Sample records for uranium-6 weight percent

  1. 49 CFR 173.417 - Authorized fissile materials packages.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... for export and import shipments. (2) A residual “heel” of enriched solid uranium hexafluoride may be... “Heel” in a Specification 7A Cylinder) Maximum cylinder diameter Centimeters Inches Cylinder volume Liters Cubic feet Maximum Uranium 235-enrichment (weight)percent Maximum “Heel” weight per cylinder UF6...

  2. 49 CFR 173.417 - Authorized fissile materials packages.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... for export and import shipments. (2) A residual “heel” of enriched solid uranium hexafluoride may be... “Heel” in a Specification 7A Cylinder) Maximum cylinder diameter Centimeters Inches Cylinder volume Liters Cubic feet Maximum Uranium 235-enrichment (weight)percent Maximum “Heel” weight per cylinder UF6...

  3. Deposit model for volcanogenic uranium deposits

    USGS Publications Warehouse

    Breit, George N.; Hall, Susan M.

    2011-01-01

    The International Atomic Energy Agency's tabulation of volcanogenic uranium deposits lists 100 deposits in 20 countries, with major deposits in Russia, Mongolia, and China. Collectively these deposits are estimated to contain uranium resources of approximately 500,000 tons of uranium, which amounts to 6 percent of the known global resources. Prior to the 1990s, these deposits were considered to be small (less than 10,000 tons of uranium) with relatively low to moderate grades (0.05 to 0.2 weight percent of uranium). Recent availability of information on volcanogenic uranium deposits in Asia highlighted the large resource potential of this deposit type. For example, the Streltsovskoye district in eastern Russia produced more than 100,000 tons of uranium as of 2005; with equivalent resources remaining. Known volcanogenic uranium deposits within the United States are located in Idaho, Nevada, Oregon, and Utah. These deposits produced an estimated total of 800 tons of uranium during mining from the 1950s through the 1970s and have known resources of 30,000 tons of uranium. The most recent estimate of speculative resources proposed an endowment of 200,000 tons of uranium.

  4. Process for electroslag refining of uranium and uranium alloys

    DOEpatents

    Lewis, P.S. Jr.; Agee, W.A.; Bullock, J.S. IV; Condon, J.B.

    1975-07-22

    A process is described for electroslag refining of uranium and uranium alloys wherein molten uranium and uranium alloys are melted in a molten layer of a fluoride slag containing up to about 8 weight percent calcium metal. The calcium metal reduces oxides in the uranium and uranium alloys to provide them with an oxygen content of less than 100 parts per million. (auth)

  5. 10 CFR 71.22 - General license: Fissile material.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to obtain the value of X, then the values for the terms in the equation for uranium-233 and plutonium... if: (i) Uranium-233 is present in the package; (ii) The mass of plutonium exceeds 1 percent of the mass of uranium-235; (iii) The uranium is of unknown uranium-235 enrichment or greater than 24 weight...

  6. 10 CFR 71.22 - General license: Fissile material.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... to obtain the value of X, then the values for the terms in the equation for uranium-233 and plutonium... if: (i) Uranium-233 is present in the package; (ii) The mass of plutonium exceeds 1 percent of the mass of uranium-235; (iii) The uranium is of unknown uranium-235 enrichment or greater than 24 weight...

  7. 10 CFR 71.22 - General license: Fissile material.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... to obtain the value of X, then the values for the terms in the equation for uranium-233 and plutonium... if: (i) Uranium-233 is present in the package; (ii) The mass of plutonium exceeds 1 percent of the mass of uranium-235; (iii) The uranium is of unknown uranium-235 enrichment or greater than 24 weight...

  8. 10 CFR 71.22 - General license: Fissile material.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... to obtain the value of X, then the values for the terms in the equation for uranium-233 and plutonium... if: (i) Uranium-233 is present in the package; (ii) The mass of plutonium exceeds 1 percent of the mass of uranium-235; (iii) The uranium is of unknown uranium-235 enrichment or greater than 24 weight...

  9. 10 CFR 71.22 - General license: Fissile material.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... to obtain the value of X, then the values for the terms in the equation for uranium-233 and plutonium... if: (i) Uranium-233 is present in the package; (ii) The mass of plutonium exceeds 1 percent of the mass of uranium-235; (iii) The uranium is of unknown uranium-235 enrichment or greater than 24 weight...

  10. Analysis of 2H-Evaporator Acid Cleaning Samples

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hay, M.; Diprete, D.; Edwards, T.

    The 2H-Evaporator acid cleaning solution samples were analyzed by SRNL to determine a composition for the scale present in the evaporator before recent acid cleaning. Composite samples were formed from the solution samples from the two acid cleaning cycles. The solution composition was converted to a weight percent scale solids basis under an assumed chemical composition. The scale composition produced from the acid cleaning solution samples indicates a concentration of 6.85 wt% uranium. An upper bound, onesided 95% confidence interval on the weight percent uranium value may be given as 6.9 wt% + 1.645 × 0.596 wt% = 7.9 wt%.more » The comparison of the composition from the current acid cleaning solutions with the composition of recent scale samples along with the thermodynamic modeling results provides reasonable assurance that the sample results provide a good representation of the overall scale composition in the evaporator prior to acid cleaning. The small amount of scale solids dissolved in the 1.5 M nitric acid during the evaporator cleaning process likely produced only a small amount of precipitation based on modeling results and the visual appearance of the samples.« less

  11. METHOD OF DISSOLVING URANIUM METAL

    DOEpatents

    Slotin, L.A.

    1958-02-18

    This patent relates to an economicai means of dissolving metallic uranium. It has been found that the addition of a small amount of perchloric acid to the concentrated nitric acid in which the uranium is being dissolved greatly shortens the time necessary for dissolution of the metal. Thus the use of about 1 or 2 percent of perchioric acid based on the weight of the nitric acid used, reduces the time of dissolution of uranium by a factor of about 100.

  12. The Robinson and Weatherly uraniferous pyrobitumen deposits near Placerville, San Miguel County, Colorado

    USGS Publications Warehouse

    Wilmarth, V.R.; Vickers, R.C.

    1953-01-01

    Uranium deposits that contain uraniferous pyrobitumen of possible hydrothermal origin occur at the Weatherly and Robinson properties near Placerville, San Miguel County, Colo. These deposits were mined for copper, silver, and gold more than 50 years ago and were developed for uranium in 1950. The Robinson property, half a mile east of Placerville, consists of the White Spar, New Discovery Lode, and Barbara Jo claims. The rocks in this area are nearly horizontal sandstones, shales, limestones, and conglomerates of the Cutler formation of Permian age and the Dolores formation of Triassic and Jurassic (?) age. These rocks have been faulted extensively and intruded by a Tertiary (?) andesite porphyry dike. Uranium-bearing pyrobitumen associated with tennantite, tetrahedrite, galena, sphalerite, chalcopyrite, bornite, azurite, malachite, calcite, barite, and quartz occurs in a lenticular body as much as 40 feet long and 6 feet wide along a northwest-trending, steeply dipping normal fault. The uranium content of eleven samples from the uranium deposit ranges from 0.001 to 0.045 percent uranium and averages about 0.02 percent uranium. The Weatherly property, about a mile northwest of Placerville, consists of the Black King claims nos. 1, 4, and 5. The rocks in this area include the complexly faulted Cutler formation of Permian age and the Dolores formation of Triassic and Jurassic (?) age. Uranium-bearing pyrobitumen arid uranophane occur, along a northwest-trending, steeply dipping normal fault and in the sedimentary rocks on the hanging wall of the fault. Lens-shaped deposits in the fault zone are as much as 6 feet long and 2 feet wide and contain as much as 9 percent uranium; whereas channel samples across the fault zone contain from 0.001 to 0.014 percent uranium. Tetrahedrite, chalcopyrite, galena, sphalerite, fuchsite, malachite, azurite, erythrite, bornite, and molybdite in a gangue of pyrite, calcite, barite, and quartz are associated with the uraniferous material. In the sedimentary rocks on the hanging wall, uranium-bearing pyrobitumen occurs in replacement lenses as much as,8 inches wide and 6 feet long, and in nodules as much as 6 inches in diameter for approximately 100 feet away from the fault. Pyrite and calcite are closely associated with the uraniferous material in the sedimentary rocks. Samples from the replacement bodies contain from 0. 007 to 1.4 percent uranium.

  13. Preparation and benchmarking of ANSL-V cross sections for advanced neutron source reactor studies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Arwood, J.W.; Ford, W.E. III; Greene, N.M.

    1987-01-01

    Validity of selected data from the fine-group neutron library was satisfactorily tested in performance parameter calculations for the BAPL-1, TRX-1, and ZEEP-1 thermal lattice benchmarks. BAPL-2 is an H/sub 2/O moderated, uranium oxide lattice; TRX-1 is an H/sub 2/O moderated, 1.31 weight percent enriched uranium metal lattice; ZEEP-1 is a D/sub 2/O-moderated, natural uranium lattice. 26 refs., 1 tab.

  14. Preliminary reconnaissance survey for thorium, uranium, and rare-earth oxides, Bear Lodge Mountains, Crook County, Wyoming

    USGS Publications Warehouse

    Wilmarth, V.R.; Johnson, D.H.

    1953-01-01

    An area about 6 miles north of Sundance, in the Bear Lodge Mountains, in Crook County, Wyo., was examined during August 1950 for thorium, uranium, and rare-earth oxides and samples were collected. Uranium is known to occur in fluorite veins and iron-manganese veins and in the igneous rocks of Tertiary age that compose the core of the Bear Lodge Mountains. The uranium content of the samples ranges from 0.001 to 0.015 percent in those from the fluorite veins, from 0.005 to 0.018 percent in those from the iron-manganese veins, and from 0.001 to 0.017 percent in those from the igneous rocks. The radioactivity of the samples is more than that expected from the uranium content. Thorium accounts for most of this discrepancy. The thorium oxide content of samples ranges from 0.07 to 0.25 percent in those from the iron-manganese veins and from 0.07 to 0.39 percent in those from the sedimentary rocks, and from0.04 to 0.30 in those from the igneous rocks. Rare-earth oxides occur in iron-manganese veins and in zones of altered igneous rocks. The veins contain from 0.16 to 12.99 percent rare-earth oxides, and the igneous rocks, except for two localities, contain from 0.01 to 0.42 percent rare-earth oxides. Inclusions of metamorphosed sedimentary rocks in the intrusive rocks contain from 0.07 to 2.01 percent rare-earth oxides.

  15. 10 CFR 110.22 - General license for the export of source material.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... country not listed in § 110.28: (1) Uranium or thorium, other than U-230, U-232, Th-227, and Th-228, in any substance in concentrations of less than 0.05 percent by weight. (2) Thorium, other than Th-227 and Th-228, in incandescent gas mantles or in alloys in concentrations of 5 percent or less. (3) Th...

  16. Coating method for graphite

    DOEpatents

    Banker, J.G.; Holcombe, C.E. Jr.

    1975-11-06

    A method of limiting carbon contamination from graphite ware used in induction melting of uranium alloys is provided. The graphite surface is coated with a suspension of Y/sub 2/O/sub 3/ particles in water containing about 1.5 to 4 percent by weight sodium carboxymethylcellulose.

  17. Igneous rocks of the East Pacific Rise

    USGS Publications Warehouse

    Engel, A.E.J.; Engel, C.G.

    1964-01-01

    The apical parts of large volcanoes along the East Pacific Rise (islands and seamounts) are encrusted with rocks of the alkali volcanic suite (alkali basalt, andesine- and oligoclase-andesite, and trachyte). In contrast, the more submerged parts of the Rise are largely composed of a tholeiitic basalt which has low concentrations of K, P, U, Th, Pb, and Ti. This tholeiitic basalt is either the predominant or the only magma generated in the earth's mantle under oceanic ridges and rises. It is at least 1000-fold more abundant than the alkali suite, which is probably derived from tholeiitic basalt by magmatic differentiation in and immediately below the larger volcanoes. Distinction of oceanic tholeiites from almost all continental tholeiites is possible on the simple basis of total potassium content, with the discontinuity at 0.3 to 0.5 percent K2O by weight. Oceanic tholeiites also are readily distinguished from some 19 out of 20 basalts of oceanic islands and seamount cappings by having less than 0.3 percent K2O by weight and more than 48 percent SiO2. Deep drilling into oceanic volcanoes should, however, core basalts transitional between the oceanic tholeiites and the presumed derivative alkali basalts.The composition of the oceanic tholeiites suggests that the mantle under the East Pacific Rise contains less than 0.10 percent potassium oxide by weight; 0.1 part per million of uranium and 0.4 part of thorium; a potassium:rubidium ratio of about 1200 and a potassium: uranium ratio of about 104.

  18. Fuel preparation for use in the production of medical isotopes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Policke, Timothy A.; Aase, Scott B.; Stagg, William R.

    The present invention relates generally to the field of medical isotope production by fission of uranium-235 and the fuel utilized therein (e.g., the production of suitable Low Enriched Uranium (LEU is uranium having 20 weight percent or less uranium-235) fuel for medical isotope production) and, in particular to a method for producing LEU fuel and a LEU fuel product that is suitable for use in the production of medical isotopes. In one embodiment, the LEU fuel of the present invention is designed to be utilized in an Aqueous Homogeneous Reactor (AHR) for the production of various medical isotopes including, butmore » not limited to, molybdenum-99, cesium-137, iodine-131, strontium-89, xenon-133 and yttrium-90.« less

  19. Reconnaissance for uranium in black shale, Northern Rocky Mountains and Great Plains, 1953

    USGS Publications Warehouse

    Mapel, W.J.

    1954-01-01

    Reconnaissance examinations for uranium in 22 formations containing black shale were conducted in parts of Montana, North Dakota, Utah, Idaho, and Oregon during 1953. About 150 samples from 80 outcrop localities and 5 oil and gas wells were submitted for uranium determinations. Most of the black shale deposits examined contain less than 0.003 percent uranium; however, thin beds of black shale at the base of the Mississippian system contain 0.005 percent uranium at 2 outcrop localities in southwestern Montana and as much as 0.007 percent uranium in a well in northeastern Montana. An eight-foot bed of phosphatic black shale at the base of the Brazer limestone of Late Mississippian age in Rich County, Utah, contains as much as 0.009 percent uranium. Commercial gamma ray logs of oil and gas wells drilled in Montana and adjacent parts of the Dakotas indicate that locally the Heath shale of Late Mississippian age contains as much as 0.01 percent equivalent uranium, and black shales of Late Cretaceous age contain as much as 0.008 percent equivalent uranium.

  20. Reconnaissance for uranium-bearing carbonaceous rocks in California and adjacent parts of Oregon and Nevada

    USGS Publications Warehouse

    Moore, George Winfred; Stephens, James G.

    1954-01-01

    During the summer of 1952 a reconnaissance was conducted in California and parts of Oregon and Nevada in search of new deposits of uranium-bearing carbonaceous rocks. The principal localities found in California where uranium occurs in coal are listed here with. the uranium content of the coal: Newhall prospect, Los Angeles County, 0.020 percent; Fireflex mine, San Benito County, 0.005 percent; American licyaite mine, Amador County, 0.004 percent; and Tesla prospect, Alameda County, 0.003 percent. An oil-saturated sandstone near Edna, San Luis Obispo County, contains 0.002 percent uranium.

  1. Reconnaissance for uraniferous rocks in northwestern Colorado, southwestern Wyoming, and northeastern Utah

    USGS Publications Warehouse

    Beroni, E.P.; McKeown, F.A.

    1952-01-01

    Previous discoveries and studies of radioactive lignites of Tertiary age in North Dakota, South Dakota, Montana, and Wyoming led the Geological Survey in 1950 to do reconnaissance in the Green River and Uinta Basin of Wyoming and Utah, where similar lignites were believed to be present. Because of the common association of uranium with copper deposits and the presence of such deposits in the Uinta Basin, several areas containing copper-uranium minerals were also examined. No deposits commercially exploitable under present conditions were found. Samples of coal from the Bear River formation at Sage, Wyo., assayed 0.004 to 0.013 percent uranium in the ash; in the old Uteland copper mine in Uinta County, Utah, 0.007 to 0.017 percent uranium; in a freshwater limestone, Duchesne County, Utah, as much as 0.019 percent uranium; and in the Mesaverde formation at the Snow and Bonniebell claims near Jensen, Uintah County, Utah, 0.003 to 0.090 percent uranium. Maps were made and samples were taken at the Skull Creek carnotite deposits in Moffat County, Colo. (0.006 to 0.16 percent uranium); at the Fair-U claims in Routt County, Colo. (0.002 to 0.040 percent uranium); and at the Lucky Strike claims near Kremmling in Grand County, Colo. (0.006 to 0.018 percent uranium).

  2. FORMATION OF URANIUM PRECIPITATES

    DOEpatents

    Googin, J.M. Jr.

    1959-03-17

    A method is described for precipitation of uranium peroxide from uranium- containing solutions so as to obtain larger aggregates which facilitates washings decantations filtrations centrifugations and the like. The desired larger aggregate form is obtained by maintaining the pH of the solution in the approximate range of 1 to 3 and the temperature at about 25 deg C or below while carrytng out the precipitation. Then prior to removal of the precipitate a surface active sulfonated bicarboxyacids such as di-octyl sodium sulfo-succinates is incorporated in an anount of the order of 0.01 to 0.05 percent by weights and the slurry is allowed to ripen for about one-half hour at a temperatare below 10 deg C.

  3. Hot rolling of thick uranium molybdenum alloys

    DOEpatents

    DeMint, Amy L.; Gooch, Jack G.

    2015-11-17

    Disclosed herein are processes for hot rolling billets of uranium that have been alloyed with about ten weight percent molybdenum to produce cold-rollable sheets that are about one hundred mils thick. In certain embodiments, the billets have a thickness of about 7/8 inch or greater. Disclosed processes typically involve a rolling schedule that includes a light rolling pass and at least one medium rolling pass. Processes may also include reheating the rolling stock and using one or more heavy rolling passes, and may include an annealing step.

  4. Mixed uranium dicarbide and uranium dioxide microspheres and process of making same

    DOEpatents

    Stinton, David P.

    1983-01-01

    Nuclear fuel microspheres are made by sintering microspheres containing uranium dioxide and uncombined carbon in a 1 mole percent carbon monoxide/99 mole percent argon atmosphere at 1550.degree. C. and then sintering the microspheres in a 3 mole percent carbon monoxide/97 mole percent argon atmosphere at the same temperature.

  5. Reconnaissance for uranium in the coal of Sao Paulo, Santa Catarina, and Rio Grande do Sul, Brazil

    USGS Publications Warehouse

    Haynes, Donald D.; Pierson, Charles T.; White, Max G.

    1958-01-01

    Uranium-bearing coal and carbonaceous shale of the Rio Bonito formation of Pennsylvanian age have been found in the States of Sao Paulo, Santa Catarlna and Rio Grande do Sul, Brazil. The uranium oxide content of the samples collected in the State of Sao Paulo ranges from 0.001 percent to 0.082 percent. The samples collected in Santa Catarina averaged about 0.002 percent uranium oxide; those collected in Rio Grande do Sul, about 0.003 percent uranium oxide. Since the field and laboratory investigations are still in their initial stages, only raw data on the radioactivity and uranium content of Brazilian coals are given in this report.

  6. Ground-Water Quality of the Northern High Plains Aquifer, 1997, 2002-04

    USGS Publications Warehouse

    Stanton, Jennifer S.; Qi, Sharon L.

    2007-01-01

    An assessment of ground-water quality in the northern High Plains aquifer was completed during 1997 and 2002-04. Ground-water samples were collected at 192 low-capacity, primarily domestic wells in four major hydrogeologic units of the northern High Plains aquifer-Ogallala Formation, Eastern Nebraska, Sand Hills, and Platte River Valley. Each well was sampled once, and water samples were analyzed for physical properties and concentrations of nitrogen and phosphorus compounds, pesticides and pesticide degradates, dissolved solids, major ions, trace elements, dissolved organic carbon (DOC), radon, and volatile organic compounds (VOCs). Tritium and microbiology were analyzed at selected sites. The results of this assessment were used to determine the current water-quality conditions in this subregion of the High Plains aquifer and to relate ground-water quality to natural and human factors affecting water quality. Water-quality analyses indicated that water samples rarely exceeded established U.S. Environmental Protection Agency public drinking-water standards for those constituents sampled; 13 of the constituents measured or analyzed exceeded their respective standards in at least one sample. The constituents that most often failed to meet drinking-water standards were dissolved solids (13 percent of samples exceeded the U.S. Environmental Protection Agency Secondary Drinking-Water Regulation) and arsenic (8 percent of samples exceeded the U.S. Environmental Protection Agency Maximum Contaminant Level). Nitrate, uranium, iron, and manganese concentrations were larger than drinking-water standards in 6 percent of the samples. Ground-water chemistry varied among hydrogeologic units. Wells sampled in the Platte River Valley and Eastern Nebraska units exceeded water-quality standards more often than the Ogallala Formation and Sand Hills units. Thirty-one percent of the samples collected in the Platte River Valley unit had nitrate concentrations greater than the standard, 22 percent exceeded the manganese standard, 19 percent exceeded the sulfate standard, 26 percent exceeded the uranium standard, and 38 percent exceeded the dissolved-solids standard. In addition, 78 percent of samples had at least one detectable pesticide and 22 percent of samples had at least one detectable VOC. In the Eastern Nebraska unit, 30 percent of the samples collected had dissolved-solids concentrations larger than the standard, 23 percent exceeded the iron standard, 13 percent exceeded the manganese standard, 10 percent exceeded the arsenic standard, 7 percent exceeded the sulfate standard, 7 percent exceeded the uranium standard, and 7 percent exceeded the selenium standard. No samples exceeded the nitrate standard. Thirty percent of samples had at least one detectable pesticide compound and 10 percent of samples had at least one detectable VOC. In contrast, the Sand Hills and Ogallala Formation units had fewer detections of anthropogenic compounds and drinking-water exceedances. In the Sand Hills unit, 15 percent of the samples exceeded the arsenic standard, 4 percent exceeded the nitrate standard, 4 percent exceeded the uranium standard, 4 percent exceeded the iron standard, and 4 percent exceeded the dissolved-solids standard. Fifteen percent of samples had at least one pesticide compound detected and 4 percent had at least one VOC detected. In the Ogallala Formation unit, 6 percent of water samples exceeded the arsenic standard, 4 percent exceeded the dissolved-solids standard, 3 percent exceeded the nitrate standard, 2 percent exceeded the manganese standard, 1 percent exceeded the iron standard, 1 percent exceeded the sulfate standard, and 1 percent exceeded the uranium standard. Eight percent of samples collected in the Ogallala Formation unit had at least one pesticide detected and 6 percent had at least one VOC detected. Differences in ground-water chemistry among the hydrogeologic units were attributed to variable depth to water, depth of the well screen below the water table, reduction-oxidation conditions, ground-water residence time, interactions with surface water, composition of aquifer sediments, extent of cropland, extent of irrigated land, and fertilizer application rates.

  7. URANIUM IN ROCK MINERALS OF THE INTRUSION OF KYZL-OMPUL MOUNTAINS (NORTH KIRGISIA) (in Russian)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Leonova, L.L.; Pogiblova, L.S.

    1961-01-01

    The uranium distribution in rock minerals (syenites, granosyenites, and alaskite granites) of the Kyzyl-Ompul raassif is studied. Alaskite granites are characterized by the granite type of uranium distribution in minerals, about 50 percent of this element being connected with rockforming and about 50 percent with accessory uranium minerals. ln syenites uranium (about 70 percent) is bound to rockforming minerals. The same minerals from syenites and granites strongly differ by their uranium content and are constant in the ranges of each of those rock types. Granosyenites have aa intermediate (between syenites and granites) type of uranium distribution in minerals. (auth)

  8. Actinides and Life's Origins

    NASA Astrophysics Data System (ADS)

    Adam, Zachary

    2007-12-01

    There are growing indications that life began in a radioactive beach environment. A geologic framework for the origin or support of life in a Hadean heavy mineral placer beach has been developed, based on the unique chemical properties of the lower-electronic actinides, which act as nuclear fissile and fertile fuels, radiolytic energy sources, oligomer catalysts, and coordinating ions (along with mineralogically associated lanthanides) for prototypical prebiotic homonuclear and dinuclear metalloenzymes. A four-factor nuclear reactor model was constructed to estimate how much uranium would have been required to initiate a sustainable fission reaction within a placer beach sand 4.3 billion years ago. It was calculated that about 1-8 weight percent of the sand would have to have been uraninite, depending on the weight percent, uranium enrichment, and quantity of neutron poisons present within the remaining placer minerals. Radiolysis experiments were conducted with various solvents with the use of uranium- and thorium-rich minerals (metatorbernite and monazite, respectively) as proxies for radioactive beach sand in contact with different carbon, hydrogen, oxygen, and nitrogen reactants. Radiation bombardment ranged in duration of exposure from 3 weeks to 6 months. Low levels of acetonitrile (estimated to be on the order of parts per billion in concentration) were conclusively identified in 2 setups and tentatively indicated in a 3rd by gas chromatography/mass spectrometry. These low levels have been interpreted within the context of a Hadean placer beach prebiotic framework to demonstrate the promise of investigating natural nuclear reactors as power production sites that might have assisted the origins of life on young rocky planets with a sufficiently differentiated crust/mantle structure. Future investigations are recommended to better quantify the complex relationships between energy release, radioactive grain size, fissionability, reactant phase, phosphorus release, and possible abiotic production of sugars, amino acids, activated phosphorus, prototypical organometallic enzymes, and oligomer catalysts at a single putative beach site.

  9. On Line Enrichment Monitor (OLEM) UF 6 Tests for 1.5" Sch40 SS Pipe, Revision 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    March-Leuba, José A.; Garner, Jim; Younkin, Jim

    As global uranium enrichment capacity under international safeguards expands, the International Atomic Energy Agency (IAEA) is challenged to develop effective safeguards approaches at gaseous centrifuge enrichment plants while working within budgetary constraints. The “Model Safeguards Approach for Gas Centrifuge Enrichment Plants” (GCEPs) developed by the IAEA Division of Concepts and Planning in June 2006, defines the three primary Safeguards objectives to be the timely detection of: 1) diversion of significant quantities of natural (NU), depleted (DU) or low-enriched uranium (LEU) from declared plant flow, 2) facility misuse to produce undeclared LEU product from undeclared feed, and 3) facility misuse tomore » produce enrichments higher than the declared maximum, in particular, highly enriched uranium (HEU). The ability to continuously and independently (i.e. with a minimum of information from the facility operator) monitor not only the uranium mass balance but also the 235U mass balance in the facility could help support all three verification objectives described above. Two key capabilities required to achieve an independent and accurate material balance are 1) continuous, unattended monitoring of in-process UF 6 and 2) monitoring of cylinders entering and leaving the facility. The continuous monitoring of in-process UF 6 would rely on a combination of load-cell monitoring of the cylinders at the feed and withdrawal stations, online monitoring of gas enrichment, and a high-accuracy net weight measurement of the cylinder contents. The Online Enrichment Monitor (OLEM) is the instrument that would continuously measure the time-dependent relative uranium enrichment, E(t), in weight percent 235U, of the gas filling or being withdrawn from the cylinders. The OLEM design concept combines gamma-ray spectrometry using a collimated NaI(Tl) detector with gas pressure and temperature data to calculate the enrichment of the UF 6 gas within the unit header pipe as a function of time. The OLEM components have been tested on ORNL UF 6 flow loop. Data were collected at five different enrichment levels (0.71%, 2.97%, 4.62%, 6.0%, and 93.7%) at several pressure conditions. The test data were collected in the standard OLEM N.4242 file format for each of the conditions with a 10-minute sampling period and then averaged over the span of constant pressures. Analysis of the collected data has provided enrichment constants that can be used for 1.5” stainless steel schedule 40 pipe measurement sites. The enrichment constant is consistent among all the wide range of enrichment levels and pressures used.« less

  10. Occurrences of uranium at Clinton, Hunterdon County, New Jersey

    USGS Publications Warehouse

    McKeown, F.A.; Klemic, H.; Choquette, P.W.

    1954-01-01

    An occurrence of uranium at Clinton, Hunterdon County, N. J. was first brought to the attention of the U.S. Geological Survey when Mr. Thomas L. Eak of Avenel, N. J. submitted to the Survey a sample containing 0.068 percent uranium. Subsequent examinations of the area around Clinton indicated that detailed mapping and study were warranted. The uranium occurrences at Clinton are in or associated with fault zones in the Kittatinny limestone of Cambro-Ordovician age. The limestone generally light gray, thick bedded, and dolomitic; chert is common but not abundant. Regionally and locally, faults are the most significant structural features. The local faults at Clinton are the loci for most of the uranium. The largest fault can be traced for about 700 feet and is radioactive everywhere it crops out. Samples from this fault contain as much as 0.038 percent uranium; the average content is about 0.010 percent uranium. Uranium also occurs disseminated in two 4-inch layers of black feldspathic dolomite and in several zones of residual soil derived from the Kittatinny limestone. The black layers contain as much as 0.046 percent uranium and can be traced only about 20 feet along strike. They are cut by a small fault that is also radioactive. The radioactive soil zones are roughly elongated parallel to bedding. Soil from them contains up to 0.008 percent uranium. The uranium occurrences are best explained by a supergene origin. The sampling, mapping, and radioactivity testing of uranium occurrences at Clinton indicate they are too low grade to be of current economic interest.

  11. Contributions to the geology of uranium and thorium by the United States Geological Survey and Atomic Energy Commission for the United Nations International Conference on Peaceful Uses of Atomic Energy, Geneva, Switzerland, 1955

    USGS Publications Warehouse

    Page, Lincoln R.; Stocking, Hobart E.; Smith, Harriet B.

    1956-01-01

    Within the boundaries of the United States abnormal amounts of uranium have been found in rocks of nearly all geologic ages and lithologic types. Distribution of ore is more restricted. On the Colorado Plateau, the Morrison formation of Jurassic age yields 61.4 percent of the ore produced in the United States, and the Chinle conglomerate and Shinarump formation of Triassic age contribute 26.0 and 5.8 percent, respectively. Clastic, carbonaceous, and carbonate sedimentary rocks of Tertiary, Mesozoic, and Paleozoic ages and veins of Tertiary age are the source of the remaining 6.8 percent.

  12. Production of near-full density uranium nitride microspheres with a hot isostatic press

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McMurray, Jacob W.; Kiggans, Jr., Jim O.; Helmreich, Grant W.

    Depleted uranium nitride (UN) kernels with diameters ranging from 420 to 858 microns and theoretical densities (TD) between 87 and 91 percent were postprocessed using a hot isostatic press (HIP) in an argon gas media. This treatment was shown to increase the TD up to above 97%. Uranium nitride is highly reactive with oxygen. Therefore, a novel crucible design was implemented to remove impurities in the argon gas via in situ gettering to avoid oxidation of the UN kernels. The density before and after each HIP procedure was calculated from average weight, volume, and ellipticity determined with established characterization techniquesmore » for particle. Furthermore, micrographs confirmed the nearly full densification of the particles using the gettering approach and HIP processing parameters investigated in this work.« less

  13. 26 CFR 1.993-3 - Definition of export property.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) Application of 50 percent test. The 50 percent test described in subparagraph (1) of this paragraph is applied... uranium concentrates (known in the industry as “yellow cake”), and nuclear fuel materials derived from the refining of uranium ore and uranium concentrates, or produced in a nuclear reaction, including— (a) Uranium...

  14. 26 CFR 1.993-3 - Definition of export property.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) Application of 50 percent test. The 50 percent test described in subparagraph (1) of this paragraph is applied... uranium concentrates (known in the industry as “yellow cake”), and nuclear fuel materials derived from the refining of uranium ore and uranium concentrates, or produced in a nuclear reaction, including— (a) Uranium...

  15. Fuel Retention Improvement at High Temperatures in Tungsten-Uranium Dioxide Dispersion Fuel Elements by Plasma-Spray Cladding

    NASA Technical Reports Server (NTRS)

    Grisaffe, Salvatore J.; Caves, Robert M.

    1964-01-01

    An investigation was undertaken to determine the feasibility of depositing integrally bonded plasma-sprayed tungsten coatings onto 80-volume-percent tungsten - 20-volume-percent uranium dioxide composites. These composites were face clad with thin tungsten foil to inhibit uranium dioxide loss at elevated temperatures, but loss at the unclad edges was still significant. By preheating the composite substrates to approximately 3700 degrees F in a nitrogen environment, metallurgically bonded tungsten coatings could be obtained directly by plasma spraying. Furthermore, even though these coatings were thin and somewhat porous, they greatly inhibited the loss of uranium dioxide. For example, a specimen that was face clad but had no edge cladding lost 5.8 percent uranium dioxide after 2 hours at 4750 dgrees F in flowing hydrogen. A similar specimen with plasma-spray-coated edges, however, lost only 0.75 percent uranium dioxide under the same testing conditions.

  16. U-10Mo Sample Preparation and Examination using Optical and Scanning Electron Microscopy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Prabhakaran, Ramprashad; Joshi, Vineet V.; Rhodes, Mark A.

    2016-10-01

    The purpose of this document is to provide guidelines to prepare specimens of uranium alloyed with 10 weight percent molybdenum (U-10Mo) for optical metallography and scanning electron microscopy. This document also provides instructions to set up an optical microscope and a scanning electron microscope to analyze U-10Mo specimens and to obtain the required information.

  17. U-10Mo Sample Preparation and Examination using Optical and Scanning Electron Microscopy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Prabhakaran, Ramprashad; Joshi, Vineet V.; Rhodes, Mark A.

    2016-03-30

    The purpose of this document is to provide guidelines to prepare specimens of uranium alloyed with 10 weight percent molybdenum (U-10Mo) for optical metallography and scanning electron microscopy. This document also provides instructions to set up an optical microscope and a scanning electron microscope to analyze U-10Mo specimens and to obtain the required information.

  18. Radioactivity and uranium content of the Sharon Springs member of the Pierre shale and associated rocks in western Kansas and eastern Colorado

    USGS Publications Warehouse

    Landis, Edwin R.

    1955-01-01

    As a part of the Geological Survey's program of investigating uranium-bearing carbonaceous rocks on behalf of the Division of Raw Materials of the U.S. Atomic Energy Commission, a reconnaissance of the Sharon Springs member of the Pierre shale in western Kansas and eastern Colorado was conducted during 1954. The Sharon Springs member of the Pierre shale and its lateral equivalents ranges from 155 to about 500 feet in thickness and generally contains about 0.001 percent uranium, but some beds contain larger amounts. A 6-foot thick shale bed in Cheyenne County, Colo., contains about 0.006 percent uranium, a 4 1/2-foot thick sequence of beds in Crowley County, Colo., is estimated to contain between 0.004 and 0.005 percent uranium, and a 3 1/2-foot thick sequence of beds in Kiowa County, Colo., contains about 0.004 percent uranium. At several outcrop localities, sequences of beds as much as 9 1/2 feet thick contain about 0.003 percent uranium. Data from wells indicate that the 4 1/2-foot thick sequence of beds in Crowley County, Colo., may have a lateral extent of at least 5 1/2 miles. A gamma-ray log of a well in Yuma County, Colo., indicates the presence of a sequence of beds 66 feet thick which contains 0.005 to 0.010 percent equivalent uranium. No definite pattern of areal distribution of radioactivity and uranium content in the Sharon Springs is indicated by available data. Lateral variation in uranium content of individual beds was not noted in outcrops, which seldom extend more than 150 feet, but subsurface data from gamma-ray logs of wells indicate that both the maximum radioactivity and the thickness of radioactive beds are variable within distances of a few miles. Vertical variation in radioactivity and uranium content of the more radioactive beds is usually abrupt, but in the rocks as a whole the range of uranium content is so small that large variations in content are absent. In most of the gamma-ray logs examined there is only part of the sequence of rocks comprising the Pierre shale and Niobrara formation that exhibits radioactivity in excess of the average radioactivity of the two formations. Comparison of features of gamma-ray logs of wells in north-eastern Colorado suggests that the most radioactive part referred to above is a laterally correlatable sequence of beds. The stratigraphic position of the radioactive unit relative to the Pierre shale-Niobrara formation contact in oil industry scout reports, as identified from electric logs and wells, is variable within short distances. This may indicate that some of the Pierre-Niobrara contacts picked from electric logs may not correspond to the boundary that would be selected by examination of the rocks themselves, or may indicate that there is a facies relationship between teh lowermost part of the Pierre shale and the uppermost part of the Niobrara formation.

  19. Uranium-bearing lignite in southwestern North Dakota

    USGS Publications Warehouse

    Moore, George W.; Melin, Robert E.; Kepferle, Roy C.

    1954-01-01

    Uranium-bearing lignite was mapped and sampled in the Bullion Butte, Sentinel Butte, HT Butte, and Chalky Buttes areas in southwestern North Dakota. The uraniferous lignite occurs at several stratigraphic positions in the Sentinel Butte member of the Fort Union formation of Paleocene age. A total of 261 samples were collected for uranium analysis from 85 localities, Lignite contained as much as 0.045 percent uranium, 10.0 percent ash, and 0.45 percent uranium in the ash was found although the average is lower. Inferred reserves for the four areas examined are estimated to be about 27 million tons of lignite in beds about 2 feet thick and containing more than 3000 tons of uranium. The lignite in beds about 2 feet thick and containing more than 3000 tons of uranium. The lignite averages more than 30 percent ash in the surface samples. The principal factor that seems to influence the uranium content of lignite beds is their stratigraphic position below the overlying rocks of the White River group of Oligocene age. All of the uranium-bearing beds closely underlie the base of the White River group. Although this relationship seems to be the controlling factor, the relative concentration of uranium may be modified by other conditions. Beds enclosed in permeable rocks are more uraniferous than beds in impermeable rocks, and thin beds have higher content of uranium than thick beds. In addition, thick lignite beds commonly have a top=preferential distribution of uranium. These and other factors suggest that the uranium is secondary and this it was introduced by ground water which had leached uranium from volcanic ash in the overlying rocks of the White River group. It is thought that the uranium is held in the lignite as part of a metallo-organic compound.

  20. Distribution of uranium in the Bisbee district, Cochise County, Arizona

    USGS Publications Warehouse

    Wallace, Stewart R.

    1956-01-01

    The Bisbee district has been an important source of copper for many years, and substantial amounts of lead and zinc ore and minor amounts of manganese ore have been mined during certain periods. The copper deposits occur both as low-grade disseminated ore in the Sacramento Hill stock and as massive sulfide (and secondary oxide and carbonate) replacement bodies in Paleozoic limestones that are intruded by the stock and related igneous bodies. The lead-zinc production has come almost entirely from limestone replacement bodies. The disseminated ore exhibits no anomalous radioactivity, and samples from the Lavender pit contain from 0.002 to less than 0.001 percent equivalent uranium. The limestone replacement ores are distinctly radioactive and stoping areas can be readily distinguished from from unmineralized ground on the basis of radioactivity alone. The equivalent uranium content of the copper replacement ores ranges from 0.002 to 0.014 percent and averages about 0.005 percent; the lead-zinc replacement ores average more than 0.007 percent equivalent uranium. Most of the uranium in the copper ores of the district is retained in the smelter slag of a residual concentrate; the slag contains about 0.009 percent equivalent uranium. Uranium carried off each day by acid mine drainage is roughly equal to 1 percent of that being added to the slag dump. Although the total amount of uranium in the district is large, no minable concentrations of ore-grade material are known; samples of relatively high-grade material represent only small fractions of tons at any one locality.

  1. Isotopic Analysis of Uranium in NIST SRM Glass by Femtosecond Laser Ablation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Duffin, Andrew M.; Hart, Garret L.; Hanlen, Richard C.

    We employed femtosecond Laser Ablation Multicollector Inductively Coupled Mass Spectrometry for the 11 determination of uranium isotope ratios in a series of standard reference material glasses (NIST 610, 612, 614, and 12 616). This uranium concentration in this series of SRM glasses is a combination of isotopically natural uranium in 13 the materials used to make the glass matrix and isotopically depleted uranium added to increase the uranium 14 elemental concentration across the series. Results for NIST 610 are in excellent agreement with literature values. 15 However, other than atom percent 235U, little information is available for the remaining glasses.more » We present atom 16 percent and isotope ratios for 234U, 235U, 236U, and 238U for all four glasses. Our results show deviations from the 17 certificate values for the atom percent 235U, indicating the need for further examination of the uranium isotopes in 18 NIST 610-616. Our results are fully consistent with a two isotopic component mixing between the depleted 19 uranium spike and natural uranium in the bulk glass.« less

  2. Theoretical Model for Volume Fraction of UC, 235U Enrichment, and Effective Density of Final U 10Mo Alloy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Devaraj, Arun; Prabhakaran, Ramprashad; Joshi, Vineet V.

    2016-04-12

    The purpose of this document is to provide a theoretical framework for (1) estimating uranium carbide (UC) volume fraction in a final alloy of uranium with 10 weight percent molybdenum (U-10Mo) as a function of final alloy carbon concentration, and (2) estimating effective 235U enrichment in the U-10Mo matrix after accounting for loss of 235U in forming UC. This report will also serve as a theoretical baseline for effective density of as-cast low-enriched U-10Mo alloy. Therefore, this report will serve as the baseline for quality control of final alloy carbon content

  3. Uranium in the Mayoworth area, Johnson County, Wyoming - a preliminary report

    USGS Publications Warehouse

    Love, J.D.

    1954-01-01

    The uranium mineral, metatyuyamunite, occurs in the basal limestone of the Sundance formation of late Jurassic age along the east flank of the Bighorn Mountains, about 2 miles southwest of the abandoned Mayoworth post office. This occurrence is of particular interest because it is the first uranium mineralization reported from a marine limestone in Wyoming. The discovery uranium claims were filed in July 1953, by J.S. Masek, Dan Oglesby, and Jack Emery of Casper, Wyo. Subsequent reconnaissance investigations have been made by private individuals and geologists of the U.S. Geological Survey and Atomic Energy Commission. The metatyuyamunite is concentrated in a hard gray oolitic limestone that forms the basal bed of the Sundance formation. A selected sample of limestone from a fresh face in the northernmost deposit known at the time of the field examination contained 0.70 percent equivalent uranium and 0.71 percent uranium. Eight samples of the limestone taken at the sample place by the Atomic Energy Commission contained from 0.007 to 0.22 percent uranium. A chip sample from the weathered outcrop at the top of this limestone half a mile to the southeast contained 0.17 percent equivalent uranium and 0.030 percent uranium. A dinosaur bone from the middle part of the Morrison formation contained 0.044 percent equivalent uranium and 0.004 percent uranium. metatyuyamunite forms a conspicuous yellow coating along fracture planes cutting the oolitic limestone and has also replaced many of the oolites within the solid limestone and has also replaced many of the oolites within the solid limestone even where fractures are not present. Many radioactive spots in the basal limestone of the Sundance formation were examined in a reconnaissance fashion along the outcrop for a distance of half a mile south of the initial discovery. Samples were taken for analysis only at the northern and southern margins of this interval. Outcrops farther north and south were not studied. There are not sufficient data to make even rough estimates of tonnage and grade of the occurrences. The extent of the limestone, the approximate boundaries of the area of above-normal radioactivity, and the possibilities of other radioactive zones have not been thoroughly investigated. Although dinosaur bones in the Morrison formation were radioactive wherever they were tested, no significant amount of radioactivity was observed in rocks adjacent to the bones.

  4. Geology of uranium in the Chadron area, Nebraska and South Dakota

    USGS Publications Warehouse

    Dunham, Robert Jacob

    1961-01-01

    The Chadron area covers 375 square miles about 25 miles southeast of the Black Hills. Recurrent mild tectonic activity and erosion on the Chadron arch, a compound anticlinal uplift of regional extent, exposed 1900 feet of Upper Cretaceous rocks, mostly marine shale containing pyrite and organic matter, and 600 feet of Oligocene and Miocene rocks, mostly terrestrial fine-grained sediment containing volcanic ash. Each Cretaceous formation truncated by the sub-Oligocene unconformity is stained yellow and red, leached, kaolinized, and otherwise altered to depths as great as 55 feet. The composition and profile of the altered material indicate lateritic soil; indirect evidence indicates Eocene(?) age. In a belt through the central part of the area, the Brule formation of Oligocene age is a sequence of bedded gypsum, clay, dolomite, and limestone more than 300 feet thick. Uranium in Cretaceous shale in 58 samples averages 0.002 percent, ten times the average for the earths crust. Association with pyrite and organic matter indicates low valency. The uranium probably is syngenetic or nearly so. Uranium in Eocene(?) soil in 43 samples averages 0.054 percent, ranging up to 1.12 percent. The upper part of the soil is depleted in uranium; enriched masses in the basal part of the soil consist of remnants of bedrock shale and are restricted to the highest reaches of the ancient oxidation-reduction interface. The uranium is probably in the from of a low-valent mineral, perhaps uraninite. Modern weathering of Cretaceous shale is capable of releasing as much as 0.780 ppm uranium to water. Eocene(?) weathering probably caused enrichment of the ancient soil through 1) leaching of Cretaceous shale, 2) downward migration of uranyl complex ions, and 3) reduction of hydrogen sulfide at the water table. Uranium minerals occur in the basal 25 feet of the gypsum facies of the Brule formation at the two localities where the gypsum is carbonaceous; 16 samples average 0.066 percent uranium and range up to 0.43 percent. Elsewhere uranium in dolomite and limestone in the basal 25 feet of the gypsum facies in 10 samples averages 0.007 percent, ranging up to 0.12 percent. Localization of the uranium at the base of the gypsum facies suggests downward moving waters; indirect evidence that the water from which the gypsum was deposited was highly alkaline suggests that the uranium was leached from volcanic ash in Oligocene time.

  5. Extended burnup core management for once-through uranium fuel cycles in LWRS. First annual report for the period 1 July 1979-30 June 1980

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sesonske, A.

    1980-08-01

    Detailed core management arrangements are developed requiring four operating cycles for the transition from present three-batch loading to an extended burnup four-batch plan for Zion-1. The ARMP code EPRI-NODE-P was used for core modeling. Although this work is preliminary, uranium and economic savings during the transition cycles appear of the order of 6 percent.

  6. Modeling The Skeleton Weight of an Adult Caucasian Man.

    PubMed

    Avtandilashvili, Maia; Tolmachev, Sergei Y

    2018-05-17

    The reference value for the skeleton weight of an adult male (10.5 kg) recommended by the International Commission on Radiological Protection in Publication 70 is based on weights of dissected skeletons from 44 individuals, including two U.S. Transuranium and Uranium Registries whole-body donors. The International Commission on Radiological Protection analysis of anatomical data from 31 individuals with known values of body height demonstrated significant correlation between skeleton weight and body height. The corresponding regression equation, Wskel (kg) = -10.7 + 0.119 × H (cm), published in International Commission on Radiological Protection Publication 70 is typically used to estimate the skeleton weight from body height. Currently, the U.S. Transuranium and Uranium Registries holds data on individual bone weights from a total of 40 male whole-body donors, which has provided a unique opportunity to update the International Commission on Radiological Protection skeleton weight vs. body height equation. The original International Commission on Radiological Protection Publication 70 and the new U.S. Transuranium and Uranium Registries data were combined in a set of 69 data points representing a group of 33- to 95-y-old individuals with body heights and skeleton weights ranging from 155 to 188 cm and 6.5 to 13.4 kg, respectively. Data were fitted with a linear least-squares regression. A significant correlation between the two parameters was observed (r = 0.28), and an updated skeleton weight vs. body height equation was derived: Wskel (kg) = -6.5 + 0.093 × H (cm). In addition, a correlation of skeleton weight with multiple variables including body height, body weight, and age was evaluated using multiple regression analysis, and a corresponding fit equation was derived: Wskel (kg) = -0.25 + 0.046 × H (cm) + 0.036 × Wbody (kg) - 0.012 × A (y). These equations will be used to estimate skeleton weights and, ultimately, total skeletal actinide activities for biokinetic modeling of U.S. Transuranium and Uranium Registries partial-body donation cases.

  7. Reconnaissance for radioactive materials in northeastern United States during 1952

    USGS Publications Warehouse

    McKeown, Francis A.; Klemic, Harry

    1953-01-01

    Reconnaissance for radioactive materials was made in parts of Maine, New York, New Jersey, and Pennsylvania. The primary objective was to examine the iron ore deposits and associated rocks in the Adirondack Mountains of New York and the Highlands of New Jersey. In addition, several deposits known or reported to contain radioactive minerals were examined to delimit their extent. Most of the deposits examined are not significant as possible sources of radioactive elements and the data pertaining to them are summarized in table form. Deposits that do warrant more description than can be given in table form are: Benson Mines, St. Lawrence County, N. Y.; Rutgers mine, Clinton County, N. Y.; Mineville Mines, Essex County, N. Y.l Canfield phosphate mine, Morris County, N. J.; Mullgan quarry, Hunterdon County, N. J.; and the Chestnut Hill-Marble Mountain area, Pennsylvania and New Jersey. The Old Bed in the Mineville district is the only deposit that may be economically significant. Apatite from Old Bed ore contains as much as 4.9 percent total rare earth. 0.04 percent thorium, and 0.018 percent uranium. Magnetite ore at the Rutgers mine contains radioactive zircon and apatite. Radioactivity measurements of outcrops and dump material show that the ore contains from 0.005 to 0.010 percent equivalent uranium. One sample of lean magnetite ore contains 0.006 percent equivalent uranium. Garnet-rich zones in the Benson Mines magnetite deposit contain as much as 0.017 equivalent uranium. Most of the rock and ore, however, contains about 0.005 percent equivalent uranium. Available data indicate that the garnet-rich zones are enriched in radioactive allanite. A shear zone in the Kittatinny limestone of Cambrian age at the Mulligan quarry contains uraniferous material. Radioactivity anomalies elsewhere in the quarry and in adjacent fields indicate that there may be other uraniferous shear zones. Assays of samples and measurements of outcrop radioactivity indicate that the uranium content of these zones is low; samples contain from 0.008 to 0.068 percent equivalent uranium. The anomalies, however, may indicate greater concentrations of uranium below surficial leached zones. The Chestnut Hill-Marble Mountain area contains radioactivity anomalies for about 2 miles along the strike of the contact of pre-Cambrian Pickering gneiss and Franklin limestone formations. In places this contact is injected with pegmatite, which probably was the source of the radioelements. The most favorable area for further study is at Marble Mountain, where a nearly continuous anomaly extends for about 1500 feet. Samples from part of this area contain as much as 0.044 percent equivalent uranium and 0.005 percent uranium. Radioactive hematite and florencite, in which thorium may have substituted for cerium, are the only radioactive minerals observed in the Marble Mountain area.

  8. Preliminary notes on distribution of uranium in the Florida pebble phosphate field and suggestions for studying and sampling

    USGS Publications Warehouse

    ,

    1948-01-01

    The accompanying map and sections show examples of the present state of information about the occurrence of the "Leached" uranium-bearing bed in the Florida pebble phosphate district. The dashed lines on the map define, as closely as present data permit, the limit of the area in which this bed contains significant amounts of uranium. The figures next to localities on the map indicate first, the thickness of the bed in feet; and second the uranium content in thousandths of percent. For example, the figures 16-10 next to the TVA localities in Secs. 9 and 10, T. 32 S., R. 26 E. indicate 16 feet at 0.010 percent uranium. A "0" by a locality indicates either that the uranium content is less than 0.001 percent or less than the concentration in the underlying phosphate beds (matrix of the miners) or that the leached bed is not present.

  9. METHOD AND FLUX COMPOSITION FOR TREATING URANIUM

    DOEpatents

    Foote, F.

    1958-08-23

    ABS>A flux composition is described fer use with molten uranium or uranium alloys. The flux consists of about 46 weight per cent calcium fiuoride, 46 weight per cent magnesium fluoride and about 8 weight per cent of uranium tetrafiuoride.

  10. Impact of Reprocessed Uranium Management on the Homogeneous Recycling of Transuranics in PWRs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Youinou, Gilles J.

    This article presents the results of a neutronics analysis related to the homogeneous recycling of transuranics (TRU) in PWRs with a MOX fuel using enriched uranium instead of depleted uranium. It also addresses an often, if not always, overlooked aspect related to the recycling of TRU in PWRs, namely the use of reprocessed uranium. From a neutronics point of view, it is possible to multi-recycle the entirety of the plutonium with or without neptunium and americium in a PWR fleet using MOX-EU fuel in between one third and two thirds of the fleet. Recycling neptunium and americium with plutonium significantlymore » decreases the decay heat of the waste stream between 100 to 1,000 years compared to those of an open fuel cycle or when only plutonium is recycled. The uranium present in MOX-EU used fuel still contains a significant amount of 235uranium and recycling it makes a major difference on the natural uranium needs. For example, a PWR fleet recycling its plutonium, neptunium and americium in MOXEU needs 28 percent more natural uranium than a reference UO 2 open cycle fleet generating the same energy if the reprocessed uranium is not recycled and 19 percent less if the reprocessed uranium is recycled back in the reactors, i.e. a 47 percent difference.« less

  11. Impact of Reprocessed Uranium Management on the Homogeneous Recycling of Transuranics in PWRs

    DOE PAGES

    Youinou, Gilles J.

    2017-05-04

    This article presents the results of a neutronics analysis related to the homogeneous recycling of transuranics (TRU) in PWRs with a MOX fuel using enriched uranium instead of depleted uranium. It also addresses an often, if not always, overlooked aspect related to the recycling of TRU in PWRs, namely the use of reprocessed uranium. From a neutronics point of view, it is possible to multi-recycle the entirety of the plutonium with or without neptunium and americium in a PWR fleet using MOX-EU fuel in between one third and two thirds of the fleet. Recycling neptunium and americium with plutonium significantlymore » decreases the decay heat of the waste stream between 100 to 1,000 years compared to those of an open fuel cycle or when only plutonium is recycled. The uranium present in MOX-EU used fuel still contains a significant amount of 235uranium and recycling it makes a major difference on the natural uranium needs. For example, a PWR fleet recycling its plutonium, neptunium and americium in MOXEU needs 28 percent more natural uranium than a reference UO 2 open cycle fleet generating the same energy if the reprocessed uranium is not recycled and 19 percent less if the reprocessed uranium is recycled back in the reactors, i.e. a 47 percent difference.« less

  12. Chain Reacting System

    NASA Astrophysics Data System (ADS)

    Fermi, Enrico; Leverett, Miles C.

    This Patent focuses mainly on the description of an automatic system for the control rods in a nuclear reactor (in the present case made of natural uranium and graphite) reporting, aside from several related theoretical points (already considered in previous Patents), a detailed description of it. Since the reproduction ratio of a lattice structure is reduced by the presence of neutron absorbing impurities, such impurities can be introduced in the lattice in the form of control rods, made of a material such as boron or cadmium, which will absorb large amounts of neutrons. The control procedure is based on the fact that the depth to which the control rod penetrates into the lattice will determine the value of the neutron density in the system. This relatively simple task faces the fact that the reproduction ratio of the structure can change due to changes in temperature and pressure in the system. So, a connection of the control rods with an ionization chamber, measuring neutron density, can give an automatic control of the stability of the chain reaction. Moreover, an emergency circuit for operating the safety rods is illustrated in this Patent, and, in case of failure of both the control and emergency circuits, a third automatic circuit is depicted which causes the dump of a portion of the lattice structure for interrupting the neutron density rise. In a system of the type considered, about 92 percent of the total heat generated originates in the uranium toward the center of the lattice, about 6 percent originates in the graphite used as slowing medium, and the remaining 2 percent is generated in the structures surrounding the pile. Accordingly, the permissible power output of the reactor is limited by the rate of heat removal, so that, to prevent the accumulation of heat in the chain reaction pile, a coolant into contact with the uranium must be employed. However, the corrosive effect on uranium of the possible coolants has to be taken into account, because the presence in the system of high temperatures and intense neutron densities causes an acceleration of any normal rate of corrosion, resulting in the physical deterioration of the uranium in the system. It is essential, then, that the circulating medium be of such a character as not to destroy the uranium bodies in the system. In the present case, the cooling medium is gaseous helium circulating in the active regions of the reactor, which has the advantage of minimizing the possible corrosion of the fissile material, since it is an inert gas, and the absorption of neutrons. However, other possible choices, affecting the determination of the multiplication factor, for the coolant gas (such as air, oxigen or water vapor) are discussed as well in terms of their "danger coefficients", defined in terms of the ratio of the weight of impurity per unit mass of uranium and based on the cross section for absorption of thermal neutrons of the various elements [Fermi (1942a)]. The discussion of some methods of cooling chain reacting piles was initiated in [Fermi (1942g)], but no reference published paper exists of the material presented here.

  13. Fission-gas release from uranium nitride at high fission rate density

    NASA Technical Reports Server (NTRS)

    Weinstein, M. B.; Kirchgessner, T. A.; Tambling, T. N.

    1973-01-01

    A sweep gas facility has been used to measure the release rates of radioactive fission gases from small UN specimens irradiated to 8-percent burnup at high fission-rate densities. The measured release rates have been correlated with an equation whose terms correspond to direct recoil release, fission-enhanced diffusion, and atomic diffusion (a function of temperature). Release rates were found to increase linearly with burnups between 1.5 and 8 percent. Pore migration was observed after operation at 1550 K to over 6 percent burnup.

  14. Actinides and Life's Origins.

    PubMed

    Adam, Zachary

    2007-12-01

    There are growing indications that life began in a radioactive beach environment. A geologic framework for the origin or support of life in a Hadean heavy mineral placer beach has been developed, based on the unique chemical properties of the lower-electronic actinides, which act as nuclear fissile and fertile fuels, radiolytic energy sources, oligomer catalysts, and coordinating ions (along with mineralogically associated lanthanides) for prototypical prebiotic homonuclear and dinuclear metalloenzymes. A four-factor nuclear reactor model was constructed to estimate how much uranium would have been required to initiate a sustainable fission reaction within a placer beach sand 4.3 billion years ago. It was calculated that about 1-8 weight percent of the sand would have to have been uraninite, depending on the weight percent, uranium enrichment, and quantity of neutron poisons present within the remaining placer minerals. Radiolysis experiments were conducted with various solvents with the use of uraniumand thorium-rich minerals (metatorbernite and monazite, respectively) as proxies for radioactive beach sand in contact with different carbon, hydrogen, oxygen, and nitrogen reactants. Radiation bombardment ranged in duration of exposure from 3 weeks to 6 months. Low levels of acetonitrile (estimated to be on the order of parts per billion in concentration) were conclusively identified in 2 setups and tentatively indicated in a 3(rd) by gas chromatography/mass spectrometry. These low levels have been interpreted within the context of a Hadean placer beach prebiotic framework to demonstrate the promise of investigating natural nuclear reactors as power production sites that might have assisted the origins of life on young rocky planets with a sufficiently differentiated crust/mantle structure. Future investigations are recommended to better quantify the complex relationships between energy release, radioactive grain size, fissionability, reactant phase, phosphorus release, and possible abiotic production of sugars, amino acids, activated phosphorus, prototypical organometallic enzymes, and oligomer catalysts at a single putative beach site.

  15. Determination of uranium in natural waters

    USGS Publications Warehouse

    Barker, Franklin Butt; Johnson, J.O.; Edwards, K.W.; Robinson, B.P.

    1965-01-01

    A method is described for the determination of very low concentrations of uranium in water. The method is based on the fluorescence of uranium in a pad prepared by fusion of the dried solids from the water sample with a flux of 10 percent NaF 45.5 percent Na2CO3 , and 45.5 percent K2CO3 . This flux permits use of a low fusion temperature and yields pads which are easily removed from the platinum fusion dishes for fluorescence measurements. Uranium concentrations of less than 1 microgram per liter can be determined on a sample of 10 milliliters, or less. The sensitivity and accuracy of the method are dependent primarily on the purity of reagents used, the stability and linearity of the fluorimeter, and the concentration of quenching elements in the water residue. A purification step is recommended when the fluorescence is quenched by more than 30 percent. Equations are given for the calculation of standard deviations of analyses by this method. Graphs of error functions and representative data are also included.

  16. Large decadal-scale changes in uranium and bicarbonate in groundwater of the irrigated western U.S

    USGS Publications Warehouse

    Burow, Karen R.; Belitz, Kenneth; Dubrovsky, Neil M.; Jurgens, Bryant C.

    2017-01-01

    Samples collected about one decade apart from 1105 wells from across the U.S. were compiled to assess whether uranium concentrations in the arid climate are linked to changing bicarbonate concentrations in the irrigated western U.S. Uranium concentrations in groundwater were high in the arid climate in the western U.S, where uranium sources are abundant. Sixty-four wells (6%) were above the U.S. EPA MCL of 30 μg/L; all but one are in the arid west. Concentrations were low to non-detectable in the humid climate. Large uranium and bicarbonate increases (differences are greater than the uncertainty in concentrations) occur in 109 wells between decade 1 and decade 2. Similarly, large uranium and bicarbonate decreases occur in 76 wells between the two decades. Significantly more wells are concordant (uranium and bicarbonate are both going the same direction) than discordant (uranium and bicarbonate are going opposite directions) (p < 0.001; Chi-square test). The largest percent difference in uranium concentrations occur in wells where uranium is increasing and bicarbonate is also increasing. These large differences occur mostly in the arid climate. Results are consistent with the hypothesis that changing uranium concentrations are linked to changes in bicarbonate in irrigated areas of the western U.S.

  17. Irradiation of three T-111 clad uranium nitride fuel pins for 8070 hours at 990 C (1815 F)

    NASA Technical Reports Server (NTRS)

    Slaby, J. G.; Siegel, B. L.; Gedeon, L.; Galbo, R. J.

    1973-01-01

    The design and successful operation of three tantalum alloy (Ta-8W-2Hf) clad uranium mononitride (UN) fuel pins irradiated for 8070 hr at 990 C (1815 F) is described. Two pin diameters having measured burnups of 0.47 and 0.90 uranium atom percent were tested. No clad failures or swelling was detected; however, postirradiation clad samples tested failed with 1 percent strain. The fuel density decrease was 2 percent, and the fission gas release was less than 0.05 percent. Isotropic fuel swelling, which averaged about 0.5 percent, was less than fuel pin assembly clearances. Thus the clad was not strained. Thermocouples with a modified hot zone operated at average temperatures to 1100 C (2012 F) without failure. Factors that influence the ability to maintain uniform clad temperature as well as the results of the heat transfer calculations are discussed.

  18. Assessment of nonpoint source chemical loading potential to watersheds containing uranium waste dumps and human health hazards associated with uranium exploration and mining, Red, White, and Fry Canyons, southeastern Utah, 2007

    USGS Publications Warehouse

    Beisner, Kimberly R.; Marston, Thomas M.; Naftz, David L.; Snyder, Terry; Freeman, Michael L.

    2010-01-01

    During May, June, and July 2007, 58 solid-phase samples were collected from abandoned uranium mine waste dumps, background sites, and adjacent streambeds in Red, White, and Fry Canyons in southeastern Utah. The objectives of this sampling program were to (1) assess the nonpoint-source chemical loading potential to ephemeral and perennial drainage basins from uranium waste dumps and (2) assess potential effects on human health due to recreational activities on and around uranium waste dumps on Bureau of Land Management property. Uranium waste-dump samples were collected using solid-phase sampling protocols. After collection, solid-phase samples were homogenized and extracted in the laboratory using a leaching procedure. Filtered (0.45 micron) water samples were obtained from the field leaching procedure and were analyzed for major and trace elements at the Inductively Coupled Plasma-Mass Spectrometry Metals Analysis Laboratory at the University of Utah. A subset of the solid-phase samples also were digested with strong acids and analyzed for major ions and trace elements at the U.S. Geological Survey Geologic Division Laboratory in Denver, Colorado. For the initial ranking of chemical loading potential for uranium waste dumps, results of leachate analyses were compared with existing aquatic-life and drinking-water-quality standards. To assess potential effects on human health, solid-phase digestion values for uranium were compared to soil screening levels (SSL) computed using the computer model RESRAD 6.5 for a probable concentration of radium. One or more chemical constituents exceeded aquatic life and drinking-water-quality standards in approximately 64 percent (29/45) of the leachate samples extracted from uranium waste dumps. Most of the uranium waste dump sites with elevated trace-element concentrations in leachates were located in Red Canyon. Approximately 69 percent (31/45) of the strong acid digestible soil concentration values were greater than a calculated SSL. Uranium waste dump sites with elevated leachate and total digestible concentrations may need to be further investigated to determine the most appropriate remediation method.

  19. Unrestrained swelling of uranium-nitride fuel irradiated at temperatures ranging from 1100 to 1400 K (1980 to 2520 R)

    NASA Technical Reports Server (NTRS)

    Rohal, R. G.; Tambling, T. N.

    1973-01-01

    Six fuel pins were assembled, encapsulated, and irradiated in the Plum Brook Reactor. The fuel pins employed uranium mononitride (UN) in a stainless steel (type 304L) clad. The pins were irradiated for approximately 4000 hours to burnups of about 2.0 atom percent uranium. The average clad surface temperature during irradiation was about 1100 K (1980 deg R). Since stainless steel has a very low creep strength relative to that of UN at this temperature, these tests simulated unrestrained swelling of UN. The tests indicated that at 1 percent uranium atom burnup the unrestrained diametrical swelling of UN is about 0.5, 0.8, and 1.0 percent at 1223, 1264, and 1306 K (2200, deg 2273 deg, and 2350 deg R), respectively. The tests also indicated that the irradiation induced swelling of unrestrained UN fuel pellets appears to be isotropic.

  20. Testing of uranium nitride fuel in T-111 cladding at 1200 K cladding temperature

    NASA Technical Reports Server (NTRS)

    Rohal, R. G.; Tambling, T. N.; Smith, R. L.

    1973-01-01

    Two groups of six fuel pins each were assembled, encapsulated, and irradiated in the Plum Brook Reactor. The fuel pins employed uranium mononitride (UN) in a tantalum alloy clad. The first group of fuel pins was irradiated for 1500 hours to a maximum burnup of 0.7-atom-percent uranium. The second group of fuel pins was irradiated for about 3000 hours to a maximum burnup of 1.0-atom-percent uranium. The average clad surface temperature during irradiation of both groups of fuel pins was approximately 1200 K. The postirradiation examination revealed the following: no clad failures or fuel swelling occurred; less than 1 percent of the fission gases escaped from the fuel; and the clad of the first group of fuel pins experienced clad embrittlement whereas the second group, which had modified assembly and fabrication procedures to minimize contamination, had a ductile clad after irradiation.

  1. The East Slope No. 2 uranium prospect, Piute County, Utah

    USGS Publications Warehouse

    Wyant, Donald Gray

    1954-01-01

    The secondary uranium minerals autunite, metatorbernite, uranophane(?), and schroeckingerite occur in altered hornfels at the East Slope No. 9. uranium prospect. The deposit, in sec. 6, T. 9.7 S., R. 3 W., Piute County, Utah, is about 1 mile west of the Bullion Monarch mine which is in the central producing area of the Marysvale uranium district. Hornfels, formed by contact metamorphism of rocks of the Bullion Canyon volcanics borderhug the margin of a quartz monzonite stock, is in fault contact with the later Mount Belknap rhyolite. The hornfels was intensely altered by hydrothermal solutions in pre-Mount Belknap time. Hematite-alunite-quartz-kaolinite rock, the most completely altered hornfels, is surrounded by orange to white argillized hornfels containing beidellite-montmorillonite clay, and secondary uranium minerals. The secondary uranium minerals probably have been derived from pitchblende, the primary ore mineral in other deposits of the Marysvale area. The two uranium-rich zones, 4 feet ad 5 feet thick, have been traced on the surface for 60 feet and 110 feet, respectively. Channel samples from these zones contained as much as 0.047 percent uranium. The deposit is significant because of its position outside the central producing area and because of the association of uranium minerals with alunitic rock in hydrothermally altered hornfels of volcanic rocks of early Tertiary age.

  2. Glass-ceramic composition for hermetic seals

    DOEpatents

    Ballard, Jr., Clifford P.

    1979-01-01

    The invention relates to a glass-ceramic composition having a high fracture strength adaptable for hermetically sealing to chromium bearing iron or nickel base alloys at temperatures of between about 950.degree. C to about 1100.degree. C to form a hermetically sealed insulator body, comprising from about 55 to about 65 weight percent SiO.sub.2, from about 0 to about 5 weight percent Al.sub.2 O.sub.3, from about 6 to about 11 weight % Li.sub.2 O, from about 25 to about 32 weight percent BaO, from about 0.5 to about 1.0 weight percent CoO and from about 1.5 to about 3.5 weight percent P.sub.2 O.sub.5.

  3. Determining Pu-239 content by resonance transmission analysis using a filtered reactor beam.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Klann, R. T.

    A novel technique has been developed at Argonne National Laboratory to determine the {sup 239}Pu content in EBR-II blanket elements using resonance transmission analysis (RTA) with a filtered reactor beam. The technique uses cadmium and gadolinium filters along with a {sup 239}Pu fission chamber to isolate the 0.3 eV resonance in {sup 239}Pu. In the energy range from 0.1 to 0.5 eV, the total microscopic cross-section of {sup 239}Pu is significantly larger than the cross-sections of {sup 238}U and {sup 235}U. This large difference in cross-section allows small amounts of {sup 239}Pu to be detected in uranium samples. Tests usingmore » a direct beam from a 250 kW TRIGA reactor have been performed with stacks of depleted uranium and {sup 239}Pu foils. Preliminary measurement results are in good agreement with the predicted results up to about two weight percent of {sup 239}Pu in the sample. In addition, measured {sup 239}Pu masses were in agreement with actual sample masses with uncertainties less than 3.8 percent.« less

  4. Radioactive rare-earth deposit at Scrub Oaks mine, Morris County, New Jersey

    USGS Publications Warehouse

    Klemic, Harry; Heyl, A.V.; Taylor, Audrey R.; Stone, Jerome

    1959-01-01

    A deposit of rare-earth minerals in the Scrub Oaks iron mine, Morris County, N. J., was mapped and sampled in 1955. The rare-earth minerals are mainly in coarse-grained magnetite ore and in pegmatite adjacent to it. Discrete bodies of rare-earth-bearing magnetite ore apparently follow the plunge of the main magnetite ore body at the north end of the mine. Radioactivity of the ore containing rare earths is about 0.2 to 0.6 mllliroentgens per hour. The principal minerals of the deposit are quartz, magnetite, hematite, albiteoligoclase, perthite and antiperthite. Xenotime and doverite aggregates and bastnaesite with intermixed leucoxene are the most abundant rare-earth minerals, and zircon, sphene, chevkinite, apatite, and monazite are of minor abundance in the ore. The rare-earth elements are partly differentiated into cerium-rich bastnaesite, chevkinite, and monazite, and yttrium-rich xenotime and doverite. Apatite, zircon, and sphene contain both cerium and yttrium group earths. Eleven samples of radioactive ore and rock average 0.009 percent uranium, 0.062 percent thorium, 1.51 percent combined rare-earth oxides including yttrium oxide and 24.8 percent iron. Scatter diagrams of sample data show a direct correlation between equivalent uranium, uranium, thorium, and combined rare^ earth oxides. Both cerium- and yttrium-group earths are abundant in the rare-earth minerals. Radioactive magnetite ore containing rare-earth minerals probably formed as a variant of the magnetite mineralization that produced the main iron ore of the Scrub Oaks deposit. The rare-earth minerals and the iron ore were deposited contemporaneously. Zircon crystals, probably deposited at the same time, have been determined by the Larsen method to be about 550 to 600 million years old (late Precambrian age). Uranium, thorium, and rare-earth elements are potential byproducts of iron in the coarse-grained magnetite ore.

  5. 10 CFR 150.14 - Commission regulatory authority for physical protection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... significance in quantities greater than 15 grams of plutonium or uranium-233 or uranium-235 (enriched to 20 percent or more in the U-235 isotope) or any combination greater than 15 grams when computed by the equation grams=grams uranium-235+grams plutonium+grams uranium-233 shall meet the physical protection...

  6. 10 CFR 150.14 - Commission regulatory authority for physical protection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... significance in quantities greater than 15 grams of plutonium or uranium-233 or uranium-235 (enriched to 20 percent or more in the U-235 isotope) or any combination greater than 15 grams when computed by the equation grams=grams uranium-235+grams plutonium+grams uranium-233 shall meet the physical protection...

  7. 10 CFR 150.14 - Commission regulatory authority for physical protection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... significance in quantities greater than 15 grams of plutonium or uranium-233 or uranium-235 (enriched to 20 percent or more in the U-235 isotope) or any combination greater than 15 grams when computed by the equation grams=grams uranium-235+grams plutonium+grams uranium-233 shall meet the physical protection...

  8. 10 CFR 150.14 - Commission regulatory authority for physical protection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... significance in quantities greater than 15 grams of plutonium or uranium-233 or uranium-235 (enriched to 20 percent or more in the U-235 isotope) or any combination greater than 15 grams when computed by the equation grams=grams uranium-235+grams plutonium+grams uranium-233 shall meet the physical protection...

  9. 10 CFR 150.14 - Commission regulatory authority for physical protection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... significance in quantities greater than 15 grams of plutonium or uranium-233 or uranium-235 (enriched to 20 percent or more in the U-235 isotope) or any combination greater than 15 grams when computed by the equation grams=grams uranium-235+grams plutonium+grams uranium-233 shall meet the physical protection...

  10. Isotopic analysis of uranium in natural waters by alpha spectrometry

    USGS Publications Warehouse

    Edwards, K.W.

    1968-01-01

    A method is described for the determination of U234/U238 activity ratios for uranium present in natural waters. The uranium is coprecipitated from solution with aluminum phosphate, extracted into ethyl acetate, further purified by ion exchange, and finally electroplated on a titanium disc for counting. The individual isotopes are determined by measurement of the alpha-particle energy spectrum using a high resolution low-background alpha spectrometer. Overall chemical recovery of about 90 percent and a counting efficiency of 25 percent allow analyses of water samples containing as little as 0.10 ?g/l of uranium. The accuracy of the method is limited, on most samples, primarily by counting statistics.

  11. Association between cesarean delivery rate and body mass index.

    PubMed

    Berendzen, Jodi A; Howard, Bobby C

    2013-01-01

    The purpose of this study was to evaluate the association between cesarean delivery rate and body mass index (BMI) for the patient population served by the University of Tennessee Medical Center in Knoxville, TN. A retrospective, cohort study was conducted using the perinatal birthlog fromJanuary 1, 2009 through December 31, 2009. The database totaled 2,399 women. Women who delivered > or = 23 weeks gestational age were included. Those missing data imperative to our study (height, weight, mode of delivery) were excluded. Thus, our study included 2,235 women. Cesarean delivery rate was calculated for each of the five BMI categories. Univariate analysis using Chi square, Mann-Whitney U test and independent t-test were used to describe associations between body mass index, mode of delivery and other independent variables. Additional analyses were made on the subset of nulliparous women. Using prepregnancy BMI, 6.7 percent of our population was underweight, 44.3 percent normal weight, 22.6 percent overweight, 20.6 percent obese, and 5.8 percent morbidly obese. The overall cesarean delivery rate was 36.2 percent. Twenty-six percent of underweight and 31.4 percent of normal weight women required cesarean delivery, while 39.1 percent of overweight, 40.8 percent of obese and 56.6 percent of morbidly obese women required cesarean delivery. In addition to cesarean delivery, hypertensive disorders (OR 3.29; 95% CI 2.51-4.31) and diabetes (OR 5.27; 95% CI 3.73-7.44) complicated significantly more pregnancies of obese women than normal weight women. There was an increased rate of cesarean delivery as BMI increased. Increased BMI is also associated with other pregnancy complications, including hypertensive disorders and diabetes.

  12. Uranium nitride fuel fabrication for SP-100 reactors

    NASA Technical Reports Server (NTRS)

    Mason, Richard E.; Chidester, Kenneth M.; Hoth, Carl W.; Matthews, Bruce R.

    1987-01-01

    Fuel pins of uranium mononitride clad in Nb-1 percent Zr were fabricated for irradiation tests in EBR-II. Laboratory scale process parameters to synthesize UN powders and fabricate UN pellets were developed. Uranium mononitride was prepared by converting UO2 to UN. Fuel pellets were prepared by communition of UN briquettes, uniaxial pressing, and high temperature sintering. Techniques for machining, cleaning, and welding Nb-1 percent Zr cladding components were developed. End caps were electron beam welded to the tubing. Helium back-fill holes were sealed with a laser weld.

  13. Uranium nitride fuel fabrication for SP-100 reactors

    NASA Astrophysics Data System (ADS)

    Mason, Richard E.; Chidester, Kenneth M.; Hoth, Carl W.; Matthews, Bruce R.

    Fuel pins of uranium mononitride clad in Nb-1 percent Zr were fabricated for irradiation tests in EBR-II. Laboratory scale process parameters to synthesize UN powders and fabricate UN pellets were developed. Uranium mononitride was prepared by converting UO2 to UN. Fuel pellets were prepared by communition of UN briquettes, uniaxial pressing, and high temperature sintering. Techniques for machining, cleaning, and welding Nb-1 percent Zr cladding components were developed. End caps were electron beam welded to the tubing. Helium back-fill holes were sealed with a laser weld.

  14. RECOVERY OF URANIUM FROM AQUEOUS PHOSPHATE-CONTAINING SOLUTIONS

    DOEpatents

    Igelsrud, I.; Stephen, E.F.

    1959-08-11

    ABS>A method is presented for recovering hexavalent uranium from an acidic phosphaie solution. A high molecular weight amine, such as a mixture of cccoanut oil amines, is added to the solution in such amount as to give a ratio of about 2000 parts by weight of amine to 1 part by weight of uranium. The uranium is precipitated with the amines and the whole filtered from the solution. The uranium is leached from the amine mass by washing with aqueous sodium carbonate solution; and the amine mixture is available for reuse.

  15. Reconnaissance for radioactive deposits in eastern Alaska, 1952

    USGS Publications Warehouse

    Nelson, Arthur Edward; West, Walter S.; Matzko, John J.

    1954-01-01

    Reconnaissance for radioactive deposits was conducted in selected areas of eastern Alaska during 1952. Examination of copper, silver, and molybdenum occurrences and of a reported nickel prospect in the Slana-Nabesna and Chisana districts in the eastern Alaska Range revealed a maximum radioactivity of about 0.003 percent equivalent uranium. No appreciable radioactivity anomolies were indicated by aerial and foot traverses in the area. Reconnaissance for possible lode concentrations of uranium minerals in the vicinity of reported fluoride occurrences in the Hope Creek and Miller House-Circle Hot Springs areas of the Circle quadrangle and in the Fortymile district found a maximum of 0.055 percent equivalent uranium in a float fragment of ferruginous breccia in the Hope Creek area; analysis of samples obtained in the vicinity of the other fluoride occurrences showed a maximum of only 0.005 percent equivalent uranium. No uraniferous loads were discovered in the Koyukuk-Chandalar region, nor was the source of the monazite, previously reported in the placer concentrates from the Chandalar mining district, located. The source of the uranotheorianite in the placers at Gold Bench on the South Fork of the Koyukuk River was not found during a brief reconaissance, but a placer concentrate was obtained that contains 0.18 percent equivalent uranium. This concentrate is about ten times more radioactive than concentrates previously available from the area.

  16. Exploration for uranium-vanadium deposits by the U.S. Geological Survey in the Club Mesa area, Uravan district, Montrose County, Colorado

    USGS Publications Warehouse

    Boardman, R.L.; Litsey, L.R.; Bowers, H.E.

    1958-01-01

    Club Mesa is one of the most productive areas for uranium-vanadium ore in southwestern Colorago. The average grade of this ore has ranged from about 0.25 to 1.50 percent U3O8 and 1.5 to 5.0 percent V2O5.

  17. Reconnaissance for radioactive materials in the southern part of Brazil

    USGS Publications Warehouse

    Pierson, Charles T.; Haynes, Donald D.; Filho, Evaristo Ribeiro

    1957-01-01

    During 1954-1956 a reconnaissance for radioactive minerals was made with carborne, airborne and handborne scintillation equipment in the southern Brazilian states of Rio de Janeiro, Sao Paulo, Parana, Santa Catarina and Rio Grande do Sul. During the traverse covering more than 5,000 kilometers the authors checked the radioactivity of Precambrian igneous and metamorphic rocks, Paleozoic, Mesozoic and Cenozoic sedimentary rocks, and Mesozoic alkalic intrusive and basaltic extrusive rocks. The 22 samples collected contained from 0.003 to 0.029 percent equivalent uranium oxide and from 0.10 to 0.91 percent equivalent thorimn; two samples were taken from radioactive pegmati tes for mineralogic studies. None of the localities is at present a commercial source of uranium or thorium; however, additional work should be done near the alkalic stock at Lages in the State of Santa Catarina and at the Passo das Tropas fossil plant locality near Santa Maria in the state of Rio Grande do Sul. Near Lages highly altered alkalic rock from a dike contained 0.026 percent uranium oxide. At Passo das Tropas highly altered, limonite-impregnated sandstone from the Rio do Rasto group of sedimentary rocks contained 0.029 percent uranium oxide.

  18. Projections of forest contributions to global carbon cycles

    Treesearch

    Michael E. Goerndt; Stephen R. Shifley; Patrick D. Miles; Dave Wear; Francisco X. Aguilar

    2016-01-01

    Forests cover 42 percent of the Northern United States, and collectively they store 13 billion tons of carbon in live trees (29 percent), roots (6 percent), forest floor (9 percent), dead trees (6 percent), and soils (50 percent). About half the biomass of a live tree (dry weight basis) is sequestered carbon (Woodall et al. 2011) - not the largest but the most dynamic...

  19. Nuclear Fuel Reprocessing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Harold F. McFarlane; Terry Todd

    2013-11-01

    Reprocessing is essential to closing nuclear fuel cycle. Natural uranium contains only 0.7 percent 235U, the fissile (see glossary for technical terms) isotope that produces most of the fission energy in a nuclear power plant. Prior to being used in commercial nuclear fuel, uranium is typically enriched to 3–5% in 235U. If the enrichment process discards depleted uranium at 0.2 percent 235U, it takes more than seven tonnes of uranium feed to produce one tonne of 4%-enriched uranium. Nuclear fuel discharged at the end of its economic lifetime contains less one percent 235U, but still more than the natural ore.more » Less than one percent of the uranium that enters the fuel cycle is actually used in a single pass through the reactor. The other naturally occurring isotope, 238U, directly contributes in a minor way to power generation. However, its main role is to transmute into plutoniumby neutron capture and subsequent radioactive decay of unstable uraniumand neptuniumisotopes. 239Pu and 241Pu are fissile isotopes that produce more than 40% of the fission energy in commercially deployed reactors. It is recovery of the plutonium (and to a lesser extent the uranium) for use in recycled nuclear fuel that has been the primary focus of commercial reprocessing. Uraniumtargets irradiated in special purpose reactors are also reprocessed to obtain the fission product 99Mo, the parent isotope of technetium, which is widely used inmedical procedures. Among the fission products, recovery of such expensive metals as platinum and rhodium is technically achievable, but not economically viable in current market and regulatory conditions. During the past 60 years, many different techniques for reprocessing used nuclear fuel have been proposed and tested in the laboratory. However, commercial reprocessing has been implemented along a single line of aqueous solvent extraction technology called plutonium uranium reduction extraction process (PUREX). Similarly, hundreds of types of reactor fuels have been irradiated for different purposes, but the vast majority of commercial fuel is uranium oxide clad in zirconium alloy tubing. As a result, commercial reprocessing plants have relatively narrow technical requirements for used nuclear that is accepted for processing.« less

  20. Liposuction of the arm concurrent with brachioplasty in the massive weight loss patient: is it safe?

    PubMed

    Bossert, Ronald P; Dreifuss, Stephanie; Coon, Devin; Wollstein, Adi; Clavijo-Alvarez, Julio; Gusenoff, Jeffrey A; Rubin, J Peter

    2013-02-01

    Brachioplasty continues to be a sought-after procedure among the massive weight loss population. Residual adiposity of the upper arm can make this procedure more difficult. The authors sought to determine the safety of arm liposuction outside the region of excision with concomitant excisional brachioplasty. Data were analyzed from a prospective registry of massive weight loss patients who underwent brachioplasty alone or with concurrent arm liposuction. Variables examined included age, sex, body mass index, method of weight loss, medical comorbidities, and smoking status. Outcomes included complications such as seroma, wound dehiscence, infection, hematoma, lymphedema, and need for revision. Multivariate analyses were performed to assess outcome measures. One hundred forty-four patients (139 women and five men; mean body mass index, 29.6 ± 4.1 kg/m; mean age, 46 ± 10.7 years) underwent brachioplasty. Sixty-four patients had concomitant arm liposuction at the time of brachioplasty. The remaining 80 patients underwent excisional brachioplasty alone. Despite significantly higher operative body mass indices among those undergoing concurrent liposuction, no significant differences in complication rates were seen between the liposuction and excision-alone cohorts for seroma (19.1 percent versus 23.1 percent), wound dehiscence (7.9 percent versus 2.6 percent), infection (4.8 percent versus 6.4 percent), hematoma (3.2 percent versus 0 percent), or lymphedema (3.2 percent versus 1.3 percent). Revision rates were similar between the two groups (9.5 percent with liposuction and 8.9 percent without liposuction). Liposuction can be performed safely and effectively outside the region of excision at the time of brachioplasty without the need for prior debulking or staged arm-contouring procedures. Therapeutic, III.

  1. Long-term ecological effects of exposure to uranium

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hanson, W.C.; Miera, F.R. Jr.

    1976-03-01

    The consequences of releasing natural and depleted uranium to terrestrial ecosystems during development and testing of depleted uranium munitions were investigated. At Eglin Air Force Base, Florida, soil at various distances from armor plate target butts struck by depleted uranium penetrators was sampled. The upper 5 cm of soil at the target bases contained an average of 800 ppM of depleted uranium, about 30 times as much as soil at 5- to 10-cm depth, indicating some vertical movement of depleted uranium. Samples collected beyond about 20 m from the targets showed near-background natural uranium levels, about 1.3 +- 0.3 ..mu..g/gmore » or ppM. Two explosives-testing areas at the Los Alamos Scientific Laboratory (LASL) were selected because of their use history. E-F Site soil averaged 2400 ppM of uranium in the upper 5 cm and 1600 ppM at 5-10 cm. Lower Slobovia Site soil from two subplots averaged about 2.5 and 0.6 percent of the E-F Site concentrations. Important uranium concentration differences with depth and distance from detonation points were ascribed to the different explosive tests conducted in each area. E-F Site vegetation samples contained about 320 ppM of uranium in November 1974 and about 125 ppM in June 1975. Small mammals trapped in the study areas in November contained a maximum of 210 ppM of uranium in the gastrointestinal tract contents, 24 ppM in the pelt, and 4 ppM in the remaining carcass. In June, maximum concentrations were 110, 50, and 2 ppM in similar samples and 6 ppM in lungs. These data emphasized the importance of resuspension of respirable particles in the upper few millimeters of soil as a contamination mechanism for several components of the LASL ecosystem.« less

  2. Influence of season growth, soils and irrigation water composition on the concentration of uranium in two lettuce (Lactuca sativa L.) varieties. Field experiments

    NASA Astrophysics Data System (ADS)

    Abreu, M. M.; Neves, O.; Marcelino, M.

    2012-04-01

    Former uranium mines areas are frequently the sources of environmental radionuclides problems even many years after the closure of mining operations. A concern for inhabitants from mining areas is the use of contaminated land or irrigation water for agriculture, and the potential transfer of metals from soils to vegetables, and to humans through the food chain. The main aim of this study was to compare the uranium concentration in lettuce (Lactuca sativa L. varieties Marady and Romana) grown in different seasons (autumn and summer) and exposed to high and low uranium concentrations both in irrigation water and agricultural soil. The content of uranium in irrigation water, soil (total and available fraction) and in lettuce leaf samples was analyzed in a certified laboratory. In the field experiments, two agricultural soils were divided into two plots (four replicates each); one of them was irrigated with uranium contaminated water (0.94 to 1.14 mg/L) and the other with uncontaminated water (< 0.02 mg/L). Irrigation with contaminated water together with highest soil uranium available concentration (10 to 13 mg/kg) had negative effects on both studied lettuce varieties, namely yield reduction (up to 53% and 87% in autumn and summer experiments, respectively) and increase of uranium leaf concentration (up to 1.4 and 7 fold in autumn and summer, respectively). Effect on lettuce yield was mainly due to the high soil salinity (1.01 to 6.31 mS/cm) as a consequence of high irrigation water electrical conductivity (up to 1.82 mS/cm) and low lettuce soil salinity tolerance (1 to 3 mS/cm). The highest lettuce uranium concentration (dry weight) observed was 2.13 and 5.37 mg/kg for Marady and Romana variety, respectively. The highest uranium lettuce concentration in Romana variety was also the effect of its growing in summer season when it was subject to greatest frequency and amount of water irrigation. The consumption by an adult of the lettuce that concentrate more uranium, represents only 16.7% of the tolerable daily limit intake set by World Health Organisation for this element (0.6 mg/kg body weight daily), suggesting that lettuce uranium intake had a low contribution and do not represent a potential health risk for Cunha Baixa's residents.

  3. Preparation and biosorption evaluation of Bacillus subtilis/alginate–chitosan microcapsule

    PubMed Central

    Tong, Ke

    2017-01-01

    The aim of this study was to assess the effect of alginate–chitosan microcapsule on viability characteristics of Bacillus subtilis and the ability of B. subtilis/alginate–chitosan microcapsule to remove uranium ion from aqueous solution. The effects of particle size, chitosan molecular weight and inoculum density on viability characteristics were studied using alginate–chitosan microcapsule-immobilized B. subtilis experiments. In addition, the effects of pH, immobilized spherule dosage, temperature, initial uranium ion concentration and contact time on removal of uranium ion were studied using batch adsorption experiments. The results showed that alginate–chitosan microcapsule significantly improved the viability characteristics of B. subtilis and that B. subtilis/alginate–chitosan microcapsule strongly promoted uranium ion absorption. Moreover, the optimum values of pH was 6; immobilized spherule dosage was 3.5; temperature was 20°C; initial uranium ion concentration was 150 mg/L; contact time was 3 h of uranium ion absorption and the maximum adsorption capacity of uranium ion was 376.64 mg/g. PMID:28223783

  4. Uranium in Kosovo's drinking water.

    PubMed

    Berisha, Fatlume; Goessler, Walter

    2013-11-01

    The results of this paper are an initiation to capture the drinking water and/or groundwater elemental situation in the youngest European country, Kosovo. We aim to present a clear picture of the natural uranium concentration in drinking water and/or groundwater as it is distributed to the population of Kosovo. Nine hundred and fifty-one (951) drinking water samples were analyzed by inductively coupled plasma mass spectrometry (ICPMS). The results are the first countrywide interpretation of the uranium concentration in drinking water and/or groundwater, directly following the Kosovo war of 1999. More than 98% of the samples had uranium concentrations above 0.01 μg L(-1), which was also our limit of quantification. Concentrations up to 166 μg L(-1) were found with a mean of 5 μg L(-1) and median 1.6 μg L(-1) were found. Two point six percent (2.6%) of the analyzed samples exceeded the World Health Organization maximum acceptable concentration of 30 μg L(-1), and 44.2% of the samples exceeded the 2 μg L(-1) German maximum acceptable concentrations recommended for infant food preparations. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Effects of spaceflight on the spermatogonial population of rat seminiferous epithelium

    NASA Technical Reports Server (NTRS)

    Sapp, Walter J.; Philpott, Delbert E.; Williams, Carol S.; Kato, Katharine; Stevenson, Joann; Vasquez, M.; Serova, L. V.

    1990-01-01

    Testes from rats flown on Cosmos 1887 were compared with vivarium control and synchronous control samples. The mean weights of flight testes, normalized for weight per 100 g, were 6.4 percent less when compared with the vivarium controls. Counts of spermatogonia from tissue sections (seminiferous tubules in maturation stage 6) from five animals in each group revealed 4 percent fewer spermatogonia in flight testes compared with synchronous controls and 11 percent fewer spermatogonia in flight samples compared with vivarium controls.

  6. Results of exploration at the Old Leyden coal mine, Jefferson County, Colorado

    USGS Publications Warehouse

    Gude, A.J.; McKeown, F.A.

    1953-01-01

    Six diamond core holes totaling 2, 201 feet were drilled by the. U, S. Bureau of Mines under contract to the U. S. Atomic Energy Commission at the Old Leyden coal mine, Jefferson County, Colo. The holes were spotted on the basis of geologic mapping by the U. S. Geological survey and were drilled to explore the lateral and downward extent of a uranium-bearing coal and the associated carnotite deposits in the adjacent sandstone° The data obtained from the diamond-core holes helped to explain the geology and structural control of the deposit. The uranium is most abundant in a coal bed that in places has been brecciated by shearing. and then altered to a hard, dense, and silicified rock. The uraniferous coal is in the nearly vertical beds of the Laramie formation of Upper Cretaceous age. Small lenticular bodies of uraniferous material, 50 feet long, 25 to 30 feet wide, and 2 to 4 feet thick, occur at intervals in the coal and silicified coal over a strike length of about 800 feet. These bodies contain 0.10 to 0.50 percent uranium. Data obtained from the drilling indicate a discontinuous radioactive zone between these higher-grade bodies; assays of samples from the cores range from 0.001 to 0.10 percent uranium. All drill holes were probed by Survey and A. E. C. logging equipment and showed anomalies where the core assayed more than 0.005 percent uranium. Material of ore grade--0.10 percent uranium--was found in one core; the rock in the other five holes was of lower grade. The presence of the radioactive zone in all holes suggests, however, that uranium is distributed irregularly in a southerly plunging deposit which is exposed in the adit, on the outcrop, and in other diamond-drill holes that were put down by the lessee.

  7. Triangular osteosynthesis of vertically unstable sacrum fractures: a new concept allowing early weight-bearing.

    PubMed

    Schildhauer, T A; Josten, Ch; Muhr, G

    2006-01-01

    Presentation of a new triangular osteosynthesis technique that permits early weight-bearing in vertically unstable sacral fractures. : Retrospective evaluation of a consecutive series. Level I trauma center. Thirty-four patients, twenty-eight of whom were poly-traumatized, all with vertically unstable sacral fractures. This group included eight women and twenty-six men, with a mean age of thirty-five years. Average time between trauma and definite operation was thirteen days (range 0 to 28 days). All patients underwent triangular osteosynthesis using a combination of a vertical vertebro-pelvic distraction osteosynthesis (pedicle screw system) and a transverse fixation of the sacrum fracture with either iliosacral screws or trans-sacral plating. Immediate postoperative weight-bearing was permitted postoperatively. Nineteen patients were treated with early progressive weight-bearing and advanced to full weight-bearing, on average, after twenty-three days (range 8 to 70 days). Three of the thirty-four patients (9 percent) experienced loosening of hardware, including two patients (6 percent) who required secondary intervention because of loss of the original reduction. Further complications included one pulmonary embolism (3 percent), one iatrogenic nerve lesion (3 percent), one wound necrosis (3 percent), and two local infections (6 percent). Triangular osteosynthesis is a demanding procedure that can be performed on vertically unstable sacral fractures to allow early progressive weight-bearing with an acceptable complication rate.

  8. Virgin Valley opal district, Humboldt County, Nevada

    USGS Publications Warehouse

    Staatz, Mortimer Hay; Bauer, Herman L.

    1951-01-01

    The Virgin Valley opal district, Humboldt County, Nevada, is near the Oregon-Nevada border in the Sheldon Game Refuge. Nineteen claims owned by Jack and Toni Crane were examined, sampled, and tested radiometrically for uranium. Numerous discontinuous layers of opal are interbedded with a gently-dipping series of vitric tuff and ash which is at least 300 ft thick. The tuff and ash are capped by a dark, vesicular basalt in the eastern part of the area and by a thin layer of terrace qravels in the area along the west side of Virgin Valley. Silicification of the ash and tuff has produced a rock that ranges from partly opalized rock that resembles silicified shale to completely altered rock that is entirely translucent, and consists of massive, brown and pale-green opal. Carnotite, the only identified uranium mineral, occurs as fracture coatings or fine layers in the opal; in places, no uranium minerals are visible in the radioactive opal. The opal layers are irregular in extent and thickness. The exposed length of the layers ranges from 8 to 1, 200 ft or more, and the thickness of the layers ranges from 0. 1 to 3. 9 ft. The uranium content of each opal layer, and of different parts of the same layer, differs widely. On the east side of Virgin Valley four of the seven observed opal layers, nos. 3, 4, 5, and 7, are more radioactive than the average; and the uranium content ranges from 0. 002 to 0. 12 percent. Two samples, taken 5 ft apart across opal layer no. 7, contained 0. 003 and 0. -049 percent uranium. On the west side of the valley only four of the fifteen observed opal layers, nos; 9, , 10, 14, and 15, are more radioactive than the average; and the uranium content ranges from 0. 004 to 0. 047 percent. Material of the highest grade was found in a small discontinuous layer of pale-green opal (no. 4) on the east side of Virgin Valley. The grade of this layer ranged from 0. 027 to 0. 12 percent uranium.

  9. Modeling Reduction of Uranium U(VI) under Variable Sulfate Concentrations by Sulfate-Reducing Bacteria

    PubMed Central

    Spear, John R.; Figueroa, Linda A.; Honeyman, Bruce D.

    2000-01-01

    The kinetics for the reduction of sulfate alone and for concurrent uranium [U(VI)] and sulfate reduction, by mixed and pure cultures of sulfate-reducing bacteria (SRB) at 21 ± 3°C were studied. The mixed culture contained the SRB Desulfovibrio vulgaris along with a Clostridium sp. determined via 16S ribosomal DNA analysis. The pure culture was Desulfovibrio desulfuricans (ATCC 7757). A zero-order model best fit the data for the reduction of sulfate from 0.1 to 10 mM. A lag time occurred below cell concentrations of 0.1 mg (dry weight) of cells/ml. For the mixed culture, average values for the maximum specific reaction rate, Vmax, ranged from 2.4 ± 0.2 μmol of sulfate/mg (dry weight) of SRB · h−1) at 0.25 mM sulfate to 5.0 ± 1.1 μmol of sulfate/mg (dry weight) of SRB · h−1 at 10 mM sulfate (average cell concentration, 0.52 mg [dry weight]/ml). For the pure culture, Vmax was 1.6 ± 0.2 μmol of sulfate/mg (dry weight) of SRB · h−1 at 1 mM sulfate (0.29 mg [dry weight] of cells/ml). When both electron acceptors were present, sulfate reduction remained zero order for both cultures, while uranium reduction was first order, with rate constants of 0.071 ± 0.003 mg (dry weight) of cells/ml · min−1 for the mixed culture and 0.137 ± 0.016 mg (dry weight) of cells/ml · min−1 (U0 = 1 mM) for the D. desulfuricans culture. Both cultures exhibited a faster rate of uranium reduction in the presence of sulfate and no lag time until the onset of U reduction in contrast to U alone. This kinetics information can be used to design an SRB-dominated biotreatment scheme for the removal of U(VI) from an aqueous source. PMID:10966381

  10. Abundances of uranium, thorium, and potassium for some Australian crystalline rocks

    USGS Publications Warehouse

    Bunker, Carl Maurice; Bush, C.A.; Munroe, Robert J.; Sass, J.H.

    1975-01-01

    This report contains a tabulation of the basic radioelement and radiogenic heat data obtained during an Australian National University (ANU) - United States Geological Survey (USGS) heat-flow project, directed jointly by J. C. Jaeger (ANU) and J. H. Sass (USGS). Most samples were collected during the periods June through September, 1971 and 1972. The measurements were made subsequently by two of us (C. M. Bunker and C. A. Bush) using the gamma-ray spec trometric techniques described by Bunker and Bush (1966, 1967). Interpreting the spectra for quantitative analyses of the radioelements was accomplished with an iterative leastsquares computer program modified from one by Schonfeld (1966). Uranium content determined by gamma-ray spectrometry is based on a measurement of the daughter products of 226Ra. Equilibrium in the uranium-decay series was assumed for these analyses . Throughout the report, when U content is stated, radium-equivalent uranium is implied. The coefficient of variation for the accuracy of the radioelement data, when compared to ana lyses by isotope dilution and flame photometry is about 3 percent for radium-equivalent uranium and thorium and about 1 percent for potassium. These percentages are in addition to minimum standard deviations of about 0.05 ppm for U and Th, and about 0.03 percent for K.

  11. Reconnaissance for uranium and thorium in Alaska, 1954

    USGS Publications Warehouse

    Matzko, John J.; Bates, Robert G.

    1957-01-01

    During 1954 reconnaissance investigations to locate minable deposits of uranium and thorium in Alaska were unsuccessful. Areas examined, from which prospectors had submitted radioactive samples, include Cap Yakataga, Kodiak Island, and Shirley Lake. Unconcentrated gravels from the beach at Cape Yakataga average about 0.001 percent equivalent uranium. Uranothorianite has been identified by X-ray diffraction data and is the principal source of radioactivity in the Cape Yakataga beach sands studied; but the zircon, monazite, and uranothorite are also radioactive. The black, opaque uranothorianite generally occurs as minute euhedral cubs, the majority of which will pass through a 100-mesh screen. The bedrock source of the radioactive samples from Kodiak Island was not found; the maximum radioactivity of samples from the Shirley Lake area was equivalent to about 0.02 percent uranium. Radiometric traverses of the 460-foot level of the Garnet shaft of the Nixon Fork mine in the Nixon Fork mining district indicated a maximum of 0.15 mr/hr. In the Hot Springs district, drill hole concentrates of gravels examined contained a maximum of 0.03 percent equivalent uranium. A radioactivity anomaly noted during the Survey's airborne reconnaissance of portions of the Territory during 1954 is located in the Fairhaven district. A ground check disclosed that the radioactivity was due to accessory minerals in the granitic rock.

  12. Geologic report on the Sand Wash Drilling Project, Moffat and Routt Counties, Colorado

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Carter, T.E.; Wayland, T.E.

    1981-09-01

    The Sand Wash Basin Drilling Project comprises twenty-seven (27) drill holes located in Moffat and Routt Counties, northwest Colorado, having an aggregate depth of 26,107.5 feet (7957.6 m). The holes penetrate the Browns Park Formation of Miocene age, which is a tuffaceous continental sandstone deposited in fluvial, eolian, and lacustrine environments. Partly based on project drilling results, uranium potential resource estimates for this formation in the $50/lb U/sub 3/O/sub 8/ forward-cost category have been increased by 34,476 tons U/sub 3/O/sub 8/ (35,036 metric tons). Three areas between Maybell and Craig, Colorado, considered favorable for uranium occurrences were verified as favorablemore » by project drilling, and a fourth favorable area northwest of Maybell has been expanded. In addition, project drilling results indicate two new favorable areas, one north and northwest and one south of Steamboat Springs, Colorado. Anomalous radioactivity was detected in drill holes in all six study areas of the project. The most important factor in concentrating significant amounts of uranium in the target formation appears to be the availability of gaseous or liquid hydrocarbons and/or hydrogen sulfide gas as reductants. Where subjacent formations supply these reductants to the Browns Park Formation, project drilling encountered 0.05 percent to 0.01 percent uranium concentrations. Potential, though unproven, sources of these reductants are believed to underlie parts of all six project study areas.« less

  13. Hydrologic transport of depleted uranium associated with open air dynamic range testing at Los Alamos National Laboratory, New Mexico, and Eglin Air Force Base, Florida

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Becker, N.M.; Vanta, E.B.

    Hydrologic investigations on depleted uranium fate and transport associated with dynamic testing activities were instituted in the 1980`s at Los Alamos National Laboratory and Eglin Air Force Base. At Los Alamos, extensive field watershed investigations of soil, sediment, and especially runoff water were conducted. Eglin conducted field investigations and runoff studies similar to those at Los Alamos at former and active test ranges. Laboratory experiments complemented the field investigations at both installations. Mass balance calculations were performed to quantify the mass of expended uranium which had transported away from firing sites. At Los Alamos, it is estimated that more thanmore » 90 percent of the uranium still remains in close proximity to firing sites, which has been corroborated by independent calculations. At Eglin, we estimate that 90 to 95 percent of the uranium remains at test ranges. These data demonstrate that uranium moves slowly via surface water, in both semi-arid (Los Alamos) and humid (Eglin) environments.« less

  14. 77 FR 54900 - Aluminum Extrusions From the People's Republic of China: Final Results of Changed Circumstances...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-06

    ..., with manganese accounting for not more than 3.0 percent of total materials by weight. The subject... number 6 contains magnesium and silicon as the major alloying elements, with magnesium accounting for at least 0.1 percent but not more than 2.0 percent of total materials by weight, and silicon accounting for...

  15. Uranium-bearing copper deposits in the Coyote district, Mora County, New Mexico

    USGS Publications Warehouse

    Zeller, H.D.; Baltz, Elmer Harold

    1954-01-01

    Uranium-bearing copper deposits occur in steeply dipping beds of the Sangre de Cristo formation of Pennsylvanian and Permian(?) age south of Coyote, Mora County, N. Mex. Mapping and sampling of these deposits indicate that they are found in lenticular carbonaceous zones in shales and arkosic sandstones. Samples from these zones contain as much as 0.067 percent uranium and average 3 percent copper. Metatyuyamunite is dissemihatedin some of the arkosic sandstone beds, and uraninite is present in some of the copper sulfide nodules occurring in the shale. These sulfide nodules are composed principally of chalcocite but include some bornite, covellite, pyrite, and malachite. Most of the samples were collected near the surface from the weathered zone. The copper and uranium were probably deposited with the sediments and concentrated into zones during compaction and lithification. Carbonaceous material in the Sangre de Cristo formation provided the environment that precipitated uranium and copper from mineral-charged connate waters forced from the clayey sediments.

  16. Examining behavioral processes through which lifestyle interventions promote weight loss: results from PREMIER.

    PubMed

    Fitzpatrick, Stephanie L; Bandeen-Roche, Karen; Stevens, Victor J; Coughlin, Janelle W; Rubin, Richard R; Brantley, Phillip J; Funk, Kristine L; Svetkey, Laura P; Jerome, Gerald J; Dalcin, Arlene; Charleston, Jeanne; Appel, Lawrence J

    2014-04-01

    To examine the behavioral processes through which lifestyle interventions impacted weight loss. The analyses were limited to overweight and obese Black and White adults randomized to a PREMIER lifestyle intervention (N = 501). Structural equation modeling was conducted to test the direct and indirect relationships of session attendance, days of self-monitoring diet and exercise, change in diet composition and exercise, and 6-month weight change. Greater session attendance was associated with increased self-monitoring, which was in turn significantly related to reduction in percent energy from total fat consumed. Change in percent energy from fat and self-monitoring was associated with 6-month percent change in weight. Both a decrease in fat intake and increase in self-monitoring are potential mediators of the relationship between attendance and weight change. The findings provide a reasonable model that suggests regular session attendance and use of behavioral strategies like self-monitoring are associated with improved behavioral outcomes that are associated with weight loss. Copyright © 2013 The Obesity Society.

  17. HIGH DENSITY NUCLEAR FUEL COMPOSITION

    DOEpatents

    Litton, F.B.

    1962-07-17

    ABS>A nuclear fuel consisting essentially of uranium monocarbide and containing 2.2 to 4.6 wt% carbon, 0.1 to 2.3 wt% oxygen, 0.05 to 2.5 wt% nitrogen, and the balance uranium was developed. The maximum oxygen content was less than one-half the carbon content by weight and the carbon, oxygen, and nitrogen are present as a single phase substituted solid solution of UC, C, O, and N. A method of preparing the fuel composition is described. (AEC)

  18. Ultraviolet-B radiation mobilizes uranium from uranium-dissolved organic carbon complexes in aquatic systems, demonstrated by asymmetrical flow field-flow fractionation.

    PubMed

    Nehete, Sachin Vilas; Christensen, Terje; Salbu, Brit; Teien, Hans-Christian

    2017-05-05

    Humic substances have a tendency to form complexes with metal ions in aquatic medium, impacting the metal mobility, decreasing bioavailability and toxicity. Ultraviolet-B (UV-B) radiation exposure degrades the humic substance, changes their molecular weight distribution and their metal binding capacity in aquatic medium. In this study, we experimented the effect of UV-B radiation on the uranium complexed with fulvic acids and humic acids in a soft water system at different pH, uranium concentrations and radiant exposure. The concentration and distribution of uranium in a complexed form were investigated by asymmetrical flow field-flow fractionation coupled to multi detection technique (AsFlFFF-UV-ICP-MS). The major concentration of uranium present in complexes was primarily associated with average and higher molecular weight fulvic and humic acids components. The concentration of uranium in a complexed form increased with increasing fulvic and humic acid concentrations as well as pH of the solution. The higher molecular weight fraction of uranium was degraded due to the UV-B exposure, transforming about 50% of the uranium-dissolved organic carbon complexes into low molecular weight uranium species in complex form with organic ligands and/or free form. The result also suggests AsFlFFF-UV-ICP-MS to be an important separation and detection technique for understanding the interaction of radionuclides with dissolved organic matter, tracking size distribution changes during degradation of organic complexes for understanding mobility, bioavailability and ecosystem transfer of radionuclides as well as metals. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Nondestructive assay of EBR-II blanket elements using resonance transmission analysis

    NASA Astrophysics Data System (ADS)

    Klann, Raymond Todd

    1998-10-01

    Resonance transmission analysis utilizing a filtered reactor beam was examined as a means of determining the 239Pu content in Experimental Breeder Reactor - II depleted uranium blanket elements. The technique uses cadmium and gadolinium filters along with a 239Pu fission chamber to isolate the 0.3 eV resonance in 239Pu. In the energy range of this resonance (0.1 eV to 0.5 eV), the total microscopic cross-section of 239Pu is significantly greater than the cross- sections of 238U and 235U. This large difference allows small changes in the 239Pu content of a sample to result in large changes in the mass signal response. Tests with small stacks of depleted uranium and 239Pu foils indicate a significant change in response based on the 239Pu content of the foil stack. In addition, the tests indicate good agreement between the measured and predicted values of 239Pu up to approximately two weight percent.

  20. Weight outcomes audit for 34,271 adults referred to a primary care/commercial weight management partnership scheme.

    PubMed

    Stubbs, R James; Pallister, Carolyn; Whybrow, Stephen; Avery, Amanda; Lavin, Jacquie

    2011-01-01

    This project audited rate and extent of weight loss in a primary care/commercial weight management organisation partnership scheme. 34,271 patients were referred to Slimming World for 12 weekly sessions. Data were analysed using individual weekly weight records. Average (SD) BMI change was -1.5 kg/m² (1.3), weight change -4.0 kg (3.7), percent weight change -4.0% (3.6), rate of weight change -0.3 kg/week, and number of sessions attended 8.9 (3.6) of 12. For patients attending at least 10 of 12 sessions (n = 19,907 or 58.1%), average (SD) BMI change was -2.0 kg/m² (1.3), weight change -5.5 kg (3.8), percent weight change -5.5% (3.5), rate of weight change -0.4 kg/week, and average number of sessions attended was 11.5 (0.7) (p < 0.001, compared to all patients). Weight loss was greater in men (n = 3,651) than in women (n = 30,620) (p < 0.001). 35.8% of all patients enrolled and 54.7% in patients attending 10 or more sessions achieved at least 5% weight loss. Weight gain was prevented in 92.1% of all patients referred. Attendance explained 29.6% and percent weight lost in week 1 explained 18.4% of the variance in weight loss. Referral to a commercial organisation is a practical option for National Health Service (NHS) weight management strategies, which achieves clinically safe and effective weight loss. Copyright © 2011 S. Karger AG, Basel.

  1. Statistical sampling of the distribution of uranium deposits using geologic/geographic clusters

    USGS Publications Warehouse

    Finch, W.I.; Grundy, W.D.; Pierson, C.T.

    1992-01-01

    The concept of geologic/geographic clusters was developed particularly to study grade and tonnage models for sandstone-type uranium deposits. A cluster is a grouping of mined as well as unmined uranium occurrences within an arbitrary area about 8 km across. A cluster is a statistical sample that will reflect accurately the distribution of uranium in large regions relative to various geologic and geographic features. The example of the Colorado Plateau Uranium Province reveals that only 3 percent of the total number of clusters is in the largest tonnage-size category, greater than 10,000 short tons U3O8, and that 80 percent of the clusters are hosted by Triassic and Jurassic rocks. The distributions of grade and tonnage for clusters in the Powder River Basin show a wide variation; the grade distribution is highly variable, reflecting a difference between roll-front deposits and concretionary deposits, and the Basin contains about half the number in the greater-than-10,000 tonnage-size class as does the Colorado Plateau, even though it is much smaller. The grade and tonnage models should prove useful in finding the richest and largest uranium deposits. ?? 1992 Oxford University Press.

  2. The Olympic Dam copper-uranium-gold deposit, Roxby Downs, South Australia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Roberts, D.E.; Hudson, G.R.T.

    1983-08-01

    The Olympic Dam copper-uranium-gold deposit appears to be a new type of strata-bound sediment-hosted ore deposit. It is located 650 km north-northwest of Adelaide in South Australia and was discovered in 1975. It has an areal extent exceeding 20 km/sup 2/ with vertical thicknesses of mineralization up to 350 m. The deposit is estimated to contain in excess of 2,000 million metric tons of mineralized material with an average grade of 1.6 percent copper, 0.06 percent uranium oxide, and 0.6 g/metric ton gold. The deposit occurs in the basement beneath 350 m of unmineralized, flat-lying Adelaidean (late Proterozoic) to Cambrianmore » sediments in the Stuart shelf region of South Australia. The host rocks of the deposit are unmetamorphosed and are probably younger than 1,580 m.y. The deposit is spatially related to coincident gravity and magnetic anomalies and the intersection of west-northwest- and north-northwest-trending lineaments. The Proterozoic sediments comprising the local basement sequence are predominantly sedimentary breccias ranging from matrix-poor granite breccias to matrix-rich polymict breccias containing clasts of a variety of rock types. This sequence is over 1 km thick and has been divided into two main units--the Olympic Dam Formation and the Greenfield Formation. The Olympic Dam Formation has five members, three of which are matrix rich. The Greenfield Formation has three members, the lower two being very hematite rich while the upper has a significant volcanic component. Pervasive hematite, chlorite, and sericite alteration of varying intensity affects all the basement sequence.« less

  3. Describing patterns of weight changes using principal components analysis: results from the Action for Health in Diabetes (Look AHEAD) research group.

    PubMed

    Espeland, Mark A; Bray, George A; Neiberg, Rebecca; Rejeski, W Jack; Knowler, William C; Lang, Wei; Cheskin, Lawrence J; Williamson, Don; Lewis, C Beth; Wing, Rena

    2009-10-01

    To demonstrate how principal components analysis can be used to describe patterns of weight changes in response to an intensive lifestyle intervention. Principal components analysis was applied to monthly percent weight changes measured on 2,485 individuals enrolled in the lifestyle arm of the Action for Health in Diabetes (Look AHEAD) clinical trial. These individuals were 45 to 75 years of age, with type 2 diabetes and body mass indices greater than 25 kg/m(2). Associations between baseline characteristics and weight loss patterns were described using analyses of variance. Three components collectively accounted for 97.0% of total intrasubject variance: a gradually decelerating weight loss (88.8%), early versus late weight loss (6.6%), and a mid-year trough (1.6%). In agreement with previous reports, each of the baseline characteristics we examined had statistically significant relationships with weight loss patterns. As examples, males tended to have a steeper trajectory of percent weight loss and to lose weight more quickly than women. Individuals with higher hemoglobin A(1c) (glycosylated hemoglobin; HbA(1c)) tended to have a flatter trajectory of percent weight loss and to have mid-year troughs in weight loss compared to those with lower HbA(1c). Principal components analysis provided a coherent description of characteristic patterns of weight changes and is a useful vehicle for identifying their correlates and potentially for predicting weight control outcomes.

  4. Weight outcomes audit in 1.3 million adults during their first 3 months' attendance in a commercial weight management programme.

    PubMed

    Stubbs, R James; Morris, Liam; Pallister, Carolyn; Horgan, Graham; Lavin, Jacquie H

    2015-09-10

    Over sixty percent of adults in the UK are now overweight/obese. Weight management on a national scale requires behavioural and lifestyle solutions that are accessible to large numbers of people. Evidence suggests commercial weight management programmes help people manage their weight but there is little research examining those that pay to attend such programmes rather than being referred by primary care. The objective of this analysis was to evaluate the effectiveness of a UK commercial weight management programme in self-referred, fee-paying participants. Electronic weekly weight records were collated for self-referred, fee-paying participants of Slimming World groups joining between January 2010 and April 2012. This analysis reports weight outcomes in 1,356,105 adult, non-pregnant participants during their first 3 months' attendance. Data were analysed by regression, ANOVA and for binomial outcomes, chi-squared tests using the R statistical program. Mean (SD) age was 42.3 (13.6) years, height 1.65 m (0.08) and start weight was 88.4 kg (18.8). Mean start BMI was 32.6 kg/m(2) (6.3 kg/m(2)) and 5 % of participants were men. Mean weight change of all participants was -3.9 kg (3.6), percent weight change -4.4 (3.8), and BMI change was -1.4 kg/m(2) (1.3). Mean attendance was 7.8 (4.3) sessions in their first 3 months. For participants attending at least 75 % of possible weekly sessions (n = 478,772), mean BMI change was -2.5 kg/m(2) (1.3), weight change -6.8 kg (3.7) and percent weight change -7.5 % (3.5). Weight loss was greater in men than women absolutely (-6.5 (5.3) kg vs -3.8 (3.4) kg) and as a percentage (5.7 % (4.4) vs 4.3 % (3.7)), respectively. All comparisons were significant (p < 0.001). Level of attendance and percent weight loss in the first week of attendance together accounted for 55 % of the variability in weight lost during the study period. A large-scale commercial lifestyle-based weight management programme had a significant impact on weight loss outcomes over 3 months. Higher levels of attendance led to levels of weight loss known to be associated with significant clinical benefits, which on this scale may have an impact on public health.

  5. Effect of moisture loss on red oak sawlog weight

    Treesearch

    Edward L. Adams

    1971-01-01

    A study was made to determine the effect of moisture loss on the weights of red oak sawlogs. The logs, ranging from 9 to 21 inches in scaling diameter and from 8 to 14 feet in length, were dried for a 12-week period. The 21-log sample lost 7.6 percent of the total green sawlog weight. The weight loss for individual logs ranged from 5.3 to 14.5 percent. In general, as...

  6. Can body mass index predict percent body fat and changes in percent body fat with weight loss in bariatric surgery patients?

    PubMed

    Carey, Daniel G; Raymond, Robert L

    2008-07-01

    The primary objective of this study was to assess the validity of body mass index (BMI) in predicting percent body fat and changes in percent body fat with weight loss in bariatric surgery patients. Twenty-two bariatric patients (17 female, five male) began the study designed to include 12 months of testing, including data collection within 1 week presurgery and 1 month, 3 months, 6 months, and 1 year postsurgery. Five female subjects were lost to the study between 6 months and 12 months postsurgery, resulting in 17 subjects (12 female, five male) completing the 12 months of testing. Variables measured in the study included height, weight, percent fat (% fat) by hydrostatic weighing, lean mass, fat mass, and basal metabolic rate. Regression analyses predicting % fat from BMI yielded the following results: presurgery r = 0.173, p = 0.479, standard error of estimate (SEE) = 3.86; 1 month r = 0.468, p = 0.043, SEE = 4.70; 3 months r = 0.553, p = 0.014, SEE = 6.2; 6 months r = 0.611, p = 0.005, SEE = 5.88; 12 months r = 0.596, p = 0.007, SEE = 7.13. Regression analyses predicting change in % fat from change in BMI produced the following results: presurgery to 1 month r = -0.134, p = 0.583, SEE = 2.44%; 1-3 months r = 0.265, p = 0.272, SEE = 2.36%; 3-6 months r = 0.206, p = 0.398, SEE = 3.75%; 6-12 months r = 0.784, p = 0.000, SEE = 3.20. Although some analyses resulted in significant correlation coefficients (p < 0.05), the relatively large SEE values would preclude the use of BMI in predicting % fat or change in % fat with weight loss in bariatric surgery patients.

  7. The discovery and character of Pleistocene calcrete uranium deposits in the Southern High Plains of west Texas, United States

    USGS Publications Warehouse

    Van Gosen, Bradley S.; Hall, Susan M.

    2017-12-18

    This report describes the discovery and geology of two near-surface uranium deposits within calcareous lacustrine strata of Pleistocene age in west Texas, United States. Calcrete uranium deposits have not been previously reported in the United States. The west Texas uranium deposits share characteristics with some calcrete uranium deposits in Western Australia—uranium-vanadium minerals hosted by nonpedogenic calcretes deposited in saline lacustrine environments.In the mid-1970s, Kerr-McGee Corporation conducted a regional uranium exploration program in the Southern High Plains province of the United States, which led to the discovery of two shallow uranium deposits (that were not publicly reported). With extensive drilling, Kerr-McGee delineated one deposit of about 2.1 million metric tons of ore with an average grade of 0.037 percent U3O8 and another deposit of about 0.93 million metric tons of ore averaging 0.047 percent U3O8.The west-Texas calcrete uranium-vanadium deposits occur in calcareous, fine-grained sediments interpreted to be deposited in saline lakes formed during dry interglacial periods of the Pleistocene. The lakes were associated with drainages upstream of a large Pleistocene lake. Age determinations of tephra in strata adjacent to one deposit indicate the host strata is middle Pleistocene in age.Examination of the uranium-vanadium mineralization by scanning-electron microscopy indicated at least two generations of uranium-vanadium deposition in the lacustrine strata identified as carnotite and a strontium-uranium-vanadium mineral. Preliminary uranium-series results indicate a two-component system in the host calcrete, with early lacustrine carbonate that was deposited (or recrystallized) about 190 kilo-annum, followed much later by carnotite-rich crusts and strontium-uranium-vanadium mineralization in the Holocene (about 5 kilo-annum). Differences in initial 234U/238U activity ratios indicate two separate, distinct fluid sources.

  8. Removal of uranium from soil sample digests for ICP-OES analysis of trace metals

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Foust, R.D. Jr.; Bidabad, M.

    1996-10-01

    An analytical procedure has been developed to quantitatively remove uranium from soil sample digests, permitting ICP-OES analysis of trace metals. The procedure involves digesting a soil sample with standard procedures (EPA SW-846, Method 3050), and passing the sample digestate through commercially available resin (U/TEVA{sm_bullet}Spec, Eichrom Industries, Inc.) containing diarryl amylphosphonate as the stationary phase. Quantitative removal of uranium was achieved with soil samples containing up to 60% uranium, and percent recoveries averaged better than 85% for 9 of the 10 metals evaluated (Ag, As, Cd. Cr, Cu, Ni, Pb, Se and Tl). The U/TEVA{sm_bullet}Spec column was regenerated by washing withmore » 200 mL of a 0.01 M oxalic acid/0.02 M nitric acid solution, permitting re-use of the column. GFAAS analysis of a sample spiked with 56.5% uranium, after treatment of the digestate with a U/TEVA{sm_bullet}Spec resin column, resulted in percent recoveries of 97% or better for all target metals.« less

  9. More About High-Temperature Resistance Strain Gauges

    NASA Technical Reports Server (NTRS)

    Englund, D. R.; Williams, W. D.; Lei, Jih-Fen; Hulse, C. O.

    1994-01-01

    Two reports present additional information on electrical-resistance strain gauges described in "High-Temperature Resistance Strain Gauges" (LEW-15379). For protection against oxidation at high temperatures, gauges covered, by flame spraying, with coats of alumina containing up to 1 weight percent of yttria or, perferably, containing 4 to 6 weight percent of zirconia.

  10. Release of U(VI) from spent biosorbent immobilized in cement concrete blocks

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Venkobachar, C.; Iyengar, L.; Mishra, U.K.

    1995-12-01

    This paper deals with cementation as the method for the disposal of spent biosorbent, Ganoderma lucidum (a wood rotting macrofungi) after it is used for the removal of Uranium. Results on the uranium release during the curing of cement-concrete (CC) blocks indicated that placing the spent sorbent at the center of the blocks during their casting yields better immobilization of uranium as compared to the homogeneous mixing of the spent sorbent with the cement. Short term leach tests indicated that the uranium release was negligible in simulated seawater, 1.8% in 0.2 N sodium carbonate and 6.0% in 0.2 N HCl.more » The latter two leachates were used to represent the extreme environmental conditions. It was observed that the presence of the spent biosorbent up to 5% by weight did not affect the compressive strength of CC blocks. Thus cementation technique is suitable for the immobilization of uranium loaded biosorbent for its ultimate disposal.« less

  11. Descriptive and grade-tonnage models of volcanogenic manganese deposits in oceanic environments; a modification

    USGS Publications Warehouse

    Mosier, Dan L.; Page, Norman J

    1988-01-01

    Four types of volcanogenic manganese deposits, distinguished on the basis of geologic, geochemical, and geophysical characteristics, appear to result from a combination of volcanic and hydrothermal processes related to hot-spring activity in oceanic environments. We compare these four desposit types, here called the Franciscan, Cuban, Olympic Peninsula, and Cyprus, with respect to host rocks, associated rocks, minerals, deposit shape, dimensions, volume, tonnage, grade, and mineral-deposit density (number of deposits per unit area). Franciscan-type deposits occur in obducted oceanic ridge and backarc marginal-basin environments, are associated with chert, shale, and graywacke aroun the margins of mafic volcanic centers, and have a median tonnage of 450 t and median grades of 36 weight percent Mn and less than 5.1 weight percent Fe. Cuban-type deposits occur in island-arc environments, are associated with tuff and limestone around domal structures or intrusions inferred to be volcanic centers, and have a median tonnage of 6,400 t and median grades of 39 weight percent Mn and less than 4.4 weight percent Fe. Olympic Peninsula-type deposits occur in obducted oceanic midplate settings, are associated with argillaceous limestone, argillite, and graywacke around mafic volcanic centers (seamounts or islands), and have a median tonnage of 340 t and median grades of 35 weight percent Mn and less than 6.5 weight percent Fe. Cyprus-type deposits occur in the same tectonic environments as Franciscan type but are associated with basalt, marl, chalk, silt, and chert off the ridge-axis position and have a median tonnage of 41,000 t and median grades of 33 weight percent Fe and 8 weight percent Mn. All these deposits are thin ellipsoids, concordant to the host rocks, but Cyprus-and Cuban-type deposits are larger than Franciscan- and Olympic Peninsula-type deposits. Except for Cyprus-type deposits, which are manganiferous iron (umber) deposits composed of hydrated iron and manganese oxides, all volcanogenic manganese deposits contain manganese oxides, silicates, and carbonates. Mineral-deposit densities, along with grade and tonnage information, are useful for estimating the number, size, andgrades of these deposits in resource assessments.

  12. Electrolytes for Low Impedance, Wide Operating Temperature Range Lithium-Ion Battery Module

    NASA Technical Reports Server (NTRS)

    Hallac, Boutros (Inventor); Krause, Frederick C. (Inventor); Jiang, Junwei (Inventor); Smart, Marshall C. (Inventor); Metz, Bernhard M. (Inventor); Bugga, Ratnakumar V. (Inventor)

    2018-01-01

    A lithium ion battery cell includes a housing, a cathode disposed within the housing, wherein the cathode comprises a cathode active material, an anode disposed within the housing, wherein the anode comprises an anode active material, and an electrolyte disposed within the housing and in contact with the cathode and anode. The electrolyte consists essentially of a solvent mixture, a lithium salt in a concentration ranging from approximately 1.0 molar (M) to approximately 1.6 M, and an additive mixture. The solvent mixture includes a cyclic carbonate, an non-cyclic carbonate, and a linear ester. The additive mixture consists essentially of lithium difluoro(oxalato)borate (LiDFOB) in an amount ranging from approximately 0.5 weight percent to approximately 2.0 weight percent based on the weight of the electrolyte, and vinylene carbonate (VC) in an amount ranging from approximately 0.5 weight percent to approximately 2.0 weight percent based on the weight of the electrolyte.

  13. Effects of uranium mining, Puerco River, New Mexico

    USGS Publications Warehouse

    Lopes, Thomas J.

    1991-01-01

    Effluent from uranium-mine dewatering and acidic water released by a tailings-pond dike failure increased radionuclide activities in streamflow in the Puerco River in New Mexico and Arizona. Median dissolved gross-alpha activity in the streamflow was 1,130 picocuries per liter from 1975 to 1986 when mine discharges ceased and 6.2 picocuries per liter from 1986 to 1989. From 1975 to July 1979, major ions in streamflow at the Puerco River at Gallup streamflow-gaging station were sodium, bicarbonate, and sulfate. On July 16, 1979, the day of the tailing spill, major ions in streamflow were magnesium, calcium, and sulfate. From 1979 to 1984, major ions in streamflow had a greater proportion of calcium and sulfate than prior to the spill, indicating flushing of residual tailings solution. Geochemical modeling of mine effluent indicates that uranium was unlikely to precipitate from effluent between the mines and Gallup or when mixed with wastewater downstream from Gallup. Geochemical modeling of acidic-tailings solution indicates that uranium was in solution as far downstream as Gallup. When the acidic-tailings solution mixed with 10- to 40-percent wastewater, uranium may have precipitated from solution as carnotite [K2(UO2)2(VO4)2] and tyuyamunite [Ca(UO2)2(VO4)2].

  14. Ground-water quality and geochemistry in Carson and Eagle Valleys, western Nevada and eastern California

    USGS Publications Warehouse

    Welch, Alan H.

    1994-01-01

    Aquifers in Carson and Eagle Valleys are an important source of water for human consumption and agriculture. Concentrations of major constituents in water from the principal aquifers on the west sides of Carson and Eagle Valleys appear to be a result of natural geochemical reactions with minerals derived primarily from plutonic rocks. In general, water from principal aquifers is acceptable for drinking when compared with current (1993) Nevada State drinking-water maximum contaminant level standards. Water was collected and analyzed for all inorganic constituents for which primary or secondary drinking-water standards have been established. About 3 percent of these sites had con- stituents that exceeded one or more primary or secondary drinking-water standards have been established. About 3 percent of these sites had con- stituents that exceeded one or more primary standards and water at about 10 percent of the sites had at least one constituent that surpassed a secondary standard. Arsenic exceeded the standard in water at less than 1 percent of the principal aquifer sites; nitrate surpassed its standard in water at 3 percent of 93 sites. Water from wells in the principal aquifer with high concentrations of nitrate was in areas where septic systems are used; these concentrations indicate that contamination may be entering the wells. Concentrations of naturally occurring radionuclides in water from the principal aquifers, exceed the proposed Federal standards for some constituents, but were not found t be above current (1993) State standards. The uranium concen- trations exceeded the proposed 20 micrograms per liter Federal standard at 10 percent of the sites. Of the sites analyzed for all of the inorganic constituents with primary standards plus uranium, 15 percent exceed one or more established standards. If the proposed 20 micrograms per liter standard for uranium is applied to the sampled sites, then 23 percent would exceed the standard for uranium or some other constituent with a primary drinking water standard. This represents a 50-percent increase in the frequency of exceedance. Almost all water sampled from the principal aquifers exceeds the 300 picocuries per liter proposed standard for radon. Ground-water sampling sites with the highest radon activities in water are most commonly located in the upland aquifers in the Sierra Nevada and in the principal aquifers beneath the west sides of Carson and Eagle Valleys.

  15. Hydrothermal Testing of K Basin Sludge and N Reactor Fuel at Sludge Treatment Project Operating Conditions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Delegard, Calvin H.; Schmidt, Andrew J.; Thornton, Brenda M.

    The Sludge Treatment Project (STP), managed for the U. S. DOE by Fluor Hanford (FH), was created to design and operate a process to eliminate uranium metal from K Basin sludge prior to packaging for Waste Isolation Pilot Plant (WIPP). The STP process uses high temperature liquid water to accelerate the reaction, produce uranium dioxide from the uranium metal, and safely discharge the hydrogen. Under nominal process conditions, the sludge will be heated in pressurized water at 185°C for as long as 72 hours to assure the complete reaction (corrosion) of up to 0.25-inch diameter uranium metal pieces. Under contractmore » to FH, the Pacific Northwest National Laboratory (PNNL) conducted bench-scale testing of the STP hydrothermal process in November and December 2006. Five tests (~50 ml each) were conducted in sealed, un-agitated reaction vessels under the hydrothermal conditions (e.g., 7 to 72 h at 185°C) of the STP corrosion process using radioactive sludge samples collected from the K East Basin and particles/coupons of N Reactor fuel also taken from the K Basins. The tests were designed to evaluate and understand the chemical changes that may be occurring and the effects that any changes would have on sludge rheological properties. The tests were not designed to evaluate engineering aspects of the process. The hydrothermal treatment affected the chemical and physical properties of the sludge. In each test, significant uranium compound phase changes were identified, resulting from dehydration and chemical reduction reactions. Physical properties of the sludge were significantly altered from their initial, as-settled sludge values, including, shear strength, settled density, weight percent water, and gas retention.« less

  16. Uranium in the Upper Cambrian black shale of Sweden

    USGS Publications Warehouse

    McKelvey, Vincent Ellis

    1955-01-01

    The Peltura zone of the Upper Cambrian black shales of Sweden contains about 0.02 percent uranium. Maximum amounts are present in rocks deposited in an embayment in the sea and in rocks in or closely adjacent to that part of the vertical sequence that contains maximum amounts of distillable oil, total organic matter, pyrite, and a black highly uraniferous kerogen called "kolm". Available data suggest that the precipitation of uranium is favored by a low redox potential and that the uranium in the shale matrix may be in fine-grained kolm.

  17. The effect of weight change on changes in breast density measures over menopause in a breast cancer screening cohort.

    PubMed

    Wanders, Johanna Olga Pauline; Bakker, Marije Fokje; Veldhuis, Wouter Bernard; Peeters, Petra Huberdina Maria; van Gils, Carla Henrica

    2015-05-30

    High weight and high percentage mammographic breast density are both breast cancer risk factors but are negatively correlated. Therefore, we wanted to obtain more insight into this apparent paradox. We investigated in a longitudinal study how weight change over menopause is related to changes in mammographic breast features. Five hundred ninety-one participants of the EPIC-NL cohort were divided into three groups according to their prospectively measured weight change over menopause: (1) weight loss (more than -3.0 %), (2) stable weight (between -3.0 % and +3.0 %), and (3) weight gain (more than 3.0 %). SPSS GLM univariate analysis was used to determine both the mean breast measure changes in, and the trend over, the weight change groups. Over a median period of 5 years, the mean changes in percent density in these groups were -5.0 % (95 % confidence interval (CI) -8.0; -2.1), -6.8 % (95 % CI -9.0; -4.5), and -10.2 % (95 % CI -12.5; -7.9), respectively (P-trend = 0.001). The mean changes in dense area were -16.7 cm(2) (95 % CI -20.1; -13.4), -16.4 cm(2) (95 % CI -18.9; -13.9), and -18.1 cm(2) (95 % CI -20.6; -15.5), respectively (P-trend = 0.437). Finally, the mean changes in nondense area were -6.1 cm(2) (95 % CI -11.9; -0.4), -0.6 cm(2) (95 % CI -4.9; 3.8), and 5.3 cm(2) (95 % CI 0.9; 9.8), respectively (P-trend < 0.001). Going through menopause is associated with a decrease in both percent density and dense area. Owing to an increase in the nondense tissue, the decrease in percent density is largest in women who gain weight. The decrease in dense area is not related to weight change. So the fact that both high percent density and high weight or weight gain are associated with high postmenopausal breast cancer risk can probably not be explained by an increase (or slower decrease) of dense area in women gaining weight compared with women losing weight or maintaining a stable weight. These results suggest that weight and dense area are presumably two independent postmenopausal breast cancer risk factors.

  18. Analysis of Tank 38H (HTF-38-16-26, 27) and Tank 43H (HTF-43-16-28, 29) Samples for Support of the Enrichment Control and Corrosion Control Programs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hay, M. S.

    Savannah River National Laboratory analyzed samples from Tank 38H and Tank 43H to support Enrichment Control Program and Corrosion Control Program. The total uranium in the Tank 38H samples ranged from 20.5 to 34.0 mg/L while the Tank 43H samples ranged from 47.6 to 50.6 mg/L. The U-235 percentage ranged from 0.62% to 0.64% over the four samples. The total uranium and percent U-235 results appear consistent with previous Tank 38H and Tank 43H uranium measurements. The Tank 38H plutonium results show a large difference between the surface and sub-surface sample concentrations and a somewhat higher concentration than previous sub-surfacemore » samples. The two Tank 43H samples show similar plutonium concentrations and are within the range of values measured on previous samples. The plutonium results may be biased high due to the presence of plutonium contamination in the blank samples from the cell sample preparations. The four samples analyzed show silicon concentrations ranging from 47.9 to 105 mg/L.« less

  19. Out-of-core Evaluations of Uranium Nitride-fueled Converters

    NASA Technical Reports Server (NTRS)

    Shimada, K.

    1972-01-01

    Two uranium nitride fueled converters were tested parametrically for their initial characterization and are currently being life-tested out of core. Test method being employed for the parametric and the diagnostic measurements during the life tests, and test results are presented. One converter with a rhenium emitter had an initial output power density of 6.9 W/ sq cm at the black body emitter temperature of 1900 K. The power density remained unchanged for the first 1000 hr of life test but degraded nearly 50% percent during the following 1000 hr. Electrode work function measurements indicated that the uranium fuel was diffusing out of the emitter clad of 0.635 mm. The other converter with a tungsten emitter had an initial output power density of 2.2 W/ sq cm at 1900 K with a power density of 3.9 W/sq cm at 4300 h. The power density suddenly degraded within 20 hr to practically zero output at 4735 hr.

  20. The Feasibility of Ending HEU Fuel Use in the U.S. Navy

    DOE PAGES

    Philippe, Sebastian; von Hippel, Frank

    2016-11-01

    We report that since September 11, 2001, the U.S. government has sought to remove weapons-useable highly enriched uranium (HEU) containing 20 percent or more uranium-235 from as many locations as possible because of concerns about the possibility of nuclear terrorism.

  1. Mechanical Behavior of Additively Manufactured Uranium-6 wt. pct. Niobium

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wu, A. S.; Wraith, M. W.; Burke, S. C.

    This report describes an effort to process uranium-6 weight% niobium using laser powder bed fusion. The chemistry, crystallography, microstructure and mechanical response resulting from this process are discussed with particular emphasis on the effect of the laser powder bed fusion process on impurities. In an effort to achieve homogenization and uniform mechanical behavior from different builds, as well as to induce a more conventional loading response, we explore post-processing heat treatments on this complex alloy. Elevated temperature heat treatment for recrystallization is evaluated and the effect of recrystallization on mechanical behavior in laser powder bed fusion processed U-6Nb is discussed.more » Wrought-like mechanical behavior and grain sizes are achieved through post-processing and are reported herein.« less

  2. Feasibility study of a small, thorium-based fission power system for space and terrestrial applications

    NASA Astrophysics Data System (ADS)

    Worrall, Michael Jason

    One of the current challenges facing space exploration is the creation of a power source capable of providing useful energy for the entire duration of a mission. Historically, radioisotope batteries have been used to provide load power, but this conventional system may not be capable of sustaining continuous power for longer duration missions. To remedy this, many forays into nuclear powered spacecraft have been investigated, but no robust system for long-term power generation has been found. In this study, a novel spin on the traditional fission power system that represents a potential optimum solution is presented. By utilizing mature High Temperature Gas Reactor (HTGR) technology in conjunction with the capabilities of the thorium fuel cycle, we have created a light-weight, long-term power source capable of a continuous electric power output of up to 70kW for over 15 years. This system relies upon a combination of fissile, highly-enriched uranium dioxide and fertile thorium carbide Tri-Structural Isotropic (TRISO) fuel particles embedded in a hexagonal beryllium oxide matrix. As the primary fissile material is consumed, the fertile material breeds new fissile material leading to more steady fuel loading over the lifetime of the core. Reactor control is achieved through an innovative approach to the conventional boron carbide neutron absorber by utilizing sections of borated aluminum placed in rotating control drums within the reflector. Borated aluminum allows for much smaller boron concentrations, thus eliminating the potential for 10B(n,alpha)6Li heating issues that are common in boron carbide systems. A wide range of other reactivity control systems are also investigated, such as a radially-split rotating reflector. Lastly, an extension of the design to a terrestrial based system is investigated. In this system, uranium enrichment is dropped to 20 percent in order to meet current regulations, a solid uranium-zirconium hydride fissile driver replaces the uranium dioxide TRISO particles, and the moderating material is changed from beryllium oxide to graphite. These changes result in an increased core size, but the same long-term power generation potential is achieved. Additionally, small amounts of erbium are added to the hydride matrix to further extend core lifetime.

  3. Can Tribes Control Energy Development?

    ERIC Educational Resources Information Center

    Owens, Nancy J.

    1979-01-01

    Emphasizing that the Indian future does not have to be bleak if only Indians take greater control over energy development on their lands. Two-thirds of the total Indian population control 33 percent of U.S. low-sulfer, strippable coal; 80 percent of U.S. uranium reserves; and about 10 percent of petroleum and gas reserves. (Author/RTS)

  4. 40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with an inlet dryer... dryer” AND you have a record of the inlet moisture content and inlet dryer temperature (as required in... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

  5. 40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with an inlet dryer... dryer” AND you have a record of the inlet moisture content and inlet dryer temperature (as required in... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

  6. Noni-based nutritional supplementation and exercise interventions influence body composition

    PubMed Central

    Palu, Afa K.; West, Brett J.; Jensen, Jarakae

    2011-01-01

    Background: The prevalence of obesity and overweight in the Unites States has reached unprecedented levels, and so has the need for effective exercise and nutritional programs for prevention of unhealthy weight gain or safe weight loss. Aims: The present study was conducted in overweight men and women to assess the impact of noni-based nutritional supplementation and exercise interventions on body composition. Materials and Methods: Twenty two participants (16 women and 6 men), ages 18-65, were enrolled in a 12-week, open-label trial of a weight-loss program involving noni-based dietary supplements, gender-specific daily calorie restriction, and exercise interventions. Weight, percent body fat, and body mass index were measured before and after the trial. Results: All participants experienced weight loss. The average decrease in fat mass was highly significant (P < 0.0001), as were decreases in percent body fat and body mass index. Individual weight and fat mass losses were 17.55 ± 9.73 and 21.78 ± 8.34 lbs., respectively, and individual percent body fat and body mass index decreases were 8.91 ± 3.58 % and 2.6 ± 1.32, respectively. Conclusion: The nutritional and exercise interventions significantly influenced body composition among participants. PMID:22363077

  7. Noni-based nutritional supplementation and exercise interventions influence body composition.

    PubMed

    Palu, Afa K; West, Brett J; Jensen, Jarakae

    2011-12-01

    The prevalence of obesity and overweight in the Unites States has reached unprecedented levels, and so has the need for effective exercise and nutritional programs for prevention of unhealthy weight gain or safe weight loss. The present study was conducted in overweight men and women to assess the impact of noni-based nutritional supplementation and exercise interventions on body composition. Twenty two participants (16 women and 6 men), ages 18-65, were enrolled in a 12-week, open-label trial of a weight-loss program involving noni-based dietary supplements, gender-specific daily calorie restriction, and exercise interventions. Weight, percent body fat, and body mass index were measured before and after the trial. All participants experienced weight loss. The average decrease in fat mass was highly significant (P < 0.0001), as were decreases in percent body fat and body mass index. Individual weight and fat mass losses were 17.55 ± 9.73 and 21.78 ± 8.34 lbs., respectively, and individual percent body fat and body mass index decreases were 8.91 ± 3.58 % and 2.6 ± 1.32, respectively. The nutritional and exercise interventions significantly influenced body composition among participants.

  8. Fission- and alpha-track study of biogeochemistry of plutonium and uranium in carbonates of bikini and enewetak atolls. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Levy, Y.; Friedman, G. M.; Miller, D. S.

    1978-12-31

    Results of the analysis of uranium concentrations in the 8 coral heads sampled from the Bikini and Enewetak lagoons lead to the following conclusions: (1) no parallel increase in uranium concentration was found in the corals contaminated by Pu and Am; (2) in the noncontaminated corals, the fission track analysis shows wider ranges of uranium concentrations (1.8 to 3.1). Thus, in the corals not contaminated by Pu and Am, uranium concentrations similar to the uranium concentration in the contaminated corals were found; (3) uranium content in all corals analyzed was rather homogeneously distributed, i.e., no hot spots, stars, or areasmore » differing in concentration by more than a few percent were detected by the fission track analyses.« less

  9. Insurance-mandated medical weight management before bariatric surgery.

    PubMed

    Horwitz, Daniel; Saunders, John K; Ude-Welcome, Akuezunkpa; Parikh, Manish

    2016-01-01

    Many insurance companies require a medical weight management (MWM) program as a prerequisite for approval for bariatric surgery. There is debate regarding the benefit of this requirement. The objective of this study is to assess the effect of insurance-mandated MWM programs on weight loss outcomes in our bariatric surgery population. To assess the effect of insurance-mandated MWM programs on weight loss outcomes in our bariatric surgery population. University. A retrospective review of all bariatric surgery cases performed between 2009 and 2013 was conducted. Patients were stratified by payor mix based on whether the insurance company required MWM. To control for differences between groups, a bucket matching algorithm was used to match patients based on gender, age, body mass index (BMI), and surgery type (sleeve gastrectomy, gastric bypass, or gastric band). A repeated-measures regression model was created to estimate percent excess weight loss, percent excess BMI loss, and percent total weight loss. A total of 1432 bariatric surgery patients were reviewed. The bucket-matching algorithm resulted in 560 patients for final analysis. Mean age and BMI were 41 years and 43 kg/m(2), respectively, and 91% were female. The regression model found no significant differences in weight loss outcomes between the MWM group and the comparison group at 1 year and 2 years-percent total weight loss: 21.3% [95% confidence interval [CI] 20.6%-22.1%] versus 20.2% [95%CI 19.7%-20.6%) at 1 year and 23.4% [95%CI 22.6%-24.3%] versus 21.5% [95%CI 21.0%-22.0%] at 2 years. There was no difference in weight loss outcomes up to 2 years in patients who required insurance-mandated MWM programs. Longer-term studies are needed to determine the benefit of this insurance requirement. Copyright © 2016 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

  10. Muscular development and lean body weight in body builders and weight lifters.

    PubMed

    Katch, V L; Katch, F I; Moffatt, R; Gittleson, M

    1980-01-01

    The extent of extreme muscular development in 39 males identified as body builders (N = 18), power weight lifters (N = 13), and Olympic weight lifters (N = 8) were studied. Body composition and anthropometric data, including calculations of pre-excess muscle body weight (scale weight minus excess muscle) were obtained. The lean body weight and percent fats of the subjects were: body builders = 74.6 kg, 9.3%; power weight lifters = 73.3 kg, 9.1%; and Olympic weight lifters = 68.2 kg, 10.8%. No group differences were present in frame size, percent fat, lean body weight, skinfolds, and diameter measurements. The only group differences were for the shoulders, chest, biceps relaxed and flexed, and forearm girths. In each case the body builders were larger. Calculations of excess muscle by the Behnke method revealed that the body builders had 15.6 kg excess muscle, power weight lifters 14.8 kg, and Olympic weight lifters 13.1 kg. Somatographic comparisons revealed only slight differences between the groups, while differences with reference man were substantial.

  11. Effect of acclimation to caging on nephrotoxic response of rats to uranium

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Damon, E.G.; Eidson, A.F.; Hobbs, C.H.

    1986-02-01

    Animal studies of the toxicity and metabolism of radionuclides and chemicals often require housing of rats in metabolism cages for excreta collection. Response of rats to toxic substances may be affected by environmental factors such as the type of cage used. Dose-response studies were conducted to assess the effects of two types of cages on the nephrotoxic response of rats to uranium from implanted refined uranium ore (yellowcake). The LD50/21 days was 6 mg of uranium ore per kilogram body weight (6 mg U/kg). The 95% confidence limit (C.L.) was 3-8 mg U/kg for rats housed in metabolism cages beginningmore » on the day of implantation (naive rats). However, for rats housed in metabolism cages for 21 days before implantation (acclimated rats) the LD50/21 days was 360 mg U/kg (95% C.L. = 220-650 mg U/kg), which was the same value obtained for rats housed continuously in polycarbonate cages. This significant difference (P less than 0.01) in response of naive rats compared to response of acclimated rats appeared related to a significantly lower water consumption by the naive rats.« less

  12. Effect of acclimation to caging on nephrotoxic response of rats to uranium.

    PubMed

    Damon, E G; Eidson, A F; Hobbs, C H; Hahn, F F

    1986-02-01

    Animal studies of the toxicity and metabolism of radionuclides and chemicals often require housing of rats in metabolism cages for excreta collection. Response of rats to toxic substances may be affected by environmental factors such as the type of cage used. Dose-response studies were conducted to assess the effects of two types of cages on the nephrotoxic response of rats to uranium from implanted refined uranium ore (yellowcake). The LD50/21 days was 6 mg of uranium ore per kilogram body weight (6 mg U/kg). The 95% confidence limit (C.L.) was 3-8 mg U/kg for rats housed in metabolism cages beginning on the day of implantation (naive rats). However, for rats housed in metabolism cages for 21 days before implantation (acclimated rats) the LD50/21 days was 360 mg U/kg (95% C.L. = 220-650 mg U/kg), which was the same value obtained for rats housed continuously in polycarbonate cages. This significant difference (P less than 0.01) in response of naive rats compared to response of acclimated rats appeared related to a significantly lower water consumption by the naive rats.

  13. REMOVAL OF ALUMINUM COATINGS

    DOEpatents

    Peterson, J.H.

    1959-08-25

    A process is presented for dissolving aluminum jackets from uranium fuel elements without attack of the uranium in a boiling nitric acid-mercuric nitrate solution containing up to 50% by weight of nitrtc acid and mercuric nitrate in a concentration of between 0.05 and 1% by weight.

  14. Uranium in Holocene valley-fill sediments, and uranium, radon, and helium in waters, Lake Tahoe-Carson Range area, Nevada and California, U.S.A.

    USGS Publications Warehouse

    Otton, J.K.; Zielinski, R.A.; Been, J.M.

    1989-01-01

    Uraniferous Holocene sediments occur in the Carson Range of Nevada and California, U.S.A., between Lake Tahoe and Carson Valley. The hosts for the uranium include peat and interbedded organic-rich sand, silt, and mud that underly valley floors, fens, and marshes along stream valleys between the crest of the range and the edge of Lake Tahoe. The known uranium accumulations extend along the Carson Range from the area just southeast of South Lake Tahoe northward to the area just east of Carson City; however, they almost certainly continue beyond the study area to the north, west, and south. Due to the young age of the accumulations, uranium in them is in gross disequilibrium with its highly radioactive daughter products. These accumulations have thus escaped discovery with radiation detection equipment in the past. The uranium content of these sediments approaches 0.6 percent; however, the average is in the range of 300-500 ppm. Waters associated with these sediments locally contain as much as 177 ppb uranium. Modest levels of helium and radon also occur in these waters. Uraniferous waters are clearly entering the private and public water supply systems in some parts of the study area; however, it is not known how much uranium is reaching users of these water supplies. Many of the waters sampled in the study area exceed the published health effects guidance level of the Environmental Protection Agency. Regulatory standards for uranium in waters have not been published, however. Much uranium is stored in the sediments along these stream valleys. Estimates for a marsh and a fen along one drainage are 24,000 and 15,000 kg, respectively. The potential effects of man-induced environmental changes on the uranium are uncertain. Laboratory studies of uraniferous sediment rich in organic matter may allow us to evaluate the potential of liberating uranium from such sediments and creating transient increases in the level of uranium moving in water in the natural environment. ?? 1989 Springer-Verlag New York Inc.

  15. Low melting high lithia glass compositions and methods

    DOEpatents

    Jantzen, Carol M.; Pickett, John B.; Cicero-Herman, Connie A.; Marra, James C.

    2003-09-23

    The invention relates to methods of vitrifying waste and for lowering the melting point of glass forming systems by including lithia formers in the glass forming composition in significant amounts, typically from about 0.16 wt % to about 11 wt %, based on the total glass forming oxides. The lithia is typically included as a replacement for alkali oxide glass formers that would normally be present in a particular glass forming system. Replacement can occur on a mole percent or weight percent basis, and typically results in a composition wherein lithia forms about 10 wt % to about 100 wt % of the alkali oxide glass formers present in the composition. The present invention also relates to the high lithia glass compositions formed by these methods. The invention is useful for stabilization of numerous types of waste materials, including aqueous waste uranium oxides The decrease in melting point achieved by the present invention desirably prevents volatilization of hazardous or radioactive species during vitrification.

  16. 21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

  17. 21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

  18. 21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

  19. 21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

  20. 40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... furnish with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate... criteria of a “dry rotary dryer” AND you have a record of the inlet moisture content and inlet dryer... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

  1. 40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... furnish with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate... criteria of a “dry rotary dryer” AND you have a record of the inlet moisture content and inlet dryer... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

  2. 40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... furnish with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate... criteria of a “dry rotary dryer” AND you have a record of the inlet moisture content and inlet dryer... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

  3. 7 CFR 52.3188 - Work sheet for dried prunes.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... defects, including off-color and poor texture 20 percent Poor texture, end cracks, skin or flesh damage, 3..., decay But no more than 6 percent But no more than 8 percent End cracks,2 skin or flesh damage, 3... (including all factors) 1 Percentages of defects are “by weight.” 2 Except that each 1 percent of end cracks...

  4. A randomized trial of a low-carbohydrate diet for obesity.

    PubMed

    Foster, Gary D; Wyatt, Holly R; Hill, James O; McGuckin, Brian G; Brill, Carrie; Mohammed, B Selma; Szapary, Philippe O; Rader, Daniel J; Edman, Joel S; Klein, Samuel

    2003-05-22

    Despite the popularity of the low-carbohydrate, high-protein, high-fat (Atkins) diet, no randomized, controlled trials have evaluated its efficacy. We conducted a one-year, multicenter, controlled trial involving 63 obese men and women who were randomly assigned to either a low-carbohydrate, high-protein, high-fat diet or a low-calorie, high-carbohydrate, low-fat (conventional) diet. Professional contact was minimal to replicate the approach used by most dieters. Subjects on the low-carbohydrate diet had lost more weight than subjects on the conventional diet at 3 months (mean [+/-SD], -6.8+/-5.0 vs. -2.7+/-3.7 percent of body weight; P=0.001) and 6 months (-7.0+/-6.5 vs. -3.2+/-5.6 percent of body weight, P=0.02), but the difference at 12 months was not significant (-4.4+/-6.7 vs. -2.5+/-6.3 percent of body weight, P=0.26). After three months, no significant differences were found between the groups in total or low-density lipoprotein cholesterol concentrations. The increase in high-density lipoprotein cholesterol concentrations and the decrease in triglyceride concentrations were greater among subjects on the low-carbohydrate diet than among those on the conventional diet throughout most of the study. Both diets significantly decreased diastolic blood pressure and the insulin response to an oral glucose load. The low-carbohydrate diet produced a greater weight loss (absolute difference, approximately 4 percent) than did the conventional diet for the first six months, but the differences were not significant at one year. The low-carbohydrate diet was associated with a greater improvement in some risk factors for coronary heart disease. Adherence was poor and attrition was high in both groups. Longer and larger studies are required to determine the long-term safety and efficacy of low-carbohydrate, high-protein, high-fat diets. Copyright 2003 Massachusetts Medical Society

  5. Depleted Uranium | RadTown USA | US EPA

    EPA Pesticide Factsheets

    2018-01-12

    Depleted uranium is the material left after most of the highly radioactive uranium-235 is removed from uranium ore for nuclear power and weapons. DU is used for tank armor, armor-piercing bullets and as weights to help balance aircraft. DU is both a toxic chemical and radiation health hazard when inside the body.

  6. Naturally occurring contaminants in the Piedmont and Blue Ridge crystalline-rock aquifers and Piedmont Early Mesozoic basin siliciclastic-rock aquifers, eastern United States, 1994–2008

    USGS Publications Warehouse

    Chapman, Melinda J.; Cravotta, Charles A.; Szabo, Zoltan; Lindsay, Bruce D.

    2013-01-01

    Groundwater quality and aquifer lithologies in the Piedmont and Blue Ridge Physiographic Provinces in the eastern United States vary widely as a result of complex geologic history. Bedrock composition (mineralogy) and geochemical conditions in the aquifer directly affect the occurrence (presence in rock and groundwater) and distribution (concentration and mobility) of potential naturally occurring contaminants, such as arsenic and radionuclides, in drinking water. To evaluate potential relations between aquifer lithology and the spatial distribution of naturally occurring contaminants, the crystalline-rock aquifers of the Piedmont and Blue Ridge Physiographic Provinces and the siliciclastic-rock aquifers of the Early Mesozoic basin of the Piedmont Physiographic Province were divided into 14 lithologic groups, each having from 1 to 16 lithochemical subgroups, based on primary rock type, mineralogy, and weathering potential. Groundwater-quality data collected by the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program from 1994 through 2008 from 346 wells and springs in various hydrogeologic and land-use settings from Georgia through New Jersey were compiled and analyzed for this study. Analyses for most constituents were for filtered samples, and, thus, the compiled data consist largely of dissolved concentrations. Concentrations were compared to criteria for protection of human health, such as U.S. Environmental Protection Agency (USEPA) drinking water maximum contaminant levels and secondary maximum contaminant levels or health-based screening levels developed by the USGS NAWQA Program in cooperation with the USEPA, the New Jersey Department of Environmental Protection, and Oregon Health & Science University. Correlations among constituent concentrations, pH, and oxidation-reduction (redox) conditions were used to infer geochemical controls on constituent mobility within the aquifers. Of the 23 trace-element constituents evaluated, arsenic, manganese, and zinc were detected in one or more water samples at concentrations greater than established human health-based criteria. Arsenic concentrations typically were less than 1 microgram per liter (µg/L) in most groundwater samples; however, concentrations of arsenic greater than 1 µg/L frequently were detected in groundwater from clastic lacustrine sedimentary rocks of the Early Mesozoic basin aquifers and from metamorphosed clastic sedimentary rocks of the Piedmont and Blue Ridge crystalline rock aquifers. Groundwater from these rock units had elevated pH compared to other rock units evaluated in this study. Of the nine samples for which arsenic concentration was greater than 10 µg/L, six were classified as oxic and three as anoxic, and seven had pH of 7.2 or greater. Manganese concentrations typically were less than 10 µg/L in most samples; however, 8.3 percent of samples from the Piedmont and Blue Ridge crystalline-rock aquifers and 3.0 percent of samples from the Early Mesozoic basin siliciclastic rock aquifers had manganese concentrations greater than the 300-µg/L health-based screening level. The positive correlation of manganese with iron and ammonia and the negative correlation of manganese with dissolved oxygen and nitrate are consistent with the reductive dissolution of manganese oxides in the aquifer. Zinc concentrations typically were less than 10 µg/L in the groundwater samples considered in the study, but 0.4 percent and 5.5 percent of the samples had concentrations greater than the health-based screening level of 2,000 µg/L and one-tenth of the health-based screening level, respectively. The mean rank concentration of zinc in groundwater from the quartz-rich sedimentary rock lithologic group was greater than that for other lithologic groups even after eliminating samples collected from wells constructed with galvanized casing. Approximately 90 percent of 275 groundwater samples had radon-222 concentrations that were greater than the proposed alternative maximum contaminant level of 300 picocuries per liter. In contrast, only 2.0 percent of 98 samples had combined radium (radium-226 plus radium-228) concentrations greater than the maximum contaminant level of 5.0 picocuries per liter, and 0.6 percent of 310 samples had uranium concentrations greater than the maximum contaminant level of 30 µg/L. Radon concentrations were highest in the Piedmont and Blue Ridge crystalline-rock aquifers, especially in granite, and elevated median concentrations were noted in the Piedmont Early Mesozoic basin aquifers, but without the extreme maximum concentrations found in the crystalline rocks (granites). Although the siliciclastic lithologies had a greater frequency of elevated uranium concentrations, radon and radium were commonly detected in water from both siliciclastic and crystalline lithologies. Uranium concentrations in groundwater from clastic sedimentary and clastic lacustrine/evaporite sedimentary lithologic groups within the Early Mesozoic basin aquifers, which had median concentrations of 3.6 and 3.1 µg/L, respectively, generally were higher than concentrations for other siliciclastic lithologic groups, which had median concentrations less than 1 µg/L. Although 89 percent of the 260 samples from crystalline-rock aquifers had uranium concentrations less than 1 µg/L, 0.8 percent had uranium concentrations greater than the 30-µg/L maximum contaminant level, and 6.5 percent had concentrations greater than 3 µg/L.

  7. Estimation of uranium migration parameters in sandstone aquifers.

    PubMed

    Malov, A I

    2016-03-01

    The chemical composition and isotopes of carbon and uranium were investigated in groundwater samples that were collected from 16 wells and 2 sources in the Northern Dvina Basin, Northwest Russia. Across the dataset, the temperatures in the groundwater ranged from 3.6 to 6.9 °C, the pH ranged from 7.6 to 9.0, the Eh ranged from -137 to +128 mV, the total dissolved solids (TDS) ranged from 209 to 22,000 mg L(-1), and the dissolved oxygen (DO) ranged from 0 to 9.9 ppm. The (14)C activity ranged from 0 to 69.96 ± 0.69 percent modern carbon (pmC). The uranium content in the groundwater ranged from 0.006 to 16 ppb, and the (234)U:(238)U activity ratio ranged from 1.35 ± 0.21 to 8.61 ± 1.35. The uranium concentration and (234)U:(238)U activity ratio increased from the recharge area to the redox barrier; behind the barrier, the uranium content is minimal. The results were systematized by creating a conceptual model of the Northern Dvina Basin's hydrogeological system. The use of uranium isotope dating in conjunction with radiocarbon dating allowed the determination of important water-rock interaction parameters, such as the dissolution rate:recoil loss factor ratio Rd:p (a(-1)) and the uranium retardation factor:recoil loss factor ratio R:p in the aquifer. The (14)C age of the water was estimated to be between modern and >35,000 years. The (234)U-(238)U age of the water was estimated to be between 260 and 582,000 years. The Rd:p ratio decreases with increasing groundwater residence time in the aquifer from n × 10(-5) to n × 10(-7) a(-1). This finding is observed because the TDS increases in that direction from 0.2 to 9 g L(-1), and accordingly, the mineral saturation indices increase. Relatively high values of R:p (200-1000) characterize aquifers in sandy-clayey sediments from the Late Pleistocene and the deepest parts of the Vendian strata. In samples from the sandstones of the upper part of the Vendian strata, the R:p value is ∼ 24, i.e., sorption processes are expressed more weakly, and uranium is possibly desorbed from the sediments. Overall, these results provide a better understanding of the evolution of uranium isotopes in groundwater systems. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Analysis of Rare Earth Elements in Uranium Using Handheld Laser-Induced Breakdown Spectroscopy (HH LIBS)

    DOE PAGES

    Manard, Benjamin T.; Wylie, E. Miller; Willson, Stephen P.

    2018-05-22

    In this paper, a portable handheld laser-induced breakdown spectroscopy (HH LIBS) instrument was evaluated as a rapid method to qualitatively analyze rare earth elements in a uranium oxide matrix. This research is motivated by the need for development of a method to perform rapid, at-line chemical analysis in a nuclear facility, particularly to provide a rapid first pass analysis to determine if additional actions or measurements are warranted. This will result in the minimization of handling and transport of radiological and nuclear material and subsequent exposure to their associated hazards. In this work, rare earth elements (Eu, Nd, and Yb)more » were quantitatively spiked into a uranium oxide powder and analyzed by the HH LIBS instrumentation. This method demonstrates the ability to rapidly identify elemental constituents in sub-percent levels in a uranium matrix. Preliminary limits of detection (LODs) were determined with values on the order of hundredths of a percent. Validity of this methodology was explored by employing a National Institute of Standards and Technology (NIST) standard reference materials (SRM) 610 and 612 (Trace Elements in Glass). Finally, it was determined that the HH LIBS method was able to clearly discern the rare earths elements of interest in the glass or uranium matrices.« less

  9. Analysis of Rare Earth Elements in Uranium Using Handheld Laser-Induced Breakdown Spectroscopy (HH LIBS)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Manard, Benjamin T.; Wylie, E. Miller; Willson, Stephen P.

    In this paper, a portable handheld laser-induced breakdown spectroscopy (HH LIBS) instrument was evaluated as a rapid method to qualitatively analyze rare earth elements in a uranium oxide matrix. This research is motivated by the need for development of a method to perform rapid, at-line chemical analysis in a nuclear facility, particularly to provide a rapid first pass analysis to determine if additional actions or measurements are warranted. This will result in the minimization of handling and transport of radiological and nuclear material and subsequent exposure to their associated hazards. In this work, rare earth elements (Eu, Nd, and Yb)more » were quantitatively spiked into a uranium oxide powder and analyzed by the HH LIBS instrumentation. This method demonstrates the ability to rapidly identify elemental constituents in sub-percent levels in a uranium matrix. Preliminary limits of detection (LODs) were determined with values on the order of hundredths of a percent. Validity of this methodology was explored by employing a National Institute of Standards and Technology (NIST) standard reference materials (SRM) 610 and 612 (Trace Elements in Glass). Finally, it was determined that the HH LIBS method was able to clearly discern the rare earths elements of interest in the glass or uranium matrices.« less

  10. Analysis of Rare Earth Elements in Uranium Using Handheld Laser-Induced Breakdown Spectroscopy (HH LIBS).

    PubMed

    Manard, Benjamin T; Wylie, E Miller; Willson, Stephen P

    2018-01-01

    A portable handheld laser-induced breakdown spectroscopy (HH LIBS) instrument was evaluated as a rapid method to qualitatively analyze rare earth elements in a uranium oxide matrix. This research is motivated by the need for development of a method to perform rapid, at-line chemical analysis in a nuclear facility, particularly to provide a rapid first pass analysis to determine if additional actions or measurements are warranted. This will result in the minimization of handling and transport of radiological and nuclear material and subsequent exposure to their associated hazards. In this work, rare earth elements (Eu, Nd, and Yb) were quantitatively spiked into a uranium oxide powder and analyzed by the HH LIBS instrumentation. This method demonstrates the ability to rapidly identify elemental constituents in sub-percent levels in a uranium matrix. Preliminary limits of detection (LODs) were determined with values on the order of hundredths of a percent. Validity of this methodology was explored by employing a National Institute of Standards and Technology (NIST) standard reference materials (SRM) 610 and 612 (Trace Elements in Glass). It was determined that the HH LIBS method was able to clearly discern the rare earths elements of interest in the glass or uranium matrices.

  11. Preliminary report on uranium deposits in the Miller Hill area, Carbon County, Wyoming

    USGS Publications Warehouse

    Love, J.D.

    1953-01-01

    A sequence of radioactive rocks of Miocene (?) age, the Browns Park formation, in the Miller Hill area of southern Wyoming is more than 1,000 feet thick. The formation crops out in an area of approximately 600 square miles, and consists of a basal conglomerate, tuffs, tuffaceous limy sandstones, and thin persistent radioactive algal limestones. Uranium is concentrated in both algal limestones and in tuffaceous limy sandstones. The uranium is believed to have been deposited. at least in part with the sediments, rather than to have come in at a later date. The highest uranium values were found in a widespread algal limestone bed, which contains as much as 0. 15 percent uranium. Values of 0.01 percent uranium or more were obtained from 8 samples taken from approximately 220 feet of stratigraphic section in the Browns Park formation. This is the first reported occurrence of limestone source rock from Wyoming that has been found to contain a commercial grade of uranium. The economic possibilities of the area have not been determined adequately and no estimates of tonnage are warranted at the present time. An airborne radiometric survey was made by the Geophysics Branch of the Geological Survey, of the west half of the area, recommended by the writer for investigation. Ground check of all anomalies reported at that time showed that they were in localities where the background radiation was much higher than average. Additional localities with high background radiation were found on the ground in the area east of that which was flown.

  12. Evaluation of a long-endurance-surveillance remotely-piloted vehicle with and without laminar flow control

    NASA Technical Reports Server (NTRS)

    Turriziani, R. V.; Lovell, W. A.; Price, J. E.; Quartero, C. B.; Washburn, S. F.

    1979-01-01

    Two aircraft were evaluated, using a derated TF34-GE-100 turbofan engine one with laminar flow control (LFC) and one without. The mission of the remotely piloted vehicles (RPV) is one of high-altitude loiter at maximum endurance. With the LFC system maximum mission time increased by 6.7 percent, L/D in the loiter phase improved 14.2 percent, and the minimum parasite drag of the wing was reduced by 65 percent resulting in a 37 percent reduction for the total airplane. Except for the minimum parasite drag of the wing, the preceding benefits include the offsetting effects of weight increase, suction power requirements, and drag of the wing-mounted suction pods. In a supplementary study using a scaled-down, rather than derated, version of the engine, on the LFC configuration, a 17.6 percent increase in mission time over the airplane without LFC and an incremental time increase of 10.2 percent over the LFC airplane with derated engine were attained. This improvement was due principally to reductions in both weight and drag of the scaled engine.

  13. A low-carbohydrate as compared with a low-fat diet in severe obesity.

    PubMed

    Samaha, Frederick F; Iqbal, Nayyar; Seshadri, Prakash; Chicano, Kathryn L; Daily, Denise A; McGrory, Joyce; Williams, Terrence; Williams, Monica; Gracely, Edward J; Stern, Linda

    2003-05-22

    The effects of a carbohydrate-restricted diet on weight loss and risk factors for atherosclerosis have been incompletely assessed. We randomly assigned 132 severely obese subjects (including 77 blacks and 23 women) with a mean body-mass index of 43 and a high prevalence of diabetes (39 percent) or the metabolic syndrome (43 percent) to a carbohydrate-restricted (low-carbohydrate) diet or a calorie- and fat-restricted (low-fat) diet. Seventy-nine subjects completed the six-month study. An analysis including all subjects, with the last observation carried forward for those who dropped out, showed that subjects on the low-carbohydrate diet lost more weight than those on the low-fat diet (mean [+/-SD], -5.8+/-8.6 kg vs. -1.9+/-4.2 kg; P=0.002) and had greater decreases in triglyceride levels (mean, -20+/-43 percent vs. -4+/-31 percent; P=0.001), irrespective of the use or nonuse of hypoglycemic or lipid-lowering medications. Insulin sensitivity, measured only in subjects without diabetes, also improved more among subjects on the low-carbohydrate diet (6+/-9 percent vs. -3+/-8 percent, P=0.01). The amount of weight lost (P<0.001) and assignment to the low-carbohydrate diet (P=0.01) were independent predictors of improvement in triglyceride levels and insulin sensitivity. Severely obese subjects with a high prevalence of diabetes or the metabolic syndrome lost more weight during six months on a carbohydrate-restricted diet than on a calorie- and fat-restricted diet, with a relative improvement in insulin sensitivity and triglyceride levels, even after adjustment for the amount of weight lost. This finding should be interpreted with caution, given the small magnitude of overall and between-group differences in weight loss in these markedly obese subjects and the short duration of the study. Future studies evaluating long-term cardiovascular outcomes are needed before a carbohydrate-restricted diet can be endorsed. Copyright 2003 Massachusetts Medical Society

  14. Critical analysis of world uranium resources

    USGS Publications Warehouse

    Hall, Susan; Coleman, Margaret

    2013-01-01

    The U.S. Department of Energy, Energy Information Administration (EIA) joined with the U.S. Department of the Interior, U.S. Geological Survey (USGS) to analyze the world uranium supply and demand balance. To evaluate short-term primary supply (0–15 years), the analysis focused on Reasonably Assured Resources (RAR), which are resources projected with a high degree of geologic assurance and considered to be economically feasible to mine. Such resources include uranium resources from mines currently in production as well as resources that are in the stages of feasibility or of being permitted. Sources of secondary supply for uranium, such as stockpiles and reprocessed fuel, were also examined. To evaluate long-term primary supply, estimates of uranium from unconventional and from undiscovered resources were analyzed. At 2010 rates of consumption, uranium resources identified in operating or developing mines would fuel the world nuclear fleet for about 30 years. However, projections currently predict an increase in uranium requirements tied to expansion of nuclear energy worldwide. Under a low-demand scenario, requirements through the period ending in 2035 are about 2.1 million tU. In the low demand case, uranium identified in existing and developing mines is adequate to supply requirements. However, whether or not these identified resources will be developed rapidly enough to provide an uninterrupted fuel supply to expanded nuclear facilities could not be determined. On the basis of a scenario of high demand through 2035, 2.6 million tU is required and identified resources in operating or developing mines is inadequate. Beyond 2035, when requirements could exceed resources in these developing properties, other sources will need to be developed from less well-assured resources, deposits not yet at the prefeasibility stage, resources that are currently subeconomic, secondary sources, undiscovered conventional resources, and unconventional uranium supplies. This report’s analysis of 141 mines that are operating or are being actively developed identifies 2.7 million tU of in-situ uranium resources worldwide, approximately 2.1 million tU recoverable after mining and milling losses were deducted. Sixty-four operating mines report a total of 1.4 million tU of in-situ RAR (about 1 million tU recoverable). Seventy-seven developing mines/production centers report 1.3 million tU in-situ Reasonably Assured Resources (RAR) (about 1.1 million tU recoverable), which have a reasonable chance of producing uranium within 5 years. Most of the production is projected to come from conventional underground or open pit mines as opposed to in-situ leach mines. Production capacity in operating mines is about 76,000 tU/yr, and in developing mines is estimated at greater than 52,000 tU/yr. Production capacity in operating mines should be considered a maximum as mines seldom produce up to licensed capacity due to operational difficulties. In 2010, worldwide mines operated at 70 percent of licensed capacity, and production has never exceeded 89 percent of capacity. The capacity in developing mines is not always reported. In this study 35 percent of developing mines did not report a target licensed capacity, so estimates of future capacity may be too low. The Organisation for Economic Co-operation and Development’s Nuclear Energy Agency (NEA) and International Atomic Energy Agency (IAEA) estimate an additional 1.4 million tU economically recoverable resources, beyond that identified in operating or developing mines identified in this report. As well, 0.5 million tU in subeconomic resources, and 2.3 million tU in the geologically less certain inferred category are identified worldwide. These agencies estimate 2.2 million tU in secondary sources such as government and commercial stockpiles and re-enriched uranium tails. They also estimate that unconventional uranium supplies (uraniferous phosphate and black shale deposits) may contain up to 7.6 million tU. Although unconventional resources are currently subeconomic, the improvement of extraction techniques or the production of coproducts may make extraction of uranium from these types of deposits profitable. A large undiscovered resource base is reported by these agencies, however this class of resource should be considered speculative and will require intensive exploration programs to adequately define them as mineable. These resources may all contribute to uranium supply that would fuel the world nuclear fleet well beyond that calculated in this report. Production of resources in both operating and developing uranium mines is subject to uncertainties caused by technical, legal, regulatory, and financial challenges that combined to create long timelines between deposit discovery and mine production. This analysis indicates that mine development is proceeding too slowly to fully meet requirements for an expanded nuclear power reactor fleet in the near future (to 2035), and unless adequate secondary or unconventional resources can be identified, imbalances in supply and demand may occur.

  15. Irradiation of TZM: Uranium dioxide fuel pin at 1700 K

    NASA Technical Reports Server (NTRS)

    Mcdonald, G. E.

    1973-01-01

    A fuel pin clad with TZM and containing solid pellets of uranium dioxide was fission heated in a static helium-cooled capsule at a maximum surface temperature of 1700 K for approximately 1000 hr and to a total burnup of 2.0 percent of the uranium-235. The results of the postirradiation examination indicated: (1) A transverse, intergranular failure of the fuel pin occurred when the fuel pin reached 2.0-percent burnup. This corresponds to 1330 kW-hr/cu cm, where the volume is the sum of the fuel, clad, and void volumes in the fuel region. (2) The maximum swelling of the fuel pin was less than 1.5 percent on the fuel-pin diameter. (3) There was no visible interaction between the TZM clad and the UO2. (4) Irradiation at 1700 K produced a course-grained structure, with an average grain diameter of 0.02 centimeter and with some of the grains extending one-half of the thickness of the clad. (5) Below approximately 1500 K, the irradiation of the clad produced a moderately fine-grained structure, with an average grain diameter of 0.004 centimeter.

  16. Modelling global methane emissions from livestock: Biological and nutritional controls

    NASA Technical Reports Server (NTRS)

    Johnson, Donald E.

    1992-01-01

    The available observations of methane production from the literature have been compiled into a ruminant methane data base. This data base includes 400 treatment mean observations of methane losses from cattle and sheep, and minor numbers of measurements from other species. Methane loss varied from 2.0 to 11.6 percent of dietary gross energy. Measurements included describe the many different weights and physiological states of the animals fed and diets ranging from all forage to all concentrate diets or mixtures. An auxiliary spreadsheet lists approximately 1000 individual animal observations. Many important concepts have emerged from our query and analysis of this data set. The majority of the world's cattle, sheep, and goats under normal husbandry circumstances likely produce methane very close to 6 percent of their daily diets gross energy (2 percent of the diet by weight). Although individual animals or losses from specific dietary research circumstances can vary considerably, the average for the vast majority of groups of ruminant livestock are likely to fall between 5.5 to 6.5 percent. We must caution, however, that little experimental data is available for two-thirds of the world's ruminants in developing countries. Available evidence suggests similar percentage of emissions, but this supposition needs confirmation. More importantly, data is skimpy or unavailable to describe diet consumption, animal weight, and class distribution.

  17. Measured and calculated fast neutron spectra in a depleted uranium and lithium hydride shielded reactor

    NASA Technical Reports Server (NTRS)

    Lahti, G. P.; Mueller, R. A.

    1973-01-01

    Measurements of MeV neutron were made at the surface of a lithium hydride and depleted uranium shielded reactor. Four shield configurations were considered: these were assembled progressively with cylindrical shells of 5-centimeter-thick depleted uranium, 13-centimeter-thick lithium hydride, 5-centimeter-thick depleted uranium, 13-centimeter-thick lithium hydride, 5-centimeter-thick depleted uranium, and 3-centimeter-thick depleted uranium. Measurements were made with a NE-218 scintillation spectrometer; proton pulse height distributions were differentiated to obtain neutron spectra. Calculations were made using the two-dimensional discrete ordinates code DOT and ENDF/B (version 3) cross sections. Good agreement between measured and calculated spectral shape was observed. Absolute measured and calculated fluxes were within 50 percent of one another; observed discrepancies in absolute flux may be due to cross section errors.

  18. The relationship between biological cognitive and psychosocial characteristics of parents and the weight of infant at the time of birth in Isfahan.

    PubMed

    Talebian, Mohammad Hassan; Afrooz, Gholam Ali; Hooman, Heidar Ali; Aghaei, Asghar

    2013-01-01

    The present study was connected in order to evaluate the relationship between biological, cognitive and psychosocial characteristics of mothers and the weight of infant at the time of birth. In order to conduct this research a sample of 910 women among recently delivered mothers of Isfahan province in 2009 were selected. From stratified sampling and cluster sampling according to the percentage of population in each of the cities of Isfahan Province was used. The data was gathered with a questionnaire prepared by the researcher in order to evaluate the biological cognitive and psychosocial characteristics of mothers, in addition to the Enrich marital satisfaction test. After collecting data, the analysis of the data was done with SPSS software in two categories of descriptive and inferential statistics by using logistic regression model. The results showed that the prevalence of low weight infants was 9.5 percent and 38.7 percent of pregnancies was unwanted. Twenty-nine percent of mothers had marital dissatisfaction. 15/6 percent of pregnancies were below 20 years old and 22 percent was above of 35 years old. 38.9 percent of mothers were exposed to cigarette smoke. The average of weight gain during pregnancies was 9 kilograms. Thirty three percent of mothers had high blood pressure during pregnancy, 26.7 percent had history of abortion and 31.9 percent had history of bleeding. 23/1percent of women was employed during pregnancy, 19.8 percent gave twin birth and 21/1 percent of parents were relative of each other, 29.7 percent of deliveries were done in cesarean way. The results of this study showed that severe marital dissatisfaction, abnormal blood pressure during pregnancy, being employed during pregnancy, weight gain less than 5 Kg during pregnancy, pregnancy below the age of 20 can meaning fully increase the possibility of low birth weight in infant (α=0.05). The results were consisting with the previous findings and indicated that some of the applicable benefits of this research can be recording of information about each delivery in the whole country with holding training workshops of before and during pregnancy skills by welfare organization.

  19. Relationship between junk foods intake and weight in 6-7 years old children, Shahin Shahr and Meymeh, Iran

    PubMed Central

    Darvishi, Leila; Ghiasvand, Reza; Ashrafi, Maryam; Ashrafzadeh, Elnaz; Askari, Gholamreza; Shiranian, Afshin; Hasanzadeh, Akbar

    2013-01-01

    Background: Healthy nutrition is very important considering the weight status especially in children. The aim of this study was to assess the relationship between junk foods intake and weight in 6-7-years old children. Materials and Methods: This cross-sectional study was carried out in Shahin Shahr and Meymeh, Iran, in 2009. Anthropometrics measures were done and 24-hour food recall used for dietary information and analyzed with food processor 2 and then compared with dietary reference intakes 2008 (DRI). Findings: 61.1 percent of the subjects were residing in dormitories and 12.7 percent were marred. Prevalence of overweight or obesity and abdominal obesity was 6.9 percent and 46.1 percent respectively. Mean (±SD) systolic blood pressure was 105.2 ± 15.6 mm/Hg and diastolic was 62.2 ± 10.4 mm/Hg. Totally, 3.9 percent of the subjects had hypertension. The analysis of food intake indicate that (B12, folate, magnesium, potassium, calcium) with level below the recommended ones, and (vitamin C, E, pantothenic acid, B1, B3, phosphate, zinc) with up levels the recommended ones, and energy intake, macronutrient, vitamin A, pyridoxine, iron, selenium were in general appropriate. Conclusion: These results indicated appropriate level of macronutrients intake and unbalance mainly existed in micronutrients. It is recommended to increase intake important food groups such as dairy, vegetable, fruit that include good source of micronutrients, and also it is suggested that need for strategies can improve competence in the area of nutrition. PMID:24083252

  20. Medial thigh lift in the massive weight loss population: outcomes and complications.

    PubMed

    Gusenoff, Jeffrey A; Coon, Devin; Nayar, Harry; Kling, Russell E; Rubin, J Peter

    2015-01-01

    Complication profiles of medial thighplasty in the massive weight loss population are not well described. The authors present their experience with these procedures in the massive weight loss population. Thighplasty patients from 2003 to 2012 were assessed. Variables included age, sex, body mass index, method of weight loss, comorbidities, and smoking status. Outcomes included seroma, dehiscence, infection, hematoma, edema, and revision. Statistical analysis was performed as appropriate. One hundred six subjects (90 women and 16 men) underwent thighplasty. Fourteen patients underwent horizontal thighplasty, with a complication rate of 43 percent; 24 underwent short-scar thighplasty, with a complication rate of 67 percent; and 68 underwent full-length vertical thighplasty, with a complication rate of 74 percent. Seventy-two subjects (68 percent) had at least one complication. Complications included dehiscence (51 percent), seroma (25 percent), infection (16 percent), and hematoma (6 percent). Overall, 25 patients (23 percent) developed edema, which did not resolve in two patients by 12 months. Hypertension was significantly associated with postoperative seroma (p = 0.02). Age (p = 0.01), hypothyroidism (p = 0.01), and liposuction outside the area of resection (p = 0.025) were associated with postoperative infections. A full-length vertical incision was associated with increased lower extremity edema (p = 0.007). Medial thighplasty has a high rate of minor wound healing problems. Full-length vertical thighplasty is associated with prolonged edema. Concomitant liposuction may also increase complications. Patients should be counseled appropriately about the potential for minor wound healing problems. Therapeutic, III.

  1. Background information for Van Aken on testing of NESTT product

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Reynolds, John G.

    2016-11-18

    Debris from explosives testing in a shot tank that contains 4 weight percent or less of explosive is shown to be non-reactive under the specified testing protocol in the Code of Federal Regulations. This debris can then be regarded as a non-hazardous waste on the basis of reactivity, when collected and packaged in a specified manner. If it is contaminated with radioactive components (e.g. depleted uranium), it can therefore be disposed of as radioactive waste or mixed waste, as appropriate (note that debris may contain other materials that render it hazardous, such as beryllium). We also discuss potential waste generationmore » issues in contained firing operations that are applicable to the planned new Contained Firing Facility (CFF).« less

  2. CONTINUOUS PROCESS FOR PREPARING URANIUM HEXAFLUORIDE FROM URANIUM TETRAFLUORIDE AND OXYGEN

    DOEpatents

    Adams, J.B.; Bresee, J.C.; Ferris, L.M.

    1961-11-21

    A process for preparing UF/sub 6/ by reacting UF/sub 4/ and oxygen is described. The UF/sub 4/ and oxygen are continuously introduced into a fluidized bed of UO/sub 2/F/sub 2/ at a temperature of 600 to 900 deg C. The concentration of UF/sub 4/ in the bed is maintained below 25 weight per cent in order to avoid sintering and intermediate compound formation. By-product U0/sub 2/F/sub 2/ is continuously removed from the top of the bed recycled. In an alternative embodiment heat is supplied to the reaction bed by burning carbon monoxide in the bed. The product UF/sub 6/ is filtered to remove entrained particles and is recovered in cold traps and chemical traps. (AEC)

  3. Method of preparing uranium nitride or uranium carbonitride bodies

    DOEpatents

    Wilhelm, Harley A.; McClusky, James K.

    1976-04-27

    Sintered uranium nitride or uranium carbonitride bodies having a controlled final carbon-to-uranium ratio are prepared, in an essentially continuous process, from U.sub.3 O.sub.8 and carbon by varying the weight ratio of carbon to U.sub.3 O.sub.8 in the feed mixture, which is compressed into a green body and sintered in a continuous heating process under various controlled atmospheric conditions to prepare the sintered bodies.

  4. Analysis of Tank 38H (HTF-38-16-80, 81) and Tank 43H (HTF-43-16-82, 83) Samples for Support of the Enrichment Control and Corrosion Control Programs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hay, M.

    2016-10-24

    SRNL analyzed samples from Tank 38H and Tank 43H to support ECP and CCP. The total uranium in the Tank 38H surface sample was 57.6 mg/L, while the sub-surface sample was 106 mg/L. The Tank 43H samples ranged from 50.0 to 51.9 mg/L total uranium. The U-235 percentage was consistent for all four samples at 0.62%. The total uranium and percent U-235 results appear consistent with recent Tank 38H and Tank 43H uranium measurements. The Tank 38H plutonium results show a large difference between the surface and sub-surface sample concentrations and somewhat higher concentrations than previous samples. The Pu-238 concentrationmore » is more than forty times higher in the Tank 38H sub-surface sample than the surface sample. The surface and sub-surface Tank 43H samples contain similar plutonium concentrations and are within the range of values measured on previous samples. The four samples analyzed show silicon concentrations somewhat higher than the previous sample with values ranging from 104 to 213 mg/L.« less

  5. Exopolysaccharide produced by Enterobacter sp. YG4 reduces uranium induced nephrotoxicity.

    PubMed

    K, Nagaraj; Devasya, Rekha Punchapady; Bhagwath, Arun Ananthapadmanabha

    2016-01-01

    Uranium nephrotoxicity is a health concern with very few treatment options. Bacterial exopolysaccharides (EPS) possess multiple biological activities and appear as prospective candidates for treating uranium nephrotoxicity. This study focuses on the ability of an EPS produced by a bacterial strain Enterobacter sp. YG4 to reduce uranium nephrotoxicity in vivo. This bacterium was isolated from the gut contents of a slug Laevicaulis alte (Férussac). Based on the aniline blue staining reaction and infrared spectral analysis, the EPS was identified as β-glucan and its molecular weight was 11.99×10(6)Da. The EPS showed hydroxyl radical scavenging ability and total antioxidant capacity in vitro. To assess the protection provided by the EPS against uranium nephrotoxicity, a single dose of 2mg/kg uranyl nitrate was injected intraperitoneally to albino Wistar rats. As intervention, the EPS was administered orally (100mg/kg/day) for 4 consecutive days. The rats were sacrificed on the fifth day and analyses were conducted. Increased serum creatinine and urea nitrogen levels and histopathological alterations in kidneys were observed in uranyl nitrate treated animals. All these alterations were reduced with the administration of Enterobacter sp. YG4 EPS, emphasizing a novel approach in treating uranium nephrotoxicity. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Comparison of two self-directed weight loss interventions: Limited weekly support vs. no outside support.

    PubMed

    Smith, Bryan K; Van Walleghen, Emily L; Cook-Wiens, Galen; Martin, Rachael N; Curry, Chelsea R; Sullivan, Debra K; Gibson, Cheryl A; Donnelly, Joseph E

    2009-08-01

    The purpose of this study was to compare the efficacy of two home-based weight loss interventions that differ only in the amount of outside support provided. This was a 12-week, randomized, controlled trial. One group received limited support (LWS, n = 35) via a single 10 min phone call each week while another group received no weekly support (NWS, n = 28). Both the LWS and NWS received pre-packaged meals (PM) and shakes. A third group served as control (CON, n = 30) and received no components of the intervention. Weight loss at 12 weeks was the primary outcome. Diet (PM, shake, and fruit/vegetable (F/V) intake) and physical activity (PA) were self-monitored, recorded daily and reported weekly. An exit survey was completed by participants in the intervention groups upon completion of the study. Weight loss and percent weight loss in the LWS, NWS, and CON groups were 7.7 ± 4.4 kg (8.5 ± 4.2%), 5.9 ± 4.1 kg (6.0 ± 4.2%), and 0.3 ± 1.9 kg (0.4 ± 1.2%), respectively. The decrease in body weight and percent weight loss was significantly greater in the LWS and NWS groups when compared to the CON group and the percent weight loss was significantly greater in the LWS when compared to both the NWS and CON groups. A home-based weight loss program utilizing PM and shakes results in clinically significant percent weight loss and the addition of a brief weekly call promotes additional percent weight loss. © 2009 Asian Oceanian Association for the Study of Obesity . Published by Elsevier Ltd. All rights reserved.

  7. Solubility Limits of Dibutyl Phosphoric Acid in Uranium Solutions at SRS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thompson, M.C.; Pierce, R.A.; Ray, R.J.

    1998-06-01

    The Savannah River Site has enriched uranium (EU) solution which has been stored for almost 10 years since being purified in the second uranium cycle of the H area solvent extraction process. The concentrations in solution are {tilde 6} g/L U and about 0.1 M nitric acid. Residual tributylphosphate in the solutions has slowly hydrolyzed to form dibutyl phosphoric acid (HDBP) at concentrations averaging 50 mg/L. Uranium is known to form compounds with DBP which have limited solubility. The potential to form uranium-DBP solids raises a nuclear criticality safety issue. SRTC tests have shown that U-DBP solids will precipitate atmore » concentrations potentially attainable during storage of enriched uranium solutions. Evaporation of the existing EUS solution without additional acidification could result in the precipitation of U-DBP solids if DBP concentration in the resulting solution exceeds 110 ppm at ambient temperature. The same potential exists for evaporation of unwashed 1CU solutions. The most important variables of interest for present plant operations are HNO{sub 3} and DBP concentrations. Temperature is also an important variable controlling precipitation. The data obtained in these tests can be used to set operating and safety limits for the plant. It is recommended that the data for 0 degrees C with 0.5 M HNO{sub 3} be used for setting the limits. The limit would be 80 mg/L which is 3 standard deviations below the average of 86 observed in the tests. The data shows that super-saturation can occur when the DBP concentration is as much as 50 percent above the solubility limit. However, super-saturation cannot be relied on for maintaining nuclear criticality safety. The analytical method for determining DBP concentration in U solutions was improved so that analyses for a solution are accurate to within 10 percent. However, the overall uncertainty of results for periodic samples of the existing EUS solutions was only reduced slightly. Thus, sampling appears to be the largest portion of the uncertainty for EUS sample results, although the number of samples analyzed here is low which could contribution to higher uncertainty. The analytical method can be transferred to the plant analytical labs for more routine analysis of samples.« less

  8. Insurance-mandated preoperative diet and outcomes after bariatric surgery.

    PubMed

    Keith, Charles J; Goss, Lauren E; Blackledge, Camille D; Stahl, Richard D; Grams, Jayleen

    2018-05-01

    Despite a lack of demonstrated patient benefit, many insurance providers mandate a physician-supervised diet before financial coverage for bariatric surgery. To compare weight loss between patients with versus without insurance mandating a preoperative diet. University hospital, United States. Retrospective study of all patients who underwent laparoscopic Roux-en-Y gastric bypass or sleeve gastrectomy over a 5-year period, stratified based on whether an insurance-mandated physician-supervised diet was required. Weight loss outcomes at 6, 12, and 24 months postoperation were compared. Linear mixed-models and backward-stepwise selection were used. P<0.05 was considered significant. Of 284 patients, 225 (79%) were required and 59 (21%) were not required to complete a preoperative diet by their insurance provider. Patients without the requirement had a shorter time to operation from initial consultation (P = .04), were older (P<.01), and were more likely to have government-sponsored insurance (P<.01). There was no difference in preoperative weight or body mass index or co-morbidities. In unadjusted models, percent excess weight loss was superior in the group without an insurance-mandated diet at 12 (P = .050) and 24 (P = .045) months. In adjusted analyses, this group also had greater percent excess weight loss at 6 (P<.001), 12 (P<.001), and 24 (P<.001) months; percent total weight loss at 24 months (P = .004); and change in body mass index at 6 (P = .032) and 24 (P = .007) months. There was no difference in length of stay or complication rates. Insurance-mandated preoperative diets delay treatment and may lead to inferior weight loss. Published by Elsevier Inc.

  9. Spatial Burnout in Water Reactors with Nonuniform Startup Distributions of Uranium and Boron

    NASA Technical Reports Server (NTRS)

    Fox, Thomas A.; Bogart, Donald

    1955-01-01

    Spatial burnout calculations have been made of two types of water moderated cylindrical reactor using boron as a burnable poison to increase reactor life. Specific reactors studied were a version of the Submarine Advanced Reactor (sAR) and a supercritical water reactor (SCW) . Burnout characteristics such as reactivity excursion, neutron-flux and heat-generation distributions, and uranium and boron distributions have been determined for core lives corresponding to a burnup of approximately 7 kilograms of fully enriched uranium. All reactivity calculations have been based on the actual nonuniform distribution of absorbers existing during intervals of core life. Spatial burnout of uranium and boron and spatial build-up of fission products and equilibrium xenon have been- considered. Calculations were performed on the NACA nuclear reactor simulator using two-group diff'usion theory. The following reactor burnout characteristics have been demonstrated: 1. A significantly lower excursion in reactivity during core life may be obtained by nonuniform rather than uniform startup distribution of uranium. Results for SCW with uranium distributed to provide constant radial heat generation and a core life corresponding to a uranium burnup of 7 kilograms indicated a maximum excursion in reactivity of 2.5 percent. This compared to a maximum excursion of 4.2 percent obtained for the same core life when w'anium was uniformly distributed at startup. Boron was incorporated uniformly in these cores at startup. 2. It is possible to approach constant radial heat generation during the life of a cylindrical core by means of startup nonuniform radial and axial distributions of uranium and boron. Results for SCW with nonuniform radial distribution of uranium to provide constant radial heat generation at startup and with boron for longevity indicate relatively small departures from the initially constant radial heat generation distribution during core life. Results for SAR with a sinusoidal distribution rather than uniform axial distributions of boron indicate significant improvements in axial heat generation distribution during the greater part of core life. 3. Uranium investments for cylindrical reactors with nonuniform radial uranium distributions which provide constant radial heat generation per unit core volume are somewhat higher than for reactors with uniform uranium concentration at startup. On the other hand, uranium investments for reactors with axial boron distributions which approach constant axial heat generation are somewhat smaller than for reactors with uniform boron distributions at startup.

  10. Human exposure to natural uranium: A case history and analytical results from some postmortem tissues

    PubMed Central

    Donoghue, J. K.; Dyson, E. D.; Hislop, J. S.; Leach, A. M.; Spoor, N. L.

    1972-01-01

    Donoghue, J. K., Dyson, E. D., Hislop, J. S., Leach, A. M., and Spoor, N. L. (1972).Brit. J. industr. Med.,29, 81-89. Human exposure to natural uranium: a case history and analytical results from some postmortem tissues. After the collapse and sudden death of an employee who had worked for 10 years in a natural uranium workshop, in which the airborne uranium was largely U3O8 with an Activity Median Aerodynamic Diameter in the range 3·5-6·0 μm and average concentration of 300 μg/m3, his internal organs were analysed for uranium. The tissues examined included lungs (1041 g), pulmonary lymph nodes (12 g), sternum (114 g), and kidneys (217 g). Uranium was estimated by neutron activation analysis, using irradiated tissue ash, and counting the delayed neutrons from uranium-235. The concentrations of uranium (μg U/g wet tissue) in the lungs, lymph nodes, sternum, and kidneys were 1·2, 1·8, 0·09, and 0·14 respectively. The weights deposited in the lungs and lymph nodes are less than 1% of the amounts calculated from the environmental data using the parameters currently applied in radiological protection. The figures are compatible with those reported by Quigley, heartherton, and Ziegler in 1958 and by Meichen in 1962. The relation between these results, the environmental exposure data, and biological monitoring data is discussed in the context of current views on the metabolism of inhaled insoluble uranium. PMID:5060250

  11. Descriptive models of major uranium deposits in China - Some results of the Workshop on Uranium Resource Assessment sponsored by the International Atomic Energy Agency, Vienna, Austria, in cooperation with China National Nuclear Corporation, Beijing, and the U.S. Geological Survey, Denver, Colorado, and Reston, Virginia

    USGS Publications Warehouse

    Finch, W.I.; Feng, S.; Zuyi, C.; McCammon, R.B.

    1993-01-01

    Four major types of uranium deposits occur in China: granite, volcanic, sandstone, and carbonaceous-siliceous-pelitic rock. These types are major sources of uranium in many parts of the world and account for about 95 percent of Chinese production. Descriptive models for each of these types record the diagnostic regional and local geologic features of the deposits that are important to genetic studies, exploration, and resource assessment. A fifth type of uranium deposit, metasomatite, is also modeled because of its high potential for production. These five types of uranium deposits occur irregularly in five tectonic provinces distributed from the northwest through central to southern China. ?? 1993 Oxford University Press.

  12. Uranium distribution in pseudowollastonite slag from a phosphorus furnace

    USGS Publications Warehouse

    Young, Edward; Altschuler, Zalman S.

    1956-01-01

    Silicate slag from the Victor Chemical Company phosphorus furnace at Tarpon Springs, Fla., has been found to consist essentially of pseudowollastonite, α-CaSiO3. The first-formed crystals are euhedral laths which form a mesh making up most of the slag. As the slag continues to solidify, its composition changes slightly and more equant, subhedral crystals of pseudowollastonite are deposited within the framework of the earlier material. Finally, anherdral masses of fibrous, poorly crystallized material are deposited in the remaining pore spaces which are not always completely filled. Spherules of iron phosphide, Fe2P, occur very sparsely in the slag as inclusions from the immiscible iron phosphide melt. Uranium content increases in the later crystal products of the slag, and by heavy-liquid fractionation it has been possible to segregate partially the phases and to obtain a fourfold concentration of uranium in 5 percent of the material and a twofold concentration in 30 percent of the material. Nuclear-emulsion studies indicate that the last phases of the silicate slag are actually eight times as radioactive as the early phases. In addition, the iron phosphide spherules are comparably enriches in uranium.

  13. Occurrence and hydrogeochemistry of radiochemical constituents in groundwater of Jefferson County and surrounding areas, southwestern Montana, 2007 through 2010

    USGS Publications Warehouse

    Caldwell, Rodney R.; Nimick, David A.; DeVaney, Rainie M.

    2014-01-01

    The U.S. Geological Survey, in cooperation with Jefferson County and the Jefferson Valley Conservation District, sampled groundwater in southwestern Montana to evaluate the occurrence and concentration of naturally-occurring radioactive constituents and to identify geologic settings and environmental conditions in which elevated concentrations occur. A total of 168 samples were collected from 128 wells within Broadwater, Deer Lodge, Jefferson, Lewis and Clark, Madison, Powell, and Silver Bow Counties from 2007 through 2010. Most wells were used for domestic purposes and were primary sources of drinking water for individual households. Water-quality samples were collected from wells completed within six generalized geologic units, and analyzed for constituents including uranium, radon, gross alpha-particle activity, and gross beta-particle activity. Thirty-eight wells with elevated concentrations or activities were sampled a second time to examine variability in water quality throughout time. These water-quality samples were analyzed for an expanded list of radioactive constituents including the following: three isotopes of uranium (uranium-234, uranium-235, and uranium-238), three isotopes of radium (radium-224, radium-226, and radium-228), and polonium-210. Existing U.S. Geological Survey and Montana Bureau of Mines and Geology uranium and radon water-quality data collected as part of other investigations through 2011 from wells within the study area were compiled as part of this investigation. Water-quality data from this study were compared to data collected nationwide by the U.S. Geological Survey through 2011. Radionuclide samples for this study typically were analyzed within a few days after collection, and therefore data for this study may closely represent the concentrations and activities of water being consumed locally from domestic wells. Radioactive constituents were detected in water from every well sampled during this study regardless of location or geologic unit. Nearly 41 percent of sampled wells had at least one radioactive constituent concentration that exceeded U.S. Environmental Protection Agency drinking-water standards or screening levels. Uranium concentrations were higher than the U.S. Environmental Protection Agency maximum contaminant level (MCL) of 30 micrograms per liter in samples from 14 percent of the wells. Radon concentrations exceeded a proposed MCL of 4,000 picocuries per liter in 27 percent of the wells. Combined radium (radium-226 and radium-228) exceeded the MCL of 5 picocuries per liter in samples from 10 of 47 wells. About 40 percent (42 of 104 wells) of the wells had gross alpha-particle activities (72-hour count) at or greater than a screening level of 15 pCi/L. Gross beta-particle activity exceeded the U.S. Environmental Protection Agency 50 picocuries per liter screening level in samples from 5 of 104 wells. Maximum radium-224 and polonium-210 activities in study wells were 16.1 and 3.08 picocuries per liter, respectively; these isotopes are constituents of human-health concern, but the U.S. Environmental Protection Agency has not established MCLs for them. Radioactive constituent concentrations or activities exceeded at least one established drinking-water standard, proposed drinking-water standard, or screening level in groundwater samples from five of six generalized geologic units assessed during this study. Radioactive constituent concentrations or activities were variable not only within each geologic unit, but also among wells that were completed in the same geologic unit and in close proximity to one another. Established or proposed drinking-water standards were exceeded most frequently in water from wells completed in the generalized geologic unit that includes rocks of the Boulder batholith and other Tertiary through Cretaceous igneous intrusive rocks (commonly described as granite). Specifically, of the wells completed in the Boulder batholith and related rocks sampled as part of this study, 24 percent exceeded the MCL of 30 micrograms per liter for uranium, 50 percent exceeded the proposed alternative MCL of 4,000 picocuries per liter for radon, and 27 percent exceeded the MCL of 5 micrograms per liter for combined radium-226 and radium-228. Elevated radioactive constituent values were detected in samples representing a large range of field properties and water types. Correlations between radioactive constituents and pH, dissolved oxygen, and most major ions were not statistically significant (p-value > 0.05) or were weakly correlated with Spearman correlation coefficients (rho) ranging from -0.5 to 0.5. Moderate correlations did exist between gross beta-particle activity and potassium (rho = 0.72 to 0.82), likely because one potassium isotope (potassium-40) is a beta-particle emitter. Total dissolved solids and specific conductance also were moderately correlated (rho = 0.62 to 0.71) with gross alpha-particle and gross beta-particle activity, indicating that higher radioactivity values can be associated with higher total dissolved solids. Correlations were evaluated among radioactive constituents. Moderate to strong correlations occurred between gross alpha-particle and beta-particle activities (rho = 0.77 to 0.96) and radium isotopes (rho = 0.78 to 0.92). Correlations between gross alpha-particle activity (72-hour count) and all analyzed radioactive constituents were statistically significant (p-value Radiochemical results varied temporally in samples from several of the thirty-eight wells sampled at least twice during the study. The time between successive sampling events ranged from about 1 to 10 months for 29 wells to about 3 years for the other 9 wells. Radiochemical constituents that varied by greater than 30 percent between sampling events included uranium (29 percent of the resampled wells), and radon (11 percent of the resampled wells), gross alpha-particle activity (38 percent of the resampled wells), and gross beta-particle activity (15 percent of the resampled wells). Variability in uranium concentrations from two wells was sufficiently large that concentrations were less than the MCL in the first set of samples and greater than the MCL in the second. Sample holding times affect analytical results in this study. Gross alpha-particle and gross beta-particle activities were measured twice, 72 hours and 30 days after sample collection. Gross alpha-particle activity decreased an average of 37 percent between measurements, indicating the presence of short-lived alpha-emitting radionuclides in these samples. Gross beta-particle activity increased an average of 31 percent between measurements, indicating ingrowth of longer-lived beta-emitting radionuclides.

  14. Heat and corrosion resistant cast CF8C stainless steel with improved high temperature strength and ductility

    DOEpatents

    Maziasz, Philip J.; McGreevy, Tim; Pollard, Michael James; Siebenaler, Chad W.; Swindeman, Robert W.

    2006-12-26

    A CF8C type stainless steel alloy and articles formed therefrom containing about 18.0 weight percent to about 22.0 weight percent chromium and 11.0 weight percent to about 14.0 weight percent nickel; from about 0.05 weight percent to about 0.15 weight percent carbon; from about 2.0 weight percent to about 10.0 weight percent manganese; and from about 0.3 weight percent to about 1.5 weight percent niobium. The present alloys further include less than 0.15 weight percent sulfur which provides high temperature strength both in the matrix and at the grain boundaries without reducing ductility due to cracking along boundaries with continuous or nearly-continuous carbides. The disclosed alloys also have increased nitrogen solubility thereby enhancing strength at all temperatures because nitride precipitates or nitrogen porosity during casting are not observed. The solubility of nitrogen is dramatically enhanced by the presence of manganese, which also retains or improves the solubility of carbon thereby providing additional solid solution strengthening due to the presence of manganese and nitrogen, and combined carbon.

  15. Heat and corrosion resistant cast CF8C stainless steel with improved high temperature strength and ductility

    DOEpatents

    Maziasz, Philip J.; McGreevy, Tim; Pollard, Michael James; Siebenaler, Chad W.; Swindeman, Robert W.

    2010-08-17

    A CF8C type stainless steel alloy and articles formed therefrom containing about 18.0 weight percent to about 22.0 weight percent chromium and 11.0 weight percent to about 14.0 weight percent nickel; from about 0.05 weight percent to about 0.15 weight percent carbon; from about 2.0 weight percent to about 10.0 weight percent manganese; and from about 0.3 weight percent to about 1.5 weight percent niobium. The present alloys further include less than 0.15 weight percent sulfur which provides high temperature strength both in the matrix and at the grain boundaries without reducing ductility due to cracking along boundaries with continuous or nearly-continuous carbides. The disclosed alloys also have increased nitrogen solubility thereby enhancing strength at all temperatures because nitride precipitates or nitrogen porosity during casting are not observed. The solubility of nitrogen is dramatically enhanced by the presence of manganese, which also retains or improves the solubility of carbon thereby providing additional solid solution strengthening due to the presence of manganese and nitrogen, and combined carbon.

  16. 238,234U contents on Lepomis Cyanellus from San Marcos dam located in a uraniferous area

    NASA Astrophysics Data System (ADS)

    Lares, Magaly Cabral; Luna-Porres, Mayra Y.; Montero-Cabrera, María E.; Renteria-Villalobos, Marusia

    2014-07-01

    Fish species are suitable biomonitors of radioisotopes in aquatic systems. In the present study, it was made the determination of uranium isotopic contents on fish fillet (Lepomis Cyanellus) from San Marcos dam which is located in uranium mineralized zone. Uranium activity concentrations (AC) in fish samples were obtained on wet weight (ww), using liquid scintillation. 238U and 234U AC in fish fillet ranged from 0.0004 to 0.0167 Bq kg-1, and from 0.0013 to 0.0394 Bq kg-1, respectively. The activity ratio (234U/overflow="scroll">238U) in fish fillet ranged from 2.2 to 8.8. Lepomis cyanellus from San Marcos dam shows bioaccumulation factor (FB) of 0.6 L kg-1. The results suggest that the Lepomis Cyanellus in environments with high U contents tends to have a greater bioaccumulation compared to others.

  17. Plant-uptake of uranium: Hydroponic and soil system studies

    USGS Publications Warehouse

    Ramaswami, A.; Carr, P.; Burkhardt, M.

    2001-01-01

    Limited information is available on screening and selection of terrestrial plants for uptake and translocation of uranium from soil. This article evaluates the removal of uranium from water and soil by selected plants, comparing plant performance in hydroponic systems with that in two soil systems (a sandy-loam soil and an organic-rich soil). Plants selected for this study were Sunflower (Helianthus giganteus), Spring Vetch (Vicia sativa), Hairy Vetch (Vicia villosa), Juniper (Juniperus monosperma), Indian Mustard (Brassica juncea), and Bush Bean (Phaseolus nanus). Plant performance was evaluated both in terms of the percent uranium extracted from the three systems, as well as the biological absorption coefficient (BAC) that normalized uranium uptake to plant biomass. Study results indicate that uranium extraction efficiency decreased sharply across hydroponic, sandy and organic soil systems, indicating that soil organic matter sequestered uranium, rendering it largely unavailable for plant uptake. These results indicate that site-specific soils must be used to screen plants for uranium extraction capability; plant behavior in hydroponic systems does not correlate well with that in soil systems. One plant species, Juniper, exhibited consistent uranium extraction efficiencies and BACs in both sandy and organic soils, suggesting unique uranium extraction capabilities.

  18. A Method for Decreasing the Amount of the Drug Remaining on the Surfaces of the Mortar and Pestle after Grinding Small Amount of Tablets.

    PubMed

    Kawakami, Miki; Kitada, Rika; Kurita, Takuro; Tokumura, Tadakazu

    2017-01-01

    The aim of the present study was to develop a method for grinding tablets with a mortar and pestle while reducing drug loss because grinding tablets is known to be associated with reductions in tablet weight and loss of the active drug. Seven kinds of tablets were subjected to grinding. The proportion (%) of the amount of the active drug in the powder remaining on the surfaces of the mortar and pestle relative to the total amount of the drug recovered (the recovery percent) was calculated. The recovery percent of the 7 kinds of tablets ranged from 17.2-35.9%, and the tablets' recovery percent decreased as the tablet weight increased. When the grinding was performed with 1 g of lactose monohydrate or 1 g of D-mannitol moistened with water, the recovery percent of the tablets decreased to 2.6-9.9% and 3.8-9.9%, respectively. The effects of the weight of lactose monohydrate on the recovery percent of Allegra ® 60 mg tablets were examined. It was found that at least 0.6 g of lactose monohydrate was required to have a sufficient effect on drug recovery. Therefore, additives that have stronger effects at lower amounts were sought. As a result, calcium monohydrogen phosphate was found to have the strongest effect on drug recovery. The addition of 0.4 g calcium monohydrogen phosphate resulted in the recovery percent of 5.1%, which was significantly lower than that of 15.0% observed after the addition of 0.4 g lactose monohydrate, and lower than the 6.8% of 1 g lactose monohydrate.

  19. URANIUM COMPOSITIONS

    DOEpatents

    Allen, N.P.; Grogan, J.D.

    1959-05-12

    This patent relates to high purity uranium alloys characterized by improved stability to thermal cycling and low thermal neutron absorption. The high purity uranium alloy contains less than 0.1 per cent by weight in total amount of any ore or more of the elements such as aluminum, silicon, phosphorous, tin, lead, bismuth, niobium, and zinc.

  20. Unions, Norms, and the Rise in U.S. Wage Inequality

    ERIC Educational Resources Information Center

    Western, Bruce; Rosenfeld, Jake

    2011-01-01

    From 1973 to 2007, private sector union membership in the United States declined from 34 to 8 percent for men and from 16 to 6 percent for women. During this period, inequality in hourly wages increased by over 40 percent. We report a decomposition, relating rising inequality to the union wage distribution's shrinking weight. We argue that unions…

  1. Modelling global methane emissions from livestock: Biological and nutritional controls. Final Report, 1 July 1989-30 June 1992

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, D.E.

    1992-10-01

    The available observations of methane production from the literature have been compiled into a ruminant methane data base. This data base includes 400 treatment mean observations of methane losses from cattle and sheep, and minor numbers of measurements from other species. Methane loss varied from 2.0 to 11.6 percent of dietary gross energy. Measurements included describe the many different weights and physiological states of the animals fed and diets ranging from all forage to all concentrate diets or mixtures. An auxiliary spreadsheet lists approximately 1000 individual animal observations. Many important concepts have emerged from our query and analysis of thismore » data set. The majority of the world's cattle, sheep, and goats under normal husbandry circumstances likely produce methane very close to 6 percent of their daily diets gross energy (2 percent of the diet by weight). Although individual animals or losses from specific dietary research circumstances can vary considerably, the average for the vast majority of groups of ruminant livestock are likely to fall between 5.5 to 6.5 percent. We must caution, however, that little experimental data is available for two-thirds of the world's ruminants in developing countries. Available evidence suggests similar percentage of emissions, but this supposition needs confirmation. More importantly, data is skimpy or unavailable to describe diet consumption, animal weight, and class distribution.« less

  2. Evaluation of refractory-metal-clad uranium nitride and uranium dioxide fuel pins after irradiation for times up to 10 450 hours at 990 C

    NASA Technical Reports Server (NTRS)

    Bowles, K. J.; Gluyas, R. E.

    1975-01-01

    The effects of some materials variables on the irradiation performance of fuel pins for a lithium-cooled space power reactor design concept were examined. The variables studied were UN fuel density, fuel composition, and cladding alloy. All pins were irradiated at about 990 C in a thermal neutron environment to the design fuel burnup. An 85-percent dense UN fuel gave the best overall results in meeting the operational goals. The T-111 cladding on all specimens was embrittled, possibly by hydrogen in the case of the UN fuel and by uranium and oxygen in the case of the UO2 fuel. Tests with Cb-1Zr cladding indicate potential use of this cladding material. The UO2 fueled specimens met the operational goals of less than 1 percent cladding strain, but other factors make UO2 less attractive than low-density UN for the contemplated space power reactor use.

  3. Phytotoxicity of depleted uranium on three grasses characteristic of different successional stages

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Meyer, M.C.; McLendon, T.

    1997-05-01

    In response to a paucity of data on the chemical toxicity of uranium (U) to plants, a factorial experiment employing five U concentrations (0, 50, 500, 5000, 25,000 mg kg{sup -1}) and three moisture regimes (low, medium, and high) was performed using three native grasses. Buchloe dactyloides (buffalograss; mid/late-seral), Schizachyrium scoparium (little bluestem; late-seral), and Aristida purpurea (purple threeawn; early/mid-seral) were grown in monocultures and as a mixture of two species under all combinations of U and moisture levels. This design allowed for the analysis of U effects, as well as possible interactions with moisture stress. Several measures of plantmore » health and viability were made, including: percent emergence, plant survival, shoot biomass, and number and weight of inflorescences. Decreases in plant biomass, fecundity, and long-term survivability were observed only at the highest U level (25 000 mg kg{sup -1}). No significant differences (P < 0.05) between the U treatment levels were observed in terms of seedling emergence and survival. Drought stress also negatively impacted survival and biomass, but acted independently of U stress. 18 refs., 4 figs., 3 tabs.« less

  4. Uranium deposits in Grant County, New Mexico

    USGS Publications Warehouse

    Granger, Harry C.; Bauer, Herman L.; Lovering, Tom G.; Gillerman, Elliot

    1952-01-01

    The known uranium deposits of Grant county, N. Mex., are principally in the White Signal and Black Hawk districts. Both districts are within a northwesterly-trending belt of pre-Cambrian rocks, composed chiefly of granite with included gneisses, schists, and quartzites. Younger dikes and stocks intrude the pre-Cambrian complex. The White Signal district is on the southeast flanks of the Burro Mountains; the Black Hawk district is about 18 miles northwest of the town of White Signal. In the White Signal district the seconday uranium phosphates--autunite and torbernite--occur as fracture coatings and disseminations in oxidized parts of quartz-pyrite veins, and in the adjacent mafic dikes and granites; uraniferous limonite is common locally. Most of the known uraniferous deposits are less that 50 feet in their greatest dimension. The most promising deposits in the district are on the Merry Widow and Blue Jay claims. The richest sample taken from the Merry Widow mine contained more than 2 percent uranium and a sample from the Blue Jay property contained as much as 0.11 percent; samples from the other properties were of lower grade. In the Black Hawk district pitchblende is associated with nickel, silver, and cobalt minerals in fissure veins. The most promising properties in the Black Hawk district are the Black Hawk, Alhambra, and Rose mines. No uranium analyses from this district were available in 1951. There are no known minable reserves of uranium ore in either district, although there is some vein material at the Merry Widow mine of ore grade, if a market were available in the region.

  5. Effects of laminar flow control on the performance of a large span-distributed-load flying-wing cargo airplane concept

    NASA Technical Reports Server (NTRS)

    Jernell, L. S.

    1978-01-01

    The effects of laminar flow control (LFC) on the performance of a large span-distributed-load flying-wing cargo airplane concept having a design payload of 2.669 MN and range of 5.93 Mm were determined. Two configurations were considered. One employed laminarized flow over the entire surfaces of the wing and vertical tails, with the exception of the estimated areas of interference due to the fuselage and engines. The other case differed only in that laminar flow was not applied to the flaps, elevons, spoilers, or rudders. The two cases are referred to as the 100 percent and 80 percent laminar configurations, respectively. The utilization of laminar flow control results in reductions in the standard day, sea level installed maximum static thrust per engine from 240 kN for the non-LFC configuration to 205 kN for the 100 percent laminar configuration and 209 kN for the 80 percent case. Weight increases due to the LFC systems cause increases in the operating empty weights of approximately 3 to 4 percent. The design takeoff gross weights decrease approximately 3 to 5 percent. The FAR-25 takeoff field distances for the LFC configurations are greater by about 6 to 7 percent. Fuel efficiencies for the respective configurations are increased 33 percent and 23 percent.

  6. Translations on USSR Political and Sociological Affairs. No. 799. Republic Leaders’ Speeches on USSR Draft Constitution

    DTIC Science & Technology

    1977-08-04

    grain has risen from 10.4 quintals in 1936 to 27.9 quintals per hectare last year, and the production of meat and milk during this period increased by...farms of the republic, have produced 12.2 percent more meat , 6.6 percent more milk and 11.1 percent more eggs. The average milk yield increased by...1936, Kirgiziya produced 30,000 tons of meat (slaughter weight); now it produces more than ll*0,000 tons. The steady rise in social production has

  7. Occurrence of Uranium and 222Radon in Glacial and Bedrock Aquifers in the Northern United States, 1993-2003

    USGS Publications Warehouse

    Ayotte, Joseph D.; Flanagan, Sarah M.; Morrow, William S.

    2007-01-01

    Water-quality data collected from 1,426 wells during 1993-2003 as part of the U.S. Geological Survey National Water-Quality Assessment (NAWQA) program were evaluated to characterize the water quality in glacial and bedrock aquifers of the northern United States. One of the goals of the NAWQA program is to synthesize data from individual studies across the United States to gain regional- and national-scale information about the behavior of contaminants. This study focused on the regional occurrence and distribution of uranium and 222radon in ground water in the glacial aquifer system of the United States as well as in the Cambrian-Ordovician and the New York and New England crystalline aquifer systems that underlie the glacial aquifer system. The occurrence of uranium and 222radon in ground water has long been a concern throughout the United States. In the glacial aquifers, as well as the Cambrian-Ordovician and the New York and New England crystalline aquifer systems of the United States, concentrations of uranium and 222radon were highly variable. High concentrations of uranium and 222radon affect ground water used for drinking water and for agriculture. A combination of information or data on (1) national-scale ground-water regions, (2) regional-scale glacial depositional models, (3) regional-scale geology, and (4) national-scale terrestrial gamma-ray emissions were used to confirm and(or) refine the regions used in the analysis of the water-chemistry data. Significant differences in the occurrence of uranium and 222radon, based primarily on geologic information were observed and used in this report. In general, uranium was highest in the Columbia Plateau glacial, West-Central glacial, and the New York and New England crystalline aquifer groups (75th percentile concentrations of 22.3, 7.7, and 2.9 micrograms per liter (ug/L), respectively). In the Columbia Plateau glacial and the West-Central glacial aquifer groups, more than 10 percent of wells sampled had concentrations of uranium that exceeded the U.S. Environmental Protection Agency (USEPA) Maximum Contaminant Level of 30 ug/L; in the New York and New England crystalline aquifer group, 4 percent exceeded 30 ug/L. Ground-water samples with high concentrations of uranium were commonly linked to geologic sources rich in uranium. In eight of nine aquifer groups defined for this study, concentrations of uranium correlated significantly with concentrations of sulfate in ground water (Spearman's rho = 0.20 to 0.56; p < 0.05). In the Columbia Plateau, glacial aquifers were derived in part from basaltic lava flows, some felsic volcanic rocks, and some paleo-lake bed materials that may be rich in uranium. In the Columbia Plateau and West-Central glacial aquifer groups, uranium correlated with total dissolved solids, bicarbonate, boron, lithium, selenium, and strontium. In the West-Central glacial aquifer group, rocks such as Cretaceous marine shales, which are abundant in uranium, probably contribute to the high concentrations in ground water; in the southern part of this group, which extends into Nebraska, the glacial or glacial-related sediment may be interbedded with uranium-rich materials that originated to the north and west and in the Rocky Mountains. In New England, crystalline bedrock that is granitic, such as two-mica granites, as well as other high-grade metamorphic rocks, has abundant uranium that is soluble in the predominantly oxic to sub-oxic geochemical conditions. This appears to contribute to high uranium concentrations in ground water. The highest 222radon concentrations were present in samples from wells completed in the New York and New England crystalline aquifer group; the median value (2,122 picocurries per liter (pCi/L)) was about 10 times the median values of all other aquifer groups. More than 25 percent of the samples from the New York and New England crystalline aquifer group wells had 222radon concentrations that exceeded the USEPA Alternative

  8. Interlaboratory comparison of chemical analysis of uranium mononitride

    NASA Technical Reports Server (NTRS)

    Merkle, E. J.; Davis, W. F.; Halloran, J. T.; Graab, J. W.

    1974-01-01

    Analytical methods were established in which the critical variables were controlled, with the result that acceptable interlaboratory agreement was demonstrated for the chemical analysis of uranium mononitride. This was accomplished by using equipment readily available to laboratories performing metallurgical analyses. Agreement among three laboratories was shown to be very good for uranium and nitrogen. Interlaboratory precision of + or - 0.04 percent was achieved for both of these elements. Oxygen was determined to + or - 15 parts per million (ppm) at the 170-ppm level. The carbon determination gave an interlaboratory precision of + or - 46 ppm at the 320-ppm level.

  9. 12 CFR 167.6 - Risk-based capital credit risk-weight categories.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... (iii) 50 percent Risk Weight (Category 3). (A) Revenue bonds issued by any public-sector entity in an....g., industrial development bonds; (J) Debt securities not otherwise described in this section; (K... interest rate risk of its government bond portfolio will not increase the risk weight of that fund above...

  10. 46 CFR 164.009-15 - Test procedure.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... seconds. (4) The average weight loss of the specimens after heating is not more than 50 percent of their... described in paragraphs (b) through (k) of this section, except the average weight loss of the sample is... weighed while still hot. (6) The average weight loss of the specimens after heating may not be more than...

  11. Weight loss and retention in a commercial weight-loss program and the effect of corporate partnership.

    PubMed

    Martin, C K; Talamini, L; Johnson, A; Hymel, A M; Khavjou, O

    2010-04-01

    No studies report whether improvements to commercial weight-loss programs affect retention and weight loss. Similarly, no studies report whether enrolling in a program through work (with a corporate partner) affects retention and weight loss. To determine whether: (1) adding evidence-based improvements to a commercial weight-loss program increased retention and weight loss, (2) enrolling in a program through work increased retention and weight loss and (3) whether increased weight loss was because of longer retention. Data were collected on 60 164 adults who enrolled in Jenny Craig's Platinum Program over 1 year in 2001-2002. The program was subsequently renamed the Rewards Program and improved by increasing treatment personalization and including motivational interviewing. Data were then collected on 81 505 participants of the Rewards Program who enrolled during 2005 (2418 of these participants enrolled through their employer, but paid out-of-pocket). Retention (participants were considered active until >or=42 consecutive days were missed) and weight loss (percent of original body weight) from baseline to the last visit (data were evaluated through week 52) were determined. Alpha was set at 0.001. Mean (95% confidence interval (CI)) retention (weeks) was significantly higher among Rewards (19.5 (19.4-19.6)) compared with Platinum (16.3 (16.2-16.4)) participants, and Rewards Corporate (25.9 (25.0-26.8)) compared with Noncorporate (21.9 (21.7-22.1)) participants. Modified intent-to-treat analyses indicated that mean (95% CI) percent weight loss was significantly larger among Rewards (6.36 (6.32-6.40)) compared with Platinum (5.45 (5.41-5.49)) participants, and Rewards Corporate (7.16 (6.92-7.40)) compared with Noncorporate (6.20 (6.16-6.24)) participants, with and without adjustment for baseline participant characteristics. In all cases, greater weight loss was secondary to longer retention. The study was not a randomized controlled trial, rather, a translational effectiveness study. Improvements to a commercial program and enrolling through a corporate partner are associated with greater weight loss that is because of improved retention.

  12. Examination of T-111 clad uranium nitride fuel pins irradiated up to 13,000 hours at a clad temperature of 990 C

    NASA Technical Reports Server (NTRS)

    Slaby, J. G.; Siegel, B. L.

    1973-01-01

    The examination of 27 fuel pins irradiated for up to 13,000 hours at 990 C is described. The fuel pin clad was a tantalum alloy with uranium nitride as the nuclear fuel. Two nominal fuel pin diameters were tested with a maximum burnup of 2.34 atom percent. Twenty-two fuel pins were tested for fission gas leaks; thirteen pins leaked. Clad ductility tests indicated clad embrittlement. The embrittlement is attributed to hydrogen from an n,p reaction in the fuel. Fuel swelling was burnup dependent, and the amount of fission gas release was low, generally less than 0.5 percent. No incompatibilities between fuel, liner, and clad were in evidence.

  13. Label Identification from Statistical Tabulation (LIST) temporal extendability study. [North Dakota, South Dakota, and Minnesota

    NASA Technical Reports Server (NTRS)

    Dennis, T. B. (Principal Investigator)

    1980-01-01

    The author has identified the following significant results. The most apparent contributors to the problem of poor temporal extension of LIST are the drastic changes in the brightness keys and an inadequate set of AI responses in Phase 3. The brightness trajectories change drastically from Phase 3 to the transition year (TY). Removing brightness channels from the discriminant does not completely correct the lack of extendability. Removing brightness increases the accuracy of the extension from Phase 3 to TY from 57.7 percent to 64.18 percent. The removal of the Al keys increases accuracy to 65.76 percent. Although the latter increase appears insignificant when compared to the first, the removal of only the Al keys increased accuracy to 63.58 percent. Proper weighting of the responses explains 73.8 percent of the ground truth labels but only 56.7 percent of the Al labels. By contrast, the TY responses which were weighted to explain the TY ground truth labels fared equally well, explaining 73.6 percent of those labels and 87.1 percent of the Al labels.

  14. 31 CFR 540.318 - Uranium Hexafluoride (UF6).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Uranium Hexafluoride (UF6). 540.318... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.318 Uranium Hexafluoride (UF6). The term uranium...

  15. 31 CFR 540.318 - Uranium Hexafluoride (UF6).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Uranium Hexafluoride (UF6). 540.318... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.318 Uranium Hexafluoride (UF6). The term uranium...

  16. 31 CFR 540.318 - Uranium Hexafluoride (UF6).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Uranium Hexafluoride (UF6). 540.318... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.318 Uranium Hexafluoride (UF6). The term uranium...

  17. 31 CFR 540.318 - Uranium Hexafluoride (UF6).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Uranium Hexafluoride (UF6). 540.318... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.318 Uranium Hexafluoride (UF6). The term uranium...

  18. 31 CFR 540.318 - Uranium Hexafluoride (UF6).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Uranium Hexafluoride (UF6). 540.318... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.318 Uranium Hexafluoride (UF6). The term uranium...

  19. Uranophane at Silver Cliff mine, Lusk, Wyoming

    USGS Publications Warehouse

    Wilmarth, Verl R.; Johnson, D.H.

    1954-01-01

    The uranium deposit at the Silver Cliff mine near Lusk, Wyo., consists primarily of uranophane which occurs as fracture fillings and small replacement pockets in faulted and fractured calcareous sandstone of Cambrian (?) age. The country rock in the vicinity of the mine is schist of pre-Cambrian age intruded by pegmatite dikes and is unconformably overlain by almost horizontal sandstone of Cambrian(?) age. The mine is on the southern end of the Lusk Dome, a local structure probably related to the Hartville uplift. In the immediate vicinity of the mine, the dome is cut by the Silver Cliff fault, a north-trending high-angle reverse fault about 1,200 feet in length with a stratigraphic throw of 70 feet. Uranophane, metatorbernite, pitchblende, calcite, native silver, native copper, chalcocite, azurite, malachite, chrysocolla, and cuprite have been deposited in fractured sandstone. The fault was probably mineralized throughout its length, but because of erosion, the mineralized zone is discontinuous. The principal ore body is about 800 feet long. The width and depth of the mineralized zone are not accurately known but are at least 20 feet and 60 feet respectively. The uranium content of material sampled in the mine ranges from 0.001 to 0.23 percent uranium, whereas dump samples range from 0.076 to 3.39 percent uranium.

  20. A reconnaissance for uranium in carbonaceous rocks in southwestern Colorado and parts of New Mexico

    USGS Publications Warehouse

    Baltz, Elmer H.

    1955-01-01

    Coal and carbonaceous shale of the Dakota formation of Cretaceous age were examined for radioactivity in the Colorado Plateau of southwestern Colorado and northwestern New l1exico during the summer of 1953. Older and younger sedimentary rocks and some igneous rocks also were examined, but in less detail, Weak radioactivity was detected at many places but no new deposits of apparent economic importance were discovered. The highest radioactivity of carbonaceous rocks was detected in black shale, siltstone, and sandstone of the Paradox member of the Hermosa formation of Pennsylvanian age. A sample collected from this member at the Bald Eagle prospect in Gypsum Valley, San Higuel County, Colo. contains 0.10. percent uranium. Carbonaceous rocks were investigated at several localities on the Las Vegas Plateau and the Canadian Escarpment in Harding and San Miguel Counties, northeastern New Mexico. Carbonaceous sandstone and siltstone in the middle sandstone member of the Chinle formation of Triassic age contain uranium at a prospect of the Hunt Oil Company southwest of Sabinoso in northeastern San Miguel County, N. Mex. A channel sample across 3.2 feet of mineralized rocks at this locality contains 0.22 percent uranium. Weak radioactivity was detected at two localities in carbonaceous shale of the Dakota and Purgatoire formations of Cretaceous age.

  1. The uranium deposit at the Yellow Canary claims, Daggett County, Utah

    USGS Publications Warehouse

    Wilmarth, V.R.; Vickers, R.C.; McKeown, F.A.; Beroni, E.P.

    1952-01-01

    The Yellow Canary claims uranium deposit is on the west side of Red Creek Canyon in the northern part of the Uinta Mountains, Daggett County, Utah. The claims have been developed by two adits, three open cuts, and several hundred deep of bulldozer trenches. No uranium ore has been produced from this deposit. The uranium deposit at the Yellow Canary claims is in the Red Creek quartzite of pre-Cambrian age. The formation is composed of intercalated beds of quartzite, hornblendite, garnet schist, staurolite schist, and quartz-mica schist and is intruded by diorite dikes. A thick unit of highly fractured white quatrzite at the top of the formation contains tyutamunite as coatings on fracture surfaces. The tyutamunite is associated with carnotite, volborthite, iron oxides, azurite, malachite, brochantite, and hyalite. The secondary uranium and vanadium minerals are believed to be alteration products of primary minerals. The uranium content of 15 samples from this property ranged from 0.000 to 0.57 percent.

  2. TERNARY ALLOYS OF URANIUM, COLUMBIUM, AND ZIRCONIUM

    DOEpatents

    Foote, F.G.

    1960-08-01

    Ternary alloys of uranium are described which are useful as neutron- reflecting materials in a fast neutron reactor. They are especially resistant to corrosion caused by oxidative processes of gascous or aqueous origin and comprise uranium as the predominant metal with zirconiunn and niobium wherein the total content of the minor alloying elements is between 2 and 8% by weight.

  3. Removal of uranium from aqueous HF solutions

    DOEpatents

    Pulley, Howard; Seltzer, Steven F.

    1980-01-01

    This invention is a simple and effective method for removing uranium from aqueous HF solutions containing trace quantities of the same. The method comprises contacting the solution with particulate calcium fluoride to form uranium-bearing particulates, permitting the particulates to settle, and separting the solution from the settled particulates. The CaF.sub.2 is selected to have a nitrogen surface area in a selected range and is employed in an amount providing a calcium fluoride/uranium weight ratio in a selected range. As applied to dilute HF solutions containing 120 ppm uranium, the method removes at least 92% of the uranium, without introducing contaminants to the product solution.

  4. Yellow Canary uranium deposits, Daggett County, Utah

    USGS Publications Warehouse

    Wilmarth, Verl Richard

    1953-01-01

    The Yellow Canary uranium deposit is on the west side of Red Creek Canyon in the northern part of the Uinta Mountains, Daggett County, Utah. Two claims have been developed by means of an adit, three opencuts, and several hundred feet of bulldozer trenches. No uranium ore has been produced from this deposit. The deposit is in the pre-Cambrian Red Creek quartzite. This formation is composed of intercalated beds of quartzite, hornblendite, garnet schist, staurolite schist, and quartz-mica schist and is intruded by dioritic dikes. A thick unit of highly fractured white quartzite near the top of the formation contains tyuyamunite as coatings on fracture surfaces. The tyuyamunite is associated with carnotite, volborthite, iron oxides, azurite, malachite, brochantite, and hyalite. The uranium and vanadium minerals are probably alteration products of primary minerals. The uranium content of 15 samples from this property ranged from 0.000 to 0.57 percent.

  5. Ductile tungsten-nickel-alloy and method for manufacturing same

    DOEpatents

    Ludwig, Robert L.

    1978-01-01

    The tensile elongation of a tungsten-nickel-iron alloy containing essentially 95 weight percent reprocessed tungsten, 3.5 weight percent nickel, and 1.5 weight percent iron is increased from a value of less than about 1 percent up to about 23 percent by the addition of less than 0.5 weight percent of a reactive metal consisting of niobium and zirconium.

  6. Natural chelates for radionuclide decorporation

    DOEpatents

    Premuzic, E.T.

    1983-08-25

    This invention relates to the method and resulting chelates of desorbing a radionuclide selected from thorium, uranium, and plutonium containing cultures in a bioavailable form involving pseudomonas or other microorganisms. A preferred microorganism is Pseudomonas aeruginosa which forms multiple chelates with thorium in the range of molecular weight 1000 to 1000 and also forms chelates with uranium of molecular weight in the area of 100 to 1000 and 1000 to 2000.

  7. Status and understanding of groundwater quality in the central-eastside San Joaquin Basin, 2006: California GAMA Priority Basin Project

    USGS Publications Warehouse

    Landon, Matthew K.; Belitz, Kenneth; Jurgens, Bryant C.; Kulongoski, Justin T.; Johnson, Tyler D.

    2010-01-01

    Groundwater quality in the approximately 1,695-square-mile Central Eastside San Joaquin Basin (Central Eastside) study unit was investigated as part of the Priority Basin Project (PBP) of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA PBP was developed in response to the California Groundwater Quality Monitoring Act of 2001, and is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey and the Lawrence Livermore National Laboratory. The GAMA Central Eastside study unit was designed to provide a spatially unbiased assessment of untreated-groundwater quality, as well as a statistically consistent basis for comparing water quality throughout California. During March through June 2006, samples were collected from 78 wells in Stanislaus and Merced Counties, 58 of which were selected using a spatially distributed, randomized grid-based method to provide statistical representation of the study unit (grid wells), and 20 of which were sampled to evaluate changes in water chemistry along groundwater-flow paths (understanding wells). Water-quality data from the California Department of Public Health (CDPH) database also were used for the assessment.An assessment of the current status of the groundwater quality included collecting samples from wells for analysis of anthropogenic constituents such as volatile organic compounds (VOCs) and pesticides, as well as naturally occurring constituents such as major ions and trace elements. The assessment of status is intended to characterize the quality of untreated-groundwater resources within the primary aquifer system, not the treated drinking water delivered to consumers by water purveyors. The primary aquifer system (hereinafter, primary aquifer) is defined as that part of the aquifer corresponding to the perforation interval of wells listed in the CDPH database for the Central Eastside study unit. The quality of groundwater in shallower or deeper water-bearing zones may differ from that in the primary aquifer; shallower groundwater may be more vulnerable to surficial contamination. The primary aquifer is represented by the grid wells, of which 90 percent had depths to the tops of their perforations of about 80 to 330 feet and depths to bottom of about 100 to 670 feet. Relative-concentrations (sample concentration divided by benchmark concentration) were used as the primary metric for assessing the status of water quality for those constituents that have Federal and (or) California human health or aesthetic benchmarks. A relative-concentration greater than (>) 1.0 indicates a concentration above a benchmark, and less than or equal to (≤) 1.0 indicates a concentration equal to or below a benchmark. For organic and special interest constituents, relative-concentrations were classified as high (>1.0), moderate (≤1.0 and >0.1), or low (≤0.1). For inorganic constituents, relative-concentrations were classified as high (>1.0), moderate (≤1.0 and >0.5), or low (≤0.5). The threshold between low and moderate classifications was lower for organic and special interest constituents than for inorganic constituents because organic constituents generally are less prevalent and have smaller relative-concentrations than inorganic constituents.Grid-based and spatially-weighted approaches, the latter incorporating data from all CDPH wells, were used to evaluate the proportion of the primary aquifer (aquifer-scale proportions) with high, moderate, or low relative-concentrations. For individual constituents or classes of constituents, the aquifer-scale high proportion is the percentage of the area of the study unit having high relative-concentrations within the depth-zones of the primary aquifer. Aquifer-scale moderate and low proportions are defined similarly. Spatially-weighted aquifer-scale high proportions nearly always fell within the 90-percent confidence interval of grid-based aquifer-scale high proportions, indicating that the grid-based approach yielded statistically equivalent results to the spatially-weighted approach incorporating CDPH data.The status assessment for inorganic constituents showed that inorganic constituents (one or more) were high, relative to human-health benchmarks, in 18.0 percent of the primary aquifer, moderate in 44.0 percent, and low in 38.0 percent. Of inorganic constituents with human-health benchmarks, arsenic, vanadium, and nitrate were detected at high relative-concentrations in 15.6 percent, 3.6 percent, and 2.1 percent, respectively, of the primary aquifer. Of inorganic constituents with secondary maximum contaminant levels (SMCL), manganese, iron, and TDS were detected at high relative-concentrations in 4.5 percent, 2.2 percent, and 1.7 percent, respectively, of the primary aquifer.The status assessment for organic constituents showed that organic constituents (one or more) were high, relative to human-health benchmarks, in a smaller proportion of the primary aquifer (1.2 percent) than inorganic constituents (18.0 percent). Organic constituents had moderate relative-concentrations in 14.3 percent, and had low relative-concentrations or were not detected in 84.5 percent, of the primary aquifer. The proportion of the primary aquifer with high relative-concentrations of organic constituents reflected high proportions of the discontinued soil fumigant 1,2-dibromo-3-chlororopane (DBCP; 1.0 percent) and the solvent tetrachloroethene (PCE; 0.2 percent). Most of the organic and special interest constituents detected in groundwater in the Central Eastside study unit have human-health benchmarks. Of the 205 organic and special interest constituents analyzed for, 36 constituents were detected. Of these constituents, 32 were detected only at low relative-concentrations. Four constituents, chloroform, carbon tetrachloride, DBCP, and perchlorate, were detected at moderate relative-concentrations in grid wells. Nine organic and special-interest constituents were detected frequently (detected in greater than 10 percent of samples): the trihalomethanes chloroform, bromoform, bromodichloromethane, and dibromochloromethane; the solvent PCE; the herbicides atrazine, simazine, and metolachlor, and special-interest constituent perchlorate.An assessment of understanding of the groundwater quality included sampling of understanding wells, some of which were perforated in shallower or deeper portions of the aquifer system than the primary aquifer, and analysis of correlations of groundwater quality with land use, depth, age classification, and other potential explanatory factors.The understanding assessment indicated that the concentrations of many constituents were related to depth and groundwater age. However, concentrations of individual constituents or constituent classes also were sometimes related to geochemical conditions, lateral position in the flow system, or land use.High and moderate relative-concentrations of uranium, nitrate, and total dissolved solids (TDS) were detected in some wells where the tops of perforations are within the upper 200 feet of the aquifer system. In wells with the depth to the top of perforations below this depth, concentrations were low. A similar pattern occurred for the sum of herbicide concentrations. These vertical water-chemistry patterns are consistent with the hydrogeologic setting, in which return flows from agricultural and urban land use are the major source of recharge, and withdrawals for irrigation and urban supply are the major source of discharge, resulting in substantial vertical components of groundwater flow.The decrease in concentrations of many constituents with depth reflects in part that groundwater gets older with depth. Tritium, helium-isotopes, and carbon-14 data were used to classify the predominant age of groundwater samples into three categories: modern (water that has entered the aquifer in the last 50 years), pre-modern (water that entered the aquifer more than 50 years, up to tens of thousands of years, ago), and mixed (mixtures of waters with modern and pre-modern ages). Uranium, nitrate, and herbicide concentrations were significantly higher in groundwater having modern- and mixed-ages than pre-modern ages, indicating that these constituents may be affected by anthropogenic activities in the last 50 years.Other patterns in the distribution of nitrate, uranium, and TDS are evident. Isotopic and geochemical data are consistent with partial denitrification of nitrate in some reducing groundwaters in the western and deeper parts of the flow system. Uranium and TDS concentrations increase from east to west across the valley, along the direction of regional lateral groundwater flow.High and moderate relative-concentrations of arsenic can be attributed to reductive dissolution of manganese or iron oxides, or to desorption by high pH waters. Arsenic concentrations also increased with increasing depth and groundwater age. High to moderate relative-concentrations of vanadium primarily are related to high pH under oxic conditions.The frequency of detections of DBCP was greater in areas with orchard-vineyard land use >40 percent and at depths <200 feet. THMs and solvents were correlated positively with percent urban land use. Herbicide concentrations were correlated negatively with percent natural land use. Perchlorate concentrations were significantly greater in waters having modern and mixed ages than waters having pre-modern ages and were significantly and positively correlated with two land uses—percent orchard/vineyard land use and percent urban land use.

  8. The Black dentist workforce in the United States.

    PubMed

    Mertz, Elizabeth; Calvo, Jean; Wides, Cynthia; Gates, Paul

    2017-03-01

    The purpose of this paper is to describe the Black dentist workforce, the practice patterns of providers, and their contributions to oral health care for minority and underserved patients. A national sample survey of underrepresented minority dentists was conducted in 2012 and received a 32.6 percent response rate for self-reported Black dentists. Data were weighted for selection and response bias to be nationally representative. Descriptive and multivariable statistics were computed to provide a workforce profile of Black dentists. National comparisons are provided from published data. Among all Black dentists (weighted n = 6,254), 76.6 percent self-identify as African-American, 13.2 percent as African, and 10.3 percent as Afro-Caribbean. The largest share of Black dentists are male, married, heterosexual, born in the United States and raised in a medium to large city. One third of Black dentists were the first in their family to graduate from college. Black dentists report higher average educational debt than all dental students, with graduates from International Dentist Programs having the greatest debt. Traditional practices (i.e., private practices) dominate, with 67.1 percent of Black dentists starting out in this setting and 73.5 percent currently in the setting. Black dentists care for a disproportionate share of Black patients, with an average patient mix that is 44.9 percent Black. Two in five Black dentists reported their patient pool is made up of more than 50 percent Black patients. The underrepresentation for Black dentists is extraordinary, and the Black dentists that are in practice are shouldering a disproportionate share of dental care for minority and underserved communities. © 2016 American Association of Public Health Dentistry.

  9. 7 CFR 983.6 - Assessed weight.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA... pistachios, with the weight computed at 5 percent moisture, received for processing by a handler within each... inshell pistachios that may be recommended by the Committee and approved by the Secretary. [74 FR 56539...

  10. Analyzing the thermionic reactor critical experiments. [thermal spectrum of uranium 235 core

    NASA Technical Reports Server (NTRS)

    Niederauer, G. F.

    1973-01-01

    The Thermionic Reactor Critical Experiments (TRCE) consisted of fast spectrum highly enriched U-235 cores reflected by different thicknesses of beryllium or beryllium oxide with a transition zone of stainless steel between the core and reflector. The mixed fast-thermal spectrum at the core reflector interface region poses a difficult neutron transport calculation. Calculations of TRCE using ENDF/B fast spectrum data and GATHER library thermal spectrum data agreed within about 1 percent for the multiplication factor and within 6 to 8 percent for the power peaks. Use of GAM library fast spectrum data yielded larger deviations. The results were obtained from DOT R Theta calculations with leakage cross sections, by region and by group, extracted from DOT RZ calculations. Delineation of the power peaks required extraordinarily fine mesh size at the core reflector interface.

  11. The Effects of Metformin and Weight Loss on Biomarkers Associated With Breast Cancer Outcomes.

    PubMed

    Patterson, Ruth E; Marinac, Catherine R; Sears, Dorothy D; Kerr, Jacqueline; Hartman, Sheri J; Cadmus-Bertram, Lisa; Villaseñor, Adriana; Flatt, Shirley W; Godbole, Suneeta; Li, Hongying; Laughlin, Gail A; Oratowski-Coleman, Jesica; Parker, Barbara A; Natarajan, Loki

    2018-05-18

    This study investigated the effects of metformin and weight loss on biomarkers associated with breast cancer prognosis. Overweight/obese postmenopausal breast cancer survivors (n = 333) were randomly assigned to metformin vs placebo and to a weight loss intervention vs control (ie, usual care). The 2 × 2 factorial design allows a single randomized trial to investigate the effect of two factors and interactions between them. Outcomes were changes in fasting insulin, glucose, C-reactive protein (CRP), estradiol, testosterone, and sex-hormone binding globulin (SHBG). The trial was powered for a main effects analysis of metformin vs placebo and weight loss vs control. All tests of statistical significance were two-sided. A total of 313 women (94.0%) completed the six-month trial. High prescription adherence (ie, ≥80% of pills taken) ranged from 65.9% of participants in the metformin group to 81.3% of those in the placebo group (P < .002). Mean percent weight loss was statistically significantly higher in the weight loss group (-5.5%, 95% confidence interval [CI] = -6.3% to -4.8%) compared with the control group (-2.7%, 95% CI = -3.5% to -1.9%). Statistically significant group differences (ie, percent change in metformin group minus placebo group) were -7.9% (95% CI = -15.0% to -0.8%) for insulin, -10.0% (95% CI = -18.5% to -1.5%) for estradiol, -9.5% (95% CI = -15.2% to -3.8%) for testosterone, and 7.5% (95% CI = 2.4% to 12.6%) for SHBG. Statistically significant group differences (ie, percent change in weight loss group minus placebo group) were -12.5% (95% CI = -19.6% to -5.3%) for insulin and 5.3% (95% CI = 0.2% to 10.4%) for SHBG. As adjuvant therapy, weight loss and metformin were found to be a safe combination strategy that modestly lowered estrogen levels and advantageously affected other biomarkers thought to be on the pathway for reducing breast cancer recurrence and mortality.

  12. Uranium concentrations in groundwater, northeastern Washington

    USGS Publications Warehouse

    Kahle, Sue C.; Welch, Wendy B.; Tecca, Alison E.; Eliason, Devin M.

    2018-04-18

    A study of uranium in groundwater in northeastern Washington was conducted to make a preliminary assessment of naturally occurring uranium in groundwater relying on existing information and limited reconnaissance sampling. Naturally occurring uranium is associated with granitic and metasedimentary rocks, as well as younger sedimentary deposits, that occur in this region. The occurrence and distribution of uranium in groundwater is poorly understood. U.S. Environmental Protection Agency (EPA) regulates uranium in Group A community water systems at a maximum contaminant level (MCL) of 30 μg/L in order to reduce uranium exposure, protect from toxic kidney effects of uranium, and reduce the risk of cancer. However, most existing private wells in the study area, generally for single family use, have not been sampled for uranium. This document presents available uranium concentration data from throughout a multi-county region, identifies data gaps, and suggests further study aimed at understanding the occurrence of uranium in groundwater.The study encompasses about 13,000 square miles (mi2) in the northeastern part of Washington with a 2010 population of about 563,000. Other than the City of Spokane, most of the study area is rural with small towns interspersed throughout the region. The study area also includes three Indian Reservations with small towns and scattered population. The area has a history of uranium exploration and mining, with two inactive uranium mines on the Spokane Indian Reservation and one smaller inactive mine on the outskirts of Spokane. Historical (1977–2016) uranium in groundwater concentration data were used to describe and illustrate the general occurrence and distribution of uranium in groundwater, as well as to identify data deficiencies. Uranium concentrations were detected at greater than 1 microgram per liter (μg/L) in 60 percent of the 2,382 historical samples (from wells and springs). Uranium concentrations ranged from less than 1 to 88,600 μg/L, and the median concentration of uranium in groundwater for all sites was 1.4 μg/L.New (2017) uranium in groundwater concentration data were obtained by sampling 13 private domestic wells for uranium in areas without recent (2000s) water-quality data. Uranium was detected in all 13 wells sampled for this study; concentrations ranged from 1.03 to 1,180 μg/L with a median of 22 μg/L. Uranium concentrations of groundwater samples from 6 of the 13 wells exceeded the MCL for uranium. Uranium concentrations in water samples from two wells were 1,130 and 1,180 μg/L, respectively; nearly 40 times the MCL.Additional data collection and analysis are needed in rural areas where self-supplied groundwater withdrawals are the primary source of water for human consumption. Of the roughly 43,000 existing water wells in the study area, only 1,755 wells, as summarized in this document, have available uranium concentration data, and some of those data are decades old. Furthermore, analysis of area groundwater quality would benefit from a more extensive chemical-analysis suite including general chemistry in order to better understand local geochemical conditions that largely govern the mobility of uranium. Although the focus of the present study is uranium, it also is important to recognize that there are other radionuclides of concern that may be present in area groundwater.

  13. 12 CFR 3.52 - Simple risk-weight approach (SRWA).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... this paragraph (b). (1) Zero percent risk weight equity exposures. An equity exposure to a sovereign... International Monetary Fund, an MDB, and any other entity whose credit exposures receive a zero percent risk weight under § 3.32 may be assigned a zero percent risk weight. (2) 20 percent risk weight equity...

  14. FABRICATION OF URANIUM-ALUMINUM ALLOYS

    DOEpatents

    Saller, H.A.

    1959-12-15

    A process is presented for producing a workable article of a uranium- aluminum alloy in which the uranium content is between 14 and 70% by weight; aluminum powder and powdered UAl/sub 2/, UAl/sub 3/, UAl/sub 5/, or UBe/sub 9/ are mixed, and the mixture is compressed into the shape desired and sintered at between 450 and 600 deg C.

  15. Evaluation of Non-Oxide Fuel for Fission-based Nuclear Reactors on Spacecraft

    DTIC Science & Technology

    smaller and potentially lighter core, whichis a significant advantage. The results of this study indicate that use of both UC and UN may result in significant weight savings due tohigher uranium loading density....The goal of this project was to study the performance of atypical uranium-based fuels in a nuclear reactor capable of producing 1 megawattof thermal...UN), or uranium carbide (UC) and compared their performance to uranium oxide (UO2) which is thefuel form used in the vast majority of commercial

  16. METHOD OF SEPARATING URANIUM FROM ALLOYS

    DOEpatents

    Chiotti, P.; Shoemaker, H.E.

    1960-06-28

    Uranium can be recovered from metallic uraniumthorium mixtures containing uranium in comparatively small amounts. The method of recovery comprises adding a quantity of magnesium to a mass to obtain a content of from 48 to 85% by weight; melting and forming a magnesium-thorium alloy at a temperature of between 585 and 800 deg C; agitating the mixture, allowing the mixture to settle whereby two phases, a thorium-containing magnesium-rich liquid phase and a solid uranium-rich phase, are formed; and separating the two phases.

  17. Recovery of uranium values

    DOEpatents

    Brown, K. B.; Crouse, Jr., D. J.; Moore, J. G.

    1959-03-10

    A liquid-liquid extraction method is presented for recovering uranium values from an aqueous acidic solution by means of certain high molecular weight amine fn the amine classes of primary, secondary, heterocyclic secondary, tertiary, or heterocyclic tertiary. The uranium bearing aqueous acidic solution is contacted with the selected anine dissolved in a nonpolar waterimmiscible organfc solvent such as kerosene. The uranium which is substantially completely extracted by the organic phase may be stripped therefrom by water, and recovered from the aqueous phase by treatment into ammonia to precipitate ammonium diuranate.

  18. RECOVERY OF URANIUM VALUES

    DOEpatents

    Brown, K.B.; Crouse, D.J. Jr.; Moore, J.G.

    1959-03-10

    A liquid-liquid extraction method is presented for recovering uranium values from an aqueous acidic solution by means of certain high molecular weight amine in the amine classes of primary, secondary, heterocyclic secondary, tertiary, or heterocyclic tertiary. The uranium bearing aqueous acidic solution is contacted with the selected amine dissolved in a nonpolar water-immiscible organic solvent such as kerosene. The uranium which is substantially completely exiracted by the organic phase may be stripped therefrom by waters and recovered from the aqueous phase by treatment into ammonia to precipitate ammonium diuranate.

  19. High strength alloys for high temperature service in liquid-salt cooled energy systems

    DOEpatents

    Holcomb, David E.; Muralidharan, Govindarajan; Wilson, Dane F.

    2017-01-10

    An essentially cobalt-free alloy consists essentially of, in terms of weight percent: 6.3 to 7.2 Cr, 0.5 to 2 Al, 0 to 5 Fe, 0.7 to 0.8 Mn, 9 to 12.5 Mo, 0 to 6 Ta, 0.75 to 3.5 Ti, 0.01 to 0.25 Nb, 0.2 to 0.6 W, 0.02 to 0.04 C, 0 to 0.001 B, 0.0001 to 0.002 N, balance Ni. The alloy is characterized by a .gamma.' microstructural component in the range of 3 to 17.6 weight percent of the total composition. The alloy is further characterized by, at 850.degree. C., a yield strength of at least 60 Ksi, a tensile strength of at least 70 Ksi, a creep rupture life at 12 Ksi of at least 700 hours, and a corrosion rate, expressed in weight loss [g/(cm.sup.2sec)]10.sup.-11 during a 1000 hour immersion in liquid FLiNaK at 850.degree. C., in the range of 5.5 to 17.

  20. PRETREATING URANIUM FOR METAL PLATING

    DOEpatents

    Wehrmann, R.F.

    1961-05-01

    A process is given for anodically treating the surface of uranium articles, prior to metal plating. The metal is electrolyzed in an aqueous solution of about 10% polycarboxylic acid, preferably oxalic acid, from 1 to 5% by weight of glycerine and from 1 to 5% by weight of hydrochloric acid at from 20 to 75 deg C for from 30 seconds to 15 minutes. A current density of from 60 to 100 amperes per square foot is used.

  1. Reconnaissance for radioactive rocks in the Paulo Afonso Region, Bahia, Brazil

    USGS Publications Warehouse

    Haynes, Donald D.; Mau, Henry

    1958-01-01

    Ground and air traverses were made to the northwest, north and northeast of Paulo Afonso, Bahia, Brazil, covering Precambrian crystalline rocks and sedimentary rocks of the Jatoba series of Jurassic or Cretaceous age. No important radioactivity anomalies were found; samples from the two strongest anomalies had an equivalent uranium-oxide content of 0.002 percent and 0.006 percent.

  2. Preliminary developments of MTR plates with uranium nitride

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Durand, J.P.; Laudamy, P.; Richter, K.

    1997-08-01

    In the opinion of CERCA, the total weight of Uranium per MTR plate (without changing the external dimensions) cannot be further increased using U{sub 3}Si{sub 2}. Limits have been reached on plates with a thicker meat or loaded to 6g Ut/cm{sup 3}. The use of a denser fuel like Uranium mononitride could permit an increase in these limits. A collaboration between the Institute for Transuranium Elements (ITU), Joint Research Centre of the European Commission, and CERCA has been set ut. The preliminary studies at the ITU to check compatibility between aluminium and UN proved that there are no metallurgical interactionsmore » below 500{degrees}C. Feasibility of the manufacturing, on a laboratory scale at CERCA, of depleted Uranium mononitride plates loaded to 7 g Ut/cm{sup 3} has been demonstrated. The manufacturing process, however, is only one aspect of the development of a new fuel. The experience gained in the case of U{sub 3}Si{sub 2} has shown that the development of a new fuel requires considerable time and financial investment. Such a development certainly represents an effort of about 10 years.« less

  3. Particulate Titanium Matrix Composites Tested--Show Promise for Space Propulsion Applications

    NASA Technical Reports Server (NTRS)

    Lerch, Bradley A.; Ellis, J. Rodney; Arnold. Steven M.

    2004-01-01

    Uniformly distributed particle-strengthened titanium matrix composites (TMCs) can be manufactured at lower cost than many types of continuous-fiber composites. The innovative manufacturing technology combines cold and hot isostatic pressing procedures to produce near-final-shape components. Material stiffness is increased up to 26-percent greater than that of components made with conventional titanium materials at no significant increase in the weight. The improved mechanical performance and low-cost manufacturing capability motivated an independent review to assess the improved properties of ceramic titanium carbide (TiC) particulate-reinforced titanium at elevated temperature. Researchers at the NASA Glenn Research Center creatively designed and executed deformation and durability tests to reveal operating regimes where these materials could lower the cost and weight of space propulsion systems. The program compares the elevated-temperature performance of titanium alloy Ti-6Al-4V matrix material to an alloy containing 10 wt% of TiC particles. Initial experiments showed that at these relatively low particle concentrations the material stiffness of the TMC was improved 20 percent over that of the plain Ti-6Al-4V alloy when tested at 427 C. The proportional limit and ultimate strength of the composite in tension are 21- and 14-percent greater than those of the plain alloy. Compression tests showed that the proportional limit is about 30 percent greater for TMC than for the plain alloy. The enhanced deformation resistance of the TMC was also evident in a series of tensile and compressive stress relaxation tests that were made. Specimens were subjected to tensile or compressive strain amplitudes of 0.75 percent for 24 hr followed by a return to zero strain imposed for 24 hr. The stress relaxation data were normalized with respect to the maximum stress for each case and plotted as a function of time in the following graph. Tensile stresses relaxed 19 percent for the TMC and 25 percent for the plain Ti-6Al-4V alloy. Compressive stresses relaxed 25 percent for the TMC and 39 percent for the plain Ti-6Al-4V alloy. The superior deformation resistance of the TMC extends to a creep rate that is 28-percent slower for the TMC when it is loaded to stress levels that are 26-percent higher than for the plain Ti-6Al-4V alloy.

  4. Body weight, body composition, and energy intake changes in breastfeeding mothers.

    PubMed

    AbuSabha, R; Greene, G

    1998-06-01

    Body weight, body composition, and energy intake changes are described for 13 breastfeeding mothers followed for 18-24 months after delivery. Body weight was assessed at 1-6, 9, 12, 18, 24 months postpartum and 1 month after infant weaning, and energy intake was assessed at 2-6, 9, 12, 18, 24 months postpartum and 1 month after infant weaning. Compared to prepregnancy weight, participants were an average of 4.0 +/- 6.6 kg heavier 18 months postpartum (p < 0.05). The mean rate of weight loss from 1 month postpartum until termination of lactation was 0.32 +/- 0.27 kg/month. Eight of the 12 women gained weight after weaning their infant. Percent body fat assessed by underwater weighing declined from 34.6 +/- 2.8% at 1 month postpartum to 31.4 +/- 4.8% at 1 month after infant weaning (p < 0.05). Further research is needed to study the factors which affect weight loss postpartum, and how weight gain after weaning can be prevented.

  5. Improving gross count gamma-ray logging in uranium mining with the NGRS probe

    NASA Astrophysics Data System (ADS)

    Carasco, C.; Pérot, B.; Ma, J.-L.; Toubon, H.; Dubille-Auchère, A.

    2018-01-01

    AREVA Mines and the Nuclear Measurement Laboratory of CEA Cadarache are collaborating to improve the sensitivity and precision of uranium concentration measurement by means of gamma ray logging. The determination of uranium concentration in boreholes is performed with the Natural Gamma Ray Sonde (NGRS) based on a NaI(Tl) scintillation detector. The total gamma count rate is converted into uranium concentration using a calibration coefficient measured in concrete blocks with known uranium concentration in the AREVA Mines calibration facility located in Bessines, France. Until now, to take into account gamma attenuation in a variety of boreholes diameters, tubing materials, diameters and thicknesses, filling fluid densities and compositions, a semi-empirical formula was used to correct the calibration coefficient measured in Bessines facility. In this work, we propose to use Monte Carlo simulations to improve gamma attenuation corrections. To this purpose, the NGRS probe and the calibration measurements in the standard concrete blocks have been modeled with MCNP computer code. The calibration coefficient determined by simulation, 5.3 s-1.ppmU-1 ± 10%, is in good agreement with the one measured in Bessines, 5.2 s-1.ppmU-1. Based on the validated MCNP model, several parametric studies have been performed. For instance, the rock density and chemical composition proved to have a limited impact on the calibration coefficient. However, gamma self-absorption in uranium leads to a nonlinear relationship between count rate and uranium concentration beyond approximately 1% of uranium weight fraction, the underestimation of the uranium content reaching more than a factor 2.5 for a 50 % uranium weight fraction. Next steps will concern parametric studies with different tubing materials, diameters and thicknesses, as well as different borehole filling fluids representative of real measurement conditions.

  6. Process for producing enriched uranium having a .sup.235 U content of at least 4 wt. % via combination of a gaseous diffusion process and an atomic vapor laser isotope separation process to eliminate uranium hexafluoride tails storage

    DOEpatents

    Horton, James A.; Hayden, Jr., Howard W.

    1995-01-01

    An uranium enrichment process capable of producing an enriched uranium, having a .sup.235 U content greater than about 4 wt. %, is disclosed which will consume less energy and produce metallic uranium tails having a lower .sup.235 U content than the tails normally produced in a gaseous diffusion separation process and, therefore, eliminate UF.sub.6 tails storage and sharply reduce fluorine use. The uranium enrichment process comprises feeding metallic uranium into an atomic vapor laser isotope separation process to produce an enriched metallic uranium isotopic mixture having a .sup.235 U content of at least about 2 wt. % and a metallic uranium residue containing from about 0.1 wt. % to about 0.2 wt. % .sup.235 U; fluorinating this enriched metallic uranium isotopic mixture to form UF.sub.6 ; processing the resultant isotopic mixture of UF.sub.6 in a gaseous diffusion process to produce a final enriched uranium product having a .sup.235 U content of at least 4 wt. %, and up to 93.5 wt. % or higher, of the total uranium content of the product, and a low .sup.235 U content UF.sub.6 having a .sup.235 U content of about 0.71 wt. % of the total uranium content of the low .sup.235 U content UF.sub.6 ; and converting this low .sup.235 U content UF.sub.6 to metallic uranium for recycle to the atomic vapor laser isotope separation process.

  7. Process for producing enriched uranium having a {sup 235}U content of at least 4 wt. % via combination of a gaseous diffusion process and an atomic vapor laser isotope separation process to eliminate uranium hexafluoride tails storage

    DOEpatents

    Horton, J.A.; Hayden, H.W. Jr.

    1995-05-30

    An uranium enrichment process capable of producing an enriched uranium, having a {sup 235}U content greater than about 4 wt. %, is disclosed which will consume less energy and produce metallic uranium tails having a lower {sup 235}U content than the tails normally produced in a gaseous diffusion separation process and, therefore, eliminate UF{sub 6} tails storage and sharply reduce fluorine use. The uranium enrichment process comprises feeding metallic uranium into an atomic vapor laser isotope separation process to produce an enriched metallic uranium isotopic mixture having a {sup 235} U content of at least about 2 wt. % and a metallic uranium residue containing from about 0.1 wt. % to about 0.2 wt. % {sup 235} U; fluorinating this enriched metallic uranium isotopic mixture to form UF{sub 6}; processing the resultant isotopic mixture of UF{sub 6} in a gaseous diffusion process to produce a final enriched uranium product having a {sup 235}U content of at least 4 wt. %, and up to 93.5 wt. % or higher, of the total uranium content of the product, and a low {sup 235}U content UF{sub 6} having a {sup 235}U content of about 0.71 wt. % of the total uranium content of the low {sup 235}U content UF{sub 6}; and converting this low {sup 235}U content UF{sub 6} to metallic uranium for recycle to the atomic vapor laser isotope separation process. 4 figs.

  8. Stabilization of polyaniline solutions through additives

    DOEpatents

    Wrobleski, D.A.; Benicewicz, B.C.

    1996-12-10

    A stabilized non-conductive polyaniline solution comprising from about 1 to about 10 percent by weight polyaniline or a polyaniline derivative, from about 90 to about 99 percent by weight N-methylpyrrolidone, and from about 0.5 percent by weight to about 15 percent by weight of a solution stabilizing additive selected from the group consisting of hindered amine light stabilizers, polymeric amines, and dialkylamines, percent by weight of additive based on the total weight of polyaniline or polyaniline derivative is provided together with a method for stabilizing a polyaniline solution. 4 figs.

  9. Stabilization of polyaniline solutions through additives

    DOEpatents

    Wrobleski, Debra A.; Benicewicz, Brian C.

    1996-01-01

    A stabilized non-conductive polyaniline solution comprising from about 1 to bout 10 percent by weight polyaniline or a polyaniline derivative, from about 90 to about 99 percent by weight N-methylpyrrolidone, and from about 0.5 percent by weight to about 15 percent by weight of a solution stabilizing additive selected from the group consisting of hindered amine light stabilizers, polymeric amines, and dialkylamines, percent by weight of additive based on the total weight of polyaniline or polyaniline derivative is provided together with a method for stabilizing a polyaniline solution.

  10. Body composition and energetic efficiency in two lines of mice selected for rapid growth rate and their F1 crosses.

    PubMed

    Eisen, E J; Bakker, H; Nagai, J

    1977-01-01

    Correlated responses to selection for increased growth rate were compared in two mouse populations (M16 and H6) of distinct genetic origin. Traits studied were body composition, feed intake, constituent gains and energetic efficiency. When compared with their respective controls (ICR and C2) at 6 and 9 weeks of age, body weight increased more in M16 (57%and 69 % of the control mean) than in H6 (40 % and 34%). The M16 showed correlated responses in fat percent of 2.6% (P <.05), 8.4% (P <.01) and 11.2% (P <.01) at 3, 6 and 9 weeks, respectively, whereas corresponding values in H6 were -2.4% (P <.05), 3.3% (P <.05) and 2.09 % (P >.05). The correlated responses in fat percent were 2.7 and 4.7 times higher in M16 than H6 at 6 and 9 weeks. The regression of ln fat weight on ln empty body weight was larger in M16 (P <.05) compared to ICR and larger (P <.01) in H6 compared to C2. Both M16 and H8 exhibited positive correlated responses from 3 to 6 weeks of age in feed intake and gain and efficiency in fat, protein, calories and ash; fat and caloric gain and efficiency exhibited higher correlated responses in M16 than H6. During the 6- to 9-week interval, the M16 population continued to evince positive correlated responses in gains and efficiencies of fat, protein and calories, whereas H6 did not. Several possible explanations are presented to account for the differences in correlated responses between the selected populations. Partitioning of correlated response differences between M16 and H6 into average direct and average maternal genetic effects indicated that average direct genetic effects, favoring M16, were responsible for the major difference between the selected populations. Direct heterosis in F1 crosses of the selected populations were generally not significant, although there was a tendency for fat percent and fat weight to show heterosis.

  11. Portable field kit for determining uranium in water

    USGS Publications Warehouse

    McHugh, John B.

    1979-01-01

    The pressing need for on-site field analyses of the uranium content of surface and ground waters has promoted the development of a simple, light-weight, relatively cheap, portable kit to make such determinations in the field. Forty to sixty water samples per day can be analyzed for uranium to less than 0.2 parts per billion. The kit was tested in the field with excellent results.

  12. Preliminary report on the White Canyon area, San Juan county, Utah

    USGS Publications Warehouse

    Benson, William E.; Trites, Albert F.; Beroni, Ernest P.; Feeger, John A.

    1952-01-01

    The White Canyon area, in the central part of San Juan County, Utah, consists of approximately two 15-minute quadrangles. Approximately 75 square miles have been mapped by the Geological Survey on a scale of 1 inch equals 1 mile, using a combined aerial photography-plane table method. Structure contours were drawn on top of the Organ Rock member of the Cutler formation. Parts of the Gonway and North Point claims, 1/4 mile east of the Happy Jack mine, were mapped in detail. The principal objectives of the investigations were: (1) to establish ore guides; (2) to select areas favorable for exploration; and (3) to map the general geology and to determine the regional relationships of the uranium deposits. The White Canyon area is comprised of sedimentary rocks of Carboniferous to Jurassic age, more than 2,000 feet thick, having a regional dip of 1° to 2° SW. The nearest igneous rocks are in the Henry Mountains about 7 miles west of the northern part of the area; The Shinarump conglomerate of the late Triassic age, the principal ore horizon in the White Canyon area, consists of lenticular beds of sandstone, conglomeratic sandstone, conglomerate, clay, and siltstone. The Shinarump conglomerate, absent in places, is as much as 75 feet thick. The sandstones locally contain molds of logs and fragments of altered volcanic ash. Some of the logs have been replaced by copper and uranium minerals and iron oxides. The clay and siltstone underlie and are interbedded with the sandstone, and are most common in channels that cut into the underlying Moenkopi formation. The Shinarump conglomerate contains reworked Moenkopi siltstone fragments, clay balls, carbonized wood, and pebbles of quarts, quartzite, and chert. Jointing is prominent in the Western part of the mapped area. The three most prominent joint trends are due east, N. 65°-75° W., and N. 65°-75° E. All joints have vertical dips. The red beds are bleached along some joints, especially those that trend N. 65°-75° W. All uranium ore produced has been from the lower part of the Shinarump conglomerate, where it commonly occurs with copper as disseminations and fracture coatings in sandstone. Uranium and copper minerals also occur in low-grade disseminated deposits in the lower Chinle and in the Moenkopi formation and in veins cutting these formations. Although some uranium deposits occur in Chinarump channels and scours, copper and uranium minerals along fractures suggest that channel control may be secondary. Logs and clay balls apparently have exerted some chemical influences for deposition. The uranium occurs as the oxide in some deposits, and as secondary hydrous sulfates, phosphates, oxides, and silicates in these and several other deposits. Charcoal, iron and manganese oxides, and veinlets of hydrocarbon are abnormally radioactive in most of the deposits. Base-metal sulfides are commonly found inside the oxidized zone. Secondary copper minerals include the hydrous sulfates and carbonate. Gangue minerals include quarts, clay minerals, and manganese oxides, dickite (?), calcite, gypsum, pyrite, and chalcedony (?). Principal wall-rock alteration appears to have been silicification, clay alteration, and bleaching. Most of the shipped ore has contained more than 0.3 percent uranium. The ore also contains copper, commonly in grades lower than 1.0 percent. Criteria believed to be most useful for prospecting for concealed uranium deposits are (1) visible uranium minerals; (2) sulfide minerals; (3) secondary copper minerals; (4) dickite (?); (5) hydrocarbons; and (6) bleaching and alteration of the Moenkopi formation.

  13. Caustic Precipitation of Plutonium and Uranium with Gadolinium as a Neutron Poison

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    ANN, VISSER

    2005-04-14

    The caustic precipitation of plutonium (Pu) and uranium (U) from Pu and U containing waste solutions has been investigated to determine whether gadolinium (Gd) could be used as a neutron poison for precipitation with greater than a fissile mass containing both Pu and enriched U. Precipitation experiments were performed using both actual samples and simulant solutions with a range of 2.6-5.16 g/L U and 0-4.3 to 1 U to Pu. Analyses were performed on solutions at intermediate pH to determine the partitioning of elements for accident scenarios. When both Pu and U were present in the solution, precipitation began atmore » pH 4.5 and by pH 7, 99 percent of Pu and U had precipitated. When complete neutralization was achieved at pH greater than 14 with 1.2 M excess OH-, greater than 99 percent of Pu, U, and Gd had precipitated. At pH greater than 14, the particles sizes were larger and the distribution was a single mode. The ratio of hydrogen to fissile atoms in the precipitate was determined after both settling and centrifuging and indicates that sufficient water was associated with the precipitates to provide the needed neutron moderation for Gd to prevent a criticality in solutions containing up to 4.3 to 1 U to Pu and up to 5.16 g/L U.« less

  14. JPRS Report Science and Technology, Japan: Atomic Energy Society 1989 Annual Meeting.

    DTIC Science & Technology

    1989-10-13

    Control Rod Hole in VHTRC-1 Core [F, Akino, T, Yamane, et al.] ,,, 5 Measurement of MEU [Medium Enriched Uranium ] Fuel Element Characteristics in...K. Yoshida, K. Kobayashi, I. Kimura , C. Yamanaka, and S. Nakai, Laser Laboratory,, Osaka University. Nuclear Reactor Laboratory, Kyoto University...1 core loaded with 278 fuel rods (4 percent enriched uranium ). The PNS target was placed at the back center of the 1/2 assembly on the fixed side

  15. Corrosion Inhibition in High Temperature Environment

    DTIC Science & Technology

    1993-06-28

    levels of sodium , sulfur, and vanadium. Low quality 12 marine residual fuels, for example, may contain up to 0.2 weight 13 percent ash which contains...appreciable amounts of sodium , up to 5 14 weight percent sulfur and up to 0.06 weight percent or 600 ppm 15 vanadium. Low grades of marine distillate...fuels are allowed up to 16 0.05 weight percent ash which contains appreciable amounts of 17 sodium , up to 2 weight percent sulfur and up to 100 ppm

  16. A fission gas release correlation for uranium nitride fuel pins

    NASA Technical Reports Server (NTRS)

    Weinstein, M. B.; Davison, H. W.

    1973-01-01

    A model was developed to predict fission gas releases from UN fuel pins clad with various materials. The model was correlated with total release data obtained by different experimentors, over a range of fuel temperatures primarily between 1250 and 1660 K, and fuel burnups up to 4.6 percent. In the model, fission gas is transported by diffusion mechanisms to the grain boundaries where the volume grows and eventually interconnects with the outside surface of the fuel. The within grain diffusion coefficients are found from fission gas release rate data obtained using a sweep gas facility.

  17. Calculating Confidence Intervals for Regional Economic Impacts of Recreastion by Bootstrapping Visitor Expenditures

    Treesearch

    Donald B.K. English

    2000-01-01

    In this paper I use bootstrap procedures to develop confidence intervals for estimates of total industrial output generated per thousand tourist visits. Mean expenditures from replicated visitor expenditure data included weights to correct for response bias. Impacts were estimated with IMPLAN. Ninety percent interval endpoints were 6 to 16 percent above or below the...

  18. Uranium in granites from the Southwestern United States: actinide parent-daughter systems, sites and mobilization. First year report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Silver, L T; Williams, I S; Woodhead, J A

    1980-10-01

    Some of the principal findings of the study on the Lawler Peak Granite are: the granite is dated precisely by this work at 1411 +- 3 m.y., confirming its synchroneity with a great regional terrane of granites. Uranium is presently 8-10 times crustal abundance and thorium 2-3 times in this granite. Uranium is found to be enriched in at least eight, possibly ten, primary igneous mineral species over the whole-rock values. Individual mineral species show distinct levels in, and characteristics ranges of, uranium concentration. It appears that in a uraniferous granite such as this, conventional accuracy mineral suites probably cannotmore » account for most of the uranium in the rock, and more rare, high U-concentration phases also are present and are significant uranium hosts. It appears that at least two different geological episodes have contributed to the disturbance of the U-Th-Pb isotope systems. Studies of various sites for transient dispersal of uranium, thorium, and radiogenic lead isotopes indicate a non-uniform dispersal of these components. It appears that the bulk rock has lost at least 24 percent of its original uranium endowment, accepting limited or no radiogenic lead or thorium migration from the sample.« less

  19. Evaluation of new geological reference materials for uranium-series measurements: Chinese Geological Standard Glasses (CGSG) and macusanite obsidian.

    PubMed

    Denton, J S; Murrell, M T; Goldstein, S J; Nunn, A J; Amato, R S; Hinrichs, K A

    2013-10-15

    Recent advances in high-resolution, rapid, in situ microanalytical techniques present numerous opportunities for the analytical community, provided accurately characterized reference materials are available. Here, we present multicollector thermal ionization mass spectrometry (MC-TIMS) and multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) uranium and thorium concentration and isotopic data obtained by isotope dilution for a suite of newly available Chinese Geological Standard Glasses (CGSG) designed for microanalysis. These glasses exhibit a range of compositions including basalt, syenite, andesite, and a soil. Uranium concentrations for these glasses range from ∼2 to 14 μg g(-1), Th/U weight ratios range from ∼4 to 6, (234)U/(238)U activity ratios range from 0.93 to 1.02, and (230)Th/(238)U activity ratios range from 0.98 to 1.12. Uranium and thorium concentration and isotopic data are also presented for a rhyolitic obsidian from Macusani, SE Peru (macusanite). This glass can also be used as a rhyolitic reference material, has a very low Th/U weight ratio (around 0.077), and is approximately in (238)U-(234)U-(230)Th secular equilibrium. The U-Th concentration data agree with but are significantly more precise than those previously measured. U-Th concentration and isotopic data agree within estimated errors for the two measurement techniques, providing validation of the two methods. The large (238)U-(234)U-(230)Th disequilibria for some of the glasses, along with the wide range in their chemical compositions and Th/U ratios should provide useful reference points for the U-series analytical community.

  20. Depleted and enriched uranium exposure quantified in former factory workers and local residents of NL Industries, Colonie, NY USA

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Arnason, John G.

    Background: Between 1958 and 1982, NL Industries manufactured components of enriched (EU) and depleted uranium (DU) at a factory in Colonie NY, USA. More than 5 metric tons of DU was deposited as microscopic DU oxide particles on the plant site and surrounding residential community. A prior study involving a small number of individuals (n=23) indicated some residents were exposed to DU and former workers to both DU and EU, most probably through inhalation of aerosol particles. Objectives: Our aim was to measure total uranium [U] and the uranium isotope ratios: {sup 234}U/{sup 238}U; {sup 235}U/{sup 238}U; and {sup 236}U/{supmore » 238}U, in the urine of a cohort of former workers and nearby residents of the NLI factory, to characterize individual exposure to natural uranium (NU), DU, and EU more than 3 decades after production ceased. Methods: We conducted a biomonitoring study in a larger cohort of 32 former workers and 99 residents, who may have been exposed during its period of operation, by measuring Total U, NU, DU, and EU in urine using Sector Field Inductively Coupled Plasma - Mass Spectrometry (SF-ICP-MS). Results: Among workers, 84% were exposed to DU, 9% to EU and DU, and 6% to natural uranium (NU) only. For those exposed to DU, urinary isotopic and [U] compositions result from binary mixing of NU and the DU plant feedstock. Among residents, 8% show evidence of DU exposure, whereas none shows evidence of EU exposure. For residents, the [U] geometric mean is significantly below the value reported for NHANES. There is no significant difference in [U] between exposed and unexposed residents, suggesting that [U] alone is not a reliable indicator of exposure to DU in this group. Conclusions: Ninety four percent of workers tested showed evidence of exposure to DU, EU or both, and were still excreting DU and EU decades after leaving the workforce. The study demonstrates the advantage of measuring multiple isotopic ratios (e.g., {sup 236}U/{sup 238}U and {sup 235}U/{sup 238}U) over a single ratio ({sup 235}U/{sup 238}U) in determining sources of uranium exposure. - Highlights: • Biomonitoring study of residents and former workers exposed to DU in Colonie NY. • Urine (99 residents+32 former workers) analyzed for depleted uranium (DU). • DU detected in 84% of workers and 8% of residents >30 years after plant closed. • Enriched uranium detected in 6% of former workers based on isotope ratios.« less

  1. Screening level model for ecological risk assessment at EF-Site Los Alamos National Laboratory, New Mexico. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alldredge, A.W.; Kirchner, T.B.; McLendon, T.

    1995-12-01

    In response to a paucity of data on the chemical toxicity of uranium to plants, a factorial experiment employing five uranium concentrations (0, 50, 500, 5000, 25000 ppm) and three moisture regimes (low, medium, high) was performed using three native grasses. Buchloe dactyloides (buffalograss-mid/late seral), Schizachyrium scoparium (little bluestem-late seral), and Aristida longiseta (purple threeawn-early/mid seral) were grown in monocultures and every mixture of two species under all combinations of uranium and moisture levels. This design allows for the analysis of uranium effects, as well as possible compound effects due to moisture stress. Several measures of plant health and viabilitymore » were made, including: percent emergence, survivability of seedlings and mature plants, root and shoot biomass, and the number and mass of inflorescences. No significant differences between uranium levels were observed in terms of emergence and seedling survival. Effects are evident for plant biomass, fecundity, and long-term survivability.« less

  2. Inhalation of uranium nanoparticles: respiratory tract deposition and translocation to secondary target organs in rats.

    PubMed

    Petitot, Fabrice; Lestaevel, Philippe; Tourlonias, Elie; Mazzucco, Charline; Jacquinot, Sébastien; Dhieux, Bernadette; Delissen, Olivia; Tournier, Benjamin B; Gensdarmes, François; Beaunier, Patricia; Dublineau, Isabelle

    2013-03-13

    Uranium nanoparticles (<100 nm) can be released into the atmosphere during industrial stages of the nuclear fuel cycle and during remediation and decommissioning of nuclear facilities. Explosions and fires in nuclear reactors and the use of ammunition containing depleted uranium can also produce such aerosols. The risk of accidental inhalation of uranium nanoparticles by nuclear workers, military personnel or civilian populations must therefore be taken into account. In order to address this issue, the absorption rate of inhaled uranium nanoparticles needs to be characterised experimentally. For this purpose, rats were exposed to an aerosol containing 10⁷ particles of uranium per cm³ (CMD=38 nm) for 1h in a nose-only inhalation exposure system. Uranium concentrations deposited in the respiratory tract, blood, brain, skeleton and kidneys were determined by ICP-MS. Twenty-seven percent of the inhaled mass of uranium nanoparticles was deposited in the respiratory tract. One-fifth of UO₂ nanoparticles were rapidly cleared from lung (T(½)=2.4 h) and translocated to extrathoracic organs. However, the majority of the particles were cleared slowly (T(½)=141.5 d). Future long-term experimental studies concerning uranium nanoparticles should focus on the potential lung toxicity of the large fraction of particles cleared slowly from the respiratory tract after inhalation exposure. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  3. Argonne explains nuclear recycling in 4 minutes

    ScienceCinema

    Willit, Jim; Williamson, Mark; Haynes, Amber

    2018-05-30

    Currently, when using nuclear energy only about five percent of the uranium used in a fuel rod gets fissioned for energy; after that, the rods are taken out of the reactor and put into permanent storage. There is a way, however, to use almost all of the uranium in a fuel rod. Recycling used nuclear fuel could produce hundreds of years of energy from just the uranium we've already mined, all of it carbon-free. Problems with older technology put a halt to recycling used nuclear fuel in the United States, but new techniques developed by scientists at Argonne National Laboratory address many of those issues. For more information, visit http://www.anl.gov/energy/nuclear-energy.

  4. Preoperative Lifestyle Intervention in Bariatric Surgery: A Randomized Clinical Trial

    PubMed Central

    Kalarchian, Melissa A.; Marcus, Marsha D.; Courcoulas, Anita P.; Cheng, Yu; Levine, Michele D.

    2015-01-01

    Background Studies of the impact of pre-surgery weight loss and lifestyle preparation on outcomes following bariatric surgery are needed. Objective To evaluate whether a pre-surgery behavioral lifestyle intervention improves weight loss through 24-months post-surgery. Setting Bariatric Center of Excellence at a large, urban medical center. Methods Candidates for bariatric surgery were randomized to a 6-month behavioral lifestyle intervention or to 6 months of usual pre-surgical care. The lifestyle intervention consisted of 8 weekly face-to-face sessions followed by 16 weeks of face-to-face and telephone sessions prior to surgery; the intervention also included 3 monthly telephone contacts after surgery. Assessments were conducted at 6-, 12- and 24-months post-surgery. Results Participants who underwent surgery (n = 143) were 90.2% female and 86.7% White. Average age was 44.9 years, and average BMI was 47.5 kg/m2 at study enrollment. At follow-up, 131 (91.6%), 126 (88.1%), 117 (81.8%) patients participated in the 6-, 12- and 24 month assessments, respectively. Percent weight loss from study enrollment to 6- and 12-months post-surgery was comparable for both groups, but at 24-months post-surgery, the lifestyle group had significantly smaller percent weight loss than the usual care group (26.5% vs. 29.5%, respectively, p = 0.02). Conclusions Pre-surgery lifestyle intervention did not improve weight loss at 24 months post-surgery. Findings raise questions about the utility and timing of adjunctive lifestyle interventions for bariatric surgery patients. PMID:26410538

  5. Uranium deposits in the Eureka Gulch area, Central City district, Gilpin County, Colorado

    USGS Publications Warehouse

    Sims, P.K.; Osterwald, F.W.; Tooker, E.W.

    1954-01-01

    The Eureka Gulch area of the Central City district, Gilpin County, Colo., was mined for ores of gold, silver, copper, lead, and zinc; but there has been little mining activity in the area since World War I. Between 1951 and 1953 nine radioactive mine dumps were discovered in the area by the U.S. Geological Survey and by prospectors. the importance of the discoveries has not been determined as all but one of the mines are inaccessible, but the distribution, quantity, and grade of the radioactive materials found on the mine dumps indicate that the area is worth of additional exploration as a possible source of uranium ore. The uranium ans other metals are in and near steeply dipping mesothermal veins of Laramide age intrusive rocks. Pitchblende is present in at least four veins, and metatorbernite, associated at places with kosolite, is found along two veins for a linear distance of about 700 feet. The pitchblends and metatorbernite appear to be mutually exclusive and seem to occur in different veins. Colloform grains of pitchblende were deposited in the vein essentially contemporaneously with pyrite. The pitchblende is earlier in the sequence of deposition than galena and sphalerite. The metatorbernite replaces altered biotite-quartz-plagioclase gneiss and altered amphibolite, and to a lesser extent forms coatings on fractures in these rocks adjacent to the veins; the kasolite fills vugs in highly altered material and in altered wall rocks. Much of the pitchblende found on the dumps has been partly leached subsequent to mining and is out of equilibrium. Selected samples of metatorbernite-bearing rock from one mine dump contain as much as 6.11 percent uranium. The pitchblende is a primary vein mineral deposited from uranium-bearing hydrothermal solutions. The metatorbernite probably formed by oxidation, solution, and transportation of uranium from primary pitchblende, but it may be a primary mineral deposited directly from fluids of different composition from these that deposited pitchblende.

  6. North Korea’s Military Threat: Pyongyang’s Conventional Forces, Weapons of Mass Destruction, and Ballistic Missiles

    DTIC Science & Technology

    2007-04-01

    that some 40 percent of the populace serve in some military or paramilitary formation . In short, the DPRK is undoubtedly the “most militarized...reportedly supplied North Korea with “ uranium enrichment equipment and perhaps even warhead designs.”301 In the first decade of the 21st century...Taechon (construction frozen under the Agreed Framework), as well as uranium ore processing at Pyongsan and Pakchon.305 However, “it is impossible

  7. Performance of transonic fan stage with weight flow per unit annulus area of 178 kilograms per second per square meter (6.5(lb/sec)/(sq ft))

    NASA Technical Reports Server (NTRS)

    Moore, R. D.; Urasek, D. C.; Kovich, G.

    1973-01-01

    The overall and blade-element performances are presented over the stable flow operating range from 50 to 100 percent of design speed. Stage peak efficiency of 0.834 was obtained at a weight flow of 26.4 kg/sec (58.3 lb/sec) and a pressure ratio of 1.581. The stall margin for the stage was 7.5 percent based on weight flow and pressure ratio at stall and peak efficiency conditions. The rotor minimum losses were approximately equal to design except in the blade vibration damper region. Stator minimum losses were less than design except in the tip and damper regions.

  8. Fission-gas-release rates from irradiated uranium nitride specimens

    NASA Technical Reports Server (NTRS)

    Weinstein, M. B.; Kirchgessner, T. A.; Tambling, T. N.

    1973-01-01

    Fission-gas-release rates from two 93 percent dense UN specimens were measured using a sweep gas facility. Specimen burnup rates averaged .0045 and .0032 percent/hr, and the specimen temperatures ranged from 425 to 1323 K and from 552 to 1502 K, respectively. Burnups up to 7.8 percent were achieved. Fission-gas-release rates first decreased then increased with burnup. Extensive interconnected intergranular porosity formed in the specimen operated at over 1500 K. Release rate variation with both burnup and temperature agreed with previous irradiation test results.

  9. 31 CFR 540.317 - Uranium feed; natural uranium feed.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Uranium feed; natural uranium feed...) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.317 Uranium feed; natural uranium feed. The term uranium feed or natural uranium feed means natural uranium in the form of UF6 suitable for uranium...

  10. 31 CFR 540.317 - Uranium feed; natural uranium feed.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Uranium feed; natural uranium feed...) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.317 Uranium feed; natural uranium feed. The term uranium feed or natural uranium feed means natural uranium in the form of UF6 suitable for uranium...

  11. 21 CFR 172.834 - Ethoxylated mono- and diglycerides.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... emulsifier in whipped vegetable oil toppings and topping mixes Not to exceed 0.45 percent by weight of the finished whipped vegetable oil toppings. 4. As an emulsifier in icings and icing mixes Not to exceed 0.5... by weight of the finished frozen desserts. 6. As an emulsifier in edible vegetable fat-water...

  12. 75 FR 6631 - Stainless Steel Sheet and Strip in Coils from Japan: Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-10

    ... and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less..., phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less than 0.002... weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less...

  13. Eccentric exercise training as a countermeasure to non-weight-bearing soleus muscle atrophy

    NASA Technical Reports Server (NTRS)

    Kirby, Christopher R.; Ryan, Mirelle J.; Booth, Frank W.

    1992-01-01

    This investigation tested whether eccentric resistance training could prevent soleus muscle atrophy during non-weight bearing. Adult female rats were randomly assigned to either weight bearing +/- intramuscular electrodes or non-weight bearing +/- intramuscular electrodes groups. Electrically stimulated maximal eccentric contractions were performed on anesthetized animals at 48-h intervals during the 10-day experiment. Non-weight bearing significantly reduced soleus muscle wet weight (28-31 percent) and noncollagenous protein content (30-31 percent) compared with controls. Eccentric exercise training during non-weight bearing attenuated but did not prevent the loss of soleus muscle wet weight and noncollagenous protein by 77 and 44 percent, respectively. The potential of eccentric exercise training as an effective and highly efficient counter-measure to non-weight-bearing atrophy is demonstrated in the 44 percent attenuation of soleus muscle noncollagenous protein loss by eccentric exercise during only 0.035 percent of the total non-weight-bearing time period.

  14. Influence of 7 days of hindlimb suspension and intermittent weight support on rat muscle mechanical properties

    NASA Technical Reports Server (NTRS)

    Pierotti, David J.; Roy, Roland R.; Flores, Vinicio; Edgerton, Reggie

    1990-01-01

    The effect of intermittent periods of weight support on a decrease in mass of the soleus (Sol) and medial gastrocnemius (MG) muscles atrophied by hindlimb suspension (HS) was investigated in rats subjected to continuous HS for seven days or an HS plus intermittent (10 min every 6 hrs of slow walking on a treadmill) weight support (HS-WS). After 7 d HS, the Sol weight relative to body weight was 21 and 9 percent lower in Hs and HS-WS, respectively, than in control rats. Maximum tetanic tension/muscle mass ratio was significantly lower in HS than in controls; the HS-WS rats had values similar to controls, whereas the maximum tetanic tension/muscle weight was significantly elevated in HS-WS compared to controls. Contraction times were 25 percent faster in the Sol and unchanged in the MG of HS rats, indicating that a low-force short-duration exercise regime results in a significant functional recovery in the 'slow' Sol, whereas the 'fast' MG is less affected.

  15. Mountain wetlands: efficient uranium filters - potential impacts

    USGS Publications Warehouse

    Owen, D.E.; Otton, J.K.

    1995-01-01

    Sediments in 67 of 145 Colorado wetlands sampled by the US Geological Survey contain moderate (20 ppm) or greater concentrations of uranium (some as high as 3000 ppm) based on dry weight. The proposed maximum contaminant level (MCL) for uranium in drinking water is 20 ??g/l or 20 ppb. By comparison, sediments in many of these wetlands contain 3 to 5 orders of magnitude more uranium than the proposed MCL. Wetlands near the workings of old mines may be trapping any number of additional metals/elements including Cu, Pb, Zn, As and Ag. Anthropogenic disturbances and natural changes may release uranium and other loosely bound metals presently contained in wetland sediments. -from Authors

  16. Experiment K-6-16. Morphological examination of rat testes. The effect of Cosmos 1887 flight on spermatogonial population and testosterone level in rat testes

    NASA Technical Reports Server (NTRS)

    Philpott, D. E.; Kato, K.; Stevenson, J.; Vasques, M.; Sapp, W.; Williams, C.; Popova, I. A.; Serova, L. V.

    1990-01-01

    Testes from rats flown on Cosmos 1887 for twelve and a half days were compared to basal control, synchronous control and vivarium maintained rats. When the mean weights of flight testes, normalized for weight/100 gms, were compared to the vivarium controls they were 6.7 percent lighter. Although the flight testes were lighter than the synchronous, the difference is not significant. Counts of spermatogonial cells from 5 animals in each group revealed a 4 percent decrease in flight compared to vivarium controls. In both cases the t-Test significance was less than 0.02. The serum testosterone levels of all animals (flight, synchronous and vivarium) were significantly below the basal controls.

  17. MELTING AND PURIFICATION OF URANIUM

    DOEpatents

    Spedding, F.H.; Gray, C.F.

    1958-09-16

    A process is described for treating uranium ingots having inner metal portions and an outer oxide skin. The method consists in partially supporting such an ingot on the surface of a grid or pierced plate. A sufficient weight of uranium is provided so that when the mass becomes molten, the oxide skin bursts at the unsupported portions of its bottom surface, allowing molten urantum to flow through the burst skin and into a container provided below.

  18. METHOD OF ELECTROPLATING ON URANIUM

    DOEpatents

    Rebol, E.W.; Wehrmann, R.F.

    1959-04-28

    This patent relates to a preparation of metallic uranium surfaces for receiving coatings, particularly in order to secure adherent electroplated coatings upon uranium metal. In accordance with the invention the uranium surface is pretreated by degreasing in trichloroethylene, followed by immersion in 25 to 50% nitric acid for several minutes, and then rinsed with running water, prior to pickling in trichloroacetic acid. The last treatment is best accomplished by making the uranium the anode in an aqueous solution of 50 per cent by weight trichloroacetic acid until work-distorted crystals or oxide present on the metal surface have been removed and the basic crystalline structure of the base metal has been exposed. Following these initial steps the metallic uranium is rinsed in dilute nitric acid and then electroplated with nickel. Adnerent firmly-bonded coatings of nickel are obtained.

  19. Sputter erosion and deposition in the discharge chamber of a small mercury ion thruster

    NASA Technical Reports Server (NTRS)

    Power, J. L.

    1973-01-01

    A 5 cm diameter mercury ion thruster similar to one tested for 9715 hours was operated approximately 400 hrs each at discharge voltages of 36.6, 39.6, and 42.6 V, with corresponding discharge propellant utilizations of 58, 68, and 70 percent. The observed sputter erosion rates of the internal thruster parts and the anode weight gain rate all rose rapidly with discharge voltage and were roughly in the ratio of 1:3:5 for the three voltages. The combined weight loss of the internal thruster parts nearly balanced the anode weight gain. Hg(+2) ion apparently caused most of the observed erosion.

  20. 12 CFR 324.152 - Simple risk weight approach (SRWA).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... (that is, between zero and -1), then E equals the absolute value of RVC. If RVC is negative and less... the lowest applicable risk weight in this section. (1) Zero percent risk weight equity exposures. An....131(d)(2) is assigned a zero percent risk weight. (2) 20 percent risk weight equity exposures. An...

  1. Microbial Cells as Biosorbents for Heavy Metals: Accumulation of Uranium by Saccharomyces cerevisiae and Pseudomonas aeruginosa

    PubMed Central

    Strandberg, Gerald W.; Shumate, Starling E.; Parrott, John R.

    1981-01-01

    Uranium accumulated extracellularly on the surfaces of Saccharomyces cerevisiae cells. The rate and extent of accumulation were subject to environmental parameters, such as pH, temperature, and interference by certain anions and cations. Uranium accumulation by Pseudomonas aeruginosa occurred intracellularly and was extremely rapid (<10 s), and no response to environmental parameters could be detected. Metabolism was not required for metal uptake by either organism. Cell-bound uranium reached a concentration of 10 to 15% of the dry cell weight, but only 32% of the S. cerevisiae cells and 44% of the P. aeruginosa cells within a given population possessed visible uranium deposits when examined by electron microscopy. Rates of uranium uptake by S. cerevisiae were increased by chemical pretreatment of the cells. Uranium could be removed chemically from S. cerevisiae cells, and the cells could then be reused as a biosorbent. Images PMID:16345691

  2. Depleted and enriched uranium exposure quantified in former factory workers and local residents of NL Industries, Colonie, NY USA.

    PubMed

    Arnason, John G; Pellegri, Christine N; Moore, June L; Lewis-Michl, Elizabeth L; Parsons, Patrick J

    2016-10-01

    Between 1958 and 1982, NL Industries manufactured components of enriched (EU) and depleted uranium (DU) at a factory in Colonie NY, USA. More than 5 metric tons of DU was deposited as microscopic DU oxide particles on the plant site and surrounding residential community. A prior study involving a small number of individuals (n=23) indicated some residents were exposed to DU and former workers to both DU and EU, most probably through inhalation of aerosol particles. Our aim was to measure total uranium [U] and the uranium isotope ratios: (234)U/(238)U; (235)U/(238)U; and (236)U/(238)U, in the urine of a cohort of former workers and nearby residents of the NLI factory, to characterize individual exposure to natural uranium (NU), DU, and EU more than 3 decades after production ceased. We conducted a biomonitoring study in a larger cohort of 32 former workers and 99 residents, who may have been exposed during its period of operation, by measuring Total U, NU, DU, and EU in urine using Sector Field Inductively Coupled Plasma - Mass Spectrometry (SF-ICP-MS). Among workers, 84% were exposed to DU, 9% to EU and DU, and 6% to natural uranium (NU) only. For those exposed to DU, urinary isotopic and [U] compositions result from binary mixing of NU and the DU plant feedstock. Among residents, 8% show evidence of DU exposure, whereas none shows evidence of EU exposure. For residents, the [U] geometric mean is significantly below the value reported for NHANES. There is no significant difference in [U] between exposed and unexposed residents, suggesting that [U] alone is not a reliable indicator of exposure to DU in this group. Ninety four percent of workers tested showed evidence of exposure to DU, EU or both, and were still excreting DU and EU decades after leaving the workforce. The study demonstrates the advantage of measuring multiple isotopic ratios (e.g., (236)U/(238)U and (235)U/(238)U) over a single ratio ((235)U/(238)U) in determining sources of uranium exposure. Copyright © 2016 Elsevier Inc. All rights reserved.

  3. Ineffectiveness of commercial weight-loss programs for achieving modest but meaningful weight loss: Systematic review and meta-analysis.

    PubMed

    McEvedy, Samantha M; Sullivan-Mort, Gillian; McLean, Siân A; Pascoe, Michaela C; Paxton, Susan J

    2017-10-01

    This study collates existing evidence regarding weight loss among overweight but otherwise healthy adults who use commercial weight-loss programs. Systematic search of 3 databases identified 11 randomized controlled trials and 14 observational studies of commercial meal-replacement, calorie-counting, or pre-packaged meal programs which met inclusion criteria. In meta-analysis using intention-to-treat data, 57 percent of individuals who commenced a commercial weight program lost less than 5 percent of their initial body weight. One in two (49%) studies reported attrition ≥30 percent. A second meta-analysis found that 37 percent of program completers lost less than 5 percent of initial body weight. We conclude that commercial weight-loss programs frequently fail to produce modest but clinically meaningful weight loss with high rates of attrition suggesting that many consumers find dietary changes required by these programs unsustainable.

  4. Uniform deposition of uranium hexafluoride (UF6): Standardized mass deposits and controlled isotopic ratios using a thermal fluorination method

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McNamara, Bruce K.; O’Hara, Matthew J.; Casella, Andrew M.

    2016-07-01

    Abstract: We report a convenient method for the generation of volatile uranium hexafluoride (UF6) from solid uranium oxides and other uranium compounds, followed by uniform deposition of low levels of UF6 onto sampling coupons. Under laminar flow conditions, UF6 is shown to interact with surfaces within the chamber to a highly predictable degree. We demonstrate the preparation of uranium deposits that range between ~0.01 and 470±34 ng∙cm-2. The data suggest the method can be extended to creating depositions at the sub-picogram∙cm-2 level. Additionally, the isotopic composition of the deposits can be customized by selection of the uranium source materials. Wemore » demonstrate a layering technique whereby two uranium solids, each with a different isotopic composition, are employed to form successive layers of UF6 on a surface. The result is an ultra-thin deposit of UF6 that bears an isotopic signature that is a composite of the two uranium sources. The reported deposition method has direct application to the development of unique analytical standards for nuclear safeguards and forensics.« less

  5. Patterns of postnatal weight changes in infants with very low and extremely low birth weights.

    PubMed

    Smith, S L; Kirchhoff, K T; Chan, G M; Squire, S J

    1994-01-01

    To describe (1) short-term postnatal weight loss and gain patterns in infants with very low and extremely low birth weights and (2) the variables that may affect these weight change patterns. Descriptive, retrospective review. University hospital in the intermountain western United States. Sixty-two charts of infants admitted to a university neonatal intensive care unit from July 1990 through November 1992 were reviewed. Infants who weighed 1000 grams or less were categorized as extremely low birth weight (ELBW) and infants weighing 1001 to 1500 grams were categorized as very low birth weight (VLBW). Each group was comprised of 31 infants. Fifty percent of the sample were male, and 50% were female. Eighty-five percent of the sample were Anglo-American, and 15% were non-Anglo-American. Data were collected on a three-part data collection tool and included demographic and treatment variables. A significant difference was found in the maximum percent weight lost between the two groups, with the ELBW group losing a mean of 14.77% of birth weight and the VLBW group losing a mean of 11.35% of birth weight (t = 2.45, p < 0.05). The day the infants reached their nadir weight was significantly different between the two groups. The ELBW group reached their nadir on day of life 7, and the VLBW group reached their nadir on day of life 6 (t = 2.00, p < 0.05). No significant difference was noted in the time to return to birth weight between the two groups, with a mean of 15 days to return to birth weight. Factors associated with postnatal weight changes were intraventricular hemorrhage, use of diuretics and steroids, day of life when nadir weight occurred, and maximum percent of weight lost. Many of the independent variables were significantly interrelated to each other (r = -0.90 to r = 0.91, p < 0.01 to p < 0.001). However, only the variables that correlated with time to return to birth weight were entered into the regression analysis. These variables included number of days diuretics were given before return to birth weight, maximum percent of weight lost, and day of life the infants reached their nadir weight. Number of days diuretics were given before return to birth weight correlated significantly with time to return to birth weight (r = 0.77, F = 26.66, p < 0.0001) although maximum percent of weight lost and day of life the infants reached their nadir weight had a minimal effect. Further research into the effects of diuretic therapy on weight changes in this population of infants may lead to interventions to minimize the negative effects of diuretics on return to birth weight. In addition, the older growth charts may not be applicable to this population of infants. Generation of new growth charts that provide growth curves based on these data could be useful in developing nutritional therapies that would promote growth and possibly decrease the length of hospital stay for these infants.

  6. METAL COMPOSITIONS

    DOEpatents

    Seybolt, A.U.

    1959-02-01

    Alloys of uranium which are strong, hard, and machinable are presented, These alloys of uranium contain bctween 0.1 to 5.0% by weight of at least one noble metal such as rhodium, palladium, and gold. The alloys may be heat treated to obtain a product with iniproved tensile and compression strengths,

  7. 10 CFR 39.2 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... neutron generator tube to produce neutrons for use in well logging applications. Uranium sinker bar means a weight containing depleted uranium used to pull a logging tool toward the bottom of a well. Well... drilled holes for the purpose of oil, gas, mineral, groundwater, or geological exploration. Well logging...

  8. 10 CFR 39.2 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... neutron generator tube to produce neutrons for use in well logging applications. Uranium sinker bar means a weight containing depleted uranium used to pull a logging tool toward the bottom of a well. Well... drilled holes for the purpose of oil, gas, mineral, groundwater, or geological exploration. Well logging...

  9. 10 CFR 39.2 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... neutron generator tube to produce neutrons for use in well logging applications. Uranium sinker bar means a weight containing depleted uranium used to pull a logging tool toward the bottom of a well. Well... drilled holes for the purpose of oil, gas, mineral, groundwater, or geological exploration. Well logging...

  10. 10 CFR 39.2 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... neutron generator tube to produce neutrons for use in well logging applications. Uranium sinker bar means a weight containing depleted uranium used to pull a logging tool toward the bottom of a well. Well... drilled holes for the purpose of oil, gas, mineral, groundwater, or geological exploration. Well logging...

  11. 10 CFR 39.2 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... neutron generator tube to produce neutrons for use in well logging applications. Uranium sinker bar means a weight containing depleted uranium used to pull a logging tool toward the bottom of a well. Well... drilled holes for the purpose of oil, gas, mineral, groundwater, or geological exploration. Well logging...

  12. URANIUM ALLOYS

    DOEpatents

    Seybolt, A.U.

    1958-04-15

    Uranium alloys containing from 0.1 to 10% by weight, but preferably at least 5%, of either zirconium, niobium, or molybdenum exhibit highly desirable nuclear and structural properties which may be improved by heating the alloy to about 900 d C for an extended period of time and then rapidly quenching it.

  13. Increasing low-energy-dense foods and decreasing high-energy-dense foods differently influence weight loss trial outcomes

    PubMed Central

    Vadiveloo, M; Parker, H; Raynor, H

    2018-01-01

    BACKGROUND/OBJECTIVE Although reducing energy density (ED) enhances weight loss, it is unclear whether all dietary strategies that reduce ED are comparable, hindering effective ED guidelines for obesity treatment. This study examined how changes in number of low-energy-dense (LED) (<4.186 kJ/1.0 kcal g−1) and high-energy-dense (HED) (>12.56 kJ/3.0 kcal g−1) foods consumed affected dietary ED and weight loss within an 18-month weight loss trial. METHODS This secondary analysis examined data from participants randomized to an energy-restricted lifestyle intervention or lifestyle intervention plus limited non-nutrient dense, energy-dense food variety (n = 183). Number of daily LED and HED foods consumed was calculated from three, 24-h dietary recalls and anthropometrics were measured at 0, 6 and 18 months. Multivariable-adjusted generalized linear models and repeated-measures mixed linear models examined associations between 6-month changes in number of LED and HED foods and changes in ED, body mass index (BMI), and percent weight loss at 6 and 18 months. RESULTS Among mostly female (58%), White (92%) participants aged 51.9 years following an energy-restricted diet, increasing number of LED foods or decreasing number of HED foods consumed was associated with 6- and 18-month reductions in ED (β = − 0.25 to − 0.38 kJ g−1 (−0.06 to − 0.09 kcal g−1), P<0.001). Only increasing number of LED foods consumed was associated with 6- and 18-month reductions in BMI (β = − 0.16 to − 0.2 kg m−2, P<0.05) and 6-month reductions in percent weight loss (β = − 0.5%, P<0.05). Participants consuming ≤2 HED foods per day and ≥6.6 LED foods per day experienced better weight loss outcomes at 6- and 18-month than participants only consuming ≤2 HED foods per day. CONCLUSION Despite similar reductions in ED from reducing number of HED foods or increasing number of LED foods consumed, only increasing number of LED foods related to weight loss. This provides preliminary evidence that methods used to reduce dietary ED may differentially influence weight loss trajectories. Randomized controlled trials are needed to inform ED recommendations for weight loss. PMID:29406521

  14. Extracting Uranium from Seawater: Promising AI Series Adsorbents

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Das, S.; Oyola, Y.; Mayes, R. T.

    A new series of adsorbents (AI10 through AI17) were successfully developed at ORNL by radiation induced graft polymerization (RIGP) of acrylonitrile (AN) and vinylphosphonic acid (VPA) (at different mole to mole ratios) onto high surface area polyethylene fiber, with high degrees of grafting (DOG) varying from 110 to 300%. The grafted nitrile groups were converted to amidoxime groups by reaction with 5 wt % hydroxylamine at 80 °C for 72 h. The amidoximated adsorbents were then conditioned with 0.44 M KOH at 80 °C followed by screening at ORNL with prescreening brine spiked with 8 ppm uranium. Uranium adsorption capacitiesmore » in prescreening ranged from 171 to 187 g-U/kg-ads irrespective of percent DOG. The performance of the adsorbents with respect to uranium adsorption in natural seawater was also investigated using flow-throughcolumn testing at the Pacific Northwest National Laboratory (PNNL). Three hours of KOH conditioning led to higher uranium uptake than 1 h of conditioning. The adsorbent AI11, containing AN and VPA at the mole ratio of 3.52, emerged as the potential candidate for the highest uranium adsorption (3.35 g-U/kg-ads.) after 56 days of exposure in seawater flow-through-columns. The rate of vanadium adsorption over uranium linearly increased throughout the 56 days of exposure. The total mass of vanadium uptake was ~5 times greater than uranium after 56 days.« less

  15. Uranium-Loaded Water Treatment Resins: 'Equivalent Feed' at NRC and Agreement State-Licensed Uranium Recovery Facilities - 12094

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Camper, Larry W.; Michalak, Paul; Cohen, Stephen

    Community Water Systems (CWSs) are required to remove uranium from drinking water to meet EPA standards. Similarly, mining operations are required to remove uranium from their dewatering discharges to meet permitted surface water discharge limits. Ion exchange (IX) is the primary treatment strategy used by these operations, which loads uranium onto resin beads. Presently, uranium-loaded resin from CWSs and mining operations can be disposed as a waste product or processed by NRC- or Agreement State-licensed uranium recovery facilities if that licensed facility has applied for and received permission to process 'alternate feed'. The disposal of uranium-loaded resin is costly andmore » the cost to amend a uranium recovery license to accept alternate feed can be a strong disincentive to commercial uranium recovery facilities. In response to this issue, the NRC issued a Regulatory Issue Summary (RIS) to clarify the agency's policy that uranium-loaded resin from CWSs and mining operations can be processed by NRC- or Agreement State-licensed uranium recovery facilities without the need for an alternate feed license amendment when these resins are essentially the same, chemically and physically, to resins that licensed uranium recovery facilities currently use (i.e., equivalent feed). NRC staff is clarifying its current alternate feed policy to declare IX resins as equivalent feed. This clarification is necessary to alleviate a regulatory and financial burden on facilities that filter uranium using IX resin, such as CWSs and mine dewatering operations. Disposing of those resins in a licensed facility could be 40 to 50 percent of the total operations and maintenance (O and M) cost for a CWS. Allowing uranium recovery facilities to treat these resins without requiring a license amendment lowers O and M costs and captures a valuable natural resource. (authors)« less

  16. Anthropometric, metabolic, psychosocial and dietary factors associated with dropout in overweight and obese postmenopausal women engaged in a 6-month weight loss programme: a MONET study.

    PubMed

    Messier, Virginie; Hayek, Jessy; Karelis, Antony D; Messier, Lyne; Doucet, Eric; Prud'homme, Denis; Rabasa-Lhoret, Rémi; Strychar, Irene

    2010-04-01

    The objective of the present study was to examine anthropometric, metabolic, psychosocial and dietary factors associated with dropout in a 6-month weight loss intervention aimed at reducing body weight by 10 %. The study sample included 137 sedentary, overweight and obese postmenopausal women, participating in a weight loss intervention that consisted of either energy restriction (ER) or ER with resistance training (ER+RT). Anthropometric (BMI, percent lean body mass, percent fat mass, visceral adipose tissue and waist circumference), metabolic (total energy expenditure, RMR, insulin sensitivity and fasting plasma levels of leptin and ghrelin), psychosocial (body esteem, self-esteem, stress, dietary restraint, disinhibition, hunger, quality of life, self-efficacy, perceived benefits for controlling weight and perceived risk) and dietary (3-d food record) variables were measured. Thirty subjects out of 137 dropped out of the weight loss programme (22 %), with no significant differences in dropout rates between those in the ER and the ER+RT groups. Overall, amount of weight loss was significantly lower in dropouts than in completers ( - 1.7 (sd 3.5) v. - 5.6 (sd 4.3) kg, P < 0.05); weekly weight loss during the first 4 weeks was also significantly lower. Dropouts consumed fewer fruit servings than completers (1.7 (sd 1.1) v. 2.7 (sd 1.53), P < 0.05) and had higher insulin sensitivity levels (12.6 (sd 3.8) v. 11.1 (sd 2.8) mg glucose/min per kg fat-free mass, P < 0.05). The present results suggest that the rate of weight loss during the first weeks of an intervention plays an important role in the completion of the programme. Thus, participants with low rates of initial weight loss should be monitored intensely to undertake corrective measures to increase the likelihood of completion.

  17. 12 CFR 3.152 - Simple risk weight approach (SRWA).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... applicable risk weight in this section. (1) Zero percent risk weight equity exposures. An equity exposure to... assigned a zero percent risk weight. (2) 20 percent risk weight equity exposures. An equity exposure to a... equals zero. If RVC is negative and greater than or equal to -1 (that is, between zero and -1), then E...

  18. Predictors of long-term weight maintenance.

    PubMed

    Vogels, Neeltje; Diepvens, Kristel; Westerterp-Plantenga, Margriet S

    2005-12-01

    The purpose of this study was to evaluate available variables of a long-term weight maintenance study to investigate possible factors predisposing to weight regain after a period of weight loss. The Maastricht Weight Maintenance Study is an ongoing longitudinal study of healthy men and women (29 men and 62 women; 18 to 65 years of age; BMI = 30.2 +/- 3.1 kg/m(2)). A variety of parameters were measured before and after a very-low-energy diet and after a follow-up of at least 2 years. Mean weight loss was 7.9 +/- 3.6 kg, and percent weight regain was 113.8 +/- 98.1%. Percent BMI regain was negatively associated with an increase in dietary restraint (r = -0.47, p < 0.05). Percent weight regain was negatively correlated with baseline resting metabolic rate (r = -0.38, p = 0.01) and baseline fat mass (r = -0.24, p = 0.05) and positively correlated with the magnitude of change in body weight (BW) expressed as maximum amplitude of BW (r = 0.21, p < 0.05). In addition, amplitude of BW was positively correlated with the frequency of dieting (r = 0.57, p < 0.01). The best predictors for weight maintenance after weight loss were an increase in dietary restraint during weight loss, a high baseline resting metabolic rate, a relatively high baseline fat mass favoring a fat-free mass-sparing effect during weight loss, a rather stable BW, and a low frequency of dieting. Therefore, BW maintenance after BW loss seems to be a multifactorial issue, including mechanisms that regulate an individuals' energy expenditure, body composition, and eating behavior in such a way that energy homeostasis is maintained.

  19. The American Indian and Alaska Native dentist workforce in the United States.

    PubMed

    Mertz, Elizabeth; Wides, Cynthia; Gates, Paul

    2017-03-01

    The purpose of this article is to describe the American Indian/Alaska Native (AI/AN) dentist workforce, the general practice patterns of these providers, and their contributions to oral health care for AI/AN and underserved patients. A national sample survey of underrepresented minority dentists was conducted in 2012 and received a 34 percent response rate for self-reported AI/AN dentists. Data were weighted for selection and response bias to be nationally representative. Descriptive and multivariable statistics were computed to provide a workforce profile. Comparisons to Census data and published information on dental students and dentists were used to examine practice patterns. The AI/AN dentist workforce (weighted n = 442) is very diverse with 55 reported individual tribal affiliations. Tribal heritage was provided by 95.7 percent of AI/AN dentists (n = 423), and of these, 93.9 percent (n = 400) reported an affiliation with only one tribe. The largest share of AI/AN dentists were born in the United States (98.2 percent, n = 434), married (75.6 percent, n = 333), and had dependent children under age 18 (52.0 percent, n = 222). Only 0.9 percent (n = 4) of AI/AN dentists spoke a traditional AI/AN language in patient care, while 10.6 percent (n = 46) were raised on tribal land or reservation. Initial practice in the Indian Health Service was reported by 15.8 percent of AI/AN dentists while 16.2 percent report currently practicing in a safety-net setting, and 42.0 percent report working in a practice that primarily serves underserved patients. AI/AN dentists provide a disproportionate share of care for AI/AN populations, yet the number of AI/AN dentists would need to increase 7.4-fold in order to meet population parity. © 2016 American Association of Public Health Dentistry.

  20. Frequently Asked Questions (FAQs)

    Science.gov Websites

    DUF6 Guide DU Uses DUF6 Management and Uses DUF6 Conversion EIS Documents News FAQs Internet Resources , uranium hexafluoride (UF6), UF6 storage and depleted UF6 management. Below is a list of frequently asked management of depleted uranium. Click a question below to see the answer. Uranium and Its Properties What is

  1. 27 CFR 21.105 - Citronella oil, natural.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... percent by weight. (2) Aldehyde content (as Citronellal). Not less than 30 percent by weight. (3...) Aldehyde content (as Citronellal). Not less than 7 percent by weight. (3) Refractive index at 20 °C. 1.4790...

  2. 27 CFR 21.105 - Citronella oil, natural.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... percent by weight. (2) Aldehyde content (as Citronellal). Not less than 30 percent by weight. (3...) Aldehyde content (as Citronellal). Not less than 7 percent by weight. (3) Refractive index at 20 °C. 1.4790...

  3. 27 CFR 21.105 - Citronella oil, natural.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... percent by weight. (2) Aldehyde content (as Citronellal). Not less than 30 percent by weight. (3...) Aldehyde content (as Citronellal). Not less than 7 percent by weight. (3) Refractive index at 20 °C. 1.4790...

  4. 27 CFR 21.105 - Citronella oil, natural.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... percent by weight. (2) Aldehyde content (as Citronellal). Not less than 30 percent by weight. (3...) Aldehyde content (as Citronellal). Not less than 7 percent by weight. (3) Refractive index at 20 °C. 1.4790...

  5. 27 CFR 21.105 - Citronella oil, natural.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... percent by weight. (2) Aldehyde content (as Citronellal). Not less than 30 percent by weight. (3...) Aldehyde content (as Citronellal). Not less than 7 percent by weight. (3) Refractive index at 20 °C. 1.4790...

  6. A preliminary report on the geology of the Dennison-Bunn uranium claim, Sandoval County, New Mexico

    USGS Publications Warehouse

    Ridgley, Jennie L.

    1978-01-01

    Uranium at the Dennison-Bunn claim, south of Cuba, N. Mex., along the east margin of the San Juan Basin, occurs in unoxidized gray, fluvial channel sandstone of the Westwater Canyon Member of the Upper Jurassic Morrison Formation. The uranium-bearing sandstone is bounded on the north and south by a variable zone of buff and orange sandstone. Within the mineralized zone, the uranium has been remobilized and reconcentrated along the margins of numerous smaller tongues of oxidized rock in a configuration similar to that found in roll-type uranium deposits. In cross section, these small-scale features are zoned; they have an inner, pale orange, oxidized core, a mineralized redox rim cemented with hematite(?), and an outer-shell of -gray, slightly to moderately mineralized rock. The uranium content in the mineralized rock ranges from 0.001 to 0.07 percent U3O8. The uranium, at this locality, is believed to have originated within the Westwater Canyon Member or to have been derived from the overlying Brushy Basin Member. Based on observed outcrop relations, two hypotheses are proposed for explaining the origin of the occurrence. Briefly these hypotheses are: (1) the mineralized zone represents the remnant of an original roll-type uranium deposit, formed during early Eocene time, which has undergone subsequent oxidation with remobilization and redeposition of uranium around the margins of smaller tongues of oxidized rock; and (2) the mineralized zone represents the remnant of an original tabular deposit which has undergone subsequent oxidation with remobilization and redeposition of uranium around the margins of smaller tongues of oxidized rock.

  7. NITRIC ACID PICKLING PROCESS

    DOEpatents

    Boller, E.R.; Eubank, L.D.

    1958-08-19

    An improved process is described for the treatment of metallic uranium surfaces preparatory to being given hot dip coatings. The process consists in first pickling the uraniunn surInce with aqueous 50% to 70% nitric acid, at 60 to 70 deg C, for about 5 minutes, rinsing the acid solution from the uranium article, promptly drying and then passing it through a molten alkali-metal halide flux consisting of 42% LiCl, 53% KCla and 5% NaCl into a molten metal bath consisting of 85 parts by weight of zinc and 15 parts by weight of aluminum

  8. Comparison of Cross Flow Filtration Performance for Manganese Oxide/Sludge Mixtures and Monosodium Titanate/Sludge Mixtures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Poirier, M.R.

    2002-06-07

    Personnel performed engineering-scale tests at the Filtration Research Engineering Demonstration (FRED) to determine crossflow filter performance with a 5.6 M sodium solution containing varying concentrations of sludge and sodium permanganate. The work represents another in a series of collaborative efforts between the University of South Carolina and the Savannah River Technology Center in support of the process development efforts for the Savannah River Site. The current tests investigated filter performance with slurry containing simulated Tank 40H Sludge and sodium permanganate at concentrations between 0.070 weight percent and 3.04 weight percent insoluble solids.

  9. Abrasion resistant composition

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fischer, Keith D; Barnes, Christopher A; Henderson, Stephen L

    A surface covering composition of abrasion resistant character adapted for disposition in overlying bonded relation to a metal substrate. The surface covering composition includes metal carbide particles within a metal matrix at a packing factor of not less than about 0.6. Not less than about 40 percent by weight of the metal carbide particles are characterized by an effective diameter in the range of +14-32 mesh prior to introduction to the metal matrix. Not less than about 3 percent by weight of the metal carbide particles are characterized by an effective diameter of +60 mesh prior to introduction to themore » metal matrix.« less

  10. Effect of Ozone Addition on Combustion Efficiency of Hydrogen: Liquid-Oxygen Propellant in Small Rockets

    NASA Technical Reports Server (NTRS)

    Miller, Riley O.; Brown, Dwight D.

    1959-01-01

    An experimental study shows that 2 percent by weight ozone in oxygen has little effect on overall reactivity for a range of oxidant-fuel weight ratios from 1 to 6. This conclusion is based on characteristic-velocity measurements in 200-pound-thrust chambers at a pressure of 300 pounds per square inch absolute with low-efficiency injectors. The presence of 9 percent ozone in oxygen also did not affect performance in an efficient chamber. Explosions were encountered when equipment or procedure permitted ozone to concentrate locally. These experiments indicate that even small amounts of ozone in oxygen can cause operational problems.

  11. 75 FR 62101 - Stainless Steel Sheet and Strip in Coils From the Republic of Korea: Final Results of Expedited...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-07

    ... and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less..., phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less than 0.002... comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03...

  12. High temperature UF6 RF plasma experiments applicable to uranium plasma core reactors

    NASA Technical Reports Server (NTRS)

    Roman, W. C.

    1979-01-01

    An investigation was conducted using a 1.2 MW RF induction heater facility to aid in developing the technology necessary for designing a self critical fissioning uranium plasma core reactor. Pure, high temperature uranium hexafluoride (UF6) was injected into an argon fluid mechanically confined, steady state, RF heated plasma while employing different exhaust systems and diagnostic techniques to simulate and investigate some potential characteristics of uranium plasma core nuclear reactors. The development of techniques and equipment for fluid mechanical confinement of RF heated uranium plasmas with a high density of uranium vapor within the plasma, while simultaneously minimizing deposition of uranium and uranium compounds on the test chamber peripheral wall, endwall surfaces, and primary exhaust ducts, is discussed. The material tests and handling techniques suitable for use with high temperature, high pressure, gaseous UF6 are described and the development of complementary diagnostic instrumentation and measurement techniques to characterize the uranium plasma, effluent exhaust gases, and residue deposited on the test chamber and exhaust system components is reported.

  13. Thorium-uranium fractionation by garnet - Evidence for a deep source and rapid rise of oceanic basalts

    NASA Technical Reports Server (NTRS)

    Latourrette, T. Z.; Kennedy, A. K.; Wasserburg, G. J.

    1993-01-01

    Mid-ocean ridge basalts (MORBs) and ocean island basalts (OIBs) are derived by partial melting of the upper mantle and are marked by systematic excesses of thorium-230 activity relative to the activity of its parent, uranium-238. Experimental measurements of the distribution of thorium and uranium between the melt and solid residue show that, of the major phases in the upper mantle, only garnet will retain uranium over thorium. This sense of fractionation, which is opposite to that caused by clinopyroxene-melt partitioning, is consistent with the thorium-230 excesses observed in young oceanic basalts. Thus, both MORBs and OIBs must begin partial melting in the garnet stability field or below about 70 kilometers. A calculation shows that the thorium-230-uranium-238 disequilibrium in MORBs can be attributed to dynamic partial melting beginning at 80 kilometers with a melt porosity of 0.2 percent or more. This result requires that melting beneath ridges occurs in a wide region and that the magma rises to the surface at a velocity of at least 0.9 meter per year.

  14. Economic geology of the Central City district, Gilpin County, Colorado

    USGS Publications Warehouse

    Sims, P.K.; Drake, Avery A.; Tooker, E.W.

    1963-01-01

    The Central City district, in Gilpin County, Colo., is on the east flank of the Front Range, about 30 miles west of Denver. The district is the most important mining camp in the Front Range mineral belt, and has yielded more than $100 million worth of gold, silver, uranium, and base-metal ores since 1859. Gold accounts for about 85 percent of the dollar value of the ore. In recent years mining activity has been slack but from 1950 to 1955 the search for uranium ores stimulated prospecting and development.

  15. Excess lead in "rusty rock" 66095 and implications for an early lunar differentiation

    USGS Publications Warehouse

    Nunes, P.D.; Tatsumoto, M.

    1973-01-01

    Apollo 16 breccia 66095 contains a remarkably high amount of lead (15 part's per million), 85 percent of which is not supported by uranium and thorium in the rock. An acid leach experiment coupled with separate analyses of the whole rock and mineral fractions for uranium, thorium, and lead indicate that the excess lead has a lunar source and was apparently introduced about 4.0 X 109 years ago. The data also suggest that a major lunar crustal differentiation occurred about 4.47 X 109 years ago.

  16. Personal Care Product Use in Men and Urinary Concentrations of Select Phthalate Metabolites and Parabens: Results from the Environment And Reproductive Health (EARTH) Study.

    PubMed

    Nassan, Feiby L; Coull, Brent A; Gaskins, Audrey J; Williams, Michelle A; Skakkebaek, Niels E; Ford, Jennifer B; Ye, Xiaoyun; Calafat, Antonia M; Braun, Joseph M; Hauser, Russ

    2017-08-18

    Personal care products (PCPs) are exposure sources to phthalates and parabens; however, their contribution to men's exposure is understudied. We examined the association between PCP use and urinary concentrations of phthalate metabolites and parabens in men. In a prospective cohort, at multiple study visits, men self-reported their use of 14 PCPs and provided a urine sample (2004-2015, Boston, MA). We measured urinary concentrations of 9 phthalate metabolites and methylparaben, propylparaben, and butylparaben. We estimated the covariate-adjusted percent change in urinary concentrations associated with PCP use using linear mixed and Tobit mixed regressions. We also estimated weights for each PCP in a weighted binary score regression and modeled the resulting composite weighted PCP use. Four hundred men contributed 1,037 urine samples (mean of 3/man). The largest percent increase in monoethyl phthalate (MEP) was associated with use of cologne/perfume (83%, p -value<0.01) and deodorant (74%, p -value<0.01). In contrast, the largest percent increase for parabens was associated with the use of suntan/sunblock lotion (66-156%) and hand/body lotion (79-147%). Increases in MEP and parabens were generally greater with PCP use within 6 h of urine collection. A subset of 10 PCPs that were used within 6 h of urine collection contributed to at least 70% of the weighted score and predicted a 254-1,333% increase in MEP and parabens concentrations. Associations between PCP use and concentrations of the other phthalate metabolites were not statistically significant. We identified 10 PCPs of relevance and demonstrated that their use within 6 h of urine collection strongly predicted MEP and paraben urinary concentrations. https://doi.org/10.1289/EHP1374.

  17. In-situ removal and characterisation of uranium-containing particles from sediments surrounding the Fukushima Daiichi Nuclear Power Plant

    NASA Astrophysics Data System (ADS)

    Martin, P. G.; Griffiths, I.; Jones, C. P.; Stitt, C. A.; Davies-Milner, M.; Mosselmans, J. F. W.; Yamashiki, Y.; Richards, D. A.; Scott, T. B.

    2016-03-01

    Traditional methods to locate and subsequently study radioactive fallout particles have focused heavily on autoradiography coupled with in-situ analytical techniques. Presented here is the application of a Variable Pressure Scanning Electron Microscope with both backscattered electron and energy dispersive spectroscopy detectors, along with a micromanipulator setup and electron-hardening adhesive to isolate and remove individual particles before synchrotron radiation analysis. This system allows for a greater range of new and existing analytical techniques, at increased detail and speed, to be applied to the material. Using this method, it was possible to erform detailed energy dispersive spectroscopy and synchrotron radiation characterisation of material likely ejected from the Fukushima Daiichi Nuclear Power Plant found within a sediment sample collected from the edge of the 30 km exclusion zone. Particulate material sub-micron in maximum dimension examined during this work via energy dispersive spectroscopy was observed to contain uranium at levels between 19.68 and 28.35 weight percent, with the application of synchrotron radiation spectroscopy confirming its presence as a major constituent. With great effort and cost being devoted to the remediation of significant areas of eastern Japan affected by the incident, it is crucial to gain the greatest possible understanding of the nature of this contamination in order to inform the most appropriate clean-up response.

  18. PREPARATION OF URANIUM TRIOXIDE

    DOEpatents

    Buckingham, J.S.

    1959-09-01

    The production of uranium trioxide from aqueous solutions of uranyl nitrate is discussed. The uranium trioxide is produced by adding sulfur or a sulfur-containing compound, such as thiourea, sulfamic acid, sulfuric acid, and ammonium sulfate, to the uranyl solution in an amount of about 0.5% by weight of the uranyl nitrate hexahydrate, evaporating the solution to dryness, and calcining the dry residue. The trioxide obtained by this method furnished a dioxide with a considerably higher reactivity with hydrogen fluoride than a trioxide prepared without the sulfur additive.

  19. Dupoly process for treatment of depleted uranium and production of beneficial end products

    DOEpatents

    Kalb, Paul D.; Adams, Jay W.; Lageraaen, Paul R.; Cooley, Carl R.

    2000-02-29

    The present invention provides a process of encapsulating depleted uranium by forming a homogenous mixture of depleted uranium and molten virgin or recycled thermoplastic polymer into desired shapes. Separate streams of depleted uranium and virgin or recycled thermoplastic polymer are simultaneously subjected to heating and mixing conditions. The heating and mixing conditions are provided by a thermokinetic mixer, continuous mixer or an extruder and preferably by a thermokinetic mixer or continuous mixer followed by an extruder. The resulting DUPoly shapes can be molded into radiation shielding material or can be used as counter weights for use in airplanes, helicopters, ships, missiles, armor or projectiles.

  20. Extinguishing agent for combustible metal fires

    DOEpatents

    Riley, John F.; Stauffer, Edgar Eugene

    1976-10-12

    A low chloride extinguishing agent for combustible metal fires comprising from substantially 75 to substantially 94 weight percent of sodium carbonate as the basic fire extinguishing material, from substantially 1 to substantially 5 weight percent of a water-repellent agent such as a metal stearate, from substantially 2 to substantially 10 weight percent of a flow promoting agent such as attapulgus clay, and from substantially 3 to substantially 15 weight percent of a polyamide resin as a crusting agent.

  1. Weight loss, weight regain, and conversions to Roux-en-Y gastric bypass: 10-year results of laparoscopic sleeve gastrectomy.

    PubMed

    Felsenreich, Daniel M; Langer, Felix B; Kefurt, Ronald; Panhofer, Peter; Schermann, Martin; Beckerhinn, Philipp; Sperker, Christoph; Prager, Gerhard

    2016-11-01

    With promising short-term results, laparoscopic sleeve gastrectomy (SG) has become the second most frequently performed bariatric procedure worldwide. Aside from a growing number of reports covering up to 10 years of follow-up, only limited data have been published so far on long-term results. The aim of the study was to present a 10-year follow-up for SG. University hospital setting, Austria. We present the first complete 10-year follow-up of 53 consecutive patients who underwent SG before 2006. In this multicenter study, weight loss success, weight regain, and revisional surgery were analyzed beside Bariatric Analysis and Reporting Outcome System (BAROS) scores. A mean maximum percent excess weight loss of 71±25% (percent total weight loss: 28±15%) was reached at a median of 12 (range 12-120) months after SG. At 10 years, a mean percent excess weight loss of 53±25% was achieved by 32 patients, corresponding to a percent total weight loss of 26.3±13.4%. Nineteen of the 53 patients (36%) were converted to Roux-en-Y gastric bypass (n = 18) or duodenal switch (n = 1) due to significant weight regain (n = 11), reflux (n = 6), or acute revision (n = 2) at a median of 36 months. Two patients died at 3 and 101 months postoperatively, unrelated to SG. A total of 31 patients (59%) suffered from weight regain of 10 kg or more, among them 24 patients (45%) with 15 kg or more, 16 patients (30%) with 20 kg or more, and 7 patients (13%) with 25 kg or more weight regain from nadir. Mean BAROS score was 2.4±2.2 at 10 years follow-up, classifying SG as "fairly efficient." Within a long-term follow-up of 10 years or more after SG, a high incidence of both significant weight regain and intractable reflux was observed, leading to conversion, most commonly to Roux-en-Y gastric bypass. Copyright © 2016 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

  2. Effects of protein intake and gender on body composition changes: a randomized clinical weight loss trial

    PubMed Central

    2012-01-01

    Abstract Limited data on sex differences in body composition changes in response to higher protein diets (PRO) compared to higher carbohydrate diets (CARB) suggest that a PRO diet helps preserve lean mass (LM) in women more so than in men. Objective To compare male and female body composition responses to weight loss diets differing in macronutrient content. Design Twelve month randomized clinical trial with 4mo of weight loss and 8mo weight maintenance. Subjects Overweight (N = 130; 58 male (M), 72 female (F); BMI = 32.5 ± 0.5 kg/m2) middle-aged subjects were randomized to energy-restricted (deficit ~500 kcal/d) diets providing protein at 1.6 g.kg-1.d-1 (PRO) or 0.8 g.kg-1.d-1 (CARB). LM and fat mass (FM) were measured using dual X-ray absorptiometry. Body composition outcomes were tested in a repeated measures ANOVA controlling for sex, diet, time and their two- and three-way interactions at 0, 4, 8 and 12mo. Results When expressed as percent change from baseline, males and females lost similar amounts of weight at 12mo (M:-11.2 ± 7.1 %, F:-9.9 ± 6.0 %), as did diet groups (PRO:-10.7 ± 6.8 %, CARB:-10.1 ± 6.2 %), with no interaction of gender and diet. A similar pattern emerged for fat mass and lean mass, however percent body fat was significantly influenced by both gender (M:-18.0 ± 12.8 %, F:-7.3 ± 8.1 %, p < 0.05) and diet (PRO:-14.3 ± 11.8 %, CARB:-9.3 ± 11.1 %, p < 0.05), with no gender-diet interaction. Compared to women, men carried an extra 7.0 ± 0.9 % of their total body fat in the trunk (P < 0.01) at baseline, and reduced trunk fat during weight loss more than women (M:-3.0 ± 0.5 %, F:-1.8 ± 0.3 %, p < 0.05). Conversely, women carried 7.2 ± 0.9 % more total body fat in the legs, but loss of total body fat in legs was similar in men and women. Conclusion PRO was more effective in reducing percent body fat vs. CARB over 12mo weight loss and maintenance. Men lost percent total body fat and trunk fat more effectively than women. No interactive effects of protein intake and gender are evident. PMID:22691622

  3. The ultimate mineral processing challenge: Recovery of rare earths, phosphorus and uranium from Florida phosphatic clay

    DOE PAGES

    Zhang, Patrick; Liang, Haijun; Jin, Zhen; ...

    2017-11-01

    We report phosphate beneficiation in Florida generates more than one tonne of phosphatic clay, or slime, per tonne of phosphate rock produced. Since the start of the practice of large-scale washing and desliming for phosphate beneficiation, more than 2 Gt of slime has accumulated, containing approximately 600 Mt of phosphate rock, 600 kt of rare earth elements (REEs) and 80 million kilograms of uranium. The recovery of these valuable elements from the phosphatic clay is one of the most challenging endeavors in mineral processing, because the clay is extremely dilute, with an average solids concentration of 3 percent, and finemore » in size, with more than 50 percent having particle size smaller than 2 μm, and it contains nearly 50 percent clay minerals as well as large amounts of magnesium, iron and aluminum. With industry support and under funding from the Critical Materials Institute, the Florida Industrial and Phosphate Research Institute in conjunction with the Oak Ridge National Laboratory undertook the task to recover phosphorus, rare earths and uranium from Florida phosphatic clay. This paper presents the results from the preliminary testing of two approaches. The first approach involves three-stage cycloning using cyclones with diameters of 12.4 cm (5 in.), 5.08 cm (2 in.) and 2.54 cm (1 in.), respectively, to remove clay minerals followed by flotation and leaching. The second approach is a two-step leaching process. In the first step, selective leaching was conducted to remove magnesium, thus allowing the production of phosphoric acid suitable for the manufacture of diammonium phosphate (DAP) in the second leaching step. The results showed that multistage cycloning with small cyclones is necessary to remove clay minerals. Finally, selective leaching at about pH 3.2 using sulfuric acid was found to be effective for removing more than 80 percent of magnesium from the feed with minimal loss of phosphorus.« less

  4. The ultimate mineral processing challenge: Recovery of rare earths, phosphorus and uranium from Florida phosphatic clay

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Patrick; Liang, Haijun; Jin, Zhen

    We report phosphate beneficiation in Florida generates more than one tonne of phosphatic clay, or slime, per tonne of phosphate rock produced. Since the start of the practice of large-scale washing and desliming for phosphate beneficiation, more than 2 Gt of slime has accumulated, containing approximately 600 Mt of phosphate rock, 600 kt of rare earth elements (REEs) and 80 million kilograms of uranium. The recovery of these valuable elements from the phosphatic clay is one of the most challenging endeavors in mineral processing, because the clay is extremely dilute, with an average solids concentration of 3 percent, and finemore » in size, with more than 50 percent having particle size smaller than 2 μm, and it contains nearly 50 percent clay minerals as well as large amounts of magnesium, iron and aluminum. With industry support and under funding from the Critical Materials Institute, the Florida Industrial and Phosphate Research Institute in conjunction with the Oak Ridge National Laboratory undertook the task to recover phosphorus, rare earths and uranium from Florida phosphatic clay. This paper presents the results from the preliminary testing of two approaches. The first approach involves three-stage cycloning using cyclones with diameters of 12.4 cm (5 in.), 5.08 cm (2 in.) and 2.54 cm (1 in.), respectively, to remove clay minerals followed by flotation and leaching. The second approach is a two-step leaching process. In the first step, selective leaching was conducted to remove magnesium, thus allowing the production of phosphoric acid suitable for the manufacture of diammonium phosphate (DAP) in the second leaching step. The results showed that multistage cycloning with small cyclones is necessary to remove clay minerals. Finally, selective leaching at about pH 3.2 using sulfuric acid was found to be effective for removing more than 80 percent of magnesium from the feed with minimal loss of phosphorus.« less

  5. Multiple Application Propfan Study (MAPS): Advanced tactical transport

    NASA Technical Reports Server (NTRS)

    Newton, F. C.; Liebeck, R. H.; Mitchell, G. H.; Mooiweer, A.; Platte, M. M.; Toogood, T. L.; Wright, R. A.

    1986-01-01

    This study was conducted to ascertain potential benefits of a propfan propulsion system application to a blended wing/body military tactical transport. Based on a design cruise Mach no. of 0.75 for the design mission, the results indicate a significant advantage in various figures of merit for the propfan over those of a comparable technology turbofan. Although the propfan has a 1.6 percent greater takeoff gross weight, its life cycle cost is 5.3 percent smaller, partly because of a 27 percent smaller specific fuel consumption. When employed on alternate missions, the propfan configuration offers significantly improved flexibility and capability: an increase in sea level penetration distance of more than 100 percent, or in time-on-station of 24 percent, or in deployment payload of 38 percent.

  6. Weight Gain after Lung Reduction Surgery Is Related to Improved Lung Function and Ventilatory Efficiency

    PubMed Central

    Kretschman, Dana M.; Sternberg, Alice L.; DeCamp, Malcolm M.; Criner, Gerard J.

    2012-01-01

    Rationale: Lung volume reduction surgery (LVRS) is associated with weight gain in some patients, but the group that gains weight after LVRS and the mechanisms underlying this phenomenon have not been well characterized. Objectives: To describe the weight change profiles of LVRS patients enrolled in the National Emphysema Treatment Trial (NETT) and to correlate alterations in lung physiological parameters with changes in weight. Methods: We divided 1,077 non–high-risk patients in the NETT into groups according to baseline body mass index (BMI): underweight (<21 kg/m2), normal weight (21–25 kg/m2), overweight (25–30 kg/m2), and obese (>30 kg/m2). We compared BMI groups and LVRS and medical groups within each BMI stratum with respect to baseline characteristics and percent change in BMI (%ΔBMI) from baseline. We examined patients with (ΔBMI ≥ 5%) and without (ΔBMI < 5%) significant weight gain at 6 months and assessed changes in lung function and ventilatory efficiency (V̇e/V̇co2). Measurements and Main Results: The percent change in BMI was greater in the LVRS arm than in the medical arm in the underweight and normal weight groups at all follow-up time points, and at 12 and 24 months in the overweight group. In the LVRS group, patients with ΔBMI ≥ 5% at 6 months had greater improvements in FEV1 (11.53 ± 9.31 vs. 6.58 ± 8.68%; P < 0.0001), FVC (17.51 ± 15.20 vs. 7.55 ± 14.88%; P < 0.0001), residual volume (–66.20 ± 40.26 vs. –47.06 ± 39.87%; P < 0.0001), 6-minute walk distance (38.70 ± 69.57 vs. 7.57 ± 73.37 m; P < 0.0001), maximal expiratory pressures (12.73 ± 49.08 vs. 3.54 ± 32.22; P = 0.0205), and V̇e/V̇co2 (–1.58 ± 6.20 vs. 0.22 ± 8.20; P = 0.0306) at 6 months than patients with ΔBMI < 5% at 6 months. Conclusions: LVRS leads to weight gain in nonobese patients, which is associated with improvement in lung function, exercise capacity, respiratory muscle strength, and ventilatory efficiency. These physiological changes may be partially responsible for weight gain in patients who undergo LVRS. PMID:22878279

  7. Weight gain after lung reduction surgery is related to improved lung function and ventilatory efficiency.

    PubMed

    Kim, Victor; Kretschman, Dana M; Sternberg, Alice L; DeCamp, Malcolm M; Criner, Gerard J

    2012-12-01

    Lung volume reduction surgery (LVRS) is associated with weight gain in some patients, but the group that gains weight after LVRS and the mechanisms underlying this phenomenon have not been well characterized. To describe the weight change profiles of LVRS patients enrolled in the National Emphysema Treatment Trial (NETT) and to correlate alterations in lung physiological parameters with changes in weight. We divided 1,077 non-high-risk patients in the NETT into groups according to baseline body mass index (BMI): underweight (<21 kg/m(2)), normal weight (21-25 kg/m(2)), overweight (25-30 kg/m(2)), and obese (>30 kg/m(2)). We compared BMI groups and LVRS and medical groups within each BMI stratum with respect to baseline characteristics and percent change in BMI (%ΔBMI) from baseline. We examined patients with (ΔBMI ≥ 5%) and without (ΔBMI < 5%) significant weight gain at 6 months and assessed changes in lung function and ventilatory efficiency (Ve/Vco(2)). The percent change in BMI was greater in the LVRS arm than in the medical arm in the underweight and normal weight groups at all follow-up time points, and at 12 and 24 months in the overweight group. In the LVRS group, patients with ΔBMI ≥ 5% at 6 months had greater improvements in FEV(1) (11.53 ± 9.31 vs. 6.58 ± 8.68%; P < 0.0001), FVC (17.51 ± 15.20 vs. 7.55 ± 14.88%; P < 0.0001), residual volume (-66.20 ± 40.26 vs. -47.06 ± 39.87%; P < 0.0001), 6-minute walk distance (38.70 ± 69.57 vs. 7.57 ± 73.37 m; P < 0.0001), maximal expiratory pressures (12.73 ± 49.08 vs. 3.54 ± 32.22; P = 0.0205), and Ve/Vco(2) (-1.58 ± 6.20 vs. 0.22 ± 8.20; P = 0.0306) at 6 months than patients with ΔBMI < 5% at 6 months. LVRS leads to weight gain in nonobese patients, which is associated with improvement in lung function, exercise capacity, respiratory muscle strength, and ventilatory efficiency. These physiological changes may be partially responsible for weight gain in patients who undergo LVRS.

  8. Changes in diet quality in a randomized weight loss trial in breast cancer survivors: the lifestyle, exercise, and nutrition (LEAN) study.

    PubMed

    Anderson, Chelsea; Harrigan, Maura; George, Stephanie M; Ferrucci, Leah M; Sanft, Tara; Irwin, Melinda L; Cartmel, Brenda

    2016-01-01

    Obesity is associated with increased breast cancer recurrence and mortality. Though some post-diagnosis weight loss interventions have achieved weight loss outcomes, it is unclear whether they also improve diet quality. In the Lifestyle, Exercise, and Nutrition (LEAN) study, overweight or obese breast cancer survivors were randomized to either usual care group ( n =33) or the 6-month lifestyle intervention ( n =67). Dietary intake was assessed at baseline and 6 months using a validated food frequency questionnaire, and overall diet quality was calculated using the Healthy Eating Index (HEI)-2010 (range 0-100). Intervention effects on diet were evaluated with generalized linear models. Among the 81 participants (51 intervention, 30 usual care) with dietary data, the mean baseline HEI score was 70.5 (s.d.=8.8) and was improved at 6 months (intervention group=6.8 point increase vs usual care=3.1, P =0.09). Intervention group participants achieved greater reductions in percent of energy from total fat (-4.2% vs -1.2%; P =0.013) and saturated fat (-2.2% vs -1.1%; P =0.003), and greater increases in fiber (4.8 g per 1000 kcal vs 1.3 g per 1000 kcal; P =0.007) and fruit (0.5 servings vs 0.0 servings; P =0.006) intake. Intervention group participants who lost ⩾5% body weight ( n =27) demonstrated significantly greater improvements in HEI score (10.4 vs 2.8) than those who lost <5% ( n =23). The intervention increased fruit and fiber intake and decreased percent energy from fat, and those with greater weight loss achieved greater increases in overall diet quality. These findings support the ability of a weight loss intervention to improve diet among breast cancer survivors.

  9. PROCESS FOR DISSOLVING BINARY URANIUM-ZIRCONIUM OR ZIRCONIUM-BASE ALLOYS

    DOEpatents

    Jonke, A.A.; Barghusen, J.J.; Levitz, N.M.

    1962-08-14

    A process of dissolving uranium-- zirconium and zircaloy alloys, e.g. jackets of fuel elements, with an anhydrous hydrogen fluoride containing from 10 to 32% by weight of hydrogen chloride at between 400 and 450 deg C., preferably while in contact with a fluidized inert powder, such as calcium fluoride is described. (AEC)

  10. Roll-on perfume compositions containing polyoxybutylene-polyoxyethylene copolymers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schmolka, I.R.

    1987-05-26

    This patent describes a liquid roll-on composition containing, in weight percent based upon the total composition weight, from 5 percent to 15 percent of a perfume oil, from 25 percent to 40 percent of a volatile alcohol, from 10 percent to 60 percent water, and from 10 percent to 30 percent of a nonionic polyether surfactant. The improvement comprises employing as the nonionic polyether surfactant a cogeneric polyoxybutylene-polyoxyethylene block copolymer.

  11. 21 CFR 74.3106 - D&C Blue No. 6.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... material for coloring plain or chromic collagen absorbable sutures for general surgical use; (iii) Not to exceed 0.5 percent by weight of the suture material for coloring plain or chromic collagen absorbable...

  12. 21 CFR 74.3106 - D&C Blue No. 6.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... material for coloring plain or chromic collagen absorbable sutures for general surgical use; (iii) Not to exceed 0.5 percent by weight of the suture material for coloring plain or chromic collagen absorbable...

  13. 21 CFR 74.3106 - D&C Blue No. 6.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... material for coloring plain or chromic collagen absorbable sutures for general surgical use; (iii) Not to exceed 0.5 percent by weight of the suture material for coloring plain or chromic collagen absorbable...

  14. 21 CFR 74.3106 - D&C Blue No. 6.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... material for coloring plain or chromic collagen absorbable sutures for general surgical use; (iii) Not to exceed 0.5 percent by weight of the suture material for coloring plain or chromic collagen absorbable...

  15. 21 CFR 74.3106 - D&C Blue No. 6.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... material for coloring plain or chromic collagen absorbable sutures for general surgical use; (iii) Not to exceed 0.5 percent by weight of the suture material for coloring plain or chromic collagen absorbable...

  16. 7 CFR 1948.68 - Criteria for designation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) PROGRAM REGULATIONS (CONTINUED) RURAL DEVELOPMENT Section 601 Energy Impacted Area Development Assistance... (as projected by generally acceptable estimates) will increase by eight percent (of the eligible... increases resulting from coal and uranium development activity based on existing tax laws; (ii) Federal...

  17. The effects of paid maternity leave: Evidence from Temporary Disability Insurance.

    PubMed

    Stearns, Jenna

    2015-09-01

    This paper investigates the effects of a large-scale paid maternity leave program on birth outcomes in the United States. In 1978, states with Temporary Disability Insurance (TDI) programs were required to start providing wage replacement benefits to pregnant women, substantially increasing access to antenatal and postnatal paid leave for working mothers. Using natality data, I find that TDI paid maternity leave reduces the share of low birth weight births by 3.2 percent, and the estimated treatment-on-the-treated effect is over 10 percent. It also decreases the likelihood of early term birth by 6.6 percent. Paid maternity leave has particularly large impacts on the children of unmarried and black mothers. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Effect of a High-Protein Diet versus Standard-Protein Diet on Weight Loss and Biomarkers of Metabolic Syndrome: A Randomized Clinical Trial.

    PubMed

    Campos-Nonato, Ismael; Hernandez, Lucia; Barquera, Simon

    2017-01-01

    Some studies have shown that protein-enriched diets can lead to greater weight loss and improvements in biomarkers of metabolic syndrome (MeS) than standard protein diets. Therefore, the aim of this study was to determine the effect of increased protein intake on weight loss in Mexican adults with MeS. Randomized controlled trial in 118 adults aged 47.4 ± 11.5 years and meeting the established criteria for MeS were randomized to prescribed hypocaloric diets (500 kcal less than resting metabolic rate) providing either 0.8 g/kg body weight (standard protein diet (SPD)) or 1.34 g/kg body weight (higher protein diet (HPD)) for 6 months. Body weight, waist circumference, percent body fat by bioimpedance analysis, fasting blood glucose, fasting insulin, hemoglobin A1c, total cholesterol, high-density lipoprotein (HDL) cholesterol, very-low-density lipoprotein (VLDL) cholesterol, triglycerides, C-reactive protein, creatinine, blood urea nitrogen, alanine aminotransferase, aspartate aminotransferase, and gamma-glutamyl transferase were measured at baseline, 3 months and at 6 months. There were 105 subjects (51 for SPD and 54 for HPD) who completed the trial. Overall weight loss was 5.1 ± 3.6 kg in the SPD group compared to 7.0 ± 3.7 kg in the in HPD group. Both groups lost a significant percent of centimeters of waist circumference (SPD -6.5 ± 2.6 cm and HPD -8.8 ± 2.6 cm). There was no statistical difference Except for the varying weight losses the two groups did not show any further differences overall. However in the subgroup judged to be adherent more than 75% of the time with the prescribed diets, there was a significant difference in mean weight loss (SPD -5.8% vs. HPD -9.5%) after adjusting for baseline BMI. Both groups demonstrated significant decreases in waist circumference, glucose, insulin, triglycerides, and VLDL cholesterol, but there were no differences between the groups. There were no changes in blood tests for liver or renal function. There were no significant differences in weight loss and biomarkers of MeS when the overall group was examined, but the participants with more adherence rate in the HPD group lost significantly more weight than adherent participants in the SPD group. © 2017 The Author(s) Published by S. Karger GmbH, Freiburg.

  19. Preparation of High Purity, High Molecular-Weight Chitin from Ionic Liquids for Use as an Adsorbate for the Extraction of Uranium from Seawater

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rogers, Robin

    Ensuring a domestic supply of uranium is a key issue facing the wider implementation of nuclear power. Uranium is mostly mined in Kazakhstan, Australia, and Canada, and there are few high-grade uranium reserves left worldwide. Therefore, one of the most appealing potential sources of uranium is the vast quantity dissolved in the oceans (estimated to be 4.4 billion tons worldwide). There have been research efforts centered on finding a means to extract uranium from seawater for decades, but so far none have resulted in an economically viable product, due in part to the fact that the materials that have beenmore » successfully demonstrated to date are too costly (in terms of money and energy) to produce on the necessary scale. Ionic Liquids (salts which melt below 100{degrees}C) can completely dissolve raw crustacean shells, leading to recovery of a high purity, high molecular weight chitin powder and to fibers and films which can be spun directly from the extract solution suggesting that continuous processing might be feasible. The work proposed here will utilize the unprecedented control this makes possible over the chitin fiber a) to prepare electrospun nanofibers of very high surface area and in specific architectures, b) to modify the fiber surfaces chemically with selective extractant capacity, and c) to demonstrate their utility in the direct extraction and recovery of uranium from seawater. This approach will 1) provide direct extraction of chitin from shellfish waste thus saving energy over the current industrial process for obtaining chitin; 2) allow continuous processing of nanofibers for very high surface area fibers in an economical operation; 3) provide a unique high molecular weight chitin not available from the current industrial process, leading to stronger, more durable fibers; and 4) allow easy chemical modification of the large surface areas of the fibers for appending uranyl selective functionality providing selectivity and ease of stripping. The resulting sorbent should prove economically feasible, as well as providing an overall net energy gain.« less

  20. 76 FR 49726 - Continuation of Antidumping and Countervailing Duty Orders: Stainless Steel Sheet and Strip in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-11

    ... between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent... percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less....05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This...

  1. 75 FR 76700 - Stainless Steel Sheet and Strip in Coils From Taiwan: Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-09

    ... percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less, silicon of... percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less....05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This...

  2. High Nb, Ta, and Al creep- and oxidation-resistant austenitic stainless steel

    DOEpatents

    Brady, Michael P [Oak Ridge, TN; Santella, Michael L [Knoxville, TN; Yamamoto, Yukinori [Oak Ridge, TN; Liu, Chain-tsuan [Oak Ridge, TN

    2010-07-13

    An austenitic stainless steel HTUPS alloy includes, in weight percent: 15 to 30 Ni; 10 to 15 Cr; 2 to 5 Al; 0.6 to 5 total of at least one of Nb and Ta; no more than 0.3 of combined Ti+V; up to 3 Mo; up to 3 Co; up to 1 W; up to 0.5 Cu; up to 4 Mn; up to 1 Si; 0.05 to 0.15 C; up to 0.15 B; up to 0.05 P; up to 1 total of at least one of Y, La, Ce, Hf, and Zr; less than 0.05 N; and base Fe, wherein the weight percent Fe is greater than the weight percent Ni wherein said alloy forms an external continuous scale comprising alumina, nanometer scale sized particles distributed throughout the microstructure, said particles comprising at least one composition selected from the group consisting of NbC and TaC, and a stable essentially single phase fcc austenitic matrix microstructure, said austenitic matrix being essentially delta-ferrite-free and essentially BCC-phase-free.

  3. 12 CFR 217.52 - Simple risk-weight approach (SRWA).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... greater than or equal to −1 (that is, between zero and −1), then E equals the absolute value of RVC. If... this section) by the lowest applicable risk weight in this paragraph (b). (1) Zero percent risk weight... credit exposures receive a zero percent risk weight under § 217.32 may be assigned a zero percent risk...

  4. Analysis of solid uranium samples using a small mass spectrometer

    NASA Astrophysics Data System (ADS)

    Kahr, Michael S.; Abney, Kent D.; Olivares, José A.

    2001-07-01

    A mass spectrometer for isotopic analysis of solid uranium samples has been constructed and evaluated. This system employs the fluorinating agent chlorine trifluoride (ClF 3) to convert solid uranium samples into their volatile uranium hexafluorides (UF 6). The majority of unwanted gaseous byproducts and remaining ClF 3 are removed from the sample vessel by condensing the UF 6 and then pumping away the unwanted gases. The UF 6 gas is then introduced into a quadrupole mass spectrometer and ionized by electron impact ionization. The doubly charged bare metal uranium ion (U 2+) is used to determine the U 235/U 238 isotopic ratio. Precision and accuracy for several isotopic standards were found to be better than 12%, without further calibration of the system. The analysis can be completed in 25 min from sample loading, to UF 6 reaction, to mass spectral analysis. The method is amenable to uranium solid matrices, and other actinides.

  5. Powder-based adsorbents having high adsorption capacities for recovering dissolved metals and methods thereof

    DOEpatents

    Janke, Christopher J.; Dai, Sheng; Oyola, Yatsandra

    2016-05-03

    A powder-based adsorbent and a related method of manufacture are provided. The powder-based adsorbent includes polymer powder with grafted side chains and an increased surface area per unit weight to increase the adsorption of dissolved metals, for example uranium, from aqueous solutions. A method for forming the powder-based adsorbent includes irradiating polymer powder, grafting with polymerizable reactive monomers, reacting with hydroxylamine, and conditioning with an alkaline solution. Powder-based adsorbents formed according to the present method demonstrated a significantly improved uranium adsorption capacity per unit weight over existing adsorbents.

  6. Foam-based adsorbents having high adsorption capacities for recovering dissolved metals and methods thereof

    DOEpatents

    Janke, Christopher J.; Dai, Sheng; Oyola, Yatsandra

    2015-06-02

    Foam-based adsorbents and a related method of manufacture are provided. The foam-based adsorbents include polymer foam with grafted side chains and an increased surface area per unit weight to increase the adsorption of dissolved metals, for example uranium, from aqueous solutions. A method for forming the foam-based adsorbents includes irradiating polymer foam, grafting with polymerizable reactive monomers, reacting with hydroxylamine, and conditioning with an alkaline solution. Foam-based adsorbents formed according to the present method demonstrated a significantly improved uranium adsorption capacity per unit weight over existing adsorbents.

  7. National Hospital Input Price Index

    PubMed Central

    Freeland, Mark S.; Anderson, Gerard; Schendler, Carol Ellen

    1979-01-01

    The national community hospital input price index presented here isolates the effects of prices of goods and services required to produce hospital care and measures the average percent change in prices for a fixed market basket of hospital inputs. Using the methodology described in this article, weights for various expenditure categories were estimated and proxy price variables associated with each were selected. The index is calculated for the historical period 1970 through 1978 and forecast for 1979 through 1981. During the historical period, the input price index increased an average of 8.0 percent a year, compared with an average rate of increase of 6.6 percent for overall consumer prices. For the period 1979 through 1981, the average annual increase is forecast at between 8.5 and 9.0 percent. Using the index to deflate growth in expenses, the level of real growth in expenditures per inpatient day (net service intensity growth) averaged 4.5 percent per year with considerable annual variation related to government and hospital industry policies. PMID:10309052

  8. Cellular localization of uranium in the renal proximal tubules during acute renal uranium toxicity.

    PubMed

    Homma-Takeda, Shino; Kitahara, Keisuke; Suzuki, Kyoko; Blyth, Benjamin J; Suya, Noriyoshi; Konishi, Teruaki; Terada, Yasuko; Shimada, Yoshiya

    2015-12-01

    Renal toxicity is a hallmark of uranium exposure, with uranium accumulating specifically in the S3 segment of the proximal tubules causing tubular damage. As the distribution, concentration and dynamics of accumulated uranium at the cellular level is not well understood, here, we report on high-resolution quantitative in situ measurements by high-energy synchrotron radiation X-ray fluorescence analysis in renal sections from a rat model of uranium-induced acute renal toxicity. One day after subcutaneous administration of uranium acetate to male Wistar rats at a dose of 0.5 mg uranium kg(-1) body weight, uranium concentration in the S3 segment of the proximal tubules was 64.9 ± 18.2 µg g(-1) , sevenfold higher than the mean renal uranium concentration (9.7 ± 2.4 µg g(-1) ). Uranium distributed into the epithelium of the S3 segment of the proximal tubules and highly concentrated uranium (50-fold above mean renal concentration) in micro-regions was found near the nuclei. These uranium levels were maintained up to 8 days post-administration, despite more rapid reductions in mean renal concentration. Two weeks after uranium administration, damaged areas were filled with regenerating tubules and morphological signs of tissue recovery, but areas of high uranium concentration (100-fold above mean renal concentration) were still found in the epithelium of regenerating tubules. These data indicate that site-specific accumulation of uranium in micro-regions of the S3 segment of the proximal tubules and retention of uranium in concentrated areas during recovery are characteristics of uranium behavior in the kidney. Copyright © 2015 John Wiley & Sons, Ltd.

  9. Influence of nutrient medium composition on uranium toxicity and choice of the most sensitive growth related endpoint in Lemna minor.

    PubMed

    Horemans, Nele; Van Hees, May; Saenen, Eline; Van Hoeck, Arne; Smolders, Valérie; Blust, Ronny; Vandenhove, Hildegarde

    2016-01-01

    Uranium (U) toxicity is known to be highly dependent on U speciation and bioavailability. To assess the impact of uranium on plants, a growth inhibition test was set up in the freshwater macrophyte Lemna minor. First growth media with different compositions were tested in order to find a medium fit for testing U toxicity in L. minor. Following arguments were used for medium selection: the ability to sustain L. minor growth, a high solubility of U in the medium and a high percentage of the more toxic U-species namely UO2(2+). Based on these selection criteria a with a low phosphate concentration of 0.5 mg L(-1) and supplemented with 5 mM MES (2-(N-morpholino)ethanesulfonic acid) to ensure pH stability was chosen. This medium also showed highest U toxicity compared to the other tested media. Subsequently a full dose response curve for U was established by exposing L. minor plants to U concentrations ranging from 0.05 μM up to 150 μM for 7 days. Uranium was shown to adversely affect growth of L. minor in a dose dependent manner with EC10, EC30 and EC50 values ranging between 1.6 and 4.8 μM, 7.7-16.4 μM and 19.4-37.2 μM U, respectively, depending on the growth endpoint. Four different growth related endpoints were tested: frond area, frond number, fresh weight and dry weight. Although differences in relative growth rates and associated ECx-values calculated on different endpoints are small (maximal twofold difference), frond area is recommended to be used to measure U-induced growth effects as it is a sensitive growth endpoint and easy to measure in vivo allowing for measurements over time. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Association of the Family Nutrition and Physical Activity Screening Tool with Weight Status, Percent Body Fat, and Acanthosis Nigricans in Children from a Low Socioeconomic, Urban Community.

    PubMed

    Yee, Kimbo E; Pfeiffer, Karin A; Turek, Kelly; Bakhoya, Marion; Carlson, Joseph J; Sharman, Mahesh; Lamb, Erin; Eisenmann, Joey C

    2015-11-05

    To examine the association of the Family Nutrition and Physical Activity (FNPA) screening tool with weight status, percent body fat, and acanthosis nigricans (AN) in 6- to 13-year-old children from a low socioeconomic, urban community. Children (n=415) from four elementary schools located around Flint, Michigan were assessed for body mass index, percent body fat, and AN. The FNPA screening tool was completed by parents. Mann-Whitney U tests were used to assess differences in FNPA score by sex and presence of AN. Logistic regression was used to evaluate the association of the FNPA (tertiles) with weight status and AN. Children with AN (13.7%) had a significantly lower FNPA score (56.3 + 7.1) compared with children without AN (61.0 + 7.1; P<.05). Children with FNPA scores in the lowest tertile (high-risk) had odds ratios of 1.74 (95% CI =1.05 - 2.91) and 2.77 (95% CI =1.22 - 6.27) compared with children with FNPA scores in the highest tertile (low-risk) for being overfat and having AN, respectively. Although the FNPA screening tool did not predict risk for being overweight or obese, it was significantly associated with an increased odds of children at risk for being overfat or having AN.

  11. DUPoly process for treatment of depleted uranium and production of beneficial end products

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kalb, P.D.; Adams, J.W.; Lageraaen, P.R.

    2000-02-29

    The present invention provides a process of encapsulating depleted uranium by forming a homogeneous mixture of depleted uranium and molten virgin or recycled thermoplastic polymer into desired shapes. Separate streams of depleted uranium and virgin or recycled thermoplastic polymer are simultaneously subjected to heating and mixing conditions. The heating and mixing conditions are provided by a thermokinetic mixer, continuous mixer or an extruder and preferably by a thermokinetic mixer or continuous mixer followed by an extruder. The resulting DUPoly shapes can be molded into radiation shielding material or can be used as counter weights for use in airplanes, helicopters, ships,more » missiles, armor or projectiles.« less

  12. 7 CFR 51.1586 - Serious damage.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... of more than 10 percent of the total weight of the potato including peel covering defective area. Any... percent of the total weight of the potato including peel covering defective area. (b) Shriveling, when the... percent of the total weight of the potato including peel covering defective area. (e) Wireworm, grass root...

  13. 7 CFR 51.1586 - Serious damage.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of more than 10 percent of the total weight of the potato including peel covering defective area. Any... percent of the total weight of the potato including peel covering defective area. (b) Shriveling, when the... percent of the total weight of the potato including peel covering defective area. (e) Wireworm, grass root...

  14. 12 CFR 3.37 - Collateralized transactions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... this section: (i) A national bank or Federal savings association may assign a zero percent risk weight... qualifies for a zero percent risk weight under § 3.32. (iii) A national bank or Federal savings association may assign a zero percent risk weight to the collateralized portion of an exposure where: (A) The...

  15. 40 CFR 98.183 - Calculating GHG emissions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... = Carbon content of the lead ore, from the carbon analysis results (percent by weight, expressed as a... = Carbon content of the lead scrap, from the carbon analysis (percent by weight, expressed as a decimal... (tons). CFlux = Carbon content of the flux materials, from the carbon analysis (percent by weight...

  16. Iron aluminide alloy container for solid oxide fuel cells

    DOEpatents

    Judkins, Roddie Reagan; Singh, Prabhakar; Sikka, Vinod Kumar

    2000-01-01

    A container for fuel cells is made from an iron aluminide alloy. The container alloy preferably includes from about 13 to about 22 weight percent Al, from about 2 to about 8 weight percent Cr, from about 0.1 to about 4 weight percent M selected from Zr and Hf, from about 0.005 to about 0.5 weight percent B or from about 0.001 to about 1 weight percent C, and the balance Fe and incidental impurities. The iron aluminide container alloy is extremely resistant to corrosion and metal loss when exposed to dual reducing and oxidizing atmospheres at elevated temperatures. The alloy is particularly useful for containment vessels for solid oxide fuel cells, as a replacement for stainless steel alloys which are currently used.

  17. Health Risk Assessment of Embedded Depleted Uranium: Behavior, Physiology, Histology and Biokenetic Modeling

    DTIC Science & Technology

    1997-10-01

    mg/in) (or in dogs or monkeys exposed for 5 years). Yet uranium concentrations in the kidney were as high as 1.1 tg U/g kidney wet weight in the rat...8.3 in the dog and 17.0 in the monkey), levels reported to cause acute renal toxicity (e.g., 2). Thus the chronic effects of uranium exposure remain...Anesthesia is induced with ketamine hydrochloride (80 mg/kg) in combination with xylazine hydrochloride (4 mg/kg), given i.p. Fragments are implanted within

  18. Performance of transonic fan stage with weight flow per unit annulus area of 208 kilograms per second per square meter (42.6 (lb/sec)/sq ft)

    NASA Technical Reports Server (NTRS)

    Urasek, D. C.; Kovich, G.; Moore, R. D.

    1973-01-01

    Performance was obtained for a 50-cm-diameter compressor designed for a high weight flow per unit annulus area of 208 (kg/sec)/sq m. Peak efficiency values of 0.83 and 0.79 were obtained for the rotor and stage, respectively. The stall margin for the stage was 23 percent, based on equivalent weight flow and total-pressure ratio at peak efficiency and stall.

  19. Actinides in metallic waste from electrometallurgical treatment of spent nuclear fuel

    NASA Astrophysics Data System (ADS)

    Janney, D. E.; Keiser, D. D.

    2003-09-01

    Argonne National Laboratory has developed a pyroprocessing-based technique for conditioning spent sodium-bonded nuclear-reactor fuel in preparation for long-term disposal. The technique produces a metallic waste form whose nominal composition is stainless steel with 15 wt.% Zr (SS-15Zr), up to ˜ 11 wt.% actinide elements (primarily uranium), and a few percent metallic fission products. Actual and simulated waste forms show similar eutectic microstructures with approximately equal proportions of iron solid solution phases and Fe-Zr intermetallics. This article reports on an analysis of simulated waste forms containing uranium, neptunium, and plutonium.

  20. 75 FR 6627 - Stainless Steel Sheet and Strip in Coils From Mexico; Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-10

    ... between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent... 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent..., manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur...

  1. 78 FR 79667 - Stainless Steel Sheet and Strip in Coils From Japan: Initiation of Expedited Changed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-31

    ... weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0... 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent..., manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur...

  2. 75 FR 81214 - Stainless Steel Sheet and Strip in Coils From Italy: Preliminary Results of the Full Second Five...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-27

    ... between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent... 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent..., manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur...

  3. Single-Trait and Antagonistic Index Selection for Litter Size and Body Weight in Mice

    PubMed Central

    Eisen, E. J.

    1978-01-01

    Individual selection based on female performance only was conducted in four lines of mice: L+ for increased litter size, W+ for increased 6-week body weight, L-W+ for a selection index aimed at decreasing litter size and increasing 6-week body weight and L+W- for a selection index aimed at increasing litter size and decreasing 6-week body weight. A fifth line (K) served as an unselected control. All litters were standardized to eight mice at one day of age. Expected heritability was based on twice the regression of offspring on dam (h2d), which contains additive genetic variance due to direct (σ2Ao) and maternal (σ2Am) effects and their covariance (σAoAm). Responses and correlated responses were measured either deviated (method 1) or not deviated (method 2) from the control line. Realized heritabilities (h2R) for litter size were 0.19 ± 0.04 (1) and 0.16 ± 0.03 (2), which were similar to h 2d of 0.17 ± 0.04. The h2 R for 6-week body weight of 0.55 ± 0.07 (1) and 0.44 ± 0.07 (2) agreed with h2d of 0.42 ± 0.02. Realized genetic correlations (r*GR) between litter size and 6-week body weight calculated from the double-selection experiment were 0.52 ± 0.10 (1) and 0.52 ± 0.13 (2), which were not significantly different from the base population estimate of r* Gd = 0.63 ± 0.14. Divergence (L-W + minus L+W-) in the antagonistic index selection lines was 0.21 ± 0.01 index units (I = 0.305 PW - 0.436 PL, where P W and PL are the phenotypic values for 6-week body weight and litter size, respectively.). The h2 R of index units of 0.14 ± 0.02 calculated from divergence agreed with h2d of 0.14 ± 0.04. Divergences in litter size (-0.19 ± 0.07) and 6-week body weight (0.46 ± 0.10) were in the expected direction. Antagonistic index selection yielded about one-half the expected divergence in litter size, while divergence in 6-week body weight was only slightly less than expected. Realized genetic correlations indicated that litter size, 6-week body weight and index units each showed positive pleiotropy with 3-week body weight, postweaning gain and weight at vaginal introitus and negative pleiotropy with age at vaginal introitus. Sex ratio and several components of fitness (days from joining to parturition, percent fertile matings and percent perinatal survival) did not change significantly in the selected lines. PMID:17248819

  4. Factors contributing to initial weight loss among adolescents with polycystic ovary syndrome.

    PubMed

    Geier, L M; Bekx, M T; Connor, E L

    2012-12-01

    To evaluate the impact of a multidisciplinary clinic on weight management among adolescents with PCOS. 140 adolescent females were evaluated in a multidisciplinary PCOS clinic from March 2005 to December 2008. The team included a pediatric endocrinologist, health psychologist, dietitian, and pediatric gynecologist. 110 were diagnosed with PCOS based on the Rotterdam Criteria. Height, weight, BMI, number of subspecialists seen, use of metformin, and compliance with return visits were obtained from medical records. American Family Children's Hospital in Madison, Wisconsin. 110 adolescent females with polycystic ovary syndrome. Consultation with a dietitian and health psychologist. Change in weight. The average age at first visit was 15.9 years. The average BMI was 34.7 kg/m(2) (range 18.1-55.5). Seventy-six percent had an initial BMI above the 95(th) percentile. Interactions with providers at the initial visit included a pediatric endocrinologist (100%), health psychologist (60.9%), dietitian (75.5%) and gynecologist (70.9%). Seventy one percent returned for a follow-up visit, (average time of 4.5 months between visits) with 57% achieving weight loss (average 3.5 kg) and an additional 12.6% demonstrating no significant weight gain (< 1.5 kg). Thus, 69.6% demonstrated weight loss/stabilization. In this multidisciplinary clinic for adolescents with PCOS, nearly 70% of patients succeeded in short-term weight stabilization, with 57% demonstrating weight loss. Interactions with the health psychologist and dietitian appeared to play a key role in successful weight control, supporting the importance of psychology and nutrition expertise in the management of this disorder. Copyright © 2012 North American Society for Pediatric and Adolescent Gynecology. Published by Elsevier Inc. All rights reserved.

  5. Development of the chemical and electrochemical coal cleaning process

    NASA Astrophysics Data System (ADS)

    Basilio, C. I.; Yoon, Roe-Hoan

    The continuous testing of the Chemical and Electrochemical Coal Cleaning (CECC) was completed successfully using Middle Wyodak and Elkhorn No. 3 coal samples. The CECC unit was run under the optimum conditions established for these coal samples. For the Middle Wyodak coal, the ash content was reduced from 6.96 percent to as low 1.61 percent, corresponding to an ash rejection (by weight) of about 83 percent. The ash and sulfur contents of the Elkhorn No. 3 coal were reduced to as low as 1.8 percent and 0.9 percent. The average ash and sulfur rejections were calculated to be around 84 percent and 47 percent. The CECC continuous unit was used to treat -325 mesh Elkhorn No. 3 coal samples and gave ash and sulfur rejection values of as high as 77 percent and 66 percent. In these test, the clean -325 mesh coal particles were separated from the liberated mineral matter through microbubble column flotation, instead of wet-screening.

  6. Conversion of depleted uranium hexafluoride to a solid uranium compound

    DOEpatents

    Rothman, Alan B.; Graczyk, Donald G.; Essling, Alice M.; Horwitz, E. Philip

    2001-01-01

    A process for converting UF.sub.6 to a solid uranium compound such as UO.sub.2 and CaF. The UF.sub.6 vapor form is contacted with an aqueous solution of NH.sub.4 OH at a pH greater than 7 to precipitate at least some solid uranium values as a solid leaving an aqueous solution containing NH.sub.4 OH and NH.sub.4 F and remaining uranium values. The solid uranium values are separated from the aqueous solution of NH.sub.4 OH and NH.sub.4 F and remaining uranium values which is then diluted with additional water precipitating more uranium values as a solid leaving trace quantities of uranium in a dilute aqueous solution. The dilute aqueous solution is contacted with an ion-exchange resin to remove substantially all the uranium values from the dilute aqueous solution. The dilute solution being contacted with Ca(OH).sub.2 to precipitate CaF.sub.2 leaving dilute NH.sub.4 OH.

  7. The aluminum phosphate zone in the Peace River area, land-pebble phosphate field, Florida

    USGS Publications Warehouse

    Cathcart, James B.

    1953-01-01

    The Peace River area, comprising T. 30 and 31 S., R. 24 and 25 E., contains a thicker and more persistent aluminum phosphate zone, and one that is higher in P2O5 and uranium content than is known elsewhere in the land-pebble phosphate district. This report has been prepared to bring together all of the information on the aluminum phosphate zone in the area where the first plant to treat this material will probably be located. The area may be divided into three physiographic units, (1) the ridge, (2) the flatwoods, and (3) the valley. Maps showing distribution and grade of the aluminum phosphate zone indicate that the zone is thin or absent in the ridge unit, thickest and most persistent, and of the best grade in P2O5 and uranium in the flatwoods unit, and absent or very low in grade in the valley unit. Maps of thickness and of chemical composition show that even in favorable areas there are places where the aluminum phosphate zone is missing or of questionable economic importance. The distribution maps also show that areas of high P2O5 and high uranium content coincide closely. Areas containing thick aluminum phosphate material usually have high uranium and P2O5 contents. It is estimated that an average of 13,000 tons per day of aluminum phosphate material might be mined from this area. This figure is based on the probable amount of time, per year, that mining would be in favorable ground. When all mines in the area are in favorable ground, the tonnage per day might be about 23,000 tons. Tonnages of aluminum phosphate material have been computed for about 36 percent of the area of T. 30 S., R. 25 E., and for 18 percent of the area of T. 31 S., R. 25 E. The total inferred tonnage is about 150,000,000 short tons, with an average grade of 0.012 percent U3O8.

  8. Drop-in substitute for dichlorodifluoromethane refrigerant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Goble, G.H.

    1993-06-01

    A method for producing refrigeration in a refrigeration system designed for a dichlorodifluoromethane refrigerant is described, comprising drop-in substituting for said dichlorodifluoromethane a ternary mixture of about 2 to 20 weight percent isobutane, about 21 to 51 weight percent 1-chloro-1,1-difluoroethane, and about 41 to 71 weight percent chlorodifluoromethane, with the weight percentages of said components being weight percentages of the overall mixture; condensing said ternary mixture; and thereafter evaporating said ternary mixture in the vicinity of a body to be cooled.

  9. 7 CFR 52.1845 - Sizes of seedless raisins.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... percent, by weight, of all the raisins will pass through round perforations 22/64-inch in diameter, but not more than 10 percent, by weight, of all the raisins may pass through round perforations 20/64-inch... will pass through round perforations 24/64-inch in diameter, and not less than 70 percent, by weight...

  10. 7 CFR 52.1845 - Sizes of seedless raisins.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... percent, by weight, of all the raisins will pass through round perforations 22/64-inch in diameter, but not more than 10 percent, by weight, of all the raisins may pass through round perforations 20/64-inch... will pass through round perforations 24/64-inch in diameter, and not less than 70 percent, by weight...

  11. 7 CFR 52.1846 - Grades of seedless raisins.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... more than 18 percent, by weight, of moisture for all varieties of seedless raisins except the Monukka variety, which may contain not more than 19 percent, by weight, of moisture; and that meet the additional...-matured; that contain not more than 18 percent, by weight, of moisture for all varieties of seedless...

  12. 7 CFR 52.1846 - Grades of seedless raisins.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... more than 18 percent, by weight, of moisture for all varieties of seedless raisins except the Monukka variety, which may contain not more than 19 percent, by weight, of moisture; and that meet the additional...-matured; that contain not more than 18 percent, by weight, of moisture for all varieties of seedless...

  13. 12 CFR 324.37 - Collateralized transactions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... institution may assign a zero percent risk weight to an exposure to an OTC derivative contract that is marked... exposure to a sovereign that qualifies for a zero percent risk weight under § 324.32. (iii) An FDIC-supervised institution may assign a zero percent risk weight to the collateralized portion of an exposure...

  14. A preliminary report on the rapid fluorimetric determination of uranium in low-grade ores

    USGS Publications Warehouse

    Grimaldi, F.S.; Levine, Harry

    1950-01-01

    A simple and very rapid fluorimetric procedure is described for the determination of uranium in low-grade shale and phosphate ores. The best working range is from 0.001 to about 0.04 percent U. The procedure employs batch extraction of uranium nitrate by ethyl acetate, using aluminum nitrate as the salting agent, prior to the visual fluorimetric estimation. The procedure is especially designed to save reagents; only 9.5 g of aluminum nitrate and 10 ml of ethyl acetate being used for one analysis. The solution of the sample by means of a fusion with NaOH-NaNO3 flux is rapid. After fusion the sample is immediately extracted without removing silica and other hydrolytic precipitates. Aluminum nitrate very effectively ties up fluoride and phosphate, thus eliminating steps required for their removal.

  15. Design of a large span-distributed load flying-wing cargo airplane with laminar flow control

    NASA Technical Reports Server (NTRS)

    Lovell, W. A.; Price, J. E.; Quartero, C. B.; Turriziani, R. V.; Washburn, G. F.

    1978-01-01

    A design study was conducted to add laminar flow control to a previously design span-distributed load airplane while maintaining constant range and payload. With laminar flow control applied to 100 percent of the wing and vertical tail chords, the empty weight increased by 4.2 percent, the drag decreased by 27.4 percent, the required engine thrust decreased by 14.8 percent, and the fuel consumption decreased by 21.8 percent. When laminar flow control was applied to a lesser extent of the chord (approximately 80 percent), the empty weight increased by 3.4 percent, the drag decreased by 20.0 percent, the required engine thrust decreased by 13.0 percent, and the fuel consumption decreased by 16.2 percent. In both cases the required take-off gross weight of the aircraft was less than the original turbulent aircraft.

  16. Precambrian uranium-bearing quartz-pebble conglomerates: exploration model and United States resource potential

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Houston, R.S.; Karlstrom, K.E.

    1979-11-01

    Uranium has been discovered in fluvial quartz-pebble conglomerates in most of the Precambrian shield areas of the world, including the Canadian, African, South American, Indian, Baltic, and Australian shields. Occurrences in these and other areas are shown. Two of these occurrences, the Huronian supergroup of Canada and the Witwatersrand deposit of South Africa contain 20 to 30 percent of the planet's known uranium reserves. Thus it is critical that we understand the origin of these deposits and develop exploration models that can aid in finding new deposits. Inasmuch as these uranium-bearing conglomerates are confined almost entirely to rocks of Precambrianmore » age, Part I of this review begins with a discussion of Precambrian geology as it applies to the conglomerates. This is followed by a discussion of genetic concepts, a discussion of unresolved problems, and finally a suggested exploration model. Part II summarizes known and potential occurrences of Precambrian fossil placers in the world and evaluates them in terms of the suggested exploration model. Part III discusses the potential for important Precambrian fossil-placer uranium deposits in the United States and includes suggestions that may be helpful in establishing an exploration program in this country. Part III also brings together new (1975-1978) data on uranium occurrences in the Precambrian of the Wyoming Province. Part IV is a complete bibliography of Precambrian fossil placers, divided according to geographical areas. In total, this paper is designed to be a comprehensive review of Precambrian uranium-bearing fossil placers which will be of use to uranium explorationists and to students of Precambrian geology.« less

  17. Investigation of Plutonium and Uranium Precipitation Behavior with Gadolinium as a Neutron Poison

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Visser, A.E.

    2003-10-17

    The caustic precipitation of plutonium (Pu)-containing solutions has been investigated to determine whether the presence of 3:1 uranium (U):Pu in solutions stored in the H-Canyon Facility at the U.S. Department of Energy's (DOE) Savannah River Site (SRS) would adversely impact the use of gadolinium nitrate (Gd(NO3)3) as a neutron poison. In the past, this disposition strategy has been successfully used to discard solutions containing approximately 100 kg of Pu to the SRS high level waste (HLW) system. In the current experiments, gadolinium (as Gd(NO3)3) was added to samples of a 3:1 U:Pu solution, a surrogate 3 g/L U solution, andmore » a surrogate 3 g/L U with 1 g/L Pu solution. A series of experiments was then performed to observe and characterize the precipitate at selected pH values. Solids formed at pH 4.5 and were found to contain at least 50 percent of the U and 94 percent of the Pu, but only 6 percent of the Gd. As the pH of the solution increased (e.g., pH greater than 14 with 1.2 or 3.6 M sodium hydroxide (NaOH) excess), the precipitate contained greater than 99 percent of the Pu, U, and Gd. After the pH greater than 14 systems were undisturbed for one week, no significant changes were found in the composition of the solid or supernate for each sample. The solids were characterized by X-ray diffraction (XRD) which found sodium diuranate (Na2U2O7) and gadolinium hydroxide (Gd(OH)3) at pH 14. Thermal gravimetric analysis (TGA) indicated sufficient water molecules were present in the solids to thermalize the neutrons, a requirement for the use of Gd as a neutron poison. Scanning electron microscopy (SEM) was also performed and the accompanying back-scattering electron analysis (BSE) found Pu, U, and Gd compounds in all pH greater than 14 precipitate samples. The rheological properties of the slurries at pH greater than 14 were also investigated by performing precipitate settling rate studies and measuring the viscosity and density of the materials. Based on the results of these experiments, poisoning the Pu-U solutions with Gd and subsequent neutralization is a viable process for discarding the Pu to the SRS HLW system.« less

  18. Orbital Payload Reductions Resulting from Booster and Trajectory Modifications for Recovery of a Large Rocket Booster

    NASA Technical Reports Server (NTRS)

    Levin, Alan D.; Hopkins, Edward J.

    1961-01-01

    An analysis was made to determine the reduction in payload for a 300 nautical mile orbit resulting from the addition of inert weight, representing recovery gear, to the first-stage booster of a three-stage rocket vehicle. The values of added inert weight investigated ranged from 0 to 18 percent of gross weight at lift off. The study also included the effects on the payload in orbit and the distance from the launch site at burnout and at impact caused by variation in the vertical rise time before the programmed tilt. The vertical rise times investigated ranged from 16-7 to 100 percent of booster burning time. For a vertical rise of 16.7 percent of booster burning time it was found that a 50-percent increase in the weight of the empty booster resulted in only a 10-percent reduction of the payload in orbit. For no added booster weight, increasing vertical rise time from 16-7 to 100 percent of booster burning time (so that the spent booster would impact in the launch area) reduced the payload by 37 percent. Increasing the vertical rise time from 16-7 to 50 percent of booster burning time resulted in about a 15-percent reduction in the impact distance, and for vertical rise times greater than 50-percent the impact distance decreased rapidly.

  19. 75 FR 62104 - Certain Stainless Steel Sheet and Strip in Coils From Germany, Japan, the Republic of Korea, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-07

    ... also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent..., chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0... percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel...

  20. 75 FR 81221 - Stainless Steel Sheet and Strip in Coils From Mexico; Preliminary Results of the Five-Year...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-27

    ... also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent..., chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0... percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel...

  1. 76 FR 25670 - Stainless Steel Sheet and Strip in Coils From Italy: Final Results of the Full Five-Year (“Sunset...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-05

    ... weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0... 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent..., manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur...

  2. Uranium in sediments, mussels (Mytilus sp.) and seawater of the Krka river estuary.

    PubMed

    Cuculić, Vlado; Cukrov, Neven; Barisić, Delko; Mlakar, Marina

    2006-01-01

    The response of an aquatic environment to the decrease of phosphate discharges from a technologically improved transhipment terminal, situated at the Croatian Adriatic coast in the port of Sibenik, has been assessed based on uranium activity and concentration in sediment, seawater and mussels Mytilus sp. The highest 238U activities (485+/-16Bqkg(-1) dry weight) were found in the sediment sample collected from the sampling site closest to the terminal. The maximum concentrations in the sediment samples are above the natural ranges and clearly indicate the harbour activities' influence. The 238U/226Ra activity ratios in sediment samples demonstrate the decreasing trend of phosphate ore input. Mussel samples showed levels of 238U activities in the range from 12.1+/-2.9 to 19.4+/-7.2 Bqkg(-1) dry weight, thus being slightly higher than in normally consumed mussels. Only the seawater, taken just above the bottom sediment at the sampling site closest to the terminal, shows a slightly higher uranium concentration (3.1+/-0.2 microgL(-1)) when compared to the samples taken in upper seawater layers (2.1+/-0.2 microgL(-1)) but is in the range of the concentration level of uranium in natural seawater. Since the transhipment terminal in the port of Sibenik was modernised in 1988, discharge of phosphate ore into the seawater was drastically reduced and, consequently, uranium concentration levels in seawater have decreased. However, enhanced uranium activity levels are still found in deeper sediment layer samples and in mussel.

  3. Resumption of menses in anorexia nervosa during a course of family-based treatment

    PubMed Central

    2013-01-01

    Background The resumption of menses (ROM) is considered an important clinical marker in weight restoration for patients with anorexia nervosa (AN). The purpose of this study was to examine ROM in relation to expected body weight (EBW) and psychosocial markers in adolescents with AN. Methods We conducted a retrospective chart review at The University of Chicago Eating Disorders Program from September 2001 to September 2011 (N = 225 females with AN). Eighty-four adolescents (Mean age = 15.1, SD = 2.2) with a DSM-IV diagnosis of AN, presenting with secondary amenorrhea were identified. All participants had received a course of outpatient family-based treatment (FBT), i.e., ~20 sessions over 12 months. Weight and menstrual status were tracked at each therapy session throughout treatment. The primary outcome measures were weight (percent of expected for sex, age and height), and ROM. Results Mean percent EBW at baseline was 82.0 (SD = 6.5). ROM was reported by 67.9% of participants (57/84), on average at 94.9 (SD = 9.3) percent EBW, and after having completed an average of 13.5 (SD = 10.7) FBT sessions (~70% of standard FBT). Compared to participants without ROM by treatment completion, those with ROM had significantly higher baseline Eating Disorder Examination Global scores (p = .004) as well as Shape Concern (p < .008) and Restraint (p < .002) subscale scores. No other differences were found. Conclusions Results suggest that ROM occur at weights close to the reference norms for percent EBW, and that high pre-treatment eating disorder psychopathology is associated with ROM. Future research will be important to better understand these differences and their implications for the treatment of adolescents with AN. PMID:24926411

  4. Arsenic and uranium in private wells in Connecticut, 2013-15

    USGS Publications Warehouse

    Flanagan, Sarah M.; Brown, Craig J.

    2017-05-03

    The occurrence of arsenic and uranium in groundwater at concentrations that exceed drinking-water standards is a concern because of the potential adverse effects on human health. Some early studies of arsenic occurrence in groundwater considered anthropogenic causes, but more recent studies have focused on sources of naturally occurring arsenic to groundwater, such as minerals within aquifer materials that are in contact with groundwater. Arsenic and uranium in groundwater in New England have been shown to have a strong association to the geologic setting and nearby streambed sediment concentrations. In New Hampshire and Massachusetts, arsenic and uranium concentrations greater than human-health benchmarks have shown distinct spatial patterns when related to the bedrock units mapped at the local scale.The Connecticut Department of Public Health (DPH) reported that there are about 322,600 private wells in Connecticut serving approximately 823,000 people, or 23 percent of the State’s population. The State does not require that existing private wells be routinely tested for arsenic, uranium, or other contaminants; consequently, private wells are only sampled at the well owner’s discretion or when they are newly constructed. The U.S. Geological Survey (USGS), in cooperation with the DPH, completed an assessment in 2016 on the distribution of concentrations of arsenic and uranium in groundwater from bedrock in Connecticut. This report presents the major findings for arsenic and uranium concentrations from water samples collected from 2013 to 2015 from private wells.

  5. Evaluation of a noninvasive, dual-wavelength laser-suction and massage device for the regional treatment of cellulite.

    PubMed

    Kulick, Michael I

    2010-06-01

    Cellulite is a condition usually limited to women. The most common location for this surface irregularity is the thigh. Evaluation of treatment efficacy is difficult because of the reliance on patient satisfaction surveys and flash photography, which can "flatten" surface texture. Reproducibility of photographs is also difficult, as subtle changes in body position can affect appearance. Twenty women with mild to moderate cellulite of their lateral thighs were enrolled. Pretreatment and posttreatment assessment included patient weight, body mass index, percentage body fat, standard digital photographs, VECTRA three-dimensional images, and patient questionnaire. Patients received two treatments per week for 4 weeks. Treatment time was 15 minutes per thigh using the SmoothShapes device. Patients were evaluated 1, 3, and 6 months after their last treatment. To be considered improved after treatment, both thighs needed clear improvement in contour as determined by the "untextured" images obtained with the VECTRA camera system. This device depicts skin contour independent of incident lighting. There were no complications. Seventeen patients had complete data for analysis. Ninety-four percent of the patients felt their cellulite was improved. VECTRA analysis showed 82 percent improvement at 1 month, 76 percent improvement at 3 months, and 76 percent improvement at 6 months. Initial cellulite irregularities and improvement were more difficult to discern using standard digital photographs. There was an average increase in patient weight, body mass index, and percentage body fat at 6 months. The SmoothShapes device provided improvement in surface contour (cellulite) 6 months after the last treatment in the majority of the patients based on patient survey and VECTRA analysis.

  6. Three percent weight reduction is the minimum requirement to improve health hazards in obese and overweight people in Japan.

    PubMed

    Muramoto, Akiko; Matsushita, Madoka; Kato, Ayako; Yamamoto, Naoki; Koike, George; Nakamura, Masakazu; Numata, Takeyuki; Tamakoshi, Akiko; Tsushita, Kazuyo

    2014-01-01

    Adequate goal-setting is important in health counselling and treatment for obesity and overweight. We tried to determine the minimum weight reduction required for improvement of obesity-related risk factors and conditions in obese and overweight Japanese people, using a nationwide intervention programme database. Japanese men and women (n=3480; mean age±standard deviation [SD], 48.3±5.9 years; mean body mass index±SD, 27.7±2.5kgm(-2)) with "Obesity Disease" or "Metabolic Syndrome" participated in a 6-month lifestyle modification programme (specific health guidance) and underwent follow-up for 6 months thereafter. The relationship between percent weight reduction and changes in 11 parameters of obesity-related diseases were examined. Significant weight reduction was observed 6 months after the beginning of the programme, and it was maintained for 1 year. Concomitant improvements in parameters for obesity-related diseases were also observed. One-third of the subjects reduced their body weight by ≥3%. In the group exhibiting 1% to <3% weight reduction, plasma triglycerides (TG), low-density lipoprotein cholesterol (LDL-C), haemoglobin A1c (HbA1c), aspartate aminotransferase (AST), alanine aminotransferase (ALT) and γ-glutamyl transpeptidase (γ-GTP) decreased significantly, and high-density lipoprotein cholesterol (HDL-C) increased significantly compared to the control group (±1% weight change group). In addition to the improvements of these 7 parameters (out of 11), significant reductions in systolic blood pressure (SBP), diastolic blood pressure (DBP), fasting plasma glucose (FPG) and uric acid (UA) (total 11 of 11 parameters) were observed in the group with 3% to <5% weight reduction. In the group with ≥5% weight reduction, the same 11 parameters also improved as those in the group with 3% to <5% weight reduction. The 6-month lifestyle modification programme induced significant weight reduction and significant improvement of parameters of obesity-related diseases. All the measured obesity-related parameters were significantly improved in groups with 3% to <5% and ≥5% weight reduction. Based on these findings, the minimum weight reduction required for improvement of obesity-related risk factors or conditions is 3% in obese and overweight (by WHO classification) Japanese people. Copyright © 2013 Asian Oceanian Association for the Study of Obesity. Published by Elsevier Ltd. All rights reserved.

  7. Status of groundwater quality in the Coastal Los Angeles Basin, 2006-California GAMA Priority Basin Project

    USGS Publications Warehouse

    Goldrath, Dara; Fram, Miranda S.; Land, Michael; Belitz, Kenneth

    2012-01-01

    Groundwater quality in the approximately 860-square-mile (2,227-square-kilometer) Coastal Los Angeles Basin study unit (CLAB) was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study area is located in southern California in Los Angeles and Orange Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA CLAB study was designed to provide a spatially unbiased assessment of the quality of untreated (raw) groundwater in the primary aquifer system. The assessment is based on water-quality and ancillary data collected in 2006 by the USGS from 69 wells and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer system was defined by the depth interval of the wells listed in the CDPH database for the CLAB study unit. The quality of groundwater in the primary aquifer system may be different from that in the shallower or deeper water-bearing zones; shallow groundwater may be more vulnerable to surficial contamination. This study assesses the status of the current quality of the groundwater resource by using data from samples analyzed for volatile organic compounds (VOCs), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. This status assessment is intended to characterize the quality of groundwater resources in the primary aquifer system of the CLAB study unit, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal and (or) California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration greater than (>) 1.0 indicates a concentration greater than a benchmark, and a relative-concentration less than or equal to (≤) 1.0 indicates a concentration equal to or less than a benchmark. Relative-concentrations of organic and special-interest constituents [perchlorate, N-nitrosodimethylamine (NDMA), 1,2,3-trichloropropane (1,2,3-TCP), and 1,4-dioxane] were classified as "high" (relative-concentration>1.0), "moderate" (0.5status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the area of the primary aquifer system with a relative-concentration greater than 1.0 for a particular constituent or class of constituents; percentage is based on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifer system with moderate and low relative-concentrations, respectively. Two statistical approaches-grid-based and spatially weighted-were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable in the CLAB study unit (within 90-percent confidence intervals). Inorganic constituents with human-health benchmarks were detected at high relative-concentrations in 5.6 percent of the primary aquifer system and moderate in 26 percent. High aquifer-scale proportion of inorganic constituents primarily reflected high aquifer-scale proportions of arsenic (1.9 percent), nitrate (1.9 percent), and uranium (1.2 percent). Inorganic constituents with secondary maximum contaminant levels (SMCL) were detected at high relative-concentrations in 18 percent of the primary aquifer system and moderate in 47 percent. The constituents present at high relative-concentrations included total dissolved solids (1.9 percent), manganese (15 percent), and iron (9.4 percent). Relative-concentrations of organic constituents (one or more) were high in 3.7 percent, and moderate in 13 percent, of the primary aquifer system. The high aquifer-scale proportion of organic constituents primarily reflected high aquifer-scale proportions of solvents, including trichloroethene (TCE; 1.7 percent), perchloroethene (PCE; 1.1 percent), and carbon tetrachloride (1.0 percent). Of the 204 organic constituents analyzed, 44 constituents were detected. Eleven organic constituents had detection frequencies of greater than 10 percent: the trihalomethanes chloroform and bromodichloromethane, the solvents TCE, PCE, cis-1,2-dichloroethene, and 1,1-dichloroethene, the herbicides atrazine, simazine, prometon, and tebuthiuron, and the gasoline additive methyl tert-butyl ether (MTBE). Most detections were at low relative-concentrations. The special-interest constituent perchlorate was detected at high relative-concentrations in 0.5 percent of the primary aquifer system, and at moderate relative-concentrations in 35 percent. The special-interest constituent 1,4-dioxane was detected at high relative-concentrations, but an insufficient number of samples was analyzed to provide a representative estimate of aquifer-scale proportion.

  8. Using Mid-Upper Arm Circumference to End Treatment of Severe Acute Malnutrition Leads to Higher Weight Gains in the Most Malnourished Children

    PubMed Central

    Dale, Nancy M.; Myatt, Mark; Prudhon, Claudine; Briend, André

    2013-01-01

    Objective The World Health Organization recommends discharging children admitted to nutrition programs treating severe acute malnutrition, with a low mid-upper arm circumference (MUAC <115 mm) when weight gain is >15%. When this recommendation is followed, the most severely malnourished children receive a shorter treatment compared to children that are less severely malnourished. This study assesses whether using MUAC >125 mm as discharge criteria eliminates this effect. Methods and Findings Data from 753 children cured from a Médecins Sans Frontières outpatient nutrition program in Gedaref, North Sudan were analyzed. MUAC >125 mm was used as discharge criteria. Length of stay and percent weight gain of children were compared in relation to nutritional status on admission. Children with low MUAC on admission had a longer duration of treatment (p = 0.000) and also a higher percent weight gain (p = 0.000) than children with higher MUAC. Similar results with weight-for-height z-scores categories were shown with both duration of treatment (p = 0.000) and percent weight gain (p = 0.000). Conclusion This study shows that using MUAC as the discharge criteria eliminates the effect of shorter treatment in most severely malnourished children compared to least severely malnourished, as is observed with percent weight gain. The findings directly address the main concern that has been identified with the current WHO recommendation of using percent weight gain. MUAC could be used as discharge criteria, instead of percent weight gain, as having a longer duration of treatment and a higher percent weight gain for the most malnourished is highly desirable. PMID:23418442

  9. Status of groundwater quality in the California Desert Region, 2006-2008: California GAMA Priority Basin Project

    USGS Publications Warehouse

    Dawson, Barbara J. Milby; Belitz, Kenneth

    2012-01-01

    Groundwater quality in six areas in the California Desert Region (Owens, Antelope, Mojave, Coachella, Colorado River, and Indian Wells) was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The six Desert studies were designed to provide a spatially unbiased assessment of the quality of untreated groundwater in parts of the Desert and the Basin and Range hydrogeologic provinces, as well as a statistically consistent basis for comparing groundwater quality to other areas in California and across the Nation. Samples were collected by the USGS from September 2006 through April 2008 from 253 wells in Imperial, Inyo, Kern, Los Angeles, Mono, Riverside, and San Bernardino Counties. Two-hundred wells were selected using a spatially distributed, randomized grid-based method to provide a spatially unbiased representation of the study areas (grid wells), and fifty-three wells were sampled to provide additional insight into groundwater conditions (additional wells). The status of the current quality of the groundwater resource was assessed based on data from samples analyzed for volatile organic compounds (VOCs), pesticides, and inorganic constituents such as major ions and trace elements. Water-quality data from the California Department of Public Health (CDPH) database also were incorporated in the assessment. The status assessment is intended to characterize the quality of untreated groundwater resources within the primary aquifer systems of the Desert Region, not the treated drinking water delivered to consumers by water purveyors. The primary aquifer systems (hereinafter, primary aquifers) in the six Desert areas are defined as that part of the aquifer corresponding to the perforation intervals of wells listed in the CDPH database. Relative-concentrations (sample concentration divided by the benchmark concentration) were used as the primary metric for evaluating groundwater quality for those constituents that have Federal and (or) California benchmarks. A relative-concentration (RC) greater than (>) 1.0 indicates a concentration above a benchmark, and an RC less than or equal to (≤) 1.0 indicates a concentration equal to or below a benchmark. Organic and special-interest constituent RCs were classified as “low” (RC ≤ 0.1), “moderate” (0.1 1.0). Inorganic constituent RCs were classified as “low” (RC ≤ 0.5), “moderate” (0.5 1.0). A lower threshold value RC was used to distinguish between low and moderate RCs for organic constituents because these constituents are generally less prevalent and have smaller RCs than inorganic constituents. Aquifer-scale proportion was used as the primary metric for evaluating regional-scale groundwater quality. High aquifer-scale proportion was defined as the percentage of the area of the primary aquifers with an RC greater than 1.0 for a particular constituent or class of constituents; percentage is based on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifers with moderate and low RCs, respectively. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable in the Desert Region (within 90 percent confidence intervals). The status assessment determined that one or more inorganic constituents with health-based benchmarks had high RCs in 35.4 percent of the Desert Region’s primary aquifers, moderate RCs in 27.4 percent, and low RCs in 37.2 percent. The inorganic constituents with health-based benchmarks having the largest high aquifer-scale proportions were arsenic (17.8 percent), boron (11.4 percent), fluoride (8.9 percent), gross-alpha radioactivity (6.6 percent), molybdenum (5.7 percent), strontium (3.7 percent), vanadium (3.6 percent), uranium (3.2 percent), and perchlorate (2.4 percent). Inorganic constituents with non-health-based benchmarks were also detected at high RCs in 18.6 percent and at moderate RCs in 16.0 percent of the Desert Region’s primary aquifers. In contrast, organic constituents had high RCs in only 0.3 percent of the Desert Region’s primary aquifers, moderate in 2.0 percent, low in 48.0 percent, and were not detected in 49.7 percent of the primary aquifers in the Desert Region. Of 149 organic constituents analyzed for all six study areas, 42 constituents were detected. Six organic constituents, carbon tetrachloride, chloroform, 1,2-dichloropropane, dieldrin, 1,2-dichloroethane, and tetrachloroethene, were found at moderate RCs in one or more of the grid wells. One constituent, N-nitrosodimethylamine, a special-interest VOC, was detected at a high RC in one well. Thirty-nine organic constituents were detected only at low concentrations. Three organic constituents were frequently detected (in more than 10 percent of samples from grid wells): chloroform, simazine, and deethylatrazine.

  10. Geology, geochemistry, and geophysics of the Fry Canyon uranium/copper project site, southeastern Utah - Indications of contaminant migration

    USGS Publications Warehouse

    Otton, James K.; Zielinski, Robert A.; Horton, Robert J.

    2010-01-01

    The Fry Canyon uranium/copper project site in San Juan County, southeastern Utah, was affected by the historical (1957-68) processing of uranium and copper-uranium ores. Relict uranium tailings and related ponds, and a large copper heap-leach pile at the site represent point sources of uranium and copper to local soils, surface water, and groundwater. This study was designed to establish the nature, extent, and pathways of contaminant dispersion. The methods used in this study are applicable at other sites of uranium mining, milling, or processing. The uranium tailings and associated ponds sit on a bench that is as much as 4.25 meters above the level of the adjacent modern channel of Fry Creek. The copper heap leach pile sits on bedrock just south of this bench. Contaminated groundwater from the ponds and other nearby sites moves downvalley and enters the modern alluvium of adjacent Fry Creek, its surface water, and also a broader, deeper paleochannel that underlies the modern creek channel and adjacent benches and stream terraces. The northern extent of contaminated groundwater is uncertain from geochemical data beyond an area of monitoring wells about 300 meters north of the site. Contaminated surface water extends to the State highway bridge. Some uranium-contaminated groundwater may also enter underlying bedrock of the Permian Cedar Mesa Sandstone along fracture zones. Four dc-resistivity surveys perpendicular to the valley trend were run across the channel and its adjacent stream terraces north of the heap-leach pile and ponds. Two surveys were done in a small field of monitoring wells and two in areas untested by borings to the north of the well field. Bedrock intercepts, salt distribution, and lithologic information from the wells and surface observations in the well field aided interpretation of the geophysical profiles there and allowed interpretation of the two profiles not tested by wells. The geophysical data for the two profiles to the north of the well field suggest that the paleochannel persists at least 900 m to the north of the heap leach and pond sites. Contamination of groundwater beneath the stream terraces may extend at least that far. Fry Creek surface water (six samples), seeps and springs (six samples), and wells (eight samples) were collected during a dry period of April 16-19, 2007. The most uranium-rich (18.7 milligrams per liter) well water on the site displays distinctive Ca-Mg-SO4-dominant chemistry indicating the legacy of heap leaching copper-uranium ores with sulfuric acid. This same water has strongly negative d34S of sulfate (-13.3 per mil) compared to most local waters of -2.4 to -5.4 per mil. Dissolved uranium species in all sampled waters are dominantly U(VI)-carbonate complexes. All waters are undersaturated with respect to U(VI) minerals. The average 234U/238U activity ratio (AR) in four well waters from the site (0.939 + or ? 0.011) is different from that of seven upstream waters (1.235 + or ? 0.069). This isotopic contrast permits quantitative estimates of mixing of site-derived uranium with natural uranium in waters collected downstream. At the time of sampling, uranium in downstream surface water was mostly (about 67 percent) site-derived and subject to further concentration by evaporation. Three monitoring wells located approximately 0.4 kilometer downstream contained dominantly (78-87 percent) site-derived uranium. Distinctive particles of chalcopyrite (CuFeS) and variably weathered pyrite (FeS2) are present in tailings at the stream edge on the site and are identified in stream sediments 1.3 kilometers downstream, based on inspection of polished grain mounts of magnetic mineral separates.

  11. Weight and Veterans' Environments Study (WAVES) I and II: Rationale, Methods, and Cohort Characteristics.

    PubMed

    Zenk, Shannon N; Tarlov, Elizabeth; Powell, Lisa M; Wing, Coady; Matthews, Stephen A; Slater, Sandy; Gordon, Howard S; Berbaum, Michael; Fitzgibbon, Marian L

    2018-03-01

    To present the rationale, methods, and cohort characteristics for 2 complementary "big data" studies of residential environment contributions to body weight, metabolic risk, and weight management program participation and effectiveness. Retrospective cohort. Continental United States. A total of 3 261 115 veterans who received Department of Veterans Affairs (VA) health care in 2009 to 2014, including 169 910 weight management program participants and a propensity score-derived comparison group. The VA MOVE! weight management program, an evidence-based lifestyle intervention. Body mass index, metabolic risk measures, and MOVE! participation; residential environmental attributes (eg, food outlet availability and walkability); and MOVE! program characteristics. Descriptive statistics presented on cohort characteristics and environments where they live. Forty-four percent of men and 42.8% of women were obese, whereas 4.9% of men and 9.9% of women engaged in MOVE!. About half of the cohort had at least 1 supermarket within 1 mile of their home, whereas they averaged close to 4 convenience stores (3.6 for men, 3.9 for women) and 8 fast-food restaurants (7.9 for men, 8.2 for women). Forty-one percent of men and 38.6% of women did not have a park, and 35.5% of men and 31.3% of women did not have a commercial fitness facility within 1 mile. Drawing on a large nationwide cohort residing in diverse environments, these studies are poised to significantly inform policy and weight management program design.

  12. A Prospective Examination of Weight Gain in Hospitalized Adolescents With Anorexia Nervosa on a Recommended Refeeding Protocol

    PubMed Central

    Garber, Andrea K.; Michihata, Nobuaki; Hetnal, Katherine; Shafer, Mary-Ann; Moscicki, Anna-Barbara

    2015-01-01

    Purpose Current refeeding recommendations for adolescents hospitalized with anorexia nervosa (AN) are conservative, starting with low calories and advancing slowly to avoid refeeding syndrome. The purpose of this study was to examine weight change and clinical outcomes in hospitalized adolescents with AN on a recommended refeeding protocol. Methods Adolescents aged 13.1–20.5 years were followed during hospitalization for AN. Weight, vital signs, electrolytes, and 24-hour fluid balance were measured daily. Percent median body mass index (%MBMI) was calculated as 50th percentile BMI for age and gender. Calories were prescribed on admission and were increased every other day. Results Thirty-five subjects with a mean (SD) age of 16.2 (1.9) years participated over 16.7 (6.4) days. Calories increased from 1,205 (289) to 2,668 (387). No subjects had refeeding syndrome; 20% had low serum phosphorus. Percent MBMI increased from 80.1 (11.5) to 84.5 (9.6); overall gain was 2.10 (1.98) kg. However, 83% of subjects initially lost weight. Mean %MBMI did not increase significantly until day 8. Higher calories prescribed at baseline were significantly associated with faster weight gain (p = .003) and shorter hospital stay (p = .030) in multivariate regression models adjusted for %MBMI and lowest heart rate on admission. Conclusions Hospitalized adolescents with AN demonstrated initial weight loss and slow weight gain on a recommended refeeding protocol. Higher calorie diets instituted at admission predicted faster weight gain and shorter hospital stay. These findings support the development of more aggressive feeding strategies in adolescents hospitalized with AN. Further research is needed to identify caloric and supplementation regimens to maximize weight gain safely while avoiding refeeding syndrome. PMID:22188830

  13. Decreased plasma levels of ceruloplasmin after diet-induced weight loss in obese women.

    PubMed

    Tajik, N; Golpaie, A; Keshavarz, S A; Djalali, M; Sehat, M; Masoudkabir, F; Ahmadivand, Z; Fatehi, F; Zare, M; Yazdani, T

    2012-06-01

    Plasma ceruloplasmin (Cp) has been shown to be a risk factor for cardiovascular disease and also to be associated with obesity. However, it is not known whether weight loss could decrease the plasma Cp levels. To investigate the effect of diet-induced weight loss on plasma Cp in obese women. Sixty-seven healthy obese women [age =33.4±8.7 yr, body mass index (BMI) =36.0±4.8 kg/m2] were entered into a medically supervised program aimed at reducing body weight by 10% or more. Weight loss was achieved through a diet providing a daily energy deficit of 500-1000 kcal/day. In addition, all patients were prescribed to use 50 g of a fiber supplement per day. For all subjects, assessment of dietary intake, anthropometric indices, and plasma levels of C-reactive protein and Cp was performed at the first visit and repeated at 12th week of follow-up. By completing the program, weight (Δ=-9.5%, p<0.0001), BMI (Δ=-9.7%, p<0.0001), waist-circumference (Δ=-6.1%, p<0.0001), and triceps skinfold thickness (Δ=-14.9%, p<0.0001) significantly decreased. Plasma Cp significantly decreased after 12 weeks of dietary intervention (33.6±5.6 mg/dl vs 25.2±5.8 mg/dl, p<0.0001). Percent change in Cp was correlated with percent change in waist-circumference (r=446, p=0.015). Our study suggests that an improved body composition induced by restriction of energy intake is associated with decreased serum concentrations of Cp in obese women which in turn might have reduced the subjects' risk of developing cardiovascular disease.

  14. 14 CFR 23.65 - Climb: All engines operating.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...-powered airplane of 6,000 pounds or less maximum weight must have a steady climb gradient at sea level of... gradient of climb after takeoff of at least 4 percent with (1) Take off power on each engine; (2) The...

  15. 21 CFR 74.3206 - D&C Green No. 6.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false D&C Green No. 6. 74.3206 Section 74.3206 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR... level (i) Not to exceed 0.03 percent by weight of the lens material for coloring contact lenses; (ii...

  16. 21 CFR 74.3206 - D&C Green No. 6.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 1 2011-04-01 2011-04-01 false D&C Green No. 6. 74.3206 Section 74.3206 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR... level (i) Not to exceed 0.03 percent by weight of the lens material for coloring contact lenses; (ii...

  17. Fuel weight and removal costs in fuel-break construction

    Treesearch

    James L. Murphy

    1966-01-01

    Three major fuel types were sampled during fuel-break construction on the west side of the Sierra Nevada, California. Fuel weight per acre ranged from 12.2. to 420.6 tons per acre on average. Fuel-break construction removed 27.9 to 40.5 percent of teh total fuel; costs ranged from $141.29 to $148.38 per acre and $1.16 to $4.43 per ton.

  18. 46 CFR 71.25-20 - Fire-detecting and extinguishing equipment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... weight loss exceed 10 percent of weight of charge. Inspect hose and nozzle to be sure they are clear.1... cylinders. Recharge if weight loss exceeds 10 percent of weight of charge.1 1 Cylinders must be tested and...

  19. Neonatal anthropometrics and body composition in obese children investigated by dual energy X-ray absorptiometry.

    PubMed

    Lausten-Thomsen, Ulrik; Nielsen, Tenna Ruest Haarmark; Thagaard, Ida Näslund; Larsen, Torben; Holm, Jens-Christian

    2014-05-01

    Epidemiological and animal studies have suggested an effect of the intrauterine milieu upon the development of childhood obesity. This study investigates the relationship between body composition measured by dual energy X-ray absorptiometry expressed as body fat percent, body fat mass index (BFMI), and fat free mass index (FFMI) in obese children and the preceding in utero conditions expressed by birth weight, birth length, and birth weight for gestational age. The study cohort consisted of 776 obese Danish children (median age 11.6 years, range 3.6-17.9) with a mean Body Mass Index Standard Deviation Score (BMI SDS) of 2.86 (range 1.64-5.48) treated in our national referral centre. In a linear general regression model adjusted for age, gender, socioeconomic status, and duration of breastfeeding, we found the body fat percent, FFMI, and BFMI at the time of enrolment in childhood obesity treatment to be significantly correlated with both birth weight and birth weight for gestational age. These results indicate a prenatal influence upon childhood obesity. Although there are currently no sufficient data to suggest any recommendations to pregnant women, it is possible that the prenatal period may be considered as a potential window of opportunity for prevention of childhood overweight and obesity.

  20. Validation of bioelectrical impedance analysis to hydrostatic weighing in male body builders.

    PubMed

    Volpe, Stella Lucia; Melanson, Edward L; Kline, Gregory

    2010-03-01

    The purpose of this study was to compare bioelectrical impedance analysis (BIA) to hydrostatic weighing (HW) in male weight lifters and body builders. Twenty-two male body builders and weight lifters, 23 +/- 3 years of age (mean +/- SD), were studied to determine the efficacy of BIA to HW in this population. Subjects were measured on two separate occasions, 6 weeks apart, for test-retest reliability purposes. Participants recorded 3-day dietary intakes and average work-out times and regimens between the two testing periods. Subjects were, on average, 75 +/- 8 kg of body weight and 175 +/- 7 cm tall. Validation results were as follows: constant error for HW-BIA = 0.128 +/- 3.7%, r for HW versus BIA = -0.294. Standard error of the estimate for BIA = 2.32% and the total error for BIA = 3.6%. Percent body fat was 7.8 +/- 1% from BIA and 8.5 +/- 2% from HW (P > 0.05). Subjects consumed 3,217 +/- 1,027 kcals; 1,848 +/- 768 kcals from carbohydrates; 604 +/- 300 kcals from protein; and 783 +/- 369 kcals from fat. Although work-outs differed among one another, within subject training did not vary. These results suggest that measurement of percent body fat in male body builders and weight trainers is equally as accurate using BIA or HW.

  1. Treatment of Binge Eating Disorder in Racially and Ethnically Diverse Obese Patients in Primary Care: Randomized Placebo-Controlled Clinical Trial of Self-Help and Medication

    PubMed Central

    Grilo, Carlos M.; Masheb, Robin M.; White, Marney A.; Gueorguieva, Ralitza; Barnes, Rachel D.; Walsh, B. Timothy; McKenzie, Katherine C.; Genao, Inginia; Garcia, Rina

    2014-01-01

    Objective The objective was to determine whether treatments with demonstrated efficacy for binge eating disorder (BED) in specialist treatment centers can be delivered effectively in primary care settings to racially/ethnically diverse obese patients with BED. This study compared the effectiveness of self-help cognitive-behavioral therapy (shCBT) and an anti-obesity medication (sibutramine), alone and in combination, and it is only the second placebo-controlled trial of any medication for BED to evaluate longer-term effects after treatment discontinuation. Method 104 obese patients with BED (73% female, 55% non-white) were randomly assigned to one of four 16-week treatments (balanced 2-by-2 factorial design): sibutramine (N=26), placebo (N=27), shCBT+sibutramine (N=26), or shCBT+placebo (N=25). Medications were administered in double-blind fashion. Independent assessments were performed monthly throughout treatment, post-treatment, and at 6- and 12-month follow-ups (16 months after randomization). Results Mixed-models analyses revealed significant time and medication-by-time interaction effects for percent weight loss, with sibutramine but not placebo associated with significant change over time. Percent weight loss differed significantly between sibutramine and placebo by the third month of treatment and at post-treatment. After the medication was discontinued at post-treatment, weight re-gain occurred in sibutramine groups and percent weight loss no longer differed among the four treatments at 6- and 12-month follow-ups. For binge-eating, mixed-models revealed significant time and shCBT-by-time interaction effects: shCBT had significantly lower binge-eating frequency at 6-month follow-up but the treatments did not differ significantly at any other time point. Demographic factors did not significantly predict or moderate clinical outcomes. Discussion Our findings suggest that pure self-help CBT and sibutramine did not show long-term effectiveness relative to placebo for treating BED in racially/ethnically diverse obese patients in primary care. Overall, the treatments differed little with respect to binge-eating and associated outcomes. Sibutramine was associated with significantly greater acute weight loss than placebo and the observed weight-regain following discontinuation of medication suggests that anti-obesity medications need to be continued for weight loss maintenance. Demographic factors did not predict/moderate clinical outcomes in this diverse patient group. PMID:24857821

  2. Volcanogenic Uranium Deposits: Geology, Geochemical Processes, and Criteria for Resource Assessment

    USGS Publications Warehouse

    Nash, J. Thomas

    2010-01-01

    Felsic volcanic rocks have long been considered a primary source of uranium for many kinds of uranium deposits, but volcanogenic uranium deposits themselves have generally not been important resources. Until the past few years, resource summaries for the United States or the world generally include volcanogenic in the broad category of 'other deposits' because they comprised less than 0.5 percent of past production or estimated resources. Exploration in the United States from the 1940s through 1982 discovered hundreds of prospects in volcanic rocks, of which fewer than 20 had some recorded production. Intensive exploration in the late 1970s found some large deposits, but low grades (less than about 0.10 percent U3O8) discouraged economic development. A few deposits in the world, drilled in the 1980s and 1990s, are now known to contain large resources (>20,000 tonnes U3O8). However, research on ore-forming processes and exploration for volcanogenic deposits has lagged behind other kinds of uranium deposits and has not utilized advances in understanding of geology, geochemistry, and paleohydrology of ore deposits in general and epithermal deposits in particular. This review outlines new ways to explore and assess for volcanogenic deposits, using new concepts of convection, fluid mixing, and high heat flow to mobilize uranium from volcanic source rocks and form deposits that are postulated to be large. Much can also be learned from studies of epithermal metal deposits, such as the important roles of extensional tectonics, bimodal volcanism, and fracture-flow systems related to resurgent calderas. Regional resource assessment is helped by genetic concepts, but hampered by limited information on frontier areas and undiscovered districts. Diagnostic data used to define ore deposit genesis, such as stable isotopic data, are rarely available for frontier areas. A volcanic environment classification, with three classes (proximal, distal, and pre-volcanic structures), permits use of geologic features on 1:500,000 to 1:100,000 scale maps. Geochemical databases for volcanic rocks are postulated to be more effective than databases for stream sediments or surface radioactivity, both of which tend to be inconsistent because of variable leaching of uranium from soils. Based on empirical associations, spatial associations with areas of wet paleoclimate, adjacent oil and gas fields, or evaporite beds are deemed positive. Most difficult to estimate is the location of depositional traps and reduction zones, in part because they are mere points at regional scale. Grade and tonnage data are reviewed and discussed for 32 deposits in the world. Experience of mining engineers and geologists in Asia suggests that tonnages could be higher than presently known in the Western Hemisphere. Geological analysis, and new data from Asia, suggest a typical or median deposit tonnage of about 5,000 tonnes U3O8, and an optimistic forecast of discoveries in the range of 5,000 to 20,000 tonnes U3O8. The likely grade of undiscovered deposits could be about 0.15 percent U3O8 , based on both western and eastern examples. Volcanic terrane is under-explored, relative to other kinds of uranium deposits, and is considered a favorable frontier area for new discoveries.

  3. Perceptions of body image among Malaysian male and female adolescents.

    PubMed

    Khor, G L; Zalilah, M S; Phan, Y Y; Ang, M; Maznah, B; Norimah, A K

    2009-03-01

    Body image concerns are common among adolescents as they undergo rapid physical growth and body shape changes. Having a distorted body image is a risk factor for the development of disordered eating behaviours and eating disorders. This study was undertaken to investigate body image concerns among Malaysian male and female adolescents aged 11-15 years. A total of 2,050 adolescents (1,043 males and 1,007 females) with a mean age of 13.1 +/- 0.8 years from secondary schools in Kedah and Pulau Pinang were included in the study. Questionnaires were used to collect socioeconomic data and body image indicators. The majority (87 percent) of the adolescents were concerned with their body shape. While the majority of underweight, normal weight and overweight male and female subjects perceived their body weight status correctly according to their body mass index (BMI), a noteworthy proportion in each category misjudged their body weight. About 35.4 percent of the males and 20.5 percent of the females in the underweight category perceived themselves as having a normal weight, while 29.4 percent and 26.7 percent of the overweight males and females respectively also perceived that they had a normal weight. A higher proportion of the females (20 percent) than males (9 percent) with a normal BMI perceived themselves as fat. Most of the male (78-83 percent) and female subjects (69-74 percent) in all the BMI categories desired to be taller than their current height. An appreciable proportion of both the males (41.9 percent) and females (38.2 percent) preferred to remain thin, or even to be thinner (23.7 percent of males and 5.9 percent of females). Females had a significantly higher mean body dissatisfaction score than males, indicating their preference for a slimmer body shape. More males (49.1 percent) preferred a larger body size while more females (58.3 percent) idealised a smaller body size. Compared to normal weight and underweight subjects, overweight males and females expressed lower confidence and acceptance levels, as well as expressed greater preoccupation with and anxiety over their body weight and shape. As having a distorted body image may lead to negative effects such as unhealthy eating habits and disordered eating behaviours, it is recommended that appropriate educational efforts on body image be incorporated into school health activities for adolescents.

  4. High capacity carbon dioxide sorbent

    DOEpatents

    Dietz, Steven Dean; Alptekin, Gokhan; Jayaraman, Ambalavanan

    2015-09-01

    The present invention provides a sorbent for the removal of carbon dioxide from gas streams, comprising: a CO.sub.2 capacity of at least 9 weight percent when measured at 22.degree. C. and 1 atmosphere; an H.sub.2O capacity of at most 15 weight percent when measured at 25.degree. C. and 1 atmosphere; and an isosteric heat of adsorption of from 5 to 8.5 kilocalories per mole of CO.sub.2. The invention also provides a carbon sorbent in a powder, a granular or a pellet form for the removal of carbon dioxide from gas streams, comprising: a carbon content of at least 90 weight percent; a nitrogen content of at least 1 weight percent; an oxygen content of at most 3 weight percent; a BET surface area from 50 to 2600 m.sup.2/g; and a DFT micropore volume from 0.04 to 0.8 cc/g.

  5. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chakravarti, D.; Eisler, R.

    The values for strontium-90 and gross beta activity in the fat and non- fat fractions from the livers of twelve coconut crabs (Birgus latro) collected at Rongelap Atoll during March 1958 are presented. Although fat constituted an average of 47 percent by weight on a wet weight basis (74 percent on a dry weight basis), gross beta activity of the fat fraction amounted to less than 0.5 percent of the total activity on a wet weight basis. Fat content on a wet weight basis had a range of 31 percent to 65 percent. There is a linear relationship between strontium-90more » activity and gross beta activity. Since the fat content of coconut crab liver is variable and the fat fraction contains practically no radioactivity, it is suggested that the radioactivity (and mineral content) of liver samples be compared on the basis of the non-fat solids. (auth)« less

  6. METHOD OF FABRICATING A URANIUM-ZIRCONIUM HYDRIDE REACTOR CORE

    DOEpatents

    Weeks, I.F.; Goeddel, W.V.

    1960-03-22

    A method is described of evenly dispersing uranlum metal in a zirconium hydride moderator to produce a fuel element for nuclear reactors. According to the invention enriched uranium hydride and zirconium hydride powders of 200 mesh particle size are thoroughly admixed to form a mixture containing 0.1 to 3% by weight of U/sup 235/ hydride. The mixed powders are placed in a die and pressed at 100 tons per square inch at room temperature. The resultant compacts are heated in a vacuum to 300 deg C, whereby the uranium hydride deoomposes into uranium metal and hydrogen gas. The escaping hydrogen gas forms a porous matrix of zirconium hydride, with uramum metal evenly dispersed therethrough. The advantage of the invention is that the porosity and uranium distribution of the final fuel element can be more closely determined and controlled than was possible using prior methods of producing such fuel ele- ments.

  7. Pulsed activation measurement of the Doppler effect of uranium-238 over the temperature range 300 to 3115 K

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bhattacharyya, S.K.; Russell, G.J.; Foell, W.K.

    The Doppler effect for /sup 235/U-enriched UO/sub 2/ fuel pellets has been measured by the Pulsed Activation Doppler (PAD) technique in a TRIGA reactor. A combination of static electrical preheating and pulsed fission heating during irradiation was used to perform the measurements at temperatures extending from 300 K to the melting point of UO/sub 2/ (3115 K). The /sup 235/U enrichment in the experimental samples investigated ranged from 0.22 to 12 percent by weight. Measurements were made at under partially molten conditions of UO/sub 2/. Two sizes of pellets were used, with nominal surface-to-mass ratio values of 0.63 and 1.08more » cm/sup 2//g, respectively. The experimentally determined values of the Doppler ratio were in good agreement with resonance integral ratios determined from GAROL calculations and extrapolations of the low-temperature Hellstrand correlation.« less

  8. Comparison of recycling outcomes in three types of recycling collection units.

    PubMed

    Andrews, Ashley; Gregoire, Mary; Rasmussen, Heather; Witowich, Gretchen

    2013-03-01

    Commercial institutions have many factors to consider when implementing an effective recycling program. This study examined the effectiveness of three different types of recycling bins on recycling accuracy by determining the percent weight of recyclable material placed in the recycling bins, comparing the percent weight of recyclable material by type of container used, and examining whether a change in signage increased recycling accuracy. Data were collected over 6 weeks totaling 30 days from 3 different recycling bin types at a Midwest University medical center. Five bin locations for each bin type were used. Bags from these bins were collected, sorted into recyclable and non-recyclable material, and weighed. The percent recyclable material was calculated using these weights. Common contaminates found in the bins were napkins and paper towels, plastic food wrapping, plastic bags, and coffee cups. The results showed a significant difference in percent recyclable material between bin types and bin locations. Bin type 2 was found to have one bin location to be statistically different (p=0.048), which may have been due to lack of a trash bin next to the recycling bin in that location. Bin type 3 had significantly lower percent recyclable material (p<0.001), which may have been due to lack of a trash bin next to the recycling bin and increased contamination due to the combination of commingled and paper into one bag. There was no significant change in percent recyclable material in recycling bins post signage change. These results suggest a signage change may not be an effective way, when used alone, to increase recycling compliance and accuracy. This study showed two or three-compartment bins located next to a trash bin may be the best bin type for recycling accuracy. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. TREATMENT OF URANIUM SURFACES

    DOEpatents

    Slunder, C.J.

    1959-02-01

    An improved process is presented for prcparation of uranium surfaces prior to electroplating. The surfacc of the uranium to be electroplated is anodized in a bath comprising a solution of approximately 20 to 602 by weight of phosphoric acid which contains about 20 cc per liter of concentrated hydrochloric acid. Anodization is carried out for approximately 20 minutes at a current density of about 0.5 amperes per square inch at a temperature of about 35 to 45 C. The oxidic film produced by anodization is removed by dipping in strong nitric acid, followed by rinsing with water just prior to electroplating.

  10. Shield materials recommended for space power nuclear reactors

    NASA Technical Reports Server (NTRS)

    Kaszubinski, L. J.

    1973-01-01

    Lithium hydride is recommended for neutron attenuation and depleted uranium is recommended for gamma ray attenuation. For minimum shield weights these materials must be arranged in alternate layers to attenuate the secondary gamma rays efficiently. In the regions of the shield near the reactor, where excessive fissioning occurs in the uranium, a tungsten alloy is used instead. Alloys of uranium such as either the U-0.5Ti or U-8Mo are available to accommodate structural requirements. The zone-cooled casting process is recommended for lithium hydride fabrication. Internal honeycomb reinforcement to control cracks in the lithium hydride is recommended.

  11. A comparison of methods for organ-weight data adjustment in chicks.

    PubMed

    Brown, D R; Southern, L L; Baker, D H

    1985-02-01

    An experiment was conducted with 168 Arbor Acre X Peterson unsexed, crossbred broiler chicks to compare methods of expressing organ-weight data and to assess changes in organ weights and physiological parameters as body weight (97 to 791 g) and age (5 to 26 days) increased. Actual wet weight of liver, heart, intestine, spleen, and pancreas and percent bone ash increased (P less than .01) as age and body weight increased. Tibia length-to-width ratio decreased (P less than .01) as age and body weight increased. Blood hemoglobin, hematocrit, and plasma protein were not affected (P greater than .1) by age or by body weight. Liver, heart, and intestinal weight decreased (P less than .01) and spleen weight increased (P less than .01) as body weight and age increased when these tissue weights were expressed as percent of body weight. Liver weight adjusted for body weight by covariance analysis, however, remained constant; adjusted heart and intestinal weights decreased (P less than .01), and adjusted spleen weights increased (P less than .01) with increasing age and body weight. The covariate, body weight, was not significant (P greater than .1) for pancreas weight, tibia length-to-width ratio, and percent bone ash. Except for spleen, adjustment by covariance analysis more effectively reduced variation due to body weight than did expression as percent of body weight.(ABSTRACT TRUNCATED AT 250 WORDS)

  12. Effects of methyl mercury on reproduction in American kestrels

    USGS Publications Warehouse

    Albers, P.H.; Koterba, M.T.; Rossmann, R.; French, J.B.; Bennett, R.S.; Bauer, W.C.; Link, W.A.

    2006-01-01

    Methyl mercury (MeHg) readily passes through biological membranes, accumulates in individuals, and biomagnifies in higher order predators. It is acutely toxic to some birds at 5-15 parts per million (ppm) wet weight in the diet, and it can damage the central nervous system, impair reproduction, and retard growth and development. The effects of MeHg on reproduction in wild raptors are poorly known, and experiments with captive raptors have not included measures of reproductive response. In this study, breeding pairs of captive American kestrels (Falco sparverius) were exposed to environmentally realistic concentrations of MeHg in the diet and their subsequent reproduction was measured. Egg production, incubation performance, and the number of eggs hatched markedly decreased between 3.2 and 4.6 ppm MeHg dry weight in the diet. The percent of eggs hatched declined between 0.75 and 2 ppm MeHg dry weight in the diet and further declined to almost total hatching failure between 3.2 and 4.6 ppm. The number of fledglings and the percent of nestlings fledged were greatly reduced at 0.75 ppm MeHg dry weight in the diet and began a final sharp decline between 2 and 3.2 ppm. Dietary concentrations of > 4.6 ppm MeHg dry weight were associated with total fledging failure. Mercury concentrations in a set of 19 `second-laid? eggs collected from all groups were related to dietary concentrations of MeHg and the reproductive responses of kestrels in each group. Observed percentage declines in fledgling production caused by diets containing >2 ppm MeHg dry weight would result in the production of insufficient numbers of young kestrels for maintenance of wild populations. Concentrations of total Hg in eggs from the highest diet group (5.9 ppm dry weight) were higher than egg concentrations reported for either wild birds or for captive birds fed dry commercial food containing 5 ppm MeHg wet weight.

  13. High-temperature molten salt thermal energy storage systems for solar applications

    NASA Technical Reports Server (NTRS)

    Petri, R. J.; Claar, T. D.; Ong, E.

    1983-01-01

    Experimental results of compatibility screening studies of 100 salt/containment/thermal conductivity enhancement (TCE) combinations for the high temperature solar thermal application range of 704 deg to 871 C (1300 to 1600 F) are presented. Nine candidate containment/HX alloy materials and two TCE materials were tested with six candidate solar thermal alkali and alkaline earth carbonate storage salts (both reagent and technical grade of each). Compatibility tests were conducted with salt encapsulated in approx. 6.0 inch x 1 inch welded containers of test material from 300 to 3000 hours. Compatibility evaluations were end application oriented, considering the potential 30 year lifetime requirement of solar thermal power plant components. Analyses were based on depth and nature of salt side corrosion of materials, containment alloy thermal aging effects, weld integrity in salt environment, air side containment oxidation, and chemical and physical analyses of the salt. A need for more reliable, and in some cases first time determined thermophysical and transport property data was also identified for molten carbonates in the 704 to 871 C temperature range. In particular, accurate melting point (mp) measurements were performed for Li2CO3 and Na2CO3 while melting point, heat of fusion, and specific heat determinations were conducted on 81.3 weight percent Na2CO3-18.7 weight percent K2CO3 and 52.2 weight percent BaCO3-47.8 weight percent Na2CO3 to support future TES system design and ultimate scale up of solar thermal energy storage (TES) subsystems.

  14. Personal Care Product Use in Men and Urinary Concentrations of Select Phthalate Metabolites and Parabens: Results from the Environment And Reproductive Health (EARTH) Study

    PubMed Central

    Coull, Brent A.; Gaskins, Audrey J.; Williams, Michelle A.; Skakkebaek, Niels E.; Ford, Jennifer B.; Ye, Xiaoyun; Calafat, Antonia M.; Braun, Joseph M.; Hauser, Russ

    2017-01-01

    Background: Personal care products (PCPs) are exposure sources to phthalates and parabens; however, their contribution to men’s exposure is understudied. Objectives: We examined the association between PCP use and urinary concentrations of phthalate metabolites and parabens in men. Methods: In a prospective cohort, at multiple study visits, men self-reported their use of 14 PCPs and provided a urine sample (2004–2015, Boston, MA). We measured urinary concentrations of 9 phthalate metabolites and methylparaben, propylparaben, and butylparaben. We estimated the covariate-adjusted percent change in urinary concentrations associated with PCP use using linear mixed and Tobit mixed regressions. We also estimated weights for each PCP in a weighted binary score regression and modeled the resulting composite weighted PCP use. Results: Four hundred men contributed 1,037 urine samples (mean of 3/man). The largest percent increase in monoethyl phthalate (MEP) was associated with use of cologne/perfume (83%, p-value<0.01) and deodorant (74%, p-value<0.01). In contrast, the largest percent increase for parabens was associated with the use of suntan/sunblock lotion (66–156%) and hand/body lotion (79–147%). Increases in MEP and parabens were generally greater with PCP use within 6 h of urine collection. A subset of 10 PCPs that were used within 6 h of urine collection contributed to at least 70% of the weighted score and predicted a 254–1,333% increase in MEP and parabens concentrations. Associations between PCP use and concentrations of the other phthalate metabolites were not statistically significant. Conclusions: We identified 10 PCPs of relevance and demonstrated that their use within 6 h of urine collection strongly predicted MEP and paraben urinary concentrations. https://doi.org/10.1289/EHP1374 PMID:28886595

  15. Short-term changes in affective, behavioral, and cognitive components of body image after bariatric surgery.

    PubMed

    Williams, Gail A; Hudson, Danae L; Whisenhunt, Brooke L; Stone, Megan; Heinberg, Leslie J; Crowther, Janis H

    2018-04-01

    Many bariatric surgery candidates report body image concerns before surgery. Research has reported post-surgical improvements in body satisfaction, which may be associated with weight loss. However, research has failed to comprehensively examine changes in affective, behavioral, and cognitive body image. This research examined (1) short-term changes in affective, behavioral, and cognitive components of body image from pre-surgery to 1- and 6-months after bariatric surgery, and (2) the association between percent weight loss and these changes. Participants were recruited from a private hospital in the midwestern United States. Eighty-eight females (original N = 123; lost to follow-up: n = 15 at 1-month and n = 20 at 6-months post-surgery) completed a questionnaire battery, including the Body Attitudes Questionnaire, Body Checking Questionnaire, Body Image Avoidance Questionnaire, and Body Shape Questionnaire, and weights were obtained from patients' medical records before and at 1- and 6-months post-surgery. Results indicated significant decreases in body dissatisfaction, feelings of fatness, and body image avoidance at 1- and 6-months after bariatric surgery, with the greatest magnitude of change occurring for body image avoidance. Change in feelings of fatness was significantly correlated with percent weight loss at 6-months, but not 1-month, post-surgery. These findings highlight the importance of examining short-term changes in body image from a multidimensional perspective in the effort to improve postsurgical outcomes. Unique contributions include the findings regarding the behavioral component of body image, as body image avoidance emerges as a particularly salient concern that changes over time among bariatric surgery candidates. Copyright © 2018 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

  16. Enoxaparin versus unfractionated heparin with fibrinolysis for ST-elevation myocardial infarction.

    PubMed

    Antman, Elliott M; Morrow, David A; McCabe, Carolyn H; Murphy, Sabina A; Ruda, Mikhail; Sadowski, Zygmunt; Budaj, Andrzej; López-Sendón, Jose L; Guneri, Sema; Jiang, Frank; White, Harvey D; Fox, Keith A A; Braunwald, Eugene

    2006-04-06

    Unfractionated heparin is often used as adjunctive therapy with fibrinolysis in patients with ST-elevation myocardial infarction. We compared a low-molecular-weight heparin, enoxaparin, with unfractionated heparin for this purpose. We randomly assigned 20,506 patients with ST-elevation myocardial infarction who were scheduled to undergo fibrinolysis to receive enoxaparin throughout the index hospitalization or weight-based unfractionated heparin for at least 48 hours. The primary efficacy end point was death or nonfatal recurrent myocardial infarction through 30 days. The primary end point occurred in 12.0 percent of patients in the unfractionated heparin group and 9.9 percent of those in the enoxaparin group (17 percent reduction in relative risk, P<0.001). Nonfatal reinfarction occurred in 4.5 percent of the patients receiving unfractionated heparin and 3.0 percent of those receiving enoxaparin (33 percent reduction in relative risk, P<0.001); 7.5 percent of patients given unfractionated heparin died, as did 6.9 percent of those given enoxaparin (P=0.11). The composite of death, nonfatal reinfarction, or urgent revascularization occurred in 14.5 percent of patients given unfractionated heparin and 11.7 percent of those given enoxaparin (P<0.001); major bleeding occurred in 1.4 percent and 2.1 percent, respectively (P<0.001). The composite of death, nonfatal reinfarction, or nonfatal intracranial hemorrhage (a measure of net clinical benefit) occurred in 12.2 percent of patients given unfractionated heparin and 10.1 percent of those given enoxaparin (P<0.001). In patients receiving fibrinolysis for ST-elevation myocardial infarction, treatment with enoxaparin throughout the index hospitalization is superior to treatment with unfractionated heparin for 48 hours but is associated with an increase in major bleeding episodes. These findings should be interpreted in the context of net clinical benefit. (ClinicalTrials.gov number, NCT00077792.). Copyright 2006 Massachusetts Medical Society.

  17. Composite Matrix Experimental Combustor

    DTIC Science & Technology

    1994-04-01

    utilized zirconia powder prereacted with 12 weight-percent yt- tria stabilizer (12-YSZ) with good results. Subsequent investigations indicated that...YSZ. The choice of material for the ceramic layer also considered work at Allison using 6-8 w/o yttria-stabi- lized zirconia powder obtained from the

  18. Simulation of streamflow, evapotranspiration, and groundwater recharge in the middle Nueces River watershed, south Texas, 1961-2008

    USGS Publications Warehouse

    Dietsch, Benjamin J.; Wehmeyer, Loren L.

    2012-01-01

    Selected results of the model include streamflow yields for the subwatersheds and water-balance information for the Carrizo–Wilcox aquifer outcrop area. For the entire model domain, the area-weighted mean streamflow yield from 1961 to 2008 was 1.12 inches/year. The mean annual rainfall on the outcrop area during the 1961–2008 simulation period was 21.7 inches. Of this rainfall, an annual mean of 20.1 inches (about 93 percent) was simulated as evapotranspiration, 1.2 inches (about 6 percent) was simulated as groundwater recharge, and 0.5 inches (about 2 percent) was simulated as surface runoff.

  19. Advanced Rotorcraft Transmission (ART) program

    NASA Technical Reports Server (NTRS)

    Heath, Gregory F.; Bossler, Robert B., Jr.

    1993-01-01

    Work performed by the McDonnell Douglas Helicopter Company and Lucas Western, Inc. within the U.S. Army/NASA Advanced Rotorcraft Transmission (ART) Program is summarized. The design of a 5000 horsepower transmission for a next generation advanced attack helicopter is described. Government goals for the program were to define technology and detail design the ART to meet, as a minimum, a weight reduction of 25 percent, an internal noise reduction of 10 dB plus a mean-time-between-removal (MTBR) of 5000 hours compared to a state-of-the-art baseline transmission. The split-torque transmission developed using face gears achieved a 40 percent weight reduction, a 9.6 dB noise reduction and a 5270 hour MTBR in meeting or exceeding the above goals. Aircraft mission performance and cost improvements resulting from installation of the ART would include a 17 to 22 percent improvement in loss-exchange ratio during combat, a 22 percent improvement in mean-time-between-failure, a transmission acquisition cost savings of 23 percent of $165K, per unit, and an average transmission direct operating cost savings of 33 percent, or $24K per flight hour. Face gear tests performed successfully at NASA Lewis are summarized. Also, program results of advanced material tooth scoring tests, single tooth bending tests, Charpy impact energy tests, compact tension fracture toughness tests and tensile strength tests are summarized.

  20. Development of Army High-Energy Fuel for Diesel/Turbine-Powered Surface Equipment. Phase II

    DTIC Science & Technology

    1981-12-01

    preparation. The same extracting procedure used with methylene chloride was then used with pen- tans. A 3.0-percent loss in weight was noted, and a residue...minimum time to reach the target, and minimum weight . Since small missiles, such as the cruise, are volume-limited, it is imperative that the fuel contains...tetrahydrodicyclopentadiene (C1 0 R1 6 ) Molecular Weight 136.2 C:H Ratio 0.62 r Specific Gravity @ 15.60C (60*F) 0.94 Heating Value, Btu/gal. 142,000

  1. Drinking Water with Uranium below the U.S. EPA Water Standard Causes Estrogen Receptor–Dependent Responses in Female Mice

    PubMed Central

    Raymond-Whish, Stefanie; Mayer, Loretta P.; O’Neal, Tamara; Martinez, Alisyn; Sellers, Marilee A.; Christian, Patricia J.; Marion, Samuel L.; Begay, Carlyle; Propper, Catherine R.; Hoyer, Patricia B.; Dyer, Cheryl A.

    2007-01-01

    Background The deleterious impact of uranium on human health has been linked to its radioactive and heavy metal–chemical properties. Decades of research has defined the causal relationship between uranium mining/milling and onset of kidney and respiratory diseases 25 years later. Objective We investigated the hypothesis that uranium, similar to other heavy metals such as cadmium, acts like estrogen. Methods In several experiments, we exposed intact, ovariectomized, or pregnant mice to depleted uranium in drinking water [ranging from 0.5 μg/L (0.001 μM) to 28 mg/L (120 μM). Results Mice that drank uranium-containing water exhibited estrogenic responses including selective reduction of primary follicles, increased uterine weight, greater uterine luminal epithelial cell height, accelerated vaginal opening, and persistent presence of cornified vaginal cells. Coincident treatment with the antiestrogen ICI 182,780 blocked these responses to uranium or the synthetic estrogen diethylstilbestrol. In addition, mouse dams that drank uranium-containing water delivered grossly normal pups, but they had significantly fewer primordial follicles than pups whose dams drank control tap water. Conclusions Because of the decades of uranium mining/milling in the Colorado plateau in the Four Corners region of the American Southwest, the uranium concentration and the route of exposure used in these studies are environmentally relevant. Our data support the conclusion that uranium is an endocrine-disrupting chemical and populations exposed to environmental uranium should be followed for increased risk of fertility problems and reproductive cancers. PMID:18087588

  2. 75 FR 5947 - Stainless Steel Sheet and Strip in Coils from Taiwan: Final Results and Rescission in Part of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-05

    ... also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent..., chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0..., silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each...

  3. Image segmentation for uranium isotopic analysis by SIMS: Combined adaptive thresholding and marker controlled watershed approach

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Willingham, David G.; Naes, Benjamin E.; Heasler, Patrick G.

    A novel approach to particle identification and particle isotope ratio determination has been developed for nuclear safeguard applications. This particle search approach combines an adaptive thresholding algorithm and marker-controlled watershed segmentation (MCWS) transform, which improves the secondary ion mass spectrometry (SIMS) isotopic analysis of uranium containing particle populations for nuclear safeguards applications. The Niblack assisted MCWS approach (a.k.a. SEEKER) developed for this work has improved the identification of isotopically unique uranium particles under conditions that have historically presented significant challenges for SIMS image data processing techniques. Particles obtained from five NIST uranium certified reference materials (CRM U129A, U015, U150, U500more » and U850) were successfully identified in regions of SIMS image data 1) where a high variability in image intensity existed, 2) where particles were touching or were in close proximity to one another and/or 3) where the magnitude of ion signal for a given region was count limited. Analysis of the isotopic distributions of uranium containing particles identified by SEEKER showed four distinct, accurately identified 235U enrichment distributions, corresponding to the NIST certified 235U/238U isotope ratios for CRM U129A/U015 (not statistically differentiated), U150, U500 and U850. Additionally, comparison of the minor uranium isotope (234U, 235U and 236U) atom percent values verified that, even in the absence of high precision isotope ratio measurements, SEEKER could be used to segment isotopically unique uranium particles from SIMS image data. Although demonstrated specifically for SIMS analysis of uranium containing particles for nuclear safeguards, SEEKER has application in addressing a broad set of image processing challenges.« less

  4. National hospital input price index.

    PubMed

    Freeland, M S; Anderson, G; Schendler, C E

    1979-01-01

    The national community hospital input price index presented here isolates the effects of prices of goods and services required to produce hospital care and measures the average percent change in prices for a fixed market basket of hospital inputs. Using the methodology described in this article, weights for various expenditure categories were estimated and proxy price variables associated with each were selected. The index is calculated for the historical period 1970 through 1978 and forecast for 1979 through 1981. During the historical period, the input price index increased an average of 8.0 percent a year, compared with an average rate of increase of 6.6 percent for overall consumer prices. For the period 1979 through 1981, the average annual increase is forecast at between 8.5 and 9.0 per cent. Using the index to deflate growth in expenses, the level of real growth in expenditures per inpatient day (net service intensity growth) averaged 4.5 percent per year with considerable annual variation related to government and hospital industry policies.

  5. Multibody aircraft study, volume 2

    NASA Technical Reports Server (NTRS)

    Moore, J. W.; Craven, E. P.; Farmer, B. T.; Honrath, J. F.; Stephens, R. E.; Bronson, C. E., Jr.; Meyer, R. T.; Hogue, J. G.

    1981-01-01

    The potential benefits of a multibody aircraft when compared to a single body aircraft are presented. The analyses consist principally of a detailed point design analysis of three multibody and one single body aircraft, based on a selected payload of 350,000 kg (771,618 lb), for final aircraft definitions; sensitivity studies to evaluate the effects of variations in payload, wing semispan body locations, and fuel price; recommendations as to the research and technology requirements needed to validate the multibody concept. Two, two body, one, three body, and one single body aircraft were finalized for the selected payload, with DOC being the prime figure of merit. When compared to the single body, the multibody aircraft showed a reduction in DOC by as much as 11.3 percent. Operating weight was reduced up to 14 percent, and fly away cost reductions ranged from 8.6 to 13.4 percent. Weight reduction, hence cost, of the multibody aircraft resulted primarily from the wing bending relief afforded by the bodies being located outboard on the wing.

  6. Multibody aircraft study, volume 1

    NASA Technical Reports Server (NTRS)

    Moore, J. W.; Craven, E. P.; Farmer, B. T.; Honrath, J. F.; Stephens, R. E.; Bronson, C. E., Jr.; Meyer, R. T.; Hogue, J. H.

    1982-01-01

    The potential benefits of a multibody aircraft when compared to a single body aircraft are presented. The analyses consist principally of a detailed point design analysis of three multibody and one single body aircraft, based on a selected payload of 350,000 kg (771,618 lb), for final aircraft definitions; sensitivity studies to evaluate the effects of variations in payload, wing semispan body locations, and fuel price; recommendations as to the research and technology requirements needed to validate the multibody concept. Two, two body, one, three body, and one single body aircraft were finalized for the selected payload, with DOC being the prime figure of merit. When compared to the single body, the multibody aircraft showed a reduction in DOC by as much as 11.3 percent. Operating weight was reduced up to 14 percent, and fly away cost reductions ranged from 8.6 to 13.4 percent. Weight reduction, hence cost, of the multibody aircraft resulted primarily from the wing bending relief afforded by the bodies being located outboard on the wing.

  7. Result Summary for the Area 5 Radioactive Waste Management Site Performance Assessment Model Version 4.110

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NSTec Environmental Management

    2011-07-20

    Results for Version 4.110 of the Area 5 Radioactive Waste Management Site (RWMS) performance assessment (PA) model are summarized. Version 4.110 includes the fiscal year (FY) 2010 inventory estimate, including a future inventory estimate. Version 4.110 was implemented in GoldSim 10.11(SP4). The following changes have been implemented since the last baseline model, Version 4.105: (1) Updated the inventory and disposal unit configurations with data through the end of FY 2010. (1) Implemented Federal Guidance Report 13 Supplemental CD dose conversion factors (U.S. Environmental Protection Agency, 1999). Version 4.110 PA results comply with air pathway and all-pathways annual total effective dosemore » (TED) performance objectives (Tables 2 and 3, Figures 1 and 2). Air pathways results decrease moderately for all scenarios. The time of the maximum for the air pathway open rangeland scenario shifts from 1,000 to 100 years (y). All-pathways annual TED increases for all scenarios except the resident scenario. The maximum member of public all-pathways dose occurs at 1,000 y for the resident farmer scenario. The resident farmer dose was predominantly due to technetium-99 (Tc-99) (82 percent) and lead-210 (Pb-210) (13 percent). Pb-210 present at 1,000 y is produced predominantly by radioactive decay of uranium-234 (U-234) present at the time of disposal. All results for the postdrilling and intruder-agriculture scenarios comply with the performance objectives (Tables 4 and 5, Figures 3 and 4). The postdrilling intruder results are similar to Version 4.105 results. The intruder-agriculture results are similar to Version 4.105, except for the Pit 6 Radium Disposal Unit (RaDU). The intruder-agriculture result for the Shallow Land Burial (SLB) disposal units is a significant fraction of the performance objective and exceeds the performance objective at the 95th percentile. The intruder-agriculture dose is due predominantly to Tc-99 (75 percent) and U-238 (9.5 percent). The acute intruder scenario results comply with all performance objectives (Tables 6 and 7, Figures 5 and 6). The acute construction result for the SLB disposal units decreases significantly with this version. The maximum acute intruder dose occurs at 1,000 y for the SLB disposal units under the acute construction scenario. The acute intruder dose is caused by multiple radionuclides including U-238 (31 percent), Th-229 (28 percent), plutonium-239 (8.6 percent), U-233 (7.8 percent), and U-234 (6.7 percent). All results for radon-222 (Rn-222) flux density comply with the performance objective (Table 8, Figure 7). The mean Pit 13 RaDU flux density is close to the 0.74 Bq m{sup -2} s{sup -1} limit.« less

  8. Hot Hydrogen Testing of Tungsten-Uranium Dioxide (W-UO2) CERMET Fuel Materials for Nuclear Thermal Propulsion

    NASA Technical Reports Server (NTRS)

    Hickman, Robert; Broadway, Jeramie

    2014-01-01

    CERMET fuel materials are being developed at the NASA Marshall Space Flight Center for a Nuclear Cryogenic Propulsion Stage. Recent work has resulted in the development and demonstration of a Compact Fuel Element Environmental Test (CFEET) System that is capable of subjecting depleted uranium fuel material samples to hot hydrogen. A critical obstacle to the development of an NCPS engine is the high-cost and safety concerns associated with developmental testing in nuclear environments. The purpose of this testing capability is to enable low-cost screening of candidate materials, fabrication processes, and further validation of concepts. The CERMET samples consist of depleted uranium dioxide (UO2) fuel particles in a tungsten metal matrix, which has been demonstrated on previous programs to provide improved performance and retention of fission products1. Numerous past programs have utilized hot hydrogen furnace testing to develop and evaluate fuel materials. The testing provides a reasonable simulation of temperature and thermal stress effects in a flowing hydrogen environment. Though no information is gained about radiation damage, the furnace testing is extremely valuable for development and verification of fuel element materials and processes. The current work includes testing of subscale W-UO2 slugs to evaluate fuel loss and stability. The materials are then fabricated into samples with seven cooling channels to test a more representative section of a fuel element. Several iterations of testing are being performed to evaluate fuel mass loss impacts from density, microstructure, fuel particle size and shape, chemistry, claddings, particle coatings, and stabilizers. The fuel materials and forms being evaluated on this effort have all been demonstrated to control fuel migration and loss. The objective is to verify performance improvements of the various materials and process options prior to expensive full scale fabrication and testing. Post test analysis will include weight percent fuel loss, microscopy, dimensional tolerance, and fuel stability.

  9. Effects of Naltrexone Sustained- Release/Bupropion Sustained-Release Combination Therapy on Body Weight and Glycemic Parameters in Overweight and Obese Patients With Type 2 Diabetes

    PubMed Central

    Hollander, Priscilla; Gupta, Alok K.; Plodkowski, Raymond; Greenway, Frank; Bays, Harold; Burns, Colleen; Klassen, Preston; Fujioka, Ken

    2013-01-01

    OBJECTIVE To assess the efficacy and safety of 32 mg naltrexone sustained-release (SR)/360 mg bupropion SR (NB) in overweight/obese individuals with type 2 diabetes with or without background oral antidiabetes drugs. RESEARCH DESIGN AND METHODS This was a 56-week, double-blind, placebo-controlled study in which 505 patients received standardized lifestyle intervention and were randomized 2:1 to NB or placebo. Coprimary end points were percent weight change and achievement of ≥5% weight loss. Secondary end points included achievement of HbA1c <7% (53 mmol/mol), achievement of weight loss ≥10%, and change in HbA1c, waist circumference, fasting blood glucose, and lipids. RESULTS In the modified intent-to-treat population (54% female, 80% Caucasian, and mean age 54 years, weight 106 kg, BMI 37 kg/m2, and HbA1c 8.0% [64 mmol/mol]), NB resulted in significantly greater weight reduction (−5.0 vs. −1.8%; P < 0.001) and proportion of patients achieving ≥5% weight loss (44.5 vs. 18.9%, P < 0.001) compared with placebo. NB also resulted in significantly greater HbA1c reduction (−0.6 vs. −0.1% [6.6 vs. 1.1 mmol/mol]; P < 0.001), percent of patients achieving HbA1c <7% (53 mmol/mol) (44.1 vs. 26.3%; P < 0.001), and improvement in triglycerides and HDL cholesterol compared with placebo. NB was associated with higher incidence of nausea (42.3 vs. 7.1%), constipation (17.7 vs. 7.1%), and vomiting (18.3 vs. 3.6%). No difference was observed between groups in the incidence of depression, suicidal ideation, or hypoglycemia. CONCLUSIONS NB therapy in overweight/obese patients with type 2 diabetes induced weight loss, which was associated with improvements in glycemic control and select cardiovascular risk factors and was generally well tolerated with a safety profile similar to that in patients without diabetes. PMID:24144653

  10. Predicting successful long-term weight loss from short-term weight-loss outcomes: new insights from a dynamic energy balance model (the POUNDS Lost study)123

    PubMed Central

    Ivanescu, Andrada E; Martin, Corby K; Heymsfield, Steven B; Marshall, Kaitlyn; Bodrato, Victoria E; Williamson, Donald A; Anton, Stephen D; Sacks, Frank M; Ryan, Donna; Bray, George A

    2015-01-01

    Background: Currently, early weight-loss predictions of long-term weight-loss success rely on fixed percent-weight-loss thresholds. Objective: The objective was to develop thresholds during the first 3 mo of intervention that include the influence of age, sex, baseline weight, percent weight loss, and deviations from expected weight to predict whether a participant is likely to lose 5% or more body weight by year 1. Design: Data consisting of month 1, 2, 3, and 12 treatment weights were obtained from the 2-y Preventing Obesity Using Novel Dietary Strategies (POUNDS Lost) intervention. Logistic regression models that included covariates of age, height, sex, baseline weight, target energy intake, percent weight loss, and deviation of actual weight from expected were developed for months 1, 2, and 3 that predicted the probability of losing <5% of body weight in 1 y. Receiver operating characteristic (ROC) curves, area under the curve (AUC), and thresholds were calculated for each model. The AUC statistic quantified the ROC curve’s capacity to classify participants likely to lose <5% of their body weight at the end of 1 y. The models yielding the highest AUC were retained as optimal. For comparison with current practice, ROC curves relying solely on percent weight loss were also calculated. Results: Optimal models for months 1, 2, and 3 yielded ROC curves with AUCs of 0.68 (95% CI: 0.63, 0.74), 0.75 (95% CI: 0.71, 0.81), and 0.79 (95% CI: 0.74, 0.84), respectively. Percent weight loss alone was not better at identifying true positives than random chance (AUC ≤0.50). Conclusions: The newly derived models provide a personalized prediction of long-term success from early weight-loss variables. The predictions improve on existing fixed percent-weight-loss thresholds. Future research is needed to explore model application for informing treatment approaches during early intervention. The POUNDS Lost study was registered at clinicaltrials.gov as NCT00072995. PMID:25733628

  11. Thermal fatigue-and-oxidation-resistant alloy

    NASA Technical Reports Server (NTRS)

    Bizon, P. T.; Waters, W. J.; Spera, D. A.

    1976-01-01

    Cast nickel-base alloy designated as NASA TAZ-8A has been developed for use in high temperature aircraft engine components. TAZ-8A composition is 8Ta, 6Cr, 6A1, 4Mo, 4W, 2Cb, 0.5Zr, 0.125C, 0.004B, and balance Ni (weight percent). Its specific gravity at room temperature is 8.65.

  12. Soil-Transmitted Helminth Infections and Correlated Risk Factors in Preschool and School-Aged Children in Rural Southwest China

    PubMed Central

    Wang, Xiaobing; Zhang, Linxiu; Luo, Renfu; Wang, Guofei; Chen, Yingdan; Medina, Alexis; Eggleston, Karen; Rozelle, Scott; Smith, D. Scott

    2012-01-01

    We conducted a survey of 1707 children in 141 impoverished rural areas of Guizhou and Sichuan Provinces in Southwest China. Kato-Katz smear testing of stool samples elucidated the prevalence of ascariasis, trichuriasis and hookworm infections in pre-school and school aged children. Demographic, hygiene, household and anthropometric data were collected to better understand risks for infection in this population. 21.2 percent of pre-school children and 22.9 percent of school aged children were infected with at least one of the three types of STH. In Guizhou, 33.9 percent of pre-school children were infected, as were 40.1 percent of school aged children. In Sichuan, these numbers were 9.7 percent and 6.6 percent, respectively. Number of siblings, maternal education, consumption of uncooked meat, consumption of unboiled water, and livestock ownership all correlated significantly with STH infection. Through decomposition analysis, we determined that these correlates made up 26.7 percent of the difference in STH infection between the two provinces. Multivariate analysis showed that STH infection is associated with significantly lower weight-for-age and height-for-age z-scores; moreover, older children infected with STHs lag further behind on the international growth scales than younger children. PMID:23029330

  13. Development of a mathematical model for the dissolution of uranium dioxide. II. Statistical model for the dissolution of uranium dioxide tablets in nitric acid

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhukovskii, Yu.M.; Luksha, O.P.; Nenarokomov, E.A.

    1988-03-01

    We have derived a statistical model for the dissolution of uranium dioxide tablets for the 6 to 12 M concentration range and temperatures from 80/sup 0/C to the boiling point. The model differs qualitatively from the dissolution model for ground uranium dioxide. In the indicated range of experimental conditions, the mean-square deviation of the curves for the model from the experimental curves is not greater than 6%.

  14. Concept Feasibility Report for Electroplating Zirconium onto Uranium Foil - Year 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Coffey, Greg W.; Meinhardt, Kerry D.; Joshi, Vineet V.

    2015-03-01

    The Fuel Fabrication Capability within the U.S. High Performance Research Reactor Conversion Program is funded through the National Nuclear Security Administration (NNSA) NA-26 (Office of Material Management and Minimization). An investigation was commissioned to determine the feasibility of using electroplating techniques to apply a coating of zirconium onto depleted uranium/molybdenum alloy (U-10Mo). Electroplating would provide an alternative method to the existing process of hot roll-bonding zirconium foil onto the U-10Mo fuel foil during the fabrication of fuel elements for high-performance research reactors. The objective of this research was to develop a reproducible and scalable plating process that will produce amore » uniform, 25 μm thick zirconium metal coating on U-10Mo foil. In previous work, Pacific Northwest National Laboratory (PNNL) established a molten salt electroplating apparatus and protocol to plate zirconium metal onto molybdenum foil (Coffey 2015). During this second year of the research, PNNL furthered this work by moving to the U-10Mo alloy system (90 percent uranium:10 percent molybdenum). The original plating apparatus was disassembled and re-assembled in a laboratory capable of handling low-level radioactive materials. Initially, the work followed the previous year’s approach, and the salt bath composition was targeted at the eutectic composition (LiF:NaF:ZrF4 = 26:37:37 mol%). Early results indicated that the formation of uranium fluoride compounds would be problematic. Other salt bath compositions were investigated in order to eliminate the uranium fluoride production (LiF:NaF = 61:39 mol% and LiF:NaF:KF = 46.5:11.5:42 mol% ). Zirconium metal was used as the crucible for the molten salt. Three plating methods were used—isopotential, galvano static, and pulsed plating. The molten salt method for zirconium metal application provided high-quality plating on molybdenum in PNNL’s previous work. A key advantage of this approach is that plating can be performed under conditions that would greatly reduce the quantity of intermetallics that form at the interface between the zirconium and U-10Mo; unlike roll bonding, the molten salt plating approach would allow for complete coverage of the U-10Mo foil with zirconium. When utilizing the experimental parameters developed for zirconium plating onto molybdenum, a uranium fluoride reaction product was formed at the Zr/U-10Mo interface. By controlling the initial plating potential, the uranium fluoride could be prevented; however, the targeted zirconium thickness (25 ±12.5 μm) could not be achieved while maintaining 100% coverage.« less

  15. A 6-month telephone-based weight loss intervention in overweight and obese subjects with idiopathic intracranial hypertension.

    PubMed

    Weil, Richard; Kovacs, Betty; Miller, Neil; McDermott, Michael P; Wall, Michael; Kupersmith, Mark; Pi-Sunyer, F Xavier

    2016-06-01

    The purpose of this paper is to measure the change in body weight after a 6-month telephone-based weight loss intervention in overweight and obese subjects with idiopathic intracranial hypertension (IIH) and mild visual loss randomized to receive either acetazolamide or placebo. One hundred sixty-five subjects with IIH, aged 29.1 ± 7.5 (mean ± SD) and BMI 39.9 + 8.3 kg/m 2 , enrolled at 38 academic and private practice sites in North America, participated in this trial. This was a randomized, double-masked, placebo-controlled trial of acetazolamide in subjects with IIH and mild visual loss. All participants received a reduced-sodium, weight-reduction diet and a 6-month telephone-based weight loss intervention. Six-month changes from baseline in body weight, perimetric mean deviation as assessed by automated perimetry and quality of life using the National Eye Institute Visual Function Questionnaire 25 and the 36-item Short Form Health Survey were measured. Mean percent weight change at 6 months was -5.9% ± 6.7% of initial body weight overall, -3.5% ± 5.9% in the placebo group and -7.8% ± 6.8% in the acetazolamide group. Weight change was not associated with changes in either mean deviation or quality of life scores. Patients with IIH and mild visual loss assigned to either acetazolamide or placebo, all of whom received a 6-month telephone-based weight loss intervention, lost an average of 5.9% of initial body weight, consistent with NHLBI guidelines of 5% to 10% of body weight loss for clinically significant health benefit.

  16. Parametric Study of a Mach 2.4 Transport Engine with Supersonic Through-Flow Rotor and Supersonic Counter-Rotating Diffuser (SSTR/SSCRD)

    NASA Technical Reports Server (NTRS)

    Tran, Donald H.

    2004-01-01

    A parametric study is conducted to evaluate a mixed-flow turbofan equipped with a supersonic through-flow rotor and a supersonic counter-rotating diffuser (SSTR/SSCRD) for a Mach 2.4 civil transport. Engine cycle, weight, and mission analyses are performed to obtain a minimum takeoff gross weight aircraft. With the presence of SSTR/SSCRD, the inlet can be shortened to provide better pressure recovery. For the same engine airflow, the inlet, nacelle, and pylon weights are estimated to be 73 percent lighter than those of a conventional inlet. The fan weight is 31 percent heavier, but overall the installed engine pod weight is 11 percent lighter than the current high-speed civil transport baseline conventional mixed-flow turbofan. The installed specific fuel consumption of the supersonic fan engine is 2 percent higher than that of the baseline turbofan at supersonic cruise. Finally, the optimum SSTR/SSCRD airplane meets the FAR36 Stage 3 noise limit and is within 7 percent of the baseline turbofan airplane takeoff gross weight over a 5000-n mi mission.

  17. The effects of Cr, Co, Al, Mo and Ta on the cyclic oxidation behavior of a prototype cast Ni-base superalloy based on a 2(5) composite statistically designed experiment

    NASA Technical Reports Server (NTRS)

    Barrett, C. A.

    1984-01-01

    A series of cast Ni-base superalloys were systematically varied at selected levels of Co, Cr, Mo, Ta, and Al. The elemental levels varied were Mo, 0 to 4 percent; Cr, 6 to 18 percent; Co, 0 to 20 percent, Ta, 0 to 8 percent; and Al, 3.25 to 6.25 percent. The cyclic oxidation resistance was determined from specific weight change data as a function of time for 1 hr cycles in static air at 1100 C. The significant terms in decreasing order of their importance were Al, Ta, Cr2, Al-Cr, Cr-Co, Co2, Al-Mo, Cr-Mo, Al-Al, and Mo-Ta. The Al term alone accounted for close to 82 percent of the explained variability. The estimating equation showed that the Al level was the most important and should be at its 6.25 wt % maximum value. The Mo and Ta levels should also be at their maximum 4 and 8 wt % respectively. The cobalt composition should be as low as possible, i.e., 0 wt%. The Cr level optimum varies depending on the other 4 levels. The X-ray diffaction results indicate the most protective scales are alumina/aluminate spinel stabilizized with a tri-rutile oxide high in Ta and Mo.

  18. 21 CFR 582.1745 - Sodium carboxymethylcellulose.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Sodium carboxymethylcellulose. 582.1745 Section... Food Additives § 582.1745 Sodium carboxymethylcellulose. (a) Product. Sodium carboxymethyl- cellulose is the sodium salt of carboxymethylcellulose not less than 99.5 percent on a dry-weight basis, with...

  19. 21 CFR 582.1745 - Sodium carboxymethylcellulose.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Sodium carboxymethylcellulose. 582.1745 Section... Food Additives § 582.1745 Sodium carboxymethylcellulose. (a) Product. Sodium carboxymethyl- cellulose is the sodium salt of carboxymethylcellulose not less than 99.5 percent on a dry-weight basis, with...

  20. 21 CFR 582.1745 - Sodium carboxymethylcellulose.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Sodium carboxymethylcellulose. 582.1745 Section... Food Additives § 582.1745 Sodium carboxymethylcellulose. (a) Product. Sodium carboxymethyl- cellulose is the sodium salt of carboxymethylcellulose not less than 99.5 percent on a dry-weight basis, with...

  1. 21 CFR 582.1745 - Sodium carboxymethylcellulose.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Sodium carboxymethylcellulose. 582.1745 Section... Food Additives § 582.1745 Sodium carboxymethylcellulose. (a) Product. Sodium carboxymethyl- cellulose is the sodium salt of carboxymethylcellulose not less than 99.5 percent on a dry-weight basis, with...

  2. 21 CFR 582.1745 - Sodium carboxymethylcellulose.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Sodium carboxymethylcellulose. 582.1745 Section... Food Additives § 582.1745 Sodium carboxymethylcellulose. (a) Product. Sodium carboxymethyl- cellulose is the sodium salt of carboxymethylcellulose not less than 99.5 percent on a dry-weight basis, with...

  3. Atomic weights of the elements 2013 (IUPAC Technical Report)

    USGS Publications Warehouse

    Meija, Juris; Coplen, Tyler B.; Berglund, Michael; Brand, Willi A.; De Bièvre, Paul; Gröning, Manfred; Holden, Norman E.; Irrgeher, Johanna; Loss, Robert D.; Walczyk, Thomas; Prohaska, Thomas

    2016-01-01

    The biennial review of atomic-weight determinations and other cognate data has resulted in changes for the standard atomic weights of 19 elements. The standard atomic weights of four elements have been revised based on recent determinations of isotopic abundances in natural terrestrial materials:cadmium to 112.414(4) from 112.411(8),molybdenum to 95.95(1) from 95.96(2),selenium to 78.971(8) from 78.96(3), andthorium to 232.0377(4) from 232.038 06(2). The Commission on Isotopic Abundances and Atomic Weights (ciaaw.org) also revised the standard atomic weights of fifteen elements based on the 2012 Atomic Mass Evaluation:aluminium (aluminum) to 26.981 5385(7) from 26.981 5386(8),arsenic to 74.921 595(6) from 74.921 60(2),beryllium to 9.012 1831(5) from 9.012 182(3),caesium (cesium) to 132.905 451 96(6) from 132.905 4519(2),cobalt to 58.933 194(4) from 58.933 195(5),fluorine to 18.998 403 163(6) from 18.998 4032(5),gold to 196.966 569(5) from 196.966 569(4),holmium to 164.930 33(2) from 164.930 32(2),manganese to 54.938 044(3) from 54.938 045(5),niobium to 92.906 37(2) from 92.906 38(2),phosphorus to 30.973 761 998(5) from 30.973 762(2),praseodymium to 140.907 66(2) from 140.907 65(2),scandium to 44.955 908(5) from 44.955 912(6),thulium to 168.934 22(2) from 168.934 21(2), andyttrium to 88.905 84(2) from 88.905 85(2). The Commission also recommends the standard value for the natural terrestrial uranium isotope ratio, N(238U)/N(235U)=137.8(1).

  4. Aqueous flooding methods for tertiary oil recovery

    DOEpatents

    Peru, Deborah A.

    1989-01-01

    A method of aqueous flooding of subterranean oil bearing formation for tertiary oil recovery involves injecting through a well into the formation a low alkaline pH aqueous sodium bicarbonate flooding solution. The flooding solution's pH ranges from about 8.25 to 9.25 and comprises from 0.25 to 5 weight percent and preferably about 0.75 to 3.0 weight percent of sodium bicarbonate and includes a petroleum recovery surfactant of 0.05 to 1.0 weight percent and between 1 and 20 weight percent of sodium chloride. After flooding, an oil and water mixture is withdrawn from the well and the oil is separated from the oil and water mixture.

  5. Thermal stability of some aircraft turbine fuels derived from oil shale and coal

    NASA Technical Reports Server (NTRS)

    Reynolds, T. W.

    1977-01-01

    Thermal stability breakpoint temperatures are shown for 32 jet fuels prepared from oil shale and coal syncrudes by various degrees of hydrogenation. Low severity hydrotreated shale oils, with nitrogen contents of 0.1 to 0.24 weight percent, had breakpoint temperatures in the 477 to 505 K (400 to 450 F) range. Higher severity treatment, lowering nitrogen levels to 0.008 to 0.017 weight percent, resulted in breakpoint temperatures in the 505 to 533 K (450 to 500 F) range. Coal derived fuels showed generally increasing breakpoint temperatures with increasing weight percent hydrogen, fuels below 13 weight percent hydrogen having breakpoints below 533 K (500 F). Comparisons are shown with similar literature data.

  6. 76 FR 25668 - Stainless Steel Sheet and Strip in Coils From Mexico: Final Results of the Five-Year (“Sunset...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-05

    ... between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent..., aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03... or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel has...

  7. Performance of transonic fan stage with weight flow per unit annulus area of 198 kilograms per second per square meter (40.6(lb/sec)/sq ft)

    NASA Technical Reports Server (NTRS)

    Kovich, G.; Moore, R. D.; Urasek, D. C.

    1973-01-01

    The overall and blade-element performance are presented for an air compressor stage designed to study the effect of weight flow per unit annulus area on efficiency and flow range. At the design speed of 424.8 m/sec the peak efficiency of 0.81 occurred at the design weight flow and a total pressure ratio of 1.56. Design pressure ratio and weight flow were 1.57 and 29.5 kg/sec (65.0 lb/sec), respectively. Stall margin at design speed was 19 percent based on the weight flow and pressure ratio at peak efficiency and at stall.

  8. Iron Supplements Reduce Behavior Problems in Low Birth Weight Infants

    MedlinePlus

    ... low birth weight groups and the normal-weight control group. However, for behavioral problems, there was a significant ... percent of the 2-mg group. In the control group, 3.2 percent of children showed signs of ...

  9. Naturally occurring radionuclides in the ground water of southeastern Pennsylvania

    USGS Publications Warehouse

    Sloto, Ronald A.

    2000-01-01

    Naturally occurring radionuclides in the ground water of southeastern Pennsylvania may pose a health hazard to some residents, especially those drinking water from wells drilled in the Chickies Quartzite. Water from 46 percent of wells sampled in the Chickies Quartzite and 7 percent of wells sampled in other geologic formations exceeded the U.S. Environmental Protection Agency (USEPA) maximum contaminant level (MCL) for total radium. Radon-222 may pose a health problem for homeowners by contributing to indoor air radon-222 levels. The radon-222 activity of water from 89 percent of sampled wells exceeded 300 pCi/L (picocuries per liter), the proposed USEPA MCL, and water from 16 percent of sampled wells exceeded 4,000 pCi/L. Uranium does not appear to be present in elevated concentrations in ground water in southeastern Pennsylvania.

  10. Adaptive Trajectory Prediction Algorithm for Climbing Flights

    NASA Technical Reports Server (NTRS)

    Schultz, Charles Alexander; Thipphavong, David P.; Erzberger, Heinz

    2012-01-01

    Aircraft climb trajectories are difficult to predict, and large errors in these predictions reduce the potential operational benefits of some advanced features for NextGen. The algorithm described in this paper improves climb trajectory prediction accuracy by adjusting trajectory predictions based on observed track data. It utilizes rate-of-climb and airspeed measurements derived from position data to dynamically adjust the aircraft weight modeled for trajectory predictions. In simulations with weight uncertainty, the algorithm is able to adapt to within 3 percent of the actual gross weight within two minutes of the initial adaptation. The root-mean-square of altitude errors for five-minute predictions was reduced by 73 percent. Conflict detection performance also improved, with a 15 percent reduction in missed alerts and a 10 percent reduction in false alerts. In a simulation with climb speed capture intent and weight uncertainty, the algorithm improved climb trajectory prediction accuracy by up to 30 percent and conflict detection performance, reducing missed and false alerts by up to 10 percent.

  11. Droplet Core Nuclear Rocket (DCNR)

    NASA Technical Reports Server (NTRS)

    Anghaie, Samim

    1991-01-01

    The most basic design feature of the droplet core nuclear reactor is to spray liquid uranium into the core in the form of droplets on the order of five to ten microns in size, to bring the reactor to critical conditions. The liquid uranium fuel ejector is driven by hydrogen, and more hydrogen is injected from the side of the reactor to about one and a half meters from the top. High temperature hydrogen is expanded through a nozzle to produce thrust. The hydrogen pressure in the system can be somewhere between 50 and 500 atmospheres; the higher pressure is more desirable. In the lower core region, hydrogen is tangentially injected to serve two purposes: (1) to provide a swirling flow to protect the wall from impingement of hot uranium droplets: (2) to generate a vortex flow that can be used for fuel separation. The reactor is designed to maximize the energy generation in the upper region of the core. The system can result in and Isp of 2000 per second, and a thrust-to-weight ratio of 1.6 for the shielded reactor. The nuclear engine system can reduce the Mars mission duration to less than 200 days. It can reduce the hydrogen consumption by a factor of 2 to 3, which reduces the hydrogen load by about 130 to 150 metric tons.

  12. Effects of incandescent radiation on photosynthesis, growth rate and yield of 'Waldmann's Green' leaf lettuce

    NASA Technical Reports Server (NTRS)

    Knight, Sharon L.; Mitchell, Cary A.

    1988-01-01

    Effects of different ratios of incandescent (ln) to fluorescent (Fl) radiation were tested on growth of 'Waldmann's Green' leaf lettuce in a controlled environment. After 4 days of treatment, dry weight, leaf area, relative growth rate (RGR), net assimilation rate (NAR), leaf area ratio (LAR) and photosynthetic rate (Pn) were greater for plants grown at 84 rather than 16 percent of total irradiance (82 W/sq m) from ln lamps. Although leaf dry weight and area were 12-17 percent greater at 84 percent ln after the first 8 days of treatment, there were no differences in RGR or Pn between treatments during the last 4 days. If 84 percent ln was compared with 50 percent ln, all cumulative growth parameters, RGR, NAR and Pn were greater for 84 percent ln during the first 4 days of treatment. However, during the second 4 days, RGR was greater for the 50 percent ln treatment, resulting in no net difference in leaf dry weight or area between treatments. Shifting from 84 to 50 percent ln radiation between the first and second 4 days of treatment increased plant dry weight, leaf area, RGR and NAR relative to those under 84 percent ln for 8 days continuously.

  13. Colorectal cancer: intrinsic characteristics modulate cancer energy expenditure and the risk of cachexia.

    PubMed

    Ravasco, Paula; Monteiro-Grillo, Isabel; Camilo, Maria

    2007-08-01

    To conduct a prospective longitudinal study in colorectal cancer (CRC) patients: 1) to evaluate resting energy expenditure (REE), weight/dietary intake changes, and response to treatment, taking into consideration cancer stage and histology; 2) to determine their potential interrelations; and 3) to quantify the relative contributions to REE of cancer/nutrition/treatment. 101 CRC patients proposed for neoadjuvant radiotherapy (RT) were evaluated before and after RT: REE (indirect calorimetry measurements), percentage of weight loss, usual diet (diet history), current diet (24 hour recall), and treatment response. REE was higher in Stages III/IV versus I/II, at the RT onset (p < 0.002) and end (p = 0.02), and in moderately/poorly/undifferentiated cancers vs well differentiated (onset, p < 0.001) and (RT end, p = 0.01); weight/intake reductions were also greater in Stages III/IV versus I/II (p < 0.01) and in moderately/poorly/undifferentiated cancers versus well differentiated (p < 0.02). According to patients' response to treatment, REE was increased in Stage III/IV (p < 0.005) and Grade 2/3 histology (p < 0.003). In nonresponders, REE increased 7.2 +/- 1.3 kcal/kg/day and decreased 2.8 +/- 0.4 kcal/kg/day in responders. REE changes were not-significantly influenced by weight/intake. Relative contributions to baseline REE were determined in 25 percent by stage, in 25 percent by histology, in 3 percent by intake and in 4 percent by weight loss. At the end of RT, higher REE was attributed in 26 percent to stage, in 27 percent to histology, in 30 percent to nontreatment response, in 9 percent to intake, and in 8 percent to weight loss. In this CRC patient population, higher metabolic rates were mainly determined by the tumor burden and aggressiveness in association with response to treatment clearly disclaiming the effect of weight loss and/or dietary intake reductions.

  14. A 6‐month telephone‐based weight loss intervention in overweight and obese subjects with idiopathic intracranial hypertension

    PubMed Central

    Kovacs, Betty; Miller, Neil; McDermott, Michael P.; Wall, Michael; Kupersmith, Mark; Pi‐Sunyer, F. Xavier

    2016-01-01

    Summary Objectives The purpose of this paper is to measure the change in body weight after a 6‐month telephone‐based weight loss intervention in overweight and obese subjects with idiopathic intracranial hypertension (IIH) and mild visual loss randomized to receive either acetazolamide or placebo. Methods One hundred sixty‐five subjects with IIH, aged 29.1 ± 7.5 (mean ± SD) and BMI 39.9 + 8.3 kg/m2, enrolled at 38 academic and private practice sites in North America, participated in this trial. This was a randomized, double‐masked, placebo‐controlled trial of acetazolamide in subjects with IIH and mild visual loss. All participants received a reduced‐sodium, weight‐reduction diet and a 6‐month telephone‐based weight loss intervention. Six‐month changes from baseline in body weight, perimetric mean deviation as assessed by automated perimetry and quality of life using the National Eye Institute Visual Function Questionnaire 25 and the 36‐item Short Form Health Survey were measured. Results Mean percent weight change at 6 months was −5.9% ± 6.7% of initial body weight overall, −3.5% ± 5.9% in the placebo group and −7.8% ± 6.8% in the acetazolamide group. Weight change was not associated with changes in either mean deviation or quality of life scores. Conclusion Patients with IIH and mild visual loss assigned to either acetazolamide or placebo, all of whom received a 6‐month telephone‐based weight loss intervention, lost an average of 5.9% of initial body weight, consistent with NHLBI guidelines of 5% to 10% of body weight loss for clinically significant health benefit. PMID:29071096

  15. Adolescent Loss-of-Control Eating and Weight Loss Maintenance After Bariatric Surgery.

    PubMed

    Goldschmidt, Andrea B; Khoury, Jane; Jenkins, Todd M; Bond, Dale S; Thomas, J Graham; Utzinger, Linsey M; Zeller, Meg H; Inge, Thomas H; Mitchell, James E

    2018-01-01

    Loss-of-control (LOC) eating is common in adults undergoing bariatric surgery and is associated with poorer weight outcomes. Its long-term course in adolescent bariatric surgery patients and associations with weight outcomes are unclear. Adolescents ( n = 234; age range = 13-19 years) undergoing bariatric surgery across 5 US sites were assessed for postsurgery follow-up at 6 months and 1, 2, 3, and 4 years. Descriptive statistics and generalized linear mixed models were used to describe the prevalence of LOC eating episodes involving objectively large amounts of food and continuous eating, respectively. Generalized linear mixed models investigated the association of any LOC eating with short- and long-term BMI changes. At baseline, objectively large LOC eating was reported by 15.4% of adolescents, and continuous LOC eating by 27.8% of adolescents. Both forms of LOC eating were significantly lower at all postsurgical time points relative to presurgery (range = 0.5%-14.5%; P s < .05). However, both behaviors gradually increased from 6-month to 4-year follow-up ( P s < .05). Presurgical LOC eating was not related to percent BMI change over follow-up ( P = .79). However, LOC eating at 1-, 2-, and 3-year follow-up was associated with lower percent BMI change from baseline at the next consecutive assessment ( P s < .05). Although presurgical LOC eating was not related to relative weight loss after surgery, postoperative LOC eating may adversely affect long-term weight outcomes. Rates of LOC eating decreased from presurgery to 6-months postsurgery but increased thereafter. Therefore, this behavior may warrant additional empirical and clinical attention. Copyright © 2018 by the American Academy of Pediatrics.

  16. 21 CFR 558.95 - Bambermycins.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... week after date of manufacture. (c) [Reserved] (d) Conditions of use—(1) Chickens. Use in medicated... chickens: For increased rate of weight gain and improved feed efficiency Feed continuously as the sole... International Feed No. Percent Deflorinated phosphate (20.5% calcium, 18.5% phosphorus) 6-01-080 42.50 Sodium...

  17. Volumetric determination of uranium using titanous sulfate as reductant before oxidimetric titration

    USGS Publications Warehouse

    Wahlberg, James S.; Skinner, Dwight L.; Rader, Lewis F.

    1956-01-01

    A new method for determining uranium in samples containing 0.05 percent or more U3O8, using titanous sulfate as reducing agent, is much shorter, faster, and has fewer interferences than conventional methods using reductor columns. The sample is dissolved with sulfuric, nitric, perchloric, and hydrofluoric acids. Elements that would otherwise form insoluble fluorides are kept in solution by complexing the fluoride ion with boric acid. A precipitation is made with cupferron to remove interfering elements. The solution is filtered to remove the precipitated cupferrates instead of extracting them with chloroform as is usually done. Filtration is preferred to extraction because any niobium that may be in solution forms an insoluble cupferrate that may be removed by filtering but is very difficult to extract with chloroform. Excess cupferron is destroyed by oxidizing with nitric and perchloric acids, and evaporating to dense fumes of sulfuric acid. The uranium is reduced to U(IV) by the addition of titanous sulfate, with cupric sulfate used as an indicator of the completeness of the reduction. Metallic copper is formed when all the uranium is reduced. The reduced copper is then reoxidized by the addition of mercuric perchlorate, an excess of ferric sulfate added, and the solution titrated immediately with standard ceric sulfate with ferroin as an indicator. Precision of the method compared favorable with methods in common use, both for uranium ores and for most types of uranium-rich materials.

  18. Reconnaissance for radioactive deposits in the vicinity of Teller and Cape Nome, Seward Peninsula, Alaska, 1946-47

    USGS Publications Warehouse

    White, Max Gregg; West, W.S.; Matzko, J.J.

    1953-01-01

    Placer-mining areas and bedrock exposures near Teller on the Seward Peninsula, Alaska, were investigated in June and July, 1946, for possible sources of radioactive materials. The areas that were investigated are: Dese Creek, southeast of Teller; Bluestone River basin, south and southeast of Teller; Sunset Creek and other small streams flowing south into Grantley Harbor, northeast of Teller; and, also northeast of Teller, Swanson Creek and its tributaries, which flow north into the Agiapuk River basin. No significant amount of radioactive material was found, either in the stream gravels or in the bedrock of any of the areas. A heavy-mineral fraction obtained from a granite boulder probably derived from a bench gravel on Gold Run contains 0. 017 percent equivalent uranium, but the radioactivity is due to allanite and zircon. The types of bedrock tested include schist, slate, and greenstone. Readings on fresh surfaces of rock were the same as, or only slightly above the background count. The maximum radioactivity in stream concentrates is 0. 004 percent equivalent uranium in a sluice concentrate from Sunset Creek.

  19. Effects of parents' employment status on changes in body mass index and percent body fat in adolescent girls.

    PubMed

    Lee, Sunmin; Young, Deborah Rohm; Pratt, Charlotte A; Jobe, Jared B; Chae, Soo Eun; McMurray, Robert G; Johnson, Carolyn C; Going, Scott B; Elder, John P; Stevens, June

    2012-12-01

    Parents' employment status is frequently cited as a possible predictor of child weight status. Despite the importance of the topic, only a few studies have been conducted. No longitudinal studies have been conducted in the United States. A cohort of 1201 girls from the Trial of Activity for Adolescent Girls was used. Height, weight, and percent body fat (PBF) were measured at the 6th and 8th grades. Parents' employment status (measured at 6th grade) was categorized into working full time (reference), part time, unemployed, working or staying at home, and don't know. Mixed-model regression was used to reflect the hierarchical design of our study and adjusted for age, race, parents' education level, free or reduced-price school lunch status, and living arrangement. Girls whose mothers worked part time or stayed at home had a decreased risk of excess weight gain [relative risk (RR) = 0.94, 95% confidence interval (CI) 0.88, 1.00; RR = 0.89, 95% CI 0.79, 1.00, respectively] compared to girls whose mothers worked full time. Girls whose fathers were unemployed had a moderately increased risk of excess weight gain (RR = 1.13, 95% CI 1.00, 1.26) compared to girls whose fathers worked full time. Having an unemployed mother or part-time or stay-at-home father was not associated with excess weight gain. Parents' employment status was not associated with excess PBF gain. Our findings suggest that the availability of the mother has a greater influence on the weight of the daughter than the availability of the father. There is a need for a better understanding of how parents' employment status influences excess weight gain in adolescent girls.

  20. Effects of Parents' Employment Status on Changes in Body Mass Index and Percent Body Fat in Adolescent Girls

    PubMed Central

    Young, Deborah Rohm; Pratt, Charlotte A.; Jobe, Jared B.; Chae, Soo Eun; McMurray, Robert G.; Johnson, Carolyn C.; Going, Scott B.; Elder, John P.; Stevens, June

    2012-01-01

    Abstract Background Parents' employment status is frequently cited as a possible predictor of child weight status. Despite the importance of the topic, only a few studies have been conducted. No longitudinal studies have been conducted in the United States. Methods A cohort of 1201 girls from the Trial of Activity for Adolescent Girls was used. Height, weight, and percent body fat (PBF) were measured at the 6th and 8th grades. Parents' employment status (measured at 6th grade) was categorized into working full time (reference), part time, unemployed, working or staying at home, and don't know. Mixed-model regression was used to reflect the hierarchical design of our study and adjusted for age, race, parents' education level, free or reduced-price school lunch status, and living arrangement. Results Girls whose mothers worked part time or stayed at home had a decreased risk of excess weight gain [relative risk (RR)=0.94, 95% confidence interval (CI) 0.88, 1.00; RR=0.89, 95% CI 0.79, 1.00, respectively] compared to girls whose mothers worked full time. Girls whose fathers were unemployed had a moderately increased risk of excess weight gain (RR=1.13, 95% CI 1.00, 1.26) compared to girls whose fathers worked full time. Having an unemployed mother or part-time or stay-at-home father was not associated with excess weight gain. Parents' employment status was not associated with excess PBF gain. Conclusions Our findings suggest that the availability of the mother has a greater influence on the weight of the daughter than the availability of the father. There is a need for a better understanding of how parents' employment status influences excess weight gain in adolescent girls. PMID:23181918

  1. Genetic and grade and tonnage models for sandstone-hosted roll-type uranium deposits, Texas Coastal Plain, USA

    USGS Publications Warehouse

    Hall, Susan M.; Mihalasky, Mark J.; Tureck, Kathleen; Hammarstrom, Jane M.; Hannon, Mark

    2017-01-01

    The coincidence of a number of geologic and climatic factors combined to create conditions favorable for the development of mineable concentrations of uranium hosted by Eocene through Pliocene sandstones in the Texas Coastal Plain. Here 254 uranium occurrences, including 169 deposits, 73 prospects, 6 showings and 4 anomalies, have been identified. About 80 million pounds of U3O8 have been produced and about 60 million pounds of identified producible U3O8 remain in place. The development of economic roll-type uranium deposits requires a source, large-scale transport of uranium in groundwater, and deposition in reducing zones within a sedimentary sequence. The weight of the evidence supports a source from thick sequences of volcanic ash and volcaniclastic sediment derived mostly from the Trans-Pecos volcanic field and Sierra Madre Occidental that lie west of the region. The thickest accumulations of source material were deposited and preserved south and west of the San Marcos arch in the Catahoula Formation. By the early Oligocene, a formerly uniformly subtropical climate along the Gulf Coast transitioned to a zoned climate in which the southwestern portion of Texas Coastal Plain was dry, and the eastern portion humid. The more arid climate in the southwestern area supported weathering of volcanic ash source rocks during pedogenesis and early diagenesis, concentration of uranium in groundwater and movement through host sediments. During the middle Tertiary Era, abundant clastic sediments were deposited in thick sequences by bed-load dominated fluvial systems in long-lived channel complexes that provided transmissive conduits favoring transport of uranium-rich groundwater. Groundwater transported uranium through permeable sandstones that were hydrologically connected with source rocks, commonly across formation boundaries driven by isostatic loading and eustatic sea level changes. Uranium roll fronts formed as a result of the interaction of uranium-rich groundwater with either (1) organic-rich debris adjacent to large long-lived fluvial channels and barrier–bar sequences or (2) extrinsic reductants entrained in formation water or discrete gas that migrated into host units via faults and along the flanks of salt domes and shale diapirs. The southwestern portion of the region, the Rio Grande embayment, contains all the necessary factors required for roll-type uranium deposits. However, the eastern portion of the region, the Houston embayment, is challenged by a humid environment and a lack of source rock and transmissive units, which may combine to preclude the deposition of economic deposits. A grade and tonnage model for the Texas Coastal Plain shows that the Texas deposits represent a lower tonnage subset of roll-type deposits that occur around the world, and required aggregation of production centers into deposits based on geologic interpretation for the purpose of conducting a quantitative mineral resource assessment.

  2. PROCESS FOR PRODUCING URANIUM HEXAFLUORIDE

    DOEpatents

    Fowler, R.D.

    1957-10-22

    A process for the production of uranium hexafluoride from the oxides of uranium is reported. In accordance with the method the higher oxides of uranium may be reduced to uranium dioxide (UO/sub 2/), the latter converted into uranium tetrafluoride by reaction with hydrogen fluoride, and the UF/sub 4/ convented to UF/sub 6/ by reaction with a fluorinating agent. The UO/sub 3/ or U/sub 3/O/sub 8/ is placed in a reaction chamber in a copper boat or tray enclosed in a copper oven, and heated to 500 to 650 deg C while hydrogen gas is passed through the oven. The oven is then swept clean of hydrogen and the water vapor formed by means of nitrogen and then while continuing to maintain the temperature between 400 and 600 deg C, anhydrous hydrogen fluoride is passed through. After completion of the conversion to uranium tetrafluoride, the temperature of the reaction chamber is lowered to ahout 400 deg C, and elemental fluorine is used as the fluorinating agent for the conversion of UF/sub 4/ into UF/sub 6/. The fluorine gas is passed into the chamber, and the UF/sub 6/ formed passes out and is delivered to a condenser.

  3. PROCESS OF RECOVERING URANIUM FROM ITS ORES

    DOEpatents

    Galvanek, P. Jr.

    1959-02-24

    A process is presented for recovering uranium from its ores. The crushed ore is mixed with 5 to 10% of sulfuric acid and added water to about 5 to 30% of the weight of the ore. This pugged material is cured for 2 to 3 hours at 100 to 110 deg C and then cooled. The cooled mass is nitrate-conditioned by mixing with a solution equivalent to 35 pounds of ammunium nitrate and 300 pounds of water per ton of ore. The resulting pulp containing 70% or more solids is treated by upflow percolation with a 5% solution of tributyl phosphate in kerosene at a rate equivalent to a residence time of about one hour to extract the solubilized uranium. The uranium is recovered from the pregnant organic liquid by counter-current washing with water. The organic extractant may be recycled. The uranium is removed from the water solution by treating with ammonia to precipitate ammonium diuranate. The filtrate from the last step may be recycled for the nitrate-conditioning treatment.

  4. Assessing attitudes and actions of pediatric dentists toward childhood obesity and sugar-sweetened beverages.

    PubMed

    Wright, Robin; Casamassimo, Paul S

    2017-06-01

    Childhood obesity is a major US health concern, and oral health professionals have opportunities to participate in an interprofessional effort to intervene owing to their access to young patients and their abilities in addressing obesity-related dietary habits like consumption of sugar-sweetened beverages (SSBs). This study determined attitudes, behaviors, future intentions, and perceived barriers of pediatric dentists regarding efforts to prevent childhood obesity and reduce children's consumption of SSBs. The American Academy of Pediatric Dentistry conducted an online electronic survey with a convenience sample of approximately 7,450 pediatric dentists and pediatric dental residents during spring 2016. Over 17 percent of pediatric dentists offer childhood obesity interventions. Of those not providing interventions, 67 percent were interested in offering obesity-prevention services. Nearly 94 percent of pediatric dentists offer information or other interventions on consumption of SSBs. Statistically significant barriers to providing healthy weight interventions were fear of offending parents, appearing judgmental, or creating parent dissatisfaction and a lack of parental acceptance of guidance about weight management from a dentist. Significant barriers to SSB interventions were sufficient time and health professional education. More pediatric dentists stated they offer childhood obesity interventions than in previous surveys reporting 6 percent, but respondents suggested that a child's weight is seen as a medical rather than dental issue. Most pediatric dentists provide interventions related to consumption of SSBs, perceiving the issue as integral to their care of children. © 2017 American Association of Public Health Dentistry.

  5. Surface temperatures and glassy state investigations in tribology

    NASA Technical Reports Server (NTRS)

    Bair, S.; Winer, W. O.

    1980-01-01

    Measurements were made of the limiting shear stress for two naphthenic oils of differing molecular weight and three blends of the lower molecular weight oil and polymers of differing molecular weight. All reached the same limiting shear stress for the same temperature and pressure; although the polymer solutions reduced the limiting shear stress by about fifteen percent. A falling body viscometer was constructed to operate to 230 C and to 0.6 GPa and another was constructed to extend the pressure range to 1.1 GPa. A concentrated contact simulator was developed which allows recording of the traction force while the slide-roll ratio is continuously varied and the rolling speed is maintained essentially constant. Measurement of lubricant minimum film thickness of elliptical EHD contacts of various aspect ratios were made by optical interferometry. The experimental data were thirty percent greater than that predicted by the Hamrock and Dowson model. Preliminary development of the application of a scanning infrared radiation system to a tribological system was completed.

  6. Surface-Tolerant Coatings for Aircraft Hangars, Flight Control Tower, and Deluge Tanks at Fort Campbell

    DTIC Science & Technology

    2007-06-01

    to chalking. Fluorinated polymers are recognized as the most durable coatings in terms of preservation of appearance. Architectural building panels...phosphate) 19.4 Percent by Weight Film-Former phenolic varnish 55.3 Percent by Weight Antioxidant butylated hydroxytoluene (BHT) 0.43 Percent

  7. Regional Regression Equations to Estimate Flow-Duration Statistics at Ungaged Stream Sites in Connecticut

    USGS Publications Warehouse

    Ahearn, Elizabeth A.

    2010-01-01

    Multiple linear regression equations for determining flow-duration statistics were developed to estimate select flow exceedances ranging from 25- to 99-percent for six 'bioperiods'-Salmonid Spawning (November), Overwinter (December-February), Habitat Forming (March-April), Clupeid Spawning (May), Resident Spawning (June), and Rearing and Growth (July-October)-in Connecticut. Regression equations also were developed to estimate the 25- and 99-percent flow exceedances without reference to a bioperiod. In total, 32 equations were developed. The predictive equations were based on regression analyses relating flow statistics from streamgages to GIS-determined basin and climatic characteristics for the drainage areas of those streamgages. Thirty-nine streamgages (and an additional 6 short-term streamgages and 28 partial-record sites for the non-bioperiod 99-percent exceedance) in Connecticut and adjacent areas of neighboring States were used in the regression analysis. Weighted least squares regression analysis was used to determine the predictive equations; weights were assigned based on record length. The basin characteristics-drainage area, percentage of area with coarse-grained stratified deposits, percentage of area with wetlands, mean monthly precipitation (November), mean seasonal precipitation (December, January, and February), and mean basin elevation-are used as explanatory variables in the equations. Standard errors of estimate of the 32 equations ranged from 10.7 to 156 percent with medians of 19.2 and 55.4 percent to predict the 25- and 99-percent exceedances, respectively. Regression equations to estimate high and median flows (25- to 75-percent exceedances) are better predictors (smaller variability of the residual values around the regression line) than the equations to estimate low flows (less than 75-percent exceedance). The Habitat Forming (March-April) bioperiod had the smallest standard errors of estimate, ranging from 10.7 to 20.9 percent. In contrast, the Rearing and Growth (July-October) bioperiod had the largest standard errors, ranging from 30.9 to 156 percent. The adjusted coefficient of determination of the equations ranged from 77.5 to 99.4 percent with medians of 98.5 and 90.6 percent to predict the 25- and 99-percent exceedances, respectively. Descriptive information on the streamgages used in the regression, measured basin and climatic characteristics, and estimated flow-duration statistics are provided in this report. Flow-duration statistics and the 32 regression equations for estimating flow-duration statistics in Connecticut are stored on the U.S. Geological Survey World Wide Web application ?StreamStats? (http://water.usgs.gov/osw/streamstats/index.html). The regression equations developed in this report can be used to produce unbiased estimates of select flow exceedances statewide.

  8. Twice-Daily Enoxaparin among Plastic Surgery Inpatients: An Examination of Pharmacodynamics, 90-Day Venous Thromboembolism, and 90-Day Bleeding.

    PubMed

    Pannucci, Christopher J; Fleming, Kory I; Momeni, Arash; Prazak, Ann Marie; Agarwal, Jayant; Rockwell, W Bradford

    2018-06-01

    Low anti-factor Xa level, indicative of inadequate enoxaparin dosing, has a significant association with 90-day venous thromboembolism events. The authors examined the pharmacodynamics of enoxaparin 40 mg twice daily and its correlation with anti-factor Xa level, postoperative venous thromboembolism, and bleeding. Adult patients were admitted after plastic and reconstructive surgery and received enoxaparin 40 mg twice daily. Peak anti-factor Xa levels, which quantify enoxaparin's antithrombotic effect, were drawn, with a goal level of 0.2 to 0.4 IU/ml. Ninety-day symptomatic venous thromboembolism and clinically relevant bleeding were identified. The authors enrolled 118 patients who received enoxaparin 40 mg twice daily. Of these patients, 9.6 percent had low peak anti-factor Xa levels (<0.2 IU/ml), 62.6 percent had in-range peak anti-factor Xa levels (0.2 to 0.4 IU/ml), and 27.8 percent had high anti-factor Xa levels (>0.4 IU/ml). With enoxaparin 40 mg twice daily, 90.4 percent of patients received at least adequate prophylaxis. Patient weight predicted the rapidity of enoxaparin metabolism. Zero acute 90-day venous thromboembolism occurred. Eight patients (6.8 percent) had clinically relevant 90-day bleeding: clinical consequences ranged from cessation of enoxaparin prophylaxis to transfusion to operative hematoma evacuation. When enoxaparin 40 mg twice daily is provided, 90 percent of patients receive at least adequate venous thromboembolism prophylaxis (anti-factor Xa level >0.2 IU/ml). However, 27 percent of the overall population is overtreated (anti-factor Xa level >0.4 IU/ml). These pharmacodynamics data likely explain the low rate of 90-day acute venous thromboembolism (0 percent) and the high rate of clinically relevant bleeding (6.8 percent) observed. Future studies are needed to better optimize the risks and benefits of enoxaparin prophylaxis in plastic and reconstructive surgery patients. Therapeutic, IV.

  9. A Monte Carlo Analysis of Weight Data from UF 6 Cylinder Feed and Withdrawal Stations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Garner, James R; Whitaker, J Michael

    2015-01-01

    As the number of nuclear facilities handling uranium hexafluoride (UF 6) cylinders (e.g., UF 6 production, enrichment, and fuel fabrication) increase in number and throughput, more automated safeguards measures will likely be needed to enable the International Atomic Energy Agency (IAEA) to achieve its safeguards objectives in a fiscally constrained environment. Monitoring the process data from the load cells built into the cylinder feed and withdrawal (F/W) stations (i.e., cylinder weight data) can significantly increase the IAEA’s ability to efficiently achieve the fundamental safeguards task of confirming operations as declared (i.e., no undeclared activities). Researchers at the Oak Ridge Nationalmore » Laboratory, Los Alamos National Laboratory, the Joint Research Center (in Ispra, Italy), and University of Glasgow are investigating how this weight data can be used for IAEA safeguards purposes while fully protecting the operator’s proprietary and sensitive information related to operations. A key question that must be resolved is, what is the necessary frequency of recording data from the process F/W stations to achieve safeguards objectives? This paper summarizes Monte Carlo simulations of typical feed, product, and tails withdrawal cycles and evaluates longer sampling frequencies to determine the expected errors caused by low-frequency sampling and its impact on material balance calculations.« less

  10. Uranium (VI) solubility in carbonate-free ERDA-6 brine

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lucchini, Jean-francois; Khaing, Hnin; Reed, Donald T

    2010-01-01

    When present, uranium is usually an element of importance in a nuclear waste repository. In the Waste Isolation Pilot Plant (WIPP), uranium is the most prevalent actinide component by mass, with about 647 metric tons to be placed in the repository. Therefore, the chemistry of uranium, and especially its solubility in the WIPP conditions, needs to be well determined. Long-term experiments were performed to measure the solubility of uranium (VI) in carbonate-free ERDA-6 brine, a simulated WIPP brine, at pC{sub H+} values between 8 and 12.5. These data, obtained from the over-saturation approach, were the first repository-relevant data for themore » VI actinide oxidation state. The solubility trends observed pointed towards low uranium solubility in WIPP brines and a lack of amphotericity. At the expected pC{sub H+} in the WIPP ({approx} 9.5), measured uranium solubility approached 10{sup -7} M. The objective of these experiments was to establish a baseline solubility to further investigate the effects of carbonate complexation on uranium solubility in WIPP brines.« less

  11. Energy resources available to the United States, 1985 to 2000.

    PubMed

    Hayes, E T

    1979-01-19

    Energy and the gross national product have grown hand in hand at 3 to 3(1/2) percent a year for almost 40 years. Our energy growth is slowing down and will sentially level off in the 1990's. Our production of oil and gas passed a peak in the early 1970's, and there is no resource base to justify predictions of increased yields. Coal is the only fossil fuel capable of increased production. There are serious doubts that our uranium resources can support a large light-water reactor program. Finding rates for petroleum, natural gas, and uranium are less than half of what they were 20 years ago.

  12. 7 CFR 6.37 - Supersedure of Import Regulation 1, Revision 7.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16,572,178 CHEESE ARTICLES CHEESE AND SUBSTITUTES FOR CHEESE (EXCEPT: SOFT RIPENED COW'S MILK CHEESE; CHEESE NOT CONTAINING COW'S MILK; CHEESE (EXCEPT COTTAGE CHEESE) CONTAINING 0.5 PERCENT OR LESS BY WEIGHT... MILK, (ROMANO MADE FROM COW'S MILK, REGGIANO, PARMESAN, PROVOLONE, PROVOLETTI, SBRINZ, AND GOYA—NOT IN...

  13. Medicaid prospective payment: Case-mix increase

    PubMed Central

    Baker, Samuel L.; Kronenfeld, Jennie J.

    1990-01-01

    South Carolina Medicaid implemented prospective payment by diagnosis-related group (DRG) for inpatient care. The rate of complications among newborns and deliveries doubled immediately. The case-mix index for newborns increased 66.6 percent, which increased the total Medicaid hospital expenditure 5.5 percent. Outlier payments increased total expenditure further. DRG distribution change among newborns has a large impact on spending because newborn complication DRGs have high weights. States adopting a DRG-based payment system for Medicaid should anticipate a greater increase in case mix than Medicare experienced. PMID:10113463

  14. High Performance Multifunctional Corrosion Inhibitors Especially for Combining at 20 to 50 Weight Percent with Soap or Paint.

    DTIC Science & Technology

    1987-12-22

    zinc sulfate and ben- Coad Pefert i esrcent) zotriazole (BT) are also required. The alkali metal can 5 Component Broad Preferred Ingredients (percent)b...Nitrate .05 .0 .40 glucose 0.072 Silicate .002 .01 .04 smmomum sulfate 4.00 potamium phosphate 0.175 20 Phosphate .003 .005 .02MET .0061 .003 .012...potsium sulfate 0.134 tions 2 and 3 are recommended for use in aggressive solutions such as are found in the bilge areas of aircraft. FIG. 6

  15. Association between obesity and dental caries in a group of preschool children in Mexico.

    PubMed

    Vázquez-Nava, Francisco; Vázquez-Rodríguez, Eliza Mireya; Saldívar-González, Atenógenes Humberto; Lin-Ochoa, Dolores; Martinez-Perales, Gerardo Manuel; Joffre-Velázquez, Víctor Manuel

    2010-01-01

    The aim of this study was to determine the association between obesity and caries by utilizing the data of a cohort of preschool children aged 4-5 years. Data were obtained from a cohort of 1,160 children. Dental caries detection was performed according to the World Health Organization criteria. The caries index was measured as the number of decayed (d), extracted (e), and filled (f) teeth (t) (deft), or surfaces (defs). The body mass index (BMI) in units of kg/m2 was determined, and children were categorized according to age- and gender-specific criteria as normal weight (5th-85th percentile), at-risk overweight (> or = 85th-<95th percentile), and overweight (> or = 95th percentile). Odds ratios were determined for at-risk overweight and overweight children using logistic regression. The prevalence of dental caries was 17.9 percent. A slightly higher percentage of dental caries was found in boys (19.6 percent) than in girls (16.4 percent). From the total sample, the mean BMI was 17.10 +/- 3.83. Approximately 53.7 percent of children were classified as normal weight, 14.2 percent as at-risk overweight, and 32.1 percent as overweight. At-risk overweight children were higher among girls (17.1 percent) than among boys (11.3 percent). When adjusted for covariates, the logistic regression model showed that there was a significant association between at-risk overweight children (P < 0.001), overweight children (P < 0.001), and caries in the primary dentition. Mean (SD) deft value of the sample was 1.08 (2.34), while the corresponding defs value was 1.43 (3.29). Obesity appears to be associated with dental caries in the primary dentition of preschool Mexican children.

  16. 76 FR 2332 - Stainless Steel Sheet and Strip in Coils From Mexico; Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-13

    ... molybdenum, and between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0..., aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03... molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by...

  17. Aboveground Biomass of Choctawhatchee Sand Pine in Northwest Florida

    Treesearch

    Michael A. Taras

    1980-01-01

    Choctawhatchee sand pine trees 4 to 14 inches d.b.h. were selected from a natural, uneven-aged stand in northwest Florida to determine the weight and volume of above ground biomass. On the average, 85 percent of the green weight of the total tree was wood, 11 percent bark. and 4 percent needles. The average tree sampled had 82 percent of its wood in the stem and 18...

  18. Isolation and characterization of a uranium(VI)-nitride triple bond

    NASA Astrophysics Data System (ADS)

    King, David M.; Tuna, Floriana; McInnes, Eric J. L.; McMaster, Jonathan; Lewis, William; Blake, Alexander J.; Liddle, Stephen T.

    2013-06-01

    The nature and extent of covalency in uranium bonding is still unclear compared with that of transition metals, and there is great interest in studying uranium-ligand multiple bonds. Although U=O and U=NR double bonds (where R is an alkyl group) are well-known analogues to transition-metal oxo and imido complexes, the uranium(VI)-nitride triple bond has long remained a synthetic target in actinide chemistry. Here, we report the preparation of a uranium(VI)-nitride triple bond. We highlight the importance of (1) ancillary ligand design, (2) employing mild redox reactions instead of harsh photochemical methods that decompose transiently formed uranium(VI) nitrides, (3) an electrostatically stabilizing sodium ion during nitride installation, (4) selecting the right sodium sequestering reagent, (5) inner versus outer sphere oxidation and (6) stability with respect to the uranium oxidation state. Computational analyses suggest covalent contributions to U≡N triple bonds that are surprisingly comparable to those of their group 6 transition-metal nitride counterparts.

  19. Laboratory-scale uranium RF plasma confinement experiments

    NASA Technical Reports Server (NTRS)

    Roman, W. C.

    1976-01-01

    An experimental investigation was conducted using 80 kW and 1.2 MW RF induction heater facilities to aid in developing the technology necessary for designing a self-critical fissioning uranium plasma core reactor. Pure uranium hexafluoride (UF6) was injected into argon-confined, steady-state, RF-heated plasmas in different uranium plasma confinement tests to investigate the characteristics of plamas core nuclear reactors. The objectives were: (1) to confine as high a density of uranium vapor as possible within the plasma while simultaneously minimizing the uranium compound wall deposition; (2) to develop and test materials and handling techniques suitable for use with high-temperature, high-pressure gaseous UF6; and (3) to develop complementary diagnostic instrumentation and measurement techniques to characterize the uranium plasma and residue deposited on the test chamber components. In all tests, the plasma was a fluid-mechanically-confined vortex-type contained within a fused-silica cylindrical test chamber. The test chamber peripheral wall was 5.7 cm ID by 10 cm long.

  20. Assessment of skin and liver neoplasms in brown bullhead (Ameiurus nebulosus) collected at the Ashtabula River Area of Concern and associated reference site, Ohio, in 2016

    USGS Publications Warehouse

    Blazer, Vicki S.; Walsh, Heather L.; Braham, Ryan P.

    2018-05-21

    Brown bullhead (Ameiurus nebulosus) is a commonly used indicator species for tumor surveys at Great Lakes Areas of Concern. The “fish tumors or other deformities” is one of the beneficial use impairments at the Ashtabula River Area of Concern. In May 2016, 150 brown bullhead were collected in the lower Ashtabula River and 150 were collected in the nearby Conneaut Creek as a reference. Length, weight and external visible abnormalities were documented. Fish were euthanized, and skin lesions and liver tissue preserved for histopathological analyses. Otoliths were collected for age analyses. The percentage of bullhead with raised external lesions on lips, barbels and body surface was 34.7 percent at the Ashtabula River and 23.3 percent at Conneaut Creek. At the Ashtabula River, 26.7 percent of the bullhead collected had skin neoplasms, including papillomas, melanomas and squamous cell carcinomas, whereas at Conneaut Creek 18.6 percent had only papillomas, benign skin tumors. Liver neoplasms were observed in 7.3 percent of the bullhead from the Ashtabula River and 4.7 percent of those from Conneaut Creek. These neoplasms were observed in fish 6 years of age or older at both sites.

  1. 10 CFR Appendix F to Part 110 - Illustrative List of Laser-Based Enrichment Plant Equipment and Components Under NRC Export...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... come into direct contact with uranium metal vapor or liquid or with process gas consisting of UF6 or a mixture of UF6 and other gases: (1) Uranium vaporization systems (AVLIS). Especially designed or prepared... laser-based enrichment items, the materials resistant to corrosion by the vapor or liquid of uranium...

  2. 10 CFR Appendix F to Part 110 - Illustrative List of Laser-Based Enrichment Plant Equipment and Components Under NRC Export...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... come into direct contact with uranium metal vapor or liquid or with process gas consisting of UF6 or a mixture of UF6 and other gases: (1) Uranium vaporization systems (AVLIS). Especially designed or prepared... laser-based enrichment items, the materials resistant to corrosion by the vapor or liquid of uranium...

  3. 10 CFR Appendix F to Part 110 - Illustrative List of Laser-Based Enrichment Plant Equipment and Components Under NRC Export...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... come into direct contact with uranium metal vapor or liquid or with process gas consisting of UF6 or a mixture of UF6 and other gases: (1) Uranium vaporization systems (AVLIS). Especially designed or prepared... laser-based enrichment items, the materials resistant to corrosion by the vapor or liquid of uranium...

  4. 10 CFR Appendix F to Part 110 - Illustrative List of Laser-Based Enrichment Plant Equipment and Components Under NRC Export...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... come into direct contact with uranium metal vapor or liquid or with process gas consisting of UF6 or a mixture of UF6 and other gases: (1) Uranium vaporization systems (AVLIS). Especially designed or prepared... laser-based enrichment items, the materials resistant to corrosion by the vapor or liquid of uranium...

  5. 10 CFR Appendix F to Part 110 - Illustrative List of Laser-Based Enrichment Plant Equipment and Components Under NRC Export...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... come into direct contact with uranium metal vapor or liquid or with process gas consisting of UF6 or a mixture of UF6 and other gases: (1) Uranium vaporization systems (AVLIS). Especially designed or prepared... laser-based enrichment items, the materials resistant to corrosion by the vapor or liquid of uranium...

  6. Reconnaissance investigation of water quality, bottom sediment, and biota associated with irrigation drainage in the American Falls Reservoir area, Idaho, 1988-89

    USGS Publications Warehouse

    Low, Walton H.; Mullins, William H.

    1990-01-01

    Increased concern about the quality of irrigation drainage and its potential effects on human health, fish, and wildlife prompted the Department of the Interior to begin a program during late 1985 to identify irrigation-induced water-quality problems that might exist in the Western States. During `988, the Task Group on Irrigation Drainage selected the American Falls Reservoir area, Idaho, for study to determine whether potentially toxic concentrations of trace elements or organochlorine compounds existed in water, bottom sediment, and biota. The 91-square mile American Falls Reservoir has a total capacity of 1.7 million acre-feet and is used primarily for irrigation-water supply and power generation. Irrigated land upstream from the reservoir totals about 550,000 acres. Total water inflow to the reservoir is about 5.8 million acre-feet per year, of which about 63 percent is from surface-water runoff, 33 percent is from ground-water discharge, and about 4 percent is from ungaged tributaries, canals, ditches, sloughs, and precipitation. Ground-water discharge to the reservoir originates, in part, from irrigation of land upstream from and adjacent to the reservoir. The 1988 water year was a drought year, and water discharge was about 34 percent less than during 1939-88. Water samples were collected during the post-irrigation (October 1987) and irrigation (July 1988) seasons and were analyzed for major ions and trace elements. Bottom-sediment samples were collected during the irrigation season and were analyzed for trace elements and organochlorine compounds. Biota samples were collected during May, June, July, and August 1988 and were analyzed for trace elements and organochlorine compounds. Dissolved-solids concentrations in water ranged from 216 to 561 milligrams per liter. The similarity of dissolved-solids concentrations between the irrigation and post-irrigation seasons can be attributed to the large volume of ground-water discharge in the study area. Most trace-element concentrations in water were near analytical reporting limits; none exceeded State or Federal water-quality standards or criteria. Trace elements that were present at all sites in analytically detectable concentrations (in micrograms per liter) included arsenic (2 to 7), boron (40 to 130), uranium (0.7 to 3.5), vanadium (1 to 6) and zinc (less than 3 to 42). The ranges of arsenic, cadmium, and mercury concentrations in water analyzed during previous investigations. Selenium concentrations ranged from less than 1 (the reporting limit) to 6 micrograms per liter and did not exceed State of Federal water-quality standards or criteria. Concentrations of most trace elements in bottom sediment were similar to geometric mean concentrations in study area soils and were within the expected 95-percent range of concentrations in soils in the Western United States. Mercury concentrations in 9 of the 18 bottom-sediment samples exceeded the 95th-percentile concentration for mercury in area soils. Selenium concentration for selenium in area soils and, in 1 sample, exceeded the upper limit of the expected 95-percent range for selenium in Western United States soils. Most organochlorine compunds in bottom sediment were lower than analytical reporting limits. Only DDE (0.2 micrograms per kilogram) and DDT (0.3 micrograms per kilogram) were detected in bottom sediment from the Portneuf River. Except for mercury and selenium, concentrations of most trace elements in biota were not considered high enough to be harmful to humans or wildlife. Some mercury concentrations in fish exceeded the U.S. Fish and Wildlife Service National Contaminant Biomonitoring Program 85th-percentile concentration and were at levels that might not be safe for human consumption, especially for pregnant women. Elevated mercury concentrations in fish-eating waterbirds, such as double-crested cormorants, indicates biomagnification in the food chain. Selenium concentrations generally were low except in mallard livers (6.6 to 41.8 micrograms per gram, dry weight). This range is within the range of selenium concentrations (19 to 43 micrograms per gram, dry weight) reported in livers of ducks from Kesterson National Wildlife Refuge, California, where waterbird deformities, moralities, and reproductive impairment were observed. Selenium concentrations in mayfly nymphs were at or near dietary concentrations (5 to 8 micrograms per gram, dry weight) that had adverse reproductive effects on mallards during laboratory toxicity studies. p,p'DDE was detected in all waterbird eggs and juvenile mallared carcasses. Highest concentrations were in cormorant eggs (0.59 to 5.70 micrograms per gram, wet weight). p,p'DDE concentrations in four of five cormorant eggs exceeded the National Academy of Sciences, National Academy of Engineering criterion for protection of aquatic wildlife (1 microgram per gram, wet weight, for p,p'DDT and its metabolites). p,p'DDE was detected in all fish samples except rainbow trout. p,p'DDE was detected in one sample of Utah suckers. No concentrations of p,p'DDE or p,p'DDT in fish exceeded the criterion for protection of aquatic life. Total PCB's were detected in all cormorant eggs and all fish samples. PCB's were not detected in other waterbird eggs. PCB concentrations in cormorant eggs (0.28 to 1.8 micro per gram, wet weight) were lower than concentrations that would be expected to cause adverse effects. Two of the three carp samples contained PCB concntrations higher than the recommended level for protection of fish and wildlife (0.4 micrograms per gram, wet weight). Eggshell thinning was noted in cormorant and mallard eggs but was not considered great enough to cause reporductive problems. Observations of the general health of fish and waterbird populations during the study indicated that the area did not appear to have a serious contaminant problem that could be associated with irrigation grainage. No waterbird or fish die-offs were observed, and nesting waterbird populations were noted to be increasing. Selenium concentrations in mallard livers, however, are of concern, as are p,p'DDE residues in cormorant eggs.

  7. Exposure pathways and health effects associated with chemical and radiological toxicity of natural uranium: a review.

    PubMed

    Brugge, Doug; de Lemos, Jamie L; Oldmixon, Beth

    2005-01-01

    Natural uranium exposure derives from the mining, milling, and processing of uranium ore, as well as from ingestion of groundwater that is naturally contaminated with uranium. Ingestion and inhalation are the primary routes of entry into the body. Absorption of uranium from the lungs or digestive track is typically low but can vary depending on compound specific solubility. From the blood, two-thirds of the uranium is excreted in urine over the first 24 hours and up to 80% to 90% of uranium deposited in the bone leaves the body within 1.5 years. The primary health outcomes of concern documented with respect to uranium are renal, developmental, reproductive, diminished bone growth, and DNA damage. The reported health effects derive from experimental animal studies and human epidemiology. The Lowest Observed Adverse Effect Level (LOAEL) derived from animal studies is 50 microg/m3 for inhalation and 60 ug/kg body weight/day for ingestion. The current respiratory standard of the Occupational Safety and Health Administration (OSHA), 50 microg/m3, affords no margin of safety. Considering the safety factors for species and individual variation, the ingestion LOAEL corresponds to the daily consumption set by the World Health Organization Drinking Water Standard at 2 microg/L. Based on economic considerations, the United States Environmental Protection Agency maximum contaminant level is 30 microg/L. Further research is needed, with particular attention on the impact of uranium on indigenous populations, on routes of exposure in communities near uranium sites, on the combined exposures present at many uranium sites, on human developmental defects, and on health effects at or below established exposure standards.

  8. Bioaccumulation characterization of uranium by a novel Streptomyces sporoverrucosus dwc-3.

    PubMed

    Li, Xiaolong; Ding, Congcong; Liao, Jiali; Du, Liang; Sun, Qun; Yang, Jijun; Yang, Yuanyou; Zhang, Dong; Tang, Jun; Liu, Ning

    2016-03-01

    The biosorption mechanisms of uranium on an aerobic bacterial strain Streptomyces sporoverrucosus dwc-3, isolated from a potential disposal site for (ultra-)low uraniferous radioactive waste in Southwest China, were evaluated by using transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), proton induced X-ray emission (PIXE) and enhanced proton backscattering spectrometry (EPBS). Approximately 60% of total uranium at an initial concentration of 10mg/L uranium nitrate solution could be absorbed on 100mg S. sporoverrucosus dwc-3 with an adsorption capacity of more than 3.0mg/g (wet weight) after 12hr at room temperature at pH3.0. The dynamic biosorption process of S. sporoverrucosus dwc-3 for uranyl ions was well described by a pseudo second-order model. S. sporoverrucosus dwc-3 could accumulate uranium on cell walls and within the cell, as revealed by SEM and TEM analysis as well as EDX spectra. XPS and FT-IR analysis further suggested that the absorbed uranium was bound to amino, phosphate and carboxyl groups of the cells. Additionally, PIXE and EPBS results confirmed that ion exchange also contributed to the adsorption process of uranium. Copyright © 2015. Published by Elsevier B.V.

  9. Gallium Arsenide welded panel technology for advanced spaceflight applications

    NASA Technical Reports Server (NTRS)

    Lillington, D. R.; Gillanders, M. S.; Garlick, G. F. J.; Cavicchi, B. T.; Glenn, G. S.; Tobin, S. P.

    1989-01-01

    A significant impediment to the widespread use of GaAs solar cells in space is the cost and weight of the GaAs substrate. In order to overcome these problems, Spectrolab is pursuing thin cell technologies encompassing both liquid phase epitaxy (LPE) GaAs on GaAs and MOCVD GaAs on Ge cells. Spectrolab's experience in the manufacture of 4 to 6 mil 2 cm x 4 cm GaAs cells on a LPE production line is discussed. By thinning the cells at a late state of processing, production yields comparable to 12 mil cells have been achieved. Data are presented showing that GaAs cells can be welded without degradation and have achieved minimum average efficiencies of 18 percent AM0, 28 C with efficiencies up to 20 percent. Spectrolab, in conjunction with Spire Corporation has also been pursuing GaAs on Ge cell technology in support of larger area lighter weight power systems. Data are presented showing that individual 2 cm x 2 cm, 8 mil cell efficiencies up to 21.7 percent have been achieved. Efficiencies up to 24 percent AM0 will be possible by optimizing the GaAs/Ge interface. Cells have been welded without degradation using silver interconnects and have been laid down on an aluminum honeycomb/graphite facesheet substrate to produce a small coupon. The efficiency was 18.1 percent at AM0, 28 C.

  10. 21 CFR 172.841 - Polydextrose.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

  11. 21 CFR 172.841 - Polydextrose.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

  12. 21 CFR 172.841 - Polydextrose.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

  13. 21 CFR 172.841 - Polydextrose.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

  14. 40 CFR 98.63 - Calculating GHG emissions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... emissions from anode consumption during electrolysis and anode baking of prebake cells using either the.../metric tons Al). MP = Annual metal production (metric tons Al). Sa = Sulfur content in baked anode (percent weight). Asha = Ash content in baked anode (percent weight). 44/12 = Ratio of molecular weights...

  15. 40 CFR 98.63 - Calculating GHG emissions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... emissions from anode consumption during electrolysis and anode baking of prebake cells using either the.../metric tons Al). MP = Annual metal production (metric tons Al). Sa = Sulfur content in baked anode (percent weight). Asha = Ash content in baked anode (percent weight). 44/12 = Ratio of molecular weights...

  16. 40 CFR 98.63 - Calculating GHG emissions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... emissions from anode consumption during electrolysis and anode baking of prebake cells using either the.../metric tons Al). MP = Annual metal production (metric tons Al). Sa = Sulfur content in baked anode (percent weight). Asha = Ash content in baked anode (percent weight). 44/12 = Ratio of molecular weights...

  17. 40 CFR 98.63 - Calculating GHG emissions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... emissions from anode consumption during electrolysis and anode baking of prebake cells using either the.../metric tons Al). MP = Annual metal production (metric tons Al). Sa = Sulfur content in baked anode (percent weight). Asha = Ash content in baked anode (percent weight). 44/12 = Ratio of molecular weights...

  18. The water, deuterium, gas and uranium content of tektites

    USGS Publications Warehouse

    Friedman, I.

    1958-01-01

    The water content, deuterium concentration of the water, total gas and uranium contents were determined on tektite samples and other glass samples from Texas, Australia, Philippine Islands, Java, French Indo-China, Czechoslovakia, Libyan Desert, Billiton Island, Thailand, French West Africa, Peru, and New Mexico. The water content ranges from 0.24 per cent for the Peru tektite, to 0.0002 per cent for a moldavite. The majority of the tektites have less than 0.05 per cent water, and average 0.005 per cent H2O by weight. No other gases were detected, the lower detection limit being about 1 p.p.m. by weight. The deuterium content of the water in tektites is in the same range as that in terrestrial waters, and varies from 0.010 mole per cent to 0.0166 mole per cent deuterium. The uranium content is about from 1 to 3 p.p.m. The possible origin of tektites is discussed. The experimental data presented favour their being originally terrestrial, but produced by some catastrophic event. An extra-terrestrial source is not ruled out. ?? 1958.

  19. Evaporation behavior of lithium, potassium, uranium and rare earth chlorides in pyroprocessing

    NASA Astrophysics Data System (ADS)

    Jang, Junhyuk; Kim, Tackjin; Park, Sungbin; Kim, Gha-Young; Kim, Sihyoung; Lee, Sungjai

    2017-12-01

    The evaporation behaviors of Li, K, U, and rare earth (RE) chlorides were examined for the cathode process in pyroprocessing. The evaporation temperatures of the chlorides were evaluated in vacuum by measuring the weight decrease. In addition, an evaporation test up to 1473 K of the cathode process using a surrogate mixture of uranium and chlorides was conducted. It was found that LiCl evaporated more readily than the other chlorides. The weight of LiCl was rapidly decreased at temperatures above 981 K, while that of KCl was decreased above 1035 K, indicating the evaporation. UCl3 evaporated at temperatures above 1103 K. RE chlorides showed a similar evaporation behavior, evaporating first at 1158 K then rapidly evaporating at temperatures above 1230 K. Thus, the order of evaporation with increasing temperature was found to be LiCl < KCl < UCl3 < RE chlorides, with different RE chlorides evaporating at similar temperature. The surrogate test confirmed the observed evaporation trend of the chlorides during the cathode process, and revealed that the contamination of uranium remains by the back-reaction of RE chlorides is negligible.

  20. Methods of Analysis - Determination of Pyrethroid Insecticides in Water and Sediment Using Gas Chromatography/Mass Spectrometry

    USGS Publications Warehouse

    Hladik, Michelle; Smalling, Kelly L.; Kuivila, Kathryn

    2009-01-01

    A method for the determination of 14 pyrethroid insecticides in environmental water and sediment samples is described. The method was developed by the U.S. Geological Survey in response to increasing concern over the effects of pyrethroids on aquatic organisms. The pyrethroids included in this method are ones that are applied to many agricultural and urban areas. Filtered water samples are extracted for pyrethroids using solid-phase extraction (SPE) with no additional cleanup steps. Sediment and soil samples are extracted using a microwave-assisted extraction system, and the pyrethroids of interest are separated from co-extracted matrix interferences by passing the extracts through stacked graphitized carbon and alumina SPE cartridges, along with the use of high-performance liquid chromatography and gel-permeation chromatography (HPLC/GPC). Quantification of the pyrethroids from the extracted water and sediment samples is done using gas chromatography with mass spectrometry (GC/MS) or gas chromatography with tandem mass spectrometry (GC/MS/MS). Recoveries in test water samples fortified at 10 ng/L ranged from 83 to 107 percent, and recoveries in test sediment samples fortified at 10 ug/kg ranged from 82 to 101 percent; relative standard deviations ranged from 5 to 9 percent in the water samples and 3 to 9 percent in the sediment samples. Method detection limits (MDLs), calculated using U.S. Environmental Protection Agency procedures (40 CFR 136, Appendix B), in water ranged from 2.0 to 6.0 ng/L using GC/MS and 0.5 to 1.0 ng/L using GC/MS/MS. For sediment, the MDLs ranged from 1.0 to 2.6 ug/kg dry weight using GC/MS and 0.2 to 0.5 ug/kg dry weight using GC/MS/MS. The matrix-spike recoveries for each compound, when averaged for 12 environmental water samples, ranged from 84 to 96 percent, and when averaged for 27 environmental sediment samples, ranged from 88 to 100 percent.

  1. Concordance of obesity classification between body mass index and percent body fat among school children in Saudi Arabia.

    PubMed

    Al-Mohaimeed, Abdulrahman; Ahmed, Saifuddin; Dandash, Khadiga; Ismail, Mohammed Saleh; Saquib, Nazmus

    2015-03-05

    In Saudi Arabia, where childhood obesity is a major public health issue, it is important to identify the best tool for obesity classification. Hence, we compared two field methods for their usefulness in epidemiological studies. The sample consisted of 874 primary school (grade I-IV) children, aged 6-10 years, and was obtained through a multi-stage random sampling procedure. Weight and height were measured, and BMI (kg/m(2)) was calculated. Percent body fat was determined with a Futrex analyzer that uses near infrared reactance (NIR) technology. Method specific cut-off values were used for obesity classification. Sensitivity, specificity, positive and negative predictive values were determined for BMI, and the agreement between BMI and percent body fat was calculated. Compared to boys, the mean BMI was higher in girls whereas the mean percent body fat was lower (p-values < 0.0001). According to BMI, the prevalence of overweight or obesity was significantly higher in girls (34.3% vs. 17.3%); as oppose to percent body fat, which was similar between the sexes (6.6% vs. 7.0%). The sensitivity of BMI to classify overweight or obesity was high (boys = 93%, girls = 100%); and its false-positive detection rate was also high (boys = 63%, girls = 81%). The agreement rate was low between these two methods (boys = 0.48, girls =0.24). There is poor agreement in obesity classification between BMI and percent body fat, using NIR method, among Saudi school children.

  2. Study of the Deposition of Ammonium Perchlorate Following the Static Firing of MK-58 Rocket Motors

    DTIC Science & Technology

    2008-10-01

    hyperthyroidism , gas generators, electrolytes for lithium cells, and as chemical reagents. The occurrence of perchlorate in the environment is...contain 19.6 kg of cross-linked double based propellants, with 7.8 % by weight of binder, 62 % of RDX, 25.88 % of plasticizers, and a few percent...compound is present at less than 1% by weight in the propellant but it might be considered as a health hazard since it has adverse toxicological impacts

  3. Natural uranium impairs the differentiation and the resorbing function of osteoclasts.

    PubMed

    Gritsaenko, Tatiana; Pierrefite-Carle, Valérie; Lorivel, Thomas; Breuil, Véronique; Carle, Georges F; Santucci-Darmanin, Sabine

    2017-04-01

    Uranium is a naturally occurring radionuclide ubiquitously present in the environment. The skeleton is the main site of uranium long-term accumulation. While it has been shown that natural uranium is able to perturb bone metabolism through its chemical toxicity, its impact on bone resorption by osteoclasts has been poorly explored. Here, we examined for the first time in vitro effects of natural uranium on osteoclasts. The effects of uranium on the RAW 264.7 monocyte/macrophage mouse cell line and primary murine osteoclastic cells were characterized by biochemical, molecular and functional analyses. We observed a cytotoxicity effect of uranium on osteoclast precursors. Uranium concentrations in the μM range are able to inhibit osteoclast formation, mature osteoclast survival and mineral resorption but don't affect the expression of the osteoclast gene markers Nfatc1, Dc-stamp, Ctsk, Acp5, Atp6v0a3 or Atp6v0d2 in RAW 274.7 cells. Instead, we observed that uranium induces a dose-dependent accumulation of SQSTM1/p62 during osteoclastogenesis. We show here that uranium impairs osteoclast formation and function in vitro. The decrease in available precursor cells, as well as the reduced viability of mature osteoclasts appears to account for these effects of uranium. The SQSTM1/p62 level increase observed in response to uranium exposure is of particular interest since this protein is a known regulator of osteoclast formation. A tempting hypothesis discussed herein is that SQSTM1/p62 dysregulation contributes to uranium effects on osteoclastogenesis. We describe cellular and molecular effects of uranium that potentially affect bone homeostasis. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Uranium resources in the Silver Reef (Harrisburg) district, Washington County, Utah

    USGS Publications Warehouse

    Stugard, Frederick

    1951-01-01

    The Silver Reef district is near Leeds, about 16 miles north of St. George, Utah. The major structural feature of the district is the Virgin anticline, a fold extending southwestward toward St. George. The anticline has been breached by erosion, and sandstone hogbacks or 'reefs' are carved from the Shinarump conglomerate mud sandstone members of the Chinle formation, both of Triassic age. Thirteen occurrences of uranium-vanadium minerals, all within the Tecumseh sandstone, which is the upper part of the Silver Reef sandstone member of the Chinle formation, have been examined over an area about 1.75 miles wide and 3 miles long. Two shipments of uranium-vanadium ore have been produced from the Chloride Chief and Silver Point claims. Samples from the deposits contain as much as 0.94 percent U3O8. The ore contains several times as much vanadium oxide as uranium, some copper, and traces of silver. It occurs in thinly bedded cross-bedded shales and sandstones within the fluviatile Tecumseh sandstone member of the Chinle formation. The ore beds are lenticular and are localized 2 near the base, center, and top of this sandstone member. The uranium-vanadium ore contains several yellow and green minerals not yet identified; the occurrences are similar to, but not associated with, the cerargyrite ore that made the district famous from 1879 to 1909.

  5. Strontium

    USGS Publications Warehouse

    Angulo, M.A.

    2010-01-01

    In 2009, U.S. apparent consumption of strontium (contained in celestite and manufactured strontium compounds) increased to 16 kt (17,600 st) from 10.6 kt (11,700 st) in 2008, an increase of 52 percent. This increase was attributed primarily to an increase in imported celestite. Gross weight of imports totaled 25.3 kt (27,900 st), of which 91 percent came from Mexico. Imports in 2009 were 18 percent more than in 2008. Exports of strontium compounds in 2009 decreased 15 percent to 9.3 kt (10,250 st) from 10.9 kt (12,000 st) in 2008. In 2009, the U.S. Customs value of imported strontium carbonate was 65 cents/kg (29 cents/lb); for strontium nitrate, the unit value was $ 1/kg (45 cents/lb). The unit value of imported celestite, all of which was from Mexico, was about $47/t ($43/st).

  6. Depleted Uranium Uses Research and Development

    Science.gov Websites

    Documents News FAQs Internet Resources Glossary Home » DU Uses Depleted Uranium Uses Research & Uses | DUF6 Management | DUF6 Conversion Facility EISs | Documents News | FAQs | Internet Resources

  7. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fincke, J.R.; Swank, W.D.; Haggard, D.C.

    This paper describes the experimental demonstration of a process for the direct plasma reduction of depleted uranium hexafluoride to uranium metal. The process exploits the large departures from equilibrium that can be achieved in the rapid supersonic expansion of a totally dissociated and partially ionized mixture of UF{sub 6}, Ar, He, and H{sub 2}. The process is based on the rapid condensation of subcooled uranium vapor and the relatively slow rate of back reaction between metallic uranium and HF to F{sub 2} to reform stable fluorides. The high translational velocities and rapid cooling result in an overpopulation of atomic hydrogenmore » which persists throughout the expansion process. Atomic hydrogen shifts the equilibrium composition by inhibiting the reformation of uranium-fluorine compounds. This process has the potential to reduce the cost of reducing UF{sub 6} to uranium metal with the added benefit of being a virtually waste free process. The dry HF produced is a commodity which has industrial value.« less

  8. Status and understanding of groundwater quality in the two southern San Joaquin Valley study units, 2005-2006 - California GAMA Priority Basin Project

    USGS Publications Warehouse

    Burton, Carmen A.; Shelton, Jennifer L.; Belitz, Kenneth

    2012-01-01

    Groundwater quality in the southern San Joaquin Valley was investigated from October 2005 through March 2006 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin Project is conducted by the U.S. Geological Survey (USGS) in collaboration with the California State Water Resources Control Board and the Lawrence Livermore National Laboratory. There are two study units located in the southern San Joaquin Valley: the Southeast San Joaquin Valley (SESJ) study unit and the Kern County Subbasin (KERN) study unit. The GAMA Priority Basin Project in the SESJ and KERN study units was designed to provide a statistically unbiased, spatially distributed assessment of untreated groundwater quality within the primary aquifers. The status assessment is based on water-quality and ancillary data collected in 2005 and 2006 by the USGS from 130 wells on a spatially distributed grid, and water-quality data from the California Department of Public Health (CDPH) database. Data was collected from an additional 19 wells for the understanding assessment. The aquifer systems (hereinafter referred to as primary aquifers) were defined as that part of the aquifer corresponding to the perforation interval of wells listed in the CDPH database for the SESJ and KERN study units. The status assessment of groundwater quality used data from samples analyzed for anthropogenic constituents such as volatile organic compounds (VOCs) and pesticides, as well as naturally occurring inorganic constituents such as major ions and trace elements. The status assessment is intended to characterize the quality of untreated groundwater resources within the primary aquifers in the SESJ and KERN study units, not the quality of drinking water delivered to consumers. Although the status assessment applies to untreated groundwater, Federal and California regulatory and non-regulatory water-quality benchmarks that apply to drinking water are used to provide context for the results. Relative-concentrations (sample concentration divided by benchmark concentration) were used for evaluating groundwater. A relative-concentration greater than 1.0 indicates a concentration greater than the benchmark and is classified as high. The relative-concentration threshold for classifying inorganic constituents as moderate or low was 0.5; for organic constituents the threshold between moderate and low was 0.1. Aquifer-scale proportion was used as the primary metric for assessing the quality of untreated groundwater for the study units. High aquifer-scale proportion is defined as the areal percentage of the primary aquifers with a high relative-concentration for a particular constituent or class of constituents. Moderate and low aquifer-scale proportions were defined as the areal percentage of the primary aquifers with moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable for the two study units in the southern San Joaquin Valley (within 90 percent confidence intervals). The status assessment showed that inorganic constituents were more prevalent than organic constituents and that relative-concentrations were higher for inorganic constituents than for organic constituents. For inorganic constituents with human-health benchmarks, the relative-concentration of at least one constituent in the SESJ study unit was high in 30 percent of the primary aquifers. In the KERN study unit, the relative-concentration of at least one constituent was high in 23 percent of the primary aquifers. In the SESJ and KERN study units, the inorganic constituents with human-health benchmarks detected at high relative-concentrations in more than 2 percent of the primary aquifers were arsenic, boron, vanadium, nitrate, uranium, and gross alpha radioactivity. Additional constituents with human-health benchmarks—antimony, radium, and fluoride—were detected at high relative-concentrations in the KERN study unit. For inorganic constituents with aesthetic benchmarks (secondary maximum contaminant levels, SMCLs), the relative-concentration of at least one constituent in the SESJ study unit was high in 6.6 percent of the primary aquifers. In the KERN study unit, the relative-concentration of at least one constituent was high in 22 percent of the primary aquifers. Inorganic constituents with aesthetic benchmarks detected at high relative-concentrations in the primary aquifers in the SESJ and KERN study units were iron and manganese. Additional constituents with aesthetic benchmarks—total dissolved solids (TDS), sulfate, and chloride—were detected at high relative-concentrations in the KERN study unit. In contrast, the status assessment for organic constituents with human-health benchmarks showed that relative-concentrations were high in 4.8 percent and 2.1 percent of the primary aquifers in the SESJ and KERN study units, respectively. The special-interest constituent, perchlorate, was detected at high relative-concentrations in 1.2 percent of the primary aquifers in the SESJ study unit. Twenty-eight of the 78 VOCs (not including fumigants) analyzed were detected. Of these 28 VOCs, benzene had high relative-concentrations in the SESJ study unit, and relative-concentrations for the other 27 VOCs were moderate and low. Five of the 10 fumigants were detected; 1,2-dibromo-3-chloropropane (DBCP) was the only fumigant with high relative-concentrations in the SESJ and KERN study units. Of the 136 pesticides and pesticide degradates analyzed, 33 were detected. Human-health benchmarks were established for eighteen of the detected pesticides. Dieldrin was detected at moderate relative-concentrations in the SESJ and KERN study units. All other pesticides detected with human-health benchmarks were present at low relative-concentrations. The detection frequencies for two of these pesticides—simazine and atrazine—were greater than or equal to 10 percent in the SESJ and KERN study units. The understanding assessment of groundwater quality included an analysis of correlations of selected water-quality constituents or classes of constituents with potential explanatory factors. The understanding assessment indicated that the concentrations of many trace elements and major ions were correlated to well depth, groundwater age, and/or geochemical conditions. Many trace elements were positively correlated with depth. Arsenic, boron, vanadium, fluoride, manganese, and iron concentrations increased with well depth or depth to top-of-perforations. The concentrations for these trace elements also were higher in older (pre-modern) groundwater. In contrast, uranium concentrations decreased with increasing depth and groundwater age. Most trace elements were correlated to geochemical conditions. Arsenic, antimony, boron, fluoride, manganese, and iron concentrations generally were higher wherever the pH of the groundwater was greater than 7.6. Concentrations for these constituents generally were higher at low concentrations of dissolved oxygen (DO). Uranium was the exception; uranium concentrations generally were lower at high pH and at high concentrations of DO. Nitrate concentrations generally were lower in deeper wells. Nitrate concentrations also were higher in groundwater with higher DO. Total dissolved solids, sulfate, and chloride concentrations were higher in the KERN study unit than in the SESJ study unit. Total dissolved solids were negatively correlated with pH in the KERN study unit. Total dissolved solids and sulfate were higher in areas with more agricultural land use. Chloride concentrations increased with depth to top-of-perforations in the KERN study unit. Organic constituents and constituents of special interest, like many inorganic constituents, were correlated with well depth, groundwater age, and DO. Unlike most trace elements, however, solvent and pesticide detections, and total trihalomethanes (THM), DBCP, and perchlorate concentrations decreased with increasing well depth. Volatile organic compound, solvent, and pesticide detections, and THM concentrations also were lower in older (pre-modern) groundwater than in modern-age groundwater. Solvent detections and total THM, DBCP, and perchlorate concentrations increased with increasing DO concentrations.

  9. A new real-time visual assessment method for faulty movement patterns during a jump-landing task.

    PubMed

    Rabin, Alon; Levi, Ran; Abramowitz, Shai; Kozol, Zvi

    2016-07-01

    Determine the interrater reliability of a new real-time assessment of faulty movement patterns during a jump-landing task. Interrater reliability study. Human movement laboratory. 50 healthy females. Assessment included 6 items which were evaluated from a front and a side view. Two Physical Therapy students used a 9-point scale (0-8) to independently rate the quality of movement as good (0-2), moderate (3-5), or poor (6-8). Interrater reliability was expressed by percent agreement and weighted kappa. One examiner rated the quality of movement of 6 subjects as good, 34 subjects as moderate, and 10 subjects as poor. The second examiner rated the quality of movement of 12 subjects as good, 23 subjects as moderate, and 15 subjects as poor. Percent agreement and weighted kappa (95% confidence interval) were 78% and 0.68 (0.51, 0.85), respectively. A new real-time assessment of faulty movement patterns during jump-landing demonstrated adequate interrater reliability. Further study is warranted to validate this method against a motion analysis system, as well as to establish its predictive validity for injury. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. METHOD OF DISSOLVING REFRACTORY ALLOYS

    DOEpatents

    Helton, D.M.; Savolainen, J.K.

    1963-04-23

    This patent relates to the dissolution of alloys of uranium with zirconium, thorium, molybdenum, or niobium. The alloy is contacted with an anhydrous solution of mercuric chloride in a low-molecular-weight monohydric alcohol to produce a mercury-containing alcohol slurry. The slurry is then converted to an aqueous system by adding water and driving off the alcohol. The resulting aqueous slurry is electrolyzed in the presence of a mercury cathode to remove the mercury and produce a uranium-bearing aqueous solution. This process is useful for dissolving irradiated nuclear reactor fuels for radiochemical reprocessing by solvent extraction. In addition, zirconium-alloy cladding is selectively removed from uranium dioxide fuel compacts by this means. (AEC)

  11. Thermodynamic properties of UF sub 6 measured with a ballistic piston compressor

    NASA Technical Reports Server (NTRS)

    Sterritt, D. E.; Lalos, G. T.; Schneider, R. T.

    1973-01-01

    From experiments performed with a ballistic piston compressor, certain thermodynamic properties of uranium hexafluoride were investigated. Difficulties presented by the nonideal processes encountered in ballistic compressors are discussed and a computer code BCCC (Ballistic Compressor Computer Code) is developed to analyze the experimental data. The BCCC unfolds the thermodynamic properties of uranium hexafluoride from the helium-uranium hexafluoride mixture used as the test gas in the ballistic compressor. The thermodynamic properties deduced include the specific heat at constant volume, the ratio of specific heats for UF6, and the viscous coupling constant of helium-uranium hexafluoride mixtures.

  12. 21 CFR 173.65 - Divinylbenzene copolymer.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... weight-percent ethyl-vinyl-benzene, and no more than 4 weight-percent nonpolymerizable impurities. (b) In... Archives and Records Administration (NARA). For information on the availability of this material at NARA...

  13. Process for alloying uranium and niobium

    DOEpatents

    Holcombe, Cressie E.; Northcutt, Jr., Walter G.; Masters, David R.; Chapman, Lloyd R.

    1991-01-01

    Alloys such as U-6Nb are prepared by forming a stacked sandwich array of uraniun sheets and niobium powder disposed in layers between the sheets, heating the array in a vacuum induction melting furnace to a temperature such as to melt the uranium, holding the resulting mixture at a temperature above the melting point of uranium until the niobium dissolves in the uranium, and casting the uranium-niobium solution. Compositional uniformity in the alloy product is enabled by use of the sandwich structure of uranium sheets and niobium powder.

  14. Postpartum weight retention and breastfeeding among obese women from the randomized controlled Lifestyle in Pregnancy (LiP) trial.

    PubMed

    Vinter, Christina Anne; Jensen, Dorte Møller; Ovesen, Per; Beck-Nielsen, Henning; Tanvig, Mette; Lamont, Ronald F; Jørgensen, Jan Stener

    2014-08-01

    To study the effects of lifestyle intervention in pregnancy on weight retention 6 months postpartum among obese women from the "Lifestyle in Pregnancy" (LiP) study, and to determine associations between breastfeeding with postpartum maternal weight. Six months postpartum follow up after a randomized controlled intervention trial. Two university hospitals in Denmark. A total of 360 women with pregestational body mass index ≥30 kg/m(2) . The intervention involved lifestyle changes (diet and exercise) during pregnancy. The control group received routine pregnancy care. Both groups received standard postnatal care. Gestational weight gain, postpartum weight retention and breastfeeding. Follow up was completed in 238 women of whom 46% in the intervention group and 57% in the control group had retained weight 6 months postpartum (p = 0.088). Women with gestational weight gain ≤9 kg, (recommended by the Institute of Medicine), retained less postpartum weight compared with those who exceeded 9 kg (median -0.7 vs. 1.5, p < 0.001). Ninety-two percent in both weight gain groups initiated breastfeeding. The number of breastfeeding mothers was higher among women with postpartum weight retention ≤5 kg compared with those with weight retention > 5 kg (94% vs. 85%, p = 0.034). We could not detect sustained weight control at 6 months postpartum despite a lower gestational weight gain for obese women during pregnancy who received a lifestyle intervention rather than standard care. Women who adhered to gestational weight gain recommendations had significantly lower postpartum weight retention. Breastfeeding for 6 months was negatively associated with postpartum weight retention. © 2014 Nordic Federation of Societies of Obstetrics and Gynecology.

  15. 40 CFR 98.63 - Calculating GHG emissions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... baking of prebake cells using either the procedures in paragraph (d) of this section or the procedures in.../metric tons Al). MP = Annual metal production (metric tons Al). Sa = Sulfur content in baked anode (percent weight). Asha = Ash content in baked anode (percent weight). 44/12 = Ratio of molecular weights...

  16. Space Shuttle inflight and postflight fluid shifts measured by leg volume changes

    NASA Technical Reports Server (NTRS)

    Moore, Thomas P.; Thornton, William E.

    1987-01-01

    This is a study of the inflight and postflight leg volume changes associated with spaceflight on Space Shuttle missions. The results show an inflight volume loss of 2 l from the lower extremities, 1 l from each leg, representing an 11.6 percent volume change. The vast majority of this change appears to be a shift in body fluids, both intravascular and extravascular. The fluid shift occurs mostly on Mission Day One and is essentially complete by 6 to 10 hr. The regional origin of shift and leg volume changes shows a far greater absolute volume (708 ml vs. 318 ml) and percentage (69 percent vs. 31 percent) of the total change coming from the higher as compared to the lower leg. Postflight, the return of fluid to the lower extremities occurs rapidly with the majority of volume return complete within 1.5 hr postlanding. At 1 week postflight, there is a residual leg volume decrement of 283 ml or 3.2 percent that is probably due to tissue loss secondary to atrophic deconditioning and weight loss.

  17. Relation between vegetarian/nonvegetarian diets and blood pressure in black and white adults.

    PubMed Central

    Melby, C L; Goldflies, D G; Hyner, G C; Lyle, R M

    1989-01-01

    We examined the possible interaction of race and diet on blood pressure (BP) in volunteer Black Seventh Day Adventists compared to volunteer White church members. Height, weight, waist and hip circumference, and resting seated BP were recorded in Black vegetarians (n = 55; age: 54.7 +/- 16.9 yrs), Black nonvegetarians (n = 59; 56.1 +/- 14.1 yrs), White vegetarians (n = 164; 52.2 +/- 16.7 yrs), and White nonvegetarians (n = 100; 52.6 +/- 15.6 yrs) attending a regional conference. Forty-four percent of the Black nonvegetarians were medicated hypertensives, compared to only 18 percent of the Black vegetarians, 7 percent of the White vegetarians, and 22 percent of the White nonvegetarians. Black vegetarians exhibited lower age and sex-adjusted systolic BP (means = 122.9/74.4 mm Hg) than Black nonvegetarians (means = 132.2/75.9 mm Hg). After further adjusting BP for body mass index and waist/hip ratio, the systolic BP among Black vegetarians remained lower (122.8) than Black nonvegetarians (129.7) but higher than that of the Whites who showed no diet-related BP differences. PMID:2764208

  18. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Siekhaus, W. J.; Teslich, N. E.; Weber, P. K.

    Depleted uranium that included carbide inclusions was sputtered with 30-keV gallium ions or 16-kev cesium ions to depths much greater than the ions’ range, i.e. using steady-state sputtering. The recession of both the uranium’s and uranium carbide’s surfaces and the ion corresponding fluences were used to determine the steady-state target sputtering yields of both uranium and uranium carbide, i.e. 6.3 atoms of uranium and 2.4 units of uranium carbide eroded per gallium ion, and 9.9 uranium atoms and 3.65 units of uranium carbide eroded by cesium ions. The steady state surface composition resulting from the simultaneous gallium or cesium implantationmore » and sputter-erosion of uranium and uranium carbide were calculated to be U₈₆Ga₁₄, (UC)₇₀Ga₃₀ and U₈₁Cs₉, (UC)₇₉Cs₂₁, respectively.« less

  19. Advanced photovoltaic power systems using tandem GaAs/GaSb concentrator modules

    NASA Technical Reports Server (NTRS)

    Fraas, L. M.; Kuryla, M. S.; Pietila, D. A.; Sundaram, V. S.; Gruenbaum, P. E.; Avery, J. E.; Dihn, V.; Ballantyne, R.; Samuel, C.

    1992-01-01

    In 1989, Boeing announced the fabrication of a tandem gallium concentrator solar cell with an energy conversion efficiency of 30 percent. This research breakthrough has now led to panels which are significantly smaller, lighter, more radiation resistant, and potentially less expensive than the traditional silicon flat plate electric power supply. The new Boeing tandem concentrator (BTC) module uses an array of lightweight silicone Fresnel lenses mounted on the front side of a light weight aluminum honeycomb structure to focus sunlight onto small area solar cells mounted on a thin back plane. This module design is shown schematically. The tandem solar cell in this new module consists of a gallium arsenide light sensitive cell with a 24 percent energy conversion efficiency stacked on top of a gallium antimonide infrared sensitive cell with a conversion efficiency of 6 percent. This gives a total efficiency 30 percent for the cell-stack. The lens optical efficiency is typically 85 percent. Discounting for efficiency losses associated with lens packing, cell wiring, and cell operating temperature still allows for a module efficiency of 22 percent which leads to a module power density of 300 Watts/sq. m. This performance provides more than twice the power density available from a single crystal silicon flat plate module and at least four times the power density available from amorphous silicon modules. The fact that the lenses are only 0.010 ft. thick and the aluminum foil back plane is only 0.003 ft. thick leads to a very lightweight module. Although the cells are an easy to handle thickness of 0.020 ft., the fact that they are small, occupying one-twenty-fifth of the module area, means that they add little to the module weight. After summing all the module weights and given the high module power, we find that we are able to fabricate BTC modules with specific power of 100 watts/kg.

  20. A study of radioactivity in modern stream gravels and its possible application as a prospecting method

    USGS Publications Warehouse

    Chew, Randall T.

    1955-01-01

    Traverses along some streams of the Colorado Plateau in areas known to contain minable uranium deposits show that anomalous radiation in the stream gravels can be detected with a suitable counter downstream from the deposits. The amount of radiation is influenced by the size of the uranium deposit, the size of the drainage area of the stream, the grain size of the sediments, and the lithology of the rocks over which the stream flows. The spacing of the stations where readings are taken is controlled by the size of the stream, and special readings are also taken directly downstream from important tributaries. An anomaly is empirically defined as a 10 percent rise over background. Radioactive material from large uranium deposits has been detected as much as 1 mile downstream. Radioactive material from smaller deposits is detachable over shorter distances. The method is slow but appears to be a useful prospecting tool under restricted conditions.

Top