Esthetic Rehabilitation of Anterior Teeth with Laminates Composite Veneers

PubMed Central

Riva, Giancarlo

2014-01-01

No- or minimal-preparation veneers associated with enamel preservation offer predictable results in esthetic dentistry; indirect additive anterior composite restorations represent a quick, minimally invasive, inexpensive, and repairable option for a smile enhancement treatment plan. Current laboratory techniques associated with a strict clinical protocol satisfy patients' restorative and esthetic needs. The case report presented describes minimal invasive treatment of four upper incisors with laminate nanohybrid resin composite veneers. A step-by-step protocol is proposed for diagnostic evaluation, mock-up fabrication and trial, teeth preparation and impression, and adhesive cementation. The resolution of initial esthetic issues, patient satisfaction, and nice integration of indirect restorations confirmed the success of this anterior dentition rehabilitation. PMID:25013730

Biologic restoration of a traumatized maxillary central incisor in a toddler: a case report.

PubMed

John, Sheen Ann; Anandaraj, S; George, Sageena

2014-01-01

Trauma to the anterior teeth is relatively common in young children and teenagers. Traumatized anterior teeth require quick functional and aesthetic repair, and poses a challenge to the dental practitioner owing to the lack of co-operation ceded and the longer time invested. Reattachment of tooth fragment should be the first choice to restoring teeth when a usable fragment is available, since it gives a psychological and aesthetic advantage over the conventional technique. With the vast improvement in adhesive technology, reattachment is definitely a predictable treatment option for very young children. This paper describes the treatment of a 2½ year old female child who sustained crown-root fracture, extending subgingivally, in primary upper central incisor.

Distalization of maxillary arch and correction of Class II with mini-implants: A report of two cases

PubMed Central

Tekale, Pawankumar Dnyandeo; Vakil, Ketan K.; Vakil, Jeegar K.; Gore, Ketan A.

2015-01-01

This article reports the successful use of mini-screws in the maxilla to treat two patients of age 21-year and 17-year-old girls. Both the patients had a skeletal Class II malocclusion with protrusive maxillary teeth and angels Class II mal-occlusion. Temporary anchorage devices (TADs) in the posterior dental region between maxillary second premolar and maxillary first molar teeth on both sides were used as anchorage for the retraction and intrusion of her maxillary anterior teeth. Those appliances, combined with a compensatory curved maxillary archwire, eliminated spacing, deep bite, forwardly placed and proclined upper front teeth and the protrusive profile, corrected the molar relationship from Class II to Class I. With no extra TADs in the anterior region for intrusion, the treatment was workable and simple. The patient received a satisfactory occlusion and an attractive smile. This technique requires minimal compliance and is particularly useful for correcting Class II patients with protrusive maxillary front teeth and dental deep bite. PMID:26097360

Unusual treatment of bimaxillary dentoalveolar protrusion via miniscrews and molar extraction

PubMed Central

Al-Fraidi, Ahmad; Afify, Ahmed R.

2012-01-01

This case report describes the treatment of a Saudi female patient, aged 13 years 8 months at the start of treatment, with a Class I bimaxillary dentoalveolar protrusion and extracted maxillary first molars. Miniscrews were placed bilaterally in the interdental space between both the upper and the lower posterior teeth. The treatment plan consisted of extraction of both lower first permanent molars, distalization of upper and lower premolars using miniscrews followed by en masse retraction of the upper and lower six anterior teeth. The active treatment period was 2 years 8 months. Arch retention was done using upper wrap-around retainer and lower fixed 3-3 retainer. The use of miniscrews helped to resolve the bimaxillary protrusion regardless of extraction pattern used. PMID:24987626

[Pre-surgical orthodontic treatment of skeletal class II patients with gingival smile corrected by anterior maxillary segmental osteotomy].

PubMed

Li, Xiaobing; Xiao, Liwei; Chen, Song; Chen, Yangxi

2002-11-01

To discuss the pre-surgical orthodontic treatment of skeletal class II patients with gingiva smile corrected by AMSO. We analyzed the clinical features of 20 skeletal class II patients treated by AMSO combined with Orthodontic treatment and evaluated the effects of AMSO by means of cephalometric analysis. After the AMSO treatment, ANB angle, the height of anterior maxilla, the protrusion of the upper anterior teeth, and the of A point had reduced significantly (P < 0.05). After AMSO, the appearance of patients had been improved markedly. AMSO can correct the protrusion of the maxilla and gingival smie efficiently. The anchorage of molars should be controlled carefully. The anterior part of the upper arch should be expended orthodontically to make arch relationship. Extract the upper bicuspid half a year before the surgery was recommended. When necessary, genioplasty could be performed.

Effects of combining ozone and hydrogren peroxide on tooth bleaching: A clinical study.

PubMed

Al-Omiri, Mahmoud K; Hassan, Ra'ed S Abul; AlZarea, Bader K; Lynch, Edward

2016-10-01

The purpose of this study was to evaluate the efficiency of bleaching after combining ozone and 38% H2O2 in comparison to the sole use of 38% H2O2. Consecutive 26 participants (13 males and 13 females) were recruited into this study. They were randomly allocated into 2 groups (n=13 for each group). In group 1 (test group); the participants' upper anterior teeth were treated with 38% H2O2 for 20min then the teeth were exposed to ozone for 60s (healOzone(®) X4, KaVo Dental, Biberach, Germany). In group 2 (controls); the upper anterior teeth were treated with 20min of 38% H2O2 only. The shade of teeth was evaluated by recording the L* a* b* values and Vita Classic shades at study baseline and after bleaching in both groups. The statistically significant changes were set at P≤0.05. Tooth sensitivity and teeth shades were comparable between groups at study baseline (p>0.05). Controls reported more tooth sensitivity following bleaching (p<0.001). Teeth achieved better Vita shades, higher L* values (lighter shades), and lower a* and b* values (lighter shades) after bleaching in both groups (P≤0.05). However, teeth bleached with H2O2 and ozone achieved better Vita shades, higher L* values and lower a* values (lighter shades) than those bleached with H2O2 alone (p<0.001). Changes in b* values were not significantly different between groups. Bleaching with 38% H2O2 for 20min followed by 60s of ozone application would result in teeth with lighter shades than bleaching with 38% H2O2 alone. Copyright © 2016 Elsevier Ltd. All rights reserved.

Modified protrusion arch for anterior crossbite correction - a case report.

PubMed

Roy, Abhishek Singha; Singh, Gulshan Kr; Tandon, Pradeep; Chaudhary, Ramsukh

2013-01-01

Borderline and mild skeletal Class III relationships in adult patients are usually treated by orthodontic camouflage. Reasonably rood results have been achieved with nonsurgical teatment of anterior crossbite. Class III malocclusion may be associated with mandibular prognathism, maxillary retrognathism, or both. Class III maxillary retrognathism generally involves anterior crossbite, which must be opened if upper labial brackets are to be bonded. If multiple teeth are in crossbite, after opening the bite usual step is to ligate forward or advancement arch made of 0.018" or 0.020" stainless steel or NiTi wire main arch that must be kept separated 2 mm from the slot ofupper incisor braces. Two stops or omegas are made 1 mm mesial to the tubes of the molar bands that will impede main arch from slipping,and in this manner the arch will push the anterior teeth forward Here we have fabricated a modified multiple loop protrusion arch to correct an anterior crossbite with severe crowding that was not amenable to correct by advancement arches.

Apical root resorption during orthodontic treatment. A prospective study using cone beam CT.

PubMed

Lund, Henrik; Gröndahl, Kerstin; Hansen, Ken; Gröndahl, Hans-Göran

2012-05-01

To investigate the incidence and severity of root resorption during orthodontic treatment by means of cone beam computed tomography (CBCT) and to explore factors affecting orthodontically induced inflammatory root resorption (OIIRR). CBCT examinations were performed on 152 patients with Class I malocclusion. All roots from incisors to first molars were assessed on two or three occasions. At treatment end, 94% of patients had ≥1 root with shortening >1 mm, and 6.6% had ≥1 tooth where it exceeded 4 mm. Among teeth, 56.3% of upper lateral incisors had root shortening >1 mm. Of upper incisors and the palatal root of upper premolars, 2.6% showed root shortenings >4 mm. Slanted surface resorptions of buccal and palatal surfaces were found in 15.1% of upper central and 11.5% of lateral incisors. Monthly root shortening was greater after 6-month control than before. Upper jaw teeth and anterior teeth were significantly associated with the degree of root shortening. Gender, root length at baseline, and treatment duration were not. Practically all patients and up to 91% of all teeth showed some degree of root shortening, but few patients and teeth had root shortenings >4 mm. Slanted root resorption was found on root surfaces that could be evaluated only by a tomographic technique. A CBCT technique can provide more valid and accurate information about root resorption.

Comparison of onset anesthesia time and injection discomfort of 4% articaine and 2% mepivacaine during teeth extractions

PubMed Central

Gazal, Giath; Alharbi, Rashdan; Fareed, Wamiq Musheer; Omar, Esam; Alolayan, Albraa Badr; Al-Zoubi, Hassan; Alnazzawi, Ahmad A.

2017-01-01

Objective: To investigate the speed of action and injection discomfort of 4% articaine and 2% mepivacaine for upper teeth extractions. Materials and Methods: Forty-five patients were included in the articaine 4% group, and 45 in the mepivacaine 2% control group. After all injections, soft and hard tissue numbness was objectively gauged by dental probe at intervals of 15 s. Furthermore, the discomfort of the injections were recorded by the patients after each treatment on standard 100 mm visual analog scales, tagged at the endpoints with “no pain” (0 mm) and “unbearable pain” (100 mm). Results: There were significant differences in the meantime of first numbness to associated palatal mucosa and tooth of patients between mepivacaine and articaine buccal infiltration (BI) groups P = 0.01 and 0.01. Patients in the articaine group recorded earlier palatal mucosa and teeth numbness than those in the mepivacaine group. With regards to the discomfort of the needle injections, palatal injection was significantly more painful than BI (t-test: P < 0.001). Articaine buccal injection was significantly more painful than mepivacaine buccal injection (t-test: P <0.001). However, articaine palatal injection was less painful than articaine BI. Clinically, anesthesia onset time was faster in anterior upper teeth than upper middle and posterior teeth. Conclusions: BIs with 4% articaine was faster in achieving palate and teeth anesthesia than 2% mepivacaine for extraction of upper maxillary teeth. Patients in mepivacaine BI and articaine palatal injection groups reported less pain with needle injection. Failure of anesthesia was noticeable with maxillary multiple-rooted teeth. PMID:28442952

An harmonic smile resulted from the use of ceramic prosthesis with zirconia structure: a case report.

PubMed

Tavarez, Rudys Rodolfo de Jesus; Goncalves, Leticia Machado; Dias, Ana Paula; Dias, Anna Claudia Pereira; Malheiros, Adriana Santos; Silva, Alice Carvalho; Bandeca, Matheus Coelho

2014-06-01

The rehabilitation of patients requiring an esthetic smile demands a multidisciplinary approach. This clinical report describes a treatment plan for recovery aesthetics' smile of anterior teeth using ceramic prosthesis with zirconia structure. Initially, a review of aesthetic parameters, diagnostic waxing, mock-up and provisional restorations was performed. A contextual assessment of aesthetic, proportion and shape of teeth was done to recreate a natural looking for teeth in consonance with the smile line. Subsequently, based on these parameters, fixed prostheses of the upper anterior teeth using ceramic restorations with zirconia infrastructures were performed. The use of ceramic restorations with zirconia structures associated with a careful treatment plan allows the professional to integrate esthetic and function for satisfactory clinical results. How to cite the article: Tavarez RR, Gonçalves LM, Dias AP, Dias AC, Malheiros AS, Silva AC, Bandeca MC. An harmonic smile resulted from the use of ceramic prosthesis with zirconia structure: A case report. J Int Oral Health 2014;6(3):90-2.

[Simultaneous intrusion and retraction of the anterior teeth using a three-piece base arch].

PubMed

Liu, D; Bai, D; Wang, C; Sun, W; Guo, J; Xi, R

2000-06-01

To evaluate the effects of the three-piece base arch on overbite correction of Class II malocclusion. 20 patients with high angle, flared incisors were treated using a three-piece base arch appliance. The intrusion force of four upper incisors was adjusted to approximately 50 g. The line of force action was 2 mm distally to the resistant center(RC) and the retraction force was 20 g, the right and left posterior segments were joined by a palatal bar. Cephalograms were taken before treatment (T1) and six months after treatment (T2). The upper molars moved mesially 0.60 +/- 0.35 mm and the distance of the vertical extrusion was 0.80 +/- 0.52 mm. The distances of the upper central incisor retraction and intrusion were -4.20 +/- 2.12 mm and 3.10 +/- 0.54 mm respectively. The RC of the central incisor retracted -4.12 +/- 1.96 mm and intruded 3.20 +/- 0.66 mm. The axial inclination of the upper incisor-palatal plane changed from 123.21 degrees +/- 4.26 degrees to 116.00 degrees +/- 3.96 degrees. The three-piece segmented approach can effectively intrude and retract the upper anterior teeth for flared incisors and deep overbite.

Quantification of intrusive/retraction force and moment generated during en-masse retraction of maxillary anterior teeth using mini-implants: A conceptual approach.

PubMed

Felicita, A Sumathi

2017-01-01

The aim of the present study was to clarify the biomechanics of en-masse retraction of the upper anterior teeth and attempt to quantify the different forces and moments generated using mini-implants and to calculate the amount of applied force optimal for en-masse intrusion and retraction using mini-implants. The optimum force required for en-masse intrusion and retraction can be calculated by using simple mathematical formulae. Depending on the position of the mini-implant and the relationship of the attachment to the center of resistance of the anterior segment, different clinical outcomes are encountered. Using certain mathematical formulae, accurate measurements of the magnitude of force and moment generated on the teeth can be calculated for each clinical outcome. Optimum force for en-masse intrusion and retraction of maxillary anterior teeth is 212 grams per side. Force applied at an angle of 5o to 16o from the occlusal plane produce intrusive and retraction force components that are within the physiologic limit. Different clinical outcomes are encountered depending on the position of the mini-implant and the length of the attachment. It is possible to calculate the forces and moments generated for any given magnitude of applied force. The orthodontist can apply the basic biomechanical principles mentioned in this study to calculate the forces and moments for different hypothetical clinical scenarios.

[Class III surgical patients facilitated by accelerated osteogenic orthodontic treatment].

PubMed

Wu, Jia-qi; Xu, Li; Liang, Cheng; Zou, Wei; Bai, Yun-yang; Jiang, Jiu-hui

2013-10-01

To evaluate the treatment time and the anterior and posterior teeth movement pattern as closing extraction space for the Class III surgical patients facilitated by accelerated osteogenic orthodontic treatment. There were 10 skeletal Class III patients in accelerated osteogenic orthodontic group (AOO) and 10 patients in control group. Upper first premolars were extracted in all patients. After leveling and alignment (T2), corticotomy was performed in the area of maxillary anterior teeth to accelerate space closing.Study models of upper dentition were taken before orthodontic treatment (T1) and after space closing (T3). All the casts were laser scanned, and the distances of the movement of incisors and molars were digitally measured. The distances of tooth movement in two groups were recorded and analyzed. The alignment time between two groups was not statistically significant. The treatment time in AOO group from T2 to T3 was less than that in the control group (less than 9.1 ± 4.1 months). The treatment time in AOO group from T1 to T3 was less than that in the control group (less than 6.3 ± 4.8 months), and the differences were significant (P < 0.01). Average distances of upper incisor movement (D1) in AOO group and control group were (2.89 ± 1.48) and (3.10 ± 0.95) mm, respectively. Average distances of upper first molar movement (D2) in AOO group and control group were (2.17 ± 1.13) and (2.45 ± 1.04) mm, respectively.No statistically significant difference was found between the two groups (P > 0.05). Accelerated osteogenic orthodontic treatment could accelerate space closing in Class III surgical patients and shorten preoperative orthodontic time. There were no influence on the movement pattern of anterior and posterior teeth during pre-surgical orthodontic treatment.

[All-ceramic resin bonded fixed partial denture made of IPS hot-pressed casting porcelain restore anterior missing teeth: a three years clinical observation].

PubMed

Zhou, Tuan feng; Wang, Xin zhi; Zhang, Gui rong

2011-02-18

To clinic observation of IPS Empress2 and IPS e.max all ceramic resin bonded fixed partial dentures used in one anterior teeth lost in upper jaw or less than two anterior tooth lost in lower jaw. 22 patients, 26 restorations had been made, which included 16 single-retainer all ceramic resin bonded fixed partial dentures and 10 two-retainers all ceramic resin bonded fixed partial dentures. Secondary caries of the abutments, shade in the margin of the retainers and the integrity of the restorations had been observed at 3 months, 6 months, 1 year, 2 years and 3 years after all ceramic resin bonded fixed partial dentures having been bonded. In the 3 years of clinic observation of the anterior all ceramic resin bonded fixed partial dentures, 1 two-retainers restoration lost bond after it had been made for 3 months, a retainer of one two-retainers restoration was broken after 6 months, but they are still used after modified as one-retainer all ceramic resin bonded fixed partial dentures, 1 two-retainers restoration lost bond two year later, It was integrity and re-bonded again that was still stable. No secondary carries and no shade in margin of the retainers had been found. Their color matches with the nature teeth excellently. The success rate was 88.5%. IPS Empress 2 and IPS e.max all ceramic resin bonded fixed partial dentures should be a good selection in one or two teeth lose in anterior jaws.

Effect of retraction of anterior teeth on pharyngeal airway and hyoid bone position in Class I bimaxillary dentoalveolar protrusion.

PubMed

Bhatia, S; Jayan, B; Chopra, S S

2016-12-01

To test the hypothesis that the retraction of anterior teeth has no effect on the dimensions of pharyngeal airway and to evaluate the retraction of anterior teeth on each parameter of pharyngeal airway. Twenty-two adult patients of Class I bimaxillary protrusion requiring first premolar extractions with maximum anchorage requirements were selected. The pharyngeal airway and dentofacial parameters of the patients were compared using pre- and post-treatment lateral cephalograms with the help of Student's paired t -test ( P  < 0.05). The relationship between airway size and dentofacial parameters was also evaluated using Pearson correlation coefficient. The upper and lower lips were retracted by 2.25 and 5.4 mm after retraction of the incisors. The tips of upper and lower incisors were retracted by 7.75 and 7.15 mm, respectively. There was a statistically significant decrease in SPP-SPPW ( P  < 0.05), U-MPW ( P  < 0.001), TB-TPPW ( P  < 0.001), and change in HRGN ( P  < 0.01). A significant correlation was observed between the amount of retraction of lower incisor and decrease in the pharyngeal airway posterior to soft palate ( r  = 0.102), tongue ( r  = 0.322), and change in HRGN ( r  = 0.265). The size of the pharyngeal (velopharyngeal and glossopharyngeal) airway reduced and hyoid bone position changed after retraction of the incisors in extraction space in bimaxillary protrusive adult patients.

Patient's Perception on the Esthetic Outcome of Anterior Fixed Prosthetic Treatment.

PubMed

Alshiddi, Ibraheem F; BinSaleh, Saad M; Alhawas, Yasser

2015-11-01

Patient's perception to the esthetic result of the treatment received can be different from a dentist opinion. Understanding patient's opinion, demand and expectation is part of successful treatment procedure. The purpose of this study was to investigate patient's opinion about the esthetic result of the fixed prosthetic treatment received in upper anterior teeth. About 90 volunteer subjects, 58 males and 32 females were given a self-evaluation questionnaire with 11 questions to respond as Yes or No. The questions regarded the esthetic result of a fixed prosthodontic treatment received for their upper anterior teeth. The same questioner was completed for each subject by three clinicians through clinical photographs for different views of subject's smile. Agreement between patients and clinicians was calculated for all subjects to evaluate patient's perception to their esthetic results. An agreement of 47.8 to 72.2% was observed between patients and clinicians, and the average agreement was 53.64 to 60%. The highest agreement was related to satisfaction with the color of the crown and/or bridge margin while the least agreement was related to the satisfaction with the natural looking of the restoration. There was variability in the agreement between the patients and the dentists with the satisfaction of the esthetic result of anterior restoration. Factor, such as gender, age and educational level may affect the results of the agreement.

Morphologic evaluation of dentoalveolar structures of mandibular anterior teeth during augmented corticotomy-assisted decompensation.

PubMed

Ahn, Hyo-Won; Seo, Dong-Hwi; Kim, Seong-Hun; Park, Young-Guk; Chung, Kyu-Rhim; Nelson, Gerald

2016-10-01

Our aim in this study was to evaluate the effect of augmented corticotomy on the decompensation pattern of mandibular anterior teeth, alveolar bone, and surrounding periodontal tissues during presurgical orthodontic treatment. Thirty skeletal Class III adult patients were divided into 2 groups according to the application of augmented corticotomy labial to the anterior mandibular roots: experimental group (with augmented corticotomy, n = 15) and control group (without augmented corticotomy, n = 15). Lateral cephalograms and cone-beam computed tomography images were taken before orthodontic treatment and before surgery. The measurements included the inclination and position of the mandibular incisors, labial alveolar bone area, vertical alveolar bone height, root length, and alveolar bone thickness at 3 levels surrounding the mandibular central incisors, lateral incisors, and canines. The mandibular incisors were significantly proclined in both groups (P <0.001); however, the labial movement of the incisor tip was greater in the experimental group (P <0.05). Significant vertical alveolar bone loss was observed only in the control group (P <0.001). The middle and lower alveolar thicknesses and labial alveolar bone area increased in the experimental group. In the control group, the upper and middle alveolar thicknesses and labial alveolar bone area decreased significantly. There were no significant differences in dentoalveolar changes between the 3 kinds of anterior teeth in each group, except for root length in the experimental group (P <0.05). Augmented corticotomy provided a favorable decompensation pattern of the mandibular incisors, preserving the periodontal structures surrounding the mandibular anterior teeth for skeletal Class III patients. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

[Combined orthodontic-orthoganthic surgery to treat asymmetric mandibular excess malocclusions].

PubMed

Li, Xiao-Bing; Chen, Song; Chen, Yang-Xi; Li, Jun

2005-06-01

To discuss the skeletal and dentoalveolar characteristics of asymmetric mandibular excess malocclusions and to discuss the procedures of combined orthodontic-orthonganthic surgery treatments of asymmetric mandibular excess malocclusions. 25 cases treated by combined orthodontic-orthognathic surgery treatments were reviewed to find out the specialties of this kind of therapy. The asymmetric of mandible presents anterior and posterior teeth tipped both sagitally and horizontally, as well as upper and lower jaws incompatibility. The pre-surgical orthodontic treatments included decomposition of anterior and posterior teeth, leveling and aligning the teeth etc. The post-surgical orthodontic treatments were to detail the occlusions. The patients all got functional and aesthetic good results after the combined orthodontic-orthognathic surgery treatments. The asymmetric mandibular excess affects the harmony of the face badly, and the correction of it must be carried out by the combined orthodontic-orthognathic surgery treatments. The pre- and post-surgical orthodontic treatments are the key stages to make the skeletal corrections stable.

Orthodontic treatment of a patient with unerupted maxillary central and lateral incisors and canine: a case report.

PubMed

Sabuncuoğlu, Fidan Alakuş; Olmez, Hüseyin

2012-05-01

The aim of this case report was to describe the orthodontic and periodontal management of a patient with three impacted anterior teeth. An 18-year-old female with Class I crowding on a Class I skeletal base presented with the chief complaint of an unaesthetic smile. Clinical examination revealed an impacted upper right permanent canine (13), lateral (12) and central incisor (11), a retained deciduous incisor and moderate crowding in the lower arch. The impacted teeth were surgically exposed (closed exposure) and aligned with fixed appliances. The 12 was extracted due to root resorption and 44 extracted to resolve the lower arch crowding. A fraenectomy and gingival recontouring were required. Orthodontic treatment resulted in improved overjet, overbite and an acceptable facial profile. The patient reported improved self esteem. While impacted anterior teeth are a clinical challenge, their surgical exposure, in combination with fixed appliances, is a conservative treatment plan which is not without complications.

A combined periodontal - prosthetic treatment approach to manage unusual gingival visibility in resting lip position and inversely inclined upper anterior teeth: a case report with discussion.

PubMed

Biniraj, K R; Janardhanan, Mahija; Sunil, M M; Sagir, Mohammed; Hariprasad, A; Paul, Tony P; Emmatty, Rishi

2015-03-01

Excessive gingival visibility during smile is a common esthetic complaint in dentistry, but excessive gingival visibility in resting lip position is relatively uncommon condition. Several exclusive radical to conservative surgical treatment or its combination with orthodontic therapy to treat this condition are within the reach of every patient nowadays. A case report of an excessive gingival visibility because of altered passive eruption along with inversely inclined maxillary anterior teeth is presented here. A relatively simple treatment approach combining periodontal and restorative therapy is used here to achieve the desirable aesthetic results. The gingival exposure resulting from altered passive eruption was completely managed by a gingivectomy, but the inclined appearance of teeth was still an aesthetic complaint. After complete healing of gingivectomy surgery, appropriately designed crowns were given to rectify the inversely inclined appearance. A complete rehabilitation of patient's smile could be achieved, the case was followed up for 3 years and the condition was found satisfactory.

Slow Orthodontic Teeth Extrusion to Enhance Hard and Soft Periodontal Tissue Quality before Implant Positioning in Aesthetic Area

PubMed Central

Maiorana, C; Speroni, S; Herford, A S; Cicciù, M

2012-01-01

Approaching bone defects of jaws treatments, hard and soft tissue augmentation could be considered as a goal for clinicians when performing dental implant placement. The increase in patients who want cosmetic treatment puts practitioners in an awkward position when choosing the best therapy to obtain the most desirable results. A private dentist referred a young patient to the Department of Implantology in Milan in order to place implants in the upper jaw. Radiographic evaluation of the two upper anterior incisors confirmed that the teeth had a poor prognosis The anterior ridge volume was clinically analyzed and several therapeutic choices were evaluated. Rapid extractions and immediate implant positioning were not considered due to the vertical and horizontal components of the bone defect. Therefore, the surgical team decided on increasing the bone volume by using slow orthodontic teeth extrusion technique. After 3 months of orthodontic treatment, the angular intra-bony defects of 1.1 tooth was completely healed. Implant guided positioning, associated with a small bone graft, showed optimal results at the time of healing screw placement. The soft tissue conditioning was obtained by a provisional acrylic crown. The final application of two integral ceramic crowns showed excellent aesthetic results. Radiographic investigation at a 24 month follow-up confirmed the integration of the dental implants and the recovery of the bone defects. Several safe surgical techniques are available today for reconstructing atrophic jaws. However, the same technique applied on the posterior area did not give the same predictable results as in the anterior areas of the jaw. PMID:23056158

The earliest herbivorous marine reptile and its remarkable jaw apparatus.

PubMed

Chun, Li; Rieppel, Olivier; Long, Cheng; Fraser, Nicholas C

2016-05-01

Newly discovered fossils of the Middle Triassic reptile Atopodentatus unicus call for a radical reassessment of its feeding behavior. The skull displays a pronounced hammerhead shape that was hitherto unknown. The long, straight anterior edges of both upper and lower jaws were lined with batteries of chisel-shaped teeth, whereas the remaining parts of the jaw rami supported densely packed needle-shaped teeth forming a mesh. The evidence indicates a novel feeding mechanism wherein the chisel-shaped teeth were used to scrape algae off the substrate, and the plant matter that was loosened was filtered from the water column through the more posteriorly positioned tooth mesh. This is the oldest record of herbivory within marine reptiles.

Orthodontic decompensation in class III patients by means of distalization of upper molars.

PubMed

Carlos, Villegas B; Giovanni, Oberti; Diego, Rey; Angela, Sierra; Baccetti, Tiziano

2009-01-01

Pre-surgical orthodontic treatments have the objective of establishing harmony between the dental arches by moving the teeth to ideal positions in relation to their bony bases, in order to achieve adequate antero-posterior occlusal and transverse relationships at the moment of surgery. Among the typical requirements in terms of dental compensations presented by Class III patients that require surgery, the inclination of anterior teeth must be changed in most cases by proclination of the lower incisors and retroclination of upper incisors. To achieve the inclination of the upper incisors, many different alternatives have been proposed, such as inter-proximal reduction, extractions, or distalization of upper molars, which has not been widely reported in the literature as a means to decompensate Class III malocclusion prior to surgery. This article describes the Bone Supported Pendulum (BSP) as an efficient therapeutic option to distalize molars through the use of an appliance stabilized to the palate by mini-implants, thus avoiding extractions and providing good interdigitation and coordination of the dental arches.

An overlay partial denture to restore worn mandibular anterior teeth.

PubMed

Samant, Asha; DeSciscio, Peter

2014-01-01

Restoring worn anterior mandibular teeth is a challenge, especially when teeth are small, esthetics are a concern, the long-term prognosis is questionable, and/or patient finances are an issue. This article describes an alternate treatment for a patient with a collapsed bite, missing posterior mandibular teeth, an ill-fitting complete maxillary denture with poor esthetics, and irregular, worn mandibular anterior teeth.

Two-Step Extraction of the Lower First Molar for Class III Treatment in Adult Patient.

PubMed

Almeida, Kélei Cristina de Mathias; Paulin, Ricardo Fabris; Raveli, Taísa Barnabé; Raveli, Dirceu Barnabé; Santos-Pinto, Ary

2016-01-01

The aim of this article is to describe a case report of Class III malocclusion treatment with lower first molar extraction. The 27-year-old Caucasian male patient presented a symmetric face with a straight profile, hyperdivergent growth pattern, molar and cuspid Class III relation, and an anterior crossbite as well as a mild crowding on cuspids area, in both upper and lower arches and a tendency to posterior crossbite. The treatment was performed by the use of Haas expansion appliance followed by an initial alignment and leveling of the upper and lower arches with a fixed edgewise appliance, extraction of lower teeth aiming the correction of the incisors proclination and end the treatment with a Class I molar relationship. It resulted in a significant change in the patient's profile, dentoalveolar Class III correction, upper arch expansion, leveling and alignment of the upper and lower arches, and improvement of tipping of the upper and lowers incisors. In cases of a dentoalveolar compensation in well positioned bone bases the treatment with fixed appliances is an alternative and extraction of lower teeth is considered.

Unpredictability of soft tissue changes after camouflage treatment of Class II division 1 malocclusion with maximum anterior retraction using miniscrews.

PubMed

Kim, Kayoung; Choi, Sung-Hwan; Choi, Eun-Hee; Choi, Yoon-Jeong; Hwang, Chung-Ju; Cha, Jung-Yul

2017-03-01

To compare soft and hard tissue responses based on the degree of maxillary incisor retraction using maximum anchorage in patients with Class II division 1 malocclusion. This retrospective study sample was divided into moderate retraction (<8.0 mm; n = 28) and maximum retraction (≥8.0 mm; n = 29) groups based on the amount of maxillary incisor retraction after extraction of the maxillary and mandibular first premolars for camouflage treatment. Pre- and posttreatment lateral cephalograms were analyzed. There were 2.3 mm and 3.0 mm of upper and lower lip retraction, respectively, in the moderate group; and 4.0 mm and 5.3 mm, respectively, in the maximum group. In the moderate group, the upper lip was most influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.94). The lower lip was most influenced by posterior movement of B-point (β = 0.84) and the cervical point of the mandibular incisor (β = 0.83). Prediction was difficult in the maximum group; no variable showed a significant influence on upper lip changes. The lower lip was highly influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.50), but this correlation was weak in the maximum group. Posterior movement of the cervical point of the anterior teeth is necessary for increased lip retraction. However, periodic evaluation of the lip profile is needed during maximum retraction of the anterior teeth because of limitations in predicting soft tissue responses.

Surgical management of impacted incisors in associate with supernumerary teeth: a combine case report of spontaneous eruption and orthodontic extrusion.

PubMed

Das, D; Misra, J

2012-01-01

Maxillary permanent incisors impaction is not a frequent case in dental practice, but its treatment is challenging because of its importance to facial esthetics. Supernumerary teeth are the main cause of impaction of upper incisors. Supernumerary teeth when present can cause both esthetic and pathologic problems. Early detection of such teeth is most important if complications are to be avoided. In this reported case, the orthopantamogram of a 9-year-old boy revealed two impacted supernumerary teeth in the maxillary anterior region, which was interfering with the eruption of the permanent central incisors. The impacted supernumerary teeth were surgically removed, 11 was repositioned in the arch as it was situated very high in the arch, close to the nasal floor. Twenty-one erupted spontaneously but orthodontic force was applied over 11 to bring it into the occlusion and alignment was achieved with 0.014 mm NiTi wire.

The earliest herbivorous marine reptile and its remarkable jaw apparatus

PubMed Central

Chun, Li; Rieppel, Olivier; Long, Cheng; Fraser, Nicholas C.

2016-01-01

Newly discovered fossils of the Middle Triassic reptile Atopodentatus unicus call for a radical reassessment of its feeding behavior. The skull displays a pronounced hammerhead shape that was hitherto unknown. The long, straight anterior edges of both upper and lower jaws were lined with batteries of chisel-shaped teeth, whereas the remaining parts of the jaw rami supported densely packed needle-shaped teeth forming a mesh. The evidence indicates a novel feeding mechanism wherein the chisel-shaped teeth were used to scrape algae off the substrate, and the plant matter that was loosened was filtered from the water column through the more posteriorly positioned tooth mesh. This is the oldest record of herbivory within marine reptiles. PMID:27386529

Non-masticatory uses of anterior teeth of Sima de los Huesos individuals (Sierra de Atapuerca, Spain).

PubMed

Lozano, Marina; Bermúdez de Castro, José M; Carbonell, Eudald; Arsuaga, Juan Luis

2008-10-01

In this study we examine the labial and occlusal surfaces of incisors and canines of hominins recovered from the Sima de los Huesos (SH), middle Pleistocene site, in order to establish the possible extra-masticatory use of anterior teeth. We have compared the microwear of these fossils with microwear from the anterior teeth of Australian Aborigines, a population characterized by ethnographic evidence of the use of their teeth as a third hand. These two samples of teeth were microscopically analyzed using Scanning Electron Microscopy (SEM). Our results support the "cultural" origin of microwear observed on fossil teeth: we conclude that the SH hominins used their anterior teeth as a "third hand" for para- or extra-masticatory activities.

A Combined Periodontal – Prosthetic Treatment Approach to Manage Unusual Gingival Visibility in Resting Lip Position and Inversely Inclined Upper Anterior Teeth: A Case Report with Discussion

PubMed Central

Biniraj, K R; Janardhanan, Mahija; Sunil, M M; Sagir, Mohammed; Hariprasad, A; Paul, Tony P; Emmatty, Rishi

2015-01-01

Excessive gingival visibility during smile is a common esthetic complaint in dentistry, but excessive gingival visibility in resting lip position is relatively uncommon condition. Several exclusive radical to conservative surgical treatment or its combination with orthodontic therapy to treat this condition are within the reach of every patient nowadays. A case report of an excessive gingival visibility because of altered passive eruption along with inversely inclined maxillary anterior teeth is presented here. A relatively simple treatment approach combining periodontal and restorative therapy is used here to achieve the desirable aesthetic results. The gingival exposure resulting from altered passive eruption was completely managed by a gingivectomy, but the inclined appearance of teeth was still an aesthetic complaint. After complete healing of gingivectomy surgery, appropriately designed crowns were given to rectify the inversely inclined appearance. A complete rehabilitation of patient’s smile could be achieved, the case was followed up for 3 years and the condition was found satisfactory. PMID:25878482

Interdisciplinary treatment of an adult with a unilateral cleft lip and palate

PubMed Central

Al-Ruwaithi, Moatazbellah M; Al-Fraidi, Ahmad A; Al-Tamimi, Tawfiq S; Al-Shehri, Ali S

2014-01-01

The management of cleft lip and palate (CLP) requires an interdisciplinary team providing comprehensive care. The present report presents an interdisciplinary approach for the care of a cleft patient. A 17-year-old male patient presented with a a chief complaint of “unpleasant appearance of my teeth” and a history of surgical repair of unilateral CLP on the left side. He presented with Class III molar relationships, Class II canine relationships, crossbite related to maxillary right first premolar and lateral incisor, severe maxillary and mandibular crowding, maxillary anterior tooth size deficiency, congenitally missing upper left lateral incisor. Patient was treated with a pre-adjusted edgewise appliance in conjunction with extraction of multiple teeth and distalization of the lower right first molar using a temporary anchorage device. In addition, alveolar bone graft and implant were placed to restore the missing upper left lateral incisor and a final esthetic work was performed for anterior teeth. The case was finished with Class I molar and canine relationships, minimal overjet and overbite. Total treatment time was about 31 months with satisfactory results. Post-treatment evaluation after 8 months showed stable results. PMID:24987659

Dental health state utility values associated with tooth loss in two contrasting cultures.

PubMed

Nassani, M Z; Locker, D; Elmesallati, A A; Devlin, H; Mohammadi, T M; Hajizamani, A; Kay, E J

2009-08-01

The study aimed to assess the value placed on oral health states by measuring the utility of mouths in which teeth had been lost and to explore variations in utility values within and between two contrasting cultures, UK and Iran. One hundred and fifty eight patients, 84 from UK and 74 from Iran, were recruited from clinics at University-based faculties of dentistry. All had experienced tooth loss and had restored or unrestored dental spaces. They were presented with 19 different scenarios of mouths with missing teeth. Fourteen involved the loss of one tooth and five involved shortened dental arches (SDAs) with varying numbers of missing posterior teeth. Each written description was accompanied by a verbal explanation and digital pictures of mouth models. Participants were asked to indicate on a standardized Visual Analogue Scale how they would value the health of their mouth if they had lost the tooth/teeth described and the resulting space was left unrestored. With a utility value of 0.0 representing the worst possible health state for a mouth and 1.0 representing the best, the mouth with the upper central incisor missing attracted the lowest utility value in both samples (UK = 0.16; Iran = 0.06), while the one with a missing upper second molar the highest utility values (0.42, 0.39 respectively). In both countries the utility value increased as the tooth in the scenario moved from the anterior towards the posterior aspect of the mouth. There were significant differences in utility values between UK and Iranian samples for four scenarios all involving the loss of anterior teeth. These differences remained after controlling for gender, age and the state of the dentition. With respect to the SDA scenarios, a mouth with a SDA with only the second molar teeth missing in all quadrants attracted the highest utility values, while a mouth with an extreme SDA with both missing molar and premolar teeth in all quadrants attracted the lowest utility values. The study provided further evidence of the validity of the scaling approach to utility measurement in mouths with missing teeth. Some cross-cultural variations in values were observed but these should be viewed with due caution because the magnitude of the differences was small.

Maxillary canine impactions related to impacted central incisors: two case reports.

PubMed

Bayram, Mehmet; Ozer, Mete; Sener, Ismail

2007-09-01

The purpose of this case report is to describe the combined surgical and orthodontic treatment of two cases with an impacted maxillary central incisor and canine in the same quadrant and to discuss the causal relationship between them. The most common causes of canine impactions are usually the result of one or more factors such as a long path of eruption, tooth size-arch length discrepancies, abnormal position of the tooth bud, prolonged retention or early loss of the deciduous canine, trauma, the presence of an alveolar cleft, ankylosis, cystic or neoplastic formation, dilaceration of the root, supernumerary teeth, and odontomas. Although impaction of the maxillary central incisor is almost as prevalent as impacted canines its etiology is different. The principal factors involved in causing the anomaly are supernumerary teeth, odontomas, and trauma. Case #1: A 10.5-year-old girl in the early mixed dentition stage presented with a chief complaint of the appearance of her anterior teeth. She had a Class I skeletal pattern and a history of trauma to the maxillary central incisors at age five with premature exfoliation. Radiographs revealed an impacted upper right central incisor in the region of the nasal floor, delayed eruption of the maxillary permanent central incisor, and the adjacent lateral incisor was inclined toward the edentulous space. Treatment was done in two stages consisting of surgical exposure and traction of the impacted central incisor and fixed orthodontic treatment. Case #2: An 11.5-year-old girl presented for orthodontic treatment with the chief complaint of an unerupted tooth and the appearance of her upper anterior teeth. She was in the late mixed dentition period with a Class III skeletal pattern along with an anterior cross-bite with some maxillary transverse deficiency. The maxillary right canine and central incisor were absent, but the maxillary right deciduous canine was still present. Treatment included arch expansion followed by surgical exposure and traction of the impacted teeth and fixed orthodontic treatment. This case report provides some evidence of a significant environmental influence of an impacted maxillary central incisor on the path of eruption of the ipsilateral maxillary canine. When an impacted maxillary central incisor exists, the maxillary lateral incisor's root might be positioned distally into the path of eruption of the maxillary canine preventing its normal eruption. Ongoing assessment and early intervention might help to prevent such adverse situations from occurring.

A retrospective evaluation of traumatic dental injury in children who applied to the dental hospital, Turkey.

PubMed

Sari, M E; Ozmen, B; Koyuturk, A E; Tokay, U; Kasap, P; Guler, D

2014-01-01

The purpose of this study was to analyze traumatic dental injuries in children visiting the dental hospital emergency department in Samsun of Turkey, in the period from 2007 to 2011. Data of age, gender, causes of dental trauma, injured teeth, type of dental injuries, the application period, the dental treatments, and traumatic dental injuries according to the seasons were obtained from the records at dental hospital. Of all 320 patients with traumatic dental injury, 205 were boys and 115 were girls with a boys/girls ratio 1.78:1. Traumatic dental injury was observed more frequently in the 7-12 age groups: 52.5% in girls and 67.8% in boys. Falls are the major cause of traumatic dental injury in the age group 6-12 (51.4%). Sport activities are a common cause of traumatic dental injury in the 7-12 age group (34.2%). Patients visited a dentist within approximately 2 h (57.1%). The upper anterior teeth were subjected to trauma more frequently than the lower anterior teeth. The maxillary central incisors were the most commonly affected teeth, and the mandibular canins were the least affected teeth. In primary teeth, avulsion was the most common type of dental injury (23%); on the other hand, enamel fractures were the most common type of dental injury (30.6%) observed in permanent teeth. In the primary dentition, the most commonly performed treatments were dental examination and prescribing (70%). The most common treatment choices in permanent teeth were restoration and dental examination (49.7 and 15.8%, respectively). The results of the study show that the emergency intervention to traumatized teeth is important for good prognosis of teeth and oral tissues. Therefore, the parents should be informed about dental trauma in schools, and dental hospital physicians should be subjected to postgraduate training.

Supernumerary Teeth in the Maxillary Anterior Region: The Dilemma of Early Versus Late Surgical Intervention.

PubMed

Sarne, Ofer; Shapira, Yehoshua; Blumer, Sigalit; Finkelstein, Tamar; Schonberger, Shirley; Bechor, Naomi; Shpack, Nir

Supernumerary teeth are the most common developmental dental anomalies in the maxillary anterior region causing interference to the developing permanent incisors resulting in poor dental and facial esthetics. Two different opinions regarding the timing for surgical removal of the supernumerary teeth are presented. In this case report, three brothers with supernumerary teeth in the maxillary anterior region are presented, their surgical and orthodontic management and outcome are discussed.

Rapid Palatal Expansion in the absence of posterior cross-bite to intercept maxillary incisor crowding in the mixed dentition: a CBCT evaluation of spontaneous changes of untouched permanent molars.

PubMed

Rosa, M; Lucchi, P; Manti, G; Caprioglio, A

2016-12-01

The aim of this study was to investigate the reaction of untouched permanent molars following RPE, anchored on deciduous teeth in the early mixed dentition, aimed to solve maxillary anterior crowding in the absence of posterior cross-bite. A prospective clinical trial comprised 35 consecutive patients (20 males and 15 females) treated by the same orthodontist (MR). All patients showed crowding of the upper permanent incisors in the early mixed dentition in the absence of posterior cross-bite. RPE was anchored on second deciduous molars and on the deciduous canines. CBCT was taken before and after the removal of the RPE appliance. The transverse linear changes in width and the variation in the torque of the permanent molars were measured in the coronal plane. Relief of incisor crowding was found in all patients. The transverse width between permanent molars increased significantly. The apices of the upper permanent molars spontaneously expanded more than the crowns, while the opposite happened on the lower permanent molars. Moreover, the untouched upper permanent molars spontaneously uprighted palatally, while the lower permanent molars spontaneously uprighted buccally. The variation in the torque of the permanent molars mirrored transverse normal growth. In the early mixed dentition and in the absence of posterior cross-bite, it is possible to expand transversally the palate while uprighting the upper permanent molars in the opposite direction. RPE anchored on the deciduous teeth in the early mixed dentition, in the absence of posterior cross-bite, provides an "anticipation of transverse growth" and could be indicated to expand the anterior portion of the maxillary arch perimeter to solve upper incisor crowding.

A new species of Cretalamna sensu stricto (Lamniformes, Otodontidae) from the Late Cretaceous (Santonian-Campanian) of Alabama, USA

PubMed Central

Ehret, Dana J.

2018-01-01

Decades of collecting from exposures of the Upper Cretaceous Tombigbee Sand Member of the Eutaw Formation and Mooreville Chalk in Alabama, USA has produced large numbers of isolated Cretalamna (sensu stricto) teeth. Many of these teeth had formerly been assigned to the extinct Late Cretaceous shark Cretalamna appendiculata (Agassiz, 1843), a taxon that is now considered largely restricted to the Turonian of Europe. Recent studies have shed light on the diversity of Late Cretaceous Cretalamna (s.s.) taxa, and here we recognize a new species from Alabama, Cretalamna bryanti. The teeth of C. bryanti sp. nov. appear aligned with the members of the Cretalamna borealis species group, but can be distinguished from these other species by a combination of the following: anterior teeth with a more pronounced and triangular lingual root protuberance, broader triangular cusp, and a taller root relative to the height of the crown; anteriorly situated lateroposterior teeth have a distally inclined or hooked main cusp and more than one pair of lateral cusplets; and lateroposterior teeth have a strong distally hooked main cusp and a root that is largely symmetrical in basal view. At present, C. bryanti sp. nov. is stratigraphically confined to the Santonian/Campanian Dicarinella asymetrica Sigal, 1952 and Globotruncanita elevata Brotzen, 1934 Planktonic Foraminiferal Zones within the Tombigbee Sand Member of the Eutaw Formation and Mooreville Chalk, and teeth have been collected from only four counties in central and western Alabama. The recognition of C. bryanti sp. nov. in Alabama adds to our knowledge on the diversity and distribution of Late Cretaceous otodontids in the region. PMID:29333348

[Three-dimensional analysis of the early correction of anterior crossbite using eruption guidance appliance].

PubMed

Wang, X; Zhang, J J; Yuan, F S; Wang, Y; Li, C H; Varrela, J E; Yue, J; Ge, L H

2018-06-18

To investigate the clinical effect of eruption guidance appliance in the treatment of anterior cross bite in mixed-dentition children. In the study,10 mixed-dentition children with anterior cross bite, totally 12 incisors, were selected. Alginate was used to take upper and lower dentition impression and make a hard plaster model,which served as the eruption guidance appliance for treatment. The pre- and post-operative dental casts were digitized with SmartOptics Activity 880 scanner,and the three-dimensional overlapping models were obtained by reverse engineering software,Geomagic Studio 2012,then the three-dimensional movements of the upper and lower incisors were analyzed using Imageware 13.2 software. The overbite and overjet were analyzed using the same methods. Measurement with copper wire was used to analyze the upper and lower arch length. Space analysis was the result by the sum of crown width minus the arch length. The crown width of unerupted permanent teeth was according to X-ray method to predict. The SPSS 17.0 software was used to analyze the pre- and post-operative measurements of the same child. The normality test of the measured data showed that it conformed to the normal distribution. Therefore,the t test and double side test were used,and the significance level was 0.05. The course of treatment was (5.6±2.7) months. During orthodontic treatment, the upper incisors moved mainly labially (P<0.001) in three-dimensional displacement, and the lower incisors moved mainly the same direction (P=0.025). During the treatment of eruption guidance appliance,the average overbite decreased (1.01±0.9) mm (t=-3.531, P=0.006), and the difference was statistically significant. There was no statistically significant difference between the pre- and post-operative average overjet (t=0.771, P=0.460). The severity of crowding in upper arch decreased (1.9±0.99) mm (t=-6.042, P<0.001),and that in lower arch decreased (1.9±0.74) mm (t=-8.143, P<0.001), both of the differences were statistically significant. The anterior cross bite in mixed dentition could be corrected by eruption guidance appliance, and at the same time, the normal overjet and overbite were established, and the teeth were aligned.

Early Childhood Caries: A Review.

PubMed

Alazmah, Abdulfatah

2017-08-01

To review and update the current knowledge about early childhood caries (ECC) and its etiology, prevalence, risk factors, management, and preventive strategies. Early childhood caries is a disease affecting significantly both well-developed and industrial nations. The ECC can significantly affect the child's quality of life, as it may lead to infection, swelling, pain, and other symptoms. The ECC affects children after eruption of primary teeth until age of around 5 years. The ECC affects all parts of the tooth including the smooth surface. Upper anterior teeth and primary molars are usually affected. The lower anterior teeth are less likely affected. The risk factors for ECC are diet, bacteria, and host susceptibility. The additional factors, such as presence of enamel defect and the feeding practices also contribute to the initiation and progress of ECC. Dentists must focus on utilizing existing techniques to distinguish indications of right on time and propelled caries and give guidance on the best way to counteract and control caries in children. Approaches should be directed to preventive caries control strategies among children. Preventing and controlling the development of ECC among children is important to maintain effective eating, speech development, and formation of a positive self-image.

Is the smile line a valid parameter for esthetic evaluation? A systematic literature review.

PubMed

Passia, Nicole; Blatz, Markus; Strub, Jörg Rudolf

2011-01-01

The "smile line" is commonly used as a parameter to evaluate and categorize a person's smile. This systematic literature review assessed the existing evidence on the validity and universal applicability of this parameter. The latter was evaluated based on studies on smile perception by orthodontists, general clinicians, and laypeople. A review of the literature published between October 1973 and January 2010 was conducted with the electronic database Pubmed and the search terms "smile," "smile line," "smile arc," and "smile design." The search yielded 309 articles, of which nine studies were included based on the selection criteria. The selected studies typically correlate the smile line with the position of the upper lip during a smile while, on average, 75 to 100% of the maxillary anterior teeth are exposed. A virtual line that connects the incisal edges of the maxillary anterior teeth commonly follows the upper border of the lower lip. Average and parallel smile lines are most common, influenced by the age and gender of a person. Orthodontists, general clinicians, and laypeople have similar preferences and rate average smile lines as most attractive. The smile line is a valid tool to assess the esthetic appearance of a smile. It can be applied universally as clinicians and laypersons perceive and judge it similarly.

Self-perception and satisfaction with dental appearance and aesthetics with respect to patients’ age, gender, and level of education.

PubMed

Strajnić, Ljiljana; Bulatović, Dijana; Stančić, Ivica; Živković, Rade

2016-01-01

Patient’s subjective evaluation of dental appearance and aesthetics is becoming an increasingly important factor in aesthetic treatments and prosthetic therapy. The aim of this study was to investigate the influence of age, education level, gender, and different dental status and the appearance of the upper anterior teeth (color, size, shape, position and alignment of the anterior teeth) on the satisfaction of the respondents with dental appearance and aesthetics of their upper anterior teeth and their desire for improvement. The study encompassed 480 people aged 20 to 50 years with an average age of 30.84 years. There were 236 male and 244 female subjects. The respondents were interviewed using a questionnaire specially designed for the purpose of this research. For the study, the subjects were divided into the following three age groups: the younger age group (20–30 years of age), the middle age group (31–40 years of age), and the older age group (41–50 years of age). The conducted study did not reveal statistical significance with respect to gender in any of the examined parameters (p > 0.05). A little more than one half of the respondents in each age group were satisfied with their dental appearance and aesthetics (60.3% of the respondents in the age group of 20–30 years, 55.7% in the age group of 31–40, and 53.7% in the age group of 41–50 years of age). Satisfaction with dental appearance and aesthetics increases linearly with the increase in the level of education and was the highest among the respondents with university degree (33.3%). Female respondents were more dissatisfied with their dental appearance and aesthetics as compared with male respondents, but the difference was found to be non-significant. Patients with higher education level were more satisfied with their dental appearance and aesthetics than those with lower education.

Long-term stability of soft tissue changes in anterior open bite adults treated with zygomatic miniplate-anchored maxillary posterior intrusion.

PubMed

Marzouk, Eiman S; Kassem, Hassan E

2018-03-01

To evaluate soft tissue changes and their long-term stability in skeletal anterior open bite adults treated by maxillary posterior teeth intrusion using zygomatic miniplates and premolar extractions. Lateral cephalograms of 26 patients were taken at pretreatment (T1), posttreatment (T2), 1 year posttreatment (T3), and 4 years posttreatment (T4). At the end of treatment, the soft tissue facial height and profile convexity were reduced. The lips increased in length and thickness, with backward movement of the upper lip and forward movement of the lower lip. The total relapse rate ranged from 20.2% to 31.1%. At 4 years posttreatment, 68.9% to 79.8% of the soft tissue treatment effects were stable. The changes in the first year posttreatment accounted for approximately 70% of the total relapse. Soft tissue changes following maxillary posterior teeth intrusion with zygomatic miniplates and premolar extractions appear to be stable 4 years after treatment.

An analysis of maxillary anterior teeth: facial and dental proportions.

PubMed

Hasanreisoglu, Ufuk; Berksun, Semih; Aras, Kerem; Arslan, Ilker

2005-12-01

The size and form of the maxillary anterior teeth are important in achieving pleasing dental and facial esthetics. However, little scientific data have been defined as criteria for evaluating these morphological features. This study analyzed the clinical crown dimensions of maxillary anterior teeth to determine whether consistent relationships exist between tooth width and several facial measurements in a subset of the Turkish population. Full-face and anterior tooth images of 100 Turkish dental students viewed from the front and engaged in maximum smiling were recorded with digital photography under standardized conditions. Gypsum casts of the maxillary arches of the subjects were also made. The dimensions of the anterior teeth, the occurrence of the golden ratio, the difference between the actual and perceived sizes, and the relationship between the anterior teeth and several facial measurements by gender were analyzed using the information obtained from both the computer images and the casts. One-sample, 2-sample, and paired t tests, and repeated-measures analysis of variance and Duncan multiple-range tests were performed to analyze the data (alpha=.05). The dimensions of the central incisors (P<.05) and canines (P<.01) varied by gender. The existence of the so-called "golden proportion" for the maxillary anterior teeth as a whole was not found. Significant differences emerged when the mean ratios between various perceived widths were compared with their ideal golden ratios (P<.01). Proportional relationships between the bizygomatic width and the width of the central incisor, and the intercanine distance and the interalar width in women were observed. The maxillary central incisor and canine dimensions of men were greater than those of women in the Turkish population studied, with the canines showing the greatest gender variation. Neither a golden proportion nor any other recurrent proportion for all anterior teeth was determined. Bizygomatic width and interalar width may serve as references for establishing the ideal width of the maxillary anterior teeth, particularly in women.

Three-dimensional analysis using finite element method of anterior teeth inclination and center of resistance location.

PubMed

Geramy, Allahyar; Sodagar, Ahmad; Hassanpour, Mehdi

2014-01-01

To locate the centre of resistance of consolidated units of four and six anterior teeth during retraction. Twelve three-dimensional (3D) models were designed in SolidWorks of the anterior segment with four and six teeth and their supporting structure. A proper force system was applied in each model to retract the teeth bodily. The exact location of the centre of resistances (CRes) was determined. It was found that the path of CRes change in four-tooth and six-tooth units according to the anterior teeth torque. A posterior shift of the CRes by increasing the inclination of teeth was shown. However, vertical position has a fluctuant behaviour. First it moves apically, then it moves incisally. Furthermore, results suggest that in en masse retraction, translation can be achieved with a smaller amount of moment-to-force ratio than in four-incisor retraction. In other words, for bodily retraction of anterior incisor segments, we should apply force in a more apical position. Different anterior torques between 7 and 35 degrees, cannot affect the CRes position dramatically. The area of CRes shifting is 0.92 mm (anterioposteriorly) x 0.74 mm (superior-inferiorly) in the six-tooth unit in the teeth model and 0.85 mm (anterioposteriorly) x 0.82 mm (superior-inferiorly) in the teeth and bone model. In the four-tooth model, the area of CRes shifting is 0.97 mm (anterioposteriorly) x 0.93 mm (superior-inferiorly) in tooth model and 0.77 mm (anterioposteriorly) x 0.87 mm (superior-inferiorly) in the teeth and bone model.

Influence of shovel-shaped incisors on the dental arch crowding in Mongolian females.

PubMed

Hasegawa, Yuh; Terada, Kazuto; Kageyama, Ikuo; Tsukada, Shin-ichi; Uzuka, Satoshi; Nakahara, Rizako; Nakahara, Sen

2009-08-01

The aim of this study was to investigate the influences of shovel-shaped incisors on the dental arch crowding in the samples of modern young female adult Mongolians (belonging to the Khalkha-Mogol grouping) ranged between 18.5 and 25.0 years, with a mean age of 20.7 years. Materials in this study comprised of 33 dental casts. Plaster replicas of the A.S.U. system plaques were used to facilitate standardization in scoring and classify shoveling regarding both upper central and lateral incisors. Dimensions of the dental arch namely, overjet, overbite, arch depth, arch width and irregularity index were measured. The correlation between the shovel shape of the central incisor and the lateral incisor was highly significant. Significantly relations were found between the grades of shoveling and the mesiodistal diameters of upper first molars and lower incisors. Positive correlation was admitted between the shoveling and upper arch depth anterior, and upper arch depth. It may be considered that the grades of shoveling are indirectly related with upper and/or lower anterior crowding. Although crowding is looks like an expression of disharmony between teeth and alveolar arch, it may be caused by multiple etiologic factors interacted directly and/or indirectly.

Corticotomy-assisted orthodontic camouflage in a class III adult patient with a severe transverse discrepancy.

PubMed

Gracco, Antonio; Finotti, Marco; Bruno, Giovanni; de Stefani, Alberto

2018-04-06

A 25-year-old man presented with a maxillary transverse discrepancy, posterior cross bite, anterior open bite, molar and canine class III. Treatment included a corticotomy in the upper lateral and posterior teeth, a palatal expansor and a sectional archwire to assist the expansion. The following treatment phase included bonding with Incognito System lingual appliance, interproximal reduction to solve the crowding and bite blocks to control the verticality. Two months after the bonding intermaxillary class III elastics were used to solve the sagittal discrepancy and eight months after the bonding vertical elastics were used in order to solve the anterior open bite until the end of the treatment. A Boston splint was applied for the upper arch, an essix splint was applied for the lower arch. The patient compliance was an essential aspect in the success of the orthodontic treatment. Copyright © 2018. Published by Elsevier Masson SAS.

Comparison of maxillary anterior tooth width and facial dimensions of 3 ethnicities.

PubMed

Parciak, Ewa C; Dahiya, Ankur T; AlRumaih, Hamad S; Kattadiyil, Mathew T; Baba, Nadim Z; Goodacre, Charles J

2017-10-01

As the cosmetic demands of patients increase, determining the appropriate dimensions of the maxillary anterior teeth has become increasingly relevant. The relationship between facial measurements and tooth size provide guidance for maxillary anterior tooth size selection. However, most publications on this topic have focused on the white population, and more data for tooth sizes and their proportions in other ethnicities are needed. The purpose of this observational study was to investigate the relationship between the mesiodistal dimensions of the 6 maxillary anterior teeth and the bizygomatic width, interpupillary distance, intercanthal distance, interalar width, and intercommissural width of individuals of Asian, African-American, and white ethnicities. Standardized digital images of 360 participants (120 Asian, 120 African-American, and 120 white) were used to measure facial segments. Individual dimensions of the 6 maxillary anterior teeth were measured using stone casts with digital sliding caliper. The combined width of the 6 maxillary anterior teeth on a straight line corresponded to the sum of the anterior tooth width. The means and standard deviations from descriptive measurements were calculated and analyzed for face and maxillary anterior tooth ratios and correlations. Statistical analysis was done using the Kruskal-Wallis procedure to compare facial and tooth parameters among the 3 ethnicities. Appropriate post hoc comparisons that adjusted for multiple testing were conducted when warranted (α=.05). The Spearman rho correlation, a nonparametric correlate of the Pearson correlation, was used to associate the facial and tooth parameters within the strata of sex and ethnicity. No consistent ratios were found among the examined facial dimensions and the mesiodistal dimensions of the 6 maxillary anterior teeth among the 3 ethnicities, except for the central incisor width-to-bizygomatic width ratio. No correlations were found between the facial dimensions and mesiodistal dimensions of the 6 maxillary anterior teeth among the 3 ethnicities except in Asian women. For Asian women, the intercommissural width correlated with the width of the central incisor (P=.001), the width of 2 central incisors (P=.001), the width of 4 incisors (P=.003), and the width of 6 maxillary anterior teeth (P=.005). No facial proportions by which the exact width of maxillary anterior teeth could be predicted were found in Asian, African-American, or white populations. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Evaluation of maxillary anterior teeth and their relation to the golden proportion in Malaysian population.

PubMed

Al-Marzok, Maan Ibrahim; Majeed, Kais Raad Abdul; Ibrahim, Ibrahim Khalil

2013-01-24

The maxillary anterior teeth are important in achieving pleasing dental aesthetics. Various methods are used to measure the size and form of them, including the golden proportion between their perceived widths, and the width-to-height ratio, referred to as the golden standard. The purpose of this study was conducted to evaluate whether consistent relationships exist between tooth width and height of the clinical crown dimensions; and to investigate the occurrence of the golden proportion of the maxillary anterior teeth. Dental casts of the maxillary arches were made in this cross-sectional study from MAHSA University College students who met the inclusion criteria. The 49 participants represented the Malaysian population main ethnics. The dimensions of the anterior teeth and the perceived width of anterior teeth viewed from front were measured using a digital caliper. Comparison of the perceived width ratio of lateral to central incisor and canine to lateral incisor with the golden proportion of 0.618 revealed there were a significant statistical difference (p < 0.05). The statistical difference was significant for the width-to-height ratio of central incisors to the golden standard of 80%. There was no significant difference in the comparison among ethnic groups for the golden proportion and the golden standard. The golden proportion was not found to exist between the perceived widths of maxillary anterior teeth. No golden standard were detected for the width-to-height proportions of maxillary incisors. Specific population characteristics and perception of beauty must be considered. However, ethnicity has no association with the proportions of maxillary anterior teeth.

The effects of alveolar bone loss and miniscrew position on initial tooth displacement during intrusion of the maxillary anterior teeth: Finite element analysis

PubMed Central

Cho, Sun-Mi; Choi, Sung-Hwan; Sung, Sang-Jin; Yu, Hyung-Seog

2016-01-01

Objective The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss. PMID:27668194

[Three dimensional finite element analysis of maxillary anterior teeth retraction with micro-implant anchorage and sliding mechanics].

PubMed

Zhang, Yi; Zhang, Lei; Fan, Yu-bo; Song, Jin-lin; Deng, Feng

2009-10-01

To investigate the biomechanical effects of micro-implant anchorage technique with sliding mechanics on maxillary anterior teeth retraction under different implant insertion heights and different retraction hook heights. The three dimensional finite element model of maxillary anterior teeth retraction force system was constructed with CT scanning and MIMICS software and the relationships between brackets, teeth, wire and micro-implant were simulating the clinical factions. Then the initial tooth displacement was calculated when the insertion heights were 4 mm and 8 mm and the retraction hook heights were 1, 4, 7, 10 mm respectively. With retraction hook height added, the anterior teeth movement changed from lingual crown tipping to labial crown tipping and the intrusion movement was more apparent when the micro-implant was inserted in a higher location. The ideal teeth movement control could be achieved by different insertion heights of micro-implant and different retraction hook heights in straight wire retraction force system.

Esthetic Rehabilitation of Primary Anterior Teeth using Temporization Material: A Novel Approach

PubMed Central

Pandit, IK; Gupta, Monika; Nagpal, Jyoti

2017-01-01

Pediatric dentists should always aim for esthetic and functional rehabilitation of decayed/traumatized primary teeth. The most common method for restoring such teeth involves the use of “strip crowns” with composites, while the recent trend is toward using other extracoronal restorations including preve-neered stainless steel crowns and zirconia crowns. All these restorative options have shown good success rates, but also have some limitations. This case series depicts novel clinical technique of using a temporization material for full-coronal restoration(s) in primary anterior teeth. This included the chair-side custom fabrication of full-coronal restoration using temporization material, which has resulted in good immediate esthetics and might be a cost-effective alternative for restoring primary anterior teeth in future. How to cite this article Gugnani N, Pandit IK, Gupta M, Nagpal J. Esthetic Rehabilitation of Primary Anterior Teeth using Temporization Material: A Novel Approach. Int J Clin Pediatr Dent 2017;10(1):111-114. PMID:28377667

Morphology of the larval shell of three oyster species of the genus Crassostrea Sacco, 1897 (Bivalvia: Ostreidae).

PubMed

Christo, S W; Absher, T M; Boehs, G

2010-08-01

In this study we describe the morphology of the larval shell of three oyster species of Crassostrea genus. Two species, C. rhizophorae and C. brasiliana, are native to the Brazilian coast, and C. gigas is an introduced species. Samples of laboratory reared larvae, obtained through artificial fertilisation, were collected at intervals during the cultivation process for analysis using Scanning Electron Microscopy (SEM). Prodissoconch morphology was observed in relation to the presence, position, form and number of teeth in the three larval stages: D-shaped larva, umbo larva and pediveliger. Characteristic of D-shaped larvae of C. rhizophorae was the total absence of teeth in the provinculum area while C. brasiliana and C. gigas had two anterior and two posterior teeth in each valve. In the umbo larval phase, the three species had the same number of teeth in each valve: two posterior and two anterior teeth in the right valve and three posterior and three anterior in the left valve. In the pediveliger stage the three species could be differentiated by the number of anterior teeth of the right valve: C. rhizophorae had two teeth, C. brasiliana one tooth and C. gigas three teeth.

Microlepidogaster arachas, a new species of hypoptopomatine catfish (Siluriformes: Loricariidae) from the upper rio Paraná basin, Brazil.

PubMed

Martins, Fernanda O; Calegari, Bárbara B; Langeani, Francisco

2013-01-22

Microlepidogaster arachas Martins, Calegari & Langeani, sp. nov., a new Hypoptopomatinae, is described from the upper rio Paraná basin. The new species is distinguished from M. longicolla and M. dimorpha by having the anterior portion of the compound supraneural plus first dorsal-fin proximal radial contacting the neural spine of the ninth vertebra. The new species differs from M. perforatus by having 18-29 dentary teeth; median series of lateral plates complete, reaching caudal-peduncle end, and continuous lateral line; and 20-24 mid-dorsal plates. Microlepidogaster arachas is further distinguished from its congeners by several other osteological features.

Whitening of endodontically untreated calcified anterior teeth.

PubMed

Pedorella, C A; Meyer, R D; Woollard, G W

2000-01-01

Definitive treatment for whitening endodontically untreated anterior teeth with dystrophic calcification is provided by removing the coronal sclerotic dentin and utilizing internal and external bleaching as necessary.

Effectiveness of the transpalatal arch in controlling orthodontic anchorage in maxillary premolar extraction cases: A systematic review and meta-analysis.

PubMed

Diar-Bakirly, Samira; Feres, Murilo Fernando Neuppmann; Saltaji, Humam; Flores-Mir, Carlos; El-Bialy, Tarek

2017-01-01

To evaluate the effectiveness of the transpalatal arch (TPA) as an anchorage device in preventing maxillary molar mesialization during retraction of the anterior teeth after premolar extraction. This systematic review intended to include patients indicated for upper premolar bilateral extraction and subsequent retraction of anterior teeth, considering the use of TPA as an anchorage tool in one of the treatment groups. The search was systematically performed, up to April 2015, in the following electronic databases: Medline, Embase, and all evidence-based medicine reviews via OVID, Cochrane Library, Scopus, PubMed, and Web of Science. Risk of bias assessment was performed using Cochrane's Risk of Bias Tool for randomized clinical trials (RCTs) and Methodological Index for Nonrandomized Studies (MINORS) for non-RCTs. Fourteen articles were finally included. Nine RCTs and five non-RCTs presented moderate to high risk of bias. Only one study investigated the use of TPA in comparison with no anchorage, failing to show significant differences regarding molar anchorage loss. A meta-analysis showed a significant increase in anchorage control when temporary anchorage devices were compared with TPA (mean difference [MD] 2.09 [95% confidence interval {CI} 1.80 to 2.38], seven trials), TPA + headgear (MD 1.71 [95% CI 0.81 to 2.6], four trials), and TPA + utility arch (MD 0.63 [95% CI 0.12 to 1.15], 3 trials). Based on mostly moderate risk of bias and with some certainty level, TPA alone should not be recommended to provide maximum anchorage during retraction of anterior teeth in extraction cases.

[Evaluation of labial surface root filling combined with porcelain dental restoration].

PubMed

Liu, Yuan-qiao; Huang, Zhi-hua; Hu, Huan-yu

2015-04-01

To analyze the effect of porcelain dental restoration combined with labial surface root filling for the anterior teeth. One hundred cases with anterior teeth protrusion treated in our department from January 2010 to January 2014 underwent porcelain dental restoration combined with labial surface root filling. The measurements in cephalometric X-ray films before and after treatment were compared, and porcelain dental appearance and function were evaluated. The data was statistically analyzed with SPSS18.0 software package. After treatment, U1-SN, U1-X, U1-Y were significantly lower than before treatment (P<0.01). U1-L1 was significantly higher after treatment (P<0.01). The incidence of gingivitis after treatment decreased significantly (X(2)=16.2749,P=0.0000<0.01). The excellent rate of outline of porcelain teeth after treatment, correction of protruding anterior teeth, fitting with adjacent teeth and alleviation of deep overbite and deep cover was 96.00%, 95.00%, 98.00% and 91.00%, respectively. Porcelain dental restoration after root canal treatment can effectively improve anterior teeth protrusion and increase the aesthetic appearance, which is worthy of clinical application.

Evaluation of age-related changes with cross-sectional CT imaging of teeth

NASA Astrophysics Data System (ADS)

Fukui, Tatsumasa; Kita, Kanade; Kamemoto, Hiromasa; Nishiyama, Wataru; Yoshida, Hiroyasu; Iida, Yukihiro; Katsumata, Akitoshi; Muramatsu, Chisako; Fujita, Hiroshi

2017-03-01

Tooth pulp atrophy occurs with increasing age. An age estimation procedure using dental cone beam computed tomography (CBCT) imaging was developed. Clinical dental CBCT images of 60 patients (aged from 20 to 80 years) were evaluated. The ratio of the cross-sectional area of the pulp cavity to the cross-sectional area of the tooth (pulp cavity ratio) was calculated. The pulp cavity ratio in the labio-lingual plane of the mandibular anterior teeth and the mesio-distal plane of the maxillary anterior teeth was strongly correlated with the patients' age. The pulp cavity ratio of anterior teeth may be a useful parameter for estimating age.

Multidisciplinary approach to restoring anterior maxillary partial edentulous area using an IPS Empress 2 fixed partial denture: a clinical report.

PubMed

Dundar, Mine; Gungor, M Ali; Cal, Ebru

2003-04-01

Esthetics is a major concern during restoration of anterior partial edentulous areas. All-ceramic fixed partial dentures may provide better esthetics and biocompatibility in the restoration of anterior teeth. This clinic report describes a multidisciplinary approach and treatment procedures with an IPS Empress 2 fixed partial denture to restore missing anterior teeth.

Dentomaxillofacial characteristics of ectodermal dysplasia.

PubMed

Nakayama, Yumiko; Baba, Yoshiyuki; Tsuji, Michiko; Fukuoka, Hiroki; Ogawa, Takuya; Ohkuma, Mizue; Moriyama, Keiji

2015-02-01

The aim of this retrospective hospital-based study was to elucidate the dentomaxillofacial characteristics of ectodermal dysplasia. Six Japanese individuals (one male and five female; age range, 12.7-27.2 years) underwent comprehensive examinations, including history recording, cephalometric analysis, panoramic radiography, and analysis of dental models. All the subjects had two or more major manifestations for clinical diagnosis of ectodermal dysplasia (e.g., defects of hair, teeth, nails, and sweat glands). They presented hypodontia (mean number of missing teeth, 9.5; range, 5-14), especially in the premolar region, and enamel dysplasia. Five subjects had bilateral molar occlusion, whereas one subject had unilateral molar occlusion. The common skeletal features were small facial height, maxillary hypoplasia, counterclockwise rotation of the mandible, and mandibular protrusion. Interestingly, the maxillary first molars were located in higher positions and the upper anterior facial height was smaller than the Japanese norm. The results suggest that vertical and anteroposterior maxillary growth retardation, rather than lack of occlusal support due to hypodontia, leads to reduced anterior facial height in individuals with ectodermal dysplasia. © 2014 Japanese Teratology Society.

Use of a Novel ORMOCER as a Universal Direct Restorative Material.

PubMed

Hakim, Foroud; Vallée, Jessie

2018-01-01

Composite resin is considered the material of choice for direct restoration of teeth when esthetic outcome is a high priority. While material science improvements have mitigated many of the traditional liabilities related to composite resin restorations, shrinkage and related shrinkage stress still play a role in outcomes, placement techniques, and overall success. This case report demonstrates two restorative scenarios using an ORMOCER® composite material. The first features a female patient who, upon completion of preliminary orthodontic treatment, determined in consultation with the orthodontist that her central incisors would present more idealistic display and esthetics if they were lengthened by approximately 1.5 mm. The lengthening of the incisors was to precede the phase II refinement with clear aligners, which would aim to extrude the remaining anterior teeth to develop incisal balance and symmetry. The second case is that of a woman who presented with a newly symptomatic upper right second bicuspid with an existing nearly decade old, large MODL composite resin restoration. This article demonstrates the universal nature of the novel direct restorative material used, making it well-suited for both anterior and posterior applications.

Comparison of Amount of Primary Tooth Reduction Required for Anterior and Posterior Zirconia and Stainless Steel Crowns.

PubMed

Clark, Larkin; Wells, Martha H; Harris, Edward F; Lou, Jennifer

2016-01-01

To determine if aggressiveness of primary tooth preparation varied among different brands of zirconia and stainless steel (SSC) crowns. One hundred primary typodont teeth were divided into five groups (10 posterior and 10 anterior) and assigned to: Cheng Crowns (CC); EZ Pedo (EZP); Kinder Krowns (KKZ); NuSmile (NSZ); and SSC. Teeth were prepared, and assigned crowns were fitted. Teeth were weighed prior to and after preparation. Weight changes served as a surrogate measure of tooth reduction. Analysis of variance showed a significant difference in tooth reduction among brand/type for both the anterior and posterior. Tukey's honest significant difference test (HSD), when applied to anterior data, revealed that SSCs required significantly less tooth removal compared to the composite of the four zirconia brands, which showed no significant difference among them. Tukey's HSD test, applied to posterior data, revealed that CC required significantly greater removal of crown structure, while EZP, KKZ, and NSZ were statistically equivalent, and SSCs required significantly less removal. Zirconia crowns required more tooth reduction than stainless steel crowns for primary anterior and posterior teeth. Tooth reduction for anterior zirconia crowns was equivalent among brands. For posterior teeth, reduction for three brands (EZ Pedo, Kinder Krowns, NuSmile) did not differ, while Cheng Crowns required more reduction.

Diagnosing and treatment planning inadequate tooth display.

PubMed

Spear, F

2016-10-21

Some of the most challenging patients to produce a pleasing smile for are those who present with inadequate tooth display (either due to tooth position, the patient has normal size teeth, but they aren't exposed adequately to fill out the smile) or due to tooth size (the teeth are small, often due to tooth wear). The key to understanding how to manage these patients is to learn to understand the possible aetiologies that could produce the condition, and learn how to diagnose which aetiologies exist for your patient. Potential aetiologies for inadequate tooth display in patients with normal length unworn anterior teeth: excessive lip length; inadequate lip mobility; inadequate vertical eruption of the anterior teeth; inadequate facial prominence of the maxillary anterior teeth; vertical maxillary deficiency; and anterior maxillary deficiency.This article, the first in a British Dental Journal series on the topic of aesthetic dentistry, reviews the clinical findings consistent with diagnosing each of the above etiologies, and then reviews the treatment options available for correcting the inadequate tooth display.

Regenerative Endodontic Treatment versus Apical Plug in Immature Teeth: Three-Year Follow-Up.

PubMed

Asgary, Saeed; Fazlyab, Mahta; Nosrat, Ali

This report compares and evaluates the treatment outcomes of regenerative endodontic treatment and apical plug as two accepted treatment protocols in a pair of necrotic immature maxillary central incisors of a 12-year old female. The patient was referred complaining of a dull pain and swelling in her upper lip area. She had a history of trauma to the anterior maxilla two years earlier. Both teeth were clinically diagnosed with pulp necrosis and periapical radiographs revealed that separate periapical radiolucent lesions surrounded the immature apices of both teeth. The left and right incisors were treated with apical plug and regenerative endodontic treatment, respectively, using calcium-enriched mixture (CEM) cement. The patient was followed-up for three years. During this period, both teeth were clinically asymptomatic and showed complete radiographic healing of the periapical lesions. The right central incisor showed root development. No tooth discoloration was evident. Apexification by apical plug placement and pulp regeneration are both reliable treatments for immature non-vital teeth. In order to choose the right treatment the advantages of either technique should be weighed against its drawbacks. CEM cement can be successfully applied for both purposes. This biomaterial causes less discoloration of the tooth.

Heritability estimates of dental arch parameters in Lithuanian twins.

PubMed

Švalkauskienė, Vilma; Šmigelskas, Kastytis; Šalomskienė, Loreta; Andriuškevičiūtė, Irena; Šalomskienė, Aurelija; Vasiliauskas, Arūnas; Šidlauskas, Antanas

2015-01-01

The genetic influence on dental arch morphology may be country-specific, thus it is reasonable to check the estimates of genetics across different populations. The purpose of this study was to evaluate the heredity of dental arch morphology in the sample of Lithuanian twins with accurate zygosity determination. The study sample consisted of digital dental models of 40 monozygotic (MZ) and 32 dizygotic (DZ) twin pairs. The estimates of heritability (h(2)) for dental arch breadth and length were calculated. All dental arch breadths and lengths were statistically significantly larger in men than in women. Arch length differences between genders were less expressed than largest breadth differences. In the upper jaw the largest genetic effect was found on the arch breadth between lateral incisors. The heritability of dental arch length demonstrated similar differences between upper and lower jaw with mandible dental arch length being more genetically determined. The largest genetic impact was found on the upper dental arch breadth between lateral incisors. Similar, but lower heritability is inherent for canines and first premolars of the upper jaw and first premolars of the lower jaw. It also can be noted, that arch breadths between posterior teeth show lower heritability estimates than between anterior teeth on both jaws. The dental arch in the upper jaw has more expressed genetic component than in the lower jaw.

Applications of cone-beam computed tomography to assess the effects of labial crown morphologies and collum angles on torque for maxillary anterior teeth.

PubMed

Kong, Wei-Dong; Ke, Jun-Yu; Hu, Xiang-Quan; Zhang, Wu; Li, Shu-Shu; Feng, Yi

2016-11-01

Currently, cone-beam computed tomography (CBCT) has been widely used because of its capacity to evaluate the anatomic structures of the maxilla, mandible, and teeth in 3 dimensions. However, articles about the use of CBCT to evaluate the relationships between the morphology of individual teeth and torque expression remain rare. In this study, we aimed to determine the influence of labial crown morphologies and collum angles on torque for maxillary anterior teeth using CBCT. A total of 206 extracted maxillary anterior teeth were selected to establish scanning models using dental wax, and they were scanned by CBCT. Three-dimensionally reconstructed images and median sagittal sections of the teeth were digitized and analyzed with AutoCAD software (Autodesk, San Rafael, Calif). The angle α, formed by the intersection of the tangent at a certain vertical height on the labial surface from the incisal edge with the crown long axis, and the collum angle, were measured. The variations in angle α at different heights from the incisal edge for the same type of tooth were statistically significantly different (P <0.001). Moreover, the variations between collum angles and 0° for any type of maxillary anterior tooth were statistically significant (P <0.01). This study suggested that there are great differences in labial crown morphologies and collum angles for maxillary anterior teeth between persons, indicating that the morphologies of these teeth do play important roles in torque variations. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Evidence from tooth surface morphology for a posterior maxillary origin of the proteroglyph gang

USGS Publications Warehouse

Jackson, K.; Fritts, T.H.

1995-01-01

Although the front-fanged venom delivery system of the Elapidae is believed to be derived from an aglyphous or opisthoglyphous colubroid ancestor, opinion is divided as to the end of the maxilla on which the proteroglyph fang originated. This study was undertaken to determine whether the evolutionary precursor of the proteroglyph fang was (a) a grooved posterior fang which migrated anteriorly, or (b) an enlarged anterior tooth which secondarily developed a groove for the conduction of venom. The surface morphology of the maxillary teeth of colubrid genera was examined using scanning electron microscopy. Ridges present on the lingual and labial surfaces of anterior maxillary teeth and on the anterior and posterior surfaces of posterior maxillary teeth were identified as morphological markers of potential value in distinguishing the anterior and posterior maxillary teeth of colubrid snakes, and in determining the origin of the proteroglyph fang. Patterns of ridges on the surfaces of elapid fangs examined were found to be consistent with the hypothesis that the evolutionary precursor of the proteroglyph fang was an opisthoglyph fang which migrated anteriorly.

[Plastic bonding material as the origin of mucosal disorders].

PubMed

Kühl, W

1979-10-01

A case reported in which the patient complained of sensations in the musoca over a period of one year. Various other specialists were consulted, but the cause of these sensations could not be established. When the plastic facing on the upper anterior crowns was removed, the sensations disappeared. A metal-ceramic bridge was inserted, and the patient was fitted with a removable dental prosthesis containing teeth made of mineral substance and a base of injection moulding (Copodon). The patient is still free of complaints.

Malocclusion of teeth

MedlinePlus

Crowded teeth; Misaligned teeth; Crossbite; Overbite; Underbite; Open bite ... Occlusion refers to the alignment of teeth and the way that the upper and lower teeth fit together (bite). The upper teeth should fit slightly over the lower teeth. ...

Analysis of the golden proportion and width/height ratios of maxillary anterior dentition in patients with lateral incisor agenesis.

PubMed

Pini, Núbia Pavesi; de-Marchi, Luciana Manzotti; Gribel, Bruno Frazão; Ubaldini, Adriana Lemos Mori; Pascotto, Renata Corrêa

2012-12-01

  The purpose of this study was to assess the presence of the golden proportion (GP) in the facial view tooth-to-tooth width proportion of the six maxillary anterior teeth and to evaluate the width/height (W/H) ratios of the incisors of patients with maxillary lateral incisor (LI) agenesis treated either with implants or orthodontically (by moving canines into the position of the laterals, recontouring them, and placing composite restorations over the repositioned teeth).   Forty-eight patients with LI agenesis were divided into four experimental groups: unilateral recontouring group (N = 10), bilateral recontouring group (BRG, N = 18), unilateral implant group (UIG, N = 10), bilateral implant group (N = 10), and a control group (CG, N = 25) of patients without agenesis. GP ratios were determined on patients' dental casts placed over Levin's grids, whereas W/H ratios were measured directly on the casts and a millimeter ruler to determine these distances. Statistical analysis was performed with Shapiro-Wilk, Kruskal-Wallis, Mann-Whitney, Friedman, and Wilcoxon tests (p < 0.05).   The incidence of GP in the tooth-to-tooth width proportions was significantly different between groups and more commonly found between centrals and laterals than between laterals and canines. The GP was more likely to be observed in the BRG, UIG, and CG. The results demonstrated that the GP was not found to be present in the majority of the cases treated with maxillary agenesis, regardless of the method of treatment. The mean W/H ratios of the laterals ranged between 0.75 and 0.90.   Although the GP may be a useful diagnostic guide, it was not observed in the majority of esthetic outcomes of patients treated with maxillary LI agenesis in this study. The assessment of the golden proportion and width/height ratio of upper anterior teeth in patients with upper lateral incisor agenesis treated with either implants or tooth re-contouring may assist dentists and patients in deciding the best treatment option based on the peculiarities of each case. © 2012 Wiley Periodicals, Inc.

Colorimetric values of esthetic stainless steel crowns.

PubMed

Hosoya, Yumiko; Omachi, Koichi; Staninec, Michal

2002-01-01

The colorimetric values of two different kinds of esthetic stainless steel crowns were measured and compared with the colorimetric values of primary anterior teeth in Japanese children. The colorimetric values of resin composite-faced stainless steel crowns (Kinder Krown) and epoxy-coated stainless steel crowns (White Steel Crown) were measured with a color difference meter. The Commission Internationale de Eclairage L*, a*, b*, and delta E*ab values and Munsell value, chroma, and hue were calculated. The data were compared with previously reported colorimetric values of Japanese primary anterior teeth measured with the same color difference meter used in this study. Compared to Japanese primary anterior teeth, Kinder Krown Pedo I and Pedo II showed much higher L* values and lower hue; on the other hand, White Steel Crown showed much higher L*, a*, b* values, much higher value and chroma, and much lower hue. Color analysis revealed that the colors of the White Steel Crown and Kinder Krown Pedo I were substantially different from the color of Japanese primary anterior teeth. The color difference between Pedo II crowns and Japanese primary anterior teeth was relatively high, but the color of Pedo II might be acceptable for clinical use.

Dentoalveolar class III treatment using retromolar miniscrew anchorage.

PubMed

Poletti, Laura; Silvera, Aimara A; Ghislanzoni, Luis T Huanca

2013-05-23

In this article, we report the successful use of miniscrews in the distalization of the lower dentition to correct an Angle class III malocclusion with lower anterior crowding in a dolichofacial adult patient. Conventional intraoral and extraoral appliances have many disadvantages, including the need for patient cooperation, potential for anchorage loss, and vertical extrusion of upper molars and lower incisors. Extrusion should be prevented or minimized when treating long-faced patients with reduced overbite. After third molar extractions, miniscrews were placed in the retromolar area. A sliding jig was applied to distalize the lower molars, while the anterior teeth were bonded and retracted secondarily to avoid round tripping. After 18 months of treatment, molar and canine class I relationship with normal overjet and overbite were achieved. In addition, there was an esthetic improvement in the profile with only a small increase of the lower anterior facial height. These results remained stable at a 12-month follow-up.

Development of horizontal tooth wear in maxillary anterior teeth from five to 18 years of age.

PubMed

Nyström, M; Könönen, M; Alaluusua, S; Evälahti, M; Vartiovaara, J

1990-11-01

Sizes of horizontal wear facets of maxillary anterior teeth were studied longitudinally from the primary dentition at age five to the young adult dentition at the age of 18 years. By a planimetric method, we calculated the wear areas on dental casts taken at the ages of five, ten, 14, and 18 years from the dentition of 39 healthy, orthodontically untreated subjects with good morphological occlusion. For young adults, we also studied the association between the amount of wear and reported parafunctions, maximal bite force, salivary buffer capacity, salivary flow rate, and some cephalometric variables. Size of wear facets on all anterior teeth increased with age. Significant correlations were found between the total wear areas of the six anterior primary teeth at five years of age and those of their permanent successors at age 14 (r = 0.44) and 18 (r = 0.39). For an individual, tooth wear at five years of age was, however, of low predictive value for tooth wear in young adulthood, whereas tooth wear at 14 years of age predicted it well (r = 0.89). Highest correlations between tooth wear and background factors at 18 years of age were found for maximal anterior bite force (r = 0.44) and for the size of the gonial angle (r = -0.31). Wear of anterior teeth was not associated with reported parafunctions in young adulthood.

Effects of background, direction and intensity of ambient light, measuring position, and adjacent teeth, on anterior tooth colour measurement in vitro.

PubMed

Ma, Jian Feng; Du, Ruo Xi; Wang, Si Qian; Li, Yi Ming

2010-01-01

to investigate the effects of different background colours (black, white or pink), direction and intensity of ambient light, measuring position, and the adjacent teeth, on the in vitro colour measurement of maxillary anterior teeth, using the Minolta CR-321 colorimeter. ten extracted human maxillary central incisors were selected. A fibre-optic light MI-150 was used as the ambient illuminant. Teeth were irradiated from a 3- or 12-o'clock direction. L*a*b* values of seven sites on the labial surfaces were obtained by means of the Minolta CR-321 colorimeter, using three background colours, with or without the adjacent teeth. The recorded data were analysed with two-tailed Student t tests and analysis of variance (α = 0.05). the ambient light did not affect the colour measurement of anterior teeth, regardless of the presence or absence of the adjacent teeth. There were no statistically significant differences in L*a*b* values at the same position under different background colours, except ΔE12 (colour difference between site 1 and site 2) between black and white backgrounds. ΔE12 (under black background), ΔE13 and ΔE15 were greater than 1.5, while the others were lower than 1.5. the background, ambient light and the presence of adjacent teeth did not affect the colour measurement of anterior teeth using the Minolta CR-321 colorimeter in vitro. The inherent disadvantages of using the naked eye during clinical visual shade assessment may be overcome by the colorimeter.

Influences of age and maxillary anterior teeth status on patient's satisfaction with dental appearance and tooth colour.

PubMed

Lajnert, Vlatka; Pavičić, Daniela K; Gržić, Renata; Kovač, Zoran; Pahor, Dana; Kuis, Davor; Simonić-Kocijan, Sunčana; Antonić, Robert; Bakarčić, Danko

2012-06-01

To study the impact of age, gender, tooth colour and maxillary anterior teeth status on patient's satisfaction with their dental appearance. A total of 259 Caucasian subjects participated in the study (119 men, mean age 56 years; 140 women, mean age 61 years) divided into three age groups (young <35 age; middle aged 35-54 age; old ≥55 age). Their maxillary anterior teeth status was classified into three groups: (1) natural teeth (NTG) group; (2) composite filling group (CFG) and (3) porcelain-fused-to-metal fixed prosthodontic restoration group (FPDG). The participants judged appearance and tooth colour using a scale with three categories: completely dissatisfied, moderately dissatisfied and completely satisfied. Almost half of the participants were completely satisfied with their dental appearance and tooth colour. Half of the 'young' and 'middle-aged' participants with natural maxillary anterior teeth were completely satisfied and half of the 'old' participants were moderately satisfied with their dental appearance and tooth colour. The majority of participants with composite restorations (45-51%) were moderately satisfied with their dental appearance, one-third of 'young' and 'middle-aged' participants were moderately satisfied or dissatisfied with their tooth colour and more than 70% of older participants were dissatisfied with their tooth colour (p > 0.05). Satisfaction with the appearance of the maxillary anterior teeth differed both between individuals of different age and different dental status. © 2011 The Gerodontology Society and John Wiley & Sons A/S.

Protraction of mandibular second and third molars into missing first molar spaces for a patient with an anterior open bite and anterior spacing.

PubMed

Baik, Un-Bong; Chun, Youn-Sic; Jung, Min-Ho; Sugawara, Junji

2012-06-01

In a young woman, aged 18 years 8 months, who had an anterior open bite and anterior spacing, the right and left mandibular first molar extraction spaces were closed by protraction of the second and third molars without reciprocal retraction of the incisors and the premolars. The amounts of protraction for the second molars were 12 mm on the right side and 11 mm on the left side. Two miniscrews were inserted into the mesiobuccal side of the edentulous spaces, and 2 more screws were inserted into the anterior sites after removing previous miniscrews. In addition, 4 miniscrews were inserted into the buccal and palatal sides between the first and second maxillary molars to intrude the maxillary posterior teeth, which had extruded into the missing mandibular spaces. Careful biomechanical consideration was used to prevent extrusion of the molars and worsening of the anterior open bite from protraction of the posterior teeth. Ultimately, the anterior open bite was corrected by both intrusion of the maxillary molars and extrusion of the maxillary anterior teeth. Excellent occlusion and correction of the anterior open bite were achieved without tipping, rotation of the posterior teeth, or other problems. The right mandibular third molar, which had been impacted at the beginning of treatment, erupted into the second molar space and functioned properly. At the 1-year follow-up examination, the patient had a slight anterior open bite, but closure of the first molar extraction spaces was well maintained. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Characteristics of Teeth: A Review of Size, Shape, Composition, and Appearance of Maxillary Anterior Teeth.

PubMed

McGowan, Steve

2016-03-01

Although digital technologies play an increasingly integral role in dentistry, there remains a need for dental professionals to understand the fundamentals of tooth anatomy, form, occlusion, and color science. In this article, the size, shape, composition, and appearance of maxillary anterior teeth will be discussed from esthetic and functional perspectives. A total of 600 extracted maxillary incisors were studied: 200 each of central incisors, lateral incisors, and cuspids. The purpose of the article is to exhibit and discuss factors that make teeth unique and diverse. Understanding these aspects of teeth aids dental professionals in more effectively creating realistic and highly esthetic restorations for patients.

A conservative approach for restoring anterior guidance: a case report.

PubMed

Pontons-Melo, Juan Carlos; Pizzatto, Eduardo; Furuse, Adilson Yoshio; Mondelli, José

2012-06-01

One of the most common dental problems in today's clinics is tooth wear, specifically when related to bruxism. In such cases, the esthetics of anterior teeth may be compromised when excessive wear to the incisal surfaces occurs. Anterior tooth wear resulting from parafunctional bruxism can be conservatively treated with the use of direct resin composite restorations. This restorative approach has the advantages of presenting good predictability, load resistance, acceptable longevity, preservation of healthy dental tissues, and lower cost when compared with indirect restorations. The use of resin composites to solve esthetic problems, however, requires skill and practice. Thus, the present article demonstrates a conservative approach for restoring the esthetics and function of worn anterior teeth with the aid of direct resin composite restorations and selective occlusal adjustment. A conservative approach to restore anterior teeth with excessive wear is possible with direct resin composites. © 2011 Wiley Periodicals, Inc.

A new species of Euprox (Cervidae, Artiodactyla) from the upper Miocene of the Linxia Basin, Gansu Province, China, with interpretation of its paleoenvironment.

PubMed

Hou, Sukuan

2015-01-16

The Linxia Basin, Gansu Province, China, is known for its abundant and well preserved fossils. Here a new species, Euprox grandis sp. nov., is established based on a skull and antlers collected from the upper Miocene Liushu Formation of the Linxia Basin. The new species is distinguishable from other Euprox species by its large body size, notably long pedicle and weak burr. The main beam and the brow tine are slightly curved both medially and backwards, and the apex of the main beam turns, curving slightly laterally. The upper cheek teeth are brachydont, with a clear central fold on the premolars and internal postprotocrista and metaconule fold on M1-M2. The cingulum is almost absent, only occasionally weakly developed at the anterior and lingual surface of the teeth. Cladistic analysis was carried out using the TNT software, and two most parsimonious trees were retained. As the strict consensus tree shows E. grandis appears to be an advanced muntiacine form, which may have a close relationship with the genus Muntiacus. The presence of E. grandis in the Linxia Basin adds new evidence to support a warm and humid environment during the late Miocene in the basin. 

Prosthetic treatment of oligodontia with a tooth-supported overdenture--a case report.

PubMed

Akeredolu, P A

2002-01-01

An unusual case of oligodontia is reported in a 20 year old Nigerian male. It is unusual because of the isolated occurrence of the oligodontia which is unassociated with a family history or any other clinical features suggestive of specific syndromes or severe systemic abnormality. The patient presented with conically or peg shaped anterior and malformed posterior teeth in both the maxilla and mandible. Full mouth periapical radiographs revealed stunted roots, widening of the periodontal space and an unerupted tooth in the right mandibular premolar region. Tooth-supported upper and lower removable partial overdenture were fabricated for him. This modality of treatment is a better choice which helps not only to preserve the alveolar ridge height and improve aesthetics, but also preserves the proprioceptive mechanisms associated with the periodontal membrane of natural teeth.

Selecting maxillary anterior tooth width by measuring certain facial dimensions in the Kurdish population.

PubMed

A L-Kaisy, Neda; Garib, Balkees Taha

2016-03-01

One of the most difficult aspects of complete denture fabrication is selecting appropriately sized maxillary anterior teeth that will harmonize with the face. There are no generally accepted or naturally observed principles to guide dentists in this selection. The purpose of this study was to determine whether a relationship exists between various facial measurements and the different single or combined mesiodistal widths of maxillary anterior teeth in a Kurdish population. A total of 65 Kurdish dental students participated in this study. Two standardized digital photographs of the face (relaxed and smiling capture) were recorded. The interpupillary distance (IPD), inner canthal distance (ICD), interalar distance (IAD), and width of the 2 central incisors were determined by Image J software. The mesiodistal width and the combined straight-line width of the centrals, laterals, and canines were measured directly from the casts of the participants with digital calipers. A simple linear regression and the Pearson correlation coefficient were used to investigate the relationship between the particular facial measurement and the widths of the anterior teeth (α=.05). Significant correlations existed between the IPD and different tooth measurements; the highest was with the mean width of the canines (r=0.55). The proposed proportion between the IPD and the central incisor width was 6.93. The golden proportion of the ICD to the width of the central incisors and of the IAD to the straight-line width of the 6 anterior teeth could be used as a dependent parameter in Kurdish men. The IPD can be used to predict the width of anterior teeth in both sexes. In men, the width of the central incisors may be estimated from the ICD and the straight-line width of the 6 anterior teeth from the IAD. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Biometric ratio in estimating widths of maxillary anterior teeth derived after correlating anthropometric measurements with dental measurements.

PubMed

Kini, Ashwini Y; Angadi, Gangadhar S

2013-06-01

To correlate dental measurements i.e. combined mesiodistal width of six maxillary anterior teeth with facial measurements i.e. inner canthal distance, interpupillary distance and intercommissural width and acquire a biometric ratio to serve as a preliminary guide in selection of the maxillary anterior teeth. In the absence of pre-extraction records, the resultant denture can lead to patient dissatisfaction towards the aesthetic appeal of their dentures. The maxillary anterior teeth play a pivotal role in denture aesthetics. Various techniques and biometric ratios have been described in literature for selection of the maxillary anteriors. This study derives a biometric ratio for the same, obtained after correlating anthropometric measurements with dental measurements. Two standardized digital photographs of the face were generated; one, when the facial muscles were relaxed and the other, when the subject was smiling; thereby, revealing the maxillary anterior teeth upto the canine tip. Inner canthal distance, interpupillary distance, intercommissural distance, distance between the tips of the maxillary canines and distance between the distal surfaces of the canines were measured. On the cast, the distance between tips of maxillary canines and distance between distal surfaces of maxillary canines were noted. The data was analysed using Spearman's rank correlation coefficient. A high correlation was found between the intercommissural measurement with distance between the tips of the canines on the photograph and between the tips of the canines on the cast with the interpupillary distance, giving a biometric ratio of 1:1.35 and 1:1.41 respectively. The least correlation was between the inner canthal distance and the tips of the canines measured on the photograph. Extra oral anthropometric measurements of the interpupillary distances and the intercommissural distances with the help of standardised photographs can help us determine the combined widths of the anterior teeth accurately, thus aiding their selection in the absence of pre-extraction records. © 2012 John Wiley & Sons A/S and The Gerodontology Society. Published by John Wiley & Sons Ltd.

Orthodontists' and laypeople's perception of smile height aesthetics in relation to varying degrees of transverse cant of anterior teeth.

PubMed

Shiyan, Huang; Xu, Qian; Shuhao, Xu; Nanquan, Rao; Xiaobing, Li

2016-05-01

To determine the effect of varying the transverse cant of the anterior teeth on orthodontists' and laypeople's perceptions of smile aesthetics, and the influence that smile height has on this perception. A 20-year-old Chinese female with an aesthetic smile and normal occlusion was chosen and agreed to participate. Digital pictures of her posed smile were taken and manipulated to create three smile height variations: low, medium, or high. Each variation was further manipulated to create varying degrees of transverse anterior tooth cant. Fifty-six laypeople and 40 orthodontists participated as raters of the dental and facial impact of the altered smile images. The orthodontists more commonly and precisely identified the transverse cants of the anterior teeth and the detracting influence on smile aesthetics compared with laypersons. The orthodontists accepted a lesser range of anterior transverse cant. Increased smile heights enhanced the capability of all raters to detect a transverse cant and reduced the acceptable cant range. In addition, an increased smile height worsened the detracting effects of the transverse anterior cant in all raters' perceptions of smile aesthetics. An increased display of teeth and angulation of an anterior cant increased the ability of raters in both groups to detect differences. Transverse cants of anterior teeth can affect orthodontists' and laypeople's perceptions of smile aesthetics. Smile height and incisor display were significant factors that affected the orthodontist's and layperson's perceptions of smile aesthetics, and suggested that a description of the detracting effect of an anterior transverse cant should also consider smile height. A transverse occlusal cant is an important aesthetic factor used by clinicians during orthodontic diagnosis and review. It is important to appreciate that there is a difference in perception between orthodontic professionals and patients (laypeople). The extent of this perceptual difference and influencing factors could help the clinician set more appropriate treatment goals.

Spontaneous correction of anterior crossbite by RPE anchored on deciduous teeth in the early mixed dentition.

PubMed

Rosa, M; Lucchi, P; Mariani, L; Caprioglio, A

2012-09-01

The purpose of this study was to evaluate the effectiveness of Haas RPE anchored on deciduous teeth in the early mixed dentition, for inducing the spontaneous correction of permanent incisor's crossbite, without compliance, without post bite-plane and no involvement of the permanent teeth. The sample group comprised 50 consecutive patients (mean age 8y 5m, SD 2y 1m), 31 males, 19 females. They showed a cross-bite affecting one or more permanent incisors, for a total of 70 teeth. The patients were treated with Haas RPE appliance anchored on second deciduous molars and bonded on deciduous canines. No direct forces were applied on the permanent teeth. Anterior crossbite self-corrected 'spontaneously' in 84% of the cases. Lateral incisors had a higher rate of self-correction than central incisors. All hyper-divergent subjects showed a spontaneous crossbite self-correction. The early maxillary expansion by Haas RPE anchored on deciduous teeth is an efficient and effective procedure to induce the anterior crossbite self-correction in the early mixed dentition without the need of a bite-plane, no involvement of the permanent teeth and without compliance.

Dental esthetic satisfaction, received and desired dental treatments for improvement of esthetics.

PubMed

Akarslan, Zühre Zafersoy; Sadik, Burak; Erten, Hüya; Karabulut, Erdem

2009-01-01

The purposes of this research were to investigate factors influencing patients' satisfaction with their present dental esthetic, received previous dental treatments on anterior teeth and basic treatments that they wanted to undergo to improve their dental appearance. A total of 1014 patients who attended a dental school in a major city in Turkey participated in the study. The participants were surveyed with a questionnaire containing questions about gender, age, education level, self-reported tooth appearance, received previous dental treatments on anterior teeth and desired basic esthetic dental treatments. Statistical analysis of the verifying data was made with descriptive statistics, chi2 test and multiple logistic regression analyses. According to the analyses of the verifying data, 55.1% of the patients were dissatisfied with the color of their teeth, 42.7% with dental appearance, 29.9% with crowding of anterior teeth, 23.3% were hiding teeth while smiling, 16.1% had non-esthetic restorations and 11.9% thought that their anterior teeth were protruding. Esthetic restoration was found to be the most-performed treatment recently (29.0%) and whitening of teeth was the most-desired dental treatment (49.0%). Gender, age and education level had an effect on satisfaction and received previous and desired dental treatments for improvement of esthetics. Many of the Turkish patients surveyed in the study were dissatisfied and desired the improvement of dental esthetics. Therefore, dentists should consider this as an important dimension in their practice.

In vivo measurements of tooth wear over 12 months.

PubMed

Rodriguez, J M; Austin, R S; Bartlett, D W

2012-01-01

The aim of this study was to measure the progression of tooth wear in a cohort of 63 patients, 43 males and 20 females with a mean age of 39.1 years. Recruitment followed referral from general practice to Guy's Hospital for advice/management of tooth wear. Addition silicone impressions were taken at 6-month intervals for a total of 12 months; impressions were subsequently poured in type IV gypsum. Casts were scanned using a non-contacting laser profilometer and then superimposed using Geomagic® Qualify 11. Wear was measured in μm by tooth per time interval. A questionnaire highlighting dietary, parafunctional and gastric risk factors was obtained from each participant. Clustered multiple regression analysis was used to determine the relationship between tooth wear progression and risk factors. Maximum follow-up times were 6 months for 63 participants and 12 months for 30 participants. The measurement error was 15 μm. At the tooth level, 72.2% of 1,078 teeth wore <15 μm over a 6-month period. At the subject level, 77.7% of 63 participants showed median wear <15 μm over a 6-month period. There was a statistical trend towards tooth wear progression being associated with gastric risk factors (p < 0.05). The lower molars and the upper anterior teeth were the most commonly affected teeth; the lower molars and the upper central incisors were the most severely affected teeth. Tooth wear progression was slow in this cohort, suggesting that tooth wear may be cyclical and inactive in the majority of participants. Copyright © 2011 S. Karger AG, Basel.

Age-related changes of the dental aesthetic zone at rest and during spontaneous smiling and speech.

PubMed

Van der Geld, Pieter; Oosterveld, Paul; Kuijpers-Jagtman, Anne Marie

2008-08-01

The aims of this study were to analyse lip line heights and age effects in an adult male population during spontaneous smiling, speech, and tooth display in the natural rest position and to determine whether lip line height follows a consistent pattern during these different functions. The sample consisted of 122 randomly selected male participants from three age cohorts (20-25 years, 35-40 years, and 50-55 years). Lip line heights were measured with a digital videographic method for smile analysis, which had previously been tested and found reliable. Statistical analysis of the data was carried out using correlation analysis, analysis of variance, and Tukey's post hoc tests. Maxillary lip line heights during spontaneous smiling were generally higher in the premolar area than at the anterior teeth. The aesthetic zone in 75 per cent of the participants included all maxillary teeth up to the first molar. Coherence in lip line heights during spontaneous smiling, speech, and tooth display in the natural rest position was confirmed by significant correlations. In older subjects, maxillary lip line heights decreased significantly in all situations. Lip line heights during spontaneous smiling were reduced by approximately 2 mm. In older participants, the mandibular lip line heights also changed significantly and teeth were displayed less during spontaneous smiling. Mandibular tooth display in the rest position increased significantly. Upper lip length increased significantly by almost 4 mm in older subjects, whereas upper lip elevation did not change significantly. The significant increasing lip coverage of the maxillary teeth indicates that the effects of age should be included in orthodontic treatment planning.

Stratification in anterior teeth using one dentine shade and a predefined thickness of enamel: a new concept in composite layering--Part I.

PubMed

Manauta, J; Salat, A; Putignano, A; Devoto, W; Paolone, G; Hardan, L S

2014-06-01

Restoring an anterior tooth has always been a challenge, regarding the shade matching, the choice of colors, opacities, translucencies of our composites and the final anatomical outcome. This article proposes a new method for color matching and a clinical stratification using a simple and reproducible procedure for anterior restorations. The physical and optical characteristics of enamel and dentine will be studied and applied to our dental materials that we are using to restore anterior teeth.

Removable orthodontic appliances: new perspectives on capabilities and efficiency.

PubMed

Hamid Zafarmand, A; Mahdi Zafarmand, M

2013-06-01

Removable appliances are a dependable choice for many patients but like all orthodontic appliances, they have some limitations in use. Patient selection and appropriate appliance design are two key factors for success. Many patients, especially adults, prefer intra-oral appliances to extra-oral devices. Sometimes a removable intra-oral appliance can solve a dental problem in a shorter period of time compared to fixed treatment, and this has also been repeatedly seen in molar distalisation. From the interceptive perspective, the appliance can prevent or alleviate an impending crowding for erupting permanent incisors. This article describes 5 patients with different orthodontic problems: impending crowding for erupting upper canine with 2 approaches, provision of space for upper cuspids, resolution of chronic attrition of anterior teeth, relief of space shortage for upper canines eruption, and reduction of excess overjet. All subjects were treated with removable appliances of various designs.

Angle Class I malocclusion treated with lower incisor extraction.

PubMed

Barbosa, Vanessa Leal Tavares

2013-01-01

In planning orthodontic cases that include extractions as an alternative to solve the problem of negative space discrepancy, the critical decision is to determine which teeth will be extracted. Several aspects must be considered, such as periodontal health, orthodontic mechanics, functional and esthetic alterations, and treatment stability. Despite controversies, extraction of teeth to solve dental crowding is a therapy that has been used for decades. Premolar extractions are the most common, but there are situations in which atypical extractions facilitate mechanics, preserve periodontal health and favor maintenance of the facial profile, which tends to unfavorably change due to facial changes with age. The extraction of a lower incisor, in selected cases, is an effective approach, and literature describes greater post-treatment stability when compared with premolar extractions. This article reports the clinical case of a patient with Angle Class I malocclusion and upper and lower anterior crowding, a balanced face and harmonious facial profile. The presence of gingival and bone recession limited large orthodontic movements. The molars and premolars were well occluded, and the discrepancy was mainly concentrated in the anterior region of the lower dental arch. The extraction of a lower incisor in the most ectopic position and with compromised periodontium, associated with interproximal stripping in the upper and lower arches, was the alternative of choice for this treatment, which restored function, providing improved periodontal health, maintained facial esthetics and allowed finishing with a stable and balanced occlusion. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO), as part of the requirements for obtaining the BBO Diplomate title.

Orthodontic treatment of an anterior openbite with the aid of corticotomy procedure: Case report

PubMed Central

Aljhani, Ali S.; Aldrees, Abdullah M.

2010-01-01

This case report illustrates the orthodontic treatment combined with the corticotomy technique in an adult patient to accelerate tooth movement and shorten the treatment time. The patient was a 22-year-old woman with an anterior open bite and flared and spaced upper and lower incisors. First, fixed orthodontic appliances (bidimensional edgewise brackets) were bonded, and a week later buccal and lingual corticotomy with alveolar augmentation procedure in the maxillary arch from the first molar to the contralateral first molar, and from canine to canine in the mandibular arch was performed. Orthodontic therapy proceeded with frequent activation of the appliances to retract the incisors every 2 weeks. The total treatment time was 5 months and no adverse effects were observed at the end of active treatment. The addition of the decortication procedure to the conventional orthodontic therapy decreased the duration of treatment significantly. Successful closure of the anterior open bite with adequate overbite and interdigitation of the teeth were achieved. PMID:24151417

Orthodontic treatment of an anterior openbite with the aid of corticotomy procedure: Case report.

PubMed

Aljhani, Ali S; Aldrees, Abdullah M

2011-04-01

This case report illustrates the orthodontic treatment combined with the corticotomy technique in an adult patient to accelerate tooth movement and shorten the treatment time. The patient was a 22-year-old woman with an anterior open bite and flared and spaced upper and lower incisors. First, fixed orthodontic appliances (bidimensional edgewise brackets) were bonded, and a week later buccal and lingual corticotomy with alveolar augmentation procedure in the maxillary arch from the first molar to the contralateral first molar, and from canine to canine in the mandibular arch was performed. Orthodontic therapy proceeded with frequent activation of the appliances to retract the incisors every 2 weeks. The total treatment time was 5 months and no adverse effects were observed at the end of active treatment. The addition of the decortication procedure to the conventional orthodontic therapy decreased the duration of treatment significantly. Successful closure of the anterior open bite with adequate overbite and interdigitation of the teeth were achieved.

Dental occlusion analysis in the Mesolithic-Neolithic Age, Bronze Age, and Roman to Medieval times in Serbia: Tooth size comparison in skeletal samples.

PubMed

Pajević, Tina; Glišić, Branislav

2017-05-01

Anthropological studies have reported that tooth size decreases in the context of diet changes. Some investigations have found a reverse trend in tooth size from the prehistoric to the modern times. The aims of this study were to analyze tooth size in skeletal samples from Mesolithic-Neolithic Age, Bronze Age, and Roman to Medieval times to determine sex differences and establish a temporal trend in tooth size in the aforementioned periods. Well-preserved permanent teeth were included in the investigation. The mesiodistal (MD) diameter of all teeth and buccolingual (BL) diameter of the molars were measured. Effects of sex and site were tested by one-way ANOVA, and the combined effect of these factors was analyzed by UNIANOVA. Sexual dimorphism was present in the BL diameters of all molars and MD diameters of the upper first and the lower third molar. The lower canine was the most dimorphic tooth in the anterior region. The MD diameter of most teeth showed no significant difference between the groups, (sample from: Mesolithic-Neolithic Age-group 1; Bronze Age-group 2; Roman times-group 3; Medieval times-group 4), whereas the BL diameters of the upper second and the lower first molar were the largest in the first group. Multiple comparisons revealed a decrease in the BL diameter of the upper second and the lower first molar from the first to the later groups. Lower canine MD diameter exhibited an increase in the fourth group compared to the second group. On the basis of the MD diameter, a temporal trend could not be observed for most of the teeth. The lower canine exhibited an increase in the MD diameter from the prehistoric to the Medieval times. Changes of BL diameter were more homogeneous, suggesting that the temporal trend of molar size decreased from the Mesolithic-Neolithic to Medieval times in Serbia. Copyright © 2017. Published by Elsevier Ltd.

Taking a Glance at Anterior Crossbite in Children: Case Series

PubMed Central

Ceyhan, Derya; Akdik, Canan

2017-01-01

Anterior crossbite is a malocclusion that takes place for various reasons, leads to major problems and may be fixed using various methods. This study aimed to provide an update regarding the methods used for anterior crossbite treatment presenting treatments of the removable active acrylic appliance with bite plane. Clinical examination of aged 9–15, seven healthy children who visited our clinic due to crowding and esthetic displeasure in anterior teeth indicated that one or more permanent maxillar incisor teeth were positioned behind of permanent mandibular incisor teeth. After clinical-radiographical examinations, removable active acrylic appliances with bite plane were decided to apply. Patients with adapted-activated appliances were called to follow-ups once a week. Treatments continued 4–6 weeks in mixed dentition, 7–8 weeks in permanent dentition. In choosing the method, advantages-disadvantages, indications-contraindications of methods should be discussed. Correct indication and suitable motivation are important for the success of anterior crossbite treatment. PMID:29326528

Analysis of the width ratio and wear rate of maxillary anterior teeth in the Korean population.

PubMed

Oh, Yeon-Ah; Yang, Hong-So; Park, Sang-Won; Lim, Hyun-Pil; Yun, Kwi-Dug; Park, Chan

2017-04-01

The purpose of this study was to compare the width ratio of maxillary anterior teeth according to age in the Korean population and to evaluate the maxillary central incisor width-to-length (W/L) ratio, given differences in age and gender. Ninety-three Korean adults were divided into 3 groups (n = 31) by age. Group I was 20 - 39 years old, Group II was 40 - 59 years old, and Group III was over 60 years of age. After taking an impression and a cast model of the maxillary arch, the anterior teeth width ratio and central incisor W/L ratio were calculated from standard digital images of the cast models using a graph paper with a digital single lens reflex (DSLR) camera. The calculated ratios were compared among all groups and central incisor W/L ratio were analyzed according to age and gender. All comparative data were statistically analyzed with one-sample t-tests, one-way ANOVAs with Tukey tests, and independent t-tests. No significant differences in maxillary anterior teeth ratios were found among the age groups. The maxillary central incisor W/L ratios in Group III were the greatest and were significantly higher than those in the other groups. The central incisor W/L ratio of men was higher than that of women in Group II. Maxillary anterior teeth width ratios were similar in all age groups in the Korean population. The maxillary central incisor was observed as worn teeth in the group over 60 years of age, and a significant difference between genders was found in 40 to 50 year olds.

Evaluating the effects of consolidation on intrusion and retraction using temporary anchorage devices-a FEM study.

PubMed

Namburi, Monica; Nagothu, Sleevaraju; Kumar, Chetan S; Chakrapani, N; Hanumantharao, C H; Kumar, Supradeep K

2017-12-01

Extraction of premolars and retracting the anterior teeth using mini-implants and anterior retraction hooks became advent now a day. In such treatments, consolidation of arches is not done in regular practice. So, the present study is concentrated on effects of consolidation in two implant and three implant combinations of retraction and intrusion. A three-dimensional FEM model of maxillary teeth and periodontal ligament housed in the alveolar bone with the first premolars extracted is generated with appropriate number of elements and nodes. The models were broadly divided into two groups according to the no. of implants. Mini-implants were placed bilaterally between the second premolar and molar at varying heights (7, 10, 13 mm) in group I, and along with bilateral implants, an additional mid-implant is placed between the central incisors as group II. Brackets with 0.022 slot were placed on the teeth, 19 × 25 SS wire is placed in the brackets, an anterior retraction hook was placed at 9 mm height, and analysis was done to evaluate the stresses and displacement patterns in consolidation and non-consolidation models. The results showed that consolidation of the anterior teeth during intrusion and retraction shows various advantages such as less stresses on the bone, PDL, implant, teeth, and no labial flaring of the anterior teeth and three implant system, i.e., two bilateral implant at 10 mm and a mid-implant at 12 mm between the centrals has shown to be better than other models as bodily movement is observed. Consolidation is better than non consolidation during enmasse retraction and intrusion.

Incisor malalignment and the risk of periodontal disease progression.

PubMed

Alsulaiman, Ahmed A; Kaye, Elizabeth; Jones, Judith; Cabral, Howard; Leone, Cataldo; Will, Leslie; Garcia, Raul

2018-04-01

The objective of this study was to investigate the association between incisor crowding, irregularity, and periodontal disease progression in the anterior teeth. Data collected over 35 years from men enrolled in the Veterans Affairs Dental Longitudinal Study included information concerning pocket depth and alveolar bone loss. Plaster casts of the maxillary (n = 400) and mandibular (n = 408) arches were available for baseline measurements. Periodontal disease in the anterior teeth was defined as per arch sum of pathologic pocket depth and sum of teeth with any alveolar bone loss in the anterior sextants. Incisor malalignment status was defined by the anterior tooth size-arch length discrepancy index and Little's Irregularity Index. Adjusted mixed effects linear models computed the beta (β) estimates and 95% confidence intervals (95% CI) of the amounts of change in periodontal disease outcomes by the level of malalignment. In the anterior maxillary arch, crowding and spacing were significantly associated with an increased per-arch sum of pathologic pocket depth (β, 0.70 mm; 95% CI, 0.20-1.21, and β, 0.49 mm; 95% CI, 0.06-0.91, respectively). In the anterior mandibular arch, incisor crowding and irregularity were significantly associated with an increased per-arch sum of pathologic pocket depth (mild crowding: β, 0.47 mm; 95% CI, 0.01-0.93; severe irregularity: β, 0.94 mm; 95% CI, 0.50-1.38), and the sum number of teeth with alveolar bone loss (mild and moderate-to-severe crowding: β, 0.45 teeth; 95% CI, 0.08-0.82; and β, 0.45 teeth; 95% CI, 0.13-0.83, respectively; moderate irregularity: β, 0.34 teeth; 95% CI, 0.06-0.62). Certain incisor malalignment traits (ie, maxillary incisor crowding, maxillary incisor spacing, mandibular incisor mild crowding, mandibular incisor moderate-to-severe crowding, mandibular incisor moderate irregularity, and mandibular incisor severe irregularity) are associated with significant periodontal disease progression. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Esthetic Rehabilitation of the Smile with No-Prep Porcelain Laminates and Partial Veneers

PubMed Central

Farias-Neto, Arcelino; Gomes, Edna Maria da Cunha Ferreira; Sánchez-Ayala, Alfonso; Sánchez-Ayala, Alejandro; Vilanova, Larissa Soares Reis

2015-01-01

Rehabilitation of patients with anterior conoid teeth may present a challenge for the clinician, especially when trying to mimic the nature with composite resins. This clinical report exemplifies how a patient with conoid upper lateral incisors was rehabilitated with minimally invasive adhesive restorations. Following diagnostic wax-up and cosmetic mock-up, no-prep veneers and ceramic fragments (partial veneers) were constructed with feldspathic porcelain. This restorative material presents excellent reproduction of the optical properties of the dental structure, especially at minimal thicknesses. In this paper, the details about the treatment are described. A very pleasing outcome was achieved, confirming that minimally invasive adhesive restorations are an excellent option for situations in which the dental elements are healthy, and can be modified exclusively by adding material and the patient does not want to suffer any wear on the teeth. PMID:26568893

Sex differences in Hadza dental wear patterns : a preliminary report.

PubMed

Berbesque, J Colette; Marlowe, Frank W; Pawn, Ian; Thompson, Peter; Johnson, Guy; Mabulla, Audax

2012-09-01

Among hunter-gatherers, the sharing of male and female foods is often assumed to result in virtually the same diet for males and females. Although food sharing is widespread among the hunting and gathering Hadza of Tanzania, women were observed eating significantly more tubers than men. This study investigates the relationship between patterns of dental wear, diet, and extramasticatory use of teeth among the Hadza. Casts of the upper dentitions were made from molds taken from 126 adults and scored according to the Murphy dental attrition scoring system. Females had significantly greater anterior occlusal wear than males when we controlled for age. Males exhibited greater asymmetry in wear, with greater wear on the left side in canines, first premolars, and first molars. We suggest that these sex differences in wear patterns reflect the differences seen in the diet, as well as in the use of teeth as tools.

Maxillary overlay removable partial dentures for the restoration of worn teeth.

PubMed

Fonseca, Júlio; Nicolau, Pedro; Daher, Tony

2011-04-01

Prolonged tooth maintenance by a more aged population considerably increases the probability of dentists having to treat patients with high levels of tooth wear. Pathological tooth wear, caused primarily by parafunction, seems to be a growing problem that affects a large number of adult patients. The clinical report presents a case of a partially edentulous patient with an elevated degree of wear in the upper jaw caused by attrition and erosion, rehabilitated with a maxillary overlay removable partial denture (ORPD) consisting of a chrome-cobalt (Cr-Co) framework with anterior acrylic resin veneers, posterior cast overlays, and acrylic resin denture bases. Removable partial prosthesis is a treatment alternative when teeth are found to be severely worn or when the patient needs a simple and economical option. Because economics is a conditional factor of the treatment, the clinician should present different treatment alternatives to the patient, in which the overlay prosthesis can be considered.

Treatment considerations for bleaching and bonding white lesions in the anterior dentition.

PubMed

Greenwall, Linda Helene

2009-12-01

White lesions occur commonly on the anterior teeth. There are numerous reasons why these lesions appear in the anterior dentition, and these reasons will be discussed in detail. For some patients, these white lesions may be considered unsightly and the patients may seek treatment to have them removed; other patients are not concerned about their presence on their anterior teeth. Some of the white lesions are caused by demineralization and occur because of poor oral hygiene. For the purpose of this article, developmental white lesions will be discussed in detail, along with the options for treatment of these lesions.

Impact of Untreated Traumatic Injuries to Anterior Teeth on the Oral Health Related Quality of Life As Assessed By Video Based Smiling Patterns in Children

PubMed Central

Golai, Shruti; Patil, Sandya Devi; Baali, Praveen; Kumar, Hemanth

2015-01-01

Introduction The aim of the study was to assess the correlation between the oral health status, oral health related quality of life and the evaluations of their smiles as assessed by the children, their parents, and through measurements of the children’s videotaped smiles and compare the smiling patterns in children suffering from untreated traumatic injuries to anterior teeth and control group. Materials and Methods Fifty eight children of the age 5–15 years of both sexes were selected for the study and categorized into experimental group and control group. The experimental group consisted of 29 children with untreated trauma to one or more anterior teeth while the control group consisted of 29 children with good oral health. Oral examination of all children was done to include in study groups. Children and parents participating in the study responded to two separate Oral Health Related Quality of Life questionnaires for children and parents respectively. The children were asked to watch a funny cartoon show and a video was made while the children watched the show. The video was cropped into still images at 25 predetermined points. Width and openness of the children’s mouth and number of teeth shown were measured during the taped sessions to assess the children’s video–based smiling patterns. Results The children’s self evaluation scores had statistically significant correlation with their smiling patterns, the number of traumatized teeth and the parental assessment of their children’s oral health. Children with trauma to anterior teeth had more impacts on their smiling pattern compared to control group. Conclusion Children suffering from trauma to anterior teeth had more effects on the emotions, the self confidence and social interaction than children without any traumatic injury. PMID:26266209

[Morphological analysis of alveolar bone of anterior mandible in high-angle skeletal class II and class III malocclusions assessed with cone-beam computed tomography].

PubMed

Ma, J; Jiang, J H

2018-02-18

To evaluate the difference of features of alveolar bone support under lower anterior teeth between high-angle adults with skeletal class II malocclusions and high-angle adults presenting skeletal class III malocclusions by using cone-beam computed tomography (CBCT). Patients who had taken the images of CBCT were selected from the Peking University School and Hospital of Stomatology between October 2015 and August 2017. The CBCT archives from 62 high-angle adult cases without orthodontic treatment were divided into two groups based on their sagittal jaw relationships: skeletal class II and skeletal class III. vertical bone level (VBL), alveolar bone area (ABA), and the width of alveolar bone were measured respectively at the 2 mm, 4 mm, 6 mm below the cemento-enamel junction (CEJ) level and at the apical level. After that, independent samples t-tests were conducted for statistical comparisons. The ABA of the mandibular alveolar bone in the area of lower anterior teeth was significantly thinner in the patients of skeletal class III than those of skeletal class II, especially in terms of the apical ABA, total ABA on the labial and lingual sides and the ABA at 6 mm below CEJ level on the lingual side (P<0.05). The thickness of the alveolar bone of mandibular anterior teeth was significantly thinner in the subjects of skeletal class III than those of skeletal class II, especially regarding the apical level on the labial and lingual side and at the level of 4 mm, 6 mm below CEJ level on the lingual side (P<0.05). The ABA and the thickness of the alveolar bone of mandibular anterior teeth were significantly thinner in the group of skeletal class III adult patients with high-angle when compared with the sample of high-angle skeletal class II adult cases. We recommend orthodontists to be more cautious in treatment of high-angle skeletal class III patients, especially pay attention to control the torque of lower anterior teeth during forward and backward movement, in case that the apical root might be absorbed or fenestration happen in the area of lower anterior teeth.

[Efficacy of E-max porcelain laminate veneer on esthetic restoration for anterior teeth over 2 years].

PubMed

Zhang, Ning; Tao, Lin-shuai; Zhang, Xiao-dong

2013-12-01

To evaluate the clinical effect of E-max porcelain laminate veneer on esthetic restoration for anterior teeth over 2 years. E-max porcelain laminate veneer was used in 45 patients with 120 defective anterior teeth. Improved Ryge veneer reexamination standards including the integrity of ceramic veneer, marginal adaptation, gingival health and color match were adopted to evaluate the of clinical effect during 2 years of follow-up. The average satisfaction rate instantly after treatment, 1 year after treatment and 2 years after treatment was 93%, 95% and 94%, respectively. E-max porcelain laminate veneer has fewer side effects, better aesthetics and biological characteristics. The treatment is cost-efficient, safe and long-lasting.

Perceptual distortion of face deletion by local anaesthesia of the human lips and teeth.

PubMed

Türker, Kemal S; Yeo, Purdee L M; Gandevia, Simon C

2005-08-01

As visual guidance of facial movements is impossible, accurate movements for speech and mastication require an established body image that is formed via the information from mechanoreceptors in the skin, mucosa, periodontium, and proprioceptors in the facial and masticatory muscles and in the jaw joints. In this study we aimed to investigate how the acute deafferentation of lips and teeth alters the established image of lips, teeth and the thumb. We used a psychophysical method to determine whether the perceived sizes of the upper lip and front teeth change when the sensory input from the lips and front teeth is fully blocked. We also examined the perceived size of the thumb to test for acute interactions between the thumb and facial structures. Local anaesthetic blocking of upper lip and upper front teeth significantly increased the perceived size of the upper lip by as much as 100% (range 21-100%) in ten out of eleven subjects tested (overall mean 52%; p=0.001). The perceived size of the upper teeth also significantly increased by as much as 155% (range 30-155%) in eight of the eleven subjects during anaesthesia (overall mean 41%; p=0.035). When the region of anaesthesia was increased and both upper and lower teeth and lips were anaesthetised, the perceived size of the upper lip again increased, by 53% (p=0.040), but the change in perceived size of the upper front teeth (18%) was not significant (p=0.206). In both studies there was no change in perceived size of the thumb. The results illustrate the labile central interaction between sensory inputs and the importance of feedback from peripheral afferents in generating the subjective facial image. The timing, level, and area of anaesthesia may be important modifiers of these interactions.

[Alveolar bone thickness and root length changes in the treatment of skeletal Class III patients facilitated by improved corticotomy: a cone-beam CT analysis].

PubMed

Wu, Jiaqi; Jiang, Jiuhui; Xu, Li; Liang, Cheng; Li, Cuiying; Xu, Xiao

2015-04-01

To evaluate the alveolar bone thickness and root length changes of anterior teeth with cone-beam computed tomography (CBCT). CBCT scans were taken for 12 skeletal Class III patients who accepted the improved corticotomy (IC) procedures during pre-surgical orthodontics. The CBCT data in T1 (the maxillary dental arch was aligned and leveled) and T2 (extraction space closure) were superimposed and the alveolar bone thickness at root apex level and root length measurements were done. From T1 to T2, the buccal alveolar bone thickness for the upper lateral incisors increased from (1.89±0.83) to (2.47±1.02) mm (P<0.05), and for central incisors and for canines from (2.32±0.71) to (2.68±1.48) mm and from (2.28±1.08) to (2.41±1.40) mm, respectively. According to Sharpe Grading System, the root resorption grade for 69 teeth of 72 was located in Grade 1, two teeth in Grade 2, one tooth in Grade 3. The improved corticotomy had the potential to increase the buccal alveolar bone thickness and the root resorption in most teeth was in Grade 1 according to Sharpe grading system.

[The influence of breathing mode on the oral cavity].

PubMed

Surtel, Anna; Klepacz, Robert; Wysokińska-Miszczuk, Joanna

2015-12-01

Nose breathing is one of the key factors in the proper development and functioning of the oral cavity. The air passing through the nasal cavity is warmed and humidified while dust and other particulate matter is removed. It is also important as far as bone formation is concerned. The obstruction or congestions of the upper respiratory tract may negatively affect the correct and most optimal (nasal) respiratory tract. The switch from nasal to mouth breathing may lead to serious clinical consequences. Children with the clinical diagnosis of mouth breathing are usually pale, apathetic and they lack concentration and often get tired. Disorders resulting from hypoxy may also be the reason from sleep disturbances, such as frequent waking-up, nocturia, difficulties falling aslee. The main clinical manifestations of mouth breathing appear in the craniofacial structures. Mouth breathers frequently suffer from dental malocclusions and craniofacial bone abnormalities. Chronic muscle tension around the oral cavity could result in the widening of cranio-vertebral angle, posterior position of mandibula and narrow maxillary arch. Among dental alterations the most common are class II malocclusion (total or partial) with the protrusion of the anterior teeth, cross bite (unilateral or bilateral), anterior open bite and primary crowded teeth. Apart from malocclusion, chronic gingivitis, periodontitis, candida infections and halitosis are frequently present in mouth--breathing patients. © 2015 MEDPRESS.

[Clinical study of extraction treatment of Class II division I malocclusion with Empower self-ligating brackets].

PubMed

Chen, Xi-hua; Hua, Yong-mei; Xie, Xing-qian; Yu, Xiao-jia; Wang, Jian; Liu, Li-ming

2013-06-01

To evaluate and compare the treatment efficiency of Empower interactive self-ligating brackets and traditional brackets in Class II division I extraction patients. Forty patients with Class II division I malocclusion were randomly divided into 2 groups. Twenty patients received Empower self-ligating technique (group A) and the other 20 patients received MBT technique (group B). Four first premolars were extracted and without any other anchorage devices added in both groups. The duration of treatment, the number of visits and chair-side time were recorded. Cephalometric analysis was performed before and after treatment. The data was analyzed with SPSS 13.0 software package for paired t test. Treatment time and number of visits in group A were more than in group B, but there was no significant difference between the 2 groups. Chair-side time in group A reduced 151.15s on average compared with group B. Significant changes were observed in both groups after treatment. Upper and lower anterior teeth retracted and convex profile improved.U1-SN, U1-NA, L1-MP, L1-NB, UI-PTV, LI-PTV, UL-EP, LL-EP decreased. Significant differences were found in UM-PTV between the 2 groups(P<0.05). Compared with traditional brackets, Empower self-ligating brackets can save chair-side time, control anterior teeth torque and posterior teeth anchorage effectively, but can not reduce the treatment time or number of visits. Supported by Youth Research Project of Shanghai Municipal Health Bureau(2010Y155).

Orthognathic Surgery and Implant-Supported Bridge in a Class III Patient Injured in a Motor Vehicle Accident.

PubMed

Honda, Koji; Hirota, Makoto; Iwai, Toshinori; Fujita, Koichi; Omura, Susumu; Ono, Takashi; Tohnai, Iwai

2018-05-01

Occlusal and esthetic rehabilitation of jaw deformities in patients with partially edentulous maxilla are challenging procedures. This article describes a patient involving a skeletal Class III, 36-year-old male patient with a single bilateral anterior partially edentulous maxilla resulting from injuries sustained in a motor vehicle accident; his anterior teeth had been lost for more than 10 years. His lip protruded from the lateral view due to the proclined upper incisors and mandibular protrusion.Because of the facial deformity and inadequate prosthesis of the maxilla, the prosthesis had dropped out repeatedly. Bone deficiency was prominent in the area of the anterior maxillary region and required augmentation for implant restoration.Consultation among the prosthodontist, orthodontist, and patient led to a decision to perform an orthognathic surgery and bone graft before implant treatment. After orthodontic treatment combined with orthognathic surgery, 3 dental implants were placed with simultaneous iliac bone graft for prosthetic rehabilitation. The treatment restored the maxillary dental arch, which supported the upper lip with appropriate occlusion, both esthetically and functionally. After a 2-year clinical follow-up, the orthoprosthesis of the maxilla remained stable, and the patient was satisfied with the outcome of treatment. The combination of orthodontic, surgical, and dental implant treatment could be an option for skeletal Class III patients with bone-deficient, edentulous jaws.

Clinical signs and bacterial communities of deciduous necrotic root canals detected by PCR-DGGE analysis: research association.

PubMed

de Paula, Viviane Andrade Cancio; de Carvalho Ferreira, Dennis; Cavalcante, Fernanda Sampaio; do Carmo, Flávia Lima; Rosado, Alexandre Soares; Primo, Laura Guimarães; dos Santos, Kátia Regina Netto

2014-08-01

This study sought to investigate the possible association between clinical and radiographic data of the patients with the bacterial community profiles involved in cases of necrosis in primary root canals. Microbial community profiles for 25 samples from necrotic deciduous root canals were analyzed using the polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) fingerprinting approach. These results were related to the clinical and radiographic data of these patients. The analysis showed a large diversity of microbial communities in necrotic deciduous root canals. The statistical results pointed out that posterior and anterior teeth were associated with <20 bands and >20 bands in PCR-DGGE method, respectively. A relationship was verified between ages >4 years old and posterior teeth and, ages ≤4 years old and anterior teeth. The data showed a polymicrobial community and pointed out the association of age with necrosis in anterior and posterior teeth. Copyright © 2014 Elsevier Ltd. All rights reserved.

Glass Fibre-Reinforced Composite Post and Core Used in Decayed Primary Anterior Teeth: A Case Report

PubMed Central

Verma, Leena; Passi, Sidhi

2011-01-01

Aesthetic requirement of severely mutilated primary anterior teeth in the case of early childhood caries has been a challenge to pediatric dentist. Among restorative treatment options, prefabricated crown and biological and resin composite restoration either by means of direct or indirect technique are mentioned in the literature. This paper presents the clinical sequence of rehabilitation of maxillary anterior primary teeth. Endodontic treatment was followed by the placement of a glass fibre-reinforced composite resin post. The crown reconstruction was done with composite restoration. Resin glass fibre post has best properties in elasticity, translucency, adaptability, tenaciousness, and resistance to traction and to impact. Along with ease of application, fiber can be used as an alternative to traditionally used materials in the management of early childhood caries. PMID:22567447

Multivariate analyses reveal a new assemblage of diverse and small archosauriforms (Reptilia, Diapsida) from the Upper Triassic of India

NASA Astrophysics Data System (ADS)

Shafi Bhat, Mohd; Ray, Sanghamitra; Mohan Datta, Pradipendra

2017-04-01

The study is based on a large collection of vertebrate microfossils collected from the Upper Triassic Tiki Formation of the Rewa Gondwana basin of India, which is a mud-dominated fluvial succession. About 8600 kg of mudrocks from the Tiki Formation were screen washed to yield 1865 vertebrate microfossils, of which 67% are isolated teeth. Of these, there are about 450 well-preserved teeth, which are leaf-shaped, slightly recurved and have subtriangular crowns with expanded and asymmetric bases, and distinct denticles both on the posterior or anterior carinae. The morphology of these teeth suggests that these belong to Archosauriformes (Heckert, 2004; Irmis et al., 2007). Since the teeth were found isolated, without being associated with any other skeletal elements, it is not possible to ascertain their taxonomic position up to the generic and species level. However, based on their distinct dental attributes, twelve morphotypes are identified, of which five show similarity with the teeth of the basal saurischian dinosaurs. Principal Component and Canonical Variate analyses (PCA and CVA) are performed on these isolated teeth to evaluate the differentiation of the specimens based on the variance of their variables and to assess the consistency of identification by qualitative and quantitative methods (Hammer and Harper, 2006). PCA and CVA are applied to the variance-covariance matrix of the logarithmically transformed variables, the latter including six measured dimensions characterizing the different crown proportions. Since the first three principal components (PCs) account for more than 98% of the total variance, PC4 is discarded. Principal component scores are plotted on PC 1 and PC 2, and PC 2 and PC 3 to show the scatter of the archosauriform teeth examined. Although distinct clustering of specimens belonging to the different morphotypes is seen, there is considerable overlapping as represented by the convex hull polygons. The quantitative analyses show that many of the teeth collected from the Tiki Formation are similar to that of other known Late Triassic archosauriforms such as Protecovasaurus, Revueltosaurus, Pekinosaurus and Crosbysaurus Although more analyses are required for precise taxonomic identification, the current study highlights a large array of Late Triassic archosauriforms from India, which so far remained unknown. References: Hammer, O., Harper, D.A.T. 2006. Paleontological data analysis. Blackwell Publishing, Ltd., Malden, USA. Heckert, A.B. 2004. Late Triassic microvertebrates from the Upper Triassic Chinle Group (Otischalkian-Adamanian: Carnian), southwestern U.S.A.: New Mexico Museum of Natural History and Science Bulletin 27:1-170. Irmis, R.B., Parker, W.G., Nesbitt, S.J., Liu, J. 2007. Early ornithischian dinosaurs: the Triassic record. Historical Biology 19: 3-22.

Interleukin-1 and IL-1 receptor antagonist in gingival crevicular fluid.

PubMed

Rawlinson, A; Dalati, M H; Rahman, S; Walsh, T F; Fairclough, A L

2000-10-01

This study aimed to investigate the cytokine IL-1beta and its receptor antagonist IL-1ra in gingival crevicular fluid (GCF), in patients with adult periodontitis. A total of 40 GCF samples were harvested from 10 subjects with moderate to severe adult periodontitis and 10 healthy controls. Subjects were selected from both genders, with all the upper anterior teeth present, and with no relevant systemic illness, pregnancy or recent medication. All subjects were non-smokers and had not received any periodontal therapy within the preceding 3 months. Deep bleeding sites, deep non-bleeding sites and healthy sites were investigated in relation to upper anterior teeth. Clinical measurements were recorded for each site, after obtaining a GCF sample. IL-1beta and IL-1ra were quantified using new commercially available ELISA kits (Quantikine), and could be detected in all samples. The mean concentration for IL-1beta was 0.11 (SD 0.14) pg/microl for bleeding periodontitis sites, 0.04 (0.05) pg/microl for non-bleeding periodontitis sites, and 0.01 (0.03) pg/microl for healthy sites (p<0.001). In contrast, the mean concentration for IL-1ra was 6.99 (9.78) pg/microl for healthy sites, 0.59 (0.44) pg/microl for non-bleeding periodontitis sites, and 0.44 (0.36) pg/microl for bleeding periodontitis sites (p<0.001, except for comparisons between bleeding and non-bleeding periodontitis sites, p>0.05). For healthy sites, a strong inverse relationship was found between IL-1beta and IL-1ra levels in GCE. The results suggest a strong relationship between the severity of adult periodontitis and the increasing GCF levels of IL-1beta and decreasing levels of IL-1ra.

Tooth angulation and dental arch perimeter-the effect of orthodontic bracket prescription.

PubMed

Pontes, Luana F; Cecim, Rodolpho L; Machado, Sissy M; Normando, David

2015-08-01

The aim of this study was to evaluate the effects of upper incisors and canine angulations introduced by different bracket prescriptions on dental arch perimeter. Cone beam computerized tomography scans collected using I-Cat (Imaging Sciences International, Hatfield, PA, USA) were selected conveniently from a database of routine exams of a clinical radiology center. Crown and radicular measurements of upper incisors and canines were made and exported to the Autocad 2011 software to create a virtual dental model. The virtual teeth were positioned with an angulation of zero; thereafter, a reference value for the perimeter of the arch was measured. Furthermore, teeth angulations were applied according to the standards of the Edgewise bracket system and the Straight-wire systems: MBT, Capelozza, Andrews, and Roth. The largest linear distances for tooth crown (anterior arch perimeter) and root (radicular distance) were obtained for each bracket prescription. The anterior perimeter for well-aligned incisors and canines without angulation was used as reference (crown: 47.34mm; root: 39.13mm). An increase in the arch perimeter was obtained for all bracket prescriptions evaluated, which ranged from 0.28 and 3.19mm in the Edgewise technique, for the crown and root measurements, respectively, to 1.09 and 11.28mm for the Roth prescription. Bracket prescriptions with greater angulation led to an increased use of space within the dental arch, mainly in the radicular region. The consequence of this radicular angular displacement will need to be further investigated. © The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Partial tooth gear bearings

NASA Technical Reports Server (NTRS)

Vranish, John M. (Inventor)

2010-01-01

A partial gear bearing including an upper half, comprising peak partial teeth, and a lower, or bottom, half, comprising valley partial teeth. The upper half also has an integrated roller section between each of the peak partial teeth with a radius equal to the gear pitch radius of the radially outwardly extending peak partial teeth. Conversely, the lower half has an integrated roller section between each of the valley half teeth with a radius also equal to the gear pitch radius of the peak partial teeth. The valley partial teeth extend radially inwardly from its roller section. The peak and valley partial teeth are exactly out of phase with each other, as are the roller sections of the upper and lower halves. Essentially, the end roller bearing of the typical gear bearing has been integrated into the normal gear tooth pattern.

Prevalence of Traumatic Dental Injuries to Anterior Teeth of 12-Year-Old School Children in Kashmir, India.

PubMed

Ain, Tasneem S; Lingesha Telgi, Ravishankar; Sultan, Saima; Tangade, Pradeep; Ravishankar Telgi, Chaitra; Tirth, Amit; Kumar Pal, Sumit; Gowhar, Owais; Tandon, Vaibhav

2016-03-01

Traumatic dental injuries to anterior teeth are a significant public health problem, not only because their prevalence is relatively high, but also because they have considerable impact on children's daily lives. Traumatic dental injuries (TDIs) cause physical and psychological discomfort, pain and other negative impacts, such as tendency to avoid laughing or smiling, which can affect social relationships. This study aimed to assess the prevalence of traumatic dental injuries to anterior teeth among 12-year-old school children in Kashmir, India. A cross-sectional study was conducted in private and government schools of India among 1600 schoolchildren aged 12 years. In addition to recording of the type of trauma (using Ellis and Davey classification of fractures, 1970), over jet, Angle's molar relation and lip competence were also recorded. The socioeconomic status and academic performance of the study subjects were registered. The data obtained were compiled systematically and then statistically analyzed. The statistical significance for the association between the traumatic injury and the variables was analyzed using the chi-square test. Logistic regression was used to identify potential risk predictors of TDIs. The overall prevalence of TDI to anterior teeth was found to be 9.3%. The TDI to anterior teeth in male was more than female, but the difference was statistically nonsignificant (P < 0.01). Falls and sports were the most common causes of trauma in the present study. The highest potential risk factor for the occurrence of trauma was over jet. Academic performance was found to be significantly associated to TDI to anterior teeth, when analyzed in a multiple regression model. It was concluded that the prevalence of traumatic dental injuries was 9.3%. Traumatic dental injuries among children exhibit complex interaction between the victims' oral conditions and their behavior. Therefore, prevention should consider a number of characteristics such as oral predisposing factors, environmental determinants and human behavior. It is recommended that specific and proper public places for leisure and sports activities, with impact-absorbing surfaces around the items on which children are most likely to fall, should be provided.

Extreme skeletal open bite correction with vertical elastics.

PubMed

Cruz-Escalante, Marco Antonio; Aliaga-Del Castillo, Aron; Soldevilla, Luciano; Janson, Guilherme; Yatabe, Marilia; Zuazola, Ricardo Voss

2017-11-01

Severe skeletal open bites may be ideally treated with a combined surgical-orthodontic approach. Alternatively, compensations may be planned to camouflage the malocclusion with orthodontics alone. This case report describes the treatment of an 18-year-old man who presented with a severe open bite involving the anterior and posterior teeth up to the first molars, increased vertical dimension, bilateral Class III molar relationship, bilateral posterior crossbite, dental midline deviation, and absence of the maxillary right canine and the mandibular left first premolar. A treatment plan including the extraction of the mandibular right first premolar and based on uprighting and vertical control of the posterior teeth, combined with extrusion of the anterior teeth using multiloop edgewise archwire mechanics and elastics was chosen. After 6 months of alignment and 2 months of multiloop edgewise archwire mechanics, the open bite was significantly reduced. After 24 months of treatment, anterior teeth extrusion, posterior teeth intrusion, and counterclockwise mandibular rotation were accomplished. Satisfactory improvement of the overbite, overjet, sagittal malocclusion, and facial appearance were achieved. The mechanics used in this clinical case demonstrated good and stable results for open-bite correction at the 2-year posttreatment follow-up.

Periodontal Flap Surgery along with Vestibular Deepening with Diode Laser to Increase Attached Gingiva in Lower Anterior Teeth: A Prospective Clinical Study

PubMed Central

Bhardwaj, Ashu; Jafri, Zeba; Sultan, Nishat; Sawai, Madhuri; Daing, Anika

2018-01-01

Background: Chronic periodontitis in lower anterior teeth results in rapidly progressive gingival recession (GR), loss of alveolar bone, decreased vestibular depth (VD) with consequential tooth mobility, and tooth loss. Treatment option for such cases in this esthetically important area of the oral cavity includes extraction followed by implants for which sufficient bone height and mucogingival complex are a prerequisite. Henceforth, an attempt was made to prolong the life of lower anterior teeth and postpone the need for implants by the treatment of chronic periodontitis with periodontal flap surgery followed by vestibular deepening in single surgical procedure. Materials and Methods: In this clinical, prospective study, conventional periodontal flap surgery was done on 74 sites in lower anterior teeth in 16 patients with attachment loss >5 mm due to chronic periodontitis. Vestibular deepening with diode laser at (wavelength - 810 nm, output power: 0.5–7 W, continuous wave, contact mode) was done after suturing the flap. All the clinical parameters: GR, pocket depth (PD), clinical attachment loss (CAL), width of keratinized gingiva, width of attached gingiva, and VD were assessed preoperatively after Phase I therapy and 6 months postoperatively. Results: At all the 74 sites, there was highly significant gain in attached gingiva, keratinized gingiva, and VD (P ≤ 0.001). Highly significant reduction in PD (P ≤ 00.001), significant reduction in attachment loss (P ≤ 0.01) but no significant reduction in GR (P = 0.897) was observed. Conclusions: The combination of periodontal flap surgery with vestibular deepening with diode laser may be a suitable cost-effective treatment option to prolong the life of periodontally involved lower anterior teeth. The surgical technique can postpone the need for extraction of teeth along with all the intangible benefits of periodontal therapy. PMID:29456397

A 57-year follow-up study of occlusion. Part 3: Oral health and attitudes to teeth among individuals with crossbite at the age of 8 years.

PubMed

Berg, Rolf Elling; Espeland, Lisen; Stenvik, Arild

2008-11-01

To analyze occlusal changes occurring between the ages of 8 and 65 years in persons with anterior and/or posterior crossbite at the age of 8; to examine their attitudes toward dental appearance and their experiences related to their own teeth. Of the 81 people we contacted who had been documented as having crossbite as 8-year-olds in 1950, 21 agreed to participate in this follow-up study. Their occlusal conditions had been documented initially by intraoral photographs in 1950, and a clinical examination including facial photographs, further occlusal photographs and an interview took place in 2007. For comparison, we also had available similarly-documented examples of individuals (n = 18) of the same age and with normal occlusion in 1950. Oral hygiene was good or excellent in all individuals and all but one visited their dentist regularly. The average number of missing teeth was 3.8, whereas in the normal occlusion sample that number was 1.6. Of the eight persons who had undergone minor orthodontic treatment during childhood, five had an anterior crossbite resolved. Four persons who had initially presented a posterior crossbite later developed an anterior crossbite as well. In 2007, eleven individuals had a posterior and eight an anterior crossbite. At 65, four persons remembered that they had been teased in childhood because of their teeth, and could still remember the terms that had been used. Eighteen persons were satisfied with their teeth although two had severe anterior crossbite; three were dissatisfied, and their reasons were general health problems, mild crowding, and dentofacial asymmetry. Seven persons had TMJ symptoms with various types of history. With three exceptions, they all considered good tooth position to be important or very important. In those not orthodontically treated, malocclusion tended to worsen, although 18 of the 21 persons expressed satisfaction with their teeth as adults. They had a higher average number of missing teeth, and more had TMJ problems than the control group with normal occlusion.

Occlusal tooth wear in the general population of Germany: effects of age, sex, and location of teeth.

PubMed

Schierz, Oliver; Dommel, Sandra; Hirsch, Christian; Reissmann, Daniel R

2014-09-01

Tooth wear is an increasing problem in a society where people are living longer. The purpose of this study was to assess the effect of age, sex, and location of teeth on the severity of tooth wear and to determine the prevalence of dentin exposure in the general population of Germany. Tooth wear was measured in casts of both jaws of 836 persons with a 6-point (0-5) ordinal rating scale. Linear random-intercept regression models with the covariates of age, sex, jaw, and tooth group (with the participant as a grouping variable) were computed to determine the association of these covariates with tooth wear of a single tooth. The mean tooth wear score across all age groups, both sexes, and all teeth was 2.9 (standard deviation, 0.8), and the prevalence of teeth with exposed dentin was 23.4%. The participants' age was correlated with the mean tooth wear scores (r=0.51). The tooth wear level among women was on average 0.15 units lower than among men, and tooth wear was on average 0.59 units higher for anterior teeth than for posterior teeth. Increased tooth wear in anterior teeth may be due to the initially predominant guidance by anterior teeth, with age-related linear progress in tooth wear. Occlusal tooth wear scores and dentin exposure increase with age. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Histogenesis and disappearance of the teeth of the Mekong giant catfish, Pangasianodon gigas (Teleostei).

PubMed

Kakizawa, Yoshiko; Meenakarn, Wanpen

2003-12-01

Juveniles of the Mekong giant catfish, Pangasianodon gigas (Teleostei), have 3 sorts of tooth-upper and lower jaw teeth, palatal teeth, and pharyngeal teeth--but adults are toothless. To investigate the histogenesis and disappearance of the teeth, we made serial sections of the mouth and teeth of juvenile fish at 10 developmental stages (from ca. 8.5 to ca. 30 cm in total length) and examined them under scanning electron microscope and light microscope. Observations of teeth and surrounding tissues in the serial sections revealed the process of tooth resorption by active odontoclast-like cells. Numbers of jaw and palatal teeth decreased with age. When the fish reached ca. 14 cm in total length, the numbers of functional upper jaw teeth and successional tooth germs decreased rapidly, and the developmental rate of successional tooth germs slowed. When the fish reached ca. 24 cm, no teeth existed in the upper jaw. It is clear that tooth disappearance results from the shedding of functional teeth and the lack of replacement tooth germs.

Alveolar Bone Housing- A Modified Wilkodontics Approach- A Case Report

PubMed Central

Sanjay, Kothamachu; Bhongade, ML; Shrivastav, Sunita

2016-01-01

Accelerated orthodontic treatment is the need of the hour in current scenario as the conventional orthodontics is time taking. Corticotomy assisted orthodontics have been used for years to reduce the treatment duration by reducing the resistance provided by alveolar bone housing. This case report describes the orthodontic treatment combined with the modification in conventional wilkodontic technique in a patient to accelerate tooth movement and shorten the treatment time with an anterior open bite and flared and spaced upper and lower incisors. Firstly plaque control was achieved with supra and subgingival scaling. A modified approach using periodontal access flap followed by vertical bone cuts in the cortical bone from the crest of the alveolar bone margin to 2mm-3mm below the apices of all the anterior teeth extending from upper left canine to upper right canine were performed. These vertical cuts were joined by horizontal cuts apically and flap repositioned. An MBT 0.018 inch appliance was bonded. Orthodontic therapy proceeded with frequent activation of the appliances to retract the incisors every two weeks. The total treatment time was four and half months with active period of two months and no adverse effects were observed at the end of active treatment. The modified decortication technique reduced the treatment time to a considerable extent. The interdental spacing closed and optimum overjet and overbite was achieved. PMID:27656577

Maxillary anterior en masse retraction using different antero-posterior position of mini screw: a 3D finite element study.

PubMed

Hedayati, Zohreh; Shomali, Mehrdad

2016-12-01

Nowadays, mini screws are used in orthodontic tooth movement to obtain maximum or absolute anchorage. They have gained popularity among orthodontists for en masse retraction of anterior teeth after first premolar extraction in maximum anchorage cases. The purpose of this study was to determine the type of anterior tooth movement during the time when force was applied from different mini screw placements to the anterior power arm with various heights. A finite element method was used for modeling maxillary teeth and bone structure. Brackets, wire, and hooks were also designed for modeling. Two appropriate positions for mini screw in the mesial and distal of the second premolar were designed as fixed nodes. Forces were applied from the mini screw to four different levels of anterior hook height: 0, 3, 6, and 9 mm. Initial tooth movement in eight different conditions was analyzed and calculated with ANSYS software. Rotation of anterior dentition was decreased with a longer anterior power arm and the mesial placement of the mini screw. Bodily movements occurred with the 9-mm height of the power arm in both mini screw positions. Intrusion or extrusion of the anterior teeth segment depended on the level of the mini screw and the edge of the power arm on the Z axis. According to the findings of this study, the best control in the sagittal plane during anterior en masse retraction was achieved by mesial placement of the mini screw and the 9-mm height of the anterior power arm. Where control in the vertical plane was concerned, distal placement of the mini screw with the 6-mm power arm height had minimum adverse effect on anterior dentition.

Outcomes and stability in patients with anterior open bite and long anterior face height treated with temporary anchorage devices and a maxillary intrusion splint

PubMed Central

Scheffler, Nicole R.; Proffit, William R.; Phillips, Ceib

2015-01-01

Introduction Temporary skeletal anchorage devices now offer the possibility of closing anterior open bites and decreasing anterior face height by intruding maxillary posterior teeth, but data for treatment outcomes are lacking. This article presents outcomes and posttreatment changes for consecutive patients treated with a standardized technique. Methods The sample included 33 consecutive patients who had intrusion of maxillary posterior teeth with a maxillary occlusal splint and nickel-titanium coil springs to temporary anchorage devices in the zygomatic buttress area, buccal and apical to the maxillary molars. Of this group, 30 had adequate cephalograms available for the period of treatment, 27 had cephalograms including 1-year posttreatment, and 25 had cephalograms from 2 years or longer. Results During splint therapy, the mean molar intrusion was 2.3 mm. The mean decrease in anterior face height was 1.6 mm, less than expected because of a 0.6-mm mean eruption of the mandibular molars. During the postintrusion orthodontics, the mean change in maxillary molar position was a 0.2-mm extrusion, and there was a mean 0.5-mm increase in face height. Positive overbite was maintained in all patients, with a slight elongation (<2 mm) of the incisors contributing to this. During the 1 year of posttreatment retention, the mean changes were a further eruption of 0.5 mm of the maxillary molars, whereas the mandibular molars intruded by 0.6 mm, and there was a small decrease in anterior face height. Changes beyond 1 year posttreatment were small and attributable to growth rather than relapse in tooth positions. Conclusions Intrusion of the maxillary posterior teeth can give satisfactory correction of moderately severe anterior open bites, but 0.5 to 1.5 mm of reeruption of these teeth is likely to occur. Controlling the vertical position of the mandibular molars so that they do not erupt as the maxillary teeth are intruded is important in obtaining a decrease in face height. PMID:25439210

Comparison of anchorage capacity between implant and headgear during anterior segment retraction.

PubMed

Li, F; Hu, H K; Chen, J W; Liu, Z P; Li, G F; He, S S; Zou, S J; Ye, Q S

2011-09-01

To compare the anchorage effects of the implants and the headgear for patients with anterior teeth retraction in terms of incisor retraction, anchorage loss, inclination of maxillary incisors, positional change of maxillary basal bone, and treatment duration. An electronic search for relative randomized controlled trials (RCTs) prospective and retrospective controlled trials was done through the Cochrane Central Register of Controlled Trials (CENTRAL), PubMed, Embase, Medline, and CNKI, regardless of language of study. Study selection, methodological quality assessment, and data extraction were performed by two reviewers independently. Meta-analysis was performed when possible; otherwise descriptive assessment was done. The search yielded 35 articles, of which eight met the inclusion criteria and were categorized into five groups according to types of intervention. For the midpalatal implant, the anchorage loss was much less than for the headgear group, with insignificant differences in terms of anterior teeth retraction, maxillary incisor inclination, positional change of basal bone, and treatment duration. For the mini-implant, greater anterior teeth retraction and less anchorage loss were demonstrated, with inconsistent results for the other measures. For the onplant, less anchorage loss was noted, with insignificant differences for the other measures. The skeletal anchorage of the midpalatal implant, mini-implant, and onplant offer better alternatives to headgear, with less anchorage loss and more anterior teeth retraction. There were inconsistent results from the included studies in terms of maxillary incisor inclination, positional change of maxillary basal bone, and treatment duration. More qualified RCTs are required to provide clear recommendations.

The psychosocial impacts of implantation on the dental aesthetics of missing anterior teeth patients.

PubMed

Chen, P; Yu, S; Zhu, G

2012-12-01

The aim of the current study was to investigate the psychosocial impact of dental aesthetics among patients who received anterior implant-supported prostheses. The current study is a cross-sectional evaluation involving 115 individuals who had gone through treatment at the dental clinics of general hospitals. Participants completed the Chinese version of the psychosocial impact of dental aesthetics questionnaire (PIDAQ) before implantation and six months after crown restoration. Basic demographic information was recorded. Six months after implant crown restoration, participants were asked to self-assess their own oral aesthetics compared to before implantation. A total of 106 patients completed the study. PIDAQ scores correlated significantly with the self-assessment of the degree of oral aesthetics. Six months after crown restoration, the two factors (social impact and aesthetic attitude) decreased and the dental self-confidence score increased significantly compared to pre-implantation scores. Gender and education level significantly affected PIDAQ. Anterior implant-supported prostheses significantly affected the patients' psychosocial perception. Implantation of missing anterior teeth can significantly improve patients' negative psychosocial impact of dental aesthetics. Gender and education level are correlated with the degree of improvement. The PIDAQ can be used in assessing the psychosocial effects of implantation in missing anterior teeth.

Post-Obturation pain following one-visit and two-visit root canal treatment in necrotic anterior teeth.

PubMed

Rao, K Nandan; Kandaswamy, Raghavendra; Umashetty, Girish; Rathore, Vishnu Pratap Singh; Hotkar, Chetan; Patil, Basanagouda S

2014-04-01

To investigate and compare the post-obturation pain after one-visit and two-visit root canal treatment in non-vital anterior teeth. One hundred forty eight patients requiring root canal therapy on permanent anterior non-vital teeth with single root were included in this study. Patients were randomly assigned to either the one-appointment or the twoappointment group. The standardized protocol for all the teeth involved local anesthesia, isolation and access, engine-driven rotary nickel-titanium canal instrumentation with 2.5% NaOCl irrigation and obturation. Teeth in group 1 (n = 74) were obturated during the first appointment by using laterally condensed gutta-percha and resin sealer. Teeth in group 2 (n = 74) were given closed dressing and were obturated during the second appointment, 7 to 14 days later. A modified Visual Analogue Scale was used to measure pain after 6 hours, 24 hours, 48 hours and 7 days after the treatment. Statistical analysis was done to compare groups at each interval by using an independent-samples t test. The incidence and intensity of post-obturation pain in both Group 'A' and Group 'B' gradually reduced over the study period. When the incidence of pain was compared in the single and two visit group, it was found that the single-visit group experienced slightly less pain than the two-visit group during all study intervals, but the difference found was not statistically significant. There was no difference in postoperative pain between patients treated in only one appointment and patients treated in two appointments. The majority of patients in both groups reported no pain or only minimal pain after 7 days of treatment. How to cite the article: Rao KN, Kandaswamy R, Umashetty G, Rathore VP, Hotkar C, Patil BS. Post-Obturation pain following one-visit and two-visit root canal treatment in necrotic anterior teeth. J Int Oral Health 2014;6(2):28-32.

Selective removal of esthetic composite restorations with spectral guided laser ablation

NASA Astrophysics Data System (ADS)

Yi, Ivana; Chan, Kenneth H.; Tsuji, Grant H.; Staninec, Michal; Darling, Cynthia L.; Fried, Daniel

2016-02-01

Dental composites are used for a wide range of applications such as fillings for cavities, adhesives for orthodontic brackets, and closure of gaps (diastemas) between teeth by esthetic bonding. Anterior restorations are used to replace missing, diseased and unsightly tooth structure for both appearance and function. When these restorations must be replaced, they are difficult to remove mechanically without causing excessive removal or damage to enamel because dental composites are color matched to teeth. Previous studies have shown that CO2 lasers have high ablation selectivity and are well suited for removal of composite on occlusal surfaces while minimizing healthy tissue loss. A spectral feedback guidance system may be used to discriminate between dental composite and dental hard tissue for selective ablation of composite material. The removal of composite restorations filling diastemas is more challenging due to the esthetic concern for anterior teeth. The objective of this study is to determine if composite spanning a diastema between anterior teeth can be removed by spectral guided laser ablation at clinically relevant rates with minimal damage to peripheral healthy tissue and with higher selectivity than a high speed dental handpiece.

[Influence of ambient light and adjacent tooth in anterior tooth color measurement].

PubMed

Wang, Si-qian; Sean, S Lee; Wu, Zhang; Li, Yiming; Ma, Jian-feng

2007-10-01

To investigate the influence of different intensity and directions of ambient light and adjacent tooth in anterior tooth color measurement by using colorimeter. Fiber lite MI-150 was used as ambient illuminant and it irradiated from three or twelve o'clock direction through 45 degrees angle above. The light magnitude 0, 50, 75, 100, 125, 150 W were applied in this experiment. The values of CIE L* a* b* were measured by Minolta Chroma meter CR-321 colorimeter on the center labial surface of ten extracted human maxillary central incisors with or without adjacent teeth, then those data were analyzed statistically by using SPSS 11.5. Neither different intensities nor different directions of ambient light could influence the results of color measurement by using Minolta Chroma meter CR-321 colorimeter, so did the adjacent teeth whether those were exist or not. There is no influence of ambient light and adjacent teeth in the color measurement of anterior teeth under this experiment condition, and Minolta Chroma meter CR-321 colorimeter can be used to measure the color directly aside the chair with light.

Providing a harmonious smile with laminate veneers for a patient with peg-shaped lateral incisors

PubMed Central

Alberton, Simone Beatriz; Alberton, Victória; de Carvalho, Rodrigo Varella

2017-01-01

The most common discrepancy concerning tooth size is the presence of peg-shaped lateral incisors, which can cause teeth with reduced size, anterior diastema, and consequently an unpleasant smile. The development of the adhesive dentistry and ceramic veneers allowed all ceramic-bonded restorations to become an esthetic and functional approach to reestablish the smile harmony. The purpose of this clinical report is to describe a conservative treatment approach to recover an esthetic disharmony caused by bilateral peg-shaped lateral incisors. A 30-year-old female patient was seeking treatment to solve an esthetic disharmony of her smile. Lithium disilicate veneers were planned and build-up with the help of diagnostic models, wax-up, mock-up, and silicone guides, to restore the morphology, size, function, and esthetic of upper lateral incisors and smile. The lithium disilicate veneers were able to provide the harmonization of the patient's smile, recovering the teeth size, shape, and anatomic characteristics. PMID:29279628

Providing a harmonious smile with laminate veneers for a patient with peg-shaped lateral incisors.

PubMed

Alberton, Simone Beatriz; Alberton, Victória; de Carvalho, Rodrigo Varella

2017-01-01

The most common discrepancy concerning tooth size is the presence of peg-shaped lateral incisors, which can cause teeth with reduced size, anterior diastema, and consequently an unpleasant smile. The development of the adhesive dentistry and ceramic veneers allowed all ceramic-bonded restorations to become an esthetic and functional approach to reestablish the smile harmony. The purpose of this clinical report is to describe a conservative treatment approach to recover an esthetic disharmony caused by bilateral peg-shaped lateral incisors. A 30-year-old female patient was seeking treatment to solve an esthetic disharmony of her smile. Lithium disilicate veneers were planned and build-up with the help of diagnostic models, wax-up, mock-up, and silicone guides, to restore the morphology, size, function, and esthetic of upper lateral incisors and smile. The lithium disilicate veneers were able to provide the harmonization of the patient's smile, recovering the teeth size, shape, and anatomic characteristics.

[Finite element analysis of different load mode on tooth movement for space closure in patient with bimaxillary protrusion].

PubMed

Zhang, X B; Yin, Y F; Yao, H M; Han, Y H; Wang, N; Ge, Z L

2016-07-01

To investigate the stress distribution on the maxillary anterior teeth retracted with sliding mechanics and micro-implant anchorage using different retraction hook heights and positions. DICOM image data including maxilla and upper teeth were obtained with cone-beam CT. The three-dimensional finite element model was constructed using Mimics software. Brackets and archwire model were constructed using Creo software. The models were instantiated using Pro/Engineer software. Abaqus software was used to simulate the sliding mechanics by loading 2 N force on 0, 2, 4, 6, 8, 10 mm retraction hooks and three different positions, repectively. Rotation of the occlusal plane, the initial displacement and stress distribution of teeth were analyzed. Lingual rotation of maxillary central incisor(0.021°), gingival movement of the maxillary first molar(0.005 mm), and clockwise rotation of the maxillary occlusal plane(0.012°) were observed when the force application point located at the archwire level (0 mm). In contrast, 0.235° labial rotation of the maxillary central incisor, 0.015 mm occlusal movement of the maxillary first molar, and 0.075° anti-clockwise rotation of the maxillary occlusal plane were observed when the force application point located at the higher level(10 mm retraction hook). The more the force application point was located posteriorly at the archwire level, the less lingual rotation of the maxillary central incisor and the more buccal displacement of maxillary first molar was observed. Maxillary anterior tooth rotation and retraction, vertical displacement of posterior segment, and rotation of the occlusal plane could be controlled by adjusting the height and position of the retraction hook in space closure using miniscrew and sliding mechanics.

Bone-breaking bite force of Basilosaurus isis (Mammalia, Cetacea) from the late Eocene of Egypt estimated by finite element analysis.

PubMed

Snively, Eric; Fahlke, Julia M; Welsh, Robert C

2015-01-01

Bite marks suggest that the late Eocence archaeocete whale Basilosaurus isis (Birket Qarun Formation, Egypt) fed upon juveniles of the contemporary basilosaurid Dorudon atrox. Finite element analysis (FEA) of a nearly complete adult cranium of B. isis enables estimates of its bite force and tests the animal's capabilities for crushing bone. Two loadcases reflect different biting scenarios: 1) an intitial closing phase, with all adductors active and a full condylar reaction force; and 2) a shearing phase, with the posterior temporalis active and minimized condylar force. The latter is considered probable when the jaws were nearly closed because the preserved jaws do not articulate as the molariform teeth come into occulusion. Reaction forces with all muscles active indicate that B. isis maintained relatively greater bite force anteriorly than seen in large crocodilians, and exerted a maximum bite force of at least 16,400 N at its upper P3. Under the shearing scenario with minimized condylar forces, tooth reaction forces could exceed 20,000 N despite lower magnitudes of muscle force. These bite forces at the teeth are consistent with bone indentations on Dorudon crania, reatract-and-shear hypotheses of Basilosaurus bite function, and seizure of prey by anterior teeth as proposed for other archaeocetes. The whale's bite forces match those estimated for pliosaurus when skull lengths are equalized, suggesting similar tradeoffs of bite function and hydrodynamics. Reaction forces in B. isis were lower than maxima estimated for large crocodylians and carnivorous dinosaurs. However, comparison of force estimates from FEA and regression data indicate that B. isis exerted the largest bite forces yet estimated for any mammal, and greater force than expected from its skull width. Cephalic feeding biomechanics of Basilosaurus isis are thus consistent with habitual predation.

[Esthetic reconstruction of the anterior teeth area following a combined periodontic-orthodontic treatment in adult periodontal patients].

PubMed

Lihong, Zhu; Sa, Li; Fei, He; Yong, Wu; Yan, Zhou; Nianhong, Qin; Yi, Ding

2014-10-01

To evaluate the role of the combined periodontic-orthodontic treatment in the esthetic reconstruc- tion of the anterior teeth area following periodontitis. Thirteen adult patients with anterior teeth displacements were treated. The probing pocket depth (PD; 102 teeth, 612 sites), bleeding on probing (102 teeth, 204 sites), papilla index (PI; 128 papillae), and papillary height (PH; 128 papillae) of each patient were assessed at baseline, 3 months after the initial therapy, and the end of the orthodontic treatment. Non-parametric and paired-sample t tests were carried out for the statistical analysis of the data. Three months after initial therapy, the sites with PD ≤ 3 mm accounted for 79.58% (487/612) of the observed teeth, and 88.73% (181/204) of the buccal and lingual sites of the teeth showed negative bleeding on probing. These findings were better than those at baseline [26.31% (161/612) and 22.06% (45/204), respectively] (P < 0.05), but no sig- nificant difference was observed compared with pro-orthodontic treatment (P > 0.05). Prior to orthodontic treatment, the levels of the PI of 8 and 21 papillae were III and II, respectively, among the 128 observed papillae. After the orthodontic treatment, 51 papillae were at level III and 68 papillae were at level II. The PH of the 102 papillae was 2.84 mm ± 0.62 mm after ortho- dontic treatment. This result indicated significant difference compared with that of pre-orthodontic treatment (1.69 mm ± 0.57 mm) (P < 0.05). After initial therapy, moderate orthodontic teeth movements may reconstruct the interproximal soft tissue, with esthetic improvement of the papillary level and resolution of the periodontal defects.

[Collaboration from periodontics in the aesthetic restoration of anterior teeth].

PubMed

Qintao, Wang; Yumei, Zhang

2017-10-01

Anterior teeth are the main zones that reflect oral aesthetics. The histological structure, outside appearance, relative ratios, and other characteristics of tissues must be understood to obtain relatively ideal and natural restoration effects. A collaboration of different disciplines must be implemented to obtain harmonious and stable restoration outcomes that help the majority appreciate beauty. This article aims to discuss the role of periodontics in this collaboration and introduce several common techniques.

Use of a Piezosurgery Technique to Remove a Deeply Impacted Supernumerary Tooth in the Anterior Maxilla

PubMed Central

Sukegawa, Shintaro; Kanno, Takahiro; Kawakami, Kiyokazu; Shibata, Akane; Takahashi, Yuka; Furuki, Yoshihiko

2015-01-01

Deeply impacted supernumerary teeth in the anterior maxillary cannot be generally removed by the conventional labial or palatal surgical approach because of the risk of damaging the surrounding soft tissues and the possibility of injuring the roots of adjacent permanent teeth. In piezosurgery, bony tissues are selectively cut, thereby avoiding the soft tissue damage caused by rotary cutting instruments. We report the case of a 15-year-old Japanese boy from whom a deeply impacted supernumerary tooth in the anterior maxillary was safely removed through the floor of the nasal cavity. The surgical extraction was performed without damaging the nasal mucosa or adjacent structures such as the roots of the adjacent permanent teeth. Considering that piezosurgery limits the extent of surgical invasion, this technique can be practiced as a minimally invasive and safe surgical procedure for treating suitably selected cases with a deeply impacted supernumerary tooth. PMID:26779355

[Evaluation of the clinical effect of the teeth with subgingivally involved defect conserved by crown lengthening surgery].

PubMed

Wang, Yong; Ding, Xiao-Hong; Yao, Li-Li; Huang, Zhong-Suo; Bian, Hua-Qin

2005-02-01

To evaluate the clinical effect of the teeth with subgingivally involved defect which were conserved by crown lengthening surgery. 62 teeth, with defect subgingivally from 1.5 mm to 4 mm, mobility degree(MD)0.05), but a significant increase about MD occurred in the major defect group one year after restoration (P<0.01), and there was significant correlation between MD of each stage after operation and PD of pre-operation in anterior teeth (r=0.489, 0.526, 0.531, P<0.01). According to the biological width principle, crown lengthening surgery may conserve these teeth with subgingivally involved defect, and has a good, long-time clinical effect. But MD showed an increasing trend after operation and significant cor.

Removable orthodontic appliance with nickel-titanium spring to reposition the upper incisors in an autistic patient.

PubMed

Saito, Kan; Jang, Insan; Kubota, Kazumi; Hoshino, Tomonori; Hotokezaka, Hitoshi; Yoshida, Noriaki; Fujiwara, Taku

2013-01-01

A newly designed removable appliance with a shape-memory wire was used for the orthodontic treatment of the anterior teeth in an 11-year-old child who had autism and intellectual disability. The device was designed to reduce the lateral incisor crossbite and the central incisors' labial rotation. The child was treated for 1 year with this removable appliance. Tooth movement was analyzed using cephalograms and surface data were derived from study models. This device proved to be very durable. The lateral incisor crossbite was corrected, and the inclination of the upper central incisors and the interincisal angle were improved. This appliance exerts light and continuous orthodontic force, without requiring any adjustments of the spring wire. The appliance also facilitated orthodontic treatment in a child with intellectual disability in whom treatment with a standard orthodontic device would be unsuitable. ©2012 Special Care Dentistry Association and Wiley Periodicals, Inc.

[Diagnossis and treatment of complicated anterior teeth esthetic defects by combination of whole-process digital esthetic rehabilitation with periodontic surgery].

PubMed

Li, Z; Liu, Y S; Ye, H Q; Liu, Y S; Hu, W J; Zhou, Y S

2017-02-18

To explore a new method of whole-process digital esthetic prosthodontic rehabilitation combined with periodontic surgery for complicated anterior teeth esthetic defects accompanied by soft tissue morphology, to provide an alternative choice for solving this problem under the guidance of three-dimensional (3D) printing digital dental model and surgical guide, thus completing periodontic surgery and digital esthetic rehabilitation of anterior teeth. In this study, 12 patients with complicated esthetic problems accompanied by soft tissue morphology in their anterior teeth were included. The dentition and facial images were obtained by intra-oral scanning and three-dimensional (3D) facial scanning and then calibrated. Two esthetic designs and prosthodontic outcome predictions were created by computer aided design /computer aided manufacturing (CAD/CAM) software combined with digital photography, including consideration of white esthetics and comprehensive consideration of pink-white esthetics. The predictive design of prostheses and the facial appearances of the two designs were evaluated by the patients. If the patients chose the design of comprehensive consideration of pink-white esthetics, they would choose whether they would receive periodontic surgery before esthetic rehabilitation. The dentition design cast of those who chose periodontic surgery would be 3D printed for the guide of periodontic surgery accordingly. In light of the two digital designs based on intra-oral scanning, facing scanning and digital photography, the satisfaction rate of the patients was significantly higher for the comprehensive consideration of pink-white esthetic design (P<0.05) and more patients tended to choose priodontic surgery before esthetic rehabilitation. The 3D printed digital dental model and surgical guide provided significant instructions for periodontic surgery, and achieved success transfer from digital design to clinical application. The prostheses were fabricated by CAD/CAM, thus realizing the whole-process digital esthetic rehabilitation. The new method for esthetic rehabilitation of complicated anterior teeth esthetic defects accompanied by soft tissue morphology, including patient-involved digital esthetic analysis, design, esthetic outcome prediction, 3D printing surgical guide for periodontic surgery and digital fabrication is a practical technology. This method is useful for improvement of clinical communication efficiency between doctor-patient, doctor-technician and doctors from different departments, and is conducive to multidisciplinary treatment of this complicated anterior teeth esthetic problem.

The Effect of Multiple Sulfatase Deficiency (MSD) on Dental Development: Can We Use the Teeth as an Early Diagnostic Tool?

PubMed

Zilberman, Uri; Bibi, Haim

2016-01-01

Multiple sulfatase deficiency (MSD) is a rare autosomal recessive inborn error of metabolism due to reduced catalytic activity of the different sulfatase. Affected individuals show neurologic deterioration with mental retardation, skeletal anomalies, organomegaly, and skin changes as in X-linked ichthyosis. The only organ that was not examined in MSD patients is the dentition. To evaluate the effect of the metabolic error on dental development in a patient with the intermediate severe late-infantile form of MSD (S155P). Histological and chemical study were performed on three deciduous and five permanent teeth from MSD patient and pair-matched normal patients. Tooth germ size and enamel thickness were reduced in both deciduous and permanent MSD teeth, and the scalloping feature of the DEJ was missing in MSD teeth causing enamel to break off from the dentin. The mineral components in the enamel and dentin were different. The metabolic error insults the teeth in the stage of organogenesis in both the deciduous and permanent dentition. The end result is teeth with very sharp cusp tips, thin hypomineralized enamel, and exposed dentin due to the break off of enamel. These findings are different from all other types of MPS syndromes.Clinically the phenotype of intermediate severe late-infantile form of MSD appeared during the third year of life. In children of parents that are carriers, we can diagnose the disease as early as birth using X-ray radiograph of the anterior upper region or as early as 6-8 months when the first deciduous tooth erupt and consider very early treatment to ameliorate the symptoms.

[Anterior bridges with the IPS-Empress-2 System after alveolar ridge augmentation. A case report].

PubMed

Zawta, C; Bernhard, M

2000-01-01

The success of a prosthesis is judged according to optimal function, good chewing comfort, adequate phonetics and white and pink esthetics. The aim of a treatment is to approach the perfection of nature. For anterior bridgework, the all-ceramic System IPS Empress 2 offers light transmission and reflection comparable to that of natural teeth, provided that the pink esthetics are optimised in the preprosthetic phase. The provision of an anterior bridge in the IPS Empress 2-system is presented here in the form of a case report. After extraction of the anterior teeth, a ridge augmentation including preparation of the pontic bed was carried out. The type of post and core, preparation and cementation are important parameters for the success of all-ceramic restorations.

Gingival zenith positions and levels of the maxillary anterior dentition.

PubMed

Chu, Stephen J; Tan, Jocelyn H-P; Stappert, Christian F J; Tarnow, Dennis P

2009-01-01

The location of the gingival zenith in a medial-lateral position relative to the vertical tooth axis of the maxillary anterior teeth remains to be clearly defined. In addition, the apex of the free gingival margin of the lateral incisor teeth relative to the gingival zeniths of the adjacent proximal teeth remains undetermined. Therefore, this investigation evaluated two clinical parameters: (1) the gingival zenith position (GZP) from the vertical bisected midline (VBM) along the long axis of each individual maxillary anterior tooth; and (2) the gingival zenith level (GZL) of the lateral incisors in an apical-coronal direction relative to the gingival line joining the tangents of the GZP of the adjacent central incisor and canine teeth under healthy conditions. A total of 240 sites in 20 healthy patients (13 females, 7 males) with an average age of 27.7 years were evaluated. The inclusion patient criteria were absence of periodontal disease, gingival recession, or gingival hypertrophy as well as teeth without loss of interdental papillae, spacing, crowding, existing restorations, and incisal attrition. GZP dimensions were measured with calibrated digital calipers for each individual tooth and within each tooth group in a medial-lateral direction from the VBM. GZLs were measured in an apical-coronal direction from a tangent line drawn on the diagnostic casts from the GZPs of the adjacent teeth. This study demonstrated that all central incisors displayed a distal GZP from the VBM, with a mean average of 1 mm. Lateral incisors showed a deviation of the gingival zenith by a mean of 0.4 mm. In 97.5% of the canine population, the GZP was centralized along the long axis of the canine. The mean distance of the contour of the gingival margin in an apical-coronal direction of the lateral incisors (GZL) relative to gingival line joining the tangent of the adjacent central and canine GZPs was approximately 1 mm. This investigation revealed a GZP mean value of 1 mm distal from the VBM for the central incisor tooth group. The lateral incisors showed a mean average of 0.4 mm. The canine tooth group demonstrated almost no deviations of the GZP from the VBM. The GZL of the lateral incisors relative to the adjacent central incisor and canine teeth were more coronal by approximately 1 mm. These data could be used as reference points during esthetic anterior oral rehabilitation. The information presented in this article can be clinically applied to reestablish the proper intratooth GZPs of the maxillary anterior teeth during periodontal crown lengthening or root coverage procedures. In addition, the intra-arch gingival level of the lateral incisor gingival zenith relative to the adjacent central and canine teeth can be appropriately established.

Evaluation of a technique for color correction in restoring anterior teeth.

PubMed

Rauber, Gabrielle Branco; Bernardon, Jussara Karina; Vieira, Luiz Clovis Cardoso; Baratieri, Luiz Narciso

2017-09-01

This study aimed to evaluate the ability of the proposed technique in producing restorations that exhibit mimesis with tooth structure and to define a restorative clinical protocol. For this study a typodont was used. The right upper central incisor with Class IV lesion was restored with the layering technique (reference tooth, RT). For the left upper central incisor with Class IV lesion, six teeth were restored monochromatically (test teeth, TT), using DA3.5 (n = 3) and DA4 (n = 3) composite resins-resulting in six unsatisfactory color restorations. TT were divided into six groups depending on the color of unsatisfactory restoration and preparation depth. First, a preparation was realized on the labial surface with 0.5 mm, 0.7 mm or 1.0 mm of depth. A second preparation was then performed to reproduce the dentinal mamelons. Next, adhesive procedures were performed and the teeth restored. Opaque halo, opalescent halo and vestibular enamel were then reproduced by the addition of different composite resins. The RT and TT were photographed side by side in typodont to obtain six photographic prints. The photographs of the groups were subjected to visual evaluation by 120 volunteers via a questionnaire. Data were analyzed by the prevalence of answers, and Chi-square test was used to investigate the association between variables at .05 significance. Furthermore, ΔE of groups was evaluated in comparison RT. The results demonstrated that the moderate intensity restorations (DA3.5) with depths of 0.5 mm and 0.7 mm had the highest prevalence of acceptance. For severe intensity restorations (DA4), the preparation depth of 1.0 mm obtained better acceptance. The technique was able to modify the final color of Class IV restorations, producing satisfactory color restorations. This technique can be used for color correction in cases of Class IV restorations, in situations where there is no time for immediate layered restoration, and as a restorative technique. © 2017 Wiley Periodicals, Inc.

Prevalence of Traumatic Dental Injuries to the Permanent Anterior Teeth among 9- to 14-year-old Schoolchildren of Navi Mumbai (Kharghar-Belapur Region), India.

PubMed

Hegde, Rahul; Agrawal, Geet

2017-01-01

To measure the prevalence of anterior teeth trauma in 9- to 14-year-old schoolchildren and their association with predisposing factors, such as lip competence, molar relationship, overjet, and variables, such as age, gender, and cause of trauma. Epidemiological cross-sectional study was carried out among 3,012 schoolchildren aged 9 to 14 years in Navi Mumbai (Kharghar-Belapur region). The sample size was derived using the stratified random sampling method; we picked six schools from the region. These schools had 3,000 students in the acceptable age group of the study which constituted our final sample size. All children were examined for traumatic dental injuries, and the children with positive findings were further examined for lip competence, Angle's molar relationship, and overjet. The results were statistically analyzed using cross-tabulation and Chi-square test. The prevalence of dental injuries was 7.3%, and the ratio of male to female children was found to be 1.6:1. The maximum number of traumatic dental injuries was found with class I molar relationship and overjet less than 3.5 mm in children with competent lips. Maximum number of injuries occurred in the age group of 13-14 years. The most predominant type of injury was the enamel fracture and the most common cause determined was due to fall. The present study is a collection of data on traumatic injuries to anterior teeth, which is seen very commonly in day-to-day practice. The frequency and cause of traumatic injuries to anterior teeth is important for identification of risk groups, treatment needs, and cost involved in order for establishing effective preventive measures. Hegde R, Agrawal G. Prevalence of Traumatic Dental Injuries to the Permanent Anterior Teeth among 9- to 14-year-old Schoolchildren of Navi Mumbai (Kharghar-Belapur Region), India. Int J Clin Pediatr Dent 2017;10(2):177-182.

Asymmetric severe skeletal Class II division 1 patient with temporomandibular joint disorder treated with zygomatic anchorage devices and Ni-Ti alloy wires.

PubMed

Ishida, Takayoshi; Ono, Takashi

2014-09-01

To describe the orthodontic treatment of a nongrowing 30-year-old woman with asymmetric severe skeletal Class II malocclusions (asymmetric Angle Class II), large overjet (16 mm), large overbite (8 mm), two congenitally missing mandibular incisors (presenting a deciduous anterior tooth), and signs and symptoms of temporomandibular joint disorder (TMD). We used novel improved super-elastic Ni-Ti alloy wires (ISWs) combined with Ni-Ti alloy coil springs, power hooks, and a zygomatic implant as reinforced anchorage to provide a constant and continuous mild force to the dentition. We successfully distalized maxillary molars, premolars, and retracted anterior teeth and corrected the asymmetric Angle Class II molar relationship using this system of zygomatic anchorage in conjunction with ISWs, Ni-Ti alloy open-coil springs, and crimpable power hook. The maxillary molars were distalized, and postero-occlusal relationships were improved to achieve Class I canine and molar relationships on both sides. Intrusion of the upper molars made the mandibular plane close. Ideal overbite and overjet relationships were established. Facial esthetics were improved with decreased upper and lower lip protrusion, and no symptoms of TMD were observed after treatment. The orthodontic treatment described here is a promising anchorage technique alternative to traditional techniques to improve severe skeletal Class II with TMD.

Clinical Performance of Pedo Jacket Crowns in Maxillary Anterior Primary Teeth.

PubMed

Castro, Aimee; Badr, Sherine B Y; El-Badrawy, Wafa; Kulkarni, Gajanan

2016-09-15

To assess the clinical performance of Pedo Jacket crowns for restoration of carious primary anterior teeth. A total of 129 carious primary incisors and canines of 48 children younger than 71 months of age- were restored with Pedo Jacket crowns and resin-modified glass ionomer cementation. They were assessed for: ease of use; presence of recurrent decay; wear; partial or complete loss of the crown; color stability; gingival health; and overall clinical success over a 12-month follow-up. The patient's behavior at the restorative appointment during crown placement was also assessed. An overall clinical success of 89.5 percent of the teeth in 87.3 percent of the children was seen one year later. The crowns were easy to use, even in uncooperative children. The color stability, wear, plaque accumulation, and gingival health were acceptable. Discoloration, wear, or complete loss of the crown were found in 13.1 percent, 5.4 percent, and 7.6 percent of children, respectively. Although not statistically significant, failures were associated with poor patient cooperation at the time of crown placement, poor oral hygiene, or operator error. Pedo Jacket crowns are a viable treatment alternative for carious maxillary primary anterior teeth.

Initial forces experienced by the anterior and posterior teeth during dental-anchored or skeletal-anchored en masse retraction in vitro.

PubMed

Lee, David; Heo, Giseon; El-Bialy, Tarek; Carey, Jason P; Major, Paul W; Romanyk, Dan L

2017-07-01

To investigate initial forces acting on teeth around the arch during en masse retraction using an in vitro Orthodontic SIMulator (OSIM). The OSIM was used to represent the full maxillary arch in a case wherein both first premolars had been extracted. Dental and skeletal anchorage to a posted archwire and skeletal anchorage to a 10-mm power arm were all simulated. A 0.019 × 0.025-inch stainless steel archwire was used in all cases, and 15-mm light nickel-titanium springs were activated to approximately 150 g on both sides of the arch. A sample size of n = 40 springs were tested for each of the three groups. Multivariate analysis of variance (α = 0.05) was used to determine differences between treatment groups. In the anterior segment, it was found that skeletal anchorage with power arms generated the largest retraction force (P < .001). The largest vertical forces on the unit were generated using skeletal anchorage, followed by skeletal anchorage with power arms, and finally dental anchorage. Power arms were found to generate larger intrusive forces on the lateral incisors and extrusive forces on the canines than on other groups. For the posterior anchorage unit, dental anchorage generated the largest protraction and palatal forces. Negligible forces were measured for both skeletal anchorage groups. Vertical forces on the posterior unit were minimal in all cases (<0.1 N). All retraction methods produced sufficient forces to retract the anterior teeth during en masse retraction. Skeletal anchorage reduced forces on the posterior teeth but introduced greater vertical forces on the anterior teeth.

Patients' preference for exodontia versus preservation in Malaysia.

PubMed

Razak, I A; Jaafar, N; Jalalludin, R L; Esa, R

1990-06-01

A total of 537 dentate adults from nine randomly selected government dental centers in three states in Malaysia were interviewed to assess their preference for either exodontia or preservation of teeth when they experience toothache, or have carious anterior or posterior teeth. The assumptions tested were i) patients prefer exodontia rather than preservation when they have toothache, and ii) patients are more willing to have posterior teeth extracted than anterior teeth for caries. Both these assumptions were rejected. Even though the majority of the subjects preferred preservation (59%) when having toothache, exodontia was the treatment of choice in a large proportion of subjects (41%). Significant differences in preference were found among the various ethnic, educational, income, and age groups. However, when ethnicity was held constant, binary regression indicated that the variations observed were determined by education, income, and age groups and not by ethnicity.

Cemental tear: To know what we have neglected in dental practice.

PubMed

Jeng, Po-Yuan; Luzi, Arlinda Luzi; Pitarch, Rocio Marco; Chang, Mei-Chi; Wu, Yu-Hsueh; Jeng, Jiiang-Huei

2018-04-01

Cemental tear is a special kind of root surface fracture, contributing to periodontal and periapical breakdown. However, it is a challenge for doctors to diagnose, resulting in delayed or improper treatment. We reviewed the predisposing factors, location, radiographic/clinical characteristics, diagnosis and treatments of cemental tears. From the literature, patients with cemental tear were mainly males, over 60 year-old. Possible predisposing factors include gender, age, tooth type, traumatic occlusal force and vital teeth. Cemental tears were common in upper and lower anterior teeth, single or multiple, and can be present in cervical, middle and apical third of roots. Morphology of cemental tears can be either piece-shaped or U-shaped. Clinically, cemental tear shows a unitary periodontal pocket and signs/symptoms mimicking localized periodontitis, apical periodontitis and vertical root fractures. Treatment of cemental tears include scaling, root planning, root canal treatment, periodontal/periapical surgery, guided tissue regeneration, bone grafting, and intentional replantation. Recurrence of cemental tear is possible especially when the fracture involves root apex. Extraction is recommended for teeth with poor prognosis. In conclusion, cemental tears can involve both periodontal and periapical area. Dentists should understand the predisposing factors and clinical features of cemental tears for early diagnosis/treatment to prevent bone loss/tooth extraction. Copyright © 2017. Published by Elsevier B.V.

At first glance: social meanings of dental appearance.

PubMed

Eli, I; Bar-Tal, Y; Kostovetzki, I

2001-01-01

An important factor in social interaction is physical appearance. Major elements in the evaluation of physical appearance are the mouth and teeth. The purpose of this study was to evaluate the effect of tooth appearance on the development of a first impression of the other person, with regard to the sex of both the respondent and the target. Eight facial photographs of individuals with intact upper teeth were manipulated: one set was left untouched and the other was professionally altered so that the front anterior teeth appeared decayed. The photographs were randomly aligned in sets of eight, each set consisting of four individuals with an original, intact dentition and four other individuals with a "decayed" dentition. The sets of photographs were then presented to 115 respondents (65 males and 50 females). Evaluations were made according to three categories of traits--esthetic, social, and professional. For all three evaluation categories, the difference in scores between decayed and intact dentition given to targets were significantly higher when participants of one sex evaluated targets of the opposite sex, as compared to evaluating targets of their own sex. The effect of tooth appearance on the physical attractiveness stereotype is more evident when males evaluate females and vice versa, rather than when evaluating their own sex.

A new species of Hyphessobrycon (Characiformes, Characidae) from the upper Guaviare River, Orinoco River Basin, Colombia

PubMed Central

García-Alzate, Carlos A.; Urbano-Bonilla, Alexander; Taphorn, Donald C.

2017-01-01

Abstract Hyphessobrycon klausanni sp. n. is described from small drainages of the upper Guaviare River (Orinoco River Basin) in Colombia. It differs from all congeners by having a wide, conspicuous, dark lateral stripe extending from the anterior margin of the eye across the body and continued through the middle caudal-fin rays, and that covers (vertically) three or four horizontal scale rows. It also differs by having an orange-yellow stripe extending from the anterosuperior margin of the eye to the caudal peduncle above the lateral line in life. It differs from all other species of Hyphessobrycon that have a similar dark lateral stripe: H. cyanotaenia, H. loretoensis, H. melanostichos, H. nigricinctus, H. herbertaxelrodi, H. eschwartzae, H. montogoi, H. psittacus, H. metae, H. margitae, H. vanzolinii, and H. peruvianus in having only three or four pored scales in the lateral line, 21 to 24 lateral scales and six teeth in the inner premaxillary row. Hyphessobrycon klausanni differs from H. loretoensis in having seven to eight maxillary teeth (vs. three to four) and in having a longer caudal peduncle (12.4–17.0% SL vs. 4.6–8.0% SL). Additionally Hyphessobrycon klausanni can be distinguished from the other species of Hyphessobrycon with a dark lateral stripe from the Orinoco River Basin (H. metae and H. acaciae) in having two teeth in the outer premaxillary row (vs. three to four) and 10 branched pectoral–fin rays (vs. 11 to 12). It further differs from H. metae by the length of the snout (17.6–22.8% HL vs. 9.9–15.2% HL) and by the length of the caudal peduncle (12.4–17.0% SL vs. 7.3–11.8% SL). PMID:28769647

Front teeth-to-carina distance in children undergoing cardiac catheterization.

PubMed

Hunyady, Agnes I; Pieters, Benjamin; Johnston, Troy A; Jonmarker, Christer

2008-06-01

Knowledge of normal front teeth-to-carina distance (FT-C) might prevent accidental bronchial intubation. The aim of the current study was to measure FT-C and to examine whether the Morgan formula for oral intubation depth, i.e., endotracheal tube (ETT) position at front teeth (cm) = 0.10 x height (cm) + 5, gives appropriate guidance when intubating children of different ages. FT-C was measured in 170 infants and children, aged 1 day to 19 yr, undergoing cardiac catheterization. FT-C was obtained as the sum of the ETT length at the upper front teeth/dental ridge and the distance from the ETT tip to the carina. The latter measure was taken from an anterior-posterior chest x-ray. There was close linear correlation between FT-C and height: FT-C (cm) = 0.12 x height (cm) + 5.2, R = 0.98. The linear correlation coefficients (R) for FT-C versus weight and age were 0.78 and 0.91, respectively. If the Morgan formula had been used for intubation, the ETT tip would have been at 90 +/- 4% of FT-C. No patient would have been bronchially intubated, but the ETT tip would have been less than 0.5 cm from the carina in 13 infants. FT-C can be well predicted from the height/length of the child. The Morgan formula provides good guidance for intubation in children but can result in a distal ETT tip position in small infants. Careful auscultation is necessary to ensure correct tube position.

FE analysis of conceptual hybrid composite endodontic post designs in anterior teeth.

PubMed

Gloria, Antonio; Maietta, Saverio; Martorelli, Massimo; Lanzotti, Antonio; Watts, David C; Ausiello, Pietro

2018-04-24

To assess conceptual designs of dental posts consisting of polyetherimide (PEI) reinforced with carbon (C) and glass (G) glass fibers in endodontically treated anterior teeth. 3D tessellated CAD and geometric models of endodontically treated anterior teeth were generated from Micro-CT scan images. Model C-G/PEI composite posts with different Young's moduli were analyzed by Finite Element (FE) methods post A (57.7GPa), post B (31.6GPa), post C (from 57.7 to 9.0GPa in the coronal-apical direction). A load of 50N was applied at 45° to the longitudinal axis of the tooth, acting on the palatal surface of the crown. The maximum principal stress distribution was determined along the post and at the interface between the post and the surrounding structure. Post C, with Young's modulus decreasing from 57.7 to 9.0GPa in the coronal-apical direction, reduced the maximum principal stress distribution in the restored tooth. Post C gave reduced stress and the most uniform stress distribution with no stress concentration, compared to the other C-G/PEI composite posts. The FE analysis confirmed the ability of the functionally graded post to dissipate stress from the coronal to the apical end. Hence actual (physical) C-G/PEI posts could permit optimization of stress distributions in endodontically treated anterior teeth. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.

Efficacy of clear aligners in controlling orthodontic tooth movement: a systematic review.

PubMed

Rossini, Gabriele; Parrini, Simone; Castroflorio, Tommaso; Deregibus, Andrea; Debernardi, Cesare L

2015-09-01

To assess the scientific evidence related to the efficacy of clear aligner treatment (CAT) in controlling orthodontic tooth movement. PubMed, PMC, NLM, Embase, Cochrane Central Register of Controlled Clinical Trials, Web of Knowledge, Scopus, Google Scholar, and LILACs were searched from January 2000 to June 2014 to identify all peer-reviewed articles potentially relevant to the review. Methodological shortcomings were highlighted and the quality of the studies was ranked using the Cochrane Tool for Risk of Bias Assessment. Eleven relevant articles were selected (two Randomized Clinical Trials (RCT), five prospective non-randomized, four retrospective non-randomized), and the risk of bias was moderate for six studies and unclear for the others. The amount of mean intrusion reported was 0.72 mm. Extrusion was the most difficult movement to control (30% of accuracy), followed by rotation. Upper molar distalization revealed the highest predictability (88%) when a bodily movement of at least 1.5 mm was prescribed. A decrease of the Little's Index (mandibular arch: 5 mm; maxillary arch: 4 mm) was observed in aligning arches. CAT aligns and levels the arches; it is effective in controlling anterior intrusion but not anterior extrusion; it is effective in controlling posterior buccolingual inclination but not anterior buccolingual inclination; it is effective in controlling upper molar bodily movements of about 1.5 mm; and it is not effective in controlling rotation of rounded teeth in particular. However, the results of this review should be interpreted with caution because of the number, quality, and heterogeneity of the studies.

Maxillary tridimensional changes after slow expansion with leaf expander in a sample of growing patients: a pilot study.

PubMed

Lanteri, V; Gianolio, A; Gualandi, G; Beretta, M

2018-03-01

The aim of this study is to evaluate the dento-alveolar effects of slow maxillary expansion using the Leaf Expander in a sample of growing patients with maxillary transverse deficiency, unilateral cross bite and mandibular shift. The study included 10 patients, 3 male and 7 female (mean age 7.5 + 7 months), treated with Leaf Expander anchored on the upper deciduous teeth. Digital models were obtained by a lab scan of the pvs impressions at the beginning of the therapy (T1) and at the removal of the palatal expander (T2). Five parameters were measured: 1) the distance between the first upper permanent molars; 2) the distance between the upper second deciduous molars; 3) the distance between the upper canine cusps 4) the distance between the first lower permanent molars; 5) the distance of the lower canine cusps. In all patients complete correction of posterior crossbite was achieved on average in 4 months, with a spontaneous expansion of the upper first permanent molars. Significant increases in the dento-alveolar transversal diameters were obtained. Increases were also observed in the anterior mandibular arch diameter (+ 1 mm). These findings suggest that slow maxillary expansion using Leaf Expander appliance could be a reasonable alternative to conventional maxillary expansion therapy in the early mixed dentition.

Orthodontic treatment in cherubism: an overview and a case report.

PubMed

Abela, Stefan; Cameron, Malcolm; Bister, Dirk

2014-11-01

Cherubism is a rare hereditary disease that frequently manifests as a painless enlargement of the mandible and/or maxilla. The disease usually progresses rapidly during the first and second decades of life but it is self-limiting and often regresses. Although few orthodontic case reports describing cherubic patients exist, the timing and extent of surgical intervention is controversial. This present paper aims to review the treatment literature and provide a case report of a patient who underwent orthodontic/surgical management. The patient presented with severe cherubism in her late teenage years; her main complaint was poor facial and dental appearance. Multiple teeth were missing and those present demonstrated significant preoperative root resorption. Treatment consisted of orthodontic alignment of the upper anterior teeth and a recontouring osteotomy. Confirmed by the patient, the combination approach led to a significant improvement in facial aesthetics and better self-esteem. Tooth movement through the osseous lesions was uneventful and no further root resoption was observed. Orthodontic treatment may be undertaken in those affected by Cherubism even with pre-existing idiopathic root resorption, but patients need to be appropriately informed and consented.

Evolutionary aspects of the development of teeth and baleen in the bowhead whale.

PubMed

Thewissen, J G M; Hieronymus, Tobin L; George, John C; Suydam, Robert; Stimmelmayr, Raphaela; McBurney, Denise

2017-04-01

In utero, baleen whales initiate the development of several dozens of teeth in upper and lower jaws. These tooth germs reach the bell stage and are sometimes mineralized, but toward the end of prenatal life they are resorbed and no trace remains after birth. Around the time that the germs disappear, the keratinous baleen plates start to form in the upper jaw, and these form the food-collecting mechanism. Baleen whale ancestors had two generations of teeth and never developed baleen, and the prenatal teeth of modern fetuses are usually interpreted as an evolutionary leftover. We investigated the development of teeth and baleen in bowhead whale fetuses using histological and immunohistochemical evidence. We found that upper and lower dentition initially follow similar developmental pathways. As development proceeds, upper and lower tooth germs diverge developmentally. Lower tooth germs differ along the length of the jaw, reminiscent of a heterodont dentition of cetacean ancestors, and lingual processes of the dental lamina represent initiation of tooth bud formation of replacement teeth. Upper tooth germs remain homodont and there is no evidence of a secondary dentition. After these germs disappear, the oral epithelium thickens to form the baleen plates, and the protein FGF-4 displays a signaling pattern reminiscent of baleen plates. In laboratory mammals, FGF-4 is not involved in the formation of hair or palatal rugae, but it is involved in tooth development. This leads us to propose that the signaling cascade that forms teeth in most mammals has been exapted to be involved in baleen plate ontogeny in mysticetes. © 2017 Anatomical Society.

Early Pleistocene hominin deciduous teeth from the Homo antecessor Gran Dolina-TD6 bearing level (Sierra de Atapuerca, Spain).

PubMed

Bermúdez de Castro, José María; Martinón-Torres, María; Martín-Francés, Laura; Martínez de Pinillos, Marina; Modesto-Mata, Mario; García-Campos, Cecilia; Wu, Xiujie; Xing, Song; Liu, Wu

2017-07-01

During the last 13 years, the late Early Pleistocene Gran Dolina-TD6-2 level (Sierra de Atapuerca, northern Spain) has yielded an additional sample of 26 dental specimens attributed to Homo antecessor. In this report, we present a descriptive and comparative study of the six deciduous teeth. We provide external and internal morphological descriptions following classical terminology, as well as the mesiodistal and buccolingual measurements of the teeth. The internal morphology was described by means of micro-CT technique. The TD6 deciduous teeth preserve primitive features regarding the Homo clade, such as the presence of styles in lower and upper canines and developed anterior and posterior foveae in the dm 2 . However, other features related to the complexity of the crown morphology (e.g., cingulum) are not present in this sample. Furthermore, the great reduction of the talonid of the dm 1 s is also noteworthy. Despite the limited comparative evidence, the presence of a remarkably well-developed tuberculum molare in the dm 1 and dm 1 s from TD6 can be also considered a derived feature in the genus Homo. The TD6 hominins exhibit dental dimensions similar to those of other Pleistocene hominins. The dm 1 s are buccolingually elongated and the buccolingual diameter of ATD6-93 is the largest recorded so far in the Homo fossil record. This study expands the list of plesiomorphic features of H. antecessor, and provides some information on the evolutionary status of this species. However, the identification of some advanced traits evinces a step towards the derived morphology of European Pleistocene teeth. The study of the deciduous dentition confirms the mosaic pattern of H. antecessor morphology revealed in previous studies of this hominin sample. © 2017 Wiley Periodicals, Inc.

[Esthetic restoration for anterior teeth with the hot pressed porcelain laminate veneers].

PubMed

Xu, Shao-ping; Luo, Xiao-ping; Shi, Yu-juan

2012-10-01

To evaluate the esthetic effect of anterior porcelain veneers fabricated with the heat pressed glass ceramic. Thirty-two patients, who wanted to receive a aesthetic restorative treatment for 206 anterior teeth were selected. Among them, 20 were for dental fluorosis, 8 were for light tetracycline stained teeth, the other 4 were labial enamel hypoplasia or obvious crack on the surface of enamel. According to the color of adjacent teeth,skin and lips, heat pressed IPS e.max ingots of different color were chosen to mold the restorations. Afterwards, special straining technique was conducted on the marginal ridge and incisor ridge of the veneers after carefully trimmed in the mouth. Restorations were them bonded with Variolink II resin cement. After 7 years of follow-up, a modified USPHS criterion was used to evaluate the esthetic effect. The translucency of veneers was superior. Marginal integrity of the veneers was perfect and it docked well with the marginal terminate line of the abutment. There was no edge coloring after the veneers were used for 7 years, and the veneers produce an excellent chameleon effect by absorbing the color of adjacent teeth and gums, at the same time, veneers could produce a feature of surface morphology of natural enamel after careful carve. In the long-term clinical observation, 5 of the 206 veneers were fractured or fell off. This porcelain laminate veneers fabricated from the heat pressed IPS e.max Press ingots include the following advantages, such as simple operating procedure, high mechanical strength, very little dental tissue was ground off and nice aesthetic effect. Ultra-thin veneers are especially suitable for aesthetic practice to dental fluorosis, light tetracycline and natural worn teeth.

The Use of Glass-fibers Ribbon and Composite for Prosthetic Restoration of Missing Primary Teeth-Laboratory and Clinical Research

PubMed Central

Zilberman, Uri; Lasilla, Lippo

2014-01-01

Very few modalities can be used for restoring missing primary anterior teeth, although the impact of missing anterior teeth during early childhood can be harmful. In the permanent dentition the use of glass-fibers ribbon and composite materials are frequently used for restoring missing teeth with no or minimal preparation. The purpose of this study was to examine the possibility to use the glass-fibers ribbon (ever-Stick from GC Corporation, Japan) together with esthetic composite materials (G-aenial A1 from GC Corporation, Japan) for restoring anterior primary teeth and to determine the best methodology and bonding system to be used. The effect of etching time was analyzed using 20-80 sec on primary buccal enamel with SEM and the results showed that at least 60 second is necessary in order to remove the prismless layer and to affect the prismatic layer similar (as observed by SEM) to the 20 sec etching time on permanent enamel. Three bonding systems (SE Bond by Kurary, Japan, Scotchbond Universal by 3M/ESPE, Germany and G-aenial bond by GC Company, Japan) were compared for bonding the glass-fibers ribbon to the primary enamel and microtensile strength analyses were performed. Mean tensile strength ranged from 10.9 to 13 MPa with no statistically significant differences between all three systems. Based on the laboratory results it can be concluded that the glass-fibers ribbon together with the composite material can be used clinically to restore missing primary teeth for esthetic and functional reasons. Two clinical cases are presented that show favorable results. PMID:25553140

Prevalence of Traumatic Dental Injuries to the Permanent Anterior Teeth among 9- to 14-year-old Schoolchildren of Navi Mumbai (Kharghar-Belapur Region), India

PubMed Central

Hegde, Rahul

2017-01-01

Aims and objectives To measure the prevalence of anterior teeth trauma in 9- to 14-year-old schoolchildren and their association with predisposing factors, such as lip competence, molar relationship, overjet, and variables, such as age, gender, and cause of trauma. Materials and methods Epidemiological cross-sectional study was carried out among 3,012 schoolchildren aged 9 to 14 years in Navi Mumbai (Kharghar-Belapur region). The sample size was derived using the stratified random sampling method; we picked six schools from the region. These schools had 3,000 students in the acceptable age group of the study which constituted our final sample size. All children were examined for traumatic dental injuries, and the children with positive findings were further examined for lip competence, Angle’s molar relationship, and overjet. The results were statistically analyzed using cross-tabulation and Chi-square test. Results The prevalence of dental injuries was 7.3%, and the ratio of male to female children was found to be 1.6:1. The maximum number of traumatic dental injuries was found with class I molar relationship and overjet less than 3.5 mm in children with competent lips. Maximum number of injuries occurred in the age group of 13-14 years. The most predominant type of injury was the enamel fracture and the most common cause determined was due to fall. Conclusion The present study is a collection of data on traumatic injuries to anterior teeth, which is seen very commonly in day-to-day practice. The frequency and cause of traumatic injuries to anterior teeth is important for identification of risk groups, treatment needs, and cost involved in order for establishing effective preventive measures. How to cite this article Hegde R, Agrawal G. Prevalence of Traumatic Dental Injuries to the Permanent Anterior Teeth among 9- to 14-year-old Schoolchildren of Navi Mumbai (Kharghar-Belapur Region), India. Int J Clin Pediatr Dent 2017;10(2):177-182. PMID:28890619

Occlusal tooth wear in Chinese adults with shortened dental arches.

PubMed

Zhang, Q; Witter, D J; Bronkhorst, E M; Bartlett, D W; Creugers, N H J

2014-02-01

To assess associations between occlusal tooth wear and shortened dental arches (SDA) in Chinese 40 years and older subjects. From a sample of 1462 urban and rural adults, those presenting with SDA (n = 150) were compared with a control group of 65 randomly selected subjects with complete dentitions (CDA). Occlusal wear was assessed using a modified Smith and Knight index - the occlusal tooth wear index (OWTI) - and analysed using multivariate (logistic) regression. There was no significant effect from SDA on severe occlusal wear (OTWI score 3 or 4: OR = 2.016; 95% CI = 0.960-4.231; P = 0.064). Higher age was associated with severe occlusal wear (P values ≤0.007) and with higher mean OTWI scores; urban had less often severe occlusal wear than rural residents (OR = 0.519; P = 0.008). Higher mean OTWI scores were associated with rural residents, except for anterior teeth. Females had lower mean OTWI score for anterior teeth (effect = -0.153; P = 0.030). Premolars in SDA had higher mean OTWI scores compared with those in CDA (effect = +0.213; P = 0.006). In SDA, more posterior occluding pairs (POPs) were associated with lower mean OTWI sores for anterior teeth (effect: -0.158; P = 0.008) and higher scores for molars (effect: +0.249, P = 0.003). Subjects with SDA or CDA presented comparable occlusal wear, but premolars in SDA tend to have higher probability for having occlusal wear. Fewer numbers of POPs were associated with more wear in anterior teeth. © 2013 John Wiley & Sons Ltd.

An Analysis of Maxillary Anterior Teeth Dimensions for the Existence of Golden Proportion: Clinical Study.

PubMed

Sandeep, Nalla; Satwalekar, Parth; Srinivas, Siva; Reddy, Chandra Sekhar; Reddy, G Ramaswamy; Reddy, B Anantha

2015-09-01

Appearance of the face is a great concern to everyone, as it is a significant part of self-image. The study analyzed the clinical crown dimensions of the maxillary anterior teeth with respect to their apparent mesiodistal widths, width-to-height ratio to determine whether golden proportion existed among the South Indian population. A total of 240 dentulous subjects were chosen for the study (120 males and 120 females) age ranging between 18 and 28 years. Full face and anterior teeth images of the subjects were made on specially designed device resembling a face-bow, mounted onto the wall under a standard light source. The width and height of the maxillary central incisors were measured on the stone casts using a digital caliper. The mean perceived maxillary lateral incisor to central incisor width ratio was 0.67 in males and 0.703 in females. The mean perceived maxillary canine to lateral incisor width ratio was 0.744 in males and 0.714 in females. The mean width-to-height ratio of the maxillary central incisor was 79.49% in males and 79.197% in females. The golden proportion was not found between perceived mesiodistal widths of maxillary central and lateral incisors and nor between perceived mesiodistal widths of maxillary lateral incisors and canines. In the majority of subjects, the width-to-height ratio of maxillary central incisor was within 75-80%. There are no statistically significant differences in maxillary anterior teeth proportions between males and females. The results may serve as guidelines for treatment planning in restorative dentistry and periodontal surgery.

Zirconia crowns for rehabilitation of decayed primary incisors: an esthetic alternative.

PubMed

Ashima, G; Sarabjot, K Bhatia; Gauba, K; Mittal, H C

2014-01-01

Esthetic management of extensively decayed primary maxillary anterior teeth requiring full coronal coverage restoration is usually challenging to the pediatric dentists especially in very young children. Many esthetic options have been tried over the years each having its own advantages, disadvantages and associated technical, functional or esthetic limitations. Zirconia crowns have provided a treatment alternative to address the esthetic concerns and ease of placement of extra-coronal restorations on primary anterior teeth. The present article presents a case where grossly decayed maxillary primary incisors were restored esthetically and functionally with ready made zirconia crowns (ZIRKIZ, HASS Corp; Korea). After endodontic treatment the decayed teeth were restored with zirconia crowns. Over a 30 months period, the crowns have demonstrated good retention and esthetic results. Dealing with esthetic needs in children with extensive loss of tooth structure, using Zirconia crowns would be practical and successful. The treatment described is simple and effective and represents a promising alternative for rehabilitation of decayed primary teeth.

Relationships between age and dental attrition in Australian aboriginals.

PubMed

Richards, L C; Miller, S L

1991-02-01

Tooth wear scores (ratios of exposed dentin to total crown area) were calculated from dental casts of Australian Aboriginal subjects of known age from three populations. Linear regression equations relating attrition scores to age were derived. The slope of the regression line reflects the rate of tooth wear, and the intercept is related to the timing of first exposure of dentin. Differences in morphology between anterior and posterior teeth are reflected in a linear relationship between attrition scores and age for anterior teeth but a logarithmic relationship for posterior teeth. Correlations between age and attrition range from less than 0.40 for third molars (where differences in the eruption and occlusion of the teeth resulted in different patterns of wear) to greater than 0.80 for the premolars and first molars. Because of the generally high correlations between age and attrition, it is possible to estimate age from the extent of tooth wear with confidence limits of the order of +/- 10 years.

Cast titanium overlay denture for a geriatric patient with a reduced vertical dimension.

PubMed

Guttal, Satyabodh; Patil, Narendra P

2005-12-01

An older patient reporting to the dental surgery for his/her dental treatment is becoming a common occurrence. Improved oral hygiene has meant that teeth are retained for a longer time, along with the potential problems of attrition, decreased vertical dimension, temporomandibular joint discomfort/strain, and poor aesthetics. The case in question is that of a 65-year-old male patient who had severe attrition in the lower arch, temporomandibular joint pain and reduced vertical dimension. The maxillary arch had previously been restored with a fixed partial prosthesis. For restoration of the lower teeth, a removable cast titanium overlay denture was fabricated incorporating an increased vertical dimension. Porcelain facings were placed to restore the aesthetics of the anterior teeth. The titanium was cast in a semi-automatic electric arc, pressure type casting machine. A titanium overlay denture with porcelain facing on the anterior teeth may provide a means of restoring a patient's concerns regarding aesthetics and function.

[Comparative study of the fracture resistance of sound upper premolars and upper premolars restored with bonded amalgam].

PubMed

Minto, André Marcelo Peruchi; Dinelli, Welingtom; Nonaka, Tomio; Thome, Luis Henrique de Camargo

2002-01-01

The purpose of this in vitro study was to determine the fracture resistance of upper premolars which had received class II preparations (conservative and extensive) and were restored with bonded amalgam, with two different adhesive systems. Seventy teeth were divided in four groups: group 1 (control), with ten sound teeth; group 2, with twenty prepared teeth (10 teeth received conservative cavities and 10, extensive cavities) restored with amalgam without any kind of liner; groups 3 and 4, similar to group 2, though with linings of glass ionomer cement (Vitrebond - 3M) (group 3) and dental adhesive (Scotchbond Multi-Purpose Plus - 3M) (group 4). The teeth were previously fixed in PVC cylinders with acrylic resin. After being restored and thermocycled, the test specimens were submitted to fracture by means of compression in an EMIC-MEM 2000 universal testing machine. After the application of the analysis of variance and complementary Tukey's test, we concluded that the utilized adhesive systems produced an increase of the fracture resistance of teeth presenting with conventional cavities; the teeth presenting with conservative cavities were more resistant in all experimental situations.

Effect of Fluoride Varnish on Enamel Remineralization in Anterior Teeth with Molar Incisor Hypomineralization.

PubMed

Restrepo, Manuel; Jeremias, Fabiano; Santos-Pinto, Lourdes; Cordeiro, Rita Cl; Zuanon, Angela Cc

The objective of this study was to investigate the effect of fluoride varnish on remineralization of anterior teeth affected by Molar-Incisor Hypomineralization (MIH) by means of Quantitative Light-Induced Fluorescence- QLF. Fifty-one healthy 9 - 12- year-old children were selected according to different clinically diagnosed levels of MIH, proposed by the European Academy of Pediatric Dentistry (2003) (considering the most severe lesion per patient, n= 51 lesions), and randomly divided into two groups: (1) four applications of 5% NaF varnish, with one-week interval, and (2) usual home care- control. At each visit, the mean change in fluorescence and area of lesion were measured by QLF. The data were analyzed by repeated measures ANOVA and Tukey's test. All patients showed enamel alterations in first permanent molars and incisors, frequently with two molars affected by MIH (41.1%). There was no statically significant difference in the mean of fluorescence and area of lesion between groups over the studied time. We observed no favorable effect on the remineralization of MIH lesions in anterior teeth after four applications of fluoride varnish.

Bone-Breaking Bite Force of Basilosaurus isis (Mammalia, Cetacea) from the Late Eocene of Egypt Estimated by Finite Element Analysis

PubMed Central

Snively, Eric; Fahlke, Julia M.; Welsh, Robert C.

2015-01-01

Bite marks suggest that the late Eocence archaeocete whale Basilosaurus isis (Birket Qarun Formation, Egypt) fed upon juveniles of the contemporary basilosaurid Dorudon atrox. Finite element analysis (FEA) of a nearly complete adult cranium of B. isis enables estimates of its bite force and tests the animal’s capabilities for crushing bone. Two loadcases reflect different biting scenarios: 1) an intitial closing phase, with all adductors active and a full condylar reaction force; and 2) a shearing phase, with the posterior temporalis active and minimized condylar force. The latter is considered probable when the jaws were nearly closed because the preserved jaws do not articulate as the molariform teeth come into occulusion. Reaction forces with all muscles active indicate that B. isis maintained relatively greater bite force anteriorly than seen in large crocodilians, and exerted a maximum bite force of at least 16,400 N at its upper P3. Under the shearing scenario with minimized condylar forces, tooth reaction forces could exceed 20,000 N despite lower magnitudes of muscle force. These bite forces at the teeth are consistent with bone indentations on Dorudon crania, reatract-and-shear hypotheses of Basilosaurus bite function, and seizure of prey by anterior teeth as proposed for other archaeocetes. The whale’s bite forces match those estimated for pliosaurus when skull lengths are equalized, suggesting similar tradeoffs of bite function and hydrodynamics. Reaction forces in B. isis were lower than maxima estimated for large crocodylians and carnivorous dinosaurs. However, comparison of force estimates from FEA and regression data indicate that B. isis exerted the largest bite forces yet estimated for any mammal, and greater force than expected from its skull width. Cephalic feeding biomechanics of Basilosaurus isis are thus consistent with habitual predation. PMID:25714832

Association between self-reported bruxism activity and occurrence of dental attrition, abfraction, and occlusal pits on natural teeth.

PubMed

Tsiggos, Nikolaos; Tortopidis, Dimitrios; Hatzikyriakos, Andreas; Menexes, George

2008-07-01

It is unclear whether subjects who report tooth clenching and/or grinding have more noticeable clinical signs of dental attrition, abfractions, and occlusal pits on their natural teeth than subjects who do not report bruxism activity. The purpose of this study was to determine whether there was an association between self-reported (or not reported) bruxism activity and occurrence of dental attrition (anterior, posterior), abfractions, and occlusal pits on natural teeth. One hundred and two volunteer adult Greek subjects (mean age 44.6 +/-5.7 years) were classified into 2 groups (50 self-reported bruxers and 52 nonbruxers) according to 2 inquires regarding grinding and/or clenching of their teeth. Dental attrition (anterior, posterior) was assessed by 2 calibrated experienced examiners on diagnostic casts on a tooth-by-tooth basis, using a previously well established ordinal scale. Abfraction lesions (V-shaped, in the cervical region) and occlusal pits were recorded if these clinical signs were found on at least 2 natural teeth. Statistical comparisons between the 2 groups relative to the distribution of the occurrence of the 4 clinical signs were performed by means of the exact version of the chi-square test. The Fisher's exact test was used for the comparison of percentages. The intra- and interexaminer reliability was assessed by means of the Cohen's kappa coefficient (alpha=.05). The results demonstrated that there was a significant association between self-reported bruxism and occurrence of the 4 clinical signs. Although the 2 groups were significantly different according to the distribution of the 4 clinical signs, the greatest differences occurred for the anterior and posterior attrition signs. In this study, the occurrence of 4 clinical signs (posterior or anterior dental attrition, abfractions, and occlusal pits) was associated with self-reported bruxers. It is suggested that, primarily, signs of dental attrition may differentiate self-reported bruxers from nonbruxer subjects.

Evaluation of the performance of orthodontic devices using FBG sensors

NASA Astrophysics Data System (ADS)

Carvalho, L.; Roriz, P.; Frazão, O.; Marques, M. B.

2015-04-01

Cross-bite, as a malocclusion effect, is defined as a transversal changing of the upper dental arch, in relation to the lower arch, and may be classified as skeletal, dental or functional. As a consequence, the expansion of maxilla is an effective clinical treatment used to correct transversal maxillary discrepancy. The maxillary expansion is an ancient method used in orthodontics, for the correction of the maxillary athresia with posterior crossbite, through the opening of the midpalatal suture (disjunction), using orthodontic- orthopaedic devices. Same controversial discussion arises among the clinicians, about the effects of each orthodontic devices as also about the technique to be employed. The objective of this study was to compare the strain field induced by two different orthodontic devices, named disjunctor with and without a connecting bar, in an acrylic model jaw, using fiber Bragg grating sensors to measure the strain patterns. The orthodontic device disjunctor with the bar, in general, transmits higher forces and strain to teeth and maxillae, than with the disjunctor without bar. It was verified that the strain patterns were not symmetric between the left and the right sides as also between the posterior and anterior regions of the maxillae. For the two devices is also found that in addition a displacement in the horizontal plane, particularly in posterior teeth, also occurs a rotation corresponding to a vestibularization of the posterior teeth and their alveolar processes.

Saurida lessepsianus a new species of lizardfish (Pisces: Synodontidae) from the Red Sea and Mediterranean Sea, with a key to Saurida species in the Red Sea.

PubMed

Russell, Barry C; Golani, Daniel; Tikochinski, Yaron

2015-05-12

Saurida lessepsianus n. sp., a lizardfish (Aulopiformes: Synodontidae) from the Red Sea and Mediterranean Sea, previously misidentified as S. undosquamis (Richardson) and more recently as S. macrolepis Tanaka, is described as a new species. It is characterised by the following combination of characters: dorsal fin with 11-12 rays; pectoral fins with 13-15 rays; lateral-line scales 47-51; transverse scale rows above lateral line 4½, below lateral line 5½; pectoral fins moderately long (extending to between just before or just beyond a line from origin of pelvic fins to origin of dorsal fin); 2 rows of teeth on outer palatines; 0-2 teeth on vomer; tongue with 3-6 rows of teeth posteriorly; caudal peduncle slightly compressed (depth a little more than width); upper margin of caudal fin with row of 3-8 (usually 6 or 7) small black spots; stomach pale grey to blackish anteriorly; intestine whitish. The species is common in the Red Sea and as a result of Lessepsian migration through the Suez Canal, it is now widely distributed in the eastern Mediterranean. The taxonomic status of two other Red Sea nominal species, Saurus badimottah Rüppell [= Saurida tumbil (Bloch)] and Saurida sinaitica Dollfus in Gruvel (a nomen nudum), is clarified. A key is provided for the species of Saurida in the Red Sea.

Guided Endodontics: a novel treatment approach for teeth with pulp canal calcification and apical pathology.

PubMed

Krastl, Gabriel; Zehnder, Marc S; Connert, Thomas; Weiger, Roland; Kühl, Sebastian

2016-06-01

To present a new treatment approach for teeth with pulp canal calcification (PCC) which require root canal treatment. A 15-year-old male patient presented with pain of his upper right central incisor. The tooth showed signs of apical periodontitis. Due to PCC, location of the root canal was judged to be difficult and associated with a high risk of perforation. A cone beam computed tomography (CBCT) and an intra-oral surface scan were performed and matched using software for virtual implant planning. After planning the position of the drill for root canal location, a virtual template was designed, and the data were exported as an STL file and sent to a 3D printer for template fabrication. The template was positioned on the anterior maxillary teeth. A specific drill was used to penetrate through the obliterated part of the root canal and obtain minimally invasive access to the apical part. The root canal was accessible at 9 mm distance from the apex. Further root canal preparation was carried out using an endodontic rotary instrumentation system. After an interappointment dressing for 4 weeks, the root canal was filled with vertically condensed gutta-percha using an epoxy sealer. The access cavity was restored with a composite material. After 15 months, the patient was clinically asymptomatic with no pain on percussion. The radiograph showed no apical pathology. The presented guided endodontic approach seems to be a safe, clinically feasible method to locate root canals and prevent root perforation in teeth with PCC. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Esthetic restorations of maxillary anterior teeth with orthodontic treatment and porcelain laminate veneers: a case report.

PubMed

Moon, Ji-Eun; Kim, Sung-Hun; Han, Jung-Suk; Yang, Jae-Ho; Lee, Jai-Bong

2010-06-01

If orthodontists and restorative dentists establish the interdisciplinary approach to esthetic dentistry, the esthetic and functional outcome of their combined efforts will be greatly enhanced. This article describes satisfying esthetic results obtained by the distribution of space for restoration by orthodontic treatment and porcelain laminate veneers in uneven space between maxillary anterior teeth. It is proposed that the use of orthodontic treatment for re-distribution of the space and the use of porcelain laminate veneers to alter crown anatomy provide maximum esthetic and functional correction for patients with irregular interdental spacing.

Managing the maxillary partially edentulous patient with extensive anterior tooth loss and advanced periodontal disease using a removable partial denture: a clinical report.

PubMed

Ma, Polly S; Brudvik, James S

2008-10-01

The treatment modality, a continuous occlusal rest removable partial denture, not only restored missing teeth but also stabilized the remaining dentition in a patient with advanced periodontal attachment loss. By engaging the guiding planes at the mesial surfaces of the abutments anteriorly and also the distal surfaces of the abutments posteriorly, the remaining teeth, with varying amounts of mobility, were splinted together by the framework. This conservative treatment option allows flexibility for easy repair during the life span of the prosthesis.

Treatment planning of implants in posterior quadrants.

PubMed

Jivraj, S; Chee, W

2006-07-08

Differences in anatomy and biomechanics make treatment of posterior quadrants with dental implants substantially different to that of anterior areas. Without implants, when posterior teeth were lost, treatment options included a long span fixed partial denture or a removable prosthesis, especially when no terminal abutment was available. Today, with the use of implants, options are available that allow preservation of unrestored teeth.(1) When teeth are missing, implant supported restorations can be considered the treatment of choice from the perspective of occlusal support, preservation of adjacent teeth and avoidance of a removable partial denture.

Overjet and overbite analysis during the eruption of the upper permanent incisors.

PubMed

Cuoghi, Osmar A; Sella, Rodrigo C; Mamede, Igo; de Macedo, Fernanda A; Miranda-Zamalloa, Yésselin M; de Mendonça, Marcos R

2009-01-01

ABSTRACT The purpose of this study was to analyze the overjet and overbite behavior during eruption of the upper permanent incisors. Fourth-eight plaster casts of 16 patients from ages 6-13 years were appraised longitudinally. It was found that the overjet remains constant, starting at the eruption of the upper permanent central incisors until eruption of the upper permanent canine teeth, while the overbite increases after eruption of the upper permanent lateral incisors and remains constant with the eruption of the canine teeth.

Three-dimensional finite element analysis of the application of attachment for obturator framework in unilateral maxillary defect.

PubMed

Sun, J; Jiao, T; Tie, Y; Wang, D-M

2008-09-01

The aim of this study was to evaluate the stress on the abutment teeth and framework ina unilateral maxillary defect which was restored by an obturator retained by resin-bonded extra coronal attachment. A three-dimensional finite element model of the human unilateral maxillary defect was constructed. Traditional obturator framework with four casting circumferential clasp was established (model 1). A continuous lingual guide plane of 0.5 mm thickness on all of the remaining teeth, with Mini-SG/F attachment on the mesial surface of the central incisor was also established (model 2). The modelling and analytical processes were performed using the ANSYS technologies. Stress was transmitted to the anterior part of the palate, with stress values being lower on the anterior teeth compared with the posteriors. The highest stress value of model 1 and model 2 was 13.1 Mpa, 19.9 Mpa respectively. Stress concentrations were found at the junction of the attachment to the lingual guide plane and the anterior part of the lingual plane. The results of this study suggest that the application of a resin-bonded extra coronal attachment for obturator retention is in accordance with the design principles for the restorative treatment of maxillary defects.The design of the attachment framework needs to be further investigated. Benefit can be gained by splinting the abutment teeth.

Prevalence of white spot lesion formation during orthodontic treatment.

PubMed

Julien, Katie C; Buschang, Peter H; Campbell, Phillip M

2013-07-01

To quantify the prevalence of white spot lesions (WSLs) on the anterior teeth and, secondarily, to evaluate risk factors and predictors. Digital photographs and records of 885 randomly chosen patients were evaluated before and after treatment. Chart information included gender, age, as well as banding and debanding dates. Fluorosis and oral hygiene before and after treatment were also evaluated. Preexisting and posttreatment WSLs were recorded and compared for all 12 anterior teeth. Risk ratios (RR) and absolute risk (AR) were calculated to determine the likelihood and risk of WSL formation. Overall, 23.4% of the patients developed at least one WSL during their course of treatment. Maxillary anterior teeth were affected more than mandibular teeth. The maxillary laterals and canines and the mandibular canines were the most susceptible. There was no significant difference in WSLs between genders. Fluorosis, treatment time in excess of 36 months, poor pretreatment hygiene, hygiene changes during treatment, and preexisting WSLs were all significantly (P < .05) related to the development of WSLs. The highest risk of developing WSLs was associated with preexisting WSLs (RR = 3.40), followed by declines in oral hygiene during treatment (RR = 3.12) and poor pretreatment oral hygiene (RR = 2.83). Nearly 25% of the patients developed WSLs while in treatment, depending on fluorosis, treatment time, preexisting WSLs, and oral hygiene. Orthodontists need to be mindful of these risk factors when making treatment decisions.

Prediction of Difficult Laryngoscopy in Obese Patients by Ultrasound Quantification of Anterior Neck Soft Tissue1

PubMed Central

Ezri, T.; Gewürtz, G.; Sessler, D.I.; Medalion, B.; Szmuk, P.; Hagberg, C.; Susmallian, S.

2005-01-01

Prediction of difficult laryngoscopy in obese patients is challenging. In 50 morbidly obese patients, we quantified the neck soft tissue from skin to anterior aspect of trachea at the vocal cords using ultrasound. Thyromental distance <6 cm, mouth opening <4 cm, limited neck mobility, Mallampati score >2, abnormal upper teeth, neck circumference >45 cm, and sleep apnoea were considered predictors of difficult laryngoscopy. Of the nine (18%) difficult laryngoscopy cases, seven had obstructive sleep apnoea history; whereas, only 2 of the 41 easy laryngoscopy patients did (P<0.001). Difficult laryngoscopy patients had larger neck circumference [50 (3.8) vs. 43.5 (2.2) cm; P<0.001] and more pre-tracheal soft tissue [28 (2.7) mm vs. 17.5 (1.8) mm; P<0.001] [mean (SD)]. Soft tissue values completely separated difficult and easy laryngoscopies. None of the other predictors correlated with difficult laryngoscopy. Thus, an abundance of pretracheal soft tissue at the level of vocal cords is a good predictor of difficult laryngoscopy in obese patients. PMID:14616599

Teeth eruption in children with normal occlusion and malocclusion.

PubMed

Legović, Mario; Legović, Asja; Slaj, Martina; Mestrović, Senka; Lapter-Varga, Marina; Slaj, Mladen

2008-06-01

The aim of this study was to assess the differences in eruption of permanent teeth (C, P1, P2 and M2) in a group of children with and without malocclusion. A sample of 1758 children (921 boys and 837 girls), aged 8-13 was randomly selected. The subjects were grouped by chronological age (11 groups) and by presence of malocclusion. Statistically significant differences were found for both, upper and lower canines in the age group 11 (p<0.01). Statistically significant difference was found in the age group 8.5 for upper first (p<0.05), upper second premolars (p<0.01) in the age group 10, and the lower second premolars in the age group 11 (p<0.05). Premature loss of deciduous teeth caused early eruption of succedaneus permanent teeth, possibly leading to development of a malocclusion.

Gingival Zenith Positions and Levels of Maxillary Anterior Dentition in Cases of Bimaxillary Protrusion: A Morphometric Analysis.

PubMed

Gowd, Snigdha; Shankar, T; Chatterjee, Suravi; Mohanty, Pritam; Sahoo, Nivedita; Baratam, Srinivas

2017-08-01

To investigate the two clinical parameters, such as gingival zenith positions (GZPs) and gingival zenith levels (GZLs), of maxillary anterior dentition in bimaxillary protrusion cases and collate it with severiety of crown inclination. Gingival zenith position and GZL in 40 healthy patients (29 females and 11 males) with an average age of 21.5 years were assessed. Inclusion criteria involved absence of periodontal diseases, Angle's class I molar relationship, and upper anterior proclination within 25 to 45° based on Steiner's analysis; exclusion criteria included spacing, crowding, anterior restoration and teeth with incisor attrition or rotation. The GZP was evaluated using digital calipers from voxel-based morphometry (VBM), and GZL was assessed from the tangent drawn from GZP of central incisor and canines to the linear vertical distance of GZP of lateral incisor. All the central incisors showed a GZP distal to VBM with a mean average of 1 mm. Severe proclination between 40 and 45° showed a statistically significant variation. Lateral incisors displayed a mean of 0.5 mm deviation of GZP from the vertically bisected midline. In 80% of canine population, GZP was centralized. We conclude that the degree of proclination of maxillary anterior dentition was correlated to the gingival contour in bimaxillary cases. The investigation revealed that there is a variation in the location of GZP as the severity of proclination increases. This study highlights the importance of microesthetics in fixed orthodontic treatment. The gingival contour should be unaltered while retraction during management of bimaxillary protrusion.

Malocclusion of teeth (image)

MedlinePlus

Occlusion refers to the alignment of teeth and the way that the upper and lower teeth fit together (bite). Malocclusion is the most common reason for referral to an orthodontist. Most malocclusion is mild enough not to ...

Survival of Implants in Immediate Extraction Sockets of Anterior Teeth: Early Clinical Results.

PubMed

Sabir, Mohammad; Alam, Mohammad Nazish

2015-06-01

The aims and objectives of this study were placement of implants in freshly extracted sockets of anterior teeth and to evaluate the implant stability, peri-implant radiolucency and gingival inflammation around implant over a short period of 30 months. A total of 12 patients (8 male and 4 female), ranging in the age from 20 to 50 years, from March 2007 to June 2007, were evaluated for immediate implant placement into 22 fresh extraction sockets. Only maxillary and mandibular anterior teeth/roots (central incisors, lateral incisors and canines) were considered for replacement with implants. One piece implant with integrated abutment and integrated surface, non-submerged, threaded and tapered at apical 5 mm, sand-blasted and acid etched surfaced implants (HI-TEC TRX-OP Implants of Life Care Company) were used. The mobility was not present in any of the implants at all the follow up visits. There were 2 implants at 6 month, 1 implant at 12 month, 1 implant at 18 month visits, showing peri-implant radiolucency at some sites at bone to implant contact site. Severe gingival inflammation was not observed in any of the implant site. At every follow-up visit, every implant met the criteria of success and none was found to be failed over a 30 months duration i.e. 100% success rate was achieved by implants in immediate extraction socket. The success rate of implant survival in this study was found 100%. These implants have fulfilled all the criteria of implant success and based on the defined criteria, the success rate of implants placed in immediate extraction sockets of anterior teeth compared favorably with the conventional implants. The early results of the present study showed that high survival rates with the implants in immediate extraction sockets can be achieved.

A new squamate lizard from the Upper Cretaceous Adamantina Formation (Bauru Group), São Paulo State, Brazil.

PubMed

Nava, William R; Martinelli, Agustín G

2011-03-01

The record of non-mosasaur squamates (Reptilia, Squamata) is sparse in the Cretaceus fossil record of Brazil and include six putative reports, three from the Aptian-Albian of the Araripe Basin (Tijubina pontei Bonfim-Júnior and Marques, Olindalacerta brasiliensis Evans and Yabumoto, and a lizard indet.) and three from the Upper Cretaceous of the Bauru Group (Pristiguana brasiliensis Estes and Price, Anilioidae gen. et sp. indet., and Squamata gen. et sp. indet.). In this contribution, a new genus and species of lizard, Brasiliguana prudentis gen. et sp. nov., is described based on an isolated left maxilla with teeth. The material was discovered in an outcrop of the Upper Cretaceous Adamantina Formation (Bauru Group) located in the proximity of Presidente Prudente Municipality, São Paulo State, Brazil. The new taxon is considered a basal non-Priscagamidae+Acrodonta iguanian based on the presence of a weakly inclined anterior margin of the maxillary nasal process and maxillary tooth shape and tooth implantation similar to that of iguanians rather than of other lizard groups (e.g. teiids). This finding significantly increases the squamate lizard diversity of South America, which is still poorly understood and sparsely represented in the fossil record.

Conservative orthodontic-prosthodontic approach for excessive gingival display: A clinical report.

PubMed

del Castillo, Rafael; Hernández, Ana M; Ercoli, Carlo

2015-07-01

A differential diagnosis of excessive gingival display is critical in determining appropriate treatment options and sequence. Anterior tooth malposition for patients with deep vertical overlap has been suggested as one of the 3 main causes of excessive gingival display. Specifically, patients with Angle class II, division 2 malocclusions show an occlusal scheme that might be responsible for additional anterior tooth wear when compared with individuals without malocclusion. In the long term, this condition can cause dentoalveolar compensation and overeruption of maxillary incisors with concomitant coronal movement of the gingival margin with excessive gingival display. A combined orthodontic and restorative treatment was proposed as a conservative treatment to reposition maxillary anterior teeth and their gingival margins to a more ideal position and create the necessary interocclusal restorative space to restore worn teeth with ceramic restorations, enhance dental and facial esthetics, and reestablish anterior guidance. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

[Incidence of combination syndrome based on the orthopantomograms made between 2009 és 2014 at the Department of Prosthodontics, University of Pécs, Hungary].

PubMed

Markovics, Dóra; Szendi, Róbert; Vicko, Kristina; Rajnics, Zsolt; Marada, Gyula; Radnai, Márta

2016-03-01

The treatment of patients having a completely edentulous maxillary arch and lower anterior teeth present is frequent in the dental practice. In these cases some specific changes can be detected in the oral cavity and on orthopantomograms. These signs were summarized and described first by Kelly (1972). Aim of the study was to examine the presence of the specific signs of the combination syndrome among the patients between 2009 and 2014. With the help of the electronic patient registry system used by the University of Pécs, 319 patients were filtered who were diagnosed with anodontia code (K0000 International Classification of Diseases (ICD)) in the examined period. 220 patients' orthopantomograms were evaluated searching for specific symptoms of the combination syndrome. 34 patients had complete edentulous maxilla and anterior teeth in the mandible. 4 patients (11.7%) showed the main sign of the combination syndrome, i.e. the maxillary anterior bone loss. Hypertrophy of maxillary tuberosity (9 cases, 26.4%), extrusion of the lower anterior teeth (6 cases, 17.6%) and great resorption of the distal mandibular ridge (16 cases, 47%) was diagnosed on the X-rays. The clinical examination of three patients supported the radiological findings. The combination syndrome was detectable, but the incidence rate was lower in this population in comparison with the data available in dental scientific publications.

Dental erosion: understanding this pervasive condition.

PubMed

Almeida e Silva, Júnio S; Baratieri, Luiz Narciso; Araujo, Edson; Widmer, Nicolas

2011-08-01

Dental erosion is a contemporary disease, mostly because of the change of the eating patterns that currently exist in society. It is a "silent" and multifactorial disease, and is highly influenced by habits and lifestyles. The prevalence of dental erosion has considerably increased, with this condition currently standing as a great challenge for the clinician, regarding the diagnosis, identification of the etiological factors, prevention, and execution of an adequate treatment. This article presents a dental erosion review and a case report of a restorative treatment of dental erosion lesions using a combination of bonded ceramic overlays to reestablish vertical dimension and composite resin to restore the worn palatal and incisal surfaces of the anterior upper teeth. Adequate function and esthetics can be achieved with this approach. © 2011 Wiley Periodicals, Inc.

Transdisciplinary treatment of Class III malocclusion using conventional implant-supported anchorage: 10-year posttreatment follow-up

PubMed Central

Rinaldi, Mariana Roennau Lemos; Rizzatto, Susana Maria Deon; de Menezes, Luciane Macedo; Polido, Waldemar Daudt; de Lima, Eduardo Martinelli Santayanna

2015-01-01

INTRODUCTION: Combined treatment offers advantages for partially edentulous patients. Conventional implants, used as orthodontic anchorage, enable previous orthodontic movement, which provides appropriate space gain for crown insertion. OBJECTIVE: This case report describes the treatment of a 61-year and 10-month-old patient with negative overjet which made ideal prosthetic rehabilitation impossible, thereby hindering dental and facial esthetics. CASE REPORT: After a diagnostic setup, conventional implants were placed in the upper arch to anchor intrusion and retract anterior teeth. Space gain for lateral incisors was achieved in the lower arch by means of an orthodontic appliance. CONCLUSIONS: Integrated planning combining Orthodontics and Implantology provided successful treatment by means of conventional implant-supported anchorage. The resulting occlusal relationship proved stable after 10 years. PMID:26154459

An In Vitro Comparison of Non-Vital Bleaching Techniques in the Discolored Tooth.

DTIC Science & Technology

1981-03-01

Thirty-nine extracted anterior teeth with intact crowns were immersed in 5.25% sodium hypochlorite solution for approximately eight hours to loosen...tooth" model described previously was utilized.10 The experimental teeth with lingual access openings were placed in 5.25% sodium hypochlorite ...time was highly significant (p<O.O000). The bleaching of discolored non-vital teeth is an important phase of endodontic therapy. Bleaching is an attempt

An in vivo comparison of antimicrobial efficacy of sodium hypochlorite and Biopure MTAD™ against enterococcus faecalis in primary teeth: A qPCR study.

PubMed

Tulsani, S G; Chikkanarasaiah, N; Bethur, S

2014-01-01

Biopure MTAD™, a new root canal irrigant has shown promising results against the most common resistant microorganism, E. faecalis, in permanent teeth. However, there is lack of studies comparing its antimicrobial effectiveness with NaOCl in primary teeth. The purpose of this study was to compare the in vivo antimicrobial efficacy of NaOCl 2.5% and Biopure MTAD™ against E. faecalis in primary teeth. Forty non vital single rooted primary maxillary anterior teeth of children aged 4-8 years, were irrigated either with NaOCl 2.5% (n=15), Biopure MTAD™ (n=15) and 0.9% Saline (n=10, control group). Paper point samples were collected at baseline (S1) and after chemomechanical preparation (S2) during the pulpectomy procedure. The presence of E. faecalis in S1 & S2 was evaluated using Real time Polymerase Chain Reaction. Statistical significant difference was found in the antimicrobial efficacy of NaOCl 2.5 % and BioPure MTAD™ when compared to saline (p>0.05). However, no statistical significant difference was found between the efficacies of both the irrigants. NaOCl 2.5% and BioPure MTAD™, both irrigants are equally efficient against E. faecalis in necrotic primary anterior teeth. MTAD is a promising irrigant, however clinical studies are required to establish it as ideal root canal irrigant in clinical practice.

Esthetic Concerns and Acceptability of Treatment Modalities in Primary Teeth: A Comparison between Children and Their Parents

PubMed Central

Saffan, Abdulrahman Al; AlHobail, Sultan; Bin Salem, Fares; AlFuraih, AlBara; AlTamimi, Mohammad

2016-01-01

Background and Aim. Esthetic concerns in primary teeth have been studied mainly from the point of view of parents. The aim of this study was to study compare the opinions of children aged 5–8 years to have an opinion regarding the changes in appearance of their teeth due to dental caries and the materials used to restore those teeth. Methodology. A total of 107 children and both of their parents (n = 321), who were seeking dental treatment, were included in this study. A tool comprising a questionnaire and pictures of carious lesions and their treatment arranged in the form of a presentation was validated and tested on 20 children and their parents. The validated tool was then tested on all participants. Results. Children had acceptable validity statistics for the tool suggesting that they were able to make informed decisions regarding esthetic restorations. There was no difference between the responses of the children and their parents on most points. Zirconia crowns appeared to be the most acceptable full coverage restoration for primary anterior teeth among both children and their parents. Conclusion. Within the limitations of the study it can be concluded that children in their sixth year of life are capable of appreciating the esthetics of the restorations for their anterior teeth. PMID:27446212

An electromyographic study of aspects of 'deprogramming' of human jaw muscles.

PubMed

Donegan, S J; Carr, A B; Christensen, L V; Ziebert, G J

1990-11-01

Surface electromyograms from the right and left masseter and anterior temporalis muscles were used to detect peripheral correlates of deprogramming, also known as programming and reprogramming, of jaw elevator muscles. Putative deprogramming was attempted through the clinically recommended use of a leaf gauge, placed for 15 min between the maxillary and mandibular anterior teeth and disoccluding the posterior teeth by about 2 mm. Studied contractile activities were those of postural activity (subconscious, semi-isometric, minimal activity) and intercuspal teeth clenching (conscious, isometric, maximal activity). Use of the leaf gauge did not affect normalized postural activity (about 4%), the duration (about 900 ms) and static work efforts of clenching (about 1200 microV.s), the time to peak mean voltage of clenching (about 400 ms), and the peak mean voltage of clenching (about 300 microV). Activity and asymmetry indices showed that the studied motor innervation patterns were not changed by the leaf gauge.

Aesthetic Rehabilitation of Discoloured Nonvital Anterior tooth with Carbamide Peroxide Bleaching: Case Series

PubMed Central

Badole, Gautam P; Warhadpande, Manjusha M; Bahadure, Rakesh N; Badole, Shital G

2013-01-01

Discolouration of teeth, especially the anteriores, can result in considerably cosmetic impairment in person. Combine effects of intrinsic and extrinsic colour determines the appearance of teeth. Whitening of teeth with bleaching is a more conservative therapeutic method than full crowns, veneers or composite restorations which is more invasive and expensive. Among bleaching techniques, in office bleaching with carbamide peroxide provide superior aesthetic result in short period of time with no adverse effects. This paper presents case series of tooth discolouration in non-vital tooth which was successfully bleached using 35 % carbamide peroxide. After 1 year follow up the prognosis was good with no reversal of tooth discolouration. This case report allows the better understanding of the concept of nonvital tooth bleaching with carbamide peroxide which gives a non-invasive alternative for aesthetic purpose in preserving the natural tooth structure. PMID:24551731

Effectiveness of Rotary Endodontic Instruments on Smear Layer Removal in Root Canals of Primary Teeth: A Scanning Electron Microscopy Study.

PubMed

Subramaniam, Priya; Girish Babu, K L; Tabrez, T A

2016-01-01

The present SEM study was undertaken to evaluate the effect of root canal instrumentation using both manual and rotary files in the root canals of primary anterior teeth. Thirty freshly extracted primary maxillary incisors were divided into 3 groups of 10 teeth each. In Group I, root canals were instrumented with rotary NiTi files; in Group II, the root canals were instrumented using manual NiTi K files and; in Group III, manual instrumentation was done with stainless steel K files. Longitudinal sections were prepared and processed for observation under SEM at the coronal, middle and apical thirds. Scoring of smear layer was done according to Hulsmann and the data obtained was subjected to statistical analysis. Rotary files cleaned the coronal and middle thirds of root canals more effectively. Statistically there was no significant difference between the groups. Lowest score of 2.6 in the apical third of root canals was seen with hand NiTi files. Rotary instrumentation was as effective as manual instrumentation in removal of smear layer in the root canals of primary anterior teeth.

The oral health of upper income Americans.

PubMed

Bailit, Howard; Lim, Sungwoo; Ismail, Amid

2016-06-01

Limited information is available on the oral health status of upper income Americans (>400 percent of the FPL). They constitute 33 percent of the population and account for 53 percent of dental expenditures. Using 1999-2004 NHANES data, we examined differences in the mean number and percentage of decayed and filled permanent surfaces and missing teeth among age and family income groups. For upper income Americans, across age groups, the mean number of untreated decayed surfaces and missing teeth ranged from 0.2 to 0.5 and 2.6 to 3.3, respectively. The mean number of restored surfaces was low in children but extensive in adults. Income disparities increased with increasing age. Overall, upper income Americans have good oral health. Relatively few have untreated decayed surfaces or missing teeth. The reasons for the large number of restored surfaces in upper income adults require further research. Most upper income Americans are in good oral health, especially the 12-18 year cohort. As this group ages, the oral health of upper income adults is expected to improve. © 2015 American Association of Public Health Dentistry.

Width/Length Ratio in Maxillary Anterior Teeth. Comparative Study of Esthetic Preferences among Professionals and Laypersons.

PubMed

Álvarez-Álvarez, Lorena; Orozco-Varo, Ana; Arroyo-Cruz, Gema; Jiménez-Castellanos, Emilio

2017-05-17

Many studies have examined the esthetic preferences of professionals in the maxillary anterior region; however, only a few have taken into account the ratios that are more frequent within the population or other ratios suggested in the literature as ideal. Previous studies also failed to compare them with the esthetic preferences of the lay population with regards to the smile. The purpose of this study is to highlight the differences when perceiving the esthetics of smiles between general dentists and laypersons, and linking them with the width/length of the maxillary anterior teeth. Photographs of the full face of a female subject were modified with Photoshop CS regarding the length/width relationships of the 6 maxillary anterior teeth. The three modifications made were: (a) 80% length/width, (b) 85%, length/width, and (c) 85% length/width in central incisors, 80% length/width in lateral incisors and canines. Three sequences of photograph pairs were created with different ratios and presented in PowerPoint to a sample of 100 general dentists and 100 laypersons. The ratio considered as the most esthetic by the majority of the judges was 85% for central incisors and 80% for lateral incisors and canines, with a statistically significant difference (p < 0.01). There was no statistically significant difference in the esthetic preferences of the studied populations either due to gender or professional experience of the dentists (p > 0.01). According to the results obtained in this study, professionals and laypersons considered a width/length ratio of 85% for maxillary central incisors and 80% for lateral incisors and canines as the most esthetic for maxillary anterior teeth. These results do not support findings from other studies previously published with similar ratios in central incisors, lateral incisors, and canines. Today clinicians practice in a treatment environment where not only function and utility but also esthetics is demanded in almost every procedure. Restoring/maintaining function is considered essential in any restorative dentistry treatment, but the esthetic aspects of any treatment should never be forgotten. This study was motivated by the increasing importance of obtaining a better appreciation of the perception of smile beauty, and of the role of maxillary teeth width/length ratio on the perception of dental esthetics. © 2017 by the American College of Prosthodontists.

Improved pathologic teeth migration following gingivectomy in a case of idiopathic gingival fibromatosis.

PubMed

Seki, Keisuke; Sato, Shuichi; Asano, Yukhiro; Akutagawa, Hideyasu; Ito, Koichi

2010-01-01

A case is reported of a 20-year-old woman with generalized severe gingival overgrowth covering almost all of the teeth with diastemata, diagnosed as idiopathic gingival fibromatosis. After initial therapy, the patient underwent surgery consisting of a full-mouth internal beveled gingivectomy. Postoperatively, the maxillary anterior teeth spontaneously moved to almost optimal positions. Removing the cause by gingivectomy can lead to spontaneous correction of the pathologic tooth migration. With supportive periodontal treatment, the patient showed no recurrence of gingival enlargement or repositioning of the teeth at the 5-year follow-up.

Comparison of Tooth Color Change After Bleaching With Conventional and Different Light-Activated Methods.

PubMed

Shahabi, Sima; Assadian, Hadi; Mahmoudi Nahavandi, Alireza; Nokhbatolfoghahaei, Hanieh

2018-01-01

Introduction: The demand for esthetic dental treatments is increasing in recent years mainly due to improved oral hygiene and better maintenance of oral health and teeth in older individuals. Bleaching of discolored anterior teeth is the most popular among esthetic dental treatments. Even individuals with sound teeth and adequate esthetics seek to have whiter teeth in the anterior region. The aim of this study was to evaluate tooth color changes following conventional in-office bleaching techniques compared to light-activated methods using different light sources. Methods: Seventy sound anterior teeth (devoided of caries and/or fracture), extracted for periodontal and orthodontic reasons were selected and allocated to 7 groups: (A) control, (B) conventional bleaching (C) LED-activated bleaching, (D) KTP laser-activated bleaching, (E) diode laser-activated bleaching, (F) Nd:YAG laser-activated bleaching and (G) CO2 laser-activated bleaching. Colorimetric evaluation was carried out before and after treatment using a spectrophotoradiometer. Data were analyzed by one- and two-way analysis of variance (ANOVA) as well as multiple comparison methods. Results: The results showed that all bleaching procedures were effective in reducing the yellowness index. However, the KTP laser-activated bleaching was significantly more effective than the other techniques in 95% confidence level. It was also seen that CO2 laser activated method has outperformed groups E, F and G and the conventional bleaching without light activation was not effective at all and represented similar results with the control group. Furthermore, the groups E and G had almost the same results in decreasing the yellowness index. Conclusion: The results showed that all bleaching techniques were effective however, the KTP laser-activated bleaching was significantly more efficient, closely followed by the CO2 laser-activated bleaching technique.

Vertical dimensional stability and rigidity of occlusal registration materials.

PubMed

Walker, Mary P; Wu, Edis; Heckman, M Elizabeth; Alderman, Nicholas

2009-01-01

Dimensionally accurate occlusal registration records are essential for restorative dentistry; moreover, since records are not used immediately or may be used more than once, the registration material should exhibit accuracy over time (a concept known as dimensional stability). It has been speculated that materials with increased hardness or rigidity should produce more accurate registration records due to an increased resistance to distortion. This study compared the rigidity and associated dimensional accuracy of a recently marketed bisacrylic occlusal registration material and a vinyl polysiloxane (VPS). Maxillary and mandibular typodont arches were mounted on a plasterless articulator from which teeth No. 3, 13, and 15 had been removed to simulate edentulous spaces. After preparing teeth No. 2, 4, 12, and 14 as bridge abutments, the remaining teeth were equilibrated selectively to produce even anterior contact. Four digital photographs were taken to make vertical interarch measurements at four locations (teeth No. 3, 7, 10, and 14). Following initial photos (controls), 10 interocclusal records were made using each registration material, with material placed only in the segments in which teeth were prepared. The records were used for mounting the maxillary arch against the mandibular arch after 48, 72, and 120 hours. There were significant effects on vertical dimensional change related to arch location, material, and mounting time. Both materials demonstrated significantly larger posterior vertical openings than anterior vertical openings, while the bisacrylate produced a larger posterior opening than VPS at 48 and 72 hours and a larger anterior opening at all mounting times. There also was a significant difference in hardness/rigidity due to material and measurement time; at all measurement times, bisacrylate exhibited a significantly higher hardness number.

Tooth-borne distraction of the lower anterior subapical segment for correction of class II malocclusion, subsequent to genioplasty.

PubMed

Matsushita, Kazuhiro; Inoue, Nobuo; Yamaguchi, Hiro-o; Ooi, Kazuhiro; Totsuka, Yasunori

2011-09-01

Alveolar distraction is mainly used to increase height and width of the alveolar crest. This technique, however, is not typically used for lengthening the perimeter of the dental arch or improving teeth axes. We applied alveolar distraction in a tooth-borne manner in the second stage of our original method and obtained favorable results. We therefore present an outline of this method. Genioplasty was first performed to create an infrastructure for sequential advancement of the subapical alveolar segment. After bone union, anterior subapical alveolar osteotomy was performed. The stump of the osteotomized dentate segment was moved forward without changing the incisal edge position, and a box-type bioabsorbable plate with four holes was fixed only onto the dentate segment using two screws. After a latency period, two distraction devices were placed bilaterally to the brackets and activated at 1.0 mm/day. After reaching the desired position, the distractor was immobilized, and then replaced by resin temporary teeth to retain the created space. After the consolidation period, orthodontic treatment was restarted and teeth moved into the newly created space. Bimaxillary surgery was performed after completing pre-surgical orthodontic treatment. Finally, both desirable occlusion and functional masticatory function were obtained. This tooth-borne distraction system is one applicable method for patients with skeletal class II and crowding of lower anterior teeth, achieving good results particularly in combination with our original method.

Comparison of the oropharyngeal cavity in the Starksiini (Teleostei: Blenniiformes: Labrisomidae): taste buds and teeth, including a comparison with closely-related genera.

PubMed

Fishelson, Lev; Baldwin, Carole C; Hastings, Philip A

2012-06-01

The present study describes the distribution of taste buds and teeth in the oropharyngeal cavity of 13 species of adult (18-60 mm SL) Starksiini fishes inhabiting subtidal waters of the Neotropical region. Four types of taste buds described previously in other fish groups were observed within the oropharyngeal cavity, of which type I, situated on prominent protruding papillae, is the most common. The number of taste buds in this cavity varies considerably, ranging from ca. 202 in Starksia lepicoelia to ca. 770 in S. sluiteri. In all the studied species, taste buds are more numerous on the posterior (160-396) than on the anterior (42-294) part of the oropharyngeal cavity. The presence of different numbers of taste buds in different Starksiini species of the same standard length suggests that numbers of taste buds are not directly correlated with size and may be species-specific. Teeth are found on the premaxilla, dentary, vomer, palatine (in some species) and the upper and lower pharyngeal jaws (third pharyngobranchials and fifth ceratobranchials, respectively); the form and number of teeth and taste buds on each of these sites differs among the various species of Starksiini and between them and closely related species of the labrisomid tribes Labrisomini, Mnierpini, and Paraclinini. The results thus suggest potential systematic value in certain features of the oropharyngeal cavity for blenniiform fishes. It is also shown that benthic-feeding omnivorous fishes have higher densities of taste buds than piscivorous fishes. A possible correlation among numbers of taste buds, their positions in the oropharyngeal cavity, and other parameters is discussed. Copyright © 2012 Wiley Periodicals, Inc.

Strategic camouflage treatment of skeletal Class III malocclusion (mandibular prognathism) using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy.

PubMed

Seo, Yu-Jin; Lin, Lu; Kim, Seong-Hun; Chung, Kyu-Rhim; Nelson, Gerald

2016-01-01

This case report presents the camouflage treatment that successfully improved the facial profile of a patient with a skeletal Class III malocclusion using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy. The patient was an 18-year-old woman with chief complaints of crooked teeth and a protruded jaw. Camouflage treatment was chosen because she rejected orthognathic surgery under general anesthesia. A hybrid type of bone-borne rapid maxillary expander with palatal mini-implants was used to correct the transverse discrepancy, and a mandibular anterior subapical osteotomy was conducted to achieve proper overjet with normal incisal inclination and to improve her lip and chin profile. As a result, a Class I occlusion with a favorable inclination of the anterior teeth and a good esthetic profile was achieved with no adverse effects. Therefore, the hybrid type of bone-borne rapid maxillary expander and a mandibular anterior subapical osteotomy can be considered effective camouflage treatment of a skeletal Class III malocclusion, providing improved inclination of the dentition and lip profile. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Proportions of maxillary anterior teeth relative to each other and to golden standard in tabriz dental faculty students.

PubMed

Parnia, Fereydoun; Hafezeqoran, Ali; Mahboub, Farhang; Moslehifard, Elnaz; Koodaryan, Rodabeh; Moteyagheni, Rosa; Saleh Saber, Fariba

2010-01-01

Various methods are used to measure the size and form of the teeth, including the golden pro-portion, and the width-to-length ratio of central teeth, referred to as the golden standard. The aim of this study was to eval-uate the occurrence of golden standard values and golden proportion in the anterior teeth. Photographs of 100 dentistry students (50 males and 50 females) were taken under standard conditions. The visible widths and lengths of maxillary right and left incisors were calculated and the ratios were compared with golden standard. Data was analyzed using SPSS 14 software. Review of the results of the means showed statistically significant differences between the width ratio of right lateral teeth to the central teeth width with golden proportion (P<0.001). Likewise, the difference was significant for the left side, too (P<0.001). Test results of mean differences showed that the mean difference between proportion of right laterals to centrals with golden proportion was significant (P<0.001). The difference was significant for the left side, too (P<0.001). As a result, there is no golden proportion among maxillary incisors. The review of results of mean differences for single samples showed that the mean differences between the proportion of width-to-length of left and right central teeth was statistically significant by golden standard (P<0.001). Therefore, considering the width-to-length proportion of maxillary central teeth, no golden standard exists. In the evaluation of the width-to-width and width-to-length proportions of maxillary incisors no golden proportions and standards were detected, respectively.

An analysis of the timing and materials associated with pulp disease following restorative dental treatment.

PubMed

Yong, J B; Sivarajan, S; Abbott, P V

2018-05-19

To assess whether the timing of pulp disease after tooth restoration was associated with type of restorative dental material used, extent of the restoration, or tooth type. A comprehensive search and analysis of data using the Titanium Oral Health Management software program at The Oral Health Centre of Western Australia was performed to correlate procedural codes for teeth that had restorations placed and subsequently developed pulp disease requiring endodontic treatment or extraction from 1 st January 2009 to 31 st December 2013. Manual analysis of paper and/or electronic patient record cards was also performed. Data collected included restoration type, restored tooth surfaces, tooth type, and the dates of restoration and subsequent endodontic intervention or extraction. Of 330 teeth that met the inclusion criteria, 84 (26%) had composite resin restorations, 80 (24%) had amalgams, 119 (36%) had GICs and 47 (14%) had crowns. The average time between restoration and further intervention was 330 days with a range from 3 days to 1,775 days (approx. 5 years). Teeth restored with crowns or five-surface restorations were significantly more likely to require earlier intervention than other restorations. Premolar and anterior teeth were also more likely to require earlier intervention. Teeth that developed pulp disease requiring further intervention that were restored with crowns and five-surface GIC developed the disease sooner than teeth that were restored with amalgam or composite. In teeth with five surface restorations that developed pulp disease requiring further intervention, premolar and anterior teeth developed the pulp disease sooner than molars. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Mandibular anterior crowding: normal or pathological?

PubMed

Consolaro, Alberto; Cardoso, Mauricio de Almeida

2018-01-01

The teeth become very close to each other when they are crowded, but their structures remain individualized and, in this situation, the role of the epithelial rests of Malassez is fundamental to release the EGF. The concept of tensegrity is fundamental to understand the responses of tissues submitted to forces in body movements, including teeth and their stability in this process. The factors of tooth position stability in the arch - or dental tensegrity - should be considered when one plans and perform an orthodontic treatment. The direct causes of the mandibular anterior crowding are decisive to decide about the correct retainer indication: Should they be applied and indicated throughout life? Should they really be permanently used for lifetime? These aspects of the mandibular anterior crowding and their implication at the orthodontic practice will be discussed here to induct reflections and insights for new researches, as well as advances in knowledge and technology on this subject.

Three-dimensional validation of the impact of the quantity of teeth or tooth parts on the morphological difference between twin dentitions.

PubMed

Franco, A; Willems, G; Couto Souza, P H; Coucke, W; Thevissen, P

2016-07-01

The number of teeth involved in cases of bite-mark analysis is generally fewer in comparison to the number of teeth available for cases of dental identification. This decreases the amount of information available and can hamper the distinction between bite suspects. The opposite is true in cases of dental identification and the assumption is that more teeth contribute to a higher degree of specificity and the possibility of identification in these cases. Despite being broadly accepted in forensic dentistry, this hypothesis has never been scientifically tested. The present study aims to assess the impact of the quantity of teeth or tooth parts on morphological differences in twin dentitions. A sample of 344 dental casts collected from 86 pairs of twins was used. The dental casts were digitized using an automated motion device (XCAD 3D® (XCADCAM Technology®, São Paulo, SP, Brazil) and were imported as three-dimensional dental model images (3D-DMI) in Geomagic Studio® (3D Systems®, Rock Hill, SC, USA) software package. Sub samples were established based on the quantity of teeth and tooth parts studied. Pair wise morphological comparisons between the corresponding twin siblings were established and quantified. Increasing the quantity of teeth and tooth parts resulted in an increase of morphological difference between twin dentitions. More evident differences were observed comparing anterior vs. entire dentitions (p < 0.05) and complete vs. partial anterior dentitions (p < 0.05). Dental identifications and bite-mark analysis must include all the possibly related dental information to reach optimal comparison outcomes.

Profiles of muscularity in junior Olympic weight lifters.

PubMed

Kanehisa, H; Funato, K; Abe, T; Fukunaga, T

2005-03-01

This study aimed to investigate the muscularity of strength-trained junior athletes. Muscle thickness (Mt) values at 10 sites (anterior forearm, anterior upper arm, posterior upper arm, chest, abdomen, back, anterior thigh, posterior thigh, anterior lower leg, and posterior lower leg) were determined in junior Olympic weight lifters (OWL, n=7, 15.1+/-0.3 y, mean+/-SD) and non-athletes (CON, n=13, 15.1+/-0.3 y) using a brightness mode ultrasonography. Skeletal age assessed with the Tanner-Whitehouse II method (20 hand-wrist bones) was similar in OWL (16.4+/-0.7 y) and CON (16.3+/-0.6 y). At the 6 sites (anterior forearm, anterior upper arm, posterior upper arm, chest, back and anterior thigh), OWL showed significantly greater Mt values than CON even in terms of Mt relative to body mass(1/3) Mt x BM(-1/3). On the other hand, there were no significant differences between the 2 groups in the Mt ratios of the anterior to posterior site in the upper arm, thigh and lower leg and those of the back to either the chest or abdomen in the trunk. For OWL only, skeletal age was significantly correlated to Mt x BM(-1/3) at the abdomen (r=0.869, p<0.05) and anterior thigh (r=0.883, p<0.05). The findings here indicate that 1) as compared to adolescent non-athletes, junior Olympic weight lifters show a greater muscularity in the upper body and anterior thigh without predominant development in either of anterior and posterior sites within the same body segment, 2) for junior Olympic weight lifters, the muscularity of abdominal and knee extensor muscles is influenced by the biological maturation.

Tooth wear in three ethnic groups in Sabah (northern Borneo).

PubMed

Milosevic, A; Lo, M S

1996-12-01

The prevalence and associated aetiologies of tooth wear were investigated in three ethnic groups in Sabah (Northern Borneo) using the Tooth Wear Index (TWI). The number of surfaces with enamel wear only, dentine exposed for less than a third or dentine exposed for more than a third were categorised into the TW minimal, moderate or severe respectively. A structured questionnaire was used to elicit medical/dental history, oral hygiene practices, satisfaction with body image, diet and other personal habits/details. The sample comprised of a self selected sample of 148 dental hospital attenders; 47 (32 per cent) each of ethnic Chinese and Malay and 54 (36 per cent) of ethnic Kadazan, matched for age and with a similar number of scoreable teeth per subject. Dentine exposure within the total sample was a common finding (95 per cent TW with moderate, 41 per cent TW severe). The Kadazan group had significantly (P < 0.05) more surfaces with severe tooth wear than the Chinese or Malay. Tobacco chewing was positively associated (rho = +0.4, P < 0.05) with both moderate and severe tooth wear, as was the habit of crushing/eating bones. Neither carbonated beverages or fresh fruit intake were associated with tooth wear, but their frequency of consumption was low. The buccal and occlusal surfaces of the posterior teeth were the most severely worn. Generally, wear was greater in the upper anterior sextant compared to the lower anterior sextant, with the exception of the lower incisal edges in the Kadazan group. Tooth wear into dentine was a common occurrence, especially among the Kadazan subjects and least among the Chinese subjects. The aetiological factors associated with this tooth wear are different to those encountered in Western cultures.

[Chromatic study of all-ceramic crown--IPS Empress: difference of color by manufacturing technique and cements].

PubMed

Hata, Utako; Sadamitsu, Kenichiro; Yamamura, Osamu; Kawauchi, Daisuke; Fujii, Teruhisa

2004-12-01

In recent years,aesthetic appearance and function are called for and all-ceramic crowns are spreading. By choosing an all-ceramic crown the problem of metal ceramics is avoided. There are difficulties of color tone reproducibility of cervical margin and darkness of gingival margin. We examined IPS Empress also in various all-ceramic crowns. IPS Empress has high permeability a ceramic ingot of various color tones and excellent color tone reproducibility of natural teeth. Generally a layering technique is used for an anterior tooth and the staining technique is used for a molar. However the details are unknown We examined how differences of manufacturing method and cement affect the color tone of all ceramics clinically. Two kinds of Empress crown were fabricated for a 27 year-old woman's upper left-side central incisors:the staining technique of IPS Empress and the layering technique of IPS Empress II. Various try-in pastes(transparent opaque white white and yellow) of VariolinkII of the IPS Empress System were used for cementing. Color was measured using a spectrophotometer CMS 35FS. The L*a*b* color system was used for showing a color. The right-side central incisors on the opposite side of the same name teeth were used for comparison. We analyzed the color difference (DeltaE* ab)with a natural tooth. Consequently when it had no cement of staining technique and was tranceparent small values were obtained. It is considered that the color tone can be adjusted by color cement. It is effective to use the staining technique for an anterior tooth crown depending on the case. The crown manufactured using the layering technique is not easily influenced by cement. The crown manufactured by the staining technique tends to be influenced by cement.

Orbital Winch

NASA Technical Reports Server (NTRS)

Hoyt, Robert (Inventor); Slostad, Jeffrey T. (Inventor); Frank, Scott (Inventor); Barnes, Ian M. (Inventor)

2016-01-01

Orbital winch having: lower and upper frames; spool having upper and lower flanges with lower flange attached to lower frame; axial tether guide mounted to upper frame; secondary slewing ring coaxial with spool and rotatably mounted to upper frame, wherein secondary slewing ring's outer surface has gearing; upper tether guide mounted to inner surface of secondary slewing ring; linear translation means having upper end mounted to upper frame and lower end mounted on lower frame; primary slewing ring rotatably mounted within linear translation means allowing translation axially between flanges, wherein primary slewing ring's outer surface has gearing; lower tether guide mounted on primary slewing ring's inner surface; pinion rod having upper end mounted to upper frame and lower end mounted to lower frame, wherein pinion rod's teeth engage primary and secondary slewing rings' outer surface teeth; and tether passing through axial, upper, and lower tether guides and winding around spool.

Polycarbonate crowns for primary teeth revisited: restorative options, technique and case reports.

PubMed

Venkataraghavan, Karthik; Chan, John; Karthik, Sandhya

2014-01-01

Esthetics by definition is the science of beauty - that particular detail of an animate or inanimate object that makes it appealing to the eye. In the modern, civilized, and cosmetically conscious world, well-contoured and well-aligned white teeth set the standard for beauty. Such teeth are not only considered attractive but are also indicative of nutritional health, self esteem, hygienic pride, and economic status. Numerous treatment approaches have been proposed to address the esthetics and retention of restorations in primary teeth. Even though researchers have claimed that certain restorations are better than the others, particularly owing to the issues mentioned above, the search for the ideal esthetic restoration for the primary teeth continues. This paper revisits and attempts to reintroduce the full coverage restoration, namely, polycarbonate crown, for use in primary anterior teeth.

Correlation of gingival thickness with gingival width, probing depth, and papillary fill in maxillary anterior teeth in students of a dental college in Navi Mumbai.

PubMed

Singh, Jyotsna; Rathod, Varsha J; Rao, Prajakta R; Patil, Aardra A; Langade, Deepak G; Singh, Roshan K

2016-01-01

The gingival biotype is of utmost importance for esthetics and biologic function. Anatomical characteristic of periodontium such as gingival thickness (GT), width of keratinized gingiva, and alveolar bone morphology will determine the behavior of periodontium when subjected to physical, chemical, or bacterial insult or during therapeutic procedure. The aim of this study was to correlate the GT with gingival width (GW), probing depth (PD), and papillary fill (PF) in relation to maxillary anterior region. Undergraduate dental students and interns from a dental college in Navi Mumbai were enrolled in the study according to the inclusion criteria. Six teeth per subject were assessed; a total of 2178 maxillary anterior teeth were examined. Subjects were examined clinically for GT, width of keratinized gingiva, pocket depth, and interdental PF. The data obtained was tabulated and subjected to statistical analysis. Spearman's correlation analysis test was performed to find the correlation of GT with GW, PD, and PF. Positive correlation was found between GT and GW ( r = 0.241). No significant correlation could be found between GT and PD; and between GT and PF. The present study confirmed a positive correlation between GT and GW. A weak negative correlation was found between GT and PD.

Survival of Implants in Immediate Extraction Sockets of Anterior Teeth: Early Clinical Results

PubMed Central

Sabir, Mohammad

2015-01-01

Background The aims and objectives of this study were placement of implants in freshly extracted sockets of anterior teeth and to evaluate the implant stability, peri-implant radiolucency and gingival inflammation around implant over a short period of 30 months. Materials and Methods A total of 12 patients (8 male and 4 female), ranging in the age from 20 to 50 years, from March 2007 to June 2007, were evaluated for immediate implant placement into 22 fresh extraction sockets. Only maxillary and mandibular anterior teeth/roots (central incisors, lateral incisors and canines) were considered for replacement with implants. One piece implant with integrated abutment and integrated surface, non-submerged, threaded and tapered at apical 5 mm, sand-blasted and acid etched surfaced implants (HI-TEC TRX-OP Implants of Life Care Company) were used. Results The mobility was not present in any of the implants at all the follow up visits. There were 2 implants at 6 month, 1 implant at 12 month, 1 implant at 18 month visits, showing peri-implant radiolucency at some sites at bone to implant contact site. Severe gingival inflammation was not observed in any of the implant site. At every follow-up visit, every implant met the criteria of success and none was found to be failed over a 30 months duration i.e. 100% success rate was achieved by implants in immediate extraction socket. Conclusion The success rate of implant survival in this study was found 100%. These implants have fulfilled all the criteria of implant success and based on the defined criteria, the success rate of implants placed in immediate extraction sockets of anterior teeth compared favorably with the conventional implants. The early results of the present study showed that high survival rates with the implants in immediate extraction sockets can be achieved. PMID:26266220

Radiographic localization of unerupted mandibular anterior teeth.

PubMed

Jacobs, S G

2000-10-01

The parallax method and the use of 2 radiographs taken at right angles to each other are the 2 methods generally used to accurately localize teeth. For the parallax method, the combination of a rotational panoramic radiograph with an occlusal radiograph is recommended. This combination involves a vertical x-ray tube shift. Three case reports are presented that illustrate: (1) how this combination can accurately localize unerupted mandibular anterior teeth, (2) how a deceptive appearance of the labiolingual position of the unerupted tooth can be produced in an occlusal radiograph, (3) how increasing the vertical angle of the tube for the occlusal radiograph makes the tube shift easier to discern, (4) why occlusal radiographs are preferable to periapical radiographs for tube shifts, and (5) how localization can also be carried out with 2 radiographs at right angles to each other, one of which is an occlusal radiograph taken with the x-ray tube directed along the long axis of the reference tooth.

A comparative study on the stress distribution around dental implants in three arch form models for replacing six implants using finite element analysis.

PubMed

Zarei, Maryam; Jahangirnezhad, Mahmoud; Yousefimanesh, Hojatollah; Robati, Maryam; Robati, Hossein

2018-01-01

Dental implant is a method to replacement of missing teeth. It is important for replacing the missed anterior teeth. In vitro method is a safe method for evaluation of stress distribution. Finite element analysis as an in vitro method evaluated stress distribution around replacement of six maxillary anterior teeth implants in three models of maxillary arch. In this in vitro study, using ABAQUS software (Simulia Corporation, Vélizy-Villacoublay, France), implant simulation was performed for reconstruction of six maxillary anterior teeth in three models. Two implants were placed on both sides of the canine tooth region (A model); two implants on both sides of the canine tooth region and another on one side of the central incisor region (B model); and two implants on both sides of the canine tooth region and two implants in the central incisor area (C model). All implants evaluated in three arch forms (tapered, ovoid, and square). Data were analyzed by finite analysis software. Von Mises stress by increasing of implant number was reduced. In a comparison of A model in each maxillary arch, the stress created in the cortical and cancellous bones in the square arch was less than ovoid and tapered arches. The stress created in implants and cortical and cancellous bones in C model was less than A and B models. The C model (four-implant) reduced the stress distribution in cortical and cancellous bones, but this pattern must be evaluated according to arch form and cost benefit of patients.

Development of chair-side evaluation system of swallowing discomfort of denture wearers

NASA Astrophysics Data System (ADS)

Matsumoto, Keisuke; Ikuta, Ryuhei; Kataoka, Kanako; Ono, Yumie; Tamaki, Katsushi

2018-02-01

We investigated the appropriate hemodynamic parameters of functional near-infrared spectroscopy (fNIRS) to best differentiate the discomfort intensity related to swallowing in healthy subjects wearing different types of simulated dentures. Thirty-one subjects performed 4 sessions of water-swallowing task in a sitting position without or with wearing any one of the 3 simulated dentures under continuous fNIRS monitoring of the prefrontal cortex. The simulated dentures were consisted of a flat maxillary palatal bar and bilateral support attachment to the teeth and gum. The palatal bar positions were arranged along with the anterior, middle, or posterior areas of the upper jaw. The cumulative values of oxyhemoglobin and deoxyhemoglobin concentration changes were calculated for periods of 5 - 10 s from completion of swallowing. Subjective rating of swallowing-discomfort was the lowest without wearing denture and increased along with the palatal bar position placed from anterior to posterior. Cumulated deoxyhemoglobin signals calculated for 10 s post-swallowing event in the left frontopolar prefrontal cortex showed the best correlation with the subjective rating of discomfort in swallowing with dentures. These neurological signatures would be beneficial to detect swallowing discomfort in elderly denture wearers who have difficulty in communicating with dentists.

Bilateral en-masse distalization of maxillary posterior teeth with skeletal anchorage: a case report

PubMed Central

Noorollahian, Saeed; Alavi, Shiva; Shirban, Farinaz

2016-01-01

ABSTRACT Objective: The aim of this study was to introduce a new method for bilateral distal movement of the entire maxillary posterior segment. Case report: A 17-year-old girl with Class I skeletal malocclusion (end-to-end molar relationships, deviated midline and space deficiency for left maxillary canine) was referred for orthodontic treatment. She did not accept maxillary first premolars extraction. A modified Hyrax appliance (Dentaurum Ispringen, Germany) was used for bilateral distalization of maxillary posterior teeth simultaneously. Expansion vector was set anteroposteriorly. Posterior legs of Hyrax were welded to first maxillary molar bands. All posterior teeth on each side consolidated with a segment of 0.017 × 0.025-in stainless steel wire from the buccal side. Anterior legs of Hyrax were bent into eyelet form and attached to the anterior palate with two mini-screws (2 × 10 mm) (Jeil Medical Corporation Seoul, South Korea). Hyrax opening rate was 0.8 mm per month. Lateral cephalometric radiographs were used to evaluate the extent of distal movement. 3.5-mm distalization of posterior maxillary teeth was achieved in five months. Results: A nearly bodily distal movement without anchorage loss was obtained. Conclusion: The mini-screw-supported modified Hyrax appliance was found to be helpful for achieving en-masse distal movement of maxillary posterior teeth. PMID:27409657

Evaluation of unilateral cleft lip and palate using anthropometry measurements post-alveolar bone grafting

NASA Astrophysics Data System (ADS)

Simorangkir, H. J.; Hak, M. S.; Tofani, I.

2017-08-01

Rehabilitation of patients with unilateral cleft lip and palate (UCLP) requires multiple steps and coordination of multidisciplinary sciences to produce optimal results. Alveolar bone-grafting (ABG) is an important procedure in the treatment of such patients because it influences the eruption of teeth and stabilizes the maxilla. To evaluate the effect and suitability of alveolar bone grafting procedure at Cleft Center Harapan Kita Maternal and Child Hospital on nasal deformity from anthropometry with photogrammetry and aesthetic proportional in patients with unilateral cleft lip and palate with UCLP. Patients with UCLP were evaluated post-ABG using anthropometry and photogrammetry to investigate the results anteriorly, laterally, and basally. Anthropometric measurements taken photogrammetrically used 14 points and 11 distance items. Evaluations were made of upper lip length, upper lip projection, and nostril sill elevation for both the cleft and non-cleft sides of patients’ faces. A t-test showed that the values for upper lip length and projection were significantly increased, and a correction test using a Fisher exam gave a value of 1. The ABG treatment protocol for patients with UCLP at the Cleft Lip and Palate Unit at Harapan Kita Maternal and Child Hospital is suitable to be performed; it aesthetically satisfies patients and their families.

Effect of bracket slot and archwire dimensions on anterior tooth movement during space closure in sliding mechanics: a 3-dimensional finite element study.

PubMed

Tominaga, Jun-ya; Ozaki, Hiroya; Chiang, Pao-Chang; Sumi, Mayumi; Tanaka, Motohiro; Koga, Yoshiyuki; Bourauel, Christoph; Yoshida, Noriaki

2014-08-01

It has been found that controlled movement of the anterior teeth can be obtained by attaching a certain length of power arm onto an archwire in sliding mechanics. However, the impact of the archwire/bracket play on anterior tooth movement has not been clarified. The purpose of this study was to compare the effect of the power arm on anterior tooth movements with different dimensions of bracket slots and archwires. A 3-dimensional finite element method was used to simulate en-masse anterior tooth retraction in sliding mechanics. Displacements of the maxillary central incisor and the archwire deformation were calculated when applying retraction forces from different lengths of power arms. When a 0.017 × 0.022-in archwire was engaged into the 0.018-in slot bracket, bodily movement of the incisor was obtained with 9.1-mm length of the power arm. When a 0.022-in slot system was coupled with a 0.019 × 0.025-in archwire, bodily movement was observed with a power arm length of 11.6 mm. Archwire/bracket play has a remarkable impact on anterior tooth movement. An effective torque application to the anterior teeth becomes clinically difficult in sliding mechanics combined with power arms when the archwire/bracket play is large. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

In vitro comparison of implant- versus gingiva-supported removable dentures in anterior and posterior applications.

PubMed

Rosentritt, Martin; Heidtkamp, Felix; Hösl, Helmut; Hahnel, Sebastian; Preis, Verena

2016-03-01

Removable dentures with different denture teeth may provide different performance and resistance in implant and gingival situations, or anterior and posterior applications. Two situations of removable dentures were investigated: gingiva (flexible) and implant (rigid) bearing. For simulating the gingiva/jaw situation, the dentures were supported with flexible lining material. For the implant situation, implants (d = 4.1 mm) were screwed into polymethylenmethacrylate (PMMA) resin. Two commercial (Vita-Physiodens MRP, SR Vivodent/Orthotyp DCL) and two experimental materials (EXP1, EXP2) were investigated in anterior (A) and posterior (P) tooth locations. Chewing simulation was performed, and failures were analyzed (microscopy, SEM). Fracture strength of surviving dentures was determined. Only EXP1 revealed failures during chewing simulation. Failures varied between anterior and posterior locations, and between implant (P:4x; A:7x) or gingiva (P:1x; A:2x) situations. Kaplan-Meier log-rank test revealed significant differences for implant situations (p < 0.002), but not for gingiva bearing (p > 0.093). Fracture testing in the implant situation provided significantly highest values for EXP2 (1476.4 ± 532.2 N) in posterior location, and for DCL (1575.4 ± 264.4 N) and EXP2 (1797.0 ± 604.2 N) in anterior location. For gingival bearing, significantly highest values were found for DCL/P (2148.3 ± 836.3 N), and significantly lowest results for EXP1/A (308.2 ± 115.6 N). For EXP1 + EXP2 + Vita/P and for EXP1/A no significant differences were found between implant- or gingiva-supported situations. Anterior and posterior teeth showed different material-dependent in vitro performance, further influenced by implant/gingiva bearing. While an implant in anterior application increased fracture strength of two materials, it decreased fracture values of 3/4 of the materials in posterior application. Survival of denture teeth may be influenced by material, oral position, and bearing situation.

Multiple extraction patterns in severe discrepancy cases.

PubMed

Anderson, B D

1975-10-01

Thirty-five cases have been collected from colleagues which illustrate that removal of additional maxillary teeth, following first bicuspid extractions, can allow the successful resolution of difficult discrepancy and anchorage cases. Charts 1 and 2 describe the amounts of space that might be expected by removal of additional upper bicuspids, upper first molars, and upper second molars. The findings on upper second molars are admittedly limited. Anchorage values as expressed by an efficiency percentage were approximately what would be expected from a study of anchorage values of the roots of teeth. The removal of upper second bicuspids has a better anchorage efficiency potential than the upper first molar, but this may be overcome somewhat by the greater size of the molar. Clear guidance cannot be given as to which teeth to remove in a specific case, but it is the observation of the author that for cases that are still in full Class II following four bicuspid space closure, upper second bicuspid removal would be more helpful from an anchorage perspective, whereas for cases that are in end-to-end molar relationship or require only a few millimeters to move into Class I, the upper first molar might be the tooth of choice. Also, the supper first molar removal allows for a more "normal" appearing arch assuming normal alignment and size of the upper second and third molars. The comparison with the nonextraction control group showed an enormous difference in the amount of incisor retraction that extractions provide when related to the maxilla. The nonextraction control group, though experiencing dramatic correction of Class II relationships, showed no incisor movement within the maxilla. Some problems which appeared in the sample were described. Removal of upper teeth in addition to the four first bicuspids can be a solution to an occasional anchorage, skeletal, growth or cooperation problem.

Maxillary overdentures supported by anteriorly or posteriorly placed implants opposed by a natural dentition in the mandible: a 1-year prospective case series study.

PubMed

Slot, Wim; Raghoebar, Gerry M; Vissink, Arjan; Meijer, Henny J A

2014-02-01

For maxillary overdenture therapy, treatment guidelines are missing. There is a need for longitudinal studies. The purpose of this 1-year prospective case series study was to assess the treatment outcome of maxillary overdentures supported by six dental implants opposed by natural antagonistic teeth in the mandible. Fifty patients were treated with a maxillary overdenture supported by six dental implants, either placed in the anterior region (n = 25 patients) or in the posterior region (n = 25 patients). Items of evaluation were the following: survival of implants, condition of hard and soft peri-implant tissues, and patients' satisfaction. One-year implant survival rate was 98% in the anterior group and 99.3% in the posterior group. Mean radiographic bone loss in the anterior and posterior groups after 1 year of loading was 0.22 and 0.50 mm, respectively. Mean scores for plaque, calculus, gingiva, bleeding, and pocket probing depth were low, and patients' satisfaction was high, with no differences between the groups. Six dental implants placed in either the anterior region or the posterior region of the edentulous maxilla, connected with a bar, and opposed by antagonistic teeth in the mandible supply a proper base for the support of an overdenture. © 2012 Wiley Periodicals, Inc.

Retrospective Study of Retention of Stainless Steel Crowns and Pre-veneered Crowns on Primary Anterior Teeth.

PubMed

Lopez-Loverich, Angela M; Garcia, Maria Minerva; Donly, Kevin J

2015-01-01

The purpose of this retrospective chart review was to explore the retention of anterior pre-veneered stainless steel crowns (NuSmile) and conventional stainless steel crowns (3M ESPE) placed on primary anterior teeth. Records for children were reviewed over four years using the electronic record system axiUm. Data collected included child's age at time of crown placement, date of placement, tooth number, type of crown, patient behavior, treatment environment, provider type, crown presence, absence, and cementation success or failure at subsequent recall visits. A total of 637 anterior crowns in children treated with either or both crown types met this study's inclusion criteria. Of these crowns, 483 were NuSmile Signature crowns and 154 were stainless steel crowns. There was a nine percent failure rate for the NuSmile Signature crowns and a seven percent failure rate for the stainless steel crowns. There was no statistically significant difference in crown retention rates between the two groups (P<0.05). A full-coverage restoration that can follow the lifespan of the primary anterior dentition in high-risk children is needed. The results from this study indicate good crown retention rates for both crown types with no statistically significant difference between them (P<0.05).

[Therapeutic evaluation of the correction of the severe bi-maxillary protrusion cases by Tweed-Merrifield technique].

PubMed

Huang, J Q; Liu, S Y; Jiang, J H

2016-06-18

To evaluate the influence of Tweed-Merrifield technique in correction of severe bimaxillary protrusion adult patients on the measurement of the dental and skeletal changes after orthodontic treatment by Johnston analysis and the regular cephalomatric analysis. Twelve adolescent patients with severe bimaxillary protrusion were included in this self-control retrospective study. Lateral cephalometric radiographs were taken before and after treatments. All the radiographs were traced and analyzed by the method of Johnston analysis. Other measurements were evaluated using a series of 13 linear and angular measurements including SNA, SNB, ANB, U1-SN, U1-NA, U1/NA, L1-NB, U1/NB, L1/MP, U1-L1, (U1+L1)/2-AB, MP/SN and MP/FH from regular cephalomatric analysis. These measurements were also applied to compare the differences between pre- and post-treatments, which clarify the dental and skeletal changes by Johnston analysis. The effect of orthodontic correction was determined using the non-parameters test. The maxillary moved backforward by 1.3 mm according to the stable skull base, while the mandible moved forward by 2.12 mm. The relative position between the maxillary and mandible (ABCH) changed 3.42 mm. The upper and lower incisors retracted significantly. The upper and lower molars moved slightly forward and the relative positions of upper and lower molars and anterior teeth after treatment were 3.44 mm and 4.23 mm respectively. After treatment, the parameters of ANB, U1-NA, U1/NA, U1-SN, L1-NB, L1/NB and L1-M were reduced by -(1.98±1.55)°(P=0.012), - (5.08±4.6) mm (P=0.002), -(11.79±1.21)°(P=0.004), -(13.55±6.32)°(P=0.047), -(3.17±3.07) mm (P=0.010), -(6.84±2.55)°(P=0.038) and -(4.13±2.24)°(P=0.048) on average, whose changes had the statistically significant effects. Tweed-Merrifield technique (directional force technique) can stabilize anchorage molar, retract anterior teeth and significantly improve the hard and soft tissue profile for patients with bimaxillary protrusion, and make a good vertical control which means this technique is applicable to the patients who need strong anchorage. Even for the severe bimaxillary protrusion adult patients, the Tweed-Merrifield technique can control the anchoragewell and make the profiles improved greatly.

Characteristics of dental pulp in human upper first premolar teeth based on immunohistochemical and morphometric examinations.

PubMed

Tomaszewska, Joanna Maria; Miskowiak, Bogdan; Matthews-Brzozowska, Teresa; Wierzbicki, Piotr

2013-01-01

Teeth extracted for orthodontic reasons are commonly considered as healthy. Therefore, it is possible to examine structure of the dental pulp can be fully recognized and how it is affected by malocclusion. The aim of the study was to evaluate by immunohistochemistry (IHC) and morphometry dental pulp in human upper first premolar teeth extracted for orthodontic reasons. The material comprised 36 teeth of 20 patients in the age range 16-26 years. By the use of IHC markers the presence of immunocompetent cells (CD20, CD45RO, and CD68), blood vessels (CD31) and nerves (PGP9.5) were examined in the pulp. Inflammatory infiltrates and tissue atrophy were observed in 24 and 10 teeth, respectively. Strong positive correlation between the width of the odontoblastic layer, the number of rows of odontoblast nuclei and the increase of MVA (microvessel area) in the pulp of atrophic teeth was found. The cellular infiltrations found in H&E-stained sections were identified by IHC as memory T cells (CD45RO+) and B lymphocytes (CD20+) with macrophages (CD68+) present at the periphery. The CD20 antigen was intensively expressed in 13 teeth, CD45RO in 33 teeth, and CD68 in 20 teeth. Thus, despite the lack of any clinical signs of pulp disease many teeth extracted for orthodontic reasons show focal pulp inflammation and atrophy which probably results from the malocclusion stress accompanying teeth crowding.

Selection and constraint underlie irreversibility of tooth loss in cypriniform fishes

PubMed Central

Aigler, Sharon R.; Jandzik, David; Hatta, Kohei; Uesugi, Kentaro; Stock, David W.

2014-01-01

The apparent irreversibility of the loss of complex traits in evolution (Dollo’s Law) has been explained either by constraints on generating the lost traits or the complexity of selection required for their return. Distinguishing between these explanations is challenging, however, and little is known about the specific nature of potential constraints. We investigated the mechanisms underlying the irreversibility of trait loss using reduction of dentition in cypriniform fishes, a lineage that includes the zebrafish (Danio rerio) as a model. Teeth were lost from the mouth and upper pharynx in this group at least 50 million y ago and retained only in the lower pharynx. We identified regional loss of expression of the Ectodysplasin (Eda) signaling ligand as a likely cause of dentition reduction. In addition, we found that overexpression of this gene in the zebrafish is sufficient to restore teeth to the upper pharynx but not to the mouth. Because both regions are competent to respond to Eda signaling with transcriptional output, the likely constraint on the reappearance of oral teeth is the alteration of multiple genetic pathways required for tooth development. The upper pharyngeal teeth are fully formed, but do not exhibit the ancestral relationship to other pharyngeal structures, suggesting that they would not be favored by selection. Our results illustrate an underlying commonality between constraint and selection as explanations for the irreversibility of trait loss; multiple genetic changes would be required to restore teeth themselves to the oral region and optimally functioning ones to the upper pharynx. PMID:24821783

In vitro assessment of retention and resistance failure loads of two preparation designs for maxillary anterior teeth.

PubMed

Bintivanou, Aimilia; Pissiotis, Argirios; Michalakis, Konstantinos

2017-04-01

Parallel labiolingual walls and the preservation of the cingulum in anterior tooth preparations have been advocated. However, their contribution to retention and resistance form has not been evaluated. The purpose of this in vitro study was to evaluate the retention and resistance failure loads of 2 preparation designs for maxillary anterior teeth. Forty metal restorations were fabricated and paired with 40 cobalt-chromium prepared tooth analogs. Twenty of the specimens had parallel buccolingual walls at the cervical part (group PBLW; the control group), whereas the remaining 20 had converging buccolingual walls (group CBLW; the experimental group). The restorations were cemented to the tooth analogs with a resin-modified glass ionomer luting agent. Ten specimens from each group were subjected to tensile loading with a universal testing machine; the rest were subjected to compression loading until failure. Descriptive statistics and the independent t test (α=.05) were used to determine the effect of failure loads in the tested groups. The independent t test revealed statistically significant differences between the tested groups in tensile loading (P<.001) and in compressive loading (P<.001). The PBLW group presented a higher tensile failure load than the CBLW. On the contrary, the PBLW group presented a smaller compression failure load than the CBLW. Parallelism of the buccolingual axial walls in anterior maxillary teeth increased the retention form but decreased the resistance form. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

3D enamel thickness in Neandertal and modern human permanent canines.

PubMed

Buti, Laura; Le Cabec, Adeline; Panetta, Daniele; Tripodi, Maria; Salvadori, Piero A; Hublin, Jean-Jacques; Feeney, Robin N M; Benazzi, Stefano

2017-12-01

Enamel thickness figures prominently in studies of human evolution, particularly for taxonomy, phylogeny, and paleodietary reconstruction. Attention has focused on molar teeth, through the use of advanced imaging technologies and novel protocols. Despite the important results achieved thus far, further work is needed to investigate all tooth classes. We apply a recent approach developed for anterior teeth to investigate the 3D enamel thickness of Neandertal and modern human (MH) canines. In terms of crown size, the values obtained for both upper and lower unworn/slightly worn canines are significantly greater in Neandertals than in Upper Paleolithic and recent MH. The 3D relative enamel thickness (RET) is significantly lower in Neandertals than in MH. Moreover, differences in 3D RET values between the two groups appear to decrease in worn canines beginning from wear stage 3, suggesting that both the pattern and the stage of wear may have important effects on the 3D RET value. Nevertheless, the 3D average enamel thickness (AET) does not differ between the two groups. In both groups, 3D AET and 3D RET indices are greater in upper canines than in lower canines, and overall the enamel is thicker on the occlusal half of the labial aspect of the crown, particularly in MH. By contrast, the few early modern humans investigated show the highest volumes of enamel while for all other components of 3D enamel, thickness this group holds an intermediate position between Neandertals and recent MH. Overall, our study supports the general findings that Neandertals have relatively thinner enamel than MH (as also observed in molars), indicating that unworn/slightly worn canines can be successfully used to discriminate between the two groups. Further studies, however, are needed to understand whether these differences are functionally related or are the result of pleiotropic or genetic drift effects. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Variations in tooth size and arch dimensions in Malay schoolchildren.

PubMed

Hussein, Khalid W; Rajion, Zainul A; Hassan, Rozita; Noor, Siti Noor Fazliah Mohd

2009-11-01

To compare the mesio-distal tooth sizes and dental arch dimensions in Malay boys and girls with Class I, Class II and Class III malocclusions. The dental casts of 150 subjects (78 boys, 72 girls), between 12 and 16 years of age, with Class I, Class II and Class III malocclusions were used. Each group consisted of 50 subjects. An electronic digital caliper was used to measure the mesio-distal tooth sizes of the upper and lower permanent teeth (first molar to first molar), the intercanine and intermolar widths. The arch lengths and arch perimeters were measured with AutoCAD software (Autodesk Inc., San Rafael, CA, U.S.A.). The mesio-distal dimensions of the upper lateral incisors and canines in the Class I malocclusion group were significantly smaller than the corresponding teeth in the Class III and Class II groups, respectively. The lower canines and first molars were significantly smaller in the Class I group than the corresponding teeth in the Class II group. The lower intercanine width was significantly smaller in the Class II group as compared with the Class I group, and the upper intermolar width was significantly larger in Class III group as compared with the Class II group. There were no significant differences in the arch perimeters or arch lengths. The boys had significantly wider teeth than the girls, except for the left lower second premolar. The boys also had larger upper and lower intermolar widths and lower intercanine width than the girls. Small, but statistically significant, differences in tooth sizes are not necessarily accompanied by significant arch width, arch length or arch perimeter differences. Generally, boys have wider teeth, larger lower intercanine width and upper and lower intermolar widths than girls.

Palatal Injection for the Removal of Maxillary Teeth: Current Practice Among Oral and Maxillofacial Surgeons.

PubMed

Badenoch-Jones, Emma K; David, Michael; Lincoln, Trent

2017-07-01

Conventional teaching regarding palatal injection for the removal of maxillary teeth dictates the administration of buccal and palatal injections. Recently, some investigators have questioned the necessity of the palatal injection, suggesting that contemporary local anesthetics might diffuse sufficiently across the buccopalatal cortical bone distance. It has been suggested that because the buccopalatal cortical bone distance increases anteriorly to posteriorly in the maxilla, the success of maxillary extractions with buccal injection only might be related to the anteroposterior position of the tooth. Evidence from clinical trials has only recently become available. Since 2006, 15 clinical trials that examined outcomes of maxillary tooth extractions performed with buccal injection of local anesthetic only have been published. However, there are limited data available on the clinical practice of surgeons. An online survey was sent to 276 full members of the Canadian Association of Oral and Maxillofacial Surgeons. Respondents were asked about their use of palatal injection for the removal of maxillary teeth under local anesthesia, including how often they administer a palatal injection for maxillary extractions in each region of the maxilla. Ninety-two responses were received (33%). Most practitioners deliver a palatal injection for every maxillary tooth extraction under local anesthesia. However, there is a substantial number who do not always administer a palatal injection (ie, they give it "most of the time," "occasionally," or "never"). This number decreased in a linear fashion anteriorly to posteriorly in the maxilla (incisors, 17 of 89; canines, 16 of 88; premolars, 13 of 88; first and second molars, 10 of 89; third molars, 10 of 88). Some surgeons who do not always administer a palatal injection for extraction of maxillary teeth under local anesthesia. The number is larger for anterior compared with posterior teeth. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Prevalence of vertical root fracture as the reason for tooth extraction in dental clinics.

PubMed

Yoshino, Koichi; Ito, Koji; Kuroda, Masahiko; Sugihara, Naoki

2015-07-01

The aim of this study was to investigate the prevalence, by gender, of vertical root fracture (VRF) as the main reason for the extraction of permanent teeth in dental clinics in Tokyo. Participating dentists were requested to provide information about extractions of permanent teeth they had performed from 1 January 2013 to 30 June 2013. The main reasons for extraction were categorized as follows: VRF, caries (horizontal root fracture included), periodontal disease and others. At a total of 24 clinics, 736 teeth were extracted from 626 patients during the 6-month period. A total of 233 teeth were extracted by VRF (31.7%), and 93.6% of these were endodontically treated teeth. Among non-vital extracted teeth, 82.1% (179/218) had cast posts or screw posts. The percentage of extraction due to VRF was 29.4% in males and 34.7% in females. In females, the percentage of extractions due to VRF (34.7%) was higher than for periodontal disease (28.1%). In males, the percentage of extractions due to VRF increased with age (p < 0.05). The tooth types with the highest percentage of extractions due to VRF were the upper canine (46.7%), lower second premolar (48.0%) and lower first molar (50.0%) in males and the upper first premolar (43.3%), upper second premolar (44.4%), lower second premolar (53.8%) and lower first molar (54.5%) in females. These results indicate that we need to pay more attention to maintaining vital teeth while being aware of the particular tooth types in which VRF most frequently occurs.

Correction of anterior crossbite using modified transparent aligners: An esthetic approach

PubMed Central

Abraham, K. Korath; James, Arun Roy; Thenumkal, Elza; Emmatty, Tharian

2016-01-01

Anterior crossbite results from the abnormal axial inclination of one or more anterior teeth. It is a major esthetic and functional anomaly which has to be corrected in the primary and early mixed dentition period to allow the normal development of maxilla and mandible as well as the occlusion. Several treatment options are available to correct the problem. A unique appliance, “modified transparent tray aligners” was used to correct the anterior crossbite in an 8-year-old child. The clinical presentation, fabrication of the appliance, and the outcome are discussed. PMID:27630508

Revision of the genus Verilus (Perciformes: Acropomatidae) with a description of a new species.

PubMed

Yamanoue, Y

2016-11-01

The acropomatid genus Verilus is redescribed as a senior synonym of Apogonops and Neoscombrops with description of a new species and a taxonomic revision of the five species that were formerly classified in these genera. This genus is characterized by the following combination of characters: a canine tooth (rarely two) near symphysis of premaxilla of upper jaw but lacking a row of conical teeth on anterior part of outer premaxillary margin; a canine tooth (rarely two) near symphysis of dentary with only villiform or a row of conical teeth posteriorly; three anal-fin spines; 10 dorsal-fin spines; pelvic-fin spine smooth; luminous organ absent. This genus comprises six species: Verilus sordidus (type species, western Atlantic Ocean); Verilus anomalus (off southern and eastern coast of Australia); Verilus atlanticus (western Atlantic Ocean); Verilus cynodon (south-western Indian Ocean); Verilus pacificus (north-western and central Pacific Ocean); Verilus starnesi sp. nov. (Coral Sea off Chesterfield Islands, New Caledonia). These species are distinguishable from one another by dentition on the lower jaw, numbers of pectoral-fin rays, gill rakers and lateral-line scales, features of the proximal-middle radial of the first anal-fin pterygiophore, presence or absence of basioccipital fossa and body depth. © 2016 The Fisheries Society of the British Isles.

A new marine reptile from the Triassic of China, with a highly specialized feeding adaptation.

PubMed

Cheng, Long; Chen, Xiao-Hong; Shang, Qing-Hua; Wu, Xiao-Chun

2014-03-01

The Luoping fauna (Anisian, Middle Triassic) is probably the oldest of Triassic faunas in Guizhou-Yunnan area, China. The reptilian assemblage is comprised of ichthyosaurs, a number of sauropterygians (pachypleurosaur-like forms), saurosphargids, protorosaurs, and archosauriforms. Here, we report on a peculiar reptile, newly found in this fauna. Its dentition is fence or comb-like and bears more than 175 pleurodont teeth in each ramus of the upper and lower jaws, tooth crown is needle-like distally and blade-shaped proximally; its rostrum strongly bends downward and the anterior end of its mandible expands both dorsally and ventrally to form a shovel-headed structure; and its ungual phalanges are hoof-shaped. The specializations of the jaws and dentition indicate that the reptile may have been adapted to a way of bottom-filter feeding in water. It is obvious that such delicate teeth are not strong enough to catch prey, but were probably used as a barrier to filter microorganisms or benthic invertebrates such as sea worms. These were collected by the specialized jaws, which may have functioned as a shovel or pushdozer (the mandible) and a grasper or scratcher (the rostrum). Our preliminary analysis suggests that the new reptile might be more closely related to the Sauropterygia than to other marine reptiles.

A new marine reptile from the Triassic of China, with a highly specialized feeding adaptation

NASA Astrophysics Data System (ADS)

Cheng, Long; Chen, Xiao-Hong; Shang, Qing-Hua; Wu, Xiao-Chun

2014-03-01

The Luoping fauna (Anisian, Middle Triassic) is probably the oldest of Triassic faunas in Guizhou-Yunnan area, China. The reptilian assemblage is comprised of ichthyosaurs, a number of sauropterygians (pachypleurosaur-like forms), saurosphargids, protorosaurs, and archosauriforms. Here, we report on a peculiar reptile, newly found in this fauna. Its dentition is fence or comb-like and bears more than 175 pleurodont teeth in each ramus of the upper and lower jaws, tooth crown is needle-like distally and blade-shaped proximally; its rostrum strongly bends downward and the anterior end of its mandible expands both dorsally and ventrally to form a shovel-headed structure; and its ungual phalanges are hoof-shaped. The specializations of the jaws and dentition indicate that the reptile may have been adapted to a way of bottom-filter feeding in water. It is obvious that such delicate teeth are not strong enough to catch prey, but were probably used as a barrier to filter microorganisms or benthic invertebrates such as sea worms. These were collected by the specialized jaws, which may have functioned as a shovel or pushdozer (the mandible) and a grasper or scratcher (the rostrum). Our preliminary analysis suggests that the new reptile might be more closely related to the Sauropterygia than to other marine reptiles.

Quantification of facial and smile esthetics.

PubMed

Koidou, Vasiliki P; Chatzopoulos, Georgios S; Rosenstiel, Stephen F

2018-02-01

Whether deviations in alignment discrepancy, width-to-length ratio, application of the golden proportion, or number of teeth revealed in smile affect attractiveness is yet unknown. The purpose of this analytical study was to quantify dental and facial esthetics to determine whether individuals identified as having superior smiles display differences in alignment discrepancies (angulation between interpupillary and commissure line); width-to-length ratios of maxillary anterior teeth; application of the golden proportion (approximately 1.618:1); and number of teeth revealed in an animated smile when compared with an average population. An Internet search for "best smile" and "celebrity" identified 108 celebrities. Photographs showing smiles within 10 degrees of a frontal view were collected, while photographs of dental students were used for the control group. Alignment discrepancies, widths and lengths of the anterior teeth, and number of teeth revealed in an animated smile were measured with photo-editing software, and ratios were calculated. The groups were compared with repeated-measures ANOVA, the Mann-Whitney U test, and the Wilcoxon signed-rank test (α=.05). Usable photographs were obtained for 90 celebrities (58 women, 32 men) and compared with photographs of 97 dental students (54 women, 43 men). Statistically significant differences were found for alignment discrepancies (celebrities 0.97, students 1.25, P=.034) and for the number of teeth displayed (P=.049); 22.2% of the celebrities revealed 12 teeth, versus 6.2% of the students. In both groups, significant differences from the golden ratio (1.618:1) for the width of the central incisor/lateral incisor right and left and for the width of the lateral incisor/canine right and left were observed through 95% confidence intervals. Sex and left-right were nonsignificant factors. Celebrities identified as having a best smile had smaller mean alignment discrepancies and revealed a greater number of teeth in an animated smile than dental students. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Treatment planning: implant-supported partial overdentures.

PubMed

Chee, Winston W L

2005-04-01

When multiple anterior teeth are missing, many options of replacement are available. Traditionally, the choice was between a fixed or removable prostheses. Today, with the predictability of dental implants, the options of tooth replacement range from removable partial dentures to implant-supported fixed prostheses. The choice of which restoration that will best provide occlusion and esthetics depends on multiple factors including the number and location of missing teeth, the residual ridge form in relation to the replacement teeth, the relationship of the maxillary and mandibular anterior teeth, the condition of teeth adjacent to the edentulous span, the amount of bone available for implant placement, the patients "smile line" and display of teeth, lip support, and financial constraints. When there is minimal loss of the ridge contour, restorations that emerge from the ridge are the most functional and esthetic restorations, adhesive-type fixed partial dentures, conventional fixed partial dentures, and implant-supported restorations can be indicated with the choice of restoration dependent on a risk benefit and cost benefit analysis. When there is a loss of ridge contour due to residual ridge resorption or trauma, the decision becomes more complex as not only does the tooth structure need to be replaced, the ridge form also has to be replaced. (Figures 1 and 2). This can be assessed clinically as illustrated by Figures 1 and 2 where a dis crepancy in arch form and ridge form in relation to the adjacent teeth and/or opposing arch can be observed. Other considerations are lip support and display of the teeth when smiling. This article presents a case and rationale for implant-supported par tial overdentures. Many authors have written on the merits of com plete overdentures. The complete overdenture has proven to be an improvement over conventional complete prostheses with respect to chewing efficiency, patient comfort and satisfaction. In partial edentulism, the implant-supported overdenture has several advantages, some in common with a removable partial denture.

Enamel hypoplasia in the middle pleistocene hominids from Atapuerca (Spain).

PubMed

Bermúdez de Castro, J M; Pérez, P J

1995-03-01

The prevalence and chronology of enamel hypoplasias were studied in a hominid dental sample from the Sima de los Huesos (SH) Middle Pleistocene site at the Sierra de Atapuerca (Burgos, northern Spain). A total of 89 permanent maxillary teeth, 143 permanent mandibular teeth, and one deciduous lower canine, belonging to a minimum of 29 individuals, were examined. Excluding the antimeres (16 maxillary and 37 mandibular cases) from the sample, the prevalence of hypoplasias in the permanent dentition is 12.8% (23/179), whereas the deciduous tooth also showed an enamel defect. No statistically significant differences were found between both arcades and between the anterior and postcanine teeth for the prevalence of hypoplasias. In both the maxilla and the mandible the highest frequency of enamel hypoplasias was recorded in the canines. Only one tooth (a permanent upper canine) showed two different enamel defects, and most of the hypoplasias were expressed as faint linear horizontal defects. Taking into account the limitations that the incompleteness of virtually all permanent dentitions imposes, we have estimated that the frequency by individual in the SH hominid sample was not greater than 40%. Most of the hypoplasias occurred between birth and 7 years (N = 18, X = 3.5, SD = 1.3). Both the prevalence and severity of the hypoplasias of the SH hominid sample are significantly less than those of a large Neandertal sample. Furthermore, prehistoric hunter-gatherers and historic agricultural and industrial populations exhibit a prevalence of hypoplasias generally higher than that of the SH hominids. Implications for the survival strategies and life quality of the SH hominids are also discussed.

Rehabilitation of molar-incisor hypomineralization (MIH) complicated with localized tooth surface loss: a case report.

PubMed

Lam, Walter Y H; Ho, Edward H T; Pow, Edmond H N

2014-05-01

Molar-incisor hypomineralization (MIH) is a developmental enamel hypomineralized condition characteristically involving the first permanent molars and sometimes also the incisors. The affected teeth are predisposed to tooth surface loss (TSL) which may not only compromise the esthetics and function but also endanger the pulp and longevity of the teeth. This report describes the management of a patient with MIH complicated with localized TSL and lack of occlusal clearance due to dentoalveolar compensation. The atypical TSL pattern involved all anterior teeth and required the placement of Dahl appliances on both arches.

Sliding mechanics with microscrew implant anchorage.

PubMed

Park, Hyo-Sang; Kwon, Tae-Geon

2004-10-01

Three cases are illustrated. One was treated with maxillary microscrew implants, another with mandibular microscrew implants, and the third with both maxillary and mandibular microscrew implants. With the maxillary microscrew implants, the maxillary anterior teeth were retracted bodily with a slight intrusion and all the premolar extraction space was closed without loss of anchorage. Furthermore, the maxillary posterior teeth showed distal movement. The mandibular microscrew implants controlled the vertical position of the mandibular posterior teeth and played an important role in improving the facial profile. The efficacy of sliding mechanics with microscrew implant anchorage on the treatment of skeletal Class II malocclusion is also discussed.

Clinical examination of leucite-reinforced glass-ceramic crowns (Empress) in general practice: a retrospective study.

PubMed

Sjögren, G; Lantto, R; Granberg, A; Sundström, B O; Tillberg, A

1999-01-01

The purpose of this study was to retrospectively evaluate leucite reinforced-glass ceramic crowns (Empress) placed in patients who regularly visit general practices. One hundred ten Empress crowns, placed in 29 patients who visited a general practice on a regular basis, were evaluated according to the California Dental Association's (CDA) quality evaluation system. In addition, the occurrence of plaque and certain gingival conditions was evaluated. All crowns were luted with resin composite cement. The mean and median years in function for the crowns were 3.6 and 3.9 years, respectively. Based on the CDA criteria, 92% of the 110 crowns were rated "satisfactory." Eighty-six percent were given the CDA rating "excellent" for margin integrity. Fracture was registered in 6% of the 110 crowns. Of the remaining 103 crowns, the CDA rating excellent was given to 74% for anatomic form, 86% for color, and 90% for surface. No significant differences (P > 0.05) were observed regarding fracture rates between anterior and posterior crowns. With regard to the occurrence of plaque and bleeding on probing, no significant differences (P > 0.05) were observed between the Empress crowns and the controls. Most of the fractured crowns had been placed on molars or premolars. Although the difference between anterior and posterior teeth was not statistically significant with respect to the fracture rates obtained, the number of fractured crowns placed on posterior teeth exceeded that of those placed on anterior teeth. The difference between the fracture rates may have clinical significance, and the risk of fracture has to be taken into consideration when placing crowns on teeth that are likely to be subjected to high stress levels.

CAD/CAM techniques help in the rebuilding of ideal marginal gingiva contours of anterior maxillary teeth: A case report.

PubMed

Yin, Jiayue; Liu, Dan; Huang, Yuehua; Wu, Lin; Tang, Xiaolin

2017-11-01

"Pink esthetics," which are considered to be as important as "white esthetics," have attracted increasing attention. To date, clinicians rarely have applied computer-aided design and computer-aided manufacturing (CAD/CAM) techniques in the rebuilding of the contour of the marginal gingiva in the esthetic zone. In this case report, the authors describe a female patient who had gingival inflammation and an asymmetrical contour of the marginal gingiva of the anterior maxillary teeth because previously placed ceramic crowns violated the biological width. The authors used a 3-dimensional-printing surgery template to guide precise crown-lengthening surgery to expose subgingival shoulders and to obtain an ideal marginal gingival contour. Then the authors used interim CAD/CAM crowns to induce the growth of the interdental papilla by 0.5 to 1.5 millimeters. Finally, the patient had a symmetrical and well-balanced contour of the marginal gingiva. In addition, the authors reduced the patient's "black triangle" areas to the greatest possible extent. This case report illustrates that CAD/CAM products, including 3-dimensional-printing surgery templates and CAD/CAM interim crowns, are helpful in shaping and rebuilding the ideal contour of the marginal gingiva in the esthetic zone, such as the anterior maxillary teeth. Copyright © 2017 American Dental Association. Published by Elsevier Inc. All rights reserved.

Correlation of gingival thickness with gingival width, probing depth, and papillary fill in maxillary anterior teeth in students of a dental college in Navi Mumbai

PubMed Central

Singh, Jyotsna; Rathod, Varsha J.; Rao, Prajakta R.; Patil, Aardra A.; Langade, Deepak G.; Singh, Roshan K.

2016-01-01

Context: The gingival biotype is of utmost importance for esthetics and biologic function. Anatomical characteristic of periodontium such as gingival thickness (GT), width of keratinized gingiva, and alveolar bone morphology will determine the behavior of periodontium when subjected to physical, chemical, or bacterial insult or during therapeutic procedure. Aims: The aim of this study was to correlate the GT with gingival width (GW), probing depth (PD), and papillary fill (PF) in relation to maxillary anterior region. Settings and Design: Undergraduate dental students and interns from a dental college in Navi Mumbai were enrolled in the study according to the inclusion criteria. Six teeth per subject were assessed; a total of 2178 maxillary anterior teeth were examined. Subjects and Methods: Subjects were examined clinically for GT, width of keratinized gingiva, pocket depth, and interdental PF. The data obtained was tabulated and subjected to statistical analysis. Statistical Analysis Used: Spearman's correlation analysis test was performed to find the correlation of GT with GW, PD, and PF. Results: Positive correlation was found between GT and GW (r = 0.241). No significant correlation could be found between GT and PD; and between GT and PF. Conclusions: The present study confirmed a positive correlation between GT and GW. A weak negative correlation was found between GT and PD. PMID:27994424

The Effect of Teeth Clenching on Dynamic Balance at Jump-Landing: A Pilot Study.

PubMed

Nakamura, Tomomasa; Yoshida, Yuriko; Churei, Hiroshi; Aizawa, Junya; Hirohata, Kenji; Ohmi, Takehiro; Ohji, Shunsuke; Takahashi, Toshiyuki; Enomoto, Mitsuhiro; Ueno, Toshiaki; Yagishita, Kazuyoshi

2017-07-01

The aim of this study was to analyze the effect of teeth clenching on dynamic balance at jump landing. Twenty-five healthy subjects performed jump-landing tasks with or without teeth clenching. The first 3 trials were performed with no instruction; subsequently, subjects were ordered to clench at the time of landing in the following 3 trials. We collected the data of masseter muscle activity by electromyogram, the maximum vertical ground reaction force (vGRFmax) and center of pressure (CoP) parameters by force plate during jump-landing. According to the clenching status of control jump-landing, all participants were categorized into a spontaneous clenching group and no clenching group, and the CoP data were compared. The masseter muscle activity was correlated with vGRFmax during anterior jump-landing, while it was not correlated with CoP. In comparisons between the spontaneous clenching and the no clenching group during anterior jump-landing, the spontaneous clenching group showed harder landing and the CoP area became larger than the no clenching group. There were no significant differences between pre- and postintervention in both spontaneous clenching and no clenching groups. The effect of teeth clenching on dynamic balance during jump-landing was limited.

Interdisciplinary treatment of a patient with multiple missing teeth and periodontitis.

PubMed

Ahn, Jae-Chan; Lee, Jae-Hong; Yoon, Joon-Ho; Lee, Ji-Yeon; Kim, Jung-Hoon

2018-02-01

A 49-year-old woman with several missing and periodontically compromised teeth was referred to the orthodontic department of National Health Insurance Service Ilsan Hospital by the periodontic department for interdisciplinary treatment. Multiple posterior teeth had been extracted 10 days earlier. Her chief complaint was crowding of the anterior teeth, and she wanted to improve both esthetics and function. Orthodontic, periodontic, and prosthodontic treatments were undertaken in the proper timing and sequence with an interdisciplinary approach. As a result, improved periodontal health and a stable occlusion and vertical dimension were achieved. Although there were limited teeth and alveolar bone for anchorage, good esthetic and functional treatment results were obtained through the application of temporary anchorage devices and proper biomechanics. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Esthetic enhancement of a traumatized anterior tooth with a combination of forced eruption and tooth alignment: a case report

PubMed Central

Kang, So-Hee; Jin, Myoung-Uk; Kim, Sung-Kyo

2016-01-01

Exposing sound structure of a subgingivally fractured tooth using orthodontic extrusion is considered to be a conservative way to re-establish biologic width without sacrificing esthetics or jeopardizing periodontal support of neighboring teeth. When a misaligned tooth is traumatically involved, a more comprehensive approach combining tooth extrusion and re-alignment may be necessary for a successful restorative outcome. This case report describes a successful esthetic management of a patient with complicated crown-root fracture on the maxillary right central incisor and pre-existing malocclusion in the maxillary anterior region. Forced eruption along with re-alignment of teeth by orthodontic movement seems to allow re-positioning of the fracture line to a favorable position and correction of crowding, providing a better esthetic result. PMID:27508163

A multidisciplinary approach in the treatment of tempromandibular joint pain associated with qat chewing.

PubMed

Shariff, Mansoor; Al-Moaleem, Mohammed M; Al-Ahmari, Nasser M

2013-01-01

Pain of the tempro-mandibular joint (TMJ) has a direct bearing to missing teeth and excessive physical activity. Consumption of qat requires chewing on the leaves to extract their juice for long hours. A 65-year-old male Yemeni patient, a Qat chewer, reported to the university dental hospital at King Khalid University complaining of pain in left temporomandibular joint with missing mandibular anterior teeth. A multidisciplinary approach for the overall treatment of the patient was decided. Initial treatment was the relief of patient's pain with the help of a night guard. This was followed by a fabrication of anterior FPD. The case was under maintenance and follow-up protocol for a period of 8 months with no complaint of pain discomfort.

A Multidisciplinary Approach in the Treatment of Tempromandibular Joint Pain Associated with Qat Chewing

PubMed Central

Shariff, Mansoor; Al-Moaleem, Mohammed M.; Al-Ahmari, Nasser M.

2013-01-01

Pain of the tempro-mandibular joint (TMJ) has a direct bearing to missing teeth and excessive physical activity. Consumption of qat requires chewing on the leaves to extract their juice for long hours. A 65-year-old male Yemeni patient, a Qat chewer, reported to the university dental hospital at King Khalid University complaining of pain in left temporomandibular joint with missing mandibular anterior teeth. A multidisciplinary approach for the overall treatment of the patient was decided. Initial treatment was the relief of patient's pain with the help of a night guard. This was followed by a fabrication of anterior FPD. The case was under maintenance and follow-up protocol for a period of 8 months with no complaint of pain discomfort. PMID:23573427

[The "window" surgical exposure strategy of the upper anterior cervical retropharyngeal approach for anterior decompression at upper cervical spine].

PubMed

Wu, Xiang-Yang; Zhang, Zhe; Wu, Jian; Lü, Jun; Gu, Xiao-Hui

2009-11-01

To investigate the "window" surgical exposure strategy of the upper anterior cervical retropharyngeal approach for the exposure and decompression and instrumentation of the upper cervical spine. From Jan. 2000 to July 2008, 5 patients with upper cervical spinal injuries were treated by surgical operation included 4 males and 1 female with and average age of 35 years old ranging from 16 to 68 years. There were 2 cases of Hangman's fractures (type II ), 2 of C2.3 intervertebral disc displacement and 1 of C2 vertebral body tuberculosis. All patients underwent the upper cervical anterior retropharyngeal approach through the "window" between the hypoglossal nerve and the superior laryngeal nerve and pharynx and carotid artery. Two patients of Hangman's fractures underwent the C2,3 intervertebral disc discectomy, bone graft fusion and internal fixation. Two patients of C2,3 intervertebral disc displacement underwent the C2,3 intervertebral disc discectomy, decompression bone graft fusion and internal fixation. One patient of C2 vertebral body tuberculosis was dissected and resected and the focus and the cavity was filled by bone autografting. C1 anterior arch to C3 anterior vertebral body were successful exposed. Lesion resection or decompression and fusion were successful in all patients. All patients were followed-up for from 5 to 26 months (means 13.5 months). There was no important vascular and nerve injury and no wound infection. Neutral symptoms was improved and all patient got successful fusion. The "window" surgical exposure surgical technique of the upper cervical anterior retropharyngeal approach is a favorable strategy. This approach strategy can be performed with full exposure for C1-C3 anterior anatomical structure, and can get minimally invasive surgery results and few and far between wound complication, that is safe if corresponding experience is achieved.

Interspecies difference in placement of developing teeth and its relationship with cross-sectional geometry of the mandibular symphysis in four primate species including modern humans.

PubMed

Fukase, Hitoshi

2012-02-01

The form of the anthropoid mandibular symphysis has recently been addressed in association with spatial requirements for the forming anterior teeth. To evaluate potential relationships between the symphyseal shape and teeth further, the growth patterns of the symphyseal region and the positioning of the tooth crypts were examined using CT data, comparing four primate species (modern humans, chimpanzees, Japanese monkeys, and hamadryas baboons) with varied symphyseal curvature and tooth size. First, results showed that interspecies differences in overall mandibular shape including symphyseal inclination and bicanine width are consistently expressed throughout postnatal ontogeny, although local symphyseal configurations related to the superior transverse torus (STT) tended to change considerably during growth in chimpanzees. Second, the four species were found to exhibit differentiated formation positions of the incisor and canine crypts. In particular, I2 developed between I1 and C in humans with a broad bicanine space and small teeth, whereas it was positioned posterior to I1 and above C in the cercopithecines with an extremely narrow bicanine space. In chimpanzees, despite the large bicanine width, I1 and I2 grew with a large antero-posterior overlap owing to their large size. These results indicate that the dental positioning is determined in concert with the size balance of the available mandibular space and forming teeth. Finally, the positions/contours of I2 crypt were shown to correspond strongly with the STT across the taxa. This suggests that interspecies differences in symphyseal shape should be interpreted partially by the species-specific positional relationships of the developing anterior teeth. Copyright © 2011 Wiley Periodicals, Inc.

Management of a child with severe hypodontia in the mixed dentition stage of development.

PubMed

Tong, H J; Tahmassebi, J F

2014-12-01

Severe hypodontia is a condition characterized by developmental absence of six or more teeth and affects 0.14-0.3% of the overall population. Hypodontia can have a marked psychosocial effect and functional implications for a growing child. A 10-year-old girl with a medical history of hypothyroidism and repaired spinal bifida was referred to the Leeds Dental Institute as she was becoming increasingly concerned about her appearance. On clinical examination, the patient had severe wear of her over-retained maxillary primary central incisors, microdontia of mandibular anterior teeth (32, 34, 41, 42, 43), and loss of anterior vertical dimension. Radiographic examination revealed that the patient had 11 missing permanent teeth (14, 13, 12, 11, 21, 22, 23, 24, 31, 35, 44), an ectopic mandibular left canine and taurodontism of the permanent molars. Management of the patient included an intensive preventive programme with placement of fissure sealants; scaling of calculus deposition on microdont teeth; composite resin reconstruction of microdont teeth; fabrication of removable partial overdentures tailored aesthetically to match the patient's age; orthodontic consultation and monitoring for the eruption of ectopic canine and permanent dentition. The patient and her parents reported marked improvement in self-esteem following dental treatment. After 2 years of follow-up, a new pair of dentures were made and designed to allow ease of eruption of the existing permanent dentition. All permanent teeth have erupted. The patient is ready for further assessment and planning for future orthodontic and restorative/implant treatment. This case illustrates the essential role of the paediatric dentist in the management of hypodontia in the mixed dentition stage.

A research on epidemiology of multiple anterior malocclusions of children.

PubMed

Li, S Y

1991-01-01

So far there are few report of large sample on epidemiology of children's multiple-anterior cross-bite malocclusions (MACBM) in China. We investigated the epidemiology of MACBM in 10075 3-11 years old children in Beijing Western District by random sampling. MACBM was confined to cross-bite malocclusions of (not including cross-bite on one side or on one individual tooth). The procedure of sampling was general survey in kindergarten and primary school, then the meeting of parents of suffering children, followed by checking their name, sex, age, cause, feed, bad habit and history of family in each teeth-age group (baby teeth group, the first stage group and later stage group of substituting teeth). All data were calculated by statistical analysis and T-Test. The statistical data showed that in the sample of 10,075 children the incidence of MACBM was 5.04% (the rate of male was 5.73%; the female 4.32%); the baby teeth stage group 7.15%; the first stage of substituting teeth group 5.74%; the later stage 2.99%. One third of suffering children were caused by genetic factor. Two third were acquired. Among those postnatal caused, which was ground insufficient was the main cause (31.1) 17.9% and 14.5% of suffering children were caused by bad habits and bad feeding posture, respectively. It is worth paying attention to the fact that only 2% of suffering children went to see dentists and no one of 119 cases of baby teeth stage was treated by a orthodontists in the place like Beijing Western District where the medical conditions and cultural background are much better than other places in China.(ABSTRACT TRUNCATED AT 250 WORDS)

Anesthetic efficacy of the supplemental intraosseous injection for teeth with irreversible pulpitis.

PubMed

Parente, S A; Anderson, R W; Herman, W W; Kimbrough, W F; Weller, R N

1998-12-01

The purpose of this study was to determine the efficacy of a supplemental intraosseous injection (IOI) of 2% lidocaine with 1:100,000 epinephrine using the Stabident device, after conventional anesthetic methods had failed. Patients who experienced pain during endodontic access and required a supplemental IOI using 0.45 to 0.90 ml of the local anesthetic were identified. All 37 of the patients treated had teeth diagnosed with irreversible pulpitis. Thirty-four of the teeth were mandibular posterior teeth, 2 were maxillary posterior teeth, and 1 was a maxillary anterior tooth. Patients with maxillary teeth had received infiltration anesthesia, and those with mandibular teeth had received an inferior alveolar nerve block in conjunction with long buccal infiltration. A minimum of 3.6 ml of local anesthetic was used with the conventional techniques. Modified visual analogue scales, coupled with operator evaluations, were used to measure success. The Stabident IOI was an effective supplemental anesthetic technique in 89% (+/- 5.1) or 33/37 patients evaluated. The 95% confidence interval was 74 to 97%. The IOI was successful in 91% (+/- 4.9) of the mandibular posterior teeth (31/34), and 67% of the maxillary teeth (2/3).

Biologic restoration: a treatment option for reconstruction of anterior teeth.

PubMed

Babaji, Prashant; Khanna, Priyanka; S, Shankar; Chaurasia, Vishwajit Rampratap; Masamatti, Vinaykumar S

2014-11-01

Several procedures are advised to manage fractured anterior tooth structure using acrylic resin, composite restoration, ceramic or metal crown with ceramic facing. Biologic restoration is a procedure to restore fractured tooth structure with natural tooth material. In this in vitro case we have made an attempt for aesthetic rehabilitation of maxillary central incisor with similar biologic crown taken form extracted maxillary central incisor. It was observed that biologic restoration is an aesthetic, economical, fast and functional procedure which can be used as an alternative method to restore fractured primary or permanent anteriors.

Effects of overhead work involving different heights and distances on neck and shoulder muscle activity.

PubMed

Shin, Seung-Je; Yoo, Won-Gyu

2015-06-05

Although overhead work is closely related to musculoskeletal disorders, it is difficult to avoid these postures in daily working conditions. In industrial tasks that require elevated arm postures above shoulder height, flexibility in the location of the task is necessary. This study investigated the sternocleidomastoid, upper trapezius, lower trapezius, and anterior deltoid, serratus anterior muscle activities during overhead work involving four different height and distance locations performed by healthy adult participants. Eighteen young male right-hand-dominant workers were recruited. The right upper trapezius, lower trapezius, serratus anterior, anterior deltoid, and sternocleidomastoid muscle activities were measured under for overhead work condition (Location 1: overhead work with a height of 10 cm above the head of each subject and distance of 15 cm, Location 2: overhead work with a height of 10 cm above the head of each subject and distance of 30 cm, Location 3: overhead work with a height of 20 cm above the head of each subject and distance of 15 cm, Location 4: overhead work with a height of 20 cm above the head of each subject and distance of 30 cm). In Location 3, there was significantly higher neck extension range of motion compared to Location 1, Location 2 and Location 4. In Location 1, the activities of the upper trapezius, lower trapezius, serratus anterior, anterior deltoid, and sternocleidomastoid muscles were significantly lower than those in Location 3 (p<0.05). In Location 2, the activities of the upper trapezius, lower trapezius, serratus anterior, anterior deltoid, and sternocleidomastoid muscles were significantly lower than those in Location 4 (p<0.05). In Location 1, there were significantly lower upper trapezius, lower trapezius, serratus anterior, and anterior deltoid muscle activities than in Location 2 (p<0.05). In Location 3, there were significantly lower upper trapezius, lower trapezius, serratus anterior, and anterior deltoid muscle activities than in Location 4 (p<0.05). In Location 1, there was significantly higher sternocleidomastoid muscle activity than in Location 2 (p<0.05). Finally, In Location 3, there was significantly higher sternocleidomastoid muscle activity than in Location 4 (p<0.05). Overhead workers should engage in work that involves a low height and near distance. Height appears to be a stronger risk factor than distance in overhead work.

A comparison of the antibacterial activity of the two methods of photodynamic therapy (using diode laser 810 nm and LED lamp 630 nm) against Enterococcus faecalis in extracted human anterior teeth.

PubMed

Asnaashari, Mohammad; Mojahedi, Seyed Masoud; Asadi, Zahra; Azari-Marhabi, Saranaz; Maleki, Alireza

2016-03-01

Failure of endodontic treatment is usually due to an inadequate disinfection of the root canal system. Enterococcus faecalis has been widely used as a valuable microbiological marker for in-vitro studies because of its ability to colonize in a biofilm like style in root canals, invading dentinal tubules and resistance to some endodontic treatments. The aim of this study was to investigate the antibacterial effects of two methods of photodynamic therapy using a light emitting diode lamp (LED lamp, 630 nm) and a diode laser (810 nm) on E. faecalis biofilms in anterior extracted human teeth. Fifty six single-rooted extracted teeth were used in this study. After routine root canal cleansing, shaping and sterilization, the teeth were incubated with E. faecalis for a period of two weeks. Teeth were then divided into two experimental groups (nu=23) and two control groups (nu=5). Teeth in one experimental group were exposed to a diode laser (810 nm), and in the other group samples were exposed to a LED lamp (630 nm). Intracanal bacterial sampling was done, and bacterial survival rate was then evaluated for each group. The Colony Forming Unit (CFU) in LED group (log10 CFUs=4.88±0.82) was significantly lower than the laser group (log CFUs=5.49±0.71) (p value=0.021). CFUs in positive control group (Log10 CFUs=10.96±0.44) were significantly higher than the treatment group (p˂0.001). No bacterial colony was found in negative control group. The results of this research show that photodynamic therapy could be an effective supplement in root canal disinfection. PDT using LED lamp was more effective than diode laser 810 nm in reducing CFUs of E. faecalis in human teeth. Copyright © 2015 Elsevier B.V. All rights reserved.

Aspects of masticatory form and function in common tree shrews, Tupaia glis.

PubMed

Fish, D R

1983-04-01

Tree shrews have relatively primitive tribosphenic molars that are apparently similar to those of basal eutherians; thus, these animals have been used as a model to describe mastication in early mammals. In this study the gross morphology of the bony skull, joints, dentition, and muscles of mastication are related to potential jaw movements and cuspal relationships. Potential for complex mandibular movements is indicated by a mobile mandibular symphysis, shallow mandibular fossa that is large compared to its resident condyle, and relatively loose temporomandibular joint ligaments. Abrasive tooth wear is noticeable, and is most marked at the first molars and buccal aspects of the upper cheek teeth distal to P2. Muscle morphology is basically similar to that previously described for Tupaia minor and Ptilocercus lowii. However, in T. glis, an intraorbital part of deep temporalis has the potential for inducing lingual translation of its dentary, and the large medial pterygoid has extended its origin anteriorly to the floor of the orbit, which would enhance protrusion. The importance of the tongue and hyoid muscles during mastication is suggested by broadly expanded anterior bellies of digastrics, which may assist mylohyoids in tensing the floor of the mouth during forceful tongue actions, and by preliminary electromyography, which suggests that masticatory muscles alone cannot fully account for jaw movements in this species.

Comparative fixation methods of cervical disc arthroplasty versus conventional methods of anterior cervical arthrodesis: serration, teeth, keels, or screws?

PubMed

Cunningham, Bryan W; Hu, Nianbin; Zorn, Candace M; McAfee, Paul C

2010-02-01

Using a synthetic vertebral model, the authors quantified the comparative fixation strengths and failure mechanisms of 6 cervical disc arthroplasty devices versus 2 conventional methods of cervical arthrodesis, highlighting biomechanical advantages of prosthetic endplate fixation properties. Eight cervical implant configurations were evaluated in the current investigation: 1) PCM Low Profile; 2) PCM V-Teeth; 3) PCM Modular Flange; 4) PCM Fixed Flange; 5) Prestige LP; 6) Kineflex/C disc; 7) anterior cervical plate + interbody cage; and 8) tricortical iliac crest. All PCM treatments contained a serrated implant surface (0.4 mm). The PCM V-Teeth and Prestige contained 2 additional rows of teeth, which were 1 mm and 2 mm high, respectively. The PCM Modular and Fixed Flanged devices and anterior cervical plate were augmented with 4 vertebral screws. Eight pullout tests were performed for each of the 8 conditions by using a synthetic fixation model consisting of solid rigid polyurethane foam blocks. Biomechanical testing was conducted using an 858 Bionix test system configured with an unconstrained testing platform. Implants were positioned between testing blocks, using a compressive preload of -267 N. Tensile load-to-failure testing was performed at 2.5 mm/second, with quantification of peak load at failure (in Newtons), implant surface area (in square millimeters), and failure mechanisms. The mean loads at failure for the 8 implants were as follows: 257.4 +/- 28.54 for the PCM Low Profile; 308.8 +/- 15.31 for PCM V-Teeth; 496.36 +/- 40.01 for PCM Modular Flange; 528.03+/- 127.8 for PCM Fixed Flange; 306.4 +/- 31.3 for Prestige LP; 286.9 +/- 18.4 for Kineflex/C disc; 635.53 +/- 112.62 for anterior cervical plate + interbody cage; and 161.61 +/- 16.58 for tricortical iliac crest. The anterior plate exhibited the highest load at failure compared with all other treatments (p < 0.05). The PCM Modular and Fixed Flange PCM constructs in which screw fixation was used exhibited higher pullout loads than all other treatments except the anterior plate (p < 0.05). The PCM VTeeth and Prestige and Kineflex/C implants exhibited higher pullout loads than the PCM Low Profile and tricortical iliac crest (p < 0.05). Tricortical iliac crest exhibited the lowest pullout strength, which was different from all other treatments (p < 0.05). The surface area of endplate contact, measuring 300 mm(2) (PCM treatments), 275 mm(2) (Prestige LP), 250 mm(2) (Kineflex/C disc), 180 mm(2) (plate + cage), and 235 mm(2) (tricortical iliac crest), did not correlate with pullout strength (p > 0.05). The PCM, Prestige, and Kineflex constructs, which did not use screw fixation, all failed by direct pullout. Screw fixation devices, including anterior plates, led to test block fracture, and tricortical iliac crest failed by direct pullout. These results demonstrate a continuum of fixation strength based on prosthetic endplate design. Disc arthroplasty constructs implanted using vertebral body screw fixation exhibited the highest pullout strength. Prosthetic endplates containing toothed ridges (>or= 1 mm) or keels placed second in fixation strength, whereas endplates containing serrated edges exhibited the lowest fixation strength. All treatments exhibited greater fixation strength than conventional tricortical iliac crest. The current study offers insights into the benefits of various prosthetic endplate designs, which may potentially improve acute fixation following cervical disc arthroplasty.

Restoring Anterior Aesthetics by a Rotational Path Cast Partial Denture: An Overlooked Technique

PubMed Central

Bhat, Bala Saraswati; Arora, Himanshu

2016-01-01

Cast Partial Dentures (CPD) has long been known to restore missing teeth in patients with minimal invasion on hard and soft tissues. Although satisfactory otherwise, the main concern in CPD is the anterior display of metal. Also the technique sensitive lab procedures, together with the esthetic concern have built an iceberg around the frequent utilization of this treatment modality. With the advent of various techniques to get rid of the metallic display, it was predicted to have more CPD’s done in the dental arena. But the conceptual technicalities of the procedure took away the limelight from this treatment modality and focused on the fixed prosthodontics. Although feasible in a large number of patients, fixed prosthesis still has areas of restriction. It is here, when we apply our knowledge and skill of esthetic CPD. Esthetic CPD eliminates the metal display by utilizing desirable undercuts. The engaging action of the framework into these undercuts paves way for a rotational motion to seat the remaining prosthesis. Hence dual path of insertion helps eliminating the anterior clasp. In this case report dual path of insertion is discussed for replacing anterior teeth in an old male patient who had mild esthetic concerns. Following the conservative approach of CPD (over FPD) esthetic and restorative treatment was planned with patient’s consent. PMID:27437375

Maxillary implant-supported overdentures opposed by (partial) natural dentitions: a 5-year prospective case series study.

PubMed

Boven, G C; Slot, J W A; Raghoebar, G M; Vissink, A; Meijer, H J A

2017-12-01

The aim of this study was to assess the 5-year treatment outcome of maxillary implant-retained overdentures opposed by natural antagonistic teeth. Fifty consecutive patients received maxillary overdentures supported by six dental implants. Implants were placed in the anterior region, if enough bone was present (n = 25 patients) Implant were placed in the posterior region if implant placement in the anterior region was not possible (n = 25 patients). Variables assessed included survival of implants, condition of hard and soft peri-implant tissues and patients' satisfaction. The five-year implant survival rate was 97·0% and 99·3%, and mean radiographic bone loss was 0·23 and 0·69 mm in the anterior and posterior group, respectively. Median scores for plaque, calculus, gingiva, bleeding and mean scores for pocket probing depth were low and stayed low. Patients' satisfaction after treatment was high in both groups. Within the limits of this 5-year study, it is concluded that six dental implants (placed in the anterior or posterior region) connected with a bar and opposed to natural antagonistic teeth result in acceptable results for clinical parameters and good outcomes for marginal bone level changes and patient satisfaction. © 2017 John Wiley & Sons Ltd.

Anterior dental microwear textures show habitat-driven variability in Neandertal behavior.

PubMed

Krueger, Kristin L; Ungar, Peter S; Guatelli-Steinberg, Debbie; Hublin, Jean-Jacques; Pérez-Pérez, Alejandro; Trinkaus, Erik; Willman, John C

2017-04-01

The causes of Neandertal anterior tooth wear patterns, including labial rounding, labial scratches, and differential anterior-posterior wear, have been debated for decades. The most common explanation is the "stuff-and-cut" hypothesis, which describes Neandertals clamping down on a piece of meat and slicing a portion close to their lips. "Stuff-and-cut" has been accepted as a general aspect of Neandertal behavior without fully assessing its variability. This study analyzes anterior dental microwear textures across habitats, locations, and time intervals to discern possible variation in Neandertal anterior tooth-use behavior. Forty-five Neandertals from 24 sites were analyzed, represented by high-resolution replicas of permanent anterior teeth. The labial surface was scanned for antemortem microwear using a white-light confocal profiler. The resultant 3D-point clouds, representing 204 × 276 μm for each specimen, were uploaded into SSFA software packages for texture characterization. Statistical analyses, including MANOVAs, ANOVAs, and pairwise comparisons, were completed on ranked microwear data. Neandertal descriptive statistics were also compared to 10 bioarchaeological samples of known or inferred dietary and behavioral regimes. The Neandertal sample varied significantly by habitat, suggesting this factor was a principal driving force for differences in Neandertal anterior tooth-use behaviors. The Neandertals from open habitats showed significantly lower anisotropy and higher textural fill volume than those inhabiting more closed, forested environments. The texture signature from the open-habitat Neandertals was most similar to that of the Ipiutak and Nunavut, who used their anterior teeth for intense clamping and grasping behaviors related to hide preparation. Those in more closed habitats were most similar to the Arikara, who did not participate in non-dietary behaviors. These Neandertal individuals had a broad range of texture values consistent with non-dietary and dietary behaviors, suggesting they varied more in anterior tooth-use behaviors and exploited a wider variety of plant and animal resources than did those from open habitats. Copyright © 2017 Elsevier Ltd. All rights reserved.

Clinical guide to periodontology: part 3. Multidisciplinary integrated treatment.

PubMed

Palmer, R M; Ide, M; Floyd, P D

2014-05-01

The establishment of periodontal health should be a primary aim in all treatment plans. The methods by which this can be achieved have been dealt with in previous chapters, but there are a number of situations where integration of these treatment methods with other dental disciplines needs to be clarified. To simplify matters this chapter will consider periodontal implications in three main areas: treatment of drifted anterior teeth, pre-restorative procedures and replacement of missing teeth.

Dysomma alticorpus, a new species of cutthroat eel from the Gulf of Aqaba, Red Sea (Teleostei: Synaphobranchidae).

PubMed

Fricke, Ronald; Golani, Daniel; Appelbaum-Golani, Brenda; Zajonz, Uwe

2018-02-01

The cutthroat eel Dysomma alticorpus n. sp. is described based on a single specimen collected in a trammel net at a depth of 350m off Eilat, Israel, Gulf of Aqaba, Red Sea. The new species belongs to the Dysomma anguillare species complex, which comprises species possessing a well-developed pectoral fin, intermaxillary teeth, a uniserial row of 7-15 large compound teeth in the lower jaw (which may be followed by a few smaller teeth), and an anteriorly situated anus with the trunk shorter than the head length. It is characterised by a combination of the following characters: origin of the dorsal fin well anterior to the base of the pectoral fin, predorsal length 13.8% TL; preanal length 22.8% TL; three compound teeth on the vomer; head pores: IO 4, SO 3; M 6; POP 0; AD 1, F 0, ST 0; lateral-line pores: predorsal 4, prepectoral 8, preanal 14, total 57-58, the last at the posterior two-thirds of the total length; MVF 7-16-115; total vertebrae 115. Dysomma alticorpus n. sp. is compared with other species of the genus. A revised key to the species of the genera Dysomma and Dysommina is provided. Copyright © 2018 Académie des sciences. Published by Elsevier Masson SAS. All rights reserved.

Dental Treatment Needs among Children and Adolescents Residing in an Ugandan Orphanage.

PubMed

Rubin, Pessia Friedman; Winocur, Ephraim; Erez, Assaf; Birenboim-Wilensky, Ravit; Peretz, Benjamin

Previous studies focused on the dental caries status of East African children and not on their overall dental needs. Urban children consume more sugar-rich foods. To assess overall dental treatment needs of children living in an orphanage in Uganda. Teeth were diagnosed as needing treatment by obvious frank carious lesions (WHO criteria), temporary fillings, staining, or very deep pit and/or fissures possibly requiring sealants. Calculus or crowding in the mandibular anterior region and evidence of tooth fractures were recorded, as were signs of wear on the mandibular molars and canines and the maxillary incisors. Most of the primary teeth (64%) required no dental treatment, but almost all (98%) of the permanent teeth did. A mean (±standard deviation) of 4.81±1.92 permanent teeth required treatment. The mean number of missing teeth was 0.47. Thirty-one children (20.2%) had crowding, 52 (34%) had calculus, and 49 (32%) had signs of attrition on primary and permanent molar teeth (45 enamel only and 4 enamel and dentin). Most of the primary teeth required no dental treatment, while the vast majority of permanent teeth did, possibly in association with high sugar cane consumption and poor brushing habits among older children.

Supernumerary Teeth in Primary Dentition and Early Intervention: A Series of Case Reports

PubMed Central

Bahadure, Rakesh N.; Thosar, Nilima; Jain, Eesha S.; Kharabe, Vidhi; Gaikwad, Rahul

2012-01-01

Supernumerary teeth are considered as one of the most significant dental anomalies during the primary and early mixed dentition stages. They are of great concern to the dentists and parents because of the eruption, occlusal, and esthetic problems they can cause. Supernumerary teeth occur more frequently in the permanent dentition but rarely in primary dentition. Mesiodens is the most common type of supernumerary teeth but rarely seen in lower arch. Early recognition and diagnosis of supernumerary teeth is important to prevent further complications in permanent dentition. Four cases of supernumerary teeth with mesiodens in upper and lower arch in primary dentition and their management have been discussed. PMID:22888456

Unilateral distalization of a maxillary molar with sliding mechanics: a case report.

PubMed

Keles, Ahmet

2002-06-01

A unilateral Class II relationship could arise due to early loss of an upper second deciduous molar on one side during the mixed dentition period. This would allow the mesial drift of the molars, which may block the eruption of the second premolar. A 15-year 8-month-old male patient presented with a Class II molar relationship on the right, and Class I canine and molar relationship on the left side. His E was extracted when he was 5 years old. The 54 were impacted and the 3 was ectopically positioned due to the space loss from the mesial migration of the 76. In addition 21 1 were in cross-bite. Skeletally he had Class III tendency with low MMPA. He presented with a straight profile and retruded upper lip. For maxillary molar distalization, a newly developed 'Keles Slider' was used. The appliance was composed of one premolar and two molar bands, and the anchorage unit was composed of a wide Nance button. 46 were connected to the Nance button and, therefore, included into the anchorage unit. The point of distal force application was close to the centre of resistance of the 6 and parallel to the occlusal plane. Ni-Ti coil springs were used and 200 g of distal force was applied. Seven months later the space required for eruption of the permanent premolars and canine was regained, and the anterior cross-bite corrected. The appliance was removed and final alignment of the teeth was achieved with fixed appliances. At the end of the second phase treatment Class I molar and canine relationship was achieved on the both sides, the anterior cross-bite was corrected, inter-incisal angle was improved, and ideal overbite and overjet relationship was achieved. The active treatment time was 27 months.

The decision to repair or replace a defective restoration is affected by who placed the original restoration: findings from the National Dental PBRN

PubMed Central

Gordan, Valeria V; Riley, Joseph; Geraldeli, Saulo; Williams, O. Dale; Spoto, Joseph C; Gilbert, Gregg H

2014-01-01

Objectives To evaluate how restoration characteristics are associated with the decision to repair or replace an existing restoration. The following hypotheses were studied: Dentists who placed the original restoration are more likely to repair instead of replace restorations (H1) that are in molar teeth; (H2) that are in the upper arch; (H3) that have amalgam restorative material; (H4) if a fracture is not the primary reason for the defect; and (H5) when the restoration comprises more than one surface. Methods This cross-sectional study used a consecutive patient/restoration recruitment design. 194 dentists members of a dental practice-based research network recorded data on restorations in permanent teeth that needed repair or replacement. Results For 6,623 of the 8,770 defective restorations in 6,643 patients, the treatment was provided by the dentist who had not placed the original restoration (75%). The 2-way interaction revealed that dentists who had placed the original restoration often chose to repair when the defective restoration was in a molar, relative to premolar or anterior teeth (OR = 2.2, p < .001); and chose to replace when the restoration had amalgam (OR = 0.5, p < .001), and when it was a fracture compared to another reason (OR = 0.8, p = 001). Conclusion Most dentists are not conservative when they revisit a restoration that they originally placed regardless of type of failure, number of surfaces or material used. However, dentists who had placed the original restoration were significantly more likely to repair it when the defective restoration was in a molar tooth. PMID:25223822

Esthetic evaluation of single-tooth implants in the anterior mandible.

PubMed

Hof, Markus; Tepper, Gabor; Koller, Barbara; Krainhöfner, Martin; Watzek, Georg; Pommer, Bernhard

2014-09-01

Single-tooth replacement of anterior mandibular teeth is frequently complicated by insufficient bucco-lingual bone width and limited mesio-distal space available for implant placement. The aim of the present study was to assess implant esthetics in the partially edentulous anterior mandible. Esthetic evaluation of 43 anterior mandibular single-tooth implants in 15 women and 28 men was performed using esthetic indices (PES = Pink Esthetic Score, PI = Papilla Index, SES = Subjective Esthetic Score) as well as subjective patients' Visual Analogue Scale (VAS) ratings. Clinical and radiological parameters (implant and crown dimensions, pocket depth, bleeding on probing, plaque, keratinized mucosa, marginal bone level, and distance to adjacent teeth) were tested for influence. Implant esthetics were judged satisfactory (PES ≤10) in 42% of implants compared with a patient satisfaction rate of 87%. Correlation between objective indices (PES/PI: rs  = 0.62, PES/SES: rs  = -0.73, PI/SES: rs  = -0.48) was highly significant (P ≤ 0.001); however, no association to subjective patients' ratings could be observed. Type of prosthetic restoration (single crown vs. tulip-shaped double crowns), mesio-distal crown width as well as anatomic crown length significantly affected esthetic scores. Patients' judgment, by contrast, could not be associated to any prognostic factor. Subjective patient satisfaction with implant esthetics in the partially edentulous anterior mandible is high, however, remains hard to predict or objectively quantify. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

A Neanderthal lower molar from Stajnia Cave, Poland.

PubMed

Dąbrowski, P; Nowaczewska, W; Stringer, C B; Compton, T; Kruszyński, R; Nadachowski, A; Stefaniak, K; Urbanowski, M

2013-04-01

The primary aim of this study was to conduct a taxonomic assessment of the second of three isolated human teeth found in the Stajnia Cave (north of the Carpathians, Poland) in 2008. The specimen was located near a human tooth (S5000), which was identified by Urbanowski et al. (2010) as a Neanderthal permanent upper molar. Both of these teeth were excavated from the D2 layer, which belongs to the D stratigraphic complex comprising the archaeological assemblage associated with the Micoquian tradition. An Ursus spelaeus bone and Mammuthus primigenius tooth that were also excavated from the D2 layer were dated to >49,000 years BP (by AMS (14)C) and 52.9 ka BP (by U-Th), respectively. The sediment overlying stratigraphic complex D was dated to 45.9 ka BP by the OSL method. The S4300 tooth is a lower first or second permanent molar belonging to an individual other than that who once possessed the S5000 tooth. The S4300 tooth exhibits a combination of traits typical of Neanderthal lower molars, including a mid-trigonid crest, large anterior fovea, taurodontism and subvertical grooves on the interproximal face, indicating that this tooth belonged to a Neanderthal individual. The S4300 tooth from Stajnia Cave is one of the oldest human remains found in Poland. Copyright © 2013 Elsevier GmbH. All rights reserved.

Sr-87/Sr-86 isotopic age determination of upper Cretaceous Santonian, Campanian and Maastrichtian chondrichthyan teeth of the Atlantic and Eastern Gulf Coastal Plains: Implications for sea level cyclicity and macrofossil time-averaging in depositional sequence lag deposits

NASA Astrophysics Data System (ADS)

Becker, Martin Andrew

1997-11-01

Unconformities and fossil rich layers are common elements in the stratigraphic architecture of upper Cretaceous sediments exposed on both the Atlantic and Eastern Gulf Coastal Plains. Contacts between the Eutaw Formation and Tombigbee Sands Member in Alabama, the Blufftown Formation and Cusseta Sands in Georgia and the Wenonah- Mt. Laurel and Navesink Formations in New Jersey are marked by erosional surfaces with overlying blankets and lenses of macrofossil residuum. These contacts correspond to bounding unconformities and transgressive lags separating Santonian-Campanian, lower Campanian-upper Campanian and Campanian-Maastrichtian depositional sequences. Regression and subsequent transgression of sea level at the top of these depositional sequences resulted in hydrodynamic sorting of sediments and fossils that had previously accumulated in shelf and lower shoreface paleoenvironments. Remobilization of sediments by shoreface retreat reworked fossil hard-parts which became concentrated above erosional surfaces as sea level rose. Because of the abundance of chondrichthyan, pelecypod and ammonite fossils, these lags have great biostratigraphic significance and provide a basis for examining time averaging in macrofossil zonation. Chondrichthyan teeth are composed of extremely durable and highly insoluble, biogenic apatite. This tooth apatite accurately records the Sr87/Sr86 isotopic signature of seawater, from which the numerical age of the teeth can be calculated using published age/concentration data. Teeth (e.g. Squalicorax kaupi, Scapanorhynchus texanus) from Santonian-Campanian lag deposits at the contact of the Eutaw Formation and Tombigbee Sands Member in Alabama yield approximate ages of 85-81 Ma. Teeth from lower-upper Campanian lag deposits at the contact of the Blufftown Formation and Cusseta Sands in Georgia yield approximate ages of 83-75 Ma. Teeth from Campanian-Maastrichtian lag deposits at the contact of the Wenonah-Mt. Laurel and Navesink Formations in New Jersey yield approximate ages of 80-76 Ma. Isotopic age determination from these chondrichthyan teeth indicate average hiatus of approximately 3-7 million years occur during the development of lag accumulations and transgressive unconformities. Santonian, Campanian and Maastrichtian macrofossils analyzed in this study are hydrodynamically stable components representing time-averaged fossil assemblages sorted together by physical processes and are not life cohorts. Abrupt appearance and disappearance of organisms found in upper Cretaceous lag deposits of the Atlantic and Eastern Gulf Coastal Plains are artifacts of a physical sorting processes associated with sea-level cyclicity.

Scapular kinematic and shoulder muscle activity alterations after serratus anterior muscle fatigue.

PubMed

Umehara, Jun; Kusano, Ken; Nakamura, Masatoshi; Morishita, Katsuyuki; Nishishita, Satoru; Tanaka, Hiroki; Shimizu, Itsuroh; Ichihashi, Noriaki

2018-02-23

Although the serratus anterior muscle has an important role in scapular movement, no study to date has investigated the effect of serratus anterior fatigue on scapular kinematics and shoulder muscle activity. The purpose of this study was to clarify the effect of serratus anterior fatigue on scapular movement and shoulder muscle activity. The study participants were 16 healthy men. Electrical muscle stimulation was used to fatigue the serratus anterior muscle. Shoulder muscle strength and endurance, scapular movement, and muscle activity were measured before and after the fatigue task. The muscle activity of the serratus anterior, upper and lower trapezius, anterior and middle deltoid, and infraspinatus muscles was recorded, and the median power frequency of these muscles was calculated to examine the degree of muscle fatigue. The muscle endurance and median power frequency of the serratus anterior muscle decreased after the fatigue tasks, whereas the muscle activities of the serratus anterior, upper trapezius, and infraspinatus muscles increased. External rotation of the scapula at the shoulder elevated position increased after the fatigue task. Selective serratus anterior fatigue due to electric muscle stimulation decreased the serratus anterior endurance at the flexed shoulder position. Furthermore, the muscle activities of the serratus anterior, upper trapezius, and infraspinatus increased and the scapular external rotation was greater after serratus anterior fatigue. These results suggest that the rotator cuff and scapular muscle compensated to avoid the increase in internal rotation of the scapula caused by the dysfunction of the serratus anterior muscle. Copyright © 2018 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Camouflage treatment of skeletal Class III malocclusion with multiloop edgewise arch wire and modified Class III elastics by maxillary mini-implant anchorage.

PubMed

He, Shushu; Gao, Jinhui; Wamalwa, Peter; Wang, Yunji; Zou, Shujuan; Chen, Song

2013-07-01

To evaluate the effect of the multiloop edgewise arch wire (MEAW) technique with maxillary mini-implants in the camouflage treatment of skeletal Class III malocclusion. Twenty patients were treated with the MEAW technique and modified Class III elastics from the maxillary mini-implants. Twenty-four patients were treated with MEAW and long Class III elastics from the upper second molars as control. Lateral cephalometric radiographs were obtained and analyzed before and after treatment, and 1 year after retention. Satisfactory occlusion was established in both groups. Through principal component analysis, it could be concluded the anterior-posterior dental position, skeletal sagittal and vertical position, and upper molar vertical position changed within groups and between groups; vertical lower teeth position and Wits distance changed in the experimental group and between groups. In the experimental group, the lower incisors tipped lingually 2.7 mm and extruded 2.4 mm. The lingual inclination of the lower incisors increased 3.5°. The mandibular first molars tipped distally 9.1° and intruded 0.4 mm. Their cusps moved 3.4 mm distally. In the control group, the upper incisors proclined 3°, and the upper first molar extruded 2 mm. SN-MP increased 1.6° and S-Go/N-ME decreased 1. The MEAW technique combined with modified Class III elastics by maxillary mini-implants can effectively tip the mandibular molars distally without any extrusion and tip the lower incisors lingually with extrusion to camouflage skeletal Class III malocclusions. Clockwise rotation of the mandible and further proclination of upper incisors can be avoided. The MEAW technique and modified Class III elastics provided an appropriate treatment strategy especially for patients with high angle and open bite tendency.

Camouflage treatment for class III malocclusion combined with traction of an impacted maxillary central incisor.

PubMed

Closs, Luciane Quadrado; Mundstock, Karina Santos; Ribeiro, Darlene Santos; Reston, Eduardo Galia; Silva, Aurelício Novaes

2010-01-01

This case report describes the treatment of a patient with an unerupted maxillary left central incisor, class III malocclusion with crossbite of the maxillary posterior teeth and lateral open bite. Treatment consisted of rapid maxillary expansion followed by anterior space opening, maxillary protraction and traction of the unerupted teeth with a light force system. Favorable results were obtained in terms of correcting incisor position and class III malocclusion. The results achieved remained stable throughout a 4-year retention period.

An Innovative Approach for Management of Vertical Coronal Fracture in Molar: Case Report

PubMed Central

Kathuria, Ambica; Kavitha, M.; Ravishankar, P.

2012-01-01

Unlike anterior teeth, acute exogenous trauma is an infrequent cause of posterior coronal vertical tooth fractures. Endodontic and restorative management of such fractures is a great challenge for the clinician. Newer advancements in adhesive techniques can provide successful intracoronal splinting of such teeth to reinforce the remaining tooth structure. This paper describes the diagnosis and management of a case of complicated vertical coronal fracture in mandibular first molar induced by a traffic accident. PMID:22567453

[Prevalence of cross-bite in Mexican children].

PubMed

Ojeda León, S; De la Teja Angeles, E

1990-10-01

As observed, the problem of lining and accommodation of teeth in the child population is increasingly larger. This fact prompted the authors to attempt determining the prevalence of cross-bite in a sample of Mexican children. A total of 306 patients, aged between two and 17 and attending the Stomatology service of the National Institute of Pediatrics, were evaluated, from which all pertinent data regarding age, sex, molar-temporal relationship (terminal, rectus, distal, messial and exaggerated messial planes), permanent molar status (Angle I, II, III), cross-bite, type of dentition affected (primary, mixed or permanent), cross-bite classification (anterior, posterior or mixed), whether unilateral, bilateral, dental or skeletal, right or left, and number of teeth affected, were duly recorded. Out of 306 evaluated patients (160 males, 146 female), 112 evidenced cross-bite (36.6%), 56 of each sex; in 69.6% the teeth were anterior, in 17.8% they were posterior, and in 15.5% their position was mixed. Their average age was 8 years, and malocclusion was Angle class I. From this experience, it is to be concluded that early detection and correction of any dental occlusion abnormality will permit correcting defects in dentofacial development; it is thus necessary to ascertain the frequency of cross-bite.

En-masse protraction of mandibular posterior teeth into missing mandibular lateral incisor spaces using a fixed functional appliance.

PubMed

Chhibber, Aditya; Upadhyay, Madhur

2016-11-01

Protraction of mandibular posterior teeth requiring absolute anchorage has always been a challenge, especially when the space is located in the anterior region, since more teeth must be protracted. Traditionally, skeletal anchorage devices have been used for anchorage reinforcement during protraction. However, drawbacks such as requirement of a surgical step, inability to tolerate heavy forces, and patient willingness to undergo such surgical procedures can be limiting factors. Additionally, the mechanics involved can sometimes create undesirable side effects, thereby limiting their application in such situations. This report describes the use of a fixed functional appliance as an anchorage-reinforcement device for en-masse protraction of mandibular posterior teeth into a missing lateral incisor space. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Force Eruption of Mandibular Second Incisor in an 11- Year Old Boy: A Technical Report

PubMed Central

Sobhnamayan, F; Moazami, F; Hamedi, S; Meshki, R

2013-01-01

There is a great challenge in the treatment of deeply fractured and un-restorable teeth among dentists. Orthodontic force eruption is a method of treatment for these teeth to preserve natural root system and periodontal structures. This technical report is a new modification of this procedure presented in an 11- year old boy with deeply fractured left second mandibular incisor. The fractured teeth were treated with root canal therapy and a file #80 was modified to become a hook cemented into the fractured tooth. Anterior teeth were splinted and used as anchorage to help the root extrusion. 1-year follow up of the tooth showed the convenience of the treatment. This simple and low-cost method can be an acceptable alternative to the current high cost techniques, achieving the same results. PMID:24724126

Bilateral Mandibular Paramolars

PubMed Central

Dhull, Rachita Singh; Panda, Swagatika; Acharya, Sonu; Yadav, Shweta; Mohanty, Gatha

2014-01-01

ABSTRACT Supernumerary tooth is a developmental anomaly and has been argued to arise from multiple etiologies. These teeth may remain embedded in the alveolar bone or can erupt into the oral cavity. They can cause a variety of complications in the develo­ping dentition. Supernumerary teeth can present in various forms and in any region of the mandible or maxilla, but have a predisposition for the anterior maxilla. Here is the presentation of a case of unusual location of supernumerary teeth located in between mandibular first and second molar region bilaterally. How to cite this article: Dhull KS, Dhull RS, Panda S, Acharya S, Yadav S, Mohanty G. Bilateral Mandibular Paramolars. Int J Clin Pediatr Dent 2014;7(1):40-42. PMID:25206236

Bilateral mandibular paramolars.

PubMed

Dhull, Kanika Singh; Dhull, Rachita Singh; Panda, Swagatika; Acharya, Sonu; Yadav, Shweta; Mohanty, Gatha

2014-01-01

Supernumerary tooth is a developmental anomaly and has been argued to arise from multiple etiologies. These teeth may remain embedded in the alveolar bone or can erupt into the oral cavity. They can cause a variety of complications in the develo-ping dentition. Supernumerary teeth can present in various forms and in any region of the mandible or maxilla, but have a predisposition for the anterior maxilla. Here is the presentation of a case of unusual location of supernumerary teeth located in between mandibular first and second molar region bilaterally. How to cite this article: Dhull KS, Dhull RS, Panda S, Acharya S, Yadav S, Mohanty G. Bilateral Mandibular Paramolars. Int J Clin Pediatr Dent 2014;7(1):40-42.

Three new species of Parapercis (Perciformes: Pinguipedidae) and first records of P. muronis (Tanaka, 1918) and P. rubromaculata Ho, Chang Shao, 2012 from Australia.

PubMed

Johnson, Jeffrey W; Wilmer, Jessica Worthington

2018-03-01

Three new species of pinguipedid fishes from northern Australia are described based on specimens collected by deep water demersal trawling. Parapercis algrahami sp. nov. is recorded from off Dunk Island, Qld, south to Newcastle, NSW, in 67-333 m. It is distinct in having five narrow transverse dark bars across the upper body and a dark spot dorsally on the caudal-fin base, 6 canine teeth in outer row at front of lower jaw, palatines with 1-2 rows of teeth, and predorsal scales extending far forward on the nape to the posterior portion of the interorbital region. Parapercis imamurai sp. nov. is recorded from off Saumarez Reef, Qld, south to off Coffs Harbour, NSW, in 256-405 m. It is unique in having colouration that includes a broad dusky bar from lower margin of eye across the suborbital region and three broad dusky bands crossing the body between the middle of the soft dorsal-fin and the caudal-fin base, 10 canine teeth in outer row at front of lower jaw, and the fifth dorsal-fin spine longest. Parapercis pogonoskii sp. nov. is unique in having a combination of three reddish-brown vertical bars on the upper body between the anterior and posterior portions of the soft dorsal fin, the soft dorsal fin with two large dusky blotches and caudal-fin base with a dusky blotch in the upper corner, 8-10 canine teeth in outer row at front of lower jaw, fifth dorsal-fin spine longest, angle of subopercle with a single broad spine, and angle of preopercle with 4-5 large widely-separated spines. Comparison of the mitochondrial cytochrome c oxidase subunit 1 (CO 1) genetic marker utilised in DNA barcoding produced significant genetic divergences of at least 8.1% and 14.1% between P. algrahami sp. nov. and P. pogonoskii sp. nov. respectively and their closest sampled congeners.        The geographic range of Parapercis rubromaculata Ho, Chang Shao, 2012 is extended from Taiwan to the southern hemisphere waters off Western Australia, based on specimens collected from Shark Bay, north to Ashmore Terrace, in depths of 56-107 m. A revised diagnosis for the species is presented, meristic, morphometric and DNA barcoding data for the two populations are compared, and a detailed description of the colouration of fresh and preserved specimens from Australia is provided. Previous records of Parapercis macrophthalma (Pietschmann, 1911) from Western Australia are established as misidentifications of Parapercis muronis (Tanaka, 1918) and the latter is thereby confirmed from the southern hemisphere and Australian waters for the first time. Comparative meristic, morphometric and DNA barcoding data is provided for populations of P. muronis from Japan, Philippines and Western Australia.

Middle Pleistocene Climate Change Recorded in Fossil Mammal Teeth from Tarija, Bolivia, and Upper Limit of the Ensenadan Land-Mammal Age

NASA Astrophysics Data System (ADS)

MacFadden, Bruce J.

2000-07-01

Fossiliferous middle Pleistocene sediments of the Tarija basin of southern Bolivia contain a classic Ensenadan land-mammal fauna. New carbon isotopic data reported here for 50 specimens of the grazing mammals Equus (horse) and Cuvieronius (mastodon), documented from eight stratigraphic levels at Tarija, vary significantly in the δ13C values of their teeth. The pattern of variation appears to reflect the proportion of C3 and C4 grasses eaten during colder (more C3) and warmer (more C4) times. Within age limits set by associated magnetostratigraphy, the cold periods can be correlated with particular even-numbered stages in the marine oxygen-isotope record, and the warm periods can be correlated with odd-numbered stages. The oldest fossil teeth analyzed from the Tarija section can thereby be assigned to stage 29, and the youngest to stages 17 or 15, that is; the teeth range in age from about 1.1 myr to as young as 0.7 myr. Based on correlation of the upper part of the Tarija beds to the isotopic stages, the upper limit of the Ensenadan land-mammal age is between 0.7 and 0.6 myr, which is younger than stated in most previous studies.

Comparison of upper extremity kinematics in children with spastic diplegic cerebral palsy using anterior and posterior walkers.

PubMed

Strifling, Kelly M B; Lu, Na; Wang, Mei; Cao, Kevin; Ackman, Jeffrey D; Klein, John P; Schwab, Jeffrey P; Harris, Gerald F

2008-10-01

This prospective study analyzes the upper extremity kinematics of 10 children with spastic diplegic cerebral palsy using anterior and posterior walkers. Although both types of walkers are commonly prescribed by clinicians, no quantitative data comparing the two in regards to upper extremity motion has been published. The study methodology included testing of each subject with both types of walkers in a motion analysis laboratory after an acclimation period of at least 1 month. Overall results showed that statistically, both walkers are relatively similar. With both anterior and posterior walkers, the shoulders were extended, elbows flexed, and wrists extended. Energy expenditure, walking speed and stride length was also similar with both walker types. Several differences were also noted although not statistically significant. Anterior torso tilt was reduced with the posterior walker and shoulder extension and elbow flexion were increased. Outcomes analysis indicated that differences in upper extremity torso and joint motion were not dependent on spasticity or hand dominance. These findings may help to build an understanding of upper extremity motion in walker-assisted gait and potentially to improve walker prescription.

Evaluation of Nd:YAG laser on partial oxygen saturation of pulpal blood in anterior hypersensitive teeth.

PubMed

Birang, Reza; Kaviani, Naser; Mohammadpour, Mehdi; Abed, Ahmad Moghareh; Gutknecht, Norbert; Mir, Maziar

2008-07-01

Dentine hypersensitivity has of long been known to be a common clinical problem in dental practices. Lasers have recently come to play a prominent role in the treatment of this disorder. They might, however, cause dental pulp damage. This study was conducted to evaluate the effect of Nd:yttrium-aluminum-garnet (YAG) laser on partial oxygen saturation of pulpal blood in sensitive anterior teeth. In this clinical trial, 65 hypersensitive teeth were selected and randomly allocated to two groups. The study group involved Nd:YAG laser treatment, while no treatment was employed for the control group. Using a pulse oximetry system, evaluations were preformed of the partial oxygen saturation in the pulpal blood before, immediately after, 1 week after, and 1 month after the treatment. The results were analyzed using the SPSS software and repeated-measures analysis of variance and paired-samples t tests. The mean partial oxygen saturation of the blood was found to be 85.4% in the study group, which was not significantly different from that of the control group. No significant differences were observed in the control group between the means obtained from pretreatment and post-treatment intervals (P > 0.05). The Post-treatment partial oxygen saturation mean rose to 89.3% (P = 0.001) and remained constant throughout the following week after it. However, no significant differences were found between the pretreatment partial oxygen saturation mean and the same measurement 1 month after treatment (P = 0.702). Nd:YAG laser therapy for dentine desensitization of anterior teeth caused no persistent changes in the partial oxygen saturation of pulpal blood. It may, therefore, be concluded that the diffusion of heat induced by the Nd:YAG laser into the pulp within the limit of the desensitization parameters cause no irreversible damages in the dental pulp.

Ultrathin CAD-CAM Ceramic Occlusal Veneers and Anterior Bilaminar Veneers for the Treatment of Moderate Dental Biocorrosion: A 1.5-Year Follow-Up.

PubMed

Resende, T H; Reis, K R; Schlichting, L H; Magne, P

2018-03-27

Dental biocorrosion can produce a devastating impact on oral health. The restorative phase of the treatment should not cause additional damage of the remaining sound tooth structure. Ultrathin occlusal veneers are a conservative alternative to traditional onlays and complete crowns for the treatment of severe biocorrosive lesions. This strategy is explained in the present case report through a full-mouth rehabilitation of a patient with moderate biocorrosion. Maxillary anterior teeth were restored using the bilaminar technique (lingual direct composite veneers with labial ceramic veneers) and posterior teeth using ultrathin CAD-CAM ceramic occlusal veneers. The technical aspects required for the implementation of this new restorative design are presented with a special emphasis on the control of tooth preparation based on diagnostic wax-up, provisionalization, and the use of CAD-CAM technology.

[Thermometric diagnostics of chronic ulcerous pulpitis].

PubMed

Zvetkova, P; Mostrova, I

1989-01-01

Thermometric measurements were performed of 408 teeth of the upper and lower jaw with clinically confirmed initial and advanced stage of chronic ulcerous pulpitis in 398 subjects, aged from 18 to 30. Temperature elevation within the range from 1.4 to 3.2 degrees C was established in the initial form of chronic pulpitis and from 1 to 2.5 degrees C in advanced form of chronic pulpitis as compared with the norm. Significant difference in the temperature deviations exists in both forms of chronic pulpitis between the teeth of the upper and lower jaw.

Tissue Engineering of Necrotic Dental Pulp of Immature Teeth with Apical Periodontitis in Dogs: Radiographic and Histological Evaluation.

PubMed

El Ashiry, Eman A; Alamoudi, Najlaa M; El Ashiry, Mahmoud K; Bastawy, Hagar A; El Derwi, Douaa A; Atta, Hazem M

2018-05-15

To evaluate tissue engineering technology to regenerate pulp-dentin like tissues in pulp canals of immature necrotic permanent teeth with apical periodontitis in dogs. The study was performed on 36 teeth in 12 dogs. The experiment was carried out using split mouth design. In each dog 3 teeth were selected for implementing the study procedure. Apical periodontitis was induced in Group A and B teeth. Group (A): immature upper left 2 nd permanent incisors that were transplanted with a construct of autologous dental pulp stem cells with growth factors seeded in a chitosn hydrogel scaffold. Group (B): immature upper right 2 nd permanent incisor that received only growth factors with scaffold. A third tooth in each dog was selected randomly for isolation of dental pulp stem cells (DPSCs). Both groups were closed with a double coronal seal of white MTA (Mineral trioxide aggregate) and glass ionomer cement. Both groups were monitored radiographically for 4 months and histologically after sacrificing the animals. There was no statistically significant difference in radiographic findings between group (A) and group (B) for healing of radiolucencies, while there was statistically significant difference between group (A) and group (B) regarding radicular thickening, root lengthening and apical closure. Histologically, group (A) teeth showed regeneration of pulp-dentin like tissue while group (B) teeth did not show any tissue regeneration. Dental pulp stem cells and growth factors incorporated in chitosan hydrogel are able to regenerate pulp-dentine like tissue and help in complete root maturation of non-vital immature permanent teeth with apical periodontitis in dogs.

Evaluation of Currently Used Dental Management Indicators and Development of New Management and Performance Indicators.

DTIC Science & Technology

1981-07-01

for selected procedures g. Pericdontal Procedures Per Dentist Formula: Number of Perio Procedures Comr’.neted* Nunber of Dentists Assigned *See appendi...02336 - Resin, Complex A-2 Selected Endodontic Procedures for Endo teeth per assigned DDS ratio: 03311 - Anterior, 1 Canal Filled 03312 - Anterior, 2 or...04271 - Free Soft Tissue Graft 04272 - Vestibulo.-lasty 04340 - Perio Scale and Root Planning *Some or these procedures are not end-item entities as are

Clinical decisions for anterior restorations: the concept of restorative volume.

PubMed

Cardoso, Jorge André; Almeida, Paulo Júlio; Fischer, Alex; Phaxay, Somano Luang

2012-12-01

The choice of the most appropriate restoration for anterior teeth is often a difficult decision. Numerous clinical and technical factors play an important role in selecting the treatment option that best suits the patient and the restorative team. Experienced clinicians have developed decision processes that are often more complex than may seem. Less experienced professionals may find difficulties making treatment decisions because of the widely varied restorative materials available and often numerous similar products offered by different manufacturers. The authors reviewed available evidence and integrated their clinical experience to select relevant factors that could provide a logical and practical guideline for restorative decisions in anterior teeth. The presented concept of restorative volume is based on structural, optical, and periodontal factors. Each of these factors will influence the short- and long-term behavior of restorations in terms of esthetics, biology, and function. Despite the marked evolution of esthetic restorative techniques and materials, significant limitations still exist, which should be addressed by researchers. The presented guidelines must be regarded as a mere orientation for risk analysis. A comprehensive individual approach should always be the core of restorative esthetic treatments. The complex decision process for anterior esthetic restorations can be clarified by a systematized examination of structural, optical, and periodontal factors. The basis for the proposed thought process is the concept of restorative volume that is a contemporary interpretation of restoration categories and their application. © 2012 Wiley Periodicals, Inc.

[Finite element analysis of mechanical characteristics during retracting mandibular incisors through sliding mechanics].

PubMed

Gu, Yong-Jia; Wu, Yan-Ping; Gao, Mei-Qin; Yao, Ning; Chen, Wen-Jing

2008-10-01

To analyze the mechanical characteristic changes of teeth and arch under different loading direction during retracting mandibular incisors through implant, simulating clinical loading system. Three- dimensional finite element model, including brackets, archwire, crampable hooks and implants, was reconstructed. The force direction was determined by connecting the points in crampable hook and the center point of implant, and the force point and force direction were changed with the adjustment of the height of crampable hook and the height of implant. Then three-dimensional movement trend of teeth, stress distribution in periodontal membrane and the largest displacement of archwire nodes in each group were calculated and analyzed. SPSS13.0 software package was used for statistical analysis. It was found that the height of implant and the height of crampable hook were correlated with the movement of teeth and stress distribution in periodontal membrane (P<0.01). The movement trend of teeth in the condition of different height of implant and different height of crampable hook was illustrated as follows:(1)with the height increase of crampable hook, the movement trend of the central and lateral incisors varied from mesial lingual tipping to mesial labial tipping. However, canines tipped distally and lingually; the second premolars tipped mesially and lingually, and the first molar roots tipped distally and buccally with decreasing tipping angle. (2) The largest stress distribution in the whole arch was located in the labial apical one-third area of the lateral incisors, while that of canines and the first molars was located in the alveolar ridges and root bifurcations. These findings indicate that the different movement trend during retracting anterior teeth can be achieved through the adjustment of the height of crampable hook, and implant, anchorage can effectively control anterior movement of the posterior teeth. Supported by Research Fund of Bureau of Science and Technology of Nantong City (Grant No. S40023).

A randomized controlled trial to assess the pain associated with the debond of orthodontic fixed appliances

PubMed Central

Mangnall, Louise A R; Dietrich, Thomas; Scholey, John M

2013-01-01

Objective: To determine patient experience of pain during treatment with fixed orthodontic appliances, expectations of pain during debond and whether biting on a soft acrylic wafer during debond decreases pain experience. Design: Multicentre randomized controlled trial. Setting: Three UK hospital based orthodontic departments: Mid-Staffordshire NHS Foundation Trust, Birmingham Dental Hospital and University Hospital of North Staffordshire. Materials and methods: Ninety patients were randomly allocated to either the control (n = 45) or wafer group (n = 45). A visual analogue scale-based questionnaire was completed pre-debond to determine pain experience during treatment and expectations of pain during debond. The appliances were debonded and those in the wafer group bit on a soft acrylic wafer. A second questionnaire was completed post-debond to assess the pain experienced. Results: Biting on an acrylic wafer significantly reduced the pain experienced when debonding the posterior teeth (P≤0·05). Thirty-nine per cent found the lower anterior teeth the most painful. The expected pain was significantly greater than that actually experienced (P≤0·0001). Greater pain during treatment correlated with increased expectations and increased actually experienced pain (P≤0·0001). Conclusions: Biting on a soft acrylic wafer during debond of the posterior teeth reduces the pain experienced. The lower anterior teeth are the most painful. The pain expected is significantly greater than actually experienced. Patients who had greater pain during treatment expected and experienced greater pain at debond. PMID:24009318

Retrospective study of combined splinting restorations in the aesthetic zone of periodontal patients

PubMed Central

Liu, X.; Zhang, Y.; Zhou, Z.; Ma, S.

2016-01-01

Aims This retrospective study evaluated the clinical performance of combining a fiber-reinforced, composite-resin (FRC) bonded splint; bridge; fiber post; and/or resin veneer for the restoration of periodontally-involved anterior teeth. Methods Sixty-three patients with periodontally-involved anterior teeth each received one of the following splinting restorations: FRC-bonded splint-bridges (SB), a combination of an FRC-bonded splint and resin veneer (SV), or FRC-bonded splints (S). Six patients with healthy periodontal teeth received orthodontic retainers with FRC-bonded splints (OS) as a control. Modified USPHS criteria were used to evaluate the effects of rehabilitation, and the periodontal pocket depth (PPD) and clinical attachment level (CAL) of the natural teeth were measured. Results All restorations resulted in good aesthetic outcomes. SV, S in combination with fiber posts and OS all resulted in 100% acceptable ratings for each category that was directly evaluated at each follow-up. The mean PPD was 3.5 ± 1.0 mm at baseline, decreased to 3.3 ± 1.0 mm after one year (p <0.05), and subsequently increased to 3.5±1.0 mm again after four years (p >0.05). These changes were similar to those in the mean CAL. Conclusion A combination of a FRC-bonded splint, bridge, fiber post and/or resin veneer for minimally invasive prosthodontic treatment in the aesthetic zone is a good choice for periodontal patients. PMID:26964599

Evaluation of the Current Techniques and Introduction of a Novel Approach for Estimating Maxillary Anterior Teeth Dimensions.

PubMed

Sayed, Mohammed E; Porwal, Amit; Al-Faraj, Nida A; Bajonaid, Amal M; Sumayli, Hassan A

2017-07-01

Several techniques and methods have been proposed to estimate the anterior teeth dimensions in edentulous patients. However, this procedure remains challenging especially when preextraction records are not available. Therefore, the purpose of this study is to evaluate some of the existing extraoral and intraoral methods for estimation of anterior tooth dimensions and to propose a novel method for estimation of central incisor width (CIW) and length (CIL) for Saudi population. Extraoral and intraoral measurements were recorded for a total of 236 subjects. Descriptive statistical analysis and Pearson's correlation tests were performed. Association was evaluated between combined anterior teeth width (CATW) and interalar width (IAW), intercommisural width (ICoW) and interhamular notch distance (IHND) plus 10 mm. Evaluation of the linear relationship between central incisor length (CIL) with facial height (FH) and CIW with bizygomatic width (BZW) was also performed. Significant correlation was found between the CATW and ICoW and IAW (p-values <0.0001); however, no correlation was found relative to IHND plus 10 mm (p-value = 0.456). Further, no correlation was found between the FH and right CIL and BZW and right CIW (p-values = 0.255 and 0.822). The means of CIL, CIW, incisive papillae-fovea palatinae (IP-FP), and IHND were used to estimate the central incisor dimensions: CIL = FP-IP distance/4.45, CIW = IHND/4.49. It was concluded that the ICoW and IAW measurements are the only predictable methods to estimate the initial reference value for CATW. A proposed intraoral approach was hypothesized for estimation of CIW and CIL for the given population. Based on the results of the study, ICoW and IAW measurements can be useful in estimating the initial reference value for CATW, while the proposed novel approach using specific palatal dimensions can be used for estimating the width and length of central incisors. These methods are crucial to obtain esthetic treatment results within the parameters of the given population.

Comparative evaluation of anchorage reinforcement between orthodontic implants and conventional anchorage in orthodontic management of bimaxillary dentoalveolar protrusion.

PubMed

Chopra, S S; Mukherjee, Manish; Mitra, Rajat; Kochar, Gagan Deep; Kadu, Abhijeet

2017-04-01

Increased upper lip procumbency is commonly associated with maxillary dentoalveolar protrusion with the major goal of reducing maxillary dentoalveolar protrusion. The treatment plan usually includes extraction of the maxillary first premolars, followed by retraction of anterior teeth with maximum anchorage. Dental implants have been widely accepted as successful adjuncts for obtaining maximum anchorage in orthodontic treatment. 50 subjects between the ages of 13 and 17 years having bimaxillary dentoalveolar protrusion were included in the study. The patients were divided into two groups. Both groups received treatment with 0.022″ MBT prescription preadjusted edgewise appliance system. In addition, subjects of Group 'I' received the Nance button and lingual arch as anchorage reinforcement in the upper and lower arches, respectively. Subjects of Group 'II' received self-drilling titanium OI for anchorage reinforcement. Significant retraction was achieved in all cases with good vertical control. Anchor loss was observed in both groups. Anchor loss was much higher in Group I compared to Group II, and an intergroup comparison for anchor loss was highly significant. Implants as anchorage, for en masse retraction, can be incorporated into orthodontic practice. The use of orthodontic implants for anchorage is a viable alternative to conventional molar anchorage.

Evaluation of different esthetic smile criteria.

PubMed

Al-Johany, Sulieman S; Alqahtani, Abdulaziz S; Alqahtani, Fahd Y; Alzahrani, Adel H

2011-01-01

The aim of this study was to evaluate the existence of different esthetic smile criteria as determined on the smiles of celebrities, which were considered by lay people to be beautiful. An Internet search for "best smile" and "female celebrities" in the years 2007 and 2008 identified 50 celebrities who were voted to have beautiful smiles. Another search was made for images of these celebrities that showed the entire face with an open smile. The images were analyzed using Digimizer image analysis software for different esthetic smile criteria. Eighty percent of the sample was classified as having an average upper lip position, 62% showed upward upper lip curvature, and 78% had a parallel smile line. Forty-two percent of the images showed the maxillary anterior teeth not touching the lower lip, while 34% were touching, and 24% slightly covered it. Sixty percent displayed up to the second premolar, and 32% displayed up to the first molar when smiling. Midline deviation was detected in 36% of the sample. Diastema and golden proportion were not seen in any of the subjects. Female celebrities voted to have the best smile by lay people showed most of the esthetic smile criteria with slight variations, except for the golden proportion. The opinions and perceptions of lay people about beauty should be studied and evaluated.

EVALUATION OF CLINICAL PERIODONTAL CONDITIONS IN SMOKERS AND NON-SMOKERS

PubMed Central

Luzzi, Lucinara Ignez Tavares; Greghi, Sebastião Luiz Aguiar; Passanezi, Euloir; Sant'ana, Adriana Campos Passanezi; Lauris, José Roberto Pereira; Cestari, Tânia Mary

2007-01-01

Given that tobacco smoking habit is a risk factor for periodontal diseases, the aim of this study was to compare clinical periodontal aspects between smokers and non-smokers. The clinical status were assessed in 55 patients, 29 smokers and 26 non-smokers, aged 30 to 50 years, with mean age of 40. The clinical parameters used were: probing depth (PD), plaque index (PI), gingival index (GI), clinical attachment level (CAL), gingival recession (GR) and gingival bleeding index (GBI) for arches (upper and lower) and teeth (anterior and posterior). Tooth loss was also evaluated in both groups. Multiple regression analysis showed: tendency of greater probing depth and clinical attachment level means for smokers; greater amount of plaque in smokers in all regions; greater gingival index means for non-smokers with clinical significance (p<0.05) in all regions. Although, without statistical significance, the analysis showed greater gingival bleeding index means almost always for non-smokers; similar gingival recession means in both groups and tendency of upper tooth loss in smokers and lower tooth loss in non-smokers. The findings of this study showed that clinical periodontal parameters may be different in smokers when compared to non-smokers and that masking of some periodontal signs can be a result of nicotine's vasoconstrictor effect. PMID:19089190

Altered Passive Eruption Complicating Optimal Orthodontic Bracket Placement: A Case Report and Review of Literature.

PubMed

Pulgaonkar, Rohan; Chitra, Prasad

2015-11-01

An unusual case of altered passive eruption with gingival hyperpigmentation and a Class I malocclusion in a 12-year-old girl having no previous history of medication is presented. The patient reported with spacing in the upper arch, moderate crowding in the lower arch, anterior crossbite and excessive gingival tissue on the labial surfaces of teeth in both the arches. The inadequate crown lengths made placement of the orthodontic brackets difficult. Preadjusted orthodontic brackets have a very precise placement protocol which can affect tooth movement in all 3 planes of space if violated. The periodontal condition was diagnosed as altered passive eruption Type IA. Interdisciplinary treatment protocols including periodontal surgical and orthodontic procedures were used. The periodontal surgical procedures were carried out prior to orthodontic therapy and the results obtained were satisfactory. It is suggested that orthodontists should be aware of conditions like altered passive eruption and modalities of management. In most instances, orthodontic therapy is not hindered.

Maxillary molar distalization with first class appliance

PubMed Central

Ramesh, Namitha; Palukunnu, Biswas; Ravindran, Nidhi; Nair, Preeti P

2014-01-01

Non-extraction treatment has gained popularity for corrections of mild-to-moderate class II malocclusion over the past few decades. The distalization of maxillary molars is of significant value for treatment of cases with minimal arch discrepancy and mild class II molar relation associated with a normal mandibular arch and acceptable profile. This paper describes our experience with a 16-year-old female patient who reported with irregularly placed upper front teeth and unpleasant smile. The patient was diagnosed to have angles class II malocclusion with moderate maxillary anterior crowding, deep bite of 4 mm on a skeletal class II base with an orthognathic maxilla and retrognathic mandible and normal growth pattern. She presented an ideal profile and so molar distalization was planned with the first-class appliance. Molars were distalised by 8 mm on the right and left quadrants and class I molar relation achieved within 4 months. The space gained was utilised effectively to align the arch and establish a class I molar and canine relation. PMID:24577171

The decade of overdentures: 1970-1980.

PubMed

Fenton, A H

1998-01-01

Jaw bones resorb when teeth are lost. People cannot function as well with complete dentures compared with their natural teeth. As more people are living longer and these cumulative effects become increasingly documented, dentists in the 1970s attached more importance to keeping teeth. The concept of overdentures developed as a simple and economic alternative to prolong the retention and function of the last few teeth in a compromised dentition. The previous option was extensive fixed prosthodontics. An overdenture is a complete or removable partial denture that has one or more tooth roots to provide support. Rather than extracting all compromised teeth, the crowns, and pulpal tissue of selected teeth (usually two anterior teeth) are removed. The remaining root projecting through the mucosa is restored and/or contoured. With the crown removed, there is space to cover the area with a denture. The root has less mobility, and its retention retards bone resorption. Overdentures with roots are more stable, and patients can chew better than with dentures supported on residual alveolar bone and mucosal tissue alone. Keeping even a few teeth has a strong psychological value for some patients. Patients who have lost teeth, adjacent tissue, and bone need replacement of more oral structures than tooth crowns alone can provide. A complete denture with flange contours can restore tissue and appearance. The conventional tooth-supported overdenture concept continues to be an accepted treatment modality and has now been adapted to implants.

Single visit nonsurgical endodontic therapy for periapical cysts: A clinical study

PubMed Central

Maity, Ipsita; Meena, N.; Kumari, R. Anitha

2014-01-01

Aims: The aim of this study was to assess the outcome of single sitting root canal treatment (RCT) of asymptomatic teeth with periapical cysts. Materials and Methods: Ten maxillary anterior teeth showing periapical lesion on the radiograph was further screened by ultrasound with color power Doppler (CPD) for confirmation of a cyst. The average dimension of the lesions ranged from 1.3 to 1.9 cm. Single sitting RCT was performed on all the selected teeth. Postoperative healing was monitored at regular interval of 3 months, 6 months, and 1 year by using subjective feedback, radiograph, and ultrasound with CPD study. Results: Eight among the ten cases showed either signs of complete healing or healing in progress by the end of 6-12 months. Conclusions: It was observed that single sitting nonsurgical endodontic management of asymptomatic teeth with periapical cyst confirmed by ultrasound was successful in selected cases. PMID:24963246

Single visit nonsurgical endodontic therapy for periapical cysts: A clinical study.

PubMed

Maity, Ipsita; Meena, N; Kumari, R Anitha

2014-04-01

The aim of this study was to assess the outcome of single sitting root canal treatment (RCT) of asymptomatic teeth with periapical cysts. Ten maxillary anterior teeth showing periapical lesion on the radiograph was further screened by ultrasound with color power Doppler (CPD) for confirmation of a cyst. The average dimension of the lesions ranged from 1.3 to 1.9 cm. Single sitting RCT was performed on all the selected teeth. Postoperative healing was monitored at regular interval of 3 months, 6 months, and 1 year by using subjective feedback, radiograph, and ultrasound with CPD study. Eight among the ten cases showed either signs of complete healing or healing in progress by the end of 6-12 months. It was observed that single sitting nonsurgical endodontic management of asymptomatic teeth with periapical cyst confirmed by ultrasound was successful in selected cases.

Fused primary first mandibular macromolar with a unique relation to its permanent successors: A rare tooth anomaly.

PubMed

Dhindsa, Abhishek; Garg, Shalini; Damle, S G; Opal, Shireen; Singh, Tavleen

2013-04-01

Dental anomalies of number and forms may occur in the primary and permanent dentition. Various terms have been used to describe dental twinning anomalies: Germination, fusion, concrescence, double teeth, conjoined teeth, twinned teeth, geminifusion, and vicinifusion. Fused tooth is a developmental anomaly that is seen more frequently in the primary than the permanent dentition. Double tooth involving deciduous anterior teeth is found mostly in the mandible. Very few cases of nonsyndromic double primary molar have been reported in the literature. The succeeding permanent tooth is often found missing congenitally in the same region. This article reports a very rare unilateral occurrence of an anomalous, primary mandibular first macromolar formed by fusion with a dysmorphic premolar like supernumerary tooth in deciduous dentition period. Instead of agenesis of succedaneous tooth, the double tooth has been succeeded by normally developing mandibular first premolar in the same region.

Comparison of post-obturation pain experience following one-visit and two-visit root canal treatment on teeth with vital pulps: a randomized controlled trial.

PubMed

Wang, C; Xu, P; Ren, L; Dong, G; Ye, L

2010-08-01

To compare the incidence and intensity of post-obturation pain after one- or two-visit root canal treatment (RCT) on anterior teeth with vital pulps and a single root and canal in a randomized controlled trial. One hundred patients requiring RCT on permanent anterior teeth with vital pulps preoperatively were included. The patients were assigned randomly into two groups of 50 patients each. After local anaesthesia, isolation, access and pulp extirpation, the canals of all teeth were prepared using engine-driven rotary ProTaper nickel-titanium instruments in a crown-down technique and irrigated with 2.5% NaOCl. The teeth in group 1 (n = 50) were filled with AH Plus sealer and gutta-percha using a lateral compaction technique at the first visit, whilst those in group 2 (n = 50) were medicated with a calcium hydroxide paste, a sterile dry cotton pellet and Caviton and scheduled for a second visit 7 days later. A modified verbal descriptor scale was used to measure preoperative pain and post-obturation pain at 6, 24, 48 h and 1 week after operation. Chi-square tests and independent-sample T-tests were used to compare the incidence and intensity of post-obturation pain of two groups at each interval. Eleven patients were excluded from the study as they failed to follow the scheduled revisit or their selected teeth had more than one root canal. Data were obtained from the remaining 89 patients. Forty-three patients were undergoing one-visit treatment (group 1) and 46 undergoing two-visit treatment (group 2). Most patients in both groups reported no pain or only slight pain within each post-obturation interval, only one in group 1 and one in group 2 had flare-ups and slight swelling. There was no statistically significant difference in the incidence and intensity of post-obturation pain experienced by two groups. The incidence and intensity of post-obturation pain experience following one- or two-visit RCT on teeth with vital pulps and a single canal were not significantly different.

Enamel thickness variation of deciduous first and second upper molars in modern humans and Neanderthals.

PubMed

Fornai, Cinzia; Benazzi, Stefano; Svoboda, Jiří; Pap, Ildikó; Harvati, Katerina; Weber, Gerhard W

2014-11-01

Enamel thickness and dental tissue proportions have been recognized as effective taxonomic discriminators between Neanderthal and modern humans teeth. However, most of the research on this topic focused on permanent teeth, and little information is available for the deciduous dentition. Moreover, although worn teeth are more frequently found than unworn teeth, published data for worn teeth are scarce and methods for the assessment of their enamel thickness need to be developed. Here, we addressed this issue by studying the 2D average enamel thickness (AET) and 2D relative enamel thickness (RET) of Neanderthal and modern humans unworn to moderately worn upper first deciduous molars (dm(1)s) and upper second deciduous molars (dm(2)s). In particular, we used 3D μCT data to investigate the mesial section for dm(1)s and both mesial and buccal sections for dm(2)s. Our results confirmed previous findings of an Neanderthal derived condition of thin enamel, and thinner enamel in dm(1)s than dm(2)s in both Neanderthal and modern humans. We demonstrated that the Neanderthal 2D RET indices are significantly lower than those of modern humans at similar wear stages in both dm(1)s and dm(2)s (p < 0.05). The discriminant analysis showed that using 2D RET from dm(1) and dm(2) sections at different wear stages up to 93% of the individuals are correctly classified. Moreover, we showed that the dm(2) buccal sections, although non-conventionally used, might have an advantage on mesial sections since they distinguish as well as mesial sections but tend to be less worn. Therefore, the 2D analysis of enamel thickness is suggested as a means for taxonomic discrimination between modern humans and Neanderthal unworn to moderately worn upper deciduous molars. Copyright © 2014 Elsevier Ltd. All rights reserved.

Factors affecting smile esthetics in adults with different types of anterior overjet malocclusion

PubMed Central

Cheng, Pei-Chin

2017-01-01

Objective This study aimed to quantitatively assess the relationship of smile esthetic variables with various types of malocclusion, and identify the cephalometric factors affecting smile measurements. Methods This retrospective study included 106 patients who were treated with retention at the orthodontic department of Taipei Medical University Hospital. Hard-tissue variables were measured using lateral cephalographic tracings, and nine smile esthetic variables were measured using facial photographs. The patients were divided into three groups according to their overjet (< 0, 0–4, and > 4 mm). An analysis of variance was conducted to compare the pretreatment cephalometric variables and smile esthetic variables among the three groups. Multiple linear regression analysis was performed to identify the cephalometric factors affecting the smile measurements in each group. Results Except the upper midline and buccal corridor ratio, all of the smile measurements differed significantly among the three groups before orthodontic treatment. Some of the smile characteristics were correlated with the cephalometric measurements in different types of malocclusion. The overjet was the major factor influencing the smile pattern in all three types of malocclusion. Conclusions Smile characteristics differ between different types of malocclusion; the smile may be influenced by skeletal pattern, dental procumbency, or facial type. These findings indicate that establishment of an optimal horizontal anterior teeth relationship is the key to improving the smile characteristics in different types of malocclusion. PMID:28127537

Use of the ditramax system to communicate esthetic specifications to the laboratory.

PubMed

Margossian, Patrice; Laborde, Gilles; Koubi, Stephen; Couderc, Gullaume; Mariani, Paul

2011-01-01

Prosthetic restoration of the anterior teeth is a major esthetic challenge. Esthetic treatment consists of creating pleasantly proportioned teeth and integrating them harmoniously into the patient's gingiva, lips, and face. The communication of clinical data to the laboratory is critical to the success of any esthetic treatment. The purpose here is to present a straightforward, efficient, and reproducible means of communicating esthetic specifications to ceramists, allowing them to work as though the patient was actually in front of them, with access to all of the major facial esthetic criteria.

Combined Orthodontic-surgical Treatment for Skeletal Class III Malocclusion with Multiple Impacted Permanent and Supernumerary Teeth: Case Report.

PubMed

Xue, Dai Juan And Feng

2014-01-01

In this report we describe a combined orthodontic and surgical treatment for a 14-year-old boy with severe skeletal class III deformity and dental problem. His upper posterior primary teeth in the left side were over-retained and 6 maxillary teeth (bilateral central incisors and canines, left first and second premolars) were impacted, together with 5 supernumerary teeth in both arches. The treatment protocol involved extraction of all the supernumerary and deciduous teeth, surgical exposure and orthodontic traction of the impacted teeth, a bimaxillary orthognathic approach including Lefort I osteotomy. Bilateral sagittal split ramus osteotomy (BSSRO) and genioplasty was performed to correct skeletal problem. After treatment, all of the impacted teeth were brought to proper alignment in the maxillary arch. A satisfied profile and good posterior occlusion was achieved. Treatment mechanics and consideration during different stages are discussed.

Alternative method for predicting optimal insertion depth of the laryngeal tube in children.

PubMed

Kim, J T; Jeon, S Y; Kim, C S; Kim, S D; Kim, H S

2007-11-01

Little information is available about the accuracy of the teeth mark on the laryngeal tube (LT) as a guide to correct placement in children. The aim of this crossover study was to evaluate three methods for optimal insertion depth of the size (#) 2 tube in children weighing 12-25 kg. In 24 children, the LT #2 was consecutively inserted by three different methods: (A) until the thick teeth mark on the tube was aligned with the upper incisors, (B) until resistance was felt, and (C) by inserting to a depth, previously measured, of the curved distance between the cricoid cartilage and the upper incisor. In each case, the depth of insertion, the degree of effective ventilation, the presence of leakage, and the fibreoptic view were assessed. Insertion based on the teeth mark led to a shorter insertion depth and a greater incidence of inadequate ventilation compared with the other two methods. There was no difference in the adequacy of ventilation between methods B and C. The vocal cords were more easily identified with methods B (62.5%) and C (75%) than with method A (12.5%). Insertion of the LT #2 aligned with the teeth mark can result in a shallow insertion depth and inadequate ventilation. The measured distance from the cricoid cartilage to the upper incisor offers alternative guidance for correct LT insertion.

Morphometry, Microstructure, and Wear Pattern of Neornithischian Dinosaur Teeth From the Upper Cretaceous Iharkút Locality (Hungary).

PubMed

Virág, Attila; Ősi, Attila

2017-08-01

Teeth of iguanodontian ornithopods and ceratopsians could be remarkably similar, thus the referral of isolated dental material to particular neornithischian clades can be highly problematic. These groups are represented by the rhabdodontid Mochlodon vorosi and the basal coronosaurian Ajkaceratops kozmai in the Upper Cretaceous Csehbánya Formation at Iharkút (western Hungary). Whereas teeth of Mochlodon are common elements at the locality, no dental material belonging to Ajkaceratops was identified until now. Here we used mathematical statistical approaches, as well as tooth wear and dental microstructure analysis in order to decide whether the teeth previously referred to Mochlodon can be treated as a homogenous sample, or some remains belong rather to Ajkaceratops. According to our results, there was a striking morphological and structural convergence between the teeth of both taxa. However, the wear study revealed the existence of two different patterns within the sample. One is characterized by straight and parallel microstriations that suggest orthal movements during the jaw closure. This pattern was associated with Mochlodon. The other pattern appeared only on a few teeth, and it can be differentiated by its distinctive curved microstriations that indicate circumpalinal chewing. Because curved striations have never been described in ornithopods, but are found in several neoceratopsians, this pattern was associated here with Ajkaceratops. Here we present the first teeth that can provisionally be referred to the latter genus. We believe that the methodology discussed in this article will facilitate distinguishing ceratopsian and ornithopod teeth in other localities as well. Anat Rec, 300:1439-1463, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Open bite as a risk factor for orthodontic root resorption.

PubMed

Motokawa, Masahide; Terao, Akiko; Kaku, Masato; Kawata, Toshitsugu; Gonzales, Carmen; Darendeliler, M Ali; Tanne, Kazuo

2013-12-01

The purpose of the present study was to clarify the prevalence and degree of root resorption induced by orthodontic treatment in patients with and without open bite. One hundred and eleven patients treated with multibracket appliances were retrospectively selected from the patients and divided into non-open bite (NOB) and open bite (OB) groups. The severity of root resorption and the root shape were classified into five groups on periapical radiographs before and after treatment. Moreover, only in the OB group, all teeth were sub-divided into functional and hypofunctional ones that are occluding and non-occluding. As the results of multiple linear regression analysis of patient characteristics and clinical variables with the number of overall root resorption, the independent variables that were found to contribute significantly to root resorption were bite and abnormal root shape. The prevalences of root resorption evaluated in the number of patients were significantly higher in OB group than in NOB group, and those in the number of teeth were significantly higher in OB group than in NOB group, in particular anterior and premolar teeth. The prevalence of resorbed teeth with abnormal root shapes was also significantly higher in OB group than in NOB group. On the other hand, in OB group, the prevalences of root resorption and teeth with abnormal root shape were significantly greater in hypofunctional teeth than in normal functional teeth. There are more teeth with root resorption and abnormal root shape in open bite cases than in normal bite cases, and more teeth with abnormal root shapes and root resorption in hypofunctional teeth than in functional teeth.

Interdisciplinary treatment for an adult patient with anterior open bite, severe periodontitis, and intellectual disability.

PubMed

Kang, Da-Young; Choi, Sung-Hwan; Jung, Young-Soo; Hwang, Chung-Ju

2015-05-01

This case report describes the beneficial effects of the interdisciplinary treatment of an adult patient with severe skeletal periodontal problems. A 30-year-old female patient presented with anterior open bite, gummy smile, and facial asymmetry. The patient had chronic generalized severe periodontitis with pathologic maxillary anterior teeth migration and mild intellectual disability. Treatment included 6 months of periodontal treatment, followed by presurgical orthodontic treatment, a Le Fort I osteotomy with anterior segmental osteotomy, a bilateral sagittal split ramus osteotomy, and postsurgical orthodontic treatment. After treatment completion, the patient exhibited functional and aesthetic improvements. Her periodontal condition improved and was maintained after the treatment. Here, we demonstrate a successful treatment outcome in a complicated case following a systematic interdisciplinary approach performed with the correct diagnosis and treatment planning.

Dental compensation for moderate Class III with vertical growth pattern by extraction of the lower second molars.

PubMed

Jacobs, Collin; Jacobs-Müller, Claudia; Hoffmann, Viviana; Meila, Dan; Erbe, Christina; Krieger, Elena; Wehrbein, Heiner

2012-01-01

Analysis of the effects and side effects of treatment of patients with moderate skeletal Class III and vertical growth pattern by means of extraction of the second molars in the lower jaw. A total of 20 patients with a mean age of 12.9 years were examined retrospectively. Inclusion criteria consisted of a Wits value of 0 to -5, a posterior growth pattern of the mandible (Hasund analysis), an overjet of -2 to 1 mm, and an overbite of 0 to -3 mm. Treatment was performed using a straight-wire appliance. As part of the treatment, the lower second molars were extracted and Class III elastics attached. Cephalograms and orthopantomograms taken before and after treatment were used for evaluation. Treatment resulted in a significant change in the mean overjet from 0.5 mm to 2.1 mm and the attainment of a positive mean overbite of -1.0 mm to 0.9 mm. The occlusal plane rotated anteriorly from 18.8° to 13.7°. The skeletal parameters showed a change in the Wits value from -3.3 mm to -1.4 mm and an anterior mandibular rotation (ML-NSL 35.5° vs. 32.0°). The soft tissues revealed an increase in the distance between the lower lip and the "esthetic line" to the posterior (-2.0 mm vs. -3.9 mm). Dental compensation of moderate skeletal Class III with a tendency to an anterior open bite with vertical growth pattern by extracting the lower second molars, combined with Class III elastics, resulted in an anterior rotation of the occlusal plane and mandible. Eighteen of 20 patients achieved a physiological overjet and positive overbite. A prerequisite for this therapy is the presence of lower wisdom teeth; a potential side effect is elongation of the upper second molars.

Non-syndrome multiple supernumerary teeth in Nigerians.

PubMed

Umweni, A A; Osunbor, G E N

2002-09-01

The present study was carried out to ascertain frequency of multiple supernumerary teeth not associated with syndrome in Nigerians. A total of 13 patients comprising of 10 males (76.92%) and 3 female (23.07%) representing 0.098% of the study population had multiple supernumerary teeth. Multiple supernumerary teeth without any associated systemic diseases or syndrome are rare as reported by BLUMENTHAL (3) RUHLMAN and NEELY (17), KANTOR et al. (10) is not the case in this study. The maxillary region has the highest frequency of occurrence with 12 times (66.67%) followed by the mandibular premolar region with 4 times (22.22%) while maxillary premolar and mandibular anterior region shared (5.55%) respectively. The conical and tuberculate types of supernumerary teeth were found in the midline region, while the supplemental supernumerary teeth were more in the mandibular premolar region with 12 (70.58%) follow by maxillary midline 4 (23.52%) and the lower incisor region 1 (5.88%) which is in consonant with WINTER and BROOK (2), STAFNE (19) NAZIF, FUTALO ZULLO (15). The role of genetics in the aetiology of multiple supernumerary teeth as found in this study, the occurrence of supernumerary teeth on two brothers and a daughter to one of the affected brothers, tends, to suggest an autosomal dominant mode of inheritance and the challenges to management by the orthodontists are discussed.

Risk factors for failure of glass fiber-reinforced composite post restorations: a prospective observational clinical study.

PubMed

Naumann, Michael; Blankenstein, Felix; Kiessling, Saskia; Dietrich, Thomas

2005-12-01

Glass fiber-reinforced endodontic posts are considered to have favorable mechanical properties for the reconstruction of endodontically treated teeth. The aim of the present investigation was to evaluate the survival of two tapered and one parallel-sided glass fiber-reinforced endodontic post systems in teeth with different stages of hard tissue loss and to identify risk factors for restoration failure. One-hundred and forty-nine glass fiber-reinforced endodontic posts in 122 patients were followed-up for 5-56 months [mean +/- standard deviation (SD): 39 +/- 11 months]. Glass fiber-reinforced endodontic posts were adhesively luted and the core was built with a composite resin. Cox proportional hazards models were used to evaluate the association of clinical variables and failure rate. Higher failure rates were found for restorations of anterior teeth compared with posterior teeth [Hazard-Ratios (HR): 3.1; 95% confidence interval (CI): 1.3-7.4], for restorations in teeth with no proximal contacts compared with at least one proximal contact (HR: 3.0; 95% CI: 1.0-9.0), and for teeth restored with single crowns compared with fixed bridges (HR: 4.3; 95% CI: 1.1-16.2). Tooth type, type of final restoration and the presence of adjacent teeth were found to be significant predictors of failure rates in endodontically treated teeth restored with glass fiber-reinforced endodontic posts.

Clinical case report of long-term follow-up in type-2 diabetes patient with severe chronic periodontitis and nifedipine-induced gingival overgrowth.

PubMed

Shibukawa, Yoshihiro; Fujinami, Koushu; Yamashita, Shuichiro

2012-01-01

In this case report, we describe the clinical course over a 14-year follow-up in a 47-year-old diabetes patient with severe chronic periodontitis and nifedipine-induced gingival overgrowth. The patient had a history of hypertension for over 5 years and uncontrolled type 2 diabetes. Overgrown gingiva was observed in most of the teeth and was marked in the upper and lower anterior teeth. A probing pocket depth of ≥ 4 mm and bleeding on probing (BOP) were observed in 94 and 90% of sites examined, respectively. At baseline, his hemoglobin A1c (HbA1c) was 8.5%. The patient received periodontal and diabetic treatment simultaneously. Medication was changed from nifedipine chloride to an angiotensin-converting enzyme inhibitor. After initial therapy and subsequent periodontal surgery, gingival overgrowth disappeared and probing depth and BOP showed a significant improvement. No recurrence was observed during supportive periodontal therapy (SPT). The HbA1c level improved from 8.5 to 6.3% after periodontal treatment, subsequently remaining at a good level during SPT over 10 years. This study demonstrated that periodontal treatment, withdrawal of medication and control of diabetes can result in remarkable improvements in type 2 diabetes patients with chronic periodontitis and nifedipine-induced gingival overgrowth. These results suggest that comprehensive periodontal treatment in combination with treatment for diabetes mellitus can exert a positive influence on blood glucose levels and periodontal condition in diabetic patients.

Radiographic Assessment of Bone Formation Using rhBMP2 at Maxillary Periapical Surgical Defects: A Case Series

PubMed Central

Kumar, M. Hari; Vishalakshi, K.; Sabitha, H.

2016-01-01

Periapical cysts are the most common inflammatory odontogenic cysts arising from untreated dental caries with pulp necrosis and periapical infection. The choice of treatment is often influenced by various factors like size, extension of the lesion, proximity to vital structures, systemic condition and compliance of the patient too. The treatment protocol for management of periapical cysts is still under discussion and options vary from conservative treatment by means of endodontic technique to surgical treatment like decompression or a marsupialisation or even to enucleation. Large bony defect secondary to periapical surgery compromising the tooth integrity often requires bone graft to enhance bone formation and thus restoring function at the earliest. The present case series included 10 patients who had established periapical pathology secondary to history of trauma on upper anterior teeth as well patients with history of carious teeth with an apparent failure in root canal therapy. All ten patients were treated with cyst enucleation and apiceotomy along with 1.4cc Recombinant Human Bone Morphogenetic Protein-2 soaked Absorbable Collagen Sponge implantation at surgical defect. Radiographs and clinical examinations were done upto 3 months to evaluate healing. Radiographic and clinical assessments revealed bone regeneration and restoration of the maxillary surgical defects in all 10 patients. No evidence of graft failure was noted. The Recombinant Human Bone Morphogenetic Protein-2 soaked Absorbable Collagen Sponge carrier is thus proved to be a viable option for the treatment of maxillary periapical surgical defects. PMID:27190972

Radiographic Assessment of Bone Formation Using rhBMP2 at Maxillary Periapical Surgical Defects: A Case Series.

PubMed

Kumar, M Siva; Kumar, M Hari; Vishalakshi, K; Sabitha, H

2016-04-01

Periapical cysts are the most common inflammatory odontogenic cysts arising from untreated dental caries with pulp necrosis and periapical infection. The choice of treatment is often influenced by various factors like size, extension of the lesion, proximity to vital structures, systemic condition and compliance of the patient too. The treatment protocol for management of periapical cysts is still under discussion and options vary from conservative treatment by means of endodontic technique to surgical treatment like decompression or a marsupialisation or even to enucleation. Large bony defect secondary to periapical surgery compromising the tooth integrity often requires bone graft to enhance bone formation and thus restoring function at the earliest. The present case series included 10 patients who had established periapical pathology secondary to history of trauma on upper anterior teeth as well patients with history of carious teeth with an apparent failure in root canal therapy. All ten patients were treated with cyst enucleation and apiceotomy along with 1.4cc Recombinant Human Bone Morphogenetic Protein-2 soaked Absorbable Collagen Sponge implantation at surgical defect. Radiographs and clinical examinations were done upto 3 months to evaluate healing. Radiographic and clinical assessments revealed bone regeneration and restoration of the maxillary surgical defects in all 10 patients. No evidence of graft failure was noted. The Recombinant Human Bone Morphogenetic Protein-2 soaked Absorbable Collagen Sponge carrier is thus proved to be a viable option for the treatment of maxillary periapical surgical defects.

The heterodonty in euselachian sharks from the Pennsylvanian of Nebraska

NASA Astrophysics Data System (ADS)

Ginter, Michał

2016-09-01

Among the rich material of chondrichthyan microremains from the Indian Cave Sandstone (Upper Pennsylvanian, Gzhelian) near Peru, Nebraska, USA, housed at the Carnegie Museum of Natural History, there occur almost sixty teeth representing Euselachii. They belong to at least seven species, presenting various types of heterodonty. Two new species are described, viz. Ossianodus nebraskensis gen. et sp. nov., whose dentition is similar to that of certain Mesozoic hybodonts, and Sphenacanthus tenuis sp. nov. with minute teeth of protacrodont design. Most of the euselachian teeth served to crush or grind prey, and some had the potential to clutch, but cutting teeth are absent from the fauna.

Plate-like permanent dental laminae of upper jaw dentition in adult gobiid fish, Sicyopterus japonicus.

PubMed

Moriyama, Keita; Watanabe, Shun; Iida, Midori; Sahara, Noriyuki

2010-04-01

Sicyopterus japonicus (Teleostei, Gobiidae) possesses a unique upper jaw dentition different from that known for any other teleosts. In the adults, many (up to 30) replacement teeth, from initiation to attachment, are arranged orderly in a semicircular-like strand within a capsule of connective tissue on the labial side of each premaxillary bone. We have applied histological, ultrastructural, and three-dimensional imaging from serial sections to obtain insights into the distribution and morphological features of the dental lamina in the upper jaw dentition of adult S. japonicus. The adult fish has numerous permanent dental laminae, each of which is an infolding of the oral epithelium at the labial side of the functional tooth and forms a thin plate-like structure with a wavy contour. All replacement teeth of a semicircular-like strand are connected to the plate-like dental lamina by the outer dental epithelium and form a tooth family; neighboring tooth families are completely separated from each other. The new tooth germ directly buds off from the ventro-labial margin of the dental lamina, whereas no distinct free end of the dental lamina is present, even adjacent to this region. Cell proliferation concentrated at the ventro-labial margin of the dental lamina suggests that this region is the site for repeated tooth initiation. During tooth development, the replacement tooth migrates along a semicircular-like strand and eventually erupts through the dental lamina into the oral epithelium at the labial side of the functional tooth. This unique thin plate-like permanent dental lamina and the semicircular-like strand of replacement teeth in the upper jaw dentition of adult S. japonicus probably evolved as a dental adaptation related to the rapid replacement of teeth dictated by the specialized feeding habit of this algae-scraping fish.

Color stability of different denture teeth materials: an in vitro study.

PubMed

Mutlu-Sagesen, L; Ergün, G; Ozkan, Y; Bek, B

2001-09-01

The aim of this in vitro study was to compare the color stability of commercially available porcelain, reinforced acrylic, and conventional acrylic denture teeth materials used in removable prostheses. Two brands of porcelain (Unilux-Enta Lactona-Holland and Vivoperl-Ivoclar-Liechtenstein), 2 brands of reinforced acrylic (Optodent-Bayer-Germany and Ivolek-Ivoclar-Liechtenstein), and 2 brands of conventional acrylic (Isodent-Güney Diş Deposu-Turkey and Samed-Turkey), were made, for a total of 6 different denture teeth groups. Denture teeth were subjected to 3 staining solutions (filtered coffee, tea, and cola) and distilled water. From each group of denture teeth, 4 sets of maxillary anterior denture teeth were immersed in each of the 4 solutions. The color values of denture teeth were measured colorimetrically with the Gardner XL 20 Tristimulus Colorimeter (Gardner Lab. Inc., Bethesda, Maryland, USA). Color changes were characterized in the CIEL*a*b* color space. Color change values were determined after 1 day, 1 week, 2 weeks, and 4 weeks. The color difference values were calculated and then evaluated by two-way ANOVA statistically. The filtered coffee solution was found to be more chromogenic than the other 2 staining solutions, while porcelain denture teeth materials were more color stable. Assuming the color change of deltaE* < 1.0 as a discernible limit and deltaE* = 3.3 as an acceptable value, the filtered coffee, tea, and cola had slight staining effects on all 6 groups of denture teeth.

Dental wear quantity and direction in Chalcolithic and Medieval populations from southwest France.

PubMed

Grimoud, Anne-Marie; Gibbon, Victoria E

2017-01-01

The aim of this study was to verify if dental wear changed due to the dietary shift between the Chalcolithic and Middle Ages from relatively hard and fibrous foods to soft cooked cereals. This was accomplished by comparing dental wear quantity and direction between people from two archaeological sites, Les Treilles during the Chalcolithic (mixed subsistence farmers) and Marsan from the Middle Ages (agriculturalists) in southwest France. The materials studied include 65 mandibles, 32 from Les Treilles and 33 from Marsan; 549 teeth were studied. The results show statistically significant difference in wear quantity and direction, the Chalcolithic population (Les Treilles) had the greatest levels of wear in a mainly oblique direction, with the anterior teeth heavily affected by wear. Comparatively, the Medieval sample (Marsan) had lesser levels of wear in a mainly horizontal direction, and the most heavily worn teeth were the molars and incisors. The quantity of wear seems to correlate well with changes in diet, the high level of wear on the anterior teeth in the Chalcolithic sample corresponds with the consumption of a mixed diet of fibrous and tough foods. At Marsan, the lower wear quantity was likely due to a diet of soft boiled cereals, requiring less mastication. However, wear direction appears dependent on several factors and may correlate with more mixed subsistence practices. This study demonstrates the need for additional research into the complex actions of mastication and its effect on dental wear, as well as standardised methodology for the examination of dental wear in archaeological samples. Copyright © 2016 Elsevier GmbH. All rights reserved.

Long-term survival of endodontically treated, maxillary anterior teeth restored with either tapered or parallel-sided glass-fiber posts and full-ceramic crown coverage.

PubMed

Signore, Antonio; Benedicenti, Stefano; Kaitsas, Vassilios; Barone, Michele; Angiero, Francesca; Ravera, Giambattista

2009-02-01

This retrospective study investigated the clinical effectiveness over up to 8 years of parallel-sided and of tapered glass-fiber posts, in combination with either hybrid composite or dual-cure composite resin core material, in endodontically treated, maxillary anterior teeth covered with full-ceramic crowns. The study population comprised 192 patients and 526 endodontically treated teeth, with various degrees of hard-tissue loss, restored by the post-and-core technique. Four groups were defined based on post shape and core build-up materials, and within each group post-and-core restorations were assigned randomly with respect to root morphology. Inclusion criteria were symptom-free endodontic therapy, root-canal treatment with a minimum apical seal of 4mm, application of rubber dam, need for post-and-core complex because of coronal tooth loss, and tooth with at least one residual coronal wall. Survival rate of the post-and-core restorations was determined using Kaplan-Meier statistical analysis. The restorations were examined clinically and radiologically; mean observation period was 5.3 years. The overall survival rate of glass-fiber post-and-core restorations was 98.5%. The survival rate for parallel-sided posts was 98.6% and for tapered posts was 96.8%. Survival rates for core build-up materials were 100% for dual-cure composite and 96.8% for hybrid light-cure composite. For both glass-fiber post designs and for both core build-up materials, clinical performance was satisfactory. Survival was higher for teeth retaining four and three coronal walls.

Psychosocial implications of malocclusion among 12-18 year old secondary school children in Ibadan, Nigeria.

PubMed

Onyeaso, C O; Sanu, O O

2005-03-01

The main purpose of this study was to analyze the current psychosocial implications of malocclusion in Ibadan, Nigeria. The study sample comprised 614 secondary school children (327 males and 287 females) aged 12-18 years (mean age, 14.9 +/- 2.9 SD) who filled in a questionnaire containing general questions about body image and specific inquires concerning self-perception and social implications of dental appearance. The children's occlusions were also assessed using the Dental Aesthetic Index (DAI) and the malocclusion traits related to body image, self-perception, and social implications of dental appearance. Subjects with malocclusion rated only the teeth significantly least satisfactory among other twelve items of body image. The lowest rating was observed in subjects with crowding of the maxillary and mandibular incisor segments. Highly significant differences (P < 0.001) were found between subjects with normal or minor malocclusion and those with marked malocclusion in indicating awareness of malocclusion, dissatisfaction with the appearance of the teeth, and unfavourable appearance of the teeth compared with those of peers. Schoolmates' teasing occurred significantly more often in the presence of malocclusion (P < 0.001). Unfavourable perceptions of the teeth were expressed significantly more often by subjects with anterior maxillary irregularities of up to 1 mm and more, spacing of both maxillary and mandibular incisor segments, midline diastema, crowding (especially of the mandibular incisor segment), anterior open bite and molar relation deviations. It was concluded that certain malocclusions, especially occlusal and space anomalies, may adversely affect body image and self-concept of Nigerian adolescents.

Riga-Fede disease and neonatal teeth.

PubMed

Costacurta, M; Maturo, P; Docimo, R

2012-01-01

The aim of this study is to present a case of Riga-Fede disease (RFD). RFD is a benign and uncommon mucosal disorder, characterized by an ulceration of the tongue, often caused by repetitive traumatic injuries due to backward and forward movements of the tongue over the mandibular anterior incisors. RFD is most commonly associated with the eruption of primary lower incisor in older infants or natal-neonatal teeth in newborns. A 2-month-old female infant was referred to our Paediatric Dentistry Unit for ulceration (13 mm diameter) on the ventral surface of the tongue and neonatal teeth. The extraction of neonatal teeth was selected as treatment of choice, over more conservative treatments, for the rapid resolution of the lesion and for the limited risk of inadequate nutrients intake. The extracted teeth underwent a macroscopic/microscopic examination. The complete healing of the lesion took 4 weeks; subsequently, the infant, revised at the 1-year follow-up visit. Early detection of RFD is recommended because such lesions properly may induce deformity or mutilation of tongue, dehydration, inadequate nutrients intake by the infant and growth retardation.

Taste deficits related to dental deafferentation: an electrogustometric study in humans.

PubMed

Boucher, Yves; Berteretche, Marie-Violaine; Farhang, Farnaz; Arvy, Marie-Pierre; Azérad, Jean; Faurion, Annick

2006-12-01

Dental treatments, the prevalence of which increases with age, can cause orofacial somatosensory deficits. In order to examine whether they may also affect taste sensitivity, electrogustometric thresholds were measured at 9 loci on the tongue surface in 391 healthy non-smoking, non-medicated subjects. Results showed that the greater the number of deafferented teeth, the higher the thresholds. Irrespective of age, subjects with more than 7 deafferented teeth exhibited significantly higher thresholds than subjects with fewer than 7 deafferented teeth. Conversely, across age groups, no statistical difference was observed among subjects with no, or few, deafferented teeth. Hence, a taste deficit, which was not correlated to aging, was observed. An association was noticed between the location of taste deficits and the location of deafferented teeth. Higher thresholds at anterior sites, with no possible traumatic injury relationship, suggested that neurophysiological convergence between dental somatosensory and taste pathways - possibly in the nucleus tractus solitarius - could be responsible for these relative decreases of taste sensitivity when dental afferences were lacking. Among trigeminal contributions, lingual nerve and inferior alveolar nerve may synergize taste.

An electromyographic study to assess the minimal time duration for using the splint to raise the vertical dimension in patients with generalized attrition of teeth.

PubMed

Nanda, Aditi; Jain, Veena; Srivastava, Achal

2011-01-01

To investigate the effect of restoration of lost vertical by centric stabilizing splint on electromyographic (EMG) activity of masseter and anterior temporalis muscles bilaterally in patients with generalized attrition of teeth. EMG activity of anterior temporalis and masseter muscle was recorded bilaterally for 10 patients whose vertical was restored with centric stabilizing splint. The recording was done at postural rest position and in maximum voluntary clenching for each subject before the start of treatment, immediately after placement of splint and at subsequent recall visits, with splint and without the splint. The EMG activity at postural rest position (PRP) and maximum voluntary clench (MVC) decreased till 1 month for both the muscles. In the third month, an increase in muscle activity toward normalization was noted at PRP, both with and without splint. At MVC in the third month, the muscle activity without splint decreased significantly as compared to pretreatment values for anterior temporalis and masseter, while with the splint an increase was seen beyond the pretreatment values. A definite response of anterior temporalis and masseter muscle was observed over a period of 3 months. This is suggestive that the reversible increase in vertical prior to irreversible intervention must be carried out for a minimum of 3 months to achieve neuromuscular deprogramming. This allows the muscle to get adapted to the new postural position and attain stability in occlusion following splint therapy.

Evaluation of effects of anterior palatoplasty operation on upper airway parameters in computed tomography in patients with pure snoring and obstructive sleep apnea syndrome.

PubMed

Selcuk, Adin; Ozer, Tulay; Esen, Erkan; Ozdogan, Fatih; Ozel, Halil Erdem; Yuce, Turgut; Caliskan, Sebla; Dasli, Sinem; Bilal, Nagihan; Genc, Gulden; Genc, Selahattin

2017-05-01

To investigate changes in upper airway volume parameters measured by computerized tomography scans in patients with surgically treated by anterior palatoplasty of whom having pure snoring and mild-moderate obstructive sleep apnea. A prospective study on consecutively anterior palatoplasty performed pure snoring and obstructive sleep apnea patients. Computerized tomography scans were obtained preoperatively and following anterior palatoplasty procedure to measure changes in upper airway volume. Patients underwent diagnostic drug induced sleep endoscopy to assess the site of obstruction. Preoperative and postoperative measurements were compared using student's t test and Chi-square test. Twenty-two patients (16 men and 6 women, age 48.22 ± 9.23, body mass index 25.85 ± 2.57) completed the trial. Anterior palatoplasty was associated with an increase in total upper airway volume from 4.81 ± 1.73 cm 3 before treatment to 6.57 ± 2.03 cm 3 after treatment (p < 0.005). Change in soft palate thickness did not vary significantly (p < 0.039). The mean soft palate length has changed from 4.13 ± 0.41 to 3.93 ± 0.51 cm (p < 0.001). The preoperative and postoperative measurements of cross-sectional areas and volumes all showed significant difference except velopharynx minimal lateral airway dimension. The operational procedure increased the total upper airway volume much more in men than in women (p < 0.05). Results of this study indicate that anterior palatoplasty operation appears to produce significant increase in upper airway volume and cross sectional area. It does not seem to have an effect on lateral airway dimension. Computerized tomography is a quick and noninvasive imaging technique that allows for quantitative assessment of the velopharyngeal patency changes.

Root canal revascularization. The beginning of a new era in endodontics.

PubMed

Alrahabi, Mothanna K; Ali, Mahmoud M

2014-05-01

Endodontic management of immature anterior teeth with necrotic pulps is a great challenge. Although there are different treatment procedures to deal with this problem such as apexification by using calcium hydroxide dressings or applying a barrier of mineral trioxide aggregate and gutta-percha obturation, the outcomes are still unsatisfactory and the root might still be weak. Recently, a new treatment protocol by revascularization of immature non-vital, infected teeth was introduced to regenerate dental structure and complete the root maturation. However, larger case series with longer follow-up periods are required to accept revascularization as the standard protocol for management of immature non-vital, infected teeth. In this review, we discuss the concept of root canal revascularization, revascularization mechanisms, and the structure of the regenerated tissues.

Employing Tip-Edge brackets on canines to simplify straight-wire mechanics.

PubMed

Rocke, R T

1994-10-01

The straight-wire appliance was developed in part to reduce wire bending and therefore make treatment results more predictable. Because tip prescription is built into the bracket slots, teeth are held at their final crown angulations throughout treatment. Straight-wire brackets are used in an attempt to produce bodily tooth movement. However, teeth tend to tip when a force is applied. This tipping, especially when canines are retracted, can deflect the arch wire causing supereruption of the incisors with a resultant increase in anterior overbite and an open bite in the canine/premolar area. Placing Tip-Edge brackets (TP Orthodontics, Inc., LaPorte, Ind.) on canines and employing tipping and uprighting mechanics on these teeth can overcome these problems. Two cases are presented to illustrate this approach to treatment.

Displacement of teeth without and with bonded fixed orthodontic retainers: 3D analysis using triangular target frames and optoelectronic motion tracking device.

PubMed

Chakroun, Firas; Colombo, Vera; Lie Sam Foek, Dave; Gallo, Luigi Maria; Feilzer, Albert; Özcan, Mutlu

2018-06-06

The objective of this study was to evaluate the anterior tooth movement without and with bonded fixed orthodontic retainers under incremental loading conditions. Six extracted mandibular anterior human teeth were embedded in acrylic resin in True Form I Arch type and 3D reconstruction of Digital Volume Tomography (DVT) images (0.4 mm 3 voxels) were obtained. The anatomy of each tooth was segmented and digitally reconstructed using 3D visualization software for medical images (AMIRA, FEI SVG). The digital models of the teeth were repositioned to form an arch with constant curvature using a CAD software (Rhinoceros) and a base holder was designed fitting the shape of the roots. The clearance between the roots and their slot in the holder was kept constant at 0.3 mm to replicate the periodontal ligament thickness. The holder and the teeth were then manufactured by 3D printing (Objet Eden 260VS, Stratasys) using a resin material for dental applications (E = 2-3 GPa). The 3D-printed teeth models were then positioned in the holder and the root compartments were filled with silicone. The procedure was repeated to obtain three identical arch models. Each model was tested for tooth mobility by applying force increasing from 5 to 30 N with 5 N increments applied perpendicular on the lingual tooth surface on the incisal one third (crosshead speed: 0.1 mm/s). The teeth on each model were first tested without retainer (control) and subsequently with the bonded retainers (braided bonded retainer wire; Multi-strand 1 × 3 high performance wire, 0.022″ × 0.016″). Tooth displacement was measured in terms of complicance (F/Δ movement) (N/mm) using custom-built optoelectronic motion tracking device (OPTIS) (accuracy: 5 µm; sampling rate: 200 Hz). The position of the object was detected through three LEDs positioned in a fixed triangular shape on a metal support (Triangular Target Frame). The measurements were repeated for three times for each tooth. Data were analyzed using mixed model with nesting (alpha = 0.05). The use of retainer showed a significant effect on tooth mobility (0.008 ± 0.004) compared to non-bonded teeth (control) (0.014 ± 0.009) (p < 0.0001). The amount of displacement on the tooth basis was also significantly different (p = 0.0381) being the most for tooth no. 42 (without: 0.024 ± 0.01; with: 0.012 ± 0.002) (p = 0.0018). No significant difference was observed between repeated measurements (p = 0.097) and the incremental magnitude of loading (5-30 N: 0.07 ± 0.01-0.09 ± 0.02) (p > 0.05). Mandibular anterior teeth showed less tooth mobility when bonded with stainless steel wire as opposed to non-bonded teeth but the tooth mobility varied depending on the tooth type. Intermittent increase in loading from 5 to 30 N did not increase tooth displacement. Copyright © 2018 Elsevier Ltd. All rights reserved.

Reducing Baby Bottle Tooth Decay. A SERVE Research Brief.

ERIC Educational Resources Information Center

Southeastern Regional Vision for Education (SERVE), Tallahassee, FL.

This pamphlet discusses strategies for reducing baby bottle tooth decay (BBTD) among Native American children. BBTD in infants and toddlers is a painful disease characterized by extensive decay of the upper front and side teeth. It is caused by prolonged exposure of teeth to carbohydrates, such as those contained in infant formula, milk, and fruit…

Cone-beam computed tomography-based diagnosis and treatment simulation for a patient with a protrusive profile and a gummy smile

PubMed Central

Imamura, Toshihiro; Kokai, Satoshi; Ono, Takashi

2018-01-01

For patients with bimaxillary protrusion, significant retraction and intrusion of the anterior teeth are sometimes essential to improve the facial profile. However, severe root resorption of the maxillary incisors occasionally occurs after treatment because of various factors. For instance, it has been reported that approximation or invasion of the incisive canal by the anterior tooth roots during retraction may cause apical root damage. Thus, determination of the position of the maxillary incisors is key for orthodontic diagnosis and treatment planning in such cases. Cone-beam computed tomography (CBCT) may be useful for simulating the post-treatment position of the maxillary incisors and surrounding structures in order to ensure safe teeth movement. Here, we present a case of Class II malocclusion with bimaxillary protrusion, wherein apical root damage due to treatment was minimized by pretreatment evaluation of the anatomical structures and simulation of the maxillary central incisor movement using CBCT. Considerable retraction and intrusion of the maxillary incisors, which resulted in a significant improvement in the facial profile and smile, were achieved without severe root resorption. Our findings suggest that CBCT-based diagnosis and treatment simulation may facilitate safe and dynamic orthodontic tooth movement, particularly in patients requiring maximum anterior tooth retraction. PMID:29732305

Anterior maxillary and mandibular biotype: relationship between gingival thickness and width with respect to underlying bone thickness.

PubMed

La Rocca, Andres Pascual; Alemany, Antonio Santos; Levi, Paul; Juan, Monica Vicario; Molina, Jose Nart; Weisgold, Arnold S

2012-12-01

: Periodontal biotype is considered to be a significant factor related to successful dental treatments. The purpose of this study was to determine the relationship between gingival thickness (GT) and width with respect to the underlying bone thickness in the maxillary and mandibular anterior sextant. : Overall, 180 anterior teeth within healthy patients were assessed. GT and buccal bone thickness (BT) were measured at 3 locations: crestal/gingival margin, tooth apex, and a midpoint between the 2. In addition, the apicoincisal gingival width (GW) was recorded. Clinical and cone beam CT measurements were compared and correlated. : No statistically significant relations were observed between GT and BT measures at any of the 3 positions. The mean GT at crestal mid and apical position for the maxillary teeth was 1.01 (±0.58) mm, 1.06 (±0.48) mm, and 0.83 (±0.47) mm, respectively, and the corresponding mean BT was 1.24 (±0.90) mm, 0.81 (±0.33) mm, and 2.78 (±1.62) mm, respectively. The GW is directly related (R = 0.007; P < 0.05) to the crestal BT. : In this study, the GT is not linked to the BT. However, the GW seems to be associated with the crestal BT.

Dental caries among disadvantaged 3- to 4-year-old children in northern Manhattan.

PubMed

Albert, David A; Park, Katherine; Findley, Sally; Mitchell, Dennis A; McManus, Joseph M

2002-01-01

The study was conducted to determine the prevalence of early childhood caries (ECC), untreated caries, and the ratio of posterior to anterior caries in a disadvantaged predominantly Hispanic or African-American urban population. Data are compared to NHANES III to assess the caries burden in our cohort. Comparisons are made to the aggregate and to minorities within the national database. A retrospective chart review was conducted for children enrolled in a Head Start or day care program in the communities of Washington-Heights and Central and East Harlem and seen on the community organization's mobile dental van between 1995 and 1997. The study included only children 3 to 4 years of age at the initial examination (n=1,605). A single examiner provided all the examinations. The mean number of decayed and filled surfaces (dfs), decayed surfaces (ds) and filled surfaces (fs), the percentage of decayed of total decayed and filled surfaces (%d/dfs), decayed and filled teeth (dft), decayed teeth (dt) and filled teeth (ft), and the percentage of decayed of total decayed and filled teeth (%d/dft) were calculated. Posterior vs anterior d, f, dft, dfs and d-anterior/total d, and d-posterior/total d were tabulated. Northern Manhattan data was tabulated and compared to NHANES III (1988-1994) in the aggregate and for subpopulations categorized by gender and ethnicity. All results are also reported for children with at least one decayed or filled tooth. T-tests were used to assess for significant differences. There was even representation of males (50%) and females (50%). Mean dft was 1.08 overall, and 3.14 for children with dft>0. The level of untreated decay, %d/ dft, was 91%, significantly higher than the US national population which is 76% overall, and 76% for African Americans and Mexican Americans within the US national population. The children in this population have higher caries prevalence and a higher level of untreated caries than the national means as reported in NHANES III. The high level of untreated decay found in this particularly disadvantaged community suggests that enhanced dental services targeting the very young are needed in these communities.

Assessment of Retention and Resistance Form of Tooth Preparations for All Ceramic Restorations using Digital Imaging Technique.

PubMed

Muruppel, Alex M; Thomas, Joyce; Saratchandran, Sudeep; Nair, Dinesh; Gladstone, Sheeba; Rajeev, Milen M

2018-02-01

This in vitro study evaluated the resistance form of die preparations for all ceramic restorations and, thereby, explored the concept of effective taper and its correlation between the ideal in theory and actual in the clinical situation by analyzing the digital images of the die preparations. Scanned digital images of 114 die preparations for all ceramic restorations (n = 114) were collected from a dental laboratory. All the images were also analyzed digitally using Adobe Photoshop® software to analyze the degree of taper (angle of convergence) of each preparation and then applied the Zuckerman's circle, and the Lewis perpendicular methods were used to measure the resistance form. For the current study, the overall average degree of taper was found to be 20.9° (range, 2-80°), which is more than what is recommended by most previous studies and also sharply greater than the textbook ideal of 3 to 6°. Mean degree of taper for maxillary was 17.56° (anterior-10.50°, posterior-23.7°), and for mandibular teeth, it was 25.22° (anterior-15°, posterior- 28.45°). Out of the 64 analyzed images of maxillary teeth, 61 presented resistance form, while 3 were without it. Out of the 50 mandibular teeth analyzed, 38 possessed resistance form, whereas 12 were without. All the anterior teeth showed resistance form irrespective of the arch. The degree of taper showed a significant relationship with resistance and retention form, which was inversely proportional to each other. The recommended "degree of taper" is not always the clinically achievable as advocated in textbooks, as it is modified by various factors in the actual clinical situation. The study provides scientific background regarding the relationship between the degree of taper with resistance and retention form, and the relationship was found to be inversely proportional to each other. The recommended "degree of taper" is not always the clinically achievable as advocated in textbooks, and it is modified by various modifying or limiting factors in the actual clinical situation.

Prosthodontic Rehabilitation of the Patient with Severely Worn Dentition: A Case Report

PubMed Central

Hatami, Mahnaz; Sabouhi, Mahmoud; Samanipoor, Siamak; Badrian, Hamid

2012-01-01

The management of tooth wear has been a subject of increasing interest from both preventive and restorative points of view. This paper describes the full mouth rehabilitation of a 63-year-old bruxer man with a severely worn dentition and other dental problems including unsuitable restorations and several missing teeth. The treatment entailed using cast posts and cores, metal-ceramic restorations, and a removable partial denture. As with the treatment procedure of such cases, equal-intensity centric occlusal contacts on all teeth and an anterior guidance in harmony with functional jaw movements were especially taken into account. PMID:22830062

[Application of digital design of orthodontic-prosthodontic multidisciplinary treatment plan in esthetic rehabilitation of anterior teeth].

PubMed

Liu, Y S; Li, Z; Zhao, Y J; Ye, H Q; Zhou, Y Q; Hu, W J; Liu, Y S; Xun, C L; Zhou, Y S

2018-02-18

To develop a digital workflow of orthodontic-prosthodontic multidisciplinary treatment plan which can be applied in complicated anterior teeth esthetic rehabilitation, in order to enhance the efficiency of communication between dentists and patients, and improve the predictability of treatment outcome. Twenty patients with the potential needs of orthodontic-prosthodontic multidisciplinary treatment to solve their complicated esthetic problems in anterior teeth were recruited in this study. Digital models of patients' both dental arches and soft tissues were captured using intra oral scanner. Direct prosthodontic (DP) treatment plan and orthodontic-prosthodontic (OP) treatment plan were carried out for each patient. For DP treatment plans, digital wax-up models were directly designed on original digital models using prosthodontic design system. For OP treatment plans, virtual-setups were performed using orthodontic analyze system according to orthodontic and esthetic criteria and imported to prosthodontic design system to finalize the digital wax-up models. These two treatment plans were shown to the patients and demonstrated elaborately. Each patient rated two treatment plans using visual analogue scales and the medians of scores of two treatment plans were analyzed using signed Wilcoxon test. Having taken into consideration various related factors, including time, costs of treatment, each patient chose a specific treatment plan. For the patients chose DP treatment plans, digital wax-up models were exported and printed into resin diagnostic models which would be utilized in the prosthodontic treatment process. For the patients chose OP treatment plans, virtual-setups were used to fabricate aligners or indirect bonding templates and digital wax-up models were also exported and printed into resin diagnostic models for prosthodontic treatment after orthodontic treatment completed. The medians of scores of DP treatment plan and OP treatment plan were calculated and analyzed by IBM SPSS 20. The median of scores of DP treatment plan was 8.4, the minimum value was 6.9 and the maximum value was 9.3. The median of scores of OP treatment plan was 9.0, the minimum value was 7.9 and the maximum value was 9.6. The median of scores of OP was significantly higher than that of DP (Z=-3.23, P<0.01). Finally, 12 patients chose OP treatment plans and 8 patients chose DP treatment plans. For cases with complex esthetic problems in anterior teeth, a digital workflow can demonstrate final treatment outcome and help patients make suitable treatment decisions. In our study, the orthodontic-prosthodontic multidisciplinary treatment plan is feasible which can provide predictions of treatment outcome and improve esthetic outcome with patients' satisfaction.

Multidisciplinary Approach for Restoring Function and Esthetics in a Patient with Amelogenesis Imperfecta: A Clinical Report

PubMed Central

Kamble, Vaibhav D; Parkhedkar, Rambhau D

2013-01-01

Amelogenesis Imperfecta (AI) is a genetically determined and enamel mineralization defect reported, depicted as “Hereditary brown teeth.” AI is characterized as a clinical entity and its clinical manifestations, histological appearance, and genetic pattern are characterized by their heterogeneity. The need for prosthodontic management of this group of patients varies. Some patients need oral hygiene instructions only, whereas others need extensive dental treatment that includes composite restorations, metal ceramic crowns, all ceramic crowns, porcelain veneers. A 20-year-old male patient presented with sensitive, discoloured, and mutilated teeth, with a decreased vertical dimension of occlusion. The 4-year recall examination revealed no pathology associated with the full mouth rehabilitation, and the patient’s aesthetic and functional expectations were satisfied. The rehabilitation included all-ceramic crowns on anterior teeth and metal-ceramic crowns on posterior teeth following endodontic treatment and a crown-lengthening procedure for eliminating tooth sensitivity, improving the aesthetics and occlusion, and for restoring function. PMID:24551735

Congenitally missing teeth (hypodontia): A review of the literature concerning the etiology, prevalence, risk factors, patterns and treatment

PubMed Central

Rakhshan, Vahid

2015-01-01

Congenitally missing teeth (CMT), or as usually called hypodontia, is a highly prevalent and costly dental anomaly. Besides an unfavorable appearance, patients with missing teeth may suffer from malocclusion, periodontal damage, insufficient alveolar bone growth, reduced chewing ability, inarticulate pronunciation and other problems. Treatment might be usually expensive and multidisciplinary. This highly frequent and yet expensive anomaly is of interest to numerous clinical, basic science and public health fields such as orthodontics, pediatric dentistry, prosthodontics, periodontics, maxillofacial surgery, anatomy, anthropology and even the insurance industry. This essay reviews the findings on the etiology, prevalence, risk factors, occurrence patterns, skeletal changes and treatments of congenitally missing teeth. It seems that CMT usually appears in females and in the permanent dentition. It is not conclusive whether it tends to occur more in the maxilla or mandible and also in the anterior versus posterior segments. It can accompany various complications and should be attended by expert teams as soon as possible. PMID:25709668

Micro-CT evaluation of apical delta morphologies in human teeth.

PubMed

Gao, Xianhua; Tay, Franklin R; Gutmann, James L; Fan, Wei; Xu, Ting; Fan, Bing

2016-11-07

The apical delta is an intricate system within the root canal and incompletely debridement may affect the long-term prognosis of root canal therapy. The aim of the present study is to investigate the morphologic features of apical deltas in human teeth with micro-computed tomography (micro-CT) using a centreline-fitting algorithm. One hundred and thirty-six apical deltas were detected in 1400 teeth. Molars had more apical deltas (15.8%) than anterior teeth (6.3%). In maxillary molars, the mesiobuccal root had a significantly higher prevalence of apical delta than the palatal root or the distobuccal root. The median vertical distance of the apical delta was 1.87 mm with 13% more than 3 mm. The median diameter and length of the apical delta branches were 132.3 and 934.5 μm. Apical delta branches were not straight with cross-sectional shapes being non-circular. These morphological features of apical delta may complicate debridement of the infected root canal system.

Comparing the occlusal contact area of individual teeth during low-level clenching.

PubMed

Nishimori, Hideta; Iida, Takashi; Kamiyama, Hirona; Komoda, Yoshihiro; Obara, Ryoko; Uchida, Takashi; Kawara, Misao; Komiyama, Osamu

2017-09-14

The aim of this study was to investigate the occlusal contact area (OCA) in individual teeth during low-level tooth clenching in 24 healthy participants. Before measurements were made, the 100% maximum voluntary contraction (MVC) was determined. At baseline, all subjects were instructed to close their mouth and touch the opposing teeth with minimal force. Occlusal contact was recorded during three jaw motor tasks (baseline, 20% MVC, and 40% MVC) using a blue silicone material. OCA thickness was determined from images and defined on five levels: level 1 (0-149 µm), level 2 (0-89 µm), level 3 (0-49 µm), level 4 (0-29 µm), and level 5 (0-4 µm). Premolar and molar OCAs increased significantly from baseline to 20% MVC and 40% MVC. The OCA of each anterior tooth did not change significantly with increasing clenching intensity at all levels. Our findings suggest that premolar and molar OCAs may be altered by low-intensity clenching, affecting the teeth and periodontal tissues.

Interdisciplinary Full Mouth Rehabilitation of a Patient with Amelogenesis Imperfecta: A Case Report with 8 Years Follow-up

PubMed Central

Sreedevi, S; Sanjeev, R; Ephraim, Rena; Joseph, Mathai

2014-01-01

This case report deals with the interdisciplinary approach of a 28-year-old lady with Amelogenesis imperfecta of the hypoplastic kind. The patient came with a chief illness of worn out teeth, unsatisfactory esthetics and severe sensitivity of teeth. Her family history revealed a related situation in her father’s brother and her sister. On clinical assessment, the crowns of all teeth were worn out. The plan of the treatment was to protect as much tooth structure, restore the vertical dimension, and improve esthetics and masticatory function. The treatment procedures involved prosthodontic, endodontic, and periodontic interventions. After recording the vertical height, endodontic treatment and crown lengthening were performed with respect to the lower anteriors. The lost vertical height was regained in stages by insertion of full coverage crowns for all the teeth. The patient’s esthetic and functional needs were met with systematic and sequential interdisciplinary treatment approach. PMID:25628493

Micro-computed tomographic analysis of progression of artificial enamel lesions in primary and permanent teeth after resin infiltration.

PubMed

Ozgul, Betul Memis; Orhan, Kaan; Oz, Firdevs Tulga

2015-09-01

We investigated inhibition of lesion progression in artificial enamel lesions. Lesions were created on primary and permanent anterior teeth (n = 10 each) and were divided randomly into two groups with two windows: Group 1 (window A: resin infiltration; window B: negative control) and Group 2 (window A: resin infiltration + fluoride varnish; window B: fluoride varnish). After pH cycling, micro-computed tomography was used to analyze progression of lesion depth and changes in mineral density. Resin infiltration and resin infiltration + fluoride varnish significantly inhibited progression of lesion depth in primary teeth (P < 0.05). Inhibition of lesion depth progression in permanent teeth was significantly greater after treatment with resin infiltration + fluoride varnish than in the negative control (P < 0.05). Change in mineral density was smaller in the resin infiltration and resin infiltration + fluoride varnish groups; however, the difference was not significant for either group (P > 0.05). Resin infiltration is a promising method of inhibiting progression of caries lesions.

Analysis of factors associated with cracked teeth.

PubMed

Seo, Deog-Gyu; Yi, Young-Ah; Shin, Su-Jung; Park, Jeong-Won

2012-03-01

The purpose of this study was to analyze the characteristics, distribution, and associated factors of longitudinal fractured teeth according to the well-defined criteria of the American Association of Endodontists (AAE). One hundred seven teeth with longitudinal fracture from 103 patients were diagnosed and analyzed. The patients' signs, symptoms, age, and sex were noted as well as the tooth number, dental arch, filling materials, size/classification of restoration, crack direction, pulp vitality, whether the patient had undergone endodontic treatment, bite test results, percussion test results, wear facet, and periodontal pocket depth. Eighty-seven teeth were diagnosed with a cracked tooth (81.3%), 14 were diagnosed with vertical root fracture (VRF, 13.1%), 4 had a split tooth (3.7%), and 2 had a fractured cusp (1.9%); 82.2% showed a sensitive reaction on the bite test. Longitudinal tooth fractures were observed most frequently in patient in their 40s. The upper first molar (28.0%) was most frequently cracked, followed by the lower first molar (25.2%), the lower second molar (20.6%), and the upper second molar (16.8%). Most longitudinal tooth fractures (72.0%) occurred mainly in restored teeth, whereas only 28.0% were found in intact teeth. Compared with resin (4.7%) or porcelain (0.9%), the use of nonbonded inlay restoration materials such as gold (20.5%) or amalgam (18.7%) increased the occurrence of longitudinal tooth fractures. Out of 107 of longitudinal fractured teeth, 33 (30.8%) were treated endodontically and 74 (69.2%) were not. VRF was associated with endodontic treatment. The bite test is most reliable for reproducing symptoms. The combined use of various examination methods is recommended for detecting cracks and minutely inspecting all directions of a tooth. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Awareness, attitudes, need and demand on replacement of missing teeth among a group of partially dentate patients attending a University Dental Hospital.

PubMed

Jayasinghe, Rasika Manori; Perera, Janana; Jayasinghe, Vajira; Thilakumara, Indika P; Rasnayaka, Sumudu; Shiraz, Muhammad Hanafi Muhammad; Ranabahu, Indra; Kularatna, Sanjeewa

2017-07-27

Our objective was to assess awareness, attitudes, need and demand on replacement of missing teeth according to edentulous space, age, gender, ethnicity, educational level and socio-economical status of the patient. 76.2% of the study group was opined that the missing teeth should be replaced by prosthetic means. Majority were keen in getting them replaced mainly for the comfort in mastication. Although 77.9 and 32.9% were aware of the removable prostheses and implants respectively, only 25.2% knew about tooth supported bridges as an option of replacement of missing teeth. Participants' awareness on tooth and implant supported prostheses is at a higher level. Participants' opinion on need of regular dental visit was statistically significant when gender, ethnicity and education level were considered. The highest demand for replacement of missing teeth was observed in Kennedy class I and II situations in both upper and lower arches. Demand for fixed prostheses was significantly highest in Kennedy class II in upper and lower arches. In conclusion, although removable prosthodontic options are known to most of the patients, their awareness on tooth and implant supported prostheses is also at a higher level. The highest demand for replacement of missing teeth is by patients with Kennedy class I and II situations whereas Kennedy class II being the category with highest demand for fixed prostheses. We recommend that the location of missing teeth to be considered as a priority when educating patients on the most appropriate prosthetic treatment options. Dentists' involvement in educating patients on prosthetic options needs to be improved.

Prevalence of dental developmental anomalies of permanent teeth in children and their influence on esthetics.

PubMed

Fekonja, Anita

2017-07-08

The aim of this study was to determine the prevalence of dental developmental anomalies in permanent teeth and their influence on esthetics. The records of 473 subjects, which comprised of orthopantomograms, clinical examination, and anamnestic data, were explored for dental developmental anomalies. Subjects with dental anomalies completed the modified questionnaire. Data on reasons for seeking the treatment as well as factors affecting the patients' satisfaction were collected. The data were processed using the Chi-square test. It was found that 79 subjects (16.7%) had at least 1 dental developmental anomaly. The most common anomalies were hypodontia (7.2%), followed by talon cusps (3.4%), and microdontia (2.5%). Hypodontia, microdontia, and talon cusps were found more prevalent in females than males, whereas hyperdontia and macrodontia were more common in males. The reason for dissatisfaction with their smile in most cases was due to missing teeth or spacing between anterior teeth (excess space 2.9 mm ± 1.1 mm), followed by crowding of anterior teeth (lack of space 3.1 mm ± 0.8mm), difficulty maintaining oral hygiene and midline asymmetry (1.8 mm ± 0.9 mm). All subjects were treated using a fixed orthodontic appliance and 30 (37.9%) of them had additional dental specialists included to achieve good esthetics and function. Overall, 92.4% of subjects were satisfied with their resulting appearance after treatment. Dental developmental anomalies are clinically evident abnormalities. They may be the cause of various dental problems and can influence esthetics and the development of orthodontic problems. This paper evaluates the distribution of dental developmental anomalies and their influence on esthetics and function. Careful observation and appropriate investigation are required to diagnose the condition and institute treatment. The therapeutic approach to some dental anomalies should be interdisciplinary. © 2017 Wiley Periodicals, Inc.

Over two hundred million injuries to anterior teeth attributable to large overjet: a meta-analysis.

PubMed

Petti, Stefano

2015-02-01

The association between large overjet and traumatic dental injuries (TDIs) to anterior teeth is documented. However, observational studies are discrepant and generalizability (i.e. external validity) of meta-analyses is limited. Therefore, this meta-analysis sought to reconcile such discrepancies seeking to provide reliable risk estimates which could be generalizable at global level. Literature search (years 1990-2014) was performed (Scopus, GOOGLE Scholar, Medline). Selected primary studies were divided into subsets: 'primary teeth, overjet threshold 3-4 mm' (Primary3); 'permanent teeth, overjet threshold 3-4 mm' (Permanent3); 'permanent teeth, overjet threshold 6 ± 1 mm' (Permanent6). The adjusted odds ratios (ORs) were extracted. To obtain the highest level of reliability (i.e. internal validity), the pooled OR estimates were assessed accounting for between-study heterogeneity, publication bias and confounding. Result robustness was investigated with sensitivity and subgroup analyses. Fifty-four primary studies from Africa, America, Asia and Europe were included. The sampled individuals were children, adolescents and adults. Overall, there were >10 000 patients with TDI. The pooled OR estimates resulted 2.31 (95% confidence interval - 95CI, 1.01-5.27), 2.01 (95CI, 1.39-2.91) and 2.24 (95CI, 1.56-3.21) for Primary3, Permanent3 and Permant6, respectively. Sensitivity and subgroup analyses corroborated these estimates. Reliability and generalizability of pooled ORs were high enough and made it possible to assess that the fraction of global TDIs attributable to large overjet is 21.8% (95CI, 9.7-34.5%) and that large overjet is co-responsible for 235 008 000 global TDI cases (95CI, 104,760,000-372,168,000). This high global burden of TDI suggests that preventive measures must be implemented in patients with large overjet. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Determination of fracture toughness of human permanent and primary enamel using an indentation microfracture method.

PubMed

Hayashi-Sakai, Sachiko; Sakai, Jun; Sakamoto, Makoto; Endo, Hideaki

2012-09-01

The purpose of the present study was to examine the fracture toughness and Vickers microhardness number of permanent and primary human enamel using the indentation microfracture method. Crack resistance and a parameter indirectly related to fracture toughness were measured in 48 enamel specimens from 16 permanent teeth and 12 enamel specimens obtained from six primary teeth. The Vickers microhardness number of the middle portion was greater than the upper portion in primary enamel. The fracture toughness was highest in the middle portion of permanent enamel, because fracture toughness greatly depends upon microstructure. These findings suggest that primary teeth are not miniature permanent teeth but have specific and characteristic mechanical properties.

Pre-eruptive intracoronal resorption in a third upper molar: clinical, tomographic and histological analysis.

PubMed

Lenzi, R; Marceliano-Alves, M F; Alves, Frf; Pires, F R; Fidel, S

2017-06-01

Radiolucent or hypodense lesions in the crown of unerupted teeth may be due to pre-eruptive intracoronal resorption. Clinicians must be aware of this risk so that they can diagnose and appropriately treat this condition. The purpose of this study is to present a well-documented clinical case of pre-eruptive intracoronal resorption in an impacted third upper left molar of a 63 year old female patient. This was an unexpected finding, which occurred after cone-beam computed tomography was used to investigate the first upper left molar, which had an acute periradicular abscess. A multidisciplinary team followed up the case to describe clinical, radiographic and histological findings. The available treatment options were discussed, and the tooth extraction was the option chosen. Previous case studies describing such resorption in third upper molars have not been reported. This case shows that all permanent teeth in a pre-eruptive stage must be analysed radiographically to detect early pre-eruptive intracoronal resorption. © 2016 Australian Dental Association.

Quantitative digital subtraction radiography in the assessment of external apical root resorption induced by orthodontic therapy: a retrospective study.

PubMed

Sunku, Raghavendra; Roopesh, R; Kancherla, Pavan; Perumalla, Kiran Kumar; Yudhistar, Palla Venkata; Reddy, V Sridhar

2011-11-01

The objective of this study was to evaluate density changes around the apices of teeth during orthodontic treatment by using digital subtraction radiography to measure the densities around six teeth (maxilla central incisors, lateral incisors, and canines) before and after orthodontic treatment in 36 patients and also assess treatment variables and their coorelation with root resorption. A total of 36 consecutive patient files were selected initially. The selected patients presented with a class I or II relationship and were treated with or without premolar extractions and fixed appliances. Some class II patients were treated additionally with extraoral forces or functional appliances. External apical root resorption (EARR) per tooth in millimeters was calculated and was also expressed as a percentage of the original root length. Image reconstruction and subtraction were performed using the software Regeemy Image Registration and Mosaicing (version 0.2.43-RCB, DPI-INPE, Sao Jose dos Campos, Sao Paulo, Brazil) by a single operator. A region of interest (ROI) was defined in the apical third of the root and density calibration was made in Image J® using enamel (gray value = 255) as reference in the same image. The mean gray values in the ROIs were reflective of the change in the density values between the two images. The root resorption of the tooth and the factors of malocclusion were analyzed with a one-way ANOVA. An independent t-test was performed to compare the mean amount of resorption between male and female, between extraction and nonextraction cases. The density changes after orthodontic treatment were analyzed using the Wilcoxon signedrank test. In addition, the density changes in different teeth were analyzed using the Kruskal-Wallis test. The cut-off for statistical significance was a p-value of 0.05. All the statistical analyses were carried out using SPSS (version 13.0 for Windows, Chicago, IL, USA). Gender, the age at which treatment was started and Angle's classification was not statistically related with observed root resorption. The mean percentage density reduction as assessed by DSR was greatest in both central incisor: by 27.2 and 25.2% in the upper-right and upper-left central incisors, respectively, followed by the upper-right and upper-left canine teeth (23.5 and 21.0%) and then the upper-right and upper-left lateral incisors (19.1 and 17.4%). Tooth extraction prior to treatment initiation and the duration of orthodontic treatment was positively correlated with the amount of root resorption. DSR is useful for evaluating density changes around teeth during orthodontic treatment. The density around the apices of teeth reduced significantly after the application of orthodontic forces during treatment. Assessment of density changes on treatment radiographs of patients undergoing orthodontic therapy may help in the monitoring of external apical root resorption during course of treatment.

Prevalence of Sinus Tract in the Patients Visiting Department of Endodontics, Kermanshah School of Dentistry.

PubMed

Miri, Shima Sadat; Atashbar, Omid; Atashbar, Fardin

2015-04-23

Sinus tract is one of the manifestations of chronic dental infections, which is a path for the drainage of the infection and pus. The present study was aimed to investigate the prevalence of sinus tract with dental origin analyze the correlation between sinus tract and related factors. This study was conducted on 1527 patients, visiting Kermanshah school of dentistry, in 2014.The related teeth were examined in terms of vitality test and exact location of sinus tract. Moreover, the causes of this lesion and the needs for root canal treatment were assessed in these teeth. Having obtained the data from the patients, analyzed by Mann-Whitney, Chi-square tests. The frequency of sinus tract was 9.89% patients. There was a significant correlation between the prevalence of sinus tract and factors such as age, general health status, location of sinus tract and history of root canal treatment. The prevalence of sinus tract in maxilla was higher than the mandible (p=0.087). The prevalence of sinus tract in the posterior teeth (69.54%) was significantly higher than that of anterior teeth (30.46%) (p=0.000). From 724 teeth with periapical inflammation and radiolucency, 9.89% teeth had odontogenic sinus tract, and 23.42% teeth with history of root canal treatment had sinus tract. The most common cause of sinus tract incidence was previous root canal treatment. Therefore, clinicians need to pay a more attention to examining the posterior teeth referred for endodontic treatment.

Distribution of dental plaque and gingivitis within the dental arches.

PubMed

Sreenivasan, Prem K; Prasad, Kakarla V V

2017-10-01

Objective The natural accumulation of supragingival plaque on surfaces of human teeth is associated with gingival inflammation and the initiation of common oral diseases. This study evaluated the distribution of dental plaque and gingivitis scores within the dental arches after prophylaxis. Methods Adult subjects from the Dharwad, India area representing the general population who provided written informed consent were scheduled for screening. Healthy subjects over the age of 18 years, not currently requiring any medical or dental care, and presenting with a complement of at least 20 natural teeth were recruited for this parallel design study. Enrolled subjects (n = 41) underwent oral examinations for dental plaque (PI) and gingivitis (GI) using the Turesky modification of the Quigley-Hein and the Löe-Silness Index, respectively, at the baseline visit, followed by a whole mouth dental prophylaxis. Subjects were given fluoride toothpaste for twice daily oral hygiene for the next 30 days. Subjects were recalled on days 15 and 30 for PI and GI examinations identical to baseline. Results Analyses indicated that mean scores for PI and GI on either arch and the whole mouth were higher than 2 and 1, respectively, during all examinations. Anterior surfaces consistently exhibited lower PI scores than posterior regions of either arch, or the entire dentition. Regional GI differences within the dentition were similar to PI scores, with lower scores on anterior than posterior teeth. Prophylaxis reduced both the frequency and mean scores of both PI and GI, irrespective of arch, with lower scores observed on anterior than posterior regions during all recall visits. Molar and lingual regions consistently exhibited higher PI and GI scores compared with anterior surfaces. At all examinations, mean scores for both plaque and gingivitis were higher on approximal vestibular than mid-vestibular surfaces. Conclusions Differences observed in PI and GI within the dentition have several practical implications: (a) there are advantages of whole mouth assessments for oral health (b) a need for oral hygiene formulations to reduce the larger deposits of dental plaque in the posterior region and resultant gingival inflammation, and (c) a requirement for ongoing oral hygiene education.

Correlation between three color coordinates of human teeth.

PubMed

Lee, Yong-Keun

2014-11-01

The objective was to determine whether there were significant correlations in the three color coordinates within each of two color coordinate systems, such as the Commission Internationale de l’Eclairage (CIE) L*a*b* system, and the lightness, chroma, and hue angle system, of human vital teeth. The color of six maxillary and six mandibular anterior teeth was measured by the Shade Vision System. Pearson correlations between each pair of the color coordinates were determined (α=0.01 ). The influence of two color coordinates on the other color coordinate was determined with a multiple regression analysis (α=0.01 ). Based on correlation analyses, all the color coordinate pairs showed significant correlations except for the chroma and hue angle pair. The CIE L* was negatively correlated with the CIE a*,b*, and chroma, but positively correlated with the hue angle. The CIE a* was positively correlated with the CIE b* and chroma. Tooth color coordinates were correlated each other. Lighter teeth were less chromatic both in the CIE a* and b* coordinates. Therefore, it was postulated that the three color coordinates of human teeth were harmonized within certain color attribute ranges, and a lack of correlations in these coordinates might indicate external/internal discolorations and/or anomalies of teeth.

Correlation between three color coordinates of human teeth

NASA Astrophysics Data System (ADS)

Lee, Yong-Keun

2014-11-01

The objective was to determine whether there were significant correlations in the three color coordinates within each of two color coordinate systems, such as the Commission Internationale de l'Eclairage (CIE) L*a*b* system, and the lightness, chroma, and hue angle system, of human vital teeth. The color of six maxillary and six mandibular anterior teeth was measured by the Shade Vision System. Pearson correlations between each pair of the color coordinates were determined (α=0.01). The influence of two color coordinates on the other color coordinate was determined with a multiple regression analysis (α=0.01). Based on correlation analyses, all the color coordinate pairs showed significant correlations except for the chroma and hue angle pair. The CIE L* was negatively correlated with the CIE a*, b*, and chroma, but positively correlated with the hue angle. The CIE a* was positively correlated with the CIE b* and chroma. Tooth color coordinates were correlated each other. Lighter teeth were less chromatic both in the CIE a* and b* coordinates. Therefore, it was postulated that the three color coordinates of human teeth were harmonized within certain color attribute ranges, and a lack of correlations in these coordinates might indicate external/internal discolorations and/or anomalies of teeth.

Immediate implants placed into infected sockets: a case report with 3-year follow-up.

PubMed

Naves, Marina de Melo; Horbylon, Bruna Zacharias; Gomes, Camila de Freitas; Menezes, Helder Henrique Machado de; Bataglion, César; Magalhães, Denildo de

2009-01-01

The esthetics and functional integrity of the periodontal tissue may be compromised by dental loss. Immediate implants became a viable option to maintain the periodontal architecture because of their anatomic compatibility with the dental socket and the possibility of eliminating local contamination. This article describes the procedure of immediate implant placement in the anterior maxilla replacing teeth with chronic periapical lesions, which were condemned due to endodontic lesions persisting after failed endodontic treatment and endodontic surgery, and discusses the relationship between the procedure and periapical lesions. Surgical removal of hopeless teeth 11, 12 and 21 was performed conservatively in such a way to preserve the anatomy and gingival esthetics. A second surgical access was gained at the apical level, allowing the debridement of the surgical chamber for elimination of the periapical lesion, visual orientation for setting of the implants and filling of the surgical chamber with xenogenous bovine bone graft. After this procedure, the bone chamber was covered with an absorbent membrane and the healing screws were positioned on the implants. Later, a provisional partial removable denture was installed and the implants were inserted after 6 months. After 3 years of rehabilitation, the implants present satisfactory functional and esthetic conditions, suggesting that immediate implant placement combined with guided bone regeneration may be indicated for replacing teeth lost due to chronic periapical lesions with endodontic failure history in the anterior maxilla.

Standards of teeth preparations for anterior resin bonded all-ceramic crowns in private dental practice in Jordan

PubMed Central

AL-DWAIRI, Ziad Nawaf; AL-HIYASAT, Ahmad Saleh; ABOUD, Haitham

2011-01-01

Objectives To investigate if general dental practitioners (GDPs) in private practice in Jordan follow universal guidelines for preparation of anterior teeth for resin bonded all-ceramic crowns (RBCs). Material and Methods A sample (n=100) of laboratory models containing 208 tooth preparations for IPS Empress and In Ceram, featuring work from different GDPs, was obtained from 8 commercial dental laboratories. Aspects of preparations were quantified and compared with accepted criteria defined following a review of the literature and recommendations of the manufactures' guidelines. Results Subgingival margins on the buccal aspect were noticed in 36% of the preparations, 54% demonstrated overpreparation with a tendency to overprepare the teeth on the mesiodistal plane more than buccolingual plane. Twenty percent of samples presented a shoulder finish line while a chamfer margin design was noticed in 39%. Twenty-nine percent and 12% of samples had either a feathered or no clear margin design respectively. Incisal under preparation was observed in 18% of dies of each type. Only 17% of all preparations were found to follow the recommended anatomical labial preparations while 29% of the RBC preparations were found to have the recommended axial convergence angle. In total, 43% of preparations were found to have the recommended depth of the finish line. Conclusions It was found that relevant guidelines for RBC preparations were not being fully adhered to in private practice in Jordan. PMID:21710098

Opinions of American and Swedish orthodontists about the role of erupting third molars as a cause of dental crowding.

PubMed

Tüfekçi, E; Svensk, D; Kallunki, J; Huggare, J; Lindauer, S J; Laskin, D M

2009-11-01

To compare the opinions of Swedish orthodontists and American orthodontists regarding the association between third molar eruption and dental crowding. A survey was distributed to Swedish orthodontists (n = 230) asking their views on the force exerted by erupting third molars, its relationship to crowding, and their recommendations for prophylactic removal. Results were compared with those from a similar study conducted in the United States. Chi square analysis was used to determine differences in responses to questions between Swedish and American orthodontists. P < or = .05 was considered significant. Both Swedish and American orthodontists believed that lower third molars were more likely than upper third molars to cause force (65% and 58% for Swedish and American orthodontists, respectively) and crowding (42% and 40%, respectively). No statistically significant differences were seen between the answers of American and Swedish orthodontists regarding the role of upper and lower third molars in causing crowding. Although only 18% of Swedish orthodontists "generally" or "sometimes" recommended prophylactic removal of mandibular third molars, 36% of American orthodontists "generally" or "sometimes" recommended removal (P < .0001). Most orthodontists in the United States and Sweden do believe that erupting lower third molars exert an anterior force; however, they also believe that these teeth "rarely" or "never" cause crowding of the dentition. The reason that more American orthodontists recommend prophylactic removal of mandibular third molars remains unexplained.

The 3-M syndrome. A heritable low birthweight dwarfism.

PubMed

Van Goethem, H; Malvaux, P

1987-10-01

Two male siblings and one girl with the 3-M syndrome are reported. The main clinical features include low birthweight, proportionate dwarfism, hatched-shaped cranio-facial configuration, abnormalities of mouth and teeth, short broad neck with prominent trapezius, pectus deformity, transverse grooves of anterior chest, and winged scapulae.

Orthodontic space closure without counterbalancing extractions in patients with bilateral aplasia of the lower second premolars.

PubMed

Zimmer, Bernd; Rottwinkel, Yvonne

2002-09-01

Orthodontic space closure in situations with bilateral aplastic lower second premolars without maxillary extractions is a rarely practiced treatment method. Due to the high risk of severe side effects, preference is currently given to the maintenance of deciduous second molars and subsequent prosthodontic solutions. As a combination of Class I push and Class II pull mechanics seemed likely to reduce secondary effects by transferring the anchorage site from the reactive lower anterior teeth to the more resistant upper arch, a clinical study was carried out in order to investigate effects and secondary effects of the mechanics. Casts, panoramic radiographs and lateral headfilms of 13 consecutively treated, non-selected adolescents (seven boys, six girls, mean age at start of treatment 13 years 4 months) were evaluated. In six patients a Jasper Jumper trade mark was inserted in addition for a mean period of 6 months. The treatment outcome after a mean period of 3 years and 1 month showed in almost all cases the desired Class III molar occlusion of one cusp width (+/- 1/4 cw) with overbite and overjet within the normal range. Analyses of static and dynamic occlusion revealed anterior/canine protected articulation and a satisfactory number of centric contact points. A significant space gain (p

Incidence of post-operative pain following single visit endodontics in vital and non-vital teeth: An in vivo study

PubMed Central

Bhagwat, Sumita; Mehta, Deepil

2013-01-01

This clinical study was conducted to compare the post-operative pain following single visit endodontics in vital and non-vital teeth, with and without periapical radiolucency. A total of 60 adult patients requiring root canal therapy in anterior and premolar teeth were selected for this study. Single sitting root canal treatment was carried out and the subjects were recalled after 2 weeks and instructed to fill out a series of self-report questionnaires for responses about pain in the interim after 1 day, 2 day, 3 day, 1 week and 2 weeks. In vital teeth (Group I) 60% of the treated cases had pain, of which 36% had mild pain (non-significant) and 24% had moderate pain (significant). In non-vital teeth without periapical radiolucency (Group II) 64% of cases had pain, of which 48% had mild pain (non-significant) and 16% had moderate pain (significant). In non-vital teeth with periapical radiolucency (Group III) 32% of the cases had pain of which 24% had mild pain (non-significant) and 8% had moderate pain (significant). None of the teeth in any of the groups had severe pain. There was no statistical difference between incidence of pain in vital and non-vital teeth without periapical radiolucency. Non-vital teeth with periapical radiolucency exhibited relatively less pain as compared with non-vital teeth without periapical radiolucency, but the pain continued in a significant percent of teeth even after 2 weeks. Pain incidence dropped significantly within a period of 1 day to 2 weeks in vital teeth and non-vital teeth without periapical radiolucency. There was a tendency for less incidence of significant pain after a single visit root canal treatment in these groups. Results obtained were comparable with those obtained by several investigators. PMID:24124293

Comparison of intra-oral and study cast measurements in the assessment of malocclusion.

PubMed

Ovsenik, Maja; Farcnik, Franc M; Verdenik, Ivan

2004-06-01

Malocclusion assessment methods are based on registrations and measurements made on study casts, which requires that impressions be taken. In addition to being costly and time-consuming, this process can be unpleasant for very young children. Therefore, the aim of this study was to evaluate the reliability of intra-oral measurements that compute a malocclusion index score to determine malocclusion severity in the mixed dentition. The research was part of a longitudinal study in Slovenia on a sample of 530 3-year-old children. At 8 years of age (mean 8.5 years, standard deviation 0.2), a cohort of 101 children (44 boys, 57 girls) was randomly selected in a cross-sectional study. Quantitative registrations of space and occlusal anomalies were performed intra-orally as well as on study casts. Kappa (kappa) statistics were used to evaluate the agreement between clinical and study cast malocclusion assessments. Systematic bias of measurements was tested using Wilcoxon's signed rank test. The results showed complete agreement between the two measurements for anterior crossbite, anterior open bite and overjet scores (kappa = 1); excellent reliability for the buccal segment relationship (kappa = 0.93), transverse occlusion of posterior teeth (kappa = 0.87); and substantial agreement for overbite (kappa = 0.79) and midline deviation (kappa = 0.71). For the remainder of the traits the agreement was moderate: rotation of incisors (kappa = 0.58), crowding of upper incisors (kappa = 0.51), axial inclination of teeth (kappa = 0.44) and lower incisor crowding (kappa = 0.41). Intra-orally small, but statistically significant scoring of lower incisor rotation and crowding was identified. On the study casts the most favourable axial inclination was found for buccal segment occlusion. Overall classification into severity grades, based on the total malocclusion score, showed excellent agreement between the two methods (kappa = 0.89), without statistically significant bias. Malocclusion assessment, recorded and measured intra-orally, is as reliable as assessment on study casts. The proposed method can be used in screening, in epidemiological studies and in clinical orthodontic assessment.

Comparative evaluation of Nano-Hydroxyapatite preparation and Calcium Sucrose Phosphate on microhardness of deciduous teeth after iron drop exposure - An in-vitro study.

PubMed

Rathi, Nilesh; Baid, Rutika; Baliga, Sudhindra; Thosar, Nilima

2017-04-01

To evaluate and compare the microhardness of deciduous teeth treated with nano-hydroxyapatite and calcium sucrose phosphate after iron drop exposure. Twenty healthy anterior deciduous teeth were collected and stored in 0.9% saline solution at room temperature. All the teeth were immersed in artificial saliva in an incubator shaker at 37° for an hour and then subjected to Vickers microhardness test at 100g load for 5 seconds. The teeth were then immersed in iron drop for 5 minutes, twice daily, rinsed with distilled water and kept in artificial saliva. This procedure was repeated for 7 days and teeth were subjected to microhardness testing. Further, the teeth were divided in two groups, each group containing 10 teeth. In group I, nanohydroxyapatite preparation and in group II, calcium sucrose phosphate were applied for 10 minutes, twice daily for 7 days and subjected again to microhardness testing again. Vickers microhardness analysis revealed that iron drop exposure to teeth caused significant decrease in microhardness ( p <0.05). Application of nanohydroxyapatite preparation in Group I showed significantly increased enamel microhardness (206.90) than that after iron drop exposure. Similarly, application of calcium sucrose phosphate in Group II showed significantly increased enamel microhardness (200.89) than that after iron drop exposure. Statistical difference was seen between the two groups, with nanohydroxyapatite preparation showing increased microhardness than calcium sucrose phosphate. Nanohydroxyapatite preparation and calcium sucrose phosphate have remineralizing effect over teeth affected by acid challenge of iron drops, nanohydroxyapatite preparation showing better results than calcium sucrose phosphate. Key words: Iron drops, Nanohydroxyapaptite, calcium sucrose phosphate, anticay.

Reconstructive surgery with chin block graft and esthetic rehabilitation of missing anterior tooth.

PubMed

Bansal, Preetika; Bansal, Pardeep

2014-03-01

The complete and predictable restoration of the periodontium following infection or trauma remains a critical objective in regenerative therapy. Bone grafts remain among the most widely used therapeutic strategies for the correction of periodontal osseous defects. For periodontally compromised anterior teeth, reconstruction of the ridge along with natural tooth pontic serves both the purpose of regeneration and esthetics. The right lower central incisor of a 28-year-old male that was periodontally compromised was extracted. Autogenous chin grafting followed by retrograde surgery of the extracted tooth and replacement by natural tooth pontic was done. After 6 months, there was significant improvement in clinical picture and bone fill. This procedure provided excellent regenerative and esthetic results for the periodontally compromised lost anterior tooth.

Survey on Restoration of Endodontically Treated Anterior Teeth: A Questionnaire Based Study

PubMed Central

Ratnakar, P; Bhosgi, Rashmi; Metta, Kiran Kumar; Aggarwal, Kanika; Vinuta, S; Singh, Navneet

2014-01-01

Background: The aim of endodontic and restorative dentistry is the conservation of natural tooth structure. Endodontically treated tooth (ETT) undergoes loss of tooth structure and changes in physical characteristics. Therefore, proper selection of restoration for ETT is mandatory. The clinical approach of restoring ETT needs taking into considerations several issues. However, the best way to restore teeth after root canal treatment has long been and still a controversial subject to debate. Therefore, this study was carried out to detect the frequency of preferred methods of restoring ETT under different conditions. Materials and Methods: A questionnaire was framed and distributed among prosthodontists, endodontist and general practitioners of north India region to find out the frequency of best suitable material and method regarding restoration of ETT. 220 questionnaires were sent by electronic mail out of which 110 were received back. The questionnaire contained different methods of restoration of endodontically treated anterior teeth at different conditions (percentages) of remaining sound tooth structure. Respondents were asked to indicate their preferred method of restoration of those teeth. Results: Results showed that majority of respondents (51.82%) preferred to restore the tooth only with a tooth-color restorative material in condition A. In condition B, majority of respondents preferred to use tooth colored crown (44.55%) and prefabricated post and tooth colored restoration (24.5%). Whereas in condition C, most of the respondents preferred to use a cast post and core/crown (80.91%). Conclusion: From the findings of the present study, it can be concluded that the unrestored ETT is susceptible to fracture, which could lead to loss of tooth and that the maximum preservation of healthy tooth structure and use of restorative materials with mechanical properties similar to dental structure favor greater longevity of tooth restoration complex. PMID:25628482

Evaluation of the closest speaking space in different dental and skeletal occlusions.

PubMed

Sakar, Olcay; Bural, Canan; Sülün, Tonguç; Öztaş, Evren; Marşan, Gülnaz

2013-04-01

The closest speaking space (CSS) together with the vertical overlap of anterior teeth during the production of the /s/ sound have not been previously investigated with respect to differences in dental and skeletal orthodontic classifications. The purpose of this study was to investigate the CSS in dental and skeletal occlusions and to analyze the cause and effect relationship of the CSS and the amount of the vertical overlap of anterior teeth. Poly vinylsiloxane interocclusal registration material was placed bilaterally onto the occlusal surfaces of premolar and molar teeth of 155 native Turkish speaking adolescent and young adult dentate participants, who were then asked to pronounce the word seyis. The thinnest point between the maxillary and mandibular teeth was recorded in millimeters as the CSS. The occlusion of each participant was classified according to the Angle dental and Steiner skeletal classifications. The differences in CSS values within each classification were statistically analyzed with the Kruskal-Wallis test, and the correlation between the CSS and the vertical overlap was statistically analyzed with the Spearman Rho Correlation tests (P<.05). The differences in the CSS were only significant between Angle Class II division 2 and Class III groups (P=.034), while the differences in the CSS between skeletal classes were not significant. The correlation between the amount of CSS and the amount of vertical overlap was not significant. The results showed that regardless of dental and skeletal occlusions, average CSS values could be used to determine the occlusal vertical dimension of prosthetic restorations. Copyright © 2013 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Interventions for the endodontic management of non-vital traumatised immature permanent anterior teeth in children and adolescents: a systematic review of the evidence and guidelines of the European Academy of Paediatric Dentistry.

PubMed

Duggal, M; Tong, H J; Al-Ansary, M; Twati, W; Day, P F; Nazzal, H

2017-06-01

This systematic review was undertaken in order to develop guidelines for the European Academy of Paediatric Dentistry for the management of non-vital permanent anterior teeth with incomplete root development. Three techniques were considered; apexification by single or multiple applications of calcium hydroxide, use of Mineral Trioxide Aggregate (MTA) for the creation of an apical plug followed by obturation of the root canal, and finally a Regenerative Endodontic Technique (RET). Scottish Intercollegiate Guideline Network (SIGN) Guidelines (2008) were used for the synthesis of evidence and grade of recommendation. Variable levels of evidence were found and generally evidence related to these areas was found to be weak and of low quality. It was not possible to produce evidence-based guidelines based on the strength of evidence that is currently available for the management of non-vital immature permanent incisors. Based on the available evidence the European Academy of Paediatric Dentistry proposes Good Clinical Practice Points as a guideline for the management of such teeth. It is proposed that the long term use of calcium hydroxide in the root canals of immature teeth should be avoided and apexification with calcium hydroxide is no longer advocated. The evidence related to the use of a Regenerative Endodontic Technique is currently extremely weak and therefore this technique should only be used in very limited situations where the prognosis with other techniques is deemed to be extremely poor. The current review supports the use of MTA followed by root canal obturation as the treatment of choice.

Surface-Sensitive Microwear Texture Analysis of Attrition and Erosion.

PubMed

Ranjitkar, S; Turan, A; Mann, C; Gully, G A; Marsman, M; Edwards, S; Kaidonis, J A; Hall, C; Lekkas, D; Wetselaar, P; Brook, A H; Lobbezoo, F; Townsend, G C

2017-03-01

Scale-sensitive fractal analysis of high-resolution 3-dimensional surface reconstructions of wear patterns has advanced our knowledge in evolutionary biology, and has opened up opportunities for translatory applications in clinical practice. To elucidate the microwear characteristics of attrition and erosion in worn natural teeth, we scanned 50 extracted human teeth using a confocal profiler at a high optical resolution (X-Y, 0.17 µm; Z < 3 nm). Our hypothesis was that microwear complexity would be greater in erosion and that anisotropy would be greater in attrition. The teeth were divided into 4 groups, including 2 wear types (attrition and erosion) and 2 locations (anterior and posterior teeth; n = 12 for each anterior group, n = 13 for each posterior group) for 2 tissue types (enamel and dentine). The raw 3-dimensional data cloud was subjected to a newly developed rigorous standardization technique to reduce interscanner variability as well as to filter anomalous scanning data. Linear mixed effects (regression) analyses conducted separately for the dependent variables, complexity and anisotropy, showed the following effects of the independent variables: significant interactions between wear type and tissue type ( P = 0.0157 and P = 0.0003, respectively) and significant effects of location ( P < 0.0001 and P = 0.0035, respectively). There were significant associations between complexity and anisotropy when the dependent variable was either complexity ( P = 0.0003) or anisotropy ( P = 0.0014). Our findings of greater complexity in erosion and greater anisotropy in attrition confirm our hypothesis. The greatest geometric means were noted in dentine erosion for complexity and dentine attrition for anisotropy. Dentine also exhibited microwear characteristics that were more consistent with wear types than enamel. Overall, our findings could complement macrowear assessment in dental clinical practice and research and could assist in the early detection and management of pathologic tooth wear.

Analysis of the gingival biotype based on the measurement of the dentopapillary complex

PubMed Central

Malhotra, Ranjan; Grover, Vishakha; Bhardwaj, Arvind; Mohindra, Kanika

2014-01-01

Background: The gingival morphology of the maxillary anterior region plays an important role in determining the final esthetic outcome. Knowledge of the periodontal biotype is of fundamental importance because the anatomical characteristics of the periodontium, such as gingival thickness, gingival width and alveolar bone morphology, will determine periodontium behavior when submitted to physical, chemical, or bacterial injury or during periodontal or implant surgical procedures and orthodontic treatment. Materials and Methods: 50 subjects with healthy periodontal tissues with no loss of attachment and (b) presence of all anterior teeth in both upper and lower jaw were selected. On clinical examination gingival thickness was recorded based on the transparency of periodontal probe. Following parameters are recorded from dental cast, i.e., crown length, crown width, papillary length (PL) and papillary width. Results: There was highly significant correlation between gingival biotype and crown length and area of papilla with P value −0.002 and 0.013 respectively. Significant correlation was found between area of crown and PL with P value −0.013 and 0.016. The results of discriminant function analysis showed that average crown length was the best single determinant of biotype and area of papilla was the next best choice. Conclusion: Within the limits of the current investigation, the existence and correlation of different gingival biotypes and dentopapillary complex dimension has been confirmed. These findings can be utilized as objective guidelines for determining the biotype and response of gingiva to many dental operative procedures. PMID:24744543

A Guided, Conservative Approach for the Management of Localized Mandibular Anterior Tooth Wear.

PubMed

Mehta, Shamir B; Francis, Selar; Banerji, Subir

2016-03-01

The successful management of the worn mandibular anterior dentition may present an awkward challenge to the dental operator. The purpose of this article is to describe a case report illustrating the use of a guided, three-dimensional protocol for the ultra-conservative and predictable restoration of the worn lower anterior dentition using direct resin composite. This technique utilizes information based on established biomechanical and occlusal principles to fabricate a diagnostic wax-up, which is duplicated in dental stone. This is used to prepare a vacuum-formed modified stent, assisting the clinician to place directly bonded resin composite restorations to restore the worn lower anterior dentition. The technique, described in 2012 and referred to as 'injection moulding' has the potential to offer optimal form, function and an aesthetic outcome in an efficient manner. CPD/Clinical Relevance: This article aims to describe an alternative technique to simplify the processes involved with restoration of worn lower anterior teeth.

Activation of the serratus anterior and upper trapezius in a population with winged and tipped scapulae during push-up-plus and diagonal shoulder-elevation.

PubMed

Park, Se-Yeon; Yoo, Won-Gyu

2015-01-01

Scapular winging and tipping are types of abnormal scapular kinematics, which is caused by not only the entrapment of peripheral nerve, but also imbalance of the scapulothoracic musculatures. The purpose of this study was to investigate the presence of muscular imbalance in the middle and lower parts of the serratus anterior and upper trapezius in people with scapular winging and tipping. Twenty male participants (age, 23.0 ± 1.92 y) were placed into symptomatic group (n = 10) and control group (n = 10). Participants completed two individual trials of a push-up plus, and a diagonal shoulder elevation, while electromyography (EMG) recorded muscle activity of the low and middle serratus anterior and upper trapezius. The root mean squared EMG values for three muscles were normalized using maximum voluntary isometric contractions (%MVIC). The value was calculated using modified isolation equation for comparing activation of middle and lower serratus anterior (%isolation). During a diagonal shoulder elevation, the % maximal voluntary isometric contraction (%MVIC) data showed that the symptomatic participants had significantly greater activation of the middle serratus anterior compared to the control group (P = 0.01). During a diagonal shoulder elevation, the symptomatic participants had not only significantly increased %isolation of the middle serratus anterior, but also significantly decreased for the lower serratus anterior compare with the control group (p = 0.00). Present result indicated that different muscle activation between middle and lower serratus anterior could represent in group with scapular dyskinesis, and need for selective activation of the lower serratus anterior in patients with scapular winging and tipping.

Microleakage of different temporary filling materials in primary teeth.

PubMed

Odabas, Mesut Enes; Tulunoglu, Ozlem; Ozalp, Serife Ozdemir; Bodur, Haluk

2009-01-01

The aim of this study was to compare the sealing properties of IRM, Coltosol, Cavit G, Adhesor and Clip, which used as temporary filling material in coronal access openings in extracted human primary teeth. Standardized access cavities of 2 x 2 mm were prepared in the eighty-four, caries-free human primary anterior teeth. The teeth were divided randomly into five groups of 16 teeth each. Temporary restorative materials Group A: IRM (Dentsply), Group B: Coltosol (Coltone), Group C: Cavit G (3M), Group D: Adhesor (Spofa Dental) and Group E: Clip (Voco) were applied according to the manufacturer's directions. The specimens were immersed silver nitrate and placed in film developer under fluorescent for 24 hours. The sectioned specimens were evaluated under a digital microscope at x 20 magnifications and blindly scored for microleakage. Clip presented the least microleakage value whereas; Adhesor and IRM presented the higher microleakage values. There were statistically significant differences between Clip and the others groups, while there were no statistically significant differences in microleakage between IRM, Adhesor, Coltosol and Cavit G. However the leakage scores of Clip and Cavit G were congruent (p = 0.454). Amongst the five materials, Clip exhibited a better sealing ability.

Sexual dimorphism in teeth? Clinical relevance.

PubMed

Radlanski, Ralf J; Renz, Herbert; Hopfenmüller, Werner

2012-04-01

Many morphometric studies show a sexual dimorphism in human teeth. We wanted to know whether it is possible to determine the sex of an individual if only the anterior teeth are visible. Fifty intraoral photographs showing the front tooth region of female and male individuals (age: from 7 to 75 years) were randomly arranged in actual size on a questionnaire. The lip region was covered in each case. Besides "female" and "male", one was also able to check "?" if undecided. The questionnaires were distributed to 50 expert test persons (dentists, dental technicians, dental assistants, and students of dental medicine) and to 50 laymen and were all returned for evaluation. Although the correct sex was recognized on single photographs to a maximum of 76%, it was incorrect in 69% on other photographs. Altogether, the statistical evaluation showed that in most cases, the sex was only recognized correctly by one half, and incorrect by the other half. It can be concluded that a sexual dimorphism of human teeth-although measurable morphometrically-could not be recognized visually on the basis of photographs of the front tooth region. Neither experts in the field of dentistry nor laymen were able to properly distinguish between male and female teeth.

Plasma cell gingivitis associated with inflammatory chelitis: a report on a rare case.

PubMed

Abhishek, Kandwal; Rashmi, Jindal

2013-07-01

Plasma cell gingivitis (PGC) is a rare disease of gingival tissues which is difficult to treat. It has a higher rate of reoccurrence and needs a detailed and careful analysis of etiology. Further, its association with chelitis is rare, only few cases have been reported and the condition with this presentation poses a diagnostic dilemma. This paper reports a 16 year old male with a complaint of bleeding and swelling of gingiva since 3 years. The gingival enlargement occurred on facial aspect of upper and lower anterior teeth involving attached gingival. He also presented with swelling of both lips which was recurrent and for the same duration of 3 years. Based on clinical features and histopathological findings, a diagnosis of plasma cell gingivitis with inflammatory chelitis was made. A detailed history of possible allergen exposure was taken and patch test was conducted to identify any such allergens. Other conditions were ruled out by blood investigation, detailed medical and drug history. A close collaboration between Periodontist and Dermatologist is essential to manage such a case.

Evaluation of chronic periapical lesions by digital subtraction radiography by using Adobe Photoshop CS: a technical report.

PubMed

Carvalho, Fabiola B; Gonçalves, Marcelo; Tanomaru-Filho, Mário

2007-04-01

The purpose of this study was to describe a new technique by using Adobe Photoshop CS (San Jose, CA) image-analysis software to evaluate the radiographic changes of chronic periapical lesions after root canal treatment by digital subtraction radiography. Thirteen upper anterior human teeth with pulp necrosis and radiographic image of chronic periapical lesion were endodontically treated and radiographed 0, 2, 4, and 6 months after root canal treatment by using a film holder. The radiographic films were automatically developed and digitized. The radiographic images taken 0, 2, 4, and 6 months after root canal therapy were submitted to digital subtraction in pairs (0 and 2 months, 2 and 4 months, and 4 and 6 months) choosing "image," "calculation," "subtract," and "new document" tools from Adobe Photoshop CS image-analysis software toolbar. The resulting images showed areas of periapical healing in all cases. According to this methodology, the healing or expansion of periapical lesions can be evaluated by means of digital subtraction radiography by using Adobe Photoshop CS software.

[Dental caries and fluorosis in children consuming water with different fluoride concentrations in Maiquetia, Vargas State, Venezuela].

PubMed

Montero, Maglynert; Rojas-Sanchez, Fátima; Socorro, Mairobys; Torres, José; Acevedo, Ana María

2007-03-01

The objective of this study was to determine the experience of fluorosis and dental caries in 8- 12 year old children that drink water with different fluoride concentrations, from Maiquetía, Vargas State. Four hundred and twenty-one children were evaluated and divided in groups of 84 children each, according with their age (8-9-10-11) but 85 for the age 12. This evaluation was developed by a calibrated dentist using Dean's Index for dental fluorosis examining only the six upper anterior teeth and DMFT/dmft index to determine dental caries, following the criteria established by the WHO. In addition, a social status questionnaire was given to the subjects and samples of water and salt from the communities were collected. Thirty-three per cent of the children in this study were males and 67% were females. Results indicated that the mean DMFT and dmft were 0.91 and 1.88, respectively, showing a total of 2.17 teeth with dental caries being the decayed component, the highest component observed in both dentitions. The mean prevalence of dental fluorosis for the studied population was 16.6%, where the very mild category (8.5%) predominated. Maria May was the most affected school with dental fluorosis (41.5%) and the fluoride concentration in drinking water after analyses was 1.58%. The results of this study indicate the presence of an inverse relationship between fluoride concentrations in the water collected at the schools and the prevalence of dental fluorosis in the permanent dentition of school children, but not in the primary dentition.

[Key points for esthetic rehabilitation of anterior teeth using chair-side computer aided design and computer aided manufacture technique].

PubMed

Yang, J; Feng, H L

2018-04-09

With the rapid development of the chair-side computer aided design and computer aided manufacture (CAD/CAM) technology, its accuracy and operability of have been greatly improved in recent years. Chair-side CAD/CAM system may produce all kinds of indirect restorations, and has the advantages of rapid, accurate and stable production. It has become the future development direction of Stomatology. This paper describes the clinical application of the chair-side CAD/CAM technology for anterior aesthetic restorations from the aspects of shade and shape.

Modified Nance palatal arch appliance for anterior tooth replacement.

PubMed

Sethi, Ntasha; Shanthraj, Srinivas L; Muraleedharan, Manju; Mallikarjuna, Rachappa

2013-06-07

The following case report presents a new and an innovative technique for the postextraction replacement of maxillary central incisors using the natural teeth as pontics. The novel appliance fabricated fully satisfied the demands of the adolescent patient for a fixed prosthetic, while fulfilling the aesthetic and functional requirements presented by the case.

Modified Nance palatal arch appliance for anterior tooth replacement

PubMed Central

Sethi, Ntasha; Shanthraj, Srinivas L; Muraleedharan, Manju; Mallikarjuna, Rachappa

2013-01-01

The following case report presents a new and an innovative technique for the postextraction replacement of maxillary central incisors using the natural teeth as pontics. The novel appliance fabricated fully satisfied the demands of the adolescent patient for a fixed prosthetic, while fulfilling the aesthetic and functional requirements presented by the case. PMID:23749860

Evaluation of technical quality and periapical health of root-filled teeth by using cone-beam CT

PubMed Central

Bilge Gülsüm, NUR; Evren, OK; ALTUNSOY, Mustafa; AĞLARCI, Osman Sami; ÇOLAK, Mehmet; GÜNGÖR, Enes

2014-01-01

Objective This study aimed to assess the quality of root fillings, coronal restorations, complications of all root-filled teeth and their association with apical periodontitis (AP) detected by cone-beam computed tomography (CBCT) images from an adult Turkish subpopulation. Material and Methods The sample for this study consisted of 242 patients (aging from 15 to 72 years) with 522 endodontically treated teeth that were assessed for technical quality of the root canal filling and periapical status of the teeth. Additionally, the apical status of each root-filled tooth was assessed according to the gender, dental arch, tooth type and age classification, undetected canals, instrument fracture, root fracture, apical resorption, apical lesion, furcation lesion and type and quality of the coronal structure. Statistical analysis was performed using percentages and chi-square test. Results The success rate of the root canal treatment was of 54.4%. The success rates of adequate and inadequate root canal treatment were not significantly different (p>0.05). Apical periodontitis was found in 228 (45.6%) teeth treated for root canals. Higher prevalence of AP was found in patients aging from 20 to 29 years [64 (27%) teeth] and in anterior (canines and incisors) teeth [97 (41%) teeth]. Conclusions The technical quality of root canal filling performed by dental practitioners in a Turkish subpopulation was consistent with a high prevalence of AP. The probable reasons for this failure are multifactorial, and there may be a need for improved undergraduate education and postgraduate courses to improve the clinical skills of dental practitioners in endodontics. PMID:25591019

Prevalence of Sinus Tract in the Patients Visiting Department of Endodontics, Kermanshah School of Dentistry

PubMed Central

Miri, Shima Sadat; Atashbar, Omid; Atashbar, Fardin

2015-01-01

Introduction: Sinus tract is one of the manifestations of chronic dental infections, which is a path for the drainage of the infection and pus. The present study was aimed to investigate the prevalence of sinus tract with dental origin analyze the correlation between sinus tract and related factors. Methods: This study was conducted on 1527 patients, visiting Kermanshah school of dentistry, in 2014.The related teeth were examined in terms of vitality test and exact location of sinus tract. Moreover, the causes of this lesion and the needs for root canal treatment were assessed in these teeth. Having obtained the data from the patients, analyzed by Mann-Whitney, Chi-square tests. Results: The frequency of sinus tract was 9.89% patients. There was a significant correlation between the prevalence of sinus tract and factors such as age, general health status, location of sinus tract and history of root canal treatment. The prevalence of sinus tract in maxilla was higher than the mandible (p=0.087). The prevalence of sinus tract in the posterior teeth (69.54%) was significantly higher than that of anterior teeth (30.46%) (p=0.000). From 724 teeth with periapical inflammation and radiolucency, 9.89% teeth had odontogenic sinus tract, and 23.42% teeth with history of root canal treatment had sinus tract. Conclusions: The most common cause of sinus tract incidence was previous root canal treatment. Therefore, clinicians need to pay a more attention to examining the posterior teeth referred for endodontic treatment. PMID:26153170

Histo-anatomic 3D printing of dental structures.

PubMed

Schweiger, J; Beuer, F; Stimmelmayr, M; Edelhoff, D; Magne, P; Güth, J F

2016-11-04

The creation of dental restorations with natural appearance and biomechanics represents a major challenge for the restorative team. The manufacturing-process of high-aesthetic restorations from tooth-coloured restorative materials is currently dominated by manual manufacturing procedures and the outcome is highly dependent on the knowledge and skills of the performing dental technician. On the other hand, due to the simplicity of the manufacturing process, CAD/CAM restorations from different material classes gain more and more acceptance in the daily routine. Multi-layered restorations show significant aesthetic advantages versus monolithic ones, but are difficult to fabricate using digital technologies. The key element for the successful automated digital fabrication of aesthetic anterior restorations seems to be the form of the individual dentine core as defined by dentine enamel junction (DEJ) covered by a more transparent layer of material imitating the enamel layer to create the outer enamel surface (OES). This article describes the possibilities and technologies available for so-called '4D-printing'. It introduces the digital manufacturing process of multilayered anterior teeth using 3D multipart printing, taking the example of manufacturing replicas of extracted intact natural teeth.

Oral Health Status among Children with Cerebral Palsy in Dubai, United Arab Emirates

PubMed Central

Al Hashmi, Haifa; Kowash, Mawlood; Hassan, Amar; Al Halabi, Manal

2017-01-01

Objectives: The purpose of this study was to assess the oral health status of children with cerebral palsy (CP) in Dubai, United Arab Emirates (UAE). Materials and Methods: Eighty-four CP and 125 healthy children were recruited from special needs centers and private/public schools in Dubai. A dental examination for decayed-missing-filled teeth in primary dentition (dmft)/Decayed-Missing-Filled teeth in permanent dentition (DMFT) indices, simplified oral hygiene index, calculus index (CI), and oral debris index was conducted. In addition, assessments of occlusal, dentofacial, soft tissue anomalies and erosion were conducted. Statistical analysis was conducted using SPSS for Windows, version 20.0 (SPSS Inc., Chicago, IL, USA). Results: DMFT/dmft scores were comparable in both groups. CI was significantly higher among children with CP. CP patients had a significantly higher proportion of anterior open bite, anterior spacing, Class II molar Angle malocclusion, trauma, high-arched palate, tongue thrust, lymphadenopathy, angular cheilitis, macroglossia, drooling, and erosion as compared to controls. Conclusions: The study highlighted peculiar characteristics and needs for the CP patients in Dubai, UAE. PMID:29285470

Comprehensive therapy of a fusion between a mandibular lateral incisor and supernumerary tooth: case report.

PubMed

Onçag, Ozant; Candan, Umit; Arikan, Fatih

2005-08-01

The term fusion is used to define a developmental anomaly characterised by the union of two adjacent teeth. In the case reported here, clinical and radiographic examinations suggested a unilateral fusion between the mandibular left permanent incisor and a super-numerary tooth. Radiographs showed that the fused teeth had two distinct pulp chambers and canals. A diagnosis of chronic periapical abscess of the supernumerary tooth was made. Before root canal therapy, a periodontal surgical procedure was performed to section the central incisor and its fused supernumerary. Also, odontoplasty was performed on the roots, to establish an anatomy consistent with a normal central incisor. Later, the chronic apical abscess on the supernumerary tooth was instrumented chemo-mechanically, root canal filling was performed and an anterior composite resin restoration was placed. The patient was evaluated for one year after root canal therapy. The tooth was asymptomatic, not exhibiting any pathological root resorption or alveolar resorption, and the anterior composite restoration was intact. Instead of extracting the supernumerary tooth, the application of endodontic, periodontal, and restorative procedures proved to be an alternative treatment.

Reliability of horizontal and vertical tube shift techniques in the localisation of supernumerary teeth.

PubMed

Mallineni, S K; Anthonappa, R P; King, N M

2016-12-01

To assess the reliability of the vertical tube shift technique (VTST) and horizontal tube shift technique (HTST) for the localisation of unerupted supernumerary teeth (ST) in the anterior region of the maxilla. A convenience sample of 83 patients who attended a major teaching hospital because of unerupted ST was selected. Only non-syndromic patients with ST and who had complete clinical and radiographic and surgical records were included in the study. Ten examiners independently rated the paired set of radiographs for each technique. Chi-square test, paired t test and kappa statistics were employed to assess the intra- and inter-examiner reliability. Paired sets of 1660 radiographs (830 pairs for each technique) were available for the analysis. The overall sensitivity for VTST and HTST was 80.6 and 72.1% respectively, with slight inter-examiner and good intra-examiner reliability. Statistically significant differences were evident between the two localisation techniques (p < 0.05). Localisation of unerupted ST using VTST was more successful than HTST in the anterior region of the maxilla.

The Effect of Er:YAG Laser on Entroccocus faecalis Bacterium in the Pulpectomy of Anterior Primary Teeth

PubMed Central

Bahrololoomi, Zahra; Poursina, Farkhondeh; Birang, Reza; Foroughi, Elnaz; Yousefshahi, Hazhir

2017-01-01

Introduction: Successful root canal therapy depends on the complete elimination of microorganisms such as Entroccocus faecalis, which is impossible to achieve with the traditional methods. Lasers are recently introduced as a new method to solve the problem. The present study is planned and performed to examining the antibacterial effect of Er: YAG laser. Methods: Sixty extracted anterior primary teeth were prepared and sterilized. E. faecalis bacterium was cultured in canals. Samples were randomly divided into two groups. The first group was disinfected by NaOCl 5/25% and Er: YAG laser and the second group just by NaOCl 5/25%. Samples of canal contents were cultured and colony counts were calculated. The results were analyzed statistically by SPSS software and Mann Whitney test. Results: There was no significant difference between colony counts in both groups (P=0.142). But the number of colonies in the first group was lower than in the second group. Conclusion: Although, Er: YAG laser cannot completely eliminate E. faecalis bacterium, its simultaneous use with NaOCl decreases E. faecalis. PMID:29071021

The Effect of Er:YAG Laser on Entroccocus faecalis Bacterium in the Pulpectomy of Anterior Primary Teeth.

PubMed

Bahrololoomi, Zahra; Poursina, Farkhondeh; Birang, Reza; Foroughi, Elnaz; Yousefshahi, Hazhir

2017-01-01

Introduction: Successful root canal therapy depends on the complete elimination of microorganisms such as Entroccocus faecalis , which is impossible to achieve with the traditional methods. Lasers are recently introduced as a new method to solve the problem. The present study is planned and performed to examining the antibacterial effect of Er: YAG laser. Methods: Sixty extracted anterior primary teeth were prepared and sterilized. E. faecalis bacterium was cultured in canals. Samples were randomly divided into two groups. The first group was disinfected by NaOCl 5/25% and Er: YAG laser and the second group just by NaOCl 5/25%. Samples of canal contents were cultured and colony counts were calculated. The results were analyzed statistically by SPSS software and Mann Whitney test. Results: There was no significant difference between colony counts in both groups ( P =0.142). But the number of colonies in the first group was lower than in the second group. Conclusion: Although, Er: YAG laser cannot completely eliminate E. faecalis bacterium, its simultaneous use with NaOCl decreases E. faecalis .

Relationship between head posture and dentofacial morphology in patients with TMJ osteoarthritis/osteoarthrosis.

PubMed

Ioi, Hideki; Matsumoto, Ryusuke; Nishioka, Masato; Goto, Tazuko K; Nakata, Shunsuke; Nakasima, Akihiko; Counts, Amy L

2008-01-01

To test whether there is a relationship between head and cervical posture and dentofacial morphology in patients with temporomandibular joint osteoarthritis/osteoarthrosis (OA). The subjects consisted of 34 Japanese females with TMJ OA (aged 24.7 +/- 6.1 years). Six craniocervical angular measurements were constructed for head posture. Two angular and 6 linear measurements were constructed for the skeletal relationship, while 1 angular and 6 linear measurements were constructed for the dental relationship. Pearson correlation coefficients were calculated between head posture and dentofacial variables. In the skeletal relationship, increased craniocervical angulations were significantly associated with a more posterior position of the maxilla, a decreased Frankfort to mandibular plane angle, decreased mandibular length, and a decreased lower facial height. In the dental relationship, increased craniocervical angulations were significantly associated with more posterior positions of the anterior teeth to the basal bone and decreased alveolar height of the anterior-posterior teeth. The hypothesis was rejected. These results suggest that an association may exist between head and cervical posture and dentofacial morphology in patients with TMJ OA.

Multidisciplinary approach to an asymmetric traumatic occlusion: a case report.

PubMed

Pinho, T; Coutinho-Alves, C; Neves, M

2013-01-01

The case of a 47-year-old female patient with an asymmetric traumatic occlusion, great alveolar destruction in the mandibular left central incisor, gingival recession with attachment loss and lack o fkeratinized tissue more accentuated in the crossbite teeth is described. This situation was caused by the traumatic position of the teeth, aggravated by a forced asymmetric anterior position of the mandible and aggravated by mandibular movements. After the extraction of the left central mandibular incisor, keratinized tissue reconstruction and alveolar bone regeneration were performed to obtain enough bone to move the adjacent teeth in this direction and allow the correct placement of an implant at the end of orthodontic treatment. The orthodontic treatment achieved general stable occlusal contacts and esthetic results that were finalized with a definitive prosthetic treatment. This interdisciplinary management was important to solve in the present case the seriously compromised function and esthetics that would never be achieved without this combination.

Effects of a non-rinse conditioner on the enamel of primary teeth.

PubMed

Fava, Marcelo; Myaki, Silvio Issáo; Arana-Chavez, Victor Elias; Fava-de-Moraes, Flavio

2003-01-01

The aim of this in vitro study was to evaluate by scanning electron microscopy the morphological aspects of the enamel of primary teeth after etching with 36% phosphoric acid or a non-rinse conditioner. Ten naturally exfoliated anterior primary teeth were selected. The samples were subjected to prophylaxis with pumice paste and water using a low-speed hand piece. Etching was done on the buccal surface. Specimens were divided into 2 groups: G1 (n=10): etching with 36% phosphoric acid gel - Conditioner 36 (Dentsply) for 20 s, followed by water rinse for 15 s; G2 (n=10): etching with NRC - Non Rinse Conditioner (Dentsply) for 20 s, followed by air drying for 15 s. The samples were dehydrated, mounted on metal stubs, coated with gold and observed with Jeol JSM-6100 scanning electron microscope. Electron-micrographic analysis showed that both etching agents were effective for etching the enamel of primary teeth causing the formation of microporosities on the enamel surface, although the etching pattern was more effective with the use of 36% phosphoric acid gel.

Evaluation of a dental floss containing soluble pyrophosphate on calculus formation using a short-term clinical model.

PubMed

Kleber, C J; Putt, M S; Milleman, J L; Harris, M

1998-01-01

This clinical study compared the effect of a dental floss containing 0.25 mg tetrasodium pyrophosphate per cm and a placebo floss on supragingival calculus formation using a 6-week, partial-mouth toothshield model. The six lower anterior teeth were scaled and polished before each 2-week period (i.e., pre-trial, washout, trial). During both the pre-trial and trial periods, subjects brushed twice daily with a non-tartar control dentifrice, while a toothshield protected the six test teeth from brushing. After rinsing with water and removing the shield, they flossed the test teeth. All subjects used placebo floss during the pre-trial period in order to determine the baseline Volpe-Manhold Index (VMI) calculus formation scores, which were used to balance groups for the trial period. During the trial period, one group used the placebo floss, while the second group used the pyrophosphate floss. The final results demonstrated that the pyrophosphate floss significantly inhibited calculus formation between teeth (mesial-distal scores) by 21%, and on labial surfaces by 37% relative to the placebo floss.

[Three-dimensional computer aided design for individualized post-and-core restoration].

PubMed

Gu, Xiao-yu; Wang, Ya-ping; Wang, Yong; Lü, Pei-jun

2009-10-01

To develop a method of three-dimensional computer aided design (CAD) of post-and-core restoration. Two plaster casts with extracted natural teeth were used in this study. The extracted teeth were prepared and scanned using tomography method to obtain three-dimensional digitalized models. According to the basic rules of post-and-core design, posts, cores and cavity surfaces of the teeth were designed using the tools for processing point clouds, curves and surfaces on the forward engineering software of Tanglong prosthodontic system. Then three-dimensional figures of the final restorations were corrected according to the configurations of anterior teeth, premolars and molars respectively. Computer aided design of 14 post-and-core restorations were finished, and good fitness between the restoration and the three-dimensional digital models were obtained. Appropriate retention forms and enough spaces for the full crown restorations can be obtained through this method. The CAD of three-dimensional figures of the post-and-core restorations can fulfill clinical requirements. Therefore they can be used in computer-aided manufacture (CAM) of post-and-core restorations.

Assessment of oxygen saturation in dental pulp of permanent teeth with periodontal disease.

PubMed

Giovanella, Larissa Bergesch; Barletta, Fernando Branco; Felippe, Wilson Tadeu; Bruno, Kely Firmino; de Alencar, Ana Helena Gonçalves; Estrela, Carlos

2014-12-01

In individuals with periodontal disease, dental pulp status should be determined before a treatment plan is made. Pulse oximeters are promising diagnostic tools to evaluate pulp vascularization. This study used pulse oximetry to determine the level of oxygen saturation in dental pulp of intact permanent teeth with periodontal attachment loss (PAL) and gingival recession (GR) and to evaluate the correlation between periodontal disease and level of oxygen saturation in the pulp. This study included 67 anterior teeth of 35 patients; all teeth showed intact crowns, PAL, a periodontal pocket (PP), and GR. The teeth underwent periodontal examination, cold and electric pulp testing, and pulse oximetry measurements. The Pearson correlation coefficient and a linear regression coefficient were calculated to evaluate the degree of correlation between periodontal disease markers (PAL, PP, and GR) and the level of oxygen saturation in dental pulp. These tests also evaluated possible associations between oxygen saturation and cold and electric pulp testing. PAL, PP, and GR had negative correlations with oxygen saturation in dental pulp. Conversely, no statistically significant association was found between oxygen saturation in dental pulp and the response to electric sensibility testing. Oxygen saturation was lower in the pulp of permanent teeth with PAL, PP, and GR, indicating that periodontal disease correlates with the level of oxygen saturation in the pulp. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

New method of laser doppler flowmetry signal processing in pulp vitality evaluation after teeth cosmetic treatment

NASA Astrophysics Data System (ADS)

Todea, Carmen; Sarpe, Amalia; Vitez, Bogdan; Draganescu, Gheorghe

2014-01-01

The present study aims to assess the pulp vitality before and after different tooth bleaching procedures, in order to determine the changes in pulpal microcirculation and whether they are reversible or not. Twelve volunteers were included in this study. For each volunteer, the pulpal blood flow of maxillary teeth was assessed prior to treatment using Laser Doppler Flowmetry. The "in office" bleaching technique was used 6 anterior teeth, with two different gels, a conventional one chemically activated (Group I 3teeth) and another one activated using Nd:YAG laser (Group II-3 teeth). The bleaching agents were applied on counterpart teeth and, after obtaining a esthetic results for each tooth, the pulpal blood flow was assessed using Laser Doppler Flowmetry immediately after treatment and then after one day and one week. All data were collected and statistically analyzed. Immediately after treatment, the assessment showed an increase of pulpal blood flow, for both study groups, but higher in Group I as compared to Group II (p<0.005). The subsequent assessments showed a reduction of the pulpal blood flow with non - significant differences between the study groups (p<0.005).The results suggest that the tooth bleaching procedurere presents a safe treatment method, which does not lead to irreversible damage to the dental pulp, when used correctly.

Amelogenesis imperfecta associated with dental follicular-like hamartomas and generalised gingival enlargement.

PubMed

O'Connell, S; Davies, J; Smallridge, J; Vaidyanathan, M

2014-10-01

Amelogenesis imperfecta (AI) is an inherited disorder characterised by generalised defects of dental enamel, but has been associated with other dental and medical conditions. It affects the appearance and structure of teeth, both in the primary and secondary dentition. AI in the presence of dental follicular hamartomas and gingival hyperplasia is rare and the management presents several challenges to the clinician. This article describes a case of a girl who presented to the paediatric department at the age of 7 years complaining of discomfort when eating and that she was unhappy with the appearance of her anterior teeth. The patient was born in the UK but she and her family were African and of Kenyan origin. She was otherwise fit and well. Investigations included clinical, radiographic and pathological examination as well as cone beam computed tomography imaging and X-ray Microtomography of extracted primary teeth. A diagnosis of AI in the presence of dental follicular hamartomas and generalised gingival hyperplasia was made, which had resulted in the delayed eruption of permanent teeth and an associated anterior open bite. There was no family history of dental defects. Initial treatment included preventative advice and the application of preformed metal crowns on all primary molars. Extraction of all remaining primary incisors was carried out followed by gingivectomy around the maxillary permanent incisors, mandibular central incisors and maxillary left second primary molar. Composite resin reconstruction of all permanent incisors and mandibular primary canines was complicated by the poor quality of enamel. Orthodontic extrusion of the anterior incisors was carried out to improve surface area for bonding with some success. A multidisciplinary team managed this case and decided that no surgical intervention of the dental follicular hamartomas was warranted. The patient coped well with treatment and attended for regular review over an 8-year period. She was reviewed at 6 monthly intervals clinically by a paediatric dentist and radiographs were taken as required to monitor the hamartomas, maintain the restorations and monitor her dental development. She was also seen on the multidisciplinary clinic once a year. This is the first case of its kind to be reported in the UK and the 8th worldwide. While this condition is rare, it is important that paediatric dentists are made aware of it.

Comparison of interpupillary distance and combined mesiodistal width of maxillary central incisor teeth in two ethnic groups of Northeast India: An in vivo study.

PubMed

Barman, Jogeswar; Serin, Sangma

2018-01-01

Anthropometric measurements of the face can be used as a guide in selecting proper sized anterior teeth. The aim of this study is to evaluate the relationship between the interpupillary distance (IPD) and the combined mesiodistal width of maxillary central incisors (MDW of MCIs) to establish their morphometric criterion and their significance in two ethnic groups of Northeast India. A total of 120 participants consisting of 60 indigenous students each from Assam and Meghalaya in the age group of 18-25 years were selected after taking their written consent. Standardized facial frontal photographs of all the participants were taken using a digital camera in such a manner that maxillary anterior teeth were visible. The photographs were uploaded onto the computer and saved in a file. Anthropometric measurements of IPD and combined MDW of MCIs in centimeters were made using both Adobe Photoshop ® 7.0 software program and manually using a digital vernier caliper on the developed photographs to a same size of 15 cm × 10 cm. Data obtained were tabulated and analyzed using Student "t"-test and Pearson correlation test. The present study reveals a positive correlation with a high degree of statistical significance between IPD and combined mesiodistal width of maxillary central incisors among all the samples irrespective of gender and ethnicity where P < 0.01. IPD can be used as a guide in determining the suitable mesiodistal dimension of the maxillary central incisors.

Replacement of a first molar and 3 second molars by the mesial inclination of 4 impacted third molars in an adult with a Class II Division 1 malocclusion.

PubMed

Tomonari, Hiroshi; Yagi, Takakazu; Kuninori, Takaharu; Ikemori, Takahiro; Miyawaki, Shouichi

2015-06-01

This case report presents the successful replacement of 1 first molar and 3 second molars by the mesial inclination of 4 impacted third molars. A woman, 23 years 6 months old, had a chief complaint of crowding of her anterior teeth and linguoclination of a second molar on the left side. The panoramic radiographic images showed that the maxillary and mandibular third molars on both sides were impacted. Root resorption on the distal surfaces of the maxillary second molars was suspected. The patient was given a diagnosis of Angle Class II Division 1 malocclusion with severe crowding of the anterior teeth and 4 impacted third molars. After we extracted the treated maxillary second premolars and the second molars on both sides, the treated mandibular second premolar and the second molar on the left side, and the root canal-filled mandibular first molar on the right side, the 4 impacted third molars were uprighted and formed part of the posterior functional occlusion. The total active treatment period was 39 months. The maxillary and mandibular third molars on both sides successfully replaced the first and second molars. The replacement of a damaged molar by an impacted third molar is a useful treatment option for using sound teeth. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Division of labor by sex and age in Neandertals: an approach through the study of activity-related dental wear.

PubMed

Estalrrich, Almudena; Rosas, Antonio

2015-03-01

The analysis of activity-related dental wear patterns in prehistoric anatomically modern humans and modern hunter-gatherers has shown sex differences attributable to a gendered division of labor. Neandertals are known to have extensive anterior dental wear related to the use of their front teeth as a tool. In this study we analyze the i) cultural striations (scratches on the labial surface of the anterior teeth with a cut-mark morphology), and ii) dental chipping (ante-mortem microfracture involving enamel or both enamel and dentine) in 19 Neandertal individuals from the l'Hortus (France), Spy (Belgium), and El Sidrón (Spain) sites, and compare the characteristics of those traits with the age and sex estimation for the individuals and among samples. The study reveals that all individuals have cultural striations, but those detected on the adult females are longer than the striations found in adult males. Regarding the distribution of dental chipping, the prevalence of this trait is higher in the maxillary dentition of males whereas females have the majority of dental chipping on their mandibular teeth. The differences detected on the overall activity-related dental wear pattern denote a difference or a division of labor by age and sex in Neandertals while using the mouth as a third hand, i.e., in activities other than the provisioning of food, and provide new evidence for the lifestyle of this Pleistocene fossil human species. Copyright © 2014 Elsevier Ltd. All rights reserved.

Multiple tooth anomalies in a nonsyndromic patient with class II division 2 malocclusions: A case report and a literature review.

PubMed

Isman, E; Isman, O; Aktan, A M; Ciftci, E; Topcuoglu, T

2015-01-01

Reports in the literature about the craniofacial characteristics of patients with class II division 2 malocclusions show a lot of different patterns accompanied by palatally displaced upper incisors, congenital missing teeth, polydiastema, fusion, germination, tooth impaction, peg-shaped lateral incisors, persistent teeth, hypodontia, persistent deciduous teeth, transpositions, and supernumerary teeth. The following case report focuses on the description of the clinical characteristics observed on a patient with a very unusual conjunction of dental and skeletal anomalies mentioned above, as well as a literature review on the related issues. Extra-intra-oral examinations, radiographic evaluations, orthodontic consultation, and reviewing the literature concluded that this nonsyndromic patient that refused to receive all dental treatment approaches is special with its uniqueness.

Middle Pleistocene Hominin Teeth from Longtan Cave, Hexian, China

PubMed Central

Xing, Song; Martinón-Torres, María; Bermúdez de Castro, José María; Zhang, Yingqi; Fan, Xiaoxiao; Zheng, Longting; Huang, Wanbo; Liu, Wu

2014-01-01

Excavations at the Longtan Cave, Hexian, Anhui Province of Eastern China, have yielded several hominin fossils including crania, mandibular fragments, and teeth currently dated to 412±25 ka. While previous studies have focused on the cranial remains, there are no detailed analyses of the dental evidence. In this study, we provide metric and morphological descriptions and comparisons of ten teeth recovered from Hexian, including microcomputed tomography analyses. Our results indicate that the Hexian teeth are metrically and morphologically primitive and overlap with H. ergaster and East Asian Early and mid-Middle Pleistocene hominins in their large dimensions and occlusal complexities. However, the Hexian teeth differ from H. ergaster in features such as conspicuous vertical grooves on the labial/buccal surfaces of the central incisor and the upper premolar, the crown outline shapes of upper and lower molars and the numbers, shapes, and divergences of the roots. Despite their close geological ages, the Hexian teeth are also more primitive than Zhoukoudian specimens, and resemble Sangiran Early Pleistocene teeth. In addition, no typical Neanderthal features have been identified in the Hexian sample. Our study highlights the metrical and morphological primitive status of the Hexian sample in comparison to contemporaneous or even earlier populations of Asia. Based on this finding, we suggest that the primitive-derived gradients of the Asian hominins cannot be satisfactorily fitted along a chronological sequence, suggesting complex evolutionary scenarios with the coexistence and/or survival of different lineages in Eurasia. Hexian could represent the persistence in time of a H. erectus group that would have retained primitive features that were lost in other Asian populations such as Zhoukoudian or Panxian Dadong. Our study expands the metrical and morphological variations known for the East Asian hominins before the mid-Middle Pleistocene and warns about the possibility that the Asian hominin variability may have been taxonomically oversimplified. PMID:25551383

[Combined surgical-orthodontic therapy for compound odontoma].

PubMed

Dukić, Walter; Kuna, Tihomir; Lapter-Varga, Marina; Jurić, Hrvoje; Lulić-Dukić, Olga

2007-09-01

Odontogenic tumor is a rare condition in dental medicine that mostly proceeds unrecognized until the occurrence of clinical symptoms such as delayed eruption, or is incidentally detected on routine x-ray examination. The exact cause is not known, however, previous dental trauma and infection have been postulated as the potential factors in the development of odontogenic tumor. The earliest possible operative extirpation of the tumorous growth is recommended to eliminate permanent tooth impaction and to enable normal growth of the teeth. In some cases, corticotomy, including complete removal of the bony coat of the tooth, may be needed to additionally facilitate and precipitate its eruption. Orthodontic therapy is also of great importance in correct alignment of the teeth 'n the dental arch as well as in the management of other anomalies that may be associated with odontogenic tumor. A patient with compound odontoma is presented, along with the course of combined surgical-orthodontic therapy. The patient reported previous intrusion trauma that had occurred at the age of 4 years, which may have been the potential factor in the development of odontoma. In this case, there was a massive odontogenic tumor which had compromised the growth of permanent teeth, and the growth impulse was almost at the end since the patient was 11 years old and the apexes of the upper incisors were partially closed. The first operation included complete removal of the tumorous mass that had interrupted spontaneous eruption of the upper permanent incisors. It did not result in immediate spontaneous tooth eruption, so an additional operation was needed. The objective of the second operative procedure was complete removal of the covering bone over the unerupted upper permanent incisors in order to eliminate the physical barrier to tooth growth and eruption. The objective of fixed orthodontic therapy was full eruption of the partially erupted upper incisors. After 16 months, the upper incisors were regularly located in the dental arch. In this case, orthodontic therapy had another objective, i.e. to ensure rotation of the first upper premolar, to provide space for the upper permanent canine eruption and to establish regular intercuspidation after upper second premolar hypodontia. In colclusion, combined operative and orthodontic therapy can be recommended irrespective of the stage of the impacted tooth development because any treatment to precipitate tooth eruption has favorable effects. Impacted teeth should always be provided all treatment options for faster eruption, as demonstrated in our case where a good clinical result was achieved within 2.5 years. The role of regular clinical and x-ray controls for assessment of the impacted tooth eruption should also be emphasized.

A "reverse direction" technique of single-port left upper pulmonary resection.

PubMed

Zhang, Min; Sihoe, Alan D L; Du, Ming

2016-08-01

Single-port video-assisted thoracoscopic surgery (VATS) left upper lobectomy is difficult amongst all the lobes. At the beginning of single-port lobectomies, the upper lobes were believed not to be amenable for single-port approach due to the difficult angulation for staplers. Gonzalez reported the first single-port VATS left upper lobectomy in 2011. We report a new technique of single-port VATS left upper lobectomy with the concept of "reverse direction". We divide the apical-anterior arterial trunk with upper vein in the last. The procedure sequence is described as follows: posterior artery, lingular artery, bronchus and finally upper vein & apical-anterior arterial trunk. This method could overcome the angular limitations frequently encountered in single-port VATS procedures; reduce the risk of injuries to pulmonary artery; broaden the indications of single-port the upper lobe of the left lung (LUL) to include hypoplastic lung fissures. Limitations of this new practice include the enlargement or severe calcifications of hilar and bronchial lymph nodes. A "reverse direction" technique of single-port left upper pulmonary resection is feasible and safe.

The chronology and sequence of eruption of human permanent teeth in Northern Ireland.

PubMed

Kochhar, R; Richardson, A

1998-12-01

To ascertain the average and range of ages and sequence of eruption of human permanent teeth, taking into account the effect of premature loss of primary antecedents. Longitudinal study. Caucasian subjects in Northern Ireland. Study casts at 6-monthly intervals from age 5 to 15 years of 276 children (146 males and 130 females) enrolled in the Belfast Growth Study. The mean and range of ages of eruption of each individual tooth were computed. Comparisons were made between the mean ages of eruption with and without premature loss of primary antecedents, between upper and lower arches, between right and left sides and between males and females. The sequence of eruption was also investigated. The means and ranges of eruption ages are reported. Premature loss of primary antecedents delayed eruption of permanent successors except for the upper premolars which were accelerated. The differences relating to the upper first premolar and lower canine were not statistically significant. Each lower tooth erupted before its upper counterpart except for the premolars. There was no significant difference in age of eruption between right and left sides. Females tended to erupt teeth before males with the exception of the second molars in both arches; however, the only differences to reach statistical significance related to upper and lower canines and upper lateral incisors. The most frequent orders of eruption were unique to the subject. These occurred in 22% of upper and 33% of lower arches. The classic sequences: first molar-central incisor-lateral incisor-first premolar-canine-second premolar-second molar (M1-I1-I2-PM1-C-PM2-M2) in the upper arch and I1-M1-I2-C-PM1-PM2-M2 in the lower arch occurred in only 16% of upper arches and 13% of lower arches. Males adhered to the textbook sequence (20% upper, 17% lower) more than females (12% upper, 8% lower). In the upper arch of females, the order M1-I1-I2-PM1-PM2-C-M2 in 10% of subjects was almost as frequent as the classic sequence. The ages, ranges and orders of eruption found in this study are more reliable than many which are frequently quoted on account of its longitudinal nature and the fact that the effect of premature loss of primary antecedents is taken into account. The exclusively Caucasian sample makes the data quite precise but limits applicability to patients of this ethnic origin.

Prevalence of periradicular periodontitis in a Scottish subpopulation found on CBCT images.

PubMed

Dutta, A; Smith-Jack, F; Saunders, W P

2014-09-01

To investigate the prevalence of periradicular periodontitis (PRP) using cone-beam computed tomography (CBCT) scans in a retrospective cross-sectional epidemiological study in a Scottish subpopulation. Of the 319 CBCT scans performed at Dundee Dental Hospital between November 2009 and July 2012, 245 dentate scans of patients over 18 years of age were included and 3595 teeth examined. Odds ratios were calculated, and the association between root filling and posts with PRP was determined. Radiological signs of PRP were detected in 209 teeth (5.8%) in 96 patients (male = 53, female = 43) of which 145 (69.4%) were measurable and 64 (30.6%) appeared as periapical widening. Most lesions were seen in the 46-55-year age group and in maxillary anterior teeth (35.4%); 47.4% (n = 81) of the total root filled teeth (n = 171) had PRP. Of the root filled teeth with lesions, approximately half (50.6%) had an inadequate root filling. Teeth with crowns, but not root filled, accounted for 17.7% of PRP. Periapical changes were detected on a high proportion of teeth with post-retained crowns (70.7%). The presence of a root filling was significantly associated with PRP (z = 17.689 P < 0.0001; odds ratio 16.36 < 23.17 < 32.83, 95% CI) and the presence of a post (z = 10.901 P < 0.0001; odds ratio 21.36 < 41.8021 < 81.78, 95% CI). The prevalence of PRP in a Scottish subpopulation was 5.8%. The presence of a root filling or a post-retained crown was significantly associated with the presence of PRP as determined by CBCT scans. The prevalence of periradicular disease in root filled teeth remains high in the Scottish population. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Fracture resistance of simulated immature teeth filled with Biodentine and white mineral trioxide aggregate - an in vitro study.

PubMed

Elnaghy, Amr M; Elsaka, Shaymaa E

2016-04-01

The purpose of this study was to evaluate the long-term fracture resistance of simulated immature teeth filled with Biodentine (BD) and white mineral trioxide aggregate (WMTA) as pulp space barriers for regenerative endodontic procedures (REPs). Sixty extracted human maxillary anterior teeth were divided into four groups of 15 teeth each. Positive control teeth received no treatment. The remaining teeth were prepared until a size 6 Peeso (1.7 mm) could be passed 1 mm beyond the apex. Then, an engineering twist drill of 3 mm diameter was used to extend the preparation of the canal 3 mm below CEJ. The root canals were irrigated and disinfected according to AAE considerations for REPs. The canals were filled with either BD or WMTA. The negative control canals were left unfilled. The coronal access cavities were restored with glass ionomer followed by composite resin. The teeth were placed in phosphate-buffered saline solution and stored for 12 months. Each specimen was then subjected to fracture testing using a universal testing machine. The peak load to fracture and the fracture resistance were recorded, and the data were analysed statistically. The positive control group had the highest fracture resistance and differed significantly (P < 0.05) from the other experimental groups. No significant difference was found between BD and WMTA (P > 0.05). Considering the risk of cervical root fracture for pulpless infected immature teeth treated with REPs, after 12 months, there was no difference between WMTA and BD regarding the resistance to root fracture. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

A Rare Occurrence of Geminated-Taloned Maxillary Lateral Incisor

PubMed Central

Kayal, Vizhi G

2012-01-01

ABSTRACT The talon cusp is a developmental anomaly characterized by the presence of an accessory cusp like structure projecting from the cingulum area of the anterior teeth. Gemination is an anomaly caused by a single tooth germ that attempted to divide during its development. These developmental anomalies may cause clinical problems including esthetic impairment, pain, caries and tooth crowding. Co-occurrence of two anomalies in a teeth is rare. This paper presents an unusual case of talon cusp on geminated permanent lateral incisor. How to cite this article: Neeraja R, Kayal VG. A Rare Occurrence of Geminated-Taloned Maxillary Lateral Incisor. Int J Clin Pediatr Dent 2012;5(2):136-138. PMID:25206153

Management of unerupted maxillary deciduous central incisor: a case report.

PubMed

Shakra, Karam Abu

2014-01-01

Failure of eruption of primary teeth can be considered rare, especially in maxillary anterior teeth. The problem can be either mechanical obstruction of eruption or a failure of the eruption mechanism. This case report presents failure of eruption of the maxillary right deciduous central incisor in a 4-year-old girl. The unerupted primary tooth was removed surgically. The histological finding revealed fibroma with reactive giant cells. Periodic follow-up visits were advised to monitor the developing dentition and to ensure enough space for the permanent incisor. How to cite this article: Shakra KA. Management of Unerupted Maxillary Deciduous Central Incisor: A Case Report. Int J Clin Pediatr Dent 2014;7(1):58-60.

Gunshot Injury to the Anterior Arch of Atlas

PubMed Central

Park, Jun Hee; Kim, Hyeung Sun; Do, Nam Yong

2012-01-01

Penetrating injuries to the upper cervical spine resulting from gunshots are rare in South Korea due to restrictions of gun use. Moreover, gunshot wounds to the upper cervical spine without neurological deficits occur infrequently because of the anatomic location and surrounding essential structures. We present an uncommon case involving the surgical removal of a bullet located in the anterior arch of first cervical vertebra (C1) via a transoral approach without neurological complications or subsequent mechanical instability. PMID:22639715

3D variations in human crown dentin tubule orientation: a phase-contrast microtomography study.

PubMed

Zaslansky, Paul; Zabler, Simon; Fratzl, Peter

2010-01-01

Tubules dominate the microstructure of dentin, and in crowns of human teeth they are surrounded by thick mineralized peritubular cuffs of high stiffness. Here we examine the three-dimensional (3D) arrangement of tubules in relation to enamel on the buccal and lingual aspects of intact premolars and molars. Specifically we investigate the angular orientation of tubules relative to the plane of the junction of dentin with enamel (DEJ) by means of wet, non-destructive and high-resolution phase-contrast (coherent) tomography. Enamel capped dentin samples (n=16), cut from the buccal and lingual surfaces of upper and lower premolar and molar teeth, were imaged in water by high-resolution synchrotron-based phase-contrast X-ray radiography. Reconstructed 3D virtual images were co-aligned with respect to the DEJ plane. The average tubule orientation was determined at increasing distances from the DEJ, based on integrated projections onto orthogonal virtual planes. The angle and curl of the tubules were determined every 100 microm to a depth of 1.4mm beneath the DEJ. Most tubules do not extend at right angles from the DEJ. Even when they do, tubules always change their orientations substantially within the first half-millimeter zone beneath the DEJ, both on the buccal and lingual aspects of premolar and molar teeth. Tubules also tend to curl and twist within this zone. Student t-tests indicate that lower teeth seem to have greater tilts in the tubule orientations relative to the DEJ normal with an average angle of 42 degrees (+/-2.0 degrees), whereas upper teeth exhibit a smaller change of orientation, with an average of 32 degrees (+/-2.1 degrees). Tubules are a central characteristic of dentin, with important implications on how it is arranged and what the properties are. Knowing about the path that tubules follow is important for various reasons, ranging form improving control over restorative procedures to understanding or simulating the mechanical properties of teeth. At increasing depths of dentin beneath enamel, tubules are significantly tilted relative to the DEJ norm, which may be important to understand clinical challenges such as sensitivity, effectiveness of bonding techniques or prediction of possible paths for bacterial invasion. Our data show dissimilar average tubule angles of upper versus lower teeth with respect to the DEJ which presumably contributes to different shear responses of the tissue under function. The degree to which this may warrant improved restoratives or new adhesive techniques to enhance adhesive restorations merits further investigation.

Treatment of Mature Permanent Teeth with Necrotic Pulps and Apical Periodontitis Using Regenerative Endodontic Procedures: A Case Series.

PubMed

Saoud, Tarek Mohamed; Martin, Gabriela; Chen, Yea-Huey M; Chen, Kuang-Liang; Chen, Chao-An; Songtrakul, Kamolthip; Malek, Matthew; Sigurdsson, Asgeir; Lin, Louis M

2016-01-01

Regenerative endodontic procedures (REPs) are usually used to treat human immature permanent teeth with necrotic pulps and/or apical periodontitis. Successful REPs result in the elimination of clinical signs/symptoms, the resolution of apical periodontitis, and, in some cases, thickening of the canal walls and/or continued root development with or without apical closure. REPs can restore the vitality of tissue in the canals of immature permanent teeth previously destroyed by infection or trauma. Vital tissue is inherited with immune defense mechanisms to protect itself from foreign invaders. Recently, REPs have also been used to successfully treat human mature permanent teeth with necrotic pulps and apical periodontitis. The purpose of this case series was to present the potential of using REPs for mature permanent teeth with necrotic pulps and apical periodontitis. This case series consisted of 6 patients, 4 females and 2 males. The patients' ages ranged from 8-21 years old. Seven permanent teeth, 4 anterior and 3 molar teeth, with necrotic pulps and apical periodontitis were treated using REP. Radiographically, the root development of all teeth was almost completed except the apices of 2 molars, which showed slightly open. Complete chemomechanical debridement of the canals of the teeth was performed, and the canals were dressed with Metapaste (Meta Biomed Co, Ltd, Chungbuk, Korea) during treatment visits. Periapical bleeding into the canals was induced at the last treatment visit by placing a hand #20 or #25 K-file with the tip slightly bent through the apical foramina into the periapical tissues. A 3-mm thickness of mineral trioxide aggregate was placed into the coronal canals over semicoagulated blood. The access cavities were restored with either composite resin or amalgam. Follow-ups of the 7 teeth ranged from 8 to 26 months. The periapical lesions of 2 teeth were considered healed, and 5 teeth revealed healing. Clinical signs/symptoms were absent in all teeth at follow-up visits at different time points. None of the treated teeth responded to cold and electric pulp tests. This case series shows the potential of using REPs for mature teeth with necrotic pulp and apical periodontitis. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Single-Tooth Osteotomy Combined Wide Linear Corticotomy Under Local Anesthesia for Correcting Anterior Protrusion With Ectopically Erupted Canine.

PubMed

Iskenderoglu, Nur Serife; Choi, Byung-Joon; Seo, Kyung Won; Lee, Yeon-Ji; Lee, Baek-Soo; Kim, Seong-Hun

2017-01-01

This article presents the alternative surgical treatments of both anterior protrusion by carrying out retraction on mandibular anterior fragment, meanwhile applying retraction force on maxilla anterior teeth and ectopically erupted canine with using platelet-rich fibrin (PRF). Anterior segmental osteotomy was combined with linear corticotomy under local anesthesia. The correction of right ectopic canine was achieved through 2 stages. First, dento-osseous osteotomy on palatal side was performed. Then second osteotomy with immediate manual repositioning of the canine with concomitant first premolar extraction was enhanced with PRF, which was prepared by centrifuging patient's blood, applied into buccal side of high canine during osteotomy. Mandibular retraction was accomplished by anterior segmental osteotomy. Single-tooth osteotomy is a more effective surgical method for ankylosed or ectopically erupted tooth in orthodontic treatment. It can reduce the total orthodontic treatment time and root resorption, 1 common complication. Significant improved bone formation was seen with the addition of PRF on noncritical size defects in the animal model. It is reasonable to think that PRF can promote bone regeneration. So early bone formation also can reduce the complication such as postoperative infection. As an alternative to anterior protrusion and ectopically erupted canine treatment, segmental osteotomy and corticotomy combined platelet-rich plasma can enhance orthodontic treatment outcome.

Age estimation based on pulp/tooth volume ratio measured on cone-beam CT images.

PubMed

Gulsahi, Ayse; Kulah, Cemal Kivanc; Bakirarar, Batuhan; Gulen, Orhan; Kamburoglu, Kivanc

2018-01-01

After tooth eruption, the size of the pulp cavity decreases with age owing to deposition of secondary dentine. The aim of this study was to investigate the relation between the chronological age and the ratio of pulp volume (PV) to tooth volume (TV) measurements using CBCT images of single rooted teeth. Maxillary anterior, canine and mandibular canine/premolar CBCT scans of patients older than 15 years of age were collected from the archives between 2013 and 2015 years. Patients with CBCT scans of teeth were seen in detail and patients with known chronological age were included. Teeth with caries, filling or crown restorations, periapical pathologies or pulps that could not be identified were excluded. Consequently, 204 patients with 655 teeth were evaluated. The PV and the TV of each tooth was measured and then the PV/TV ratio was calculated. Simple linear regression analysis was performed in order to predict age estimation by using PV/TV. The PV/TV of all teeth ranged between 0.01 and 0.08. A negative correlation was found between the PV/TV ratio and age (p < 0.05). The regression analysis showed the highest Pearson correlation (0.532) for the maxillary central incisor tooth. Considering measurements of the PV/TV of all assessed teeth, there was no significant difference in the intercept between both gender (p > 0.05). This study revealed that PV/TV ratio was not gender dependent and the strongest correlation was found between the age and PV/TV ratio measured on maxillary central incisors than other teeth.

Three-unit bridge construction in anterior single-pontic areas using a metal-free restorative.

PubMed

Narcisi, E M

1999-02-01

A new glass-ceramic material, IPS Empress 2, is revolutionizing esthetic restorative dentistry by allowing metal-free, three-unit bridge construction in anterior and premolar single-pontic areas. The case discussed in this article illustrates the material's application in the dual-arch restoration of a young woman with congenitally missing teeth. The material was used as an alternative to single-tooth implant restorations to place two maxillary three-unit bridges, one mandibular three-unit bridge, and two mandibular porcelain veneers. IPS Empress 2 provides an esthetic alternative to porcelain-fused-to-metal restorations by facilitating attractive, functional tooth restoration.

How well can fishes prey on zebra mussels in eastern North America?

USGS Publications Warehouse

French, John R. P.

1993-01-01

Literature on mollusk-eating fishes was reviewed to determine the potential for different species of fish to control zebra mussels in eastern North America. At least six species are potential predators of zebra mussels because they possess (1) both upper and lower pharyngeal teeth or (2) lower pharyngeal teeth and chewing pads located on the dorsal roof for crushing mollusk shells. Freshwater drum (Aplodinotus grunniens) and two centrarchids, redear sunfish (Lepomis microlophus) and pumpkinseed (L. gibbosus), possess both upper and lower pharyngeal teeth and are likely to consume more zebra mussels than fishes with only lower pharyngeal teeth. Only two catostomid species, copper and river redhorses (Moxostoma hubbsi and M. carinatum), have chewing pads that enable them to crush mollusks. The exotic omnivorous common carp (Cyprinus carpio), possessing lower teeth and a chewing pad, may prey on zebra mussels when aquatic insect larvae, its preferred food, become rare. Managing populations of drum, sunfishes and redhorses to reduce exploitation of large individuals and improve their habitats are suggested as means to intensify biological control of zebra mussels in eastern North America. Other Eurasian molluscivores, the roach (Rutilus rutilus) and the black carp (Mylopharyngodon piceus) should not be introduced into North America because research has shown repeatedly that an introduced biological controller usually does not forage for unwanted pests or reside only in preferred habitats of pests. Drum, sunfishes and redhorses should be preferred over these exotics as biological controllers of zebra mussels in North America because these native fishes will likely occupy newly established habitats of zebra mussels.

An improved interim therapeutic restoration technique for management of anterior early childhood caries: report of two cases.

PubMed

Nelson, Travis

2013-01-01

Early childhood caries presents unique treatment challenges that often require advanced behavior management techniques, such as general anesthesia or procedural sedation. In some cases, use of these pharmacologic adjuncts is undesirable or not possible. The interim therapeutic restoration is a treatment method that, while sometimes employed in such cases, can often produce unsatisfactory results in primary anterior teeth. This is often due to insufficient bulk of material and lack of retention. The purpose of this report was to describe a simple alternative technique (resin modified glass ionomer strip crowns) that may be employed to deliver esthetic anterior restorations to marginally cooperative children in the dental clinic setting and to report on two cases in which it was successfully used. \\\\\\Department of Pediatric Dentistry, University of Washington, Seattle, Wash., USA. tmnelson@uw.edu

Conservative Approach for the Esthetic Management of Multiple Interdental Spaces: A Systematic Approach.

PubMed

Báez Rosales, Abelardo; De Nordenflycht Carvacho, Diego; Schlieper Cacciutolo, Ramón; Gajardo Guineo, Manuel; Gandarillas Fuentes, Claudio

2015-01-01

To describe a conservative approach using resin-based composites following a buccolingual layering technique with a customized silicon index for the management of multiple diastemas. This clinical article describes the case of a patient with their anterior teeth esthetically compromised by multiple diastemas, incisal wear, and dull/low-value cervical composite resin restorations that were managed with nanofilled composite resin using the "buccolingual technique" with a customized silicon index made from a wax-up to build up the restorations. The first layer of composite placed lingually that represents the enamel replacement was placed directly on the silicon index so that it provides in one single step the lingual profile and the position of the incisal edge of the restoration. Then, dentine and effect composite resin can be applied in a precise three-dimensional configuration. To solve esthetic dental problems, as anterior diastemas, in a very conservative and even reversible way, the use of direct resin composites for layering is an excellent choice, but should be performed based on simple and reproducible techniques, as the buccolingual technique. The clinical technique described in this paper shows the advantages of a conservative approach to correct diastemas on maxillary anterior teeth. The application of these techniques can not only help achieve optimal esthetics, but also avoid the removal of extensive dental hard tissue and achieve a predictable final result, especially in esthetically demanding cases. © 2015 Wiley Periodicals, Inc.

Stress shielding and fatigue limits of poly-ether-ether-ketone dental implants.

PubMed

Lee, Woo-Taek; Koak, Jai-Young; Lim, Young-Jun; Kim, Seong-Kyun; Kwon, Ho-Beom; Kim, Myung-Joo

2012-05-01

The poly-ether-ether-ketone (PEEK) polymer is of great interest as an alternative to titanium in orthopedics because of its biocompatibility and low elastic modulus. This study evaluated the fatigue limits of PEEK and the effects of the low elastic modulus PEEK in relation to existing dental implants. Compressive loading tests were performed with glass fiber-reinforced PEEK (GFR-PEEK), carbon fiber-reinforced PEEK (CFR-PEEK), and titanium rods. Among these tests, GFR-PEEK fatigue tests were performed according to ISO 14801. For the finite element analysis, three-dimensional models of dental implants and bone were constructed. The implants in the test groups were coated with a 0.5-mm thick and 5-mm long PEEK layer on the upper intrabony area. The strain energy densities (SED) were calculated, and the bone resorption was predicted. The fatigue limits of GFR-PEEK were 310 N and were higher than the static compressive strength of GFR-PEEK. The bone around PEEK-coated implants showed higher levels of SED than the bone in direct contact with the implants, and the wider diameter and stiffer implants showed lower levels of SED. The compressive strength of the GFR-PEEK and CFR-PEEK implants ranged within the bite force of the anterior and posterior dentitions, respectively, and the PEEK implants showed adequate fatigue limits for replacing the anterior teeth. Dental implants with PEEK coatings and PEEK implants may reduce stress shielding effects. Dental implant application of PEEK polymer-fatigue limit and stress shielding. Copyright © 2012 Wiley Periodicals, Inc.

Periodontal evaluation in patients undergoing maxillary expansion.

PubMed

Carmen, M; Marcella, P; Giuseppe, C; Roberto, A

2000-09-01

Maxillary transverse diameter expansion is a treatment various authors have claimed is related to the development of gingival recession on the teeth of the upper arch. The aim of the present study was to compare such an incidence in two different groups of patients: those treated with surgically assisted rapid maxillary expansion and orthopedic expansion, respectively. Both treatments achieved the goal of expanding the transverse dimension (5.3 and 4.4 mm, respectively), but a significant difference was shown by the chi 2 test for the incidence of gingival recession of premolar/molar upper teeth, more than double for the latter than for the former. Therefore, surgically assisted rapid maxillary expansion seems to be an orthodontically effective procedure, safer than the orthopedic treatment regarding the possible development of mucogingival problems.

Anatomic Variations of the Anterior Atlantodental Joint and Relations to the Apical and Alar Ligaments in a Geriatric Population.

PubMed

Rustagi, Tarush; Iwanaga, Joe; Sardi, Juan P; Alonso, Fernando; Oskouian, Rod J; Tubbs, R Shane

2017-11-01

Degenerative changes in the upper cervical spine may be age related degeneration or a pathological process such as rheumatoid arthritis. However, to our knowledge, the relationship between the apical and alar ligaments and these anomalies has not been discussed. We present anatomical variations of the anterior atlantodental joint observed during cadaveric dissection of adult craniovertebral junctions, the relationship with the alar and apical ligaments and discuss possible origins and clinical implications. The upper cervical spine including part of the occiput was dissected from cadavers whose mean age at death was 78.9 years-old. The anterior atlantodental joint and apical and alar ligaments were observed and any atypical findings were noted. In eleven specimens, seven had a dens corona, three had an os odontoideum and one had a dens aureola, which arose from the upper part of the anterior arch of the atlas. Only four specimens had an apical ligament. The possible etiologies and the clinical applications of these craniovertebral anomalies in a geriatric population should be appreciated by the clinician treating patients with disease in this area or interpreting imaging in the region. Copyright © 2017 Elsevier Inc. All rights reserved.

A modified method using a two-port approach for accessing the hilar vasculature without transferring an endostapler from camera port to utility port during thoracoscopic right upper lobectomy.

PubMed

Jiao, W; Zhao, Y; Xuan, Y; Wang, M

2015-02-01

For thoracoscopic upper lobectomies, most cutting endostaplers must be inserted through the camera port when using a two-port approach. Access to the hilar vasculature through only the utility port remains a challenge. In this study, we describe a procedure to access the hilar vasculature without transferring the endostapler site during a thoracoscopic right upper lobectomy. A 2.5-cm utility anterior incision was made in the fourth intercostal space. The posterior mediastinal visceral pleura were dissected to expose the posterior portion of the right upper bronchus and the anterior trunk of the right pulmonary artery. The pleura over the right hilar vasculature were then peeled with an electrocoagulation hook. The anterior trunk of the right pulmonary artery was then transected with a cutting endostapler through the utility port firstly. This crucial maneuver allowed the endostapler access to the right upper lobe pulmonary vein. The hilar structures were then easily handled in turn. This novel technique was performed successfully in 32 patients, with no perioperative deaths. The average operation time was 120.6 min (range 75-180 min). This novel technique permits effective control of the hilar vessels through the utility port, enabling simple, safe, quick and effective resection.

The Anterior Interosseus Artery Perforator Flap: Anatomical Dissections and Clinical Study.

PubMed

Panse, Nikhil S; Joshi, Sheetal B; Sahasrabudhe, Parag B; Bahetee, B; Gurude, Pradnya; Chandanwale, Ajay

2017-05-01

Reconstruction of upper extremity deformities continues to be a challenge to the reconstructive surgeon. Various loco regional, distant and free flaps are available for reconstruction. However, each has its own set of advantages and disadvantages. Of the commonly performed local flaps, radial artery forearm flap, and the posterior interosseus artery flap stand out prominently. Recently, perforator propeller flaps have been used for resurfacing the upper extremity. The anterior interosseus artery perforator flap is an uncommonly used and described flap. This study was divided into anatomical study and clinical application in a IV level of evidence. In the anatomical study, five upper extremities were studied. Clinically, 12 patients underwent reconstruction using the anterior interosseus artery perforator flap. Flaps were performed by a single surgeon. A retrospective review of these cases from November 2008 to May 2014 is presented. The anterior interosseus artery perforator was identified in four out of five cadaver limbs. The septocutaneous perforator was in the fifth extensor compartment around 4 cm proximal to the wrist joint. Of the twelve flaps, there was complete necrosis in one flap, and partial necrosis in one flap. The patient with complete necrosis underwent skin grafting at a later date. The wound healed secondarily in case of partial flap necrosis. Anterior interosseus artery perforator flap must be considered as an important reconstructive option in the armamentarium of the plastic surgeon, while managing hand and wrist defects.

[Clinical examination of children with tooth aplasia. Correlations between dental symptoms and the whole organism].

PubMed

Knolmayer, Judit; Bognár, Veronika; Szabó, Gyula

2008-10-01

The characteristic abnormalities of jaws, teeth, and salivation can be measured and expressed by numbers. The possible etiological factors, like the positive family history of noxas during the pregnancy can be explored. In our study we examined the symptoms of general organic system and teeth trait--jaw relation, seriousness of aplasia, abnormalities of teeth in size--defect of salivary glands and the presence of possible etiological factors. Thirty children were examined. The symptoms of general organic system were diagnosed. 60% of tooth agenesis occurs in the maxilla, the size of teeth reduced also in the upper jaw. Pseudoprogenia can be explained by these facts. The size reduction of extant teeth appeared stronger in the labiolingual direction. The salivary secretion rate in examined children proved significantly lower than in the control group. Seven siblings and eight parents were identified by examining the etiological factors. We did not find any noxas during the pregnancy by our questionnaire method.

Enameloid microstructure of the serrated cutting edges in certain fossil carcharhiniform and lamniform sharks.

PubMed

Andreev, Plamen S

2010-07-01

The triple-layered enameloid organization of neoselachian teeth has proven to be a reliable systematic character of the group. This study uses scanning electron microscopy to investigate the orientation of the parallel enameloid bundles in the area of the serrated cutting edges in certain fossil elasmobranchs. The examined teeth come from two Upper Cretaceous Squalicorax species and the Upper Miocene carcharhiniforms Galeocerdo sp., Carcharhinus sp., and Hemipristis serra. The parallel bundles are revealed by surface etching, which removes the superficial shiny-layered enameloid. In the teeth of Squalicorax, the bundles around the cutting edge bend once, before they reach the serrations. The studied carcharhiniform species show a more complicated pattern with a change of parallel bundle course inside the serrations. H. serra teeth do not display the first bending of the bundles, whereas it was present in the other two carcharhiniforms. The course of the crystalline bundles in both Squalicorax species is not affected by the presence of the serrations, regardless of the twofold difference in tooth size between them. In the carcharhiniform species, the bended bundles occur within the primary and secondary serrations and are always associated with them. This feature might have functional significance by strengthening the cutting edge or could simply develop as a consequence of the enameloid mineralization around the individual serrae. (c) 2009 Wiley-Liss, Inc.

Shear bond strength and enamel fracture behavior of ceramic brackets Fascination® and Fascination®2.

PubMed

Gittner, Robert; Müller-Hartwich, Ralf; Engel, Sylvia; Jost-Brinkmann, Paul-Georg

2012-01-01

The purpose of this study was to compare the shear bond strength and incidence of enamel fractures of the ceramic brackets Fascination® and Fascination®2. A total of 360 teeth (180 first upper bicuspids and 180 lower incisors) were stored in 96% ethanol, while 360 other teeth (180 first upper bicuspids and 180 lower incisors) were stored in 0.1% thymol. All 720 teeth were bonded one-half each with Fascination® and Fascination®2 brackets using three different adhesives and three different light curing units. The teeth were debonded with a debonding-device according to DIN EN ISO 10477 using a universal testing machine with a crosshead speed of 1 mm per minute. The enamel surface was then examined stereomicroscopically (10x and 40x magnification). The non-parametric Mann-Whitney U test was used, since the data were not normally distributed. The Fascination®2 brackets provided significantly lower shear bond strength than Fascination® brackets (p = 0.003). Fascination® brackets demonstrated significantly fewer, smaller enamel fractures than Fascination®2 brackets (p = 0.012). The lower shear bond strength of the Fascination®2 brackets is clinically acceptable, but our study's experimental design did not enable us to prove whether this is clinically associated with a lower risk of enamel fracture.

Sinus Headaches

MedlinePlus

... Achy feeling in your upper teeth Sinusitis or migraine? Migraines and headaches from sinusitis are easy to confuse ... types of headaches may overlap. Both sinusitis and migraine headache pain often gets worse when you bend ...

[Clinical study of the application of non-invasive porcelain veneer to improve the aesthetic effects in maxillary anterior area].

PubMed

Li, Jian-hui; DI, Ping; Hu, Xiu-lian; Qiu, Li-xin; Cui, Hong-yan; Lin, Ye

2010-02-18

To evaluate the clinical results of application of non-invasive porcelain veneer to reduce the black triangle of implant and adjacent teeth and to improve the aesthetic effect in the maxillary anterior area. The study included 10 patients (Male: 4, Female: 6; average age: 41.5) accessioned during May 2007 to August 2009 in Peking University School of Stomatology. The provisional restorations were delivery on implant after 3-6 months healing period of the implant. The non-invasive porcelain veneers were used in the round tip adjacent teeth with gingival recession in the indicated patients. Main measured parameters on the model included horizontal distance and vertical distance. The Horizontal distance refers to the black triangle bottom which is from adjacent surface of the natural teeth to the implant restoration at the gingival level. The vertical distance is from mid-point of the triangle bottom to the contact point. Clinical observed items included bleeding index (BI), integrity of porcelain veneer and degree of satisfaction of the patients. A total of 14 adjacent natural teeth in 10 patients were cemented with porcelain veneer. No porcelain veneer was lost or fracture during follow-up period (range 6 to 27 months, mean of 10.4 months). Mean bleeding index 0-1. The horizontal distance was reduced from (3.1 + or - 0.8) mm before restoration to (1.1 + or - 0.5) mm after restoration. Vertical distance from (5.3 + or - 1.1) mm to (2.9 + or - 0.7) mm. All patients were satisfied with the clinical result. The data and the experience described in this study indicate that improvement of aesthetic effects by using no-invasive porcelain veneer techniques can be a predictable technique for patients with periodontal disease. Further study is needed to determine the long-term result of the technique.

Impact of Nano Hydroxyapatite, Nano Silver Fluoride and Sodium Fluoride Varnish on Primary Teeth Enamel Remineralization: An In Vitro Study

PubMed Central

Nozari, Ali; Ajami, Shabnam; Rafiei, Azade

2017-01-01

Introduction Dental caries is still prevailing worldwide, although different anti caries products have been introduced. Each remineralizing agent has its own shortcomings. Therefore, looking for new agents to have benefits of previous ones with lesser side effects is worthwhile. Aim To determine the remineralization ability of NaF varnish, nano-Hydroxyapatite Serum (n-HAP) and Nano Silver Fluoride (NSF) on enamel of primary anterior teeth. Materials and Methods Incipient caries were induced in primary sound anterior teeth by storing each specimen in demineralization solution for 72 hours. Then they were randomly divided into four groups of 15 samples each: (1) NaF varnish; (2) n-HAP repairing serum; (3) NSF and (4) no treatment (control). Surface Microhardness (SMH) was assessed with Vickers micro hardness tester before and after demineralization and after 10 days of pH-cycling. A total of 12 random specimens from groups 1 to 4 (3 random samples of each group) were examined by Atomic Force Microscopy (AFM). The SMH values were analysed with one-way and repeated measures ANOVA. Level of significance was set at p=0.05. Results Post lesion SMH values significantly decreased in all groups (p<0.001). Post treatment SMH values significantly increased in comparison to post lesion ones (p<0.001) except for control group which was not different statistically (p=0.86). The highest SMH values were observed in NSF group (mean 222.90 ± 28.79). Statistically significant differences were shown between all groups (p<0.05). However, NaF varnish and n-HAP groups were not statistically different (p=0.165). AFM images demonstrated protective layers in all treated groups. Conclusion The results of this in vitro study suggest that NSF could have the greatest remineralization efficacy. NaF varnish and n-HAP serum were similar in remineralizing initial caries. Future clinical studies are recommended for selection of the most appropriate remineralizing agent in primary teeth. PMID:29207844

Dentin hypersensitivity after teeth bleaching with in-office systems. Randomized clinical trial.

PubMed

Martin, Javier; Fernandez, Eduardo; Bahamondes, Valeria; Werner, Andrea; Elphick, Klaus; Oliveira, Osmir Batista; Moncada, Gustavo

2013-02-01

To comparatively and prospectively compare in a randomized clinical trial, dentin hypersensitivity after treatment with three in-office bleaching systems, based on hydrogen peroxide at different concentrations, with and without light source activation. 88 individuals were included according to inclusion and exclusion criteria. Subjects were randomly divided into the following three treatment groups: Group 1 was treated with three 15-minute applications of hydrogen peroxide at 15% with titanium dioxide (Lase Peroxide Lite) that was light-activated (Light Plus Whitening Lase) with five cycles of 1 minute and 30 seconds each cycle, giving a total treatment time of 45 minutes; Group 2 was treated with three 10-minute applications of hydrogen peroxide at 35% (Lase Peroxide Sensy), activated by light (LPWL) same activation cycles than Group 1, with a total treatment time of 30 minutes; Group 3 was treated with only one application for 45 minutes of hydrogen peroxide at 35% (Whitegold Office) without light activation. Each subject underwent one session of bleaching on the anterior teeth according to the manufacturers' instructions. Dentin sensitivity was recorded with a visual analogue scale (VAS) at baseline, immediately after, and at 7 and 30 days after treatment using a stimulus of an evaporative blowing triple syringe for 3 seconds on the upper central incisors from a distance of 1 cm. A Kruskal-Wallis test followed by Mann-Whitney test was performed for statistical analysis. All groups showed increased sensitivity immediately after treatment. Group 1 displayed less changes relative to baseline with no significant differences (P = 0.104). At 7 and 30 days after treatment, a comparison of VAS values indicated no significant differences between all groups (P = 0.598 and 0.489, respectively).

Randomized controlled clinical trial on bleaching sensitivity and whitening efficacy of hydrogen peroxide versus combinations of hydrogen peroxide and ozone.

PubMed

Al-Omiri, Mahmoud K; Al Nazeh, Abdullah A; Kielbassa, Andrej M; Lynch, Edward

2018-02-05

The clinical efficacy regarding bleaching sensitivity and tooth shade lightening using a standard hydrogen peroxide (H 2 O 2 ) bleaching gel was compared with the additional use of ozone either before or after application of H 2 O 2 . Using computer-generated tables, 45 participants were randomly allocated into three groups (n = 15 each) in this investigator-driven, single-centre trial. In Group 1, upper anterior teeth were bleached using ozone (produced via a healOzone X4 device) for 60 seconds, then 38% H 2 O 2 for 20 minutes; in Group 2, 38% H 2 O 2 application (20 min) was followed by ozone (60 s); air produced by the healOzone machine (60 s) followed by 38% H 2 O 2 (20 min) was used in Group 3 (control). Bleaching sensitivity was evaluated via visual analogue scales, and a treatment-blinded reader objectively recorded tooth shades using a colorimeter before and 24 hours after bleaching (at α = 0.05). The H 2 O 2 /ozone combination did not result in pain sensations, while both ozone/H 2 O 2 and H 2 O 2 alone increased bleaching sensitivity (p < 0.001). Teeth achieved lighter shades (higher L*/lower b* values) after bleaching in all groups (p < 0.001), while Ozone boosted lighter tooth shades, irrespective of its use before or after H 2 O 2 (p < 0.05). Due to the complimentary effects, applying ozone after H 2 O 2 seems preferable for bleaching.

In vivo biofilm formation on stainless steel bonded retainers during different oral health-care regimens.

PubMed

Jongsma, Marije A; van der Mei, Henny C; Atema-Smit, Jelly; Busscher, Henk J; Ren, Yijin

2015-03-23

Retention wires permanently bonded to the anterior teeth are used after orthodontic treatment to prevent the teeth from relapsing to pre-treatment positions. A disadvantage of bonded retainers is biofilm accumulation on the wires, which produces a higher incidence of gingival recession, increased pocket depth and bleeding on probing. This study compares in vivo biofilm formation on single-strand and multi-strand retention wires with different oral health-care regimens. Two-centimetre wires were placed in brackets that were bonded to the buccal side of the first molars and second premolars in the upper arches of 22 volunteers. Volunteers used a selected toothpaste with or without the additional use of a mouthrinse containing essential oils. Brushing was performed manually. Regimens were maintained for 1 week, after which the wires were removed and the oral biofilm was collected to quantify the number of organisms and their viability, determine the microbial composition and visualize the bacteria by electron microscopy. A 6-week washout period was employed between regimens. Biofilm formation was reduced on single-strand wires compared with multi-strand wires; bacteria were observed to adhere between the strands. The use of antibacterial toothpastes marginally reduced the amount of biofilm on both wire types, but significantly reduced the viability of the biofilm organisms. Additional use of the mouthrinse did not result in significant changes in biofilm amount or viability. However, major shifts in biofilm composition were induced by combining a stannous fluoride- or triclosan-containing toothpaste with the mouthrinse. These shifts can be tentatively attributed to small changes in bacterial cell surface hydrophobicity after the adsorption of the toothpaste components, which stimulate bacterial adhesion to the hydrophobic oil, as illustrated for a Streptococcus mutans strain.

Clinical, radiographic, and histological observation of a human immature permanent tooth with chronic apical abscess after revitalization treatment.

PubMed

Shimizu, Emi; Ricucci, Domenico; Albert, Jeffrey; Alobaid, Adel S; Gibbs, Jennifer L; Huang, George T-J; Lin, Louis M

2013-08-01

Revitalization procedures have been widely used for the treatment of immature permanent teeth with apical periodontitis. The treatment procedures appear to be capable of encouraging continued root development and thickening of the canal walls. The nature of tissues formed in the canal space and at the root apex after revitalization has been shown histologically in several animal studies; similar studies in humans were recently reported. A 9-year-old boy had a traumatic injury to his upper anterior teeth. Tooth #9 suffered a complicated crown fracture with a pulp exposure, which was restored with a composite resin. The tooth developed a chronic apical abscess. Revitalization procedures were performed on tooth #9 because it was an immature permanent tooth with an open apex and thin canal walls. Twenty-six months after revitalization, the tooth had a horizontal crown fracture at the cervical level and could not be restored. The tooth was extracted and processed for routine histological and immunohistochemical examination to identify the nature of tissues formed in the canal space. Clinically and radiographically, the revitalization of the present case was successful because of the absence of signs and symptoms and the resolution of periapical lesion as well as thickening of the canal walls and continued root development. The tissue formed in the canal was well-mineralized cementum- or bone-like tissue identified by routine histology and immunohistochemistry. No pulp-like tissue characterized by the presence of polarized odontoblast-like cells aligning dentin-like hard tissue was observed. The tissues formed in the canal of revitalized human tooth are similar to cementum- or bone-like tissue and fibrous connective tissue. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

In vivo biofilm formation on stainless steel bonded retainers during different oral health-care regimens

PubMed Central

Jongsma, Marije A; van der Mei, Henny C; Atema-Smit, Jelly; Busscher, Henk J; Ren, Yijin

2015-01-01

Retention wires permanently bonded to the anterior teeth are used after orthodontic treatment to prevent the teeth from relapsing to pre-treatment positions. A disadvantage of bonded retainers is biofilm accumulation on the wires, which produces a higher incidence of gingival recession, increased pocket depth and bleeding on probing. This study compares in vivo biofilm formation on single-strand and multi-strand retention wires with different oral health-care regimens. Two-centimetre wires were placed in brackets that were bonded to the buccal side of the first molars and second premolars in the upper arches of 22 volunteers. Volunteers used a selected toothpaste with or without the additional use of a mouthrinse containing essential oils. Brushing was performed manually. Regimens were maintained for 1 week, after which the wires were removed and the oral biofilm was collected to quantify the number of organisms and their viability, determine the microbial composition and visualize the bacteria by electron microscopy. A 6-week washout period was employed between regimens. Biofilm formation was reduced on single-strand wires compared with multi-strand wires; bacteria were observed to adhere between the strands. The use of antibacterial toothpastes marginally reduced the amount of biofilm on both wire types, but significantly reduced the viability of the biofilm organisms. Additional use of the mouthrinse did not result in significant changes in biofilm amount or viability. However, major shifts in biofilm composition were induced by combining a stannous fluoride- or triclosan-containing toothpaste with the mouthrinse. These shifts can be tentatively attributed to small changes in bacterial cell surface hydrophobicity after the adsorption of the toothpaste components, which stimulate bacterial adhesion to the hydrophobic oil, as illustrated for a Streptococcus mutans strain. PMID:25572920

The survival of direct composite restorations in the management of severe tooth wear including attrition and erosion: A prospective 8-year study.

PubMed

Milosevic, A; Burnside, G

2016-01-01

Survival of directly placed composite to restore worn teeth has been reported in studies with small sample sizes, short observation periods and different materials. This study aimed to estimate survival for a hybrid composite placed by one clinician up to 8-years follow-up. All patients were referred and recruited for a prospective observational cohort study. One composite was used: Spectrum(®) (DentsplyDeTrey). Most restorations were placed on the maxillary anterior teeth using a Dahl approach. A total of 1010 direct composites were placed in 164 patients. Mean follow-up time was 33.8 months (s.d. 27.7). 71 of 1010 restorations failed during follow-up. The estimated failure rate in the first year was 5.4% (95% CI 3.7-7.0%). Time to failure was significantly greater in older subjects (p=0.005) and when a lack of posterior support was present (p=0.003). Bruxism and an increase in the occlusal vertical dimension were not associated with failure. The proportion of failures was greater in patients with a Class 3 or edge-to-edge incisal relationship than in Class 1 and Class 2 cases but this was not statistically significant. More failures occurred in the lower arch (9.6%) compared to the upper arch (6%) with the largest number of composites having been placed on the maxillary incisors (n=519). The worn dentition presents a restorative challenge but composite is an appropriate restorative material. This study shows that posterior occlusal support is necessary to optimise survival. Copyright © 2015 Elsevier Ltd. All rights reserved.

Anterior lamellar recession, blepharoplasty, and supratarsal fixation for cicatricial upper eyelid entropion without lagophthalmos

PubMed Central

Aghai, G H; Gordiz, A; Falavarjani, K G; Kashkouli, M B

2016-01-01

Purpose To assess the results of anterior lamellar recession, blepharoplasty, and supratarsal fixation procedure in patients with upper eyelid cicatricial entropion without lagophthalmos. Methods In a prospective interventional case series, 52 eyelids (32 patients) were included (April 2009–December 2010). Excluded were patients with previous eyelid surgeries, lagophthalmos, and <12 months of follow-up. Using a microscope, after recessing anterior lamella 3–4 mm above the eyelid margin, it was fixed with 4–5 interrupted 6-0 vicryl sutures. Excess anterior lamella was then excised (blepharoplasty), supratarsal fixation sutures (6-0 vicryl) were put and the skin was closed with 6-0 nylon sutures. Success and failure defined based upon eyelash-globe touch on the last follow-up visit (at least 12 months), respectively. Results There were 21 females (65.6%) and 11 males (34.4%) with a mean age of 69.7 years (SD=6.9) and mean follow-up of 21.06 months (SD=8.26). Success was observed in 39 (75%) and failure in 13 (25%). Mean time of failure was 4.5 months (SD=3). Although re-treatment with radio-frequency electrolysis (eight eyelids) and re-anterior lamellar recession (two eyelids) resulted in success in 12 eyelids with failure, two patients (three eyelids) declined further procedure. Except for thickened eyelid margin, no complications were observed. Conclusion Anterior lamellar recession, blepharoplasty, and supratarsal fixation procedure is an effective and safe technique for the treatment of the upper eyelid cicatricial entropion without lagophthalmos. PMID:26869158

Occlusion and Temporomandibular Function among Subjects with Mandibular Distal Extension Removable Partial Dentures

PubMed Central

Creugers, N. H. J.; Witter, D. J.; Van 't Spijker, A.; Gerritsen, A. E.; Kreulen, C. M.

2010-01-01

Objective. To quantify effects on occlusion and temporomandibular function of mandibular distal extension removable partial dentures in shortened dental arches. Methods. Subjects wearing mandibular extension removable partial dentures (n = 25) were compared with subjects with shortened dental arches without extension (n = 74) and with subjects who had worn a mandibular extension removable partial denture in the past (n = 19). Subjects with complete dentitions (n = 72) were controls. Data were collected at baseline and at 3-, 6-, and 9-year observations. Results. Occlusal activity in terms of reported awareness of bruxism and occlusal tooth wear of lower anterior teeth did not differ significantly between the groups. In contrast, occlusal tooth wear of premolars in shortened dental arches with or without extension dentures was significantly higher than in the controls. Differences amongst groups with respect to signs and symptoms related to temporomandibular disorders were not found. Occlusal support of the dentures did not influence anterior spatial relationship. Occlusal contacts of the denture teeth decreased from 70% for second premolars via 50% for first molars, to 30% for second molars. Conclusions. Mandibular distal extension removable partial dentures in moderate shortened dental arches had no effects on occlusion and temporomandibular function. PMID:20671961

Noninvasive and multidisciplinary approach to the functional and esthetic rehabilitation of amelogenesis imperfecta: a pediatric case report.

PubMed

de Souza, Juliana Feltrin; Fragelli, Camila Maria Bullio; Paschoal, Marco Aurélio Benini; Campos, Edson Alves; Cunha, Leonardo Fernandes; Losso, Estela Maris; Cordeiro, Rita de Cássia Loiola

2014-01-01

Case Report. An 8-year-old girl with amelogenesis imperfecta (AI) reported unsatisfactory aesthetics, difficulty in mastication, and dental hypersensitivity. The intraoral examination observed mixed dentition, malocclusion in anteroposterior relationships, anterior open bite, and dental asymmetry. A hypoplastic form of AI was diagnosed in the permanent dentition. A multidisciplinary planning was performed and divided into preventive, orthopedic, and rehabilitation stages. Initially, preventive treatment was implemented, with fluoride varnish applications, in order to protect the fragile enamel and reduce the dental sensitivity. In the second stage, the patient received an interceptive orthopedic treatment to improve cross-relationship of the arches during six months. Finally, the rehabilitation treatment was executed to establish the vertical dimension. In the posterior teeth, indirect composite resin crowns were performed with minimally invasive dental preparation. Direct composite resin restorations were used to improve the appearance of anterior teeth. Follow-Up. The follow-up was carried out after 3, 6, 12, and 18 months. After 18 months of follow-up, The restoration of integrity, oral hygiene, and patient satisfaction were observed . Conclusion. Successful reduction of the dental hypersensitivity and improvement of the aesthetic and functional aspects as well as quality of life were observed.

[Anatomy and imaging study of a new upper-agger nasi pathway of frontal sinus surgery].

PubMed

Liu, Zhixian; Li, Xiaohui; Wang, Peng; Yang, Gui; Li, Xingwei; Zhao, Peng

2014-10-01

To investigate the new surgical pathway of endoscopic frontal sinus surgery for frontal sinus lesions through the upper-agger nasi approach. The computed tomography (CT) scans from 32 patients were collected and subjected to three-dimensional reconstruction by Mimics. The distance in sagittal planes from anterior ethmoid artery to midpoint of axilla and to skull base attachment at anterior middle turbinate was measured. The distance in coronal planes between the perpendicular plate of middle turbinate and the orbital lamina was also detected as well as the height of agger nasi. Three-dimensional structures of the frontal sinus and its surrounding cells was reconstructed by Sinuses Trachea I software. We integrated the CT scans and the above data for simulating surgical operation on cadaveric heads. (1) Skull base attachment at anterior middle turbinate located at the anterior or posterior of aperture of frontal sinus. (2) The mean distance between anterior ethmoid artery and midpoint of axilla was (22.23 ± 2.78) mm on the left side and (22.30 ± 2.80) mm on right. The mean distance between anterior ethmoid artery and skull base attachment at anterior middle turbinate was (15.31 ± 2.82) mm on left and (15.39 ± 3.53) mm on right. The distance between perpendicular plate of middle turbinate and orbital lamina was (7.61 ± 1.34) mm on left and (7.80 ± 1.40) mm on right side. The height of the agger nasi was (8.33 ± 2.14) mm on left and (8.00 ± 2.57) mm on right. There was no statistical difference in the above data between left and right side (P > 0.05). (3) The visible three-dimensional structure showed that skull base attachment at the anterior middle turbinate was closely adjoined the aperture of frontal sinus, the space between sub-outer side of the attachment and orbital lamina, above the agger nasi cell or the upper area of the agger nasi cell was solely cell structures. Endoscopic frontal sinus surgery for frontal sinus lesions through the upper-agger nasi approach was practicable to solitary frontal sinus lesions and to solve the complex frontal sinus or frontal recess lesions by flexible operation according to the feature of the lesions.

Finite element analysis of the effect of force directions on tooth movement in extraction space closure with miniscrew sliding mechanics.

PubMed

Kojima, Yukio; Kawamura, Jun; Fukui, Hisao

2012-10-01

Miniscrews placed in bone have been used as orthodontic anchorage in extraction space closure with sliding mechanics. The movement patterns of the teeth depend on the force directions. To move the teeth in a desired pattern, the appropriate direction of force must be selected. The purpose of this article is to clarify the relationship between force directions and movement patterns. By using the finite element method, orthodontic movements were simulated based on the remodeling law of the alveolar bone. The power arm length and the miniscrew position were varied to change the force directions. When the power arm was lengthened, rotation of the entire maxillary dentition decreased. The posterior teeth were effective for preventing rotation of the anterior teeth through an archwire. In cases of a high position of a miniscrew, bodily tooth movement was almost achieved. The vertical component of the force produced intrusion or extrusion of the entire dentition. Within the limits of the method, the mechanical simulations demonstrated the effect of force direction on movement patterns. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Retrospective study on the performance of porcelain laminate veneers delivered by undergraduate dental students.

PubMed

Murphy, E; Ziada, H M; Allen, P F

2005-03-01

The aim of this study was to retrospectively evaluate the clinical performance of porcelain laminate veneer restorations delivered by undergraduate students at the Department of Restorative Dentistry, University Dental School and Hospital Cork and to analyze the factors that influence their prognosis and their effect on periodontal health. Patients who had veneers fitted over a period of 5 yrs. were recalled for evaluation. The recall protocol took the form of a questionnaire and a full clinical examination of the teeth involved and contra lateral control teeth. In all, 29 patients with 62 porcelain veneers were examined, only 2 of which were in the mandible. 77% of patients had veneers fitted due to discolouration, 13% in order to alter the shape or size of teeth and 10% due to palatal erosion. On the date of recall 89% of veneers had never debonded or fractured, 6% had to be rebonded since the date of insertion and 5% presented with a fracture. From this study it appears that porcelain laminate veneers are successful in the treatment of discoloured and irregular configured anterior teeth. It shows that undergraduate students can deliver satisfactory veneer restorations.

Clinical study of the safety and effectiveness of a novel over-the-counter bleaching tray system

PubMed Central

Ghalili, K Michael; Khawaled, Kamal; Rozen, Doran; Afsahi, Veda

2014-01-01

We investigated color change, gingival irritation, and tooth sensitivity in patients undergoing at-home vital tooth bleaching with a novel over-the-counter bleaching tray system. Tooth color shade in anterior teeth, supragingival plaque and gingivitis in Ramfjord teeth, as well as visual assessment of teeth gingival tissues and mucosa were evaluated in-office prior to treatment, after two consecutive applications of the 9% hydrogen peroxide bleaching product, after eight applications (10 minutes/day for 3 days at home), and after ten applications (50 minutes exposure over 5 days). Color stability was evaluated at 3 months after completing the treatment regimen. Over-the-counter bleaching products can be used by the patient at home without dentist supervision, but are frequently associated with gingival irritation and tooth sensitivity despite low concentrations of peroxide agents. Our investigations showed that the treatment is tolerable and safe with a low incidence of adverse effects. Any adverse effects associated with use of the whitening gel and tray are temporary, easily controlled, and often disappear within minutes of treatment. Statistical analysis revealed significant improvement in teeth whitening following treatment (mean color change of seven shades) and at three months after treatment. PMID:24591847

Cone Beam Computed Tomography Analysis in 3D Position of Maxillary Denture

PubMed Central

Jia, Ying; Yang, Hua; Li, Ping; Xiong, Jiangyan; Chen, Bo

2017-01-01

Abstract The dynamic correlation between teeth and denture morphology as well as the morphological positions needs to be explored. Methodology 63 adult patients with skeletal class III malocclusions that met the inclusion criteria were enrolled and imaged with Cone Beam Computed Tomography (CBCT), and Digital Imaging and Communications in Medicine (DICOM) data were collected. The torque angle and axial inclination were measured and analyzed for the corona, root, and entire body of every tooth on the maxilla. Results There is a statistically significant difference between the coronal axial inclination/coronal torque angle for the skeletal class III malocclusion cases and Andrew’s six keys of occlusion. On the sagittal plane of the maxillary denture (except that the secondary molar is inclined medial-distally), the remaining teeth are inclined towards the labia with slightly larger angles compared to the normal occlusion. In the coronal direction, the maxillary anterior teeth tend to have a corona that inclines medial-distally, whereas the posterior teeth have a buccal inclination compared to the normal occlusion. Conclusion Sagittal and transversal compensations prevail in maxillary dentures; for the camouflaged treatment design for skeletal class III, there is limited scope of sagittal and transversal movements on the maxillary denture. PMID:29104942

A comparison between red and infrared light for recording pulpal blood flow from human anterior teeth with a laser Doppler flow meter.

PubMed

Kijsamanmith, Kanittha; Timpawat, Siriporn; Vongsavan, Noppakun; Matthews, Bruce

2011-06-01

To compare red (635 nm) and infrared (780 nm) light for recording pulpal blood flow from human anterior teeth with a laser Doppler flow meter. Recordings were made from 7 healthy teeth in 5 subjects (aged 22-55 years) using a laser Doppler flow meter (Periflux 4001) equipped with both red and infrared lasers. Average blood flow signals were obtained with both light sources alternately from each tooth under five conditions: intact tooth without opaque rubber dam, intact tooth with dam, after injecting local anaesthetic (3% Mepivacaine) (LA) over the apex of the tooth and cavity preparation to almost expose the pulp, after removal and replacement of the pulp, and with the root canal empty. With infrared light, because of technical limitations, data were obtained for the first three conditions only. The dam significantly decreased the mean blood flow by 82%. Injecting LA and cavity preparation had no significant effect. With red light, dam produced a decrease of 56%, and the resulting signal was reduced by 33% after LA and cavity preparation. The remaining signal fell by 46% after pulp removal and replacement. This contribution of the pulp is similar to that recorded previously with infrared light. There was no significant further change when the pulp was finally removed. The importance of using opaque rubber dam is confirmed. With dam, there is no advantage to using red rather than infrared light, and in each case the pulp contributes less than 50% to the blood flow signal. Copyright © 2011 Elsevier Ltd. All rights reserved.

The aesthetic impact of enamel fluorosis on Irish adolescents.

PubMed

Browne, Deirdre; Whelton, Helen; O'Mullane, Denis; Tavener, Jacqueline; Flannery, Edel

2011-04-01

To assess the impact of differing degrees of enamel fluorosis on dental aesthetics according to Irish adolescents. The same participants also aesthetically rated other variations in dental appearances including a carious lesion, bleached teeth and a demarcated opacity. One hundred and fifty adolescents examined seven identical template photographs of an attractive dental smile displaying varying levels of enamel fluorosis (TF1, TF2, TF3), a demarcated opacity, no fluorosis (TF0), anterior caries and very white or bleached teeth. By indicating their level of agreement or disagreement with five statements on a five-point Likert scale, the participants rated the aesthetic acceptability of each of the photographs. Using paired t-tests with the Bonferroni correction, it was found that the photographs depicting the very white teeth and anterior caries were rated as the most and least aesthetically pleasing images, respectively. There was no significant difference in the ratings of the photographs displaying TF0, TF1 and TF2 levels of fluorosis indicating that these photographs were viewed similarly (P>0.002). The remaining two photographs (TF3 and the demarcated opacity) were rated similarly and significantly worse (P<0.002) than the photographs showing no or low grades of fluorosis (TF0, TF1 and TF2). TF3 level of fluorosis represented the break point at which enamel fluorosis became aesthetically objectionable to these participants. Low grades of fluorosis (TF1 and TF2) were rated similarly to the photograph depicting no fluorosis (TF0). © 2011 John Wiley & Sons A/S.

The relationships between the arrangement of teeth, root resorption, and dental maturity in bovine mandibular incisors

PubMed Central

An, Jin-kyu; Ono, Takashi

2017-01-01

Objective The objective of this study is to investigate the eruption pattern and root resorption of the bovine anterior dentition in relation to growth-related parameters based on dental maturity. Methods A cross-sectional study was conducted on 110 bovine anterior mandibles by using standard radiography, cone-beam computed tomography (CBCT), and actual measurements. We determined the relationships between the stages of dental maturity by using a modification of Demirjian's method and various growth-related parameters, such as the activity of the root-resorbing tissue and mobility of the deciduous teeth. The correlation of growth-related parameters with interdental spacing and distal unusual root resorption (DRR) of the deciduous fourth incisor was assessed. The cause of mesial unusual root resorption (MRR) of the deciduous fourth incisor was determined on the basis of the arrangement of the permanent third incisor. Results An independent t-test and chi-square test indicated significant differences in growth-related parameters associated with dental arch length discrepancy and factors related to the shedding of deciduous teeth between the low and high dental maturity groups. The samples with interdental spacing and DRR showed a larger sum of mesiodistal permanent crown widths and higher dental maturity than did the respective controls. Samples with MRR tended to show a lingually rotated distal tip of the adjacent tooth crown. Conclusions Dental maturity has relevance to the interdental spaces and unusual root resorption of mixed dentition. The position of the adjacent tooth crown on CBCT may be correlated with the occurrence of unusual root resorption of the incisor. PMID:29090124

Molar loss and powder diet leads to memory deficit and modifies the mRNA expression of brain-derived neurotrophic factor in the hippocampus of adult mice.

PubMed

Takeda, Yosuke; Oue, Hiroshi; Okada, Shinsuke; Kawano, Akira; Koretake, Katsunori; Michikawa, Makoto; Akagawa, Yasumasa; Tsuga, Kazuhiro

2016-12-05

It is known that tooth loss is known to be a risk factor for Alzheimer's disease and soft diet feeding induces memory impairment. Recent studies have shown that brain-derived neurotrophic factor (BDNF) is associated with tooth loss or soft diet in young animal model, and that BDNF expression is decreased in patients with Alzheimer's disease. However, single or combined effect of tooth loss and/or soft diet on brain function has not fully understood. Here we examined the effect of molar loss and powder diet on memory ability and the expression of BDNF mRNA in the hippocampus of adult C57BL/6J mice. Twenty eight-weeks-old C57BL/6J mice were divided into intact molar group and extracted molar group. They were randomly divided into the I/S group (Intact upper molar teeth/Solid diet feeding), the E/S group (Extracted upper molar teeth/Solid diet feeding), the I/P group (Intact upper molar teeth/Powder diet feeding), and the E/P group (Extracted upper molar teeth/Powder diet feeding). The observation periods were 4 and 16-week. To analyze the memory ability, the step-through passive avoidance test was conducted. BDNF-related mRNA in the hippocampus was analyzed by real-time polymerase chain reaction (RT-PCR). At 4 weeks later, we performed memory test and isolated brains to analyze. There were no differences in memory function and BDNF mRNA level between these four groups. However, at 16 weeks later, E/S and E/P group showed memory impairment, and decreased level of BDNF mRNA. Whereas, the powder diet had no effect on memory function and BDNF mRNA level even at 16 weeks later. These results suggest that the effect of molar loss and powder diet on memory function and BDNF mRNA levels were different, molar loss may have a greater long-term effect on memory ability than powder diet does.

Persistent lingual ulceration (Riga-Fede disease) in an infant with Down syndrome and natal teeth: a case report.

PubMed

Senanayake, Manouri P; Karunaratne, Irantha

2014-08-22

Riga-Fede disease is a rare pediatric condition in which chronic lingual ulceration results from repetitive trauma. Neonatal teeth or underlying neuro-developmental disorders which include Down syndrome are described as causative factors, but to the best of our knowledge, this is the first case report of both Down syndrome and natal teeth coexisting. The need for early extraction in the presence of two risk factors is highlighted in this case report. An 18-month-old Sinhalese male presented with an ulcerating lingual mass on the ventral surface of the tongue. The lesion had progressed over the past six months. He also had clinically diagnosed Down syndrome.The ulcer was non-tender, indurated, and had elevated margins. It was not bleeding and two natal teeth in lower central dentition were seen in apposition with the lesion. There was no regional lymphadenopathy but the ulcer was causing concerns as it mimicked a malignant lesion. A clinical diagnosis of Riga-Fede disease caused by raking movements of the tongue against anterior natal teeth by a child who was developmentally delayed and prone to suck on his tongue was made. The mother was reassured and the natal teeth were extracted. Early extraction of natal teeth is recommended only if there is a risk of aspiration or interference with breast feeding. Although Down syndrome is among the neuro-developmental conditions that lead to this lesion, its occurrence is usually at an older age. The presence of natal teeth together with Down syndrome caused the lesion to occur in infancy. Awareness of the benign nature of this rare condition by pediatricians and dental practitioners is important as it will allay anxiety and avoid unnecessary biopsy. This case also highlights the impact of two risk factors and needs consideration as an added indication for the early extraction of natal teeth.

The sodium hypochlorite accident: experience of diplomates of the American Board of Endodontics.

PubMed

Kleier, Donald J; Averbach, Robert E; Mehdipour, Omid

2008-11-01

To better understand the etiology associated with sodium hypochlorite accidents, we surveyed diplomates of the American Board of Endodontics. Of the 314 diplomates who responded, 132 reported experiencing a sodium hypochlorite accident. Questions were asked about the age and sex of the patient as well as the tooth being treated, preoperative signs, symptoms, diagnosis, and radiographic appearance. Data were analyzed by chi-square tests. Significantly more women experienced sodium hypochlorite accidents compared with men (p < 0.0001). More maxillary teeth than mandibular teeth (p < 0.0001) and more posterior than anterior teeth (p < 0.0001) were involved. A diagnosis of pulp necrosis with radiographic findings of periradicular radiolucency were positively associated with such accidents (p < 0.0001). Most respondents reported that patient signs and symptoms completely resolved within a month. The occurrence of an accident, by itself, did not adversely affect the endodontic prognosis of the involved tooth. Anatomic variations may contribute significantly to the occurrence of a sodium hypochlorite accident.

Age Estimation of Infants Through Metric Analysis of Developing Anterior Deciduous Teeth.

PubMed

Viciano, Joan; De Luca, Stefano; Irurita, Javier; Alemán, Inmaculada

2018-01-01

This study provides regression equations for estimation of age of infants from the dimensions of their developing deciduous teeth. The sample comprises 97 individuals of known sex and age (62 boys, 35 girls), aged between 2 days and 1,081 days. The age-estimation equations were obtained for the sexes combined, as well as for each sex separately, thus including "sex" as an independent variable. The values of the correlations and determination coefficients obtained for each regression equation indicate good fits for most of the equations obtained. The "sex" factor was statistically significant when included as an independent variable in seven of the regression equations. However, the "sex" factor provided an advantage for age estimation in only three of the equations, compared to those that did not include "sex" as a factor. These data suggest that the ages of infants can be accurately estimated from measurements of their developing deciduous teeth. © 2017 American Academy of Forensic Sciences.

Fetal developmental change in topographical relationship between the human lateral pterygoid muscle and buccal nerve

PubMed Central

Katori, Y; Yamamoto, M; Asakawa, S; Maki, H; Rodríguez-Vázquez, J F; Murakami, G; Abe, S

2012-01-01

In adults, the lateral pterygoid muscle (LPM) is usually divided into the upper and lower heads, between which the buccal nerve passes. Using sagittal or horizontal sections of 14 fetuses and seven embryos (five specimens at approximately 20–25 weeks; five at 14–16 weeks; four at 8 weeks; seven at 6–7 weeks), we examined the topographical relationship between the LPM and the buccal nerve. In large fetuses later than 15 weeks, the upper head of the LPM was clearly discriminated from the lower head. However, the upper head was much smaller than the lower head in the smaller fetuses. Thus, in the latter, the upper head was better described as an ‘anterior slip’ extending from the lower head or the major muscle mass to the anterior side of the buccal nerve. The postero-anterior nerve course seemed to be determined by a branch to the temporalis muscle (i.e. the anterior deep temporal nerve). At 8 weeks, the buccal nerve passed through the roof of the small, fan-like LPM. At 6–7 weeks, the LPM anlage was embedded between the temporobuccal nerve trunk and the inferior alveolar nerve. Therefore, parts of the LPM were likely to ‘leak’ out of slits between the origins of the mandibular nerve branches at 7–8 weeks, and seemed to grow in size during weeks 14–20 and extend anterosuperiorly along the infratemporal surface of the prominently developing greater wing of the sphenoid bone. Consequently, the topographical relationship between the LPM and the buccal nerve appeared to ‘change’ during fetal development due to delayed development of the upper head. PMID:22352373

Peripheral calcifying cystic odontogenic tumour of the maxillary gingiva.

PubMed

de Lima, Ana Paula; Kitakawa, Dárcio; Almeida, Janete Dias; Brandão, Adriana Aigotti Haberbeck; Anbinder, Ana Lia

2012-08-23

Odontogenic tumors are lesions that are derived from remnants of the components of the developing tooth germ. The calcifying cystic odontogenic tumor or calcifying odontogenic cyst is a benign cystic neoplasm of odontogenic origin that is characterized by an ameloblastoma-like epithelium and ghost cells. Calcifying cystic odontogenic tumor may be centrally or peripherally located, and its ghost cells may exhibit calcification, as first described by Gorlin in 1962. Most peripheral calcifying cystic odontogenic tumors are located in the anterior gingiva of the mandible or maxilla. Authors report a rare case of a peripheral calcifying cystic odontogenic tumor of the maxillary gingiva. A 39-year-old male patient presented with a fibrous mass on the attached buccal gingiva of the upper left cuspid teeth. It was 0.7-cm-diameter, painless and it was clinically diagnosed as a peripheral ossifying fibroma. After an excisional biopsy, the diagnosis was peripheric calcifying cystic odontogenic tumor. The patient was monitored for five years following the excision, and no recurrence was detected. All biopsy material must be sent for histological examination. If the histological examination of gingival lesions with innocuous appearance is not performed, the frequency of peripheral calcifying cystic odontogenic tumor and other peripheral odontogenic tumors may be underestimated.

Floor of the nose mucosa lysis and labial abscess caused by a bee sting.

PubMed

Alemán Navas, Ramón Manuel; Martínez Mendoza, María Guadalupe; Herrera, Henry; Herrera, Helen Piccolo de

2009-01-01

Hymenoptera order includes bees, which have a stinging apparatus at the tail capable of delivering venom to the affected tissues. Myocardial infarction, acute renal failure, Necrotizing fasciitis, fatal infection and hemifacial asymmetry, are some of the unusual reactions reported following hymenoptera stings. This paper reports a case of bee sting in the right floor of the nose that mimicked an odontogenic infection affecting the upper lip, canine space and nasal cavity such as in cases of infection secondary to pulpal or periodontal pathology of the anterior teeth. After a thorough clinical and radiographic examination, odontogenic infection was discarded and the diagnosis of floor of the nose mucosal lysis and lip abscess secondary to a bee sting was made. This case was successfully managed with adequate incision, drainage and antibiotics without any further complication. There are several reports of unusual reactions following hymenoptera stings. However, just a few of them referred to infections of local reactions and none of them related to the anatomic location affected in the patient of the present case. Early diagnosis and treatment prevented infection dissemination and the likelihood of tissue necrosis as in previously reported cases of Necrotizing fasciitis.

Orthodontic treatment and follow-up of a patient with cerebral palsy and spastic quadriplegia.

PubMed

Çifter, Muhsin; Cura, Nil

2016-10-01

This report describes the clinical orthodontic management of a patient with spastic quadriplegia and cerebral palsy. Guidelines to overcome difficulties encountered during the treatment period are suggested. A 13-year-old boy with cerebral palsy and spastic quadriplegia complained of an undesirable oral appearance because of his malocclusion. He had a Class II molar relationship, with severe maxillary and moderate mandibular anterior crowding. Enamel hypoplasia was apparent on all teeth. He had losses of body function and upper extremity function of 70% and 39%, respectively. His physical limitations necessitated a treatment approach that did not rely on patient-dependent appliances. The treatment plan called for maxillary first premolar extractions, mandibular incisor protrusion, and air rotor stripping. The patient's oral function and esthetic appearance were significantly improved. Aligned dental arches with good occlusion were obtained. The patient's self-confidence improved during the treatment period. Physical appearance can influence personality and social acceptability. Corrective orthodontic treatment for patients with physical handicaps can improve not only oral function, but also self-confidence and self-esteem. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

PubMed Central

Paolantonio, E.G.; Antonini, G.; Saulle, R.; La Torre, G.; Deli, R.

2016-01-01

SUMMARY The ratio of bad habits, mouth breathing and malocclusion is an important issue in view of prevention and early treatment of disorders of the craniofacial growth. While bad habits can interfere with the position of the teeth and normal pattern of skeletal growth, on the other hand obstruction of the upper airway, resulting in mouth breathing, changes the pattern of craniofacial growth causing malocclusion. Our crosssectional study, carried out on 3017 children using the ROMA index, was developed to verify if there was a significant correlation between bad habits/mouth breathing and malocclusion. The results showed that an increase in the degree of the index increases the prevalence of bad habits and mouth breathing, meaning that these factors are associated with more severe malocclusions. Moreover, we found a significant association of bad habits with increased overjet and openbite, while no association was found with crossbite. Additionally, we found that mouth breathing is closely related to increased overjet, reduced overjet, anterior or posterior crossbite, openbite and displacement of contact points. Therefore, it is necessary to intervene early on these aetiological factors of malocclusion to prevent its development or worsening and, if already developed, correct it by early orthodontic treatment to promote eugnatic skeletal growth. PMID:27958599

A revision of hominin fossil teeth from Fontana Ranuccio (Middle Pleistocene, Anagni, Frosinone, Italy).

PubMed

Rubini, Mauro; Cerroni, Vittorio; Festa, Giulia; Sardella, Raffaele; Zaio, Paola

2014-12-01

The Fontana Ranuccio hominin teeth (FR, Latium, Italy) are dated to the Middle Pleistocene. In previous studies these teeth were classified as two lower (left and right) second molars, one lower left central incisor and a badly worn incisor crown, the exact position of which could not be determined. In 2012 these remains were acquired by the Anthropological Service of S.B.A.L. (Italian Ministry of Culture) and for this reason re-analysed. In a thorough revision we have reassessed them both morphologically and dimensionally as two lower (left and right) first molars, one lower left lateral incisor and a possible upper left canine. The comparison with penecontemporaneous and diachronic samples shows that the Fontana Ranuccio teeth are morphologically similar to Atapuerca-Sima de los Huesos, Arago XIII and Neanderthal samples. Copyright © 2014 Elsevier Ltd. All rights reserved.

A new oviraptorid (Dinosauria: Theropoda) from the Upper Cretaceous of southern China.

PubMed

Wang, Shuo; Sun, Chengkai; Sullivan, Corwin; Xu, Xing

2013-01-01

This paper describes a new oviraptorid dinosaur taxon, Ganzhousaurus nankangensis gen. et sp. nov., based on a specimen collected from the Upper Cretaceous Nanxiong Formation of Nankang County, Ganzhou City, Jiangxi Province, southern China. This new taxon is distinguishable from other oviraptorids based on the following unique combination of primitive and derived features: relatively shallow dentary; absence of fossa or pneumatopore on lateral surface of dentary; weakly downturned anterior mandibular end; shallow depression immediately surrounding anterior margin of external mandibular fenestra; external mandibular fenestra subdivided by anterior process of surangular; dentary posteroventral process slightly twisted and positioned on mandibular ventrolateral surface; shallow longitudinal groove along medial surface of dentary posteroventral process; angular anterior process wider transversely than deep dorsoventrally; sharp groove along ventrolateral surface of angular anterior process; ventral border of external mandibular fenestra formed mainly by angular; ventral flange along distal half of metatarsal II; and arctometatarsal condition absent. Phylogenetic analysis places Ganzhousaurus nankangensis gen. et sp. nov. in the clade Oviraptoridae, together with Oviraptor, Citipati, Rinchenia and the unnamed Zamyn Khondt oviraptorid.

Overlays or ceramic fragments for tooth restoration: an analysis of fracture resistance.

PubMed

Tavarez, Rudys Rodolfo de Jesus; Firoozmand, Leily Macedo; Silva, Mônica Barros; Malheiros, Adriana Santos; Bandéca, Matheus Coelho

2014-01-01

The aim of this study was to evaluate the mode of fracture and resistance of partial ceramic restorations of posterior teeth. Thirty healthy upper premolars were selected and divided into three groups (n = 10): Group 1- control, healthy unrestored teeth, group 2-teeth restored with ceramic fragments; and group 3-teeth restored with ceramic overlays. The restorations were manufactured with feldspathic ceramic and cemented with RelyX ARC resin cement. After being stored in distilled water for 7 days, the teeth were subjected to axial compression mechanical testing with a universal testing machine. Force was applied to the long axis of the tooth at a speed of 0.5 mm/min until fracture. The data were analyzed with one-way ANOVA and Tukey's test (5%). The mode of fracture was scored according to the degree of involvement of the tooth structure and the type of restoration. A significant difference (p < 0.05) was showed between groups 2 (1155 N) and 3 (846.6 N), but there was no significant difference between group 1 and the other groups (1046 N), More extensive fractures were prevalent in the healthy teeth group (Group 1), which had no occlusal coverage; less severe fractures were found in groups 2 and 3. We conclude that teeth restored with ceramic fragments may offer greater resistance to fractures compared to teeth that have overlay restorations.

Occlusal characteristics and prevalence of associated dental anomalies in the primary dentition.

PubMed

Lochib, Seema; Indushekar, K R; Saraf, Bhavna Gupta; Sheoran, Neha; Sardana, Divesh

2015-06-01

Morphological variations in primary dentition are of great concern to a pediatric dentist as it may pose clinical problems like dental caries, delayed exfoliation and also anomalies in the permanent dentition, such as impaction of successors, supernumerary teeth, permanent double teeth or aplasia of teeth. The present study was conducted to investigate the presence of dental anomalies in the primary dentition of 1000 schoolchildren in the 3-5 year-old age group in Faridabad. One-thousand schoolchildren were examined using Type III examination (WHO, 1997) for primary molar relationship, occlusal characteristics, primate spaces, physiological spaces and other anomalies of teeth, including number and morphology. The prevalence of physiological spaces in maxillary and mandibular arches was 50.9% and 46.7%, respectively, whereas primate spaces were found in 61.7% of the children in the maxillary arch and 27.9% in the mandibular arch. The prevalence of unilateral anterior and posterior cross-bite was 0.1% and 0.8%, respectively, in the present study. The prevalence of hypodontia in the primary dentition was found to be 0.4% and the prevalence of fusion and gemination in the present study was 0.5%. Double teeth (fusion and gemination) and hypodontia were the most common dental anomalies found in the primary dentition in the present study. Copyright © 2014 Ministry of Health, Saudi Arabia. Published by Elsevier Ltd. All rights reserved.

Intertooth patterns of hypoplasia expression: implications for childhood health in the classic Maya collapse.

PubMed

Wright, L E

1997-02-01

Enamel hypoplasias, which record interacting stresses of nutrition and illness during the period of tooth formation, are a key tool in the study of childhood health in prehistory. But interpretation of the age of peak morbidity is complicated by differences in susceptibility to stress both between tooth positions and within a single tooth. Here, hypoplasias are used to evaluate the prevailing ecological model for the collapse of Classic Period Lowland Maya civilization, circa AD 900. Hypoplasias were recorded in the full dentition of 160 adult skeletons from six archaeological sites in the Pasion River region of Guatemala. Instead of constructing a composite scale of stress experience, teeth are considered separately by position in the analysis. No statistical differences are found in the proportion of teeth affected by hypoplasia between "Early," Late Classic, and Terminal Classic Periods for anterior teeth considered to be most susceptible to stress, indicating stability in the overall stress loads affecting children of the three chronological periods. However, hypoplasia trends in posterior teeth may imply a change in the ontogenetic-timing of more severe stress episodes during the final occupation and perhaps herald a shift in child-care practices. These results provide little support for the ecological model of collapse but do call to attention the potential of posterior teeth to reveal subtle changes in childhood morbidity when consideredindividually.

Cerec omnicam and the virtual articulator--a case report.

PubMed

Fritzsche, G

2013-01-01

This case report demonstrates how two opposing teeth were restored with full crowns using Cerec software version 4.2 (pre-release version). In addition, an anterior tooth was provided with a veneer. The situation was scanned with the Cerec Omnicam. The new virtual articulator was used for the design to obtain correct dynamic contacts. The Cerec Omnicam can scan the entire situation prior to preparation without the help of an assistant, as no surface pretreatment is necessary. The locations of the occlusal contacts can be marked with articulating paper and are indicated on the virtual models. Selective deletion of individual areas allows the prepared teeth to be rescanned, considerably speeding up the workflow. A video demonstration is available of the acquisition and design procedure.

Maxillary implant-retained partial overdenture with Dolder bar attachment: a clinical report.

PubMed

Kim, Hyeongil; Buhite, Robert J; Monaco, Edward A

2015-03-01

This article describes a technique for maintaining a maxillary Kennedy III partial removable dental prosthesis design in a patient who had non-restorable failing abutments by replacing the abutments with dental implants. Two implants were placed immediately after extraction of the abutment teeth in the anterior maxilla. After the implants were fully integrated, a Dolder bar attachment was fitted onto the implants. A new maxillary partial removable dental prosthesis was fabricated using the implants and the remaining natural teeth as abutments to restore function and esthetics. With the aid of dental implants, this Kennedy III maxillary removable dental prosthesis design could provide additional retention and support by promoting cross-arch stability and tissue, implant and tooth support. The patient's satisfaction was significantly increased.

Occurrence and severity of enamel decalcification adjacent to bracket bases and sub-bracket lesions during orthodontic treatment with two different lingual appliances

PubMed Central

Klang, Elisabeth; Helms, Hans-Joachim; Wiechmann, Dirk

2016-01-01

Summary Background: Using lingual enamel surfaces for bracket placement not only has esthetic advantages, but may also be suitable in terms of reducing frequencies of enamel decalcifications. Objective: To test the null-hypothesis that there is no significant difference in enamel decalcification or cavitation incidence adjacent to and beneath bracket bases between two lingual multi-bracket (MB) appliances that are different in terms of design, material composition, and manufacturing technology (group A: WIN, DW-LingualSystems; group B: Incognito, 3M-Unitek), taking into account patient- and treatment-related variables on white spot lesion (WSL) formation. Methods: Standardized, digital, top-view photographs of 630 consecutive subjects (16214 teeth; n Incognito = 237/6076 teeth; n WIN = 393/10138 teeth; mean age: 17.47±7.8; m/f 43.2/56.8%) with completed lingual MB treatment of the upper and lower permanent teeth 1–7 were screened for decalcification or cavitation adjacent to and beneath the bracket bases before and after treatment, scored from 0 to 7. Non-parametric ANOVA was used for main effects ‘appliance type’, ‘gender’, ‘treatment complexity’, ‘grouped age’ (≤16/>16 years), and ‘treatment duration’ as covariable, at an α-level of 5%. Results: About 2.57% [5.94%] of all teeth in group A [B] developed decalcifications. Subject-related incidence was 9.59% [16.17%] for upper incisors in group A [B], and 12.98% [25.74%] for all teeth 16–46. There were significant effects by gender, age, and treatment duration. Conclusion: The null-hypothesis was rejected: sub-bracket lesions were significantly less frequent in group A, while frequencies of WSL adjacent to brackets were not significantly affected by appliance type. In view of the overall low incidences of lingual post-orthodontic white-spot lesions, the use of lingual appliances is advocated as a valid strategy for a reduction of enamel decalcifications during orthodontic treatment. PMID:26420772

Spatial and functional modeling of carnivore and insectivore molariform teeth.

PubMed

Evans, Alistair R; Sanson, Gordon D

2006-06-01

The interaction between the two main competing geometric determinants of teeth (the geometry of function and the geometry of occlusion) were investigated through the construction of three-dimensional spatial models of several mammalian tooth forms (carnassial, insectivore premolar, zalambdodont, dilambdodont, and tribosphenic). These models aim to emulate the shape and function of mammalian teeth. The geometric principles of occlusion relating to single- and double-crested teeth are reviewed. Function was considered using engineering principles that relate tooth shape to function. Substantial similarity between the models and mammalian teeth were achieved. Differences between the two indicate the influence of tooth strength, geometric relations between upper and lower teeth (including the presence of the protocone), and wear on tooth morphology. The concept of "autocclusion" is expanded to include any morphological features that ensure proper alignment of cusps on the same tooth and other teeth in the tooth row. It is concluded that the tooth forms examined are auto-aligning, and do not require additional morphological guides for correct alignment. The model of therian molars constructed by Crompton and Sita-Lumsden ([1970] Nature 227:197-199) is reconstructed in 3D space to show that their hypothesis of crest geometry is erroneous, and that their model is a special case of a more general class of models. (c) 2004 Wiley-Liss, Inc.

Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern.

PubMed

Farret, Marcel Marchiori

2016-06-01

This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) as one of the requirements to become diplomate by the BBO.

Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern

PubMed Central

Farret, Marcel Marchiori

2016-01-01

ABSTRACT This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) as one of the requirements to become diplomate by the BBO. PMID:27409659

The articulatory characteristics of the tongue in anterior openbite: observation by use of dynamic palatography.

PubMed

Suzuki, N; Sakuma, T; Michi, K; Ueno, T

1981-01-01

The tongue movements during the production of Japanese speech sounds in five patients with anterior openbite associated with 1-5 mm of overjet were investigated using dynamic palatography and cinematography. The dynamic palatograph is an electric device capable of recording constantly changing palatolingual contact as a function of time by use of a thin plastic artificial palate equipped with 63 electrodes. As a result, the following articulatory characteristics were observed during the utterance of the Japanese sounds /s/,/f/,/t/,/d/,/n/,/r/,/ts/,/tf/,/dz/,/d3/. (1) The area of maximal palatolingual contacts was smaller than the normal. (2) Forward positioning of the tongue was confirmed in all cases. (3) The interruption of the breath stream was made with the dorsal surface of the tongue and the maxillary anterior teeth. (4) The sounds /s/,/f/,/dz/,/d3/, were recognized as distorted sound as /theta/, in English.

Oxygen saturation in the dental pulp of permanent teeth: a critical review.

PubMed

Bruno, Kely Firmino; Barletta, Fernando Branco; Felippe, Wilson Tadeu; Silva, Júlio Almeida; Gonçalves de Alencar, Ana Helena; Estrela, Carlos

2014-08-01

Pulse oximetry is a noninvasive method for assessing vascular health based on oxygen saturation level. The method has recently also been used to assess dental pulp vitality, but a median oxygen saturation level suggestive of normal pulp physiology has not been determined. The objective of this study was to make a critical analysis of the published research to establish the median oxygen saturation for the diagnosis of normal dental pulps in maxillary anterior permanent teeth using pulse oximetry. Studies reporting on the use of pulse oximeters to determine oxygen saturation in dental pulps were retrieved using the MEDLINE, Scientific Electronic Library Online, and Cochrane Central Register of Controlled Trials databases plus a manual search of relevant references cited by selected articles. Different combinations of the terms "oximetry," "oximeter," "pulp," "dental," and "dentistry" were used in the search. Statistical analysis was performed for each group of teeth (central incisors, lateral incisors, and canines) using R statistical software (US EPA ORD NHEERL, Corvallis, OR) and a random effects model (P < .0001) with an I(2) of 99%. Of the 295 articles found, only 6 met the inclusion criteria (472 teeth). Of these, the number of articles included in each analysis (according to tooth group) was as follows: all 6 studies (288 teeth) for central incisors at a median oxygen saturation of 87.73%, 3 studies (90 teeth) for lateral incisors at a median oxygen saturation of 87.24%, and 4 studies (94 teeth) for canines at a median oxygen saturation of 87.26%. The median oxygen saturation in normal dental pulps of permanent central incisors, lateral incisors, and canines was higher than 87%. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Similar influence of stabilized alkaline and neutral sodium hypochlorite solutions on the fracture resistance of root canal-treated bovine teeth.

PubMed

Souza, Erick Miranda; Calixto, Amanda Martins; Lima, Camila Nara E; Pappen, Fernanda Geraldo; De-Deus, Gustavo

2014-10-01

Stabilizing sodium hypochlorite (NaOCl) at an alkaline pH is proposed to increase solution stability and tissue dissolution ability; however, a reduction on the flexural strength of dentin discs has been found to be a side effect. This study sought to determine whether a stabilized alkaline NaOCl reduces the fracture resistance of root canal-treated bovine teeth after root canal preparation compared with a neutral solution counterpart. The 4 anterior incisors were removed from 20 mandibular bovine jaws, and each 1 was randomly assigned to 1 of 4 groups (20 teeth each). Teeth were prepared with a sequence of 6 K-type files. The following experimental groups received a different irrigation regimen: G1: distilled water (negative control), G2: 5% NaOCl at a pH of 7.2, and G3: 5% NaOCl at a pH of 12.8; in the positive control group (G4), teeth remained untreated. The time of contact and volume of solution were carefully standardized. After bone and periodontal ligament simulation, teeth were subjected to a fracture resistance test. A significant difference was observed among the 4 groups tested (analysis of variance, P < .05). The 5% NaOCl groups (G2 and G3) presented significantly lower resistance to fracture than the control (G1 and G4) (Tukey test, P < .05). Both NaOCl solutions similarly reduced the fracture resistance at approximately 30% (Tukey test, P > .05). No differences were observed between positive and negative control groups (Tukey test, P > .05). Stabilized alkaline and neutral NaOCl solutions similarly reduced the fracture resistance of root canal-treated bovine teeth by about 30%. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Satisfaction with Dental Appearance and Attitude toward improving Dental Esthetics among Patients attending a Dental Teaching Center.

PubMed

Maghaireh, Ghada A; Alzraikat, Hanan; Taha, Nessrin A

2016-01-01

The aim of this study was to evaluate the factors influencing the satisfaction of dental appearance and attitude toward treatments to improve dental esthetics among patients attending a dental teaching center. A questionnaire was used to collect data of four background variables among 450 patients attended a dental teaching center in the city of Irbid in Jordan. The questionnaire enclosed self-reported questions about the appearance of anterior teeth, received esthetic treatment and desired treatment for improving esthetics. Descriptive, multiple logistic regression and Chi-square tests were used for data analysis (p ≤ 0.05). The 450 participants consisted of (66.2%) male and (33.8%) female. Of these, 69.3% were satisfied with their dental appearance and 58.0% with the color of their teeth. Esthetic restorations were the most received treatment (39.8%) and whitening of teeth was the most desired treatment (55.3%). The patients' satisfaction with dental appearance was influenced by teeth color, crowding and receiving whitening (p < 0.05. r = 0.561, r(2) = 0.315). The most desired esthetic treatments influenced by the satisfaction with dental appearance were esthetic restorations and orthodontics (p < 0.05. r = 0.223, r(2) = 0.05). Significantly more female reported having esthetic restorations and orthodontics (p = 0.008, 0.000) and desired to have orthodontic, crowns or veneers and esthetic restorations (p = 0.000, 0.015, 0.028). Satisfaction with dental appearance was affected by teeth color, feeling teeth are crowded, desire for esthetic restorations and orthodontic treatment. A high percentage of patients were not satisfied with the color of their teeth. Recognizing the factors that affect patients' satisfaction with their present dental appearance and attitude toward treatments to improve dental esthetic can guide clinicians to strategies to improve esthetics.

Is the value of oral health related to culture and environment, or function and aesthetics?

PubMed

Nassani, M Z; Kay, E J; Al-Nahhal, T I; Okşayan, R; Usumez, A; Mohammadi, T M

2015-12-01

To examine the disutility of tooth loss. It compared how people value their teeth in two countries which are culturally similar in order to explore the effect of culture on self-perceptions of oral health. Cross sectional study. Participants were recruited from subjects attending two hospitals in Turkey and in Iran. Nineteen descriptions of mouths with varying degrees and types of tooth loss were presented to the participants. They were shown mouth models of partially edentate dentitions and the teeth missing were explained in relation to the participants own mouth. The participants were specifically asked to consider the role their teeth played in function (chewing), communication (speech) and aesthetics (looks) along with "all the other things that make your mouth important". The participants were asked to indicate on a visual analogue scale how they would value the health of their mouth if they lost the tooth/teeth described and the resultant space was left unrestored. Overall 152 subjects participated, 78 in Turkey and 74 in Iran with 83 being female and 69 male. Their mean age was 29.5 years (SD 9.3), 62.5% had experienced tooth loss and 37.5% had complete (or completely restored) dentitions. Although there were no differences between the two countries in the degree of utility people attached to anterior teeth, Turkish participants attached significantly more disutility than Iranians to the loss of premolar and molar teeth (p < 0.003). Country of origin had an influence on the value placed on certain parts of the dentition and this effect is independent of the number of missing teeth, gender and age. This implies that attitudes to oral health are influenced by prevalent cultural attitudes more than by function.

Dentinogenic responses after direct pulp capping of miniature swine teeth with Biodentine.

PubMed

Tziafa, Christina; Koliniotou-Koumpia, Eugenia; Papadimitriou, Serafim; Tziafas, Dimitrios

2014-12-01

The aim of this study was to evaluate pulpal responses after experimental direct pulp capping of mechanically exposed teeth with a new calcium silicate-based dentin replacement material. Thirty-four anterior and posterior teeth of 3 miniature swine were used. Class V or I cavities were prepared on the buccal or occlusal surfaces, respectively. Pulpal exposures were further performed using a round carbide bur 0.8 mm in diameter. Exposures were treated with white MTA Angelus (Angelus, Londrina, PR, Brazil) or Biodentine (Septodont, Saint Maur des Fosses, France), and the cavities were further restored with Biodentine. The pulpal tissue responses were histologically assessed at postoperative periods of 3 and 8 weeks. Data were statistically analyzed using the Kruskal Wallis and the Mann-Whitney U tests. Inflammatory infiltration or pulp tissue necrosis was not found in any of the specimens. All teeth showed mineralized matrix formation in the form of a complete hard tissue bridge composed of osteodentin or osteodentin followed by a discontinuous or continuous reparative dentin zone. A significantly higher thickness of the hard tissue bridge was found in the group of teeth treated with Biodentine at both 3 and 8 weeks. A number of teeth, which were under root development at the onset of the experimental procedures, exhibited ectopic pulp calcification. The application of both calcium silicate-based materials in direct contact with the mechanically exposed pulp of healthy miniature swine teeth led to pulp repair with complete hard tissue bridge formation. The thickness of hard tissue bridges was significantly higher after pulp capping with Biodentine. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

[Quantitative evaluation of fabricating complete denture by computer numerical control in manufacturing dentition and baseplate separately plus adhesive molding].

PubMed

Wang, H; Lv, P J; Wang, Y; Sun, Y C

2016-10-18

To quantitatively evaluate the assembly precision of fabricating complete denture by computer numerical control (CNC) in manufacturing dentition and baseplate separately plus adhesive molding. The 3D surface data of a standard edentulous maxilla plaster cast model and the temporary base-plate were obtained using an Activity 880 3D scanner. The data (data1) of a complete denture were designed using a set of computer aided design (CAD) software developed by the research group of this study. The pins without undercut were designed as 3D shape of the joining area of the dentition and the baseplate by using the software of Imageware 13.2 and Geomagic Studio 2013. Zero in the top and 0.05 mm in the rest surfaces of the retention pins were set for adhesive clearance. Zenotec T1 (5-axis milling machine) was employed to manufacture polymethyl methacrylate (PMMA) dentition and baseplate. Double sides posterior and one anterior "union teeth" were got. The teeth were inserted into the retention pins in the baseplate and cemented with self-curing resin (Huge Dental Material Co., Ltd). The denture was scanned with the 3D scanner to obtain dataset Data4. Data2 and Data3 registration was set in Data4, Data2 and Data3 were united to gain Data 5. The adhesive clearance on the top of the retentional pins was measured, which was originally designed into 0 mm, and the assembly precision of dentition and baseplate obtained. The average clearance measurements between the dentition and the baseplate: left molar teeth (0.44±0.04) mm, max 0.52 mm, min 0.29 mm; right molar teeth (0.52±0.07) mm, max 0.64 mm, min 0.28 mm; anterior teeth (0.60±0.10) mm, max 0.81 mm, min 0.40 mm; total average clearance (0.52±0.10) mm. The adhesive clearance can be controlled to the level of 0.5 mm when the joining part of the artificial teeth and the base was designed into the shape of retentional pins and the artificial dentition divided into 3 parts. We succeeded in using the CAD/ computer aided manufacturing (CAM) technology to fabricate the complete denture. Although the assembly precision of the dentition and the baseplate is not perfect, the results have proved that the technical routes are workable.

The Anterior Interosseus Artery Perforator Flap: Anatomical Dissections and Clinical Study

PubMed Central

Panse, Nikhil S; Joshi, Sheetal B; Sahasrabudhe, Parag B; Bahetee, B; Gurude, Pradnya; Chandanwale, Ajay

2017-01-01

BACKGROUND Reconstruction of upper extremity deformities continues to be a challenge to the reconstructive surgeon. Various loco regional, distant and free flaps are available for reconstruction. However, each has its own set of advantages and disadvantages. Of the commonly performed local flaps, radial artery forearm flap, and the posterior interosseus artery flap stand out prominently. Recently, perforator propeller flaps have been used for resurfacing the upper extremity. The anterior interosseus artery perforator flap is an uncommonly used and described flap. METHODS This study was divided into anatomical study and clinical application in a IV level of evidence. In the anatomical study, five upper extremities were studied. Clinically, 12 patients underwent reconstruction using the anterior interosseus artery perforator flap. Flaps were performed by a single surgeon. A retrospective review of these cases from November 2008 to May 2014 is presented. RESULTS The anterior interosseus artery perforator was identified in four out of five cadaver limbs. The septocutaneous perforator was in the fifth extensor compartment around 4 cm proximal to the wrist joint. Of the twelve flaps, there was complete necrosis in one flap, and partial necrosis in one flap. The patient with complete necrosis underwent skin grafting at a later date. The wound healed secondarily in case of partial flap necrosis. CONCLUSION Anterior interosseus artery perforator flap must be considered as an important reconstructive option in the armamentarium of the plastic surgeon, while managing hand and wrist defects. PMID:28713704

Essentials of Endodontic Microsurgery

DTIC Science & Technology

2010-04-01

protocol is divided into regional and local injections and are as follows: 1. The administration of a long-acting anesthetic agent such as bupivicaine (Mar...mandibular anterior teeth receive bilateral mental nerve blocks. All of these can be supplemented, as need be, with corresponding palatal or lingual...infiltrations of the same anesthetic . In studies examining the effectiveness of lidocaine versus bupivicaine, it was shown that lidocaine was faster in

Bond Potential of Lithium Disilicate to Heat-Cured Polymethylmethacrylate (PMMA)

DTIC Science & Technology

2016-06-07

Restitution of maxillary anterior esthetics with all-ceramic components. International Dental Journal , 52(1): 47-56. Albarky M, Guazzato M, Swain MV...2004). An introduction to silanes and their clinical applications in dentistry. The International Journal of Prosthodontics, 17(2): 155-164...autopolymerizing denture resin and light cured composite resin to denture teeth. International Dental Journal , 52(1): 20-24. Zarb GA and Bolender

Severe maxillary osteomyelitis in a Gray Wolf (Canis lupus)

USGS Publications Warehouse

Barber-Meyer, Shannon

2012-01-01

Dental injuries to or abnormalities in functionally important teeth and associated bones in predators may significantly reduce the ability to kill and consume prey (Lazar et al. 2009). This impairment is likely exacerbated in coursing predators, such as Gray Wolves, that bite and hold onto fleeing and kicking prey with their teeth. Damage to carnassials (upper fourth premolar, P4, and lower first molar, M1) and associated bones in Gray Wolves may especially inhibit the consumption of prey because these teeth slice meat and crush bone. Here I report maxillary osteomyelitis involving the carnassials in a wild Gray Wolf from northeastern Minnesota of such severity that I hypothesize it ultimately caused the Gray Wolf to starve to death.

Comparative study between conventional en-masse retraction (sliding mechanics) and en-masse retraction using orthodontic micro implant.

PubMed

Basha, Asim Ghouse; Shantaraj, Ravi; Mogegowda, Shivalinga B

2010-04-01

The purpose of this study was to measure and compare the difference between rate of en-masse retraction with mini-implant and molar anchorage. A comparative study consisting of 14 patients (all females) randomized into 2 groups. Seven in group I (nonimplant) molar was used as anchor for en-masse retraction of anterior teeth (mean age 16 years SD +/- 1.41). In group II (implant), mini-implant was used as anchorage to retract the anterior teeth (mean age 17.36 SD +/- 1.35). In both groups, all first premolars were extracted. After leveling and aligning, surgical steel mini-implant of 1.3 mm in diameter and 8 mm in length were placed between the roots of second premolar and first molar in the maxilla in the implant group. Implants were immediately loaded with 2 N of force. In nonimplant group molar was used as anchorage. The retraction and postretraction lateral cephalograms were taken. Rate of retraction and anchor loss were measured by using pterygoid vertical in maxilla. Four implants became loose during the treatment, which were subsequently replaced. The stability of surgical steel in this study was 71.4%. Student t test were used to analyze the treatment charges in 2 groups. Mean anchor loss in maxilla in nonimplant group. No differences in the mean rate of retraction time were noted in both groups. Mini-implants provided absolute anchorage in patients requiring maximum anterior retraction. No differences in the mean retraction time were noted between 2 groups.

Clinical measurement of the height of the interproximal contact area in maxillary anterior teeth.

PubMed

Sghaireen, Mohd G; Al-Zarea, Bader K; Al-Shorman, Hisham M; Al-Omiri, Mahmoud K

2013-11-01

To clinically quantify the apicoincisal height of interproximal areas directly in patients' mouths. Thirty participants (11 females and 9 males, mean age=26±1.5 years) were recruited into this study. Measurement of interproximal contact areas was carried out directly in patients' mouths using digital caliper (TERENSA, USA) with measuring accuracy of 0.01 mm. The interproximal contact areas that were measured are: central incisor to central incisor, central incisor to lateral incisor, lateral incisor to canine, and canine to first premolar on both sides of the jaw. Statistical significance was based on probability values less than 0.05 (p<0.05). The largest contact point was the one present between central incisors and it ranged from 2.9 to 6.5 mm. On the other hand, the contact point between canine and first premolar was the smallest on both sides of the arch and ranged from 0.6 to 2.5 mm. The dimensions of the contact points declined as we move from anterior area backwards. Statistical analysis using t-test showed that there were significant differences between the measurements of interproximal points of each tooth (P<0.05). the apicogingival dimension of the contact point decreased as we moved from anterior to posterior teeth. The contact area between the central incisors was largest and the one between canine and premolar was the smallest. This study is the first to report direct intra-oral clinical measurement of contact points. Clinical evaluation of contact point dimensions using digital caliber is a viable, quick and accurate method to use.

The impact of kiddy dentures on maxillary arch growth.

PubMed

Shih, Wen-Yu; Wu, Fu-Ya

2016-09-01

Kiddy dentures are used to restore the self-confidence, chewing function, and pronunciation of children or when a care provider is concerned about the loss of incisor teeth. However, most studies to date have investigated normal dental arch development, and only a few have explored the effect of kiddy dentures on upper arch development. Fourteen Taiwanese children (7 male and 7 female) who were wearing kiddy dentures due to the loss of their upper anterior teeth were enrolled in this study. Inclusion criteria were the premature loss of maxillary incisors, the patient wearing kiddy dentures with both upper primary first molars as abutments, and the patient having complete records allowing a full longitudinal clinical follow-up. Dental casts were obtained immediately (T1), at 6 months (T2), and at 12 months (T3) after delivery of the kiddy dentures. The measured parameters included intercanine width (ICW, C1 to C2), interfirst molar width (IDW, D1 to D2), and intersecond molar width (IEW, E1 to E2). All the measurements were performed by one experienced examiner using a vernier caliper. The mean ages of the enrolled children for the periods T1, T2, and T3 were 43.8 ± 8.3 months, 50.6 ± 8.5 months, and 56.7 ± 8.4 months, respectively. There was no significant difference in gender when ICW, IDW, and IEW were compared. The mean changes in ICW values were 23.6 ± 6.2 mm, 24.2 ± 5.9 mm, and 24.6 ± 6.4 mm for T1, T2, and T3, respectively. There were statistically significant differences between T1 and T2, T2 and T3, and T1 and T3 for ICW (p < 0.05). The mean changes in IDW were 25.7 ± 8.4 mm, 25.8 ± 9.0 mm, and 25.8 ± 9.1 mm for T1, T2, and T3, respectively. There was no statistically significant difference between T1 and T2, T2 and T3, and T1 and T3. The mean changes in IEW were 30.6 ± 10.1 mm, 31.2 ± 8.8 mm, and 31.3 ± 8.2 mm for T1, T2, and T3, respectively. There was statistical significance between T1 and T2 or T1 and T3 for IDW (p < 0.05). Kiddy dentures do interfere with the transverse growth of the dental arch over the abutment tooth area during a 1-year follow-up period. However the teeth adjacent to the confined abutments still show transverse growth. Copyright © 2016. Published by Elsevier Taiwan LLC.

An Ancient Gene Network Is Co-opted for Teeth on Old and New Jaws

PubMed Central

Fraser, Gareth J; Hulsey, C. Darrin; Bloomquist, Ryan F; Uyesugi, Kristine; Manley, Nancy R; Streelman, J. Todd

2009-01-01

Vertebrate dentitions originated in the posterior pharynx of jawless fishes more than half a billion years ago. As gnathostomes (jawed vertebrates) evolved, teeth developed on oral jaws and helped to establish the dominance of this lineage on land and in the sea. The advent of oral jaws was facilitated, in part, by absence of hox gene expression in the first, most anterior, pharyngeal arch. Much later in evolutionary time, teleost fishes evolved a novel toothed jaw in the pharynx, the location of the first vertebrate teeth. To examine the evolutionary modularity of dentitions, we asked whether oral and pharyngeal teeth develop using common or independent gene regulatory pathways. First, we showed that tooth number is correlated on oral and pharyngeal jaws across species of cichlid fishes from Lake Malawi (East Africa), suggestive of common regulatory mechanisms for tooth initiation. Surprisingly, we found that cichlid pharyngeal dentitions develop in a region of dense hox gene expression. Thus, regulation of tooth number is conserved, despite distinct developmental environments of oral and pharyngeal jaws; pharyngeal jaws occupy hox-positive, endodermal sites, and oral jaws develop in hox-negative regions with ectodermal cell contributions. Next, we studied the expression of a dental gene network for tooth initiation, most genes of which are similarly deployed across the two disparate jaw sites. This collection of genes includes members of the ectodysplasin pathway, eda and edar, expressed identically during the patterning of oral and pharyngeal teeth. Taken together, these data suggest that pharyngeal teeth of jawless vertebrates utilized an ancient gene network before the origin of oral jaws, oral teeth, and ectodermal appendages. The first vertebrate dentition likely appeared in a hox-positive, endodermal environment and expressed a genetic program including ectodysplasin pathway genes. This ancient regulatory circuit was co-opted and modified for teeth in oral jaws of the first jawed vertebrate, and subsequently deployed as jaws enveloped teeth on novel pharyngeal jaws. Our data highlight an amazing modularity of jaws and teeth as they coevolved during the history of vertebrates. We exploit this diversity to infer a core dental gene network, common to the first tooth and all of its descendants. PMID:19215146

Smile attractiveness. Self-perception and influence on personality.

PubMed

Van der Geld, Pieter; Oosterveld, Paul; Van Heck, Guus; Kuijpers-Jagtman, Anne Marie

2007-09-01

To investigate self-perception of smile attractiveness and to determine the role of smile line and other aspects correlated with smile attractiveness and their influence on personality traits. Participants judged their smile attractiveness with a patient-specific questionnaire. The questionnaire contained a spontaneous smiling photograph of the participant. Objective smile-line height was measured using a digital videographic method for smile analysis. Personality was assessed with the Dutch Personality Index. Cronbach's alpha for the smile judgment questionnaire was .77. The results showed that size of teeth, visibility of teeth, and upper lip position were critical factors in self-perception of smile attractiveness (social dimension). Color of teeth and gingival display were critical factors in satisfaction with smile appearance (individual dimension). Participants, smiling with teeth entirely displayed and some gingival display (two to four millimeters), perceived their smile line as most esthetic. Smiles with disproportional gingival display were judged negatively and correlated with the personality characteristics of neuroticism and self-esteem. Visibility and position of teeth correlated with dominance. The results of this research underpin the psychosocial importance and the dental significance of an attractive smile.

Efficacy of chlorhexidine as a final irrigant in one-visit root canal treatment: a prospective comparative study.

PubMed

Miçooğullar Kurt, S; Çalışkan, M K

2018-03-30

To evaluate postoperative pain and radiographic evidence of periapical healing in teeth with apical periodontitis treated in one visit with an additional final irrigation using 2% chlorhexidine (CHX) and to compare the results with conventional two-visit root canal treatment (RCT) with an intracanal calcium hydroxide (CH) dressing as a control group. Ninety asymptomatic maxillary anterior teeth with periapical lesions were treated by a single operator. Root canals were prepared using the step-back technique with manual instrumentation with 2.5% NaOCl and 5% EDTA as irrigants. Half of the teeth were randomly assigned to the one-visit (OV) group and received an additional final rinse with 2% CHX before canal filling. The other teeth were treated in two visits (TV) with a CH paste made by mixing CH powder and distilled water as an interappointment dressing. All patients were recalled and investigated clinically and radiographically for 24 months. Postoperative pain at 24-48 h and changes in apical bone density indicating radiographic healing were evaluated statistically using the Mann-Whitney U-test followed by the Friedman and the Wilcoxon tests (α = 0.05). There were no significant differences between two groups regarding the incidence of postoperative pain at 24 h (OV group 50% no pain, 47.6% mild, 2.4% moderate pain/TV group 55% no pain, 42.5% mild, 2.5% moderate pain) and at 48 h (OV group 95% no pain, 5% mild pain/TV group 98% no pain, 2% mild pain). None of the patients reported severe postoperative pain, swelling and/or flare-ups during the follow-up period. There was no significant difference in the radiographic healing rates (OV group 97.6% PAI 1 and/or PAI 2 and 2.4% PAI 3/TV group 95% PAI 1 and/or PAI 2 and 5% PAI 3; P > 0.05). Both groups provided favourable and similar postoperative pain and periapical healing rates at 24 months. Thus, one-visit RCT with a final rinse with 2% CHX is an acceptable alternative to two-visit RCT with CH as temporary dressing in maxillary anterior teeth. © 2018 International Endodontic Journal. Published by John Wiley & Sons Ltd.

An alternative technique in the treatment of anterior cross bite in a case of Nickel allergy: a case report.

PubMed

Giancotti, A; Mozzicato, P; Mampieri, G

2011-03-01

The objective of this paper is to show an alternative use of an Essix based appliance in the treatment of anterior single-tooth crossbite malocclusion in a patient with Nickel allergy. Anterior crossbite malocclusion of one or more teeth, without posterior crossbite association, is a relatively frequent condition both in the mixed and the permanent dentition. This kind of malocclusion is usually treated with either fixed or removable appliances. The use of preformed Essix appliances could be an alternative to traditional removable and fixed orthodontic devices in patients with Nickel allergy as well as in every patient. The treatment was successfully completed in 12 weeks, the anterior single tooth crossbite was corrected using three full arch Essix-based appliances planned on the set-up casting, providing a gradual vestibular movement. Patient compliance was requested in order to provide the planned dental movement. The Essix appliance can be successfully used to correct a single-tooth crossbite even in allergic subjects in a short time with patient cooperation.