Soft tissue changes following extraction vs. nonextraction orthodontic fixed appliance treatment: a systematic review and meta-analysis.

PubMed

Konstantonis, Dimitrios; Vasileiou, Dimitrios; Papageorgiou, Spyridon N; Eliades, Theodore

2018-06-01

The aim of this systematic review was to assess the effect of systematic extraction protocols during orthodontic fixed appliance treatment on the soft tissue profile of human patients. Nine databases were searched until December 2016 for controlled clinical studies including premolar extraction or nonextraction treatment. After elimination of duplicate studies, data extraction, and risk-of-bias assessment according to the Cochrane guidelines, random-effects meta-analyses of mean differences (MD) or standardized mean differences (SMD) and their 95% CIs were performed, followed by subgroup, meta-regression, and sensitivity analyses. Extraction treatment was associated with increased lower lip retraction (24 studies; 1,456 patients; MD = 1.96 mm), upper lip retraction (21 studies; 1,149 patients; MD = 1.26 mm), nasolabial angle (21 studies; 1,089 patients; MD = 4.21°), soft-tissue profile convexity (six studies; 408 patients; MD = 1.24°), and profile pleasantness (three studies; 249 patients; SMD = 0.41). Patient age, extraction protocol, and amount of upper incisor retraction during treatment were significantly associated with the observed extraction effects, while the quality of evidence was very low in all cases due to risk of bias, baseline confounding, inconsistency, and imprecision. Although tooth extractions seem to affect patient profile, existing studies are heterogenous and no consistent predictions of profile response can be made. © 2018 Eur J Oral Sci.

Root resorption of maxillary incisors retracted with and without skeletal anchorage.

PubMed

Barros, Sérgio Estelita; Janson, Guilherme; Chiqueto, Kelly; Baldo, Vitor Oliveira; Baldo, Taiana Oliveira

2017-02-01

Our objective was to compare root resorption degree of the maxillary central incisors retracted with and without skeletal anchorage. This nonrandomized historical control study included 37 patients requiring maximum anterior retraction and treated with extraction of 2 maxillary premolars. Group 1 consisted of 22 patients (11 male, 11 female) in whom anterior retraction was performed without skeletal anchorage, and group 2 included 15 patients (3 male, 12 female) treated with skeletally anchored anterior retraction. Periapical radiographs were used to evaluate root resorption degree by a scoring system. The groups were compared regarding the resorption score and resorption degree distribution with the Mann-Whitney U test, chi-square test, and Z test on proportions. There was no statistically significant intergroup difference regarding root resorption, but the number of patients with severe and extreme root resorption degrees was significantly greater in group 2. Although the root resorption degree of the skeletal anchorage group was not significantly different from the group without skeletal anchorage, the number of patients with severe to extreme resorption in the first group was significantly greater. Therefore, careful clinical monitoring of skeletally anchored anterior retraction is needed, especially when there are known root resorption predisposing factors. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Quantitative and qualitative assessment of anchorage loss during en-masse retraction with indirectly loaded miniscrews in patients with bimaxillary protrusion.

PubMed

Monga, Nitika; Kharbanda, Om Prakash; Samrit, Vilas

2016-08-01

This study provides vital insight in assessing anchorage loss when miniscrews are indirectly loaded. The study sample comprised 18 patients with bimaxillary protrusion (14 girls, 4 boys; mean age, 17.3 ± 4.6 years) selected from a database of 89 patients treated with miniscrews. All subjects who were selected required extraction of all first premolars and maximum anchorage. After initial leveling and aligning, miniscrews were placed between the first molar and the second premolar in all 4 quadrants and loaded by the indirect method at 3 weeks after placement with 200-g nickel-titanium alloy closed-coil springs for en-masse retraction. Mean treatment duration was 29.7 ± 6.8 months. Pretreatment and posttreatment lateral cephalograms were analyzed to measure the amount of anchorage loss, incisor retraction, and the incisors' angular change in reference to the pterygoid vertical reference line and were evaluated by the structural superimposition method. The ratio of incisor retraction to molar protraction was 4.2 in the maxilla and 4.7 in the mandible. The first molars showed mean extrusion of 0.20 mm in the maxilla and 0.57 mm in the mandible; these were statistically insignificant. The mean angular change of the first molars was -2.43° in the maxilla and -0.03° in the mandible. The mean anchorage loss in reference to the pterygoid vertical was 1.3 mm in the maxilla and 1.1 mm in the mandible; these were statistically significant. Structural superimpositions showed mean change in molar position of 0.83 mm in the maxilla and 0.87 mm in the mandible, and 5.77 mm in the maxillary incisor and 5.43 mm in the mandibular incisor. These results were compared with the direct anchorage method reported in the literature. Indirect miniscrew anchorage can be a viable alternative to direct anchorage. Copyright © 2016. Published by Elsevier Inc.

Orthodontic treatment of an anterior openbite with the aid of corticotomy procedure: Case report

PubMed Central

Aljhani, Ali S.; Aldrees, Abdullah M.

2010-01-01

This case report illustrates the orthodontic treatment combined with the corticotomy technique in an adult patient to accelerate tooth movement and shorten the treatment time. The patient was a 22-year-old woman with an anterior open bite and flared and spaced upper and lower incisors. First, fixed orthodontic appliances (bidimensional edgewise brackets) were bonded, and a week later buccal and lingual corticotomy with alveolar augmentation procedure in the maxillary arch from the first molar to the contralateral first molar, and from canine to canine in the mandibular arch was performed. Orthodontic therapy proceeded with frequent activation of the appliances to retract the incisors every 2 weeks. The total treatment time was 5 months and no adverse effects were observed at the end of active treatment. The addition of the decortication procedure to the conventional orthodontic therapy decreased the duration of treatment significantly. Successful closure of the anterior open bite with adequate overbite and interdigitation of the teeth were achieved. PMID:24151417

Orthodontic treatment of an anterior openbite with the aid of corticotomy procedure: Case report.

PubMed

Aljhani, Ali S; Aldrees, Abdullah M

2011-04-01

This case report illustrates the orthodontic treatment combined with the corticotomy technique in an adult patient to accelerate tooth movement and shorten the treatment time. The patient was a 22-year-old woman with an anterior open bite and flared and spaced upper and lower incisors. First, fixed orthodontic appliances (bidimensional edgewise brackets) were bonded, and a week later buccal and lingual corticotomy with alveolar augmentation procedure in the maxillary arch from the first molar to the contralateral first molar, and from canine to canine in the mandibular arch was performed. Orthodontic therapy proceeded with frequent activation of the appliances to retract the incisors every 2 weeks. The total treatment time was 5 months and no adverse effects were observed at the end of active treatment. The addition of the decortication procedure to the conventional orthodontic therapy decreased the duration of treatment significantly. Successful closure of the anterior open bite with adequate overbite and interdigitation of the teeth were achieved.

Alveolar Bone Housing- A Modified Wilkodontics Approach- A Case Report

PubMed Central

Sanjay, Kothamachu; Bhongade, ML; Shrivastav, Sunita

2016-01-01

Accelerated orthodontic treatment is the need of the hour in current scenario as the conventional orthodontics is time taking. Corticotomy assisted orthodontics have been used for years to reduce the treatment duration by reducing the resistance provided by alveolar bone housing. This case report describes the orthodontic treatment combined with the modification in conventional wilkodontic technique in a patient to accelerate tooth movement and shorten the treatment time with an anterior open bite and flared and spaced upper and lower incisors. Firstly plaque control was achieved with supra and subgingival scaling. A modified approach using periodontal access flap followed by vertical bone cuts in the cortical bone from the crest of the alveolar bone margin to 2mm-3mm below the apices of all the anterior teeth extending from upper left canine to upper right canine were performed. These vertical cuts were joined by horizontal cuts apically and flap repositioned. An MBT 0.018 inch appliance was bonded. Orthodontic therapy proceeded with frequent activation of the appliances to retract the incisors every two weeks. The total treatment time was four and half months with active period of two months and no adverse effects were observed at the end of active treatment. The modified decortication technique reduced the treatment time to a considerable extent. The interdental spacing closed and optimum overjet and overbite was achieved. PMID:27656577

Orthodontic Treatment of Maxillary Incisors with Severe Root Resorption Caused by Bilateral Canine Impaction in a Class II Division 1 Patient.

PubMed

Chang, Na-Young; Park, Jae Hyun; Lee, Mi-Young; Cho, Jin-Woo; Cho, Jin-Hyoung; An, Ki-Yong; Chae, Jong-Moon

2016-01-01

This case report shows the successful alignment of bilateral impacted maxillary canines. A 12-year-old male with the chief complaint of the protrusion of his maxillary anterior teeth happened to have bilateral maxillary canine impaction on the labial side of his maxillary incisors. Four maxillary incisors showed severe root resorption because of the impacted canines. The patient was diagnosed as skeletal Class II malocclusion with proclined maxillary incisors. The impacted canine was carefully retracted using sectional buccal arch wires to avoid further root resorption of the maxillary incisors. To distalize the maxillary dentition, two palatal miniscrews were used. After 25 months of treatment, the maxillary canines were well aligned without any additional root resorption of the maxillary incisors.

Gingival Zenith Positions and Levels of Maxillary Anterior Dentition in Cases of Bimaxillary Protrusion: A Morphometric Analysis.

PubMed

Gowd, Snigdha; Shankar, T; Chatterjee, Suravi; Mohanty, Pritam; Sahoo, Nivedita; Baratam, Srinivas

2017-08-01

To investigate the two clinical parameters, such as gingival zenith positions (GZPs) and gingival zenith levels (GZLs), of maxillary anterior dentition in bimaxillary protrusion cases and collate it with severiety of crown inclination. Gingival zenith position and GZL in 40 healthy patients (29 females and 11 males) with an average age of 21.5 years were assessed. Inclusion criteria involved absence of periodontal diseases, Angle's class I molar relationship, and upper anterior proclination within 25 to 45° based on Steiner's analysis; exclusion criteria included spacing, crowding, anterior restoration and teeth with incisor attrition or rotation. The GZP was evaluated using digital calipers from voxel-based morphometry (VBM), and GZL was assessed from the tangent drawn from GZP of central incisor and canines to the linear vertical distance of GZP of lateral incisor. All the central incisors showed a GZP distal to VBM with a mean average of 1 mm. Severe proclination between 40 and 45° showed a statistically significant variation. Lateral incisors displayed a mean of 0.5 mm deviation of GZP from the vertically bisected midline. In 80% of canine population, GZP was centralized. We conclude that the degree of proclination of maxillary anterior dentition was correlated to the gingival contour in bimaxillary cases. The investigation revealed that there is a variation in the location of GZP as the severity of proclination increases. This study highlights the importance of microesthetics in fixed orthodontic treatment. The gingival contour should be unaltered while retraction during management of bimaxillary protrusion.

Skeletal anchorage for orthodontic correction of severe maxillary protrusion after previous orthodontic treatment.

PubMed

Tanaka, Eiji; Nishi-Sasaki, Akiko; Hasegawa, Takuro; Nishio, Clarice; Kawai, Nobuhiko; Tanne, Kazuo

2008-01-01

The correction of a severe maxillary protrusion in an adult by distal movement of the maxillary molars has been one of the most difficult biomechanical problems in orthodontics. This article reports on the treatment of an adult case of severe maxillary protrusion and a large overjet treated with a skeletal anchorage system. A female patient, age 22 years and 3 months, complained of the difficulty of lip closure due to severe maxillary protrusion with a gummy smile. Overjet and overbite were +7.6 mm and -0.9 mm, respectively. She had a history of orthodontic treatment in which her maxillary first premolars were extracted. In order to conduct distal movement of the maxillary molars, anchor plates were placed in the zygomatic process. After achieving a Class I molar relationship, retraction and intrusion of the maxillary incisors were performed. After a 2-year treatment, an acceptable occlusion was achieved with a Class I molar relationship. Her convex facial profile with upper lip protrusion was considerably improved, and the lips showed less tension in lip closure. After a 2-year retention period, an acceptable occlusion was maintained without recurrence of maxillary protrusion, indicating a stability of the occlusion. The result of this treatment indicated that skeletal anchorage is of great importance as a remedy for achieving intrusion and retraction of the maxillary incisors in cases of severe maxillary protrusion with a patient who had previous orthodontic treatment.

Versatile retraction mechanics: Implant assisted en-masse retraction with a boot loop.

PubMed

Philip, Pramod; Jose, Nidhin Philip

2015-03-01

The purpose of this paper is to explain the versatility offered by the use of arch wires with boot loops in retraction mechanics while taking direct anchorage from mini-screws. The materials include the mini screws placed at the appropriate location and retraction arches made of 0.019 X 0.025 SS with boot loops placed distal to the lateral incisors. Mini screw provides a stable anchorage for enmasse retraction of the anterior teeth with the help of a boot loop using sliding and/or loop mechanics. The arch wires with boot loops have a definite advantage over the soldered/crimpable hooks because of the versatility it offers during the process of retraction. An innovative approach combining the advantages of absolute anchorage using mini implants and a retraction arch with boot loop is presented here.

Multiple extraction patterns in severe discrepancy cases.

PubMed

Anderson, B D

1975-10-01

Thirty-five cases have been collected from colleagues which illustrate that removal of additional maxillary teeth, following first bicuspid extractions, can allow the successful resolution of difficult discrepancy and anchorage cases. Charts 1 and 2 describe the amounts of space that might be expected by removal of additional upper bicuspids, upper first molars, and upper second molars. The findings on upper second molars are admittedly limited. Anchorage values as expressed by an efficiency percentage were approximately what would be expected from a study of anchorage values of the roots of teeth. The removal of upper second bicuspids has a better anchorage efficiency potential than the upper first molar, but this may be overcome somewhat by the greater size of the molar. Clear guidance cannot be given as to which teeth to remove in a specific case, but it is the observation of the author that for cases that are still in full Class II following four bicuspid space closure, upper second bicuspid removal would be more helpful from an anchorage perspective, whereas for cases that are in end-to-end molar relationship or require only a few millimeters to move into Class I, the upper first molar might be the tooth of choice. Also, the supper first molar removal allows for a more "normal" appearing arch assuming normal alignment and size of the upper second and third molars. The comparison with the nonextraction control group showed an enormous difference in the amount of incisor retraction that extractions provide when related to the maxilla. The nonextraction control group, though experiencing dramatic correction of Class II relationships, showed no incisor movement within the maxilla. Some problems which appeared in the sample were described. Removal of upper teeth in addition to the four first bicuspids can be a solution to an occasional anchorage, skeletal, growth or cooperation problem.

Comparative Study on the Efficacy of Gingival Retraction using Polyvinyl Acetate Strips and Conventional Retraction Cord - An in Vivo Study.

PubMed

Shivasakthy, M; Asharaf Ali, Syed

2013-10-01

A new material is proposed in dentistry in the form of strips for producing gingival retraction. The clinical efficacy of the material remains untested. This study aimed to determine whether the polyvinyl acetate strips are able to effectively displace the gingival tissues in comparison with the conventional retraction cord. Complete metal ceramic preparation with supra-gingival margin was performed in fourteen maxillary incisors and gingival retraction was done using Merocel strips and conventional retraction cords alternatively in 2 weeks time interval. The amount of displacement was compared using a digital vernier caliper of 0.01mm accuracy. RESULTS were analyzed statistically using Paired students t-test. The statistical analysis of the data revealed that both the conventional retraction cord and the Merocel strip produce significant retraction. Among both the materials, Merocel proved to be significantly more effective. Merocel strip produces more gingival displacement than the conventional retraction cord.

Comparative Study on the Efficacy of Gingival Retraction using Polyvinyl Acetate Strips and Conventional Retraction Cord – An in Vivo Study

PubMed Central

Shivasakthy, M.; Asharaf Ali, Syed

2013-01-01

Statement of Problem: A new material is proposed in dentistry in the form of strips for producing gingival retraction. The clinical efficacy of the material remains untested. Purpose of the Study: This study aimed to determine whether the polyvinyl acetate strips are able to effectively displace the gingival tissues in comparison with the conventional retraction cord. Material and Methods: Complete metal ceramic preparation with supra-gingival margin was performed in fourteen maxillary incisors and gingival retraction was done using Merocel strips and conventional retraction cords alternatively in 2 weeks time interval. The amount of displacement was compared using a digital vernier caliper of 0.01mm accuracy. Results were analyzed statistically using Paired students t-test. Results: The statistical analysis of the data revealed that both the conventional retraction cord and the Merocel strip produce significant retraction. Among both the materials, Merocel proved to be significantly more effective. Conclusion: Merocel strip produces more gingival displacement than the conventional retraction cord. PMID:24298531

Apical root resorption in orthodontically treated adults.

PubMed

Baumrind, S; Korn, E L; Boyd, R L

1996-09-01

This study analyzed the relationship in orthodontically treated adults between upper central incisor displacement measured on lateral cephalograms and apical root resorption measured on anterior periapical x-ray films. A multiple linear regression examined incisor displacements in four directions (retraction, advancement, intrusion, and extrusion) as independent variables, attempting to account for observed differences in the dependent variable, resorption. Mean apical resorption was 1.36 mm (sd +/- 1.46, n = 73). Mean horizontal displacement of the apex was -0.83 mm (sd +/- 1.74, n = 67); mean vertical displacement was 0.19 mm (sd +/- 1.48, n = 67). The regression coefficients for the intercept and for retraction were highly significant; those for extrusion, intrusion, and advancement were not. At the 95% confidence level, an average of 0.99 mm (se = +/- 0.34) of resorption was implied in the absence of root displacement and an average of 0.49 mm (se = +/- 0.14) of resorption was implied per millimeter of retraction. R2 for all four directional displacement variables (DDVs) taken together was only 0.20, which implied that only a relatively small portion of the observed apical resorption could be accounted for by tooth displacement alone. In a secondary set of univariate analyses, the associations between apical resorption and each of 14 additional treatment-related variables were examined. Only Gender, Elapsed Time, and Total Apical Displacement displayed statistically significant associations with apical resorption. Additional multiple regressions were then performed in which the data for each of these three statistically significant variables were considered separately, with the data for the four directional displacement variables. The addition of information on Elapsed Time or Total Apical Displacement did not explain a significant additional portion of the variability in apical resorption. On the other hand, the addition of information on Gender to the information on the four directional displacement variables yielded an R2 value of 0.35, which indicated that these variables taken together could account for approximately a third of the observed variability in apical resorption in this sample.

[Effect of dental arch length decrease during orthodontic treatment in the upper airway development. A review].

PubMed

Haddad, Stéphanie; Kerbrat, Jean-Baptiste; Schouman, Thomas; Goudot, Patrick

2017-03-01

A possible relation between an upper airway space decrease and the development of obstructive sleep apnea syndrom explains the importance to know the effect of the modification of dental arch length on the upper airway during orthodontic treatment. The aim of this article is to expose recent knowledge about upper airway development and dental arch length decrease factors, to determine the influence of this decrease on upper airway development. A review was done to determine the upper airway normal development, to define dental arch to specify if an ideal position of dental arch on apical base exists. All of the length dental arch decrease factors during orthodontic treatment (dental extraction, dental agenesis and dental malpositions) and their upper airway resounding were searched. Some authors found a diminution of upper airway space after premolars extractions while others didn't found this diminution after extractions premolars when incisor retraction is finished. A decrease of transversal maxillary diameter and nasal cavity may be due to absence of permanent teeth. The effect of dental arch length decrease during orthodontic treatment in the upper airway development was not scientifically proved. However we had to be vigilant and adapt our orthodontic treatment case by case to avoid an upper airway modification. © EDP Sciences, SFODF, 2017.

Torque Control During Intrusion on Upper Central Incisor in Labial and Lingual bracket System - A 3D Finite Element Study.

PubMed

Pol, Tejas R; Vandekar, Meghna; Patil, Anuradha; Desai, Sanjana; Shetty, Vikram; Hazarika, Saptarshi

2018-01-01

The aim of present study was to investigate the difference of torque control during intrusive force on upper central incisors with normal, under and high torque in lingual and labial orthodontic systems through 3D finite element analysis. Six 3D models of an upper right central incisor with different torque were designed in Solid Works 2006. Software ANSYS Version 16.0 was used to evaluate intrusive force on upper central incisor model . An intrusive force of 0.15 N was applied to the bracket slot in different torque models and the displacements along a path of nodes in the upper central incisor was assessed. On application of Intrusive force on under torqued upper central incisor in Labial system produce labial crown movement but in Lingual system caused lingual movement in the apical and incisal parts. The same intrusive force in normal-torqued central incisor led to a palatal movement in apical and labial displacement of incisal edge in Lingual system and a palatal displacement in apical area and a labial movement in the incisal edge in Labial systemin. In overtorqued upper central incisor, the labial crown displacement in Labial system is more than Lingual system. In labial and lingual system on application of the same forces in upper central incisor with different inclinations showed different responses. The magnitudes of torque Loss during intrusive loads in incisors with normal, under and over-torque were higher in Labial system than Lingual orthodontic appliances. Key words: FEM, lingual orthodontics, intrusion, torque control, labial bracket systems.

Overjet and overbite analysis during the eruption of the upper permanent incisors.

PubMed

Cuoghi, Osmar A; Sella, Rodrigo C; Mamede, Igo; de Macedo, Fernanda A; Miranda-Zamalloa, Yésselin M; de Mendonça, Marcos R

2009-01-01

ABSTRACT The purpose of this study was to analyze the overjet and overbite behavior during eruption of the upper permanent incisors. Fourth-eight plaster casts of 16 patients from ages 6-13 years were appraised longitudinally. It was found that the overjet remains constant, starting at the eruption of the upper permanent central incisors until eruption of the upper permanent canine teeth, while the overbite increases after eruption of the upper permanent lateral incisors and remains constant with the eruption of the canine teeth.

[Aesthetic evaluation of nasolabial angle alteration on the soft tissue profile of skeleton class I].

PubMed

Xu, Anxiu; Deng, Feng; Wang, Fenfen; Zhang, Xiangfeng; Zhang, Yi

2015-10-01

To study the influence of nasolabial angle alteration on facial profile attractiveness and investigate the perception differences in profile attractiveness among laypeople. A young Chinese female with normal hard and soft tissue cephalometric values was chosen as a research object. Profile photograph was taken in a natural head position. Photoshop software was chosen to rotate the nose tip and upper lip, thus changing the degree and direction of nasolabial angle. A total of 33 different profile pictures were achieved. Thirty-three professional orthodontists and 64 non-professionals were chosen to score these 33 pictures. When the upper lip position was fixed, the profile was considerably attractive because the angle of nasal tip was not changed or altered. When the nasal tip rotation angle was fixed, profiles with a retroclined upper lip were considered significantly attractive by the layperson and professional groups. Regardless of the direction of the nasal tip rotation, the respondents considered the profile with a retroclined upper lip highly attractive. The soft tissue profile with a retroclined upper lip looks considerably attractive in Chinese female populations. Therefore, during an orthodontic treatment, appropriate retraction of the incisor is recommended to improve soft tissue profile attractiveness.

Three-dimensional analysis using finite element method of anterior teeth inclination and center of resistance location.

PubMed

Geramy, Allahyar; Sodagar, Ahmad; Hassanpour, Mehdi

2014-01-01

To locate the centre of resistance of consolidated units of four and six anterior teeth during retraction. Twelve three-dimensional (3D) models were designed in SolidWorks of the anterior segment with four and six teeth and their supporting structure. A proper force system was applied in each model to retract the teeth bodily. The exact location of the centre of resistances (CRes) was determined. It was found that the path of CRes change in four-tooth and six-tooth units according to the anterior teeth torque. A posterior shift of the CRes by increasing the inclination of teeth was shown. However, vertical position has a fluctuant behaviour. First it moves apically, then it moves incisally. Furthermore, results suggest that in en masse retraction, translation can be achieved with a smaller amount of moment-to-force ratio than in four-incisor retraction. In other words, for bodily retraction of anterior incisor segments, we should apply force in a more apical position. Different anterior torques between 7 and 35 degrees, cannot affect the CRes position dramatically. The area of CRes shifting is 0.92 mm (anterioposteriorly) x 0.74 mm (superior-inferiorly) in the six-tooth unit in the teeth model and 0.85 mm (anterioposteriorly) x 0.82 mm (superior-inferiorly) in the teeth and bone model. In the four-tooth model, the area of CRes shifting is 0.97 mm (anterioposteriorly) x 0.93 mm (superior-inferiorly) in tooth model and 0.77 mm (anterioposteriorly) x 0.87 mm (superior-inferiorly) in the teeth and bone model.

[Finite element analysis of mechanical characteristics during retracting mandibular incisors through sliding mechanics].

PubMed

Gu, Yong-Jia; Wu, Yan-Ping; Gao, Mei-Qin; Yao, Ning; Chen, Wen-Jing

2008-10-01

To analyze the mechanical characteristic changes of teeth and arch under different loading direction during retracting mandibular incisors through implant, simulating clinical loading system. Three- dimensional finite element model, including brackets, archwire, crampable hooks and implants, was reconstructed. The force direction was determined by connecting the points in crampable hook and the center point of implant, and the force point and force direction were changed with the adjustment of the height of crampable hook and the height of implant. Then three-dimensional movement trend of teeth, stress distribution in periodontal membrane and the largest displacement of archwire nodes in each group were calculated and analyzed. SPSS13.0 software package was used for statistical analysis. It was found that the height of implant and the height of crampable hook were correlated with the movement of teeth and stress distribution in periodontal membrane (P<0.01). The movement trend of teeth in the condition of different height of implant and different height of crampable hook was illustrated as follows:(1)with the height increase of crampable hook, the movement trend of the central and lateral incisors varied from mesial lingual tipping to mesial labial tipping. However, canines tipped distally and lingually; the second premolars tipped mesially and lingually, and the first molar roots tipped distally and buccally with decreasing tipping angle. (2) The largest stress distribution in the whole arch was located in the labial apical one-third area of the lateral incisors, while that of canines and the first molars was located in the alveolar ridges and root bifurcations. These findings indicate that the different movement trend during retracting anterior teeth can be achieved through the adjustment of the height of crampable hook, and implant, anchorage can effectively control anterior movement of the posterior teeth. Supported by Research Fund of Bureau of Science and Technology of Nantong City (Grant No. S40023).

Transdisciplinary treatment of Class III malocclusion using conventional implant-supported anchorage: 10-year posttreatment follow-up

PubMed Central

Rinaldi, Mariana Roennau Lemos; Rizzatto, Susana Maria Deon; de Menezes, Luciane Macedo; Polido, Waldemar Daudt; de Lima, Eduardo Martinelli Santayanna

2015-01-01

INTRODUCTION: Combined treatment offers advantages for partially edentulous patients. Conventional implants, used as orthodontic anchorage, enable previous orthodontic movement, which provides appropriate space gain for crown insertion. OBJECTIVE: This case report describes the treatment of a 61-year and 10-month-old patient with negative overjet which made ideal prosthetic rehabilitation impossible, thereby hindering dental and facial esthetics. CASE REPORT: After a diagnostic setup, conventional implants were placed in the upper arch to anchor intrusion and retract anterior teeth. Space gain for lateral incisors was achieved in the lower arch by means of an orthodontic appliance. CONCLUSIONS: Integrated planning combining Orthodontics and Implantology provided successful treatment by means of conventional implant-supported anchorage. The resulting occlusal relationship proved stable after 10 years. PMID:26154459

Orthodontic-periodontic intervention of pathological migration of maxillary anterior teeth in advanced periodontal disease.

PubMed

Panchal, Anita H; Patel, Vasumati G; Bhavsar, Neeta V; Mehta, Hardik V

2013-05-01

This case report presents a female patient whose chief complaint was of mobile and palatally drifted upper left central incisor which led to malalignment of upper anterior teeth. Orthodontic treatment of upper left central incisor was done with the help of 'Z' spring for the alignment of the upper anterior teeth. It was followed by splinting of upper anterior teeth to improve the stability and masticatory comfort. Regenerative periodontal surgery with Decalcified freeze dried bone allograft was done in relation to upper left central incisor.

Conservative treatment of an ankylosed tooth after delayed replantation: a case report.

PubMed

Díaz, Jaime Andrés; Sandoval, Hector Paulo; Pineda, Patricia Irene; Junod, Pablo Antonio

2007-10-01

An 8-year-old boy sustained avulsion of his upper right maxillary central incisor and lateral luxation of his upper left maxillary incisors. Subsequently, the upper right maxillary central incisor developed replacement resorption, and both upper left maxillary incisors developed pulpal canal obliteration. In the ankylosed tooth, decoronation procedure was performed, and in the 44-month follow-up period the involved alveolar site showed vertical apposition of bone and continuing replacement resorption. Decoronation is a surgical procedure that allows preservation of the bone volume for the future, avoiding aesthetic disturbances and more aggressive treatments in cases where other therapeutic alternatives are not feasible.

[Relationship between crown form of upper central incisors and papilla filling in Chinese Han-nationality youth].

PubMed

Yang, X; Le, D; Zhang, Y L; Liang, L Z; Yang, G; Hu, W J

2016-10-18

To explore a crown form classification method for upper central incisor which is more objective and scientific than traditional classification method based on the standardized photography technique. To analyze the relationship between crown form of upper central incisors and papilla filling in periodontally healthy Chinese Han-nationality youth. In the study, 180 periodontally healthy Chinese youth ( 75 males, and 105 females ) aged 20-30 (24.3±4.5) years were included. With the standardized upper central incisor photography technique, pictures of 360 upper central incisors were obtained. Each tooth was classified as triangular, ovoid or square by 13 experienced specialist majors in prothodontics independently and the final classification result was decided by most evaluators in order to ensure objectivity. The standardized digital photo was also used to evaluate the gingival papilla filling situation. The papilla filling result was recorded as present or absent according to naked eye observation. The papilla filling rates of different crown forms were analyzed. Statistical analyses were performed with SPSS 19.0. The proportions of triangle, ovoid and square forms of upper central incisor in Chinese Han-nationality youth were 31.4% (113/360), 37.2% (134/360) and 31.4% (113/360 ), respectively, and no statistical difference was found between the males and females. Average κ value between each two evaluators was 0.381. Average κ value was raised up to 0.563 when compared with the final classification result. In the study, 24 upper central incisors without contact were excluded, and the papilla filling rates of triangle, ovoid and square crown were 56.4% (62/110), 69.6% (87/125), 76.2% (77/101) separately. The papilla filling rate of square form was higher (P=0.007). The proportion of clinical crown form of upper central incisor in Chinese Han-nationality youth is obtained. Compared with triangle form, square form is found to favor a gingival papilla that fills the interproximal embrasure space. The consistency of the present classification method for upper central incisor is not satisfying, which indicates that a new classification method, more scientific and objective than the present one, is to be found.

Reversed palatal perforation by upper incisors in ageing blind mole-rats (Spalax ehrenbergi)

PubMed Central

ZURI, I.; TERKEL, J.

2001-01-01

Blind mole-rats (Spalax ehrenbergi) are fossorial solitary rodents that present striking morphological, physiological and behavioural adaptations to the subterranean environment in which they live. Previous studies have shown that mole-rats are specialised in tooth-digging. The rapid eruption-rate of their incisors has evolved to compensate for their excessive wear by excavation. Males use their incisors more than females for digging and fighting, and their rate of incisor eruption is significantly more rapid than in females. Since mole-rats use their incisors for digging throughout the year, we suggest that continuous mechanical pressure on their oral tissues concentrated at the apical sites of the upper incisors leads to cell and tissue fatigue. We provide evidence for 5 stages of palatal perforation by the upper incisors at their apical sites, with maximum perforation characterising aged males. Interspecies comparisons with 7 other fossorial and semi-fossorial rodent species, and with beavers, which expose their incisors to enormous mechanical pressure, revealed that this palatal perforation is unique to the male mole-rat. We suggest that while the fast eruption rate of incisors in the mole-rat compensates for the rapid wear resulting from digging, evolutionary adaptation to continuous tooth-digging is still ongoing, since the physical pressure of digging at the apical sites of the upper incisors leads to tissue destruction, breakage of the palatal bone and possibly to death, as a result of maxillary inflammation. PMID:11760890

Influence of shovel-shaped incisors on the dental arch crowding in Mongolian females.

PubMed

Hasegawa, Yuh; Terada, Kazuto; Kageyama, Ikuo; Tsukada, Shin-ichi; Uzuka, Satoshi; Nakahara, Rizako; Nakahara, Sen

2009-08-01

The aim of this study was to investigate the influences of shovel-shaped incisors on the dental arch crowding in the samples of modern young female adult Mongolians (belonging to the Khalkha-Mogol grouping) ranged between 18.5 and 25.0 years, with a mean age of 20.7 years. Materials in this study comprised of 33 dental casts. Plaster replicas of the A.S.U. system plaques were used to facilitate standardization in scoring and classify shoveling regarding both upper central and lateral incisors. Dimensions of the dental arch namely, overjet, overbite, arch depth, arch width and irregularity index were measured. The correlation between the shovel shape of the central incisor and the lateral incisor was highly significant. Significantly relations were found between the grades of shoveling and the mesiodistal diameters of upper first molars and lower incisors. Positive correlation was admitted between the shoveling and upper arch depth anterior, and upper arch depth. It may be considered that the grades of shoveling are indirectly related with upper and/or lower anterior crowding. Although crowding is looks like an expression of disharmony between teeth and alveolar arch, it may be caused by multiple etiologic factors interacted directly and/or indirectly.

Vertical force and torque analysis during mechanical preparation of extracted teeth using hand ProTaper instruments.

PubMed

Glavičić, Snježana; Anić, Ivica; Braut, Alen; Miletić, Ivana; Borčić, Josipa

2011-08-01

The purpose was to measure and analyse the vertical force and torque developed in the wider and narrower root canals during hand ProTaper instrumentation. Twenty human incisors were divided in two groups. Upper incisors were experimental model for the wide, while the lower incisors for the narrow root canals. Measurements of the force and torque were done by a device constructed for this purpose. Differences between the groups were statistically analysed by Mann-Whitney U-test with the significance level set to P<0.05. Vertical force in the upper incisors ranged 0.25-2.58 N, while in the lower incisors 0.38-6.94 N. Measured torque in the upper incisors ranged 0.53-12.03 Nmm, while in the lower incisor ranged 0.94-10.0 Nmm. Vertical force and torque were higher in the root canals of smaller diameter. The increase in the contact surface results in increase of the vertical force and torque as well in both narrower and wider root canals. © 2010 The Authors. Australian Endodontic Journal © 2010 Australian Society of Endodontology.

Bovine Acellular Dermal Matrix for Levator Lengthening in Thyroid-Related Upper-Eyelid Retraction.

PubMed

Sun, Jing; Liu, Xingtong; Zhang, Yidan; Huang, Yazhuo; Zhong, Sisi; Fang, Sijie; Zhuang, Ai; Li, Yinwei; Zhou, Huifang; Fan, Xianqun

2018-05-02

BACKGROUND Eyelid retraction is the most common and often the first sign of thyroid eye disease (TED). Upper-eyelid retraction causes both functional and cosmetic problems. In order to correct the position of the upper eyelid, surgery is required. Many procedures have demonstrated good outcomes in mild and moderate cases; however, unpredictable results have been obtained in severe cases. Dryden introduced an upper-eyelid-lengthening procedure, which used scleral grafts, but outcomes were unsatisfactory. A new technique is introduced in this study as a reasonable alternative for TED-related severe upper-eyelid retraction correction. MATERIAL AND METHODS An innovative technique for levator lengthening using bovine acellular dermal matrix as a spacer graft is introduced for severe upper-eyelid retraction secondary to TED. Additionally, 2 modifications were introduced: the fibrous cords scattered on the surface of the levator aponeurosis were excised and the orbital fat pad anterior to the aponeurosis was dissected and sutured into the skin closure in a "skin-tarsus-fat-skin" fashion. RESULTS The modified levator-lengthening surgery was performed on 32 eyelids in 26 patients consisting of 21 women and 5 men (mean age, 37.8 years; age range, 19-67 years). After corrective surgery, the average upper margin reflex distance was lowered from 7.7±0.85 mm to 3.3±0.43 mm. Eighteen cases (69%) had perfect results, while 6 cases (23%) had acceptable results. CONCLUSIONS A modified levator-lengthening procedure using bovine acellular dermal matrix as a spacer graft ameliorated both the symptoms and signs of severe upper-eyelid retraction secondary to TED. This procedure is a reasonable alternative for correction of TED-related severe upper-eyelid retraction.

Bovine Acellular Dermal Matrix for Levator Lengthening in Thyroid-Related Upper-Eyelid Retraction

PubMed Central

Sun, Jing; Liu, Xingtong; Zhang, Yidan; Huang, Yazhuo; Zhong, Sisi; Fang, Sijie; Zhuang, Ai; Li, Yinwei; Zhou, Huifang

2018-01-01

Background Eyelid retraction is the most common and often the first sign of thyroid eye disease (TED). Upper-eyelid retraction causes both functional and cosmetic problems. In order to correct the position of the upper eyelid, surgery is required. Many procedures have demonstrated good outcomes in mild and moderate cases; however, unpredictable results have been obtained in severe cases. Dryden introduced an upper-eyelid-lengthening procedure, which used scleral grafts, but outcomes were unsatisfactory. A new technique is introduced in this study as a reasonable alternative for TED-related severe upper-eyelid retraction correction. Material/Methods An innovative technique for levator lengthening using bovine acellular dermal matrix as a spacer graft is introduced for severe upper-eyelid retraction secondary to TED. Additionally, 2 modifications were introduced: the fibrous cords scattered on the surface of the levator aponeurosis were excised and the orbital fat pad anterior to the aponeurosis was dissected and sutured into the skin closure in a “skin-tarsus-fat-skin” fashion. Results The modified levator-lengthening surgery was performed on 32 eyelids in 26 patients consisting of 21 women and 5 men (mean age, 37.8 years; age range, 19–67 years). After corrective surgery, the average upper margin reflex distance was lowered from 7.7±0.85 mm to 3.3±0.43 mm. Eighteen cases (69%) had perfect results, while 6 cases (23%) had acceptable results. Conclusions A modified levator-lengthening procedure using bovine acellular dermal matrix as a spacer graft ameliorated both the symptoms and signs of severe upper-eyelid retraction secondary to TED. This procedure is a reasonable alternative for correction of TED-related severe upper-eyelid retraction. PMID:29718902

Dentoalveolar class III treatment using retromolar miniscrew anchorage.

PubMed

Poletti, Laura; Silvera, Aimara A; Ghislanzoni, Luis T Huanca

2013-05-23

In this article, we report the successful use of miniscrews in the distalization of the lower dentition to correct an Angle class III malocclusion with lower anterior crowding in a dolichofacial adult patient. Conventional intraoral and extraoral appliances have many disadvantages, including the need for patient cooperation, potential for anchorage loss, and vertical extrusion of upper molars and lower incisors. Extrusion should be prevented or minimized when treating long-faced patients with reduced overbite. After third molar extractions, miniscrews were placed in the retromolar area. A sliding jig was applied to distalize the lower molars, while the anterior teeth were bonded and retracted secondarily to avoid round tripping. After 18 months of treatment, molar and canine class I relationship with normal overjet and overbite were achieved. In addition, there was an esthetic improvement in the profile with only a small increase of the lower anterior facial height. These results remained stable at a 12-month follow-up.

[Root resorption after orthodontic treatment: a study of age factor and prevalence in anterior teeth].

PubMed

Tian, Yu-lou; Wang, Kun; Wang, Jing; Liu, Fang; Piao, Mei-ling

2013-04-01

To investigate the impact of age factor on root resorption and the prevalence in anterior teeth during orthodontic treatment. Sixty extraction cases treated with straight wire appliance were divided into adult group and child group, with 30 cases in each group.The panoramic radiographs pre-treatment and post-treatment were examined to measure the degrees of root resorption. A total of 360 anterior teeth in each group were evaluated. SPSS 13.0 software package was applied to perform statistical analysis. There was significant difference in root resorption index before and after treatment(P<0.01). The incidence of root resorption increased remarkably after orthodontic treatment. There was significant difference in the degree of root resorption in two groups (P<0.01). The prevalence of root resorption in anterior teeth was: upper central incisors, upper lateral incisors, lower central incisors, lower lateral incisors, upper canines and lower canines. The root resorption in adult patients are more obvious than child patients. The prevalence of root resorption in anterior teeth is different. Moderate or severe root resorption is prone to happen in upper central incisors or lateral incisors in adult patients.

Camouflage of Severe Skeletal Class II Gummy Smile Patient Treated Nonsurgically with Mini Implants

PubMed Central

Qamruddin, Irfan; Shahid, Fazal; Alam, Mohammad Khursheed; Zehra Jamal, Wafa

2014-01-01

Skeletal class II has always been a challenge in orthodontics and often needs assistance of surgical orthodontics in nongrowing patients when it presents with severe discrepancy. Difficulty increases more when vertical dysplasia is also associated with sagittal discrepancy. The advent of mini implants in orthodontics has broadened the spectrum of camouflage treatment. This case report presents a 16-year-old nongrowing girl with severe class II because of retrognathic mandible, and anterior dentoalveolar protrusion sagittally and vertically resulted in severe overjet of 13 mm and excessive display of incisors and gums. Both maxillary central incisors were trimmed by general practitioner few years back to reduce visibility. Treatment involved use of micro implant for retraction and intrusion of anterior maxillary dentoalveolar segment while lower incisors were proclined to obtain normal overjet, and overbite and pleasing soft tissue profile. Smile esthetics was further improved with composite restoration of incisal edges of both central incisors. PMID:25548686

Assessment of changes following en-masse retraction with mini-implants anchorage compared to two-step retraction with conventional anchorage in patients with class II division 1 malocclusion: a randomized controlled trial.

PubMed

Al-Sibaie, Salma; Hajeer, Mohammad Y

2014-06-01

No randomized controlled trial has tried to compare treatment outcomes between the sliding en-masse retraction of upper anterior teeth supported by mini-implants and the two-step sliding retraction technique employing conventional anchorage devices. To evaluate skeletal, dental, and soft tissue changes following anterior teeth retraction. Parallel-groups randomized controlled trial on patients with class II division 1 malocclusion treated at the University of Al-Baath Dental School in Hamah, Syria between July 2011 and May 2013. One hundred and thirty-three patients with an upper dentoalveolar protrusion were evaluated and 80 patients fulfilled the inclusion criteria. Randomization was performed using computer-generated tables; allocation was concealed using sequentially numbered opaque and sealed envelopes. Fifty-six participants were analysed (mean age 22.34 ± 4.56 years). They were randomly distributed into two groups with 28 patients in each group (1:1 allocation ratio). Following first premolar extraction, space closure was accomplished using either the en-masse technique with mini-implants or the two-step technique with transpalatal arches (TPAs). The antero-posterior displacements of upper incisal edges and upper first molars were measured on lateral cephalograms at three assessment times. Assessor blinding was employed. A bodily retraction (-4.42 mm; P < 0.001) with a slight intrusion (-1.53 mm; P < 0.001) of the upper anterior teeth was achieved in the mini-implants group, whereas upper anterior teeth retraction was achieved by controlled palatal tipping in the TPA group. When retracting anterior teeth in patients with moderate to severe protrusion, the en-masse retraction based on mini-implants anchorage gave superior results compared to the two-step retraction based on conventional anchorage in terms of speed, dental changes, anchorage loss, and aesthetic outcomes.

Extraction of Maxillary Central Incisors: An Orthodontic-Restorative Treatment

PubMed Central

Hedayati, Zohreh; Zare, Maryam; Bahramnia, Fateme

2014-01-01

Malformed central incisors with poor prognosis could be candidates for extraction especially in crowded dental arches. This case report refers to a 12-year-old boy who suffered from malformed upper central incisors associated with severe attrition. Upper lateral incisors were positioned palatally and canines were rotated and positioned in the high buccal area. The patient had class II malocclusion and space deficiency in both dental arches. Due to incisal wear and malformed short maxillary central incisors and the need for root canal therapy with a major crown build-up, these teeth were extracted. The maxillary lateral incisors were substituted. Thus the maxillary canines were substituted for lateral incisors and the first premolars were substituted for canines. In the lower dental arch the first bicuspids were extracted. Composite resin build-up was performed on the maxillary lateral incisors and canines. This allowed for the crowding and the malocclusion to be corrected. Subsequent gingivectomy improved the patient's gingival margins and smile esthetics one month after orthodontic therapy. PMID:25400954

Isolated upper eyelid retraction: a sign of idiopathic inflammatory orbital disease.

PubMed

Shome, Debraj; Toshniwal, Svetlana; Jain, Vandana; Natarajan, Sundaram; Vemuganti, Geeta K

2008-01-01

A 41-year-old woman was examined for left upper eyelid retraction. Remaining ocular and systemic examination was unremarkable. Orbital CT demonstrated an ill-defined, extraconal, superior orbital soft-tissue mass involving the levator palpebrae superioris muscle. Incisional biopsy with histopathology demonstrated idiopathic orbital inflammation. The patient was started on a gradually tapering dose of oral steroids, for 6 weeks. On follow-up, the eyelid retraction had resolved. We report this case to demonstrate that idiopathic inflammatory orbital disease, localized to the superior orbit, may cause isolated upper eyelid retraction without associated proptosis. This condition resolves with medical therapy, leading to symmetrical palpebral apertures.

[The effect of pre-surgical orthodontics on secondary alveolar bone grafting in the patients with complete cleft lip and palate].

PubMed

Jia, Yi-lin; Fu, Min-kui; Ma, Lian

2004-05-01

To examine the effect of pre-surgical orthodontics on the outcome of the secondary alveolar bone grafting in the patients with complete cleft lip and palate. Sixteen complete cleft lip and palate patients (9 males and 7 females) with collapsed upper arch or severe mal-positioned upper incisors were selected. The cleft was not easily grafted because of the poor access. The total cleft sites were 22 (10 patients with UCLP and 6 patients with BCLP). The age range of the patients was from 8 to 22 years. Pre-surgical orthodontic treatment was mainly to expand the collapsed upper arch and correct the mal-positioned upper incisors. After the secondary alveolar bone grafting, the patients were followed up and anterior occlusal radiograph/intraoral panograph were taken regularly. The observation period was from 6 months to 4 years. Bergland criteria were used to evaluate the interdental septal height. Upper arch expansion and the correction of the mal-positioned upper incisors done by the orthodontic treatment made the bone grafting procedure easier. The clinically successful rate reached 86%. The severe upper arch collapse and mal-positioned upper incisors in the patients with complete cleft lip and palate should be corrected orthodontically before the secondary alveolar bone grafting.

Modified Full Thickness Graded Blepharotomy for Upper Eyelid Retraction Associated With Thyroid Eye Disease in East Asians.

PubMed

Lee, Joonsik; Lee, Hwa; Park, Minsoo; Baek, Sehyun

2016-12-01

To evaluate the functional and cosmetic outcomes of modified full thickness graded blepharotomy when used for East Asian patients with upper eyelid retraction of thyroid eye disease (TED). Medical records of each patient who underwent modified full-thickness blepharotomy at Korea University Guro Hospitals from January 2009 to February 2014 to correct upper eyelid retraction resulting from TED were retrospectively reviewed. Modified full-thickness graded blepharotomies were performed on 22 eyelids of 18 patients. The most common preoperative upper eyelid retraction-associated symptom was asymmetry of the upper eyelid (14 patients, 77.7%) followed by discomfort (10 patients, 55.5%), photophobia (5 patients, 27.7%), and epiphora (4 patients, 22.2%). Most preoperative symptoms improved after blepharotomy (Table 1). Preoperatively, upper eyelid retraction (MRD1; midpupil marginal reflex distance) ranged from 2.3 mm to 6.8 mm (mean, 5.23 ± 0.89) in 22 lids; postoperatively, lid retraction significantly decreased to 3.26 ± 1.23 mm (P = 0.03 by independent t test) (Table 2). Lid retraction was divided into 3 groups according to severity; a severe group (5 eyelids, 27.7%), a moderate group (14 eyelids, 63.6%), and a mild group (3 eyelids, 13.6%). The MRD1 improved regardless of severity (P = 0.03 in the severe group, P = 0.02 in the moderate group, and P = 0.04 in the mild group by independent t test). The MRD1 improvement did not differ significantly among groups (P = 0.08 by Pearson χ t test). At 6 months postoperatively, the midpupil marginal reflex distance was the perfect height in 13 of 22 lids (59.0%), with a mean reduction of 3 mm, whereas 7 of 22 eyelids (31.8%) were at acceptable height and 2 eyelids (9.0%) showed failure. Overall, 18 eyelids (90.9%) exhibited objectively satisfactory results (perfect or acceptable) at 6 months after surgery (Table 3). Modified graded full thickness eyelid blepharotomy is a reliable and safe method for upper eyelid lengthening for East Asian patients with upper eyelid retraction of TED that offers excellent functional and cosmetic results.

Quantitative and perceived visual changes of the nasolabial fold following orthodontic retraction of lip protrusion.

PubMed

Baek, Eui Seon; Hwang, Soonshin; Choi, Yoon Jeong; Roh, Mi Ryung; Nguyen, Tung; Kim, Kyung-Ho; Chung, Chooryung J

2018-07-01

The objectives of this study were to evaluate the quantitative and perceived visual changes of the nasolabial fold (NLF) after maximum retraction in adults and to determine its contributing factors. A total of 39 adult women's cone-beam computed tomography images were collected retrospectively and divided into the retraction group (age 26.9 ± 8.80) that underwent maximum retraction following 4 premolar extraction and the control group (age 24.6 ± 5.36) with minor changes of the incisors. Three-dimensional morphologic changes of hard and soft tissue including NLF were measured by pre- and posttreatment cone-beam computed tomography. In addition, perceived visual change of the NLF was monitored using the modified Global Aesthetic Improvement Scale. The influence of age, initial severity of NLF, and initial soft tissue thickness was evaluated. Anterior retraction induced significant changes of the facial soft tissue including the lips, perioral, and the NLF when compared with the controls ( P < .01). Perceived visual changes of the NLF was noted only in women younger than age 30 ( P < .05), with the odds ratio (95% confidence interval) of 2.44 (1.3461-4.4226), indicating greater possibility for improvement of NLF esthetics in young women of the retraction group when compared with the controls. Orthodontic retraction induced quantitative and perceived visual changes of the NLF. For adult women younger than age 30, the appearance of the NLF improved after maximum retraction despite the greater posterior change of the NLF.

Dentoskeletal and Soft Tissue Effects in the Treatment of Class II Malocclusion with Klammt's Elastic Open Activator.

PubMed

Inamassu-Lemes, Sheila Marques; Fuziy, Acácio; Costa, André Luiz Ferreira; Carvalho, Paulo Eduardo Guedes; Nahás-Scocate, Ana Carla Raphaelli

2016-01-01

The purpose of this study was to evaluate the dentoskeletal and soft tissue effects resulting from treatment with Klammt's elastic open activator (EOA) functional orthopedic appliance in patients with Class II malocclusion characterized by mandibular deficiency. Teleradiographs were evaluated in the lateral aspect of the initial (T1) and final (T2) orthopedic phases for 16 patients with Class II, Division 1 malocclusion. The age range was from 9 to 11.2 years, with a mean age of 9.9 years. The cephalometric points were demarcated, and cephalometric measurements were obtained by the same investigator to avoid interobserver variability. The EOA promoted increased lower anterior facial height (LAFH), increased effective mandibular length, clockwise rotation of the mandible, retrusion and verticalization of the upper incisors, proclination and protrusion of the lower incisors, extrusion of the upper molars, mesial movement of the lower molars and anterior projection of the lower lip. Skeletal changes characterized by an increase in mandibular length and dentoalveolar changes with an emphasis on the verticalization and retrusion of the upper incisors, proclination of the lower incisors and mesial positioning of the lower molars were key to improving the occlusal relationship and esthetic facial factors. The EOA is well indicated in patients with Class II malocclusion due to mandibular deficiency with increased overbite, proclined upper incisors and verticalized lower incisors.

[Torque control evaluated by lateral cephalometric radiography and cone-beam CT after retraction of the upper anterior teeth].

PubMed

Yang, Xue; Qian, Yu-Fen

2016-08-01

To investigate the relationship between torque control and movement type of the teeth and to investigate the correlation between reconstruction of the alveolar bone and retraction of the upper anterior teeth. Cephalograms of pre-treatment and post-treatment of 111 cases and cone-beam computed tomography of pre-retraction and post-retraction of 7 cases were collected. The inclination degree of the upper anterior teeth, the horizontal and vertical displacement of edge and apex,and the thickness of the alveolar bone at the apex level were measured. Student's t test and Pearson χ2 test were performed for statistical analysis with SAS 8.02 software package. Cases who received torque control during the period of retraction displayed less change of inclination degree of the upper anterior teeth, less lingual displacement of the edge, more lingual displacement of the apex. The total thickness of the alveolar bone at the apex level and the length of the teeth significantly decreased after retraction(P<0.05). The amount of the alveolar bone rebuilt after retraction was less than that of the tooth movement, and there was no significant difference between teenagers and adults. During retraction of the upper anterior teeth, cases who received torque control showed less inclination degree change of the upper anterior teeth, less lingual displacement of the edge, more lingual displacement of the apex. More bodily movement and partially controlled tipping movement as well as higher incident rate of severe root resorption would also arise. There was correlation between reconstruction of the alveolar bone and the tooth movement. Since the amount of adaptive reconstruction of the lingual alveolar bone was limited, and there was no difference between teenagers and adults, excessive lingual displacement would surpass its adaption ability, and gave rise to alveolar bone and tooth damage.

Tooth demineralization and associated factors in patients on fixed orthodontic treatment.

PubMed

Salmerón-Valdés, Elías Nahúm; Lara-Carrillo, Edith; Medina-Solís, Carlo Eduardo; Robles-Bermeo, Norma Leticia; Scougall-Vilchis, Rogelio José; Casanova-Rosado, Juan Fernando; Pontigo-Loyola, América Patricia; Fernández Barrera, Miguel Ángel

2016-11-02

Dental demineralization was determined in patients at three time points during fixed orthodontic treatment. A multiple cross-sectional study included 108 patients divided into three different groups: (1) beginning of orthodontic treatment; (2) one year into treatment; and (3) two years into treatment. Demineralization was estimated using a DIAGNOdent pen. We obtained data from multiple tooth-by-tooth demineralization readings combined with salivary pH and patients' oral hygienic and dietary behaviors. A t-test for independent samples and Spearman´s correlation were performed. No demineralizations differences were found between the initial stage and one year into treatment. Between one and two years small differences were observed, but demineralization increased between the initial stage and second treatment year, predominating in upper right central incisors (p = 0.056), upper left lateral incisors (p = 0.040), both upper canines (p = 0.055 and p = 0.040, respectively) and first left premolars (p = 0.034 and p = 0.053, respectively). We did not find associations between oral hygiene and dietary behaviours or salivary pH. In conclusion, demineralization occurred in first year of treatment and increased during second year, predominating in the upper arch and the left side mainly in upper right central incisors, upper left lateral incisors, both upper canines, and first left premolars.

The success rate of TED upper eyelid retraction reoperations.

PubMed

Golan, Shani; Rootman, Dan B; Goldberg, Robert A

2016-12-01

Although reoperation rates for upper lid retraction surgery for thyroid eye disease (TED) typically range between 8% and 23%, there is little literature describing the outcomes of these second operations. In this retrospective observational cohort study, all patients that underwent surgery for upper eyelid retraction over a 14-year period at a single institution were included. Cases were included if a second eyelid retraction surgery was performed during the study period. Success of surgery was defined as a marginal reflex distance (MRD1) of 2.5 to 4.5 mm in each eye and less than 1 mm difference in MRD1 between the eyes. Overcorrection and undercorrection were defined as above and below these bounds, respectively. 72 eyes in 49 patients were included in the study. The mean age was 56.6 (±11.5) years. By definition, all patients had at least 1 lid lengthening surgery for upper eyelid retraction, and at least 1 subsequent surgery. For this second surgery, 61 eyes (85%) underwent retraction surgery and 11 eyes (15%) underwent ptosis surgery. After this second operation, 31% were undercorrected and 33% were overcorrected. A third surgery was performed in 19 eyes (25%), 12 had surgery for residual retraction and 7 for ptosis. After the third operation 10% of eyes were under corrected and 11% were over corrected. Four patients underwent a fourth surgery: one for retraction and three for ptosis. Success was noted in 35% after the second surgery and 44% after the third. Surgical success in eyelid retraction surgery increases from a second to a third consecutive surgery, and residual asymmetry was roughly equally distributed between over- and undercorrection.

[Upper lateral incisor with 2 canals].

PubMed

Fabra Campos, H

1991-01-01

Clinical case summary of the patient with an upper lateral incisor with two root canals. The suspicion that there might be an anatomic anomaly in the root that includes a complex root canal system was made when an advanced radicular groove was detected in the lingual surface or an excessively enlarged cingulum.

Influence of the vertical position of maxillary central incisors on the perception of smile esthetics among orthodontists and laypersons.

PubMed

Machado, Andre Wilson; McComb, Ryan W; Moon, Won; Gandini, Luiz Gonzaga

2013-12-01

The purpose of this study was to determine the perception of smile esthetics among orthodontists and laypeople with respect to different upper central incisor vertical positions in a frontal smile analysis. A frontal close-up smile photo of an adult Caucasian woman was selected. The patient had healthy upper anterior dentition and had no history of orthodontic treatment. Images were altered in order to create six different central incisor vertical positions in 0.5-mm increments. All images were assessed in three different views: full smile, gingival close-up excluding incisal edges, and incisal close-up excluding gingival margins. Images were randomly assembled in an album, which was given to 120 judges: 60 orthodontists and 60 laypersons. Each rater was asked to evaluate the attractiveness of the images using the visual analog scale. The data collected were then statistically analyzed. The highest rated smiles showed two notable characteristics: the central-to-lateral incisal step was 1.5 mm; and the central incisor gingival margins matched the laterals, and both were 0.5 mm below the line of the canine gingival margins. The least attractive smile was the one with no step between the centrals and laterals, and with the central incisor gingival margins 1.0 mm above the canine gingival margins. The results of this study indicate that slightly extruded upper central incisors are more esthetically preferred than intruded. The upper central incisors are the key determinant in evaluating smile esthetics, and thus, the assessment of their ideal vertical positioning is an aspect of paramount importance. © 2013 Wiley Periodicals, Inc.

Effectiveness of orthodontic miniscrew implants in anchorage reinforcement during en-masse retraction: A systematic review and meta-analysis.

PubMed

Antoszewska-Smith, Joanna; Sarul, Michał; Łyczek, Jan; Konopka, Tomasz; Kawala, Beata

2017-03-01

The aim of this systematic review was to compare the effectiveness of orthodontic miniscrew implants-temporary intraoral skeletal anchorage devices (TISADs)-in anchorage reinforcement during en-masse retraction in relation to conventional methods of anchorage. A search of PubMed, Embase, Cochrane Central Register of Controlled Trials, and Web of Science was performed. The keywords were orthodontic, mini-implants, miniscrews, miniplates, and temporary anchorage device. Relevant articles were assessed for quality according to Cochrane guidelines and the data extracted for statistical analysis. A meta-analysis of raw mean differences concerning anchorage loss, tipping of molars, retraction of incisors, tipping of incisors, and treatment duration was carried out. Initially, we retrieved 10,038 articles. The selection process finally resulted in 14 articles including 616 patients (451 female, 165 male) for detailed analysis. Quality of the included studies was assessed as moderate. Meta-analysis showed that use of TISADs facilitates better anchorage reinforcement compared with conventional methods. On average, TISADs enabled 1.86 mm more anchorage preservation than did conventional methods (P <0.001). The results of the meta-analysis showed that TISADs are more effective than conventional methods of anchorage reinforcement. The average difference of 2 mm seems not only statistically but also clinically significant. However, the results should be interpreted with caution because of the moderate quality of the included studies. More high-quality studies on this issue are necessary to enable drawing more reliable conclusions. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Biology of biomechanics: Finite element analysis of a statically determinate system to rotate the occlusal plane for correction of a skeletal Class III open-bite malocclusion.

PubMed

Roberts, W Eugene; Viecilli, Rodrigo F; Chang, Chris; Katona, Thomas R; Paydar, Nasser H

2015-12-01

In the absence of adequate animal or in-vitro models, the biomechanics of human malocclusion must be studied indirectly. Finite element analysis (FEA) is emerging as a clinical technology to assist in diagnosis, treatment planning, and retrospective analysis. The hypothesis tested is that instantaneous FEA can retrospectively simulate long-term mandibular arch retraction and occlusal plane rotation for the correction of a skeletal Class III malocclusion. Seventeen published case reports were selected of patients treated with statically determinate mechanics using posterior mandible or infrazygomatic crest bone screw anchorage to retract the mandibular arch. Two-dimensional measurements were made for incisor and molar movements, mandibular arch rotation, and retraction relative to the maxillary arch. A patient with cone-beam computed tomography imaging was selected for a retrospective FEA. The mean age for the sample was 23.3 ± 3.3 years; there were 7 men and 10 women. Mean incisor movements were 3.35 ± 1.55 mm of retraction and 2.18 ± 2.51 mm of extrusion. Corresponding molar movements were retractions of 4.85 ± 1.78 mm and intrusions of 0.85 ± 2.22 mm. Retraction of the mandibular arch relative to the maxillary arch was 4.88 ± 1.41 mm. Mean posterior rotation of the mandibular arch was -5.76° ± 4.77° (counterclockwise). The mean treatment time (n = 16) was 36.2 ± 15.3 months. Bone screws in the posterior mandibular region were more efficient for intruding molars and decreasing the vertical dimension of the occlusion to close an open bite. The full-cusp, skeletal Class III patient selected for FEA was treated to an American Board of Orthodontics Cast-Radiograph Evaluation score of 24 points in about 36 months by en-masse retraction and posterior rotation of the mandibular arch: the bilateral load on the mandibular segment was about 200 cN. The mandibular arch was retracted by about 5 mm, posterior rotation was about 16.5°, and molar intrusion was about 3 mm. There was a 4° decrease in the mandibular plane angle to close the skeletal open bite. Retrospective sequential iterations (FEA animation) simulated the clinical response, as documented with longitudinal cephalometrics. The level of periodontal ligament stress was relatively uniform (<5 kPa) for all teeth in the mandibular arch segment. En-masse retraction of the mandibular arch is efficient for conservatively treating a skeletal Class III malocclusion. Posterior mandibular anchorage causes intrusion of the molars to close the vertical dimension of the occlusion and the mandibular plane angle. Instantaneous FEA as modeled here could be used to reasonably predict the clinical results of an applied load. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

A Promising Modified Procedure for Upper Eyelid Retraction-Associated Graves' Ophthalmopathy: Transconjunctival Lateral Levator Aponeurectomy.

PubMed

Khatavi, Fatima; Nasrollahi, Kobra; Zandi, Alireza; Panahi, Maryam; Mortazavi, Mahshid; Pourazizi, Mohsen; Ranjbar-Omidi, Behzad

2017-01-01

Upper eyelid retraction is a characteristic feature of thyroid eye disease, including Graves' orbitopathy. In this study, a new surgical technique for correction of lid retraction secondary to Graves' orbitopathy is described. Sixteen eyelids of patients older than 18 years old underwent surgical correction for moderate to severe lid retraction secondary to Graves' orbitopathy. In this procedure, levator aponeurectomy was performed via a transconjunctival approach. Upper marginal reflex distance (MRD1) was measured before the surgery and at 1 week, 3 months, and 6 months after the surgery. MRD1 was reduced significantly from preoperatively (mean: 7.84 mm) to 1 week after the surgery (mean: 3.59 mm) (P < 0.001). Three and six months after surgery, mean MRD1 was 5.09 mm and 5.10 mm, respectively, showing that lid retraction was improved significantly (P < 0.001). Lateral levator aponeurectomy via the transconjunctival approach is a simple, scar-less, quick procedure that has optimal stable outcome.

Removable orthodontic appliance with nickel-titanium spring to reposition the upper incisors in an autistic patient.

PubMed

Saito, Kan; Jang, Insan; Kubota, Kazumi; Hoshino, Tomonori; Hotokezaka, Hitoshi; Yoshida, Noriaki; Fujiwara, Taku

2013-01-01

A newly designed removable appliance with a shape-memory wire was used for the orthodontic treatment of the anterior teeth in an 11-year-old child who had autism and intellectual disability. The device was designed to reduce the lateral incisor crossbite and the central incisors' labial rotation. The child was treated for 1 year with this removable appliance. Tooth movement was analyzed using cephalograms and surface data were derived from study models. This device proved to be very durable. The lateral incisor crossbite was corrected, and the inclination of the upper central incisors and the interincisal angle were improved. This appliance exerts light and continuous orthodontic force, without requiring any adjustments of the spring wire. The appliance also facilitated orthodontic treatment in a child with intellectual disability in whom treatment with a standard orthodontic device would be unsuitable. ©2012 Special Care Dentistry Association and Wiley Periodicals, Inc.

Evaluation of Periodontal Changes Adjacent to Extraction Sites during Upper Canine Retraction.

PubMed

Al-Jundi, Azzam; Sabbagh, Basem Al; Baskaradoss, Jagan K

2017-02-01

There is an intimate relationship between orthodontic therapy and the periodontal changes that occur during tooth movement. This prospective clinical trial aims at investigating the movement of both the free and attached gingiva, as well as the movement of the alveolar bone in the extraction site of the upper 1st premolars during the retraction of the upper canines. In this study, 17 patients (10 female, 7 male) requiring 1st premolar extraction before orthodontic tooth movement were selected and treated at the Department of Orthodontics in the Faculty of Dentistry in University of Hama, Hama, Syria. The upper 1st premolars were extracted, and the implant AutoTacs were applied on the alveolar bone afterward. Then, measurements between the center of the implant AutoTacs and the L-shape wire were taken, utilizing digital Vernier caliper. After 3 weeks of extraction, tattooing marked points were placed on the free and the attached gingival, and the measurements were taken using the same digital Vernier caliper. Closed coil springs made of nickel-titanium were used to retract the upper canines, and a force of 150 gm was applied. The results of this study showed significant differences between the movement of both the free and attached gingiva and the movement of the corresponding upper canines (p < 0.001). The movement of the free gingiva had formed about 77% of the amount of the movement of the upper canine retraction. No significant differences were detected between the place of implant AutoTac X1 and the L-shaped wire (W) during the retraction of the upper canine. On the contrary, significant differences were noticed between the place of implant AutoTac X2 and the L-shaped wire (W) during the retraction of the upper canine (p < 0.001). There is significant movement of hard and soft tissues during and after premolar extraction and orthodontic therapy. The movement of supporting tissues of the teeth along with the alveolar bone during canine retraction is an important biological characteristic of the orthodontic tooth movement. Clinicians need to understand the role and importance of the supporting tissues during orthodontic treatment, which needs to be incorporated into their routine clinical evaluations.

The impact of digging on craniodental morphology and integration.

PubMed

McIntosh, A F; Cox, P G

2016-12-01

The relationship between the form and function of the skull has been the subject of a great deal of research, much of which has concentrated on the impact of feeding on skull shape. However, there are a number of other behaviours that can influence craniodental morphology. Previous work has shown that subterranean rodents that use their incisors to dig (chisel-tooth digging) have a constrained cranial shape, which is probably driven by a necessity to create high bite forces at wide gapes. Chisel-tooth-digging rodents also have an upper incisor root that is displaced further back into the cranium compared with other rodents. This study quantified cranial shape and upper incisors of a phylogenetically diverse sample of rodents to determine if chisel-tooth-digging rodents differ in craniodental morphology. The study showed that the crania of chisel-tooth-digging rodents shared a similar place in morphospace, but a strong phylogenetic signal within the sample meant that this grouping was nonsignificant. It was also found that the curvature of the upper incisor in chisel-tooth diggers was significantly larger than in other rodents. Interestingly, most subterranean rodents in the sample (both chisel-tooth and scratch diggers) had upper incisors that were better able to resist bending than those of terrestrial rodents, presumably due to their similar diets of tough plant materials. Finally, the incisor variables and cranial shape were not found to covary consistently in this sample, highlighting the complex relationship between a species' evolutionary history and functional morphology. © 2016 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2016 European Society For Evolutionary Biology.

Clinical and radiographic evaluation of maxillary central incisors exposure in patients undergoing maxillary advancement

PubMed Central

Trento, Guilherme dos Santos; Bernabé, Felipe Bueno Rosettti; da Costa, Delson João; Rebellato, Nelson Luis Barbosa; Klüppel, Leandro Eduardo; Scariot, Rafaela

2015-01-01

Abstract Introduction: Patients with dentofacial deformities may undergo orthodontic or orthodontic-surgical treatment. Both modalities can affect esthetics. Objective: This study aims to evaluate clinical and radiographic changes in exposure of maxillary central incisors occurring after orthognathic surgery for maxillary advancement. Methods: A total of 17 patients who underwent orthognathic surgery for maxillary advancement between September, 2010 and July, 2011 were selected. Exposure of maxillary central incisors was evaluated clinically and by lateral cephalograms. Measurements were taken one week before and three months after surgery. Data were paired in terms of sex, age, nasolabial angle, height and thickness of the upper lip, the amount of maxillary advancement, clinical exposure and inclination of maxillary central incisor by statistical tests (CI 95%). Results: After maxillary advancement, incisor clinical exposure had increased even with relaxed lips and under forced smile. Moreover, there was a mean increase of 23.33% revealed by lateral cephalograms. There was an inverse correlation between upper lip thickness and incisors postsurgical exposure revealed by radiographic images (p = 0.002). Conclusions: Significant changes in the exposure of maxillary central incisors occur after maxillary advancement, under the influence of some factors, especially lip thickness. PMID:26691970

Esthetic evaluation of dental and gingival asymmetries.

PubMed

Fernandes, Liliana; Pinho, Teresa

2015-06-01

The aim of this study was to determine which smile asymmetries were less esthetic, dental or gingival. Laypeople (297), generalists (223), prosthodontists (50) and orthodontists (49), evaluated the esthetics of digitally-modified images taken from the same frontal intra-oral photograph, using the same lips, simulating upper maxillary midline shift, occlusal plane inclination, asymmetric incisal edge and asymmetric gingival migration. The images were later paired into 3 groups. The only ones considered esthetic were the asymmetric incisal edge of the 0.5 mm shorter upper central incisor and the asymmetric gingival migration (2 mm) of the upper central incisor. In the paired images, upper maxillary midline shift vs. occlusal plane inclination, the former was rated less esthetic, while in the asymmetric incisal edge vs. asymmetric gingival migration pair, the latter was considered to be less esthetic. Laypeople and generalists consider smiles more attractive. The only images considered esthetic were the asymmetric incisal edge of the central incisor shorter by 0.5 mm and the 2 mm asymmetric gingival migration of the upper central incisor. In the horizontal plane (maxillary midline shift vs. occlusal plane cant), the dental asymmetries were considered less esthetic than the gingival asymmetries. However, in the vertical plane (asymmetric incisal edge vs. asymmetric gingival migration) the opposite was recorded. Copyright © 2015 CEO. Published by Elsevier Masson SAS. All rights reserved.

A finite element analysis of the optimal bending angles in a running loop for mesial translation of a mandibular molar using indirect skeletal anchorage.

PubMed

Kim, M-J; Park, J H; Kojima, Y; Tai, K; Chae, J-M

2018-02-01

To estimate the optimal bending angles in the running loop for mesial translation of a mandibular second molar using indirect skeletal anchorage and to clarify the mechanics of tipping and rotating the molar. A three-dimensional finite element model was developed for predicting tooth movement, and a mechanical model based on the beam theory was constructed for clarifying the force systems. When using a running loop without bends, the molar tipped mesially 14.4° and lingually 0.6°, rotated counterclockwise 4.1°, and the incisors retracted 0.02 mm and intruded 0.05 mm. These angles were about the same as those estimated by the beam theory. When the amount of tip back and toe-in angles was 11.0°, mesial translation of the molar was achieved, and incisors retracted 0.10 mm and intruded 0.30 mm. Mesial translation of a mandibular second molar without any significant movement of anterior teeth was achieved during protraction by controlling the tip back and toe-in angles and enhancing anterior anchorage with the combined use of a running loop and indirect skeletal anchorage. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Tooth movement using palatal implant supported anchorage compared to conventional dental anchorage.

PubMed

Borsos, Gabriella; Vokó, Zoltan; Gredes, Tomasz; Kunert-Keil, Christiane; Vegh, Andras

2012-11-01

Tooth stability is one of the most changing parameters in age. The aim of the present study has been to clarify the therapeutic benefit of the osseointegrated palatal implant (PI) supported anchorage in adolescents compared with conventional dental anchorage (DA) in extraction cases requiring 'maximum anchorage' in growing patients following the post pubertal growth spurt. Thirty patients (14.22±1.37 years) selected with homogeneous facial skeletal characteristics were divided in two groups. In the PI group, Orthosystem(®) implants were placed into the palate for anchorage and the transpalatal arch (TPA) was fixed to the implant and to the molar bands. In the DA group maximal anchorage was provided by a TPA and a utility arch. Super-elastic spring was used for canine- and contraction arch for incisor retraction. An insignificant difference was observed between the groups as to the duration of the canine retraction. In the PI group, the duration of the front retraction and the total treatment time was shorter compared to the DA group (P<0.05). No significant difference in molar mesial movement was found during canine retraction, but during front retraction, there was significantly less mesial molar movement in the PI group compared to the DA group (P<0.05). The use of palatal implant-based anchorage does not offer a shorter canine retraction period, but resulted in a significant shortening of the front-retraction phase and a total treatment time shortened by 5 months on average. The tooth stability in adolescent patients is adequate for tooth movements using both methods. Copyright © 2012 Elsevier GmbH. All rights reserved.

Nonsurgical correction of a Class III malocclusion in an adult by miniscrew-assisted mandibular dentition distalization.

PubMed

Jing, Yan; Han, Xianglong; Guo, Yongwen; Li, Jingyu; Bai, Ding

2013-06-01

This article reports the successful use of miniscrews in the mandible to treat a 20-year-old Mongolian woman with a chief complaint of anterior crossbite. The patient had a skeletal Class III malocclusion with a mildly protrusive mandible, an anterior crossbite, and a deviated midline. In light of the advantages for reconstruction of the occlusal plane and distal en-masse movement of the mandibular arch, we used a multiloop edgewise archwire in the initial stage. However, the maxillary incisors were in excessive labioversion accompanied by little retraction of the mandibular incisors; these results were obviously not satisfying after 4 months of multiloop edgewise archwire treatment. Two miniscrews were subsequently implanted vertically in the external oblique ridge areas of the bilateral mandibular ramus as skeletal anchorage for en-masse distalization of the mandibular dentition. During treatment, the mandibular anterior teeth were retracted about 4.0 mm without negative lingual inclinations. The movement of the mandibular first molar was almost bodily translation. The maxillary incisors maintained good inclinations by rotating their brackets 180° along with the outstanding performance of the beta-titanium wire. The patient received a harmonious facial balance, an attractive smile, and ideal occlusal relationships. The outcome was stable after 1 year of retention. Our results suggest that the application of miniscrews in the posterior area of the mandible is an effective approach for Class III camouflage treatment. This technique requires minimal compliance and is particularly useful for correcting Class III patients with mild mandibular protrusion and minor crowding. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Asymmetric severe skeletal Class II division 1 patient with temporomandibular joint disorder treated with zygomatic anchorage devices and Ni-Ti alloy wires.

PubMed

Ishida, Takayoshi; Ono, Takashi

2014-09-01

To describe the orthodontic treatment of a nongrowing 30-year-old woman with asymmetric severe skeletal Class II malocclusions (asymmetric Angle Class II), large overjet (16 mm), large overbite (8 mm), two congenitally missing mandibular incisors (presenting a deciduous anterior tooth), and signs and symptoms of temporomandibular joint disorder (TMD). We used novel improved super-elastic Ni-Ti alloy wires (ISWs) combined with Ni-Ti alloy coil springs, power hooks, and a zygomatic implant as reinforced anchorage to provide a constant and continuous mild force to the dentition. We successfully distalized maxillary molars, premolars, and retracted anterior teeth and corrected the asymmetric Angle Class II molar relationship using this system of zygomatic anchorage in conjunction with ISWs, Ni-Ti alloy open-coil springs, and crimpable power hook. The maxillary molars were distalized, and postero-occlusal relationships were improved to achieve Class I canine and molar relationships on both sides. Intrusion of the upper molars made the mandibular plane close. Ideal overbite and overjet relationships were established. Facial esthetics were improved with decreased upper and lower lip protrusion, and no symptoms of TMD were observed after treatment. The orthodontic treatment described here is a promising anchorage technique alternative to traditional techniques to improve severe skeletal Class II with TMD.

Elastic band causing exfoliation of the upper permanent central incisors.

PubMed

Alves, Monica Ghislaine Oliveira; Kitakawa, Dárcio; Becker, Joao Batista Macedo; Brandão, Adriana Aigotti Haberbeck; Cabral, Luiz Antonio Guimarães; Almeida, Janete Dias

2015-01-01

Objective. This study reports a case in which elastic band use culminated in the loss of the incisors. Case Report. An 11-year-old white girl was seen complaining of pain, with purulent discharge and severe tooth mobility. The bone destruction detected radiographically in the region, despite its single location and absence in posterior quadrants of the maxilla and/or mandible, was similar to that observed in Langerhans cell disease. To our surprise, an elastic band involving the midportion of the roots of the two upper central incisors was found during biopsy. The debris was removed and a metal wire was placed in permanent maxillary right and left incisors. The patient was followed up, but no improvement in tooth mobility was observed. Bone loss increased, and internal resorption and root exposure occurred, which culminated in the extraction of permanent maxillary right and left incisors. Conclusion. The present case highlights the fact that professionals sometimes are confronted by anamnestic reports never seen before.

Acromiohumeral Distance Change Relates to Middle Trapezius Muscle Activation During Shoulder Elevation With Scapular Retraction.

PubMed

Guney-Deniz, Hande; Harput, Gulcan; Toprak, Ugur; Duzgun, Irem

2018-05-29

The scapular retraction exercises are widely used among clinicians to balance the activity of the scapular muscles as well as the rotator cuff muscles in different shoulder abduction positions. The aim of this study was to investigate the relationship between scapular (middle and upper trapezius) and shoulder muscles (middle deltoid and infraspinatus) activation level differences and acromiohumeral distance changes during shoulder abduction with scapular retraction. Cross-sectional study. University research laboratory. Nineteen asymptomatic individuals were included (mean ± SD age, 22.4 ± 1.8 years). The acromiohumeral distance was measured at 0° and 90° shoulder abduction when scapula was in non-retracted and retracted position with ultrasound imaging. The relationship between muscle activation level changes and acromiohumeral distance difference was analyzed with Pearson correlation test. Middle trapezius muscle activity change correlated with acromiohumeral distance difference (r=0.55, p=0.018) from 0º to 90º shoulder abduction when scapula was retracted. For both non-retracted and retracted scapular positions, no correlations were found between middle deltoid, infraspinatus and upper trapezius muscle activity changes with acromiohumeral distance differences during shoulder abduction (p>0.05). Active scapular retraction exercise especially focusing on the middle trapezius muscle activation seems to be an effective treatment option to optimize the acromiohumeral distance during shoulder abduction.

Retractable Visual Indicator Assembly

NASA Technical Reports Server (NTRS)

Hackler, George R. (Inventor); Gamboa, Ronald J. (Inventor); Dominquez, Victor (Inventor)

1998-01-01

A retractable indicator assembly may be mounted on a container which transmits air through the container and removes deleterious gases with an activated charcoal medium in the container. The assembly includes: an elongate indicator housing has a chamber therein; a male adaptor with an external threads is used for sealing engagement with the container; a plug located at the upper end of the housing; a housing that includes a transparent wall portion for viewing at least a portion of the chamber; a litmus indicator, moveable by a retractable rod from a retracted position within the container to an extended position within the chamber of the housing; and an outer housing that is secured to the upper end of the rod, and protects the indicator housing while the litmus indicator is in its normally retracted position. The assembly may be manually manipulated between its extended position wherein the litmus indicator may be viewed through the transparent wall of the indicator housing, and a retracted position wherein the outer housing encloses the indicator housing and engages the exterior of the container.

Periodontal probing of an impacted tooth recovered through a surgical-orthodontic approach: a case report.

PubMed

Dinoi, Maria Teresa; Lacarbonara, Mariano; Dimartino, Salvatore; Monaco, Annalisa; Marzo, Giuseppe

2014-01-27

The aim of this work was to assess the periodontal support of a central upper incisor recovered through a surgical-orthodontic approach compared to the spontaneously erupted contralateral incisor. This case study describes an 8-year-old Caucasian female with an impacted upper right central incisor. Surgical-orthodontic treatment was performed to reset the impacted dental element in the arch. Periodontal probing was performed of all sites (mesio-buccal, central-buccal, disto-buccal, mesio-palatal, central-palatal and disto-palatal) of the recovered impacted tooth and the contralateral tooth. The results were compared to determine whether the treated element showed signs of periodontal injury. Most of the probing results on both her right and left incisors gave values of approximately 3mm, which were not considered pathological. Both dental elements had adequate and physiological osseous attachments.

Apical root resorption during orthodontic treatment. A prospective study using cone beam CT.

PubMed

Lund, Henrik; Gröndahl, Kerstin; Hansen, Ken; Gröndahl, Hans-Göran

2012-05-01

To investigate the incidence and severity of root resorption during orthodontic treatment by means of cone beam computed tomography (CBCT) and to explore factors affecting orthodontically induced inflammatory root resorption (OIIRR). CBCT examinations were performed on 152 patients with Class I malocclusion. All roots from incisors to first molars were assessed on two or three occasions. At treatment end, 94% of patients had ≥1 root with shortening >1 mm, and 6.6% had ≥1 tooth where it exceeded 4 mm. Among teeth, 56.3% of upper lateral incisors had root shortening >1 mm. Of upper incisors and the palatal root of upper premolars, 2.6% showed root shortenings >4 mm. Slanted surface resorptions of buccal and palatal surfaces were found in 15.1% of upper central and 11.5% of lateral incisors. Monthly root shortening was greater after 6-month control than before. Upper jaw teeth and anterior teeth were significantly associated with the degree of root shortening. Gender, root length at baseline, and treatment duration were not. Practically all patients and up to 91% of all teeth showed some degree of root shortening, but few patients and teeth had root shortenings >4 mm. Slanted root resorption was found on root surfaces that could be evaluated only by a tomographic technique. A CBCT technique can provide more valid and accurate information about root resorption.

Camouflage treatment of skeletal Class III malocclusion with multiloop edgewise arch wire and modified Class III elastics by maxillary mini-implant anchorage.

PubMed

He, Shushu; Gao, Jinhui; Wamalwa, Peter; Wang, Yunji; Zou, Shujuan; Chen, Song

2013-07-01

To evaluate the effect of the multiloop edgewise arch wire (MEAW) technique with maxillary mini-implants in the camouflage treatment of skeletal Class III malocclusion. Twenty patients were treated with the MEAW technique and modified Class III elastics from the maxillary mini-implants. Twenty-four patients were treated with MEAW and long Class III elastics from the upper second molars as control. Lateral cephalometric radiographs were obtained and analyzed before and after treatment, and 1 year after retention. Satisfactory occlusion was established in both groups. Through principal component analysis, it could be concluded the anterior-posterior dental position, skeletal sagittal and vertical position, and upper molar vertical position changed within groups and between groups; vertical lower teeth position and Wits distance changed in the experimental group and between groups. In the experimental group, the lower incisors tipped lingually 2.7 mm and extruded 2.4 mm. The lingual inclination of the lower incisors increased 3.5°. The mandibular first molars tipped distally 9.1° and intruded 0.4 mm. Their cusps moved 3.4 mm distally. In the control group, the upper incisors proclined 3°, and the upper first molar extruded 2 mm. SN-MP increased 1.6° and S-Go/N-ME decreased 1. The MEAW technique combined with modified Class III elastics by maxillary mini-implants can effectively tip the mandibular molars distally without any extrusion and tip the lower incisors lingually with extrusion to camouflage skeletal Class III malocclusions. Clockwise rotation of the mandible and further proclination of upper incisors can be avoided. The MEAW technique and modified Class III elastics provided an appropriate treatment strategy especially for patients with high angle and open bite tendency.

Canine retraction: A systematic review of different methods used.

PubMed

Kulshrestha, Rohit S; Tandon, Ragni; Chandra, Pratik

2015-01-01

Canine retraction is a very important step in treatment of patients with crowding, or first premolar extraction cases. In severe crowding cases until, the canines have been distilized to relive the crowding, space to correctly align the incisors will not be available. Correct positioning of the canines after retraction is of great importance for the function, stability, and esthetics. The aim of this systematic review was to examine, in an evidence-based way, which kinds of canine retraction methods/techniques are most effective and which have the least side effects. A literature survey was performed by applying the Medline Database (Entrez PubMed) and Science Direct database covering the period from 1985 to 2014, to find out efficient ways to accomplish canine retraction. Randomized controlled trials (RCTs), prospective and retrospective controlled studies, and clinical trials were included. Two reviewers selected and extracted the data independently and assessed the quality of the retrieved studies. The search strategy resulted in 324 articles, of which 22 met the inclusion criteria. Due to the vast heterogeneity in study methods, the scientific evidence was too weak to evaluate retraction efficiency during space closure. The data so far reviewed proved that elastomeric power chains, elastic threads, magnets, NiTi coil springs, corticotomies, distraction osteogenesis, and laser therapy, all are able to provide optimum rate of tooth movements. All the methods were nearly similar to each other for retraction of canines Most of the techniques lead to anchorage loss in various amounts depending on the methods used. Most of the studies had serious problems with small sample size, confounding factors, lack of method error analysis, and no blinding in measurements. To obtain reliable scientific evidence, controlled RCT's with sufficient sample sizes are needed to determine which method/technique is the most effective in the respective retraction situation. Further studies should also consider patient acceptance and cost analysis as well as implants and minor surgeries for canine retraction.

[Control of vertical dimension in the Root technique. Part 2. Class II].

PubMed

Labarrère, H

2005-03-01

Hyperdivergent, or high angle, Class II skeletal malocclusions require a reduction in that angle so that an optimal counter-reduction of the mandible can be obtained. Four of these types of cases are analyzed here to show: in the first, treated without extractions, the limitations of this approach: the poor esthetic result derives from the incomplete retraction of incisors because of the occlusal deficits further correction would have incurred; in the second, treated with extractions of upper and lower first bicuspids, that a reduction of the angles SNM from 45 degrees to 40 degrees, FMA from 27 degrees to 24 degrees and ANB from 90 to 40 was obtained; in the third case, treated with extractions of the upper first bicuspids and the lower second bicuspids, that a counter-rotation of the mandible was required in order not to aggravate the esthetic problem while the dental deformity was being corrected. Angle SNM was reduced from 30 degrees to 25 degrees, FMA from 26 degrees to 20 degrees, and ANB from 7 degrees to 2 degrees; and, in the fourth case, where an atypical extraction scheme was elected, that an effective orthodonticsurgical alternative is available. Thanks to an anchorage conception specifically designed for this case by T. Root allowing for extraction of upper first molars, angle SNM was reduced from 38 degrees to 35 degrees, FMA was changed from 28 degrees to 23 degrees, and ANB dropped from 10 degrees to 3.5 degrees.

Evaluating the effects of consolidation on intrusion and retraction using temporary anchorage devices-a FEM study.

PubMed

Namburi, Monica; Nagothu, Sleevaraju; Kumar, Chetan S; Chakrapani, N; Hanumantharao, C H; Kumar, Supradeep K

2017-12-01

Extraction of premolars and retracting the anterior teeth using mini-implants and anterior retraction hooks became advent now a day. In such treatments, consolidation of arches is not done in regular practice. So, the present study is concentrated on effects of consolidation in two implant and three implant combinations of retraction and intrusion. A three-dimensional FEM model of maxillary teeth and periodontal ligament housed in the alveolar bone with the first premolars extracted is generated with appropriate number of elements and nodes. The models were broadly divided into two groups according to the no. of implants. Mini-implants were placed bilaterally between the second premolar and molar at varying heights (7, 10, 13 mm) in group I, and along with bilateral implants, an additional mid-implant is placed between the central incisors as group II. Brackets with 0.022 slot were placed on the teeth, 19 × 25 SS wire is placed in the brackets, an anterior retraction hook was placed at 9 mm height, and analysis was done to evaluate the stresses and displacement patterns in consolidation and non-consolidation models. The results showed that consolidation of the anterior teeth during intrusion and retraction shows various advantages such as less stresses on the bone, PDL, implant, teeth, and no labial flaring of the anterior teeth and three implant system, i.e., two bilateral implant at 10 mm and a mid-implant at 12 mm between the centrals has shown to be better than other models as bodily movement is observed. Consolidation is better than non consolidation during enmasse retraction and intrusion.

Treatment in Borderline Class III Malocclusion: Orthodontic Camouflage (Extraction) Versus Orthognathic Surgery.

PubMed

Rabie, A-Bakr M; Wong, Ricky W K; Min, G U

2008-01-01

To investigate the differences in morphological characteristics of borderline class III patients who had undergone camouflage orthodontic treatment or orthognathic surgery, and to compare the treatment effects between these two modalities. Cephalograms of 25 patients (13 orthodontic, 12 surgical) with class III malocclusion were analyzed. All had a pretreatment ANB angle greater than -5 masculine. Using discriminant analysis, only Holdaway angle was selected to differentiate patients in the pretreatment stage. Seventy-two per cent patients were correctly classified. In the orthodontic group, reverse overjet was corrected by retraction of the lower incisors and downward and backward rotation of the mandible. The surgical group was corrected by setback of the lower anterior dentoalveolus and uprighting of the lower incisors. No difference was found in posttreatment soft tissue measurements between the two groups. Twelve degree for the Holdaway angle can be a guideline in determining the treatment modalities for borderline class III patients, but the preferences of operators and patients are also important. (2) Both therapeutic options should highlight changes in the lower dentoalveolus and lower incisors. (3) Both treatment modalities can achieve satisfactory improvements to the people.

Orthodontic decompensation in class III patients by means of distalization of upper molars.

PubMed

Carlos, Villegas B; Giovanni, Oberti; Diego, Rey; Angela, Sierra; Baccetti, Tiziano

2009-01-01

Pre-surgical orthodontic treatments have the objective of establishing harmony between the dental arches by moving the teeth to ideal positions in relation to their bony bases, in order to achieve adequate antero-posterior occlusal and transverse relationships at the moment of surgery. Among the typical requirements in terms of dental compensations presented by Class III patients that require surgery, the inclination of anterior teeth must be changed in most cases by proclination of the lower incisors and retroclination of upper incisors. To achieve the inclination of the upper incisors, many different alternatives have been proposed, such as inter-proximal reduction, extractions, or distalization of upper molars, which has not been widely reported in the literature as a means to decompensate Class III malocclusion prior to surgery. This article describes the Bone Supported Pendulum (BSP) as an efficient therapeutic option to distalize molars through the use of an appliance stabilized to the palate by mini-implants, thus avoiding extractions and providing good interdigitation and coordination of the dental arches.

Severe root resorption resulting from orthodontic treatment: Prevalence and risk factors

PubMed Central

Maués, Caroline Pelagio Raick; do Nascimento, Rizomar Ramos; Vilella, Oswaldo de Vasconcellos

2015-01-01

OBJECTIVE: To assess the prevalence of severe external root resorption and its potential risk factors resulting from orthodontic treatment. METHODS: A randomly selected sample was used. It comprised conventional periapical radiographs taken in the same radiology center for maxillary and mandibular incisors before and after active orthodontic treatment of 129 patients, males and females, treated by means of the Standard Edgewise technique. Two examiners measured and defined root resorption according to the index proposed by Levander et al. The degree of external apical root resorption was registered defining resorption in four degrees of severity. To assess intra and inter-rater reproducibility, kappa coefficient was used. Chi-square test was used to assess the relationship between the amount of root resorption and patient's sex, dental arch (maxillary or mandibular), treatment with or without extractions, treatment duration, root apex stage (open or closed), root shape, as well as overjet and overbite at treatment onset. RESULTS: Maxillary central incisors had the highest percentage of severe root resorption, followed by maxillary lateral incisors and mandibular lateral incisors. Out of 959 teeth, 28 (2.9%) presented severe root resorption. The following risk factors were observed: anterior maxillary teeth, overjet greater than or equal to 5 mm at treatment onset, treatment with extractions, prolonged therapy, and degree of apex formation at treatment onset. CONCLUSION: This study showed that care must be taken in orthodontic treatment involving extractions, great retraction of maxillary incisors, prolonged therapy, and/or completely formed apex at orthodontic treatment onset. PMID:25741825

Severe root resorption resulting from orthodontic treatment: prevalence and risk factors.

PubMed

Maués, Caroline Pelagio Raick; do Nascimento, Rizomar Ramos; Vilella, Oswaldo de Vasconcellos

2015-01-01

To assess the prevalence of severe external root resorption and its potential risk factors resulting from orthodontic treatment. A randomly selected sample was used. It comprised conventional periapical radiographs taken in the same radiology center for maxillary and mandibular incisors before and after active orthodontic treatment of 129 patients, males and females, treated by means of the Standard Edgewise technique. Two examiners measured and defined root resorption according to the index proposed by Levander et al. The degree of external apical root resorption was registered defining resorption in four degrees of severity. To assess intra and inter-rater reproducibility, kappa coefficient was used. Chi-square test was used to assess the relationship between the amount of root resorption and patient's sex, dental arch (maxillary or mandibular), treatment with or without extractions, treatment duration, root apex stage (open or closed), root shape, as well as overjet and overbite at treatment onset. Maxillary central incisors had the highest percentage of severe root resorption, followed by maxillary lateral incisors and mandibular lateral incisors. Out of 959 teeth, 28 (2.9%) presented severe root resorption. The following risk factors were observed: anterior maxillary teeth, overjet greater than or equal to 5 mm at treatment onset, treatment with extractions, prolonged therapy, and degree of apex formation at treatment onset. This study showed that care must be taken in orthodontic treatment involving extractions, great retraction of maxillary incisors, prolonged therapy, and/or completely formed apex at orthodontic treatment onset.

Skeletal and dental stability after maxillary distraction with a rigid external device in adult cleft lip and palate patients.

PubMed

Aksu, Muge; Saglam-Aydinatay, Banu; Akcan, Cenk Ahmet; El, Hakan; Taner, Tulin; Kocadereli, Ilken; Tuncbilek, Gokhan; Mavili, Mehmet Emin

2010-02-01

To evaluate skeletal and dental stability in adult cleft lip and palate patients treated with a rigid external distraction system at the end of distraction and during the postdistraction period. Lateral cephalograms of 7 patients were obtained before distraction, at the end of distraction, and during the postdistraction period. The mean age before distraction was 21.56 +/- 4.73 years. The mean follow-up was 37.3 +/- 12.4 months. The assessment of findings showed that skeletal maxillary sagittal movement was achieved in a superoanterior direction. The maxillary depth angle and effective maxillary length increased significantly (2 degrees and 9 mm, respectively) after distraction, whereas the palatal plane angle increased by 8 degrees , resulting in an anterior movement of the maxilla with a counterclockwise rotation. The lower facial height showed no significant changes after distraction. The sagittal movement of the upper incisors and the angulation of the upper first molars increased significantly (4.5 mm and 5.5 degrees , respectively). During the postdistraction period, the maxilla showed a slight relapse (22%). The effective maxillary length decreased by 2 mm. The palatal plane angle almost returned to its original position, showing 7 degrees of clockwise rotation. The lower facial height remained stable. The upper incisors moved anteriorly and the upper first molars showed a significant mesioangular change during follow-up. After distraction, significant maxillary advancement was achieved with a counterclockwise rotation. The upper incisors moved labially, and the upper first molars angulated mesially. After 3 years, a 22% relapse rate was seen in the maxilla. The counterclockwise rotation of the maxilla was returned to its original position. The upper incisors moved more anteriorly. Copyright 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

75 FR 12710 - Airworthiness Directives; Bombardier, Inc., Model DHC-8-400 Series Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... for the main landing gear lock actuator assembly, retraction actuator assembly rod end and piston, and... for the main landing gear lock actuator assembly, retraction actuator assembly rod end and piston, and..., retraction actuator assembly rod end and piston, and the upper bearing in the main landing gear shock strut...

Applicability of Berry's index in bite mark analysis

PubMed Central

Antony, Palathottungal Joseph; Pillai, Karthigakannan Subramanian; George, Giju Baby; Varghese, Thomas; Puthalath, Mohammed Shibin; Arakkal, Leena Johnson

2015-01-01

Objectives: This study attempts to highlight the usefulness of applying Berry's Index as an adjuvant to support and aid in bite analysis. Materials and Methods: This study was conducted among 100 students between the ages of 18–30 from Mar Baselios Dental Collage, Kothamangalam. Out of the 100 subjects, there were 50 males and 50 females. The data obtained was tabulated and analyzed using Statistical Package for Social Sciences, Version 16 (SPSS). Results: The mean value of the width of the upper central incisor for male and female was 0.7602 cm and 0.7765 cm respectively. The mean value of the bizygomatic width for male and female was 12.54 cm and 12.42 cm respectively. The correlation between the upper central incisor width and the bizygomatic width was inferred to have a good positive correlation with a value 0f 0.613. Pearson correlation coefficient with greater correlation between the upper central incisor width and the bizygomatic width in female patient (r = 0.678) compared with male patient (r = 0. 525). Conclusion: Berry's Index can be a useful adjuvant to bite analysis by providing a means of determining the facial proportions of an individual from the width of the central incisors. PMID:25709316

Lip line preference for variant face types.

PubMed

Anwar, Nabila; Fida, Mubassar

2012-06-01

To determine the effect of altered lip line on attractiveness and to find preferred lip line for vertical face types in both genders. Cross-sectional analytical study. The Aga Khan University Hospital, Karachi, from May to July 2009. Photographs of two selected subjects were altered to produce three face types for the same individual with the aim of keeping the frame of the smile constant. Lip line was then altered for both the subjects as: both dentitions visible, upper incisors visible, upper incisors and 2 mm gum and 4 mm gum visible. The pictures were rated by different professionals for attractiveness. Descriptive statistics for the raters and multiple factor ANOVA was used to find the most attractive lip line. The total number of raters was 100 with the mean age of 30.3 ± 8 years. The alterations in the smile parameters produced statistically significant difference in the attractiveness of faces, whereas the perception difference was found to be insignificant amongst raters of different professions. Preferred lip line was the one showing only the upper incisors in dolico and mesofacial male and female genders whereas 2 mm gum show was preferred in brachyfacial subjects. The variability in lip line showed significant difference in the perceived attractiveness. Preferred lip lines as the one showing only the upper incisors in dolico and mesofacial male and female genders whereas 2 mm gum show was preferred in brachyfacial subjects.

Levator Muscle Enlargement in Thyroid Eye Disease-Related Upper Eyelid Retraction.

PubMed

Davies, Michael J; Dolman, Peter J

To identify levator palpebrae superioris enlargement in thyroid eye disease (TED)-related upper eyelid retraction (ULR). Retrospective case-control. Subjects included 50 consecutive patients with unilateral thyroid eye disease-related ULR ≥ 2 mm and no previous eyelid surgery. The contralateral side was used as control. Clinical information was recorded from charts. CT scans were assessed by investigators blinded to the clinical data. A prediction of retracted side was made based on CT scan appearance and on basis of measured levator palpebrae superioris cross-sectional area at 2 defined points. Statistical analysis determined correlation between levator palpebrae superioris size and presence of ULR. The study was approved by the institutional ethics committee. Side with ULR predicted from CT scan review in over 85% of cases. Mean cross-sectional area of levator palpebrae superioris on retracted side was significantly larger than nonretracted side at 2 separate sites. Levator palpebrae superioris area was larger on retracted side compared with nonretracted side in over 85% of subjects. More than 30% of subjects had no enlargement of other extraocular muscles. Only 6% of patients had enlargement of the ipsilateral inferior rectus muscle. Levator palpebrae superioris enlargement from inflammation or scar is a factor in thyroid eye disease-related ULR. Upper eyelid retraction can be predicted from CT scan appearance in over 85% of cases. Ipsilateral inferior rectus enlargement is rare. Levator palpebrae superioris is the most commonly targeted muscle in thyroid eye disease.

[Treatment of eyelid retraction in Grave's disease by recession of the levator complex].

PubMed

Fichter, N; Schittkowski, M; Guthoff, R F

2004-11-01

The chronic stage in Grave's orbitopathy is characterised by fibrotic changes within the orbital soft tissues, especially the extraocular muscles. Retraction of the eyelids is a common clinical feature of this phenomenon. To solve this problem several techniques for lengthening the upper eyelid have been described with variable rates of success. In this report we describe our modified Harvey's technique for the correction of upper eyelid retraction which includes a complete recession of the Muller's muscle/levator complex from the tarsal plate without the interposition of a spacer. Finally only the skin and the superficial orbicularis muscle are sutured. We also report about our results with this procedure. 8 patients (1 male, 7 female) with lid retraction in Grave's ophthalmopathy were recorded who had undergone the modified lengthening technique by an external approach between 2001 and 2004. Four patients underwent a bilateral procedure and 1 patient showed a significant under-correction, necessitating reoperation. So a total of 13 procedures were included in this follow-up study. Beside the common ophthalmological examination, special interest was put in the difference of the two eyelid apertures in primary position pre- and postoperatively. Within a follow-up period of at least 3 months we recorded an averaged lengthening of the upper eyelid of 3.1 mm. The difference of the two eyelid apertures in primary position improved from 2.2 mm preoperatively to 1.0 mm postoperatively. Only 1 patient needed reoperation because of a significant under-correction. There were no late over-corrections observed. The modified Harvey's technique to lengthen the upper eyelid is a safe and effective method to reduce upper eyelid retraction in Grave's disease. An eventually required orbital decompression or extraocular muscle surgery has to be done before the lid surgery.

Skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances and lower premolar extractions.

PubMed

Abu Alhaija, Elham S J; Al-Khateeb, Susan N

2011-05-01

Mild Class III malocciusions can be treated by upper incisor proclination and lower incisor retroclination following extraction of the lower first premolars. To compare the skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances, Class III traction and lower first premolar extractions with the changes in a group of untreated Class III patients. The Treatment group consisted of 30 Class III patients (Mean age 13.69 +/- 1.48 years) who were treated by upper and lower fixed appliances, Class III intermaxillary traction and lower first premolar extractions for 2.88 +/- 1.12 years. The Control group consisted of 20 untreated Class III patients (Mean age 13.51 +/- 0.95) matched for age and gender. The T1 to T2 changes in the treated and untreated groups were compared using a paired t-test while differences between the two groups were compared with an independent t-test. During treatment, the upper incisors were proclined about 1 degree and the lower incisors were retroclined 8 degrees. Small, but statistically significant changes in SNB, Wits and the overlying soft tissues accompanied the changes in incisor inclination. At the end of treatment a positive overbite and overjet were achieved. The increase in lower facial height in the Treatment group was comparable with the change in the Control group. A range of mild to moderate Class III malocclusions can be treated by dentoalveolar compensation.

Initial forces experienced by the anterior and posterior teeth during dental-anchored or skeletal-anchored en masse retraction in vitro.

PubMed

Lee, David; Heo, Giseon; El-Bialy, Tarek; Carey, Jason P; Major, Paul W; Romanyk, Dan L

2017-07-01

To investigate initial forces acting on teeth around the arch during en masse retraction using an in vitro Orthodontic SIMulator (OSIM). The OSIM was used to represent the full maxillary arch in a case wherein both first premolars had been extracted. Dental and skeletal anchorage to a posted archwire and skeletal anchorage to a 10-mm power arm were all simulated. A 0.019 × 0.025-inch stainless steel archwire was used in all cases, and 15-mm light nickel-titanium springs were activated to approximately 150 g on both sides of the arch. A sample size of n = 40 springs were tested for each of the three groups. Multivariate analysis of variance (α = 0.05) was used to determine differences between treatment groups. In the anterior segment, it was found that skeletal anchorage with power arms generated the largest retraction force (P < .001). The largest vertical forces on the unit were generated using skeletal anchorage, followed by skeletal anchorage with power arms, and finally dental anchorage. Power arms were found to generate larger intrusive forces on the lateral incisors and extrusive forces on the canines than on other groups. For the posterior anchorage unit, dental anchorage generated the largest protraction and palatal forces. Negligible forces were measured for both skeletal anchorage groups. Vertical forces on the posterior unit were minimal in all cases (<0.1 N). All retraction methods produced sufficient forces to retract the anterior teeth during en masse retraction. Skeletal anchorage reduced forces on the posterior teeth but introduced greater vertical forces on the anterior teeth.

Treatment in Borderline Class III Malocclusion: Orthodontic Camouflage (Extraction) Versus Orthognathic Surgery

PubMed Central

Rabie, A-Bakr M.; Wong, Ricky W.K.; Min, G.U.

2008-01-01

Aims: To investigate the differences in morphological characteristics of borderline class III patients who had undergone camouflage orthodontic treatment or orthognathic surgery, and to compare the treatment effects between these two modalities. Materials and Methods: Cephalograms of 25 patients (13 orthodontic, 12 surgical) with class III malocclusion were analyzed. All had a pretreatment ANB angle greater than -5º. Results: Using discriminant analysis, only Holdaway angle was selected to differentiate patients in the pretreatment stage. Seventy-two per cent patients were correctly classified. In the orthodontic group, reverse overjet was corrected by retraction of the lower incisors and downward and backward rotation of the mandible. The surgical group was corrected by setback of the lower anterior dentoalveolus and uprighting of the lower incisors. No difference was found in posttreatment soft tissue measurements between the two groups. Conclusions: Twelve degree for the Holdaway angle can be a guideline in determining the treatment modalities for borderline class III patients, but the preferences of operators and patients are also important. (2) Both therapeutic options should highlight changes in the lower dentoalveolus and lower incisors. (3) Both treatment modalities can achieve satisfactory improvements to the people. PMID:19088881

Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern.

PubMed

Farret, Marcel Marchiori

2016-06-01

This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) as one of the requirements to become diplomate by the BBO.

Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern

PubMed Central

Farret, Marcel Marchiori

2016-01-01

ABSTRACT This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) as one of the requirements to become diplomate by the BBO. PMID:27409659

The use of cortical screw anchorage for closing a space resulting from the loss of a lower molar--a case report.

PubMed

Janiszewska-Olszowska, Joanna; Socha, Alina; Bińczak, Paulina

2013-01-01

Orthodontic microscrews are temporary implants providing skeletal anchorage, which may be used for en-masse incisor retraction, as well as for the protraction of posterior segments in order to close spaces without retracting anterior teeth. A patient, aged 16 was reported in whom a miniscrew of 9.5 mm length and 2 mm dimension was inserted distal to the lower left second premolar 2 months after extracting the first molar with periapical bone lesion after failed endodontic treatment. The lower third molar was mesialised using direct anchorage and a power arm to minimize mesial tipping. The space closed within 20 months, followed by a spontaneous eruption of the adjacent third molar. This treatment method constitutes a good alternative to third molar autotransplantation, allowing the avoidance of the risk of surgical procedure.

[Maxillary advancement osteotomy with sequelae cleft lip and palate: Dilemma between occlusion and aesthetic profile].

PubMed

Vigneron, A; Morand, B; Lafontaine, V; Lesne, V; Lesne, C; Bettega, G

2015-11-01

Maxillary hypoplasia is a common sequela of cleft lip and palate. Its surgical treatment consists in a maxillary advancement by distraction or by conventional orthognathic surgery but morphological results are unpredictable. Our goal in this study was to see if the esthetical results (on the lip and the nose) of maxillary advancement were correlated to the preservation of lateral incisor space of the cleft side. This retrospective study included 38 patients operated between 2002 and 2013. Unilateral clefts were studied independently from bilateral clefts. Profile aesthetics was evaluated independently and subjectively by two surgeons and scored on an 8-point scale. The result was classified as "good" if the score was superior or equal to 6. The score was correlated to the following parameters: amount of maxillary advancement, upper incisor axis, preservation of the missing lateral incisor space. In the "good result" group, the space of the lateral incisor was less often preserved. The nasolabial angle was more open and the upper central incisor axis more vertical. These results were more pronounced in bilateral clefts, but also found in unilateral clefts. Under reservation of the subjective evaluation and of the small number of patients, it seemed that lateral incisor space closure improved the profile of patients treated by maxillary advancement for cleft lip and palate sequelae. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Molar incisor hypomineralization: proportion and severity in primary public school children in Graz, Austria.

PubMed

Buchgraber, Barbara; Kqiku, Lumnije; Ebeleseder, Kurt A

2018-03-01

The aim of this study was to determine the proportion and severity of molar incisor hypomineralization (MIH) in primary school children in Graz (southeast of Austria). In 1111 children aged 6 to 12 years (mean age 9.0 ± 1.2), a wet examination of all teeth was performed by three trained examiners using a dental chair, optimal illumination, a dental mirror, and a dental explorer. All teeth with MIH lesions were registered so that different definitions of MIH were applicable. According to the European Academy of Pediatric Dentistry criteria that were considered valid at the time of the investigation, MIH was diagnosed when at least one first primary molar (FPM) was affected. MIH was present in 78 children (7.0%). In 64 children (5.8%), at least one molar and one incisor were affected (so-called M + IH). Additionally, in 9 children, only incisors were affected. In 7 affected children, teeth other than FPMs and incisors had MIH lesions. Almost an equal number of males (38) and females (40) were affected. The upper and lower molars were equally affected. The upper incisors were more frequently affected than the lower ones. Demarcated enamel opacities were the predominant types of defects. The proportion of MIH was 7.0% in Graz, which is similar to other comparable trials. This study has proven that MIH is an existing dental problem in Graz.

Effect of bracket slot and archwire dimensions on anterior tooth movement during space closure in sliding mechanics: a 3-dimensional finite element study.

PubMed

Tominaga, Jun-ya; Ozaki, Hiroya; Chiang, Pao-Chang; Sumi, Mayumi; Tanaka, Motohiro; Koga, Yoshiyuki; Bourauel, Christoph; Yoshida, Noriaki

2014-08-01

It has been found that controlled movement of the anterior teeth can be obtained by attaching a certain length of power arm onto an archwire in sliding mechanics. However, the impact of the archwire/bracket play on anterior tooth movement has not been clarified. The purpose of this study was to compare the effect of the power arm on anterior tooth movements with different dimensions of bracket slots and archwires. A 3-dimensional finite element method was used to simulate en-masse anterior tooth retraction in sliding mechanics. Displacements of the maxillary central incisor and the archwire deformation were calculated when applying retraction forces from different lengths of power arms. When a 0.017 × 0.022-in archwire was engaged into the 0.018-in slot bracket, bodily movement of the incisor was obtained with 9.1-mm length of the power arm. When a 0.022-in slot system was coupled with a 0.019 × 0.025-in archwire, bodily movement was observed with a power arm length of 11.6 mm. Archwire/bracket play has a remarkable impact on anterior tooth movement. An effective torque application to the anterior teeth becomes clinically difficult in sliding mechanics combined with power arms when the archwire/bracket play is large. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

A comparative anchorage control study between conventional and self-ligating bracket systems using differential moments.

PubMed

de Almeida, Marcio Rodrigues; Herrero, Francisco; Fattal, Amine; Davoody, Amirparviz R; Nanda, Ravindra; Uribe, Flavio

2013-11-01

To compare the efficiency in anchorage preservation of conventional and self-ligating brackets after the extraction of first maxillary premolars using differential moment mechanics. Thirty-eight patients requiring extraction of maxillary first premolars and maximum anchorage during space closure were evaluated based on bracket type. Group 1, comprising 23 patients, was bonded with preadjusted conventional brackets (CBs) with a slot of 0.022-inch × 0.030-inch. Group 2 comprised 15 patients who were bonded with 0.022 inch preadjusted self-ligating brackets (SLBs). Patients in both groups received a nickel titanium (NiTi) intrusion arch and a 150 g NiTi closing coil spring for separate canine retraction, followed by a continuous mushroom loop archwire to retract the incisors. Lateral cephalograms were available at the start of treatment (T1) and at the completion of space closure (T2). Statistical comparisons were performed with paired and unpaired Student's t-tests. No significant differences were found between the groups in maxillary molars anchorage loss (3.87 ± 1.35 mm and 3.65 ± 1.73 mm for the CB and SLB groups, respectively). Only the mean vertical movement of the tip of the incisor was significantly different between the groups (CB  =  -0.92 ± 1.46 mm; SLB  =  0.56 ± 1.65 mm). There were no significant differences in the amount of anchorage loss of the maxillary first molars between SLB and CB systems during space closure using differential moments.

[Combination of periodontal, orthodontic and endodontic therapy in upper anterior teeth with hopeless prognosis and long-time follow-up: a case report].

PubMed

Li, Y; Xu, L; Zhou, Y H; Ouyang, X Y; Cao, T

2017-08-18

It is complicated to decide the treatment plan of hopeless anterior teeth in esthetic zone due to severe periodontitis, periodontal-endodontic combined lesion or teeth trauma. The optional treatment plan for this kind of teeth includes retention after periodontal treatment, extraction and implant treatment, extraction and prosthodontic treatment and so on. To make an appropriate treatment plan, patients' periodontal conditions, periodontal biotype, local anatomy, esthetic demand, economic condition and social psychological status should be comprehensively considered. A combine of periodontal, endodontic and orthodontic therapy may achieve a good treatment effect in hopeless anterior teeth with severe periodontal destruction, tooth extrusion and occlusal trauma. In this case, a 20-year-old female who presented with symptoms of bleeding on brushing and upper incisors loosening for 1 month came to the Department of Periodontology, Peking University School and Hospital of Stomatology. The clinical examinations revealed that the patient's right upper incisor had signs of mobility (III°), intrusion of 1-2 mm, and probing depth (PD) of 9-10 mm. The periapical radiograph showed that the alveolar bone of right upper incisor absorbed horizontally to the apex. And the patients showed Angle II° malocclusion with II° overbite in anterior teeth and maxillary protrusion. A diagnosis of aggressive periodontitis and Angle II° malocclusion was made. The treatment of this patient lasts for 5 years which include periodontal initial therapy, orthodontic therapy, guided tissue regeneration (GTR) of right upper incisor and supportive periodontal therapy and the clinical result is fine. A hopeless upper incisor was successfully retained and the longtime clinical condition was stable. The strategy of retention of hopeless upper anterior teeth, the relationship of periodontal treatment and orthodontic treatment, and the indications of periodontal and orthodontic combined therapy were also discussed on the basis of this case. Generally, the positive factors in retention of hopeless teeth includes young age, absence of systemic conditions, strong motivation for maintaining the tooth, single root anatomy, integrated dentition, good response to cause-related therapy, intrabony alveolar bone defect, thick periodontal biotype, and regular supportive periodontal therapy. And in the progress of orthodontic therapy, regular supportive periodontal therapy and good plaque control is extremely important.

[Orthodontic effects of tooth injury to the permanent and temporary incisors of children and the adolescent [corrected].

PubMed

Bassigny, F

1990-01-01

Traumatisms on the deciduous upper incisors could induce orthodontic indirect consequences on the permanent germ, dependent on his growth level and his malleability, dependent on connection between the root of deciduous incisor and the crown of permanent germ and according to the type of traumatism. According to those various data, it should be observed on the permanent incisor: germination of two germs, multiple odontoma, crown dilaceration, severe tipping of the crown with facial angulation, retention of the permanent germ with lack of root resorption of the deciduous teeth or simple cross-bite, without speaking of enamel defect.

Rapid Palatal Expansion in the absence of posterior cross-bite to intercept maxillary incisor crowding in the mixed dentition: a CBCT evaluation of spontaneous changes of untouched permanent molars.

PubMed

Rosa, M; Lucchi, P; Manti, G; Caprioglio, A

2016-12-01

The aim of this study was to investigate the reaction of untouched permanent molars following RPE, anchored on deciduous teeth in the early mixed dentition, aimed to solve maxillary anterior crowding in the absence of posterior cross-bite. A prospective clinical trial comprised 35 consecutive patients (20 males and 15 females) treated by the same orthodontist (MR). All patients showed crowding of the upper permanent incisors in the early mixed dentition in the absence of posterior cross-bite. RPE was anchored on second deciduous molars and on the deciduous canines. CBCT was taken before and after the removal of the RPE appliance. The transverse linear changes in width and the variation in the torque of the permanent molars were measured in the coronal plane. Relief of incisor crowding was found in all patients. The transverse width between permanent molars increased significantly. The apices of the upper permanent molars spontaneously expanded more than the crowns, while the opposite happened on the lower permanent molars. Moreover, the untouched upper permanent molars spontaneously uprighted palatally, while the lower permanent molars spontaneously uprighted buccally. The variation in the torque of the permanent molars mirrored transverse normal growth. In the early mixed dentition and in the absence of posterior cross-bite, it is possible to expand transversally the palate while uprighting the upper permanent molars in the opposite direction. RPE anchored on the deciduous teeth in the early mixed dentition, in the absence of posterior cross-bite, provides an "anticipation of transverse growth" and could be indicated to expand the anterior portion of the maxillary arch perimeter to solve upper incisor crowding.

Randomized clinical trial comparing control of maxillary anchorage with 2 retraction techniques.

PubMed

Xu, Tian-Min; Zhang, Xiaoyun; Oh, Hee Soo; Boyd, Robert L; Korn, Edward L; Baumrind, Sheldon

2010-11-01

The objective of this pilot randomized clinical trial was to investigate the relative effectiveness of anchorage conservation of en-masse and 2-step retraction techniques during maximum anchorage treatment in patients with Angle Class I and Class II malocclusions. Sixty-four growing subjects (25 boys, 39 girls; 10.2-15.9 years old) who required maximum anchorage were randomized to 2 treatment techniques: en-masse retraction (n = 32) and 2-step retraction (n = 32); the groups were stratified by sex and starting age. Each patient was treated by a full-time clinic instructor experienced in the use of both retraction techniques at the orthodontic clinic of Peking University School of Stomatology in China. All patients used headgear, and most had transpalatal appliances. Lateral cephalograms taken before treatment and at the end of treatment were used to evaluate treatment-associated changes. Differences in maxillary molar mesial displacement and maxillary incisor retraction were measured with the before and after treatment tracings superimposed on the anatomic best fit of the palatal structures. Differences in mesial displacement of the maxillary first molar were compared between the 2 treatment techniques, between sexes, and between different starting-age groups. Average mesial displacement of the maxillary first molar was slightly less in the en-masse group than in the 2-step group (mean, -0.36 mm; 95% CI, -1.42 to 0.71 mm). The average mesial displacement of the maxillary first molar for both treatment groups pooled (n = 63, because 1 patient was lost to follow-up) was 4.3 ± 2.1 mm (mean ± standard deviation). Boys had significantly more mesial displacement than girls (mean difference, 1.3 mm; P <0.03). Younger adolescents had significantly more mesial displacement than older adolescents (mean difference, 1.3 mm; P <0.02). Average mesial displacement of the maxillary first molar with 2-step retraction was slightly greater than that for en-masse retraction, but the difference did not reach statistical significance. This finding appears to contradict the belief of many clinicians that 2-step canine retraction is more effective than en-masse retraction in preventing clinically meaningful anchorage loss. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Dental transposition of canine and lateral incisor and impacted central incisor treatment: A case report

PubMed Central

Gebert, Tarcisio Jacinto; Palma, Vinícius Canavarros; Borges, Alvaro Henrique; Volpato, Luiz Evaristo Ricci

2014-01-01

Introduction Dental transposition and impaction are disorders related to ectopic eruption or failure in tooth eruption, which can affect child physical, mental and social development and may be difficult to be clinically solved. Methods We describe a case of transposition between the upper left canine and lateral incisor associated with impaction of the central incisor on the same side, in a 12-year-old patient. Conservative treatment involving surgical-orthodontic correction of transposed teeth and traction of the central incisor was conducted. Conclusion The option of correcting transposition and orthodontic traction by means of the segmented arch technique with devices such as cantilever and TMA rectangular wire loops, although a complex alternative, was proved to be esthetically and functionally effective. PMID:24713567

Unusual extraction treatment in Class II division 1 using C-orthodontic mini-implants.

PubMed

Chung, Kyu-Rhim; Cho, Jae-Hee; Kim, Seong-Hun; Kook, Yoon-Ah; Cozzani, Mauro

2007-01-01

This paper describes the treatment of a female patient, aged 23 years and 5 months, with a Class II division 1 malocclusion, who showed severe anterior protrusion and lower anterior crowding. Specially-designed orthodontic mini-implants were placed bilaterally in the interdental space between both the upper and the lower posterior teeth. Both lower first molars showed severe apical lesions. Therefore, the treatment plan consisted of extraction of both upper first premolars and lower first molars, en masse retraction of the upper six anterior teeth, lower anterior alignment, and protraction of all the lower molars. C-implants(R) were used as substitutes for maxillary posterior anchorage teeth during anterior retraction and as hooks for mandibular molar protraction. The correct overbite and overjet were obtained by intruding and retracting the upper six anterior teeth into their proper positions. The dentition was detailed using conventional orthodontic appliances. The upper C-implants contributed to an improvement in facial balance, and the lower C-implants made it possible to protract the lower second and third molars with less effect on the axis of the lower anterior teeth. The active treatment period was 29 months and the patient's teeth continued to be stable 11 months after debonding.

[Thumbsucking and malocclusion--presentation of a clinical case].

PubMed

Estripeaut, L E; Henriques, J F; de Almeida, R R

1989-01-01

The digital sucking habit have been significantly related with the malocclusions. These problems can be observed as in the deciduous and mixed as in the permanent dentition. Frequency, length, and intensity of the habit generate as a consequence: anterior open bite, retrusion of the mandible, protrusion of the maxilla, excessive overjet, labial version of the upper incisors, uprighting of the lower incisors, posterior cross bites, sometimes associated to a ogival palate, diastema between the upper incisors, and any others facial characteristics. According to various authors, when the habit persist for an extended period after the age of four years, is considered how malocclusion cause. In this case is requered the professional interference. The presentation of this study has the objective to show the clinic conduct for preventive orthodontics in face to cases who exhib harmful habits.

Maxillary canine impactions related to impacted central incisors: two case reports.

PubMed

Bayram, Mehmet; Ozer, Mete; Sener, Ismail

2007-09-01

The purpose of this case report is to describe the combined surgical and orthodontic treatment of two cases with an impacted maxillary central incisor and canine in the same quadrant and to discuss the causal relationship between them. The most common causes of canine impactions are usually the result of one or more factors such as a long path of eruption, tooth size-arch length discrepancies, abnormal position of the tooth bud, prolonged retention or early loss of the deciduous canine, trauma, the presence of an alveolar cleft, ankylosis, cystic or neoplastic formation, dilaceration of the root, supernumerary teeth, and odontomas. Although impaction of the maxillary central incisor is almost as prevalent as impacted canines its etiology is different. The principal factors involved in causing the anomaly are supernumerary teeth, odontomas, and trauma. Case #1: A 10.5-year-old girl in the early mixed dentition stage presented with a chief complaint of the appearance of her anterior teeth. She had a Class I skeletal pattern and a history of trauma to the maxillary central incisors at age five with premature exfoliation. Radiographs revealed an impacted upper right central incisor in the region of the nasal floor, delayed eruption of the maxillary permanent central incisor, and the adjacent lateral incisor was inclined toward the edentulous space. Treatment was done in two stages consisting of surgical exposure and traction of the impacted central incisor and fixed orthodontic treatment. Case #2: An 11.5-year-old girl presented for orthodontic treatment with the chief complaint of an unerupted tooth and the appearance of her upper anterior teeth. She was in the late mixed dentition period with a Class III skeletal pattern along with an anterior cross-bite with some maxillary transverse deficiency. The maxillary right canine and central incisor were absent, but the maxillary right deciduous canine was still present. Treatment included arch expansion followed by surgical exposure and traction of the impacted teeth and fixed orthodontic treatment. This case report provides some evidence of a significant environmental influence of an impacted maxillary central incisor on the path of eruption of the ipsilateral maxillary canine. When an impacted maxillary central incisor exists, the maxillary lateral incisor's root might be positioned distally into the path of eruption of the maxillary canine preventing its normal eruption. Ongoing assessment and early intervention might help to prevent such adverse situations from occurring.

Effect of double-fold surgery on spontaneous resolution of Graves' upper eyelid retraction.

PubMed

Kim, Dong Kyu; Choi, Moonjung; Yoon, Jin Sook

2015-02-01

To investigate the effect of previous incisional double-fold surgery on spontaneous resolution of eyelid retraction caused by Graves orbitopathy (GO) in Asian individuals. Retrospective review of medical records. Patients (N = 30; 39 eyes) with eyelid retraction associated with GO with symptom duration of less than 6 months. Patients who visited the Ophthalmology Department of Severance Hospital, Yonsei University, between January 2010 and December 2011, followed up for more than 6 months and in a euthyroid state with antithyroid drug treatment were included. Patients treated with steroids or who underwent surgery during follow-up were excluded. Upper scleral show was measured as the distance between the central upper lid margin and limbus at initial presentation and after 6 months. Comparative analysis was performed between the 2 groups delineated by history (n = 12; 16 eyes), or lack thereof (n = 18; 23 eyes), of incisional double-fold surgery before onset of GO symptoms and signs. Patient demographics and initial upper scleral show were not significantly different between groups. In both groups, upper scleral show significantly decreased at 6 months of follow-up (p < 0.001 in both groups); however, improvement of upper scleral show was significantly reduced in patients who had undergone previous double-fold surgery (0.8 ± 0.5 mm) than in nonsurgical patients (1.8 ± 0.5 mm; p < 0.001). Graves eyelid retraction resolves spontaneously over time, albeit not completely. Previous double-fold surgery hinders the degree of spontaneous resolution, probably because of the fibrosis and cicatrization between the skin, the subcutaneous layer, and the levator complex. Copyright © 2015 Canadian Ophthalmological Society. Published by Elsevier Inc. All rights reserved.

A study of Class III treatment: orthodontic camouflage vs orthognathic surgery.

PubMed

Georgalis, Katherine; Woods, Michael G

2015-11-01

To evaluate the differences in pretreatment and post-treatment characteristics of Class III patients treated with orthodontic camouflage or orthognathic surgery, and to compare the range of skeletal, dental and soft tissue changes that are likely to occur with treatment, with particular reference to the influence of extractions on the resultant incisor angulations. Pretreatment and post-treatment cephalograms of 31 Class III orthodontically-camouflaged patients and 36 Class III surgical patients (without genioplasty) were obtained from one specialist practice. From the surgical group, 26 pre-surgical lateral cephalograms were also obtained. Inclusion criteria for the two groups were at least three of the following: (1) an ANB angle of 1 degree or less, (2) a Wits appraisal less than -4 mm, (3) an incisal overjet ≤ 0 mm, and (14) a Class III molar relationship. All lateral cephalograms were traced and digitised and a number of skeletal, dental and soft tissue variables were measured. The camouflage and surgical groups were also divided into premolar extraction and non-extraction subgroups to allow for a specific analysis of extraction effects. Before treatment, the surgical group demonstrated, on average, a more severe skeletal discrepancy and increased dental compensations, compared with the orthodontically camouflaged group. After treatment, the mean SNA angle was greater, the ANB angle was more positive, the Wits appraisal was closer to ideal and the lower incisors were less retroclined in the surgery group. There was a small mean reduction in horizontal chin projection in the surgery group compared with a small increase in the camouflage group. The mentolabial fold and the lower lip curve were deeper, on average, and the lips less retrusive after surgery. There was a mean increase in upper incisor proclination during treatment in both the surgical and camouflage groups with a greater increase in the camouflage group. There was a significant reduction in upper incisor proclination and a subsequent greater increase in the ANB angle associated with upper premolar extractions in the surgical group compared with the non-extraction group. Lower premolar extractions in the camouflage group resulted only in a deeper mentolabial fold compared with those treated without lower extractions. Class III patients selected for surgical treatment are likely to have more severe pretreatment dental and skeletal discrepancies than those selected for camouflage treatment. Surgical treatment is associated with significant decompensation of the lower incisors but, ultimately, not the upper incisors. Class III patients treated with either camouflage or surgery treatment are likely to finish with slightly proclined upper incisors. Generally, surgical treatment results in greater skeletal change, involving normalisation of the skeletal base relationship, a reduction in chin prominence, fuller lips, and a more favourable lip and chin contour.

The Dance of Tusks: Rediscovery of Lower Incisors in the Pan-American Proboscidean Cuvieronius hyodon Revises Incisor Evolution in Elephantimorpha

PubMed Central

2016-01-01

The incisors of proboscideans (tusks and tushes) are one of the most important feature in conservation, ecology and evolutionary history of these mammals. Although the absence of upper incisors is rare in proboscideans (occurring only in deinotheres), the independent losses of lower incisors are recognized for most of its lineages (dibelodont condition). The presence of lower incisors in the Pan-American gomphothere Cuvieronius hyodon was reported a few times in literature, but it was neglected in systematic studies. We analyzed several specimens of Cuvieronius hyodon from the Americas and recognized that immature individuals had lower incisors during very early post-natal developmental stages. Subsequently, these are lost and lower incisors alveoli close during later developmental stages, before maturity. Moreover, for the first time in a formal cladistic analysis of non-amebelodontine trilophodont gomphotheres, Rhynchotherium and Cuvieronius were recovered as sister-taxa. Among several non-ambiguous synapomorphies, the presence of lower incisors diagnoses this clade. We recognize that the presence of lower incisors in Cuvieronius and Rhynchotherium is an unique case of taxic atavism among the Elephantimorpha, since these structures are lost at the origin of the ingroup. The rediscovery of the lower incisors in Cuvieronius hyodon, their ontogenetic interpretation and the inclusion of this feature in a revised phylogenetic analysis of trilophodont gomphotheres brought a better understanding for the evolutionary history of these proboscideans. PMID:26756209

The Dance of Tusks: Rediscovery of Lower Incisors in the Pan-American Proboscidean Cuvieronius hyodon Revises Incisor Evolution in Elephantimorpha.

PubMed

Mothé, Dimila; Ferretti, Marco P; Avilla, Leonardo S

2016-01-01

The incisors of proboscideans (tusks and tushes) are one of the most important feature in conservation, ecology and evolutionary history of these mammals. Although the absence of upper incisors is rare in proboscideans (occurring only in deinotheres), the independent losses of lower incisors are recognized for most of its lineages (dibelodont condition). The presence of lower incisors in the Pan-American gomphothere Cuvieronius hyodon was reported a few times in literature, but it was neglected in systematic studies. We analyzed several specimens of Cuvieronius hyodon from the Americas and recognized that immature individuals had lower incisors during very early post-natal developmental stages. Subsequently, these are lost and lower incisors alveoli close during later developmental stages, before maturity. Moreover, for the first time in a formal cladistic analysis of non-amebelodontine trilophodont gomphotheres, Rhynchotherium and Cuvieronius were recovered as sister-taxa. Among several non-ambiguous synapomorphies, the presence of lower incisors diagnoses this clade. We recognize that the presence of lower incisors in Cuvieronius and Rhynchotherium is an unique case of taxic atavism among the Elephantimorpha, since these structures are lost at the origin of the ingroup. The rediscovery of the lower incisors in Cuvieronius hyodon, their ontogenetic interpretation and the inclusion of this feature in a revised phylogenetic analysis of trilophodont gomphotheres brought a better understanding for the evolutionary history of these proboscideans.

Wildlife of southern forests habitat & management (Chapter 15): Rabbits

Treesearch

James G. Dickson

2003-01-01

Rabbits, or lagomorphs, resemble rodents. But unlike rodents they have relatively large hind legs, large ears, a short fluffy tail, and 2 sets of upper incisors. Like rodents their incisors grow continually. They can either walk or hop, and are fleet and elusive when evading predators. They normally are silent but are capable of several different vocalizations. Rabbits...

Orthodontic movement of a maxillary incisor through the midpalatal suture: a case report.

PubMed

Garib, Daniela Gamba; Janson, Guilherme; dos Santos, Patrícia Bittencourt Dutra; de Oliveira Baldo, Taiana; de Oliveira, Gabriela Ulian; Ishikiriama, Sérgio Kiyoshi

2012-03-01

Orthodontic space closure is a treatment alternative when a maxillary central incisor is missing. The objective of this report was to present an unusual treatment in which a right maxillary central incisor was moved through the midpalatal suture to replace the absent contralateral tooth. The biologic aspects and clinical appearance of the recontoured lateral and central incisors were analyzed. The position of the examined teeth and the appearance of the surrounding soft tissues were satisfactory; however, the upper midline frenulum deviated to the left. The incisor was successfully moved with no obvious detrimental effects as observed on the final radiographs. In the radiographic and tomographic examinations, the midline suture seemed to have followed the tooth movement. The patient expressed satisfaction with the results. It was concluded that orthodontic movement of the central incisor to replace a missing contralateral tooth is a valid treatment option, and the achievement of an esthetic result requires an interdisciplinary approach, including restorative dentistry and periodontics.

[Combined surgical-orthodontic therapy for compound odontoma].

PubMed

Dukić, Walter; Kuna, Tihomir; Lapter-Varga, Marina; Jurić, Hrvoje; Lulić-Dukić, Olga

2007-09-01

Odontogenic tumor is a rare condition in dental medicine that mostly proceeds unrecognized until the occurrence of clinical symptoms such as delayed eruption, or is incidentally detected on routine x-ray examination. The exact cause is not known, however, previous dental trauma and infection have been postulated as the potential factors in the development of odontogenic tumor. The earliest possible operative extirpation of the tumorous growth is recommended to eliminate permanent tooth impaction and to enable normal growth of the teeth. In some cases, corticotomy, including complete removal of the bony coat of the tooth, may be needed to additionally facilitate and precipitate its eruption. Orthodontic therapy is also of great importance in correct alignment of the teeth 'n the dental arch as well as in the management of other anomalies that may be associated with odontogenic tumor. A patient with compound odontoma is presented, along with the course of combined surgical-orthodontic therapy. The patient reported previous intrusion trauma that had occurred at the age of 4 years, which may have been the potential factor in the development of odontoma. In this case, there was a massive odontogenic tumor which had compromised the growth of permanent teeth, and the growth impulse was almost at the end since the patient was 11 years old and the apexes of the upper incisors were partially closed. The first operation included complete removal of the tumorous mass that had interrupted spontaneous eruption of the upper permanent incisors. It did not result in immediate spontaneous tooth eruption, so an additional operation was needed. The objective of the second operative procedure was complete removal of the covering bone over the unerupted upper permanent incisors in order to eliminate the physical barrier to tooth growth and eruption. The objective of fixed orthodontic therapy was full eruption of the partially erupted upper incisors. After 16 months, the upper incisors were regularly located in the dental arch. In this case, orthodontic therapy had another objective, i.e. to ensure rotation of the first upper premolar, to provide space for the upper permanent canine eruption and to establish regular intercuspidation after upper second premolar hypodontia. In colclusion, combined operative and orthodontic therapy can be recommended irrespective of the stage of the impacted tooth development because any treatment to precipitate tooth eruption has favorable effects. Impacted teeth should always be provided all treatment options for faster eruption, as demonstrated in our case where a good clinical result was achieved within 2.5 years. The role of regular clinical and x-ray controls for assessment of the impacted tooth eruption should also be emphasized.

A novel method for soft tissue retraction during periapical surgery using 3D technology: a case report.

PubMed

Patel, S; Aldowaisan, A; Dawood, A

2017-08-01

This case report describes a new approach to isolation and soft tissue retraction during endodontic surgery using cone-beam computed tomography (CBCT), computer-aided design (CAD) and three-dimensional (3D) printing. A 53-year-old patient presented for endodontic treatment of her maxillary left central incisor. It was decided to treat this tooth with a microsurgical approach. The data from the diagnostic CBCT scan were also used to make a physical model of the operative site, and CAD software was used to design a soft tissue retractor to be used during the patient's surgery. A custom retractor was then fabricated using a 3D printer. The custom-made retractor enhanced visualization and soft tissue handling during the patient's surgery. The patient was asymptomatic at a 1-year review. No abnormalities were detected during her clinical examination, and radiographic examination revealed complete healing of the surgical site. The significance of proper soft tissue retraction in periapical microsurgery is underemphasized. Geometric data from CBCT scans may be harvested for a variety of uses, adding value to the examination. 3D printing is a promising technology that may potentially have many uses in endodontic surgery. © 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.

The Occurrence Rate and Diameter of Arteries Traveling Near the Mandible and an Assessment of the Relative Hemorrhage Risk in Implant Surgery.

PubMed

Katsumi, Yuji; Takagi, Ritsuo; Ohshima, Hayato

2016-10-01

Bleeding in the floor of the mouth during implant surgery is attributed to arterial injuries in the sublingual space. This study aimed to assess the relative hemorrhage risk during implant surgery. We investigated the occurrence rate and diameter of submental and sublingual arteries with special reference to their relationship with the course patterns of these arteries using 26 human cadavers. Three types of arteries were distinguished: main duct (MD), mucoperiosteal branches (MB), and cortical branches (CB). The occurrence rate of MB and CB was significantly high at the central incisor region in the upper part of the mylohyoid muscle, whereas the diameter of the MB and CB was significantly smaller than the occurrence rate of MD at the incisor regions. The occurrence rate of MD in the submental artery was significantly higher at the lateral incisor, canine, and premolar regions in the lower parts, whereas the occurrence rate of MD was significantly lower at the second and third molars in the upper parts. The susceptibility of the submental artery to injury is suggested at the incisors, canine, premolars, and first molar regions during implant surgery. © 2015 Wiley Periodicals, Inc.

Anchorage condition during canine retraction using transpalatal arch with continuous and segmented arch mechanics.

PubMed

Alhadlaq, Adel; Alkhadra, Thamer; El-Bialy, Tarek

2016-05-01

To compare anchorage condition in cases in which transpalatal arch was used to enhance anchorage in both continuous and segmented arch techniques. Twenty cases that required first premolar extraction for orthodontic treatment and transpalatal arch to enhance anchorage were included in this study. Ten cases were treated using the continuous arch technique, while the other 10 cases were treated using 0.019 × 0.025-inch TMA T-loops with posterior anchorage bend according to the Burstone and Marcotte description. Lateral cephalometric analysis of before and after canine retraction was performed using Ricketts analysis to measure the anteroposterior position of the upper first molar to the vertical line from the Pt point. Data were analyzed using an independent sample t-test. There was a statistically significant forward movement of the upper first molar in cases treated by continuous arch mechanics (4.5 ± 3.0 mm) compared with segmented arch mechanics (-0.7 ± 1.4 mm; P  =  .01). The posterior anchorage bend to T-loop used to retract the maxillary canine can enhance anchorage during maxillary canine retraction.

Evaluation of piezocision and laser-assisted flapless corticotomy in the acceleration of canine retraction: a randomized controlled trial.

PubMed

Alfawal, Alaa M H; Hajeer, Mohammad Y; Ajaj, Mowaffak A; Hamadah, Omar; Brad, Bassel

2018-02-17

To evaluate the effectiveness of two minimally invasive surgical procedures in the acceleration of canine retraction: piezocision and laser-assisted flapless corticotomy (LAFC). Trial design: A single-centre randomized controlled trial with a compound design (two-arm parallel-group design and a split-mouth design for each arm). 36 Class II division I patients (12 males, 24 females; age range: 15 to 27 years) requiring first upper premolars extraction followed by canine retraction. piezocision group (PG; n = 18) and laser-assisted flapless corticotomy group (LG; n = 18). A split-mouth design was applied for each group where the flapless surgical intervention was randomly allocated to one side and the other side served as a control side. the rate of canine retraction (primary outcome), anchorage loss and canine rotation, which were assessed at 1, 2, 3 and 4 months following the onset of canine retraction. Also the duration of canine retraction was recorded. Random sequence: Computer-generated random numbers. Allocation concealment: sequentially numbered, opaque, sealed envelopes. Blinding: Single blinded (outcomes' assessor). Seventeen patients in each group were enrolled in the statistical analysis. The rate of canine retraction was significantly greater in the experimental side than in the control side in both groups by two-fold in the first month and 1.5-fold in the second month (p < 0.001). Also the overall canine retraction duration was significantly reduced in the experimental side as compared with control side in both groups about 25% (p ≤ 0.001). There were no significant differences between the experimental and the control sides regarding loss of anchorage and upper canine rotation in both groups (p > 0.05). There were no significant differences between the two flapless techniques regarding the studied variables during all evaluation times (p > 0.05). Piezocision and laser-assisted flapless corticotomy appeared to be effective treatment methods for accelerating canine retraction without any significant untoward effect on anchorage or canine rotation during rapid retraction. ClinicalTrials.gov (Identifier: NCT02606331 ).

Perception of smile esthetics by laypeople of different ages.

PubMed

Sriphadungporn, Chompunuch; Chamnannidiadha, Niramol

2017-12-01

Age is a factor affecting smile esthetics. Three variables of smile esthetics associated with the maxillary anterior teeth and age-related changes have recently received considerable attention: (i) the incisal edge position of the maxillary central incisors, (ii) the maxillary gingival display, and (iii) the presence of a black triangle between the maxillary central incisors. The aim of this study was to evaluate the influence of age on smile esthetic perception based on these three variables in a group of Thai laypeople. The smiles were constructed from a photograph of a female smile. Smile photographs were altered in various increments using three variables: the incisal edge position of the maxillary incisors, gingival display, and a black triangle between the maxillary central incisors. The photographs were shown to a group of 240 Thai laypeople. The subjects were divided into two groups: a younger group, 15-29 years old (n = 120) and an older group, 36-52 years old (n = 120). Each subject was asked to score the attractiveness of each smile separately using a visual analog scale. Smile attractiveness scores concerning the incisal edge positions of the maxillary central incisors were similar between the two groups. However, upper lip coverage was rated as unattractive by the younger group. A gingival display of 0 and 2 mm was rated as most attractive by the younger group. Upper lip coverage and gingival display of 0 and 2 mm were considered attractive by the older group. Excessive gingival display (6 mm) was scored as unattractive by both groups. A black triangle ranging from 1 to 2.5 mm between the maxillary central incisors was scored differently between the two groups. The older group was more tolerant of the black triangle size. Age impacts smile perception based on maxillary gingival display and the presence of a black triangle between the maxillary central incisors, but not of the incisal edge position of the maxillary central incisors. Due to the variation in esthetic perception of each individual, participation between orthodontists and patients for decision-making and treatment planning is a crucial process to provide successful results.

[Therapeutic evaluation of the correction of the severe bi-maxillary protrusion cases by Tweed-Merrifield technique].

PubMed

Huang, J Q; Liu, S Y; Jiang, J H

2016-06-18

To evaluate the influence of Tweed-Merrifield technique in correction of severe bimaxillary protrusion adult patients on the measurement of the dental and skeletal changes after orthodontic treatment by Johnston analysis and the regular cephalomatric analysis. Twelve adolescent patients with severe bimaxillary protrusion were included in this self-control retrospective study. Lateral cephalometric radiographs were taken before and after treatments. All the radiographs were traced and analyzed by the method of Johnston analysis. Other measurements were evaluated using a series of 13 linear and angular measurements including SNA, SNB, ANB, U1-SN, U1-NA, U1/NA, L1-NB, U1/NB, L1/MP, U1-L1, (U1+L1)/2-AB, MP/SN and MP/FH from regular cephalomatric analysis. These measurements were also applied to compare the differences between pre- and post-treatments, which clarify the dental and skeletal changes by Johnston analysis. The effect of orthodontic correction was determined using the non-parameters test. The maxillary moved backforward by 1.3 mm according to the stable skull base, while the mandible moved forward by 2.12 mm. The relative position between the maxillary and mandible (ABCH) changed 3.42 mm. The upper and lower incisors retracted significantly. The upper and lower molars moved slightly forward and the relative positions of upper and lower molars and anterior teeth after treatment were 3.44 mm and 4.23 mm respectively. After treatment, the parameters of ANB, U1-NA, U1/NA, U1-SN, L1-NB, L1/NB and L1-M were reduced by -(1.98±1.55)°(P=0.012), - (5.08±4.6) mm (P=0.002), -(11.79±1.21)°(P=0.004), -(13.55±6.32)°(P=0.047), -(3.17±3.07) mm (P=0.010), -(6.84±2.55)°(P=0.038) and -(4.13±2.24)°(P=0.048) on average, whose changes had the statistically significant effects. Tweed-Merrifield technique (directional force technique) can stabilize anchorage molar, retract anterior teeth and significantly improve the hard and soft tissue profile for patients with bimaxillary protrusion, and make a good vertical control which means this technique is applicable to the patients who need strong anchorage. Even for the severe bimaxillary protrusion adult patients, the Tweed-Merrifield technique can control the anchoragewell and make the profiles improved greatly.

[Three-dimensional finite element analysis of the upper cervical-defected incisor with labial access or lingual access].

PubMed

Su, Fan; Zhao, Ying; Su, Qin

2013-08-01

To evaluate the stress distribution of the cervical-defected incisor with labial or lingual endodontic access with finite element analysis (FEA), and to explore the advantage of resistance in labial endodontic access. 3-D finite element models of upper cervical-defected incisor were established using cone-beam CT (CBCT), Mimics Catia, and Ansys software. The subjects were categorized according to the two endodontic accesses and three restorative ways, which were composite resin, glass fiber-reinforced composite resin and glass fiber-reinforced post-crown. All the models were loaded.The von Mises stress values and distribution were recorded and analyzed with Ansys 10.0 software. In this study, direct composite resin restoration showed no significant difference between the labial and lingual access. In glass fiber-reinforced composite resin, labial access could transfer the stress concentration area. It could reduce the incidence of fracture of the cervical lesion but increase the incidence of root fracture. Post-crown restoration could obviously reduce the incidence of fracture of the cervical lesion. When the cervical-defected incisor is restored with composite resin, labial and lingual accesses can be considered. Labial access with glass fiber-reinforced composite resin or post-crown restoration is a good choice.

Enhanced BMP signaling results in supernumerary tooth formation in USAG-1 deficient mouse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murashima-Suginami, Akiko; Takahashi, Katsu; Sakata, Tomoko

2008-05-16

Uterine sensitization associated gene-1 (USAG-1) is a BMP antagonist, and also modulates Wnt signaling. We previously reported that USAG-1 deficient mice have supernumerary teeth. The supernumerary maxillary incisor appears to form as a result of the successive development of the rudimentary upper incisor. USAG-1 abrogation rescued apoptotic elimination of odontogenic mesenchymal cells. We confirmed that BMPs were expressed in both the epithelium and mesenchyme of the rudimentary incisor at E14 and E15. BMP signaling in the rudimentary maxillary incisor, assessed by expressions of Msx1 and Dlx2 and the phosphorylation of Smad protein, was significantly enhanced. Wnt signaling as demonstrated bymore » the nuclear localization of {beta}-catenin was also up-regulated. Inhibition of BMP signaling rescues supernumerary tooth formation in E15 incisor explant culture. Based upon these results, we conclude that enhanced BMP signaling results in supernumerary teeth and BMP signaling was modulated by Wnt signaling in the USAG-1 deficient mouse model.« less

Resorption of maxillary incisors after orthodontic treatment--clinical study of risk factors.

PubMed

Elhaddaoui, Rajae; Benyahia, Hicham; Azeroual, Mohamed-Faouzi; Zaoui, Fatima; Razine, Rachid; Bahije, Loubna

2016-03-01

External apical root resorption (EARR) is one of the major problems associated with orthodontic treatment. Such lesions represent an iatrogenic risk that must be detected as early as possible, with regular radiological follow-up and appropriate therapeutic precautions. The causes and mechanisms leading to susceptibility to root resorption following the application of an orthodontic force are often not clear and are generally said to be of multifactorial origin. The aim of this clinical study was to analyze the factors linked to the occurrence of moderate to severe resorption (MSR) of upper incisors during orthodontic treatment in a group of Moroccan patients treated in the Dento-Facial Orthopedic Department of the Dental Consultation and Treatment Center (Centre de consultation et de traitements dentaires [CCTD]) in Rabat. A total of 82 patients (28% males, 72% females) aged between 12 and 27, with various malocclusions, who had been treated with fixed appliances for at least 1 year and for whom panoramic X-rays at the start, during and at the end of treatment were available, were selected randomly. The reduction in maxillary incisor root length was evaluated using resorption scores. The factors studied in relation to the risk of occurrence of MSR were: age, sex, treatment duration, extraction or non-extraction, type of malocclusion (Class I arch-length discrepancy, Class II, Class III), the vertical diagnosis (normal, supraocclusion, open bite), presence of dysfunction, impacted canines and root morphology. Statistical analysis was performed using SPSS software, version 18.0. Statistical tests used were: Kaplan-Meier analysis and the univariate and multivariate Cox models for the study of factors associated with MSR. The threshold of significance adopted was 0.05. The factors that were significantly associated with the occurrence of MSR at the level of the upper incisors were: tooth type, with a greater risk for the lateral incisor (HR=3.2 95% CI [2.3-4.5] P<0.001), treatments with extraction (HR=1.64 95% CI [1.16-2.33] P<0.05), the presence of supraocclusion (HR=2.17 95% CI [1.33-3.53] P<0.05) or open bite (HR=3.12 95% CI [1.66-5.86] P<0.001) and root malformation (HR=1.5 95% CI [1.09-2.07] P<0.05). Age, sex, type of malocclusion, dysfunction and impaction of canines were not associated at a statistically significant level with the risk of occurrence of MSR of the upper incisors. EARR is difficult to avoid; the orthodontist's role remains crucial in identifying risk factors so as to adopt a treatment strategy taking these factors into account. In our population, the risk of MSR in the upper incisors appeared to increase in treatments with extraction, situations of supraocclusion or open bite, and in the presence of root abnormalities. Finally, clinical recommendations for the prevention of the occurrence of MSR of the maxillary incisors are proposed, taking into account all the risk factors identified. Copyright © 2015 CEO. Published by Elsevier Masson SAS. All rights reserved.

Two-Step Extraction of the Lower First Molar for Class III Treatment in Adult Patient.

PubMed

Almeida, Kélei Cristina de Mathias; Paulin, Ricardo Fabris; Raveli, Taísa Barnabé; Raveli, Dirceu Barnabé; Santos-Pinto, Ary

2016-01-01

The aim of this article is to describe a case report of Class III malocclusion treatment with lower first molar extraction. The 27-year-old Caucasian male patient presented a symmetric face with a straight profile, hyperdivergent growth pattern, molar and cuspid Class III relation, and an anterior crossbite as well as a mild crowding on cuspids area, in both upper and lower arches and a tendency to posterior crossbite. The treatment was performed by the use of Haas expansion appliance followed by an initial alignment and leveling of the upper and lower arches with a fixed edgewise appliance, extraction of lower teeth aiming the correction of the incisors proclination and end the treatment with a Class I molar relationship. It resulted in a significant change in the patient's profile, dentoalveolar Class III correction, upper arch expansion, leveling and alignment of the upper and lower arches, and improvement of tipping of the upper and lowers incisors. In cases of a dentoalveolar compensation in well positioned bone bases the treatment with fixed appliances is an alternative and extraction of lower teeth is considered.

[Developmental radicular groove as a cause of endodontic failure].

PubMed

Fabra Campos, H; Millet Part, J

1989-01-01

A clinical case of apical injury on an upper lateral incisor with endodontical and surgical failures in its treatment is presented. Extraction of the incisor and its study at the stereoscopic microscope showed the existence of a developmental groove running from the cingulum to the end of the root, establishing a communication between the crevice and the apical part of the tooth. Bacterial infection through the groove could provide an explanation for treatment failure.

Upper lip changes and gingival exposure on smiling: vertical dimension analysis.

PubMed

Miron, Hagai; Calderon, Shlomo; Allon, Dror

2012-01-01

Our objectives were to evaluate and quantify upper lip soft-tissue changes in the vertical dimensions both at rest and at maximum smile, and to examine the correlation between upper labial vestibular attachment height and maxillary gingival exposure on smiling. Seventy-two volunteers (36 men, 36 women) aged 20 to 40 (mean, 30.49 years) were recruited for this study. For each subject, 9 measurements of upper lip position and maxillary incisor crown height at rest and in maximum smile were recorded. A statistically significant sexual dimorphism was apparent in most of the measured variables. Relaxed external upper lip length was 3.1 mm shorter in the women than in the men. The mean maxillary central incisor display at rest was 1.78 mm greater in the women than in the men. A high smile line was 2.5 times more prevalent in the women. The upper lip was shortened by 30% in subjects with a high smile line compared with 23% in subjects with a low smile line. The following findings were observed in subjects with a high smile pattern: (1) short upper lip length, (2) low smiling/resting upper lip length ratio, (3) inferior attachment of the upper labial vestibule, and (4) prominent upper lip vermilion. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Evaluation of the mineralization degree of the vestibular surface of the upper central incisors with a 655-nm diode laser in mouth breathers: preliminary results

NASA Astrophysics Data System (ADS)

Pinheiro Ladalardo, Thereza C. C. G.; Cappellette, Mario, Jr.; Zanin, Fatima A. A.; Brugnera, Aldo, Jr.; Anthero de Azevedo, Ramiro; Pignatari, Shirley; Weckx, Luc L. M.

2003-06-01

Mouth breathing unbalances the physiological mechanisms of the dental surface hydration by compromising lip closure, and, very often, causing the vestibular positioning of upper incisors. That variance leads to the interruption of the dental demineralization and remineralization feedback, prevailing a demineralized condition of the dental surface which increases caries risk. The laser fluorescence examination allows an early demineralization diagnosis, thus it makes possible through preventive measures to minimize the risk factor - dental mineral structure loss - in the bacterial infection of the demineralized area, and hence, preventing invasive therapeutical procedures. A DIAGNOdent apparatus was used to evaluate the mineralization degree of the upper central incisors in 40 patients - twenty of them with a mouth breathing diagnosis; the remaining twenty were nasal breathers (control group). Age ranging from 6 to 12 years, both male and female. To measure the vestibular surface of the incisors, it was divided into 3 segments: cervical, medial and incisal. The average of the results pertaining to the mouth breathing patients was as follows: tooth 11 cervical third - 5.45, medial third - 7.15, incisal third - 7.95, and tooth 21 - cervical third - 5.95, medial third - 7.25, incisal third - 8.15. The control patients, nasal breathers, presented the following results: tooth 11 cervical third - 1.75, medial third - 2.30, incisal third - 1.85, and tooth 21 - cervical third - 1.80, medial third - 2.20, incisal third - 2.15. The mouth breathing patients showed demineralization in the teeth examined at the initial stage, subclinical, comparing with the control patients, nasal breathers, who did not present any mineral deficit in these teeth.

Quantitative detection of Streptococcus mutans in the dental plaque of Japanese preschool children by real-time PCR.

PubMed

Hata, S; Hata, H; Miyasawa-Hori, H; Kudo, A; Mayanagi, H

2006-02-01

To detect quantitatively the total bacteria and Streptococcus mutans in dental plaque by real-time PCR with prbac, Sm and GTF-B primers, and to compare their presence with the prevalence of dental caries in Japanese preschool children. Human dental plaque samples were collected from the labial surfaces of the upper primary central incisors of 107 children. The dental status was recorded as dft by WHO caries diagnostic criteria. Positive dt and dft scores by the Sm or GTF-B primer were significantly higher than negative scores (P < 0.01). The proportions of Strep. mutans to the total bacteria from sound, and sound and/or filled upper primary incisors were significantly lower than those from decayed or filled, and decayed incisors, respectively (P < 0.01). The ratios of Strep. mutans to total bacteria in plaque detected by real-time PCR with Sm and GTF-B primers were closely associated with the prevalence of dental caries in Japanese preschool children. These assays may be useful for the assessment of an individual's risk of dental caries.

Alternative method for predicting optimal insertion depth of the laryngeal tube in children.

PubMed

Kim, J T; Jeon, S Y; Kim, C S; Kim, S D; Kim, H S

2007-11-01

Little information is available about the accuracy of the teeth mark on the laryngeal tube (LT) as a guide to correct placement in children. The aim of this crossover study was to evaluate three methods for optimal insertion depth of the size (#) 2 tube in children weighing 12-25 kg. In 24 children, the LT #2 was consecutively inserted by three different methods: (A) until the thick teeth mark on the tube was aligned with the upper incisors, (B) until resistance was felt, and (C) by inserting to a depth, previously measured, of the curved distance between the cricoid cartilage and the upper incisor. In each case, the depth of insertion, the degree of effective ventilation, the presence of leakage, and the fibreoptic view were assessed. Insertion based on the teeth mark led to a shorter insertion depth and a greater incidence of inadequate ventilation compared with the other two methods. There was no difference in the adequacy of ventilation between methods B and C. The vocal cords were more easily identified with methods B (62.5%) and C (75%) than with method A (12.5%). Insertion of the LT #2 aligned with the teeth mark can result in a shallow insertion depth and inadequate ventilation. The measured distance from the cricoid cartilage to the upper incisor offers alternative guidance for correct LT insertion.

Pin-Retraction Mechanism On Quick-Release Cover

NASA Technical Reports Server (NTRS)

Macmartin, Malcolm

1994-01-01

Quick-release cover includes pin-retraction mechanism releasing cover quickly from lower of two sets of pin connections holding cover. Cover released at top by pulling lever as described in "Lever-Arm Pin Puller" (NPO-18788). Removal of cover begins when technician or robot pulls upper-pin-release lever. Cover swings downward until tabs on lower pins are pulled through slots in their receptacles. Lower pins are then free.

Three-dimensional anatomy of equine incisors: tooth length, enamel cover and age related changes

PubMed Central

2013-01-01

Background Equine incisors are subjected to continuous occlusal wear causing multiple, age related changes of the extragingival crown. It is assumed that the occlusal wear is compensated by continued tooth elongation at the apical ends of the teeth. In this study, μCT-datasets offered the opportunity to analyze the three-dimensional appearance of the extra- and intraalveolar parts of the enamel containing dental crown as well as of the enamel-free dental root. Multiple morphometric measurements elucidated age related, morphological changes within the intraalveolar part of the incisors. Results Equine incisors possess a unique enamel cover displaying large indentations on the mesial and distal sides. After eruption tooth elongation at the apical end outbalances occlusal wear for two to four years resulting in increasing incisor length in this period of time. Remarkably, this maximum length is maintained for about ten years, up to a tooth age of 13 to 15 years post eruption. Variances in the total length of individual teeth are related to different Triadan positions (central-, middle- and corner incisors) as well as to the upper and lower arcades. Conclusion Equine incisors are able to fully compensate occlusal wear for a limited period of time. However, after this ability ceases, it is expected that a diminished intraalveolar tooth length will cause massive changes in periodontal biomechanics. The time point of these morphodynamic and biomechanical changes (13 to 15 years post eruption) occurs in coincidence with the onset of a recently described destructive disease of equine incisor (equine odontoclastic tooth resorption and hypercementosis) in aged horses. However, further biomechanical, cell biological and microbiological investigations are needed to elucidate a correlation between age related changes of incisor morphology and this disease. PMID:24321365

Three-dimensional anatomy of equine incisors: tooth length, enamel cover and age related changes.

PubMed

Schrock, Patricia; Lüpke, Matthias; Seifert, Hermann; Staszyk, Carsten

2013-12-09

Equine incisors are subjected to continuous occlusal wear causing multiple, age related changes of the extragingival crown. It is assumed that the occlusal wear is compensated by continued tooth elongation at the apical ends of the teeth. In this study, μCT-datasets offered the opportunity to analyze the three-dimensional appearance of the extra- and intraalveolar parts of the enamel containing dental crown as well as of the enamel-free dental root. Multiple morphometric measurements elucidated age related, morphological changes within the intraalveolar part of the incisors. Equine incisors possess a unique enamel cover displaying large indentations on the mesial and distal sides. After eruption tooth elongation at the apical end outbalances occlusal wear for two to four years resulting in increasing incisor length in this period of time. Remarkably, this maximum length is maintained for about ten years, up to a tooth age of 13 to 15 years post eruption. Variances in the total length of individual teeth are related to different Triadan positions (central-, middle- and corner incisors) as well as to the upper and lower arcades. Equine incisors are able to fully compensate occlusal wear for a limited period of time. However, after this ability ceases, it is expected that a diminished intraalveolar tooth length will cause massive changes in periodontal biomechanics. The time point of these morphodynamic and biomechanical changes (13 to 15 years post eruption) occurs in coincidence with the onset of a recently described destructive disease of equine incisor (equine odontoclastic tooth resorption and hypercementosis) in aged horses. However, further biomechanical, cell biological and microbiological investigations are needed to elucidate a correlation between age related changes of incisor morphology and this disease.

Quantitative digital subtraction radiography in the assessment of external apical root resorption induced by orthodontic therapy: a retrospective study.

PubMed

Sunku, Raghavendra; Roopesh, R; Kancherla, Pavan; Perumalla, Kiran Kumar; Yudhistar, Palla Venkata; Reddy, V Sridhar

2011-11-01

The objective of this study was to evaluate density changes around the apices of teeth during orthodontic treatment by using digital subtraction radiography to measure the densities around six teeth (maxilla central incisors, lateral incisors, and canines) before and after orthodontic treatment in 36 patients and also assess treatment variables and their coorelation with root resorption. A total of 36 consecutive patient files were selected initially. The selected patients presented with a class I or II relationship and were treated with or without premolar extractions and fixed appliances. Some class II patients were treated additionally with extraoral forces or functional appliances. External apical root resorption (EARR) per tooth in millimeters was calculated and was also expressed as a percentage of the original root length. Image reconstruction and subtraction were performed using the software Regeemy Image Registration and Mosaicing (version 0.2.43-RCB, DPI-INPE, Sao Jose dos Campos, Sao Paulo, Brazil) by a single operator. A region of interest (ROI) was defined in the apical third of the root and density calibration was made in Image J® using enamel (gray value = 255) as reference in the same image. The mean gray values in the ROIs were reflective of the change in the density values between the two images. The root resorption of the tooth and the factors of malocclusion were analyzed with a one-way ANOVA. An independent t-test was performed to compare the mean amount of resorption between male and female, between extraction and nonextraction cases. The density changes after orthodontic treatment were analyzed using the Wilcoxon signedrank test. In addition, the density changes in different teeth were analyzed using the Kruskal-Wallis test. The cut-off for statistical significance was a p-value of 0.05. All the statistical analyses were carried out using SPSS (version 13.0 for Windows, Chicago, IL, USA). Gender, the age at which treatment was started and Angle's classification was not statistically related with observed root resorption. The mean percentage density reduction as assessed by DSR was greatest in both central incisor: by 27.2 and 25.2% in the upper-right and upper-left central incisors, respectively, followed by the upper-right and upper-left canine teeth (23.5 and 21.0%) and then the upper-right and upper-left lateral incisors (19.1 and 17.4%). Tooth extraction prior to treatment initiation and the duration of orthodontic treatment was positively correlated with the amount of root resorption. DSR is useful for evaluating density changes around teeth during orthodontic treatment. The density around the apices of teeth reduced significantly after the application of orthodontic forces during treatment. Assessment of density changes on treatment radiographs of patients undergoing orthodontic therapy may help in the monitoring of external apical root resorption during course of treatment.

Spectral analysis of /s/ sound with changing angulation of the maxillary central incisors.

PubMed

Runte, Christoph; Tawana, Djafar; Dirksen, Dieter; Runte, Bettina; Lamprecht-Dinnesen, Antoinette; Bollmann, Friedhelm; Seifert, Eberhard; Danesh, Gholamreza

2002-01-01

The aim of the study was to measure the influence of the maxillary central incisors free from adaptation phenomena using spectral analysis. The maxillary dentures of 18 subjects were duplicated. The central incisors were fixed in a pivoting appliance so that their position could be changed from labial to palatal direction. A mechanical push/pull cable enabled the incisor section to be handled extraorally. Connected to the control was a sound generator producing a sinus wave whose frequency was related to the central incisor angulation. This acoustic signal was recorded on one channel of a digital tape recorder. After calibration of the unit, the denture duplicate was inserted into the subject's mouth, and the signal of the /s/ sounds subsequently produced by the subject was recorded on the second channel during alteration of the inclination angle simultaneously with the generator signal. Spectral analysis was performed using a Kay Speech-Lab 4300B. Labial displacement in particular produced significant changes in spectral characteristics, with the lower boundary frequency of the /s/ sound being raised and the upper boundary frequency being reduced. Maxillary incisor position influences /s/ sound production. Displacement of the maxillary incisors must be considered a cause of immediate changes in /s/ sound distortion. Therefore, denture teeth should be placed in the original tooth position as accurately as possible. Our results also indicate that neuromuscular reactions are more important for initial speech sound distortions than are aerodynamic changes in the anterior speech sound-producing areas.

Orthodontic camouflage versus orthognathic surgery for class III deformity: comparative cephalometric analysis.

PubMed

Martinez, P; Bellot-Arcís, C; Llamas, J M; Cibrian, R; Gandia, J L; Paredes-Gallardo, V

2017-04-01

The objective of this study was to compare different cephalometric variables in adult patients with class III malocclusions before and after treatment, in order to determine which variables are indicative of orthodontic camouflage or orthognathic surgery. The cases of 156 adult patients were assessed: 77 treated with orthodontic camouflage and 79 treated with orthodontics and orthognathic surgery. The following cephalometric variables were measured on pre-treatment (T1) and post-treatment (T2) lateral cephalograms: sella-nasion-A-point (SNA), sella-nasion-B-point (SNB), and A-point-nasion-B-point (ANB) angles, Wits appraisal, facial axis angle, mandibular plane angle, upper and lower incisor inclination, and inter-incisal angle. There were statistically significant differences in cephalometric variables before and after treatment between the two groups. The percentage of normal pre-treatment measurements in the camouflage orthodontics group was 30.7%, which worsened slightly to 28.4% post-treatment. However in the group receiving surgery, this was 24.5% pre-treatment, improving to 33.5% after surgery. SNA, SNB, Wits appraisal, lower incisor inclination, and inter-incisal angle showed differences between the two groups before and after treatment. Wits appraisal, lower incisor inclination, and inter-incisal angle were indicative of one or other treatment. Upper and lower incisor decompensation in both groups did not reach ideal values, which impeded complete skeletal correction in 52% of surgical cases. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Providing a harmonious smile with laminate veneers for a patient with peg-shaped lateral incisors

PubMed Central

Alberton, Simone Beatriz; Alberton, Victória; de Carvalho, Rodrigo Varella

2017-01-01

The most common discrepancy concerning tooth size is the presence of peg-shaped lateral incisors, which can cause teeth with reduced size, anterior diastema, and consequently an unpleasant smile. The development of the adhesive dentistry and ceramic veneers allowed all ceramic-bonded restorations to become an esthetic and functional approach to reestablish the smile harmony. The purpose of this clinical report is to describe a conservative treatment approach to recover an esthetic disharmony caused by bilateral peg-shaped lateral incisors. A 30-year-old female patient was seeking treatment to solve an esthetic disharmony of her smile. Lithium disilicate veneers were planned and build-up with the help of diagnostic models, wax-up, mock-up, and silicone guides, to restore the morphology, size, function, and esthetic of upper lateral incisors and smile. The lithium disilicate veneers were able to provide the harmonization of the patient's smile, recovering the teeth size, shape, and anatomic characteristics. PMID:29279628

Providing a harmonious smile with laminate veneers for a patient with peg-shaped lateral incisors.

PubMed

Alberton, Simone Beatriz; Alberton, Victória; de Carvalho, Rodrigo Varella

2017-01-01

The most common discrepancy concerning tooth size is the presence of peg-shaped lateral incisors, which can cause teeth with reduced size, anterior diastema, and consequently an unpleasant smile. The development of the adhesive dentistry and ceramic veneers allowed all ceramic-bonded restorations to become an esthetic and functional approach to reestablish the smile harmony. The purpose of this clinical report is to describe a conservative treatment approach to recover an esthetic disharmony caused by bilateral peg-shaped lateral incisors. A 30-year-old female patient was seeking treatment to solve an esthetic disharmony of her smile. Lithium disilicate veneers were planned and build-up with the help of diagnostic models, wax-up, mock-up, and silicone guides, to restore the morphology, size, function, and esthetic of upper lateral incisors and smile. The lithium disilicate veneers were able to provide the harmonization of the patient's smile, recovering the teeth size, shape, and anatomic characteristics.

Surgical management of impacted incisors in associate with supernumerary teeth: a combine case report of spontaneous eruption and orthodontic extrusion.

PubMed

Das, D; Misra, J

2012-01-01

Maxillary permanent incisors impaction is not a frequent case in dental practice, but its treatment is challenging because of its importance to facial esthetics. Supernumerary teeth are the main cause of impaction of upper incisors. Supernumerary teeth when present can cause both esthetic and pathologic problems. Early detection of such teeth is most important if complications are to be avoided. In this reported case, the orthopantamogram of a 9-year-old boy revealed two impacted supernumerary teeth in the maxillary anterior region, which was interfering with the eruption of the permanent central incisors. The impacted supernumerary teeth were surgically removed, 11 was repositioned in the arch as it was situated very high in the arch, close to the nasal floor. Twenty-one erupted spontaneously but orthodontic force was applied over 11 to bring it into the occlusion and alignment was achieved with 0.014 mm NiTi wire.

[Three-dimensional analysis of the early correction of anterior crossbite using eruption guidance appliance].

PubMed

Wang, X; Zhang, J J; Yuan, F S; Wang, Y; Li, C H; Varrela, J E; Yue, J; Ge, L H

2018-06-18

To investigate the clinical effect of eruption guidance appliance in the treatment of anterior cross bite in mixed-dentition children. In the study,10 mixed-dentition children with anterior cross bite, totally 12 incisors, were selected. Alginate was used to take upper and lower dentition impression and make a hard plaster model,which served as the eruption guidance appliance for treatment. The pre- and post-operative dental casts were digitized with SmartOptics Activity 880 scanner,and the three-dimensional overlapping models were obtained by reverse engineering software,Geomagic Studio 2012,then the three-dimensional movements of the upper and lower incisors were analyzed using Imageware 13.2 software. The overbite and overjet were analyzed using the same methods. Measurement with copper wire was used to analyze the upper and lower arch length. Space analysis was the result by the sum of crown width minus the arch length. The crown width of unerupted permanent teeth was according to X-ray method to predict. The SPSS 17.0 software was used to analyze the pre- and post-operative measurements of the same child. The normality test of the measured data showed that it conformed to the normal distribution. Therefore,the t test and double side test were used,and the significance level was 0.05. The course of treatment was (5.6±2.7) months. During orthodontic treatment, the upper incisors moved mainly labially (P<0.001) in three-dimensional displacement, and the lower incisors moved mainly the same direction (P=0.025). During the treatment of eruption guidance appliance,the average overbite decreased (1.01±0.9) mm (t=-3.531, P=0.006), and the difference was statistically significant. There was no statistically significant difference between the pre- and post-operative average overjet (t=0.771, P=0.460). The severity of crowding in upper arch decreased (1.9±0.99) mm (t=-6.042, P<0.001),and that in lower arch decreased (1.9±0.74) mm (t=-8.143, P<0.001), both of the differences were statistically significant. The anterior cross bite in mixed dentition could be corrected by eruption guidance appliance, and at the same time, the normal overjet and overbite were established, and the teeth were aligned.

Relationship between dental erosion and respiratory symptoms in patients with gastro-oesophageal reflux disease.

PubMed

Wang, Geng-Ru; Zhang, Hui; Wang, Zhong-Gao; Jiang, Guang-Shui; Guo, Cheng-Hao

2010-11-01

Both dental erosion and respiratory symptoms are extra-oesophageal manifestations of gastro-oesophageal reflux disease (GERD). The aim of this study was to determine whether dental erosion was correlated with respiratory symptoms in GERD patients. 88 GERD patients were recruited and assigned to three groups mainly according to the frequency of respiratory symptoms: Group I: never; Group II: occasional (1-2 days a week or less); Group III: frequent (3-5 days a week or more). All patients underwent medical evaluations, including medical history, questionnaire answering and alimentary tract examinations. Dental examinations were carried out on these patients and 36 healthy controls. Dental erosions were measured by modified method of Smith and Knight Tooth Wear Index (TWI). Location and severity of dental erosion were recorded. The prevalence of dental erosion in Group III (64.52%) was higher (p<0.05) than that in Groups I (36.67%) and II (44.44%). GERD patients were presented with dental erosion with TWI scores ranging from 1 to 4. Though proportion of dental erosion with Score 2 (7/20) in Group III was higher than that in Group I (2/11) and Group II (3/12), there was no statistical significance in the proportions of erosion scores among three patient groups. Correlation coefficient between airway symptoms and scores of dental erosion was 0.231 (p<0.05). Palatal erosion of upper incisor was seen in 8 persons (72.7%) in Group I, 9 persons (75%) in Group II and 16 persons (80%) in Group III (p>0.05). Labial erosion of upper incisors was found in 1 person in Groups I and II respectively and 4 persons in Group III. All patients with labial erosion on upper incisors had palatal erosion, except 1 patient in Group III. In GERD patients, dental erosions are more prevalent in patients with frequent respiratory symptoms than those in patients with occasional and without respiratory symptoms. Palatal erosion of upper incisor is the main manifestation in patients. Acid reflux is the main causative factor of dental erosion in GERD patients with airway symptoms. Copyright © 2010 Elsevier Ltd. All rights reserved.

Interdisciplinary treatment of an adult with a unilateral cleft lip and palate

PubMed Central

Al-Ruwaithi, Moatazbellah M; Al-Fraidi, Ahmad A; Al-Tamimi, Tawfiq S; Al-Shehri, Ali S

2014-01-01

The management of cleft lip and palate (CLP) requires an interdisciplinary team providing comprehensive care. The present report presents an interdisciplinary approach for the care of a cleft patient. A 17-year-old male patient presented with a a chief complaint of “unpleasant appearance of my teeth” and a history of surgical repair of unilateral CLP on the left side. He presented with Class III molar relationships, Class II canine relationships, crossbite related to maxillary right first premolar and lateral incisor, severe maxillary and mandibular crowding, maxillary anterior tooth size deficiency, congenitally missing upper left lateral incisor. Patient was treated with a pre-adjusted edgewise appliance in conjunction with extraction of multiple teeth and distalization of the lower right first molar using a temporary anchorage device. In addition, alveolar bone graft and implant were placed to restore the missing upper left lateral incisor and a final esthetic work was performed for anterior teeth. The case was finished with Class I molar and canine relationships, minimal overjet and overbite. Total treatment time was about 31 months with satisfactory results. Post-treatment evaluation after 8 months showed stable results. PMID:24987659

Upper Airway Changes after Orthodontic Extraction Treatment in Adults: A Preliminary Study using Cone Beam Computed Tomography

PubMed Central

Zhang, Jingjing; Chen, Gui; Li, Weiran; Xu, Tianmin; Gao, Xuemei

2015-01-01

Objective Whether the orthodontic treatment with premolar extraction and maximum anchorage in adults will lead to a narrowed upper airway remains under debated. The study aims to investigate the airway changes after orthodontic extraction treatment in adult patients with Class II and hyperdivergent skeletal malocclusion. Materials and Methods This retrospective study enrolled 18 adults with Class II and hyperdivergent skeletal malocclusion (5 males and 13 females, 24.1 ± 3.8 years of age, BMI 20.33 ± 1.77 kg/m2). And 18 untreated controls were matched 1:1 with the treated patients for age, sex, BMI, and skeletal pattern. CBCT images before and after treatment were obtained. DOLPHIN 11.7 software was used to reconstruct and measure the airway size, hyoid position, and craniofacial structures. Changes in the airway and craniofacial parameters from pre to post treatment were assessed by Wilcoxon signed rank test. Mann-Whitney U test was used in comparisons of the airway parameters between the treated patients and the untreated controls. Significant level was set at 0.05. Results The upper and lower incisors retracted 7.87 mm and 6.10 mm based on the measurement of U1-VRL and L1-VRL (P < 0.01), while the positions of the upper and lower molars (U6-VRL, and L6-VRL) remained stable. Volume, height, and cross-sectional area of the airway were not significantly changed after treatment, while the sagittal dimensions of SPP-SPPW, U-MPW, PAS, and V-LPW were significantly decreased (P < 0.05), and the morphology of the cross sections passing through SPP-SPPW, U-MPW, PAS, and V-LPW became anteroposteriorly compressed (P <0.001). No significant differences in the airway volume, height, and cross-sectional area were found between the treated patients and untreated controls. Conclusions The airway changes after orthodontic treatment with premolar extraction and maximum anchorage in adults are mainly morphological changes with anteroposterior dimension compressed in airway cross sections, rather than a decrease in size. PMID:26588714

Osseous outgrowth on the buccal maxilla associated with piezosurgery-assisted en-masse retraction: A case series.

PubMed

Tunçer, Nilüfer İrem; Arman-Özçırpıcı, Ayça; Oduncuoğlu, Bahar Füsun; Kantarcı, Alpdoğan

2018-01-01

Piezoelectric surgery is a novel surgical approach used in orthodontic treatment for rapid tooth movement. This paper presents a case series wherein osseous outgrowths were observed in response to piezosurgery-assisted en-masse retraction. Sixteen patients requiring upper premolar extractions were treated with miniscrew-supported en-masse retraction and received minimally invasive decortication via piezosurgery. Computed tomography (CT) of the maxillary anterior region was performed to investigate the nature of the outgrowths. In 8 of the 16 patients, hemispheric or disc-shaped osseous outgrowths were observed on the sites where piezosurgery was performed during retraction. CT images revealed that these outgrowths were alveolar bone. This case series presents a previously unreported osseous response to piezosurgery-assisted tooth movement during orthodontic treatment. The response is mostly transient and is observed in 50% of the treated patients, suggesting a bone turnover that can be assessed clinically and radiographically.

Osseous outgrowth on the buccal maxilla associated with piezosurgery-assisted en-masse retraction: A case series

PubMed Central

Arman-Özçırpıcı, Ayça; Oduncuoğlu, Bahar Füsun; Kantarcı, Alpdoğan

2018-01-01

Piezoelectric surgery is a novel surgical approach used in orthodontic treatment for rapid tooth movement. This paper presents a case series wherein osseous outgrowths were observed in response to piezosurgery-assisted en-masse retraction. Sixteen patients requiring upper premolar extractions were treated with miniscrew-supported en-masse retraction and received minimally invasive decortication via piezosurgery. Computed tomography (CT) of the maxillary anterior region was performed to investigate the nature of the outgrowths. In 8 of the 16 patients, hemispheric or disc-shaped osseous outgrowths were observed on the sites where piezosurgery was performed during retraction. CT images revealed that these outgrowths were alveolar bone. This case series presents a previously unreported osseous response to piezosurgery-assisted tooth movement during orthodontic treatment. The response is mostly transient and is observed in 50% of the treated patients, suggesting a bone turnover that can be assessed clinically and radiographically. PMID:29291189

Novel Trocarless, Scarless Technique for Left Lobe Liver Retraction in Laparoscopic Upper Gastrointestinal Surgeries: Simple, Cost-effective and with Better Cosmesis.

PubMed

Madnani, Manish A; Patel, Tejas J; Gupta, Alankar K; Mistry, Jitendra H; Soni, Harshad N; Shah, Atul J; Patel, Kantilal S; Haribhakti, Sanjiv P

2015-12-01

Surgeons always look for ways to reduce the size and number of ports in laparoscopy, where in today's era, we have single-incision laparoscopic surgery (SILS). While doing so, principal 'adequate exposure' should not be compromised. For upper gastrointestinal laparoscopic surgeries, we have adopted a novel technique for retraction of the left lobe of liver, which is described here. Device can be made both single sling and double sling, with help of an infant feeding tube and any routinely used suture material. Placement of device does not require any incision, special energy source, or instrument. It can help in SILS. Detailed technique is described in the text. Operative times did not change significantly. Exposure was excellent. No special instruments or energy devices are required; thus, it is cost-effective. Reducing one port for liver retraction gives better cosmetic results. No liver injury due to the device was noticed in any of the cases. This technique is simpler and cheaper and also gives reasonable cosmetic results compared to other techniques described in the literature.

Morphological features of the maxillary incisors roots and relationship with neighbouring anatomical structures: possible implications in endodontic surgery.

PubMed

Taschieri, S; Weinstein, T; Rosano, G; Del Fabbro, M

2012-05-01

The purpose of this study was to investigate the relationship between the root apex of the upper incisors and neighbouring anatomical structures as well as the morphology of the root-end foramen after apicoectomy. Fifty-seven patients requiring endodontic surgical treatment for a maxillary anterior root were enrolled. A preoperative diagnostic computed tomography (CT) scan was analysed to determine: the distance between the anterior wall of the nasopalatine duct and the central (CI-ND) incisor root 4mm from the apex; and the distance between the floor of the nasal cavity and the tip of either the central (CI-NF) or the lateral (LI-NF) incisor root. After apicoectomy, root-end foramen endoscopic pictures were taken in order to characterize their morphology. Fifty-nine central and 26 lateral incisors were evaluated. The average CI-ND was 4.71 ± 1.26 (SD) mm. The average CI-NF was 10.62 ± 2.25 mm. The average LI-NF was 13.05 ± 2.43 mm. The foramen shape after apicoectomy was ovoid to circular in about 90% of cases in both central and lateral incisors. A sound knowledge of the anatomical relationships at the surgical site is essential for the clinician to perform a safe endodontic surgical procedure. Copyright © 2011 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

The gold nun: a case of a gold ligature from the 15th century and the origins of restorative dentistry in Europe.

PubMed

Cunha, Eugénia; Leal, Catarina; Munhós, Miguel; Baptista, Isabel Poiares

2017-12-01

We here report the discovery of a gold dental ligature from the late 15 th century, at the Convent of Santa Clara-a-Velha, in the city of Coimbra, Portugal. A medieval Clare's nun presented the left upper lateral incisor splinted to the canine, since the others three incisors were lost, most probably due to an aggressive periodontal disease. The convent is associated with the medieval upper class, which was well known for its consumption of high levels of sugar. There is a higher prevalence of caries in comparison to other Portuguese skeletal samples of the same time period, as well as a high prevalence of periodontal disease. Thus far, this is one of the earliest findings of dental treatment in Europe.

The chronology and sequence of eruption of human permanent teeth in Northern Ireland.

PubMed

Kochhar, R; Richardson, A

1998-12-01

To ascertain the average and range of ages and sequence of eruption of human permanent teeth, taking into account the effect of premature loss of primary antecedents. Longitudinal study. Caucasian subjects in Northern Ireland. Study casts at 6-monthly intervals from age 5 to 15 years of 276 children (146 males and 130 females) enrolled in the Belfast Growth Study. The mean and range of ages of eruption of each individual tooth were computed. Comparisons were made between the mean ages of eruption with and without premature loss of primary antecedents, between upper and lower arches, between right and left sides and between males and females. The sequence of eruption was also investigated. The means and ranges of eruption ages are reported. Premature loss of primary antecedents delayed eruption of permanent successors except for the upper premolars which were accelerated. The differences relating to the upper first premolar and lower canine were not statistically significant. Each lower tooth erupted before its upper counterpart except for the premolars. There was no significant difference in age of eruption between right and left sides. Females tended to erupt teeth before males with the exception of the second molars in both arches; however, the only differences to reach statistical significance related to upper and lower canines and upper lateral incisors. The most frequent orders of eruption were unique to the subject. These occurred in 22% of upper and 33% of lower arches. The classic sequences: first molar-central incisor-lateral incisor-first premolar-canine-second premolar-second molar (M1-I1-I2-PM1-C-PM2-M2) in the upper arch and I1-M1-I2-C-PM1-PM2-M2 in the lower arch occurred in only 16% of upper arches and 13% of lower arches. Males adhered to the textbook sequence (20% upper, 17% lower) more than females (12% upper, 8% lower). In the upper arch of females, the order M1-I1-I2-PM1-PM2-C-M2 in 10% of subjects was almost as frequent as the classic sequence. The ages, ranges and orders of eruption found in this study are more reliable than many which are frequently quoted on account of its longitudinal nature and the fact that the effect of premature loss of primary antecedents is taken into account. The exclusively Caucasian sample makes the data quite precise but limits applicability to patients of this ethnic origin.

Comparative evaluation of pentraxin 3 levels in GCF during canine retraction with active tieback and NiTi coil spring: An in vivo study.

PubMed

Patel, Pratik; Shanthraj, Ravi; Bhagyalakshmi, A; Garg, Nekta; Vallakati, Anisha

2016-01-01

To compare the levels of pentraxin 3 (PTX-3) in gingival crevicular fluid (GCF) in patients undergoing orthodontic canine retraction with active tieback and nickel titanium (NiTi) coil spring. Fifteen patients of the age group 15-25 years with first premolar extraction undergoing canine retraction were selected. One month after placement of 0.019" × 0.025" stainless steel wire, canine retraction was started with active tieback (150 g force) on upper right quadrant and NiTi coil spring (150 g force) on upper left quadrant. GCF samples were collected 1 h before commencement of canine retraction and thereafter at intervals of 1 h, 1 day, 1 week, and 2 weeks after application of force. The collected GCF was eluted from the microcapillary pipette in 100 μl phosphate-buffered saline (pH 5-7.2). The samples were analyzed for PTX-3 levels by the ELISA technique. The mean levels of PTX-3 at 1 h before canine retraction (baseline) was 1.30 ± 0.22 ng/ml and at 1 h 1.66 ± 0.33 ng/ml, 1 day 2.65 ± 0.09 ng/ml, 1 week 1.96 ± 0.15 ng/ml, and 2 weeks 1.37 ± 0.18 ng/ml in active tieback group. The mean levels of PTX-3 at 1 h before canine retraction was 1.32 ± 0.30 ng/ml, and at 1 h 1.71 ± 0.39 ng/ml, 1 day 2.78 ± 0.12 ng/ml, 1 week 2.52 ± 0.18 ng/ml, and 2 weeks 2.12 ± 0.17 ng/ml in NiTi coil spring group. A significant difference of P < 0.001 was found in PTX-3 levels in GCF during canine retraction between active tieback and NiTi coil spring at 1 day, 1 week, and 2 weeks. The results showed that PTX-3 levels increased from 1 h after application of orthodontic force and reached peak at 1 day, followed by a gradual decrease at 1 week and 2 weeks in both active tie back and NiTi coil spring groups.

Assisted eruption of impacted teeth into an alveolar bone graft in a patient with cleft lip and palate.

PubMed

Peamkaroonrath, Chonthicha; Manosudprasit, Montien; Godfrey, Keith

2008-11-01

To assist the eruption of impacted upper teeth into an alveolar bone graft in a patient with a unilateral cleft lip and palate. An 8-year-old Thai boy with left unilateral complete cleft lip and palate had the chief complaint of anterior crossbite. He presented with a mild skeletal 3, dental Class III subdivision malocclusion, anterior crossbite, left unilateral posterior crossbite, moderate crowding in the upper arch with impaction of upper the left lateral incisor (tooth 22) and canine (tooth 23). In the first phase of treatment the posterior crossbite was corrected with a removable appliance with a 3-way screw. In the second phase the impacted teeth were surgically exposed, moved into the alveolar bone graft and the teeth aligned with fixed appliances. The upper left lateral incisor was extracted because of its questionable longevity. The orthodontic treatment resulted in normal overjet, overbite and an acceptable facial profile. A prosthesis replaced tooth 22. Forced eruption of impacted teeth can be carried out successfully in the cleft patients after an appropriate treatment plan has been formulated and following preparation of alveolar bone graft in the cleft site.

Evaluation of treatment modality for skeletal Class III malocclusion with labioversed upper incisors and/or protrusive maxilla: surgical movement and stability of rotational maxillary setback procedure.

PubMed

Baek, Seung-Hak; Kim, Keunwoo; Choi, Jin-Young

2009-11-01

The purpose of this study was to evaluate the range of surgical movement and stability of rotational maxillary setback (MXS) procedure as treatment modality for skeletal class III malocclusion with labioversed upper incisors and/or protrusive maxilla (CIII/LUI-PM). The samples consisted of 20 adult patients (mean [SD] age, 23.55 [4.30] y) who had CIII/LUI-PM and were treated with rotational MXS and mandibular setback using LeFort I osteotomy and bilateral sagittal split ramus osteotomy. The lateral cephalograms were obtained 1 week before (T0), 1 week after (T1), and 1 year after surgery (T2). The amounts of surgical movement, relapse, and stability rate of the upper central incisor (UIE), upper first molar (U6MBC), point A (A), incisive canal point, and posterior nasal spine (PNS) in relation to the reference planes were statistically analyzed. During T1 - T0, there were backward and downward movements of UIE and A, backward and upward movements of U6MBC, and upward and slight forward movements of PNS due to rotational MXS. The center of rotation of the maxilla was placed between A and the upper premolar area. During T2 - T1, skeletal landmarks showed clinically insignificant counterclockwise rotational relapse (<0.5 mm). The anteroposterior (AP) and vertical positions of skeletal landmarks were more stable than dental landmarks. The U6MBC was more stable in the vertical aspect than UIE (P < 0.01). Posterior nasal spine showed significantly higher stability rate in both vertical and AP aspects (P < 0.01, respectively), whereas UIE showed a lower value in the vertical aspect (P < 0.05). Rotational MXS procedure in cases with CIII/LUI-PM can be regarded as a stable one, especially in the vertical and AP positions of PNS. Vertical relapse in UIE should be managed with postoperative orthodontic treatment.

Quantification of intrusive/retraction force and moment generated during en-masse retraction of maxillary anterior teeth using mini-implants: A conceptual approach.

PubMed

Felicita, A Sumathi

2017-01-01

The aim of the present study was to clarify the biomechanics of en-masse retraction of the upper anterior teeth and attempt to quantify the different forces and moments generated using mini-implants and to calculate the amount of applied force optimal for en-masse intrusion and retraction using mini-implants. The optimum force required for en-masse intrusion and retraction can be calculated by using simple mathematical formulae. Depending on the position of the mini-implant and the relationship of the attachment to the center of resistance of the anterior segment, different clinical outcomes are encountered. Using certain mathematical formulae, accurate measurements of the magnitude of force and moment generated on the teeth can be calculated for each clinical outcome. Optimum force for en-masse intrusion and retraction of maxillary anterior teeth is 212 grams per side. Force applied at an angle of 5o to 16o from the occlusal plane produce intrusive and retraction force components that are within the physiologic limit. Different clinical outcomes are encountered depending on the position of the mini-implant and the length of the attachment. It is possible to calculate the forces and moments generated for any given magnitude of applied force. The orthodontist can apply the basic biomechanical principles mentioned in this study to calculate the forces and moments for different hypothetical clinical scenarios.

Nonextraction Treatment of Severe Crowding with the Aid of Corticotomy-Assisted Orthodontics

PubMed Central

Aljhani, Ali S.; Zawawi, Khalid H.

2012-01-01

This paper illustrates the combined nonextraction orthodontic treatment with the corticotomy technique in an adult patient (age: 25 years and 3 months) with severely crowded arches to accelerate tooth movement and shorten the treatment time. Both her upper lateral incisors were congenitally absent and both upper central incisors' roots were short. Initial fixed orthodontic appliances (bidimensional) were bonded and one week later buccal and lingual corticotomy with alveolar augmentation procedure in the maxilla and mandible was performed. Orthodontic activation to level and align and unravel the crowding was performed every two weeks. The total treatment time was 8 months with no adverse effects observed at the end of active treatment. The addition of the decortication procedure to the conventional orthodontic therapy decreased the duration of treatment significantly. Successful alignment of both arches with ideal overbite and overjet as well as adequate occlusion was achieved. PMID:22848854

Analysis of correlation between initial alveolar bone density and apical root resorption after 12 months of orthodontic treatment without extraction

PubMed Central

Scheibel, Paula Cabrini; Ramos, Adilson Luiz; Iwaki, Lilian Cristina Vessoni; Micheletti, Kelly Regina

2014-01-01

OBJECTIVE: The aim of the present study was to investigate the correlation between initial alveolar bone density of upper central incisors (ABD-UI) and external apical root resorption (EARR) after 12 months of orthodontic movement in cases without extraction. METHODS: A total of 47 orthodontic patients 11 years old or older were submitted to periapical radiography of upper incisors prior to treatment (T1) and after 12 months of treatment (T2). ABD-UI and EARR were measured by means of densitometry. RESULTS: No statistically significant correlation was found between initial ABD-UI and EARR at T2 (r = 0.149; p = 0.157). CONCLUSION: Based on the present findings, alveolar density assessed through periapical radiography is not predictive of root resorption after 12 months of orthodontic treatment in cases without extraction. PMID:25715722

Differences in lightness, chroma, and hue in the anterior teeth of quinquagenarians and septuagenarians.

PubMed

Eiffler, Constantin; Cevirgen, Engin; Helling, Stephan; Zornek, Juanita; Pritsch, Maria; Hassel, Alexander Jochen

2010-10-01

The purpose of this study was to evaluate, for both genders and two elderly age groups, differences in lightness, chroma, and hue of pairs of natural anterior teeth, so that more accurate information on color would be available for the production of dentures with a natural appearance. The subjects in the younger group (YG) were 54 to 56 years of age, those in the older group 73 to 75 (N = 195, 48% women). Tooth color was measured using a spectrophotometer. Mixed models were calculated for each pair of teeth, with gender as a fixed factor. Gender did not have a significant effect in either age group. In both groups, differences in chroma between upper canines and lateral incisors and in lightness and hue between upper and lower canines were observed. In the YG, additional differences were found, with the only exception of the comparison between upper central and lateral incisors. The nongender-specific color differences observed should be considered when producing denture teeth for these groups of patients, in order to come as close as possible to the natural color ideal.

A comparative evaluation of rate of space closure after extraction using E-chain and stretched modules in bimaxillary dentoalveolar protrusion cases.

PubMed

Mitra, Rajat; Londhe, S M; Kumar, Prasanna

2011-04-01

Aim of this study was to compare the rate of space closure between E-chain mechanics in one side of upper arch and by elastomeric module with ligature wire on the contralateral side in same patient. Thirty bimaxillary dentoalveolar protrusion cases were taken up for comprehensive fixed orthodontic treatment after extraction of all first premolars to retract both upper and lower anterior teeth. After initial alignment and levelling, alginate impressions were made for upper and lower arches and models constructed. In the upper arch model a vernier caliper was used to measure the extraction space in both sides from middle point of distal surface of canine to the middle most point of mesial surface of second premolar. This is the amount of space present before the onset of retraction mechanics. During space closure procedure two different retracting components were applied in right and left sides of each case. On right side elastic chain (E-chain) applied in both upper and lower arches and on left side elastomeric module with steel ligature (0.010") stretched double its diameter fixed in both arches. Both the mechanisms produced approximately 250-300 g of force as measured by a tension gauge. After onset of retraction mechanism all patients were recalled after every six weeks for three visits. In all these three visits modules and E-chains were changed. In all three visits impression was made, models constructed, and the remaining available space was measured by a vernier caliper up to 0.1 mm level variations. Mean value for total space closure in case of E-chain was 2.777 mm whereas in case of module with ligature wire the value increased to 3.017 mm. Mean value for rate of space closure in case of E-chain was 0.2143 mm, whereas in case of module with ligature wire the value increased to 0.2343 mm with a standard deviation of 0.001104 and 0.001194, respectively. The standard deviation for total space closure was 0.1305 for E-chain and 0.1487 for module with ligature wire. Space closure by elastomeric module with ligature wire is better than the E-chain.

[Slipped superior rectus in Grave's orbitopathy. A case report].

PubMed

Spielmann, A C

2007-02-01

Superior rectus slippage after its surgical recession is characterized by short-term progressive overcorrection. Similarities with inferior rectus slippage are pronounced, especially a history of Grave's orbitopathy and the use of an adjustable suture. In the present clinical case, upper eyelid retraction and a history of upper eyelid elevator muscle surgery might be specific risk factors, due to the close anatomical links between the superior rectus and the upper eyelid elevator.

Dental Number Anomalies and Their Prevalence According To Gender and Jaw in School Children 7 To 14 Years.

PubMed

Sejdini, Milaim; Çerkezi, Sabetim

2018-05-20

This study aimed to find the prevalence of Hypodontia and Hyperdontia in different ethnicities in patients from 7 to 14 years old. A group of 520 children were included aged 7 to 14 years, only the children who went to primary schools. Controls were performed by professional people to preserve the criteria of orthodontic abnormalities evaluation. The data were recorded in the individual card specially formulated for this research and all the patients suspected for hypodontia and hyperdontia the orthopantomography for confirmation was made. The data were analysed using descriptive statistical analysis using χ 2 test for the significant difference for p ˂ 0.05 and Fisher test for p < 0.05. Hypodontia, not counting the patients with missing third molars was found in 18 patients researched or 3.46%. The most commonly missing teeth were the second lower premolars, the second upper premolars, second upper lateral incisors followed by the lower incisors. Hyperdontia not including the third molars was found in 4 cases of the participants or 0.76% from which the most frequent atypical tooth mesiodens and one case of bilateral hypodontia of a lateral upper incisor with typical shape and size. But there were no significant differences when tested between genders and jaws. The prevalence we found is similar to the prevalence in the region. Our findings indicate that there is a difference between the genders in the prevalence of hypodontia, but without statistical significance, while for hyperdontia we can't see such a difference between the sexes.

Heritability estimates of dental arch parameters in Lithuanian twins.

PubMed

Švalkauskienė, Vilma; Šmigelskas, Kastytis; Šalomskienė, Loreta; Andriuškevičiūtė, Irena; Šalomskienė, Aurelija; Vasiliauskas, Arūnas; Šidlauskas, Antanas

2015-01-01

The genetic influence on dental arch morphology may be country-specific, thus it is reasonable to check the estimates of genetics across different populations. The purpose of this study was to evaluate the heredity of dental arch morphology in the sample of Lithuanian twins with accurate zygosity determination. The study sample consisted of digital dental models of 40 monozygotic (MZ) and 32 dizygotic (DZ) twin pairs. The estimates of heritability (h(2)) for dental arch breadth and length were calculated. All dental arch breadths and lengths were statistically significantly larger in men than in women. Arch length differences between genders were less expressed than largest breadth differences. In the upper jaw the largest genetic effect was found on the arch breadth between lateral incisors. The heritability of dental arch length demonstrated similar differences between upper and lower jaw with mandible dental arch length being more genetically determined. The largest genetic impact was found on the upper dental arch breadth between lateral incisors. Similar, but lower heritability is inherent for canines and first premolars of the upper jaw and first premolars of the lower jaw. It also can be noted, that arch breadths between posterior teeth show lower heritability estimates than between anterior teeth on both jaws. The dental arch in the upper jaw has more expressed genetic component than in the lower jaw.

A revision of hominin fossil teeth from Fontana Ranuccio (Middle Pleistocene, Anagni, Frosinone, Italy).

PubMed

Rubini, Mauro; Cerroni, Vittorio; Festa, Giulia; Sardella, Raffaele; Zaio, Paola

2014-12-01

The Fontana Ranuccio hominin teeth (FR, Latium, Italy) are dated to the Middle Pleistocene. In previous studies these teeth were classified as two lower (left and right) second molars, one lower left central incisor and a badly worn incisor crown, the exact position of which could not be determined. In 2012 these remains were acquired by the Anthropological Service of S.B.A.L. (Italian Ministry of Culture) and for this reason re-analysed. In a thorough revision we have reassessed them both morphologically and dimensionally as two lower (left and right) first molars, one lower left lateral incisor and a possible upper left canine. The comparison with penecontemporaneous and diachronic samples shows that the Fontana Ranuccio teeth are morphologically similar to Atapuerca-Sima de los Huesos, Arago XIII and Neanderthal samples. Copyright © 2014 Elsevier Ltd. All rights reserved.

Anatomoradiographic description of the teeth of pacas bred in captivity (Agouti paca, Linnaeus, 1766).

PubMed

Oliveira, F S; Canola, J C; Oliveira, P T; Pécora, J D; Capelli, A

2006-10-01

Two newborn males, two adult males 9 and 72 months old, one newborn female and two adult females of 30 and 54 months old pacas were used. Animals were radiographed on lateral recumbency, teeth were extracted and the vestibulolingual and mesiodistal lengths were achieved at the occlusal surface, besides the longitudinal length. The lower incisors presented greater length in relation to the other ones and sinuous shape; the upper incisors, relatively smaller, are practically straight. There is no canine tooth, and after a great diastema there is one premolar and three molars in each hemiarcade. In adult pacas, the enamel of incisors presents yellowish colour, mainly in the labial surface; in the premolars and molars, the enamel is present as internal sheets disposed nearly in a parallel way and in vestibulolingual direction, through practically all the dental length, which provides several joined teeth aspect.

Liver retraction system by C3-muco-adhesive polymer films for laparoscopic surgery.

PubMed

Aldeghaither, Saud; Tang, Benjie; Alijani, Afshin; McLean, Donald; Wright, Emma; Wang, Zhigang; Tait, Iain; Cuschieri, Alfred

2016-07-01

Conventional laparoscopic instruments used for retraction may cause trauma at the retraction site. Alternative retraction/lifting especially of heavy solid organs such as the liver may be obtained by other means. The present study was designed to explore the use of C3-muco-adhesive polymers (C3-MAPs), which exhibit strong binding to the liver shortly after application to the organ and which retain strong adhesion for sufficient time, to enable sustained retraction during laparoscopic operations. C3-muco-adhesive polymers were produced specifically for the study. In an ex vivo experimental set-up, discs of C3-MAPs were placed on the surface of porcine livers for adhesion and retraction studies involving objective measurements by tensiometry. Experiments were carried out on 14 porcine livers. The force required to detach the C3-MAPs from the liver exceeded 2.0 N 30 s after application. The adhesion force by C3-MAPs files was sufficient to enable sustained retraction force necessary for exposure of the gall bladder, which was achieved by a mean retraction force of 4.85 N (SD = 0.63). This was sustained for a mean of 130 min (range 17.0-240.0). In the adhesion studies, the forces at 30 s required to detach the polymer discs from the liver exceeded 20 N (upper limit of the load cells of the Instron). The duration of the adhesion enabled sustained optimal gall bladder exposure for periods ranging from 17 to 240 min, with a mean of 130 ± 91 min. The results of the present study demonstrate that the adhesion and retraction properties of the engineered C3-MAP films are sufficient to enable complete exposure of the gall bladder for a period exceeding 1 h, confirming their potential for atraumatic retraction in laparoscopic and other minimal-access surgical approaches.

Correcting the Alar Base Retraction in Crooked Nose by Dissection of Levator Alaque Nasi Muscle.

PubMed

Taş, Süleyman

2016-10-01

Nasal base retraction results from cephalic malposition of the alar base in the vertical plane causing disharmonies in the alar base. In literature, there are some excisional procedures to correct this deformity, but it may result to nostril distortion, stenosis, or upper lip elevation. Here, a new technique is reported for the correction of nasal base retraction in crooked nose by manipulating the levator labii alaeque nasi muscle. Sixteen patients, 6 women and 10 men ranging in age from 21 to 42 years, who have alar retraction with crooked nose, were operated, with a follow-up period of 12 months. Preoperative and postoperative frontal, profile, base, and oblique base views in a standard manner were taken and analyzed with Image software. Comparison of preoperative and postoperative photographs demonstrated that nasal base retractions were corrected in all cases without distortion and recurrence. Nasal obstruction was reduced after surgery, and self-evaluation of nasal patency scores significantly increased in all patients (P < 0.001). Functional and aesthetic outcomes were satisfactory for surgeons and the patients. Careful analysis to identify the deformity and proper selection of the technique will ensure a pleasing outcome. The new techniques presented for the correction of nasal base retraction and prevention of the recurrence of the dorsal deviation will help rhinoplasty surgeons obtain pleasing outcomes.

Employing Tip-Edge brackets on canines to simplify straight-wire mechanics.

PubMed

Rocke, R T

1994-10-01

The straight-wire appliance was developed in part to reduce wire bending and therefore make treatment results more predictable. Because tip prescription is built into the bracket slots, teeth are held at their final crown angulations throughout treatment. Straight-wire brackets are used in an attempt to produce bodily tooth movement. However, teeth tend to tip when a force is applied. This tipping, especially when canines are retracted, can deflect the arch wire causing supereruption of the incisors with a resultant increase in anterior overbite and an open bite in the canine/premolar area. Placing Tip-Edge brackets (TP Orthodontics, Inc., LaPorte, Ind.) on canines and employing tipping and uprighting mechanics on these teeth can overcome these problems. Two cases are presented to illustrate this approach to treatment.

Effect of corticosteroids on orthodontic tooth movement in a rabbit model.

PubMed

Abtahi, M; Shafaee, H; Saghravania, N; Peel, S; Giddon, D; Sohrabi, K

2014-01-01

While there are a growing number of studies on the effects of medications on orthodontic tooth movement (OTM), only few studies have investigated the role of corticosteroids, despite their widespread use. The aim of the current study was to evaluate the effects of triamcinolone acetonide injection on OTM in a rabbit model. Sixteen one-month old rabbits were randomly divided into two groups: Eight rabbits had triamcinolone acetonide (1 mg/kg/day) administered IM daily for 21 days (test group) while the remaining eight rabbits received no drug (control group). The rabbits in both groups had a tube bonded to the upper central incisors and a stainless steel helical spring was inserted in tube slot to apply 50 cN distal force. After 3 weeks, the rabbits were sacrificed and the distance between mesial corners of incisors was measured The incisors are associated tissue was processed for histology and the apical and cervical area of the roots evaluated. An observer who was blind to the study groups evaluated the specimens. All appliance-treated incisors in test and control groups showed evidence of tooth movement. The distance between the incisors was significantly greater in the triamcinolone acetonide treated group compared to the control group (P < 0.001). Histological examination revealed an increased number of resorption lacunae and decreased number of cuboidal osteoblastic cells around the apical and cervical area of the Incisor roots in the test compared to the control group (P < 0.01). Treatment with triamcinolone acetonide is associated with increased tooth movement in rabbits via increased resorptive activity in the alveolar bone.

First records of talon cusps on baboon maxillary incisors argue for standardizing terminology and prompt a hypothesis of their formation.

PubMed

Heaton, Jason L; Pickering, Travis Rayne

2013-12-01

Dental characters can provide vital clues for understanding intra- and intertaxonomic morphological variation and its underlying genetic and environmental components. However, the unambiguous identification of particular traits and their comparative study is often confounded by lack of consistent terminology in the relevant literature. This difficulty is exacerbated when the etiologies are not completely understood, as is the case with talon cusps. To date, research on talon cusps has focused on modern humans. In many instances, descriptions of talon cusps appear in clinical case studies focusing on their treatment and removal. What is lacking in those discussions, though, is a comparative framework, in which the occurrence of talon cusps in nonhuman primates, and possibly other mammals, is established and understood. Here, we report on a taloned upper central incisor of a wild baboon (Papio hamadryas ursinus) from South Africa. The anomalous incisor of this individual includes an exaggerated accessory cusp diagnosed as a Type II talon. Microcomputed tomographic and radiographic analyses show that the taloned cusp possesses enamel, dentin, and pulp. In addition, we identified an unclassifiable talon cusp on a central maxillary incisor of a baboon skull housed in the Smithsonian Institution's Natural History Museum collection. Our observations of talon cusps on baboon incisors demonstrate that, with regard to this phenomenon, systematic study of nonhuman primates is much needed, along with a consistent use of terminology in the anatomical and anthropological literature. Finally, we present a hypothesis of the formation of talon cusps on mammalian incisors. Copyright © 2013 Wiley Periodicals, Inc.

Cone Beam Computed Tomography-based Evaluation of the Anterior Teeth Position Changes obtained by Passive Self-ligating Brackets.

PubMed

Rhoden, Fernando K; Maltagliati, Liliana Á; de Castro Ferreira Conti, Ana C; Almeida-Pedrin, Renata R; Filho, Leopoldino C; de Almeida Cardoso, Maurício

2016-08-01

The objective of this study was to evaluate the anterior teeth position changes obtained by passive self-ligating brackets using cone beam computed tomography (CBCT). Twenty patients with a mean age of 16.5 years, class I malocclusion, constricted maxillary arch, and teeth crowding above 5 mm were enrolled in this study, and treated by passive orthodontic self-ligating brackets. A sequence of stainless steel thermoset wire was implemented with ending wire of 0.019" × 0.025". The CBCT and dental casts were obtained prior to the installation of orthodontic appliances (T1), and 30 days after rectangular steel wire 0.019" × 0.025" installation (T2). The measurements in CBCT were performed with the Anatomage software, and the dental casts were evaluated with a digital caliper rule with an accuracy of 0.01 mm. The CBCT data demonstrated mean buccal inclination of the upper and lower central incisors ranging from 6.55° to 7.24° respectively. The upper and lower lateral incisors ranged from 4.90° to 8.72° respectively. The lower canines showed an average increase of 3.88° in the buccal inclination and 1.96 mm in the transverse intercuspal distance. The upper canines showed a negative inclination with mean average of -0.36°, and an average increase of 0.82 mm in the transverse distance, with negative correlation with the initial crowding. Treatment with passive self-ligating brackets without obtaining spaces increases buccal inclination of the upper and lower incisors with no correlation with the amount of initial teeth crowding. The intercanine distance tends to a small increase showing different inclinations between the arches. When taking into account the self-ligating brackets, the amount of initial dental crowding is not a limitation factor that could increase the buccal inclination of the anterior teeth.

Biomechanical aspects of segmented arch mechanics combined with power arm for controlled anterior tooth movement: A three-dimensional finite element study.

PubMed

Ozaki, Hiroya; Tominaga, Jun-Ya; Hamanaka, Ryo; Sumi, Mayumi; Chiang, Pao-Chang; Tanaka, Motohiro; Koga, Yoshiyuki; Yoshida, Noriaki

2015-01-01

The porpose of this study was to determine the optimal length of power arms for achieving controlled anterior tooth movement in segmented arch mechanics combined with power arm. A three-dimensional finite element method was applied for the simulation of en masse anterior tooth retraction in segmented power arm mechanics. The type of tooth movement, namely, the location of center of rotation of the maxillary central incisor in association with power arm length, was calculated after the retraction force was applied. When a 0.017 × 0.022-in archwire was inserted into the 0.018-in slot bracket, bodily movement was obtained at 9.1 mm length of power arm, namely, at the level of 1.8 mm above the center of resistance. In case a 0.018 × 0.025-in full-size archwire was used, bodily movement of the tooth was produced at the power arm length of 7.0 mm, namely, at the level of 0.3 mm below the center of resistance. Segmented arch mechanics required shorter length of power arms for achieving any type of controlled anterior tooth movement as compared to sliding mechanics. Therefore, this space closing mechanics could be widely applied even for the patients whose gingivobuccal fold is shallow. The segmented arch mechanics combined with power arm could provide higher amount of moment-to-force ratio sufficient for controlled anterior tooth movement without generating friction, and vertical forces when applying retraction force parallel to the occlusal plane. It is, therefore, considered that the segmented power arm mechanics has a simple appliance design and allows more efficient and controllable tooth movement.

The effect of epidermal growth factor on neonatal incisor differentiation in the mouse.

PubMed

Topham, R T; Chiego, D J; Gattone, V H; Hinton, D A; Klein, R M

1987-12-01

The effect of epidermal growth factor (EGF) on cellular differentiation of the neonatal mouse mandibular incisor was examined autoradiographically using tritiated thymidine ([3H]TDR) and tritiated proline ([3H]PRO). On days 0 (day of birth), 1, and 2, EGF was administered (3 micrograms/g body wt) sc to neonates. Mice were killed on Days 1, 4, 7, 10, and 13 after birth and were injected with either [3H]TDR or [3H]PRO 1 hr before death. [3H]TDR was used to analyze cell proliferation in eight cell types in the developing mouse incisor including upper (lingual) and lower (buccal) pulpal fibroblasts, preodontoblasts, inner and outer enamel epithelial cells (IEE and OEE), stratum intermedium (SI), stellate reticulum (SR), and periodontal ligament (PDL) fibroblasts. [3H]PRO was used to analyze protein synthesis in ameloblasts, and their secretion products (enamel and dentin), as well as PDL fibroblasts. The selected EGF injection scheme elicited acceleration of incisor eruption with minimal growth retardation. At Day 1, the upper and lower pulp, preodontoblasts, SI, and SR showed a significant decrease in labeling index (LI) 24 hr after a single EGF injection. After multiple injections (Days 0, 1, 2), two LI patterns were observed. In lower pulp, preodontoblasts, IEE, SI, SR, and OEE, a posteruptive change in LI was observed. In contrast, the upper pulp and PDL regions demonstrated a direct temporal relationship with eruption. Autoradiographic analysis with [3H]PRO indicated that EGF treatment caused significant increases in grain counts per unit area in ameloblast, odontoblast, and PDL regions studied. Significant differences were found in all four regions studied (ameloblasts, enamel, odontoblasts, dentin) at the 45-microns-tall ameloblast level as well as ameloblasts and odontoblasts at the 30-microns level at 13 days of age. The PDL demonstrated significant differences at all locations studied (base, 30 microns, 45 microns,) in 4-, 7-, and 13-day-old mice. Morphologically, EGF-treated groups demonstrated premature differentiation of ameloblasts and odontoblasts at the light microscopic level. The data indicate that EGF alters DNA and protein synthesis as well as differentiation patterns during the eruption process. While EGF affects both DNA and protein synthesis, the alteration of differentiation may be secondary to mitogenic effects on proliferative compartments. In order to determine the cellular target for EGF within the newborn mouse incisor, in vivo 125I-EGF binding was analyzed autoradiographically.(ABSTRACT TRUNCATED AT 400 WORDS)

Medication-related osteonecrosis of the jaw. Introduction of a new modified experimental model.

PubMed

Curra, Cláudia; Cardoso, Camila Lopes; Ferreira, Osny; Curi, Marcos Martins; Matsumoto, Mariza Akemi; Cavenago, Bruno Cavalini; Santos, Pâmela Letícia Dos; Santiago, Joel Ferreira

2016-05-01

To evaluate a modified experimental model for medication-related osteonecrosis of the jaw (MRONJ) through the upper right central incisor extraction followed by intravenous bisphosphonate administration. Forty five rats underwent the upper right central incisor tooth extraction were divided in 2 groups: Group I - experimental group, 30 rats received an intravenous administration protocol of zoledronic acid 35μg/kg into the tail vein every two weeks, totalizing four administrations, during eight weeks of administration, previously the extraction, and Group II - control group, 15 rats didn't received any medication before extraction. The groups were subdivided in postoperative periods: 14/28/42 days. Clinical analysis and microtomography were performed to verify the presence of osteonecrosis. In addition, descritive histological analysis of hematoxylin-eosin stained sections was performed to evaluate the presence of osteonecrosis or necrotic foci. Twelve (40%) rats, from experimental group, showed clinical signs of MRONJ (p=0.005), however, all samples showed imaginologic findings like osteolysis and loss of integrity of the cellular walls (p≤0.001). Microscopic evaluation revealed osteonecrosis areas with microbial colonies and inflammatory infiltrate (p≤0.001). In the control group, all animals presented the chronology of a normal wound healing. The presence of medication-related osteonecrosis of the jaw after maxillary central incisor extraction in rats. This new experimental model may be considered an option for the study of MRONJ.

Airbag Trails-2

NASA Technical Reports Server (NTRS)

2004-01-01

This segment of the first color image from the panoramic camera on the Mars Exploration Rover Spirit shows the rover's airbag trails (upper left). These depressions in the soil were made when the airbags were deflated and retracted after landing.

An Approach with Hybrid Segmental Mechanics.

PubMed

Mishra, Harsh Ashok; Maurya, Raj Kumar

2016-06-01

Present case report provides an insight into the hybrid segmental mechanics with treatment of 13-year-old male, considering the side effects of sole continuous arch wire sliding mechanics. Patient was diagnosed as a case of skeletal class I jaw relationship, low mandibular plane angle, class II molar relation on right and class I molar relation on left side, anterior cross bite, crowding of 12mm in upper, 5mm in lower arch. He also had proclined upper and lower anteriors by 2mm, convex profile and incompetent lips. Total treatment duration was 20 months, during which segmental canine retraction was performed with TMA (Titanium, Molybdenum, Aluminum) 'T' loop retraction spring followed by consolidation of spaces with continuous arch mechanics. Most of the treatment objectives were met with good intraoral and facial results within reasonable framework of time. This approach used traditional twin brackets, which offered the versatility to use continuous arch-wire mechanics, segmental mechanics and hybrid sectional mechanics.

Disk suspension method: a novel and safe technique for the retraction of the liver during laparoscopic surgery (with video).

PubMed

Shibao, Kazunori; Higure, Aiichiro; Yamaguchi, Koji

2011-08-01

A good operative field is important for safe operations, but it is sometimes difficult to obtain a satisfactory operative field in laparoscopic upper abdominal surgery. We developed a novel and safe technique for the retraction of the liver and falciform ligament during laparoscopic surgery, and evaluated its technical feasibility and safety. Forty-three patients with gastric cancer were divided into two groups: disk suspension group (DS group; snake retractor and elastic band fixation with a silicon disk), and fixed retractor group (FR group; snake retractor and nonelastic band fixation without a silicon disk). To evaluate liver damage during retraction, we measured the aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels preoperatively and on postoperative day (POD) 1. In the DS group, all liver lobes were adequately retracted and the hepatoduodenal and gastrohepatic ligaments were fully exposed. This procedure took less than 3 min. On the other hand, 5 of 18 patients of the FR group had insufficient surgical fields for laparoscopic gastrectomy because of soft and/or large livers. Although the preoperative AST and ALT levels were not different between the two groups, the DS group did not display increases in both AST and ALT levels, whereas the FR group showed increases in both on POD 1 (AST: 50.2 ± 8.4 IU/l vs. 124.2 ± 37.7 IU/l, P = 0.07; and ALT: 35.6 ± 6.4 IU/l vs. 106.1 ± 36.2 IU/l, P = 0.07). No complications related to the liver retraction were observed in the DS group. However, liver congestion was evident in six patients and minor liver injury in two patients of the FR group during the esophagojejunostomy. The DS method is a simple and safe and provides a better surgical field during laparoscopic surgery of the upper abdomen without damaging the liver.

Comparative evaluation of anchorage reinforcement between orthodontic implants and conventional anchorage in orthodontic management of bimaxillary dentoalveolar protrusion.

PubMed

Chopra, S S; Mukherjee, Manish; Mitra, Rajat; Kochar, Gagan Deep; Kadu, Abhijeet

2017-04-01

Increased upper lip procumbency is commonly associated with maxillary dentoalveolar protrusion with the major goal of reducing maxillary dentoalveolar protrusion. The treatment plan usually includes extraction of the maxillary first premolars, followed by retraction of anterior teeth with maximum anchorage. Dental implants have been widely accepted as successful adjuncts for obtaining maximum anchorage in orthodontic treatment. 50 subjects between the ages of 13 and 17 years having bimaxillary dentoalveolar protrusion were included in the study. The patients were divided into two groups. Both groups received treatment with 0.022″ MBT prescription preadjusted edgewise appliance system. In addition, subjects of Group 'I' received the Nance button and lingual arch as anchorage reinforcement in the upper and lower arches, respectively. Subjects of Group 'II' received self-drilling titanium OI for anchorage reinforcement. Significant retraction was achieved in all cases with good vertical control. Anchor loss was observed in both groups. Anchor loss was much higher in Group I compared to Group II, and an intergroup comparison for anchor loss was highly significant. Implants as anchorage, for en masse retraction, can be incorporated into orthodontic practice. The use of orthodontic implants for anchorage is a viable alternative to conventional molar anchorage.

Dental fragment embedded in the lower lip after facial trauma: Brief review literature and report of a case

PubMed Central

Lauritano, Dorina; Petruzzi, Massimo; Sacco, Gerardo; Campus, Guglielmo; Carinci, Francesco; Milillo, Lucio

2012-01-01

Upper incisors are the most frequently involved teeth in traumatic dental injuries. Soft tissues (lips and/or oral mucosa) adjacent to incisal edge can receive direct and/or indirect traumas. Laceration of the lower lip is a not rare eventuality and teeth fragments could be embedded in labial soft tissue. The reattachment of these fragments, if possible, is the elective treatment choice, thanks to the modern adhesive and restorative techniques. The authors present a case of a white Caucasian 10-year-old child, who attended the dental clinic for the treatment of both upper central incisors’ crown fractures. The fragment of the left incisor was retrieved embedded in the lower lip. It was successfully surgically removed and reattached using a composite adhesive technique. A careful clinical and radiographic examination with the surgical removal of tooth fragments could prevent undesirable foreign body reaction, infection and scarring. The authors also reviewed the most relevant literature concerning tooth fragment reattachment after removal from oral soft tissues. PMID:23814592

Review of various liver retraction techniques in single incision laparoscopic surgery for the exposure of hiatus.

PubMed

Palanivelu, Praveenraj; Patil, Kedar Pratap; Parthasarathi, Ramakrishnan; Viswambharan, Jaiganesh K; Senthilnathan, Palanisami; Palanivelu, Chinnusamy

2015-01-01

The main aspect of concern for upper GI procedures has been the retraction of the liver especially large left lobes as commonly encountered in Bariatric surgery. Not doing so would compromise the view of the hiatus, hence theoretically reducing the quality of the surgery and increasing the possibility of complications. The aim of this study was to review the various liver retraction techniques in single incision surgery being done at our institute and analyze them. A retrospective study of the various techniques and a subsequent analysis was made based on advantages and disadvantages of each method. Objectively a quantitative measure of hiatal exposure was done using a scoring system based on the grade of exposure after reviewing the surgical videos. From January 2011 to January 2013 total 104 patients underwent single incision surgery with the various liver retraction techniques with following grades of exposure -liver suspension tube technique with naso gastric tubing (2.11) and with corrugated drain (2.09) needlescopic method (1.2), Umbilical tape sling (1.95), crural stitch method (2.5). Needeloscopic method has the best grade of exposure and is the easiest to start with. The average time to create the liver retraction was 2.8 to 8.6 min.There was no procedure related morbidity or mortality. The mentioned liver retraction techniques are cost effective and easy to learn. We recommend using these techniques to have a good exposure of hiatus, without compromising the safety of surgery in single incision surgery.

Class II treatment in adults: comparing camouflage orthodontics, dentofacial orthopedics and orthognathic surgery--a cephalometric study to evaluate various therapeutic effects.

PubMed

Kinzinger, Gero; Frye, Linda; Diedrich, Peter

2009-01-01

It was the aim of this clinical study to compare the skeletal and dentoalveolar effects as well as those on the profile of three different treatment approaches in Class II patients (camouflage orthodontics, dentofacial orthopedics, and combined orthodontic and surgical treatment). Our study cohort consisted of 60 young adults presenting a skeletal Class II, Division 1 malocclusion: 20 patients whose overjet was reduced by camouflage following premolar extraction, 20 patients whose occlusions were corrected by placement of a fixed functional orthopedic appliance, and 20 who underwent orthognathic surgery (bilateral sagittal split osteotomy of the mandible without genioplasty). We documented the therapeutic progress using cephalometry. Each patient group achieved a reduction in overjet via their respective treatment. While no treatment-related changes in the maxillary area were assessable, the effects on the mandible differed. We observed advancement of the bony chin and an increase in mandibular length in the sagittal-diagonal dimension in the surgical and functional orthopedic groups. However, the extent of the treatment-related changes was significant only in the group of patients that had undergone orthognathic surgery. Only the surgical group presented changes in vertical relationships. Incisor repositioning as an outcome of the respective treatments differed fundamentally, with those in the surgical group revealing significant protrusion of the upper incisors. The maxillary incisors were retruded and mandibular incisors proclined in the functional orthopedic group, whereas the upper and lower incisors both retruded significantly in the extraction group. Soft-tissue remodeling bore no linear relationship to treatment-induced skeletal and dental effects. Still, orthognathic surgery led to the most marked profile changes. Treatment using fixed functional orthopedic appliances reduced the convexity of the soft-tissue profile at least moderately. Camouflage orthodontics, on the other hand, resulted in an increase in the nasolabial angle. In young adults fixed functional appliances are a treatment alternative to extraction therapy but to a lesser extent to orthognathic surgery. Because of their limited skeletal effects and minor changes in the profile they are indicated only in patients with a moderately severe Class II malocclusion. Pre-treatment proclined mandibular incisors limit the scope of indications for fixed functional appliances, as they can cause an increase in lower incisor proclination. Significant reductions in profile convexity are achievable only by combined orthodontic and surgical treatment of the malocclusion. When performing camouflage orthodontics in conjunction with maxillary premolar extractions in adults, an increase in the nasolabial angle, which is often esthetically undesirable, has to be discussed as a potential side effect and has to be taken into account when considering the different therapeutic approaches.

Morphologic evaluation of dentoalveolar structures of mandibular anterior teeth during augmented corticotomy-assisted decompensation.

PubMed

Ahn, Hyo-Won; Seo, Dong-Hwi; Kim, Seong-Hun; Park, Young-Guk; Chung, Kyu-Rhim; Nelson, Gerald

2016-10-01

Our aim in this study was to evaluate the effect of augmented corticotomy on the decompensation pattern of mandibular anterior teeth, alveolar bone, and surrounding periodontal tissues during presurgical orthodontic treatment. Thirty skeletal Class III adult patients were divided into 2 groups according to the application of augmented corticotomy labial to the anterior mandibular roots: experimental group (with augmented corticotomy, n = 15) and control group (without augmented corticotomy, n = 15). Lateral cephalograms and cone-beam computed tomography images were taken before orthodontic treatment and before surgery. The measurements included the inclination and position of the mandibular incisors, labial alveolar bone area, vertical alveolar bone height, root length, and alveolar bone thickness at 3 levels surrounding the mandibular central incisors, lateral incisors, and canines. The mandibular incisors were significantly proclined in both groups (P <0.001); however, the labial movement of the incisor tip was greater in the experimental group (P <0.05). Significant vertical alveolar bone loss was observed only in the control group (P <0.001). The middle and lower alveolar thicknesses and labial alveolar bone area increased in the experimental group. In the control group, the upper and middle alveolar thicknesses and labial alveolar bone area decreased significantly. There were no significant differences in dentoalveolar changes between the 3 kinds of anterior teeth in each group, except for root length in the experimental group (P <0.05). Augmented corticotomy provided a favorable decompensation pattern of the mandibular incisors, preserving the periodontal structures surrounding the mandibular anterior teeth for skeletal Class III patients. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Orthodontic treatment of a patient with unerupted maxillary central and lateral incisors and canine: a case report.

PubMed

Sabuncuoğlu, Fidan Alakuş; Olmez, Hüseyin

2012-05-01

The aim of this case report was to describe the orthodontic and periodontal management of a patient with three impacted anterior teeth. An 18-year-old female with Class I crowding on a Class I skeletal base presented with the chief complaint of an unaesthetic smile. Clinical examination revealed an impacted upper right permanent canine (13), lateral (12) and central incisor (11), a retained deciduous incisor and moderate crowding in the lower arch. The impacted teeth were surgically exposed (closed exposure) and aligned with fixed appliances. The 12 was extracted due to root resorption and 44 extracted to resolve the lower arch crowding. A fraenectomy and gingival recontouring were required. Orthodontic treatment resulted in improved overjet, overbite and an acceptable facial profile. The patient reported improved self esteem. While impacted anterior teeth are a clinical challenge, their surgical exposure, in combination with fixed appliances, is a conservative treatment plan which is not without complications.

[Evaluation of the correction of the skeletal class III malocclusion by distalization of the whole mandible dentition with micro-implant anchorage].

PubMed

2017-06-18

To evaluate the clinical effect of distalizing mandibular dentition with micro-implant in patients with skeletal class III malocclusion. In the study, 20 patients with skeletal class IIImalocclusion were selected. They are consist of 8 males and 12 female with an age range from 16 to 38 years old and an average age of (21.5±5.6) years.They were treated with straight wire technique and the implant were inserted into the mandibular external oblique line to distlize the lower dentition to a class I molar relationships. Cephalometrics films were taken before and after treatment. The changes of hard tissue and soft tissue were analyzed by evaluating 26 measurement measurements. Class I molar relationships were achieved, and the profile were improved after treatment. ANB increased by (0.80±1.02) °,Wits increased by (1.67±1.74) mm,after treatment (P<0.05). The lower dentition were significantly retracted after treatment with L1-NB distance decreased by(2.64±1.50) mm, P<0.05; the mesial buccal cusp and mesial root of the lower first molars were retracted by (3.26±1.95) mm and (0.79±1.27) mm respectively (P<0.05); the mesial buccal cusp of the lower second molars were retracted by (3.06±1.80) mm (P<0.05). After treatment, mandibular teeth got up-righted distally. From incisors to molar, L1/MP, L5/MP, L6/MP, L7/MP angle decreased by (6.37±8.53)°, (10.59±8.50)°, (11.48±7.22)°, (15.72±7.16)°on average respectively (P<0.05), all of those changes had the statically significant effects. Soft tissue change after treatment, the distance from lower lip to esthetic plane were decreased by (1.70±1.59) mm on average (P<0.05). Distalizing mandibular dentition with micro-implant can get an satisfying result in patients with skeletal class III malocclusion, the lower teeth were retracted by controlled tipping movement.

[Study of skin retraction applied to the treatment of skin tumors. Mapping of the human body].

PubMed

Dumas, P; Benatar, M; Cardot-Leccia, N; Lebreton, E; Chignon-Sicard, B

2012-04-01

Skin, the main organ of the human body, is equipped with own biomechanical characteristics, highly variable depending on intra-individual factors (location, weight status, dermatological diseases…) and interindividual (age, sex…). Despite some recent cutometric studies, our review of the literature shows that there is no currently reliable analytical model representing the biomechanical behavior of the skin. Yet, this is a central issue in dermatology surgery, especially in the treatment of skin tumors, for the proper observance of surgical margins. We studied prospectively on 75 resection specimens (about 71 patient(s)), for the treatment of skin lesions tumor suspicious or known malignant or benign. Room dimensions were measured before and 5 minutes after excision, leading us to calculate a ratio of retraction of the skin surface. This retraction was correlated with age, gender, tumor type, and anatomic location of the site of excision. The power of retraction of the skin varies significantly by region of the body. It is maximum in the upper limb (hand excluded) and in the cervical region. At the cephalic region, skin of the ear and periorbital skin have capacities of important early retraction. Unlike the lower limb (foot excluded), the back skin of the nose and face appear to be a minimum of shrinkage. Age also seems to change on that capacity shrinkage, sex would have no influence. Our study confirms the variations in the ability of skin retraction based on a number of factors. In dermato-oncology, that power retraction could cause significant differences between clinical surgical margins and final pathologist margins. We believe it must be taken into account by the couple surgeon-pathologist, especially in the context of invasive and/or recurrent tumors. Copyright © 2012. Published by Elsevier SAS.

Cephalometric norms for orthognathic surgery for North India (Eastern Uttar Pradesh).

PubMed

Gulati, Rajeev; Jain, Shikha

2011-01-01

The present study was aimed at development of the cephalometric norms for orthognathic surgery for the population of eastern Uttar Pradesh in North India. This study was conducted at a dental college. The study sample consisted of 50 males and 50 females. Each lateral cephalogram was taken in occlusion and subsequently traced. All reference points, landmarks, and measurements were made according to cephalometrics for orthognathic surgery (COGS) system. The statistical analysis involved calculation of mean and standard deviation for each of the 23 parameters assessed for each subject. The data was subsequently compared with COGS study by using Normal (Z) test. The norms were derived for the purvanchal population of North India and these were found to be quite distinct compared to those obtained from COGS study with respect to specific parameters. Male subjects indicated greater prominence of chin relative to the face, decreased posterior divergence, infraeruption of upper and lower molar as well as lower incisors, decreased total effective length of the maxilla, tendency towards Class III occlusion, and procumbent lower incisors. Female subjects, however, indicated increased anterior cranial base length, greater prominence of chin relative to the face, prognathic maxilla and mandible, increased middle third facial height, infraerupted lower incisors, increased mandibular body length, and procumbent lower incisors.

Space probe/satellite ejection apparatus for spacecraft

NASA Technical Reports Server (NTRS)

Smyly, H. M.; Miller, C. D.; Cloyd, R. A.; Heller, C. (Inventor)

1984-01-01

An ejection apparatus for spinning and propelling objects for ejection from a spacecraft at a desired velocity and rotational speed is discussed. The apparatus includes a launch cradle on which the space object to be ejected rests. The cradle is rotatably supported by a central hub secured to the upper end of the pneumatic cylinder piston shaft. Release mechanisms consisting of a retractable pin and locking lug is utilized to hold the cradle and object to be ejected. The release mechanism has a fixed barrier member which holds the retractable pin in engagement with the locking lug until release by upward movement of the launch cradle beyond the barrier height.

Biologic restoration of a traumatized maxillary central incisor in a toddler: a case report.

PubMed

John, Sheen Ann; Anandaraj, S; George, Sageena

2014-01-01

Trauma to the anterior teeth is relatively common in young children and teenagers. Traumatized anterior teeth require quick functional and aesthetic repair, and poses a challenge to the dental practitioner owing to the lack of co-operation ceded and the longer time invested. Reattachment of tooth fragment should be the first choice to restoring teeth when a usable fragment is available, since it gives a psychological and aesthetic advantage over the conventional technique. With the vast improvement in adhesive technology, reattachment is definitely a predictable treatment option for very young children. This paper describes the treatment of a 2½ year old female child who sustained crown-root fracture, extending subgingivally, in primary upper central incisor.

The effectiveness of pendulum, K-loop, and distal jet distalization techniques in growing children and its effects on anchor unit: A comparative study.

PubMed

Marure, Pravinkumar S; Patil, Raju Umaji; Reddy, Sumitra; Prakash, Amit; Kshetrimayum, Nillachandra; Shukla, Rajeevkumar

2016-01-01

A common strategy to correct Class II malocclusions using a nonextraction protocol in children is to move the maxillary molars distally using molar distalization appliances, which usually derive their anchorage from maxillary premolars, causing mesialization of premolars and protrusion of incisors. To evaluate the skeletal, dental and soft tissue changes produced by three different distalizing appliances, namely, pendulum, K-loop, and distal jet appliances. Sixty-six children of mean age 14.13 years requiring molar distalization were divided into three groups: Group I (pendulum appliance), Group II (K-loop), and Group III (distal jet). Lateral cephalometric films were taken before and after 5 months of molar distalization and following cephalometric parameters were used to assess the effects of maxillary molar distalization, namely, anteroposterior skeletal (SNA/SNB/ANB), vertical skeletal (face height ratio/Frankfort-mandibular plane [FMA]/angle formed between Maxillary plane & Mandibular plane (MM)), interdental (overjet/overbite), maxillary dentoalveolar, and soft tissue parameters. There was no significant age difference between the three groups. In overall treatment changes among the three groups, the Anteroposterior skeletal changes were not statistically significant, vertically FMA angle increased by 1.79° ± 2.25° and overbite reduced by 2.38 ± 1.83 mm. The maxillary first molars were distalized by an average of 4.70 ± 3.01 mm (Upper 6 [U6] to pterygoid vertical [PTV]). The maxillary central incisor labial tipping increased to an average of 1.61 ± 2.73 mm and cant of upper lip increased by 3.40° ± 5.88° are statistically significant (P < 0.05). All three distalization techniques in growing children produced significant effects on anchor unit. There was an increase in FMA angle, significant bite opening, proclination of the maxillary incisors and increase in the cant of the upper lip.

Orthodontic camouflage of skeletal Class III malocclusion with miniplate: a case report

PubMed Central

Farret, Marcel Marchiori; Farret, Milton M. Benitez; Farret, Alessandro Marchiori

2016-01-01

ABSTRACT Introduction: Skeletal Class III malocclusion is often referred for orthodontic treatment combined with orthognathic surgery. However, with the aid of miniplates, some moderate discrepancies become feasible to be treated without surgery. Objective: To report the case of a 24-year-old man with severe skeletal Angle Class III malocclusion with anterior crossbite and a consequent concave facial profile. Methods: The patient refused to undergo orthognathic surgery; therefore, orthodontic camouflage treatment with the aid of miniplates placed on the mandibular arch was proposed. Results: After 18 months of treatment, a Class I molar and canine relationship was achieved, while anterior crossbite was corrected by retraction of mandibular teeth. The consequent decrease in lower lip fullness and increased exposure of maxillary incisors at smiling resulted in a remarkable improvement of patient's facial profile, in addition to an esthetically pleasing smile, respectively. One year later, follow-up revealed good stability of results. PMID:27653269

Orthodontic camouflage of skeletal Class III malocclusion with miniplate: a case report.

PubMed

Farret, Marcel Marchiori; Farret, Milton M Benitez; Farret, Alessandro Marchiori

2016-01-01

Skeletal Class III malocclusion is often referred for orthodontic treatment combined with orthognathic surgery. However, with the aid of miniplates, some moderate discrepancies become feasible to be treated without surgery. To report the case of a 24-year-old man with severe skeletal Angle Class III malocclusion with anterior crossbite and a consequent concave facial profile. The patient refused to undergo orthognathic surgery; therefore, orthodontic camouflage treatment with the aid of miniplates placed on the mandibular arch was proposed. After 18 months of treatment, a Class I molar and canine relationship was achieved, while anterior crossbite was corrected by retraction of mandibular teeth. The consequent decrease in lower lip fullness and increased exposure of maxillary incisors at smiling resulted in a remarkable improvement of patient's facial profile, in addition to an esthetically pleasing smile, respectively. One year later, follow-up revealed good stability of results.

[Alveolar bone thickness in A point area : how to avoid periodontal failures in front of upper incisors].

PubMed

Chevalier, Émilie; Philip-Alliez, Camille; Le Gall, Michel

2016-03-01

Studies on orthodontic-periodontics relationships are numerous but few have benefited from the contribution of new 3D imaging techniques that emphasize iatrogenic effects that orthodontics may have on the periodontium. Periodontal risk in terms of fenestration, bone dehiscences next maxillary incisors are real during or after orthodontic treatment. The accurate assessment of the initial situation in terms of bone quantity in this dental arch anterior segment is thus very important. Our study aimed to evaluate the reliability of conventional lateral cephalograms to quantify alveolar bone thickness in relation to the maxillary incisors by comparing it with data from CT scans. The second objective was to identify an at risk patient profile by assessing possible correlations between this thickness and dysmorphia components. The results revealed a half of assessment error in the estimation of bone thickness and increased risk in case of hyperdivergence typology, Class III skeletal relationships and dento-alveolar protrusion. Finally, in view of these data, we discussed the clinical procedures to avoid such periodontal failures in this anterior segment of the dental arch. © EDP Sciences, SFODF, 2016.

Perception of altered smile esthetics among Moroccan professionals and lay people.

PubMed

Ousehal, L; Aghoutan, H; Chemlali, S; Anssari, I Filali; Talic, N

2016-10-01

To evaluate and compare the impact of altered smile characteristics on the perception of smile esthetics between Moroccan dentists and lay people. Thirty-four digital smile photographs displaying alterations in crown length and width, lateral incisor gingival margin position, gingival exposition, midline diastema, and upper midline deviation were presented to a sample of 30 dentists and 30 lay people. The ratings were assessed with a visual analog scale. Compared to that of lay people, Moroccan dentists' evaluation of the gingival smile was more critical when the decrease in central incisor crown length was 2.5 mm ( p  < 0.001) or greater and when the increase in gingival exposition was 4 mm or greater ( p  < 0.01). Moroccan dentists were also critical in their evaluation of maxillary lateral incisor crown width alterations ( p  < 0.05) and incisal midline deviations ( p  < 0.05). However, the professionals and lay people similarly evaluated irregularities in the incisor gingival margin position. Increases in the midline diastema were judged critically by both Moroccan dentists and lay people. In this sample, Moroccan dentists evaluate smile esthetic alterations more critically than Moroccan lay people. This difference in perception of smile discrepancies must be taken into account during the finishing phases of orthodontic treatment and restoration of the anterior teeth in Moroccan patients.

Predictors of favorable soft tissue profile outcomes following Class II Twin-block treatment.

PubMed

Kim, Ji-Eun; Mah, Su-Jung; Kim, Tae-Woo; Kim, Su-Jung; Park, Ki-Ho; Kang, Yoon-Goo

2018-01-01

The aim of this study was to determine cephalometric factors that help predict favorable soft-tissue profile outcomes following treatment with the Class II Twin-block appliance. Pre- and post-treatment lateral cephalograms of 45 patients treated with the Class II Twin-block appliance were retrospectively analyzed. Profile silhouettes were drawn from the cephalograms and evaluated by three orthodontists in order to determine the extent of improvement. Samples were divided into a favorable group (upper 30% of visual analogue scale [VAS] scores, n = 14) and an unfavorable group (lower 30% of VAS scores, n = 14). Skeletal and soft-tissue measurements were performed on the cephalograms and an intergroup comparison was conducted. An independent t -test revealed that the following pre-treatment values were lower in the favorable group compared to the unfavorable group: lower incisor to mandibular plane angle, lower incisor to pogonion distance, point A-nasion-point B angle, sella-nasion line (SN) to maxillary plane angle, SN to mandibular plane angle, gonial angle, and symphysis inclination. The favorable group had a larger incisor inclination to occlusal plane. Moreover, the favorable group showed larger post-treatment changes in gonial angle, B point projection, and pogonion projection than did the unfavorable group. Class II malocclusion patients with a low divergent skeletal pattern and reduced lower incisor protrusions are likely to show more improvement in soft-tissue profile outcomes following Class II Twin-block treatment.

Angle Class I malocclusion treated with lower incisor extraction.

PubMed

Barbosa, Vanessa Leal Tavares

2013-01-01

In planning orthodontic cases that include extractions as an alternative to solve the problem of negative space discrepancy, the critical decision is to determine which teeth will be extracted. Several aspects must be considered, such as periodontal health, orthodontic mechanics, functional and esthetic alterations, and treatment stability. Despite controversies, extraction of teeth to solve dental crowding is a therapy that has been used for decades. Premolar extractions are the most common, but there are situations in which atypical extractions facilitate mechanics, preserve periodontal health and favor maintenance of the facial profile, which tends to unfavorably change due to facial changes with age. The extraction of a lower incisor, in selected cases, is an effective approach, and literature describes greater post-treatment stability when compared with premolar extractions. This article reports the clinical case of a patient with Angle Class I malocclusion and upper and lower anterior crowding, a balanced face and harmonious facial profile. The presence of gingival and bone recession limited large orthodontic movements. The molars and premolars were well occluded, and the discrepancy was mainly concentrated in the anterior region of the lower dental arch. The extraction of a lower incisor in the most ectopic position and with compromised periodontium, associated with interproximal stripping in the upper and lower arches, was the alternative of choice for this treatment, which restored function, providing improved periodontal health, maintained facial esthetics and allowed finishing with a stable and balanced occlusion. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO), as part of the requirements for obtaining the BBO Diplomate title.

[Effect of GABA, sodium glutamate and glycine on evoked potentials in the dental zones of the cerebral cortex].

PubMed

Degtiarev, V P

1979-01-01

Intraventricular administration of gamma-aminobutyric acid (GABA) and glycine decreased, whereas sodium glutamate increased the amplitude of primary responses of dental zones of the somatosensory cortex, which arose during electric stimulation of the pulp of the rabbit upper incisors. No changes in the latent periods were recorded.

Efficiency of piezosurgery technique in miniscrew supported en-masse retraction: a single-centre, randomized controlled trial.

PubMed

Tunçer, Nilüfer Irem; Arman-Özçirpici, Ayça; Oduncuoglu, Bahar Füsun; Göçmen, Jülide Sedef; Kantarci, Alpdogan

2017-11-30

Piezoelectric surgery is a newly introduced technique for rapid tooth movement. However, the efficiency of this technique has not been investigated on en-masse retraction cases yet. To investigate the efficiency of piezosurgery technique in accelerating miniscrew supported en-masse retraction and study the biological tissue response. In addition, to show if this technique induces a difference in dental, skeletal and soft tissue changes on lateral cephalograms, and in canine and molar rotations, besides intercanine and intermolar widths on dental casts. We conducted a randomized, single-centred, parallel-group, controlled trial, requiring upper right and left first premolar extractions on 30 patients above the minimum age of 14 years at the beginning of retraction. Piezosurgery-assisted versus conventional en-masse retraction anchored from miniscrews placed between second premolars and first molars, bilaterally. The main outcome was the en-masse retraction rate. Secondary outcomes were gingival crevicular fluid (GCF) volume and GCF content of receptor activator of nuclear factor κβ ligand (RANKL), changes regarding cephalometric and dental cast variables, and miniscrew success rates. Accomplished with opaque, sealed envelopes. Applicable for data assessment only. Commenced in February 2013 and ended in October 2014. Thirty-one patients were included in the study and divided into 2 groups of piezosurgery (n = 16) and control (n = 15). After 9.3 months of follow-up, no statistically significant difference was observed between groups for neither retraction rates (P = 0.958) nor GCF parameters (P > 0.05). Changes in lateral cephalometric and dental cast variables, and miniscrew success rates did not show significant differences either. Based on the results of this study, piezosurgery technique was found to be ineffective in accelerating en-masse retraction, and promoting a difference in the studied GCF parameters, skeletal and dental variables. The trial was not registered. The full protocol of this PhD thesis study can be accessed from tez.yok.gov.tr. This work was supported by Başkent University Research Fund. No conflict of interest was declared. © The Author 2017. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com

Effect of low-level laser therapy (λ780 nm) on the mechanically damaged dentin-pulp complex in a model of extrusive luxation in rat incisors.

PubMed

de Santana, Dandara Andrade; Fonseca, Gabriela Ferraz; Ramalho, Luciana Maria Pedreira; Rodriguez, Tânia Tavares; Aguiar, Marcio Cajazeira

2017-12-01

In order to regenerate the dental pulp, many strategies have been developed as phototherapy. In the pulp repair, we do not know if gallium-aluminum-arsenide (GaAlAs) laser preserves the primary odontoblasts or stimulates the formation of more dentin matrix when dental pulp is damaged. The aim of the present study was to examine the effect of laser phototherapy (λ780 nm) on vascularization, inflammation, density of the primary odontoblast layer, and formation of reactionary and reparative dentin in the dental pulp by provoking extrusion of the rat incisor. The upper incisors were extruded 3 mm and then repositioned into their original sockets followed by a laser irradiation of the palatal mucosa (λ = 780 nm; p = 70 mW; CW; 4.2 J/cm 2 ; 60 s) every 48 h. Non-traumatized and/or non-irradiated incisors were used as the controls. At 8 and 30 days after surgery, incisors were processed for histological and histomorphometric analysis. Morphological analysis revealed no differences in vascularization between groups, but showed discrete inflammation in some non-irradiated and injured specimens, which correlated with a more irregular reparative dentin. The density of primary odontoblasts in the groups treated with lasers was higher when compared to non-irradiated groups, but no statistically significant difference between groups (p > 0.05). The thickness of the tertiary dentin was increased in both traumatized groups with no statistically significant difference between non-irradiated and irradiated groups (p > 0.05).The present findings revealed that the GaAlAs laser induced small changes on dentin-pulp complex, with more regular dentin matrix in the irradiated dental pulps.

Multiple tooth anomalies in a nonsyndromic patient with class II division 2 malocclusions: A case report and a literature review.

PubMed

Isman, E; Isman, O; Aktan, A M; Ciftci, E; Topcuoglu, T

2015-01-01

Reports in the literature about the craniofacial characteristics of patients with class II division 2 malocclusions show a lot of different patterns accompanied by palatally displaced upper incisors, congenital missing teeth, polydiastema, fusion, germination, tooth impaction, peg-shaped lateral incisors, persistent teeth, hypodontia, persistent deciduous teeth, transpositions, and supernumerary teeth. The following case report focuses on the description of the clinical characteristics observed on a patient with a very unusual conjunction of dental and skeletal anomalies mentioned above, as well as a literature review on the related issues. Extra-intra-oral examinations, radiographic evaluations, orthodontic consultation, and reviewing the literature concluded that this nonsyndromic patient that refused to receive all dental treatment approaches is special with its uniqueness.

Mini-implant-borne Pendulum B appliance for maxillary molar distalisation: design and clinical procedure.

PubMed

Wilmes, Benedict; Katyal, Vandana; Drescher, Dieter

2014-11-01

A treatment objective of upper molar distalisation may often be required during the correction of a malocclusion. Distalisation is not only indicated for the management of Class II patients, but also for Class III surgery patients who require decompensation in the upper arch if upper incisor retrusion is needed. Unfortunately, most conventional intra-oral devices for non-compliance maxillary molar distalisation experience anchorage loss. A Pendulum type of appliance and a mini-implant-borne distalisation mechanism have been designed which can be inserted at chair-side, without a prior laboratory procedure and immediately after mini-implant placement. For re-activation purposes, a distal screw may be added to the Pendulum B appliance.

Comparison of the effects of mini-implant and traditional anchorage on patients with maxillary dentoalveolar protrusion.

PubMed

Xu, Yanhua; Xie, Jiye

2017-03-01

To compare the treatment effects of mini-implants as anchor units with conventional methods of anchorage reinforcement in maxillary dentoalveolar protrusion patients in terms of skeletal, dental, and soft tissue changes. We searched the databases of the Cochrane Library, PubMed, OVIDSP, CBM, VIP, WanFang Data, and CNKI covering December 1966 to March 2016 for randomized controlled trials (RCTs) and clinical controlled trials that compared the treatment effects of mini-implants with conventional anchorage reinforcement in maxillary dentoalveolar protrusion patients. Literature filtering, data extraction, and methodological quality evaluation were finished independently by two researchers and disagreements were solved by discussion. Meta-analysis was performed when possible; otherwise descriptive assessment was done. Through a predefined search strategy, we finally included 14 eligible studies. Eight outcomes were evaluated in this study: maxillary incisor retraction, maxillary molar movement, U1-SN, SNA, SN-MP, UL-E Plane, NLA and G-Sn-Pg. Mini-implant anchorage was more effective in retracting the anterior teeth, produced less anchorage loss, and had a greater effect on SN-MP for the high-angle patients than did traditional anchorage. Both mini-implants and traditional anchorage underwent decreases in on U1-SN and SNA. More qualified RCTs are required to make reliable recommendations about the anchorage capacity of mini-implant and traditional anchorage in patients with maxillary dentoalveolar protrusion, especially on the UL-E plane, NLA, and G-Sn-Pg.

14 CFR 23.1545 - Airspeed indicator.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) The following markings must be made: (1) For the never-exceed speed V NE, a radial red line. (2) For the caution range, a yellow arc extending from the red line specified in paragraph (b)(1) of this... gear and wing flaps retracted, and the upper limit at the maximum structural cruising speed V NO...

Unusual treatment of bimaxillary dentoalveolar protrusion via miniscrews and molar extraction

PubMed Central

Al-Fraidi, Ahmad; Afify, Ahmed R.

2012-01-01

This case report describes the treatment of a Saudi female patient, aged 13 years 8 months at the start of treatment, with a Class I bimaxillary dentoalveolar protrusion and extracted maxillary first molars. Miniscrews were placed bilaterally in the interdental space between both the upper and the lower posterior teeth. The treatment plan consisted of extraction of both lower first permanent molars, distalization of upper and lower premolars using miniscrews followed by en masse retraction of the upper and lower six anterior teeth. The active treatment period was 2 years 8 months. Arch retention was done using upper wrap-around retainer and lower fixed 3-3 retainer. The use of miniscrews helped to resolve the bimaxillary protrusion regardless of extraction pattern used. PMID:24987626

Analysis of the golden proportion and width/height ratios of maxillary anterior dentition in patients with lateral incisor agenesis.

PubMed

Pini, Núbia Pavesi; de-Marchi, Luciana Manzotti; Gribel, Bruno Frazão; Ubaldini, Adriana Lemos Mori; Pascotto, Renata Corrêa

2012-12-01

  The purpose of this study was to assess the presence of the golden proportion (GP) in the facial view tooth-to-tooth width proportion of the six maxillary anterior teeth and to evaluate the width/height (W/H) ratios of the incisors of patients with maxillary lateral incisor (LI) agenesis treated either with implants or orthodontically (by moving canines into the position of the laterals, recontouring them, and placing composite restorations over the repositioned teeth).   Forty-eight patients with LI agenesis were divided into four experimental groups: unilateral recontouring group (N = 10), bilateral recontouring group (BRG, N = 18), unilateral implant group (UIG, N = 10), bilateral implant group (N = 10), and a control group (CG, N = 25) of patients without agenesis. GP ratios were determined on patients' dental casts placed over Levin's grids, whereas W/H ratios were measured directly on the casts and a millimeter ruler to determine these distances. Statistical analysis was performed with Shapiro-Wilk, Kruskal-Wallis, Mann-Whitney, Friedman, and Wilcoxon tests (p < 0.05).   The incidence of GP in the tooth-to-tooth width proportions was significantly different between groups and more commonly found between centrals and laterals than between laterals and canines. The GP was more likely to be observed in the BRG, UIG, and CG. The results demonstrated that the GP was not found to be present in the majority of the cases treated with maxillary agenesis, regardless of the method of treatment. The mean W/H ratios of the laterals ranged between 0.75 and 0.90.   Although the GP may be a useful diagnostic guide, it was not observed in the majority of esthetic outcomes of patients treated with maxillary LI agenesis in this study. The assessment of the golden proportion and width/height ratio of upper anterior teeth in patients with upper lateral incisor agenesis treated with either implants or tooth re-contouring may assist dentists and patients in deciding the best treatment option based on the peculiarities of each case. © 2012 Wiley Periodicals, Inc.

Influence of Preadjusted Bracket Shape and Positioning Reference on Angulation of Upper Central Incisor.

PubMed

Topolski, Francielle; de O Accorsi, Mauricio A; Trevisi, Hugo J; Cuoghi, Osmar A; Moresca, Ricardo

2016-10-01

To verify the influence of different bracket shapes and placement references according to Andrews and MBT systems on the expression of angulation in upper central incisors (UCI). Bracket positioning and mesiodistal dental movement simulations were performed and the angulations produced in the dental crown were evaluated, based on computed tomography scan images of 30 UCI and AutoCAD software analysis. Rectangular (Andrews) and rhomboid (MBT) brackets were placed according to the references recommended by Andrews and MBT systems - long axis of the clinical crown (LACC) and incisal edge (IE) respectively. Data showed that the use of LACC as reference for bracket positioning produced 5° and 4° UCI angulations in Andrews and MBT brackets respectively. The use of IE produced a 1.2° mean angulation in UCI for both brackets. When the LACC was used as reference for bracket positioning, the UCI crown angulation corresponded to the angulation built into the brackets, regardless of shape, while the use of IE resulted in natural crown angulation, regardless of bracket shape. This research contributes to guide the orthodontist in relation to the different treatment techniques based on the use of preadjusted brackets.

Upper airway changes after Xbow appliance therapy evaluated with cone beam computed tomography.

PubMed

Erbas, Banu; Kocadereli, Ilken

2014-07-01

To determine the treatment effects of the Xbow appliance on the upper airway dimensions and volume using cone-beam computed tomography (CBCT); to evaluate the cephalometric changes in the skeletal and dental structures of the skeletal Class II patients. The sample consisted of 25 Class II patients (11 male, 14 female) with a mean age of 11.1 ± 1.1 years. CBCT images were obtained at the beginning of the treatment (T0) and after the debonding of the Xbow (T1). Changes in superior, middle, and inferior parts of the oropharynx in the retroglossal region and changes in the oropharyngeal airway volume were statistically significant (P < .05, P < .01). The differences favoring the Xbow for the changes in the direction of Class II correction included SNA, SNB, ANB, maxillary depth angles, and point A-NPg and Co-B distances. Data of the dental parameters showed palatal tipping and extrusion of the maxillary incisors, labial tipping of the mandibular incisors, and mesial movement and extrusion of the mandibular molars. Treatment with the Xbow appliance in Class II patients resulted in favorable increase in the oropharyngeal airway dimensions and volume. Further studies with larger study samples and with control groups are needed.

The accuracy of image-guided navigation for maxillary positioning in bimaxillary surgery.

PubMed

Sun, Yi; Luebbers, Heinz-Theo; Agbaje, Jimoh Olubanwo; Lambrichts, Ivo; Politis, Constantinus

2014-05-01

The aim of our study was to evaluate the accuracy of image-guided maxillary positioning in sagittal, vertical, and mediolateral direction. Between May 2011 and July 2012, 17 patients (11 males, 6 females) underwent bimaxillary surgery with the use of intraoperative surgical navigation. During Le Fort I osteotomy, the Kolibri navigation system was used to measure movement of the maxilla at the edge of the upper central upper incisor in sagittal (buccal surface), vertical (incisor edge), and mediolateral (dental midline) direction. Six weeks after surgery, a postoperative CBCT scan was taken and registered to the preoperative cone-beam computed tomography scan to identify the actual surgical movement of the maxilla. Student 2-tailed paired t test was used to evaluate differences between the measured result from navigation system and actual surgical movement of the maxilla, which were 0.44 ± 0.35 mm (P = 0.82) in the sagittal, 0.50 ± 0.35 mm (P = 0.85) in the vertical, and 0.56 ± 0.36 mm (P = 0.81) in the mediolateral direction. Our finding demonstrates that intraoperative computer navigation is a promising tool for measuring the surgical change of the maxilla in bimaxillary surgery.

Predictors of favorable soft tissue profile outcomes following Class II Twin-block treatment

PubMed Central

Kim, Ji-Eun; Mah, Su-Jung; Kim, Tae-Woo; Kim, Su-Jung; Park, Ki-Ho

2018-01-01

Objective The aim of this study was to determine cephalometric factors that help predict favorable soft-tissue profile outcomes following treatment with the Class II Twin-block appliance. Methods Pre- and post-treatment lateral cephalograms of 45 patients treated with the Class II Twin-block appliance were retrospectively analyzed. Profile silhouettes were drawn from the cephalograms and evaluated by three orthodontists in order to determine the extent of improvement. Samples were divided into a favorable group (upper 30% of visual analogue scale [VAS] scores, n = 14) and an unfavorable group (lower 30% of VAS scores, n = 14). Skeletal and soft-tissue measurements were performed on the cephalograms and an intergroup comparison was conducted. Results An independent t-test revealed that the following pre-treatment values were lower in the favorable group compared to the unfavorable group: lower incisor to mandibular plane angle, lower incisor to pogonion distance, point A-nasion-point B angle, sella-nasion line (SN) to maxillary plane angle, SN to mandibular plane angle, gonial angle, and symphysis inclination. The favorable group had a larger incisor inclination to occlusal plane. Moreover, the favorable group showed larger post-treatment changes in gonial angle, B point projection, and pogonion projection than did the unfavorable group. Conclusions Class II malocclusion patients with a low divergent skeletal pattern and reduced lower incisor protrusions are likely to show more improvement in soft-tissue profile outcomes following Class II Twin-block treatment. PMID:29291184

Tooth angulation and dental arch perimeter-the effect of orthodontic bracket prescription.

PubMed

Pontes, Luana F; Cecim, Rodolpho L; Machado, Sissy M; Normando, David

2015-08-01

The aim of this study was to evaluate the effects of upper incisors and canine angulations introduced by different bracket prescriptions on dental arch perimeter. Cone beam computerized tomography scans collected using I-Cat (Imaging Sciences International, Hatfield, PA, USA) were selected conveniently from a database of routine exams of a clinical radiology center. Crown and radicular measurements of upper incisors and canines were made and exported to the Autocad 2011 software to create a virtual dental model. The virtual teeth were positioned with an angulation of zero; thereafter, a reference value for the perimeter of the arch was measured. Furthermore, teeth angulations were applied according to the standards of the Edgewise bracket system and the Straight-wire systems: MBT, Capelozza, Andrews, and Roth. The largest linear distances for tooth crown (anterior arch perimeter) and root (radicular distance) were obtained for each bracket prescription. The anterior perimeter for well-aligned incisors and canines without angulation was used as reference (crown: 47.34mm; root: 39.13mm). An increase in the arch perimeter was obtained for all bracket prescriptions evaluated, which ranged from 0.28 and 3.19mm in the Edgewise technique, for the crown and root measurements, respectively, to 1.09 and 11.28mm for the Roth prescription. Bracket prescriptions with greater angulation led to an increased use of space within the dental arch, mainly in the radicular region. The consequence of this radicular angular displacement will need to be further investigated. © The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Space closing versus space opening for bilateral missing upper laterals - aesthetic judgments of laypeople: a web-based survey.

PubMed

Qadri, Salim; Parkin, Nicola A; Benson, Philip E

2016-06-01

To investigate the opinions of laypeople regarding the aesthetic outcome of treating patients with developmental absence of both maxillary lateral incisors using either orthodontic space closure (OSC) or space opening and prosthetic replacement (PR). Cross sectional, web-based survey. A panel of five orthodontists and five restorative dentists examined post-treatment intra-oral images of 21 patients with developmental absence of both upper lateral incisors. A consensus view was obtained about the 10 most attractive images (5 OSC; 5 PR). The 10 selected images were used in a web-based survey involving staff and students at the University of Sheffield. In the first section, the participants were asked to evaluate the attractiveness of the 10 randomly arranged single images using a 5-point Likert scale. In the second section, an image of OSC was paired with an image of PR according to their attractiveness ranking by the clinician panel, and the participants were asked to indicate which of the two images they preferred. The survey received 959 completed responses with 9590 judgements. The images of OSC were perceived to be more attractive (mean rating 3·34 out of 5; SD 0·56) compared with the images of PR (mean rating 3·14 out of 5; SD 0·58) (mean diff 0·21; P < 0·001). Female and staff judges tended to give higher attractiveness ratings. Both females and males preferred the OSC images closing in 3 out of 4 paired images. Space closing was perceived to be more attractive than space opening by lay people. The findings have implications for advising patients about the best aesthetic outcome when both maxillary lateral incisors are missing.

Coordinating bracket torque and incisor inclination : Part 3: Validity of bracket torque values in achieving norm inclinations.

PubMed

Zimmer, Bernd; Sino, Hiba

2018-03-19

To analyze common values of bracket torque (Andrews, Roth, MBT, Ricketts) for their validity in achieving incisor inclinations that are considered normal by different cephalometric standards. Using the equations developed in part 1 (eU1 (BOP) = 90° - BT (U1) - TCA (U1) + α 1 - α 2 and eL1 (BOP) = 90° - BT (L1) - TCA (L1) + β 1 - β 2 ) (abbreviations see part 1) and the mean values (± SD) obtained as statistical measures in parts 1 and 2 of the study (α 1 and β 1 [1.7° ± 0.7°], α 2 [3.6° ± 0.3°], β 2 [3.2° ± 0.4°], TCA (U1) [24.6° ± 3.6°] and TCA (L1) [22.9° ± 4.3°]) expected (= theoretically anticipated) values were calculated for upper and lower incisors (U1 and L1) and compared to targeted (= cephalometric norm) values. For U1, there was no overlapping between the ranges of expected and targeted values, as the lowest targeted value of (58.3°; Ricketts) was higher than the highest expected value (56.5°; Andrews) relative to the bisected occlusal plane (BOP). Thus all of these torque systems will aim for flatter inclinations than prescribed by any of the norm values. Depending on target values, the various bracket systems fell short by 1.8-5.5° (Andrews), 6.8-10.5° (Roth), 11.8-15.5° (MBT), or 16.8-20.5° (Ricketts). For L1, there was good agreement of the MBT system with the Ricketts and Björk target values (Δ0.1° and Δ-0.8°, respectively), and both the Roth and Ricketts systems came close to the Bergen target value (both Δ2.3°). Depending on target values, the ranges of deviation for L1 were 6.3-13.2° for Andrews (Class II prescription), 2.3°-9.2° for Roth, -3.7 to -3.2° for MBT, and 2.3-9.2° for Ricketts. Common values of upper incisor bracket torque do not have acceptable validity in achieving normal incisor inclinations. A careful selection of lower bracket torque may provide satisfactory matching with some of the targeted norm values.

Regenerative Endodontic Treatment versus Apical Plug in Immature Teeth: Three-Year Follow-Up.

PubMed

Asgary, Saeed; Fazlyab, Mahta; Nosrat, Ali

This report compares and evaluates the treatment outcomes of regenerative endodontic treatment and apical plug as two accepted treatment protocols in a pair of necrotic immature maxillary central incisors of a 12-year old female. The patient was referred complaining of a dull pain and swelling in her upper lip area. She had a history of trauma to the anterior maxilla two years earlier. Both teeth were clinically diagnosed with pulp necrosis and periapical radiographs revealed that separate periapical radiolucent lesions surrounded the immature apices of both teeth. The left and right incisors were treated with apical plug and regenerative endodontic treatment, respectively, using calcium-enriched mixture (CEM) cement. The patient was followed-up for three years. During this period, both teeth were clinically asymptomatic and showed complete radiographic healing of the periapical lesions. The right central incisor showed root development. No tooth discoloration was evident. Apexification by apical plug placement and pulp regeneration are both reliable treatments for immature non-vital teeth. In order to choose the right treatment the advantages of either technique should be weighed against its drawbacks. CEM cement can be successfully applied for both purposes. This biomaterial causes less discoloration of the tooth.

Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens.

PubMed

Sidiq, Mohsin; Yousuf, Asif; Bhat, Manohar; Sharma, Rajesh; Bhargava, Neha; Ganta, Shravani

2015-01-01

The aim of this case study was to report a potentially convenient approach instead of a conventional orthodontic procedure for correcting severe rotation of anterior tooth of an 11-year-old Indian boy, with a mixed dentition class I malocclusion. The child reported seeking treatment for severely rotated upper right central incisor with mesiodens and a single tooth crossbite. The supernumerary tooth was first extracted and bondable buttons were placed on the rotated tooth, an appliance composed of a removable plate with Adam's clasp with distal extension and a loop for engagement of elastics was delivered. Circumferential supracrestal fibrotomy was performed on the corrected derotated tooth. Then, Hawley's appliance with a z-spring and posterior bite plane was fabricated and placed for correction of crossbite. Thus, this removable appliance can be a simplified and a cost-effective treatment alternative for derotation of anterior tooth, especially during the mixed dentition period. How to cite this article: Sidiq M, Yousuf A, Bhat M, Sharma R, Bhargava N, Ganta S. Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens. Int J Clin Pediatr Dent 2015;8(3):234-238.

[Autotransplantation of a maxillary incisor and orthodontic care: a case study].

PubMed

Charpentier, Valentine; Makaremi, Masrour; Brondeau, François de

2017-12-01

Severely impacted teeth with atypical root anatomy do not respond well to orthodontic traction after surgical exposure. Consequently, they are often removed, but replacing them with dental prostheses can prove difficult in patients who are still growing. Thus, autotransplantation seems to be the only way to preserve a natural tooth and the alveolar bone. An upper central incisor impacted in the region of the nasal cavities with an open apex was diagnosed in an 8.5-year-old female patient. The tooth displayed a curved root pressed against the maxillary cortical bone preventing orthodontic traction treatment. Through this clinical case involving autotransplantation of a maxillary incisor report and a review of the literature, this article explores the indications and exposes the different stages of this orthodontic-surgical protocol. In this case, autotransplantation enabled restoration of maxillary arch continuity. After two years of orthodontic treatment, the bone reconstruction of the extraction site was very satisfactory. The benefits of this technique and the precautions to be taken are discussed as well as the various protocols. The increasing success rate of this surgical procedure makes it possible to consider it as a protocol for the future. © EDP Sciences, SFODF, 2017.

Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens

PubMed Central

Sidiq, Mohsin; Bhat, Manohar; Sharma, Rajesh; Bhargava, Neha; Ganta, Shravani

2015-01-01

ABSTRACT The aim of this case study was to report a potentially convenient approach instead of a conventional orthodontic procedure for correcting severe rotation of anterior tooth of an 11-year-old Indian boy, with a mixed dentition class I malocclusion. The child reported seeking treatment for severely rotated upper right central incisor with mesiodens and a single tooth crossbite. The supernumerary tooth was first extracted and bondable buttons were placed on the rotated tooth, an appliance composed of a removable plate with Adam’s clasp with distal extension and a loop for engagement of elastics was delivered. Circumferential supracrestal fibrotomy was performed on the corrected derotated tooth. Then, Hawley’s appliance with a z-spring and posterior bite plane was fabricated and placed for correction of crossbite. Thus, this removable appliance can be a simplified and a cost-effective treatment alternative for derotation of anterior tooth, especially during the mixed dentition period. How to cite this article: Sidiq M, Yousuf A, Bhat M, Sharma R, Bhargava N, Ganta S. Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens. Int J Clin Pediatr Dent 2015;8(3):234-238. PMID:26604544

Lightweight extendable and retractable pole

DOEpatents

Warren, John L.; Brandt, James E.

1994-01-01

A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole.

Lightweight extendable and retractable pole

DOEpatents

Warren, J.L.; Brandt, J.E.

1994-08-02

A lightweight extendable and retractable telescopic pole is disclosed comprising a plurality of non-metallic telescoping cylinders with sliding and sealing surfaces between the cylinders, a first plug member on the upper end of the smallest cylinder, and a second plug member on the lower end of the largest cylinder, whereby fluid pressure admitted to the largest cylinder will cause the telescoping cylinders to slide relative to one another causing the pole to extend. An elastomeric member connects the first plug member with one of the intermediate cylinders to urge the cylinders back into a collapsed position when the fluid pressure in the cylinders is vented. Annular elastomer members are provided which seal one cylinder to another when the pole is fully extended and further serve to provide a cushion to prevent damage to the cylinders when the pole is urged back into its retractable position by the elastomeric members and the venting of the pressure. A value mechanism associated with the pole is provided to admit a fluid under pressure to the interior of the telescoping cylinders of the pole while pressurizing a pressure relief port having an opening larger than the inlet port in a closed position whereby removal of the pressure on the relief port will cause the relief port to open to quickly lower the pressure in the interior of the telescoping cylinders to thereby assist in the rapid retraction of the extended pole. 18 figs.

Computational modeling and prototyping of a pediatric airway management instrument.

PubMed

Gonzalez-Cota, Alan; Kruger, Grant H; Raghavan, Padmaja; Reynolds, Paul I

2010-09-01

Anterior retraction of the tongue is used to enhance upper airway patency during pediatric fiberoptic intubation. This can be achieved by the use of Magill forceps as a tongue retractor, but lingual grip can become unsteady and traumatic. Our objective was to modify this instrument using computer-aided engineering for the purpose of stable tongue retraction. We analyzed the geometry and mechanical properties of standard Magill forceps with a combination of analytical and empirical methods. This design was captured using computer-aided design techniques to obtain a 3-dimensional model allowing further geometric refinements and mathematical testing for rapid prototyping. On the basis of our experimental findings we adjusted the design constraints to optimize the device for tongue retraction. Stereolithography prototyping was used to create a partially functional plastic model to further assess the functional and ergonomic effectiveness of the design changes. To reduce pressure on the tongue by regular Magill forceps, we incorporated (1) a larger diameter tip for better lingual tissue pressure profile, (2) a ratchet to stabilize such pressure, and (3) a soft molded tip with roughened surface to improve grip. Computer-aided engineering can be used to redesign and prototype a popular instrument used in airway management. On a computational model, our modified Magill forceps demonstrated stable retraction forces, while maintaining the original geometry and versatility. Its application in humans and utility during pediatric fiberoptic intubation are yet to be studied.

Endosonographic examination of thyroid gland among patients with nonthyroid cancers.

PubMed

Alkhatib, Amer A; Mahayni, Abdulah A; Chawki, Ghaleb R; Yoder, Leon; Elkhatib, Fateh A; Al-Haddad, Mohammad

2016-01-01

There is limited endosonographic literature regarding thyroid gland pathology, which is frequently visualized during upper endoscopic ultrasound (EUS). Our objective was to assess the prevalence of benign and malignant thyroid lesions encountered during routine upper EUS within a cancer center setting. The data were prospectively collected and retrospectively analyzed. All upper EUS procedures performed between October 2012 and July 2014 were reviewed at a large referral cancer center. Data collected included patient demographics, preexisting thyroid conditions, thyroid gland dimensions, the presence or absence of thyroid lesions, and EUS morphology of lesions if present, and interventions performed to characterize thyroid lesions and pathology results when applicable. Two hundred and forty-five EUS procedures were reviewed. Of these, 100 cases reported a detailed endosonographic examination of the thyroid gland. Most of the thyroid glands were endosonographically visualized when the tip of the scope was at 18 cm from the incisors. Twelve cases showed thyroid lesions, out of which three previously undiagnosed thyroid cancers were visualized during EUS (two primary papillary thyroid cancers and one anaplastic thyroid cancer). Transesophageal EUS-guided fine needle aspiration of thyroid lesions was feasible when the lesion was in the inferior portion of the thyroid gland, and the tip of the scope was at 18 cm or more from the incisors. Routine EUS examination may detect unexpected thyroid lesions including malignant ones. We encourage endosonographers to screen the visualized portions of the thyroid gland during routine withdrawal of the echoendoscope.

Influence of neck postural changes on cervical spine motion and angle during swallowing

PubMed Central

Kim, Jun Young; Hong, Jae Taek; Oh, Joo Seon; Jain, Ashish; Kim, Il Sup; Lim, Seong Hoon; Kim, Jun Sung

2017-01-01

Abstract Occipitocervical (OC) fixation in a neck retraction position could be dangerous due to the risk of postoperative dysphagia. No previous study has demonstrated an association between the cervical posture change and cervical spine motion/angle during swallowing. So, we aimed to analyze the influence of neck posture on the cervical spine motion and angle change during swallowing. Thirty-seven asymptomatic volunteers were recruited for participation this study. A videoflurographic swallowing study was performed in the neutral and retracted neck posture. We analyzed the images of the oral and pharyngeal phases of swallowing and compared the angle and the position changes of each cervical segment. In the neutral posture, C1 and C2 were flexed, while C5, C6, and C7 were extended. C3, C4, C5, C6, and C7 moved posteriorly. All cervical levels, except for C5, moved superiorly. In the retraction posture, C0 and C1 were flexed, while C6 was extended during swallowing. All cervical levels moved posteriorly. C1, C2, C3, and C4 moved superiorly. The comparison between 2 postures shows that angle change is significantly different between C0, C2, and C5. Posterior translation change is significantly different in the upper cervical spine (C0, C1, and C2) and C7. Superior movement is significantly different in C0. C0 segment is most significantly different between neutral and retraction posture in terms of angle and position change. These data suggest that C0 segment could be a critical level of compensation that allows swallowing even in the retraction neck posture regarding motion and angle change. So, it is important not to do OC fixation in retraction posture. Also, sparing C0 segment could provide some degree of freedom for the compensatory movement and angle change to avoid dysphagia after OC fixation. PMID:29137075

Comparison of ropivacaine and lidocaine with epinephrine for infiltration anesthesia in dentistry. A randomized study.

PubMed

Krzemiński, Tadeusz Faustyn; Gilowski, Łukasz; Wiench, Rafał; Płocica, Iwona; Kondzielnik, Piotr; Sielańczyk, Andrzej

2011-10-01

To compare the efficacy of maxillary infiltration anesthesia with 0.5% plain ropivacaine or 2% lidocaine with epinephrine 1:100,000. 60 volunteers received 1.8 ml of the anesthetic for infiltration anesthesia of maxillary central and lateral incisors and canine teeth. The onset time and duration of pulp anesthesia were assessed with an electric pulp tester. The duration time of numbness of the upper lip was also monitored. Blood pressure and heart rate were measured before and after administration of the solution. The efficacy of anesthesia of the lateral and central incisors was 100% for both anesthetics. There were small insignificant differences in effectiveness of canine pulp anesthesia. The mean onset time was significantly shorter for ropivacaine--2.2 minutes vs. 5.1 for lidocaine. Ropivacaine also had a significantly longer duration of action--mean time 79.2 minutes. Ropivacaine caused statistically significant increases in blood pressure and heart rate.

Lingual orthodontics and forced eruption: a means for osseous and tissue regeneration.

PubMed

Paolone, Maria Giacinta; Kaitsas, Roberto; Paolone, Gaetano; Kaitsas, Vassilios

2008-01-01

An hopeless upper central incisor was subjected to forced eruption in order to improve and develop the implant site by distraction of the periodontal ligament-alveolar bone complex. The orthodontic extrusion was carried out with two aesthetic approaches: lingual orthodontics and a composite resin 2-2 veneer pontic. The first part of the extrusion was realized with lingual orthodontics alone, then, when the crown had been remodelled in its greatest part and the aesthetics was no more acceptable to the patient a composite resin 2-2 veneer pontic was bonded to the vestibular side of the other three incisors to mimetise the extruded tooth and to be anchorage to the lingual mechanics. The orthodontic preparation of the implant site allowed the correction of the periodontal defect due to the fracture, the enhancement of the alveolar bone and the soft tissue remodelling.

[Nonsurgical retreatment of lateral radiopacity after surgical treatment].

PubMed

Arias de Luxan, A

1990-01-01

A case report is presented of an upper central incisor with incomplete endodontic procedure evidencing a radiolucent image that was treated by apicoectomy and retroamalgam. A year later the periapical lesion had healed completely but a new lateral radiolucency is observed. A reentry of the canal is performed eliminating the old obturating material, biomechanical preparation and obturation with sealer and thermo gutta-percha. The lesion was cured in nine months.

Impact of diet on incisor growth and attrition and the development of dental disease in pet rabbits.

PubMed

Meredith, A L; Prebble, J L; Shaw, D J

2015-06-01

To assess the impact of four rabbit diets (hay only; extruded diet with hay; muesli with hay; muesli only) on length and curvature of cheek teeth and eruption and attrition rates of incisors. Thirty-two Dutch rabbits, randomly divided into four diet groups, had length and saggital plane curvature of the first cheek teeth measured radiographically at 1, 9 and 17 months. Eruption/attrition of the left upper incisor was directly measured at weeks 30, 32 and 35. Eruption rates matched attrition rates in all groups, but were higher in the hay only group than in both groups fed muesli. By month 9, a greater degree of tooth curvature was present in rabbits fed muesli only than in those fed hay only and extruded diet with hay. After 17 months, rabbits fed muesli only and muesli with hay had longer lower first cheek teeth and larger interdental spaces between the first two molars than rabbits fed extruded diet and hay and hay only. Three rabbits fed muesli only developed evidence of dental disease. Presence of increased tooth length, curvature and interdental spaces indicated early dental pathology in rabbits fed muesli. Muesli diets cannot be recommended for pet rabbits. © 2015 British Small Animal Veterinary Association.

Comparison of temporary anchorage devices and transpalatal arch-mediated anchorage reinforcement during canine retraction

PubMed Central

Kecik, Defne

2016-01-01

Objective: The purpose of this study was to compare the dental and skeletal effects of canine retraction using conventional anchorage reinforcement systems and comparing them with the usage of TADs. Materials and Methods: The sample consisted of 50 patients having Class I malocclusions with bimaxillary protrusion indicated for first premolar extraction, and allocated into two groups. The first group consisted of 25 patients with a mean age of 18,7 years (min:14, max:22 years, 16 girls and 9 boys) that TADs were applied as an anchorage mechanic between attached gingiva of upper second premolar and first molar teeth. The second group consisted of 25 patients with a mean age of 19,4 years (min:15, max:23 years, 14 girls and 11 boys) that conventional molar anchorage with Transpalatal arch (TPA) was applied for the anchorage mechanics against canine retraction. Results: The results showed that mean mesial movement and the tipping of the first molars in TAD group between T0 - T1 were insignificant (P > 0,05), however in the TPA group were significant (P<0,01). Vertical movement of the molars were not significant when two groups were compared (P>0,05). Conclusion: Although TPA is a useful appliance, it doesn't provide an effective anchorage control on anteroposterior movement maxillary first molar teeth concerning first premolar extraction treatment. TADs are more convenient to provide absolute anchorage during maxillary canine retraction in contrast to transpalatal arch. PMID:28042267

Comparison of temporary anchorage devices and transpalatal arch-mediated anchorage reinforcement during canine retraction.

PubMed

Kecik, Defne

2016-01-01

The purpose of this study was to compare the dental and skeletal effects of canine retraction using conventional anchorage reinforcement systems and comparing them with the usage of TADs. The sample consisted of 50 patients having Class I malocclusions with bimaxillary protrusion indicated for first premolar extraction, and allocated into two groups. The first group consisted of 25 patients with a mean age of 18,7 years (min:14, max:22 years, 16 girls and 9 boys) that TADs were applied as an anchorage mechanic between attached gingiva of upper second premolar and first molar teeth. The second group consisted of 25 patients with a mean age of 19,4 years (min:15, max:23 years, 14 girls and 11 boys) that conventional molar anchorage with Transpalatal arch (TPA) was applied for the anchorage mechanics against canine retraction. The results showed that mean mesial movement and the tipping of the first molars in TAD group between T0 - T1 were insignificant ( P > 0,05), however in the TPA group were significant ( P <0,01). Vertical movement of the molars were not significant when two groups were compared ( P >0,05). Although TPA is a useful appliance, it doesn't provide an effective anchorage control on anteroposterior movement maxillary first molar teeth concerning first premolar extraction treatment. TADs are more convenient to provide absolute anchorage during maxillary canine retraction in contrast to transpalatal arch.

Dental implants placement in paranoid squizofrenic patient with obsessive-compulsive disorder: A case report

PubMed Central

Castellanos-Cosano, Lizett; Corcuera-Flores, José-Ramón; Mesa-Cabrera, María; Cabrera-Domínguez, José; Torres-Lagares, Daniel; Machuca-Portillo, Guillermo

2017-01-01

Background Paranoid schizophrenia is a mental illness that involves no observable anatomical alteration. Main characteristic affects the personality of the individual, as well as areas of his own psychology. Case Report A 33-year-old man with paranoid schizophrenia and obsessive-compulsive disorder in treatment with Haloperidol, Oxcarbazepine, Olanzapine and Seroquel is presented. Dental exploration showed widespread decay mostly cervical with numerous root fragments, agenesis of lateral incisors, impacted wisdom teeth, missing teeth and malocclusion. Treatment plan included restoration of teeth decay, extractions of root fragments and implant-supported prostheses in bilateral upper lateral incisors for aesthetics reason. A previous consultation with a psychiatric specialist was performed and no contraindication were observed. A preliminary radiological examination was performed previous dental treatment and implant placement. Due to patient refusal to replace dental abscenses with implants, inform consent was signed up from his parents. After local anesthesia, first implant was placed at upper right lateral positions (Straumann Bone Level Ø 3.3 mm, length 10 mm). Two weeks later a second implant was placed at upper left lateral position (Straumann Bone Level Ø 3.3 mm, length 12 mm). The patient showed no postoperative complications. After implant placement, the patient attended scheduled review appointments. The prosthesis was placed after a 3-month period of osseointegration. Conclusions Implant placement can be considered a suitable option for people with mental disorders. A previous consultation with psychiatric specialists for conducting a good patient management is necessaire. Key words:Paranoid schizophrenia, obsessive-compulsive disorder, dental implants. PMID:29302292

Reversible Solid Adhesion for Defense Applications

DTIC Science & Technology

2008-01-31

sensitive. Referring to Fig. 2(a), using the two closed-loop piezoelectric ( PZT ) actuators, the vertical and horizontal velocities of the...approaching/retracting contacting surfaces can be independently controlled. The displacement resolution of the vertical PZT actuator is 0.6 nm, and the total...interfacial forces are measured using the prototype custom-made capacity-type force transducer which is attached directly on the upper PZT actuator. In order

A comparative study of the effect of the intrusion arch and straight wire mechanics on incisor root resorption: A randomized, controlled trial.

PubMed

de Almeida, Marcio Rodrigues; Marçal, Aline Siqueira Butzke; Fernandes, Thais Maria Freire; Vasconcelos, Juliana Brito; de Almeida, Renato Rodrigues; Nanda, Ravindra

2018-01-01

To analyze and compare external apical root resorption (EARR) of maxillary incisors treated by intrusion arch or continuous archwire mechanics. This cone-beam computed tomography (CBCT) study analyzed 28 deep bite patients in the permanent dentition who were randomly divided into two groups: Group 1, 12 patients with initial mean age of 15.1 ± 1.6 years and mean overbite of 4.6 ± 1.2 mm treated with the Connecticut intrusion arch (CIA) in the upper arch (Ortho Organizers, Carlsbad, Calif) for a mean period of 5.8 ± 1.27 months. Group 2, 16 patients with initial mean age of 22.1 ± 5.7 years and mean overbite of 4.1 ± 1.1 mm treated with conventional leveling and alignment using continuous archwire mechanics for 6.1 ± 0.81 months. The degree of EARR was detected in 112 maxillary incisors by using CBCT scans and a three-dimensional program (Dolphin 11.7, Dolphin Imaging & Management Solutions, Chatsworth, Calif). The CBCT scans were obtained before (T1) and 6 months after initiation of treatment (T2). Differences between and within groups were assessed by nonpaired and paired t-tests, respectively, with a 5% significance level. Significant differences were found for both groups between T1 and T2 ( P < .05) indicating that EARR occurred in both groups. However, there were no significant differences when EARR was compared between group 1 (-0.76 mm) and group 2 (-0.59 mm). The Connecticut intrusion arch did not lead to greater EARR of maxillary incisors when compared with conventional orthodontic mechanics.

Canines are affected in 16-year-olds with molar-incisor hypomineralisation (MIH): an epidemiological study based on the Tromsø study: "Fit Futures".

PubMed

Schmalfuss, A; Stenhagen, K R; Tveit, A B; Crossner, C-G; Espelid, I

2016-04-01

This was to determine the prevalence, distribution of affected teeth and severity of MIH in adolescents from Northern Norway. It was part of a cross-sectional health survey Fit Futures including 16-year-olds from two neighbouring municipalities, Tromsø and Balsfjord. The prevalence of MIH was 13.9% (110 of 794). The maxillary first permanent molars (FPMs) were 1.6 times more frequently affected than in the mandible (P < 0.001). The FPMs on the right side were 1.2 times more often affected than the FPMs on the left side (P = 0.038). The maxillary incisors were 2.5 times more often affected than the incisors in the mandible (P < 0.001). The proportions of participants whose canines and incisors were involved were 22.8 and 41.8%, respectively. Altogether 201 FPMs were affected; 54.0% of these had opacities only, 24.3% had posteruptive breakdown (PEB), 18.8% had atypical restorations, and 3.0% had been extracted due to MIH. The buccal surfaces were most often affected in FPMs. More severe lesions were found in the mandibular FPMs compared with the maxillary FPMs (P = 0.002). In the lower canines, only opacities were recorded, while in the upper jaw 13.0% of the affected canines showed PEBs. The distribution of MIH in the dentition was not symmetrical. The prevalence of MIH (13.9%) in the study population of 16-year-olds from Northern Norway is consistent with previous Scandinavian reports. The distribution pattern shows that one participant in four with MIH had at least one affected canine. Further studies are needed to describe the localisation of defects on the enamel surface and to relate these findings to enamel thickness and the duration of amelogenesis.

Prevalence of shovel-shaped incisors in Saudi Arabian dental patients.

PubMed

Saini, T S; Kharat, D U; Mokeem, S

1990-10-01

The prevalence of maxillary incisor shoveling was studied radiographically in 990 Saudi patients. According to the radiomorphologic characteristics, a new classification was developed and shovel teeth were categorized. The findings of this study showed 9% shovel-shaped incisors; among those, 4% were central incisors and 5% were lateral incisors. Frequency of dens invaginatus occurrence with the shovel-shaped incisors was also investigated. Eight percent of shovel-shaped incisors showed presence of dens invaginatus. Prevalence was found to be 4% in central shovel-shaped incisors, whereas that in lateral shovel-shaped incisors was 11%.

Stable region for maxillary dental cast superimposition in adults, studied with the aid of stable miniscrews.

PubMed

Chen, G; Chen, S; Zhang, X Y; Jiang, R P; Liu, Y; Shi, F H; Xu, T M

2011-05-01

To identify a stable and reproducible reference region to superimpose serial maxillary dental models in adult extraction cases. Fifteen adult volunteers were enrolled. To reduce protrusion, bilateral maxillary first premolars were extracted in all volunteers. Each volunteer received six miniscrews, including two loaded miniscrews used to retract anterior teeth and four unloaded miniscrews. Impressions for maxillary models were taken at T1 (1 week after miniscrew placement) and T2 (17 months later). Dental models were created and then scanned using a laser scanner. Stability of the miniscrews was evaluated, and dental models were registered using stationary miniscrews. The palatal region, where deviation was within 0.5 mm in all subjects, was determined to be the stable region. Reproducibility of the new palatal region for 3D digital model superimposition was evaluated. Deviation of the medial 2/3 of the palatal region between the third rugae and the line in contact with the distal surface of the bilateral maxillary first molars was within 0.5 mm. Tooth movement of 15 subjects was measured to evaluate the validity of the new 3D superimposition method. Displacements were 8.18 ± 2.94 mm (central incisor) and 2.25 ± 0.73 mm (first molar) measured by miniscrew superimposition, while values of 7.81 ± 2.53 mm (central incisor) and 2.29 ± 1.03 mm (first molar) were measured using the 3D palatal vault regional superimposition method; no significant difference was observed. The medial 2/3 of the third rugae and the regional palatal vault dorsal to it is a stable region to register 3D digital models for evaluation of orthodontic tooth movement in adult patients. © 2011 John Wiley & Sons A/S.

Incisor crown bending strength correlates with diet and incisor curvature in anthropoid primates.

PubMed

Deane, Andrew S

2015-02-01

Anthropoid incisors are large relative to the postcanine dentition and function in the preprocessing of food items. Previous analyses of anthropoid incisor allometry and shape demonstrate that incisor morphology is correlated with preferred foods and that more frugivorous anthropoids have larger and more curved incisors. Although the relationship between incisal crown curvature and preferred foods has been well documented in extant and fossil anthropoids, the functional significance of curvature variation has yet to be conclusively established. Given that an increase in crown curvature will increase maximum linear crown dimensions, and bending resistance is a function of linear crown dimensions, it is hypothesized that incisor crown curvature functons to increase incisor crown resistance to bending forces. This study uses beam theory to calculate the mesiodistal and labiolingual bending strengths of the maxillary and mandibular incisors of hominoid and platyrrhine taxa with differing diets and variable degrees of incisal curvature. Results indicate that bending strength correlates with incisal curvature and that frugivores have elevated incisor bending resistance relative to folivores. Maxillary central incisor bending strengths further discriminate platyrrhine and hominoid hard- and soft-object frugivores suggesting this crown is subjected to elevated occlusal loading relative to other incisors. These results are consistent with the hypothesis that incisor crown curvature functions to increase incisor crown resistance to bending forces but does not preclude the possibility that incisor bending strength is a composite function of multiple dentognathic variables including, but not limited to, incisor crown curvature. © 2014 Wiley Periodicals, Inc.

Investigation of the Human Response to Upper Torso Retraction with Weighted Helmets

DTIC Science & Technology

2013-09-01

coverage of each test. The Kodak system is capable of recording high-speed motion up to a rate of 1000 frames per second. For this study , the video...the measured center-of-gravity (CG) of the worst- case test helmet fell outside the current limits and no injuries were observed, it can be stated...8 Figure 7. T-test Cases 1-9 (0 lb Added Helmet Weight

Installation and assembly device and method of using

DOEpatents

Kolsun, George J.

1997-01-01

An installation and assembly device for aligning a first member such as a pump impeller with a second member such as an inlet nozzle of an impeller pump. The installation and assembly device includes a sleeve slideable within the inlet nozzle and a vertical positioning assembly which has a contact member that is extendable out away from the sleeve so as to vertically position the sleeve on a shoulder of the inlet nozzle and to present an upper contact surface spaced a certain distance from the shoulder to provide the desired vertical spacing with respect to the impeller contacting the upper contact surface. The vertical positioning assembly is retractable so as to allow for removal of the sleeve through the nozzle when installation and assembly are completed. The alignment device also includes a radial alignment assembly supported by the sleeve and adjustable to an expanded state for contacting and spacing the interior surface of the impeller a certain distance from the sleeve and hence a certain distance from the inlet nozzle. The radial alignment device being adjustable from a retracted removal state to an expanded state and also being adjustable to fine tune the spacing of the impeller from the sleeve. The radial alignment device also preferably includes members that can be used to releasably secure the sleeve to the impeller.

Shear bond strength and enamel fracture behavior of ceramic brackets Fascination® and Fascination®2.

PubMed

Gittner, Robert; Müller-Hartwich, Ralf; Engel, Sylvia; Jost-Brinkmann, Paul-Georg

2012-01-01

The purpose of this study was to compare the shear bond strength and incidence of enamel fractures of the ceramic brackets Fascination® and Fascination®2. A total of 360 teeth (180 first upper bicuspids and 180 lower incisors) were stored in 96% ethanol, while 360 other teeth (180 first upper bicuspids and 180 lower incisors) were stored in 0.1% thymol. All 720 teeth were bonded one-half each with Fascination® and Fascination®2 brackets using three different adhesives and three different light curing units. The teeth were debonded with a debonding-device according to DIN EN ISO 10477 using a universal testing machine with a crosshead speed of 1 mm per minute. The enamel surface was then examined stereomicroscopically (10x and 40x magnification). The non-parametric Mann-Whitney U test was used, since the data were not normally distributed. The Fascination®2 brackets provided significantly lower shear bond strength than Fascination® brackets (p = 0.003). Fascination® brackets demonstrated significantly fewer, smaller enamel fractures than Fascination®2 brackets (p = 0.012). The lower shear bond strength of the Fascination®2 brackets is clinically acceptable, but our study's experimental design did not enable us to prove whether this is clinically associated with a lower risk of enamel fracture.

Camouflage treatment of severe bialveolar protrusion in skeletal Class II using miniscrew anchorage.

PubMed

Suzuki, Selly Sayuri; Previdente, Luiz Henrique; Garcez, Aguinaldo Silva; Suzuki, Hideo

2013-01-01

The aim of this case report was to demonstrate the efficient use of miniscrew as anchorage in a 12-year-old male patient with skeletal and dental Class II and severe biprotrusion and lips procumbency. It was proposed a compensating orthodontic treatment with 4 premolar extraction and maximum anchorage. Since the patient abandoned treatment after one premolar extraction, loss of anchorage occurred and treatment plan was modified to maximize lower retraction with miniscrew anchorage and distalization of the upper arch using two methods: Class II elastics from lower miniscrews to the sliding jig and modified transpalatal arch using palatal miniscrew. The results showed a significant improvement of his facial appearance, lip protrusion and also dental esthetics and function. It was concluded that miniscrews can provide absolute anchorage for maximum anterior retraction in order to correct dentoalveolar biprotrusion in the presence of limited thickness alveolar bone.

A Contractile Network of Interstitial Cells of Cajal in the Supratarsal Mueller's Smooth Muscle Fibers With Sparse Sympathetic Innervation

PubMed Central

Yuzuriha, Shunsuke; Matsuo, Kiyoshi; Ban, Ryokuya; Yano, Shiharu; Moriizumi, Tetsuji

2012-01-01

Background: We previously reported that the supratarsal Mueller's muscle is innervated by both sympathetic efferent fibers and trigeminal proprioceptive afferent fibers, which function as mechanoreceptors-inducing reflexive contractions of both the levator and frontalis muscles. Controversy still persists regarding the role of the mechanoreceptors in Mueller's muscle; therefore, we clinically and histologically investigated Mueller's muscle. Methods: We evaluated the role of phenylephrine administration into the upper fornix in contraction of Mueller's smooth muscle fibers and how intraoperative stretching of Mueller's muscle alters the degree of eyelid retraction in 20 patients with aponeurotic blepharoptosis. In addition, we stained Mueller's muscle in 7 cadavers with antibodies against α-smooth muscle actin, S100, tyrosine hydroxylase, c-kit, and connexin 43. Results: Maximal eyelid retraction occurred approximately 3.8 minutes after administration of phenylephrine and prolonged eyelid retraction for at least 20 minutes after administration. Intraoperative stretching of Mueller's muscle increased eyelid retraction due to its reflexive contraction. The tyrosine hydroxylase antibody sparsely stained postganglionic sympathetic nerve fibers, whereas the S100 and c-kit antibodies densely stained the interstitial cells of Cajal (ICCs) among Mueller's smooth muscle fibers. A connexin 43 antibody failed to stain Mueller's muscle. Conclusions: A contractile network of ICCs may mediate neurotransmission within Mueller's multiunit smooth muscle fibers that are sparsely innervated by postganglionic sympathetic fibers. Interstitial cells of Cajal may also serve as mechanoreceptors that reflexively contract Mueller's smooth muscle fibers, forming intimate associations with intramuscular trigeminal proprioceptive fibers to induce reflexive contraction of the levator and frontalis muscles. PMID:22359687

Dental stigmata and enamel thickness in a probable case of congenital syphilis from XVI century Croatia.

PubMed

Lauc, Tomislav; Fornai, Cinzia; Premužić, Zrinka; Vodanović, Marin; Weber, Gerhard W; Mašić, Boris; Rajić Šikanjić, Petra

2015-10-01

To analyse the dental remains of an individual with signs of congenital syphilis by using macroscopic observation, CBCT and micro-CT images, and the analysis of the enamel thickness. Anthropological analysis of human skeletal remains from the 16th century archaeological site Park Grič in Zagreb, Croatia discovered a female, 17-20 years old at the time of death, with dental signs supportive of congenital syphilis: mulberry molars and canine defects, as well as non-specific hypoplastic changes on incisors. The focus of the analysis was on three aspects: gross morphology, hypoplastic defects of the molars, canines and incisors, as well as enamel thickness of the upper first and second molars. The observed morphology of the first molars corresponds to the typical aspect of mulberry molars, while that of the canines is characterised by hypomineralisation. Hypoplastic grooves were observed on the incisal edges of all incisors. The enamel of the first molars is underdeveloped while in the second molars a thick-enamelled condition is observed. Our observations for the dental and skeletal evidence are supportive to a diagnosis of congenital syphilis for this specimen from XVI century Croatia. The use of CT imaging helped documenting the diagnostic features and quantifying the effect of the dental stigmata on first molars. Copyright © 2015 Elsevier Ltd. All rights reserved.

Perception of Saudi dentists and lay people to altered smile esthetics.

PubMed

Talic, Nabeel; Alomar, Samar; Almaidhan, Asma

2013-01-01

To evaluate and compare the perceptions of Saudi dentists and lay people to altered smile features. Thirty-six digital smile photographs with altered features were used. Altered features included the following: crown length, width, gingival level of the lateral incisors, gingival display, midline diastema, and upper midline shift. The photographs were presented to a sample of 30 dentists and 30 lay people with equal gender distribution. Each participant rated each picture with a visual analogue scale, which ranged from 0 (very unattractive) to 100 (very attractive). Dentists were more critical than lay people when evaluating symmetrical crown length discrepancies. Compared to lay people, Saudi dentists gave lower ratings to a crown length discrepancy of >2 mm (P < 0.001), crown width discrepancy of ⩾2 mm (P < 0.05), change in gingiva to lip distance of ⩾2 mm (P < 0.01), and midline deviation of >1 mm (P < 0.01). There was no significant difference between dentists and lay people towards alterations in the gingival level of the lateral incisors or towards a space between the central incisors. No significant sex difference was seen across the groups. In this sample, Saudi dentists gave significantly lower attractiveness scores to crown length and crown width discrepancies, midline deviations, and changes in gingiva to lip distance compared to Saudi lay people.

Ligature wires and elastomeric rings: two methods of ligation, and their association with microbial colonization of Streptococcus mutans and lactobacilli.

PubMed

Forsberg, C M; Brattström, V; Malmberg, E; Nord, C E

1991-10-01

Twelve orthodontic patients undergoing treatment with fixed appliances took part in the present study. In all patients elastomeric rings were used for ligation on one side of the dental arch midline, whereas steel wires were used on the opposite side. The number of micro-organisms in samples of plaque, taken from the labial surface of the upper lateral incisors, was recorded on five occasions during treatment. In samples of saliva, the numbers of Streptococcus mutans and lactobacilli were recorded on the same occasions. This registration was also made on two occasions before insertion of the fixed appliance, and 6 weeks after the period of active treatment. The results showed that, in the majority of patients, the incisor which was attached to the arch-wire with an elastomeric ring, exhibited a greater number of micro-organisms in the plaque than the incisor ligated with steel wire. Following insertion of fixed appliances the number of S. mutans and lactobacilli in saliva increased significantly. Variations in the number of micro-organisms in the saliva during active treatment were not reflected in any relative increase or decrease in microbial colonization on either steel ligatures or elastomeric rings. The use of retainers after active treatment was not associated with increased numbers of micro-organisms in the saliva.

[Class III surgical patients facilitated by accelerated osteogenic orthodontic treatment].

PubMed

Wu, Jia-qi; Xu, Li; Liang, Cheng; Zou, Wei; Bai, Yun-yang; Jiang, Jiu-hui

2013-10-01

To evaluate the treatment time and the anterior and posterior teeth movement pattern as closing extraction space for the Class III surgical patients facilitated by accelerated osteogenic orthodontic treatment. There were 10 skeletal Class III patients in accelerated osteogenic orthodontic group (AOO) and 10 patients in control group. Upper first premolars were extracted in all patients. After leveling and alignment (T2), corticotomy was performed in the area of maxillary anterior teeth to accelerate space closing.Study models of upper dentition were taken before orthodontic treatment (T1) and after space closing (T3). All the casts were laser scanned, and the distances of the movement of incisors and molars were digitally measured. The distances of tooth movement in two groups were recorded and analyzed. The alignment time between two groups was not statistically significant. The treatment time in AOO group from T2 to T3 was less than that in the control group (less than 9.1 ± 4.1 months). The treatment time in AOO group from T1 to T3 was less than that in the control group (less than 6.3 ± 4.8 months), and the differences were significant (P < 0.01). Average distances of upper incisor movement (D1) in AOO group and control group were (2.89 ± 1.48) and (3.10 ± 0.95) mm, respectively. Average distances of upper first molar movement (D2) in AOO group and control group were (2.17 ± 1.13) and (2.45 ± 1.04) mm, respectively.No statistically significant difference was found between the two groups (P > 0.05). Accelerated osteogenic orthodontic treatment could accelerate space closing in Class III surgical patients and shorten preoperative orthodontic time. There were no influence on the movement pattern of anterior and posterior teeth during pre-surgical orthodontic treatment.

Factors influencing soft tissue profile changes following orthodontic treatment in patients with Class II Division 1 malocclusion.

PubMed

Maetevorakul, Suhatcha; Viteporn, Smorntree

2016-01-01

Several studies have shown soft tissue profile changes after orthodontic treatment in Class II Division 1 patients. However, a few studies have described factors influencing the soft tissue changes. The purpose of this study was to investigate the factors influencing the soft tissue profile changes following orthodontic treatment in Class II Division 1 patients. The subjects comprised 104 Thai patients age 8-16 years who presented Class II Division 1 malocclusions and were treated with different orthodontic modalities comprising cervical headgear, Class II traction and extraction of the four first premolars. The profile changes were evaluated from the lateral cephalograms before and after treatment by means of the X-Y coordinate system. Significant soft tissue profile changes were evaluated by paired t test at a 0.05 significance level. The correlations among significant soft tissue changes and independent variables comprising treatment modality, age, sex, pretreatment skeletal, dental and soft tissue morphology were evaluated by stepwise multiple regression analysis at a 0.05 significance level. The multiple regression analysis indicated that different treatment modalities, age, sex, pretreatment skeletal, dental and soft tissue morphology were related to the profile changes. The predictive power of these variables on the soft tissue profile changes ranged from 9.9 to 40.3%. Prediction of the soft tissue profile changes following treatment of Class II Division 1 malocclusion from initial patient morphology, age, sex and types of treatment was complicated and required several variables to explain their variations. Upper lip change in horizontal direction could be found only at the stomion superius and was less predictable than those of the lower lip. Variations in upper lip retraction at the stomion superius were explained by types of treatment (R(2) = 0.099), whereas protrusion of the lower lip at the labrale inferius was correlated with initial inclination of the lower incisor (L1 to NB), jaw relation (ANB angle), lower lip thickness and sex (R(2) = 0.403). Prediction of chin protrusion at the soft tissue pogonion was also low predictable (R(2) = 0.190) depending upon sex, age and initial mandibular plane angle (SN-GoGn). Additionally, age and sex also had mainly effect on change of the soft tissue profile in the vertical direction.

Endodontic-periodontal management of two rooted maxillary lateral incisor associated with complex radicular lingual groove by using spiral computed tomography as a diagnostic aid: a case report.

PubMed

Gandhi, A; Kathuria, A; Gandhi, T

2011-06-01

To present the successful endodontic and periodontal management of a two rooted maxillary lateral incisor tooth with a complex radicular lingual groove and severe periodontal destruction using spiral computed tomography as a diagnostic aid. A 30-year-old male patient presented with a chief complaint of mobility and discharge of pus in an upper front tooth. Clinical examination revealed a sinus tract on the labial gingival surface and a 10-mm-deep periodontal pocket associated with maxillary left lateral incisor tooth. On the lingual side, a groove emerging from cingulum, continuing mesioapically down the lingual aspect of tooth was found. Intraoral periapical radiographs demonstrated a lateral periodontal defect around the mesial aspect and a diffuse radiolucency at the apex of maxillary left lateral incisor tooth. The sinus tract was traced with gutta-percha to the maxillary left lateral incisor that showed an accessory root surrounded by a large radiolucent area. A spiral computed tomographic scan for better understanding of the complicated root canal morphology of the tooth was performed. Based on the clinical, radiographic and spiral computed tomographic findings, a diagnosis of an endo-perio lesion in tooth 22 was made. Management consisted of conventional root canal treatment, radiculoplasty, root resection of accessory root and surgical curettage of the periodontal defect. Follow-up with radiographic examination at 3 months and 1 year was performed. At 1-year recall, the patient was asymptomatic, there was no evidence of the sinus tract and a 3-mm nonbleeding pocket was present in relation to tooth 22. Progression of hard tissue healing was observed in the periapical radiograph taken 1 year postoperatively. The key to achieving favourable results in this particular type of developmental anomaly is accurate diagnosis and treatment planning. The health of the periapical osseous tissues appears to be the provital factor for tooth retention. A favourable outcome can only be achieved with a comprehensive treatment approach that effectively manages all local factors that are contributing to the disease process. © 2011 International Endodontic Journal.

Soft tissue effects of three different Class II/1-camouflage treatment strategies.

PubMed

Atik, Ezgi; Akarsu-Guven, Bengisu; Kocadereli, Ilken

2017-03-01

Aim of this retrospective study was to compare soft tissue effects of Class II treatments with the forsus fatigue resistant device (FRD), the pendulum appliance, and the extraction of two maxillary premolars, all of which were combined with pre-adjusted fixed appliances. The sample of 54 patients with Class II malocclusions was divided in three groups: group I patients (mean age = 15.91 years) were treated with the FRD concurrently used with fixed appliances; group II patients (mean age = 16.08 years) were treated with the pendulum appliance combined with a Nance and headgear followed by fixed appliances; and group III patients (mean age = 19.04 years) were treated with the extraction of two maxillary premolars with miniscrew anchorage. Soft tissue and dentoskeletal parameters were measured on pretreatment (T1) and posttreatment (T2) lateral cephalograms. The changes from T1 to T2 were compared between the groups using Kruskal-Wallis test, and treatment differences were evaluated with the Wilcoxon test at p < 0.05. Soft tissue measurement changes related to the upper and lower lips were significantly greater in group II than in group III (p < 0.05). Upper incisor measurement changes were significantly different between groups II and III. Lower incisor measurement changes were significantly different between groups I and III and groups II and III (p < 0.05). Pendulum and extraction treatment groups showed significant differences in relation with the upper and lower lip positional changes, which were significantly greater in the pendulum group. Treatment time with the extraction treatment was statistically shorter than with the nonextraction protocols.

Transparent aligners: An invisible approach to correct mild skeletal class III malocclusion

PubMed Central

Yezdani, A. Arif

2015-01-01

This case report highlights the treatment of a mild skeletal class III malocclusion with an invisible thermoplastic retainer. A 15-year-old female patient presented with a mild skeletal class III malocclusion with a retrognathic maxilla, orthognathic mandible, a low mandibular plane angle with Angle's class III malocclusion with maxillary lateral incisors in anterior cross-bite with crowding of maxillary anteriors, imbricated and rotated mandibular incisors and deep bite. Accurate upper and lower impressions and a bite registration were taken with polyvinyl siloxane rubber base impression material. This was then sent to the lab for the processing of a series of ClearPath aligners. The ClearPath virtual set-up sent from the lab provided the treatment plan and interproximal reduction estimation complete with posttreatment results. This enabled the clinician to actively participate in the treatment plan and provide the necessary suggestions. The ClearPath three-dimensional aligner was found to have effectively corrected the anterior cross-bite and crowding of the maxillary anteriors. PMID:26015738

A Morphological and Morphometric Study of Bite Marks Caused by Mice (Mus Musculus) on Different Baits for Forensic Purposes.

PubMed

Toledo, Víctor A; Fonseca, Gabriel M; González, Paula A; Ibarra, Luis; Torres, Francisco J; Sáez, Pedro L

2017-03-01

In animal bites, the dental attributes can be fundamental in identifying the marks made by various species on different matrices. Although rodent bite marks have been studied in the context of postmortem interference, little research has used different baits to analyze these marks linking not only specific behavior patterns but also the possibility of structural damage. Twenty mice (Mus musculus) were exposed to different baits to study their bite marks in a controlled model. The known pattern of parallel and multiple grooves has been seen in all baits, but polyvinyl chloride and fiber-optic cable were significantly different between each other and the other baits. Some baits showed patterns of anchorage of the upper incisors and space between the lower incisors when gnawing. This technical note represents a novel model of analysis where veterinarians and/or dentists may be asked to give an opinion on alleged animal bite marks. © 2016 American Academy of Forensic Sciences.

A three-dimensional soft tissue analysis of Class III malocclusion: a case-controlled cross-sectional study.

PubMed

Johal, Ama; Chaggar, Amrit; Zou, Li Fong

2018-03-01

The present study used the optical surface laser scanning technique to compare the facial features of patients aged 8-18 years presenting with Class I and Class III incisor relationship in a case-control design. Subjects with a Class III incisor relationship, aged 8-18 years, were age and gender matched with Class I control and underwent a 3-dimensional (3-D) optical surface scan of the facial soft tissues. Landmark analysis revealed Class III subjects displayed greater mean dimensions compared to the control group most notably between the ages of 8-10 and 17-18 years in both males and females, in respect of antero-posterior (P = 0.01) and vertical (P = 0.006) facial dimensions. Surface-based analysis, revealed the greatest difference in the lower facial region, followed by the mid-face, whilst the upper face remained fairly consistent. Significant detectable differences were found in the surface facial features of developing Class III subjects.

Effects of the pendulum appliance, cervical headgear, and 2 premolar extractions followed by fixed appliances in patients with Class II malocclusion.

PubMed

de Almeida-Pedrin, Renata Rodrigues; Henriques, José Fernando Castanha; de Almeida, Renato Rodrigues; de Almeida, Marcio Rodrigues; McNamara, James A

2009-12-01

In this retrospective study, we compared the cephalometric effects, the dental-arch changes, and the efficiency of Class II treatment with the pendulum appliance, cervical headgear, or extraction of 2 maxillary premolars, all associated with fixed appliance therapy. The sample of 82 patients with Class II malocclusion was divided into 3 groups: group 1 patients (n = 22; treatment time, 3.8 years) were treated with the pendulum appliance and fixed orthodontic appliances. Group 2 patients (n = 30; treatment time, 3.2 years) were treated with cervical headgear followed by fixed appliances; group 3 patients (n = 30; treatment time, 2.1 years) were treated with 2 maxillary premolar extractions and fixed appliances. The average starting ages of the groups ranged from 13.2 to 13.8 years. Data were obtained from serial cephalometric measurements and dental casts. The dental casts were analyzed with the treatment priority index. The treatment efficiency index was also used. The 3 treatment protocols produced similar cephalometric effects, especially skeletally. Comparisons among the 2 distalizing appliances (pendulum and cervical headgear) and extraction of 2 maxillary premolars for Class II treatment showed changes primarily in the maxillary dentoalveolar component and dental relationships. The facial profile was similar after treatment, except for slightly more retrusion of the upper lip in the extraction patients. The treatment priority index demonstrated that occlusal outcomes also were similar among the groups. The treatment efficiency index had higher values for the extraction group. The effects of treatment with the pendulum appliance or cervical headgear and extraction of 2 maxillary premolars associated with fixed appliances were similar from both occlusal and cephalometric standpoints. Class II treatment with extraction of maxillary teeth was more efficient because of the shorter treatment time. Differences in maxillary incisor retraction should be noted, but these differences might have been due to greater maxillary dentoalveolar protrusion in the extraction group before treatment.

Exploring the characteristics, global distribution and reasons for retraction of published articles involving human research participants: a literature survey.

PubMed

Li, Guowei; Kamel, Mariam; Jin, Yanling; Xu, Michael Kuan; Mbuagbaw, Lawrence; Samaan, Zainab; Levine, Mitchell Ah; Thabane, Lehana

2018-01-01

Article retraction is a measure taken by journals or authors where there is evidence of research misconduct or error, redundancy, plagiarism or unethical research. Recently, the retraction of scientific publications has been on the rise. In this survey, we aimed to describe the characteristics and distribution of retracted articles and the reasons for retractions. We searched retracted articles on the PubMed database and Retraction Watch website from 1980 to February 2016. The primary outcomes were the characteristics and distribution of retracted articles and the reasons for retractions. The secondary outcomes included how article retractions were handled by journals and how to improve the journal practices toward article retractions. We included 1,339 retracted articles. Most retracted articles had six authors or fewer. Article retraction was most common in the USA (26%), Japan (11%) and Germany (10%). The main reasons for article retraction were misconduct (51%, n = 685) and error (14%, n = 193). There were 66% (n = 889) of retracted articles having male senior or corresponding authors. Of the articles retracted after August 2010, 63% (n = 567) retractions were reported on Retraction Watch. Large discrepancies were observed in the ways that different journals handled article retractions. For instance, articles were completely withdrawn from some journals, while in others, articles were still available with no indication of retraction. Likewise, some retraction notices included a detailed account of the events that led to article retraction, while others only consisted of a statement indicating the article retraction. The characteristics, geographic distribution and reasons for retraction of published articles involving human research participants were examined in this survey. More efforts are needed to improve the consistency and transparency of journal practices toward article retractions.

Exploring the characteristics, global distribution and reasons for retraction of published articles involving human research participants: a literature survey

PubMed Central

Li, Guowei; Kamel, Mariam; Jin, Yanling; Xu, Michael Kuan; Mbuagbaw, Lawrence; Samaan, Zainab; Levine, Mitchell AH; Thabane, Lehana

2018-01-01

Aim Article retraction is a measure taken by journals or authors where there is evidence of research misconduct or error, redundancy, plagiarism or unethical research. Recently, the retraction of scientific publications has been on the rise. In this survey, we aimed to describe the characteristics and distribution of retracted articles and the reasons for retractions. Methods We searched retracted articles on the PubMed database and Retraction Watch website from 1980 to February 2016. The primary outcomes were the characteristics and distribution of retracted articles and the reasons for retractions. The secondary outcomes included how article retractions were handled by journals and how to improve the journal practices toward article retractions. Results We included 1,339 retracted articles. Most retracted articles had six authors or fewer. Article retraction was most common in the USA (26%), Japan (11%) and Germany (10%). The main reasons for article retraction were misconduct (51%, n = 685) and error (14%, n = 193). There were 66% (n = 889) of retracted articles having male senior or corresponding authors. Of the articles retracted after August 2010, 63% (n = 567) retractions were reported on Retraction Watch. Large discrepancies were observed in the ways that different journals handled article retractions. For instance, articles were completely withdrawn from some journals, while in others, articles were still available with no indication of retraction. Likewise, some retraction notices included a detailed account of the events that led to article retraction, while others only consisted of a statement indicating the article retraction. Conclusion The characteristics, geographic distribution and reasons for retraction of published articles involving human research participants were examined in this survey. More efforts are needed to improve the consistency and transparency of journal practices toward article retractions. PMID:29403283

Removable orthodontic appliances: new perspectives on capabilities and efficiency.

PubMed

Hamid Zafarmand, A; Mahdi Zafarmand, M

2013-06-01

Removable appliances are a dependable choice for many patients but like all orthodontic appliances, they have some limitations in use. Patient selection and appropriate appliance design are two key factors for success. Many patients, especially adults, prefer intra-oral appliances to extra-oral devices. Sometimes a removable intra-oral appliance can solve a dental problem in a shorter period of time compared to fixed treatment, and this has also been repeatedly seen in molar distalisation. From the interceptive perspective, the appliance can prevent or alleviate an impending crowding for erupting permanent incisors. This article describes 5 patients with different orthodontic problems: impending crowding for erupting upper canine with 2 approaches, provision of space for upper cuspids, resolution of chronic attrition of anterior teeth, relief of space shortage for upper canines eruption, and reduction of excess overjet. All subjects were treated with removable appliances of various designs.

Why Has the Number of Scientific Retractions Increased?

PubMed Central

Steen, R. Grant; Casadevall, Arturo; Fang, Ferric C.

2013-01-01

Background The number of retracted scientific publications has risen sharply, but it is unclear whether this reflects an increase in publication of flawed articles or an increase in the rate at which flawed articles are withdrawn. Methods and Findings We examined the interval between publication and retraction for 2,047 retracted articles indexed in PubMed. Time-to-retraction (from publication of article to publication of retraction) averaged 32.91 months. Among 714 retracted articles published in or before 2002, retraction required 49.82 months; among 1,333 retracted articles published after 2002, retraction required 23.82 months (p<0.0001). This suggests that journals are retracting papers more quickly than in the past, although recent articles requiring retraction may not have been recognized yet. To test the hypothesis that time-to-retraction is shorter for articles that receive careful scrutiny, time-to-retraction was correlated with journal impact factor (IF). Time-to-retraction was significantly shorter for high-IF journals, but only ∼1% of the variance in time-to-retraction was explained by increased scrutiny. The first article retracted for plagiarism was published in 1979 and the first for duplicate publication in 1990, showing that articles are now retracted for reasons not cited in the past. The proportional impact of authors with multiple retractions was greater in 1972–1992 than in the current era (p<0.001). From 1972–1992, 46.0% of retracted papers were written by authors with a single retraction; from 1993 to 2012, 63.1% of retracted papers were written by single-retraction authors (p<0.001). Conclusions The increase in retracted articles appears to reflect changes in the behavior of both authors and institutions. Lower barriers to publication of flawed articles are seen in the increase in number and proportion of retractions by authors with a single retraction. Lower barriers to retraction are apparent in an increase in retraction for “new” offenses such as plagiarism and a decrease in the time-to-retraction of flawed work. PMID:23861902

A Rare Case of Bilateral Agenesis of Central Lower Incisors Associated With Upper Impacted Canine- A Case Report

PubMed Central

PORUMB, Anca; IGNAT ROMANUL, Ioana; DALAI, Camelia; CIAVOI, Gabiela; TIG, Ioan Andrei

2016-01-01

This case of a female patient, 14 yr old with association of the two anomalies, which we came across with in 2014, is rarely met in the specialty practice. The impacted canines are part of the group of dental anomalies of position, while the agenesis is part of the group of dental number anomalies. The orthodontic treatment in the two arches has to be differentiated, the therapeutic objectives being, also different in the two arches. PMID:27141502

A Rare Case of Bilateral Agenesis of Central Lower Incisors Associated With Upper Impacted Canine- A Case Report.

PubMed

Porumb, Anca; Ignat Romanul, Ioana; Dalai, Camelia; Ciavoi, Gabiela; Tig, Ioan Andrei

2016-03-01

This case of a female patient, 14 yr old with association of the two anomalies, which we came across with in 2014, is rarely met in the specialty practice. The impacted canines are part of the group of dental anomalies of position, while the agenesis is part of the group of dental number anomalies. The orthodontic treatment in the two arches has to be differentiated, the therapeutic objectives being, also different in the two arches.

Applicability of the Moyers' Probability Tables in Adolescents with Different Facial Biotypes

PubMed Central

Carrillo, Jorge J. Pavani; Rubial, Maria C.; Albornoz, Cristina; Villalba, Silvina; Damiani, Patricia; de Cravero, Marta Rugani

2017-01-01

Introduction: The Moyers’ probability tables are used in mixed dentition analysis to estimate the extent of space required for the alignment of canines and premolars, by correlating the mesiodistal size of lower incisors with the size of permanent canines and premolars. Objective: This study intended to evaluate the applicability of the Moyer's probability tables for predicting the mesiodistal space needed for the correct location of premolars and permanent canines non-erupted, in adolescents of the city of Cordoba, Argentina, who show different facial biotypes. Materials and Methods: Models and tele-radiographies of 478 adolescents of both genders from 10 to 15 years of age were analyzed. The tele-radiographies were measured manually in order to determine the facial biotype. The models were scanned with a gauged scanner (HP 3670) and measured by using Image Pro Plus 4.5 software. Results: According to this study, the comparison between the Moyer´s probability table, and the table created at the National University of Córdoba (UNC) (at 95%, 75%, and 50%) shows that, in both tables, a higher value of mesiodistal width of lower incisors corresponds to a bigger difference in the space needed for permanent canines and premolars; being the need for space for permanents canines and premolars bigger in the UNC´s table. On the other hand, when contrasting the values of mesiodistal space for permanent canines and premolars associated with each facial biotype, the discrepancies between groups were not statistically significant (P >0.05). However, we found differences in the size of the space required according to the mesiodistal width range of the lower incisors for each biotype: a) The comparison of lower-range values, with a mesialdistal width of lower incisors less than 22 mm, the space required for permanent canines and premolars resulted smaller in patients with dolichofacial biotype than in patients with mesofacial and braquifacial biotypes. The latter biotypes have meager differences between them. b) The comparison of mid-range values, with a mesialdistal width of lower incisors from 22 to 25 millimeters, shows that the values of required alignment space are similar in the three facial biotypes. c) Finally, the comparison of upper range values, with a mesialdistal width of lower incisors greater than 25 millimeters, indicates that the space required for dolichofacial biotypes tends to be higher than in mesofacial and brachyfacial biotypes. Conclusion: The Moyer´s probability tables should be created to meet the needs of the population under study, with no consideration of patients’ facial biotypes. PMID:28567145

Fate of Articles That Warranted Retraction Due to Ethical Concerns: A Descriptive Cross-Sectional Study

PubMed Central

Elia, Nadia; Wager, Elizabeth; Tramèr, Martin R.

2014-01-01

Objective To study journals' responses to a request from the State Medical Association of Rheinland-Pfalz, Germany, to retract 88 articles due to ethical concerns, and to check whether the resulting retractions followed published guidelines. Design Descriptive cross-sectional study. Population 88 articles (18 journals) by the anaesthesiologist Dr. Boldt, that warranted retraction. Method According to the recommendations of the Committee on Publication Ethics, we regarded a retraction as adequate when a retraction notice was published, linked to the retracted article, identified the title and authors of the retracted article in its heading, explained the reason and who took responsibility for the retraction, and when the retracted article was freely accessible and marked using a transparent watermark that preserved original content. Two authors extracted data independently (January 2013) and contacted editors-in-chief and publishers for clarification in cases of inadequate retraction. Results Five articles (6%) fulfilled all criteria for adequate retraction. Nine (10%) were not retracted (no retraction notice published, full text article not marked). 79 (90%) retraction notices were published, 76 (86%) were freely accessible, but only 15 (17%) were complete. 73 (83%) full text articles were marked as retracted, of which 14 (16%) had an opaque watermark hiding parts of the original content, and 11 (13%) had all original content deleted. 59 (67%) retracted articles were freely accessible. One editor-in-chief stated personal problems as a reason for incomplete retractions, eight blamed their publishers. Two publishers cited legal threats from Dr. Boldt's co-authors which prevented them from retracting articles. Conclusion Guidelines for retracting articles are incompletely followed. The role of publishers in the retraction process needs to be clarified and standards are needed on marking retracted articles. It remains unclear who should check that retractions are done properly. Legal safeguards are required to allow retraction of articles against the wishes of authors. PMID:24465744

[Autogenous tarsus transplant as spacer for treatment of lower lid retraction in Grave's disease].

PubMed

Schittkowski, M P; Fichter, N; Guthoff, R F

2008-08-01

Lower lid retraction in dysthyroid orbitopathy is of less functional concern than optic neuropathy or diplopia in central positions of gaze. However, it may lead to incomplete lid closure resulting in corneal exposure. Patients often suffer from aesthetic impairment. A retrospective analysis of 13 consecutive patients treated for lower lid retraction due to Grave's Disease between 2005 and 2007 was undertaken. In spite of regular ophthalmological examinations, specific attention was directed to measurement of the lid fissure width and scleral show for quantification of lower lid retraction. OPERATION: The lower lid is everted and the conjunctiva is opened horizontally underneath the tarsal edge. Lower lid retractors are disinserted and dissected until the lower lid might be elevated in symmetry to the fellow eye. This procedure is continued until 1 mm overcorrection is gained. A free tarsal transplant is harvested from the ipsilateral upper lid tarsus. At least 4 mm vertical tarsus have to be left. Tarsus is sutured with absorbable material. In the 13 patients operated upon (9 women, 4 men) aged 23 - 67 years, scleral show was preoperative 2.7 mm (mean) and postoperative 0.1 mm. Lid fissure width was preoperative 13 mm (10 - 16 mm) and immediately postoperative 10.3 mm (7 - 13). 6 months postoperative the lid-elevating effect was reduced by 0.5 mm in maximum in the 9 patients available for control. The lid closure deficit, which was present in 7 patients before, could be corrected completely in 5 and diminished to 1 mm in 2 patients. Using this particular technique, functional and aesthetical satisfying results are obtained. The main advantages are renunciation of allogen, xenogeny or synthetic material with its possible risks of slow-virus infection and/or extrusion. Further studies are necessary to evaluate long-term results.

Visibility of retractions: a cross-sectional one-year study

PubMed Central

2013-01-01

Background Retraction in Medline medical literature experienced a tenfold increase between 1999 and 2009, however retraction remains a rare event since it represents 0.02% of publications. Retractions used to be handled following informal practices until they were formalized in 2009 by the Committee on Publication Ethics (COPE). The objective of our study was to describe the compliance to these guidelines. Methods All retractions published in 2008 were identified using the Medline publication type “retraction of publication”. The notices of retraction and the original articles were retrieved. For each retraction, we identified the reason for retraction, the country of affiliation of the first author, the time to retraction, the impact factor of the journal and the mention of retraction on the original article. Results Overall, 244 retractions were considered for analysis. Formal retraction notices could not be retrieved for 9. Of the 235 retractions available (96%), the reason was not detailed for 21 articles (9%). The most cited reasons were mistakes (28%), plagiarism (20%), fraud (14%) and overlap (11%). The original paper or its location was found for 233 retractions (95%). Of these, 22% were available with no mention of the retraction. Conclusion A standard retraction form could be helpful, with a check list of major reason, leaving the editor free to provide the reader with any further information. Original articles should remain available with a clear mention of the retraction. PMID:23782596

The (lack of) impact of retraction on citation networks.

PubMed

Madlock-Brown, Charisse R; Eichmann, David

2015-02-01

Article retraction in research is rising, yet retracted articles continue to be cited at a disturbing rate. This paper presents an analysis of recent retraction patterns, with a unique emphasis on the role author self-cites play, to assist the scientific community in creating counter-strategies. This was accomplished by examining the following: (1) A categorization of retracted articles more complete than previously published work. (2) The relationship between citation counts and after-retraction self-cites from the authors of the work, and the distribution of self-cites across our retraction categories. (3) The distribution of retractions written by both the author and the editor across our retraction categories. (4) The trends for seven of our nine defined retraction categories over a 6-year period. (5) The average journal impact factor by category, and the relationship between impact factor, author self-cites, and overall citations. Our findings indicate new reasons for retractions have emerged in recent years, and more editors are penning retractions. The rates of increase for retraction varies by category, and there is statistically significant difference of average impact factor between many categories. 18 % of authors self-cite retracted work post retraction with only 10 % of those authors also citing the retraction notice. Further, there is a positive correlation between self-cites and after retraction citations.

The influence of varying maxillary lateral incisor dimensions on perceived smile aesthetics.

PubMed

Bukhary, S M N; Gill, D S; Tredwin, C J; Moles, D R

2007-12-22

The aim of this study was to determine the influence of varying the dimensions of the maxillary lateral incisors on perceived smile aesthetics. Clinical study. Postgraduate dental teaching hospital. A photograph of a female smile displaying only the lips and teeth was digitally altered. First, the width of the maxillary lateral incisors, in proportion to the central incisor, was altered at 5% intervals to produce six images (52%, 57%, 62% [the 'golden proportion'], 67%, 72% and 77%). In a second group, the length of the lateral incisor was altered at 0.5 mm increments to produce five images with the lateral incisor 0.5 mm, 1 mm, 1.5 mm, 2 mm and 2.5 mm shorter than the adjacent central incisor. The photos were ranked from 'most attractive' to 'least attractive' by 41 hypodontia patients, 46 non-hypodontia 'control' patients and 30 dentists. The 67% followed by the 72% lateral-to-central width proportions were the 'most preferred' by all groups. A maxillary lateral incisor that is 1-1.5 mm shorter than the central incisor was the 'most popular' maxillary lateral incisor length. The very short and very long maxillary lateral incisor was consistently perceived as 'least attractive'. There is no evidence to suggest that the golden proportion should be considered the ideal aesthetic standard when creating space for the replacement of missing lateral incisors.

Influence of bimaxillary protrusion on the perception of smile esthetics.

PubMed

Almutairi, Terki K; Albarakati, Sahar F; Aldrees, Abdullah M

2015-01-01

To evaluate the impact of bimaxillary protrusion on smile esthetics as perceived by dental professionals and laypersons. One hundred and fifty evaluators, equally distributed into their respective panels (orthodontists, general dentists, and laypersons), participated in this cross-sectional study conducted in April to December 2012 in Riyadh, Saudi Arabia. The patient sample consisted of 14 female patients divided equally into 2 groups: bimaxillary protrusion patients, and patients who have had 4-premolar extraction treatment. Two standardized photographs (frontal and three-quarter close-up smile views), and a lateral cephalogram were taken for each patient. The evaluators were asked to rate the attractiveness of each photo according to a 100-mm visual analog scale. These esthetic ratings were correlated with the patients' cephalometric measurements. The bimaxillary protrusion group was rated significantly as less attractive than the treatment group by each evaluator panel. Panel comparison showed that laypeople were less receptive of bimaxillary protrusion than dental professionals. Frontal and three-quarter views of the same smiles were not similarly rated for esthetic perceptions. Correlational analysis revealed that the dentoalveolar measurement with the highest significant negative correlation to the smile esthetics was the upper incisors to palatal plane (U1-PP) angle. Patients with bimaxillary protrusion were found to be less attractive than patients who were treated for the condition. This was especially evident among the laypersons. An increase in the upper incisor inclination, as well as a decrease in the interincisal angle compounds the bimaxillary effect. 

Influence of bimaxillary protrusion on the perception of smile esthetics

PubMed Central

Almutairi, Terki K.; Albarakati, Sahar F.; Aldrees, Abdullah M.

2015-01-01

Objectives: To evaluate the impact of bimaxillary protrusion on smile esthetics as perceived by dental professionals and laypersons. Methods: One hundred and fifty evaluators, equally distributed into their respective panels (orthodontists, general dentists, and laypersons), participated in this cross-sectional study conducted in April to December 2012 in Riyadh, Saudi Arabia. The patient sample consisted of 14 female patients divided equally into 2 groups: bimaxillary protrusion patients, and patients who have had 4-premolar extraction treatment. Two standardized photographs (frontal and three-quarter close-up smile views), and a lateral cephalogram were taken for each patient. The evaluators were asked to rate the attractiveness of each photo according to a 100-mm visual analog scale. These esthetic ratings were correlated with the patients’ cephalometric measurements. Results: The bimaxillary protrusion group was rated significantly as less attractive than the treatment group by each evaluator panel. Panel comparison showed that laypeople were less receptive of bimaxillary protrusion than dental professionals. Frontal and three-quarter views of the same smiles were not similarly rated for esthetic perceptions. Correlational analysis revealed that the dentoalveolar measurement with the highest significant negative correlation to the smile esthetics was the upper incisors to palatal plane (U1-PP) angle. Conclusion: Patients with bimaxillary protrusion were found to be less attractive than patients who were treated for the condition. This was especially evident among the laypersons. An increase in the upper incisor inclination, as well as a decrease in the interincisal angle compounds the bimaxillary effect. PMID:25630010

Is subcranial Le Fort III plus Le Fort I osteotomy stable?

PubMed

Boos Lima, Fernanda Brasil Daura Jorge; Hochuli Vieira, Eduardo; Juergens, Philipp; Lima Junior, Sergio Monteiro

2017-12-01

The purpose of this study was to test whether associated subcranial Le Fort III (sLF III) and Le Fort I (LF I) osteotomies are stable after large advancements of the middle third of the face and maxilla. The authors designed a retrospective study and enrolled a sample of consecutive patients with midface hypoplasia treated with associated sLF III and LF I osteotomies in this IRB-approved study between September 2013 and February 2015. To test whether the long-term stability was satisfactory, the authors compared cephalometric changes from immediately after surgery to 18 months after surgery taken from multi-slice computed tomography using two different third-party imaging software programs. Statistical significance was set as P ≤ 0.05. The sample comprised 11 patients (mean age 23.84 ± 4.17 yr; 54% men). The mean advancement of the upper incisor immediately after surgery was 10.03 ± 1.6 mm. After 18 months, the position of the upper incisor did not vary significantly (10.18 ± 2.35 mm). All other cephalometric landmarks did not present statistically significant differences between immediately after and 18 months after surgery, with horizontal and vertical variations of less than one millimetre. This study supports that sLF III and LF I osteotomies are effective in maintaining stable horizontal and vertical skeletal positioning after surgery. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Retracted Publications in Orthopaedics: Prevalence, Characteristics, and Trends.

PubMed

Rai, Rahul; Sabharwal, Sanjeev

2017-05-03

Retracted publications are a crucial, yet overlooked, issue in the scientific community. The purpose of our study was to assess the prevalence, characteristics, and trends of retracted publications in the field of orthopaedics. Five databases were utilized to identify retracted publications in orthopaedics. The cited articles were assessed for various characteristics, including reason for retraction, based on the Committee on Publication Ethics (COPE) guidelines and trends over time. From 1984 to June 4, 2016, 59 of 229,502 orthopaedic publications were retracted (3 per 10,000 articles). There was a spike in the prevalence (22 of 59) of retracted articles in 2015. When compared with the total number of retracted publications identified through PubMed, the field of orthopaedics represented 1.4% of all retracted publications. The original version of 47 of these 59 retracted publications was still available on the respective journal's web site; 14 (30%) of these were not noted as having been retracted. The mean time from electronic publication to retraction was 19.4 ± 23.3 months. The mean number of citations of a retracted publication after the date of retraction was 9.3 ± 19.3. Reasons for retraction included plagiarism (32%), misconduct (27%), redundant publication (22%), miscalculation or experimental error (8%), and unethical research (0%); the reason for retraction was not stated for 10% of the publications. There was no correlation between a journal's impact factor and the mean number of months to retraction (p = 0.564). While uncommon, the retraction of publications within the field of orthopaedics may be increasing. The most often cited reasons for retraction were plagiarism, misconduct, and redundant publication. Retracted articles continue to be cited in the literature after retraction. Greater awareness of the COPE guidelines within the orthopaedic community and more efficient means to prevent the citation of retracted articles are needed.

A Comprehensive Survey of Retracted Articles from the Scholarly Literature

PubMed Central

Grieneisen, Michael L.; Zhang, Minghua

2012-01-01

Background The number of retracted scholarly articles has risen precipitously in recent years. Past surveys of the retracted literature each limited their scope to articles in PubMed, though many retracted articles are not indexed in PubMed. To understand the scope and characteristics of retracted articles across the full spectrum of scholarly disciplines, we surveyed 42 of the largest bibliographic databases for major scholarly fields and publisher websites to identify retracted articles. This study examines various trends among them. Results We found, 4,449 scholarly publications retracted from 1928–2011. Unlike Math, Physics, Engineering and Social Sciences, the percentages of retractions in Medicine, Life Science and Chemistry exceeded their percentages among Web of Science (WoS) records. Retractions due to alleged publishing misconduct (47%) outnumbered those due to alleged research misconduct (20%) or questionable data/interpretations (42%). This total exceeds 100% since multiple justifications were listed in some retraction notices. Retraction/WoS record ratios vary among author affiliation countries. Though widespread, only miniscule percentages of publications for individual years, countries, journals, or disciplines have been retracted. Fifteen prolific individuals accounted for more than half of all retractions due to alleged research misconduct, and strongly influenced all retraction characteristics. The number of articles retracted per year increased by a factor of 19.06 from 2001 to 2010, though excluding repeat offenders and adjusting for growth of the published literature decreases it to a factor of 11.36. Conclusions Retracted articles occur across the full spectrum of scholarly disciplines. Most retracted articles do not contain flawed data; and the authors of most retracted articles have not been accused of research misconduct. Despite recent increases, the proportion of published scholarly literature affected by retraction remains very small. Articles and editorials discussing retractions, or their relation to research integrity, should always consider individual cases in these broad contexts. However, better mechanisms are still needed for raising researchers’ awareness of the retracted literature in their field. PMID:23115617

A comprehensive survey of retracted articles from the scholarly literature.

PubMed

Grieneisen, Michael L; Zhang, Minghua

2012-01-01

The number of retracted scholarly articles has risen precipitously in recent years. Past surveys of the retracted literature each limited their scope to articles in PubMed, though many retracted articles are not indexed in PubMed. To understand the scope and characteristics of retracted articles across the full spectrum of scholarly disciplines, we surveyed 42 of the largest bibliographic databases for major scholarly fields and publisher websites to identify retracted articles. This study examines various trends among them. We found, 4,449 scholarly publications retracted from 1928-2011. Unlike Math, Physics, Engineering and Social Sciences, the percentages of retractions in Medicine, Life Science and Chemistry exceeded their percentages among Web of Science (WoS) records. Retractions due to alleged publishing misconduct (47%) outnumbered those due to alleged research misconduct (20%) or questionable data/interpretations (42%). This total exceeds 100% since multiple justifications were listed in some retraction notices. Retraction/WoS record ratios vary among author affiliation countries. Though widespread, only miniscule percentages of publications for individual years, countries, journals, or disciplines have been retracted. Fifteen prolific individuals accounted for more than half of all retractions due to alleged research misconduct, and strongly influenced all retraction characteristics. The number of articles retracted per year increased by a factor of 19.06 from 2001 to 2010, though excluding repeat offenders and adjusting for growth of the published literature decreases it to a factor of 11.36. Retracted articles occur across the full spectrum of scholarly disciplines. Most retracted articles do not contain flawed data; and the authors of most retracted articles have not been accused of research misconduct. Despite recent increases, the proportion of published scholarly literature affected by retraction remains very small. Articles and editorials discussing retractions, or their relation to research integrity, should always consider individual cases in these broad contexts. However, better mechanisms are still needed for raising researchers' awareness of the retracted literature in their field.

Raising the suborbicularis oculi fat (SOOF): its role in chronic facial palsy

PubMed Central

Olver, J.

2000-01-01

AIMS—To determine the adjuvant role of unilateral suborbicularis oculi fat (SOOF) lift in the periorbital rehabilitation of patients with chronic facial palsy.
METHODS—In a non-comparative prospective case series nine adult patients (seven male, two female) aged 34-90 years (mean 60.5) with chronic unrecovered facial palsy (over 1 year), who had not had any previous rehabilitative periorbital surgery, were studied. Lateral tarsal strip and adjuvant transconjunctival approach subperiosteal SOOF lift under local or general anaesthesia were performed; medial canthoplasty was performed where indicated. There was clinical observation of the long term (over 1 year) effect on the ptotic palpebral-malar sulcus and lower eyelid retraction.
RESULTS—The patients were followed up for 12-24 months (mean 16). Seven patients (77%) had sustained clinical reduction of palpebral-malar sulcus ptosis. All patients had sustained reduction of lagophthalmos. Early postoperative complications included conjunctival cheimosis in 77%. Three patients with persistent keratitis required further surgical procedures on their upper eyelid to reduce the palpebral aperture. There were no cases of infraorbital nerve anaesthesia or recurrent lower eyelid retraction.
CONCLUSIONS—The SOOF lift has an adjuvant role in chronic facial palsy with lower eyelid retraction and ptotic-palpebral malar sulcus. It supports the lower eyelid elevation and tightening achieved with the lateral tarsal strip. The best results were obtained in congenital facial palsy.

 PMID:11090482

[Erectile complications after radical surgery for penile plastic induration].

PubMed

Austoni, E; Mantovani, F; Colombo, F; Canclini, L; Mastromarino, G; Vecchio, D; Fenice, O

1994-02-01

The radical surgical option we propose for Peyronie's disease consists in removing the sclero-hyalinotic focus of disease and replacing it by an autologous dermal graft taken from the upper outer thigh area. Between 1981 and 1991, we operated 335 patients with IPP, 152 of whom underwent plaque excision and dermal graft. All could be assessed at two-year follow-up. Two main complications were observed: mild penile flexure due to scar retraction of the graft (35% of cases), and partial erectile deficit with decreased corporal rigidity (17% of cases). The degree of the graft retraction is linked to the individual's histologic response. A mild deviation of the penis can occur some months after surgery and is not a relapse flexure due to disease progression (as it should have evolutive characteristics) but is mere scar retraction and will spontaneously regress. As the patient will date the onset of a postoperative erectile deficit from the time of the operation, it is advisable to assess preoperatively the erectile ability of all patients. Furthermore, an impaired erectile response could result from hypoaesthesia of the glans, post-surgical stress, and fibrosis of the erectile tissue. A retrospective assessment of radical surgery cases involving plaque excision and dermal graft lead us to propose this option where precise indications apply, providing the presence of other alterations of the erectile function are pre-operatively assessed.

COMPUTED TOMOGRAPHIC FEATURES OF INCISOR PSEUDO-ODONTOMAS IN PRAIRIE DOGS (CYNOMYS LUDOVICIANUS).

PubMed

Pelizzone, Igor; Di Ianni, Francesco; Volta, Antonella; Gnudi, Giacomo; Manfredi, Sabrina; Bertocchi, Mara; Parmigiani, Enrico

2017-05-01

Maxillary incisor pseudo-odontomas are common in pet prairie dogs and can cause progressive respiratory obstruction, while mandibular pseudo-odontomas are rarely clinically significant. The aim of this retrospective cross-sectional study was to describe CT features of maxillary and mandibular incisor pseudo-odontomas vs. normal incisors in a group of pet prairie dogs. All pet prairie dogs with head CT scans acquired during the period of 2013-2015 were included. A veterinary radiologist who was aware of final diagnosis reviewed CT scans and recorded qualitative features of affected and normal incisors. Mean density values for the pulp cavity and palatal and buccal dentin were also recorded. A total of 16 prairie dogs were sampled (12 normal maxillary incisors, 20 confirmed maxillary incisor pseudo-odontomas, 20 normal mandibular incisors, 12 presumed mandibular incisor pseudo-odontomas). Maxillary incisors with confirmed pseudo-odontomas had a significantly hyperattenuating pulp and dentin in the reserve crown and apical zone, when compared to normal maxillary incisors. Pseudo-odontomas appeared as enlargements of the apical zone with a globular/multilobular hyperattenuating mass formation haphazardly arranged, encroaching on midline and growing caudally and ventrally. Presumed mandibular incisor pseudo-odontomas had similar CT characteristics. In 60% of prairie dogs with maxillary incisor pseudo-odontomas, the hard palate was deformed and the mass bulged into the oral cavity causing loss of the palatine bone. The common nasal meatus was partially or totally obliterated in 81.8% of prairie dogs with maxillary pseudo-odontomas. Findings supported the use of CT for characterizing extent of involvement and surgical planning in prairie dogs with pseudo-odontomas. © 2017 American College of Veterinary Radiology.

Evaluation of root and alveolar bone development of unilateral osseous impacted immature maxillary central incisors after the closed-eruption technique.

PubMed

Shi, Xiangru; Xie, Xiaoyan; Quan, Junkang; Wang, Xiaozhe; Sun, Xiangyu; Zhang, Chenying; Zheng, Shuguo

2015-10-01

In this study, we evaluated root and alveolar bone development in unilateral osseous impacted immature maxillary central incisors by cone-beam computed tomography before and after closed-eruption treatment, in comparison with naturally erupted contralateral immature maxillary central incisors. The study included 30 patients, 20 boys and 10 girls, with a mean age of 8.44 ± 1.20 years (range, 6.5-11.2 years). After treatment, the root lengths of both the impacted maxillary central incisors (10.66 ± 2.10 mm) and the contralateral maxillary central incisors (11.04 ± 1.76 mm) were significantly greater than their pretreatment values (6.67 ± 1.94 and 9.02 ± 2.13 mm, respectively). The root canal widths of the incisors decreased significantly after treatment. From the posttreatment cone-beam computed tomography images, the ratio of exposed root length to total root length and the thickness of the alveolar bone at 1 mm under the alveolar crest and at the apex were calculated to evaluate alveolar bone development. Impacted immature maxillary central incisors differed significantly from contralateral immature maxillary central incisors in labial exposed root length, labial ratio to total root length, and lingual alveolar crest. Clinical crown height was higher (statistically but not clinically) for the impacted incisors (9.87 mm) than for the contralateral incisors (9.37 mm). Impacted immature incisors grew to the same stage as did erupted contralateral incisors after closed-eruption treatment. Both incisor types had some alveolar bone loss, and thin alveolar bone surrounded the roots. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Retractions in cancer research: a systematic survey.

PubMed

Bozzo, Anthony; Bali, Kamal; Evaniew, Nathan; Ghert, Michelle

2017-01-01

The annual number of retracted publications in the scientific literature is rapidly increasing. The objective of this study was to determine the frequency and reason for retraction of cancer publications and to determine how journals in the cancer field handle retracted articles. We searched three online databases (MEDLINE, Embase, The Cochrane Library) from database inception until 2015 for retracted journal publications related to cancer research. For each article, the reason for retraction was categorized as plagiarism, duplicate publication, fraud, error, authorship issues, or ethical issues. Accessibility of the retracted article was defined as intact, removed, or available but with a watermark over each page. Descriptive data was collected on each retracted article including number of citations, journal name and impact factor, study design, and time between publication and retraction. The publications were screened in duplicated and two reviewers extracted and categorized data. Following database search and article screening, we identified 571 retracted cancer publications. The majority (76.4%) of cancer retractions were issued in the most recent decade, with 16.6 and 6.7% of the retractions in the prior two decades respectively. Retractions were issued by journals with impact factors ranging from 0 (discontinued) to 55.8. The average impact factor was 5.4 (median 3.54, IQR 1.8-5.5). On average, a retracted article was cited 45 times (median 18, IQR 6-51), with a range of 0-742. Reasons for retraction include plagiarism (14.4%), fraud (28.4%), duplicate publication (18.2%), error (24.2%), authorship issues (3.9%), and ethical issues (2.1%). The reason for retraction was not stated in 9.8% of cases. Twenty-nine percent of retracted articles remain available online in their original form. Retractions in cancer research are increasing in frequency at a similar rate to all biomedical research retractions. Cancer retractions are largely due to academic misconduct. Consequences to cancer patients, the public at large, and the research community can be substantial and should be addressed with future research. Despite the implications of this important issue, some cancer journals currently fall short of the current guidelines for clearly stating the reason for retraction and identifying the publication as retracted.

Surgical orthodontic treatment of an impacted canine in the presence of dens invaginatus and follicular cyst.

PubMed

Spallarossa, Marialuce; Canevello, Carola; Silvestrini Biavati, Francesca; Laffi, Nicola

2014-01-01

Introduction. "Dens invaginatus" is a dental anomaly which originates from the invagination of the ameloblastic epithelium into the lingual surface of the dental crown during the odontogenesis. It can cause early pulpal necrosis, abscesses, retention or dislocation of contiguous elements, cysts, and internal resorptions. It normally affects the upper lateral incisors. In the following study the authors will discuss the etiology, the physiopathology, and the surgical-orthodontic management of a rare case of impacted canine associated with dens invaginatus and follicular cyst, with the aim of highlighting the importance of taking any therapeutic decision based on the data available in the literature. Case Report. The present study describes a combined surgical-orthodontic treatment of an impacted canine associated with a lateral incisor (2.2) suffering from type III dens invaginatus with radicular cyst, in a 15-year-old patient. Discussion. When treating a dens invaginatus there are different therapeutic solutions: they depend on the gravity of the anomaly and on the association with the retention of a permanent tooth. The aesthetic and functional restoration becomes extremely important when performing a surgical-orthodontic repositioning.

Relapse of incisor crowding: a visit to the Prince of Salina.

PubMed

López-Areal, Luis; Gandía, Jose-Luis

2013-03-01

The management of the retention period after comprehensive orthodontic treatment is of great importance, as a primary goal of clinician. Considerable controversy still surrounds the problem of stability after the retention period. Many studies analyze factors associated to the presence of crowding or incisor irregularity and find predictive features on its relapse. Most studies have reported little o no correlation between the treatment changes in the biological parameters - clinical, biometric (irregularity index, intermolar width, intercanine width, arch length, overjet, overbite), or cephalometric variables- that ocurred and the posttretament and postretention changes that may predict their future development. This article provides a bibliographical overview on the relapse of dental alignment in treated cases. In a brief historical introduction, the first studies on the long-term stability of orthodontic results are analysed. The article then goes on to assess studies that focus attention on anteroinferior alignment before finally studying relapse of upper crowding. It concludes by making some final comments in the light of the bibliography provided and the differents schools regarding retention needs and methods.

Use of a Novel ORMOCER as a Universal Direct Restorative Material.

PubMed

Hakim, Foroud; Vallée, Jessie

2018-01-01

Composite resin is considered the material of choice for direct restoration of teeth when esthetic outcome is a high priority. While material science improvements have mitigated many of the traditional liabilities related to composite resin restorations, shrinkage and related shrinkage stress still play a role in outcomes, placement techniques, and overall success. This case report demonstrates two restorative scenarios using an ORMOCER® composite material. The first features a female patient who, upon completion of preliminary orthodontic treatment, determined in consultation with the orthodontist that her central incisors would present more idealistic display and esthetics if they were lengthened by approximately 1.5 mm. The lengthening of the incisors was to precede the phase II refinement with clear aligners, which would aim to extrude the remaining anterior teeth to develop incisal balance and symmetry. The second case is that of a woman who presented with a newly symptomatic upper right second bicuspid with an existing nearly decade old, large MODL composite resin restoration. This article demonstrates the universal nature of the novel direct restorative material used, making it well-suited for both anterior and posterior applications.

Comparison of mesiodistal tooth widths in Caucasian, African and Japanese individuals with Brazilian ancestry and normal occlusion.

PubMed

Fernandes, Thais Maria Freire; Sathler, Renata; Natalício, Gabriela Letícia; Henriques, José Fernando Castanha; Pinzan, Arnaldo

2013-01-01

To observe the presence of sexual dimorphism and compare the mesiodistal width of the teeth in Caucasian, African and Japanese individuals with Brazilian ancestry not orthodontically treated and with normal occlusion. One hundred pairs of dental casts were used. It was measured, from first molar to first molar in both arches, the teeth's mesiodistal widths, using a digital caliper. For the statistical analysis of results Kolmogorov-Smirnov, t test, ANOVA and Tukey's test (p < 0.05) were used. Sexual dimorphism occurred on the three evaluated groups, and the highest mesiodistal widths were found in males. There was statistically significant difference between racial groups in all evaluated teeth in males. However, in females, this same difference was found only on upper lateral incisor and first molar; and lower lateral incisor, canine, first premolar and first molar. Most of mesiodistal measures present particular characteristics in relation to gender, with higher values for males, and to race, with a tendency for African to present greater mesiodistal distance of the teeth, followed by Japanese and Caucasians, respectively, important for the correct diagnosis and orthodontic planning.

Long-term maxillomandibular skeletal and dental changes in children with cleft lip and palate after maxillary distraction.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2006-09-01

Long-term skeletal and dental changes were examined in 8 children with cleft lip and palate who underwent maxillary distraction to allow the maxilla to catch up to their mandibular growth at the treatment point. Changes in the overjet (OJ), overbite (OB), and positions of the anterior nasal spine (ANS), upper incisors (U1), pogonion (Pog), and lower incisors (L1) were measured on preoperative to 36 months postoperative lateral-cephalograms. In most of the children, the long-term changes after the maxillary distraction resulted in an inferior growth of the maxilla and anteroinferior growth of the mandible. This seems to suggest that maxillary distraction performed during childhood needs considerable overcorrection. However, if the maxilla is distracted to an adult position during childhood, the masticatory functions of the children will markedly deteriorate until their jaws grow. Therefore, we believe that one goal of maxillary distraction during childhood can be to allow the maxilla to catch up to the mandibular growth of the children at the treatment point.

Characteristics of Retractions from Korean Medical Journals in the KoreaMed Database: A Bibliometric Analysis

PubMed Central

Cho, Hye-Min

2016-01-01

Background Flawed or misleading articles may be retracted because of either honest scientific errors or scientific misconduct. This study explored the characteristics of retractions in medical journals published in Korea through the KoreaMed database. Methods We retrieved retraction articles indexed in the KoreaMed database from January 1990 to January 2016. Three authors each reviewed the details of the retractions including the reason for retraction, adherence to retraction guidelines, and appropriateness of retraction. Points of disagreement were reconciled by discussion among the three. Results Out of 217,839 articles in KoreaMed published from 1990 to January 2016, the publication type of 111 articles was retraction (0.051%). Of the 111 articles (addressing the retraction of 114 papers), 58.8% were issued by the authors, 17.5% were jointly issued (author, editor, and publisher), 15.8% came from editors, and 4.4% were dispatched by institutions; in 5.3% of the instances, the issuer was unstated. The reasons for retraction included duplicate publication (57.0%), plagiarism (8.8%), scientific error (4.4%), author dispute (3.5%), and other (5.3%); the reasons were unstated or unclear in 20.2%. The degree of adherence to COPE’s retraction guidelines varied (79.8%–100%), and some retractions were inappropriate by COPE standards. These were categorized as follows: retraction of the first published article in the case of duplicate publication (69.2%), authorship dispute (15.4%), errata (7.7%), and other (7.7%). Conclusion The major reason for retraction in Korean medical journals is duplicate publication. Some retractions resulted from overreaction by the editors. Therefore, editors of Korean medical journals should take careful note of the COPE retraction guidelines and should undergo training on appropriate retraction practices. PMID:27706245

Outdoor unit construction for an electric heat pump

DOEpatents

Draper, Robert; Lackey, Robert S.

1984-01-01

The outdoor unit for an electric heat pump is provided with an upper portion 10 containing propeller fan means 14 for drawing air through the lower portion 12 containing refrigerant coil means 16 in the form of four discrete coils connected together in a subassembly forming a W shape, the unit being provided with four adjustable legs 64 which are retracted in shipment, and are adjusted on site to elevate the unit to a particular height suitable for the particular location in which the unit is installed.

Outdoor unit construction for an electric heat pump

DOEpatents

Draper, R.; Lackey, R.S.

1984-09-11

The outdoor unit for an electric heat pump is provided with an upper portion containing propeller fan means for drawing air through the lower portion containing refrigerant coil means in the form of four discrete coils connected together in a subassembly forming a W shape, the unit being provided with four adjustable legs which are retracted in shipment, and are adjusted on site to elevate the unit to a particular height suitable for the particular location in which the unit is installed. 4 figs.

Orthodontic intrusion of maxillary incisors: a 3D finite element method study

PubMed Central

Saga, Armando Yukio; Maruo, Hiroshi; Argenta, Marco André; Maruo, Ivan Toshio; Tanaka, Orlando Motohiro

2016-01-01

Objective: In orthodontic treatment, intrusion movement of maxillary incisors is often necessary. Therefore, the objective of this investigation is to evaluate the initial distribution patterns and magnitude of compressive stress in the periodontal ligament (PDL) in a simulation of orthodontic intrusion of maxillary incisors, considering the points of force application. Methods: Anatomic 3D models reconstructed from cone-beam computed tomography scans were used to simulate maxillary incisors intrusion loading. The points of force application selected were: centered between central incisors brackets (LOAD 1); bilaterally between the brackets of central and lateral incisors (LOAD 2); bilaterally distal to the brackets of lateral incisors (LOAD 3); bilaterally 7 mm distal to the center of brackets of lateral incisors (LOAD 4). Results and Conclusions: Stress concentrated at the PDL apex region, irrespective of the point of orthodontic force application. The four load models showed distinct contour plots and compressive stress values over the midsagittal reference line. The contour plots of central and lateral incisors were not similar in the same load model. LOAD 3 resulted in more balanced compressive stress distribution. PMID:27007765

Retracted articles in surgery journals. What are surgeons doing wrong?

PubMed

Cassão, Bruna Dell'Acqua; Herbella, Fernando A M; Schlottmann, Francisco; Patti, Marco G

2018-06-01

Retraction of previously published scientific articles is an important mechanism to preserve the integrity of scientific work. This study analyzed retractions of previously published articles from surgery journals. We searched for retracted articles in the 100 surgery journals with the highest SJR2 indicator grades. We found 130 retracted articles in 49 journals (49%). Five or more retracted articles were published in 8 journals (8%). The mean time between publication and retraction was 26 months (range 1 to 158 months). The United States, China, Germany, Japan, and the United Kingdom accounted for more than 3 out of 4 of the retracted articles. The greatest number of retractions came from manuscripts about orthopedics and traumatology, general surgery, anesthesiology, cardiothoracic surgery, and plastic surgery. Nonsurgeons were responsible for 16% of retractions in these surgery journals. The main reasons for retraction were duplicate publication (42%), plagiarism (16%), absence of proven integrity of the study (14%), incorrect data (13%), data published without authorization (12%), violation of research ethics (11%), documented fraud (11%), request of an author(s) (5%), and unknown (3%). In 25% of the retracted articles, other publications by the same authors also had been retracted. Retraction of published articles does not occur frequently in surgery journals. Some form of scientific misconduct was present in the majority of retractions, especially duplication of publication and plagiarism. Retractions of previously published articles were most frequent from countries with the greatest number of publications; some authors showed recidivism. Copyright © 2018 Elsevier Inc. All rights reserved.

Why articles are retracted: a retrospective cross-sectional study of retraction notices at BioMed Central

PubMed Central

2016-01-01

Objectives To assess why articles are retracted from BioMed Central journals, whether retraction notices adhered to the Committee on Publication Ethics (COPE) guidelines, and are becoming more frequent as a proportion of published articles. Design/setting Retrospective cross-sectional analysis of 134 retractions from January 2000 to December 2015. Results 134 retraction notices were published during this timeframe. Although they account for 0.07% of all articles published (190 514 excluding supplements, corrections, retractions and commissioned content), the rate of retraction is rising. COPE guidelines on retraction were adhered to in that an explicit reason for each retraction was given. However, some notices did not document who retracted the article (eight articles, 6%) and others were unclear whether the underlying cause was honest error or misconduct (15 articles, 11%). The largest proportion of notices was issued by the authors (47 articles, 35%). The majority of retractions were due to some form of misconduct (102 articles, 76%), that is, compromised peer review (44 articles, 33%), plagiarism (22 articles, 16%) and data falsification/fabrication (10 articles, 7%). Honest error accounted for 17 retractions (13%) of which 10 articles (7%) were published in error. The median number of days from publication to retraction was 337.5 days. Conclusions The most common reason to retract was compromised peer review. However, the majority of these cases date to March 2015 and appear to be the result of a systematic attempt to manipulate peer review across several publishers. Retractions due to plagiarism account for the second largest category and may be reduced by screening manuscripts before publication although this is not guaranteed. Retractions due to problems with the data may be reduced by appropriate data sharing and deposition before publication. Adopting a checklist (linked to COPE guidelines) and templates for various classes of retraction notices would increase transparency of retraction notices in future. PMID:27881524

Retractions in orthopaedic research: A systematic review.

PubMed

Yan, J; MacDonald, A; Baisi, L-P; Evaniew, N; Bhandari, M; Ghert, M

2016-06-01

Despite the fact that research fraud and misconduct are under scrutiny in the field of orthopaedic research, little systematic work has been done to uncover and characterise the underlying reasons for academic retractions in this field. The purpose of this study was to determine the rate of retractions and identify the reasons for retracted publications in the orthopaedic literature. Two reviewers independently searched MEDLINE, EMBASE, and the Cochrane Library (1995 to current) using MeSH keyword headings and the 'retracted' filter. We also searched an independent website that reports and archives retracted scientific publications (www.retractionwatch.com). Two reviewers independently extracted data including reason for retraction, study type, journal impact factor, and country of origin. One hundred and ten retracted studies were included for data extraction. The retracted studies were published in journals with impact factors ranging from 0.000 (discontinued journals) to 13.262. In the 20-year search window, only 25 papers were retracted in the first ten years, with the remaining 85 papers retracted in the most recent decade. The most common reasons for retraction were fraudulent data (29), plagiarism (25) and duplicate publication (20). Retracted articles have been cited up to 165 times (median 6; interquartile range 2 to 19). The rate of retractions in the orthopaedic literature is increasing, with the majority of retractions attributed to academic misconduct and fraud. Orthopaedic retractions originate from numerous journals and countries, indicating that misconduct issues are widespread. The results of this study highlight the need to address academic integrity when training the next generation of orthopaedic investigators.Cite this article: J. Yan, A. MacDonald, L-P. Baisi, N. Evaniew, M. Bhandari, M. Ghert. Retractions in orthopaedic research: A systematic review. Bone Joint Res 2016;5:263-268. DOI: 10.1302/2046-3758.56.BJR-2016-0047. © 2016 Ghert et al.

Retracted Publications in the Biomedical Literature from Open Access Journals.

PubMed

Wang, Tao; Xing, Qin-Rui; Wang, Hui; Chen, Wei

2018-03-07

The number of articles published in open access journals (OAJs) has increased dramatically in recent years. Simultaneously, the quality of publications in these journals has been called into question. Few studies have explored the retraction rate from OAJs. The purpose of the current study was to determine the reasons for retractions of articles from OAJs in biomedical research. The Medline database was searched through PubMed to identify retracted publications in OAJs. The journals were identified by the Directory of Open Access Journals. Data were extracted from each retracted article, including the time from publication to retraction, causes, journal impact factor, and country of origin. Trends in the characteristics related to retraction were determined. Data from 621 retracted studies were included in the analysis. The number and rate of retractions have increased since 2010. The most common reasons for retraction are errors (148), plagiarism (142), duplicate publication (101), fraud/suspected fraud (98) and invalid peer review (93). The number of retracted articles from OAJs has been steadily increasing. Misconduct was the primary reason for retraction. The majority of retracted articles were from journals with low impact factors and authored by researchers from China, India, Iran, and the USA.

How much incisor decompensation is achieved prior to orthognathic surgery?

PubMed

McNeil, Calum; McIntyre, Grant T; Laverick, Sean

2014-07-01

To quantify incisor decompensation in preparation for orthognathic surgery. Pre-treatment and pre-surgery lateral cephalograms for 86 patients who had combined orthodontic and orthognathic treatment were digitised using OPAL 2.1 [http://www.opalimage.co.uk]. To assess intra-observer reproducibility, 25 images were re-digitised one month later. Random and systematic error were assessed using the Dahlberg formula and a two-sample t-test, respectively. Differences in the proportions of cases where the maxillary (1100 +/- 60) or mandibular (900 +/- 60) incisors were fully decomensated were assessed using a Chi-square test (p<0.05). Mann-Whitney U tests were used to identify if there were any differences in the amount of net decompensation for maxillary and mandibular incisors between the Class II combined and Class III groups (p<0.05). Random and systematic error were less than 0.5 degrees and p<0.05, respectively. A greater proportion of cases had decompensated mandibular incisors (80%) than maxillary incisors (62%) and this difference was statistically significant (p=0.029). The amount of maxillary incisor decompensation in the Class II and Class III groups did not statistically differ (p=0.45) whereas the mandibular incisors in the Class III group underwent statistically significantly greater decompensation (p=0.02). Mandibular incisors were decompensated for a greater proportion of cases than maxillary incisors in preparation for orthognathic surgery. There was no difference in the amount of maxillary incisor decompensation between Class II and Class III cases. There was a greater net decompensation for mandibular incisors in Class III cases when compared to Class II cases. Key words:Decompensation, orthognathic, pre-surgical orthodontics, surgical-orthodontic.

Retractions in the scientific literature: is the incidence of research fraud increasing?

PubMed

Steen, R Grant

2011-04-01

Scientific papers are retracted for many reasons including fraud (data fabrication or falsification) or error (plagiarism, scientific mistake, ethical problems). Growing attention to fraud in the lay press suggests that the incidence of fraud is increasing. The reasons for retracting 742 English language research papers retracted from the PubMed database between 2000 and 2010 were evaluated. Reasons for retraction were initially dichotomised as fraud or error and then analysed to determine specific reasons for retraction. Error was more common than fraud (73.5% of papers were retracted for error (or an undisclosed reason) vs 26.6% retracted for fraud). Eight reasons for retraction were identified; the most common reason was scientific mistake in 234 papers (31.5%), but 134 papers (18.1%) were retracted for ambiguous reasons. Fabrication (including data plagiarism) was more common than text plagiarism. Total papers retracted per year have increased sharply over the decade (r=0.96; p<0.001), as have retractions specifically for fraud (r=0.89; p<0.001). Journals now reach farther back in time to retract, both for fraud (r=0.87; p<0.001) and for scientific mistakes (r=0.95; p<0.001). Journals often fail to alert the naïve reader; 31.8% of retracted papers were not noted as retracted in any way. Levels of misconduct appear to be higher than in the past. This may reflect either a real increase in the incidence of fraud or a greater effort on the part of journals to police the literature. However, research bias is rarely cited as a reason for retraction.

Damping ratio analysis of tooth stability under various simulated degrees of vertical alveolar bone loss and different root types.

PubMed

Ho, Kuo-Ning; Lee, Sheng-Yang; Huang, Haw-Ming

2017-08-03

The purpose of this study was to evaluate the feasibility of using damping ratio (DR) analysis combined with resonance frequency (RF) and periotest (PTV) analyses to provide additional information about natural tooth stability under various simulated degrees of alveolar vertical bone loss and various root types. Three experimental tooth models, including upper central incisor, upper first premolar, and upper first molar were fabricated using Ti6Al4V alloy. In the tooth models, the periodontal ligament and alveolar bone were simulated using a soft lining material and gypsum, respectively. Various degrees of vertical bone loss were simulated by decreasing the surrounding bone level apically from the cementoenamel junction in 2-mm steps incrementally downward for 10 mm. A commercially available RF analyzer was used to measure the RF and DR of impulse-forced vibrations on the tooth models. The results showed that DRs increased as alveolar vertical bone height decreased and had high coefficients of determination in the linear regression analysis. The damping ratio of the central incisor model without a simulated periodontal ligament were 11.95 ± 1.92 and 27.50 ± 0.67% respectively when their bone levels were set at 2 and 10 mm apically from the cementoenamel junction. These values significantly changed to 28.85 ± 2.54% (p = 0.000) and 51.25 ± 4.78% (p = 0.003) when the tooth model was covered with simulated periodontal ligament. Moreover, teeth with different root types showed different DR and RF patterns. Teeth with multiple roots had lower DRs than teeth with single roots. Damping ratio analysis combined with PTV and RF analysis provides more useful information on the assessment of changes in vertical alveolar bone loss than PTV or RF analysis alone.

BCL11B Regulates Epithelial Proliferation and Asymmetric Development of the Mouse Mandibular Incisor

PubMed Central

Kyrylkova, Kateryna; Kyryachenko, Sergiy; Biehs, Brian; Klein, Ophir; Kioussi, Chrissa; Leid, Mark

2012-01-01

Mouse incisors grow continuously throughout life with enamel deposition uniquely on the outer, or labial, side of the tooth. Asymmetric enamel deposition is due to the presence of enamel-secreting ameloblasts exclusively within the labial epithelium of the incisor. We have previously shown that mice lacking the transcription factor BCL11B/CTIP2 (BCL11B hereafter) exhibit severely disrupted ameloblast formation in the developing incisor. We now report that BCL11B is a key factor controlling epithelial proliferation and overall developmental asymmetry of the mouse incisor: BCL11B is necessary for proliferation of the labial epithelium and development of the epithelial stem cell niche, which gives rise to ameloblasts; conversely, BCL11B suppresses epithelial proliferation, and development of stem cells and ameloblasts on the inner, or lingual, side of the incisor. This bidirectional action of BCL11B in the incisor epithelia appears responsible for the asymmetry of ameloblast localization in developing incisor. Underlying these spatio-specific functions of BCL11B in incisor development is the regulation of a large gene network comprised of genes encoding several members of the FGF and TGFβ superfamilies, Sprouty proteins, and Sonic hedgehog. Our data integrate BCL11B into these pathways during incisor development and reveal the molecular mechanisms that underlie phenotypes of both Bcl11b−/− and Sprouty mutant mice. PMID:22629441

Comparison of Ferric Sulfate Combined Mineral Trioxide Aggregate Pulpotomy and Zinc Oxide Eugenol Pulpectomy of Primary Maxillary Incisors: An 18-month Randomized, Controlled Trial.

PubMed

Nguyen, Trang D; Judd, Peter L; Barrett, Edward J; Sidhu, Nicole; Casas, Michael J

2017-01-15

The purpose of this study was to compare outcomes and survival of ferric sulfate with mineral trioxide aggregate (FS+MTA) pulpotomy and root canal therapy (RCT) in carious vital primary maxillary incisors. In this parallel group noninferiority trial, asymptomatic carious vital primary incisors with pulp exposure in healthy 18- to 46-month-olds were allocated randomly to receive FS+MTA pulpotomy or RCT between September 2010 and September 2012. Each incisor was classified into one of the following radiographic outcomes: N (incisor without pathologic change); Po (pathologic change present, follow-up recommended); Px (pathologic change present, extract.) Clinical findings and incisor survival were secondary outcomes. Seventy subjects were enrolled with a total of 172 incisors. Twelve- and 18-month radiographic outcomes demonstrated no statistical difference between FS+MTA pulpotomy and RCT incisors for Px outcomes (P=0.38; odds ratio equals 0.60; 95 percent confidence interval equals 0.19 to 1.89; chi-square test). There was no statistical differences in clinical outcomes for FS+MTA pulpotomy and RCT at 12 and 18 months (P=0.51; Fisher's exact test) or survival for FS+MTA pulpotomy and RCT incisors (P=0.11; log-rank test). Ferric Sulfate with Mineral Trioxide Aggregate (FS+MTA) is an alternative to RCT for vital primary incisors.

A comparison of the treatment effects of the Forsus Fatigue Resistance Device and the Twin Block appliance in patients with class II malocclusions

PubMed Central

Hanoun, Abdulfatah; Al-Jewair, Thikriat S; Tabbaa, Sawsan; Allaymouni, Mhd Amer; Preston, Charles B

2014-01-01

Objectives We evaluated the skeletal and dentoalveolar effects of the Forsus Fatigue Resistance Device (FRD) and the Twin Block appliance (TB) in comparison with nontreated controls in the treatment of patients with class II division 1 malocclusion. Materials and methods This retrospective study included three groups: TB (n=37; mean age, 11.2 years), FRD (n=30; mean age, 12.9 years), and controls (n=25; mean age, 12.6 years). Lateral cephalograms were evaluated at T1 (pretreatment) and at T2 (postappliance removal/equivalent time frame in controls). Cephalometric changes were evaluated using the Clark analysis, including 27 measurements. Results Sagittal correction of class II malocclusion appeared to be mainly achieved by dentoalveolar changes in the FRD group. The TB was able to induce both skeletal and dentoalveolar changes. A favorable influence on facial convexity was achieved by both groups. Significant upper incisor retroclination occurred with the TB (−12.42°), whereas only −4° was observed in the FRD group. The lower incisors proclined more in the FRD group than the TB group. Incisor overjet reduction was 62% in the TB group versus 56% in the FRD group. Molar relation was corrected in both functional groups, resulting in a class I relation, although no change appeared in the control sample. Conclusion Both appliances were effective in correcting the class II malocclusion. Both the FRD and the TB induced significant maxillary and mandibular dentoalveolar changes; skeletal changes were induced by TB but not FRD therapy. PMID:25114591

A comparison of the treatment effects of the Forsus Fatigue Resistance Device and the Twin Block appliance in patients with class II malocclusions.

PubMed

Hanoun, Abdulfatah; Al-Jewair, Thikriat S; Tabbaa, Sawsan; Allaymouni, Mhd Amer; Preston, Charles B

2014-01-01

We evaluated the skeletal and dentoalveolar effects of the Forsus Fatigue Resistance Device (FRD) and the Twin Block appliance (TB) in comparison with nontreated controls in the treatment of patients with class II division 1 malocclusion. THIS RETROSPECTIVE STUDY INCLUDED THREE GROUPS: TB (n=37; mean age, 11.2 years), FRD (n=30; mean age, 12.9 years), and controls (n=25; mean age, 12.6 years). Lateral cephalograms were evaluated at T1 (pretreatment) and at T2 (postappliance removal/equivalent time frame in controls). Cephalometric changes were evaluated using the Clark analysis, including 27 measurements. Sagittal correction of class II malocclusion appeared to be mainly achieved by dentoalveolar changes in the FRD group. The TB was able to induce both skeletal and dentoalveolar changes. A favorable influence on facial convexity was achieved by both groups. Significant upper incisor retroclination occurred with the TB (-12.42°), whereas only -4° was observed in the FRD group. The lower incisors proclined more in the FRD group than the TB group. Incisor overjet reduction was 62% in the TB group versus 56% in the FRD group. Molar relation was corrected in both functional groups, resulting in a class I relation, although no change appeared in the control sample. Both appliances were effective in correcting the class II malocclusion. Both the FRD and the TB induced significant maxillary and mandibular dentoalveolar changes; skeletal changes were induced by TB but not FRD therapy.

Frequency and variability of dental morphology in deciduous and permanent dentition of a Nasa indigenous group in the municipality of Morales, Cauca, Colombia.

PubMed

Díaz, Eider; García, Lorena; Hernández, Michelle; Palacio, Lesly; Ruiz, Diana; Velandia, Nataly; Villavicencio, Judy; Moreno, Freddy

2014-01-01

To determine the frequency, variability, sexual dimorphism and bilateral symmetry of fourteen dental crown traits in the deciduous and permanent dentition of 60 dental models (35 women and 25 men) obtained from a native, indigenous group of Nasa school children of the Musse Ukue group in the municipality of Morales, Department of Cauca, Colombia. This is a quantitative, descriptive, cross-sectional study that characterizes dental morphology by means of the systems for temporary dentition from Dahlberg (winging), and ASUDAS (crowding, reduction of hypocone, metaconule and cusp 6), Hanihara (central and lateral incisors in shovel-shape and cusp 7), Sciulli (double bit, layered fold protostylid, cusp pattern and cusp number) and Grine (Carabelli trait); and in permanent dentition from ASUDAS (Winging, crowding, central and lateral incisors in shovel-shape and double shovel-shape, Carabelli trait, hypocone reduction, metaconule, cusp pattern, cusp number, layered fold protostylid, cusp 6 and cusp 7). The most frequent dental crown features were the shovel-shaped form, grooved and fossa forms of the Carabelli trait, metaconule, cusp pattern Y6, layered fold, protostylid (point P) and cusp 6. Sexual dimorphism was not observed and there was bilateral symmetry in the expression of these features. The sample studied presented a great affinity with ethnic groups belonging to the Mongoloid Dental Complex due to the frequency (expression) and variability (gradation) of the tooth crown traits, upper incisors, the Carabelli trait, the protostylid, cusp 6 and cusp 7. The influence of the Caucasoide Dental Complex associated with ethno-historical processes cannot be ruled out.

Why articles are retracted: a retrospective cross-sectional study of retraction notices at BioMed Central.

PubMed

Moylan, Elizabeth C; Kowalczuk, Maria K

2016-11-23

To assess why articles are retracted from BioMed Central journals, whether retraction notices adhered to the Committee on Publication Ethics (COPE) guidelines, and are becoming more frequent as a proportion of published articles. Retrospective cross-sectional analysis of 134 retractions from January 2000 to December 2015. 134 retraction notices were published during this timeframe. Although they account for 0.07% of all articles published (190 514 excluding supplements, corrections, retractions and commissioned content), the rate of retraction is rising. COPE guidelines on retraction were adhered to in that an explicit reason for each retraction was given. However, some notices did not document who retracted the article (eight articles, 6%) and others were unclear whether the underlying cause was honest error or misconduct (15 articles, 11%). The largest proportion of notices was issued by the authors (47 articles, 35%). The majority of retractions were due to some form of misconduct (102 articles, 76%), that is, compromised peer review (44 articles, 33%), plagiarism (22 articles, 16%) and data falsification/fabrication (10 articles, 7%). Honest error accounted for 17 retractions (13%) of which 10 articles (7%) were published in error. The median number of days from publication to retraction was 337.5 days. The most common reason to retract was compromised peer review. However, the majority of these cases date to March 2015 and appear to be the result of a systematic attempt to manipulate peer review across several publishers. Retractions due to plagiarism account for the second largest category and may be reduced by screening manuscripts before publication although this is not guaranteed. Retractions due to problems with the data may be reduced by appropriate data sharing and deposition before publication. Adopting a checklist (linked to COPE guidelines) and templates for various classes of retraction notices would increase transparency of retraction notices in future. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Retractions in orthopaedic research

PubMed Central

Yan, J.; MacDonald, A.; Baisi, L-P.; Evaniew, N.; Bhandari, M.

2016-01-01

Objectives Despite the fact that research fraud and misconduct are under scrutiny in the field of orthopaedic research, little systematic work has been done to uncover and characterise the underlying reasons for academic retractions in this field. The purpose of this study was to determine the rate of retractions and identify the reasons for retracted publications in the orthopaedic literature. Methods Two reviewers independently searched MEDLINE, EMBASE, and the Cochrane Library (1995 to current) using MeSH keyword headings and the ‘retracted’ filter. We also searched an independent website that reports and archives retracted scientific publications (www.retractionwatch.com). Two reviewers independently extracted data including reason for retraction, study type, journal impact factor, and country of origin. Results One hundred and ten retracted studies were included for data extraction. The retracted studies were published in journals with impact factors ranging from 0.000 (discontinued journals) to 13.262. In the 20-year search window, only 25 papers were retracted in the first ten years, with the remaining 85 papers retracted in the most recent decade. The most common reasons for retraction were fraudulent data (29), plagiarism (25) and duplicate publication (20). Retracted articles have been cited up to 165 times (median 6; interquartile range 2 to 19). Conclusion The rate of retractions in the orthopaedic literature is increasing, with the majority of retractions attributed to academic misconduct and fraud. Orthopaedic retractions originate from numerous journals and countries, indicating that misconduct issues are widespread. The results of this study highlight the need to address academic integrity when training the next generation of orthopaedic investigators. Cite this article: J. Yan, A. MacDonald, L-P. Baisi, N. Evaniew, M. Bhandari, M. Ghert. Retractions in orthopaedic research: A systematic review. Bone Joint Res 2016;5:263–268. DOI: 10.1302/2046-3758.56.BJR-2016-0047. PMID:27354716

Characteristics of retractions related to faked peer reviews: an overview.

PubMed

Qi, Xingshun; Deng, Han; Guo, Xiaozhong

2017-08-01

A faked peer review is a novel cause for retraction. We reviewed the characteristics of papers retracted due to a faked peer review. All papers retracted due to faked peer reviews were identified by searching the Retraction Watch website and by conducting a manual search. All identified papers were confirmed in published journals. The information of retracted papers was collected, which primarily included publisher, journal, journal impact factor, country, as well as publication and retraction year. Overall, 250 retracted papers were identified. They were published in 48 journals by six publishers. The top 5 journals included the Journal of Vibration and Control (24.8%), Molecular Biology Reports (11.6%), Immunopharmacology and Immunotoxicology (8.0%), Tumour Biology (6.8%) and European Journal of Medical Research (6.4%). The publishers included SAGE (31%), Springer (26%), BioMed Central (18%), Elsevier (13%), Informa (11%) and LWW (1%). A minority (4%) of retracted papers were published in Science Citation Index (SCI) journals with an impact factor of >5. A majority (74.8%) of retracted papers were written by Chinese researchers. In terms of the publication year, the retracted papers were published since 2010, and the number of retracted papers peaked in 2014 (40.8%). In terms of the retraction year, the retractions started in 2012, and the number of retractions peaked in 2015 (59.6%). The number of papers retracted due to faked peer reviews differs largely among journals and countries. With the improvement of the peer review mechanism and increased education about publishing ethics, such academic misconduct may gradually disappear in future. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Arthroscopic repair of the rotator cuff: prospective study of tendon healing after 70 years of age in 145 patients.

PubMed

Flurin, P-H; Hardy, P; Abadie, P; Boileau, P; Collin, P; Deranlot, J; Desmoineaux, P; Duport, M; Essig, J; Godenèche, A; Joudet, T; Kany, J; Sommaire, C; Thelu, C-E; Valenti, P

2013-12-01

The level of activity of patients older than 70 years is tending to increase, as are their expectations in terms of joint function recuperation. It has not been proven that rotator cuff repair healing is satisfactory in the elderly. The main hypothesis of this study was: repair of supraspinous lesions in patients older than 70 years is reliable in terms of both clinical results and healing. The secondary hypothesis was: tendon healing is significantly correlated with the Constant, ASES, and SST scores as well as with age, tendon retraction, and fatty infiltration. Multicenter prospective study on 145 patients older than 70 years, with 135 patients reviewed at 1 year (93%). The mean age was 73.9 years. Full-thickness tears of the supraspinatus extended at most to the upper third of the infraspinatus and retraction limited to Patte stages 1 and 2 were included. Clinical assessment was carried out in accordance with the Constant, ASES, and SST scores. Healing was evaluated with ultrasound. A significant improvement was noted in the Constant (44/76)+31.5 (P<0.0001), ASES (35/90)+54.4 (P<0.0001), and SST (3.5/10)+6.6 (P>0.0001) scores at 1 year of follow-up. The healing rate was 89% with 15 re-tears, nine of which were stage 1 and six stage 2. The clinical result was not correlated with patient age (Constant, P=0.24; ASES, P=0.38; SST, P=0.83) nor with the retraction stage (Constant, P=0.71; ASES, P=0.35; SST, P=0.69) or the stage of fatty infiltration (P>0.7). Healing was correlated with the quality of the clinical result (Constant, P=0.02; ASES, P=0.03) and age (P=0.01) but was not correlated with retraction or the fatty infiltration stage (P>0.3). Arthroscopic repair significantly improves the clinical results, even in patients older than 70 years. The clinical results are not correlated with age (but deterioration of the result was not noted after 75 years) or frontal retraction (but the study only included retractions limited to stages 1 and 2). The healing rate is satisfactory, but this study is limited to small ruptures of the supraspinatus, and the postoperative ultrasound analysis probably inferior to CT imaging with contrast agent injection, often used as the reference. Healing proves to be correlated with the quality of the clinical result and patient age. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Comparative study of the craniofacial growth depending on the type of lactation received.

PubMed

Sánchez-Molins, M; Grau Carbó, J; Lischeid Gaig, C; Ustrell Torrent, J M

2010-06-01

Several organizations consider mother's milk the optimal nutrition source for newborns [AAP, 1998; Gartner et al., 1997; Mohrbacher and Stock, 2002; WHO, 1989]. However, there is little scientific evidence supporting the idea that breastfeeding has a positive influence on the development of the orofacial structures. The study of cases and controls (observational, analytical and retrospective) and lateral teleradiographs of the cranium of 197 patients (106 breast-fed and 91 bottle-fed) were compared. Ricketts, Steiner and McNamara values were used for the cephalometric analysis. Differences between the two groups were analysed by applying the T-test and ANOVA. Statistical significance levels were set at p<0.05. Non-nutritive infantile sucking habits have been compared; differences between the two groups were analysed by applying the Chi-square test. First, the upper incisors were found to be protruded in the bottle-fed group. Second, subjects belonging to the breast-fed group displayed a brachycephalic mandible arch, while those fed with bottle had a dolichocephalic Steiner mandibular plane. Third, both facial depth and distance of the pogonion to the perpendicular nasion presented a certain tendency to a retruded mandibular bone in the bottle-fed group. And fourth, the frequency of use of dummy and thumb suction were greater in the bottle feed group, without statistical significance. In addition to the multiple advantages that mother's milk offers to newborns, breastfeeding also helps correct orofacial development (not only for the incisors position, but also for the vertical and sagittal relations of the mandible with upper maxillary and cranial basis).

Tissue Engineering of Necrotic Dental Pulp of Immature Teeth with Apical Periodontitis in Dogs: Radiographic and Histological Evaluation.

PubMed

El Ashiry, Eman A; Alamoudi, Najlaa M; El Ashiry, Mahmoud K; Bastawy, Hagar A; El Derwi, Douaa A; Atta, Hazem M

2018-05-15

To evaluate tissue engineering technology to regenerate pulp-dentin like tissues in pulp canals of immature necrotic permanent teeth with apical periodontitis in dogs. The study was performed on 36 teeth in 12 dogs. The experiment was carried out using split mouth design. In each dog 3 teeth were selected for implementing the study procedure. Apical periodontitis was induced in Group A and B teeth. Group (A): immature upper left 2 nd permanent incisors that were transplanted with a construct of autologous dental pulp stem cells with growth factors seeded in a chitosn hydrogel scaffold. Group (B): immature upper right 2 nd permanent incisor that received only growth factors with scaffold. A third tooth in each dog was selected randomly for isolation of dental pulp stem cells (DPSCs). Both groups were closed with a double coronal seal of white MTA (Mineral trioxide aggregate) and glass ionomer cement. Both groups were monitored radiographically for 4 months and histologically after sacrificing the animals. There was no statistically significant difference in radiographic findings between group (A) and group (B) for healing of radiolucencies, while there was statistically significant difference between group (A) and group (B) regarding radicular thickening, root lengthening and apical closure. Histologically, group (A) teeth showed regeneration of pulp-dentin like tissue while group (B) teeth did not show any tissue regeneration. Dental pulp stem cells and growth factors incorporated in chitosan hydrogel are able to regenerate pulp-dentine like tissue and help in complete root maturation of non-vital immature permanent teeth with apical periodontitis in dogs.

[Treatment of adult bimaxillary arch protrusion with micro-implant anchorage].

PubMed

Chen, Cheng; Zhang, Xiao-Rong

2015-02-01

In this study, micro-implants were used in 15 adult patients with mild and moderate bimaxillary arch protrusion or crowding. Cephalometric analysis was used to analyze hard and soft-tissues change before and after treatment, with the aim to investigate the effects of treatment on adult bimaxillary arch protrusion with micro-implant anchorage. Fifteen adult patients with mild and moderate bimaxillary arch protrusion were selected in this study. Micro-implants were inserted into the zygomaticoalveolar ridge of maxilla and the external oblique line of mandible. A NiTi coil spring was attached to the micro-implant to drag the whole upper and lower dentition for distal movement. Cephalometrics were taken before and after treatment, and the changes of soft and hard-tissue profile were studied. SPSS13.0 software package was used to analyze the data. (1)Sixty micro-implants remained stable.(2)SNA, SNB had no significant changes (P>0.05), and the relationship between the maxilla and the mandible did not change significantly. U1/NA, U1-NA, L1/NB, L1-NB and U1/L1 changes in hard tissue had significant difference in cephalometric measurement (P<0.05). The upper and lower anterior teeth were more retrusive, and the tipping of incisor decreased significantly.(3)Cephalometric analysis showed that lateral appearance improved and soft tissue cephalometric-related measurements such as Cm-Sn-UL,LL-B'-Pos increased significantly (P<0.01). (4)Molars and incisors acquired distal movement. Micro-implant can provide not only excellent skeletal anchorage but also a novel way to distalize the whole dentition efficiently.

Dimensional accuracy of ceramic self-ligating brackets and estimates of theoretical torsional play.

PubMed

Lee, Youngran; Lee, Dong-Yul; Kim, Yoon-Ji R

2016-09-01

To ascertain the dimensional accuracies of some commonly used ceramic self-ligation brackets and the amount of torsional play in various bracket-archwire combinations. Four types of 0.022-inch slot ceramic self-ligating brackets (upper right central incisor), three types of 0.018-inch ceramic self-ligating brackets (upper right central incisor), and three types of rectangular archwires (0.016 × 0.022-inch beta-titanium [TMA] (Ormco, Orange, Calif), 0.016 × 0.022-inch stainless steel [SS] (Ortho Technology, Tampa, Fla), and 0.019 × 0.025-inch SS (Ortho Technology)) were measured using a stereomicroscope to determine slot widths and wire cross-sectional dimensions. The mean acquired dimensions of the brackets and wires were applied to an equation devised by Meling to estimate torsional play angle (γ). In all bracket systems, the slot tops were significantly wider than the slot bases (P < .001), yielding a divergent slot profile. Clarity-SLs (3M Unitek, Monrovia, Calif) showed the greatest divergence among the 0.022-inch brackets, and Clippy-Cs (Tomy, Futaba, Fukushima, Japan) among the 0.018-inch brackets. The Damon Clear (Ormco) bracket had the smallest dimensional error (0.542%), whereas the 0.022-inch Empower Clear (American Orthodontics, Sheboygan, Wis) bracket had the largest (3.585%). The largest amount of theoretical play is observed using the Empower Clear (American Orthodontics) 0.022-inch bracket combined with the 0.016 × 0.022-inch TMA wire (Ormco), whereas the least amount occurs using the 0.018 Clippy-C (Tomy) combined with 0.016 × 0.022-inch SS wire (Ortho Technology).

Relationship between dental anomalies and orthodontic root resorption of upper incisors.

PubMed

Van Parys, Katrien; Aartman, Irene H A; Kuitert, Reinder; Zentner, Andrej

2012-10-01

The aim of this study was to examine the potential relationship between the occurrence of orthodontic root resorption and presence of dental anomalies such as tooth agenesis and pipette-shaped roots. Dental anomalies and root resorption were assessed on dental panoramic tomographs (DPT) of 88 subjects, 27 males and 61 females, mean age 28.4 (SD = 11.3 years), selected from orthodontic patients on the basis of the following exclusion criteria: previous fixed appliance treatment, bad quality of the DPTs and no visibility of the periodontal ligament of every tooth, and younger than 15 years of age at the onset of treatment with fixed edgewise appliance lasting at least 18 months. A pipette-shaped root was identified as defined by a drawing. Tooth agenesis was assessed on DPTs and from subjects' dental history. Root resorption was calculated as the difference between the root length before and after treatment, with and without a correction factor (crown length post-treatment/crown length pre-treatment). If one of the four upper incisors showed root resorption of ≥2.3 mm with both formulas, the patient was scored as having root resorption. Chi-square tests indicated that there was no relationship between orthodontic root resorption and agenesis (P = 0.885) nor between orthodontic root resorption and pipette-shaped roots (P = 0.800). There was no relationship between having one of the anomalies and root resorption either (P = 0.750). In the present study, it was not possible to confirm on DPTs a relationship between orthodontic root resorption and dental anomalies, such as agenesis and pipette-shaped roots.

Influence of transmucosal height in abutments of single and multiple implant-supported prostheses: a non-linear three-dimensional finite element analysis.

PubMed

Borie, Eduardo; Leal, Eduardo; Orsi, Iara Augusta; Salamanca, Carlos; Dias, Fernando José; Weber, Benjamin

2018-01-01

The aim of this study was to analyze the influence of three different transmucosal heights of the abutments in single and multiple implant-supported prostheses through the finite element method. External hexagon implants, MicroUnit, and EsthetiCone abutments were scanned and placed in an edentulous maxillary model obtained from a tomography database. The simulations were divided into two groups: (1) one implant with 3.75 × 10 mm placed in the upper central incisor, simulating a single implant-supported fixed prosthesis with an EsthetiCone abutment; and (2) two implants with 3.75 × 10 mm placed in the upper lateral incisors with MicroUnit abutments, simulating a multiple implant-supported prosthesis. Subsequently, each group was subdivided into three models according to the transmucosal height (1, 2, and 3 mm). A static oblique load at an angle of 45 degrees to the long axis of the implant in palatal-buccal direction of 150 and 75 N was applied for multiple and single implant-supported prosthesis, respectively. The implants and abutments were assessed according to the equivalent Von Mises stress analyses while the bone and ceramics were analyzed through maximum and minimum principal stresses. The total deformation values increased in all models, while the transmucosal height was augmented. The transmucosal height of the abutments influences the stress values at the bone, ceramics, implants, and abutments of both the single and multiple implant-supported prostheses, with the transmucosal height of 1 mm showing the lowest stress values.

Clinical and endoscopic findings in the mucosae of the upper respiratory and digestive tracts in post-treatment follow-up of paracoccidioidomycosis patients.

PubMed

do Valle, A C; Aprigliano Filho, F; Moreira, J S; Wanke, B

1995-01-01

Systematic examination of the upper respiratory and digestive tracts (URDT) was performed in a group of 80 paracoccidioidomycosis (PCM) patients submitted to post-treatment follow-up ranging from 8 months to 17 years. Mucosae of the URDT had been involved prior to specific treatment in 74 patients, distributed as follows: oropharynx, 50 (41 alone, 7 in association with the larynx, and 2 with the nasal mucosa); larynx, 30 (23 alone and 7 in association); and nasal mucosa, 3 (1 alone and 2 in association). Inactive lesions were observed in all the 50 patients with lesions of the oropharynx, 3 of whom with deforming scars (1 with retraction of the tongue and 2 with narrowing of the oral orifice). One case presented a destructive lesion, with perfuration of the palate. Of the other 46 cases, examination showed nacreous white striated scars which were nearly imperceptible in some cases and in others displayed partial retraction of anatomical structures without any alteration of their features. Patients presented a high rate of missing teeth. In 3 patients with involvement of the nasal mucosa, none of whom presented active PCM lesions, 2 still had nasal voices. In 30 patients with lesions of the larynx, 1 suffered a relapse of PCM and 2 developed epidermoid carcinoma. Of the other 27 cases, none of whom had active PCM lesions, 15 presented dysphonia, 3 were tracheotomized, and 9 were asymptomatic.

Comparative evaluation of the amount of gingival displacement produced by three different gingival retraction systems: An in vivo study.

PubMed

Chaudhari, Jignesh; Prajapati, Paranjay; Patel, Jayanti; Sethuraman, Rajesh; Naveen, Y G

2015-01-01

Tetrahydrozoline has been introduced as new gingival retraction agent but its clinical efficacy with widely used conventional retraction agents has not been tested. The study was designed to clinically evaluate efficacy of newer retraction agent tetrahydrozoline with two widely used retraction systems i.e., Expasyl retraction system and medicated retraction cords on basis of amount of gingival retraction. 30 subjects were selected according to inclusion and exclusion criteria. Maxillary Impressions were made with irreversible hydrocolloid for all subjects. Tray material was used for making the special tray. Latin Block Design was Used in the Study to avoid tissue fatigue. Retraction was done with aluminium chloride; Tetrahydrozoline and Expasyl according to Latin block design. Impressions were poured with die stone. Casts were retrieved and sections were made with die cutter. 3 mm thin slices were obtained. Each slice was used to measure the amount of retraction under stereomicroscope under 20x and images were transferred to image analyser. The amount of gingival retraction obtained by using aluminium chloride as gingival retraction agent was maximum (148238.33 μm(2)) compared to tetrahydrozoline (140737.87 μm(2)) and Expasyl (67784.90 μm(2)).

Retracted publications in the drug literature.

PubMed

Samp, Jennifer C; Schumock, Glen T; Pickard, A Simon

2012-07-01

Recent studies have suggested an increase in the number of retracted scientific publications. It is unclear how broadly the issue of misleading and fraudulent publications pertains to retractions of drug therapy studies. Therefore, we sought to determine the trends and factors associated with retracted publications in drug therapy literature. A PubMed search was conducted to identify retracted drug therapy articles published from 2000-2011. Articles were grouped according to reason for retraction, which was classified as scientific misconduct or error. Scientific misconduct was further divided into data fabrication, data falsification, questions of data veracity, unethical author conduct, and plagiarism. Error was defined as duplicate publication, scientific mistake, journal error, or unstated reasons. Additional data were extracted from the retracted articles, including type of article, funding source, author information, therapeutic area, and retraction issue. A total of 742 retractions were identified from 2000-2011 in the general biomedical literature, and 102 drug studies met our inclusion criteria. Of these, 73 articles (72%) were retracted for a reason classified as scientific misconduct, whereas 29 articles (28%) were retracted for error. Among the 73 articles classified as scientific misconduct, those classified as unethical author conduct (32 articles [44%]) and data fabrication (24 articles [33%]) constituted the majority. The median time from publication of the original article to retraction was 31 months (range 1-130). Fifty percent of retracted articles did not state a funding source, whereas pharmaceutical manufacturer funding accounted for only 13 articles (13%) analyzed. Many retractions were due to repeat offenses by a small number of authors, with nearly 40% of the retracted studies associated with two individuals. We found that a greater proportion of drug therapy articles were retracted for reasons of misconduct and fraud compared with other biomedical studies. It is important for health care practitioners to monitor the literature for retractions so that recommendations for drug therapy and patient management may be modified accordingly. © 2012 Pharmacotherapy Publications, Inc. All rights reserved.

Comparison of in-vivo failure of single-thread and dual-thread temporary anchorage devices over 18 months: A split-mouth randomized controlled trial.

PubMed

Durrani, Owais Khalid; Shaheed, Sohrab; Khan, Arsalan; Bashir, Ulfat

2017-10-01

The purpose of this study was to compare the in-vivo failure rates of single-thread and dual-thread temporary anchorage device (TAD) designs over 18 months. Thirty patients with skeletal Class II Division 1 malocclusion requiring anchorage from TADs for retraction of maxillary incisors into the extracted premolar space were recruited in this parallel group, split-mouth, randomized controlled trial. A block randomization sequence was generated with Random Allocation Software (version 2.0; Isfahan, Iran) with the allocations concealed in sequentially numbered, opaque, sealed envelopes. A total of 60 TADs (diameter, 2 mm; length, 10 mm) were placed in the maxillary arches of these patients with random allocation of the 2 types to the left and the right sides in a 1:1 ratio. All TADs were placed between the roots of the second premolar and the first molar and were immediately loaded. Patients were followed for a minimum of 12 months and a maximum of 18 months for the failure of the TADs. Data were analyzed blindly on an intention-to-treat basis. Four TADs (13.3%) failed in the single-thread group, and 6 TADs (20%) failed in the dual-thread group. The McNemar test showed an insignificant difference (P = 0.72) between the 2 groups. An odds ratio of 1.6 (95% confidence interval, 0.39-6.97) showed no significant associations among the variables. Most TADs failed in the first month after insertion (50%). The failure rate of dual-thread TADs compared with single-thread TADs is statistically insignificant when placed in the maxilla for retraction of the anterior segment. Registration: The trial was not registered before commencement. The protocol was not published before the trial. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

In Vivo Measurement of Surface Pressures and Retraction Distances Applied on Abdominal Organs During Surgery.

PubMed

Shah, Dignesh; Alderson, Andrew; Corden, James; Satyadas, Thomas; Augustine, Titus

2018-02-01

This study undertook the in vivo measurement of surface pressures applied by the fingers of the surgeon during typical representative retraction movements of key human abdominal organs during both open and hand-assisted laparoscopic surgery. Surface pressures were measured using a flexible thin-film pressure sensor for 35 typical liver retractions to access the gall bladder, 36 bowel retractions, 9 kidney retractions, 8 stomach retractions, and 5 spleen retractions across 12 patients undergoing open and laparoscopic abdominal surgery. The maximum and root mean square surface pressures were calculated for each organ retraction. The maximum surface pressures applied to these key abdominal organs are in the range 1 to 41 kPa, and the average maximum surface pressure for all organs and procedures was 14 ± 3 kPa. Surface pressure relaxation during the retraction hold period was observed. Generally, the surface pressures are higher, and the rate of surface pressure relaxation is lower, in the more confined hand-assisted laparoscopic procedures than in open surgery. Combined video footage and pressure sensor data for retraction of the liver in open surgery enabled correlation of organ retraction distance with surface pressure application. The data provide a platform to design strategies for the prevention of retraction injuries. They also form a basis for the design of next-generation organ retraction and space creation surgical devices with embedded sensors that can further quantify intraoperative retraction forces to reduce injury or trauma to organs and surrounding tissues.

Male genital representation in paleolithic art: erection and circumcision before history.

PubMed

Angulo, Javier C; García-Díez, Marcos

2009-07-01

To report on the likely existing evidence about the practice of circumcision in prehistory, or at least a culture of foreskin retraction, and also the meaning of erection in Paleolithic minds. The origin of the ritual of circumcision has been lost in time. Similarly, the primitive anthropologic meaning of erection is undefined. We studied the archeologic and artistic evidence regarding human representations performed during the Upper Paleolithic period, 38,000 to 11,000 years BCE, in Europe, with a focus on genital male representations in portable and rock art. Drawings, engravings, and sculptures displaying humans are relatively scarce, and <100 examples of male genitals are specifically represented. Some depict a circumcised penis and other represent urologic disorders such as phimosis, paraphimosis, discharge, priapism, or a scrotal mass. In addition, a small number of phalluses carved in horn, bone, or stone, with varying morphology, has survived to the present and also reveals a sustained cult for male erection and foreskin retraction not limited to a particular topographical territory. The very few noncoital human or humanoid figures with marked erection appear in a context of serious danger or death. Therefore, erection could be understood as a phenomenon related to the shamanic transit between life and death. The erection in Paleolithic art is explicitly represented in almost all the figures defined as unequivocally male that have survived to the present and in many objects of portable art. Circumcision and/or foreskin retraction of the penis are present in most of the works.

Variation in Size and Form between Left and Right Maxillary Central Incisor Teeth.

PubMed

Vadavadagi, Suneel V; Hombesh, M N; Choudhury, Gopal Krishna; Deshpande, Sumith; Anusha, C V; Murthy, D Kiran

2015-02-01

To compare the variation in size of left and right maxillary central incisors for male patients (using digital calipers of 0.01 mm accuracy). To compare the variation in size of left and right maxillary central incisors for female patients (using digital calipers of 0.01 mm accuracy). To find out the difference between the maxillary central incisors of men and women. Its clinical applicability if difference exists. A total of 70 dental students of PMNM Dental College and Hospital were selected. Of 70 dental students, 40 male and 30 female were selected. Impressions were made for all subjects, using irreversible hydrocolloid (Algitex, manufacturer DPI, Batch-T-8804) using perforated stock metal trays. The mesiodistal crown width and cervical width were measured for each incisor and recorded separately for left and right teeth. The length was measured for each incisor and recorded separately for left and right maxillary central incisor using digitec height caliper. The mean value of maximum crown length of maxillary left central incisor of male was greater in length compared with maxillary right central incisor. Mean value of maximum crown length for male patient right and left side was greater compared with maximum crown length of female patient. When compared the dimensions of teeth between two sex, male group shows larger values to female group.

A survey of retracted articles in dentistry.

PubMed

Nogueira, Túlio Eduardo; Gonçalves, Andréia Souza; Leles, Cláudio Rodrigues; Batista, Aline Carvalho; Costa, Luciane Rezende

2017-07-06

Publication retraction is a mechanism to preserve the scientific literature against publications that contain seriously flawed or erroneous data, redundant publication, plagiarism, unethical research, and other features that compromise the integrity of science. An increase in the occurrence of retractions in recent years has been reported. Nevertheless, there is scarce information on this topic concerning publications in dentistry and related specialties. Thus, this study aimed to investigate retracted papers published in dental journals. Data collection included an exploratory search in PubMed and a specific search in SCImago Journal Rank indexed journals, complemented by the cases reported on the Retraction Watch website and in PubMed. All 167 dental journals included in SCImago were searched for identification of retracted articles up to March 2016. The selected retracted articles and their corresponding retraction notices were recorded and assessed for classification according to the reason for retraction and other additional information. Forty of the 167 journals scrutinised at SCImago (23.9%) had at least one retracted article, and four additional journals were identified from the Retraction Watch website. A total of 72 retracted found were retracted for the reasons: redundant publication (20.8%), plagiarism (18.1%), misconduct (13.8%), overlap (13.6%) and honest error (9.7%). Higher number of retractions were reported in those journals with cites/doc <2.0-n = 49 (74.2%). The types of studies were mainly laboratory studies (34.7%), case reports (22.2%) and review articles (13.9%). The approach to ethical problems in papers published in dental scientific journals is still incipient; retractions were mostly due to the authors' malpractice and were more frequently related to journals with less impact.

Comparison of incisor inclination in patients with Class III malocclusion treated with orthognathic surgery or orthodontic camouflage.

PubMed

Troy, Beth A; Shanker, Shiva; Fields, Henry W; Vig, Katherine; Johnston, William

2009-02-01

Reports comparing Class III patients treated by camouflage and those treated by orthognathic surgery are not numerous. The purpose of this study was to compare the dental and skeletal values of Class III patients treated with these methods against normative data and over the course of treatment. Thirty-three surgical and 39 camouflage Class III patients were selected from a graduate orthodontic clinic and regional private practices, and lateral cephalograms were digitized. Skeletal and dental values were obtained, and mean and efficacy evaluations referenced to ethnic norms were calculated. At pretreatment, the surgery patients had more severe skeletal discrepancies and more compensated incisors. During presurgical orthodontic treatment, most of the surgery group's mandibular incisors were significantly decompensated, although half of the maxillary incisors remained compensated. The surgical move improved 90% of these patients but to only 60% to 65% of the norm. The camouflage group was compensated at pretreatment, and they became more compensated in the end. After treatment, there were no differences between the incisor positions of the 2 groups. There was no statistical difference in incisor inclination and position between the Class III surgical and camouflage groups after treatment; there was a significant difference in the pretreatment and posttreatment incisor inclination and position compared with normative values for both the surgical and the camouflage groups; the maxillary and mandibular incisors were not adequately decompensated in the surgical group, but significant improvement in mandibular incisor position and axial inclination was achieved presurgically. The outcome of the surgical correction was limited by the inadequate presurgical orthodontic incisor decompensation, and orthodontic compensation of incisors occurred postsurgically to achieve an optimal occlusal result.

Misconduct accounts for the majority of retracted scientific publications

PubMed Central

Fang, Ferric C.; Steen, R. Grant; Casadevall, Arturo

2012-01-01

A detailed review of all 2,047 biomedical and life-science research articles indexed by PubMed as retracted on May 3, 2012 revealed that only 21.3% of retractions were attributable to error. In contrast, 67.4% of retractions were attributable to misconduct, including fraud or suspected fraud (43.4%), duplicate publication (14.2%), and plagiarism (9.8%). Incomplete, uninformative or misleading retraction announcements have led to a previous underestimation of the role of fraud in the ongoing retraction epidemic. The percentage of scientific articles retracted because of fraud has increased ∼10-fold since 1975. Retractions exhibit distinctive temporal and geographic patterns that may reveal underlying causes. PMID:23027971

Retraction techniques in laparoscopic colorectal surgery: a literature-based review.

PubMed

Ladwa, N; Sajid, M S; Pankhania, N K; Sains, P; Baig, M K

2013-08-01

To systematically review the published literature and describe the various techniques of bowel and mesentery retraction available for use in laparoscopic colorectal resection. A comprehensive search of the literature was undertaken using MESH terms 'retraction', 'laparoscopic' and 'colorectal'. All articles describing methods of retraction in laparoscopic colorectal surgery were included. Twelve methods of retraction in laparoscopic colorectal surgery were described. Five case-based series and three case studies were reported on 108 patients. Techniques were classified into those offering retraction of the small or large bowel or according to the mode of retraction. Many retraction methods are available to the surgeon varying in cost, invasiveness and complexity. Adequate retraction remains a challenge for optimal exposure and dissection during laparoscopic colorectal surgery. © 2013 The Authors Colorectal Disease © 2013 The Association of Coloproctology of Great Britain and Ireland.

What time-lag for a retraction search on PubMed?

PubMed

Decullier, Evelyne; Huot, Laure; Maisonneuve, Hervé

2014-06-25

To investigate fraud and errors, scientists have studied cohorts of retraction notices. These researches have been performed using a PubMed search on publication type "retraction of publication" which retrieves the notices of the retractions. We assessed the stability of the indexation of retraction notices over a 15-month period and what was the time-lag to get stability. A search on notices of retraction issued in 2008 was repeated every 3 months during 15 months from February 2011. The first search resulted in 237 notices of retraction. Throughout the study period, 14 discrepancies with the initial search were observed (6%). We found that the number of retraction notices became stable 35 months after the retraction. The time-lag observed in this study has to be taken into account when performing a PubMed search.

Misconduct as the main cause for retraction. A descriptive study of retracted publications and their authors.

PubMed

Campos-Varela, Isabel; Ruano-Raviña, Alberto

2018-06-05

To analyze the causes of retracted publications and the main characteristics of their authors. A descriptive cross-sectional study was designed including all retracted publications from January 1st, 2013-December 31st, 2016 indexed in PubMed. The causes of retraction were classified as: data management, authorship issues, plagiarism, unethical research, journal issues, review process, conflict of interest, other causes, and unknown reasons. Then, misbehaviour was classified as misconduct, suspicion of misconduct or no misconduct suspicion. 1,082 retracted publications were identified. The retraction rate for the period was 2.5 per 10,000 publications. The main cause of retraction was misconduct (65.3%), and the leading reasons were plagiarism, data management and compromise of the review process. The highest proportion of retracted publications corresponded to Iran (15.52 per 10,000), followed by Egypt and China (11.75 and 8.26 per 10,000). Currently, misconduct is the main cause of retraction. Specific strategies to limit this phenomenon must be implemented. It would be useful to standardize reasons and procedures for retraction. The development of a standard retraction form to be permanently indexed in a database might be relevant. Copyright © 2018 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Retracted Publications Within Radiology Journals.

PubMed

Rosenkrantz, Andrew B

2016-02-01

The purpose of this study was to characterize trends related to retracted publications within radiology journals. PubMed was queried to identify all articles with the publication type "retracted publication" or "notification of retraction." Articles published within radiology journals were identified using Journal Citation Reports' journal categories. Available versions of original articles and publication notices were accessed from journal websites. Citations to retracted publications were identified using Web of Science. Overall trends were assessed. Forty-eight retracted original research articles were identified within radiology journals since 1983, which included 1.1% of all PubMed "retracted publication" entries. Distinct PubMed entries were available for the retracted publication and retraction notification in 39 of 48 articles. The original PDF was available for 37 articles, although the articles were not watermarked as retracted in 23 cases. In six cases with a watermarked PDF, further searches identified nonwatermarked versions. Original HTML versions were available for 13 articles but 11 were not watermarked. The mean (± SD) delay between publication and retraction was 2.7 ± 2.8 years (range, 0-16 years). The mean number of citations to retracted articles was 10.9 ± 17.1 (range, 0-94 citations). Reasons for retraction included problematic or incorrect methods or results (although it typically was unclear whether these represented honest errors or misconduct) in 33.3% of cases, complete or partial duplicate publication in 33.3% of cases, plagiarism in 14.6% of cases, a permission issue in 8.3% of cases, the publisher's error in 6.3% of cases, and no identified reason in 6.3% of cases. One or no retractions occurred annually from 1986 to 2001, although two or more retractions occurred annually in nine of the 12 years from 2002 through 2013. Retraction represents an uncommon, yet potentially increasing, issue within radiology journals that publishers have inconsistently and insufficiently addressed. Greater awareness and training in proper biomedical research conduct, as well as establishment and enforcement of standardized publishers' policies, are warranted.

Contralateral posterior interhemispheric approach to deep medial parietooccipital vascular malformations: surgical technique and results.

PubMed

Burkhardt, Jan-Karl; Winkler, Ethan A; Lawton, Michael T

2017-07-21

OBJECTIVE Deep medial parietooccipital arteriovenous malformations (AVMs) and cerebral cavernous malformations (CCMs) are traditionally resected through an ipsilateral posterior interhemispheric approach (IPIA), which creates a deep, perpendicular perspective with limited access to the lateral margins of the lesion. The contralateral posterior interhemispheric approach (CPIA) flips the positioning, with the midline positioned horizontally for retraction due to gravity, but with the AVM on the upper side and the approach from the contralateral, lower side. The aim of this paper was to analyze whether the perpendicular angle of attack that is used in IPIA would convert to a parallel angle of attack with the CPIA, with less retraction, improved working angles, and no significant increase in risk. METHODS A retrospective review of pre- and postoperative clinical and radiographic data was performed in 8 patients who underwent a CPIA. RESULTS Three AVMs and 5 CCMs were resected using the CPIA, with an average nidus size of 2.3 cm and CCM diameter of 1.7 cm. All lesions were resected completely, as confirmed on postoperative catheter angiography or MRI. All patients had good neurological outcomes, with either stable or improved modified Rankin Scale scores at last follow-up. CONCLUSIONS The CPIA is a safe alternative approach to the IPIA for deep medial parietooccipital vascular malformations that extend 2 cm or more off the midline. Contralaterality and retraction due to gravity optimize the interhemispheric corridor, the surgical trajectory to the lesion, and the visualization of the lateral margin, without resection or retraction of adjacent normal cortex. Although the falx is a physical barrier to accessing the lesion, it stabilizes the ipsilateral hemisphere while gravity delivers the dissected lesion through the transfalcine window. Patient positioning, CSF drainage, venous preservation, and meticulous dissection of the deep margins are critical to the safety of this approach.

45 CFR 17.7 - Retractions or corrections.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Retractions or corrections. 17.7 Section 17.7... INFORMATION TO NEWS MEDIA § 17.7 Retractions or corrections. Where the Assistant Secretary for Public Affairs... person named therein requests a retraction or correction, the Department shall issue a retraction or...

45 CFR 17.7 - Retractions or corrections.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Retractions or corrections. 17.7 Section 17.7... INFORMATION TO NEWS MEDIA § 17.7 Retractions or corrections. Where the Assistant Secretary for Public Affairs... person named therein requests a retraction or correction, the Department shall issue a retraction or...

45 CFR 17.7 - Retractions or corrections.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Retractions or corrections. 17.7 Section 17.7... INFORMATION TO NEWS MEDIA § 17.7 Retractions or corrections. Where the Assistant Secretary for Public Affairs... person named therein requests a retraction or correction, the Department shall issue a retraction or...

16 CFR 1101.52 - Procedure for retraction.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Procedure for retraction. 1101.52 Section... INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Retraction § 1101.52 Procedure for retraction. (a) Initiative. The Commission may retract information under section 6(b)(7) on the...

16 CFR 1101.52 - Procedure for retraction.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Procedure for retraction. 1101.52 Section... INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Retraction § 1101.52 Procedure for retraction. (a) Initiative. The Commission may retract information under section 6(b)(7) on the...

45 CFR 17.7 - Retractions or corrections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 1 2011-10-01 2011-10-01 false Retractions or corrections. 17.7 Section 17.7... INFORMATION TO NEWS MEDIA § 17.7 Retractions or corrections. Where the Assistant Secretary for Public Affairs... person named therein requests a retraction or correction, the Department shall issue a retraction or...

16 CFR 1101.52 - Procedure for retraction.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Procedure for retraction. 1101.52 Section... INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Retraction § 1101.52 Procedure for retraction. (a) Initiative. The Commission may retract information under section 6(b)(7) on the...

16 CFR 1101.52 - Procedure for retraction.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Procedure for retraction. 1101.52 Section... INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Retraction § 1101.52 Procedure for retraction. (a) Initiative. The Commission may retract information under section 6(b)(7) on the...

45 CFR 17.7 - Retractions or corrections.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Retractions or corrections. 17.7 Section 17.7... INFORMATION TO NEWS MEDIA § 17.7 Retractions or corrections. Where the Assistant Secretary for Public Affairs... person named therein requests a retraction or correction, the Department shall issue a retraction or...

Retraction policies of top scientific journals ranked by impact factor.

PubMed

Resnik, David B; Wager, Elizabeth; Kissling, Grace E

2015-07-01

This study gathered information about the retraction policies of the top 200 scientific journals, ranked by impact factor. Editors of the top 200 science journals for the year 2012 were contacted by email. One hundred forty-seven journals (74%) responded to a request for information. Of these, 95 (65%) had a retraction policy. Of journals with a retraction policy, 94% had a policy that allows the editors to retract articles without authors' consent. The majority of journals in this sample had a retraction policy, and almost all of them would retract an article without the authors' permission.

Plagiarism Allegations Account for Most Retractions in Major Latin American/Caribbean Databases.

PubMed

Almeida, Renan Moritz V R; de Albuquerque Rocha, Karina; Catelani, Fernanda; Fontes-Pereira, Aldo José; Vasconcelos, Sonia M R

2016-10-01

This study focuses on retraction notices from two major Latin American/Caribbean indexing databases: SciELO and LILACS. SciELO includes open scientific journals published mostly in Latin America/the Caribbean, from which 10 % are also indexed by Thomson Reuters Web of Knowledge Journal of Citation Reports (JCR). LILACS has a similar geographical coverage and includes dissertations and conference/symposia proceedings, but it is limited to publications in the health sciences. A search for retraction notices was performed in these two databases using the keywords "retracted", "retraction" "withdrawal", "withdrawn", "removed" and "redress". Documents were manually checked to identify those that actually referred to retractions, which were then analyzed and categorized according to the reasons alleged in the notices. Dates of publication/retraction and time to retraction were also recorded. Searching procedures were performed between June and December 2014. Thirty-one retraction notices were identified, fifteen of which were in JCR-indexed journals. "Plagiarism" was alleged in six retractions of this group. Among the non-JCR journals, retraction reasons were alleged in fourteen cases, twelve of which were attributed to "plagiarism". The proportion of retracted articles for the SciELO database was approximately 0.005 %. The reasons alleged in retraction notices may be used as signposts to inform discussions in Latin America on plagiarism and research integrity. At the international level, these results suggest that the correction of the literature is becoming global and is not limited to mainstream international publications.

Retraction of publications in nursing and midwifery research: A systematic review.

PubMed

Al-Ghareeb, Amal; Hillel, Stav; McKenna, Lisa; Cleary, Michelle; Visentin, Denis; Jones, Martin; Bressington, Daniel; Gray, Richard

2018-05-01

Rates of manuscript retraction in academic journals are increasing. Papers are retracted because of scientific misconduct or serious error. To date there have been no studies that have examined rates of retraction in nursing and midwifery journals. A systematic review of Journal Citation Report listed nursing science journals. The Medline database was searched systematically from January 1980 through July 2017, and www.retractionwatch.com was manually searched for relevant studies that met the inclusion criteria. Two researchers undertook title and abstract and full text screening. Data were extracted on the country of the corresponding author, journal title, impact factor, study design, year of retraction, number of citations after retraction, and reason for retraction. Journals retraction index was also calculated. Twenty-nine retracted papers published in nursing science journals were identified, the first in 2007. This represents 0.029% of all papers published in these journals since 2007. We observed a significant increase in the retraction rate of 0.44 per 10,000 publications per year (95% CI; 0.03-0.84, p = .037). There was a negative association between a journal's retraction index and impact factor with a significant reduction in retraction index of -0.57 for a one-point increase in impact factor (95% CI; -1.05 to -0.09, p = .022). Duplicate publication was the most common reason for retraction (n = 18, 58%). The mean number of citations manuscripts received after retraction was seven, the highest was 52. Most (n = 27, 93.1%) of the retracted papers are still available online (with a watermark indicating they are retracted). Compared to more established academic disciplines, rates of retraction in nursing and midwifery are low. Findings suggest that unsound research is not being identified and that the checks and balances incumbent in the scientific method are not working. In a clinical discipline, this is concerning and may indicate that research that should have been removed from the evidence base continues to influence nursing and midwifery care. Copyright © 2018 Elsevier Ltd. All rights reserved.

A modified, lingually supported cantilevered Herbst appliance.

PubMed

Snodgrass, D

1996-01-01

This new, fixed-functional appliance/Herbst/Bioprogressive system is designed for patient comfort and mandatory compliance. It also combines the positive clinical effects of four fixed-functional systems. It allows rapid palatal expansion of the upper arch, alveolar uprighting of the lower arch, upper and lower incisor alignment, and sagittal correction of Class II malocclusions to occur simultaneously with one appliance fixed in both arches. It is indicated for use in growing patients with skeletal Class II malocclusions. The ideal timing for treatment is the late mixed dentition. Being able to remove the appliance after one year with the upper second bicuspids erupting slightly Class III so the clinician can immediately begin fixed finishing mechanics would be ideal. This new Herbst design will reduce the frequency of orthognathic surgery and upper bicuspid extraction to camouflage Class II malocclusions. At the same time, it gives total control to the clinician in treating some more difficult, non-compliant patients. Fixed-functional appliances, which improve treatment efficiency and treatment results and provide for patient comfort, while at the same time give the treating clinician almost total control of the three planes of facial growth will open new doors for orthodontic treatment and research in the next century.

Surgical Orthodontic Treatment for Open Bite in Noonan Syndrome Patient: A Case Report.

PubMed

Kawakami, Masayoshi; Yamamoto, Kazuhiko; Shimomura, Tadahiro; Kirita, Tadaaki

2016-03-01

Noonan syndrome, characterized by short stature, facial anomalies, and congenital heart defects, may also be associated with hematopoietic disorders. Craniofacial anomalies in affected patients include hypertelorism and severe open bite associated with masticatory dysfunction. We treated a Noonan syndrome patient with a skeletal open bite. Surgical orthodontic treatment including two-jaw surgery established a good occlusal relationship after correction of severe anemia. Both upper and lower incisors were moved to upright positions, while clockwise rotation of the palatal plane and decreased mandibular plane angle were accomplished. Lower masticatory activity may affect posttreatment occlusion in such cases.

Panoramic radiographic survey of hypodontia in Australian Defence Force recruits.

PubMed

Lynham, A

1990-02-01

Comprehensive dental examinations and panoramic radiographs were used to determine the prevalence of hypodontia in 662 Australian Defence Force recruits. Of the sampled population, 6.3 per cent exhibited some degree of hypodontia (third molar agenesis excluded). Previous studies produced similar results. Third molar agenesis occurred in 22.7 per cent of the sample which again is in agreement with other studies. There was no statistical difference between the sexes in third molar agenesis; however, there was a significant difference with upper second premolars. Females exhibited an extremely low incidence of absence of maxillary lateral incisors.

Shade determination using camouflaged visual shade guides and an electronic spectrophotometer.

PubMed

Kvalheim, S F; Øilo, M

2014-03-01

The aim of the present study was to compare a camouflaged visual shade guide to a spectrophotometer designed for restorative dentistry. Two operators performed analyses of 66 subjects. One central upper incisor was measured four times by each operator; twice with a camouflaged visual shade guide and twice with a spectrophotometer Both methods had acceptable repeatability rates, but the electronic shade determination showed higher repeatability. In general, the electronically determined shades were darker than the visually determined shades. The use of a camouflaged visual shade guide seems to be an adequate method to reduce operator bias.

[Diversity and meaning of masculine phallic palaeolithic images in Western Europe].

PubMed

Angulo Cuesta, J; García Diez, M

2006-03-01

The archaeological record necessary to understand the sexual behaviour of our ancestors from Upper Palaeolithic (38.000-8.500 B.C.) is limited. Traditionally the ethnographic information about sexuality and the relations between sexes derived from comparitions with current primitive human groups have been considered very important, although they have been evaluated more from a social and anthropological rather than biological perspective. Ice age art art, both rock and portable, is a reflection of the behaviour of palaeolithic human groups. The purpose of this text focuses on understanding the types of representations and sexual attitudes during the Upper Palaeolithic, as reflected from masculine images of phallic character. Practices of foreskin retraction, some phalli possibly circumcised, copulative acts, expressions of masturbation, instruments that have been likely been used for masturbation and other sexual scenes, some of which are difficult to interpretate, show that the sexual behaviour of the human groups of the Upper Palaeolithic were similar to ours, both from a biological and physiological viewpoint.

Upper eyelid abscess as a late complication of frontal sinus trauma

PubMed Central

Adriana, Iliescu Daniela; Cornel, Stefan; Mihaela, Timaru Cristina; Speranta, Schmitzer; Algerino, De Simone; Mehdi, Batras; Elena, Zeca Cristina; Bogdan, Maciuceanu-Zarnescu Mircea

2015-01-01

The authors report a case of upper eyelid abscess in a 30 year old male that presented in the ophthalmology department with complains of recurrent eyelid pyosis, hyperaemia and swelling that started 2 months earlier and that did not ease to repeated courses of antibiotic therapy. The reported history of the patient revealed frontal sinus trauma that occurred 5 years before and that required surgical treatment (fixation with titan plaque and screws) with total healing and giving no further complains over the next years. The present cranial CT imaging showed intraorbital fat infiltration with displacement of one orbital arcade screw. Clinical findings showed normal ocular mobility. Antibiotic treatment and screw extraction through eyelid fistula improved the outcome but did not resolve the fistulous communication. Final management involved surgical removal of orbital arcade plaque and remaining screw and excision of fistula tract. The postoperative outcome was very good and the fistula remained closed but left the patient with an upper eyelid retraction which will require oculoplastic surgery in the future. PMID:29450319

Lack of involvement of medical writers and the pharmaceutical industry in publications retracted for misconduct: a systematic, controlled, retrospective study.

PubMed

Woolley, Karen L; Lew, Rebecca A; Stretton, Serina; Ely, Julie A; Bramich, Narelle J; Keys, Janelle R; Monk, Julie A; Woolley, Mark J

2011-06-01

The primary objective of this study was to quantify how many publications retracted because of misconduct involved declared medical writers (i.e., not ghostwriters) or declared pharmaceutical industry support. The secondary objective was to investigate factors associated with misconduct retractions. A systematic, controlled, retrospective, bibliometric study. Retracted publications dataset in the MEDLINE database. PubMed was searched (Limits: English, human, January 1966 - February 2008) to identify publications retracted because of misconduct. Publications retracted because of mistake served as the control group. Standardized definitions and data collection tools were used, and data were analyzed by an independent academic statistician. Of the 463 retracted publications retrieved, 213 (46%) were retracted because of misconduct. Publications retracted because of misconduct rarely involved declared medical writers (3/213; 1.4%) or declared pharmaceutical industry support (8/213; 3.8%); no misconduct retractions involved both declared medical writers and the industry. Retraction because of misconduct, rather than mistake, was significantly associated with: absence of declared medical writers (odds ratio: 0.16; 95% confidence interval: 0.05-0.57); absence of declared industry involvement (0.25; 0.11-0.58); single authorship (2.04; 1.01-4.12); first author having at least one other retraction (2.05; 1.35-3.11); and first author affiliated with a low/middle income country (2.34; 1.18-4.63). The main limitations of this study were restricting the search to English-language and human research articles. Publications retracted because of misconduct rarely involved declared medical writers or declared pharmaceutical industry support. Increased attention should focus on factors that are associated with misconduct retractions.

Evaluating the Amount of Tooth Movement and Root Resorption during Canine Retraction with Friction versus Frictionless Mechanics Using Cone Beam Computed Tomography

PubMed Central

Makhlouf, Mohamed; Aboul–Ezz, Amr; Fayed, Mona Salah; Hafez, Hend

2018-01-01

BACKGROUND: The current study was carried out to compare the amount of tooth movement during canine retraction comparing two different retraction mechanics; friction mechanics represented by a NiTi closed coil spring versus frictionless mechanics represented by T - loop, and their effect on root resorption using Cone Beam Computed Tomography (CBCT). METHOD: Ten patients were selected in a split-mouth study design that had a malocclusion that necessitates the extraction of maxillary first premolars and retraction of maxillary canines. The right maxillary canines were retracted using T - loops fabricated from 0.017 X 0.025 TMA wires. The left maxillary canines received NiTi coil spring with 150 gm of retraction force. Pre retraction and post retraction Cone Beam Computed Tomography were taken to evaluate the amount of tooth movement and root resorption using three-dimensional planes. RESULTS: T - loop side showed statistically significant higher mean anteroposterior measurement than NiTi coil spring side, indicating a lower amount of canine movement pre and post a canine retraction. Concerning the root resorption, there was no statistically significant change in the mean measurements of canine root length post retraction. CONCLUSION: The NiTi coil spring side showed more distal movement more than the T-loop side. Both retraction mechanics with controlled retraction force, do not cause root resorption. PMID:29531610

Evaluating the Amount of Tooth Movement and Root Resorption during Canine Retraction with Friction versus Frictionless Mechanics Using Cone Beam Computed Tomography.

PubMed

Makhlouf, Mohamed; Aboul-Ezz, Amr; Fayed, Mona Salah; Hafez, Hend

2018-02-15

The current study was carried out to compare the amount of tooth movement during canine retraction comparing two different retraction mechanics; friction mechanics represented by a NiTi closed coil spring versus frictionless mechanics represented by T - loop, and their effect on root resorption using Cone Beam Computed Tomography (CBCT). Ten patients were selected in a split-mouth study design that had a malocclusion that necessitates the extraction of maxillary first premolars and retraction of maxillary canines. The right maxillary canines were retracted using T - loops fabricated from 0.017 X 0.025 TMA wires. The left maxillary canines received NiTi coil spring with 150 gm of retraction force. Pre retraction and post retraction Cone Beam Computed Tomography were taken to evaluate the amount of tooth movement and root resorption using three-dimensional planes. T - loop side showed statistically significant higher mean anteroposterior measurement than NiTi coil spring side, indicating a lower amount of canine movement pre and post a canine retraction. Concerning the root resorption, there was no statistically significant change in the mean measurements of canine root length post retraction. The NiTi coil spring side showed more distal movement more than the T-loop side. Both retraction mechanics with controlled retraction force, do not cause root resorption.

16 CFR § 1101.52 - Procedure for retraction.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Procedure for retraction. § 1101.52 Section... REGULATIONS INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Retraction § 1101.52 Procedure for retraction. (a) Initiative. The Commission may retract information under section 6(b)(7) on...

Rapidly progressive internal root resorption: a case report.

PubMed

Keinan, David; Heling, Ilana; Stabholtz, Adam; Moshonov, Joshua

2008-10-01

The etiology of internal root resorption is not fully understandable, trauma and chronic pulpitis are considered the main risk factors. Usually the process is asymptomatic and diagnosed upon routine radiographic examination. This case report presents a rapid progression of internal resorption related directly to traumatic injury. A 16-year-old female arrived at the emergency room after a mild extrusion of the mandibular incisors. The initial treatment included repositioning and splinting of the teeth. Radiographs performed at repositioning and splinting demonstrated normal configuration of the incisor's roots. Ten months later progressive internal resorption of the left mandibular first incisor was diagnosed. While treating this tooth similar process was detected in the right mandibular second incisor and in the mandibular left second incisor. The lower right first incisor reacted inconsistently to vitality test. As a result of the severe and rapidly progressive nature of the process, root canal treatments were performed in all lower incisors. The follow-up radiographs demonstrate arrest of the internal resorption process.

[Eyelid retraction of neurologic origin: Report of three cases].

PubMed

Cartier R, Luis; Guzmán S, Jorge; Pasquali F, Renzo

2017-02-01

Eyelid retraction, has received limited attention and it has passively been interpreted as the result of an overactive levator palpebrae superioris muscle secondary to midbrain injury. However, eyelid retractions can occur in other neurological diseases, not directly related with the midbrain. We report three patients who developed eyelid retraction. One patient had a bilateral eyelid retraction, related with Creutzfeldt-Jakob disease (CJD). Another patient had a unilateral right eyelid retraction associated with a thalamic-mesencephalic infarct. The third patient had a bilateral pontine infarction on magnetic resonance imaging. In the patient with CJD, eyelid retraction did not subside. Among patients with infarctions, the retraction persisted after focal symptoms had subsided, showing an evolution that was apparently independent of the basic process. The analysis of these patients allows us to conclude that the pathogenesis of eyelid retraction includes supranuclear mechanisms in both the development and maintenance of the phenomenon. Unilateral or bilateral eyelid retraction does not alter the normal function of eyelid, which ever had normal close eye blink. In these reported cases, a hyperactivity of levator palpebrae superioris muscle was clinically ruled out.

Laser gingival retraction: a quantitative assessment.

PubMed

Krishna Ch, Vamsi; Gupta, Nidhi; Reddy, K Mahendranadh; Sekhar, N Chandra; Aditya, Venkata; Reddy, G V K Mohan

2013-08-01

Proper gingival retraction improves the prognosis of crowns and bridges with sub gingival finishlines.Use of lasers assists the operator to achieve proper retraction with good clinical results. The present study was intended to assess the amount of lateral gingival retraction achieved quantitatively by using diode lasers. Study was carried on 20 patients attended to a dental institution that underwent root canal treatment and indicated for fabrication of crowns. Gingival retraction was carried out on 20 teeth and elastomeric impressions were obtained. Models retrieved from the impressions were sectioned and the lateral distance between finish line and the marginal gingival was measured using tool makers microscope. Retraction was measured in mid buccal, mesio buccal and disto buccal regions. The values obtained were used to calculate the mean lateral retraction in microns. Mean retraction values of 399.5 μm, 445.5 μm and 422.5μm were obtained in mid buccal, mesio buccal and disto buccal regions respectively. Gingival Retraction achieved was closer to the thickness of sulcular epithelium and greater than the minimum required retraction of 200um.

Quantitative study of the correlation between cerebellar retraction factors and hearing loss following microvascular decompression for hemifacial spasm.

PubMed

Li, Ning; Zhao, Wei-Guo; Pu, Chun-Hua; Yang, Wen-Lei

2018-01-01

This prospective study quantitatively measured the cerebellar retraction factors, including retraction distance, depth and duration, and evaluated their potential relationship to the development of hearing loss after microvascular decompression (MVD) for hemifacial spasm (HFS). One hundred ten patients with primary HFS who underwent MVD in our department were included into this study. The cerebellar retraction factors were quantitatively measured on preoperative MR and timed during MVD. Associations of cerebellar retraction and other factors to postoperative hearing loss were analyzed. Eleven (10%) patients developed hearing loss after MVD. Compared with the group without hearing loss, the cerebellar retraction distance, depth and duration of the group with hearing loss were significantly greater (p < 0.05). Multivariate regression analysis showed that greater cerebellar retraction depth and longer retraction duration were significantly associated with a higher incidence of postoperative hearing impairment (p < 0.05). This study strongly suggested a correlation between the cerebellar retraction factors, especially retraction depth and duration, and possibility of hearing loss following MVD for HFS.

Comparison of intra-oral and study cast measurements in the assessment of malocclusion.

PubMed

Ovsenik, Maja; Farcnik, Franc M; Verdenik, Ivan

2004-06-01

Malocclusion assessment methods are based on registrations and measurements made on study casts, which requires that impressions be taken. In addition to being costly and time-consuming, this process can be unpleasant for very young children. Therefore, the aim of this study was to evaluate the reliability of intra-oral measurements that compute a malocclusion index score to determine malocclusion severity in the mixed dentition. The research was part of a longitudinal study in Slovenia on a sample of 530 3-year-old children. At 8 years of age (mean 8.5 years, standard deviation 0.2), a cohort of 101 children (44 boys, 57 girls) was randomly selected in a cross-sectional study. Quantitative registrations of space and occlusal anomalies were performed intra-orally as well as on study casts. Kappa (kappa) statistics were used to evaluate the agreement between clinical and study cast malocclusion assessments. Systematic bias of measurements was tested using Wilcoxon's signed rank test. The results showed complete agreement between the two measurements for anterior crossbite, anterior open bite and overjet scores (kappa = 1); excellent reliability for the buccal segment relationship (kappa = 0.93), transverse occlusion of posterior teeth (kappa = 0.87); and substantial agreement for overbite (kappa = 0.79) and midline deviation (kappa = 0.71). For the remainder of the traits the agreement was moderate: rotation of incisors (kappa = 0.58), crowding of upper incisors (kappa = 0.51), axial inclination of teeth (kappa = 0.44) and lower incisor crowding (kappa = 0.41). Intra-orally small, but statistically significant scoring of lower incisor rotation and crowding was identified. On the study casts the most favourable axial inclination was found for buccal segment occlusion. Overall classification into severity grades, based on the total malocclusion score, showed excellent agreement between the two methods (kappa = 0.89), without statistically significant bias. Malocclusion assessment, recorded and measured intra-orally, is as reliable as assessment on study casts. The proposed method can be used in screening, in epidemiological studies and in clinical orthodontic assessment.

[Preputial development in Japanese boys].

PubMed

Ishikawa, Eiji; Kawakita, Mutsushi

2004-05-01

The natural course of preputial development is still not clearly understood. The preputial retractability was evaluated in 242 Japanese boys. The incidence of having a retractable prepuce gradually increased with age from 0% at age 1 year to 77% by the age of 11 to 15 years. In 48 boys, preputial development was followed up for 2 to 10 years with the self-retract maneuver. Non-retractable prepuce was found in 9 boys, which then became retractable within 2-7 years. The prepuce became retractable in most of the boys with balanoposthitis. In conclusion, forced retraction or circumcision is unnecessary for phimosis in boys with or without balanoposthitis.

Retractions in the scientific literature: do authors deliberately commit research fraud?

PubMed

Steen, R Grant

2011-02-01

Papers retracted for fraud (data fabrication or data falsification) may represent a deliberate effort to deceive, a motivation fundamentally different from papers retracted for error. It is hypothesised that fraudulent authors target journals with a high impact factor (IF), have other fraudulent publications, diffuse responsibility across many co-authors, delay retracting fraudulent papers and publish from countries with a weak research infrastructure. All 788 English language research papers retracted from the PubMed database between 2000 and 2010 were evaluated. Data pertinent to each retracted paper were abstracted from the paper and the reasons for retraction were derived from the retraction notice and dichotomised as fraud or error. Data for each retracted article were entered in an Excel spreadsheet for analysis. Journal IF was higher for fraudulent papers (p<0.001). Roughly 53% of fraudulent papers were written by a first author who had written other retracted papers ('repeat offender'), whereas only 18% of erroneous papers were written by a repeat offender (χ=88.40; p<0.0001). Fraudulent papers had more authors (p<0.001) and were retracted more slowly than erroneous papers (p<0.005). Surprisingly, there was significantly more fraud than error among retracted papers from the USA (χ(2)=8.71; p<0.05) compared with the rest of the world. This study reports evidence consistent with the 'deliberate fraud' hypothesis. The results suggest that papers retracted because of data fabrication or falsification represent a calculated effort to deceive. It is inferred that such behaviour is neither naïve, feckless nor inadvertent.

A Novel Procedure for the Immediate Reconstruction of Severely Resorbed Alveolar Sockets for Advanced Periodontal Disease.

PubMed

Aimetti, Mario; Manavella, Valeria; Cricenti, Luca; Romano, Federica

2017-01-01

Background. Several clinical techniques and a variety of biomaterials have been introduced over the years in an effort to overcome bone remodeling and resorption after tooth extraction. However, the predictability of these procedures in sockets with severely resorbed buccal/lingual plate due to periodontal disease is still unknown. Case Description. A patient with advanced periodontitis underwent extraction of upper right lateral and central incisors. The central incisor exhibited complete buccal bone plate loss and a 9 mm vertical bone deficiency on its palatal side. The alveolar sockets were filled with collagen sponge and covered with a nonresorbable high-density PTFE membrane. Primary closure was not attained and any rigid scaffold material was not used. Histologic analysis provided evidence of new bone formation. At 12 months a cone-beam computed tomographic scan revealed enough bone volume to insert two conventional dental implants in conjunction with minor horizontal bone augmentation procedures. Clinical Implications. This case report would seem to support the potential of the proposed reconstructive approach in changing the morphology of severely resorbed alveolar sockets, minimizing the need for advanced bone regeneration procedures during implant placement.

A Novel Procedure for the Immediate Reconstruction of Severely Resorbed Alveolar Sockets for Advanced Periodontal Disease

PubMed Central

2017-01-01

Background. Several clinical techniques and a variety of biomaterials have been introduced over the years in an effort to overcome bone remodeling and resorption after tooth extraction. However, the predictability of these procedures in sockets with severely resorbed buccal/lingual plate due to periodontal disease is still unknown. Case Description. A patient with advanced periodontitis underwent extraction of upper right lateral and central incisors. The central incisor exhibited complete buccal bone plate loss and a 9 mm vertical bone deficiency on its palatal side. The alveolar sockets were filled with collagen sponge and covered with a nonresorbable high-density PTFE membrane. Primary closure was not attained and any rigid scaffold material was not used. Histologic analysis provided evidence of new bone formation. At 12 months a cone-beam computed tomographic scan revealed enough bone volume to insert two conventional dental implants in conjunction with minor horizontal bone augmentation procedures. Clinical Implications. This case report would seem to support the potential of the proposed reconstructive approach in changing the morphology of severely resorbed alveolar sockets, minimizing the need for advanced bone regeneration procedures during implant placement. PMID:28250998

Delayed orthodontic extrusion of a traumatically intruded immature upper permanent incisor - a case report.

PubMed

Umesan, Uday Kumar; Chua, Kui Lay; Kok, Ei Chuen

2014-10-01

Dental injuries are probably the most common orofacial injuries sustained during sports and play. Intrusion or intrusive luxations occur when the teeth are driven into the alveolus by an axially directed impact. This article describes the clinical case of an 8-year-old patient who suffered complete intrusive luxation of an immature permanent central incisor following an accident. An attempt at spontaneous re-eruption failed to facilitate re-emergence of the tooth beyond 2 mm. The recommended wait-and-see strategy in anticipation of spontaneous re-eruption should cease to be an option when no further elongation can be observed. Orthodontic extrusion or surgical re-positioning is a valid treatment alternative when the former fails. In this case, although the recommended time period for effecting orthodontic extrusion had elapsed, this procedure was undertaken successfully presumably owing to the application of controlled, biologically optimal forces. A review of the extruded tooth a year later revealed no clinical or radiographic signs of loss of vitality. This was confirmed radiographically by the completion of root development, an intact lamina dura and no evident signs of resorption. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Surgical Orthodontic Treatment of an Impacted Canine in the Presence of Dens Invaginatus and Follicular Cyst

PubMed Central

Canevello, Carola; Laffi, Nicola

2014-01-01

Introduction. “Dens invaginatus” is a dental anomaly which originates from the invagination of the ameloblastic epithelium into the lingual surface of the dental crown during the odontogenesis. It can cause early pulpal necrosis, abscesses, retention or dislocation of contiguous elements, cysts, and internal resorptions. It normally affects the upper lateral incisors. In the following study the authors will discuss the etiology, the physiopathology, and the surgical-orthodontic management of a rare case of impacted canine associated with dens invaginatus and follicular cyst, with the aim of highlighting the importance of taking any therapeutic decision based on the data available in the literature. Case Report. The present study describes a combined surgical-orthodontic treatment of an impacted canine associated with a lateral incisor (2.2) suffering from type III dens invaginatus with radicular cyst, in a 15-year-old patient. Discussion. When treating a dens invaginatus there are different therapeutic solutions: they depend on the gravity of the anomaly and on the association with the retention of a permanent tooth. The aesthetic and functional restoration becomes extremely important when performing a surgical-orthodontic repositioning. PMID:24963421

Multi-disciplinary approach for enhancing orthodontic esthetics - case report.

PubMed

Kalia, Ajit; Mirdehghan, Nasim; Khandekar, Sonali; Patil, Wasu

2015-01-01

In contemporary dental care, an increasing number of adult patients are now seeking orthodontic treatment with the primary motive of improvement in appearance and achievement of esthetic smile. Proper recognition of the dental and facial defects at the outset of treatment is the most important key to esthetic success and is essential in satisfying the patient's needs. By following the rules of Golden proportion smiles can be made attractive, harmonious, symmetrical, and proportionate. Consisted of 22-year-old girl who came for treatment of crowding in maxillary and mandibular arches, abnormal overjet and overbite and had unesthetic peg lateral. Non-extraction therapy was carried out since the patient had good soft tissue drape, alignment was achieved by expanding the arches and moving teeth in ideal axial inclination. Esthetic smile was attained using composite buildup of upper right peg lateral and minor adjunctive surgery (full thickness periodontal graft) on lower right central incisor. The present case report orchestrates interrelationship between various branches of dentistry and orthodontics. It exhibits how multidisciplinary approach can be used to achieve ideal dental esthetics in a 22-year-old girl who was successfully treated for peg shaped lateral incisor, gingival recession, and unesthetic smile.

Multi-disciplinary approach for enhancing orthodontic esthetics – case report

PubMed Central

Kalia, Ajit; Mirdehghan, Nasim; Khandekar, Sonali; Patil, Wasu

2015-01-01

Background In contemporary dental care, an increasing number of adult patients are now seeking orthodontic treatment with the primary motive of improvement in appearance and achievement of esthetic smile. Proper recognition of the dental and facial defects at the outset of treatment is the most important key to esthetic success and is essential in satisfying the patient’s needs. By following the rules of Golden proportion smiles can be made attractive, harmonious, symmetrical, and proportionate. Methodology Consisted of 22-year-old girl who came for treatment of crowding in maxillary and mandibular arches, abnormal overjet and overbite and had unesthetic peg lateral. Results Non-extraction therapy was carried out since the patient had good soft tissue drape, alignment was achieved by expanding the arches and moving teeth in ideal axial inclination. Esthetic smile was attained using composite buildup of upper right peg lateral and minor adjunctive surgery (full thickness periodontal graft) on lower right central incisor. Conclusion The present case report orchestrates interrelationship between various branches of dentistry and orthodontics. It exhibits how multidisciplinary approach can be used to achieve ideal dental esthetics in a 22-year-old girl who was successfully treated for peg shaped lateral incisor, gingival recession, and unesthetic smile. PMID:26316821

Long-term skeletal and dental changes in patients with cleft lip and palate after maxillary distraction: a report of three cases treated with a rigid external distraction device.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2005-04-01

We examined long-term skeletal and dental changes in three patients with cleft lip and palate who underwent maxillary distraction using a rigid external distraction device. Two were children, and one was an adult. Changes in the overjet (OJ), overbite (OB), and positions of the anterior nasal spine (ANS), upper incisors (U1), pogonion (Pog), and lower incisors (L1) were measured on preoperative to 36 months postoperative lateral-cephalograms. In the adult, the positions of all examination points were relatively stable from 6 to 36 months postoperatively, and the OJ and OB were maintained at over 2 mm at 36 months. In the children, the positions of ANS and U1 changed inferiorly, Pog and L1 changed anteroinferiorly, and OJ and OB tended to decrease from 6 to 36 months postoperatively. Long-term skeletal and dental stability following maxillary distraction was relatively well maintained in the adult patient. In the children, the maxillomandibular growth was observed after maxillary distraction, but the mandibular overgrowth might have been inhibited by the correction of class III dentoskeletal deformity resulting from the maxillary distraction.

14 CFR 23.729 - Landing gear extension and retraction system.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Landing gear extension and retraction... Design and Construction Landing Gear § 23.729 Landing gear extension and retraction system. (a) General..., occurring during retraction at any airspeed up to 1.6 V S 1 with flaps retracted, and for any load factor up...

14 CFR 23.729 - Landing gear extension and retraction system.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Landing gear extension and retraction... Design and Construction Landing Gear § 23.729 Landing gear extension and retraction system. (a) General..., occurring during retraction at any airspeed up to 1.6 V S 1 with flaps retracted, and for any load factor up...

14 CFR 23.729 - Landing gear extension and retraction system.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Landing gear extension and retraction... Design and Construction Landing Gear § 23.729 Landing gear extension and retraction system. (a) General..., occurring during retraction at any airspeed up to 1.6 V S 1 with flaps retracted, and for any load factor up...

14 CFR 23.729 - Landing gear extension and retraction system.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Landing gear extension and retraction... Design and Construction Landing Gear § 23.729 Landing gear extension and retraction system. (a) General..., occurring during retraction at any airspeed up to 1.6 V S 1 with flaps retracted, and for any load factor up...

14 CFR 23.729 - Landing gear extension and retraction system.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Landing gear extension and retraction... Design and Construction Landing Gear § 23.729 Landing gear extension and retraction system. (a) General..., occurring during retraction at any airspeed up to 1.6 V S 1 with flaps retracted, and for any load factor up...

Systematics of the Platyrrhinus helleri species complex (Chiroptera: Phyllostomidae), with descriptions of two new species

USGS Publications Warehouse

Velazco, Paúl M.; Gardner, Alfred L.; Patterson, Bruce D.

2010-01-01

Platyrrhinus is a diverse genus of small to large phyllostomid bats characterized by a comparatively narrow uropatagium thickly fringed with hair, a white dorsal stripe, comparatively large inner upper incisors that are convergent at the tips, and three upper and three lower molars. Eighteen species are currently recognized, the majority occurring in the Andes. Molecular, morphological, and morphometric analyses of specimens formerly identified as Platyrrhinus helleri support recognition of Platyrrhinus incarum as a separate species and reveal the presence of two species from western and northern South America that we describe herein as new (Platyrrhinus angustirostris sp. nov. from eastern Colombia and Ecuador, north-eastern Peru, and Venezuela and Platyrrhinus fusciventris sp. nov. from Guyana, Suriname, French Guiana, Trinidad and Tobago, northern Brazil, eastern Ecuador, and southern Venezuela). These two new species are sister taxa and, in turn, sister to Platyrrhinus incarum.

Care for an Uncircumcised Penis

MedlinePlus

... tip of the penis. This is called foreskin retraction. Most boys will be able to retract their ... how to retract his own foreskin. But foreskin retraction should never be forced. Until the foreskin fully ...

Comparative study of upper lip frenectomy with the CO2 laser versus the Er, Cr: YSGG laser

PubMed Central

Pié-Sánchez, Jordi; España-Tost, Antonio J.; Arnabat-Domínguez, Josep

2012-01-01

Objectives: To compare upper lip frenulum reinsertion, bleeding, surgical time and surgical wound healing in frenectomies performed with the CO2 laser versus the Er, Cr:YSGG laser. Study design: A prospective study was carried out on 50 randomized pediatric patients who underwent rhomboidal resection of the upper lip frenulum with either the CO2 laser or the Er,Cr:YSGG laser. Twenty-five patients were assigned to each laser system. All patients were examined at 7, 14, 21 days and 4 months after the operation in order to assess the surgical wound healing. Results: Insertion of the frenulum, which was preoperatively located between the upper central incisors, migrated to the mucogingival junction as a result of using both laser systems in all patients. Only two patients required a single dose of 650 mg of paracetamol, one of either study group. CO2 laser registered improved intraoperative bleeding control results and shorter surgical times. On the other hand, the Er,Cr:YSGG laser achieved faster healing. Conclusions: Upper lip laser frenectomy is a simple technique that results in minimum or no postoperative swelling or pain, and which involves upper lip frenulum reinsertion at the mucogingival junction. The CO2 laser offers a bloodless field and shorter surgical times compared with the Er,Cr:YSGG laser. On the other hand, the Er,Cr:YSGG laser achieved faster wound healing. Key words:Frenectomy, upper lip frenulum, CO2 laser, Er,Cr:YSGG laser, laser. PMID:22143683

Genetics Home Reference: isolated Duane retraction syndrome

MedlinePlus

... Health Conditions Isolated Duane retraction syndrome Isolated Duane retraction syndrome Printable PDF Open All Close All Enable ... view the expand/collapse boxes. Description Isolated Duane retraction syndrome is a disorder of eye movement. This ...

Eruption of first permanent incisors and live weight gain in grazing yearling Angora goats.

PubMed

McGregor, B A; Butler, K L

2013-05-01

To investigate the effects of the timing and duration of eruption of the first permanent incisors, live weight, sex and other factors on contemporaneous live weight gain in Angora goats. Goats were previously part of a pen study on the effects of energy intake of Angora does during pregnancy and lactation on kid development. The design was 3 levels of nutrition in mid-pregnancy by 2 levels of postnatal nutrition in 17 randomised blocks. Artificial insemination, ultrasound examination and feeding does in pens enabled accurate conduct of the study. After weaning, goats were grazed in sex groups. Live weight change between 14 and 20 months of age was related to deciduous first incisor loss and permanent first incisor development and other attributes assessed before the study. Live weight change was related to the elapsed time for first permanent incisors to commence eruption and to the length of time for first permanent incisors to erupt. This response was affected by sex. Over summer and autumn, entire males with short eruption intervals gained 2-3 kg more than entire males with long eruption intervals. Females that reached first permanent incisor eruption by mid-summer had a live weight gain of 3 kg more than those that reached the same development 3 months later. Live weight change in yearling Angora goats was associated with the process of first permanent incisor eruption. In females, live weight gain was greater when first permanent incisor eruption was earlier. In males, live weight gain was greater when first permanent incisor eruption was faster. © 2013 The Authors. Australian Veterinary Journal © 2013 Australian Veterinary Association.

Frequency and variability of dental morphology in deciduous and permanent dentition of a Nasa indigenous group in the municipality of Morales, Cauca, Colombia

PubMed Central

Díaz, Eider; García, Lorena; Hernández, Michelle; Palacio, Lesly; Ruiz, Diana; Velandia, Nataly; Villavicencio, Judy

2014-01-01

Objectives: To determine the frequency, variability, sexual dimorphism and bilateral symmetry of fourteen dental crown traits in the deciduous and permanent dentition of 60 dental models (35 women and 25 men) obtained from a native, indigenous group of Nasa school children of the Musse Ukue group in the municipality of Morales, Department of Cauca, Colombia. Methods: This is a quantitative, descriptive, cross-sectional study that characterizes dental morphology by means of the systems for temporary dentition from Dahlberg (winging), and ASUDAS (crowding, reduction of hypocone, metaconule and cusp 6), Hanihara (central and lateral incisors in shovel-shape and cusp 7), Sciulli (double bit, layered fold protostylid, cusp pattern and cusp number) and Grine (Carabelli trait); and in permanent dentition from ASUDAS (Winging, crowding, central and lateral incisors in shovel-shape and double shovel-shape, Carabelli trait, hypocone reduction, metaconule, cusp pattern, cusp number, layered fold protostylid, cusp 6 and cusp 7). Results: The most frequent dental crown features were the shovel-shaped form, grooved and fossa forms of the Carabelli trait, metaconule, cusp pattern Y6, layered fold, protostylid (point P) and cusp 6. Sexual dimorphism was not observed and there was bilateral symmetry in the expression of these features. Conclusions: The sample studied presented a great affinity with ethnic groups belonging to the Mongoloid Dental Complex due to the frequency (expression) and variability (gradation) of the tooth crown traits, upper incisors, the Carabelli trait, the protostylid, cusp 6 and cusp 7. The influence of the Caucasoide Dental Complex associated with ethno-historical processes cannot be ruled out. PMID:24970955

Two-dimensional analysis of palpebral opening in blepharoptosis: visual iris-pupil complex percentage by digital photography.

PubMed

Choi, Yeop; Eo, SuRak

2014-04-01

The vertical dimension of the palpebral fissure and the marginal reflex distance are conventionally used to assess the amount or degree of blepharoptosis, and levator function is assessed by measuring total upper lid excursion between the extremes of down-gaze and up-gaze. However, these are 1-dimensional measures obtained with a ruler, and the results obtained are dependent on examiner skill. Digital photographs were obtained of 692 patients before and after upper blepharoplasty. Visual iris-pupil complex percentage (VIP) was measured in the 1,305 eyes by digital calculation using Adobe Photoshop CS3 (Adobe Systems, Inc). Perioperative eye images in primary gaze were evaluated independently by 2 surgeons, 2 nurses, and a graphic designer, and after excluding 50 eyes which were nonconcordant and 29 eyes which revealed retracted upper lids, the remaining 1,305 eyes were classified into 4 major groups, that is, into excellent (n = 415), good (n = 435), subclinical (n = 270), and prominent ptosis (n = 185) groups. In addition, eyes were subdivided into 5 types according to the iris-pupil complex position within the palpebral fissure. Visual iris-pupil complex percentages were from 85% to 94% in the excellent, from 78% to 84% in the good, from 70% to 77% in the subclinical ptosis, and below 70% in the prominent ptosis group. Patients in the subclinical or prominent ptosis eye group required surgery for blepharoptosis. Iris-pupil complex relation to the palpebral opening was classified into 5 eye types, namely, standard (n = 961), scleral (n = 266), sinking (n = 151), retracted (n = 3), and fish (n = 3). The authors devised a new prospective measurement method for assessing blepharoptosis in a clinical setting. Graphical comparisons between the devised method of measuring VIP and mathematical estimations showed that the devised method is easier, more practical, and more precise for measuring degree of blepharoptosis from general population trends, and that VIP also provides a useful objective index for evaluating the postoperative results of blepharoptosis.

The ethics of scholarly publishing: exploring differences in plagiarism and duplicate publication across nations.

PubMed

Amos, Kathleen A

2014-04-01

This study explored national differences in plagiarism and duplicate publication in retracted biomedical literature. The national affiliations of authors and reasons for retraction of papers accessible through PubMed that were published from 2008 to 2012 and subsequently retracted were determined in order to identify countries with the largest numbers and highest rates of retraction due to plagiarism and duplicate publication. Authors from more than fifty countries retracted papers. While the United States retracted the most papers, China retracted the most papers for plagiarism and duplicate publication. Rates of plagiarism and duplicate publication were highest in Italy and Finland, respectively. Unethical publishing practices cut across nations.

The ethics of scholarly publishing: exploring differences in plagiarism and duplicate publication across nations*

PubMed Central

Amos, Kathleen A.

2014-01-01

This study explored national differences in plagiarism and duplicate publication in retracted biomedical literature. The national affiliations of authors and reasons for retraction of papers accessible through PubMed that were published from 2008 to 2012 and subsequently retracted were determined in order to identify countries with the largest numbers and highest rates of retraction due to plagiarism and duplicate publication. Authors from more than fifty countries retracted papers. While the United States retracted the most papers, China retracted the most papers for plagiarism and duplicate publication. Rates of plagiarism and duplicate publication were highest in Italy and Finland, respectively. Unethical publishing practices cut across nations. PMID:24860263

Cancer cells cause vascular endothelial cell (vEC) retraction via 12(S)HETE secretion; the possible role of cancer cell derived microparticle.

PubMed

Uchide, Keiji; Sakon, Masato; Ariyoshi, Hideo; Nakamori, Syouji; Tokunaga, Masaru; Monden, Morito

2007-02-01

Cancer cell mediated vascular endothelial cell (vEC) retraction plays a pivotal role in cancer metastasis. The aim of this study is to clarify the biochemical character of vEC retraction factor derived from human breast cancer cell line, MCF-7. In order to estimate vEC retracting activity, transwell chamber assay system was employed. We first tested the effects of trypsin digestion as well as lipid extraction of culture medium (CM). Trypsin digestion of CM resulted in approximately 40% loss of vEC retracting activity and lipid extraction of CM by Brigh and Dyer methods recovered approximately 60% of vEC retracting activity, suggesting that approximately 60% of vEC retracting activity in MCF-7 derived CM is due to lipid. Although Nordihydroguaiaretic acid (NDGA), the specific lipoxygenase inhibitor, suppressed vEC retracting activity in CM, Acetyl salicylic acid (ASA), a specific cyclooxygenase inhibitor, did not affect the activity, suggesting that lipid exerting vEC retracting activity in CM belongs to lipoxygenase mediated arachidonate metabolites. Thin layer chromatography clearly demonstrated that Rf value of lipid vEC retracting factor in CM is identical to 12HETE. Authentic 12(S)HETE, but not 12(R)HETE, showed vEC retracting activity. After the ultracentrifugation of CM, most lipid vEC retracting activity was recovered from the pellet fraction, and flow cytometric analysis using specific antibody against 12(S)HETE clearly showed the association of 12(S)HETE with small particle in CM. These findings suggested the principal involvement of 12(S)HETE in cancer cell derived microparticles in cancer cell mediated vEC retraction.

Accelerated eruption of rat lower incisor. Relationship between impeded and unimpeded eruption rates, rate of attrition, tooth length, and production of dentin and enamel.

PubMed

Risnes, S; Septier, D; Goldberg, M

1995-01-01

The present investigation studies the effects of persistently cutting one lower rat incisor out of occlusion. Within four days, the rate of eruption of the cut (unimpeded) incisor increased to 216% and that of the uncut (impeded) contralateral to 136% of the baseline rate. While the former remained high, the latter decreased gradually to about 90% within three weeks. The rate of attrition of the impeded incisor increased to 233% of the baseline rate within two days, then fell abruptly, and remained at a slightly lower level than the rate of eruption. Accordingly, the length of the erupted part of the impeded incisor decreased initially, but increased gradually after about four days. Measurements made on SEM micrographs of the series of transverse tooth segments obtained when cutting the incisor out of occlusion, showed that growth-related increase in mesiodistal tooth width was arrested from the 10th segment, dentin thickness decreased gradually to about 50% in the 12th segment, and enamel thickness, after an initial increase, decreased to about 80% in the 11th segment. The present study provides experimental evidence that accelerated eruption affects morphogenesis and histogenesis of the rat lower incisor. An impeded incisor, especially the contralateral, may not serve as an ideal control.

[Comparison between one-step and two-step space closing methods of sliding mechanics using three-dimensional finite element].

PubMed

Han, Yaohui; Mou, Lan; Xu, Gengchi; Yang, Yiqiang; Ge, Zhenlin

2015-03-01

To construct a three-dimensional finite element model comparing between one-step and two-step methods in torque control of anterior teeth during space closure. Dicom image data including maxilla and upper teeth were obtained though cone-beam CT. A three-dimensional model was set up and the maxilla, upper teeth and periodontium were separated using Mimics software. The models were instantiated using Pro/Engineer software, and Abaqus finite element analysis software was used to simulate the sliding mechanics by loading 1.47 Nforce on traction hooks with different heights (2, 4, 6, 8, 10, 12 and 14 mm, respectively) in order to compare the initial displacement between six maxillary anterior teeth (one-step method) and four maxillary anterior teeth (two-step method). When moving anterior teeth bodily, initial displacements of central incisors in two-step method and in one-step method were 29.26 × 10⁻⁶ mm and 15.75 × 10⁻⁶ mm, respectively. The initial displacements of lateral incisors in two-step method and in one-step method were 46.76 × 10(-6) mm and 23.18 × 10(-6) mm, respectively. Under the same amount of light force, the initial displacement of anterior teeth in two-step method was doubled compared with that in one-step method. The root and crown of the canine couldn't obtain the same amount of displacement in one-step method. Two-step method could produce more initial displacement than one-step method. Therefore, two-step method was easier to achieve torque control of the anterior teeth during space closure.

Craniofacial abnormalities in homozygous Small eye (Sey/Sey) embryos and newborn mice.

PubMed

Kaufman, M H; Chang, H H; Shaw, J P

1995-06-01

The Small eye (Sey) gene in the mouse is lethal in the homozygous state. It is located on chromosome 2, is a mutation in the Pax-6 gene, and is genetically homologous with the human aniridia 2 (AN2) gene mutation. Numerous studies over the last few years, using genetic and molecular biological approaches, have investigated both the location of the gene as well as its possible mode of action. In the homozygous state, the primary defect appears to be limited to the failure of differentiation of the presumptive lens and nasal placodes. Such mice therefore display a characteristic phenotype; they possess neither eyes nor any nasal derivatives. Their heterozygous (Sey/+) and normal (+/+) littermates may be distinguished before birth only by a detailed examination of their eyes. Few detailed morphological/histological studies have been undertaken to date in the Sey/Sey embryos and newborn, and in the present study we describe a variety of craniofacial abnormalities that have not previously been reported. We observed, with one exception, delayed closure of the palate, and the presence in 80% of mice of an abnormal complement of upper incisor teeth, so that 35% possessed 1 supernumerary tooth while 45% possessed 2 supernumerary teeth. In these mice, a total of either 3 or 4, rather than the normal complement of 2, upper incisor teeth were present. Possibly the most unexpected finding, however, was the presence of a median cartilaginous rod-like structure which protruded between the 2 maxillae to give the Alizarin red S and Alcian blue-stained 'cleared' skulls of the newborn mice a characteristic 'unicorn-like' appearance. While this structure appeared to be a rostral extension of the chondrocranium, its exact derivation is unclear.

Effects of near-infrared LED therapy on experimental tooth replantation in rats.

PubMed

Pigatto Mitihiro, Débora; de Paula Ramos, Solange; Corazza Montero, Janaína; Alves Campos, Aline; de Oliveira Toginho Filho, Dari; Dezan Garbelini, Cassia Cilene

2017-02-01

Dental avulsion damages periodontal tissues and may induce dentoalveolar ankylosis and root resorption after replantation. The aim of this work was to evaluate the effects of light-emitting diode (LED) therapy after tooth replantation. The upper right incisors of 36 male Wistar rats were extracted and replanted after 15 min. The control group (Co, n = 18) was submitted to replantation and the LED group (n = 18) was submitted to replantation and LED therapy (940 nm, 4 J cm -2 ) for three consecutive days (0, 24, and 48 h). Six animals from each group were euthanized at 7, 14, and 21 days for histological analysis. The upper left incisors were used as a negative control. Data were compared using the Fisher exact test, considering P < 0.05. After 7 days, the Co (73.3%) and LED (72.2%) groups presented areas of periodontal ligament necrosis. However, periodontal ligament necrosis was more frequent in the LED group at 14 (70%, P < 0.05) and 21 days (43.2%, P < 0.05) in relation to the Co group (33 and 21.6%). Inflammatory cell infiltration was more frequent in the Co group at 7 days (100%) than the LED group (24.4%, P < 0.05), but increased in the LED group after 21 days (83.3%, P < 0.05). Bone necrosis was more frequent in the LED group after 14 (79%, P < 0.05) and 21 days (60%, P < 0.005) than in the Co group (45% and 20%). Bone repair was evident in the Co group at 14 days. All of the replanted teeth had pulp necrosis. The results suggest that the application of LED therapy up to 48 h after tooth replantation may delay periodontal ligament repair. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Tooth Whitening And Temperature Rise With Two Bleaching Activation Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abu-ElMagd, D. M.; El-Sayad, I. I.; Abd El-Gawad, L. M.

2009-09-27

To measure the tooth whitening and the surface and Intrapulpal temperature increase in vitro on freshly extracted upper human central incisors after chemical, Zoom AP light and diode laser activated bleaching. Thirty caries-free upper human incisors were selected. Teeth were divided into three equal groups according to the methods of activation of the bleaching agent (n = 10). A whitening gel containing hydrogen peroxide was applied to the buccal surface of all teeth. Group I was bleached using chemically activated hydrogen peroxide gel, for three applications of 15 min each. Group II was bleached with high intensity advanced power Zoommore » activation light (Zoom AP), for three applications of 15 min each. Group III was bleached with diode laser activation technique, where the teeth were irradiated with 2 Watt diode laser for three applications of 30 sec each. The whitening degree was assessed using an image analysis system, while temperature rise was recorded using a thermocouple on the external tooth surface and Intrapulpal. The degree of whitening increased significantly in all groups. However, the percentage of whitening was not statistically significantly different between the three groups. In addition, group II showed statistically significant higher mean rise in both surface and pulp temperatures than group I and group III. Chemical bleaching produces the same whitening effect as Zoom AP light and laser, with no surface or pulpal temperature rise. Laser application is faster and produces less surface and pulp temperature increase than Zoom AP light. Diode laser used to activate bleaching gels is not considered dangerous to the vitality of dental pulp using power settings of 2 W.« less

Sources of error in the retracted scientific literature.

PubMed

Casadevall, Arturo; Steen, R Grant; Fang, Ferric C

2014-09-01

Retraction of flawed articles is an important mechanism for correction of the scientific literature. We recently reported that the majority of retractions are associated with scientific misconduct. In the current study, we focused on the subset of retractions for which no misconduct was identified, in order to identify the major causes of error. Analysis of the retraction notices for 423 articles indexed in PubMed revealed that the most common causes of error-related retraction are laboratory errors, analytical errors, and irreproducible results. The most common laboratory errors are contamination and problems relating to molecular biology procedures (e.g., sequencing, cloning). Retractions due to contamination were more common in the past, whereas analytical errors are now increasing in frequency. A number of publications that have not been retracted despite being shown to contain significant errors suggest that barriers to retraction may impede correction of the literature. In particular, few cases of retraction due to cell line contamination were found despite recognition that this problem has affected numerous publications. An understanding of the errors leading to retraction can guide practices to improve laboratory research and the integrity of the scientific literature. Perhaps most important, our analysis has identified major problems in the mechanisms used to rectify the scientific literature and suggests a need for action by the scientific community to adopt protocols that ensure the integrity of the publication process. © FASEB.

The Role of Epithelial Stat3 in Amelogenesis during Mouse Incisor Renewal.

PubMed

Zhang, Bin; Meng, Bo; Viloria, Edward; Naveau, Adrien; Ganss, Bernhard; Jheon, Andrew H

2018-03-16

The aim of this study was to evaluate the role of epithelial signal transducer and activator of transcription 3 (STAT3) in mouse incisor amelogenesis. Since Stat3 is expressed in the epithelial component of developing and adult mouse teeth, we generated and analyzed Krt14Cre/+;Stat3fl/fl mutant mice in which Stat3 was inactivated in epithelia including ameloblast progenitors and ameloblasts, the cells responsible for enamel formation. Histological analysis showed little enamel matrix in mutant incisors compared to controls. Delayed incisor enamel mineralization was demonstrated using micro-computed X-ray tomography analysis and was supported by an increase in the pre-expression distance of enamel-enriched proteins such as amelogenin, ameloblastin, and kallikrein-4. Lastly, scanning electron microscopy analysis showed little enamel mineralization in mutant incisors underneath the mesial root of the 1st molar; however, the micro-architecture of enamel mineralization was similar in the erupted portion of control and mutant incisors. Taken together, our findings demonstrate for the first time that the absence of epithelial Stat3 in mice leads to delayed incisor amelogenesis. © 2018 S. Karger AG, Basel.

Traction force microscopy in rapidly moving cells reveals separate roles for ROCK and MLCK in the mechanics of retraction.

PubMed

Morin, Timothy R; Ghassem-Zadeh, Sean A; Lee, Juliet

2014-08-15

Retraction is a major rate-limiting step in cell motility, particularly in slow moving cell types that form large stable adhesions. Myosin II dependent contractile forces are thought to facilitate detachment by physically pulling up the rear edge. However, retraction can occur in the absence of myosin II activity in cell types that form small labile adhesions. To investigate the role of contractile force generation in retraction, we performed traction force microscopy during the movement of fish epithelial keratocytes. By correlating changes in local traction stress at the rear with the area retracted, we identified four distinct modes of retraction. "Recoil" retractions are preceded by a rise in local traction stress, while rear edge is temporarily stuck, followed by a sharp drop in traction stress upon detachment. This retraction type was most common in cells generating high average traction stress. In "pull" type retractions local traction stress and area retracted increase concomitantly. This was the predominant type of retraction in keratocytes and was observed mostly in cells generating low average traction stress. "Continuous" type retractions occur without any detectable change in traction stress, and are seen in cells generating low average traction stress. In contrast, to many other cell types, "release" type retractions occur in keratocytes following a decrease in local traction stress. Our identification of distinct modes of retraction suggests that contractile forces may play different roles in detachment that are related to rear adhesion strength. To determine how the regulation of contractility via MLCK or Rho kinase contributes to the mechanics of detachment, inhibitors were used to block or augment these pathways. Modulation of MLCK activity led to the most rapid change in local traction stress suggesting its importance in regulating attachment strength. Surprisingly, Rho kinase was not required for detachment, but was essential for localizing retraction to the rear. We suggest that in keratocytes MLCK and Rho kinase play distinct, complementary roles in the respective temporal and spatial control of rear detachment that is essential for maintaining rapid motility. Copyright © 2014 Elsevier Inc. All rights reserved.

Effectiveness of the transpalatal arch in controlling orthodontic anchorage in maxillary premolar extraction cases: A systematic review and meta-analysis.

PubMed

Diar-Bakirly, Samira; Feres, Murilo Fernando Neuppmann; Saltaji, Humam; Flores-Mir, Carlos; El-Bialy, Tarek

2017-01-01

To evaluate the effectiveness of the transpalatal arch (TPA) as an anchorage device in preventing maxillary molar mesialization during retraction of the anterior teeth after premolar extraction. This systematic review intended to include patients indicated for upper premolar bilateral extraction and subsequent retraction of anterior teeth, considering the use of TPA as an anchorage tool in one of the treatment groups. The search was systematically performed, up to April 2015, in the following electronic databases: Medline, Embase, and all evidence-based medicine reviews via OVID, Cochrane Library, Scopus, PubMed, and Web of Science. Risk of bias assessment was performed using Cochrane's Risk of Bias Tool for randomized clinical trials (RCTs) and Methodological Index for Nonrandomized Studies (MINORS) for non-RCTs. Fourteen articles were finally included. Nine RCTs and five non-RCTs presented moderate to high risk of bias. Only one study investigated the use of TPA in comparison with no anchorage, failing to show significant differences regarding molar anchorage loss. A meta-analysis showed a significant increase in anchorage control when temporary anchorage devices were compared with TPA (mean difference [MD] 2.09 [95% confidence interval {CI} 1.80 to 2.38], seven trials), TPA + headgear (MD 1.71 [95% CI 0.81 to 2.6], four trials), and TPA + utility arch (MD 0.63 [95% CI 0.12 to 1.15], 3 trials). Based on mostly moderate risk of bias and with some certainty level, TPA alone should not be recommended to provide maximum anchorage during retraction of anterior teeth in extraction cases.

A randomized clinical trial comparing mandibular incisor proclination produced by fixed labial appliances and clear aligners.

PubMed

Hennessy, Joe; Garvey, Thérèse; Al-Awadhi, Ebrahim A

2016-09-01

To compare the mandibular incisor proclination produced by fixed labial appliances and third generation clear aligners. Patients underwent a course of orthodontic treatment using either fixed labial appliances or clear aligners (Invisalign). Mandibular incisor proclination was measured by comparing pretreatment and near-end treatment lateral cephalograms. Eligibility criteria included adult patients with mild mandibular incisor crowding (<4 mm) and Class I skeletal bases (ANB, 1-4°). The main outcome was the cephalometric change in mandibular incisor inclination to the mandibular plane at the end of treatment. Eligible patients picking a sealed opaque envelope, which indicated their group allocation, was used to achieve randomization. Data was analyzed using a Welch two-sample t-test. Forty-four patients (mean age, 26.4 ± 7.7 years) were randomized in a 1:1 ratio to either the fixed labial appliance or the clear aligner group. Baseline characteristics were similar for both groups: Fixed appliance mean crowding was 2.1 ± 1.3 mm vs clear aligner mean crowding, 2.5 ± 1.3 mm; pretreatment mean mandibular incisor inclination for the fixed appliance group was 90.8 ± 5.4° vs 91.6 ± 6.4° for the clear aligner group. Fixed appliances produced 5.3 ± 4.3° of mandibular incisor proclination. Clear aligners proclined the mandibular incisors by 3.4 ± 3.2°. The difference between the two groups was not statistically significant (P > .05). There was no difference in the amount of mandibular incisor proclination produced by clear aligners and fixed labial appliances in mild crowding cases.

To evaluate the validity of Recurring Esthetic Dental proportion in natural dentition

PubMed Central

Shetty, Shilpa; Pitti, Varun; Satish Babu, CL; Surendra Kumar, GP; Jnanadev, KR

2011-01-01

Background: Different proportions are described in the literature for smile designing, such as Golden proportion, Golden percentage, Preston's proportion, and recently, Recurring Esthetic Dental (RED) proportion. Aims and Objectives: To evaluate the existence of RED proportion in natural dentition. To determine the relative height of maxillary lateral incisor and canine occurring in natural dentition so that it can be used in any of the above proportions. Materials and Methods: Fifteen male subjects and 15 female subjects in each of the different age groups of 18–23 years, 24–29 years and 30–35 years were selected for this study (total 90). Photographs of the subjects were taken using Nikon D200 camera with 135 mm lens and analyzed using Adobe Photoshop CS4 extended software. The height and width of maxillary central incisors, lateral incisors and canines were found out using the measuring tool provided in the software. Results: Average width ratio and height ratio of maxillary lateral incisor to central incisor and maxillary canine to lateral incisor were calculated to check the existence of RED proportion in natural dentition. Average lateral incisor to central incisor height ratio for “small”- and “medium”-sized teeth was found to be 88% and for “tall”-sized teeth was found to be 84%. Average canine to lateral incisor height ratio for “small”- and “medium”-sized teeth was found to be 106% and for “tall”-sized teeth was found to be 105%. Conclusions: Within the limitations of the study, RED proportion was not seen in natural dentition. PMID:22025841

The characteristics of medical retraction notices.

PubMed Central

Snodgrass, G L; Pfeifer, M P

1992-01-01

During the past twenty years, more than ninety retraction notices have been published in biomedical journals. These retractions constitute a unique body of literature that biomedical researchers, bibliographers, and librarians must monitor to reduce scientific use of retracted, invalid papers. An analysis of medical retraction notices shows that very few are prominent in style, format, or placement, in spite of authoritative publication standards formulated by the International Council of Medical Journal Editors. Although researchers are ultimately responsible for the validity of the information they cite in their own publications, biomedical librarians are in a unique position to educate their patrons regarding retracted papers. PMID:1422502

The retraction of the protoplast during PCD is an active, and interruptible, calcium-flux driven process.

PubMed

Kacprzyk, Joanna; Brogan, Niall P; Daly, Cara T; Doyle, Siamsa M; Diamond, Mark; Molony, Elizabeth M; McCabe, Paul F

2017-07-01

The protoplast retracts during apoptosis-like programmed cell death (AL-PCD) and, if this retraction is an active component of AL-PCD, it should be used as a defining feature for this type of programmed cell death. We used an array of pharmacological and genetic tools to test if the rates of protoplast retraction in cells undergoing AL-PCD can be modulated. Disturbing calcium flux signalling, ATP synthesis and mitochondrial permeability transition all inhibited protoplast retraction and often also the execution of the death programme. Protoplast retraction can precede loss of plasma membrane integrity and cell death can be interrupted after the protoplast retraction had already occurred. Blocking calcium influx inhibited the protoplast retraction, reduced DNA fragmentation and delayed death induced by AL-PCD associated stresses. At higher levels of stress, where cell death occurs without protoplast retraction, blocking calcium flux had no effect on the death process. The results therefore strongly suggest that retraction of the protoplast is an active biological process dependent on an early Ca 2+ -mediated trigger rather than cellular disintegration due to plasma membrane damage. Therefore this morphologically distinct cell type is a quantifiable feature, and consequently, reporter of AL-PCD. Copyright © 2017 Elsevier B.V. All rights reserved.

Myosin II–interacting guanine nucleotide exchange factor promotes bleb retraction via stimulating cortex reassembly at the bleb membrane

PubMed Central

Jiao, Meng; Wu, Di; Wei, Qize

2018-01-01

Blebs are involved in various biological processes such as cell migration, cytokinesis, and apoptosis. While the expansion of blebs is largely an intracellular pressure-driven process, the retraction of blebs is believed to be driven by RhoA activation that leads to the reassembly of the actomyosin cortex at the bleb membrane. However, it is still poorly understood how RhoA is activated at the bleb membrane. Here, we provide evidence demonstrating that myosin II–interacting guanine nucleotide exchange factor (MYOGEF) is implicated in bleb retraction via stimulating RhoA activation and the reassembly of an actomyosin network at the bleb membrane during bleb retraction. Interaction of MYOGEF with ezrin, a well-known regulator of bleb retraction, is required for MYOGEF localization to retracting blebs. Notably, knockout of MYOGEF or ezrin not only disrupts RhoA activation at the bleb membrane, but also interferes with nonmuscle myosin II localization and activation, as well as actin polymerization in retracting blebs. Importantly, MYOGEF knockout slows down bleb retraction. We propose that ezrin interacts with MYOGEF and recruits it to retracting blebs, where MYOGEF activates RhoA and promotes the reassembly of the cortical actomyosin network at the bleb membrane, thus contributing to the regulation of bleb retraction. PMID:29321250

A comprehensive comparative analysis of articles retracted in 2012 and 2013 from the scholarly literature.

PubMed

Damineni, Ravi Sankar; Sardiwal, Kapil Kumar; Waghle, Sita Ram; Dakshyani, M B

2015-01-01

Science is a dynamic subject with ever-changing concepts and is said to be self-correcting. One of the major mechanisms of self-correction is retraction of flawed work. To study the various parameters associated with retraction of scientific articles in 2012 and 2013 and discuss the current trends in article retraction over the period of 2 years. Data were retrieved from MEDLINE (via PubMed) using the keywords retraction of articles, retraction notice, and withdrawal of article in January 2014, and analysis of articles published in 2012 and 2013 was carried out. A total of 155 articles in 2012 and 182 in 2013 were retracted, and original articles followed by case reports constituted major part of it. The most cited reasons for retraction were mistakes, plagiarism, and duplicate submission, and the time interval between submission and retraction had reduced in 2013. Although retracted articles constitute the tip of an iceberg, they are still a matter of major concern in the scientific world. So, editors should follow the Committee on Publication Ethics (COPE) guidelines and make an effective strategy in order to reduce such misconduct, as it reflects very adversely not only in the scientific community but also in the general public.

Efficacy of anti-retraction devices in preventing bacterial contamination of dental unit water lines.

PubMed

Berlutti, Francesca; Testarelli, Luca; Vaia, Francesco; De Luca, Massimo; Dolci, Giovanni

2003-02-01

In this study we examine the efficacy of anti-retraction devices in preventing microbial contamination of dental unit water lines (DUWLs). The study was performed on 54 randomly selected DUs in use at private and public institutions for over six months. The selected DUs were all currently commercially available. To evaluate the efficiency of anti-retraction devices, two different methods were employed, mechanical and microbiological. The ADA/ANSI specification #47 (corresponding to a water retraction of less than 40.3 microl) was used for the evaluation of the retraction determined using the mechanical method; the presence/absence of test microorganisms in DUWLs upstream the turbine after the test was used for evaluating the microbiological assay. Both evaluation methods indicated correct amounts of retraction and prevention of DUWL contamination occurred in only two cases (3.7%). Correct retraction was noted in six other dental units (DUs), but their DUWLs became contaminated during testing. Six other produced the opposite results-improper retraction, yet no contamination. The remaining 40 DUs (74.0%) failed both evaluations. The results showed that the overwhelming majority of the anti-retraction devices did not prevent retraction when the turbine stopped running, leading to a contamination of the water lines, and to a consequent possible cross-contamination of the patients.

Relationship between degree of malocclusion and occlusal interference in mice that spontaneously develop anterior transverse crossbite.

PubMed

Tsukamoto, Yuri; Kajii, Takashi S; Sugawara-Kato, Yuki; Hirabayashi, Yoshifumi; Fujimori, Osamu; Iida, Junichiro

2010-12-01

Mice with brachymorphism (bm) have defective chondrogenesis, including abnormal growth of the spheno-occipital synchondrosis. Malocclusion (anterior transverse crossbite) sometimes spontaneously occurs in inbred BALB/c-bm/bm mice, before the mandibular incisors erupt and make contact with the maxillary incisors. The aim of this study was to determine whether functional lateral loads to incisors promote anterior transverse crossbites in BALB/c-bm/bm mice. BALB/c-bm/bm mice with normal occlusion (normal group), BALB/c-bm/bm mice with malocclusion in which the incisors were not cut (mal group), and BALB/c-bm/bm mice in which the incisors had been cut to eliminate the functional lateral load during continued growth (mal-cut group) were used. We examined the amounts of shift of the maxillary and mandibular incisors in each group using radiographic images. The amount of shift of the maxillary incisors in the mal group was significantly greater than that in normal group. The total amount of shift from the maxilla to the mandible in the mal group was significantly greater than in the normal and mal-cut groups. The results suggest that a continuous functional lateral load to the incisors is strongly related to promoting and worsening anterior transverse crossbite in BALB/c-bm/bm mice. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Enamel-free teeth: Tbx1 deletion affects amelogenesis in rodent incisors.

PubMed

Catón, Javier; Luder, Hans-Ulrich; Zoupa, Maria; Bradman, Matthew; Bluteau, Gilles; Tucker, Abigail S; Klein, Ophir; Mitsiadis, Thimios A

2009-04-15

TBX1 is a principal candidate gene for DiGeorge syndrome, a developmental anomaly that affects the heart, thymus, parathyroid, face, and teeth. A mouse model carrying a deletion in a functional region of the Tbx1 gene has been extensively used to study anomalies related to this syndrome. We have used the Tbx1 null mouse to understand the tooth phenotype reported in patients afflicted by DiGeorge syndrome. Because of the early lethality of the Tbx1-/- mice, we used long-term culture techniques that allow the unharmed growth of incisors until their full maturity. All cultured incisors of Tbx1-/- mice were hypoplastic and lacked enamel, while thorough histological examinations demonstrated the complete absence of ameloblasts. The absence of enamel is preceded by a decrease in proliferation of the ameloblast precursor cells and a reduction in amelogenin gene expression. The cervical loop area of the incisor, which contains the niche for the epithelial stem cells, was either severely reduced or completely missing in mutant incisors. In contrast, ectopic expression of Tbx1 was observed in incisors from mice with upregulated Fibroblast Growth Factor signalling and was closely linked to ectopic enamel formation and deposition in these incisors. These results demonstrate that Tbx1 is essential for the maintenance of ameloblast progenitor cells in rodent incisors and that its deletion results in the absence of enamel formation.

Lower incisor intrusion with intraoral transosseous stainless steel wire anchorage in rabbits.

PubMed

Wu, Jian-chao; Huang, Ji-na; Lin, Xin-ping

2010-06-01

The purpose of this research was to investigate the potential use of intraoral transosseous stainless steel wires as anchorage for intrusion of the lower incisors using a rabbit model. Placement of intraoral transosseous stainless steel wires around incisors is similar to that of intraoral transosseous wiring of edentulous mandibular fractures. Ten male New Zealand rabbits, 9 +/- 1.5 months of age, average weight 1.8 +/- 0.3 kg, were used in this study. One lower incisor was intruded with a 50 g bilateral force using a coil spring for 10 weeks, while the other incisor served as the control. Clinical measurements of the distances between the occlusal edges of the incisors (EE) were performed weekly with a calliper. In addition to standard descriptive statistical calculations, a paired Student's t-test was used for comparison of the two groups. All surgical sites healed uneventfully after insertion of the wires. Significant differences were found in the change of EE between the experimental and control sides from 4 weeks onwards. Intrusion of the incisor, 4 +/- 0.58 mm, was seen on the test side, while EE on the control side remained unchanged. Within the limits of this animal study, it is concluded that the intraoral transosseous stainless steel wire anchorage system is a cost-effective method for intrusion of lower incisors when the use of other anchorage system is not possible.

Enamel-free teeth: Tbx1 deletion affects amelogenesis in rodent incisors

PubMed Central

Catón, Javier; Luder, Hans-Ulrich; Zoupa, Maria; Bradman, Matthew; Bluteau, Gilles; Tucker, Abigail S.; Klein, Ophir; Mitsiadis, Thimios A.

2010-01-01

TBX1 is a principal candidate gene for DiGeorge syndrome, a developmental anomaly that affects the heart, thymus, parathyroid, face, and teeth. A mouse model carrying a deletion in a functional region of the Tbx1 gene has been extensively used to study anomalies related to this syndrome. We have used the Tbx1 null mouse to understand the tooth phenotype reported in patients afflicted by DiGeorge syndrome. Because of the early lethality of the Tbx1−/− mice, we used long-term culture techniques that allow the unharmed growth of incisors until their full maturity. All cultured incisors of Tbx1−/− mice were hypoplastic and lacked enamel, while thorough histological examinations demonstrated the complete absence of ameloblasts. The absence of enamel is preceded by a decrease in proliferation of the ameloblast precursor cells and a reduction in amelogenin gene expression. The cervical loop area of the incisor, which contains the niche for the epithelial stem cells, was either severely reduced or completely missing in mutant incisors. In contrast, ectopic expression of Tbx1 was observed in incisors from mice with upregulated Fibroblast Growth Factor signalling and was closely linked to ectopic enamel formation and deposition in these incisors. These results demonstrate that Tbx1 is essential for the maintenance of ameloblast progenitor cells in rodent incisors and that its deletion results in the absence of enamel formation. PMID:19233155

Incisor malalignment and the risk of periodontal disease progression.

PubMed

Alsulaiman, Ahmed A; Kaye, Elizabeth; Jones, Judith; Cabral, Howard; Leone, Cataldo; Will, Leslie; Garcia, Raul

2018-04-01

The objective of this study was to investigate the association between incisor crowding, irregularity, and periodontal disease progression in the anterior teeth. Data collected over 35 years from men enrolled in the Veterans Affairs Dental Longitudinal Study included information concerning pocket depth and alveolar bone loss. Plaster casts of the maxillary (n = 400) and mandibular (n = 408) arches were available for baseline measurements. Periodontal disease in the anterior teeth was defined as per arch sum of pathologic pocket depth and sum of teeth with any alveolar bone loss in the anterior sextants. Incisor malalignment status was defined by the anterior tooth size-arch length discrepancy index and Little's Irregularity Index. Adjusted mixed effects linear models computed the beta (β) estimates and 95% confidence intervals (95% CI) of the amounts of change in periodontal disease outcomes by the level of malalignment. In the anterior maxillary arch, crowding and spacing were significantly associated with an increased per-arch sum of pathologic pocket depth (β, 0.70 mm; 95% CI, 0.20-1.21, and β, 0.49 mm; 95% CI, 0.06-0.91, respectively). In the anterior mandibular arch, incisor crowding and irregularity were significantly associated with an increased per-arch sum of pathologic pocket depth (mild crowding: β, 0.47 mm; 95% CI, 0.01-0.93; severe irregularity: β, 0.94 mm; 95% CI, 0.50-1.38), and the sum number of teeth with alveolar bone loss (mild and moderate-to-severe crowding: β, 0.45 teeth; 95% CI, 0.08-0.82; and β, 0.45 teeth; 95% CI, 0.13-0.83, respectively; moderate irregularity: β, 0.34 teeth; 95% CI, 0.06-0.62). Certain incisor malalignment traits (ie, maxillary incisor crowding, maxillary incisor spacing, mandibular incisor mild crowding, mandibular incisor moderate-to-severe crowding, mandibular incisor moderate irregularity, and mandibular incisor severe irregularity) are associated with significant periodontal disease progression. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

New method of assessing the relationship between buccal bone thickness and gingival thickness

PubMed Central

2016-01-01

Purpose The aim of this study was to determine the relationship between buccal bone thickness and gingival thickness by means of a noninvasive and relatively accurate digital registration method. Methods In 20 periodontally healthy subjects, cone-beam computed tomographic images and intraoral scanned files were obtained. Measurements of buccal bone thickness and gingival thickness at the central incisors, lateral incisors, and canines were performed at points 0–5 mm from the alveolar crest on the superimposed images. The Friedman test was used to compare buccal bone and gingival thickness for each depth between the 3 tooth types. Spearman's correlation coefficient was calculated to assess the correlation between buccal bone thickness and gingival thickness. Results Of the central incisors, 77% of all sites had a buccal thickness of 0.5–1.0 mm, and 23% had a thickness of 1.0–1.5 mm. Of the lateral incisors, 71% of sites demonstrated a buccal bone thickness <1.0 mm, as did 63% of the canine sites. For gingival thickness, the proportion of sites <1.0 mm was 88%, 82%, and 91% for the central incisors, lateral incisors, and canines, respectively. Significant differences were observed in gingival thickness at the alveolar crest level (G0) between the central incisors and canines (P=0.032) and between the central incisors and lateral incisors (P=0.013). At 1 mm inferior to the alveolar crest, a difference was found between the central incisors and canines (P=0.025). The lateral incisors and canines showed a significant difference for buccal bone thickness 5 mm under the alveolar crest (P=0.025). Conclusions The gingiva and buccal bone of the anterior maxillary teeth were found to be relatively thin (<1 mm) overall. A tendency was found for gingival thickness to increase and bone thickness to decrease toward the root apex. Differences were found between teeth at some positions, although the correlation between buccal bone thickness and soft tissue thickness was generally not significant. PMID:28050315

Histological analysis of retraction pocket pars tensa of tympanic membrane in children.

PubMed

Urík, M; Hurník, P; Žiak, D; Machač, J; Šlapák, I; Motyka, O; Vaculová, J; Dvořáčková, J

2016-07-01

Histological and histochemical analysis of retraction pocket of pars tensa of tympanic membrane in children. Identification of morphological abnormalities in comparison with a healthy tympanic membrane as it is described in standard textbook. Identification of signs typical for cholesteatoma and support for a retraction theory of cholesteatoma formation. A prospective study analysing 31 samples of retraction pockets taken during surgery. University Hospital, Children's Medical Centre Samples of retraction pockets were processed by a standard process for light microscopy, stained by haematoxylin-eosin. Van Gieson's stain was used for differential staining of collagen, Verhoeff's stain for elastic fibre tissues, Alcian blue for acidic polysaccharides and PAS (Periodic Acid Schiff) method for basement membrane polysaccharides. The following findings were observed in the samples of retraction pockets: hyperkeratosis (100%), hypervascularisations (100%), subepithelial fragmented elastic fibres (96%), myxoid changes (87%), subepithelial inflammatory infiltration (84%), rete pegs (71%), papilomatosis (71%), intraepithelial inflammatory cellularizations, (48%), intraepithelial spongiosis (16%) and parakeratosis (3%). No basement membrane continuity interruptions were observed. Thickness of retraction pocket, thickness of epidermis, occurrence of rete pegs and frequency of fragmented elastic fibres was higher in a Grade III stage RP than Grade II stage RP (according to Charachon). Morphological abnormalities in the structure of retraction pockets in comparison with a healthy tympanic membrane were described. The changes are typical for a structure of cholesteatoma (these changes are common in matrix and perimatrix), supporting retraction theory of its origin. Our observations show that it is inflammation that probably plays a key role in the pathogenesis of retraction pocket. The frequency of some of the changes increases with the stage of retraction pocket (II-III according to Charachon). Basement membrane continuity interruptions are not typical for retraction pockets. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Causes and Surgical Outcomes of Lower Eyelid Retraction

PubMed Central

Kim, Kun Hae; Baek, Ji Sun; Lee, Saem; Lee, Jung Hye; Choi, Hye Sun; Kim, Sung Joo

2017-01-01

Purpose To investigate the causes of lower eyelid retraction and evaluate the outcomes of various surgical procedures. Methods We conducted a retrospective medical record review of patients who underwent lower eyelid retraction surgery performed by a single surgeon at Kim's Eye Hospital between 2006 and 2013. We investigated the causes of lower eyelid retraction, clinical history, characteristics, treatment, and surgical outcomes. Preoperative and postoperative margin reflex distance 2 and inferior scleral show were measured for each eyelid. Success was defined as a positive eyelid elevation and a decrease in inferior scleral show. Results A total of 19 lower eyelids were treated in 14 patients with lower eyelid retraction. For cosmetic reasons, surgical correction for congenital lower eyelid retraction was performed on seven eyelids (36.8%). Ten eyelids (52.6%) exhibited secondary lower eyelid retraction after surgery. One eyelid (5.3%) was affected by facial palsy and one eyelid (5.3%) exhibited exophthalmos of an unknown origin. We adopted a selective approach based on lower eyelid retraction severity. Spacer grafting via a subconjunctival approach was the most commonly performed surgical technique (13 eyelids, 68.4%). The lateral tarsal strip procedure was used to horizontally tighten three eyelids (15.8%). At the time of the procedure, one of these eyelids (5.3%) also received an adjuvant suborbicularis oculi fat lift. Autogenous dermis fat grafting was performed on two lower eyelids (10.5%), whose retraction was caused by fat and soft tissue loss. Cosmetic outcomes were satisfactory in all cases. Conclusions To achieve satisfactory surgical outcomes, surgeons should adopt an approach based on the severity of lower eyelid retraction. Mild lower eyelid retraction can be corrected without grafts. When retraction is severe and exceeds 2 mm, spacer grafts that push the lower eyelid margin upwards and support it from below are required. PMID:28682021

Causes and Surgical Outcomes of Lower Eyelid Retraction.

PubMed

Kim, Kun Hae; Baek, Ji Sun; Lee, Saem; Lee, Jung Hye; Choi, Hye Sun; Kim, Sung Joo; Jang, Jae Woo

2017-08-01

To investigate the causes of lower eyelid retraction and evaluate the outcomes of various surgical procedures. We conducted a retrospective medical record review of patients who underwent lower eyelid retraction surgery performed by a single surgeon at Kim's Eye Hospital between 2006 and 2013. We investigated the causes of lower eyelid retraction, clinical history, characteristics, treatment, and surgical outcomes. Preoperative and postoperative margin reflex distance 2 and inferior scleral show were measured for each eyelid. Success was defined as a positive eyelid elevation and a decrease in inferior scleral show. A total of 19 lower eyelids were treated in 14 patients with lower eyelid retraction. For cosmetic reasons, surgical correction for congenital lower eyelid retraction was performed on seven eyelids (36.8%). Ten eyelids (52.6%) exhibited secondary lower eyelid retraction after surgery. One eyelid (5.3%) was affected by facial palsy and one eyelid (5.3%) exhibited exophthalmos of an unknown origin. We adopted a selective approach based on lower eyelid retraction severity. Spacer grafting via a subconjunctival approach was the most commonly performed surgical technique (13 eyelids, 68.4%). The lateral tarsal strip procedure was used to horizontally tighten three eyelids (15.8%). At the time of the procedure, one of these eyelids (5.3%) also received an adjuvant suborbicularis oculi fat lift. Autogenous dermis fat grafting was performed on two lower eyelids (10.5%), whose retraction was caused by fat and soft tissue loss. Cosmetic outcomes were satisfactory in all cases. To achieve satisfactory surgical outcomes, surgeons should adopt an approach based on the severity of lower eyelid retraction. Mild lower eyelid retraction can be corrected without grafts. When retraction is severe and exceeds 2 mm, spacer grafts that push the lower eyelid margin upwards and support it from below are required. © 2017 The Korean Ophthalmological Society

Serum-induced neurite retraction in CAD cells--involvement of an ATP-actin retractile system and the lack of microtubule-associated proteins.

PubMed

Chesta, María E; Carbajal, Agustín; Arce, Carlos A; Bisig, Carlos G

2014-11-01

Cultured catecholamine-differentiated cells [which lack the microtubule-associated proteins (MAPs): MAP1B, MAP2, Tau, STOP, and Doublecortin] proliferate in the presence of fetal bovine serum, and, in its absence, cease dividing and generate processes similar to the neurites of normal neurons. The reintroduction of serum induces neurite retraction, and proliferation resumes. The neurite retraction process in catecholamine-differentiated cells was partially characterized in this study. Microtubules in the cells were found to be in a highly dynamic state, and tubulin in the microtubules consisted primarily of the tyrosinated and deacetylated isotypes. Increased levels of acetylated or Δ2-tubulin (which are normally absent) did not prevent serum-induced neurite retraction. Treatment of differentiated cells with lysophosphatidic acid or adenosine deaminase induced neurite retraction. Inhibition of Rho-associated protein kinase, ATP depletion and microfilament disruption each (individually) blocked serum-induced neurite retraction, suggesting that an ATP-dependent actomyosin system underlies the mechanism of neurite retraction. Nocodazole treatment induced neurite retraction, but this effect was blocked by pretreatment with the microtubule-stabilizing drug paclitaxel (Taxol). Paclitaxel did not prevent serum-induced or lysophosphatidic acid-induced retraction, suggesting that integrity of microtubules (despite their dynamic state) is necessary to maintain neurite elongation, and that paclitaxel-induced stabilization alone is not sufficient to resist the retraction force induced by serum. Transfection with green fluorescent protein-Tau conferred resistance to retraction caused by serum. We hypothesize that, in normal neurons (cultured or in vivo), MAPs are necessary not only to stabilize microtubules, but also to establish interactions with other cytoskeletal or membrane components to form a stable structure capable of resisting the retraction force. © 2014 FEBS.

Does a medial retraction blade transmit direct pressure to pharyngeal/esophageal wall during anterior cervical surgery?

PubMed

Han, In Ho; Lee, Su Heon; Lee, Jae Min; Kim, Hwan Soo; Nam, Kyoung Hyup; Duetzmann, Stephan; Park, Jon; Choi, Byung Kwan

2015-01-01

A prospective study of 25 patients who underwent anterior cervical surgery. To assess retraction pressure and the exposure of pharyngeal/esophageal (P/E) wall to the medial retractor blade to clarify whether medial retraction causes direct pressure transmission to the P/E wall. Retraction pressure on P/E walls has been used to explain the relation between the retraction pressure and dysphagia or the efficacies of new retractor blades. However, it is doubtful whether the measured pressure represent real retraction pressure on the P/E wall because exposure of the P/E in the surgical field could be reduced by the shielding effect of thyroid cartilage. Epi- and endoesophageal pressures were serially measured using online pressure transducers 15 minutes before retraction, immediately after retraction, and 30 minutes after retraction. To measure the extent of P/E wall exposure to pressure transducer, we used posterior border of thyroid cartilage as a landmark. Intraoperative radiograph was used to mark the position of the posterior border of thyroid cartilage. We checked out the marked location on retractors by measuring the distance from distal retractor tip. The mean epiesophageal pressure significantly increased after retraction (0 mmHg: 88.7 ± 19.6 mmHg: 81.9 ± 15.3 mmHg). The mean endoesophageal pressure minimally changed after retraction (9.0 ± 6.6 mmHg: 15.7 ± 13.8 mmHg: 17.0 ± 14.3 mmHg). The mean location of the posterior border of thyroid cartilage was 7.3 ± 3.5 mm on the retractor blade from the tip, which means epiesophageal pressure was measured against the posterior border of thyroid cartilage, not against the P/E wall. We suggest that a medial retraction blade does not transmit direct pressure on P/E wall due to minimal wall exposure and intervening thyroid cartilage. Our result should be considered when measuring retraction pressure during anterior cervical surgery or designing novel retractor systems.

[Three dimensional finite element analysis of maxillary anterior teeth retraction with micro-implant anchorage and sliding mechanics].

PubMed

Zhang, Yi; Zhang, Lei; Fan, Yu-bo; Song, Jin-lin; Deng, Feng

2009-10-01

To investigate the biomechanical effects of micro-implant anchorage technique with sliding mechanics on maxillary anterior teeth retraction under different implant insertion heights and different retraction hook heights. The three dimensional finite element model of maxillary anterior teeth retraction force system was constructed with CT scanning and MIMICS software and the relationships between brackets, teeth, wire and micro-implant were simulating the clinical factions. Then the initial tooth displacement was calculated when the insertion heights were 4 mm and 8 mm and the retraction hook heights were 1, 4, 7, 10 mm respectively. With retraction hook height added, the anterior teeth movement changed from lingual crown tipping to labial crown tipping and the intrusion movement was more apparent when the micro-implant was inserted in a higher location. The ideal teeth movement control could be achieved by different insertion heights of micro-implant and different retraction hook heights in straight wire retraction force system.

Biometric analysis of the clinical crown and the width/length ratio in the maxillary anterior region.

PubMed

Orozco-Varo, Ana; Arroyo-Cruz, Gema; Martínez-de-Fuentes, Rafael; Jiménez-Castellanos, Emilio

2015-06-01

Restorative dentistry often involves correcting tooth size discrepancies. Therefore, dental biometrics should play an important role in the planning of an esthetic restoration. The purpose of this study was to analyze the clinical crown width, length, and width/length ratio of maxillary central incisors, lateral incisors, and canines in an adult population. The study also aimed to determine whether a correlation exists between natural tooth dimensions and the optimal tooth dimension guidelines suggested for planning esthetic restorations. Stone casts were poured from irreversible hydrocolloid impressions of 412 healthy adult participants. These casts were used to measure the maximum mesiodistal width and maximum crown-root length of the maxillary central incisors, lateral incisors, and canines with a digital precision caliper (0.01 mm). The width/length ratio was calculated for each tooth, and 40 casts were selected to test the reliability of the measuring method. The mean age of the participants in the sample was 33.94 years; 60.7% were women and 39.3% were men. The mean width value was 8.71 mm for central incisors, 6.75 mm for lateral incisors, and 7.81 mm for canines. The mean length was 10.23 mm for central incisors, 8.59 mm for lateral incisors, and 9.93 mm for canines. The average width/length ratio was 85% for central incisors and 79% for lateral incisors and canines. The data obtained from the population studied are similar to those from previous research studies with similar methodology. However, great discrepancies in the absolute values were found when compared with other studies of ideal tooth dimension guidelines on the personal preferences and the esthetic perception of dentists. The perception of what is considered natural seems to differ from what is considered esthetically perfect. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Can triggered electromyography monitoring throughout retraction predict postoperative symptomatic neuropraxia after XLIF? Results from a prospective multicenter trial.

PubMed

Uribe, Juan S; Isaacs, Robert E; Youssef, Jim A; Khajavi, Kaveh; Balzer, Jeffrey R; Kanter, Adam S; Küelling, Fabrice A; Peterson, Mark D

2015-04-01

This multicenter study aims to evaluate the utility of triggered electromyography (t-EMG) recorded throughout psoas retraction during lateral transpsoas interbody fusion to predict postoperative changes in motor function. Three hundred and twenty-three patients undergoing L4-5 minimally invasive lateral interbody fusion from 21 sites were enrolled. Intraoperative data collection included initial t-EMG thresholds in response to posterior retractor blade stimulation and subsequent t-EMG threshold values collected every 5 min throughout retraction. Additional data collection included dimensions/duration of retraction as well as pre-and postoperative lower extremity neurologic exams. Prior to expanding the retractor, the lowestt-EMG threshold was identified posterior to the retractor in 94 % of cases. Postoperatively, 13 (4.5 %) patients had a new motor weakness that was consistent with symptomatic neuropraxia (SN) of lumbar plexus nerves on the approach side. There were no significant differences between patients with or without a corresponding postoperative SN with respect to initial posterior blade reading (p = 0.600), or retraction dimensions (p > 0.05). Retraction time was significantly longer in those patients with SN vs. those without (p = 0.031). Stepwise logistic regression showed a significant positive relationship between the presence of new postoperative SN and total retraction time (p < 0.001), as well as change in t-EMG thresholds over time (p < 0.001), although false positive rates (increased threshold in patients with no new SN) remained high regardless of the absolute increase in threshold used to define an alarm criteria. Prolonged retraction time and coincident increases in t-EMG thresholds are predictors of declining nerve integrity. Increasing t-EMG thresholds, while predictive of injury, were also observed in a large number of patients without iatrogenic injury, with a greater predictive value in cases with extended duration. In addition to a careful approach with minimal muscle retraction and consistent lumbar plexus directional retraction, the incidence of postoperative motor neuropraxia may be reduced by limiting retraction time and utilizing t-EMG throughout retraction, while understanding that the specificity of this monitoring technique is low during initial retraction and increases with longer retraction duration.

Crown-root morphology of lower incisors in patients with class III malocclusion.

PubMed

Wang, Bo; Shen, Guofang; Fang, Bing; Zhang, Li

2012-07-01

The purpose of this study was to investigate the crown-root morphology of lower incisors in patients with class III malocclusion using cone-beam computed tomography. Cone-beam computed tomography images were analyzed from 53 adult class I patients (group 1), 37 preadolescent class III patients (group 2), and 66 adult class III patients (group 3) comprising 3 divisions (divisions 1, 2, and 3 corresponded to mild, moderate, and severe class III malocclusions). The size and crown-root angulations of lower incisors in different groups and divisions were statistically appraised with group 1 used as the control group. No significant differences were found for the size of lower incisors among different groups and divisions (P > 0.05). Compared with group 1, the crown-root angulations of lower incisors in groups 2 and 3 were significantly larger (P < 0.01), and among 3 divisions, the lower incisors of division 3 rather than divisions 2 and 3 exhibited larger crown-root angulations (P < 0.01). Attention should be paid to the enlarged crown-root angulations of lower incisors in class III patients during orthodontic and orthognathic treatment, especially in severe ones.

Frontonasal dysplasia: oral features, restorative and orthodontic dental treatment in a child.

PubMed

Valério, R A; Scatena, C; Santos, F R R; Romano, F L; Queiroz, A M; Paula-Silva, F W G

2017-04-01

Frontonasal dysplasia is a complex rare malformation, characterised by abnormalities involving the central portion of the face, especially the eyes, nose and forehead. It can manifest independently or associated with other abnormalities as part of some syndromes. The purpose of this case report was to describe a 5-year-old patient, diagnosed with frontonasal dysplasia. Among the abnormalities characterised with this disorder were ocular hypertelorism, broad nose tip with median notch, median facial cleft, bifid anterior skull, low set hairline, Poland's syndactyly and ankyloglossia. Consisted of behavioural management, oral hygiene instruction, prophylaxis, topical fluoride application, extraction of primary teeth, composite resin restorations and sealants in pits and fissures. Preformed metal crowns were also applied to the right and left primary maxillary second molars. Currently, the patient is 11 years-old in the permanent dentition and therefore was referred for corrective orthodontic and periodontal treatments due to the persistence of gingival retraction of the permanent mandibular right central incisor. The treatment in this case was directed to the promotion of oral health and orthodontic corrections, which are of fundamental importance due to medical, physical and social limitations of children affected by this syndrome, hindering healing and rehabilitative treatment. Paediatric dentists should be included in multidisciplinary teams providing care to patients with special needs, improving their quality of life.

Developing Customized Dental Miniscrew Surgical Template from Thermoplastic Polymer Material Using Image Superimposition, CAD System, and 3D Printing

PubMed Central

Yu, Jian-Hong; Lo, Lun-Jou; Hsu, Pin-Hsin

2017-01-01

This study integrates cone-beam computed tomography (CBCT)/laser scan image superposition, computer-aided design (CAD), and 3D printing (3DP) to develop a technology for producing customized dental (orthodontic) miniscrew surgical templates using polymer material. Maxillary bone solid models with the bone and teeth reconstructed using CBCT images and teeth and mucosa outer profile acquired using laser scanning were superimposed to allow miniscrew visual insertion planning and permit surgical template fabrication. The customized surgical template CAD model was fabricated offset based on the teeth/mucosa/bracket contour profiles in the superimposition model and exported to duplicate the plastic template using the 3DP technique and polymer material. An anterior retraction and intrusion clinical test for the maxillary canines/incisors showed that two miniscrews were placed safely and did not produce inflammation or other discomfort symptoms one week after surgery. The fitness between the mucosa and template indicated that the average gap sizes were found smaller than 0.5 mm and confirmed that the surgical template presented good holding power and well-fitting adaption. This study addressed integrating CBCT and laser scan image superposition; CAD and 3DP techniques can be applied to fabricate an accurate customized surgical template for dental orthodontic miniscrews. PMID:28280726

Treatment of horizontal root fracture: a case report

PubMed Central

Cantore, Stefania; Ballini, Andrea; Grassi, Felice Roberto

2009-01-01

Radicular fractures in permanent teeth are uncommon injuries among dental traumas, being only 0.5-7% of the cases. Traumatic dental injuries occur more frequently in young patients, and vary in severity from enamel fractures to avulsions. The magnitude of these problems is confirmed by statistical data on the prevalence of dental trauma during childhood and adolescence. Fracture occurs often in the middle-third of the root and rarely at the apical-third. The present paper reports a clinical case of a horizontal radicular fracture located between the middle- and apical-third of a upper left-central incisors followed-up over 4 years. PMID:19830049

The CHARGE association: report of two cases.

PubMed

Venetikidou, A

1993-01-01

Although many reports of the CHARGE association appear in the literature, the dental findings were never discussed before. In this report of two cases, both patients present with delayed eruption of the permanent teeth and a remarkable similarity of the eruption pattern of the mandibular teeth. One lower permanent central incisor is congenitally missing, while the other is malformed. The lower permanent laterals of JM have erupted lingually and interfere with his speech and function of the tongue. Mandibular retrognathism is present. TM had a V-shaped constricted upper arch, which was expanded in a first phase of orthodontic intervention. Fixed appliances are the future considerations for the correction of the malocclusion.

The influence of retraction agents on cytoskeleton reorganization and oxidative stress in primary human gingival fibroblasts (HGFs).

PubMed

Nowakowska, Danuta; Saczko, Jolanta; Bieżuńska-Kusiak, Katarzyna; Choromańska, Anna; Dubińska-Magiera, Magda; Ziętek, Marek; Kulbacka, Julita

2014-03-01

Contemporary gingival retraction chemicals are not without disagreeable side-effects; there appears to be no best gingival retraction agent. The aim of this research was to select the most biocompatible retraction agents based on examination of the parameters of oxidative stress in fibroblasts derived from human primary cell culture. In this in vitro study we evaluated parameters of oxidative stress after treatment with retraction agents. Visine, Afrin, Neosynephrin, Strazolin and Adrenaline were the commercial products studied as gingival retraction agents. Additionally we examined three experimental agents. We determined lipid peroxidation and protein damage and monitored changes in cellular cytoskeleton proteins. Proliferative and survival efficiency were also evaluated. Oxidative changes included by evaluated retraction agents were at the lowest level in the case of the experimental gels. Also cytoskeleton observations suggest that the experimental agents did not degrade the cellular structure of human gingival fibroblasts (HGFs). The current study was performed because of a need to project new nontoxic and save retraction agents for peridontological therapeutic usage. We suggest that the new investigational gels are most biocompatible with periodontal tissues and can be applied as new vasoconstrictor chemical retraction agents. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evaluation of laminar flow control systems for subsonic commercial transport aircraft: Executive summary

NASA Technical Reports Server (NTRS)

Pearce, W. E.

1982-01-01

An evaluation was made of laminar flow control (LFC) system concepts for subsonic commercial transport aircraft. Configuration design studies, performance analyses, fabrication development, structural testing, wind tunnel testing, and contamination-avoidance techniques were included. As a result of trade studies, a configuration with LFC on the upper wing surface only, utilizing an electron beam-perforated suction surface, and employing a retractable high-lift shield for contamination avoidance, was selected as the most practical LFC system. The LFC aircraft was then compared with an advanced turbulent aircraft designed for the same mission. This comparison indicated significant fuel savings.

KSC-05PD-1090

NASA Technical Reports Server (NTRS)

2005-01-01

KENNEDY SPACE CENTER, FLA. On Orbiter Atlantis in NASAs Orbiter Processing Facility, bay 1, a retract link assembly (upper and lower white rods) is on the left-hand main landing gear. Last week a small crack was found on the right-hand assembly. To lower the main landing gear, a mechanical linkage released by each gear actuates the doors to the open position. The landing gear reach the full-down and extended position with 10 seconds and are locked in the down position by spring-loaded downlock bungees Atlantis is scheduled to launch in September 2005 on the second Return to Flight mission, STS-121.

Endogenous fibrinolysis facilitates clot retraction in vivo.

PubMed

Samson, Andre L; Alwis, Imala; Maclean, Jessica A A; Priyananda, Pramith; Hawkett, Brian; Schoenwaelder, Simone M; Jackson, Shaun P

2017-12-07

Clot retraction refers to the process whereby activated platelets transduce contractile forces onto the fibrin network of a thrombus, which over time increases clot density and decreases clot size. This process is considered important for promoting clot stability and maintaining blood vessel patency. Insights into the mechanisms regulating clot retraction at sites of vascular injury have been hampered by a paucity of in vivo experimental models. By pairing localized vascular injury with thrombin microinjection in the mesenteric circulation of mice, we have demonstrated that the fibrin network of thrombi progressively compacts over a 2-hour period. This was a genuine retraction process, as treating thrombi with blebbistatin to inhibit myosin IIa-mediated platelet contractility prevented shrinkage of the fibrin network. Real-time confocal analysis of fibrinolysis after recombinant tissue-type plasminogen activator (tPA) administration revealed that incomplete proteolysis of fibrin polymers markedly facilitated clot retraction. Similarly, inhibiting endogenous fibrinolysis with tranexamic acid reduced retraction of fibrin polymers in vivo. In vitro clot retraction experiments indicated that subthreshold doses of tPA facilitated clot retraction through a plasmin-dependent mechanism. These effects correlated with changes in the elastic modulus of fibrin clots. These findings define the endogenous fibrinolytic system as an important regulator of clot retraction, and show that promoting clot retraction is a novel and complementary means by which fibrinolytic enzymes can reduce thrombus size. © 2017 by The American Society of Hematology.

Effects of retraction force and anchorage reinforcement on occlusal force: a model study.

PubMed

Kim, MoonHee; Seol, Kyung-sim; Lee, Yoonjung; Park, Jiman; Kim, Minji; Chun, Youn-Sic

2014-10-01

The aim of this study was to investigate the effects of retraction force and anchorage reinforcement with orthodontic mini implants on occlusal force. A strain gauge was attached to the palatal surface of the maxillary right first molar on an en masse retraction model. Occlusal forces were measured from this model, according to different retraction forces that were generated by elastic chain, under varied compressive forces (simulating masticatory forces). This retraction experiment was then performed again, after using anchorage reinforcement with an orthodontic mini implant. Occlusal force decreased as retraction force increased. The decrease showed a significant difference above 150g of retraction force (P < 0.05) and was more definite under compressive force higher than 150 N (P < 0.001). After anchorage reinforcement with the orthodontic mini implant, however, occlusal force did not significantly decrease with increasing retraction force. Significant differences in occlusal force were noted between the conditions with and without anchorage reinforcement when the applied retraction force was greater than 200g. Occlusal force tends to decrease during retraction, and this decrease can be prevented by anchorage reinforcement with orthodontic mini implants. Further investigation on the actual masticatory process in humans is required for more clear clinical implication. © The Author 2013. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Apical root resorption of incisors after orthodontic treatment of impacted maxillary canines: a radiographic study.

PubMed

Brusveen, Elin Marie Gravdal; Brudvik, Pongsri; Bøe, Olav Egil; Mavragani, Maria

2012-04-01

The purpose of the study was to evaluate impacted maxillary canines as risk factor for orthodontic apical root resorption. The sample comprised 66 patients treated with fixed appliances. Thirty-two patients with a unilateral impacted maxillary canine, which was distanced from the roots of the incisors at a preliminary phase of treatment before bonding, formed the impaction group, and 34 patients without impactions served as the controls. Root shortening was calculated by using pretreatment and posttreatment intraoral radiographs. Inclination of the eruption path of the impacted canine relative to the midline, axis of the lateral incisor, and nasal line, root development, and the medial and vertical positions of the impacted tooth were recorded on orthopantomograms and lateral cephalometric films. The follicle/tooth ratio was evaluated by using periapical radiographs. No significant difference in apical resorption of the maxillary incisors was detected between the impaction and control groups, or between the incisors of the impacted and contralateral sides in the same subject. Likewise, no difference in the severity of root resorption was found between the incisors of impacted side alone and the incisors of the control group. Mesial and vertical inclinations of the impacted canines were negatively related to a lateral incisor's root resorption. No correlations were found between resorption and medial or vertical position of the crown of the canine. The follicle/tooth ratio was significantly related to the mesial inclination of the impacted canine, but not to root resorption. An impacted maxillary canine, after being distanced from the incisor roots, does not seem to be a risk factor for apical root resorption during orthodontic treatment. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

The visibility of scientific misconduct: A review of the literature on retracted journal articles.

PubMed

Hesselmann, Felicitas; Graf, Verena; Schmidt, Marion; Reinhart, Martin

2017-10-01

Retractions of scientific articles are becoming the most relevant institution for making sense of scientific misconduct. An increasing number of retracted articles, mainly attributed to misconduct, is currently providing a new empirical basis for research about scientific misconduct. This article reviews the relevant research literature from an interdisciplinary context. Furthermore, the results from these studies are contextualized sociologically by asking how scientific misconduct is made visible through retractions. This study treats retractions as an emerging institution that renders scientific misconduct visible, thus, following up on the sociology of deviance and its focus on visibility. The article shows that retractions, by highlighting individual cases of misconduct and general policies for preventing misconduct while obscuring the actors and processes through which retractions are effected, produce highly fragmented patterns of visibility. These patterns resemble the bifurcation in current justice systems.

Chemical Retraction Agents - in vivo and in vitro Studies into their Physico-Chemical Properties, Biocompatibility with Gingival Margin Tissues and Compatibility with Elastomer Impression Materials.

PubMed

Nowakowska, Danuta; Saczko, Jolanta; Kulbacka, Julita; Wicckiewicz, Wlodzimierz

2017-01-01

Gingival margin retraction/displacement (GMR/D) is a commonly accepted procedure in restorative dentistry. Of the various retraction methods, the chemo-mechanical approach with retraction media and chemical retraction agents (ChRAs) is mostly used. Different local and/or systemic side effects were observed after "chemical attacks" from these retraction agents. Moreover, no consensus exists as to the compatibility of chemical agents with different impression materials. This paper reports the findings of in vivo and in vitro studies and we discuss the physico-chemical properties of chemical retraction agents, their undesirable clinical side effects, biological activity and compatibility with selected groups of elastomer impression materials. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Evaluation of mitochondrial NADH and brain functions during retraction using a multiparametric monitoring system

NASA Astrophysics Data System (ADS)

Barbiro-Michaely, Efrat; Arnon, Hana; Mayevsky, Avraham

2008-12-01

The use of retractors is essential in many neurosurgical procedures however, substantial evidence indicates that the use of retractors induce contusion and infraction of the retracted tissue and adjacent regions. The main effect of retraction involved a clear decreased tissue blood flow and oxygenation and a decrease in energy production. In this study we tested the effects of retraction injury in a rat model related to several aspects. We tested the effect of duration and intensity of retraction as well as compared continuous versus intermittent retraction. In order to evaluate the hemodynamic and metabolic condition of the retracted tissue, a unique multiparametric monitoring probe (MPA) was used. This probe contained optical fibers for microcirculatory blood flow (CBF) monitoring by laser Doppler flowmetry and fibers for NADH fluorometry. Additionally, the MPA contains a Camino probe for intracranial pressure (ICP) monitoring, mini-electrode for K+ extracellular level monitoring surrounded by a DC-potential electrode and ECoG electrodes. Our preliminary results showed that retraction which induced an initial ICP pressure of 25mmHg, yielded only minor and reversible changes in cerebral metabolism whereas a pressure of 50mmHg caused a significant decrease in CBF, elevation of NADH and extracellular level of K+. In the intermittent retraction model the negative effect on the cerebral tissue was significantly larger than that of the single continuous retraction model. In conclusion, the use of the MPA for the evaluation of retraction induce injury, may reveal new insights into the damage developed in the brain.

A Comparison of Cerebellar Retraction Pressures in Posterior Fossa Surgery: Extended Retrosigmoid Versus Traditional Retrosigmoid Approach.

PubMed

Liebelt, Brandon D; Huang, Meng; Britz, Gavin W

2018-05-01

The retrosigmoid approach is broadly applicable to many posterior fossa procedures. However, cerebellar retraction is often necessary for lesions in the cerebellopontine angle, which can lead to complications. An extended retrosigmoid approach skeletonizes the sigmoid sinus and allows a wider corridor with less retraction. This study investigated the differences in retraction pressure between the retrosigmoid and extended retrosigmoid approach in a cadaveric model. Anatomic dissection of 2 cadaveric heads was performed for comparison of surgical approaches. Bilateral measurements were obtained on each head, providing 4 sets of data. Retrosigmoid craniotomy was first performed with recording of retraction pressure necessary for 1.5-cm exposure. The exposure was then expanded to an extended retrosigmoid approach, and retraction pressures were recorded. Mean retraction pressure in cadaver 1 for retrosigmoid and extended retrosigmoid approaches was 20.25 ± 5.9 mm Hg and 10.25 ± 3.8 mm Hg, respectively; in cadaver 2, values were 11.75 ± 3.1 mm Hg and 4.75 ± 1.8 mm Hg, respectively. This corresponded to a mean relative reduction in retraction pressure of 49.4% in cadaver 1 and 59.6% in cadaver 2 by using the extended retrosigmoid approach. Retraction pressures were also significantly less (P < 0.05) for the extended retrosigmoid group when comparing all surgical approaches (N = 4). The extended retrosigmoid approach gains better visualization with reduced brain retraction. In our study, cerebellar retraction pressures were greatly reduced when using the extended retrosigmoid approach in a cadaveric model. Copyright © 2018. Published by Elsevier Inc.

Hard and Soft Tissue Changes Following Maxillary Distraction Osteogenesis and Mandibular Setback with Bilateral Sagittal Split Osteotomy.

PubMed

Bawane, Shilpa S; Andrade, Neelam N

2016-12-01

(1) To highlight the role of intraoral submerged device in distraction osteogenesis (DO) of patients requiring two jaw surgeries for the correction of severe developmental maxillary hypoplasia (MH) and mandibular prognathism (MP) (2) To analyse the hard and soft tissue changes following maxillary DO and mandibular setback with bilateral sagittal split osteotomy (BSSO) in patients with severe MH and MP requiring two jaw surgeries. During the period Jan 2004 to Dec 2006, five patients with severe developmental MH along with MP were treated. In 1st stage maxillary distraction was done. Distraction started on 6th postoperative day, 1 mm distraction was carried out for 10-15 days on either side. Serial radiographs were taken immediate postoperative period for baseline comparison, post-distraction and at the end of distraction. After a period of 3-4 months of distraction 2nd stage was done. In 2nd stage, mandibular setback was done with BSSO and distractors were removed under general anesthesia. Radiographs were taken immediately and at 4 months post-operatively. Cephalometric tracings were carried out preoperatively, post DO and finally after mandibular setback with BSSO. The mean horizontal movement of maxilla was 11.4 mm at ANS and 9.6 mm at A point. Upper incisor edge was advanced by 8.8 mms. SNA increased by 8.4° and SNB decreased by 4.6°. Nasal projection advanced by 4°. Nasolabial angle normalized in all patients, mean change achieved was 10.8°. Upper lip moved forward by 5.4 mm. Lower lip moved backward by 5.4 mm. Mandible positioned backward by 4 mm at B point. No vertical change occurred in the position of A, ANS and upper incisor edges. Mean increase in skeletal angle of convexity was 26.4°. Concave profile was significantly changed to convex in all patients. Maxillary DO and mandibular setback with BSSO was associated with improved facial balance and esthetics.

14 CFR 29.729 - Retracting mechanism.

Code of Federal Regulations, 2014 CFR

2014-01-01

... loads occurring during retraction and extension at any airspeed up to the design maximum landing gear... of— (1) Any reasonably probable failure in the normal retraction system; or (2) The failure of any... location and operation of the retraction control must meet the requirements of §§ 29.777 and 29.779. (g...

14 CFR 27.729 - Retracting mechanism.

Code of Federal Regulations, 2010 CFR

2010-01-01

... loads occurring during retraction and extension at any airspeed up to the design maximum landing gear... of— (1) Any reasonably probable failure in the normal retraction system; or (2) The failure of any... location and operation of the retraction control must meet the requirements of §§ 27.777 and 27.779. (g...

14 CFR 29.729 - Retracting mechanism.

Code of Federal Regulations, 2012 CFR

2012-01-01

... loads occurring during retraction and extension at any airspeed up to the design maximum landing gear... of— (1) Any reasonably probable failure in the normal retraction system; or (2) The failure of any... location and operation of the retraction control must meet the requirements of §§ 29.777 and 29.779. (g...

14 CFR 27.729 - Retracting mechanism.

Code of Federal Regulations, 2013 CFR

2013-01-01

... loads occurring during retraction and extension at any airspeed up to the design maximum landing gear... of— (1) Any reasonably probable failure in the normal retraction system; or (2) The failure of any... location and operation of the retraction control must meet the requirements of §§ 27.777 and 27.779. (g...

14 CFR 29.729 - Retracting mechanism.

Code of Federal Regulations, 2011 CFR

2011-01-01

... loads occurring during retraction and extension at any airspeed up to the design maximum landing gear... of— (1) Any reasonably probable failure in the normal retraction system; or (2) The failure of any... location and operation of the retraction control must meet the requirements of §§ 29.777 and 29.779. (g...

14 CFR 29.729 - Retracting mechanism.

Code of Federal Regulations, 2013 CFR

2013-01-01

... loads occurring during retraction and extension at any airspeed up to the design maximum landing gear... of— (1) Any reasonably probable failure in the normal retraction system; or (2) The failure of any... location and operation of the retraction control must meet the requirements of §§ 29.777 and 29.779. (g...

14 CFR 27.729 - Retracting mechanism.

Code of Federal Regulations, 2012 CFR

2012-01-01

... loads occurring during retraction and extension at any airspeed up to the design maximum landing gear... of— (1) Any reasonably probable failure in the normal retraction system; or (2) The failure of any... location and operation of the retraction control must meet the requirements of §§ 27.777 and 27.779. (g...

14 CFR 27.729 - Retracting mechanism.

Code of Federal Regulations, 2011 CFR

2011-01-01

... loads occurring during retraction and extension at any airspeed up to the design maximum landing gear... of— (1) Any reasonably probable failure in the normal retraction system; or (2) The failure of any... location and operation of the retraction control must meet the requirements of §§ 27.777 and 27.779. (g...

14 CFR 27.729 - Retracting mechanism.

Code of Federal Regulations, 2014 CFR

2014-01-01

... loads occurring during retraction and extension at any airspeed up to the design maximum landing gear... of— (1) Any reasonably probable failure in the normal retraction system; or (2) The failure of any... location and operation of the retraction control must meet the requirements of §§ 27.777 and 27.779. (g...

14 CFR 29.729 - Retracting mechanism.

Code of Federal Regulations, 2010 CFR

2010-01-01

... loads occurring during retraction and extension at any airspeed up to the design maximum landing gear... of— (1) Any reasonably probable failure in the normal retraction system; or (2) The failure of any... location and operation of the retraction control must meet the requirements of §§ 29.777 and 29.779. (g...

Neurologic complications in common wrist and hand surgical procedures

PubMed Central

Verdecchia, Nicole; Johnson, Julie; Baratz, Mark; Orebaugh, Steven

2018-01-01

Nerve dysfunction after upper extremity orthopedic surgery is a recognized complication, and may result from a variety of different causes. Hand and wrist surgery require incisions and retraction that necessarily border on small peripheral nerves, which may be difficult to identify and protect with absolute certainty. This article reviews the rates and ranges of reported nerve dysfunction with respect to common surgical interventions for the distal upper extremity, including wrist arthroplasty, wrist arthrodesis, wrist arthroscopy, distal radius open reduction and internal fixation, carpal tunnel release, and thumb carpometacarpal surgery. A relatively large range of neurologic complications is reported, however many of the studies cited involve relatively small numbers of patients, and only rarely are neurologic complications included as primary outcome measures. Knowledge of these neurologic outcomes should help the surgeon to better counsel patients with regard to perioperative risk, as well as provide insight into workup and management of any adverse neurologic outcomes that may arise.

External apical root resorption in maxillary root-filled incisors after orthodontic treatment: a split-mouth design study.

PubMed

Llamas-Carreras, José María; Amarilla, Almudena; Espinar-Escalona, Eduardo; Castellanos-Cosano, Lizett; Martín-González, Jenifer; Sánchez-Domínguez, Benito; López-Frías, Francisco Javier

2012-05-01

The purpose of this study was to compare, in a split mouth design, the external apical root resorption (EARR) associated with orthodontic treatment in root-filled maxillary incisors and their contralateral teeth with vital pulps. The study sample consisted of 38 patients (14 males and 24 females), who had one root-filled incisor before completion of multiband/bracket orthodontic therapy for at least 1 year. For each patient, digital panoramic radiographs taken before and after orthodontic treatment were used to determine the root resortion and the proportion of external root resorption (PRR), defined as the ratio between the root resorption in the endodontically treated incisor and that in its contralateral incisor with a vital pulp. The student's t-test, chi-square test and logistic regression analysis were used to determine statistical significance. There was no statistically significant difference (p > 0.05) between EARR in vital teeth (1.1 ± 1.0 mm) and endodontically treated incisors (1.1 ± 0.8 mm). Twenty-six patients (68.4%) showed greater resorption of the endodontically treated incisor than its homolog vital tooth (p > 0.05). The mean and standard deviation of PPR were 1.0 ± 0.2. Multivariate logistic regression suggested that PRR does not correlate with any of the variables analyzed. There was no significant difference in the amount or severity of external root resorption during orthodontic movement between root-filled incisors and their contralateral teeth with vital pulps.

Surgical management of retraction pockets of the pars tensa with cartilage and perichondrial grafts.

PubMed

Spielmann, P; Mills, R

2006-09-01

Stable, self-cleansing retraction pockets of the pars tensa are common incidental findings and require no treatment. In other cases, recurrent discharge occurs and there may also be associated conductive hearing loss. In a minority of cases, cholesteatoma may develop. This paper presents the results of surgery using a graft composed of cartilage and perichondrium for retraction pockets involving the posterior half of the tympanic membrane, as well as early results using a larger graft designed to manage retraction of the entire tympanic membrane. Data on 51 patients with posterior retraction pockets are presented. Forty-two (82 per cent) patients had no aural discharge one year following surgery and the tympanic membrane was not retracted in 43 (84 per cent). The larger 'Mercedes-Benz' graft was used in four patients and the results obtained suggested that it may prove a successful technique for extensive retraction pockets.

The visibility of scientific misconduct: A review of the literature on retracted journal articles

PubMed Central

Hesselmann, Felicitas; Graf, Verena; Schmidt, Marion; Reinhart, Martin

2016-01-01

Retractions of scientific articles are becoming the most relevant institution for making sense of scientific misconduct. An increasing number of retracted articles, mainly attributed to misconduct, is currently providing a new empirical basis for research about scientific misconduct. This article reviews the relevant research literature from an interdisciplinary context. Furthermore, the results from these studies are contextualized sociologically by asking how scientific misconduct is made visible through retractions. This study treats retractions as an emerging institution that renders scientific misconduct visible, thus, following up on the sociology of deviance and its focus on visibility. The article shows that retractions, by highlighting individual cases of misconduct and general policies for preventing misconduct while obscuring the actors and processes through which retractions are effected, produce highly fragmented patterns of visibility. These patterns resemble the bifurcation in current justice systems. PMID:28943647

In Vivo Investigation of the Effectiveness of a Hyper-viscoelastic Model in Simulating Brain Retraction

NASA Astrophysics Data System (ADS)

Li, Ping; Wang, Weiwei; Zhang, Chenxi; An, Yong; Song, Zhijian

2016-07-01

Intraoperative brain retraction leads to a misalignment between the intraoperative positions of the brain structures and their previous positions, as determined from preoperative images. In vitro swine brain sample uniaxial tests showed that the mechanical response of brain tissue to compression and extension could be described by the hyper-viscoelasticity theory. The brain retraction caused by the mechanical process is a combination of brain tissue compression and extension. In this paper, we first constructed a hyper-viscoelastic framework based on the extended finite element method (XFEM) to simulate intraoperative brain retraction. To explore its effectiveness, we then applied this framework to an in vivo brain retraction simulation. The simulation strictly followed the clinical scenario, in which seven swine were subjected to brain retraction. Our experimental results showed that the hyper-viscoelastic XFEM framework is capable of simulating intraoperative brain retraction and improving the navigation accuracy of an image-guided neurosurgery system (IGNS).

76 FR 42157 - Small Business Size Standards; Waiver of the Nonmanufacturer Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-18

... AGENCY: U.S. Small Business Administration. ACTION: Notice of Retraction of a Class Waiver SUMMARY: The U... refiners. On August 4, 2009, SBA published a proposed Notice of Retraction of a Waiver from the... Refineries) seeking comments on the proposed retraction of waiver. 74 FR 18584. A final Notice of Retraction...

Involvement of myosin light-chain kinase in endothelial cell retraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wysolmerski, R.B.; Lagunoff, D.

Permeabilized bovine pulmonary artery endothelial cell monolayers were used to investigate the mechanism of endothelial cell retraction. Postconfluent endothelial cells permeabilized with saponin retracted upon exposure to ATP and Ca{sup 2+}. Retraction was accompanied by thiophosphorylation of 19,000-Da myosin light chains when adenosine 5'-(gamma-({sup 35}S)thio)triphosphate was included in the medium. Both retraction and thiophosphorylation of myosin light chains exhibited a graded quantitative dependence on Ca{sup 2+}. When permeabilized monolayers were extracted in buffer D containing 100 mM KCl and 30 mM MgCl2 for 30 min, the cells failed to retract upon exposure to ATP and Ca{sup 2+}, and no thiophosphorylationmore » of myosin light chains occurred. The ability both to retract and to thiophosphorylate myosin light chains was restored by the addition to the permeabilized, extracted cells of myosin light-chain kinase and calmodulin together but not by either alone. These studies indicate that endothelial cell retraction, as does smooth muscle contraction, depends on myosin light-chain kinase phosphorylation of myosin light chains.« less

Gingival Retraction Methods: A Systematic Review.

PubMed

Tabassum, Sadia; Adnan, Samira; Khan, Farhan Raza

2017-12-01

The aim of this systematic review was to assess the gingival retraction methods in terms of the amount of gingival retraction achieved and changes observed in various clinical parameters: gingival index (GI), plaque index (PI), probing depth (PD), and attachment loss (AL). Data sources included three major databases, PubMed, CINAHL plus (Ebsco), and Cochrane, along with hand search. Search was made using the key terms in different permutations of gingival retraction* AND displacement method* OR technique* OR agents OR material* OR medicament*. The initial search results yielded 145 articles which were narrowed down to 10 articles using a strict eligibility criteria of including clinical trials or experimental studies on gingival retraction methods with the amount of tooth structure gained and assessment of clinical parameters as the outcomes conducted on human permanent teeth only. Gingival retraction was measured in 6/10 studies whereas the clinical parameters were assessed in 5/10 studies. The total number of teeth assessed in the 10 included studies was 400. The most common method used for gingival retraction was chemomechanical. The results were heterogeneous with regards to the outcome variables. No method seemed to be significantly superior to the other in terms of gingival retraction achieved. Clinical parameters were not significantly affected by the gingival retraction method. © 2016 by the American College of Prosthodontists.

A High Prevalence of Exotropia in Patients With Duane Retraction Syndrome in a Tertiary Eye Care Center in South India.

PubMed

Bhate, Manjushree; Sachdeva, Virender; Kekunnaya, Ramesh

2017-03-01

To determine the prevalence and clinical characteristics of patients with Duane retraction syndrome presenting with exotropia in a tertiary eye care center. Medical records of 140 patients with Duane retraction syndrome and exotropia (of the total 441 patients with Duane retraction syndrome) seen from 2000 to 2009 were reviewed. Characteristics studied included age at presentation, gender, laterality, manifest primary position, abnormal head posture, ocular motility, and overshoots. Data were collected regarding associated ocular or systemic abnormalities and amblyopia. The mean age of the patients at presentation was 16.96 ± 15.09 years (range: 1 to 70 years). Of the 140 patients with Duane retraction syndrome and exotropia, 59 (42%) were male. Unilateral type I Duane retraction syndrome accounted for 118 (84.2%), type II for 7 (5%), and type III for 10 (7.1%) patients, whereas 5 (3.6%) had Duane retraction syndrome and bilateral exotropia. Duane retraction syndrome was seen in the left eye, right eye, and both eyes in 97 (69%), 37 (26%), and 6 (4%) patients, respectively. Exotropia ranged from 10 to 60 prism diopters. An abnormal head posture was noted in 101 (72%) and upshoot in 26 (18.6%) patients. Reported ocular and systemic abnormalities in these patients included cataract (6), aniridia (1), nasolacrimal duct block (1), and retinal breaks (1). This is an exclusive study on a large series of patients with Duane retraction syndrome and exotropia. Almost one-third of patients with Duane retraction syndrome patients might have exotropia. Although patients with Duane retraction syndrome and exotropia had clinical characteristics and associations similar to those with Duane retraction syndrome and esotropia, there was an increased propensity for overshoots and face turn opposite to the affected eye, which the authors hypothesize to be due to a tight or short lateral rectus muscle. [J Pediatr Ophthalmol Strabismus. 2017;54(2):117-122.]. Copyright 2017, SLACK Incorporated.

[Dynamic retraction microneurosurgery for the treatment of medial tentorial meningiomas].

PubMed

Du, W; Zhong, D; Lü, D; Li, J; Huang, H Y; Yang, J; Wu, Y T; Xia, H J; Tang, W Y; Sun, X C

2018-05-08

Objective: To investigate the effectiveness and clinical significance of dynamic retraction microneurosurgery for the treatment of medial tentorial meningiomas. Methods: From January 2011 to December 2016, a cohort of 28 patients with medial tentorial meningiomas were treated by microneurosurgery at the First Affiliated Hospital of Chongqing Medical University. Patients who treated intraoperatively with dynamic retraction surgery from January 2014 to December 2016 were assigned into dynamic retraction group, and those with fixed retractors intraoperatively from January 2011 to December 2013 were assigned into retractor group. The surgical approaches tailored in our patients were based on predominant direction of tumor extension. The extent of tumor resection was scored according to the Simpson's classification scale. Comparisons of tumor size, operation time, hospitalization time, retraction-related injury, tumor Simpson resection grade and Karnofsky Performance Scale(KPS) score six months after surgery were also made between two groups. Results: A total of 12 patients(retractor group) were treated with the use of self-retaining brain retractors intraoperatively and dynamic retraction surgical procedure was performed intraoperatively in 16 patients(dynamic retraction group). The difference between two groups with regard to sex, age, tumor size, operation time and tumor Simpson resection grade was not statistically significant(all P >0.05). The mean duration of hospital time was shorter in the dynamic retraction group than that in the retractor group(18.3 d±1.8 d vs 20.2 d±1.3 d, P =0.004). The dynamic retraction group had lower incidence of retraction-related injury compared with the retractor group(1/16 vs 6/12), P =0.022]. The dynamic retraction group had better neurological recovery rate with KPS >80 evaluated six months after surgery compared with the retractor group(14/16 vs 5/12, P =0.017). Conclusions: Dynamic retraction microneurosurgery for the treatment of medial tentorial meningiomas is feasible, which can obviate or reduce the amount of brain retraction needed, and may be of help in lowering the risk of postoperative neurological deficits and complications and leading to reduced hospitalization cost and improved surgical outcomes.

Orthodontic management of a dilacerated central incisor and partially impacted canine with unilateral extraction - A case report.

PubMed

Felicita, A Sumathi

2017-10-01

To align a dilacerated maxillary central incisor and partially impacted canine with unilateral extraction in a young patient with skeletal deep bite. A 14 year old male patient reported to the hospital with skeletal deep bite (basal plane angle-17°), severe horizontal pattern of growth (Go-Gn to Sn -22°), upright maxillary incisors (U1 to NA -26°) and retroclined lower incisors (L1 to NB -11°). The maxillary left central incisor was dilacerated, and the maxillary left canine was partially impacted. Unilateral extraction of the left maxillary premolar and left mandibular central incisor was done. A canine disimpaction spring was used to align the impacted canine. An anterior bite plane was given to open the bite. Superimposition of lateral cephalogram (T1, T2) revealed bite opening, normal overjet and overbite. There was backward rotation of the mandible and increase in lower anterior facial height. There was no evidence of root resorption or loss of vitality in the dilacerated tooth. Clinically the canine was well aligned in the arch. Orthodontic management of a dilacerated incisor can be done without root resorption or loss of vitality. The partially impacted canine was well aligned in the arch. Unilateral extraction can produce good treatment results.

Dual odontogenic origins develop at the early stage of rat maxillary incisor development.

PubMed

Kriangkrai, Rungarun; Iseki, Sachiko; Eto, Kazuhiro; Chareonvit, Suconta

2006-03-01

Developmental process of rat maxillary incisor has been studied through histological analysis and investigation of tooth-related gene expression patterns at initial tooth development. The tooth-related genes studied here are fibroblast growth factor-8 (Fgf-8), pituitary homeobox gene-2 (Pitx-2), sonic hedgehog (Shh), muscle segment homeobox-1 (Msx-1), paired box-9 (Pax-9) and bone morphogenetic protein-4 (Bmp-4). The genes are expressed in oral epithelium and/or ectomesenchyme at the stage of epithelial thickening to the early bud stage of tooth development. Both the histological observation and tooth-related gene expression patterns during early stage of maxillary incisor development demonstrate that dual odontogenic origins aligned medio-laterally in the medial nasal process develop, subsequently only single functional maxillary incisor dental placode forms. The cascade of tooth-related gene expression patterns in rat maxillary incisor studied here is quite similar to those of the previous studies in mouse mandibular molar, even though the origins of oral epithelium and ectomesenchyme involved in development of maxillary incisor and mandibular molar are different. Thus, we conclude that maxillary incisor and mandibular molar share a similar signaling control of Fgf-8, Pitx-2, Shh, Msx-1, Pax-9 and Bmp-4 genes at the stage of oral epithelial thickening to the early bud stage of tooth development.

Esophageal cancer diagnosed by high-resolution manometry of the esophagus: A case report

PubMed Central

LIU, RONGBEI; CHU, HUA; XU, FEI; CHEN, SHUJIE

2016-01-01

A 48-year-old female who presented with a history of dysphagia for 5 months and regurgitation for 1 week was referred to the Sir Run Run Shaw Hospital (Hangzhou, China) for further evaluation, since the gastroscopy and endoscopic ultrasound performed in local hospitals did not reveal the presence of cancer. High-resolution manometry (HRM) of the esophagus was performed to determine the patient's condition, and revealed an abnormal high-pressure zone that was located 33 cm from the incisor and did not relax upon swallowing. Synchronous waves were observed, and the pressure of the esophageal lumen was found to increase with secondary synchronous peristaltic waves. The lower esophageal sphincter was 39 cm from the incisor and relaxed upon swallowing. The abnormal high-pressure zone could have been caused by an obstruction, and therefore an upper gastrointestinal series (barium swallow) test and gastroscopy were recommended to further pinpoint the cause. Following the two examinations, mid-esophageal cancer was considered as a possible diagnosis. A biopsy was performed and the final diagnosis was that of basaloid squamous cell carcinoma. The findings of the present study suggest that, for patients with evident symptoms of esophageal motor dysfunction without significant gastroscopy findings, HRM is recommended. PMID:27123076

[Alveolar bone thickness and root length changes in the treatment of skeletal Class III patients facilitated by improved corticotomy: a cone-beam CT analysis].

PubMed

Wu, Jiaqi; Jiang, Jiuhui; Xu, Li; Liang, Cheng; Li, Cuiying; Xu, Xiao

2015-04-01

To evaluate the alveolar bone thickness and root length changes of anterior teeth with cone-beam computed tomography (CBCT). CBCT scans were taken for 12 skeletal Class III patients who accepted the improved corticotomy (IC) procedures during pre-surgical orthodontics. The CBCT data in T1 (the maxillary dental arch was aligned and leveled) and T2 (extraction space closure) were superimposed and the alveolar bone thickness at root apex level and root length measurements were done. From T1 to T2, the buccal alveolar bone thickness for the upper lateral incisors increased from (1.89±0.83) to (2.47±1.02) mm (P<0.05), and for central incisors and for canines from (2.32±0.71) to (2.68±1.48) mm and from (2.28±1.08) to (2.41±1.40) mm, respectively. According to Sharpe Grading System, the root resorption grade for 69 teeth of 72 was located in Grade 1, two teeth in Grade 2, one tooth in Grade 3. The improved corticotomy had the potential to increase the buccal alveolar bone thickness and the root resorption in most teeth was in Grade 1 according to Sharpe grading system.

Effects of fixed functional therapy on tongue and hyoid positions and posterior airway.

PubMed

Ozdemir, Fulya; Ulkur, Feyza; Nalbantgil, Didem

2014-03-01

To evaluate how therapy with a fixed functional appliance affects airway dimensions, dentoalveolar changes, and tongue and hyoid positions. A retrospective study was carried out on 46 pre- and posttreatment lateral cephalometric radiographs of 23 post-peak Class II patients (12 girls, 11 boys) treated with a Forsus Fatigue Resistant Device (FRD) appliance. The radiographies were taken at the start and at the end of Forsus FRD appliance therapy when a Class I or overcorrected Class I canine and molar relationship was achieved. The process took an average of 5 months 13 days ± 1 month 4 days. Skeletal and dental parameters were measured using Dolphin software, and the sagittal airway area was measured by AutoCAD software. Analyses of the pre- and posttreatment means revealed that there was no statistically significant skeletal correction of the sagittal malocclusion; increase of lower incisor inclination, decrease of upper incisor inclination, decrease of interincisal angle, and rotation of occlusal plane all contributed to the reduction of overjet. The tongue area and intermaxillary space area increased in response to these dentoalveolar changes; however, there was no statistically significant change in the hyoid position or the oropharyngeal area between the two time points. The dentoalveolar changes produced by Forsus FRD appliance did not cause any significant posterior airway changes in young adult patients.

Retraction notice to "Biomass supply chain optimisation for Organosolv-based biorefineries" [Bioresour. Technol. 159 (2014) 387-396].

PubMed

Giarola, Sara; Patel, Mayank; Shah, Nilay

2014-11-01

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Authors. This article has been retracted because it includes important elements of an unpublished model which has been developed by others. The authors believe that the most responsible course of action is to retract their paper. The Authors deeply regret this circumstance and apologize to the scientific community. Copyright © 2014 Elsevier Ltd. All rights reserved.

Causes of hepatic capsular retraction: a pictorial essay.

PubMed

Tan, Gary Xia Vern; Miranda, Rhian; Sutherland, Tom

2016-12-01

Hepatic capsular retraction refers to the loss of the normal convex hepatic contour, with the formation of an area of flattening or concavity. This can result from myriad causes, including intrinsic hepatic conditions such as cirrhosis, biliary obstruction, benign tumours, malignancy and infections, as well as extrahepatic causes such as trauma. This article aims to provide familiarity with this wide spectrum of conditions, including mimics of hepatic capsular retraction, by highlighting the anatomic, pathologic and imaging features that help distinguish these entities from one another. • Hepatic capsular retraction can occur due to various intrinsic or extrinsic hepatic causes. • Hepatic capsular retraction is observed in both benign and malignant conditions. • Recognising associated imaging features can help elicit causes of hepatic capsular retraction.

KENNEDY SPACE CENTER, FLA. - The White Room is seen at the upper left where the astronauts enter the Space Shuttle for flight. The Rotating Service Structure has been retracted at KSC's Launch Pad 39A. Discovery, the orbiter for the STS-82 mission, is ready for the launch of the second Hubble Space Telescope service mission. The payload consists of the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) that will be installed, Fine Guidance Sensor #1 (FGS-1), and the Space Telescope Imaging Spectrograph (STIS) to be installed. The STS-82 will launch with a crew of seven at 3:54 a.m. EST, Feb. 11, 1997. The launch window is 65 minutes in duration. The Mission Commander for STS-82 is Ken Bowersox. The purpose of the mission is to upgrade the scientific capabilities, service or replace aging components on the Telescope, and provide a reboost to the optimum altitude.

NASA Image and Video Library

1997-02-10

KENNEDY SPACE CENTER, FLA. - The White Room is seen at the upper left where the astronauts enter the Space Shuttle for flight. The Rotating Service Structure has been retracted at KSC's Launch Pad 39A. Discovery, the orbiter for the STS-82 mission, is ready for the launch of the second Hubble Space Telescope service mission. The payload consists of the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) that will be installed, Fine Guidance Sensor #1 (FGS-1), and the Space Telescope Imaging Spectrograph (STIS) to be installed. The STS-82 will launch with a crew of seven at 3:54 a.m. EST, Feb. 11, 1997. The launch window is 65 minutes in duration. The Mission Commander for STS-82 is Ken Bowersox. The purpose of the mission is to upgrade the scientific capabilities, service or replace aging components on the Telescope, and provide a reboost to the optimum altitude.

RETRACTED: Rift-related active fault-system and a direction of maximum horizontal stress in the Cairo-Suez district, northeastern Egypt: A new approach from EMR-Technique and Cerescope data

NASA Astrophysics Data System (ADS)

Hagag, Wael; Obermeyer, Hennes

2016-09-01

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of Editor-in-Chief Read Mapeo in agreement with Editor-in-Chief Damien Delvaux. The authors have plagiarized part of the following papers. The introduction and methodology sections of the paper are similar and in places slightly modified versions of the abstract, introduction and sections 2.4.2.1 and 2.4.2.2 of the PhD Thesis of Michael Krumbholz (2010) https://ediss.uni-goettingen.de/handle/11858/00-1735-0000-0006-B2EB-A. Text from the sections of introduction, methodology and "EMR-measurements in the Cairo-Suez district" is found also in the paper "Detection of active faults using EMR-Technique and Cerescope at Landau area in central Upper Rhine Graben, SW Germany" that was published by the authors in the Journal of Applied Geophysics 124 (2016) 117-129 http://dx.doi.org/10.1016/j.jappgeo.2015.11.019. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.

Effects of low-intensity laser therapy on the rate of orthodontic tooth movement: A clinical trial

PubMed Central

Kansal, Ankur; Kittur, Nandan; Kumbhojkar, Vinayak; Keluskar, Kanhoba Mahabaleshwar; Dahiya, Parveen

2014-01-01

Background: Low-intensity laser therapy (LILT) can be utilized for different treatments in the field of orthodontics and dentofacial orthopedics. The aim of the present study was to evaluate the efficacy of LILT on (1) the rate of canine movement during canine retraction phase and (2) evaluate the radiographic changes occurring during LILT around the irradiated area. Materials and Methods: A total of 10 patients of both genders were included for this study. One quadrant of the upper arch was considered control group (CG) and received mechanical activation of the canine teeth with 150 g. The opposite quadrant received the same mechanical activation and was also irradiated with a diode emitting light (gallium-arsenide laser) at 904 nm, for 10 s at 12 mW, at 4.2 J/cm2. Laser application was done on 1st day, 3rd, 7th, 14th, 21th, 28th, 35th, 42nd, 49th, 56th day respectively during the canine retraction phase. Distance was measured on 1st day, 35th day and 63rd day and appliance activation was done on 1st and 35th day. Results were analyzed using t-test with the significance level set at P < 0.01. Results: Mean value obtained from 1st to 63rd day was 3.30 ± 2.36 mm for CG and 3.53 ± 2.30 mm for laser group (LG). Conclusion: There was no statistically significant difference in the rate of tooth movement during canine retraction between the LG and the CG. There was no evidence of any pathologic changes in the radiograph following LILT. PMID:25225562

Biomechanics of volunteers subject to loading by a motorized shoulder belt tensioner.

PubMed

Good, Craig A; Viano, David C; Ronsky, Janet L

2008-04-15

A biomechanical study using human volunteers. Motorized shoulder belt tensioning is a new seatbelt technology that is likely to be incorporated into future vehicles. The objective of this study was to characterize the upper torso biomechanics of 3 sizes of adult volunteers (5th percentile female, 50th percentile male, and 95th percentile male) subjected to motorized shoulder belt tensioning in the static environment. There is a lack of volunteer data concerning the biomechanics of occupants subject to motorized precrash shoulder belt tensioning. Studies of torso repositioning by the air force for ejection seats are much too aggressive to be relevant to motorized systems. Low-level motorized shoulder belt tensioning is well tolerated by vehicle occupants but optimized performance by occupant size is unknown. Nineteen male and 6 female subjects were instrumented in a fixture designed to support the occupant leaning forward and apply seatbelt tension. The subjects were 5th percentile females, 50th percentile males, and 95th percentile males. Reflective markers were placed on the subjects to monitor torso kinematics during tensioning. Changes in spinal curvature were small during shoulder belt tensioning and the angular motion of the torso originated within 4.2 cm of the pelvis-femur junction or H-point. Torso repositioning and retraction timing was found to be: 54.3 degrees in 0.78 seconds for the 5th percentile female, 57.6 degrees in 0.95 seconds for the 50th percentile male, and 42.2 degrees in 0.92 seconds for the 95th percentile male. Occupant size has a significant effect on retraction time to reposition the torso during shoulder belt tensioning. Larger vehicle occupants require more time because of a slower retraction velocity. The results are sufficiently simple that a lumped-mass model can predict tensioning kinetics.

Determinants of permanent first incisor eruption in grazing Australian Angora goats.

PubMed

McGregor, B A; Butler, K L

2011-12-01

To investigate the effects of live weight, sex and other factors on deciduous (first incisor) loss and permanent first incisor development in Angora goats. Goats were part of a pen study on the effects of energy intake in Angora does during pregnancy and lactation on kid growth and development. The design was three levels of nutrition in mid-pregnancy × two levels of postnatal nutrition in 17 randomised blocks. Conception times were calculated by using artificial insemination, with ultrasound examination 43 days after insemination. Does were fed different amounts of a formulated diet in their pens. After weaning, goats were grazed in sex groups. Deciduous first incisor loss and permanent first incisor development were recorded at 11 time points from 14 to 20 months of age. For each sex, the time for visible eruption and full development of permanent first incisor declined linearly with increased live weight by 5.9 and 5.4 days/kg live weight, respectively. The time to reach similar development stages for first permanent incisors eruption was 3 months longer for the lightest animals compared with the heaviest animals. Date of birth, birth weight, doe age, growth rates, mid-pregnancy and postnatal nutrition, parity, day of weaning and weaning weight had no detectable effect. The results explain much of the substantial range in reported first permanent incisor eruption dates for small ruminants and have application in ageing of goats, marketing of kids for meat, in the selection of animals for breeding flocks and in educational material. © 2011 The Authors. Australian Veterinary Journal © 2011 Australian Veterinary Association.

Do different vertical positions of maxillary central incisors influence smile esthetics perception?

PubMed

Menezes, Erica Bretas Cabral; Bittencourt, Marcos Alan Vieira; Machado, Andre Wilson

2017-01-01

The purpose of this study was to determine the perception of smile esthetics among orthodontists and layperson, with respect to different maxillary central incisors vertical positions in full-face and close-up smile analyses. Frontal photographs of the smiles of two adult women were used. Images were altered to create a symmetrical image with the gingival margin levels of the maxillary canines matching the central incisors and a 1.0-mm central-to-lateral incisal step. Later, the images were altered in order to create six different central incisor vertical positions in 0.5-mm increments. The images were randomly assembled in an album, which was given to 114 judges, 57 orthodontists and 57 laypersons, who were asked to evaluate the attractiveness of the images using the visual analog scale. The data collected were statistically analyzed by means of 1-way analysis of variance with the Tukey post-hoc test and the Student t test. The highest rated smiles showed two notable characteristics: a) the central incisor gingival margins matched or were 0.5 mm below the line of the canine gingival margins and; b) the central-to-lateral incisal step was 1.0 to 1.5 mm. The worst smiles showed two notable characteristics: a) the central incisor gingival margins were 1.0 mm above or 1.5 mm below the canine gingival margins and; b) no step between the centrals and laterals or a 2.5-mm step. The vertical position of the maxillary central incisors significantly affected the perception of the smile esthetics, whereas slightly extruded central incisors were more esthetically preferred than intruded.

An Analysis of Maxillary Anterior Teeth Dimensions for the Existence of Golden Proportion: Clinical Study.

PubMed

Sandeep, Nalla; Satwalekar, Parth; Srinivas, Siva; Reddy, Chandra Sekhar; Reddy, G Ramaswamy; Reddy, B Anantha

2015-09-01

Appearance of the face is a great concern to everyone, as it is a significant part of self-image. The study analyzed the clinical crown dimensions of the maxillary anterior teeth with respect to their apparent mesiodistal widths, width-to-height ratio to determine whether golden proportion existed among the South Indian population. A total of 240 dentulous subjects were chosen for the study (120 males and 120 females) age ranging between 18 and 28 years. Full face and anterior teeth images of the subjects were made on specially designed device resembling a face-bow, mounted onto the wall under a standard light source. The width and height of the maxillary central incisors were measured on the stone casts using a digital caliper. The mean perceived maxillary lateral incisor to central incisor width ratio was 0.67 in males and 0.703 in females. The mean perceived maxillary canine to lateral incisor width ratio was 0.744 in males and 0.714 in females. The mean width-to-height ratio of the maxillary central incisor was 79.49% in males and 79.197% in females. The golden proportion was not found between perceived mesiodistal widths of maxillary central and lateral incisors and nor between perceived mesiodistal widths of maxillary lateral incisors and canines. In the majority of subjects, the width-to-height ratio of maxillary central incisor was within 75-80%. There are no statistically significant differences in maxillary anterior teeth proportions between males and females. The results may serve as guidelines for treatment planning in restorative dentistry and periodontal surgery.

External apical root resorption in maxillary root-filled incisors after orthodontic treatment: A split-mouth design study

PubMed Central

Amarilla, Almudena; Espinar-Escalona, Eduardo; Castellanos-Cosano, Lizett; Martín-González, Jenifer; Sánchez-Domínguez, Benito; López-Frías, Francisco J.

2012-01-01

Introduction: The purpose of this study was to compare, in a split mouth design, the external apical root resorption (EARR) associated with orthodontic treatment in root-filled maxillary incisors and their contralateral teeth with vital pulps. Methodology: The study sample consisted of 38 patients (14 males and 24 females), who had one root-filled incisor before completion of multiband/bracket orthodontic therapy for at least 1 year. For each patient, digital panoramic radiographs taken before and after orthodontic treatment were used to determine the root resortion and the proportion of external root resorption (PRR), defined as the ratio between the root resorption in the endodontically treated incisor and that in its contralateral incisor with a vital pulp. The student’s t-test, chi-square test and logistic regression analysis were used to determine statistical significance. Results: There was no statistically significant difference (p > 0.05) between EARR in vital teeth (1.1 ± 1.0 mm) and endodontically treated incisors (1.1 ± 0.8 mm). Twenty-six patients (68.4%) showed greater resorption of the endodontically treated incisor than its homolog vital tooth (p > 0.05). The mean and standard deviation of PPR were 1.0 ± 0.2. Multivariate logistic regression suggested that PRR does not correlate with any of the variables analyzed. Conclusions: There was no significant difference in the amount or severity of external root resorption during orthodontic movement between root-filled incisors and their contralateral teeth with vital pulps. Key words:Endodontics, orthodontics, root canal treatment, root resorption. PMID:22143731

Orthodontic management of congenitally missing maxillary lateral incisors: a case report.

PubMed

Paduano, Sergio; Cioffi, Iacopo; Rongo, Roberto; Cupo, Antonello; Bucci, Rosaria; Valletta, Rosa

2014-01-01

This case report describes the orthodontic treatment of a woman, aged 15 years, with permanent dentition, brachyfacial typology, with congenitally missing maxillary lateral incisors. Multibracket straightwire fixed appliance was used to open the space for dental implant placement, and treat the impaired occlusion. The missing lateral incisors were substituted with oral implants.

[Indirect usage of miniscrew anchorage to intrude overerupted mandibular incisors in a Class II patient with a deep overbite].

PubMed

Ishihara, Yoshihito; Kuroda, Shingo; Sugawara, Yasuyo; Balam, Tarek A; Takano-Yamamoto, Teruko; Yamashiro, Takashi

2016-06-01

Vertical dentoalveolar discrepancies are a common problem in orthodontic patients but are often difficult to treat with traditional mechanics. This case report illustrates the successful treatment of overerupted mandibular incisors via the indirect use of miniscrew anchorage. A woman (age, 22 years 9 months) had chief complaints of maxillary incisor protrusion and crooked teeth. An excessive curve of Spee caused by elongation of the mandibular incisors was also found. The patient was diagnosed with a severe Class II Division 1 malocclusion and a deep overbite. After extraction of the mandibular first premolars and the subsequent leveling phase, the elongated incisors were intruded with a novel method, which involved the combined use of sectional archwires and miniscrews placed in the premolar areas. After the procedure, the mandibular incisors had been intruded by 6.5 mm with no undesirable side effects. The total active treatment period was 42 months. The resultant occlusion and satisfactory facial profile were maintained after 30 months of retention. Our novel intrusion approach shows potential for correcting a deep overbite. © EDP Sciences, SFODF, 2016.

Management of 2 teeth diagnosed with dens invaginatus with regenerative endodontics and apexification in the same patient: a case report and review.

PubMed

Kumar, Harleen; Al-Ali, Muna; Parashos, Peter; Manton, David J

2014-05-01

This review and case report present the treatment of a 10-year-old boy with both permanent maxillary lateral incisors demonstrating Oehlers type II dens invaginatus and pulpal involvement. Treatment was complicated by dental anxiety, supraventricular tachycardia, immature tooth development, and facial cellulitis. An infected necrotic pulp of the permanent maxillary left lateral incisor was treated by apexification and endodontic treatment with mineral trioxide aggregate. The necrotic pulp of the permanent maxillary right lateral incisor was treated with canal debridement and dressing under general anesthesia. Periapical healing of both teeth occurred, with the right lateral incisor showing continued root growth, thickening of the dentinal root walls, and completed apex formation. This tooth responded normally to pulp testing. Twenty-eight months after initial treatment, the right lateral incisor displayed progressive sclerosis of the canal. This case demonstrates possible pulpal regeneration of an infected maxillary right lateral incisor with dens invaginatus and an immature apex after minimal canal debridement. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Orthodontic treatment of severe anterior open bite and alveolar bone defect complicated by an ankylosed maxillary central incisor: a case report.

PubMed

Lin, Feiou; Sun, Hao; Yao, Linjie; Chen, Qiushuo; Ni, Zhenyu

2014-11-21

Incisor trauma is common in children, and can cause severe complications during adolescent growth and development. This report describes the treatment of a 16-year-old patient with severe anterior open bite due to ankylosis of the maxillary left incisor after dental trauma as an 8-year-old. No examination or active treatment was undertaken until he was 16 years old. Clinical examination revealed that the maxillary left incisor was severely intruded accompanied by a vertical alveolar bone defect. Orthodontic treatment combined with surgical luxation took 3 years and 7 months. During treatment, the intruded incisor was moved to the occlusal level and the alveolar bone defect was restored, achieving normal occlusion. After two years of retention, the maxillary left incisor was retained in a stable normal position with a slightly reduced overbite. This case demonstrates that surgical luxation with orthodontic traction can be an effective approach, especially when the ankylosed tooth has a single root. Long-term monitoring of orthodontic stability and the maintenance of periodontal health are crucial in the post-treatment period.

Myosin II-interacting guanine nucleotide exchange factor promotes bleb retraction via stimulating cortex reassembly at the bleb membrane.

PubMed

Jiao, Meng; Wu, Di; Wei, Qize

2018-03-01

Blebs are involved in various biological processes such as cell migration, cytokinesis, and apoptosis. While the expansion of blebs is largely an intracellular pressure-driven process, the retraction of blebs is believed to be driven by RhoA activation that leads to the reassembly of the actomyosin cortex at the bleb membrane. However, it is still poorly understood how RhoA is activated at the bleb membrane. Here, we provide evidence demonstrating that myosin II-interacting guanine nucleotide exchange factor (MYOGEF) is implicated in bleb retraction via stimulating RhoA activation and the reassembly of an actomyosin network at the bleb membrane during bleb retraction. Interaction of MYOGEF with ezrin, a well-known regulator of bleb retraction, is required for MYOGEF localization to retracting blebs. Notably, knockout of MYOGEF or ezrin not only disrupts RhoA activation at the bleb membrane, but also interferes with nonmuscle myosin II localization and activation, as well as actin polymerization in retracting blebs. Importantly, MYOGEF knockout slows down bleb retraction. We propose that ezrin interacts with MYOGEF and recruits it to retracting blebs, where MYOGEF activates RhoA and promotes the reassembly of the cortical actomyosin network at the bleb membrane, thus contributing to the regulation of bleb retraction. © 2018 Jiao et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Structured box training improves stability of retraction while multitasking in colorectal surgery simulation.

PubMed

Kobiela, Jarek; Spychalski, Piotr; Łaski, Dariusz; Błażyńska-Spychalska, Agata; Łachiński, Andrzej J; Śledziński, Zbigniew; Hull, Tracy

2018-09-01

Laparoscopic colorectal surgery has an established role. The ability to multitask (use a retraction tool with one hand and navigate a laparoscopic camera with the other) is desired for efficient laparoscopic surgery. Surgical trainees must learn this skill to perform advanced laparoscopic tasks. The aim was to determine whether a box-training protocol improves the stability of retraction while multitasking in colorectal surgery simulation. Fifty-eight medical students were recruited to attend a basic laparoscopic box-training course. Ability to perform steady retraction with and without multitasking was measured initially and at the conclusion of the course. Before training, students demonstrated a decrease in performance while multitasking with a greater maximal exerted force, a greater range of force, and a greater standard deviation for traction and minimal exerted force, range of force and a greater standard deviation for countertraction. Statistically significant improvement (lower maximal exerted force and lower range of force) was observed for traction while multitasking after training. After the training, no statistically significant differences were found when the student performed a single task versus multitasking, both for traction and countertraction. A structured box-training curriculum improved the stability of retraction while multitasking in this colorectal surgery simulation. Although it did not improve stability of retraction as a single task, it did improve stability of retraction while multitasking. After training, this enables the trainee to retract as efficiently while operating the camera as they retract when only focusing on retraction as a single task. Copyright © 2018 Elsevier Inc. All rights reserved.

Comparative study between conventional en-masse retraction (sliding mechanics) and en-masse retraction using orthodontic micro implant.

PubMed

Basha, Asim Ghouse; Shantaraj, Ravi; Mogegowda, Shivalinga B

2010-04-01

The purpose of this study was to measure and compare the difference between rate of en-masse retraction with mini-implant and molar anchorage. A comparative study consisting of 14 patients (all females) randomized into 2 groups. Seven in group I (nonimplant) molar was used as anchor for en-masse retraction of anterior teeth (mean age 16 years SD +/- 1.41). In group II (implant), mini-implant was used as anchorage to retract the anterior teeth (mean age 17.36 SD +/- 1.35). In both groups, all first premolars were extracted. After leveling and aligning, surgical steel mini-implant of 1.3 mm in diameter and 8 mm in length were placed between the roots of second premolar and first molar in the maxilla in the implant group. Implants were immediately loaded with 2 N of force. In nonimplant group molar was used as anchorage. The retraction and postretraction lateral cephalograms were taken. Rate of retraction and anchor loss were measured by using pterygoid vertical in maxilla. Four implants became loose during the treatment, which were subsequently replaced. The stability of surgical steel in this study was 71.4%. Student t test were used to analyze the treatment charges in 2 groups. Mean anchor loss in maxilla in nonimplant group. No differences in the mean rate of retraction time were noted in both groups. Mini-implants provided absolute anchorage in patients requiring maximum anterior retraction. No differences in the mean retraction time were noted between 2 groups.

Corticotomy-assisted retraction: an outcome assessment.

PubMed

Sakthi, S Vijayashri; Vikraman, B; Shobana, V R; Iyer, S Kavitha; Krishnaswamy, N R

2014-01-01

To assess the efficiency and treatment outcome of patients treated with corticotomy-assisted en-masse orthodontic retraction as compared with the en-masse retraction without corticotomy. Forty adult patients with bimaxillary protrusion requiring correction of bidental proclination constituted the sample. The study group consisted of 22 patients (male 11, female 11) willing to undergo surgery to reduce the duration of their orthodontic treatment and 18 patients (male 9, female 9) desirous of undergoing conventional orthodontic treatment without surgical intervention constituted the control group. Comparison of rate of retraction and anchor loss between the study and the control group was assessed. Average rate of space closure of 1.8 mm/month in the maxilla and 1.57 mm/month in the mandible was observed in the study group compared to 1.02 mm/month in the maxilla and 0.87 mm/month in the mandible in the control group. The rate of retraction accelerated during the first 2 months of retraction. Molar anchor loss of approximately 0.6 mm occurred in the study group, and 1.8 mm occurred in the control group during the 4 months. The rate of retraction with study group was twice as faster when compared to the control group, accelerating during the first 2 months of retraction. There was better anchorage control with the undecorticated molar segment during the retraction period but was found to increase as time advanced.

Lower lid retraction in thyroid orbitopathy: lamellar shortening or proptosis?

PubMed

Rajabi, Mohammad Taher; Jafari, Hajar; Mazloumi, Mehdi; Tabatabaie, Syed Ziaeddin; Rajabi, Mohammad Bagher; Hasanlou, Narges; Abtahi, Seyed-Mojtaba; Goldberg, Robert A

2014-08-01

To investigate any correlation between lower lid retraction and proptosis and also between lower lid retraction and lamellar length, as measured by fornix depth, in patients with thyroid eye disease (TED). One hundred and sixty-six eyes of 83 patients with TED were enrolled. The inferior fornix depth, Hertel exophthalmometry measurement, clinical activity score, and lower lid position were the main outcome variables. The correlation between lower lid position measurement and Hertel measurements and also between the lower lid position measurement and inferior fornix depth were evaluated using ANOVA and Pearson's tests. The mean age of subjects in patients with and without lid retraction was 42.8 ± 1.5 and 47.7 ± 1.6 years, respectively (P = 0.4). The inferior fornix depth in patients with and without lower lid retraction was 11.8 ± 1.5 and 11.8 ± 1.3 mm, respectively (P = 0.960). Pearson's analysis showed a significant correlation between the degree of proptosis and lower lid retraction in TED patients (P = 0.01). However, no significant correlation was found between the level of lower lid retraction and the fornix depth (P = 0.87). The main cause of lower lid retraction in TED is proptosis. The beneficial effect of orbital decompression on improvement of lower lid retraction must be considered during a stepwise surgical approach in TED patients.

Effect of annealing ambient on anisotropic retraction of film edges during solid-state dewetting of thin single crystal films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Gye Hyun; Thompson, Carl V., E-mail: cthomp@mit.edu; Ma, Wen

During solid-state dewetting of thin single crystal films, film edges retract at a rate that is strongly dependent on their crystallographic orientations. Edges with kinetically stable in-plane orientations remain straight as they retract, while those with other in-plane orientations develop in-plane facets as they retract. Kinetically stable edges have retraction rates that are lower than edges with other orientations and thus determine the shape of the natural holes that form during solid-state dewetting. In this paper, measurements of the retraction rates of kinetically stable edges for single crystal (110) and (100) Ni films on MgO are presented. Relative retraction ratesmore » of kinetically stable edges with different crystallographic orientations are observed to change under different annealing conditions, and this accordingly changes the initial shapes of growing holes. The surfaces of (110) and (100) films were also characterized using low energy electron diffraction, and different surface reconstructions were observed under different ambient conditions. The observed surface structures were found to correlate with the observed changes in the relative retraction rates of the kinetically stable edges.« less

Correlation Between Cerebellar Retraction and Hearing Loss After Microvascular Decompression for Hemifacial Spasm: A Prospective Study.

PubMed

Li, Ning; Zhao, Wei-Guo; Pu, Chun-Hua; Yang, Wen-Lei

2017-06-01

This study prospectively investigated the relationship between cerebellar retraction factors measured on preoperative magnetic resonance and the development of postoperative hearing loss and evaluated their potential role in predicting the possibility of hearing loss after microvascular decompression (MVD) for hemifacial spasm (HFS). The study included 110 patients clinically diagnosed with primary HFS who underwent MVD in our department. The cerebellar retraction factors were quantitatively measured on preoperative magnetic resonance. Associations of cerebellar retraction and other risk factors with postoperative hearing loss were analyzed. Eleven patients (10%) developed nonserviceable hearing loss after MVD. Compared with the group without hearing loss, the cerebellar retraction distance and depth of the group with hearing loss were significantly greater (P < 0.05). Multivariate logistic regression analysis showed that greater cerebellar retraction depth was significantly associated with the higher incidence of postoperative hearing loss (P < 0.05). The results in this study strongly suggested the correlation between the cerebellar retraction depth and the possibility of hearing loss after MVD for HFS. In addition, cerebellar retraction depth could be considered as a useful tool to predict the risk of post-MVD hearing loss. Copyright © 2017 Elsevier Inc. All rights reserved.

Differences between dentitions with palatally and labially located maxillary canines observed in incisor width, dental morphology and space conditions.

PubMed

Artmann, L; Larsen, H J; Sørensen, H B; Christensen, I J; Kjaer, I

2010-06-01

To analyze the interrelationship between incisor width, deviations in the dentition and available space in the dental arch in palatally and labially located maxillary ectopic canine cases. Size: On dental casts from 69 patients (mean age 13 years 6 months) the mesiodistal widths of each premolar, canine and incisor were measured and compared with normal standards. Dental deviations: Based on panoramic radiographs from the same patients the dentitions were grouped accordingly: Group I: normal morphology; Group IIa: deviations in the dentition within the maxillary incisors only; Group IIb: deviations in the dentition in general. Descriptive statistics for the tooth sizes and dental deviations were presented by the mean and 95% confidence limits for the mean and the p-value for the T-statistic. Space: Space was expresses by subtracting the total tooth sizes of incisors, canines and premolars from the length of the arch segments. Size of lateral maxillary incisor: The widths of the lateral incisors were significantly different in groups I, IIa and IIb (p=0.016) and in cases with labially located ectopic canines on average 0.65 (95% CI:0.25-1.05, p=0.0019) broader than lateral incisors in cases with palatally located ectopic canines. Space: Least available space was observed in cases with labially located canines. The linear model did show a difference between palatally and labially located ectopic canines (p=0.03). Space related to deviations in the dentition: When space in the dental arch was related to dental deviations (groups I, IIa and IIb), the cases in group IIb with palatally located canines had significantly more space compared with I and IIa. Two subgroups of palatally located ectopic maxillary canine cases based on registration of space, incisor width and deviations in the morphology of the dentition were identified.

Eye retraction in the giant guitarfish, Rhynchobatus djiddensis (Elasmobranchii: Batoidea): a novel mechanism for eye protection in batoid fishes.

PubMed

Tomita, Taketeru; Murakumo, Kiyomi; Miyamoto, Kei; Sato, Keiichi; Oka, Shin-ichiro; Kamisako, Haruka; Toda, Minoru

2016-02-01

Eye retraction behavior has evolved independently in some vertebrate linages such as mudskippers (fish), frogs and salamanders (amphibians), and cetaceans (mammals). In this paper, we report the eye retraction behavior of the giant guitarfish (Rhynchobatus djiddensis) for the first time, and discuss its mechanism and function. The eye retraction distance was nearly the same as the diameter of the eyeball itself, indicating that eye retraction in the giant guitarfish is probably one of the largest among vertebrates. Eye retraction is achieved by unique arrangement of the eye muscle: one of the anterior eye muscles (the obliquus inferior) is directed ventrally from the eyeball and attaches to the ventral surface of the neurocranium. Due to such muscle arrangement, the obliquus inferior can pull the eyeball ventrally. This mechanism was also confirmed by electrical stimulation of the obliquus inferior. The eye retraction ability of the giant guitarfish likely represents a novel eye protection behavior of elasmobranch fishes. Copyright © 2015 Elsevier GmbH. All rights reserved.

In Vivo Investigation of the Effectiveness of a Hyper-viscoelastic Model in Simulating Brain Retraction

PubMed Central

Li, Ping; Wang, Weiwei; Zhang, Chenxi; An, Yong; Song, Zhijian

2016-01-01

Intraoperative brain retraction leads to a misalignment between the intraoperative positions of the brain structures and their previous positions, as determined from preoperative images. In vitro swine brain sample uniaxial tests showed that the mechanical response of brain tissue to compression and extension could be described by the hyper-viscoelasticity theory. The brain retraction caused by the mechanical process is a combination of brain tissue compression and extension. In this paper, we first constructed a hyper-viscoelastic framework based on the extended finite element method (XFEM) to simulate intraoperative brain retraction. To explore its effectiveness, we then applied this framework to an in vivo brain retraction simulation. The simulation strictly followed the clinical scenario, in which seven swine were subjected to brain retraction. Our experimental results showed that the hyper-viscoelastic XFEM framework is capable of simulating intraoperative brain retraction and improving the navigation accuracy of an image-guided neurosurgery system (IGNS). PMID:27387301

Morphea "en coup de sabre": An unusual oral presentation.

PubMed

Niklander, Sven; Marín, Constanza; Martínez, René; Esguep, Alfredo

2017-02-01

Morphea, or localized scleroderma, is an inflammatory disease that leads to sclerosis of the skin and underlying tissues due to excessive collagen deposition. Oral involvement is unusual and it may produce white linear fibrotic areas with a scar-like appearance, atrophy of tongue papillae, gingival recession and alveolar bone resorption. We report a case of a 13-year-old girl who consulted for progressive recession on the attached gingiva of her upper left incisors. She also presented a hypopigmented line on the left side skin of her upper lip, which continued through the vermilion and the lip mucosa, including the gingiva of the affected teeth. Clinical examination, blood tests, computerized axial tomography, echo-Doppler ultrasound and histopathological evaluation confirmed the diagnosis of morphea. Treatment with methotrexate and systemic corticosteroids was conducted. After 24 months, no other lesions appeared. No adverse side effects have been reported so far. Key words: Localized scleroderma, oral morphea, linear scleroderma, oral involvement, intraoral lesions.

European college of orthodontics: commission of affiliation and titularisation.

PubMed

Muller, Christine

2012-06-01

Date of birth: 28/4/1977; sex: female. A. (4/2006; 29 years). Tooth-arch discrepancy with bi-maxillary protrusion. Correction of bi-maxillary protrusion; avulsion of 15, 25, 35 and 45; fixed multi-bracket Incognito bi-maxillary appliance; mini-screw anchorage. B. POST-TREATMENT RECORDS DOCUMENTS: (9/2009; 32 years and 6 months). Permanent retainers using fixed upper and lower bonded wires. C. POST-RETENTION RECORDS: (7/2010; 33 years and 3 months). D. Reason for consultation: correction of crooked and "jutting" teeth. Extraoral examination: balanced facial levels; lateral view: predominant lower third; closed nasolabial angle; labial asymmetry with predominant lower lips. Endooral examination: young adult dentition; average dental status; large number of fillings; panorex confirms four devitalized teeth; good periodontal status; V-shaped upper arch with lingually ectopic 12 and 22; lower arch with slight incisor crowding; bi-lateral molar and canine Class I; crossbite of 12 and 22; 2-mm deepbite and 1-mm overjet. Copyright © 2012. Published by Elsevier Masson SAS.

New remains of the enigmatic cetartiodactyl Bugtitherium grandincisivum Pilgrim, 1908, from the upper Oligocene of the Bugti Hills (Balochistan, Pakistan).

PubMed

Métais, Grégoire; Antoine, Pierre-Olivier; Baqri, Syed Rafiqul Hassan; Benammi, Mouloud; Crochet, Jean-Yves; de Franceschi, Dario; Marivaux, Laurent; Welcomme, Jean-Loup

2006-07-01

Newly discovered fossil material of the enigmatic cetartiodactyl Bugtitherium grandincisivum from the upper Oligocene of the Bugti Member of the Chitarwata Formation in the Bugti Hills (Balochistan, Pakistan) is reported. These new specimens consist of two fragmentary muzzles (one preserving the first incisors and belonging to a juvenile) and a fragmentary right mandible with m3. The morphologies of the anterior dentition and m3 provided by these new specimens confirm the validity of the genus Bugtitherium and advocate probable anthracotheriid affinity for the genus rather than entelodontid or suoid affinities, but do not definitively close the debate about Bugtitherium's familial affinities within Cetartiodactyla. Although still poorly documented, this large-sized anthracotheriid-like cetartiodactyl is a possible key form for understanding the early evolution of hippos, and, in turn, the ancestry of whales, because of both its morphological similarities with hippos and primitive Paleogene whales and its Tethysian distribution.

New remains of the enigmatic cetartiodactyl Bugtitherium grandincisivum Pilgrim, 1908, from the upper Oligocene of the Bugti Hills (Balochistan, Pakistan)

NASA Astrophysics Data System (ADS)

Métais, Grégoire; Antoine, Pierre-Olivier; Baqri, Syed Rafiqul Hassan; Benammi, Mouloud; Crochet, Jean-Yves; de Franceschi, Dario; Marivaux, Laurent; Welcomme, Jean-Loup

2006-07-01

Newly discovered fossil material of the enigmatic cetartiodactyl Bugtitherium grandincisivum from the upper Oligocene of the Bugti Member of the Chitarwata Formation in the Bugti Hills (Balochistan, Pakistan) is reported. These new specimens consist of two fragmentary muzzles (one preserving the first incisors and belonging to a juvenile) and a fragmentary right mandible with m3. The morphologies of the anterior dentition and m3 provided by these new specimens confirm the validity of the genus Bugtitherium and advocate probable anthracotheriid affinity for the genus rather than entelodontid or suoid affinities, but do not definitively close the debate about Bugtitherium’s familial affinities within Cetartiodactyla. Although still poorly documented, this large-sized anthracotheriid-like cetartiodactyl is a possible key form for understanding the early evolution of hippos, and, in turn, the ancestry of whales, because of both its morphological similarities with hippos and primitive Paleogene whales and its Tethysian distribution.

Molar-incisor-hypomineralisation (MIH). Retrospective clinical study in Greek children. I. Prevalence and defect characteristics.

PubMed

Lygidakis, N A; Dimou, G; Briseniou, E

2008-12-01

This was to evaluate the prevalence and the clinical characteristics of MIH in a group of Greek children. During the years 2003--2005, all MIH cases diagnosed according to the recently set criteria were selected from the new patients clinic of a Community Dental Centre for Children (Athens). Age, gender and teeth involved were recorded. The severity of MIH was determined collectively by dividing the affected teeth in two groups; a) mild defect (demarcated opacities) and b) moderate/severe defect (enamel breakdown and atypical restorations). Evaluation of the distribution of the affected teeth within MIH cases was performed in a separate group of 225 affected children aged 8-12 years with their entire 12 'index' teeth erupted. From the 3,518, 5.5 to 12 year old children that were examined, there were 360 (10.2%) children with MIH, 211 (58.6%) females and 149 (41.4%) males, with 1,926 affected teeth, 1,231 molars and 695 incisors. In the molars group, maxillary molars were more frequently affected (87.8/90.3%) than mandibular (81.7/82.2%). In the central incisor group, maxillary teeth were also more frequently affected (50/55%) than mandibular (24.4/25%), while laterals were the least affected. In all there were 37.9% molars with moderate/severe defects as compared with 4.9% incisors, the remaining 62.1% and 95.1% respectively being mild. The various associations between the affected teeth were evaluated in the sub-group of 225 MIH children with all 'index' teeth erupted (1,286 affected teeth, 776 molars and 510 incisors), with mean number of affected teeth per child being 5.7; separately for molars 3.4 and for incisors 2.2. In these cases 28.4% of the children had only molars affected and 71.6% had both molars and incisors. In descending order the associations of affected teeth more frequently found were: 4 molars/2 incisors (23.5%), 4 molars/4 incisors (16.8%), 4 molars alone (15.1%) and 2 molars alone (9.7%), the remaining being much less. As age increased the clinical severity of the affected teeth became more prevalent (p=0.0001), and when the total number of affected teeth was assessed the likelihood of having severe defect was also increased (p=0.001). The prevalence of the defect in the present study was 10.2% with maxillary teeth being more frequently affected. Severity increased with age. Mild defects were much more frequent, particularly in incisors. The total number of teeth affected and the most frequently found associations were, 4 molars/2 incisors, 4 molars/4 incisors, 4 molars alone and 2 molars alone.

A simple and novel grading method for retraction and overshoot in Duane retraction syndrome.

PubMed

Kekunnaya, Ramesh; Moharana, Ruby; Tibrewal, Shailja; Chhablani, Preeti-Patil; Sachdeva, Virender

2016-11-01

Strabismus in Duane retraction syndrome is frequently associated with significant globe retraction and overshoots. However, there is no method to objectively grade retraction and overshoot. Our purpose is to describe a novel objective grading method. This novel and simple grading method has excellent agreement. It will help standardise measurements and guide the clinician in taking the decision for surgery and predicting its outcome. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Retractions by Pakistan Journal of Medical Sciences due to Scientific Misconduct.

PubMed

Jawaid, Shaukat Ali; Jawaid, Masood

2016-08-01

Under pressure to publish, academicians and research scientists are increasingly indulging in scientific misconduct leading to retraction of such papers when identified. Other reasons of retraction include scientific error and problems related to ethics. Four published manuscripts (three from Turkey and one from Pakistan) had to be retracted from Pakistan Journal of Medical Sciences from January 2014 to July 2015 due to scientific misconduct. There is a need to search for effective measures which could help reduce the number of retractions and prevent scientific literature from being further polluted, which seems to be increasing every year.

Comparative techniques of medial rectus muscle retraction for endoscopic exposure of the medial intraconal space.

PubMed

Lin, Giant C; Freitag, Suzanne K; Kocharyan, Armine; Yoon, Michael K; Lefebvre, Daniel R; Bleier, Benjamin S

2016-05-01

The medial rectus muscle (MRM) is the medial boundary to the intraconal space of the orbit, and retraction of the MRM is oftentimes necessary for endoscopic removal of intraconal tumors, e.g., orbital hemangioma. We evaluated each of the reported methods of MRM retraction for endoscopic orbital surgery and quantified the degree of intraconal exposure conferred by each method. Eight orbits from four cadaver heads were dissected. In each orbit, medial orbital decompression was performed and the MRM was retracted by using four previously described techniques: (1) external MRM retraction at the globe insertion point by using vessel loop (external group), (2) transseptal MRM retraction by using vessel loop (transseptal group), (3) transchoanal retraction of the MRM by using vessel loop (choanal group), and (4) transseptal four-handed technique by using double ball retraction by a second surgeon (transseptal double ball group). The length, height, and area of exposure of the medial intraconal space were quantified and compared. The average ± standard deviation (SD) anterior-posterior exposures for the external group, transseptal group, and transseptal double ball group were 17.51 ± 3.39 mm, 16.59 ± 4.16 mm, and 18.0 ± 15.25 mm, respectively. The choanal group provided significantly less exposure (12.39 ± 3.44 mm, p = 0.049) than the other groups. The average ± SD vertical exposures for the transseptal group, choanal group, and transseptal double ball group were 12.53 ± 4.38 mm, 13.05 ± 5.86 mm, and 13.57 ± 3.74 mm, respectively. The external group provided significantly less exposure (4.51 ± 1.56 mm, p = 0.0072) than the other groups. The transseptal and transseptal double ball groups provided the greatest total access by surface area (58.88 ± 26.96 mm(2) and 62.94 ± 34.74 mm(2), respectively) compared with the external and choanal groups (34.82 ± 23.37 mm(2) and 43.10 ± 23.68 mm(2), respectively). Although the transseptal trajectory of MRM retraction was optimal, the difference in total area of exposure between the static vessel loop retraction and the dynamic, four-handed technique with double ball instrument retraction was not significant. Of note, the exposure provided by the choanal technique required the surgeon to work both above and below the muscle. Retraction of the MRM toward the choanae provided the least length of exposure, and external retraction exposed the least height and total area. Transseptal MRM retraction was most favorable and provided the largest endoscopic corridor to the medial intraconal space. A four-handed approach for endoscopic intraconal surgery of the orbit may offer advantages in dynamic adjustments in retraction.

Orthodontic Management of Congenitally Missing Maxillary Lateral Incisors: A Case Report

PubMed Central

Rongo, Roberto; Cupo, Antonello; Valletta, Rosa

2014-01-01

This case report describes the orthodontic treatment of a woman, aged 15 years, with permanent dentition, brachyfacial typology, with congenitally missing maxillary lateral incisors. Multibracket straightwire fixed appliance was used to open the space for dental implant placement, and treat the impaired occlusion. The missing lateral incisors were substituted with oral implants. PMID:24711929

Duane retraction syndrome type 1 with Usher syndrome type 2: an unreported association.

PubMed

Khurana, Bhawna Piplani; Khurana, Aruj Kumar; Grover, Sumit

2015-05-07

Duane retraction syndrome is characterized by globe retraction and palpebral fissure narrowing on adduction, with restriction of abduction, adduction, or both. Usher syndrome type 2 consists of congenital bilateral sensorineural hearing loss and retinitis pigmentosa. The authors present a case with a yet unreported association between Duane retraction syndrome type 1 and Usher syndrome type 2. Copyright 2015, SLACK Incorporated.

76 FR 472 - Harmonization of Airworthiness Standards for Transport Category Airplanes-Landing Gear Retracting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-05

... design takeoff weight), occurring during retraction and extension at any airspeed up to 1.5 V SR1 with...) currently uses a peripheral speed equal to 1.3 V S during retraction and extension at any airspeed up to 1.6... design takeoff weight), occurring during retraction and extension at any airspeed up to 1.5 V SR1 (with...

Disulfide bond exchanges in integrins αIIbβ3 and αvβ3 are required for activation and post-ligation signaling during clot retraction.

PubMed

Mor-Cohen, Ronit; Rosenberg, Nurit; Averbukh, Yulia; Seligsohn, Uri; Lahav, Judith

2014-05-01

Integrin αIIbβ3 mediates platelet adhesion, aggregation and fibrin clot retraction. These processes require activation of αIIbβ3 and post-ligation signaling. Disulfide bond exchanges are involved in αIIbβ3 and αvβ3 activation. In order to investigate the role of integrin activation and disulfide bond exchange during αIIbβ3- and αvβ3-mediated clot retraction, we co-expressed in baby hamster kidney cells wild-type (WT) human αIIb and WT or mutated human β3 that contain single or double cysteine substitutions disrupting C523-C544 or C560-C583 bonds. Flow cytometry was used to measure surface expression and activation state of the integrins. Time-course of fibrin clot retraction was examined. Cells expressed WT or mutated human αIIbβ3 as well as chimeric hamster/human αvβ3. The αIIbβ3 mutants were constitutively active and the thiol blocker dithiobisnitrobenzoic acid (DTNB) did not affect their activation state. WT cells retracted the clot and addition of αvβ3 inhibitors decreased the retraction rate. The active mutants and WT cells activated by anti-LIBS6 antibody retracted the clot faster than untreated WT cells, particularly in the presence of αvβ3 inhibitor. DTNB substantially inhibited clot retraction by WT or double C523S/C544S mutant expressing cells, but minimally affected single C523S, C544S or C560S mutants. Anti-LIBS6-enhanced clot retraction was significantly inhibited by DTNB when added prior to anti-LIBS6. Both αIIbβ3 and αvβ3 contribute to clot retraction without prior activation of the integrins. Activation of αIIbβ3, but not of αvβ3 enhances clot retraction. Both αIIbβ3 activation and post-ligation signaling during clot retraction require disulfide bond exchange. Copyright © 2014 Elsevier Ltd. All rights reserved.

Anterior open bite treated with myofunctional therapy and palatal crib.

PubMed

Asiry, Moshabab A

2015-03-01

This case report demonstrates the treatment effects of palatal crib combined with the myofunctional therapy in a child with anterior open bite (AOB) due to thumb sucking and habitual anterior and low tongue position. The patient, an 11-year-old boy, had an anterior open bite and flared and spaced upper and lower incisors. Palatal cribs in conjunction with myofunctional therapy were used to discourage sucking habit and to adapt normal tongue position. Successful correction of the AOB with adequate overjet and overbite were achieved with total treatment time of 7 months. The importance of myofunctional therapy in adopting normal tongue position and in maintaining the stability of open bite correction is emphasized.

Surgical-orthodontic treatment of Class I malocclusion with maxillary vertical excess--a case report.

PubMed

Kiran, Jyothi; Isaac, Anish; Shanthraj, Ravis; Madannagowda, Shivalinga

2012-01-01

This article describes the treatment of an adult male with vertical maxillary excess, excessive gingival display on smiling, a convex profile, proclined upper and lower incisors, and crowded lower anteriors with severe lip incompetence. The therapy included stages: (1) Pre surgical orthodontics- leveling and aligning of the maxillary and mandibular arch with closure of all extraction spaces. (2) Surgical phase-Lefort I osteotomy for superior maxillary impaction, 5 mm of anterior and 3 mm of posterior impaction ofmaxilla was done. (3) Post surgical orthodontics for finishing and detailing. The treatment lasted 16 months; improved facial esthetics significantly; and resulted in a normal occlusion, overjet, and overbite.

Esthetic Rehabilitation of Anterior Teeth with Laminates Composite Veneers

PubMed Central

Riva, Giancarlo

2014-01-01

No- or minimal-preparation veneers associated with enamel preservation offer predictable results in esthetic dentistry; indirect additive anterior composite restorations represent a quick, minimally invasive, inexpensive, and repairable option for a smile enhancement treatment plan. Current laboratory techniques associated with a strict clinical protocol satisfy patients' restorative and esthetic needs. The case report presented describes minimal invasive treatment of four upper incisors with laminate nanohybrid resin composite veneers. A step-by-step protocol is proposed for diagnostic evaluation, mock-up fabrication and trial, teeth preparation and impression, and adhesive cementation. The resolution of initial esthetic issues, patient satisfaction, and nice integration of indirect restorations confirmed the success of this anterior dentition rehabilitation. PMID:25013730

[Veneer computer aided design based on reverse engineering technology].

PubMed

Liu, Ming-li; Chen, Xiao-dong; Wang, Yong

2012-03-01

To explore the computer aided design (CAD) method of veneer restoration, and to assess if the solution can help prosthesis meet morphology esthetics standard. A volunteer's upper right central incisor needed to be restored with veneer. Super hard stone models of patient's dentition (before and after tooth preparation) were scanned with the three-dimensional laser scanner. The veneer margin was designed as butt-to-butt type. The veneer was constructed using reverse engineering (RE) software. The technique guideline of veneers CAD was explore based on RE software, and the veneers was smooth, continuous and symmetrical, which met esthetics construction needs. It was a feasible method to reconstruct veneer restoration based on RE technology.

Do different vertical positions of maxillary central incisors influence smile esthetics perception?

PubMed Central

Menezes, Erica Bretas Cabral; Bittencourt, Marcos Alan Vieira; Machado, Andre Wilson

2017-01-01

ABSTRACT INTRODUCTION: The purpose of this study was to determine the perception of smile esthetics among orthodontists and layperson, with respect to different maxillary central incisors vertical positions in full-face and close-up smile analyses. METHODS: Frontal photographs of the smiles of two adult women were used. Images were altered to create a symmetrical image with the gingival margin levels of the maxillary canines matching the central incisors and a 1.0-mm central-to-lateral incisal step. Later, the images were altered in order to create six different central incisor vertical positions in 0.5-mm increments. The images were randomly assembled in an album, which was given to 114 judges, 57 orthodontists and 57 laypersons, who were asked to evaluate the attractiveness of the images using the visual analog scale. The data collected were statistically analyzed by means of 1-way analysis of variance with the Tukey post-hoc test and the Student t test. RESULTS: The highest rated smiles showed two notable characteristics: a) the central incisor gingival margins matched or were 0.5 mm below the line of the canine gingival margins and; b) the central-to-lateral incisal step was 1.0 to 1.5 mm. The worst smiles showed two notable characteristics: a) the central incisor gingival margins were 1.0 mm above or 1.5 mm below the canine gingival margins and; b) no step between the centrals and laterals or a 2.5-mm step. CONCLUSION: The vertical position of the maxillary central incisors significantly affected the perception of the smile esthetics, whereas slightly extruded central incisors were more esthetically preferred than intruded. PMID:28658361

Esthetic evaluation of incisor inclination in smiling profiles with respect to mandibular position.

PubMed

Zarif Najafi, Hooman; Oshagh, Morteza; Khalili, Mohammad Hassan; Torkan, Sepideh

2015-09-01

The smile is a key facial expression, and a careful assessment of the facial profile in smiling is an essential part of a complete orthodontic diagnosis. The aim of this study was to determine the preferred maxillary incisor inclination in the smile profile with regard to different mandibular positions. A smiling profile photograph of a man with normal facial profile features was altered digitally to obtain 3 different mandibular sagittal positions in 4-mm decrements or increments from -4 to +4 mm. In each mandibular position, the inclination of the maxillary incisors was changed from -10° to +10° in 5° increments. A total of 234 raters (72 senior dental students, 24 orthodontists, 21 maxillofacial surgeons, 25 prosthodontists, and 92 laypeople) were asked to score each photograph using a Likert-type rating scale. Mann-Whitney, Kruskal-Wallis, and intraclass correlation coefficient tests were used to analyze the data. In retruded and protruded mandibles, normal incisor inclination and the most retroclined incisors were selected as the most and the least attractive images, respectively, by almost all groups. With an orthognathic mandible, the image with the most retroclined incisors was selected as the least attractive, but the raters were not unanimous regarding the most attractive image. The intraclass correlation coefficient was 0.82 (high level of agreement). Also, the sex of the raters had no effect on the rating of the photographs. It is crucial to establish a normal incisor inclination, especially in patients with a mandibular deficiency or excess. An excessive maxillary incisor lingual inclination should be avoided regardless of the mandibular position. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Epitympanum volume and tympanic isthmus area in temporal bones with retraction pockets.

PubMed

Monsanto, Rafael da Costa; Pauna, Henrique Furlan; Kaya, Serdar; Hızlı, Ömer; Kwon, Geeyoun; Paparella, Michael M; Cureoglu, Sebahattin

2016-11-01

To compare the volume of the epitympanic space, as well as the area of the tympanic isthmus, in human temporal bones with retraction pockets to those with chronic otitis media without retraction pockets and to those with neither condition. Comparative human temporal bone study. We generated a three-dimensional model of the bony epitympanum and measured the epitympanic space. We also compared the area of the tympanic isthmus. The mean total volume of the epitympanum was 40.55 ± 7.14 mm 3 in the retraction pocket group, 50.03 ± 8.49 mm 3 in the chronic otitis media group, and 48.03 ± 9.16 mm 3 in the neither condition group. The mean volume of the anterior, lateral, and medial compartments in temporal bones in the retraction pocket group was significantly smaller than in the two control groups (P < 0.05). Total epitympanic volume was also significantly smaller in the retraction pocket group than in both control groups (P < 0.05). The mean area of the tympanic isthmus was significantly smaller in the retraction pocket group (8.11 ± 2.44 mm 2 ) than in the chronic otitis media group (9.82 ± 2.06 mm 2 ) or the neither condition group (10.66 ± 1.78 mm 2 ) (P < 0.05). Our data indicate that temporal bones with retraction pockets have a smaller volume bony epitympanum and a smaller tympanic isthmus area as compared with temporal bones from both control groups. The smaller volume tympanic isthmus in the retraction pocket group may suggest that a blockage in the aeration pathways to the epitympanum could create dysventilation, resulting in negative pressure and ultimately in retraction pockets and cholesteatomas. NA Laryngoscope, 126:E369-E374, 2016. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Orthodontically induced eruption of a horizontally impacted maxillary central incisor.

PubMed

Rizzatto, Susana Maria Deon; de Menezes, Luciane Macedo; Allgayer, Susiane; Batista, Eraldo Luiz; Freitas, Maria Perpétua Mota; Loro, Raphael Carlos Drumond

2013-07-01

This case report presents the clinical features and periodontal findings in a patient with a horizontally impacted maxillary central incisor that had been exposed and aligned after a closed-eruption surgical technique. By combining 3 treatment stages-maxillary expansion, crown exposure surgery, and induced eruption-the horizontally impacted incisor was successfully moved into proper position. The patient finished treatment with a normal and stable occlusion between the maxillary and mandibular arches, and an adequate width of attached gingiva, even in the area surrounding the crown. The 5-year follow-up of stability and periodontal health demonstrated esthetic and functional outcomes after orthodontically induced tooth eruption. Clinical evaluation showed that the treated central incisor had periodontal clinical variables related to visible plaque, bleeding on probing, width of attached gingiva, and crown length that resembled the contralateral incisor. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Tooth shape preferences in an esthetic smile.

PubMed

Anderson, Kurt M; Behrents, Rolf G; McKinney, Thomas; Buschang, Peter H

2005-10-01

The purpose of this study was to evaluate the contributions of tooth shape to the esthetic smile. Restorative dentists (120), laypeople (102), and orthodontists (113) evaluated a series of color photographs of men's and women's smiles. The photographs were randomly presented to test the effects of 3 different shapes of maxillary incisors and canines on the same patient. For women, orthodontists preferred round and square-round incisors (P < .01), and restorative dentists preferred round incisors (P < or = .03). Laypeople did not discriminate between incisor shapes. For men, all 3 groups preferred square-round incisors (P < or = .042). There was also a tendency for male judges to rate female images more attractive than did female judges. Restorative dentists, orthodontists, and laypeople share similarities and display differences when considering esthetic preferences in tooth shape. Although there was no consensus in preference among the laypeople as a group, their preferences differed from those of the dental professionals.

Does infantile abduction deficit indicate duane retraction syndrome until disproven?

PubMed

Kim, Jae Hyoung; Hwang, Jeong-Min

2014-11-01

Duane retraction syndrome consists of abduction deficit and palpebral fissure narrowing, upshoots, or downshoots on adduction. Infants with abduction deficit should be considered to have Duane retraction syndrome until disproven, because congenital abducens nerve palsy is extremely rare. The abducens nerve on the affected side is absent in type 1 Duane retraction syndrome and in some type 3 patients. The authors present a 7-month-old girl who showed limitation of abduction simulating Duane retraction syndrome. High-resolution magnetic resonance imaging (MRI) revealed atrophic lateral rectus and present abducens nerve. This report is important because this case showed that congenital abducens nerve palsy exists, although it is extremely rare, and high-resolution MRI could be pivotal for the differentiation of Duane retraction syndrome and congenital abducens nerve palsy in infancy. © The Author(s) 2014.

AORN Ergonomic Tool 5: Tissue Retraction in the Perioperative Setting.

PubMed

Spera, Patrice; Lloyd, John D; Hernandez, Edward; Hughes, Nancy; Petersen, Carol; Nelson, Audrey; Spratt, Deborah G

2011-07-01

Manual retraction, a task performed to expose the surgical site, poses a high risk for musculoskeletal disorders that affect the hands, arms, shoulders, neck, and back. In recent years, minimally invasive and laparoscopic procedures have led to the development of multifunctional instruments and retractors capable of performing these functions that, in many cases, has eliminated the need for manual retraction. During surgical procedures that are not performed endoscopically, the use of self-retaining retractors enables the assistant to handle tissue and use exposure techniques that do not require prolonged manual retraction. Ergonomic Tool #5: Tissue Retraction in the Perioperative Setting provides an algorithm for perioperative care providers to determine when and under what circumstances manual retraction of tissue is safe and when the use of a self-retaining retractor should be considered. Published by Elsevier Inc.

A framework for correcting brain retraction based on an eXtended Finite Element Method using a laser range scanner.

PubMed

Li, Ping; Wang, Weiwei; Song, Zhijian; An, Yong; Zhang, Chenxi

2014-07-01

Brain retraction causes great distortion that limits the accuracy of an image-guided neurosurgery system that uses preoperative images. Therefore, brain retraction correction is an important intraoperative clinical application. We used a linear elastic biomechanical model, which deforms based on the eXtended Finite Element Method (XFEM) within a framework for brain retraction correction. In particular, a laser range scanner was introduced to obtain a surface point cloud of the exposed surgical field including retractors inserted into the brain. A brain retraction surface tracking algorithm converted these point clouds into boundary conditions applied to XFEM modeling that drive brain deformation. To test the framework, we performed a brain phantom experiment involving the retraction of tissue. Pairs of the modified Hausdorff distance between Canny edges extracted from model-updated images, pre-retraction, and post-retraction CT images were compared to evaluate the morphological alignment of our framework. Furthermore, the measured displacements of beads embedded in the brain phantom and the predicted ones were compared to evaluate numerical performance. The modified Hausdorff distance of 19 pairs of images decreased from 1.10 to 0.76 mm. The forecast error of 23 stainless steel beads in the phantom was between 0 and 1.73 mm (mean 1.19 mm). The correction accuracy varied between 52.8 and 100 % (mean 81.4 %). The results demonstrate that the brain retraction compensation can be incorporated intraoperatively into the model-updating process in image-guided neurosurgery systems.

Minimizing Retraction by Pia-Arachnoidal 10-0 Sutures in Intrasulcal Dissection.

PubMed

Uluc, Kutluay; Cikla, Ulas; Morkan, Deniz B; Sirin, Alperen; Ahmed, Azam S; Swanson, Kyle; Baskaya, Mustafa K

2018-07-01

In contemporary microneurosurgery reducing retraction-induced injury to the brain is essential. Self-retaining retractor systems are commonly used to improve visualization and decrease the repetitive microtrauma, but sometimes self-retaining retractor systems can be cumbersome and the force applied can cause focal ischemia or contusions. This may increase the morbidity and mortality. Here, we describe a technique of retraction using 10-0 sutures in the arachnoid. To evaluate the imaging and clinical results in patients where 10-0 suture retraction was used to aid the surgical procedure. Adjacent cortex was retracted by placing 10-0 nylon suture in the arachnoid of the bank or banks of the sulcus. The suture was secured to the adjacent dural edge by using aneurysm clips, allowing for easy adjustability of the amount of retraction. We retrospectively analyzed the neurological outcome, signal changes in postoperative imaging, and ease of performing surgery in 31 patients with various intracranial lesions including intracranial aneurysms, intra- and extra-axial tumors, and cerebral ischemia requiring arterial bypass. Clinically, there were no injuries, vascular events, or neurological deficits referable to the relevant cortex. Postoperative imaging did not show changes consistent with ischemia or contusion due to the retraction. This technique improved the visualization and illumination of the surgical field in all cases. Retraction of the arachnoid can be used safely in cases where trans-sulcal dissection is required. This technique may improve initial visualization and decrease the need for dynamic or static retraction.

Orexin A Inhibits Propofol-Induced Neurite Retraction by a Phospholipase D/Protein Kinase Cε-Dependent Mechanism in Neurons

PubMed Central

Björnström, Karin; Turina, Dean; Strid, Tobias; Sundqvist, Tommy; Eintrei, Christina

2014-01-01

Background The intravenous anaesthetic propofol retracts neurites and reverses the transport of vesicles in rat cortical neurons. Orexin A (OA) is an endogenous neuropeptide regulating wakefulness and may counterbalance anaesthesia. We aim to investigate if OA interacts with anaesthetics by inhibition of the propofol-induced neurite retraction. Methods In primary cortical cell cultures from newborn rats’ brains, live cell light microscopy was used to measure neurite retraction after propofol (2 µM) treatment with or without OA (10 nM) application. The intracellular signalling involved was tested using a protein kinase C (PKC) activator [phorbol 12-myristate 13-acetate (PMA)] and inhibitors of Rho-kinase (HA-1077), phospholipase D (PLD) [5-fluoro-2-indolyl des-chlorohalopemide (FIPI)], PKC (staurosporine), and a PKCε translocation inhibitor peptide. Changes in PKCε Ser729 phosphorylation were detected with Western blot. Results The neurite retraction induced by propofol is blocked by Rho-kinase and PMA. OA blocks neurite retraction induced by propofol, and this inhibitory effect could be prevented by FIPI, staurosporine and PKCε translocation inhibitor peptide. OA increases via PLD and propofol decreases PKCε Ser729 phosphorylation, a crucial step in the activation of PKCε. Conclusions Rho-kinase is essential for propofol-induced neurite retraction in cortical neuronal cells. Activation of PKC inhibits neurite retraction caused by propofol. OA blocks propofol-induced neurite retraction by a PLD/PKCε-mediated pathway, and PKCε maybe the key enzyme where the wakefulness and anaesthesia signal pathways converge. PMID:24828410

Data regarding articles retracted from PubMed indexed dental journals from India.

PubMed

Shamim, Thorakkal

2018-06-01

This data aimed to audit the articles retracted from PubMed indexed dental journals from India. The PubMed indexed journals considered are Indian Journal of Dental research, Journal of Indian Society of Periodontology, Contemporary Clinical Dentistry, Journal of Indian Society of Pedodontics and Preventive Dentistry, Journal of Oral and Maxillofacial Pathology and Journal of Indian Prosthodontic Society for type of article, name of dental specialty, topic of individual dental specialties, causes for retraction of article and authorship trend of retracted articles using web-based search. Among PubMed indexed Indian dental journals,the number of retracted articles were as follows: Indian Journal of Dental research (4) followed by Journal of Indian Society of Periodontology (3), Contemporary Clinical Dentistry (3), Journal of Indian Society of Pedodontics and Preventive Dentistry (2), Journal of Oral and Maxillofacial Pathology (2) and Journal of Indian Prosthodontic Society (1). Out of 15 retracted articles from PubMed indexed Indian dental journals, case reports (7) form a major share followed by original articles(6) and review articles (2). Among the dental specialties of retracted articles, oral pathology and microbiology (5) constitute the major share followed by periodontics (4), pedodontics (4), oral medicine and radiology (1) and prosthodontics (1). Duplicate publication (7), plagiarism (5) and authorship dispute (3) are the causes for the retraction of article.

Cellular mechanics of germ band retraction in Drosophila.

PubMed

Lynch, Holley E; Crews, Sarah M; Rosenthal, Brett; Kim, Elliott; Gish, Robert; Echiverri, Karl; Hutson, M Shane

2013-12-15

Germ band retraction involves a dramatic rearrangement of the tissues on the surface of the Drosophila embryo. As germ band retraction commences, one tissue, the germ band, wraps around another, the amnioserosa. Through retraction the two tissues move cohesively as the highly elongated cells of the amnioserosa contract and the germ band moves so it is only on one side of the embryo. To understand the mechanical drivers of this process, we designed a series of laser ablations that suggest a mechanical role for the amnioserosa. First, we find that during mid retraction, segments in the curve of the germ band are under anisotropic tension. The largest tensions are in the direction in which the amnioserosa contracts. Second, ablating one lateral flank of the amnioserosa reduces the observed force anisotropy and leads to retraction failures. The other intact flank of amnioserosa is insufficient to drive retraction, but can support some germ band cell elongation and is thus not a full phenocopy of ush mutants. Another ablation-induced failure in retraction can phenocopy mys mutants, and does so by targeting amnioserosa cells in the same region where the mutant fails to adhere to the germ band. We conclude that the amnioserosa must play a key, but assistive, mechanical role that aids uncurling of the germ band. © 2013 Elsevier Inc. All rights reserved.

Cellular Mechanics of Germ Band Retraction in Drosophila

PubMed Central

Lynch, Holley E.; Crews, Sarah M.; Rosenthal, Brett; Kim, Elliott; Gish, Robert; Echiverri, Karl; Hutson, M. Shane

2013-01-01

Germ band retraction involves a dramatic rearrangement of the tissues on the surface of the Drosophila embryo. As germ band retraction commences, one tissue, the germ band, wraps around another, the amnioserosa. Through retraction the two tissues move cohesively as the highly elongated cells of the amnioserosa contract and the germ band moves so it is only on one side of the embryo. To understand the mechanical drivers of this process, we designed a series of laser ablations that suggest a mechanical role for the amnioserosa. First, we find that during mid retraction, segments in the curve of the germ band are under anisotropic tension. The largest tensions are in the direction in which the amnioserosa contracts. Second, ablating one lateral flank of the amnioserosa reduces the observed force anisotropy and leads to retraction failures. The other intact flank of amnioserosa is insufficient to drive retraction, but can support some germ band cell elongation and is thus not a full phenocopy of ush mutants. Another ablation-induced failure in retraction can phenocopy mys mutants, and does so by targeting amnioserosa cells in the same region where the mutant fails to adhere to the germ band. We conclude that the amnioserosa must play a key, but assistive, mechanical role that aids uncurling of the germ band. PMID:24135149

Mandibular Symmetrical Bilateral Canine-Lateral Incisors Transposition: Its Early Diagnosis and Treatment Considerations.

PubMed

Shapira, Yehoshua; Finkelstein, Tamar; Kadry, Rana; Schonberger, Shirley; Shpack, Nir

2016-01-01

Bilateral mandibular tooth transposition is a relatively rare dental anomaly caused by distal migration of the mandibular lateral incisors and can be detected in the early mixed dentition by radiographic examination. Early diagnosis and interceptive intervention may reduce the risk of possible transposition between the mandibular canine and lateral incisor. This report illustrates the orthodontic management of bilateral mandibular canine-lateral incisor transposition. Correct positioning of the affected teeth was achieved on the left side while teeth on the right side were aligned in their transposed position. It demonstrates the outcome of good alignment of the teeth in the dental arch.

Dental abnormalities in a mouse model for craniometaphyseal dysplasia.

PubMed

Dutra, E H; Chen, I-P; Reichenberger, E J

2013-02-01

Mice carrying a knock-in mutation (Phe377del) in the Ank gene replicate many skeletal characteristics of human craniometaphyseal dysplasia, including hyperostotic mandibles. Ank (KI/KI) mice have normal morphology of erupted molars and incisors but excessive cementum deposition with increased numbers of Ibsp- and Dmp1-positive cells on root surfaces. The cervical loops of adult Ank (KI/KI) lower incisors are at the level of the third molars, while they are close to the mandibular foramen in Ank (+/+) mice. Furthermore, Ank (KI/KI) incisors show decreased eruption rates, decreased proliferation of odontoblast precursors, and increased cell apoptosis in the stellate reticulum. However, their capability for continuous elongation is not compromised. Quantification of TRAP-positive cells in the apical ends of Ank (KI/KI) incisors revealed decreased osteoclast numbers and osteoclast surfaces. Bisphosphonate injections in Ank (+/+) mice replicate the Ank (KI/KI) incisor phenotype. These results and a comparison with the dental phenotype of Ank loss-of-function mouse models suggest that increased cementum thickness may be caused by decreased extracellular PPi levels and that the incisor phenotype is likely due to hyperostosis of mandibles, which distinguishes Ank (KI/KI) mice from the other Ank mouse models.

Incisor microwear and diet in three species of Colobus.

PubMed

Kelley, J

1990-01-01

Examination of incisor microwear in three species of Colobus revealed that the predominantly folivorous C. badius more closely resembles C. satanas, a seed predator/folivore, than C. guereza, another predominantly folivorous species. This demonstrates that species of the same broad dietary category can have very different patterns of incisor microwear, indicative of differences in food procurement behavior and/or the physical properties of dietary items for some portion of the diet. Conversely, species of different categories can have microwear patterns that, superficially at least, are quite similar. The dissimilarity in incisor microwear between C. badius and C. guereza is mirrored to a certain extent in molar microwear, although the differences are not nearly so great on the molars. The differences between C. badius and C. guereza may involve different food items in the major, folivorous portions of their diets, or they may relate to differences in the very minor fruit and bark components. The similar microwear patterns of C. badius and C. satanas demonstrate that incisor microwear by itself is unreliable for assigning fossil species to broad dietary categories. Incisor microwear can be used to infer finer dietary distinctions in fossil species for which dietary category has been determined by other means.

Lingual eruption of mandibular permanent incisors: a space correlated phenomenon?

PubMed

Aminabadi, Naser Asl; Farahani, Ramin Mostofi Zadeh; Sohrabi, Aydin; Pouralibaba, Firuz

2009-01-01

The aim of the present study was to investigate the prevalence and distribution according to various arch length conditions of lingually erupted mandibular permanent incisors and the effect of space condition on this phenomenon with long-term follow-up of these teeth. A total of 105 children aged 5-7.5 years with one or more permanent mandibular incisors erupting lingual to the corresponding primary incisors were included in the study. A space analysis was performed. The subjects were divided into six groups according to various space conditions. The subjects were followed for 2 years. In this study the prevalence of lingual eruption was 18.4%. Eighty-three point seven percent of the subjects had either equivalent space, mild space excess, or a space deficiency (not more than 3 mm). No relationship was found between groups and clinical outcomes (P>.05). Follow up of the main three groups (according to the space analysis results) revealed in the adequate space group 75% of the children lost their primary incisors without any intervention. Similar outcomes occurred in 85.7% and 57.14% of cases in the mild space excess and space deficiency groups, respectively. Considering the three main groups combined, equivalent space, mild space excess, and mild space deficiency, 70.45% of children lost their primary incisors without any intervention and 14.8% needed primary incisor extraction (17.4%, 14.3%, and 10.7% in each group, respectively). There was no predisposition toward a space deficiency or excess found in these subjects so the wait-and-see policy versus early extraction can be considered for lingually erupting permanent mandibular incisors. Lingual eruption of mandibular incisors is a common clinical problem in the early mixed dentition period that is a source of discomfort for parents of patients with this condition. The present study provides a unique insight into the prevalence of the problem as well as the clinical decisions such as favoring retention of primary incisors as long as possible, the extraction of these primary teeth, placement of lower lingual holding arches, or referral for comprehensive orthodontic treatment. These types of data should not be regarded as standards but as illustrative of several key factors that are still not well-understood or which are still ignored.

Estimating the color of maxillary central incisors based on age and gender

PubMed Central

Gozalo-Diaz, David; Johnston, William M.; Wee, Alvin G.

2008-01-01

Statement of problem There is no scientific information regarding the selection of the color of teeth for edentulous patients. Purpose The purpose of this study was to evaluate linear regression models that may be used to predict color parameters for central incisors of edentulous patients based on some characteristics of dentate subjects. Material and methods A spectroradiometer and an external light source were set in a noncontacting 45/0 degree (45-degree illumination and 0-degree observer) optical configuration to measure the color of subjects’ vital craniofacial structures (maxillary central incisor, attached gingiva, and facial skin). The subjects (n=120) were stratified into 5 age groups with 4 racial groups and balanced for gender. Linear first-order regression was used to determine the significant factors (α=.05) in the prediction model for each color direction of the color of the maxillary central incisor. Age, gender, and color of the other craniofacial structures were studied as potential predictors. Final predictions in each color direction were based only on the statistically significant factors, and then the color differences between observed and predicted CIELAB values for the central incisors were calculated and summarized. Results The statistically significant predictors of age and gender accounted for 36% of the total variability in L*. The statistically significant predictor of age accounted for 16% of the total variability in a*. The statistically significant predictors of age and gender accounted for 21% of the variability in b*. The mean ΔE (SD) between predicted and observed CIELAB values for the central incisor was 5.8 (3.2). Conclusions Age and gender were found to be statistically significant determinants in predicting the natural color of central incisors. Although the precision of these predictions was less than the median color difference found for all pairs of teeth studied, and may be considered an acceptable precision, further study is needed to reduce this precision to the limit of detection. Clinical Implications Age is highly correlated with the natural color of the central incisors. When age increases, the central incisor becomes darker, more reddish, and more yellow. Also, the women subjects in this study had lighter and less yellow central incisors than the men. PMID:18672125