The Reconstruction and Failure Analysis of The Space Shuttle Columbia
NASA Technical Reports Server (NTRS)
Russell, Richard W.
2010-01-01
This viewgraph presentation describes a very detailed reconstruction plan and failure analysis of The Space Shuttle Columbia accident. The contents include: 1) STS-107 Timeline; 2) Foam Impact; 3) Recovery; 4) Reconstruction; 5) Reconstruction Plan; 6) Reconstruction Hanger; 7) Pathfinders; 8) Aluminum Pathfinder; 9) Early Analysis - Left MLG Door Area; 10) Emphasis Switched to Left Hand Wing Leading Edge; 11) Wing Leading Edge Subsystem (LESS); 12) 3D Reconstruction of Left WLE; 13) Left Wing Tile Table; 14) LESS Observations; 15) Left Hand Wing Debris Points to RCC 8/9 - Slumped Tile; 16) Reconstructed View of LC/P 9 tile with I/B Tile; 17) Reconstructed View of Lower C/P 9 Tile; 18) Carrier Panel 8 - Upper; 19) Left Hand Wing Debris Points to RCC 8/9 - Erosion and RCC with attach hole intact; 20) Erosion on Panel 8 Upper Outboard Rib; 21) RCC Panels 8 & 9 Erosion Features; 22) Slumping Source for Carrier Panel 9 Tile was Revealed; 23) Debris Indicated Highest Probability Initiation Site; 24) Left Hand Wing Debris Points to RCC 8/9- Metallic Deposits; 25) Relative Metallic Deposition on L/H Wing Materials; 26) Metallic Deposit Example, LH RCC 8; 27) High Level Questions; 28) Analysis Plan Challenges; 29) Analysis Techniques; 30) Analysis Approach; 31) RCC Panel 8 Erosion Features; 32) Radiographic Features; 33) Radiography WLE LH Panel 8; 34) LH RCC 8 Upper Apex; 35) LH RCC 8 - Deposit Feature: Thick Tear Shaped; 36) LH RCC 8 - Deposit Feature: Thick Globules; 37) LH RCC 8 - Deposit Feature: Spheroids; 38) LH RCC 8 - Deposit Feature: Uniform Deposit; 39) Significant Findings - Sampling All Other panels; 40) Proposed Breach Location and Plasma Flow; 41) Corroborating Information - RCC Panel Debris Locations; 42) Corroborating Information - LH OMS Pod Analysis; 43) Corroborating Information - Impact Testing; and 44) Overall Forensic Conclusions.
76 FR 15800 - Airworthiness Directives; The Boeing Company Model MD-90-30 Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-22
... products listed above. This AD requires repetitive inspections for cracking of the left and right upper... by a report of a crack found in the upper skin panel at the aft inboard corner of a right horizontal stabilizer. We are issuing this AD to detect and correct cracks in the upper center skin panels of the...
14. CONTROL PANELS, EAST SIDE, MAIN FLOOR: TO LEFT (ORIGINAL ...
14. CONTROL PANELS, EAST SIDE, MAIN FLOOR: TO LEFT (ORIGINAL EQUIPMENT): UPPER FOUR GLASS BOXES ARE OVERCURRENT PROTECTIVE RELAYS; MIDDLE FOUR GLASS BOXES CONTAIN TESTING SWITCHES; LOWER TWO BOXES ARE DG1 METERING CHART RECORDERS TO RIGHT (MODERN EQUIPMENT): UPPER FOUR BLACK BOXES ARE PROTECTIVE SERVICE RELAYS; MIDDLE FOUR BOXES CONTAIN TESTING SWITCHES; LARGE BOX BELOW HOUSES REMOTE METERING SYSTEM METAL CABINETS (LABELED L-2 & L-4) BELOW CONTAIN ORIGINAL POWER CIRCUIT BREAKERS - Bonneville Power Administration South Bank Substation, I-84, South of Bonneville Dam Powerhouse, Bonneville, Multnomah County, OR
NASA Technical Reports Server (NTRS)
2004-01-01
This image composite shows two of the Mars Exploration Rover Opportunity's magnets, the 'capture' magnet (upper portion of left panel) and the 'filter' magnet (lower portion of left panel). Scientists use these tools to study the origins of martian dust in the atmosphere. The left panel was taken by the rover's panoramic camera. The four panels to the right, taken by the microscopic imager, show close-up views of the two magnets. The bull's-eye appearance of the capture magnet is a result of alternating magnetic fields, which are used to increase overall magnetic force. The filter magnet lacks these alternating fields and consequently produces a weaker magnetic force. This weaker force selectively attracts only strong magnetic particles.
Scientists were surprised by the large dark particles on the magnets because airborne particles are smaller in size. They theorize that these spots might be aggregates of small particles that clump together in a magnetic field.41. View of electro/mechanical fiber optic system panel in transmitter ...
41. View of electro/mechanical fiber optic system panel in transmitter building no. 102. Images projected to screen (panel at upper left) are projected to back side of screen located in MWOC to display changing information. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK
51. Interior of launch support building, minuteman power processor at ...
51. Interior of launch support building, minuteman power processor at lower left, power distribution panel at center, old diesel control panel at lower right, diesel battery at upper right, view towards west - Ellsworth Air Force Base, Delta Flight, Launch Facility, On County Road T512, south of Exit 116 off I-90, Interior, Jackson County, SD
12. VIEW OF TYPICAL CELL LOCKING MECHANISM, BUILDING 220 CELL ...
12. VIEW OF TYPICAL CELL LOCKING MECHANISM, BUILDING 220 CELL BLOCK 'A'. THE FACE PLATE OF THE CELL LOCK IS SHOWN REMOVED, EXPOSING THE ELECTROMAGNETIC LOCKING MECHANISM COMPRISING OF 2 MICROSWITCHES FOR LOCK POSITION INDICATION (FRONT LEFT CENTER AND REAR RIGHT CENTER OF PANEL); KEY SLOT MECHANICAL LOCK; LOCK SPRING (UPPER RIGHT OF PANEL); ELECTRIC SOLENOID (BOTTOM RIGHT CORNER OF PANEL); AND MISCELLANEOUS MECHANICAL LINKAGES. - U.S. Naval Base, Pearl Harbor, Brig, Neville Way near Ninth Street at Marine Barracks, Pearl City, Honolulu County, HI
6. VIEW NORTH, INTERIOR OF STORE Note ceiling stripped for ...
6. VIEW NORTH, INTERIOR OF STORE Note ceiling stripped for addition of supports, but tongue and groove wall panelling and shelving showing. To the left the stairway enclosure was added with door for front entry to the upper apartments. - 510 Central Avenue (Commercial Building), Ridgely, Caroline County, MD
2014-01-01
Comparison of footprints from various image sensors used in this study . Landsat (blue) is in the upper left panel, SPOT (yellow) is in the upper right...the higher resolution sensors evaluated as part of this study are limited to four spectral bands. Moderate resolution processing. ArcGIS ...moderate, effective useful coverage may be much more limited for a scene that includes significant amounts of water. Throughout the study period, SPOT 4
15. NBS TOP SIDE CONTROL ROOM. THE SUIT SYSTEMS CONSOLE ...
15. NBS TOP SIDE CONTROL ROOM. THE SUIT SYSTEMS CONSOLE IS USED TO CONTROL AIR FLOW AND WATER FLOW TO THE UNDERWATER SPACE SUIT DURING THE TEST. THE SUIT SYSTEMS ENGINEER MONITORS AIR FLOW ON THE PANEL TO THE LEFT, AND SUIT DATA ON THE COMPUTER MONITOR JUST SLIGHTLY TO HIS LEFT. WATER FLOW IS MONITORED ON THE PANEL JUST SLIGHTLY TO HIS RIGHT AND TEST VIDEO TO HIS FAR RIGHT. THE DECK CHIEF MONITORS THE DIVER'S DIVE TIMES ON THE COMPUTER IN THE UPPER RIGHT. THE DECK CHIEF LOGS THEM IN AS THEY ENTER THE WATER, AND LOGS THEM OUT AS THEY EXIT THE WATER. THE COMPUTER CALCULATES TOTAL DIVE TIME. - Marshall Space Flight Center, Neutral Buoyancy Simulator Facility, Rideout Road, Huntsville, Madison County, AL
2001-04-16
Workers (at left) at Astrotech, Titusville, Fla., observe the inside of the solar panel on the GOES-M satellite. The GOES-M provides weather imagery and quantitative sounding data used to support weather forecasting, severe storm tracking and meteorological research. The satellite is scheduled to launch July 12 on an Atlas-IIA booster, Centaur upper stage from Cape Canaveral Air Force Station
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-06
.... SUMMARY: We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires repetitive inspections for cracking of the left and right upper center skin panels of the... Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER...
A Study of Coronal-Interplanetary Coupling Mechanisms
1991-04-30
Magnetic Feild in Astrophys. J., Vol. 344, 478-493, 1989. 111.3. Reflection and Trapping of Transient Alfven Waves Propagating in an Isothermal...1990. VI.4. A Comparison Between Progressive Extension Method (PEM) and Iterative Method (IM) for Magnetic Feild Extrapolations in the Solar...Flight Center. Representative results are shown in the upper left panel of Figure 1 in which (a) shows the observed vector magnetic field at photospheric
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-23
...: We propose to adopt a new airworthiness directive (AD) for all Model DC-9-81 (MD-81), DC-9-82 (MD-82... inspections for cracking of the left and right upper center skin panels of the horizontal stabilizer, and..., West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. Hand...
2004-03-15
These four panels show the location of the newly discovered planet-like object, dubbed "Sedna," which lies in the farthest reaches of our solar system. Each panel, moving counterclockwise from the upper left, successively zooms out to place Sedna in context. The first panel shows the orbits of the inner planets, including Earth, and the asteroid belt that lies between Mars and Jupiter. In the second panel, Sedna is shown well outside the orbits of the outer planets and the more distant Kuiper Belt objects. Sedna's full orbit is illustrated in the third panel along with the object's current location. Sedna is nearing its closest approach to the Sun; its 10,000 year orbit typically takes it to far greater distances. The final panel zooms out much farther, showing that even this large elliptical orbit falls inside what was previously thought to be the inner edge of the Oort cloud. The Oort cloud is a spherical distribution of cold, icy bodies lying at the limits of the Sun's gravitational pull. Sedna's presence suggests that this Oort cloud is much closer than scientists believed. http://photojournal.jpl.nasa.gov/catalog/PIA05569
NASA Technical Reports Server (NTRS)
2004-01-01
These four panels show the location of the newly discovered planet-like object, dubbed 'Sedna,' which lies in the farthest reaches of our solar system. Each panel, moving counterclockwise from the upper left, successively zooms out to place Sedna in context. The first panel shows the orbits of the inner planets, including Earth, and the asteroid belt that lies between Mars and Jupiter. In the second panel, Sedna is shown well outside the orbits of the outer planets and the more distant Kuiper Belt objects. Sedna's full orbit is illustrated in the third panel along with the object's current location. Sedna is nearing its closest approach to the Sun; its 10,000 year orbit typically takes it to far greater distances. The final panel zooms out much farther, showing that even this large elliptical orbit falls inside what was previously thought to be the inner edge of the Oort cloud. The Oort cloud is a spherical distribution of cold, icy bodies lying at the limits of the Sun's gravitational pull. Sedna's presence suggests that this Oort cloud is much closer than scientists believed.
Interpreting Radar View near Mars' North Pole, Orbit 1512
NASA Technical Reports Server (NTRS)
2006-01-01
A radargram from the Shallow Subsurface Radar instrument (SHARAD) on NASA's Mars Reconnaissance Orbiter is shown in the upper-right panel and reveals detailed structure in the polar layered deposits of the north pole of Mars (with blowups shown in the upper-left panels). The sounding radar collected the data presented here during orbit 1512 of the mission, on Nov. 22, 2006. The horizontal scale in the radargram is distance along the ground track. It can be referenced to the ground track map shown in the lower right. The radar traversed from about 83.5 degrees to 80.5 degrees north latitude, or about 180 kilometers (110 miles). The ground track map shows elevation measured by the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor orbiter. Green indicates low elevation; reddish-white indicates higher elevation. The traverse is from the high elevation of the plateau formed by the layers to the lowlands below. The vertical scale on the radargram is time delay of the radar signals reflected back to Mars Reconnaissance Orbiter from the surface and subsurface. For reference, using an assumed velocity of the radar waves in the subsurface, time is converted to depth below the surface in two places: about 600 meters (2,000 feet) to the lowest of an upper series of bright reflectors and about 2,000 meters (6,500 feet) to the base of the polar layered deposits. The color scale of the radargram varies from black for weak reflections to bright yellow for strong reflections. The lower-left panel is a image from the Mars Orbiter Camera on Mars Global Surveyor showing exposed polar layering in the walls of a canyon near the north pole. The layering is divided into a finely structured upper unit (labeled 'Upper PLD') and less-well-defined stratigraphy in the lower unit (labeled 'Lower PLD'). The radargram clearly reveals the complexity of the layering in the upper unit, additional reflections from the lower unit, and the base of the entire stack of layered deposits. The layering manifests the recent climate history of Mars, recorded by the deposition and removal of ice and dust. The Shallow Subsurface Radar was provided by the Italian Space Agency (ASI). Its operations are led by the University of Rome and its data are analyzed by a joint U.S.-Italian science team. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena, manages the Mars Reconnaissance Orbiter for the NASA Science Mission Directorate, Washington.A Developmental Approach to Characterizing the Tissue-Invasion Gene Program in Breast Cancer
2001-09-01
OF PAGES Breast Cancer 24 16. PRICE CODE 17. SECURITY CLASSIFICATION 18. SECURITY CLASSIFICATION 19. SECURITY CLASSIFICATION 20. LIMITATION OF...induced host response. Am J. Pathol. 149:273-282, 1996. 4. Wolf, c., Rouyer, N., Lutz, Y., Adida , C., Loriot, M., Bellocq, J.P., Chambon, P., and Basset...following a 5 d incubation period. (upper left and right panels). In contrast, MT1-MMP-transfected cells perforated the BM in representative TEM and
Maghrebi, Houcine; Makni, Amine
2017-01-01
Mucinous cystadenomas are benign tumors with malignant potential. They are often revealed by non-specific abdominal pain, jaundice or an episode of acute pancreatitis. We here report an exceptional case of mucinous cystadenoma doubly complicated by acute pancreatitis and retroperitoneal rupture. The study involved a 30-year old non-weighted female patient, presenting with epigastric pain associated with left hypochondrium evolving over the last three months and which had intensified without fever or jaundice in the last 3 days. Clinical examination showed impingement on palpation of the epigastrium and of the left hypochondrium. There was no palpable mass. Laboratory tests were without abnormalities, except for lipasemia that was 8-times the upper normal. Abdominal CT scan showed bi-loculated cystic mass in the pancreas tail, measuring 111 mm * 73 mm, with a thin wall and a fluid content, associated with an infiltration of the left perirenal fascia. MRI (Panel A) showed mucinous cystadenoma with retroperitoneal rupture. The caudal portion of the main pancreatic duct was slightly dilated and communicated with the pancreatic cyst. The patient underwent surgery via bi-sub-costal approach. A cystic mass in the pancreas tail with retroperitoneal rupture associated with acute pancreatitis (outflow of necrotic content from left anterior prerenal space) was found. Caudal splenopancreatectomy was performed (Panel B). The postoperative course was uneventful. The anatomo-pathological examination of the surgical specimen showed pancreatic mucinous cystadenoma with low-grade dysplasia.
2014-07-01
statistically controlling for the effects of the pretest , the difference between the treatment and control group means on the posttest was large (i.e...effects of the pretest , the difference between the treatment and control group means on the posttest was large (i.e., partial eta squared of .708... posttest of the BISPA are shown in the upper-left panel of Fig. 1. Both groups performed poorly on the BISPA during the pretest , although the
2015-07-01
group and seven in the control group . Mean component skills implemented correctly on the pretest and posttest for the treatment and control groups for...in the control group showed no improvement (white bar on posttest column). In Figure 2, instead of reporting the percentage of trials implemented...above. Both groups performed poorly on the BISPA (Figure 3, upper-left panel) during the pretest (Ms = 19.17% and 13.89% on the pretest
61. Upper panel in cornerpower panel lcpa lower panel in ...
61. Upper panel in corner-power panel lcpa lower panel in corner-oxygen regeneration unit, at right-air conditioner control panel, on floor-bio-pack 45 for emergency breathing, looking northwest - Ellsworth Air Force Base, Delta Flight, Launch Control Facility, County Road CS23A, North of Exit 127, Interior, Jackson County, SD
6. COMPRESSOR CONTROL PANELS: AT LEFT, 6,000 P.S.I. PANEL, CIRCA ...
6. COMPRESSOR CONTROL PANELS: AT LEFT, 6,000 P.S.I. PANEL, CIRCA 1957; AT RIGHT, FACING CAMERA, 10,000 P.S.I. PANEL. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Helium Compression Plant, Test Area 1-115, intersection of Altair & Saturn Boulevards, Boron, Kern County, CA
50. DETAIL OF TYPICAL PANELS IN ANALOG RECORD BAY. LEFT ...
50. DETAIL OF TYPICAL PANELS IN ANALOG RECORD BAY. LEFT PANEL CONTAINS OSCILLOGRAPH AND CONTROLS. RIGHT PANEL CONTAINS CATHODE RAY TUBE AND INK-TYPE CHART RECORDER. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Operations Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
44. DETAIL VIEW OF CONTROL PANEL IN UPPER WEST WALL ...
44. DETAIL VIEW OF CONTROL PANEL IN UPPER WEST WALL CONTROL STATION, LOOKING EAST. UPPER INTERMEDIATE WALL AND UPPER EAST WALL CONTROL STATIONS IN BACKGROUND - Upper Mississippi River 9-Foot Channel Project, Lock & Dam 27, Granite City, Madison County, IL
Wave and Current Observations in a Tidal Inlet Using GPS Drifter Buoys
2013-03-01
right panel). ............17 Figure 10. DWR-G external sensor configuration (left panel). GT-31 GPS receiver is visible on the bottom left. Two GoPro ...receiver is visible on the bottom left. Two GoPro cameras are attached to the top of the buoy. DWR-G internal sensor configuration (right panel
Cosmic Ornament of Gas and Dust
NASA Technical Reports Server (NTRS)
2007-01-01
[figure removed for brevity, see original site] 4-Panel Version Figure 1 [figure removed for brevity, see original site] [figure removed for brevity, see original site] [figure removed for brevity, see original site] Silicon Gas Figure 2 Argon Figure 3 Dust Collection Figure 4 This beautiful bulb might look like a Christmas ornament but it is the blown-out remains of a stellar explosion, or supernova. Called Cassiopeia A, this supernova remnant is located about 10,000 light-years away in our own Milky Way galaxy. The remains are shown here in an infrared composite from NASA's Spitzer Space Telescope. Silicon gas is blue and argon gas is green, while red represents about 10,000 Earth masses worth of dust. Yellow shows areas where red and green overlap. The fact that these two features line up (as seen in yellow in the combined view) tells astronomers that the dust, together with the gas, was created in the explosion. This is the best evidence yet that supernovae are a significant source of dust in the early universe something that was postulated before, but not proven. Dust in our young universe is important because it eventually made its way into future stars, planets and even people. In figure 1, the upper left panel is a composite made up of three infrared views shown in the remaining panels. The bottom left view (figure 3) shows argon gas (green) that was synthesized as it was ejected from the star. The upper right panel (figure 2) shows silicon gas (blue) deep in the interior of the remnant. This cooler gas, called the unshocked ejecta, was also synthesized in the supernova blast. The bottom right view (figure 4) shows a collection of dust (red), including proto-silicates, silicate dioxide and iron oxide. The data for these images were taken by Spitzer's infrared spectrograph, which splits light apart to reveal the fingerprints of molecules and elements. In total, Spitzer collected separate 'spectra' at more than 1,700 positions across Cassiopeia A. Astronomers then created maps from this massive grid of data, showing the remnant in a multitude of infrared colors.Four Types of Deposits From Wet Conditions on Early Mars
NASA Technical Reports Server (NTRS)
2008-01-01
Each of these four panels shows a close-up view of a different type of geological deposit formed with the involvement of water, based on observations by NASA's Mars Reconnaissance Orbiter. All four date from the earliest period of Martian history, called the Noachian Period. The upper-left panel shows carbonates overlying clays in the Nili Fossae region of Mars. The view combines color-coded information from infrared spectral observations by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) with an underlying black-and-white image from the High Resolution Imaging Science Experiment (HiRISE) camera. Beneath a rough-textured capping rock unit (purple) lie banded olivine-bearing layers (yellow), which in some places have been partially or wholly altered to carbonate (green). The upper-right panel shows phyllosilicates and chlorides in the Terra Sirenum region, observed by CRISM and HiRISE. Medium-toned, finely fractured rocks containing chloride salts either underlie higher-standing, light-toned phyllosilicates or fill in low spots between them. Both sit on dark, eroded volcanic material. The lower-left panel shows the upper portion of canyon wall in Coprates Chasma, observed by HiRISE and CRISM. The chasm rim cuts across the middle of the image. The wall slopes down to the top of the image and continues outside the region shown, exposing multiple phyllosilicate-bearing layers in a section of rock 7 kilometers (4 miles) thick. Two of the layers shown here are finely fractured aluminum clays that dominate the lower half of the image, underlain by thin beds of iron-magnesium clays at the top of the image. The dark material is a remnant of an overlying layer of basaltic sand that has been partly eroded away by the wind. The lower-right panel shows phyllosilicates with vertically layered compositions in Mawrth Vallis, observed by HiRISE (presented in enhanced color) and CRISM. The brown-colored knob in the middle of the scene is a remnant of cap rock that overlies aluminum clays (blue-gray), which in turn overlie iron-magnesium clays (buff). NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena, manages the Mars Reconnaissance Orbiter for the NASA Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The Johns Hopkins University Applied Physics Laboratory led the effort to build the CRISM instrument and operates CRISM in coordination with an international team of researchers from universities, government and the private sector. The University of Arizona, Tucson, operates the HiRISE camera, which was built by Ball Aerospace & Technologies Corp., Boulder, Colo.VIEW OF PDP AND LTR CONTROL PANEL (LEFT) AND HEAVY ...
VIEW OF PDP AND LTR CONTROL PANEL (LEFT) AND HEAVY WATER CONTROL PANEL (RIGHT) AT SOUTH END OF PDP CONTROL ROOM, LEVEL 0, LOOKING SOUTH - Physics Assembly Laboratory, Area A/M, Savannah River Site, Aiken, Aiken County, SC
Singlet Fission's Two-for-One Potential - Continuum Magazine | NREL
small arrows (one points up, the other down) on lower line labeled S0. For Panel b, left half has wavy red line angling in from left side; one short arrow points down on lower line, one short arrow points half of Panel a. For Panel c, left half, one small arrow points down on lower line and another points
Earth Observation taken during the Expedition 36 mission
2013-08-24
ISS036-E-035685 (24 Aug. 2013) --- One of the Expedition 36 crew members aboard the International Space Station used a 50mm lens to record this high oblique view of the massive drought-aided Rim Fire in and around California's Yosemite National Park and the Stanislaus National Forest on Aug. 24. A portion of a solar array panel on the orbital outpost can be seen in upper left corner of the image. Editor's Note: The fire began on Aug. 17 and, as of Aug. 26, continues to burn. More than 224 square miles have been affected.
116. PNEUMATIC SUPPLY PANEL IN CENTER OF VEHICLE MECHANICAL SYSTEMS ...
116. PNEUMATIC SUPPLY PANEL IN CENTER OF VEHICLE MECHANICAL SYSTEMS ROOM (111) OF LSB (BLDG. 770), FACING NORTH. CONTROLS FOR FLOW AND PRESSURE REGULATION OF NITROGEN ON RIGHT SIDE OF PANEL; CONTROLS FOR HELIUM ON LEFT SIDE OF PANEL (AT LEFT EDGE OF PHOTO). - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
Failure Investigation of WB-57 Aircraft Engine Cowling
NASA Technical Reports Server (NTRS)
Martinez, J. E.; Gafka, T.; Figert, J.
2014-01-01
The NASA Johnson Space Center (JSC) in Houston, Texas is the home of the NASA WB-57 High Altitude Research Program. Three fully operational WB-57 aircraft are based near JSC at Ellington Field. The aircraft have been flying research missions since the early 1960's, and continue to be an asset to the scientific community with professional, reliable, customer-oriented service designed to meet all scientific objectives. The NASA WB-57 Program provides unique, high-altitude airborne platforms to US Government agencies, academic institutions, and commercial customers in order to support scientific research and advanced technology development and testing at locations around the world. Mission examples include atmospheric and earth science, ground mapping, cosmic dust collection, rocket launch support, and test bed operations for future airborne or spaceborne systems. During the return from a 6 hour flight, at 30,000 feet, in the clean configuration, traveling at 175 knots indicated airspeed, in un-accelerated flight with the auto pilot engaged, in calm air, the 2-man crew heard a mechanical bang and felt a slight shudder followed by a few seconds of high frequency vibration. The crew did not notice any other abnormalities leading up to, or for the remaining 1 hour of flight and made an uneventful landing. Upon taxi into the chocks, the recovery ground crew noticed the high frequency long wire antenna had become disconnected from the vertical stabilizer and was trailing over the left inboard wing, and that the left engine upper center removable cowling panel was missing, with noticeable damage to the left engine inboard cowling fixed structure. The missing cowling panel was never recovered. Each engine cowling panel is attached to the engine nacelle using six bushings made of 17-4 PH steel. The cylinder portions of four of the six bushings were found still attached to the aircraft (Fig 1). The other two bushings were lost with the panel. The other four bushings exhibited ratchet marks (multiple fatigue origins) which initiated in the sharp radius of the flange/cylinder fillet and were observed 300 degrees around the flange perimeter (Fig 2-3). Low stress, high cycle fatigue (HCF) was observed on the fracture surfaces of all four bushings (Fig 4). To improve the cowling panel joint design and enable return to flight, new cowling bushings with thicker flanges and a larger machined flange/cylinder fillet radius were installed on all cowling panels. In addition, a spacer was added to the joint to achieve the proper stack tolerance. Finally, a time change requirement for all cowling bushings was instituted.
1999-01-11
Bright white light (left) and blue light (upper right) appear on the solar panels of the Stardust spacecraft during lighting tests in the Payload Hazardous Servicing Facility. Stardust is scheduled to be launched aboard a Boeing Delta II rocket from Launch Pad 17A, Cape Canaveral Air Station, on Feb. 6, 1999, for a rendezvous with the comet Wild 2 in January 2004. Stardust will use a substance called aerogel to capture comet particles flying off the nucleus of the comet, plus collect interstellar dust for later analysis. The collected samples will return to Earth in a sample return capsule to be jettisoned as it swings by Earth in January 2006
4. View toward north, south face ("C" wall) of perimeter ...
4. View toward north, south face ("C" wall) of perimeter acquisition radar building showing entry (former docking facility) on left, behind satellite dish. On the bottom right can be seen the knockout panel provided for a future tunnel that was never used. The two "holes" above are referred to as bird screens, the upper air intake, on the fifth level, incorporates a plenium chamber (#510e), as does the lower (#2M8A) air exhaust, located on the second level mezzanine - Stanley R. Mickelsen Safeguard Complex, Perimeter Acquisition Radar Building, Limited Access Area, between Limited Access Patrol Road & Service Road A, Nekoma, Cavalier County, ND
49 CFR 572.15 - General description.
Code of Federal Regulations, 2014 CFR
2014-10-01
... Assembly SA 103C 030 Torso Assembly SA 103C 041 Upper Arm Assembly Left SA 103C 042 Upper Arm Assembly Right SA 103C 051 Forearm Hand Assembly Left SA 103C 052 Forearm Hand Assembly Right SA 103C 061Upper Leg Assembly Left SA 103C 062 Upper Leg Assembly Right SA 103C 071 Lower Leg Assembly Left SA 103C 072...
49 CFR 572.15 - General description.
Code of Federal Regulations, 2012 CFR
2012-10-01
... Assembly SA 103C 030 Torso Assembly SA 103C 041 Upper Arm Assembly Left SA 103C 042 Upper Arm Assembly Right SA 103C 051 Forearm Hand Assembly Left SA 103C 052 Forearm Hand Assembly Right SA 103C 061Upper Leg Assembly Left SA 103C 062 Upper Leg Assembly Right SA 103C 071 Lower Leg Assembly Left SA 103C 072...
49 CFR 572.15 - General description.
Code of Federal Regulations, 2013 CFR
2013-10-01
... Assembly SA 103C 030 Torso Assembly SA 103C 041 Upper Arm Assembly Left SA 103C 042 Upper Arm Assembly Right SA 103C 051 Forearm Hand Assembly Left SA 103C 052 Forearm Hand Assembly Right SA 103C 061Upper Leg Assembly Left SA 103C 062 Upper Leg Assembly Right SA 103C 071 Lower Leg Assembly Left SA 103C 072...
49 CFR 572.15 - General description.
Code of Federal Regulations, 2011 CFR
2011-10-01
... Assembly SA 103C 030 Torso Assembly SA 103C 041 Upper Arm Assembly Left SA 103C 042 Upper Arm Assembly Right SA 103C 051 Forearm Hand Assembly Left SA 103C 052 Forearm Hand Assembly Right SA 103C 061Upper Leg Assembly Left SA 103C 062 Upper Leg Assembly Right SA 103C 071 Lower Leg Assembly Left SA 103C 072...
A "reverse direction" technique of single-port left upper pulmonary resection.
Zhang, Min; Sihoe, Alan D L; Du, Ming
2016-08-01
Single-port video-assisted thoracoscopic surgery (VATS) left upper lobectomy is difficult amongst all the lobes. At the beginning of single-port lobectomies, the upper lobes were believed not to be amenable for single-port approach due to the difficult angulation for staplers. Gonzalez reported the first single-port VATS left upper lobectomy in 2011. We report a new technique of single-port VATS left upper lobectomy with the concept of "reverse direction". We divide the apical-anterior arterial trunk with upper vein in the last. The procedure sequence is described as follows: posterior artery, lingular artery, bronchus and finally upper vein & apical-anterior arterial trunk. This method could overcome the angular limitations frequently encountered in single-port VATS procedures; reduce the risk of injuries to pulmonary artery; broaden the indications of single-port the upper lobe of the left lung (LUL) to include hypoplastic lung fissures. Limitations of this new practice include the enlargement or severe calcifications of hilar and bronchial lymph nodes. A "reverse direction" technique of single-port left upper pulmonary resection is feasible and safe.
20. UPPER STATION, LOWER FLOOR, MOTOR ROOM, SWITCHING PANEL. ...
20. UPPER STATION, LOWER FLOOR, MOTOR ROOM, SWITCHING PANEL. - Monongahela Incline Plane, Connecting North side of Grandview Avenue at Wyoming Street with West Carson Street near Smithfield Street, Pittsburgh, Allegheny County, PA
Kuroda, Hiroaki; Sakao, Yukinori; Mun, Mingyon; Uehara, Hirofumi; Nakao, Masayuki; Matsuura, Yousuke; Mizuno, Tetsuya; Sakakura, Noriaki; Motoi, Noriko; Ishikawa, Yuichi; Yatabe, Yasushi; Nakagawa, Ken; Okumura, Sakae
2015-01-01
Background Left upper division segmentectomy is one of the major pulmonary procedures; however, it is sometimes difficult to completely dissect interlobar lymph nodes. We attempted to clarify the prognostic importance of hilar and mediastinal nodes, especially of interlobar lymph nodes, in patients with primary non-small cell lung cancer (NSCLC) located in the left upper division. Methods We retrospectively studied patients with primary left upper lobe NSCLC undergoing surgical pulmonary resection (at least lobectomy) with radical lymphadenectomy. The representative evaluation of therapeutic value from the lymph node dissection was determined using Sasako’s method. This analysis was calculated by multiplying the frequency of metastasis to the station and the 5-year survival rate of the patients with metastasis to the station. Results We enrolled 417 patients (237 men, 180 women). Tumors were located in the lingular lobe and at the upper division of left upper lobe in 69 and 348 patients, respectively. The pathological nodal statuses were pN0 in 263 patients, pN1 in 70 patients, and pN2 in 84 patients. Lymph nodes #11 and #7 were significantly correlated with differences in node involvement in patients with left upper lobe NSCLC. Among those with left upper division NSCLC, the 5-year overall survival in pN1 was 31.5% for #10, 39.3% for #11, and 50.4% for #12U. The involvement of node #11 was 1.89-fold higher in the anterior segment than that in the apicoposterior segment. The therapeutic index of estimated benefit from lymph node dissection for #11 was 3.38, #4L was 1.93, and the aortopulmonary window was 4.86 in primary left upper division NSCLC. Conclusions Interlobar node involvement is not rare in left upper division NSCLC, occurring in >20% cases. Furthermore, dissection of interlobar nodes was found to be beneficial in patients with left upper division NSCLC. PMID:26247881
Enhanced left-finger deftness following dominant upper- and lower-limb amputation.
Swanberg, Kelley M; Clark, Abigail M; Kline, Julia E; Yurkiewicz, Ilana R; Chan, Brenda L; Pasquina, Paul F; Heilman, Kenneth M; Tsao, Jack W
2011-09-01
After amputation, the sensorimotor cortex reorganizes, and these alterations might influence motor functions of the remaining extremities. The authors examined how amputation of the dominant or nondominant upper or lower extremity alters deftness in the intact limbs. The participants were 32 unilateral upper- or lower-extremity amputees and 6 controls. Upper-extremity deftness was tested by coin rotation (finger deftness) and pegboard (arm, hand, and finger deftness) tasks. Following right-upper- or right-lower-extremity amputation, the left hand's finger movements were defter than the left-hand fingers of controls. In contrast, with left-upper- or left-lower-extremity amputation, the right hand's finger performance was the same as that of the controls. Although this improvement might be related to increased use (practice), the finding that right-lower-extremity amputation also improved the left hand's finger deftness suggests an alternative mechanism. Perhaps in right-handed persons the left motor cortex inhibits the right side of the body more than the right motor cortex inhibits the left side, and the physiological changes induced by right-sided amputation reduced this inhibition.
21. UPPER STATION, LOWER FLOOR, MOTOR ROOM, SWITCHING PANEL, ELECTRICAL ...
21. UPPER STATION, LOWER FLOOR, MOTOR ROOM, SWITCHING PANEL, ELECTRICAL POWER ENTRY. - Monongahela Incline Plane, Connecting North side of Grandview Avenue at Wyoming Street with West Carson Street near Smithfield Street, Pittsburgh, Allegheny County, PA
12. CONTROL PANELS, WEST SIDE (LEFT & RIGHT), MAIN FLOOR: ...
12. CONTROL PANELS, WEST SIDE (LEFT & RIGHT), MAIN FLOOR: CENTER OF CLUSTERS, TOP BOX: MEGAWATT METER CENTER OF CLUSTERS, LOWER THREE BOXES: AMPERE METERS LEFT SIDE OF CLUSTERS: VOLTAGE CHART RECORDER RIGHT SIDE OF CLUSTERS: RECLOSE RELAY CENTER UNDER CLUSTERS: TESTING SWITCHES BELOW TESTING SWITCHES: BREAKER SWITCHES - Bonneville Power Administration South Bank Substation, I-84, South of Bonneville Dam Powerhouse, Bonneville, Multnomah County, OR
Chao, Samuel; Ying, Jay; Liew, Gailina; Marshall, Wayne; Liew, Choong-Chin; Burakoff, Robert
2013-07-23
Colonoscopy is widely regarded to be the gold standard for colorectal cancer (CRC) detection. Recent studies, however, suggest that the effectiveness of colonoscopy is mostly confined to tumors on the left side of the colon (descending, sigmoid, rectum), and that the technology has poor tumor detection for right-sided (cecum, ascending, transverse) lesions. A minimally invasive test that can detect both left-sided and right-sided lesions could increase the effectiveness of screening colonoscopy by revealing the potential presence of neoplasms in the right-sided "blind spot". We previously reported on a seven-gene, blood-based biomarker panel that effectively stratifies a patient's risk of having CRC. For the current study, we assessed the effectiveness of the seven-gene panel for the detection of left- and right-sided CRC lesions. Results were evaluated for 314 patients with CRC (left-sided: TNM I, 65; TNM II, 57; TNM III, 60; TNM IV, 17; unknown, 9. right-sided: TNM I, 28; TNM II, 29; TNM III, 38; TNM IV, 12; unknown, 1 and including two samples with both left and right lesions) and 328 control samples. Blood samples were obtained prior to clinical staging and therapy. Most CRC subjects had localized disease (stages I and II, 58%); regional (stage III) and systemic (stage IV) disease represented 32% and 9%, respectively, of the study population. The panel detected left-sided (74%, 154/208) and right-sided (85%, 92/108) lesions with an overall sensitivity of 78% (215/316) at a specificity of 66% (215/328). Treatable cancer (stages I to III) was detected with left-sided lesion sensitivity of 76% (138/182) and right-sided sensitivity of 84% (80/95). This seven-gene biomarker panel detected right-sided CRC lesions across all cancer stages with a sensitivity that is at least equal to that for left-sided lesions. This study supports the use of this panel as the basis for a patient-friendly, blood-based test that can be easily incorporated into a routine physical examination in advance of colonoscopy to provide a convenient companion diagnostic and a pre-screening alert, ultimately leading to enhanced CRC screening effectiveness.
Apparatus for encapsulating a photovoltaic module
Albright, Scot P.; Dugan, Larry M.
1995-10-24
The subject inventions concern various photovoltaic module designs to protect the module from horizontal and vertical impacts and degradation of solar cell efficiency caused by moisture. In one design, a plurality of panel supports that are positioned adjacent to the upper panel in a photovoltaic module absorb vertical forces exerted along an axis perpendicular to the upper panel. Other designs employ layers of glass and tempered glass, respectively, to protect the module from vertical impacts. A plurality of button-shaped channels is used around the edges of the photovoltaic module to absorb forces applied to the module along an axis parallel to the module and direct moisture away from the module that could otherwise penetrate the module and adversely affect the cells within the module. A spacer is employed between the upper and lower panels that has a coefficient of thermal expansion substantially equivalent to the coefficient of thermal expansion of at least one of the panels.
General view of the Space Shuttle Main Engine (SSME) assembly ...
General view of the Space Shuttle Main Engine (SSME) assembly with the expansion nozzle removed and resting on a cushioned mat on the floor of the SSME Processing Facility. The most prominent features in this view are the Low-Pressure Fuel Turbopump (LPFTP) on the upper left of the engine assembly, the LPFTP Discharge Duct looping around the assembly, the Gimbal Bearing on the top center of the assembly, the Electrical Interface Panel sits just below the Gimbal Bearing and the Low-Pressure Oxidizer Turbopump is mounted on the top right of the engine assembly in this view. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX
Panchal, Anita H; Patel, Vasumati G; Bhavsar, Neeta V; Mehta, Hardik V
2013-05-01
This case report presents a female patient whose chief complaint was of mobile and palatally drifted upper left central incisor which led to malalignment of upper anterior teeth. Orthodontic treatment of upper left central incisor was done with the help of 'Z' spring for the alignment of the upper anterior teeth. It was followed by splinting of upper anterior teeth to improve the stability and masticatory comfort. Regenerative periodontal surgery with Decalcified freeze dried bone allograft was done in relation to upper left central incisor.
Earth Observations taken by Expedition 41 crewmember
2014-10-01
ISS041-E-057060 (1 Oct. 2014) --- One of the Expedition 41 crew members aboard the International Space Station, flying at an altitude of 220 nautical miles, photographed this night panorama of parts of Europe on Oct. 1, 2014. Kiev, Ukraine is seen near the right edge of the photo in the vertical center. Lights of Constanta, Romania can be seen just below the Russian Progress 56 cargo vehicle docked to the orbital outpost at the top of the frame. The Black Sea is to the left of the Soyuz TMA-13M docked to the station on the left side of the scene. The Sea of Azov is at the right of the bottom portion the Soyuz. Mariupol is near bottom center; and Donetsk, although it appears as a (bottom-most) tiny smudge on the right side of the image, has a population of just under five million. Krasnodar, Russia is in the bottom left corner. Part of Greece is in the top of the image near the solar panel of the Progress, with Thessaloniki and Sofia among the many bright lights. Part of Turkey is in upper left of the land mass visible. Pre-dawn light coming through the atmosphere gives the station hardware a bluish color.
2004-07-27
KENNEDY SPACE CENTER, FLA. - On Launch Pad 17-B at Cape Canaveral Air Force Station, the MESSENGER (Mercury Surface, Space Environment, Geochemistry and Ranging) spacecraft is seen atop the Delta II upper stage booster (middle) and the Delta II launch vehicle below. The spacecraft is ready for installation of the fairing, a molded structure that fits flush with the outside surface of the upper stage booster and forms an aerodynamically smooth joint, protecting the spacecraft during launch. Seen on the right is one of the solar panels on the spacecraft. On the left is the heat-resistant, ceramic-cloth sunshade that will protect the spacecraft’s instruments as MESSENGER orbits the Mercury where the surface reaches a high temperature near 840 degrees Fahrenheit and the solar intensity can be 11 times greater than on Earth. MESSENGER is scheduled to launch Aug. 2 and is expected to enter Mercury orbit in March 2011. MESSENGER was built for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md.
15. INTERIOR OVERVIEW TO SOUTHEAST. ACTIVE CONTROL PANEL AND GENERATORS ...
15. INTERIOR OVERVIEW TO SOUTHEAST. ACTIVE CONTROL PANEL AND GENERATORS AT LEFT, HISTORIC CONTROL PANEL AT RIGHT. - Santa Ana River Hydroelectric System, SAR-1 Powerhouse, Redlands, San Bernardino County, CA
Astronaut Story Musgrave during deployment of solar array panels on HST
1993-12-09
STS061-48-027 (9 Dec 1993) --- Astronaut F. Story Musgrave moves about in the Space Shuttle Endeavour's cargo bay during the deployment of the solar array panels on the Hubble Space Telescope (HST) during the final of five STS-61 space walks. The left hand of astronaut Jeffrey A. Hoffman appears at lower left corner.
65. DETAIL OF ASSISTANT LAUNCH CONTROLLER AND LAUNCH CONTROLLER PANELS ...
65. DETAIL OF ASSISTANT LAUNCH CONTROLLER AND LAUNCH CONTROLLER PANELS LOCATED NEAR CENTER OF SLC-3E CONTROL ROOM. NOTE 30-CHANNEL COMMUNICATIONS PANELS. PAYLOAD ENVIRONMENTAL CONTROL AND MONITORING PANELS (LEFT) AND LAUNCH OPERATORS PANEL (RIGHT) IN BACKGROUND. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Operations Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
2010-07-02
indicated. Panel B, pancreatic infiltrating lymphocytes from 4 month-old NOD females ( left histogram) and males ( right histogram) (n = 8 mice/group...assay was used to measure the IL-2 secretion in the culture medium. Panel A, DN splenic cell cultures stimulated under Th1 ( left panel) and Th2 ( right ...variance test. The significance (p#0.005) of individual differences in frequency of DNCD3 thymocytes and splenocytes from female and male NOD littermates
NASA Technical Reports Server (NTRS)
2005-01-01
Since landing on Mars a year ago, NASA's pair of six-wheeled geologists have been constantly exposed to martian winds and dust. As a result, the Spirit rover has gradually experienced a slight decline in power as a thin layer of dust has accumulated on the solar panels, blocking some of the sunlight that is converted to electricity. In this enlarged image of a postage-stamp-size (3-centimeter-square, 1.2-inch-square) portion of one of Spirit's solar panels, a fine layer of martian dust coats electrical connections and metal surfaces. Individual silt grains or clumps of dust are visible where sediment has accumulated in crevices between solar cells and circuits. The upper right half of the image shows the edge of one of the rover's solar cells. The lower left half shows electrical wires bonded with silicon adhesive to the underlying composite surface; the circular abrasions are the result of sanding by hand on Earth. The braided wire is connected to a thermocouple used to measure temperature based on electrical resistance. Spirit took this image with its microscopic imager on martian day, or sol, 350 (Dec. 26, 2004).9. INTERIOR OF LIVING ROOM SHOWING OPEN PANEL DOOR TO ...
9. INTERIOR OF LIVING ROOM SHOWING OPEN PANEL DOOR TO BEDROOM NUMBER ONE AT PHOTO RIGHT, 6-LIGHT OVER 1 LIGHT SASH WINDOW ON REAR WALL AT PHOTO LEFT CENTER. FIREPLACE ORIGINALLY OCCUPIED SPACE UNDER ROUND HEATER VENT HOLE AT PHOTO LEFT. VIEW TO NORTHWEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
Bronchovascular anatomy of the upper lobes: evaluation with thin-section CT.
Lee, K S; Bae, W K; Lee, B H; Kim, I Y; Choi, E W; Lee, B H
1991-12-01
The anatomy of the bronchovascular trees of the upper lobes was evaluated with thin-section computed tomography (CT) in 50 patients. In all patients, the subsegmental bronchi could be seen, except the right B2b, left B1 + 2c, and left B3c. Regular anatomic relationships were seen between the right A3b and B3b (A3b was seen along the medial aspect of B3b in 45 patients [90%]), right A2a and B2a (A2a was seen along the posteromedial aspect of B2a in 45 patients [90%]), and left A1 + 2c and B1 + 2c (A1 + 2c was seen along the posterior aspect of B1 + 2c in 41 patients [82%]). Four patterns of bronchial branching were seen in the left upper lobe. The lateral branch of the posterior segmental vein of the upper lobes was an anatomic landmark dividing the anterior and posterior segments of the upper lobes. Three kinds of venous drainage patterns were identified in both the right and left upper lobes.
ERIC Educational Resources Information Center
Kirjavainen, Tanja
2012-01-01
Different stochastic frontier models for panel data are used to estimate education production functions and the efficiency of Finnish general upper secondary schools. Grades in the matriculation examination are used as an output and explained with the comprehensive school grade point average, parental socio-economic background, school resources,…
75 FR 16651 - Airworthiness Directives; The Boeing Company Model 747-200C and -200F Series Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-02
... upper chord of the upper deck floor beams in Area 5, and the inspection for fatigue cracking in the.... That AD currently requires repetitive inspections to find fatigue cracking in the floor panel... additional repetitive inspections to find fatigue cracking in the floor panel attachment fastener holes of...
[Thin-section computed tomography of the bronchi; 2. Right upper lobe and left upper division].
Matsuoka, Y; Ookubo, T; Ohtomo, K; Nishikawa, J; Kojima, K; Oyama, K; Yoshikawa, K; Iio, M
1990-02-01
Thin (2mm) section contiguous computed tomographic (CT) scans were obtained through the bronchi of the right upper lobe and the left upper division in 30 patients. All segmental bronchi were identified. The right subsegmental bronchi were identified in 100%, and the left subsegmental bronchi in 97%. The type of the orifice of the right bronchus was trifurcated (53%), the extension of B1 was apicoanterior (50%), and the size of B2b was equal to B3a (63%). The extension of the left B3 was subapicoanterior (38%), and the size of B1+2c was equal to B3a (62%).
SECOND FLOOR LOBBY; EAST WALL, UPPER LEFT (R). Glass plate ...
SECOND FLOOR LOBBY; EAST WALL, UPPER LEFT (R). Glass plate stereopair number PA-1430-139 LC-HABS-GS05-2L-E-2 (R) 157.4825. Left (printed) - Independence Hall Complex, Independence Hall, 500 Chestnut Street, Philadelphia, Philadelphia County, PA
14. View toward the northwest corner of the basement in ...
14. View toward the northwest corner of the basement in the north segment of the building. Portions of the basement floor are earth, and portions are concrete. For some undetermined reason an unbonded, narrow panel of brick occurs in the west (left) wall. A corbeled brick footing is seen under this panel, as if the panel is carrying a concentrated load. An identical element occurs to the left, outside the camera's view. These 'columns' may support the second-story brick facade over the ground floor store windows. Credit GADA/MRM. - Stroud Building, 31-33 North Central Avenue, Phoenix, Maricopa County, AZ
NASA Technical Reports Server (NTRS)
2004-01-01
KENNEDY SPACE CENTER, FLA. In the Orbiter Processing Facility, several workers check out the first Reinforced Carbon-Carbon panel to be installed on the left wing leading edge on Discovery. Second from right is Danny Wyatt, NASA Quality Assurance specialist; on the left is Dave Fuller, technician; behind Wyatt is John Legere, NASA Quality Assurance specialist. The RCC panels are mechanically attached to the wing with spars, a series of floating joints to reduce loading on the panels caused by wing deflections. The T-seals between each wing leading edge panel allow for lateral motion and thermal expansion differences between the RCC and the orbiter wing. Discovery has been named as the orbiter to fly on the first Return to Flight mission, STS- 114.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jonasson, Brian C.
2000-01-01
We determined migration timing and abundance of juvenile spring chinook salmon from three populations in the Grande Ronde River basin. We estimated 13,180 juvenile chinook salmon left upper rearing areas of the Grande Ronde River from July 1998 to June 1999; approximately 0.2% of the migrants left in summer, 18% in fall and 82% in spring. We estimated 15,949 juvenile chinook salmon left upper rearing areas of Catherine Creek from July 1998 to June 1999; approximately 0.2% of the migrants left in summer, 57% in fall, 2% in winter, and 41% in spring. We estimated 14,537 juvenile chinook salmon leftmore » the Grande Ronde Valley, located below the upper rearing areas in Catherine Creek and the Grande Ronde River, from October 1998 to June 1999; approximately 99% of the migrants left in spring. We estimated 31,113 juvenile chinook salmon left upper rearing areas of the Lostine River from July 1998 to June 1999; approximately 4% of the migrants left in summer, 57% in fall, 3% in winter, and 36% in spring. We estimated 42,705 juvenile spring chinook salmon left the Wallowa Valley, located below the mouth of the Lostine River, from August 1998 to June 1999; approximately 46% of the migrants left in fall, 6% in winter, and 47% in spring. Juvenile chinook salmon PIT-tagged on the upper Grande Ronde River were detected at Lower Granite Dam from 31 March to 20 June 1999, with a median passage date of 5 May. PIT-tagged salmon from Catherine Creek were detected at Lower Granite Dam from 19 April to 9 July 1999, with a median passage date of 24 May. PIT-tagged salmon from the Lostine River were detected at Lower Granite Dam from 31 March through 8 July 1999, with a median passage date of 4 May. Juveniles tagged as they left the upper rearing areas of the Grande Ronde River in fall and that overwintered in areas downstream were detected in the hydrosystem at a higher rate than fish tagged during winter in the upper rearing areas, indicating a higher overwinter survival in the downstream areas. Juveniles tagged as they left the upper rearing areas of Catherine Creek in fall and that overwintered in areas downstream were detected in the hydrosystem at a lower rate than fish tagged during winter in the upper rearing areas, indicating a higher overwinter survival in the upper rearing areas. Juveniles tagged as they left the upper rearing areas of the Lostine River in fall and that overwintered in areas downstream were detected in the hydrosystem at a similar rate to fish tagged during winter in the upper rearing areas, indicating similar overwinter survival in the upstream and downstream areas. Chinook salmon parr were generally associated with low velocity habitat types, that is pools, during both winter and summer in the Lostine River.« less
Tooth demineralization and associated factors in patients on fixed orthodontic treatment.
Salmerón-Valdés, Elías Nahúm; Lara-Carrillo, Edith; Medina-Solís, Carlo Eduardo; Robles-Bermeo, Norma Leticia; Scougall-Vilchis, Rogelio José; Casanova-Rosado, Juan Fernando; Pontigo-Loyola, América Patricia; Fernández Barrera, Miguel Ángel
2016-11-02
Dental demineralization was determined in patients at three time points during fixed orthodontic treatment. A multiple cross-sectional study included 108 patients divided into three different groups: (1) beginning of orthodontic treatment; (2) one year into treatment; and (3) two years into treatment. Demineralization was estimated using a DIAGNOdent pen. We obtained data from multiple tooth-by-tooth demineralization readings combined with salivary pH and patients' oral hygienic and dietary behaviors. A t-test for independent samples and Spearman´s correlation were performed. No demineralizations differences were found between the initial stage and one year into treatment. Between one and two years small differences were observed, but demineralization increased between the initial stage and second treatment year, predominating in upper right central incisors (p = 0.056), upper left lateral incisors (p = 0.040), both upper canines (p = 0.055 and p = 0.040, respectively) and first left premolars (p = 0.034 and p = 0.053, respectively). We did not find associations between oral hygiene and dietary behaviours or salivary pH. In conclusion, demineralization occurred in first year of treatment and increased during second year, predominating in the upper arch and the left side mainly in upper right central incisors, upper left lateral incisors, both upper canines, and first left premolars.
12. Examples of the elaborate and plain pressedsteel ceiling panels, ...
12. Examples of the elaborate and plain pressed-steel ceiling panels, here removed to the exterior of the building for photographing. A segment of the cornice has been placed above the larger panel. The panel on the left is comprised of four square components; the panel on the right is a single piece. Credit GADA/MRM. - Stroud Building, 31-33 North Central Avenue, Phoenix, Maricopa County, AZ
5. Main Control Switchboard (north end rear), view to the ...
5. Main Control Switchboard (north end rear), view to the south, with item 14 (the Libby transmission line panel) visible in left foreground, through item 9 (the Hot Springs No. 2 transmission line panel) obliquely visible on left side of the photograph. - Washington Water Power Clark Fork River Noxon Rapids Hydroelectric Development, Powerhouse, South bank of Clark Fork River at Noxon Rapids, Noxon, Sanders County, MT
20. INTERIOR OF BEDROOM NUMBER THREE SHOWING OPEN DOOR TO ...
20. INTERIOR OF BEDROOM NUMBER THREE SHOWING OPEN DOOR TO THE LIVING ROOM AT PHOTO LEFT, CLOSED PANEL DOOR TO WALK-IN CLOSET AT PHOTO CENTER LEFT, AND OPEN PANEL DOOR TO BATHROOM NUMBER TWO AT PHOTO RIGHT. OPEN DOOR TO BATHROOM NUMER TWO LOOKS THROUGH TO BEDROOM NUMBER FOUR. VIEW TO SOUTHEAST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
11. INTERIOR OF LIVING ROOM SHOWING OPEN PANEL DOOR TO ...
11. INTERIOR OF LIVING ROOM SHOWING OPEN PANEL DOOR TO BEDROOM NUMBER THREE AT LEFT PHOTO CENTER, AND OPEN PANEL DOOR TO THE HALL AT RIGHT PHOTO CENTER. VIEW TO WEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
Omori, Chieko; Toyama, Hiroaki; Takei, Yusuke; Ejima, Yutaka; Yamauchi, Masanori
2017-08-01
In patients with a bronchocutaneous fistula, positive pressure ventilation leads to air leakage and potential hypoxemia. A male patient with a right upper bronchocutaneous fistula was scheduled for esophageal reconstruction. His preoperative chest computed tomography image revealed aeration in the right middle and lower lobe, a large bulla in the left upper lobe, and pleural effusion and pneumonia in the left lower lobe. Therefore, left one-lung ventilation was considered to result in hypoxemia. Before anesthesia induction, the bronchocutaneous fistula was covered with gauze and film to prevent air leakage. After anesthesia induction, mask ventilation was performed with a peak positive pressure of 10 cmH 2 O. A left-sided double lumen endobronchial tube (DLT) was then inserted into the right main bronchus for occluding only the right superior bronchus, and two-lung ventilation was performed to minimize airway pressure and maintain oxygenation, which did not cause air leakage through the fistula. During anesthesia, no ventilation-related difficulty was faced. The method of inserting a left-sided DLT into the right main bronchus and occluding the right upper bronchus selectively by bronchial cuff is considered to be an option for mechanical ventilation in patients with a right upper bronchial fistula, as demonstrated in the present case.
9. VIEW OF FRANCIS TURBINE, GENERATOR DRIVE SHAFT. NOTE ORIGINAL ...
9. VIEW OF FRANCIS TURBINE, GENERATOR DRIVE SHAFT. NOTE ORIGINAL EXCITER AND GENERATOR RHEOSTATS ATOP CONTROL PANEL AT REAR. CONTROL PANEL IS ORIGINAL EXCEPT FOR HORIZONTAL TOP PANEL WITH CLOCK AT LEFT AND SYNCHROSCOPE AT RIGHT, LOOKING EAST - Centerville Hydroelectric System, Powerhouse, Butte Creek, Centerville, Butte County, CA
17. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN DOOR TO ...
17. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN DOOR TO BATHROOM NUMBER ONE AT EXTREME PHOTO LEFT, OPEN PANEL DOOR TO THE WALK-IN CLOSET AT PHOTO CENTER LEFT, OPEN PANEL DOOR TO HALL AT PHOTO CENTER RIGHT, AND A 6-LIGHT OVER 1-LIGHT SASH WINDOW ON THE WEST WALL AT PHOTO RIGHT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
Sliding, Insulating Window Panel Reduces Heat Loss.
ERIC Educational Resources Information Center
School Business Affairs, 1984
1984-01-01
A new sliding insulated panel reduces window heat loss up to 86 percent, and infiltration 60-90 percent, paying for itself in 3-9 years. This article discusses the panel's use and testing in the upper Midwest, reporting both technical characteristics and users' reactions. (MCG)
Yoo, Sylvia H; Rootman, Dan B; Goh, Alice; Savar, Aaron; Goldberg, Robert A
2016-01-01
A patient was found to have a metallic foreign body in the left anterior orbit on CT imaging, but the foreign body was not evident on clinical examination. On high-resolution ultrasonography, an object was identified in the left upper eyelid; however, the typical shadow with metallic foreign bodies was not seen. A high-power oscillating magnet was then applied to the eyelid, which revealed a subcutaneous metallic foreign body in the left upper eyelid. When used in conjunction, the high-resolution ultrasound and oscillating magnet successfully localized and facilitated retrieval of the metallic foreign body from the left upper eyelid.
Nasreen, Samia; Saidi, Samir; Ozturk, Ilhan
2018-06-01
We investigate this study to examine the relationship between economic growth, freight transport, and energy consumption for 63 developing countries over the period of 1990-2016. In order to make the panel data analysis more homogeneous, we apply the income level of countries to divide the global panel into three sub-panels, namely, lower-middle income countries (LMIC), upper-middle income countries (UMIC), and high-income countries (HIC). Using the generalized method of moments (GMM), the results prove evidence of bidirectional causal relationship between economic growth and freight transport for all selected panels and between economic growth and energy consumption for the high- and upper-middle income panels. For the lower-middle income panel, the causality is unidirectional running from energy consumption to economic growth. Also, the results indicate that the relationship between freight transport and energy use is bidirectional for the high-income countries and unidirectional from freight transport to energy consumption for the upper-middle and lower-middle income countries. Empirical evidence demonstrates the importance of energy for economic activity and rejects the neo-classical assumption that energy is neutral for growth. An important policy recommendation is that there is need of advancements in vehicle technology which can reduce energy intensity from transport sector and improve the energy efficiency in transport activity which in turn allows a greater positive role of transport in global economic activity.
Two Possible Ways Boron Got into Veins on Mount Sharp
2016-12-13
This graphic portrays two hypotheses about how the element boron ended up in calcium sulfate veins found within mudstone layers of the Murray formation on Mars' lower Mount Sharp. Hypothesis A is presented left-to-right in the upper four panels; hypothesis B in the lower four. Note that the two final panels are identical, depicting conditions found by NASA's Curiosity Mars rover. Calcium sulfate is the veins' main ingredient. The mudstone matrix around the veins resulted from deposition of sediments in a lake environment in Mars' Gale Crater billions of years ago. In hypothesis A: (1) Boron dissolved in the lake and was incorporated into the lake bottom clays that became the Murray formation. (2) The lake then dried and the bedrock fractured. (3) Later groundwater interacted with the clays under conditions that released the boron into the groundwater. (4) Then, the boron was deposited along with the calcium sulfate that makes up the bulk of these veins. In hypothesis B: (1) Boron was not incorporated into the clays as the lake was active. (2) Instead, when the lake dried out, it left a layer of boron-containing salts, and likely other types of salts, such as sodium chloride (table salt) and calcium sulfates, in an overlying layer that Curiosity has not yet visited. The bedrock fractured. (3) Groundwater later dissolved this layer of evaporite salts and moved the salts down into the older layers the rover has investigated. (4) The groundwater deposited the evaporite salts with the calcium sulfate that makes up the bulk of these veins. http://photojournal.jpl.nasa.gov/catalog/PIA21253
117. PNEUMATIC SUPPLY PANEL IN CENTER OF VEHICLE MECHANICAL SYSTEMS ...
117. PNEUMATIC SUPPLY PANEL IN CENTER OF VEHICLE MECHANICAL SYSTEMS ROOM (111), LSB (BLDG. 770), FACING NORTH. CONTROLS FOR FLOW AND PRESSURE REGULATION OF HELIUM ON LEFT SIDE OF PANEL; CONTROLS FOR NITROGEN ON RIGHT SIDE OF PANEL (AT RIGHT EDGE OF PHOTO). - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
44. VIEW OF UMBILICAL MAST AND LAUNCH PAD FROM SOUTHWEST. ...
44. VIEW OF UMBILICAL MAST AND LAUNCH PAD FROM SOUTHWEST. DOORS FOR THE UMBILICAL MAST TRENCH RAISED FOR MAINTENANCE POSITION OF 10 DEGREES. LAUNCHER IS RIGHT OF MAST; RAILS PARALLEL TO MAST. CONTROL PANELS LEFT TO RIGHT: ELECTRICAL PANEL, COMMUNICATIONS PANEL, AND MAST CONTROL PANEL. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
3. EAST FACADE OF THE UPPER FALLS GATE HOUSE, FOREBAY ...
3. EAST FACADE OF THE UPPER FALLS GATE HOUSE, FOREBAY IN LEFT FOREGROUND, SPOKANE CITY HALL IN LEFT BACKGROUND, LOOKING WEST. - Washington Water Power Spokane River Upper Falls Hydroelectric Development, Gate House, Spokane River, approximately 0.5 mile northeast of intersection of Spokane Falls Boulevard & Post Street, Spokane, Spokane County, WA
49 CFR 541.5 - Requirements for passenger motor vehicles.
Code of Federal Regulations, 2011 CFR
2011-10-01
...) Engine. (2) Transmission. (3) Right front fender. (4) Left front fender. (5) Hood. (6) Right front door. (7) Left front door. (8) Right rear door. (9) Left rear door. (10) Sliding or cargo door(s). (11) Front bumper. (12) Rear bumper. (13) Right rear quarter panel (passenger cars). (14) Left rear quarter...
49 CFR 541.5 - Requirements for passenger motor vehicles.
Code of Federal Regulations, 2010 CFR
2010-10-01
...) Engine. (2) Transmission. (3) Right front fender. (4) Left front fender. (5) Hood. (6) Right front door. (7) Left front door. (8) Right rear door. (9) Left rear door. (10) Sliding or cargo door(s). (11) Front bumper. (12) Rear bumper. (13) Right rear quarter panel (passenger cars). (14) Left rear quarter...
Nasolacrimal obstruction caused by root abscess of the upper canine in a cat.
Anthony, James M G; Sandmeyer, Lynne S; Laycock, Amanda R
2010-03-01
A 10-year-old, castrated male domestic short hair cat was presented to the Small Animal Clinic at the Western College of Veterinary Medicine with a presenting complaint of chronic, ocular discharge from the left eye. Ocular examination confirmed epiphora and mucopurulent discharge but there were no apparent reasons for the ocular discharge, and nasolacrimal obstruction was suspected. The cat had swelling of the left side of the face, severe periodontal disease and a fractured upper left canine tooth with pulpal exposure. Dacryocystorhinography revealed narrowing of the nasolacrimal duct above the root of the fractured upper left canine and dental radiographs showed a severe periapical lucency at the apex of the upper left canine tooth. The fractured canine tooth was removed. Subsequently, the ocular discharge and facial swelling resolved. After 2 years, the epiphora has never reoccurred. This is a noteworthy case because a suspected root abscess resulted in extralumenal compression of the nasolacrimal duct, which shows the importance of a thorough oral examination when nasolacrimal obstruction is evident.
1986-04-11
NASA 834, an F-14 Navy Tomcat, seen here in flight, was used at Dryden in 1986 and 1987 in a program known as the Variable-Sweep Transition Flight Experiment (VSTFE). This program explored laminar flow on variable sweep aircraft at high subsonic speeds. An F-14 aircraft was chosen as the carrier vehicle for the VSTFE program primarily because of its variable-sweep capability, Mach and Reynolds number capability, availability, and favorable wing pressure distribution. The variable sweep outer-panels of the F-14 aircraft were modified with natural laminar flow gloves to provide not only smooth surfaces but also airfoils that can produce a wide range of pressure distributions for which transition location can be determined at various flight conditions and sweep angles. Glove I, seen here installed on the upper surface of the left wing, was a "cleanup" or smoothing of the basic F-14 wing, while Glove II was designed to provide specific pressure distributions at Mach 0.7. Laminar flow research continued at Dryden with a research program on the NASA 848 F-16XL, a laminar flow experiment involving a wing-mounted panel with millions of tiny laser cut holes drawing off turbulent boundary layer air with a suction pump.
1987-04-22
NASA 834, an F-14 Navy Tomcat, seen here in flight, was used at Dryden in 1986 and 1987 in a program known as the Variable-Sweep Transition Flight Experiment (VSTFE). This program explored laminar flow on variable sweep aircraft at high subsonic speeds. An F-14 aircraft was chosen as the carrier vehicle for the VSTFE program primarily because of its variable-sweep capability, Mach and Reynolds number capability, availability, and favorable wing pressure distribution. The variable sweep outer-panels of the F-14 aircraft were modified with natural laminar flow gloves to provide not only smooth surfaces but also airfoils that can produce a wide range of pressure distributions for which transition location can be determined at various flight conditions and sweep angles. Glove I, seen here installed on the upper surface of the left wing, was a "cleanup" or smoothing of the basic F-14 wing, while Glove II was designed to provide specific pressure distributions at Mach 0.7. Laminar flow research continued at Dryden with a research program on the NASA 848 F-16XL, a laminar flow experiment involving a wing-mounted panel with millions of tiny laser cut holes drawing off turbulent boundary layer air with a suction pump.
ASTRONAUT CHARLE CONRAD - SKYLAB II (M-114)
1973-06-05
S73-27508 (6 June 1973) --- An artist's concept showing astronaut Charles Conrad Jr., Skylab 2 commander, attempting to free the solar array system wing on the Orbital Workshop during extravehicular activity at the Skylab 1 & 2 space station cluster in Earth orbit. The astronaut in the background is Joseph P. Kerwin, Skylab 2 science pilot. Here, Conrad is pushing up on the Beam Erection Tether (BET) to raise the stuck solar panel. The solar wing is only partially deployed; an aluminum strap is believed to be holding it down. Note the cut aluminum angle. Attach points for the BET are on the vent module of the solar array beam. The other end of the BET is attached to the "A" frame supporting the Apollo Telescope Mount (ATM) which is out of view. The aluminum strapping is to be out first, freeing the solar array beam. Then, if the beam does not automatically deploy, Conrad will attempt to help by pulling on the BET. The automatic openers may have become too cold to open without assistance. A deployed solar panel of the ATM is at upper left. The EVA is scheduled for Thursday, June 7th. This concept is by artist Paul Fjeld. Photo credit: NASA
10. INTERIOR OF BEDROOM NUMBER ONE SHOWING OPEN PANEL DOOR ...
10. INTERIOR OF BEDROOM NUMBER ONE SHOWING OPEN PANEL DOOR TO LIVING ROOM AT EXTREME PHOTO RIGHT, OPEN DOOR TO BATHROOM AT PHOTO CENTER, AND OPEN PANEL DOOR TO WALK-IN CLOSET AT PHOTO LEFT. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
Wing Leading Edge Debris Analysis
NASA Technical Reports Server (NTRS)
Shah, Sandeep; Jerman, Gregory
2004-01-01
This is a slide presentation showing the Left Wing Leading Edge (WLE) heat damage observations: Heavy "slag" deposits on select RCC panels. Eroded and knife-edged RCC rib sections. Excessive overheating and slumping of carrier panel tiles. Missing or molten attachment bolts but intact bushing. Deposit mainly on "inside" RCC panel. Deposit on some fractured RCC surface
66. DETAIL OF LAUNCH CONDUCTOR AND ASSISTANT LAUNCH CONDUCTOR PANELS ...
66. DETAIL OF LAUNCH CONDUCTOR AND ASSISTANT LAUNCH CONDUCTOR PANELS IN CONSOLE LOCATED CENTRALLY IN SLC-3E CONTROL ROOM. FROM LEFT TO RIGHT IN BACKGROUND: LAUNCH OPERATOR, LAUNCH ANALYST, AND FACILITIES PANELS. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Operations Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
50th Anniversary of the Civil Rights Act of 1964
2014-06-23
Dr. Michael Eric Dyson, a professor of sociology at Georgetown University, left; speaks as part of a panel discussion at an event celebrating the 50th Anniversary of the Civil Rights Act of 1964 on Monday, June 23, 2014 in the James E. Webb Auditorium at NASA Headquarters in Washington, DC. The panel was moderated by Suzanne Malveaux, a correspondent with CNN, left; and also included U.S. Representative Eddie Bernice Johnson, of Texas, second from left; Dr. Harriet Jenkins, Former Assistant Administrator for Equal Opportunity Programs at NASA, third from left; and Dr. Roger Launius, Associate Director of Collections and Curatorial Affairs at the Smithsonian National Air and Space Museum, second from right. The event highlighted the influence of the Civil Rights Act on NASA. Photo Credit: (NASA/Joel Kowsky)
1. Wells and Lake Sts. crossing. Tower 18 upper left. ...
1. Wells and Lake Sts. crossing. Tower 18 upper left. Wells Street Station Randolf bottom center. - Union Elevated Railroad, Union Loop, Wells, Van Buren, Lake Streets & Wabash Avenue, Chicago, Cook County, IL
F-15B in on ramp with close-up of test panels covered with advanced spray-on foam insulation materia
NASA Technical Reports Server (NTRS)
1999-01-01
Test panels covered with an advanced foam insulation material for the Space Shuttle's giant external fuel tank were test flown aboard an F-15B research aircraft at NASA's Dryden Flight Research Center, Edwards, Calif. Six panels were mounted on the left side of a heavily instrumented Flight Text Fixture mounted underneath the F-15B's fuselage. Insulation on this panel was finely machined over a horizontal rib structure to simulate in-line airflow past the tank; other panels had the ribs mounted vertically or had the insulation left in a rough as-sprayed surface. The tests were part of an effort by NASA's Marshall Space Flight Center to determine why small particles of the new insulation flaked off the tank on recent Shuttle missions. The tests with Dryden's F-15B were designed to replicate the pressure environment the Shuttle encounters during the first minute after launch. No noticeable erosion of the insulation material was noted after the flight experiment at Dryden.
Suzuki, Natsuko; Suzuki, Keisuke; Mizuno, Tomofumi; Kato, Yukari; Suga, Norihiro; Yoshino, Masabumi; Miura, Naoto; Banno, Shogo; Imai, Hirokazu
2016-01-01
A 34-year-old woman who had been using oral contraceptives for 10 years developed hypertensive crisis with papilloedema after an upper respiratory infection. Laboratory data showed hyperreninemic hyperaldosteronism and elevated levels of fibrinogen, fibrin, and fibrinogen degradation products. Echocardiography demonstrated two masses (18 mm) in the left ventricle. On the fourth hospital day, cerebral infarction, renal infarction, and upper mesenteric artery occlusion suddenly occurred despite the blood pressure being well-controlled using anti-hypertensive drugs. Echocardiography revealed the disappearance of the left ventricular masses, which suggested left ventricular thrombi. Cessation of the contraceptives and administration of heparin, warfarin, and anti-platelets drugs improved her general condition.
Crew Launch Vehicle (CLV) Avionics and Software Integration Overview
NASA Technical Reports Server (NTRS)
Monell, Donald W.; Flynn, Kevin C.; Maroney, Johnny
2006-01-01
On January 14, 2004, the President of the United States announced a new plan to explore space and extend a human presence across our solar system. The National Aeronautics and Space Administration (NASA) established the Exploration Systems Mission Directorate (ESMD) to develop and field a Constellation Architecture that will bring the Space Exploration vision to fruition. The Constellation Architecture includes a human-rated Crew Launch Vehicle (CLV) segment, managed by the Marshall Space Flight Center (MSFC), comprised of the First Stage (FS), Upper Stage (US), and Upper Stage Engine (USE) elements. The CLV s purpose is to provide safe and reliable crew and cargo transportation into Low Earth Orbit (LEO), as well as insertion into trans-lunar trajectories. The architecture's Spacecraft segment includes, among other elements, the Crew Exploration Vehicle (CEV), managed by the Johnson Space Flight Center (JSC), which is launched atop the CLV. MSFC is also responsible for CLV and CEV stack integration. This paper provides an overview of the Avionics and Software integration approach (which includes the Integrated System Health Management (ISHM) functions), both within the CLV, and across the CEV interface; it addresses the requirements to be met, logistics of meeting those requirements, and the roles of the various groups. The Avionics Integration and Vehicle Systems Test (ANST) Office was established at the MSFC with system engineering responsibilities for defining and developing the integrated CLV Avionics and Software system. The AIVST Office has defined two Groups, the Avionics and Software Integration Group (AVSIG), and the Integrated System Simulation and Test Integration Group (ISSTIG), and four Panels which will direct trade studies and analyses to ensure the CLV avionics and software meet CLV system and CEV interface requirements. The four panels are: 1) Avionics Integration Panel (AIP), 2) Software Integration Panel, 3) EEE Panel, and 4) Systems Simulation and Test Panel. Membership on the groups and panels includes the MSFC representatives from the requisite engineering disciplines, the First Stage, the Upper Stage, the Upper Stage Engine projects, and key personnel from other NASA centers. The four panels will take the results of trade studies and analyses and develop documentation in support of Design Analysis Cycle Reviews and ultimately the System Requirements Review.
Decoding facial blends of emotion: visual field, attentional and hemispheric biases.
Ross, Elliott D; Shayya, Luay; Champlain, Amanda; Monnot, Marilee; Prodan, Calin I
2013-12-01
Most clinical research assumes that modulation of facial expressions is lateralized predominantly across the right-left hemiface. However, social psychological research suggests that facial expressions are organized predominantly across the upper-lower face. Because humans learn to cognitively control facial expression for social purposes, the lower face may display a false emotion, typically a smile, to enable approach behavior. In contrast, the upper face may leak a person's true feeling state by producing a brief facial blend of emotion, i.e. a different emotion on the upper versus lower face. Previous studies from our laboratory have shown that upper facial emotions are processed preferentially by the right hemisphere under conditions of directed attention if facial blends of emotion are presented tachistoscopically to the mid left and right visual fields. This paper explores how facial blends are processed within the four visual quadrants. The results, combined with our previous research, demonstrate that lower more so than upper facial emotions are perceived best when presented to the viewer's left and right visual fields just above the horizontal axis. Upper facial emotions are perceived best when presented to the viewer's left visual field just above the horizontal axis under conditions of directed attention. Thus, by gazing at a person's left ear, which also avoids the social stigma of eye-to-eye contact, one's ability to decode facial expressions should be enhanced. Published by Elsevier Inc.
Context view showing Hoist House at center, upper end of ...
Context view showing Hoist House at center, upper end of inclined railroad in left foreground, part of valve house left of center and part of surge chamber in left background. View to southwest - Mystic Lake Hydroelectric Facility, Hoist House, On west slope of West Rosebud Creek, 1 3/4 miles northeast of Mystic Lake Dam, Fishtail, Stillwater County, MT
47 CFR 61.52 - Form, size, type, legibility, etc.
Code of Federal Regulations, 2012 CFR
2012-10-01
...,” “Original page 1,” “Original page 2,” etc. (1) All such pages must show, in the upper left-hand corner the... designation directly below; in the lower left-hand corner the issued date; in the lower right-hand corner the... and check sheet only. (2) As an alternative, the issuing carrier may show in the upper left-hand...
47 CFR 61.52 - Form, size, type, legibility, etc.
Code of Federal Regulations, 2014 CFR
2014-10-01
...,” “Original page 1,” “Original page 2,” etc. (1) All such pages must show, in the upper left-hand corner the... designation directly below; in the lower left-hand corner the issued date; in the lower right-hand corner the... and check sheet only. (2) As an alternative, the issuing carrier may show in the upper left-hand...
47 CFR 61.52 - Form, size, type, legibility, etc.
Code of Federal Regulations, 2013 CFR
2013-10-01
...,” “Original page 1,” “Original page 2,” etc. (1) All such pages must show, in the upper left-hand corner the... designation directly below; in the lower left-hand corner the issued date; in the lower right-hand corner the... and check sheet only. (2) As an alternative, the issuing carrier may show in the upper left-hand...
40 CFR Appendix I to Part 60 - Removable Label and Owner's Manual
Code of Federal Regulations, 2011 CFR
2011-07-01
... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES (CONTINUED) Pt. 60, App. I Appendix I to Part... label): • Manufacturer name (upper left hand corner, • Model name/number (upper left hand corner, • The... equipped wood heaters the 3.0 inch line shall be labeled “0” on the left end of the line (centered below...
40 CFR Appendix I to Part 60 - Removable Label and Owner's Manual
Code of Federal Regulations, 2010 CFR
2010-07-01
... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES (CONTINUED) Pt. 60, App. I Appendix I to Part... label): • Manufacturer name (upper left hand corner, • Model name/number (upper left hand corner, • The... equipped wood heaters the 3.0 inch line shall be labeled “0” on the left end of the line (centered below...
47 CFR 61.52 - Form, size, type, legibility, etc.
Code of Federal Regulations, 2011 CFR
2011-10-01
...,” “Original page 1,” “Original page 2,” etc. (1) All such pages must show, in the upper left-hand corner the... designation directly below; in the lower left-hand corner the issued date; in the lower right-hand corner the... and check sheet only. (2) As an alternative, the issuing carrier may show in the upper left-hand...
General view of the Space Shuttle Main Engine (SSME) assembly ...
General view of the Space Shuttle Main Engine (SSME) assembly with the expansion nozzle removed and resting on a cushioned mat on the floor of the SSME Processing Facility. The most prominent features in this view are the Low-pressure Fuel Turbopump discharge Duct looping from the upper left side of the engine assembly to the lower left side of the assembly, the Low-Pressure Oxidizer Turbopump (LPOTP) is on the upper left of the assembly in this view and the LPOTP Discharge Duct loops from the upper left to upper right. The sphere in the middle right side of the assembly in this view is the POGO System Accumulator , the partial sphere to its left and slightly more toward the center of the assembly is the Heat Exchanger on the Oxidizer Preburner side of the Hot Gas Manifold, beneath that is the High-Pressure Oxidizer Turbopump (HPOTP) and the HPOTP Discharge duct loops from the pump around to the lower left of the assembly. The Pneumatic Control Assembly is in the approximate center of the engine assembly in this view. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX
VIEW OF PDP CONTROL ROOM PANELS, LEVEL 0, LOOKING WEST. ...
VIEW OF PDP CONTROL ROOM PANELS, LEVEL 0, LOOKING WEST. THESE PANELS WERE WHERE THE A-MOTOR TAPES WOULD HAVE BEEN VISIBLE IN THE CONTROL ROOM. MORE RECENT MONITOR IN UPPER CENTER FOR LTR FLUX MONITORS - Physics Assembly Laboratory, Area A/M, Savannah River Site, Aiken, Aiken County, SC
52. VIEW OF REMAINS OF ORIGINAL 1907 CONTROL PANEL, LOCATED ...
52. VIEW OF REMAINS OF ORIGINAL 1907 CONTROL PANEL, LOCATED ON NORTH WALL OF EAST END OF CONTROL ROOM. PORTIONS OF THIS PANEL REMAINED IN USE UNTIL THE PLANT CLOSED. THE METERS AND CONTROLS ARE MOUNTED ON SOAPSTONE PANELS. THE INSTRUMENT IN THE LEFT CENTER OF THE PHOTOGRAPH IS A TIRRILL VOLTAGE REGULATOR. - New York, New Haven & Hartford Railroad, Cos Cob Power Plant, Sound Shore Drive, Greenwich, Fairfield County, CT
20. VIEW OF CONSOLE IN NORTHWEST CORNER OF SLC3W CONTROL ...
20. VIEW OF CONSOLE IN NORTHWEST CORNER OF SLC-3W CONTROL ROOM. PANELS FROM LEFT TO RIGHT: OPERATIONS AND CHECKOUT (LABELED POWER CONTROL AND MONITOR PANEL); RANGE SAFETY (LABELED DESTRUCT SYSTEM CONTROL AND MONITOR PANEL); BATTERY CLOCK PANELS. PEDAL FOR FOOT CONTROL OF COMMUNICATIONS HEADSET AND HEADSET IN FOREGROUND. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Operations Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
NASA Technical Reports Server (NTRS)
Arvin, G. H.; Israeli, L.; Stolpestad, J. H.; Stacher, G. W.
1981-01-01
The application of the superplastic forming/diffusion bonding (SPF/DB) process to supersonic cruise research is investigated. The capability of an SPF/DB titanium structure to meet the structural requirements of the inner wing area of the NASA arrow-wing advanced supersonic transport design is evaluated. Selection of structural concepts and their optimization for minimum weight, SPF/DB process optimization, fabrication of representative specimens, and specimen testing and evaluation are described. The structural area used includes both upper and lower wing panels, where the upper wing panel is used for static compression strength evaluation and the lower panel, in tension, is used for fracture mechanics evaluations. The individual test specimens, cut from six large panels, consist of 39 static specimens, 10 fracture mechanics specimens, and one each full size panel for compression stability and fracture mechanics testing. Tests are performed at temperatures of -54 C (-65 F), room temperature, and 260 C (500 F).
3. FLAME DEFLECTOR AT UPPER LEFT, FERROCEMENT APRON CONTROLS AT ...
3. FLAME DEFLECTOR AT UPPER LEFT, FERROCEMENT APRON CONTROLS AT LOWER RIGHT, VIEW TOWARDS NORTHEAST. - Glenn L. Martin Company, Titan Missile Test Facilities, Captive Test Stand D-4, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO
2016-03-17
New Horizons views of the informally named Sputnik Planum on Pluto (top) and the informally named Vulcan Planum on Charon (bottom). Both scale bars measure 20 miles (32 kilometers) long; illumination is from the left in both instances. The Sputnik Planum view is centered at 11°N, 180°E, and covers the bright, icy, geologically cellular plains. Here, the cells are defined by a network of interconnected troughs that crisscross these nitrogen-ice plains. At right, in the upper image, the cellular plains yield to pitted plains of southern Sputnik Planum. This observation was obtained by the Ralph/Multispectral Visible Imaging Camera (MVIC) at a resolution of 1,050 feet (320 meters) per pixel. The Vulcan Planum view in the bottom panel is centered at 4°S, 4°E, and includes the "moated mountain" Clarke Mons just above the center of the image. As well as featuring impact craters and sinuous troughs, the water ice-rich plains display a range of surface textures, from smooth and grooved at left, to pitted and hummocky at right. This observation was obtained by the Long Range Reconnaissance Imager (LORRI) at a resolution of 525 feet (160 meters) per pixel. http://photojournal.jpl.nasa.gov/catalog/PIA20535
NASA Astrophysics Data System (ADS)
Wang, Lei; Zhang, Xun; Wang, Lu Min; Huang, Hong Liang; Zhang, Yu; Liu, Yong Li; Feng, Wei Dong; Zhang, Rong Jun
2018-06-01
The effect of panel shape on hydrodynamic performances of a vertical v-shaped double-slotted cambered otter-board was investigated using engineering models in a wind tunnel. Three different shape panels (rhomboid, left trapezoid and isosceles trapezoid) were evaluated at a wind speed of 28 m/s. Parameters measured included: drag coefficient Cx, lift coefficient Cy, pitch moment coefficient Cm, center of pressure coefficient Cp , over a range of angle of attack (0° to 70°). These coefficients were used in analyzing the differences in the performance among the three otter-board models. Results showed that the maximum lift coefficient Cy of the otter-board model with the isosceles trapezoid shape panels was highest (2.103 at α=45°). The maximum Cy/Cx of the otter-board with the rhomboid shape panels was highest (3.976 at α=15°). A comparative analysis of Cm and Cp showed that the stability of otter-board model with the isosceles trapezoid shape panels is better in pitch, and the stability of otter-board model with the left trapezoid shape panels is better in roll. The findings of this study can offer useful reference data for the structural optimization of otter-boards for trawling.
16. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN PANEL DOOR ...
16. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN PANEL DOOR TO WALK-IN CLOSET AT PHOTO CENTER, OPEN PANEL DOOR FROM BEDROOM NUMBER ONE AT EXTREME PHOTO LEFT, AND 6-LIGHT OVER 1-LIGHT SASH WINDOW ON NORTH WALL AT PHOTO RIGHT. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
9. COLD CALIBRATION TEST STAND (H1) FROM LEFT TO RIGHT ...
9. COLD CALIBRATION TEST STAND (H-1) FROM LEFT TO RIGHT - WORK BENCH, CONTROL PANEL, CHEMICAL TANK. - Marshall Space Flight Center, East Test Area, Cold Calibration Test Stand, Huntsville, Madison County, AL
SECOND FLOOR LOBBY; EAST WALL, UPPER LEFT (R). Glass plate ...
SECOND FLOOR LOBBY; EAST WALL, UPPER LEFT (R). Glass plate stereopair number PA-1430-139 LC-HABS-GS05-2L-E-2 (R) 157.4825. Right (not printed) - Independence Hall Complex, Independence Hall, 500 Chestnut Street, Philadelphia, Philadelphia County, PA
3. SHOWING STREAM, STORE BUILDING (UPPER LEFT), SPRING HOUSE AND ...
3. SHOWING STREAM, STORE BUILDING (UPPER LEFT), SPRING HOUSE AND BATH HOUSE (NEAR STREAM), SOUTHEAST FRONTS AND SOUTHWEST SIDES (4 x 5 negative; 5 x 7 print) - Salt Sulpher Springs, U.S. Route 219, Salt Sulphur Springs, Monroe County, WV
70. DETAIL OF OXYGEN TRANSFER PRESSURE GAUGE IN UPPER LEFT ...
70. DETAIL OF OXYGEN TRANSFER PRESSURE GAUGE IN UPPER LEFT CORNER OF SKID ON RIGHT IN CA-133-1-C-69 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
DETAIL VIEW OF SINGLE PANEL POINTS TAKEN FROM BRIDGE DECK, ...
DETAIL VIEW OF SINGLE PANEL POINTS TAKEN FROM BRIDGE DECK, SHOWING CONNECTION BETWEEN VERTICAL AND UPPER CHORD MEMBER - White Bowstring Arch Truss Bridge, Spanning Yellow Creek at Cemetery Drive (Riverside Drive), Poland, Mahoning County, OH
Atmospheric Science Data Center
2013-04-16
... (MISR) illustrate the abundance of atmospheric particulate matter across the region. The left-hand panels are natural-color views from ... across the region is noticeable. The distinctive area of dark green vegetation (apparent below and left of image center) are situated in ...
5. DETAIL VIEW OF TWO PANEL POINTS OF TRUSS, SHOWING ...
5. DETAIL VIEW OF TWO PANEL POINTS OF TRUSS, SHOWING OVAL, TUBULAR UPPER CHORD MEMBER, VERTICALS, DIAGONALS, AND LOWER CHORD. - White Bowstring Arch Truss Bridge, Spanning Yellow Creek at Cemetery Drive (Riverside Drive), Poland, Mahoning County, OH
6. DETAIL VIEW OF SINGLE PANEL POINTS TAKEN FROM BRIDGE ...
6. DETAIL VIEW OF SINGLE PANEL POINTS TAKEN FROM BRIDGE DECK, SHOWING CONNECTION BETWEEN VERTICAL AND UPPER CHORD MEMBER. - White Bowstring Arch Truss Bridge, Spanning Yellow Creek at Cemetery Drive (Riverside Drive), Poland, Mahoning County, OH
28. INTERIOR OF KITCHEN SHOWING OPEN PANEL DOOR TO PANTRY ...
28. INTERIOR OF KITCHEN SHOWING OPEN PANEL DOOR TO PANTRY AT PHOTO RIGHT AND OPEN DOOR TO ORIGINAL SIDE-ENTRY UTILITY ROOM AT PHOTO LEFT. VIEW TO SOUTHWEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
11. INTERIOR OF BEDROOM NUMBER ONE SHOWING OPEN PANEL DOOR ...
11. INTERIOR OF BEDROOM NUMBER ONE SHOWING OPEN PANEL DOOR TO LIVING ROOM AT PHOTO RIGHT AND OPEN DOOR TO BATHROOM AT PHOTO LEFT. VIEW TO SOUTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
Author Correction: The physics of spreading processes in multilayer networks
NASA Astrophysics Data System (ADS)
De Domenico, Manlio; Granell, Clara; Porter, Mason A.; Arenas, Alex
2018-05-01
In the version of this Progress Article originally published, the left and right panels of Fig. 3, clarifying the details indicated within the centre panel, were mistakenly interchanged. This has now been corrected in all versions of the Progress Article.
Measurement of Hybrid III Dummy Properties and Analytical Simulation Data Base Development
1988-02-01
Rotation 50 for Itunading Manikin 29 Ilbow Vlexion-Extention at 00 Rotation for )7 oatvd Manikin 30U 1 lbow Y’l.A,*o-" r t inuon at 900 Medial Potation I8...Upper Am 129 10 Left Upper Arm 130 11 Right Fcreerm 131 12 Left Forearm 132 13 R :%ght Hand 133 14 Left Hand 134 15 Seated Right Upper Leg 135 16 Seated...Point Height 3.ref +.1 -- -- D "HO Point Location from 5.4ref_.l - - Beck Line R Shoulder Pivot Location 3.5+.2 3.7 4.4 from Beck Line I Thigh
Alkan, Ilter; Özveri, Hakan; Taş, Selim; Ipekçi, Tümay; Yılmaz, Serdar
2014-08-01
A 38-year-old woman presented with a lifelong history of involuntary urinary leakage. The patient reported that she had been operated for her urinary leakage with the diagnosis of stress incontinence with transobturator tape two times at two different institutions. Preoperative computed tomography scan showed complete duplication of the left kidney with poorly functioning upper pole and a tortuous left dilated ureter running down and opening into the vagina. Laparoscopic left upper pole heminephrectomy and ureterectomy were performed uneventfully. Her incontinence improved immediately after surgery.
41. VIEW NORTH OF UPPER LEVEL OF CRUSHER ADDITION. DINGS ...
41. VIEW NORTH OF UPPER LEVEL OF CRUSHER ADDITION. DINGS MAGNETIC PULLEY AT CENTER. ALSO SHOWS 100-TON CRUSHED UNOXIDIZED ORE BIN (RIGHT), PULLEY FORM 18 INCH BELT CONVEYOR CRUSHED OXIDIZED ORE BIN FEED AND STEPHENSADAMSON 25 TON/HR BUCKET ELEVATOR (UPPER CENTER). THE UPPER PORTION OF THE SAMPLING ELEVATOR IS ABOVE THE MAGNETIC PULLEY (CENTER LEFT) WITH THE ROUTE OF THE 16 INCH BELT CONVEYOR FINES FEED TO CRUSHED OXIDIZED ORE BIN TO ITS LEFT. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD
41. Upper level, electronic racks, left to rightprogrammer group, status ...
41. Upper level, electronic racks, left to right--programmer group, status command message processing group, UHF radio, impss rack security - Ellsworth Air Force Base, Delta Flight, Launch Facility, On County Road T512, south of Exit 116 off I-90, Interior, Jackson County, SD
43. Upper level, left to rightground missile guidance system liquid ...
43. Upper level, left to right--ground missile guidance system liquid cooling equipment, guidance and control coupler rack, programmer group - Ellsworth Air Force Base, Delta Flight, Launch Facility, On County Road T512, south of Exit 116 off I-90, Interior, Jackson County, SD
2004-07-27
KENNEDY SPACE CENTER, FLA. - On Launch Pad 17-B at Cape Canaveral Air Force Station, the MESSENGER (Mercury Surface, Space Environment, Geochemistry and Ranging) spacecraft is ready for installation of the fairing, a molded structure that fits flush with the outside surface of the Delta II upper stage booster and forms an aerodynamically smooth joint, protecting the spacecraft during launch. Seen on the left is one of the solar panels on the spacecraft. On the right is part of the heat-resistant, ceramic-cloth sunshade that will protect the spacecraft’s instruments as MESSENGER orbits the Mercury where the surface reaches a high temperature near 840 degrees Fahrenheit and the solar intensity can be 11 times greater than on Earth. MESSENGER is scheduled to launch Aug. 2 aboard a Boeing Delta II rocket and is expected to enter Mercury orbit in March 2011. MESSENGER was built for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md.
General view of the Space Shuttle Main Engine (SSME) assembly ...
General view of the Space Shuttle Main Engine (SSME) assembly with the expansion nozzle removed and resting on a cushioned mat on the floor of the SSME Processing Facility. The most prominent features in this view are the Low-pressure oxidizer Turbopump discharge Duct looping from the upper left side of the engine assembly to the lower left side of the assembly, the Low-Pressure Fuel Turbopump (LPFTP) is on the upper left of the assembly in this view and the LPFTP Discharge Duct loops from the upper left to upper right then turns back and down the assembly to the High-Pressure Fuel Turbopump on the lower right of the assembly. The Engine Controller and the Main fuel Valve Hydraulic Actuator are on the lower left portion of the assembly. The vertical rod that is in the approximate center of the engine assembly is a piece of ground support equipment call a Gimbal Actuator Replacement Strut which are used on the SSMEs when they are not installed in an orbiter. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX
2016-01-01
Upper ☐Lower Side of amputation: ☐Right ☐Left Level of original amputation (distal to…): ☐wrist/ ankle ☐elbow/knee...Right ☐Left Level of original amputation (distal to…): ☐wrist/ ankle ☐elbow/knee ☐shoulder/hip Initial Amputation Etiology...extremity: ☐Upper ☐Lower Side of amputation: ☐Right ☐Left Level of original amputation (distal to…): ☐wrist/ ankle ☐elbow/knee
26. Photograph of a photograph in possession of Rock Island ...
26. Photograph of a photograph in possession of Rock Island Arsenal Historical Office. SERIES OF VIEWS BEFORE CONSTRUCTION OF LOCK AND DAM, SHOWING RAIL BED ON UPPER DECK (UPPER LEFT), SWING SPAN IN ROTATION (UPPER RIGHT), EAST ELEVATION OF SWING SPAN AND BALTIMORE TRUSSES (CENTER), VEHICULAR ROADWAY ON LOWER DECK (LOWER LEFT), AND DRAW PIER. ORIGINALLY PUBLISHED 1898. - Rock Island Arsenal, Rock Island Bridge, Fort Armstrong Avenue, Rock Island, Rock Island County, IL
27. LAUNCH CONTROL CAPSULE. ACOUSTICAL ENCLOSURE. COMMUNICATIONS CONSOLE AT LEFT; ...
27. LAUNCH CONTROL CAPSULE. ACOUSTICAL ENCLOSURE. COMMUNICATIONS CONSOLE AT LEFT; LAUNCH CONTROL CONSOLE AT RIGHT. PADLOCKED PANEL AT TOP CENTER CONTAINS MISSILE LAUNCH KEYS. SHOCK ISOLATOR AT FAR LEFT. VIEW TO EAST. - Minuteman III ICBM Launch Control Facility November-1, 1.5 miles North of New Raymer & State Highway 14, New Raymer, Weld County, CO
DETAIL OF VERTICAL AT PANEL OVER PIER C, SHOWING DECK, ...
DETAIL OF VERTICAL AT PANEL OVER PIER C, SHOWING DECK, GUARDRAIL, VERTICAL AND UPPER CHORD, VIEW TO NORTHEAST. - Blue Water Bridge, Spanning St. Clair River at I-69, I-94, & Canadian Route 402, Port Huron, St. Clair County, MI
2014-09-30
negative (right panel c) and the kinetic energy dissipation is larger than that expected from meterological forcing alone (right panel a). This is...10.1002/grl.50919. Shcherbina, A. et al., 2014, The LatMix Summer Campaign: Submesoscale Stirring in the Upper Ocean., Bull. American Meterological
40. Upper level, electronic racks, left to rightstatus command message ...
40. Upper level, electronic racks, left to right--status command message processing group, UHF radio, impss rack security, power supply group rack - Ellsworth Air Force Base, Delta Flight, Launch Facility, On County Road T512, south of Exit 116 off I-90, Interior, Jackson County, SD
42. Upper level, electronic racks, left to rightguidance and control ...
42. Upper level, electronic racks, left to right--guidance and control coupler rack, programmer group, status command message processing group, UHF radio - Ellsworth Air Force Base, Delta Flight, Launch Facility, On County Road T512, south of Exit 116 off I-90, Interior, Jackson County, SD
Malignant perivascular epithelioid cell neoplasm of the mediastinum and the lung: one case report.
Liang, Wenjie; Xu, Shunliang; Chen, Feng
2015-06-01
A perivascular epithelioid cell neoplasm (PEComa) in the chest is rare, let alone in the mediastinum and lung. A 63-year-old man was admitted to our hospital with chest pain for more than 2 months and was found to have an opacity in his mediastinum and lung for 3 weeks. Enhanced chest computed tomography (CT) revealed a mass in both the left upper lobe and central anterior mediastinum. To identify the disease, a CT-guided percutaneous transthoracic needle biopsy of the upper left lung lesions was performed. The pathology result was consistent with epithelioid angiomyolipoma/PEComa. After a standard preparation for surgery, the neoplasms in the mediastinum and left lung were resected. The operative findings revealed extensive mediastinal tumor invasion in parts adjacent to the pericardium, including the mediastinal pleura, left pulmonary artery and vein, and phrenic nerve. The left lung tumor had invaded the lung membranes. The final pathologic diagnosis was malignant epithelioid angioleiomyoma in the left upper lung and mediastinum. Later, the mediastinal tumor recurred. The radiography of this case resembles left upper lobe lung cancer with mediastinal lymph node metastasis. Because this tumor lacks fat, the enhanced CT indicated that it was malignant but failed to identify it as a perivascular epithelioid cell neoplasm.This case reminds clinicians that, although most PEComa are benign, some can be malignant. As the radiology indicated, chest PEComas lack fat, which makes their preoperative diagnosis difficult. Therefore, needle biopsy is valuable for a definitive diagnosis.
Malignant Perivascular Epithelioid Cell Neoplasm of the Mediastinum and the Lung
Liang, Wenjie; Xu, Shunliang; Chen, Feng
2015-01-01
Abstract A perivascular epithelioid cell neoplasm (PEComa) in the chest is rare, let alone in the mediastinum and lung. A 63-year-old man was admitted to our hospital with chest pain for more than 2 months and was found to have an opacity in his mediastinum and lung for 3 weeks. Enhanced chest computed tomography (CT) revealed a mass in both the left upper lobe and central anterior mediastinum. To identify the disease, a CT-guided percutaneous transthoracic needle biopsy of the upper left lung lesions was performed. The pathology result was consistent with epithelioid angiomyolipoma/PEComa. After a standard preparation for surgery, the neoplasms in the mediastinum and left lung were resected. The operative findings revealed extensive mediastinal tumor invasion in parts adjacent to the pericardium, including the mediastinal pleura, left pulmonary artery and vein, and phrenic nerve. The left lung tumor had invaded the lung membranes. The final pathologic diagnosis was malignant epithelioid angioleiomyoma in the left upper lung and mediastinum. Later, the mediastinal tumor recurred. The radiography of this case resembles left upper lobe lung cancer with mediastinal lymph node metastasis. Because this tumor lacks fat, the enhanced CT indicated that it was malignant but failed to identify it as a perivascular epithelioid cell neoplasm. This case reminds clinicians that, although most PEComa are benign, some can be malignant. As the radiology indicated, chest PEComas lack fat, which makes their preoperative diagnosis difficult. Therefore, needle biopsy is valuable for a definitive diagnosis. PMID:26039123
Kah, Tan Aik; Yong, Ku Chui; Annuar, Faridah Hanom
2011-07-01
We report a case of 10-year-old Indian girl with history of multiple superficial angiomyxoma, presented with three months history of painless right upper lid swelling. There were no visual dysfunctions. Previously, the patient had multiple superficial angiomyxoma (left pinna, left upper cheek, left upper limb, chest, right axilla, hard palate) and epidermal cyst (chin). The histopathological specimens were negative to S-100 protein antibody. Systemic review and family history was unremarkable. Excision biopsy and upper lid reconstruction were performed. Intraoperatively the tumor was multilobulated, firm, well encapsulated and did not invade the underlying tarsal plate. Histopathological features of the upperlid tumor were consistent with nerves sheath myxoma (neurothekeoma). To the best of the authors' knowledge, this is the first reported case of neurothekeoma in association with multiple superficial angiomyxoma.
Kah, Tan Aik; Yong, Ku Chui; Annuar, Faridah Hanom
2011-01-01
We report a case of 10-year-old Indian girl with history of multiple superficial angiomyxoma, presented with three months history of painless right upper lid swelling. There were no visual dysfunctions. Previously, the patient had multiple superficial angiomyxoma (left pinna, left upper cheek, left upper limb, chest, right axilla, hard palate) and epidermal cyst (chin). The histopathological specimens were negative to S-100 protein antibody. Systemic review and family history was unremarkable. Excision biopsy and upper lid reconstruction were performed. Intraoperatively the tumor was multilobulated, firm, well encapsulated and did not invade the underlying tarsal plate. Histopathological features of the upperlid tumor were consistent with nerves sheath myxoma (neurothekeoma). To the best of the authors’ knowledge, this is the first reported case of neurothekeoma in association with multiple superficial angiomyxoma. PMID:24765328
103. View of transmitter building no. 102, missile warning operation ...
103. View of transmitter building no. 102, missile warning operation center, overall view of center in operation with staff at consoles. Note defcon (defense condition) display panel (upper right) showing "simulated status"activity level. Also note fiber optic display panel at upper right-center. Official photograph BMEWS Project by Hansen 30 September, 1976, clear as negative no. A-14568. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK
Fabrication and evaluation of advanced titanium structural panels for supersonic cruise aircraft
NASA Technical Reports Server (NTRS)
Payne, L.
1977-01-01
Flightworthy primary structural panels were designed, fabricated, and tested to investigate two advanced fabrication methods for titanium alloys. Skin-stringer panels fabricated using the weldbraze process, and honeycomb-core sandwich panels fabricated using a diffusion bonding process, were designed to replace an existing integrally stiffened shear panel on the upper wing surface of the NASA YF-12 research aircraft. The investigation included ground testing and Mach 3 flight testing of full-scale panels, and laboratory testing of representative structural element specimens. Test results obtained on full-scale panels and structural element specimens indicate that both of the fabrication methods investigated are suitable for primary structural applications on future civil and military supersonic cruise aircraft.
Weight optimal design of lateral wing upper covers made of composite materials
NASA Astrophysics Data System (ADS)
Barkanov, Evgeny; Eglītis, Edgars; Almeida, Filipe; Bowering, Mark C.; Watson, Glenn
2016-09-01
The present investigation is devoted to the development of a new optimal design of lateral wing upper covers made of advanced composite materials, with special emphasis on closer conformity of the developed finite element analysis and operational requirements for aircraft wing panels. In the first stage, 24 weight optimization problems based on linear buckling analysis were solved for the laminated composite panels with three types of stiffener, two stiffener pitches and four load levels, taking into account manufacturing, reparability and damage tolerance requirements. In the second stage, a composite panel with the best weight/design performance from the previous study was verified by nonlinear buckling analysis and optimization to investigate the effect of shear and fuel pressure on the performance of stiffened panels, and their behaviour under skin post-buckling. Three rib-bay laminated composite panels with T-, I- and HAT-stiffeners were modelled with ANSYS, NASTRAN and ABAQUS finite element codes to study their buckling behaviour as a function of skin and stiffener lay-ups, stiffener height, stiffener top and root width. Owing to the large dimension of numerical problems to be solved, an optimization methodology was developed employing the method of experimental design and response surface technique. Optimal results obtained in terms of cross-sectional areas were verified successfully using ANSYS and ABAQUS shared-node models and a NASTRAN rigid-linked model, and were used later to estimate the weight of the Advanced Low Cost Aircraft Structures (ALCAS) lateral wing upper cover.
Design and fabrication of titanium multi-wall Thermal Protection System (TPS) test panels
NASA Technical Reports Server (NTRS)
Blair, W.; Meaney, J. E., Jr.; Rosenthal, H. A.
1980-01-01
A titanium multiwall thermal protection system panel was designed. The panel is a nine sheet sandwich structure consisting of an upper and lower face sheet; four dimpled sheets, three septum sheets, and clips for attachment to a vehicle structure. An acceptable fabrication process was developed, and the panel design was verified through mechanical and thermal testing of component specimens. A design was completed which takes into consideration fabrication techniques, thermal properties, mechanical properties, and materials availability.
Mechanical Mixer for Rudder/Braking Wedge
NASA Technical Reports Server (NTRS)
Grimm, D.
1985-01-01
Right and left rudder panels moved separately. Mechanical mixer enables panels of two-panel rudder to rotate in same direction for steering or in opposite directions for dynamic braking. Steering and braking inputs separate so any combination of steering and braking motions executed simultaneously. Developed for aerodynamic braking of Space Shuttle orbiter, steering/braking drive train and rudder arrangement used for similar purposes on aircraft, thereby reducing sizes of thrust reversers.
Comparison of Muscle Activation during Dominant Hand Wrist Flexion when Writing.
Park, Soohee
2013-12-01
[Purpose] This study investigated the difference in muscle activation of the dominant upper extremity in right-handed and left-handed persons during writing. [Subjects] There were 36 subjects (16 left- handers/ 20 right- handers), and the study was conducted from 03/01/2012 to 30/3/2012. [Methods] Six electrodes were attached to the FCU (flexor carpi ulnaris), FCR (flexor carpi radialis), ECU (extensor carpi ulnaris), ECR (extensor carpi radialis), and both UT (upper trapezius) muscles. [Results] FCU muscle activation was 16.77±9.12% in left-handers and 10.29±4.13% (%MVIC) in right-handers. FCR muscle activation was 19.09±9.43% in left-handers and 10.64±5.03% in right-handers. In addition, the UT muscle activation on the writing hand side was 11.91±5.79% in left-handers and 1.66±1.19% in right-handers. [Conclusion] As a result of this study, it was discovered that left-handers used more wrist flexion in performance of the writing task with the dominant upper extremity than right-handers, and that the left-handers activated the wrist and shoulder muscles more than the right-handers. These results indicate a potential danger of musculoskeletal disease in left-hander.
2003-12-08
KENNEDY SPACE CENTER, FLA. - - In the Orbiter Processing Facility astronaut Danny Olivas listens to Greg Grantham (left) talking about the Reinforced Carbon Carbon panels used on the leading edge of the wing of the orbiters. Behind Olivas are engineers from around the Agency who are working on improving the RCC panels used on the wing leading edge. The gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.
287. Dennis Hill, Photographer July 1998 DETAIL VIEW OF UPPER ...
287. Dennis Hill, Photographer July 1998 DETAIL VIEW OF UPPER CHORD OF THROUGH TRUSS AT PANEL POINT, FACING NORTHWEST. - San Francisco Oakland Bay Bridge, Spanning San Francisco Bay, San Francisco, San Francisco County, CA
A case report on buccal mucosa graft for upper ureteral stricture repair.
Sabale, Vilas Pandurang; Thakur, Naveen; Kankalia, Sharad Kumar; Satav, Vikram Pramod
2016-01-01
Management of ureteric stricture especially long length upper one-third poses a challenging job for most urologists. With the successful use of buccal mucosa graft (BMG) for stricture urethra leads the foundation for its use in ureteric stricture also. A 35-year-old male diagnosedcase of left upper ureteric stricture, postureteroscopy with left percutaneous nephrostomy (PCN) in situ . Cysto-retrograde pyelography and nephrostogram done simultaneously suggestive of left upper ureteric stricture of 3 cm at L3 level. On exploration, diseased ureteral segment exposed, BMG harvested and sutured as onlay patch graft with supportive omental wrap. The treatment choice for upper ureteric long length stricture is inferior nephropexy, autotransplantation, or bowel interposition. With PCN in situ , inferior nephropexy becomes technically difficult, other two are morbid procedures. Use of BMG in this situation is technically better choice with all the advantages of buccal mucosa. Onlay BMG for ureteral stricture is technically easy, less morbid procedure and can be important choice in future.
[Left ventricular projectile migration after an accidental close-range gunshot wound].
Driessen, A; Tjardes, T; Eikermann, C; Trojan, S; Fröhlich, M; Grimaldi, G; Kosse, N
2016-07-01
We report the case of a 24-year-old female after sustaining a shotgun wound in the left upper extremity and chest. Initial emergency diagnostics revealed numerous shotgun pellets scattered throughout the left-side soft tissue, chest and upper lung lobe with one pellet having migrated into the left ventricle of the heart.Due to the devastating injury pattern, gunshot wounds are interdisciplinarily challenging and should include extended initial diagnostics, such as contrast agent CT. The potential toxicity of elevated lead blood levels have to be taken into further account.
Personalized Medicine in Veterans with Traumatic Brain Injuries
2011-05-01
UPGMA algorithm with cosine correlation as the similarity metric. Results are present as a heat map (left panel) demonstrating that the panel of 18... UPGMA algorithm with cosine correlation as the similarity metric. Results are presented as heat maps demonstrating the efficacy of using all 13
60. Shock isolator at center, pneumatic control group panel at ...
60. Shock isolator at center, pneumatic control group panel at left, power distribution box at right, all at right of entrance to lcc. - Ellsworth Air Force Base, Delta Flight, Launch Control Facility, County Road CS23A, North of Exit 127, Interior, Jackson County, SD
View southeast of main supervisory board showing panels 3 through ...
View southeast of main supervisory board showing panels 3 through 11; panel 3 at far left contains meters for monitoring power in the system; panel 4 contains controls for controlling heaters to keep track twitches free of ice and snow; panels 5, 6, and 7 date to the 1935 installation and control the catenary in the area of the station yard. These work on 120 volts direct current; panel 8 contains circuit breakers (rupture switches) which control power to individual tracks in the station area; panels 9 and 10 house controls for the West Philadelphia sub-station; panel 11 controls sub-station 13 in South Wilmington Delaware and miscellaneous meters - Thirtieth Street Station, Power Director Center, Thirtieth & Market Streets in Amtrak Railroad Station, Philadelphia, Philadelphia County, PA
April Showers Bring May Flowers to the Southern United States
NASA Technical Reports Server (NTRS)
2004-01-01
Vigorous vegetation growth in the Southern United States after heavy rains fell during April and early May, 2004, is quantified in these images and data products from the Multi-angle Imaging SpectroRadiometer (MISR). The images were acquired on April 1 (top set) and May 3 (bottom set), and extend through Kansas and Missouri, Oklahoma and Arkansas, and eastern Texas, with the Texas-Louisiana border at the bottom right-hand corner. The left-hand images are natural-color views from MISR's nadir camera. In the month between the April and May images, the overall greenness is enhanced, and the Boston and Ouachita Mountains are transformed from brownish hues to vivid green. The city of Dallas, Texas, appears as the pale gray area at lower left and the Red River (which corresponds with the Texas-Oklahoma border) is apparent as the yellowish feature flowing toward the lower left-hand edge. Scattered clouds appear in the upper right-hand corners of both images. Quantitative values for the vegetation changes are provided by the center and right-hand images. The middle panels show Leaf Area Index (LAI), or the area of leaves per unit area of ground below them, as measured from above. The right-hand panels show FPAR, which is the fraction of the photosynthetically active region (PAR) of visible light (400 - 700 nm) absorbed by green vegetation. LAI and FPAR are two important quantities for monitoring the photosynthetic activity and carbon uptake efficiency of live vegetation. MISR's LAI and FPAR products make use of aerosol retrievals to correct for atmospheric scattering and absorption effects, and use plant canopy structural models to determine the partitioning of solar radiation. Both of these aspects are facilitated by the multiangular nature of the MISR measurements. The Multi-angle Imaging SpectroRadiometer observes the daylit Earth continuously and every 9 days views the entire globe between 82 degrees north and 82 degrees south latitude. These data products were generated from a portion of the imagery acquired during Terra orbits 22810 and 23276. The panels cover an area of about 380 kilometers x 704 kilometers, and utilize data from blocks 61 to 65 within World Reference System-2 path 26. MISR was built and is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Office of Earth Science, Washington, DC. The Terra satellite is managed by NASA's Goddard Space Flight Center, Greenbelt, MD. JPL is a division of the California Institute of Technology.78 FR 64164 - Airworthiness Directives; the Boeing Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-28
.... ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain the Boeing... frame, forward and aft inner chords, floor support, bulkhead upper web on the upper left and right side of the bulkhead, and the bulkhead lower web on the lower left side of the bulkhead and repair if...
Test and Analysis Correlation of Form Impact onto Space Shuttle Wing Leading Edge RCC Panel 8
NASA Technical Reports Server (NTRS)
Fasanella, Edwin L.; Lyle, Karen H.; Gabrys, Jonathan; Melis, Matthew; Carney, Kelly
2004-01-01
Soon after the Columbia Accident Investigation Board (CAIB) began their study of the space shuttle Columbia accident, "physics-based" analyses using LS-DYNA were applied to characterize the expected damage to the Reinforced Carbon-Carbon (RCC) leading edge from high-speed foam impacts. Forensic evidence quickly led CAIB investigators to concentrate on the left wing leading edge RCC panels. This paper will concentrate on the test of the left-wing RCC panel 8 conducted at Southwest Research Institute (SwRI) and the correlation with an LS-DYNA analysis. The successful correlation of the LS-DYNA model has resulted in the use of LS-DYNA as a predictive tool for characterizing the threshold of damage for impacts of various debris such as foam, ice, and ablators onto the RCC leading edge for shuttle return-to-flight.
The Layer Cake Walls of Valles Marineris
NASA Technical Reports Server (NTRS)
2007-01-01
This image of the northern wall of Coprates Chasma, in Valles Marineris, was taken by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) at 1227 UTC (8:27 a.m. EDT) on June 16, 2007, near 13.99 degrees south latitude, 303.09 degrees east longitude. CRISM's image was taken in 544 colors covering 0.36-3.92 micrometers, and shows features as small as 20 meters (66 feet) across. The region covered is just over 10 kilometers (6.2 miles) wide at its narrowest point. Valles Marineris is a large canyon system straddling Mars' equator, with a total size approximating the Mediterranean Sea emptied of water. It is subdivided into several interconnected 'chasmata' each hundreds of kilometers wide and, in some cases, thousands of kilometers long. The walls of several of the chasmata, including Coprates Chasma, expose a section of Mars' upper crust about 5 kilometers (3 miles) in depth. Exposures like these show the layers of rock that record the formation of Mars' crust over geologic time, much as the walls of the Grand Canyon on Earth show part of our planet's history. The upper panel of this montage shows the location of the CRISM image on a mosaic from the Mars Odyssey spacecraft's Thermal Emission Imaging System (THEMIS), taken in longer infrared wavelengths than measured by CRISM. The CRISM image samples the base of Coprates Chasma's wall, including a conspicuous horizontal band that continues along the wall for tens of kilometers to the east and west, and a topographic shelf just above that. The middle two panels show the CRISM image in visible and infrared light. In the middle left panel, the red, green, and blue image planes show brightness at 0.59, 0.53, and 0.48 microns, similar to what the human eye would see. Color variations are subdued by the presence of dust on all exposed surfaces. In the middle right panel, the red, green, and blue image planes show brightness at 2.53, 1.51, and 1.08 microns. These three infrared wavelengths are the 'usual' set that the CRISM team uses to provide an overview of infrared data, because dust has a less obscuring effect, and because they are sensitive to a wide variety of minerals. Layering is clearly evident in the wall rocks. The conspicuous band running along the base of the chasma wall appears slightly yellowish, and the scarp at the edge of the topographic bench appears slightly green. The bottom two panels use combinations of wavelengths to show the strengths of absorptions that provide 'fingerprints' of different minerals. In the lower left panel, red shows strength of a 0.53-micron absorption due to oxidized iron in dust, green shows strength of an inflection in the spectrum at 0.6 microns that may be related to rock coatings, and blue shows strength of a 1-micron absorption due to the igneous minerals olivine and pyroxene. The conspicuous horizontal band appears slightly blue, indicating a stronger signature of olivine and/or pyroxene. In the lower right panel, red is a measure of an absorption particular to olivine, green is a measure of a 2.3-micron absorption due to phyllosilicates (clay-like minerals formed when rock was subjected to liquid water), and blue is a measure of absorptions particular to pyroxene. The conspicuous horizontal band is now resolved into an upper portion richer in pyroxene, underlain by material richer in olivine than the rest of the wall rock. Also, erosion-resistant material forming the topographic bench is underlain by phyllosilicate-containing material exposed on the scarp. Taken together, these data reveal a layer cake-like composition of the crustal material exposed in Coprates Chasma's wall. Most of the rock is rich in pyroxene, which is expected because much of Mars' crust consists of volcanic basaltic rock. However discrete layers are richer in olivine, and in some layers the presence of phyllosilicates indicates interaction of rock with liquid water. Because the phyllosilicate-containing layer is low on the walls and deeply buried, it likely represents an early period of Mars' history that was exposed when the canyon system formed. The Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) is one of six science instruments on NASA's Mars Reconnaissance Orbiter. Led by The Johns Hopkins University Applied Physics Laboratory, the CRISM team includes expertise from universities, government agencies and small businesses in the United States and abroad.Carbon Dioxide Fluctuations in Comet Hartley 2
2010-11-04
The upper panel of this figure shows small images of comet Hartley 2 taken by NASA EPOXI mission over time. The lower panel is a graph showing the variation of total brightness, and the variation of the total amount of carbon dioxide, during the time.
In-Situ Wave Observations in the High Resolution Air-Sea Interaction DRI
2008-09-30
Program ( CDIP ) Harvest buoy located in 204 m depth off Point Conception. The initial sea surface is assumed Gaussian and homogeneous, with spectral...of simulated sea surface elevation. Right panels: corresponding observed frequency-directional wave spectra (source: CDIP ). Upper panels: Typical
144. VIEW OF EAST WALL OF CONTROL ROOM (214), LSB ...
144. VIEW OF EAST WALL OF CONTROL ROOM (214), LSB (BLDG. 751). PNEUMATIC SUPPLY PANEL ON LEFT; NITROGEN AND HELIUM PIPING AT TOP; PURGE PANEL AT BOTTOM OF PHOTOGRAPH. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
Molinari, Francesco; Pirronti, Tommaso; Sverzellati, Nicola; Diciotti, Stefano; Amato, Michele; Paolantonio, Guglielmo; Gentile, Luigia; Parapatt, George K; D'Argento, Francesco; Kuhnigk, Jan-Martin
2013-01-01
We aimed to compare the intra- and interoperator variability of lobar volumetry and emphysema scores obtained by semi-automated and manual segmentation techniques in lung emphysema patients. In two sessions held three months apart, two operators performed lobar volumetry of unenhanced chest computed tomography examinations of 47 consecutive patients with chronic obstructive pulmonary disease and lung emphysema. Both operators used the manual and semi-automated segmentation techniques. The intra- and interoperator variability of the volumes and emphysema scores obtained by semi-automated segmentation was compared with the variability obtained by manual segmentation of the five pulmonary lobes. The intra- and interoperator variability of the lobar volumes decreased when using semi-automated lobe segmentation (coefficients of repeatability for the first operator: right upper lobe, 147 vs. 96.3; right middle lobe, 137.7 vs. 73.4; right lower lobe, 89.2 vs. 42.4; left upper lobe, 262.2 vs. 54.8; and left lower lobe, 260.5 vs. 56.5; coefficients of repeatability for the second operator: right upper lobe, 61.4 vs. 48.1; right middle lobe, 56 vs. 46.4; right lower lobe, 26.9 vs. 16.7; left upper lobe, 61.4 vs. 27; and left lower lobe, 63.6 vs. 27.5; coefficients of reproducibility in the interoperator analysis: right upper lobe, 191.3 vs. 102.9; right middle lobe, 219.8 vs. 126.5; right lower lobe, 122.6 vs. 90.1; left upper lobe, 166.9 vs. 68.7; and left lower lobe, 168.7 vs. 71.6). The coefficients of repeatability and reproducibility of emphysema scores also decreased when using semi-automated segmentation and had ranges that varied depending on the target lobe and selected threshold of emphysema. Semi-automated segmentation reduces the intra- and interoperator variability of lobar volumetry and provides a more objective tool than manual technique for quantifying lung volumes and severity of emphysema.
2004-03-10
KENNEDY SPACE CENTER, FLA. - Dan Phillips (left) and Donald Nielen, with United Space Alliance, watch a monitor as Jim Landy, NDE specialist with USA, prepares to examine a Reinforced Carbon Carbon panel (on the table, center) using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.
125. HYDRAULIC CONTROLS FOR MAST TRENCH DOORS ON LEFT SIDE ...
125. HYDRAULIC CONTROLS FOR MAST TRENCH DOORS ON LEFT SIDE OF HYDRAULIC CONTROL PANEL IN UMBILICAL MAST PUMP ROOM (209), LSB (BLDG. 751) - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
49. Environmental equipment room, cbr filter at left, ventilation control ...
49. Environmental equipment room, cbr filter at left, ventilation control panel in center, brine chiller controls at right, looking southeast - Ellsworth Air Force Base, Delta Flight, Launch Control Facility, County Road CS23A, North of Exit 127, Interior, Jackson County, SD
The Search for Life Beyond Earth
2014-07-14
Panelists (from left) Ellen Stofan, NASA Chief Scientist, left; John Grunsfeld, Associate Administrator for NASA's Science Mission DIrectorate, second from left; John Mather, Nobel Laureate and Senior Project Scientist for the James Webb Space Telescope (JWST) at NASA's Goddard Space Flight Center, third from left; Sara Seager, MacArthur Fellow and Professor of Planetary Science and Physics at the Massachusetts Institute of Technology, third from right; Dave Gallagher, Director for Astronomy and Physics at NASA's Jet Propulsion Laboratory, second from right; and Matt Mountain, Director of the Space Telescope Science Institute and Telescope Scientist for the JWST, right; are seen during a panel discussion on the search for life beyond Earth in the James E. Webb Auditorium at NASA Headquarters on Monday, July 14, 2014 in Washington, DC. The panel discussed how NASA's space-based observatories are making new discoveries and how the agency's new telescope, the James Webb Space Telescope, will continue this path of discovery after its schedule launch in 2018. Photo Credit: (NASA/Joel Kowsky)
5. INTERIOR VIEW OF UPPER LEVEL ROOM OF THE CONTROL ...
5. INTERIOR VIEW OF UPPER LEVEL ROOM OF THE CONTROL HOUSE LOCATED ON THE SOUTH END OF BIG TUJUNGA DAM SHOWING THE CONTROL PANEL. - Big Tujunga Dam, Control House, 809 West Big Tujunga Road, Sunland, Los Angeles County, CA
Abe, Tomonobu; Suenaga, Hiroto; Oshima, Hideki; Araki, Yoshimori; Mutsuga, Masato; Fujimoto, Kazuro; Usui, Akihiko
2015-04-01
An L-shaped incision combining an upper half mid-sternotomy and a left antero-lateral thoracotomy at the fourth intercostal space has been proposed by several authors for extensive aneurysms involving the aortic arch and the proximal thoracic descending aorta. This approach usually requires the division of the left internal thoracic artery at its mid position, thus making it unusable for coronary artery bypass. We herein report a modified surgical approach for simultaneous extensive arch and proximal thoracic descending aorta replacement and coronary artery bypass using the left internal thoracic artery combining a left antero-lateral thoracotomy at the sixth intercostal space and upper mid-sternotomy. The visualization of the whole diseased aorta down to the level below the hilum of the left lung was good, and the integrity of the left internal thoracic artery graft was preserved by early heparin administration before sternotomy.
NASA Technical Reports Server (NTRS)
Ashpis, David E. (Inventor)
2011-01-01
A solar panel cleaning device includes a solar panel having a plurality of photovoltaic cells arranged in rows and embedded in the solar panel with space between the rows. A transparent dielectric overlay is affixed to the solar panel. A plurality of electrode pairs each of which includes an upper and a lower electrode are arranged on opposite sides of the transparent dielectric and are affixed thereto. The electrodes may be transparent electrodes which may be arranged without concern for blocking sunlight to the solar panel. The solar panel may be a dielectric and its dielectric properties may be continuously and spatially variable. Alternatively the dielectric used may have dielectric segments which produce different electrical field and which affects the wind "generated."
NASA Technical Reports Server (NTRS)
Ashpis, David E. (Inventor)
2015-01-01
A solar panel cleaning device includes a solar panel having a plurality of photovoltaic cells arranged in rows and embedded in the solar panel with space between the rows. A transparent dielectric overlay is affixed to the solar panel. A plurality of electrode pairs each of which includes an upper and a lower electrode are arranged on opposite sides of the transparent dielectric and are affixed thereto. The electrodes may be transparent electrodes which may be arranged without concern for blocking sunlight to the solar panel. The solar panel may be a dielectric and its dielectric properties may be continuously and spatially variable. Alternatively the dielectric used may have dielectric segments which produce different electrical field and which affects the wind "generated."
[A man with pain in his upper jaw].
Jaspers, Gijs; van Gool, Lex
2011-01-01
A 66-year-old man came to the hospital with pain in the frontal left side of his upper jaw. Pressure along the left nostril could evoke a sharp pain, which radiated upwards. The patient had already consulted several specialists. After extended clinical and radiological investigation a mesiodens was found that gave pressure on the nasopalatine nerve.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-02
... new airworthiness directive (AD) for the Sikorsky Model S-92A helicopters. This AD requires a... (MGB) upper housing assembly rib on the left, right, and forward MGB mounting foot at specified... prompted by a report of a crack found on the MGB upper housing assembly left mounting foot forward rib that...
75 FR 66653 - Airworthiness Directives; McDonnell Douglas Corporation Model MD-90-30 Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-29
... the left and right engine aft mounts with new fasteners, in accordance with the Accomplishment... defects of the upper fasteners of the aft mount support fittings of the left and right engines, and corrective actions if necessary. This new AD requires repetitive replacement of the upper row of fasteners of...
Conservative treatment of an ankylosed tooth after delayed replantation: a case report.
Díaz, Jaime Andrés; Sandoval, Hector Paulo; Pineda, Patricia Irene; Junod, Pablo Antonio
2007-10-01
An 8-year-old boy sustained avulsion of his upper right maxillary central incisor and lateral luxation of his upper left maxillary incisors. Subsequently, the upper right maxillary central incisor developed replacement resorption, and both upper left maxillary incisors developed pulpal canal obliteration. In the ankylosed tooth, decoronation procedure was performed, and in the 44-month follow-up period the involved alveolar site showed vertical apposition of bone and continuing replacement resorption. Decoronation is a surgical procedure that allows preservation of the bone volume for the future, avoiding aesthetic disturbances and more aggressive treatments in cases where other therapeutic alternatives are not feasible.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hyman, M.
1980-03-04
A light-weight, low-cost and high efficiency solar panel includes a light-weight rectangular wood frame which surrounds and houses a copper absorber plate. A pair of spaced glazings, formed from plastic film materials, are disposed above the absorber to define a pair of enclosed air spaces. The lower glazing is capable of withstanding high temperatures and the upper glazing material is capable of providing good weather resistance. The material of the upper glazing extends fully about the frame to protect the entire frame from weathering. Insulation is provided beneath the absorber plate. The frame rests on top of a bottom sheetmore » of insulative foam plastic which is wrapped in a plastic envelope. The surrounding film of the outer glazing is bonded securely to the envelope to encase the entire panel within a protective sealed envelope of weather-resistant plastic film.« less
NASA Technical Reports Server (NTRS)
Wooley, J. H.
1974-01-01
Fairing panels were fabricated to evaluate the fabrication characteristics and flight service performance of PRD-49 (Kevlar-49) a composite reinforcing material and to compare it with the fiberglass which is currently in use. Panel configurations were selected to evaluate the PRD-49 with two resin matrix materials in sandwich and solid laminate construction. Left and right hand versions of these configurations were installed on L-1011's which will accumulate approximately 3000 flight hours per year per aircraft. The direct substitution of PRD-49 for fiberglass produced a twenty-six percent weight reduction on the panel configurations. Examination of these panels revealed that there was no visible difference between the PRD-49 and adjacent fiberglass panels.
Total anomalous pulmonary venous return
... the heart do not attach normally to the left atrium (left upper chamber of the heart). Instead, they attach ... returns through the pulmonary (lung) veins to the left side of the heart, which sends blood out ...
Discussion panel: field test design & data analysis
Daniel M. Schmitt; William E. Waters; B. Leo Cadogan; Gerald S. Walton
1985-01-01
I think it is time to open the panel. On my left respectively are Bill Waters, Professor of Entomology and Forestry, University of California, Berkeley; Gerald S. Walton, Biometrician, Northeastern Forest Experiment Station, Hamden; and Leo Cadogan, Forest Pest Management Institute, Canadian Forestry Service, Sault Ste. Marie, Ontario. My name is Dan Schmitt, Program...
13. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN PANEL DOOR ...
13. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN PANEL DOOR FROM BEDROOM NUMBER ONE AT PHOTO LEFT, AND OPEN DOORS TO THE TWO SEPARATE WALK-IN CLOSETS AT REAR OF ROOM AT PHOTO CENTER AND RIGHT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
NPS-SCAT (Solar Cell Array Tester), The Construction of NPS’ First Prototype CubeSat
2008-09-01
71 Figure 26. Pumpkin Solar Panel Clip Set on the Left and Clips Holding Solar...Panels on the Right......................................................................................................71 Figure 27. Pumpkin ...1998. The satellite provided a global, digital messaging system using spread spectrum techniques in the amateur radio 70 cm band. Most importantly
18. NORTH SIDE OF CONTROL ROOM SHOWING MAIN ELECTRIC PANEL ...
18. NORTH SIDE OF CONTROL ROOM SHOWING MAIN ELECTRIC PANEL ON LEFT, SIGNAL SWITCH BOX IN CENTER, AND SIGNAL RELAYS ON RIGHT. RESISTOR BANK BEHIND ON RIGHT. BRIDGE TENDER'S DESK BEHIND ON SOUTH SIDE. (Fred Small) - Burlington Northern Railroad Bridge, Spanning Willamette River at River Mile 6.9, Portland, Multnomah County, OR
A&M. TAN607. Construction view, facing southwest. At upper left of ...
A&M. TAN-607. Construction view, facing southwest. At upper left of view, north-wall equipment and operating galleries take shape on hot shop. Pumice-block side of storage pool section in center left of view. Water filter building (TAN-608) next to north wall of pool. Hot liquid waste building (TAN-616) at right of view. Note concrete construction of TAN-608 and 616. Date: January 18, 1954. INEEL negative no. 9604 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID
22. PHOTOGRAPHIC ENLARGEMENT OF UPPER PHOTOGRAPH ON PAGE 986 IN ...
22. PHOTOGRAPHIC ENLARGEMENT OF UPPER PHOTOGRAPH ON PAGE 986 IN Keystone Coal Buyers Catalog, 1922, VIEW SOUTH, COMMUNITY OF ETHEL; ETHEL COAL COMPANY MINE SUPPLY BUILDING IS LOCATED IN MID-GROUND LEFT OF CENTER PARTIALLY OBSCURED BY ROOF OF HOUSE IN FOREGROUND - Ethel Coal Company & Supply Building, Left fork of Dingess Run (Ethel Hollow), Ethel, Logan County, WV
Peamkaroonrath, Chonthicha; Manosudprasit, Montien; Godfrey, Keith
2008-11-01
To assist the eruption of impacted upper teeth into an alveolar bone graft in a patient with a unilateral cleft lip and palate. An 8-year-old Thai boy with left unilateral complete cleft lip and palate had the chief complaint of anterior crossbite. He presented with a mild skeletal 3, dental Class III subdivision malocclusion, anterior crossbite, left unilateral posterior crossbite, moderate crowding in the upper arch with impaction of upper the left lateral incisor (tooth 22) and canine (tooth 23). In the first phase of treatment the posterior crossbite was corrected with a removable appliance with a 3-way screw. In the second phase the impacted teeth were surgically exposed, moved into the alveolar bone graft and the teeth aligned with fixed appliances. The upper left lateral incisor was extracted because of its questionable longevity. The orthodontic treatment resulted in normal overjet, overbite and an acceptable facial profile. A prosthesis replaced tooth 22. Forced eruption of impacted teeth can be carried out successfully in the cleft patients after an appropriate treatment plan has been formulated and following preparation of alveolar bone graft in the cleft site.
25. VIEW EAST IN BRIDGE TENDER'S HOUSE, (left) ORIGINAL LEVERS ...
25. VIEW EAST IN BRIDGE TENDER'S HOUSE, (left) ORIGINAL LEVERS FOR GASOLINE ENGINE OPERATION OF SWING-SPAN, (right) PANEL F ELECTRIC OPERATION OF GATES AND SWING-SPAN; new bridge located in background - Tipers Bridge, Spanning Great Wicomico River at State Route 200, Kilmarnock, Lancaster County, VA
Window types: (from left to right) Pair of 2x2 multipaned ...
Window types: (from left to right) Pair of 2x2 multipaned steel casements; triplet of 1x4 multipaned steel casements (center panel fixed); 1x3 multipaned steel casements. Building 20, facing southwest - Harbor Hills Housing Project, 26607 Western Avenue, Lomita, Los Angeles County, CA
Fabrication methods for YF-12 wing panels for the Supersonic Cruise Aircraft Research Program
NASA Technical Reports Server (NTRS)
Hoffman, E. L.; Payne, L.; Carter, A. L.
1975-01-01
Advanced fabrication and joining processes for titanium and composite materials are being investigated by NASA to develop technology for the Supersonic Cruise Aircraft Research (SCAR) Program. With Lockheed-ADP as the prime contractor, full-scale structural panels are being designed and fabricated to replace an existing integrally stiffened shear panel on the upper wing surface of the NASA YF-12 aircraft. The program involves ground testing and Mach 3 flight testing of full-scale structural panels and laboratory testing of representative structural element specimens. Fabrication methods and test results for weldbrazed and Rohrbond titanium panels are discussed. The fabrication methods being developed for boron/aluminum, Borsic/aluminum, and graphite/polyimide panels are also presented.
Hemispheric differences in recognizing upper and lower facial displays of emotion.
Prodan, C I; Orbelo, D M; Testa, J A; Ross, E D
2001-01-01
To determine if there are hemispheric differences in processing upper versus lower facial displays of emotion. Recent evidence suggests that there are two broad classes of emotions with differential hemispheric lateralization. Primary emotions (e.g. anger, fear) and associated displays are innate, are recognized across all cultures, and are thought to be modulated by the right hemisphere. Social emotions (e.g., guilt, jealousy) and associated "display rules" are learned during early child development, vary across cultures, and are thought to be modulated by the left hemisphere. Display rules are used by persons to alter, suppress or enhance primary emotional displays for social purposes. During deceitful behaviors, a subject's true emotional state is often leaked through upper rather than lower facial displays, giving rise to facial blends of emotion. We hypothesized that upper facial displays are processed preferentially by the right hemisphere, as part of the primary emotional system, while lower facial displays are processed preferentially by the left hemisphere, as part of the social emotional system. 30 strongly right-handed adult volunteers were tested tachistoscopically by randomly flashing facial displays of emotion to the right and left visual fields. The stimuli were line drawings of facial blends with different emotions displayed on the upper versus lower face. The subjects were tested under two conditions: 1) without instructions and 2) with instructions to attend to the upper face. Without instructions, the subjects robustly identified the emotion displayed on the lower face, regardless of visual field presentation. With instructions to attend to the upper face, for the left visual field they robustly identified the emotion displayed on the upper face. For the right visual field, they continued to identify the emotion displayed on the lower face, but to a lesser degree. Our results support the hypothesis that hemispheric differences exist in the ability to process upper versus lower facial displays of emotion. Attention appears to enhance the ability to explore these hemispheric differences under experimental conditions. Our data also support the recent observation that the right hemisphere has a greater ability to recognize deceitful behaviors compared with the left hemisphere. This may be attributable to the different roles the hemispheres play in modulating social versus primary emotions and related behaviors.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-22
...-related skin cracks and corrosion of the skin panel lap joints in the fuselage upper lobe, and repair if... inspections of the fuselage skin at the upper lobe skin lap joints for cracks and evidence of corrosion, and... correct fatigue cracking and corrosion in the fuselage upper lobe skin lap joints, which could lead to...
First-charge instabilities of layered-layered lithium-ion-battery materials
Croy, Jason R.; Iddir, Hakim; Gallagher, Kevin; ...
2015-09-03
Dynamical simulation at 1000 K shows the migration of oxygen ions in delithiated Li 7/6-xNi 1/4Mn 7/12O 2(withx= 1) from oxygen layers (lower panel, att= 0) to form O–O pairs (upper panel att= 35 ps) thereby lowering the energy of charged cathode material.
Evolution of short- and medium-range order in the melt-quenching amorphization of Ge 2 Sb 2 Te 5
Qiao, Chong; Guo, Y. R.; Dong, F.; ...
2018-01-01
Five structures (a tetrahedron and 3-, 4-, 5- and 6-fold octahedrons) are shown in the upper panel of the figure. Figures in the lower panel show the fractions of the five structures in Ge- and Sb-centered clusters with temperature.
F-16XL Wing Pressure Distributions and Shock Fence Results from Mach 1.4 to Mach 2.0
NASA Technical Reports Server (NTRS)
Landers, Stephen F.; Saltzman, John A.; Bjarke, Lisa J.
1997-01-01
Chordwise pressure distributions were obtained in-flight on the upper and lower surfaces of the F-16XL ship 2 aircraft wing between Mach 1.4 and Mach 2.0. This experiment was conducted to determine the location of shock waves which could compromise or invalidate a follow-on test of a large chord laminar flow control suction panel. On the upper surface, the canopy closure shock crossed an area which would be covered by a proposed laminar flow suction panel. At the laminar flow experiment design Mach number of 1.9, 91 percent of the suction panel area would be forward of the shock. At Mach 1.4, that value reduces to 65 percent. On the lower surface, a shock from the inlet diverter would impinge on the proposed suction panel leading edge. A chordwise plate mounted vertically to deflect shock waves, called a shock fence, was installed between the inlet diverter and the leading edge. This plate was effective in reducing the pressure gradients caused by the inlet shock system.
Author Correction: Single-molecule imaging by optical absorption
NASA Astrophysics Data System (ADS)
Celebrano, Michele; Kukura, Philipp; Renn, Alois; Sandoghdar, Vahid
2018-05-01
In the Supplementary Video initially published with this Letter, the right-hand panel displaying the fluorescence emission was not showing on some video players due to a formatting problem; this has now been fixed. The video has also now been amended to include colour scale bars for both the left- (differential transmission signal) and right-hand panels.
Ciuffolo, Fabio; Ferritto, Anna L; Muratore, Filippo; Tecco, Simona; Testa, Mauro; D'Attilio, Michele; Festa, Felice
2006-01-01
This purpose of this study was to investigate the immediate effects of plantar inputs on both the upper half muscle activity (anterior temporal, masseter, digastric, sternocleidomastoid, upper and lower trapezius, cervical) and the body posture, by means of electromyography (EMG) and vertical force platform, respectively. Twenty four (24) healthy adults, between the ages of 24 and 31 years (25.3 +/- 1.9), with no history of craniomandibular disorder or systemic musculoskeletal dysfunction, were randomly divided into two groups: test group (fourteen subjects) and control group (ten subjects). A first recording session (TO) measured the baseline EMG and postural patterns of both groups. After this session, the test group wore test shoes with insoles that stimulated the plantar surfaces, while the control group wore placebo shoes. After one hour, a second set of measurements (T1) were performed. Significant differences between the groups at baseline were observed in the left anterior temporal, left cervical, and left upper trapezius, as well as at T1 in the left anterior temporal and right upper trapezius (p < 0.05). Within-test group analysis showed a significant increase of the right upper trapezius activity (p < 0.05), whereas no changes were found by within-control group analysis. Lower risk of asymmetric muscle patterns and postural blindness in the test group compared to the control group was observed. Further studies are warranted to investigate the short and long-term effects of this type of insole, in patients with both craniomandibular-cervical and lower extremity disorders.
NASA Astrophysics Data System (ADS)
Derbentsev, I.; Karyakin, A. A.; Volodin, A.
2017-11-01
The article deals with the behaviour of a contact-monolithic joint of large-panel buildings under compression. It gives a detailed analysis and the descriptions of the stages of such joints failure based on the results of the tests and computational modelling. The article is of interest to specialists who deal with computational modelling or the research of large-panel multi-storey buildings. The text gives a valuable information on the values of their bearing capacity and flexibility, the eccentricity of load transfer from upper panel to lower, the value of thrust passed to a ceiling panel. Recommendations are given to estimate all the above-listed parameters.
24. INTERIOR OF BEDROOM NUMBER FOUR SHOWING OPEN DOOR TO ...
24. INTERIOR OF BEDROOM NUMBER FOUR SHOWING OPEN DOOR TO BATHROOM NUMBER TWO AT PHOTO LEFT, OPEN PANEL DOOR TO WALK-IN CLOSET AT PHOTO LEFT CENTER, AND OPEN DOOR TO LIVING ROOM AT PHOTO RIGHT CENTER. VIEW TO NORTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-12
... reduce the risk of life-threatening bleeding events in patients with non-valvular atrial fibrillation who... premarket approval application regarding the Boston Scientific WATCHMAN Left Atrial Appendage (LAA) Closure... placed in the left atrial appendage. This device is intended to prevent thrombus embolization from the...
:#ccc;text-align:center;padding:5px}.upper_button{text-align:right;padding-bottom:5px}.side_button[type ;width:175px;text-align:left;font-weight:bold;overflow:hidden}.left_head_title_alt{float:left;width:175px ;text-align:left;font-weight:bold;line-height:16px;margin-top:3px;padding-top:0}.left_head_add
Mao, Cuiping; Wei, Longxiao; Zhang, Qiuli; Liao, Xia; Yang, Xiaoli; Zhang, Ming
2013-01-01
A reduction in gray matter volume is common in patients with chronic back pain, and different types of pain are associated with gray matter abnormalities in distinct brain regions. To examine differences in brain morphology in patients with low back pain or neck and upper back pain, we investigated changes in gray matter volume in chronic back pain patients having different sites of pain using voxel-based morphometry. A reduction in cortical gray matter volume was found primarily in the left postcentral gyrus and in the left precuneus and bilateral cuneal cortex of patients with low back pain. In these patients, there was an increase in subcortical gray matter volume in the bilateral putamen and accumbens, right pallidum, right caudate nucleus, and left amygdala. In upper back pain patients, reduced cortical gray matter volume was found in the left precentral and left postcentral cortices. Our findings suggest that regional gray matter volume abnormalities in low back pain patients are more extensive than in upper back pain patients. Subcortical gray matter volume increases are found only in patients with low back pain. PMID:25206618
NASA Technical Reports Server (NTRS)
2006-01-01
21 July 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a small portion of the floor of Kaiser Crater in the Noachis Terra region, Mars. The terrain in the upper (northern) half of the image is covered by large windblown ripples and a few smoother-surfaced sand dunes. The dominant winds responsible for these features blew from the west/southwest (left/lower left). Location near: 47.2oS, 341.3oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Southern WinterTOP VIEW OF UPPER TRAM TERMINAL, PRIMARY ORE BIN, AND ...
TOP VIEW OF UPPER TRAM TERMINAL, PRIMARY ORE BIN, AND ORE CHUTE,LOOKING SOUTHWEST. TRAM MACHINERY AND GEARS ARE AT LOWER CENTER. A SMALL ELECTRIC MOTOR AT THE REAR LEFT OF THE TERMINAL PROBABLY WAS ADDED AFTER THE ORIGINAL CONSTRUCTION. THE MOVING CABLE OF THE TRAM WAS DRIVEN BY THESE GEARS AND THE LARGE WHEEL UNDERNEATH (SEE CA-291-31 FOR DETAIL). EMPTY TRAM BUCKETS CAME IN FROM THE LEFT, SWINGING AROUND TO THE CHUTES FROM THE ORE BIN TO BE LOADED FOR THE TRIP DOWN TO THE MILL (SEE CA-291-35 FOR DETAIL). THE BREAK OVER TOWER CAN BE SEEN IN THE DISTANCE AT TOP LEFT. THE SUPPORT TOWER BETWEEN THE UPPER TERMINAL AND THE BREAK OVER TOWER IS COLLAPSED. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA
GEMINI-TITAN (GT)-3 - EARTH-SKY VIEWS - CA
1965-03-23
S65-18741 (23 March 1965) --- Astronaut John W. Young took this picture during the Gemini-Titan 3 three-orbit mission as the spacecraft "Molly Brown" passed over Northern Mexico. The large light-brown area is the Sonoran Desert. The Colorado River runs from upper right to lower left. The lower portion of the picture is Mexico, the upper left is California, and the upper right is Arizona. The altitude of the spacecraft was 90 miles. Young used a hand-held modified 70mm Hasselblad camera with color film. The lens setting was 250th of a second at f/11.
Plaza, Oscar Alonso; Moreno, Freddy
2018-04-01
Two cases of anatomical variations of the thymus are presented with respect to the anatomical relations with the left brachiocephalic vein and found during the necropsy process. Less than 2 days after birth with Noonan Syndrome, when the left brachiocephalic vein was scanning behind the upper thymus horns, there were other adjacent lesions consisting of three supernumerary spleens and three hepatic veins. The second case was an 8-year-old infant with child malpractice who died from urinary sepsis due to obstructive uropathy, in which case the upper lobes of the thymus were fused and formed a ring through which the left brachiocephalic vein passed. Copyright © 2018 Elsevier B.V. All rights reserved.
Sabry, M A; al-Saleh, Q; al-Saw'an, R; al-Awadi, S A; Farag, T I
1995-07-01
A Somali female baby with right upper limb triplication, polythelia, left sided hemihypertrophy, congenital hip dislocation, facial dysmorphism, congenital heart disease, and scoliosis is described. It seems that the above described pattern of anomalies has not been reported before. The possible developmental genetic mechanism responsible for this phenotype is briefly discussed.
29. INTERIOR VIEW LOOKING SOUTHWEST IN THE ELECTRICAL MOTOR ROOM. ...
29. INTERIOR VIEW LOOKING SOUTHWEST IN THE ELECTRICAL MOTOR ROOM. CONTROL PANELS ARE ON THE LEFT SIDE OF THE IMAGE (MOST OF THE SALVAGEABLE EQUIPMENT HAS BEEN REMOVED FROM THESE PANELS. A TRANSFORMER FOR GENERAL ELECTRICAL NEEDS IN THE MILL IS LOCATED ABOVE THE DOOR. - Standard Gold Mill, East of Bodie Creek, Northeast of Bodie, Bodie, Mono County, CA
62. View of amplifiermodulator control system with power distribution panel ...
62. View of amplifier-modulator control system with power distribution panel on left, control power supply in middle, and amplifier modulator on right, second floor in transmitter building no. 102. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK
Installing a Carrier Panel on Endeavor in OPF 2
2007-01-19
In Orbiter Processing Facility bay 2, technicians Jesus Rodrigues (left) and James Johnson install a leading edge subsystem carrier panel on the right wing of Endeavour. The orbiter is scheduled for mission STS-118, targeted for launch on June 28. The mission will be the 22nd flight to the International Space Station, carrying another starboard array, S5, for installation.
Installing a Carrier Panel on Endeavor in OPF 2
2007-01-19
In Orbiter Processing Facility bay 2, technicians James Johnson (left) and Jesus Rodrigues install a leading edge subsystem carrier panel on the right wing of Endeavour. The orbiter is scheduled for mission STS-118, targeted for launch on June 28. The mission will be the 22nd flight to the International Space Station, carrying another starboard array, S5, for installation.
PBF Control Building (PER619). Interior of control room. Control console ...
PBF Control Building (PER-619). Interior of control room. Control console in center of room. Indicator panels along walls. Window shown in ID-33-F-120 is between control panels at left. Camera facing northwest. Date: May 2004. INEEL negative no. HD-41-7-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID
Potential of chicken feather fibre in wood MDF composites
Jerold E. Winandy; James H. Muehl; Jessie A. Micales; Ashok Raina; Walter Schmidt
2003-01-01
We made a series of aspen fibre medium density fibreboard panels adding various levels of chicken feather fibre to determine the relative effect of the feather fibre-wood fibre mixtures on composite panel properties. Chicken feathers are a waste product left over after processing chickens for meat. The feather fibre amounts used ranged from 20% to 95% and a 5%...
11. Exterior view, showing instrumentation and gauge panel at walkin ...
11. Exterior view, showing instrumentation and gauge panel at walk-in entry level (bottom) of Test Cell 7, Systems Integration Laboratory Building (T-28), looking west. Metal stair at left leads to working platform levels surrounding test cell. - Air Force Plant PJKS, Systems Integration Laboratory, Systems Integration Laboratory Building, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO
ERIC Educational Resources Information Center
Easterbrooks, Susan R.; Stephenson, Brenda H.
2012-01-01
In 1999, the National Reading Panel investigated arguments regarding how best to teach reading. The members of the panel examined thousands of articles on literacy development and identified six key factors in teaching reading. Further, the passage of No Child Left Behind in 2001 obligated teachers to use scientifically proven practices, or…
2003-09-09
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, United Space Alliance workers share the task of examining a Reinforced Carbon Carbon panel using flash thermography. From left are Paul Ogletree, Jim Landy (kneeling), Dan Phillips and Dan Kenna. Attached to the leading edge of the wing of the orbiters, the gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.
2003-09-09
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, United Space Alliance workers share the task of examining a Reinforced Carbon Carbon panel using flash thermography. From left are Dan Kenna, Jim Landy, Paul Ogletree and Dan Phillips. Attached to the leading edge of the wing of the orbiters, the gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.
2003-09-05
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, United Space Alliance workers Mike Hyatt (left) Saul Ngy (center) and Jerry Belt (right) lift a Reinforced Carbon Carbon (RCC) panel to attach onto the leading edge of the wing of the orbiter Atlantis. The gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.
2003-09-08
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, United Space Alliance workers Mike Hyatt (left), Saul Ngy (center) and Jerry Belt (right) prepare to install a Reinforced Carbon Carbon (RCC) panel to the leading edge of the wing of the orbiter Atlantis. The gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.
2003-09-05
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, United Space Alliance workers Mike Hyatt (left) Jerry Belt (center), and Saul Ngy (right), lift a Reinforced Carbon Carbon (RCC) panel they will attach to the leading edge of the wing of the orbiter Atlantis. The gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.
2003-09-05
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, United Space Alliance workers, from center, left to right, Saul Ngy, Jerry Belt and Mike Hyatt, prepare to attach a Reinforced Carbon Carbon (RCC) panel (on the table) to the leading edge of the wing of the orbiter Atlantis. The gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.
3. FLAME DEFLECTOR AT LEFT, COUNTERFORT AT RIGHT, CONTROL BUILDING ...
3. FLAME DEFLECTOR AT LEFT, COUNTERFORT AT RIGHT, CONTROL BUILDING B AT UPPER LEFT, VIEW TOWARDS NORTHWEST. - Glenn L. Martin Company, Titan Missile Test Facilities, CaptiveTest Stand D-3, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO
Davidson, Elizabeth J; Martin, Benson B; Rieger, Randall H; Parente, Eric J
2010-12-01
To (1) assess upper airway function by videoendoscopy in horses performing poorly after laryngoplasty and (2) establish whether dynamic collapse of the left arytenoid can be predicted by the degree of resting postsurgical abduction. Case series. Horses that had left laryngoplasty (n=45). Medical records (June 1993-December 2007) of horses evaluated for abnormal respiratory noise and/or poor performance after laryngoplasty were reviewed. Horses with video recordings of resting and exercising upper airway endoscopy were included and postsurgical abduction categorized. Horses with immediate postoperative endoscopy recordings were also evaluated and postsurgical abduction categorized. Relationships between resting postsurgical abduction and historical information with exercising endoscopic findings were examined. Dynamic collapse of the left arytenoid cartilage was probable in horses with no postsurgical abduction and could not be predicted in horses with grade 3 or 4 postsurgical abduction. Respiratory noise was associated with upper airway obstruction but was not specific for arytenoid collapse. Most horses with a left vocal fold had billowing of the fold during exercise. Other forms of dynamic collapse involved the right vocal fold, aryepiglottic folds, corniculate process of left arytenoid cartilage, dorsal displacement of soft palate, and pharyngeal collapse. Complex obstructions were observed in most examinations and in all horses with exercising collapse of the left arytenoid cartilage. There was no relationship between exercising collapse of the left arytenoid cartilage and grade 3 or 4 postsurgical abduction but was likely in horses with no abduction. © Copyright 2010 by The American College of Veterinary Surgeons.
Alteration of the Crust Beneath a Highland Crater
NASA Technical Reports Server (NTRS)
2007-01-01
This image of the wall of Capri Chasma, in Valles Marineris, was taken by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) at 1151 UTC (7:51 a.m. EDT) on October 6, 2007, near 12.03 degrees south latitude, 312.04 degrees east longitude. CRISM's image was taken in 544 colors covering 0.36-3.92 micrometers, and shows features as small as 20 meters (66 feet) across. The region covered is just over 10 kilometers (6.2 miles) wide at its narrowest point, and is one of several dozen that CRISM has taken to search for exposed layering in the chasma walls. Valles Marineris is a large canyon system that extends more than 4,000 kilometers (2,485 miles) covering nearly one-fifth of the planet's circumference. If it were located on Earth, Valles Marineris would stretch from the California coast to New England and hold a volume of water approximately equal to that held by the Mediterranean Sea. One of several chasmata that comprise Valles Marineris, Capri Chasma is located toward the eastern end of the larger system. The upper left panel in the montage above reveals the location of the CRISM image on a mosaic taken by the Mars Odyssey spacecraft's Thermal Emission Imaging System (THEMIS). The CRISM data are centered on a resistant spur of material roughly 4 kilometers (2.5 miles) long, located below a crater whose floor was eroded away by the chasma's rim. The upper right panel reveals this spur in infrared false color. Bright streaks emanating downward from the ridge indicate mass wasting of the lighter material that caps the spur. The lower two images are renderings of data draped over topography without vertical exaggeration. These images provide a view of the spur's elevation relative to the surrounding terrain - the lower right in infrared false color, the lower left in false color to reveal mineral content. The predominantly blue color of the lower left image shows that the chasma wall rock is rich in pyroxene, a major constituent of basaltic rocks. The reds and greens in the resistant material that comprises the ridge indicate the presence of olivine and clay-like minerals called phyllosilicates. Broad swaths of red, yellow and green indicate mass wasting of this resistant material down the slope of the spur. Occurrence of phyllosilicate in the deep-seated wall rock provides evidence for a very ancient wet environment. CRISM is one of six science instruments on NASA's Mars Reconnaissance Orbiter. Led by The Johns Hopkins University Applied Physics Laboratory, Laurel, Md., the CRISM team includes expertise from universities, government agencies and small businesses in the United States and abroad. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter and the Mars Science Laboratory for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, built the orbiter.Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-23
..., and Roof Panel Systems, 119 New Pneumatic Tires for Vehicles other than passenger Cars, 124...-0040, Notice 1] Notice of Receipt of Petition for Decision That Nonconforming Left-Hand Drive 2006 Land Rover Range Rover Multi-Purpose Passenger Vehicles Manufactured Prior to September 1, 2006 Are Eligible...
2014-04-22
Miles O'Brien, science correspondant for PBS NewsHour, left, leads a panel discussion on Mars exploration with William Gerstenmaier, NASA Associatate Administrator for Human Explorations and Operations, center, and Michael Gazarik, NASA Associate Administrator for Space Technology, left, at the Humans to Mars Summit on April 22, 2014 at George Washington University in Washington, DC. Photo Credit: (NASA/Joel Kowsky)
Boutsen, Frank A; Dvorak, Justin D; Pulusu, Vinay K; Ross, Elliott D
2017-04-01
Depending on a subject's attentional bias, robust changes in emotional perception occur when facial blends (different emotions expressed on upper/lower face) are presented tachistoscopically. If no instructions are given, subjects overwhelmingly identify the lower facial expression when blends are presented to either visual field. If asked to attend to the upper face, subjects overwhelmingly identify the upper facial expression in the left visual field but remain slightly biased to the lower facial expression in the right visual field. The current investigation sought to determine whether differences in initial saccadic targets could help explain the perceptual biases described above. Ten subjects were presented with full and blend facial expressions under different attentional conditions. No saccadic differences were found for left versus right visual field presentations or for full facial versus blend stimuli. When asked to identify the presented emotion, saccades were directed to the lower face. When asked to attend to the upper face, saccades were directed to the upper face. When asked to attend to the upper face and try to identify the emotion, saccades were directed to the upper face but to a lesser degree. Thus, saccadic behavior supports the concept that there are cognitive-attentional pre-attunements when subjects visually process facial expressions. However, these pre-attunements do not fully explain the perceptual superiority of the left visual field for identifying the upper facial expression when facial blends are presented tachistoscopically. Hence other perceptual factors must be in play, such as the phenomenon of virtual scanning. Published by Elsevier Ltd.
NASA Technical Reports Server (NTRS)
Mcquilkin, F. T.
1979-01-01
Eighteen design concepts for a LFC wing cover, using various SPF/DB approaches, were developed. After evaluation of producibility, compatibility with LFC requirements, structural efficiency and fatigue requirements, three candidates were selected for fabrication of demonstration panels. Included were both sandwich and stiffened semi-sandwich panels with slotted and perforated surfaces. Subsequent to the evaluation of the three demonstration panels, one concept was selected for fabrication of a 0.3 x 1.0 meter (12 x 42 inch) feasibility panel. It was a stiffened, semi-sandwich panel with a slotted surface, designed to meet the requirements of the upper wing cover at the maximum wing bending moment of the baseline configuration.
Qi, Fei; Tian, Qing; Chen, Liang'an; Li, Chunyan; Zhang, Shu; Liu, Xingchen; Xiao, Binbin
2017-07-01
Backgorund and Aims: Unidirectional endobronchial valves have recently been shown to be beneficial as treatment for persistent air leaks. This report presents a first case of endobronchial valve implantation to treat relapsing pneumothorax in a Chinese patient, and also presents a review of the literature on the use of one-way valve insertion for the treatment of persistent air leaks. The patient did undergo a recent but failed chest tube intervention. By bronchoscopy and using Chartis® system measurements, the upper left lobe (including the left apical bronchus) was closed using a catheter. After the expected decrease in airflow following bronchial occlusion, increased air pressure and decreased spilled air were noted; it was concluded that the pneumothorax was located in the left upper lobe. A Zephyr ® endobronchial valve was placed in the left upper apical bronchus. The health benefits of the procedure were noticed in the following days. Our review suggests that the use of endobronchial valves could be used as an effective, minimally invasive, low-risk intervention for patients with pneumothorax that cannot be treated surgically. © 2015 John Wiley & Sons Ltd.
1. IRONWOOD BLUFFS BRIDGE Tombigbee R. MISSISSIPPI, ITAWAMBA CO. One ...
1. IRONWOOD BLUFFS BRIDGE Tombigbee R. MISSISSIPPI, ITAWAMBA CO. One mile W of Ms. 25 on dirt road 2.5 mi. N of Bull Mtn. Cr. Detail of upper panel point, showing components of members. Sarcone Photography, Columbus, Ms. September 1978. - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS
Sabry, M A; al-Saleh, Q; al-Saw'an, R; al-Awadi, S A; Farag, T I
1995-01-01
A Somali female baby with right upper limb triplication, polythelia, left sided hemihypertrophy, congenital hip dislocation, facial dysmorphism, congenital heart disease, and scoliosis is described. It seems that the above described pattern of anomalies has not been reported before. The possible developmental genetic mechanism responsible for this phenotype is briefly discussed. Images PMID:7562971
Mori, Kazuhiko; Yoshimura, Shuntaro; Yamagata, Yukinori; Aikou, Susumu; Seto, Yasuyuki
2017-06-01
Robotic surgical systems are potentially applicable to transcervical mediastinal lymph dissection for esophageal malignancy. Robot-assisted surgery was performed on a male fresh-frozen human cadaver. Devices for single-port laparoscopic surgery were deployed via one small incision in the left clavicular area. The task for the robot-assisted surgery was the upper mediastinal dissection to the level of the left main bronchus and en bloc harvest of the lymph nodes adherent to the left recurrent laryngeal nerve. An up-angled 30° scope in the 6 o'clock port and two robotic arms from the 3 and 9 o'clock ports worked effectively together. No collisions of the devices inside the cadaveric body or unexpected traumatic events occurred. The robotic surgical system can be used safely for the upper mediastinal dissection. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.
Evaluation of rotator cuff muscle strength in healthy individuals
Cortez, Paulo José Oliveira; Tomazini, José Elias
2015-01-01
OBJECTIVE: To compare the strength generated by the rotator muscles of the shoulder joint between the right upper limb and left upper limb among healthy individuals. METHODS: To evaluate the muscle strength of upper limbs from isometric contractions in the horizontal direction (rotation) an isometric dynamometer was used, equipped with transducers, signal conditioning, a data acquisition board, and finally, a computer. Study participants were 22 male military subjects, aged between 18 and 19 years old, body mass between 57.7 and 93.0 kg (71.8 ± 9.45 kg) and height between 1.67 and 1.90 m (1.75 ± 0.06 m), healthy and without clinical diseases or any type of orthopedic injury in the muscle skeletal system. RESULTS: The internal rotation in the right upper limb (RUL) was higher than the average strength of internal rotation in the left upper limb (LUL) (p = 0.723). The external rotation strength in RUL was lower than the average strength of external rotation in the LUL (p=0.788). No statistical difference was observed by comparing the strength values of all isometric strength tests. CONCLUSION: For the sample and methodology used to assess muscle strength, there was no statistical difference between the strength generated by the muscles of the rotator cuff of the right and left upper limbs. Experimental Study. PMID:26207091
Rupture of the right upper pulmonary vein and left atrium caused by blunt chest trauma.
Osaka, Motoo; Nagai, Ryo; Koishizawa, Tadashi
2017-11-01
A 49-year-old man was transferred to our hospital by ambulance due to blunt chest trauma sustained in a car accident. Echocardiography and enhanced computed tomography showed hemopericardium without other vital organ damage. Emergent surgery was performed under strong suspicion of traumatic cardiac rupture. Careful inspection showed a rupture of the right upper pulmonary vein at the junction of the left atrium, a laceration of the inferior vena cava, and a left-side pericardium rupture, and they were repaired with running 4-0 polypropylene suture. Postoperative hemodynamics were stable. The patient was discharged ambulatory on postoperative day 15.
9. View southeast corner of perimeter acquisition radar power plant ...
9. View southeast corner of perimeter acquisition radar power plant room #214, control room; showing central monitoring station console in foreground. Well and booster control panel in left background and electric power management panel on far right - Stanley R. Mickelsen Safeguard Complex, Perimeter Acquisition Radar Power Plant, In Limited Access Area, Southwest of PARB at end of Service Road B, Nekoma, Cavalier County, ND
Genetics of Eosinophilic Esophagitis
2011-03-01
cellular content (total cells, left panel, and differential cell counts , right panel) in bronchoalveolar lavage fluid (BALF) in IL-21R-/- mice compared...group (30%) had multiple sensitivities to foods and pollens (GM total IgE 285 IU/ ml). Tests for IgE to carbohydrate antigens were negative in all...those with multiple pollen allergies. The frequent occurrence of multiple associated sensitivities to grains, legumes, molds, and pollens suggests that
2014-08-05
Guest attending the National Geographic “Mars Up Close” panel discussion, look at full scale models of the Spirit/Opportunity, left, and Curiosity, Mars rovers, Tuesday, August 5, 2014, at the National Geographic Society headquarters in Washington. Guest listened to a panel of distinguished space scientists and Mars experts involved in current Mars exploration that shared what we’ve learned from Curiosity and the other Mars rovers. Photo Credit: (NASA/Bill Ingalls)
NASA Technical Reports Server (NTRS)
Wang, John T.; Jegley, Dawn C.; Bush, Harold G.; Hinrichs, Stephen C.
1996-01-01
The analytical and experimental results of an all-composite wing stub box are presented in this report. The wing stub box, which is representative of an inboard portion of a commercial transport high-aspect-ratio wing, was fabricated from stitched graphite-epoxy material with a Resin Film Infusion manufacturing process. The wing stub box was designed and constructed by the McDonnell Douglas Aerospace Company as part of the NASA Advanced Composites Technology program. The test article contained metallic load-introduction structures on the inboard and outboard ends of the graphite-epoxy wing stub box. The root end of the inboard load introduction structure was attached to a vertical reaction structure, and an upward load was applied to the outermost tip of the outboard load introduction structure to induce bending of the wing stub box. A finite element model was created in which the center portion of the wing-stub-box upper cover panel was modeled with a refined mesh. The refined mesh was required to represent properly the geometrically nonlinear structural behavior of the upper cover panel and to predict accurately the strains in the stringer webs of the stiffened upper cover panel. The analytical and experimental results for deflections and strains are in good agreement.
2004-03-10
KENNEDY SPACE CENTER, FLA. - Dan Phillips (left) and Donald Nielen, with United Space Alliance, look at the results of flash thermography on a Reinforced Carbon Carbon panel. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.
NASA Technical Reports Server (NTRS)
Tanzer, H. J.
1982-01-01
The feasibility of fabricating and processing liquid metal heat pipes in a low mass honeycomb sandwich panel configuration for application on the NASA Langley airframe-integrated Scramjet engine was investigated. A variety of honeycomb panel facesheet and core-ribbon wick concepts was evaluated within constraints dictated by existing manufacturing technology and equipment. The chosen design consists of an all-stainless steel structure, sintered screen facesheets, and two types of core-ribbon; a diffusion bonded wire mesh and a foil-screen composite. Cleaning, fluid charging, processing, and process port sealing techniques were established. The liquid metals potassium, sodium and cesium were used as working fluids. Eleven honeycomb panels 15.24 cm X 15.24 cm X 2.94 cm were delivered to NASA Langley for extensive performance testing and evaluation; nine panels were processed as heat pipes, and two panels were left unprocessed.
18. William E. Barrett, Photographer, August 1975. EXPOSED VIEW OF ...
18. William E. Barrett, Photographer, August 1975. EXPOSED VIEW OF LOWER PULLEYS OF LEFT-HAND MILL. LOWER LEFT IS BAND SAW PULLEY. UPPER LEFT IS TENSION WHEEL. LARGE PULLEY ON RIGHT IS DRIVE WHEEL FROM POWER SOURCE. - Meadow River Lumber Company, Highway 60, Rainelle, Greenbrier County, WV
Understanding the Global Distribution of Monsoon Depressions
2013-09-30
1.0 PVU interval) is shown for reference. Top left panel shows the Eulerian rate of change of PV, top right shows the diabatic PV tendency, bottom...left shows the horizontal advective tendency, and bottom right shows the sum of the diabatic and total advective tendencies. The vertical advective tendency is not plotted, but is of similar amplitude to the diabatic tendency.
ERIC Educational Resources Information Center
OECD Publishing, 2015
2015-01-01
In most OECD countries, the large majority of adults had at least an upper secondary qualification in 2013, making the completion of upper secondary education the minimum threshold for successful labour market entry and continued employability or the pursuit of further education. Young people who left school before completing upper secondary…
Dwarf Star Erupts in Giant Flare
NASA Technical Reports Server (NTRS)
2005-01-01
This movie taken by NASA'S Galaxy Evolution Explorer shows one of the largest flares, or star eruptions, ever recorded at ultraviolet wavelengths. The star, called GJ 3685A, just happened to be in the Galaxy Evolution Explorer's field of view while the telescope was busy observing galaxies. As the movie demonstrates, the seemingly serene star suddenly exploded once, then even more intensely a second time, pouring out in total about one million times more energy than a typical flare from our Sun. The second blast of light constituted an increase in brightness by a factor of at least 10,000. Flares are huge explosions of energy stemming from a single location on a star's surface. They are caused by the brief destruction of a star's magnetic fields. Many types of stars experience them, though old, small, rapidly rotating 'red dwarfs' like GJ 3685A tend to flare more frequently and dramatically. These stars, called flare stars, can experience powerful eruptions as often as every few hours. Younger stars, in general, also erupt more often. One of the reasons astronomers study flare stars is to gain a better picture and history of flare events taking place on the Sun. A preliminary analysis of the GJ 3685A flare shows that the mechanisms underlying stellar eruptions may be more complex than previously believed. Evidence for the two most popular flare theories was found. Though this movie has been sped up (the actual flare lasted about 20 minutes), time-resolved data exist for each one-hundredth of a second. These observations were taken at 2 p.m. Pacific time, April 24, 2004. In the still image, the time sequence starts in the upper left panel, continues in the upper right, then moves to the lower left and ends in the lower right. The circular and linear features that appear below and to the right of GJ 3685A during the flare event are detector artifacts caused by the extreme brightness of the flare.Complex Burial and Exhumation of South Polar Cap Pitted Terrain
NASA Technical Reports Server (NTRS)
2000-01-01
This image is illuminated by sunlight from the upper left. The two prominent bright stripes at the left/center of the image are covered with bright frost and thus create the illusion that they are sunlit from the lower left.
The large pits, troughs, and 'swiss cheese' of the south polar residual cap appear to have been formed in the upper 4 or 5 layers of the polar material. Each layer is approximately 2 meters (6.6 feet) thick. Some Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) images of this terrain show examples in which older pitted and eroded layers have been previously buried and are now being exhumed. The example shown here includes two narrow, diagonal slopes that trend from upper left toward lower right at the left/center portion of the frame. Along the bottoms of these slopes are revealed a layer that underlies them in which there are many more pits and troughs than in the upper layer. It is likely in this case that the lower layer formed its pits and troughs before it was covered by the upper layer. This observation suggests that the troughs, pits, and 'swiss cheese' features of the south polar cap are very old and form over long time scales.The picture is located near 84.6oS, 45.1oW, and covers an area 3 km by 5 km (1.9 x 3.1 mi) at a resolution of about 3.8 meters (12 ft) per pixel. The image was taken during southern spring on August 29, 1999.Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.Tunable Composite Metamaterials with Imbedded Coherently Controllable Atomic or Molecular Materials
2010-10-07
using nanoporous alumina templates [G. Sauer, G. Brehm, and S. Schneider, “Highly ordered monocrystalline silver nanowire arrays” J. Appl...using stimulated Raman Scattering into the Stokes modes. Fig. 2: Left panel : A cross-sectional view of a typical unit cell of the plasmonic loop...Right panel : Magnetic response of an isolated loop inclusion illustrating the concentration of the magnetic field inside the loop at resonance, when
ERIC Educational Resources Information Center
Center for Civic Innovation, 2006
2006-01-01
This document provides a transcript of one of three panels held at a Manhattan Institute conference in June 2006. In this panel, the issue of reconnecting a certain segment of disadvantaged men into the workforce is discussed. John McWhorter explains that the Manhattan Institute has been instrumental in forging the reform of welfare legislation,…
Genetics of Eosinophilic Esophagitis
2012-03-01
cells, left panel, and differential cell counts , right panel) in bronchoalveolar lavage fluid (BALF) in IL- 21R-/- mice compared to wild-type (WT). A...positive skin tests. A third group (30%) had multiple sensitivities to foods and pollens (GM total IgE 285 IU/ ml). Tests for IgE to carbohydrate antigens...milk sensitized, and those with multiple pollen allergies. The frequent occurrence of multiple associated sensitivities to grains, legumes, molds, and
73. VIEW OF LAUNCH OPERATOR AND LAUNCH ANAYLST PANELS LOCATED ...
73. VIEW OF LAUNCH OPERATOR AND LAUNCH ANAYLST PANELS LOCATED NEAR CENTER OF SOUTH WALL OF SLC-3E CONTROL ROOM. FROM LEFT TO RIGHT ON WALL IN BACKGROUND: COMMUNICATIONS HEADSET AND FOOT PEDAL IN FORGROUND. ACCIDENT REPORTING EMERGENCY NOTIFICATION SYSTEM TELEPHONE, ATLAS H FUEL COUNTER, AND DIGITAL COUNTDOWN CLOCK. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Operations Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
10. INTERIOR OF KITCHEN/UTILITY AREA SHOWING 1LIGHT THREE PANEL WOOD ...
10. INTERIOR OF KITCHEN/UTILITY AREA SHOWING 1-LIGHT THREE PANEL WOOD OUTSIDE DOOR SOUTH SIDE OF HOUSE, PLUMBING HOOKUPS FOR WASHER BELOW BUILT-IN CABINETS AT PHOTO LEFT, AND PAIRED ARRANGEMENTS OF 4-LIGHT OVER 4-LIGHT, DOUBLE-HUNG, WOOD-FRAMED WINDOWS ON SOUTH AND WEST WALLS. VIEW TO SOUTH. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
2003-09-09
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, Jim Landy (left), NDE specialist with United Space Alliance (USA), prepares to examine a Reinforced Carbon Carbon panel using flash thermography. Helping out, at right, is Dan Phillips, also with USA. Attached to the leading edge of the wing of the orbiters, the gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.
2003-09-09
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, United Space Alliance workers (left to right) Jim Landy, Dan Phillips, Paul Ogletree and Dan Kenna check results of flash thermography on the Reinforced Carbon Carbon panel on the table (foreground). Attached to the leading edge of the wing of the orbiters, the gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.
2003-09-09
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, United Space Alliance workers (left to right) Jim Landy, Paul Ogletree, Dan Kenna and Dan Phillips check results of flash thermography on the Reinforced Carbon Carbon panel on the table (foreground). Attached to the leading edge of the wing of the orbiters, the gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.
Drapery assembly including insulated drapery liner
Cukierski, Gwendolyn
1983-01-01
A drapery assembly is disclosed for covering a framed wall opening, the assembly including drapery panels hung on a horizontal traverse rod, the rod having a pair of master slides and means for displacing the master slides between open and closed positions. A pair of insulating liner panels are positioned behind the drapery, the remote side edges of the liner panels being connected with the side portions of the opening frame, and the adjacent side edges of the liner panels being connected with a pair of vertically arranged center support members adapted for sliding movement longitudinally of a horizontal track member secured to the upper horizontal portion of the opening frame. Pivotally arranged brackets connect the center support members with the master slides of the traverse rod whereby movement of the master slides to effect opening and closing of the drapery panels effects simultaneous opening and closing of the liner panels.
NASA Technical Reports Server (NTRS)
Turner, M. J.; Grande, D. L.
1978-01-01
Based on estimated graphite and boron fiber properties, allowable stresses and strains were established for advanced composite materials. Stiffened panel and conventional sandwich panel concepts were designed and analyzed, using graphite/polyimide and boron/polyimide materials. The conventional sandwich panel was elected as the structural concept for the modified wing structure. Upper and lower surface panels of the arrow wing structure were then redesigned, using high strength graphite/polyimide sandwich panels, retaining the titanium spars and ribs from the prior study. The ATLAS integrated analysis and design system was used for stress analysis and automated resizing of surface panels. Flutter analysis of the hybrid structure showed a significant decrease in flutter speed relative to the titanium wing design. The flutter speed was increased to that of the titanium design by selective increase in laminate thickness and by using graphite fibers with properties intermediate between high strength and high modulus values.
Wind's Marks in "Perseverance Valley" (Enhanced Color)
2017-12-06
This patch of rocky Martian ground on the floor of "Perseverance Valley" on the inner slope of the western rim of Endurance Crater slopes steeply downhill from left to right. Some textures seen here, including striations just above and parallel to the edge of a solar panel at far left, may be due to abrasion by wind-driven sand. Researchers interpret them as possible signs of past winds blowing from right to left, up and out of the crater, which currently hosts sand dunes on its central floor. The view spans about 11.5 feet (3.5 meters) from left to right and is presented in enhanced color to make differences in surface materials easier to see. The Panoramic Camera (Pancam) on NASA's Mars Exploration Rover Opportunity took the component images of this scene during the period Oct. 13 through Oct. 20, 2017, corresponding to sols (Martian days) 4878 through 4884 of the rover's work on Mars. Opportunity entered the upper end of Perseverance Valley in July 2017 for several months of investigating how it formed. The valley is a system of shallow troughs extending about the length of two football fields down the crater rim's steep inner slope. Endurance Crater is about 14 miles (22 kilometers) in diameter. Opportunity has been exploring features on its western rim since 2011, after investigating a series of smaller craters beginning with the one it landed in on Jan. 25, 2004, Universal Time (Jan. 24, PST). The origin of Perseverance Valley is unknown, but some observed features suggest that water might have played a role in the past. Opportunity is descending the steep valley, making observations along the way that could help illuminate the origin of this feature. The bedrock target area in this view is called "La Bajada." The image combines exposures taken through three Pancam filters, centered at wavelengths of 753 nanometers (near-infrared), 535 nanometers (green) and 432 nanometers (violet). https://photojournal.jpl.nasa.gov/catalog/PIA22072
Lake Nasser and Toshka Lakes, Egypt
NASA Technical Reports Server (NTRS)
2002-01-01
Lake Nasser (center) and the Toshka Lakes (center left) glow emerald green and black in this MODIS true-color image acquired March 8, 2002. Located on and near the border of Egypt and Norther Sudan, these lakes are an oasis of water in between the Nubian (lower right) and Libyan Deserts (upper left). Also visible are the Red Sea (in the upper right) and the Nile River (running north from Lake Nasser). Credit: Jacques Descloitres, MODIS Land Rapid Response Team, NASA/GSFC
20. NBS SUIT LAB. TABLE WITH MISCELLANEOUS SUIT PARTS AND ...
20. NBS SUIT LAB. TABLE WITH MISCELLANEOUS SUIT PARTS AND TERRY WEST, A SPACE SUIT ASSEMBLY TECHNICIAN LOGGING SUIT PART DATA. PARTS ON THE TABLE ARE A HARD UPPER TORSO (HUT) (REAR LEFT), FULL HELMET (FRONT LEFT), TWO HELMETS WITHOUT PROTECTIVE VISORS, A PAIR OF GLOVES, AND A BACKPACK WITHOUT VOLUMETRIC COVER (REAR RIGHT). THE BACKPACK ATTACHES TO THE HUT TO MAKE-UP THE UPPER TORSO COMPONENTS OF THE SUIT. - Marshall Space Flight Center, Neutral Buoyancy Simulator Facility, Rideout Road, Huntsville, Madison County, AL
23. VIEW LOOKING UPSTREAM AND TOWARD LEFT ABUTMENT OF DAM. ...
23. VIEW LOOKING UPSTREAM AND TOWARD LEFT ABUTMENT OF DAM. NOTE FORMS FOR LEFT GRAVITY ABUTMENT AT UPPER RIGHT CORNER OF PICTURE. ARCHES 3, 4, 5, AND 7 COMPLETED TO ELEVATION 1795. 5 OR 7.5 FEET BELOW TOP OF PARAPET WALL. November 29, 1938 - Bartlett Dam, Verde River, Phoenix, Maricopa County, AZ
Kim, Byeong-Jo; Lee, Jung-Hoon
2015-01-01
[Purpose] The aim of this study was to evaluate the effects of scapula-upward taping (SUT) in a patient with shoulder pain caused by scapular downward rotation (SDR). [Subject] A 26-year-old male with SDR experienced severe pain in the left shoulder when he lifted his left upper extremity to hold the handle in a bus and during and after push-up exercise. [Methods] The patient underwent SUT for a period of 1 month, 5 times per week, for an average of 9 h/d. [Results] The patient’s radiographs showed that the degree of SDR had decreased; the left shoulder pain also decreased in the resting state and during and after push-up exercise. The manual muscle strength test grades of the upper trapezius, lower trapezius, and serratus anterior had increased. The patient was able to lift the left upper extremity to hold the handle in a bus and perform the push-up exercise without experiencing any pain. [Conclusion] Repeated SUT application may be a beneficial treatment method for alleviating the degree of SDR and shoulder pain in SDR patients. PMID:25729213
Choi, Jung-Hyun; Jung, Min-Ho; Yoo, Kyung-Tae
2016-05-01
[Purpose] The purpose of this study was to identify changes in the activity and fatigue of the splenius capitis and upper trapezius muscles, which are agonists to the muscles supporting the head, under the three postures most frequently adopted while using a smartphone. [Subjects and Methods] The subjects were 15 college students in their 20s. They formed a single group and had to adopt three different postures (maximum bending, middle bending, and neutral). While the 15 subjects maintained the postures, muscle activity and fatigue were measured using surface electromyography. [Results] Comparison of the muscle fatigue caused by each posture showed statistically significant differences for the right splenius capitis, left splenius capitis, and left upper trapezius muscles. In addition, maintaining the maximum bending posture while using a smartphone resulted in higher levels of fatigue in the right splenius capitis, left splenius capitis, and left upper trapezius muscles compared with those for the middle bending posture. [Conclusion] Therefore, this study suggests that individuals should bend their neck slightly when using a smartphone, rather than bending it too much, or keep their neck straight to reduce fatigue of the cervical erector muscles.
NASA Technical Reports Server (NTRS)
Velicki, Alexander; Linton, Kim; Hoffman, Krishna; Thrash, Patrick; Pickell, Robert; Turley, Robert
2015-01-01
NASA and the Boeing Co. have been working together under the Environmentally Responsible Aviation Project to develop stitched unitized structure for reduced weight, reduced fuel burn and reduced pollutants in the next generation of commercial aircraft. The structural concept being evaluated is PRSEUS (Pultruded Rod Stitched Efficient Unitized Structure). In the PRSEUS concept, dry carbon fabric, pultruded carbon rods, and foam are stitched together into large preforms. Then these preforms are infused with an epoxy resin into large panels in an out-of-autoclave process. These panels have stiffeners in the length-wise and width-wise directions but contain no fasteners because all stiffeners are stitched to the panel skin. This document contains a description of the fabrication of panels for use in the 30-foot-long Multi-Bay Box test article to be evaluated at NASA LaRC. The document also describes a panel which explores new PRSEUS concepts for applications beyond the Multi-Bay Box.
Optimization of composite sandwich cover panels subjected to compressive loadings
NASA Technical Reports Server (NTRS)
Cruz, Juan R.
1991-01-01
An analysis and design method is presented for the design of composite sandwich cover panels that includes transverse shear effects and damage tolerance considerations. This method is incorporated into an optimization program called SANDOP (SANDwich OPtimization). SANDOP is used in the present study to design optimized composite sandwich cover panels for transport aircraft wing applications as a demonstration of its capabilities. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to identical constraints. Results indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and plus or minus 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density.
Dissociated language functions: a matter of atypical language lateralization or cerebral plasticity?
Acioly, Marcus Andre; Gharabaghi, Alireza; Zimmermann, Christoph; Erb, Michael; Heckl, Stefan; Tatagiba, Marcos
2014-01-01
The left hemisphere is generally considered to harbor language functions. Atypical cortical language lateralization is mainly demonstrated in left-handed and ambidextrous individuals, whereas dissociated language functions have been reported in association with brain injuries as a part of the reorganization process. We present a thoughtful discussion on the underlying mechanisms of dissociated language functions through an illustrative case of dissociated expressive language. A 31-year-old left-handed woman presented with a recurrent left frontal glioma. Preoperative language functional magnetic resonance imaging (fMRI) panel revealed right-sided dominance for two different language tasks (verbal fluency and visual naming), and the word chain task demonstrated maximal activation in the left hemisphere at the posterior margin of the tumor. The patient was operated on awake to assess language functions intraoperatively. Preoperative fMRI findings were confirmed revealing a task-specific dissociation of expressive language functions. Surgical resection was taken to the functional boundaries. Postoperatively, no language dysfunction occurred. Dissociated language functions are prone to occur in long-standing lesions. Different patterns of dissociation may be encountered due to interindividual particularities and cerebral plasticity. The presented patient is unique by demonstrating new insight into expressive language dissociation, emphasizing the role of a preoperative language fMRI panel and the capability of intraoperative language mapping for identifying special language networks. Georg Thieme Verlag KG Stuttgart · New York.
9. INTERIOR OF LIVING ROOM SHOWING OPEN 6LIGHT FRONT ENTRY ...
9. INTERIOR OF LIVING ROOM SHOWING OPEN 6-LIGHT FRONT ENTRY DOOR, OPEN PANEL DOOR TO BEDROOM NUMBER ONE, AND 6-LIGHT OVER 1-LIGHT SASH WINDOW ON REAR WALL AT PHOTO LEFT CENTER. FIREPLACE ORIGINALLY OCCUPIED SPACE UNDER ROUND HEATER VENT HOLE AT PHOTO LEFT. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
5. DETAIL VIEW OF RADIAN GATE (LEFT, IN RAISED POSITION) ...
5. DETAIL VIEW OF RADIAN GATE (LEFT, IN RAISED POSITION) AND HAND- OPERATED GATE HOISTS (RIGHT), LOOKING WEST - Upper Souris National Wildlife Refuge, Dam 87, Souris River Basin, Foxholm, Surrey (England), ND
Burzotta, Francesco; Brancati, Marta Francesca; Porto, Italo; Saffioti, Silvia; Aurigemma, Cristina; Niccoli, Giampaolo; Leone, Antonio Maria; Coluccia, Valentina; Crea, Filippo; Trani, Carlo
2015-12-01
Transradial approach (TRA), when compared with transfemoral, improves the safety of percutaneous coronary procedures. Arterial axis variants are known to hinder the performance of transradial approach percutaneous coronary procedures. Data on the occurrence of arterial axis variants in the right and left arm arterial axes of individual patients are lacking. From a single-center prospective registry, we selected all patients in whom bilateral upper limb arterial anatomy was assessed based on the performance of left and right radial catheterization obtained during the same or during repeat coronary diagnostic or interventional procedure(s). The occurrence of upper right and left limb arterial axis variants was classified according to the previously described operative ABC classification. A total of 610 patients were identified. An ABC upper limb arterial axis variant was detected in 156 (25.6%) patients. Variants were right-sided only in 65 (11.0%), left-sided only in 40 (6.6%), and bilateral in 46 (7.5%) patients. Thus, arterial axis variants were significantly more common in the right side (P=0.02). Bilateral arterial variants were significantly associated with age, female sex, and valvulopathy. Both A (radial/brachial) and B (axillary/subclavian/innominate) variants exhibited concordance across the 2 sides (odds ratio, 7.2; 95% confidence interval, 4.1-12.7 and 8.0; 95% confidence interval, 2.1-30.9, respectively). The occurrence of an anatomic variant potentially hindering transradial approach coronary diagnostic or interventional procedures is bilateral in <8% of cases and is more common in the right arm. Such information may guide, during the clinical practice, the access selection in the case of repeat procedures or need for additional accesses. © 2015 American Heart Association, Inc.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-07
... fatigue-related skin cracks and corrosion of the skin panel lap joints in the fuselage upper lobe, and... of corrosion, and related investigative and corrective actions. This AD reduces the maximum interval... and correct fatigue cracking and corrosion in the fuselage upper lobe skin lap joints, which could...
Numerical Simulation of Ultra-Fast Pulse Propagation in Two-Photon Absorbing Medium
2011-08-01
physical problems including coherent- and incoherent regimes of optical power limiting, saturation, CEP effects, soliton formation etc. It can be also...coherent- and incoherent regimes of optical power limiting, saturation, CEP effects, electromagnetically induced transparency, soliton formation etc...experimental data ( dark blue); Upper panel - 1PA spectrum; Lower panel - 2PA cross section spectrum. The parameter values used are shown in Table 1. 10
ACOSS Eight (Active Control of Space Structures), Phase 2
1981-09-01
A-2 A-2 Nominal Model - Equipment Section and Solar Panels ....... A-3 A-3 Nominal Model - Upper Support .-uss ...... ............ A-4 A...sensitivity analysis technique ef selecting critical system parameters is applied tc the Diaper tetrahedral truss structure (See Section 4-2...and solar panels are omitted. The precision section is mounted on isolators to inertially r•" I fixed rigid support. The mode frequencies of this
Integrated Magneto-Optical Devices for On-Chip Photonic Systems
2017-09-01
reprints for Governmental purposes notwithstanding any copyright notation herein. The views and conclusions contained herein are those of the authors and...Laboratory (AFRL) and the Defense Advanced Research Agency (DARPA) or the U.S. Government. Report contains color . 14. ABSTRACT The objective of this program...Upper Panel: Top- view Optical Micrograph of the First Generation Fabricated Isolator Device and Lower Panel: Layout of MZI and Ring Resonator
Hanekom, Susan D; Brooks, Dina; Denehy, Linda; Fagevik-Olsén, Monika; Hardcastle, Timothy C; Manie, Shamila; Louw, Quinette
2012-02-06
Postoperative pulmonary complications remain the most significant cause of morbidity following open upper abdominal surgery despite advances in perioperative care. However, due to the poor quality primary research uncertainty surrounding the value of prophylactic physiotherapy intervention in the management of patients following abdominal surgery persists. The Delphi process has been proposed as a pragmatic methodology to guide clinical practice when evidence is equivocal. The objective was to develop a clinical management algorithm for the post operative management of abdominal surgery patients. Eleven draft algorithm statements extracted from the extant literature by the primary research team were verified and rated by scientist clinicians (n=5) in an electronic three round Delphi process. Algorithm statements which reached a priori defined consensus-semi-interquartile range (SIQR)<0.5-were collated into the algorithm. The five panelists allocated to the abdominal surgery Delphi panel were from Australia, Canada, Sweden, and South Africa. The 11 draft algorithm statements were edited and 5 additional statements were formulated. The panel reached consensus on the rating of all statements. Four statements were rated essential. An expert Delphi panel interpreted the equivocal evidence for the physiotherapeutic management of patients following upper abdominal surgery. Through a process of consensus a clinical management algorithm was formulated. This algorithm can now be used by clinicians to guide clinical practice in this population.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Keefe, MaryLouise; Tranquilli, J. Vincent
1998-01-01
We determined migration timing and abundance of juvenile spring chinook salmon from three populations in the Grande Ronde River basin. We estimated 6,716 juvenile chinook salmon left upper rearing areas of the Grande Ronde River from July 1997 to June 1998; approximately 6% of the migrants left in summer, 29% in fall, 2% in winter, and 63% in spring. We estimated 8,763 juvenile chinook salmon left upper rearing areas of Catherine Creek from July 1997 to June 1998; approximately 12% of the migrants left in summer, 37% in fall, 21% in winter, and 29% in spring. We estimated 8,859 juvenilemore » chinook salmon left the Grande Ronde Valley, located below the upper rearing areas in Catherine Creek and the Grande Ronde River, from October 1997 to June 1998; approximately 99% of the migrants left in spring. We estimated 15,738 juvenile chinook salmon left upper rearing areas of the Lostine River from July 1997 to April 1998; approximately 3% of the migrants left in summer, 61% in fall, 2% in winter, and 34% in spring. We estimated 22,754 juvenile spring chinook salmon left the Wallowa Valley, located below the mouth of the Lostine River, from September 1997 to April 1998; approximately 55% of the migrants left in fall, 5% in winter, and 40% in spring. Juvenile chinook salmon PIT-tagged on the upper Grande Ronde River were detected at Lower Granite Dam from 4 April to 26 June 1998, with a median passage date of 1 May. PIT-tagged salmon from Catherine Creek were detected at Lower Granite Dam from 3 April to 26 June 1998, with a median passage date of 8 May. PIT-tagged salmon from the Lostine River were detected at Lower Granite Dam from 31 March through 26 May 1998, with a median passage date of 28 April. Juveniles tagged as they left the upper rearing areas of the Grande Ronde and Lostine rivers in fall and that overwintered in areas downstream were detected in the hydrosystem at a higher rate than fish tagged during winter in the upper rearing areas, indicating a higher overwinter survival in the downstream areas. Fish from Catherine Creek showed no difference in detection rates between the fall and winter tag groups, indicating similar overwinter survival in the upper and lower rearing areas. Chinook salmon parr were generally associated with low velocity habitat types during winter in Catherine Creek, and both winter and summer in the Lostine River. In summer 1997, we PIT-tagged parr on Catherine Creek and the Minam and Imnaha rivers in order to monitor their subsequent migration as smolts through the Snake and Columbia River hydrosystem. We found significant differences among populations in smolt migration timing at Lower Granite Dam in 1998. Fish from Catherine Creek and the Minam and Imnaha rivers were detected in the hydrosystem at rates of 16.4, 20.5, and 28.1%, respectively. In 1998, we estimated parr abundance and the number of parr produced per redd in Catherine Creek and the Lostine River. We estimated that 429 mature, age 1+ male parr and 13,222 immature, age 0+ parr were present in Catherine Creek in August. An average of 29 mature, age 1+ male parr and 287 immature, age 0+ parr were produced from each redd constructed in 1996 and 1997, respectively. We estimated that 75 mature, age 1+ male parr and 40,748 immature, age 0+ parr were present in the Lostine River in August. An average of 3 mature, age 1+ male parr and 832 immature, age 0+ parr were produced from each redd constructed in 1996 and 1997, respectively. For every anadromous female spawner in Catherine Creek and the Lostine River in 1998, there were an estimated 13 and 3 mature male parr, respectively.« less
Filaire, Marc; Nohra, Olivier; Sakka, Laurent; Chadeyras, Jean Baptiste; Da Costa, Valence; Naamee, Adel; Bailly, Patrick; Escande, Georges
2008-06-01
The interatrial septum (IAS) can be dissected to resect pulmonary tumors invading the left atrium. The aim of this study was to describe the dissected structures, and to expose the benefits, the limits, and the embryologic reasons of such dissection. We dissected the IAS of 11 fresh, non-embalmed human hearts. The dissected structures were described and the length and depth of the dissection were measured. A histological study was performed in four other fresh hearts to identify and differentiate between dissectible and non-dissectible structures. The dissection was performed through a fatty tissue located between two muscular walls. The depth limit of the IAS dissection was identified as the limbus of the fossa ovalis and the muscular roof of the atria. The section of the latter doubles the depth of the dissection at the level of the upper pulmonary veins. Mean length of the dissected IAS was 77 mm (55-90). Mean depths of the IAS were 41 mm (35-50) at the level of the left upper pulmonary vein, 27 mm (12-35) between the upper and lower pulmonary veins, and 14 mm (8-20) at the level of the left inferior pulmonary vein The surgical dissection of the IAS is performed through the septum secundum that appears as an infold of the atrial wall. The length of the resectable left atrial cuff reaches a mean of 40 mm at the level of the upper pulmonary vein.
NASA Technical Reports Server (NTRS)
Ko, William L.; Gong, Leslie
2001-01-01
Heat transfer, thermal stresses, and thermal buckling analyses were performed on the unconventional wing structures of a Hyper-X hypersonic flight research vehicle (designated as X-43) subjected to nominal Mach 7 aerodynamic heating. A wing midspan cross section was selected for the heat transfer and thermal stress analyses. Thermal buckling analysis was performed on three regions of the wing skin (lower or upper); 1) a fore wing panel, 2) an aft wing panel, and 3) a unit panel at the middle of the aft wing panel. A fourth thermal buckling analysis was performed on a midspan wing segment. The unit panel region is identified as the potential thermal buckling initiation zone. Therefore, thermal buckling analysis of the Hyper-X wing panels could be reduced to the thermal buckling analysis of that unit panel. "Buckling temperature magnification factors" were established. Structural temperature-time histories are presented. The results show that the concerns of shear failure at wing and spar welded sites, and of thermal buckling of Hyper-X wing panels, may not arise under Mach 7 conditions.
Three Dimensional Aerodynamic Analysis of a High-Lift Transport Configuration
NASA Technical Reports Server (NTRS)
Dodbele, Simha S.
1993-01-01
Two computational methods, a surface panel method and an Euler method employing unstructured grid methodology, were used to analyze a subsonic transport aircraft in cruise and high-lift conditions. The computational results were compared with two separate sets of flight data obtained for the cruise and high-lift configurations. For the cruise configuration, the surface pressures obtained by the panel method and the Euler method agreed fairly well with results from flight test. However, for the high-lift configuration considerable differences were observed when the computational surface pressures were compared with the results from high-lift flight test. On the lower surface of all the elements with the exception of the slat, both the panel and Euler methods predicted pressures which were in good agreement with flight data. On the upper surface of all the elements the panel method predicted slightly higher suction compared to the Euler method. On the upper surface of the slat, pressure coefficients obtained by both the Euler and panel methods did not agree with the results of the flight tests. A sensitivity study of the upward deflection of the slat from the 40 deg. flap setting suggested that the differences in the slat deflection between the computational model and the flight configuration could be one of the sources of this discrepancy. The computation time for the implicit version of the Euler code was about 1/3 the time taken by the explicit version though the implicit code required 3 times the memory taken by the explicit version.
30. Engine controls and valve gear, looking aft on main ...
30. Engine controls and valve gear, looking aft on main (promenade) deck level. Threaded admission valve lift rods (two at immediate left of chronometer) permit adjustment of valve timing in lower and upper admission valves of cylinder (left rod controls lower valve, right rod upper valve). Valve rods are lifted by jaw-like "wipers" during operation. Exhaust valve lift rods and wipers are located to right of chronometer. Crank at extreme right drives valve wiper shaft when engaged to end of eccentric rod, shown under "Crank Indicator" dial. Pair of handles to immediate left of admission valve rods control condenser water valves; handles to right of exhaust valve rods control feedwater flow to boilers from pumps. Gauges indicate boiler pressure (left) and condenser vacuum (right); "Crank Indicator" on wall aids engineer in keeping engine crank off "dead-center" at stop so that engine may be easily restarted. - Steamboat TICONDEROGA, Shelburne Museum Route 7, Shelburne, Chittenden County, VT
Isolated thalamic tuberculoma presenting as ataxic hemiparesis
Sahu, Ritesh; Patil, Tushar B; Kori, Prakash; Shukla, Rakesh
2013-01-01
Lacunar syndrome is a neurodeficit secondary to a deep cerebral lesion, usually because of microatheroma of small arteries. Ataxic hemiparesis (AH) is a lacunar syndrome with unilateral pyramidal weakness and ipsilateral ataxia. Thalamic tuberculoma, as a cause of AH, has not been previously described in the literature. We describe an elderly man who presented with left hemiparesis and ipsilateral ataxia. Clinical examination revealed upper motor neuron left facial paresis and left-sided hemiparesis. The patient had incoordination in left upper and lower limbs. Mantoux test was positive and erythrocyte sedimentation rate was elevated. MRI of brain showed a conglomerated hypointense lesion in the right thalamus with a peripheral hyperintensity on T1-weighted imaging and a hyperintense lesion in T2-weighted imaging with significant perilesional oedema, suggesting a tuberculoma. The patient was treated with antitubercular therapy and was symptomatically better at the 9 months follow-up. PMID:23580686
Loculated pneumothorax due to a rare combination resulting in an interesting chest radiograph.
Isaac, Barney Thomas Jesudason; Samuel, Johnson Thamarathu; Mukherjee, Dipak K; Pittman, Marcus
2017-11-01
A 35 years old man presented with acute onset left sided pleuritic chest pain and shortness of breath. On evaluation, he was found to have an interesting chest radiograph which showed a loculated pneumothorax with collapse of the left upper lobe and lingula but fully expanded left lower lobe. He is a known asthmatic who had allergic broncho pulmonary aspergillosis (ABPA) previously with left upper lobe and lingular collapse secondary to mucous plugging. This resolved on treatment with steroids and itraconazole. An interesting combination of events is proposed to explain the current presentation. CT scan chest and blood tests confirmed this sequence of events. He was appropriately treated resulting in complete clinical and radiological recovery. The events leading to the presentation and the likely physiological background for this interesting chest radiograph are discussed. © 2016 John Wiley & Sons Ltd.
6. Aerial view northwest, State Route 100 bottom left and ...
6. Aerial view northwest, State Route 100 bottom left and center, Winterthur Train Station center left, Winterthur Farms dairy barns upper center , duck pond and reservoir center, State Route 92 center right, and Brandywine Creek State Park bottom right. - Winterthur Farms, Intersection State Routes 92 & 100, Intersection State Routes 92 & 100, Winterthur, New Castle County, DE
An objective assessment of safety to drive in an upper limb cast.
Stevenson, H L; Peterson, N; Talbot, C; Dalal, S; Watts, A C; Trail, I A
2013-03-01
Patients managed with upper limb cast immobilization often seek advice about driving. There is very little published data to assist in decision making, and advice given varies between healthcare professionals. There are no specific guidelines available from the UK Drivers and Vehicles Licensing Agency, police, or insurance companies. Evidence-based guidelines would enable clinicians to standardize the advice given to patients. Six individuals (three male, three female; mean age 36 years, range 27-43 years) were assessed by a mobility occupational therapist and driving standards agency examiner while completing a formal driving test in six different types of upper limb casts (above-elbow, below-elbow neutral, and below-elbow cast incorporating the thumb [Bennett's cast]) on both left and right sides. Of the 36 tests, participants passed 31 tests, suggesting that most people were able to safely drive with upper limb cast immobilization. However, driving in a left above-elbow cast was considered unsafe.
NASA Technical Reports Server (NTRS)
2003-01-01
MGS MOC Release No. MOC2-344, 28 April 2003
This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image mosaic was constructed from data acquired by the MOC red wide angle camera. The large, circular feature in the upper left is Aram Chaos, an ancient impact crater filled with layered sedimentary rock that was later disrupted and eroded to form a blocky, 'chaotic' appearance. To the southeast of Aram Chaos, in the lower right of this picture, is Iani Chaos. The light-toned patches amid the large blocks of Iani Chaos are known from higher-resolution MOC images to be layered, sedimentary rock outcrops. The picture center is near 0.5oN, 20oW. Sunlight illuminates the scene from the left/upper left.DETAIL VIEW OF UPPER TRAM TERMINAL STRUCTURE, LOOKING SOUTH TOWARD ...
DETAIL VIEW OF UPPER TRAM TERMINAL STRUCTURE, LOOKING SOUTH TOWARD THE FRONT OF THE STRUCTURE. THE WHEELS AT THE TOP OF THE TRAM BUCKETS RODE OFF THE STATIONARY CABLES ONTO THE TRACK SUPPORTED BY THE "C" IRONS SUSPENDED FROM THE TOP TIMBERS ON THE LEFT AND RIGHT. THE BUCKET OPENING MECHANISM IS ON THE LEFT, AND PART OF THE CLOSING MECHANISM ON THE RIGHT EDGE OF THE FRAME. THE TWO CABLES AT CENTER ARE THE STATIONARY TRAM CABLES THAT RUN ALONG THE TOP OF THE SUPPORT TOWERS ON WHICH THE WHEELS OF THE TRAM BUCKETS RODE. THEY ARE ANCHORED AT GROUND LEVEL JUST OFF FRAME TO THE LOWER LEFT. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA
An Experimental Investigation of Potential Icing of the Space Shuttle External Tank,
1982-09-01
PEG 4000, a PEG 1000/400 mixture, and PEG 6000. The number corresponds to the molecular weight of the compound. 2 4.65m Foam Inslation Side 8 ob o 4m(l...Level Emiseivity panel (PEG coated) (Uncoated) Emissivity Panel Left Right 1 4.4 -28.8 -31.6 4.7 -12.2 -15.3 2 4.4 -20.2 -22.2 4.7 -12.8 -13.4 3 4.3...constant dry bulb temperature of 60*F. PEG was tested on one half of side A of the panel. A mixture of 450 g of molecular weight 4000 PEG and 400 g of H20
2010-09-05
ORLANDO, Fla. -- During the 2010 Tom Joyner Family Reunion, NASA astronaut Leland Melvin talks to attendees at the Gaylord Palms Convention Center in Orlando, Fla. To encourage student attendees to focus on pursuing careers in science, technology, engineering and mathematics (STEM), NASA featured some of its greatest legends and trailblazers during a panel discussion at the reunion event. Panel members, sitting from left, are Christine Darden, Lew Braxton, Robyn Gordon, Jim Jennings, and space activist and actress Nichelle Nichols. NASA's Education Office sponsored the panel discussion and educational activities as part of the agency's "Summer of Innovation" initiative and the federal "Educate to Innovate" campaign. Photo credit: NASA/Amanda Diller
2. Left side of Zinc Plant, from packless Cooling Tower ...
2. Left side of Zinc Plant, from packless Cooling Tower to midpoint of Cell Room, with majority of Upper Plant in view. View is to the east. - Sullivan Electrolytic Zinc Plant, Government Gulch, Kellogg, Shoshone County, ID
76 FR 81879 - Airworthiness Directives; The Boeing Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-29
... structural repair manual repairs of the upper main sill outer chord of the left and right side main entry door number 1, as applicable; repetitive detailed inspections for cracks in the upper main sill of the... necessary. The original NPRM was prompted by reports of cracks in the main entry door number 1 upper main...
Isolated primary lymphedema tarda of the upper limb.
Shariati, Farzaneh; Ravari, Hasan; Kazemzadeh, Gholamhossein; Sadeghi, Ramin
2013-03-01
Primary lymphedema tarda is considered as a congenital disease with late presentation. Primary lymphedema tarda usually affects lower limbs, and primary lymphedema tarda of the upper limbs usually accompanies lower limb lymphedema. In the current case report, we present an 80-year-old male patient with isolated left upper limb swelling that lymphoscintigraphy imaging proved to be lymphedema.
Cohn, Neil
2013-01-01
Like the sequence of words in written language, comic book page layouts direct images into a deliberate reading sequence. Conventional wisdom would expect that comic panels follow the order of text: left-to-right and down - a "Z-path" - though several layouts can violate this order, such as Gestalt groupings of panels that deny a Z-path of reading. To examine how layouts pressure readers to choose pathways deviating from the Z-path, we presented participants with comic pages empty of content, and asked them to number the panels in the order they would read them. Participants frequently used strategies departing from both the traditional Z-path and Gestalt groupings. These preferences reveal a system of constraints that organizes panels into hierarchic constituents, guiding readers through comic page layouts.
The thoracic paraspinal shadow: normal appearances.
Lien, H H; Kolbenstvedt, A
1982-01-01
The width of the right and left thoracic paraspinal shadows were measured at all levels in 200 presumably normal individuals. The paraspinal shadow could be identified in nearly all cases on the left side and in approximately one-third on the right. The range of variation was greater on the left side than one the right. The left paraspinal shadow was wider at the upper levels and in individuals above 40 years of age.
Predicting Soil Strength with Remote Sensing Data
2010-09-01
292/DCP1.12).....................................................................................................14 Figure 7. Left ( LWD )/Right ( LWD ...Printout) (From LWD Users Guide, 2005) ............15 Figure 8. White Calibration Panel (Pagan...18 Table 4. Trafficability Conditions..................................................................................32 Table 5. Pagan LWD
2012-02-21
Laurie Leshin, dean of the School of Science, Rensselaer Polytechnic Institute, left, Mason Peck, NASA Chief Technologist, 2nd from left, Ron Sega, Vice president and enterprise executive for Energy and the Environment, The Ohio State University and Colorado State University, Michael Donovan, technology consultant, New Services Development, Hewlett-Packard Company, and, Jordan Hansell, chairman and CEO, NetJets Inc., right, participate in the NASA Future Forum panel titled "Importance of Technology, Science and Innovation for our Economic Future" at The Ohio State University on Tuesday, Feb. 21, 2012 in Columbus, Ohio. The NASA Future Forum features panel discussions on the importance of education to our nation's future in space, the benefit of commercialized space technology to our economy and lives here on Earth, and the shifting roles for the public, commercial and international communities in space. Photo Credit: (NASA/Bill Ingalls)
Laterality and Left-sidedness in the Nose, Face, and Body: A New Finding.
Hafezi, Farhad; Javdani, Ali; Naghibzadeh, Bijan; Ashtiani, Abbas Kazemi
2017-12-01
Asymmetry is a common occurrence in bilaterian animals, particularly human beings. Through examination of patients and their photographs during rhinoplasty, we noted wider left-sided nasal and facial features in most patients. This observation led us to hypothesize that this might be consistent to the whole body. We conducted a study in 3 parts to test the question above. First, we analyzed operating notes of 50 rhinoplasty patients to determine the wider side of the upper, middle, and lower thirds of the nose. Second, we analyzed the width of the face and chest wall in 31 patients to discern any correlation between facial and bodily asymmetry. Third, computerized tomographic scans of the thorax and body of 48 patients were studied to measure the width of the hemithorax and hemipelvic bone. (1) Upper vault width was wider on left side (78%). Left middle vault width was wider (88%). The lower lateral cartilage, lateral crura convexity was more prominent on left side (48%), and a wider scroll area was found and trimmed in 21 (left) and 0 (right) cases. The alar base was wider on left side (56%). (2) In the body and face analysis, 64.5% had a wider left-sided face and body. (3) In the computed tomographic scan analysis, same-sided thorax and pelvis asymmetry was seen (85.35%), 33 and 7 of which were left- and right-sided, respectively. We observed generalized asymmetry of the face and body with left-sided predominance.
NASA Technical Reports Server (NTRS)
2004-01-01
KENNEDY SPACE CENTER, FLA. NASA Deputy Administrator Fred Gregory (left) moderates the panel presentation during the One NASA Leader-Led Workshop about the Agencys Transformation and implementation strategies. Seated at right are panel members Lynn Cline, deputy associate administrator for Space Operations, Adm. Craig Steidle, associate administrator for Exploration Systems, and Woodrow Whitlow Jr., Kennedy deputy director. The workshop included senior leadership in the Agency who talked about ongoing Transformation activities and Kennedys role in the Vision for Space Exploration.
The Search for Life Beyond Earth
2014-07-14
John Grunsfeld, Associate Administrator for NASA's Science Mission Directorate, far left, speaks during a panel discussion on the search for life beyond Earth in the James E. Webb Auditorium at NASA Headquarters on Monday, July 14, 2014 in Washington, DC. The panel discussed how NASA's space-based observatories are making new discoveries and how the agency's new telescope, the James Webb Space Telescope, will continue this path of discovery after its schedule launch in 2018. Photo Credit: (NASA/Joel Kowsky)
The Search for Life Beyond Earth
2014-07-14
NASA Chief Scientist Ellen Stofan, far left, introduces members of the panel prior to a discussion of the search for life beyond Earth in the James E. Webb Auditorium at NASA Headquarters on Monday, July 14, 2014 in Washington, DC. The panel discussed how NASA's space-based observatories are making new discoveries and how the agency's new telescope, the James Webb Space Telescope, will continue this path of discovery after its schedule launch in 2018. Photo Credit: (NASA/Joel Kowsky)
A Community Terrain-Following Ocean Modeling System (ROMS)
2015-09-30
funded NOPP project titled: Toward the Development of a Coupled COAMPS-ROMS Ensemble Kalman filter and adjoint with a focus on the Indian Ocean and the...surface temperature and surface salinity daily averages for 31-Jan-2014. Similarly, Figure 3 shows the sea surface height averaged solution for 31-Jan... temperature (upper panel; Celsius) and surface salinity (lower panel) for 31-Jan-2014. The refined solution for the Hudson Canyon grid is overlaid on
Evidence for Recent Liquid Water on Mars: Gullies at 70oS in Polar Pit Walls
NASA Technical Reports Server (NTRS)
2000-01-01
[figure removed for brevity, see original site] Gully landforms proposed to have been caused by geologically-recent seepage and runoff of liquid water on Mars are found in the most unlikely places. They typically occur in areas that are quite cold--well below freezing--all year round. Like the old adage about moss on trees, nearly all of them form on slopes that face away from sunlight. Most of the gullies occur at latitudes between 30o and 70o.The highest latitude at which martian gullies have been found is around 70o-75oS on the walls of pits developed in the south polar pitted plains. If you were at this same latitude on Earth, you would be in Antarctica. This region spends much of the winter--which lasts approximately 6 months on Mars--in darkness and at temperatures cold enough to freeze carbon dioxide (around -130oC or -200oF). Nevertheless, gullies with very sharp, deep, v-shaped channels are seen on the pit walls (above, left).Based upon the locations of the tops of the channels on the slope shown here, the inferred site of liquid seepage is located at a layer in the pit wall about 1/3 of the way down from the top of the MOC image. The channels start wide and taper downslope. The area above the channels is layered and has been eroded by mass movement--dry avalanching of debris--to form a pattern of chutes and ridges on the upper slope of the pit wall. The top layer appears to have many boulders in it (each about the size of a small house), these boulders are left behind on the upper slopes of the pit wall as debris is removed.Centered near 70.7oS, 355.7oW, the MOC image was acquired July 14, 1999, and covers an area approximately 2.8 km (1.7 mi) wide by 2.1 km (1.3 mi) high. Sunlight illuminates the MOC image from the upper left and north is toward the upper left. The context view (right) is from the Viking 2 orbiter and was acquired in 1977. The Viking picture is illuminated from the top/upper left; north is toward the upper right. The small white box in the context frame (upper right corner) shows the location of the high resolution MOC view.Kawagoe, Izumi; Kohchiyama, Tsukasa; Hayashida, Masakazu; Satoh, Daizoh; Suzuki, Kenji; Inada, Eiichi
2016-06-01
A 60-year-old male patient with left hilar lung cancer was scheduled to undergo left pneumonectomy or left sleeve lower lobectomy. Preoperative computer tomographic and bronchoscopic examinations revealed that the bronchus (B1) to the right apical segment (S1) was a tracheal bronchus (TB) originating from the trachea approximately 10 mm above the carina. Because the left main bronchus was to be dissected, a right-sided double-lumen tube (DLT) was selected to completely protect the right lung from spillage of secretions or cancer cells from the left lung. The right-sided DLT was placed so as to fit its lateral opening of the bronchial lumen to normal upper branches (B2, B3), while sacrificing ventilation of S1 with an abnormal branch (B1). However, one-lung ventilation (OLV) of the right lung could not be achieved, since a gas leakage from the opened tracheal lumen occurred, most probably due to intra-lobar micro-airway communications between S1 and S2/S3. The DLT was withdrawn until the blue bronchial cuff occluded the orifice of the TB (B1). Although the upper half of the blue bronchial cuff appeared above the tracheal carina, OLV through the two bronchial lumen openings could be achieved due to a specific, slanted doughnut shape of the blue bronchial cuff and the location of the abnormal branch (B1) approximate to the carina. Left pneumonectomy using successful OLV was completed safely without hypoxemia or hypercapnea. Our experience indicates that management of OLV for patients with a thoracheal bronchus needs special considerations of the exact location of the TB and intra-lobar micro-airway communications, in addition to types of scheduled surgical procedures.
16 CFR 1025.14 - Form and filing of documents.
Code of Federal Regulations, 2010 CFR
2010-01-01
... in size. Print shall not be less than standard elite or 12 point type. Pages shall be fastened in the upper left corner or along the left margin. (3) Documents that fail to comply with this section may be...
26 CFR 301.6335-1 - Sale of seized property.
Code of Federal Regulations, 2010 CFR
2010-04-01
... owner (or to the possessor, in the case of personal property) or left at his usual place of abode or... writing to the owner. Such notice shall be delivered to the owner or left at his usual place of abode or.... The bidder shall indicate in the upper left hand corner of the envelope his name and address and the...
Choi, Jung-Hyun; Jung, Min-Ho; Yoo, Kyung-Tae
2016-01-01
[Purpose] The purpose of this study was to identify changes in the activity and fatigue of the splenius capitis and upper trapezius muscles, which are agonists to the muscles supporting the head, under the three postures most frequently adopted while using a smartphone. [Subjects and Methods] The subjects were 15 college students in their 20s. They formed a single group and had to adopt three different postures (maximum bending, middle bending, and neutral). While the 15 subjects maintained the postures, muscle activity and fatigue were measured using surface electromyography. [Results] Comparison of the muscle fatigue caused by each posture showed statistically significant differences for the right splenius capitis, left splenius capitis, and left upper trapezius muscles. In addition, maintaining the maximum bending posture while using a smartphone resulted in higher levels of fatigue in the right splenius capitis, left splenius capitis, and left upper trapezius muscles compared with those for the middle bending posture. [Conclusion] Therefore, this study suggests that individuals should bend their neck slightly when using a smartphone, rather than bending it too much, or keep their neck straight to reduce fatigue of the cervical erector muscles. PMID:27313393
Closeups of IECM grappled by RMS and positioned above payload bay (PLB)
1982-07-04
STS004-23-119 (27 June-4 July 1982) --- This is a close-up view of the Marshall Space Flight Center-developed Induced Environment Contamination Monitor (IECM), a multi-instrument box designed to check for contaminants in and around the space shuttle orbiter cargo bay which might adversely affect delicate experiments carried aboard. The astronaut crew of Thomas K. Mattingly II and Henry W. Hartsfield Jr. maneuvered the Canadian-built robot arm (called the remote manipulator system) very near their overhead flight deck windows and captured this scene with a 35mm camera. HOLD PICTURE HORIZONTALLY WITH FRAME NUMBER AT TOP CENTER. Cameras for the 11 instruments are pictured as black circles at the bottom of the frame. The access door to the arm and safe plug is located about halfway up the left edge of the box. A cascade injector device is immediately to the right of the plug. The rectangular opening at right center of the monitor is the optical effects module. Mass spectrometer is at upper left. Air sampler bottles are at upper left. The colorful rectangle near upper left of the monitor is the passive array. Not easily seen, but also a part of the instrument, are the cryogenic quartz crystal micro balance and the temperature controlled quartz micro balance. Photo credit: NASA
NASA Technical Reports Server (NTRS)
Nelson, Herbert C; Cunningham, Herbert J
1956-01-01
A Rayleigh type analysis involving chosen modes of the panel as degrees of freedom is used to treat the flutter of a two-dimensional flat panel supported at its leading and trailing edges and subjected to a middle-plane tensile force. The panel has a supersonic stream passing over its upper surface and still air below. The aerodynamic forces due to the supersonic stream are obtained from the theory for linearized two-dimensional unsteady flow and the forces due to the still air are obtained from acoustical theory. In order to study the effect of increasing the number of modes in the analysis, two and then four modes are employed. The modes used are the first four natural modes of the panel in a vacuum with no tensile force acting. The analysis includes these variables: Mach number, structural damping, tensile force, density of the still air, and edge fixity (clamped and pinned). For certain combinations of these variables, stability boundaries are obtained which can be used to determine the panel thickness required to prevent flutter for any panel material and altitude.
Optimization of composite sandwich cover panels subjected to compressive loadings
NASA Technical Reports Server (NTRS)
Cruz, Juan R.
1991-01-01
An analysis and design method is presented for the design of composite sandwich cover panels that include the transverse shear effects and damage tolerance considerations. This method is incorporated into a sandwich optimization computer program entitled SANDOP. As a demonstration of its capabilities, SANDOP is used in the present study to design optimized composite sandwich cover panels for for transport aircraft wing applications. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to satisfy individual constraints. The results also indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and +/- 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density. Thus, core density should be chosen by criteria other than minimum weight (e.g., damage tolerance, ease of manufacture, etc.).
Visitor center museum display, detail of diorama booth with raised ...
Visitor center museum display, detail of diorama booth with raised step; door to electrical door panel at left - Wright Brothers National Memorial Visitor Center, Highway 158, Kill Devil Hills, Dare County, NC
NASA Technical Reports Server (NTRS)
1982-01-01
On middeck port side, Pilot Overmyer, looks down at freefloating object. On his left, attached to port side wall, are a dessert package, a prepackaged meal, control panel ML86B, and water dispenser kit with water gun.
Analysis of isokinetic muscle strength for sports physiotherapy research in Korean ssireum athletes
Noh, Ji-Woong; Park, Byoung-Sun; Kim, Mee-Young; Lee, Lim-Kyu; Yang, Seung-Min; Lee, Won-Deok; Shin, Yong-Sub; Kim, Ju-Hyun; Lee, Jeong-Uk; Kwak, Taek-Yong; Lee, Tae-Hyun; Kim, Ju-Young; Park, Jaehong; Kim, Junghwan
2015-01-01
[Purpose] The purpose of the present study was to elucidate the muscle conditions such as the isokinetic muscle of Korean ssireum athletes. [Subjects and Methods] This study enrolled 25 elite ssireum athletes. We measured body composition and peak torque at an angular speed at 60°/s using an isokinetic muscle strength dynamometer. [Results] The lean body mass of the left upper limb was significantly higher than that of the right upper limb. However, the lean body mass of the left lower limb was significantly lower than that of the right lower limb. The peak torque for left elbow flexion was significantly higher than that for right elbow flexion. Conversely, the peak torque for left elbow extension was significantly lower than that for right elbow extension. Furthermore, the peak torque for the left knee was significantly lower than that for the right knee for both flexion and extension. [Conclusion] The data from this study elucidate in part the muscle conditions of Korean ssireum athletes, which can be used to establish a reference for the scientific study of sports physiotherapy. PMID:26644679
Analysis of isokinetic muscle strength for sports physiotherapy research in Korean ssireum athletes.
Noh, Ji-Woong; Park, Byoung-Sun; Kim, Mee-Young; Lee, Lim-Kyu; Yang, Seung-Min; Lee, Won-Deok; Shin, Yong-Sub; Kim, Ju-Hyun; Lee, Jeong-Uk; Kwak, Taek-Yong; Lee, Tae-Hyun; Kim, Ju-Young; Park, Jaehong; Kim, Junghwan
2015-10-01
[Purpose] The purpose of the present study was to elucidate the muscle conditions such as the isokinetic muscle of Korean ssireum athletes. [Subjects and Methods] This study enrolled 25 elite ssireum athletes. We measured body composition and peak torque at an angular speed at 60°/s using an isokinetic muscle strength dynamometer. [Results] The lean body mass of the left upper limb was significantly higher than that of the right upper limb. However, the lean body mass of the left lower limb was significantly lower than that of the right lower limb. The peak torque for left elbow flexion was significantly higher than that for right elbow flexion. Conversely, the peak torque for left elbow extension was significantly lower than that for right elbow extension. Furthermore, the peak torque for the left knee was significantly lower than that for the right knee for both flexion and extension. [Conclusion] The data from this study elucidate in part the muscle conditions of Korean ssireum athletes, which can be used to establish a reference for the scientific study of sports physiotherapy.
Jovian Temperatures--Highest Resolution
1997-09-24
This image, bottom panel, from NASA Galileo orbiter indicates the forces powering Jovian winds, and differentiates between areas of strongest upwelling and downwelling winds in the upper part of the atmosphere where winds are strong.
Sealed head access area enclosure
Golden, Martin P.; Govi, Aldo R.
1978-01-01
A liquid-metal-cooled fast breeder power reactor is provided with a sealed head access area enclosure disposed above the reactor vessel head consisting of a plurality of prefabricated structural panels including a center panel removably sealed into position with inflatable seals, and outer panels sealed into position with semipermanent sealant joints. The sealant joints are located in the joint between the edge of the panels and the reactor containment structure and include from bottom to top an inverted U-shaped strip, a lower layer of a room temperature vulcanizing material, a separator strip defining a test space therewithin, and an upper layer of a room temperature vulcanizing material. The test space is tapped by a normally plugged passage extending to the top of the enclosure for testing the seal or introducing a buffer gas thereinto.
75 FR 69606 - Airworthiness Directives; Fokker Services B.V. Model F.28 Mark 0070 and 0100 Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-15
... LH (left-hand) MLG downlock actuator. * * * Based on the quantity and location of the ice, it is considered highly likely that the ice had formed between the upper end of the downlock actuator and the upper... departure airport. Ice in this location prevents the actuator from turning freely relative to the upper side...
Koley, Shyamal; Pal Kaur, Satinder
2011-01-01
Purpose The purpose of this study was to estimate the dominant handgrip strength and its correlations with some hand and arm anthropometric variables in 101 randomly selected Indian inter-university female volleyball players aged 18-25 years (mean age 20.52±1.40) from six Indian universities. Methods Three anthropometric variables, i.e. height, weight, BMI, two hand anthropometric variables, viz. right and left hand width and length, four arm anthropometric variables, i.e. upper arm length, lower arm length, upper extremity length, upper arm circumference and dominant right and non-dominant handgrip strength were measured among Indian inter-university female volleyball players by standard anthropometric techniques. Results The findings of the present study indicated that Indian female volleyball players had higher mean values in eleven variables and lesser mean values in two variables than their control counterparts, showing significant differences (P<0.032-0.001) in height (t=2.63), weight (t=8.66), left hand width (t=2.10), left and right hand length (t=9.99 and 10.40 respectively), right upper arm length (t=8.48), right forearm length (t=5.41), dominant (right) and non-dominant (left) handgrip strength (t=9.37 and 6.76 respectively). In female volleyball players, dominant handgrip strength had significantly positive correlations (P=0.01) with all the variables studied. Conclusion It may be concluded that dominant handgrip strength had strong positive correlations with all the variables studied in Indian inter-university female volleyball players. PMID:22375242
2011-08-11
Dr. Robert Braun, NASA Chief Technologist, second from left, makes a point, as panelists Leland Melvin, Assoicate Administrator for NASA Education, left, Dr. Laurie Leshin, NASA Deputy Associate Administrator Exploration Systems Mission Directortorate, and Dr. Waleed Abdalati, NASA Chief Scientist, right, look on during a panel discussion at the NASA Future Forum held at the Riggs Alumni Center on the campus of the University of Maryland, Thursday, Aug. 11, 2011 in College Park, Md. Photo Credit: (NASA/Paul E. Alers)
Earth Observations taken by Expedition 30 crewmember
2012-01-22
ISS030-E-048067 (22 Jan. 2012) --- With hardware from the Earth-orbiting International Space Station appearing in the near foreground, a night time European panorama reveals city lights from Belgium and the Netherlands at bottom center, the British Isles partially obscured by solar array panels at left, the North Sea at left center, and Scandinavia at right center beneath the end effector of the Space Station Remote Manipulator System or Canadarm2.
F-16XL Ship #2 during last flight showing titanium laminar flow glove on left wing
NASA Technical Reports Server (NTRS)
1996-01-01
The perforated titanium overlay mounted on the upper surface of the left wing is clearly evident on this view of NASA 848, a highly modified F-16XL aircraft flown by NASA's Dryden Flight Research Center in the Supersonic Laminar Flow Control (SLFC) research program. The two-seat, single-engine craft, one of only two 'XL' F-16s built, recently concluded the SLFC project with its 45th data collection mission. The project demonstrated that laminar--or smooth--airflow could be achieved over a major portion of a wing at supersonic speeds by use of a suction system. The system drew a small part of the boundary-layer air through millions of tiny laser-drilled holes in the 'glove' fitted to the upper left wing.
NASA Technical Reports Server (NTRS)
2002-01-01
The Hayman fire, situated about 65 kilometers southwest of Denver, Colorado, is the largest fire ever recorded in that state. The amount and distribution of smoke from the Hayman fire and from the Ponil Complex fires south of the New Mexico-Colorado border are portrayed in these views from the Multi-angle Imaging SpectroRadiometer (MISR). The images were captured on June 9, 2002, on the second day of the Hayman fire, when only about 13 percent of the total 137,000 acres eventually consumed had been scorched.The image at top-left was acquired by MISR's most oblique (70-degree) forward-viewing camera, and the view at bottom-left was captured by MISR's 26-degree forward-viewing camera. Both left-hand panels are 'false color' views, utilizing near-infrared, red, and blue spectral bands displayed as red, green and blue respectively. With this spectral combination, highly vegetated areas appear red. At top right is a map of aerosol optical depth. This map utilizes the capability of the oblique view angles to measure the abundance of particles in the atmosphere. Haze distributed across the eastern part of the state is indicated by a large number of green pixels, and areas where no retrieval occurred are shown in dark grey. The more oblique perspective utilized within the top panels enhances the appearance of smoke and reveals the haze. In the lower left-hand panel the view is closer to nadir (downward-looking). Here the smoke plumes appear more compact and the haze across eastern Colorado is not detected. The lower right-hand panel is a stereoscopically derived height field that echoes the compact shape of the smoke plumes in the near-nadir image. Results indicate that the smoke plumes reached altitudes of a few kilometers above the surface terrain, or about the same height as the small clouds that appear orange along the bottom edge to the left of center.Data used in these visualizations were generated as part of operational processing at the Atmospheric Sciences Data Center at NASA Langley Research Center. The images were acquired during Terra orbit 13170 and cover an area of about 400 kilometers x 565 kilometers. They utilize data from blocks 58 to 61 within World Reference System-2 path 32.MISR was built and is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Office of Earth Science, Washington, DC. The Terra satellite is managed by NASA's Goddard Space Flight Center, Greenbelt, MD. JPL is a division of the California Institute of Technology.Images in clinical medicine: Segmental neurofibromatosis.
Ma, Dong-Lai; Hu, Jin
2015-03-05
A 4-year-old girl presented for evaluation of cutaneous nodules that had been present on the left side of her trunk since birth. Physical examination revealed numerous soft, nontender papules and nodules across the left upper abdomen and wrapping around to the back.
32. AERIAL VIEW OF TIETON DAM, UPSTREAM FACE OF DAM ...
32. AERIAL VIEW OF TIETON DAM, UPSTREAM FACE OF DAM (Trashrack-structure for outlet at lower left in reservoir, spillway at upper left. Reservoir nearly empty due to drought.) - Tieton Dam, South & East of State Highway 12, Naches, Yakima County, WA
EARTH-SKY - GEMINI-TITAN (GT)-9A - AREAS OF PERU, CHILE AND BOLIVIA
1966-06-05
S66-38313 (5 June 1966) --- Areas of Peru (upper right), Chile (top center) and Bolivia as seen from the Gemini-9 spacecraft during its 35th revolution of Earth. The large body of water at lower right is Lake Titicaca. The smaller lake at left edge is Lake Poopo. Salar de Uyuni is the large light-colored area at upper left. At the bottom of the picture is the snow-capped Cordillera Real range of the Andes Mountains. The Pacific coastline of Peru and Chile is at upper right. The range running parallel with the coastline is the Cordillera Occidental. The image was taken with a modified 70mm Hasselblad camera, using Eastman Kodak, Ektachrome MS (S.O. 217) color film. Photo credit: NASA
2012-02-20
Pickerington High School student Jordan Elliott, left, and Dayton Regional STEM student Cheyenne Benson participate in the NASA Future Forum Inspiration and Education Panel at The Ohio State University on Monday, Feb. 20, 2012, in Columbus, Ohio. The NASA Future Forum features panel discussions on the importance of education to our nation's future in space, the benefit of commercialized space technology to our economy and lives here on Earth, and the shifting roles for the public, commercial and international communities in space. Photo Credit: (NASA/Bill Ingalls)
2011-06-01
usually walking on the right of on-coming people, and cars discouraged from passing on the right of a car traveling in the same direction. “Usually...forces a loss of detail due to horizontal compression: Valleys or troughs are squeezed into oblivion . To enable valleys to be seen, Figures 20 and 21...Volume. Left Panel: North- bound Traffic. Right Panel: Southbound Traffic. Northbound and Southbound Volume Ranges are Different 5.5 Fractional
2007-05-24
KENNEDY SPACE CENTER, FLA. -- At Astrotech, workers prepare the Dawn spacecraft, at left, for installation of a second set of solar array panels, at right. Together, the panels extend 64.6 feet when fully open. Dawn is scheduled to launch June 30 aboard a Delta II rocket from Launch Complex 17-B at Cape Canaveral Air Force Station. Dawn's mission is to explore two of the asteroid belt's most intriguing and dissimilar occupants: asteroid Vesta and the dwarf planet Ceres. Photo credit: NASA/George Shelton
4. Main Control Switchboard (south end rear), view to the ...
4. Main Control Switchboard (south end rear), view to the north, with item 2 (the load frequency control panel) visible in right foreground, through item 7 (generator Unit 4 control panel) obliquely visible on left side of the photograph. Part of item 1 (the synchronization monitor) is visible behind the phone on right side of photograph. - Washington Water Power Clark Fork River Noxon Rapids Hydroelectric Development, Powerhouse, South bank of Clark Fork River at Noxon Rapids, Noxon, Sanders County, MT
The Search for Life Beyond Earth
2014-07-14
John Grunsfeld, Associate Administrator for NASA's Science Mission Directorate, second from left, answers a question from the audience during a panel discussion on the search for life beyond Earth in the James E. Webb Auditorium at NASA Headquarters on Monday, July 14, 2014 in Washington, DC. The panel discussed how NASA's space-based observatories are making new discoveries and how the agency's new telescope, the James Webb Space Telescope, will continue this path of discovery after its schedule launch in 2018. Photo Credit: (NASA/Joel Kowsky)
The Search for Life Beyond Earth
2014-07-14
John Grunsfeld, Associate Administrator for NASA's Science Mission Directorate, far left, answers a question from the audience during a panel discussion on the search for life beyond Earth in the James E. Webb Auditorium at NASA Headquarters on Monday, July 14, 2014 in Washington, DC. The panel discussed how NASA's space-based observatories are making new discoveries and how the agency's new telescope, the James Webb Space Telescope, will continue this path of discovery after its schedule launch in 2018. Photo Credit: (NASA/Joel Kowsky)
The Search for Life Beyond Earth
2014-07-14
NASA Chief Scientist Ellen Stofan, far left, asks the members of the panel a question during a discussion of the search for life beyond Earth in the James E. Webb Auditorium at NASA Headquarters on Monday, July 14, 2014 in Washington, DC. The panel discussed how NASA's space-based observatories are making new discoveries and how the agency's new telescope, the James Webb Space Telescope, will continue this path of discovery after its schedule launch in 2018. Photo Credit: (NASA/Joel Kowsky)
SECOND FLOOR LOBBY; EAST WALL, UPPER RIGHT (R). Glass plate ...
SECOND FLOOR LOBBY; EAST WALL, UPPER RIGHT (R). Glass plate stereopair number PA-1430-139 LC-HABS-GS05-2L-E-4 (R) 157.4827. Left (printed) - Independence Hall Complex, Independence Hall, 500 Chestnut Street, Philadelphia, Philadelphia County, PA
Navigating Comics: An Empirical and Theoretical Approach to Strategies of Reading Comic Page Layouts
Cohn, Neil
2013-01-01
Like the sequence of words in written language, comic book page layouts direct images into a deliberate reading sequence. Conventional wisdom would expect that comic panels follow the order of text: left-to-right and down – a “Z-path” – though several layouts can violate this order, such as Gestalt groupings of panels that deny a Z-path of reading. To examine how layouts pressure readers to choose pathways deviating from the Z-path, we presented participants with comic pages empty of content, and asked them to number the panels in the order they would read them. Participants frequently used strategies departing from both the traditional Z-path and Gestalt groupings. These preferences reveal a system of constraints that organizes panels into hierarchic constituents, guiding readers through comic page layouts. PMID:23616776
NASA Technical Reports Server (NTRS)
Stone, R. H.
1979-01-01
Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after five years' service. There are six Kevlar-49 panels on each aircraft: a left-hand and right-hand set of a wing-body sandwich fairing; a solid laminate under-wing fillet panel; and a 150 C (300 F) service aft engine fairing. The fairings have accumulated a total of 40,534 hours, with one ship set having 16,091 hours service as of Feb. 11, 1979. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings.
Solar panels for the International Space Station are uncrated and moved in the SSPF
NASA Technical Reports Server (NTRS)
1998-01-01
In the Space Station Processing Facility, a worker (left) guides the lifting of solar panels for the International Space Station (ISS). The panels are the first set of U.S.-provided solar arrays and batteries for ISS, scheduled to be part of mission STS-97 in December 1999. The mission, fifth in the U.S. flights for construction of ISS, will build and enhance the capabilities of the Space Station. It will deliver the solar panels as well as radiators to provide cooling. The Shuttle will spend 5 days docked to the station, which at that time will be staffed by the first station crew. Two space walks will be conducted to complete assembly operations while the arrays are attached and unfurled. A communications system for voice and telemetry also will be installed.
Non-Invasive Methods of Cardiovascular Exploration in Aerospace Medicine.
1983-12-01
inferior vena cava Aorta right atrium filling chamber of right ventricle. Trunk of pulmonary art cry Posterior border: almost vertical AP lower arch left ... left ventricle. Inferior Vena cava infundihbulum L Upper border aortic arch Lower border superimposed borders of the RV LV right and left ventricles...iliac aneurisms is possible. isotopic phlebography is useful in the investigation of the permeability of the inferior vena cava
Cho, Ah-Reum; Kwon, Jae-Young; Kim, Choongrak; Hong, Jung-Min; Kang, Christine
2017-04-01
Near-infrared spectroscopy sensors often cannot be attached at the commercially recommended locations because combined use of neurological monitoring systems is common during on-pump cardiac surgery. The primary purpose of this study was to compare the incidence of regional cerebral oxygen desaturation and regional cerebral oxygen saturation values detected using near-infrared spectroscopy between the upper and lower forehead during on-pump cardiac surgery. A prospective observational study was conducted with 25 adult patients scheduled for elective on-pump cardiac surgery. Regional cerebral oxygen saturations at the left upper and lower forehead and other clinical measurements were monitored intraoperatively. McNemar's test was used to analyze differences in the incidence of cerebral regional oxygen desaturation between the left upper and lower forehead. Two-way repeated measures ANOVA with post hoc Bonferroni correction was used to compare the regional cerebral oxygen saturation at each time point. There was a significantly higher incidence of regional cerebral oxygen desaturation at the upper than lower forehead only at 1 h after initiation of aortic cross-clamping. There were significant differences between the left upper and lower regional cerebral oxygen saturation values throughout the observation period. Regional cerebral oxygen saturation was significantly lower at the upper than lower forehead during on-pump cardiac surgery. However, disagreements in detection of cerebral regional oxygen desaturation were only significant at 1 h after initiation of aortic cross-clamping. WHO-ICTRP, Clinical Research Information Service (CRiS). ID: KCT0000971. URL: https://cris.nih.go.kr/cris/search/search_result_st01_en.jsp?seq=3678&type=my .
5. POWERHOUSE, PELTONFRANCIS TURBINES (GENERATORS) UNITS NOS. 1 AND 2 ...
5. POWERHOUSE, PELTON-FRANCIS TURBINES (GENERATORS) UNITS NOS. 1 AND 2 WITH REGULATOR PANEL AT LEFT AND GATE VALVE IN CENTER FOREGROUND - Yosemite Hydroelectric Power Plant, Highways 120 & 140, Yosemite Village, Mariposa County, CA
TARA MARSHALL AND MIKE NICHOLS AT TEST STAND 4693
2016-12-14
TARA MARSHALL, LEFT, A MARSHALL ENGINEER, TALKS ABOUT THE INSTALLATION OF A PRESSURIZATION CONTROL PANEL AT TEST STAND 4693 WITH MIKE NICHOLS, LEAD TEST ENGINEER FOR THE SPACE LAUNCH SYSTEM LIQUID HYDROGEN TANK STRUCTURAL TEST ARTICLE.
From Universal Access to Universal Proficiency.
ERIC Educational Resources Information Center
Lewis, Anne C.
2003-01-01
Panel of five education experts--Elliot Eisner, John Goodlad, Patricia Graham, Phillip Schlechty, and Warren Simons--answer questions related to recent school reform efforts, such as the No Child Left Behind Act, aimed at achieving universal educational proficiency. (PKP)
On-demand stereoscopic 3D displays for avionic and military applications
NASA Astrophysics Data System (ADS)
Sarma, Kalluri; Lu, Kanghua; Larson, Brent; Schmidt, John; Cupero, Frank
2010-04-01
High speed AM LCD flat panels are evaluated for use in Field Sequential Stereoscopic (FSS) 3D displays for military and avionic applications. A 120 Hz AM LCD is used in field-sequential mode for constructing eyewear-based as well as autostereoscopic 3D display demonstrators for test and evaluation. The COTS eyewear-based system uses shutter glasses to control left-eye/right-eye images. The autostereoscopic system uses a custom backlight to generate illuminating pupils for left and right eyes. It is driven in synchronization with the images on the LCD. Both displays provide 3D effect in full-color and full-resolution in the AM LCD flat panel. We have realized luminance greater than 200 fL in 3D mode with the autostereoscopic system for sunlight readability. The characterization results and performance attributes of both systems are described.
NASA Technical Reports Server (NTRS)
2004-01-01
15 May 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows the results of a small landslide off of a hillslope in the Aureum Chaos region of Mars. Mass movement occurred from right (the slope) to left (the lobate feature pointed left). Small dark dots in the landslide area are large boulders. This feature is located near 2.6oS, 24.5oW. This picture covers an area approximately 3 km (1.9 mi) across and is illuminated by sunlight from the left/upper left.5. VIEW LOOKING DOWN ON TOP OF ELEVATOR CAR FROM ...
5. VIEW LOOKING DOWN ON TOP OF ELEVATOR CAR FROM THIRD FLOOR, SHOWING CROSSHEAD AND BROKEN ROPE SAFETY STOP MECHANISM INSIDE; GUIDES AT LOWER LEFT AND UPPER RIGHT; OPERATING ROPE AT LEFT - 72 Marlborough Street, Residential Hydraulic Elevator, Boston, Suffolk County, MA
Earth observations taken during STS-77 mission
1996-06-12
STS077-162-036 (19-29 May 1996) --- An oblique view of eastern New York State, Lake Ontario and the Saint Lawrence River. This view of New York State looking northeast was provided by the crew members of the mission. The Linhof camera, a 4x5 format instrument, provides a wide panorama of the region. If the picture is oriented with the NASA logo to the left bottom corner, North will be to the upper side of the frame. Lake Ontario is in the upper left corner and the Catskills are in the lower portion of the scene. The Finger Lakes from Cayuga to Oneida are in the left-center. One of the remarkable aspects of this photograph is this part of New York only averages 68 cloud free days per year. According to scientists studying the photo collection, the entire area of this photograph was covered by glaciers during the ice ages. The glaciers left their marks in the creation of the Finger Lakes and the formation of Lake Ontario.
Kawagoe, Izumi; Hayashida, Masakazu; Suzuki, Kenji; Kitamura, Yoshitaka; Oh, Shiaki; Satoh, Daizoh; Inada, Eiichi
2016-08-01
To investigate anesthesia management in patients undergoing right lung surgery after a previous left upper lobectomy (LUL) that may require special precautions since angulation of the left bronchus can hamper correct placement of a left-sided double-lumen tube (DLT), and one-lung ventilation (OLV) depending solely on the left lower lobe may lead to inadequate oxygenation. A retrospective data analysis. Single university hospital. Patients underwent right lung surgery after previous LUL. None. Anesthesia management was investigated in 18 patients who underwent right lung surgery following LUL. All intubation procedures were performed under bronchoscopic guidance to prevent airway trauma. OLV could be achieved with a left-sided DLT in 12 patients, while tubes other than this were required in 6 patients, including a right-sided DLT (n = 3) and a bronchial blocker (n = 3). The presence or absence of remarkable bronchial angulation, characterized by a combination of a wide (>140°) angle between the trachea and left main bronchus and a narrow (<100°) angle between the left main and lower bronchi critically affected tube selections. The minimum SpO2 during OLV was 90.9±4.1%. In 2 patients, intermittent bilateral ventilation was required to treat desaturation. In all the patients, the scheduled surgery could be completed. Extent of left bronchial angulations had a critical impact on whether or not a left-sided DLT could be used in patients undergoing right lung surgery after LUL. Copyright © 2016 Elsevier Inc. All rights reserved.
Legras, Antoine; Azarine, Arshid; Poitier, Bastien; Messas, Emmanuel; Le Pimpec-Barthes, Françoise
2017-08-01
Postoperative systemic artery to pulmonary vein fistula is very rare. In this report, we describe an exceptional condition of both intrapulmonary arteriovenous fistula and systemic artery to pulmonary vein fistula, involving all right hemithoracic systemic arteries, inducing left-to-left shunt. This condition was responsible for heart failure, 24 years after a right upper lobectomy for inflammatory tumor. Investigations included computed tomographic angiography, arteriography, and four-dimensional flow magnetic resonance imaging. Differential diagnosis and management are discussed. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.
Earth Observations taken by Expedition 30 crewmember
2012-01-30
ISS030-E-060478 (30 Jan. 2012) --- The city lights of Madrid (just right of center) stand out in this photograph from the International Space Station. Recorded by one of the Expedition 30 crew members, the view shows almost the entire Iberian Peninsula (both Spain and Portugal) with the Strait of Gibraltar and Morocco appearing at lower left. What is thought to be a blur of the moon appears in upper left corner. The faint gold or brownish line of airglow?caused by ultraviolet radiation exciting the gas molecules in the upper atmosphere?parallels the horizon or Earth limb.
2003-05-10
These images, from David Weitz’s liquid crystal research, show ordered uniform sized droplets (upper left) before they are dried from their solution. After the droplets are dried (upper right), they are viewed with crossed polarizers that show the deformation caused by drying, a process that orients the bipolar structure of the liquid crystal within the droplets. When an electric field is applied to the dried droplets (lower left), and then increased (lower right), the liquid crystal within the droplets switches its alignment, thereby reducing the amount of light that can be scattered by the droplets when a beam is shone through them.
25. VIEW OF MILL FROM UPPER TAILINGS POND. SHOWS ROASTER ...
25. VIEW OF MILL FROM UPPER TAILINGS POND. SHOWS ROASTER ON LEFT EDGE OF VIEW. THE SECONDARY THICKENER No. 7 IS OFF VIEW TO THE RIGHT. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD
Lenzi, R; Marceliano-Alves, M F; Alves, Frf; Pires, F R; Fidel, S
2017-06-01
Radiolucent or hypodense lesions in the crown of unerupted teeth may be due to pre-eruptive intracoronal resorption. Clinicians must be aware of this risk so that they can diagnose and appropriately treat this condition. The purpose of this study is to present a well-documented clinical case of pre-eruptive intracoronal resorption in an impacted third upper left molar of a 63 year old female patient. This was an unexpected finding, which occurred after cone-beam computed tomography was used to investigate the first upper left molar, which had an acute periradicular abscess. A multidisciplinary team followed up the case to describe clinical, radiographic and histological findings. The available treatment options were discussed, and the tooth extraction was the option chosen. Previous case studies describing such resorption in third upper molars have not been reported. This case shows that all permanent teeth in a pre-eruptive stage must be analysed radiographically to detect early pre-eruptive intracoronal resorption. © 2016 Australian Dental Association.
Solar panels for the International Space Station are uncrated and moved in the SSPF
NASA Technical Reports Server (NTRS)
1998-01-01
In the Space Station Processing Facility, the overhead crane slowly moves solar panels intended for the International Space Station (ISS). The panels are the first set of U.S.-provided solar arrays and batteries for ISS, scheduled to be part of mission STS-97 in December 1999. The mission, fifth in the U.S. flights for construction of ISS, will build and enhance the capabilities of the Space Station. It will deliver the solar panels as well as radiators to provide cooling. The Shuttle will spend 5 days docked to the station, which at that time will be staffed by the first station crew. Two space walks will be conducted to complete assembly operations while the arrays are attached and unfurled. A communications system for voice and telemetry also will be installed. At the left of the crane and panels is the Multipurpose Logistics Module (MPLM), the Leonardo A reusable logistics carrier, the MPLM is scheduled to be launched on Space Shuttle Mission STS-100, targeted for April 2000.
Extended Endoscopic Endonasal Approach for Craniopharyngioma Removal.
Messerer, Mahmoud; Maduri, Rodolfo; Daniel, Roy Thomas
2018-02-01
Objective Endoscopic transsphenoidal extended endoscopic approach (EEA) represents a valid alternative to microsurgery for craniopharyngiomas removal, especially for retrochiasmatic lesions without large parasellar extension. The present video illustrates the salient surgical steps of the EEA for craniopahryngioma removal. Patient A 52-year-old man presented with a bitemporal hemianopia and a bilateral decreased visual acuity. MRI showed a Kassam type III cystic craniopharyngioma with a solid component ( Fig. 1 , panels A and B). Surgical Procedure The head is rotated 10 degrees toward the surgeons. The nasal step is started through the left nostril with a middle turbinectomy. A nasoseptal flap is harvested and positioned in the left choana. The binostril approach allows a large sphenoidotomy to expose the key anatomic landmarks. The craniotomy boundaries are the planum sphenoidale superiorly, the median opticocarotid recesses, the internal carotid artery laterally and the clival recess inferiorly. After dural opening and superior intercavernous sinus coagulation, the tumor is entirely removed ( Fig. 2 , panels A and B). Skull base reconstruction is ensured by fascia lata grafting and nasoseptal flap positioning. Results Postoperative MRI showed the complete tumor resection ( Fig. 1 , panels C and D). At 3 months postoperatively, the bitemporal hemianopia regressed and the visual acuity improved. A novel left homonymous hemianopia developed secondary to optic tract manipulation. Conclusions The extended EEA is a valid surgical approach for craniopharyngioma resection. A comprehensive knowledge of the sellar and parasellar anatomy is mandatory for safe tumor removal with decreased morbidity and satisfactory oncologic results. The link to the video can be found at: https://youtu.be/NrCPPnVK2qA .
Upper Limb Asymmetry in the Sense of Effort Is Dependent on Force Level
Mitchell, Mark; Martin, Bernard J.; Adamo, Diane E.
2017-01-01
Previous studies have shown that asymmetries in upper limb sensorimotor function are dependent on the source of sensory and motor information, hand preference and differences in hand strength. Further, the utilization of sensory and motor information and the mode of control of force may differ between the right hand/left hemisphere and left hand/right hemisphere systems. To more clearly understand the unique contribution of hand strength and intrinsic differences to the control of grasp force, we investigated hand/hemisphere differences when the source of force information was encoded at two different force levels corresponding to a 20 and 70% maximum voluntary contraction or the right and left hand of each participant. Eleven, adult males who demonstrated a stronger right than left maximum grasp force were requested to match a right or left hand 20 or 70% maximal voluntary contraction reference force with the opposite hand. During the matching task, visual feedback corresponding to the production of the reference force was available and then removed when the contralateral hand performed the match. The matching relative force error was significantly different between hands for the 70% MVC reference force but not for the 20% MVC reference force. Directional asymmetries, quantified as the matching force constant error, showed right hand overshoots and left undershoots were force dependent and primarily due to greater undershoots when matching with the left hand the right hand reference force. Findings further suggest that the interaction between internal sources of information, such as efferent copy and proprioception, as well as hand strength differences appear to be hand/hemisphere system dependent. Investigations of force matching tasks under conditions whereby force level is varied and visual feedback of the reference force is available provides critical baseline information for building effective interventions for asymmetric (stroke-related, Parkinson’s Disease) and symmetric (Amyotrophic Lateral Sclerosis) upper limb recovery of neurological conditions where the various sources of sensory – motor information have been significantly altered by the disease process. PMID:28491047
Upper Limb Asymmetry in the Sense of Effort Is Dependent on Force Level.
Mitchell, Mark; Martin, Bernard J; Adamo, Diane E
2017-01-01
Previous studies have shown that asymmetries in upper limb sensorimotor function are dependent on the source of sensory and motor information, hand preference and differences in hand strength. Further, the utilization of sensory and motor information and the mode of control of force may differ between the right hand/left hemisphere and left hand/right hemisphere systems. To more clearly understand the unique contribution of hand strength and intrinsic differences to the control of grasp force, we investigated hand/hemisphere differences when the source of force information was encoded at two different force levels corresponding to a 20 and 70% maximum voluntary contraction or the right and left hand of each participant. Eleven, adult males who demonstrated a stronger right than left maximum grasp force were requested to match a right or left hand 20 or 70% maximal voluntary contraction reference force with the opposite hand. During the matching task, visual feedback corresponding to the production of the reference force was available and then removed when the contralateral hand performed the match. The matching relative force error was significantly different between hands for the 70% MVC reference force but not for the 20% MVC reference force. Directional asymmetries, quantified as the matching force constant error, showed right hand overshoots and left undershoots were force dependent and primarily due to greater undershoots when matching with the left hand the right hand reference force. Findings further suggest that the interaction between internal sources of information, such as efferent copy and proprioception, as well as hand strength differences appear to be hand/hemisphere system dependent. Investigations of force matching tasks under conditions whereby force level is varied and visual feedback of the reference force is available provides critical baseline information for building effective interventions for asymmetric (stroke-related, Parkinson's Disease) and symmetric (Amyotrophic Lateral Sclerosis) upper limb recovery of neurological conditions where the various sources of sensory - motor information have been significantly altered by the disease process.
78 FR 17073 - Airworthiness Directives; Bombardier, Inc. Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-20
... of Transportation (DOT). ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive..., and CL-604 Variants) airplanes. This AD was prompted by reports of jamming/malfunctioning of the left-hand engine thrust control mechanism. This AD requires modifying the left-hand engine upper core-cowl...
2009-01-01
and Nutrition Board (2001). Dietary Reference Intakes: A Report of the Panel on Micronutrients , Subcommittees on Upper Reference Levels of Nutrients...Respiratory Infections in Air Force Academy Cadets in Basic Training Summary Background: As a dietary essential, zinc plays a number of important roles...Introduction Zinc is considered one of the essential micronutrients used by the human body. Although zinc fulfills a number of metabolic and
Mittan, Margaret Birmingham [Oakland, CA; Miros, Robert H. J. [Fairfax, CA; Brown, Malcolm P [San Francisco, CA; Stancel, Robert [Loss Altos Hills, CA
2012-06-05
A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.
Brown, Malcolm P.; Mittan, Margaret Birmingham; Miros, Robert H. J.; Stancel, Robert
2013-03-19
A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.
2004-09-30
KENNEDY SPACE CENTER, FLA. - Xenon lights on the ground near the Vehicle Assembly Building bathe the south wall in light, allowing workers on scaffolds (center and upper right near the NASA logo) to cover the holes with corrugated steel so the facility can be returned to performing operational activities. The VAB lost 820 panels from the south wall during Frances, and 25 additional panels during Hurricane Jeanne. The VAB stands 525 feet tall. Central Florida, including Kennedy Space Center, was battered by four hurricanes between Aug. 13 and Sept. 26.
NASA Technical Reports Server (NTRS)
2004-01-01
KENNEDY SPACE CENTER, FLA. Xenon lights on the ground near the Vehicle Assembly Building bathe the south wall in light, allowing workers on scaffolds (center and upper right near the NASA logo) to cover the holes with corrugated steel so the facility can be returned to performing operational activities. The VAB lost 820 panels from the south wall during Frances, and 25 additional panels during Hurricane Jeanne. The VAB stands 525 feet tall. Central Florida, including Kennedy Space Center, was battered by four hurricanes between Aug. 13 and Sept. 26.
Martian Surface as Seen by Phoenix
2008-07-28
This anaglyph was acquired by NASA Phoenix Lander; in the bottom left is a trench dug by Phoenix Robotic Arm. In the bottom right is one of Phoenix two solar panels. You will need 3-D glasses to view this image.
Tracking Solar Energy Conersion Unit Adapted For Field Assembly
Kaminar, Neil R.; Ross, III, James G.; Carrie, Peter J.
2000-02-01
A modular solar energy collector having elongated V-shaped side walls formed by a pair of coplanar panels for each side wall. The upper panels, occupying most of the wall area are diffusely reflective, but the lower panels are specularly reflective. A Fresnel lens, having a snap fit relation to the side walls focuses some light on the lower specularly reflective panels which direct light to the solar cells at the base of the V-shaped walls. A heat sink provides support for the two panels with two opposed, upwardly extending wings terminating in opposed linear clips located near the lengthwise seam of the coplanar panels, each clip holding two coplanar panels in parallel alignment. The clips not only provide support for the panels, but also transfer heat to the remainder of the heat sink. The clips are shaped so that edges of the panels engage each clip by a snap fit, outside of the clip in one embodiment and inside of the clip in another embodiment. End caps are also formed with structures which snap to the wall panels. Since all junctions of components snap together, the collector of the present invention is easily assembled without specialized tools. Using side walls which are only partly specularly reflective permits a large angle of acceptance, yet provides an economical wall design because the entire wall need not be specularly reflective.
Pupca, Gheorghe; Miclăuş, Graţian Dragoslav; Bucuraş, Viorel; Iacob, Nicoleta; Sas, Ioan; Matusz, Petru; Tubbs, R Shane; Loukas, Marios
2014-01-01
Crossed fused renal ectopia (CFRE) is the second most common fusion anomalies (FAs) of the kidneys after horseshoe kidney. Crossed fused renal ectopia (CFRE) results from one kidney crossing over to the opposite side and subsequent fusion of the parenchyma of the two kidneys. We report, by multidetector-row computed tomography (MDCT) angiography, an extremely rare case of a left CFRE (L-shaped kidney type), consisting of multiple renal arteries (one main renal artery for the upper renal parenchyma, and three renal arteries (one main and two additional) for the lower renal parenchyma) and two left renal veins, which produced a double nutcracker syndrome (both anterior and posterior). The L-shaped left kidney has a maximum length of 18.5 cm, a maximum width of 10.2 cm, and a maximum thickness of 5.3 cm. The upper pole of the kidney is located at the level of the lower third of T12 vertebral body (4.6 cm left to the mediosagittal plan); the lower pole is located along the lower half of the L5 vertebral body (1.5 cm left to the mediosagittal plan). The following case will focus on the relevant anatomy, embryology, and the clinical significance of this entity.
Hayashi, Takuji; Yamanaka, Yohei; Kinjo, Takanori; Katayama, Kinzo; Kamoto, Akihito; Mori, Naoki; Yoshioka, Toshiaki
2014-04-01
A 63-year-old man who had undergone radical cystectomy and ileal conduit formation for invasive bladder cancer 3 years before presented with continuous positive urinary cytology in the ileal conduit. His diagnosis was carcinoma in situ (CIS) of the left upper urinary tract. He was treated with Bacillus Calmette-Guérin (BCG) perfusion therapy using a single-J ureteric stent. BCG (80 mg) in 100 ml saline was instilled in a one-hour period weekly for 6 weeks. Usage of another catheter was effective for continuing the therapy. Urinary cytology in the left upper urinary tract and the ileal conduit became negative after the therapy. There was no evidence of recurrence or metastasis of urothelial carcinoma 6 months after the therapy.
24. Pump Room interiordewatering pump motor on upper level. Note ...
24. Pump Room interior-dewatering pump motor on upper level. Note the removable roof hatch (steel frame) directly above motor. Dewatering pumps motor control center at left - Hunters Point Naval Shipyard, Drydock No. 4, East terminus of Palou Avenue, San Francisco, San Francisco County, CA
1. AIR/MANWAY SHAFT WALL AND FAN HOUSE FOUNDATION WALL FROM ...
1. AIR/MANWAY SHAFT WALL AND FAN HOUSE FOUNDATION WALL FROM NORTHWEST. AEROVANE FAN AT UPPER LEFT, SCAFFOLD AND LEPLEY VENTILATOR AT UPPER RIGHT. - Consolidation Coal Company Mine No. 11, Air-Manway Shaft, East side of State Route 936, Midlothian, Allegany County, MD
73. DETAIL OF LIQUID OXYGEN STORAGE PRESSURE GAUGE IN UPPER ...
73. DETAIL OF LIQUID OXYGEN STORAGE PRESSURE GAUGE IN UPPER LEFT CORNER OF WEST SIDE OF CENTER SKID IN CA-133-1-C-69 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
Kim, Yookyung; Myong, Jun-Pyo; Lee, Jeong Kyong; Kim, Jeung Sook; Kim, Yoon Kyung; Jung, Soon-Hee
2015-01-01
This study evaluated the CT characteristics of pleural plaques in asbestos-exposed individuals and compared occupational versus environmental exposure groups. This study enrolled 181 subjects with occupational exposure and 98 with environmental exposure from chrysotile asbestos mines, who had pleural plaques confirmed by a chest CT. The CT scans were analyzed for morphological characteristics, the number and distribution of pleural plaques and combined pulmonary fibrosis. Furthermore, the CT findings were compared between the occupational and environmental exposure groups. Concerning the 279 subjects, the pleural plaques were single in 2.2% and unilateral in 3.6%, and showed variable widths (range, 1-20 mm; mean, 5.4 ± 2.7 mm) and lengths (5-310 mm; 72.6 ± 54.8 mm). The chest wall was the most commonly involved (98.6%), with an upper predominance on the ventral side (upper, 77.8% vs. lower, 55.9%, p < 0.001) and a lower predominance on the dorsal side (upper, 74.9% vs. lower, 91.8%, p = 0.02). Diaphragmatic involvement (78.1%) showed a right-side predominance (right, 73.8% vs. left, 55.6%, p < 0.001), whereas mediastinal plaques (42.7%) were more frequent on the left (right, 17.6% vs. left, 39.4%, p < 0.001). The extent and maximum length of plaques, and presence and severity of combined asbestosis, were significantly higher in the occupational exposure group (p < 0.05). Pleural plaques in asbestos-exposed individuals are variable in number and size; and show a predominant distribution in the upper ventral and lower dorsal chest walls, right diaphragm, and left mediastinum. Asbestos mine workers have a higher extent of plaques and pulmonary fibrosis versus environmentally exposed individuals.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jiang, Sen, E-mail: jasfly77@vip.163.com; Sun, Xi-Wen, E-mail: xwsun@citiz.net; Yu, Dong, E-mail: yudong_mail@126.com
2013-05-15
PurposeOur experience with endovascular embolization (EVE) of the bronchial artery (BA) originating from the upper portion of the aortic arch (AA) in six patients is described.MethodsAltogether, 818 patients with hemoptysis underwent multidetector row computed tomography angiography (MDCTA) before EVE or AA angiography during EVE. Aberrant BAs originating from the upper portion of the AA were the source of massive hemoptysis in six patients (0.73 %). MDCT angiograms and/or Digital subtraction angiograms were retrospectively reviewed. Selective catheterization and embolization were performed.ResultsThe ostia of the BAs were located on the superior surface of the AA between the brachiocephalic trunk and left common carotidmore » artery in three patients, the junction of the aorta and medial surface of the left subclavian artery in two, and the posterior wall of the upper portion of the AA in one. The six BAs comprised two common trunks, three single right sides, and one single left side. The targeted vessels were successfully catheterized and embolized by a coaxial microcatheter system using polyvinyl alcohol particles. Other pathologic BAs and nonbronchial systemic arteries also were embolized. Bleeding was immediately controlled in all patients with no recurrence of hemoptysis. No procedure-related complications occurred.ConclusionsApplication of EVE of anomalous origin of BAs in patients with hemoptysis is important, as demonstrated in the six reported patients. MDCTA before EVE or AA angiography during EVE is critical to avoid missing a rare aberrant BA originating from the upper portion of the AA.« less
Evaluation of the fuselage lap joint fatigue and terminating action repair
NASA Technical Reports Server (NTRS)
Samavedam, Gopal; Thomson, Douglas; Jeong, David Y.
1994-01-01
Terminating action is a remedial repair which entails the replacement of shear head countersunk rivets with universal head rivets which have a larger shank diameter. The procedure was developed to eliminate the risk of widespread fatigue damage (WFD) in the upper rivet row of a fuselage lap joint. A test and evaluation program has been conducted by Foster-Miller, Inc. (FMI) to evaluate the terminating action repair of the upper rivet row of a commercial aircraft fuselage lap splice. Two full scale fatigue tests were conducted on fuselage panels using the growth of fatigue cracks in the lap joint. The second test was performed to evaluate the effectiveness of the terminating action repair. In both tests, cyclic pressurization loading was applied to the panels while crack propagation was recorded at all rivet locations at regular intervals to generate detailed data on conditions of fatigue crack initiation, ligament link-up, and fuselage fracture. This program demonstrated that the terminating action repair substantially increases the fatigue life of a fuselage panel structure and effectively eliminates the occurrence of cracking in the upper rivet row of the lap joint. While high cycle crack growth was recorded in the middle rivet row during the second test, failure was not imminent when the test was terminated after cycling to well beyond the service life. The program also demonstrated that the initiation, propagation, and linkup of WFD in full-scale fuselage structures can be simulated and quantitatively studied in the laboratory. This paper presents an overview of the testing program and provides a detailed discussion of the data analysis and results. Crack distribution and propagation rates and directions as well as frequency of cracking are presented for both tests. The progression of damage to linkup of adjacent cracks and to eventual overall panel failure is discussed. In addition, an assessment of the effectiveness of the terminating action repair and the occurrence of cracking in the middle rivet row is provided, and conclusions of practical interest are drawn.
Special Section: Soil Ecology and Restoration Ecology
M.A. Callaham
2008-01-01
Sediments left behind in this dewatered reservoir in Wisconsin, USA, have different physical, chemical, and spatial characteristics than the soils they buried, a potential challenge for restoration (upper left, photo: Nick Balster). The soil profile shows effects of land-use history at the Calhoun Experimental Forest in South Carolina, USA.
5. FLAME DEFLECTOR AT LEFT, FERROCEMENT APRON AT RIGHT CENTER, ...
5. FLAME DEFLECTOR AT LEFT, FERROCEMENT APRON AT RIGHT CENTER, CONTROL BUILDING A AT FAR RIGHT, CONNECTING TUNNEL AT UPPER CENTER, VIEW TOWARDS NORTHEAST. - Glenn L. Martin Company, Titan Missile Test Facilities, Captive Test Stand D-2, Waterton Canyon Road & Colorado Highway 121, Lakewood, Jefferson County, CO
Left Dislocation in Near-Native French
ERIC Educational Resources Information Center
Donaldson, Bryan
2011-01-01
The present study is concerned with the upper limits of SLA--specifically, mastery of the syntax-discourse interface in successful endstate learners of second-language (L2) French (near-native speakers). Left dislocation (LD) is a syntactic means of structuring spoken French discourse by marking topic. Its use requires speakers to coordinate…
77 FR 20746 - Airworthiness Directives; Bombardier, Inc. Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-06
...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600.../ malfunctioning of the left-hand engine thrust control mechanism. This proposed AD would require modifying the left-hand engine upper core- cowl. We are proposing this AD to prevent jamming/malfunctioning of the...
77 FR 37342 - Airworthiness Directives; Bombardier, Inc. Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-21
...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600... was prompted by reports of jamming/malfunctioning of the left-hand engine thrust control mechanism. This proposed AD would require modifying the left-hand engine upper core-cowl. We are proposing this AD...
12. Interior, boiler house, at elev. 55' looking west at ...
12. Interior, boiler house, at elev. 55' looking west at retired 300 lb. boilers #11, 10, and 9 with pulverized coal storage hoppers on upper left and rock coal storage bunkers on upper right. - Manchester Street Generating Station, Manchester Street Station, 460 Eddy Street, Providence, Providence County, RI
2009-06-25
51F-37-014 (29 July-6 Aug 1985) --- This Earth view shows Oregon and Washington including metropolitan Portland at the center. The Columbia River can be seen from Goble (upper left) upstream to Bonneville (upper right). The Willamette River is at the lower photo and seen upstream to east of McMinnville.
94. Photographic copy of historic photo, December 26, 1929 (original ...
94. Photographic copy of historic photo, December 26, 1929 (original print filed in Record Group 115, National Archives, Washington, D.C.). OWYHEE DAM-LOADING CAR FROM CABLEWAY SKIP. CABLEWAY CONTROL HOUSE IN UPPER RIGHT, PART OF UPPER COFFERDAM AT LEFT. - Owyhee Dam, Across Owyhee River, Nyssa, Malheur County, OR
2016-09-19
iss049e007067 (09/19/2016) --- Night views of the Earth from the International Space Station. This image is the southern Persian Gulf at night centered on Dubai and Abu Dhabi; east is at the top of the image with the coast of Iran to upper left and Muscat, Oman upper right.
Apollo 40th Anniversary History Panel
2009-07-15
John Logsdon, Charles A. Lindbergh chair in aerospace history at the Smithsonianan, left, speaks as other panelists look on during an Apollo History and Legacy roundtable discussion, Thursday, July 16, 2009, at NASA Headquarters in Washington. Photo Credit: (NASA/Paul E. Alers)
Effect of the mileage of a passenger car on changes in its body geometry
NASA Astrophysics Data System (ADS)
Gonera, Jarosław; Napiórkowski, Jerzy
2018-04-01
This study analyses the effect of the mileage of a passenger car on changes in its body geometry in regards to its safety. Ninety-six passenger cars used in similar environmental conditions were examined. The required position of twelve base points was compared to their actual position. Those were the points responsible for the active and passive safety of a car on the left and right side of the floor panel. The geometry of the floor panel was measured with a GYSMETER device manufactured by GYS and Allvis Light software. Increasing mileage was found to result in increasing changes in the floor panel geometry, which take place mainly on the right side of a car and at points affecting passive safety.
3. Main Control Switchboard (front), view to the southwest, with ...
3. Main Control Switchboard (front), view to the southwest, with item 1 (the synchronization monitor) on the far left of the photograph and item 14 (the Libby transmission line panel) on the far right of the photograph. The operator's desk, with telephone and computer monitors, is also visible in left foreground of the photograph. - Washington Water Power Clark Fork River Noxon Rapids Hydroelectric Development, Powerhouse, South bank of Clark Fork River at Noxon Rapids, Noxon, Sanders County, MT
Kozakiewicz, Jacek; Gierlotka, Agata; Dec, Maciej; Stockfish, Jerzy
2010-01-01
The rare case of 75-years-old female patient was presented in this paper. She reported hoarseness in addition to pharyngeal pain, dysphagia and medium level dyspnea. Her exploration revealed a wide hematoma of the left lateral wall of orohypopharynx spreading to the left aryepiglottic fold, left aryepiglottic cartilage, false and true vocal fold and later to left lateral and posterior tracheal wall. The patient did not require a control of airway by intubation or tracheotomy according to quick relief after pharmacological treatment.
NASA Technical Reports Server (NTRS)
2004-01-01
This is the left-eye version of the 3-D cylindrical-perspective mosaic showing the view south of the martian crater dubbed 'Bonneville.' The image was taken by the navigation camera on the Mars Exploration Rover Spirit. The rover will travel toward the Columbia Hills, seen here at the upper left. The rock dubbed 'Mazatzal' and the hole the rover drilled in to it can be seen at the lower left. The rover's position is referred to as 'Site 22, Position 32.' This image was geometrically corrected to make the horizon appear flat.
Partial anomalous left pulmonary artery: report of two cases and review of literature.
Sen, Supratim; Winlaw, David S; Sholler, Gary F
2015-06-01
We describe two cases of anomalous origin of the left lower-lobe pulmonary artery from the right pulmonary artery. The primary diagnosis was mitral atresia, hypoplastic left ventricle, aortic arch hypoplasia in the first child, and tetralogy of Fallot in the second. In both cases, the pulmonary trunk gave rise to a left pulmonary artery in the normal position. In addition, a second branch of the left pulmonary artery arose from the right pulmonary artery, and passed posterior and inferior to the left main or upper-lobe bronchus to supply the left lower lobe. In this review, we compare our findings with previously reported examples of this extremely rare cardiac malformation, and discuss possible embryological explanations for the lesion.
Schell, Kathleen; Bradley, Elisabeth; Bucher, Linda; Seckel, Maureen; Lyons, Denise; Wakai, Sandra; Bartell, Deborah; Carson, Elizabeth; Chichester, Melanie; Foraker, Teresa; Simpson, Kathleen
2005-05-01
When the upper arm (area from shoulder to elbow) is inaccessible and/or a standard-sized blood pressure cuff does not fit, some healthcare workers use the forearm to measure blood pressure. To compare automatic noninvasive measurements of blood pressure in the upper arm and forearm. A descriptive, correlational comparison study was conducted in the emergency department of a 1071-bed teaching hospital. Subjects were 204 English-speaking patients 6 to 91 years old in medically stable condition who had entered the department on foot or by wheelchair and who had no exclusions to using their left upper extremity. A Welch Allyn Vital Signs 420 series monitor was used to measure blood pressure in the left upper arm and forearm with the subject seated and the upper arm or forearm at heart level. Pearson r correlation coefficients between measurements in the upper arm and forearm were 0.88 for systolic blood pressure and 0.76 for diastolic blood pressure (P < .001 for both). Mean systolic pressures, but not mean diastolic pressures, in the upper arm and forearm differed significantly (t = 2.07, P = .04). A Bland-Altman analysis indicated that the distances between the mean values and the limits of agreement for the 2 sites ranged from 15 mm Hg (mean arterial pressure) to 18.4 mm Hg (systolic pressure). Despite strict attention to correct cuff size and placement of the upper arm or forearm at heart level, measurements of blood pressure obtained noninvasively in the arm and forearm of seated patients in stable condition are not interchangeable.
IMP 7 (Explorer 47) trajectory, September 26, 1972 to September 25, 1978
NASA Technical Reports Server (NTRS)
Milligan, Pamela A.; Lazarus, Alan J.
1988-01-01
The trajectory plots for IMP 7 (Explorer 47) are contained. For each orbit the trajectory is shown in five panels on two pages; each panel is a different representation or projection. The trajectory parameters were obtained from the multi-coordinate ephemeris (MCE) tapes supplied to IMP experimenters by the IMP project. The plots on the right hand pages use a geocentric, solar-ecliptic coordinate system. Distances are in units of earth radii. The plots on the left hand pages use geocentric, solar magnetospheric coordinates with distances in earth radii.
2006-08-01
immune modulatory properties on blood -derived immune competent cells – in keeping with the observations made by others with angiostatin. To address...factor (vWF) antibody (Fig. 4B, left panel). The number (Fig. 4C) as well as the length (Fig. 4B, right panel) of blood vessels was significantly reduced...from heparinized human peripheral blood were assayed for cell- surface expression of the adhesion marker CD11b (Mac-1) by flow cytometry analysis, and
2002-06-13
KENNEDY SPACE CENTER, FLA. -- The 2002 Florida Press Association and Florida Society of Newspaper Editors Convention offers a panel on space. At the podium is Bob Stover, managing editor, Florida Today. Panel participants enjoying a laugh are (left to right) Craig Covault, senior editor, Aviation Week; Howard Benedict, retired AP reporter; JoAnn Morgan, director, External Relations and Business Development, Kennedy Space Center; Marcia Dunn, AP reporter. The convention was held at the Debus Center, KSC Visitors Complex. Also speaking at the convention were Center Director Roy Bridges and NASA Associate Deputy Administrator Dr. Daniel Mulville
2016-10-01
5 Figure 4. Preclinical trial using ISRIB (inhibitor of Stress Response, phosphor-eIF2a) Left panel. Right panel showed MRI of tumor. Tumor...survival adaptive response pathway to increase cellular fitness and tumor growth. Our genetically and pharmacologically preliminary data showed that...1§ Merritt P. Edlind,1 Peter R. Carroll,1 Won Kim,2 Davide Ruggero1,3‡http D ow nloaded from Pharmacological inhibitors against the PI3K-AKT-mTOR
2004-09-30
KENNEDY SPACE CENTER, FLA. - The south wall of the Vehicle Assembly Building is bathed in light at night to allow workers on a scaffold (at left) to cover the holes with corrugated steel so the facility can be returned to performing operational activities. Xenon lights on the ground provide the illumination. The VAB lost 820 panels from the south wall during Frances, and 25 additional panels during Hurricane Jeanne. The VAB stands 525 feet tall. Central Florida, including Kennedy Space Center, was battered by four hurricanes between Aug. 13 and Sept. 26.
Bayard, Nathanaël Frank; Barnett, Stephen Arthur; Rinieri, Philippe; Melki, Jean; Peillon, Christophe; Baste, Jean Marc
2016-08-01
The feasibility of extending the VATS approach to locally advanced NSCLC has been described with good clinical outcome. These complex resections are still technically challenging and patient safety must remain the highest priority. In this article, we describe our routine VATS approach for left upper lobectomy in proximal, locally advanced lesions. Both surgical and anaesthesiology teams are trained during simulation sessions to respond rapidly in case of urgent thoracotomy. Encircling arterial and venous vessels allow control of inadvertent bleeding during difficult dissection. Also, whenever needed the double vessel control technique is a time saver waiting for conversion to thoracotomy.
NASA Technical Reports Server (NTRS)
2003-01-01
MGS MOC Release No. MOC2-566, 6 December 2003
This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a streamlined tail-pointing toward the upper right (northeast)--in the lee of a meteor impact crater in Marte Vallis, a large valley and channel complex southeast and east of the Elysium volcanic region. The fluid that went through Marte Vallis, whether water, mud, lava, or otherwise, created this form as it moved from the lower left (southwest) toward the upper right. The crater is located near 19.0oN, 174.9oW. The image covers an area 3 km (1.9 mi) wide and is illuminated from the left.Useful field of view in simulated driving: Reaction times and eye movements of drivers
Seya, Yasuhiro; Nakayasu, Hidetoshi; Yagi, Tadasu
2013-01-01
To examine the spatial distribution of a useful field of view (UFOV) in driving, reaction times (RTs) and eye movements were measured in simulated driving. In the experiment, a normal or mirror-reversed letter “E” was presented on driving images with different eccentricities and directions from the current gaze position. The results showed significantly slower RTs in the upper and upper left directions than in the other directions. The RTs were significantly slower in the left directions than in the right directions. These results suggest that the UFOV in driving may be asymmetrical among the meridians in the visual field. PMID:24349688
Sierra Nevada, California as seen from STS-59
1994-04-14
STS059-L09-162 (9-20 April 1994) --- Orient with the snow-covered mountains (Sierra Nevada of California) in the upper right corner. Then Owens Valley runs along the top of the photograph to Owens Lake playa at top center. The upper end of Death Valley extends from right to left in the foreground, with the drainage running down to a playa at Stovepipe Wells in the left foreground. Geologists are studying microwave signatures of the different playa surfaces, and the coatings on alluvial fans that extend from mountain masses, to try to sort out the history of different climates in this formerly wet but now hyperarid region.
11. photographer unknown 3 September 1984 AERIAL VIEW OF BONNEVILLE ...
11. photographer unknown 3 September 1984 AERIAL VIEW OF BONNEVILLE PROJECT TAKEN AT 6000-FOOT ELEVATION. POWERHOUSE #1 AND NAVIGATION LOCK ARE IN UPPER/CENTER PART OF PHOTO, AND THE DAM/SPILLWAY IS IN LEFT/CENTER; THE SECOND POWERHOUSE IS PARTIALLY VISIBLE IN LOWER LEFT CORNER. COLUMBIA RIVER FLOWS FROM LEFT-TO-RIGHT. - Bonneville Project, Columbia River, 1 mile Northeast of Exit 40, off Interstate 84, Bonneville, Multnomah County, OR
DOE Office of Scientific and Technical Information (OSTI.GOV)
Stinson, B.D.
1963-06-01
Results are reported of autoplastic transplantation of parts of nonirradiated, regenerated forelimb to the contralateral x-irradiated forelimb in adult Triturus viridescens. The right forelimbs were exposed to various doses of localized irradiation (1000 to 5000 r) followed by amputation of both left and right forelimbs through the mid forearm. Left limbs regenerated normally, but irradiated right limbs failed to exhibit any significant degree of regenerative activity over a 3-month period. Both forelimbs were reamputated through the distal humerus and observed for an additional two months. Left limbs produced normal regenerates, but irradiated right limbs gave no gross evidence of regenerationmore » at any of the radiation dose levels. Normal left regenerates were reamputated immediately distal to the elbow on the 60th day after the second amputation; the severed forearm was trimmed with scissors along anterior and posterior borders and denuded of skin over its proximal half, leaving an essentially complete forearm region as a normal autograft. This was implanted into the irradiated right upper arm stump, after ablation of the distal half of its humerus, with normal proximodistal polarity in all cases. The irradiated stump was reamputated through the distal portion of the implanted normal autograft two weeks after implantation, and was observed for four months. Periodic gross observations showed that over 90% of irradiated upper arms formed regenerates at a rate which paralleled that of nonirradiated controls. However, regenerates formed on irradiated upper arms exhibited a restriction of morphogenetic capacity, only 60% attaining 3- and 4-digit stages. Most of the morphologically more complex regenerates which developed on the irradiated upper arm stumps manifested left limb asymmetry despite their formation on right irradiated stumps, suggesting a relation between the asymmetry of the normal graft and that of the resulting regenerate. All regenerates which developed on irradiated upper arms showed marked deficiencies in the restoration of a complete proximodistal structural pattern appropriate to the level of amputation through the irradiated stump. However, the actual pattern produced was appropriate to the level of amputation through the implanted normal autograft. These findings support the hypothesis that normal grafts promote the formation of regenerates on irradiated limbs through the autonomous developmental activity of the transected graft. (BBB)« less
78 FR 51058 - Airworthiness Directives; Airbus Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-20
... below the center wing box between frame (FR) 40 and FR 42, and in part of the area of the upper... NDT inspections for cracks in the affected areas of the keel beam side panel below the center wing box...
Lightweight Deployable Mirrors with Tensegrity Supports
NASA Technical Reports Server (NTRS)
Zeiders, Glenn W.; Bradford, Larry J.; Cleve, Richard C.
2004-01-01
The upper part of Figure 1 shows a small-scale prototype of a developmental class of lightweight, deployable structures that would support panels in precise alignments. In this case, the panel is hexagonal and supports disks that represent segments of a primary mirror of a large telescope. The lower part of Figure 1 shows a complete conceptual structure containing multiple hexagonal panels that hold mirror segments. The structures of this class are of the tensegrity type, which was invented five decades ago by artist Kenneth Snelson. A tensegrity structure consists of momentfree compression members (struts) and tension members (cables). The structures of this particular developmental class are intended primarily as means to erect large segmented primary mirrors of astronomical telescopes or large radio antennas in outer space. Other classes of tensegrity structures could also be designed for terrestrial use as towers, masts, and supports for general structural panels. An important product of the present development effort is the engineering practice of building a lightweight, deployable structure as an assembly of tensegrity modules like the one shown in Figure 2. This module comprises two octahedral tensegrity subunits that are mirror images of each other joined at their plane of mirror symmetry. In this case, the plane of mirror symmetry is both the upper plane of the lower subunit and the lower plane of the upper subunit, and is delineated by the midheight triangle in Figure 2. In the configuration assumed by the module to balance static forces under mild loading, the upper and lower planes of each sub-unit are rotated about 30 , relative to each other, about the long (vertical) axis of the structure. Larger structures can be assembled by joining multiple modules like this one at their sides or ends. When the module is compressed axially (vertically), the first-order effect is an increase in the rotation angle, but by virtue of the mirror arrangement, the net first-order rotation between the uppermost and lowermost planes is zero. The need to have zero net rotation between these planes under all loading conditions in a typical practical structure is what prompts the use of the mirror configuration. Force and moment loadings other than simple axial compression produce only second-order deformations through strains in the struts and cables.
Monophasic Synovial Sarcoma Presenting as Mitral Valve Obstruction
Chokesuwattanaskul, Warangkana; Terrell, Jason; Jenkins, Leigh Ann
2010-01-01
We report the case of a 26-year-old man who experienced progressive left-sided chest pain and 2 episodes of near-syncope. Studies revealed a 15-cm mass in the upper left lung, a 10-cm mass in the medial base of the left lung, and a 5-cm left atrial mass that involved the left lung, infiltrated the left pulmonary vein, and prolapsed into the mitral valve, causing intermittent obstruction. The patient underwent surgical excision of the left atrial tumor. Pathologic evaluation confirmed the diagnosis of monophasic synovial sarcoma. To our knowledge, this is only the 3rd report of left atrial invasion and resultant mitral valve obstruction from a synovial sarcoma that infiltrated the pulmonary vein. We believe that this is the 1st documented case of a metastatic left atrial synovial sarcoma in monophasic form. PMID:20844626
Present state of knowledge of the upper atmosphere 1988: An assessment report
NASA Astrophysics Data System (ADS)
Watson, R. T.; Prather, M. J.; Kurylo, M. J.
1988-06-01
This document was issued in response to the Clean Air Act Amendments of 1977, Public Law 95-95, mandating that NASA and other key agencies submit biennial reports to Congress and EPA. NASA is to report on the state of our knowledge of the upper atmosphere, particularly the stratosphere. This is the sixth ozone assessment report submitted to Congress and the concerned regulatory agencies. Part 1 contains an outline of the NASA Upper Atmosphere Research Program and summaries of the research efforts supported during the last two years. An assessment is presented of the state of knowledge as of March 15, 1988 when the Ozone Trends Panel, organized by NASA and co-sponsored by the World Meteorological Organization, NOAA, FAA and the United Nations Environment Program released an executive summary of its findings from a critical in-depth study involving over 100 scientists from 12 countries. Chapter summaries of the International Ozone Trends Panel Report form the major part of this report. Two other sections are Model Predictions of Future Ozone Change and Chemical Kinetics and Photochemical Data for Use in Stratospheric Modeling. Each of these sections and the report in its entirety were peer reviewed.
Present state of knowledge of the upper atmosphere 1988: An assessment report
NASA Technical Reports Server (NTRS)
Watson, R. T.; Prather, M. J.; Kurylo, M. J.
1988-01-01
This document was issued in response to the Clean Air Act Amendments of 1977, Public Law 95-95, mandating that NASA and other key agencies submit biennial reports to Congress and EPA. NASA is to report on the state of our knowledge of the upper atmosphere, particularly the stratosphere. This is the sixth ozone assessment report submitted to Congress and the concerned regulatory agencies. Part 1 contains an outline of the NASA Upper Atmosphere Research Program and summaries of the research efforts supported during the last two years. An assessment is presented of the state of knowledge as of March 15, 1988 when the Ozone Trends Panel, organized by NASA and co-sponsored by the World Meteorological Organization, NOAA, FAA and the United Nations Environment Program released an executive summary of its findings from a critical in-depth study involving over 100 scientists from 12 countries. Chapter summaries of the International Ozone Trends Panel Report form the major part of this report. Two other sections are Model Predictions of Future Ozone Change and Chemical Kinetics and Photochemical Data for Use in Stratospheric Modeling. Each of these sections and the report in its entirety were peer reviewed.
Earth observations taken during STS-98 mission
2001-02-07
STS098-819-038 (17 February 2001) --- Much of Metropolitan Houston appears in this nearly vertical image photographed with a handheld 70mm camera onboard the Earth-orbiting Space Shuttle Atlantis. Interstate 45 and Highways 146 and 6 can be traced from lower right in Galveston County as they head into different directions toward a wide range of points in the city and its suburbs. NASA's Johnson Space Center can be easily pin-pointed just above the center point in the frame. Other points of interest in the area can be located by tracking over the various U.S., state and interstate highways---10, 51, 610 loop, Beltway 8 and others. Downtown Houston is at left center, but the so-called Uptown area is just out of frame at left. Galveston Bay takes up most of the upper right quadrant. Lake Houston is at upper left. A small piece of the Gulf of Mexico is in lower right.
NASA Technical Reports Server (NTRS)
2003-01-01
MGS MOC Release No. MOC2-549, 19 November 2003
The volcanic plains to the east, southeast, and south of the giant Tharsis volcano, Pavonis Mons, are dotted by dozens of small volcanoes. This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows an example located near 2.1oS, 109.1oW. The elongate depression in the lower left (southwest) quarter of the image is the collapsed vent area for this small, unnamed volcano. A slightly sinuous, leveed channel runs from the depression toward the upper right (north-northeast); this is the trace of a collapsed lava tube. The entire scene has been mantled by dust, such that none of the original volcanic rocks are exposed--except minor occurrences on the steepest slopes in the vent area. The scene is 3 km (1.9 mi) wide and illuminated by sunlight from the left/upper left.8. EAST ELEVATION OF SKIDOO MILL AND UPPER ORE BIN, ...
8. EAST ELEVATION OF SKIDOO MILL AND UPPER ORE BIN, LOOKING WEST FROM ACCESS ROAD. THE ROADWAY ON THIS LEVEL (CENTER) WAS USED FOR UNLOADING ORE BROUGHT ON BURROWS INTO THE ORE BIN AT THE TOP LEVEL OF THE MILL. THE ORE BIN IN THE UPPER LEFT WAS ADDED LATER WHEN ORE WAS BROUGHT TO THE MILL BY TRUCKS. - Skidoo Mine, Park Route 38 (Skidoo Road), Death Valley Junction, Inyo County, CA
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-07
... cardiac cycle. During diastole, the balloon will inflate, creating a rise in pressure in the aorta, thus..., deflation of the balloon causes a fall in pressure in the aorta, which assists the left ventricle by...
Apollo 40th Anniversary History Panel
2009-07-15
NASA chief historian Steven Dick, seated left, along with John Logsdon, Roger Launius, Michael Neufeld, Cristina Guidi and Craig Nelson, are seen at an Apollo History and Legacy roundtable discussion, Thursday, July 16, 2009, at NASA Headquarters in Washington. Photo Credit: (NASA/Paul E. Alers)
; width: 650px ; background-color: white } div.notesPanel { ; padding-right: 25px } li { ; margin-left ; border-color: black } table { ; border-spacing: 0px ; border-collapse: collapse } th, td { ; text-align ; border-style: none } a { ; text-decoration: none ; color: inherit } img { ; border: none
103. VIEW OF BEACH STRUCTURES ON NORTHWEST SIDE OF PIER, ...
103. VIEW OF BEACH STRUCTURES ON NORTHWEST SIDE OF PIER, LOOKING SOUTHEAST; PACIFIC ELECTRIC RAILWAY CAR (UPPER LEFT), CONCESSION STANDS (LOWER LEFT), BANDSHELL (RIGHT), AND PIER IN BACKGROUND Photograph #5352-HB. Photographer unknown, c. 1914 - Huntington Beach Municipal Pier, Pacific Coast Highway at Main Street, Huntington Beach, Orange County, CA
70. VIEW OF UNIT 2 THROUGH ACCESS DOOR, LOOKING DOWN ...
70. VIEW OF UNIT 2 THROUGH ACCESS DOOR, LOOKING DOWN AT MAIN SHAFT. NOTE WELDER'S SIGNATURE IN SHADOWS IN UPPER LEFT CORNER AND PHOTOGRAPHER'S STROBE POWER CABLE IN LOWER RIGHT CORNER. ORIENTATION OF CAMERA IS FACING LEFT BANK, PERPENDICULAR TO RIVER FLOW - Swan Falls Dam, Snake River, Kuna, Ada County, ID
Solitary necrobiotic xanthogranuloma of an upper extremity in association with multiple myeloma.
Bain, E Eugene; Meehan, Shane A; Hale, Elizabeth K
2014-05-01
Necrobiotic xanthogranuloma (NXG) is an uncommon granulomatous disorder of unknown pathogenesis that often presents with yellowish plaques in a periorbital distribution. While a majority of cases are associated with an underlying paraproteinemia of the IgG kappa type, a much smaller number are found to be associated with an underlying multiple myeloma. We present a case of a 78-year-old male with an isolated lesion of NXG on his right upper extremity. Following his diagnosis of NXG, further investigation for underlying systemic disorders with serum immunofixation revealed a monoclonal IgG kappa immunoglobulin with an M-spike of 1.2 g/dL. A PET-CT demonstrated bone destruction in the left proximal fifth rib, left scapula, the anterior lumbar I (L1) vertebrae, the left lumbar III (L3) vertebrae posterior elements and possibly left sacrum. A bone marrow biopsy revealed 18 % plasma cells. With these findings he was diagnosed with stage I multiple myeloma. Though clinically unimpressive and atypical in location for NXG, early biopsy and diagnosis of this solitary lesion led to the discovery of his hematopoietic disorder.
NASA Technical Reports Server (NTRS)
2002-01-01
Launched October 7, 2002 aboard the Space Shuttle Orbiter Atlantis, the STS-112 mission lasted 11 days and performed three sessions of Extra Vehicular Activity (EVA). Its primary mission was to install the Starboard (S1) Integrated Truss Structure and Equipment Translation Aid (CETA) Cart to the International Space Station (ISS). The S1 truss provides structural support for the orbiting research facility's radiator panels, which use ammonia to cool the Station's complex power system. The S1 truss, attached to the S0 (S Zero) truss installed by the previous STS-110 mission, flows 637 pounds of anhydrous ammonia through three heat rejection radiators. The truss is 45-feet long, 15-feet wide, 10-feet tall, and weighs approximately 32,000 pounds. The CETA is the first of two human-powered carts that will ride along the International Space Station's railway providing a mobile work platform for future extravehicular activities by astronauts. This is a view of the newly installed S1 Truss as photographed during the mission's first scheduled EVA. The Station's Canadarm2 is in the foreground. Visible are astronauts Piers J. Sellers (lower left) and David A. Wolf (upper right), both STS-112 mission specialists.
International Space Station (ISS)
2002-10-10
Launched October 7, 2002 aboard the Space Shuttle Orbiter Atlantis, the STS-112 mission lasted 11 days and performed three sessions of Extra Vehicular Activity (EVA). Its primary mission was to install the Starboard (S1) Integrated Truss Structure and Equipment Translation Aid (CETA) Cart to the International Space Station (ISS). The S1 truss provides structural support for the orbiting research facility's radiator panels, which use ammonia to cool the Station's complex power system. The S1 truss, attached to the S0 (S Zero) truss installed by the previous STS-110 mission, flows 637 pounds of anhydrous ammonia through three heat rejection radiators. The truss is 45-feet long, 15-feet wide, 10-feet tall, and weighs approximately 32,000 pounds. The CETA is the first of two human-powered carts that will ride along the International Space Station's railway providing a mobile work platform for future extravehicular activities by astronauts. This is a view of the newly installed S1 Truss as photographed during the mission's first scheduled EVA. The Station's Canadarm2 is in the foreground. Visible are astronauts Piers J. Sellers (lower left) and David A. Wolf (upper right), both STS-112 mission specialists.
Revised upper limb module for spinal muscular atrophy: Development of a new module.
Mazzone, Elena S; Mayhew, Anna; Montes, Jacqueline; Ramsey, Danielle; Fanelli, Lavinia; Young, Sally Dunaway; Salazar, Rachel; De Sanctis, Roberto; Pasternak, Amy; Glanzman, Allan; Coratti, Giorgia; Civitello, Matthew; Forcina, Nicola; Gee, Richard; Duong, Tina; Pane, Marika; Scoto, Mariacristina; Pera, Maria Carmela; Messina, Sonia; Tennekoon, Gihan; Day, John W; Darras, Basil T; De Vivo, Darryl C; Finkel, Richard; Muntoni, Francesco; Mercuri, Eugenio
2017-06-01
There is a growing need for a robust clinical measure to assess upper limb motor function in spinal muscular atrophy (SMA), as the available scales lack sensitivity at the extremes of the clinical spectrum. We report the development of the Revised Upper Limb Module (RULM), an assessment specifically designed for upper limb function in SMA patients. An international panel with specific neuromuscular expertise performed a thorough review of scales currently available to assess upper limb function in SMA. This review facilitated a revision of the existing upper limb function scales to make a more robust clinical scale. Multiple revisions of the scale included statistical analysis and captured clinically relevant changes to fulfill requirements by regulators and advocacy groups. The resulting RULM scale shows good reliability and validity, making it a suitable tool to assess upper extremity function in the SMA population for multi-center clinical research. Muscle Nerve 55: 869-874, 2017. © 2016 Wiley Periodicals, Inc.
NASA Astrophysics Data System (ADS)
Hannoudi, Loay Akram; Lauring, Michael; Christensen, Jørgen Erik
2017-09-01
This paper is concerned with using solar panels as high-tech cladding materials on multi-angled facades for office buildings. The energy produced by the solar panels will be consumed inside the office rooms by cooling compressors, ventilation, lighting and office equipment. Each multi-angled facade unit is directed into two different orientations on a vertical axis (right and left), but not tilted up and down. The different facade orientations will optimize the use of solar radiation to produce the needed energy from the solar panels when placing them on the parapets of these facades. In this regard, four scenarios with different facade configurations and orientations are evaluated and discussed. The method for the simulations and calculations depends on two main programs: first, IDA ICE program to calculate the energy consumption and evaluate the indoor climate of the building; and second, PVBAT to calculate the cost of the electricity produced by the solar panels and evaluate the total amount of energy produced from these panels along with the ratio to the energy bought directly from the electricity grid. There is also an environmental evaluation for the system by calculating the CO2 emissions in the different scenarios.
Gao, Y Y; Chen, X H
2017-06-05
Objective: The aim of this study is to investigate the clinical significance of four quadrant localization in the diagnosis and treatment of unknown primary cervical metastases. Method: The clinical data with unknown primary cervical metastases, were analyzed retrospectively. All the patients have not been found the original site in the initial treatment. There are four quadrants in the neck, the neck line as the longitudinal axis, and edge of cricoid cartilage as the horizontal axis. When cervical metastasis occurred in the left and right upper quadrant, the primary tumor site and radiotherapy from the skull base to the root of the neck; when appear in left and right lower quadrant, the primary investigation site and radiotherapy from neck to thoracic mediastinum, left lower abdomen also includes following primary search. At the same time, bilateral cervical metastasis cancers, focusing on the central line near the primary focus. Specific treatment strategies include ipsilateral total neck dissection and radical radiotherapy of the above radiotherapy site. Result: Left upper neck in 4 cases, right upper neck in 5 cases, left lower neck in 7 cases, lower right neck in 8 cases and mixed area in 6 cases. Only 10 of 30 patients (33.3%) with primary sites were found in the follow up period. In accordance with the four quadrant localization, the median time was 6 months. Conclusion: Four quadrant localization to locate the primary site is accurate, and individualized comprehensive treatment is the key to improve the curative effect. Copyright© by the Editorial Department of Journal of Clinical Otorhinolaryngology Head and Neck Surgery.
View southeast, stone sluice, top of upper standing section, showing ...
View southeast, stone sluice, top of upper standing section, showing cement piers over arch in foreground, foot of break at third drop in center, retaining wall to left, barge canal sluice to right - Glens Falls Feeder, Sluice, Along south side of Glens Falls Feeder between locks 10 & 20, Hudson Falls, Washington County, NY
Display area, looking north towards the classified storage rooms, D.M. ...
Display area, looking north towards the classified storage rooms, D.M. Logistics and D.O. Offices in northwest corner. Viewing bridge is at upper left, and alert status display at upper right - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA
13. Photocopy of engraving (from A. Witteman's Ohio Soldiers' and ...
13. Photocopy of engraving (from A. Witteman's Ohio Soldiers' and Sailors' Home Near Sandusky, (New York: The Albertype Co.), 1894) VIEW EAST, COTTAGE 'L', (UPPER LEFT COTTAGE 'F', COTTAGE 'G'; UPPER RIGHT COTTAGE UNKNOWN) - Ohio Soldiers' & Sailors' Home, Cottage L, U.S. Route 250 at DeWitt Avenue, Sandusky, Erie County, OH
Fischer, Urs; Hess, Christian W; Rösler, Kai M
2005-01-01
It is a popular concept in clinical neurology that muscles of the lower face receive predominantly crossed cortico-bulbar motor input, whereas muscles of the upper face receive additional ipsilateral, uncrossed input. To test this notion, we used focal transcranial magnetic brain stimulation to quantify crossed and uncrossed cortico-muscular projections to 6 different facial muscles (right and left Mm. frontalis, nasalis, and orbicularis oris) in 36 healthy right-handed volunteers (15 men, 21 women, mean age 25 years). Uncrossed input was present in 78% to 92% of the 6 examined muscles. The mean uncrossed: crossed response amplitude ratios were 0.74/0.65 in right/left frontalis, 0.73/0.59 in nasalis, and 0.54/0.71 in orbicularis oris; ANOVA p>0.05). Judged by the sizes of motor evoked potentials, the cortical representation of the 3 muscles was similar. The amount of uncrossed projections was different between men and women, since men had stronger left-to-left projections and women stronger right-to-right projections. We conclude that the amount of uncrossed pyramidal projections is not different for muscles of the upper from those of the lower face. The clinical observation that frontal muscles are often spared in central facial palsies must, therefore, be explained differently. Moreover, gender specific lateralization phenomena may not only be present for higher level behavioural functions, but may also affect simple systems on a lower level of motor hierarchy.
Panel Discussions on Total Solar Irradiance Variations and the Maunder Minimum
NASA Technical Reports Server (NTRS)
Pap, J. M.; White, O. R.
1993-01-01
For more than a decade, total solar irradiance has been monitored from several satellites, namely and Nimbus-7, Solar Maximum Mission (SMM), the NASA ERBS, NOAA9 and NOAA10,EURECA, and the Upper Atmospheric Research Satellite (SARS).
Design and fabrication of composite wing panels containing a production splice
NASA Technical Reports Server (NTRS)
Reed, D. L.
1975-01-01
Bolted specimens representative of both upper and lower wing surface splices of a transport aircraft were designed and manufactured for static and random load tension and compression fatigue testing including ground-air-ground load reversals. The specimens were fabricated with graphite-epoxy composite material. Multiple tests were conducted at various load levels and the results were used as input to a statistical wearout model. The statically designed specimens performed very well under highly magnified fatigue loadings. Two large panels, one tension and compression, were fabricated for testing by NASA-LRC.
View port to starboard of compartment B127, warrant officers mess ...
View port to starboard of compartment B-127, warrant officers mess room. Note sideboard, table and paneling. Port holes to engine room skylight area are on left of photograph. (086) - USS Olympia, Penn's Landing, 211 South Columbus Boulevard, Philadelphia, Philadelphia County, PA
8. INTERIOR OF LIVING ROOM SHOWING DOORWAY TO KITCHEN AT ...
8. INTERIOR OF LIVING ROOM SHOWING DOORWAY TO KITCHEN AT PHOTO RIGHT CENTER, AND OPEN FOUR-PANEL WOOD DOOR TO NORTH BEDROOM AT PHOTO CENTER LEFT. VIEW TO SOUTHEAST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
Apollo 40th Anniversary History Panel
2009-07-15
NASA chief historian Steven Dick, seated left, shares a laugh with panelists John Logsdon, Roger Launius, Michael Neufeld, Cristina Guidi and Craig Nelson, at an Apollo History and Legacy roundtable discussion, Thursday, July 16, 2009, at NASA Headquarters in Washington. Photo Credit: (NASA/Paul E. Alers)
21. DETAIL INTERIOR VIEW OF ORIGINAL BENCH BOARD CONTROLS IN ...
21. DETAIL INTERIOR VIEW OF ORIGINAL BENCH BOARD CONTROLS IN CONTROL ROOM ON LEVEL +77 OF POWERHOUSE #1; THESE PANELS ARE ON LEFT SIDE OF BENCH BOARD CONTROLS. - Bonneville Project, Powerhouse No.1, Spanning Bradford Slough, from Bradford Island, Bonneville, Multnomah County, OR
2003-09-26
KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston (left) talks to a phalanx of media in the Orbiter Processing Facility. The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.
2001-11-27
KENNEDY SPACE CENTER, Fla. -- In the Vertical Processing Facility, members of the STS-109 crew look over the Solar Array 3 panels that will be replacing Solar Array 2 panels on the Hubble Space Telescope (HST). Trainers, at left, point to the panels while Mission Specialist Nancy Currie (second from right) and Commander Scott Altman (far right) look on. Other crew members are Pilot Duane Carey, Payload Commander John Grunsfeld and Mission Specialists James Newman, Richard Linnehan and Michael Massimino. The other goals of the mission are replacing the Power Control Unit, removing the Faint Object Camera and installing the Advanced Camera for Surveys, installing the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) Cooling System, and installing New Outer Blanket Layer insulation on bays 5 through 8. Mission STS-109 is scheduled for launch Feb. 14, 2002
1998-12-15
In the Space Station Processing Facility, a worker (left) guides the lifting of solar panels for the International Space Station (ISS). The panels are the first set of U.S.-provided solar arrays and batteries for ISS, scheduled to be part of mission STS-97 in December 1999. The mission, fifth in the U.S. flights for construction of ISS, will build and enhance the capabilities of the Space Station. It will deliver the solar panels as well as radiators to provide cooling. The Shuttle will spend 5 days docked to the station, which at that time will be staffed by the first station crew. Two space walks will be conducted to complete assembly operations while the arrays are attached and unfurled. A communications system for voice and telemetry also will be installed
Upper Limb Muscle and Brain Activity in Light Assembly Task on Different Load Levels
NASA Astrophysics Data System (ADS)
Zadry, Hilma Raimona; Dawal, Siti Zawiah Md.; Taha, Zahari
2010-10-01
A study was conducted to investigate the effect of load on upper limb muscles and brain activities in light assembly task. The task was conducted at two levels of load (Low and high). Surface electromyography (EMG) was used to measure upper limb muscle activities of twenty subjects. Electroencephalography (EEG) was simultaneously recorded with EMG to record brain activities from Fz, Pz, O1 and O2 channels. The EMG Mean Power Frequency (MPF) of the right brachioradialis and the left upper trapezius activities were higher on the high-load task compared to low-load task. The EMG MPF values also decrease as time increases, that reflects muscle fatigue. Mean power of the EEG alpha bands for the Fz-Pz channels were found to be higher on the high-load task compared to low-load task, while for the O1-O2 channels, they were higher on the low-load task than on the high-load task. These results indicated that the load levels effect the upper limb muscle and brain activities. The high-load task will increase muscle activities on the right brachioradialis and the left upper tapezius muscles, and will increase the awareness and motivation of the subjects. Whilst the low-load task can generate drowsiness earlier. It signified that the longer the time and the more heavy of the task, the subjects will be more fatigue physically and mentally.
Eliashiv, Dawn S; Kurelowech, Lacey; Quint, Patti; Chung, Jeffrey M; Otis, Shirley M; Gage, Nicole M
2014-06-01
The central goal of presurgical language mapping is to identify brain regions that subserve cortical language function to minimize postsurgical language deficits. Presurgical language mapping in patients with epilepsy presents a key challenge because of the atypical pattern of hemispheric language dominance found in this population, with higher incidences of bilateral and right-biased language dominance than typical. In this prospective study, we combine magnetoencephalography with a panel of tasks designed to separately assess receptive and expressive function to provide a sensitive measure of language function in 15 candidates for resective surgery. We report the following: 4 of 15 patients (27%) showed left hemisphere dominance across all tasks, 4 of 15 patients (27%) showed right hemisphere dominance across all tasks, and 7 of 15 (46%) showed discordant language dominance, with right-dominant receptive and left-dominant expressive language. All patients with discordant language dominance showed this right-receptive and left-expressive pattern. Results provide further evidence supporting the importance of using a panel of tasks to assess separable aspects of language function. The clinical relevance of the findings is discussed, especially about current clinical operative measures for assessing language dominance, which use single hemisphere procedure (intracarotid amobarbital procedure and awake intraoperative stimulation) for determining language laterality.
Melorheostosis and somatic mosaicism
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fryns, J.P.
1995-08-28
Melorheostosis is a rare congenital disorder of the bone and mesenchymal tissue. The longitudinal, cortical hyperostosis in the long bones has the appearance of wax flowing down the side of a candle. The short bones appear to manifest endosteal bone deposition. Usually only one limb is affected, but bilateral involvement is possible. Also, the skull, vertebrae, pelvis, and ribs can be affected. In 1980 we reported on a 3-year-old girl with clinical and radiological findings of melorheostosis, with manifest involvement of the left lower limb and scleroderma of the overlying soft tissues. Subsequently, at age 17 years, she was admittedmore » to the Orthopedic Department for an Ilizarov operation comprising lengthening and axis correction of the left tibia. Arterial hypertension (220/130 mm Hg) was noted, and biochemical studies documented high plasma renin activity and high aldosterone concentrations. Renal studies showed a small left kidney, and angiography showed several intrarenal high-grade stenoses of the left renal artery with poor opacification, and spotted nephrogram of the middle part and upper pole. Partial nephrectomy with removal of the upper and middle poles of the left kidney was performed. Pathological examination of the small and large blood vessels showed marked intimal proliferation and splitting of the elastica. 3 refs.« less
1972-01-01
This image depicts a layout of the Skylab workshop 1-G trainer crew quarters. At left, in the sleep compartment, astronauts slept strapped to the walls of cubicles and showered at the center. Next right was the waste management area where wastes were processed and disposed. Upper right was the wardroom where astronauts prepared their meals and foods were stored. In the experiment operation area, upper left, against the far wall, was the lower-body negative-pressure device (Skylab Experiment M092) and the Ergometer for the vectorcardiogram experiment (Skylab Experiment M063). The trainers and mockups were useful in the developmental phase, while engineers and astronauts were still working out optimum designs. They provided much data applicable to the manufacture of the flight articles.
DETAIL VIEW OF UPPER TRAM TERMINAL STRUCTURE, LOOKING NORTHEAST TOWARD ...
DETAIL VIEW OF UPPER TRAM TERMINAL STRUCTURE, LOOKING NORTHEAST TOWARD THE REAR OF THE STRUCTURE. THE WHEELS AT THE TOP OF THE TRAM BUCKETS RODE OFF THE STATIONARY CABLES ONTO THE TRACK SUPPORTED BY THE "C" IRONS SUSPENDED FROM THE TOP TIMBERS, CLEARLY SEEN AT THE TOP OF THE FRAME. THE ANCHOR POINTS FOR THE TWO STATIONARY CABLES ARE AT BOTTOM CENTER, JUST BELOW THE CABLE WHEEL. THE MAIN CABLE WHEEL IS IN THE DISTANCE AT CENTER LEFT. THE ORE CHUTES COMING FROM THE ORE BIN ARE AT LEFT CENTER EDGE. TRAM BUCKETS WERE CHARGED HERE. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA
2001-10-22
These band composites, acquired on June 4, 2000, cover a 11 by 13.5 km sub-scene in the Coachella Valley, CA. The area is shown by the yellow box on the full scene in the LOWER RIGHT corner, northwest of the Salton Sea. This is a major agricultural region of California, growing fruit and produce throughout the year. Different combinations of ASTER bands help identify the different crop types. UPPER LEFT: bands 3, 2, 1 as red, green, and blue (RGB); UPPER RIGHT: bands 4, 2, 1 as RGB; LOWER LEFT: bands 4, 3, 2 as RGB. The image is centered at 33.6 degrees north latitude, 116.1 degrees west longitude. http://photojournal.jpl.nasa.gov/catalog/PIA11161
NASA Technical Reports Server (NTRS)
2006-01-01
9 June 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a small portion of a dust-covered plain directly north of Labyrinthus Noctis which is cut by three linear troughs. The two long troughs running diagonally from the lower left (southwest) to the upper right (northeast) are connected by a third, shorter trough. Boulders derived from erosion of layered rock in the trough walls are seen perched on the sloping sidewalls and resting on the trough floors among giant windblown ripples. Location near: 0.2oN, 105.0oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Northern SpringImaging features of macrodystrophia lipomatosa: an unusual cause of a brawny arm
Dhanasekaran, Jagadeesan; Reddy, Ajit Kumar; Sarawagi, Radha; Lakshmanan, Prakash Manikka
2014-01-01
Macrodystrophia lipomatosa (MDL), a rare non-hereditary congenital disorder of localised gigantism, is characterised by progressive proliferation of all mesenchymal elements, with a disproportionate increase in fibroadipose tissue. We report a case of a 19-year-old man who presented with a history of painless enlargement of the left upper limb since childhood, which was gradually increasing in size and predominantly involving the radial aspect of the upper limb with relative sparing of the ulnar aspect. The patient was imaged with X-ray and MRI. Imaging and clinical features were classical of MDL. The patient underwent stage 1 reduction plasty of the left forearm; preoperative and histopathological findings confirmed the preoperative diagnosis. PMID:25406225
Ductility of polystyrene waste panel
NASA Astrophysics Data System (ADS)
Sulistyorini, Dewi; Yasin, Iskandar
2018-03-01
Polystyrene waste panel is one of alternative materials that uses polystyrene waste. This experiment is to utilize the polystyrene waste as a non structural panel to be evaluated the ductility. The specimen consisted of cement 250 kg/m3, polystyrene waste was as aggregate, water cement ratio was 0.4 and wire mesh diameter was 0.6 mm with the grid 6 mm × 6 mm placed on the top and bottom of the panels. The polystyrene panels were compressed at 2 MPa. Six specimens had dimension 80 cm length, 30 cm width and the thickness planned were two varieties, they were 0.5 cm and 1 cm. Flexural testing is used to examine load and deflection to measure the ductility. The load and the deflection showed that the maximum load for the specimen with 0.5 cm thickness is 0.4, 0.56 and 0.37. And for 1 cm thickness is 0.4, 0.36, 0.64. It shows that the thickness variation does not give effect on the maximum load. Result showed the average of Displacement Ductility Index of polystyrene waste panels with 0.5 cm thickness was 1.692 and for 1 cm thickness, the average was 4.043. So the average of the panel with 0.5 cm thickness planned is under 1.99 and the panel with 1 cm thickness planned is upper 3, therefore, it is considered imperative for adequate ductility.
21. PHOTOGRAPH OF PAGE 986 IN Keystone Coal Buyers Catalog, ...
21. PHOTOGRAPH OF PAGE 986 IN Keystone Coal Buyers Catalog, 1922, UPPER PHOTOGRAPH, VIEW SOUTH, COMMUNITY OF ETHEL; ETHEL COAL COMPANY MINE SUPPLY BUILDING IS LOCATED IN MID-GROUND LEFT OF CENTER PARTIALLY OBSCURED BY ROOF OF HOUSE IN FOREGROUND - Ethel Coal Company & Supply Building, Left fork of Dingess Run (Ethel Hollow), Ethel, Logan County, WV
Apollo 9 Mission image - Earth Observation - Georgia
1969-03-03
AS09-23-3567 (3-13 March 1969) --- Oblique view of the Atlanta, Georgia area as photographed from the Apollo 9 spacecraft during its Earth-orbital mission. The Chattahoochee River runs from Lake Sidney Lanier, near Gainesville (at upper left corner), south-westward by Atlanta and between Newnan and Carrollton (lower right). Allatoona Lake is at left center.
11. John and James Dobson Carpet Mill, East and West ...
11. John and James Dobson Carpet Mill, East and West parcels, site plan-upper left, elevation-lower left, and survey-right, 1877. Hexamer, Ernest and Son. Hexamer General Surveys, 1867-1895, Philadelphia, Pennsylvania: E. Hexamer and Son, 1877, pp. 1095-1096. - John & James Dobson Carpet Mill (West Parcel), 4041-4055 Ridge Avenue, Philadelphia, Philadelphia County, PA
22. AERIAL VIEW TO NORTH OF ENTIRE COAST GUARD AIR ...
22. AERIAL VIEW TO NORTH OF ENTIRE COAST GUARD AIR STATION SAN FRANCISCO, SHOWING BUILDING H AT LEFT AND BUILDING F AT UPPER LEFT. 30X24 inch black and white silver gelatin print. Photographers unknown. Date unknown. - U.S. Coast Guard Air Station San Francisco, Warehouse, 1020 North Access Road, San Francisco, San Francisco County, CA
4. Aerial view southwest, Adams Dam Road bottom left, State ...
4. Aerial view southwest, Adams Dam Road bottom left, State Route 100 center, back gates to Winterthur and Wilmington Country Club upper center, duck pond and reservoir bottom right and center, and State Route 92 center bottom. - Winterthur Farms, Intersection State Routes 92 & 100, Intersection State Routes 92 & 100, Winterthur, New Castle County, DE
GT-12 - EARTH SKY - IRAN, TRUCIAL COAST
1966-11-13
S66-63485 (13 Nov. 1966) --- Iran, Trucial Coast, Oman, Zagros Mountains, and Qishm Island (large island at lower left), as seen from the Gemini-12 spacecraft during its 25th revolution of Earth. Gulf of Oman is at lower left edge and the Persian Gulf is large body of water in upper half of photo. Photo credit: NASA
22. 1988 aerial of Tempe Canal, Sections 9, 16 and ...
22. 1988 aerial of Tempe Canal, Sections 9, 16 and 17 (T1N R5E) (left of page is north). Tempe Crosscut enters from center left. The Trunk Ditch right of way is visible just north of Mesa Country Club as a gray line running along the edge of a vacant lot. The Salt River bed is in the upper left corner. Photographer: Unknown, 1988. Source: SRP Cartographic Drafting - Tempe Canal, South Side Salt River in Tempe, Mesa & Phoenix, Tempe, Maricopa County, AZ
View east of the wye at Maryland Junction, West Virginia, ...
View east of the wye at Maryland Junction, West Virginia, milepost 164, with the Cumberland Extension entering at right. The diesel shop (built 1956) is at left. The WM continued northwest to Ridgeley Yard, and onto the passenger station in downtown Cumberland (out of view at upper left). The WM's Thomas Subivision went south to Elkins, West Virginia (lower left). - Western Maryland Railway, Cumberland Extension, Pearre to North Branch, from WM milepost 125 to 160, Pearre, Washington County, MD
Arabian Peninsula and northeast Africa as seen from Gemini 11 spacecraft
NASA Technical Reports Server (NTRS)
1966-01-01
Arabian Peninsula (on left) and northeast Africa (on right) as seen from the Gemini 11 spacecraft at an altitude of 340 nautical miles during its 27th revolution of the earth, looking southeast. Saudia Arabia, South Arabia, Yemen and Aden Protectorate are at left. At bottom right is Ethiopia. French Somaliland is in center on right shore. Somali is at upper right. Body of water at bottom is Red Sea. Gulf of Aden is in center; and at top left is Indian Ocean.
Buccal mucosal graft onlay repair for a ureteric ischemic injury following a pyeloplasty.
Agrawal, Vipul; Dassi, Vimal; Andankar, Mukund G
2010-01-01
A 38-year-old female presented with long stricture in the left upper ureter following a pyeloplasty causing persistent flank pain. A left PCNL with an antegrade endopyelotomy was attempted in view of a concomitant left renal 1.5 cm calculus in the lower calyx but it failed. Subsequently, a buccal mucosal onlay graft was applied on the strictured ureter. Follow-up at 3 months showed good uptake of the graft with patent passage for urine drainage.
Code of Federal Regulations, 2011 CFR
2011-10-01
... code 0×2D Lower-left border (⌊), G2 char code 0×7C G0 dash (-), char code 0×2D Horizontal border... (-), char code 0×2D Upper-left border (⌈), G2 char code 0×7F G0 dash (-), char code 0×2D (4) Support for..., if the character to the left of the embedded return is a hyphen, the embedded return should be...
Code of Federal Regulations, 2010 CFR
2010-10-01
... code 0×2D Lower-left border (⌊), G2 char code 0×7C G0 dash (-), char code 0×2D Horizontal border... (-), char code 0×2D Upper-left border (⌈), G2 char code 0×7F G0 dash (-), char code 0×2D (4) Support for..., if the character to the left of the embedded return is a hyphen, the embedded return should be...
NASA Exploration Forum: Human Path to Mars
2014-04-29
Sam Scimemi, Director of NASA's International Space Station Division, second from left, Phil McAlister, Director of NASA's Commercial Spaceflight Division, third from left, Dan Dumbacher, Deputy Associate Administrator of NASA's Exploration Systems Development, center, Michele Gates, Senior Technical Advisor of NASA's Human Exploration and Operations Mission Directorate, second from right, and Jason Crusan, Director of NASA's Advanced Exploration Systems Division, right, sit on a panel during an Exploration Forum showcasing NASA's human exploration path to Mars in the James E. Webb Auditorium at NASA Headquarters on Tuesday, April 29, 2014. Photo Credit: (NASA/Joel Kowsky)
NASA Exploration Forum: Human Path to Mars
2014-04-29
Sam Scimemi, Director of NASA's International Space Station Division, left, Phil McAlister, Director of NASA's Commercial Spaceflight Division, second from left, Dan Dumbacher, Deputy Associate Administrator of NASA's Exploration Systems Development, center, Michele Gates, Senior Technical Advisor of NASA's Human Exploration and Operations Mission Directorate, second from right, and Jason Crusan, Director of NASA's Advanced Exploration Systems Division, right, sit on a panel during an Exploration Forum showcasing NASA's human exploration path to Mars in the James E. Webb Auditorium at NASA Headquarters on Tuesday, April 29, 2014. Photo Credit: (NASA/Joel Kowsky)
Earth view taken by the Expedition 25 crew
2010-10-29
ISS025-E-010008 (29 Oct. 2010) --- From 220 miles above Earth, one of the Expedition 25 crew members onboard the International Space Station shot this night time image of the northern Gulf coast. Mobile Bay and the city of Mobile (top left, beneath one of the solar panels of a docked Russian Soyuz spacecraft), New Orleans and Houston are visible as the view ?moves? southeastward. The Interstate Highway 20 cities of Jackson, Shreveport, Dallas and Fort Worth are also visible further inland. The view extends northward (left) to Little Rock and Oklahoma City.
15. INTERIOR OF POWER PLANT LOOKING SOUTHWEST. BACK SIDE OF ...
15. INTERIOR OF POWER PLANT LOOKING SOUTHWEST. BACK SIDE OF ELECTRICAL PANEL ON LEFT, AND C. 1910 GENERATOR COVER ON RIGHT. - Potomac Power Plant, On West Virginia Shore of Potomac River, about 1 mile upriver from confluence with Shenandoah River, Harpers Ferry, Jefferson County, WV
126. REDUNDANCY SYSTEM CONTROLS FOR UMBILICAL MAST RETRACTION AT LOWER ...
126. REDUNDANCY SYSTEM CONTROLS FOR UMBILICAL MAST RETRACTION AT LOWER LEFT SIDE OF HYDRAULIC CONTROL PANEL IN UMBILICAL MAST PUMP ROOM (209), LSB (BLDG. 751) - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
109. REDUNDANCY SYSTEM CONTROLS FOR UMBILICAL MAST RETRACTION AT LOWER ...
109. REDUNDANCY SYSTEM CONTROLS FOR UMBILICAL MAST RETRACTION AT LOWER LEFT SIDE OF HYDRAULIC CONTROL PANEL IN UMBILICAL MAST PUMP ROOM (109), LSB (BLDG. 770) - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
NASA Exploration Forum: Human Path to Mars
2014-04-29
Ellen Stofan, NASA Chief Scientist, left, and David Miller, NASA Chief Technologist, right, participate in a panel discussion during an Exploration Forum showcasing NASA's human exploration path to Mars in the James E. Webb Auditorium at NASA Headquarters on Tuesday, April 29, 2014. Photo Credit: (NASA/Joel Kowsky)
12. Interior view, fuel tanks on east side of power ...
12. Interior view, fuel tanks on east side of power plant, electrical panels on the left and fuel tanks in the center looking north - Naval Air Station Fallon, Power Plant, 800 Complex, off Carson Road near intersection of Pasture & Berney Roads, Fallon, Churchill County, NV
Sally Ride Women in Science Panel
2013-05-17
Panel discussion participants, from left, Linda Billings, research professor, Media and Public Affairs, The George Washington University, Ellen Ochoa, director, NASA Johnson Space Center, Tom Costello, NBC News and moderator for the event, Margaret Weitekamp, space history curator, National Air and Space Museum, Dan Vergano, science writer for USA Today, and Rene McCormick, director of standards and quality, National Math and Science Initiative, are seen during a program titled "Sally Ride: How Her Historic Space Mission Opened Doors for Women in Science" held on Friday, May 17, 2013 at the National Air and Space Museum in Washington. Photo Credit: (NASA/Bill Ingalls)
23. PHOTOGRAPHIC ENLARGEMENT OF UPPER PHOTOGRAPH ON PAGE 986 IN ...
23. PHOTOGRAPHIC ENLARGEMENT OF UPPER PHOTOGRAPH ON PAGE 986 IN Keystone Coal Buyers Catalog, 1922, VIEW SOUTH, COMMUNITY OF ETHEL; ETHEL COAL COMPANY MINE SUPPLY BUILDING IS LOCATED IN MID-GROUND IN CENTER PARTIALLY OBSCURED BY ROOF OF HOUSE IN FOREGROUND - Ethel Coal Company & Supply Building, Left fork of Dingess Run (Ethel Hollow), Ethel, Logan County, WV
13. John and James Dobson Carpet Mill, East and West ...
13. John and James Dobson Carpet Mill, East and West parcels, site plan-upper left, elevation-upper right, and survey-below, 1885. Hexamer, Ernest and Son. Hexamer General Surveys, 1867-1895, Philadelphia, Pennsylvania: E. Hexamer and Son, 1885, pp. 1890-1891. - John & James Dobson Carpet Mill (West Parcel), 4041-4055 Ridge Avenue, Philadelphia, Philadelphia County, PA
1980-12-17
Voyager 1 passed the Saturnian system in November 1980; nine months later Voyager 2 passed through this same system. The ensuing scientific discoveries were unprecedented with regards to the rings around Saturn and its satellite's chemical makeup. Pictured are: Saturn (shown with rings), Dione (forefront), Tethys and Mimas (lower right), Enceladus and Rhea (upper left) and Titan in distant orbit (upper right).
Murata, Atsuo; Fukunaga, Daichi
2018-04-01
This study attempted to investigate the effects of the target shape and the movement direction on the pointing time using an eye-gaze input system and extend Fitts' model so that these factors are incorporated into the model and the predictive power of Fitts' model is enhanced. The target shape, the target size, the movement distance, and the direction of target presentation were set as within-subject experimental variables. The target shape included: a circle, and rectangles with an aspect ratio of 1:1, 1:2, 1:3, and 1:4. The movement direction included eight directions: upper, lower, left, right, upper left, upper right, lower left, and lower right. On the basis of the data for identifying the effects of the target shape and the movement direction on the pointing time, an attempt was made to develop a generalized and extended Fitts' model that took into account the movement direction and the target shape. As a result, the generalized and extended model was found to fit better to the experimental data, and be more effective for predicting the pointing time for a variety of human-computer interaction (HCI) task using an eye-gaze input system. Copyright © 2017. Published by Elsevier Ltd.
MR image analytics to characterize upper airway architecture in children with OSAS
NASA Astrophysics Data System (ADS)
Tong, Yubing; Udupa, Jayaram K.; Torigian, Drew A.; Matsumoto, Monica M. S.; Sin, Sanghun; Arens, Raanan
2015-03-01
Mechanisms leading to Obstructive Sleep Apnea Syndrome (OSAS) in obese children are not well understood. We previously analyzed polysomnographic and demographic data to study the anatomical characteristics of the upper airway and body composition in two groups of obese children with and without OSAS, where object volume was evaluated. In this paper, in order to better understand the disease we expand the analysis considering a variety of features that include object-specific features such as size, surface area, sphericity, and image intensity properties of fourteen objects in the vicinity of the upper airway, as well as inter-object relationships such as distance between objects. Our preliminary results indicate several interesting phenomena: volumes and surface areas of adenoid and tonsils increase statistically significantly in OSAS. Standardized T2-weighted MR image intensities differ statistically significantly between the two groups, implying that perhaps intrinsic tissue composition undergoes changes in OSAS. Inter-object distances are significantly different between the two groups for object pairs (skin, oropharynx), (skin, fat pad), (skin, soft palate), (mandible, tongue), (oropharynx, soft palate), (left tonsil, oropharynx), (left tonsil, fat pad) and (left tonsil, right tonsil). We conclude that treatment methods for OSAS such as adenotonsillectomy should respect proportional object size relationships and spatial arrangement of objects as they exist in control subjects.
A Brain-Machine Interface Based on ERD/ERS for an Upper-Limb Exoskeleton Control.
Tang, Zhichuan; Sun, Shouqian; Zhang, Sanyuan; Chen, Yumiao; Li, Chao; Chen, Shi
2016-12-02
To recognize the user's motion intention, brain-machine interfaces (BMI) usually decode movements from cortical activity to control exoskeletons and neuroprostheses for daily activities. The aim of this paper is to investigate whether self-induced variations of the electroencephalogram (EEG) can be useful as control signals for an upper-limb exoskeleton developed by us. A BMI based on event-related desynchronization/synchronization (ERD/ERS) is proposed. In the decoder-training phase, we investigate the offline classification performance of left versus right hand and left hand versus both feet by using motor execution (ME) or motor imagery (MI). The results indicate that the accuracies of ME sessions are higher than those of MI sessions, and left hand versus both feet paradigm achieves a better classification performance, which would be used in the online-control phase. In the online-control phase, the trained decoder is tested in two scenarios (wearing or without wearing the exoskeleton). The MI and ME sessions wearing the exoskeleton achieve mean classification accuracy of 84.29% ± 2.11% and 87.37% ± 3.06%, respectively. The present study demonstrates that the proposed BMI is effective to control the upper-limb exoskeleton, and provides a practical method by non-invasive EEG signal associated with human natural behavior for clinical applications.
NASA Technical Reports Server (NTRS)
Stone, R. H.
1983-01-01
Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after 9 years of service. There are six Kevlar-49 panels on each aircraft: a left hand and right hand set of a wing body sandwich fairing; a solid laminate under wing fillet panel; and a 422 K (300 F) service aft engine fairing. The fairings have accumulated a total of 70,000 hours, with one ship set having over 24,000 hours service. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings. The service history to date indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.
1998-12-15
In the Space Station Processing Facility, the overhead crane slowly moves solar panels intended for the International Space Station (ISS). The panels are the first set of U.S.-provided solar arrays and batteries for ISS, scheduled to be part of mission STS-97 in December 1999. The mission, fifth in the U.S. flights for construction of ISS, will build and enhance the capabilities of the Space Station. It will deliver the solar panels as well as radiators to provide cooling. The Shuttle will spend 5 days docked to the station, which at that time will be staffed by the first station crew. Two space walks will be conducted to complete assembly operations while the arrays are attached and unfurled. A communications system for voice and telemetry also will be installed. At the left of the crane and panels is the Multipurpose Logistics Module (MPLM), the Leonardo A reusable logistics carrier, the MPLM is scheduled to be launched on Space Shuttle Mission STS-100, targeted for April 2000
2014-04-17
CAPE CANAVERAL, Fla. - The second set of Ogive panels for the Orion Launch Abort System have arrived at the Launch Abort System Facility, or LASF, at NASA’s Kennedy Space Center in Florida. One of the Ogive panels has been uncrated and has been lowered by crane onto a work stand for storage. To the left are the first two Ogive panels positioned on a work stand. During processing, the panels will be secured around the Orion crew module and attached to the Launch Abort System. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of Orion is scheduled to launch in 2014 atop a Delta IV rocket and in 2017 on NASA’s Space Launch System rocket. For more information, visit www.nasa.gov/orion. Photo credit: Kim Shiflett
Thoracoscopic anterior ‘fissure first’ technique for left lung cancer with an incomplete fissure
Samejima, Joji; Matsuura, Yosuke; Nakao, Masayuki; Uehara, Hirofumi; Nakagawa, Ken; Masuda, Munetaka; Okumura, Sakae
2016-01-01
Background Dealing with incomplete lung fissures during thoracoscopic surgery is difficult. Our objective was to evaluate the efficacy and safety of a thoracoscopic anterior ‘fissure first’ technique for dealing with incomplete left lung fissures. Methods One hundred and seventy patients underwent left upper lobectomy or left lower lobectomy between April 2008 and July 2014. Of these, 34 patients underwent surgery using a thoracoscopic anterior ‘fissure first’ technique for incomplete fissures (group A) and 136 underwent surgery using a conventional thoracoscopic method for unfused fissures (group B). A four-port complete thoracoscopic approach was used in all patients. After completion of the fissure, hilar lymphadenectomy was performed in the conventional manner. Results There were no significant differences between the two groups in operating time, blood loss, or duration of chest tube drainage. Patients in group A required more staple cartridges than those in group B (mean number of cartridges, 2.4 vs. 1.1; P<0.01). The two groups did not significantly differ with regard to the prevalence of air leaks (12% vs. 4%; P=0.11), either prolonged or delayed. Conclusions We found that a thoracoscopic anterior ‘fissure first’ technique for left lung cancer with an incomplete fissure enabled hilar lymphadenectomy to be performed in the conventional manner without any increase in the prevalence of air leaks, operating time, or duration of chest tube drainage. This technique should be considered for use in left upper lobectomy or left lower lobectomy in patients with an incomplete fissure. PMID:28066589
Thermoelectric Materials for Low Temperature Cooling
2009-10-02
Sb ratios, and testing the influence of Sn as a p-type dopant . These materials were found to be excellent from a mechanical and chemical viewpoint...some conductive oxides, most famously cobalt oxides, when the electrical charge carriers also Fig. 4. Upper panel: Thermoelectric figure of
The Reconstruction and Failure Analysis of the Space Shuttle Columbia
NASA Technical Reports Server (NTRS)
Russell, Richard; Mayeaux, Brian; McDanels, Steven; Piascik, Robert; Sjaj. Samdee[; Jerman, Greg; Collins, Thomas; Woodworth, Warren
2009-01-01
Several days following the Columbia accident a team formed and began planning for the reconstruction of Columbia. A hangar at the Kennedy Space Center was selected for this effort due to it's size, available technical workforce and materials science laboratories and access to the vehicle ground processing infrastructure. The Reconstruction team established processes for receiving, handling, decontamination, tracking, identifying, cleaning and assessment of the debris. Initially, a 2-dimensional reconstruction of the Orbiter outer mold line was developed. As the investigation progressed fixtures which allowed a 3-dimensional reconstruction of the forward portions of the left wing's leading edge was developed. To support the reconstructions and forensic analyses a Materials and Processes (M&P) 'team was formed. This M&P team established processes for recording factual observations, debris cleaning, and engineering analysis. Fracture surfaces and thermal effects of selected airframe debris were assessed, and process flows for both nondestructive and destructive sampling and evaluation of debris were developed. The Team also assessed left hand airframe components that were believed to be associated with a structural breach of Columbia. A major portion of this analysis was evaluation of metallic deposits were prevalent on left wing leading edge components. Extensive evaluation of the visual, metallurgical and chemical nature of the deposits provided conclusions that were consistent with the visual assessments and interpretations of the NASA lead teams and the findings of the Columbia Accident Investigation Board. Analytical data collected by the M&P Team showed that a significant thermal event occurred at the left wing leading edge in the proximity of LH RCC Panels 8-9, and a correlation was formed between the deposits and overheating in these areas to the wing leading edge components. The analysis of deposits also showed exposure to temperatures in excess of 1649 C (3200 F), which would severely degrade support structure, tiles, and RCC panel materials. The integrated failure analysis of wing leading edge debris and deposits strongly supported the hypothesis that a breach occurred at LH RCC Panel 8.
NASA Astrophysics Data System (ADS)
Barkanov, E.; Eglītis, E.; Almeida, F.; Bowering, M. C.; Watson, G.
2013-07-01
The present investigation is devoted to the development of new optimal design concepts that exploit the full potential of advanced composite materials in the upper covers of aircraft lateral wings. A finite-element simulation of three-rib-bay laminated composite panels with T-stiffeners and a stiffener pitch of 200 mm is carried out using ANSYS to investigate the effect of rib attachment to stiffener webs on the performance of stiffened panels in terms of their buckling behavior and in relation to skin and stiffener lay-ups, stiffener height, and root width. Due to the large dimension of numerical problems to be solved, an optimization methodology is developed employing the method of experimental design and the response surface technique. Minimal-weight optimization problems were solved for four load levels with account of manufacturing, repairability, and damage tolerance requirements. The optimal results were verified successfully by using the ANSYS and ABAQUS shared-node models.
Field, Martha S.
2017-01-01
Abstract There is a large body of literature demonstrating the efficacy of maternal folic acid intake in preventing birth defects, as well as investigations into potential adverse consequences of consuming folic acid above the upper intake level (UL). Recently, two authoritative bodies convened expert panels to assess risks from high intakes of folic acid: the U.S. National Toxicology Program and the UK Scientific Advisory Committee on Nutrition. Overall, the totality of the evidence examined by these panels, as well as studies published since the release of their reports, have not established risks for adverse consequences resulting from existing mandatory folic acid fortification programs that have been implemented in many countries. Current folic acid fortification programs have been shown to support public health in populations, and the exposure levels are informed by and adherent to the precautionary principle. Additional research is needed to assess the health effects of folic acid supplement use when the current upper limit for folic acid is exceeded. PMID:29155442
Heterogeneous upper-bound finite element limit analysis of masonry walls out-of-plane loaded
NASA Astrophysics Data System (ADS)
Milani, G.; Zuccarello, F. A.; Olivito, R. S.; Tralli, A.
2007-11-01
A heterogeneous approach for FE upper bound limit analyses of out-of-plane loaded masonry panels is presented. Under the assumption of associated plasticity for the constituent materials, mortar joints are reduced to interfaces with a Mohr Coulomb failure criterion with tension cut-off and cap in compression, whereas for bricks both limited and unlimited strength are taken into account. At each interface, plastic dissipation can occur as a combination of out-of-plane shear, bending and torsion. In order to test the reliability of the model proposed, several examples of dry-joint panels out-of-plane loaded tested at the University of Calabria (Italy) are discussed. Numerical results are compared with experimental data for three different series of walls at different values of the in-plane compressive vertical loads applied. The comparisons show that reliable predictions of both collapse loads and failure mechanisms can be obtained by means of the numerical procedure employed.
Materials Analysis: A Key to Unlocking the Mystery of the Columbia Tragedy
NASA Technical Reports Server (NTRS)
Mayeaux, Brian M.; Collins, Thomas E.; Piascik, Robert S.; Russel, Richard W.; Jerman, Gregory A.; Shah, Sandeep R.; McDanels, Steven J.
2004-01-01
Materials analyses of key forensic evidence helped unlock the mystery of the loss of space shuttle Columbia that disintegrated February 1, 2003 while returning from a 16-day research mission. Following an intensive four-month recovery effort by federal, state, and local emergency management and law officials, Columbia debris was collected, catalogued, and reassembled at the Kennedy Space Center. Engineers and scientists from the Materials and Processes (M&P) team formed by NASA supported Columbia reconstruction efforts, provided factual data through analysis, and conducted experiments to validate the root cause of the accident. Fracture surfaces and thermal effects of selected airframe debris were assessed, and process flows for both nondestructive and destructive sampling and evaluation of debris were developed. The team also assessed left hand (LH) airframe components that were believed to be associated with a structural breach of Columbia. Analytical data collected by the M&P team showed that a significant thermal event occurred at the left wing leading edge in the proximity of LH reinforced carbon carbon (RCC) panels 8 and 9. The analysis also showed exposure to temperatures in excess of 1,649 C, which would severely degrade the support structure, tiles, and RCC panel materials. The integrated failure analysis of wing leading edge debris and deposits strongly supported the hypothesis that a breach occurred at LH RCC panel 8.
14 CFR 29.1321 - Arrangement and visibility.
Code of Federal Regulations, 2011 CFR
2011-01-01
...— (1) The instrument that most effectively indicates attitude must be on the panel in the top center... directly below the attitude instrument; (3) The instrument that most effectively indicates airspeed must be adjacent to and to the left of the attitude instrument; and (4) The instrument that most effectively...
14 CFR 29.1321 - Arrangement and visibility.
Code of Federal Regulations, 2012 CFR
2012-01-01
...— (1) The instrument that most effectively indicates attitude must be on the panel in the top center... directly below the attitude instrument; (3) The instrument that most effectively indicates airspeed must be adjacent to and to the left of the attitude instrument; and (4) The instrument that most effectively...
14 CFR 29.1321 - Arrangement and visibility.
Code of Federal Regulations, 2013 CFR
2013-01-01
...— (1) The instrument that most effectively indicates attitude must be on the panel in the top center... directly below the attitude instrument; (3) The instrument that most effectively indicates airspeed must be adjacent to and to the left of the attitude instrument; and (4) The instrument that most effectively...
14 CFR 29.1321 - Arrangement and visibility.
Code of Federal Regulations, 2014 CFR
2014-01-01
...— (1) The instrument that most effectively indicates attitude must be on the panel in the top center... directly below the attitude instrument; (3) The instrument that most effectively indicates airspeed must be adjacent to and to the left of the attitude instrument; and (4) The instrument that most effectively...
123. UMBILICAL MAST PUMP ROOM (209), LSB (BLDG. 751). PUMP ...
123. UMBILICAL MAST PUMP ROOM (209), LSB (BLDG. 751). PUMP ON LEFT; HYDRAULIC CONTROL PANEL FOR UMBILICAL MAST AND TRENCH DOORS IN CENTER OF ROOM, FACING WEST. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
14. INTERIOR OF SOUTH BEDROOM SHOWING FOURPANEL DOORS TO KITCHEN ...
14. INTERIOR OF SOUTH BEDROOM SHOWING FOUR-PANEL DOORS TO KITCHEN AT PHOTO LEFT AND BATHROOM AT PHOTO RIGHT, AND BUILT-IN CLOSET BETWEEN THE DOORS ON NORTH WALL. VIEW TO NORTH. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
16. INTERIOR OF NORTH BEDROOM SHOWING FOURPANEL DOORS TO LIVING ...
16. INTERIOR OF NORTH BEDROOM SHOWING FOUR-PANEL DOORS TO LIVING ROOM AT PHOTO RIGHT AND BATHROOM AT PHOTO LEFT, AND BUILT-IN CLOSET BETWEEN THE DOORS ON SOUTH WALL. VIEW TO SOUTH. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
The National Reading Curriculum's Oobleck
ERIC Educational Resources Information Center
Venable, James W.
2006-01-01
Public elementary school teachers are in the fourth year of a mandated "national reading curriculum." A group of federally appointed experimental research scientists, known as the National Reading Panel (NRP), created a report, which is now the cornerstone for the Reading First document and a crucial underpinning of No Child Left Behind…
110. TUBING FOR HYDRAULIC FLUID AT BACK OF HYDRAULIC CONTROL ...
110. TUBING FOR HYDRAULIC FLUID AT BACK OF HYDRAULIC CONTROL PANEL IN UMBILICAL MAST PUMP ROOM (109), LSB (BLDG. 770) ACCUMULATOR FOR MAST RETRACTION ON LEFT. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
128. TUBING FOR HYDRAULIC FLUID AT BACK OF HYDRAULIC CONTROL ...
128. TUBING FOR HYDRAULIC FLUID AT BACK OF HYDRAULIC CONTROL PANEL IN UMBILICAL MAST PUMP ROOM (209), LSB (BLDG. 751). PUMP ON RIGHT; ACCUMULATOR FOR MAST RETRACTION ON LEFT. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
Commerical Crew Program (CCP) Astronauts Speak To Employees
2016-08-11
Astronauts selected to train for the flight tests of NASA’s Commercial Crew Program participated in a panel discussion with employees at NASA’s Kennedy Space Center in Florida. From left, are Kennedy Center Director Bob Cabana, Commercial Crew Program Manager Kathy Lueders, and astronauts Eric Boe and Suni Williams.
16. INTERIOR OF REAR BEDROOM SHOWING BUILTIN COMBINATION CABINET/SLIDING DOOR ...
16. INTERIOR OF REAR BEDROOM SHOWING BUILT-IN COMBINATION CABINET/SLIDING DOOR CLOSET, OPEN FIVE-PANELED DOOR TO KITCHEN AT PHOTO CENTER, AND OPEN SOLID DOOR TO BATHROOM AT PHOTO LEFT. VIEW TO SOUTHEAST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
12. INTERIOR OF FRONT BEDROOM SHOWING ELECTRICAL WALL HEATER ON ...
12. INTERIOR OF FRONT BEDROOM SHOWING ELECTRICAL WALL HEATER ON BACK WALL, OPEN FIVE-PANELED DOOR TO LIVING ROOM AT PHOTO LEFT, AND OPEN SOLID DOOR TO BATHROOM AT PHOTO CENTER. VIEW TO WEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
sulfide (SnS). The top image represents output from atomic force microscopy for the molecular sections and computations. The image shows modeled electronic density of states (top panel) of the the bandgap of the narrow-gap crystalline semiconductors (left and right sides of the image) when it
14 CFR 29.1321 - Arrangement and visibility.
Code of Federal Regulations, 2010 CFR
2010-01-01
...— (1) The instrument that most effectively indicates attitude must be on the panel in the top center... directly below the attitude instrument; (3) The instrument that most effectively indicates airspeed must be adjacent to and to the left of the attitude instrument; and (4) The instrument that most effectively...
78 FR 21082 - Airworthiness Directives; GROB-WERKE Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-09
... of proposed rulemaking (NPRM). SUMMARY: We propose to adopt a new airworthiness directive (AD) for... cable routing causing electrical shorting behind the left-hand (LH) cockpit instrument panel. We are... Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590...
Piana, Pitágoras A.; Cardoso, Bárbara F.; Dias, Joilson; Gomes, Luiz C.; Agostinho, Angelo A.; Miranda, Leandro E.
2017-01-01
Populations show spatial-temporal fluctuations in abundance, partly due to random processes and partly due to self-regulatory processes. We evaluated the effects of various external factors on the population numerical abundance of curimba Prochilodus lineatus in the upper Paraná River floodplain, Brazil, over a 19-year period. Panel data analysis was applied to examine the structure of temporal and spatial abundance while controlling auto-regressive processes and spatial non-homogeneity variances that often obscure relationships. As sources of population variation, we considered predation, competition, selected abiotic variables, construction of a dam upstream of the study area, water level and flood intensity during the spawning period. We found that biological interactions (predation and competition) were not significantly related to variations in curimba abundance; specific conductance was a space indicator of abundance, apparently linked to the biology of the species; intensity of floods determined inter-annual variation in abundances; Porto Primavera Dam negatively impacted the abundances at sites in the floodplain directly affected by discharges from the dam. Panel data analysis was a powerful tool that identified the need for intense flooding to maintain high abundances of curimba in the upper Paraná River. We believe our results apply to other species with similar life strategy.
[A case of chronic multifocal myositis].
Maruyama, T; Kondo, K; Tabata, K; Yanagisawa, N
1992-11-01
A 61-year-old civil engineer began to have slowly progressive muscle atrophy in the right shoulder and the left arm at 56 years of age. Muscle wasting became manifest in the left thigh at 59 years and in the right thigh at 60 years. He had mild difficulty in climbing and descending stairs. On examination, although he had notable muscle atrophy in the right trapezius and proximal muscles in the upper and lower extremities, his muscle strength was relatively well preserved. The muscle atrophy was asymmetrical; the right periscapular region and the left upper and lower extremities were more markedly atrophic. In addition, multiple foci of the striking muscle atrophy were noted in the upper trunk and the proximal limb muscles. Fasciculation was not present. Deep tendon reflexes were normal with no pathologic reflexes. Except for a moderately elevated serum creatine kinase level of 709 Ul/l (normal 40-170) and mildly elevated serum myoglobin level of 100 ng/ml (normal < 60), no laboratory tests showed abnormal values suggesting an inflammatory process. Motor and sensory nerve conduction velocities were within normal limits. Electromyography disclosed myopathic and neuropathic changes. Computed tomography (CT) of skeletal muscles showed asymmetrical muscle atrophy and patchy low-density foci. In biopsied left quadriceps and right gastrocnemius muscles which showed partially low density on CT, there was marked variation in muscle fiber size, with necrotic and regenerating fibers, an increased number of centrally placed nuclei, and interstitial fibrosis. There were numerous foci of mononuclear inflammatory cellular infiltration, especially around the blood vessels.(ABSTRACT TRUNCATED AT 250 WORDS)
Castro-Sánchez, Adelaida María; Moreno-Lorenzo, Carmen; Matarán-Peñarrocha, Guillermo A.; Feriche-Fernández-Castanys, Belen; Granados-Gámez, Genoveva; Quesada-Rubio, José Manuel
2011-01-01
The objective of this study was to evaluate the efficacy of connective tissue massage to improve blood circulation and intermittent claudication symptoms in type 2 diabetic patients. A randomized, placebo-controlled trial was undertaken. Ninety-eight type 2 diabetes patients with stage I or II-a peripheral arterial disease (PAD) (Leriche-Fontaine classification) were randomly assigned to a massage group or to a placebo group treated using disconnected magnetotherapy equipment. Peripheral arterial circulation was determined by measuring differential segmental arterial pressure, heart rate, skin temperature, oxygen saturation and skin blood flow. Measurements were taken before and at 30 min, 6 months and 1 year after the 15-week treatment. After the 15-week program, the groups differed (P < .05) in differential segmental arterial pressure in right lower limb (lower one-third of thigh, upper and lower one-third of leg) and left lower limb (lower one-third of thigh and upper and lower one-third of leg). A significant difference (P < .05) was also observed in skin blood flow in digits 1 and 4 of right foot and digits 2, 4 and 5 of left foot. ANOVA results were significant (P < .05) for right and left foot oxygen saturation but not for heart rate and temperature. At 6 months and 1 year, the groups differed in differential segmental arterial pressure in upper third of left and right legs. Connective tissue massage improves blood circulation in the lower limbs of type 2 diabetic patients at stage I or II-a and may be useful to slow the progression of PAD. PMID:19933770
Zhang, Fei-ruo; Wang, Sheng; He, Li-hua; Zhang, Ying; Wu, Shan-shan; Li, Jing-yun; Hu, Guang-yi; Ye, Kang-ping
2011-03-01
To study neck and shoulder work-related muscle fatigue of female sewing machine operators. 18 health female sewing machine operators without musculoskeletal disorders work in Beijing garment industry factory as volunteers in participate of this study. The maximal voluntary contraction (MVC) and 20% MVC of bilateral upper trapezium and cervical erectors spinae was tested before sewing operations, then the whole 20 time windows (1 time window = 10 min) sewing machine operations was monitored and the surface electromyography (sEMG) signals simultaneously was recorded after monitoring the 20%MVC was tested. Use amplitude analysis method to reduction recorded EMG signals. During work, the median load for the left cervical erector spinae (LCES), right cervical erector spinae (RCES), left upper trapezium (LUT) and right upper trapezium (RUT) respectively was 6.78 ± 1.05, 6.94 ± 1.12, 5.68 ± 2.56 and 6.47 ± 3.22, work load of right is higher than the left; static load analysis indicated the value of RMS(20%MVC) before work was higher than that value after work, the increase of right CES and UT RMS(20%MVC) was more; the largest 20%MVE of bilateral CES occurred at 20th time window, and that of bilateral UT happened at 16th. The work load of female sewing machine operators is sustained "static" load, and work load of right neck-shoulder is higher than left, right neck-shoulder muscle is more fatigable and much serious once fatigued.
VIEW LOOKING EAST. THE NORTH WALL OF SETTLING RESERVOIR NO. ...
VIEW LOOKING EAST. THE NORTH WALL OF SETTLING RESERVOIR NO. 3 IS AT THE LEFT. THE BLAISDELL SLOW SAND FILTER WASHING MACHINE IS SEEN AT THE UPPER LEFT AND SETTLING RESERVOIR NO. 4 IS SEEN BEYOND THE EAST WALL OF SETTLING RESERVOIR NO. 3. - Yuma Main Street Water Treatment Plant, Jones Street at foot of Main Street, Yuma, Yuma County, AZ
1. EXTERIOR OVERVIEW OF SOUTH END OF RUSH CREEK POWERHOUSE ...
1. EXTERIOR OVERVIEW OF SOUTH END OF RUSH CREEK POWERHOUSE RESIDENTIAL COMPLEX SHOWING THE RUSH CREEK POWERHOUSE AT PHOTO RIGHT (TAILRACE IN FOREGROUND), BUILDING 106 NEXT TO THE POWERHOUSE AT PHOTO LEFT CENTER, AND BUILDING 103 AT UPPER PHOTO LEFT ABOVE AND BEHIND BUILDING 106. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
Spatial location in brief, free-viewing face encoding modulates contextual face recognition
Felisberti, Fatima M.; McDermott, Mark R.
2013-01-01
The effect of the spatial location of faces in the visual field during brief, free-viewing encoding in subsequent face recognition is not known. This study addressed this question by tagging three groups of faces with cheating, cooperating or neutral behaviours and presenting them for encoding in two visual hemifields (upper vs. lower or left vs. right). Participants then had to indicate if a centrally presented face had been seen before or not. Head and eye movements were free in all phases. Findings showed that the overall recognition of cooperators was significantly better than cheaters, and it was better for faces encoded in the upper hemifield than in the lower hemifield, both in terms of a higher d′ and faster reaction time (RT). The d′ for any given behaviour in the left and right hemifields was similar. The RT in the left hemifield did not vary with tagged behaviour, whereas the RT in the right hemifield was longer for cheaters than for cooperators. The results showed that memory biases in contextual face recognition were modulated by the spatial location of briefly encoded faces and are discussed in terms of scanning reading habits, top-left bias in lighting preference and peripersonal space. PMID:24349694
[Prediction of the efficiency of endoscopic lung volume reduction by valves in severe emphysema].
Bocquillon, V; Briault, A; Reymond, E; Arbib, F; Jankowski, A; Ferretti, G; Pison, C
2016-11-01
In severe emphysema, endoscopic lung volume reduction with valves is an alternative to surgery with less morbidity and mortality. In 2015, selection of patients who will respond to this technique is based on emphysema heterogeneity, a complete fissure visible on the CT-scan and absence of collateral ventilation between lobes. Our case report highlights that individualized prediction is possible. A 58-year-old woman had severe, disabling pulmonary emphysema. A high resolution thoracic computed tomography scan showed that the emphysema was heterogeneous, predominantly in the upper lobes, integrity of the left greater fissure and no collateral ventilation with the left lower lobe. A valve was inserted in the left upper lobe bronchus. At one year, clinical and functional benefits were significant with complete atelectasis of the treated lobe. The success of endoscopic lung volume reduction with a valve can be predicted, an example of personalized medicine. Copyright © 2016 SPLF. Published by Elsevier Masson SAS. All rights reserved.
True Brachial Artery Aneurysm Presenting as a Non-Pulsatile Mass.
Pradhananga, A; Chao, X
2017-01-01
Brachial artery aneurysms are rare disease that can be encountered. It is divided into true and false. The frequency of true aneurysm of the brachial artery is so much unusual. So, we present a case of a 59 year old male who presented to us with complaint of mass in left upper limb since many years ago. Now, there was sudden onset of progressive pain with coldness, numbness, tingling sensation and blackish discolouration of skin from 8 hours. The left upper limb was pulseless and color Doppler ultrasound showed a non-pulsatile aneurysm at the mid level of left brachial artery associated with arterial occlusion in its distal branch by thrombus. The patient was successfully revascularised by interposing a saphenous vein graft. Thus,this case suggest that the prompt diagnosis of true brachial artery aneurysm by ultrasound or color Doppler ultrasound and the proper treatment by surgical repair can save limb from dangerous sequel Keywords: brachial artery aneurysm; color doppler ultrasound; true aneurysm; ultrasound.
Design of Snook in Depillaring Panel Using Continuous Miner
NASA Astrophysics Data System (ADS)
Chawla, Shailendra; Jaiswal, Ashok; Shrivastva, B. K.
2018-04-01
Different patterns of extraction of pillars during depillaring operation with continuous miner are adopted depending upon the geo-mining condition. Various sizes of snook are left during final extraction of coal in mechanized depillaring operation. The size of the snook plays a significant role in providing safe mining condition. Stability of the snook left during final extraction with continuous miner was analyzed using numerical modelling. A case study has been chosen for the simulation of the depillaring process with three scenarios of varying width of snook, i.e., 3.5, 4.5, and 5.5 m. The mine panel consists of 4 × 8 array of pillars having the width of 41 m center to center. Double split and fender method of mining is used with the straight line of extraction. Field investigation shows that the failure of immediate roof occurs after extraction of two or three fenders (i.e., about 40 m). The thickness of immediate roof was 2 m. A numerical model of a depillaring panel was simulated with three different sizes of snook, i.e., 3.5, 4.5, and 5.5 m in the study. An immediate roof of 2 m thickness was considered in the model. An interface has been introduced in between immediate and main roof. The immediate roof behaves as a cantilever during depillaring. It is concluded from the simulation of different size of snooks that snook width of 5.5 m shows reasonable residual strength to hold the immediate roof. Higher tensile stress was developed at the top of the immediate roof above the edge of the snook which leads the possible roof failure towards the goaf side. Vertical stress profile and yield profile in the panel at different stages of mechanized depillaring have also been plotted.
Yang, Byung Il; Song, Bo Kyoung; Joung, Sang Mi
2017-01-01
[Purpose] The purpose of this study was to determine whether two-handed task training is effective on motor learning of injured cerebral cortex activation and upper extremity function recovery after stroke. [Subjects and Methods] Two hemiplegic subjects participated in this study: one patient was affected on the dominant side of the body and the other was affected on the non-dominant side of the body, and both scored in the range of 58–66 in the Fugl-Meyer assessment. The excitability of the corticospinal tract and Manual Function Test were examined. [Results] The excitability of the corticospinal tract and the Manual Function Test showed significant differences in the activation of both sides of the cerebral cortex and in the variation in learning effect of upper extremity motor function recovery in patients with hemiplegic non-dominant hand (left). [Conclusion] The results suggested that two-handed task training had a different influence on dominant hand (right) and non-dominant hand (left) motor recovery. PMID:28210051
77 FR 70362 - Airworthiness Directives; The Boeing Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-26
..., 747-400F, 747SR, and 747SP series airplanes. This AD was prompted by reports of cracks in the main entry door number 1 upper main sill outer chord, along the bend radius of the chord on several airplanes...) repairs of the upper main sill outer chord of the left and right side main entry door number 1, repetitive...
LIVING ROOM. NOTE THE WINDOWS IN THE UPPER PORTION OF ...
LIVING ROOM. NOTE THE WINDOWS IN THE UPPER PORTION OF THE EXTERIOR WALL (LEFT) AND SLIDING DOORS TO THE DINING ROOM. VIEW FACING SOUTHWEST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, Four-Bedroom, Single-Family Type 10, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI
44. VIEW OF SOUTHWEST CORNER OF DRYER ROOM. DRYER FOUNDATION ...
44. VIEW OF SOUTHWEST CORNER OF DRYER ROOM. DRYER FOUNDATION AT BOTTOM OF VIEW, WITH 18 INCH REVERSIBLE BELT CONVEYOR (UPPER LEFT), AND 16 INCH BELT CONVEYOR FINES FEED TO CRUSHED OXIDIZED ORE BIN (CENTER TO UPPER RIGHT). DRYER EXHAUST IS BELOW FINES FEED BELT. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD
Improvement and Neuroplasticity after Combined Rehabilitation to Forced Grasping
Ogata, Atsuko; Kawahira, Kazumi; Shimodozono, Megumi
2017-01-01
The grasp reflex is a distressing symptom but the need to treat or suppress it has rarely been discussed in the literature. We report the case of a 17-year-old man who had suffered cerebral infarction of the right putamen and temporal lobe 10 years previously. Forced grasping of the hemiparetic left upper limb was improved after a unique combined treatment. Botulinum toxin type A (BTX-A) was first injected into the left biceps, wrist flexor muscles, and finger flexor muscles. Forced grasping was reduced along with spasticity of the upper limb. In addition, repetitive facilitative exercise and object-related training were performed under low-amplitude continuous neuromuscular electrical stimulation. Since this 2-week treatment improved upper limb function, we compared brain activities, as measured by near-infrared spectroscopy during finger pinching, before and after the combined treatment. Brain activities in the ipsilesional sensorimotor cortex (SMC) and medial frontal cortex (MFC) during pinching under electrical stimulation after treatment were greater than those before. The results suggest that training under electrical stimulation after BTX-A treatment may modulate the activities of the ipsilesional SMC and MFC and lead to functional improvement of the affected upper limb with forced grasping. PMID:28265475
77 FR 65808 - Airworthiness Directives; Airbus Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-31
... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... Airbus Model A320-214 and -232 airplanes. This AD was prompted by reports that medium-head fasteners were... installation of upper panels on Frame 35 in Airbus A320 final assembly line. Investigations revealed that...
Earth Observations taken by the Expedition Seven crew
2003-06-14
ISS007-E-07388 (14 June 2003) --- Some of the deepest canyons in the world cut west to the Pacific from the high crest of the Andes Mountains in Peru. This view taken by an Expedition 7 crewmember onboard the International Space Station (ISS) provides a birds-eye view down the canyons of the Rio Camana (center left) and the Rio Ocona (upper right). The low early morning sun highlights the extreme topography created by rapidly uplifting mountains and powerful water erosion by water dropping nearly 10,000 feet in this view. At the edge of the image are the snowy flanks of Nevado Coropuna, the highest mountain in the Cordillera Occidental (6613 meters). The coastal city of Camana is visible in the upper left.