Endogenous Retroviral Insertions Indicate a Secondary Introduction of Domestic Sheep Lineages to the Caucasus and Central Asia between the Bronze and Iron Age

PubMed Central

Schroeder, Oskar; Benecke, Norbert; Frölich, Kai; Peng, Zuogang; Kaniuth, Kai; Sverchkov, Leonid; Reinhold, Sabine; Belinskiy, Andrey; Ludwig, Arne

2017-01-01

Sheep were one of the first livestock species domesticated by humans. After initial domestication in the Middle East they were spread across Eurasia. The modern distribution of endogenous Jaagsiekte sheep retrovirus insertions in domestic sheep breeds suggests that over the course of millennia, successive introductions of improved lineages and selection for wool quality occurred in the Mediterranean region and most of Asia. Here we present a novel ancient DNA approach using data of endogenous retroviral insertions in Bronze and Iron Age domestic sheep from the Caucasus and Pamir mountain areas. Our findings support a secondary introduction of wool sheep from the Middle East between the Late Bronze Age and Iron Age into most areas of Eurasia. PMID:28632161

Endogenous Retroviral Insertions Indicate a Secondary Introduction of Domestic Sheep Lineages to the Caucasus and Central Asia between the Bronze and Iron Age.

PubMed

Schroeder, Oskar; Benecke, Norbert; Frölich, Kai; Peng, Zuogang; Kaniuth, Kai; Sverchkov, Leonid; Reinhold, Sabine; Belinskiy, Andrey; Ludwig, Arne

2017-06-20

Sheep were one of the first livestock species domesticated by humans. After initial domestication in the Middle East they were spread across Eurasia. The modern distribution of endogenous Jaagsiekte sheep retrovirus insertions in domestic sheep breeds suggests that over the course of millennia, successive introductions of improved lineages and selection for wool quality occurred in the Mediterranean region and most of Asia. Here we present a novel ancient DNA approach using data of endogenous retroviral insertions in Bronze and Iron Age domestic sheep from the Caucasus and Pamir mountain areas. Our findings support a secondary introduction of wool sheep from the Middle East between the Late Bronze Age and Iron Age into most areas of Eurasia.

X-ray Photoelectron Spectroscopy as a tool to investigate silane-based coatings for the protection of outdoor bronze: The role of alloying elements

NASA Astrophysics Data System (ADS)

Masi, G.; Balbo, A.; Esvan, J.; Monticelli, C.; Avila, J.; Robbiola, L.; Bernardi, E.; Bignozzi, M. C.; Asensio, M. C.; Martini, C.; Chiavari, C.

2018-03-01

Application of a protective coating is the most widely used conservation treatment for outdoor bronzes (cast Cu-Sn-Zn-Pb-Sb alloys). However, improving coating protectiveness requires detailed knowledge of the coating/substrate chemical bonding. This is particularly the case for 3-mercapto-propyl-trimethoxy-silane (PropS-SH) applied on bronze, exhibiting a good protective behaviour in outdoor simulated conditions. The present work deals with X-Ray Photoelectron Spectroscopy (XPS) and Electron Microscopy (FEG-SEM + FIB (Focused Ion Beam)) characterization of a thin PropS-SH film on bronze. In particular, in order to better understand the influence of alloying elements on coating performance, PropS-SH was studied first on pure Cu and Sn substrates then on bronzes with increasing alloy additions: Cu8Sn as well as a quinary Cu-Sn-Zn-Pb-Sb bronze. Moreover, considering the real application of this coating on historical bronze substrates, previously artificially aged ("patinated") bronze samples were prepared and a comparison between bare and "patinated" quinary bronzes was performed. In the case of coated quinary bronze, the free surface of samples was analysed by High Resolution Photoelectron Spectroscopy using Synchrotron Radiation (HR-SRPES) at ANTARES (Synchrotron SOLEIL), which offers a higher energy and lateral resolution. By compiling complementary spectroscopic and imaging information, a deeper insight into the interactions between the protective coating and the bronze substrate was achieved.

Ancient X chromosomes reveal contrasting sex bias in Neolithic and Bronze Age Eurasian migrations.

PubMed

Goldberg, Amy; Günther, Torsten; Rosenberg, Noah A; Jakobsson, Mattias

2017-03-07

Dramatic events in human prehistory, such as the spread of agriculture to Europe from Anatolia and the late Neolithic/Bronze Age migration from the Pontic-Caspian Steppe, can be investigated using patterns of genetic variation among the people who lived in those times. In particular, studies of differing female and male demographic histories on the basis of ancient genomes can provide information about complexities of social structures and cultural interactions in prehistoric populations. We use a mechanistic admixture model to compare the sex-specifically-inherited X chromosome with the autosomes in 20 early Neolithic and 16 late Neolithic/Bronze Age human remains. Contrary to previous hypotheses suggested by the patrilocality of many agricultural populations, we find no evidence of sex-biased admixture during the migration that spread farming across Europe during the early Neolithic. For later migrations from the Pontic Steppe during the late Neolithic/Bronze Age, however, we estimate a dramatic male bias, with approximately five to 14 migrating males for every migrating female. We find evidence of ongoing, primarily male, migration from the steppe to central Europe over a period of multiple generations, with a level of sex bias that excludes a pulse migration during a single generation. The contrasting patterns of sex-specific migration during these two migrations suggest a view of differing cultural histories in which the Neolithic transition was driven by mass migration of both males and females in roughly equal numbers, perhaps whole families, whereas the later Bronze Age migration and cultural shift were instead driven by male migration, potentially connected to new technology and conquest.

Human paleodiet and animal utilization strategies during the Bronze Age in northwest Yunnan Province, southwest China.

PubMed

Ren, Lele; Li, Xin; Kang, Lihong; Brunson, Katherine; Liu, Honggao; Dong, Weimiao; Li, Haiming; Min, Rui; Liu, Xu; Dong, Guanghui

2017-01-01

Reconstructing ancient diets and the use of animals and plants augment our understanding of how humans adapted to different environments. Yunnan Province in southwest China is ecologically and environmentally diverse. During the Neolithic and Bronze Age periods, this region was occupied by a variety of local culture groups with diverse subsistence systems and material culture. In this paper, we obtained carbon (δ13C) and nitrogen (δ15N) isotopic ratios from human and faunal remains in order to reconstruct human paleodiets and strategies for animal exploitation at the Bronze Age site of Shilinggang (ca. 2500 Cal BP) in northwest Yunnan Province. The δ13C results for human samples from Shilinggang demonstrate that people's diets were mainly dominated by C3-based foodstuffs, probably due to both direct consumption of C3 food and as a result of C3 foddering of consumed animals. Auxiliary C4 food signals can also be detected. High δ15N values indicate that meat was an important component of the diet. Analysis of faunal samples indicates that people primarily fed pigs and dogs with human food waste, while sheep/goats and cattle were foddered with other food sources. We compare stable isotope and archaeobotanical data from Shilinggang with data from other Bronze Age sites in Yunnan to explore potential regional variation in subsistence strategies. Our work suggests that people adopted different animal utilization and subsistence strategies in different parts of Yunnan during the Bronze Age period, probably as local adaptations to the highly diversified and isolated environments in the region.

Human paleodiet and animal utilization strategies during the Bronze Age in northwest Yunnan Province, southwest China

PubMed Central

Ren, Lele; Li, Xin; Kang, Lihong; Brunson, Katherine; Liu, Honggao; Dong, Weimiao; Li, Haiming; Min, Rui; Liu, Xu

2017-01-01

Reconstructing ancient diets and the use of animals and plants augment our understanding of how humans adapted to different environments. Yunnan Province in southwest China is ecologically and environmentally diverse. During the Neolithic and Bronze Age periods, this region was occupied by a variety of local culture groups with diverse subsistence systems and material culture. In this paper, we obtained carbon (δ13C) and nitrogen (δ15N) isotopic ratios from human and faunal remains in order to reconstruct human paleodiets and strategies for animal exploitation at the Bronze Age site of Shilinggang (ca. 2500 Cal BP) in northwest Yunnan Province. The δ13C results for human samples from Shilinggang demonstrate that people’s diets were mainly dominated by C3-based foodstuffs, probably due to both direct consumption of C3 food and as a result of C3 foddering of consumed animals. Auxiliary C4 food signals can also be detected. High δ15N values indicate that meat was an important component of the diet. Analysis of faunal samples indicates that people primarily fed pigs and dogs with human food waste, while sheep/goats and cattle were foddered with other food sources. We compare stable isotope and archaeobotanical data from Shilinggang with data from other Bronze Age sites in Yunnan to explore potential regional variation in subsistence strategies. Our work suggests that people adopted different animal utilization and subsistence strategies in different parts of Yunnan during the Bronze Age period, probably as local adaptations to the highly diversified and isolated environments in the region. PMID:28531221

Bioarchaeology of adaptation to a marginal environment in bronze age Western China.

PubMed

Berger, Elizabeth; Wang, Hui

2017-07-08

This study examines human adaptation to the 4000 BP climate change event, which is said to have increased the marginality of Inner Asian environments. We propose to define "marginal" environments not in relation to a specific economic activity (e.g., agriculture), but in relation to whether humans living there are physiologically stressed. Three sites in the Hexi Corridor of Gansu were studied, one from the early and two from the late Bronze Age (N = 125). The study includes three indicators of physiological stress: linear enamel hypoplasias (LEH); tibial periosteal lesions; and fertility. The early and late Bronze Age groups were compared to examine whether human physiological stress increased. The percent of individuals with LEH declined dramatically, indicating fewer growth disruptions. Tibial periosteal reactions also changed, from mostly active to mostly healing at the time of death, indicating that frailty declined. Fertility, which is sensitive to changes in population health and resource availability, did not change significantly. Counter to the dominant narrative of environmental deterioration and subsistence system collapse, the Bronze Age residents of the Hexi Corridor show no skeletal evidence that they suffered from resource shortages or struggled to adapt in the fluctuating climate that pertained after the 4000 BP climate event. In fact, this study found that people suffered from less frailty and fewer growth disruptions after the unstable climate had persisted for some time. Therefore, in human biological terms, the Hexi Corridor did not become more marginal for human habitation during the Bronze Age. © 2017 Wiley Periodicals, Inc.

Shaping bronze by heat and hammer: An experimental reproduction of Minoan Copper alloy forming techniques.

NASA Astrophysics Data System (ADS)

Nerantzis, Nerantzis

The compositions of copper-base tools, weapons, ornaments and ceremonial metalwork from numerous Late Bronze Age Aegean sites reveal a pattern of specific alloy combinations for the fabrication of certain classes of objects. Thus the majority of weapons and tools were made of high tin bronze whereas bronze statuettes, tripods and cauldrons contain small amounts of lead and in some cases tin is present in low amounts. Such diversity reflects the direct relationship between the compositions of prehistoric bronze objects and the art of their fabrication, because both the alloy additions and the impurities exert a pronounced effect on the forming capacity of alloys. In order to understand the correlation between composition and formability of Minoan bronzes, replica compositions with varying tin and lead contents were experimentally reproduced and their forming capacities were tested. Deformation and heat treatment of five tin and two leaded tin bronze alloys was attempted in order to replicate the forming stages for the shaping of cutting tools and bronze sheet for vessels and cauldrons. The amount of cold-working and annealing intervals, required to test the effects of workability on alloy properties, has been reflected as hardness values and transformations of the structural characteristics for each sample. It has been shown through the course of the experiment that high tin bronzes could be formed by frequent, short annealing stages at 600˚C and that it is possible to work-harden leaded bronze as long as time and temperatures are closely monitored.

Towards reconstruction of the lost Late Bronze Age intra-caldera island of Santorini, Greece.

PubMed

Karátson, Dávid; Gertisser, Ralf; Telbisz, Tamás; Vereb, Viktor; Quidelleur, Xavier; Druitt, Timothy; Nomikou, Paraskevi; Kósik, Szabolcs

2018-05-04

During the Late Bronze Age, the island of Santorini had a semi-closed caldera harbour inherited from the 22 ka Cape Riva Plinian eruption, and a central island referred to as 'Pre-Kameni' after the present-day Kameni Islands. Here, the size and age of the intracaldera island prior to the Late Bronze Age (Minoan) eruption are constrained using a photo-statistical method, complemented by granulometry and high-precision K-Ar dating. Furthermore, the topography of Late Bronze Age Santorini is reconstructed by creating a new digital elevation model (DEM). Pre-Kameni and other parts of Santorini were destroyed during the 3.6 ka Minoan eruption, and their fragments were incorporated as lithic clasts in the Minoan pyroclastic deposits. Photo-statistical analysis and granulometry of these lithics, differentiated by lithology, constrain the volume of Pre-Kameni to 2.2-2.5 km 3 . Applying the Cassignol-Gillot K-Ar dating technique to the most characteristic black glassy andesite lithics, we propose that the island started to grow at 20.2 ± 1.0 ka soon after the Cape Riva eruption. This implies a minimum long-term lava extrusion rate of ~0.13-0.14 km 3 /ky during the growth of Pre-Kameni.

A New Chronology for the Bronze Age of Northeastern Thailand and Its Implications for Southeast Asian Prehistory.

PubMed

Higham, Charles F W; Douka, Katerina; Higham, Thomas F G

2015-01-01

There are two models for the origins and timing of the Bronze Age in Southeast Asia. The first centres on the sites of Ban Chiang and Non Nok Tha in Northeast Thailand. It places the first evidence for bronze technology in about 2000 B.C., and identifies the origin by means of direct contact with specialists of the Seima Turbino metallurgical tradition of Central Eurasia. The second is based on the site of Ban Non Wat, 280 km southwest of Ban Chiang, where extensive radiocarbon dating places the transition into the Bronze Age in the 11th century B.C. with likely origins in a southward expansion of technological expertise rooted in the early states of the Yellow and Yangtze valleys, China. We have redated Ban Chiang and Non Nok Tha, as well as the sites of Ban Na Di and Ban Lum Khao, and here present 105 radiocarbon determinations that strongly support the latter model. The statistical analysis of the results using a Bayesian approach allows us to examine the data at a regional level, elucidate the timing of arrival of copper base technology in Southeast Asia and consider its social impact.

A New Chronology for the Bronze Age of Northeastern Thailand and Its Implications for Southeast Asian Prehistory

PubMed Central

Higham, Charles F. W.

2015-01-01

There are two models for the origins and timing of the Bronze Age in Southeast Asia. The first centres on the sites of Ban Chiang and Non Nok Tha in Northeast Thailand. It places the first evidence for bronze technology in about 2000 B.C., and identifies the origin by means of direct contact with specialists of the Seima Turbino metallurgical tradition of Central Eurasia. The second is based on the site of Ban Non Wat, 280 km southwest of Ban Chiang, where extensive radiocarbon dating places the transition into the Bronze Age in the 11th century B.C. with likely origins in a southward expansion of technological expertise rooted in the early states of the Yellow and Yangtze valleys, China. We have redated Ban Chiang and Non Nok Tha, as well as the sites of Ban Na Di and Ban Lum Khao, and here present 105 radiocarbon determinations that strongly support the latter model. The statistical analysis of the results using a Bayesian approach allows us to examine the data at a regional level, elucidate the timing of arrival of copper base technology in Southeast Asia and consider its social impact. PMID:26384011

Investigation of archaeological metal artefacts by laser-induced breakdown spectroscopy (LIBS)

NASA Astrophysics Data System (ADS)

Tankova, V.; Malcheva, G.; Blagoev, K.; Leshtakov, L.

2018-03-01

In this work, laser-induced breakdown spectroscopy was applied to determining the elemental composition of a set of ancient bronze artefacts dated from the Late Bronze Age and Early Iron Age (14th – 10th century BC). We used a Nd:YAG laser at 1064 nm with pulse duration of 10 ns and energy of 10 mJ and determined the elemental composition of the bronze alloy that was used in manufacturing the samples under study. The concentrations of tin and lead in the bulk of the examined materials was estimated after generating calibration curves for a set of four standard samples. The preliminary results of the analysis will provide information on the artefacts provenance and on the production process.

The Neolithic and Bronze Age Monument Complex of Thornborough, North Yorkshire, UK

NASA Astrophysics Data System (ADS)

Harding, Jan

The Neolithic and Bronze Age monument complex of Thornborough in North Yorkshire highlights the significance of heavenly bodies to religious belief and practice. Its investigation by a novel methodology employing virtual reality technology demonstrates alignments with Orion's Belt and the midwinter sunrise. It is argued that these were deliberate, replicating the seasonal movement of those using the complex and thereby suggesting a close relationship between people's skyscape and life cycles.

Nettle as a distinct Bronze Age textile plant.

PubMed

Bergfjord, C; Mannering, U; Frei, K M; Gleba, M; Scharff, A B; Skals, I; Heinemeier, J; Nosch, M-L; Holst, B

2012-01-01

It is generally assumed that the production of plant fibre textiles in ancient Europe, especially woven textiles for clothing, was closely linked to the development of agriculture through the use of cultivated textile plants (flax, hemp). Here we present a new investigation of the 2800 year old Lusehøj Bronze Age Textile from Voldtofte, Denmark, which challenges this assumption. We show that the textile is made of imported nettle, most probably from the Kärnten-Steiermark region, an area which at the time had an otherwise established flax production. Our results thus suggest that the production of woven plant fibre textiles in Bronze Age Europe was based not only on cultivated textile plants but also on the targeted exploitation of wild plants. The Lusehøj find points to a hitherto unrecognized role of nettle as an important textile plant and suggests the need for a re-evaluation of textile production resource management in prehistoric Europe.

Nettle as a distinct Bronze Age textile plant

PubMed Central

Bergfjord, C.; Mannering, U.; Frei, K. M.; Gleba, M.; Scharff, A. B.; Skals, I.; Heinemeier, J.; Nosch, M. -L; Holst, B.

2012-01-01

It is generally assumed that the production of plant fibre textiles in ancient Europe, especially woven textiles for clothing, was closely linked to the development of agriculture through the use of cultivated textile plants (flax, hemp). Here we present a new investigation of the 2800 year old Lusehøj Bronze Age Textile from Voldtofte, Denmark, which challenges this assumption. We show that the textile is made of imported nettle, most probably from the Kärnten-Steiermark region, an area which at the time had an otherwise established flax production. Our results thus suggest that the production of woven plant fibre textiles in Bronze Age Europe was based not only on cultivated textile plants but also on the targeted exploitation of wild plants. The Lusehøj find points to a hitherto unrecognized role of nettle as an important textile plant and suggests the need for a re-evaluation of textile production resource management in prehistoric Europe. PMID:23024858

Chemical and mineralogical characterization of archaeologicam building materials from Seyitomer Hoyuk Kutahya, Turkey.

NASA Astrophysics Data System (ADS)

Bilgen, Nejat; Olgun, Asim

This paper focuses on the spectroscopic and thermal analysis of the archaeological samples of mortar and plaster from middle Bronze Age and Achaemenid period in Seyitömer Höyük. The composition of the samples was investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and thermogravimetric thermal analysis (TG-DTA). The results showed that human used different types of raw materials in the preperation of the mortar and plaster in the Middle Bronze Age and Achaemenid period. The material used in middle Bronze Age contains muscovite whereas the material in Achaemenid period contains albite. Although, the chemical composition of the mortar and plaster used in the period were similar, the calcium content of the plaster is relatively higher than the one of the mortar indicating people's awareness of the binding properties of calcite.

Clay Corner: Recreating Chinese Bronze Vessels.

ERIC Educational Resources Information Center

Gamble, Harriet

1998-01-01

Presents a lesson where students make faux Chinese bronze vessels through slab or coil clay construction after they learn about the history, function, and design of these vessels. Utilizes a variety of glaze finishes in order to give the vessels an aged look. Gives detailed guidelines for creating the vessels. (CMK)

New results to discuss possibility of irrigation in Bat (Wadi Sharsah, northwestern Oman) before Hafit period (ca. 3100-2700 BCE)

NASA Astrophysics Data System (ADS)

Fouache, Eric; Desruelles, Stéphane; Eddargach, Wassel; Cammas, Cecilia; Wattez, Julia; Martin, Chloé; Tengberg, Margareta; Beuzen-Waller, Tara; Cable, Charlotte; Thornton, Christopher

2014-05-01

Registered as a World Heritage Site by UNESCO in 1989, the extensive archaeological site of Bat is situated within the Wadi Sharsah and around the modern village and palm grove of Bat, 24 km from the modern city of Ibri in northwestern Oman. The archaeological remains from the Bronze Age excavated by the Bat Archaeological Project are located in two mains areas. The northern area consists of a chain of low limestone hills cut by wadi tributaries leading to the main Wadi Sharsah. It is characterised by an exceptionnally high density of graves from two successive Bronze Age periods : Hafit (ca. 3100-2700 BCE) and Umm an-Nar (ca. 2700-2000 BCE). South of the Bat cemetery, in the flat part of the valley, there are several large circular structures (known historically as « towers ») and remains from both Hafit and Umm an-Nar periods, as well as later periods. Geomorphological mapping of the floodplain, associated with archaeological survey, have identified walls suggesting that during the Umm an-Nar period there was a system of irrigation which controlled flood water. Sedimentological, malacological, C14 dating and micromorphological studies of a 10 m long and 2.5 m high section located 143 m northeast of the Tower 1146 on the left bank of a small tributary of the Wadi Sharsah provide strong argument for the presence of an irrigation system that began before the Hafit period. New C14 datings confirm this hypothesis. Botanical macro-remains collected during the excavation of early Bronze Age structures at Bat further indicate the presence of date palm gardens since the 3rd millenium BCE allowing the cultivation of several crop species, in particular cereals. Most generally the global palaeoenvironmental reconstruction from our data supports a model of a general trend of aridification from Bronze Age to iron Age. Key words : Bronze Age, Holocene, Geomoephology, Micromorphology, Irrigation, Oman.

Determining Prehistoric Mining Practices in Southeastern Europe Using Copper Isotopes

NASA Astrophysics Data System (ADS)

Powell, Wayne; Mathur, Ryan; Bankoff, H. Arthur; Bulatović, Aleksandar; Filipović, Vojislav

2017-04-01

Copper was first smelted from malachite at 5000 BCE in Serbia. There the Eneolithic (Copper Age) began with the production of small jewelry pieces and progressed to the casting of massive copper tools near its end, approximately 2000 years later. However, copper metallurgy in southeastern Europe ceased or significantly decreased in the later third millennium, several centuries before the Bronze Age began. Whether this metallurgical hiatus was the result a cultural shift or depletion of natural resources remains an ongoing subject of debate. It has been speculated that the marked reduction in metal production at the Eneolithic-Bronze Age transition was due to the exhaustion of surficial weathered oxide ores and the technical inability to smelt the underlying sulfide minerals. The behavior of copper isotopes in near-surface environments allows us to differentiate highly weathered oxide ores that occur at Earth's surface from non-weathered sulfide ores that occur at greater depth. The oxidation of copper generates fluids and associated minerals that are enriched in the 65Cu isotope. Thus, oxidative weathering of sulfide ores leads to the development of three stratified isotopic reservoirs for copper: 1) oxides above the water table that are enriched in 65Cu; 2) residual weathered sulfides minerals at the water table that are depleted in 65Cu; and 3) non-fractionated, non-weathered sulfide ore below the water table. And so, the transformative shift to sulfide-based metallurgy will be delineated by a significant decrease in δ65Cu in copper artifacts corresponding to the first use of 65Cu-depleted residual ore. The degree of variability of primary ore composition from numerable ore deposits would likely result in the overlap of copper isotope composition between populations of artifacts. Therefore, shifts in the mean copper isotope values and associated standard deviations would best reflect changes in ores use. A baseline value of -0.2‰ ±0.5 (1) was determined from an average of 164 published measurements from chalcopyrite and bornite from 8 epithermal and massive sulfide deposits. Twenty-two (88%) of Eneolithic artifacts (n=25) have values greater than this, whereas eight (73%) of the Early Bronze age artifacts (n=11) yield compositions less than -0.2‰. The mean of Middle Bronze Age, Late Bronze Age and Early Iron Age (n=86) cluster near -0.2‰. This pattern is consistent with a progression to the mining of ore assemblages from increasing depths through prehistory. The shift from 65Cu-enriched to 65Cu-depleted copper in artifacts across the Eneolithic-Bronze Age boundary at 2500 BCE indicates that accessible near-surface oxide ore reserves were depleted after approximately two millennia of mining, and that the beginning of the Bronze Age in the Balkans corresponded to the acquisition of pyrotechnology which allowed for the extraction of metals from sulfide minerals and the resumption of copper mining activity in the region.

The palaeoenvironmental impact of prehistoric settlement and proto-historic urbanism: tracing the emergence of the Oppidum of Corent, Auvergne, France.

PubMed

Ledger, Paul M; Miras, Yannick; Poux, Matthieu; Milcent, Pierre Yves

2015-01-01

Early human societies and their interactions with the natural world have been extensively explored in palaeoenvironmental studies across Central and Western Europe. Yet, despite an extensive body of scholarship, there is little consideration of the environmental impacts of proto-historic urbanisation. Typically palaeoenvironmental studies of Bronze and Iron Age societies discuss human impact in terms of woodland clearance, landscape openness and evidence for agriculture. Although these features are clearly key indicators of human settlement, and characterise Neolithic and early to Middle Bronze Age impacts at Corent, they do not appear to represent defining features of a protohistoric urban environment. The Late Iron Age Gallic Oppidum of Corent is remarkable for the paucity of evidence for agriculture and strong representation of apophytes associated with disturbance. Increased floristic diversity - a phenomenon also observed in more recent urban environments - was also noted. The same, although somewhat more pronounced, patterns are noted for the Late Bronze Age and hint at the possibility of a nascent urban area. High percentages of pollen from non-native trees such as Platanus, Castanea and Juglans in the late Bronze Age and Gallic period also suggest trade and cultural exchange, notably with the Mediterranean world. Indeed, these findings question the validity of applying Castanea and Juglans as absolute chronological markers of Romanisation. These results clearly indicate the value of local-scale palaeoecological studies and their potential for tracing the phases in the emergence of a proto-historic urban environment.

When was irrigation first used in Bat (Wadi Sharsah, northwestern Oman)?

NASA Astrophysics Data System (ADS)

Fouache, E.; Desruelles, S.; Eddargach, W.; Cammas, C.; Wattez, J.; Martin, C.; Tengberg, M.; Cable, C.; Thornton, C.

2012-04-01

The extensive archaeological site of Bat, registered as a World Heritage Site by UNESCO in 1989, is situated within the Wadi Sharsah and around the modern village and palm grove of Bat, approximately 24 km from the modern city of Ibri in northwestern Oman. The archaeological remains from the Bronze Age excavated by the Bat Archaeological Project are located in two main areas. The northern area consists of a chain of low limestone hills cut by wadi tributaries leading to the main Wadi Sharsah. It is characterised by an exceptionally high density of graves from two successive Bronze Age periods: Hafit (ca. 3100-2700 BCE) and Umm an-Nar (ca. 2700-2000 BCE). South of the Bat cemetery, in the flat part of the valley, there are several large circular structures (known historically as "towers") and remains from both Hafit and Umm an-Nar periods, as well as later periods. Geomorphological mapping of the floodplain, associated with archaeological survey, have identified walls suggesting that during the Umm an-Nar period there was a system of irrigation which controlled flood water. Sedimentological, malacological, C14 dating and micromorphological studies of a 10 m long and 2.5 m high section located 143 m northeast of the Tower 1146 on the left bank of a small tributary of the Wadi Sharsah provide strong arguments for the presence of an irrigation system that began before the Hafit period. Botanical macro-remains collected during the excavation of early Bronze Age structures at Bat further indicate the presence of date palm gardens since the early 3rd millennium BCE allowing the cultivation of several crop species, in particular cereals. Most generally, the global palaeoenvironmental reconstruction from our data supports a model of a general trend of aridification from Bronze to Iron Ages. Key words : Bronze Age, Holocene, Geomorphology, Micromorphology, Irrigation, Oman

78 FR 56832 - Extension of Import Restrictions Imposed on Archaeological Material From Cambodia From the Bronze...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-16

... amended by CBP Dec. 08-40, are due to expire on September 19, 2013, unless extended. The Assistant...: Effective Date: September 19, 2013. FOR FURTHER INFORMATION CONTACT: For legal aspects, Lisa Burley, Cargo... until September 19, 2013, and amended them to include archaeological material from the Bronze Age...

Casting Simulation of an Austrian Bronze Age Sword Hilt

NASA Astrophysics Data System (ADS)

Pola, Annalisa; Mödlinger, Marianne; Piccardo, Paolo; Montesano, Lorenzo

2015-07-01

Bronze Age swords with a metal hilt can be considered the peak of Bronze Age casting technologies. To reconstruct the casting techniques used more than 3000 years ago, a metal hilted sword of the Schalenknauf type from Lower Austria was studied with the aid of macroscopic analyses and simulation of mold filling and casting solidification. A three-dimensional model of the hilt was created based on optical scanner measurements performed on a hilt recently discovered during archaeological excavations. Three different configurations of the gating system were considered, two on the pommel disk and one on the knob, and the effect of its location on the formation of casting defects was investigated. Three-dimensional computed tomography was used to detect internal defects, such as gas and shrinkage porosity, which were then compared with those calculated by simulation. The best match between actual and predicted hilt quality demonstrated the location of the gating system, which turned out to be on the pommel disk.

Comparative modeling of Bronze Age land use in the Malatya Plain (Turkey)

NASA Astrophysics Data System (ADS)

Arıkan, Bülent; Restelli, Francesca Balossi; Masi, Alessia

2016-03-01

Computational modeling in archeology has proven to be a useful tool in quantifying changes in the paleoenvironment. This especially useful method combines data from diverse disciplines to answer questions focusing on the complex and non-linear aspects of human-environment interactions. The research presented here uses various proxy records to compare the changes in climate during the Bronze Age in the Malatya Plain in eastern Anatolia, which is situated at the northern extremity of northern Mesopotamia. Extensive agropastoral land use modeling was applied to three sites of different size and function in the Malatya Plain during the Early Bronze Age I period to simulate the varying scale and intensity of human impacts in relation to changes in the level of social organization, demography, and temporal length. The results suggest that even in land use types subjected to a light footprint, the scale and intensity of anthropogenic impacts change significantly in relation to the level of social organization.

The Palaeoenvironmental Impact of Prehistoric Settlement and Proto-Historic Urbanism: Tracing the Emergence of the Oppidum of Corent, Auvergne, France

PubMed Central

Ledger, Paul M.; Miras, Yannick; Poux, Matthieu; Milcent, Pierre Yves

2015-01-01

Early human societies and their interactions with the natural world have been extensively explored in palaeoenvironmental studies across Central and Western Europe. Yet, despite an extensive body of scholarship, there is little consideration of the environmental impacts of proto-historic urbanisation. Typically palaeoenvironmental studies of Bronze and Iron Age societies discuss human impact in terms of woodland clearance, landscape openness and evidence for agriculture. Although these features are clearly key indicators of human settlement, and characterise Neolithic and early to Middle Bronze Age impacts at Corent, they do not appear to represent defining features of a protohistoric urban environment. The Late Iron Age Gallic Oppidum of Corent is remarkable for the paucity of evidence for agriculture and strong representation of apophytes associated with disturbance. Increased floristic diversity – a phenomenon also observed in more recent urban environments – was also noted. The same, although somewhat more pronounced, patterns are noted for the Late Bronze Age and hint at the possibility of a nascent urban area. High percentages of pollen from non-native trees such as Platanus, Castanea and Juglans in the late Bronze Age and Gallic period also suggest trade and cultural exchange, notably with the Mediterranean world. Indeed, these findings question the validity of applying Castanea and Juglans as absolute chronological markers of Romanisation. These results clearly indicate the value of local-scale palaeoecological studies and their potential for tracing the phases in the emergence of a proto-historic urban environment. PMID:25853251

Bronze Age pottery from the Aeolian Islands: definition of Temper Compositional Reference Units by an integrated mineralogical and microchemical approach

NASA Astrophysics Data System (ADS)

Brunelli, D.; Levi, S. T.; Fragnoli, P.; Renzulli, A.; Santi, P.; Paganelli, E.; Martinelli, M. C.

2013-12-01

An integrated microchemical-petrographic approach is here proposed to discriminate the provenance of archaeological pottery artefacts from distinct production centres. Our study focuses on a statistically significant sampling ( n=186) of volcanic temper-bearing potteries representative of the manufacturing and dispersion among the islands of the Aeolian Archipelago during the Bronze Age. The widespread establishment of new settlements and the abundant recovery of Aeolian-made ceramic in southern Italy attest for the increased vitality of the Archipelago during the Capo Graziano culture (Early Bronze Age-Middle Bronze Age 2; 2300-1430 BC). Potteries from three of the main known ancient communities (Lipari, Filicudi and Stromboli) have been studied integrating old collections and newly excavated material. Volcanic tempers have been first investigated through multivariate analyses of relative abundances of mineral and rock clasts along with petrographic characters. In addition, we performed in-situ mineral chemistry microanalyses by Electron Microprobe and Laser Ablation—Inductively Coupled Plasma Mass Spectrometry to assess major and trace element composition of the most common mineral phases. Four Temper Compositional Reference Units have been recognised based on compositional trends. Two units (AI and AX) are unequivocally distinct by their peculiar trace element enrichment and petrographic composition; they mostly contain samples from the sites of Lipari and Stromboli, respectively. Units AIV and AVIII, restricted to the sites of Filicudi and Stromboli, show distinct petrographic characters but overlapped geochemical fingerprints.

Minoan and Mycenaean medicine and its Near Eastern contacts.

PubMed

Arnott, R

2004-01-01

Few scholars of ancient medicine have considered that Hippocratic practice may be based in part upon the experience and tradition, handed-down from generation to generation, starting before the end of the Bronze Age in 1100 BC. This paper examines the evidence for medical practitioners in the Aegean in the second millennium BC, and of medical contacts between the Aegean and contemporary bronze age societies of Egypt and the Near East at this time, and suggests that some of these contacts may have been the start of Near Eastern influence on Greek medicine.

Corrosion of 85-5-5-5 bronze in natural and synthetic acid rain

NASA Astrophysics Data System (ADS)

Morselli, L.; Bernardi, E.; Chiavari, C.; Brunoro, G.

In order to investigate the decay of bronzes exposed to acid wet depositions, a comparative study has been performed by following the corrosion behaviour of different sets of bronze specimens exposed either to natural rain or to a similar solution, without organic compounds, artificially reproduced in laboratory. The as cast G85 bronze specimens were exposed to aggressive solutions for different periods through a wet-dry technique. The pH trend of the solutions and the amount of metals transferred into the solutions were periodically monitored. OM, SEM, XRD, RAMAN analyses and ac electrochemical measurements were performed on the artificially weathered specimens. Preliminary results, showing the difference between the ageing in natural and synthetic rain, suggest the influence of the organic components on the corrosion process. In particular, the growth of a more uniform protective layer of corrosion products on the metal surface exposed to the natural rain could be attributed to these components.

Divergence in male and female manipulative behaviors with the intensification of metallurgy in Central Europe.

PubMed

Macintosh, Alison A; Pinhasi, Ron; Stock, Jay T

2014-01-01

Humeral morphology has been shown to reflect, in part, habitual manipulative behaviors in humans. Among Central European agricultural populations, long-term social change, increasing task specialization, and technological innovation all had the potential to impact patterns of habitual activity and upper limb asymmetry. However, systematic temporal change in the skeletal morphology of agricultural populations in this region has not been well-characterized. This study investigates diachronic patterns in humeral biomechanical properties and lengths among 174 adult Central European agriculturalists through the first ∼ 5400 years of farming in the region. Greater asymmetry in biomechanical properties was expected to accompany the introduction of metallurgy, particularly in males, while upper limb loading patterns were expected to be more similar between the Bronze and Iron Ages. Results revealed a divergence in the lateralization of upper limb biomechanical properties by sex between the Early/Middle Neolithic and Early/Middle Bronze Age. Neolithic females had significantly more variable properties than males in both humeri, while Bronze Age female properties became homogeneous and very symmetrical relative to the right-biased lateralization of contemporaneous males. The Bronze Age to Iron Age transition was associated with morphological change among females, with a significant increase in right-biased asymmetry and a concomitant reduction in sexual dimorphism. Relative to biomechanical properties, humeral length variation and asymmetry were low though some significant sexual dimorphism and temporal change was found. It was among females that the lateralization of humeral biomechanical properties, and variation within them, changed most profoundly through time. This suggests that the introduction of the ard and plow, metallurgical innovation, task specialization, and socioeconomic change through ∼ 5400 years of agriculture impacted upper limb loading in Central European women to a greater extent than men.

First Paleoparasitological Report on the Animal Feces of Bronze Age Excavated from Shahr-e Sukhteh, Iran.

PubMed

Makki, Mahsasadat; Dupouy-Camet, Jean; Sajjadi, Seyed Mansour Seyed; Naddaf, Saied Reza; Mobedi, Iraj; Rezaeian, Mostafa; Mohebali, Mehdi; Mowlavi, Gholamreza

2017-04-01

Shahr-e Sukhteh (meaning burnt city in Persian) in Iran is an archeological site dated back to around 3,200-1,800 BC. It is located in Sistan and Baluchistan Province of Iran and known as the junction of Bronze Age trade routes crossing the Iranian plateau. It was appointed as current study area for paleoparasitological investigations. Excavations at this site have revealed various archeological materials since 1967. In the present study, sheep and carnivore coprolites excavated from this site were analyzed by means of rehydration technique using TSP solution for finding helminth eggs. Dicrocoelium dendriticum, Capillaria sp., and Taenia sp. eggs were identified, while some other objects similar to Anoplocephalidae and Toxocara spp. eggs were also retrieved from the samples but their measured parameters did not match those of these species. The present paper illustrates the first paleoparasitological findings of Bronze Age in eastern Iran supporting the economic activities, peopling, and communication as well as the appropriate condition for zoonotic helminthiasis life cycle in Shahr-e Sukhteh archeological site.

First Paleoparasitological Report on the Animal Feces of Bronze Age Excavated from Shahr-e Sukhteh, Iran

PubMed Central

Makki, Mahsasadat; Dupouy-Camet, Jean; Sajjadi, Seyed Mansour Seyed; Naddaf, Saied Reza; Mobedi, Iraj; Rezaeian, Mostafa; Mohebali, Mehdi; Mowlavi, Gholamreza

2017-01-01

Shahr-e Sukhteh (meaning burnt city in Persian) in Iran is an archeological site dated back to around 3,200-1,800 BC. It is located in Sistan and Baluchistan Province of Iran and known as the junction of Bronze Age trade routes crossing the Iranian plateau. It was appointed as current study area for paleoparasitological investigations. Excavations at this site have revealed various archeological materials since 1967. In the present study, sheep and carnivore coprolites excavated from this site were analyzed by means of rehydration technique using TSP solution for finding helminth eggs. Dicrocoelium dendriticum, Capillaria sp., and Taenia sp. eggs were identified, while some other objects similar to Anoplocephalidae and Toxocara spp. eggs were also retrieved from the samples but their measured parameters did not match those of these species. The present paper illustrates the first paleoparasitological findings of Bronze Age in eastern Iran supporting the economic activities, peopling, and communication as well as the appropriate condition for zoonotic helminthiasis life cycle in Shahr-e Sukhteh archeological site. PMID:28506043

Environmental Roots of the Late Bronze Age Crisis

PubMed Central

Kaniewski, David; Van Campo, Elise; Guiot, Joël; Le Burel, Sabine; Otto, Thierry; Baeteman, Cecile

2013-01-01

The Late Bronze Age world of the Eastern Mediterranean, a rich linkage of Aegean, Egyptian, Syro-Palestinian, and Hittite civilizations, collapsed famously 3200 years ago and has remained one of the mysteries of the ancient world since the event’s retrieval began in the late 19th century AD/CE. Iconic Egyptian bas-reliefs and graphic hieroglyphic and cuneiform texts portray the proximate cause of the collapse as the invasions of the “Peoples-of-the-Sea” at the Nile Delta, the Turkish coast, and down into the heartlands of Syria and Palestine where armies clashed, famine-ravaged cities abandoned, and countrysides depopulated. Here we report palaeoclimate data from Cyprus for the Late Bronze Age crisis, alongside a radiocarbon-based chronology integrating both archaeological and palaeoclimate proxies, which reveal the effects of abrupt climate change-driven famine and causal linkage with the Sea People invasions in Cyprus and Syria. The statistical analysis of proximate and ultimate features of the sequential collapse reveals the relationships of climate-driven famine, sea-borne-invasion, region-wide warfare, and politico-economic collapse, in whose wake new societies and new ideologies were created. PMID:23967146

Vegetation development in the Middle Euphrates and Upper Jazirah (Syria/Turkey) during the Bronze Age

NASA Astrophysics Data System (ADS)

Deckers, Katleen; Pessin, Hugues

2010-09-01

Vegetation changes are reconstructed based on more than 51,000 charcoal fragments of more than 380 samples from nine Bronze Age sites in northern Syria and southern Turkey. In addition to fragment proportions, special attention was paid to the frequency of Pistacia relative to Quercus and Populus/ Salix relative to Tamarix, fruit-tree ubiquity, and riverine diversity in order to gain an improved understanding of the human versus climatic impact on the vegetation. The results indicate that human impacts first took place within the riverine forest. This phase was followed by land clearing within the woodland steppe, especially in the northern portion of the study area. In the south near Emar, the woodland steppe probably disappeared by the Late Bronze Age. It is uncertain whether this was caused by aridification and/or human clearing. The northward shift of the Pistacia-woodland steppe is very likely a result of climatic drying that occurred throughout the entire period under investigation. Although increased deforestation is evident through time, the small proportions of imported wood indicate that local resources were still available.

Mineral resource of the month: tin

USGS Publications Warehouse

Carlin, James F.

2011-01-01

Tin was one of the earliest-known metals. Because of its hardening effect on copper, tin was used in bronze implements as early as 3500 B.C. Bronze, a copper-tin alloy that can be sharpened and is hard enough to retain a cutting edge, was used during the Bronze Age in construction tools as well as weapons for hunting and war. The geographical separation between tin-producing and tin-consuming nations greatly influenced the patterns of early trade routes. Historians think that as early as 1500 B.C., Phoenicians traveled by sea to the Cornwall district of England to obtain tin. The pure metal was not used unalloyed until about 600 B.C.

Continuity and Admixture in the Last Five Millennia of Levantine History from Ancient Canaanite and Present-Day Lebanese Genome Sequences.

PubMed

Haber, Marc; Doumet-Serhal, Claude; Scheib, Christiana; Xue, Yali; Danecek, Petr; Mezzavilla, Massimo; Youhanna, Sonia; Martiniano, Rui; Prado-Martinez, Javier; Szpak, Michał; Matisoo-Smith, Elizabeth; Schutkowski, Holger; Mikulski, Richard; Zalloua, Pierre; Kivisild, Toomas; Tyler-Smith, Chris

2017-08-03

The Canaanites inhabited the Levant region during the Bronze Age and established a culture that became influential in the Near East and beyond. However, the Canaanites, unlike most other ancient Near Easterners of this period, left few surviving textual records and thus their origin and relationship to ancient and present-day populations remain unclear. In this study, we sequenced five whole genomes from ∼3,700-year-old individuals from the city of Sidon, a major Canaanite city-state on the Eastern Mediterranean coast. We also sequenced the genomes of 99 individuals from present-day Lebanon to catalog modern Levantine genetic diversity. We find that a Bronze Age Canaanite-related ancestry was widespread in the region, shared among urban populations inhabiting the coast (Sidon) and inland populations (Jordan) who likely lived in farming societies or were pastoral nomads. This Canaanite-related ancestry derived from mixture between local Neolithic populations and eastern migrants genetically related to Chalcolithic Iranians. We estimate, using linkage-disequilibrium decay patterns, that admixture occurred 6,600-3,550 years ago, coinciding with recorded massive population movements in Mesopotamia during the mid-Holocene. We show that present-day Lebanese derive most of their ancestry from a Canaanite-related population, which therefore implies substantial genetic continuity in the Levant since at least the Bronze Age. In addition, we find Eurasian ancestry in the Lebanese not present in Bronze Age or earlier Levantines. We estimate that this Eurasian ancestry arrived in the Levant around 3,750-2,170 years ago during a period of successive conquests by distant populations. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

Monumental megalithic burial and rock art tell a new story about the Levant Intermediate Bronze "Dark Ages".

PubMed

Sharon, Gonen; Barash, Alon; Eisenberg-Degen, Davida; Grosman, Leore; Oron, Maya; Berger, Uri

2017-01-01

The Intermediate Bronze Age (IB) in the Southern Levant (ca. 2350-2000 BCE) is known as the "Dark Ages," following the collapse of Early Bronze urban society and predating the establishment of the Middle Bronze cities. The absence of significant settlements and monumental building has led to the reconstruction of IB social organization as that of nomadic, tribal society inhabiting rural villages with no central governmental system. Excavation in the Shamir Dolmen Field (comprising over 400 dolmens) on the western foothills of the Golan Heights was carried out following the discovery of rock art engravings on the ceiling of the central chamber inside one of the largest dolmens ever recorded in the Levant. Excavation of this multi-chambered dolmen, covered by a basalt capstone weighing some 50 tons, revealed a secondary multi-burial (of both adults and children) rarely described in a dolmen context in the Golan. Engraved into the rock ceiling above the multi-burial is a panel of 14 forms composed of a vertical line and downturned arc motif. 3D-scanning by structured-light technology was used to sharpen the forms and revealed the technique employed to create them. Building of the Shamir dolmens required a tremendous amount of labor, architectural mastery, and complex socio-economic organization well beyond the capacity of small, rural nomadic groups. The monumental megalithic burial of the Shamir dolmens indicates a hierarchical, complex, non-urban governmental system. This new evidence supports a growing body of recent criticism stemming from new discoveries and approaches that calls for rethinking our views of the Levantine IB "Dark Ages."

Neurosurgery during the Bronze Age: a skull trepanation in 1900 BC Greece.

PubMed

Papagrigorakis, Manolis J; Toulas, Panagiotis; Tsilivakos, Manolis G; Kousoulis, Antonis A; Skorda, Despoina; Orfanidis, George; Synodinos, Philippos N

2014-02-01

Paleoneurosurgery represents a comparatively new developing direction of neurosurgery dealing with archaeological skull and spine finds and studying their neurosurgical aspects. Trepanation of the cranial vault was a widespread surgical procedure in antiquity and the most convincing evidence of the ancient origin of neurosurgery. The present study considers a case of trepanation from the Middle Bronze Age Greece (1900-1600 B.C.). The skull under study belongs to skeletal material unearthed from Kirra, Delphi (Central Greece). Macroscopic examination and palpation, as well as three-dimensional computed tomography, were used in this study. There is osteological evidence that the skull belongs to a man who died at 30-35 years of age. The procedure of trepanation was performed on the right parietal bone. Both macroscopic and computed tomography evaluation demonstrate an intravital bone reaction at the edges of the aperture. Projected on the right surface of the brain, the trepanation is located on the level of the central groove. The small dimensions and the symmetrical shape of this hole give us an indication that it was made by a metal tool. We conclude that this paleopathological case provides valuable information about the condition of life and the pre-Hippocratic neurosurgical practice in Bronze Age Greece. Copyright © 2014 Elsevier Inc. All rights reserved.

Copper: a metal for the ages

USGS Publications Warehouse

Doebrich, Jeff

2009-01-01

Copper was one of the first metals ever extracted and used by humans, and it has made vital contributions to sustaining and improving society since the dawn of civilization. Copper was first used in coins and ornaments starting about 8000 B.C., and at about 5500 B.C., copper tools helped civilization emerge from the Stone Age. The discovery that copper alloyed with tin produces bronze marked the beginning of the Bronze Age at about 3000 B.C. Copper is easily stretched, molded, and shaped; is resistant to corrosion; and conducts heat and electricity efficiently. As a result, copper was important to early humans and continues to be a material of choice for a variety of domestic, industrial, and high-technology applications today.

Corrosion on prehistoric Cu-Sn-alloys: the influence of artificial environment and storage

NASA Astrophysics Data System (ADS)

Mödlinger, Marianne; Piccardo, Paolo

2013-12-01

The paper contributes to the identification of different corrosion products detected on the cross-section specimens sampled from Bronze Age swords and one helmet found between 60-160 years ago. The objects are kept in 1889 built oak showcases at the Natural History Museum Vienna, having suffered unknown restoration treatments. The identified corrosion products not only affect further eventual treatment in conservation science of copper base objects but also contribute to identify the often unknown find context, which is meant to facilitate archaeological interpretation of the Bronze Age weapons. The analyses of the samples were carried out using SEM-EDXS-EBSD and optical microscopy.

The maternal genetic make-up of the Iberian Peninsula between the Neolithic and the Early Bronze Age.

PubMed

Szécsényi-Nagy, Anna; Roth, Christina; Brandt, Guido; Rihuete-Herrada, Cristina; Tejedor-Rodríguez, Cristina; Held, Petra; García-Martínez-de-Lagrán, Íñigo; Arcusa Magallón, Héctor; Zesch, Stephanie; Knipper, Corina; Bánffy, Eszter; Friederich, Susanne; Meller, Harald; Bueno Ramírez, Primitiva; Barroso Bermejo, Rosa; de Balbín Behrmann, Rodrigo; Herrero-Corral, Ana M; Flores Fernández, Raúl; Alonso Fernández, Carmen; Jiménez Echevarria, Javier; Rindlisbacher, Laura; Oliart, Camila; Fregeiro, María-Inés; Soriano, Ignacio; Vicente, Oriol; Micó, Rafael; Lull, Vicente; Soler Díaz, Jorge; López Padilla, Juan Antonio; Roca de Togores Muñoz, Consuelo; Hernández Pérez, Mauro S; Jover Maestre, Francisco Javier; Lomba Maurandi, Joaquín; Avilés Fernández, Azucena; Lillios, Katina T; Silva, Ana Maria; Magalhães Ramalho, Miguel; Oosterbeek, Luiz Miguel; Cunha, Claudia; Waterman, Anna J; Roig Buxó, Jordi; Martínez, Andrés; Ponce Martínez, Juana; Hunt Ortiz, Mark; Mejías-García, Juan Carlos; Pecero Espín, Juan Carlos; Cruz-Auñón Briones, Rosario; Tomé, Tiago; Carmona Ballestero, Eduardo; Cardoso, João Luís; Araújo, Ana Cristina; Liesau von Lettow-Vorbeck, Corina; Blasco Bosqued, Concepción; Ríos Mendoza, Patricia; Pujante, Ana; Royo-Guillén, José I; Esquembre Beviá, Marco Aurelio; Dos Santos Goncalves, Victor Manuel; Parreira, Rui; Morán Hernández, Elena; Méndez Izquierdo, Elena; Vega Y Miguel, Jorge; Menduiña García, Roberto; Martínez Calvo, Victoria; López Jiménez, Oscar; Krause, Johannes; Pichler, Sandra L; Garrido-Pena, Rafael; Kunst, Michael; Risch, Roberto; Rojo-Guerra, Manuel A; Haak, Wolfgang; Alt, Kurt W

2017-11-15

Agriculture first reached the Iberian Peninsula around 5700 BCE. However, little is known about the genetic structure and changes of prehistoric populations in different geographic areas of Iberia. In our study, we focus on the maternal genetic makeup of the Neolithic (~ 5500-3000 BCE), Chalcolithic (~ 3000-2200 BCE) and Early Bronze Age (~ 2200-1500 BCE). We report ancient mitochondrial DNA results of 213 individuals (151 HVS-I sequences) from the northeast, central, southeast and southwest regions and thus on the largest archaeogenetic dataset from the Peninsula to date. Similar to other parts of Europe, we observe a discontinuity between hunter-gatherers and the first farmers of the Neolithic. During the subsequent periods, we detect regional continuity of Early Neolithic lineages across Iberia, however the genetic contribution of hunter-gatherers is generally higher than in other parts of Europe and varies regionally. In contrast to ancient DNA findings from Central Europe, we do not observe a major turnover in the mtDNA record of the Iberian Late Chalcolithic and Early Bronze Age, suggesting that the population history of the Iberian Peninsula is distinct in character.

Economic and social activities on ancient Cypriot terraced landscapes.

PubMed

Ridder, Elizabeth; Galletti, Christopher S; Fall, Patricia L; Falconer, Steven E

2017-11-01

We investigate ancient agricultural terraces and their associated social and economic activities across the site complex consisting of the village at Politiko-Troullia and its more extensive associated taskscape. Surface artifact distributions mapped over 12 ha are integrated with evidence excavated from this Bronze Age settlement in central Cyprus. Contrary to expectations, artifact densities do not diminish with distance from the village architecture. In particular, concentrations of Prehistoric Bronze Age ceramics and ground stone artifacts are most pronounced on nearby terraced hillsides. These terraces were not utilized for domestic structures, but for extensive processing of agricultural crops and copper ore. Bronze Age excavated plant remains indicate cultivation of olives, grapes and figs, with wood resources dominated by olive and pine. Larger, non-portable ground stones and gaming stones are associated with communal social and economic activities in open courtyard settings in Politiko-Troullia. This category of ground stone also is particularly common on the terraced hillsides around Troullia, suggesting that similar behaviors occurred beyond village structures. The terraced landscape of Politiko-Troullia exemplifies a multi-faceted taskscape with a range of agricultural, metallurgical and social activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

An Energy-Dispersive X-Ray Fluorescence Spectrometry and Monte Carlo simulation study of Iron-Age Nuragic small bronzes ("Navicelle") from Sardinia, Italy

NASA Astrophysics Data System (ADS)

Schiavon, Nick; de Palmas, Anna; Bulla, Claudio; Piga, Giampaolo; Brunetti, Antonio

2016-09-01

A spectrometric protocol combining Energy Dispersive X-Ray Fluorescence Spectrometry with Monte Carlo simulations of experimental spectra using the XRMC code package has been applied for the first time to characterize the elemental composition of a series of famous Iron Age small scale archaeological bronze replicas of ships (known as the ;Navicelle;) from the Nuragic civilization in Sardinia, Italy. The proposed protocol is a useful, nondestructive and fast analytical tool for Cultural Heritage sample. In Monte Carlo simulations, each sample was modeled as a multilayered object composed by two or three layers depending on the sample: when all present, the three layers are the original bronze substrate, the surface corrosion patina and an outermost protective layer (Paraloid) applied during past restorations. Monte Carlo simulations were able to account for the presence of the patina/corrosion layer as well as the presence of the Paraloid protective layer. It also accounted for the roughness effect commonly found at the surface of corroded metal archaeological artifacts. In this respect, the Monte Carlo simulation approach adopted here was, to the best of our knowledge, unique and enabled to determine the bronze alloy composition together with the thickness of the surface layers without the need for previously removing the surface patinas, a process potentially threatening preservation of precious archaeological/artistic artifacts for future generations.

Solar Orientations of Bronze Age Shrines in Gournia, Crete

NASA Astrophysics Data System (ADS)

Henriksson, G.; Blomberg, M.

2009-08-01

The measurements of orientations at Gournia are part of the Uppsala University project to investigate the nature of Minoan astronomy. The town is typical of Minoan settlements and therefore was chosen for the selection of representative buildings from different kinds of Minoan sites. We use classical archaeoastronomical methods and our own computer programs for calculation of the positions of the sun, moon and stars in the Aegean Bronze Age. We discovered that Gournia is the fourth Minoan site with shrines that are oriented to sunrise at lunar month intervals with respect to the equinoxes. There is also a Mycenaean shrine in the town and we compared its orientation to Mycenaean buildings of the same type in Crete.

Geoscience rediscovers Phoenicia's buried harbors

NASA Astrophysics Data System (ADS)

Marriner, Nick; Morhange, Christophe; Doumet-Serhal, Claude; Carbonel, Pierre

2006-01-01

After centuries of archaeological debate, the harbors of Phoenicia's two most important city states, Tyre and Sidon, have been rediscovered, and including new geoarcheological results reveal how, where, and when they evolved after their Bronze Age foundations. The early ports lie beneath their present urban centers, and we have indentified four harbor phases. (1) During the Bronze Age, Tyre and Sidon were characterized by semi-open marine coves that served as protoharbors. (2) Biostratigraphic and lithostratigraphic data indicate the presence of early artificial basins after the first millennium B.C. (3) The harbors reached their apogees during the Greco-Roman and Byzantine periods. (4) Silting up and coastal progradation led to burial of the medieval basins, lost until now.

Monumental megalithic burial and rock art tell a new story about the Levant Intermediate Bronze “Dark Ages”

PubMed Central

Barash, Alon; Eisenberg-Degen, Davida; Grosman, Leore; Oron, Maya; Berger, Uri

2017-01-01

The Intermediate Bronze Age (IB) in the Southern Levant (ca. 2350–2000 BCE) is known as the “Dark Ages,” following the collapse of Early Bronze urban society and predating the establishment of the Middle Bronze cities. The absence of significant settlements and monumental building has led to the reconstruction of IB social organization as that of nomadic, tribal society inhabiting rural villages with no central governmental system. Excavation in the Shamir Dolmen Field (comprising over 400 dolmens) on the western foothills of the Golan Heights was carried out following the discovery of rock art engravings on the ceiling of the central chamber inside one of the largest dolmens ever recorded in the Levant. Excavation of this multi-chambered dolmen, covered by a basalt capstone weighing some 50 tons, revealed a secondary multi-burial (of both adults and children) rarely described in a dolmen context in the Golan. Engraved into the rock ceiling above the multi-burial is a panel of 14 forms composed of a vertical line and downturned arc motif. 3D-scanning by structured-light technology was used to sharpen the forms and revealed the technique employed to create them. Building of the Shamir dolmens required a tremendous amount of labor, architectural mastery, and complex socio-economic organization well beyond the capacity of small, rural nomadic groups. The monumental megalithic burial of the Shamir dolmens indicates a hierarchical, complex, non-urban governmental system. This new evidence supports a growing body of recent criticism stemming from new discoveries and approaches that calls for rethinking our views of the Levantine IB “Dark Ages.” PMID:28253312

Agricultural production and stability of settlement systems in Upper Mesopotamia during the Early Bronze Age (third millennium BCE)

NASA Astrophysics Data System (ADS)

Kalayci, Tuna

This study investigates the relationship between rainfall variation and rain-fed agricultural production in Upper Mesopotamia with a specific focus on Early Bronze Age urban settlements. In return, the variation in production is used to explore stability of urban settlement systems. The organization of the flow of agricultural goods is the key to sustaining the total settlement system. The vulnerability of a settlement system increases due to the increased demand for more output from agricultural lands. This demand is the key for the success of urbanization project. However, without estimating how many foodstuffs were available at the end of a production cycle, further discussions on the forces that shaped and sustained urban settlement systems will be lacking. While large scale fluctuations in the flow of agricultural products between settlements are not the only determinants of hierarchical structures, the total available agricultural yield for each urban settlement in a hierarchy must have influenced settlement relations. As for the methodology, first, Early Bronze Age precipitation levels are estimated by using modern day associations between the eastern Mediterranean coastal areas and the inner regions of Upper Mesopotamia. Next, these levels are integrated into a remote-sensing based biological growth model. Also, a CORONA satellite imagery based archaeological survey is conducted in order to map the Early Bronze Age settlement system in its entirety as well as the ancient markers of agricultural intensification. Finally, ancient agricultural production landscapes are modeled in a GIS. The study takes a critical position towards the traditionally held assumption that large urban settlements (cities) in Upper Mesopotamia were in a state of constant demand for food. The results from this study also suggest that when variations in ancient precipitation levels are translated into the variations in production levels, the impact of climatic aridification on ancient settlement systems becomes less visible in the archaeological record.

Dating the End of the Greek Bronze Age: A Robust Radiocarbon-Based Chronology from Assiros Toumba

PubMed Central

Wardle, Kenneth; Higham, Thomas; Kromer, Bernd

2014-01-01

Over 60 recent analyses of animal bones, plant remains, and building timbers from Assiros in northern Greece form an unique series from the 14th to the 10th century BC. With the exception of Thera, the number of 14C determinations from other Late Bronze Age sites in Greece has been small and their contribution to chronologies minimal. The absolute dates determined for Assiros through Bayesian modelling are both consistent and unexpected, since they are systematically earlier than the conventional chronologies of southern Greece by between 70 and 100 years. They have not been skewed by reference to assumed historical dates used as priors. They support high rather than low Iron Age chronologies from Spain to Israel where the merits of each are fiercely debated but remain unresolved. PMID:25222862

Origin of the mysterious Yin-Shang bronzes in China indicated by lead isotopes.

PubMed

Sun, Wei-dong; Zhang, Li-peng; Guo, Jia; Li, Cong-ying; Jiang, Yu-hang; Zartman, Robert E; Zhang, Zhao-feng

2016-03-18

Fine Yin-Shang bronzes containing lead with puzzlingly highly radiogenic isotopic compositions appeared suddenly in the alluvial plain of the Yellow River around 1400 BC. The Tongkuangyu copper deposit in central China is known to have lead isotopic compositions even more radiogenic and scattered than those of the Yin-Shang bronzes. Most of the Yin-Shang bronzes are tin-copper alloys with high lead contents. The low lead and tin concentrations, together with the less radiogenic lead isotopes of bronzes in an ancient smelting site nearby, however, exclude Tongkuangyu as the sole supplier of the Yin-Shang bronzes. Interestingly, tin ingots/prills and bronzes found in Africa also have highly radiogenic lead isotopes, but it remains mysterious as to how such African bronzes may have been transported to China. Nevertheless, these African bronzes are the only bronzes outside China so far reported that have lead isotopes similar to those of the Yin-Shang bronzes. All these radiogenic lead isotopes plot along ~2.0-2.5 Ga isochron lines, implying that deposits around Archean cratons are the most likely candidates for the sources. African cratons along the Nile and even micro-cratons in the Sahara desert may have similar lead signatures. These places were probably accessible by ancient civilizations, and thus are the most favorable suppliers of the bronzes.

75 FR 14257 - Pricing for Bronze Medals

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... DEPARTMENT OF THE TREASURY United States Mint Pricing for Bronze Medals AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of the 1\\5/16\\- inch bronze medals, 1\\1/2\\-inch bronze medals and three-inch bronze medals. Beginning March...

Corrosion investigation of fire-gilded bronze involving high surface resolution spectroscopic imaging

NASA Astrophysics Data System (ADS)

Masi, G.; Chiavari, C.; Avila, J.; Esvan, J.; Raffo, S.; Bignozzi, M. C.; Asensio, M. C.; Robbiola, L.; Martini, C.

2016-03-01

Gilded bronzes are often affected by severe corrosion, due to defects in the Au layer and Au/Cu alloy galvanic coupling, stimulated by large cathodic area of the gilded layer. Galvanic corrosion, triggered by gilding defects, leads to products growth at the Au/bronze interface, inducing blistering or break-up of the Au layer. In this context, fire-gilded bronze replicas prepared by ancient methods (use of spreadable Au-Hg paste) was specifically characterised by compiling complementary spectroscopic and imaging information before/after accelerated ageing with synthetic rain. Fire-gilded bronze samples were chemically imaged in cross-section at nano-metric scale (<200 nm) using high energy and lateral resolution synchrotron radiation photoemission (HR-SRPES) of core levels and valence band after conventional characterisation of the samples by Glow Discharge optical Emission Spectroscopy (GD-OES) and conventional X-ray photoelectron spectroscopy (XPS). We have found a net surface enrichment in Zn and Sn after fire-gilding and presence of metallic Hg, Pb and Cu within the Au layer. Moreover, the composition distribution of the elements together with their oxidation has been determined. It was also revealed that metallic phases including Hg and Pb remain in the gilding after corrosion. Moreover, selective dissolution of Zn and Cu occurs in the crater due to galvanic coupling, which locally induces relative Sn species enrichment (decuprification). The feasibility advantages and disadvantages of chemical imaging using HR-SRPES to study artworks have been investigated on representative replicas.

Origin of the mysterious Yin-Shang bronzes in China indicated by lead isotopes

PubMed Central

Sun, Wei-dong; Zhang, Li-peng; Guo, Jia; Li, Cong-ying; Jiang, Yu-hang; Zartman, Robert E.; Zhang, Zhao-feng

2016-01-01

Fine Yin-Shang bronzes containing lead with puzzlingly highly radiogenic isotopic compositions appeared suddenly in the alluvial plain of the Yellow River around 1400 BC. The Tongkuangyu copper deposit in central China is known to have lead isotopic compositions even more radiogenic and scattered than those of the Yin-Shang bronzes. Most of the Yin-Shang bronzes are tin-copper alloys with high lead contents. The low lead and tin concentrations, together with the less radiogenic lead isotopes of bronzes in an ancient smelting site nearby, however, exclude Tongkuangyu as the sole supplier of the Yin-Shang bronzes. Interestingly, tin ingots/prills and bronzes found in Africa also have highly radiogenic lead isotopes, but it remains mysterious as to how such African bronzes may have been transported to China. Nevertheless, these African bronzes are the only bronzes outside China so far reported that have lead isotopes similar to those of the Yin-Shang bronzes. All these radiogenic lead isotopes plot along ~2.0–2.5 Ga isochron lines, implying that deposits around Archean cratons are the most likely candidates for the sources. African cratons along the Nile and even micro-cratons in the Sahara desert may have similar lead signatures. These places were probably accessible by ancient civilizations, and thus are the most favorable suppliers of the bronzes. PMID:26988425

Prehistoric contacts over the Straits of Gibraltar indicated by genetic analysis of Iberian Bronze Age cattle

PubMed Central

Anderung, Cecilia; Bouwman, Abigail; Persson, Per; Carretero, José Miguel; Ortega, Ana Isabel; Elburg, Rengert; Smith, Colin; Arsuaga, Juan Luis; Ellegren, Hans; Götherström, Anders

2005-01-01

The geographic situation of the Iberian Peninsula makes it a natural link between Europe and North Africa. However, it is a matter of debate to what extent African influences via the Straits Gibraltar have affected Iberia's prehistoric development. Because early African pastoralist communities were dedicated to cattle breeding, a possible means to detect prehistoric African–Iberian contacts might be to analyze the origin of cattle breeds on the Iberian Peninsula. Some contemporary Iberian cattle breeds show a mtDNA haplotype, T1, that is characteristic to African breeds, generally explained as being the result of the Muslim expansion of the 8th century A.D., and of modern imports. To test a possible earlier African influence, we analyzed mtDNA of Bronze Age cattle from the Portalón cave at the Atapuerca site in northern Spain. Although the majority of samples showed the haplotype T3 that dominates among European breeds of today, the T1 haplotype was found in one specimen radiocarbon dated 1800 calibrated years B.C. Accepting T1 as being of African origin, this result indicates prehistoric African–Iberian contacts and lends support to archaeological finds linking early African and Iberian cultures. We also found a wild ox haplotype in the Iberian Bronze Age sample, reflecting local hybridization or backcrossing or that aurochs were hunted by these farming cultures. PMID:15941827

The sun, moon and stars of the southern Levant at Gezer and Megiddo: Cultural astronomy in Chalcolithic/Early and Middle Bronze Ages

NASA Astrophysics Data System (ADS)

Gardner, Sara Lee

Astronomical images are found on monumental structures and decorative art, and metaphorically in seasonal myths, and are documented by calendars. In Israel and the southern Levant, images of the sun, the moon, and the stars were common decorating motifs. They were found on walls, pottery, and seals and date to as early as the Chalcolithic period; for example, the wall painting of a star at Teleilat Ghassul (North 1961). This dissertation establishes that the people of the Levant were aware of the apparent movement of the sun, and this will be discussed in Chapter 4. They began recording through representation drawings, astronomical phenomena no later than the Chalcolithic/Early Bronze Age and continued to do so late into the Middle Bronze Age. The argument moves beyond the simple use of symbols to the use of images to represent constellations, with the focus on the constellation Leo in Chapter 5. Furthermore, the use of astronomy as a power and political tool is also suggested in Chapter 6. Nonetheless, the primary purpose that is addressed here is the tendency in Syro-Palestinian archaeology has been to attribute technological evidence found in the northern and southern Levant as diffused from Egypt or Assyria, particularly astronomy. This dissertation firmly establishes that astronomy was used in the southern Levant before any significant contact with the civilizations of Egypt or Assyria.

Genome flux and stasis in a five millennium transect of European prehistory

PubMed Central

Gamba, Cristina; Jones, Eppie R.; Teasdale, Matthew D.; McLaughlin, Russell L.; Gonzalez-Fortes, Gloria; Mattiangeli, Valeria; Domboróczki, László; Kővári, Ivett; Pap, Ildikó; Anders, Alexandra; Whittle, Alasdair; Dani, János; Raczky, Pál; Higham, Thomas F. G.; Hofreiter, Michael; Bradley, Daniel G; Pinhasi, Ron

2014-01-01

The Great Hungarian Plain was a crossroads of cultural transformations that have shaped European prehistory. Here we analyse a 5,000-year transect of human genomes, sampled from petrous bones giving consistently excellent endogenous DNA yields, from 13 Hungarian Neolithic, Copper, Bronze and Iron Age burials including two to high (~22 × ) and seven to ~1 × coverage, to investigate the impact of these on Europe’s genetic landscape. These data suggest genomic shifts with the advent of the Neolithic, Bronze and Iron Ages, with interleaved periods of genome stability. The earliest Neolithic context genome shows a European hunter-gatherer genetic signature and a restricted ancestral population size, suggesting direct contact between cultures after the arrival of the first farmers into Europe. The latest, Iron Age, sample reveals an eastern genomic influence concordant with introduced Steppe burial rites. We observe transition towards lighter pigmentation and surprisingly, no Neolithic presence of lactase persistence. PMID:25334030

Genome flux and stasis in a five millennium transect of European prehistory.

PubMed

Gamba, Cristina; Jones, Eppie R; Teasdale, Matthew D; McLaughlin, Russell L; Gonzalez-Fortes, Gloria; Mattiangeli, Valeria; Domboróczki, László; Kővári, Ivett; Pap, Ildikó; Anders, Alexandra; Whittle, Alasdair; Dani, János; Raczky, Pál; Higham, Thomas F G; Hofreiter, Michael; Bradley, Daniel G; Pinhasi, Ron

2014-10-21

The Great Hungarian Plain was a crossroads of cultural transformations that have shaped European prehistory. Here we analyse a 5,000-year transect of human genomes, sampled from petrous bones giving consistently excellent endogenous DNA yields, from 13 Hungarian Neolithic, Copper, Bronze and Iron Age burials including two to high (~22 × ) and seven to ~1 × coverage, to investigate the impact of these on Europe's genetic landscape. These data suggest genomic shifts with the advent of the Neolithic, Bronze and Iron Ages, with interleaved periods of genome stability. The earliest Neolithic context genome shows a European hunter-gatherer genetic signature and a restricted ancestral population size, suggesting direct contact between cultures after the arrival of the first farmers into Europe. The latest, Iron Age, sample reveals an eastern genomic influence concordant with introduced Steppe burial rites. We observe transition towards lighter pigmentation and surprisingly, no Neolithic presence of lactase persistence.

Early atmospheric metal pollution provides evidence for Chalcolithic/Bronze Age mining and metallurgy in Southwestern Europe.

PubMed

Martínez Cortizas, Antonio; López-Merino, Lourdes; Bindler, Richard; Mighall, Tim; Kylander, Malin E

2016-03-01

Although archaeological research suggests that mining/metallurgy already started in the Chalcolithic (3rd millennium BC), the earliest atmospheric metal pollution in SW Europe has thus far been dated to ~3500-3200 cal.yr. BP in paleo-environmental archives. A low intensity, non-extensive mining/metallurgy and the lack of appropriately located archives may be responsible for this mismatch. We have analysed the older section (>2100 cal.yr. BP) of a peat record from La Molina (Asturias, Spain), a mire located in the proximity (35-100 km) of mines which were exploited in the Chalcolithic/Bronze Age, with the aim of assessing evidence of this early mining/metallurgy. Analyses included the determination of C as a proxy for organic matter content, lithogenic elements (Si, Al, Ti) as markers of mineral matter, and trace metals (Cr, Cu, Zn, Pb) and stable Pb isotopes as tracers of atmospheric metal pollution. From ~8000 to ~4980 cal.yr. BP the Pb composition is similar to that of the underlying sediments (Pb 15 ± 4 μg g(-1); (206)Pb/(207)Pb 1.204 ± 0.002). A sustained period of low (206)Pb/(207)Pb ratios occurred from ~4980 to ~2470 cal.yr. BP, which can be divided into four phases: Chalcolithic (~4980-3700 cal.yr. BP), (206)Pb/(207)Pb ratios decline to 1.175 and Pb/Al ratios increase; Early Bronze Age (~3700-3500 cal.yr. BP), (206)Pb/(207)Pb increase to 1.192 and metal/Al ratios remain stable; Late Bronze Age (~3500-2800 cal.yr. BP), (206)Pb/(207)Pb decline to their lowest values (1.167) while Pb/Al and Zn/Al increase; and Early Iron Age (~2800-2470 cal.yr. BP), (206)Pb/(207)Pb increase to 1.186, most metal/Al ratios decrease but Zn/Al shows a peak. At the beginning of the Late Iron Age, (206)Pb/(207)Pb ratios and metal enrichments show a rapid return to pre-anthropogenic values. These results provide evidence of regional/local atmospheric metal pollution triggered by the earliest phases of mining/metallurgy in the area, and reconcile paleo-environmental and archaeological records. Copyright © 2016. Published by Elsevier B.V.

Like a pig out of water: seaborne spread of domestic pigs in Southern Italy and Sardinia during the Bronze and Iron Ages.

PubMed

Lega, C; Fulgione, D; Genovese, A; Rook, L; Masseti, M; Meiri, M; Cinzia Marra, A; Carotenuto, F; Raia, P

2017-02-01

Southern Italy has a long history of human occupation and passage of different cultures since the Early Holocene. Repeated, ancient introductions of pigs in several geographic areas in Europe make it difficult to understand pig translocation and domestication in Italy. The archeozoological record may provide fundamental information on this, hence shedding light on peopling and on trading among different ancient cultures in the Mediterranean. Yet, because of the scanty nature of the fossil record, ancient remains from human-associated animals are somewhat rare. Fortunately, ancient DNA analysis as applied to domestic species proved to be a powerful tool in revealing human migrations. Herein, we analyzed 80-bp fragment of mitochondrial DNA control region from 27 Sus scrofa ancient samples retrieved from Southern Italian and Sardinian archeological sites, spanning in age from the Mesolithic to the Roman period. Our results surprisingly indicate the presence of the Near Eastern haplotype Y1 on both Italy's major islands (Sardinia and Sicily) during the Bronze Age, suggesting the seaborne transportation of domestic pigs by humans at least during 1600-1300 BC. The presence of the Italian E2 clade in domestic contexts shows that the indigenous wild boar was effectively domesticated or incorporated into domestic stocks in Southern Italy during the Bronze Age, although the E2 haplotype has never been found in modern domestic breeds. Pigs belonging to the endemic E2 clade were thus traded between the Peninsula and Sardinia by the end of the second millennium BC and this genetic signature is still detected in Sardinian feral pigs.

Will the Liberal Arts Survive the Bronze Age of American Academe?

ERIC Educational Resources Information Center

Kimball, Bruce A.

2015-01-01

Kimball begins this essay by comparing the start of the "golden age" of liberal arts education as the period between about 1950 and 1975 when American higher education's revenue and enrollments of colleges and universities grew enormously. During the subsequent silver age of academe, ending in the Great Recession of 2008-2009,…

Non-destructive analysis of ancient bimetal swords from western Asia by γ-ray radiography and X-ray fluorescence

NASA Astrophysics Data System (ADS)

Shizuma, Kiyoshi; Kajimoto, Tsuyoshi; Endo, Satoru; Matsugi, Kazuhiro; Arimatsu, Yui; Nojima, Hisashi

2017-09-01

Eight ancient bimetal swords held by Hiroshima University, Japan were analyzed non-destructively through γ-ray radiography and X-ray fluorescence (XRF). 137Cs and 60Co γ-ray irradiation sources were used to obtain transmission images of swords. A scanning radiography method using a 60Co γ-ray source was developed. XRF was used for qualitative elemental analysis of the swords. The presence of iron cores in the hilts of some swords had been observed and it was assumed that the cores were a ritual symbol or had a functional purpose. However, our work reveals that these swords were originally bronze-hilted iron swords and that the rusty blades were replaced with bronze blades to maintain the swords' commercial value as an antique. Consequently, the rest of the iron blade was left in the hilt as an iron tang. The junction of the blade and the guard was soldered and painted to match the patina color. XRF analysis clearly showed that the elemental Sn/Cu ratios of the blades and the hilts were different. These findings are useful for clarifying the later modifications of the swords and are important for interpreting Bronze Age and Iron Age history correctly.

Animal exploitation in northeast Tibetan Plateau during Neolithic-Bronze Age

NASA Astrophysics Data System (ADS)

Dong, Guanghui; Ren, Lele; Li, Zhipeng; Zhang, Dongju; Chen, Fahu

2017-04-01

The history and driving force for prehistoric human occupation of the Tibetan Plateau has been intensively concerned in recent years. Multidisciplinary studies reveal that human extensively and year-roundly settled below 2500 m asl in northeast Tibetan Plateau (NETP) since 5200BP mainly with the utilization of millet crops, and above 3000 m asl post 3600BP primarily with cold-tolerant barley. However, the strategy for human animal utilization during Neolithic and Bronze periods in NETP still remains enigmatic. We collected and identified hundreds of animal bones from 14 Neolithic and Bronze sites in NETP, with the application of radiocarbon dating, carbon and nitrogen isotopes analysis, and ancient DNA analysis, we explore the changing patterns of animal utilization, and potential human behaviours for taming wild animals in this area throughout late prehistoric times. These works shed lights for understanding when and how husbandry and pastoral economies emerged, and how prehistoric human adapted to the high-cold environment of the Tibetan Plateau..

Inferring genealogical processes from patterns of Bronze-Age and modern DNA variation in Sardinia.

PubMed

Ghirotto, Silvia; Mona, Stefano; Benazzo, Andrea; Paparazzo, Francesco; Caramelli, David; Barbujani, Guido

2010-04-01

The ancient inhabitants of a region are often regarded as ancestral, and hence genetically related, to the modern dwellers (for instance, in studies of admixture), but so far, this assumption has not been tested empirically using ancient DNA data. We studied mitochondrial DNA (mtDNA) variation in Sardinia, across a time span of 2,500 years, comparing 23 Bronze-Age (nuragic) mtDNA sequences with those of 254 modern individuals from two regions, Ogliastra (a likely genetic isolate) and Gallura, and considering the possible impact of gene flow from mainland Italy. To understand the genealogical relationships between past and present populations, we developed seven explicit demographic models; we tested whether these models can account for the levels and patterns of genetic diversity in the data and which one does it best. Extensive simulation based on a serial coalescent algorithm allowed us to compare the posterior probability of each model and estimate the relevant evolutionary (mutation and migration rates) and demographic (effective population sizes, times since population splits) parameters, by approximate Bayesian computations. We then validated the analyses by investigating how well parameters estimated from the simulated data can reproduce the observed data set. We show that a direct genealogical continuity between Bronze-Age Sardinians and the current people of Ogliastra, but not Gallura, has a much higher probability than any alternative scenarios and that genetic diversity in Gallura evolved largely independently, owing in part to gene flow from the mainland.

Lithospheric structure, composition, and thermal regime of the East European Craton: Implications for the subsidence of the Russian platform

USGS Publications Warehouse

Artemieva, I.M.

2003-01-01

A new mechanism for Paleozoic subsidence of the Russian, or East European, platform is suggested, since a model of lithosphere tilting during the Uralian subduction does not explain the post-Uralian sedimentation record. Alternatively, I propose that the Proterozoic and Paleozoic rifting (when a platform-scale Central Russia rift system and a set of Paleozoic rifts were formed) modified the structure and composition of cratonic lithosphere, and these tectono-magmatic events are responsible for the post-Uralian subsidence of the Russian platform. To support this hypothesis, (a) the thermal regime and the thickness of the lithosphere are analyzed, and (b) lithospheric density variations of non-thermal origin are calculated from free-board constraints. The results indicate that Proterozoic and Paleozoic rifting had different effects on the lithospheric structure and composition. (1) Proterozoic rifting is not reflected in the present thermal regime and did not cause significant lithosphere thinning (most of the Russian platform has lithospheric thickness of 150-180 km and the lithosphere of the NE Baltic Shield is 250-300 km thick). Paleozoic rifting resulted in pronounced lithospheric thinning (to 120-140 km) in the southern parts of the Russian platform. (2) Lithospheric density anomalies suggest that Proterozoic-Paleozoic rifting played an important role in the platform subsidence. The lithospheric mantle of the Archean-early Proterozoic part of the Baltic Shield is ??? 1.4 ?? 0.2% less dense than the typical Phanerozoic upper mantle. However, the density deficit in the subcrustal lithosphere of most of the Russian platform is only about (0.4-0.8) ?? 0.2% and decreases southwards to ???0%. Increased densities (likely associated with low depletion values) in the Russian platform suggest strong metasomatism of the cratonic lithosphere during rifting events, which led to its subsidence. It is proposed that only the lower part of the cratonic lithosphere was metasomatized as a result of Proterozoic rifting; the boundary between a depleted upper and more fertile lower layers can be at ca. 90-150 km depth and can produce a seismic pattern similar to the top of a seismic low-velocity zone. Paleozoic rifting has modified the entire lithospheric column and the regions affected are still subsiding. Published by Elsevier B.V.

48 CFR 252.216-7007 - Economic price adjustment-basic steel, aluminum, brass, bronze, or copper mill products...

Code of Federal Regulations, 2012 CFR

2012-10-01

...-basic steel, aluminum, brass, bronze, or copper mill products-representation. 252.216-7007 Section 252....216-7007 Economic price adjustment—basic steel, aluminum, brass, bronze, or copper mill products... Steel, Aluminum, Brass, Bronze, or Copper Mill Products—Representation (MAR 2012) (a) Definitions. The...

48 CFR 252.216-7007 - Economic price adjustment-basic steel, aluminum, brass, bronze, or copper mill products...

Code of Federal Regulations, 2013 CFR

2013-10-01

...-basic steel, aluminum, brass, bronze, or copper mill products-representation. 252.216-7007 Section 252....216-7007 Economic price adjustment—basic steel, aluminum, brass, bronze, or copper mill products... Steel, Aluminum, Brass, Bronze, or Copper Mill Products—Representation (MAR 2012) (a) Definitions. The...

48 CFR 252.216-7007 - Economic price adjustment-basic steel, aluminum, brass, bronze, or copper mill products...

Code of Federal Regulations, 2014 CFR

2014-10-01

...-basic steel, aluminum, brass, bronze, or copper mill products-representation. 252.216-7007 Section 252....216-7007 Economic price adjustment—basic steel, aluminum, brass, bronze, or copper mill products... Steel, Aluminum, Brass, Bronze, or Copper Mill Products—Representation (MAR 2012) (a) Definitions. The...

Parkerite and bismutohauchecornite in chromitites of the Urals: Example of the Uralian Emerald Mines

NASA Astrophysics Data System (ADS)

Koroteev, V. A.; Popov, M. P.; Erokhin, Yu. V.; Khiller, V. V.

2017-04-01

An unusual ore mineralization represented by parkerite, millerite, bismutohauchecornite, bismuthinite, and nickeline was registered in altered chromitite from the Mariinsk emerald-beryllium deposit. Such mineralization is typical of Cu-Ni sulfide ores and hydrothermal veins from the five-element formation. This mineral assemblage was not registered in ophiolitic ultrabasic rocks and related chromitites. The find of bismutohauchecornite is the first in the Urals; the find of parkerite is the third.

Like a pig out of water: seaborne spread of domestic pigs in Southern Italy and Sardinia during the Bronze and Iron Ages

PubMed Central

Lega, C; Fulgione, D; Genovese, A; Rook, L; Masseti, M; Meiri, M; Cinzia Marra, A; Carotenuto, F; Raia, P

2017-01-01

Southern Italy has a long history of human occupation and passage of different cultures since the Early Holocene. Repeated, ancient introductions of pigs in several geographic areas in Europe make it difficult to understand pig translocation and domestication in Italy. The archeozoological record may provide fundamental information on this, hence shedding light on peopling and on trading among different ancient cultures in the Mediterranean. Yet, because of the scanty nature of the fossil record, ancient remains from human-associated animals are somewhat rare. Fortunately, ancient DNA analysis as applied to domestic species proved to be a powerful tool in revealing human migrations. Herein, we analyzed 80-bp fragment of mitochondrial DNA control region from 27 Sus scrofa ancient samples retrieved from Southern Italian and Sardinian archeological sites, spanning in age from the Mesolithic to the Roman period. Our results surprisingly indicate the presence of the Near Eastern haplotype Y1 on both Italy's major islands (Sardinia and Sicily) during the Bronze Age, suggesting the seaborne transportation of domestic pigs by humans at least during 1600–1300 BC. The presence of the Italian E2 clade in domestic contexts shows that the indigenous wild boar was effectively domesticated or incorporated into domestic stocks in Southern Italy during the Bronze Age, although the E2 haplotype has never been found in modern domestic breeds. Pigs belonging to the endemic E2 clade were thus traded between the Peninsula and Sardinia by the end of the second millennium BC and this genetic signature is still detected in Sardinian feral pigs. PMID:27649620

Geoarchaeological research on Bronze Age settlement mounds in the Kolkheti lowlands at the Black Sea coast of Georgia

NASA Astrophysics Data System (ADS)

Laermanns, Hannes; Heisterkamp, Arne; Kirkitadze, Giorgi; Elashvili, Mikheil; Verheul, Jan; Kelterbaum, Daniel; Helmut, Brückner

2016-04-01

0.0.1 Situated between the Rivers Enguri in the north and Khobistsqali in the south, more than 20 settlement mounds (local name Dikhagudzuba), identified by field survey and remote sensing techniques, give evidence of a densely populated landscape in the coastal lowlands of eastern Georgia during the Bronze Age. While the existing chronology of these mounds is based on ceramic evidence obtained during a previous archaeological research, only limited information is available on their internal architecture and their palaeoenvironmental context, and the chronology of the different layers is as yet lacking. 0.0.2 Within the framework of a geoarchaeological research project, we carried out eleven vibracores on and in direct vicinity of three of the most prominent mounds, situated close to the villages of Orulu and Ergeta. Based on these sediment cores, our study aims at (i) establishing a chronostratigraphical framework for the settlements based on radiocarbon dating; (ii) reconstructing possible phases and gaps of occupation; and (iii) identifying the environmental conditions during the time of their existence. Geochemical and sedimentological analyses were carried out to decipher element contents (XRF), granulometry, and organic contents (LOI, C/N) of sediment samples, supporting the interpretation of the mounds' stratigraphical evolution and related human occupation. The three investigated settlement mounds are similar in dimension and stratigraphy, and different settlement layers could be identified in each of them. The 14C age estimates indicate that their formation occurred during the second half of the 3rd and the first half of the 2nd millennium BC, thus confirming the archaeological interpretation of their Bronze Age origin. Based on the granulometric and geochemical data, palaeoenvironmental conditions in the vicinity of the settlements were dominated by fluvial processes.

Ancient limpet shells as paleo-environmental and ethno-archaeological archives: the case of Beniguet Island's shell middens (Iroise Sea)

NASA Astrophysics Data System (ADS)

Cudennec, Jean-François; Stephan, Pierre; Dupont, Catherine; Pailler, Yvan; Thébault, Julien; Schöne, Bernd; Paulet, Yves-Marie

2017-04-01

During the winter 2013-2014, severe storm events caused a coastal erosion in the southern part of the Beniguet Island (Brittany, France). The associated shoreline retreat had uncovered three layers of shell middens interbedded into an aeolian sand dune deposit. From several radiocarbon dating crossed with the study of ceramic and lithic contents, the shell middens were dated to the Final Neolithic (2400 BC), the Early Bronze Age (2000 BC) and the Early Middle Age (800 AD) respectively. This site offers a unique opportunity to collect two types of information: palaeo-environmental (palaeo-temperature of sea water) and archaeological (determination of harvest season). In this study, we focus on gastropod of the genus Patella which represent 90% of the remains found in this midden. This organism is potentially a highly valuable archive for these environments because they are intertidal and relatively sedentary. We studied the growth rings in the outer calcitic layer of individual limpet shells from the Neolithic, Early Bronze Age and Present Day populations. We report here the results of δ18O analyses. We found a similarity between the reconstructed palaeo-temperature in the Neolithic and the Present periods (between 13 and 14°C in summer and about 8 - 9°C in winter). However, palaeo-temperatures of the Early Bronze Age shells are significantly lower in winter (5 - 6 °C). Moreover, the initial results of the δ18O analyses at the margin of these shells showed that they were harvested during a specific season (end of spring or early summer). Additional work will be done to address questions about shell growth dynamics of these species. These results confirm the interest of using ancient limpet shells as palaeo-environmental and archaeological archives.

75 FR 13345 - Pricing for Certain United States Mint Products

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-19

... is announcing the price of First Spouse Bronze Medals and 2010 First Spouse Bronze Medal Series: Four... currently on sale, effective March 18, 2010. The 2010 First Spouse Bronze Medal Series: Four-Medal Set will be priced at $15.95 and will contain all four 2010 First Spouse Bronze Medals. The release date for...

77 FR 14600 - Pricing for 2012 Kennedy Half-Dollar Bags and Rolls, Bronze Medals, the First Spouse Bronze Medal...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-12

... DEPARTMENT OF THE TREASURY United States Mint Pricing for 2012 Kennedy Half-Dollar Bags and Rolls, Bronze Medals, the First Spouse Bronze Medal Set and the Birth Set AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing 2012 pricing for...

48 CFR 252.216-7000 - Economic price adjustment-basic steel, aluminum, brass, bronze, or copper mill products.

Code of Federal Regulations, 2014 CFR

2014-10-01

...-basic steel, aluminum, brass, bronze, or copper mill products. 252.216-7000 Section 252.216-7000 Federal... adjustment—basic steel, aluminum, brass, bronze, or copper mill products. As prescribed in 216.203-4-70(a)(1), use the following clause: Economic Price Adjustment—Basic Steel, Aluminum, Brass, Bronze, or Copper...

48 CFR 252.216-7000 - Economic price adjustment-basic steel, aluminum, brass, bronze, or copper mill products.

Code of Federal Regulations, 2013 CFR

2013-10-01

...-basic steel, aluminum, brass, bronze, or copper mill products. 252.216-7000 Section 252.216-7000 Federal... adjustment—basic steel, aluminum, brass, bronze, or copper mill products. As prescribed in 216.203-4-70(a)(1), use the following clause: Economic Price Adjustment—Basic Steel, Aluminum, Brass, Bronze, or Copper...

48 CFR 252.216-7000 - Economic price adjustment-basic steel, aluminum, brass, bronze, or copper mill products.

Code of Federal Regulations, 2012 CFR

2012-10-01

...-basic steel, aluminum, brass, bronze, or copper mill products. 252.216-7000 Section 252.216-7000 Federal... adjustment—basic steel, aluminum, brass, bronze, or copper mill products. As prescribed in 216.203-4-70(a)(1), use the following clause: Economic Price Adjustment—Basic Steel, Aluminum, Brass, Bronze, or Copper...

48 CFR 252.216-7000 - Economic price adjustment-basic steel, aluminum, brass, bronze, or copper mill products.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-basic steel, aluminum, brass, bronze, or copper mill products. 252.216-7000 Section 252.216-7000 Federal... adjustment—basic steel, aluminum, brass, bronze, or copper mill products. As prescribed in 216.203-4-70(a), use the following clause: Economic Price Adjustment—Basic Steel, Aluminum, Brass, Bronze, or Copper...

Effect of alloying elements on the physicomechanical properties of copper and tin bronze

NASA Astrophysics Data System (ADS)

Ri, Kh.; Komkov, V. G.; Ri, E. Kh.

2014-09-01

The effect of alloying elements (Al, Si, Mn, Zn, Ni, As) on the physicomechanical properties of copper and tin bronze (6 wt % Sn) is studied. These alloying elements are found to increase the hardness and the microhardness of the structural constituents of Cu- X alloys due to hardening the α solid solution and eutectoid, and this effect of alloying elements is most effective in tin bronze. Alloyed copper and tin bronze have a lower thermal conductivity and corrosion resistance as compared to plain copper and tin bronze.

Thermal and Electrical Conductivity Measurements of Cda 510 Phosphor Bronze

NASA Astrophysics Data System (ADS)

Tuttle, J.; Canavan, E.; DiPirro, M.

2010-04-01

Many cryogenic systems use electrical cables containing phosphor bronze wire. While phosphor bronze's electrical and thermal conductivity values have been published, results vary among different phosphor bronze formulations. The James Webb Space Telescope (JWST) will use several phosphor bronze wire harnesses containing a specific formulation (CDA 510, annealed temper). These harnesses dominate the heat conducted into the JWST instrument stage, and approximately half of the harness conductance is due to the phosphor bronze wires. Since the JWST radiators are expected to keep the instruments at their operating temperature with limited cooling margin, it is important to know the thermal conductivity of the actual alloy being used. We describe an experiment that measured its electrical and thermal conductivity between 4 and 295 Kelvin.

Industrial garnet

USGS Publications Warehouse

Olson, D.W.

2012-01-01

Garnet has been used as a gemstone since the Bronze Age. However, garnet's angular fractures, relatively high hardness and specific gravity, chemical inertness, and nontoxicity make it ideal for many industrial applications. It is also free of crystalline silica and can be recycled.

Industrial garnet

USGS Publications Warehouse

Olson, D.W.

2011-01-01

Garnet has been used as a gemstone since the Bronze Age. However, garnet's angular fractures, relatively high hardness and specific gravity, chemical inertness and nontoxicity make it ideal for many industrial applications. It is also free of crystalline silica and can be recycled.

A European population in Minoan Bronze Age Crete

PubMed Central

Hughey, Jeffery R.; Paschou, Peristera; Drineas, Petros; Mastropaolo, Donald; Lotakis, Dimitra M.; Navas, Patrick A.; Michalodimitrakis, Manolis; Stamatoyannopoulos, John A.; Stamatoyannopoulos, George

2013-01-01

The first advanced Bronze Age civilization of Europe was established by the Minoans about 5,000 years before present. Since Sir Arthur Evans exposed the Minoan civic centre of Knossos, archaeologists have speculated on the origin of the founders of the civilization. Evans proposed a North African origin; Cycladic, Balkan, Anatolian and Middle Eastern origins have also been proposed. Here we address the question of the origin of the Minoans by analysing mitochondrial DNA from Minoan osseous remains from a cave ossuary in the Lassithi plateau of Crete dated 4,400–3,700 years before present. Shared haplotypes, principal component and pairwise distance analyses refute the Evans North African hypothesis. Minoans show the strongest relationships with Neolithic and modern European populations and with the modern inhabitants of the Lassithi plateau. Our data are compatible with the hypothesis of an autochthonous development of the Minoan civilization by the descendants of the Neolithic settlers of the island. PMID:23673646

Rapid climate change did not cause population collapse at the end of the European Bronze Age

PubMed Central

Armit, Ian; Swindles, Graeme T.; Becker, Katharina; Plunkett, Gill; Blaauw, Maarten

2014-01-01

The impact of rapid climate change on contemporary human populations is of global concern. To contextualize our understanding of human responses to rapid climate change it is necessary to examine the archeological record during past climate transitions. One episode of abrupt climate change has been correlated with societal collapse at the end of the northwestern European Bronze Age. We apply new methods to interrogate archeological and paleoclimate data for this transition in Ireland at a higher level of precision than has previously been possible. We analyze archeological 14C dates to demonstrate dramatic population collapse and present high-precision proxy climate data, analyzed through Bayesian methods, to provide evidence for a rapid climatic transition at ca. 750 calibrated years B.C. Our results demonstrate that this climatic downturn did not initiate population collapse and highlight the nondeterministic nature of human responses to past climate change. PMID:25404290

Rapid climate change did not cause population collapse at the end of the European Bronze Age.

PubMed

Armit, Ian; Swindles, Graeme T; Becker, Katharina; Plunkett, Gill; Blaauw, Maarten

2014-12-02

The impact of rapid climate change on contemporary human populations is of global concern. To contextualize our understanding of human responses to rapid climate change it is necessary to examine the archeological record during past climate transitions. One episode of abrupt climate change has been correlated with societal collapse at the end of the northwestern European Bronze Age. We apply new methods to interrogate archeological and paleoclimate data for this transition in Ireland at a higher level of precision than has previously been possible. We analyze archeological (14)C dates to demonstrate dramatic population collapse and present high-precision proxy climate data, analyzed through Bayesian methods, to provide evidence for a rapid climatic transition at ca. 750 calibrated years B.C. Our results demonstrate that this climatic downturn did not initiate population collapse and highlight the nondeterministic nature of human responses to past climate change.

Dental occlusion analysis in the Mesolithic-Neolithic Age, Bronze Age, and Roman to Medieval times in Serbia: Tooth size comparison in skeletal samples.

PubMed

Pajević, Tina; Glišić, Branislav

2017-05-01

Anthropological studies have reported that tooth size decreases in the context of diet changes. Some investigations have found a reverse trend in tooth size from the prehistoric to the modern times. The aims of this study were to analyze tooth size in skeletal samples from Mesolithic-Neolithic Age, Bronze Age, and Roman to Medieval times to determine sex differences and establish a temporal trend in tooth size in the aforementioned periods. Well-preserved permanent teeth were included in the investigation. The mesiodistal (MD) diameter of all teeth and buccolingual (BL) diameter of the molars were measured. Effects of sex and site were tested by one-way ANOVA, and the combined effect of these factors was analyzed by UNIANOVA. Sexual dimorphism was present in the BL diameters of all molars and MD diameters of the upper first and the lower third molar. The lower canine was the most dimorphic tooth in the anterior region. The MD diameter of most teeth showed no significant difference between the groups, (sample from: Mesolithic-Neolithic Age-group 1; Bronze Age-group 2; Roman times-group 3; Medieval times-group 4), whereas the BL diameters of the upper second and the lower first molar were the largest in the first group. Multiple comparisons revealed a decrease in the BL diameter of the upper second and the lower first molar from the first to the later groups. Lower canine MD diameter exhibited an increase in the fourth group compared to the second group. On the basis of the MD diameter, a temporal trend could not be observed for most of the teeth. The lower canine exhibited an increase in the MD diameter from the prehistoric to the Medieval times. Changes of BL diameter were more homogeneous, suggesting that the temporal trend of molar size decreased from the Mesolithic-Neolithic to Medieval times in Serbia. Copyright © 2017. Published by Elsevier Ltd.

Bronze age cosmology and rock art images. Solar ships, deer and charts

NASA Astrophysics Data System (ADS)

Dimitriadis, G.

Bronze Age societies were technologically complex. The impressive production of metal artefacts embodies clearly their astronomical culture and cosmological viewpoint. Same ascertainment is valid also for rock art. In fact, around the European landscape were discovered several cliffs engraved with solar ships, deer and charts. How one could be interpret them? Which is the hidden mentality? From the end of 3rd millennium-early 2nd millennium B. C. deep technological transformations are made by metals. New inventions such metal extraction for weapon production, horse pulling chariot used for war and the bull pulling one used for trade may shorten the culture and material distances between Central Europe and South Mediterranean area. Indeed, taphonomic studies indicate a specific modification of the human body mortuary traditional disposition (orientated to significant astronomical targets) below a substantial transformation of mortuary apparatus with spot evidence of weapons (halberds, swords, knifes) and ornaments (double spiral, lunar shape pectorals). The famous Trundhold Solar chart, the 2nd millennium terracotta chart form Dupljaja, the solar boats petroglyph in Bohusland and the horse rider carved on Philippi's cliffs were conceived by the same mentality: communion with the divinity. Culture expressions as communicate manifestation attested in rock art were produced by the same mentality presented in Bronze Age art-crafts such as, 1. Culture epidemiologic patterns dispersion took place through out iconographic motives, and, 2. Animals can play a double face function inside an analogical-mythological system: a. animal-reflex; b. animal-agent. The question is: Could such petroglyphs help us to "read" archaeoastronomical properly in an archaeological site?

Thermal and Electrical Conductivity Measurements of CDA 510 Phosphor Bronze

NASA Technical Reports Server (NTRS)

Tuttle, James E.; Canavan, Edgar; DiPirro, Michael

2009-01-01

Many cryogenic systems use electrical cables containing phosphor bronze wire. While phosphor bronze's electrical and thermal conductivity values have been published, there is significant variation among different phosphor bronze formulations. The James Webb Space Telescope (JWST) will use several phosphor bronze wire harnesses containing a specific formulation (CDA 510, annealed temper). The heat conducted into the JWST instrument stage is dominated by these harnesses, and approximately half of the harness conductance is due to the phosphor bronze wires. Since the JWST radiators are expected to just keep the instruments at their operating temperature with limited cooling margin, it is important to know the thermal conductivity of the actual alloy being used. We describe an experiment which measured the electrical and thermal conductivity of this material between 4 and 295 Kelvin.

UV reflection properties of plumage and skin of domesticated turkeys (Meleagris gallopavo f. dom.) as revealed by UV photography.

PubMed

Bartels, T; Lütgeharm, J-H; Wähner, M; Berk, J

2017-12-01

Reflection and fluorescence properties of feathered and non-feathered body regions of white- and bronze-colored fattening turkeys of various ages were examined by ultraviolet (UV) photography. The examinations were carried out on 20 white-feathered fattening turkeys (B.U.T. 6; 10 males, 10 females) and 20 bronze-feathered fattening turkeys (Grelier 708; 10 males, 10 females) over a period of 21 weeks. The turkeys were photographed once a wk under long-wave UV (UVA) radiation illumination (λ = 344-407 nm) using a digital camera. A bandpass filter was used for UV reflectography to filter out the visible components of the used light source. A longpass filter was used for UV fluorescence photography to avoid blurring in the image due to chromatic aberration as a result of UV illumination. We found that natal down feathers of white-feathered turkeys showed an intense yellowish-green fluorescence under UVA light. UVA fluorescence also was shown by the natal downs of the slightly melanized plumage areas of bronze turkeys. Vaned feathers of white fattening turkeys reflected UVA radiation. Freshly molted feathers were optically distinguishable from the previous feather generation due to their more intense UVA reflection. In bronze turkeys, both the bright end seams of the dark pennaceous feathers and rectrices and the bright banding of primary and secondary remiges reflected UVA radiation. Intense UVA fluorescence was recognizable in day-old chicks of both color variants on the scutellate scales of the legs and toes. In male turkeys of both color variants, UVA-reflecting parts were recognizable with increasing age on the featherless head region. The UVA-fluorescent and UVA-reflective characteristics of the plumage of fattening turkeys were closely related to the plumage color, the feather type, the molting state, and the age of the birds. Further research is needed regarding the UVA-reflecting properties of the turkey plumage and the effects of full-spectrum illumination, including the UVA spectrum, on the behavior and health of fattening turkeys. © 2017 Poultry Science Association Inc.

Industrial garnet

USGS Publications Warehouse

Olson, D.W.

2013-01-01

Garnet has been used as a gemstone since the Bronze Age. However, garnet’s angular fractures, relatively high hardness and specific gravity, chemical inertness and nontoxicity make it ideal for many industrial applications. It is also free of crystalline silica and can be recycled.

Earthquake and the Catastrophic End of the Late Bronze Age in the Eastern Mediterranean

NASA Astrophysics Data System (ADS)

Nur, A.

2009-04-01

The reasons for the catastrophic and wide spread political as well as physical collapse in the Aegean and Eastern Mediterranean areas that define the end of the Bronze age ca. 1225 BC to 1175 BC remain a major enigma. It has been attributed by historian to attacks by outsiders with the most favored group being the (enigmatic) so-called sea people. Unfortunately there is no real evidence for this. However combined geological, geophysical and archaeological evidence suggests that earthquakes may have played a key role in this extraordinary collapse during the late 13th and early 12th centuries . Based on the instrumentally recorded earthquakes occurring in the Aegean and Eastern Mediterranean region during the 20th century, several events that have clear historical information, and the geography of seismically active faults it is obvious that numerous earthquakes of magnitude 6·5 or greater (enough to destroy modern buildings, let alone those of antiquity) occurred here frequently in the past. Furthermore major earthquakes often occur in this region in groups, known as ‘‘sequences'' or ‘‘storms'', in which one large quake is followed days, months, or a few years later by others elsewhere on the plate boundary fault lines. When a map of the areas in the Aegean and Eastern Mediterranean region shaken by 20th century  earthquakes of magnitude 6·5 and greater and with an intensity of VII or greater is overlaid on Robert Drews' map of sites destroyed in these same regions during the so-called ‘‘Catastrophe'' near the end of the Late Bronze Age, it is readily apparent that virtually all of these LBA sites lie within the affected (‘‘high-shaking'') areas. This would suggest that a major ‘‘earthquake storm'' may have occurred in the Late Bronze Age Aegean and Eastern Mediterranean during the years 1225-1175 . This ‘‘storm'' may have interacted with societal, political and economic forces at work in these areas c. 1200  and merits consideration by archaeologists and prehistorians. Similarly several other unexplained civilization collapses may also be linked to catastrophic earthquakes such as the collapse of the Cassas Grandes civilization in Sonora, Mexico, and the Indus valley civilization,

Corrosion and Preservation of Bronze Artifacts.

ERIC Educational Resources Information Center

Walker, Robert

1980-01-01

Reviews chemical information relating to the corrosion of bronze artifacts. Properties of copper alloys are reviewed, with a thorough discussion of the specialized properties of bronze. Techniques to reduce or eliminate corrosion are listed. (CS)

Preparation and evaluation of thin-film sodium tungsten bronzes

NASA Technical Reports Server (NTRS)

Kautz, H. E.; Fielder, W. L.; Singer, J.; Fordyce, J. S.

1974-01-01

Thin films of sodium tungsten bronze (NaxWO3) were investigated as reversible sodium ion electrodes for solid electrolytes. The films were made by electron beam evaporation of the three phases, W metal, Na2WO4, and WO3, followed by sintering. The substrates were sodium beta alumina disks and glass slides. X-ray diffraction analyses of the films showed that sintering in dry nitrogen with prior exposure to air lead to mixed phases. Sintering in vacuum with no air exposure produced tetragonal I bronze with a nominal composition of Na0.31WO3, single phase within the limits of X-ray diffraction detectability. The films were uniform and adherent on sodium beta alumina substrates. The ac and dc conductivities of the beta alumina were measured with the sodium tungsten bronze films as electrodes. These experiments indicated that the tetragonal I bronze electrodes were not completely reversible. This may have resulted from sodium ion blocking within the bronze film or at the bronze beta alumina interface. Methods for attempting to make more completely reversible electrodes are suggested.

Nacre biomimetic design--a possible approach to prepare low infrared emissivity composite coatings.

PubMed

Zhang, Weigang; Xu, Guoyue; Ding, Ruya; Duan, Kaige; Qiao, Jialiang

2013-01-01

Mimicking the highly organized brick-and-mortar structure of nacre, a kind of nacre-like organic-inorganic composite material of polyurethane (PU)/flaky bronze composite coatings with low infrared emissivity was successfully designed and prepared by using PU and flaky bronze powders as adhesives and pigments, respectively. The infrared emissivity and microstructure of the coatings were systematically investigated by infrared emissometer and scanning electron microscopy, respectively, and the cause of low infrared emissivity of the coatings was discussed by using the theories of one-dimensional photonic structure. The results show that the infrared emissivity of the nacre-like PU/flaky bronze composite coatings can be as low as 0.206 at the bronze content of 60 wt. %, and it is significantly lower than the value of PU/sphere bronze composite coatings. Microstructure observation illustrated that the nacre-like PU/flaky bronze composite coatings have similar one-dimensional photonic structural characteristics. The low infrared emissivity of PU/flaky bronze composite coatings is derived from the similar one-dimensional photonic structure in the coatings. Copyright © 2012 Elsevier B.V. All rights reserved.

The Timan-Pechora Basin province of northwest Arctic Russia; Domanik, Paleozoic total petroleum system

USGS Publications Warehouse

Lindquist, Sandra J.

1999-01-01

The Domanik-Paleozoic oil-prone total petroleum system covers most of the Timan-Pechora Basin Province of northwestern Arctic Russia. It contains nearly 20 BBOE ultimate recoverable reserves (66% oil). West of the province is the early Precambrian Eastern European craton margin. The province itself was the site of periodic Paleozoic tectonic events, culminating with the Hercynian Uralian orogeny along its eastern border. The stratigraphic record is dominated by Paleozoic platform and shelf-edge carbonates succeeded by Upper Permian to Triassic molasse siliciclastics that are locally present in depressions. Upper Devonian (Frasnian), deep marine shale and limestone source rocks ? with typically 5 wt % total organic carbon ? by middle Mesozoic time had generated hydrocarbons that migrated into reservoirs ranging in age from Ordovician to Triassic but most focused in Devonian and Permian rocks. Carboniferous structural inversions of old aulacogen borders, and Hercynian (Permian) to Early Cimmerian (Late Triassic to Early Jurassic) orogenic compression not only impacted depositional patterns, but also created and subsequently modified numerous structural traps within the province.

Positron lifetime in vanadium oxide bronzes

NASA Astrophysics Data System (ADS)

Dryzek, J.; Dryzek, E.

2003-09-01

The positron lifetime (PL) and Doppler broadening (DB) of annihilation line measurements have been performed in vanadium oxide bronzes MxV2O5. The dependence of these annihilation characteristics on the kind and concentration of the metal M donor has been observed. In the PL spectrum only one lifetime component has been detected in all studied bronzes. The results indicate the positron localization in the structural tunnels present in the crystalline lattice of the vanadium oxide bronzes. (

Morus planting and silk production in Oxus civilization (2000 BC), Transoxiana

NASA Astrophysics Data System (ADS)

Zhou, X.; Li, X.; Wang, J.

2017-12-01

Silk is the most important luxury in ancient trade, which promoted communications between east and west civilizations that facilitated the development of them. Currently, probably more than 99% of the silk in commerce in the world today comes from a single species called the silkworm or mulberry silk moth, Bombyx mori (L.), of the family Bombycidae. At present, a list of occurrences of unearthed early silk thread, textile and terracotta figures of China suggests that wild silk has been widely used for weave in Yangtze river and Yellow River basin at least 5000 cal yr BP. On the other hand, the earliest silk fabric out China is from the earliest civilization Harappa site (4500-4000 cal a BP) that confirmed the early use of wild silkworms in South Asia.. In addition, in the Egyptian Deir al Medina relics site, the unearthed silk also as old as nearly 3000 cal a BP, and a serials of pre-han silk also unearthed 3000-2500 cal a BP in Europe. But, the appearance of these out-China silk is usually considered to be the result of the early trade or wild silkmoth products. Here we present a synthesis study of chronology, entomology, protein group, the paleoethnobotany form three Bronze Age site (Sapalli, Jarzgudan, Molleli) concerning on the paleo environment, agriculture gardening, and the possible mulberry silkworm utilization in Bronze Age Tensoxiana 4000 cal a BP. Together with archaeobotany and chronology data from Xinjiang, Hexi corridor and the Loess Plateau in China, we analysis the status of the mulberry silk factory in Bronze Age in Transoxiana and it possible connection to ancient China.

A distinct section of the Early Bronze Age society? Stable isotope investigations of burials in settlement pits and multiple inhumations of the Únětice culture in central Germany.

PubMed

Knipper, Corina; Fragata, Matthias; Nicklisch, Nicole; Siebert, Angelina; Szécsényi-Nagy, Anna; Hubensack, Vera; Metzner-Nebelsick, Carola; Meller, Harald; Alt, Kurt W

2016-03-01

Inhumations in so-called settlement pits and multiple interments are subordinate burial practices of the Early Bronze Age Únětice culture in central Germany (2200-1700/1650 BC). The majority of the Únětice population was entombed as single inhumations in rectangular grave pits with a normative position of the body. The goal of the study was to test archaeological hypotheses that the deviant burials may represent socially distinct or nonlocal individuals. The study comprised up to two teeth and one bone each of 74 human individuals from eight sites and faunal comparative samples. The inhumations included regular, deviant burials in so-called settlement or storage pits, and multiple burials. We investigated radiogenic strontium isotope compositions of tooth enamel ((87) Sr/(86) Sr) and light stable isotope ratios of carbon and nitrogen of bone collagen (δ(13) C, δ(15) N) aiming at the disclosure of residential changes and dietary patterns. Site-specific strontium isotope data ranges mirror different geological properties including calcareous bedrock, loess, and glacial till. Independent from burial types, they disclose low portions of nonlocal individuals of up to some 20% at the individual sites. The light stable isotope ratios of burials in settlement pits and rectangular graves overlap widely and indicate highly similar dietary habits. The analytical results let to conclude that inhumations in settlement pits and multiple burials were two of the manifold burial practices of the Early Bronze Age. The selection criteria of the individuals for the different forms of inhumation remained undisclosed. © 2015 Wiley Periodicals, Inc.

Ditches and Walls In The Lower City of Troia

NASA Astrophysics Data System (ADS)

Schröer, K.; Blindow, N.; Lange, M. A.; Jansen, H. G.

In different epochs the area of the lower city of Troia was enclosed by defense con- structions whose form and position are geophysically prospected and archaeologically verified since 1994. There are some special features and problems for the geophysical investigation in Troia caused by: - multiphase use of the lower city (Bronze Age, Hellenistic, Roman periods) - wide extension and different conservation of the remains - influence of present agricultural cultivation. In three campaigns from 1998 to 2000 the University of Münster performed geophys- ical measurements mainly to trace the course of an inner and an outer Bronze Age ditch. These features were partly known from former prospection and excavations. We used a Cesium-magnetometer as a vertical gradiometer with an additional base- station for diurnal corrections to obtain the anomalies of the total field. We also tested electromagnetic profiling. Magnetograms of the total field measured in 0.4 m height depicted structural features of extended objects more clearly than those of the gradi- ent. The ditches and walls could partly be traced as expected. As a surprise for the archaeologists, a 400 m long part of the hellenistic citywall was discovered in the western part of the Lower City. It had been expected to exist about 100 m to the east. Verified by excavation in the same trench, a significant part of the Bronze Age ditch appeared. These findings extend the known area of the Lower City of Troia by about four hec- tars. For the first time, large structures outside the Citadel and the Lower City were detected including the former bed of the Simoeis river. In 2001 the prospected area was extended by seven more hectars.

SEPARATION OF TIN FROM ALLOYS

DOEpatents

Kattner, W.T.

1959-08-11

A process is described for recovering tin from bronze comprising melting the bronze; slowly cooling the melted metal to from 280 to 240 deg C whereby eta- phase bronze crystallizes; separating the eta-bronze crystals from the liquid metal by mechanical means; melting the separated crystals; slowly cooling the melted eta-crystals to a temperature from 520 to 420 deg C whereby crystals of epsilonbronze precipitate; removing said epsilon-crystals from the remaining molten metal; and reintroducing the remaining molten metal into the process for eta-crystallization.

[Using Raman spectrum analysis to research corrosive productions occurring in alloy of ancient bronze wares].

PubMed

Jia, La-jiang; Jin, Pu-jun

2015-01-01

The present paper analyzes the interior rust that occurred in bronze alloy sample from 24 pieces of Early Qin bronze wares. Firstly, samples were processed by grinding, polishing and ultrasonic cleaning-to make a mirror surface. Then, a confocal micro-Raman spectrometer was employed to carry out spectroscopic study on the inclusions in samples. The conclusion indicated that corrosive phases are PbCO3 , PbO and Cu2O, which are common rusting production on bronze alloy. The light-colored circular or massive irregular areas in metallographic structure of samples are proved as Cu2O, showing that bronze wares are not only easy to be covered with red Cu2O rusting layer, but also their alloy is easy to be eroded by atomic oxygen. In other words, the rust Cu2O takes place in both the interior and exterior parts of the bronze alloy. In addition, Raman spectrum analysis shows that the dark grey materials are lead corrosive products--PbCO3 and PbO, showing the corroding process of lead element as Pb -->PbO-->PbCO3. In the texture of cast state of bronze alloy, lead is usually distributed as independent particles between the different alloy phases. The lead particles in bronze alloy would have oxidation reaction and generate PbO when buried in the soil, and then have chemical reaction with CO3(2-) dissolved in the underground water to generate PbCO3, which is a rather stable lead corrosive production. A conclusion can be drawn that the external corrosive factors (water, dissolved oxygen and carbonate, etc) can enter the bronze ware interior through the passageway between different phases and make the alloy to corrode gradually.

Earliest evidence for equid bit wear in the ancient Near East: The "ass" from Early Bronze Age Tell eṣ-Ṣâfi/Gath, Israel

PubMed Central

Shai, Itzhaq; Greenfield, Tina L.; Arnold, Elizabeth R.; Brown, Annie; Eliyahu, Adi; Maeir, Aren M.

2018-01-01

Analysis of a sacrificed and interred domestic donkey from an Early Bronze Age (EB) IIIB (c. 2800–2600 BCE) domestic residential neighborhood at Tell eṣ-Ṣâfi/Gath, Israel, indicate the presence of bit wear on the Lower Premolar 2 (LPM2). This is the earliest evidence for the use of a bit among early domestic equids, and in particular donkeys, in the Near East. The mesial enamel surfaces on both the right and left LPM2 of the particular donkey in question are slightly worn in a fashion that suggests that a dental bit (metal, bone, wood, etc.) was used to control the animal. Given the secure chronological context of the burial (beneath the floor of an EB IIIB house), it is suggested that this animal provides the earliest evidence for the use of a bit on an early domestic equid from the Near East. PMID:29768439

Ancient DNA reveals a migration of the ancient Di-qiang populations into Xinjiang as early as the early Bronze Age.

PubMed

Gao, Shi-Zhu; Zhang, Ye; Wei, Dong; Li, Hong-Jie; Zhao, Yong-Bin; Cui, Yin-Qiu; Zhou, Hui

2015-05-01

Xinjiang is at the crossroads between East and West Eurasia, and it harbors a relatively complex genetic history. In order to better understand the population movements and interactions in this region, mitochondrial and Y chromosome analyses on 40 ancient human remains from the Tianshanbeilu site in eastern Xinjiang were performed. Twenty-nine samples were successfully assigned to specific mtDNA haplogroups, including the west Eurasian maternal lineages of U and W and the east Eurasian maternal lineages of A, C, D, F, G, Z, M7, and M10. In the male samples, two Y chromosome haplogroups, C* and N1 (xN1a, N1c), were successfully assigned. Our mitochondrial and Y-chromosomal DNA analyses combined with the archaeological studies revealed that the Di-qiang populations from the Hexi Corridor had migrated to eastern Xinjiang and admixed with the Eurasian steppe populations in the early Bronze Age. © 2014 Wiley Periodicals, Inc.

Earliest evidence for equid bit wear in the ancient Near East: The "ass" from Early Bronze Age Tell eṣ-Ṣâfi/Gath, Israel.

PubMed

Greenfield, Haskel J; Shai, Itzhaq; Greenfield, Tina L; Arnold, Elizabeth R; Brown, Annie; Eliyahu, Adi; Maeir, Aren M

2018-01-01

Analysis of a sacrificed and interred domestic donkey from an Early Bronze Age (EB) IIIB (c. 2800-2600 BCE) domestic residential neighborhood at Tell eṣ-Ṣâfi/Gath, Israel, indicate the presence of bit wear on the Lower Premolar 2 (LPM2). This is the earliest evidence for the use of a bit among early domestic equids, and in particular donkeys, in the Near East. The mesial enamel surfaces on both the right and left LPM2 of the particular donkey in question are slightly worn in a fashion that suggests that a dental bit (metal, bone, wood, etc.) was used to control the animal. Given the secure chronological context of the burial (beneath the floor of an EB IIIB house), it is suggested that this animal provides the earliest evidence for the use of a bit on an early domestic equid from the Near East.

Solar and lunar calendars of the mountain sanctuary Kokino

NASA Astrophysics Data System (ADS)

Kuzmanovska, Olgica; Stankovski, Jovica; Apostolovska, Gordana

2016-03-01

The mountain sanctuary Kokino is located in the northeast part of Macedonia, on the summit of a hill of volcanic origin. The archeological research that has been performed for more than a decade confirmed its use as a large extra-urban religious site during the whole period of the Bronze Age. Additional astronomical analyses showed that it has the characteristics of a megalithic observatory, with some of its religious cults related with the motion of the sun, moon and some of the brightest stars. For that purpose the periodic motion of these celestial objects was observed and their position on specific calendar dates marked by stone notches cut in the surrounding rocks. In this paper, we present the results of the astronomical investigation of a group of stone markers aligned toward the specific positions of the full moon and analyze their purpose in creating a simple solar and lunar calendar which was used in planning the everyday life of the Bronze Age people in the region.

The hydrogeological and paleoclimatic factors in the Bronze Age Motillas Culture of La Mancha (Spain): the first hydraulic culture in Europe

NASA Astrophysics Data System (ADS)

Benítez de Lugo Enrich, Luis; Mejías, Miguel

2017-11-01

Recent studies indicate that the motillas (Chalcolithic and Bronze Age settlements in La Mancha, Spain) could have constituted the most ancient groundwater collection system at regional scale in Europe. This paper presents the first hydrogeoarchaeological study at the regional level in La Mancha. The research includes borehole drilling and hydrogeological analysis of the territory on which the motillas are settled. The resulting data confirm a relationship between the geological substrate and the spatial distribution of the motillas, sited where groundwater was accessible by means of prehistoric technology. The motillas were built during the climatic event known as 4.2 ka cal BP, in a time of environmental stress after a period of severe and prolonged drought. In these environmental conditions, the construction of these wells was a successful solution that lived on for nearly a millennium and played a major part in the processes of change towards a more complex, hierarchical society.

Paleoecological crisis in the steppes of the Lower Volga region in the Middle of the Bronze Age (III-II centuries BC)

NASA Astrophysics Data System (ADS)

Demkina, T. S.; Borisov, A. V.; Demkin, V. A.; Khomutova, T. E.; Kuznetsova, T. V.; El'tsov, M. V.; Udal'tsov, S. N.

2017-07-01

Diagnostic features of a catastrophic aridization of climate, desertification, and paleoecological crisis in steppes of the Lower Volga region have been identified on the basis of data on the morphological, chemical, and microbiological properties of paleosols under archeological monuments (burial mounds) of the Middle Bronze Age. These processes resulted in a certain convergence of the soil cover with transformation of zonal chestnut (Kastanozems) paleosols and paleosolonetzes (Solonetz Humic) into specific chestnut-like eroded saline calcareous paleosols analogous to the modern brown desert-steppe soils (Calcisols Haplic) that predominated in this region 4300-3800 years ago.1 In the second millennium BC, humidization of the climate led to the divergence of the soil cover with secondary formation of the complexes of chestnut soils and solonetzes. This paleoecological crisis had a significant effect on the economy of the tribes in the Late Catacomb and Post-Catacomb time stipulating their higher mobility and transition to the nomadic cattle breeding.

75 FR 57825 - Culturally Significant Objects Imported for Exhibition Determinations: “Ancient Chinese Bronzes...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-22

... DEPARTMENT OF STATE [Public Notice 7181] Culturally Significant Objects Imported for Exhibition Determinations: ``Ancient Chinese Bronzes From the Shouyang Studio: The Katherine and George Fan Collection... ``Ancient Chinese Bronzes from the Shouyang Studio: The Katherine and George Fan Collection,'' imported from...

21 CFR 73.2646 - Bronze powder.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2646 Bronze powder. (a) Identity and specifications. The....1646 (a)(1) and (b). (b) Uses and restrictions. Bronze powder may be safely used in coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with good...

21 CFR 73.2646 - Bronze powder.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2646 Bronze powder. (a) Identity and specifications. The....1646 (a)(1) and (b). (b) Uses and restrictions. Bronze powder may be safely used in coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with good...

21 CFR 73.2646 - Bronze powder.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2646 Bronze powder. (a) Identity and specifications. The....1646 (a)(1) and (b). (b) Uses and restrictions. Bronze powder may be safely used in coloring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with good...

21 CFR 73.2646 - Bronze powder.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Bronze powder. 73.2646 Section 73.2646 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR....1646 (a)(1) and (b). (b) Uses and restrictions. Bronze powder may be safely used in coloring cosmetics...

21 CFR 73.2646 - Bronze powder.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Bronze powder. 73.2646 Section 73.2646 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR....1646 (a)(1) and (b). (b) Uses and restrictions. Bronze powder may be safely used in coloring cosmetics...

75 FR 15764 - Culturally Significant Objects Imported for Exhibition Determinations: “Gods of Angkor: Bronzes...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... DEPARTMENT OF STATE [Public Notice 6936] Culturally Significant Objects Imported for Exhibition Determinations: ``Gods of Angkor: Bronzes From the National Museum of Cambodia'' SUMMARY: Notice is hereby given... objects to be included in the exhibition ``Gods of Angkor: Bronzes from the National Museum of Cambodia...

76 FR 40402 - Matthews International Corporation, Bronze Division, Kingwood, WV; Notice of Negative...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-08

... the Federal Register on February 10, 2011 (76 FR 7584). Workers were engaged in the production of cast... their purchases of cast bronze memorial products (and like or directly competitive articles) in 2007... Department determines that imports of articles like or directly competitive with the cast bronze memorial...

URINARY MUTAGENICITY IN CHARCOAL WORKERS: A CROSS-SECTIONAL STUDY IN NORTHEASTERN BRAZIL

EPA Science Inventory

Urinary Mutagenicity in charcoal workers: a cross-sectional study in northeastern Brazil

Charcoal production by wood carbonization is an ancient process that has changed little since the Bronze Age. Its production in large scale is necessary to sustain some steel and pig...

GREECE--SELECTED PROBLEMS.

ERIC Educational Resources Information Center

MARTONFFY, ANDREA PONTECORVO; AND OTHERS

A CURRICULUM GUIDE IS PRESENTED FOR A 10-WEEK STUDY OF ANCIENT GREEK CIVILIZATION AT THE 10TH-GRADE LEVEL. TEACHING MATERIALS FOR THE UNIT INCLUDE (1) PRIMARY AND SECONDARY SOURCES DEALING WITH THE PERIOD FROM THE BRONZE AGE THROUGH THE HELLENISTIC PERIOD, (2) GEOGRAPHY PROBLEMS, AND (3) CULTURAL MODEL PROBLEM EXERCISES. THOSE CONCEPTS WITH WHICH…

Ancient harbour infrastructure in the Levant: tracking the birth and rise of new forms of anthropogenic pressure.

PubMed

Marriner, Nick; Morhange, Christophe; Kaniewski, David; Carayon, Nicolas

2014-07-03

Beirut, Sidon and Tyre were major centres of maritime trade from the Bronze Age onwards. This economic prosperity generated increased pressures on the local environment, through urbanization and harbour development. Until now, however, the impact of expanding seaport infrastructure has largely been neglected and there is a paucity of data concerning the environmental stresses caused by these new forms of anthropogenic impacts. Sediment archives from Beirut, Sidon and Tyre are key to understanding human impacts in harbour areas because: (i) they lie at the heart of ancient trade networks; (ii) they encompass the emergence of early maritime infrastructure; and (iii) they enable human alterations of coastal areas to be characterized over long timescales. Here we report multivariate analyses of litho- and biostratigraphic data to probe human stressors in the context of their evolving seaport technologies. The statistical outcomes show a notable break between natural and artificial sedimentation that began during the Iron Age. Three anchorage phases can be distinguished: (i) Bronze Age proto-harbours that correspond to natural anchorages, with minor human impacts; (ii) semi-artificial Iron Age harbours, with stratigraphic evidence for artificial reinforcement of the natural endowments; and (iii) heavy human impacts leading to completely artificial Roman and Byzantine harbours.

Ancient harbour infrastructure in the Levant: tracking the birth and rise of new forms of anthropogenic pressure

PubMed Central

Marriner, Nick; Morhange, Christophe; Kaniewski, David; Carayon, Nicolas

2014-01-01

Beirut, Sidon and Tyre were major centres of maritime trade from the Bronze Age onwards. This economic prosperity generated increased pressures on the local environment, through urbanization and harbour development. Until now, however, the impact of expanding seaport infrastructure has largely been neglected and there is a paucity of data concerning the environmental stresses caused by these new forms of anthropogenic impacts. Sediment archives from Beirut, Sidon and Tyre are key to understanding human impacts in harbour areas because: (i) they lie at the heart of ancient trade networks; (ii) they encompass the emergence of early maritime infrastructure; and (iii) they enable human alterations of coastal areas to be characterized over long timescales. Here we report multivariate analyses of litho- and biostratigraphic data to probe human stressors in the context of their evolving seaport technologies. The statistical outcomes show a notable break between natural and artificial sedimentation that began during the Iron Age. Three anchorage phases can be distinguished: (i) Bronze Age proto-harbours that correspond to natural anchorages, with minor human impacts; (ii) semi-artificial Iron Age harbours, with stratigraphic evidence for artificial reinforcement of the natural endowments; and (iii) heavy human impacts leading to completely artificial Roman and Byzantine harbours. PMID:24989979

Ancient harbour infrastructure in the Levant: tracking the birth and rise of new forms of anthropogenic pressure

NASA Astrophysics Data System (ADS)

Marriner, Nick; Morhange, Christophe; Kaniewski, David; Carayon, Nicolas

2014-07-01

Beirut, Sidon and Tyre were major centres of maritime trade from the Bronze Age onwards. This economic prosperity generated increased pressures on the local environment, through urbanization and harbour development. Until now, however, the impact of expanding seaport infrastructure has largely been neglected and there is a paucity of data concerning the environmental stresses caused by these new forms of anthropogenic impacts. Sediment archives from Beirut, Sidon and Tyre are key to understanding human impacts in harbour areas because: (i) they lie at the heart of ancient trade networks; (ii) they encompass the emergence of early maritime infrastructure; and (iii) they enable human alterations of coastal areas to be characterized over long timescales. Here we report multivariate analyses of litho- and biostratigraphic data to probe human stressors in the context of their evolving seaport technologies. The statistical outcomes show a notable break between natural and artificial sedimentation that began during the Iron Age. Three anchorage phases can be distinguished: (i) Bronze Age proto-harbours that correspond to natural anchorages, with minor human impacts; (ii) semi-artificial Iron Age harbours, with stratigraphic evidence for artificial reinforcement of the natural endowments; and (iii) heavy human impacts leading to completely artificial Roman and Byzantine harbours.

Influence of Metal-Coated Graphite Powders on Microstructure and Properties of the Bronze-Matrix/Graphite Composites

NASA Astrophysics Data System (ADS)

Zhao, Jian-hua; Li, Pu; Tang, Qi; Zhang, Yan-qing; He, Jian-sheng; He, Ke

2017-02-01

In this study, the bronze-matrix/x-graphite (x = 0, 1, 3 and 5%) composites were fabricated by powder metallurgy route by using Cu-coated graphite, Ni-coated graphite and pure graphite, respectively. The microstructure, mechanical properties and corrosive behaviors of bronze/Cu-coated-graphite (BCG), bronze/Ni-coated-graphite (BNG) and bronze/pure-graphite (BPG) were characterized and investigated. Results show that the Cu-coated and Ni-coated graphite could definitely increase the bonding quality between the bronze matrix and graphite. In general, with the increase in graphite content in bronze-matrix/graphite composites, the friction coefficients, ultimate density and wear rates of BPG, BCG and BNG composites all went down. However, the Vickers microhardness of the BNG composite would increase as the graphite content increased, which was contrary to the BPG and BCG composites. When the graphite content was 3%, the friction coefficient of BNG composite was more stable than that of BCG and BPG composites, indicating that BNG composite had a better tribological performance than the others. Under all the values of applied loads (10, 20, 40 and 60N), the BCG and BNG composites exhibited a lower wear rate than BPG composite. What is more, the existence of nickel in graphite powders could effectively improve the corrosion resistance of the BNG composite.

Geology and assessment of undiscovered oil and gas resources of the Timan-Pechora Basin Province, Russia, 2008

USGS Publications Warehouse

Schenk, Christopher J.; Moore, Thomas E.; Gautier, D.L.

2017-11-15

The Timan-Pechora Basin Province is a triangular area that represents the northeasternmost cratonic block of east European Russia. A 75-year history of petroleum exploration and production in the area there has led to the discovery of more than 16 billion barrels of oil (BBO) and 40 trillion cubic feet of gas (TCFG). Three geologic assessment units (AUs) were defined for assessing the potential for undiscovered oil and gas resources in the province: (1) the Northwest Izhma Depression AU, which includes all potential structures and reservoirs that formed in the northwestern part of the Izhma-Pechora Depression, although this part of the basin contains only sparse source and reservoir rocks and so was not assessed quantitatively; (2) the Main Basin Platform AU, which includes all potential structures and reservoirs that formed in the central part of the basin, where the tectonic and petroleum system evolution was complex; and (3) the Foredeep Basins AU, which includes all potential structures and reservoirs that formed within the thick sedimentary section of the foredeep basins west of the Uralian fold and thrust belt during the Permian and Triassic Uralian orogeny.For the Timan-Pechora Basin Province, the estimated means of undiscovered resources are 3.3 BBO, 17 TCFG, and 0.3 billion barrels of natural-gas liquids (BBNGL). For the AU areas north of the Arctic Circle in the province, the estimated means of undiscovered resources are 1.7 BBO, 9.0 TCFG, and 0.2 BBNGL. These assessment results indicate that exploration in the Timan-Pechora Basin Province is at a mature level.

Middle-Late Holocene environmental history of Kulunda (Southwestern Siberia): vegetation, climate, humans

NASA Astrophysics Data System (ADS)

Rudaya, N.; Nazarova, L.; Papin, D.; Nourgaliev, D.

2012-04-01

Environmental reconstruction of Mid-Late Holocene vegetation and climate was inferred from pollen records of Lake Big Yarovoe (Kulunda steppe, Southwestern Siberia). Reconstruction suggests generally prevalence of steppe during last 4.45 ka. Relatively warm and dry climate, open semi-desert and dry steppes with patchy birch forest spread between 4.45 and 3.80 ka BP. The largest development of conifers forest started in Kulunda after 3.80 ka BP. Constant presence of dark-coniferous trees Abies and especially Picea between 3.80 and 2.7 ka BP indicates the most humid period in the region during studied time. Onset of the Late Holocene is characterised by dominance of steppe with birch and pine forests in lowlands and river valleys. After AD 1860, open steppe and semi-desert vegetation with fragmentary birch forest have been dominated parallel to sharp reduction of conifers in Kulunda. These results are in agreement with general scheme of Holocene environmental history of surrounding areas including Baraba forest-steppe, Kazakh Upland and Altai Mountains. Territory of Kulunda consists many archaeological sites of Bronze, Iron and Middle Ages. Second half of Bronze Age (4.45-3.80 ka BP) was represented by local human cultures or migrants from the North Kazakhstan. The main archaeological culture of Kulunda alike in the whole Ob`-Irtysh interfluve in this period was Elunino culture. The economical activities of Elunino community were connected with animal breeding especially with sheep and goats. The most humid period (~1795-710 BC; 3.8-2.7 ka BP) in Kulunda corresponded to the end of early Bronze Age and to the onset of the Iron Age. In 18 century BC Andronovo culture, associated with the Indo-Iranians and migrants from Central Kazakhstan, spread in the region. Cattle breeding economy was distinctive features of Andronovo people, however, increase of sheep, goats and horses with transition to nomadic life style was characteristic of the late Bronze Age. This trend is in good agreement with increase of humidity and development of snow cover in winter. Horses and small animals like sheep and goats can forage from under the snow. New economical type was finally established in the early Iron Age and remained until occupation of the region by Russian migrants (onset of 19 century). Afforestation of Kulunda started in the beginning of the Middle Ages and coincided with great migration of population. During the second half of the first AD millennium, the First and Second Turkic Khaganates were established in Kulunda. From the beginning of AD 13 century Altai was under the Mongolian influence. There are no archaeological and literary evidences from Kulunda between AD 15-16 centuries. Probably, environmental conditions of Little Ice Age caused migration of population southwards. Mongolian nomads inhabited the territory of Kulunda in the AD 17-18 centuries; in the middle of AD 18 century Kulunda was settled by Russian. The most significant population of the Russian peasants started to settle here only in second half of AD 19 century. Pollen data recorded in Lake Big Yarovoe core indicated that right from this time forests started to decrease and open steppe spread in Kulunda.

48 CFR 252.216-7000 - Economic price adjustment-basic steel, aluminum, brass, bronze, or copper mill products.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-basic steel, aluminum, brass, bronze, or copper mill products. 252.216-7000 Section 252.216-7000 Federal... adjustment—basic steel, aluminum, brass, bronze, or copper mill products. As prescribed in 216.203-4-70(a... Mill Products (JUL 1997) (a) Definitions. As used in this clause— Established price means a price which...

Propolis as a green corrosion inhibitor for bronze in weakly acidic solution

NASA Astrophysics Data System (ADS)

Varvara, Simona; Bostan, Roxana; Bobis, Otilia; Găină, Luiza; Popa, Florin; Mena, Vicente; Souto, Ricardo M.

2017-12-01

In the present work, the inhibitive action of natural propolis on bronze corrosion in a weakly acidic solution containing Na2SO4 and NaHCO3 at pH 5 was evaluated using multiscale electrochemical techniques, namely potentiodynamic polarization, electrochemical impedance spectroscopy and scanning vibrating electrode technique measurements. The major constituents of propolis were identified by HPLC. Surface characterization was performed by SEM-EDX and AFM analysis. Experiments were performed as a function of the propolis concentration and immersion time in the corrosive electrolyte. The obtained results showed that propolis presents good anticorrosive properties on bronze, acting as a mixed-type inhibitor, but its protective effectiveness is time-dependent. The highest inhibiting efficiency of 98.9% was obtained in the presence of 100 ppm propolis, after about 12 h of exposure to inhibitor-containing electrolyte through the stabilization of Cu2O on the bronze surface. The inhibitive properties of propolis on bronze corrosion are likely due to the adsorption of its main constituents (flavonoids and phenolic compounds), through the oxygen atoms in their functional groups and aromatic rings, which have been evidenced by FT-IR spectra. The adsorption of propolis on bronze was found to follow Langmuir adsorption isotherm.

Astronomical Symbolism in Bronze-Age and Iron-Age Rock Art

NASA Astrophysics Data System (ADS)

García Quintela, Marco V.; Santos-Estévez, Manuel

The best-known rock art from Late Prehistory is found in Scandinavia, the Alps, and Galicia, North West Spain. In this chapter, we explore its association with astronomical symbolism from three perspectives: the representation of heavenly bodies, the visibility conditions of the carvings, and their position on astronomical alignments. We also consider temporal variables and the impact of aspects of Indo-European ideology on the construction of the representations in their astronomical relationships.

The population genomics of archaeological transition in west Iberia: Investigation of ancient substructure using imputation and haplotype-based methods

PubMed Central

Martiniano, Rui; McLaughlin, Russell; Silva, Nuno M.; Manco, Licinio; Pereira, Tania; Coelho, Maria J.; Serra, Miguel; Burger, Joachim; Parreira, Rui; Moran, Elena; Valera, Antonio C.; Silva, Ana M.

2017-01-01

We analyse new genomic data (0.05–2.95x) from 14 ancient individuals from Portugal distributed from the Middle Neolithic (4200–3500 BC) to the Middle Bronze Age (1740–1430 BC) and impute genomewide diploid genotypes in these together with published ancient Eurasians. While discontinuity is evident in the transition to agriculture across the region, sensitive haplotype-based analyses suggest a significant degree of local hunter-gatherer contribution to later Iberian Neolithic populations. A more subtle genetic influx is also apparent in the Bronze Age, detectable from analyses including haplotype sharing with both ancient and modern genomes, D-statistics and Y-chromosome lineages. However, the limited nature of this introgression contrasts with the major Steppe migration turnovers within third Millennium northern Europe and echoes the survival of non-Indo-European language in Iberia. Changes in genomic estimates of individual height across Europe are also associated with these major cultural transitions, and ancestral components continue to correlate with modern differences in stature. PMID:28749934

The Somma-Vesuvius complex and the Phlaegrean Fields caldera: New chronological data of several eruptions of the Copper-Middle Bronze Age period

NASA Astrophysics Data System (ADS)

Passariello, Isabella; Lubritto, Carmine; D'Onofrio, Antonio; Guan, Yongjing; Terrasi, Filippo

2010-04-01

Radiocarbon dating of short-lived sample materials is a useful tool applied to date deposits of volcanic eruptions. Several archaeological sites discovered and excavated in Campania witnessed important volcanic eruptions, which occurred in the Copper and Middle Bronze Ages. These eruptions come from the Somma-Vesuvius complex and the Phlaegrean Fields caldera. At least four Plinian eruptions have been identified in the eruptive history of Somma-Vesuvius, interspersed by interplinian events, called protohistoric, which occurred between Avellino and Pompeii. At S. Paolo Belsito a stratigraphic sequence below Avellino and above the first two protohistoric events after Avellino were highlighted; while Nola (Naples) gives new information on the chronology of Avellino. Sites like Caivano and Gricignano D'Aversa, involved by the Agnano 3, Paleoastroni 2 and Agnano Monte Spina eruptions were highlighted and investigated. In this work, we want to clarify the chronology of some eruptions by comparing our results with previous data. Charcoal, bone and seed samples were collected, treated and measured at the CIRCE laboratory in Caserta.

The Avellino 3780-yr-B.P. catastrophe as a worst-case scenario for a future eruption at Vesuvius

PubMed Central

Mastrolorenzo, Giuseppe; Petrone, Pierpaolo; Pappalardo, Lucia; Sheridan, Michael F.

2006-01-01

A volcanic catastrophe even more devastating than the famous anno Domini 79 Pompeii eruption occurred during the Old Bronze Age at Vesuvius. The 3780-yr-B.P. Avellino plinian eruption produced an early violent pumice fallout and a late pyroclastic surge sequence that covered the volcano surroundings as far as 25 km away, burying land and villages. Here we present the reconstruction of this prehistoric catastrophe and its impact on the Bronze Age culture in Campania, drawn from an interdisciplinary volcanological and archaeoanthropological study. Evidence shows that a sudden, en masse evacuation of thousands of people occurred at the beginning of the eruption, before the last destructive plinian column collapse. Most of the fugitives likely survived, but the desertification of the total habitat due to the huge eruption size caused a social–demographic collapse and the abandonment of the entire area for centuries. Because an event of this scale is capable of devastating a broad territory that includes the present metropolitan district of Naples, it should be considered as a reference for the worst eruptive scenario at Vesuvius. PMID:16537390

The U.S. health insurance marketplace: are premiums truly affordable?

PubMed

Graetz, Ilana; Kaplan, Cameron M; Kaplan, Erin K; Bailey, James E; Waters, Teresa M

2014-10-21

The Patient Protection and Affordable Care Act requires that individuals have health insurance or pay a penalty. Individuals are exempt from paying this penalty if the after-subsidy cost of the least-expensive plan available to them is greater than 8% of their income. For this study, premium data for all health plans offered on the state and federal health insurance marketplaces were collected; the after-subsidy cost of premiums for the least-expensive bronze plan for every county in the United States was calculated; and variations in premium affordability by age, income, and geographic area were assessed. Results indicated that-although marketplace subsidies ensure affordable health insurance for most persons in the United States-many individuals with incomes just above the subsidy threshold will lack affordable coverage and will be exempt from the mandate. Furthermore, young individuals with low incomes often pay as much as or more than older individuals for bronze plans. If substantial numbers of younger, healthier adults choose to remain uninsured because of cost, health insurance premiums across all ages may increase over time.

The significance of the Sun, Moon and celestial bodies to societies in the Carpathian basin during the Bronze Age

NASA Astrophysics Data System (ADS)

Pásztor, Emília

2011-06-01

Celestial events often exerted a great or even decisive influence on the life of ancient communities. They may provide some of the foundations on which an understanding of the deeper meaning of mythologies, religious systems and even folk tales can be based. These influences are reflected and may be detected in the archaeological material as well. There is good evidence that celestial (especially solar and perhaps lunar) phenomena played a particularly important rôle in the worldview of prehistoric Europe. To reveal the social and ideational significance of concepts relating to the celestial bodies in the prehistory of the Carpathian Basin, complex investigations on orientations of houses and graves, prestige archaeological finds and iconography have been accomplished. The results indicate ideological and/or social changes, which developed into a likely organized ideological system in large part of Central Europe including the Carpathian Basin by the Late Bronze Age. It might also be the first period in prehistory when people became really interested in celestial phenomena.

Study of wear mechanism of chopped fiber reinforced epoxy composite filled with graphite and bronze

NASA Astrophysics Data System (ADS)

Patil, Nitinchand; Prasad, Krishna

2018-04-01

The combined effect of graphite and sintered bronze with a short glass fiber reinforced epoxy composites was investigated in this work. A pin on disc wear test was carried out to study the wear behaviour and mechanism of the composites. The objective of this work is to develop an alternate friction resistance material for the application of sliding bearing. It was observed that the addition of sintered bronze improved mechanical and thermal stability of the composites as bronze has low contact resistance with graphite and has high thermal conductivity. It was observed from the test results that increased volume percentage of graphite and presence of bronze are play significant role in wear mechanism of the composites. It was observed from the scanning electronic microscopes (SEM) that the abrasive and adhesive wear mechanism was prominent in this study. It was also evident from the result that the frictional force remains stable irrespective of the applied normal load.

Climate change versus land management in the Po Plain (Northern Italy) during the Bronze Age: New insights from the VP/VG sequence of the Terramara Santa Rosa di Poviglio

NASA Astrophysics Data System (ADS)

Cremaschi, Mauro; Mercuri, Anna Maria; Torri, Paola; Florenzano, Assunta; Pizzi, Chiara; Marchesini, Marco; Zerboni, Andrea

2016-03-01

The sedimentary infilling of the moat surrounding the Villaggio Piccolo of the Terramara Santa Rosa di Poviglio was analysed in order to obtain palaeoenvironmental inferences from sediments and pollen assemblage. The high-resolution stratigraphic sequence preserves evidence of the environmental changes that occurred in the Po Plain, in Northern Italy, during the Late Holocene. Our interdisciplinary approach permitted to study climatic and anthropic contributions to the environmental changes in this region. The relationships between these changes and land-use changes were investigated focussing on adaptive strategies of the Terramare people during the Middle and Recent Bronze ages (1550-1170 yr BC). The Terramare are archaeological remains of banked and moated villages, located in the central alluvial plain of the Po river. The Terramara of Santa Rosa consists of two adjoining settlements (Villaggio Grande and Villaggio Piccolo); the moat that separates the two parts of the site is c. 23 m large and reaches a maximum depth of 4 m from the extant ground level. The stratigraphic sequence VP/VG exposed by archaeological excavation inside the moat was sampled for pedosedimentary, thin section, and pollen analyses. Chronology is based on archaeological evidence, stratigraphic correlations and radiocarbon dating. Pedosedimentary features and biological records (pollen of aquatics and algal remains) demonstrate that shallow water, probably subjected to seasonal water-level oscillations, has always been present in the moat. In the lower units of the sequence, the laminations indicate standing water, while occurrence of reworked pollen testified the supply of sediments to the plain from catchment zones located in the Apennine. Open vegetation was widespread; economy was based on wood management, fruit collection on the wild or from cultivated woody plants, crop fields with a fairly diversified set of cereals especially increasing in variety during dryness or phases of water crisis. Probably, grapevines were cultivated near the moat, where the wet habitat was favourable to the growing of wild plants. The extraordinary high-resolution of this sequence makes visible the management of woods (including coppicing) at the Middle Bronze and early Recent Bronze ages. The economy of Santa Rosa di Poviglio should have been probably less based on animal breeding than it was in the other Terramare villages already studied for pollen. This research also confirms the chronological correspondence between an environment stressed by dry conditions and the collapse of the Terramare civilization.

Warm Spraying of High-Strength Ni-Al-Bronze: Cavitation Characteristics and Property Prediction

NASA Astrophysics Data System (ADS)

Krebs, Sebastian; Kuroda, Seiji; Katanoda, Hiroshi; Gaertner, Frank; Klassen, Thomas; Araki, Hiroshi; Frede, Simon

2017-01-01

Bronze materials such as Ni-Al-bronze show exceptional performances against cavitation erosion, due to their high fatigue strength and high strength. These materials are used for ship propellers, pump systems or for applications with alternating stresses. Usually, the respective parts are cast. With the aim to use resources more efficiently and to reduce costs, this study aimed to evaluate opportunities to apply bronze as a coating to critical areas of respective parts. The coatings should have least amounts of pores and non-bonded areas and any contaminations that might act as crack nuclei and contribute to material damages. Processes with low oxidation and high kinetic impacts fulfill these criteria. Especially warm spraying, a nitrogen-cooled HVOF process, with similar impact velocities as cold gas spraying but enhanced process temperature, allows for depositing high-strength Ni-Al-bronze. This study systematically simulates and evaluates the formation and performance of warm-sprayed Ni-Al-bronze coatings for different combustion pressures and nitrogen flow rates. Substrate preheating was used to improve coating adhesion for lower spray parameter sets. Furthermore, this study introduces an energy-based concept to compare spray parameter sets and to predict coating properties. Coatings with low porosities and high mechanical strengths are obtained, allowing for a cavitation resistance similar to bulk material.

Mineral resource of the month: garnet

USGS Publications Warehouse

Olson, Donald W.

2011-01-01

Garnet, the birthstone for the month of January, has been used as a gemstone for centuries. Garnet necklaces dating from the Bronze Age have been found in graves, and garnet is found among the ornaments adorning the oldest Egyptian mummies. However, garnet’s characteristics, such as its relatively high hardness and chemical inertness, make it ideal for many industrial applications.

Eco-medical tourism: can it be sustainable?

Treesearch

Robert S. Bristow

2009-01-01

Medical tourism has gained popularity over the past few years. While its roots may be found in the Neolithic and Bronze Ages with visits to mineral springs around the Mediterranean, current medical tourism is more likely to be driven by patients seeking less expensive medical procedures in eastern Europe, southeast Asia, and Latin America. This paper explores the role...

Silk Roads or Steppe Roads? The Silk Roads in World History.

ERIC Educational Resources Information Center

Christian, David

2000-01-01

Explores the prehistory of the Silk Roads, reexamines their structure and history in the classical era, and explores shifts in their geography in the last one thousand years. Explains that a revised understanding of the Silk Roads demonstrates how the Afro-Eurasian land mass has been linked by networks of exchange since the Bronze Age. (CMK)

Hydrothermal preparation of blue molybdenum bronze nanoribbons: structural changes in mother crystals, related to solid-state conversion and crystallite splitting to nanomorphology

NASA Astrophysics Data System (ADS)

Nishida, Takamasa; Eda, Kazuo

2018-02-01

Hydrothermal syntheses of alkali-metal blue molybdenum bronze nanoribbons, which are expected to exhibit unique properties induced by a combined effect of extrinsic and intrinsic low-dimensionalities, from hydrated-alkali-metal molybdenum bronzes were investigated. Nanoribbons grown along the quasi-one-dimensional (1D) conductive direction of Cs0.3MoO3, which is difficult to prepare by the conventional methods, were first synthesized. The nanomorphology formation is achieved by a solid-state conversion (or crystallite splitting) and subsequent crystallite growth, and the structural changes of the starting material related to the conversion were first observed by powder X-ray diffraction and scanning transmission electron microscopy as a result of finely tuned reaction system and preparation conditions. The structural changes were analyzed by model simulations and were attributed to the structural modulations that were concerned with the intralayer packing disorder and with two-dimensional long-range ordered structure, formed in MoO3 sheets of the hydrated molybdenum bronze. Moreover, the modulations were related to displacement defects of the Mo-O framework units generated along the [100] direction in the hydrated molybdenum bronze. Then, it was suggested that the solid-state conversion into blue molybdenum bronze and the crystallite splitting to nanomorphology were initiated by the breaking of the Mo-O-Mo bonds at the defects. [Figure not available: see fulltext.

Study of Traverse Speed Effects on Residual Stress State and Cavitation Erosion Behavior of Arc-Sprayed Aluminum Bronze Coatings

NASA Astrophysics Data System (ADS)

Hauer, Michél; Henkel, Knuth Michael; Krebs, Sebastian; Kroemmer, Werner

2017-01-01

Within a research project regarding cavitation erosion-resistant coatings, arc spraying was used with different traverse speeds to influence heat transfer and the resulting residual stress state. The major reason for this study is the lack of knowledge concerning the influence of residual stress distribution on mechanical properties and coating adhesion, especially with respect to heterogeneous aluminum bronze alloys. The materials used for spray experiments were the highly cavitation erosion-resistant propeller alloys CuAl9Ni5Fe4Mn (Ni-Al-Bronze) and CuMn13Al8Fe3Ni2 (Mn-Al-Bronze). Analyses of cavitation erosion behavior were carried out to evaluate the suitability for use in marine environments. Further microstructural, chemical and mechanical analyses were realized to examine adhesive and cohesive coating properties. Residual stress distribution was measured by modified hole drilling method using electronic speckle pattern interferometry (ESPI). It was found that the highest traverse speed led to higher tensile residual stresses near the surface and less cavitation erosion resistance of the coatings. Moreover, high oxygen affinity of main alloying element aluminum was identified to severely influence the microstructures by the formation of large oxides and hence the coating properties. Overall, Mn-Al-Bronze coatings showed lower residual stresses, a more homogeneous pore and oxide distribution and less material loss by cavitation than Ni-Al-Bronze coatings.

The Origins of Greek Civilization: From the Bronze Age to the Polis ca. 2500-600 B.C.

ERIC Educational Resources Information Center

Himmell, Rhoda; And Others

This document consists of three units in which students study and compare the two civilizations of ancient Greece, that of the Greek kingdoms of the second millennium B.C. and the city states of historical Greece, and learn how historians use archaeological evidence to reconstruct the history of Mycenaean Greece. Suggestions are included for…

Root canal morphology of Chalcolithic and early bronze age human populations of El Mirador Cave (Sierra de Atapuerca, Spain).

PubMed

Ceperuelo, Dolors; Lozano, Marina; Duran-Sindreu, Fernando; Mercadé, Montse

2014-12-01

This study provides a morphological characterization of the inner anatomy of the root canals of permanent first and second molars in Chalcolithic and early Bronze Age human fossils using cone-beam computed tomography. The general evolutionary trend in present-day human dentition is related to morphological simplification. As little is known about when this trend appeared in Homo sapiens populations, the aim of this work is to test the presence of modern radicular morphology 4,400 years ago. Fifty-four permanent first and second maxillary and mandibular molars of 17 individuals were included in the study. All maxillary first and second molars showed three separate roots. Almost all the lower molars analyzed (100% of first molars and 75% of second molars) had two separate roots. More differences in the canal system configuration were documented in the maxillary mesiobuccal roots than in the palatal or distobuccal roots. The most variable tooth in root and canal configuration is the maxillary second molar. It should be pointed out that 12.5% of the teeth analyzed showed a C-shaped root configuration. © 2014 Wiley Periodicals, Inc.

Therapy with saffron and the goddess at Thera.

PubMed

Ferrence, Susan C; Bendersky, Gordon

2004-01-01

This paper presents a new interpretation of a unique Bronze Age (c. 3000-1100 BCE) Aegean wall painting in the building of Xeste 3 at Akrotiri,Thera. Crocus carturightianus and its active principle, saffron, are the primary subjects at Xeste 3. Several lines of evidence suggest that the meaning of these frescoes concerns saffron and healing: (1) the unusual degree of visual attention given to the crocus, including the variety of methods for display of the stigmas; (2) the painted depiction of the line of saffron production from plucking blooms to the collection of stigmas; and (3) the sheer number (ninety) of medical indications for which saffron has been used from the Bronze Age to the present. The Xeste 3 frescoes appear to portray a divinity of healing associated with her phytotherapy, saffron. Cultural and commercial interconnections between the Therans, the Aegean world, and their neighboring civilizations in the early 2nd millennium BCE indicate a close network of thematic exchange, but there is no evidence that Akrotiri borrowed any of these medicinal (or iconographic) representations. The complex production line, the monumental illustration of a goddess of medicine with her saffron attribute, and this earliest botanically accurate image of an herbal medication are all Theran innovations.

Genomic insights into the origin of farming in the ancient Near East.

PubMed

Lazaridis, Iosif; Nadel, Dani; Rollefson, Gary; Merrett, Deborah C; Rohland, Nadin; Mallick, Swapan; Fernandes, Daniel; Novak, Mario; Gamarra, Beatriz; Sirak, Kendra; Connell, Sarah; Stewardson, Kristin; Harney, Eadaoin; Fu, Qiaomei; Gonzalez-Fortes, Gloria; Jones, Eppie R; Roodenberg, Songül Alpaslan; Lengyel, György; Bocquentin, Fanny; Gasparian, Boris; Monge, Janet M; Gregg, Michael; Eshed, Vered; Mizrahi, Ahuva-Sivan; Meiklejohn, Christopher; Gerritsen, Fokke; Bejenaru, Luminita; Blüher, Matthias; Campbell, Archie; Cavalleri, Gianpiero; Comas, David; Froguel, Philippe; Gilbert, Edmund; Kerr, Shona M; Kovacs, Peter; Krause, Johannes; McGettigan, Darren; Merrigan, Michael; Merriwether, D Andrew; O'Reilly, Seamus; Richards, Martin B; Semino, Ornella; Shamoon-Pour, Michel; Stefanescu, Gheorghe; Stumvoll, Michael; Tönjes, Anke; Torroni, Antonio; Wilson, James F; Yengo, Loic; Hovhannisyan, Nelli A; Patterson, Nick; Pinhasi, Ron; Reich, David

2016-08-25

We report genome-wide ancient DNA from 44 ancient Near Easterners ranging in time between ~12,000 and 1,400 bc, from Natufian hunter-gatherers to Bronze Age farmers. We show that the earliest populations of the Near East derived around half their ancestry from a 'Basal Eurasian' lineage that had little if any Neanderthal admixture and that separated from other non-African lineages before their separation from each other. The first farmers of the southern Levant (Israel and Jordan) and Zagros Mountains (Iran) were strongly genetically differentiated, and each descended from local hunter-gatherers. By the time of the Bronze Age, these two populations and Anatolian-related farmers had mixed with each other and with the hunter-gatherers of Europe to greatly reduce genetic differentiation. The impact of the Near Eastern farmers extended beyond the Near East: farmers related to those of Anatolia spread westward into Europe; farmers related to those of the Levant spread southward into East Africa; farmers related to those of Iran spread northward into the Eurasian steppe; and people related to both the early farmers of Iran and to the pastoralists of the Eurasian steppe spread eastward into South Asia.

Evidence that a West-East admixed population lived in the Tarim Basin as early as the early Bronze Age

PubMed Central

2010-01-01

Background The Tarim Basin, located on the ancient Silk Road, played a very important role in the history of human migration and cultural communications between the West and the East. However, both the exact period at which the relevant events occurred and the origins of the people in the area remain very obscure. In this paper, we present data from the analyses of both Y chromosomal and mitochondrial DNA (mtDNA) derived from human remains excavated from the Xiaohe cemetery, the oldest archeological site with human remains discovered in the Tarim Basin thus far. Results Mitochondrial DNA analysis showed that the Xiaohe people carried both the East Eurasian haplogroup (C) and the West Eurasian haplogroups (H and K), whereas Y chromosomal DNA analysis revealed only the West Eurasian haplogroup R1a1a in the male individuals. Conclusion Our results demonstrated that the Xiaohe people were an admixture from populations originating from both the West and the East, implying that the Tarim Basin had been occupied by an admixed population since the early Bronze Age. To our knowledge, this is the earliest genetic evidence of an admixed population settled in the Tarim Basin. PMID:20163704

Tracing the dynamic life story of a Bronze Age Female

NASA Astrophysics Data System (ADS)

Margarita Frei, Karin; Mannering, Ulla; Kristiansen, Kristian; Allentoft, Morten E.; Wilson, Andrew S.; Skals, Irene; Tridico, Silvana; Louise Nosch, Marie; Willerslev, Eske; Clarke, Leon; Frei, Robert

2015-05-01

Ancient human mobility at the individual level is conventionally studied by the diverse application of suitable techniques (e.g. aDNA, radiogenic strontium isotopes, as well as oxygen and lead isotopes) to either hard and/or soft tissues. However, the limited preservation of coexisting hard and soft human tissues hampers the possibilities of investigating high-resolution diachronic mobility periods in the life of a single individual. Here, we present the results of a multidisciplinary study of an exceptionally well preserved circa 3.400-year old Danish Bronze Age female find, known as the Egtved Girl. We applied biomolecular, biochemical and geochemical analyses to reconstruct her mobility and diet. We demonstrate that she originated from a place outside present day Denmark (the island of Bornholm excluded), and that she travelled back and forth over large distances during the final months of her life, while consuming a terrestrial diet with intervals of reduced protein intake. We also provide evidence that all her garments were made of non-locally produced wool. Our study advocates the huge potential of combining biomolecular and biogeochemical provenance tracer analyses to hard and soft tissues of a single ancient individual for the reconstruction of high-resolution human mobility.

Tracing the dynamic life story of a Bronze Age Female

PubMed Central

Margarita Frei, Karin; Mannering, Ulla; Kristiansen, Kristian; Allentoft, Morten E.; Wilson, Andrew S.; Skals, Irene; Tridico, Silvana; Louise Nosch, Marie; Willerslev, Eske; Clarke, Leon; Frei, Robert

2015-01-01

Ancient human mobility at the individual level is conventionally studied by the diverse application of suitable techniques (e.g. aDNA, radiogenic strontium isotopes, as well as oxygen and lead isotopes) to either hard and/or soft tissues. However, the limited preservation of coexisting hard and soft human tissues hampers the possibilities of investigating high-resolution diachronic mobility periods in the life of a single individual. Here, we present the results of a multidisciplinary study of an exceptionally well preserved circa 3.400-year old Danish Bronze Age female find, known as the Egtved Girl. We applied biomolecular, biochemical and geochemical analyses to reconstruct her mobility and diet. We demonstrate that she originated from a place outside present day Denmark (the island of Bornholm excluded), and that she travelled back and forth over large distances during the final months of her life, while consuming a terrestrial diet with intervals of reduced protein intake. We also provide evidence that all her garments were made of non-locally produced wool. Our study advocates the huge potential of combining biomolecular and biogeochemical provenance tracer analyses to hard and soft tissues of a single ancient individual for the reconstruction of high-resolution human mobility. PMID:25994525

Anthropogenic impact and lead pollution throughout the Holocene in Southern Iberia.

PubMed

García-Alix, A; Jimenez-Espejo, F J; Lozano, J A; Jiménez-Moreno, G; Martinez-Ruiz, F; García Sanjuán, L; Aranda Jiménez, G; García Alfonso, E; Ruiz-Puertas, G; Anderson, R Scott

2013-04-01

Present day lead pollution is an environmental hazard of global proportions. A correct determination of natural lead levels is very important in order to evaluate anthropogenic lead contributions. In this paper, the anthropogenic signature of early metallurgy in Southern Iberia during the Holocene, more specifically during the Late Prehistory, was assessed by mean of a multiproxy approach: comparison of atmospheric lead pollution, fire regimes, deforestation, mass sediment transport, and archeological data. Although the onset of metallurgy in Southern Iberia is a matter of controversy, here we show the oldest lead pollution record from Western Europe in a continuous paleoenvironmental sequence, which suggests clear lead pollution caused by metallurgical activities since ~3900 cal BP (Early Bronze Age). This lead pollution was especially important during Late Bronze and Early Iron ages. At the same time, since ~4000 cal BP, an increase in fire activity is observed in this area, which is also coupled with deforestation and increased erosion rates. This study also shows that the lead pollution record locally reached near present-day values many times in the past, suggesting intensive use and manipulation of lead during those periods in this area. Copyright © 2013 Elsevier B.V. All rights reserved.

Late Bronze Age climate change and the destruction of the Mycenaean Palace of Nestor at Pylos

PubMed Central

Holmgren, Karin; Shen, Chuan-Chou; Hu, Hsun-Ming; Boyd, Meighan; Stocker, Sharon

2017-01-01

This paper offers new high-resolution oxygen and carbon isotope data from Stalagmite S1 from Mavri Trypa Cave, SW Peloponnese. Our data provide the climate background to the destruction of the nearby Mycenaean Palace of Nestor at Pylos at the transition from Late Helladic (LH) IIIB to LH IIIC, ~3150–3130 years before present (before AD 1950, hereafter yrs BP) and the subsequent period. S1 is dated by 24 U-Th dates with an averaged precision of ±26 yrs (2σ), providing one of the most robust paleoclimate records from the eastern Mediterranean for the end of the Late Bronze Age (LBA). The δ18O record shows generally wetter conditions at the time when the Palace of Nestor at Pylos was destroyed, but a brief period of drier conditions around 3200 yrs BP may have disrupted the Mycenaean agricultural system that at the time was likely operating close to its limit. Gradually developing aridity after 3150 yrs BP, i.e. subsequent to the destruction, probably reduced crop yields and helped to erode the basis for the reinstitution of a central authority and the Palace itself. PMID:29281669

Late Bronze Age climate change and the destruction of the Mycenaean Palace of Nestor at Pylos.

PubMed

Finné, Martin; Holmgren, Karin; Shen, Chuan-Chou; Hu, Hsun-Ming; Boyd, Meighan; Stocker, Sharon

2017-01-01

This paper offers new high-resolution oxygen and carbon isotope data from Stalagmite S1 from Mavri Trypa Cave, SW Peloponnese. Our data provide the climate background to the destruction of the nearby Mycenaean Palace of Nestor at Pylos at the transition from Late Helladic (LH) IIIB to LH IIIC, ~3150-3130 years before present (before AD 1950, hereafter yrs BP) and the subsequent period. S1 is dated by 24 U-Th dates with an averaged precision of ±26 yrs (2σ), providing one of the most robust paleoclimate records from the eastern Mediterranean for the end of the Late Bronze Age (LBA). The δ18O record shows generally wetter conditions at the time when the Palace of Nestor at Pylos was destroyed, but a brief period of drier conditions around 3200 yrs BP may have disrupted the Mycenaean agricultural system that at the time was likely operating close to its limit. Gradually developing aridity after 3150 yrs BP, i.e. subsequent to the destruction, probably reduced crop yields and helped to erode the basis for the reinstitution of a central authority and the Palace itself.

Genomic insights into the origin of farming in the ancient Near East

PubMed Central

Lazaridis, Iosif; Nadel, Dani; Rollefson, Gary; Merrett, Deborah C.; Rohland, Nadin; Mallick, Swapan; Fernandes, Daniel; Novak, Mario; Gamarra, Beatriz; Sirak, Kendra; Connell, Sarah; Stewardson, Kristin; Harney, Eadaoin; Fu, Qiaomei; Gonzalez-Fortes, Gloria; Jones, Eppie R.; Roodenberg, Songül Alpaslan; Lengyel, György; Bocquentin, Fanny; Gasparian, Boris; Monge, Janet M.; Gregg, Michael; Eshed, Vered; Mizrahi, Ahuva-Sivan; Meiklejohn, Christopher; Gerritsen, Fokke; Bejenaru, Luminita; Blüher, Matthias; Campbell, Archie; Cavalleri, Gianpiero; Comas, David; Froguel, Philippe; Gilbert, Edmund; Kerr, Shona M.; Kovacs, Peter; Krause, Johannes; McGettigan, Darren; Merrigan, Michael; Merriwether, D. Andrew; O'Reilly, Seamus; Richards, Martin B.; Semino, Ornella; Shamoon-Pour, Michel; Stefanescu, Gheorghe; Stumvoll, Michael; Tönjes, Anke; Torroni, Antonio; Wilson, James F.; Yengo, Loic; Hovhannisyan, Nelli A.; Patterson, Nick; Pinhasi, Ron; Reich, David

2016-01-01

We report genome-wide ancient DNA from 44 ancient Near Easterners ranging in time between ~12,000-1,400 BCE, from Natufian hunter-gatherers to Bronze Age farmers. We show that the earliest populations of the Near East derived around half their ancestry from a ‘Basal Eurasian’ lineage that had little if any Neanderthal admixture and that separated from other non-African lineages prior to their separation from each other. The first farmers of the southern Levant (Israel and Jordan) and Zagros Mountains (Iran) were strongly genetically differentiated, and each descended from local hunter-gatherers. By the time of the Bronze Age, these two populations and Anatolian-related farmers had mixed with each other and with the hunter-gatherers of Europe to drastically reduce genetic differentiation. The impact of the Near Eastern farmers extended beyond the Near East: farmers related to those of Anatolia spread westward into Europe; farmers related to those of the Levant spread southward into East Africa; farmers related to those from Iran spread northward into the Eurasian steppe; and people related to both the early farmers of Iran and to the pastoralists of the Eurasian steppe spread eastward into South Asia. PMID:27459054

Human spiruridiasis due to Physaloptera spp. (Nematoda: Physalopteridae) in a grave of the Shahr-e Sukhteh archeological site of the Bronze Age (2800-2500 BC) in Iran.

PubMed

Makki, Mahsasadat; Dupouy-Camet, Jean; Seyed Sajjadi, Seyed Mansour; Moravec, František; Reza Naddaf, Saied; Mobedi, Iraj; Malekafzali, Hossein; Rezaeian, Mostafa; Mohebali, Mehdi; Kargar, Faranak; Mowlavi, Gholamreza

2017-01-01

Evidence of rare human helminthiasis in paleoparasitological records is scarce. we report here the finding of Physaloptera spp. eggs in a soil sample collected in the pelvic and sacrum bones area of a skeleton excavated from a grave of Shahr-e Sukhteh archeological site dating back to the Bronze Age. The site is located in southeastern Iran and has attracted the attention of numerous archeological teams owing to its vast expanse and diverse archeological findings since 1997. The spirurid nematodes Physaloptera spp. are rarely the cause of human helminthiasis nowadays, but this infection might not have been so rare in ancient populations such as those in the Shahr-e Sukhteh. Out of 320 skeletons analyzed in this study, only one parasitized individual was detected. This surprising result led us to suspect the role of nematophagous fungi and other taphonomic processes in possible false-negative results. This is the first paleoparasitological study on human remains in this archeological site and the first record of ancient human physalopterosis in the Middle East. © M. Makki et al., published by EDP Sciences, 2017.

Human spiruridiasis due to Physaloptera spp. (Nematoda: Physalopteridae) in a grave of the Shahr-e Sukhteh archeological site of the Bronze Age (2800–2500 BC) in Iran

PubMed Central

Makki, Mahsasadat; Dupouy-Camet, Jean; Seyed Sajjadi, Seyed Mansour; Moravec, František; Reza Naddaf, Saied; Mobedi, Iraj; Malekafzali, Hossein; Rezaeian, Mostafa; Mohebali, Mehdi; Kargar, Faranak; Mowlavi, Gholamreza

2017-01-01

Evidence of rare human helminthiasis in paleoparasitological records is scarce. we report here the finding of Physaloptera spp. eggs in a soil sample collected in the pelvic and sacrum bones area of a skeleton excavated from a grave of Shahr-e Sukhteh archeological site dating back to the Bronze Age. The site is located in southeastern Iran and has attracted the attention of numerous archeological teams owing to its vast expanse and diverse archeological findings since 1997. The spirurid nematodes Physaloptera spp. are rarely the cause of human helminthiasis nowadays, but this infection might not have been so rare in ancient populations such as those in the Shahr-e Sukhteh. Out of 320 skeletons analyzed in this study, only one parasitized individual was detected. This surprising result led us to suspect the role of nematophagous fungi and other taphonomic processes in possible false-negative results. This is the first paleoparasitological study on human remains in this archeological site and the first record of ancient human physalopterosis in the Middle East. PMID:28573969

Metrological assessment of the methods for measuring the contents of acids and ion metals responsible for the exchangeable acidity of soils

NASA Astrophysics Data System (ADS)

Vanchikova, E. V.; Shamrikova, E. V.; Bespyatykh, N. V.; Kyz"yurova, E. V.; Kondratenok, B. M.

2015-02-01

Metrological characteristics—precision, trueness, and accuracy—of the results of measurements of the exchangeable acidity and its components by the potentiometric titration method were studied on the basis of multiple analyses of the soil samples with the examination of statistical data for the outliers and their correspondence to the normal distribution. Measurement errors were estimated. The applied method was certified by the Metrological Center of the Uralian Branch of the Russian Academy of Sciences (certificate no. 88-17641-094-2013) and included in the Federal Information Fund on Assurance of Measurements (FR 1.31.2013.16382).

Bronze rainbow hologram mirrors

NASA Astrophysics Data System (ADS)

Dawson, P.

2006-02-01

This project draws on holographic embossing techniques, ancient artistic conventions of bronze mirror design and modelling and casting processes to accomplish portraiture of reflection. Laser scanning, 3D computer graphics and holographic imaging are employed to enable a permanent 3D static holographic image to appear integrated with the real-time moving reflection of a viewer's face in a polished bronze disc. The disc and the figure which holds it (caryatid) are cast in bronze from a lost wax model, a technique which has been used for millennia to make personal mirrors. The Caryatid form of bronze mirror which went through many permutations in ancient Egyptian, Greece and Rome shows a plethora of expressive figure poses ranging from sleek nudes to highly embellished multifigure arrangements. The prototype of this series was made for Australian choreographer Graeme Murphy, Artistic Director of the Sydney Dance Company. Each subsequent mirror will be unique in figure and holographic imagery as arranged between artist and subject. Conceptually this project references both the modern experience of viewing mirrors retrieved from ancient tombs, which due to deterioration of the surface no longer reflect, and the functioning of Chinese Magic mirrors, which have the ability to project a predetermined image. Inspired by the metaphorical potential of these mirrors, which do not reflect the immediate reality of the viewer, this bronze hologram mirror series enables each viewer to reflect upon himself or herself observing simultaneously the holographic image and their own partially obliterated reflection.

Accessory and rock forming minerals monitoring the evolution of zoned mafic ultramafic complexes in the Central Ural Mountains

NASA Astrophysics Data System (ADS)

Krause, J.; Brügmann, G. E.; Pushkarev, E. V.

2007-04-01

This study describes major and trace element compositions of accessory and rock forming minerals from three Uralian-Alaskan-type complexes in the Ural Mountains (Kytlym, Svetley Bor, Nizhnii Tagil) for the purpose of constraining the origin, evolution and composition of their parental melts. The mafic-ultramafic complexes in the Urals are aligned along a narrow, 900 km long belt. They consist of a central dunite body grading outward into clinopyroxenite and gabbro lithologies. Several of these dunite bodies have chromitites with platinum group element mineralization. High Fo contents in olivine (Fo 92-93) and high Cr/(Cr + Al) in spinel (0.67-0.84) suggest a MgO-rich (> 15 wt.%) and Al 2O 3-poor ultramafic parental magma. During its early stages the magma crystallized dominantly olivine, spinel and clinopyroxene forming cumulates of dunite, wehrlite and clinopyroxenite. This stage is monitored by a common decrease in the MgO content in olivine (Fo 93-86) and the Cr/(Cr + Al) value of coexisting accessory chromite (0.81-0.70). Subsequently, at subsolidus conditions, the chromite equilibrated with the surrounding silicates producing Fe-rich spinel while Al-rich spinel exsolved chromian picotite and chromian titanomagnetite. This generated the wide compositional ranges typical for spinel from Uralian-Alaskan-type complexes world wide. Laser ablation analyses (LA-ICPMS) reveal that clinopyroxene from dunites and clinopyroxenite from all three complexes have similar REE patterns with an enrichment of LREE (0.5-5.2 prim. mantle) and other highly incompatible elements (U, Th, Ba, Rb) relative to the HREE (0.25-2.0 prim. mantle). This large concentration range implies the extensive crystallization of olivine and clinopyroxene together with spinel from a continuously replenished, tapped and crystallizing magma chamber. Final crystallization of the melt in the pore spaces of the cooling cumulate pile explains the large variation in REE concentrations on the scale of a thin section, the REE-rich rims on zoned clinopyroxene phenocrysts (e.g. La Rim/La Core ˜ 2), and the formation of interstitial clinopyroxene with similar REE enrichment. Trace element patterns of the parental melt inferred from clinopyroxene analyses show negative anomalies for Ti, Zr, Hf, and a positive anomaly for Sr. These imply a subduction related geotectonic setting for the Uralian zoned mafic-ultramafic complexes. Ankaramites share many petrological and geochemical features with these complexes and could represent the parental melts of this class of mafic-ultramafic intrusions. Diopside from chromitites and cross cutting diopside veins in dunite has similar trace element patterns with LREE/HREE ratios (e.g. La/Lu = 5-60) much higher than those in diopside from all other lithologies. We suggest that the chromitites formed at high temperatures (800-900 °C) during the waning stages of solidification as a result of the interaction of an incompatible element-rich melt or fluid with the dunite cumulates.

Confirmation of the immunoreactivity of monoclonal anti-human C-terminal EGFR antibodies in bronze Corydoras Corydoras aeneus (Callichthyidae Teleostei) by Western Blot method.

PubMed

Mytych, Jennifer; Satora, Leszek; Kozioł, Katarzyna

2018-02-01

Bronze corydoras (Corydoras aeneus) uses the distal part of the intestine as accessory respiratory organ. Our previous study showed the presence of epidermal growth factor receptor (EGFR) cytoplasmic domain in the digestive tract of the bronze corydoras. In this study, using Western Blot method, we validated the results presented in the previous research. In detail, results of Western Blot analysis on digestive and respiratory part of bronze corydoras intestine homogenates confirmed the immunoreactivity of anti-cytoplasmic domain (C-terminal) human EGFR antibodies with protein band of approximately 180kDa (EGFR molecular weight). This indicates a high homology of EGFR domain between these species and the possibility of such antibody use in bronze corydoras. Statistically significantly higher EGFR expression was observed in the respiratory part of intestine when compared to the digestive part. This implies higher proliferation activity and angiogenesis of epithelium in this part of intestine, creating conditions for air respiration. Therefore, Corydoras aeneus may be considered as a model organism for the molecular studies of the mechanisms of epithelial proliferation initiation and inhibition depending on hypoxia and normoxia. Copyright © 2017. Published by Elsevier GmbH.

Holes in teeth - Dental caries in Neolithic and Early Bronze Age populations in Central Germany.

PubMed

Nicklisch, Nicole; Ganslmeier, Robert; Siebert, Angelina; Friederich, Susanne; Meller, Harald; Alt, Kurt W

2016-01-01

This study provides diachronic insight into the epidemiology of carious defects in teeth of Neolithic and Early Bronze Age populations in Central Germany over a period of 4000 years. The data were retrieved from skeletal remains uncovered at 21 sites throughout the Middle Elbe-Saale region (MES), comprising a total of 494 individuals with preserved teeth. The data generated were examined for age- and sex-related differences in order to gain information about the dietary habits and socio-economic structures of the period with the goal of identifying potential diachronic changes. The results indicated that dietary habits changed over the course of the Neolithic period: the prevalence of caries significantly decreased between the Early and Late Neolithic. The adults from the Early Neolithic sample, particularly those from the LBK bore the highest rate of caries. This highlights the essential importance of cereals in the diet of the early farmers in the Middle Elbe-Saale region. As time went on, meat and dairy products became more and more important, which had a positive impact on dental health. The data also show sex-specific differences: women were more often affected by caries than men and female jaws also generally exhibited greater numbers of carious teeth than their male counterparts. Dental health is a reflection of both biological factors and of economic and sociocultural structures. Copyright © 2015 Elsevier GmbH. All rights reserved.

The Initial Appearance of Ashlar Stone in Cyprus. éssues of Provenance and Use

NASA Astrophysics Data System (ADS)

Philokyprou, M.

In Cyprus stone was the primary building material, either as rubble or in a dressed form (called ashlar), since the Neolithic period. Initially stone was used only as rubble but later during the Late Brone Age ashlar stone appeared for the first time on the island. The aim of this paper is the presentation of the results of a systematic research regarding the different types and uses of ashlar stone and the techniques followed during the Late Bronze Age in Cyprus in comparison with other Mediterranean areas. The macroscopic and microscopic examination of selected samples showed that sedimentary rocks of various geological formations were used as ashlars. One, two or even three different types of stones were transported from the quarries nearest to the settlements. Some characteristic methods of stone dressing, such as finishing only the visible faces and creating drafted margins around the face of the ashlar blocks, are to be found not only in Late Bronze Age settlements but also in more recent examples from the last two centuries. The choice of ashlar and the methods of construction can be related to social, religious and political factors and were not only based on aesthetic criteria and practical issues. Thus, the most impressive structural solutions were followed in the construction of temples and public buildings, whereas more simple methods can be observed in residential complexes.

Detail view of the bronze gates, lit from behind by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail view of the bronze gates, lit from behind by the sun - United States Department of Commerce, Bounded by Fourteenth, Fifteenth, and E streets and Constitution Avenue, Washington, District of Columbia, DC

Bronze Alloy Development for Zinc Vapor Capture

DOE PAGES

Korinko, Paul S.

2017-04-24

After gamma-emitting 65Zinc was detected in a vacuum pumping system contained in a tritium glovebox, a series of experiments were undertaken to develop a method and material to trap zinc vapors in an area that is more suitable for preventing dose to workers. In this study, bronze alloys with 0–30% tin were prepared using a powder metallurgical process and exposed to three levels of zinc vapors. Furthermore, all of the alloys demonstrated acceptable zinc gettering capacity; however, low tin content bronzes are considered for further testing.

Electrochromic device containing metal oxide nanoparticles and ultraviolet blocking material

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garcia, Guillermo; Koo, Bonil; Gregoratto, Ivano

An electrochromic device includes a nanostructured transition metal oxide bronze layer that includes one or more transition metal oxide and one or more dopant. The electrochromic device also includes nanoparticles containing one or more transparent conducting oxide (TCO), a solid state electrolyte, a counter electrode, and at least one protective layer to prevent degradation of the one or more nanostructured transition metal oxide bronze. The nanostructured transition metal oxide bronze selectively modulates transmittance of near-infrared (NIR) and visible radiation as a function of an applied voltage to the device.

Technological and stylistic evaluation of the Early Bronze Age pottery at Tarsus-Gozlukule, Turkey: Pottery production and its interaction with economic, social, and cultural spheres

NASA Astrophysics Data System (ADS)

Unlu, Elif

This dissertation presents a technological and stylistic assessment of Early Bronze Age pottery production at Tarsus-Gozlukule, a multi-period mound settlement located in the Cilician Plain in southern Turkey. Pottery production, like all other man-made objects, is firstly a technological act. This dissertation maintains that material style (involving formal, technical, and decorative choices expressed by the artisan) of an artifact should be investigated as a whole as such an integrative study would be the most adequate way of understanding economic circumstances, social representation, and cultural boundaries. To facilitate this integrative investigation, seventy-two samples of Early Bronze Age pottery excavated from Tarsus-Gozlukule in the 1930s and 1940s.were selected for mineralogical, morphological, and chemical analyses. Petrographic and powder X-Ray Diffraction analyses were performed to determine the mineralogical makeup, Environmental Scanning Electron Microscope imagery was used to determine the morphology of these samples, and semi-quantitave Energy Dispersive X-Ray Spectroscopy analysis was performed on some samples to determine chemical properties of the clays. As a result of these scientific analyses various fabric groups were established. Afterwards formal shape and stylistic analysis was performed where shapes and surface treatments of the samples were analyzed and compared to the known local and non-local examples. Such an integrative approach to pottery production facilitates a better definition of the local pottery production process and enables an assessment of the technological know-how of the local pottery producers, their labor organization and its role within the operating markets, their function within the sociopolitical structure, and how such issues relate to the cultural boundaries within the community. Defining the paradigm of the local pottery production process leads to a broader investigation of issues related to the technological transfer of know-how and its social impact upon the pottery producers, the functional and symbolic role of the imported pottery and its local imitations within the community, and the significance of commodity exchange for the identity of individuals, networks of producers, and the community as a whole.

Evaluating the effectiveness of integrating food science lessons in high school Biology curriculum in comparison to high school Chemistry curriculum

NASA Astrophysics Data System (ADS)

Ilogebe, Amamchukwu Bernard

Binder-jet 3D printing has been one of the additive manufacturing techniques employed in fabrication of intricate parts, by utilizing metal powders. Liquid metal infiltration of bronze into binder-jet printed structural amorphous metal resulted in a net shape, fully-dense parts were made. The final part was characterized by means of scanning electron microscopy, electron dispersive x-ray spectroscopy and computed tomography. The densification in the binder-jet samples was also compared to die-pressed ones, and was found to be 3.96g/cm 3 and 3.89g/cm3. Thus, binder-jet can be used to model a die-pressed part. Scanning electron micrograph displayed the presence of considerable porosity in the sintered binder-jet samples, as well as some limited porosity in the infiltrated samples. Evident also from SEM analysis was the presence of internal powder micro pores. Electron dispersive spectroscopy results show that the bronze filled out the pores as was expected. According to the computed tomography results, the un-infiltrated sample has an average porosity of 34%, while the bronze-infiltrated samples have an average porosity of 1%. Micro-indentation was also performed on the infiltrated and uninfiltrated samples to evaluate the mechanical properties. The un-infiltrated sample had 2.98GPa hardness, while bronze infiltrated sample had 4.00GPa hardness using Vickers hardness method. Generally, it was found that infiltration of bronze into structural amorphous metal improved homogeneity of the material, as well as the mechanical properties. Further research needs to be done on the mechanical properties of binder-jet printed parts of SAM alloy, infiltrated with bronze. Variation of thickness needs to be included for further research to ascertain the critical achievable depth of infiltration using bronze as the reinforcement material.

Detail view of bronze light fixture on on north facade, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail view of bronze light fixture on on north facade, lower level - Blue Ridge Sanatorium, Building No. 1902, East side of State Route 20, .25 mile south of I-64, Charlottesville, Independent City, VA

Detail view of stylized railing and bronze light fixture on ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail view of stylized railing and bronze light fixture on southwest facade - Blue Ridge Sanatorium, Building No. 1901, East side of State Route 20, .25 mile south of I-64, Charlottesville, Independent City, VA

18. Photocopy of drawing of bronze dedication plaque, circa 1903 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Photocopy of drawing of bronze dedication plaque, circa 1903 (original drawing in possession of City Engineer's Office Grand Rapids, Michigan) DEDICATION PLAQUE. - Bridge Street Bridge, Spanning Grand River, Michigan & Bridge Streets, Grand Rapids, MI

Interior view, detail to show the ornate bronze doors to ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior view, detail to show the ornate bronze doors to the entrance lobby elevators - United States Department of Commerce, Bounded by Fourteenth, Fifteenth, and E streets and Constitution Avenue, Washington, District of Columbia, DC

The mystery of the missing Viking helmets.

PubMed

Wester, K

2000-11-01

Based on archaeological finds and old Norse literature, this study describes the Scandinavian helmet tradition from the Bronze Age to the Viking Age, as well as the Viking culture, with special emphasis on weaponry and head protection. Contrary to what is commonly believed, the study shows that metal helmets must have been used very infrequently by the Vikings. In fact, only one Viking helmet has been retrieved in Scandinavia. Possible reasons for the widespread misconception that the Vikings wore helmets are discussed, and the responsibility for not correcting this misunderstanding is placed with the archaeological profession.

[Where are all the Viking helmets?].

PubMed

Wester, K

2001-06-30

Based on archaeological finds and old Norse literature, this article describes the Scandinavian helmet tradition from the Bronze Age to the Viking Age, as well as the Viking culture, with special emphasis on weaponry, burial customs, and head protection. Contrary to what is commonly believed, metal helmets must have been used very infrequently by the Vikings. Only one Viking helmet has been retrieved in Scandinavia. Possible reasons for the wide-spread misunderstanding that the Vikings wore helmets are discussed. The archaeological profession must partly bear the responsibility for not correcting this misunderstanding.

Lessons Learned From the Affordable Care Act: The Premium Subsidy Design May Promote Adverse Selection.

PubMed

Graetz, Ilana; McKillop, Caitlin N; Kaplan, Cameron M; Waters, Teresa M

2017-05-01

Since 2014, average premiums for health plans available in the Affordable Care Act marketplaces have increased. We examine how premium price changes affected the amount consumers pay after subsidies for the lowest-cost bronze and silver plans available by age in the federally facilitated exchanges. Between 2015 and 2016, benchmark plan premiums increased in 83.3% of counties. Overall, rising benchmark premiums were associated with lower average after-subsidy premiums for the lowest-cost bronze and silver plans for older subsidy-eligible adults, but with higher after-subsidy premiums for younger adults purchasing the same plans, regardless of income. With recent discussions to replace or overhaul the Affordable Care Act, it is critical that we learn from the successes and failures of the current policy. Our findings suggest that the subsidy design, which makes rising premiums costlier for younger adults looking to purchase an entry-level plan, may be contributing to adverse selection and instability in the marketplace.

Copper and tin isotopic analysis of ancient bronzes for archaeological investigation: development and validation of a suitable analytical methodology.

PubMed

Balliana, Eleonora; Aramendía, Maite; Resano, Martin; Barbante, Carlo; Vanhaecke, Frank

2013-03-01

Although in many cases Pb isotopic analysis can be relied on for provenance determination of ancient bronzes, sometimes the use of "non-traditional" isotopic systems, such as those of Cu and Sn, is required. The work reported on in this paper aimed at revising the methodology for Cu and Sn isotope ratio measurements in archaeological bronzes via optimization of the analytical procedures in terms of sample pre-treatment, measurement protocol, precision, and analytical uncertainty. For Cu isotopic analysis, both Zn and Ni were investigated for their merit as internal standard (IS) relied on for mass bias correction. The use of Ni as IS seems to be the most robust approach as Ni is less prone to contamination, has a lower abundance in bronzes and an ionization potential similar to that of Cu, and provides slightly better reproducibility values when applied to NIST SRM 976 Cu isotopic reference material. The possibility of carrying out direct isotopic analysis without prior Cu isolation (with AG-MP-1 anion exchange resin) was investigated by analysis of CRM IARM 91D bronze reference material, synthetic solutions, and archaeological bronzes. Both procedures (Cu isolation/no Cu isolation) provide similar δ (65)Cu results with similar uncertainty budgets in all cases (±0.02-0.04 per mil in delta units, k = 2, n = 4). Direct isotopic analysis of Cu therefore seems feasible, without evidence of spectral interference or matrix-induced effect on the extent of mass bias. For Sn, a separation protocol relying on TRU-Spec anion exchange resin was optimized, providing a recovery close to 100 % without on-column fractionation. Cu was recovered quantitatively together with the bronze matrix with this isolation protocol. Isotopic analysis of this Cu fraction provides δ (65)Cu results similar to those obtained upon isolation using AG-MP-1 resin. This means that Cu and Sn isotopic analysis of bronze alloys can therefore be carried out after a single chromatographic separation using TRU-Spec resin. Tin isotopic analysis was performed relying on Sb as an internal standard used for mass bias correction. The reproducibility over a period of 1 month (n = 42) for the mass bias-corrected Sn isotope ratios is in the range of 0.06-0.16 per mil (2 s), for all the ratios monitored.

Study on acoustical properties of sintered bronze porous material for transient exhaust noise of pneumatic system

NASA Astrophysics Data System (ADS)

Li, Jingxiang; Zhao, Shengdun; Ishihara, Kunihiko

2013-05-01

A novel approach is presented to study the acoustical properties of sintered bronze material, especially used to suppress the transient noise generated by the pneumatic exhaust of pneumatic friction clutch and brake (PFC/B) systems. The transient exhaust noise is impulsive and harmful due to the large sound pressure level (SPL) that has high-frequency. In this paper, the exhaust noise is related to the transient impulsive exhaust, which is described by a one-dimensional aerodynamic model combining with a pressure drop expression of the Ergun equation. A relation of flow parameters and sound source is set up. Additionally, the piston acoustic source approximation of sintered bronze silencer with cylindrical geometry is presented to predict SPL spectrum at a far-field observation point. A semi-phenomenological model is introduced to analyze the sound propagation and reduction in the sintered bronze materials assumed as an equivalent fluid with rigid frame. Experiment results under different initial cylinder pressures are shown to corroborate the validity of the proposed aerodynamic model. In addition, the calculated sound pressures according to the equivalent sound source are compared with the measured noise signals both in time-domain and frequency-domain. Influences of porosity of the sintered bronze material are also discussed.

Cold Spraying of Cu-Al-Bronze for Cavitation Protection in Marine Environments

NASA Astrophysics Data System (ADS)

Krebs, S.; Gärtner, F.; Klassen, T.

2015-01-01

Traveling at high speeds, ships have to face the problem of rudder cavitation-erosion. At present, the problem is countered by fluid dynamically optimized rudders, synthetic, and weld-cladded coatings on steel basis. Nevertheless, docking and repair is required after certain intervals. Bulk Cu-Al-bronzes are in use at ships propellers to withstand corrosion and cavitation. Deposited as coatings with bulk-like properties, such bronzes could also enhance rudder life times. The present study investigates the coating formation by cold spraying CuAl10Fe5Ni5 bronze powders. By calculations of the impact conditions, the range of optimum spray parameters was preselected in terms of the coating quality parameter η on steel substrates with different temperatures. As-atomized and annealed powders were compared to optimize cavitation resistance of the coatings. Results provide insights about the interplay between the mechanical properties of powder and substrate for coating formation. Single particle impact morphologies visualize the deformation behavior. Coating performance was assessed by analyzing microstructures, bond strength, and cavitation resistance. These first results demonstrate that cold-sprayed bronze coatings have a high potential for ensuring a good performances in rudder protection. With further optimization, such coatings could evolve towards a competitive alternative to existing anti-cavitation procedures.

Oxygen isotope in archaeological bioapatites from India: Implications to climate change and decline of Bronze Age Harappan civilization.

PubMed

Sarkar, Anindya; Mukherjee, Arati Deshpande; Bera, M K; Das, B; Juyal, Navin; Morthekai, P; Deshpande, R D; Shinde, V S; Rao, L S

2016-05-25

The antiquity and decline of the Bronze Age Harappan civilization in the Indus-Ghaggar-Hakra river valleys is an enigma in archaeology. Weakening of the monsoon after ~5 ka BP (and droughts throughout the Asia) is a strong contender for the Harappan collapse, although controversy exists about the synchroneity of climate change and collapse of civilization. One reason for this controversy is lack of a continuous record of cultural levels and palaeomonsoon change in close proximity. We report a high resolution oxygen isotope (δ(18)O) record of animal teeth-bone phosphates from an archaeological trench itself at Bhirrana, NW India, preserving all cultural levels of this civilization. Bhirrana was part of a high concentration of settlements along the dried up mythical Vedic river valley 'Saraswati', an extension of Ghaggar river in the Thar desert. Isotope and archaeological data suggest that the pre-Harappans started inhabiting this area along the mighty Ghaggar-Hakra rivers fed by intensified monsoon from 9 to 7 ka BP. The monsoon monotonically declined after 7 ka yet the settlements continued to survive from early to mature Harappan time. Our study suggests that other cause like change in subsistence strategy by shifting crop patterns rather than climate change was responsible for Harappan collapse.

Ancient DNA provides new insights into the history of south Siberian Kurgan people.

PubMed

Keyser, Christine; Bouakaze, Caroline; Crubézy, Eric; Nikolaev, Valery G; Montagnon, Daniel; Reis, Tatiana; Ludes, Bertrand

2009-09-01

To help unravel some of the early Eurasian steppe migration movements, we determined the Y-chromosomal and mitochondrial haplotypes and haplogroups of 26 ancient human specimens from the Krasnoyarsk area dated from between the middle of the second millennium BC. to the fourth century AD. In order to go further in the search of the geographic origin and physical traits of these south Siberian specimens, we also typed phenotype-informative single nucleotide polymorphisms. Our autosomal, Y-chromosomal and mitochondrial DNA analyses reveal that whereas few specimens seem to be related matrilineally or patrilineally, nearly all subjects belong to haplogroup R1a1-M17 which is thought to mark the eastward migration of the early Indo-Europeans. Our results also confirm that at the Bronze and Iron Ages, south Siberia was a region of overwhelmingly predominant European settlement, suggesting an eastward migration of Kurgan people across the Russo-Kazakh steppe. Finally, our data indicate that at the Bronze and Iron Age timeframe, south Siberians were blue (or green)-eyed, fair-skinned and light-haired people and that they might have played a role in the early development of the Tarim Basin civilization. To the best of our knowledge, no equivalent molecular analysis has been undertaken so far.

Mid-late Holocene climate, demography, and cultural dynamics in Iberia: A multi-proxy approach

NASA Astrophysics Data System (ADS)

Lillios, Katina T.; Blanco-González, Antonio; Drake, Brandon Lee; López-Sáez, José Antonio

2016-03-01

Despite increasing interest in the relationship between culture transformation and abrupt climate change, their complexities are poorly understood. The local impact of global environmental fluctuations depends on multiple factors, and their effects on societal collapse are often assumed rather than demonstrated. One of the major changes in west European later prehistory was the Copper to Bronze Age transition, contemporaneous with the 4.2 ky cal. BP event. This article offers a multi-dimensional insight into this historical process in the Iberian Peninsula from a multi-proxy and comparative perspective. Three study areas, representative of diverse ecological settings and historical trajectories, are compared. Using radiocarbon dates, 13C discrimination (Δ13C) values on C3 plants, and high-resolution palynological records as palaeoclimatic and palaeodemographic proxies, this study tracks the uneven signals of Holocene climate. The wettest Northwest region features the most stable trend lines, whereas the Southwest exhibits an abrupt decrease in its demographic signals c. 4500 cal. BP, which is then followed by a subsequent rise in the neighbouring Southeast. These lines of evidence suggest the possibility, never previously noted, of demic migration from the Southwest to the Southeast in the Early Bronze Age as a contributing factor to the cultural dynamics of southern Iberia.

Stratospheric Ozone destruction by the Bronze-Age Minoan eruption (Santorini Volcano, Greece)

PubMed Central

Cadoux, Anita; Scaillet, Bruno; Bekki, Slimane; Oppenheimer, Clive; Druitt, Timothy H.

2015-01-01

The role of volcanogenic halogen-bearing (i.e. chlorine and bromine) compounds in stratospheric ozone chemistry and climate forcing is poorly constrained. While the 1991 eruption of Pinatubo resulted in stratospheric ozone loss, it was due to heterogeneous chemistry on volcanic sulfate aerosols involving chlorine of anthropogenic rather than volcanogenic origin, since co-erupted chlorine was scavenged within the plume. Therefore, it is not known what effect volcanism had on ozone in pre-industrial times, nor what will be its role on future atmospheres with reduced anthropogenic halogens present. By combining petrologic constraints on eruption volatile yields with a global atmospheric chemistry-transport model, we show here that the Bronze-Age ‘Minoan’ eruption of Santorini Volcano released far more halogens than sulfur and that, even if only 2% of these halogens reached the stratosphere, it would have resulted in strong global ozone depletion. The model predicts reductions in ozone columns of 20 to >90% at Northern high latitudes and an ozone recovery taking up to a decade. Our findings emphasise the significance of volcanic halogens for stratosphere chemistry and suggest that modelling of past and future volcanic impacts on Earth’s ozone, climate and ecosystems should systematically consider volcanic halogen emissions in addition to sulfur emissions. PMID:26206616

Stratospheric Ozone destruction by the Bronze-Age Minoan eruption (Santorini Volcano, Greece).

PubMed

Cadoux, Anita; Scaillet, Bruno; Bekki, Slimane; Oppenheimer, Clive; Druitt, Timothy H

2015-07-24

The role of volcanogenic halogen-bearing (i.e. chlorine and bromine) compounds in stratospheric ozone chemistry and climate forcing is poorly constrained. While the 1991 eruption of Pinatubo resulted in stratospheric ozone loss, it was due to heterogeneous chemistry on volcanic sulfate aerosols involving chlorine of anthropogenic rather than volcanogenic origin, since co-erupted chlorine was scavenged within the plume. Therefore, it is not known what effect volcanism had on ozone in pre-industrial times, nor what will be its role on future atmospheres with reduced anthropogenic halogens present. By combining petrologic constraints on eruption volatile yields with a global atmospheric chemistry-transport model, we show here that the Bronze-Age 'Minoan' eruption of Santorini Volcano released far more halogens than sulfur and that, even if only 2% of these halogens reached the stratosphere, it would have resulted in strong global ozone depletion. The model predicts reductions in ozone columns of 20 to >90% at Northern high latitudes and an ozone recovery taking up to a decade. Our findings emphasise the significance of volcanic halogens for stratosphere chemistry and suggest that modelling of past and future volcanic impacts on Earth's ozone, climate and ecosystems should systematically consider volcanic halogen emissions in addition to sulfur emissions.

Gold and gold working in Late Bronze Age Northern Greece.

PubMed

Vavelidis, M; Andreou, S

2008-04-01

Numerous objects of gold displaying an impressive variety of types and manufacturing techniques are known from the Late Bronze Age (LBA) contexts of Mycenaean Greece, but very little is known about the origin and processing of gold during the second millennium B.C: . Ancient literature and recent research indicate that northern Greece is probably the richest gold-bearing region in Greece, and yet, very little evidence exists regarding the exploitation of its deposits and the production as well as use of gold in the area during prehistory. The unusual find of a group of small stone crucibles at the prehistoric settlement of Thessaloniki Toumba, one with visible traces of gold melting, proves local production and offers a rare opportunity to examine the process of on-site gold working. Furthermore, the comparison of the chemical composition of prehistoric artefacts from two settlements with those of gold deposits in their immediate areas supports the local extraction of gold and opens up the prospect for some of the Mycenaean gold to have originated in northern Greece. The scarcity of gold items in northern Greek LBA contexts may not represent the actual amount of gold produced and consumed, but could be a result of the local social attitudes towards the circulation and deposition of artefacts from precious metals.

Gold and gold working in Late Bronze Age Northern Greece

NASA Astrophysics Data System (ADS)

Vavelidis, M.; Andreou, S.

2008-04-01

Numerous objects of gold displaying an impressive variety of types and manufacturing techniques are known from the Late Bronze Age (LBA) contexts of Mycenaean Greece, but very little is known about the origin and processing of gold during the second millennium b.c. Ancient literature and recent research indicate that northern Greece is probably the richest gold-bearing region in Greece, and yet, very little evidence exists regarding the exploitation of its deposits and the production as well as use of gold in the area during prehistory. The unusual find of a group of small stone crucibles at the prehistoric settlement of Thessaloniki Toumba, one with visible traces of gold melting, proves local production and offers a rare opportunity to examine the process of on-site gold working. Furthermore, the comparison of the chemical composition of prehistoric artefacts from two settlements with those of gold deposits in their immediate areas supports the local extraction of gold and opens up the prospect for some of the Mycenaean gold to have originated in northern Greece. The scarcity of gold items in northern Greek LBA contexts may not represent the actual amount of gold produced and consumed, but could be a result of the local social attitudes towards the circulation and deposition of artefacts from precious metals.

Geoarchaeology and aggradation around Kinet Höyük, an archaeological mound in the Eastern Mediterranean, Turkey

NASA Astrophysics Data System (ADS)

Beach, Timothy P.; Luzzadder-Beach, Sheryl

2008-10-01

We examined the alluvial history of the plain near Kinet Höyük, an archaeological mound (or Tell) with a sequence of six millennia of occupation on the southeast Mediterranean coast of Turkey, through 17 excavations over a 1000 m transect near the Mound. Excavations ranged from 2 to 6 m deep and up to 20 m across. This low gradient, alluvial plain shows significantly different rates and processes of near-Mound sedimentation, with one unit having nearly 4 m of Late Bronze Age habitation and flood deposits and another having 4 m of Hellenistic channel and floodplain deposition. This flat, alluvial surface turns out to be a rich geoarchaeological landscape that shrouds Early and Late Bronze Age settlements, Hellenistic walls, and two epochs of Roman Roads. One widespread phenomenon was a Hellenistic or earlier paleosol and occupation level covered by channel gravels and overbank deposits mostly from the Hellenistic to the Late Roman period. These channel and floodplain deposits filled in and flattened out the off-Mound settlements, blanketing the Pre-Hellenistic topography and silting in a long active port. This glut of alluvium correlates in time with drier conditions and the most intensive land uses in the watershed, where Roman and Hellenistic sites today are severely eroded.

Oxygen isotope in archaeological bioapatites from India: Implications to climate change and decline of Bronze Age Harappan civilization

PubMed Central

Sarkar, Anindya; Mukherjee, Arati Deshpande; Bera, M. K.; Das, B.; Juyal, Navin; Morthekai, P.; Deshpande, R. D.; Shinde, V. S.; Rao, L. S.

2016-01-01

The antiquity and decline of the Bronze Age Harappan civilization in the Indus-Ghaggar-Hakra river valleys is an enigma in archaeology. Weakening of the monsoon after ~5 ka BP (and droughts throughout the Asia) is a strong contender for the Harappan collapse, although controversy exists about the synchroneity of climate change and collapse of civilization. One reason for this controversy is lack of a continuous record of cultural levels and palaeomonsoon change in close proximity. We report a high resolution oxygen isotope (δ18O) record of animal teeth-bone phosphates from an archaeological trench itself at Bhirrana, NW India, preserving all cultural levels of this civilization. Bhirrana was part of a high concentration of settlements along the dried up mythical Vedic river valley ‘Saraswati’, an extension of Ghaggar river in the Thar desert. Isotope and archaeological data suggest that the pre-Harappans started inhabiting this area along the mighty Ghaggar-Hakra rivers fed by intensified monsoon from 9 to 7 ka BP. The monsoon monotonically declined after 7 ka yet the settlements continued to survive from early to mature Harappan time. Our study suggests that other cause like change in subsistence strategy by shifting crop patterns rather than climate change was responsible for Harappan collapse. PMID:27222033

Paleoenvironmental reconstruction of the early Neolithic to middle Bronze Age Peña Larga rock shelter (Álava, Spain) from the small mammal record

NASA Astrophysics Data System (ADS)

Rofes, Juan; Zuluaga, Mari Cruz; Murelaga, Xabier; Fernández-Eraso, Javier; Bailon, Salvador; Iriarte, María José; Ortega, Luis Ángel; Alonso-Olazabal, Ainhoa

2013-03-01

The Peña Larga site, a rock shelter on the southern slopes of the Cantabrian cordillera (north Spain), is an archeological deposit covering nearly 4000 years, from the early Neolithic to the middle Bronze Age (Atlantic/Subboreal chronozones). It was used both as a household and as a stable, with a hiatus in the Chalcolithic when it was used as a collective sepulcher. Nearly twenty-eight thousand small vertebrate elements were recovered from its seven stratigraphic units, of which 2553 items were identified to the genus and/or species levels. The assemblage is composed of mammals, birds, reptiles, and amphibians. Of these, small mammals were used for paleoenvironmental reconstruction since they are very sensitive to climatic conditions, the sample sizes are large, and their preservation is good. Their distributions over time, measured in terms of relative abundance, serve as reliable proxies of habitat and climate change. The reconstruction of Peña Larga's past environments based on small mammals roughly coincides with the pollen and the amphibian/reptile records on the local scale, and with that of an ice core from Central Greenland on the global scale. This makes it a valuable tool for comparative purposes both in the regional and continental scales.

Etiology of bronze leaf disease of Populus

Treesearch

Jason A. Smith; R. A. Blanchette; M. E. Ostry; N. A. Anderson

2002-01-01

Bronze leaf disease is a potentially destructive disorder of the Populus section of the genus Populus. The causal agent has been reported to be Apioplagiostoma populi (anarnorph: Discula sp.). Based on etiological and symptomological studies, field observations of symptom development suggest that the pathogen...

Specific corrosion product on interior surface of a bronze wine vessel with loop-handle and its growth mechanism, Shang Dynasty, China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li Yang; Bao Zhirong; Wu Taotao

In this paper, a kind of specific stalactitic product was found on the interior surface of a covered bronze wine vessel with loop-handle (Chinese name is you), which was fabricated in Shang Dynasty (1700 B.C.-1100 B.C.) and now is collected in Xiaogan Museum, Hubei province of China. The microstructures of the product were characterized systematically by using optical microscopy, scanning electron microscope, transmission electron microscope, X-ray diffraction, and Raman microscopy. The experimental results revealed that the product belonged to a kind of malachite with high purity and high crystallinity. The growth of the product was considered to be a possiblemore » reason that the vessel was overly airtight within a museum display cabinet besides a lid of the vessel, which made the excess of H{sub 2}O and CO{sub 2} gas concentrations inside the vessel during long-term storage. This corrosion product is very harmful to bronze cultural relics, because of a large amount of copper consumption from the matrix which will reduce its life. The growth mechanism of the specific stalactitic product and the suggestions for preservation of the similar bronze relics in museum were proposed. - Highlights: Black-Right-Pointing-Pointer The stalactitic product was the high purity and good crystallinity malachite. Black-Right-Pointing-Pointer Its growth was related to the excess of H{sub 2}O and CO{sub 2} gas concentrations in museum. Black-Right-Pointing-Pointer It is harmful to the bronzes, because copper will be consumed from the matrix. Black-Right-Pointing-Pointer The suggestions for preservation of the similar bronzes in museum were proposed.« less

Detail view to show the bronze gates hanging in the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail view to show the bronze gates hanging in the driveway portals; the open grille is foliated and crowned with patriotic eagle emblems - United States Department of Commerce, Bounded by Fourteenth, Fifteenth, and E streets and Constitution Avenue, Washington, District of Columbia, DC

New archaeomagnetic directions from Portugal and evolution of the geomagnetic field in Iberia from Late Bronze Age to Roman Times

NASA Astrophysics Data System (ADS)

Palencia-Ortas, A.; Osete, M. L.; Campuzano, S. A.; McIntosh, G.; Larrazabal, J.; Sastre, J.; Rodriguez-Aranda, J.

2017-09-01

This study presents new archaeomagnetic results from 33 combustion structures (kilns and hearths) from the archaeological sites of Castelinho, Crestelos, Olival Poço da Barca and Fonte do Milho in NE Portugal. The age of the investigated structures ranges from 1210 BC to 200 AD according to calibrated radiocarbon dating, thermoluminescence dating and archaeological constraints. Stepwise thermal and alternating field demagnetization isolate a single, stable, characteristic remanence component with very well defined directions. Rock magnetic analyses suggest low-Ti titanomagnetite/maghemite as the main magnetic carrier of the remanence. Mean directions are well grouped in most structures. The effect of thermoremanent anisotropy on mean directions has been evaluated and was found to be important. Inclination increases of between 2° and 13° after applying the anisotropy correction at specimen level. This highlights the requirement of evaluating this effect on the directions of small and flattened thin kilns and hearths. The 31 new directional data improve both the temporal and spatial distribution of the Iberian archaeomagnetic dataset from Late Bronze Age to Roman Times. Finally, a new directional palaeosecular variation curve for Iberia for the last twelve centuries BC is proposed. The curve has been computed using the bootstrap method and includes data coming from sites within 900 km of Madrid. The new palaeodirectional secular variation curve for Iberia is consistent with the Western European palaeosecular variation curve and with the prediction of regional European models.

Three Thousand Years of Continuity in the Maternal Lineages of Ancient Sheep (Ovis aries) in Estonia

PubMed Central

Rannamäe, Eve; Lõugas, Lembi; Speller, Camilla F.; Valk, Heiki; Maldre, Liina; Wilczyński, Jarosław; Mikhailov, Aleksandr; Saarma, Urmas

2016-01-01

Although sheep (Ovis aries) have been one of the most exploited domestic animals in Estonia since the Late Bronze Age, relatively little is known about their genetic history. Here, we explore temporal changes in Estonian sheep populations and their mitochondrial genetic diversity over the last 3000 years. We target a 558 base pair fragment of the mitochondrial hypervariable region in 115 ancient sheep from 71 sites in Estonia (c. 1200 BC–AD 1900s), 19 ancient samples from Latvia, Russia, Poland and Greece (6800 BC–AD 1700), as well as 44 samples of modern Kihnu native sheep breed. Our analyses revealed: (1) 49 mitochondrial haplotypes, associated with sheep haplogroups A and B; (2) high haplotype diversity in Estonian ancient sheep; (3) continuity in mtDNA haplotypes through time; (4) possible population expansion during the first centuries of the Middle Ages (associated with the establishment of the new power regime related to 13th century crusades); (5) significant difference in genetic diversity between ancient populations and modern native sheep, in agreement with the beginning of large-scale breeding in the 19th century and population decline in local sheep. Overall, our results suggest that in spite of the observed fluctuations in ancient sheep populations, and changes in the natural and historical conditions, the utilisation of local sheep has been constant in the territory of Estonia, displaying matrilineal continuity from the Middle Bronze Age through the Modern Period, and into modern native sheep. PMID:27732668

76 FR 7584 - Matthews International Corporation, Bronze Division, Kingwood, WV; Notice of Affirmative...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-10

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,953] Matthews International Corporation, Bronze Division, Kingwood, WV; Notice of Affirmative Determination Regarding Application for.... Conclusion After careful review of the application, I conclude that the claim is of sufficient weight to...

Gold, Silver and Bronze Citations.

ERIC Educational Resources Information Center

American School & University, 2003

2003-01-01

Presents the gold, silver, and bronze winners of a competition, which judged the most outstanding learning environments at educational institutions nationwide. Jurors spent two days reviewing projects, focusing on concepts and ideas that made them exceptional. For each citation, the article offers information on the firm, client, total area, total…

Genetic variation of the bronze locus (MC1R) in turkeys from Southern Brazil

PubMed Central

Corso, Josmael; Hepp, Diego; Ledur, Mônica C.; Peixoto, Jane O.; Fagundes, Nelson J. R.; Freitas, Thales R. O.

2017-01-01

Abstract Domestic turkeys present several color phenotypes controlled by at least five genetic loci, but only one of these has been identified precisely: the bronze locus, which turned out to be the melanocortin-1 receptor (MC1R) gene. MC1R variation is important for breeders interested in maintaining or developing different color varieties. In this study, we sequenced most of the MC1R gene from 16 White Holland (the main commercial turkey variety) and 19 pigmented turkeys from southern Brazil with two purposes. The first was to describe the MC1R diversity in White Holland turkeys, which may serve as reservoirs of genetic diversity at this locus. The second was to test whether the traditional color classification used by Brazilian breeders is related to previously known MC1R alleles. White Holland turkeys had four different haplotypes corresponding to the bronze (b +) and black-winged bronze (b 1) alleles. Pigmented turkeys also had four haplotypes corresponding to the b + and b 1 alleles, but different haplotypes represent the most common b + allele in these two groups. The black (B) allele was absent from our samples. Overall, our results suggest that white and pigmented individuals form two different populations, and that the traditional color classification used by Brazilian breeders cannot accurately predict the genotypes at the bronze locus. PMID:28323301

Genetic variation of the bronze locus (MC1R) in turkeys from Southern Brazil.

PubMed

Corso, Josmael; Hepp, Diego; Ledur, Mônica C; Peixoto, Jane O; Fagundes, Nelson J R; Freitas, Thales R O

2017-01-01

Domestic turkeys present several color phenotypes controlled by at least five genetic loci, but only one of these has been identified precisely: the bronze locus, which turned out to be the melanocortin-1 receptor (MC1R) gene. MC1R variation is important for breeders interested in maintaining or developing different color varieties. In this study, we sequenced most of the MC1R gene from 16 White Holland (the main commercial turkey variety) and 19 pigmented turkeys from southern Brazil with two purposes. The first was to describe the MC1R diversity in White Holland turkeys, which may serve as reservoirs of genetic diversity at this locus. The second was to test whether the traditional color classification used by Brazilian breeders is related to previously known MC1R alleles. White Holland turkeys had four different haplotypes corresponding to the bronze (b+) and black-winged bronze (b1) alleles. Pigmented turkeys also had four haplotypes corresponding to the b+ and b1 alleles, but different haplotypes represent the most common b+ allele in these two groups. The black (B) allele was absent from our samples. Overall, our results suggest that white and pigmented individuals form two different populations, and that the traditional color classification used by Brazilian breeders cannot accurately predict the genotypes at the bronze locus.

An interdisciplinary tillage erosion experiment: establishing a new field in grassland with reconstructed ard plough of the Bronze Age - Iron Age

NASA Astrophysics Data System (ADS)

Pavelka, Jan; Smetanová, Anna; Rejman, Jerzy; Kováčik, Peter

2017-04-01

Despite recognising the role of tillage erosion in landforms evolution, little research has documented its effects in prehistoric times. Herein, an interdisciplinary archaeological-geomorphological experiment with reconstructed tillage tools and management was conducted in order to measure tillage erosion when a new field in grasslands was established in the Bronze Age-Iron Age. Three wooden ards were reconstructed based on archaeological findings. They were tested in a cross-tillage experiment, consisting of a tillage pass perpendicular to the primary slope (6.5-9.7%), and a second tillage pass parallel to the primary slope of a convex-convex ridge with mowed grass (0.2 m high, vegetation cover >90%). The standard sole ard proved to be the most effective, with a mean tillage depth of 0.12 m, a mean tillage speed of 3.8 km h-1, and a mean distance between furrows of 0.20-0.25 m. Only 13% of the 264 tracers placed on 6 transects were displaced, and the mean tracers displacement parallel to the primary slope was 0.04 ± 0.17 m. Contour tillage perpendicular to primary slope created V or U shaped furrows with a mean depth of 0.1-0.12 m, a mean width of 0.05-0.1 m, and incision under the main root zone. Only soil in direct contact with the ard was displaced, with a mean translocation distance of 0.06 ± 0.2 m parallel and 0.06 ± 0.3 m perpendicular to the primary slope. During tillage parallel to slope, soil clods of 0.20 x 0.25 x 0.10 m were created and slightly disturbed or turned over one another. The tracers moved within the furrows and with the soil clods. Loose soil, resembling a seedbed, was not covered by soil clods. Mean displacement during the second pass was 0.03 ± 0.19 m parallel and 0.00 ± 0.15 m perpendicular to primary slope. The displacement from cross-tillage with a wooden ard in permanent grasslands was lower than many previously measured values of traditional animal-powered metal ploughs in permanent fields. No relationship between mean soil displacement and slope gradient was found. Dense vegetation and root structure influenced ard soil-penetration, its movement within the soil, and the displacement of tracers packed between the roots. Cross-tillage with a wooden ard proved to be insufficient for seedbed preparation. The results suggest that grazing or fire management, followed by repeated tillage with ard or hoe in order to destroy soil clods were necessary to establish a new field in grasslands during the Bronze Age-Iron Age.

Citizen Warrior: Major General Joshua Lawrence Chamberlain a Study in Command Leadership

DTIC Science & Technology

2012-04-29

1999) p. 303. 44 Wallace, p. 68. 45 James E. Kelly, Generals in Bronze, ed. William B. Styple, read Patrick Cullen (Ashland, Blackstone Audio, Inc...Bronze, ed. William B. Styple, read Patrick Cullen. Ashland, Blackstone Audio, Inc., 2008. Knott, Steven W. “Knowledge Must Become Capability

15. A CLOSE UP VIEW OF ONE OF THE EXPOSED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. A CLOSE UP VIEW OF ONE OF THE EXPOSED AGGREGATE LAMP STANDARDS, ITS BRONZE DECORATED FERRULE AND BRONZE LENS RECEIVER. - County Line Bridge, Spanning St. Joseph River at State Route 219, 0.6 mile south of U.S. Route 20, Osceola, St. Joseph County, IN

46 CFR 162.017-3 - Materials, construction, and workmanship.

Code of Federal Regulations, 2010 CFR

2010-10-01

... serviceability. (b) Bodies of pressure-vacuum relief valves must be made of bronze or such corrosion-resistant..., and seats shall be made of bronze or such corrosion-resistant material as may be approved by the... springs shall be made of corrosion-resistant material. Springs plated with corrosion-resistant material...

7 CFR 51.1145 - U.S. No. 1 Bronze.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Internal quality: Lots meeting the internal requirements for “U.S. Grade AA Juice (Double A)” or “U.S... 7 Agriculture 2 2010-01-01 2010-01-01 false U.S. No. 1 Bronze. 51.1145 Section 51.1145 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...

46 CFR 193.10-10 - Fire hydrants and hose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... decks where no protection is afforded to the hose in heavy weather, the hose may be temporarily removed... a garden hose nozzle that is bronze or metal with strength and corrosion resistance equivalent to... and couplings shall be as follows: (1) Couplings shall be of brass, bronze, or other equivalent metal...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mattox, Tracy M.; Koo, Bonil; Garcia, Guillermo

An electrochromic device includes a nanostructured transition metal oxide bronze layer that includes one or more transition metal oxide and one or more dopant, a solid state electrolyte, and a counter electrode. The nanostructured transition metal oxide bronze selectively modulates transmittance of near-infrared (NIR) spectrum and visible spectrum radiation as a function of an applied voltage to the device.

Interface thermal conductance characterization by infrared thermography: A tool for the study of insertions in bronze ancient Statuary

NASA Astrophysics Data System (ADS)

Mercuri, F.; Caruso, G.; Orazi, N.; Zammit, U.; Cicero, C.; Colacicchi Alessandri, O.; Ferretti, M.; Paoloni, S.

2018-05-01

In this paper, a new method based on the use of infrared thermography is proposed for the characterization of repairs and inserted parts on ancient bronzes. In particular, the quality of the contact between different kind of insertions and the main body of bronze statues is investigated by analysing the heat conduction process occurring across the interface between them. The thermographic results have been used to establish the nature of these inserted elements and the way they have been coupled to the main body of the statue during and after the manufacturing process. A model for the heat conduction based on the numerical finite elements method has been applied to compare the obtained results to the theoretical predictions. Measurements have been first carried out on test samples and then in the field on the Boxer at Rest (Museo Nazionale Romano in Rome), a masterpiece of the Greek Statuary, which contains a large variety of inserted items and repairs which are typical of the manufacturing process of bronze artefacts in general.

Band structure of the quasi two-dimensional purple molybdenum bronze

NASA Astrophysics Data System (ADS)

Guyot, H.; Balaska, H.; Perrier, P.; Marcus, J.

2006-09-01

The molybdenum purple bronze KMo 6O 17 is quasi two-dimensional (2D) metallic oxide that shows a Peierls transition towards a metallic charge density wave state. Since this specific transition is directly related to the electron properties of the normal state, we have investigated the electronic structure of this bronze at room temperature. The shape of the Mo K1s absorption edge reveals the presence of distorted MoO 6 octahedra in the crystallographic structure. Photoemission experiments evidence a large conduction band, with a bandwidth of 800 meV and confirm the metallic character of this bronze. A wide depleted zone separates the conduction band from the valence band that exhibits a fourfold structure, directly connected to the octahedral symmetry of the Mo sites. The band structure is determined by ARUPS in two main directions of the (0 0 1) Brillouin zone. It exhibits some unpredicted features but corroborates the earlier theoretical band structure and Fermi surface. It confirms the hidden one-dimensionality of KMo 6O 17 that has been proposed to explain the origin of the Peierls transition in this 2D compound.

Escalation of a coevolutionary arms race through host rejection of brood parasitic young.

PubMed

Langmore, Naomi E; Hunt, Sarah; Kilner, Rebecca M

2003-03-13

Cuckoo nestlings that evict all other young from the nest soon after hatching impose a high reproductive cost on their hosts. In defence, hosts have coevolved strategies to prevent brood parasitism. Puzzlingly, they do not extend beyond the egg stage. Thus, hosts adept at recognizing foreign eggs remain vulnerable to exploitation by cuckoo nestlings. Here we show that the breach of host egg defences by cuckoos creates a new stage in the coevolutionary cycle. We found that defences used during the egg-laying period by host superb fairy-wrens (Malurus cyaneus) are easily evaded by the Horsfield's bronze-cuckoo (Chrysococcyx basalis), a specialist fairy-wren brood parasite. However, although hosts never deserted their own broods, they later abandoned 40% of nests containing a lone Horsfield's bronze-cuckoo nestling, and 100% of nests with a lone shining bronze-cuckoo nestling (Chrysococcyx lucidus), an occasional fairy-wren brood parasite. Our experiments demonstrate that host discrimination against evictor-cuckoo nestlings is possible, and suggest that it has selected for the evolution of nestling mimicry in bronze-cuckoos.

A theoretical and experimental study on the pulsed laser dressing of bronze-bonded diamond grinding wheels

NASA Astrophysics Data System (ADS)

Deng, H.; Chen, G. Y.; Zhou, C.; Zhou, X. C.; He, J.; Zhang, Y.

2014-09-01

A series of theoretical analyses and experimental investigations were performed to examine a pulsed fiber-laser tangential profiling and radial sharpening technique for bronze-bonded diamond grinding wheels. The mechanisms for the pulsed laser tangential profiling and radial sharpening of grinding wheels were theoretically analyzed, and the four key processing parameters that determine the quality, accuracy, and efficiency of pulsed laser dressing, namely, the laser power density, laser spot overlap ratio, laser scanning track line overlap ratio, and number of laser scanning cycles, were proposed. Further, by utilizing cylindrical bronze wheels (without diamond grains) and bronze-bonded diamond grinding wheels as the experimental subjects, the effects of these four processing parameters on the removal efficiency and the surface smoothness of the bond material after pulsed laser ablation, as well as the effects on the contour accuracy of the grinding wheels, the protrusion height of the diamond grains, the sharpness of the grain cutting edges, and the graphitization degree of the diamond grains after pulsed laser dressing, were explored. The optimal values of the four key processing parameters were identified.

Protection of bronze artefacts through polymeric coatings based on nanocarriers filled with corrosion inhibitors

NASA Astrophysics Data System (ADS)

de Luna, Martina Salzano; Buonocore, Giovanna; Di Carlo, Gabriella; Giuliani, Chiara; Ingo, Gabriel M.; Lavorgna, Marino

2016-05-01

Protective coatings based on polymers synthesized from renewable sources (chitosan or an amorphous vinyl alcohol based polymer) have been prepared for the protection of bronze artifacts from corrosion. Besides acting as an effective barrier against corrosive species present in the environment, the efficiency of the coatings has been improved by adding corrosion inhibitor compounds (benzotriazole or mercaptobenzothiazole) to the formulations. The liquid medium of the formulations has been carefully selected looking at maximizing the wettability on the bronze substrate and optimizing the solvent evaporation rate. The minimum amount of inhibitor compounds has been optimized by performing accelerated corrosion tests on coated bronze substrates. The inhibitors have been directly dissolved in the coating-forming solutions and/or introduced by means of nanocarriers, which allow to control the release kinetics. The free dissolved inhibitor molecules immediately provide a sufficient protection against corrosion. On the other hand, the inhibitor molecules contained in the nanocarriers serve as long-term reservoir, which can be activated by external corrosion-related stimuli in case of particularly severe conditions. Particular attention has been paid to other features which affect the coating performances. Specifically, the adhesion of the protective polymer layer to the bronze substrate has been assessed, as well as its permeability properties and transparency, the latter being a fundamental feature of protective coating for cultural heritages. Finally, the protective efficiency of the produced smart coatings has been assessed through accelerated corrosion tests.

The whole world put between to shells: The cosmic symbolism of tortoises and turtles.

NASA Astrophysics Data System (ADS)

Rappengluck, M.

Since the Bronze Age turtles and tortoise were related to a cosmic symbolism by ancient cultures in different parts of the world, with a certain concentration in the northern hemisphere. The paper attempts to categorize aspects of the cosmic turtle symbolism, using mainly an ethnoastronomical approach, partly supported by archaeological evidences. As a result a set of concepts can be identified, which are related to cosmologic, cosmogonic, biological and psychological aspects.

Genetic evidence for an origin of the Armenians from Bronze Age mixing of multiple populations

PubMed Central

Haber, Marc; Mezzavilla, Massimo; Xue, Yali; Comas, David; Gasparini, Paolo; Zalloua, Pierre; Tyler-Smith, Chris

2016-01-01

The Armenians are a culturally isolated population who historically inhabited a region in the Near East bounded by the Mediterranean and Black seas and the Caucasus, but remain under-represented in genetic studies and have a complex history including a major geographic displacement during World War I. Here, we analyse genome-wide variation in 173 Armenians and compare them with 78 other worldwide populations. We find that Armenians form a distinctive cluster linking the Near East, Europe, and the Caucasus. We show that Armenian diversity can be explained by several mixtures of Eurasian populations that occurred between ~3000 and ~2000 bce, a period characterized by major population migrations after the domestication of the horse, appearance of chariots, and the rise of advanced civilizations in the Near East. However, genetic signals of population mixture cease after ~1200 bce when Bronze Age civilizations in the Eastern Mediterranean world suddenly and violently collapsed. Armenians have since remained isolated and genetic structure within the population developed ~500 years ago when Armenia was divided between the Ottomans and the Safavid Empire in Iran. Finally, we show that Armenians have higher genetic affinity to Neolithic Europeans than other present-day Near Easterners, and that 29% of Armenian ancestry may originate from an ancestral population that is best represented by Neolithic Europeans. PMID:26486470

The presence of nuclear families in prehistoric collective burials revisited: the bronze age burial of Montanissell Cave (Spain) in the light of aDNA.

PubMed

Simón, Marc; Jordana, Xavier; Armentano, Nuria; Santos, Cristina; Díaz, Nancy; Solórzano, Eduvigis; López, Joan B; González-Ruiz, Mercedes; Malgosa, Assumpció

2011-11-01

Ancient populations have commonly been thought to have lived in small groups where extreme endogamy was the norm. To contribute to this debate, a genetic analysis has been carried out on a collective burial with eight primary inhumations from Montanissell Cave in the Catalan pre-Pyrenees. Radiocarbon dating clearly placed the burial in the Bronze Age, around 3200 BP. The composition of the group-two adults (one male, one female), one young woman, and five children from both sexes-seemed to represent the structure of a typical nuclear family. The genetic evidence proves this assumption to be wrong. In fact, at least five out of the eight mitochondrial haplotypes were different, denying the possibility of a common maternal ancestor for all of them. Nevertheless, 50% of the inhumations shared haplogroup J, so the possibility of a maternal relationship cannot be ruled out. Actually, combining different analyses performed using ancient and living populations, the probability of having four related J individuals in Montanissell Cave would range from 0.9884 to 0.9999. Owing to the particularities of this singular collective burial (small number of bodies placed altogether in a hidden cave, the evidence of non-simultaneous interments, close dating and unusual grave goods), we suggest that it might represent a small group with a patrilocal mating system. Copyright © 2011 Wiley-Liss, Inc.

The Volga-Don orocline stitching Volgo-Sarmatia

NASA Astrophysics Data System (ADS)

Bogdanova, S. V.; Postnikov, A. V.; Bibikova, E. V.

2012-04-01

The crustal segments of Volgo-Uralia and Sarmatia occupy about half of the territory of the East European Craton. They differ from its Fennoscandian part by featuring large Early Archaean blocks and 2.1-2.0 Ga orogenic belts. The Volga-Don belt, which separates Archaean Volgo-Uralia from likewise Archaean eastern Sarmatia (the Oskol-Azov megablock) is one of the intracratonic collisional orogens that stitched together various Sarmatian terranes and Volgo-Uralia during the assembly of megacontinent Volgo-Sarmatia. The Volga-Don orogen is an orocline, NS-trending in the south, but bending and wedging out in the northwest where Sarmatia and Volgo-Uralia were brought into close contact caused by their oblique collision. It extends for more than 600 km and is very wide in the southeast, embracing several tectonic terranes, bounded by strike slip- and thrust faults. There, the Volga-Don orogen comprises the following terranes from the east to the west: (1) The wide South Volga province made up of metasedimentary migmatites and S-type garnet-bearing granitoids of granulite and amphibolite facies having NdTDM isotopic ages between 2.4 and 2.1 Ga. These overlie the Archaean basement of Volgo-Uralia, (2) The Tersa continental- marginal igneous belt, where granitoid intrusions of shoshonitic affinity were emplaced into South Volga metasedimentary rocks and their basement at 2.04 Ga. Their NdTDM model ages vary between 2.6 and 2.1 Ga, (3) The Balashov block consisting of the East Vorontsovka turbiditic rocks metamorphosed in the greenschist- to amphibolite facies of a LP/HT series, and in places migmatized and intruded by 2.02 Ga S-type granites, (4) the East Voronezh block, where accretionary-type turbidites of the West Vorontsovka Group have been penetrated by a number of small mafic-ultramafic and gabbro-dioritic plus granitic intrusions with ages of 2.08-2.05 and 2.06-2.05 Ga, respectively, (5) the 2.1-2.08 Ga Lipetsk-Losevo volcanic arc extending along the continental margin of the Archaean Oskol-Azov (Kursk) block of Sarmatia, and (6) the Oskol-Azov block with tectonic belts of Palaeoproterozoic intensively deformed BIF (banded iron formation) metasediments. Terranes 4, 5 and 6 characterize the East Sarmatian accretionary orogen (Shchipansky et al., 2007) developed shortly before the Volga-Don collision. The Volgo-Uralian terranes (1-3) appear to represent an array of intracratonic basin, active continental margin and mature island arcs. The internal structure of the Volga-Don orogen is bilateral and symmetric, complicated by strike-slip faulting and normal faults mostly related to the formation of the Mesoproterozoic Pachelma aulacogen. Recent seismic reflection profiling revealed typical collisional interfingering of tectonic layers/nappes belonging to the Sarmatian as well as Volgo-Uralian crust, and a mantle reflector dipping beneath Volgo-Uralia (Gusev et al., 2010). On the whole, the deep crustal geometry suggests that the Sarmatia-Volgo-Uralia intersegment suture is situated in the central part of the orocline along the western fault boundary of the Balashov block. Gusev, G.S., Mezhelovsky, N.V. and Fedorchuk, V.P. (Eds.), 2010. Essays for Regional Geology of Russia, 2. GEOKART, GEOS, Moscow, 400 pp. (in Russian). Shchipansky, A.A., Samsonov, A.V., Petrova, A.Y. and Larionova, Y.O., 2007. Geotectonics (Geotektonika), 41(1): 38-62.

Alternate alloys for UF/sub 6/ cylinder valve packing nuts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blue, S.C.

One-inch cylinder valve packing nuts made from aluminum bronze alloy C63600 are susceptible to stress corrosion cracking. The use of alloys which are more resistant to cracking should eliminate the occasional nut failures. It is proposed that packing nuts be produced from either aluminum bronze C61300 or Monel (NO4400). 2 refs., 4 tabs.

Noncyanide Stripper Placement Program. Phase 1

DTIC Science & Technology

1989-05-01

bronze (brazing material ) from low-alloy steels , heat and corrosion resistant...STRIPPERS AND BASIS MATERIALS FROM WHICH THE COATINGS ARE REMOVED (FROM T.O.42C2-1-7) Surface Coating Basis Material Brass Low-Alloy Steels Bronze Low...braze materials , low alloy steels , and heat and corrosion resistant steels . Additional tests were performed on three masking materials routinely

An ancient Roman bowl embedded in a soil sample: surface shaded three dimensional display using data from a multi-detector CT.

PubMed

De Maeseneer, M; Buls, N; Cleeren, N; Lenchik, L; De Mey, J

2006-01-01

We present an unusual application of multidetector CT and shaded surface rendering in the investigation of a soil sample, containing an ancient Roman bronze bowl. The CT findings were of fundamental importance in helping the archaeologists study the bronze bowl from the soil sample.

Ancient Chinese Bronzes: Teacher's Packet.

ERIC Educational Resources Information Center

Smithsonian Institution, Washington, DC. Arthur M. Sackler Gallery.

The focus of this teacher's packet is the bronze vessels made for the kings and great families of the early Chinese dynasties between 1700 B.C. and 200 A.D. The materials in the guide are intended for use by teachers and students visiting the exhibition, "The Arts of China," at the Arthur M. Sackler Gallery of the Smithsonian Institution…

Cold spraying of aluminum bronze on profiled submillimeter cermet structures formed by laser cladding

NASA Astrophysics Data System (ADS)

Ryashin, N. S.; Malikov, A. G.; Shikalov, V. S.; Gulyaev, I. P.; Kuchumov, B. M.; Klinkov, S. V.; Kosarev, V. F.; Orishich, A. M.

2017-10-01

The paper presents results of the cold spraying of aluminum bronze coatings on substrates profiled with WC/Ni tracks obtained by laser cladding. Reinforcing cermet frames shaped as grids with varied mesh sizes were clad on stainless steel substrates using a CO2 laser machine "Siberia" (ITAM SB RAS, Russia). As a result, surfaces/substrates with heterogeneous shape, composition, and mechanical properties were obtained. Aluminum bronze coatings were deposited from 5lF-NS powder (Oerlikon Metco, Switzerland) on those substrates using cold spraying equipment (ITAM SB RAS). Data of profiling, microstructure diagnostics, EDS analysis, and mechanical tests of obtained composites is reported. Surface relief of the sprayed coatings dependence on substrate structure has been demonstrated.

Pulling out the 1%: Whole-Genome Capture for the Targeted Enrichment of Ancient DNA Sequencing Libraries

PubMed Central

Carpenter, Meredith L.; Buenrostro, Jason D.; Valdiosera, Cristina; Schroeder, Hannes; Allentoft, Morten E.; Sikora, Martin; Rasmussen, Morten; Gravel, Simon; Guillén, Sonia; Nekhrizov, Georgi; Leshtakov, Krasimir; Dimitrova, Diana; Theodossiev, Nikola; Pettener, Davide; Luiselli, Donata; Sandoval, Karla; Moreno-Estrada, Andrés; Li, Yingrui; Wang, Jun; Gilbert, M. Thomas P.; Willerslev, Eske; Greenleaf, William J.; Bustamante, Carlos D.

2013-01-01

Most ancient specimens contain very low levels of endogenous DNA, precluding the shotgun sequencing of many interesting samples because of cost. Ancient DNA (aDNA) libraries often contain <1% endogenous DNA, with the majority of sequencing capacity taken up by environmental DNA. Here we present a capture-based method for enriching the endogenous component of aDNA sequencing libraries. By using biotinylated RNA baits transcribed from genomic DNA libraries, we are able to capture DNA fragments from across the human genome. We demonstrate this method on libraries created from four Iron Age and Bronze Age human teeth from Bulgaria, as well as bone samples from seven Peruvian mummies and a Bronze Age hair sample from Denmark. Prior to capture, shotgun sequencing of these libraries yielded an average of 1.2% of reads mapping to the human genome (including duplicates). After capture, this fraction increased substantially, with up to 59% of reads mapped to human and enrichment ranging from 6- to 159-fold. Furthermore, we maintained coverage of the majority of regions sequenced in the precapture library. Intersection with the 1000 Genomes Project reference panel yielded an average of 50,723 SNPs (range 3,062–147,243) for the postcapture libraries sequenced with 1 million reads, compared with 13,280 SNPs (range 217–73,266) for the precapture libraries, increasing resolution in population genetic analyses. Our whole-genome capture approach makes it less costly to sequence aDNA from specimens containing very low levels of endogenous DNA, enabling the analysis of larger numbers of samples. PMID:24568772

Empire Without A Voice Phoenician Iron Metallurgy and Imperial Strategy at Carthage

NASA Astrophysics Data System (ADS)

Kaufman, Brett Sanford

The role of iron in the emergence of Iron Age states in North Africa and the Near East has been poorly understood due to a paucity of contemporary, diachronic ferrous archaeometallurgical data. Excavations at Phoenician and Punic Carthage in the 2000s recovered one of the largest and most diverse corpora of Iron Age iron production material culture from North Africa and the Near East, spanning the entire history of Carthage from its Tyrian colonial foundations to its destruction by Rome (historical dates 814--146 BC). Analysis of the materials employing metallography, portable X-ray fluorescence spectroscopy (pXRF), and variable pressure scanning electron microscopy coupled with energy x-ray dispersive spectroscopy (VPSEM-EDS) indicates that Carthaginian smiths were smelting and smithing wrought iron and steel as an exchange good or tribute commodity to Tyre and the Assyrian empire, as well as producing, refining, and consuming tin and arsenical bronzes, leaded bronzes, lead, and cobalt. Archaeological evidence demonstrates a state industry of iron production, including the commissioning, decommissioning, and outsourcing of metallurgical precincts. There is an overwhelming difference exhibited between output capacity at industrial and household production sites. Epigraphic evidence in Punic illustrates the inherent economic and familial affiliations between the Carthaginian state and metalworkers. Ironsmiths, bronze casters, and goldsmiths were privileged engineers of one of the state's most strategic industries, and were stratified in a hierarchy of technical specialties and ranks. In order to conserve fuel and succeed in properly vitrifying ore or bloom impurities into slag, they recycled industrial byproducts in the form of murex shells from purple dye production as a metallurgical flux and lined the furnaces with quartz-rich heat insulation. Carthage was one colony in the Phoenician commodity procurement network, whose task it was to convert iron blooms into final products. By the time this colony became independent of Tyre ca. 650--550 BC, the smiths of Carthage already had around a century of expertise in the production of iron and steel implements which gave the state a competitive advantage in the strategic arena of ferrous technologies and the formation of empire.

Age determination of the world's oldest movable metal types through measuring the "meog" using AMS

NASA Astrophysics Data System (ADS)

Hong, W.; Lee, S. C.; Park, J. H.; Park, G.; Sung, K. H.; Lee, J. G.; Nam, K. H.

2015-10-01

The fabrication year of a set of movable metal types that were thought to be used for printing "Jeungdoga" was investigated. Since the types were made from bronze and did not contain carbon, an organic black ink called "meog" was collected from the type surfaces to quantify their ages. The meog samples were collected from 34 metal types, and 27 ages were obtained. The youngest age was 798 ± 44 yrBP, and the oldest reasonable age was 1166 ± 43 yrBP. The weighted average after eliminating ages with poor statistics was 950 ± 28 yrBP. This age is 300 years older than that of the Jikji (AD 1377), which is a Buddhist document recognized as the world's oldest document printed using metal types, and also older than that of the Gutenberg bible (AD 1450).

Interspecific variation in resistance of Asian, European, and North American birches (Betula spp.) to bronze birch borer (Coleoptera: Buprestidae).

PubMed

Nielsen, David G; Muilenburg, Vanessa L; Herms, Daniel A

2011-06-01

Bronze birch borer (Agrilus anxius Gory) is the key pest of birches (Betula spp.) in North America, several of which have been recommended for ornamental landscapes based on anecdotal reports of borer resistance that had not been confirmed experimentally. In a 20-yr common garden experiment initiated in 1979 in Ohio, North American birch species, including paper birch (Betula papyrifera Marshall), 'Whitespire' gray birch (Betula populifolia Marshall), and river birch (Betula nigra L.), were much more resistant to bronze birch borer than species indigenous to Europe and Asia, including European white birch (Betula pendula Roth), downy birch (Betula pubescens Ehrh.), monarch birch (Betula maximowicziana Regel), and Szechuan white birch (Betula szechuanica Jansson). Within 8 yr of planting, every European white, downy, and Szechuan birch had been colonized and killed, although 100% of monarch birch had been colonized and 88% of these plants were killed after nine years. Conversely, 97% of river birch, 76% of paper birch, and 73% Whitespire gray birch were alive 20 yr after planting, and river birch showed no evidence of colonization. This pattern is consistent with biogeographic theory of plant defense: North American birch species that share a coevolutionary history with bronze birch borer were much more resistant than naïve hosts endemic to Europe and Asia, possibly by virtue of evolution of targeted defenses. This information suggests that if bronze birch borer were introduced to Europe or Asia, it could threaten its hosts there on a continental scale. This study also exposed limitations of anecdotal observation as evidence of host plant resistance.

Trojan War displayed as a full annihilation-diffusion-reaction model

NASA Astrophysics Data System (ADS)

Flores, J. C.

2017-02-01

The diffusive pair annihilation model with embedded topological domains and archaeological data is applied in an analysis of the hypothetical Trojan-Greek war during the late Bronze Age. Estimations of parameter are explicitly made for critical dynamics of the model. In particular, the 8-metre walls of Troy could be viewed as the effective shield that provided the technological difference between the two armies. Suggestively, the numbers in The Iliad are quite sound, being in accord with Lanchester's laws of warfare.

Orientation of Hittite Monuments

NASA Astrophysics Data System (ADS)

González-García, A. César; Belmonte, Juan Antonio

The possible astronomical or topographical orientations of the Hittite monuments of the Bronze Age has remained unexplored until recently. This would provide an important insight into how temporality was imprinted by this culture in sacred spaces and in the landscape. The authors' analysis of a statistically significant sample of Hittite temples - and a few monumental gates - has demonstrated that ancient Hittite monuments were not randomly orientated as previously thought. On the contrary, there were well-defined patterns of orientation that can be interpreted within the context of Hittite culture and religion.

Analyzing Lead Content in Ancient Bronze Coins by Flame Atomic Absorption Spectroscopy: An Archaeometry Laboratory with Nonscience Majors

ERIC Educational Resources Information Center

Donais, Mary Kate; Whissel, Greg; Dumas, Ashley; Golden, Kathleen

2009-01-01

A unique, interdisciplinary collaboration between chemistry and classics has led to the development of an experiment for nonscience majors. This instrumental analysis experiment was designed for use in an archaeology course to quantify the amount of lead in ancient bronze coins. The coins were corroded beyond visual identification, so provenance…

Exposition and Synthesis of Benin Bronze Casting: Emphasis on the Olotan Casters of Benin

ERIC Educational Resources Information Center

Ifeta, Chris Funke

2016-01-01

The introduction of Western education to Nigeria has brought in its wake great strides toward development. Changes in Benin dates far back to the dawn of the 20th century. This paper investigates the critical role of education in development. The paper integrates interview data collected from bronze casters in Benin. The first section of the paper…

Enhancement of bronze alloy surface properties by FSP second-phase particle incorporation

DOE PAGES

Ajayi, O. O.; Lorenzo-Martin, Cinta

2017-06-15

This study presents results of an experimental study to evaluate friction stir processing (FSP) with and without hard second-phase particle incorporation as a means to enhance surface properties and wear performance of C86300 manganese bronze alloy. FSP of flat bronze alloy specimens was conducted with hardened H-13 tool steel to create a 3-mm-thick processed surface layer. The process was also used to incorporate B 4C particles, thereby creating a metal-matrix composite layer on the alloy surface. FSP alone was observed to produce substantial reduction in grain size (from an initial value of 350 mu m to 1-5 μm). FSP withoutmore » particle incorporation resulted in modest surface hardening due to grain refinement and dispersion hardening. Under lubricated contact in block-on-ring testing with a hardened steel counter face, FSP produced substantial reduction (about 3X) in bronze wear after polishing of processing surface roughening. FSP with hard B 4C second-phase particle incorporation further reduced wear by up to 20X. The improvement in wear behavior is attributed to grain refinement and load shielding by second-phase particles, as determined by wear mechanism analysis.« less

X-ray fluorescence spectroscopy and Monte Carlo characterization of a unique nuragic artifact (Sardinia, Italy)

NASA Astrophysics Data System (ADS)

Brunetti, Antonio; Depalmas, Anna; di Gennaro, Francesco; Serges, Alessandra; Schiavon, Nicola

2016-07-01

The chemical composition of a unique bronze artifact known as the "Cesta" ("Basket") belonging to the ancient Nuragic civilization of the Island of Sardinia, Italy has been analyzed by combining X-ray Fluorescence Spectroscopy (XRF) with Monte Carlo simulations using the XRMC code. The "Cesta" had been discovered probably in the XVIII century with the first graphic representation reported around 1761. In a later draft (dated 1764), the basket has been depicted as being carried upside-down on the shoulder of a large bronze warrior Barthélemy (1761), Pinza (1901), Winckelmann (1776) . The two pictorial representations differed only by the presence of handles in the most recent one. XRF measurements revealed that the handles of the object are composed by brass while the other parts are composed by bronze suggesting the handles as being a later addition to the original object. The artifact is covered at its surface by a fairly thick corrosion patina. In order to determine the bronze bulk composition without the need for removing the outer patina, the artifact has been modeled as a two layer object in Monte Carlo simulations.

Electronic band structure and charge density wave transition in quasi-2D KMo6O17 purple bronze

NASA Astrophysics Data System (ADS)

Valbuena, M. A.; Avila, J.; Vyalikh, D. V.; Guyot, H.; Laubschat, C.; Molodtsov, S. L.; Asensio, M. C.

2008-03-01

High resolution angle-resolved photoemission of quasi-2D KMo6O17 purple bronze has been performed in the range from room temperature to 130 K, slightly above the charge density wave (CDW) transition (Tc = 110 K), and down to 35 K (well below Tc). In this paper we report a detailed study of how electronic band structure is affected by this transition driven by the hidden nesting scenario. The expected spectroscopic fingerprints of the CDW phase transition have been found and discussed according to the hidden one dimension and the development of a quasi-commensurate CDW. The excellent agreement between theory and our experimental results makes of potassium purple bronze a reference system for studying this type of instabilities.

Influence of various surface pretreatments on adherence of sputtered molybdenum disulfide to silver, gold, copper, and bronze

NASA Technical Reports Server (NTRS)

Spalvins, T.

1973-01-01

Solid film lubricants of radio frequency sputtered molybdenum disulfide (MoS2) were applied to silver, gold, copper, and bronze surfaces that had various pretreatments (mechanical polishing, sputter etching, oxidation, and sulfurization). Optical and electron transmission micrographs and electron diffraction patterns were used to interpret the film formation characteristics and to evaluate the sputtering conditions in regard to the film and substrate compatibility. Sputtered MoS2 films flaked and peeled on silver, copper, and bronze surfaces except when the surfaces had been specially oxidized. The flaking and peeling was a result of sulfide compound formation and the corresponding grain growth of the sulfide film. Sputtered MoS2 films showed no peeling and flaking on gold surfaces regardless of surface pretreatment.

The role of oxide structure on copper wire to the rubber adhesion

NASA Astrophysics Data System (ADS)

Su, Yea-Yang; Shemenski, Robert M.

2000-07-01

Most metals have an oxide layer on the surface. However, the structure of the oxide varies with the matrix composition, and depends upon the environmental conditions. A bronze coating, nominal composition of 98.5% Cu and balance of Sn, is applied to steel wire for reinforcing pneumatic tire beads and to provide adhesion to rubber. This work studied the influence of copper oxides on the bronze coating on adhesion during vulcanization. To emphasize the oxide structures, electrolytic tough pitch (ETP) copper wire was used instead of the traditional bronze-coated tire bead wire. Experimental results confirmed the hypothesis that cuprous oxide (Cu 2O) could significantly improve bonding between copper wire and rubber, and demonstrated that the interaction between rubber and oxide layer on wire is an electrochemical reaction.

Atmospheric metal pollution records in the Kovářská Bog (Czech Republic) as an indicator of anthropogenic activities over the last three millennia.

PubMed

Bohdálková, Leona; Bohdálek, Petr; Břízová, Eva; Pacherová, Petra; Kuběna, Aleš Antonín

2018-08-15

Three peat cores were extracted from the Kovářská Bog in the central Ore Mountains to study anthropogenic pollution generated by mining and metallurgy. The core profiles were 14 C dated, and concentrations of selected elements were determined by ICP MS and HG-AAS. Principal component analysis indicated that Pb, Cu, As and Ag may be useful elements for the reconstruction of historical atmospheric pollution. Total and anthropogenic accumulation rates (ARs) of Pb, Cu and As estimated for the last ca. 3500years showed similar chronologies, and revealed twelve periods of elevated ARs of Pb, As and Cu related to possible mining and metallurgic activities. In total, four periods of elevated ARs of Pb, Cu and As were detected during the Middle and Late Bronze Ages, including a distinct Late Bronze Age pollution event between 1030BCE and 910BCE. The Iron Age included three episodes of increased ARs of Pb and As; the first and the most distinctive episode, recorded between 730 and 440BCE, was simultaneous with the Bylany culture during the Hallstatt Period. The Roman Age was characterized by one pollution event, two events were detected in the Middle Ages, and the last two during the modern period. Enhanced element ARs in the late 12th and 15th centuries clearly documented the onset of two periods of intense mining in the Ore Mountains. Metal ARs culminated in ca. 1600CE, and subsequently decreased after the beginning of the Thirty Years' War. The last boom of mining between 1700CE and 1830CE represented the last period of important metallurgical operations. Late Medieval and modern period metal ARs are in good agreement with written documents. Earlier pollution peaks suggest that local metal production could have a much longer tradition than commonly believed; however, archaeological or written evidence is scarce or lacking. Copyright © 2018 Elsevier B.V. All rights reserved.

Weaning practices among pastoralists: New evidence of infant feeding patterns from Bronze Age Eurasia.

PubMed

Ventresca Miller, Alicia; Hanks, Bryan K; Judd, Margaret; Epimakhov, Andrey; Razhev, Dmitry

2017-03-01

This paper investigates infant feeding practices through stable carbon (δ 13 C) and nitrogen (δ 15 N) isotopic analyses of human bone collagen from Kamennyi Ambar 5, a Middle Bronze Age cemetery located in central Eurasia. The results presented are unique for the time period and region, as few cemeteries have been excavated to reveal a demographic cross-section of the population. Studies of weaning among pastoral societies are infrequent and this research adds to our knowledge of the timing, potential supplementary foods, and cessation of breastfeeding practices. Samples were collected from 41 subadults (<15 years) and 27 adults (15+ years). Isotopic reference sets from adult humans as well as faunal remains were utilized as these form the primary and complementary foods fed to infants. Slight shifts in δ 13 C and δ 15 N values revealed that weaning was a multi-stage process (breastfeeding, weaning, and complete cessation of nursing) that began at 6 months of age, occurred over several years of early childhood, and was completed by 4 years of age. Our results indicate that weaning was a multi-stage process that was unique among late prehistoric pastoralist groups in Eurasia that were dependent on milk products as a supplementary food. Our discussion centers on supporting this hypothesis with modern information on central and east Eurasian herding societies including the age at which complementary foods are introduced, the types of complementary foods, and the timing of the cessation of breastfeeding. Integral to this work is the nature of pastoral economies and their dependence on animal products, the impact of complementary foods on nutrition and health, and how milk processing may have affected nutrition content and digestibility of foods. This research on Eurasian pastoralists provides insights into the complexities of weaning among prehistoric pastoral societies as well as the potential for different complementary foods to be incorporated into infant diets in the past. © 2016 Wiley Periodicals, Inc.

7 CFR 906.365 - Texas Orange and Grapefruit Regulation 34.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Bright, U.S. No. 1 Bronze, U.S. Combination (with not less than 60 percent, by count, of the oranges in....S. No. 1 Bright, or U.S. No. 1 Bronze, or meet the quality requirements of “Texas Fancy” or “Texas... within 48 hours prior to the time of shipment. No handler may transport by motor vehicle or cause the...

Fuel cell oxygen electrode

DOEpatents

Shanks, H.R.; Bevolo, A.J.; Danielson, G.C.; Weber, M.F.

An oxygen electrode for a fuel cell utilizing an acid electrolyte has a substrate of an alkali metal tungsten bronze of the formula: A/sub x/WO/sub 3/ where A is an alkali metal and x is at least 0.2, which is covered with a thin layer of platinum tungsten bronze of the formula: Pt/sub y/WO/sub 3/ where y is at least 0.8.

Fuel cell oxygen electrode

DOEpatents

Shanks, Howard R.; Bevolo, Albert J.; Danielson, Gordon C.; Weber, Michael F.

1980-11-04

An oxygen electrode for a fuel cell utilizing an acid electrolyte has a substrate of an alkali metal tungsten bronze of the formula: A.sub.x WO.sub.3 where A is an alkali metal and x is at least 0.2, which is covered with a thin layer of platinum tungsten bronze of the formula: Pt.sub.y WO.sub.3 where y is at least 0.8.

Ancient hepatitis B viruses from the Bronze Age to the Medieval period.

PubMed

Mühlemann, Barbara; Jones, Terry C; Damgaard, Peter de Barros; Allentoft, Morten E; Shevnina, Irina; Logvin, Andrey; Usmanova, Emma; Panyushkina, Irina P; Boldgiv, Bazartseren; Bazartseren, Tsevel; Tashbaeva, Kadicha; Merz, Victor; Lau, Nina; Smrčka, Václav; Voyakin, Dmitry; Kitov, Egor; Epimakhov, Andrey; Pokutta, Dalia; Vicze, Magdolna; Price, T Douglas; Moiseyev, Vyacheslav; Hansen, Anders J; Orlando, Ludovic; Rasmussen, Simon; Sikora, Martin; Vinner, Lasse; Osterhaus, Albert D M E; Smith, Derek J; Glebe, Dieter; Fouchier, Ron A M; Drosten, Christian; Sjögren, Karl-Göran; Kristiansen, Kristian; Willerslev, Eske

2018-05-09

Hepatitis B virus (HBV) is a major cause of human hepatitis. There is considerable uncertainty about the timescale of its evolution and its association with humans. Here we present 12 full or partial ancient HBV genomes that are between approximately 0.8 and 4.5 thousand years old. The ancient sequences group either within or in a sister relationship with extant human or other ape HBV clades. Generally, the genome properties follow those of modern HBV. The root of the HBV tree is projected to between 8.6 and 20.9 thousand years ago, and we estimate a substitution rate of 8.04 × 10 -6 -1.51 × 10 -5 nucleotide substitutions per site per year. In several cases, the geographical locations of the ancient genotypes do not match present-day distributions. Genotypes that today are typical of Africa and Asia, and a subgenotype from India, are shown to have an early Eurasian presence. The geographical and temporal patterns that we observe in ancient and modern HBV genotypes are compatible with well-documented human migrations during the Bronze and Iron Ages 1,2 . We provide evidence for the creation of HBV genotype A via recombination, and for a long-term association of modern HBV genotypes with humans, including the discovery of a human genotype that is now extinct. These data expose a complexity of HBV evolution that is not evident when considering modern sequences alone.

Digital Workflows for a 3d Semantic Representation of AN Ancient Mining Landscape

NASA Astrophysics Data System (ADS)

Hiebel, G.; Hanke, K.

2017-08-01

The ancient mining landscape of Schwaz/Brixlegg in the Tyrol, Austria witnessed mining from prehistoric times to modern times creating a first order cultural landscape when it comes to one of the most important inventions in human history: the production of metal. In 1991 a part of this landscape was lost due to an enormous landslide that reshaped part of the mountain. With our work we want to propose a digital workflow to create a 3D semantic representation of this ancient mining landscape with its mining structures to preserve it for posterity. First, we define a conceptual model to integrate the data. It is based on the CIDOC CRM ontology and CRMgeo for geometric data. To transform our information sources to a formal representation of the classes and properties of the ontology we applied semantic web technologies and created a knowledge graph in RDF (Resource Description Framework). Through the CRMgeo extension coordinate information of mining features can be integrated into the RDF graph and thus related to the detailed digital elevation model that may be visualized together with the mining structures using Geoinformation systems or 3D visualization tools. The RDF network of the triple store can be queried using the SPARQL query language. We created a snapshot of mining, settlement and burial sites in the Bronze Age. The results of the query were loaded into a Geoinformation system and a visualization of known bronze age sites related to mining, settlement and burial activities was created.

Linked Climatic, Environmental, and Societal Changes in the Lower Yellow River Area during the Neolithic-Bronze Age Transition

NASA Astrophysics Data System (ADS)

Yu, S. Y.

2017-12-01

Understanding human-environment interactions during times of large and rapid climatic changes in the second half of the Holocene may deepen our insight into human adaptation and resilience against potential climate anomalies in the future. However, the drivers and societal responses tend to be different from area to area, and the degree and nature of this link are still a matter of debate. Flooding sediments preserved within the cultural stratigraphical context at archaeological sites in the lower Yellow River area may offer an ideal framework for evaluating the association between evolution of Neolithic cultures and climate fluctuations. Here, we present evidence from a mound site for the prevalence of extreme overbank floods during the Neolithic-Bronze Age transition most likely triggered by excessive summer precipitation in the Yellow River valley when prolonged weak El Niño condition prevailed. Repeated flooding during around 4000-3500 cal yr BP substantially modified the floodplain landscape, thereby driving people to disperse to areas dominated by the Erlitou culture and eventually giving rise to a state-level society in central China historiographically identified as the Xia Dynasty. Changes in the drainage network due to repeated flooding also exerted a profound impact on the rice farming-based communities centered in the region of the floods. Our results provide a precise past analogue of the linked climatic, environmental, and societal changes at a time when human societies were evolving into a hierarchy similar to those of today.

Antibacterial drugs as corrosion inhibitors for bronze surfaces in acidic solutions

NASA Astrophysics Data System (ADS)

Rotaru, Ileana; Varvara, Simona; Gaina, Luiza; Muresan, Liana Maria

2014-12-01

The present study is aiming to investigate the effect of four antibiotics (amoxicillin, ciprofloxacin, doxycycline and streptomycin,) belonging to different classes of antibacterial drugs on bronze corrosion in a solution simulating an acid rain (pH 4). Due to their ability to form protective films on the metal surface, the tested antibiotics act as corrosion inhibitors for bronze. The antibiotics were tested at various concentrations in order to determine the optimal concentration range for the best corrosion inhibiting effect. In evaluating the inhibition efficiency, polarization curves, electrochemical impedance spectroscopy, SEM and XPS measurements were used. Moreover, a correlation between the inhibition efficiency of some antibacterial drugs and certain molecular parameters was determined by quantum chemical computations. Parameters like energies EHOMO and ELUMO and HOMO-LUMO energy gap were used for correlation with the corrosion data.

A-15 Superconducting composite wires and a method for making

DOEpatents

Suenaga, Masaki; Klamut, Carl J.; Luhman, Thomas S.

1984-01-01

A method for fabricating superconducting wires wherein a billet of copper containing filaments of niobium or vanadium is rolled to form a strip which is wrapped about a tin-alloy core to form a composite. The alloy is a tin-copper alloy for niobium filaments and a gallium-copper alloy for vanadium filaments. The composite is then drawn down to a desired wire size and heat treated. During the heat treatment process, the tin in the bronze reacts with the niobium to form the superconductor niobium tin. In the case where vanadium is used, the gallium in the gallium bronze reacts with the vanadium to form the superconductor vanadium gallium. This new process eliminates the costly annealing steps, external tin plating and drilling of bronze ingots required in a number of prior art processes.

Wrapping process for fabrication of A-15 superconducting composite wires

DOEpatents

Suenaga, M.; Klamut, C.J.; Luhman, T.S.

1980-08-15

A method for fabricating superconducting wires wherein a billet of copper containing filaments of niobium or vanadium is rolled to form a strip which is wrapped about a tin-alloy core to form a composite. The alloy is a tin-copper alloy for niobium filaments and a gallium-copper alloy for vanadium filaments. The composite is then drawn down to a desired wire size and heat treated. During the heat treatment process, the tin in the bronze reacts with the niobium to form the superconductor niobium tin. In the case where vanadium is used, the gallium in the gallium bronze reacts with the vanadium to form the superconductor vanadium gallium. This new process eliminates the costly annealing steps, external tin plating and drilling of bronze ingots required in a number of prior art processes.

Effect of protective release coatings on the basis of superdispersersed zirconium oxide powder on the formation of gas defects in bronze casting

NASA Astrophysics Data System (ADS)

Martyushev, Nikita V.; Risto, Nikolay A.

2014-10-01

This paper investigates the use of nanopowders in the composition of foundry coatings when casting leaded tin bronzes. Influence of the composition of the applied protective coating on surface finish is studied. The effects of the coatings of the following compositions are compared: non-stick coating (a mixture of low-dispersed chromium oxide powder and heat-treated vegetable oil); non-stick lubricant ASPF-2/RgU on the basis of low- dispersed graphite powder and heat-treated vegetable oil; patent #2297300 (a mixture of superdispersed zirconium dioxide powder with industrial oil). It is demonstrated that application of foundry coatings containing superdispersed metal oxide powders with low thermal conductivity makes it possible to significantly reduce irregularities and eliminate gas porosity on the surface of tin-leaded bronze castings.

Performance of 40-millimeter-bore ball bearings with lead- and lead-alloy-plated retainers in liquid hydrogen at 1.2 million DN

NASA Technical Reports Server (NTRS)

Brewe, D. E.; Wisander, D. W.; Scribbe, H. W.

1972-01-01

Forty-millimeter-bore ball bearings with lead- and lead-alloy-coated retainers were operated in liquid hydrogen at 30,000 rpm under a thrust load of 1780 N (400 lb.) Four different substrate materials were used for the retainer. Longer bearing run times were achieved with a lead-tin-copper alloy coating plated onto a leaded-bronze material (22.5 hr) and an aluminum-bronze alloy (19.3 hr). One bearing with a pure lead coating achieved the desired objective of 10 hr. This bearing had an aluminum - bronze substrate retainer and ran successfully for 12.4 hr. Additions of antimony to the lead provided an alloy coating with better wear resistance than pure lead; however, this coating was abrasive to the outer-race lands.

The Stone Age Plague and Its Persistence in Eurasia.

PubMed

Andrades Valtueña, Aida; Mittnik, Alissa; Key, Felix M; Haak, Wolfgang; Allmäe, Raili; Belinskij, Andrej; Daubaras, Mantas; Feldman, Michal; Jankauskas, Rimantas; Janković, Ivor; Massy, Ken; Novak, Mario; Pfrengle, Saskia; Reinhold, Sabine; Šlaus, Mario; Spyrou, Maria A; Szécsényi-Nagy, Anna; Tõrv, Mari; Hansen, Svend; Bos, Kirsten I; Stockhammer, Philipp W; Herbig, Alexander; Krause, Johannes

2017-12-04

Yersinia pestis, the etiologic agent of plague, is a bacterium associated with wild rodents and their fleas. Historically it was responsible for three pandemics: the Plague of Justinian in the 6 th century AD, which persisted until the 8 th century [1]; the renowned Black Death of the 14 th century [2, 3], with recurrent outbreaks until the 18 th century [4]; and the most recent 19 th century pandemic, in which Y. pestis spread worldwide [5] and became endemic in several regions [6]. The discovery of molecular signatures of Y. pestis in prehistoric Eurasian individuals and two genomes from Southern Siberia suggest that Y. pestis caused some form of disease in humans prior to the first historically documented pandemic [7]. Here, we present six new European Y. pestis genomes spanning the Late Neolithic to the Bronze Age (LNBA; 4,800 to 3,700 calibrated years before present). This time period is characterized by major transformative cultural and social changes that led to cross-European networks of contact and exchange [8, 9]. We show that all known LNBA strains form a single putatively extinct clade in the Y. pestis phylogeny. Interpreting our data within the context of recent ancient human genomic evidence that suggests an increase in human mobility during the LNBA, we propose a possible scenario for the early spread of Y. pestis: the pathogen may have entered Europe from Central Eurasia following an expansion of people from the steppe, persisted within Europe until the mid-Bronze Age, and moved back toward Central Eurasia in parallel with human populations. Copyright © 2017 Elsevier Ltd. All rights reserved.

The main principles of formation of structure of cultural-historical landscapes of Central Russia.

NASA Astrophysics Data System (ADS)

Nizovtsev, Vyacheslav; Natalia, Erman

2014-05-01

The forming and development of cultural-historical landscapes (CH) are obligate result of evolution of society and nature, as well as, man and landscapes during their coherent growth. CH landscapes are holistic historic-cultural and nature creations. They reflect the history of land use and spiritual development of ethnic community of concrete territory with determine homogeneous landscape characteristics. The majority of them appertain to the category of relict landscapes, which completed their evolution growth. That means that these are anthropogenic (AL) and cultural (CL) landscapes. They lost anthropogenic management and continue their growth obeying natural logic. These landscapes include elements of morphological structure and natural components, which have been transformed by men, and also artefacts, sociofacts and mental facts. These facts can be considered as peculiar "biographical chronicle" of activity of population in determinate landscape conditions in determinate historical period. These facts are evidences of material and spiritual cultural of society. The first AL begin to arise simultaneously with conversation of appropriating economy into generating economy. There was such conversation in Central Russia (Neolithic revolution) only in Bronze Age. Anthropogenic transformed landscape complexes and even man-made landscape complexes have been formed in Bronze Age. Some of these complexes exist now. Actual anthropogenic and cultural landscapes began to form only in Iron Age while permanent, long existed settlement and agriculture structure has organized. First, These are small settlement anthropogenic landscape complexes (selischa and gorodischa) with applied permanent miniature arable areas. These complexes located on the capes and on the areas between river banks and banks of streams. Second, these are pasture anthropogenic landscape complexes (on the level of podurochische and urochische), located in flood plain and valley-cavin position (pasture plod plain meadow-forest).

Chelyabinsk fireball and Dyatlov pass tragedy

NASA Astrophysics Data System (ADS)

Kochemasov, G. G.

2013-09-01

The Chelyabinsk bolide as well as the Kunashak meteorite in 1949 (Fig. 3, black square) hit ground in ectonically peculiar place in the Ural Mountains. The main explosion was followed by a series of weaker bangs. The long Uralian fold belt (Pz) separates two subsectors (1 & 2, Fig. 1) of the Eurasian sector (1+2) of the Eastern hemisphere sectoral structure (Fig. 1). At the Pamirs-Hindukush massif (the "Pamirs' cross") meet four tectonic sectors of this structure: two opposite differently uplifted (Africa-Mediterranean ++ and Asian +) and separating them two opposite differently subsided (Eurasian - and Indooceanic - -). Tectonic bisectors divide the sectors into two differently tectonically elevated subsectors. The Ural Mountains is one of these bisectors dividing the somewhat risen East-European subsector and the relatively fallen West-Siberian one. Even more important is the sharp tectonic boundary between subsided Eurasian sector and uplifted Asian one (between 2 and 3, Fig. 1). Fig. 3 shows distribution of electrophonic bolides over USSR [1]. Observations numbers are in circles. The total of 343 observations is distributed at relevant districts; accompanied meteorites were found only in 23-24 cases; in the chart are excluded background values of 1-2 observations per district. Two areas are obviously anomalous. These of the Urals, and the Eurasia-Asia sectoral contact (Novosibirsk - Yenisei R. - Tunguska). A location in the long Uralian belt is determined by its intersection with the Timan fold belt coming from the northwest (Fig. 3). The catastrophic Dyatlov pass where nine people mysteriously died at once occurs there (triangle in Fig. 3). Mancy aborigines know this place as deadly where killing white shining spheres appear. Moreover this belt intersection is well known among hunters for UFO as the Permian triangle (Fig. 2). They meet there to observe unusual atmospheric shining and other anomalous phenomena. In the Yenisei-Tunguska-Baikal region lightning balls appear regularly causing broken trees [2]. In conclusion, these two tectonically distinctive regions are famous by anomalously often appearance of bolides part of which is accompanied by meteorite falls. Out of 343 observations meteorites accompanied less than 10 %. Unclear remains a strange attraction of bolides by very pronounced tectonic features.

Native gold from the Inagli Pt-Au placer deposit (the Aldan Shield, Russia): geochemical characteristics and implications for possible bedrock sources

NASA Astrophysics Data System (ADS)

Svetlitskaya, Tatyana V.; Nevolko, Peter A.; Kolpakov, Vladislav V.; Tolstykh, Nadezhda D.

2018-03-01

The Inagli alluvial Pt-Au placer deposit in the Republic of Sakha (Yakutia), Russia, is linked to the Inagli massif, one of the several Uralian-Alaskan-type alkaline-ultrabasic complexes in the Aldan Shield. Gold from the placer is heterogeneous in composition and is represented by three types. Type 1 gold is the most abundant and is characterized by simple Au-Ag alloys with 4-34 wt% Ag, low Cu (up to 0.08 wt%) and negligible Hg, Pt, and Pd contents, and silver-tellurium sulfosalts (Ag-Cu-Te-S-As compounds) in the inclusion suite. Silicate inclusions are biotite, K-feldspar, Fe-Mg amphibole, chlorite, plagioclase, Fe-Mg pyroxene, zircon, and titanite. Distinctive features of this gold type are most similar to those derived from low-sulfidation systems linked to iron oxide copper-gold or iron skarn types of mineralization. The bedrock source of type 1 gold could be related with monzonite to syenite intrusions surrounding the Inagli massif. Distinctive features of type 2 gold include a wide discontinuous range of Ag content (1-18 wt%), elevated Cu (up to 0.5 wt%), and occasional Pd (up to 0.3 wt%) levels, non-detectable Pt and Hg contents, and rare inclusions of simple sulfides (digenite, pyrrhotite) and Na amphibole. Type 3 gold is distinguished by a narrow range in Ag content (5-8 wt%), elevated Hg (0.5-1 wt%) contents, negligible Cu, Pt and Pd levels, and Au-Pb compounds + K-feldspar inclusions. Microchemical characteristics of type 2 and type 3 gold are interpreted as suggestive of an alkaline-magmatic-related fluid. Based on the grain morphology and microchemical signatures, potential bedrock sources for both gold types could be related to the numerous alkaline veins and potassic alteration zones within the dunite core. A comparison of the Inagli and the Kondyor placer gold allows to generate distinctive generic signatures for gold from Uralian-Alaskan-type alkaline-ultrabasic complexes in the Aldan Shield.

Survey of Nickel-Aluminium-Bronze Casting Alloys on Marine Applications,

DTIC Science & Technology

1981-04-01

and corrosion performance of nickel-aluminium bronze (NAB)/covered by naval specification DGS-8520 and DGS-348 have been investigated. No evidence was...found to suggest that there would be any significant difference in corrosion performance between alloys meeting the two specifications. Early... corrosion problems associated with the weld repair areas of castings have been overcome largely by using improved foundry and welding techniques followed by a

Relative sea-level change in the central Cyclades (Greece) since the Early Bronze Age

NASA Astrophysics Data System (ADS)

Draganits, E.

2012-04-01

The Aegean is a focus of important cultural achievements in Europe since the Neolithic period. The resulting abundance of archaeological remains, many of them below sea-level represent an advantageous area for the study of local relative sea-level change. We have carried out detailed mapping of Despotiko Island (SW of Antiparos) and its surrounding. Despotiko is situated almost exactly in the center of the Cyclades (as defined nowadays), more so than Delos, and therefore is very well suited for sea-level studies of the Cyclades. This beneficial location, combined with a spacious and protected bay, additionally may explain its former importance as stepping-stone in the Aegean Sea. The island is uninhabited at present, but Early Bronze Age settlement sites and graveyards as well as a large Archaic sanctuary proof its former importance. The sanctuary is situated on a gently northeast dipping slope in the northeast part of Despotiko, in range of sight of the Órmos Despotiko. Since 1997 large parts of this important sanctuary have been excavated during several excavation campaigns. Tectonically, Despotiko, Antiparos and Paros, belong to the Attic-Cycladic Crystalline of the Central Hellenides, a stack of metamorphic tectonic nappes, mainly comprising variable types of gneiss, schist, marble and amphibolite, and tectonic slices of unmetamorphosed sediments on top, separated by low-angle normal faults from the metamorphic units below. Submerged archaeological structures at the sea bottom of the Órmos Despotiko, a Classical marble inscription from the sanctuary and partly submerged agriculture trenches at the east coast Despotiko, indicate that the relative sea-level in this area was some 3 m lower during the Early Bronze Age and still more than 1 m lower during Classical time. These values of relative sea-level rise indicate a subsidence component additional to the global sea-level rise in the investigated time period. Neglecting possible vertical tectonic movements and by means of the present sea floor bathymetric configuration the sea level reconstruction would imply the existence of an isthmus between Despotiko, Kimitiri and Antiparos linking the islands at least until Classical time. The existence of an isthmus would not only have altered the communication paths between the two islands, but Despotiko Bay would also have been even better protected from northwest winds than at present. The sea-level values from Despotiko are compared with other recent sea-level reconstructions on other islands of the Cyclades.

A catastrophic event in Lake Geneva region during the Early Bronze Age?

NASA Astrophysics Data System (ADS)

Kremer, Katrina; Yrro, Blé; Marillier, François; Hilbe, Michael; Corboud, Pierre; Rachoud-Schneider, Anne-Marie; Girardclos, Stéphanie

2013-04-01

Similarly to steep oceanic continental margins, lake slopes can collapse, producing large sublacustrine landslides and tsunamis. Lake sediments are excellent natural archives of such mass movements and their study allows the reconstructions of these prehistoric events, such as the 563 AD large tsunami over Lake Geneva (Kremer et al, 2012). In Lake Geneva, more than 100 km of high-resolution seismic reflection profiles reveal the late Holocene sedimentation history. The seismic record shows a succession of five large lens-shaped seismic units (A to I), characterized by transparent/chaotic seismic facies with irregular lower boundaries, and interpreted as mass-movement deposits. These units are interbedded with parallel, continuous and strong amplitude reflections, interpreted as the 'background' lake sediments. The oldest dated mass movement (Unit D) covers a surface of 22 km2 in the deep basin, near the city of Lausanne. This deposit has an estimated minimum volume of 0.18 km3 and thus was very likely tsunamigenic (Kremer et al, 2012). A 12-m-long sediment core confirms the seismic interpretation of the mass movement unit and shows that the uppermost 3 m of Unit D are characterized by deformed hemipelagic sediments topped by a 5 cm thick turbidite. This deposit can be classified as a slump whose scar can be interpreted in the seismic data and visualized by multibeam bathymetry. This slump of Lausanne was likely triggered by an earthquake but a spontaneous slope collapse cannot be excluded (Girardclos et al, 2007). Radiocarbon dating of plant macro-remains reveals that the unit D happened during Early Bronze Age. Three other mass wasting deposits occurred during the same time period and may have been triggered during the same event, either by a single earthquake or by a tsunami generated by the slump of Lausanne. Although the exact trigger mechanism of the all these mass-wasting deposits remains unknown, a tsunami likely generated by this event may have affected the installation of palafittic villages on the shore of Lake Geneva during the Early Bronze Age. References: Girardclos S., Schmidt O.T., Sturm M., Ariztegui D., Pugin A., Anselmetti F.S., 2007, The 1996 AD delta collapse and large turbidite in Lake Brienz, Marine Geology (241), 137-154. Kremer K., Simpson G., Girardclos S., 2012, Giant Lake Geneva tsunami in 563 AD, Nature Geoscience (5), 756-757. This project is financed by the Swiss National Foundation project nr. 200021-121666/1 and the Fondation Ernest Boninchi.

Corrosion of dental aluminium bronze in neutral saline and saline lactic acid.

PubMed

Tibballs, J E; Erimescu, Raluca

2006-09-01

To compare the corrosion behaviours of two aluminium bronze, dental casting alloys during a standard immersion test and for immersion in neutral saline. Cast specimens of aluminium bronzes with 1.4 wt% Fe (G) and 4 wt% Fe (N) were subject to progressively longer periods (up to in total 7 days) immersed in 0.1 M saline, 0.1 M lactic acid solutions and examined by scanning electron microscopy with EDX analysis. Immersion in 0.1M neutral saline was for 7 days. In the acidic solution, exposed interdendritic volumes in alloy N corroded completely away in 7 days with dissolution of Ni-enriched precipitate species as well as the copper-rich matrix. Alloy G begins to corrode more slowly but by a similar mechanism. The number density of an Fe-enriched species is insufficient to maintain a continuous galvanic potential to the copper matrix, and dissolution becomes imperceptible. In neutral saline solution, galvanic action alone caused pit-etching, without the dissolution of either precipitate species. The upper limit for the total dissolution of metallic ions in the standard immersion test can be set at 200 microg cm(-2). Aluminium bronze dental alloys can be expected to release both copper and nickel ions into an acidic oral environment.

The presence and expression of the HIF-1α in the respiratory intestine of the bronze Corydoras Corydoras aeneus (Callichthyidae Teleostei).

PubMed

Satora, Leszek; Mytych, Jennifer; Bilska-Kos, Anna

2018-05-23

Bronze corydoras (Corydoras aeneus) is a small diurnal activity fish from South America. Under hypoxia conditions, it uses the posterior part of the intestine as an accessory respiratory organ. The present PCR studies demonstrated higher expression of HIF-1α (hypoxia-inducible factor) gene in the respiratory than that in digestive part of bronze corydoras intestine. Further, immunolocalization studies using antibodies specific to HIF-1α and transmission electron microscopy (TEM) revealed the presence of HIF-1α epitopes in the intestine of Corydoras aeneus. In the respiratory intestine, the numerous clusters of gold particles visualizing HIF-1α antibody were observed within fibroblasts, whereas in the digestive tract of this species, single gold grains in the epithelial cells were noted. On the other hand, the presence of HIF-1α and the cytoplasmic domain of the epidermal growth factor receptor (EGFR) in the respiratory intestine of bronze corydoras assumes their interactions in the system where these factors appeared for the first time. The non-obligatory air-breathing fishes using their digestive tract as an accessory respiratory organ during hypoxia conditions are very interesting for the studies of the processes that control HIF-1α expression and squamous cell proliferation.

Abnormal photothermal effect of laser radiation on highly defect oxide bronze nanoparticles under the sub-threshold excitation of absorption

NASA Astrophysics Data System (ADS)

Gulyaev, P.; Kotvanova, M.; Omelchenko, A.

2017-05-01

The mechanism of abnormal photo-thermal effect of laser radiation on nanoparticles of oxide bronzes has been proposed in this paper. The basic features of the observed effect are: a) sub-threshold absorption of laser radiation by the excitation of donor-like levels formed in the energy gap due to superficial defects of the oxide bronze nano-crystals; b) an interband radiationless transition of energy of excitation on deep triplet levels and c) consequent recombination occurring at the plasmon absorption. K or Na atoms thermally intercalated to the octahedral crystal structure of TiO2 in the wave SHS combustion generate acceptor levels in the gap. The prepared oxide bronzes of the non-stoichiometric composition NaxTiO2 and KxTiO2 were examined by high resolution TEM, and then grinded in a planetary mill with powerful dispersion energy density up to 4000 J/g. This made it possible to obtain nanoparticles about 50 nm with high surface defect density (1017-1019 cm-2 at a depth of 10 nm). High photo-thermal effect of laser radiation on the defect nanocrystals observed after its impregnation into cartilaginous tissue exceeds 7 times in comparison with the intact ones.

Effect of microstructure on the breakage of tin bronze machining chips during pulverization via jet milling

NASA Astrophysics Data System (ADS)

Afshari, Elham; Ghambari, Mohammad; Farhangi, Hasan

2016-11-01

In this study, jet milling was used to recycle tin bronze machining chips into powder. The main purpose of this study was to assess the effect of the microstructure of tin bronze machining chips on their breakage behavior. An experimental target jet mill was used to pulverize machining chips of three different tin bronze alloys containing 7wt%, 10wt%, and 12wt% of tin. Optical and electron microscopy, as well as sieve analysis, were used to follow the trend of pulverization. Each alloy exhibited a distinct rate of size reduction, particle size distribution, and fracture surface appearance. The results showed that the degree of pulverization substantially increased with increasing tin content. This behavior was attributed to the higher number of machining cracks as well as the increased volume fraction of brittle δ phase in the alloys with higher tin contents. The δ phase was observed to strongly influence the creation of machining cracks as well as the nucleation and propagation of cracks during jet milling. In addition, a direct relationship was observed between the mean δ-phase spacing and the mean size of the jet-milled product; i.e., a decrease in the δ-phase spacing resulted in smaller particles.

The Ayala Mazar-Xiaohe culture: new archaeological discoveries in the Taklamakan desert, China.

PubMed

Baumer, Christoph

2011-01-01

This article, accompanied by colour photos, records the author's recent archaeological expedition in the Taklamakan Desert. His advance northwards along the now mostly sand-covered beds of the Keriya River proved to be a march backward through time, from the Iron Age city of Jumbulakum to the early Bronze Age necropolis of Ayala Mazar. The artifacts he found are contemporary with, and similar to Chinese discoveries at Xiaohe. This proves that Xiaohe was not an isolated case and provides evidence for a whole culture based on some sort of fertility cult. The remains also suggest that some, at least, of the peoples concerned had Indo-European affiliations.

Low Energy Consumption Hydraulic Techniques

DTIC Science & Technology

1988-08-30

usually at welds . 1-15 SECTION II PHASE I - ADVANCED AIRCRAFT HYDRAULIC SYSTEM SELECTION Phase I included Task 1 selection of the aircraft and definition...face was bronze plated. The bearings were 52100 tool steel and the pistons were M50 tool steel. The shoe faces were 4140 with bronze plate and the back...o Magnet assembly o Coil assembly DDV Force Motor - -- ,..._(First Stage) oeMain Control Valve __(Second Sae Main Control Valve LVDT Figure 282 Direct

Taenia sp. in human burial from Kan River, East Siberia.

PubMed

Slepchenko, Sergey Mikhailovich; Ivanov, Sergey Nikolaevich; Vybornov, Anton Vasilevich; Alekseevich, Tsybankov Alexander; Sergeyevich, Slavinsky Vyacheslav; Lysenko, Danil Nikolaevich; Matveev, Vyacheslav Evgenievich

2017-05-01

We present an arhaeoparasitological analysis of a unique burial from the Neftprovod II burial ground in East Siberia, which dated from the Bronze Age. Analysis of a sediment sample from the sacral region of the pelvis revealed the presence of Taenia sp. eggs. Because uncooked animal tissue is the primary source of Taenia, this indicated that the individual was likely consuming raw or undercooked meat of roe deer, red deer, or elk infected with Taenia. This finding represents the oldest case of a human infected with Taenia sp. from Eastern Siberia and Russia.

Healing and medicine in the Aegean Bronze Age.

PubMed

Arnott, R

1996-05-01

Since the discovery of the Minoan and Mycenaean civilizations of Crete and Greek mainland, a systematic understanding has been gained of their material culture and social structures. Nevertheless, because of the absence of textual and pictorial evidence of medicine of the kind which exists in the contemporary societies of Egypt and the Near East, little work has been produced on the subject of disease and the practice of medicine in the period. However, new pathological evidence throws much light on this hitherto largely unknown aspect of their civilization.

Healing and medicine in the Aegean Bronze Age.

PubMed Central

Arnott, R

1996-01-01

Since the discovery of the Minoan and Mycenaean civilizations of Crete and Greek mainland, a systematic understanding has been gained of their material culture and social structures. Nevertheless, because of the absence of textual and pictorial evidence of medicine of the kind which exists in the contemporary societies of Egypt and the Near East, little work has been produced on the subject of disease and the practice of medicine in the period. However, new pathological evidence throws much light on this hitherto largely unknown aspect of their civilization. Images Figure 1 PMID:8778434

Bronzed cowbird taken in Florida

USGS Publications Warehouse

Matteson, R.E.

1970-01-01

On 8 November 1968 in Gainesville, Florida, I removed a male Bronzed Cowbird (Tangavius a. aeneus) from a blackbird decoy trap containing a large number of Brown-headed Cowbirds (Malothrus ater). Oliver L. Austin, Jr., at the Florida State Museum, verified the species identification by noting the notched inner webs of the outer three primaries, a characteristic of the genus. The subspecific identification was made at the U. S. National Museum where the bird is now specimen number 531666. The subspecies normally ranges from southcentral Texas and the Yucatan Peninsula south through Central America to Panama (Check-list of North American birds, fifth ed., Baltimore, Amer. Ornithol. Union, 1957, p. 542). This Gainesville specimen apparently is the first Bronzed Cow- bird taken in Florida. Alexander Sprunt, Jr., (Florida bird life. In Addendum to Florida bird life, New York, Coward-McCann, 1963, p. 18) lists three photographed sightings at Sarasota, Florida, in April 196

Studies on bronze pre-monetary signs found in Dobroudja using XRF and micro-PIXE

NASA Astrophysics Data System (ADS)

Constantinescu, B.; Cristea-Stan, D.; Talmatchi, G.; Ceccato, D.

2016-03-01

We performed compositional analyses on 180 Scythian-type arrowheads and pre-monetary signs using XRF method and on 60 small fragments of such items (approx. 100 microns diameter), sampling being performed on previously corrosion-cleaned areas on their surface, using micro-PIXE. The items are found in Dobroudja, Istros-Histria region. The most relevant for numismatists result is that for each finding place the same type of alloy was used both for fighting arrowheads and for pre-monetary signs. Our analyses revealed three types of alloys: Cu-Sn-Pb ("normal" bronze), Cu-Sn-Mn-Pb and Cu-Sn-Sb-Pb. The presence of antimony suggests the use of fahlore-type poly-metals deposits, most probably from Caucasus Mountains. The problem of ancient bronze containing manganese is more complicated; an explanation could be the use of manganese oxides as flux necessary to smelt oxidized ores.

Element analysis and calculation of the attenuation coefficients for gold, bronze and water matrixes using MCNP, WinXCom and experimental data

NASA Astrophysics Data System (ADS)

Esfandiari, M.; Shirmardi, S. P.; Medhat, M. E.

2014-06-01

In this study, element analysis and the mass attenuation coefficient for matrixes of gold, bronze and water with various impurities and the concentrations of heavy metals (Cu, Mn, Pb and Zn) are evaluated and calculated by the MCNP simulation code for photons emitted from Barium-133, Americium-241 and sources with energies between 1 and 100 keV. The MCNP data are compared with the experimental data and WinXCom code simulated results by Medhat. The results showed that the obtained results of bronze and gold matrix are in good agreement with the other methods for energies above 40 and 60 keV, respectively. However for water matrixes with various impurities, there is a good agreement between the three methods MCNP, WinXCom and the experimental one in low and high energies.

Visual mimicry of host nestlings by cuckoos

PubMed Central

Langmore, Naomi E.; Stevens, Martin; Maurer, Golo; Heinsohn, Robert; Hall, Michelle L.; Peters, Anne; Kilner, Rebecca M.

2011-01-01

Coevolution between antagonistic species has produced instances of exquisite mimicry. Among brood-parasitic cuckoos, host defences have driven the evolution of mimetic eggs, but the evolutionary arms race was believed to be constrained from progressing to the chick stage, with cuckoo nestlings generally looking unlike host young. However, recent studies on bronze-cuckoos have confounded theoretical expectations by demonstrating cuckoo nestling rejection by hosts. Coevolutionary theory predicts reciprocal selection for visual mimicry of host young by cuckoos, although this has not been demonstrated previously. Here we show that, in the eyes of hosts, nestlings of three bronze-cuckoo species are striking visual mimics of the young of their morphologically diverse hosts, providing the first evidence that coevolution can select for visual mimicry of hosts in cuckoo chicks. Bronze-cuckoos resemble their own hosts more closely than other host species, but the accuracy of mimicry varies according to the diversity of hosts they exploit. PMID:21227972

Magnetization and magnetoresistance of common alloy wires used in cryogenic instrumentation.

PubMed

Abrecht, M; Adare, A; Ekin, J W

2007-04-01

We present magnetization and magnetoresistance data at liquid-helium and liquid-nitrogen temperatures for wire materials commonly used for instrumentation wiring of specimens, sensors, and heaters in cryogenic probes. The magnetic susceptibilities in Systeme International units at 4.2 K were found to be: Manganin 1.25x10(-2), Nichrome 5.6x10(-3), and phosphor bronze -3.3x10(-5), indicating that phosphor bronze is the most suitable for high-field applications. We also show the ferromagnetic hysteresis loop of Constantan wire at liquid-helium temperature. The magnetoresistance of these four wires was relatively small: the changes in resistance at 4 K due to a 10 T transverse magnetic field are -2.56% for Constantan, -2.83% for Manganin, +0.69% for Nichrome, and +4.5% for phosphor bronze, compared to about +188% for a typical copper wire under the same conditions.

XRF and micro-PIXE studies of inhomogeneity of ancient bronze and silver alloys

NASA Astrophysics Data System (ADS)

Vasilescu, A.; Constantinescu, B.; Stan, D.; Talmatchi, G.; Ceccato, D.

2017-09-01

New results regarding alloy composition and microstructure for a series of ancient bronze and silver items by X-ray Fluorescence and micro-Particle Induced X-ray Emission spectrometry were obtained in the framework of an extensive numismatic project (Scythian-type arrowheads, arrowhead-shaped monetary signs and wheel coins produced by Histria, 7th-4th century of BCE, and Dacian Radulesti-Hunedoara-type silver tetradrachms, 2nd-1st century of BCE). In Histria, warfare arrowheads were used for trade with Barbarian neighbors at first, then mechanically modified, next melted and cast as dedicated monetary signs, being, in the end, replaced by wheel coins. Three different types of alloys have been identified, and Cu-Mn and Cu-Pb segregation shown. In a blank for Radulesti-Hunedoara-type coins, Ag-(Cu+Pb) segregation has been demonstrated, suggesting an imperfectly alloyed silver-leaded bronze.

Magnetization and magnetoresistance of common alloy wires used in cryogenic instrumentation

NASA Astrophysics Data System (ADS)

Abrecht, M.; Adare, A.; Ekin, J. W.

2007-04-01

We present magnetization and magnetoresistance data at liquid-helium and liquid-nitrogen temperatures for wire materials commonly used for instrumentation wiring of specimens, sensors, and heaters in cryogenic probes. The magnetic susceptibilities in Systeme International units at 4.2 K were found to be: Manganin 1.25×10-2, Nichrome 5.6×10-3, and phosphor bronze -3.3×10-5, indicating that phosphor bronze is the most suitable for high-field applications. We also show the ferromagnetic hysteresis loop of Constantan wire at liquid-helium temperature. The magnetoresistance of these four wires was relatively small: the changes in resistance at 4 K due to a 10 T transverse magnetic field are -2.56% for Constantan, -2.83% for Manganin, +0.69% for Nichrome, and +4.5% for phosphor bronze, compared to about +188% for a typical copper wire under the same conditions.

A Critical Evaluation of Ground-Penetrating Radar Methodology on the Kalavasos and Maroni Built Environments (KAMBE) Project, Cyprus (Invited)

NASA Astrophysics Data System (ADS)

Leon, J.; Urban, T.; Gerard-Little, P.; Kearns, C.; Manning, S. W.; Fisher, K.; Rogers, M.

2013-12-01

The Kalavasos and Maroni Built Environments (KAMBE) Project is a multi-year investigation of the urban fabric and architectural organization of two Late Bronze Age (c. 1650-1100 BCE) polities on Cyprus. The Late Bronze Age (known also as the Late Cypriot period on Cyprus) is characterized by the emergence of a number of large, urban settlements on the island. The amalgamation of large populations at centralized sites coincides with contemporary social, economic and political changes, including a growing disparity in funerary goods, an increased emphasis on metallurgy (specifically copper mining and smelting for the production of bronze), and the construction of monumental buildings. The initial phase of the project centered on geophysical survey at two archaeological sites in adjacent river valleys in south-central Cyprus: Kalavasos-Ayios Dhimitrios and the Maroni settlement cluster [1]. These sites are thought to be two of the earliest 'urban' settlements on the island and provide a unique opportunity to explore how urban space was instrumental in the development of social and political complexity during this transformative period. The formation of these Late Bronze Age urban landscapes is, we argue, not simply the result of this emerging social complexity, but is instead an key tool in the creation and maintenance of societal boundaries. Indeed, the process of 'place-making'--the dynamic creation of socially meaningful spaces, likely by elites--may well have been one of the most effective arenas that elites used to re-enforce the growing socio-political disparity. The KAMBE Project investigates the layout and organization of these new 'urban' spaces to better understand how built-space impacted social developments. Geophysical survey methods are ideal for large-scale data collection both to identify potential areas for targeted archaeological excavation, and to provide proxy data for architectural plans that allow us to comment on the nature of the urban fabric at these settlements. Having just completed this first phase of the project, we report on the results of large-scale geophysical survey, including the identification of at least two previously unknown building complexes (one at each site). Here we focus particularly on ground-penetrating radar (GPR) data and survey methodology, in an effort to critically examine the range of approaches applied throughout the project (e.g. various antennae frequencies, data-collection densities, soil moisture/seasonality of survey, and post-collection data processing [2]), and to identify the most effective parameters for archaeological geophysical survey in the region. This paper also advocates for the role of geophysical survey within a multi-component archaeological project, not simply as a prospection tool but as an archaeological data collection method in its own right. 1]Fisher, K. D., J. Leon, S. Manning, M. Rogers, and D. Sewell. In Press. 2011-2012. 'The Kalavasos and Maroni Built Environments Project: Introduction and preliminary report on the 2008 and 2010 seasons. Report of the Department of Antiquities, Cyprus. 2] e.g. Rogers, M., J. F. Leon, K. D. Fisher, S. W. Manning and D. Sewell. 2012. 'Comparing similar ground-penetrating radar surveys under different soil moisture conditions at Kalavasos-Ayios Dhimitrios, Cyprus.' Archaeological Prospection 19 (4): 297-305.

Maternal and paternal genetic diversity of ancient sheep in Estonia from the Late Bronze Age to the post-medieval period and comparison with other regions in Eurasia.

PubMed

Rannamäe, E; Lõugas, L; Niemi, M; Kantanen, J; Maldre, L; Kadõrova, N; Saarma, U

2016-04-01

Sheep were among the first domesticated animals to appear in Estonia in the late Neolithic and became one of the most widespread livestock species in the region from the Late Bronze Age onwards. However, the origin and historical expansion of local sheep populations in Estonia remain poorly understood. Here, we analysed fragments of the hypervariable D-loop of mitochondrial DNA (mtDNA; 213 bp) and the Y-chromosome SRY gene (130 bp) extracted from 31 archaeological sheep bones dated from approximately 800 BC to 1700 AD. The ancient DNA data of sheep from Estonia were compared with ancient sheep from Finland as well as a set of contemporary sheep breeds from across Eurasia in order to place them in a wider phylogeographical context. The analysis shows that: (i) 24 successfully amplified and analysed mtDNA sequences of ancient sheep cluster into two haplogroups, A and B, of which B is predominant; (ii) four of the ancient mtDNA haplotypes are novel; (iii) higher mtDNA haplotype diversity occurred during the Middle Ages as compared to other periods, a fact concordant with the historical context of expanding international trade during the Middle Ages; (iv) the proportion of rarer haplotypes declined during the expansion of sheep from the Near Eastern domestication centre to the northern European region; (v) three male samples showed the presence of the characteristic northern European haplotype, SNP G-oY1 of the Y-chromosome, and represent the earliest occurrence of this haplotype. Our results provide the first insight into the genetic diversity and phylogeographical background of ancient sheep in Estonia and provide basis for further studies on the temporal fluctuations of ancient sheep populations. © 2016 Stichting International Foundation for Animal Genetics.

Spatial and temporal variations in prehistoric human settlement and their influencing factors on the south bank of the Xar Moron River, Northeastern China

NASA Astrophysics Data System (ADS)

Jia, Xin; Yi, Shuangwen; Sun, Yonggang; Wu, Shuangye; Lee, Harry F.; Wang, Lin; Lu, Huayu

2017-03-01

The West Liao River Basin is the hub of ancient civilizations as well as the birthplace of rain-fed agriculture in Northern China. In the present study, based on 276 archaeological sites on the south bank of the Xar Moron River, Northeastern China, we trace the changes in prehistoric cultures as well as the shifts in the spatial and temporal patterns of human settlement in the West Liao River Basin. Location information for those sites was obtained from fieldwork. Factors such as climate change, landform evolution of the Horqin Dunefield, and subsistence strategies practiced at the sites were extracted via the meta-analysis of published literature. Our results show that the Holocene Optimum promoted the emergence of Neolithic Culture on the south bank of the Xar Moron River. Monsoon failure might have caused the periodic collapse or transformation of prehistoric cultures at (6.5, 4.7, 3.9, and 3.0) kyr B.P., leaving spaces for new cultural types to develop after these gaps. The rise and fall of different cultures was also determined by subsistence strategies. The Xiaoheyan Culture, with mixed modes of subsistence, weakened after 4.7 kyr B.P., whereas the Upper Xiajiadian Culture, supported by sheep breeding, expanded after 3.0 kyr B.P. Global positioning system data obtained from the archaeological sites reveal that cultures with different subsistence strategies occupied distinct geographic regions. Humans who subsisted on hunting and gathering resided at higher altitudes during the Paleolithic Age (1074 m a.s.l.). Mixed subsistence strategies led humans to settle down at 600-1000 m a.s.l. in the Neolithic Age. Agricultural activities caused humans to migrate to 400-800 m a.s.l. in the early Bronze Age, whereas livestock production shifted human activities to 800-1200 m a.s.l. in the late Bronze Age.

Vegetation and soil dynamics under climatic to anthropogenic forcing through the Holocene in Eastern France

NASA Astrophysics Data System (ADS)

Doyen, Elise; Vannière, Boris; Gauthier, Emilie; Bichet, Vincent; Berger, Jean-François; Arnaud, Fabien

2010-05-01

Small lakes with little catchment areas, and high resolution Holocene sediment infilling, offer the interest to record mainly local perturbation and to study the switch from climatic to anthropogenic forcing. Two cores were extracted from Lake Antre in the Jura Mountains (Eastern France, 798 m a.s.l) and Lake Moras located on a low-elevated plateau from the upper Rhone valley (Eastern France, 304 m a.s.l). Cores taken from the deep zone of the lakes present continuous sedimentary series from the Late-glacial (15 000 cal. BP) for Lake Moras and from the Atlantic chronozone (6000 cal. BP) for Lake Antre. Several archaeological excavations and investigations around Lakes Antre and Moras give evidence of major human occupation during Gallo-roman period, while former settlements are indicating by Pre- and Protohistoric archaeological artifacts. Multi-proxy reconstructions with high temporal resolution were undertaken: vegetation dynamics by pollen analysis, fire history by the quantification of microscopic charcoal and soil erosion by magnetic susceptibility measurements. Before the anthropogenic forcing, during the mid-Holocene environment of both lakes are constituted mainly by a dense mixed oak forest. The first palaeoecological signs of anthropogenic impact on the two sites appear to have been discontinuous and limited. They appear at the early Neolithic (ca 6000 cal .BP) for Lake Moras and during the Bronze Age (4000 to 3000 cal .BP) for Lake Antre. For the both sites, all the proxies indicate an acceleration of human impact around 3000 to 2700 cal. BP i.e. at the transition between the Bronze Age and the beginning of the Iron Age. The dense forest and the Alnus dominated vegetation on borders of lakes are affected by several clearances. The influx of micro-charcoal increases due to the use of the fire for clearing and manage settlements. The development of Poaceae and Anthropogenic Pollen Indicators (API) suggest an expansion of pastures, whereas the farming practices remained low as shown by rare Cerealia-type pollen. This resulted in increasing soil erosion. Afterward, the Gallo-roman settlement is in the continuity of the Iron Age occupation. The intensification of the land use is marked by an increase in Poaceae and API as well as in detritic influx, but percentages values of Cerealia-type stay low. The landscape appears to be not dedicated to cultivation activities. At the end of the Gallo-roman period (ca 1700 cal. BP), the anthropogenic indicators decrease and the landscape is reforested (expansion of Carpinus and Alnus on lake shores). At the beginning of Middles Ages (ca 1450 cal. BP), anthropogenic impact reinforced around these two lakes. An intensive farming activity developed particularly around Lake Moras with crops (Cerealia type and Secale type), walnut (Juglans) and hemp (Cannabis-type). From medieval times to the 18th century, human activities appear to be relatively stable. Then hemp, walnut, rye and crops farming, decrease due to grassland expansion until nowadays. To conclude, the present-day landscape seems to directly result from several millennia of human exploitation since the Bronze Age. Vegetation dynamics appears to have been forced by successive activities in these areas.

Archaic artifacts resembling celestial spheres

NASA Astrophysics Data System (ADS)

Dimitrakoudis, S.; Papaspyrou, P.; Petoussis, V.; Moussas, X.

We present several bronze artifacts from the Archaic Age in Greece (750-480 BC) that resemble celestial spheres or forms of other astronomical significance. They are studied in the context of the Dark Age transition from Mycenaean Age astronomical themes to the philosophical and practical revival of astronomy in the Classical Age with its plethora of astronomical devices. These artifacts, mostly votive in nature are spherical in shape and appear in a variety of forms their most striking characteristic being the depiction of meridians and/or an equator. Most of those artifacts come from Thessaly, and more specifically from the temple of Itonia Athena at Philia, a religious center of pan-Hellenic significance. Celestial spheres, similar in form to the small artifacts presented in this study, could be used to measure latitudes, or estimate the time at a known place, and were thus very useful in navigation.

Army Communicator. Volume 27, Number 3, Fall 2002

DTIC Science & Technology

2002-01-01

The BOM is presented to individuals who stand above their peers in their contributions to the Signal Regiment and SCRA. A minimum one-year membership...www.gordon.army.mil/ocos/rdiv/. Army Communicator 39 AR – Army regulation BOM – Bronze Order of Mercury BW – Bronze Wahatchee CONUS – continental United States CS...service. Medical technicians checked Dudley’s vital signs but couldn’t determine his status, so they recommended he go to the hospital for a more

How Can We Best Achieve Contracting Unity of Effort in the CENTCOM Area of Responsibility?

DTIC Science & Technology

2013-11-20

Major Torres’ military decorations include the Bronze Star Medal, the Army Meritorious Medal with oak leaf (OLC), the Army Commendation Medal...1990–May 1991). Major Ross’ military decorations include the Bronze Star Medal, the Army Meritorious Medal with two oak leaf (OLC), the Army...Berteau, D. J., Maddox, D. M., Oliver , D. R., Jr., Salomon, L. E., & Singley, G. T., III. (2007). Urgent reform required: Army expeditionary contracting

Tamil Chola Bronzes and Swamimalai Legacy: Metal Sources and Archaeotechnology

NASA Astrophysics Data System (ADS)

Srinivasan, Sharada

2016-08-01

This review explores the great copper alloy image casting traditions of southern India from archaeometallurgical and ethnometallurgical perspectives. The usefulness of lead isotope ratio and compositional analysis in the finger-printing and art historical study of more than 130 early historic, Pallava, Chola, later Chola, and Vijayanagara sculptures (fifth-eighteenth centuries) is highlighted, including Nataraja, Buddha, Parvati, and Rama images made of copper, leaded bronze, brass, and gilt copper. Image casting traditions at Swamimalai in Tamil Nadu are compared with artistic treatises and with the technical examination of medieval bronzes, throwing light on continuities and changes in foundry practices. Western Indian sources could be pinpointed for a couple of medieval images from lead isotope analysis. Slag and archaeometallurgical investigations suggest the exploitation of some copper and lead-silver sources in the Andhra and Karnataka regions in the early historic Satavahana period and point to probable copper sources for the medieval images in Karnataka, Tamil Nadu, and Andhra Pradesh. The general lower iron content in southern Indian bronzes perhaps renders the proximal copper-magnetite reserves of Seruvila in Sri Lanka as a less likely source. Given the lack of lead deposits in Sri Lanka, however, the match of the lead isotope signatures of a well-known Ceylonese Buddhist Tara in British Museum with a Buddha image from Nagapattinam in Tamil Nadu may underscore ties between the island nation and the southern Indian Tamil regions.

Density-functional studies of tungsten trioxide, tungsten bronzes, and related systems

NASA Astrophysics Data System (ADS)

Ingham, B.; Hendy, S. C.; Chong, S. V.; Tallon, J. L.

2005-08-01

Tungsten trioxide adopts a variety of structures which can be intercalated with charged species to alter the electronic properties, thus forming “tungsten bronzes.” Similar effects are observed upon removing oxygen from WO3 . We present a computational study of cubic and hexagonal alkali bronzes and examine the effects on cell size and band structure as the size of the intercalated ion is increased. With the exception of hydrogen (which is predicted to be unstable as an intercalate), the behavior of the bronzes are relatively consistent. NaWO3 is the most stable of the cubic systems, although in the hexagonal system the larger ions are more stable. The band structures are identical, with the intercalated atom donating its single electron to the tungsten 5d valence band. A study of fractional doping in the NaxWO3 system (0⩽x⩽1) showed a linear variation in cell parameter and a systematic shift in the Fermi level into the conduction band. In the oxygen-deficient WO3-x system the Fermi level undergoes a sudden jump into the conduction band at around x=0.2 . Lastly, three compounds of a layered WO4•α,ω -diaminoalkane hybrid series were studied and found to be insulating, with features in the band structure similar to those of the parent WO3 compound that relate well to experimental UV-visible spectroscopy results.

Alternative Gas Mixtures in Arc Spraying: A Chance to Improve Coating Properties and Residual Stress States

NASA Astrophysics Data System (ADS)

Hauer, Michél; Henkel, Knuth Michael; Krebs, Sebastian; Kroemmer, Werner

2018-01-01

The highly cavitation erosion-resistant propeller alloys CuAl9Ni5Fe4Mn (Ni-Al-Bronze) and CuMn13Al8Fe3Ni2 (Mn-Al-Bronze) were arc-sprayed using a mixture of nitrogen and 2% of hydrogen as atomizing gas and different traverse speeds. The objective was to identify the influences of the different spraying conditions, such as temperature regime and melting loss, on the resulting residual stress states and coating properties. Residual stresses were measured by the incremental hole-drilling method using ESPI. Temperature measurements were carried out by thermographic imaging. Microstructural, chemical and mechanical analyses were realized to examine adhesive and cohesive properties. Additionally, the cavitation erosion behavior was investigated to analyze cohesive coating properties. The spraying process itself was improved, which was apparent by mainly enhanced deposition efficiency and reduced surface temperatures. The amount of oxides and pores as well as the melting loss of alloying elements were reduced. Moreover, an increased cavitation erosion resistance and thus coating cohesion as well as less residual stresses were identified. The change in atomizing gas diminished the impact of the quenching stresses on the coating properties. In contrast, the adhesive strength, Young's moduli and partially the hardness were slightly reduced. With regard to materials, Ni-Al-Bronze revealed superior coating properties in comparison with Mn-Al-Bronze.

Research and application of surface heat treatment for multipulse laser ablation of materials

NASA Astrophysics Data System (ADS)

Cai, Song; Chen, Genyu; Zhou, Cong

2015-11-01

This study analysed a laser ablation platform and built heat transfer equations for multipulse laser ablation of materials. The equations include three parts: laser emission after the material melt and gasification; end of laser emission after the material melts and there is the presence of a super-hot layer and solid-phase heat transfer changes during material ablation. For each of the three parts, the effects of evaporation, plasma shielding and energy accumulation under the pulse interval were considered. The equations are reasonable, and all the required parameters are only related to the laser parameters and material properties, allowing the model to have a certain versatility and practicability. The model was applied for numerical simulation of the heat transfer characteristics in the multipulse laser ablation of bronze and diamond. Next, experiments were conducted to analyse the topography of a bronze-bonded diamond grinding wheel after multipulse laser ablation. The theoretical analysis and experimental results showed that multipulse laser can merge the truing and dressing on a bronze-bonded diamond grinding wheel. This study provides theoretical guidance for optimising the process parameters in the laser ablation of a bronze-bonded diamond grinding wheel. A comparative analysis showed that the numerical solution to the model is in good agreement with the experimental data, thus verifying the correctness and feasibility of the heat transfer model.

Population continuity, demic diffusion and Neolithic origins in central-southern Germany: the evidence from body proportions.

PubMed

Gallagher, A; Gunther, M M; Bruchhaus, H

2009-01-01

The transition to agro-pastoralism in central Europe has been framed within a dichotomy of "regional continuity" versus exogenous "demic diffusion". While substantial genetic support exists for a model of demographic diffusion from an ancestral source in the Near East, archaeological data furnish weak support for the "wave of advance" model. Nevertheless, archaeological evidence attests the widespread introduction of an exogenous "package" comprising ceramics, cereals, pulses and domesticated animals to central Europe at 5600calBCE. Body proportions are under strong climatic selection and evince remarkable stability within regional lineages. As such, they offer a viable and robust alternative to cranio-facial data in assessing hypothesised continuity and replacement with the transition to agro-pastoralism in central Europe. Humero-clavicular, brachial and crural indices in a large sample (n=75) of Linienbandkeramik (LBK), Late Neolithic and Early Bronze Age specimens from the middle Elbe-Saale-Werra valley (MESV) were compared with Eurasian and African terminal Pleistocene, European Mesolithic and geographically disparate recent human specimens. Mesolithic Europeans display considerable variation in humero-clavicular and brachial indices yet none approach the extreme "hyper-polar" morphology of LBK humans from the MESV. In contrast, Late Neolithic and Early Bronze Age peoples display elongated brachial and crural indices reminiscent of terminal Pleistocene and "tropically adapted" recent humans. These marked morphological changes likely reflect exogenous immigration during the terminal Fourth millennium cal BC. Population expansion and diffusion is a function of increased mobility and settlement dispersal concomitant with significant technological and subsistence changes in later Neolithic societies during the late fourth millennium cal BCE.

Four millennia of Iberian biomolecular prehistory illustrate the impact of prehistoric migrations at the far end of Eurasia

PubMed Central

Valdiosera, Cristina; Vera-Rodríguez, Juan Carlos; Ureña, Irene; Iriarte, Eneko; Rodríguez-Varela, Ricardo; Simões, Luciana G.; Martínez-Sánchez, Rafael M.; Svensson, Emma M.; Malmström, Helena; Rodríguez, Laura; Bermúdez de Castro, José-María; Carbonell, Eudald; Alday, Alfonso; Hernández Vera, José Antonio; Götherström, Anders; Carretero, José-Miguel; Arsuaga, Juan Luis; Smith, Colin I.

2018-01-01

Population genomic studies of ancient human remains have shown how modern-day European population structure has been shaped by a number of prehistoric migrations. The Neolithization of Europe has been associated with large-scale migrations from Anatolia, which was followed by migrations of herders from the Pontic steppe at the onset of the Bronze Age. Southwestern Europe was one of the last parts of the continent reached by these migrations, and modern-day populations from this region show intriguing similarities to the initial Neolithic migrants. Partly due to climatic conditions that are unfavorable for DNA preservation, regional studies on the Mediterranean remain challenging. Here, we present genome-wide sequence data from 13 individuals combined with stable isotope analysis from the north and south of Iberia covering a four-millennial temporal transect (7,500–3,500 BP). Early Iberian farmers and Early Central European farmers exhibit significant genetic differences, suggesting two independent fronts of the Neolithic expansion. The first Neolithic migrants that arrived in Iberia had low levels of genetic diversity, potentially reflecting a small number of individuals; this diversity gradually increased over time from mixing with local hunter-gatherers and potential population expansion. The impact of post-Neolithic migrations on Iberia was much smaller than for the rest of the continent, showing little external influence from the Neolithic to the Bronze Age. Paleodietary reconstruction shows that these populations have a remarkable degree of dietary homogeneity across space and time, suggesting a strong reliance on terrestrial food resources despite changing culture and genetic make-up. PMID:29531053

Pig Domestication and Human-Mediated Dispersal in Western Eurasia Revealed through Ancient DNA and Geometric Morphometrics

PubMed Central

Ottoni, Claudio; Girdland Flink, Linus; Evin, Allowen; Geörg, Christina; De Cupere, Bea; Van Neer, Wim; Bartosiewicz, László; Linderholm, Anna; Barnett, Ross; Peters, Joris; Decorte, Ronny; Waelkens, Marc; Vanderheyden, Nancy; Ricaut, François-Xavier; Çakırlar, Canan; Çevik, Özlem; Hoelzel, A. Rus; Mashkour, Marjan; Mohaseb Karimlu, Azadeh Fatemeh; Sheikhi Seno, Shiva; Daujat, Julie; Brock, Fiona; Pinhasi, Ron; Hongo, Hitomi; Perez-Enciso, Miguel; Rasmussen, Morten; Frantz, Laurent; Megens, Hendrik-Jan; Crooijmans, Richard; Groenen, Martien; Arbuckle, Benjamin; Benecke, Nobert; Strand Vidarsdottir, Una; Burger, Joachim; Cucchi, Thomas; Dobney, Keith; Larson, Greger

2013-01-01

Zooarcheological evidence suggests that pigs were domesticated in Southwest Asia ∼8,500 BC. They then spread across the Middle and Near East and westward into Europe alongside early agriculturalists. European pigs were either domesticated independently or more likely appeared so as a result of admixture between introduced pigs and European wild boar. As a result, European wild boar mtDNA lineages replaced Near Eastern/Anatolian mtDNA signatures in Europe and subsequently replaced indigenous domestic pig lineages in Anatolia. The specific details of these processes, however, remain unknown. To address questions related to early pig domestication, dispersal, and turnover in the Near East, we analyzed ancient mitochondrial DNA and dental geometric morphometric variation in 393 ancient pig specimens representing 48 archeological sites (from the Pre-Pottery Neolithic to the Medieval period) from Armenia, Cyprus, Georgia, Iran, Syria, and Turkey. Our results reveal the first genetic signatures of early domestic pigs in the Near Eastern Neolithic core zone. We also demonstrate that these early pigs differed genetically from those in western Anatolia that were introduced to Europe during the Neolithic expansion. In addition, we present a significantly more refined chronology for the introduction of European domestic pigs into Asia Minor that took place during the Bronze Age, at least 900 years earlier than previously detected. By the 5th century AD, European signatures completely replaced the endemic lineages possibly coinciding with the widespread demographic and societal changes that occurred during the Anatolian Bronze and Iron Ages. PMID:23180578

Exceptionally high levels of lead pollution in the Balkans from the Early Bronze Age to the Industrial Revolution.

PubMed

Longman, Jack; Veres, Daniel; Finsinger, Walter; Ersek, Vasile

2018-05-29

The Balkans are considered the birthplace of mineral resource exploitation and metalworking in Europe. However, since knowledge of the timing and extent of metallurgy in southeastern Europe is largely constrained by discontinuous archaeological findings, the long-term environmental impact of past mineral resource exploitation is not fully understood. Here, we present a high-resolution and continuous geochemical record from a peat bog in western Serbia, providing a clear indication of the extent and magnitude of environmental pollution in this region, and a context in which to place archaeological findings. We observe initial evidence of anthropogenic lead (Pb) pollution during the earliest part of the Bronze Age [∼3,600 years before Common Era (BCE)], the earliest such evidence documented in European environmental records. A steady, almost linear increase in Pb concentration after 600 BCE, until ∼1,600 CE is observed, documenting the development in both sophistication and extent of southeastern European metallurgical activity throughout Antiquity and the medieval period. This provides an alternative view on the history of mineral exploitation in Europe, with metal-related pollution not ceasing at the fall of the western Roman Empire, as was the case in western Europe. Further comparison with other Pb pollution records indicates the amount of Pb deposited in the Balkans during the medieval period was, if not greater, at least similar to records located close to western European mining regions, suggestive of the key role the Balkans have played in mineral resource exploitation in Europe over the last 5,600 years. Copyright © 2018 the Author(s). Published by PNAS.

Molecular history of plague.

PubMed

Drancourt, M; Raoult, D

2016-11-01

Plague, a deadly zoonose caused by the bacterium Yersinia pestis, has been firmly documented in 39 historical burial sites in Eurasia that date from the Bronze Age to two historical pandemics spanning the 6th to 18th centuries. Palaeomicrobiologic data, including gene and spacer sequences, whole genome sequences and protein data, confirmed that two historical pandemics swept over Europe from probable Asian sources and possible two-way-ticket journeys back from Europe to Asia. These investigations made it possible to address questions regarding the potential sources and routes of transmission by completing the standard rodent and rodent-flea transmission scheme. This suggested that plague was transmissible by human ectoparasites such as lice, and that Y. pestis was able to persist for months in the soil, which is a source of reinfection for burrowing mammals. The analyses of seven complete genome sequences from the Bronze Age indicated that Y. pestis was probably not an ectoparasite-borne pathogen in these populations. Further analyses of 14 genomes indicated that the Justinian pandemic strains may have formed a clade distinct from the one responsible for the second pandemic, spanning in Y. pestis branch 1, which also comprises the third pandemic strains. Further palaeomicrobiologic studies must tightly connect with historical and anthropologic studies to resolve questions regarding the actual sources of plague in ancient populations, alternative routes of transmission and resistance traits. Answering these questions will broaden our understanding of plague epidemiology so we may better face the actuality of this deadly infection in countries where it remains epidemic. Copyright © 2016. Published by Elsevier Ltd.

Ancient road transport devices: Developments from the Bronze Age to the Roman Empire

NASA Astrophysics Data System (ADS)

Rossi, Cesare; Chondros, Thomas G.; Milidonis, Kypros F.; Savino, Sergio; Russo, Flavio

2016-03-01

The development of transportation systems has significantly enhanced the welfare and modernization of society. Wooden vehicles pulled by animals have been used for land transportation since the early Bronze Age. Whole-body gharries with rigid wheels pulled by oxen appeared in Crete by 2000 BC or earlier. Horses originating from the East were depicted in early Cretan seal-rings of the same period. The two-wheeled horsedrawn chariot was one of the most important inventions in history. This vehicle provided humanity its first concept of personal transport and was the key technology of war for 2000 years. Chariots of Mycenaean and Archaic Greece with light and flexible four-spoked wheels acting as spring suspensions were depicted in vase paintings. The development of this vehicle incorporated the seeds of a primitive design activity and was important for engineering. The Trojan horse since 1194 BC and the helepolis since 700 BC were the first known machines on a wheeled base transported by horses or self-powered. Ancient engineers invented bearings lubricated with fat, and Romans introduced the ancestors of ball bearings for their wagons and carts. The historic evolution of wheeled transportation systems, along with early traction, suspension, and braking systems, is presented in this paper. Analytical and numerical methods are incorporated to analyze the most conceivable loading situations of typically reconstructed wheeled transportation systems in ancient times. Traction requirements both for horse-driven machines and the power for internal motors are also analyzed. This study can serve as a basis for further development of detailed reconstruction of transportation systems in antiquity.

Hyperostosis frontalis interna - a marker of social status? Evidence from the Bronze-Age "high society" of Qatna, Syria.

PubMed

Flohr, S; Witzel, C

2011-02-01

In 1719 Morgagni described a condition, today known as hyperostosis frontalis interna (HFI), as one sign within a triad consisting of HFI, virilism, and obesity. Today, HFI is predominantly found in older women. Although the etiology of HFI has not yet been determined precisely, the condition has been linked to metabolic disorders. HFI is reported to be rare in the archaeological record and the frequency of the condition is thought to have increased during the 19th and 20th centuries. We present preliminary results on the occurrence of HFI in the commingled human bone assemblage from "tomb VII" discovered underneath the Bronze Age royal palace of the ancient city of Qatna, Syria. A preliminary minimal number of individuals of 70 has been estimated for the as yet not fully analyzed skeletal remains. Skull fragments of nine individuals exhibit endocranial bone formations consistent with HFI. Rarity of stress indicators in the skeletons, the rich grave goods, and the burial place within the area of the Royal palace are suggestive of a high social status and an economically favorable situation of the buried individuals. Assuming that their life style included a high calorie diet in combination with little physical activity, acquired metabolic disorders may have been present in many individuals. The comparatively high number of individuals presenting HFI in the studied sample might therefore be viewed as being related to their high social status. Multiple occurrences of HFI in archaeological skeletal assemblages might serve as a proxy for social status. Copyright © 2010 Elsevier GmbH. All rights reserved.

Selection in Europeans on Fatty Acid Desaturases Associated with Dietary Changes

PubMed Central

Buckley, Matthew T.; Racimo, Fernando; Allentoft, Morten E.; Jensen, Majken K.; Jonsson, Anna; Huang, Hongyan; Hormozdiari, Farhad; Sikora, Martin; Marnetto, Davide; Eskin, Eleazar; Jørgensen, Marit E.; Grarup, Niels; Pedersen, Oluf; Hansen, Torben; Kraft, Peter; Willerslev, Eske

2017-01-01

Abstract FADS genes encode fatty acid desaturases that are important for the conversion of short chain polyunsaturated fatty acids (PUFAs) to long chain fatty acids. Prior studies indicate that the FADS genes have been subjected to strong positive selection in Africa, South Asia, Greenland, and Europe. By comparing FADS sequencing data from present-day and Bronze Age (5–3k years ago) Europeans, we identify possible targets of selection in the European population, which suggest that selection has targeted different alleles in the FADS genes in Europe than it has in South Asia or Greenland. The alleles showing the strongest changes in allele frequency since the Bronze Age show associations with expression changes and multiple lipid-related phenotypes. Furthermore, the selected alleles are associated with a decrease in linoleic acid and an increase in arachidonic and eicosapentaenoic acids among Europeans; this is an opposite effect of that observed for selected alleles in Inuit from Greenland. We show that multiple SNPs in the region affect expression levels and PUFA synthesis. Additionally, we find evidence for a gene–environment interaction influencing low-density lipoprotein (LDL) levels between alleles affecting PUFA synthesis and PUFA dietary intake: carriers of the derived allele display lower LDL cholesterol levels with a higher intake of PUFAs. We hypothesize that the selective patterns observed in Europeans were driven by a change in dietary composition of fatty acids following the transition to agriculture, resulting in a lower intake of arachidonic acid and eicosapentaenoic acid, but a higher intake of linoleic acid and α-linolenic acid. PMID:28333262

Hydrogen-isotope permeation barrier

DOEpatents

Maroni, Victor A.; Van Deventer, Erven H.

1977-01-01

A composite including a plurality of metal layers has a Cu-Al-Fe bronze layer and at least one outer layer of a heat and corrosion resistant metal alloy. The bronze layer is ordinarily intermediate two outer layers of metal such as austenitic stainless steel, nickel alloys or alloys of the refractory metals. The composite provides a barrier to hydrogen isotopes, particularly tritium that can reduce permeation by at least about 30 fold and possibly more below permeation through equal thicknesses of the outer layer material.

Manual of Military Decorations and Awards: DoD Service Awards - Campaign, Expeditionary, and Service Medals. Volume 2

DTIC Science & Technology

2010-11-23

Disaster Relief? Consider Creation of Campaign Medal National Security Threat? Advocate for Activation of National Defense Service Medal Consider...2) Arrowhead Device: The arrowhead device is a bronze replica of an Indian arrowhead 1/4 inch high. It is a Department of the Army device that...device is a bronze replica of an Indian arrowhead 1/4 inch high. It is a Department of the Army device that is authorized for wear on the AFEM. (3

Structural Engineering. Loads. Design Manual 2.2.

DTIC Science & Technology

1981-11-01

cast, rolled 534 Locust 46 Bronze, 7.9 to 14% Sn 509 Maple, hard 43 Bronze, aluminum 481 Maple, white 33 Copper , cast, rolled 556 Oak, chestnut 54... Copper ore, pyrites 262 Oak, live 59 Gold, cast, hammered 1205 Oak, red, black 41 Gold, bars, stacked 1133 Oak, white 46 Gold, coin in bags 1084 Pine...Phosphate rock, apatite 200 Glass, crystal 184 Porphyry 172 Hay and straw - bales 20 Pumice, natural 40 Leather 59 Quartz, flint 165 Paper 58 Sandstone

Evolution of the Structure of Cu-1% Sn Bronze under High Pressure Torsion and Subsequent Annealing

NASA Astrophysics Data System (ADS)

Popov, V. V.; Popova, E. N.; Stolbovsky, A. V.; Falahutdinov, R. M.

2018-04-01

The evolution of the structure of tin bronze under the room-temperature high-pressure torsion with different degrees of deformation and the subsequent annealing has been investigated. The thermal stability of the structure formed, namely, its behavior upon annealing in the temperature range of 150-400°C has been studied. The possibility of alloying copper with tin has been analyzed with the purpose of obtaining a thermally stable nanostructure with high strength characteristics.

Hydrostatic Response of Submarine Nickel Aluminum Bronze Valves with Corrosion Damage

DTIC Science & Technology

2008-07-01

Engineering PO Box 1000 Halifax, Nova Scotia B3J 2X4 Project Manager: Dr. T.S. Koko , 902-425-5101 Contract Number: W7707-078022/001/HAL Contract...Manager: Dr. T.S. Koko , 902-425-5101 ext 243 Contract Number: W7707-078022/001/HAL Contract Scientific Authority: Dr. Y. Wang, 902-427-3035...Hydrostatic Response of Submarine Nickel Aluminum Bronze Valves with Corrosion Damage B.K.C. Yuen; T.S. Koko ; R. Warner; DRDC Atlantic CR 2008

VOYAGE!, a Scale Model of the Solar System on the National Mall

NASA Astrophysics Data System (ADS)

Bennett, J. O.; Schoemer, J.; Goldstein, J. J.

1994-12-01

The Laboratory for Astrophysics (LfA) at the National Air and Space Museum (NASM) is proposing a new exhibit: an outdoor model of the Solar System on the National Mall, dedicated to the Spirit of Human Exploration. At one ten- billionth of the size of the actual Solar System, the model would provide a unique educational tool to illustrate the vast distances that characterize our local corner of the universe. Mounted on pedestals along a gravel walkway between the U.S. Capitol and the Washington Monument for 0.6 kilometers (an easy walk for over 10 million visitors a year), plaques would tactilely depict the scaled sizes and distances of the Sun, the planets, and their larger satellites in polished bronze. Porcelain enamel insets in the bronze would display color photographs, language-independent educational pictograms, and an international pictoral listing of spacecraft that have visited these bodies. Designed for a multi-cultural audience of varied ages and educational backgrounds, and with easy access to persons with disabilities, the model would celebrate humanity's long and ongoing relationship with Earth's nearest neighbors. Ideally, this exhibit will be supported by teacher-activity packets, self-guided tours, exportable models, computer software, and multi-lingual audio programs. This proposal is being partially funded by the NASA Solar Systems division.

The impact of environment change on culture evolution in east Ancient Silk Road.

NASA Astrophysics Data System (ADS)

Dong, G.; Liu, F.; Li, G.; Zhang, D. D.; Lee, H. F.; Chen, F.

2017-12-01

Ancient Silk Road played an important role in culture communication between west and east parts of the Eurasia during Bronze Age and historical period. Tens of archaic civilizations rise and fall in east parts of the Ancient Silk Road, climate change is attributed as one of the most important driving forces, while the process and mechanism for the impact of environmental change on culture evolution in the area has not been well-understood. Here we report new paleoclimate data based on multi-proxy analysis from two well-dated aeolian deposit sequences in the Hexi Corridor and Qaidam basin, where locate at the throat position of the Ancient Silk Road. Comparing with high-resolution tree rings from Qilian Mountain nearby, and archaeological evidence and historical documents, we proposed that two desertification events occurred in west Hexi Corridor between 3400-3100 BP and post 1450 AD, which induced two cultural discontinuity in that area. Climate was dry between 3400-2900 BP and wet between 2900-2000 BP in lowlands of east Qaidam basin, mismatching with the development of Nuomuhong Bronze culture in the area during 3400-2450 BP. We propose culture evolution in east Ancient Silk Road was mainly influenced by precipitation change of highlands in mountain areas,which was further influenced by large-scale vapor transport.

The impact of ancestral heath management on soils and landscapes. A reconstruction based on paleoecological analyses of soil records in the middle and southeast Netherlands.

NASA Astrophysics Data System (ADS)

van Mourik, Jan; Doorenbosch, Marieke

2016-04-01

The evolution of heath lands during the Holocene has been registered in various soil records . Paleoecological analyses of these records enable to reconstruct the changing economic and cultural management of heaths and the consequences for landscape and soils. Heaths are characteristic components of cultural landscape mosaics on sandy soils in the Netherlands. The natural habitat of heather species was moorland. At first, natural events like forest fires and storms caused small-scale forest degradation, in addition on the forest degradation accelerated due to cultural activities like forest grazing, wood cutting and shifting cultivation. Heather plants invaded on degraded forest soils and heaths developed. People learned to use the heaths for economic and cultural purposes. The impact of the heath management on landscape and soils was registered in soil records of barrows, drift sand sequences and plaggic Anthrosols. Based on pollen diagrams of such records we could reconstruct that heaths were developed and used for cattle grazing before the Bronze Age. During the Late Neolithic, the Bronze Age and Iron Age, people created the barrow landscape on the ancestral heaths. After the Iron Age people probably continued with cattle grazing on the heaths and plaggic agriculture until the Early Middle Ages. After 1000 AD two events affected the heaths. At first deforestation for the sale of wood resulted in the first regional extension of sand drifting and heath degradation. After that the introduction of the deep stable economy and heath sods digging resulted in acceleration of the rise of plaggic horizons, severe heath degradation and the second extension of sand drifting. At the end of the 19th century the heath lost its economic value due to the introduction of chemical fertilizers. The heaths were transformed into 'new' arable fields and forests and due to deep ploughing most soil archives were destroyed. Since 1980 AD, the remaining relicts of the ancestral heaths are preserved and restored in the frame of the programs to improve the regional and national geo-biodiversity.

Minimally-invasive Laser Ablation Inductively Coupled Plasma Mass Spectrometry analysis of model ancient copper alloys

NASA Astrophysics Data System (ADS)

Walaszek, Damian; Senn, Marianne; Wichser, Adrian; Faller, Markus; Wagner, Barbara; Bulska, Ewa; Ulrich, Andrea

2014-09-01

This work describes an evaluation of a strategy for multi-elemental analysis of typical ancient bronzes (copper, lead bronze and tin bronze) by means of laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS).The samples originating from archeological experiments on ancient metal smelting processes using direct reduction in a ‘bloomery’ furnace as well as historical casting techniques were investigated with the use of the previously proposed analytical procedure, including metallurgical observation and preliminary visual estimation of the homogeneity of the samples. The results of LA-ICPMS analysis were compared to the results of bulk composition obtained by X-ray fluorescence spectrometry (XRF) and by inductively coupled plasma mass spectrometry (ICPMS) after acid digestion. These results were coherent for most of the elements confirming the usefulness of the proposed analytical procedure, however the reliability of the quantitative information about the content of the most heterogeneously distributed elements was also discussed in more detail.

On Some Mechanical Properties and Wear Behavior of Sintered Bronze Based Composites Reinforced with Some Aluminides Microadditives

NASA Astrophysics Data System (ADS)

Feldshtein, E.; Kiełek, P.; Kiełek, T.; Dyachkova, L.; Letsko, A.

2017-05-01

In the paper, the changes in some mechanical properties and wear behavior of CuSn10 sintered bronze and MMCs based on this bronze reinforced with composite ultrafine aluminide powders FeAl/15 % Al2O3, NiAl/15 % Al2O3 and Ti-46Al-8Cr are described. It was observed that the presence of aluminides in the MMCs leads to an increase in the hardness, but the flexural strength may increase or decrease depending on the type of aluminide. The presence of aluminides in the MMC reduces the wear rate considerably. It is decreased in the direction of FeAl/15 % Al2O3 → NiAl/15 % Al2O3 → Ti-46Al-8Cr aluminides and for the best MMC composition the advantage is about 20 times. In the MMCs wear process, micro-craters are formed on the contact surface and it is the principal reason of a decrease in the wear rate.

A Roman bronze statuette with gilded silver mask from Sardinia: an EDXRF study

NASA Astrophysics Data System (ADS)

Cesareo, Roberto; Brunetti, Antonio; D'Oriano, Rubens; Canu, Alba; Demontis, Gonaria Mattia; Celauro, Angela

2013-12-01

A Roman bronze statuette from the 2nd Century BC was recovered from a nuragic sanctuary close to Florinas, in the north of Sardinia. The facial portion of the statuette is covered by a silver mask, partially gilded and attached to the bronze by tin-lead welding. The silver mask was carefully analyzed by portable energy-dispersive X-ray fluorescence (EDXRF), a non-destructive and non-invasive method. The aim of the analysis was to reconstruct the layered structure of the silver gilt mask, and to determine homogeneity and thickness of the gold, silver and lead-tin sheets. This is possible by using the internal ratio of the X-ray lines, i.e. starting from the surface, Au (L α/L β), Ag (K α/K β), Au-L α/Ag-K α and Pb (L α/L β).The results were compared with those obtained with simulated X-ray spectra, obtained both experimentally and by using the Monte Carlo simulation technique.

Biphase-Interface Enhanced Sodium Storage and Accelerated Charge Transfer: Flower-Like Anatase/Bronze TiO2/C as an Advanced Anode Material for Na-Ion Batteries.

PubMed

Chu, Chenxiao; Yang, Jing; Zhang, Qianqian; Wang, Nana; Niu, Feier; Xu, Xuena; Yang, Jian; Fan, Weiliu; Qian, Yitai

2017-12-20

Flower-like assembly of ultrathin nanosheets composed of anatase and bronze TiO 2 embedded in carbon is successfully synthesized by a simple solvothermal reaction, followed with a high-temperature annealing. As an anode material in sodium-ion batteries, this composite exhibits outstanding electrochemical performances. It delivers a reversible capacity of 120 mA h g -1 over 6000 cycles at 10 C. Even at 100 C, there is still a capacity of 104 mA h g -1 . Besides carbon matrix and hierarchical structure, abundant interfaces between anatase and bronze greatly enhance the performance by offering additional sites for reversible Na + storage and improving the charge-transfer kinetics. The interface enhancements are confirmed by discharge/charge profiles, rate performances, electrochemical impedance spectra, and first-principle calculations. These results offer a new pathway to upgrade the performances of anode materials in sodium-ion batteries.

Weichselian periglacial environments in the northeastern extremety of Europe

NASA Astrophysics Data System (ADS)

Astakhov, V.; Svendsen, J. I.

2009-04-01

Traditional reconstructions of Weichselian environments saw the Peri-Uralian plains as arena either of Late Weichselian glaciation or of predominant aqueous activity which is incompatible with the latest finds of Upper Palaeolithic human activity in the Peri-Uralian Arctic and Subarctic. Now it is proven that the last ice sheet disintegrated before 50 ka BP (Svendsen et al., 2004) and early humans arrived in the Arctic as early as ca 40 ka BP (Svendsen and Pavlov, 2003). Therefore, to understand the natural setting of early human invasions into northeastern European Russia a re-evaluation of periglacial evidences is necessary. Spatially diverse data obtained from sedimentological studies, photogeological interpretation and dating results from various sedimentary formations appear instrumental for assessing the palaeo-environment. Weichselian periglacial events are dated back to ca 80-90 luminescence ka BP when the huge ice-dammed water body called Lake Komi inundated all lowlands below 100 m isohypse in front of an arctic ice sheet (Mangerud et al., 2004). Some 70 ka BP the lake was replaced by a fluvial network that drained the stagnant ice fields recognized as the "Third Terrace" above the present floodplain. Judging from sediment sections in the Yamal Peninsula, wind-blown sand covers started to develop already during MIS 4. A Mid-Weichselian climatic amelioration around 50-30 ka BP can be traced by the "Second Terrace" and from the many gullies with finds of bones of mammals. Pollen record and relict permafrost features indicate that treeless, permafrozen landscapes predominated in the present zone of boreal forest. Nevertheless, a general humidification at around this time is evident from fluvial gravels and diamictic solifluction sheets. Quite different features emerged in the northeast of the Russian Plain during MIS 2. Fluvial sediments are almost absent except for some thin (1-2 m) sand and gravel accumulations caused by local low-energy streams. The discontinuous sedimentary mantle from this period consists largely of various aeolian sands and loess-like silts (Astakhov et al., 1999; Mangerud et al., 1999) with rare wisps of soliflucted diamicts. Dune sands, up to 20 m thick, occur mostly along the Barents Sea coastline, whereas loess-like silts gravitate to the Uralian piedmonts. Most widespread upon all arctic landscape elements are thin (1-3 m) sheets of laminated cover-sand similar to niveo-aeolian deposits described in the Netherlands and elsewhere. Typically the aeolian sands are accompanied by conical residual hillocks with armored deflation summits. Finds of organic remains in surficial sediments younger than 27 and older than 14 radiocarbon ka BP are rare. The aeolian sands and silts have yielded a number of luminescence dates in the range of 33 to 13 calendar ka BP (Mangerud et al., 2002). Macrofauna and a sparse shrub vegetation reappeared after 14 radiocarbon ka BP (Mangerud et al.1999). Another indication of a cold and continental climate is remnants of fossil glacier ice which have survived within arctic diamict sheets for at least 50 ka (Astakhov and Svendsen, 2002). We conclude that most of the Weichselian time the northeastern European Russia was a treeless, landscape with permafrost. An especially dry, frosty and generally inhospitable environment appeared during MIS 2 when the Barents Sea Ice Sheet produced strong katabatic winds across the polar desert. The only period suitable for human invasion from the south was during the MIS 3 when a higher precipitation rate could support meager arboreal vegetation along river valleys. A minor climatic amelioration after 15 radiocarbon ka BP led to formation of the "First Terrace" along the rivers and numerous thermokarst lakes surrounded by shrub land. Only sparse mammal bones, but no traces of human activity are known from the final Pleistocene until the Neolithic times. References - Astakhov V.I., Svendsen J.I., Mangerud J. et al. 1999: Marginal formations of the last Kara and Barents ice sheets in northern European Russia. Boreas 28(1), 23-45. - Astakhov V.I. and Svendsen J.I. 2002: Age of remnants of a Pleistocene glacier in Bol`shezemel`skaya Tundra. Doklady Earth Sciences 384(4), 468-472. - Mangerud, J., Svendsen, J.I. and Astakhov, V.I. 1999: Age and extent of the Barents and Kara Sea ice sheets in Northern Russia. Boreas 28 (1), 46-80. - Mangerud, J., Astakhov, V. and Svendsen, J-I. 2002: The extent of the Barents-Kara Ice Sheet during the Last Glacial Maximum. Quaternary Science Reviews 21 (1-3), 111-119. - Mangerud, J., Jakobsson, M., Alexanderson et al. 2004: Ice-dammed lakes and rerouting of the drainage of northern Eurasia during the Last Glaciation. Quaternary Science Reviews 23(11-13), 1313-1332. - Svendsen, J. I., Alexanderson, H., Astakhov V. et al. 2004: Late Quaternary ice sheet history of Northern Eurasia. Quaternary Science Reviews 23(11-13), 1229-1271. - Svendsen, J.I. and Pavlov, P. 2003: Mamontovaya Kuya: an enigmatic, nearly 40000 years old Paleolithic site in the Russian Arctic. Trabalhos de Arqueologia 33. Lisboa, Instituto Português de Arqueologia, 109-120.

Stress Analysis and Fatigue Behaviour of PTFE-Bronze Layered Journal Bearing under Real-Time Dynamic Loading

NASA Astrophysics Data System (ADS)

Duman, M. S.; Kaplan, E.; Cuvalcı, O.

2018-01-01

The present paper is based on experimental studies and numerical simulations on the surface fatigue failure of the PTFE-bronze layered journal bearings under real-time loading. ‘Permaglide Plain Bearings P10’ type journal bearings were experimentally tested under different real time dynamic loadings by using real time journal bearing test system in our laboratory. The journal bearing consists of a PTFE-bronze layer approximately 0.32 mm thick on the steel support layer with 2.18 mm thick. Two different approaches have been considered with in experiments: (i) under real- time constant loading with varying bearing widths, (ii) under different real-time loadings at constant bearing widths. Fatigue regions, micro-crack dispersion and stress distributions occurred at the journal bearing were experimentally and theoretically investigated. The relation between fatigue region and pressure distributions were investigated by determining the circumferential pressure distribution under real-time dynamic loadings for the position of every 10° crank angles. In the theoretical part; stress and deformation distributions at the surface of the journal bearing analysed by using finite element methods to determine the relationship between stress and fatigue behaviour. As a result of this study, the maximum oil pressure and fatigue cracks were observed in the most heavily loaded regions of the bearing surface. Experimental results show that PTFE-Bronze layered journal bearings fatigue behaviour is better than the bearings include white metal alloy.

Structural and compositional analysis of a casting mold sherd from ancient China.

PubMed

Zong, Yunbing; Yao, Shengkun; Lang, Jianfeng; Chen, Xuexiang; Fan, Jiadong; Sun, Zhibin; Duan, Xiulan; Li, Nannan; Fang, Hui; Zhou, Guangzhao; Xiao, Tiqiao; Li, Aiguo; Jiang, Huaidong

2017-01-01

Casting had symbolic significance and was strictly controlled in the Shang dynasty of ancient China. Vessel casting was mainly distributed around the Shang capital, Yin Ruins, which indicates a rigorous centralization of authority. Thus, for a casting mold to be excavated far from the capital region is rare. In addition to some bronze vessel molds excavated at the Buyao Village site, another key discovery of a bronze vessel mold occurred at Daxinzhuang. The Daxinzhuang site was a core area in the east of Shang state and is an important site to study the eastward expansion of the Shang. Here, combining synchrotron X-rays and other physicochemical analysis methods, nondestructive three-dimensional structure imaging and different elemental analyses were conducted on this mold sherd. Through high penetration X-ray tomography, we obtained insights on the internal structure and discovered some pores. We infer that the generation of pores inside the casting mold sherd was used to enhance air permeability during casting. Furthermore, we suppose that the decorative patterns on the surface were carved and not pasted onto it. Considering the previous compositional studies of bronze vessels, the copper and iron elements were analyzed by different methods. Unexpectedly, a larger amount of iron than of copper was detected on the surface. According to the data analysis and archaeological context, the source of iron on the casting mold sherd could be attributed to local soil contamination. A refined compositional analysis confirms that this casting mold was fabricated locally and used for bronze casting.

K[AsW{sub 2}O{sub 9}], the first member of the arsenate–tungsten bronze family: Synthesis, structure, spectroscopic and non-linear optical properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alekseev, Evgeny V., E-mail: e.alekseev@fz-juelich.de; Institut für Kristallographie, RWTH Aachen, Jägerstraße 17–19 D-52066 Aachen; Felbinger, Olivier

K[AsW{sub 2}O{sub 9}], prepared by high-temperature solid-state reaction, is the first member of the arsenate–tungsten bronze family. The structure of K[AsW{sub 2}O{sub 9}] is based on a 3-dimensional (3D) oxotungstate–arsenate framework with the non-centrosymmetric P2{sub 1}2{sub 1}2{sub 1} space group, a=4.9747(3) Å, b=9.1780(8) Å, c=16.681(2) Å. The material was characterized using X-ray diffraction, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Raman and infrared (IR) spectroscopic techniques. The results of DSC demonstrate that this phase is stable up to 1076 K. Second harmonic generation (SHG) measurements performed on a powder sample demonstrate noticeable (0.1 of LiIO{sub 3}) non-linear optical (NLO)more » activity. - Graphical abstract: K[AsW{sub 2}O{sub 9}], the first member of arsenate–tungsten bronze family exhibit new three dimensional structure type, significant thermal stability and NLO properties. Highlights: • K[AsW{sub 2}O{sub 9}], the first member of the arsenate–tungsten bronze family was synthesized with solid state reaction technique. • Structure of this phase was investigated with X-ray diffraction, IR and Raman spectroscopy and electron microscopy. • Thermal stability of the phase was determinate with DSC techniques. • NLO properties were investigated.« less

Processing parameter optimization for the laser dressing of bronze-bonded diamond wheels

NASA Astrophysics Data System (ADS)

Deng, H.; Chen, G. Y.; Zhou, C.; Li, S. C.; Zhang, M. J.

2014-01-01

In this paper, a pulsed fiber-laser dressing method for bronze-bonded diamond wheels was studied systematically and comprehensively. The mechanisms for the laser dressing of bronze-bonded diamond wheels were theoretically analyzed, and the key processing parameters that determine the results of laser dressing, including the laser power density, pulse overlap ratio, ablation track line overlap ratio, and number of scanning cycles, were proposed for the first time. Further, the effects of these four key parameters on the oxidation-damaged layer of the material surface, the material removal efficiency, the material surface roughness, and the average protrusion height of the diamond grains were explored and summarized through pulsed laser ablation experiments. Under the current experimental conditions, the ideal values of the laser power density, pulse overlap ratio, ablation track line overlap ratio, and number of scanning cycles were determined to be 4.2 × 107 W/cm2, 30%, 30%, and 16, respectively. Pulsed laser dressing experiments were conducted on bronze-bonded diamond wheels using the optimized processing parameters; next, both the normal and tangential grinding forces produced by the dressed grinding wheel were measured while grinding alumina ceramic materials. The results revealed that the normal and tangential grinding forces produced by the laser-dressed grinding wheel during grinding were smaller than those of grinding wheels dressed using the conventional mechanical method, indicating that the pulsed laser dressing technology provides irreplaceable advantages relative to the conventional mechanical dressing method.

The Life and Death of a Mycenaean Port Town: Kalamianos on the Saronic Gulf

NASA Astrophysics Data System (ADS)

Pullen, Daniel

2013-12-01

In the late fourteenth century bc of the Aegean Late Bronze Age (LBA), a large walled settlement was established at Korphos: Kalamianos, on the Saronic Gulf coast of the Corinthia, Greece. Archaeological and geological work by the Saronic harbors Archaeological Research Project has succeeded in reconstructing the LBA coastline and likely harbor basins, as well as documenting the well-preserved plan of an entire Late Helladic town. Kalamianos was a short-lived maritime outpost, purposely founded as a component of state expansion in a climate of intense peer-polity competition in LBA (fifteenth-thirteenth centuries bc) Greece.

Analysis of pigments from Roman wall paintings found in the "agro centuriato" of Julia Concordia (Italy).

PubMed

Mazzocchin, Gian-Antonio; Del Favero, Michela; Tasca, Giovanni

2007-09-01

The analysis of wall painting fragments recovered in the "agro centuriato" of Julia Concordia has been carried out by using Scanning Electron Microscopy equipped with an EDS microanalysis detector (SEM-EDS), Infrared Spectroscopy (FTIR) and X-Ray powder Diffraction (XRD). The pigments used have been identified and the data obtained suggest the presence of three rustic villas richly decorated also with Egyptian blue. The presence of white of aragonite suggest that these villas were decorated during the Imperial Age, in agreement with the recovery of high quality materials and a bronze statue.

Acid rain attack on outdoor sculpture in perspective

NASA Astrophysics Data System (ADS)

Livingston, Richard A.

2016-12-01

A major concern motivating research in acid rain materials effects has been the potential for damage to cultural heritage, particularly outdoor marble and bronze sculpture. However, a combination of field and laboratory studies has failed to show a correlation between rain pH and loss of materials. In order to understand this counterintuitive lack of acid rain effect, an aqueous geochemical modeling approach was used to analyze rain runoff chemistry for the relative importance of acid rain neutralization, dry deposition, and in the case of marble, natural carbonate dissolution. This approach involved the development of pH - SO42- phase diagrams for marble (calcium carbonate) and bronze (copper) under ambient environmental conditions. This then enabled reaction path modeling of the acid neutralization process using the pH range typically found in wet deposition (3.5-6). The results were for marble that the theoretical maximum amount of Ca2+ ion that could be lost due acid rain neutralization would be 0.158 mmol/l compared to 10.5 mmol/l by dry deposition, and for bronze, the Cu2+ ion losses would be 0.21 mmol/l and 47.3 mmol/l respectively. Consequently dry deposition effects on these materials have the potential to dominate over wet deposition effects. To test these predictions the geochemical models were applied to examples of data sets from mass balance (runoff vs rainfall) studies on a marble statue in New York City and some bronze memorial plaques at Gettysburg PA. Although these data sets were collected in the early 1980s they remain valid for demonstrating the mass balance method. For the marble statue, the mean Ca2+ losses by dry deposition was about 69% of the total compared 0.3% for acid rain neutralization, which was less than the natural carbonate dissolution losses of 0.8%. For the bronze, the mean Cu2+ losses were 70.6% by SO42- dry deposition and 23% by NO3- dry deposition compared to 6.4% by acid rain neutralization. Thus for both cases the wet deposition component was less than the variability of the dry deposition components, which explains the observed lack of correlation between the rain pH and the material losses. In addition, for the marble case, there was evidence for HCl acid vapor attack resulting from nitric acid/sea salt interactions and for bronze, ammonium ion may be important. In both cases, significant imbalances suggested that unmeasured organic acids may have a significant effect.

Novel sodium intercalated (NH4)2V6O16 platelets: High performance cathode materials for lithium-ion battery.

PubMed

Fei, Hailong; Wu, Xiaomin; Li, Huan; Wei, Mingdeng

2014-02-01

A simple and versatile method for preparation of novel sodium intercalated (NH4)2V6O16 is developed via a simple hydrothermal route. It is found that ammonium sodium vanadium bronze displays higher discharge capacity and better rate cyclic stability than ammonium vanadium bronze as lithium-ion battery cathode material because of smaller charge transfer resistance, which would favor superior discharge capacity and rate performance. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

Formation of nanocrystalline tetragonal oxide tungsten bronzes on platinum

NASA Astrophysics Data System (ADS)

Kosov, A. V.; Semerikova, O. L.; Vakarin, S. V.; Pankratov, A. A.; Plaksin, S. V.; Zaykov, Yu. P.

2017-02-01

Cyclic voltammetry is used to study the formation of tetragonal oxide tungsten bronze of the composition K x Na y WO3 on a Pt(110) substrate during electrodeposition from a K2WO4-Na2WO4-WO3 melt. The potential ranges in which cathode products of various compositions and morphologies form are found. K x Na(0.66- x)WO3 crystals are shown to form according to the nucleation/growth mechanism. A general scheme is proposed and used to write equations for cathode reactions.

Tests of Lead-bronze Bearings in the DVL Bearing-testing Machine

NASA Technical Reports Server (NTRS)

Fischer, G

1940-01-01

The lead-bronze bearings tested in the DVL machine have proven themselves very sensitive to load changes as in comparison with bearings of light metal. In order to prevent surface injuries and consequently running interruptions, the increase of the load has to be made in small steps with sufficient run-in time between steps. The absence of lead in the running surface, impurities in the alloy (especially iron) and surface irregularities (pores) decreases the load-carrying capacity of the bearing to two or three times that of the static load.

A brief history of tracheostomy and tracheal intubation, from the Bronze Age to the Space Age.

PubMed

Szmuk, Peter; Ezri, Tiberiu; Evron, Shmuel; Roth, Yehudah; Katz, Jeffrey

2008-02-01

To present a concise history of tracheostomy and tracheal intubation for the approximately forty centuries from their earliest description around 2000 BC until the middle of the twentieth century, at which time a proliferation of advances marked the beginning of the modern era of anesthesiology. Review of the literature. The colorful and checkered past of tracheostomy and tracheal intubation informs contemporary understanding of these procedures. Often, the decision whether to perform a life-saving tracheostomy or tracheal intubation has been as important as the technical ability to perform it. The dawn of modern airway management owes its existence to the historical development of increasingly effective airway devices and to regular contributions of research into the pathophysiology of the upper airway.

Human brains found in a fire-affected 4000-years old Bronze Age tumulus layer rich in soil alkalines and boron in Kutahya, Western Anatolia.

PubMed

Altinoz, M A; Ince, B; Sav, A; Dincer, A; Cengiz, S; Mercan, S; Yazici, Z; Bilgen, M N

2014-02-01

Undecomposed human bodies and organs always attracted interest in terms of understanding biological tissue stability and immortality. Amongst these, cases of natural mummification found in glaciers, bog sediments and deserts caused even more attention. In 2010, an archeological excavation of a Bronze Age layer in a tumulus near the Western Anatolia city Kütahya revealed fire affected regions with burnt human skeletons and charred wooden objects. Inside of the cracked skulls, undecomposed brains were discernible. To analyze the burial taphonomy of the rare phenomenon of brain preservation, we analyzed brains, bone, teeth and surrounding soils elements using Inductively Coupled Plasma-Mass Spectrometer (ICP-MS). Adipocere formation or saponification of postmortem tissue fat requires high levels of alkalinity and especially potassium. Indeed, ICP-MS analysis of the brain, teeth and bone and also of the surrounding soil revealed high levels of potassium, magnesium, aluminum and boron, which are compatible with the famous role of Kütahya in tile production with its soil containing high level of alkalines and tile-glazing boron. Fatty acid chromatography revealed simultaneous saturation of fats and protection of fragile unsaturated fatty acids consistent with soil-presence of both pro-oxidant and anti-oxidant trace metals. Computerized tomography revealed protection of diencephalic, metencephalic and occipital tissue in one of the best-preserved specimens. Boron was previously found as an intentional preservative of Tutankhamen and Deir el Bahari mummies. Here, in natural soil with its insect-repellant, anti-bacterial and fire-resistance qualities it may be a factor to preserve heat-affected brains as almost bioporcellain specimens. Copyright © 2013 Elsevier GmbH. All rights reserved.

Ancient DNA from South-East Europe Reveals Different Events during Early and Middle Neolithic Influencing the European Genetic Heritage

PubMed Central

Hervella, Montserrat; Rotea, Mihai; Izagirre, Neskuts; Constantinescu, Mihai; Alonso, Santos; Ioana, Mihai; Lazăr, Cătălin; Ridiche, Florin; Soficaru, Andrei Dorian; Netea, Mihai G.; de-la-Rua, Concepcion

2015-01-01

The importance of the process of Neolithization for the genetic make-up of European populations has been hotly debated, with shifting hypotheses from a demic diffusion (DD) to a cultural diffusion (CD) model. In this regard, ancient DNA data from the Balkan Peninsula, which is an important source of information to assess the process of Neolithization in Europe, is however missing. In the present study we show genetic information on ancient populations of the South-East of Europe. We assessed mtDNA from ten sites from the current territory of Romania, spanning a time-period from the Early Neolithic to the Late Bronze Age. mtDNA data from Early Neolithic farmers of the Starčevo Criş culture in Romania (Cârcea, Gura Baciului and Negrileşti sites), confirm their genetic relationship with those of the LBK culture (Linienbandkeramik Kultur) in Central Europe, and they show little genetic continuity with modern European populations. On the other hand, populations of the Middle-Late Neolithic (Boian, Zau and Gumelniţa cultures), supposedly a second wave of Neolithic migration from Anatolia, had a much stronger effect on the genetic heritage of the European populations. In contrast, we find a smaller contribution of Late Bronze Age migrations to the genetic composition of Europeans. Based on these findings, we propose that permeation of mtDNA lineages from a second wave of Middle-Late Neolithic migration from North-West Anatolia into the Balkan Peninsula and Central Europe represent an important contribution to the genetic shift between Early and Late Neolithic populations in Europe, and consequently to the genetic make-up of modern European populations. PMID:26053041

Four millennia of Iberian biomolecular prehistory illustrate the impact of prehistoric migrations at the far end of Eurasia.

PubMed

Valdiosera, Cristina; Günther, Torsten; Vera-Rodríguez, Juan Carlos; Ureña, Irene; Iriarte, Eneko; Rodríguez-Varela, Ricardo; Simões, Luciana G; Martínez-Sánchez, Rafael M; Svensson, Emma M; Malmström, Helena; Rodríguez, Laura; Bermúdez de Castro, José-María; Carbonell, Eudald; Alday, Alfonso; Hernández Vera, José Antonio; Götherström, Anders; Carretero, José-Miguel; Arsuaga, Juan Luis; Smith, Colin I; Jakobsson, Mattias

2018-03-27

Population genomic studies of ancient human remains have shown how modern-day European population structure has been shaped by a number of prehistoric migrations. The Neolithization of Europe has been associated with large-scale migrations from Anatolia, which was followed by migrations of herders from the Pontic steppe at the onset of the Bronze Age. Southwestern Europe was one of the last parts of the continent reached by these migrations, and modern-day populations from this region show intriguing similarities to the initial Neolithic migrants. Partly due to climatic conditions that are unfavorable for DNA preservation, regional studies on the Mediterranean remain challenging. Here, we present genome-wide sequence data from 13 individuals combined with stable isotope analysis from the north and south of Iberia covering a four-millennial temporal transect (7,500-3,500 BP). Early Iberian farmers and Early Central European farmers exhibit significant genetic differences, suggesting two independent fronts of the Neolithic expansion. The first Neolithic migrants that arrived in Iberia had low levels of genetic diversity, potentially reflecting a small number of individuals; this diversity gradually increased over time from mixing with local hunter-gatherers and potential population expansion. The impact of post-Neolithic migrations on Iberia was much smaller than for the rest of the continent, showing little external influence from the Neolithic to the Bronze Age. Paleodietary reconstruction shows that these populations have a remarkable degree of dietary homogeneity across space and time, suggesting a strong reliance on terrestrial food resources despite changing culture and genetic make-up. Copyright © 2018 the Author(s). Published by PNAS.

Ancient DNA from South-East Europe Reveals Different Events during Early and Middle Neolithic Influencing the European Genetic Heritage.

PubMed

Hervella, Montserrat; Rotea, Mihai; Izagirre, Neskuts; Constantinescu, Mihai; Alonso, Santos; Ioana, Mihai; Lazăr, Cătălin; Ridiche, Florin; Soficaru, Andrei Dorian; Netea, Mihai G; de-la-Rua, Concepcion

2015-01-01

The importance of the process of Neolithization for the genetic make-up of European populations has been hotly debated, with shifting hypotheses from a demic diffusion (DD) to a cultural diffusion (CD) model. In this regard, ancient DNA data from the Balkan Peninsula, which is an important source of information to assess the process of Neolithization in Europe, is however missing. In the present study we show genetic information on ancient populations of the South-East of Europe. We assessed mtDNA from ten sites from the current territory of Romania, spanning a time-period from the Early Neolithic to the Late Bronze Age. mtDNA data from Early Neolithic farmers of the Starčevo Criş culture in Romania (Cârcea, Gura Baciului and Negrileşti sites), confirm their genetic relationship with those of the LBK culture (Linienbandkeramik Kultur) in Central Europe, and they show little genetic continuity with modern European populations. On the other hand, populations of the Middle-Late Neolithic (Boian, Zau and Gumelniţa cultures), supposedly a second wave of Neolithic migration from Anatolia, had a much stronger effect on the genetic heritage of the European populations. In contrast, we find a smaller contribution of Late Bronze Age migrations to the genetic composition of Europeans. Based on these findings, we propose that permeation of mtDNA lineages from a second wave of Middle-Late Neolithic migration from North-West Anatolia into the Balkan Peninsula and Central Europe represent an important contribution to the genetic shift between Early and Late Neolithic populations in Europe, and consequently to the genetic make-up of modern European populations.

Micro-chemical and metallurgical study of Samnite bronze belts from ancient Abruzzo (central Italy, VIII-IV BC)

NASA Astrophysics Data System (ADS)

Riccucci, Cristina; Ingo, Gabriel Maria; Faustoferri, Amalia; Pierigè, Maria Isabella; Parisi, Erica Isabella; Di Carlo, Gabriella; De Caro, Tilde; Faraldi, Federica

2013-12-01

The Samnite bronze belts and the chest disk cuirasses (VIII-IV BC) are the distinctive defensive weapons of the Samnite warriors having likely also a symbolic relevance. These artefacts were mainly found during the archaeological excavations of warriors' graves from ancient Abruzzo (central Italy). Their chemical composition, metallurgical features and corrosion products formed during the long-term burial have been studied by means of the combined use of analytical techniques such as optical microscopy (OM), scanning electron microscopy coupled with energy-dispersive X-ray micro-analysis (SEM-EDS), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The micro-chemical and structural results show that the bronze belts have often been produced by using unusual high-tin bronze alloys achieving a silver-like appearance and by performing tailored cycles of thermal treatments under reducing conditions and hot mechanical working aimed to shape the high-tin alloys in the form of a thin bronze sheet. Furthermore, the investigation has shown that the main alloying elements have been transformed during the burial into mineral species giving rise to the formation of stratified structures constituted by different mineral phases such as tin oxides, cuprous oxide (Cu2O) and copper carbonates (azurite (Cu3(CO3)2(OH)2 and malachite (CuCO3Cu(OH)2)) as well as dangerous chlorine-based compounds such as nantokite (CuCl) and atacamite (Cu2(OH)3Cl) polymorphs. This information evidences the strict interaction of the alloying elements with the soil components as well as the occurrence of the copper cyclic corrosion as a post-burial degradation phenomenon. The present study confirms that the combined micro-chemical and micro-structural investigation techniques such as SEM-EDS, XPS, XRD and OM can be successfully used to investigate the technological production processes of the ancient artefacts and to achieve the detailed micro-chemical and structural description of the corrosion products useful for the identification of degradation agents and mechanisms and, thereafter, to propose a reliable tailored strategy for the conservation.

Squamous epithelium formation in the respiratory intestine of the bronze Corydoras Corydoras aeneus (Callichthyidae Teleostei).

PubMed

Satora, Leszek; Kozioł, Katarzyna; Zebrowski, Jacek

2017-06-01

Accessory respiratory organs in fish exhibit great diversity but share the presence of numerous capillaries covered by a simple squamous epithelium. The adoption of the intestine for respiratory function needs certain special modifications. In this study, we explored immunohistochemical and metabolic fingerprint features that could underlay this adaptation in bronze corydoras Corydoras aeneus. Immunohistochemical localization of the cytoplasmic domain of epidermal growth factor receptor (EGFR) in the respiratory part of intestine demonstrated a strong positive immunoreaction in epithelial cells and connective tissue. Fourier Transfer Infrared (FTIR) spectroscopy coupled with chemometrics discriminated between anterior and posterior region of intestine in terms of secondary structure of proteins and the abundance of p-cresol and other phenolics. The latter were reduced in the posterior part of intestine, indicating the cessation of digestive function in this region. It has been suggested that aquatic hypoxia via endocrine cells (hypoxia-sensitive) activate EGFR, which induce proliferation of squamous epithelial cells, thereby enabling gas diffusion in the posterior part of intestine. It seems that hypoxia and normoxia are opposed conditions adjusting the production of squamous epithelial cells in this intestine. The physiological role of EGFR in the respiratory intestine of bronze corydoras is of interest not only from an evolutionary aspect but also in terms of a potential model for observations process proliferation squamous epithelial cells. Future investigations on the molecular responses to different water oxygen levels in air-breathing bronze corydoras fish are required to clarify the mechanism responsible for squamous cell proliferation. Copyright © 2017 Elsevier GmbH. All rights reserved.

Structural and compositional analysis of a casting mold sherd from ancient China

PubMed Central

Zong, Yunbing; Yao, Shengkun; Lang, Jianfeng; Chen, Xuexiang; Fan, Jiadong; Sun, Zhibin; Duan, Xiulan; Li, Nannan; Fang, Hui; Zhou, Guangzhao; Xiao, Tiqiao; Li, Aiguo; Jiang, Huaidong

2017-01-01

Casting had symbolic significance and was strictly controlled in the Shang dynasty of ancient China. Vessel casting was mainly distributed around the Shang capital, Yin Ruins, which indicates a rigorous centralization of authority. Thus, for a casting mold to be excavated far from the capital region is rare. In addition to some bronze vessel molds excavated at the Buyao Village site, another key discovery of a bronze vessel mold occurred at Daxinzhuang. The Daxinzhuang site was a core area in the east of Shang state and is an important site to study the eastward expansion of the Shang. Here, combining synchrotron X-rays and other physicochemical analysis methods, nondestructive three-dimensional structure imaging and different elemental analyses were conducted on this mold sherd. Through high penetration X-ray tomography, we obtained insights on the internal structure and discovered some pores. We infer that the generation of pores inside the casting mold sherd was used to enhance air permeability during casting. Furthermore, we suppose that the decorative patterns on the surface were carved and not pasted onto it. Considering the previous compositional studies of bronze vessels, the copper and iron elements were analyzed by different methods. Unexpectedly, a larger amount of iron than of copper was detected on the surface. According to the data analysis and archaeological context, the source of iron on the casting mold sherd could be attributed to local soil contamination. A refined compositional analysis confirms that this casting mold was fabricated locally and used for bronze casting. PMID:28296963

Can Mass Trapping Reduce Thrips Damage and Is It Economically Viable? Management of the Western Flower Thrips in Strawberry

PubMed Central

Sampson, Clare; Kirk, William D. J.

2013-01-01

The western flower thrips Frankliniella occidentalis (Pergande) (Thysanoptera: Thripidae) is a cosmopolitan, polyphagous insect pest that causes bronzing to fruit of strawberry (Fragaria x ananassa). The main aim of this study was to test whether mass trapping could reduce damage and to predict whether this approach would be economically viable. In semi-protected strawberry crops, mass trapping of F. occidentalis using blue sticky roller traps reduced adult thrips numbers per flower by 61% and fruit bronzing by 55%. The addition of the F. occidentalis aggregation pheromone, neryl (S)-2-methylbutanoate, to the traps doubled the trap catch, reduced adult thrips numbers per flower by 73% and fruit bronzing by 68%. The factors affecting trapping efficiency through the season are discussed. Damage that would result in downgrading of fruit to a cheaper price occurred when bronzing affected about 10% of the red fruit surface. Cost-benefit analysis using this threshold showed that mass trapping of thrips using blue sticky roller traps can be cost-effective in high-value crops. The addition of blue sticky roller traps to an integrated pest management programme maintained thrips numbers below the damage threshold and increased grower returns by a conservative estimate of £2.2k per hectare. Further work is required to develop the F. occidentalis aggregation pheromone for mass trapping and to determine the best timing for trap deployment. Mass trapping of thrips is likely to be cost-effective in other countries and other high-value crops affected by F. occidentalis damage, such as cucumber and cut flowers. PMID:24282554

The impact of ancestral heath management on soils and landscapes: a reconstruction based on paleoecological analyses of soil records in the central and southeastern Netherlands

NASA Astrophysics Data System (ADS)

Doorenbosch, Marieke; van Mourik, Jan M.

2016-07-01

The evolution of heathlands during the Holocene has been registered in various soil records. Paleoecological analyses of these records enable reconstruction of the changing economic and cultural management of heaths and the consequences for landscape and soils. Heaths are characteristic components of cultural landscape mosaics on sandy soils in the Netherlands. The natural habitat of heather species was moorland. At first, natural events like forest fires and storms caused small-scale forest degradation; in addition on that, the forest degradation accelerated due to cultural activities like forest grazing, wood cutting, and shifting cultivation. Heather plants invaded degraded forest soils, and heaths developed. People learned to use the heaths for economic and cultural purposes. The impact of the heath management on landscape and soils was registered in soil records of barrows, drift sand sequences, and plaggic Anthrosols. Based on pollen diagrams of such records we could reconstruct that heaths were developed and used for cattle grazing before the Bronze Age. During the late Neolithic, the Bronze Age, and Iron Age, people created the barrow landscape on the ancestral heaths. After the Iron Age, people probably continued with cattle grazing on the heaths and plaggic agriculture until the early Middle Ages. Severe forest degradation by the production of charcoal for melting iron during the Iron Age till the 6th-7th century and during the 11th-13th century for the trade of wood resulted in extensive sand drifting, a threat to the valuable heaths. The introduction of the deep, stable economy and heath sods digging in the course of the 18th century resulted in acceleration of the rise of plaggic horizons, severe heath degradation, and again extension of sand drifting. At the end of the 19th century heath lost its economic value due to the introduction of chemical fertilizers. The heaths were transformed into "new" arable fields and forests, and due to deep ploughing most soil archives were destroyed. Since AD 1980, the remaining relicts of the ancestral heaths are preserved and restored in the frame of the programs to improve the regional and national geo-biodiversity. Despite the realization of many heath restoration projects during the last decades, the area of the present heaths is just a fraction of the heath areal in AD 1900.

Vegetation history reconstructed from anthracology and pollen analysis at the rescue excavation of the MO Motorway, Hungary

NASA Astrophysics Data System (ADS)

Náfrádi, Katalin; Bodor, Elvira; Törőcsik, Tünde; Sümegi, Pál

2011-12-01

The significance of geoarchaeological investigations is indisputable in reconstructing the former environment and in studying the relationship between humans and their surroundings. Several disciplines have developed during the last few decades to give insight into earlier time periods and their climatic conditions (e.g. palynology, malacology, archaeobotany, phytology and animal osteology). Charcoal and pollen analytical studies from the rescue excavation of the MO motorway provide information about the vegetation changes of the past. These methods are used to reconstruct the environment of the former settlements and to detect the human impact and natural climatic changes. The sites examined span the periods of the Late-Copper Age, Late-Bronze Age, Middle-Iron Age, Late-Iron Age, Sarmatian period, Late Sarmatian period, Migration period, Late-Migration period and Middle Ages. The vegetation before the Copper Age is based only on pollen analytical data. Anthracological results show the overall dominance of Quercus and a great number of Ulmus, Fraxinus, Acer, Fagus, Alnus and Populus/Salix tree fossils, as well as the residues of fruit trees present in the charred wood assemblage.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ajayi, O. O.; Lorenzo-Martin, Cinta

This study presents results of an experimental study to evaluate friction stir processing (FSP) with and without hard second-phase particle incorporation as a means to enhance surface properties and wear performance of C86300 manganese bronze alloy. FSP of flat bronze alloy specimens was conducted with hardened H-13 tool steel to create a 3-mm-thick processed surface layer. The process was also used to incorporate B 4C particles, thereby creating a metal-matrix composite layer on the alloy surface. FSP alone was observed to produce substantial reduction in grain size (from an initial value of 350 mu m to 1-5 μm). FSP withoutmore » particle incorporation resulted in modest surface hardening due to grain refinement and dispersion hardening. Under lubricated contact in block-on-ring testing with a hardened steel counter face, FSP produced substantial reduction (about 3X) in bronze wear after polishing of processing surface roughening. FSP with hard B 4C second-phase particle incorporation further reduced wear by up to 20X. The improvement in wear behavior is attributed to grain refinement and load shielding by second-phase particles, as determined by wear mechanism analysis.« less

[The affinity between Le family of Tong Ren Tang and acu-moxibustion as viewed from Mian xue tang zhen jiu ji cheng (Mian Xuetang's Synthetic Work of Acu-moxibustion)].

PubMed

Huang, L X

2017-11-28

This compilation process of Mian xue tang zhen jiu ji cheng ( Mian Xuetang ' s Synthetic Work of Acu - moxibustion )was quite mysterious, the book's advent coincidentally met with several major historical events which made its value of decoding its historical functions far beyond its academic value. The editor of this book is Le Xianyang, the founder of Tong Ren Tang. While compiling this book, he also made a replica of Ming-Dynasty's Zhengtong bronze statue. More than 200 years later, Le Jingyu, the 12th generation of the Le family revised Ming Tang Tu inherited from his ancestors and engraved Ming Tang Tu on the stone for its standardization. This great achievement of Le family was no less than the recasting of the Tiansheng bronze statue and the reengraving Tong ren shu xue zhen jiu tu jing ( Illustrated Manual of Acupuncture Points of the Bronze Figure ) by support of state power for building the Beijing Imperial Hospital in the eighth year of the Zhengtong reign (1443).

Nanoscale building blocks in a novel lithium arsenotungsten bronze: Synthesis and characterization

DOE PAGES

Zhao, Pei; Mangir Murshed, M.; Huq, Ashfia; ...

2015-02-19

Here we report on a novel compound Li 3AsW 7O 25 obtained by solid-state reaction and characterized by diffraction and spectroscopic methods. The bronze-type compound crystallizes in the orthorhombic space group Pbca with a=724.38(3) pm, b=1008.15(4) pm, c=4906.16(17) pm and Z=8. The structure is built up by chains of WO 6 octahedra interconnected by AsO 4 tetrahedra and WO 6 octahedra forming a polyhedral arrangement as seen in intergrowth tungsten bronzes. The X-ray single crystal structure refinement allows solving the complex arsenotungstate framework. The powder neutron diffraction data analysis locates the lithium atoms. Thermal analysis showed that Li 3AsW 7Omore » 25 is stable up to its melting at 1135(3) K followed by a decomposition at 1182(5) K. Finally, the Kubelka-Munk treatment of the UV-vis spectrum revealed a wide band gap in the range of 2.84-3.40 eV depending on the presumed electron transition type.« less

Multifilamentary niobium tin magnet conductors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larbalestier, D.C.; Madsen, P.E.; Lee, J.A.

1975-03-01

Practical magnet conductors of multifilamentary Nb$sub 3$Sn have been produced. Evaluation of these bronze route conductors is described. Conductors studied range from a 1369 filament all-bronze matrix conductor to 5143 and approximately 42,000 filament conductors, containing internal high purity copper protected by diffusion barriers. Filament sizes vary from approximately 3 to 8 $mu$m diameter. The effect of heat treatment conditions on critical current and transition temperature is presented and it is shown that overall critical current densities greater than those available in niobium titanium can now be produced in multifilamentary Nb$sub 3$Sn magnet conductor.

Archaeometallurgical characterization of the earliest European metal helmets

PubMed Central

Mödlinger, Marianne; Piccardo, Paolo; Kasztovszky, Zsolt; Kovács, Imre; Szőkefalvi-Nagy, Zoltán; Káli, György; Szilágyi, Veronika

2013-01-01

Archaeometric analyses on conical and decorated cap helmets from the Bronze Age are presented. The helmets are dated to the 14–12th century BC according to associated finds in hoards. Alloy composition, material structure and manufacturing processes are determined and shed light on the earliest development of weaponry production in Central and Eastern Europe. Analyses were carried out using light and dark field microscopy, SEM–EDXS, PIXE, TOF-ND and PGAA. The results allowed reconstructing the manufacturing process, the differences between the cap of the helmets and their knobs (i.e. alloy composition) and the joining technique of the two parts. PMID:26523114

Santorini eruption radiocarbon dated to 1627-1600 B.C.

PubMed

Friedrich, Walter L; Kromer, Bernd; Friedrich, Michael; Heinemeier, Jan; Pfeiffer, Tom; Talamo, Sahra

2006-04-28

Precise and direct dating of the Minoan eruption of Santorini (Thera) in Greece, a global Bronze Age time marker, has been made possible by the unique find of an olive tree, buried alive in life position by the tephra (pumice and ashes) on Santorini. We applied so-called radiocarbon wiggle-matching to a carbon-14 sequence of tree-ring segments to constrain the eruption date to the range 1627-1600 B.C. with 95.4% probability. Our result is in the range of previous, less precise, and less direct results of several scientific dating methods, but it is a century earlier than the date derived from traditional Egyptian chronologies.

[Study of Siberian population movements: use of multiple markers].

PubMed

Ludes, Bertrand

2012-06-01

To further explore early Eurasian steppe migration, we determined the Y chromosome and mitochondrial haplotypes of 26 ancient human specimens from the Krasnoyarsk area, dated between the middle of the second millennium BC and the fourth century AD. Our autosomal Y chromosome and mitochondrial DNA analyses reveal that, whereas few specimens seem to be related matrilineally or patrilineally, nearly all the subjects belong to haplogroup R1a1--M17, which is thought to mark the eastward migration of early Indo-Europeans. Our results also confirm that, during the Bronze and Iron Ages, southern Siberia was a region of overwhelming European settlement.

Features of the method of large-scale paleolandscape reconstructions

NASA Astrophysics Data System (ADS)

Nizovtsev, Vyacheslav; Erman, Natalia; Graves, Irina

2017-04-01

The method of paleolandscape reconstructions was tested in the key area of the basin of the Central Dubna, located at the junction of the Taldom and Sergiev Posad districts of the Moscow region. A series of maps was created which shows paleoreconstructions of the original (indigenous) living environment of initial settlers during main time periods of the Holocene age and features of human interaction with landscapes at the early stages of economic development of the territory (in the early and middle Holocene). The sequence of these works is as follows. 1. Comprehensive analysis of topographic maps of different scales and aerial and satellite images, stock materials of geological and hydrological surveys and prospecting of peat deposits, archaeological evidence on ancient settlements, palynological and osteological analysis, analysis of complex landscape and archaeological studies. 2. Mapping of factual material and analyzing of the spatial distribution of archaeological sites were performed. 3. Running of a large-scale field landscape mapping (sample areas) and compiling of maps of the modern landscape structure. On this basis, edaphic properties of the main types of natural boundaries were analyzed and their resource base was determined. 4. Reconstruction of lake-river system during the main periods of the Holocene. The boundaries of restored paleolakes were determined based on power and territorial confinement of decay ooze. 5. On the basis of landscape and edaphic method the actual paleolandscape reconstructions for the main periods of the Holocene were performed. During the reconstructions of the original, indigenous flora we relied on data of palynological studies conducted on the studied area or in similar landscape conditions. 6. The result was a retrospective analysis and periodization of the settlement process, economic development and the formation of the first anthropogenically transformed landscape complexes. The reconstruction of the dynamics of the development of landscapes and lake system in the early and middle Holocene in the middle reaches of the river Dubna helped restore paleo-ecological picture and nature use system in the studied area in the Mesolithic, Neolithic and Bronze Age. The settlements, existing during several eras, are located mostly at the confluence of rivers or streams in a lake or the main river, i.e., points of the highest concentration of fish, with good overview of areas and existing water barrier against predators. Therefore, monuments of the Mesolithic and Neolithic are mainly located in dense groups. In the Bronze Age there is a transition to a producing economy - floodplain cattle breeding. The monuments of the Bronze Age, and not just settlements, were scattered farther away over the territory, in contrast to the monuments of previous eras. Apparently, Fatyanovo people, by virtue of their producing economy, were less tied to a particular landscape complexes and the resource base was crucial for cultures of appropriating economy (Mesolithic, Neolithic). Based on the analysis of open settlement locations, we can conclude that the studied settlements were clearly incorporated into the landscape conditions needed for settlers' living. The work is performed under project № 17-05-00662of the Russian Foundation for Basic Research

A Novel Cu-10Zn-1.5Ni-0.34Si Alloy with Excellent Mechanical Property Through Precipitation Hardening

NASA Astrophysics Data System (ADS)

Chen, Wei; Wang, Mingpu; Li, Zhou; Dong, Qiyi; Jia, Yanlin; Xiao, Zhu; Zhang, Rui; Yu, Hongchun

2016-11-01

A novel Cu-10Zn-1.5Ni-0.34Si alloy was designed to replace the expensive tin-phosphor bronze in this paper. The alloy had better comprehensive mechanical properties than traditional C5191 alloy. The aged Cu-10Zn-1.5Ni-0.34Si alloy had a hardness of 220 HV, electrical conductivity of 28.5% IACS, tensile strength of 650 MPa, yield strength of 575 MPa and elongation of 13%. Ni2Si precipitates formed during aging, and the crystal orientation relationship between matrix and precipitates was: (001)α//(001)δ, and [110]α//[100]δ. Ductile fracture surface with deep cavities was found in the alloy. Solid solution strengthening, deformation strengthening and precipitation strengthening were found to be core strengthening mechanisms in the alloy.

Archaeoastronomical Information in the Study of Cremation Necropolis: Preliminary Study

NASA Astrophysics Data System (ADS)

Mejuto, J.; Cerde, M. L.; Rodríguez, C.

2009-08-01

This work remarks the significance that archaeoastronomical studies have for archaeological research. These studies provide us data about the perception that ancient societies had about astronomical events and how these facts were added to their religious and ideological world. Thus, archaeoastronomy become a valuable source of information when aimed to solve any question involving the ancient societies. We take as reference in this work some of the Late Bronze Age{'}s cremation necropolis, representatives of usually called Urnfields, to check if their design can be related to some celestial phenomena: Can Bech de Baix (Gerona), Can Pitieu-Can Roqueta(Barcelona), Molá (Tarragona), Can Missert (Tarragona), Les Obagues (Tarragona), La Colomina (Lleida) and La Torraza (Navarra). Likewise a new standard in archaeological excavations maps is proposed. This will allow getting the information more available and improving further studies.

Ancient genomic changes associated with domestication of the horse.

PubMed

Librado, Pablo; Gamba, Cristina; Gaunitz, Charleen; Der Sarkissian, Clio; Pruvost, Mélanie; Albrechtsen, Anders; Fages, Antoine; Khan, Naveed; Schubert, Mikkel; Jagannathan, Vidhya; Serres-Armero, Aitor; Kuderna, Lukas F K; Povolotskaya, Inna S; Seguin-Orlando, Andaine; Lepetz, Sébastien; Neuditschko, Markus; Thèves, Catherine; Alquraishi, Saleh; Alfarhan, Ahmed H; Al-Rasheid, Khaled; Rieder, Stefan; Samashev, Zainolla; Francfort, Henri-Paul; Benecke, Norbert; Hofreiter, Michael; Ludwig, Arne; Keyser, Christine; Marques-Bonet, Tomas; Ludes, Bertrand; Crubézy, Eric; Leeb, Tosso; Willerslev, Eske; Orlando, Ludovic

2017-04-28

The genomic changes underlying both early and late stages of horse domestication remain largely unknown. We examined the genomes of 14 early domestic horses from the Bronze and Iron Ages, dating to between ~4.1 and 2.3 thousand years before present. We find early domestication selection patterns supporting the neural crest hypothesis, which provides a unified developmental origin for common domestic traits. Within the past 2.3 thousand years, horses lost genetic diversity and archaic DNA tracts introgressed from a now-extinct lineage. They accumulated deleterious mutations later than expected under the cost-of-domestication hypothesis, probably because of breeding from limited numbers of stallions. We also reveal that Iron Age Scythian steppe nomads implemented breeding strategies involving no detectable inbreeding and selection for coat-color variation and robust forelimbs. Copyright © 2017, American Association for the Advancement of Science.

Ancient genomes document multiple waves of migration in Southeast Asian prehistory.

PubMed

Lipson, Mark; Cheronet, Olivia; Mallick, Swapan; Rohland, Nadin; Oxenham, Marc; Pietrusewsky, Michael; Pryce, Thomas Oliver; Willis, Anna; Matsumura, Hirofumi; Buckley, Hallie; Domett, Kate; Hai, Nguyen Giang; Hiep, Trinh Hoang; Kyaw, Aung Aung; Win, Tin Tin; Pradier, Baptiste; Broomandkhoshbacht, Nasreen; Candilio, Francesca; Changmai, Piya; Fernandes, Daniel; Ferry, Matthew; Gamarra, Beatriz; Harney, Eadaoin; Kampuansai, Jatupol; Kutanan, Wibhu; Michel, Megan; Novak, Mario; Oppenheimer, Jonas; Sirak, Kendra; Stewardson, Kristin; Zhang, Zhao; Flegontov, Pavel; Pinhasi, Ron; Reich, David

2018-05-17

Southeast Asia is home to rich human genetic and linguistic diversity, but the details of past population movements in the region are not well known. Here, we report genome-wide ancient DNA data from eighteen Southeast Asian individuals spanning from the Neolithic period through the Iron Age (4100-1700 years ago). Early farmers from Man Bac in Vietnam exhibit a mixture of East Asian (southern Chinese agriculturalist) and deeply diverged eastern Eurasian (hunter-gatherer) ancestry characteristic of Austroasiatic speakers, with similar ancestry as far south as Indonesia providing evidence for an expansive initial spread of Austroasiatic languages. By the Bronze Age, in a parallel pattern to Europe, sites in Vietnam and Myanmar show close connections to present-day majority groups, reflecting substantial additional influxes of migrants. Copyright © 2018, American Association for the Advancement of Science.

Problems in archaeomagnetic reference curves elaboration in the prehistoric past.

NASA Astrophysics Data System (ADS)

Avramova, M.; Kovacheva, M.; Boyadziev, Y.

2012-04-01

Most important task of archaeomagnetic studies is the construction of the geomagnetic field secular variations in the past for a given territory. The obtained reference curves would be precise only when a large number of well-dated archaeological sites from different time periods are included as input data. Sofia Palaeomagnetic laboratory is the first one in the Balkans to accumulate a large number of data spanning the time interval of 3000 BP to 8000 BP. Many archaeological sites in Bulgaria are multilevel settlements with clear stratigraphy. Commonly the prehistoric sites are dated according to the relative chronology, the type of archaeological artifacts found and 14C dates, the latter being not always available. The biggest difficulty is that usually the radiocarbon dates are not well constrained, often contradictory to the vertical stratigraphy. The transformation of conventional 14C dates to absolute dates BC depends a lot on which part of dendrochronological calibration curve are they related. Besides, multiple dating intervals are often obtained and the calibrated intervals are usually very large (from 100 to 300 and more years). However, when archaeological discoveries of multilevel prehistoric sites are combined with archaeomagnetic investigations the corresponding archaeomagnetic profiles can be obtained. Currently we have archaeomagnetic data for fifteen prehistoric multilevel sites - two of them are Neolithic, nine - Eneolithic and four are from the Bronze Age. The next step is to juxtapose these stratigraphic profiles with the absolute scale of time having in mind that not all sites and layers have 14C dates. Thanks to abundance of 14C dates for most of Bulgarian prehistoric sites, multilayer sites connected with the absolute chronology exist and can be used as reference profiles. The time frames of each horizon for such reference site are based on series of 14C dates (not single measurements), the analysis of the thickness of layers, type of material dated (perennial or annual) and cultural features. An example for such reference profile is the multilevel site Yunatzite from the Early Bronze Age. The comparison of archaeomagnetic profile Yunatzite with another archaeomagnetically studied Early Bronze Age multilevel site Djadovo shows very good agreement. Comparisons of other archaeomagnetic profiles available for Bulgaria related to the same epoch or sub-epoch will be presented. The expected correspondence can help the refinement of chronology of sites having only stratigraphic profiles. In our opinion the observed discrepancies between the local PSVCs for a given geographical region might be due mainly to the above described difficulties for elaboration of these curves in the prehistory. The further refinement and updating of existing archaeomagnetic databases will help considerably the elaboration of the newest geomagnetic field models. Acknowledgement: A partial financial support is from the Project "The archaeomagnetism - a key for solving fundamental problems in geophysics and archaeology", granted from the Bulgarian National Science Fund.

Holocene vegetation changes through Lac Ledro sediments (Trentino, Italy).

NASA Astrophysics Data System (ADS)

Joannin, Sebastien; Vannière, Boris; Galop, Didier; Magny, Michel; Gilli, Adrian; Chapron, Emmanuel; Wirth, Stéfanie; Anselmetti, Flavio; Desmet, Marc

2010-05-01

Lake Ledro is part of the French program ANR LAMA (coordinators: M. Magny and N. Combourieu Nebout) which aims to link Holocene paleoenvironmental changes along a north-south transect in Italy. Lake Ledro (652 m a.s.l.; Trentino, north-eastern Italy) is the northward component of the transect. It is located on the southern slope of the Alps and its catchment area covers 131 km2 with mountains culminating at 1500-2000 m. A multi-proxy approach based on biotic and abiotic indicators (lake-level, palynology, geochemistry and geophysic) was developed from deep and littoral cores, including sediment sequences in Early and Middle Bronze Age lake-shore archaeological sites. We aim reconstructing paleoenvironmental changes resulting from both climate and anthropic influences trough the entire Holocene. A deep master core was built after extracting twin cores from a non disturbed sediment zone recognised by seismic-reflexion investigations. The age-depth model is based on 13 AMS 14C ages measured on terrestrial plant macrofossils and the mean temporal resolution for analyses is ca 60 years. Palynological study shows the usual vegetation succession for the southern slope of the Alps. During the first part of the Holocene, abrupt changes are observed in pollen assemblages in relation to changes in other proxies (XRF and Magnetic Susceptibility) and correlate with cold events associated to the deglaciation in the North-Atlantic area. Cool episodes corresponding to the PreBoreal Oscillation (ca 11.3 ka cal BP) and 8.2 ka event are respectively characterized by stopping afforestation and a strong development of Abies in the local ecosystem. During the second part of the Holocene, two declines of arboreal pollen abundance are observed in relation with occurrences in both cereal and anthropic pollen indicators. These two phases are confirmed by increase in soil erosion as indicated by abiotic proxies. They give evidence of two successive steps for human settlement (Early-Middle Bronze Age and Iron Age) separated by forest development. In addition, XRF data allow two successive distinct palaeohydrological periods to be recognized into the Holocene. Finally, comparison between littoral and deep cores reinforces our interpretation and helps to disentangle climate and anthropic influences on the Holocene environment in the Central Mediterranean region.

Historic mass movements recorded in the sediments of Hallstätter See (Upper Austria) - natural hazards at a UNESCO World Cultural Heritage Site

NASA Astrophysics Data System (ADS)

Lauterbach, Stefan; Strasser, Michael; Tjallingii, Rik; Spötl, Christoph; Brauer, Achim

2017-04-01

Human activity associated with salt mining in Hallstatt (Upper Austria) can be traced back to the Neolithic and underground salt mining in the area is documented since the Middle Bronze Age. The cultural importance of this salt mining and the wealth of archaeological artefacts - particularly from the epoch of the Early Iron Age, for which Hallstatt became the eponym - has been recognized already 20 years ago by assigning the status of a UNESCO World Cultural Heritage Site to the Hallstatt area. Mining activity is well documented for prehistoric times and known to have been repeatedly affected by large mass movements, destroying mining facilities, for example, at the end of the Bronze Age and during the Late Iron Age. In contrast, evidence of mining activity in the Common Era until the late 13th century AD is scarce, which could be related to socio-economic changes as well as mass movement activity, possibly biasing the archaeological record. Within a project aiming at reconstructing past flood activity of the Traun River, a major tributary of the Danube, a ca. 16-m-long sediment core has been recovered from Hallstätter See. The sediments are continuously cm- to sub-mm-scale laminated, reflecting seasonally variable detrital input by the Traun River and the smaller tributaries. However, an outstanding feature of the sediment record are two meter-scale event layers. The upper one is characterized by a basal mass-transport deposit of 2.50 m thickness, containing folded laminated sediments, homogeneous sediments with liquefaction structures and large stones of up to 4 cm in diameter, which is overlain by a co-genetic turbidite of 1.50 m thickness. From the lower event layer only the topmost part of the turbiditic sequence was recovered, revealing a (minimum) thickness of 1.50 m. Based on their sedimentological characteristics, both event layers are interpreted as the subaqueous continuation of large-scale mass movements, which occurred during the last 2000 years and likely originated from the Plassen Massif where the Hallstatt salt mining area is located. This indicates that past mass movement activity not only threatened prehistoric salt mining, but repeatedly occurred during the Common Era, which could possibly explain the lack of archaeological evidence for mining activity between the Late Iron Age and the late 13th century AD.

Non destructive neutron diffraction measurements of cavities, inhomogeneities, and residual strain in bronzes of Ghiberti's relief from the Gates of Paradise

NASA Astrophysics Data System (ADS)

Festa, G.; Senesi, R.; Alessandroni, M.; Andreani, C.; Vitali, G.; Porcinai, S.; Giusti, A. M.; Materna, T.; Paradowska, A. M.

2011-03-01

Quantitative neutron studies of cultural heritage objects provide access to microscopic, mesoscopic, and macroscopic structures in a nondestructive manner. In this paper we present a neutron diffraction investigation of a Ghiberti Renaissance gilded bronze relief devoted to the measurement of cavities and inhomogeneities in the bulk of the sample, along with the bulk phase composition and residual strain distribution. The quantitative measurements allowed the determination of the re-melting parts extension, as well as improving current knowledge about the manufacturing process. The study provides significant and unique information to conservators and restorators about the history of the relief.

Strengthening of ferrous binder jet 3D printed components through bronze infiltration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cordero, Zachary C.; Siddel, Derek H.; Peter, William H.

Fully-dense, net shape objects have been fabricated from a rapidly-solidified ferrous powder using binder-jet 3D printing and molten bronze infiltration. X-ray diffraction, scanning electron microscopy, and differential thermal analysis were used to characterize the structural evolution of the powder feedstock during an infiltration heating cycle. Microindentation and bend tests were performed on the infiltrated material to evaluate its mechanical properties. The infiltrated material had an 11 GPa hardness and moderate damage tolerance. It was found that infiltration improved both the ductility and strength of the sintered preforms by eliminating the stress concentration at the interparticle necks.

Strengthening of ferrous binder jet 3D printed components through bronze infiltration

DOE PAGES

Cordero, Zachary C.; Siddel, Derek H.; Peter, William H.; ...

2017-04-08

Fully-dense, net shape objects have been fabricated from a rapidly-solidified ferrous powder using binder-jet 3D printing and molten bronze infiltration. X-ray diffraction, scanning electron microscopy, and differential thermal analysis were used to characterize the structural evolution of the powder feedstock during an infiltration heating cycle. Microindentation and bend tests were performed on the infiltrated material to evaluate its mechanical properties. The infiltrated material had an 11 GPa hardness and moderate damage tolerance. It was found that infiltration improved both the ductility and strength of the sintered preforms by eliminating the stress concentration at the interparticle necks.

Erosion of phosphor bronze under cavitation attack in a mineral oil

NASA Technical Reports Server (NTRS)

Rao, B. C. S.; Buckley, D. H.

1986-01-01

Experimental investigations on erosion of a copper alloy, phosphor bronze, under cavitation attack in a viscous mineral oil are presented. The details of pit formation and erosion were studied using scanning electron microscopy. The mean depth of penetration, the variations in surface roughness, and the changes in erosion pit size were studied. Cavitation pits formed initially over the grain boundaries while the surface grains were plastically deformed. Erosion of surface grains occurred largely by ductile fracture involving microcracking and removal in layers. The ratio h/a of the depth h to half width a of cavitation pits increased with test duration from 0.047 to 0.55.

Bronx Zoo cogeneration project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivet, P.H.

The New York Zoological Society commenced feasibility studies for a proposed cogeneration and district heating system for the Bronz Zoo in spring 1982. Early studies focused on evaluating the Zoo's energy loads, infrastructure, and energy delivery and financing systems. The Zoological Society and New York City joined in the decision to support the construction of a system which would serve not only the Bronx Zoo but also five nearby City-funded installations, including the adjacent New York Botanical Garden. Since the submission of that study, the project has been modified in scope, scaling back to a generating capacity designed to servemore » only the Bronz Zoo.« less

Processing and problems in manufacturing a Ti-modified Nb/sub 3/Sn MJR billet. Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, W.K.; Smathers, D.; Geno, J.D.

1985-06-18

This report is submitted to complete Task II of University of California Order Number 4321405. Task I had Teledyne Wah Chang Albany (TWCA) assemble and process by the Modified Jelly Roll (MJR) method a Ti-modified Nb/sub 3/Sn superconductor billet. This billet was identified as M103 by TWCA. The billet matrix is nominally composed of copper 13.5 wt % tin bronze sheet and niobium 1.2 wt % titanium expanded metal with a volume ratio of three parts bronze to one part niobium alloy. All processing steps and problems encountered in manufacturing billet M103 are described in this report.

Invasion of cemeteries in Florida by Aedes albopictus.

PubMed

O'Meara, G F; Gettman, A D; Evans, L F; Scheel, F D

1992-03-01

Aedes albopictus has been found in 53 of the 67 Florida counties. The initial discoveries in 11 of these counties were made in cemeteries. At several locations, Ae. albopictus became well-established in cemeteries before appearing in nearby accumulations of waste tires. The recycling of plastic floral baskets may be aiding the spread of Ae. albopictus. Mosquitoes were commonly found in all types of flower-holding containers in cemeteries, except bronze vases. In the laboratory, most Aedes aegypti eggs laid in bronze vases hatched, but larvae subsequently died. The spread of Ae. albopictus in cemeteries seems to occur at the expense of Ae. aegypti populations. At one cemetery immature Ae. albopictus and Ae. aegypti were found in about 70% of the Aedes-positive containers at the start of a monitoring program. In subsequent collections from this site, Ae. albopictus was found in nearly all Aedes-positive containers, whereas there was a progressive decrease in containers with Ae. aegypti. This trend did not appear to be the result of any seasonal pattern because in a nearby cemetery where Ae. albopictus was absent, Ae. aegypti did not show a similar decline. Limiting flower-holding containers to those with drain holes or to bronze vases would greatly limit mosquito production.

Impacts of air pollution on cultural heritage corrosion at European level: What has been achieved and what are the future scenarios.

PubMed

Di Turo, Francesca; Proietti, Chiara; Screpanti, Augusto; Fornasier, M Francesca; Cionni, Irene; Favero, Gabriele; De Marco, Alessandra

2016-11-01

The interaction of pollutants with Cultural Heritage materials leads to artworks and materials degradation and loss, causing an unpriceless damage. This works aims to estimate the impacts of air pollution and meteorological conditions on limestone, copper and bronze and represents the European risk assessment for corrosion of Cultural Heritage materials. The measures and policies for atmospheric pollution reduction have cut off the SO 2 concentration and consequently its impact on materials is drastically reduced. Indeed, in 1980 the number of UNESCO sites in danger was extremely high (94% for limestone, 54% for copper and 1% for bronze) while in 2010 these sites did not exceed the tolerable value of surface recession and corrosion. However, some problem related to air pollution persists. In particular, Random Forest Analysis (RFA), highlights PM 10 as the main responsible for materials corrosion, in 2010. Two scenarios in 2030 have been tested, highlighting that the corrosion levels of limestone, copper and bronze exceed the tolerable limits only in the Balkan area and Turkey. Our results show the importance in the air quality modelling as a powerful tool for the UNESCO sites conservation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Landscape and zonal features of the formation of producing economy in Russia

NASA Astrophysics Data System (ADS)

Nizovtsev, Vyacheslav; Natalia, Erman

2016-04-01

Based on analysis of the extensive source base, including complex landscape, component, paleogeographic and archeological published and scientific materials as well as the connected analysis of published paleogeographical, paleolandscape and historical and geographic maps of the territory of Russia landscape and zonal features of the transition from appropriating economy to producing economy were determined. All the specifics of historical changes in the landscape use of the vast areas of Russia is caused by the variety of its landscape zones and the specifics of their constituent landscapes. Human economic activities as a factor of differentiation and development of landscapes became apparent almost in all landscape zones together with the emergence of the producing type of economy from the Aeneolithic-Bronze Age (Atlantic period) in the southern steppe regions (in the northern areas of the main centers of the producing economy) and from the Bronze Age in the forest areas. The emergence of the producing economy in the forest-steppe and steppe landscape zones on the territory of Russia is dated IV (Aeneolithic) - III (Early Bronze Age) millennium BC. It is from this period that on the European part of Russia and in Siberia the so-called Neolithic revolution begins. The use of copper and bronze axes helped to develop new areas for planting crops in the forest-steppe zone. In the forest-steppe zone swidden and lea tillage cultivation develops. In the steppe and forest-steppe Eurasia depending on the local landscape conditions two ways of producing economy with a predominance of cattle-breeding developed: nomadic cattle breeding and house cattle breeding with a significant influence of agriculture in the economy and long-term settlements. The steppe areas were completely dominated by the mobile nomadic herding, breeding cattle and small cattle. Along with the valley landscapes the interfluvial landscapes were also actively explored. Almost in all the steppe areas there was a cattle breeding economic and cultural type of producing economy with a simplified system of natural and anthropogenic and anthropogenic landscapes involving a maximum of 4-5 natural and economic systems. In the forest-steppe zone a significant part of the population was settled in the valley landscapes. The basis of the economy was pastoral and house cattle breeding with a predominance of beef cattle and pigs and hoe-mattock agriculture, which was only possible in the floodplain landscape complexes. In the areas of permanent settlements long grazing in one place led to the complete destruction of vegetation. The forced reduction of the agricultural land areas led to significant ecologic crisis. In the forest zone, along with hunters, fishermen and gatherers there appear the first tribes, who already engaged in the forest cattle breeding. First, they raised pigs and then small and beef cattle, while hunting and fishing were of subordinate nature. Pastures were situated mainly in floodplains and lakeside lowlands which had more open spaces. It is the extensive economy of that time that can be associated with the deforestation of flood plains of rivers and lakes and the emergence of meadows. There arises a natural-economic system with floodplain cattle-breeding (agricultural geo-systems of pasture type with floodplain meadows and woodlands), which existed for a long time. In all landscape zones the character of the relationship between men and the landscape was determined by the nature of producing activity, as well as natural features of "accommodating" landscape. The formation of nature use systems and settlement patterns strictly depend on the local landscape structure. In all earlier historical periods in similar landscape (zonal) conditions the settlers had the same type of economy, thus forming the same types of natural and economic systems and similar anthropogenically transformed landscapes. The dramatic change in the nature use occurs with the settlement in the forest and steppe zones of the Iron Age tribes, which had a complex cattle-breeding and agricultural economy. Irreversible changes captured many of the components, including soils and lithogenic basis, of the landscapes. In the morphological structure of the landscapes there appear new permanent stable elements of anthropogenic origin: residential and arable, many of which have survived to this day. The work is performed under the project of Russian Foundation for Basic Research № 14-05-00618

The beginnings of human palaeontology: prehistory, craniometry and the 'fossil human races'.

PubMed

Goodrum, Matthew R

2016-09-01

Since the nineteenth century, hominid palaeontology has offered critical information about prehistoric humans and evidence for human evolution. Human fossils discovered at a time when there was growing agreement that humans existed during the Ice Age became especially significant but also controversial. This paper argues that the techniques used to study human fossils from the 1850s to the 1870s and the way that these specimens were interpreted owed much to the anthropological examination of Stone, Bronze, and Iron Age skeletons retrieved by archaeologists from prehistoric tombs throughout Europe. What emerged was the idea that a succession of distinct human races, which were identified using techniques such as craniometry, had occupied and migrated into Europe beginning in the Ice Age and continuing into the historic period. This marks a phase in the history of human palaeontology that gradually gave way to a science of palaeoanthropology that viewed hominid fossils more from the perspective of evolutionary theory and hominid phylogeny.

A possible "grinder" from Tell Arbid, Syria.

PubMed

Pitre, Mindy C; Koliński, Rafał; Sołtysiak, Arkadiusz

2017-12-01

Cereal grinding has been practiced in Mesopotamia since the Upper Palaeolithic. While evidence of cereal grinding is clear from the archaeological and textual records, what remains unclear is whether the activity leaves signs on the skeleton in the form of markers of occupational stress (MOS). A particular constellation of MOS (e.g., osteoarthritis, traumatic injuries, and accessory articular facets) has previously been used to infer the habitual grinding of grain. These same MOS were recently observed in the skeleton of a female discovered in the Middle Bronze Age cemetery at Tell Arbid, NE Syria. Through differential diagnosis our results suggest that it remains problematic to identify grain-processing activities from the skeleton, even when a bioarchaeological approach is carried out.

Documenting Bronze Age Akrotiri on Thera Using Laser Scanning, Image-Based Modelling and Geophysical Prospection

NASA Astrophysics Data System (ADS)

Trinks, I.; Wallner, M.; Kucera, M.; Verhoeven, G.; Torrejón Valdelomar, J.; Löcker, K.; Nau, E.; Sevara, C.; Aldrian, L.; Neubauer, E.; Klein, M.

2017-02-01

The excavated architecture of the exceptional prehistoric site of Akrotiri on the Greek island of Thera/Santorini is endangered by gradual decay, damage due to accidents, and seismic shocks, being located on an active volcano in an earthquake-prone area. Therefore, in 2013 and 2014 a digital documentation project has been conducted with support of the National Geographic Society in order to generate a detailed digital model of Akrotiri's architecture using terrestrial laser scanning and image-based modeling. Additionally, non-invasive geophysical prospection has been tested in order to investigate its potential to explore and map yet buried archaeological remains. This article describes the project and the generated results.

Thermoluminescence dating of archaeological artefacts from the Middle Neolithic, Bronze Age and the Roman Empire period.

PubMed

Berger, T; Hajek, M; Primerano, W; Vana, N

2002-01-01

Thermoluminescence (TL) dating was applied for artefacts found near the small village of Michelstetten, Lower Austria. Settlements in this region can be traced hack a long time and, according to archaeologists, the discovered artefacts may be as old as 6000 years. A modified sample preparation technique based on the fine-grain method was developed. This technique results in a higher reproducibility and reduces the overall preparation time. For some artefacts the new information of the TL dating leads to an unforeseen re-interpretation of the archaeological age. Furthermore, an iron furnace from the period of the Roman Empire could be dated. For the first time, it was possible to estimate correctly the point of time of the burn-down of an ancient wooden house via an analysis of the house's clay plaster. The fire took place in the sixth century; this was confirmed by dating ceramic artefacts.

Pigment phenotype and biogeographical ancestry from ancient skeletal remains: inferences from multiplexed autosomal SNP analysis.

PubMed

Bouakaze, Caroline; Keyser, Christine; Crubézy, Eric; Montagnon, Daniel; Ludes, Bertrand

2009-07-01

In the present study, a multiplexed genotyping assay for ten single nucleotide polymorphisms (SNPs) located within six pigmentation candidate genes was developed on modern biological samples and applied to DNA retrieved from 25 archeological human remains from southern central Siberia dating from the Bronze and Iron Ages. SNP genotyping was successful for the majority of ancient samples and revealed that most probably had typical European pigment features, i.e., blue or green eye color, light hair color and skin type, and were likely of European individual ancestry. To our knowledge, this study reports for the first time the multiplexed typing of autosomal SNPs on aged and degraded DNA. By providing valuable information on pigment traits of an individual and allowing individual biogeographical ancestry estimation, autosomal SNP typing can improve ancient DNA studies and aid human identification in some forensic casework situations when used to complement conventional molecular markers.

Geoarchaeological evidence for dredging in Tyre's ancient harbour, Levant

NASA Astrophysics Data System (ADS)

Marriner, Nick; Morhange, Christophe

2006-01-01

Chrono-stratigraphic data from Tyre's ancient northern harbour delineate extensive dredging practices during the Greco-Roman and Byzantine periods. Radiocarbon dates from four cores consistently cluster between ca. 500 B.C. and 1000 A.D. and indicate rapid rates of sedimentation in the basin, namely ∼10 mm/yr during the Greco-Roman and Byzantine periods, compared to 0.5-1 mm/yr for the period 6000-4000 B.C. Absence of strata between 4000 B.C. and 500 B.C. is not consistent with a natural base-level sediment sink and cannot be interpreted as a depositional hiatus in the high-stand systems tract. Ancient dredging is further corroborated by persistent age-depth inversions within the fine-grained harbour facies. These data support removal of Middle Bronze Age to Persian period sediment strata, with deliberate overdeepening of the harbour bottom by Greco-Roman and Byzantine societies.

Ice-borne prehistoric finds in the Swiss Alps reflect Holocene glacier fluctuations

NASA Astrophysics Data System (ADS)

Grosjean, Martin; Suter, Peter J.; Trachsel, Mathias; Wanner, Heinz

2007-03-01

During the hot summer of 2003, reduction of an ice field in the Swiss Alps (Schnidejoch) uncovered spectacular archaeological hunting gear, fur, leather and woollen clothing and tools from four distinct windows of time: Neolithic Age (4900 to 4450 cal. yr BP), early Bronze Age (4100-3650 cal. yr BP), Roman Age (1st-3rd century AD), and Medieval times (8-9th century AD and 14-15th century AD). Transalpine routes connecting northern Italy with the northern Alps during these slots is consistent with late Holocene maximum glacier retreat. The age cohorts of the artefacts are separated which is indicative of glacier advances when the route was difficult and not used for transit. The preservation of Neolithic leather indicates permanent ice cover at that site from ca. 4900 cal. yr BP until AD 2003, implying that the ice cover was smaller in 2003 than at any time during the last 5000 years. Current glacier retreat is unprecedented since at least that time. This is highly significant regarding the interpretation of the recent warming and the rapid loss of ice in the Alps. Copyright

The Influence of Pseudomonas fluorescens on Corrosion Products of Archaeological Tin-Bronze Analogues

NASA Astrophysics Data System (ADS)

Ghiara, G.; Grande, C.; Ferrando, S.; Piccardo, P.

2018-01-01

In this study, tin-bronze analogues of archaeological objects were investigated in the presence of an aerobic Pseudomonas fluorescens strain in a solution, containing chlorides, sulfates, carbonates and nitrates according to a previous archaeological characterization. Classical fixation protocols were employed in order to verify the attachment capacity of such bacteria. In addition, classical metallurgical analytical techniques were used to detect the effect of bacteria on the formation of uncommon corrosion products in such an environment. Results indicate quite a good attachment capacity of the bacteria to the metallic surface and the formation of the uncommon corrosion products sulfates and sulfides is probably connected to the bacterial metabolism.

PULSED EDDY CURRENT THICKNESS MEASUREMENT OF SELECTIVE PHASE CORROSION ON NICKEL ALUMINUM BRONZE VALVES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krause, T. W.; Harlley, D.; Babbar, V. K.

Nickel Aluminum Bronze (NAB) is a material with marine environment applications that under certain conditions can undergo selective phase corrosion (SPC). SPC involves the removal of minority elements while leaving behind a copper matrix. Pulsed eddy current (PEC) was evaluated for determination of SPC thickness on a NAB valve section with access from the surface corroded side. A primarily linear response of PEC amplitude, up to the maximum available SPC thickness of 4 mm was observed. The combination of reduced conductivity and permeability in the SPC phase relative to the base NAB was used to explain the observed sensitivity ofmore » PEC to SPC thickness variations.« less

Classification of Corrosion Defects in NiAl Bronze Through Image Analysis

DTIC Science & Technology

2010-01-01

the sub-band coefficient matrix as: EntropypðkÞ ¼ X i X j jCpk;ði;jÞj 2 log jCpk;ði;jÞj 2 ð2Þ EnergypðkÞ ¼ X i X j jCpk;ði;jÞj 2 ð3Þ where...Wharton, R.C. Barik , G. Kear, R.J.K. Wood, K.R. Stokes, F.C. Walsh, The corrosion of nickel–aluminum bronze in seawater, Corros. Sci. 47 (2005) 3336...corrosion under fatigue conditions, J . Aircraft (7–8) (2009) 1253–1259. [10] H.S. Isaacs, Initiation of stress corrosion cracking of sensitized type

Carbon Fiber Composites

NASA Technical Reports Server (NTRS)

1997-01-01

HyComp(R), Inc. development a line of high temperature carbon fiber composite products to solve wear problems in the harsh environment of steel and aluminum mills. WearComp(R), self-lubricating composite wear liners and bushings, combines carbon graphite fibers with a polyimide binder. The binder, in conjunction with the fibers, provides the slippery surface, one that demands no lubrication, yet wears at a very slow rate. WearComp(R) typically lasts six to ten times longer than aluminum bronze. Unlike bronze, WearComp polishes the same surface and imparts a self-lube film for years of service. It is designed for continuous operation at temperatures of 550 degrees Fahrenheit and can operate under high compressive loads.

Deposits of Large-scale Mass Movements in the Sediments of Hallstätter See (Austria) - Recurrent Natural Hazards at a UNESCO World Cultural Heritage Site

NASA Astrophysics Data System (ADS)

Lauterbach, S.; Strasser, M.; Tjallingii, R.; Kowarik, K.; Reschreiter, H.; Spatl, C.; Brauer, A.

2017-12-01

The cultural importance of underground salt mining in Hallstatt (Austria), which is documented since the Middle Bronze Age, has been recognized already 20 years ago by assigning the status of a UNESCO World Cultural Heritage Site to the Hallstatt area, particularly because of the wealth of archaeological artefacts from the Early Iron Age. Local mining activity is well documented for prehistoric times and known to have been repeatedly affected by large-scale mass movements, for example at the end of the Bronze Age and during the Late Iron Age. In contrast, evidence of mining activity between the 5th and late 13th century AD is scarce, which could be related to socio-economic changes but also to continued mass movement activity, possibly biasing the archaeological record. Within the present study, a 15.63-m-long 14C-dated sediment core from Hallstätter See has been investigated with respect to the deposits of large-scale mass movements. Most of the lake sediment sequence consists of cm- to sub-mm-scale laminated carbonate mud with frequently intercalated small-scale turbidites, reflecting seasonally variable detrital input from the tributaries, but two major event layers clearly stand out. The upper one comprises a 2.45-m-thick basal mass transport deposit (containing folded laminated sediments, homogenized sediments with liquefaction structures, and coarse gravel) and an overlying 1.45-m-thick co-genetic turbidite. From the lower event layer only the topmost part of the turbiditic sequence with a (minimum) thickness of 1.49 m was recovered. Based on their sedimentological characteristics, both event layers are interpreted as the subaqueous continuation of large-scale mass movements, which occurred at ca. 1050 and 2300 cal. years BP and possibly originated from the rock walls along the western lake shore where also the salt mining area is located. This indicates that mass movement activity not only threatened prehistoric salt mining, but occurred also repeatedly during the Common Era, possibly explaining the lack of archaeological evidence of mining activity between the 5th and late 13th century AD. However, a direct spatial and temporal relationship between documented mass movements in the mining area and those recorded in the lake sediments cannot be proven at present and requires further investigations.

High performance bimorph piezoelectric MEMS harvester via bulk PZT thick films on thin beryllium-bronze substrate

NASA Astrophysics Data System (ADS)

Yi, Zhiran; Yang, Bin; Li, Guimiao; Liu, Jingquan; Chen, Xiang; Wang, Xiaolin; Yang, Chunsheng

2017-07-01

This letter presents a high performance bimorph piezoelectric MEMS harvester with bulk PZT thick films on both sides of a flexible thin beryllium-bronze substrate via bonding and thinning technologies. The upper and lower PZT layers are thinned down to about 53 μm and 76 μm, respectively, and a commercial beryllium bronze with the thickness of about 50 μm is used as the substrate. The effective volume of this device is 30.6 mm3. The harvester with a tungsten proof mass generated the close-circuit peak-to-peak voltage of 53.1 V, the output power of 0.979 mW, and the power density of 31.99 mW/cm3 with the matching load resistance of 360 kΩ at the applied acceleration amplitude of 3.5 g and the applied frequency of 77.2 Hz. Meanwhile, in order to evaluate the stability, the device was measured continuously under applied acceleration amplitudes of 1.0 g and 3.5 g for one hour and demonstrated a good stability. Then, the harvester was utilized to light up LEDs and about twenty-one serial LEDs were lighted up at resonance under an applied acceleration amplitude of 3.0 g.

Composition and microstructure of Roman metallic artefacts of Southwestern Iberian Peninsula

NASA Astrophysics Data System (ADS)

Valério, P.; Voráčová, E.; Silva, R. J. C.; Araújo, M. F.; Soares, A. M. M.; Arruda, A. M.; Pereira, C.

2015-10-01

The Roman invasion introduces new alloys and metallurgical practices in Iberian Peninsula. The southwestern end of this region has many evidences of connections with the Roman World, but there are no studies about the manufacture and use of copper-based artefacts during this period. Therefore, a set of about 20 ornaments, tools and small attachments recovered at the Roman sites of Monte Molião and Cidade das Rosas was studied by an analytical approach combining micro-EDXRF, optical microscopy, SEM-EDS and Vickers microhardness testing. The artefact composition shows a good correlation with function, namely pure copper for nails and rivets, low-tin bronze (2-6 wt% Sn) for basic tools, high-tin bronze (14 wt% Sn) for fibulae and high-lead bronze (19 wt% Pb) for a decorated jug handle. The manufacture also depends on function because most artefacts were subjected to thermomechanical processing, except the ornaments that would not benefit from post-casting work. Brass and gunmetal were only present in the site with a later chronology. A metallurgy visibly ruled by economical, aesthetical and technological concerns reinforces the evidences about the total integration of Southwestern Iberian Peninsula in the Roman World, but further studies will be essential to determine the evolution of copper-based alloys in Lusitania under Roman influence.

Genetic History of Xinjiang's Uyghurs Suggests Bronze Age Multiple-Way Contacts in Eurasia.

PubMed

Feng, Qidi; Lu, Yan; Ni, Xumin; Yuan, Kai; Yang, Yajun; Yang, Xiong; Liu, Chang; Lou, Haiyi; Ning, Zhilin; Wang, Yuchen; Lu, Dongsheng; Zhang, Chao; Zhou, Ying; Shi, Meng; Tian, Lei; Wang, Xiaoji; Zhang, Xi; Li, Jing; Khan, Asifullah; Guan, Yaqun; Tang, Kun; Wang, Sijia; Xu, Shuhua

2017-10-01

The Uyghur people residing in Xinjiang, a territory located in the far west of China and crossed by the Silk Road, are a key ethnic group for understanding the history of human dispersion in Eurasia. Here we assessed the genetic structure and ancestry of 951 Xinjiang's Uyghurs (XJU) representing 14 geographical subpopulations. We observed a southwest and northeast differentiation within XJU, which was likely shaped jointly by the Tianshan Mountains, which traverses from east to west as a natural barrier, and gene flow from both east and west directions. In XJU, we identified four major ancestral components that were potentially derived from two earlier admixed groups: one from the West, harboring European (25-37%) and South Asian ancestries (12-20%), and the other from the East, with Siberian (15-17%) and East Asian (29-47%) ancestries. By using a newly developed method, MultiWaver, the complex admixture history of XJU was modeled as a two-wave admixture. An ancient wave was dated back to ∼3,750 years ago (ya), which is much earlier than that estimated by previous studies, but fits within the range of dating of mummies that exhibited European features that were discovered in the Tarim basin, which is situated in southern Xinjiang (4,000-2,000 ya); a more recent wave occurred around 750 ya, which is in agreement with the estimate from a recent study using other methods. We unveiled a more complex scenario of ancestral origins and admixture history in XJU than previously reported, which further suggests Bronze Age massive migrations in Eurasia and East-West contacts across the Silk Road. © The Author 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

New Perspectives on the Origin of Korean Acupuncture: Based on Materials from Xiaoyingzi Tomb, Yanji and Neighbouring Region.

PubMed

Kang, In Uk; Cha, Wung Seok

2017-12-01

This article discusses the development of early acupuncture needles as demonstrated by the artifacts excavated from the Northern part of the Yanji district, Jilin, China, during the Japanese colonial era (reported in 1941). Numerous bone needles, stone needles, and other medical devices were found in the Xiaoyingzi excavation. The stone needles from Xiaoyingzi can be categorized into three grades, based on length, of 8cm, 12-15cm, and 18cm. A set of round stones for massage were also discovered, along with obsidian blades. These relics were carefully stored in the middle of the body in the stone coffin. In addition to Xiaoyingzi, stone needles were also excavated along the lower valley region of the Tuman (Tumen, ) River. These facts indicate that the owner was involved in medical practice, and that medical procedures using stone needles were quite popular at the time. This article carefully investigates that the relics have nothing to do with weaving textile or military use. Current research on the origin of acupuncture has been confined either to stone needles from the prehistoric age or to bronze needles, as well as to literature from the Warring States period to the Han China, during which acupuncture technology was considerably expanded. However, substantial knowledge on the "gap" between stone needles and metal needles has been procured through the analysis of Xiaoyingzi, Yanji. The findings of Xiaoyingzi are also significant in providing a more detailed reconstruction of the development of acupuncture in East Asia and emergence of acupuncture throughout history. A large amount of medical items (stone and bone needles, cases for needles, massage stone type bianshi, and etc.), have been excavated from Xiaoyingzi and other neighbouring sites, Along with geographic and ecological factors, this archeological data strongly suggests the medical tradition of using acupuncture needles was practiced around Tumen River basin in the Bronze Age (10th century B.C.).

Human management and landscape changes at Palaikastro (Eastern Crete) from the Late Neolithic to the Early Minoan period

NASA Astrophysics Data System (ADS)

Cañellas-Boltà, N.; Riera-Mora, S.; Orengo, H. A.; Livarda, A.; Knappett, C.

2018-03-01

On the east Mediterranean island of Crete, a hierarchical society centred on large palatial complexes emerges during the Bronze Age. The economic basis for this significant social change has long been debated, particularly concerning the role of olive cultivation in the island's agricultural system. With the aim of studying vegetation changes and human management to understand the landscape history from Late Neolithic to Bronze Age, two palaeoenvironmental records have been studied at Kouremenos marsh, near the site of Palaikastro (Eastern Crete). Pollen, NPP and charcoal particles analyses evidenced seven phases of landscape change, resulting from different agricultural and pastoral practices and the use of fire probably to manage vegetation. Moreover, the Kouremenos records show the importance of the olive tree in the area. They reflect a clear trend for its increasing use and exploitation from 3600 cal yr BC (Final Neolithic) to the Early Minoan period, that is coeval with an opening of the landscape. The increase of Olea pollen was due to the expansion of the tree and its management using pruning and mechanical cleaning. The onset of olive expansion at c. 3600 cal yr BC places Crete among the first locales in the eastern Mediterranean in the management of this tree. Between c. 2780 and 2525 cal yr BC the landscape was largely occupied by olive and grasslands, coinciding with an increase in grazing practices. The high Olea pollen percentages (40-45%) suggest an intensive and large-scale exploitation of the olive tree. The results suggest that a complex and organized landscape with complementary land uses and activities was already in place since the Final Neolithic. The notable expansion of olive trees suggests the relevance of olive exploitation in the socio-economic development of Minoan towns of eastern Crete. Other crops, such as cereals and vine, and activities such as grazing have also played an important role in the configuration of the past landscape.

State of microbial communities in paleosols buried under kurgans of the desert-steppe zone in the Middle Bronze Age (27th-26th centuries BC) in relation to the dynamics of climate humidity

NASA Astrophysics Data System (ADS)

Khomutova, T. E.; Demkina, T. S.; Borisov, A. V.; Shishlina, I. I.

2017-02-01

The size and structure of microbial pool in light chestnut paleosols and paleosolonetz buried under kurgans of the Middle Bronze Age 4600-4500 years ago (the burial mound heights are 45-173 cm), as well as in recent analogues in the desert-steppe zone (Western Ergeni, Salo-Manych Ridge), have been studied. In paleosol profiles, the living microbial biomass estimated from the content of phospholipids varies from 35 to 258% of the present-day value; the active biomass (responsive to glucose addition) in paleosols is 1‒3 orders of magnitude lower than in recent analogues. The content of soil phospholipids is recalculated to that of microbial carbon, and its share in the total soil organic carbon is determined: it is 4.5-7.0% in recent soils and up to three times higher in the remained organic carbon of paleosols. The stability of microbial communities in the B1 horizon of paleosols is 1.3-2.2 times higher than in the upper horizon; in recent soils, it has a tendency to a decrease. The share of microorganisms feeding on plant residues in the ecological-trophic structure of paleosol microbial communities is higher by 23-35% and their index of oligotrophy is 3-5 times lower than in recent analogues. The size of microbial pool and its structure indicate a significantly higher input of plant residues into soils 4600-4500 years ago than in the recent time, which is related to the increase in atmospheric humidity in the studied zone. However, the occurrence depths of salt accumulations in profiles of the studied soils contradict this supposition. A short-term trend of increase in climate humidity is supposed, as indicated by microbial parameters (the most sensitive soil characteristics) or changes in the annual variation of precipitation (its increase in the warm season) during the construction of the mounds under study.

Y-chromosome phylogeographic analysis of the Greek-Cypriot population reveals elements consistent with Neolithic and Bronze Age settlements.

PubMed

Voskarides, Konstantinos; Mazières, Stéphane; Hadjipanagi, Despina; Di Cristofaro, Julie; Ignatiou, Anastasia; Stefanou, Charalambos; King, Roy J; Underhill, Peter A; Chiaroni, Jacques; Deltas, Constantinos

2016-01-01

The archeological record indicates that the permanent settlement of Cyprus began with pioneering agriculturalists circa 11,000 years before present, (ca. 11,000 y BP). Subsequent colonization events followed, some recognized regionally. Here, we assess the Y-chromosome structure of Cyprus in context to regional populations and correlate it to phases of prehistoric colonization. Analysis of haplotypes from 574 samples showed that island-wide substructure was barely significant in a spatial analysis of molecular variance (SAMOVA). However, analyses of molecular variance (AMOVA) of haplogroups using 92 binary markers genotyped in 629 Cypriots revealed that the proportion of variance among the districts was irregularly distributed. Principal component analysis (PCA) revealed potential genetic associations of Greek-Cypriots with neighbor populations. Contrasting haplogroups in the PCA were used as surrogates of parental populations. Admixture analyses suggested that the majority of G2a-P15 and R1b-M269 components were contributed by Anatolia and Levant sources, respectively, while Greece Balkans supplied the majority of E-V13 and J2a-M67. Haplotype-based expansion times were at historical levels suggestive of recent demography. Analyses of Cypriot haplogroup data are consistent with two stages of prehistoric settlement. E-V13 and E-M34 are widespread, and PCA suggests sourcing them to the Balkans and Levant/Anatolia, respectively. The persistent pre-Greek component is represented by elements of G2-U5(xL30) haplogroups: U5*, PF3147, and L293. J2b-M205 may contribute also to the pre-Greek strata. The majority of R1b-Z2105 lineages occur in both the westernmost and easternmost districts. Distinctively, sub-haplogroup R1b- M589 occurs only in the east. The absence of R1b- M589 lineages in Crete and the Balkans and the presence in Asia Minor are compatible with Late Bronze Age influences from Anatolia rather than from Mycenaean Greeks.

Evolution of microstructure and grain boundary character distribution of a tin bronze annealed at different temperatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Weijiu; Chongqing Municipal Key Laboratory of Institutions of Higher Education for Mould Technology, Chongqing University of Technology, Chongqing 400054; Chai, Linjiang, E-mail: chailinjiang@cqut.edu.cn

2016-04-15

Specimens cut from a rolled tin bronze sheet were annealed at 400–800 °C for 1 h and evolution of their microstructures was then characterized in details by electron channeling contrast imaging and electron backscatter diffraction techniques. Particularly, statistics on special boundaries (SBs) with Σ ≤ 29 and network connectivity of random high angle boundaries (HABs) in the annealed specimens were examined to probe optimization potentials of grain boundary character distribution (GBCD) for this material. Results show that the deformed microstructure in the as-received material begins to be recrystallized when the annealing temperature increase to 500 °C and average grain sizesmore » surge with further increasing temperatures. As a result of the recrystallization, a large number of annealing twins (with Σ3 misorientation) are produced, leading to remarkably increased fractions of SBs (f{sub SBs}). Thanks to preexisting dense low angle boundaries, the majority of SBs in the 500 °C specimen with only partial recrystallization are Σ3{sub ic} (incoherent) boundaries, which effectively disrupt connectivity of random HABs network. Although the f{sub SBs} can be further increased (up to 72.5%) in specimens with full recrystallization (at higher temperatures), the Σ3{sub ic} boundaries would be replaced to some extent by Σ3{sub c} (coherent) boundaries which do not contribute directly to optimizing the GBCD. This work should be able to provide clear suggestions on applying the concept of grain boundary engineering to tin bronze alloys. - Highlights: • The rolled tin bronze begins to be recrystallized as temperature increases to 500 °C. • A lot of SBs are produced after recrystallization and the highest f{sub SBs} is 72.5%. • Partially recrystallized specimen has the optimum GBCD due to more Σ3{sub ic} boundaries. • The Σ3{sub ic} boundaries are replaced by Σ3{sub c} boundaries after full recrystallization.« less

Evaluation of transfer films of Salox M on 440C for HPOTP bearing cage applications, task 119

NASA Technical Reports Server (NTRS)

Barber, S. A.; Kannel, J. W.; Dufrane, K. F.

1986-01-01

The objective of the task was to evaluate the suitability of a bronze-filled polytetra fluoroethylene (Salox M) as the cage material in Space Shuttle Main Engine (SSME) high pressure oxygen turbo pump (HPOTP) bearings. The role of the cage pocket material will be to provide a transferred lubricating interface at the ball-race contact region. A series of experiments was conducted which involved block-on-ring tests (the block was the polytetrafluoroethylene (PTFE) -filled material and the ring was through-hardened 440C steel) and high speed traction tests of two 440C disks with one disk rubbed with a PTFE block to generate a transfer film. Measurements included post test visual observations of the condition of the 440C, wear rate measurements of the blocks, and traction measurements between the disks. It was observed that both Salox M and glass-filled PTFE (Armalon) transferred PTFE to 440C at cryogenic temperatures. Bronze is also transferred to uncoated 440C from the Salox M. At room temperature no PTFE transfer was observed in the high speed disk tests due to severe frictional heating, although bronze transfer still occurred with the bronze-PTFE Salox M material. Since the bearing will operate at cryogenic temperature, transfer films are very probable. Salox M wore slightly, although probably tolerably, more than glass-filled PTFE against 440C. However, Salox M is clearly less abrasive to 440C than is the glass-filled material. When the surface layer of PTFE is depleted from the glass-filled material, the glass fibers tend to seriously abrade the steel. This problem does not occur with Salox M. The surface roughness studies indicate that smooth balls are quite reasonable for transfer films. No significant difference in wear rates of the candidate cage materials was observed when the 440C surface finish was increased from 0.025 micron to 0.1 micron cla. At higher levels of roughness, the wear rate increased. Two surface coatings (MoS2 and TiN) were tested. The surface coatings tended to reduce the Salox M wear rate and reduce bronze transfer. PTFE transfer at cryogenic temperatures still occurred with the surface coatings. Two cage design concepts are presented utilizing Salox M material. One design involves a metal-reinforced Salox M cage, while the second design uses Salox M inserts in a metal structure.

An Exhibit for Touching.

ERIC Educational Resources Information Center

Hunt, Susan

1979-01-01

An exhibit designed for visually handicapped persons presented by the Kalamazoo (Michigan) Institute of Art included bronze sculptures and oil paintings from the institute's permanent collection. (CL)

Program to develop sprayed, plastically deformable compressor shroud seal materials

NASA Technical Reports Server (NTRS)

Schell, J. D.; Schell, J. D.

1980-01-01

A study of fundamental rub behavior for 10 dense, sprayed materials and eight current compressor clearance materials was conducted. A literature survey of a wide variety of metallurgical and thermophysical properties was conducted and correlated to rub behavior. Based on the results, the most promising dense rub material was Cu-9A1. Additional studies on the effects of porosity, incursion rate, blade solidity, and ambient temperature were carried out on aluminum bronze (Cu-9Al-1Fe) with and without a 515B Feltmetal underlayer. A further development effort was conducted to assess the property requirements of a porous, aluminum bronze, seal material. Strength, thermal cycle capabilities, erosion and oxidation resistance, machinability, and abradability at several porosity levels were examined.

Thin wire pointing method

NASA Technical Reports Server (NTRS)

Green, G.; Mattauch, R. J. (Inventor)

1983-01-01

A method is described for forming sharp tips on thin wires, in particular phosphor bronze wires of diameters such as one-thousandth inch used to contact micron size Schottky barrier diodes, which enables close control of tip shape and which avoids the use of highly toxic solutions. The method includes dipping an end of a phosphor bronze wire into a dilute solution of sulfamic acid and applying a current through the wire to electrochemically etch it. The humidity in the room is controlled to a level of less than 50%, and the voltage applied between the wire and another electrode in the solutions is a half wave rectified voltage. The current through the wire is monitored, and the process is stopped when the current falls to a predetermined low level.

Pressure dependence of the Peierls transition in the quasi two-dimensional purple bronze KMo 6O 17

NASA Astrophysics Data System (ADS)

Rötger, A.; Beille, J.; Laurant, J. M.; Schlenker, C.

1993-09-01

The electrical resistivity and the lattice parameters have been studied as a function of pressure on the quasi-twodimensional purple bronze KMo 6O 17 which shows a Peierls transition towards a commensurate charge density wave state. The Peierls temperature is found to be first slightly decreased for pressures smaller than 6 kbar, then strongly increased above. This increase is associated to an anomalous contraction of the lattice parameters in the plane of the layers. The corresponding large increase of the compressibility above 16 kbar at 300 K is associated to the pretransitional regime of the Peierls transition as a function of pressure. These results are attributed mainly to an improved nesting of the Fermi surface under pressure.

Experimental Permeability Measurements on a Strut-Supported Transpiration-Cooled Turbine Blade with Stainless-Steel Shell made by the Federal-Mogul Corporation under Bureau of Aeronautics Contract N0as 51613-C

NASA Technical Reports Server (NTRS)

Richards, Hadley T.

1954-01-01

A turbine blade with a porous stainless-steel shell sintered to a supporting steel strut has been fabricated for tests at the NACA by Federal-Mogul Corporation under contract from the Bureau of Aeronautics, Department of the Navy. The apparent permeability of this blade, on the average, more nearly approaches the values specified by the NAGA than did two strut-supported bronze blades in a previous investigation. Random variations of permeability in the present blade are substantialy greater than those of the bronze blades, but projected improvements in certain phases of the fabrication process are expected to reduce these variations.

Human evolution: a tale from ancient genomes

PubMed Central

2017-01-01

The field of human ancient DNA (aDNA) has moved from mitochondrial sequencing that suffered from contamination and provided limited biological insights, to become a fully genomic discipline that is changing our conception of human history. Recent successes include the sequencing of extinct hominins, and true population genomic studies of Bronze Age populations. Among the emerging areas of aDNA research, the analysis of past epigenomes is set to provide more new insights into human adaptation and disease susceptibility through time. Starting as a mere curiosity, ancient human genetics has become a major player in the understanding of our evolutionary history. This article is part of the themed issue ‘Evo-devo in the genomics era, and the origins of morphological diversity’. PMID:27994125

Direct evidence for positive selection of skin, hair, and eye pigmentation in Europeans during the last 5,000 y.

PubMed

Wilde, Sandra; Timpson, Adrian; Kirsanow, Karola; Kaiser, Elke; Kayser, Manfred; Unterländer, Martina; Hollfelder, Nina; Potekhina, Inna D; Schier, Wolfram; Thomas, Mark G; Burger, Joachim

2014-04-01

Pigmentation is a polygenic trait encompassing some of the most visible phenotypic variation observed in humans. Here we present direct estimates of selection acting on functional alleles in three key genes known to be involved in human pigmentation pathways--HERC2, SLC45A2, and TYR--using allele frequency estimates from Eneolithic, Bronze Age, and modern Eastern European samples and forward simulations. Neutrality was overwhelmingly rejected for all alleles studied, with point estimates of selection ranging from around 2-10% per generation. Our results provide direct evidence that strong selection favoring lighter skin, hair, and eye pigmentation has been operating in European populations over the last 5,000 y.

Reconstruction of settlement phases at Intermediate Bronze Age structures in the Negev Highlands (Israel) using luminescence dating

NASA Astrophysics Data System (ADS)

Junge, Andrea; Lomax, Johanna; Shahack-Gross, Ruth; Dunseth, Zachary C.; Finkelstein, Israel; Fuchs, Markus

2016-04-01

OSL dating is usually applied to sediments in paleoenvironmental sciences. However, there is only limited experience with determining the age of archaeological stone structures by OSL using dust deposits associated with these structures. The age of trapped dust deposits may be used to date the onset of settlement (sediment below structures), settlement activity (occupation layer), or the time after settlement (sediment between collapsed walls and roofs). In this study, OSL dating is applied for establishing a chronology of settlement structures situated in the Negev Highlands, Israel. Two archaeological sites are investigated to identify the occupation history, by dating the aeolian dust trapped within the remains of ancient buildings. OSL dating techniques are applied using coarse grain quartz and a standard SAR protocol. First results indicate that the luminescence properties of the trapped sediments are suitable for OSL dating. Therefore, it was possible to date the onset of sedimentation in a later phase of the human occupation or shortly after the settlement was abandoned, which is supported by archaeological evidence gained from pottery finds and the architecture of the buildings.

[Radiological anatomical examinations in skulls from anthropological collections (author's transl)].

PubMed

Wicke, L

1976-01-01

A total of 114 skulls dating from the Neolithic Age, the Bronze Age and the Iron Age, of Incas and Red Indians, of Asians from North and South China, as well as Negro skulls found in Turkey were radiologically analysed and compared with control skulls of recent origin. The 3 standard X-ray views were taken (postero-anterior, axial and lateral) and appropriate linear and angle measurements were carried out. The resultant 4120 values were compared by variance analysis and the differences between the groups are presented. The differences in linear values may be attributable merely to racial variation; the constancy of the obtained angle measurements is striking. The results were also compared by means of linear regression with measured volume values of the brain skull; it was thereby possible to develop a new formula by means of which the volume of the brain skull can be calculated from the parameter BPH (introduced by the author) and from the distance B with the help of a constant factor. The importance of Radiology in Anthropology is pointed out.

Charge Density Waves and the Hidden Nesting of Purple Bronze KMo6O17

NASA Astrophysics Data System (ADS)

Su, Lei; Pereira, Vitor

The layered purple bronze KMo6O17, with its robust triple CDW phase up to high temperatures, became the emblematic example of the ''hidden nesting'' concept. Recent experiments suggest that, on the surface layers, its CDW phase can be stabilized at much higher temperatures, and with a tenfold increase in the electronic gap in comparison with the bulk. Despite such interesting fermiology and properties, the K and Na purple bronzes remain largely unexplored systems, most particularly so at the theoretical level. We introduce the first multi-orbital effective tight-binding model to describe the effect of electron-electron interactions in this system. Upon fixing all the effective hopping parameters in the normal state against an ab-initio band structure, and with only the overall scale of the interactions as sole adjustable parameter, we find that a self-consistent Hartree-Fock solution reproduces extremely well the experimental behavior of the charge density wave (CDW) order parameter in the full range 0 < T < Tc , as well as the precise reciprocal space locations of the partial gap opening and Fermi arc development. The interaction strengths extracted from fitting to the experimental CDW gap are consistent with those derived from an independent Stoner-type analysis This work was supported by the Singapore National Research Foundation under Grant NRF-CRP6-2010-05.

Charge-density-wave partial gap opening in quasi-2D KMo 6O 17 purple bronze studied by angle resolved photoemission spectroscopy

NASA Astrophysics Data System (ADS)

Valbuena, M. A.; Avila, J.; Pantin, V.; Drouard, S.; Guyot, H.; Asensio, M. C.

2006-05-01

Low dimensional (LD) metallic oxides have been a subject of continuous interest in the last two decades, mainly due to the electronic instabilities that they present at low temperatures. In particular, charge density waves (CDW) instabilities associated with a strong electron-phonon interaction have been found in Molybdenum metallic oxides such as KMo 6O 17 purple bronze. We report an angle resolved photoemission (ARPES) study from room temperature (RT) to T ˜40 K well below the Peierls transition temperature for this material, with CDW transition temperature TCDW ˜120 K. We have focused on photoemission spectra along ΓM high symmetry direction as well as photoemission measurements were taken as a function of temperature at one representative kF point in the Brillouin zone in order to look for the characteristic gap opening after the phase transition. We found out a pseudogap opening and a decrease in the density of states near the Fermi energy, EF, consistent with the partial removal of the nested portions of the Fermi surface (FS) at temperature below the CDW transition. In order to elucidate possible Fermi liquid (FL) or non-Fermi liquid (NFL) behaviour we have compared the ARPES data with that one reported on quasi-1D K 0.3MoO 3 blue bronze.

Ferroelectric tungsten bronze bulk crystals and epitaxial thin films for electro-optic device applications

NASA Astrophysics Data System (ADS)

Neurgaonkar, R. R.; Cross, L. E.

1984-02-01

SBN:50 and SBN:60 crystals have now been grown with improved optical quality using the Czochralski technique with automatic diameter control. The liquid phase epitaxial (LPE) growth of SBN:50 on SBN substrates has also been successfully demonstrated, with particularly good results for (100) and (110) film orientations. Electro-optic measurements on SBN:60 single crystals have shown a high value for r51 of 80 x 10 to the minus 12th power m/v, nearly a factor a 2 greater than for SBN:75. The tungsten bronze system Pb1-xBaxNb2O6 (PBN) has shown enhanced piezoelectric, dielectric and optical properties near the morphotropic boundary at x = 0.37. Substantial data on the physical properties of PBN single crystals is presented as a function of composition. Work on an appropriate flux system for LPE growth of PBN is in progress, with particular focus on the system Pb2V2O7 - PBN:60. Systematic work on the tungsten bronze system Ba2NaNb5O15 Sr2NaNb5O15 (BNN-SNN) and Pb2KNb5O15 - Ba2NaNb5O15 (PKN-BNN) has been undertaken, with both systems showing morphotropic boundary conditions with enhanced dielectric properties. Both systems look promising for future electro-optic development.

46 CFR 160.064-3 - Requirements. 1

Code of Federal Regulations, 2011 CFR

2011-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Marine Buoyant Devices § 160.064-3 Requirements. 1 1 The... inherently corrosion-resistant material, such as stainless steel, brass, bronze, certain plastics, etc...

24 CFR 3280.604 - Materials.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Seamless Red Brass Pipe, Standard Sizes—ASTM B43-91. Cast Bronze Threaded Fittings, Classes 125 and 250... Food Waste Disposer Units—ASSE 1008-1986. Performance Requirements for Temperature Activated Mixing...

Wavelength Comparison

NASA Image and Video Library

2016-10-27

The difference in features that are visible in different wavelengths of extreme ultraviolet light can be stunning as we see when we compare very large coronal holes, easily seen in the AIA 171 image (colorized bronze) yet hardly perceptible in the AIA 304 image (colorized red). Both were taken at just about the same time (Oct. 27, 2016). Coronal holes are areas of open magnetic field that carry solar wind out into space. In fact, these holes are currently causing a lot of geomagnetic activity here on Earth. The bronze image wavelength captures material that is much hotter and further up in the corona than the red image. The comparison dramatizes the value of observing the sun in multiple wavelengths of light. Movies are available at http://photojournal.jpl.nasa.gov/catalog/PIA15377

Angular studies of the magnetoresistance in the density wave state of the quasi-two-dimensional purple bronze KMo6O17

NASA Astrophysics Data System (ADS)

Guyot, H.; Dumas, J.; Kartsovnik, M. V.; Marcus, J.; Schlenker, C.; Sheikin, I.; Vignolles, D.

2007-07-01

The purple molybdenum bronze KMo6O17 is a quasi-two-dimensional compound which shows a Peierls transition towards a commensurate metallic charge density wave (CDW) state. High magnetic field measurements have revealed several transitions at low temperature and have provided an unusual phase diagram “temperature-magnetic field”. Angular studies of the interlayer magnetoresistance are now reported. The results suggest that the orbital coupling of the magnetic field to the CDW is the most likely mechanism for the field induced transitions. The angular dependence of the magnetoresistance is discussed on the basis of a warped quasi-cylindrical Fermi surface and provides information on the geometry of the Fermi surface in the low temperature density wave state.

Positron annihilation spectroscopy studies of bronze exposed to sandblasting at different pressure

NASA Astrophysics Data System (ADS)

Kurdyumov, S.; Siemek, K.; Horodek, P.

2017-11-01

An application of Doppler broadening of annihilation line spectroscopy to samples of beryllium bronze DIN-CuBe2 exposed to sandblasting is presented in performed studies. It is familiar that sandblasting introduces open-volume defects. Samples were sandblasted under different pressure for 1 minute using 110 μm particles of Al2O3. For a non-defected sample the constant value of S-parameter was detected. In the cases of sandblasted samples, S-parameter decreased when the depth enhanced. In our studies the thicknesses of defected zones were determined (it was c.a. 30 μm for a sample blasted under pressure of 1 bar and 110 μm - for 5 bar), and it was also observed that if sandblasting pressure is higher the defected zone is larger.

Ancient DNA and Population Turnover in Southern Levantine Pigs- Signature of the Sea Peoples Migration?

PubMed Central

Meiri, Meirav; Huchon, Dorothée; Bar-Oz, Guy; Boaretto, Elisabetta; Horwitz, Liora Kolska; Maeir, Aren M.; Sapir-Hen, Lidar; Larson, Greger; Weiner, Steve; Finkelstein, Israel

2013-01-01

Near Eastern wild boars possess a characteristic DNA signature. Unexpectedly, wild boars from Israel have the DNA sequences of European wild boars and domestic pigs. To understand how this anomaly evolved, we sequenced DNA from ancient and modern pigs from Israel. Pigs from Late Bronze Age (until ca. 1150 BCE) in Israel shared haplotypes of modern and ancient Near Eastern pigs. European haplotypes became dominant only during the Iron Age (ca. 900 BCE). This raises the possibility that European pigs were brought to the region by the Sea Peoples who migrated to the Levant at that time. Then, a complete genetic turnover took place, most likely because of repeated admixture between local and introduced European domestic pigs that went feral. Severe population bottlenecks likely accelerated this process. Introductions by humans have strongly affected the phylogeography of wild animals, and interpretations of phylogeography based on modern DNA alone should be taken with caution. PMID:24186332

Micromorphological aspects of various human activities recorded in the Scafati pedocomplex (Napoli, Italy).

NASA Astrophysics Data System (ADS)

Rellini, Ivano; Vogel, Sebastian; Märker, Michael

2014-05-01

The stratigraphic sequence of Scafati, about 3 km east of ancient Pompeii, is presented consisting of a multilayered sequence of repeated volcanic deposition and pedogenesis that was caused by several phases of volcanic activity and volcanic quiescence of Somma-Vesuvius, at least, the last 20,000 years. Micromorphological analysis were carried out at the soil material and selected volcanic deposits to establish a chronological succession of different phases of volcanic deposition, pedogenetic transformation but also to highlight the anthropogenic influence. The micromorphological analysis testified furrow irrigation and soil cultivation in the medieval stratigraphy and allowed the identification of very significant antropogenic features in the Bronze Age/Iron Age paleosol, i.e. complex depositional crusts and dusty clay coatings and hypocoatings, which are often used as an indicator for tillage activity. In contrast to the clear macroscopic and chemical evidence of ancient soil cultivation, the Roman paleosol did not exhibit distinct micromorphological signs of soil cultivation.

Mashing up metals with carbothermal shock

NASA Astrophysics Data System (ADS)

Skrabalak, Sara E.

2018-03-01

Different materials and the capabilities they enabled have marked the ages of civilization. For example, the malleable copper alloys of the Bronze Age provided harder and more durable tools. Most exploration of new alloys has focused on random alloys, in which the alloying metal sites have no metal preference. In binary and ternary metal systems, dissimilar elements do not mix readily at high concentrations, which has limited alloying studies to intermetallics (ordered multimetallic phases) and random alloys, in which minor components are added to a principal element. In 2004, crystalline metal alloys consisting of five or more principal elements in equal or nearly equal amounts (1, 2) were reported that were stabilized by their high configurational entropy. Unlike most random alloys, the “high-entropy” alloys (3, 4) reside in the centers of their multidimensional phase diagrams (see the figure, right). On page 1489 of this issue, Yao et al. (5) present an innovative and general route to high-entropy alloys that can mix up to eight elements into single-phase, size-controlled nanoparticles (NPs).

Meet our PESP Partners

EPA Pesticide Factsheets

The Pesticide Environmental Stewardship Program is a voluntary membership program that promotes the adoption of innovative, alternative pest control practices such as Integrated Pest Management. PESP has three membership tiers: Bronze, Silver, Gold.

45 CFR 156.400 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., silver, gold, or platinum level of coverage is referred to as a standard bronze plan, a standard silver plan, a standard gold plan, and a standard platinum plan, respectively. Zero cost sharing plan...

Mechanisms and mechanics of shape loss during supersolidus liquid-phase sintering

NASA Astrophysics Data System (ADS)

Lal, Anand

Rapid sinter densification of relatively coarse prealloyed powders is possible by exceeding the solidus temperature in an approach termed supersolidus liquid phase sintering (SLPS). However, narrow processing windows for densification without distortion often limit this process. The liquid films at the grain boundaries that are responsible for densification also reduce the structural rigidity of components. Hence, components tend to slump under their own weight. Thus, the present study investigates shape loss during SLPS and rationalizes the processing and material factors with regard to separating densification from distortion. Experiments are performed on various prealloyed powders, including bronze, 316L stainless steel, and T15 tool steel. Differential thermal analysis, dilatometry, and in situ video imaging of sintering compacts are used to follow melting, densification, and distortion, respectively. Further, density and dimensional measurements are performed on sintered compacts. Results indicate a dependence of distortion on the sintering temperature and time, compact size, and melting behavior of the alloy. It is shown that the sintering temperature window, where high-density, precise components are obtained, can be widened for 316L stainless steel by boron addition. For the first time, a beam bending technique is used to measure the macroscopic apparent viscosity of semisolid bronze. The viscosity drops with temperature above the solidus and lies in the range of 108 to 106 Pa-s. Additionally, the in situ transverse rupture strength of bronze is measured to demonstrate the softening above the solidus temperature. Further, microstructural measurements are performed to enable correlation with the slumping behavior and viscosity. A model combining the deformation mechanisms, driving forces, and microstructural characteristics is developed to predict the conditions for densification and distortion onset. The microstructure is also correlated with the magnitude of shape loss and viscosity of a semisolid aggregate. A mechanistic model, based on the semisolid rheological characteristics, is developed to predict the magnitude and nature of shape loss. The model shows good correlation with experimental data for bronze. This study offers critical insight into SLPS and provides processing strategies for fabrication of high-density components without shape loss.

Molecular analysis of ancient caries

PubMed Central

Simón, Marc; Montiel, Rafael; Smerling, Andrea; Solórzano, Eduvigis; Díaz, Nancy; Álvarez-Sandoval, Brenda A.; Jiménez-Marín, Andrea R.; Malgosa, Assumpció

2014-01-01

An 84 base pair sequence of the Streptococcus mutans virulence factor, known as dextranase, has been obtained from 10 individuals from the Bronze Age to the Modern Era in Europe and from before and after the colonization in America. Modern samples show four polymorphic sites that have not been found in the ancient samples studied so far. The nucleotide and haplotype diversity of this region have increased over time, which could be reflecting the footprint of a population expansion. While this segment has apparently evolved according to neutral evolution, we have been able to detect one site that is under positive selection pressure both in present and past populations. This study is a first step to study the evolution of this microorganism, analysed using direct evidence obtained from ancient remains. PMID:25056622

Development of a new in-air micro-PIXE set-up with in-vacuum charge measurements in Atomki

NASA Astrophysics Data System (ADS)

Török, Zs.; Huszánk, R.; Csedreki, L.; Dani, J.; Szoboszlai, Z.; Kertész, Zs.

2015-11-01

A new external microbeam set-up has recently been installed as the extension of the existing microprobe system at the Laboratory of Ion Beam Applications of Atomki, Debrecen, Hungary. The external beam set-up, based on the system of Oxford Microbeams (OM), is equipped with two X-ray detectors for PIXE analysis, a digital microscope, two alignment lasers and a precision XYZ stage for easy and reproducible positioning of the sample. Exit windows with different thicknesses and of different materials can be used according to the actual demands, currently silicon-nitride (Si3N4) film with 200 nm thickness is employed in our laboratory. The first application was demonstrated in the field of archaeometry, on Bronze Age hoards from Hungary.

TUNGSTEN BRONZE RELATED NON-NOBLE ELECTROCATALYSTS.

DTIC Science & Technology

FUEL CELLS, *CATALYSTS), (*OXYGEN, *ELECTRODES), (* SILICIDES , ELECTRODES), (*CARBIDES, ELECTRODES), (*TUNGSTEN COMPOUNDS, *ELECTROCHEMISTRY...CATALYSTS, TITANIUM COMPOUNDS, ZIRCONIUM COMPOUNDS, VANADIUM COMPOUNDS, NIOBIUM COMPOUNDS, TUNGSTEN COMPOUNDS, TANTALUM COMPOUNDS, MOLYBDENUM COMPOUNDS, SULFURIC ACID, CRYSTAL GROWTH, SODIUM COMPOUNDS

Skin - abnormally dark or light

MedlinePlus

... page: //medlineplus.gov/ency/article/003242.htm Abnormally dark or light skin To use the sharing features ... The bronze color can range from light to dark (in fair-skinned people) with the degree of ...

40 CFR 60.131 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... containing copper as its predominant constituent, and lesser amounts of zinc, tin, lead, or other metals. (b... heat required in the production of refined brass or bronze. (d) Blast furnace means any furnace used to...

40 CFR 60.131 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... containing copper as its predominant constituent, and lesser amounts of zinc, tin, lead, or other metals. (b... heat required in the production of refined brass or bronze. (d) Blast furnace means any furnace used to...

46 CFR 160.044-3 - General requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... free from any defects affecting serviceability. Where a choice of materials is permitted, the materials... pump size No. 3. Discharge outlets shall be provided with a tee of cast bronze or other corrosion...

46 CFR 160.044-3 - General requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... free from any defects affecting serviceability. Where a choice of materials is permitted, the materials... pump size No. 3. Discharge outlets shall be provided with a tee of cast bronze or other corrosion...

46 CFR 160.044-3 - General requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... free from any defects affecting serviceability. Where a choice of materials is permitted, the materials... pump size No. 3. Discharge outlets shall be provided with a tee of cast bronze or other corrosion...

45 CFR 156.20 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Affordable Care Act; and (3) A bronze, silver, gold, or platinum level of coverage as described in section....103 of this subtitle. Level of coverage means one of four standardized actuarial values as defined by...

45 CFR 156.400 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... to the requirements of § 156.130(a). A standard plan at the bronze, silver, gold, or platinum level..., and a standard platinum plan, respectively. Zero cost sharing plan variation means, with respect to a...

46 CFR 195.35-5 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 1014 (incorporated by reference, see § 195.01-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire rope shall be either inherently corrosion-resistant, or made so by galvanizing or...

46 CFR 195.35-5 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 1014 (incorporated by reference, see § 195.01-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire rope shall be either inherently corrosion-resistant, or made so by galvanizing or...

46 CFR 132.365 - Emergency outfits.

Code of Federal Regulations, 2014 CFR

2014-10-01

... belt or a suitable harness. (3) One Type II or Type III flashlight constructed and marked in accordance...) Lifelines must be of steel or bronze wire rope. Steel wire rope must be either inherently corrosion...

Nanocomposites for Electronic Applications

DTIC Science & Technology

1989-09-30

response. In the tungsten bronze structure relaxors a major breakthrough is the clear documentation of spin glass behaviour in an already polar matrix, for...MPB) this behaviour is seen in both ferroelectric tetragonal and orthorhombic species.

Towards novel multiferroic and magnetoelectric materials: dipole stability in tetragonal tungsten bronzes

PubMed Central

Rotaru, Andrei; Miller, Andrew J.; Arnold, Donna C.; Morrison, Finlay D.

2014-01-01

We discuss the strategy for development of novel functional materials with the tetragonal tungsten bronze structure. From the starting composition Ba6GaNb9O30, the effect of A- and B-site substitutions on the dielectric properties is used to develop an understanding of the origin and stability of the dipolar response in these compounds. Both tetragonal strain induced by large B-site cations and local strain variations created by isovalent A-site substitutions enhance dipole stability but result in a dilute, weakly correlated dipolar response and canonical relaxor behaviour. Decreasing cation size at the perovskite A2-site increases the dipolar displacements in the surrounding octahedra, but insufficiently to result in dipole ordering. Mechanisms introducing small A-site lanthanide cations and incorporation of A-site vacancies to induce ferroelectricity and magnetism are presented. PMID:24421377

Wear-triggered self-healing behavior on the surface of nanocrystalline nickel aluminum bronze/Ti3SiC2 composites

NASA Astrophysics Data System (ADS)

Zhai, Wenzheng; Lu, Wenlong; Zhang, Po; Wang, Jian; Liu, Xiaojun; Zhou, Liping

2018-04-01

Self-healing can protect materials from diverse damages, but is intrinsically difficult in metals. This paper demonstrates a potential method through a simultaneous decomposition and oxidation of Ti3SiC2 to achieve healing of stress cracking on the surface of nickel aluminum bronze (NAB)/Ti3SiC2 nanocrystalline composites during fretting wear. At the finest nanocrystalline materials, a crack recovery would be attained at 76.5%. The repetitive fretting wear leads to a modest amount of 'flowability' of Ti3SiC2 toward the crack, facilitating crack recovery. Along with the wear-triggered self-healing, the NAB/Ti3SiC2 shows an improved tribological performance with the stable decreased friction torque due to the formation of lubrication TiO2 oxide.

Differences and discriminatory power of water polo game-related statistics in men in international championships and their relationship with the phase of the competition.

PubMed

Escalante, Yolanda; Saavedra, Jose M; Tella, Victor; Mansilla, Mirella; García-Hermoso, Antonio; Domínguez, Ana M

2013-04-01

The aims of this study were (a) to compare water polo game-related statistics by context (winning and losing teams) and phase (preliminary, classification, and semifinal/bronze medal/gold medal), and (b) identify characteristics that discriminate performances for each phase. The game-related statistics of the 230 men's matches played in World Championships (2007, 2009, and 2011) and European Championships (2008 and 2010) were analyzed. Differences between contexts (winning or losing teams) in each phase (preliminary, classification, and semifinal/bronze medal/gold medal) were determined using the chi-squared statistic, also calculating the effect sizes of the differences. A discriminant analysis was then performed after the sample-splitting method according to context (winning and losing teams) in each of the 3 phases. It was found that the game-related statistics differentiate the winning from the losing teams in each phase of an international championship. The differentiating variables are both offensive and defensive, including action shots, sprints, goalkeeper-blocked shots, and goalkeeper-blocked action shots. However, the number of discriminatory variables decreases as the phase becomes more demanding and the teams become more equally matched. The discriminant analysis showed the game-related statistics to discriminate performance in all phases (preliminary, classificatory, and semifinal/bronze medal/gold medal phase) with high percentages (91, 90, and 73%, respectively). Again, the model selected both defensive and offensive variables.

A genetic chronology for the Indian Subcontinent points to heavily sex-biased dispersals.

PubMed

Silva, Marina; Oliveira, Marisa; Vieira, Daniel; Brandão, Andreia; Rito, Teresa; Pereira, Joana B; Fraser, Ross M; Hudson, Bob; Gandini, Francesca; Edwards, Ceiridwen; Pala, Maria; Koch, John; Wilson, James F; Pereira, Luísa; Richards, Martin B; Soares, Pedro

2017-03-23

India is a patchwork of tribal and non-tribal populations that speak many different languages from various language families. Indo-European, spoken across northern and central India, and also in Pakistan and Bangladesh, has been frequently connected to the so-called "Indo-Aryan invasions" from Central Asia ~3.5 ka and the establishment of the caste system, but the extent of immigration at this time remains extremely controversial. South India, on the other hand, is dominated by Dravidian languages. India displays a high level of endogamy due to its strict social boundaries, and high genetic drift as a result of long-term isolation which, together with a very complex history, makes the genetic study of Indian populations challenging. We have combined a detailed, high-resolution mitogenome analysis with summaries of autosomal data and Y-chromosome lineages to establish a settlement chronology for the Indian Subcontinent. Maternal lineages document the earliest settlement ~55-65 ka (thousand years ago), and major population shifts in the later Pleistocene that explain previous dating discrepancies and neutrality violation. Whilst current genome-wide analyses conflate all dispersals from Southwest and Central Asia, we were able to tease out from the mitogenome data distinct dispersal episodes dating from between the Last Glacial Maximum to the Bronze Age. Moreover, we found an extremely marked sex bias by comparing the different genetic systems. Maternal lineages primarily reflect earlier, pre-Holocene processes, and paternal lineages predominantly episodes within the last 10 ka. In particular, genetic influx from Central Asia in the Bronze Age was strongly male-driven, consistent with the patriarchal, patrilocal and patrilineal social structure attributed to the inferred pastoralist early Indo-European society. This was part of a much wider process of Indo-European expansion, with an ultimate source in the Pontic-Caspian region, which carried closely related Y-chromosome lineages, a smaller fraction of autosomal genome-wide variation and an even smaller fraction of mitogenomes across a vast swathe of Eurasia between 5 and 3.5 ka.

Late Neolithic Mondsee Culture in Austria: living on lakes and living with flood risk?

NASA Astrophysics Data System (ADS)

Swierczynski, T.; Lauterbach, S.; Dulski, P.; Brauer, A.

2013-07-01

Neolithic and Bronze Age lake dwellings in the European Alps became recently protected under the UNESCO World Heritage. However, only little is known about the cultural history of the related pre-historic communities, their adaptation strategies to environmental changes and particularly about the almost synchronous decline of many of these settlements around the transition from the Late Neolithic to the Early Bronze Age. For example, there is an ongoing debate whether the abandonment of Late Neolithic lake dwellings at Lake Mondsee (Upper Austria) was caused by unfavourable climate conditions or a single catastrophic event. Within the varved sediments of Lake Mondsee, we investigated the occurrence of intercalated detrital layers from major floods and debris flows to unravel extreme surface runoff recurrence during the Neolithic settlement period. A combination of detailed sediment microfacies analysis and μXRF element scanning allows distinguishing debris flow and flood deposits. A total of 60 flood and 12 debris flow event layers was detected between 7000 and 4000 varve years (vyr) BP. Compared to the centennial- to millennial-scale average, a period of increased runoff event frequency can be identified between 5900 and 4450 vyr BP. Enhanced flood frequency is accompanied by predominantly siliciclastic sediment supply between ca. 5500 and 5000 vyr BP and enhanced dolomitic sediment supply between 4900 and 4500 vyr BP. A change in the location and the construction technique of the Neolithic lake dwellings at Lake Mondsee can be observed during the period of higher flood frequency. While lake dwellings of the first settlement period (ca. 5800-5250 cal. yr BP) were constructed directly on the wetlands, later constructions (ca. 5400-4700 cal. yr BP) were built on piles upon the water, possibly indicating an adaptation to either increased flood risk or a general increase of the lake level. However, our results also indicate that other than climatic factors (e.g. socio-economic changes) must have influenced the decline of the Mondsee Culture because flood activity generally decreased since 4450 vyr BP, but no new lake dwellings have been established thereafter.

46 CFR 163.002-11 - Materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... hoist must be made of machine cut steel or machine cut bronze, or must be of a design of equivalent... hoist must be a corrosion-resistant wire rope other than galvanized wire rope. (c) Corrosion-resistant...

46 CFR 163.002-11 - Materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... hoist must be made of machine cut steel or machine cut bronze, or must be of a design of equivalent... hoist must be a corrosion-resistant wire rope other than galvanized wire rope. (c) Corrosion-resistant...

46 CFR 77.35-5 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire ropes shall be either... less than 50 feet in length. The assembled lifeline shall have a minimum breaking strength of 1,500...

46 CFR 77.35-5 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

...-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire ropes shall be either... less than 50 feet in length. The assembled lifeline shall have a minimum breaking strength of 1,500...

46 CFR 77.35-5 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

...-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire ropes shall be either... less than 50 feet in length. The assembled lifeline shall have a minimum breaking strength of 1,500...

46 CFR 77.35-5 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

...-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire ropes shall be either... less than 50 feet in length. The assembled lifeline shall have a minimum breaking strength of 1,500...

46 CFR 169.717 - Fireman's outfit.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Inspection; (2) One lifeline with a belt or a suitable harness; (3) One approved flame safety lamp; (4) One... accessible locations. (c) Lifelines must be of steel or bronze wire rope. Steel wire rope must be either...

46 CFR 169.717 - Fireman's outfit.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Inspection; (2) One lifeline with a belt or a suitable harness; (3) One approved flame safety lamp; (4) One... accessible locations. (c) Lifelines must be of steel or bronze wire rope. Steel wire rope must be either...

46 CFR 169.717 - Fireman's outfit.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Inspection; (2) One lifeline with a belt or a suitable harness; (3) One approved flame safety lamp; (4) One... accessible locations. (c) Lifelines must be of steel or bronze wire rope. Steel wire rope must be either...

46 CFR 169.717 - Fireman's outfit.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Inspection; (2) One lifeline with a belt or a suitable harness; (3) One approved flame safety lamp; (4) One... accessible locations. (c) Lifelines must be of steel or bronze wire rope. Steel wire rope must be either...

A follow-up on the analytical study of discolouration of the marble statues of Orsanmichele in Florence.

PubMed

Pinna, Daniela; Galeotti, Monica; Rizzo, Adriana; Cantisani, Emma; Sciutto, Giorgia; Zangheri, Martina; Prati, Silvia; Mazzeo, Rocco; Roda, Aldo

2017-01-01

The research complements the complex study carried out to understand the source of brown discolourations of ten marble statues in the Church of Orsanmichele in Florence, Italy. Originally located in exterior niches, the statues were restored to reverse the extensive alterations they had undergone throughout the centuries. One of the major alterations was the application of a dark brown patina that dated just after 1789. After the statues were placed indoors, brownish discolourations started to appear on their surfaces. Cross sections were examined using FTIR mapping and immunological methods. In parallel, the pyrolysis-gas chromatography/mass spectrometry (py-GC/MS) data already obtained from the statues' scrapings were compared with data from aged casein films applied to microscope glass slides and aged milk-treated marble. All the statues had been treated with milk-based substances before the time the bronze patina was applied. The values of temperature and illumination of the room were important factors in the ageing of organic substances and in the formation of calcium oxalates. It is likely that products of thermo-oxidation and photo-oxidation of the oils together with the oxalates caused the darkening. The marble samples corresponded to a Lunense provenance.

46 CFR 38.15-5 - Cargo hose-TB/ALL.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the cargo are carried on board the vessel, they shall be of flexible metal and fabricated of seamless steel pipe and flexible joints of steel or bronze, or of other suitable material resistant to the action...

46 CFR 38.15-5 - Cargo hose-TB/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the cargo are carried on board the vessel, they shall be of flexible metal and fabricated of seamless steel pipe and flexible joints of steel or bronze, or of other suitable material resistant to the action...

46 CFR 38.15-5 - Cargo hose-TB/ALL.

Code of Federal Regulations, 2014 CFR

2014-10-01

... the cargo are carried on board the vessel, they shall be of flexible metal and fabricated of seamless steel pipe and flexible joints of steel or bronze, or of other suitable material resistant to the action...

46 CFR 38.15-5 - Cargo hose-TB/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the cargo are carried on board the vessel, they shall be of flexible metal and fabricated of seamless steel pipe and flexible joints of steel or bronze, or of other suitable material resistant to the action...

46 CFR 38.15-5 - Cargo hose-TB/ALL.

Code of Federal Regulations, 2013 CFR

2013-10-01

... the cargo are carried on board the vessel, they shall be of flexible metal and fabricated of seamless steel pipe and flexible joints of steel or bronze, or of other suitable material resistant to the action...

Type of Plan and Provider Network (Affordable Care Act)

MedlinePlus

... insurance plan & network types: HMOs, PPOs, and more Health insurance plan & network types: HMOs, PPOs, and more 3 things to know before you pick a health insurance plan The 'metal' categories: Bronze, Silver, Gold & Platinum ...

45 CFR 800.107 - Levels of coverage.

Code of Federal Regulations, 2014 CFR

2014-10-01

... to offer an MSP pursuant to a contract with OPM. (b) Bronze or platinum metal levels of coverage... coverage or the platinum level of coverage, or both, on any Exchange or SHOP in any State. (c) Child-only...

45 CFR 800.107 - Levels of coverage.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to offer an MSP pursuant to a contract with OPM. (b) Bronze or platinum metal levels of coverage... coverage or the platinum level of coverage, or both, on any Exchange or SHOP in any State. (c) Child-only...

46 CFR 96.35-5 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... by reference, see § 96.01-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire... breaking strength of 1,500 pounds. (e) All equipment shall be maintained in an operative condition, and it...

46 CFR 96.35-5 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... by reference, see § 96.01-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire... breaking strength of 1,500 pounds. (e) All equipment shall be maintained in an operative condition, and it...

46 CFR 96.35-5 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... by reference, see § 96.01-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire... breaking strength of 1,500 pounds. (e) All equipment shall be maintained in an operative condition, and it...

46 CFR 96.35-5 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... by reference, see § 96.01-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire... breaking strength of 1,500 pounds. (e) All equipment shall be maintained in an operative condition, and it...

46 CFR 35.30-20 - Emergency equipment-TB/ALL

Code of Federal Regulations, 2012 CFR

2012-10-01

... belt or a suitable harness. (3) One, Type II or Type III, flashlight constructed and marked in... Charge, Marine Inspection. (e) Lifelines shall be of steel or bronze wire rope. Steel wire rope shall be...

46 CFR 35.30-20 - Emergency equipment-TB/ALL

Code of Federal Regulations, 2010 CFR

2010-10-01

... belt or a suitable harness. (3) One, Type II or Type III, flashlight constructed and marked in... Charge, Marine Inspection. (e) Lifelines shall be of steel or bronze wire rope. Steel wire rope shall be...

46 CFR 35.30-20 - Emergency equipment-TB/ALL

Code of Federal Regulations, 2011 CFR

2011-10-01

... belt or a suitable harness. (3) One, Type II or Type III, flashlight constructed and marked in... Charge, Marine Inspection. (e) Lifelines shall be of steel or bronze wire rope. Steel wire rope shall be...

46 CFR 35.30-20 - Emergency equipment-TB/ALL

Code of Federal Regulations, 2014 CFR

2014-10-01

... belt or a suitable harness. (3) One, Type II or Type III, flashlight constructed and marked in... Charge, Marine Inspection. (e) Lifelines shall be of steel or bronze wire rope. Steel wire rope shall be...

46 CFR 35.30-20 - Emergency equipment-TB/ALL

Code of Federal Regulations, 2013 CFR

2013-10-01

... belt or a suitable harness. (3) One, Type II or Type III, flashlight constructed and marked in... Charge, Marine Inspection. (e) Lifelines shall be of steel or bronze wire rope. Steel wire rope shall be...

Production of low-background CuSn6-bronze for the CRESST dark-matter-search experiment.

PubMed

Majorovits, B; Kader, H; Kraus, H; Lossin, A; Pantic, E; Petricca, F; Proebst, F; Seidel, W

2009-01-01

One of the most intriguing open questions in modern particle physics is the nature of the dark matter in our universe. As hypothetical weakly interacting massive particles (WIMPs) do interact with ordinary matter extremely rarely, their observation requires a very low-background detector environment regarding radioactivity as well as an advanced detector technique that allows for active discrimination of the still present radioactive contaminations. The CRESST experiment uses detectors operating at milli-Kelvin temperature. Energy deposition in the detectors is recorded via the simultaneous measurement of a phonon-mediated signal and scintillation emitted by the CaWO(4) crystal targets. The entire setup is made of carefully selected materials. In this note we report on the development of ultra-pure bronze (CuSn(6)) wire in small quantities for springs and clamps that are currently being used in the CRESST II setup.

Bronze-mean hexagonal quasicrystal

NASA Astrophysics Data System (ADS)

Dotera, Tomonari; Bekku, Shinichi; Ziherl, Primož

2017-10-01

The most striking feature of conventional quasicrystals is their non-traditional symmetry characterized by icosahedral, dodecagonal, decagonal or octagonal axes. The symmetry and the aperiodicity of these materials stem from an irrational ratio of two or more length scales controlling their structure, the best-known examples being the Penrose and the Ammann-Beenker tiling as two-dimensional models related to the golden and the silver mean, respectively. Surprisingly, no other metallic-mean tilings have been discovered so far. Here we propose a self-similar bronze-mean hexagonal pattern, which may be viewed as a projection of a higher-dimensional periodic lattice with a Koch-like snowflake projection window. We use numerical simulations to demonstrate that a disordered variant of this quasicrystal can be materialized in soft polymeric colloidal particles with a core-shell architecture. Moreover, by varying the geometry of the pattern we generate a continuous sequence of structures, which provide an alternative interpretation of quasicrystalline approximants observed in several metal-silicon alloys.

Deformation and erosion of f.c.c. metals and alloys under cavitation attack

NASA Technical Reports Server (NTRS)

Rao, B. C. S.; Buckley, D. H.

1984-01-01

Experimental investigations have been conducted to determine the early stages of cavitation attack on 6061-T6 aluminum alloy, electrolytic tough pitch copper, brass, and bronze, all having polycrystalline fcc matrices. The surface profiles and scanning electron micrographs show that the pits are initially formed at the grain boundaries, while the grain surfaces are progressively roughened by multiple slip and twinning. The initial erosion is noted to have occurred from the material in the grain boundaries, as well as by fragmentation of part of the grains. Further erosion occurred by shearing and necking of the surface undulations caused by plastic deformation. The mean penetration depth, computed on the basis of mass loss, was lowest on the bronze and greatest on the copper. Attention is given to the relation of cavitation attack to grain size, glide stress and stacking fault energy.

Microstructure characterization of hypereutectoid aluminium bronze composite coating

NASA Astrophysics Data System (ADS)

Kucita, P.; Wang, S. C.; Li, W. S.; Cook, R. B.; Starink, M. J.

2015-10-01

Hypereutectoid aluminium bronze coating was deposited onto an E.N. 10503 steel substrate using plasma transferred arc welding (PTA). Microstructure characterisation of the coating and a section near the steel substrate joint was carried out using SEM, EBSD, EDS in conjunction with XRD and depth-sensing nano-indentation. The constituent phases in the coating were identified as: martensitic Cu3Al β1' phase, solid solution of Al in Cu α phase and the intermetallic Fe3Al κ1 phase. The region near the steel substrate was characterised by high hardness, large grains and presence of Cu precipitates. No cracks were observed in this region. The coating has high hardness of 4.9GPa and Young's modulus of 121.7GPa. This is attributed to homogeneous distribution of sub microns size Fe3Al intermetallic phase. The implications of the coating to the engineering application of sheet metal forming are discussed.

Electronic Structures of Purple Bronze KMo6O17 Studied by X-Ray Photoemission Spectra

NASA Astrophysics Data System (ADS)

Qin, Xiaokui; Wei, Junyin; Shi, Jing; Tian, Mingliang; Chen, Hong; Tian, Decheng

X-ray photoemission spectroscopy study has been performed for the purple bronze KMo6O17. The structures of conduction band and valence band are analogous to the results of ultraviolet photoemission spectra and are also consistent with the model of Travaglini et al., but the gap between conduction and valence band is insignificant. The shape of asymmetric and broadening line of O-1s is due to unresolved contributions from the many inequivalent oxygen sites in this crystal structure. Mo 3d core-level spectrum reveals that there are two kinds of valence states of Molybdenum (Mo+5 and Mo+6). The calculated average valence state is about +5.6, which is consistent with the expectation value from the composition of this material. The tail of Mo-3d spectrum toward higher binding energy is the consequence of the excitation of electron-hole pairs with singularity index of 0.21.

Charge density wave properties of the quasi two-dimensional purple molybdenum bronze KMo 6O 17

NASA Astrophysics Data System (ADS)

Balaska, H.; Dumas, J.; Guyot, H.; Mallet, P.; Marcus, J.; Schlenker, C.; Veuillen, J. Y.; Vignolles, D.

2005-06-01

The purple molybdenum bronze KMo 6O 17 is a quasi-two-dimensional compound which shows a Peierls transition towards a commensurate metallic CDW state. Electron spectroscopy (ARUPS), Scanning Tunnelling Microscopy (STM) and spectroscopy (STS) as well as high magnetic field studies are reported. ARUPS studies corroborate the model of the hidden nesting and provide a value of the CDW vector in good agreement with other measurements. STM studies visualize the triple- q CDW in real space. This is consistent with other measurements of the CDW vector. STS studies provide a value of several 10 meV for the average CDW gap. High magnetic field measurements performed in pulsed fields up to 55 T establish that first order transitions to smaller gap states take place at low temperature. These transitions are ascribed to Pauli type coupling. A phase diagram summarizing all observed anomalies and transitions is presented.

Replacement bearing for Rocketdyne SSME HPOTPs using alternate self-lubricating retainer materials

NASA Technical Reports Server (NTRS)

Gleeson, J.; Dufrane, K.; Kannel, J.

1992-01-01

Research was conducted to develop replacement bearings for the Rocketdyne Space Shuttle main engine (SSME) high pressure oxidizer turbopumps (HPOTPs). The replacement bearings consisted of standard balls and races with a special Battelle Self-Lubricating Insert Configuration (BASIC) retainer. The BASIC retainer consists of a phosphor bronze housing with inserts consisting of a polytetrafluoretheylene (PTFE) and bronze compound. The PTFE contacts the balls and the land guiding surface on the outer race. A PTFE transfer film is formed on balls and races, which lubricates the critical interfaces. The BASIC retainer is a one-to-one replacement for the current Armalon retainer, but has superior lubricating properties and is stronger over the broad temperature range anticipated for the HPOTP bearings. As a part of the project 40 sets of balls and races (two sizes) and 52 BASIC retainers were shipped to NASA/MSFC.

Temperature compensated piezoelectric materials

NASA Astrophysics Data System (ADS)

Neurgaonkar, R. R.; Cross, L. E.

1982-01-01

From the electrostriction measurements on SBN crystals, it was found that the fourth order electrostrictive coupling terms are not adequate to fully describe the paraelectric phase above Curie temperature, and hence six rank coupling terms are needed; the electrostrictive coupling terms do not change markedly with cation substitution. Results of SAW measurements on the SBN:60 crystal showed that this composition possesses temperature-compensated orientations and it is similar to other best-known bronze composition PKN. Efforts are being made to establish acoustical losses correctly for this composition and based on this information, necessary changes in crystal composition will be made. The liquid phase epitaxial growth work has been shown to be successful not only for the Sr.5Ba.5Nb206, but other important bronze composition Sr2KNb5015 (hetero-epitaxial growth) onto the various orientations of the SBN crystal. Efforts are under way to establish their piezoelectric and acoustical properties.

Interdependence between electrical and magnetic properties of polycrystalline cobalt-substituted tungsten bronze multiferroic ceramics

NASA Astrophysics Data System (ADS)

Jindal, Shilpi; Devi, Sheela; Vasishth, Ajay; Batoo, Khalid Mujasam; Kumar, Gagan

Polycrystalline cobalt-substituted tungsten bronze ferroelectric ceramics with chemical composition Ba5CaTi2-xCoXNb8O30 (x=0.00, 0.02, 0.04 and 0.08) were synthesized by solid state reaction technique. X-ray diffraction (XRD) technique was used to confirm the phase formation and it revealed the formation of single phase tetragonal structure with space group P4bm. The surface morphology of the samples was studied by using the scanning electron microscopy (SEM) technique. The dielectric properties such as dielectric constant and dielectric loss have been investigated as a function of temperature and frequency. The P-E and M-H studies confirmed the coexistent of ferroelectricity and magnetism at room temperature. The P-E loop study indicated an increase in the coercive field while the M-H study depicted a decrease in the magnetization with the incorporation of cobalt ions.

New media applications and their potential for the advancement of public perceptions of archaeoastronomy and for the testing of archaeoastronomical hypotheses.

NASA Astrophysics Data System (ADS)

MacDonald, J.

This paper looks at the use of astronomical programmes and the development of new media modeling techniques as a means to better understand archaeoastronomy. The paper also suggests that these new methods and technologies are a means of furthering the public perceptions of archaeoastronomy and the important role that 'astronomy' played in the history and development of human culture. This discussion is rooted in a computer simulation of Stonehenge and its land and skyscape. The integration of the astronomy software allows viewing horizon astronomical lignments in relation to digitally recreated Neolithic/Early Bronze Age (EBA) monumental architecture. This work shows how modern virtual modelling techniques can be a tool for testing archaeoastronomical hypotheses, as well as a demonstrative tool for teaching and promoting archaeoastronomy in mainstream media.

Ancient pests: the season of the Santorini Minoan volcanic eruption and a date from insect chitin

NASA Astrophysics Data System (ADS)

Panagiotakopulu, Eva; Higham, Thomas; Sarpaki, Anaya; Buckland, Paul; Doumas, Christos

2013-07-01

Attributing a season and a date to the volcanic eruption of Santorini in the Aegean has become possible by using preserved remains of the bean weevil, Bruchus rufipes, pests of pulses, from the storage jars of the West House, in the Bronze Age settlement at Akrotiri. We have applied an improved pre-treatment methodology for dating the charred insects, and this provides a date of 1744-1538 BC. This date is within the range of others obtained from pulses from the same context and confirms the utility of chitin as a dating material. Based on the nature of the insect material and the life cycle of the species involved, we argue for a summer eruption, which took place after harvest, shortly after this material was transported into the West House storeroom.

Gold Provenance Studies for Romanian Archaeological Objects Using Micro-SR-XRF

NASA Astrophysics Data System (ADS)

Vasilescu, Angela; Constantinescu, Bogdan; Bugoi, Roxana; Radtke, Martin; Reinholz, Uwe; Simon, Rolf

2010-04-01

Studies by Synchrotron Radiation—X-Ray Fluorescence (SR-XRF) for the search of the presence of trace elements like Sb, Sn, Te and Pb in archaeological metallic objects found on the territory of Romania—old coins and Bronze Age jewelry, aimed to determine the provenance of the gold used in their manufacture. The results are compared with the detailed elemental composition of alluvial or primary gold samples, obtained by the same technique. This work attempted to establish the origin of the gold used for the mint of two different types of koson coins. We found that the kosons with monogram are made of refined gold, while the one used for the kosons without monogram is mainly alluvial. The gold used in the manufacture of the Calarasi Vulchitrun-type disk and the Tauteu hair ring is also of alluvial origin.

The sun since the Bronze Age

NASA Technical Reports Server (NTRS)

Eddy, J. A.

1976-01-01

An investigation is conducted concerning the behavior of the sun during the last 7000 years. The C-14 content in carbonaceous fossil material can be used as an indicator regarding the level of solar activity at the time when the carbon was assimilated in the process of photosynthesis. Living trees, such as the bristlecone pine, provide a solar activity record to about 3000 B.C. The record can be extended with the aid of well-preserved dead wood to beyond 5000 B.C. The results of an analysis of solar activity levels as a function of time on the basis of C-14 contents are presented in a graph. Attention is given to the Maunder Minimum, a history of the sun in the last 5000 years, an interpretation of the major C-14 excursions, and the sun and climate history.

Archaeogeophysical data acquisition and analysis at Tel Burna, Israel: a valuable opportunity for ongoing ground-truth investigation and collaboration (Invited)

NASA Astrophysics Data System (ADS)

Pincus, J. A.

2013-12-01

Tel Burna is a site in the Shephelah breadbasket region of the southern part of Israel. It dates to the Bronze and Iron Age periods, 13th - 7th c. BCE. It has been suggested by scholars to be the Biblical site of Libnah. Libnah is mentioned in the Old Testament as an Israelite desert camp that Joshua encamped and fought against (Joshua 10:29-31; Joshua 12:15). Later it was given as a city to the children of Aaron, it joined the Edomites in a revolt against the King of Judah, and finally during the reign of Hezekiah, Libnah was besieged by Sennacherib (2 Kings 19:8, Isaiah 37:8). Today the tel has a flat-topped shape, has an extensive size, and there are clear casemate wall fortifications dating to the 7th c. BCE surrounding it. Thus far silos, floors, a Late Bronze period cultic area, figurines, and other intriguing artifacts have been unearthed at the site. The site is ideal for a case-study in archaeological geophysics method and interpretation in the region because (1) we are involving the method early in what is expected to be a long timeline of ongoing excavations; (2) it appears we have only a few occupation layers with significant architecture built directly on the bedrock; and (3) there is a relatively unconvoluted geological and pedological context. After conversations with the Director of the Tel Burna Archaeological Project, Itzick Shai, it was decided that out of the three areas actively being excavated a ground penetrating radar (GPR) survey of Area B would be most optimal at this time. The goal was to locate the extent of the archaeological material on the leveled area, while also providing better insight to the cultic area presently being excavated. Area B has proven to have been occupied during the Late Bronze Age IIB (13th c. BCE), as evidenced by the large public building associated with cultic remains, and a complex of walls. Using a 400 MHz antenna, a 30x20 meter grid was surveyed in June 2013. The spacing between each profile was 0.30 meters, acquired in a zigzag east-west direction, proceeding south. The area extended from the present excavation border to the north and east. The following paper will discuss the method of data acquisition, post-processing, and analysis of the results. The final conclusions of the survey show a continuation of several key walls to the east, a valuable sub-surface tracing of the limestone bedrock, and the limit to which the archaeological material is present spatially in Area B to the north. These results play a major role in determining where to focus excavation efforts in the 2014 excavation season. This unique collaboration with the archaeological team and ongoing opportunity for archaeological ground-truthing will be documented and published as the site develops. As there is a limited presence of such data within the corpus of published archaeogeophysical research, we look forward to further investigations at the site in the coming years.

Evaluation of the safety and efficiency of novel metallic implant scaler tips manufactured by the powder injection molding technique.

PubMed

Chun, Kyung A; Kum, Kee-Yeon; Lee, Woo-Cheol; Baek, Seung-Ho; Choi, Hae-Won; Shon, Won-Jun

2017-07-11

Although many studies have compared the properties of ultrasonic scaling instruments, it remains controversial as to which is most suitable for implant scaling. This study evaluated the safety and efficiency of novel metallic ultrasonic scaler tips made by the powder injection molding (PIM) technique on titanium surfaces. Mechanical instrumentation was carried out using four types of metal scaler tips consisting of copper (CU), bronze (BR), 316 L stainless steel (316 L), and conventional stainless steel (SS) tips. The instrumented surface alteration image of samples was viewed with scanning electron microscope (SEM) and surface profile of the each sample was investigated with confocal laser scanning microscopy (CLSM). Arithmetic mean roughness (Ra) and maximum height roughness (Rmax) of titanium samples were measured and dissipated power of the scaler tip was estimated for scaling efficiency. The average Ra values caused by the 316 L and SS tip were about two times higher than those of the CU and BR tips (p < 0.05). The Rmax value showed similar results. The efficiency of the SS tip was about 3 times higher than that of CU tip, the 316 L tip is about 2.7 times higher than that of CU tip, and the BR tip is about 1.2 times higher than that of CU tip. Novel metallic bronze alloy ultrasonic scaler tip minimally damages titanium surfaces, similar to copper alloy tip. Therefore, this bronze alloy scaler tip may be promising instrument for implant maintenance therapy.

Thermally conductive metal wool-silicone rubber material can be used as shock and vibration damper

NASA Technical Reports Server (NTRS)

Hough, W. W.

1964-01-01

Bronze wool pads, impregnated with silicon rubber, meet the requirement for a thermally conductive, shock and vibration absorbing material. They serve as spacers in equipment mounting and are resistant to high temperatures.

The Preparation and Characterization of a Sodium Tungsten Bronze

ERIC Educational Resources Information Center

Conroy, Lawrence E.

1977-01-01

Describes an experiment that utilizes the techniques of temperature synthesis, crystallization from a molten salt, oxidation-reduction in a molten salt, powder X-ray diffraction and analysis by high temperature volatilization or a specific ion electrode. (MLH)

130. INTERIOR, SIXTH FLOOR, WING 6100 WEST, SUITE 6000, ROOM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

130. INTERIOR, SIXTH FLOOR, WING 6100 WEST, SUITE 6000, ROOM 6156, OFFICE OF THE SECRETARY OF THE INTERIOR, BRONZE WALL CLOCK - U.S. Department of the Interior, Eighteenth & C Streets Northwest, Washington, District of Columbia, DC

Devonian magmatism in the Timan Range, Arctic Russia - subduction, post-orogenic extension, or rifting?

NASA Astrophysics Data System (ADS)

Pease, V.; Scarrow, J. H.; Silva, I. G. Nobre; Cambeses, A.

2016-11-01

Devonian mafic magmatism of the northern East European Craton (EEC) has been variously linked to Uralian subduction, post-orogenic extension associated with Caledonian collision, and rifting. New elemental and isotopic analyses of Devonian basalts from the Timan Range and Kanin Peninsula, Russia, in the northern EEC constrain magma genesis, mantle source(s) and the tectonic process(es) associated with this Devonian volcanism to a rift-related context. Two compositional groups of low-K2O tholeiitic basalts are recognized. On the basis of Th concentrations, LREE concentrations, and (LREE/HREE)N, the data suggest two distinct magma batches. Incompatible trace elements ratios (e.g., Th/Yb, Nb/Th, Nb/La) together with Nd and Pb isotopes indicate involvement of an NMORB to EMORB 'transitional' mantle component mixed with variable amounts of a continental component. The magmas were derived from a source that developed high (U,Th)/Pb, U/Th and Sm/Nd over time. The geochemistry of Timan-Kanin basalts supports the hypothesis that the genesis of Devonian basaltic magmatism in the region resulted from local melting of transitional mantle and lower crust during rifting of a mainly non-volcanic continental rifted margin.

Early evidence (late 2nd millennium BCE) of plant-based dyeing of textiles from Timna, Israel

PubMed Central

Sukenik, Naama; Iluz, David; Amar, Zohar; Varvak, Alexander; Workman, Vanessa; Shamir, Orit; Ben-Yosef, Erez

2017-01-01

Abstract In this article, we focus on the analysis of dyed textile fragments uncovered at an early Iron Age (11th-10th centuries BCE) copper smelting site during new excavations in the Timna Valley conducted by the Central Timna Valley (CTV) Project, as well as those found by the Arabah Expedition at the Hathor Temple (Site 200), dated to the Late Bronze/early Iron Ages (13th-11th centuries BCE). Analysis by HPLC-DAD identified two organic dyestuffs, Rubia tinctorum L. and indigotin, from a plant source (probably Isatis tinctoria L.). They are among the earliest plants known in the dyeing craft and cultivated primarily for this purpose. This study provides the earliest evidence of textiles dyed utilizing a chemical dyeing process based on an industrial dyeing plant from the Levant. Moreover, our results shed new light on the society operating the copper mines at the time, suggesting the existence of an elite that was interested in these high quality textiles and invested efforts in procuring them by long-distance trade. PMID:28658314

Early evidence (late 2nd millennium BCE) of plant-based dyeing of textiles from Timna, Israel.

PubMed

Sukenik, Naama; Iluz, David; Amar, Zohar; Varvak, Alexander; Workman, Vanessa; Shamir, Orit; Ben-Yosef, Erez

2017-01-01

In this article, we focus on the analysis of dyed textile fragments uncovered at an early Iron Age (11th-10th centuries BCE) copper smelting site during new excavations in the Timna Valley conducted by the Central Timna Valley (CTV) Project, as well as those found by the Arabah Expedition at the Hathor Temple (Site 200), dated to the Late Bronze/early Iron Ages (13th-11th centuries BCE). Analysis by HPLC-DAD identified two organic dyestuffs, Rubia tinctorum L. and indigotin, from a plant source (probably Isatis tinctoria L.). They are among the earliest plants known in the dyeing craft and cultivated primarily for this purpose. This study provides the earliest evidence of textiles dyed utilizing a chemical dyeing process based on an industrial dyeing plant from the Levant. Moreover, our results shed new light on the society operating the copper mines at the time, suggesting the existence of an elite that was interested in these high quality textiles and invested efforts in procuring them by long-distance trade.

Demic and cultural diffusion in prehistoric Europe in the age of ancient genomes.

PubMed

Harris, Eugene E

2017-09-01

Ancient genomes can help us detect prehistoric migrations, population contractions, and admixture among populations. Knowing the dynamics of demography is invaluable for understanding culture change in prehistory, particularly the roles played by demic and cultural diffusion in transformations of material cultures. Prehistoric Europe is a region where ancient genome analyses can help illuminate the interplay between demography and culture change. In Europe, there is more archeological evidence, in terms of detailed studies, radiometric dates, and explanatory hypotheses that can be evaluated, than in any other region of the world. Here I show some important ways that ancient genomes have given us insights into population movements in European prehistory. I also propose that studies might be increasingly focused on specific questions of culture change, for example in evaluating the makers of "transitional" industries as well as the origins of the Gravettian and spread of the Magdalenian. I also discuss genomic evidence supporting the large role that demic expansion has played in the Neolithization of Europe and the formation of the European population during the Bronze Age. © 2017 Wiley Periodicals, Inc.

The Beaker phenomenon and the genomic transformation of northwest Europe.

PubMed

Olalde, Iñigo; Brace, Selina; Allentoft, Morten E; Armit, Ian; Kristiansen, Kristian; Booth, Thomas; Rohland, Nadin; Mallick, Swapan; Szécsényi-Nagy, Anna; Mittnik, Alissa; Altena, Eveline; Lipson, Mark; Lazaridis, Iosif; Harper, Thomas K; Patterson, Nick; Broomandkhoshbacht, Nasreen; Diekmann, Yoan; Faltyskova, Zuzana; Fernandes, Daniel; Ferry, Matthew; Harney, Eadaoin; de Knijff, Peter; Michel, Megan; Oppenheimer, Jonas; Stewardson, Kristin; Barclay, Alistair; Alt, Kurt Werner; Liesau, Corina; Ríos, Patricia; Blasco, Concepción; Miguel, Jorge Vega; García, Roberto Menduiña; Fernández, Azucena Avilés; Bánffy, Eszter; Bernabò-Brea, Maria; Billoin, David; Bonsall, Clive; Bonsall, Laura; Allen, Tim; Büster, Lindsey; Carver, Sophie; Navarro, Laura Castells; Craig, Oliver E; Cook, Gordon T; Cunliffe, Barry; Denaire, Anthony; Dinwiddy, Kirsten Egging; Dodwell, Natasha; Ernée, Michal; Evans, Christopher; Kuchařík, Milan; Farré, Joan Francès; Fowler, Chris; Gazenbeek, Michiel; Pena, Rafael Garrido; Haber-Uriarte, María; Haduch, Elżbieta; Hey, Gill; Jowett, Nick; Knowles, Timothy; Massy, Ken; Pfrengle, Saskia; Lefranc, Philippe; Lemercier, Olivier; Lefebvre, Arnaud; Martínez, César Heras; Olmo, Virginia Galera; Ramírez, Ana Bastida; Maurandi, Joaquín Lomba; Majó, Tona; McKinley, Jacqueline I; McSweeney, Kathleen; Mende, Balázs Gusztáv; Modi, Alessandra; Kulcsár, Gabriella; Kiss, Viktória; Czene, András; Patay, Róbert; Endrődi, Anna; Köhler, Kitti; Hajdu, Tamás; Szeniczey, Tamás; Dani, János; Bernert, Zsolt; Hoole, Maya; Cheronet, Olivia; Keating, Denise; Velemínský, Petr; Dobeš, Miroslav; Candilio, Francesca; Brown, Fraser; Fernández, Raúl Flores; Herrero-Corral, Ana-Mercedes; Tusa, Sebastiano; Carnieri, Emiliano; Lentini, Luigi; Valenti, Antonella; Zanini, Alessandro; Waddington, Clive; Delibes, Germán; Guerra-Doce, Elisa; Neil, Benjamin; Brittain, Marcus; Luke, Mike; Mortimer, Richard; Desideri, Jocelyne; Besse, Marie; Brücken, Günter; Furmanek, Mirosław; Hałuszko, Agata; Mackiewicz, Maksym; Rapiński, Artur; Leach, Stephany; Soriano, Ignacio; Lillios, Katina T; Cardoso, João Luís; Pearson, Michael Parker; Włodarczak, Piotr; Price, T Douglas; Prieto, Pilar; Rey, Pierre-Jérôme; Risch, Roberto; Rojo Guerra, Manuel A; Schmitt, Aurore; Serralongue, Joël; Silva, Ana Maria; Smrčka, Václav; Vergnaud, Luc; Zilhão, João; Caramelli, David; Higham, Thomas; Thomas, Mark G; Kennett, Douglas J; Fokkens, Harry; Heyd, Volker; Sheridan, Alison; Sjögren, Karl-Göran; Stockhammer, Philipp W; Krause, Johannes; Pinhasi, Ron; Haak, Wolfgang; Barnes, Ian; Lalueza-Fox, Carles; Reich, David

2018-03-08

From around 2750 to 2500 bc, Bell Beaker pottery became widespread across western and central Europe, before it disappeared between 2200 and 1800 bc. The forces that propelled its expansion are a matter of long-standing debate, and there is support for both cultural diffusion and migration having a role in this process. Here we present genome-wide data from 400 Neolithic, Copper Age and Bronze Age Europeans, including 226 individuals associated with Beaker-complex artefacts. We detected limited genetic affinity between Beaker-complex-associated individuals from Iberia and central Europe, and thus exclude migration as an important mechanism of spread between these two regions. However, migration had a key role in the further dissemination of the Beaker complex. We document this phenomenon most clearly in Britain, where the spread of the Beaker complex introduced high levels of steppe-related ancestry and was associated with the replacement of approximately 90% of Britain's gene pool within a few hundred years, continuing the east-to-west expansion that had brought steppe-related ancestry into central and northern Europe over the previous centuries.

A hydrologic and archeologic study of climate change in Al Ain, United Arab Emirates

NASA Astrophysics Data System (ADS)

Jorgensen, Donald G.; Yasin al-Tikiriti, Walid

2003-01-01

Aridity trends established for Al Ain, United Arab Emirates, for the past 4500 years correlate with the trends of increased well depths and declining groundwater levels. Depth of wells found at archeologic sites at Hili near Al Ain were correlated to groundwater levels. Trends of declining groundwater levels were related to trends of increasing aridity (climate change). The increasing aridity had a pronounced affect on man's development in Al Ain area as well. For example, nonirrigation farming could not be successfully sustained at the end of the Bronze Age. This thwarted the economic development until the falaj (a water conveyance structure) was introduced in the Iron Age. The aridity trends in Al Ain correspond to contemporaneous aridity trends noted in Mesopotamia and the Dead Sea area, as well as the Middle East, Mediterranean, and northern Africa, in general. Other global climatic changes that are contemporaneous with climate change at Al Ain have been noted. The increased aridity (desertification) trends at Al Ain are contemporaneous with increased atmospheric CO 2 trends as reported by Indermuhle et al. [Nature (398) 121].

Improved whisker pointing technique for micron-size diode contact

NASA Technical Reports Server (NTRS)

Mattauch, R. J.; Green, G.

1982-01-01

Pointed phosphor-bronze whiskers are commonly used to contact micron-size Schottky barrier diodes. A process is presented which allows pointing such wire and achieving the desired cone angle and tip diameter without the use of highly undesirable chemical reagents.

Soil as a record of the past: Mass migration as the result of soil exhausting

NASA Astrophysics Data System (ADS)

van Mourik, Jan; Kluiving, Sjoerd

2014-05-01

An extensive area in Northwest Europe is covered by chemical poor Late Glacial aeolian sands. Till the Bronze Age the soils evolution in the coversand landscapes correlated with the geomorphological structure, Umbric Podzols on coversand ridges, Gleyic Podzols on coversand planes and Umbric or Histic Arenosols in brook valleys. Essential was the storage of nutrients in the biomass of the forest system. The nutrient cycle has been for long time a stabilizing factor in the forest ecosystems, repressing further soil acidification. Human occupation resulted in transformation of natural to cultural soilscapes. Agricultural management introduced lateral transport of nutrients from the soil system to the market and interrupted the natural vertical cycling. The results were soil exhaustion and acceleration of soil acidification. 1. In the early Bronze Age, shifting cultivation was applied to create small lots of arable land. Burning of forest means acceleration of the release of organic stored nutrients, available for crop production. However, the moderate rain climate of Northwest Europe caused leaching of released nutrients that were not quickly recycled. Nutrient losses stimulated the soil acidification and in very dry seasons even small scale sand drifting could occur. Without any nutrient addition (fertilization), shifting cultivation is not a form of sustainable land use and led to land degradation. 2. In the early Iron Age, the system Celtic field came in use. Systematic transport of nutrients from green strips to production lots and harvesting caused gradual nutrient losses of the soilscape and accelerated the soil acidification; Umbric Podzols degraded to Carbic Podzols. Celtic Field land management was also not a sustainable form of land use and led to land degradation. 3. Later in time, the lateral transport of nutrients increased during application of plaggic agriculture. Soil acidification continued on heath lands, the production area of organic manure. During the period with plaggic agriculture, the soils on arable fields development from Umbric Podzols to Plaggic podzols and Plaggic Anthrosols. Agriculture on such field became sustainable under conditions of a low productivity. In several archaeological studies there is evidence that the human impact on soils caused significant nutrient losses, soil degradation and diminishing crop production. People had to migrate to another area which a higher soil fertility to guarantee food production. Patterns of migration to fertile areas (if available) have been studied by archaeologists. Lack of space urged people to invent management techniques and equipment to increase crop production inside the occupied area.

Mass migration as the result of soil exhausting

NASA Astrophysics Data System (ADS)

van Mourik, Jan; Kluiving, Sjoerd

2014-05-01

An extensive area in Northwest Europe is covered by chemical poor Late Glacial aeolian sands. Till the Bronze Age the soils evolution in the coversand landscapes correlated with the geomorphological structure, Umbric Podzols on coversand ridges, Gleyic Podzols on coversand planes and Umbric or Histic Arenosols in brook valleys. Essential was the storage of nutrients in the biomass of the forest system. The nutrient cycle has been for long time a stabilizing factor in the forest ecosystems, repressing further soil acidification. Human occupation resulted in transformation of natural to cultural soilscapes. Agricultural management introduced lateral transport of nutrients from the soil system to the market and interrupted the natural vertical cycling. The results were soil exhaustion and acceleration of soil acidification. 1. In the early Bronze Age, shifting cultivation was applied to create small lots of arable land. Burning of forest means acceleration of the release of organic stored nutrients, available for crop production. However, the moderate rain climate of Northwest Europe caused leaching of released nutrients that were not quickly recycled. Nutrient losses stimulated the soil acidification and in very dry seasons even small scale sand drifting could occur. Without any nutrient addition (fertilization), shifting cultivation is not a form of sustainable land use and led to land degradation. 2. In the early Iron Age, the system Celtic field came in use. Systematic transport of nutrients from green strips to production lots and harvesting caused gradual nutrient losses of the soilscape and accelerated the soil acidification; Umbric Podzols degraded to Carbic Podzols. Celtic Field land management was also not a sustainable form of land use and led to land degradation. 3. Later in time, the lateral transport of nutrients increased during application of plaggic agriculture. Soil acidification continued on heath lands, the production area of organic manure. During the period with plaggic agriculture, the soils on arable fields development from Umbric Podzols to Plaggic podzols and Plaggic Anthrosols. Agriculture on such field became sustainable under conditions of a low productivity. In several archaeological studies there is evidence that the human impact on soils caused significant nutrient losses, soil degradation and diminishing crop production. People had to migrate to another area which a higher soil fertility to guarantee food production. Patterns of migration to fertile areas (if available) have been studied by archaeologists. Lack of space urged people to invent management techniques and equipment to increase crop production inside the occupied area.

Micromorphological investigation on ring road sediments of the Early Bronze Age site Tell Chuera, Syria

NASA Astrophysics Data System (ADS)

Fritzsch, Dagmar; Thiemeyer, Heinrich

2010-05-01

Tell Chuera is an Early Bronze Age settlement mount in NE-Syria close to the Turkish border. With a diameter of almost 1 km and a height of 18 m it is one of the biggest tells in the region between the rivers Balikh and Khabur. In 1958 the structures of the city wall was known first by Orthmann (1990). This city wall was built of air-dried mud bricks. The age of the founding of this construction is not yet clear. The earliest pottery from the place is dated around 2500 BC to 2350 BC. Inside the fortification a road was detected, which was first excavated by Novak (1995). We took sediment monoliths in 2004 from a new trench, which shows the same situation of the road. A geomagnetic prospection, that included the whole site, suggests that the road was part of the planned extension of the lower town and serves as a circular road (Meyer, in prep.). The micromorphological investigation focussed on the question, how the road was used. Did animals have had access to the town? The thin sections show different indications of the anthropogenic influence. In all samples pseudomorphs after straw are visible. In many parts ash, charred wood fragments, bone fragments, melted material and fragments of basalt and flint were observable, too. These materials are typical for sediments in streets (cf. Goldberg & Macphail, 2006). In some parts of the thin sections faecal spherulites and dung remains with faecal spherulites give an idea that ruminants used the road as well as men. Trampling structures support this assumption. Moreover, leaching of calcite, its redeposition in mottles, pseudomycels and concretions, hydromorphic stains and the translocation of silt indicate postdepositional pedogenic processes. Literature Goldberg, P., & Macphail, R. I. (2006). Practical and theoretical geoarchaeology: UK Blackwell Publishing. Meyer, J.-W. (in prep.). Überlegungen zur Siedlungsstruktur - eine erste Analyse der Ergebnisse der geomagnetischen Prospektion. In J.-W. Meyer (Ed.), Ausgrabungen in Tell Chuera in Nordostsyrien II - Vorbericht der Grabungskampagnen 1998 - 2005. Novak, M. (1995). Die Stadtmauergrabung. In W. Orthmann, R. Hempelmann, H. Klein, C. Kühne, M. Novak, A. Pruß, E. Vila, H. M. Weicken & A. Wener (Eds.), Ausgrabungen in Tell Chuera in Nordost-Syrien I - Vorbericht über die Grabungskampagnen von 1986 bis 1992 (Vol. 2, pp. (173 - 182)). Saarbücken.: SDV. Orthmann, W. (1990). Tell Chuera. Ausgrabungen der Max Freiherr von Oppenheim-Stiftung in Nordost-Syrien, Damaskus und Taurus.

Ancient Approaches to the Age-old Problem of Water - How Archaeology Can Contribute to the Water Management Discourse of Socio-Hydrology

NASA Astrophysics Data System (ADS)

Egerer, Kyle

2017-04-01

As "the study of old things", archaeology is concerned with material remnants of the human past. At first glance, archaeology may not appear to align well with the purpose of socio-hydrology. Archaeologists attempt to understand past society by analyzing the materials and architecture that provide them with evidence of how people lived and organized their lives. One aspiration of doing so is to gain a contextualized perspective of how contemporary society became the way it is. Human interaction with water is recorded - among other forms of material evidence - in forms of infrastructure and architecture that people construct to control water's flow and preserve this life-supporting resource in times of human need. Building structures, such as water canals or reservoirs, represent society's endeavor to reconcile nature's incalculable influence on society while subtly revealing humanity's penetration into the natural hydrological cycle. Thus, a bi-directional - or reciprocal - relationship between society and nature exists. Socio-hydrological approaches to water management also attempt to understand this relationship. This contribution introduces an archaeological example of how to conceptualize the human-nature dynamic that can be used to understand the socio-political aspects that envelope water management. To evaluate how the Hittite civilization of Late Bronze Age Anatolia (ca. 1600-1200 B.C.) controlled water resources, the author adopts a socio-ecological approach informed by theories of socio-cultural memory and geomorphological analysis. Critical assessment of Hittite written and cultural evidence are compared with hydraulic infrastructure installations to determine how the Hittites used knowledge of their physical landscape to their advantage. In doing so, a framework for interpreting water management practices is formulated that indicates that solutions to water collection and storage were case-based and highly contextualized. Furthermore, legitimate congruencies between archaeology, socio-hydrology and methodologies of integrated water resource management (IWRM) are presented. This primary research ultimately attempts to ameliorate the theoretical and methodological incongruences of such a highly interdisciplinary field such as socio-hydrology. This approach will fuel a debate within the IWRM discipline about how an archaeological approach for analyzing water management strategies of the past can be used in modern water-management-related issues that encompass human-infrastructural, human-irrigational and human-agricultural systems. Keywords: Socio-hydrology, Bronze Age Archaeology of Anatolia, Hittites, Water Management, Integrated Water Resource Management, Socio-cultural Memory, Perception, Phenomenology, Vulnerability, Human-environment dynamics

13. LOOKING NORTH FROM THE SOUTH, A DETAIL IMAGE OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. LOOKING NORTH FROM THE SOUTH, A DETAIL IMAGE OF THE BRONZE DEDICATION PLAQUE, LOCATED ON THE NORTH INSIDE PARAPET. A TWIN PLAQUE ON THE SOUTHWEST PARAPET. - Seventh Street Bridge, Spanning Haw Creek at Seventh Street, Columbus, Bartholomew County, IN

9. CLOSER VIEW OF SOUTHWEST FACADE FEATURING STATUE, BATHER PUTTING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. CLOSER VIEW OF SOUTHWEST FACADE FEATURING STATUE, BATHER PUTTING UP HER HAIR, 1930, BY ARISTIDE MAILLOL, IN BRONZE, AFTER A SMALLER FIGURE CAST IN 1898 - Kykuit, John D. Rockefeller, Sr. House, 200 Lake Road, Pocantico Hills, Westchester County, NY

Mysterious Chickpea Disease

USDA-ARS?s Scientific Manuscript database

A mysterious disease of chickpea is widespread this year in the Palouse region. Symptoms started showing in late June, and symptomatic plants were scattered all over in fields. Initial symptoms included necrosis/die back of growing tips. The leaves of infected plants turned bronze/yellow, and the...

76 FR 59445 - Withdrawal of Proposed Exemption From Certain Prohibited Transaction Restrictions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... of Wolverine Bronze Company Profit Sharing Plan and Trust (the Plan) and BDR Oil, LLC located in Roseville, Michigan, involving the proposed sale, for cash at fair market value, of a note receivable and royalty interests [[Page 59446

Allele Frequencies Net Database: Improvements for storage of individual genotypes and analysis of existing data.

PubMed

Santos, Eduardo Jose Melos Dos; McCabe, Antony; Gonzalez-Galarza, Faviel F; Jones, Andrew R; Middleton, Derek

2016-03-01

The Allele Frequencies Net Database (AFND) is a freely accessible database which stores population frequencies for alleles or genes of the immune system in worldwide populations. Herein we introduce two new tools. We have defined new classifications of data (gold, silver and bronze) to assist users in identifying the most suitable populations for their tasks. The gold standard datasets are defined by allele frequencies summing to 1, sample sizes >50 and high resolution genotyping, while silver standard datasets do not meet gold standard genotyping resolution and/or sample size criteria. The bronze standard datasets are those that could not be classified under the silver or gold standards. The gold standard includes >500 datasets covering over 3 million individuals from >100 countries at one or more of the following loci: HLA-A, -B, -C, -DPA1, -DPB1, -DQA1, -DQB1 and -DRB1 - with all loci except DPA1 present in more than 220 datasets. Three out of 12 geographic regions have low representation (the majority of their countries having less than five datasets) and the Central Asia region has no representation. There are 18 countries that are not represented by any gold standard datasets but are represented by at least one dataset that is either silver or bronze standard. We also briefly summarize the data held by AFND for KIR genes, alleles and their ligands. Our second new component is a data submission tool to assist users in the collection of the genotypes of the individuals (raw data), facilitating submission of short population reports to Human Immunology, as well as simplifying the submission of population demographics and frequency data. Copyright © 2015 American Society for Histocompatibility and Immunogenetics. Published by Elsevier Inc. All rights reserved.

Developing and implementing an accreditation system for health promoting schools in Northern India: a cross-sectional study.

PubMed

Thakur, Jarnail Singh; Sharma, Deepak; Jaswal, Nidhi; Bharti, Bhavneet; Grover, Ashoo; Thind, Paramjyoti

2014-12-22

The "Health Promoting School" (HPS) is a holistic and comprehensive approach to integrating health promotion within the community. At the time of conducting this study, there was no organized accreditation system for HPS in India. We therefore developed an accreditation system for HPSs using support from key stakeholders and implemented this system in HPS in Chandigarh territory, India. A desk review was undertaken to review HPS accreditation processes used in other countries. An HPS accreditation manual was drafted after discussions with key stakeholders. Seventeen schools (eight government and nine private) were included in the study. A workshop was held with school principals and teachers and other key stakeholders, during which parameters, domains and an accreditation checklist were discussed and finalized. The process of accreditation of these 17 schools was initiated in 2011 according to the accreditation manual. HPSs were encouraged to undertake activities to increase their accreditation grade and were reassessed in 2013 to monitor progress. Each school was graded on the basis of the accreditation scores obtained. The accreditation manual featured an accreditation checklist, with parameters, scores and domains. It categorized accreditation into four levels: bronze, silver, gold and platinum (each level having its own specific criteria and mandate). In 2011, more than half (52.9%) of the schools belonged to the bronze level and only 23.5% were at the gold level. Improvements were observed upon reassessment after 2 years (2013), with 76.4% of schools at the gold level and only 11.8% at bronze. The HPS accreditation system is feasible in school settings and was well implemented in the schools of Chandigarh. Improvements in accreditation scores between 2011 and 2013 suggest that the system may be effective in increasing levels of health promotion in communities.

Measurement of heat conduction through stacked screens

NASA Technical Reports Server (NTRS)

Lewis, M. A.; Kuriyama, T.; Kuriyama, F.; Radebaugh, R.

1998-01-01

This paper describes the experimental apparatus for the measurement of heat conduction through stacked screens as well as some experimental results taken with the apparatus. Screens are stacked in a fiberglass-epoxy cylinder, which is 24.4 mm in diameter and 55 mm in length. The cold end of the stacked screens is cooled by a Gifford-McMahon (GM) cryocooler at cryogenic temperature, and the hot end is maintained at room temperature. Heat conduction through the screens is determined from the temperature gradient in a calibrated heat flow sensor mounted between the cold end of the stacked screens and the GM cryocooler. The samples used for these experiments consisted of 400-mesh stainless steel screens, 400-mesh phosphor bronze screens, and two different porosities of 325-mesh stainless steel screens. The wire diameter of the 400-mesh stainless steel and phosphor bronze screens was 25.4 micrometers and the 325-mesh stainless steel screen wire diameters were 22.9 micrometers and 27.9 micrometers. Standard porosity values were used for the experimental data with additional porosity values used on selected experiments. The experimental results showed that the helium gas between each screen enhanced the heat conduction through the stacked screens by several orders of magnitude compared to that in vacuum. The conduction degradation factor is the ratio of actual heat conduction to the heat conduction where the regenerator material is assumed to be a solid rod of the same cross sectional area as the metal fraction of the screen. This factor was about 0.1 for the stainless steel and 0.022 for the phosphor bronze, and almost constant for the temperature range of 40 to 80 K at the cold end.

Measurement of heat conduction through stacked screens.

PubMed

Lewis, M A; Kuriyama, T; Kuriyama, F; Radebaugh, R

1998-01-01

This paper describes the experimental apparatus for the measurement of heat conduction through stacked screens as well as some experimental results taken with the apparatus. Screens are stacked in a fiberglass-epoxy cylinder, which is 24.4 mm in diameter and 55 mm in length. The cold end of the stacked screens is cooled by a Gifford-McMahon (GM) cryocooler at cryogenic temperature, and the hot end is maintained at room temperature. Heat conduction through the screens is determined from the temperature gradient in a calibrated heat flow sensor mounted between the cold end of the stacked screens and the GM cryocooler. The samples used for these experiments consisted of 400-mesh stainless steel screens, 400-mesh phosphor bronze screens, and two different porosities of 325-mesh stainless steel screens. The wire diameter of the 400-mesh stainless steel and phosphor bronze screens was 25.4 micrometers and the 325-mesh stainless steel screen wire diameters were 22.9 micrometers and 27.9 micrometers. Standard porosity values were used for the experimental data with additional porosity values used on selected experiments. The experimental results showed that the helium gas between each screen enhanced the heat conduction through the stacked screens by several orders of magnitude compared to that in vacuum. The conduction degradation factor is the ratio of actual heat conduction to the heat conduction where the regenerator material is assumed to be a solid rod of the same cross sectional area as the metal fraction of the screen. This factor was about 0.1 for the stainless steel and 0.022 for the phosphor bronze, and almost constant for the temperature range of 40 to 80 K at the cold end.

Strain Rate Dependency of Bronze Metal Matrix Composite Mechanical Properties as a Function of Casting Technique

NASA Astrophysics Data System (ADS)

Brown, Lloyd; Joyce, Peter; Radice, Joshua; Gregorian, Dro; Gobble, Michael

2012-07-01

Strain rate dependency of mechanical properties of tungsten carbide (WC)-filled bronze castings fabricated by centrifugal and sedimentation-casting techniques are examined, in this study. Both casting techniques are an attempt to produce a functionally graded material with high wear resistance at a chosen surface. Potential applications of such materials include shaft bushings, electrical contact surfaces, and brake rotors. Knowledge of strain rate-dependent mechanical properties is recommended for predicting component response due to dynamic loading or impact events. A brief overview of the casting techniques for the materials considered in this study is followed by an explanation of the test matrix and testing techniques. Hardness testing, density measurement, and determination of the volume fraction of WC particles are performed throughout the castings using both image analysis and optical microscopy. The effects of particle filling on mechanical properties are first evaluated through a microhardness survey of the castings. The volume fraction of WC particles is validated using a thorough density survey and a rule-of-mixtures model. Split Hopkinson Pressure Bar (SHPB) testing of various volume fraction specimens is conducted to determine strain dependence of mechanical properties and to compare the process-property relationships between the two casting techniques. The baseline performances of C95400 bronze are provided for comparison. The results show that the addition of WC particles improves microhardness significantly for the centrifugally cast specimens, and, to a lesser extent, in the sedimentation-cast specimens, largely because the WC particles are more concentrated as a result of the centrifugal-casting process. Both metal matrix composites (MMCs) demonstrate strain rate dependency, with sedimentation casting having a greater, but variable, effects on material response. This difference is attributed to legacy effects from the casting process, namely, porosity and localized WC particle grouping.

Micro-chemical and micro-structural investigation of archaeological bronze weapons from the Ayanis fortress (lake Van, Eastern Anatolia, Turkey)

NASA Astrophysics Data System (ADS)

Faraldi, F.; Çilingirǒglu, A.; Angelini, E.; Riccucci, C.; De Caro, T.; Batmaz, A.; Mezzi, A.; Caschera, D.; Cortese, B.

2013-12-01

Bronze weapons (VII cen BC) found during the archaeological excavation of the Ayanis fortress (lake Van, eastern Anatolia, Turkey) are investigated in order to determine their chemical composition and metallurgical features as well as to identify the micro-chemical and micro-structural nature of the corrosion products grown during long-term burial. Small fragments were sampled from the artefacts and analysed by means of the combined use of optical microscopy (OM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The results show that the bronze artefacts have been manufactured by using alloys with a controlled and refined chemical composition demonstrating the high level metallurgical competence and skill of the Urartian craftsmen and artists. Furthermore, the micro-structural and metallurgical investigations evidence the presence of equiaxed grains in the matrix, indicating that the artefact were produced by repeated cycles of mechanical shaping and thermal annealing treatments to restore the alloy ductility. From the degradation point of view, the results show the structures and the chemical composition of the stratified corrosion layers (i.e. the patina) where the copper or tin depletion phenomenon is commonly observed with the surface enrichment of some elements coming from the burial soil, mainly Cl, which is related to the high concentration of chlorides in the Ayanis soil. The results reveal also that another source of degradation is the inter-granular corrosion phenomenon likely increased by the metallurgical features of the alloys caused by the high temperature manufacturing process that induces crystallisation and segregation phenomena along the grain boundaries.

Gold Provenance Studies for Romanian Archaeological Objects Using Micro-SR-XRF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vasilescu, Angela; Constantinescu, Bogdan; Bugoi, Roxana

2010-04-06

Studies by Synchrotron Radiation--X-Ray Fluorescence (SR-XRF) for the search of the presence of trace elements like Sb, Sn, Te and Pb in archaeological metallic objects found on the territory of Romania--old coins and Bronze Age jewelry, aimed to determine the provenance of the gold used in their manufacture. The results are compared with the detailed elemental composition of alluvial or primary gold samples, obtained by the same technique. This work attempted to establish the origin of the gold used for the mint of two different types of koson coins. We found that the kosons with monogram are made of refinedmore » gold, while the one used for the kosons without monogram is mainly alluvial. The gold used in the manufacture of the Calarasi Vulchitrun-type disk and the Tauteu hair ring is also of alluvial origin.« less

Determination of the method of construction of 1650 B.C. wall paintings.

PubMed

Papaodysseus, Constantin; Fragoulis, Dimitrios K; Panagopoulos, Mihalis; Panagopoulos, Thanasis; Rousopoulos, Panayiotis; Exarhos, Mihalis; Skembris, Angelos

2006-09-01

In this paper, a methodology of general applicability is presented for answering the question if an artist used a number of archetypes to draw a painting or if he drew it freehand. In fact, the contour line parts of the drawn objects that potentially correspond to archetypes are initially spotted. Subsequently, the exact form of these archetypes and their appearance throughout the painting is determined. The method has been applied to celebrated Thera Late Bronze Age wall paintings with full success. It has been demonstrated that the artist or group of artists has used seven geometrical archetypes and seven corresponding well-constructed stencils (four hyperbolae, two ellipses, and one Archimedes' spiral) to draw the wall painting "Gathering of Crocus" in 1650 B.C. This method of drawing seems to be unique in the history of arts and of great importance for archaeology, and the history of mathematics and sciences, as well.

Tooth enamel oxygen "isoscapes" show a high degree of human mobility in prehistoric Britain.

PubMed

Pellegrini, Maura; Pouncett, John; Jay, Mandy; Pearson, Mike Parker; Richards, Michael P

2016-10-07

A geostatistical model to predict human skeletal oxygen isotope values (δ 18 O p ) in Britain is presented here based on a new dataset of Chalcolithic and Early Bronze Age human teeth. The spatial statistics which underpin this model allow the identification of individuals interpreted as 'non-local' to the areas where they were buried (spatial outliers). A marked variation in δ 18 O p is observed in several areas, including the Stonehenge region, the Peak District, and the Yorkshire Wolds, suggesting a high degree of human mobility. These areas, rich in funerary and ceremonial monuments, may have formed focal points for people, some of whom would have travelled long distances, ultimately being buried there. The dataset and model represent a baseline for future archaeological studies, avoiding the complex conversions from skeletal to water δ 18 O values-a process known to be problematic.

Tooth enamel oxygen “isoscapes” show a high degree of human mobility in prehistoric Britain

PubMed Central

Pellegrini, Maura; Pouncett, John; Jay, Mandy; Pearson, Mike Parker; Richards, Michael P.

2016-01-01

A geostatistical model to predict human skeletal oxygen isotope values (δ18Op) in Britain is presented here based on a new dataset of Chalcolithic and Early Bronze Age human teeth. The spatial statistics which underpin this model allow the identification of individuals interpreted as ‘non-local’ to the areas where they were buried (spatial outliers). A marked variation in δ18Op is observed in several areas, including the Stonehenge region, the Peak District, and the Yorkshire Wolds, suggesting a high degree of human mobility. These areas, rich in funerary and ceremonial monuments, may have formed focal points for people, some of whom would have travelled long distances, ultimately being buried there. The dataset and model represent a baseline for future archaeological studies, avoiding the complex conversions from skeletal to water δ18O values–a process known to be problematic. PMID:27713538

Tooth enamel oxygen “isoscapes” show a high degree of human mobility in prehistoric Britain

NASA Astrophysics Data System (ADS)

Pellegrini, Maura; Pouncett, John; Jay, Mandy; Pearson, Mike Parker; Richards, Michael P.

2016-10-01

A geostatistical model to predict human skeletal oxygen isotope values (δ18Op) in Britain is presented here based on a new dataset of Chalcolithic and Early Bronze Age human teeth. The spatial statistics which underpin this model allow the identification of individuals interpreted as ‘non-local’ to the areas where they were buried (spatial outliers). A marked variation in δ18Op is observed in several areas, including the Stonehenge region, the Peak District, and the Yorkshire Wolds, suggesting a high degree of human mobility. These areas, rich in funerary and ceremonial monuments, may have formed focal points for people, some of whom would have travelled long distances, ultimately being buried there. The dataset and model represent a baseline for future archaeological studies, avoiding the complex conversions from skeletal to water δ18O values-a process known to be problematic.

A Possible Astronomically Aligned Monolith at Gardom's Edge

NASA Astrophysics Data System (ADS)

Brown, Daniel; Alder, Andy; Bemand, Elizabeth

2015-05-01

A unique triangular shaped monolith located within the Peak District National Park at Gardom's Edge could be intentionally astronomically aligned. It is set within a landscape rich in late Neolithic and Bronze Age remains. We show that the stone is most likely in its original orientation owing to its clear signs of erosion and associated to the time period of the late Neolithic. It is tilted towards south and its north side slopes at an angle equal to the maximum altitude of the Sun at mid-summer. This alignment emphasizes the changing declinations of the Sun during the seasons as well as giving an indication of mid-summers day. This functionality is achieved by an impressive display of light and shadow on the north facing side of the monolith. Together with other monuments in the close vicinity the monolith would have represented an ideal marker or social arena for seasonal gatherings for the otherwise dispersed small communities.

Marine Creatures and the Sea in Bronze Age Greece: Ambiguities of Meaning

NASA Astrophysics Data System (ADS)

Berg, Ina

2013-06-01

Like most cultures, prehistoric Greek communities had an ambiguous relationship with the sea and the creatures that inhabit it. Positive and negative associations always co-existed, though the particular manifestations changed over time. By drawing together evidence of consumption of marine animals, seafaring, fishing, and iconography, this article unites disparate strands of evidence in an attempt to illuminate the relationship prehistoric Greeks had with marine creatures and the sea. Based on the marked reduction in seafood consumption after the Mesolithic and the use of marine creatures in funerary iconography in the post-palatial period, it becomes apparent that the sea—then as now—is an inherently ambiguous medium that captures both positive and negative emotions. On the one hand, the sea and the animals residing in it are strongly associated with death. On the other hand, the sea's positive dimensions, such as fertility and rebirth, are expressed in conspicuous marine consumption events.

The Alphabet and the Sky

NASA Astrophysics Data System (ADS)

Lebeuf, A.

2011-06-01

Since the beginning of the 17th century the letters of the Greek alphabet are used to identify the stars of constellation by order of magnitude. This was simply a practical means of astronomical classification. In several instances the Bible uses such metaphors as "The sky rolled up like a scroll". The idea of associating letters of different alphabets with stars, constellations and the sky in general can be found to day in the marginal subculture. The persistence of such an association of writing with astronomy or cosmology is at least of interest for cultural reasons, but the problem might be of good interest as well for the history of astronomy and cosmology. I present here two examples of this tradition in works of art. The first a painted representation of the Revelation of Saint John in the Orthodox church tradition, and the other in the construction of the late bronze age sacred well at Santa Cristina in Sardinia, Italy.

Ancient genomes revisit the ancestry of domestic and Przewalski's horses.

PubMed

Gaunitz, Charleen; Fages, Antoine; Hanghøj, Kristian; Albrechtsen, Anders; Khan, Naveed; Schubert, Mikkel; Seguin-Orlando, Andaine; Owens, Ivy J; Felkel, Sabine; Bignon-Lau, Olivier; de Barros Damgaard, Peter; Mittnik, Alissa; Mohaseb, Azadeh F; Davoudi, Hossein; Alquraishi, Saleh; Alfarhan, Ahmed H; Al-Rasheid, Khaled A S; Crubézy, Eric; Benecke, Norbert; Olsen, Sandra; Brown, Dorcas; Anthony, David; Massy, Ken; Pitulko, Vladimir; Kasparov, Aleksei; Brem, Gottfried; Hofreiter, Michael; Mukhtarova, Gulmira; Baimukhanov, Nurbol; Lõugas, Lembi; Onar, Vedat; Stockhammer, Philipp W; Krause, Johannes; Boldgiv, Bazartseren; Undrakhbold, Sainbileg; Erdenebaatar, Diimaajav; Lepetz, Sébastien; Mashkour, Marjan; Ludwig, Arne; Wallner, Barbara; Merz, Victor; Merz, Ilja; Zaibert, Viktor; Willerslev, Eske; Librado, Pablo; Outram, Alan K; Orlando, Ludovic

2018-04-06

The Eneolithic Botai culture of the Central Asian steppes provides the earliest archaeological evidence for horse husbandry, ~5500 years ago, but the exact nature of early horse domestication remains controversial. We generated 42 ancient-horse genomes, including 20 from Botai. Compared to 46 published ancient- and modern-horse genomes, our data indicate that Przewalski's horses are the feral descendants of horses herded at Botai and not truly wild horses. All domestic horses dated from ~4000 years ago to present only show ~2.7% of Botai-related ancestry. This indicates that a massive genomic turnover underpins the expansion of the horse stock that gave rise to modern domesticates, which coincides with large-scale human population expansions during the Early Bronze Age. Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

Decline of genetic diversity in ancient domestic stallions in Europe

PubMed Central

Benecke, Norbert; Döhle, Hans-Jürgen; Gonzalez, Javier; Malaspinas, Anna-Sapfo; Trinks, Alexandra

2018-01-01

Present-day domestic horses are immensely diverse in their maternally inherited mitochondrial DNA, yet they show very little variation on their paternally inherited Y chromosome. Although it has recently been shown that Y chromosomal diversity in domestic horses was higher at least until the Iron Age, when and why this diversity disappeared remain controversial questions. We genotyped 16 recently discovered Y chromosomal single-nucleotide polymorphisms in 96 ancient Eurasian stallions spanning the early domestication stages (Copper and Bronze Age) to the Middle Ages. Using this Y chromosomal time series, which covers nearly the entire history of horse domestication, we reveal how Y chromosomal diversity changed over time. Our results also show that the lack of multiple stallion lineages in the extant domestic population is caused by neither a founder effect nor random demographic effects but instead is the result of artificial selection—initially during the Iron Age by nomadic people from the Eurasian steppes and later during the Roman period. Moreover, the modern domestic haplotype probably derived from another, already advantageous, haplotype, most likely after the beginning of the domestication. In line with recent findings indicating that the Przewalski and domestic horse lineages remained connected by gene flow after they diverged about 45,000 years ago, we present evidence for Y chromosomal introgression of Przewalski horses into the gene pool of European domestic horses at least until medieval times. PMID:29675468

Decline of genetic diversity in ancient domestic stallions in Europe.

PubMed

Wutke, Saskia; Sandoval-Castellanos, Edson; Benecke, Norbert; Döhle, Hans-Jürgen; Friederich, Susanne; Gonzalez, Javier; Hofreiter, Michael; Lõugas, Lembi; Magnell, Ola; Malaspinas, Anna-Sapfo; Morales-Muñiz, Arturo; Orlando, Ludovic; Reissmann, Monika; Trinks, Alexandra; Ludwig, Arne

2018-04-01

Present-day domestic horses are immensely diverse in their maternally inherited mitochondrial DNA, yet they show very little variation on their paternally inherited Y chromosome. Although it has recently been shown that Y chromosomal diversity in domestic horses was higher at least until the Iron Age, when and why this diversity disappeared remain controversial questions. We genotyped 16 recently discovered Y chromosomal single-nucleotide polymorphisms in 96 ancient Eurasian stallions spanning the early domestication stages (Copper and Bronze Age) to the Middle Ages. Using this Y chromosomal time series, which covers nearly the entire history of horse domestication, we reveal how Y chromosomal diversity changed over time. Our results also show that the lack of multiple stallion lineages in the extant domestic population is caused by neither a founder effect nor random demographic effects but instead is the result of artificial selection-initially during the Iron Age by nomadic people from the Eurasian steppes and later during the Roman period. Moreover, the modern domestic haplotype probably derived from another, already advantageous, haplotype, most likely after the beginning of the domestication. In line with recent findings indicating that the Przewalski and domestic horse lineages remained connected by gene flow after they diverged about 45,000 years ago, we present evidence for Y chromosomal introgression of Przewalski horses into the gene pool of European domestic horses at least until medieval times.

How to Shop for Health Insurance

MedlinePlus

... by or be eligible for free or low-cost coverage through a public program. If you need to get insurance for ... plans cover 90% or more of health care costs. All catastrophic, bronze, ... and other services. Specific benefits differ from plan to plan, though, so you' ...

Improved rolling element bearings provide low torque and small temperature rise in ultrahigh vacuum environment

NASA Technical Reports Server (NTRS)

Glenn, D. C.

1966-01-01

Rolling element bearing with stainless steel races and rolling elements and a porous bronze cage successfully operates in ultrahigh vacuum environments at a low torque and with small temperature rise. All components are burnished in molybdenum disulfide.