, to enter the root without triggering plant defenses, and, ultimately, to fix nitrogen within the host. Comparison of the complete genome sequences of two strains of R. leguminosarum bv. viciae , 3841 and UPM791, highlights the existence of different symbiotic plasmids and a common core chromosome. Specific genomic traits, such as plasmid content or a distinctive regulation, define differential physiological capabilities of these endosymbionts. Among them, strain UPM791 presents unique adaptations for recycling the hydrogen generated in the nitrogen fixation process.

COMMITTEES: LISA 7 Science Organizing Committee and Local Organizing Committee LISA 7 Science Organizing Committee and Local Organizing Committee

NASA Astrophysics Data System (ADS)

2009-05-01

Science Organising Committee (SOC) Pierre Binetruy, APC - College de France Massimo Cerdonio, University of Padova Karsten Danzmann, AEI/University of Hannover Mike Cruise, University of Birmingham Jim Hough, University of Glasgow Oliver Jennrich, ESTEC Philippe Jetzer, University Zurich Alberto Lobo (Chair), ICE-CSIC and IEEC Yannick Mellier, IAP, Paris Bernard Schutz, AEI Potsdam Tim Sumner, Imperial College, London Jean-Yves Vinet, OCA, Nice Stefano Vitale, University of Trento Peter Bender, University of Colorado Sasha Buchman, Stanford University Joan Centrella, NASA/Goddard Neil Cornish, Montana State University Curt Cutler, NASA/JPL Sam Finn, Penn State University Jens Gundlach, NPL Craig Hogan, University of Washington Scott Hughes, MIT Piero Madau, Lick Observatory Tom Prince, NASA/JPL Sterl Phinney, Caltech Doug Richstone, University of Michigan Tuck Stebbins, NASA/Goddard Kip Thorne, Caltech Roger Blandford, Stanford University Eugenio Coccia, University of Roma-2 Carlos F Sopuerta,ICE-CSIC and IEEC Enrique Garcia-Berro, Universitat Politècnica de Catalunya, Barcelona Seiji Kawamura, National Observatory, Japan Jay Marx, LIGO Laboratory Stephen Merkowitz, NASA/Goddard Benoit Mours, Laboratoire d'Annec Gijs Nelemans, IMAPP, Nijmegen Enric Verdaguer, University of Barcelona Clifford M Will, Washington University, St Louis Local Organising Committee (LOC) Anna Bertolín (IEEC) Priscilla Cañizares (ICE-CSIC and IEEC) Carlos F Sopuerta (ICE-CSIC and IEEC) Ivan Lloro (ICE-CSIC and IEEC),Chair Alberto Lobo (ICE-CSIC and IEEC) Nacho Mateos (ICE-CSIC and IEEC) Pilar Montes (IEEC) Miquel Nofrarias (IEEC) Juan Ramos-Castro (Universitat Politècnica de Catalunya) Josep Sanjuán (IEEC)

Vaginal Microbicide Film Combinations of Two Reverse Transcriptase Inhibitors, EFdA and CSIC, for the Prevention of HIV-1 Sexual Transmission.

PubMed

Zhang, Wei; Hu, Minlu; Shi, Yuan; Gong, Tiantian; Dezzutti, Charlene S; Moncla, Bernard; Sarafianos, Stefan G; Parniak, Michael A; Rohan, Lisa C

2015-09-01

EFdA is a potent nucleoside reverse transcriptase inhibitor (NRTI) with activity against a wide spectrum of wild-type and drug resistant HIV-1 variants. CSIC is a tight-binding non-nucleoside reverse transcriptase inhibitor (NNRTI) with demonstrated anti-HIV properties important for use in topical prevention of HIV transmission. The objective of this study was to develop and characterize film-formulated EFdA and CSIC for use as a female-controlled vaginal microbicide to prevent sexual transmission of HIV. Assessments of EFdA- and CSIC-loaded films included physicochemical characteristics, in vitro cytotoxicity, epithelia integrity studies, compatibility with the normal vaginal Lactobacillus flora and anti-HIV bioactivity evaluations. No significant change in physicochemical properties or biological activity of the combination films were noted during 3 months storage. In vitro cytotoxicity and bioactivity testing showed that 50% cytotoxic concentration (CC50) of either EFdA or CSIC was several orders of magnitude higher than the 50% effective concentration (EC50) values. Film-formulated EFdA and CSIC combination showed additive inhibitory activity against wild type and drug-resistant variants of HIV. Epithelial integrity studies demonstrated that the combination vaginal film had a much lower toxicity to HEC-1A monolayers compared to that of VCF®, a commercial vaginal film product containing nonoxynol-9. Polarized ectocervical explants showed films with drug alone or in combination were effective at preventing HIV infection. Our data suggest that vaginal microbicide films containing a combination of the NRTI EFdA and the NNRTI CSIC have potential to prevent HIV-1 sexual transmission.

COMUNICA Project: a commitment for strategic communication on Earth Sciences

NASA Astrophysics Data System (ADS)

Cortes-Picas, Jordi; Diaz, Jordi; Fernandez-Turiel, Jose-Luis

2016-04-01

The Institute of Earth Sciences Jaume Almera (ICTJA-CSIC) has just celebrated its 50-year anniversary last year. It is a reference research center on Earth Sciences both national and international level. The Institute includes 4 research groups which focus their scientific activity on the structure and dynamics of the Earth, the environmental changes in the geological record, geophysical and geochemical modelling and crystallography and optical properties. Only when large geological disasters happens, mainly earthquakes and volcanic eruptions, some interaction between ICTJA-CSIC researchers and traditional media occurs, which is limited by the fact that the aim of the Institute is the scientific research and it has no responsibilities in the area of civil protection. This relationship reduces the knowledge of our activity to the general public. To overcome this situation, the ICTJA-CSIC has decided to take an active role in the social dissemination of geological and geophysical knowledge. Thus, the ICTJA-CSIC has launched the COMUNICA Project. The project is aimed to increase the social visibility of the ICTJA-CSIC and to promote the outreach of researchers. Therefore ICTJA-CSIC has created the Communication Unit, which is in charge of designing communication strategies to give to different audiences (media, students of secondary and higher education, general public) an overview of the scientific and institutional activity of the ICTJA-CSIC. A global communication plan is being designed to define the strategic actions, both internal and external. An important role has been reserved for digital channels, to promote ICTJA-CSIC activity on social networks such as Twitter, Facebook or Youtube, besides making a major effort in the renovation and maintenance of the corporate website. A strong effort will be done to collect and spread through press releases the major scientific milestones achieved by the researchers, to promote the interest of mass media. Communication plan includes also institutional participation in scientific dissemination events, talks addressed to general public, and workshops and seminars for students of secondary and higher education.

Spain to Join ESO

NASA Astrophysics Data System (ADS)

2006-03-01

On 13 February, at a ceremony in Madrid, an agreement was signed by the Spanish Minister of Education and Science, Mrs. María Jesús San Segundo, and the ESO Director General, Dr. Catherine Cesarsky, affirming their commitment to securing Spanish membership of ESO.

New Physical Constraints for Multi-Frame Blind Deconvolution

DTIC Science & Technology

2014-12-10

Laboratory) Dr. Julian Christou (Large Binocular Telescope Observatory) REAL ACADEMIA DE CIENCIAS Y ARTES DE BARCELONA RAMBLA DE LOS ESTUDIOS 115... CIENCIAS Y ARTES DE BARCELONA RAMBLA DE LOS ESTUDIOS 115 BARCELONA, 08002 SPAIN 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING

Vaginal microbicide film combinations of two reverse transcriptase inhibitors, EFdA and CSIC, for the prevention of HIV-1 sexual transmission

PubMed Central

Zhang, Wei; Hu, Minlu; Shi, Yuan; Gong, Tiantian; Dezzutti, Charlene S.; Moncla, Bernard; Sarafianos, Stefan G.; Parniak, Michael A.; Rohan, Lisa C.

2015-01-01

Purpose EFdA is a potent nucleoside reverse transcriptase inhibitor (NRTI) with activity against a wide spectrum of wild-type and drug resistant HIV-1 variants. CSIC is a tight-binding non-nucleoside reverse transcriptase inhibitor (NNRTI) with demonstrated anti-HIV properties important for use in topical prevention of HIV transmission. The objective of this study was to develop and characterize film-formulated EFdA and CSIC for use as a female-controlled vaginal microbicide to prevent sexual transmission of HIV. Methods Assessments of EFdA- and CSIC-loaded films included physicochemical characteristics, in vitro cytotoxicity, epithelia integrity studies, compatibility with the normal vaginal Lactobacillus flora and anti-HIV bioactivity evaluations. Results No significant change in physicochemical properties or biological activity of the combination films were noted during 3 months storage. In vitro cytotoxicity and bioactivity testing showed that 50% cytotoxic concentration (CC50) of either EFdA or CSIC was several orders of magnitude higher than the 50% effective concentration (EC50) values. Film-formulated EFdA and CSIC combination showed additive inhibitory activity against wild type and drug-resistant variants of HIV. Epithelial integrity studies demonstrated that the combination vaginal film had a much lower toxicity to HEC-1A monolayers compared to that of VCF®, a commercial vaginal film product containing nonoxynol-9. Polarized ectocervical explants showed films with drug alone or in combination were effective at preventing HIV infection. Conclusions Our data suggest that vaginal microbicide films containing a combination of the NRTI EFdA and the NNRTI CSIC have potential to prevent HIV-1 sexual transmission. PMID:25794967

Growth and Characterization of 3C-SiC and 2H-AIN/GaN Films and Devices Produced on Step-Free 4H-SiC Mesa Substrates

NASA Technical Reports Server (NTRS)

Neudeck, P. G.; Du, H.; Skowronski, M.; Spry, D. J.; Trunek, A. J.

2007-01-01

While previously published experimental results have shown that the step-free (0 0 0 1) 4H-SiC mesa growth surface uniquely enables radical improvement of 3C-SiC and 2H-AlN/GaN heteroepitaxial film quality (greater than 100-fold reduction in extended defect densities), important aspects of the step-free mesa heterofilm growth processes and resulting electronic device benefits remain to be more fully elucidated. This paper reviews and updates recent ongoing studies of 3C-SiC and 2H-AlN/GaN heteroepilayers grown on top of 4H-SiC mesas. For both 3C-SiC and AlN/GaN films nucleated on 4H-SiC mesas rendered completely free of atomic-scale surface steps, TEM studies reveal that relaxation of heterofilm strain arising from in-plane film/substrate lattice constant mismatch occurs in a remarkably benign manner that avoids formation of threading dislocations in the heteroepilayer. In particular, relaxation appears to occur via nucleation and inward lateral glide of near-interfacial dislocation half-loops from the mesa sidewalls. Preliminary studies of homojunction diodes implemented in 3C-SiC and AlN/GaN heterolayers demonstrate improved electrical performance compared with much more defective heterofilms grown on neighbouring stepped 4H-SiC mesas. Recombination-enhanced dislocation motion known to degrade forward-biased 4H-SiC bipolar diodes has been completely absent from our initial studies of 3C-SiC diodes, including diodes implemented on defective 3C-SiC heterolayers grown on stepped 4H-SiC mesas.

Effect of Environment on the Stress- Rupture Behavior of a C/SiC Composite Studied

NASA Technical Reports Server (NTRS)

Verrilli, Michael J.; Kiser, J. Douglas; Opila, Elizabeth J.; Calomino, Anthony M.

2002-01-01

Advanced reusable launch vehicles will likely incorporate fiber-reinforced ceramic matrix composites (CMC's) in critical propulsion and airframe components. The use of CMC's is highly desirable to save weight, improve reuse capability, and increase performance. One of the candidate CMC materials is carbon-fiber-reinforced silicon carbide (C/SiC). In potential propulsion applications, such as turbopump rotors and nozzle exit ramps, C/SiC components will be subjected to a service cycle that includes mechanical loading under complex, high-pressure environments containing hydrogen, oxygen, and steam. Degradation of both the C fibers and the SiC matrix are possible in these environments. The objective of this effort was to evaluate the mechanical behavior of C/SiC in various environments relevant to reusable launch vehicle applications. Stress-rupture testing was conducted at the NASA Glenn Research Center on C/SiC specimens in air and steam-containing environments. Also, the oxidation kinetics of the carbon fibers that reinforce the composite were monitored by thermogravimetric analysis in the same environments and temperatures used for the stress-rupture tests of the C/SiC composite specimens. The stress-rupture lives obtained for C/SiC tested in air and in steam/argon mixtures are shown in the following bar chart. As is typical for most materials, lives obtained at the lower temperature (600 C) are longer than for the higher temperature (1200 C). The effect of environment was most pronounced at the lower temperature, where the average test duration in steam at 600 C was at least 30 times longer than the lives obtained in air. The 1200 C data revealed little difference between the lives of specimens tested in air and steam at atmospheric pressure.

On New Spain and Mexican medicinal botany in cardiology.

PubMed

de Micheli-Serra, Alfredo Alessandro; Izaguirre-Ávila, Raúl

2014-01-01

Towards the middle of the XVI century, the empirical physician Martín de la Cruz, in New Spain, compiled a catalogue of the local medicinal herbs and plants, which was translated into Latin by Juan Badiano, professor at the Franciscan college of Tlatelolco. On his side, Dr. Francisco Hernández, the royal physician (protomédico) from 1571 until 1577, performed a systematic study of the flora and fauna in this period. His notes and designs were not published at that time, but two epitomes of Hernández' works appeared, respectively, in 1615 in Mexico and in 1651 in Rome. During the XVIII century, two Spanish scientific expeditions arrived to these lands. They were led, respectively, by the Spanish naturalist Martín Sessé and the Italian seaman, Alessandro Malaspina di Mulazzo, dependent from the Spanish Government. These expeditions collected and carried rich scientific material to Spain. At the end of that century, the Franciscan friar Juan Navarro depicted and described several Mexican medicinal plants in the fifth volume of his botanic work. In the last years of the colonial period, the fundamental works of Humboldt and Bonpland on the geographic distribution of the American plants were published. In the modern age, the first research about the Mexican medicinal botany was performed in the laboratory of the Instituto Médico Nacional [National Medical Institute] under the leadership of Dr. Fernando Altamirano, who started pharmacological studies in this country. Later, trials of cardiovascular pharmacology were performed in the small laboratories of the cardiological unit at the General Hospital of Mexico City, on Dr. Ignacio Chávez' initiative. The Mexican botanical-pharmacological tradition persists alive and vigorous at the Instituto Nacional de Cardiología and other scientific institutions of the country.

Growth of cubic silicon carbide on oxide using polysilicon as a seed layer for micro-electro-mechanical machine applications

NASA Astrophysics Data System (ADS)

Frewin, C. L.; Locke, C.; Wang, J.; Spagnol, P.; Saddow, S. E.

2009-08-01

The growth of highly oriented 3C-SiC directly on an oxide release layer, composed of a 20-nm-thick poly-Si seed layer and a 550-nm-thick thermally deposited oxide on a (1 1 1)Si substrate, was investigated as an alternative to using silicon-on-insulator (SOI) substrates for freestanding SiC films for MEMS applications. The resulting SiC film was characterized by X-ray diffraction (XRD) with the X-ray rocking curve of the (1 1 1) diffraction peak displaying a FWHM of 0.115° (414″), which was better than that for 3C-SiC films grown directly on (1 1 1)Si during the same deposition process. However, the XRD peak amplitude for the 3C-SiC film on the poly-Si seed layer was much less than for the (1 1 1)Si control substrate, due to slight in-plane misorientations in the film. Surprisingly, the film was solely composed of (1 1 1) 3C-SiC grains and possessed no 3C-SiC grains oriented along the <3 1 1> and <1 1 0> directions which were the original directions of the poly-Si seed layer. With this new process, MEMS structures such as cantilevers and membranes can be easily released leaving behind high-quality 3C-SiC structures.

Turning the undesired voids in silicon into a tool: In-situ fabrication of free-standing 3C-SiC membranes

NASA Astrophysics Data System (ADS)

Khazaka, Rami; Michaud, Jean François; Vennéguès, Philippe; Alquier, Daniel; Portail, Marc

2017-02-01

In this contribution, we present a method to form free-standing cubic silicon carbide (3C-SiC) membranes in-situ during the growth stage. To do so, we exploit the presence of voids in the silicon (Si) epilayer underneath the 3C-SiC membrane, in stark contrast to the conventional view of voids as defects. The shape and the size of the 3C-SiC membranes can be controlled by a preceding patterning step of the Si epilayer. Afterwards, by controlling the expansion of voids in Si, the structured sacrificial layer is consumed during the 3C-SiC growth step. Consequently, the membranes are grown and released simultaneously in a single step process. This straightforward technique is expected to markedly simplify the fabrication process of membranes by reducing the fabrication duration and cost. Furthermore, it helps to overcome several technical issues and presents the cornerstone for micro and nano-electromechanical systems applications, profiting from the outstanding properties of cubic silicon carbide.

Fundamental piezo-Hall coefficients of single crystal p-type 3C-SiC for arbitrary crystallographic orientation

NASA Astrophysics Data System (ADS)

Qamar, Afzaal; Dao, Dzung Viet; Phan, Hoang-Phuong; Dinh, Toan; Dimitrijev, Sima

2016-08-01

Piezo-Hall effect in a single crystal p-type 3C-SiC, grown by LPCVD process, has been characterized for various crystallographic orientations. The quantified values of the piezo-Hall effect in heavily doped p-type 3C-SiC(100) and 3C-SiC(111) for different crystallographic orientations were used to obtain the fundamental piezo-Hall coefficients, P 12 = ( 5.3 ± 0.4 ) × 10 - 11 Pa - 1 , P 11 = ( - 2.6 ± 0.6 ) × 10 - 11 Pa - 1 , and P 44 = ( 11.42 ± 0.6 ) × 10 - 11 Pa - 1 . Unlike the piezoresistive effect, the piezo-Hall effect for (100) and (111) planes is found to be independent of the angle of rotation of the device within the crystal plane. The values of fundamental piezo-Hall coefficients obtained in this study can be used to predict the piezo-Hall coefficients in any crystal orientation which is very important for designing of 3C-SiC Hall sensors to minimize the piezo-Hall effect for stable magnetic field sensitivity.

Eduardo Primo Yúfera, founder of Revista de Agroquímica y Tecnología de Alimentos and pioneer on food science and technology research in Spain.

PubMed

Ayala-Gascón, M; Aleixandre-Benavent, R; Gandía-Balaguer, A

2011-12-01

Eduardo Primo Yúfera was the founder and director of the Instituto de Agroquímica y Tecnología de Alimentos (IATA, 1957-1974) until he was appointed president of the Consejo Superior de Investigaciones Científicas (CSIC). His aim to publicize food science led him to create the Revista de Agroquímica y Tecnología de Alimentos in 1961, the forerunner of this journal, Food Science and Technology International, which he directed until 1977. Of his scientific output, 50% has been published in this journal. He is considered to be the promoter and exponent of Food Science and Technology and Chemical Ecology in Spain as well as the instigator of the country's innovation model (R&D and innovation). In his work, he was able to combine basic research excellence and socially relevant applied research to move both science and society forward. He was an example and inspiration to many colleagues and followers. The aim of this study is to highlight the influence and importance of Primo Yúfera in the formation, development and consolidation of the journal Revista de Agroquímica y Tecnología de Alimentos, and to appraise his scientific contribution to this journal.

Electron doping through lithium intercalation to interstitial channels in tetrahedrally bonded SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sakai, Yuki; Center for Computational Materials, Institute for Computational Engineering and Sciences, The University of Texas at Austin, Austin, Texas 78712; Oshiyama, Atsushi

2015-11-07

We report on first-principles calculations that clarify the effect of lithium atom intercalation into zinc blende 3C-silicon carbide (3C-SiC) on electronic and structural properties. Lithium atoms inside 3C-SiC are found to donate electrons to 3C-SiC that is an indication of a new way of electron doping through the intercalation. The electrons doped into the conduction band interact with lithium cations and reduce the band spacing between the original valence and conduction bands. We have also found that a silicon monovacancy in 3C-SiC promotes the lithium intercalation, showing that the vacancy generation makes SiC as a possible anode material for lithium-ionmore » battery.« less

[Agustín Moreno: scientific psychology and women's legal responsibility in Spain].

PubMed

Bandrés, Javier; Llavona, Rafael

2011-11-01

Agustín Moreno Rodríguez (1886-1967) studied Medicine and Natural Sciences at the Central University of Spain, in Madrid. He was a student of Dr. Luis Simarro, the University's professor of Experimental Psychology and of Tomas Maestre, the University's professor of Medical Law, Toxicology and Psychiatry. In 1910, he published the text The woman's civil and penal responsibility during the menstrual period. In this work, he approaches the question of the legal responsibility of women, based on the principle of excitation/reaction of Claude Bernard and on his personal version of the concept of iteration elaborated by Luis Simarro. Dr. Moreno also defends the thesis that menstruation adds some uniqueness to the function of the feminine psyche and, therefore, modifies the responsibility of a woman's actions. We also comment on the predominant approach to the mind of women in the Spanish scientific psychology of that time and the reaction of the Spanish feminist intellectuals.

Dealing with scientific integrity issues: the Spanish experience.

PubMed

Puigdomènech, Pere

2014-02-01

Integrity has been an important matter of concern for the scientific community as it affects the basis of its activities. Most countries having a significant scientific activity have dealt with this problem by different means, including drafting specific legal or soft law regulations and the appointment of stable or ad hoc committees that take care of these questions. This has also been the case in Spain. After the period of transition between dictatorship to a democratic regime, and, particularly, after the entrance in the European Union, scientific activity has increased in the country. As it could be expected, problems of misconduct have appeared and different institutions have been dealing with these matters. One of the best examples is that of Consejo Superior de Investigaciones Cientificas (CSIC), the largest institution devoted to scientific research belonging to the Spanish Government. The experience of the CSIC’s Ethics Committee in dealing with conflicts related to scientific practices is discussed here.

The new powder diffractometer D1B of the Institut Laue Langevin

NASA Astrophysics Data System (ADS)

Puente Orench, I.; Clergeau, J. F.; Martínez, S.; Olmos, M.; Fabelo, O.; Campo, J.

2014-11-01

D1B is a medium resolution high flux powder diffractometer located at the Institut Laue Langevin, ILL. D1B a suitable instrument for studying a large variety of polycrystalline materials. D1B runs since 1998 as a CRG (collaborating research group) instrument, being exploited by the CNRS (Centre National de la Recherche Scientifique, France) and CSIC (Consejo Superior de Investigaciones Cientificas, Spain). In 2008 the Spanish CRG started an updating program which included a new detector and a radial oscillating collimator (ROC). The detector, which has a sensitive height of 100mm, covers an angular range of 128°. Its 1280 gold wires provide a neutron detection point every 0.1°. The ROC is made of 198 gadolinium- based absorbing collimation blades, regular placed every 0.67°. Here the present characteristics of D1B are reviewed and the different experimental performances will be presented.

CALIFA, the Calar Alto Legacy Integral Field Area survey. III. Second public data release

NASA Astrophysics Data System (ADS)

García-Benito, R.; Zibetti, S.; Sánchez, S. F.; Husemann, B.; de Amorim, A. L.; Castillo-Morales, A.; Cid Fernandes, R.; Ellis, S. C.; Falcón-Barroso, J.; Galbany, L.; Gil de Paz, A.; González Delgado, R. M.; Lacerda, E. A. D.; López-Fernandez, R.; de Lorenzo-Cáceres, A.; Lyubenova, M.; Marino, R. A.; Mast, D.; Mendoza, M. A.; Pérez, E.; Vale Asari, N.; Aguerri, J. A. L.; Ascasibar, Y.; Bekeraitė, S.; Bland-Hawthorn, J.; Barrera-Ballesteros, J. K.; Bomans, D. J.; Cano-Díaz, M.; Catalán-Torrecilla, C.; Cortijo, C.; Delgado-Inglada, G.; Demleitner, M.; Dettmar, R.-J.; Díaz, A. I.; Florido, E.; Gallazzi, A.; García-Lorenzo, B.; Gomes, J. M.; Holmes, L.; Iglesias-Páramo, J.; Jahnke, K.; Kalinova, V.; Kehrig, C.; Kennicutt, R. C.; López-Sánchez, Á. R.; Márquez, I.; Masegosa, J.; Meidt, S. E.; Mendez-Abreu, J.; Mollá, M.; Monreal-Ibero, A.; Morisset, C.; del Olmo, A.; Papaderos, P.; Pérez, I.; Quirrenbach, A.; Rosales-Ortega, F. F.; Roth, M. M.; Ruiz-Lara, T.; Sánchez-Blázquez, P.; Sánchez-Menguiano, L.; Singh, R.; Spekkens, K.; Stanishev, V.; Torres-Papaqui, J. P.; van de Ven, G.; Vilchez, J. M.; Walcher, C. J.; Wild, V.; Wisotzki, L.; Ziegler, B.; Alves, J.; Barrado, D.; Quintana, J. M.; Aceituno, J.

2015-04-01

This paper describes the Second Public Data Release (DR2) of the Calar Alto Legacy Integral Field Area (CALIFA) survey. The data for 200 objects are made public, including the 100 galaxies of the First Public Data Release (DR1). Data were obtained with the integral-field spectrograph PMAS/PPak mounted on the 3.5 m telescope at the Calar Alto observatory. Two different spectral setups are available for each galaxy, (i) a low-resolution V500 setup covering the wavelength range 3745-7500 Å with a spectral resolution of 6.0 Å (FWHM); and (ii) a medium-resolution V1200 setup covering the wavelength range 3650-4840 Å with a spectral resolution of 2.3 Å (FWHM). The sample covers a redshift range between 0.005 and 0.03, with a wide range of properties in the color-magnitude diagram, stellar mass, ionization conditions, and morphological types. All the cubes in the data release were reduced with the latest pipeline, which includes improvedspectrophotometric calibration, spatial registration, and spatial resolution. The spectrophotometric calibration is better than 6% and the median spatial resolution is 2.̋4. In total, the second data release contains over 1.5 million spectra. Based on observations collected at the Centro Astronómico Hispano Alemán (CAHA) at Calar Alto, operated jointly by the Max-Planck-Institut für Astronomie (MPIA) and the Instituto de Astrofísica de Andalucía (CSIC).The second data release is available at http://califa.caha.es/DR2

Tunable violet-blue emission from 3 C-SiC nanowires

NASA Astrophysics Data System (ADS)

Zhu, J.; Wu, H.; Chen, H. T.; Wu, X. L.; Xiong, X.

2009-04-01

Bulk quantities of straight and curled cubic silicon carbide nanowires (3 C-SiC NWs) are synthesized from the mixture of ZnS, Si, and C powders. The 3 C-SiC NWs are wrapped by amorphous SiO 2 shells with very thin thicknesses of less than 2.0 nm. The deionized water suspension of the as-made NWs shows a photoluminescence (PL) band centered at 548 nm, and a tunable violet-blue photoluminescence is observed as the excitation wavelength increases from 300 to 375 nm after the SiO 2 shell is removed. The PL band at 548 nm relates to the SiO 2 shell. Careful microstructural observation suggests that the tunable PL originates from the quantum confinement effect of 3 C-SiC nanocrystallites with sizes of several nm at the turning of the curled NWs.

Comparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites

PubMed Central

Li, Longbiao

2016-01-01

In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMCs. The hysteresis loops of cross-ply C/SiC and SiC/SiC composites corresponding to different peak stresses have been predicted using present analysis. The damage parameter, i.e., the proportion of matrix cracking mode 3 in the entire matrix cracking modes of the composite, and the hysteresis dissipated energy increase with increasing peak stress. The damage parameter and hysteresis dissipated energy of C/SiC composite under low peak stress are higher than that of SiC/SiC composite; However, at high peak stress, the damage extent inside of cross-ply SiC/SiC composite is higher than that of C/SiC composite as more transverse cracks and matrix cracks connect together. PMID:28787861

Crystalline silicon carbide nanoparticles encapsulated in branched wavelike carbon nanotubes: synthesis and optical properties.

PubMed

Xi, Guangcheng; Yu, Shijun; Zhang, Rui; Zhang, Meng; Ma, Dekun; Qian, Yitai

2005-07-14

A novel nanostructure, cubic silicon carbide (3C-SiC) nanoparticles encapsulated in branched wavelike carbon nanotubes have been prepared by a reaction of 1,2-dimenthoxyethane (CH3OCH2CH2OCH3), SiCl4, and Mg in an autoclave at 600 degrees C. According to X-ray powder diffraction, the products are composed of 3C-SiC and carbon. TEM and HRTEM images show that the as-synthesized products are composed of 3C-SiC nanoparticles encapsulated in branched carbon nanotubes with wavelike walls. The diameter of the 3C-SiC cores is approximately 20-40 nm and the thickness of the carbon shells is about 3-5 nm. In Raman scattering spectroscopy, both the TO (Gamma) phonon line and the LO (Gamma) phonon line have red shifts about 6 cm(-1) relative to that for the bulk 3C-SiC. The photoluminescence (PL) spectrum shows that there are two emission peaks: blue light emission (431 nm) and violet light emission (414 nm). A sequential deposition growth process (with cores as the templates for the shells) for the nanostructure was proposed.

Comparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites.

PubMed

Li, Longbiao

2016-01-19

In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMCs. The hysteresis loops of cross-ply C/SiC and SiC/SiC composites corresponding to different peak stresses have been predicted using present analysis. The damage parameter, i.e. , the proportion of matrix cracking mode 3 in the entire matrix cracking modes of the composite, and the hysteresis dissipated energy increase with increasing peak stress. The damage parameter and hysteresis dissipated energy of C/SiC composite under low peak stress are higher than that of SiC/SiC composite; However, at high peak stress, the damage extent inside of cross-ply SiC/SiC composite is higher than that of C/SiC composite as more transverse cracks and matrix cracks connect together.

Spain to Join ESO

NASA Astrophysics Data System (ADS)

2006-02-01

Today, during a ceremony in Madrid, an agreement was signed by the Spanish Minister of Education and Science, Mrs. María Jesús San Segundo, and the ESO Director General, Dr. Catherine Cesarsky, affirming their commitment to securing Spanish membership of ESO. ESO PR Photo 05a/06 ESO PR Photo 05a/06 Signature Event in Madrid Following approval by the Spanish Council of Ministers and the ratification by the Spanish Parliament of the ESO Convention and the associated protocols, Spain intends to become ESO's 12th member state on 1 July 2006. "Since long Spain was aware that entering ESO was a logical decision and it was even necessary for a country like Spain because Spain is ranked 8th in astrophysical research", said Mrs. María Jesús San Segundo. "The large scientific installations are not only necessary for research in different fields but are also partners and customers for hi-tech companies, helping to increase the funding of R&D." "Spanish Astronomy has made tremendous strides forward and we are delighted to welcome Spain as a new member of ESO. We very much look forward to working together with our excellent Spanish colleagues," said Dr. Cesarsky. "For ESO, the Spanish accession means that we can draw on the scientific and technological competences, some of them unique in Europe, that have been developed in Spain and, of course, for Europe the Spanish membership of ESO is an important milestone in the construction of the European Research Area." ESO PR Photo 05b/06 ESO PR Photo 05b/06 Signature Event in Madrid Indeed, Spain is an important member of the European astronomical community and has developed impressively over the last three decades, reaching maturity with major contributions in virtually all subjects of astronomy. In addition, Spain hosts, operates or owns a number of competitive facilities dedicated to foster astronomical research, among which the Observatorio del Roque de los Muchachos at La Palma, certainly the premier optical/infrared astronomical observing site in Europe and site of the Spanish 10m GranTeCan telescope now nearing completion. With the high quality of Spanish astronomical research as well as the technological competence of Spanish industry, it is only fitting that Spain should join ESO, world-leader in ground-based astronomy. Through ESO Spain will enjoy full access both to all of ESO's current facilities and to unrestricted participation in the great projects that ESO is planning for the future. Spain is already an active partner of the Atacama Large Millimeter Array (ALMA), whose construction and operations are led on behalf of Europe by ESO. ESO's Council approved the admission of Spain at its 107th meeting held in Garching on 7 and 8 December 2005. High resolution images and their captions are available on this page.

Comparison of Fatigue Life Between C/SiC and SiC/SiC Ceramic-Matrix Composites at Room and Elevated Temperatures

NASA Astrophysics Data System (ADS)

Longbiao, Li

2016-10-01

In this paper, the comparison of fatigue life between C/SiC and SiC/SiC ceramic-matrix composites (CMCs) at room and elevated temperatures has been investigated. An effective coefficient of the fiber volume fraction along the loading direction (ECFL) was introduced to describe the fiber architecture of preforms. Under cyclic fatigue loading, the fibers broken fraction was determined by combining the interface wear model and fibers statistical failure model at room temperature, and interface/fibers oxidation model, interface wear model and fibers statistical failure model at elevated temperatures in the oxidative environments. When the broken fibers fraction approaches to the critical value, the composites fatigue fracture. The fatigue life S-N curves and fatigue limits of cross-ply, 2D and 3D C/SiC and SiC/SiC composites at room temperature, 550 °C in air, 750 °C in dry and humid condition, 800 °C in air, 1000 °C in argon and air, 1100 °C, 1300 °C and 1500 °C in vacuum, have been predicted. At room temperature, the fatigue limit of 2D C/SiC composite with ECFL of 20 % lies between 0.78 and 0.8 tensile strength; and the fatigue limit of 2D SiC/SiC composite with ECFL of 20 % lies between 0.75 and 0.85 tensile strength. The fatigue limit of 2D C/SiC composite increases to 0.83 tensile strength with ECFL increasing from 20 to 22.5 %, and the fatigue limit of 3D C/SiC composite is 0.85 tensile strength with ECFL of 37 %. The fatigue performance of 2D SiC/SiC composite is better than that of 2D C/SiC composite at elevated temperatures in oxidative environment.

Growth of boron doped hydrogenated nanocrystalline cubic silicon carbide (3C-SiC) films by Hot Wire-CVD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pawbake, Amit; Tata Institute of Fundamental Research, Colaba, Mumbai 400 005; Mayabadi, Azam

Highlights: • Boron doped nc-3C-SiC films prepared by HW-CVD using SiH{sub 4}/CH{sub 4}/B{sub 2}H{sub 6}. • 3C-Si-C films have preferred orientation in (1 1 1) direction. • Introduction of boron into SiC matrix retard the crystallanity in the film structure. • Film large number of SiC nanocrystallites embedded in the a-Si matrix. • Band gap values, E{sub Tauc} and E{sub 04} (E{sub 04} > E{sub Tauc}) decreases with increase in B{sub 2}H{sub 6} flow rate. - Abstract: Boron doped nanocrystalline cubic silicon carbide (3C-SiC) films have been prepared by HW-CVD using silane (SiH{sub 4})/methane (CH{sub 4})/diborane (B{sub 2}H{sub 6}) gasmore » mixture. The influence of boron doping on structural, optical, morphological and electrical properties have been investigated. The formation of 3C-SiC films have been confirmed by low angle XRD, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), Fourier transform infra-red (FTIR) spectroscopy and high resolution-transmission electron microscopy (HR-TEM) analysis whereas effective boron doping in nc-3C-SiC have been confirmed by conductivity, charge carrier activation energy, and Hall measurements. Raman spectroscopy and HR-TEM analysis revealed that introduction of boron into the SiC matrix retards the crystallanity in the film structure. The field emission scanning electron microscopy (FE-SEM) and non contact atomic force microscopy (NC-AFM) results signify that 3C-SiC film contain well resolved, large number of silicon carbide (SiC) nanocrystallites embedded in the a-Si matrix having rms surface roughness ∼1.64 nm. Hydrogen content in doped films are found smaller than that of un-doped films. Optical band gap values, E{sub Tauc} and E{sub 04} decreases with increase in B{sub 2}H{sub 6} flow rate.« less

Amorphization of nanocrystalline 3C-SiC irradiated with Si+ ions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Weilin; Wang, Haiyan; Kim, Ickchan

2010-11-23

Irradiation induced amorphization in nanocrystalline and single crystal 3C-SiC has been studied using 1 MeV Si+ ions under the identical irradiation conditions at room temperature and 400 K. The disordering behavior has been characterized using in-situ ion channeling and ex-situ x-ray diffraction methods. The results show that, compared to single crystal 3C-SiC, full amorphization of small 3C-SiC grains (~3.8 nm in size) occurs at a slightly lower dose at room temperature. For grains with sizes of 3.0 - 3.8 nm, the amorphization dose is lower at room temperature than 400 K. A significantly lower dose for amorphization of smaller grainsmore » (2.0 nm in size) is observed at 400 K. The behavior has been interpreted based on the competition between the interface and interior amorphization.« less

X-37 C-Sic CMC Control Surface Components Development [Status of the NASA/Boeing/USAF Orbital Vehicle and Related Efforts

NASA Technical Reports Server (NTRS)

Valentine, Peter G; Rivers, H. Kevin; Chen, Victor L.

2004-01-01

Carbon/Silicon-Carbide (C-Sic) ceramic matrix composite (CMC) flaperon and ruddervator control surface components are being developed for the X-37 Orbital Vehicle (OV). The results of the prior NASA LaRC led work, aimed at developing C-Sic flaperon and ruddervator components for the X-37, will be reviewed. The status of several on-going and/or planned NASA, USAF, and Boeing programs that will support the development of control surface components for the X-37 OV will also be reviewed. The overall design and development philosophy being employed to assemble a team(s) to develop both: (a) C-Sic hot structure control surface components for the X-37 OV, and (b) carbon-carbon (C-C) hot structure components (a risk-reduction backup option for the OV), will be presented.

Oxidation Kinetics and Strength Degradation of Carbon Fibers in a Cracked Ceramic Matrix Composite

NASA Technical Reports Server (NTRS)

Halbig, Michael C.

2003-01-01

Experimental results and oxidation modeling will be presented to discuss carbon fiber susceptibility to oxidation, the oxidation kinetics regimes and composite strength degradation and failure due to oxidation. Thermogravimetric Analysis (TGA) was used to study the oxidation rates of carbon fiber and of a pyro-carbon interphase. The analysis was used to separately obtain activation energies for the carbon constituents within a C/SiC composite. TGA was also conducted on C/SiC composite material to study carbon oxidation and crack closure as a function of temperature. In order to more closely match applications conditions C/SiC tensile coupons were also tested under stressed oxidation conditions. The stressed oxidation tests show that C/SiC is much more susceptible to oxidation when the material is under an applied load where the cracks are open and allow for oxygen ingress. The results help correlate carbon oxidation with composite strength reduction and failure.

The OJ287 observing campaign hots up

NASA Astrophysics Data System (ADS)

Poyner, G.

2006-12-01

In the August 2006 issue of the Journal [116(4), 163-164] I gave details of the BAAVSS observing campaign to monitor the binary black hole OJ287. The campaign is now once again in full swing for the 2006/2007 season, now that solar conjunction is finally over. During the summer break, new analysis was done on the BAAVSS & TA data by Dr Mauri Valtonen (Dept of Physics and Tuorla Observatory, University of Turku, Finland & Dept of Physics, University of the West Indies, Trinidad) and Dr Mark Kidger (Herschel Science Centre, European Space Astronomy centre, Villafranca del Castillo Satellite Tracking Station, Madrid, Spain, & INSA) and Dr Harry Lehto (NORDITA, Copenhagen, Denmark). A detailed examination of these data from the past 15 years, and especially the last 12 months, has led to some interesting conclusions.

The Spanish Society of Soil Science: history and future perspectives

NASA Astrophysics Data System (ADS)

Bellinfante, Nicolás; Arbelo, Dolores; Rodríguez, Antonio

2013-04-01

The Spanish Society of Soil Science (SECS; http://www.secs.com.es) has reached sixty years of existence, after being established in 1947 at the Spanish Council for Scientific Research (CSIC) as an initiative of renowned scientists including José María Albareda, Salvador Rivas Goday, Fernando Burriel, Tomás Alvira and others. However, soil studies in Spain began in the first third of XX century, coordinated by Emilio Huguet del Villar, internationally outstanding researcher who was the President of the Subcommittee for the Mediterranean Region of the International Society Soil Science, with the activities of the Forest Research Institute and the Institute of Mediterranean Soils of the Regional Catalonian Government. With the creation of the CSIC and the Spanish Institute of Soil Science and Agrobiology, directed by José M. Albareda, Soil Science research was promoted in all scientific fields and through the Spanish geography. The SECS is considered equally heiress of previously existing organizations, in particular the Spanish Commission of Soil Science and Phytogeography, created in 1925, which was the Spanish voice in various international organizations and meetings related with Soil Science. After these years, Soil Science has developed considerably, showing a great diversification of fields of study and research and its applications, as well as a growing social awareness of the soil degradation processes and the need to implement measures to protect natural resources nonrenewable on a human scale, and an increasing role of universities and CSIC in Soil Science research. Currently, the SECS is a scientific organization dedicated to promoting the study, knowledge, research and protection of soil resources; spread the scientific importance of soil functions as nonrenewable natural resource in society and promote the interest in its protection; and preserve the knowledge about soils, their management and use, both from productive and environmental perspectives. The SECS has helped and sponsored numerous conferences and seminars related to different aspects of Soil Science, and directly organizes the National Congress of Soil Science (since 2004, the Iberian Congress of Soil Science) and National Soil Meetings held annual or biannually without interruption since 1975. Some of the projects currently being carried out include TeSECS (a database of PhD theses), GloSECS (an updated multilingual soil science glossary), promotion of soil museums. Also, the SECS publishes the four-monthly Spanish Journal of Soil Science since 2011 (http://sjss.universia.net).

The Cup Anemometer, a Fundamental Meteorological Instrument for the Wind Energy Industry. Research at the IDR/UPM Institute

PubMed Central

Pindado, Santiago; Cubas, Javier; Sorribes-Palmer, Félix

2014-01-01

The results of several research campaigns investigating cup anemometer performance carried out since 2008 at the IDR/UPM Institute are included in the present paper. Several analysis of large series of calibrations were done by studying the effect of the rotor's geometry, climatic conditions during calibration, and anemometers' ageing. More specific testing campaigns were done regarding the cup anemometer rotor aerodynamics, and the anemometer signals. The effect of the rotor's geometry on the cup anemometer transfer function has been investigated experimentally and analytically. The analysis of the anemometer's output signal as a way of monitoring the anemometer status is revealed as a promising procedure for detecting anomalies. PMID:25397921

CARMENES-NIR channel spectrograph cooling system AIV: thermo-mechanical performance of the instrument

NASA Astrophysics Data System (ADS)

Becerril, S.; Mirabet, E.; Lizon, J. L.; Abril, M.; Cárdenas, C.; Ferro, I.; Morales, R.; Pérez, D.; Ramón, A.; Sánchez-Carrasco, M. A.; Quirrenbach, A.; Amado, P.; Ribas, I.; Reiners, A.; Caballero, J. A.; Seifert, W.; Herranz, J.

2016-07-01

CARMENES is the new high-resolution high-stability spectrograph built for the 3.5m telescope at the Calar Alto Observatory (CAHA, Almería, Spain) by a consortium formed by German and Spanish institutions. This instrument is composed by two separated spectrographs: VIS channel (550-1050 nm) and NIR channel (950- 1700 nm). The NIR-channel spectrograph's responsible is the Instituto de Astrofísica de Andalucía (IAACSIC). It has been manufactured, assembled, integrated and verified in the last two years, delivered in fall 2015 and commissioned in December 2015. One of the most challenging systems in this cryogenic channel involves the Cooling System. Due to the highly demanding requirements applicable in terms of stability, this system arises as one of the core systems to provide outstanding stability to the channel. Really at the edge of the state-of-the-art, the Cooling System is able to provide to the cold mass ( 1 Ton) better thermal stability than few hundredths of degree within 24 hours (goal: 0.01K/day). The present paper describes the Assembly, Integration and Verification phase (AIV) of the CARMENES-NIR channel Cooling System implemented at IAA-CSIC and later installation at CAHA 3.5m Telescope, thus the most relevant highlights being shown in terms of thermal performance. The CARMENES NIR-channel Cooling System has been implemented by the IAA-CSIC through very fruitful collaboration and involvement of the ESO (European Southern Observatory) cryo-vacuum department with Jean-Louis Lizon as its head and main collaborator. The present work sets an important trend in terms of cryogenic systems for future E-ELT (European Extremely Large Telescope) large-dimensioned instrumentation in astrophysics.

Measurements of Breakdown Field and Forward Current Stability in 3C-SiC P-N Junction Diodes Grown on Step-Free 4H-SiC

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Spry, David J.; Trunek, Andrew J.

2005-01-01

This paper reports on initial fabrication and electrical characterization of 3C-SiC p-n junction diodes grown on step-free 4H-SiC mesas. Diodes with n-blocking-layer doping ranging from approx. 2 x 10(exp 16)/cu cm to approx.. 5 x 10(exp 17)/cu cm were fabricated and tested. No optimization of junction edge termination or ohmic contacts was employed. Room temperature reverse characteristics of the best devices show excellent low-leakage behavior, below previous 3C-SiC devices produced by other growth techniques, until the onset of a sharp breakdown knee. The resulting estimated breakdown field of 3C-SiC is at least twice the breakdown field of silicon, but is only around half the breakdown field of <0001> 4H-SiC for the doping range studied. Initial high current stressing of 3C diodes at 100 A/sq cm for more than 20 hours resulted in less than 50 mV change in approx. 3 V forward voltage. 3C-SiC, pn junction, p+n diode, rectifier, reverse breakdown, breakdown field,heteroepitaxy, epitaxial growth, electroluminescence, mesa, bipolar diode

Analysis of metal tolerance in Rhizobium leguminosarum strains isolated from an ultramafic soil.

PubMed

Rubio-Sanz, Laura; Brito, Belén; Palacios, Jose

2018-02-01

Natural habitats containing high amounts of heavy metals provide a valuable source of bacteria adapted to deal with metal toxicity. A functional analysis of the population of legume endosymbiotic bacteria in an ultramafic soil was undertaken by studying a collection of Rhizobium leguminosarum bv viciae (Rlv) isolates obtained using pea as trap plant. One of the isolates, Rlv UPM1137, was selected on the basis of its higher tolerance to nickel and cobalt and presence of inducible mechanisms for such tolerance. A random transposon mutagenesis of Rlv UPM1137 allowed the generation of 14 transposant derivatives with increased nickel sensitivity; five of these transposants were also more sensitive to cobalt. Sequencing of the insertion sites revealed that one of the transposants (D2250) was affected in a gene homologous to the cation diffusion facilitator gene dmeF first identified in the metal-resistant bacterium Cupriavidus metallidurans CH34. The symbiotic performance of D2250 and two other transposants bearing single transposon insertions was unaffected under high-metal conditions, suggesting that, in contrast to previous observations in other Rlv strain, metal tolerance in UPM1137 under symbiotic conditions might be supported by functional redundancy between several mechanisms. © FEMS 2018. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The Spanish participation in the SKA

NASA Astrophysics Data System (ADS)

Verdes-Montenegro, L.; Garrido, J.; González-García, M.

2017-03-01

The Square Kilometre Array (SKA) will be a radio interferometer aiming to answer fundamental questions in Astrophysics, Fundamental Physics, and Astrobiology. It will be composed of thousands of antennas distributed over distances of more than 3000 kilometres on both Africa and Australia. The SKA has been recently identified as a Landmark Project in the European Strategy Forum on Research Infrastructures (ESFRI) roadmap. Spain has been participating in SKA-related activities since the 1990s, coordinated since 2011 by the Instituto de Astrofísica de Andalucía (IAA-CSIC). Up to now, 21 researchers participate in 7 out of the 11 main SKA Science Working Groups, and a total of 119 researchers from 40 Spanish centres have participated in the Spanish SKA White Book, published in 2015. From a technological point of view, more than 20 research centres and companies are contributing to the design of the SKA as part of 7 international consortia. The Spanish contribution was estimated in 2M euro (2014), officially recognized by the SKA Organisation Director General in a letter to the Spanish Ministry of Economy and Competitiveness. In addition, the Spanish Astronomy Infrastructures Network (RIA from its Spanish initials) issued a recommendation on the interest of the scientific community and industry that Spain explores the possibility to join the SKA project as Full Member before the construction phase starts. In December 2015, the Spanish Secretary of State of Research, Development and Innovation sent a letter to the SKA Organisation Director General proposing to establish a dialogue in order to explore scenarios for Spain to join the SKA, what constitutes a further motivation for the Spanish community to continue its efforts.

Innovative teaching: Use of Screencast in the Agronomist Engineer High School of the UPM

NASA Astrophysics Data System (ADS)

Mediola, Maria Angeles; Aguado, Pedro Luis; Espejo, Rafael

2013-04-01

In the last academic courses, the Polytechnic University of Madrid (UPM) has supported the use of multimedia materials and methods in education and learning processes to improve the efficiency and impact obtained by faculty and students. With this aim during 2011-2012 course the multimedia method titled "Screencast" has been implemented in the subject "Plantas de Interés Agroalimentario" included in the curricula of the Agronomist Engineer High School. Next year will be apply in the subject "Soil Science" in the new degree. The Screencast tools allow record digital videos with sound directly into a computer so lecture and class can be recorded directly. The videos can be edited after including narrations, special effects as zoom, notes, images, etc. Screencast tools are simple use tools which are easy made tutorials, manuals, presentations and shows that help to students with different processes that are very hard to understand for students (1) (2). There are different Screencast tools in the market and after an evaluation process the most suitable for our need has been BB FlashBack Express (3) because is easy use, free and compatible with WEBCAM. This software allows export to Flash and AVI video formats. In our case the format chosen was the Flash format because the file sizes obtained were smaller than in AVI format. The use of BB FlashBack Express of the studied subject allowed make easy self-learning multimedia material and testing different methodologies and procedures for the use of this multimedia source in Internet. The BB FlashBack Express software was used during the course by teachers and students of this subject achieving a good improvement in the education and learning processes. The evaluation of the results obtained in the application of this method had shown that ability of students to use new technologies and spread their ideas has been increased as much into as outside classrooms. The materials made in this work had been joined to different learning platforms of the UPM as UPM Educational Channel in YouTube and others video-conference applications developed by UPM. There is possible to export the recorded material to SCORM format which can be included in Moodle (Learning Virtual Environment) and be used by students when they needed it. Bibliography: [1] Lloyd, S., Robertson, C. (2012). Screencast Tutorials Enhance Student Learning of Statistics. Journal of Teaching and Psychology. January 2012. vol. 39 (1). pp. 67-71.

GuMNet - Guadarrama Monitoring Network initiative (Madrid,Spain)

NASA Astrophysics Data System (ADS)

Santolaria-Canales, Edmundo

2017-04-01

The Guadarrama Monitoring Network initiative (GuMNet) is an observational infrastructure focused on monitoring the state of the atmosphere, surface and subsurface in the Sierra de Guadarrama, 50 km NW of the city of Madrid. The network is composed of 10 automatic real time weather stations ranging from low altitude (ca. 900 m.a.s.l) to high mountain areas (ca. 2400 m.a.s.l). The GuMNet infrastructure consists in 10 real time automatic weather stations with instrumentation for observing the state of the atmosphere, surface and the subsurface at the Sierra de Guadarrama, just 50 km north-northwest of the city of Madrid. GuMNet lays the foundations of a research network on weather, soil thermodynamics, boundary layer physics, climate and ecosystem oriented impacts, air pollutions, etc. in the Sierra de Guadarrama. GuMNet represents a first step to provide a unique observational network in an environment of high protection to be used as a laboratory serving a wide range of scientific and educational interests. High altitude sites are focused on periglacial areas and lower altitude sites have emphasis on pastures. One of the low altitude sites is equipped with a 10 m high anemometric tower with a 3D sonic anemometer at the top jointly with a CO2/H2O analyzer that will allow sampling of wind profiles and H2O and CO2 eddy covariance fluxes, important for soil respiration and CO2 and water vapor exchange. A portable station has also a 3D sonic anemometer with CO2/H2O analyzer, this 4 meters-high portable tower is designed for comparison with other soil terrain fluxes. The network is connected via general packet radio service (GPRS) to the central lab in the Campus of Excellence of Moncloa and a management software has been developed to handle the operation of the infrastructure. The deployment of instrumentation and connection of sites to the network was finished in 2016. GuMNet is currently in the process of becoming operational. Conceptually, GuMNet intends to convert a well known space such as the Sierra de Guadarrama into a laboratory for interdisciplinary research. On one hand, a space for exchange of observational and scientific discussion among researchers. On the other hand, online platforms and various informative materials will allow the public to access the results generated by different research lines with a focus on this region. GuMNet is part of the MRI initiative and as well as ongoing collaboration with the Global Precipitation Measurements (NASA). This initiative is supported and developed by research groups integrating the GuMNet Consortium from the Complutense and Polytechnical Universities of Madrid (UCM and UPM), the Energetic Environmental and Technological Research Centre (CIEMAT), the Spanish meteorological agency, AEMET, the National Park Sierra de Guadarrama (PNSG) and the National Research Council (CSIC). Web and contact: http://www.ucm.es/gumnet/

Stresses in chemical vapor deposited epitaxial 3C-SiC membranes

NASA Astrophysics Data System (ADS)

Su, C. M.; Fekade, A.; Spencer, M.; Wuttig, Manfred

1995-02-01

The internal stresses in chemical-vapor-deposited 3C-SiC films were studied by a vibrating membrane technique. The differential thermal expansivity of 3C-SiC films was investigated by the change of the internal stress as a function of temperature. It was found that the internal stress of the films is dominated by thermal stresses and its magnitude depends both on doping and the film thickness. While p doping substantially increases the stress, increasing the film thickness reduces the stress of the SiC layer. The thermal expansivity of the SiC layer shows a lower value which is significantly less than of bulk 3C-SiC and tends to approach the expansivity of the Si substrate. It is proposed that the stress dependence of the SiC films on doping and film thickness is the result of the film morphology which is heavily faulted for very thin films and more perfect as the film thickness increases.

Effect of 3C-SiC intermediate layer in GaN—based light emitting diodes grown on Si(111) substrate

NASA Astrophysics Data System (ADS)

Zhu, Youhua; Wang, Meiyu; Li, Yi; Tan, Shuxin; Deng, Honghai; Guo, Xinglong; Yin, Haihong; Egawa, Takashi

2017-03-01

GaN-based light emitting diodes (LEDs) have been grown by metalorganic chemical vapor deposition on Si(111) substrate with and without 3C-SiC intermediate layer (IL). Structural property has been characterized by means of atomic force microscope, X-ray diffraction, and transmission electron microscope measurements. It has been revealed that a significant improvement in crystalline quality of GaN and superlattice epitaxial layers can be achieved by using 3C-SiC as IL. Regarding of electrical and optical characteristics, it is clearly observed that the LEDs with its IL have a smaller leakage current and higher light output power comparing with the LEDs without IL. The better performance of LEDs using 3C-SiC IL can be contributed to both of the improvements in epitaxial layers quality and light extraction efficiency. As a consequence, in terms of optical property, a double enhancement of the light output power and external quantum efficiency has been realized.

Piezoresistive effect in p-type 3C-SiC at high temperatures characterized using Joule heating

PubMed Central

Phan, Hoang-Phuong; Dinh, Toan; Kozeki, Takahiro; Qamar, Afzaal; Namazu, Takahiro; Dimitrijev, Sima; Nguyen, Nam-Trung; Dao, Dzung Viet

2016-01-01

Cubic silicon carbide is a promising material for Micro Electro Mechanical Systems (MEMS) applications in harsh environ-ments and bioapplications thanks to its large band gap, chemical inertness, excellent corrosion tolerance and capability of growth on a Si substrate. This paper reports the piezoresistive effect of p-type single crystalline 3C-SiC characterized at high temperatures, using an in situ measurement method. The experimental results show that the highly doped p-type 3C-SiC possesses a relatively stable gauge factor of approximately 25 to 28 at temperatures varying from 300 K to 573 K. The in situ method proposed in this study also demonstrated that, the combination of the piezoresistive and thermoresistive effects can increase the gauge factor of p-type 3C-SiC to approximately 20% at 573 K. The increase in gauge factor based on the combination of these phenomena could enhance the sensitivity of SiC based MEMS mechanical sensors. PMID:27349378

Piezoresistive effect in p-type 3C-SiC at high temperatures characterized using Joule heating

NASA Astrophysics Data System (ADS)

Phan, Hoang-Phuong; Dinh, Toan; Kozeki, Takahiro; Qamar, Afzaal; Namazu, Takahiro; Dimitrijev, Sima; Nguyen, Nam-Trung; Dao, Dzung Viet

2016-06-01

Cubic silicon carbide is a promising material for Micro Electro Mechanical Systems (MEMS) applications in harsh environ-ments and bioapplications thanks to its large band gap, chemical inertness, excellent corrosion tolerance and capability of growth on a Si substrate. This paper reports the piezoresistive effect of p-type single crystalline 3C-SiC characterized at high temperatures, using an in situ measurement method. The experimental results show that the highly doped p-type 3C-SiC possesses a relatively stable gauge factor of approximately 25 to 28 at temperatures varying from 300 K to 573 K. The in situ method proposed in this study also demonstrated that, the combination of the piezoresistive and thermoresistive effects can increase the gauge factor of p-type 3C-SiC to approximately 20% at 573 K. The increase in gauge factor based on the combination of these phenomena could enhance the sensitivity of SiC based MEMS mechanical sensors.

Climatic record of the Iberian peninsula from lake Moncortes' sediments

NASA Astrophysics Data System (ADS)

Cao, Min; Huguet, Carme; Rull, Valenti; Valero, Blas; Rosell-Mele, Antoni

2014-05-01

Climatic record of the Iberian peninsula from lake Moncortes' sediments Min Cao1, Carme Huguet1, Valenti Rull2, Blas L. Valero-Garces3, Antoni Rosell-Melé1,4 1Institut de Ciència i Tecnologia Ambientals (ICTA), Universitat Autònoma de Barcelona, 08193 Cerdanyola del Vallès, Catalonia, Spain; 2Institut de Botanic de Barcelona (CSIC), Passeig del Migdia s/n, 08038, Barcelona, Spain, 3 Instituto Pirenaico de Ecologıa (CSIC), Avda. Montañana 1005, 50059 Zaragoza, Spain, 4Institució Catalana de Recerca i Estudis Avançats (ICREA), 08010 Barcelona, Catalonia, Spain. The continuing buildup of industrial greenhouse gases in the atmosphere and concomitant increase in global temperatures has made much of the world's society aware that decades to centuries of environmental change lie ahead, and that these will have profound economic, political and societal impacts. The Iberian Peninsula lies in the boundary between tropical and subtropical climates and seems to amplify the climatic signals form the northern hemisphere through both atmospheric and water circulation feedbacks, making it an ideal site to monitor Northern hemisphere climate changes. This extreme sensitivity to climatic changes also makes the Iberian Peninsula extremely vulnerable to future climate changes. This is why understanding sensitivity to climate change and the consequences it will have on both climate and the hydrological cycle is key to implement preventive measures. The aim of our study is to come up with a high resolution quantitative reconstruction of climate variability (temperature, production and precipitation) in the Iberian Peninsula from lake sediments. We also want to establish the relation between those changes and the ones observed in both ice cores from Greenland and paleotemperature records from marine sediments of the continental Iberian margin. For these reasons we sampled a core in Moncortes (42.3N, 0.99E), a lake of karstic origin with an average depth of 25m and an area of 0.19km2. Lake Moncortes is situated at 1065 m above sea level, has an average temperature of 10ºC (minimum 3 and maximum 16ºC) and a mean annual precipitation of 770mm. We used the MBT/CBT (Weijers et al. 2007) proxy of pH and terrestrial temperature and the TEX86 temperature proxy (Schouten et al. 2002) to estimate changes in and around the lake. Both proxies are based on the glycerol dialkyl glycerol tetraethers (GDGTs) of archaea (isoprenoid GDGTs) and bacteria (branched GDGTs) origin. We also measured soils surrounding the lake (Menges et al. 2013) in order to establish end-members for the proxies as well as organic matter transport. Data on n-alkane isotopes will help establish hydrographic regime changes. We observe changes in temperature and humidity consistent with those on teh northern hemisphere. J. Menges, C. Huguet, J.M. Alcañiz, S. Fietz, D. Sachse, A. Rosell-Melé Biogechemistry discussions (2013), BGD bg-2013-198. S. Schouten, E.C. Hopmans, E. Schefuss, J.S.S. Damste, Earth and Planetary Science Letters 204(2002) 265-274 J.W.H. Weijers, S. Schouten, J.S.S. Damste, Geochimica Et Cosmochimica Acta 71(2007) A1098-A1098.

Underwater Photogrammetry, Coded Target and Plenoptic Technology: a Set of Tools for Monitoring Red Coral in Mediterranean Sea in the Framework of the "perfect" Project

NASA Astrophysics Data System (ADS)

Drap, P.; Royer, J. P.; Nawaf, M. M.; Saccone, M.; Merad, D.; López-Sanz, À.; Ledoux, J. B.; Garrabou, J.

2017-02-01

PErfECT "Photogrammetry, gEnetic, Ecology for red coral ConservaTion" is a project leaded by the Laboratoire des Sciences de lInformation et des Systmes (LSIS - UMR 7296 CNRS) from the Aix-Marseille University (France) in collaboration with the Spanish National Agency for Scientific Research (CSIC, Spain). The main objective of the project is to develop innovative Tools for the conservation of the Mediterranean red coral, Corallium rubrum. PErfECT was funded by the Total Fundation. The adaptation of digital photogrammetric techniques for use in submarine is rapidly increasing in recent years. In fact, these techniques are particularly well suited for use in underwater environments. PErfECT developed different photogrammetry tools to enhance the red coral population surveys based in: (i) automatic orientation on coded quadrats, (ii) use of NPR (Non Photo realistic Rendering) techniques, (iii) the calculation of distances between colonies within local populations and finally (iv) the use of plenoptic approaches in underwater conditions.

Astroaccesible: Bringing the study of the Universe to the visually impaired

NASA Astrophysics Data System (ADS)

Pérez-Montero, E.; García Gómez-Caro, E.; Sánchez Molina, Y.; Ortiz-Gil, A.; López de Lacalle, S.; Tamayo, A.

2017-03-01

Astroaccesible is an outreach project carried out in collaboration with the IAA-CSIC and ONCE to make astronomy more accessible to the visually impaired people so the main source of information is not based on the use of images. The activities of the project started in 2014 and since then it has received financial support from SEA in 2015 and from FECYT in 2016 making possible to extend the activity for many ONCE centres in Spain. The activities include in-person classes using adequate descriptions, high-contrast images for those people with visual remain and touching material representing basic concepts about sizes, scales and distances of astronomical bodies. To maximize the impact of the contents of the project many of the contents, summary of activities, links to resources are available through the web page of the project. This project focused on astronomy is also intended to make the scientific community more sensitive to perform more accessible explanations of their results.

Identification of nasopharyngeal carcinoma from photoluminescence spectra of 3C-SiC nanocrystals

NASA Astrophysics Data System (ADS)

Wang, Li-Fen; Guo, Jun-Hong; Huang, Zhi-Chun; Gu, Jian-Sen; Feng, Li-Ren; Liu, Li-Zhe

2017-09-01

The identification of intracellular pH (pHi) during carcinogenesis progression plays a crucial role in the studies of biochemistry, cytology, and clinical medicine. In this work, 3C-SiC nanocrystals (NCs), which can effectively monitor the pH environment by using the linear relation between photoluminescence intensity and surface OH- and H+ concentration, are adapted as fluorescent probes for monitoring carcinogenesis progression of nasopharyngeal carcinoma. Our results demonstrated that 3C-SiC NCs are compatible with living cells and have low cytotoxicity. The pHi measurements in different carcinogenesis environments indicate the validity and sensitivity of this technology in identifying nasopharyngeal carcinoma in application.

What Works in Coaching and Sport Instructor Certification Programs? The Participants' View

ERIC Educational Resources Information Center

Mccullick, Bryan A.; Belcher, Don; Schempp, Paul G.

2005-01-01

Coaching and sport instructor certification (CSIC) programs provide teachers with a substantial content and pedagogical knowledge base. Continual improvement of these programs helps ensure that those certified are effective and competent. The purpose of this study was to ascertain the strengths of a CSIC program based on the perceptions of the…

BURNER RIG TESTING OF A500 C/SiC

DTIC Science & Technology

2018-03-17

test program characterized the durability behavior of A500® C/SiC ceramic matrix composite material at room and elevated temperature . Specimens were...7 Figure 6. Typical Room- Temperature Tensile Stress-Versus-Strain Trace for As-Manufactured A500...Operation ......................................... 18 Figure 17. Example of the Burner Rig Temperature Profiles Used

Atomic Force Microscope Observation of Growth and Defects on As-Grown (111) 3C-SiC Mesa Surfaces

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Trunek, Andrew J.; Powell, J. Anthony

2004-01-01

This paper presents experimental atomic force microscope (AFM) observations of the surface morphology of as-grown (111) silicon-face 3C-SiC mesa heterofilms. Wide variations in 3C surface step structure are observed as a function of film growth conditions and film defect content. The vast majority of as-grown 3C-SiC surfaces consisted of trains of single bilayer height (0.25 nm) steps. Macrostep formation (i.e., step-bunching) was rarely observed, and then only on mesa heterofilms with extended crystal defects. As supersaturation is lowered by decreasing precursor concentration, terrace nucleation on the top (111) surface becomes suppressed, sometimes enabling the formation of thin 3C-SiC film surfaces completely free of steps. For thicker films, propagation of steps inward from mesa edges is sometimes observed, suggesting that enlarging 3C mesa sidewall facets begin to play an increasingly important role in film growth. The AFM observation of stacking faults (SF's) and 0.25 nm Burgers vector screw component growth spirals on the as-grown surface of defective 3C films is reported.

DIFFUSION OF MAGNESIUM AND MICROSTRUCTURES IN Mg+ IMPLANTED SILICON CARBIDE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Weilin; Edwards, Danny J.; Jung, Hee Joon

2014-08-28

Following our previous reports [ 1- 3], further isochronal annealing (2 hrs.) of the monocrystalline 6H-SiC and polycrystalline CVD 3C-SiC was performed at 1573 and 1673 K in Ar environment. SIMS data indicate that observable Mg diffusion in 6H-SiC starts and a more rapid diffusion in CVD 3C-SiC occurs at 1573 K. The implanted Mg atoms tend to diffuse deeper into the undamaged CVD 3C-SiC. The microstructure with Mg inclusions in the as-implanted SiC has been initially examined using high-resolution STEM. The presence of Mg in the TEM specimen has been confirmed based on EDS mapping. Additional monocrystalline 3C-SiC samplesmore » have been implanted at 673 K to ion fluence 3 times higher than the previous one. RBS/C analysis has been performed before and after thermal annealing at 1573 K for 12 hrs. Isothermal annealing at 1573 K is being carried out and Mg depth profiles being measured. Microstructures in both the as-implanted and annealed samples are also being examined using STEM.« less

Femtosecond pulsed laser micromachining of single crystalline 3C SiC structures based on a laser-induced defect-activation process

NASA Astrophysics Data System (ADS)

Dong, Yuanyuan; Zorman, Christian; Molian, Pal

2003-09-01

A femtosecond pulsed Ti:sapphire laser with a pulse width of 120 fs, a wavelength of 800 nm and a repetition rate of 1 kHz was employed for direct write patterning of single crystalline 3C-SiC thin films deposited on Si substrates. The ablation mechanism of SiC was investigated as a function of pulse energy. At high pulse energies (>1 µJ), ablation occurred via thermally dominated processes such as melting, boiling and vaporizing of single crystalline SiC. At low pulse energies, the ablation mechanism involved a defect-activation process that included the accumulation of defects, formation of nano-particles and vaporization of crystal boundaries, which contributed to well-defined and debris-free patterns in 3C-SiC thin films. The interactions between femtosecond laser pulses and the intrinsic lattice defects in epitaxially grown 3C-SiC films led to the generation of nano-particles. Micromechanical structures such as micromotor rotors and lateral resonators were patterned into 3C-SiC films using the defect-activation ablation mechanism.

Electrical properties of epitaxial 3C- and 6H-SiC p-n junction diodes produced side-by-side on 6H-SiC substrates

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Larkin, David J.; Starr, Jonathan E.; Powell, J. Anthony; Salupo, Carl S.; Matus, Lawrence G.

1994-01-01

3C-SiC (beta-SiC) and 6H-SiC p-n junction diodes have been fabricated in regions of both 3C-SiC and 6H-SiC epitaxial layers which were grown side-by-side on low-tilt-angle 6H-SiC substrates via a chemical vapor deposition (CVD) process. Several runs of diodes exhibiting state-of-the-art electrical characteristics were produced, and performance characteristics were measured and compared as a function of doping, temperature, and polytype. The first 3C-SiC diodes which rectify to reverse voltages in excess of 300 V were characterized, representing a six-fold blocking voltage improvement over experimental 3C-SiC diodes produced by previous techniques. When placed under sufficient forward bias, the 3C-SiC diodes emit significantly bright green-yellow light while the 6H-SiC diodes emit in the blue-violet. The 6H-SiC p-n junction diodes represent the first reported high-quality 6H-SiC devices to be grown by CVD on very low-tilt-angle (less than 0.5 deg off the (0001) silicon face) 6H substrates. The reverse leakage current of a 200 micron diameter circular device at 1100 V reverse bias was less than 20 nA at room temperature, and excellent rectification characteristics were demonstrated at the peak characterization temperature of 400 C.

On the advance of non-invasive techniques implementation for monitoring moisture distribution in cultural heritage: a case study

NASA Astrophysics Data System (ADS)

Inmaculada Martínez Garrido, María; Gómez Heras, Miguel; Fort González, Rafael; Valles Iriso, Javier; José Varas Muriel, María

2015-04-01

This work presents a case study developed in San Juan Bautista church in Talamanca de Jarama (12th -16th Century), which have been selected as an example of a historical church with a complex construction with subsequent combination of architectural styles and building techniques and materials. These materials have a differential behavior under the influence of external climatic conditions and constructive facts. Many decay processes related to humidity are affecting the building's walls and also have influence in the environmental dynamics inside the building. A methodology for monitoring moisture distribution on stone and masonry walls and floors was performed with different non-invasive techniques as thermal imaging, wireless sensor networks (WSN), portable moisture meter, electrical resistivity tomography (ERT) and ground-penetrating radar (GPR), in order to the evaluate the effectiveness of these techniques for the knowledge of moisture distribution inside the walls and the humidity origin. North and south oriented sections, both on walls and floors, were evaluated and also a general inspection in the church was carried out with different non-invasive techniques. This methodology implies different monitoring stages for a complete knowledge of the implication of outdoors and indoors conditions on the moisture distribution. Each technique is evaluated according to its effectiveness in the detection of decay processes and maintenance costs. Research funded by Geomateriales (S2013/MIT-2914) and Deterioration of stone materials in the interior of historic buildings as a result induced variation of its microclimate (CGL2011-27902) projects. The cooperation received from the Complutense University of Madrid's Research Group Alteración y Conservación de los Materiales Pétreos del Patrimonio (ref. 921349), the Laboratory Network in Science and Technology for Heritage Conservation (RedLabPat, CEI Moncloa) and the Diocese of Alcalá is gratefully acknowledged. MI Martínez-Garrido and M. Gomez-Heras are funded by Moncloa Campus of International Excellence (UPM-UCM, CSIC) PICATA fellowships.

Databases for Assessment of Military Speech Technology Equipment. (les Bases de donnees pour l’evatuation des equipements de technologie vocale militaire)

DTIC Science & Technology

2000-03-01

Prieur de la Crte d’Or Ciudad Universitaria 94114 Arcueil Cedex 28040 Madrid France Spain Mr. John J. Grieco Dr. Dough Reynolds AFRL/IFEC Information...CANADA HONGRIE PORTUGAL Directeur - Recherche et d~veloppement - Department for Scientific Estado Maior da Forqa Afrea Communications et gestion de

Quality ILL Service in the Network of CSIC Libraries: Five Years of Progress.

ERIC Educational Resources Information Center

Malo de Molina y Martin-Montalvo, Teresa; Quintana Martinez, Isabel

1997-01-01

Although Spanish interlibrary loans (ILL) have increased from 100 to 525 per 100,000 inhabitants, there are still many problems to resolve. Examines a plan developed by the Consejo Superior de Investigaciones Cientificas (CSIC) Library Network to improve ILL services. Provides a comparative analysis of ILL services from 1992-1995. Includes charts…

Grinding, Machining Morphological Studies on C/SiC Composites

NASA Astrophysics Data System (ADS)

Xiao, Chun-fang; Han, Bing

2018-05-01

C/SiC composite is a typical material difficult to machine. It is hard and brittle. In machining, the cutting force is large, the material removal rate is low, the edge is prone to collapse, and the tool wear is serious. In this paper, the grinding of C/Si composites material along the direction of fiber distribution is studied respectively. The surface microstructure and mechanical properties of C/SiC composites processed by ultrasonic machining were evaluated. The change of surface quality with the change of processing parameters has also been studied. By comparing the performances of conventional grinding and ultrasonic grinding, the surface roughness and functional characteristics of the material can be improved by optimizing the processing parameters.

Modeling the Tensile Behavior of Cross-Ply C/SiC Ceramic-Matrix Composites

NASA Astrophysics Data System (ADS)

Li, L. B.; Song, Y. D.; Sun, Y. C.

2015-07-01

The tensile behavior of cross-ply C/SiC ceramic-matrix composites (CMCs) at room temperature has been investigated. Under tensile loading, the damage evolution process was observed with an optical microscope. A micromechanical approach was developed to predict the tensile stress-strain curve, which considers the damage mechanisms of transverse multicracking, matrix multicracking, fiber/matrix interface debonding, and fiber fracture. The shear-lag model was used to describe the microstress field of the damaged composite. By combining the shear-lag model with different damage models, the tensile stress-strain curve of cross-ply CMCs corresponding to each damage stage was modeled. The predicted tensile stress-strain curves of cross-ply C/SiC composites agreed with experimental data.

Temperature Dependence on the Strength and Stress Rupture Behavior of a Carbon-Fiber Reinforced Silicon Carbide (C/SiC) Composite

NASA Technical Reports Server (NTRS)

Verrilli, Michael J.; Calomino, Anthony

2002-01-01

Tensile strengths and stress rupture lives of carbon-fiber reinforced silicon carbide (C/SiC) specimens were measured at 800 C and are compared to previously reported 1200 C data. All tests were conducted in an environmental chamber containing 1000 ppm of oxygen in argon. The average 800 C tensile strength of 610 MPa is 10% greater than at 1200 C. Average stress rupture lives at 800 C were 2.5 times longer than those obtained at 1200 C. The difference in the 800 and 1200 C lives is related to the oxidation rate of the reinforcing carbon fibers, which is the primary damage mode of C/SiC composites in oxygen-containing environments.

Event processing in X-IFU detector onboard Athena.

NASA Astrophysics Data System (ADS)

Ceballos, M. T.; Cobos, B.; van der Kuurs, J.; Fraga-Encinas, R.

2015-05-01

The X-ray Observatory ATHENA was proposed in April 2014 as the mission to implement the science theme "The Hot and Energetic Universe" selected by ESA for L2 (the second Large-class mission in ESA's Cosmic Vision science programme). One of the two X-ray detectors designed to be onboard ATHENA is X-IFU, a cryogenic microcalorimeter based on Transition Edge Sensor (TES) technology that will provide spatially resolved high-resolution spectroscopy. X-IFU will be developed by a consortium of European research institutions currently from France (leadership), Italy, The Netherlands, Belgium, UK, Germany and Spain. From Spain, IFCA (CSIC-UC) is involved in the Digital Readout Electronics (DRE) unit of the X-IFU detector, in particular in the Event Processor Subsytem. We at IFCA are in charge of the development and implementation in the DRE unit of the Event Processing algorithms, designed to recognize, from a noisy signal, the intensity pulses generated by the absorption of the X-ray photons, and lately extract their main parameters (coordinates, energy, arrival time, grade, etc.) Here we will present the design and performance of the algorithms developed for the event recognition (adjusted derivative), and pulse grading/qualification as well as the progress in the algorithms designed to extract the energy content of the pulses (pulse optimal filtering). IFCA will finally have the responsibility of the implementation on board in the (TBD) FPGAs or micro-processors of the DRE unit, where this Event Processing part will take place, to fit into the limited telemetry of the instrument.

Evaluation of automated image analysis software for the detection of diabetic retinopathy to reduce the ophthalmologists' workload.

PubMed

Soto-Pedre, Enrique; Navea, Amparo; Millan, Saray; Hernaez-Ortega, Maria C; Morales, Jesús; Desco, Maria C; Pérez, Pablo

2015-02-01

To assess the safety and workload reduction of an automated 'disease/no disease' grading system for diabetic retinopathy (DR) within a systematic screening programme. Single 45° macular field image per eye was obtained from consecutive patients attending a regional primary care based DR screening programme in Valencia (Spain). The sensitivity and specificity of automated system operating as 'one or more than one microaneurysm detection for disease presence' grader were determined relative to a manual grading as gold standard. Data on age, gender and diabetes mellitus were also recorded. A total of 5278 patients with diabetes were screened. The median age and duration of diabetes was 69 years and 6.9 years, respectively. Estimated prevalence of DR was 15.6%. The software classified 43.9% of the patients as having no DR and 26.1% as having ungradable images. Detection of DR was achieved with 94.5% sensitivity (95% CI 92.6- 96.5) and 68.8% specificity (95%CI 67.2-70.4). The overall accuracy of the automated system was 72.5% (95%CI 71.1-73.9). The present retinal image processing algorithm that can act as prefilter to flag out images with pathological lesions can be implemented in practice. Our results suggest that it could be considered when implementing DR screening programmes. © 2014 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

An application of eddy current damping effect on single point diamond turning of titanium alloys

NASA Astrophysics Data System (ADS)

Yip, W. S.; To, S.

2017-11-01

Titanium alloys Ti6Al4V (TC4) have been popularly applied in many industries. They have superior material properties including an excellent strength-to-weight ratio and corrosion resistance. However, they are regarded as difficult to cut materials; serious tool wear, a high level of cutting vibration and low surface integrity are always involved in machining processes especially in ultra-precision machining (UPM). In this paper, a novel hybrid machining technology using an eddy current damping effect is firstly introduced in UPM to suppress machining vibration and improve the machining performance of titanium alloys. A magnetic field was superimposed on samples during single point diamond turning (SPDT) by exposing the samples in between two permanent magnets. When the titanium alloys were rotated within a magnetic field in the SPDT, an eddy current was generated through a stationary magnetic field inside the titanium alloys. An eddy current generated its own magnetic field with the opposite direction of the external magnetic field leading a repulsive force, compensating for the machining vibration induced by the turning process. The experimental results showed a remarkable improvement in cutting force variation, a significant reduction in adhesive tool wear and an extreme long chip formation in comparison to normal SPDT of titanium alloys, suggesting the enhancement of the machinability of titanium alloys using an eddy current damping effect. An eddy current damping effect was firstly introduced in the area of UPM to deliver the results of outstanding machining performance.

Lifestyle factors and dietary intake of Iranian postgraduate students in Universiti Putra Malaysia (UPM)

PubMed Central

Zarei, Maryam; Taib, Mohd Nasir Mohd; Zarei, Fatemeh

2013-01-01

Background: A student’s lifestyle can change notably in a foreign country. The objective of this study was to determine factors associated with the body weight status of Iranian postgraduate students in Universiti Putra Malaysia (UPM) 2009. Methods: A self-administered questionnaire was administered to 210 Iranian postgraduate students at UPM. Anthropometric factors also were measured using standard procedures. Body mass index (BMI) and waist-to-hip ratio (WHR) also were calculated. The chi-squared test, Spearman’s rho, and the Pearson product-moment correlation coefficient were used to determine the associations between the variables that were studied. Multiple linear regression analysis was used to measure the amount of influence a predictor variable had on a outcome variable. Results: There was no significant correlation between nutritional knowledge (P > 0.05), weight-management knowledge (P > 0.05), and smoking (P > 0.05) and BMI. There were statistically significant correlations between gender (P < 0.01), physical activity (P < 0.05), protein (P < 0.01), carbohydrate (P < 0.01), fat (P < 0.01), fiber (P < 0.01), vitamin C (P < 0.05), calcium (P < 0.01), and iron (P < 0.01) and BMI. There were also relationships between body fat (P < 0.01), waist circumference (P < 0.01), hip circumference (P < 0.01) and WHR (P < 0.01) and BMI. Conclusion: Our findings showed the need for a nutrition promotion program for the Iranian students to help them change their negative food habits and improve their lifestyles. PMID:26120404

Bamboo-like 3C-SiC nanowires with periodical fluctuating diameter: Homogeneous synthesis, synergistic growth mechanism, and their luminescence properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Meng; Zhao, Jian; Li, Zhenjiang, E-mail: zhenjiangli@qust.edu.cn

Herein, bamboo-like 3C-SiC nanowires have been successfully fabricated on homogeneous 6H-SiC substrate by a simple chemical vapor reaction (CVR) approach. The obtained 3C-SiC nanostructure with periodical fluctuating diameter, is composed of two alternating structure units, the typical normal-sized stem segment with perfect crystallinity and obvious projecting nodes segment having high-density stacking faults. The formation of the interesting morphology is significantly subjected to the peculiar growth condition provided by the homogeneous substrate as well as the varying growth elastic energy. Furthermore, the photoluminescence (PL) performance measured on the bamboo-like SiC nanowire shows an intensive emission peaks centered at 451 nm andmore » 467 nm, which has been expected to make a positive progress toward the optical application of the SiC-based one-dimensional (1D) nanostructures, such as light emission diode (LED). - Graphical abstract: Based on the synergistic growth mechanism from homogeneous substrate and elastic energy, bamboo-like 3C-SiC nanowires with periodically fluctuating diameter have been synthesized on 6H-SiC. The blue-violet light emission properties of the bamboo-like nanowires have also been investigated for exploring their peculiar optical application. - Highlights: • Bamboo-like 3C-SiC nanowires with periodically fluctuating diameter have been synthesized on 6H-SiC. • A synergistic growth mechanism from homogeneous substrate and elastic energy has been proposed firstly. • The blue-violet light emission properties of the products displayed peculiar optical application.« less

NDVI statistical distribution of pasture areas at different times in the Community of Madrid (Spain)

NASA Astrophysics Data System (ADS)

Martín-Sotoca, Juan J.; Saa-Requejo, Antonio; Díaz-Ambrona, Carlos G. H.; Tarquis, Ana M.

2015-04-01

The severity of drought has many implications for society, including its impacts on the water supply, water pollution, reservoir management and ecosystem. However, its impacts on rain-fed agriculture are especially direct. Because of the importance of drought, there have been many attempts to characterize its severity, resulting in the numerous drought indices that have been developed (Niemeyer 2008). 'Biomass index' based on satellite image derived Normalized Difference Vegetation Index (NDVI) has been used in countries like United States of America, Canada and Spain for pasture and forage crops for some years (Rao, 2010). This type of agricultural insurance is named as 'index-based insurance' (IBI). IBI is perceived to be substantially less costly to operate and manage than multiple peril insurance. IBI contracts pay indemnities based not on the actual yield (or revenue) losses experienced by the insurance purchaser but rather based on realized NDVI values (historical data) that is correlated with farm-level losses (Xiaohui Deng et al., 2008). Definition of when drought event occurs is defined on NDVI threshold values mainly based in statistical parameters, average and standard deviation that characterize a normal distribution. In this work a pasture area at the north of Community of Madrid (Spain) has been delimited. Then, NDVI historical data was reconstructed based on remote sensing imaging MODIS, with 500x500m2 resolution. A statistical analysis of the NDVI histograms at consecutives 46 intervals of that area was applied to search for the best statistical distribution based on the maximum likelihood criteria. The results show that the normal distribution is not the optimal representation when IBI is available; the implications in the context of crop insurance are discussed (Martín-Sotoca, 2014). References Kolli N Rao. 2010. Index based Crop Insurance. Agriculture and Agricultural Science Procedia 1, 193-203. Martín-Sotoca, J.J. (2014) Estructura Espacial de la Sequía en Pastos y sus Aplicaciones en el Seguro Agrario. Master Thesis, UPM (In Spanish). Niemeyer, S., 2008: New drought indices. First Int. Conf. on Drought Management: Scientific and Technological Innovations, Zaragoza, Spain, Joint Research Centre of the European Commission. [Available online at http://www.iamz.ciheam.org/medroplan/zaragoza2008/Sequia2008/Session3/S.Niemeyer.pdf.] Xiaohui Deng, Barry J. Barnett, Gerrit Hoogenboom, Yingzhuo Yu and Axel Garcia y Garcia 2008. Alternative Crop Insurance Indexes. Journal of Agricultural and Applied Economics, 40(1), 223-237. Acknowledgements First author acknowledges the Research Grant obtained from CEIGRAM in 2014

Comet 67P as seen by Rosetta/OSIRIS

NASA Astrophysics Data System (ADS)

Guettler, Carsten; Sierks, Holger; Barbieri, Cesare; Lamy, Philippe L.; Rodrigo, Rafael; Koschny, Detlef; Rickman, Hans; OSIRIS Team

2016-10-01

In September 2016, the ESA Rosetta mission will come to its ending. Having escorted comet 67P for more than two years, the scientific camera system OSIRIS onboard Rosetta witnessed all important milestones of the mission: after the first characterization and the Philae landing we saw the comet's activity increasing while it was approaching the Sun. During the peak of activity around perihel in August 2015, the spacecraft had to retreat to a safe distance but we witnessed strong but predictable jet activity and, at the same time, short lived eruptions, some of these being big outbursts. When the activity declined post perihelion and allowed the spacecraft to go back closer, comparison with the early characterization revealed numerous morphologic changes on the surface, which can be attributed to the strong activity during perihelion passage.The paper will give an overview of latest OSIRIS science and discoveries including the morphology, activity, and surface changes mentioned above. Implications on the nature of the comet and its mechanisms will be drawn from these. The current plan for the mission is to go to very close distances in August and September 2016 and finally land the spacecraft on 67P.Acknowledgements: OSIRIS was built by a consortium led by the Max-Planck-Institut für Sonnensystemforschung, Göttingen, Germany, in collaboration with CISAS, University of Padova, Italy, the Laboratoire d'Astrophysique de Marseille, France, the Instituto de Astrofísica de Andalucia, CSIC, Granada, Spain, the Scientific Support Office of the European Space Agency, Noordwijk, The Netherlands, the Instituto Nacional de Técnica Aeroespacial, Madrid, Spain, the Universidad Politéchnica de Madrid, Spain, the Department of Physics and Astronomy of Uppsala University, Sweden, and the Institut für Datentechnik und Kommunikationsnetze der Technischen Universität Braunschweig, Germany.We thank the Rosetta Science Ground Segment at ESAC, the Rosetta Mission Operations Centre at ESOC and the Rosetta Project at ESTEC for their outstanding work enabling the science return of the Rosetta Mission.

All-Manganite Tunnel Junctions with Interface-Induced Barrier Magnetism

NASA Astrophysics Data System (ADS)

Sefrioui, Zouhair

2011-03-01

The recent discovery of several unexpected phases at complex oxide interfaces is providing new insights into the physics of strongly correlated electron systems. The possibility of tailoring the electronic structure of such interfaces has triggered a great technological drive to functionalize them into devices. In this communication, we describe an alternative strategy to produce spin filtering by inducing a ferromagnetic insulating state in an ultrathin antiferromagnetic layer in contact with a ferromagnetic layer. This artificially induced spin filtering persists up to relatively high temperatures and operates at high applied bias voltages. The results suggest that after playing a key role in exchange-bias for spin-valves, uncompensated moments at engineered antiferromagnetic interfaces represent a novel route for generating highly spin-polarized currents with antiferromagnets. Work done in collaboration with M. Bibes, C. Carrétéro, A. Barthélémy (Unité Mixte de Physique CNRS/Thales, Campus de Polytechnique, 1, Avenue A. Fresnel, 91767 Palaiseau (France) and Université Paris-Sud, 91045 Orsay (France)), F.A. Cuellar, C. Visani, A. Rivera-Calzada, , C. León, J. Santamaria (Grupo de Física de Materiales Complejos, Universidad Complutense de Madrid, 28040 Madrid (Spain)), M.J. Calderón, L. Brey (Instituto de Ciencia de Materiales de Madrid, CSIC, Cantoblanco, 28049 Madrid (Spain)), K. March, M. Walls, D. Imhoff (Laboratoire de Physique des Solides, CNRS, Université Paris-Sud, 91405 Orsay (France)), R. Lopez Anton, T.R. Charlton (ISIS, Rutherford Appleton Laboratory, Chilton, Oxon OX11 0QX (United Kingdom)), E. Iborra (Universidad Politécnica de Madrid, Escuela Técnica Superior de Ingenieros de Telecomunicaciones, 28040 Madrid (Spain)), F. Ott (Léon Brillouin, CEA/CNRS, UMR 12, 91191 Gif-sur-Yvette (France)). This work was supported by the Spanish Ministry for Science and Education programs MAT2008 06517, and the Réseau Thématique de Recherche Avancée (RTRA) ``Triangle de la Physique.''

Fiber Optic High Temperature Sensors for Re-Entry Vehicles

NASA Astrophysics Data System (ADS)

Haddad, E.; Kruzelecky, R.; Zou, J.; Wong, B.; Jamroz, W.; Sayeed, F.; Muylaert, J.-M.; McKenzie, I.

2009-01-01

MPB, within an ESA contract, is developing high temperature Fiber sensors (up to 1100°C) for re- ntry experiments, with direct application to the Thermo Protection Surface (TPS) of SHEFEX II. It addresses the challenges of obtaining high reflectivity FBG sensors, and integrating the fiber sensors within the selected TPS host material (C/SiC). Feasibility was demonstrated using free fiber sensors that showed the formation of the Chemical Composition Grating (CCG), with 80 % reflection at temperatures >750°C. The CCG grating was stable at high temperature (1000°C) for more than 50 hours, as well as after cycling between room temperature and 1000°C, with better than 0.5 % temperature accuracy (FBG central wavelength). Small FBG sensor packages were prepared and attached to C/SiC tiles. The calibration of the packaged fibers showed similar response to temperature as the free fiber sensor. The fiber sensor package was designed to maximize contact with the C/SiC surface to provide fast response to transients. Three- imension modeling with Ansys finite element analysis shows a time constant of 15-20 ms to reach 1200°C. A modular design will be implemented where a dedicated fiber line with 3 sensors and its own connector is used for each C/SiC tile. Small coupons of packaged sensors attached to C/SiC tiles will be tested in a re-entry environment at Von Karman Institute (Belgium) In a recently completed project with ESA, MPB developed and ground qualified a fiber sensor network, the "Fiber Sensor Demonstrator", that was successfully integrated as a payload with ESA's Proba-2. The system includes a central interrogation system that can be used to measure multiple parameters including a high temperature sensor for the Proba-2 thruster (up to 500°C).

rPM6 parameters for phosphorous and sulphur-containing open-shell molecules

NASA Astrophysics Data System (ADS)

Saito, Toru; Takano, Yu

2018-03-01

In this article, we have introduced a reparameterisation of PM6 (rPM6) for phosphorus and sulphur to achieve a better description of open-shell species containing the two elements. Two sets of the parameters have been optimised separately using our training sets. The performance of the spin-unrestricted rPM6 (UrPM6) method with the optimised parameters is evaluated against 14 radical species, which contain either phosphorus or sulphur atom, comparing with the original UPM6 and the spin-unrestricted density functional theory (UDFT) methods. The standard UPM6 calculations fail to describe the adiabatic singlet-triplet energy gaps correctly, and may cause significant structural mismatches with UDFT-optimised geometries. Leaving aside three difficult cases, tests on 11 open-shell molecules strongly indicate the superior performance of UrPM6, which provides much better agreement with the results of UDFT methods for geometric and electronic properties.

Effects of collision cascade density on radiation defect dynamics in 3C-SiC

PubMed Central

Bayu Aji, L. B.; Wallace, J. B.; Kucheyev, S. O.

2017-01-01

Effects of the collision cascade density on radiation damage in SiC remain poorly understood. Here, we study damage buildup and defect interaction dynamics in 3C-SiC bombarded at 100 °C with either continuous or pulsed beams of 500 keV Ne, Ar, Kr, or Xe ions. We find that bombardment with heavier ions, which create denser collision cascades, results in a decrease in the dynamic annealing efficiency and an increase in both the amorphization cross-section constant and the time constant of dynamic annealing. The cascade density behavior of these parameters is non-linear and appears to be uncorrelated. These results demonstrate clearly (and quantitatively) an important role of the collision cascade density in dynamic radiation defect processes in 3C-SiC. PMID:28304397

International Conference on Natural Orifice Transluminal Endoscopic Surgery (NOTES)

DTIC Science & Technology

2006-06-01

causing evisceration. At exploration, a pancreatic stump leak also was noted. Drains were placed, and the patient was placed on total parenteral nutrition ...Department of Surgery. St. Joseph Clinic. Liege, Belgium Hospital Dr. Peset Aleixandre. Valencia. Spain 4 Clinica de Merida. Merida. Yucatan ...pneumonitis (n = 3), and parenteral nutrition (n = 1). There was conversion to laparotomy for 28 patients (2.7%), and surgical time ranged from 32 to 132

Research in Applied Mathematics Related to Nonlinear System Theory.

DTIC Science & Technology

1985-08-01

This list includes A. OZGULER, P. KHARGONEKAR, J. RIBERA , and T. GEORGIOU. Also supported was the Principal Investigator (partial summer support only...regulator problem with internal stability", Ph.D. dissertation, University of Florida, 63 pages. J. RIBERA [1982] "Identification of linear relations... Ribera , doctoral student (now on faculty of I. E. S. E., Barcelona, SPAIN) Dr. A. Tannenbaum, Visiting Professor (partial summer support only, now

FIRST-PRINCIPLES CALCULATIONS OF CHARGE STATES AND FORMATION ENERGIES OF Mg, Al, and Be TRANSMUTANTS IN 3C-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Shenyang Y.; Setyawan, Wahyu; Jiang, Weilin

2014-08-28

The Vienna Ab-initio Simulation Package (VASP) is employed to calculate charge states and the formation energies of Mg, Al and Be transmutants at different lattice sites in 3C-SiC. The results provide important information on the dependence of the most stable charge state and formation energy of Mg, Al, Be and vacancies on electron potentials.

Investigations of 3C-SiC inclusions in 4H-SiC epilayers on 4H-SiC single crystal substrates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Si, W.; Dudley, M.; Kong, H.S.

1997-03-01

Synchrotron white beam x-ray topography (SWBXT) and Nomarski optical microscopy (NOM) have been used to characterize 4H-SiC epilayers and to study the character of triangular inclusions therein. 4H-SiC substrates misoriented by a range of angles from (0001), as well as (1 1{bar 0}0) and (11 2{bar 0}) oriented substrates were used. No evidence was found for the nucleation of 3C-SiC inclusions at superscrew dislocations (along the [0001] axis) in the 4H-SiC substrates. Increasing the off-axis angle of the substrates from 3.5 to 6.5{degree} was found to greatly suppress the formation of the triangular inclusions. In the case of substrates misorientedmore » by 8.0{degree} from (0001) toward [112{bar 0}], the triangular inclusions were virtually eliminated. The crystalline quality of 4H-SiC epilayers grown on the substrates misoriented by 8.0{degree} from (0001) was very good. For the (11{bar 0}0) and (112{bar 0}) samples, there is no indication of 3C-SiC inclusions in the epilayers. Possible formation mechanisms and the morphology of 3C-SiC inclusions are discussed. 17 refs., 13 figs.« less

Grain growth of nanocrystalline 3C-SiC under Au ion irradiation at elevated temperatures

NASA Astrophysics Data System (ADS)

Zhang, Limin; Jiang, Weilin; Dissanayake, Amila; Varga, Tamas; Zhang, Jiandong; Zhu, Zihua; Hu, Dehong; Wang, Haiyan; Henager, Charles H., Jr.; Wang, Tieshan

2016-01-01

Nanocrystalline silicon carbide (SiC) represents an excellent model system for a fundamental study of interfacial (grain boundary) processes under nuclear radiation, which are critical to the understanding of the response of nanostructured materials to high-dose irradiation. This study reports on a comparison of irradiation effects in cubic phase SiC (3C-SiC) grains of a few nanometres in size and single-crystal 3C-SiC films under identical Au ion irradiation to a range of doses at 700 K. In contrast to the latter, in which the lattice disorder is accumulated to a saturation level without full amorphization, the average grain size of the former increases with dose following a power-law trend. In addition to coalescence, the grain grows through atomic jumps and mass transport, where irradiation-induced vacancies at grain boundaries assist the processes. It is found that a higher irradiation temperature leads to slower grain growth and a faster approach to a saturation size of SiC nanograins. This unusual behaviour could be associated with irradiation-induced grain nucleation and growth in amorphous SiC matrix in which the 3C-SiC grains are embedded. The results could potentially have a positive impact on structural components of advanced nuclear energy systems.

Application of alternative fixatives to formalin in diagnostic pathology

PubMed Central

Gatta, L. Benerini; Cadei, M.; Balzarini, P.; Castriciano, S.; Paroni, R.; Verzeletti, A.; Cortellini, V.; De Ferrari, F.; Grigolato, P.

2012-01-01

Fixation is a critical step in the preparation of tissues for histopathology. The aim of this study was to investigate the effects of different fixatives vs formalin on proteins and DNA, and to evaluate alternative fixation for morphological diagnosis and nucleic acid preservation for molecular methods. Forty tissues were fixed for 24 h with six different fixatives: the gold standard fixative formalin, the historical fixatives Bouin and Hollande, and the alternative fixatives Greenfix, UPM and CyMol. Tissues were stained (Haematoxylin-Eosin, Periodic Acid Schiff, Trichromic, Alcian-blue, High Iron Diamine stainings), and their antigenicity was determined by immunohistochemistry (performed with PAN-CK, CD31, Ki-67, S100, CD68, AML antibodies). DNA extraction, KRAS sequencing, FISH for CEP-17, and flow cytometry analysis of nuclear DNA content were applied. For cell morphology the alternative fixatives (Greenfix, UPM, CyMol) were equivalent to formalin. As expected, Hollande proved to be the best fixative for morphology. The morphology obtained with Bouin was comparable to the one with formalin. Hollande was the best fixative for histochemistry. Bouin proved to be equivalent to formalin. The alternative fixatives were equivalent to formalin, although with greater variability in haematoxylin-eosin staining. It proved the possibility to obtain immunohistochemical staining largely equivalent to that following formalin-fixation with the following fixatives: Greenfix, Hollande, UPM and CyMol. The tissues fixed in Bouin did not provide results comparable to those obtained with formalin. The DNA extracted from samples fixed with alternative fixatives was found to be suitable for molecular analysis. PMID:22688293

[Scientific writing, scientific communication and open access: an international, multidisciplinary project--NECOBELAC].

PubMed

Pulido, Diony; Robledo, Rocío; Agudelo, Carlos A

2009-01-01

A collaboration network involving 6 countries in Europe, Latin-America and the Caribbean has embarked on a project (Network of Collaboration Between Europe and Latin American Caribbean Countries-NECOBELAC; www.necobelac.eu) aimed at improving scientific writing open access and scholarly communication to spread know-how regarding current and future issues and information related to health. The NECOBELAC project is sponsored by the European Community (7th Framework Programme) and will last for 3 years. The project recognises the challenge arising from socio-cultural differences between the participating countries and will deal with generating networks involving institutions working in close collaboration for carrying out training and know-how exchange programmes aimed at producing open access information and spreading it (including technical and ethical aspects). The NECOBELAC project currently involves the Istituto Superiore di Sanità - ISS from Italy (coordinating the project), the Consejo Superior de Investigaciones Científicas (CSIC) from Spain, the University of Nottingham (SHERPA) from the United Kingdom, BIREME from Brazil, the Instituto de Salud Pública (ISP) from Colombia and the Universidade de Minho from Portugal.

Monte Carlo study of the hetero-polytypical growth of cubic on hexagonal silicon carbide polytypes

NASA Astrophysics Data System (ADS)

Camarda, Massimo

2012-08-01

In this article we use three dimensional kinetic Monte Carlo simulations on super-lattices to study the hetero-polytypical growth of cubic silicon carbide polytype (3C-SiC) on misoriented hexagonal (4H and 6H) substrates. We analyze the quality of the 3C-SiC film varying the polytype, the miscut angle and the initial surface morphology of the substrate. We find that the use of 6H misoriented (4°-10° off) substrates, with step bunched surfaces, can strongly improve the quality of the cubic epitaxial film whereas the 3C/4H growth is affected by the generation of dislocations, due to the incommensurable periodicity of the 3C (3) and the 4H (4) polytypes. For these reasons, a proper pre-growth treatment of 6H misoriented substrates can be the key for the growth of high quality, twin free, 3C-SiC films.

Tension-Tension Fatigue Behavior of Unidirectional C/Sic Ceramic-Matrix Composite at Room Temperature and 800 °C in Air Atmosphere

PubMed Central

Li, Longbiao

2015-01-01

The tension-tension fatigue behavior of unidirectional C/SiC ceramic-matrix composite at room temperature and 800 °C under air has been investigated. The fatigue hysteresis modulus and fatigue hysteresis loss energy corresponding to different number of applied cycles have been analyzed. The fatigue hysteresis loops models for different interface slip cases have been derived based on the fatigue damage mechanism of fiber slipping relative to matrix in the interface debonded region upon unloading and subsequent reloading. The fiber/matrix interface shear stress has been estimated for different numbers of applied cycles. By combining the interface shear stress degradation model and fibers strength degradation model with fibers failure model, the tension-tension fatigue life S-N curves of unidirectional C/SiC composite at room temperature and 800 °C under air have been predicted.

A Partially Saturated Constitutive Theory for Compacted Fills

DTIC Science & Technology

2004-06-01

degree of Doctor of Philosophy. COL James R. Rowan, EN , was Commander and Executive Director of ERDC, and Dr. James R. Houston was Director. CHAPTER...Reconsolidation Index CR Slope of the reconsolidation line Maximum Friction Angle of3 Friction Angle PHILIM traMaterial Ratio of minimum to maximum4 Phi Ratio PH ...Josa, A., (1988). "Un modelo elastoplastico para suelos no saturados," Tesis Doctorae, Universitat Politecnica de Catalunya, Barcelons, Spain. Lawton

aGEM: an integrative system for analyzing spatial-temporal gene-expression information

PubMed Central

Jiménez-Lozano, Natalia; Segura, Joan; Macías, José Ramón; Vega, Juanjo; Carazo, José María

2009-01-01

Motivation: The work presented here describes the ‘anatomical Gene-Expression Mapping (aGEM)’ Platform, a development conceived to integrate phenotypic information with the spatial and temporal distributions of genes expressed in the mouse. The aGEM Platform has been built by extending the Distributed Annotation System (DAS) protocol, which was originally designed to share genome annotations over the WWW. DAS is a client-server system in which a single client integrates information from multiple distributed servers. Results: The aGEM Platform provides information to answer three main questions. (i) Which genes are expressed in a given mouse anatomical component? (ii) In which mouse anatomical structures are a given gene or set of genes expressed? And (iii) is there any correlation among these findings? Currently, this Platform includes several well-known mouse resources (EMAGE, GXD and GENSAT), hosting gene-expression data mostly obtained from in situ techniques together with a broad set of image-derived annotations. Availability: The Platform is optimized for Firefox 3.0 and it is accessed through a friendly and intuitive display: http://agem.cnb.csic.es Contact: natalia@cnb.csic.es Supplementary information: Supplementary data are available at http://bioweb.cnb.csic.es/VisualOmics/aGEM/home.html and http://bioweb.cnb.csic.es/VisualOmics/index_VO.html and Bioinformatics online. PMID:19592395

Fabrication of a bionic microstructure on a C/SiC brake lining surface: Positive applications of surface defects for surface wetting control

NASA Astrophysics Data System (ADS)

Wu, M. L.; Ren, C. Z.; Xu, H. Z.; Zhou, C. L.

2018-05-01

The material removal processes generate interesting surface topographies, unfortunately, that was usually considered to be surface defects. To date, little attention has been devoted to the positive applications of these interesting surface defects resulted from laser ablation to improve C/SiC surface wettability. In this study, the formation mechanism behind surface defects (residual particles) is discussed first. The results showed that the residual particles with various diameters experienced regeneration and migration, causing them to accumulate repeatedly. The effective accumulation of these residual particles with various diameters provides a new method about fabricating bionic microstructures for surface wetting control. The negligible influence of ablation processes on the chemical component of the subsurface was studied by comparing the C-O-Si weight percentage at the C/SiC subsurface. A group of microstructures were fabricated under different laser trace and different laser parameters. Surface wettability experimental results for different types of microstructures were compared. The results showed that the surface wettability increased as the laser scanning speed decreased. The surface wettability increased with the density of the laser scanning trace. We also demonstrated the application of optimized combination of laser parameters and laser trace to simulate a lotus leaf's microstructure on C/SiC surfaces. The parameter selection depends on the specific material properties.

7th IGRSM International Remote Sensing & GIS Conference and Exhibition

NASA Astrophysics Data System (ADS)

Shariff, Abdul Rashid Mohamed

2014-06-01

IGRSM This proceedings consists of the peer-reviewed papers from the 7th IGRSM International Conference and Exhibition on Remote Sensing & GIS (IGRSM 2014), which was held on 21-22 April 2014 at Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. The conference, with the theme Geospatial Innovation for Nation Building was aimed at disseminating knowledge, and sharing expertise and experiences in geospatial sciences in all aspects of applications. It also aimed to build linkages between local and international professionals in this field with industries. Highlights of the conference included: Officiation by Y B Datuk Dr Abu Bakar bin Mohamad Diah, Deputy Minister of Minister of Science, Technology & Innovation Keynote presentations by: Associate Professor Dr Francis Harvey, Chair of the Geographic Information Science Commission at the International Geographical Union (IGU) and Director of U-Spatial, University of Minnesota, US: The Next Age of Discovery and a Future in a Post-GIS World. Professor Dr Naoshi Kondo, Bio-Sensing Engineering, University of Kyoto, Japan: Mobile Fruit Grading Machine for Precision Agriculture. Datuk Ir Hj Ahmad Jamalluddin bin Shaaban, Director-General, National Hydraulic Research Institute of Malaysia (NAHRIM), Malaysia: Remote Sensing & GIS in Climate Change Analyses. Oral and poster presentations from 69 speakers, from both Malaysia (35) and abroad (34), covering areas of water resources management, urban sprawl & social mobility, agriculture, land use/cover mapping, infrastructure planning, disaster management, technology trends, environmental monitoring, atmospheric/temperature monitoring, and space applications for the environment. Post-conference workshops on: Space Applications for Environment (SAFE), which was be organised by the Japan Aerospace Exploration Agency (JAXA) Global Positioning System (GPS) Receiver Evaluation Using GPS Simulation, which was be organised by the Science & Technology Research Institute for Defence (STRIDE), and sponsored by RFI Technologies Sdn. Bhd. and Aeroflex Inc. Two awards were presented by Dr Noordin Ahmad, Director-General of the National Space Agency during the conference's closing ceremony: Best Paper Award: Dr Rizatus Shofiyati, Indonesian Center for Agricultural Land Resources Research and Development (ICALRD), Indonesia: Indonesian Drought Monitoring from Space. A Report of SAFE Activity: Assessment of Drought Impact on Rice Production in Indonesia by Satellite Remote Sensing and Dissemination with Web-GIS Best Student Paper Award: Rosnani Rahman, Space Science Centre (ANGKASA), Institute of Climate Change, Universiti Kebangsaan Malaysia (UKM), Malaysia: Monitoring the Variability of Precipitable Water Vapor Over the Klang Valley, Malaysia During Flash Flood The success of the IGRSM 2014 was due to commitments of many: authors, keynote speakers, session chairpersons, the organising and technical programme committees, student volunteers from Universiti Putra Malaysia (UPM), and many others of various roles. We acknowledge the sponsors of IGRSM 2014, namely Antaragrafik Systems Sdn. Bhd. and Geospatial Media and Communications Sdn. Bhd. We also thank all exhibitors and contributors: E J Motiwalla, Fajar Saintifik Sdn. Bhd., Bandwork GPS Solutions Sdn. Bhd., Tenaga Nasional Bhd., TSKAY Technology Sdn. Bhd., Geo Spatial Solutions Sdn. Bhd. and Accutac Sdn. Bhd. Associate Professor Sr Dr Abdul Rashid Mohamed Shariff Chairman 7th IGRSM International Remote Sensing & GIS Conference and Exhibition (IGRSM2014) President Institution of Geospatial and Remote Sensing Malaysia (IGRSM), 2012-2014

Study of movement of the western and central belts of Peninsular Malaysia using GPS data analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramli, Siti Hafizah; Samsudin, Abdul Rahim

Since the large earthquakes in Sumatera and Nias, there were some tremors incidents at Bukit Tinggi. Therefore, a study on the earth’s crust movement and the effects of the earthquake in Indonesia on the tectonic blocks of Peninsular Malaysia have been carried out using GPS data analysis. GPS data from five MyRTKnet stations within Peninsular Malaysia have been analyzed to monitor the movement of two major tectonic blocks of Peninsular Malaysia which are the western belt represented by the Behrang (BEHR) and UPM Serdang (UPMS) stations and the central belt represented by Bentong (BENT), Jerantut (JRNT) and Temerloh (TLOH) stations.more » GPS data recorded from 2005 to 2010 were analysed based on horizontal and vertical displacements of the respective stations by using Trimble Business Centre (TBC) software. Based on the results of accumulated displacements of recorded GPS data from January 2006 to December 2013, it shows that the western belt which represented by UPMS has shifted 0.096m towards northwest with changes of ellipsoidal height of +0.030m while the central belt which represented by TLOH has shifted 0.080m towards northwest with changes of ellipsoidal height of −0.015m. Meanwhile, BENT station which is located on the Bentong-Raub suture zone turns to its original position as well as JRNT station. However, BEHR station which are located in western belt do not show any movements. All of these movements may be due to the influence of reactive faults in the stations area stimulated by several large earthquakes that occurred in 2005 to 2010. Study on using the GPS data analysis and combine with integrated geophysical methods are necessary to understand in detail about the tectonic evolution of Peninsular Malaysia.« less

Potential human health risk assessment of heavy metals via the consumption of tilapia Oreochromis mossambicus collected from contaminated and uncontaminated ponds.

PubMed

Yap, Chee Kong; Jusoh, Amiruddin; Leong, Wah June; Karami, Ali; Ong, Ghim Hock

2015-09-01

Fish tilapia Oreochromis mossambicus were collected from a contaminated Seri Serdang (SS) pond potentially receiving domestic effluents and an uncontaminated pond from Universiti Putra Malaysia (UPM). The fish were dissected into four parts namely gills, muscles, intestines, and liver. All the fish parts were pooled and analyzed for the concentrations of Cd, Cu, Fe, Ni, Pb, and Zn. Generally, the concentrations of all metals were low in the edible muscle in comparison to the other parts of the fish. It was found that the levels of all the heavy metals in the different parts of fish collected from the SS were significantly (P<0.05) higher than those from UPM, indicating greater metal bioavailabilities in the SS pond. The sediment data also showed a similar pattern with significantly (P<0.05) higher metal concentrations in SS than in UPM, indicating higher metal contamination in SS. Potential health risk assessments based on provisional tolerable weekly intake (PTWI) and the amount of fish required to reach the PTWI values, estimated daily intake (EDI), and target hazard quotient (THQ) indicated that health risks associated with heavy metal exposure via consumption of the fish's muscles were insignificant to human. Therefore, the consumption of the edible muscles of tilapia from both ponds should pose no toxicological risk of heavy metals since their levels are also below the recommended safety guidelines. While it is advisable to discard the livers, gills, and intestines of the two tilapia fish populations before consumption, there were no potential human health risks of heavy metals to the consumers on the fish muscle part.

Space evaluation of optical modulators for microwave photonic on-board applications

NASA Astrophysics Data System (ADS)

Le Kernec, A.; Sotom, M.; Bénazet, B.; Barbero, J.; Peñate, L.; Maignan, M.; Esquivias, I.; Lopez, F.; Karafolas, N.

2017-11-01

Since several years, perspectives and assets offered by photonic technologies compared with their traditional RF counterparts (mass and volume reduction, transparency to RF frequency, RF isolation), make them particularly attractive for space applications [1] and, in particular, telecommunication satellites [2]. However, the development of photonic payload concepts have concurrently risen and made the problem of the ability of optoelectronic components to withstand space environment more and more pressing. Indeed, photonic components used in such photonic payloads architectures come from terrestrial networks applications in order to benefit from research and development in this field. This paper presents some results obtained in the frame of an ESA-funded project, carried out by Thales Alenia Space France, as prime contractor, and Alter Technology Group Spain (ATG) and Universidad Politecnica de Madrid (UPM), as subcontractors, one objective of which was to assess commercial high frequency optical intensity modulators for space use through a functional and environmental test campaign. Their potential applications in microwave photonic sub-systems of telecom satellite payloads are identified and related requirements are presented. Optical modulator technologies are reviewed and compared through, but not limited to, a specific figure of merit, taking into account two key features of these components : optical insertion loss and RF half-wave voltage. Some conclusions on these different technologies are given, on the basis of the test results, and their suitability for the targeted applications and environment is highlighted.

Active learning in the space engineering education at Technical University of Madrid

NASA Astrophysics Data System (ADS)

Rodríguez, Jacobo; Laverón-Simavilla, Ana; Lapuerta, Victoria; Ezquerro Navarro, Jose Miguel; Cordero-Gracia, Marta

This work describes the innovative activities performed in the field of space education at the Technical University of Madrid (UPM), in collaboration with the center engaged by the European Space Agency (ESA) in Spain to support the operations for scientific experiments on board the International Space Station (E-USOC). These activities have been integrated along the last academic year of the Aerospatiale Engineering degree. A laboratory has been created, where the students have to validate and integrate the subsystems of a microsatellite by using demonstrator satellites. With the acquired skills, the students participate in a training process centered on Project Based Learning, where the students work in groups to perform the conceptual design of a space mission, being each student responsible for the design of a subsystem of the satellite and another one responsible of the mission design. In parallel, the students perform a training using a ground station, installed at the E-USOC building, which allow them to learn how to communicate with satellites, how to download telemetry and how to process the data. This also allows students to learn how the E-USOC works. Two surveys have been conducted to evaluate the impact of these techniques in the student engineering skills and to know the degree of satisfaction of students with respect to the use of these learning methodologies.

Ceramic matrix composites - Forerunners of technological breakthrough in space vehicle hot structures and thermal protection system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lacombe, A.; Rouges, J.

1990-01-01

The current status of carbon-carbon and carbon-silicon carbide composites developed for aerospace applications is reviewed. In particular, attention is given to production facilities and technologies for the manufacture of C-C and C-SiC composites, mechanical and thermal characteristics of carbon-carbon and carbon-silicon carbide materials, applications to thermal structures and protection, and technologies developed to build large C-SiC thermostructural components within the Hermes program. 9 refs.

Ceramic Matrix Composites (CMC) Life Prediction Development - 2003

NASA Technical Reports Server (NTRS)

Levine, Stanley R.; Calomino, Anthony M.; Verrilli, Michael J.; Thomas, David J.; Halbig, Michael C.; Opila, Elizabeth J.; Ellis, John R.

2003-01-01

Accurate life prediction is critical to successful use of ceramic matrix composites (CMCs). The tools to accomplish this are immature and not oriented toward the behavior of carbon fiber reinforced silicon carbide (C/SiC), the primary system of interest for many reusable and single mission launch vehicle propulsion and airframe applications. This paper describes an approach and progress made to satisfy the need to develop an integrated life prediction system that addresses mechanical durability and environmental degradation of C/SiC.

Use of Damage Data for Calibration of GMPE's in Haiti

NASA Astrophysics Data System (ADS)

Torres, Y.; Molina, S.; Navarro, M.; Benito, B.

2013-05-01

After the 12 January 2010 earthquake that occurred in the south of Haiti, the Earthquake Engineering Researching Group (GIIS) of the Technical University of Madrid (UPM, Spain) set up a cooperative line with the National Observatory of the Environment and Vulnerability of Haiti (ONEV), under the Ministry of the Environment. Within the frame of that working line, the project SISMO-HAITI was launched to estimate the seismic hazard in the country and the seismic risk in Port-au-Prince, the capital city. It was financed by the UPM. In the frame of the seismic risk study, an approach aimed at calibrating the Ground Motion Prediction Equations (GMPE`s) using damage data, was proposed and applied. This approach is presented here and may be useful in absence of strong motion data. The seismic risk estimation was carried out by following the capacity spectrum method as implemented in the software SELENA (Molina et al., 2010). The method requires two main inputs: classification of the building stock into predominant building typologies and a ground motion prediction equation (GMPE) to estimate the seismic demand. We found six building typologies in the city, and were assigned capacity and fragility curves (damage functions) taken from HAZUS and RISK-UE, which account for their vulnerability. Regarding the GMPE, as there are not relationships developed specifically for Haiti, we decided to use the next four: Boore & Atkinson (2008-2011), Abrahamson & Silva, (2008), Campbell & Bozorgnia (2008), Chiou & Youngs (2008). All of them belong to the Next Generation Attenuation (NGA) models and allow including several parameters to define the seismic scenario, the source and the soil geotechnical characteristics. In this paper we present the results of the GMPE's calibration, a step aimed at figure out which is the most suitable relationship for the study area. We could not use acceleration records, since there were no accelerometers at the moment of the earthquake occurrence. Instead, we used data on the damage caused by the earthquake provided by the Haitian Ministry of Public Works. To achieve that, we simulated the earthquake in SELENA and compared our results with the observed damage. Through an iterative process based on minimizing the residuals, we calibrated both, the GMPE and the damage functions associated with the building typologies. We found that Boore & Atkinson and Campbell & Bozorgnia are the models that yield the lowest root mean square (RMS) error; hence, these GMPS's could be considered as the models that better predict the damage, together with the calibrated set of damage functions. Accordingly, we propose them to be used in future seismic risk assessments in the city.

Analysis Methodology for Optimal Selection of Ground Station Site in Space Missions

NASA Astrophysics Data System (ADS)

Nieves-Chinchilla, J.; Farjas, M.; Martínez, R.

2013-12-01

Optimization of ground station sites is especially important in complex missions that include several small satellites (clusters or constellations) such as the QB50 project, where one ground station would be able to track several spatial vehicles, even simultaneously. In this regard the design of the communication system has to carefully take into account the ground station site and relevant signal phenomena, depending on the frequency band. To propose the optimal location of the ground station, these aspects become even more relevant to establish a trusted communication link due to the ground segment site in urban areas and/or selection of low orbits for the space segment. In addition, updated cartography with high resolution data of the location and its surroundings help to develop recommendations in the design of its location for spatial vehicles tracking and hence to improve effectiveness. The objectives of this analysis methodology are: completion of cartographic information, modelling the obstacles that hinder communication between the ground and space segment and representation in the generated 3D scene of the degree of impairment in the signal/noise of the phenomena that interferes with communication. The integration of new technologies of geographic data capture, such as 3D Laser Scan, determine that increased optimization of the antenna elevation mask, in its AOS and LOS azimuths along the horizon visible, maximizes visibility time with spatial vehicles. Furthermore, from the three-dimensional cloud of points captured, specific information is selected and, using 3D modeling techniques, the 3D scene of the antenna location site and surroundings is generated. The resulting 3D model evidences nearby obstacles related to the cartographic conditions such as mountain formations and buildings, and any additional obstacles that interfere with the operational quality of the antenna (other antennas and electronic devices that emit or receive in the same bandwidth). To check/test the spatial proposal of the ground station site, this analysis methodology uses mission simulation software of spatial vehicles to analyze and quantify how the geographic accuracy of the position of the spatial vehicles along the horizon visible from the antenna, increases communication time with the ground station. Experimental results that have been obtained from a ground station located at ETSIT-UPM in Spain (QBito Nanosatellite, UPM spacecraft mission within the QB50 project) show that selection of the optimal site increases the field of view from the antenna and hence helps to meet mission requirements.

Thermal Hysteresis of MEMS Packaged Capacitive Pressure Sensor (CPS) Based 3C-SiC

NASA Astrophysics Data System (ADS)

Marsi, N.; Majlis, B. Y.; Mohd-Yasin, F.; Hamzah, A. A.; Mohd Rus, A. Z.

2016-11-01

Presented herein are the effects of thermal hysteresis analyses of the MEMS packaged capacitive pressure sensor (CPS). The MEMS CPS was employed on Si-on-3C-SiC wafer that was performed using the hot wall low-pressure chemical vapour deposition (LPCVD) reactors at the Queensland Micro and Nanotechnology Center (QMNC), Griffith University and fabricated using the bulk-micromachining process. The MEMS CPS was operated at an extreme temperature up to 500°C and high external pressure at 5.0 MPa. The thermal hysteresis phenomenon that causes the deflection, strain and stress on the 3C-SiC diaphragm spontaneously influence the MEMS CPS performances. The differences of temperature, hysteresis, and repeatability test were presented to demonstrate the functionality of the MEMS packaged CPS. As expected, the output hysteresis has a low hysteresis (less than 0.05%) which has the hardness greater than the traditional silicon. By utilizing this low hysteresis, it was revealed that the MEMS packaged CPS has high repeatability and stability of the sensor.

Delivery room management of very low birth weight infants in Germany, Austria and Switzerland - a comparison of protocols

PubMed Central

2010-01-01

Background Surveys from the USA, Australia and Spain have shown significant inter-institutional variation in delivery room (DR) management of very low birth weight infants (VLBWI, < 1500 g) at birth, despite regularly updated international guidelines. Objective To investigate protocols for DR management of VLBWI in Germany, Austria and Switzerland and to compare these with the 2005 ILCOR guidelines. Methods DR management protocols were surveyed in a prospective, questionnaire-based survey in 2008. Results were compared between countries and between academic and non-academic units. Protocols were compared to the 2005 ILCOR guidelines. Results In total, 190/249 units (76%) replied. Protocols for DR management existed in 94% of units. Statistically significant differences between countries were found regarding provision of 24 hr in house neonatal service; presence of a designated resuscitation area; devices for respiratory support; use of pressure-controlled manual ventilation devices; volume control by respirator; and dosage of Surfactant. There were no statistically significant differences regarding application and monitoring of supplementary oxygen, or targeted saturation levels, or for the use of sustained inflations. Comparison of academic and non-academic hospitals showed no significant differences, apart from the targeted saturation levels (SpO2) at 10 min. of life. Comparison with ILCOR guidelines showed good adherence to the 2005 recommendations. Summary Delivery room management in German, Austrian and Swiss neonatal units was commonly based on written protocols. Only minor differences were found regarding the DR setup, devices used and the targeted ranges for SpO2 and FiO2. DR management was in good accordance with 2005 ILCOR guidelines, some units already incorporated evidence beyond the ILCOR statement into their routine practice. PMID:21159574

[Evaluation and prioritisation of the scientific research in Spain. Researchers' point of view].

PubMed

María Martín-Moreno, José; Juan Toharia, José; Gutiérrez Fuentes, José Antonio

2008-12-01

The assessment and prioritisation of research activity are essential components of any Science, Technology and Industry System. Data on researchers' perspectives in this respect are scarce. The objective of this paper was to describe Spanish scientists' point of view on the current evaluation system in Spain and how they believe this system should be functionally structured. From the sampling frame formed by established Spanish scientists, listed in the databases of CSIC and FIS (Institute of Health Carlos III), clinical, biomedical-non clinical, and physics and chemical researchers were randomly selected. Two hundred and eleven interviews were carried out by means of a computer-assisted telephone interviewing system. Researchers expressed their acknowledgement of progress in the Spanish research field but made their wish clear to progress towards better scientific scenarios. In their assessment, they gave a score of 5.4 to scientific policy, as opposed to 9.4 when speaking about the goals, reflecting the desire for a better policy definition, with clear objectives, stable strategies and better coordination of R&D activities (the current coordination received a score of 3.9, while the desirable coordination was valued as high as 9.2). There was certain agreement regarding the need for a prioritisation criteria which preserves some degree of creativity by researchers. They also stated that they would like to see an independent research structure with social prestige and influence. The interviewed researchers believe that the evaluation of scientific activities is fundamental in formulating a sound scientific policy. Prioritisation should arise from appropriate evaluation. Strategies properly coordinated among all the stakeholders (including the private sector) should be fostered. Budget sufficiency, stability, and better organization of independent researchers should be the backbone of any strategy tailored to increase their capacity to influence future scientific policies.

North Atlantic Oscillation influence on the stramflows of the Iberian Rivers

NASA Astrophysics Data System (ADS)

Lorenzo-Lacruz, J.; González-Hidalgo, J. C.; Vicente-Serrano, S. M.; López-Moreno, J. I.

2010-09-01

"NORTH ATLANTIC OSCILLATION INFLUENCE ON THE STREAMFLOWS OF THE IBERIAN RIVERS" LORENZO-LACRUZ, J. ¹, GONZÁLEZ-HIDALGO, J.C.², VICENTE-SERRANO, S.M. ¹, LÓPEZ-MORENO, J.I.¹ ¹Instituto Pirenaico de Ecología, CSIC (Spanish Research Council), Campus de Aula Dei, P.O. Box 202, Zaragoza 50080, Spain ²Departamento de Geografía, Universidad de Zaragoza, Zaragoza, Spain. We analyzed the North Atlantic Oscillation (NAO) influence on the monthly river discharges of Iberian rivers from 1945 to 2005. The study covers most of the Iberian river basins, using 187 monthly discharge series. The aim of this study is to determine the role of the variability of the NAO on the Iberian river discharges. Using the winter NAO we calculated correlations with the monthly river discharge series. We identified the positive and negative phases of the winter NAO for the period 1945-2006, and related to river discharge anomalies. Significant differences in river discharge were found between the positive and negative NAO phases with negative anomalies (dry conditions) during positive NAO periods, and positive anomalies (wet conditions) during negative NAO periods The results show a consistent and strong control of the river discharges by the winter NAO, but some spatial differences are shown, as three different domains were defined: a region under the direct influence of the NAO (central and western part of the Iberian Peninsula), a transition zone (Ebro Valley) and region free from that influence (Eastern part of the Iberian Peninsula). The spatial differences are also identified in the annual pattern of discharge anomalies. The basin characteristics, the location of the gauging stations and the human management are the possible drivers of these differences.

Demonstration of Advanced C/SiC Cooled Ramp

NASA Technical Reports Server (NTRS)

Bouquet, Clement; Laithier, Frederic; Lawrence, Timothy; Eckel, Andrew; Munafo, Paul M. (Technical Monitor)

2002-01-01

Under a NASA contract, SPS is evaluating its C/SiC to metal brazing technique for the development of light, composite, actively cooled panels. The program first consisted of defining a system applicable to the X-33 nozzle ramp. SPS then performed evaluation tests for tube, composite, and braze material selection, and for the adaptation of braze process parameters to the parts geometry. SPS is presently manufacturing a 250x60 millimeter squared specimen, including 10 metallic tubes, which will be cycled in the NASA/GRC-CELL-22 test bed under engine representative conditions.

Elimination of double position domains (DPDs) in epitaxial 〈111〉-3C-SiC on Si(111) by laser CVD

NASA Astrophysics Data System (ADS)

Xu, Qingfang; Zhu, Peipei; Sun, Qingyun; Tu, Rong; Yang, Meijun; Zhang, Song; Zhang, Lianmeng; Goto, Takashi; Yan, Jiasheng; Li, Shusen

2017-12-01

Elimination of double position domains (DPDs) in epitaxial 〈111〉-3C-SiC film on Si(111) substrate was conducted by laser chemical vapor deposition (LCVD) without carbonization. Transmission electron microscopy and pole figure were employed to investigate the microstructure and volume fraction of DPDs in the epitaxial layers, respectively. DPDs significantly decreased with decreasing deposition temperature (Tdep) and vanished at Tdep = 1273 K. The mechanism of the elimination of DPDs by LCVD also has been discussed.

Analysis of surface deformation during the eruptive process of El Hierro Island (Canary Islands, Spain): Detection, Evolution and Forecasting.

NASA Astrophysics Data System (ADS)

Berrocoso, M.; Fernandez-Ros, A.; Prates, G.; Martin, M.; Hurtado, R.; Pereda, J.; Garcia, M. J.; Garcia-Cañada, L.; Ortiz, R.; Garcia, A.

2012-04-01

The surface deformation has been an essential parameter for the onset and evolution of the eruptive process of the island of El Hierro (October 2011) as well as for forecasting changes in seismic and volcanic activity during the crisis period. From GNSS-GPS observations the reactivation is early detected by analizing the change in the deformation of the El Hierro Island regional geodynamics. It is found that the surface deformation changes are detected before the occurrence of seismic activity using the station FRON (GRAFCAN). The evolution of the process has been studied by the analysis of time series of topocentric coordinates and the variation of the distance between stations on the island of El Hierro (GRAFCAN station;IGN network; and UCA-CSIC points) and LPAL-IGS station on the island of La Palma. In this work the main methodologies and their results are shown: •The location (and its changes) of the litospheric pressure source obtained by applying the Mogi model. •Kalman filtering technique for high frequency time series, used to make the forecasts issued for volcanic emergency management. •Correlations between deformation of the different GPS stations and their relationship with seismovolcanic settings.

Rosetta/OSIRIS: Nucleus morphology and activity of comet 67P/Churyumov-Gerasimenko

NASA Astrophysics Data System (ADS)

Sierks, Holger

2015-08-01

Introduction: The Rosetta mission of the European Space Agency arrived on August 6, 2014, at the target comet 67P/Churyumov-Gerasimenko after 10 years of cruise. OSIRIS (Optical, Spectroscopic, and Infrared Remote Imaging System) is the scientific imaging system onboard Rosetta. It comprises a Narrow Angle Camera (NAC) for broad-band nucleus surface and dust studies and a Wide Angle Camera (WAC) for the wide field coma investigations.OSIRIS images the nucleus and the coma of comet 67P/C-G from the arrival throughout early mapping phase, PHILAE landing, and escort phase with close fly-by beginning of the year 2015.The team paper presents the surface morphology and activity of the nucleus as seen in gas, dust, and local jets and the larger scale coma studied by OSIRIS.Acknowledgements: OSIRIS was built by a consortium led by the Max-Planck-Institut für Sonnensystemforschung, Göttingen, Germany, in collaboration with CISAS, University of Padova, Italy, the Laboratoire d'Astrophysique de Marseille, France, the Instituto de Astrofísica de Andalucia, CSIC, Granada, Spain, the Scientific Support Office of the European Space Agency, Noordwijk, The Netherlands, the Instituto Nacional de Técnica Aeroespacial, Madrid, Spain, the Universidad Politéchnica de Madrid, Spain, the Department of Physics and Astronomy of Uppsala University, Sweden, and the Institut für Datentechnik und Kommunikationsnetze der Technischen Universität Braunschweig, Germany.Additional Information: The OSIRIS team is H. Sierks, C. Barbieri, P. Lamy, R. Rodrigo, D. Koschny, H. Rickman, J. Agarwal, M. A'Hearn, I. Bertini, F. Angrilli, M. A. Barucci, J. L. Bertaux, G. Cremonese, V. Da Deppo, B. Davidsson, S. Debei, M. De Cecco, S. Fornasier, M. Fulle, O. Groussin, C. Güttler, P. Gutierrez, S. Hviid, W. Ip, L. Jorda, H. U. Keller, J. Knollenberg, R. Kramm, E. Kührt, M. Küppers, L. Lara, M. Lazzarin, J. J. Lopez, S. Lowry, S. Marchi, F. Marzari, H. Michalik, S. Mottola, G. Naletto, N. Oklay, L. Sabau, N. Thomas, C. Tubiana, J-B. Vincent, P. Wenzel, Associate Scientists & Assistants.

Variegation of active regions on comet 67P/Churyumov-Gerasimenko

NASA Astrophysics Data System (ADS)

Oklay, Nilda; Vincent, Jean-Baptiste; Fornasier, Sonia; Pajola, Maurizio; Besse, Sebastien; Lara, Luisa M.; Barucci, Maria Antonietta; Mottola, Stefano; Sierks, Holger; Pommerol, Antoine; Masoumzadeh, Nafiseh; Lazzarin, Monica; Scholten, Frank; Preusker, Frank; Hall, Ian

2015-11-01

Since Rosetta spacecraft’s arrival to the comet 67P, the OSIRIS scientific imager (Optical, Spectroscopic, and Infrared Remote Imaging System, Keller et al. 2007) is successfully observing the nucleus with high spatial resolution in the 250-1000 nm range thanks to set of 26 dedicated filters.While 67P has a typical red spectral slope, the active areas tend to display bluer spectra (Sierks et al. 2015, Fornasier et al. 2015). We performed a spectral analysis of the active areas and derived spectral characteristics of them, possibly indicating the presence of material enriched in volatiles.The ‘activity thresholds’ spectral method (Oklay et al, 2015) is used for the identification of the active areas. In most cases, areas detected with this technique have been later on confirmed as active sources (Lara et al. 2015, Lin et al. 2015, Vincent et al. 2015) by direct detection of dust jets. This technique is therefore able to identify currently active areas, but also predicts which regions of the surface are likely to become activated once they receive enough insolation.Acknowledgements: OSIRIS was built by a consortium led by the Max-Planck-Institut für Sonnensystemforschung, Göttingen, Germany, in collaboration with CISAS, University of Padova, Italy, the Laboratoire d'Astrophysique de Marseille, France, the Instituto de Astrofi­sica de Andalucia, CSIC, Granada, Spain, the Scientific Support Office of the European Space Agency, Noordwijk, The Netherlands, the Instituto Nacional de Tecnica Aeroespacial, Madrid, Spain, the Universidad Politechnica de Madrid, Spain, the Department of Physics and Astronomy of Uppsala University, Sweden, and the Institut für Datentechnik und Kommunikationsnetze der Technischen Universität Braunschweig, Germany. We thank the Rosetta Science Ground Segment at ESAC, the Rosetta Mission Operations Centre at ESOC and the Rosetta Project at ESTEC for their outstanding work enabling the science return of the Rosetta Mission.Keller, et al. 2007, Space Sci. Rev., 128, 433Sierks et al. 2015, Science, 347,1Fornasier et al. 2015, A&A, published onlineLara et al. 2015, A&A, published onlineLin et al. 2015, A&A, published onlineVincent et al. 2015, A&A, submittedOklay et al. 2015, in preparation

[Santiago Ramón y Cajal: his activity as a military doctor (1873-1875)].

PubMed

Moreno Martinez, J M; Martin Araguz, A

Santiago Ram n y Cajal entered the Medical Corps after graduating in Medicine in 1873. His marked Spanish nationalist character and his excellent physical condition led him to serve in the third Carlist war as a medical lieutenant and later in the Cuban War as a captain. His stay in Cuba, however, was marked by hardship and illness. The decline of Spain s colonialist policy, the war that was fought in a hostile climate and atmosphere, and the corruption of the military officers led to Santiago being posted to the frontlines on a fixed logistics system of trails. All this was to end in military failure and the subsequent loss of the colony. Disillusioned and seriously ill from malaria, which nearly killed him, he returned to Spain after being discharged for illness. Shortly afterwards, thanks to Dr. Jenaro Casas, he became a university lecturer, which put an end to his military career

Improved C/SiC Ceramic Composites Made Using PIP

NASA Technical Reports Server (NTRS)

Easler, Timothy

2007-01-01

Improved carbon-fiber-reinforced SiC ceramic-matrix composite (C/SiC CMC) materials, suitable for fabrication of thick-section structural components, are producible by use of a combination of raw materials and processing conditions different from such combinations used in the prior art. In comparison with prior C/SiC CMC materials, these materials have more nearly uniform density, less porosity, and greater strength. The majority of raw-material/processing-condition combinations used in the prior art involve the use of chemical vapor infiltration (CVI) for densifying the matrix. In contrast, in synthesizing a material of the present type, one uses a combination of infiltration with, and pyrolysis of, a preceramic polymer [polymer infiltration followed by pyrolysis (PIP)]. PIP processing is performed in repeated, tailored cycles of infiltration followed by pyrolysis. Densification by PIP processing takes less time and costs less than does densification by CVI. When one of these improved materials was tested by exposure to a high-temperature, inert-gas environment that caused prior C/SiC CMCs to lose strength, this material did not lose strength. (Information on the temperature and exposure time was not available at the time of writing this article.) A material of the present improved type consists, more specifically, of (1) carbon fibers coated with an engineered fiber/matrix interface material and (2) a ceramic matrix, containing SiC, derived from a pre-ceramic polymer with ceramic powder additions. The enhancements of properties of these materials relative to those of prior C/SiC CMC materials are attributable largely to engineering of the fiber/ matrix interfacial material and the densification process. The synthesis of a material of this type includes processing at an elevated temperature to a low level of open porosity. The approach followed in this processing allows one to fabricate not only simple plates but also more complexly shaped parts. The carbon fiber reinforcement in a material of this type can be in any of several alternative forms, including tow, fabric, or complex preforms containing fibers oriented in multiple directions.

CALIFA, the Calar Alto Legacy Integral Field Area survey. IV. Third public data release

NASA Astrophysics Data System (ADS)

Sánchez, S. F.; García-Benito, R.; Zibetti, S.; Walcher, C. J.; Husemann, B.; Mendoza, M. A.; Galbany, L.; Falcón-Barroso, J.; Mast, D.; Aceituno, J.; Aguerri, J. A. L.; Alves, J.; Amorim, A. L.; Ascasibar, Y.; Barrado-Navascues, D.; Barrera-Ballesteros, J.; Bekeraitè, S.; Bland-Hawthorn, J.; Cano Díaz, M.; Cid Fernandes, R.; Cavichia, O.; Cortijo, C.; Dannerbauer, H.; Demleitner, M.; Díaz, A.; Dettmar, R. J.; de Lorenzo-Cáceres, A.; del Olmo, A.; Galazzi, A.; García-Lorenzo, B.; Gil de Paz, A.; González Delgado, R.; Holmes, L.; Iglésias-Páramo, J.; Kehrig, C.; Kelz, A.; Kennicutt, R. C.; Kleemann, B.; Lacerda, E. A. D.; López Fernández, R.; López Sánchez, A. R.; Lyubenova, M.; Marino, R.; Márquez, I.; Mendez-Abreu, J.; Mollá, M.; Monreal-Ibero, A.; Ortega Minakata, R.; Torres-Papaqui, J. P.; Pérez, E.; Rosales-Ortega, F. F.; Roth, M. M.; Sánchez-Blázquez, P.; Schilling, U.; Spekkens, K.; Vale Asari, N.; van den Bosch, R. C. E.; van de Ven, G.; Vilchez, J. M.; Wild, V.; Wisotzki, L.; Yıldırım, A.; Ziegler, B.

2016-10-01

This paper describes the third public data release (DR3) of the Calar Alto Legacy Integral Field Area (CALIFA) survey. Science-grade quality data for 667 galaxies are made public, including the 200 galaxies of the second public data release (DR2). Data were obtained with the integral-field spectrograph PMAS/PPak mounted on the 3.5 m telescope at the Calar Alto Observatory. Three different spectral setups are available: I) a low-resolution V500 setup covering the wavelength range 3745-7500 Å (4240-7140 Å unvignetted) with a spectral resolution of 6.0 Å (FWHM) for 646 galaxies, II) a medium-resolution V1200 setup covering the wavelength range 3650-4840 Å (3650-4620 Å unvignetted) with a spectral resolution of 2.3 Å (FWHM) for 484 galaxies, and III) the combination of the cubes from both setups (called COMBO) with a spectral resolution of 6.0 Å and a wavelength range between 3700-7500 Å (3700-7140 Å unvignetted) for 446 galaxies. The Main Sample, selected and observed according to the CALIFA survey strategy covers a redshift range between 0.005 and 0.03, spans the color-magnitude diagram and probes a wide range of stellar masses, ionization conditions, and morphological types. The Extension Sample covers several types of galaxies that are rare in the overall galaxy population and are therefore not numerous or absent in the CALIFA Main Sample. All the cubes in the data release were processed using the latest pipeline, which includes improved versions of the calibration frames and an even further improved image reconstruction quality. In total, the third data release contains 1576 datacubes, including ~1.5 million independent spectra. Based on observations collected at the Centro Astronómico Hispano Alemán (CAHA) at Calar Alto, operated jointly by the Max-Planck-Institut für Astronomie (MPIA) and the Instituto de Astrofísica de Andalucía (CSIC).The spectra are available at http://califa.caha.es/DR3

First Measurements of the Rover Environmental Monitoring Station (REMS) on the Mars Science Laboratory

NASA Astrophysics Data System (ADS)

Martín-Torres, F. J.; Zorzano-Mier, M.; Gomez-Elvira, J.

2012-12-01

The Rover Environmental Monitoring Station (REMS) on the Mars Science Laboratory (MSL) mission has sensors recording air and ground temperature, pressure, relative humidity, wind speed in the horizontal and vertical directions, as well as ultraviolet radiation in different bands. Typical daily REMS observations will collect 180 minutes of data from all sensors simultaneously (arranged in 5 minute hourly samples plus 60 additional minutes taken at times to be decided, daily, during the course of the mission). REMS will add significantly to the environmental record collected by prior missions through the range of simultaneous observations including water vapor; the ability to take measurements routinely through the night; the intended minimum of one Martian year of observations; and the first measurement of surface UV irradiation. The capability of multiple, consistent, and simultaneous data is essential for meaningful interpretation of near-surface processes including the characterization of soil thermal properties. The Martian atmosphere is generally transparent to solar radiation, but atmospheric dust absorbs solar radiation and heats the atmosphere, while UV radiation ionizes atmospheric gases and is harmful to any potential Martian organisms (past or present). For this reason, knowledge of the UV radiation flux at the surface of Mars is important for the understanding habitability conditions, one of the main goals of the MSL mission. Moreover UV radiation is a significant driver in the photochemistry of the atmosphere and surface. In this paper we present a first analysis of REMS measurements, the status of the different sensors and the potential of REMS for Mars environmental studies. REMS Team: C. Armiens, I. Carrasco, F. Gómez, A. Lepinette, J. Martín, J. Martínez-Frías, L. Mora, S. Navarro, V. Peinado, J. Rodríguez-Manfredi, J. Romeral, E. Sebastián, J. Torres, J. Verdasca (Centro de Astrobiología (CSIC-INTA), Carretera de Ajalvir, km. 4, 28850 Torrejón de Ardoz, Madrid, Spain ) I. McEwan, M. Richardson Ashima Research, Inc., Pasadena, CA, USA L. Castañer, M. Domínguez, V. Jiménez, L. Kowalski, J. Ricart Universidad Politécnica de Cataluña, Barcelona, Spain M.A. de Pablo, M. Ramos Universidad de Alcalá de Henares, Alcalá de Henares, Madrid, Spain M. de la Torre Juárez Jet Propulsion Laboratory, Pasadena, CA, USA J. Moreno, A. Peña, J. Serrano, F. Torrero, T. Velasco EADS-CRISA, Madrid, Spain N.O. Renno Michigan University, Ann Arbor, MI, USA M. Genzer, A.-M. Harri, H. Kahanpää, J. Polkko FMI, Finland R. Haberle NASA Ames Research Center, CA, USA R. Urquí INSA, Madrid, Spain

Damage buildup in Ar-ion-irradiated 3 C-SiC at elevated temperatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wallace, J. B.; Bayu Aji, L. B.; Li, T. T.

Above room temperature, the accumulation of radiation damage in 3 C-SiC is strongly influenced by dynamic defect interaction processes and remains poorly understood. Here, we use a combination of ion channeling and transmission electron microscopy to study lattice disorder in 3 C-SiC irradiated with 500 keV Ar ions in the temperature range of 25–250 °C. Results reveal sigmoidal damage buildup for all the temperatures studied. For 150 °C and below, the damage level monotonically increases with ion dose up to amorphization. Starting at 200 °C, the shape of damage–depth profiles becomes anomalous, with the damage peak narrowing and moving tomore » larger depths and an additional shoulder forming close to the ion end of range. As a result, damage buildup curves for 200 and 250 °C exhibit an anomalous two-step shape, with a damage saturation stage followed by rapid amorphization above a critical ion dose, suggesting a nucleation-limited amorphization behavior. Despite their complexity, all damage buildup curves are well described by a phenomenological model based on an assumption of a linear dependence of the effective amorphization cross section on ion dose. Here, in contrast to the results of previous studies, 3 C-SiC can be amorphized by bombardment with 500 keV Ar ions even at 250 °C with a relatively large dose rate of ~2×10 13 cm -2 s -1, revealing a dominant role of defect interaction dynamics at elevated temperatures.« less

Damage buildup in Ar-ion-irradiated 3 C-SiC at elevated temperatures

DOE PAGES

Wallace, J. B.; Bayu Aji, L. B.; Li, T. T.; ...

2015-09-14

Above room temperature, the accumulation of radiation damage in 3 C-SiC is strongly influenced by dynamic defect interaction processes and remains poorly understood. Here, we use a combination of ion channeling and transmission electron microscopy to study lattice disorder in 3 C-SiC irradiated with 500 keV Ar ions in the temperature range of 25–250 °C. Results reveal sigmoidal damage buildup for all the temperatures studied. For 150 °C and below, the damage level monotonically increases with ion dose up to amorphization. Starting at 200 °C, the shape of damage–depth profiles becomes anomalous, with the damage peak narrowing and moving tomore » larger depths and an additional shoulder forming close to the ion end of range. As a result, damage buildup curves for 200 and 250 °C exhibit an anomalous two-step shape, with a damage saturation stage followed by rapid amorphization above a critical ion dose, suggesting a nucleation-limited amorphization behavior. Despite their complexity, all damage buildup curves are well described by a phenomenological model based on an assumption of a linear dependence of the effective amorphization cross section on ion dose. Here, in contrast to the results of previous studies, 3 C-SiC can be amorphized by bombardment with 500 keV Ar ions even at 250 °C with a relatively large dose rate of ~2×10 13 cm -2 s -1, revealing a dominant role of defect interaction dynamics at elevated temperatures.« less

Mechanically and chemically robust sandwich-structured C@Si@C nanotube array Li-ion battery anodes.

PubMed

Liu, Jinyun; Li, Nan; Goodman, Matthew D; Zhang, Hui Gang; Epstein, Eric S; Huang, Bo; Pan, Zeng; Kim, Jinwoo; Choi, Jun Hee; Huang, Xingjiu; Liu, Jinhuai; Hsia, K Jimmy; Dillon, Shen J; Braun, Paul V

2015-02-24

Stability and high energy densities are essential qualities for emerging battery electrodes. Because of its high specific capacity, silicon has been considered a promising anode candidate. However, the several-fold volume changes during lithiation and delithiation leads to fractures and continuous formation of an unstable solid-electrolyte interphase (SEI) layer, resulting in rapid capacity decay. Here, we present a carbon-silicon-carbon (C@Si@C) nanotube sandwich structure that addresses the mechanical and chemical stability issues commonly associated with Si anodes. The C@Si@C nanotube array exhibits a capacity of ∼2200 mAh g(-1) (∼750 mAh cm(-3)), which significantly exceeds that of a commercial graphite anode, and a nearly constant Coulombic efficiency of ∼98% over 60 cycles. In addition, the C@Si@C nanotube array gives much better capacity and structure stability compared to the Si nanotubes without carbon coatings, the ZnO@C@Si@C nanorods, a Si thin film on Ni foam, and C@Si and Si@C nanotubes. In situ SEM during cycling shows that the tubes expand both inward and outward upon lithiation, as well as elongate, and then revert back to their initial size and shape after delithiation, suggesting stability during volume changes. The mechanical modeling indicates the overall plastic strain in a nanotube is much less than in a nanorod, which may significantly reduce low-cycle fatigue. The sandwich-structured nanotube design is quite general, and may serve as a guide for many emerging anode and cathode systems.

[Criminal psychology in Franco's police].

PubMed

Bandrés, Javier; Llavona, Rafael; Zubieta, Eva

2013-02-01

Francisco J. de Echalecu (1897-1957) was a Spanish psychiatrist who held important positions, such as Psychology Professor at the Academia General de Policía and Neuropsychiatrist at the Dirección General de Seguridad. This work provides a brief biography of Echalecu and analyzes the transcriptions of his classes on Criminal Psychology of 1942, his Criminal Psychology from 1947 as well as his involvement in the case of the torture of Communist leader Heriberto Quiñones. We describe his project of a totalitarian Psychology and his proposal of social intervention, including eugenic methodologies as well as forced reclusion for those labeled as asocial. The adaptation in Spain of the totalitarian psychological project to the new international reality after the Second World War is also described. In Spain a "final solution" for criminals and political dissidents has been prepared, which was inspired by the Nazi criminal policies and promoted by Dr. Echalecu from Spain's higher police body, the DGS. This project was frustrated by the German defeat in the world war and the only thing left from the original project was the arbitrary application of the Ley de Vagos y Maleantes [an antivagrancy law] to those individuals labeled as "asocial".

Injected ion energy dependence of SiC film deposited by low-energy SiC3H9+ ion beam produced from hexamethyldisilane

NASA Astrophysics Data System (ADS)

Yoshimura, Satoru; Sugimoto, Satoshi; Takeuchi, Takae; Murai, Kensuke; Kiuchi, Masato

2018-04-01

We mass-selected SiC3H9+ ions from various fragments produced through the decomposition of hexamethyldisilane, and finally produced low-energy SiC3H9+ ion beams. The ion beams were injected into Si(1 0 0) substrates and the dependence of deposited films on injected ion energy was then investigated. Injected ion energies were 20, 100, or 200 eV. Films obtained were investigated with X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy. X-ray diffraction and X-ray photoelectron spectroscopy of the substrates obtained following the injection of 20 eV ions demonstrated the occurrence of silicon carbide film (3C-SiC) deposition. On the other hand, Raman spectroscopy showed that the films deposited by the injection of 100 or 200 eV ions included 3C-SiC plus diamond-like carbon. Ion beam deposition using hexamethyldisilane-derived 20 eV SiC3H9+ ions is an efficient technique for 3C-SiC film formation on Si substrates.

Life Modeling and Design Analysis for Ceramic Matrix Composite Materials

NASA Technical Reports Server (NTRS)

2005-01-01

The primary research efforts focused on characterizing and modeling static failure, environmental durability, and creep-rupture behavior of two classes of ceramic matrix composites (CMC), silicon carbide fibers in a silicon carbide matrix (SiC/SiC) and carbon fibers in a silicon carbide matrix (C/SiC). An engineering life prediction model (Probabilistic Residual Strength model) has been developed specifically for CMCs. The model uses residual strength as the damage metric for evaluating remaining life and is posed probabilistically in order to account for the stochastic nature of the material s response. In support of the modeling effort, extensive testing of C/SiC in partial pressures of oxygen has been performed. This includes creep testing, tensile testing, half life and residual tensile strength testing. C/SiC is proposed for airframe and propulsion applications in advanced reusable launch vehicles. Figures 1 and 2 illustrate the models predictive capabilities as well as the manner in which experimental tests are being selected in such a manner as to ensure sufficient data is available to aid in model validation.

Oxide Structure Dependence of SiO2/SiOx/3C-SiC/n-Type Si Nonvolatile Resistive Memory on Memory Operation Characteristics

NASA Astrophysics Data System (ADS)

Yamaguchi, Yuichiro; Shouji, Masatsugu; Suda, Yoshiyuki

2012-11-01

We have investigated the dependence of the oxide layer structure of our previously proposed metal/SiO2/SiOx/3C-SiC/n-Si/metal metal-insulator-semiconductor (MIS) resistive memory device on the memory operation characteristics. The current-voltage (I-V) measurement and X-ray photoemission spectroscopy results suggest that SiOx defect states mainly caused by the oxidation of 3C-SiC at temperatures below 1000 °C are related to the hysteresis memory behavior in the I-V curve. By restricting the SiOx interface region, the number of switching cycles and the on/off current ratio are more enhanced. Compared with a memory device formed by one-step or two-step oxidation of 3C-SiC, a memory device formed by one-step oxidation of Si/3C-SiC exhibits a more restrictive SiOx interface with a more definitive SiO2 layer and higher memory performances for both the endurance switching cycle and on/off current ratio.

Exploring Vocabulary Learning Strategies Used by UPM TESL Undergraduates

ERIC Educational Resources Information Center

Safian, Nur Hanisah; Malakar, Sharmila; Kalajahi, Seyed Ali Rezvani

2014-01-01

Vocabulary learning is one of the most challenging factors that learners will face during the process of second language learning. The main pursuit of the present study was to investigate the vocabulary language strategies among Malaysian ESL students majoring in Teaching English as a Second Language (TESL) at University Putra Malaysia. There are…

Studying the co-evolution of protein families with the Mirrortree web server.

PubMed

Ochoa, David; Pazos, Florencio

2010-05-15

The Mirrortree server allows to graphically and interactively study the co-evolution of two protein families, and investigate their possible interactions and functional relationships in a taxonomic context. The server includes the possibility of starting from single sequences and hence it can be used by non-expert users. The web server is freely available at http://csbg.cnb.csic.es/mtserver. It was tested in the main web browsers. Adobe Flash Player is required at the client side to perform the interactive assessment of co-evolution. pazos@cnb.csic.es Supplementary data are available at Bioinformatics online.

Microstructural evolution of neutron irradiated 3C-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sprouster, David J.; Koyanagi, Takaaki; Dooryhee, Eric

The microstructural response of neutron irradiated 3C-SiC have been investigated over a wide irradiation temperature and fluence range via qualitative and quantitative synchrotron-based X-ray diffraction characterization. Here, we identify several neutron fluence- and irradiation temperature-dependent changes in the microstructure, and directly highlight the specific defects introduced through the course of irradiation. By quantifying the microstructure, we aim to develop a more detailed understanding of the radiation response of SiC. Such studies are important to build mechanistic models of material performance and to understand the susceptibility of various microstructures to radiation damage for advanced energy applications.

Microstructural evolution of neutron irradiated 3C-SiC

DOE PAGES

Sprouster, David J.; Koyanagi, Takaaki; Dooryhee, Eric; ...

2017-03-18

The microstructural response of neutron irradiated 3C-SiC have been investigated over a wide irradiation temperature and fluence range via qualitative and quantitative synchrotron-based X-ray diffraction characterization. Here, we identify several neutron fluence- and irradiation temperature-dependent changes in the microstructure, and directly highlight the specific defects introduced through the course of irradiation. By quantifying the microstructure, we aim to develop a more detailed understanding of the radiation response of SiC. Such studies are important to build mechanistic models of material performance and to understand the susceptibility of various microstructures to radiation damage for advanced energy applications.

Stressed Oxidation Life Prediction for C/SiC Composites

NASA Technical Reports Server (NTRS)

Levine, Stanley R.

2004-01-01

The residual strength and life of C/SiC is dominated by carbon interface and fiber oxidation if seal coat and matrix cracks are open to allow oxygen ingress. Crack opening is determined by the combination of thermal, mechanical and thermal expansion mismatch induced stresses. When cracks are open, life can be predicted by simple oxidation based models with reaction controlled kinetics at low temperature, and by gas phase diffusion controlled kinetics at high temperatures. Key life governing variables in these models include temperature, stress, initial strength, oxygen partial pressure, and total pressure. These models are described in this paper.

Infrared Imaging of Carbon and Ceramic Composites: Data Reproducibility

NASA Astrophysics Data System (ADS)

Knight, B.; Howard, D. R.; Ringermacher, H. I.; Hudson, L. D.

2010-02-01

Infrared NDE techniques have proven to be superior for imaging of flaws in ceramic matrix composites (CMC) and carbon silicon carbide composites (C/SiC). Not only can one obtain accurate depth gauging of flaws such as delaminations and layered porosity in complex-shaped components such as airfoils and other aeronautical components, but also excellent reproducibility of image data is obtainable using the STTOF (Synthetic Thermal Time-of-Flight) methodology. The imaging of large complex shapes is fast and reliable. This methodology as applied to large C/SiC flight components at the NASA Dryden Flight Research Center will be described.

Epitaxy of boron phosphide on AlN, 4H-SiC, 3C-SiC and ZrB2 substrates

NASA Astrophysics Data System (ADS)

Padavala, Balabalaji

The semiconductor boron phosphide (BP) has many outstanding features making it attractive for developing various electronic devices, including neutron detectors. In order to improve the efficiency of these devices, BP must have high crystal quality along with the best possible electrical properties. This research is focused on growing high quality crystalline BP films on a variety of superior substrates like AlN, 4H-SiC, 3C-SiC and ZrB2 by chemical vapor deposition. In particular, the influence of various parameters such as temperature, reactant flow rates, and substrate type and its crystalline orientation on the properties of BP films were studied in detail. Twin-free BP films were produced by depositing on off-axis 4H-SiC(0001) substrate tilted 4° toward [11¯00] and crystal symmetry matched zincblende 3C-SiC. BP crystalline quality improved at higher deposition temperature (1200°C) when deposited on AlN, 4H-SiC, whereas increased strain in 3C-SiC and increased boron segregation in ZrB2 at higher temperatures limited the best deposition temperature to below 1200°C. In addition, higher flow ratios of PH 3 to B2H6 resulted in smoother films and improved quality of BP on all substrates. The FWHM of the Raman peak (6.1 cm -1), XRD BP(111) peak FWHM (0.18°) and peak ratios of BP(111)/(200) = 5157 and BP(111)/(220) = 7226 measured on AlN/sapphire were the best values reported in the literature for BP epitaxial films. The undoped films on AlN/sapphire were n-type with a highest electron mobility of 37.8 cm2/V˙s and a lowest carrier concentration of 3.15x1018 cm -3. Raman imaging had lower values of FWHM (4.8 cm-1 ) and a standard deviation (0.56 cm-1) for BP films on AlN/sapphire compared to 4H-SiC, 3C-SiC substrates. X-ray diffraction and Raman spectroscopy revealed residual tensile strain in BP on 4H-SiC, 3C-SiC, ZrB2/4H-SiC, bulk AlN substrates while compressive strain was evident on AlN/sapphire and bulk ZrB2 substrates. Among the substrates studied, AlN/sapphire proved to be the best choice for BP epitaxy, even though it did not eliminate rotational twinning in BP. The substrates investigated in this work were found to be viable for BP epitaxy and show promising potential for further enhancement of BP properties.

Comparisons of Damage Evolution between 2D C/SiC and SiC/SiC Ceramic-Matrix Composites under Tension-Tension Cyclic Fatigue Loading at Room and Elevated Temperatures

PubMed Central

Li, Longbiao

2016-01-01

In this paper, comparisons of damage evolution between 2D C/SiC and SiC/SiC ceramic-matrix composites (CMCs) under tension–tension cyclic fatigue loading at room and elevated temperatures have been investigated. Fatigue hysteresis loops models considering multiple matrix cracking modes in 2D CMCs have been developed based on the damage mechanism of fiber sliding relative to the matrix in the interface debonded region. The relationships between the fatigue hysteresis loops, fatigue hysteresis dissipated energy, fatigue peak stress, matrix multiple cracking modes, and interface shear stress have been established. The effects of fiber volume fraction, fatigue peak stress and matrix cracking mode proportion on fatigue hysteresis dissipated energy and interface debonding and sliding have been analyzed. The experimental fatigue hysteresis dissipated energy of 2D C/SiC and SiC/SiC composites at room temperature, 550 °C, 800 °C, and 1100 °C in air, and 1200 °C in vacuum corresponding to different fatigue peak stresses and cycle numbers have been analyzed. The interface shear stress degradation rate has been obtained through comparing the experimental fatigue hysteresis dissipated energy with theoretical values. Fatigue damage evolution in C/SiC and SiC/SiC composites has been compared using damage parameters of fatigue hysteresis dissipated energy and interface shear stress degradation rate. It was found that the interface shear stress degradation rate increases at elevated temperature in air compared with that at room temperature, decreases with increasing loading frequency at room temperature, and increases with increasing fatigue peak stress at room and elevated temperatures. PMID:28773966

[Cardiology writings in New Spain and in the first century of the Independent period].

PubMed

de Micheli, Alfredo

2015-01-01

The first writings on cardioangiology found in public and private libraries of New Spain from the xvi century to the first century of the Independent period in Mexico are mentioned. These go from the truly incunabular ones, books printed until the year 1500, to the physiology treatises published by European authors in the xvii and xviii centuries, as well as the cardiology texts from French authors of the first half of the xix century. The writings were depicted in the catalogs of the University library, founded in 1762, as well as in the library of a master builder of the Metropolitan Cathedral of the xvii century and that of a physician of the xviii century, Dr. José Ignacio Bartolache. The latter, in turn, edited for a brief period, from October 1772 to February 1773, a scientific-medical journal, «Mercurio Volante», which was the first scientific-hebdomadary publication in the Americas. Likewise, in the libraries of New Spain, several European scientific journals could be found, such as the one edited by the abbot Rozier, in which the initial writings of Lavoisier appeared. The exchange of ideas and knowledge, pointed out herein, attests to the always enthused interest of given individuals from New Spain on the boundless and passionate domains of cardioangiology. Copyright © 2013 Instituto Nacional de Cardiología Ignacio Chávez. Published by Masson Doyma México S.A. All rights reserved.

A Soft Take-Off in the Direction of "Bologna"

ERIC Educational Resources Information Center

Casaravilla Gil, Ana; Cava, Maria Victoria Cuevas; del Rio Merino, Mercedes; Arrebola, Carmen Vinas

2011-01-01

In the 2009-2010 academic year, ten new degrees have begun to be taught at the UPM (Universidad Politecnica Madrid), which is the first group of degrees that this university will offer within the framework of the EHEA (European Higher Education Area). One of these new degrees is the Building Engineering Degree, which was implemented in September…

Exploring the Factors Influencing UPM English Language Faculty Members' Adoption and Integration of Web-Based Instruction (WBI)

ERIC Educational Resources Information Center

Sayadian, Sima; Mukundan, Jayakaran; Baki, Roselan

2009-01-01

Technology, if integrated effectively, has been found to influence students' academic performance, develop their higher order thinking and problem solving, improve their motivation, attitude, and interest in learning, and help them prepare for the workforce as well as address the needs of low performing, at-risk, and learning impaired students…

75 FR 7031 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-16

... investigation resulting in-- (A) An affirmative determination of serious injury or threat thereof under section... Connection and Manpower, Vadnais Heights, MN, June 30, 2008. TA-W-71,807; B & C Machine Company, Barberton..., Northwest Division, Renton, WA, June 5, 2008. TA-W-71,258; UPM Raflatac, Inc., Leased Workers from Manpower...

Stroke-induced immunodepression and dysphagia independently predict stroke-associated pneumonia - The PREDICT study.

PubMed

Hoffmann, Sarah; Harms, Hendrik; Ulm, Lena; Nabavi, Darius G; Mackert, Bruno-Marcel; Schmehl, Ingo; Jungehulsing, Gerhard J; Montaner, Joan; Bustamante, Alejandro; Hermans, Marcella; Hamilton, Frank; Göhler, Jos; Malzahn, Uwe; Malsch, Carolin; Heuschmann, Peter U; Meisel, Christian; Meisel, Andreas

2017-12-01

Stroke-associated pneumonia is a frequent complication after stroke associated with poor outcome. Dysphagia is a known risk factor for stroke-associated pneumonia but accumulating evidence suggests that stroke induces an immunodepressive state increasing susceptibility for stroke-associated pneumonia. We aimed to confirm that stroke-induced immunodepression syndrome is associated with stroke-associated pneumonia independently from dysphagia by investigating the predictive properties of monocytic HLA-DR expression as a marker of immunodepression as well as biomarkers for inflammation (interleukin-6) and infection (lipopolysaccharide-binding protein). This was a prospective, multicenter study with 11 study sites in Germany and Spain, including 486 patients with acute ischemic stroke. Daily screening for stroke-associated pneumonia, dysphagia and biomarkers was performed. Frequency of stroke-associated pneumonia was 5.2%. Dysphagia and decreased monocytic HLA-DR were independent predictors for stroke-associated pneumonia in multivariable regression analysis. Proportion of pneumonia ranged between 0.9% in the higher monocytic HLA-DR quartile (≥21,876 mAb/cell) and 8.5% in the lower quartile (≤12,369 mAb/cell). In the presence of dysphagia, proportion of pneumonia increased to 5.9% and 18.8%, respectively. Patients without dysphagia and normal monocytic HLA-DR expression had no stroke-associated pneumonia risk. We demonstrate that dysphagia and stroke-induced immunodepression syndrome are independent risk factors for stroke-associated pneumonia. Screening for immunodepression and dysphagia might be useful for identifying patients at high risk for stroke-associated pneumonia.

A tool for automated diabetic retinopathy pre-screening based on retinal image computer analysis.

PubMed

Gegundez-Arias, Manuel E; Marin, Diego; Ponte, Beatriz; Alvarez, Fatima; Garrido, Javier; Ortega, Carlos; Vasallo, Manuel J; Bravo, Jose M

2017-09-01

This paper presents a methodology and first results of an automatic detection system of first signs of Diabetic Retinopathy (DR) in fundus images, developed for the Health Ministry of the Andalusian Regional Government (Spain). The system detects the presence of microaneurysms and haemorrhages in retinography by means of techniques of digital image processing and supervised classification. Evaluation was conducted on 1058 images of 529 diabetic patients at risk of presenting evidence of DR (an image of each eye is provided). To this end, a ground-truth diagnosis was created based on gradations performed by 3 independent ophthalmology specialists. The comparison between the diagnosis provided by the system and the reference clinical diagnosis shows that the system can work at a level of sensitivity that is similar to that achieved by experts (0.9380 sensitivity per patient against 0.9416 sensitivity of several specialists). False negatives have proven to be mild cases. Moreover, while the specificity of the system is significantly lower than that of human graders (0.5098), it is high enough to screen more than half of the patients unaffected by the disease. Results are promising in integrating this system in DR screening programmes. At an early stage, the system could act as a pre-screening system, by screening healthy patients (with no obvious signs of DR) and identifying only those presenting signs of the disease. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effective defect diffusion lengths in Ar-ion bombarded 3C-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bayu Aji, L. B.; Wallace, J. B.; Shao, L.

Above room temperature, SiC exhibits pronounced processes of diffusion and interaction of radiation-generated point defects. Here, we use the recently developed pulsed ion beam method to measure effective defect diffusion lengths in 3C-SiC bombarded in the temperature range of 25–200 °C with 500 keV Ar ions. Results reveal a diffusion length of ~10 nm, which exhibits a weak temperature dependence, changing from 9 to 13 nm with increasing temperature. Lastly, these results have important implications for understanding and predicting radiation damage in SiC and for the development of radiation-resistant materials via interface-mediated defect reactions.

Synthesis of 4-amino-5-H-2,3-dihydroisothiazole-1,1-dioxide ring systems on sugar templates via carbanion-mediated sulfonamide intramolecular cyclization reactions (CSIC protocols) of glyco-alpha-sulfonamidonitriles.

PubMed

Domínguez, Laura; van Nhien, Albert Nguyen; Tomassi, Cyrille; Len, Christophe; Postel, Denis; Marco-Contelles, José

2004-02-06

The carbanion-mediated sulfonate intramolecular cyclizations (CSIC protocols) of glyco-alpha-sulfonamidonitriles derived from readily available monosaccharides have been extensively investigated using potassium carbonate, cesium carbonate, n-BuLi, and LDA as bases. As a result, a series of enantiomerically pure spiro(4-amino-5-H-2,3-dihydroisothiazole-1,1-dioxide) derivatives have been prepared efficiently and isolated in good yield. The synthesis of these new bicyclic systems is key to accessing a novel range of aza analogues of TSAO nucleosides (ATSAOs).

Effective defect diffusion lengths in Ar-ion bombarded 3C-SiC

DOE PAGES

Bayu Aji, L. B.; Wallace, J. B.; Shao, L.; ...

2016-04-14

Above room temperature, SiC exhibits pronounced processes of diffusion and interaction of radiation-generated point defects. Here, we use the recently developed pulsed ion beam method to measure effective defect diffusion lengths in 3C-SiC bombarded in the temperature range of 25–200 °C with 500 keV Ar ions. Results reveal a diffusion length of ~10 nm, which exhibits a weak temperature dependence, changing from 9 to 13 nm with increasing temperature. Lastly, these results have important implications for understanding and predicting radiation damage in SiC and for the development of radiation-resistant materials via interface-mediated defect reactions.

Growth and characterizaton of 3C-SiC and 6H-SiC films on 6H-SiC wafers

NASA Technical Reports Server (NTRS)

Powell, J. A.; Petit, J. B.; Matus, L. G.; Lempner, S. E.

1992-01-01

Single crystal SiC films were grown by CVD on vicinal (0001) SiC wafers cut from boules produced by the modified sublimation method. Wafers with tilt angles less than 0.5 deg yielded 3C-SiC; tilt angles of 3 to 4 deg resulted in 6H-SiC films. The surface morphology of these films, up to 24 microns thick, were investigated as a function of growth parameters such as the Si/C ratio in the input gases and the presence of dopant materials such as nitrogen and trimethylaluminum.

Active Metal Brazing and Characterization of Brazed Joints in C-C and C-SiC Composites to Copper-Clad-Molybdenum System

NASA Technical Reports Server (NTRS)

Singh, M.; Asthana, R.

2008-01-01

Carbon/carbon composites with CVI and resin-derived matrices, and C/SiC composites reinforced with T-300 carbon fibers in a CVI SiC matrix were joined to Cu-clad Mo using two Ag-Cu braze alloys, Cusil-ABA (1.75% Ti) and Ticusil (4.5% Ti). The brazed joints revealed good interfacial bonding, preferential precipitation of Ti at the composite/braze interface, and a tendency toward delamination in resin-derived C/C composite. Extensive braze penetration of the inter-fiber channels in the CVI C/C composites was observed. The Knoop microhardness (HK) distribution across the C/C joints indicated sharp gradients at the interface, and a higher hardness in Ticusil than in Cusil-ABA. For the C/SiC composite to Cu-clad-Mo joints, the effect of composite surface preparation revealed that ground samples did not crack whereas unground samples cracked. Calculated strain energy in brazed joints in both systems is comparable to the strain energy in a number of other ceramic/metal systems. Theoretical predictions of the effective thermal resistance suggest that such joined systems may be promising for thermal management applications.

The synthesis of nanostructured SiC from waste plastics and silicon powder

NASA Astrophysics Data System (ADS)

Ju, Zhicheng; Xu, Liqiang; Pang, Qiaolian; Xing, Zheng; Ma, Xiaojian; Qian, Yitai

2009-09-01

Waste plastics constitute a growing environmental problem. Therefore, the treatment of waste plastics should be considered. Here we synthesize 3C-SiC nanomaterials coexisting with amorphous graphite particles utilizing waste plastics and Si powder at 350-500 °C in a stainless steel autoclave. 3C-SiC could be finally obtained after refluxing with aqueous HClO4 (70 wt%) at 180 °C. X-ray powder diffraction patterns indicate that the product is 3C-SiC with the calculated lattice constant a = 4.36 Å. Transmission electron microscopy (TEM) images show that the SiC samples presented two morphologies: hexagonal platelets prepared by the waste detergent bottles or beverage bottles and nanowires prepared by waste plastic bags respectively. The corresponding selected area electron diffraction (SAED) pattern indicates that either the entire hexagonal platelet or the nanowire is single crystalline. High-resolution TEM shows the planar surfaces of the SiC platelet correspond to {111} planes; the lateral surfaces are {110} planes and the preferential growth direction of the nanowires is along [111]. The output of SiC was ~39% based on the amount of Si powder.

Thermodynamic and Kinetic Properties of Intrinsic Defects and Mg Transmutants in 3C-SiC Determined by Density Functional Theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Shenyang Y.; Setyawan, Wahyu; Van Ginhoven, Renee M.

2014-02-20

Density functional theory (DFT) is used to calculate the thermodynamic and kinetic properties of transmutant Mg in 3C-SiC due to high-energy neutron irradiation associated with the fusion nuclear environment. The formation and binding energies of intrinsic defects, Mg-related defects, and clusters in 3C-SiC are systematically calculated. The minimum energy paths and activation energies during point defect migration and small cluster evolution are studied using a generalized solid-state elastic band (G-SSNEB) method with DFT energy calculations. Stable defect structures and possible defect migration mechanisms are identified. The evolution of binding energies during Mg2Si formation demonstrates that the formation of Mg2Si needsmore » to overcome a critical nucleus size and nucleation barrier. It is also found that a compressive stress field exists around the Mg2Si nucleus. These data are important inputs in meso- and macro-scale modeling and experiments to understand and predict the impact of Mg on phase stability, microstructure evolution, and performance of SiC and SiC-based materials during long-term neutron exposures.« less

Simulation of Complex Cracking in Plain Weave C/SiC Composite under Biaxial Loading

NASA Technical Reports Server (NTRS)

Cheng, Ron-Bin; Hsu, Su-Yuen

2012-01-01

Finite element analysis is performed on a mesh, based on computed geometry of a plain weave C/SiC composite with assumed internal stacking, to reveal the pattern of internal damage due to biaxial normal cyclic loading. The simulation encompasses intertow matrix cracking, matrix cracking inside the tows, and separation at the tow-intertow matrix and tow-tow interfaces. All these dissipative behaviors are represented by traction-separation cohesive laws. Not aimed at quantitatively predicting the overall stress-strain relation, the simulation, however, does not take the actual process of fiber debonding into account. The fiber tows are represented by a simple rule-of-mixture model where the reinforcing phase is a hypothetical one-dimensional material. Numerical results indicate that for the plain weave C/SiC composite, 1) matrix-crack initiation sites are primarily determined by large intertow matrix voids and interlayer tow-tow contacts, 2) the pattern of internal damage strongly depends on the loading path and initial stress, 3) compressive loading inflicts virtually no damage evolution. KEY WORDS: ceramic matrix composite, plain weave, cohesive model, brittle failure, smeared crack model, progressive damage, meso-mechanical analysis, finite element.

Doxycycline-rifampin versus doxycycline-streptomycin in treatment of human brucellosis due to Brucella melitensis. The GECMEI Group. Grupo de Estudio de Castilla-la Mancha de Enfermedades Infecciosas.

PubMed

Solera, J; Rodríguez-Zapata, M; Geijo, P; Largo, J; Paulino, J; Sáez, L; Martínez-Alfaro, E; Sánchez, L; Sepulveda, M A; Ruiz-Ribó, M D

1995-09-01

Brucellosis is a common zoonosis in many parts of the world; the best regimen for the treatment of brucellosis has not been clearly determined. We have carried out a multicenter, open, controlled trial in five general hospitals in Spain to compare the efficacy and safety of doxycycline and rifampin (DR) versus doxycycline and streptomycin (DS) for the treatment of human brucellosis. The study included 194 ambulatory or hospitalized patients with acute brucellosis, without endocarditis or neurobrucellosis. The diagnostic criterion was isolation of Brucella species from blood or other tissues (n = 120) or a standard tube agglutination titer of 1/160 or more for anti-Brucella antibodies with compatible clinical findings (n = 74). Patients were randomly assigned to receive either 100 mg of doxycycline twice daily plus rifampin, 900 mg/day, in a single morning dose for 45 days (DR group) or the same dose of doxycycline for 45 days plus streptomycin, 1 g/day, intramuscularly for 14 days (DS group). A lack of therapeutic efficacy developed in 8 of the 100 patients in the DR group (8%) and in 2 of the 94 patients in the DS group (2%)(P = 0.10). Relapses occurred in 16 of the 100 patients in the DR group (16%) but in only 5 of the 94 patients in the DS group (5.3%) (P = 0.02). When relapse was considered in combination with initial lack of efficacy, 26 patients in the DR group (24%) and 7 patients in the DS group (7.45%) failed to respond to therapy (P = 0.0016). In general, therapy was well tolerated and only four patients (4%) in the DR group and two (2%) in the DS group had episodes of adverse effects necessitating discontinuation of treatment (P> 0.2). We conclude that a doxycycline-and-rifampin regimen is less effective than the doxycycline-and-streptomycin regimen in patients with acute brucellosis.

Selecting the minimum prediction base of historical data to perform 5-year predictions of the cancer burden: The GoF-optimal method.

PubMed

Valls, Joan; Castellà, Gerard; Dyba, Tadeusz; Clèries, Ramon

2015-06-01

Predicting the future burden of cancer is a key issue for health services planning, where a method for selecting the predictive model and the prediction base is a challenge. A method, named here Goodness-of-Fit optimal (GoF-optimal), is presented to determine the minimum prediction base of historical data to perform 5-year predictions of the number of new cancer cases or deaths. An empirical ex-post evaluation exercise for cancer mortality data in Spain and cancer incidence in Finland using simple linear and log-linear Poisson models was performed. Prediction bases were considered within the time periods 1951-2006 in Spain and 1975-2007 in Finland, and then predictions were made for 37 and 33 single years in these periods, respectively. The performance of three fixed different prediction bases (last 5, 10, and 20 years of historical data) was compared to that of the prediction base determined by the GoF-optimal method. The coverage (COV) of the 95% prediction interval and the discrepancy ratio (DR) were calculated to assess the success of the prediction. The results showed that (i) models using the prediction base selected through GoF-optimal method reached the highest COV and the lowest DR and (ii) the best alternative strategy to GoF-optimal was the one using the base of prediction of 5-years. The GoF-optimal approach can be used as a selection criterion in order to find an adequate base of prediction. Copyright © 2015 Elsevier Ltd. All rights reserved.

Laser induced local structural and property modifications in semiconductors for electronic and photonic superstructures - Silicon carbide to graphene conversion

NASA Astrophysics Data System (ADS)

Yue, Naili

Graphene is a single atomic layer two-dimensional (2D) hexagonal crystal of carbon atoms with sp2-bonding. Because of its various special or unique properties, graphene has attracted huge attention and considerable interest in recent years. This PhD research work focuses on the development of a novel approach to fabricating graphene micro- and nano-structures using a 532 nm Nd:YAG laser, a technique based on local conversion of 3C-SiC thin film into graphene. Different from other reported laser-induced graphene on single crystalline 4H- or 6H- SiC, this study focus on 3C-SiC polycrystal film grown using MBE. Because the SiC thin film is grown on silicon wafer, this approach may potentially lead to various new technologies that are compatible with those of Si microelectronics for fabricating graphene-based electronic, optoelectronic, and photonic devices. The growth conditions for depositing 3C-SiC using MBE on Si wafers with three orientations, (100), (110), and (111), were evaluated and explored. The surface morphology and crystalline structure of 3C-SiC epilayer were investigated with SEM, AFM, XRD, μ-Raman, and TEM. The laser modification process to convert 3C-SiC into graphene layers has been developed and optimized by studying the quality dependence of the graphene layers on incident power, irradiation time, and surface morphology of the SiC film. The laser and power density used in this study which focused on thin film SiC was compared with those used in other related research works which focused on bulk SiC. The laser-induced graphene was characterized with μ-Raman, SEM/EDS, TEM, AFM, and, I-V curve tracer. Selective deposition of 3C-SiC thin film on patterned Si substrate with SiO2 as deposition mask has been demonstrated, which may allow the realization of graphene nanostructures (e.g., dots and ribbons) smaller than the diffraction limit spot size of the laser beam, down to the order of 100 nm. The electrical conductance of directly written graphene micro-ribbon (< 1 μm) was measured via overlaying two micro-electrodes using e-beam lithography and e-beam evaporation. The crystalline quality (stacking order, defect or disorder, strain, crystallite size, etc.) of laser-induced graphene was analyzed using Raman spectroscopy through the comparison with pristine natural graphite and CVD-grown monolayer graphene on SiO2/Si and other substrates. The experimental results reveal the feasibility of laser modification techniques as an efficient, inexpensive, and versatile (any shape and location) means in local synthesis of graphene, especially in patterning graphene nanostructures. Different from other laser induced graphene research works, which were concentrated on bulk SiC wafers, this PhD research work focuses on thin film SiC grown on Si (111) for the first time.

[Influence of anesthesia and antisepsis on the earliest gynecologic laparotomies: historical notes on the bicentennial of the introduction of ovariectomy].

PubMed

Franco Grande, A; Cortés Laíño, J; Díz Gómez, J C; Alvarez Escudero, J

2009-05-01

On the occasion of the bicentennial of the first ovariectomy, we reviewed the beginnings of abdominal gynecologic surgery in Spain in order to shed light on aspects that are still unclear in medical historiography and that are often wrongly presented. We consulted a large number of sources that allowed us to follow events in the last quarter of the nineteenth century, discovering information we consider definitive and that confirmed our initial hypotheses. The work of Dr Federico Rubio, the first to perform an ovariectomy in Spain, is highlighted among the early experiences of our Spanish surgeons. Emphasis is placed on the high mortality rate associated with this operation at the beginning. We also analyze the problems of anesthesia and antisepsis and the influence of each on the surgical procedure. The events uncovered were the work of a group of forward-thinking surgeons who made considerable progress against opposing groups with more conservative views and whose contributions to Spanish surgery were far less brilliant.

Cephalopod biology and care, a COST FA1301 (CephsInAction) training school: anaesthesia and scientific procedures.

PubMed

Lopes, Vanessa M; Sampaio, Eduardo; Roumbedakis, Katina; Tanaka, Nobuaki K; Carulla, Lucía; Gambús, Guillermo; Woo, Theodosia; Martins, Catarina P P; Penicaud, Virginie; Gibbings, Colette; Eberle, Jessica; Tedesco, Perla; Fernández, Isabel; Rodríguez-González, Tania; Imperadore, Pamela; Ponte, Giovanna; Fiorito, Graziano

2017-09-01

Cephalopods are the sole invertebrates included in the list of regulated species following the Directive 2010/63/EU. According to the Directive, achieving competence through adequate training is a requisite for people having a role in the different functions (article 23) as such carrying out procedures on animals, designing procedures and projects, taking care of animals, killing animals. Cephalopod Biology and Care Training Program is specifically designed to comply with the requirements of the "working document on the development of a common education and training framework to fulfil the requirements under the Directive 2010/63/EU". The training event occurred at the ICM-CSIC in Barcelona (Spain) where people coming from Europe, America and Asia were instructed on how to cope with regulations for the use of cephalopod molluscs for scientific purposes. The training encompasses discussion on the guidelines for the use and care of animals and their welfare with particular reference to procedures that may be of interest for neuroscience. Intensive discussion has been carried out during the training sessions with focus on behavioural studies and paradigms, welfare assessment, levels of severity of scientific procedures, animal care, handling, transport, individual identification and marking, substance administration, anaesthesia, analgesia and humane killing.

Ductile and brittle transition behavior of titanium alloys in ultra-precision machining.

PubMed

Yip, W S; To, S

2018-03-02

Titanium alloys are extensively applied in biomedical industries due to their excellent material properties. However, they are recognized as difficult to cut materials due to their low thermal conductivity, which induces a complexity to their deformation mechanisms and restricts precise productions. This paper presents a new observation about the removal regime of titanium alloys. The experimental results, including the chip formation, thrust force signal and surface profile, showed that there was a critical cutting distance to achieve better surface integrity of machined surface. The machined areas with better surface roughness were located before the clear transition point, defining as the ductile to brittle transition. The machined area at the brittle region displayed the fracture deformation which showed cracks on the surface edge. The relationship between depth of cut and the ductile to brittle transaction behavior of titanium alloys in ultra-precision machining(UPM) was also revealed in this study, it showed that the ductile to brittle transaction behavior of titanium alloys occurred mainly at relatively small depth of cut. The study firstly defines the ductile to brittle transition behavior of titanium alloys in UPM, contributing the information of ductile machining as an optimal machining condition for precise productions of titanium alloys.

Evolution of the teachings of chemistry in the new degrees of School of Agricultural Engineering and its importance in the acquisition of competencies

NASA Astrophysics Data System (ADS)

Arce, Augusto; Tarquis, Ana M.; Castellanos, Maria Teresa; Requejo, Maria Isabel; Cartagena, Maria Carmen

2014-05-01

The academic year 2012-13 is the third year of implementation of the Bologna process in ETSI Agricultural for the subjects Chemistry I and Chemistry II in the new four Degrees: Graduate in Engineering and Agricultural Science, Food Engineering Graduate, Graduate in Engineering Environmental and Biotechnology graduate. We have implemented new interactive methodologies in the teaching-learning process based on the use of the virtual platform of the UPM, and teaching support materials and new laboratory practice developing has. It has also launched new continuous assessment systems that promote active student participation. A comparative study of academic achievements by students of the new grades in the subjects of chemistry during the last three academic years was performed to correlating the results obtained, the success rate and the drop out, and compare with the level of prior knowledge to those entering students. Possible solutions to try and fix these results in future courses are proposed Finally, the general competencies that contribute this course, how they are acquired and how they should be evaluated correctly are indicated. Acknowledgments: Innovation educative projects Nº IE02054-11/12 UPM. 2012

Greenhouse gas (GHG) emission in organic farming. Approximate quantification of its generation at the organic garden of the School of Agricultural, Food and Biosystems Engineering (ETSIAAB) in the Technical University of Madrid (UPM)

NASA Astrophysics Data System (ADS)

Campos, Jorge; Barbado, Elena; Maldonado, Mariano; Andreu, Gemma; López de Fuentes, Pilar

2016-04-01

As it well-known, agricultural soil fertilization increases the rate of greenhouse gas (GHG) emission production such as CO2, CH4 and N2O. Participation share of this activity on the climate change is currently under study, as well as the mitigation possibilities. In this context, we considered that it would be interesting to know how this share is in the case of organic farming. In relation to this, a field experiment was carried out at the organic garden of the School of Agricultural, Food and Biosystems Engineering (ETSIAAB) in the Technical University of Madrid (UPM). The orchard included different management growing areas, corresponding to different schools of organic farming. Soil and gas samples were taken from these different sites. Gas samples were collected throughout the growing season from an accumulated atmosphere inside static chambers inserted into the soil. Then, these samples were carried to the laboratory and there analyzed. The results obtained allow knowing approximately how ecological fertilization contributes to air pollution due to greenhouse gases.

Characterization of Damage Accumulation in a C/SiC Composite at Elevated Temperatures

NASA Technical Reports Server (NTRS)

Telesman, Jack; Verrilli, Mike; Ghosn, Louis; Kantzos, Pete

1997-01-01

This research is part of a program aimed to evaluate and demonstrate the ability of candidate CMC materials for a variety of applications in reusable launch vehicles. The life and durability of these materials in rocket and engine applications are of major concern and there is a need to develop and validate life prediction methodology. In this study, material characterization and mechanical testing was performed in order to identify the failure modes, degradation mechanisms, and progression of damage in a C/SiC composite at elevated temperatures. The motivation for this work is to provide the relevant damage information that will form the basis for the development of a physically based life prediction methodology.

TomoEED: Fast Edge-Enhancing Denoising of Tomographic Volumes.

PubMed

Moreno, J J; Martínez-Sánchez, A; Martínez, J A; Garzón, E M; Fernández, J J

2018-05-29

TomoEED is an optimized software tool for fast feature-preserving noise filtering of large 3D tomographic volumes on CPUs and GPUs. The tool is based on the anisotropic nonlinear diffusion method. It has been developed with special emphasis in the reduction of the computational demands by using different strategies, from the algorithmic to the high performance computing perspectives. TomoEED manages to filter large volumes in a matter of minutes in standard computers. TomoEED has been developed in C. It is available for Linux platforms at http://www.cnb.csic.es/%7ejjfernandez/tomoeed. gmartin@ual.es, JJ.Fernandez@csic.es. Supplementary data are available at Bioinformatics online.

Step Free Surface Heteroepitaxy of 3C-SiC Layers on Patterned 4H/6H-SiC Mesas and Cantilevers

NASA Technical Reports Server (NTRS)

Neudeck, P. G.; Powell, J. A.; Trunek, A. J.; Spry, D. J.

2004-01-01

The off-axis approach to SiC epitaxial growth has not prevented many substrate crystal defects from propagating into SiC epilayers, and does not permit the realization of SiC heteropolytype devices. This paper reviews recent advancements in SiC epitaxial growth that begin to overcome the above shortcomings for arrays of device-sized mesas patterned into on-axis 4H/6HSiC wafers. These on-axis mesa growth techniques have produced 4H/6H-SiC homoepilayers and 3C-SiC heteroepilayers with substantially lower dislocation densities. The results should enable improved homojunction and heterojunction silicon carbide prototype devices.

Guinean Population Emigrant to Spain Has Very Little Awareness of the Donation and Transplantation of Organs.

PubMed

Ríos, A; Carrillo, J; López-Navas, A I; Martínez-Alarcón, L; Ayala, M A; Garrido, G; Ramis, G; Hernández, A M; Ramírez, P; Parrilla, P

2018-03-01

The Guinean population is an emerging group in Europe, but the group's awareness of organ donation and transplantation has not been studied. To analyze the attitude toward organ donation among the population born in Guinea living in Spain. The population older than 15 years, born in Guinea, and resident in Spain was studied, stratified by age and sex, according to census data and immigrant assistance associations. The valuation tool used was the attitude questionnaire toward organ donation PCID-DTO RIOS (questionnaire on "Donor International Collaborative Project" on organ donation and transplantation developed by Dr Ríos). A random selection of people to survey was based on stratification. Support from African immigration support associations was needed to advise on the location of potential respondents. The completion was anonymous and self-administered. A descriptive statistic was performed, and Student t, χ 2 , and Fisher tests and a logistic regression analysis were applied. In all, 181 Guineans were surveyed, of whom 32% (n = 58) were in favor of the donation of their own organs after death, 32% (n = 57) were against, and 36% (n = 66) were undecided. The variables that are associated with attitude toward donation are separated mainly into 4 large groups (P < .001): (1) knowledge about the process of donation and organ transplantation; (2) attitude toward the manipulation of the body; (3) religious variables; and (4) sociofamily variables, especially in relation to the couple. The Guinean population emigrant to Spain has an unfriendly attitude toward organ donation. Copyright © 2017 Elsevier Inc. All rights reserved.

Operational air quality forecasting system for Spain: CALIOPE

NASA Astrophysics Data System (ADS)

Baldasano, J. M.; Piot, M.; Jorba, O.; Goncalves, M.; Pay, M.; Pirez, C.; Lopez, E.; Gasso, S.; Martin, F.; García-Vivanco, M.; Palomino, I.; Querol, X.; Pandolfi, M.; Dieguez, J. J.; Padilla, L.

2009-12-01

The European Commission (EC) and the United States Environmental Protection Agency (US-EPA) have shown great concerns to understand the transport and dynamics of pollutants in the atmosphere. According to the European directives (1996/62/EC, 2002/3/EC, 2008/50/EC), air quality modeling, if accurately applied, is a useful tool to understand the dynamics of air pollutants, to analyze and forecast the air quality, and to develop programs reducing emissions and alert the population when health-related issues occur. The CALIOPE project, funded by the Spanish Ministry of the Environment, has the main objective to establish an air quality forecasting system for Spain. A partnership of four research institutions composes the CALIOPE project: the Barcelona Supercomputing Center (BSC), the center of investigation CIEMAT, the Earth Sciences Institute ‘Jaume Almera’ (IJA-CSIC) and the CEAM Foundation. CALIOPE will become the official Spanish air quality operational system. This contribution focuses on the recent developments and implementation of the integrated modelling system for the Iberian Peninsula (IP) and Canary Islands (CI) with a high spatial and temporal resolution (4x4 sq. km for IP and 2x2 sq. km for CI, 1 hour), namely WRF-ARW/HERMES04/CMAQ/BSC-DREAM. The HERMES04 emission model has been specifically developed as a high-resolution (1x1 sq. km, 1 hour) emission model for Spain. It includes biogenic and anthropogenic emissions such as on-road and paved-road resuspension production, power plant generation, ship and plane traffic, airports and ports activities, industrial and agricultural sectors as well as domestic and commercial emissions. The qualitative and quantitative evaluation of the model was performed for a reference year (2004) using data from ground-based measurement networks. The products of the CALIOPE system will provide 24h and 48h forecasts for O3, NO2, SO2, CO, PM10 and PM2.5 at surface level. An operational evaluation system has been developed to provide near real-time evaluation products for the Spanish territory. For this purpose, more than 130 surface stations, 2 ozonesondes and the OMI satellite retrieval information are introduced to the system on a daily basis. A web-based visualization system allows a straightforward access to all the evaluation products. The present contribution will describe the main characteristics of the operational system and results of the operational evaluation.

PREFACE: 6th Meeting of the Spanish Neutron Scattering Association (SETN2012)

NASA Astrophysics Data System (ADS)

2014-11-01

The bi-annual Meeting of the Spanish Neutron Scattering Association, VI RSETN, took place in the magnificent world heritage ancient city of Segovia, Spain, from 24-27 June 2012, at the historical building ''Palacio de Mansilla''. It was the sixth in a series of successful scientific meetings, beginning in 2002 (San Sebastián), and followed by conferences in Puerto de la Cruz (Canary Islands, 2004), Jaca (Aragón, 2006), Sant Feliú de Guixols (Cataluña, 2008) and Gijón (Asturias, 2010). The conference covered a broad range of topics related to the use of neutron scattering techniques, from soft matter and biosciences to magnetism, condensed matter as well as advanced neutron instrumentation and applications. In addition to those topics, Spanish scientists working at neutron facilities reported recent upgrades of neutron instruments. The VI RSETN was organized by a group of research scientists belonging to different institutions in Madrid: CSIC, Universidad Complutense and Universidad Politécnica de Madrid, in cooperation with the Spanish Society for Neutron Techniques (SETN, 'Sociedad Española de Técnicas Neutrónicas'). The meeting attracted around 90 participants. The total number of oral presentations was 36, including plenary and invited talks, both from domestic and foreign speakers. In addition, the number of posters was around 20. The success of the VI RSETN was due to the efforts of many colleagues involved at all stages of the meeting. We would like to thank the scientific committee, the local organizing committee, the chairs of the conference sessions as well as all the reviewers who agreed generously to help with the process. We would also like to emphasize the excellent scientific quality of all the presentations and posters, and we thank the support received from our sponsors (SETN, ICMM-CSIC, ESS-Bilbao, ILL, Carburos Metálicos), which was really important for the conference success. Finally, we hope that the readers will enjoy the 28 scientific contributions contained in the present volume, which give an overview of the science and the engineering currently done by the Spanish neutron scattering community, a lively and growing community. Jorge Hernández-Velasco, Carlos Cabrillo, Marta Castellote, Jesus Ruiz-Hervias Conference Proceedings Editors

Immunosuppressive Drug Discontinuation in Noninfectious Uveitis From Real-Life Clinical Practice: A Survival Analysis.

PubMed

Abásolo, Lydia; Rosales, Zulema; Díaz-Valle, David; Gómez-Gómez, Alejandro; Peña-Blanco, Rayma C; Prieto-García, Ángela; Benítez-Del-Castillo, José Manuel; Pato, Esperanza; García-Feijoo, Julián; Fernández-Gutiérrez, Benjamín; Rodriguez-Rodriguez, Luis

2016-09-01

To assess in uveitis patients the rate of immunosuppressive drug (ISD) discontinuation in real-life clinical practice, comparing this rate among ISDs. Longitudinal retrospective cohort study. We included uveitis patients attending a tertiary eye referral center from Madrid (Spain) between 1989 and 2015, prescribed any ISDs (cyclosporine, methotrexate, azathioprine, anti-TNF drugs, or others). Our main outcome was discontinuation of all ISDs owing to clinical efficacy, inefficacy, adverse drug reaction (ADR), and other medical causes. Discontinuation rates (DRs) per 100 patient-years were estimated. Variables associated with specific-cause discontinuations were analyzed using Cox bivariate and multivariate models. We analyzed 110 patients with 263 treatment courses and 665.2 patient-years of observation. Cyclosporine (66.4%), methotrexate (47.3%), azathioprine (30.9%), and anti-TNFs (30.9%) were the most frequently used ISDs. Treatment was suspended in 136 cases (mostly owing to clinical efficacy [38.2%], inefficacy [26.5%], and ADRs [22.8%]). All-cause DR with 95% confidence interval was 20.4 [17.3-24.2]. Retention rates at 1 and 10 years were 74% and 16%, respectively. In the multivariate analysis, combined treatment exhibited higher DRs owing to clinical efficacy than other ISDs in monotherapy. Conversely, nonbiologic combination therapy with azathioprine exhibited the highest DR owing to ADRs. Clinical efficacy was the most frequent cause for ISD discontinuation, followed by inefficacy and ADRs. DR owing to efficacy was higher for combination therapy. Furthermore, nonbiologic combination therapy with azathioprine was associated with a higher DR owing to ADRs. Copyright © 2016 Elsevier Inc. All rights reserved.

Molecular dynamics modeling of atomic displacement cascades in 3C-SiC: Comparison of interatomic potentials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samolyuk, German D.; Osetskiy, Yury N.; Stoller, Roger E.

We used molecular dynamics modeling of atomic displacement cascades to characterize the nature of primary radiation damage in 3C-SiC. We demonstrated that the most commonly used interatomic potentials are inconsistent with ab initio calculations of defect energetics. Both the Tersoff potential used in this work and a modified embedded-atom method potential reveal a barrier to recombination of the carbon interstitial and carbon vacancy which is much higher than the density functional theory (DFT) results. The barrier obtained with a newer potential by Gao and Weber is closer to the DFT result. This difference results in significant differences in the cascademore » production of point defects. We have completed both 10 keV and 50 keV cascade simulations in 3C-SiC at a range of temperatures. In contrast to the Tersoff potential, the Gao-Weber potential produces almost twice as many C vacancies and interstitials at the time of maximum disorder (~0.2 ps) but only about 25% more stable defects at the end of the simulation. Only about 20% of the carbon defects produced with the Tersoff potential recombine during the in-cascade annealing phase, while about 60% recombine with the Gao-Weber potential.« less

Molecular dynamics modeling of atomic displacement cascades in 3C-SiC: Comparison of interatomic potentials

DOE PAGES

Samolyuk, German D.; Osetskiy, Yury N.; Stoller, Roger E.

2015-06-03

We used molecular dynamics modeling of atomic displacement cascades to characterize the nature of primary radiation damage in 3C-SiC. We demonstrated that the most commonly used interatomic potentials are inconsistent with ab initio calculations of defect energetics. Both the Tersoff potential used in this work and a modified embedded-atom method potential reveal a barrier to recombination of the carbon interstitial and carbon vacancy which is much higher than the density functional theory (DFT) results. The barrier obtained with a newer potential by Gao and Weber is closer to the DFT result. This difference results in significant differences in the cascademore » production of point defects. We have completed both 10 keV and 50 keV cascade simulations in 3C-SiC at a range of temperatures. In contrast to the Tersoff potential, the Gao-Weber potential produces almost twice as many C vacancies and interstitials at the time of maximum disorder (~0.2 ps) but only about 25% more stable defects at the end of the simulation. Only about 20% of the carbon defects produced with the Tersoff potential recombine during the in-cascade annealing phase, while about 60% recombine with the Gao-Weber potential.« less

Effect of nucleation on instability of step meandering during step-flow growth on vicinal 3C-SiC (0001) surfaces

NASA Astrophysics Data System (ADS)

Li, Yuan; Chen, Xuejiang; Su, Juan

2017-06-01

A three-dimensional kinetic Monte Carlo (KMC) model has been developed to study the step instability caused by nucleation during the step-flow growth of 3C-SiC. In the model, a lattice mesh was established to fix the position of atoms and bond partners based on the crystal lattice of 3C-SiC. The events considered in the model were adsorption and diffusion of adatoms on the terraces, attachment, detachment and interlayer transport of adatoms at the step edges, and nucleation of adatoms. Then the effects of nucleation on the instability of step meandering and the coalescence of both islands and steps were simulated by the model. The results showed that the instability of step meandering caused by nucleation was affected by the growth temperature. And the effects of nucleation on the instability was also analyzed. Moreover, the surface roughness as a function of time for different temperatures was discussed. Finally, a phase diagram was presented to predict in which conditions the effects of nucleation on step meandering become significant and the three different regimes, the step-flow (SF), 2D nucleation (2DN), and 3D layer by layer (3DLBL) were determined.

Heterojunction diodes in 3C-SiC/Si system grown by reactive magnetron sputtering: Effects of growth temperature on diode rectification and breakdown

NASA Astrophysics Data System (ADS)

Wahab, Q.; Karlsteen, M.; Nur, O.; Hultman, L.; Willander, M.; Sundgren, J.-E.

1996-09-01

3C-SiC/Si heterojunction diodes were prepared by reactive magnetron sputtering of pure Si in CH4-Ar discharge on Si(111) substrates kept at temperatures (Ts) ranging from 800 to 1000°C. A good diode rectification process started for films grown at Ts≤900°C. Heterojunction diodes grown at Ts = 850°C showed the best performance with a saturation current density of 2.4 × 10-4 A cm-2. Diode reverse breakdown was obtained at a voltage of -110 V. The doping concentration (Nd) of the 3C-SiC films was calculated from 1/C2 vs V plot to be 3 × 1015 cm-3. Band offset values obtained were -0.27 and 1.35 eV for the conduction and valence band, respectively. X-ray diffraction analysis revealed the film grown at Ts = 850°C to be single-phase 3C-SiC. The full width at half maximum of the 3C-SiC(111) peak was only 0.25 degree. Cross-sectional transmission electron microscopy showed the film to be highly (111)-oriented with an epitaxial columnar structure of double positioning domain boundaries.

CAB Contribution to HARMONI: The first light spectrograph of the E-ELT

NASA Astrophysics Data System (ADS)

Piqueras López, J.; Arribas, S.; Calcines, A.

2017-03-01

HARMONI (High Angular Resolution Monolithic Optical and Near-infrared Integral field spectrograph) is a visible and near-infrared (0.47 to 2.45 μm) integral field spectrograph selected as a first-light instrument for the European Extremely Large Telescope (E-ELT). With four spatial scales (60, 20, 10 and 4 mas) and a wide range of spectral resolving powers (R=3500, 7500, 20000), HARMONI will allow scientists to address many of the E-ELT science cases. The HARMONI Consortium is led by the University of Oxford, and is also formed by the UK Astronomy Technology Centre (UKATC, Edinburgh, UK), Centre de Recherche Astrophysique de Lyon (CRAL), Laboratoire d'Astrophysique de Marseille (LAM), Instituto de Astrofísica de Canarias (IAC, Spain) and the Centro de Astrobiología (CAB INTA-CSIC, Spain). We summarize here the current status of the project, and describe the participation of CAB to design and manufacture two of the instrument sub-systems: the calibration unit and the secondary guiding module. The calibration unit will simulate the optical output of the telescope, and provide the functionality needed to illuminate the focal plane in such a way that the following type of data can be obtained: data aimed at removing the instrumental signature from the raw data and to convert the data into a data product that uses physical units, data required for monitoring the status of the instrument, and data required for calibrating the secondary guiding subsystem. The secondary guiding subsystem basic requirement is to provide knowledge (relative or absolute) of the location of the science focal plane on timescales of a few seconds and longer (up to months), with an accuracy of 2mas or 0.1x the input FWHM (at H/K bands), whichever is greater. The subsystem should achieve this level performance for different observation modes, e.g. no- AO, GLAO and LTAO modes.

A new benchmark T8-9 brown dwarf and a couple of new mid-T dwarfs from the UKIDSS DR5+ LAS

NASA Astrophysics Data System (ADS)

Goldman, B.; Marsat, S.; Henning, T.; Clemens, C.; Greiner, J.

2010-06-01

Benchmark brown dwarfs are those objects for which fiducial constraints are available, including effective temperature, parallax, age and metallicity. We searched for new cool brown dwarfs in 186deg2 of the new area covered by the data release DR5+ of the UKIRT Deep Infrared Sky Survey (UKIDSS) Large Area Survey. Follow-up optical and near-infrared broad-band photometry, and methane imaging of four promising candidates, revealed three objects with distinct methane absorption, typical of mid- to late-T dwarfs and one possibly T4 dwarf. The latest-type object, classified as T8-9, shares its large proper motion with Ross 458 (BD+13o2618), an active M0.5 binary which is 102arcsec away, forming a hierarchical low-mass star+brown dwarf system. Ross 458C has an absolute J-band magnitude of 16.4, and seems overluminous, particularly in the K band, compared to similar field brown dwarfs. We estimate the age of the system to be less than 1Gyr, and its mass to be as low as 14 Jupiter masses for the age of 1Gyr. At 11.4pc, this new late-T benchmark dwarf is a promising target to constrain the evolutionary and atmospheric models of very low-mass brown dwarfs. We present proper motion measurements for our targets and for 13 known brown dwarfs. Two brown dwarfs have velocities typical of the thick disc and may be old brown dwarfs. Based on observations collected at the German-Spanish Astronomical Center, Calar Alto, jointly operated by the Max-Planck Institut für Astronomie Heidelberg and the Instituto de Astrofísica de Andaluc'a (CSIC), and on observations made with ESO/MPG Telescope at the La Silla Observatory under programme ID 081.A-9012 and 081.A-9014. E-mail: goldman@mpia.de

The Burden of Respiratory Disease in Very-Low-Birth-Weight Infants: Changes in Perinatal Care and Outcomes in a Decade in Spain.

PubMed

García-Muñoz Rodrigo, Fermín; Losada Martínez, Antonio; Elorza Fernández, María Dolores; Moreno Hernando, Julio; Figueras Aloy, Josep; Vento Torres, Máximo

2017-01-01

Advances in perinatal care have led to a significant reduction in morbidity and mortality among very-low-birth-weight (VLBW) infants. Much of this progress is related to the prevention and management of respiratory disease. To evaluate changes in perinatal care and its influence on respiratory morbidity and mortality among VLBW infants in Spain in 2 consecutive periods (2002-2006 and 2007-2011). This is a retrospective analysis of data prospectively collected of all VLBW infants included in the Spanish SEN1500 network. Patients with major congenital anomalies, those who died in the delivery room (DR) and infants <230 or >346 weeks of gestational age (GA) were excluded. During the study period, out of 27,205 eligible VLBW infants, 24,598 (90.4%) met inclusion criteria. The most striking and statistically significant results found in the second period were: (i) reduction in the proportion of "outborn" patients; (ii) an increase in prenatal steroid administration; (iii) enhanced non-invasive respiratory support in the DR and NICU; (iv) reduction in invasive mechanical ventilation, surfactant administration, and steroids for bronchopulmonary dysplasia (BPD). Moreover, survival to hospital discharge increased (83.5 vs. 84.7%; p = 0.015); however, survival without BPD increased only among the most immature (230 to 266 weeks' GA) from 26.6 to 31.6% (p < 0.001). Enhanced adherence to international recommendations in perinatal care and a significant reduction in mortality were found during the second period. Survival without BPD increased only among the most immature. Further investigation is needed to optimize the strategies to prevent and manage respiratory disease in this group of patients. © 2017 S. Karger AG, Basel.

Atomic structure of nano voids in irradiated 3C-SiC

NASA Astrophysics Data System (ADS)

Lin, Yan-Ru; Chen, Liu-Gu; Hsieh, Cheng-Yo; Hu, Alice; Lo, Sheng-Chuan; Chen, Fu-Rong; Kai, Ji-Jung

2018-01-01

It is important to understand the atomic structure of defect clusters in SiC, a promising material for nuclear application. In this study, we have directly observed and identified nano voids in ion irradiated 3C-SiC at 800 °C, 20 dpa through ABF and HAADF STEM images. A quantitative method was used to analyze HAADF images in which atomic columns with a difference in the number of atoms could be identified and scattered intensities can be computed. Our result shows that these voids are composed of atomic vacancies in an octahedral arrangement. The density of the void was measured by STEM to be 9.2 × 1019m-3 and the size was ∼1.5 nm.

Evolution of deceased organ donation activity vs. efficiency over a 15 year period: an international comparison.

PubMed

Weiss, Julius; Elmer, Andreas; Mahíllo, Beatriz; Domínguez-Gil, Beatriz; Avsec, Danica; Costa, Alessandro Nanni; Haase-Kromwijk, Bernadette J J M; Laouabdia, Karim; Immer, Franz F

2018-04-19

The donation rate (DR) per million population is not ideal for an efficiency comparison of national deceased organ donation programs. The DR does not account for variabilities in the potential for deceased donation which mainly depends on fatalities from causes leading to brain death. In this study, the donation activity was put into relation to the mortality from selected causes. Based on that metric, this study assesses the efficiency of different donation programs. This is a retrospective analysis of 2001-2015 deceased organ donation and mortality registry data. Included are 27 Council of Europe countries, as well as the USA. A donor conversion index (DCI) was calculated for assessing donation program efficiency over time and in international comparisons. According to the DCI and of the countries included in the study, Spain, France, and the USA had the most efficient donation programs in 2015. Even though mortality from the selected causes decreased in most countries during the study period, differences in international comparisons persist. This indicates that the potential for deceased organ donation and its conversion into actual donation is far from being similar internationally. Compared with the DR, the DCI takes into account the potential for deceased organ donation, and therefore is a more accurate metric of performance. National donation programs could optimize performance by identifying the areas where most potential is lost, and by implementing measures to tackle these issues.

Commercial thinning in small-diameter aspen stands in northern Minnesota: study establishment report

Treesearch

Daniel W. Gilmore; Jennifer D. Glenn; Michael E. Ostry; John C. Zasada; Michael A. Benedict

2006-01-01

In the spring of 1999, a long-term study was established to examine the physical and biological aspects of thinning young aspen stands in Minnesota. Three aspen stands ranging in age from 25 to 35 years were selected on lands owned by the State of Minnesota and UPM Kymmene. Two thinning treatments (low and high density) and an unthinned control were installed at each...

[Angel Pulido Martín (1878-1970). 4th Chief of the Urology Service of the Provincial Hospital of Madrid].

PubMed

Sáiz Carrero, Ataúlfo

2003-05-01

To review the biography and scientific contributions of Dr. Angel Pulido Martin, fourth chairman of the Department of Urology at the Hospital Provincial of Madrid, and formerly at the Urology Clinic at the San Juan de Dios Hospital of Madrid. In addition, to show a panoramic view on how doctors who obtained scholarships to study outside Spain were trained in a specialty at the beginning of the 20th century. We reviewed memoirs books from Dr. Pulido Martin ("Medical letters", "Dr. Pulido and his time", and "Memoirs of a doctor"), his Ph.D. thesis and other works. We also reviewed biographic data obtained from his contemporaries in different publications. We report his experiences as a student in the specialities of Urology and Gynecology, since he first thought about taking this last one. Main european urologic and gynecologic centers of that time are represented, as well as some of the main characters in these specialties. We appreciate his great working spirit, which was inculcated into him by his father Dr. Pulido Fernandez, his enterprising desire, and the great professional he was, creating departments of urology which were school and model for many urologists of his time. A sincere clinician, Dr. Pulido Martin liked accuracy and daily self-improvement. He also was exceptional for his kindness treating patients and disciples. His publications on urologic topics were numerous; he also was fluent and entertaining as a non medical writer. He was an outstanding urologist in the early 20th century; he was member of the committee which elaborated the statutes of the Spanish Society of Urology, in which he was President for 11 years. He was also one of the founding members of the International Society of Urology and delegate of its Spanish chapter. He was official lecturer in several meetings, and also member of the Spanish Academy of Medicine and Surgery.

Modelling runoff depth and connectivity in commercial vineyards (DO Somontano, Huesca, NE Spain)

NASA Astrophysics Data System (ADS)

López-Vicente, Manuel, , Dr.; Navas, Ana, , Dr.

2015-04-01

Surface runoff, soil redistribution and sediment delivery are non-linear processes that depend on many parameters, and thus, numerical simulation of overland flow, sediments and other solutes connectivity is a complex and non-solved task. Additionally, man-made landscape linear elements (LLEs: unpaved and paved trails, roads, land levelling, irrigation ditches, stone walls, dams, etc.) modify the natural patterns of connectivity. Mediterranean soils have been cultivated for hundreds and thousands of years and landscapes appear intensively modified. Vineyards are one of the most ancient crops in Mediterranean countries and recently in other countries around the World. In this study, we run the IC model of connectivity (Borselli et al., 2008, doi:10.1016/j.catena.2008.07.006) and the water balance DR2-2013© SAGA v1.1 model (López-Vicente et al., 2014, doi:10.1016/j.envsoft.2014.08.025; software freely downloaded at http://digital.csic.es/handle/10261/93543) in a vineyard (26.4 ha) composed by four fields (6.2 ha) and their upslope drainage area. These commercial fields belong to a winery included in the Somontano certificate of origin. All input maps are generated at 5 x 5 m of cell size and the digital elevation model is based on LIDAR technology. The map of connectivity showed the typical spatial pattern of overland flow though values of connectivity varied along the whole map. The average value was -2.65 (sd = -0.62) and within the four vineyards was -2.46 (sd = -0.65). High connectivity appeared in bare soil areas, in the unpaved trail and within some sections of the main pathways. The lowest connectivity appeared in the forest and in small areas within the vineyards. The effective rainfall (ER) that reaches the soils, was 88% on average (384 mm) from the total rainfall depth (436 mm yr-1) and the average initial runoff, before overland flow processes, was 382 mm yr-1 (sd = 31 mm). The ER within the vineyards was 81%. The effective runoff (CQeff) ranged from 0.5 until 985.5 mm yr-1 with an average value of 51.4 mm and 52.4 mm within the vineyards. The corresponding map showed numerous disruptions along the hillslope due to the presence of LLEs and topographic changes. The total depth of annual runoff corresponds to only 28.3% of the total effective rainfall (TER) and 24.9% of the total rainfall depth (TR). Within the vineyards these percentages were of 21.6 and 17.5%. The remaining water associated with the runoff and rainfall events (Waa) meant 71.7% and 63.2% of the TER and TR, respectively, and 78.4 and 63.2% within the vineyards. The average values of Waa were 130 and 189 mm for the whole study area and within the vineyards. The map of the Waa presented a different spatial pattern where the land uses play a more important role than the processes of cumulative overland flow. The highest values of CQeff appeared in April, September, October and November. The joint analysis of the results and the correlation between the predicted values with the IC and DR2 models adds valuable information about the processes of surface water dynamics in hillslopes with cultivated and forested soils.

Formation of crystalline heteroepitaxial SiC films on Si by carbonization of polyimide Langmuir-Blodgett films

NASA Astrophysics Data System (ADS)

Luchinin, Viktor V.; Goloudina, Svetlana I.; Pasyuta, Vyacheslav M.; Panov, Mikhail F.; Smirnov, Alexander N.; Kirilenko, Demid A.; Semenova, Tatyana F.; Sklizkova, Valentina P.; Gofman, Iosif V.; Svetlichnyi, Valentin M.; Kudryavtsev, Vladislav V.

2017-06-01

High-quality crystalline nano-thin SiC films on Si substrates were prepared by carbonization of polyimide (PI) Langmuir-Blodgett (LB) films. The obtained films were characterized by Fourier transform-infrared (FTIR) spectroscopy, X-ray diffraction (XRD) analysis, Raman spectroscopy, transmission electon microscopy (TEM), transmission electron diffraction (TED), and scanning electron microscopy (SEM). We demonstrated that the carbonization of a PI film on a Si substrate at 1000 °C leads to the formation of a carbon film and SiC nanocrystals on the Si substrate. It was found that five planes in the 3C-SiC(111) film are aligned with four Si(111) planes. As a result of repeated annealing of PI films containing 121 layers at 1200 °C crystalline SiC films were formed on the Si substrate. It was shown that the SiC films (35 nm) grown on Si(111) at 1200 °C have a mainly cubic 3C-SiC structure with small amount of hexagonal polytypes. Only 3C-SiC films (30 nm) were formed on the Si(100) substrate at the same temperature. It was shown that the SiC films (30-35 nm) can cover the voids with size up to 10 µm in the Si substrate. The current-voltage (I-V) characteristics of the n-Si/n-SiC heterostructure were obtained by conductive atomic force microscopy.

A Model for the Oxidation of C/SiC Composite Structures

NASA Technical Reports Server (NTRS)

Sullivan, Roy M.

2003-01-01

A mathematical theory and an accompanying numerical scheme have been developed for predicting the oxidation behavior of C/SiC composite structures. The theory is derived from the mechanics of the flow of ideal gases through a porous solid. Within the mathematical formulation, two diffusion mechanisms are possible: (1) the relative diffusion of one species with respect to the mixture, which is concentration gradient driven and (2) the diffusion associated with the average velocity of the gas mixture, which is total gas pressure gradient driven. The result of the theoretical formulation is a set of two coupled nonlinear differential equations written in terms of the oxidant and oxide partial pressures. The differential equations must be solved simultaneously to obtain the partial vapor pressures of the oxidant and oxides as a function of space and time. The local rate of carbon oxidation is determined as a function of space and time using the map of the local oxidant partial vapor pressure along with the Arrhenius rate equation. The nonlinear differential equations are cast into matrix equations by applying the Bubnov-Galerkin weighted residual method, allowing for the solution of the differential equations numerically. The end result is a numerical scheme capable of determining the variation of the local carbon oxidation rates as a function of space and time for any arbitrary C/SiC composite structures.

Oxidation of C/SiC Composites at Reduced Oxygen Partial Pressures

NASA Technical Reports Server (NTRS)

Opila, E. J.; Serra, J. L.

2007-01-01

T-300 carbon fibers and T-300 carbon fiber reinforced silicon carbide composites (C/SiC) were oxidized in flowing reduced oxygen partial pressure environments at a total pressure of one atmosphere (0.5 atm O2, 0.05 atm O2 and 0.005 atm O2, balance argon). Experiments were conducted at four temperatures (816deg, 1149deg, 1343deg, and 1538 C). The oxidation kinetics were monitored using thermogravimetric analysis. T-300 fibers were oxidized to completion for times between 0.6 and 90 h. Results indicated that fiber oxidation kinetics were gas phase diffusion controlled. Oxidation rates had an oxygen partial pressure dependence with a power law exponent close to one. In addition, oxidation rates were only weakly dependent on temperature. The C/SiC coupon oxidation kinetics showed some variability, attributed to differences in the number and width of cracks in the SiC seal coat. In general, weight losses were observed indicating oxidation of the carbon fibers dominated the oxidation behavior. Low temperatures and high oxygen pressures resulted in the most rapid consumption of the carbon fibers. At higher temperatures, the lower oxidation rates were primarily attributed to crack closure due to SiC thermal expansion, rather than oxidation of SiC since these reduced rates were observed even at the lowest oxygen partial pressures where SiC oxidation is minimal.

Spanish Network on Effects of Wildfires on Soils. The view after 5 years of networking

NASA Astrophysics Data System (ADS)

Jordán, Antonio; Mataix-Solera, Jorge; Cerdà, Artemi

2013-04-01

1. WHAT IS FUEGORED? The Spanish Thematic Network "Effects of Wildfires on Soils" (FUEGORED, http://grupo.us.es/fuegored) has been working for over 5 years at becoming a point of reference for the study of fire-affected soils and restoration strategies. FUEGORED started in 2007, originally scheduled to run three years, as a result of the interest of Spanish researchers for developing better strategies and scientific interchange of ideas, people and collaboration between research groups. The first steps towards the establishment of a working group were a series of fieldtrips through Spain (2003), USA (2004) and Portugal (2005), where discussions about problems and research strategies arised. In its early years the network was supported by the former Ministry of Science and Innovation. This is a project to review scientific knowledge developed to date and discuss and propose future developments in scientific research about the effects of wildfires on soils. The objectives of the network are to promote and disseminate scientific research findings, provide technical and management information, and facilitate transference of knowledge between scientists, forest managers, students and society. 2. WHO IS IN THE NETWORK? The research group consists of the leading names of Spanish science in the topic and young talents, which are currently developing the most innovative research lines. Currently, the network is formed by 245 members, researchers from over 30 Spanish universities and research centers to provide the experience of decades of scientific and technical work in areas affected by forest fires and outstanding foreign researchers from Europe, Australia and America, including countries such as Australia, Italy, Lithuania, Portugal, UK, USA and others. Forest managers and technicians from various institutions are also present. 3. MAIN ACHIEVEMENTS Four international congresses have been promoted by the network in Valencia, 2008, Seville, 2009, Santiago de Compostela, 2010 and Tenerife, 2012 (the next meeting will be held in Barcelona in 2014). In addition, several contributions, courses and workshops have been celebrated in Spanish or international forums as the EGU General Assembly, the International Meeting of Fire Effects on Soil Properties (FESP2011 and forthcoming FESP2013) and the International Conference on Geomorphology have been also sponsored. Other activities include the publication of book series (two volumes have been published: Cerdá and Jordán, 2010; Cerdà and Mataix-Solera, 2009. The third one is currently in preparation), books of abstracts (Díaz-Raviña et al., 2010; Jordán et al., 2009), a series of technical reports (in preparation) and special issues in international journals (in, for example, Catena, Geoderma, Environmental Research or the International Journal of Wildland Fire). A four-monthly journal (FLAMMA; http://grupo.us.es/fuegored/flamma) is published regularly since 2010 with an increasing audience and issues scheduled until 2014. Also, the network has promoted voluntary environmental actions and educational activities. 4. MAIN CHALLENGES The next challenges are to continue promoting the interaction between scientists, decision makers, forest management staff and end-users and to establish new connections with European institutions and research groups. ACKNOWLEDGEMENTS The Spanish Thematic Network "Effects of Wildfires on Soils" was supported between 2007 and 2009 by the Spanish Ministry of Science and Innovation (projects CGL2007-28764-E 2007-2008 and CGL2008-01632-E 2009). REFERENCES Cerdà, A. Jordán, A. (Eds.). 2010. Actualización de Métodos y Técnicas para el Estudio de los Suelos Afectados por Incendios Forestales [Updated methods and techniques for the study of soils affected by wildfires; in Spanish]. Cátedra de Divulgació de la Ciència, Universitat de València, FUEGORED 2010. Valencia. 521 pp. ISBN: 978-84-370-7887-8. Cerdà, A., Mataix-Solera, J. (Eds). 2009. Efectos de los incendios forestales sobre los suelos en España. El estado de la cuestión visto por los científicos españoles [Effects of wildfires on soils in Spain. The state of the question as seen by Spanish scientists; in Spanish]. Càtedra de Divulgació de la Ciència. Universitat de Valencia. 529 pp. ISBN: 978-84-370-7653-9. Díaz Raviña, M., Benito, E., Carballas, T., Fontúrbel, M.T., Vega , J.A.(Eds.). 2010. Research and post-fire Management: Soil Protection and Rehabilitation Techniques for Burnt Forest Ecosystems. IIAG (CSIC). Santiago de Compostela. 326 pp. ISBN: 978-84-8408-583-6. Jordán, A., Zavala, L.M. de la Rosa, J.M., Knicker, H., González-Pérez, J.A., González-Vila, F.J. (Eds.). 2009. Advances in forest fire effects on soils 2009. IRNAS-CSIC-Universidad de Sevilla. Sevilla. 144 pp. URI: http://hdl.handle.net/10261/18162. FUEGORED INTERNATIONAL MEETINGS FUEGORED2008. I International Meeting Effects of Wildfires son Soils. 03-05 December 2008. Valencia/Enguera/Alcoi, Spain. FUEGORED2009. II International Meeting Effects of Wildfires son Soils. 04-06 November 2009. Sevilla/Cortegana, Spain. FUEGORED2010. III International Meeting Effects of Wildfires son Soils Research and post-fire Management: Soil Protection and Rehabilitation Techniques for Burnt Forest Ecosystems 06-08 October 2010. Santiago de Compostela, Spain. FUEGORED2012. IV International Meeting Effects of Wildfires son Soils 24-27 October 2012. Puerto de la Cruz, Spain.

SIRENA software for Athena X-IFU event reconstruction

NASA Astrophysics Data System (ADS)

Ceballos, M. T.; Cobo, B.; Peille, P.; Wilms, J.; Brand, T.; Dauser, T.; Bandler, S.; Smith, S.

2017-03-01

The X-ray Observatory Athena was proposed in April 2014 as the mission to implement the science theme "The Hot and Energetic Universe" selected by ESA for L2 (the second Large-class mission in ESA’s Cosmic Vision science programme). One of the two X-ray detectors designed to be onboard Athena is X-IFU, a cryogenic microcalorimeter based on Transition Edge Sensor (TES) technology that will provide spatially resolved high-resolution spectroscopy. X-IFU will be developed by an international consortium led by IRAP (PI), SRON (co-PI) and IAPS/INAF (co-PI) and involving ESA Member States, Japan and the United States. In Spain, IFCA (CSIC-UC) has an anticipated contribution to X-IFU through the Digital Readout Electronics (DRE) unit, in particular in the Event Processor Subsystem. For this purpose and in collaboration with the Athena end-to-end simulations team, we are currently developing the SIRENA package as part of the publicly available SIXTE end-to-end simulator. SIRENA comprises a set of processing algorithms aimed at recognizing, from a noisy signal, the intensity pulses generated by the absorption of the X-ray photons, to lately reconstruct their energy, position and arrival time. This poster describes the structure of the package and the different algorithms currently implemented as well as their comparative performance in the energy resolution achieved in the reconstruction of the instrument events.

First description of gastrointestinal nematodes of Barbary sheep (Ammotragus lervia): the case of Camelostrongylus mentulatus as a paradigm of phylogenic and specific relationship between the parasite and its ancient host.

PubMed

Mayo, E; Ortiz, J; Martínez-Carrasco, C; Garijo, M M; Espeso, G; Hervías, S; Ruiz de Ybáñez, M R

2013-09-01

The gastrointestinal helminth fauna of 24 Barbary sheep or Aoudad (Ammotragus lervia sahariensis) maintained in the Parque de Rescate de la Fauna Sahariana (PRFS, CSIC, Almeria, Spain) was analyzed. Most animals (87.5 %) were parasitized, and multiple infections were highly present. The following species were identified: Camelostrongylus mentulatus, Teladorsagia circumcincta, Marshallagia marshalli, Ostertagia ostertagi, O. leptospicularis, O. lyrata, Haemonchus contortus, Teladorsagia trifurcata, Trichostrongylus vitrinus, T. colubriformis, T. probolorus, T. capricola, Nematodirus spathiger, N. abnormalis, N. filicollis, N. helvetianus, Trichuris spp. and Skrjabinema ovis. Teladorsagia circumcincta was the most prevalent nematode in abomasum (52.6 %) followed by C. mentulatus (50 %). However, this latter nematode had the greater mean intensity and abundance. In the small intestine, T. colubriformis and T. vitrinus had the highest prevalence (36.4 %); the last one showed also the greater mean intensity and abundance. It should be emphasized the presence of Skrjabinema ovis (prevalence 39.1 %) in the large intestine, showing the greater mean abundance and intensity, although with a low values. Camelostrongylus mentulatus could be the most primitive nematode of the family trichostrongylidae recovered in this study; attending to its high prevalence, mean abundance and mean intensity, the possible specificity between this parasite and the Aoudad is discussed.

Integrated Thermal Protection Systems and Heat Resistant Structures

NASA Technical Reports Server (NTRS)

Pichon, Thierry; Lacoste, Marc; Glass, David E.

2006-01-01

In the early stages of NASA's Exploration Initiative, Snecma Propulsion Solide was funded under the Exploration Systems Research & Technology program to develop integrated thermal protection systems and heat resistant structures for reentry vehicles. Due to changes within NASA's Exploration Initiative, this task was cancelled early. This presentation provides an overview of the work that was accomplished prior to cancellation. The Snecma team chose an Apollo-type capsule as the reference vehicle for the work. They began with the design of a ceramic aft heatshield (CAS) utilizing C/SiC panels as the capsule heatshield, a C/SiC deployable decelerator and several ablators. They additionally developed a health monitoring system, high temperature structures testing, and the insulation characterization. Though the task was pre-maturely cancelled, a significant quantity of work was accomplished.

PREFACE: 16th European White Dwarfs Workshop

NASA Astrophysics Data System (ADS)

Garcia-Berro, Enrique; Hernanz, Margarita; Isern, Jordi; Torres, Santiago

2009-07-01

The 16th European Workshop on White Dwarfs was held in Barcelona, Spain, from 30 June to 4 July 2008 at the premises of the UPC. Almost 120 participants from Europe (France, Germany, United Kingdom, Italy, and several others), America (USA, Canada, Argentina, Brazil, and Chile), and other continents (Australia, South Africa, . . . ) attended the workshop. Among these participants were the most relevant specialists in the field. The topics covered by the conference were: White dwarf structure and evolution Progenitors and Planetary Nebulae White dwarfs in binaries: cataclysmic variables, double degenerates and other binaries White dwarfs, dust disks and planetary systems Atmospheres, chemical composition, magnetic fields Variable white dwarfs White dwarfs in stellar clusters and the halo White Dwarfs as SNIa progenitors The programme included 54 talks, and 45 posters. The oral presentations were distributed into the following sessions: Luminosity function, mass function and populations White dwarf structure and evolution White dwarf ages White dwarf catalogs and surveys Central stars of planetary nebulae Supernovae progenitors White dwarfs in novae and CVs Physical processes in white dwarfs and magnetic white dwarfs Disks, dust and planets around white dwarfs Pulsating white dwarfs Additionally we had a special open session about Spitzer and white dwarfs. The Proceedings of the 16th European Workshop on White Dwarfs are representative of the current state-of-the-art of the research field and include new and exciting results. We acknowledge the very positive attitude of the attendants to the workshop, which stimulated very fruitful discussions that took place in all the sessions and after the official schedule. Also, the meeting allowed new collaborations tp start that will undoubtedly result in significant advances in the research field. We also acknowledge the willingness of the participants to deliver their contributions before the final deadline. We sincerely thank them. The white dwarf community has been steadily growing since the first white dwarf workshop, held in Kiel (Germany) in 1974. Some of the participants in the first colloquium have already effectively retired; others - although officially retired - continue to attend successive workshops, Professor Weidemann, one of the first organizers, being a leading example. We hope we will be able to continue counting on them for many years. A very graphical view of the evolution of the field can be found in the homepage of Professor Detlev Koester, who has collected pictures of almost all the previous workshops:. Additionally, several astronomers coming from related fields have joined our (not so) small community. Most importantly, several generations of young scientists gave their first talks in these workshops. In summary our community is an active one, and we have close, durable and solid ties of friendship. We are optimistic and we foresee that the spirit of the previous workshops will continue in future editions. We would like to express our deepest gratitude to our sponsors: The Universitat Politècnica de Catalunya (UPC), the Institut de Ciències de l'Espai (CSIC), the Institute for Space Studies of Catalonia (IEEC), the Spanish Ministry of Education and Science, the Generalitat de Catalunya, the Ajuntament de Barcelona, the School of Civil Engineering of Barcelona and UPCnet. Finally, the IEEC staff and our graduate students have enthusiastically supported the organization of the workshop in every single detail; without them we would have not succeeded. We thank them especially. Also, we acknowledge the task of the Scientific Organizing Committee, which gave their full support in all the scientific tasks. Enrique García-Berro, UPC Margarida Hernanz, ICE (CSIC) Jordi Isern, ICE (CSIC) Santiago Torres, UPC Editors Conference photograph

An in-depth study of HD 174966 with CoRoT photometry and HARPS spectroscopy. Large separation as a new observable for δ Scuti stars

NASA Astrophysics Data System (ADS)

García Hernández, A.; Moya, A.; Michel, E.; Suárez, J. C.; Poretti, E.; Martín-Ruíz, S.; Amado, P. J.; Garrido, R.; Rodríguez, E.; Rainer, M.; Uytterhoeven, K.; Rodrigo, C.; Solano, E.; Rodón, J. R.; Mathias, P.; Rolland, A.; Auvergne, M.; Baglin, A.; Baudin, F.; Catala, C.; Samadi, R.

2013-11-01

Aims: The aim of this work was to use a multi-approach technique to derive the most accurate values possible of the physical parameters of the δ Sct star HD 174966, which was observed with the CoRoT satellite. In addition, we searched for a periodic pattern in the frequency spectra with the goal of using it to determine the mean density of the star. Methods: First, we extracted the frequency content from the CoRoT light curve. Then, we derived the physical parameters of HD 174966 and carried a mode identification out from the spectroscopic and photometric observations. We used this information to look for the models fulfilling all the conditions and discussed the inaccuracies of the method because of the rotation effects. In a final step, we searched for patterns in the frequency set using a Fourier transform, discussed its origin, and studied the possibility of using the periodicity to obtain information about the physical parameters of the star. Results: A total of 185 peaks were obtained from the Fourier analysis of the CoRoT light curve, all of which were reliable pulsating frequencies. From the spectroscopic observations, 18 oscillation modes were detected and identified, and the inclination angle (62.5°-17.5+7.5) and the rotational velocity of the star (142 km s-1) were estimated. From the multi-colour photometric observations, only three frequencies were detected that correspond to the main ones in the CoRoT light curve. We looked for periodicities within the 185 frequencies and found a quasiperiodic pattern Δν ~ 64 μHz. Using the inclination angle, the rotational velocity, and an Echelle diagram (showing a double comb outside the asymptotic regime), we concluded that the periodicity corresponds to a large separation structure. The quasiperiodic pattern allowed us to discriminate models from a grid. As a result, the value of the mean density is achieved with a 6% uncertainty. So, the Δν pattern could be used as a new observable for A-F type stars. The CoRoT space mission was developed and is operated by the French space agency CNES, with participation of ESA's RSSD and Science Programmes, Austria, Belgium, Brazil, Germany, and Spain.This work is based on ground-based observations made with the ESO 3.6 m telescope at La Silla Observatory under the ESO Large Programme LP182.D-0356, and on observations collected at the Centro Astronómico Hispano Alemán (CAHA) at Calar Alto, operated jointly by the Max-Planck-Institut für Astronomie and the Instituto de Astrofísica de Andalucía (CSIC), and on observations made at Observatoire de Haute Provence (CNRS), France, and at Observatorio de Sierra Nevada (OSN), Spain, operated by the Instituto de Astrofísica de Andalucía (CSIC). This research has made use of both the Simbad database, operated at CDS, Strasbourg, France, and the Astrophysics Data System, provided by NASA, USA.Table 6 is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/559/A63

A model for assessing habitat fragmentation caused by new infrastructures in extensive territories - evaluation of the impact of the Spanish strategic infrastructure and transport plan.

PubMed

Mancebo Quintana, S; Martín Ramos, B; Casermeiro Martínez, M A; Otero Pastor, I

2010-05-01

The aim of the present work is to design a model for evaluating the impact of planned infrastructures on species survival at the territorial scale by calculating a connectivity index. The method developed involves determining the effective distance of displacement between patches of the same habitat, simplifying earlier models so that there is no dependence on specific variables for each species. A case study is presented in which the model was used to assess the impact of the forthcoming roads and railways included in the Spanish Strategic Infrastructure and Transport Plan (PEIT, in its Spanish initials). This study took into account the habitats of peninsular Spain, which occupies an area of some 500,000 km(2). In this territory, the areas deemed to provide natural habitats are defined by Directive 92/43/EEC. The impact of new infrastructures on connectivity was assessed by comparing two scenarios, with and without the plan, for the major new road and railway networks. The calculation of the connectivity index (CI) requires the use of a raster methodology based on the Arc/Info geographical information system (GIS). The actual calculation was performed using a program written in Arc/Info Macro Language (AML); this program is available in FragtULs (Mancebo Quintana, 2007), a set of tools for calculating indicators of fragmentation caused by transport infrastructure (http://topografia.montes.upm.es/fragtuls.html). The indicator of connectivity proposed allows the estimation of the connectivity between all the patches of a territory, with no artificial (non-ecologically based) boundaries imposed. The model proposed appears to be a useful tool for the analysis of fragmentation caused by plans for large territories. Copyright 2009 Elsevier Ltd. All rights reserved.

Sensor-based monitoring and inspection of surface morphology in ultraprecision manufacturing processes

NASA Astrophysics Data System (ADS)

Rao, Prahalad Krishna

This research proposes approaches for monitoring and inspection of surface morphology with respect to two ultraprecision/nanomanufacturing processes, namely, ultraprecision machining (UPM) and chemical mechanical planarization (CMP). The methods illustrated in this dissertation are motivated from the compelling need for in situ process monitoring in nanomanufacturing and invoke concepts from diverse scientific backgrounds, such as artificial neural networks, Bayesian learning, and algebraic graph theory. From an engineering perspective, this work has the following contributions: 1. A combined neural network and Bayesian learning approach for early detection of UPM process anomalies by integrating data from multiple heterogeneous in situ sensors (force, vibration, and acoustic emission) is developed. The approach captures process drifts in UPM of aluminum 6061 discs within 15 milliseconds of their inception and is therefore valuable for minimizing yield losses. 2. CMP process dynamics are mathematically represented using a deterministic multi-scale hierarchical nonlinear differential equation model. This process-machine inter-action (PMI) model is evocative of the various physio-mechanical aspects in CMP and closely emulates experimentally acquired vibration signal patterns, including complex nonlinear dynamics manifest in the process. By combining the PMI model predictions with features gathered from wirelessly acquired CMP vibration signal patterns, CMP process anomalies, such as pad wear, and drifts in polishing were identified in their nascent stage with high fidelity (R2 ~ 75%). 3. An algebraic graph theoretic approach for quantifying nano-surface morphology from optical micrograph images is developed. The approach enables a parsimonious representation of the topological relationships between heterogeneous nano-surface fea-tures, which are enshrined in graph theoretic entities, namely, the similarity, degree, and Laplacian matrices. Topological invariant measures (e.g., Fiedler number, Kirchoff index) extracted from these matrices are shown to be sensitive to evolving nano-surface morphology. For instance, we observed that prominent nanoscale morphological changes on CMP processed Cu wafers, although discernible visually, could not be tractably quantified using statistical metrology parameters, such as arithmetic average roughness (Sa), root mean square roughness (Sq), etc. In contrast, CMP induced nanoscale surface variations were captured on invoking graph theoretic topological invariants. Consequently, the graph theoretic approach can enable timely, non-contact, and in situ metrology of semiconductor wafers by obviating the need for reticent profile mapping techniques (e.g., AFM, SEM, etc.), and thereby prevent the propagation of yield losses over long production runs.

Seismic Study of the Solar Interior: Inferences from SOI/MDI Observations During Solar Activity

NASA Technical Reports Server (NTRS)

Korzennik, Sylvain G.; Wagner, William J. (Technical Monitor)

2001-01-01

We have continued in collaboration with Dr. Eff-Darwich (University of La Laguna, Tenerife, Spain) the study of the structure, asphericity and dynamics of the solar interior from p-mode frequencies and frequency splittings. In March 2001, Dr. Eff-Darwich came for 3 weeks visit to CfA. During this visit we completed our work on the inversion of the internal solar rotation rate, and submitted a paper describing this work to the Astrophysical Journal. This paper has been recently revised in response to the referee comments and I expect that it will be accepted for publication very soon. We also have analyzed helioseismic data looking for temporal variations of the solar stratification near the base of the convection zone. We have expanded on the initial work that was presented at the SOHO-10/GONG-2000 meeting (October 2000, Tenerife), and are in the process of writing this up. Substantial progress towards the characterization of high-degree p-modes has been achieved. Indeed, in collaboration Dr. Rabello-Soares (Stanford University), we have gained a clear conceptual understanding of the various elements that affect the leakage matrix of the SOI/MDI instrument. This was presented in an invited talk at the SOHO-10/GONG-2000 meeting (October 2000, Tenerife). Once we will have successfully migrated from a qualitative to a quantitative assessment of these effects, we should be able to generate high-degree p-modes frequencies so crucial in the diagnostic of the layers just below solar surface.

Steady-state analytical model of suspended p-type 3C-SiC bridges under consideration of Joule heating

NASA Astrophysics Data System (ADS)

Balakrishnan, Vivekananthan; Dinh, Toan; Phan, Hoang-Phuong; Kozeki, Takahiro; Namazu, Takahiro; Viet Dao, Dzung; Nguyen, Nam-Trung

2017-07-01

This paper reports an analytical model and its validation for a released microscale heater made of 3C-SiC thin films. A model for the equivalent electrical and thermal parameters was developed for the two-layer multi-segment heat and electric conduction. The model is based on a 1D energy equation, which considers the temperature-dependent resistivity and allows for the prediction of voltage-current and power-current characteristics of the microheater. The steady-state analytical model was validated by experimental characterization. The results, in particular the nonlinearity caused by temperature dependency, are in good agreement. The low power consumption of the order of 0.18 mW at approximately 310 K indicates the potential use of the structure as thermal sensors in portable applications.

Effects of collision cascade density on radiation defect dynamics in 3C-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bayu Aji, L. B.; Wallace, J. B.; Kucheyev, S. O.

Effects of the collision cascade density on radiation damage in SiC remain poorly understood. We study damage buildup and defect interaction dynamics in 3C-SiC bombarded at 100 °C with either continuous or pulsed beams of 500 keV Ne, Ar, Kr, or Xe ions. Here, we find that bombardment with heavier ions, which create denser collision cascades, results in a decrease in the dynamic annealing efficiency and an increase in both the amorphization cross-section constant and the time constant of dynamic annealing. The cascade density behavior of these parameters is non-linear and appears to be uncorrelated. Our results demonstrate clearly (andmore » quantitatively) an important role of the collision cascade density in dynamic radiation defect processes in 3C-SiC.« less

Controlled growth of 3C-SiC and 6H-SiC films on low-tilt-angle vicinal (0001) 6H-SiC wafers

NASA Technical Reports Server (NTRS)

Powell, J. A.; Petit, J. B.; Edgar, J. H.; Jenkins, I. G.; Matus, L. G.

1991-01-01

It has been found that, with proper pregrowth surface treatment, 6H-SiC single-crystal films can be grown by chemical vapor deposition (CVD) at 1450 C on vicinal (0001) 6H-SiC with tilt angles as small as 0.1 deg. Previously, tilt angles of greater than 1.5 deg were required to achieve 6H on 6H at this growth temperature. In addition, 3C-SiC could be induced to grow within selected regions on the 6H substrate. the 3C regions contained few (or zero) double-positioning boundaries and a low density of stacking faults. A new growth model is proposed to explain the control of SiC polytype in this epitaxial film growth process.

Effects of collision cascade density on radiation defect dynamics in 3C-SiC

DOE PAGES

Bayu Aji, L. B.; Wallace, J. B.; Kucheyev, S. O.

2017-03-17

Effects of the collision cascade density on radiation damage in SiC remain poorly understood. We study damage buildup and defect interaction dynamics in 3C-SiC bombarded at 100 °C with either continuous or pulsed beams of 500 keV Ne, Ar, Kr, or Xe ions. Here, we find that bombardment with heavier ions, which create denser collision cascades, results in a decrease in the dynamic annealing efficiency and an increase in both the amorphization cross-section constant and the time constant of dynamic annealing. The cascade density behavior of these parameters is non-linear and appears to be uncorrelated. Our results demonstrate clearly (andmore » quantitatively) an important role of the collision cascade density in dynamic radiation defect processes in 3C-SiC.« less

SAW propagation characteristics of TeO3/3C-SiC/LiNbO3 layered structure

NASA Astrophysics Data System (ADS)

Soni, Namrata D.

2018-04-01

Surface acoustic wave (SAW) devices based on Lithium Niobate (LiNbO3) single crystal are advantageous because of its high SAW phase velocity, electromechanical coupling coefficient and cost effectiveness. In the present work a new multi-layered TeO3/3C-SiC/128° Y-X LiNbO3 SAW device has been proposed. SAW propagation properties such as phase velocity, coupling coefficient and temperature coefficient of delay (TCD) of the TeO3/SiC/128° Y-X LiNbO3 multi layered structure is examined using theoretical calculations. It is found that the integration of 0.09λ thick 3C-SiC over layer on 128° Y-X LiNbO3 increases its electromechanical coupling coefficient from 5.3% to 9.77% and SAW velocity from 3800 ms‑1 to 4394 ms‑1. The SiC/128° Y-X LiNbO3 bilayer SAW structure exhibits a high positive TCD value. A temperature stable layered SAW device could be obtained with introduction of 0.007λ TeO3 over layer on SiC/128° Y-X LiNbO3 bilayer structure without sacrificing the efficiency of the device. The proposed TeO3/3C-SiC/128° Y-X LiNbO3 multi-layered SAW structure is found to be cost effective, efficient, temperature stable and suitable for high frequency application in harsh environment.

Molecular dynamics modeling of atomic displacement cascades in 3C-SiC: Comparison of interatomic potentials

NASA Astrophysics Data System (ADS)

Samolyuk, G. D.; Osetsky, Y. N.; Stoller, R. E.

2015-10-01

We used molecular dynamics modeling of atomic displacement cascades to characterize the nature of primary radiation damage in 3C-SiC. We demonstrated that the most commonly used interatomic potentials are inconsistent with ab initio calculations of defect energetics. Both the Tersoff potential used in this work and a modified embedded-atom method potential reveal a barrier to recombination of the carbon interstitial and carbon vacancy which is much higher than the density functional theory (DFT) results. The barrier obtained with a newer potential by Gao and Weber is closer to the DFT result. This difference results in significant differences in the cascade production of point defects. We have completed both 10 keV and 50 keV cascade simulations in 3C-SiC at a range of temperatures. In contrast to the Tersoff potential, the Gao-Weber potential produces almost twice as many C vacancies and interstitials at the time of maximum disorder (∼0.2 ps) but only about 25% more stable defects at the end of the simulation. Only about 20% of the carbon defects produced with the Tersoff potential recombine during the in-cascade annealing phase, while about 60% recombine with the Gao-Weber potential. The Gao-Weber potential appears to give a more realistic description of cascade dynamics in SiC, but still has some shortcomings when the defect migration barriers are compared to the ab initio results.

Advances in Ceramic Matrix Composite Blade Damping Characteristics for Aerospace Turbomachinery Applications

NASA Technical Reports Server (NTRS)

Min, James B.; Harris, Donald L.; Ting, J. M.

2011-01-01

For advanced aerospace propulsion systems, development of ceramic matrix composite integrally-bladed turbine disk technology is attractive for a number of reasons. The high strength-to-weight ratio of ceramic composites helps to reduce engine weight and the one-piece construction of a blisk will result in fewer parts count, which should translate into reduced operational costs. One shortcoming with blisk construction, however, is that blisks may be prone to high cycle fatigue due to their structural response to high vibration environments. Use of ceramic composites is expected to provide some internal damping to reduce the vibratory stresses encountered due to unsteady flow loads through the bladed turbine regions. A goal of our research was to characterize the vibration viscous damping behavior of C/SiC composites. The vibration damping properties were measured and calculated. Damping appeared to decrease with an increase in the natural frequency. While the critical damping amount of approximately 2% is required for typical aerospace turbomachinery engines, the C/SiC damping at high frequencies was less than 0.2% from our study. The advanced high-performance aerospace propulsion systems almost certainly will require even more damping than what current vehicles require. A purpose of this paper is to review some work on C/SiC vibration damping by the authors for the NASA CMC turbine blisk development program and address an importance of the further investigation of the blade vibration damping characteristics on candidate CMC materials for the NASA s advanced aerospace turbomachinery engine systems.

The future in Agricultural Engineering: news degrees in the Universidad Politécnica de Madrid (UPM)

NASA Astrophysics Data System (ADS)

Cartagena, M. Carmen; Tarquis, A. M.; Vázquez, J.; Serrano, A.; Arce, A.

2010-05-01

The Bologna process is to improve the quality of education, mobility, diversity and the competitiveness and involves three fundamental changes: transform of the structure of titles, changing in methods of teaching and implementation of the systems of quality assurance. Engineer Agronomist at the Universidad Politécnica de Madrid (UPM) has been offered as a degree of five years with a total of 400 credits and seven optional orientations: Crop Production, Plant and Breeding Protection, Environment, Agricultural Economics, Animal Production, Rural Engineering and Food Technology. Actually, the Bologna plan creates three new degrees: Engineering and Science Agronomic, Food Engineering and Agro-Environmental Engineering, with 240 ECTS each one of them and with specific professional characteristics. The changes that involve the introduction of these new degrees is perhaps the largest occurred never at the Spanish university system, not only by the drastic transformation in the structure of titles, but also by the new changes that lie ahead in teaching methods. Among others we will comment the following ones: -A year decreased duration of studies and therefore incorporation into the market. - Elimination of the seven current guidelines to create three specific qualifications of degree. -Decrease of optional subjects and increase in credits for the basic subjects. - Inclusion of business practices. - Increase in the number of credits of final project. - Changes in methodologies and a higher involvement of teachers and students in the education.

The Latin American population in Spain and organ donation. Attitude toward deceased organ donation and organ donation rates.

PubMed

Ríos, Antonio; López-Navas, Ana I; Navalón, Juan C; Martínez-Alarcón, Laura; Ayala-García, Marco A; Sebastián-Ruiz, María J; Moya-Faz, Francisco; Garrido, Gregorio; Ramirez, Pablo; Parrilla, Pascual

2015-04-01

The Latin American (LA) population has similarities with the Spanish population which makes its integration into Spanish society easier. to analyze the attitude toward organ donation among Latin American citizens residing in Spain, to determine the psychosocial variables which affect this attitude, and to examine the correlation between donation rates of LA citizens in Spain and in their countries of origin. A random sample of LA residents in Spain was taken and stratified according to the respondent's nationality (n = 1.314), in the year 2010. Attitude was assessed using a validated questionnaire (PCID-DTO Dr Rios). The survey was self-administered and completed anonymously. Student's t-test, the χ(2) test, and logistic regression analysis. There was a 94% completion rate (n = 1.237). Attitude toward donation was favorable in 60% of cases (n = 745), 12% (n = 145) were against, and 28% (n = 347) were undecided. The following variables were associated with attitude toward donation: sex (P = 0.038), level of formal education (P < 0.001), country of origin (P = 0.002), attitude toward the donation of a family member's organs (P < 0.001), having discussed donation with the family (P < 0.001), carrying out prosocial activities (P = 0.025), attitude toward cremation of the body (P < 0.001), attitude toward burial of the body (P < 0.001), attitude toward having an autopsy carried out (P < 0.001), previous experience of the organ donation and transplantation process (P < 0.001), fear of mutilation after donation (P < 0.001), knowledge that the Church has a positive attitude toward organ donation and transplantation (P < 0.001), knowledge of one's partner's attitude toward organ donation (P < 0.001), and a belief that one might need a transplant in the future (P < 0.001). The donation rates in this population group in Spain are higher than those recorded in their countries of origin (55.76 vs. <10 pmp; P < 0.001). The attitude toward organ donation among LA citizens residing in Spain is slightly worse than that reported in the native Spanish population and is determined by many psychosocial factors. The donation rates of LA citizens in Spain are higher than those in their countries of origin. © 2015 Steunstichting ESOT.

Active tectonics on Lanzarote (Canary Islands) from the analysis of CGPS data

NASA Astrophysics Data System (ADS)

Riccardi, Umberto; Arnoso, Jose; Benavent, María Teresa; Velez, Emilio; Tammaro, Umberto; González Montesinos, Fuensanta

2017-04-01

We report on the analysis of about three years of CGPS data collected on a small network consisting in five permanent stations, with the largest baseline up to 40 km, spread over Timanfaya National Park in Lanzarote Island. The GPS stations are operated by different institutions, as follows: CAME is co-operated by the Institute of Geosciences (CSIC-UCM), DiSTAR and the Geodesy Research Group of University Complutense of Madrid (GRG-UCM), while LACV is operated by (CSIC-UCM and GRG-UCM). Stations HRIA, TIAS, YAIZ, belong to GRAFCAN (Cartographical Service of the Government of Canary Islands). Lanzarote is the most Northeast and the oldest island of the Canarian Archipelago (Spain), which is located on a transitional zone, a passive margin, between oceanic and continental crust. Due to some peculiarities in geochemistry and geochronology of the rocks as well as tectonics, the origin of the archipelago from a hot spot is still debated. In fact, the most recent Holocenic volcanism is scattered over the islands and the last eruption was a submarine one, occurred in October 2011 at El Hierro Island. The last eruption in Lanzarote was a 7 years voluminous eruptive cycle, occurred during the 18th century. Historical seismicity registered in the region, is customarily attributed to diffuse tectonic activity. This study is intended to contributing to shed light on the active tectonics on Lanzarote island and to separate between local and regional strain fields. With the aid of Gamit 10.6 software, we compute from the GPS observations the "ionofree" linear combinations in order to obtain the positions of the stations in ITRF2008 frame using daily sessions, and IGS precise ephemeris. The frame referencing of the network is realized by eleven IGS GPS stations. Then through a Kalman filtering procedure, implemented in GLOBK software, we obtain the final daily solutions by constraining the fiducial GPS stations to their ITRF2008 coordinates. For a reliable strain field retrieval, a careful study is preliminarily carried out on the time series of the daily solutions aimed at characterizing and filtering out the seasonal periodicities related to "non-tectonic" sources. A tentative strain field is reconstructed through the analysis of the time evolution of the web of the possible baselines ranging the stations. Finally, we try to interpret the observed displacement and strain field in the framework of the known tectonic setting coming from previous and ongoing geophysical studies.

CARMENES: management of a schedule-driven project

NASA Astrophysics Data System (ADS)

García-Vargas, M. L.; Caballero, J.; Pérez-Calpena, A.; Amado, Pedro; Seifert, Walter; Azzaro, Marco; Mandel, Holger; Quirrenbach, Andreas; Ribas, Ignasi; Reiners, Ansgar; Guenther, Eike; Gesa, Lluís.; Galadí, David; Aceituno, Jesús

2016-08-01

CARMENES (Calar Alto high-Resolution search for M dwarfs with Exoearths with Near-infrared and optical Échelle Spectrographs) is an instrument consistent in two ultra-stable high resolution (R 82,000) spectrographs covering simultaneously the visible (0.5 - 1.0μm) and near-IR (1.0 - 1.7μm) ranges to provide high-accuracy radial-velocity measurements (˜1 m/s) thanks to the long-term stability. CARMENES was the initiative of a consortium of eleven German and Spanish institutions. CARMENES has been built for the 3.5m telescope at the Centro Astronómico Hipano- Alemán (CAHA), Calar Alto Observatory (Almería, Spain) and is currently in operation. CAHA is jointly operated by the Max-Planck-Society (MPG) and the Spanish National Research Council (CSIC). The project received the green light in October 2010 and in February 2013 passed a Final Design Review. Six months later, the MPG and CSIC, the observatory's owners, made an independent evaluation concluding that CARMENES had to be ready for operations at the end of 2015. Since then, fulfilling the calendar was the driver of all project decisions. Moreover, the observatory's survival was linked to the instrument's success: should the instrument fail, the observatory would be closed. On the contrary, the instrument's success would give unique capabilities to the Observatory for Big Science. Such a challenge became to be our private Olympic Games: we had to be on time. This decision definitively impacted on the project dynamics, there was no room for a delay. The deadline, December 31st, 2015, was controlled by a strict tracking of the critical path; calendar deviations were corrected with risky decisions while fast tracking or even crashing methods were applied. The management scenario was far from optimum: most key people in the project shared their time with other duties; the observatory funding cuts; the budget was tight and distributed among the 11 partner centers with their own different rules, etc. Despite these difficulties, the close coordination among the project manager, the system engineer and the work package managers, the hard work of the whole team, and the support from the observatory were our best bets. Two frenetic years after the calendar decision, we had manufactured, integrated and tested the two spectrographs and we were commissioning the instrument. The instrument first light took place on November, 9th, 2015 and CARMENES entered in operation at the end of December 2015. This paper describes the keys to success.

CALIFA, the Calar Alto Legacy Integral Field Area survey. II. First public data release

NASA Astrophysics Data System (ADS)

Husemann, B.; Jahnke, K.; Sánchez, S. F.; Barrado, D.; Bekeraitė, S.; Bomans, D. J.; Castillo-Morales, A.; Catalán-Torrecilla, C.; Cid Fernandes, R.; Falcón-Barroso, J.; García-Benito, R.; González Delgado, R. M.; Iglesias-Páramo, J.; Johnson, B. D.; Kupko, D.; López-Fernandez, R.; Lyubenova, M.; Marino, R. A.; Mast, D.; Miskolczi, A.; Monreal-Ibero, A.; Gil de Paz, A.; Pérez, E.; Pérez, I.; Rosales-Ortega, F. F.; Ruiz-Lara, T.; Schilling, U.; van de Ven, G.; Walcher, J.; Alves, J.; de Amorim, A. L.; Backsmann, N.; Barrera-Ballesteros, J. K.; Bland-Hawthorn, J.; Cortijo, C.; Dettmar, R.-J.; Demleitner, M.; Díaz, A. I.; Enke, H.; Florido, E.; Flores, H.; Galbany, L.; Gallazzi, A.; García-Lorenzo, B.; Gomes, J. M.; Gruel, N.; Haines, T.; Holmes, L.; Jungwiert, B.; Kalinova, V.; Kehrig, C.; Kennicutt, R. C.; Klar, J.; Lehnert, M. D.; López-Sánchez, Á. R.; de Lorenzo-Cáceres, A.; Mármol-Queraltó, E.; Márquez, I.; Mendez-Abreu, J.; Mollá, M.; del Olmo, A.; Meidt, S. E.; Papaderos, P.; Puschnig, J.; Quirrenbach, A.; Roth, M. M.; Sánchez-Blázquez, P.; Spekkens, K.; Singh, R.; Stanishev, V.; Trager, S. C.; Vilchez, J. M.; Wild, V.; Wisotzki, L.; Zibetti, S.; Ziegler, B.

2013-01-01

We present the first public data release (DR1) of the Calar Alto Legacy Integral Field Area (CALIFA) survey. It consists of science-grade optical datacubes for the first 100 of eventually 600 nearby (0.005 < z < 0.03) galaxies, obtained with the integral-field spectrograph PMAS/PPak mounted on the 3.5 m telescope at the Calar Alto observatory. The galaxies in DR1 already cover a wide range of properties in color-magnitude space, morphological type, stellar mass, and gas ionization conditions. This offers the potential to tackle a variety of open questions in galaxy evolution using spatially resolved spectroscopy. Two different spectral setups are available for each galaxy, (i) a low-resolution V500 setup covering the nominal wavelength range 3745-7500 Å with a spectral resolution of 6.0 Å (FWHM), and (ii) a medium-resolution V1200 setup covering the nominal wavelength range 3650-4840 Å with a spectral resolution of 2.3 Å (FWHM). We present the characteristics and data structure of the CALIFA datasets that should be taken into account for scientific exploitation of the data, in particular the effects of vignetting, bad pixels and spatially correlated noise. The data quality test for all 100 galaxies showed that we reach a median limiting continuum sensitivity of 1.0 × 10-18 erg s-1 cm-2 Å-1 arcsec-2 at 5635 Å and 2.2 × 10-18 erg s-1 cm-2 Å-1 arcsec-2 at 4500 Å for the V500 and V1200 setup respectively, which corresponds to limiting r and g band surface brightnesses of 23.6 mag arcsec-2 and 23.4 mag arcsec-2, or an unresolved emission-line flux detection limit of roughly 1 × 10-17 erg s-1 cm-2 arcsec-2 and 0.6 × 10-17 erg s-1 cm-2 arcsec-2, respectively. The median spatial resolution is 3farcs7, and the absolute spectrophotometric calibration is better than 15% (1σ). We also describe the available interfaces and tools that allow easy access to this first publicCALIFA data at http://califa.caha.es/DR1 Based on observations collected at the Centro Astronómico Hispano Alemán (CAHA) at Calar Alto, operated jointly by the Max- Planck-Institut für Astronomie (MPIA) and the Instituto de Astrofísica de Andalucía (CSIC).

Dietary Marine ω-3 Fatty Acids and Incident Sight-Threatening Retinopathy in Middle-Aged and Older Individuals With Type 2 Diabetes: Prospective Investigation From the PREDIMED Trial.

PubMed

Sala-Vila, Aleix; Díaz-López, Andrés; Valls-Pedret, Cinta; Cofán, Montserrat; García-Layana, Alfredo; Lamuela-Raventós, Rosa-María; Castañer, Olga; Zanon-Moreno, Vicente; Martinez-Gonzalez, Miguel A; Toledo, Estefanía; Basora, Josep; Salas-Salvadó, Jordi; Corella, Dolores; Gómez-Gracia, Enrique; Fiol, Miquel; Estruch, Ramón; Lapetra, José; Fitó, Montserrat; Arós, Fernando; Serra-Majem, Luis; Pintó, Xavier; Ros, Emilio

2016-10-01

Diabetic retinopathy (DR) is a devastating complication of individuals with type 2 diabetes mellitus. The retina is rich in long-chain ω-3 polyunsaturated fatty acids (LCω3PUFAs), which are substrate for oxylipins with anti-inflammatory and antiangiogenic properties. Experimental models support dietary LCω3PUFA protection against DR, but clinical data are lacking. To determine whether LCω3PUFA intake relates to a decreased incidence of sight-threatening DR in individuals with type 2 diabetes older than 55 years. In late 2015, we conceived a prospective study within the randomized clinical trial Prevención con Dieta Mediterránea (PREDIMED), testing Mediterranean diets supplemented with extra virgin olive oil or nuts vs a control diet for primary cardiovascular prevention. The trial was conducted in primary health care centers in Spain. From 2003 to 2009, 3614 individuals aged 55 to 80 years with a previous diagnosis of type 2 diabetes were recruited. Full data were available for 3482 participants (48% men; mean age 67 years). Meeting the dietary LCω3PUFA recommendation of at least 500 mg/d for primary cardiovascular prevention, as assessed by a validated food-frequency questionnaire. The main outcome was incident DR requiring laser photocoagulation, vitrectomy, and/or antiangiogenic therapy confirmed by an external adjudication committee. Of the 3482 participants, 48% were men and the mean age was 67 years. A total of 2611 participants (75%) met target LCω3PUFA recommendation. During a median follow-up of 6 years, we documented 69 new events. After adjusting for age, sex, intervention group, and lifestyle and clinical variables, participants meeting the LCω3PUFA recommendation at baseline (≥500 mg/d) compared with those not fulfilling this recommendation (<500 mg/d) showed a 48% relatively reduced risk of incident sight-threatening DR, with a hazard ratio of 0.52 (95% CI, 0.31-0.88; P = .001). This association was slightly stronger for yearly updated LCω3PUFA intake (relative risk, 0.48; 95% CI, 0.28-0.82; P = .007). In middle-aged and older individuals with type 2 diabetes, intake of at least 500 mg/d of dietary LCω3PUFA, easily achievable with 2 weekly servings of oily fish, is associated with a decreased risk of sight-threatening DR. Our results concur with findings from experimental models and the current model of DR pathogenesis. clinicaltrials.gov Identifier: http://www.controlled-trials.com/ISRCTN35739639.

Estudio de Maseres Circunestelares de Monoxido de Silicio con muy alta Resolucion Espacial

NASA Astrophysics Data System (ADS)

Soria-Ruiz, Rebeca

2006-03-01

We present high-spatial and high-spectral resolution studies of SiO masers in the circumstellar envelopes of late-type stars. These masers occur in the inner layers of the CSEs, in a region dominated by the stellar pulsation, thus being good (if not the only) probes available to understand the physics in these regions. Using the NRAO Very Long Baseline Array, we have produced maps of the 28SiO v=1 and v=2 J=1-0 and J=2-1 transitions towards several AGB stars: two Mira-type (TXCam and RLeo), one OH/IR (IRC+10011) and one S-type (xCyg) stars. The 29SiO v=0 J=1-0 and J=2-1 emission has also been studied. The spatial distributions retrieved, some of them for the first time, are in clear contradiction with the predictions of the models developed to date. We suggest that spectral line overlap may explain the results obtained. This work has been conducted by Dr. Javier Alcolea Jimenez and Dr. Francisco Colomer Sanmartin, at Observatorio Astronomico Nacional (Spain). The PhD thesis manuscript, in spanish, is available at ftp://ftp.oan.es/pub/users/r.soria/TESIS-RSoria.pdf .

Formalize clinical processes into electronic health information systems: Modelling a screening service for diabetic retinopathy.

PubMed

Eguzkiza, Aitor; Trigo, Jesús Daniel; Martínez-Espronceda, Miguel; Serrano, Luis; Andonegui, José

2015-08-01

Most healthcare services use information and communication technologies to reduce and redistribute the workload associated with follow-up of chronic conditions. However, the lack of normalization of the information handled in and exchanged between such services hinders the scalability and extendibility. The use of medical standards for modelling and exchanging information, especially dual-model based approaches, can enhance the features of screening services. Hence, the approach of this paper is twofold. First, this article presents a generic methodology to model patient-centered clinical processes. Second, a proof of concept of the proposed methodology was conducted within the diabetic retinopathy (DR) screening service of the Health Service of Navarre (Spain) in compliance with a specific dual-model norm (openEHR). As a result, a set of elements required for deploying a model-driven DR screening service has been established, namely: clinical concepts, archetypes, termsets, templates, guideline definition rules, and user interface definitions. This model fosters reusability, because those elements are available to be downloaded and integrated in any healthcare service, and interoperability, since from then on such services can share information seamlessly. Copyright © 2015 Elsevier Inc. All rights reserved.

COPRED: prediction of fold, GO molecular function and functional residues at the domain level.

PubMed

López, Daniel; Pazos, Florencio

2013-07-15

Only recently the first resources devoted to the functional annotation of proteins at the domain level started to appear. The next step is to develop specific methodologies for predicting function at the domain level based on these resources, and to implement them in web servers to be used by the community. In this work, we present COPRED, a web server for the concomitant prediction of fold, molecular function and functional sites at the domain level, based on a methodology for domain molecular function prediction and a resource of domain functional annotations previously developed and benchmarked. COPRED can be freely accessed at http://csbg.cnb.csic.es/copred. The interface works in all standard web browsers. WebGL (natively supported by most browsers) is required for the in-line preview and manipulation of protein 3D structures. The website includes a detailed help section and usage examples. pazos@cnb.csic.es.

Stressed Oxidation of C/SiC Composites

NASA Technical Reports Server (NTRS)

Halbig, Michael C.; Brewer, David N.; Eckel, Andrew J.; Cawley, James D.

1997-01-01

Constant load, stressed oxidation testing was performed on T-300 C/SiC composites with a SiC seal coat. Test conditions included temperatures ranging from 350 C to 1500 C at stresses of 69 MPa and 172 MPa (10 and 25 ksi). The coupon subjected to stressed oxidation at 550 C/69 MPa for 25 hours had a room temperature residual strength one-half that of the as-received coupons. The coupon tested at the higher stress and all coupons tested at higher temperatures failed in less than 25 hr. Microstructural analysis of the fracture surfaces, using SEM (scanning electron microscopy), revealed the formation of reduced cross-sectional fibers with pointed tips. Analysis of composite cross-sections show pathways for oxygen ingress. The discussion will focus on fiber/matrix interphase oxidation and debonding as well as the formation and implications of the fiber tip morphology.

Transition from Irradiation-Induced Amorphization to Crystallization in Nanocrystalline Silicon Carbide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Weilin; Jiao, Liang; Wang, Haiyan

2011-12-01

Response to irradiation of nanocrystalline 3C-SiC is studied using 2 MeV Au+ ions near the critical temperature for amorphization and is compared to the behavior of its monocrystalline counterpart under the identical irradiation conditions. The irradiated samples have been characterized using in-situ ion channeling, ex-situ x-ray diffraction, and helium ion microscopy. Compared to monocrystalline 3C-SiC, a faster amorphization process in the nanocrystalline material (average grain size = 3.3 nm) is observed at 500 K. However, the nanograin grows with increasing ion fluence at 550 K and the grain size tends to saturate at high fluences. The striking contrast demonstrates amore » sharp transition from irradiation-induced interface-driven amorphization at 500 K to crystallization at 550 K. The results could show potential impacts of nanocrystalline SiC on nuclear fuel cladding and structural components of next-generation nuclear energy systems.« less

Acoustic Emission and Damage Accumulation for Various Woven C/SiC Composites Tested in Tension at Room Temperature

NASA Technical Reports Server (NTRS)

Morscher, Gregory; Petko, Jeanne; Kiser, James D.

2002-01-01

Modal acoustic emission (AE) has proven to be an excellent technique to monitor damage accumulation in ceramic matrix composites. In this study, AE was used to monitor tensile load-unload-reload hysteresis tests for a variety of C fiber reinforced, Sic matrix composites. C/SiC composites were reinforced with T-300 and IM7 fibers, had C, multilayer, or pseudo-porous C interphases, and had chemical vapor infiltrated Sic or melt-infiltrated SiC matrices. All of the composites exhibited considerable AE during testing. The extent and nature of the AE activity will be analyzed and discussed in light of matrix cracking and the variety of composite constituents. It is hoped that understanding the nature of stress-dependent damage accumulation in these materials can be of use in life-modeling for these types of composites.

Acoustic Emission and Damage Accumulation for Various Woven C/SiC Composites Tested in Tension at Room Temperature

NASA Technical Reports Server (NTRS)

Morscher, Gregory N.; Petko, Jeanne; Kiser, James D.; Gray, Hugh R. (Technical Monitor)

2002-01-01

Modal acoustic emission (AE) has proven to be an excellent technique to monitor damage accumulation in ceramic matrix composites. In this study, AE was used to monitor tensile load-unload-reload hysteresis tests for a variety of C fiber reinforced, SiC matrix composites. C/SiC composites were reinforced with T300 and IM7 fibers, had C, multilayer, or pseudo-porous C interphases, and had chemical vapor infiltrated SiC or melt-infiltrated SiC matrices. All of the composites exhibited considerable AE during testing. The extent and nature of the AE activity will be analyzed and discussed in light of matrix cracking and the variety of composite constituents. It is hoped that understanding the nature of stress dependent damage accumulation in these materials can be of use in life modeling for these types of composites.

Properties of Nanocrystalline Cubic Silicon Carbide Thin Films Prepared by Hot-Wire Chemical Vapor Deposition Using SiH4/CH4/H2 at Various Substrate Temperatures

NASA Astrophysics Data System (ADS)

Tabata, Akimori; Komura, Yusuke; Hoshide, Yoshiki; Narita, Tomoki; Kondo, Akihiro

2008-01-01

Silicon carbide (SiC) thin films were prepared by hot-wire chemical vapor deposition from SiH4/CH4/H2 gases, and the influence of substrate temperature, Ts (104 < Ts < 434 °C), on the properties of the SiC thin films was investigated. X-ray diffraction patterns and Raman scattering spectra revealed that nanocrystalline cubic SiC (nc-3C-SiC) films grew at Ts above 187 °C, while completely amorphous films grew at Ts = 104 °C. Fourier transform infrared absorption spectra revealed that the crystallinity of the nc-3C-SiC was improved with increasing Ts up to 282 °C and remained almost unchanged with a further increase in Ts from 282 to 434 °C. The spin density was reduced monotonically with increasing Ts.

Effect of Matrix Multicracking on the Hysteresis Loops of Carbon-Fiber-Reinforced Cross-Ply Ceramic-Matrix Composites

NASA Astrophysics Data System (ADS)

Li, L. B.

2017-01-01

The effect of matrix multicracking on the stress-strain hysteresis loops of cross-ply C/SiC ceramic-matrix composites (CMCs) under cyclic loading/unloading was investigated. When matrix multicracking and fiber/matrix interface debonding occur in the 0° plies, fiber slipping relative to the matrix in the debonded region of interface is the mainly reason for occurrence of the loops. The interfacial slip lengths, i.e., the debonded lengths of interface are determined, with consideration of matrix multicracking in the 90° and 0° plies, by using the fracture mechanics approach. The effects of peak stress, fiber volume content, fiber/matrix interfacial shear stress, and number of cycles on the hysteresis loops are analyzed. The stress-strain hysteresis loops of cross-ply C/SiC composites corresponding to different peak stresses and numbers of cycles are predicted.

Damage Evolution and Life Prediction of Cross-Ply C/SiC Ceramic-Matrix Composite under Cyclic Fatigue Loading at Room Temperature and 800 °C in Air

PubMed Central

Li, Longbiao

2015-01-01

The damage evolution and life prediction of cross-ply C/SiC ceramic-matrix composite (CMC) under cyclic-fatigue loading at room temperature and 800 °C in air have been investigated using damage parameters derived from fatigue hysteresis loops, i.e., fatigue hysteresis modulus and fatigue hysteresis loss energy. The experimental fatigue hysteresis modulus and fatigue hysteresis loss energy degrade with increasing applied cycles attributed to transverse cracks in the 90° plies, matrix cracks and fiber/matrix interface debonding in the 0° plies, interface wear at room temperature, and interface and carbon fibers oxidation at 800 °C in air. The relationships between fatigue hysteresis loops, fatigue hysteresis modulus and fatigue hysteresis loss energy have been established. Comparing experimental fatigue hysteresis loss energy with theoretical computational values, the fiber/matrix interface shear stress corresponding to different cycle numbers has been estimated. It was found that the degradation rate at 800 °C in air is much faster than that at room temperature due to serious oxidation in the pyrolytic carbon (PyC) interphase and carbon fibers. Combining the fiber fracture model with the interface shear stress degradation model and the fibers strength degradation model, the fraction of broken fibers versus the cycle number can be determined for different fatigue peak stresses. The fatigue life S-N curves of cross-ply C/SiC composite at room temperature and 800 °C in air have been predicted. PMID:28793728

Damage Evolution and Life Prediction of Cross-Ply C/SiC Ceramic-Matrix Composite under Cyclic Fatigue Loading at Room Temperature and 800 °C in Air.

PubMed

Li, Longbiao

2015-12-09

The damage evolution and life prediction of cross-ply C/SiC ceramic-matrix composite (CMC) under cyclic-fatigue loading at room temperature and 800 °C in air have been investigated using damage parameters derived from fatigue hysteresis loops, i.e. , fatigue hysteresis modulus and fatigue hysteresis loss energy. The experimental fatigue hysteresis modulus and fatigue hysteresis loss energy degrade with increasing applied cycles attributed to transverse cracks in the 90° plies, matrix cracks and fiber/matrix interface debonding in the 0° plies, interface wear at room temperature, and interface and carbon fibers oxidation at 800 °C in air. The relationships between fatigue hysteresis loops, fatigue hysteresis modulus and fatigue hysteresis loss energy have been established. Comparing experimental fatigue hysteresis loss energy with theoretical computational values, the fiber/matrix interface shear stress corresponding to different cycle numbers has been estimated. It was found that the degradation rate at 800 °C in air is much faster than that at room temperature due to serious oxidation in the pyrolytic carbon (PyC) interphase and carbon fibers. Combining the fiber fracture model with the interface shear stress degradation model and the fibers strength degradation model, the fraction of broken fibers versus the cycle number can be determined for different fatigue peak stresses. The fatigue life S-N curves of cross-ply C/SiC composite at room temperature and 800 °C in air have been predicted.

EBSD characterization of the growth mechanism of SiC synthesized via direct microwave heating

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Jigang, E-mail: wangjigang@seu.edu.cn; Xizang Key Laboratory of Optical Information Processing and Visualization Technology, School of Information Engineering, Xizang Minzu University, Xianyang 712082; Huang, Shan

2016-04-15

Well-crystallized 3C-silicon carbide (SiC) grains/nanowires have been synthesized rapidly and conveniently via direct microwave heating, simply using silicon dioxide powders and artificial graphite as raw materials. The comprehensive characterizations have been employed to investigate the micro-structure of the obtained 3C-SiC products. Results indicated that, different from the classic screw dislocation growth mechanism, the 3C-SiC grains/nanowires synthesized via high-energy vacuum microwave irradiation were achieved through the two-dimension nucleation and laminar growth mechanism. Especially, the electron backscattered diffraction (EBSD) was employed to characterize the crystal planes of the as-grown SiC products. The calculated Euler angles suggested that the fastest-growing crystal planes (211)more » were overlapped gradually. Through the formation of the (421) transformation plane, (211) finally evolved to (220) which existed as the side face of SiC grains. The most stable crystal planes (111) became the regular hexagonal planes in the end, which could be explained by the Bravais rule. The characterization results of EBSD provided important experimental information for the evolution of crystal planes. - Graphical abstract: The formation of 3C-SiC prepared via direct microwave heating follows the mechanism of two-dimension nucleation and laminar growth. - Highlights: • 3C−SiC grains/nanowires were obtained via direct microwave heating. • 3C−SiC followed the mechanism of two-dimension nucleation and laminar growth. • In-situ EBSD analysis provided the experimental evidences of the growth.« less

Venus Cloud Morphology and Motions from Ground-based Images at the Time of the Akatsuki Orbit Insertion

NASA Astrophysics Data System (ADS)

Sánchez-Lavega, A.; Peralta, J.; Gomez-Forrellad, J. M.; Hueso, R.; Pérez-Hoyos, S.; Mendikoa, I.; Rojas, J. F.; Horinouchi, T.; Lee, Y. J.; Watanabe, S.

2016-12-01

We report Venus image observations around the two maximum elongations of the planet at 2015 June and October. From these images we describe the global atmospheric dynamics and cloud morphology in the planet before the arrival of JAXA’s Akatsuki mission on 2015 December 7. The majority of the images were acquired at ultraviolet wavelengths (380-410 nm) using small telescopes. The Venus dayside was also observed with narrowband filters at other wavelengths (890 nm, 725-950 nm, 1.435 μm CO2 band) using the instrument PlanetCam-UPV/EHU at the 2.2 m telescope in Calar Alto Observatory. In all cases, the lucky imaging methodology was used to improve the spatial resolution of the images over the atmospheric seeing. During the April-June period, the morphology of the upper cloud showed an irregular and chaotic texture with a well-developed equatorial dark belt (afternoon hemisphere), whereas during October-December the dynamical regime was dominated by planetary-scale waves (Y-horizontal, C-reversed, and ψ-horizontal features) formed by long streaks, and banding suggesting more stable conditions. Measurements of the zonal wind velocity with cloud tracking in the latitude range from 50°N to 50°S shows agreement with retrievals from previous works. Partially based on observations obtained at Centro Astronómico Hispano Alemán, Observatorio de Calar Alto MPIA-CSIC, Almería, Spain.

New ultracool subdwarfs identified in large-scale surveys using Virtual Observatory tools

NASA Astrophysics Data System (ADS)

Lodieu, N.; Espinoza Contreras, M.; Zapatero Osorio, M. R.; Solano, E.; Aberasturi, M.; Martín, E. L.; Rodrigo, C.

2017-02-01

Aims: We aim to develop an efficient method to search for late-type subdwarfs (metal-depleted dwarfs with spectral types ≥M5) to improve the current statistics. Our objectives are to improve our knowledge of metal-poor low-mass dwarfs, bridge the gap between the late-M and L types, determine their surface density, and understand the impact of metallicity on the stellar and substellar mass function. Methods: We carried out a search cross-matching the Sloan Digital Sky Survey (SDSS) Data Release 7 (DR7) and the Two Micron All Sky Survey (2MASS), and different releases of SDSS and the United Kingdom InfraRed Telescope (UKIRT) Infrared Deep Sky Survey (UKIDSS) using STILTS, Aladin, and Topcat developed as part of the Virtual Observatory tools. We considered different photometric and proper motion criteria for our selection. We identified 29 and 71 late-type subdwarf candidates in each cross-correlation over 8826 and 3679 sq. deg, respectively (2312 sq. deg overlap). We obtained our own low-resolution optical spectra for 71 of our candidates: 26 were observed with the Gran Telescopio de Canarias (GTC; R 350, λλ5000-10 000 Å), six with the Nordic Optical Telescope (NOT; R 450, λλ5000-10 700 Å), and 39 with the Very Large Telescope (VLT; R 350, λλ6000-11 000 Å). We also retrieved spectra for 30 of our candidates from the SDSS spectroscopic database (R 2000 and λλ 3800-9400 Å), nine of these 30 candidates with an independent spectrum in our follow-up. We classified 92 candidates based on 101 optical spectra using two methods: spectral indices and comparison with templates of known subdwarfs. Results: We developed an efficient photometric and proper motion search methodology to identify metal-poor M dwarfs. We confirmed 86% and 94% of the candidates as late-type subdwarfs from the SDSS vs. 2MASS and SDSS vs. UKIDSS cross-matches, respectively. These subdwarfs have spectral types ranging between M5 and L0.5 and SDSS magnitudes in the r = 19.4-23.3 mag range. Our new late-type M discoveries include 49 subdwarfs, 25 extreme subdwarfs, six ultrasubdwarfs, one subdwarf/extreme subdwarf, and two dwarfs/subdwarfs. In addition, we discovered three early-L subdwarfs to add to the current compendium of L-type subdwarfs known to date. We doubled the numbers of cool subdwarfs (11 new from SDSS vs. 2MASS and 50 new from SDSS vs. UKIDSS). We derived a surface density of late-type subdwarfs of 0.040 per square degree in the SDSS DR7 vs. UKIDSS LAS DR10 cross-match (J = 15.9-18.8 mag) after correcting for incompleteness. The density of M dwarfs decreases with decreasing metallicity. We also checked the Wide Field Survey Explorer (AllWISE) photometry of known and new subdwarfs and found that mid-infrared colours of M subdwarfs do not appear to differ from their solar-metallicity counterparts of similar spectral types. However, the near-to-mid-infrared colours J-W2 and J-W1 are bluer for lower metallicity dwarfs, results that may be used as a criterion to look for late-type subdwarfs in future searches. Based on observations made with ESO Telescopes at the La Silla Paranal Observatory under programmes IDs 088.C-0250(A), 090.C-0832(A).Based on observations made with the Nordic Optical Telescope, operated by the Nordic Optical Telescope Scientific Association at the Observatorio del Roque de los Muchachos, La Palma, Spain, of the Instituto de Astrofísica de Canarias.Based on observations made with the Gran Telescopio Canarias (GTC), installed in the Spanish Observatorio del Roque de los Muchachos of the Instituto de Astrofísica de Canarias, in the island of La Palma (programs GTC44-09B, GTC53-10B, GTC31-MULTIPLE-11B, GTC36/12B, and GTC79-14A).The data presented in this paper are gathered in a VO-compliant archive at http://svo2.cab.inta-csic.es/vocats/ltsa/The photometric and spectroscopic data are available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/598/A92

Polar Science: From the Field to the Classroom (Invited)

NASA Astrophysics Data System (ADS)

O'Neill, M.; O'Brien, K.

2010-12-01

The ARMADA Project was a National Science Foundation Project organized by the Office of Marine Programs of the University of Rhode Island. ARMADA connected scientists and teachers to conduct field research together and share directly with the classroom. In addition to the field research, ARMADA teachers mentored new science teachers to assist in teacher retention and presented at National Science Teachers’ Association National Conventions. As an ARMADA teacher, I participated in two polar research experiences. In 2007, I worked with scientists from the University of Barcelona, Spain in the Arctic off the coast of Svalbard conducting seafloor mapping and sediment core sampling. My second research experience was to Antarctica in 2009 with Dr. Kristin O’Brien and her team studying Antarctic Ice Fish and their tolerance to temperature change. Sharing ship time with Dr. O’Brien was a team of scientists from Duke University studying humpback whales and their feeding behaviors. I was able to join both research teams and share the information with students, colleagues and the community. Connecting directly with scientists in the field has not only increased my personal knowledge of polar science, but has been invaluable to my teaching efforts. While in the Arctic, I was able to conduct a telephone conference with my students and the lead scientist via the satellite phone. From Antarctica I connected with several classes from Fairhope High School in a “Live from Antarctica” video conference. I was able to take them on a “virtual tour” of Palmer Station and Dr. O’Brien and Dr. Crockett answered student questions about Antarctic Fish. During both expeditions, I maintained a daily blog that enable my students to follow along with my research experience. Being able to bring the most current scientific research into the classroom with these expeditions has been inspiring for the students, colleagues and community.

Characterization and complete genome sequence of a novel N4-like bacteriophage, pSb-1 infecting Shigella boydii.

PubMed

Jun, Jin Woo; Yun, Sae Kil; Kim, Hyoun Joong; Chai, Ji Young; Park, Se Chang

2014-10-01

Shigellosis is one of major foodborne pathogens in both developed and developing countries. Although antibiotic therapy is considered an effective treatment for shigellosis, the imprudent use of antibiotics has led to the increase of multiple-antibiotic-resistant Shigella species globally. In this study, we isolated a virulent Podoviridae bacteriophage (phage), pSb-1, that infects Shigella boydii. One-step growth analysis revealed that this phage has a short latent period (15 min) and a large burst size (152.63 PFU/cell), indicating that pSb-1 has good host infectivity and effective lytic activity. The double-stranded DNA genome of pSb-1 is composed of 71,629 bp with a G + C content of 42.74%. The genome encodes 103 putative ORFs, 9 putative promoters, 21 transcriptional terminators, and one tRNA region. Genome sequence analysis of pSb-1 and comparative analysis with the homologous phage EC1-UPM, N4-like phage revealed that there is a high degree of similarity (94%, nucleotide sequence identity) between pSb-1 and EC1-UPM in 73 of the 103 ORFs of pSb-1. The results of this investigation indicate that pSb-1 is a novel virulent N4-like phage infecting S. boydii and that this phage might have potential uses against shigellosis. Copyright © 2014 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.

78 FR 57839 - Request for Information on Computer Security Incident Coordination (CSIC)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-20

... Institute of Standards and Technology (NIST), United States Department of Commerce. ACTION: Notice, extension of comment period. SUMMARY: NIST is extending the deadline for submitting comments relating to Computer Security Incident Coordination. NIST experienced technical difficulties with receiving email...

Sol-gel derived C-SiC composites and protective coatings for sustained durability in the space environment

NASA Astrophysics Data System (ADS)

Haruvy, Yair; Liedtke, Volker

2003-09-01

Composites and coatings were produced via the fast sol-gel process of a mixture of alkoxysilane precursors. The composites were comprised of carbon fibers, fabrics, or their precursors as reinforcement, and sol-gel-derived silicon carbide as matrix, aiming at high-temperature stable ceramics that can be utilized for re-entry structures. The protective coatings were comprised of fluorine-rich sol-gel derived resins, which exhibit high flexibility and coherence to provide sustained ATOX protection necessary for LEO space-exposed elements. For producing the composites, the sol-gel-derived resin is cast onto the reinforcement fibers/fabrics mat (carbon or its precursors) to produce a 'green' composite that is being cured. The 'green' composite is converted into a C-SiC composite via a gradual heat-pressure process under inert atmosphere, during which the organic substituents on the silicon atoms undergo internal oxidative pyrolysis via the schematic reaction: (SiRO3/2)n -> SiC + CO2 + H2O. The composition of the resultant silicon-oxi-carbide is tailorable via modifying the composition of the sol-gel reactants. The reinforcement, when made of carbon precursors, is converted into carbon during the heat-and-pressure processing as well. The C-SiC composites thus derived exhibit superior thermal stability and comparable thermal conductivity, combined with good mechanical strength features and failure resistance, which render them greatly applicable for re-entry shielding, heat-exchange pipes, and the like. Fluorine rich sol-gel derived coatings were developed as well, via the use of HF rich sol-gel process. These coatings provide oxidation-protection via the silica formation process, together with flexibility that allows 18,000 repetitive folding of the coating without cracking.

Recent Results from Epitaxial Growth on Step Free 4H-SiC Mesas

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Trunek, Andrew J.; Spry, David J.; Powell, J. Anthony; Du, Hui; Skowronski, Marek; Bassim, Nabil D.; Mastro, Michael A.; Twigg, Mark E.; Holm, Ronald T.;

Development and evaluation of a multidisciplinary controlled substances committee within a patient-centered medical home.

PubMed

Gernant, Stephanie A; Bastien, Rachel; Lai, Andrea

2015-01-01

To present the development of a multidisciplinary controlled substances committee and describe its effectiveness in relation to prescribers' acceptance of committee recommendations, the number of premature deaths associated with controlled substances, and prescribers' need for education on controlled substances. A patient-centered medical home and accountable care organization in Maine that serves more than 60,000 patients across a large rural area, 70% of whom are classified as lower income. A multidisciplinary group of prescribers and PharmD residents created a committee to influence organizational culture regarding controlled substances. The Controlled Substances Initiative Committee (CSIC) updated institutional policies, developed provider education, and made personalized patient recommendations to prescribers. The primary outcome was average change in daily morphine equivalent dose (MED) in patients for whom CSIC recommended a dose reduction to the patient's prescriber. Secondary outcomes included the proportion of patients who died of a known overdose or suspected drug-related death during 2012-2013 or 2013-2014. In addition, prescriber beliefs about controlled substances were measured via a needs assessment. The average daily MED for patients whom CSIC recommended dose reduction was lower after 3 months compared with at baseline (175.5 ± 344.3 mg vs. 292.7 ± 466.5 mg; P <0.05). The proportion of patients who died of a known overdose did not differ between 2012-2013 and 2013-2014 (11.8% vs. 11.1%; P = 1.00). However, a greater number of patients had a suspected drug-related death during 2013-2014 compared with during 2012-2013 (0% vs. 27.3%; P = 0.05). A multidisciplinary controlled substances committee may improve patient safety and outcomes by offering prescriber support and helping alter prescribing culture.

RETRACTED: Interactions between planar defects in bulk 3C-SiC

NASA Astrophysics Data System (ADS)

Ikebe, Yohei; Nagasawa, Hiroyuki; Hatta, Naoki; Kawahara, Takamitsu; Yagi, Kuniaki

2014-03-01

Available online 16 December 2013 This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the authors because of a business decision by their employer.

Material strength on 67P/Churyumov-Gerasimenko and its influence on cliff stability

NASA Astrophysics Data System (ADS)

Hofmann, Marc; Güttler, Carsten; Vincent, Jean-Baptiste; Prasanna Deshapriya, J. D.; Pajola, Maurizio; Tubiana, Cecilia; Feller, Clément; Barucci, Maria A.; Sierks, Holger

2017-04-01

The OSIRIS scientific camera system [1] on board ESA's Rosetta spacecraft has been observing comet 67P/Churyumov-Gerasimenko since its arrival in August 2014. Visible on the OSIRIS images are cliff structures with associated taluses at their bottom. It is likely that these taluses were created during a (partial) collapse of the neighboring cliff. Several of these taluses display individual boulders with different brightness and spectral slope than the rest of the boulders, indicating a varying content of volatiles. A possible cause for the collapse of cliffs is thermal stresses and heat that intensify the fracturing of possibly pre-fractured walls or form new fractures. This results in sublimation with a progressively eroding cliff. The direct consequence is the occurrence of gravitational events and formation of boulder fields at the foot of the cliffs [2,3]. Both of these processes serve to weaken the structural integrity of the cliff but it is unclear how large the relative contribution of these processes is. In this study we investigate how the depletion of volatiles and damage to the cliff structure introduced by cracks will change the integrity and stability of the cliff. We aim to derive limits to the material strength to be compared to those found from observed cliffs and cliff collapses [4,5] using the DEM software ESyS Particle [6]. Acknowledgements: OSIRIS was built by a consortium led by the Max-Planck-Institut für Sonnensystemforschung, Göttingen, Germany, in collaboration with CISAS, University of Padova, Italy, the Laboratoire d'Astrophysique de Marseille, France, the Instituto de Astrofísica de Andalucia, CSIC, Granada, Spain, the Scientific Support Office of the European Space Agency, Noordwijk, The Netherlands, the Instituto Nacional de Técnica Aeroespacial, Madrid, Spain, the Universidad Politécnica de Madrid, Spain, the Department of Physics and Astronomy of Uppsala University, Sweden, and the Institut für Datentechnik und Kommunikationsnetze der Technischen Universität Braunschweig, Germany. References: [1] Keller, H. U. et al.: OSIRIS The Scientific Camera System Onboard Rosetta, Space Sci. Rev., 128, pp. 433-506, 2007; [2] Vincent, J.-B. et al.: Are fractured cliffs the source of cometary dust jets? Insights from OSIRIS/Rosetta at 67P/Churyumov-Gerasimenko, A&A, 587:A14, 2016; [3] Pajola, M. et al.: Aswan site on comet 67P/Churyumov-Gerasimenko: Morphology, boulder evolution, and spectrophotometry, A&A, 592:A69, 2016; [4] Sierks, H. et al.: On the nucleus structure and activity of comet 67P/Churyumov-Gerasimenko, Science, 347, 2015; [5] Groussin, O. et al.: Gravitational slopes, geomorphology, and material strengths of the nucleus of comet 67P/Churyumov-Gerasimenko from OSIRIS observations, A&A, 583:A32, 2015; [6] https://launchpad.net/esys-particle

Spanish participation in the development of HARMONI, the first light integral field spectrograph for the E-ELT.

NASA Astrophysics Data System (ADS)

García-Lorenzo, B.; HARMONI Consortium

2015-05-01

HARMONI is the visible and near infrared integral field spectrograph (IFS) selected as a first-light instrument for the European Extremely Large Telescope (E-ELT). With four spatial scales and a range of spectral resolving powers, astronomers will optimally configure the instrument to overtake a wide range of scientific programs and to address many of the E-ELT science cases. The Centro de Astrobiología del CSIC/INTA (CAB-CSIC) and the Instituto de Astrofísica de Canarias (IAC) form part of the international consortium developing HARMONI, participation that will constitute an unique scientific opportunity for the Spanish astronomical community, allowing the access to the E-ELT as soon as it were operative via the guaranteed time. We describe here the instrument and its capabilities with special attention to the Spanish contribution to HARMONI. At the current stage of the project, HARMONI design is being revised due to significant modifications of the Nasmyth platform affecting the interface with HARMONI.

Aerothermoelastic response analysis for C/SiC panel of ceramic matrix composite shingle thermal protection system

NASA Astrophysics Data System (ADS)

Huo, Lin; Cheng, Xing-Hua; Yang, Tao

2015-05-01

This paper presents a study of aerothermoelastic response of a C/SiC panel, which is a primary structure for ceramic matrix composite shingle thermal protection system for hypersonic vehicles. It is based on a three dimensional thermal protection shingle panel on a quasi-waverider vehicle model. Firstly, the Thin Shock Layer and piston theory are adopted to compute the aerodynamic pressure of rigid body and deformable body, and a series of engineering methods are used to compute the aerodynamic heating. Then an aerothermoelastic loosely-coupled time marching strategy and self-adapting aerodynamic heating time step are developed to analyze the aerothermoelastic response of the panel, with an aerodynamic heating and temperature field coupling parameter selection method being adopted to increase the efficiency. Finally, a few revealing conclusions are reached by analyzing how coupling at different degrees influences the quasi-static aerothermoelastic response of the panel and how aerodynamic pressure of rigid body time step influences the quasi-static aerothermoelastic response on a glide trajectory.

3C-SiC microdisk mechanical resonators with multimode resonances at radio frequencies

NASA Astrophysics Data System (ADS)

Lee, Jaesung; Zamani, Hamidrera; Rajgopal, Srihari; Zorman, Christian A.; X-L Feng, Philip

2017-07-01

We report on the design, modeling, fabrication and measurement of single-crystal 3C-silicon carbide (SiC) microdisk mechanical resonators with multimode resonances operating at radio frequencies (RF). These microdisk resonators (center-clamped on a vertical stem pedestal) offer multiple flexural-mode resonances with frequencies dependent on both disk and anchor dimensions. The resonators are made using a novel fabrication method comprised of focused ion beam nanomachining and hydroflouic : nitric : acetic (HNA) acid etching. Resonance peaks (in the frequency spectrum) are detected through laser-interferometry measurements. Resonators with different dimensions are tested, and multimode resonances, mode splitting, energy dissipation (in the form of quality factor measurement) are investigated. Further, we demonstrate a feedback oscillator based on a passive 3C-SiC resonator. This investigation provides important guidelines for microdisk resonator development, ranging from an analytical prediction of frequency scaling law to fabrication, suggesting RF microdisk resonators can be good candidates for future sensing applications in harsh environments.

Time constant of defect relaxation in ion-irradiated 3C-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wallace, J. B.; Department of Nuclear Engineering, Texas A and M University, College Station, Texas 77843; Bayu Aji, L. B.

Above room temperature, the buildup of radiation damage in SiC is a dynamic process governed by the mobility and interaction of ballistically generated point defects. Here, we study the dynamics of radiation defects in 3C-SiC bombarded at 100 °C with 500 keV Ar ions, with the total ion dose split into a train of equal pulses. Damage–depth profiles are measured by ion channeling for a series of samples irradiated under identical conditions except for different durations of the passive part of the beam cycle. Results reveal an effective defect relaxation time constant of ∼3 ms (for second order kinetics) and a dynamicmore » annealing efficiency of ∼40% for defects in both Si and C sublattices. This demonstrates a crucial role of dynamic annealing at elevated temperatures and provides evidence of the strong coupling of defect accumulation processes in the two sublattices of 3C-SiC.« less

Time constant of defect relaxation in ion-irradiated 3 C-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wallace, J. B.; Bayu Aji, L. B.; Shao, L.

Above room temperature, the buildup of radiation damage in SiC is a dynamic process governed by the mobility and interaction of ballistically generated point defects. Here in this work, we study the dynamics of radiation defects in 3C-SiC bombarded at 100 °C with 500 keV Ar ions, with the total ion dose split into a train of equal pulses. Damage–depth profiles are measured by ion channeling for a series of samples irradiated under identical conditions except for different durations of the passive part of the beam cycle. Results reveal an effective defect relaxation time constant of ~3 ms (for secondmore » order kinetics) and a dynamic annealing efficiency of ~40% for defects in both Si and C sublattices. Finally, this demonstrates a crucial role of dynamic annealing at elevated temperatures and provides evidence of the strong coupling of defect accumulation processes in the two sublattices of 3C-SiC.« less

Isolated oxygen defects in 3C- and 4H-SiC: A theoretical study

NASA Astrophysics Data System (ADS)

Gali, A.; Heringer, D.; Deák, P.; Hajnal, Z.; Frauenheim, Th.; Devaty, R. P.; Choyke, W. J.

2002-09-01

Ab initio calculations in the local-density approximation have been carried out in SiC to determine the possible configurations of the isolated oxygen impurity. Equilibrium geometry and occupation levels were calculated. Substitutional oxygen in 3C-SiC is a relatively shallow effective mass like double donor on the carbon site (OC) and a hyperdeep double donor on the Si site (OSi). In 4H-SiC OC is still a double donor but with a more localized electron state. In 3C-SiC OC is substantially more stable under any condition than OSi or interstitial oxygen (Oi). In 4H-SiC OC is also the most stable one except for heavy n-type doping. We propose that OC is at the core of the electrically active oxygen-related defect family found by deep level transient spectroscopy in 4H-SiC. The consequences of the site preference of oxygen on the SiC/SiO2 interface are discussed.

Ultrasonic Guided-Wave Scan System Used to Characterize Microstructure and Defects in Ceramic Composites

NASA Technical Reports Server (NTRS)

Roth, Don J.; Cosgriff, Laura M.; Martin, Richard E.; Verrilli, Michael J.; Bhatt, Ramakrishna T.

2004-01-01

Ceramic matrix composites (CMCs) are being developed for advanced aerospace propulsion applications to save weight, improve reuse capability, and increase performance. However, mechanical and environmental loads applied to CMCs can cause discrete flaws and distributed microdamage, significantly reducing desirable physical properties. Such microdamage includes fiber/matrix debonding (interface failure), matrix microcracking, fiber fracture and buckling, oxidation, and second phase formation. A recent study (ref. 1) of the durability of a C/SiC CMC discussed the requirement for improved nondestructive evaluation (NDE) methods for monitoring degradation in these materials. Distributed microdamage in CMCs has proven difficult to characterize nondestructively because of the complex microstructure and macrostructure of these materials. This year, an ultrasonic guided-wave scan system developed at the NASA Glenn Research Center was used to characterize various microstructural and flaw conditions in SiC/SiC (silicon carbide fiber in silicon carbide matrix) and C/SiC (carbon fiber in silicon carbide matrix) CMC samples.

The Effect of SiC Polytypes on the Heat Distribution Efficiency of a Phase Change Memory.

NASA Astrophysics Data System (ADS)

Aziz, M. S.; Mohammed, Z.; Alip, R. I.

2018-03-01

The amorphous to crystalline transition of germanium-antimony-tellurium (GST) using three types of silicon carbide’s structure as a heating element was investigated. Simulation was done using COMSOL Multiphysic 5.0 software with separate heater structure. Silicon carbide (SiC) has three types of structure; 3C-SiC, 4H-SiC and 6H-SiC. These structures have a different thermal conductivity. The temperature of GST and phase transition of GST can be obtained from the simulation. The temperature of GST when using 3C-SiC, 4H-SiC and 6H-SiC are 467K, 466K and 460K, respectively. The phase transition of GST from amorphous to crystalline state for three type of SiC’s structure can be determined in this simulation. Based on the result, the thermal conductivity of SiC can affecting the temperature of GST and changed of phase change memory (PCM).

Effect of Environment on Stress-Rupture Behavior of a Carbon Fiber-Reinforced Silicon Carbide (C/SiC) Ceramic Matrix Composite

NASA Technical Reports Server (NTRS)

Verrilli, Michael J.; Opila, Elizabeth J.; Calomino, Anthony; Kiser, J. Douglas

2002-01-01

Stress-rupture tests were conducted in air, vacuum, and steam-containing environments to identify the failure modes and degradation mechanisms of a carbon fiber-reinforced silicon carbide (C/SiC) composite at two temperatures, 600 and 1200 C. Stress-rupture lives in air and steam containing environments (50 - 80% steam with argon) are similar for a composite stress of 69 MPa at 1200 C. Lives of specimens tested in a 20% steam/argon environment were about twice as long. For tests conducted at 600 C, composite life in 20% steam/argon was 20 times longer than life in air. Thermogravimetric analysis of the carbon fibers was conducted under similar conditions to the stress-rupture tests. The oxidation rate of the fibers in the various environments correlated with the composite stress-rupture lives. Examination of the failed specimens indicated that oxidation of the carbon fibers was the primary damage mode for specimens tested in air and steam environments at both temperatures.

Graphene as a Buffer Layer for Silicon Carbide-on-Insulator Structures

PubMed Central

Astuti, Budi; Tanikawa, Masahiro; Rahman, Shaharin Fadzli Abd; Yasui, Kanji; Hashim, Abdul Manaf

2012-01-01

We report an innovative technique for growing the silicon carbide-on-insulator (SiCOI) structure by utilizing polycrystalline single layer graphene (SLG) as a buffer layer. The epitaxial growth was carried out using a hot-mesh chemical vapor deposition (HM-CVD) technique. Cubic SiC (3C-SiC) thin film in (111) domain was realized at relatively low substrate temperature of 750 °C. 3C-SiC energy bandgap of 2.2 eV was confirmed. The Si-O absorption band observed in the grown film can be caused by the out-diffusion of the oxygen atom from SiO2 substrate or oxygen doping during the cleaning process. Further experimental works by optimizing the cleaning process, growth parameters of the present growth method, or by using other growth methods, as well, are expected to realize a high quality SiCOI structure, thereby opening up the way for a breakthrough in the development of advanced ULSIs with multifunctionalities.

Modeling the Monotonic and Cyclic Tensile Stress-Strain Behavior of 2D and 2.5D Woven C/SiC Ceramic-Matrix Composites

NASA Astrophysics Data System (ADS)

Li, L. B.

2018-05-01

The deformation of 2D and 2.5 C/SiC woven ceramic-matrix composites (CMCs) in monotonic and cyclic loadings has been investigated. Statistical matrix multicracking and fiber failure models and the fracture mechanics interface debonding approach are used to determine the spacing of matrix cracks, the debonded length of interface, and the fraction of broken fibers. The effects of fiber volume fraction and fiber Weibull modulus on the damage evolution in the composites and on their tensile stress-strain curves are analyzed. When matrix multicracking and fiber/matrix interface debonding occur, the fiber slippage relative to the matrix in the debonded interface region of the 0° warp yarns is the main reason for the emergance of stress-strain hysteresis loops for 2D and 2.5D woven CMCs. A model of these loops is developed, and histeresis loops for the composites in cyclic loadings/unloadings are predicted.

VizieR Online Data Catalog: Equivalent width of 21 RR Lyrae stars (Pancino+, 2015)

NASA Astrophysics Data System (ADS)

Pancino, E.; Britavskiy, N.; Romano, D.; Cacciari, C.; Mucciarelli, A.; Clementini, G.

2015-02-01

Equivalent widths and atomic data of the absorption lines used in the abundance analysis, for each separate exposure at different phases. Observations of 15 RR Lyrae stars (DR And, X Ari, TW Boo, RZ Cam, RX Cet, U Com, RV CrB, SW CVn, UZ CVn, AE Dra, SZ Gem, VX Her, DH Hya, TU UMa, and RV UMa) and one BL Her star (UY Eri) were carried out with SARG@TNG, operated on the island of La Palma, Spain, during two separate runs in 2009 March and between September and November. Eight stars (SW Aqr, TW Cap, DH Hya, V Ind, SS Leo, V716 Oph, BK Tuc, and UV Vir) were observed with UVES@VLT, between 2009 April and August in service mode. (3 data files).

Evaluation of asphalt rubber membrane interlayer (ARMI) using the University of Florida's composite system interface cracking (CSIC) test.

DOT National Transportation Integrated Search

2012-05-01

Since the late 1970s, FDOT : has applied an interlayer : of Asphalt Rubber : Membrane Interlayer : (ARMI) to asphalt roadway : surfaces. ARMI layers are : constructed by spraying : asphalt rubber binder onto : the asphalt, covering the : layer with n...

Fabrication and characterization of 3C-silicon carbide micro sensor for wireless blood pressure measurements

NASA Astrophysics Data System (ADS)

Basak, Nupur

A potentially implantable single crystal 3C-SiC pressure sensor for blood pressure measurement was designed, simulated, fabricated, characterized and optimized. This research uses a single crystal 3C-SiC, for the first time, to demonstrate its application as a blood pressure measurement sensor. The sensor, which uses the epitaxial grown 3C-SiC membrane to measure changes in pressure, is designed to be wireless, biocompatible and linear. The SiC material was chosen for its superior physical, chemical and mechanical properties; the capacitive sensor uses a 3C-SiC membrane as one of the electrodes; and, the sensor system is wireless for comfort and to allow for convenient reading of real-time pressure data (wireless communication is enabled by connecting the sensor parallel to a planar inductor). Together, the variable capacitive sensor and planar inductor create a pressure sensitive resonant circuit. The sensor system described above allows for implantation into a human patient's body, after which the planar inductor can be coupled with an external inductor to receive data for real-time blood pressure measurement. Electroplating, thick photo-resist characterization, RIE etching, oxidation, CVD, chemical mechanical polishing and wafer bonding were optimized during the process of fabricating the sensor system and, in addition to detailing the sensor system simulation and characterization; the optimized processes are detailed in the dissertation. This absolute pressure sensor is designed to function optimally within the human blood pressure range of 50-350mmHg. The layout and modeling of the sensor uses finite element analysis (FEA) software. The simulations for membrane deflection, stress analysis and electro-mechanical analysis are performed for 100 μm2 and 400μm2sensors. The membrane deflection-pressure, capacitance-pressure and resonant frequency-pressure graphs were obtained, and detailed in the dissertation, along with the planar inductor simulation for differently sized inductors. Ultimately, an optimized sensor with a size of 400μm2 was chosen because of its high sensitivity. The sensor, and the planar inductor, which is 3mm 2, is comparable to the presently researched implantable chip size. The measured inductance of the gold electroplated inductor is 0.371μH. The capacitance changes from 0.934 pF to 0.997pF with frequency shift of 248MHz to 256 MHz. The sensitivity of the sensor is found to be 0.21 fF/mmHg or 27.462 kHz/mmHg with an average non-linearity of 0.23216%.

Hybrid clone cells derived from human breast epithelial cells and human breast cancer cells exhibit properties of cancer stem/initiating cells.

PubMed

Gauck, Daria; Keil, Silvia; Niggemann, Bernd; Zänker, Kurt S; Dittmar, Thomas

2017-08-02

The biological phenomenon of cell fusion has been associated with cancer progression since it was determined that normal cell × tumor cell fusion-derived hybrid cells could exhibit novel properties, such as enhanced metastatogenic capacity or increased drug resistance, and even as a mechanism that could give rise to cancer stem/initiating cells (CS/ICs). CS/ICs have been proposed as cancer cells that exhibit stem cell properties, including the ability to (re)initiate tumor growth. Five M13HS hybrid clone cells, which originated from spontaneous cell fusion events between M13SV1-EGFP-Neo human breast epithelial cells and HS578T-Hyg human breast cancer cells, and their parental cells were analyzed for expression of stemness and EMT-related marker proteins by Western blot analysis and confocal laser scanning microscopy. The frequency of ALDH1-positive cells was determined by flow cytometry using AldeRed fluorescent dye. Concurrently, the cells' colony forming capabilities as well as the cells' abilities to form mammospheres were investigated. The migratory activity of the cells was analyzed using a 3D collagen matrix migration assay. M13HS hybrid clone cells co-expressed SOX9, SLUG, CK8 and CK14, which were differently expressed in parental cells. A variation in the ALDH1-positive putative stem cell population was observed among the five hybrids ranging from 1.44% (M13HS-7) to 13.68% (M13HS-2). In comparison to the parental cells, all five hybrid clone cells possessed increased but also unique colony formation and mammosphere formation capabilities. M13HS-4 hybrid clone cells exhibited the highest colony formation capacity and second highest mammosphere formation capacity of all hybrids, whereby the mean diameter of the mammospheres was comparable to the parental cells. In contrast, the largest mammospheres originated from the M13HS-2 hybrid clone cells, whereas these cells' mammosphere formation capacity was comparable to the parental breast cancer cells. All M13HS hybrid clones exhibited a mesenchymal phenotype and, with the exception of one hybrid clone, responded to EGF with an increased migratory activity. Fusion of human breast epithelial cells and human breast cancer cells can give rise to hybrid clone cells that possess certain CS/IC properties, suggesting that cell fusion might be a mechanism underlying how tumor cells exhibiting a CS/IC phenotype could originate.

Pathogenicity of fowl adenovirus in specific pathogen free chicken embryos.

PubMed

Alemnesh, W; Hair-Bejo, M; Aini, I; Omar, A R

2012-01-01

Inclusion body hepatitis (IBH) associated with fowl adenovirus (FAdV) infection has a worldwide distribution. The aim of the present study was to determine the pathogenicity of Malaysian FAdV serotype 9 (UPM04217) in specific pathogen free (SPF) embryonated chicken embryos. FAdV (titre 10(5.8)/ml) was inoculated into SPF embryonated chicken eggs (0.1 ml per egg) via the chorioallantoic membrane (CAM). There was 100% embryo mortality within 4-11 days post infection (dpi). The gross and microscopical lesions of the embryo were confined to the liver and were noted at 5, 7, 9 and 11 dpi. The liver was pale with multifocal areas of necrosis, fibrosis and haemorrhage. Microscopically, there was moderate to severe congestion and haemorrhage and severe and diffuse hepatocyte degeneration and necrosis, with intranuclear inclusion bodies (INIBs) and associated inflammation. Haemorrhage, congestion, degeneration, necrosis and hyperplasia of the CAM with INIBs were observed at 5, 7, 9 and 11 dpi. Varying degrees of congestion, haemorrhage, degeneration and necrosis were also observed in the yolk sac, kidney, spleen, heart and bursa of Fabricius. Ultrastructurally, numerous viral particles in the nucleus of hepatocytes were recorded at 7, 9 and 11 dpi, whereas at 5 dpi, fine granular and filamentous INIBs were observed. The INIBs in the CAM were present either as fine granular filamentous structures or as large viral inclusions. FAdV (UPM04217) is therefore highly pathogenic to SPF chicken embryos and the embryonic liver should be used for isolation and propagation of the virus. Copyright © 2011 Elsevier Ltd. All rights reserved.

Salt weathering in Egyptian limestone after laboratory simulations with continuous flow of salt solutions at different temperatures

NASA Astrophysics Data System (ADS)

Aly, Nevin; Gomez-Heras, Miguel; Hamed, Ayman; Alvarez de Buergo, Monica

2013-04-01

weathering in Egyptian limestone after laboratory simulations with continuous flow of salt solutions at different temperatures Nevin Aly Mohamed (1), Miguel Gomez - Heras(2), Ayman Hamed Ahmed (1), and Monica Alvarez de Buergo(2). (1) Faculty of Pet. & Min. Engineering- Suez Canal University, Suez, Egypt, (2) Instituto de Geociencias (CSIC-UCM) Madrid. Spain. Limestone is one of the most frequent building stones in Egypt and is used since the time of ancient Egyptians and salt weathering is one of the main threats to its conservation. Most of the limestone used in historical monuments in Cairo is a biomicrite extracted from the Mid-Eocene Mokattam Group. During this work, cylindrical samples (2.4 cm diameter and approx. 4.8 cm length) were subjected, in a purpose-made simulation chamber, to simulated laboratory weathering tests with fixed salt concentration (10% weight NaCl solution), at different temperatures, which were kept constant throughout each test (10, 20, 30, 40 oC). During each test, salt solutions flowed continuously imbibing samples by capilarity. Humidity within the simulation chamber was reduced using silica gel to keep it low and constant to increase evaporation rate. Temperature, humidity inside the simulation chamber and samples weight were digitally monitored during each test. Results show the advantages of the proposed experimental methodology using a continuous flow of salt solutions and shed light on the effect of temperature on the dynamics of salt crystallization on and within samples. Research funded by mission sector of high education ministry, Egypt and Geomateriales S2009/MAT-1629.

An extremely high stability cooling system for planet hunter

NASA Astrophysics Data System (ADS)

l'Allemand, J. L. Lizon a.; Becerril, S.; Mirabet, E.

2017-12-01

The detection of exoplanets is done by measuring very tiny periodical variations of the radial velocity of the parent star. Extremely stable spectrographs are required in order to enhance the wavelength variations of the spectral lines due to Doppler effect. CARMENES is the new high-resolution, high-stability spectrograph built for the 3.5 m telescope at the Calar Alto Observatory (CAHA, Almería, Spain) by a consortium formed by German and Spanish institutions. This instrument is composed of two separated spectrographs: VIS channel (550-1050 nm) and NIR channel (950-1700 nm). The NIR-channel spectrograph’s has been built under the responsibility of the Instituto de Astrofísica de Andalucía (IAA-CSIC). It has been manufactured, assembled, integrated and verified in the last two years, delivered in fall 2015 and commissioned in December 2015. Beside the various opto-mechanical challenges, the cooling system was one of the most demanding sub-systems of the NIR channel. Due to the highly demanding requirements applicable in terms of stability, this system arises as one of the core systems to provide outstanding stability to the channel at an operating temperature finally fixed at 140 K. Really at the edge of the state-of-the-art, the Cooling System is able to provide to the cold mass (˜1 Ton) better thermal stability than few hundredths of a degree over 24 hours (goal: 0.01K/day). The present paper describes the main technical approach, which has been taken in order to reach this very ambitious performance.

78 FR 38949 - Computer Security Incident Coordination (CSIC): Providing Timely Cyber Incident Response

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... information as part of the research needed to write a NIST Special Publication (SP) to help Computer Security.... The NIST SP will identify technical standards, methodologies, procedures, and processes that facilitate prompt and effective response. This RFI requests information regarding technical best practices...

82 FR 38764 - Wassenaar Arrangement 2016 Plenary Agreements Implementation

Federal Register 2010, 2011, 2012, 2013, 2014

2017-08-15

... `ceramic-``matrix'',' so as to control carbon fiber reinforced SiC matrix composites (C-SiC). These... Machines and Tow/Fiber Placement machines were accurately delineated at 1 inch, which is used in industry... manufacturing process. The formerly used phrase ``incorporating particles, whiskers or fibers'' did not...

Evaluation of asphalt rubber membrane interlayer (ARMI) using the University of Florida's composite system interface cracking (CSIC) test [summary].

DOT National Transportation Integrated Search

2012-01-01

Since the late 1970s, FDOT : has applied an interlayer : of Asphalt Rubber : Membrane Interlayer : (ARMI) to asphalt roadway : surfaces. ARMI layers are : constructed by spraying : asphalt rubber binder onto : the asphalt, covering the : layer with n...

Novel multi-functional europium-doped gadolinium oxide nanoparticle aerosols facilitate the study of deposition in the developing rat lung

NASA Astrophysics Data System (ADS)

Das, Gautom K.; Anderson, Donald S.; Wallis, Chris D.; Carratt, Sarah A.; Kennedy, Ian M.; van Winkle, Laura S.

2016-06-01

Ambient ultrafine particulate matter (UPM), less than 100 nm in size, has been linked to the development and exacerbation of pulmonary diseases. Age differences in susceptibility to UPM may be due to a difference in delivered dose as well as age-dependent differences in lung biology and clearance. In this study, we developed and characterized aerosol exposures to novel metal oxide nanoparticles containing lanthanides to study particle deposition in the developing postnatal rat lung. Neonatal, juvenile and adult rats (1, 3 and 12 weeks old) were nose only exposed to 380 μg m-3 of ~30 nm europium doped gadolinium oxide nanoparticles (Gd2O3:Eu3+) for 1 h. The deposited dose in the nose, extrapulmonary airways and lungs was determined using inductively-coupled plasma mass spectroscopy. The dose of deposited particles was significantly greater in the juvenile rats at 2.22 ng per g body weight compared to 1.47 ng per g and 0.097 ng per g for the adult and neonate rats, respectively. Toxicity was investigated in bronchoalveolar lavage fluid (BALF) by quantifying recovered cell types, and measuring lactate dehydrogenase activity and total protein. The toxicity data suggests that the lanthanide particles were not acutely toxic or inflammatory with no increase in neutrophils or lactate dehydrogenase activity at any age. Juvenile and adult rats had the same mass of deposited NPs per gram of lung tissue, while neonatal rats had significantly less NPs deposited per gram of lung tissue. The current study demonstrates the utility of novel lanthanide-based nanoparticles to study inhaled particle deposition in vivo and has important implications for nanoparticles delivery to the developing lung either as therapies or as a portion of particulate matter air pollution.Ambient ultrafine particulate matter (UPM), less than 100 nm in size, has been linked to the development and exacerbation of pulmonary diseases. Age differences in susceptibility to UPM may be due to a difference in delivered dose as well as age-dependent differences in lung biology and clearance. In this study, we developed and characterized aerosol exposures to novel metal oxide nanoparticles containing lanthanides to study particle deposition in the developing postnatal rat lung. Neonatal, juvenile and adult rats (1, 3 and 12 weeks old) were nose only exposed to 380 μg m-3 of ~30 nm europium doped gadolinium oxide nanoparticles (Gd2O3:Eu3+) for 1 h. The deposited dose in the nose, extrapulmonary airways and lungs was determined using inductively-coupled plasma mass spectroscopy. The dose of deposited particles was significantly greater in the juvenile rats at 2.22 ng per g body weight compared to 1.47 ng per g and 0.097 ng per g for the adult and neonate rats, respectively. Toxicity was investigated in bronchoalveolar lavage fluid (BALF) by quantifying recovered cell types, and measuring lactate dehydrogenase activity and total protein. The toxicity data suggests that the lanthanide particles were not acutely toxic or inflammatory with no increase in neutrophils or lactate dehydrogenase activity at any age. Juvenile and adult rats had the same mass of deposited NPs per gram of lung tissue, while neonatal rats had significantly less NPs deposited per gram of lung tissue. The current study demonstrates the utility of novel lanthanide-based nanoparticles to study inhaled particle deposition in vivo and has important implications for nanoparticles delivery to the developing lung either as therapies or as a portion of particulate matter air pollution. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr00897f

GUMNET - A new long-term monitoring initiative in the Guadarrama Mountains, Madrid, Spain

NASA Astrophysics Data System (ADS)

Rath, Volker; Fidel González Rouco, J.; Yagüe Anguis, Carlos

2014-05-01

We are announcing a new monitoring network in the Guadarrama Mountains north of Madrid, which is planned to be operational in early 2015. This network integrates atmospheric measurements as well as subsurface observations. It aims at improving the characterization of atmosphere-ground interactions in mountainous terrain, the hydrometeorology of the region, climatic change, and related research lines. It will also provide the meteorological and climate data which form the necessary background information for biological, agricultural and hydrological investigations in this area. Currently, the initiative is supported by research groups from the Complutense and Polytechnical Universities of Madrid (UCM and UPM), the Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), the Spanish National Meteorological Agency (AEMET), and finally the Parque Nacional de la Sierra de Guadarrama (PNSG). This infrastructure forms part of the Campus of Excellence Moncloa, and is supposed to become a focus of local as well as of international research. However, it is not associated with a particular project: data will in principle be available to the scientific and public communities. Also, the integration of new instruments (long or short term) will be welcome. The starting setup is as following: A group of WMO-compatible meteorological station in the central area of the massif will be installed, which include also a subsurface component of boreholes (≡20 m depth), where temperature and moisture will be measured. This core group is complemented by a reference site near El Escorial (including a fixed and a mobile tower for micrometeorological investigations). This setup is embedded in a network of meteorological stations run partly by AEMET and partly by the PNSG, which will provide the information necessary for the characterization of regional meteorology and climate. Finally, part of the data will be made available quasi-online on a central web server in Madrid. (temporary web page: http://tifon.fis.ucm.es/~gumnet/)

Spatial variability of NDVI at different seasons in the Community of Madrid (Spain)

NASA Astrophysics Data System (ADS)

Sotoca, Juan J. Martin; Saa-Requejo, Antonio; Borondo, Javier; Tarquis, Ana M.

2015-04-01

Agricultural drought quantification is one of the most important tasks in the characterization process of this natural hazard and its implications in crop insurance. Recently, several vegetation indexes based on remote-sensing data (VI) has been applied to quantify it (Dalezios et al, 2012). VIs are obtained combining several frequency bands that represent the relationship between photosynthesis and absorbed/reflected radiation. The most widely used VI is the Normalized Difference Vegetation Index (NDVI). It is based on the principle that healthy vegetation mainly absorbs visible light and reflects the near-infrared frequency band. Drought can be highly localized, and several authors have recognized the critical role of soil moisture and its spatial variability in agricultural losses (Anderson et al., 2011). Therefore, it is important to delimit locations within a homogeneous area that will share main NDVI statistics and in which the same threshold value can be applied to define drought event. In order to do so, we have applied for the first time in this context the method of singularity maps (Cheng and Agterberg, 1996) commonly used in localization of mineral deposits. The NDVI singularity maps calculated in each season through 2011/2012 are showed and discussed (Martín-Sotoca, 2014). References Anderson, M:C:, C. R. Hain, B. Wardlow, J. R. Mecikalski and W. P. Kustas (2011) Evaluation of drought indices based on thermal remote sensing of evapotranspiration over the continental United States. J. Climate, 24, 2025-2044. Dalezios, N.R., A. Blanta, N.V. Spyropoulos and A.M. Tarquis (2012) Risk identification of agricultural drought for sustainable Agroecosystems. Nat. Hazards Earth Syst. Sci., 14, 2435-2448. Cheng, Q. and F.P. Agterberg (1996) Multifractal modeling and spatial statistics. Math. Geol., 28, 1-16. Martín-Sotoca, J.J. (2014) Estructura Espacial de la Sequía en Pastos y sus Aplicaciones en el Seguro Agrario. Master Thesis, UPM (In Spanish). Acknowledgements First author acknowledges the Research Grant obtained from CEIGRAM in 2014

Scaling of the velocity fluctuations in turbulent channels up to Reτ=2003

NASA Astrophysics Data System (ADS)

Hoyas, Sergio; Jiménez, Javier

2006-01-01

A new numerical simulation of a turbulent channel in a large box at Reτ=2003 is described and briefly compared with simulations at lower Reynolds numbers and with experiments. Some of the fluctuation intensities, especially the streamwise velocity, do not scale well in wall units, both near and away from the wall. Spectral analysis traces the near-wall scaling failure to the interaction of the logarithmic layer with the wall. The present statistics can be downloaded from http://torroja.dmt.upm.es/ftp/channels. Further ones will be added to the site as they become available.

Microstructures and Properties of the C/Zr-O-Si-C Composites Fabricated by Polymer Infiltration and Pyrolysis

NASA Astrophysics Data System (ADS)

Ma, Yan; Chen, Zhaohui

2013-09-01

A way to improve the ablation properties of the C/SiC composites in an oxyacetylene torch environment was investigated by the precursor infiltration and pyrolysis route using three organic precursors (zirconium butoxide, polycarbosilane, and divinylbenzene). The ceramic matrix derived from the precursors at 1200 °C was mainly a mixture of SiC, ZrO2, and C. After annealing at 1600 °C for 1 h, ZrO2 partly transformed to ZrC because of the carbothermic reductions and completely transformed to ZrC at 1800 °C in 1 h. The mechanical properties of the composites decreased with increasing temperature, while the ablation resistance increased due to the increasing content of ZrC. Compared with C/SiC composites, the ablation resistance of the C/Zr-O-Si-C composites overwhelms because of the oxide films which formed on the ablation surfaces. And, the films were composed of two layers: the porous surface layer (the mixture of ZrO2 and SiO2) and the dense underlayer (SiO2).

Ab initio study of point defects near stacking faults in 3C-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xi, Jianqi; Liu, Bin; Zhang, Yanwen

Interactions between point defects and stacking faults in 3C-SiC are studied using an ab initio method based on density functional theory. The results show that the discontinuity of the stacking sequence considerably affects the configurations and behavior of intrinsic defects, especially in the case of silicon interstitials. The existence of an intrinsic stacking fault (missing a C-Si bilayer) shortens the distance between the tetrahedral-center site and its second-nearest-neighboring silicon layer, making the tetrahedral silicon interstitial unstable. Instead of a tetrahedral configuration with four C neighbors, a pyramid-like interstitial structure with a defect state within the band gap becomes a stablemore » configuration. In addition, orientation rotation occurs in the split interstitials that has diverse effects on the energy landscape of silicon and carbon split interstitials in the stacking fault region. Moreover, our analyses of ionic relaxation and electronic structure of vacancies show that the built-in strain field, owing to the existence of the stacking fault, makes the local environment around vacancies more complex than that in the bulk.« less

Ab initio study of point defects near stacking faults in 3C-SiC

DOE PAGES

Xi, Jianqi; Liu, Bin; Zhang, Yanwen; ...

2016-07-02

Interactions between point defects and stacking faults in 3C-SiC are studied using an ab initio method based on density functional theory. The results show that the discontinuity of the stacking sequence considerably affects the configurations and behavior of intrinsic defects, especially in the case of silicon interstitials. The existence of an intrinsic stacking fault (missing a C-Si bilayer) shortens the distance between the tetrahedral-center site and its second-nearest-neighboring silicon layer, making the tetrahedral silicon interstitial unstable. Instead of a tetrahedral configuration with four C neighbors, a pyramid-like interstitial structure with a defect state within the band gap becomes a stablemore » configuration. In addition, orientation rotation occurs in the split interstitials that has diverse effects on the energy landscape of silicon and carbon split interstitials in the stacking fault region. Moreover, our analyses of ionic relaxation and electronic structure of vacancies show that the built-in strain field, owing to the existence of the stacking fault, makes the local environment around vacancies more complex than that in the bulk.« less

Integrated Thermal Protection Systems and Heat Resistant Structures

NASA Technical Reports Server (NTRS)

Pichon, Thierry; Lacoste, Marc; Barreteau, R.; Glass, David E.

2006-01-01

In the early stages of NASA's Exploration Initiative, Snecma Propulsion Solide was funded under the Exploration Systems Research & Technology program to develop a CMC heatshield, a deployable decelerator, and an ablative heat shield for reentry vehicles. Due to changes within NASA's Exploration Initiative, this task was cancelled in early FY06. This paper will give an overview of the work that was accomplished prior to cancellation. The Snecma team consisted of MT Aerospace, Germany, and Materials Research & Design (MR&D), NASA Langley, NASA Dryden, and NASA Ames in the United States. An Apollo-type capsule was chosen as the reference vehicle for the work. NASA Langley generated the trajectory and aerothermal loads. Snecma and MT Aerospace began the design of a ceramic aft heatshield (CAS) utilizing C/SiC panels as the capsule heatshield. MR&D led the design of a C/SiC deployable decelerator, NASA Ames led the characterization of several ablators, NASA Dryden led the development of a heath management system and the high temperature structures testing, and NASA Langley led the insulation characterization. Though the task was pre-maturely cancelled, a significant quantity of work was accomplished.

Isolated Spin Qubits in SiC with a High-Fidelity Infrared Spin-to-Photon Interface

NASA Astrophysics Data System (ADS)

Christle, David J.; Klimov, Paul V.; de las Casas, Charles F.; Szász, Krisztián; Ivády, Viktor; Jokubavicius, Valdas; Ul Hassan, Jawad; Syväjärvi, Mikael; Koehl, William F.; Ohshima, Takeshi; Son, Nguyen T.; Janzén, Erik; Gali, Ádám; Awschalom, David D.

2017-04-01

The divacancies in SiC are a family of paramagnetic defects that show promise for quantum communication technologies due to their long-lived electron spin coherence and their optical addressability at near-telecom wavelengths. Nonetheless, a high-fidelity spin-photon interface, which is a crucial prerequisite for such technologies, has not yet been demonstrated. Here, we demonstrate that such an interface exists in isolated divacancies in epitaxial films of 3C-SiC and 4H-SiC. Our data show that divacancies in 4H-SiC have minimal undesirable spin mixing, and that the optical linewidths in our current sample are already similar to those of recent remote entanglement demonstrations in other systems. Moreover, we find that 3C-SiC divacancies have a millisecond Hahn-echo spin coherence time, which is among the longest measured in a naturally isotopic solid. The presence of defects with these properties in a commercial semiconductor that can be heteroepitaxially grown as a thin film on Si shows promise for future quantum networks based on SiC defects.

A Model for the Oxidation of Carbon Silicon Carbide Composite Structures

NASA Technical Reports Server (NTRS)

Sullivan, Roy M.

2004-01-01

A mathematical theory and an accompanying numerical scheme have been developed for predicting the oxidation behavior of carbon silicon carbide (C/SiC) composite structures. The theory is derived from the mechanics of the flow of ideal gases through a porous solid. The result of the theoretical formulation is a set of two coupled nonlinear differential equations written in terms of the oxidant and oxide partial pressures. The differential equations are solved simultaneously to obtain the partial vapor pressures of the oxidant and oxides as a function of the spatial location and time. The local rate of carbon oxidation is determined using the map of the local oxidant partial vapor pressure along with the Arrhenius rate equation. The nonlinear differential equations are cast into matrix equations by applying the Bubnov-Galerkin weighted residual method, allowing for the solution of the differential equations numerically. The numerical method is demonstrated by utilizing the method to model the carbon oxidation and weight loss behavior of C/SiC specimens during thermogravimetric experiments. The numerical method is used to study the physics of carbon oxidation in carbon silicon carbide composites.

Theoretical investigation of the breakdown electric field of SiC polymorphs

NASA Astrophysics Data System (ADS)

Yamaguchi, Kikou; Kobayashi, Daisuke; Yamamoto, Tomoyuki; Hirose, Kazuyuki

2018-03-01

The breakdown electric field of several SiC polymorphs has been investigated theoretically using a concept of "recovery rate," which is obtained by first principles calculations. A good relationship between the experimental breakdown electric fields and the calculated recovery rate of 4H-, 6H-, and 3C-SiC was obtained. In order to examine the stability of SiC polymorphs, the total electronic energies of various types of SiC crystal structures were calculated. Here, two candidates of polymorphs-GeS-type- and 2H-SiC-with energies comparable to those of experimentally well-established structures, have been obtained. The breakdown electric fields of these two polymorphs were estimated using a relationship obtained from the results of 4H-, 6H-, and 3C-SiC. This indicates that one of these polymorphs, GeS-type-SiC, has higher breakdown electric field than any other SiC polymorphs. In addition to the investigation with the recovery rate, relationship between experimental breakdown electric field and calculated band gap with recently developed accurate electron-correlation potential has been also discussed.

Electron transport in nanocrystalline SiC films obtained by direct ion deposition

NASA Astrophysics Data System (ADS)

Kozlovskyi, A.; Semenov, A.; Skorik, S.

2016-12-01

Electrical conductivity of nanocrystalline SiC films obtained by direct ion deposition was investigated within the temperature interval from 2 to 770 K. It were investigated the samples of films with 3С-SiC polytype structure and the heteropolytype films formed by layers of different polytypes SiC (3C-SiC/21R-SiC, 21R-SiC/27R-SiC, 3C-SiC/15R-SiC). The films had n-type conductivity that ensured a small excess of silicon ions. The thermally activated character of electron transport in the 3С-SiC polytype films was established. In the heteropolytype films the temperature dependence of the electrical resistance was described by the relation R(T) = R0 × exp[-kT/E0]. It was shown that the charge transport mechanism in the heteropolytype samples is electron tunneling through potential barriers formed by the conduction band offset in the contact region of the heterojunction. Tunnel charge transport occurs due to the presence of discrete energy states in the forbidden band caused the dimensional quantization.

Novel multi-functional europium-doped gadolinium oxide nanoparticle aerosols facilitate the study of deposition in the developing rat lung.

PubMed

Das, Gautom K; Anderson, Donald S; Wallis, Chris D; Carratt, Sarah A; Kennedy, Ian M; Van Winkle, Laura S

2016-06-02

Ambient ultrafine particulate matter (UPM), less than 100 nm in size, has been linked to the development and exacerbation of pulmonary diseases. Age differences in susceptibility to UPM may be due to a difference in delivered dose as well as age-dependent differences in lung biology and clearance. In this study, we developed and characterized aerosol exposures to novel metal oxide nanoparticles containing lanthanides to study particle deposition in the developing postnatal rat lung. Neonatal, juvenile and adult rats (1, 3 and 12 weeks old) were nose only exposed to 380 μg m(-3) of ∼30 nm europium doped gadolinium oxide nanoparticles (Gd2O3:Eu(3+)) for 1 h. The deposited dose in the nose, extrapulmonary airways and lungs was determined using inductively-coupled plasma mass spectroscopy. The dose of deposited particles was significantly greater in the juvenile rats at 2.22 ng per g body weight compared to 1.47 ng per g and 0.097 ng per g for the adult and neonate rats, respectively. Toxicity was investigated in bronchoalveolar lavage fluid (BALF) by quantifying recovered cell types, and measuring lactate dehydrogenase activity and total protein. The toxicity data suggests that the lanthanide particles were not acutely toxic or inflammatory with no increase in neutrophils or lactate dehydrogenase activity at any age. Juvenile and adult rats had the same mass of deposited NPs per gram of lung tissue, while neonatal rats had significantly less NPs deposited per gram of lung tissue. The current study demonstrates the utility of novel lanthanide-based nanoparticles to study inhaled particle deposition in vivo and has important implications for nanoparticles delivery to the developing lung either as therapies or as a portion of particulate matter air pollution.

Student Mentors' benefits in the Higher European Education: Academic Orientation

NASA Astrophysics Data System (ADS)

Medina-Rojas, S.; Gónzlez-Tirados, R. M.; Sánchez, M. E.; Paz-Ferreiro, J.; Saa-Requejo, A.; Gascó, G.; Moratiel, R.; Fabregat, J.; Antón, J. M.; Andina, D.; Tarquis, A. M.

2012-04-01

For several years the Spanish University has been experiencing changes that affect not only the educational area but also innovation and investigation in the classroom. In this sense, we carried out a first step in a senior student mentor project in order to facilitate adaptation of the new students, providing information, advice and guidance on different academic and social aspects. Here, we understand mentoring (including e-mentoring) as a relationship between a more senior student (mentor) and a few junior lesser experienced students (mentees). Mentoring is intended to develop and grow the skills, knowledge, confidence, and cultural understanding of the mentees aiming to help them succeed. Consequently, this work arises from our concern about studentś need. A test has been designed to assess studentś interest in the three fundamental aspects of mentoring: academic, social and administrative orientation. The test involved 16 questions related to these three different aspects on mentoring, evaluating each question from 1 (none) to 4 (totally). Surveys have been conducted on this topic at the Universidad Politécnica de Madrid (UPM) with students on different levels and modules of degrees in Agricultural Engineering. The same activity has been applied to the new degrees that have started last course (2010-11) in the Bologna Plan's requirements and will replace the precedents progressively. We have analyzed the answers considering sex, age, course and attitude to participate in the mentoring project. Several discussions are presented based on these results. Acknowledgements Funding provided by CEIGRAM (Research Centre for the Management of Agricultural and Environmental Risks) and Universidad Politécnica de Madrid (UPM) through Educational Innovation Project is greatly appreciated. Educational Innovation Project: "Training of senior students as mentors in different subjects of undergraduate and graduate degrees at ETSI Agrónomos"

Chemistry teaching in the new degrees of Agricultural Engineering

NASA Astrophysics Data System (ADS)

Arce, Augusto; Tarquis, Ana Maria; Castellanos, Maria Teresa; Requejo, Maria Isabel; Cartagena, Maria Carmen

2013-04-01

The academic year 2011-12 is the second one implementing Bologna process in ETSI at the subjects of Agricultural Chemistry I and Chemistry II in the new four Degrees: Graduate in Engineering and Agricultural Science, Food Engineering Graduate, Graduate Environmental and engineering Graduate in Biotechnology, for it has been necessary to design and implement new interactive methodologies in the teaching-learning process based on the use of the virtual platform of the UPM, implement new evaluation systems that promote continued participation active student and the development of educational materials to support the subjects of chemistry designed new degrees within the EEES. In addition to the above actions, an assessment test prior chemistry knowledge has been made to all students who enter into Agricultural Grades, improving laboratory practices and the comparative study of academic obtained by the students of the new grades in the subjects of chemistry during the year 2011-12 compared to the 2010-11 academic year. More than 15,000 data have showed a good correlation between the student's prior knowledge, the level test performed, test scores, the overall success rate of the course and the abandonment of the different degrees. Academic results show a higher percentage of students enrolled and presented on a greater number of passes on students enrolled in the 2011-12 academic year for students enrolled in the previous academic year. The improved results have influenced the actions taken and the level of knowledge with students entering. Finally, we propose possible solutions to fix these results in future courses, aiming to improve the degree of efficiency, success and significant absenteeism in the first year as it will condition the dropout rate of these new degrees. Acknowledgements: Proyecto de Innovación Educativa N° IE02054-11/12 UPM. 2012.

Coordinated EDX and micro-Raman analysis of presolar silicon carbide: A novel, nondestructive method to identify rare subgroup SiC

NASA Astrophysics Data System (ADS)

Liu, Nan; Steele, Andrew; Nittler, Larry R.; Stroud, Rhonda M.; De Gregorio, Bradley T.; Alexander, Conel M. O'D.; Wang, Jianhua

2017-12-01

We report the development of a novel method to nondestructively identify presolar silicon carbide (SiC) grains with high initial 26Al/27Al ratios (>0.01) and extreme 13C-enrichments (12C/13C ≤ 10) by backscattered electron-energy dispersive X-ray (EDX) and micro-Raman analyses. Our survey of a large number of presolar SiC demonstrates that (1) 80% of core-collapse supernova and putative nova SiC can be identified by quantitative EDX and Raman analyses with >70% confidence; (2) 90% of presolar SiC are predominantly 3C-SiC, as indicated by their Raman transverse optical (TO) peak position and width; (3) presolar 3C-SiC with 12C/13C ≤ 10 show lower Raman TO phonon frequencies compared to mainstream 3C-SiC. The downward shifted phonon frequencies of the 13C-enriched SiC with concomitant peak broadening are a natural consequence of isotope substitution. 13C-enriched SiC can therefore be identified by micro-Raman analysis; (4) larger shifts in the Raman TO peak position and width indicate deviations from the ideal 3C structure, including rare polytypes. Coordinated transmission electron microscopy analysis of one X and one mainstream SiC grain found them to be of 6H and 15R polytypes, respectively; (5) our correlated Raman and NanoSIMS study of mainstream SiC shows that high nitrogen content is a dominant factor in causing mainstream SiC Raman peak broadening without significant peak shifts; and (6) we found that the SiC condensation conditions in different stellar sites are astonishingly similar, except for X grains, which often condensed more rapidly and at higher atmospheric densities and temperatures, resulting in a higher fraction of grains with much downward shifted and broadened Raman TO peaks.

CINDOC, CSIC, and Spanish R and D

NASA Technical Reports Server (NTRS)

Delaviesca, Rosa

1994-01-01

The organizational structure and functional activities of the Spanish Center for Scientific Information and Documentation (CINDOC) are discussed. The library holds 8,500 journals, including all the Spanish scientific journals; 16,000 books and 20 CD-ROM data bases. CINDOC creates and distributes its own data bases that include all the articles published in Spanish scientific journals.

EDITORIAL: Proceedings of the 7th International LISA Symposium, Barcelona, Spain, 16-20 June 2008 Proceedings of the 7th International LISA Symposium, Barcelona, Spain, 16-20 June 2008

NASA Astrophysics Data System (ADS)

Lobo, Alberto; Sopuerta, Carlos F.

2009-05-01

In June 2006 the LISA International Science Team (LIST) accepted the bid presented by the Institut d'Estudis Espacials de Catalunya (IEEC) to host the 7th International LISA Symposium. This was during its 11th meeting at the University of Maryland, just before the 6th edition of the symposium started at NASA's Goddard Space Flight Center. The 7th International LISA Symposium took place in the city of Barcelona, Spain, 16-20 June, 2008, in the premises of CosmoCaixa, a modern science museum located in the hills near Tibidabo. Almost 240 delegates registered for the event, a record breaking figure compared to previous editions of the symposium. Many of the most renowned world experts in LISA, gravitational wave science, and astronomy, as well as engineers, attended LISA #7 and produced state of the art presentations, while everybody benefited from the opportunity to have live discussions during the week in a friendly environment. The programme included 31 invited plenary lectures in the mornings, and eight parallel sessions in the afternoons. These were classified into seven major areas of research: LISA Technology, LISA PathFinder, LISA PathFinder Data Analysis, LISA Data Analysis, Gravitational Wave Sources, Cosmology and Fundamental Physics with LISA and Other Gravitational Wave Detectors. Abstracts for 138 communications were received, from which a selection was made by the session convenors which would fit time constraints. Up to 63 posters completed the scientific programme. More details on the programme, including some of the talks, can be found at the symposium website:http://www.ice.cat/research/LISA_Symposium. There was, however, a remarkable add-on: Professor Clifford Will delivered a startling presentation to the general public, who completely filled the Auditori—the main conference room, 320 seats—and were invited to ask questions to the speaker who boldly guided them through the daunting world of Black Holes, Waves of Gravity, and other Warped Ideas of Dr Einstein. The Proceedings of the 7th International LISA Symposium are jointly published by the journal Classical and Quantum Gravity (CQG) and the Journal of Physics: Conference Series (JPCS). This formula has a precedent in the last Amaldi Conference (Sydney 2007), and was motivated by the impossibility to include all communications into a single CQG volume. Plenary speakers were invited to submit their contributions to CQG, as were a number of parallel session authors chosen by the session convenors and the Science Organising Committee (SOC). Authors of the other parallel session presentations and posters were invited to submit to JPCS. All papers have been peer-reviewed prior to being accepted for publication in either journal, and the whole set is a good representation of the talks we heard during the symposium. Thanks are accordingly due to all of the authors for their collaborative attitude and, more generally, to all of the delegates who came to Barcelona and made the symposium a first-class scientific event. The LISA community has been steadily growing since the symposium launched in Chilton, near Oxford (UK), back in 1996. The support of such community strongly endorses a complex mission project, whose short term future requires such support for a much longer term new era of gravitational wave astronomy and fundamental physics. In this sense, the number of attendees and their active interest in the LISA mission sparks optimism. The 7th International LISA Symposium sponsors are also sincerely acknowledged. They are: the Albert Einstein Institute (Hannover), the Spanish Ministry of Science and Innovation, the Generalitat de Catalunya (AGAUR), the Barcelona Institute of High Energy Physics (IFAE), the University of Barcelona (UB), the Polytechnique University of Catalunya (UPC), the Spanish Society of General Relativity and Gravitation (SEGRE), CosmoCaixa, NASA and the European Space Agency (ESA). The latter provided the LISA PathFinder model, a 1:4 scale model whose primer display we enjoyed during the symposium. Finally, the local organising committee (LOC) and the IEEC staff have given their enthusiastic support to the organization in every detail, and have worked efficiently for months to make the symposium happen. Many thanks to all of them, and congratulations. This is a co-publication with Journal of Physics Conference Series. A selection of papers are published in this issue of Classical and Quantum Gravity with the bulk of the papers, after peer review, published in Journal of Physics: Conference Series. Alberto Lobo and Carlos F Sopuerta Institut de Ciències de l'Espai (CSIC-IEEC) Guest Editors

Experimental Constraints on a Dark Matter Origin for the DAMA Annual Modulation Effect

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aalseth, Craig E.; Barbeau, Phil; Cerdeno, D. G.

2008-12-17

Abstract Follows: C. E. Aalseth,1 P. S. Barbeau,2 D. G. Cerdeño,3 J. Colaresi,4 J. I. Collar,2 P. de Lurgio,5 G. Drake,5 J. E. Fast,1 C. H. Greenberg,2 T. W. Hossbach,1 J. D. Kephart,1 M. G. Marino,7 H. S. Miley,1 J. L. Orrell,1 D. Reyna,6 R. G. H. Robertson,7 R. L. Talaga,5 O. Tench,4 T. D. Van Wechel,7 J. F. Wilkerson,7 and K. M. Yocum4 (CoGeNT Collaboration) 1Pacific Northwest National Laboratory, Richland, Washington 99352, USA 2Kavli Institute for Cosmological Physics and Enrico Fermi Institute, University of Chicago, Chicago, Illinois 60637, USA 3Departamento de Física Teórica C-XI & Instituto de Física Teóricamore » UAM-CSIC, Universidad Autónoma de Madrid, Cantoblanco, E-28049 Madrid, Spain 4CANBERRA Industries, Meriden, Connecticut 06450, USA 5Argonne National Laboratory, Argonne, Illinois 60439, USA 6Sandia National Laboratories, Livermore, California 94550, USA 7Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, Washington 98195, USA Received 7 July 2008; revised 6 August 2008; published 17 December 2008 A claim for evidence of dark matter interactions in the DAMA experiment has been recently reinforced. We employ a new type of germanium detector to conclusively rule out a standard isothermal galactic halo of weakly interacting massive particles as the explanation for the annual modulation effect leading to the claim. Bounds are similarly imposed on a suggestion that dark pseudoscalars might lead to the effect. We describe the sensitivity to light dark matter particles achievable with our device, in particular, to next-to-minimal supersymmetric model candidates.« less

Neural network model for the prediction of PM10 daily concentrations in two sites in the Western Mediterranean.

PubMed

de Gennaro, Gianluigi; Trizio, Livia; Di Gilio, Alessia; Pey, Jorge; Pérez, Noemi; Cusack, Michael; Alastuey, Andrés; Querol, Xavier

2013-10-01

An artificial neural network (ANN) was developed and tested to forecast PM10 daily concentration in two contrasted environments in NE Spain, a regional background site (Montseny), and an urban background site (Barcelona-CSIC), which was highly influenced by vehicular emissions. In order to predict 24-h average PM10 concentrations, the artificial neural network previously developed by Caselli et al. (2009) was improved by using hourly PM concentrations and deterministic factors such as a Saharan dust alert. In particular, the model input data for prediction were the hourly PM10 concentrations 1-day in advance, local meteorological data and information about air masses origin. The forecasted performance indexes for both sites were calculated and they showed better results for the regional background site in Montseny (R(2)=0.86, SI=0.75) than for urban site in Barcelona (R(2)=0.73, SI=0.58), influenced by local and sometimes unexpected sources. Moreover, a sensitivity analysis conducted to understand the importance of the different variables included among the input data, showed that local meteorology and air masses origin are key factors in the model forecasts. This result explains the reason for the improvement of ANN's forecasting performance at the Montseny site with respect to the Barcelona site. Moreover, the artificial neural network developed in this work could prove useful to predict PM10 concentrations, especially, at regional background sites such as those on the Mediterranean Basin which are primarily affected by long-range transports. Hence, the artificial neural network presented here could be a powerful tool for obtaining real time information on air quality status and could aid stakeholders in their development of cost-effective control strategies. © 2013 Elsevier B.V. All rights reserved.

Acoustic imaging of the Mediterranean water outflowing through the Strait of Gibraltar

NASA Astrophysics Data System (ADS)

Biescas Gorriz, Berta; Carniel, Sandro; Sallarès, Valentí; Rodriguez Ranero, Cesar

2016-04-01

Acoustic imaging of the Mediterranean water outflowing through the Strait of Gibraltar Berta Biescas (1), Sandro Carniel (2) , Valentí Sallarès (3) and Cesar R. Ranero(3) (1) Istituto di Scienze Marine, CNR, Bologna, Italy (2) Istituto di Scienze Marine, CNR, Venice, Italy (3) Institut de Ciències del Mar, CSIC, Barcelona, Spain Acoustic reflectivity acquired with multichannel seismic reflection (MCS) systems allow to detect and explore the thermohaline structure in the ocean with vertical and lateral resolutions in the order of 10 m, covering hundreds of kilometers in the lateral dimension and the full-depth water column. In this work we present a MCS 2D profile that crosses the Strait of Gibraltar, from the Alboran Sea to the internal Gulf of Cadiz (NE Atlantic Ocean). The MCS data was acquired during the Topomed-Gassis Cruise (European Science Foundation TopoEurope), which was carried out on board of the Spanish R/V Sarmiento de Gamboa in October 2011. The strong thermohaline contrast between the Mediterranean water and the Atlantic water, characterizes this area and allows to visualize, with unprecedented resolution, the acoustic reflectivity associated to the dense flow of the Mediterranean water outflowing through the prominent slope of the Strait of Gibraltar. During the first kilometers, the dense flow drops attached to the continental slope until it reaches the buoyancy depth at 700 m. Then, it detaches from the sea floor and continues flowing towards the Atlantic Ocean, occupying the layer at 700-1500 m deep and developing clear staircase layers. The reflectivity images display near seabed reflections that could well correspond to turbidity layers. The XBT data acquired coincident in time and space with the MCS data will help us in the interpretation and analysis of the acoustic data.

Characteristics of dune-paleosol-sequences in Fuerteventura. - What should be questioned?

NASA Astrophysics Data System (ADS)

Faust, Dominik; Willkommen, Tobias; Yanes, Yurena; Richter, David; Zöller, Ludwig

2013-04-01

Characteristics of dune-paleosol-sequences in Fuerteventura. - What should be questioned? Dominik Faust, TU Dresden, Germany Tobias Willkommen, TU Dresden, Germany Yurena Yanes, CSIC Granada/Cincinatti, Spain/USA David Richter, TU Dresden, Germany Ludwig Zöller, Uni Bayreuth, Germany The northern part of Fuerteventura is characterized by large dune fields. We investigated dune-paleosol-sequences in four pits to establish a robust stratigraphy and to propose a standard section. An interaction of processes like dune formation, soil formation and redeposition of soils and sand are most important to understand the principles of landscape development in the study area. To our mind a process cycle seem to be important: First climbing-dunes are formed by sand of shelf origin. Then soil formation could have taken place. Soil and/or sand were then eroded and deposited at toe slope position. This material in turn is the source of new sand supply and dune formation. The described cycle may be repeated several times and this ping-pong-process holds on. The results are sections composed of dune layers, paleosols and colluvial material interbedded. Fundamental questions still remain unanswered: Is climate change responsable for changes in process combination (e.g. from dune formation to soil formation)? Or are these features due to divergence phenomenon, where different effects/results (dune and soils) may be linked to similar causes (here: climate)? Assuming that different features (soils and dunes) were formed under one climate, increasing soil forming intensity could be mainly a function of decreasing sand supply. This in turn could be caused by reduced sand production (s. ZECH et al. accepted). However geochemical data and mollusc assemblages point to changing environments in space and even climate modifications in time.

The 2014 interferometric imaging beauty contest

NASA Astrophysics Data System (ADS)

Monnier, John D.; Berger, Jean-Philippe; Le Bouquin, Jean-Baptiste; Tuthill, Peter G.; Wittkowski, Markus; Grellmann, Rebekka; Müller, André; Renganswany, Sridhar; Hummel, Christian; Hofmann, Karl-Heinz; Schertl, Dieter; Weigelt, Gerd; Young, John; Buscher, David; Sanchez-Bermudez, Joel; Alberdi, Antxon; Schoedel, Rainer; Köhler, Rainer; Soulez, Ferréol; Thiébaut, Éric; Kluska, Jacques; Malbet, Fabien; Duvert, Gilles; Kraus, Stefan; Kloppenborg, Brian K.; Baron, Fabien; de Wit, Willem-Jan; Rivinius, Thomas; Merand, Antoine

2014-07-01

Here we present the results of the 6th biennial optical interferometry imaging beauty contest. Taking advantage of a unique opportunity, the red supergiant VY CMa and the Mira variable R Car were observed in the astronomical H-band with three 4-telescope configurations of the VLTI-AT array using the PIONIER instrument. The community was invited to participate in the subsequent image reconstruction and interpretation phases of the project. Ten groups submitted entries to the beauty contest, and we found reasonable consistency between images obtained from independent workers using quite different algorithms. We also found that significant differences existed between the submitted images, much greater than in past beauty contests that were all based on simulated data. A novel crowd-sourcing" method allowed consensus median images to be constructed, filtering likely artifacts and retaining real features." We definitively detect strong spots on the surfaces of both stars as well as distinct circumstellar shells of emission (likely water/CO) around R Car. In a close contest, Joel Sanchez (IAA-CSIC/Spain) was named the winner of the 2014 interferometric imaging beauty contest. This process has shown that new comers" can use publicly-available imaging software to interpret VLTI/PIONIER imaging data, as long as sufficient observations are taken to have complete uv coverage { a luxury that is often missing. We urge proposers to request adequate observing nights to collect sufficient data for imaging and for time allocation committees to recognise the importance of uv coverage for reliable interpretation of interferometric data. We believe that the result of the proposed broad international project will contribute to inspiring trust in the image reconstruction processes in optical interferometry.

The Spanish Fireball Network: Popularizing Interplanetary Matter

NASA Astrophysics Data System (ADS)

Trigo-Rodríguez, J. M.; Castro-Tirado, A.; Llorca, J.; Fabregat, J.

In order to increase in Spain the social interest in the study of interplanetary matter (asteroids, comets and meteoroids) we created the Spanish Photographic Meteor Network (SPMN) in 1997. This network has been dedicated to studying interplanetary matter with participation of researchers from three universities (Universitat Jaume I, Universitat de Barcelona and Universitat de València), the Institut d'Estudis Espacials de Catalunya (IEEC) and the Instituto de Astrofísica de Andalucía and it is also supported by the Atmospheric Sounding Station at El Arenosillo (INTA-CEDEA) and by the Experimental Station La Mayora (EELM-CSIC). In order to promote the participation of amateurs, our homepage (www.spmn.uji.es) presents public information about our research explains how amateur astronomers can participate in our network. In this paper we give some examples of the social role of a Fireball Network in order to give a coherent explanation to bright fireball events. Moreover, we also discuss the role of this kind of research project as a promoter of amateur participation and contribution to science. In fact, meteor astronomy can become an excellent area to form young researchers because systematic observation of meteors using photographic, video and CCD techniques has become one of the rare fields in astronomy in which amateurs can work together with professionals to make important contributions. We present here some results of the campaigns realized from the formation of the network. Finally, in a new step of development of our network, the all-sky CCD automatic cameras will be continuously detecting meteors and fireballs from four stations located in the Andalusia and Valencian communities by the end of 2005. Additionally, during important meteor showers we plan to develop fireball spectroscopy using medium field lenses.

Searching for tremor in seismic noise on the 84 OBS (Ocean Bottom Seismometers) and 40 Land Seismometers, 3 months deployment in the Lesser Antilles subduction

NASA Astrophysics Data System (ADS)

Becel, A.; Diaz, J.; Laigle, M.; L. A. S. T., T.

2008-12-01

THALES, L.A.S.T., stands for Lesser Antilles Subduction zone Team of the THALES WAS RIGHT project (Coord. A. Hirn) of the European Union FP6, which gathers the scientific teams of a cluster of surveys and cruises in 2007. This cluster comprises the German cruise TRAIL with the vessel F/S Merian (PI E. Flueh and H. Kopp, IFM-GEOMAR), the French cruise SISMANTILLES 2 with the IFREMER vessel N/O Atalante (PI M. Laigle, IPG Paris and JF. Lebrun, Univ. Antilles Guyane), and French cruise OBSANTILLES with the IRD vessel N/O Antea (PI P. Charvis, Geoazur, Nice, France). Presentation T53A-1109 at last year, 2007 AGU Fall Meeting, of THALES, L.A.S.T. summarized the goals and first results of these experiments dedicated specifically to image at depth the seismic structure and activity of this subduction zone segment, which comprised: - MCS, multi-channel reflection seismic profiles as well as coincident multi-beam bathymetry that have been collected for 3700 km along a grid comprising 300 km along strike from North of Guadeloupe to Martinique islands and extending 150 km offshore over the forearc and accretionary wedge. - 84 OBSs at the nodes of this grid of profiles and 40 land stations. These instruments recorded the marine shots for a coincident refraction survey. They recorded local seismicity for precise location and focal mechanisms. The recovery of the continuous recording at this dense and extensive set of temporary sensors (1), recently completed allows to initiate an analysis of the continuously recorded seismic noise. Changes and transients of the noise character, and their possible correlations among instruments in the array will be searched for in the view of checking evidence of possible seismic tremor episodes or seismic transients, as have been described elsewhere with the specific aspect that most observations were acquired at sea-bottom as the forearc extends here broadly offshore. Preliminary results will be documented. (1) During these cruises and surveys, 84 Ocean Bottom multi-components Seismometers (OBS) have been brought together from several pools (Geosciences Azur, INSU-IPGP, IFM-GEOMAR, AWI), with up to 40 land stations (CSIC Barcelona, IPG-Paris, INSU-RLBM and LITHOSCOPE), for 3 months in early 2007, with a lesser number of instruments for similar period before and after. Support for the surveys came principally by ANR Catastrophes Telluriques et Tsunamis (SUBSISMANTI) to IPGP, by the EU SALVADOR Programme of IFM-GEOMAR, the OBSISMER CPER project of IPGP, Région Martinique and EU-FEDER, as well as by the EU project THALES WAS RIGHT on the Antilles and Hellenic active subductions to which contribute IPG- Paris and Geosciences Azur (France), IFM-GEOMAR (Germany), ETH Zurich (Switzerland), CSIC Barcelona (Spain), Univ. Trieste (Italy) and NOA Athens (Greece).

Jose Maria Albareda (1902-1966) and the Formation of the Spanish Consejo Superior de Investigaciones Cientificas

ERIC Educational Resources Information Center

Malet, Antoni

2009-01-01

Jose Maria Albareda (1902-1966) was an applied chemist and a prominent member of the Roman Catholic organization, Opus Dei, who played a crucial role in organizing the Consejo Superior de Investigaciones Cientficas (CSIC), the new scientific institution created by the Franco regime in 1939. The paper analyses first the formative years in…

The stability of vacancy clusters and their effect on helium behaviors in 3C-SiC

NASA Astrophysics Data System (ADS)

Sun, Jingjing; Li, B. S.; You, Yu-Wei; Hou, Jie; Xu, Yichun; Liu, C. S.; Fang, Q. F.; Wang, Z. G.

2018-05-01

We have carried out systematical ab initio calculations to study the stability of vacancy clusters and their effect on helium behaviors in 3C-SiC. It is found that the formation energies of vacancy clusters containing only carbon vacancies are the lowest although the vacancies are not closest to each other, while the binding energies of vacancy clusters composed of both silicon and carbon vacancies in the closest neighbors to each other are the highest. Vacancy clusters can provide with free space for helium atoms to aggregate, while interstitial sites are not favorable for helium atoms to accumulate. The binding energies of vacancy clusters with helium atoms increase almost linearly with the ratio of helium to vacancy, n/m. The binding strength of vacancy cluster having the participation of the silicon vacancy with helium is relatively stronger than that without silicon vacancy. The vacancy clusters with more vacancies can trap helium atoms more tightly. With the presence of vacancy clusters in the material, the diffusivity of helium will be significantly reduced. Moreover, the three-dimension electron density is calculated to analyze the interplay of vacancy clusters with helium.

Synthesis of graphene and graphene nanostructures by ion implantation and pulsed laser annealing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Xiaotie; Rudawski, Nicholas G.; Appleton, Bill R.

2016-07-14

In this paper, we report a systematic study that shows how the numerous processing parameters associated with ion implantation (II) and pulsed laser annealing (PLA) can be manipulated to control the quantity and quality of graphene (G), few-layer graphene (FLG), and other carbon nanostructures selectively synthesized in crystalline SiC (c-SiC). Controlled implantations of Si{sup −} plus C{sup −} and Au{sup +} ions in c-SiC showed that both the thickness of the amorphous layer formed by ion damage and the doping effect of the implanted Au enhance the formation of G and FLG during PLA. The relative contributions of the amorphousmore » and doping effects were studied separately, and thermal simulation calculations were used to estimate surface temperatures and to help understand the phase changes occurring during PLA. In addition to the amorphous layer thickness and catalytic doping effects, other enhancement effects were found to depend on other ion species, the annealing environment, PLA fluence and number of pulses, and even laser frequency. Optimum II and PLA conditions are identified and possible mechanisms for selective synthesis of G, FLG, and carbon nanostructures are discussed.« less

Development of Design Analysis Methods for C/SiC Composite Structures

NASA Technical Reports Server (NTRS)

Sullivan, Roy M.; Mital, Subodh K.; Murthy, Pappu L. N.; Palko, Joseph L.; Cueno, Jacques C.; Koenig, John R.

2006-01-01

The stress-strain behavior at room temperature and at 1100 C (2000 F) was measured for two carbon-fiber-reinforced silicon carbide (C/SiC) composite materials: a two-dimensional plain-weave quasi-isotropic laminate and a three-dimensional angle-interlock woven composite. Micromechanics-based material models were developed for predicting the response properties of these two materials. The micromechanics based material models were calibrated by correlating the predicted material property values with the measured values. Four-point beam bending sub-element specimens were fabricated with these two fiber architectures and four-point bending tests were performed at room temperature and at 1100 C. Displacements and strains were measured at various locations along the beam and recorded as a function of load magnitude. The calibrated material models were used in concert with a nonlinear finite element solution to simulate the structural response of these two materials in the four-point beam bending tests. The structural response predicted by the nonlinear analysis method compares favorably with the measured response for both materials and for both test temperatures. Results show that the material models scale up fairly well from coupon to subcomponent level.

Life Limiting Behavior in Interlaminar Shear of Continuous Fiber-Reinforced Ceramic Matrix Composites at Elevated Temperatures

NASA Technical Reports Server (NTRS)

Choi, Sung R.; Calomino, Anthony M.; Bansal, Narottam P.; Verrilli, Michael J.

2006-01-01

Interlaminar shear strength of four different fiber-reinforced ceramic matrix composites was determined with doublenotch shear test specimens as a function of test rate at elevated temperatures ranging from 1100 to 1316 C in air. Life limiting behavior, represented as interlaminar shear strength degradation with decreasing test rate, was significant for 2-D crossplied SiC/MAS-5 and 2-D plain-woven C/SiC composites, but insignificant for 2-D plain-woven SiC/SiC and 2-D woven Sylramic (Dow Corning, Midland, Michigan) SiC/SiC composites. A phenomenological, power-law delayed failure model was proposed to account for and to quantify the rate dependency of interlaminar shear strength of the composites. Additional stress rupture testing in interlaminar shear was conducted at elevated temperatures to validate the proposed model. The model was in good agreement with SiC/MAS-5 and C/SiC composites, but in poor to reasonable agreement with Sylramic SiC/SiC. Constant shear stress-rate testing was proposed as a possible means of life prediction testing methodology for ceramic matrix composites subjected to interlaminar shear at elevated temperatures when short lifetimes are expected.

β-Dicalcium silicate-based cement: synthesis, characterization and in vitro bioactivity and biocompatibility studies.

PubMed

Correa, Daniel; Almirall, Amisel; García-Carrodeguas, Raúl; dos Santos, Luis Alberto; De Aza, Antonio H; Parra, Juan; Delgado, José Ángel

2014-10-01

β-dicalcium silicate (β-Ca₂ SiO₄, β-C₂ S) is one of the main constituents in Portland cement clinker and many refractory materials, itself is a hydraulic cement that reacts with water or aqueous solution at room/body temperature to form a hydrated phase (C-S-H), which provides mechanical strength to the end product. In the present investigation, β-C₂ S was synthesized by sol-gel process and it was used as powder to cement preparation, named CSiC. In vitro bioactivity and biocompatibility studies were assessed by soaking the cement samples in simulated body fluid solutions and human osteoblast cell cultures for various time periods, respectively. The results showed that the sol-gel process is an available synthesis method in order to obtain a pure powder of β-C₂ S at relatively low temperatures without chemical stabilizers. A bone-like apatite layer covered the material surface after soaking in SBF and its compressive strength (CSiC cement) was comparable with that of the human trabecular bone. The extracts of this cement were not cytotoxic and the cell growth and relative cell viability were comparable to negative control. © 2013 Wiley Periodicals, Inc.

B{sub 4}C-SiC reaction-sintered coatings on graphite plasma facing components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valentine, P.G.; Trester, P.W.; Winter, J.

1994-05-01

Boron carbide plus silicon carbide (B{sub 4}C-SiC) reaction-sintered coatings for use on graphite plasma-facing components were developed. Such coatings are of interest in TEXTOR tokamak limiter-plasma interactions as a means of reducing carbon erosion, of providing a preferred release of boron for oxygen gettering, and of investigating silicon`s effect on radiative edge phenomena. Specimens evaluated had (a) either Ringsdorfwerke EK 98 graphite or Le Carbon Lorraine felt-type AEROLOR A05 CFC substrates; (b) multiphase coatings, comprised of B{sub 4}C, Sic, and graphite; (c) nominal coating compositions of 69 wt.-% B{sub 4}C + 31 wt.-% SiC; and (d) nominal coating thicknesses betweenmore » 250 and 775 {mu}m. Coated coupons were evaluated by high heat flux experiments in the JUDITH (electron beam) test facility at KFA. Simulated disruptions, with energy densities up to 10 MJm{sup {minus}2}, and normal operation simulations, with power densities up to 12 MWm{sup {minus}2}, were conducted. The coatings remained adherent; at the highest levels tested, minor changes occurred, including localized remelting, modification of the crystallographic phases, occasional microcracking, and erosion.« less

A study of the region of massive star formation L379IRS1 in radio lines of methanol and other molecules

NASA Astrophysics Data System (ADS)

Kalenskii, S. V.; Shchurov, M. A.

2016-04-01

The results of spectral observations of the region of massive star formation L379IRS1 (IRAS18265-1517) are presented. The observations were carried out with the 30-m Pico Veleta radio telescope (Spain) at seven frequencies in the 1-mm, 2-mm, and 3-mm wavelength bands. Lines of 24 molecules were detected, from simple diatomic or triatomic species to complex eight- or nine-atom compounds such as CH3OCHO or CH3OCH3. Rotation diagrams constructed from methanol andmethyl cyanide lines were used to determine the temperature of the quiescent gas in this region, which is about 40-50 K. In addition to this warm gas, there is a hot component that is revealed through high-energy lines of methanol and methyl cyanide, molecular lines arising in hot regions, and the presence of H2O masers and Class II methanol masers at 6.7 GHz, which are also related to hot gas. One of the hot regions is probably a compact hot core, which is located near the southern submillimeter peak and is related to a group of methanol masers at 6.7 GHz. High-excitation lines at other positions may be associated with other hot cores or hot post-shock gas in the lobes of bipolar outflows. The rotation diagrams can be use to determine the column densities and abundances of methanol (10-9) and methyl cyanide (about 10-11) in the quiescent gas. The column densities of A- and E-methanol in L379IRS1 are essentually the same. The column densities of other observedmolecules were calculated assuming that the ratios of the molecular level abundances correspond to a temperature of 40 K. The molecular composition of the quiescent gas is close to that in another region of massive star formation, DR21(OH). The only appreciable difference is that the column density of SO2 in L379IRS1 is at least a factor of 20 lower than the value in DR21(OH). The SO2/CS and SO2/OCS abundance ratios, which can be used as chemical clocks, are lower in L379IRS1 than in DR21(OH), suggesting that L379IRS1 is probably younger than DR21(OH).

Moisès Broggi i Vallès (1908-2012): Military surgeon and Catalan humanitarian.

PubMed

Derby, Mark; Jorge, David

2016-02-01

Catalan surgeon Moisès Broggi entered medical practice in 1931 as Spain was modernizing rapidly. Five years later, however, an attempted military coup sparked a nationwide civil war. Broggi offered his services to the embattled Republic and joined the Medical Service of the International Brigades. He served alongside colleagues from many countries, helping to develop advances in military medicine and especially trauma surgery. Broggi chose to remain working in Barcelona as Franco's Nationalist forces entered the city, in spite of the risk of reprisal he faced as a former officer of the International Brigades. Although forced from his leading position in the public health service, he developed a distinguished private practice. In the year of Franco's death he became President of Barcelona's Royal Academy of Medicine and he received many other honours. Just months before his death at the remarkable age of 104, Dr Moisès Broggi continued to discuss and write about the concerns that had directed the course of his life--advances in medical science and the intellectual and political repression that had hindered delivery of those advances. In an article titled Exile and Silence he noted the groundbreaking work carried out under the auspices of the prestigious scientific institutions founded during Spain's Second Republic and the subsequent dark decades of exile suffered by many of their prominent scientists, some of them his close friends. © The Author(s) 2014.

Overview of an Advanced Hypersonic Structural Concept Test Program

NASA Technical Reports Server (NTRS)

Stephens, Craig A.; Hudson, Larry D.; Piazza, Anthony

2007-01-01

This viewgraph presentation provides an overview of hypersonics M&S advanced structural concepts development and experimental methods. The discussion on concepts development includes the background, task objectives, test plan, and current status of the C/SiC Ruddervator Subcomponent Test Article (RSTA). The discussion of experimental methods examines instrumentation needs, sensors of interest, and examples of ongoing efforts in the development of extreme environment sensors.

Molecular dynamics study of silicon carbide properties under external dynamic loading

NASA Astrophysics Data System (ADS)

Utkin, A. V.; Fomin, V. M.

2017-10-01

In this study, molecular dynamic simulations of high-velocity impact of a spherical 3C-SiC cluster, with a wide range of velocities (from 100 to 2600 m/s) and with a rigid wall, were performed. The analysis of the final structure shows that no structural phase transformation occurred in the material, despite the high pressure during the collision process.

Homoepitaxial and Heteroepitaxial Growth on Step-Free SiC Mesas

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Powell, J. Anthony

2004-01-01

This article describes the initial discovery and development of new approaches to SiC homoepitaxial and heteroepitaxial growth. These approaches are based upon the previously unanticipated ability to effectively supress two-dimensional nucleation of 3C-SiC on large basal plane terraces that form between growth steps when epitaxy is carried out on 4H- and 6H-SiC nearly on-axis substrates. After subdividing the growth surface into mesa regions, pure stepflow homoeptixay with no terrace nucleation was then used to grow all existing surface steps off the edges of screw-dislocation-free mesas, leaving behind perfectly on-axis (0001) basal plane mesa surfaces completely free of atomic-scale steps. Step-free mesa surfaces as large as 0.4 mm x 0.4 mm were experimentally realized, with the yield and size of step-free mesas being initally limited by substrate screw dislocations. Continued epitaxial growth following step-free surface formation leads to the formation of thin lateral cantilevers that extend the step-free surface area from the top edge of the mesa sidewalls. By selecting a proper pre-growth mesa shape and crystallographic orientation, the rate of cantilever growth can be greatly enhanced in a web growth process that has been used to (1) enlarge step-free surface areas and (2) overgrow and laterally relocate micropipes and screw dislocations. A new growth process, named step-free surface heteroepitaxy, has been developed to achieve 3C-SiC films on 4H- and 6H-SiC substrate mesas completely free of double positioning boundary and stacking fault defects. The process is based upon the controlled terrace nucleation and lateral expansion of a single island of 3C-SiC across a step-free mesa surface. Experimental results indicate that substrateepilayer lattice mismatch is at least partially relieved parallel to the interface without dislocations that undesirably thread through the thickness of the epilayer. These results should enable realization of improved SiC homojunction and heterojunction devices. In addition, these experiments offer important insights into the nature of polytypism during SiC crystal growth.

Remote sensing of plant emissions of volatile isoprenoids with PRI. Prospects for upscaling (Invited)

NASA Astrophysics Data System (ADS)

Penuelas, J.

2013-12-01

Josep Peñuelas*1,2, Giovanni Marino1,2,3,4, Joan LLusia1,2, Catherine Morfopoulos1,2,5, Gerard Farre-Armengol1,2, Shawn Kefauver, Alex Guenther6 , Francesca Rapparini7 , Roger Seco1,2,6, Marc Estiarte1,2, Mónica Mejia-Chang1,2, Romà Ogaya1,2, Jordi Sardans1,2 , Andrew Turnipseed6, Peter Harley6, Osvaldo Facini7, Rita Baraldi7, Jim Greenberg6 , Iolanda Filella1,2 1 CSIC, Global Ecology Unit CREAF-CEAB-UAB, Cerdanyola del Vallés 08193, Catalonia, Spain 2 CREAF, Cerdanyola del Vallés 08193, Catalonia, Spain 3 Dipartimento di Bioscienze e Territorio, Università degli Studi del Molise, Contrada Fonte Lappone, 86090 Pesche (IS), Italy 4 Institute for Plant Protection, National Research Council, Via Madonna del Piano 10, 50019 Sesto Fiorentino (FI), Italy 5 Division of Ecology and Evolution, Imperial College, Silwood Park, Ascot, SL5 7PY, UK 6 Atmospheric Chemistry Division, National Center for Atmospheric Research, P.O. Box 3000, Boulder, CO 80307-3000, USA 7 Biometeorology Institute, IBIMET-CNR, Via P. Gobetti 101, Bologna, Italy Abstract Terrestrial plants re-emit around 1-2% of the carbon they fix as isoprene and monoterpenes. These emissions play major roles in the ecological relationships among living organisms and in atmospheric chemistry and climate, and yet their actual quantification at the ecosystem level in different regions is far from being resolved. Phenomenological models are used to estimate the emission rates, but the limited understanding of the function and regulation of these emissions leads to large uncertainties in such estimations. Many measurements have been made at the foliar but few at the ecosystem level, and those that do exist are limited in space and time. We here provide evidence that a simple remote sensing index, the photochemical reflectance index (PRI), which is indicative of light use efficiency (LUE), is a good indirect estimator of foliar isoprenoid emissions and therefore can be used to sense them remotely. These results open new perspectives for potential use of remote sense techniques of vegetation in order to track isoprenoid emissions at larger scales. At ecosystemic scale, in a field measurement campaign in NE Iberian peninsula, PRI estimations fitted well both with MEGAN modelled data and with satellite data assessing formaldehyde as oxidation product of isoprenoids. On the other hand, our study shows the potential of this PRI technique to validate the availability of photosynthetic reducing power as a factor involved in isoprenoid production.

Analytical techniques for the evaluation of past conservation treatments on stone material from archaeological sites of Roman Augusta Emerita (Merida, Spain).

NASA Astrophysics Data System (ADS)

Perez, Natalia; Alvarez, Monica

2013-04-01

The effects that conservation treatments may have on stone material from archaeological sites are still unknown in many cases, taking into account the particular features of this material and the conditionality of each context. Unlike the standardized protocols used in other disciplines, in situ conservation of archaeological sites suffers from certain anarchy, both in the execution phase, as in that of subsequent monitoring process, usually nonexistent. That is why there are some inefficient treatments that are still in application in this field, and its effects, in terms of efficacy and durability, still unidentified. Moreover, the use of a very limited number of products has been commonly used in archaeology, not evolving as for instance architectural heritage. The project that is been carried out in some archaeological sites of the Roman city of Emerita Augusta (Mérida, Spain) focuses on this subject. The first phase involved the documentation and location of all interventions executed in selected sites, since the beginning of excavations in 1911, until today. Selected areas for analysis both on site and in laboratory will help to determine mentioned effects after some years of application. To assess the presence of any treatment, repair or product that has been either documented in the consulted reports and/or papers, or that can be observed just by looking, the following techniques are planned to be used: 1) In situ: portable and non destructive techniques such as Raman, XRF, spectrophotometer, roughness meter, ultrasound velocity, hardness tester, magnetometer, infrared camera, water absorption (Karsten tube) and humidity recordings of the surface. 2) Sampling: the minimum number and the smallest samples will be taken of different building materials, treated and untreated, unaltered and decayed, to be analyzed in the laboratory. 3) Samples will be analyzed by XRD, FTIR, optical and scanning electron microscope (SEM+EDS) and some properties determined as the water-repellence of the treatment by means of the contact angle analyzer. All these analyses will prove the conservation state of both the product/treatment and the substrate. 4) Some treatments will be tested in situ and its efficacy and durability measured and monitored by some non-destructive techniques and some other laboratory tests. This work is part of a PhD project which is been carried out within two research groups: - Analysis and Intervention in Architectural Heritage (AIPA, Universidad Politecnica de Madrid) - Applied Petrology for Heritage Conservation Research Group, Geosciences Institute (CSIC,UCM)

The Quest for the Africa-Eurasia plate boundary West of the Strait of Gibraltar

NASA Astrophysics Data System (ADS)

Zitellini, N.

2009-04-01

A new swath bathymetry compilation of the Gulf of Cadiz Area and SW Iberia is presented. The new map is the result of a collaborative research performed after year 2000 by teams from 7 European countries and 14 research institutions. This new dataset allow for the first time to present and to discuss the missing link in the plate boundary between Eurasia and Africa in the Central Atlantic. A set of almost linear and sub parallel dextral strike-slip faults, the SWIM Faults (SWIM is the acronym of the ESF EuroMargins project "Earthquake and Tsunami hazards of active faults at the South West Iberian Margin: deep structure, high-resolution imaging and paleoseismic signature") was mapped using a the new swath bathymetry compilation available in the area. The SWIM Faults form a narrow band of deformation over a length of 600 km coincident with a small circle centred on the pole of rotation of Africa with respect to Eurasia, This narrow band of deformation connects the Gloria Fault to the Rif-Tell Fault Zone, two segments of the plate boundary between Africa and Eurasia. In addition, the SWIM faults cuts across the Gulf of Cadiz, in the Atlantic Ocean, where the 1755 Great Lisbon earthquake, M~8.5-8.7, and tsunami were generated, providing a new insights on its source location. SWIM Team: E. Gràcia (2), L. Matias (3), P. Terrinha (4), M.A. Abreu (5), G. DeAlteriis(6), J.P. Henriet (7), J.J. Dañobeitia (2), D.G. Masson (8), T. Mulder (9), R. Ramella (10), L. Somoza (11) and S. Diez (2) (2) Unitat de Tecnologia Marina (CSIC), Centre Mediterrani d'Investigacions Marines i Ambientals, Barcelona, Spain (3) Centro Geofísica da Universidade de Lisboa (CGUL, IDL), Lisboa, Portugal (4) National Institute for Engineering, Technology and Innovation (INETI, LATTEX), Departamento de Geologia Marinha, Amadora, Portugal (5) Estrutura de Missão para a Extensão da Plataforma Continental, Lisboa, Portugal (6) Geomare Sud IAMC, CNR, Napoli, Italy (7) Renard Centre of Marine Geology, Dpt. Geology and Soil Science, Gent University, Gent, Belgium (8) National Oceanography Centre, European Way, Southampton, United Kingdom (9) Département de Géologie et Océanographie, Talence Cedex, France (10) Department for the Development of Marine Technology and Research, Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS), Sgonico, Italy (11) Geología Marina, Instituto Geológico y Minero de España, Madrid, Spain

PREFACE: 31st European Physical Society Conference on Plasma Physics

NASA Astrophysics Data System (ADS)

Dendy, Richard

2004-12-01

This special issue of Plasma Physics and Controlled Fusion comprises refereed papers contributed by invited speakers at the 31st European Physical Society Conference on Plasma Physics. The conference was jointly hosted by the Rutherford Appleton Laboratory, by the EURATOM/UKAEA Fusion Association and by Imperial College London, where it took place from 28 June to 2 July 2004. The overall agenda for this conference was set by the Board of the Plasma Physics Division of the European Physical Society, chaired by Friedrich Wagner (MPIPP, Garching) and his successor Jo Lister (CRPP, Lausanne). It built on developments in recent years, by further increasing the scientific diversity of the conference programme, whilst maintaining its depth and quality. A correspondingly diverse Programme Committee was set up, whose members are listed below. The final task of the Programme Committee has been the preparation of this special issue. In carrying out this work, as in preparing the scientific programme of the conference, the Programme Committee formed specialist subcommittees representing the different fields of plasma science. The chairmen of these subcommittees, in particular, accepted a very heavy workload on behalf of their respective research communities. It is a great pleasure to take this opportunity to thank: Emilia R Solano (CIEMAT, Madrid), magnetic confinement fusion; Jürgen Meyer-ter-Vehn (MPQ, Garching), laser-plasma interaction and beam plasma physics; and Jean-Luc Dorier (CRPP, Lausanne), dusty plasmas. The relatively few papers in astrophysical and basic plasma physics were co-ordinated by a small subcommittee which I led. Together with Peter Norreys (RAL, Chilton), we five constitute the editorial team for this special issue. The extensive refereeing load, compressed into a short time interval, was borne by the Programme Committee members and by many other experts, to whom this special issue owes much. We are also grateful to the Local Organizing Committee chaired by Henry Hutchinson (RAL, Chilton), and to the Plasma Physics and Controlled Fusion journal team (Institute of Physics Publishing, Bristol), for their work on this conference. At the 2004 European Physical Society Conference on Plasma Physics, plenary invited speakers whose talks spanned the entire field were followed, each day, by multiple parallel sessions which also included invited talks. Invited speakers in both these categories were asked to contribute papers to this special issue (the contributed papers at this conference, and at all recent conferences in this series, are archived at http://epsppd.epfl.ch). The Programme Committee is very grateful to the many invited speakers who have responded positively to this request. Invited papers appear here in their order of presentation during the week beginning 28 June 2004; this ordering provides an echo of the character of the conference, as it was experienced by those who took part. Programme Committee 2004 Professor Richard Dendy UKAEA Culham Division, UK Chairman and guest editor Dr Jean-Luc Dorier Centre de Recherches en Physique des Plasmas, Lausanne, Switzerland (Co-ordinator of dusty plasmas and guest editor) Professor Jürgen Meyer-ter-Vehn Max-Planck-Institut für Quantenoptik, Garching, Germany (Co-ordinator of laser-plasma interaction and beam plasma physics and guest editor) Dr Peter Norreys Rutherford Appleton Laboratory, Chilton, UK (Scientific Secretary and guest editor) Dr Emilia R Solano CIEMAT Laboratorio Nacional de Fusión, Madrid, Spain ( Co-ordinator of magnetic confinement fusion and guest editor) Dr Shalom Eliezer Soreq Nuclear Research Centre, Israel Dr Wim Goedheer FOM-Instituut voor Plasmafysica, Rijnhuizen, Netherlands Professor Henry Hutchinson Rutherford Appleton Laboratory, Chilton, UK Professor John Kirk Max-Planck-Institut für Kernphysik, Heidelberg, Germany Dr Raymond Koch Ecole Royale Militaire/Koninklijke Militaire School, Brussels, Belgium Professor Gerrit Kroesen Technische Universiteit Eindhoven, Netherlands Dr Martin Lampe Naval Research Laboratory, Washington DC, USA Dr Jo Lister Centre de Recherches en Physique des Plasmas, Lausanne, Switzerland Dr Paola Mantica Istituto di Fisica del Plasma, Milan, Italy Professor Tito Mendonca Instituto Superior Tecnico, Lisbon, Portugal Dr Patrick Mora École Polytechnique, Palaiseau, France Professor Lennart Stenflo Umeå Universitet, Sweden Professor Paul Thomas CEA Cadarache, Saint-Paul-lez-Durance, France Professor Friedrich Wagner Max-Planck-Institut fr Plasmaphysik, Garching, Germany Professor Hannspeter Winter Technische Universität Wien, Austria

Linking seasonal climate forecasts with crop models in Iberian Peninsula

NASA Astrophysics Data System (ADS)

Capa, Mirian; Ines, Amor; Baethgen, Walter; Rodriguez-Fonseca, Belen; Han, Eunjin; Ruiz-Ramos, Margarita

2015-04-01

Translating seasonal climate forecasts into agricultural production forecasts could help to establish early warning systems and to design crop management adaptation strategies that take advantage of favorable conditions or reduce the effect of adverse conditions. In this study, we use seasonal rainfall forecasts and crop models to improve predictability of wheat yield in the Iberian Peninsula (IP). Additionally, we estimate economic margins and production risks associated with extreme scenarios of seasonal rainfall forecast. This study evaluates two methods for disaggregating seasonal climate forecasts into daily weather data: 1) a stochastic weather generator (CondWG), and 2) a forecast tercile resampler (FResampler). Both methods were used to generate 100 (with FResampler) and 110 (with CondWG) weather series/sequences for three scenarios of seasonal rainfall forecasts. Simulated wheat yield is computed with the crop model CERES-wheat (Ritchie and Otter, 1985), which is included in Decision Support System for Agrotechnology Transfer (DSSAT v.4.5, Hoogenboom et al., 2010). Simulations were run at two locations in northeastern Spain where the crop model was calibrated and validated with independent field data. Once simulated yields were obtained, an assessment of farmer's gross margin for different seasonal climate forecasts was accomplished to estimate production risks under different climate scenarios. This methodology allows farmers to assess the benefits and risks of a seasonal weather forecast in IP prior to the crop growing season. The results of this study may have important implications on both, public (agricultural planning) and private (decision support to farmers, insurance companies) sectors. Acknowledgements Research by M. Capa-Morocho has been partly supported by a PICATA predoctoral fellowship of the Moncloa Campus of International Excellence (UCM-UPM) and MULCLIVAR project (CGL2012-38923-C02-02) References Hoogenboom, G. et al., 2010. The Decision Support System for Agrotechnology Transfer (DSSAT).Version 4.5 [CD-ROM].University of Hawaii, Honolulu, Hawaii. Ritchie, J.T., Otter, S., 1985. Description and performanceof CERES-Wheat: a user-oriented wheat yield model. In: ARS Wheat Yield Project. ARS-38.Natl Tech Info Serv, Springfield, Missouri, pp. 159-175.

Analysing deterioration of marble stones exposed to underwater conditions

NASA Astrophysics Data System (ADS)

Cámara, Beatriz; Álvarez de Buergo, Mónica; Bethencourt, Manuel; Freire-Lista, David; Fort, Rafael

2016-04-01

The peculiar conditions of the marine environment make the conservation of underwater archaeological sites an extremely complex procedure. This is due to the fact that the prevailing conditions in this environment promote the development of deterioration phenomena in submerged artefacts through the synergistic action of physical, chemical and biological factors. The objective of the present investigation was to determine how petrophysical properties of cultural heritage materials can be affected by being exposed to the specific underwater conditions of the sea bottom, and so, to evaluate how this can affect, in a long term, in their durability and evolution when they part of an archaeological site. For this purpose, two types of marble (the Italian Carrara and the Spanish Macael) were subjected to an experiment consisting of exposing stone materials for one and a half year to underwater conditions. The experimental test was located in an archaeological site in the Bay of Cadiz (southern Spain), Bajo del Chapitel (recognized as Cultural Interest), which includes remains of shipwrecks from different periods. In this site, samples were submerged to 12 m depth and placed in the sea bottom simulating the different positions in which underwater archaeological objects can be found (fully exposed, half buried and covered). Petrophysical characterisation involved determination of the apparent and bulk densities, water saturation (maximum water content a material may contain), open porosity (porosity accessible to water), chromatic parameters and ultrasonic velocity. Before measuring, samples were subjected to mechanical cleaning (in those samples with biological colonization) and to removal of salt deposits. Results showed significant differences in these petrophysical properties after underwater submersion, which were directly related to the type of underwater exposure condition. Comparative analysis of petrophysical properties, like the one conducted in this study, provides useful information for evaluation of the deterioration processes of heritage stones in a marine environment, and for conservation measures aimed at the in situ preservation of archaeological sites. Acknowledgements: Community of Madrid for financing Geomateriales2 program (P2013/MIT2914), CEI-Moncloa UCM-UPM, Applied Petrology for Heritage Stone Materials Conservation Research Group.

Enhanced Backscattering from Rough Surfaces

DTIC Science & Technology

1991-10-18

experimental results M. Nieto-Vesperinas and J. A. Sinchez-Gfi Insuituto de Optica. Consejo Superior de Investigaciones Cientificas, c/Serrono 1221. Madrid...2A7, UK I Division de Fisica Aplicada, CICESE, Apdo. Postal 2732 Ensenada, Baja California, Mexico Instituto de Optics, CSIC, Serrano 121, Madrid 2806...extracted as a de - is less than two for the copolarized case because of the scriptive parameter of the curves, and the variation of contribution of single

The Preparation and Microstructure of Nanocrystal 3C-SiC/ZrO2 Bilayer Films

PubMed Central

Ye, Chao; Ran, Guang; Zhou, Wei; Qu, Yazhou; Yan, Xin; Cheng, Qijin; Li, Ning

2017-01-01

The nanocrystal 3C-SiC/ZrO2 bilayer films that could be used as the protective coatings of zirconium alloy fuel cladding were prepared on a single-crystal Si substrate. The corresponding nanocrystal 3C-SiC film and nanocrystal ZrO2 film were also dividedly synthesized. The microstructure of nanocrystal films was analyzed by grazing incidence X-ray diffraction (GIXRD) and cross-sectional transmission electron microscopy (TEM). The 3C-SiC film with less than 30 nm crystal size was synthesized by Plasma Enhanced Chemical Vapor Deposition (PECVD) and annealing. The corresponding formation mechanism of some impurities in SiC film was analyzed and discussed. An amorphous Zr layer about 600 nm in width was first deposited by magnetron sputtering and then oxidized to form a nanocrystal ZrO2 layer during the annealing process. The interface characteristics of 3C-SiC/ZrO2 bilayer films prepared by two different processes were obviously different. SiZr and SiO2 compounds were formed at the interface of 3C-SiC/ZrO2 bilayer films. A corrosion test of 3C-SiC/ZrO2 bilayer films was conducted to qualitatively analyze the surface corrosion resistance and the binding force of the interface. PMID:29168782

Pushing the Limits of Piezoresistive Effect by Optomechanical Coupling in 3C-SiC/Si Heterostructure.

PubMed

Md Foisal, Abu Riduan; Qamar, Afzaal; Phan, Hoang-Phuong; Dinh, Toan; Tuan, Khoa-Nguyen; Tanner, Philip; Streed, Erik W; Dao, Dzung Viet

2017-11-22

This letter reports a giant opto-piezoresistive effect in p-3C-SiC/p-Si heterostructure under visible-light illumination. The p-3C-SiC/p-Si heterostructure has been fabricated by growing a 390 nm p-type 3C-SiC on a p-type Si substrate using the low pressure chemical vapor deposition (LPCVD) technique. The gauge factor of the heterostructure was found to be 28 under a dark condition; however, it significantly increased to about -455 under illumination of 635 nm wavelength at 3.0 mW/cm 2 . This gauge factor is over 200 times higher than that of commercial metal strain gauge, 16 times higher than that of 3C-SiC thinfilm, and approximately 5 times larger than that of bulk Si. This enhancement of the gauge factor was attributed to the opto-mechanical coupling effect in p-3C-SiC/p-Si heterostructure. The opto-mechanical coupling effect is the amplified effect of the photoconductivity enhancement and strain-induced band structure modification in the p-type Si substrate. These findings enable extremely high sensitive and robust mechanical sensors, as well as optical sensors at low cost, as no complicated nanofabrication process is required.

FIRST-PRINCIPLES CALCULATIONS OF INTRINSIC DEFECTS AND Mg TRANSMUTANTS IN 3C-SiC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Shenyang Y.; Setyawan, Wahyu; Van Ginhoven, Renee M.

2013-09-25

Silicon carbide (SiC) possesses many desirable attributes for applications in high-temperature and neutron radiation environments. These attributes include excellent dimensional and thermodynamic stability, low activation, high strength, and high thermal conductivity. Therefore, SiC based materials draw broad attention as structural materials for the first wall (FW) and blanket in fusion power plants. Under the severe high-energy neutron environment of D-T fusion systems, SiC suffers significant transmutation resulting in both gaseous and metallic transmutants. Recent calculations by Sawan, et al. [2] predict that at a fast neutron dose of ~100 dpa, there will be about 0.5 at% Mg generated in SiCmore » through nuclear transmutation. Other transmutation products, including 0.15 at% Al, 0.2 at% Be and 2.2 at% He, also emerge. Formation and migration energies of point defects in 3C-SiC have been widely investigated using density functional theory (DFT). However, the properties of defects associated with transmutants are currently not well understood. Fundamental understanding of where the transmutation products go and how they affect microstructure evolution of SiC composites will help to predict property evolution and performance of SiC-based materials in fusion reactors.« less

Design, Operation, and Modeling of a Vertical APCVD Reactor for Silicon Carbide Film Growth

NASA Technical Reports Server (NTRS)

DeAnna, Russell G.; Fleischman, Aaron J.; Zorman, Christian A.; Mehregany, Mehran

1998-01-01

An atmospheric pressure chemical vapor deposition (APCVD) reactor utilizing a unique vertical geometry which enables 3C-SiC films to be grown on two, 4-inch diameter Si wafers has been constructed. Contrary to expectations, 3C-SiC films grown in this reactor are thickest at the downstream end of the substrates. To better understand the reason for the thickness distribution on the wafers, an axisymmetric finite-element model of the gas flow in the reactor was constructed. The model uses the ANSYS53 Flowtran package and includes compressible and temperature-dependent fluid properties in laminar or turbulent flow. It does not include reaction chemistry or unsteady flow. The ANSYS53 results predict that the cool, inlet fluid falls through the inlet pipe and the warm, diffuser region like a jet. This jet impinges on top of the susceptor and gets diverted to the reactor side walls, where it flows to the bottom of the reactor, turns, and slowly rises along the face of the susceptor. This may explain why the SiC films are thickest at the downstream side of the wafers, as gas containing fresh reactants first passes over this region. Modeling results are presented for both one atmosphere and one half atmosphere reactor pressure.

Applied Mathematics for agronomical engineers in Spain at UPM

NASA Astrophysics Data System (ADS)

Anton, J. M.; Grau, J. B.; Tarquis, A. M.; Fabregat, J.; Sanchez, M. E.

2009-04-01

Mathematics, created or discovered, are a global human conceptual endowment, containing large systems of knowledge, and varied skills to use definite parts of them, in creation or discovery, or for applications, e.g. in Physics, or notably in engineering behaviour. When getting upper intellectual levels in the 19th century, the agronomical science and praxis was noticeably or mainly organised in Spain in agronomical engineering schools and also in institutes, together with technician schools, also with different lower lever centres, and they have evolved with progress and they are much changing at present to a EEES schema (Bolonia process). They work in different lines that need some basis or skills from mathematics. The vocation to start such careers, that have varied curriculums, contains only some mathematics, and the number of credits for mathematics is restrained because time is necessary for other initial sciences such as applied chemistry, biology, ecology and soil sciences, but some basis and skill of maths are needed, also with Physics, at least for electricity, machines, construction, economics at initial ground levels, and also for Statistics that are here considered part of Applied Mathematics. The ways of teaching mathematical basis and skills are especial, and are different from the practical ways needed e. g. for Soil Sciences, and they involve especial efforts from students, and especial controls or exams that guide much learning. The mathematics have a very large accepted content that uses mostly a standard logic, and that is remarkably stable and international, rather similar notation and expressions being used with different main languages. For engineering the logical basis is really often not taught, but the use of it is transferred, especially for calculus that requires both adapted somehow simplified schemas and the learning of a specific skill to use it, and also for linear algebra. The basic forms of differential calculus in several variables are an example, maybe since Leibnitz, of the difficulty of balance rigor and usefulness in limited hours of teaching. In part engineers use of mathematics with manuals and now with computers that use packages, general (MAPLE, MATLAB, may be MATHCAD, et. C. ) or specific, such as for Statistics, Topography, Structural design, Hydraulics, specific Machines,…, and mostly the details of the algorithms are hidden, but the engineer must have in mind the basic mathematical schemas justifying what he is constructing with these tools, the PC being also used for organisation and drawing. The engineers must adapt to the evolution of these packages and computers that get much changed and improved in five or ten years, quicker than the specific engineering environment, and a clear idea of the much more stable mathematical structures behind gives a solid mental ground for that. An initiation to using computers also with a mathematical structure behind is necessary, to be followed in professional life. A specific actualisation of mathematical knowledge is often necessary for some new applications.

Discourses and values underpin public debate on fracking in Spain: A case study at the crossroad

NASA Astrophysics Data System (ADS)

Hermelinda Lopera Pareja, Emilia; García Laso, Ana; Martín Sánchez, Domingo Alfonso

2015-04-01

In the EU context extraction of shale and oil gas by hydraulic fracturing (fracking) differs from country to country in terms of legislation and implementation. While fossil fuel extraction using this technology is currently taking place in the UK, Germany and France have adopted respective moratoria. In between is the Spanish case, where hydrocarbon extraction projects through fracking have to undergo mandatory and routine environmental assessment in accordance with the last changes to environmental regulations. Nowadays Spain is at the crossroad with respect to the future of this technology. We presume a social conflictt in our country since the position and strategy of the involved and confronted social actors -national, regional and local authorities, energy companies, scientists, NGO and other social organization- are going to play key and likely divergent roles in its industrial implementation and public acceptance. In order to improve knowledge on how to address these controverted situations from the own engineering context, the affiliated units from the Higher Technical School of Mines and Energy Engineering at UPM have been working on a transversal program to teach values and ethics. Over the past seven years, this pioneering experience has shown the usefulness of applying a consequentialist ethics, based on a case-by-case approach and costs-benefits analysis both for action and inaction. As a result of this initiative a theoretical concept has arisen and crystallized in this field: it is named Inter-ethics. This theoretical perspective can be very helpful in complex situations, with multi-stakeholders and plurality of interests, when ethical management requires the interaction between the respective ethics of each group; professional ethics of a single group is not enough. Under this inter-ethics theoretical framework and applying content analysis techniques, this paper explores the articulation of the discourse in favour and against fracking technology and its underlying values as manifested in the Spanish traditional mass media and emerging social media such as Youtube. Results show that Spanish public discourse on fracking technology includes the costs-benefits analysis to communicate how natural resources from local communities may be affected by these facilities due to environmental, health and economic consequences. Furthermore, this technology is represented as a solution to the "demand of energy" according to the optimistic discourse while, from a pessimistic view, fracking is often framed as a source "environmental problems" and even natural disasters as possible earthquakes. In this latter case, this negative representation could have been influenced by the closure of a macro project to store injected natural gas in the Mediterranean Sea using the old facilities of an oil exploitation in Amposta (Proyecto Cástor). The closure of this project was due to the occurrence of earthquakes whose intensity was higher than the originally expected by the experts in the assessment stage of the project.

Young Star May Be Belching Spheres of Gas, Astronomers Say

NASA Astrophysics Data System (ADS)

2001-05-01

A young star more than 2,000 light-years away in the constellation Cepheus may be belching out spheres of gas, say astronomers who observed it with the National Science Foundation's Very Long Baseline Array (VLBA) radio telescope. Not only is the star ejecting spheres of gas, the researchers say, but it also may be ejecting them repeatedly, phenomena not predicted by current theories of how young stars shed matter. Cepheus A star-forming region with blowups of detail In order to remain stable while accumulating matter, young stars have to throw off some of the infalling material to avoid "spinning up" so fast they would break apart, according to current theories. Infalling matter forms a thin spinning disk around the core of the new star, and material is ejected in twin "jets" perpendicular to the plane of the disk. "Twin jets have been seen emerging from many young stars, so we are quite surprised to see evidence that this object may be ejecting not jets, but spheres of gas," said Paul T.P. Ho, an astronomer at the Harvard-Smithsonian Center for Astrophysics. The research is reported in the May 17 edition of the scientific journal Nature. The astronomers observed a complex star-forming region in Cepheus and found an arc of water molecules that act like giant celestial amplifiers to boost the strength of radio signals at a frequency of 22 GHz. Such radio-wave amplifiers, called masers, show up as bright spots readily observed with radio telescopes. "With the great ability of the VLBA to show fine detail, we could track the motions of these maser spots over a period of weeks, and saw that this arc of water molecules is expanding at nearly 20,000 miles per hour," said Ho. "This was possible because we could detect detail equivalent to seeing Lincoln's nose on a penny in Los Angeles from the distance of New York," Ho added. "These observations pushed the tremendous capabilities of the VLBA and of modern computing power to their limits. This is an extremely complex observational project," said Luis F. Rodriguez, of Mexico's National Autonomous University. The arc of water masers can be fit to a nearly-perfect circle to within one part in a thousand. That, the researchers say, means that the water vapor in the arc most likely is part of a complete sphere. "The arc we see fits a circle so well that it is unlikely that any geometry other than that of a sphere would produce it," Ho said. The sphere would be about 1.5 times the size of the Solar System. Because the arc, and presumably the sphere of which it is part, is so thin and so uniform, the researchers say that it came from a single, short-lived ejection. In addition, other evidence suggests that the sphere from an earlier ejection now is being overtaken by a newer spherical bubble that took only about 33 years after being ejected to reach its observed size. "We now have at least one case, we believe, in which a young star has repeatedly ejected mass spherically in short bursts," Guillem Anglada, of the Institute of Astrophysics of Andalucia (CSIC), in Granada, Spain, said. "In light of our current understanding of star formation, we don't yet understand how this can happen, so we have an exciting new scientific challenge. It is surprising that nature can maintain such perfect symmetry, especially since the environment around the young star must be so varied. This appears to be a triumph of order over chaos," he added. The researchers, in addition to Rodriguez, Ho and Anglada, are: Jose M. Torrelles, Institute for Space Studies of Catalonia (IEEC)-Spanish Research Council (CSIC), Spain; Nimesh A. Patel and Lincoln Greenhill, of the Harvard-Smithsonian Center for Astrophysics; Jose F. Gomez, Laboratory for Space Astrophysics and Theoretical Physics of the National Institute for Aerospace Technology, Madrid, Spain; Salvador Curiel and Jorge Canto, of Mexico's National Autonomous University; and Guido Garay, Department of Astronomy of the University of Chile. The VLBA is part of the National Radio Astronomy Observatory. It consists of ten radio-telescope antennas, each 82 feet (25 meters) in diameter, spread across the U.S. from Hawaii to the U.S. Virgin Islands. Operated from Socorro, New Mexico, the VLBA provides astronomers with the greatest angular resolution, or ability to see fine detail, of any telescope on Earth or in space. The National Radio Astronomy Observatory is a facility of the National Science Foundation, operated under cooperative agreement by Associated Universities, Inc. The Center for Astrophysics combines the resources and research facilities of the Harvard College Observatory and the Smithsonian Astrophysical Observatory under a single director to pursue studies of those basic physical processes that determine the nature and evolution of the universe. Some 300 Smithsonian and Harvard scientists cooperate in broad programs of astrophysical research supported by Federal appropriations and University funds as well as contracts and grants from government agencies.

A Center for Advanced Electrical and Structural Polymers

DTIC Science & Technology

1988-10-31

REPORT I 3b. TIME COVERED 14. DATE OF REPORT (Year, Month, Oay) IS. PAGE COUNT Final j FROM TO 44 16. SUPPLEMENTARY NOTATION 17. COSATI CODES 18...Banhegyi Dr. N. Easwar Dr. Z. Chai Dr. K. Liang Dr. S. Choe Dr. G. Smyth Dr. P. Cifra Dr. J . Kim Dr. W. Huh Dr. Q. Bhatia Dr. J . Grobelny Dr. P... J . Chen (WSU) Dr. G. Quin Dr. M. Sinksy (WSU) Dr. N. Segudovic Dr. R. Miller (WSU) Dr. G. Shy Dr. Y. Gur Mr. L. Wu Dr. T. Bleha Dr. A. Sikora Dr. H

PREFACE: Proceedings of the 7th International LISA Symposium, Barcelona, Spain, 16-20 June 2008

NASA Astrophysics Data System (ADS)

Lobo, Alberto; Sopuerta, Carlos F.

2009-07-01

In June 2006 the LISA International Science Team (LIST) accepted the bid presented by the Institut d'Estudis Espacials de Catalunya (IEEC) to host the 7th International LISA Symposium. This was during its 11th meeting at the University of Maryland, just before the 6th edition of the Symposium started in NASA's Goddard Space Flight Center. The 7th International LISA Symposium took place at the city of Barcelona, Spain, from 16-20 June 2008, in the premises of CosmoCaixa, a modern Science Museum located in the hills near Tibidabo. Almost 240 delegates registered for the event, a record breaking figure compared to previous editions of the Symposium. Many of the most renowned world experts in LISA, Gravitational Wave Science, and Astronomy, as well as Engineers, attended LISA 7 and produced state-of-the-art presentations, while everybody benefited from the opportunity to have live discussions during the week in a friendly environment. The programme included 31 invited plenary lectures in the mornings, and 8 parallel sessions in the afternoons. These were classified into 7 major areas of research: LISA Technology, LISA PathFinder, LISA PathFinder Data Analysis, LISA Data Analysis, Gravitational Wave sources, Cosmology and Fundamental Physics with LISA and Other Gravitational Wave Detectors. 138 abstracts for communications were received, of which a selection was made by the session convenors which would fit time constraints. Up to 63 posters completed the scientific programme. More details on the programme, including some of the talks, can be found at the Symposium website: http://www.ice.cat/research/LISA_Symposium. There was however a remarkable add-on: Professor Clifford Will delivered a startling presentation to the general public, who completely filled the Auditori—the main Conference Room, 320 seats—and were invited to ask questions to the speaker who had boldly guided them through the daunting world of Black Holes, Waves of Gravity, and other Warped Ideas of Dr Einstein. The Proceedings of the 7th International LISA Symposium are jointly published by Classical and Quantum Gravity (CQG) and Journal of Physics: Conference Series (JPCS). This formula has a precedent in the last Amaldi Conference (Sydney 2007), and was motivated by the impossibility to fit all communications into a single CQG volume. Plenary speakers were invited to submit their contributions to CQG, and so were a number of parallel session authors chosen by the session convenors and the Science Organising Committee (SOC). Authors of the other parallel session presentations and posters were invited to submit to JPCS. All papers have been peer reviwed prior to being accepted for publication in either journal, and the whole set is well representative of the talks we heard during the Symposium. Thanks are accordingly due to all authors for their collaborative attitude and, more generally, to all delegates who came to Barcelona and made of the Symposium a first class scientific event. The LISA community has been steadily growing since the Symposium took off in Chilton, near Oxford (UK) back in 1996. The support of such community strongly endorses a complex mission Project, whose short term future requires such support for a much longer term new era of Gravitational Wave Astronomy and Fundamental Physics. In this sense, the number of attendees and their active interest in the LISA mission sparks optimism. The 7th International LISA Symposium sponsors are also sincerely acknowldged. They are: the Albert Einstein Institute (Hannover), the Spanish Ministry of Science and Innovation, the Generalitat de Catalunya (AGAUR), the Barcelona Institute of High Energy Physics (IFAE), the University of Barcelona (UB), the Polytechnique University of Catalunya (UPC), the Spanish Society of General Relativity and Gravitation (SEGRE), CosmoCaixa, NASA and the European Space Agency (ESA). The latter provided the LISA PathFinder model, a 1:4 scale model whose primer display we enjoyed during the Symposium. Finally, the Local Organising Committee and the IEEC staff have given their enthusiastic support to the organisation in every detail, and have efficiently worked for months to make the Symposium happen. Many thanks to all of them, and congratulations. Alberto Lobo and Carlos F Sopuerta Institut de Ciències de l'Espai (CSIC-IEEC) Guest Editors

Opioids in oral fluid of Spanish drivers.

PubMed

Herrera-Gómez, Francisco; García-Mingo, Mercedes; Colás, Mónica; González-Luque, Juan Carlos; Álvarez, F Javier

2018-06-01

Driving under the influence of certain drugs is not allowed, and roadside drug testing is being considered an important tool for deterring driving under the influence of them. This study aimed to assess the presence and concentration of opioids, as well as their combined use with other drugs (laboratory confirmation after the on-road screening) in Spanish drivers between 2011 and 2016. In Spain, mandatory roadside breath alcohol and oral fluid drug testing (screening) are carried out by the Traffic Police using Dräger Alcotest ® 6810 device, and Dräger DrugTest ® 5000, DrugWipe ® , or Alere™ DDS ® 2 Mobile Test System. For positive cases in the period covered, 65,244, confirmation analysis and quantification using chromatographic techniques were performed. Opioids were confirmed in 8.6% of positive cases, being 7.2% positives to 6-acetylmorphine (6-AM), 6.5% to morphine, 5.4% to codeine, and 4.1% to methadone. The majority of the confirmed tests for morphine (96.5%), codeine (88.4%) and methadone (81.9) were also positive for 6-AM. The presence of other drugs, particularly cocaine and cannabis, was very common. Concentration values reached important levels. Positive results for morphine (0.1%), codeine (0.6%) or methadone (0.4%) alone were very infrequent. Drivers with a confirmed positive roadside test for morphine, codeine, and methadone had also consumed heroin and/or other illicit drugs, such as cocaine and/or THC, and at relevant concentrations. Improving interventions to combat the problem of driving under the influence of driving-impairing substances is a priority. Copyright © 2018 Elsevier B.V. All rights reserved.

Innovation through College Classroom Teacher: an Analysis of Experience

NASA Astrophysics Data System (ADS)

Gonzalez-Tirados, Rosa Maria; Medina-Rojas, Silvia

2014-05-01

If we make a balance on the training received by the university professors to exercise its teaching skills we can find in Spain institutions, like Institute of Education Sciences (ICE), that have more than 40 years of existence, have been developing this role with great success and have data from this experience. It is true that only a few universities have created and promoted these institutions mostly from 70 Law and even today continue to develop training, modernized and adapted to the current needs of each university. Even some of them have created new ones, changed the name to Centers of Excellence or Innovation although not their functions, others such as the Universidad Politécnica de Madrid (UPM), have incorporated these features of quality, innovation to their current actions. Despite this training in some universities, it is a voluntary and individual fact that every teacher, either by joining teaching for the first time or when want to upgrade, renovate or simply as a form of share experiences with other fellow teachers of other grades and may have the same problems. Looking at the same university context, in other countries, we see something similar in regards to common joint rules for access to the teaching profession as in other types of training, and also differences occurs in the recognition that training is done, unlike that resolves research and innovation taking place in the university. From a teacher training institution as the ICE at UPM, with a long experience in this training, we have managed to consolidate the organization and actions. In addition, we have learned to capture teachers attention, trying to find an appreciation for " the value of training " by the need to upgrade and the fact of knowing innovative methods and techniques to help them improve their teaching by, first, that students learn more and better themselves and, second, that teachers, mastering techniques, feel increasingly confident in the classroom and to the satisfaction of what they do is well done. Although this statement can be seen truncated as in the current moment research has higher priority versus teaching and scientific publications address the training and even mobility management or come to have more value than the training itself and learning along the life, although this phrase is used a lot from Bologna called Treaty. In these circumstances it is very difficult to practicing teachers, their training and educational needs updating, because what they are going to value professional development is, first, their research experience, giving the highest score at CV than to your educational background, teaching experience, also valued more educational management and administration. In this work we will provide objective data on the results regarding the university teachers training and different learning models that we have developed, as well as the achievements on the level of participation in the last ten years, the level of satisfaction and the innovation performance in the classroom, after receiving training. In addition, we would like to raise a discussion forum on the future of university faculty training for the profession of teaching and provoke interest here some questions for discussion and possible solutions: • Where should we focus on the university teachers training? • What is the status of university teacher Centers training in other EU countries? • What are the training models in other countries of the European Union? • What is the value and who appreciates the teacher training? • Should be mandatory or would be detrimental and would not be interested? A teacher should be an expert, brushing or reaching the excellence of their own knowledge, not to mention minimum-pedagogical training bases. Otherwise he will be an excellent researcher, something that is always needed, but mediocre or bad teacher that can cause irreparable damage to some students that fall in his class.

EDITORIAL: The 19th MicroMechanics Europe Workshop (MME 2008) The 19th MicroMechanics Europe Workshop (MME 2008)

NASA Astrophysics Data System (ADS)

Schnakenberg, Uwe

2009-07-01

This special issue of Journal of Micromechanics and Microengineering is devoted to the 19th MicroMechanics Europe Workshop (MME 08), which took place at the RWTH Aachen University, Aachen, Germany, from 28-30 September, 2008. The workshop is a well recognized and established European event in the field of micro system technology using thin-film technologies for creating micro components, micro sensors, micro actuators, and micro systems. The first MME Workshop was held 1989 in Enschede (The Netherlands) and continued 1990 in Berlin (Germany), 1992 in Leuven (Belgium), and then was held annually in Neuchâtel (Switzerland), Pisa (Italy), Copenhagen (Denmark), Barcelona (Spain), Southampton (UK), Ulvik in Hardanger (Norway), Gif-sur-Yvette (France), Uppsala (Sweden), Cork (Ireland), Sinaia (Romania), Delft (The Netherlands), Leuven (Belgium), Göteborg (Sweden), Southampton (UK), and in Guimarães (Portugal). The two day workshop was attended by 180 delegates from 26 countries all over Europe and from Armenia, Austria, Bulgaria, Canada, China, Cuba, Iran, Japan, Korea, Malaysia, Taiwan, Turkey, and the United States of America. A total of 97 papers were accepted for presentation and there were a further five keynote presentations. I am proud to present 22 high-quality papers from MME 2008 selected for their novelty and relevance to Journal of Micromechanics and Microengineering. All the papers went through the regular reviewing procedure of IOP Publishing. I am eternally grateful to all the referees for their excellent work. I would also like to extend my thanks to the members of the Programme Committee of MME 2008, Dr Reinoud Wolffenbuttel, Professor José Higino Correia, and Dr Patrick Pons for pre-selection of the papers as well as to Professor Robert Puers for advice on the final selection of papers. My thanks also go to Dr Ian Forbes of IOP Publishing for managing the entire process and to the editorial staff of Journal of Micromechanics and Microengineering. I trust that this special issue will provide new trends of the emerging field of micro system technology and I hope you enjoy reading it.

Emerging Technologies Program Integration Report. Volume 1. Narrative, Analyses and Assessment

DTIC Science & Technology

1987-05-04

James S. (T) 31. GREGG, Dr. Michael C. (T) 61. REDDY, Dr. Raj (T) 2. ATLAS, Dr. David (T) 32. HADDAD, Dr. Genevieve M. 62. REDIKER, Dr. Robert H. 3...Dr. Martin C. 83. WEEKS, Dr. Wilford 6 24. FAETH, Dr. Gerald 54. MUNSON, Mr. John 84. WEINTRAUB, Dr. Daniel 1. (T) 25. FETTERMAN , Dr. Harold 55...T) 2. ATLAS, Dr. David (T) 32. HADDAD, Dr. Genevieve M. 62. REDIKER, Dr. Robert H. 3. BALDESCHWIELER, Dr. John (T) 33. HAMMOND, Dr. George S. 63

Recent advances in magnetic nanoparticles with bulk-like properties

NASA Astrophysics Data System (ADS)

Batlle, Xavier

2013-03-01

Magnetic nanoparticles (NP) are an excellent example of nanostructured materials and exhibit fascinating properties with applications in high-density recording and biomedicine. Controlling the effects of the nanostructure and surface chemistry and magnetism at the monolayer level have become relevant issues. As the size is reduced below 100 nm, deviations from bulk behavior have been attributed to finite-size effects and changes in the magnetic ordering at the surface, thus giving rise to a significant decrease in the magnetization and increase in the magnetic anisotropy. The existence of a surface spin glass-like state due to magnetic frustration has been widely suggested in ferrimagnetic NP. However, in this talk, we will show that high crystal quality magnetite Fe3-xO4 NP of about a few nanometers in diameter and coated with different organic surfactants display bulk-like structural, magnetic and electronic properties. Magnetic measurements, transmission electron microscopy, X-ray absorption and magnetic circular dichroism and Monte Carlo simulations, evidenced that none of the usual particle-like behavior is observed in high quality NP of a few nm. Consequently, the magnetic and electronic disorder phenomena typically observed in those single-phase ferrimagnetic NP should not be considered as an intrinsic effect. We also performed a real-space characterization at the sub-nanometer scale, combining scanning transmission electron microscopy, electron energy loss spectroscopy and electron magnetic chiral dichroism. For the first time, we found that the surface magnetization is as high as about 70% of that of the core. The comparison to density functional theory suggested the relevance of the strong surface bond between the Fe ions and the organic surfactant. All the foregoing demonstrates the key role of both the crystal quality and surface bond on the physical properties of ferrimagnetic NP and paves the way to the fabrication of the next generation of NP with optimal magnetic properties. Some bio-applications will also be discussed. In collaboration with A Labarta, N Perez, O Iglesias, A Fraile, C Moya(U Barcelona); A Roca, MP Morales, CJ Serna (ICMM-CSIC); F Bartolome, LM Garcia, J. Bartolome (CSIC-U Zaragoza); R Mejias, DF Barber (CNB-CSIC); M Varela, J Gazquez, J Salafranca, SJ Pennycook (ORNL), ST Pantelides (Vanderbilt U).

Process for the controlled growth of single-crystal films of silicon carbide polytypes on silicon carbide wafers

NASA Technical Reports Server (NTRS)

Powell, J. Anthony (Inventor)

1991-01-01

This invention is a method for the controlled growth of single-crystal semiconductor device quality films of SiC polytypes on vicinal (0001) SiC wafers with low tilt angles. Both homoepitaxial and heteroepitaxial SiC films can be produced on the same wafer. In particular, 3C-SiC and 6H-SiC films can be produced within selected areas of the same 6H-SiC wafer.

Process for the controlled growth of single-crystal films of silicon carbide polytypes on silicon carbide wafers

NASA Technical Reports Server (NTRS)

Larkin, David J. (Inventor); Powell, J. Anthony (Inventor)

1992-01-01

A method for the controlled growth of single-crystal semiconductor-device-quality films of SiC polytypes on vicinal (0001) SiC wafers with low tilt angles is presented. Both homoepitaxial and heteroepitaxial SiC films can be produced on the same wafer. In particular, 3C-SiC and 6H-SiC films can be produced within selected areas of the same 6H-SiC wafer.

New family of graphene-based organic semiconductors: An investigation of photon-induced electronic structure manipulation in half-fluorinated graphene

NASA Astrophysics Data System (ADS)

Walter, Andrew L.; Sahin, Hasan; Kang, Jun; Jeon, Ki-Joon; Bostwick, Aaron; Horzum, Seyda; Moreschini, Luca; Chang, Young Jun; Peeters, Francois M.; Horn, Karsten; Rotenberg, Eli

2016-02-01

The application of graphene to electronic and optoelectronic devices is limited by the absence of reliable semiconducting variants of this material. A promising candidate in this respect is graphene oxide, with a band gap on the order of ˜5 eV , however, this has a finite density of states at the Fermi level. Here, we examine the electronic structure of three variants of half -fluorinated carbon on Sic(0001), i.e., the (6 √{3 }×6 √{3 } ) R 30∘ C/SiC "buffer layer," graphene on this (6 √{3 }×6 √{3 } ) R 30∘ C/SiC buffer layer, and graphene decoupled from the SiC substrate by hydrogen intercalation. Using angle-resolved photoemission, core level photoemission, and x-ray absorption, we show that the electronic, chemical, and physical structure of all three variants is remarkably similar, exhibiting a large band gap and a vanishing density of states at the Fermi level. These results are explained in terms of first-principles calculations. This material thus appears very suitable for applications, even more so since it is prepared on a processing-friendly substrate. We also investigate two separate UV photon-induced modifications of the electronic structure that transform the insulating samples (6.2-eV band gap) into semiconducting (˜2.5 -eV band gap) and metallic regions, respectively.

High temperature energy harvesters utilizing ALN/3C-SiC composite diaphragms

NASA Astrophysics Data System (ADS)

Lai, Yun-Ju; Li, Wei-Chang; Felmetsger, Valery V.; Senesky, Debbie G.; Pisano, Albert P.

2014-06-01

Microelectromechanical systems (MEMS) energy harvesting devices aiming at powering wireless sensor systems for structural health monitoring in harsh environments are presented. For harsh environment wireless sensor systems, sensor modules are required to operate at elevated temperatures (> 250°C) with capabilities to resist harsh chemical conditions, thereby the use of battery-based power sources becomes challenging and not economically efficient if considering the required maintenance efforts. To address this issue, energy harvesting technology is proposed to replace batteries and provide a sustainable power source for the sensor systems towards autonomous harsh environment wireless sensor networks. In particular, this work demonstrates a micromachined aluminum nitride/cubic silicon carbide (AlN/3C-SiC) composite diaphragm energy harvester, which enables high temperature energy harvesting from ambient pulsed pressure sources. The fabricated device yields an output power density of 87 μW/cm2 under 1.48-psi pressure pulses at 1 kHz while connected to a 14.6-kΩ load resistor. The effects of pulse profile on output voltage have been studied, showing that the output voltage can be maximized by optimizing the diaphragm resonance frequency based on specific pulse characteristics. In addition, temperature dependence of the diaphragm resonance frequency over the range of 20°C to 600°C has been investigated and the device operation at temperatures as high as 600°C has been verified.

Development of a mobile application based on RUSLE model to predict erosion in olive groves

NASA Astrophysics Data System (ADS)

Marín Moreno, Víctor Javier; Redel, María Dolores; Taguas, Encarnación V.

2017-04-01

Environmental impact of agriculture in fragile areas such as the Mediterranean Basin due to its scarcity and/or variability of water resources or to their susceptibility to soil erosion may be extremely damaging. Over 96% of the world's olive oil is produced in Mediterranean countries (FAOSTAT, 2014). Suitable managements and environmental evaluations of the conditions in olive cultivation farms is of major relevance for countries such as Spain, particularly in Andalusia (in Southern Spain) with an olive orchard area of 1.5 Mha (CAP, 2016). The average erosion rates in olive orchard in Southern Spain are approximately 19 tons.ha-1.year-1. It is worth noting how 23% of this surface presents high or very high erosion rates with values over 50 tons.ha-1.year-1 (Areal, 2014). Most of farmers implement soil conservation practices only when have they perceived high erosion risk (Franco, 2011: Taguas and Gómez, 2015). On the other hand, technicians also require proper technological tools to evaluate in a straightforward way, soil loss risk in the field. Simple tools integrated into smartphones may enable us to evaluate soil erosion rates through minimum information; which would be a great help in raising farmer awareness as well as in environmental control. In this work, the preliminary version of RIESGO (Risk Index for Erosion Soil in Olive Groves) , -an APP mobile based in SECO (Soil Erosion Calculator in Olives; Marín-Moreno et al. 2013) that promises broad functionality to identify soil loss risk in the field,- is presented. Features such as simple screens, a reduced group of input data, calculations for R and K factors based on environmental information of Andalusia which are identified from geographical coordinates and a new method of obtaining factor C from empirical data have been integrated to fit its use in the field. RIESGO is and hybrid application which was programmed by using web technologies HTML, CSS and JavaScript, and built with Visual Studio Tools for Apache Cordova, which are very efficient to facilitate its implementation in most of mobile platforms. The first evaluations from farmers and technicians are also presented in order to improve the first version. References: - Areal, F.J., Riesgo, L., 2014. Farmers' views on the future of olive farming in Andalusia, Spain. Land Use Policy 36 (2014) 543- 553. - CAPyDR, 2016. Aforo de producción de olivar en Andalucía, Campaña 2016-2017. Consejería de Agricultura, Pesca y Desarrollo Rural - Junta de Andalucía. Regional Government of Andalusia, Seville (2016) (Spain) - FAOSTAT -2016. FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS STATISTICS. Accessed at: http://www.fao.org/faostat - Franco, J.A., 2011. Análisis de los factores de participación en programas agroambientales de lucha contra la erosión en el olivar. ITEA 107 (3), 169-183. - Renard, K. G., Foster, G. R., Wessies, G. A., Mccool, D. K., and Yoder, D. C., 1997. Predicting Soil Ero¬sion by Water: A Guide to Conservation Planning with the Revised Universal LossEquation (RUSLE). USDA Agriculture Handbook, No. 703. - Taguas, E.V., Gómez, J.A., 2015. Vulnerability of olive orchards under the current CAP (Common Agricultural Policy) regulations on soil erosion: a study case in Southern Spain. Land Use Policy, 42, 683-694

Testing fully depleted CCD

NASA Astrophysics Data System (ADS)

Casas, Ricard; Cardiel-Sas, Laia; Castander, Francisco J.; Jiménez, Jorge; de Vicente, Juan

2014-08-01

The focal plane of the PAU camera is composed of eighteen 2K x 4K CCDs. These devices, plus four spares, were provided by the Japanese company Hamamatsu Photonics K.K. with type no. S10892-04(X). These detectors are 200 μm thick fully depleted and back illuminated with an n-type silicon base. They have been built with a specific coating to be sensitive in the range from 300 to 1,100 nm. Their square pixel size is 15 μm. The read-out system consists of a Monsoon controller (NOAO) and the panVIEW software package. The deafualt CCD read-out speed is 133 kpixel/s. This is the value used in the calibration process. Before installing these devices in the camera focal plane, they were characterized using the facilities of the ICE (CSIC- IEEC) and IFAE in the UAB Campus in Bellaterra (Barcelona, Catalonia, Spain). The basic tests performed for all CCDs were to obtain the photon transfer curve (PTC), the charge transfer efficiency (CTE) using X-rays and the EPER method, linearity, read-out noise, dark current, persistence, cosmetics and quantum efficiency. The X-rays images were also used for the analysis of the charge diffusion for different substrate voltages (VSUB). Regarding the cosmetics, and in addition to white and dark pixels, some patterns were also found. The first one, which appears in all devices, is the presence of half circles in the external edges. The origin of this pattern can be related to the assembly process. A second one appears in the dark images, and shows bright arcs connecting corners along the vertical axis of the CCD. This feature appears in all CCDs exactly in the same position so our guess is that the pattern is due to electrical fields. Finally, and just in two devices, there is a spot with wavelength dependence whose origin could be the result of a defectous coating process.

Submarine seismic monitoring of El Hierro volcanic eruption with a 3C-geophone string: applying new acquisition and data processing techniques to volcano monitoring

NASA Astrophysics Data System (ADS)

Jurado, Maria Jose; Ripepe, Maurizio; Lopez, Carmen; Blanco, Maria Jose; Crespo, Jose

2015-04-01

A submarine volcanic eruption took place near the southernmost emerged land of the El Hierro Island (Canary Islands, Spain), from October 2011 to February 2012. The Instituto Geografico Nacional (IGN) seismic stations network evidenced seismic unrest since July 2011 and was a reference also to follow the evolution of the seismic activity associated with the volcanic eruption. Right after the eruption onset, in October 2011 a geophone string was deployed by the CSIC-IGN to monitor seismic activity. Monitoring with the seismic array continued till May 2012. The array was installed less than 2 km away from the new vol¬cano, next to La Restinga village shore in the harbor from 6 to 12m deep into the water. Our purpose was to record seismic activity related to the volcanic activity, continuously and with special interest on high frequency events. The seismic array was endowed with 8, high frequency, 3 component, 250 Hz, geophone cable string with a separation of 6 m between them. Each geophone consists on a 3-component module based on 3 orthogonal independent sensors that measures ground velocity. Some of the geophones were placed directly on the seabed, some were buried. Due to different factors, as the irregular characteristics of the seafloor. The data was recorded on the surface with a seismometer and stored on a laptop computer. We show how acoustic data collected underwater show a great correlation with the seismic data recorded on land. Finally we compare our data analysis results with the observed sea surface activity (ash and lava emission and degassing). This evidence is disclosing new and innovative tecniques on monitoring submarine volcanic activity. Reference Instituto Geográfico Nacional (IGN), "Serie El Hierro." Internet: http://www.ign.es/ign/resources /volcanologia/HIERRO.html [May, 17. 2013

Index of Oral Histories Relating to Naval Research and Development

DTIC Science & Technology

1985-01-01

Repositories: NWC, DTNSRDC, NHC Individuals mentioned: Amlie, Dr. Thomas S. LaBerge , Dr. Walter McLean, Dr. William B. Parsons, RADM William S. Smith...future of R&D in the Navy. Repositories: NWC, DTNSRDC, NHC Individuals mentioned: Bennett, Dr. Ira Hollingsworth, Dr. Guilford L. LaBerge , Dr. Walter...DTNSRDC, NHC Individuals mentioned: Hunter, Dr. Hugh LaBerge . Dr. Walter McLean, Dr. William B. Brode, Dr. Wallace C. Sage, Dr. Bruce Wilson, Dr. Haskell

NGScloud: RNA-seq analysis of non-model species using cloud computing.

PubMed

Mora-Márquez, Fernando; Vázquez-Poletti, José Luis; López de Heredia, Unai

2018-05-03

RNA-seq analysis usually requires large computing infrastructures. NGScloud is a bioinformatic system developed to analyze RNA-seq data using the cloud computing services of Amazon that permit the access to ad hoc computing infrastructure scaled according to the complexity of the experiment, so its costs and times can be optimized. The application provides a user-friendly front-end to operate Amazon's hardware resources, and to control a workflow of RNA-seq analysis oriented to non-model species, incorporating the cluster concept, which allows parallel runs of common RNA-seq analysis programs in several virtual machines for faster analysis. NGScloud is freely available at https://github.com/GGFHF/NGScloud/. A manual detailing installation and how-to-use instructions is available with the distribution. unai.lopezdeheredia@upm.es.

Supercritical Wing Preliminary Design Study

DTIC Science & Technology

1975-12-01

SHIN «" NOME« <i./t. TAK t«/C» Ttff MA. TAft 4P) JON*« SO M »<• n y »■« • ii n VT«t 4il rtt-Tin J.l.. .S • T» 4...UPM At 1 54 ;t’ -"fi Vitll TI|K EMS IQH A4 ZEE TAff i>^ /tr TAfE <!•/£► TAK KOMUl CUJT« ■no pl TfJK A« *>1» FT J’ T<»£ 511...N« AMT* Oa/tr I» MB »AIM NO. NO. MATEWAL n «ttr ASSY Ott».!. -1 fio.if 5»»« J («It» TAK , I 1 ftf»6 Sf»* »" Cit/t»T««l

[Urología Clínica, bulletin of the Urology Service of Dr. Sánchez Covisa of the Hospital Provincial of Madrid, edited between 1928 and 1936].

PubMed

Pérez-Albacete, M; Saiz, A

2012-02-01

Make known the important urological work of Sanchez Covisa, third chief of the Urology Service of the Hospital Provincial de Madrid, who beginning in 1928 was able to transform and convert it into possibly the more outstanding one of its time in Spain, comparable to the best hospitals in foreign countries. We have analyzed the contents of the publication Urología Clínica, that collect the changes introduced and the work carried out in said service between 1928 and 1936, reflected in a careful yearly statistics on the care, operations and mortality in addition to the articles published by the members of the Service together with a short bibliographic review of each one. In 1914, he became chief of the Service, and after 14 years, was able to overcome all the obstacles and to extend and modernize the surgery rooms, hospitalization wards and examination resources. In 1931, once the changes were made, he began important clinical and scientific activity, and constituted one of the principal urological schools of the first half of the XXth century in our country. The prestige reached by the Urology Unit of the Hospital Provincial of Madrid attracted patients from all over Spain, many of them treated or operated on in their place of origin. This explains why the condition was complicated with some acceptable results. The quality and honesty of the Urology unit justify its qualification. The works in general are mere reviews and those regarding surgery of the uretero-intestinal shunt stand out. Copyright © 2011 AEU. Published by Elsevier Espana. All rights reserved.

Maternal diet, prenatal exposure to dioxin-like compounds and birth outcomes in a European prospective mother-child study (NewGeneris).

PubMed

Papadopoulou, Eleni; Kogevinas, Manolis; Botsivali, Maria; Pedersen, Marie; Besselink, Harrie; Mendez, Michelle A; Fleming, Sarah; Hardie, Laura J; Knudsen, Lisbeth E; Wright, John; Agramunt, Silvia; Sunyer, Jordi; Granum, Berit; Gutzkow, Kristine B; Brunborg, Gunnar; Alexander, Jan; Meltzer, Helle Margrete; Brantsæter, Anne Lise; Sarri, Katerina; Chatzi, Leda; Merlo, Domenico F; Kleinjans, Jos C; Haugen, Margaretha

2014-06-15

Maternal diet can result in exposure to environmental contaminants including dioxins which may influence foetal growth. We investigated the association between maternal diet and birth outcomes by defining a dioxin-rich diet. We used validated food frequency questionnaires to assess the diet of pregnant women from Greece, Spain, United Kingdom, Denmark and Norway and estimated plasma dioxin-like activity by the Dioxin-Responsive Chemically Activated LUciferase eXpression (DR-CALUX®) bioassay in 604 maternal blood samples collected at delivery. We applied reduced rank regression to identify a dioxin-rich dietary pattern based on dioxin-like activity (DR-CALUX®) levels in maternal plasma, and calculated a dioxin-diet score as an estimate of adherence to this dietary pattern. In the five country population, dioxin-diet score was characterised by high consumption of red and white meat, lean and fatty fish, low-fat dairy and low consumption of salty snacks and high-fat cheese, during pregnancy. The upper tertile of the dioxin-diet score was associated with a change in birth weight of -121g (95% confidence intervals: -232, -10g) compared to the lower tertile after adjustment for confounders. A small non-significant reduction in gestational age was also observed (-1.4days, 95% CI: -3.8, 1.0days). Our results suggest that maternal diet might contribute to the exposure of the foetus to dioxins and dioxin-like compounds and may be related to reduced birth weight. More studies are needed to develop updated dietary guidelines for women of reproductive age, aiming to the reduction of dietary exposure to persistent organic pollutants as dioxins and dioxin-like compounds. Copyright © 2014 Elsevier B.V. All rights reserved.

[Five years after the Spanish neonatal resuscitation survey. Are we improving?].

PubMed

Iriondo, M; Izquierdo, M; Salguero, E; Aguayo, J; Vento, M; Thió, M

2016-05-01

An analysis is presented of delivery room (DR) neonatal resuscitation practices in Spanish hospitals. A questionnaire was sent by e-mail to all hospitals attending deliveries in Spain. A total of 180 questionnaires were sent, of which 155 were fully completed (86%). Less than half (71, 46%) were level i or ii hospitals, while 84 were level iii hospital (54%). In almost three-quarters (74.2%) of the centres, parents and medical staff were involved in the decision on whether to start resuscitation or withdraw it. A qualified resuscitation team (at least two members) was available in 80% of the participant centres (63.9% level i-ii, and 94.0% level iii, P<.001). Neonatal resuscitation courses were held in 90.3% of the centres. The availability of gas blenders, pulse oximeters, manual ventilators, and plastic wraps was higher in level iii hospitals. Plastic wraps for pre-term hypothermia prevention were used in 63.9% of the centres (40.8% level i-iiand 83.3% level iii, P<.001). Term newborn resuscitation was started on room air in 89.7% of the centres. A manual ventilator (T-piece) was the device used in most cases when ventilation was required (42.3% level i-iiand 78.6% level iii, P<.001). Early CPAP in preterm infants was applied in 91.7% of the tertiary hospitals. In last 5 years some practices have improved, such neonatal resuscitation training, pulse oximeter use, or early CPAP support. There is an improvement in some practices of neonatal resuscitation. Significant differences have been found as regards the equipment or practices in the DR, when comparing hospitals of different levels of care. Copyright © 2015 Asociación Española de Pediatría. Published by Elsevier España, S.L.U. All rights reserved.

Expression Analysis of Dopamine Receptor Subtypes in Normal Human Pituitaries, Nonfunctioning Pituitary Adenomas and Somatotropinomas, and the Association between Dopamine and Somatostatin Receptors with Clinical Response to Octreotide-LAR in Acromegaly

PubMed Central

Neto, Leonardo Vieira; Machado, Evelyn de O.; Luque, Raul M.; Taboada, Giselle F.; Marcondes, Jorge B.; Chimelli, Leila M. C.; Quintella, Leonardo Pereira; Niemeyer, Paulo; de Carvalho, Denise P.; Kineman, Rhonda D.; Gadelha, Mônica R.

2009-01-01

Context: Dopamine receptor (DR) and somatostatin receptor subtype expression in pituitary adenomas may predict the response to postsurgical therapies. Objectives: Our objectives were to assess and compare the mRNA levels of DR1-5 and somatostatin receptors 1–5 in normal pituitaries (NPs), nonfunctioning pituitary adenomas (NFPAs), and somatotropinomas. In addition, we determined whether the level of DR expression correlates with the in vivo response to octreotide-LAR in acromegalic patients. Design and Patients: Eight NPs, 30 NFPAs, and 39 somatotropinomas were analyzed for receptor mRNA levels by real-time RT-PCR. The DR2 short variant was estimated as the DR2 long/DR2 total (DR2T). The relationship between DR expression and the postsurgical response to octreotide-LAR was assessed in 19 of the acromegalic patients. Results: DR3 was not detected. The relationship between expression levels of DR subtypes in NPs and somatotropinomas was DR2T⋙DR4≫DR5>DR1, whereas in NFPAs, DR2T⋙DR4≫DR1>DR5. The DR2 short variant was the predominant DR2 variant in the majority of samples. In acromegalics treated with octreotide-LAR, DR1 was negatively correlated with percent GH reduction (3 months: r = −0.67, P = 0.002; and 6 months: r = −0.58, P = 0.009), and DR5 was positively correlated with percent IGF-I reduction (3 months: r = 0.55, P = 0.01; and 6 months: r = 0.47, P = 0.04). Conclusions: DR2 is the predominant DR subtype in NPs, NFPAs, and somatotropinomas. The fact that DR1, DR4, and DR5 are also expressed in many adenomas tested suggests that these receptors might also play a role in the therapeutic impact of postsurgical medical therapies in patients with NFPA and acromegaly. This was supported by the finding that the in vivo response to octreotide-LAR was negatively associated with DR1 and positively associated with DR5. PMID:19293270

10.2 Thermal-Structural Testing

NASA Technical Reports Server (NTRS)

Hudson, Larry D.

2008-01-01

Objective: Test a C/SiC Ruddervator Subcomponent under relevant thermal, mechanical & dynamic loading a) Thermal-structural mission cycling for re-entry and hypersonic cruise conditions; b) High-temperature modal survey to study the effect of heating on mode shapes, natural frequencies and damping. Supports NASA ARMD Hypersonics Material & Structures Program. Partners: NASA Dryden / Langley / Glenn, Lockheed-Martin, Materials Research & Design, GE CCP Test Phases - Phase 1: Acoustic-Vibration Testing (LaRC) completed - Phase 2: Thermal-Mechanical Testing (DFRC) in assembly - Phase 3: Mechanical Testing (DFRC) in assembly

Notes on the plasma resonance peak employed to determine doping in SiC

DOE PAGES

Engelbrecht, J. A. A.; van Rooyen, I. J.; Henry, A.; ...

2015-07-23

In this study, the doping level of a semiconductor material can be determined using the plasma resonance frequency to obtain the carrier concentration associated with doping. This paper provides an overview of the procedure for the three most common polytypes of SiC. Results for 3C-SiC are presented and discussed. In phosphorus doped samples analysed, it is submitted that the 2nd plasma resonance cannot be detected due to high values of the free carrier damping constant γ.

Method for Growing Low-Defect Single Crystal Heteroepitaxial Films

NASA Technical Reports Server (NTRS)

Powell, J. Anthony (Inventor); Neudeck, Philip G. (Inventor)

2002-01-01

A method is disclosed for growing high-quality low-defect crystal films heteroepitaxially on substrates that are different than the crystal films. The growth of the first two heteroepitaxial bilayers is performed on a first two-dimensional nucleate island before a second growth of two-dimensional nucleation is allowed to start. The method is particularly suited for the growth of 3C-SiC, 2H-AlN, or 2H-GaN on 6H-SiC, 4H-SiC, or silicon substrates.

Analysis of Textile Composite Structures Subjected to High Temperature Oxidizing Environment

DTIC Science & Technology

2010-08-01

process in a polymer is a combination of the diffusion of oxygen and its consumption by reaction, which also results in the creation of by-products...based on the work by Pochiraju et al[24-26] in which they used the conservation of mass law for diffusion with a term to model the rate of consumption ...Oxidation of C/SiC Composites, Proceedings of the 21st Annual Conference on Composites, Advanced Ceramics Materials and Structures, Cocoa Beach

Toward New Horizons. Volume 10. Explosives and Terminal Ballistics

DTIC Science & Technology

1946-05-01

DuBridge Dr. W. J. Sweeney Dr. Pol Duwez Dr. H. S. Tsien Dr. G. Gamow Dr. G. E. Valley Dr. I. A. Getting Dr. F. L. Wattendorf Dr. L. P. Hammett Dr. F...can be calculated, if the heat quantities for the explosive are known, and some assumptions are made concerning the equation of the state of the

Factors associated with knowledge, attitude and practice related to hepatitis B and C among international students of Universiti Putra Malaysia.

PubMed

Ahmad, Abdulrahman; Munn Sann, Lye; Abdul Rahman, Hejar

2016-07-21

Knowledge of hepatitis B and C has been reported to be low among respondents in different studies. We conducted a cross-sectional study among international students of Universiti Putra Malaysia (UPM) to ascertain their levels of knowledge, attitude and practices regarding hepatitis B and C and its associated factors. Six hundred and sixty two (662) international students participated in this study. A cluster sampling method was employed and data was generated using self-administered questionnaire, which was validated and its reliability checked. Normality test was conducted followed by descriptive statistics, spearman's correlation and Chi-square tests to explore associations between variables in the study. The response rate was 71.49 %. Of these, 50.3 % of the respondents had better knowledge of hepatitis B; 52.7 % had better knowledge of hepatitis C; 54.8 % had positive attitude towards hepatitis B and C and 77.6 % had safer practices towards hepatitis B and C. Positive correlations were found between knowledge of hepatitis B and knowledge of hepatitis C; knowledge hepatitis B and attitude; knowledge hepatitis C and attitude; knowledge hepatitis B and practice; knowledge hepatitis C and practice; and attitude and practice regarding hepatitis B and C. Similarly, some socio-demographic variables and history of hepatitis were found to be associated with knowledge, attitude and practice related to hepatitis B and C. The levels of knowledge and attitude towards hepatitis B and C were low among respondents but majority of them exhibited safe practices. The study level, faculty, age, nationality, marital status and gender of the respondents were significantly associated with their levels of knowledge, attitude and practices towards the disease. These findings imply that there is need for hepatitis health promotion among the international students of UPM and possibly other international students across the globe. It will serve to improve their levels of knowledge, attitude and practices in short term and get them protected against the disease in the long run.

Progressively implementation of the new degrees at E.T.S. of Agriculture Engineering and extinction of the earlier degrees

NASA Astrophysics Data System (ADS)

Arce, A.; Caniego, J.; Vazquez, J.; Serrano, A.; Tarquis, A. M.; Cartagena, M. C.

2012-04-01

The Bologna process is to improve the quality of education, mobility, diversity and the competitiveness and involves three fundamental changes: transform of the structure of titles, changing in methods of teaching and implementation of the systems of quality assurance. Once that the new degrees have been implemented with this structure, and began at E.T.S. of Agriculture Engineering (ETSIA) at Madrid from 2010-2011 course, the main aim of this work is to deeply study the changes in teaching methodology as well as progressively implementation of the educational planning of the three new degrees: Engineering and Agronomic Graduate, Food Industry Engineering Graduate and Agro-environmental Graduate. Each one of them presents 240 ECTS with a common first course and will have access to an official Master in Agronomic Engineering. As part as an educational innovation project awarded by the Technical University of Madrid (UPM) to improve educational quality, the second course has been designed with the main objective to continue the educative model implemented last course. This model identifies several teaching activities and represents a proper teaching style at ETSIA-UPM. At the same time, a monitoring and development coordination plans have been established. On the other hand, a procedure to extinguish the earlier plans of Agriculture Engineering was also defined. Other activities related to this Project were the information improvement of the grades, in particular at High Schools centers, improving the processes of reception, counseling and tutoring and mentoring. Likewise, cooperative working workshops and programs to support the teaching of English language were implemented. Satisfaction surveys and opinion polls were done to professors and students involved in first course in order to test several aspects of this project. The students surveys were analyzed taking in account the academic results and their participation in mentoring activities giving a highly satisfactory level. In general, the professors gave the same result although they pointed out certain discontent respect to some circumstances giving some solutions to correct these problems.

Student Mentors' system in the Higher European Education

NASA Astrophysics Data System (ADS)

Saa-Requejo, Antonio; Medina-Rojas, Silvia; Sanchez, Maria Elena; Gascó, Gabriel; Moratiel, Ruben; Antón, Jose Manuel; Durán-Altisent, Jose Maria; Tarquis, Ana Maria

2013-04-01

For several years the Spanish University has been experiencing changes that affect not only the educational area but also innovation and investigation in the classroom. Even the use of so-called New Technologies has been focus of much attention in the Higher Educational System, student mentoring has been revealed as an important factor in the first university courses. In this sense, we carried out a first step in a senior student mentor project in order to facilitate adaptation of the new students, providing information, advice and guidance on different academic and social aspects. Here, we understand mentoring as a relationship between a more senior student (mentor) and a few junior lesser experienced students (mentees). Mentoring is intended to develop and grow the skills, knowledge, confidence, and cultural understanding of the mentees aiming to help them succeed. Consequently, this work arises from our concern about students need. A test has been designed to assess students interest in the three fundamental aspects of mentoring: academic, social and administrative orientation. The test involved 16 questions related to these three different aspects on mentoring, evaluating each question from 1 (none) to 4 (totally). Surveys have been conducted on this topic at the Universidad Politécnica de Madrid (UPM) with students on different levels and modules of degrees in Agricultural Engineering. The same activity has been applied to the new degrees that have started at 2010-11 course in the Bologna Plan's requirements and are replacing the precedents progressively. We have analysed the answers performing a multifactor analysis of variance for each question. It constructs various tests and graphs to determine which questions have statistically significant interactions, given sufficient data. The F-tests in the ANOVA table allowed identifying the significant ones. For each significant factor, the Multiple Range Tests (MRT) tells which means are significantly different from which others. We have applied it to Bologna Plan and Plan 96 separately. The results are discussed. Acknowledgements Funded provided by educational innovation projects "Training of mentors' students in different subjects in the first degree and postgraduate ETSI Agrónomos" and "Students mentoring system in undergraduate and graduate courses at ETS Ingenieros Agrónomos" given by UPM are gratefully appreciated.

Occurrence of H2-Uptake Hydrogenases in Bradyrhizobium sp. (Lupinus) and Their Expression in Nodules of Lupinus spp. and Ornithopus compressus1

PubMed Central

Murillo, Jesús; Villa, Ana; Chamber, Manuel; Ruiz-Argüeso, Tomás

1989-01-01

Fifty-four strains of Bradyrhizobium sp. (Lupinus) from worldwide collections were screened by a colony hybridization method for the presence of DNA sequences homologous to the structural genes of the Bradyrhizobium japonicum hydrogenase. Twelve strains exhibited strong colony hybridization signals, and subsequent Southern blot hybridization experiments showed that they fell into two different groups on the basis of the pattern of EcoRI fragments containing the homology to the hup probe. All strains in the first group (UPM860, UPM861, and 750) expressed uptake hydrogenase activity in symbiosis with Lupinus albus, Lupinus angustifolius, Lupinus luteus, and Ornithopus compressus, but both the rate of H2 uptake by bacteroids and the relative efficiency of N2 fixation (RE = 1 - [H2 evolved in air/acetylene reduced]) by nodules were markedly affected by the legume host. L. angustifolius was the less permissive host for hydrogenase expression in symbiosis with the three strains (average RE = 0.76), and O. compressus was the more permissive (average RE = 1.0). None of the strains in the second group expressed hydrogenase activity in lupine nodules, and only one exhibited low H2-uptake activity in symbiosis with O. compressus. The inability of these putative Hup+ strains to induce hydrogenase activity in lupine nodules is discussed on the basis of the legume host effect. Among the 42 strains showing no homology to the B. japonicum hup-specific probe in the colony hybridization assay, 10 were examined in symbiosis with L. angustifolius. The average RE for these strains was 0.51. However, one strain, IM43B, exhibited high RE values (higher than 0.80) and high levels of hydrogenase activity in symbiosis with L. angustifolius, L. albus, and L. luteus. In Southern blot hybridization experiments, no homology was detected between the B. japonicum hup-specific DNA probe and total DNA from vegetative cells or bacteroids from strain IM43B even under low stringency hybridization conditions. We conclude from these results that strain IM43B contains hup DNA sequences different from those in B. japonicum and in other lupine rhizobia strains. Images Figure 1 Figure 2 PMID:16666550

WIS Implementation Study Report. Volume 1. Main Report.

DTIC Science & Technology

1983-10-01

Luenberger, Prof. David G. * Stanford University Ries, Dr. Daniel R. * Computer Corporation of America Schill, John Naval Ocean Systems Center Shrier , Dr...Robert E. 43 Kaczmarek, Dr. Thomas S. 45 Klein, Dr. Stanely A. 47 Kramer, Dr. John F. 49 Larsen, Dr. Robert E. 55 Luenberger, Prof. David G. 58...Riddle, Dr. William E. 76 Ries, Dr. Daniel R. 82 Sapp, Mr. John W. 88 Shelley, Mr. Stephen H. 89 Shrier , Dr. Stefan 94 Slusarczuk, Dr. Marko M.G. 96

Mathematical Decision Models Applied for Qualifying and Planning Areas Considering Natural Hazards and Human Dealing

NASA Astrophysics Data System (ADS)

Anton, Jose M.; Grau, Juan B.; Tarquis, Ana M.; Sanchez, Elena; Andina, Diego

2014-05-01

The authors were involved in the use of some Mathematical Decision Models, MDM, to improve knowledge and planning about some large natural or administrative areas for which natural soils, climate, and agro and forest uses where main factors, but human resources and results were important, natural hazards being relevant. In one line they have contributed about qualification of lands of the Community of Madrid, CM, administrative area in centre of Spain containing at North a band of mountains, in centre part of Iberian plateau and river terraces, and also Madrid metropolis, from an official study of UPM for CM qualifying lands using a FAO model from requiring minimums of a whole set of Soil Science criteria. The authors set first from these criteria a complementary additive qualification, and tried later an intermediate qualification from both using fuzzy logic. The authors were also involved, together with colleagues from Argentina et al. that are in relation with local planners, for the consideration of regions and of election of management entities for them. At these general levels they have adopted multi-criteria MDM, used a weighted PROMETHEE, and also an ELECTRE-I with the same elicited weights for the criteria and data, and at side AHP using Expert Choice from parallel comparisons among similar criteria structured in two levels. The alternatives depend on the case study, and these areas with monsoon climates have natural hazards that are decisive for their election and qualification with an initial matrix used for ELECTRE and PROMETHEE. For the natural area of Arroyos Menores at South of Rio Cuarto town, with at North the subarea of La Colacha, the loess lands are rich but suffer now from water erosions forming regressive ditches that are spoiling them, and use of soils alternatives must consider Soil Conservation and Hydraulic Management actions. The use of soils may be in diverse non compatible ways, as autochthonous forest, high value forest, traditional farms, erosion control crops with agro or with more bio-mass crops, for the Chaco Salteño area where irrigation is convenient and available near some rivers. The election of water management entities was also considered resulting here in favour of Cooperatives. For general elections for La Colacha the criteria include environmental criteria measuring erosions, economic criteria, and social criteria sets. The results were offered for effective planning and handling, done at various levels, publics and private, emphasizing long term land conservation and human results. References exist in Spain or in Spanish Argentine literature, and general references, let note about Decision Theory: (1) Grau, J. B., Antón, J.M., Tarquis A. M., Andina, D. Election of water Resources Management Entity using a Multi-criteria decision (MCD) Method in Salta Province (Argentine)". CITSA 2008, Orlando 29 June-2 July, 2008. (2) Roy, B., D. Bouyssou. Aidé Multicritère à la Décision: Méthodes et cas. Economica, Paris 1993. (3) Saaty, T. The Analytic Hierarchy Process, Mac Graw-Hill, New York, 1980.

2011 Presidential Early Career Awards for Scientists and Engineers: the PECASE Awards Ceremony

ScienceCinema

Poneman, Daniel

2018-05-31

The winners for 2011 of the DOE PECASE Awards were recognized in a ceremony held August 01, 2012. Dr. Bill Brinkman, Director of the Office of Science introduced the main speaker, DOE Deputy Secretary Daniel B. Poneman. Leaders from across the Department and the fields of energy research and technology presented the 2011 winners. They are: Dr. Stanley Atcitty (SNL); Dr. Jeffrey W. Banks (LLNL); Dr. Amy J. Clarke (LANL); Derek R. Gaston (INL); Dr. Christopher Hirata (California Institute of Technology); Dr. Heileen Hsu-Kim (Duke University); Dr. Thomas Francisco (Jaramillo Stanford University); Dr.Pablo Jarillo-Herrero (MIT); Dr. Peter Mueller (ANL); Dr. Daniel B. Sinars (SNL); Dr. Jesse Thaler (MIT); and Dr. Heather Whitley (LLNL).

2011 Presidential Early Career Awards for Scientists and Engineers: the PECASE Awards Ceremony

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poneman, Daniel

2012-08-01

The winners for 2011 of the DOE PECASE Awards were recognized in a ceremony held August 01, 2012. Dr. Bill Brinkman, Director of the Office of Science introduced the main speaker, DOE Deputy Secretary Daniel B. Poneman. Leaders from across the Department and the fields of energy research and technology presented the 2011 winners. They are: Dr. Stanley Atcitty (SNL); Dr. Jeffrey W. Banks (LLNL); Dr. Amy J. Clarke (LANL); Derek R. Gaston (INL); Dr. Christopher Hirata (California Institute of Technology); Dr. Heileen Hsu-Kim (Duke University); Dr. Thomas Francisco (Jaramillo Stanford University); Dr.Pablo Jarillo-Herrero (MIT); Dr. Peter Mueller (ANL); Dr.more » Daniel B. Sinars (SNL); Dr. Jesse Thaler (MIT); and Dr. Heather Whitley (LLNL).« less

Scanning electron microscopy of the surfaces of ion implanted SiC

NASA Astrophysics Data System (ADS)

Malherbe, Johan B.; van der Berg, N. G.; Kuhudzai, R. J.; Hlatshwayo, T. T.; Thabethe, T. T.; Odutemowo, O. S.; Theron, C. C.; Friedland, E.; Botha, A. J.; Wendler, E.

2015-07-01

This paper gives a brief review of radiation damage caused by particle (ions and neutrons) bombardment in SiC at different temperatures, and its annealing, with an expanded discussion on the effects occurring on the surface. The surface effects were observed using SEM (scanning electron microscopy) with an in-lens detector and EBSD (electron backscatter diffraction). Two substrates were used, viz. single crystalline 6H-SiC wafers and polycrystalline SiC, where the majority of the crystallites were 3C-SiC. The surface modification of the SiC samples by 360 keV ion bombardment was studied at temperatures below (i.e. room temperature), just at (i.e. 350 °C), or above (i.e. 600 °C) the critical temperature for amorphization of SiC. For bombardment at a temperature at about the critical temperature an extra step, viz. post-bombardment annealing, was needed to ascertain the microstructure of bombarded layer. Another aspect investigated was the effect of annealing of samples with an ion bombardment-induced amorphous layer on a 6H-SiC substrate. SEM could detect that this layer started to crystalize at 900 °C. The resulting topography exhibited a dependence on the ion species. EBSD showed that the crystallites forming in the amorphized layer were 3C-SiC and not 6H-SiC as the substrate. The investigations also pointed out the behaviour of the epitaxial regrowth of the amorphous layer from the 6H-SiC interface.

Optimization of self-interstitial clusters in 3C-SiC with genetic algorithm

NASA Astrophysics Data System (ADS)

Ko, Hyunseok; Kaczmarowski, Amy; Szlufarska, Izabela; Morgan, Dane

2017-08-01

Under irradiation, SiC develops damage commonly referred to as black spot defects, which are speculated to be self-interstitial atom clusters. To understand the evolution of these defect clusters and their impacts (e.g., through radiation induced swelling) on the performance of SiC in nuclear applications, it is important to identify the cluster composition, structure, and shape. In this work the genetic algorithm code StructOpt was utilized to identify groundstate cluster structures in 3C-SiC. The genetic algorithm was used to explore clusters of up to ∼30 interstitials of C-only, Si-only, and Si-C mixtures embedded in the SiC lattice. We performed the structure search using Hamiltonians from both density functional theory and empirical potentials. The thermodynamic stability of clusters was investigated in terms of their composition (with a focus on Si-only, C-only, and stoichiometric) and shape (spherical vs. planar), as a function of the cluster size (n). Our results suggest that large Si-only clusters are likely unstable, and clusters are predominantly C-only for n ≤ 10 and stoichiometric for n > 10. The results imply that there is an evolution of the shape of the most stable clusters, where small clusters are stable in more spherical geometries while larger clusters are stable in more planar configurations. We also provide an estimated energy vs. size relationship, E(n), for use in future analysis.

Progressive Failure And Life Prediction of Ceramic and Textile Composites

NASA Technical Reports Server (NTRS)

Xue, David Y.; Shi, Yucheng; Katikala, Madhu; Johnston, William M., Jr.; Card, Michael F.

1998-01-01

An engineering approach to predict the fatigue life and progressive failure of multilayered composite and textile laminates is presented. Analytical models which account for matrix cracking, statistical fiber failures and nonlinear stress-strain behavior have been developed for both composites and textiles. The analysis method is based on a combined micromechanics, fracture mechanics and failure statistics analysis. Experimentally derived empirical coefficients are used to account for the interface of fiber and matrix, fiber strength, and fiber-matrix stiffness reductions. Similar approaches were applied to textiles using Repeating Unit Cells. In composite fatigue analysis, Walker's equation is applied for matrix fatigue cracking and Heywood's formulation is used for fiber strength fatigue degradation. The analysis has been compared with experiment with good agreement. Comparisons were made with Graphite-Epoxy, C/SiC and Nicalon/CAS composite materials. For textile materials, comparisons were made with triaxial braided and plain weave materials under biaxial or uniaxial tension. Fatigue predictions were compared with test data obtained from plain weave C/SiC materials tested at AS&M. Computer codes were developed to perform the analysis. Composite Progressive Failure Analysis for Laminates is contained in the code CPFail. Micromechanics Analysis for Textile Composites is contained in the code MicroTex. Both codes were adapted to run as subroutines for the finite element code ABAQUS and CPFail-ABAQUS and MicroTex-ABAQUS. Graphic user interface (GUI) was developed to connect CPFail and MicroTex with ABAQUS.

VOSA: SED building and analysis of thousands of stars in the framework of Gaia

NASA Astrophysics Data System (ADS)

Rodrigo, C.; Solano, E.; Bayo, A.

2014-07-01

VOSA (http://svo2.cab.inta-csic.es/theory/vosa/), is a web-based tool designed to combine private photometric measurements with data available in VO services distributed worldwide to build the observational spectral energy distributions (SEDs) of hundreds of objects. VOSA also accesses various collections of models to simulate the equivalent theoretical SEDs, allows the user to decide the range of physical parameters to explore, performs the SED comparison, provides the best fitting models to the user following two different approaches (chi square and Bayesian fitting), and, for stellar sources, compares these parameters with isochrones and evolutionary tracks to estimate masses and ages. In particular, VOSA offers the advantage of deriving physical parameters using all the available photometric information instead of a restricted subset of colors. VOSA was firstly released in 2008 and its functionalities are described in Bayo et al. (2008). At the time of writing there are more than 300 active users in VOSA who have published more than 60 refereed papers. In the framework of the GENIUS (https://gaia.am.ub.es/Twiki/bin/view/GENIUS) project we are upgrading VOSA to, on one hand, provide a seamless access to Gaia data and, on the other hand, handle thousands of objects at a time. In this poster, the main functionalities to be implemented in the Gaia context will be described. The poster can be found at: http://svo.cab.inta-csic.es/files/svo//Public/SVOPapers/posters/vosa-poster3.pdf.

Ten years of "Optimal Therapy in Advanced Ovarian Cancer. Update" meeting.

PubMed

Poveda, A

2008-01-01

The International Symposium on Advanced Ovarian Cancer: Optimal Therapy was founded by Dr. Andrés Poveda and Prof. Jan B. Vermorken, and each edition has been directed by them. The 6th edition was held on March 2, 2007. This symposium is organized every other year by GEICO (Grupo Español de Investigación de Cáncer de Ovario/Spanish Ovarian Cancer Research Group), under the auspices of the Spanish Society of Medical Oncology (SEOM), the Gynecologic Cancer Intergroup (GCIG), and the European Society of Medical Oncology (ESMO) Educational Committee for its Medical Oncology Recertification Approval (ESMO/MORA) Program. One hundred and fifty people attended the symposium's 1st edition, held in 1996. Since then, the interest in this meeting has increased. Last year, almost three hundred people coming not only from Spain but also from Europe, North and Latin America, Asia, and Australia were present in the symposium. This is a great challenge for us. Some important international cooperative groups from Europe, America, and Australia collaborate with this symposium, such as GOG, NCIC, EORTC, AGO, Scottish Group, ICON, GINECO, NSGO, ANZGOG, and others.

Multifractal characteristics of NDVI maps in space and time in the Community of Madrid (Spain)

NASA Astrophysics Data System (ADS)

Sotoca, Juan J. Martin; Saa-Requejo, Antonio; Grau, Juan B.; Tarquis, Ana M.

2015-04-01

Satellite information has contributed to improve our understanding of the spatial variability of hydro-climatic and ecological processes. Vegetation activity is tightly coupled with climate, hydro-ecological fluxes, and terrain dynamics in river basins at a wide range of space-time scales (Scheuring and Riedi, 1994). Indices of vegetation activity are constructed using satellite information of reflectance of the relevant spectral bands which enhance the contribution of vegetation being Normalized Difference Vegetation Index (NDVI) widely used. How can we study such a complex system? Multifractals and fractals are related techniques mainly used in physics to characterize the scaling behaviour of a system; they differ in that fractals look at the geometry of presence/absence patterns, while multifractals look at the arrangement of quantities such as population or biomass densities (Saravia et al., 2012). Scaling laws are an emergent general feature of ecological systems; they reflect constraints in their organization that can provide tracks about the underlying mechanisms (Solé and Bascompte, 2006). In this work, we have applied these techniques to study the spatial pattern through one year of NDVI maps. A rectangular area that includes the Community of Madrid and part of the surroundings, consisting of 300 x 280 pixels with a resolution of 500 x 500 m2 has been selected and monthly NDVI maps analyzed using the multifractal spectrum and the map of singularities (Cheng and Agterberg, 1996). The results show a cyclical pattern in the multifractal behaviour and singularity points related to river basin networks (Martín-Sotoca, 2014). References Cheng, Q. and Agterberg, F.P. (1996). Multifractal modeling and spatial statistics. Math. Geol. Vol 28, 1-16. Martín-Sotoca, J.J. (2014) Estructura Espacial de la Sequía en Pastos y sus Aplicaciones en el Seguro Agrario. Master Thesis, UPM (In Spanish). Saravia LA, Giorgi A, Momo F.: Multifractal growth in periphyton communities. Oikos. 2012;121(11):1810-1820 10.1111/j.1600-0706.2011.20423.x Scheuring, I., Riedi, R.H., 1994. Application of multifractals to the analysis of vegetation pattern. J. Veg. Sci. 5, 489-496. Solé RV, Bascompte J.: Self-organization in complex ecosystems. Princeton University Press,2006. Acknowledgements First author acknowledges the Research Grant obtained from CEIGRAM in 2014

Integrated Cognition - A Proposed Definition of Ingredients, A Survey of Systems, and Example Architecture

DTIC Science & Technology

2004-10-01

Information Proc- essing Technology Office (IPTO) for their support of this work. We thank Dr. John Salasin for his vision in conceiving these...ingredients of cognition identified in the INCOG framework presented herein, including: Dr. John R. Anderson, Mr. Albert-Laszlo Barabasi, Dr...Goertzel, Professor Marvin Minsky, Dr. Robert Hecht-Nielsen, Dr. Marcus J. Huber, Dr. John Laird, Professor Pat Langley, Dr. Christian Lebiere, Dr

Association of HLA-DR1 with the allergic response to the major mugwort pollen allergen: molecular background.

PubMed

Knapp, Bernhard; Fischer, Gottfried; Van Hemelen, Dries; Fae, Ingrid; Maillere, Bernard; Ebner, Christof; Schreiner, Wolfgang; Bohle, Barbara; Jahn-Schmid, Beatrice

2012-08-08

Mugwort pollen allergens represent the main cause of pollinosis in late summer. The major allergen, Art v 1, contains only one single immunodominant, solely HLA-DR-restricted T cell epitope (Art v 125-36). The frequency of HLA-DRB1*01 is highly increased in mugwort-allergic individuals and HLA-DR1 serves as restriction element for Art v 125-36. However, Art v 125-36 also binds to HLA-DR4 with high affinity and DR1-restricted Art v 125-36 -specific T cell receptors can be activated by HLA-DR4 molecules. To understand the predominance of HLA-DR1 in mugwort allergy in spite of the degeneracy in HLA/peptide-binding and TCR-recognition, we investigated the molecular background of Art v 125-36 /MHC/TCR interactions in the context of HLA-DR1 compared to -DR4. The majority of Art v 125-36 -specific T cell lines and clones from HLA-DR1 carrying, mugwort pollen-allergic donors reacted to synthetic and naturally processed Art v 1-peptides when presented by HLA-DR1 or HLA-DR4 expressing antigen presenting cells. However, at limiting peptide concentrations DR1 was more effective in T cell stimulation. In addition, the minimal epitope for 50% of Art v 125-36 -specific T cells was shorter for DR1 than for DR4. In vitro binding assays of Art v 125-36 mutant peptides to isolated DR1- and DR4-molecules indicated similar binding capacities and use of the same register. In silico simulation of Art v 125-36 binding to HLA-DR1 and -DR4 suggested similar binding of the central part of the peptide to either molecule, but a higher flexibility of the N- and C-terminal amino acids and detachment at the C-terminus in HLA-DR1. The predominance of HLA-DR1 in the response to Art v 125-36 may be explained by subtle conformation changes of the peptide bound to DR1 compared to DR4. Computer simulation supported our experimental data by demonstrating differences in peptide mobility within the HLA-DR complex that may influence TCR-binding. We suggest that the minor differences observed in vitro may be more relevant in the microenvironment in vivo, so that only presentation by HLA-DR1, but not -DR4 permits successful T cell activation.

Study of Nox Levels At The Castellon Area (spain) By Means of Passive Samplers

NASA Astrophysics Data System (ADS)

Delgado, J. M.; Esteve, V.

Nitrogen oxides are emitted by mobile sources like traffic, heating engines and indus- tries. In the case of La Plana de Castellon area, the cities, the industrial area called El Serrallo (with its oil refinery and power plant), the tile factories and the main roads (A7-E15 and N-340), all they are the main pollutant focus of NOx. Those pollutants are precursors of tropospheric ozone formation. The aim of this work is the study of nitrogen oxides levels in La Plana de Castellon area, by means of passive samplers and stand relationships between NOx levels and ozone levels both measured with pas- sive samplers. The measurement campaign is made during summer, the higher pho- tochemical activity period (from May to September) in order to obtain the necessary data of NOx levels to make the relationship with measured ozone levels. Measuring campaing has been divided into sampling periods of one week. Twelve samples are collected each sampling period to cover an interest area of 1400 Km2, Two of these samples are laboratory blanks, four are situated at reference points (beside an auto- matic NOx sampler), one is situated at A7-E15 expressway, other at the main road N-340 and another one in a hard traffic road. The other three are placed in the main cities (Castellon and Benicassim). We employ Radielloo samplers developed by Dr. Cocheo at Fondazione Salvatore Maugeri. Samples located far from the main roads, at countryside show the lowest levels of NOx, lower than 10 ppb. Samples located at Castellon city show a difference between downtown and boundaries of about 33% higher at downtown, raising from 11 ppb to 14,5 ppb of NOx. The highest levels of NOx are measured at roads and their surroundings with medium levels of 14,3 ppb of NOx. Moreover, the sample located close to the expressway raises its level until 18 ppb of NOx, 53,4% higher than the media of all the samples measured. We would like to thank Dr. M. Wolfson(Harvard University), Dr. Carlos Felis (Conselleria de Medi Ambient) and Ms. C. Clemente for their contribution and work on this project as well as to Generalitat Valenciana for the FPI grant.

The HLA-DRB9 gene and the origin of HLA-DR haplotypes.

PubMed

Gongora, R; Figueroa, F; Klein, J

1996-11-01

HLA-DRB9 is a gene fragment consisting of exon 2 and flanking intron sequences. It is located at the extreme end of the DRB subregion, whose other end is demarcated by the DRB1 locus. We sequenced approximately 1400 base pairs of the segment encompassing the DRB9 locus from eight human haplotypes (DR1, DR10, DR2, DR3, DR5, DR6, DR8, and DR9, the DR4 and DR7 having been sequenced by others earlier), as well as two chimpanzee, five gorillas, one orangutan and one macaque haplotype. The analysis of these sequences indicates that the DRB9 locus, which we estimate to be more than 58 million years (my) old, has been coevolving with the DRB1 locus for the last 4.2 my. As a consequence of this coevolution, the human DRB9 alleles fall into groups that correlate with the DRB1 allelic groups and with the gene organization of the human haplotypes. This observation implies that the present-day HLA-DR haplotype groups (DR1, DR51, DR52, DR8, and DR53) were founded more than 4 my ago and have remained intact (barring minor internal rearrangements that did not recombine the DRB1 and DRB9 genes) for this period of time. The haplotypes have been transmitted during speciations from ancestral to emerging species just like allelic lineages at the DRB1 locus. Thus not only allelic but also haplotype polymorphism evolves trans-specifically.

Peer review statement

NASA Astrophysics Data System (ADS)

2010-08-01

All papers published in this Volume 12 of IOP Conference Series: Earth and Environmental Science have been peer reviewed through processes administered by the editors of the 25th IAHR Symposium on Hydraulic Machinery and Systems proceedings, Professor Romeo Susan-Resiga, Dr Sebastian Muntean and Dr Sandor Bernad. Reviews were conducted by expert referees from the Scientific Committee to the professional and scientific standards expected of a proceedings journal published by IOP Publishing. The members of the Scientific Committee who selected and reviewed the papers included in the Proceedings of the 25th IAHR Symposium on Hydraulic Machinery and Systems are: Anton ANTONTechnical University of Civil Engineering, BucharestRomania François AVELLANEcole Polytechnique Fédérale de LausanneSwitzerland Fidel ARZOLAEDELCAVenezuela Thomas ASCHENBRENNERVoith Hydro Gmb H & Co. KG, HeidenheimGermany Anton BERGANTLitostroj Power d.o.o., LjubljanaSlovenia Gerard BOISENSAM, LilleFrance Hermod BREKKENTNU, TrondheimNorway Stuart COULSON Voith Hydro Inc., YorkUSA Eduard EGUSQUIZAPolytechnical University Catalonia BarcelonaSpain Arpad FAYUniversity of MiskolczHungary Richard FISHERVoith Hydro Inc., York USA Regiane FORTES-PATELLAInstitut Polytechnique de GrenobleFrance Aleksandar GAJICUniversity of BelgradeSerbia Arno GEHRERAndritz Hydro GrazAustria José GONZÁLEZUniversidad de OviedoSpain François GUIBAULTEcole Polytechnique de MontrealCanada Chisachi KATOUniversity of TokyoJapan Kwang-Yong KIMInha University, IncheonKorea Jiri KOUTNIKVoith Hydro Gmb H & Co. KG, HeidenheimGermany Adrian LUNGUDunarea de Jos University of GalatiRomania Christophe NICOLETPower Vision Engineering Sàrl, LausanneSwitzerland Torbjøm K. NIELSENNTNU, TrodheimNorway Michihiro NISHIKyushu Institute of TechnologyJapan Maryse PAGEHydro Quebec IREQ, VarennesCanada Etienne PARKINSONAndritz Hydro LtdSwitzerland František POCHYLYBrno UniversityCzech Republic Stefan RIEDELBAUCHVoith Hydro Gmb H & Co. KG, HeidenheimGermany Albert RUPRECHTUniversity of StuttgartGermany Michel SABOURINAlstom Hydro Canada Inc.Canada Rudolf SCHILLINGTechnische Universität MünchenGermany Qing-Hua SHIDong Fang Electrical Machinery Co.China Aleš SKOTAKCKD Blansko Engineering, a. s.Czech Republic Romeo F. SUSAN-RESIGAPolitehnica University of TimisoaraRomania Geraldo TIAGO FILHOUniversidade Federal de ItajubaBrazil Yoshinobu TSUJIMOTOOsaka UniversityJapan Bart van ESCHTechnische Universiteit EindhovenNetherland Thi C. VUAndritz Hydro Ltd, QuebecCanada Satoshi WATANABEKyushu University, FukuokaJapan Yulin WUTsinghua University, BeijingChina The reviewing process was organized in several steps. First, the 238 abstracts submitted for the symposium were reviewed, and 197 were accepted, with 30 abstracts having recommendations. Second, the authors have submitted 152 full-length papers, and each paper has been reviewed by two referees. The recommendations have been sent back to the authors, in order to prepare the final form or the paper. Third, 118 papers have been received in final form, accounting for the referees recommendations, to be included in the proceedings and to be presented at the symposium.

Epitope Analysis of the Collagen Type V-Specific T Cell Response in Lung Transplantation Reveals an HLA-DRB1*15 Bias in Both Recipient and Donor

PubMed Central

Keller, Melissa R.; Haynes, Lynn D.; Jankowska-Gan, Ewa; Sullivan, Jeremy A.; Agashe, Vrushali V.; Burlingham, Scott R.; Burlingham, William J.

2013-01-01

Background IL-17-dependent cellular immune responses to the α1 chain of collagen type V are associated with development of bronchiolitis obliterans syndrome after lung transplantation, and with idiopathic pulmonary fibrosis and coronary artery disease, primary indications for lung or heart transplantation, respectively. Methodology/Principal Findings We found that 30% of the patients awaiting lung transplantation exhibited a strong cell-mediated immune response to col(V). Of these, 53% expressed HLA-DR15, compared to a 28% HLA-DR15 frequency in col(V) low-responders (p=0.02). After transplantation, patients with HLA-DR1 and -DR17, not -DR15, developed anti-col(V) responses most frequently (p=0.04 and 0.01 vs. controls, respectively). However, recipients of a lung from an HLA-DR15+ donor were at significantly elevated risk of developing anti-col(V) responses (p=0.02) and BOS (p=0.03). To determine the molecular basis of this unusual pattern of DR allele bias, a peptide library comprising the collagenous region of the α1(V) protein was screened for binding to HLA-DR0101, -DR1501, -DR0301 (DR17) or to HLA-DQ2 (DQA1*0501: DQB1*0201; in linkage disequilibrium with -DR17) and -DQ6 (DQA1*0102: DQB1*0602; linked to -DR15). Eight 15-mer peptides, six DR-binding and two DQ-binding, were identified. HLA-DR15 binding to two peptides yielded the highest binding scores: 650 (where 100 = positive control) for p799 (GIRGLKGTKGEKGED), and 193 for p1439 (LRGIPGPVGEQGLPG). These peptides, which also bound weakly to HLA-DR1, elicited responses in both HLA-DR1+ and -DR15+ col(V) reactive hosts, whereas binding and immunoreactivity of p1049 (KDGPPGLRGFPGDRG) was DR15-specific. Remarkably, a col(V)-reactive HLA-DR1+DR15neg lung transplant patient, whose donor was HLA-DR15+, responded not only to p799 and p1439, but also to p1049. Conclusions/Significance HLA-DR15 and IPF disease were independently associated with pre-transplant col(V) autoimmunity. The increased risk of de novo immunity to col(V) and BOS, associated with receiving a lung transplant from an HLA-DR15+ donor, may result from presentation by donor-derived HLA- DR15, of novel self-peptides to recipient T cells. PMID:24265781

7 CFR 319.56-34 - Clementines from Spain.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Clementines from Spain. 319.56-34 Section 319.56-34... Clementines from Spain. Clementines (Citrus reticulata) from Spain may only be imported into the United States... agreement. Clementines from Spain may be imported only if the Government of Spain or its designated...

Analytical Micromechanics Modeling Technique Developed for Ceramic Matrix Composites Analysis

NASA Technical Reports Server (NTRS)

Min, James B.

2005-01-01

Ceramic matrix composites (CMCs) promise many advantages for next-generation aerospace propulsion systems. Specifically, carbon-reinforced silicon carbide (C/SiC) CMCs enable higher operational temperatures and provide potential component weight savings by virtue of their high specific strength. These attributes may provide systemwide benefits. Higher operating temperatures lessen or eliminate the need for cooling, thereby reducing both fuel consumption and the complex hardware and plumbing required for heat management. This, in turn, lowers system weight, size, and complexity, while improving efficiency, reliability, and service life, resulting in overall lower operating costs.

Carbon Fiber Reinforced Ceramic Composites for Propulsion Applications

NASA Technical Reports Server (NTRS)

Shivakumar, Kunigal; Argade, Shyam

2003-01-01

This report presents a critical review of the processing techniques for fabricating continuous fiber-reinforced CMCs for possible applications at elevated temperatures. Some of the issues affecting durability of the composite materials such as fiber coatings and cracking of the matrix because of shrinkage in PIP-process are also examined. An assessment of the potential inexpensive processes is also provided. Finally three potential routes of manufacturing C/SiC composites using a technology that NC A&T developed for carbon/carbon composites are outlined. Challenges that will be encountered are also listed.

MSFC Test Results for Selected Mirrors: Brush-Wellman/Goodrich 0.5 meter Joined-Beryllium Mirror; IABG 0.5 meter C/SiC Mirror; Xinetics 0.5 meter SiC Mirror; and Kodak 0.23 meter SiO2 Mirror

NASA Technical Reports Server (NTRS)

Hadaway, James; Blackwell, Lisa; Matthews, Gary; Eng, Ron; Stahl, Phil; Hraba, John; Thornton, Gary

2002-01-01

The results of cryo tests performed at the XRCF on the above mirrors will be presented. Each mirror was tested from room-temperature to around 30 K. The first three were tested together on a 3-mirror stand in the large chamber using the PhaseCam interferometer, while the Kodak mirror was tested in the small chamber using the EPI interferometer.

1. View of three detection radar (DR) antennas. DR 1 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. View of three detection radar (DR) antennas. DR 1 (structure no. 735) on left, DR 2 (structure no. 736) in center, and DR 3 (structure no. 737) looking north 30 degrees west, with tracking radar (large radome) and satcom (satellite communication) system in small radome in view between DR 2 and DR 3 antennae. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

Diabetic retinopathy and microalbuminuria can predict macroalbuminuria and renal function decline in Japanese type 2 diabetic patients: Japan Diabetes Complications Study.

PubMed

Moriya, Tatsumi; Tanaka, Shiro; Kawasaki, Ryo; Ohashi, Yasuo; Akanuma, Yasuo; Yamada, Nobuhiro; Sone, Hirohito; Yamashita, Hidetoshi; Katayama, Shigehiro

2013-09-01

To examine the interactive relationship between diabetic retinopathy (DR) and diabetic nephropathy (DN) in type 2 diabetic patients and to elucidate the role of DR and microalbuminuria on the onset of macroalbuminuria and renal function decline. We explored the effects of DR and microalbuminuria on the progression of DN from normoalbuminuria and low microalbuminuria (<150 mg/gCr) to macroalbuminuria or renal function decline in the Japan Diabetes Complications Study (JDCS), which is a nationwide randomized controlled study of type 2 diabetic patients focusing on lifestyle modification. Patients were divided into four groups according to presence or absence of DR and MA: normoalbuminuria without DR [NA(DR-)] (n = 773), normoalbuminuria with DR [NA(DR+)] (n = 279), microalbuminuria without DR [MA(DR-)] (n = 277), and microalbuminuria with DR [MA(DR+)] (n = 146). Basal urinary albumin-to-creatinine ratio and DR status were determined at baseline and followed for a median of 8.0 years. Annual incidence rates of macroalbuminuria were 1.6/1,000 person-years (9 incidences), 3.9/1,000 person-years (8 incidences), 18.4/1,000 person-years (34 incidences), and 22.1/1,000 person-years (22 incidences) in the four groups, respectively. Multivariate-adjusted hazard ratios of the progression to macroalbuminuria were 2.48 (95% CI 0.94-6.50; P = 0.07), 10.40 (4.91-22.03; P < 0.01), and 11.55 (5.24-25.45; P < 0.01) in NA(DR+), MA(DR-), and MA(DR+), respectively, in comparison with NA(DR-). Decline in estimated glomerular filtration rate (GFR) per year was two to three times faster in MA(DR+) (-1.92 mL/min/1.73 m(2)/year) than in the other groups. In normo- and low microalbuminuric Japanese type 2 diabetic patients, presence of microalbuminuria at baseline was associated with higher risk of macroalbuminuria in 8 years. Patients with microalbuminuria and DR showed the fastest GFR decline. Albuminuria and DR should be considered as risk factors of renal prognosis in type 2 diabetic patients. An open sharing of information will benefit both ophthalmologists and diabetologists.

Type 1 diabetes risk for HLA-DR3 haplotypes depends on genotypic context: Association of DPB1 and HLA class I loci among DR3 and DR4 matched Italian patients and controls

PubMed Central

Noble, Janelle A.; Martin, Adelle; Valdes, Ana M.; Lane, Julie A.; Galgani, Andrea; Petrone, Antonio; Lorini, Renata; Pozzilli, Paolo; Buzzetti, Raffaella; Erlich, Henry A.

2008-01-01

Patients with high-risk HLA-DR-DQ genotypes for type 1 diabetes (T1D) were compared to HLA-matched controls to evaluate T1D risk for other HLA loci, including HLA-A, -B, -Cw, and DPB1. Patients (n=133) with high-risk genotypes (DR3/DR3, DR3/DR4, DR4/DR4) were selected from the Lazio (Rome) region of Italy. Screening of more than 9000 subjects from the Lazio region and northern Italy yielded 162 controls with high- T1D-risk haplotypes. Although the overall distributions were not significantly different, allele frequency differences were discovered between the controls from Lazio and those from Northern Italy for some alleles previously shown to affect T1D risk, such as A*3002, DPB1*0301, and DPB1*0402. Therefore, Lazio patient data were compared both to the Lazio subset of controls (n=53) and to the entire group of controls for association analyses. Significant allele frequency differences between patients and DR-DQ-matched controls were found for specific alleles at all loci. Data for the DR3/DR3 subset of patients and controls showed an increase of Cw*0702 in patients. Reduced patient, compared to control, frequencies were seen for several alleles, including A*0101, B*0801, and Cw*0701, all found on the highly-conserved, extended DR3 haplotype known as 8.1 in DR3/DR3, but not DR3/DR4, subgroup. DPB1*0101, often found on 8.1 haplotypes, was also less frequent in DR3/DR3 patients than controls. Analysis of family-based data from the HBDI repository was consistent with the observed results from the Italian subjects, suggesting the presence of a T1D-protective locus at or near A*0101 and a second T1D-protective locus at or near DPB1*0101. These data suggest that T1D risk conferred by the 8.1 haplotype is genotype dependent. PMID:18486765

Combined treatment of rapamycin and dietary restriction has a larger effect on the transcriptome and metabolome of liver.

PubMed

Fok, Wilson C; Bokov, Alex; Gelfond, Jonathan; Yu, Zhen; Zhang, Yiqiang; Doderer, Mark; Chen, Yidong; Javors, Martin; Wood, William H; Zhang, Yongqing; Becker, Kevin G; Richardson, Arlan; Pérez, Viviana I

2014-04-01

Rapamycin (Rapa) and dietary restriction (DR) have consistently been shown to increase lifespan. To investigate whether Rapa and DR affect similar pathways in mice, we compared the effects of feeding mice ad libitum (AL), Rapa, DR, or a combination of Rapa and DR (Rapa + DR) on the transcriptome and metabolome of the liver. The principal component analysis shows that Rapa and DR are distinct groups. Over 2500 genes are significantly changed with either Rapa or DR when compared with mice fed AL; more than 80% are unique to DR or Rapa. A similar observation was made when genes were grouped into pathways; two-thirds of the pathways were uniquely changed by DR or Rapa. The metabolome shows an even greater difference between Rapa and DR; no metabolites in Rapa-treated mice were changed significantly from AL mice, whereas 173 metabolites were changed in the DR mice. Interestingly, the number of genes significantly changed by Rapa + DR when compared with AL is twice as large as the number of genes significantly altered by either DR or Rapa alone. In summary, the global effects of DR or Rapa on the liver are quite different and a combination of Rapa and DR results in alterations in a large number of genes and metabolites that are not significantly changed by either manipulation alone, suggesting that a combination of DR and Rapa would be more effective in extending longevity than either treatment alone. © 2013 The Authors. Aging Cell published by the Anatomical Society and John Wiley & Sons Ltd.

Epitaxial Garnet Investigation; Technical Report, Foreign Travel

DTIC Science & Technology

1988-10-25

Pure yttrium iron garnet (YIG) films are grown on GGG substrates by * liquid phase epitaxy ( LPE ) in production lots. In addition, one or two...epitaxial garnet films for Philips Dr. Krumme * Dr. Doormann 3-6-87 Thomson - CSF Research Center, Orsay, France Dr. J. P. Castera Dr. P. L. Meunier all...research physicists who grow, characterize, Dr. J. Y. Beguin or use epitaxial garnet films for Thomson CSF. Dr. J. L. Rolland Dr. P. Friez The

44 CFR 206.209 - Arbitration for Public Assistance determinations related to Hurricanes Katrina and Rita (Major...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 44 Emergency Management and Assistance 1 2012-10-01 2011-10-01 true Arbitration for Public Assistance determinations related to Hurricanes Katrina and Rita (Major disaster declarations DR-1603, DR... determinations related to Hurricanes Katrina and Rita (Major disaster declarations DR-1603, DR-1604, DR-1605, DR...

44 CFR 206.209 - Arbitration for Public Assistance determinations related to Hurricanes Katrina and Rita (Major...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 44 Emergency Management and Assistance 1 2014-10-01 2014-10-01 false Arbitration for Public Assistance determinations related to Hurricanes Katrina and Rita (Major disaster declarations DR-1603, DR... determinations related to Hurricanes Katrina and Rita (Major disaster declarations DR-1603, DR-1604, DR-1605, DR...

44 CFR 206.209 - Arbitration for Public Assistance determinations related to Hurricanes Katrina and Rita (Major...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 44 Emergency Management and Assistance 1 2013-10-01 2013-10-01 false Arbitration for Public Assistance determinations related to Hurricanes Katrina and Rita (Major disaster declarations DR-1603, DR... determinations related to Hurricanes Katrina and Rita (Major disaster declarations DR-1603, DR-1604, DR-1605, DR...

44 CFR 206.209 - Arbitration for Public Assistance determinations related to Hurricanes Katrina and Rita (Major...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 44 Emergency Management and Assistance 1 2011-10-01 2011-10-01 false Arbitration for Public Assistance determinations related to Hurricanes Katrina and Rita (Major disaster declarations DR-1603, DR... determinations related to Hurricanes Katrina and Rita (Major disaster declarations DR-1603, DR-1604, DR-1605, DR...

Remotely Piloted Aerial Systems Survivability: A Defense-in-Depth Approach

DTIC Science & Technology

2012-09-01

Robert J. Herman, Henry J. Kluepfel, Gen Richard L. Lawson, Dr. Graham K. Soper , Dr. Lowell L. Wood, Jr., Dr. Joan B. Woodard, Report of the...Kluepfel, Gen Richard L. Lawson, Dr. Graham K. Soper , Dr. Lowell L. Wood, Jr., Dr. Joan B. Woodard. Report of the Commission to Assess the Threat to

NRL Fact Book 1992-1993

DTIC Science & Technology

1993-06-01

administering contractual support for lab-wide or multiple buys of ADP systems, software, and services. Computer systems located in the Central Computing Facility...Code Dr. D.L. Bradley Vacant Mrs. N.J. Beauchamp Dr. W.A. Kuperman Dr. E.R. Franchi Dr. M.H. Orr Dr. J.A. Bucaro Mr. L.B. Palmer Dr. D.J. Ramsdale Mr

An analysis of variation in the long-range genomic organization of the human major histocompatibility complex class II region by pulsed-field gel electrophoresis.

PubMed

Dunham, I; Sargent, C A; Dawkins, R L; Campbell, R D

1989-11-01

The class II region of the human major histocompatibility complex in seven common HLA haplotypes has been analyzed using pulsed-field gel electrophoresis, restriction enzymes that cut genomic DNA infrequently, and Southern blotting. This analysis has revealed that there are differences in the amount of DNA present in the DQ and DR subregions dependent on the haplotype. The class II region of the DR3 haplotype spans approximately 750 kb and has the same amount of DNA as the class II region of the DR5 and DR6 haplotypes. However, the DR2 haplotype has approximately 30 kb more DNA within the DR subregion. The DR4 haplotype has an additional approximately 110 kb of DNA within the DQ or DR subregions compared to the DR3, DR5, and DR6 haplotypes. These haplotype-specific differences could have some bearing both on the analysis of disease susceptibility and on the ability of chromosomes possessing different HLA haplotypes to recombine within the DQ/DR subregions.

a Passage to the Universe

NASA Astrophysics Data System (ADS)

1995-11-01

Exciting Week Ahead for Winners of Unique Astronomy Contest Following the very successful events of 1993 and 1994 [1], ESO again opens its doors for an `educational adventure' next week. It takes place within the framework of the `Third European Week for Scientific and Technological Culture', initiated and supported by the European Commission. On Tuesday, November 14, 1995, about forty 16-18 year old students and their teachers will converge towards Munich from all corners of Europe. They are the happy winners of a Europe-wide astronomy contest (`Europe Towards the Stars') that took place during the summer and early autumn. Their prize is a free, week-long stay at the Headquarters of the European Southern Observatory. During this time they will work with professional astronomers and get a hands-on experience within modern astronomy and astrophysics at one of the world's foremost international centres. In particular, the participants will be exposed to the scientific method by carrying through a research programme of their own, all the way from conception to interpretation of the data. The culmination of the stay will be the opportunity to perform remote observations via a satellite link with two major telescopes at the ESO La Silla observatory in Chile, including the very advanced 3.5-metre New Technology Telescope (NTT). The European Contest This year's EU/ESO programme was devised as a contest between joint teams of secondary school students and their teachers. The teams had to choose between four different subjects requiring either practical or theoretical work, and all with strong scientific and technological components. One subject was to devise an observational programme with an existing telescope and instrument and to discuss the resulting data in order to arrive at a scientific conclusion. This was the preferred subject by many teams. For instance, the winning German team observed the moons of Jupiter and the Danish team studied a star cluster in order to derive its age and other characteristics. The second subject, to build and test an astronomical instrument, posed a welcome challenge to teams with a particular interest in technology. Some of the instruments were quite advanced; in France, for instance, the winning team built a working solar radio interferometer. In the same direction, but with a more theoretical touch, some teams chose the third subject, to design on paper an instrument for a future space mission to the outer Solar System for the exploration of Pluto and the newly discovered Transneptunian Objects. The last subject, which secured the first prize for the Dutch winning team, concerned the study of a hypothetical, stable planetary system around another star, its properties and the technical requirements for observing this system from the Earth. With the recent discovery of a planet around the nearby star 51 Pegasi, this theme has unexpectedly gained added relevance. During the past few weeks, the work by the teams was evaluated by specially established, national juries, consisting of scientists, educators and ministerial representatives (addresses below). The establishment of the European Association for Astronomy Education (EAAE) last year contributed to the Europe-wide interest in these matters and many EAAE members have been involved in the present contest, as participants or in its organisation. The national winners have now been selected; their names are listed below. In most countries, the award ceremonies have already taken place. Media Coverage The main event, i.e. the stay of the winning teams at the ESO Headquarters in Garching (Germany) from November 14 - 20, 1995, will be covered by the various media in the appropriate ways. More information, including a detailed programme of the many (day and night) activities during this event, may be obtained at request from the ESO Education and Public Relations Department at the Headquarters. In this connection, ESO is also pleased to invite the media to a concluding Press Conference , during which the outcome of this unique event will be summarized by the participants and the organisers: Monday, November 20, 1995, 15:30 pm, at the ESO Headquarters, Karl-Schwarzschild-Strasse 2, D-85748 Garching, Germany List of National First-Prize Winners Belgium: Mr. Freddy Allemeersch (Teacher), Mr. Pieter De Ceuninck, Mr. Jeroen Staelens (Onze-Lieve-Vrouwecollege, Brugge) Denmark: Mr. Joern C. Olsen, Mr. Henrik Struckmann, Mr. Uffe A. Hansen, Mr. Mogens Winther (Teacher) (Soenderborg Amtsgymnasium) Finland: Mr. Reima Eresmaa, Ms. Laura Elina Nykyri, Ms. Reetamaija Janhonen (Cygnaeues-Lukeo, Jyvaeskylae and Jyvaeskylaen Lyseon Lukeo) France: Mr. Rene Cavaroz (Teacher), Mr. Vincent Hardy, Mr. Antoine Lesuffleur (Lycee Chartier, Bayeux) Germany: Ms. Dorothee Barth, Mr. Walter Czech (Teacher), Mr. Uwe Kranz, Ms. Karin Wieland (Immanuel-Kant-Gymnasium, Leinfelden-Echterdingen, Baden-Wuerttemberg) Greece: Ms. Agni Ioannidi, Ms. Elena Katifori, Mr. Vassilis Samiotis, Mr. Vassillos Tzotzes (Teacher) (Second Varvakelo Experimental Lyceum, Athens) Ireland: Mr. Declan Maccuarta (Teacher), Mr. Colm Mcloughlin (St. Peter's College, Wexford, Co. Wexford) Italy: Mr. Pasquale Ciarletta, Ms. Francesca D'elia, Ms. Ada Fortugna (Teacher), Mr. Alfredo Pudano (Liceo Scientifico `Leonardo da Vinci', Reggio Calabria) The Netherlands: Mr. Alex De Beer, Mr. Klaas Huijbregts, Mr. Ruud Nellen (Norbertuscollege, Rosendaal) Spain: Mr. Aritz Atela Aio, Mr. Julen Sarasola Manich (Teacher), Mr. Jon Huertas Rodriquez (Txorierri Batxilergoko Institua, Derio Bizkaia) Sweden: Mr. Rahman Amanullah, Mr. Kjell L. Bonander (Teacher), Mr. Tomas Oppelstrup, Ms. Christin Wiedemann (Saltsjoebadens Samskola, Saltsjoebaden) United Kingdom: Mr. Michael Ching, Dr. Richard Field (Teacher) (Oundle School, Peterborough) National Committees Further information about the national contests may be obtained from the National Committees: Belgium: Dr. C. Sterken, Vrije Universiteit Brussel, Campus Ofenplein, Pleinlaan 2, B-1050 Brussels, Tel. 0032-2-6293469, Fax 0032-9-3623976, E-mail csterken@is1.vub.ac.be Denmark: Mr. B. F. Joergensen, Tycho Brahe Planetariet, Gl. Kongevej 10, DK-1610 Copenhagen V, Tel. 0045-33-144888, Fax 0045-33-142888, E-mail tycho@inet.uni-c.dk Finland: Mr. M. Hotakainen, Taehtitieteellinen Yhdistys Ursa, Laivanvarustajankatu 9C 54, FIN-00140 Helsinki, Tel. 00358-0-174048, Fax 00358-0-657728 France: Mr. B. Pellequer, Geospace d'Aniane, Boite Postale 22, F-34150 Aniane, Tel. 0033-6-7034949, Fax 0033-6-7752864 Germany: Dr. K.-H. Lotze, Friedrich-Schiller-Universitaet, Max-Wien-Platz 1, D-07743 Jena, Germany, Tel. +49-3641-635904/636654, Fax +49-3641-636728 Greece: Dr. D. Simopoulos, Eugenides Foundation, Astronomy Department, 387 Sygrou Avenue, Palaio Faliro, GR-175 64 Athens, Tel. 0030-1-941-1181, Fax 0030-1-941-7372 Ireland: Dr. I. Elliot, Dunsink Observatory (Dublin Institute for Advanced Studies), Castleknock, Dublin 15, Tel. 00353-1- 838-7911/7959, Fax 00353-1-8387090, E-mail ie@dunsink.dias.ie Italy: Dr. B. Monsignori Fossi, Osservatorio Astrofisico di Arcetri, Largo Enrico Fermi 5, I-50125 Florence, Tel. 0039-55-2752246, Fax 0039-55-220039, E-mail bmonsignori@arcetri.astro.it The Netherlands: Dr. M. Drummen, Stichting `De Koepel', Zonnenburg 2, NL-3512 NL Utrecht, Tel. 0031-30-311360, Fax 0031-30-342852, E-mail dekoepel@knoware.nl Spain: Dr. A. Sanchez/Dr. T. Fernandez, Planetario de Madrid, Parque Tierno Galvan, E-28045 Madrid, Tel. 0034-1-4673578, Fax 0034-1-4681154, E-mail tfc@vilspa.esa.es Sweden: Dr. K. Loden, Stockholms Observatorium, S-133 36 Saltsjoebaden, Tel. 0046-8-164454, Fax 0046-8-7174719, E-mail lodenk@astro.su.se United Kingdom: Dr. A. M. Cohen, c/o The Association for Astronomy Education, 9 Hurst Lane, Bollington, Macclesfield, Cheshire SK10 5LN, England Notes: [1] See ESO Press Releases 08/93 of 5 November 1993 and 17/94

Characterization of the Interactions between Calmodulin and Death Receptor 5 in Triple-negative and Estrogen Receptor-positive Breast Cancer Cells

PubMed Central

Fancy, Romone M.; Wang, Lingyun; Zeng, Qinghua; Wang, Hong; Zhou, Tong; Buchsbaum, Donald J.; Song, Yuhua

2016-01-01

Activation of death receptor-5 (DR5) leads to the formation of death inducing signaling complex (DISC) for apoptotic signaling. Targeting DR5 to induce breast cancer apoptosis is a promising strategy to circumvent drug resistance and present a target for breast cancer treatment. Calmodulin (CaM) has been shown to regulate DR5-mediated apoptotic signaling, however, its mechanism remains unknown. In this study, we characterized CaM and DR5 interactions in breast cancer cells with integrated experimental and computational approaches. Results show that CaM directly binds to DR5 in a calcium dependent manner in breast cancer cells. The direct interaction of CaM with DR5 is localized at DR5 death domain. We have predicted and verified the CaM-binding site in DR5 being 354WEPLMRKLGL363 that is located at the α2 helix and the loop between α2 helix and α3 helix of DR5 DD. The residues of Trp-354, Arg-359, Glu-355, Leu-363, and Glu-367 in DR5 death domain that are important for DR5 recruitment of FADD and caspase-8 for DISC formation to signal apoptosis also play an important role for CaM-DR5 binding. The changed electrostatic potential distribution in the CaM-binding site in DR5 DD by the point mutations of W354A, E355K, R359A, L363N, or E367K in DR5 DD could directly contribute to the experimentally observed decreased CaM-DR5 binding by the point mutations of the key residues in DR5 DD. Results from this study provide a key step for the further investigation of the role of CaM-DR5 binding in DR5-mediated DISC formation for apoptosis in breast cancer cells. PMID:27129269

HLA DR phenotypic frequencies and genetic risk of Type 1 diabetes in west region of Algeria, Tlemcen

PubMed Central

Aribi, Mourad; Moulessehoul, Soraya; Benabadji, Ahmed-Bakir; Kendoucitani, Mohammed

2004-01-01

Background The main genomic region controlling the predisposition to type 1 diabetes is the Human Leukocyte Antigens (HLA) class II of the major histocompatibility complex. Association with different HLA types depends also on the studied populations. In our investigation, we tried to measure the phenotypic HLA class II association frequencies of DR3 and/or DR4 antigens, using a serologic method called microlymphocytotoxicity analysis, in diabetic and nondiabetic (ND) subjects originating from the west-Algerian region of Tlemcen. The aim of the present study was to determine which HLA DR antigens represent a high susceptibility to develop the disease in this area. Using a case-control retrospective study design, we randomly recruited ninety-one related subjects, 39 type 1 diabetics and 52 ND as controls, at the Internal Medicine Board of Medical Centre University of Tlemcen. Results DR3 antigen frequencies were comparable between the type 1 diabetics and the ND subjects and showed no association with the disease (p = 1.000, OR = 0.95), whereas DR4 and DR3DR4 antigens were associated with susceptibility to develop type 1 diabetes (DR4; OR = 2.10, DR3DR4; OR = 1.30). Also, no incidence for DR3 (p = 0.2646) or DR3DR4 (p = 0.0699) antigen frequencies was related to the sex ratio. However, significant differences in HLA DR4 frequencies between type 1 diabetics and ND were found to be related to sex (p = 0.0085). Conclusion Taken together, our investigation showed that the strongest association with type 1 diabetes was noticed in the presence of HLA DR4 antigens followed by DR3DR4 antigens. This study highlighted a characteristic of Tlemcen population; a history of consanguineous marriages. Association studies between the disease and genetic polymorphisms should be undertaken in a population where consanguinity is more limited to reduce confounding in result interpretations. PMID:15331022

Hydrographic Data from the Pilot Study of the Coastal Transition Zone (CTZ) Program, 17-26 March 1987

DTIC Science & Technology

1989-01-30

C- o C! -0 0 0 -4i 104 Wz 0 4 P, N. *40 #A -*0 9*4 14 -*40s on f I046.. I 4n in f" *l eq r,4 "I CA 0~ 0 ~ 4 i 0 ~1 0 00 Va 4 n !=4 O .." VV " Ka ...97331 Dr. Robert L. Smith 1 Dr. Adriana Huyer I Dr. P. Michael Kosro 1 Dr. Mark R. Abbott I Dr. John S. Allen 1 Dr. Tim Cowles 1 Dr. David Kadco i Dr. Ted

Feature Extraction and Classification of Magnetic and EMI Data, San Luis Obispo, CA

DTIC Science & Technology

2010-07-01

Stephen Billings Dr. Len Pasion Dr. Nicolas Lhomme Kevin Kingdon Jon Jacobson Sky Research, Inc. Dr. Douglas Oldenburg Dr. Lin Ping Song...Discrimination Strategies for Application to Live Sites W912HQ-05-C-0018 ESTCP 0504Dr. Stephen Billings, Dr. Len Pasion , Dr. Nicolas Lhomme, Kevin...e.g. Hart et al., 2001; Collins et al., 2001; Pasion & Oldenburg, 2001; Zhang et al., 2003a, 2003b; Billings, 2004). The most promising discrimination

Critical elements on fitting the Bayesian multivariate Poisson Lognormal model

NASA Astrophysics Data System (ADS)

Zamzuri, Zamira Hasanah binti

2015-10-01

Motivated by a problem on fitting multivariate models to traffic accident data, a detailed discussion of the Multivariate Poisson Lognormal (MPL) model is presented. This paper reveals three critical elements on fitting the MPL model: the setting of initial estimates, hyperparameters and tuning parameters. These issues have not been highlighted in the literature. Based on simulation studies conducted, we have shown that to use the Univariate Poisson Model (UPM) estimates as starting values, at least 20,000 iterations are needed to obtain reliable final estimates. We also illustrated the sensitivity of the specific hyperparameter, which if it is not given extra attention, may affect the final estimates. The last issue is regarding the tuning parameters where they depend on the acceptance rate. Finally, a heuristic algorithm to fit the MPL model is presented. This acts as a guide to ensure that the model works satisfactorily given any data set.

A new response matrix for a 6LiI scintillator BSS system

NASA Astrophysics Data System (ADS)

Lacerda, M. A. S.; Méndez-Villafañe, R.; Lorente, A.; Ibañez, S.; Gallego, E.; Vega-Carrillo, H. R.

2017-10-01

A new response matrix was calculated for a Bonner Sphere Spectrometer (BSS) with a 6 LiI(Eu) scintillator, using the Monte Carlo N-Particle radiation transport code MCNPX. Responses were calculated for 6 spheres and the bare detector, for energies varying from 1.059E(-9) MeV to 105.9 MeV, with 20 equal-log(E)-width bins per energy decade, totalizing 221 energy groups. A comparison was done among the responses obtained in this work and other published elsewhere, for the same detector model. The calculated response functions were inserted in the response input file of the MAXED code and used to unfold the total and direct neutron spectra generated by the 241Am-Be source of the Universidad Politécnica de Madrid (UPM). These spectra were compared with those obtained using the same unfolding code with the Mares and Schraube matrix response.

Molecular identification of Aspergillus and Eurotium species isolated from rice and their toxin-producing ability.

PubMed

Yazdani, D; Zainal Abidin, M A; Tan, Y H; Kamaruzaman, S

2011-01-01

Thirty milled rice samples were collected from retailers in 4 provinces of Malaysia. These samples were evaluated for Aspergillus spp. infection by direct plating on malt extract salt agar (MESA). All Aspergillus holomorphs were isolated and identified using nucleotide sequences of ITS 1 and ITS 2 of rDNA. Five anamorphs (Aspergillus flavus, A. oryzae, A. tamarii, A. fumigatus and A. niger) and 5 teleomorphs (Eurotium rubrum, E. amstelodami, E. chevalieri, E. cristatum and E. tonophilum) were identified. The PCR-sequencing based technique for sequences of ITS 1 and ITS 2 is a fast technique for identification of Aspergillus and Eurotium species, although it doesn't work flawlessly for differentiation of Eurotium species. All Aspergillus and Eurotium isolates were screened for their ability to produce aflatoxin and ochratoxin A (OTA) by HPLC and TLC techniques. Only A. flavus isolate UPM 89 was able to produce aflatoxins B1 and B2.

[Analysis of HLA haplotype frequency and linkage disequilibrium in patients with acute lymphoblastic leukemia from Northern Chinese Han].

PubMed

Gao, Su-qing; Cheng, Liang-hong; Lu, Liang; Jing, Shi-zheng; Cheng, Xi; Zhang, Yin-ze; Zou, Hong-yan; Deng, Zhi-hui

2009-02-01

To analyze the difference between the frequencies of HLA-A-B, B-DRB1 and A-B-DRB1 haplotype, as well as their linkage disequilibrium pattern in patients with acute lymphoblastic leukemia(ALL) and healthy controls from Northern Chinese Han. The frequencies of HLA-A-B, B-DRB1, A-B-DR haplotypes and linkage disequilibrium were estimated by Expectation Maximization method based on the genotypes of 643 patients with ALL and 2 0359 unrelated healthy donors, and the statistical significance between the two groups were estimated by chi-square test. Linkage disequilibrium was analyzed with population genetic methods. The most common HLA-A-B, B-DRB1, and A-B-DR haplotypes were A30-B13, A2-B46, A33-B58, B13-DR7, B46-DR9, B52-DR15, B58-DR17, A30-B13-DR7, A33-B58-DR17 and A1-B37-DR10 in both groups. The frequencies of A30-B13, A2-B46, A33-B44, B13-DR7, A30-B13-DR7 and A2-B46-DR9 haplotypes and linkage disequilibrium value were significantly decreased (P<0.05) in the patient group than that in the control group. On the other hand, the frequencies of A2-B52, A31-B61, A24- B8, B60-DR9, B27-DR4, B52-DR14, B44-DR17, B27-DR12 and A11-B27-DR12 haplotypes and linkage disequilibrium value were significantly increased (P<0.05) in the patient group than that in the control group. There are some common and positive linkage disequilibrium haplotypes in both the ALL patients and the healthy donors in Northern Chinese Han. Interestingly, some haplotypes and their linkage disequilibrium patterns had significantly different distributions between the two groups. The study provided basic data for the relationship of ALL and HLA haplotype and for finding the HLA-A, B, DR matching donors.

Mutual Regulation of NOD2 and RIG-I in Zebrafish Provides Insights into the Coordination between Innate Antibacterial and Antiviral Signaling Pathways.

PubMed

Nie, Li; Xu, Xiao-Xiao; Xiang, Li-Xin; Shao, Jian-Zhong; Chen, Jiong

2017-05-27

Nucleotide-binding oligomerization domain-containing protein 2 (NOD2) and retinoic acid-inducible gene I (RIG-I) are two important cytosolic pattern recognition receptors (PRRs) in the recognition of pathogen-associated molecular patterns (PAMPs), initiating innate antibacterial and antiviral signaling pathways. However, the relationship between these PRRs, especially in teleost fish models, is rarely reported. In this article, we describe the mutual regulation of zebrafish NOD2 ( Dr NOD2) and RIG-I ( Dr RIG-I) in innate immune responses. Luciferase assays were conducted to determine the activation of NF-κB and interferon signaling. Morpholino-mediated knockdown and mRNA-mediated rescue were performed to further confirm the regulatory roles between Dr NOD2 and Dr RIG-I. Results showed that Dr NOD2 and Dr RIG-I shared conserved structural hallmarks with their mammalian counterparts, and activated Dr RIG-I signaling can induce Dr NOD2 production. Surprisingly, Dr NOD2-initiated signaling can also induce Dr RIG-I expression, indicating that a mutual regulatory mechanism may exist between them. Studies conducted using HEK293T cells and zebrafish embryos showed that Dr RIG-I could negatively regulate Dr NOD2-activated NF-κB signaling, and Dr NOD2 could inhibit Dr RIG-I-induced IFN signaling. Moreover, knocking down Dr RIG-I expression by morpholino could enhance Dr NOD2-initiated NF-κB activation, and vice versa, which could be rescued by their corresponding mRNAs. Results revealed a mutual feedback regulatory mechanism underlying NOD2 and RIG-I signaling pathways in teleosts. This mechanism reflects the coordination between cytosolic antibacterial and antiviral PRRs in the complex network of innate immunity.

Dual Agonist Surrobody Simultaneously Activates Death Receptors DR4 and DR5 to Induce Cancer Cell Death.

PubMed

Milutinovic, Snezana; Kashyap, Arun K; Yanagi, Teruki; Wimer, Carina; Zhou, Sihong; O'Neil, Ryann; Kurtzman, Aaron L; Faynboym, Alexsandr; Xu, Li; Hannum, Charles H; Diaz, Paul W; Matsuzawa, Shu-ichi; Horowitz, Michael; Horowitz, Lawrence; Bhatt, Ramesh R; Reed, John C

2016-01-01

Death receptors of the TNF family are found on the surface of most cancer cells and their activation typically kills cancer cells through the stimulation of the extrinsic apoptotic pathway. The endogenous ligand for death receptors 4 and 5 (DR4 and DR5) is TNF-related apoptosis-inducing ligand, TRAIL (Apo2L). As most untransformed cells are not susceptible to TRAIL-induced apoptosis, death receptor activators have emerged as promising cancer therapeutic agents. One strategy to stimulate death receptors in cancer patients is to use soluble human recombinant TRAIL protein, but this agent has limitations of a short half-life and decoy receptor sequestration. Another strategy that attempted to evade decoy receptor sequestration and to provide improved pharmacokinetic properties was to generate DR4 or DR5 agonist antibodies. The resulting monoclonal agonist antibodies overcame the limitations of short half-life and avoided decoy receptor sequestration, but are limited by activating only one of the two death receptors. Here, we describe a DR4 and DR5 dual agonist produced using Surrobody technology that activates both DR4 and DR5 to induce apoptotic death of cancer cells in vitro and in vivo and also avoids decoy receptor sequestration. This fully human anti-DR4/DR5 Surrobody displays superior potency to DR4- and DR5-specific antibodies, even when combined with TRAIL-sensitizing proapoptotic agents. Moreover, cancer cells were less likely to acquire resistance to Surrobody than either anti-DR4 or anti-DR5 monospecific antibodies. Taken together, Surrobody shows promising preclinical proapoptotic activity against cancer cells, meriting further exploration of its potential as a novel cancer therapeutic agent. ©2015 American Association for Cancer Research.

Dual agonist Surrobody™ simultaneously activates death receptors DR4 and DR5 to induce cancer cell death

PubMed Central

Milutinovic, Snezana; Kashyap, Arun K.; Yanagi, Teruki; Wimer, Carina; Zhou, Sihong; O' Neil, Ryann; Kurtzman, Aaron L.; Faynboym, Alexsandr; Xu, Li; Hannum, Charles H.; Diaz, Paul W.; Matsuzawa, Shu-ichi; Horowitz, Michael; Horowitz, Lawrence; Bhatt, Ramesh R.; Reed, John C.

2015-01-01

Death receptors of the Tumor Necrosis Factor (TNF) family are found on surface of most cancer cells and their activation typically kills cancer cells through the stimulation of the extrinsic apoptotic pathway. The endogenous ligand for death receptors-4 and -5 (DR4 and DR5) is Tumor Necrosis Factor-Related Apoptosis-Inducing Ligand, TRAIL (Apo2L). Since most untransformed cells are not susceptible to TRAIL-induced apoptosis, death receptor activators have emerged as promising cancer therapeutic agents. One strategy to stimulate death receptors in cancer patients is to use soluble human recombinant TRAIL protein, but this agent has limitations of a short half-life and decoy receptor sequestration. Another strategy that attempted to evade decoy receptor sequestration and to provide improved pharmacokinetic properties was to generate DR4 or DR5 agonist antibodies. The resulting monoclonal agonist antibodies overcame the limitations of short half-life and avoided decoy receptor sequestration, but are limited by activating only one of the two death receptors. Here, we describe a DR4 and DR5 dual agonist produced using Surrobody™ technology that activates both DR4 and DR5 to induce apoptotic death of cancer cells in vitro and in vivo and also avoids decoy receptor sequestration. This fully human anti-DR4/DR5 Surrobody displays superior potency to DR4- and DR5-specific antibodies, even when combined with TRAIL-sensitizing pro-apoptotic agents. Moreover, cancer cells were less likely to acquire resistance to Surrobody than either anti-DR4 or anti-DR5 mono-specific antibodies. Taken together, Surrobody shows promising preclinical pro-apoptotic activity against cancer cells, meriting further exploration of its potential as a novel cancer therapeutic agent. PMID:26516157

Effectiveness of Diffusion Barrier Coatings for Mo-Re Embedded in C/SiC and C/C

NASA Technical Reports Server (NTRS)

Glass, David E.; Shenoy, Ravi N.; Wang, Zeng-Mei; Halbig, Michael C.

2001-01-01

Advanced high-temperature cooling applications may often require the elevated-temperature capability of carbon/silicon carbide or carbon/carbon composites in combination with the hermetic capability of metallic tubes. In this paper, the effects of C/SiC and C/C on tubes fabricated from several different refractory metals were evaluated. Though Mo, Nb, and Re were evaluated in the present study, the primary effort was directed toward two alloys of Mo-Re, namely, arc cast Mo-41Re and powder metallurgy Mo-47.5Re. Samples of these refractory metals were subjected to either the PyC/SiC deposition or embedding in C/C. MoSi2(Ge), R512E, and TiB2 coatings were included on several of the samples as potential diffusion barriers. The effects of the processing and thermal exposure on the samples were evaluated by conducting burst tests, microhardness surveys, and scanning electron microscopic examination (using either secondary electron or back scattered electron imaging and energy dispersive spectroscopy). The results showed that a layer of brittle Mo-carbide formed on the substrates of both the uncoated Mo-41Re and the uncoated Mo-47.5Re, subsequent to the C/C or the PyC/SiC processing. Both the R512E and the MoSi2(Ge) coatings were effective in preventing not only the diffusion of C into the Mo-Re substrate, but also the formation of the Mo-carbides. However, none of the coatings were effective at preventing both C and Si diffusion without some degradation of the substrate.

Athena Community Office

NASA Astrophysics Data System (ADS)

Martínez-Núnez, S.; Barcons, X.; Barret, D.; Bozzo, E.; Carrera, F. J.; Ceballos, M. T.; Gómez, S.; Monterde, M. P.; Rau, A.

2017-03-01

The Athena Community Office (ACO) has been established by ESA's Athena Science Study Team (ASST) in order to obtain support in performing its tasks assigned by ESA, and most specially in the ASST role as "focal point for the interests of the broad scientific community". The ACO is led by the Instituto de Física de Cantabria (CSIC-UC), and its activities are funded by CSIC and UC. Further ACO contributors are the University of Geneva, MPE and IRAP. In this poster, we present ACO to the Spanish Astronomical Community, informing about its main responsibilities, which are: assist the ASST in organising and collecting support from the Athena Working Groups and Topical Panels; organise and maintain the documentation generated by the Athena Working Groups and Topical Panels; manage the Working Group and Topical Panel membership lists; assist the ASST in promoting Athena science capabilities in the research world, through conferences and workshops; keep a record of all papers and presentations related to Athena; support the production of ASST documents; produce and distribute regularly an Athena Newsletter, informing the community about all mission and science developments; create and maintain the Athena Community web portal; maintain an active communication activity; promote, organise and support Athena science-related public outreach, in coordination with ESA and other agencies involved when appropriate; and, design, produce materials and provide pointers to available materials produced by other parties. In summary, ACO is meant to become a focal point to facilitate the scientific exchange between the Athena activities and the scientific community at large, and to disseminate the Athena science objectives to the general public.

Keeping the Edge. Air Force Materiel Command Cold War Context (1945-1991). Volume 1: Command Lineage Scientific Achievement and Major Tenant Missions

DTIC Science & Technology

2003-08-01

Gerhard Braun, Dr. Rudolf Edse, Dr. Wolfgang Noeggerath, Hans Rister, and Dr. Theodor Zobel. (Dr. von Braun and the four other rocket specialists...Heinrich Albers, Herman Bottenhorn, Gerhard Krause , Dr. Ernst Kugel, and Hermann Nehlsen to Loewy Hydropress, Inc., in New York, while Dr. Claus...March 1948, Air Materiel Command maintained the Watson- and Cambridge-assigned German scientists at status quo, but added Dr. Wolfgang Pfister the next

Chesapeake Bay Study. Supplement A. Problem Identification. Supplement B. Public Involvement. Supplement C. The Chesapeake Bay Hydraulic Model.

DTIC Science & Technology

1984-09-01

1968-71 Dr. Francis S. L. Williamson, 1971-75 Dr. J. Kevin Sullivan, 1975-83 Dr. David L. Correll, 1983-84 B-I...BASIC RESEARCH (cont’d) SMITHSONIAN INSTITUTION Dr. I. Eugene Wallen, 1968-71 Dr. Francis S. L. Williamson, 1971-75 Dr. 3. Kevin Sullivan, 1975-83 Dr...MSX merical fishino and recrea- by increased distributions of waer sources fromsaltitru- the B E P predicted oysters tion industries and for the

Novel Devices for Plasmonic and Nanophotonic Networks: Exploiting X-ray Wavelengths at Optical Frequencies

DTIC Science & Technology

2012-09-01

Harry A. Atwater(P.I.), Axel Scherer (co-PI), Oskar J . Painter (co-PI), Kerry J . Vahala 5d. PROJECT NUMBER Eli Yablonovitch (co-PI), Xiang Zhang (co...Faculty: Dr. Harry A. Atwater, Dr. Axel Scherer, Dr. Oskar J . Painter, Dr. Kerry J . Vahala, Dr. Federico Capasso, Dr. Eli Yablonovitch, Dr. Xiang...Raman microlasers on a silicon chip fabricated by the sol-gel process" L. Yang, T. Carmon, B. Min, S. M. Spillane, and K. J . Vahala, 091114, Applied

Direct and indirect costs among employees with diabetic retinopathy in the United States.

PubMed

Lee, Lauren J; Yu, Andrew P; Cahill, Kevin E; Oglesby, Alan K; Tang, Jackson; Qiu, Ying; Birnbaum, Howard G

2008-05-01

To examine, from the employer perspective, the direct (healthcare) and indirect (workloss) costs of employees with diabetic retinopathy (DR) compared to control non-DR employees with diabetes, and within DR subgroups. Compared annual costs using claims data from 17 large companies (1999-2004). 'DR employees' (n = 2098) had >or= 1 DR (International Classification of Disease, 9th Revision [ICD-9]) diagnosis; DR subgroups included employees with diabetic macular edema (DME), proliferative DR (PDR), and employees receiving photocoagulation or vitrectomy procedures. Descriptive and multivariate tests were performed. DR employee annual direct costs were $18,218 (indirect = $3548) compared to $11,898 (indirect = $2374) for controls (Delta = $2032 (adjusted); p < 0.0001). Costs differences were larger across DR employee subgroups: DME/non-DME ($28,606/$16,363); PDR/non-PDR ($30,135/$13,445; p < 0.0001); DR with/without photocoagulation ($34,539/$16,041; p < 0.0001); and DR with/without vitrectomy ($63,933/$17,239; p < 0.0001). This study examined the incremental costs of treating DR employees, which may be higher than the incremental costs of DR itself. Some measures of diabetes severity (e.g., duration of diabetes) were not available in the claims data, and were therefore not included in the multivariate models. The cost of photocoagulation and vitrectomy procedures pertain to individuals who underwent these procedures, and not the cost of the procedures themselves. DR employees had significantly higher costs than controls, and larger differences existed within DR subgroups. Indirect costs accounted for about 20% of total cost.

Structural and functional characterization of two unusual endonuclease III enzymes from Deinococcus radiodurans.

PubMed

Sarre, Aili; Ökvist, Mats; Klar, Tobias; Hall, David R; Smalås, Arne O; McSweeney, Sean; Timmins, Joanna; Moe, Elin

2015-08-01

While most bacteria possess a single gene encoding the bifunctional DNA glycosylase Endonuclease III (EndoIII) in their genomes, Deinococcus radiodurans possesses three: DR2438 (DrEndoIII1), DR0289 (DrEndoIII2) and DR0982 (DrEndoIII3). Here we have determined the crystal structures of DrEndoIII1 and an N-terminally truncated form of DrEndoIII3 (DrEndoIII3Δ76). We have also generated a homology model of DrEndoIII2 and measured activity of the three enzymes. All three structures consist of two all α-helical domains, one of which exhibits a [4Fe-4S] cluster and the other a HhH-motif, separated by a DNA binding cleft, similar to previously determined structures of endonuclease III from Escherichia coli and Geobacillus stearothermophilus. However, both DrEndoIII1 and DrEndoIII3 possess an extended HhH motif with extra helical features and an altered electrostatic surface potential. In addition, the DNA binding cleft of DrEndoIII3 seems to be less accessible for DNA interactions, while in DrEndoIII1 it seems to be more open. Analysis of the enzyme activities shows that DrEndoIII2 is most similar to the previously studied enzymes, while DrEndoIII1 seems to be more distant with a weaker activity towards substrate DNA containing either thymine glycol or an abasic site. DrEndoIII3 is the most distantly related enzyme and displays no detectable activity towards these substrates even though the suggested catalytic residues are conserved. Based on a comparative structural analysis, we suggest that the altered surface potential, shape of the substrate-binding pockets and specific amino acid substitutions close to the active site and in the DNA interacting loops may underlie the unexpected differences in activity. Copyright © 2015 Elsevier Inc. All rights reserved.

An HPLC method associated with a thermodynamic analysis to compare the binding of TRAIL and its nanovectorized form to death receptors DR4 and DR5 and their relationship to cytotoxicity.

PubMed

Guillaume, Yves Claude; Lethier, Lydie; André, Claire

2016-11-15

TRAIL is a member of the TNF family of cytokines which induces apoptosis of cancer cells via its binding to its cognate receptors, DR5 a high affinity site and DR4 a site of low affinity. Our working group has recently demonstrated that nanovectorization of TRAIL with single wall carbon nanotubes (abbreviated NPT) enhanced TRAIL affinity to the high affinity site DR5 and increased pro apoptotic potential in different human tumor cell lines. In this paper, the DR4 low affinity site was immobilized on a chromatographic support and the effect of temperature on a wide temperature range 1°C-50°C was studied to calculate the thermodynamic parameters of the binding of TRAIL and NPT to DR4 and DR5 receptors. For the first time the heat capacity changes for the different binding processes were determined. At a physiological pH (7.4) the heat capacity changes for the binding of NPT to DR4 and DR5 were respectively equal to -0.91kJ/molK and -0.28kJ/molK and those obtained for the binding of TRAIL to DR4 and DR5 were respectively equal to -1.54kJ/molK and -1.05kJ/molK. By the use of differential scanning calorimetry (DSC), a phase transition (∼12°C for DR5, ∼4°C for DR4) between a disordered (low temperature) and an ordered (high temperature) solid like state visualized in the receptor structure confirmed the temperature dependence of binding affinity enthalpy ΔH for soluble TRAIL and its nanovectorized form to its cognate receptors. In the low temperature domain, the positive ΔH values contribute non-favourably to the free energy of binding, TRAIL and NPT described similar affinities for DR4 and DR5. For the high temperature domain, negative ΔH values indicated that van der Waals interactions and hydrogen bonding are engaged favourably at the ligand - receptor interface. Above 30°C, their rank-ordered affinities were thus strongly different in the sequence: TRAIL DR4

Pilot Testing of Commercial Refrigeration-Based Demand Response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hirsch, Adam; Clark, Jordan; Deru, Michael

Supermarkets potentially offer a substantial demand response (DR) resource because of their high energy intensity and use patterns. This report describes a pilot project conducted to better estimate supermarket DR potential. Previous work has analyzed supermarket DR using heating, ventilating, and air conditioning (HVAC), lighting, and anti-condensate heaters. This project was concerned with evaluating DR using the refrigeration system and quantifying the DR potential inherent in supermarket refrigeration systems. Ancillary aims of the project were to identify practical barriers to the implementation of DR programs in supermarkets and to determine which high-level control strategies were most appropriate for achieving certainmore » DR objectives. The scope of this project does not include detailed control strategy development for DR or development of a strategy for regional implementation of DR in supermarkets.« less

Proliferation, Potential TMD Roles, Demarcation and ABM Treaty Compatibility.

DTIC Science & Technology

1994-09-01

Dr. Sergei Blagovolin Dr. Stephen Cambone Amb. Sidney Graybeal Dr. Patricia McFate Dr. Alexander Savelyev Mr. Willis Stanley Ms. Linda Vlahos...control, missile defense, and other international security issues. He served as the director of this study. Dr. Alexander Savelyev is Vice President of...Interview with Dr. Sergei Blagovolin and Alexander Savelyev , July 15,1994, 69. Interview with Amb. Kathleen Bailey, former Assistant Director of

A Methodology for the Determination of Contract Manpower Equivalents for the United States Air Force

DTIC Science & Technology

1975-05-28

ACKNOWLEDGMENTS The author would like to thank his committee members. Dr. Cooper Redwine, Dr. Jsck Byrd, and Dr. Arup Mallik ior their guidance and...Career Field upon completion of degree requirements. The author is married to o o 227 APPROVAL OF EXAMINING COMMITTEE Dr. fa. ’Byrd, or. Dr. A. K.. Mallik DATE Dr . C. N. Redwlne (Chairman)

Enhancing Price Response Programs through Auto-DR: California's 2007 Implementation Experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiliccote, Sila; Wikler, Greg; Chiu, Albert

2007-12-18

This paper describes automated demand response (Auto-DR) activities, an innovative effort in California to ensure that DR programs produce effective and sustainable impacts. Through the application of automation and communication technologies coupled with well-designed incentives and DR programs such as Critical Peak Pricing (CPP) and Demand Bidding (DBP), Auto-DR is opening up the opportunity for many different types of buildings to effectively participate in DR programs. We present the results of Auto-DR implementation efforts by the three California investor-owned utilities for the Summer of 2007. The presentation emphasizes Pacific Gas and Electric Company's (PG&E) Auto-DR efforts, which represents the largestmore » in the state. PG&E's goal was to recruit, install, test and operate 15 megawatts of Auto-DR system capability. We describe the unique delivery approaches, including optimizing the utility incentive structures designed to foster an Auto-DR service provider community. We also show how PG&E's Critical Peak Pricing (CPP) and Demand Bidding (DBP) options were called and executed under the automation platform. Finally, we show the results of the Auto-DR systems installed and operational during 2007, which surpassed PG&E's Auto-DR goals. Auto-DR is being implemented by a multi-disciplinary team including the California Investor Owned Utilities (IOUs), energy consultants, energy management control system vendors, the Lawrence Berkeley National Laboratory (LBNL), and the California Energy Commission (CEC).« less

Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference & APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

NASA Astrophysics Data System (ADS)

2016-02-01

The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme "Materials, Manufacturing and Systems for Tomorrow". For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC & APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on "Nanomaterials with Exceptional Properties Synthesized through Top Down Approach”, which was warmly welcomed by an eager and highly motivated audience. The second keynote speaker was Prof. Ir. Dradjad Irianto (ITB, Indonesia) on “Collaborative Manufacturing for Small-medium Enterprises”. The organizers are very grateful to them for supporting the conference and sharing their latest research results with the conference participants. The conference organizers would like to express our sincere gratitude and thanks to the honorary chairman Prof. Dato, Dr. Daing Nasir Ibrahim and Prof. Dr. Wan Azhar Wan Yusoff and organizing committee members of iMEC2015, Assoc. Prof. Dr. A.K. Prasada Rao (chairman), Dr. Ing. Mohd Azmir Mohd Azhari (co-chairman), and all committee members Assoc. Prof. Dr. Ahmad Razlan Yusoff, Assoc. Prof. Dr. Ismed Iskandar, Dr Noraini Mohd Razali, Dr Muhammed Nafis Osman Zahid, Dr Noor Mazni Ismail, Dr Izwan Ismail, Dr Zamzuri Hamedon, Dr Faiz Mohd Turan, Ms Suraya Sulaiman and secretariat Miss Zuryaty, Mrs Wan Norshihah, Mr. Mohd Khairulnazri and Mr Rafilah and also a million thanks to the steering committee from APCOMS Prof. Dr. Kadarsyah Suryadi, Prof. Dr. Bermawi, P. Iskandar, Prof. Dr. Abdul Hakim Halim, Prof. Dr. Dradjad Irianto, Dr. TMA Ari Samadhi, Ir. I Made Dana Tangkas and APCOMS organizing committee Prof. Dr. Abdul Hakim Halim (chair), Dr. Rachmawati Wangsaputra (co-chair) and other committee members Dr. Iwan Inrawan Wiratmadja, Dr. Anas Ma'ruf, Dr. Sukoyo and Dr. Wisnu Aribowo. The editorial board are indebted to all of the reviewers who were willing to spend their precious time in reviewing the papers. Thanks also to all who contributed direct or indirectly in making this conference a success, especially Mr. Mohd Khairulnazri in helping the editors complete the proceedings. Dr. Zamzuri Hamedon Editor in-chief iMEC & APCOMS 2015 Associate Editors 1. Assoc. Prof. Dr. A.K. Prasada Rao 2. Assoc. Prof. Dr. Ahmad Razlan Yusoff 3. Dr. Ing. Mohd Azmir Mohd Azhari 4. Dr. Muhammed Nafis Osman Zahid 5. Dr. Faiz Mohd Turan

78 FR 66105 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

... the Kingpin Act. Individuals 1. CALLE QUIROS, Luis Santiago, Madrid, Spain; Lima, Peru; DOB 22 Jul 1965; POB Madrid, Spain; citizen Spain; alt. citizen Peru; D.N.I. 01927713-Z (Spain); alt. D.N.I. 10831176-8 (Peru) (individual) [SDNTK] (Linked To: TEXTIMAX SPAIN S.L.; Linked To: CASTIZAL MADRILENA S.L...

[Gene and haplotype frequencies for the loci HLA-A, B and DRB1 in 11755 north Chinese Han bone marrow registry donors].

PubMed

Wu, Qiang-Ju; Liu, Meng-Li; Qi, Jun; Liu, Sheng; Zhang, Yan; Wei, Xiao-Qian

2007-04-01

The study was aimed to investigate the human leukocyte antigen (HLA)-A, B, DRB1 alleles and haplotype frequencies and the characteristics of linkage disequilibrium in north Chinese Han bone marrow donors. HLA phenotype data of 11 755 north Chinese Han bone marrow donors were identified by PCR-SSP and PCR-SSO. HLA-A, B, DRB1 allele and haplotype frequencies were calculated by computer software named Arleguin which was based on Expectation-Maximization (EM) algorithms. The results showed that the population of 11755 unrelated-donors was tested by Hardy-Weinberg equilibrium, and 18,42 and 15 specificities of HLA alleles were identified on the HLA-A, B, DRB1 locus respectively, including HLA-A25, B42, B53, B73 and DR3 which were rarely reported in Han population. HLA-A36, A43, A80, B78, B82 and DR18 were not detected in this study. The most frequent alleles with a frequency of over 0.05 were HLA-A*02, A*11, A*24, A*33, A*30, A*01, A*03, A*13, B62, B*51, B*46, B60, B61, B*35, B*44, DRB1*15, DRB1*09, DRB1*04, DRB1*07, DRB1*12, DRB1*11, DRB1*14, DRB1*08, DRB1*13. There were a total of 2 026 kinds of HLA-A-B-DR haplotypes (with a frequency of over 10(-6)) to be obtained. The each frequency of 26 kinds of three-locus haplotypes including HLA-A30-B13-DR7, A2-B46-DR9, A33-B58-DR17 etc was higher than 0.005. A30-B13-DR7 was the most frequent haplotype in north Chinese Han population. There were a total of 538 kinds of haplotypes for HLA-A-B, 227 kinds for A-DR and 522 kinds for B-DR to be obtained, and there were 409, 195, 423 kinds of haplotypes respectively with a frequency higher than 10 - 6. There were 28 kinds of HLA-A-B haplotypes including A30-B13, A2-B46, A33-B58 etc, 26 kinds of HLA-A-DR haplotypes including A2-DR9, A2-DR15, A30-DR7 etc, and 24 kinds of HLA-B-DR haplotypes including B13-DR7, B46-DR9, B13-DR12 etc with a frequency higher than 0.01. 296 (72%) kinds of HLA-A-B, 130 (67%) kinds of A-DR and 308 (73%) kinds of B-DR haplotypes were statistical linkage disequilibrium. HLA-A30-B13, A33-B58, A1-B37, A30-DR7, A33-DR13, A1-DR10, B37-DR10, B8-DR17, B13-DR7, B58-DR17 were significant positive linkage disequilibrium. It is concluded that this HLA-A, B, DRB1 gene and haplotype frequencies and linkage disequilibrium data with the largest sample size up to now is unique in north Chinese Han population. The study will be helpful to find matched donors for patients and establish the important foundation for further studying of transplantation immunity, HLA-related diseases and population genetics of this area.

Transitioning to digital radiography.

PubMed

Drost, Wm Tod

2011-04-01

To describe the different forms of digital radiography (DR), image file formats, supporting equipment and services required for DR, storage of digital images, and teleradiology. Purchasing a DR system is a major investment for a veterinary practice. Types of DR systems include computed radiography, charge coupled devices, and direct or indirect DR. Comparison of workflow for analog and DR is presented. On the surface, switching to DR involves the purchase of DR acquisition hardware. The X-ray machine, table and grids used in analog radiography are the same for DR. Realistically, a considerable infrastructure supports the image acquisition hardware. This infrastructure includes monitors, computer workstations, a robust computer network and internet connection, a plan for storage and back up of images, and service contracts. Advantages of DR compared with analog radiography include improved image quality (when used properly), ease of use (more forgiving to the errors of radiographic technique), speed of making a complete study (important for critically ill patients), fewer repeat radiographs, less time looking for imaging studies, less physical storage space, and the ability to easily send images for consultation. With an understanding of the infrastructure requirements, capabilities and limitations of DR, an informed veterinary practice should be better able to make a sound decision about transitioning to DR. © Veterinary Emergency and Critical Care Society 2011.

A phase III study evaluating the efficacy and safety of MBP8298 in secondary progressive MS.

PubMed

Freedman, M S; Bar-Or, A; Oger, J; Traboulsee, A; Patry, D; Young, C; Olsson, T; Li, D; Hartung, H-P; Krantz, M; Ferenczi, L; Verco, T

2011-10-18

To evaluate the efficacy and safety of MBP8298 in subjects with secondary progressive multiple sclerosis (SPMS) who express human leukocyte antigen (HLA) haplotype DR2 or DR4 (DR2(+) or DR4(+)). This multicenter randomized 2-year, double-blind, placebo-controlled study included 612 subjects with a diagnosis of SPMS and an Expanded Disability Status Scale (EDSS) score of 3.5-6.5, stratified according to baseline EDSS score (3.5-5.0, or 5.5-6.5) and HLA haplotype (DR2(+) or DR4(+), or DR2(-)/DR4(-)). Upon entry of 100 DR2(-)/DR4(-) subjects, further study enrollment was limited to DR2(+) or DR4(+) subjects. Subjects were randomly assigned to either 500 mg MBP8298 or placebo, given by IV injection once every 6 months for 2 years. The primary outcome measure was time to progression by ≥1.0 EDSS point (or 0.5 point if baseline EDSS was 5.5 or higher), confirmed 6 months later. Secondary outcomes included mean change in EDSS, mean change in Multiple Sclerosis Functional Composite, MRI changes, annualized relapse rate, and quality of life. There were no significant differences between treatment groups in either the primary or secondary endpoints. MBP8298 was well tolerated in all treated subjects with no safety issues identified. In the population studied, treatment with MBP8298 did not provide a clinical benefit compared to placebo. This study provides Class 1 evidence that MBP8298 is not effective in patients with SPMS who are HLA DR2(+) or DR4(+).

Glutamatergic input is selectively increased in dorsal raphe subfield 5-HT neurons: role of morphology, topography and selective innervation.

PubMed

Crawford, LaTasha K; Craige, Caryne P; Beck, Sheryl G

2011-12-01

Characterization of glutamatergic input to dorsal raphe (DR) serotonin (5-HT) neurons is crucial for understanding how the glutamate and 5-HT systems interact in psychiatric disorders. Markers of glutamatergic terminals, vGlut1, 2 and 3, reflect inputs from specific forebrain and midbrain regions. Punctate staining of vGlut2 was homogeneous throughout the mouse DR whereas vGlut1 and vGlut3 puncta were less dense in the lateral wing (lwDR) compared with the ventromedial (vmDR) subregion. The distribution of glutamate terminals was consistent with the lower miniature excitatory postsynaptic current frequency found in the lwDR; however, it was not predictive of glutamatergic synaptic input with local activity intact, as spontaneous excitatory postsynaptic current (sEPSC) frequency was higher in the lwDR. We examined the morphology of recorded cells to determine if variations in dendrite structure contributed to differences in synaptic input. Although lwDR neurons had longer, more complex dendrites than vmDR neurons, glutamatergic input was not correlated with dendrite length in the lwDR, suggesting that dendrite length did not contribute to subregional differences in sEPSC frequency. Overall, glutamatergic input in the DR was the result of selective innervation of subpopulations of 5-HT neurons and was rooted in the topography of DR neurons and the activity of glutamate neurons located within the midbrain slice. Increased glutamatergic input to lwDR cells potentially synergizes with previously reported increased intrinsic excitability of lwDR cells to increase 5-HT output in lwDR target regions. Because the vmDR and lwDR are involved in unique circuits, subregional differences in glutamate modulation may result in diverse effects on 5-HT output in stress-related psychopathology. © 2011 The Authors. European Journal of Neuroscience © 2011 Federation of European Neuroscience Societies and Blackwell Publishing Ltd.

2K09 and thereafter : the coming era of integrative bioinformatics, systems biology and intelligent computing for functional genomics and personalized medicine research.

PubMed

Yang, Jack Y; Niemierko, Andrzej; Bajcsy, Ruzena; Xu, Dong; Athey, Brian D; Zhang, Aidong; Ersoy, Okan K; Li, Guo-Zheng; Borodovsky, Mark; Zhang, Joe C; Arabnia, Hamid R; Deng, Youping; Dunker, A Keith; Liu, Yunlong; Ghafoor, Arif

2010-12-01

Significant interest exists in establishing synergistic research in bioinformatics, systems biology and intelligent computing. Supported by the United States National Science Foundation (NSF), International Society of Intelligent Biological Medicine (http://www.ISIBM.org), International Journal of Computational Biology and Drug Design (IJCBDD) and International Journal of Functional Informatics and Personalized Medicine, the ISIBM International Joint Conferences on Bioinformatics, Systems Biology and Intelligent Computing (ISIBM IJCBS 2009) attracted more than 300 papers and 400 researchers and medical doctors world-wide. It was the only inter/multidisciplinary conference aimed to promote synergistic research and education in bioinformatics, systems biology and intelligent computing. The conference committee was very grateful for the valuable advice and suggestions from honorary chairs, steering committee members and scientific leaders including Dr. Michael S. Waterman (USC, Member of United States National Academy of Sciences), Dr. Chih-Ming Ho (UCLA, Member of United States National Academy of Engineering and Academician of Academia Sinica), Dr. Wing H. Wong (Stanford, Member of United States National Academy of Sciences), Dr. Ruzena Bajcsy (UC Berkeley, Member of United States National Academy of Engineering and Member of United States Institute of Medicine of the National Academies), Dr. Mary Qu Yang (United States National Institutes of Health and Oak Ridge, DOE), Dr. Andrzej Niemierko (Harvard), Dr. A. Keith Dunker (Indiana), Dr. Brian D. Athey (Michigan), Dr. Weida Tong (FDA, United States Department of Health and Human Services), Dr. Cathy H. Wu (Georgetown), Dr. Dong Xu (Missouri), Drs. Arif Ghafoor and Okan K Ersoy (Purdue), Dr. Mark Borodovsky (Georgia Tech, President of ISIBM), Dr. Hamid R. Arabnia (UGA, Vice-President of ISIBM), and other scientific leaders. The committee presented the 2009 ISIBM Outstanding Achievement Awards to Dr. Joydeep Ghosh (UT Austin), Dr. Aidong Zhang (Buffalo) and Dr. Zhi-Hua Zhou (Nanjing) for their significant contributions to the field of intelligent biological medicine.

2K09 and thereafter : the coming era of integrative bioinformatics, systems biology and intelligent computing for functional genomics and personalized medicine research

PubMed Central

2010-01-01

Significant interest exists in establishing synergistic research in bioinformatics, systems biology and intelligent computing. Supported by the United States National Science Foundation (NSF), International Society of Intelligent Biological Medicine (http://www.ISIBM.org), International Journal of Computational Biology and Drug Design (IJCBDD) and International Journal of Functional Informatics and Personalized Medicine, the ISIBM International Joint Conferences on Bioinformatics, Systems Biology and Intelligent Computing (ISIBM IJCBS 2009) attracted more than 300 papers and 400 researchers and medical doctors world-wide. It was the only inter/multidisciplinary conference aimed to promote synergistic research and education in bioinformatics, systems biology and intelligent computing. The conference committee was very grateful for the valuable advice and suggestions from honorary chairs, steering committee members and scientific leaders including Dr. Michael S. Waterman (USC, Member of United States National Academy of Sciences), Dr. Chih-Ming Ho (UCLA, Member of United States National Academy of Engineering and Academician of Academia Sinica), Dr. Wing H. Wong (Stanford, Member of United States National Academy of Sciences), Dr. Ruzena Bajcsy (UC Berkeley, Member of United States National Academy of Engineering and Member of United States Institute of Medicine of the National Academies), Dr. Mary Qu Yang (United States National Institutes of Health and Oak Ridge, DOE), Dr. Andrzej Niemierko (Harvard), Dr. A. Keith Dunker (Indiana), Dr. Brian D. Athey (Michigan), Dr. Weida Tong (FDA, United States Department of Health and Human Services), Dr. Cathy H. Wu (Georgetown), Dr. Dong Xu (Missouri), Drs. Arif Ghafoor and Okan K Ersoy (Purdue), Dr. Mark Borodovsky (Georgia Tech, President of ISIBM), Dr. Hamid R. Arabnia (UGA, Vice-President of ISIBM), and other scientific leaders. The committee presented the 2009 ISIBM Outstanding Achievement Awards to Dr. Joydeep Ghosh (UT Austin), Dr. Aidong Zhang (Buffalo) and Dr. Zhi-Hua Zhou (Nanjing) for their significant contributions to the field of intelligent biological medicine. PMID:21143775

Royal Australian and New Zealand College of Psychiatrists clinical practice guidelines for mood disorders.

PubMed

Malhi, Gin S; Bassett, Darryl; Boyce, Philip; Bryant, Richard; Fitzgerald, Paul B; Fritz, Kristina; Hopwood, Malcolm; Lyndon, Bill; Mulder, Roger; Murray, Greg; Porter, Richard; Singh, Ajeet B

2015-12-01

To provide guidance for the management of mood disorders, based on scientific evidence supplemented by expert clinical consensus and formulate recommendations to maximise clinical salience and utility. Articles and information sourced from search engines including PubMed and EMBASE, MEDLINE, PsycINFO and Google Scholar were supplemented by literature known to the mood disorders committee (MDC) (e.g., books, book chapters and government reports) and from published depression and bipolar disorder guidelines. Information was reviewed and discussed by members of the MDC and findings were then formulated into consensus-based recommendations and clinical guidance. The guidelines were subjected to rigorous successive consultation and external review involving: expert and clinical advisors, the public, key stakeholders, professional bodies and specialist groups with interest in mood disorders. The Royal Australian and New Zealand College of Psychiatrists clinical practice guidelines for mood disorders (Mood Disorders CPG) provide up-to-date guidance and advice regarding the management of mood disorders that is informed by evidence and clinical experience. The Mood Disorders CPG is intended for clinical use by psychiatrists, psychologists, physicians and others with an interest in mental health care. The Mood Disorder CPG is the first Clinical Practice Guideline to address both depressive and bipolar disorders. It provides up-to-date recommendations and guidance within an evidence-based framework, supplemented by expert clinical consensus. Professor Gin Malhi (Chair), Professor Darryl Bassett, Professor Philip Boyce, Professor Richard Bryant, Professor Paul Fitzgerald, Dr Kristina Fritz, Professor Malcolm Hopwood, Dr Bill Lyndon, Professor Roger Mulder, Professor Greg Murray, Professor Richard Porter and Associate Professor Ajeet Singh. Professor Carlo Altamura, Dr Francesco Colom, Professor Mark George, Professor Guy Goodwin, Professor Roger McIntyre, Dr Roger Ng, Professor John O'Brien, Professor Harold Sackeim, Professor Jan Scott, Dr Nobuhiro Sugiyama, Professor Eduard Vieta, Professor Lakshmi Yatham. Professor Marie-Paule Austin, Professor Michael Berk, Dr Yulisha Byrow, Professor Helen Christensen, Dr Nick De Felice, A/Professor Seetal Dodd, A/Professor Megan Galbally, Dr Josh Geffen, Professor Philip Hazell, A/Professor David Horgan, A/Professor Felice Jacka, Professor Gordon Johnson, Professor Anthony Jorm, Dr Jon-Paul Khoo, Professor Jayashri Kulkarni, Dr Cameron Lacey, Dr Noeline Latt, Professor Florence Levy, A/Professor Andrew Lewis, Professor Colleen Loo, Dr Thomas Mayze, Dr Linton Meagher, Professor Philip Mitchell, Professor Daniel O'Connor, Dr Nick O'Connor, Dr Tim Outhred, Dr Mark Rowe, Dr Narelle Shadbolt, Dr Martien Snellen, Professor John Tiller, Dr Bill Watkins, Dr Raymond Wu. © The Royal Australian and New Zealand College of Psychiatrists 2015.

Wernher von Braun

NASA Image and Video Library

1966-06-21

Dr. Joseph Randall, a laser expert at Marshall Space Flight Center (MSFC), explains one of the projects he is working on to a group composed of Federal Republic of Germany and MSFC officials. From left are: Dr. Randall; Minister for Scientific Research of Federal Republic of Germany, Dr. Gerhard Stolenberg; Director of MSFC Astrionics Lab, Dr. Walter Haeusserman; Head of Space Research Federal Republic of Germany, Max Mayer; MSFC Director Dr. von Braun; MSFC Deputy Director Dr. Elberhard Rees.

SIAM Data Mining Brings It’ to Annual Meeting

DTIC Science & Technology

2017-02-24

address space) languages. Jose Moreira and Manoj Kumar from IBM presented the Graph Programming Interface (GPI) as well as a proposal for a common...Samsi (MIT), Dr. Manoj Kumar (IBM Research), Dr. Michel Kinsy (Boston University), and Dr. Shashank Yellapantula (GE Global Research). Dr. Gadepally...and Dr. Samsi discussed advances in data management technologies [22–25], and Dr. Kumar presented a brief overview of a graph-based API IBM is

Hydrographic Data from the Pilot Study of the Coastal Transition Zone (CTZ) Program, 15-28 June 1987

DTIC Science & Technology

1989-04-01

8217i Wi Ui L6 LOlaa to LO to 0 a. ’U ’𔃺I’ N W Oa ON4’𔃺 C40 W4010404 r4 10 r% r - ’ : r a . ) - ’ : - : 0 ’n p 4 44 * t*- Ka 0I 0A I 0A 000)In "i pq m...OR 97331 Dr. Robert L. Smith 1 Dr. Adriana Huyer 1 Dr. P. Michael Kosro I Dr. Mark R. Abbott 1 Dr. John S. Allen I Dr. Tim Cowles 1 Dr. David Kadco

Report on "Methodologies for Investigating Microbial-Mineral Interactions: A Clay Minerals Society Short Course"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maurice, Patricia A.

2010-02-08

A workshop entitled, “Methods of Investigating Microbial-Mineral Interactions,” was held at the Clay Minerals Society meeting at the Pacific Northwest National Laboratory in Richland, WA on June 19, 2004. The workshop was organized by Patricia A. Maurice (University of Notre Dame) and Lesley A. Warren (McMaster University, CA). Speakers included: Dr. P. Bennett, Dr. J. Fredrickson (PNNL), Dr. S. Lower (Ohio State University), Dr. P. Maurice, Dr. S. Myneni (Princeton University), Dr. E. Shock (Arizona State), Dr. M. Tien (Penn State), Dr. L. Warren, and Dr. J. Zachara (PNNL). There were approximately 75 attendees at the workshop, including more thanmore » 20 students. A workshop volume was published by the Clay Minerals Society [Methods for Study of Microbe-Mineral Interactions (2006), CMS Workshop Lectures, vol 14(Patricia A. Maurice and Leslie A. Warren, eds.) ISBN 978-1-881208-15-0, 166 pp.]« less

VizieR Online Data Catalog: KODIAQ DR2 (O'Meara+, 2017)

NASA Astrophysics Data System (ADS)

O'Meara, J. M.; Lehner, N.; Howk, J. C.; Prochaska, J. X.; Fox, A. J.; Peeples, M. S.; Tumlinson, J.; O'Shea, B. W.

2018-02-01

The new data presented here in DR2 all stem from High-Resolution Echelle Spectrograph (HIRES) observations by multiple PIs between 1995 and 2004. Table1 presents the HIRES deckers used across DR2 and their corresponding spectral resolution. As with DR1, the majority of observations were made with the C1 or C5 decker providing ~6 and ~8km/s FWHM resolution, respectively. The Keck Observatory Database of Ionized Absorption toward Quasars (KODIAQ) DR2 comprises HIRES observations of 300 quasar lines of sight in total. Of these, 130 quasar sight lines are new since DR1 (O'Meara et al. 2015, Cat. J/AJ/150/111), along with many new additional observations of some of the DR1 quasars. Table2 presents the new data since DR1. Table3 presents the full DR2 sample of 300 quasars. (3 data files).

Effectiveness of panretinal photocoagulation in severe diabetic retinopathy

NASA Astrophysics Data System (ADS)

Astakhov, Yuri S.; Shadrichev, Fedor Y.; Lisochkina, Alla B.

1999-02-01

Diabetic Retinopathy (DR) is one of the most severe complications of diabetes mellitus. In 1994, in St. Petersburg, a new system of ophthalmologic care for diabetic patients was set up. For Russia, this system represents an example of adequate care for subjects with DM, including screening strategies, documentation and education of patients and general ophthalmologists. According to our data, about one half of examined patients had DR, and about 20% of patients were in need of laser treatment. The aim of present study was to evaluate the effectiveness of panretinal photocoagulation (PRP) in cases of severe DR, including advanced nonproliferative DR (preproliferative DR) and proliferative DR. Data concerning 1073 diabetics are included in this study. PRP was performed in 736 cases (1163 eyes). DR stabilization was estimated after one year follow-up PRP enabled preventing severe visual loss in patients with preproliferative DR and proliferative DR. Our system of specialized ophthalmic care for diabetic patients proved to be effective.

Oligonucleotide-genotyping as a method of detecting the HLA-DR2 (DRw15)-Dw2, -DR2 (DRw15)-Dw12, -DR4-Dw15, and -DR4-D"KT2" haplotypes in the Japanese population.

PubMed

Obata, F; Ito, I; Kaneko, T; Ohkubo, M; Ishimoto, A L; Abe, A; Kashiwagi, N

1989-05-01

We synthesized pairs of four different oligonucleotides, F22, F29, F42, and F158, to analyse the HLA-DR2 (DRw15) and -DR4 haplotypes in the Japanese population. After enzymatically amplifying the HLA-DRB1 gene, we hybridized the oligonucleotide probes with DNA extracted from 42 donors. Hybridization was completed between F22 and the DNA of haplotype DR2 (DRw15)-Dw2, between F29 and the DNA of DR2 (DRw15)-Dw12, between F42 and the DNA of DR4-D"KT2", and between F158 and the DNA of DR4-Dw15. In keeping with the nucleotide sequences of the probes, F29 hybridized also with DNA from the DR9-Dw23 haplotype and F158 with that from some of the DRw8 haplotypes (DRw8-Dw8.3) in the Japanese population. Results of this study demonstrate that the four oligonucleotides make useful probes for detecting the haplotypes above.

New knowledge network evaluation method for design rationale management

NASA Astrophysics Data System (ADS)

Jing, Shikai; Zhan, Hongfei; Liu, Jihong; Wang, Kuan; Jiang, Hao; Zhou, Jingtao

2015-01-01

Current design rationale (DR) systems have not demonstrated the value of the approach in practice since little attention is put to the evaluation method of DR knowledge. To systematize knowledge management process for future computer-aided DR applications, a prerequisite is to provide the measure for the DR knowledge. In this paper, a new knowledge network evaluation method for DR management is presented. The method characterizes the DR knowledge value from four perspectives, namely, the design rationale structure scale, association knowledge and reasoning ability, degree of design justification support and degree of knowledge representation conciseness. The DR knowledge comprehensive value is also measured by the proposed method. To validate the proposed method, different style of DR knowledge network and the performance of the proposed measure are discussed. The evaluation method has been applied in two realistic design cases and compared with the structural measures. The research proposes the DR knowledge evaluation method which can provide object metric and selection basis for the DR knowledge reuse during the product design process. In addition, the method is proved to be more effective guidance and support for the application and management of DR knowledge.

Gene-environment interaction between adiponectin gene polymorphisms and environmental factors on the risk of diabetic retinopathy.

PubMed

Li, Yuan; Wu, Qun Hong; Jiao, Ming Li; Fan, Xiao Hong; Hu, Quan; Hao, Yan Hua; Liu, Ruo Hong; Zhang, Wei; Cui, Yu; Han, Li Yuan

2015-01-01

To evaluate whether the adiponectin gene is associated with diabetic retinopathy (DR) risk and interaction with environmental factors modifies the DR risk, and to investigate the relationship between serum adiponectin levels and DR. Four adiponectin polymorphisms were evaluated in 372 DR cases and 145 controls. Differences in environmental factors between cases and controls were evaluated by unconditional logistic regression analysis. The model-free multifactor dimensionality reduction method and traditional multiple regression models were applied to explore interactions between the polymorphisms and environmental factors. Using the Bonferroni method, we found no significant associations between four adiponectin polymorphisms and DR susceptibility. Multivariate logistic regression found that physical activity played a protective role in the progress of DR, whereas family history of diabetes (odds ratio 1.75) and insulin therapy (odds ratio 1.78) were associated with an increased risk for DR. The interaction between the C-11377 G (rs266729) polymorphism and insulin therapy might be associated with DR risk. Family history of diabetes combined with insulin therapy also increased the risk of DR. No adiponectin gene polymorphisms influenced the serum adiponectin levels. Serum adiponectin levels did not differ between the DR group and non-DR group. No significant association was identified between four adiponectin polymorphisms and DR susceptibility after stringent Bonferroni correction. The interaction between C-11377G (rs266729) polymorphism and insulin therapy, as well as the interaction between family history of diabetes and insulin therapy, might be associated with DR susceptibility.

A dangerous movie? Hollywood does psychoanalysis.

PubMed

Ferrell, Donald R; Silverman, Martin A

2014-12-01

After the appearance of David Cronenberg's film A Dangerous Method in 2011, dealing with the relationships of Sigmund Freud, C. G. Jung and Sabina Spielrein, Dr. Donald Ferrell published: A Dangerous Method, A Film Directed by David Cronenberg: An Extended Review (Ferrell 2012) in the Journal of Religion and Health. Upon its publication, Dr. Ferrell's article was nominated for a Gradiva Award by the National Association for the Advancement of Psychoanalysis. On November 1, 2013, the Association for the Psychoanalysis of Culture and Society held its annual conference at Rutgers University, New Brunswick, NJ. Dr. Billie Pivnick, a member at large of the Board of Directors of the APCS and also on the Editorial Board of the Journal of Religion and Health, persuaded the 2013 Conference Program Committee that Cronenberg's film would make an interesting subject for discussion for conference participants. To that end, Dr. Pivnick invited Dr. Ferrell, C. G. Jung Institute of New York, Dr. Steven Reisner, Coalition for an Ethical Psychology, and Dr. Martin Silverman, Training and Supervising Analyst and Supervising Child Analyst at the Institute for Psychoanalytic Education, NYU College of Medicine, Training and Supervising Analyst at the Center for Psychotherapy and Psychoanalysis of New Jersey, and Associate Editor of The Psychoanalytic Quarterly to serve as panel members to discuss: A Dangerous Movie? Hollywood does Psychoanalysis. Presentations on Cronenberg's film and the early history of psychoanalysis were given by Drs. Ferrell and Reisner, followed by a response to their presentations by Dr. Silverman. Dr. Pivnick chaired the session. The articles presented here were given originally at the APCS conference by Dr. Ferrell and Dr. Silverman. Dr. Reisner declined the invitation to submit his presentation for publication. Dr. Silverman's remarks were based not only on the presentation given by Dr. Ferrell at the session on A Dangerous Movie?, but also on his close and careful reading of the extended review of Cronenberg's film Dr. Ferrell published in the Journal of Religion and Health, as well as Dr. Reisner's presentation. It was appropriate for Dr. Silverman to serve in his capacity as discussant since he had earlier published a critical review of A Secret Symmetry. Sabina Spielrein Between Jung and Freud by Aldo Carotenuto (Silverman 1985).

Carbon-doped single-crystalline SiGe/Si thermistor with high temperature coefficient of resistance and low noise level

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radamson, H. H.; Kolahdouz, M.; Shayestehaminzadeh, S.

2010-11-29

SiGe (C)/Si(C) multiquantum wells have been studied as a thermistor material for future bolometers. A thermistor material for uncooled Si-based thermal detectors with thermal coefficient of resistance of 4.5%/K for 100x100 {mu}m{sup 2} pixel sizes and low noise constant (K{sub 1/f}) value of 4.4x10{sup -15} is presented. The outstanding performance of the devices is due to Ni-silicide contacts, smooth interfaces, and high quality multiquantum wells containing high Ge content.

Non-linear vibrational response of Ge and SiC membranes

NASA Astrophysics Data System (ADS)

Zhou, L. Q.; Colston, G.; Pearce, M. J.; Prince, R. G.; Myronov, M.; Leadley, D. R.; Trushkevych, O.; Edwards, R. S.

2017-07-01

Characterisation of membranes produced for use as micro-electro-mechanical systems using vibrational techniques can give a measure of their behaviour and suitability for operation in different environments. Two membranes are studied here: germanium (Ge) and cubic silicon carbide (3C-SiC) on a silicon (Si) substrate. When driven at higher displacements, the membranes exhibit self-protecting behaviour. The resonant vibration amplitude is limited to a maximum value of around 10 nm, through dissipation of energy via higher harmonic vibrations. This is observed for both materials, despite their different Young's moduli and defect densities.

Active zinc-blende III-nitride photonic structures on silicon

NASA Astrophysics Data System (ADS)

Sergent, Sylvain; Kako, Satoshi; Bürger, Matthias; Blumenthal, Sarah; Iwamoto, Satoshi; As, Donat Josef; Arakawa, Yasuhiko

2016-01-01

We use a layer transfer method to fabricate free-standing photonic structures in a zinc-blende AlN epilayer grown by plasma-assisted molecular beam epitaxy on a 3C-SiC pseudosubstrate and containing GaN quantum dots. The method leads to the successful realization of microdisks, nanobeam photonic crystal cavities, and waveguides integrated on silicon (100) and operating at short wavelengths. We assess the quality of such photonic elements by micro-photoluminescence spectroscopy in the visible and ultraviolet ranges, and extract the absorption coefficient of ZB AlN membranes (α ˜ (2-5) × 102 cm-1).

Inward rectifier potassium current (I K1) and Kir2 composition of the zebrafish (Danio rerio) heart.

PubMed

Hassinen, Minna; Haverinen, Jaakko; Hardy, Matt E; Shiels, Holly A; Vornanen, Matti

2015-12-01

Electrophysiological properties and molecular background of the zebrafish (Danio rerio) cardiac inward rectifier current (IK1) were examined. Ventricular myocytes of zebrafish have a robust (-6.7 ± 1.2 pA pF(-1) at -120 mV) strongly rectifying and Ba(2+)-sensitive (IC50 = 3.8 μM) IK1. Transcripts of six Kir2 channels (drKir2.1a, drKir2.1b, drKir2.2a, drKir2.2b, drKir2.3, and drKir2.4) were expressed in the zebrafish heart. drKir2.4 and drKir2.2a were the dominant isoforms in both the ventricle (92.9 ± 1.5 and 6.3 ± 1.5%) and the atrium (28.9 ± 2.9 and 64.7 ± 3.0%). The remaining four channels comprised together less than 1 and 7 % of the total transcripts in ventricle and atrium, respectively. The four main gene products (drKir2.1a, drKir2.2a, drKir2.2b, drKir2.4) were cloned, sequenced, and expressed in HEK cells for electrophysiological characterization. drKir2.1a was the most weakly rectifying (passed more outward current) and drKir2.2b the most strongly rectifying (passed less outward current) channel, whilst drKir2.2a and drKir2.4 were intermediate between the two. In regard to sensitivity to Ba(2+) block, drKir2.4 was the most sensitive (IC50 = 1.8 μM) and drKir2.1a the least sensitive channel (IC50 = 132 μM). These findings indicate that the Kir2 isoform composition of the zebrafish heart markedly differs from that of mammalian hearts. Furthermore orthologous Kir2 channels (Kir2.1 and Kir2.4) of zebrafish and mammals show striking differences in Ba(2+)-sensitivity. Structural and functional differences needs to be taken into account when zebrafish is used as a model for human cardiac electrophysiology, cardiac diseases, and in screening cardioactive substances.

P2P proteomics -- data sharing for enhanced protein identification

PubMed Central

2012-01-01

Background In order to tackle the important and challenging problem in proteomics of identifying known and new protein sequences using high-throughput methods, we propose a data-sharing platform that uses fully distributed P2P technologies to share specifications of peer-interaction protocols and service components. By using such a platform, information to be searched is no longer centralised in a few repositories but gathered from experiments in peer proteomics laboratories, which can subsequently be searched by fellow researchers. Methods The system distributively runs a data-sharing protocol specified in the Lightweight Communication Calculus underlying the system through which researchers interact via message passing. For this, researchers interact with the system through particular components that link to database querying systems based on BLAST and/or OMSSA and GUI-based visualisation environments. We have tested the proposed platform with data drawn from preexisting MS/MS data reservoirs from the 2006 ABRF (Association of Biomolecular Resource Facilities) test sample, which was extensively tested during the ABRF Proteomics Standards Research Group 2006 worldwide survey. In particular we have taken the data available from a subset of proteomics laboratories of Spain's National Institute for Proteomics, ProteoRed, a network for the coordination, integration and development of the Spanish proteomics facilities. Results and Discussion We performed queries against nine databases including seven ProteoRed proteomics laboratories, the NCBI Swiss-Prot database and the local database of the CSIC/UAB Proteomics Laboratory. A detailed analysis of the results indicated the presence of a protein that was supported by other NCBI matches and highly scored matches in several proteomics labs. The analysis clearly indicated that the protein was a relatively high concentrated contaminant that could be present in the ABRF sample. This fact is evident from the information that could be derived from the proposed P2P proteomics system, however it is not straightforward to arrive to the same conclusion by conventional means as it is difficult to discard organic contamination of samples. The actual presence of this contaminant was only stated after the ABRF study of all the identifications reported by the laboratories. PMID:22293032

Impact of seeing and host galaxy into the analysis of photo-polarimetric microvariability in blazars. Case study of the nearby blazars 1ES 1959+650 and HB89 2201+044

NASA Astrophysics Data System (ADS)

Sosa, M. S.; von Essen, C.; Andruchow, I.; Cellone, S. A.

2017-11-01

Blazars, a type of Active Galactic Nuclei, present a particular orientation of their jets close to the line of sight. Their radiation is thus relativistically beamed, giving rise to extreme behaviors, specially strong variability on very short timescales (I.e., microvariability). Here we present simultaneous photometric and polarimetric observations of two relatively nearby blazars, 1ES 1959+650 and HB89 2201+044, that were obtained using the Calar Alto Faint Object Spectrograph mounted at the 2.2 m telescope in Calar Alto, Spain. An outstanding characteristic of these two blazars is the presence of well resolved host galaxies. This particular feature allows us to produce a study of their intrinsic polarization, a measurement of the polarization state of the galactic nucleus unaffected by the host galaxy. To carry out this work, we computed photometric fluxes from which we calculated the degree and orientation of the blazars polarization. Then, we analyzed the depolarizing effect introduced by the host galaxy with the main goal to recover the intrinsic polarization of the galactic nucleus, carefully taking into consideration the spurious polarimetric variability introduced by changes in seeing along the observing nights. We find that the two blazars do not present intra-night photo-polarimetric variability, although we do detect a significant inter-night variability. Comparing polarimetric values before and after accounting for the host galaxies, we observe a significant difference in the polarization degree of about 1% in the case of 1ES 1959+650, and 0.3% in the case of HB89 2201+044, thus evidencing the non-negligible impact introduced by the host galaxies. We note that this host galaxy effect depends on the waveband, and varies with changing seeing conditions, so it should be particularly considered when studying frequency-dependent polarization in blazars. Based on observations collected at the Centro Astronómico Hispano Alemán (CAHA) at Calar Alto, operated jointly by the Max-Planck Institut für Astronomie and the Instituto de Astrofísica de Andalucía (CSIC).

Phytophthora niederhauserii sp. nov., a polyphagous species associated with ornamentals, fruit trees and native plants in 13 countries.

PubMed

Abad, Z Gloria; Abad, Jorge A; Cacciola, Santa Olga; Pane, Antonella; Faedda, Roberto; Moralejo, Eduardo; Pérez-Sierra, Ana; Abad-Campos, Paloma; Alvarez-Bernaola, Luis A; Bakonyi, József; Józsa, András; Herrero, Maria Luz; Burgess, Treena I; Cunnington, James H; Smith, Ian W; Balci, Yilmaz; Blomquist, Cheryl; Henricot, Béatrice; Denton, Geoffrey; Spies, Chris; Mcleod, Adele; Belbahri, Lassaad; Cooke, David; Kageyama, Koji; Uematsu, Seiji; Kurbetli, Ilker; Değirmenci, Kemal

2014-01-01

A non-papillate, heterothallic Phytophthora species first isolated in 2001 and subsequently from symptomatic roots, crowns and stems of 33 plant species in 25 unrelated botanical families from 13 countries is formally described here as a new species. Symptoms on various hosts included crown and stem rot, chlorosis, wilting, leaf blight, cankers and gumming. This species was isolated from Australia, Hungary, Israel, Italy, Japan, the Netherlands, Norway, South Africa, Spain, Taiwan, Turkey, the United Kingdom and United States in association with shrubs and herbaceous ornamentals grown mainly in greenhouses. The most prevalent hosts are English ivy (Hedera helix) and Cistus (Cistus salvifolius). The association of the species with acorn banksia (Banksia prionotes) plants in natural ecosystems in Australia, in affected vineyards (Vitis vinifera) in South Africa and almond (Prunus dulcis) trees in Spain and Turkey in addition to infection of shrubs and herbaceous ornamentals in a broad range of unrelated families are a sign of a wide ecological adaptation of the species and its potential threat to agricultural and natural ecosystems. The morphology of the persistent non-papillate ellipsoid sporangia, unique toruloid lobate hyphal swellings and amphigynous antheridia does not match any of the described species. Phylogenetic analysis based on sequences of the ITS rDNA, EF-1α, and β-tub supported that this organism is a hitherto unknown species. It is closely related to species in ITS clade 7b with the most closely related species being P. sojae. The name Phytophthora niederhauserii has been used in previous studies without the formal description of the holotype. This name is validated in this manuscript with the formal description of Phytophthora niederhauserii Z.G. Abad et J.A. Abad, sp. nov. The name is coined to honor Dr John S. Niederhauser, a notable plant pathologist and the 1990 World Food Prize laureate. © 2014 by The Mycological Society of America.

Eating habits modulate short term memory and epigenetical regulation of brain derived neurotrophic factor in hippocampus of low- and high running capacity rats.

PubMed

Torma, Ferenc; Bori, Zoltan; Koltai, Erika; Felszeghy, Klara; Vacz, Gabriella; Koch, Lauren; Britton, Steven; Boldogh, Istvan; Radak, Zsolt

2014-08-01

Exercise capacity and dietary restriction (DR) are linked to improved quality of life, including enhanced brain function and neuro-protection. Brain derived neurotrophic factor (BDNF) is one of the key proteins involved in the beneficial effects of exercise on brain. Low capacity runner (LCR) and high capacity runner (HCR) rats were subjected to DR in order to investigate the regulation of BDNF. HCR-DR rats out-performed other groups in a passive avoidance test. BDNF content increased significantly in the hippocampus of HCR-DR groups compared to control groups (p<0.05). The acetylation of H3 increased significantly only in the LCR-DR group. However, chip-assay revealed that the specific binding between acetylated histone H3 and BNDF promoter was increased in both LCR-DR and HCR-DR groups. In spite of these increases in binding, at the transcriptional level only, the LCR-DR group showed an increase in BDNF mRNA content. Additionally, DR also induced the activity of cAMP response element-binding protein (CREB), while the content of SIRT1 was not altered. Peroxisome proliferator-activated receptor gamma coactivator-1 alpha (PGC-1α) was elevated in HCR-DR groups. But, based on the levels of nuclear respiratory factor-1 and cytocrome c oxidase, it appears that DR did not cause mitochondrial biogenesis. The data suggest that DR-mediated induction of BDNF levels includes chromatin remodeling. Moreover, DR does not induce mitochondrial biogenesis in the hippocampus of LCR/HCR rats. DR results in different responses to a passive avoidance test, and BDNF regulation in LCR and HCR rats. Copyright © 2014 Elsevier Inc. All rights reserved.

Oversight hearings on P. L. 93-577, ERDA Plan and Program. Hearings before the Subcommittee on Energy Research, Development and Demonstration of the Committee on Science and Technology, U. S. House of Representatives, Ninety-Fourth Congress, Second Session

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1976-01-01

The purpose of the hearings was to examine the comprehensive plan and program for dealing with energy that ERDA submitted to Congress on June 30, 1975. Included as an appendix to these hearings is the October 1975 report of the Office of Technology Assessment (OTA) entitled, ''An Analysis of the ERDA Plan and Program'' (for abstract of this report, see EAPA 2:79). Testifying on Jan. 22 was the director of OTA, Emilio Q. Daddario, and chairmen of various task groups that assisted in the ERDA analysis, namely: Dr. John Gibbons, Conservation; Dr. Paul Craig, Overview Panel; Dr. Alvin Weinberg, Nuclear;more » Dr. Stanford S. Penner, Environmental and Health; and Dr. Jerry Grey, Solar; also present, and participating in the question and answer portion was Lionel Johns, head of the energy projects and programs in OTA. Testifying at the Jan. 23 hearings were experts presenting environmental, scientific, and engineering viewpoints, namely: Dr. Donald McDonald, director of the environmental studies program at Dartmouth College; Dr. Reginald Vachon, Auburn University, representing the American Society of Mechanical Engineers; and Dr. Thomas Lee, General Electric Co., representing the Inst. of Electrical and Electronics Engineers. The final hearings on Jan. 29 included the testimony of Dr. Robert W. Fri, Deputy Administrator, ERDA, and that of each of five assistant administrators: Dr. John Teem, Solar, Geothermal, and Advanced Energy Systems; Dr. Austin Heller, Conservation; Dr. Richard W. Roberts, Nuclear Energy; Dr. Roger W. A. LeGassie, Planning and Analysis; and Dr. James Liverman, Environment and Safety. (LMT)« less

High resolution studies of sunspots and flux tubes

NASA Technical Reports Server (NTRS)

Title, Alan

1994-01-01

This contract is for a three-year research study of sunspots and magnetic flux tubes in the solar atmosphere, using tunable filter images collected with a CCD camera during observing runs at the Canary Islands observatories in Spain. The best observations are analyzed and compared with theoretical models, to study the structure and dynamics of sunspots, their connections with surrounding magnetic fields, and the properties and evolution of smaller flux tubes in plage and quiet sun. Scientific results are reported at conferences and published in the appropriate journals. The contract is being performed by the Solar and Astrophysics Laboratory, part of the Lockheed Palo Alto Research Laboratory (LPARL) of the Research and Development Division (RDD) of Lockheed Missiles and Space Co., Inc. (LMSC). The principal investigator is Dr. Alan Title, and the research is done by him and other scientific staff at LPARL and Solar Physics Research Corporation (SPRC), often in collaboration with visiting scientists and students from other institutions. Highlights during this reporting period include completing the final version of a paper on the Evershed effect, writing a paper on magnetic diffusion, continuing work on contrast of small flux tubes, and work on the development of new models to interpret our sunspots observations.

Birth of the Angle Society of Europe.

PubMed

Jacquin, Michel

2006-01-01

The history of the Angle Society of Europe began in 1971 with the meeting of two men: Juan Canut from Spain and Ernst Hösl from Germany. They decided to launch the idea of an association to get ready for the emergence of a new wave of Orthodontics in Europe. The first step was the creation of a Society with small groups of fourteen Orthodontists. The very first principle to be followed was "the plaster on the table" demonstration together with presentations on clinical or general interest subjects. The First Official Meeting took place in Zurich. 32 initial members were in attendance trying to set up the requirements for the development of a high quality Society. The second meeting focused on a scientific program centered on Treatment Timing Topic and the emergence of a new set of Bylaws. The third meeting was devoted to the display of 215 treated cases presented by temporary members to be evaluated by a Scientific Committee under the presidency of Dr. Alton Moore as official representative of the USA Edward H. Angle Society of Orthodontists. The following meetings demonstrated a constant and well monitored increase of new candidates and active members motivated to reach the required excellence level.

Enhancing the Effectiveness of Ad Hoc Units: A Revised Training Model

DTIC Science & Technology

2009-06-01

thank Dr. Kalev “Gunner” Sepp, Dr. Bob McNab, Dr. John Arquilla, Dr. Nancy Roberts, Dr. Susan Hocevar, and Dr. Dorothy Denning for providing their...also want to thank Colonel Paul Warren, Information Operations Branch Chief at U.S. Central Command – Special Operations (SOCCENT), for sponsoring my...Academy of Management Journal, 38 (1), 60-84. Paul M. Nemiroff, Paul M., William, A. Pasmore and David L. Ford, Jr., “The Effects of Two

Prevalence, risk factors and burden of diabetic retinopathy in China: a systematic review and meta-analysis.

PubMed

Song, Peige; Yu, Jinyue; Chan, Kit Yee; Theodoratou, Evropi; Rudan, Igor

2018-06-01

Diabetic retinopathy (DR), the primary retinal vascular complication of diabetes mellitus (DM), is a leading cause of vision impairment and blindness in working-age population globally. Despite mounting concerns about the emergence of DM as a major public health problem in the largest developing country, China, much remains to be understood about the epidemiology of DR. We aimed to investigate the prevalence of and risk factors for DR, and estimate the burden of DR in China in 2010. China National Knowledge Infrastructure (CNKI), Wanfang, Chinese Biomedicine Literature Database (CBM-SinoMed), PubMed, Embase and Medline were searched for studies that reported the prevalence of and risk factors for DR in Chinese population between 1990 and 2017. A random-effects meta-analysis model was adopted to pool the overall prevalence of DR. Variations in the prevalence of DR in different age groups, DM duration groups and settings were assessed by subgroup meta-analysis and meta-regression. Odds ratios (ORs) of major risk factors were pooled using random-effects meta-analysis. The number of people with DR in 2010 was estimated by multiplying the age-specific prevalence of DR in people with DM with the corresponding number of people with DM in China. Finally, the national number of people with DR was distributed into six geographic regions using a risk factor-based model. A total of 31 studies provided information on the prevalence of DR and 21 explored potential risk factors for DR. The pooled prevalence of any DR, nonproliferative DR (NPDR) and proliferative DR (PDR) was 1.14% (95% CI = 0.80-1.52), 0.90% (95% CI = 0.56-1.31) and 0.07% (95% CI = 0.02-0.14) in general population; In people with DM, the pooled prevalence rates were 18.45% (95% CI = 14.77-22.43), 15.06% (95% CI = 11.59-18.88) and 0.99% (95% CI = 0.40-1.80) for any DR, NPDR and PDR, respectively. The prevalence of any DR in DM patients peaked between 60 and 69 years of age, and increased steeply with the duration of DM. DM patients residing in rural China were at a higher risk to have DR than those in urban areas. In addition, insulin treatment, elevated FBG level and higher HbA1c concentration were confirmed to be associated with a higher prevalence of DR in people with DM, with meta-ORs of 1.99 (95% CI = 1.34-2.95), 1.33 (95% CI = 1.12-1.59) and 1.15 (95% CI = 1.09-1.20) respectively. In 2010, a total of 13.16 million (95% CI = 8.95-18.00) Chinese aged 45 years and above were living with DR, among whom the most were in South Central China and the least were in Northwest China. DR has become a serious public health problem in China. Optimal screening of and interventions on DR should be implemented. Improved epidemiological studies on DR are still required.

Systems 2020

DTIC Science & Technology

2012-03-22

USC Team Members: SERC Research Council Dr. Abhi Deshmukh , Purdue Dr. Michael Griffin. U. Alabama-Huntsville Dr. Barry Horowitz, U. Virginia Dr...Areas ................................................. 34 3.2.1 Affordability, Agility, and Resilience (Barry Boehm and Abhi Deshmukh , Leads...statement was reinterpreted to involve the SERC Research Council (Drs. Deshmukh , Griffin, Horowitz, Rouse, and Wade, with Dr. Boehm as chair) in defining

A Solvable Self-Similar Model of the Sausage Instability in a Resistive Z-Pinch

DTIC Science & Technology

1989-09-20

Ithaca, NY 14853 Dr. V. Nardi Dr. John C. Riordan Stevens Institute of Technology Physics International Co. Hoboken, NJ 07803 2700 Merced Street Dr...92122 Dr. Rick B. Spielman Dr. Frank C. Young Sandia National Laboratories Naval Research Laboratory P.O. Box 5800 Code 4770.1 Albuquerque, NM 87115

[Pedro Laín Entralgo, physician and humanist].

PubMed

Goic, Alejandro

2002-01-01

This speech of the president of the Chilean Academy of Medicine, Dr Alejandro Goic, is a tribute to the memory of the Spanish physician, scholar, historian, writer and intellectual Dr. Pedro Laín Entralgo, who died in Madrid on June 4, 2001, at the age of 93. On that occasion, the Spanish newspaper "El Pais" defined him as the last humanist. The Spanish civil war started when Laín was 28 years old and he aligned with Franco's supporters. In 1940, when he founded the magazine "El Escorial", he was separated from the official party. He and other intellectuals declared themselves in an "interior exile". His autobiographical book, "Lightening the burden on the conscience" refers to his painful personal history. He obtained the History of Medicine chair, at the Complutense University, at the age of 34 and remained at that post until his retirement in 1978. His intellectual production is magnificent and calls to a mutual understanding, hope, friendship and love. Outstanding, among others, are his books "The wait and hope", "Theory and reality of the other", "Spain as a problem", "Medicine and history", "The clinical history", "Patient physician relationship", "Medical anthropology". He directed the collective work composed of seven volumes, called "Universal History of Medicine". He was a member of the Royal Academies for Language, History and Medicine. In Chile, he was named honorary member of the Faculty of Medicine of the University of Chile and of the Academies of Language, History and Medicine. He dictated a course of Medical Anthropology that had a profound impact on the thought of Chilean physicians. In 1949 he wrote that Chile was the most solid state of Latin America and that "Chile needs to leave his traditional calm, through a historical gesture, and create the river beds required by his magnificent spiritual and geographical gifts. There is a lack of a beautiful craziness". It was an invocation for an understanding with our neighboring countries "for ever and ever".

Confirmation by LC-MS of drugs in oral fluid obtained from roadside testing.

PubMed

Concheiro, Marta; de Castro, Ana; Quintela, Oscar; Cruz, Angelines; López-Rivadulla, Manuel

2007-08-06

The aim of this study was to assess the effectiveness of two current on-site oral fluid (OF) drug detection devices (OraLab and Dräger), as part of the Spanish participation in the Roadside Testing Assessment Project (ROSITA Project). The study was done in collaboration with the Spanish Traffic Police, in Galicia (NW Spain), during 2004 and 2005. A total of 468 drivers selected at the police controls agreed to participate through informed consent. In addition, saliva samples were collected and sent to the laboratory to confirm the on-site results. For this purpose, two different analytical liquid chromatography-mass spectrometry (LC-MS) methods were used to detect 11 drugs or metabolites in a 300 microL sample. Simultaneous analysis of morphine, 6-acetylmorphine, amphetamine, methamphetamine, MDA, MDMA, MDEA, MBDB, cocaine and benzoylecgonine was carried out using 100 microL of oral fluid, after an automated solid phase extraction. A different LC-MS method was performed to detect Delta(9)-THC in 200 microL of oral fluid using liquid-liquid extraction with hexane at pH 6. Both methods were fully validated, including linearity (1-250 ng/mL, 2-250 ng/mL) recovery (>50%), within-day and between-day precision (CV<15%), accuracy (mean relative error<15%), limit of detection (0.5 and 1 ng/mL), quantitation (1 and 2 ng/mL) and matrix effect. All of the positive cases and a random selection of 30% of the negatives were analyzed for confirmation analysis. Good results (sensitivity, specificity, accuracy, positive predictive value and negative predictive value>90%) were obtained for cocaine and opiates by OraLab, and for cocaine by Dräger. However, the results for the other compounds could be improved for both detection devices. Differences in the ease of use and in the interpretation mode (visual or instrumental) were observed.