On the problem of boundaries and scaling for urban street networks.

PubMed

Masucci, A Paolo; Arcaute, Elsa; Hatna, Erez; Stanilov, Kiril; Batty, Michael

2015-10-06

Urban morphology has presented significant intellectual challenges to mathematicians and physicists ever since the eighteenth century, when Euler first explored the famous Königsberg bridges problem. Many important regularities and scaling laws have been observed in urban studies, including Zipf's law and Gibrat's law, rendering cities attractive systems for analysis within statistical physics. Nevertheless, a broad consensus on how cities and their boundaries are defined is still lacking. Applying an elementary clustering technique to the street intersection space, we show that growth curves for the maximum cluster size of the largest cities in the UK and in California collapse to a single curve, namely the logistic. Subsequently, by introducing the concept of the condensation threshold, we show that natural boundaries of cities can be well defined in a universal way. This allows us to study and discuss systematically some of the regularities that are present in cities. We show that some scaling laws present consistent behaviour in space and time, thus suggesting the presence of common principles at the basis of the evolution of urban systems. © 2015 The Authors.

Mapping and analyzing change of impervious surface for two decades using multi-temporal Landsat imagery in Missouri

NASA Astrophysics Data System (ADS)

Zhou, Bo; He, Hong S.; Nigh, Timothy A.; Schulz, John H.

2012-08-01

Human population growth and associated sprawl has rapidly converted open lands to developed use and affected their distinctive ecological characteristics. Missouri reflects a full range of sprawl characteristics that include large metropolitan centers, which led growth in 1980s, and smaller metropolitan and rural areas, which led growth in 1990s. In order to study the historical patterns of sprawl, there is a need to quantitatively and geographically depict the extent and density of impervious surface for three time periods of 1980, 1990, and 2000 for the entire state of Missouri. We mapped impervious surface using Sub-pixel Classifier™, an add-on module of Erdas Imagine for the three time periods, where impervious surface growth was derived as the subtraction of impervious surface mapped from the different time periods. Accuracy assessment was performed by comparing satellite derived impervious surface images with ground-truth acquired from high resolution air photos. Results show that during 1980-2000, 129,853 ha of land were converted to impervious surface. Sprawl was prominent on urban fringe (within the urban boundaries) during 1980s with 23,674 ha of land converted to impervious surface compared to 22,918 ha in 1990s. There was a temporal shift in the rural landscapes (outside the urban boundaries) in the 1990s with 48,079 ha of land converted to impervious surface compared to 35,180 ha in 1980s. Major findings based on analysis of the impervious surface growth include: (i) new growth of impervious surfaces are concentrated on areas with 0.5-1.0% road cover; (ii) most new growths are either inside or close to urban watersheds; and (iii) most new growths are either inside or close to counties with metropolitan cities. This research goes beyond the usual hot spots of metropolitan areas to include rural landscapes where negative impact was exerted to the ecosystem due to the low density development and larger affected areas.

Sensitivity of precipitation statistics to urban growth in a subtropical coastal megacity cluster.

PubMed

Holst, Christopher Claus; Chan, Johnny C L; Tam, Chi-Yung

2017-09-01

This short paper presents an investigation on how human activities may or may not affect precipitation based on numerical simulations of precipitation in a benchmark case with modified lower boundary conditions, representing different stages of urban development in the model. The results indicate that certain degrees of urbanization affect the likelihood of heavy precipitation significantly, while less urbanized or smaller cities are much less prone to these effects. Such a result can be explained based on our previous work where the sensitivity of precipitation statistics to surface anthropogenic heat sources lies in the generation of buoyancy and turbulence in the planetary boundary layer and dissipation through triggering of convection. Thus only mega cities of sufficient size, and hence human-activity-related anthropogenic heat emission, can expect to experience such effects. In other words, as cities grow, their effects upon precipitation appear to grow as well. Copyright © 2017. Published by Elsevier B.V.

Six decades of urban growth using remote sensing and GIS in the city of Bandar Abbas, Iran

NASA Astrophysics Data System (ADS)

Dadras, Mohsen; Zulhaidi Mohd Shafri, Helmi; Ahmad, Noordin; Pradhan, Biswajeet; Safarpour, Sahabeh

2014-06-01

Bandar Abbas is the capital city of Hormozgan province, is the south of Iran. The city has witnessed rapid growth in the last three decades, mostly because of its economic, commercial and social attractions. However, forms and operations of urban sprawl may vary in important manners according to determine geographical and historical characteristics, and these difference need to be reviewed with creation geodatabase of spatial and attribute data during past periods until now of urban formation and expansion. We implemented this research to understand Bandar Abbas city growth dynamic during last six decades using aerial photo, Remote Sensing (RS) data and Geographical Information System (GIS), to investigate its sprawl for the during six decades and to prepare a basis for urban planning and management. We calibrated it with geospatial data derived from a time series of aerial photos and satellite images. Treated remote sensing data covering the six decades were used to calculate land use/cover and urban growth. The application of classification techniques to the remote sensing data enabled the extraction of eight main types of land use: agricultural, barren, coastal, hole, river, rocky hill, urban, and built-up. Growth was calculated through Shannon's entropy model. The urbanized area increased from 403.77 ha to 4959.59 ha from 1956 to 2012, a rate almost five times that of the population growth observed in the same period. Such findings make the case of Bandar Abbas important for several reasons. First, Bandar Abbas has undergone a rapid increase in urban sprawl according to urban growth indicators. Second, the urban sprawl quickly grew from medium-sized to large a process considered inappropriate according to physical and structural limitations on urban growth. Lastly, the excessive extension of the built-up boundary in the city resulted in the loss of coastal land and open space, two main sources of tourist attraction and economic sustainable development.

Stable Stratification Effects on Flow and Pollutant Dispersion in Boundary Layers Entering a Generic Urban Environment

NASA Astrophysics Data System (ADS)

Tomas, J. M.; Pourquie, M. J. B. M.; Jonker, H. J. J.

2016-05-01

Large-eddy simulations (LES) are used to investigate the effect of stable stratification on rural-to-urban roughness transitions. Smooth-wall turbulent boundary layers are subjected to a generic urban roughness consisting of cubes in an in-line arrangement. Two line sources of pollutant are added to investigate the effect on pollutant dispersion. Firstly, the LES method is validated with data from wind-tunnel experiments on fully-developed flow over cubical roughness. Good agreement is found for the vertical profiles of the mean streamwise velocity component and mean Reynolds stress. Subsequently, roughness transition simulations are done for both neutral and stable conditions. Results are compared with fully-developed simulations with conventional double-periodic boundary conditions. In stable conditions, at the end of the domain the streamwise velocity component has not yet reached the fully-developed state even though the surface forces are nearly constant. Moreover, the internal boundary layer is shallower than in the neutral case. Furthermore, an investigation of the turbulence kinetic energy budget shows that the buoyancy destruction term is reduced in the internal boundary layer, above which it is equal to the undisturbed (smooth wall) value. In addition, in stable conditions pollutants emitted above the urban canopy enter the canopy farther downstream due to decreased vertical mixing. Pollutants emitted below the top of the urban canopy are 85 % higher in concentration in stable conditions mostly due to decreased advection. If this is taken into account concentrations remain 17 % greater in stable conditions due to less rapid internal boundary-layer growth. Finally, it is concluded that in the first seven streets the vertical advective pollutant flux is significant, in contrast to the fully-developed case.

How does Innovation Push its Boundaries?

NASA Astrophysics Data System (ADS)

Youn, Hyejin

Urbanization and innovation are the most defining characteristics of our societal challenge. On one hand, ever-expanding urban built environments are centers of population growth, economic engine, and energy consumption. On the other hand, our technology advances increasingly rapidly, transforming both physical and social infrastructures into better or worse contingency. Therefore, understanding their fundamental dynamics can provide valuable insight into the nature of challenges of sustainability...

Nineteenth Century Harbors: Accounting for Coastal Urban Development in Hydrologic Change

NASA Astrophysics Data System (ADS)

Schlichting, K. M.; Ruffing, C. M.; McCormack, S. M.; Urbanova, T.; Powell, L. J.; Hermans, C. M.

2009-12-01

Harbors complicate the analytical framework of quantifying nineteenth-century hydrologic change in the northeastern United States. The hydrology of the region was fundamentally altered by the growth of water engineering such as canals as well as by land cover changes as deforestation in the region peaked and urban centers grew. Urban coastal growth epitomized nineteenth-century development as northeastern colonial ports evolved into manufacturing and industrial centers. Coastal urban industrial development concentrated tanneries, machineries, and paper processing companies along cities’ trading rivers. Additionally, the populations of cities such as Boston, New Haven, New York, Newark, and Baltimore reached unprecedented numbers, forcing urban municipalities to confront sewerage and drinking water infrastructure in the face of shortages and waterborne disease. We discuss how the concentration of industry and population at river mouths complicates the process of quantifying the effects of municipal drinking water and sewage infrastructure on regional hydrology and how the growth of nineteenth-century urban centers shaped regional hydrologic hinterlands. Additionally, harbors oblige a reconsideration of hydrologic boundaries by forcing hydrologists and environmental historians to account for fisheries and harbor engineering alongside population and industry as factors in changes to water quality and quantity in and human response to urban nineteenth-century hydrologic change.

Investigating the vertical dimension of Singapore's urban heat island through quadcopter platforms: an pilot study

NASA Astrophysics Data System (ADS)

Chow, Winston; Ho, Dawn

2016-04-01

In numerous cities, measurements of urban warmth in most urban heat island (UHI) studies are generally constrained towards surface or near-surface (<2 m above surface level) levels across horizontal variations in land use and land cover. However, there has been hitherto limited attention towards the measurement of vertical temperature profiles extending from the urban surface, urban canopy layer through to the urban boundary layer. Knowledge of these profiles, through (a.) how they vary over different local urban morphologies, and (b.) develop with respect to synoptic meteorological conditions, are important towards several aspects of UHI research; these include validating modelling urban canopy lapse rate profiles or estimating the growth of urban plumes. In this novel study, we utilised temperature sensor-loggers attached onto remote controlled aerial quadcopter platforms to measure urban temperature profiles up to 100 m above ground level in Singapore, which is a rapidly urbanizing major tropical metropolis. Three different land use/land cover categories were sampled; a high-rise residential estate, a university campus, and an urban park/green-space. Sorties were flown repeatedly at four different times - sunrise, noon, sunset and midnight. Initial results indicate significant variations in intra-site stability and inversion development between the urban canopy and boundary layers. These profiles are also temporally dynamic, depending on the time of day and larger-scale weather conditions.

Early urban impact on Mediterranean coastal environments

NASA Astrophysics Data System (ADS)

Kaniewski, David; van Campo, Elise; Morhange, Christophe; Guiot, Joël; Zviely, Dov; Shaked, Idan; Otto, Thierry; Artzy, Michal

2013-12-01

A common belief is that, unlike today, ancient urban areas developed in a sustainable way within the environmental limits of local natural resources and the ecosystem's capacity to respond. This long-held paradigm is based on a weak knowledge of the processes underpinning the emergence of urban life and the rise of an urban-adapted environment in and beyond city boundaries. Here, we report a 6000-year record of environmental changes around the port city of Akko (Acre), Israel, to analyse ecological processes and patterns stemming from the emergence and growth of urban life. We show that early urban development deeply transformed pre-existing ecosystems, swiftly leading to an urban environment already governed by its own ecological rules and this, since the emergence of the cities.

Early urban impact on Mediterranean coastal environments

PubMed Central

Kaniewski, David; Van Campo, Elise; Morhange, Christophe; Guiot, Joël; Zviely, Dov; Shaked, Idan; Otto, Thierry; Artzy, Michal

2013-01-01

A common belief is that, unlike today, ancient urban areas developed in a sustainable way within the environmental limits of local natural resources and the ecosystem's capacity to respond. This long-held paradigm is based on a weak knowledge of the processes underpinning the emergence of urban life and the rise of an urban-adapted environment in and beyond city boundaries. Here, we report a 6000-year record of environmental changes around the port city of Akko (Acre), Israel, to analyse ecological processes and patterns stemming from the emergence and growth of urban life. We show that early urban development deeply transformed pre-existing ecosystems, swiftly leading to an urban environment already governed by its own ecological rules and this, since the emergence of the cities. PMID:24345820

Early urban impact on Mediterranean coastal environments.

PubMed

Kaniewski, David; Van Campo, Elise; Morhange, Christophe; Guiot, Joël; Zviely, Dov; Shaked, Idan; Otto, Thierry; Artzy, Michal

2013-12-18

A common belief is that, unlike today, ancient urban areas developed in a sustainable way within the environmental limits of local natural resources and the ecosystem's capacity to respond. This long-held paradigm is based on a weak knowledge of the processes underpinning the emergence of urban life and the rise of an urban-adapted environment in and beyond city boundaries. Here, we report a 6000-year record of environmental changes around the port city of Akko (Acre), Israel, to analyse ecological processes and patterns stemming from the emergence and growth of urban life. We show that early urban development deeply transformed pre-existing ecosystems, swiftly leading to an urban environment already governed by its own ecological rules and this, since the emergence of the cities.

The value of our public trees

EPA Science Inventory

An assessment of the value and annual benefits of public trees in the Corvallis Urban Growth Boundary (UGB) was recently conducted by Don Phillips (Research Biologist at the U.S. Environmental Protection Agency [EPA] research lab in Corvallis), along with Connie Burdick (EPA geog...

23 CFR 1.7 - Urban area boundaries.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Urban area boundaries. 1.7 Section 1.7 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL MANAGEMENT AND ADMINISTRATION GENERAL § 1.7 Urban area boundaries. Boundaries of an urban area shall be submitted by the State highway department...

23 CFR 1.7 - Urban area boundaries.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Urban area boundaries. 1.7 Section 1.7 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL MANAGEMENT AND ADMINISTRATION GENERAL § 1.7 Urban area boundaries. Boundaries of an urban area shall be submitted by the State highway department...

23 CFR 1.7 - Urban area boundaries.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Urban area boundaries. 1.7 Section 1.7 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL MANAGEMENT AND ADMINISTRATION GENERAL § 1.7 Urban area boundaries. Boundaries of an urban area shall be submitted by the State highway department...

23 CFR 1.7 - Urban area boundaries.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Urban area boundaries. 1.7 Section 1.7 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL MANAGEMENT AND ADMINISTRATION GENERAL § 1.7 Urban area boundaries. Boundaries of an urban area shall be submitted by the State highway department...

Utilising green and bluespace to mitigate urban heat island intensity.

PubMed

Gunawardena, K R; Wells, M J; Kershaw, T

2017-04-15

It has long been recognised that cities exhibit their own microclimate and are typically warmer than the surrounding rural areas. This 'mesoscale' influence is known as the urban heat island (UHI) effect and results largely from modification of surface properties leading to greater absorption of solar radiation, reduced convective cooling and lower water evaporation rates. Cities typically contain less vegetation and bodies of water than rural areas, and existing green and bluespace is often under threat from increasing population densities. This paper presents a meta-analysis of the key ways in which green and bluespace affect both urban canopy- and boundary-layer temperatures, examined from the perspectives of city-planning, urban climatology and climate science. The analysis suggests that the evapotranspiration-based cooling influence of both green and bluespace is primarily relevant for urban canopy-layer conditions, and that tree-dominated greenspace offers the greatest heat stress relief when it is most needed. However, the magnitude and transport of cooling experienced depends on size, spread, and geometry of greenspaces, with some solitary large parks found to offer minimal boundary-layer cooling. Contribution to cooling at the scale of the urban boundary-layer climate is attributed mainly to greenspace increasing surface roughness and thereby improving convection efficiency rather than evaporation. Although bluespace cooling and transport during the day can be substantial, nocturnal warming is highlighted as likely when conditions are most oppressive. However, when both features are employed together they can offer many synergistic ecosystem benefits including cooling. The ways in which green and bluespace infrastructure is applied in future urban growth strategies, particularly in countries expected to experience rapid urbanisation, warrants greater consideration in urban planning policy to mitigate the adverse effects of the UHI and enhance climate resilience. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Fine-resolution Modeling of Urban-Energy Systems' Water Footprint in River Networks

NASA Astrophysics Data System (ADS)

McManamay, R.; Surendran Nair, S.; Morton, A.; DeRolph, C.; Stewart, R.

2015-12-01

Characterizing the interplay between urbanization, energy production, and water resources is essential for ensuring sustainable population growth. In order to balance limited water supplies, competing users must account for their realized and virtual water footprint, i.e. the total direct and indirect amount of water used, respectively. Unfortunately, publicly reported US water use estimates are spatially coarse, temporally static, and completely ignore returns of water to rivers after use. These estimates are insufficient to account for the high spatial and temporal heterogeneity of water budgets in urbanizing systems. Likewise, urbanizing areas are supported by competing sources of energy production, which also have heterogeneous water footprints. Hence, a fundamental challenge of planning for sustainable urban growth and decision-making across disparate policy sectors lies in characterizing inter-dependencies among urban systems, energy producers, and water resources. A modeling framework is presented that provides a novel approach to integrate urban-energy infrastructure into a spatial accounting network that accurately measures water footprints as changes in the quantity and quality of river flows. River networks (RNs), i.e. networks of branching tributaries nested within larger rivers, provide a spatial structure to measure water budgets by modeling hydrology and accounting for use and returns from urbanizing areas and energy producers. We quantify urban-energy water footprints for Atlanta, GA and Knoxville, TN (USA) based on changes in hydrology in RNs. Although water intakes providing supply to metropolitan areas were proximate to metropolitan areas, power plants contributing to energy demand in Knoxville and Atlanta, occurred 30 and 90km outside the metropolitan boundary, respectively. Direct water footprints from urban landcover primarily comprised smaller streams whereas indirect footprints from water supply reservoirs and energy producers included larger river systems. By using projections in urban populations for 2030 and 2050, we estimated scenarios of expansion in water footprints depending on urban growth policies and energy production technology. We provide examples of how this framework can be used to minimize water footprints and impacts to aquatic biodiversity.

CO2 dispersion modelling over Paris region within the CO2-MEGAPARIS project

NASA Astrophysics Data System (ADS)

Lac, C.; Donnelly, R. P.; Masson, V.; Pal, S.; Donier, S.; Queguiner, S.; Tanguy, G.; Ammoura, L.; Xueref-Remy, I.

2012-10-01

Accurate simulation of the spatial and temporal variability of tracer mixing ratios over urban areas is challenging, but essential in order to utilize CO2 measurements in an atmospheric inverse framework to better estimate regional CO2 fluxes. This study investigates the ability of a high-resolution model to simulate meteorological and CO2 fields around Paris agglomeration, during the March field campaign of the CO2-MEGAPARIS project. The mesoscale atmospheric model Meso-NH, running at 2 km horizontal resolution, is coupled with the Town-Energy Balance (TEB) urban canopy scheme and with the Interactions between Soil, Biosphere and Atmosphere CO2-reactive (ISBA-A-gs) surface scheme, allowing a full interaction of CO2 between the surface and the atmosphere. Statistical scores show a good representation of the Urban Heat Island (UHI) and urban-rural contrasts. Boundary layer heights (BLH) at urban, sub-urban and rural sites are well captured, especially the onset time of the BLH increase and its growth rate in the morning, that are essential for tall tower CO2 observatories. Only nocturnal BLH at sub-urban sites are slightly underestimated a few nights, with a bias less than 50 m. At Eiffel tower, the observed spikes of CO2 maxima occur every morning exactly at the time at which the Atmospheric Boundary Layer (ABL) growth reaches the measurement height. The timing of the CO2 cycle is well captured by the model, with only small biases on CO2 concentrations, mainly linked to the misrepresentation of anthropogenic emissions, as the Eiffel site is at the heart of trafic emission sources. At sub-urban ground stations, CO2 measurements exhibit maxima at the beginning and at the end of each night, when the ABL is fully contracted, with a very strong spatio-temporal variability. The CO2 cycle at these sites is generally well reproduced by the model, even if some biases on the nocturnal maxima appear in the Paris plume parly due to small errors on the vertical transport, or in the vicinity of airports due to small errors on the horizontal transport (wind direction). A sensitivity test without urban parameterisation removes UHI and underpredicts nighttime BLH over urban and sub-urban sites, leading to large overestimation of nocturnal CO2 concentration at the sub-urban sites. The agreement of daytime and nighttime BLH and CO2 predictions of the reference simulation over Paris agglomeration demonstrates the potential of using the meso-scale system on urban and sub-urban area in the context of inverse modelling.

The University of Utah Urban Undertaking (U4)

NASA Astrophysics Data System (ADS)

Lin, J. C.; Mitchell, L.; Bares, R.; Mendoza, D. L.; Fasoli, B.; Bowling, D. R.; Garcia, M. A.; Buchert, M.; Pataki, D. E.; Crosman, E.; Horel, J.; Catharine, D.; Strong, C.; Ehleringer, J. R.

2015-12-01

The University of Utah is leading efforts to understand the spatiotemporal patterns in both emissions and concentrations of greenhouse gases (GHG) and criteria pollutants within urban systems. The urbanized corridor in northern Utah along the Wasatch Front, anchored by Salt Lake City, is undergoing rapid population growth that is projected to double in the next few decades. The Wasatch Front offers multiple advantages as an unique "urban laboratory": urban regions in multiple valleys spanning numerous orders of magnitude in population, each with unique airsheds, well-defined boundary conditions along deserts and tall mountains, strong signals during cold air pool events, seasonal contrasts in pollution, and a legacy of productive partnerships with local stakeholders and governments. We will show results from GHG measurements from the Wasatch Front, including one of the longest running continuous CO2 records in urban areas. Complementing this record are comprehensive meteorological observations and GHG/pollutant concentrations on mobile platforms: light rail, helicopter, and research vans. Variations in the GHG and pollutant observations illustrate human behavior and the resulting "urban metabolism" taking place on hourly, weekly, and seasonal cycles, resulting in a coupling between GHG and criteria pollutants. Moreover, these observations illustrate systematic spatial gradients in GHG and pollutant distributions between and within urban areas, traced to underlying gradients in population, energy use, terrain, and land use. Over decadal time scales the observations reveal growth of the "urban dome" due to expanding urban development. Using numerical models of the atmosphere, we further link concentrations of GHG and air quality-relevant pollutants to underlying emissions at the neighborhood scale as well as urban planning considerations.

A Merging Approach for Urban Boundary Correction Acquired By Remote Sensing Images

NASA Astrophysics Data System (ADS)

Zhang, P. L.; Shi, W. Z.; Wu, X. Y.

2014-11-01

Since reform and opening up to outside world, ever-growing economy and development of urbanization of China have caused expansion of the urban land scale. It's necessary to grasp the information about urban spatial form change, expansion situation and expanding regularity, in order to provide the scientific basis for urban management and planning. The traditional methods, like land supply cumulative method and remote sensing, to get the urban area, existed some defects. Their results always doesn't accord with the reality, and can't reflects the actual size of the urban area. Therefore, we propose a new method, making the best use of remote sensing, the population data, road data and other social economic statistic data. Because urban boundary not only expresses a geographical concept, also a social economic systems.It's inaccurate to describe urban area with only geographic areas. We firstly use remote sensing images, demographic data, road data and other data to produce urban boundary respectively. Then we choose the weight value for each boundary, and in terms of a certain model the ultimate boundary can be obtained by a series of calculations of previous boundaries. To verify the validity of this method, we design a set of experiments and obtained the preliminary results. The results have shown that this method can extract the urban area well and conforms with both the broad and narrow sense. Compared with the traditional methods, it's more real-time, objective and ornamental.

23 CFR 470.105 - Urban area boundaries and highway functional classification.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Urban area boundaries and highway functional classification. 470.105 Section 470.105 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.105 Urban area boundaries and...

23 CFR 470.105 - Urban area boundaries and highway functional classification.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Urban area boundaries and highway functional classification. 470.105 Section 470.105 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.105 Urban area boundaries and...

23 CFR 470.105 - Urban area boundaries and highway functional classification.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Urban area boundaries and highway functional classification. 470.105 Section 470.105 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.105 Urban area boundaries and...

23 CFR 470.105 - Urban area boundaries and highway functional classification.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Urban area boundaries and highway functional classification. 470.105 Section 470.105 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.105 Urban area boundaries and...

Exploring an urban system's dependence on the environment as a source and a sink: the city of Rome (Italy) across space and time scales.

PubMed

Ascione, Marco; Bargigli, Silvia; Campanella, Luigi; Ulgiati, Sergio

2011-05-23

The material, energy and environmental flows supporting the growth and welfare of the city of Rome, during a recent forty-year period (from 1962 to 2002) were investigated in order to understand the resource basis of its present welfare and lifestyle. The study focused on the local scale of the urban system (resources actually used within the system's boundary) as well as on the larger regional and national scales where resources come from. Assessing the resource use change over time allowed to understand what are the main drivers of lifestyle changes of the local population. In particular, while the direct, local-scale use of the main material and energy resources exhibits a quadratic growth over time, the total (direct+indirect) consumption on the scale of the global economy is always 3-4 times higher, is so highlighting how much of a city's growth depends on economic and production activities that develop outside of its boundaries. Water use shows an even more alarming trend, in that the indirect consumption grows much faster, suggesting a shift from the use of a less water-intensive mix of products to a different mix that requires much more water in its industrial production. Such trend calls for increased awareness of the water footprint of goods used as well as increased efficiency in water management by both industries and households. The evolution of resource use and standard of living also affects the release of airborne emissions, an issue that is becoming crucial due to concerns for climate change and urban air pollution. The extent of such additional environmental burden is also explored in the present paper. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Socio-economic and ecological transformations of the peri-urban region of Gurgaon: an analysis of the trickle-down effect in the post globalization era

NASA Astrophysics Data System (ADS)

Yadav, A.; Punia, M.

2014-11-01

Economic processes are a manifestation of dynamic complex interdependent array of factors which involves resources, technology and an acting innovative human mind. Production, growth and development are the processes which has vast number of complex drivers, determinants and factors. Innovation, research, diffusion and dissemination are vital instrument of the economic processes of production, which are part of education. Whereas ecological transformations can be corroborated and analyzed by integrating remote sensing based information related to expansion of built-up area beyond city boundaries, extending to peripheries. City reflect economic, environmental, technological and social processes in their change, yet all are in turn profoundly driven by the urban spatial expansion. Metropolitan cities reflects expansion of existing urban and peri-urban areas with a significant socio-ecological transformation in terms of employment, education, and work force participation and land use changes. From the point of view of New Economic Geography (NEG) Theory 2009, the growth dynamic of metros is influenced by their proximity and dependence to a metropolis and the probable spillover effect. Entry point of discussion is the change in production of space in the post globalization era. It attempts to understand city morphology by using remote sensing datasets of LISS IV, IRS-P6 of 5.8 m spatial resolution for 2008 and 2013 and used Gurgaon Municipal Corporation's (GMC) ward boundary to represent socio-political meaning of this expansion and ways of life within the suburb. To understand how city works, detailed analysis related occupational structure, education and informality of ward 31 of Gurgaon and two villages namely Behlpa, Fazalwas and ward 11 of Nuh ( Mewat) along with the village Gabsanpur is attempted as the spatial units of study.

A regional plan to protect open spaces, water quality, fish and wildlife habitat (Abstract)

Treesearch

Jennifer Budhabhatti; Rosemary Furfey

2000-01-01

1978, voters in the Multnomah, Washington, and Clackamas counties approved the creation of the first elected regional government, Metro to oversee land use planning and manage the urban growth boundary, and be consistent with state land use goals. Metro has authority under the charter and state law to require cities and counties to amend their comprehensive plans and...

Observing the Vertical Extent of the Urban Boundary Layer Over Jersey City, NJ: A Diurnal and Seasonal Analysis

NASA Astrophysics Data System (ADS)

Dempsey, M. J.; Booth, J.; Arend, M.; Melecio-Vazquez, D.; Gonzalez, J.

2015-12-01

The atmospheric boundary remains one of the more difficult components of the climate system to classify. One of the most important characteristics is the boundary layer height, especially in urban settings. The current study examines the boundary layer height using the the New York City Meteorological Network or NYCMetNet. NYCMetNet is a network of weather stations, which report meteorological conditions in and around New York City, as part of the Optical Remote Sensing Laboratory of The City College of New York (ORSL). Of interest to this study is the data obtained from wind profiler station LSC01. The 915 MHz wind profiler is located 30m above the ground on the roof of the Liberty Science Center in Jersey City, NJ. It is a Vaisala Wind Profiler LAP 3000 with a wavelength of ~34cm, which means that the instrument responds primarily to Bragg backscattering. Can a seasonal urban boundary layer climatology be extrapolated from the data obtained from the wind profiler? What is the timing of boundary layer evolution and collapse over Jersey City? How effective is the profiler under cloudy skies and even in light rain or snow? This study examines the entire time period covered by the wind profile (2007 to present) and selects a series of clear days and a series of cloudy days. The top of the urban boundary layer is subjectively located from each half hour time stamp of signal to noise values. The urban boundary layer heights are recorded for clear and then cloudy days. Then the days are sorted seasonally (DJF, MAM, JJA, SON). A seasonal mean is calculated for every half hour time step. Finally a time series of seasonal urban boundary layer heights is constructed, and the timing of the urban boundary layer height maximum and time evolution and collapse of the boundary layer are generalized. A comparison is made against urban boundary layer heights obtained from Modern-Era Retrospective Analysis For Research And Applications (MERRA).

24 CFR 598.105 - Data used for eligibility determinations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... HOUSING AND URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE... boundaries. The boundary of an urban area nominated for designation as an Empowerment Zone must coincide with...

24 CFR 598.105 - Data used for eligibility determinations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... HOUSING AND URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE... boundaries. The boundary of an urban area nominated for designation as an Empowerment Zone must coincide with...

The effects of greenbelt cancellation on land value - The case of Wirye New town, South Korea

NASA Astrophysics Data System (ADS)

Lee, S. G.; Yoon, H.

2017-12-01

In 1971, South Korean government began designating urban growth boundary around the major cities (total 4,294 in 7 metropolitan areas, and total 809 in 7 small and medium sized urban areas) to control the urban sprawl, spurred by the rapid industrialization and urbanization from the 1960s. However, due to the heated development pressure within the cities, and the recognition of its inefficiency for the original purpose, the growth limit, so-called greenbelt, has been gradually canceled since the late 1990s. In response to this change, real estate market around the greenbelt has been also changed. Extant researches suggest that designating greenbelt causes land scarcity and adds amenity value, driving up land and property price within and approaching to the boundary. On the other hand, cancellation of greenbelt consequently increases developable land and eases the land scarcity, thus can be expected to decrease land value. However, when the canceled greenbelt is to be developed, the price again increases within the boundary, while generating externalities outward. Wirye New Town is one of the government-driven housing developments on repealed greenbelt, to meet the great housing demand of the southern part of Seoul. The site area is 6.8km2 , containing 42,947 housing units, and supplementary infrastructures such as new subway lines and transit malls. Its plan was announced in 2005, and the expected completion is 2017. In 2013, after partial completion, 2,949 apartments began to be occupied. 20,810 housing units have been supplied as of 2015, and 22,137 additional units are going to be provided by 2019. This change has increased average land and housing price of the vicinity by the real demand as well as the real estate speculation. While this alteration of greenbelt has affected adjacent real estate market substantially, study has not been conducted to quantify the impact. In this backdrop, this study aims to analyze the changing externalities effect of greenbelt on land price, before and after cancellation, around the Wirye New Town development, using random-coefficient multilevel modeling. The findings of the research will provide urban planners with better understanding on the economic impact of releasing greenbelt on real estate market.

Impacts of future urban expansion on summer climate and heat-related human health in eastern China.

PubMed

Cao, Qian; Yu, Deyong; Georgescu, Matei; Wu, Jianguo; Wang, Wei

2018-03-01

China is the largest and most rapidly urbanizing nation in the world, and is projected to add an additional 200 million city dwellers by the end of 2030. While this rapid urbanization will lead to vast expansion of built-up areas, the possible climate effect and associated human health impact remain poorly understood. Using a coupled urban-atmospheric model, we first examine potential effects of three urban expansion scenarios to 2030 on summer climate in eastern China. Our simulations indicate extensive warming up to 5°C, 3°C, and 2°C in regard to low- (>0%), high- (>75%), and 100% probability urban growth scenarios, respectively. The partitioning of available energy largely explains the changes in 2-m air temperatures, and increased sensible heat flux with higher roughness length of the underlying urban surface is responsible for the increase of nighttime planetary boundary layer height. In the extreme case (the low-probability expansion pathway), the agglomeration of impervious surfaces substantially reduces low-level atmospheric moisture, consequently resulting in large-scale precipitation reduction. However, the effect of near-surface warming far exceeds that of moisture reduction and imposes non-negligible thermal loads on urban residents. Our study, using a scenario-based approach that accounts for the full range of urban growth uncertainty by 2030, helps better evaluate possible regional climate effects and associated human health outcomes in the most rapidly urbanizing areas of China, and has practical implications for the development of sustainable urban regions that are resilient to changes in both mean and extreme conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Exchanges across land-water-scape boundaries in urban systems: strategies for reducing nitrate pollution.

PubMed

Cadenasso, M L; Pickett, S T A; Groffman, P M; Band, L E; Brush, G S; Galvin, M F; Grove, J M; Hagar, G; Marshall, V; McGrath, B P; O'Neil-Dunne, J P M; Stack, W P; Troy, A R

2008-01-01

Conservation in urban areas typically focuses on biodiversity and large green spaces. However, opportunities exist throughout urban areas to enhance ecological functions. An important function of urban landscapes is retaining nitrogen thereby reducing nitrate pollution to streams and coastal waters. Control of nonpoint nitrate pollution in urban areas was originally based on the documented importance of riparian zones in agricultural and forested ecosystems. The watershed and boundary frameworks have been used to guide stream research and a riparian conservation strategy to reduce nitrate pollution in urban streams. But is stream restoration and riparian-zone conservation enough? Data from the Baltimore Ecosystem Study and other urban stream research indicate that urban riparian zones do not necessarily prevent nitrate from entering, nor remove nitrate from, streams. Based on this insight, policy makers in Baltimore extended the conservation strategy throughout larger watersheds, attempting to restore functions that no longer took place in riparian boundaries. Two urban revitalization projects are presented as examples aimed at reducing nitrate pollution to stormwater, streams, and the Chesapeake Bay. An adaptive cycle of ecological urban design synthesizes the insights from the watershed and boundary frameworks, from new data, and from the conservation concerns of agencies and local communities. This urban example of conservation based on ameliorating nitrate water pollution extends the initial watershed-boundary approach along three dimensions: 1) from riparian to urban land-water-scapes; 2) from discrete engineering solutions to ecological design approaches; and 3) from structural solutions to inclusion of individual, household, and institutional behavior.

Assessment of uncertainties of an aircraft-based mass balance approach for quantifying urban greenhouse gas emissions

NASA Astrophysics Data System (ADS)

Cambaliza, M. O. L.; Shepson, P. B.; Caulton, D. R.; Stirm, B.; Samarov, D.; Gurney, K. R.; Turnbull, J.; Davis, K. J.; Possolo, A.; Karion, A.; Sweeney, C.; Moser, B.; Hendricks, A.; Lauvaux, T.; Mays, K.; Whetstone, J.; Huang, J.; Razlivanov, I.; Miles, N. L.; Richardson, S. J.

2014-09-01

Urban environments are the primary contributors to global anthropogenic carbon emissions. Because much of the growth in CO2 emissions will originate from cities, there is a need to develop, assess, and improve measurement and modeling strategies for quantifying and monitoring greenhouse gas emissions from large urban centers. In this study the uncertainties in an aircraft-based mass balance approach for quantifying carbon dioxide and methane emissions from an urban environment, focusing on Indianapolis, IN, USA, are described. The relatively level terrain of Indianapolis facilitated the application of mean wind fields in the mass balance approach. We investigate the uncertainties in our aircraft-based mass balance approach by (1) assessing the sensitivity of the measured flux to important measurement and analysis parameters including wind speed, background CO2 and CH4, boundary layer depth, and interpolation technique, and (2) determining the flux at two or more downwind distances from a point or area source (with relatively large source strengths such as solid waste facilities and a power generating station) in rapid succession, assuming that the emission flux is constant. When we quantify the precision in the approach by comparing the estimated emissions derived from measurements at two or more downwind distances from an area or point source, we find that the minimum and maximum repeatability were 12 and 52%, with an average of 31%. We suggest that improvements in the experimental design can be achieved by careful determination of the background concentration, monitoring the evolution of the boundary layer through the measurement period, and increasing the number of downwind horizontal transect measurements at multiple altitudes within the boundary layer.

CO2 dispersion modelling over Paris region within the CO2-MEGAPARIS project

NASA Astrophysics Data System (ADS)

Lac, C.; Donnelly, R. P.; Masson, V.; Pal, S.; Riette, S.; Donier, S.; Queguiner, S.; Tanguy, G.; Ammoura, L.; Xueref-Remy, I.

2013-05-01

Accurate simulation of the spatial and temporal variability of tracer mixing ratios over urban areas is a challenging and interesting task needed to be performed in order to utilise CO2 measurements in an atmospheric inverse framework and to better estimate regional CO2 fluxes. This study investigates the ability of a high-resolution model to simulate meteorological and CO2 fields around Paris agglomeration during the March field campaign of the CO2-MEGAPARIS project. The mesoscale atmospheric model Meso-NH, running at 2 km horizontal resolution, is coupled with the Town Energy Balance (TEB) urban canopy scheme and with the Interactions between Soil, Biosphere and Atmosphere CO2-reactive (ISBA-A-gs) surface scheme, allowing a full interaction of CO2 modelling between the surface and the atmosphere. Statistical scores show a good representation of the urban heat island (UHI) with stronger urban-rural contrasts on temperature at night than during the day by up to 7 °C. Boundary layer heights (BLH) have been evaluated on urban, suburban and rural sites during the campaign, and also on a suburban site over 1 yr. The diurnal cycles of the BLH are well captured, especially the onset time of the BLH increase and its growth rate in the morning, which are essential for tall tower CO2 observatories. The main discrepancy is a small negative bias over urban and suburban sites during nighttime (respectively 45 m and 5 m), leading to a few overestimations of nocturnal CO2 mixing ratios at suburban sites and a bias of +5 ppm. The diurnal CO2 cycle is generally well captured for all the sites. At the Eiffel tower, the observed spikes of CO2 maxima occur every morning exactly at the time at which the atmospheric boundary layer (ABL) growth reaches the measurement height. At suburban ground stations, CO2 measurements exhibit maxima at the beginning and at the end of each night, when the ABL is fully contracted, with a strong spatio-temporal variability. A sensitivity test without urban parameterisation removes the UHI and underpredicts nighttime BLH over urban and suburban sites, leading to large overestimation of nocturnal CO2 mixing ratio at the suburban sites (bias of +17 ppm). The agreement between observation and prediction for BLH and CO2 concentrations and urban-rural increments, both day and night, demonstrates the potential of using the urban mesoscale system in the context of inverse modelling

Validation of the Martilli's Urban Boundary Layer Scheme with measurements from two mid-latitude European cities

NASA Astrophysics Data System (ADS)

Hamdi, R.; Schayes, G.

2005-07-01

The Martilli's urban parameterization scheme is improved and implemented in a mesoscale model in order to take into account the typical effects of a real city on the air temperature near the ground and on the surface exchange fluxes. The mesoscale model is run on a single column using atmospheric data and radiation recorded above roof level as forcing. Here, the authors validate the Martilli's urban boundary layer scheme using measurements from two mid-latitude European cities: Basel, Switzerland and Marseilles, France. For Basel, the model performance is evaluated with observations of canyon temperature, surface radiation, and energy balance fluxes obtained during the Basel urban boundary layer experiment (BUBBLE). The results show that the urban parameterization scheme is able to reproduce the generation of the Urban Heat Island (UHI) effect over urban area and represents correctly most of the behavior of the fluxes typical of the city center of Basel, including the large heat uptake by the urban fabric and the positive sensible heat flux at night. For Marseilles, the model performance is evaluated with observations of surface temperature, canyon temperature, surface radiation, and energy balance fluxes collected during the field experiments to constrain models of atmospheric pollution and transport of emissions (ESCOMPTE) and its urban boundary layer (UBL) campaign. At both urban sites, vegetation cover is less than 20%, therefore, particular attention was directed to the ability of the Martilli's urban boundary layer scheme to reproduce the observations for the Marseilles city center, where the urban parameters and the synoptic forcing are totally different from Basel. Evaluation of the model with wall, road, and roof surface temperatures gave good results. The model correctly simulates the net radiation, canyon temperature, and the partitioning between the turbulent and storage heat fluxes.

Dual Identity and Prejudice: The Moderating Role of Group Boundary Permeability

PubMed Central

Shi, Yuanyuan; Dang, Jianning; Zheng, Wenwen; Liu, Li

2017-01-01

Past work suggested that dual identity was effective to reduce prejudice. This study extended research on dual identity and prejudice by identifying a boundary condition in this relationship, that is, group permeability. In Study 1, we replicated previous studies with Chinese individuals and found that inducing dual identity (emphasizing subgroup differences and a common nation identity), compared to the control condition, decreased the urban residents’ prejudice against rural-to-urban migrants. In Study 2, we manipulated the group boundary permeability using the Hukou system reform, and found that when the group boundary was permeable, dual identity was effective in reducing prejudice against rural-to-urban migrants. However, this effect vanished in the condition where the group boundary was impermeable. These results point to the importance of inducing dual identity under specific conditions for research on decreasing prejudice. Some practical implications of the findings for urbanization and immigration are discussed. PMID:28261130

SPATIAL VARIATION OF THE EVOLUTION AND STRUCTURE OF THE URBAN BOUNDARY LAYER

EPA Science Inventory

The spatial variation of the nocturnal urban boundary layer structure and the time variation of the mixing height, the nocturnal inversion top and strength after sunrise are presented for urban sites located upwind, downwind, and near the center of the heat island and for upwind ...

Modeling the urban boundary layer

NASA Technical Reports Server (NTRS)

Bergstrom, R. W., Jr.

1976-01-01

A summary and evaluation is given of the Workshop on Modeling the Urban Boundary Layer; held in Las Vegas on May 5, 1975. Edited summaries from each of the session chairpersons are also given. The sessions were: (1) formulation and solution techniques, (2) K-theory versus higher order closure, (3) surface heat and moisture balance, (4) initialization and boundary problems, (5) nocturnal boundary layer, and (6) verification of models.

Validation of Martilli's urban boundary layer scheme with measurements from two mid-latitude European cities

NASA Astrophysics Data System (ADS)

Hamdi, R.; Schayes, G.

2007-08-01

Martilli's urban parameterization scheme is improved and implemented in a mesoscale model in order to take into account the typical effects of a real city on the air temperature near the ground and on the surface exchange fluxes. The mesoscale model is run on a single column using atmospheric data and radiation recorded above roof level as forcing. Here, the authors validate Martilli's urban boundary layer scheme using measurements from two mid-latitude European cities: Basel, Switzerland and Marseilles, France. For Basel, the model performance is evaluated with observations of canyon temperature, surface radiation, and energy balance fluxes obtained during the Basel urban boundary layer experiment (BUBBLE). The results show that the urban parameterization scheme represents correctly most of the behavior of the fluxes typical of the city center of Basel, including the large heat uptake by the urban fabric and the positive sensible heat flux at night. For Marseilles, the model performance is evaluated with observations of surface temperature, canyon temperature, surface radiation, and energy balance fluxes collected during the field experiments to constrain models of atmospheric pollution and transport of emissions (ESCOMPTE) and its urban boundary layer (UBL) campaign. At both urban sites, vegetation cover is less than 20%, therefore, particular attention was directed to the ability of Martilli's urban boundary layer scheme to reproduce the observations for the Marseilles city center, where the urban parameters and the synoptic forcing are totally different from Basel. Evaluation of the model with wall, road, and roof surface temperatures gave good results. The model correctly simulates the net radiation, canyon temperature, and the partitioning between the turbulent and storage heat fluxes.

Defining the urban area for cross national comparison of health indicators: the EURO-URHIS 2 boundary study.

PubMed

Higgerson, James; Birt, Christopher A; van Ameijden, Erik; Verma, Arpana

2017-05-01

Despite much research focusing on the impact of the city condition upon health, there still remains a lack of consensus over what constitutes an urban area (UA). This study was conducted to establish comparable boundaries for the UAs participating in EURO-URHIS 2, and to test whether the sample reflected the heterogeneity of urban living. Key UA contacts ( n = 28) completed a cross-sectional questionnaire, which included where available comparison between Urban Audit city and larger urban zone (LUZ) boundaries and public health administration areas (PHAAs). Additionally, broad health and demographic indicators were sought to test for heterogeneity of the EURO-URHIS 2 sample. Urban Audit city boundaries were found to be suitable for data collection in 100% ( n = 21) of UAs where Urban Audit data were available. The remainder ( n = 7) identified PHAA boundaries akin to the 'city' level. Heterogeneity was observed in the sample for population size and infant mortality rate. Heterogeneity could not be established for male and female life expectancy. This study was able to establish comparable boundaries for EURO-URHIS 2 data collection, with the 'city' area being selected for data collection. The homogeneity of life expectancy indicators was reflective of sub-regional similarities in life expectancy, whilst population estimates and rates of infant mortality indicated the presence of heterogeneity within the sample. Future work would trial these methods with a larger number of indicators and for a larger number of UAs. © The Author 2015. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Investigation of the climate change within Moscow metropolitan area

NASA Astrophysics Data System (ADS)

Varentsov, Mikhail; Trusilova, Kristina; Konstantinov, Pavel; Samsonov, Timofey

2014-05-01

As the urbanization continues worldwide more than half of the Earth's population live in the cities (U.N., 2010). Therefore the vulnerability of the urban environment - the living space for millions of people - to the climate change has to be investigated. It is well known that urban features strongly influence the atmospheric boundary layer and determine the microclimatic features of the local environment, such as urban heat island (UHI). Available temperature observations in cities are, however, influenced by the natural climate variations, human-induced climate warming (IPCC, 2007) and in the same time by the growth and structural modification of the urban areas. The relationship between these three factors and their roles in climate changes in the cities are very important for the climatic forecast and requires better understanding. In this study, we made analysis of the air temperature change and urban heat island evolution within Moscow urban area during decades 1970-2010, while this urban area had undergone intensive growth and building modification allowing the population of Moscow to increase from 7 to 12 million people. Analysis was based on the data from several meteorological stations in Moscow region and Moscow city, including meteorological observatory of Lomonosov Moscow State University. Differences in climate change between urban and rural stations, changes of the power and shape of urban heat island and their relationships with changes of building height and density were investigated. Collected data and obtained results are currently to be used for the validation of the regional climate model COSMO-CLM with the purpose to use this model for further more detailed climate research and forecasts for Moscow metropolitan area. References: 1. U.N. (2010), World Urbanization Prospects. The 2009 Revision.Rep., 1-47 pp, United Nations. Department of Economic and Social Affairs. Population Division., New York. 2. IPCC (2007), IPCC Fourth Assessment Report: Climate Change 2007 (AR4) Rep.,Cambridge University Press, Cambridge, United Kingdom and New York, NY, USA.

Estimating changes in urban land and urban population using refined areal interpolation techniques

NASA Astrophysics Data System (ADS)

Zoraghein, Hamidreza; Leyk, Stefan

2018-05-01

The analysis of changes in urban land and population is important because the majority of future population growth will take place in urban areas. U.S. Census historically classifies urban land using population density and various land-use criteria. This study analyzes the reliability of census-defined urban lands for delineating the spatial distribution of urban population and estimating its changes over time. To overcome the problem of incompatible enumeration units between censuses, regular areal interpolation methods including Areal Weighting (AW) and Target Density Weighting (TDW), with and without spatial refinement, are implemented. The goal in this study is to estimate urban population in Massachusetts in 1990 and 2000 (source zones), within tract boundaries of the 2010 census (target zones), respectively, to create a consistent time series of comparable urban population estimates from 1990 to 2010. Spatial refinement is done using ancillary variables such as census-defined urban areas, the National Land Cover Database (NLCD) and the Global Human Settlement Layer (GHSL) as well as different combinations of them. The study results suggest that census-defined urban areas alone are not necessarily the most meaningful delineation of urban land. Instead, it appears that alternative combinations of the above-mentioned ancillary variables can better depict the spatial distribution of urban land, and thus make it possible to reduce the estimation error in transferring the urban population from source zones to target zones when running spatially-refined temporal areal interpolation.

Changing Urbania: Estimating Changes in Urban Land and Urban Population Using Refined Areal Interpolation Techniques

NASA Astrophysics Data System (ADS)

Zoraghein, H.; Leyk, S.; Balk, D.

2017-12-01

The analysis of changes in urban land and population is important because the majority of future population growth will take place in urban areas. The U.S. Census historically classifies urban land using population density and various land-use criteria. This study analyzes the reliability of census-defined urban lands for delineating the spatial distribution of urban population and estimating its changes over time. To overcome the problem of incompatible enumeration units between censuses, regular areal interpolation methods including Areal Weighting (AW) and Target Density Weighting (TDW), with and without spatial refinement, are implemented. The goal in this study is to estimate urban population in Massachusetts in 1990 and 2000 (source zones), within tract boundaries of the 2010 census (target zones), respectively, to create a consistent time series of comparable urban population estimates from 1990 to 2010. Spatial refinement is done using ancillary variables such as census-defined urban areas, the National Land Cover Database (NLCD) and the Global Human Settlement Layer (GHSL) as well as different combinations of them. The study results suggest that census-defined urban areas alone are not necessarily the most meaningful delineation of urban land. Instead it appears that alternative combinations of the above-mentioned ancillary variables can better depict the spatial distribution of urban land, and thus make it possible to reduce the estimation error in transferring the urban population from source zones to target zones when running spatially-refined temporal areal interpolation.

The light pollution as a surrogate for urban population of the US cities

NASA Astrophysics Data System (ADS)

Operti, Felipe G.; Oliveira, Erneson A.; Carmona, Humberto A.; Machado, Javam C.; Andrade, José S.

2018-02-01

We show that the definition of the city boundaries can have a dramatic influence on the scaling behavior of the night-time light (NTL) as a function of population (POP) in the US. Precisely, our results show that the arbitrary geopolitical definition based on the Metropolitan/Consolidated Metropolitan Statistical Areas (MSA/CMSA) leads to a sublinear power-law growth of NTL with POP. On the other hand, when cities are defined according to a more natural agglomeration criteria, namely, the City Clustering Algorithm (CCA), an isometric relation emerges between NTL and population. This discrepancy is compatible with results from previous works showing that the scaling behaviors of various urban indicators with population can be substantially different for distinct definitions of city boundaries. Moreover, considering the CCA definition as more adequate than the MSA/CMSA one because the former does not violate the expected extensivity between land population and area of their generated clusters, we conclude that, without loss of generality, the CCA measures of light pollution and population could be interchangeably utilized in future studies.

Urban area delineation and detection of change along the urban-rural boundary as derived from LANDSAT digital data

NASA Technical Reports Server (NTRS)

Christenson, J. W.; Lachowski, H. M.

1977-01-01

LANDSAT digital multispectral scanner data, in conjunction with supporting ground truth, were investigated to determine their utility in delineation of urban-rural boundaries. The digital data for the metropolitan areas of Washington, D. C.; Austin, Texas; and Seattle, Washingtion; were processed using an interactive image processing system. Processing focused on identification of major land cover types typical of the zone of transition from urban to rural landscape, and definition of their spectral signatures. Census tract boundaries were input into the interactive image processing system along with the LANDSAT single and overlayed multiple date MSS data. Results of this investigation indicate that satellite collected information has a practical application to the problem of urban area delineation and to change detection.

From PDS Classroom Teachers to Urban Teacher Educators: Learning from Professional Development School Boundary Spanners

ERIC Educational Resources Information Center

Fisher, Teresa R.; Many, Joyce E.

2014-01-01

This qualitative inquiry explores perceptions and experiences of three urban educators who had been involved in PDS initiatives both from the school perspective as classroom teachers and mentors to interns and from the university perspective as urban teacher-educators. These ''boundary spanners'' provided insight into and appreciation for the…

City Size, Density and Sectoral Structure: Exploring Urban Sustainability in the Regions.

NASA Astrophysics Data System (ADS)

Svirejeva-Hopkins, Anastasia

2010-05-01

For the first time in history, the Global population is more urban than rural and the trend is obvious at various scales. Cities do not serve just as dynamic centres of activities, jobs and consumption markets, social interactions and cultural expressions, but also carry the weight of the main environmental problems of current times and the near future. Global Warming, air and water pollution, population growth and recourse constraints, i.e. reduction of carrying capacity of the environment are among the well known ones. The overall aim of this research is to develop mitigation (at various scales) and adaptation systems, tailored to urban settlements. They should be effective at the very local as well as regional levels, assess and introduce innovative urban technologies and policies, reduce ecological footprint of cities and increase recycling efficiency. We propose the empirical method of urban sustainability assessment, that supports our hypothesis that city functioning, the changes in its population and area growth depends on the size, average and internal densities and the geographical form. The existing cities of three regions are examined: Western and Eastern Europe (incl. Russia), Latin America and China. There are fundamental urban developmental differences and also within the first region, namely between EU countries and the Eastern part of European geographical region. The cities are considered not only as some agglomerates of areas with dense population but from the ecological point of view, namely examining inflow of food and energy and outflow of waste products across the boundaries. There are major differences between the patterns of urbanisation in the studied regions, urban systems functioning and resilience. Continuous investigation of these differenced helps building regional scenarios of cities development, population allocation and pollution management for the 21st century.

Diurnal changes in urban boundary layer environment induced by urban greening

NASA Astrophysics Data System (ADS)

Song, Jiyun; Wang, Zhi-Hua

2016-11-01

Urban green infrastructure has been widely used for mitigating adverse environmental problems as well as enhancing urban sustainability of cities worldwide. Here we develop an integrated urban-land-atmosphere modeling framework with the land surface processes parameterized by an advanced urban canopy model and the atmospheric processes parameterized by a single column model. The model is then applied to simulate a variety of forms of green infrastructure, including urban lawns, shade trees, green and cool roofs, and their impact on environmental changes in the total urban boundary layer (UBL) for a stereotypical desert city, viz. Phoenix, Arizona. It was found that green roofs have a relatively uniform cooling effect proportional to their areal coverage. In particular, a reduction of UBL temperature of 0.3 °C and 0.2 °C per 10% increase of green roof coverage was observed at daytime and nighttime, respectively. In contrast, the effect of greening of street canyons is constrained by the overall abundance of green infrastructure and the energy available for evapotranspiration. In addition, the increase in urban greening causes boundary-layer height to decrease during daytime but increase at nighttime, leading to different trends of changes in urban air quality throughout a diurnal cycle.

Effects of air pollution on thermal structure and dispersion in an urban planetary boundary layer

NASA Technical Reports Server (NTRS)

Viskanta, R.; Johnson, R. O.; Bergstrom, R. W.

1977-01-01

The short-term effects of urbanization and air pollution on the transport processes in the urban planetary boundary layer (PBL) are studied. The investigation makes use of an unsteady two-dimensional transport model which has been developed by Viskanta et al., (1976). The model predicts pollutant concentrations and temperature in the PBL. The potential effects of urbanization and air pollution on the thermal structure in the urban PBL are considered, taking into account the results of numerical simulations modeling the St. Louis, Missouri metropolitan area.

Challenges on Java’s small city spatial planning

NASA Astrophysics Data System (ADS)

Wirawan, B.; Tambunan, J. R.

2018-05-01

Most Indonesians nowadays live in the urban area, due to urbanization. 60 percent of the inhabitants of Java, the most populous island in Indonesia, will live in the urban area by 2010, a figure that is higher than the national average of 55 percent. Urbanization has brought a large influx of newcomers not only into the metropolitan or large cities, but also into small and medium cities. One of urbanization’s most concerning impacts is urban sprawl that harms sustainability. There is a dearth of academic literature studying the phenomenon of urban sprawl in Indonesian small cities. Urban sprawl in small cities is commonly ignored, considered as a contained problem the solution for which is a simple use of local spatial plan. Unfortunately, for Indonesia, this solution is difficult to implement because city spatial plans works only within administrative jurisdictions, whilst the urban sprawls themselves generally occur across the borders of different administrative jurisdictions. This study studies urban sprawls occurring in several small cities in Java. While those cities already have spatial plan, most were the general spatial plan (Rencana Tata Ruang Wilayah Kota/Kabupaten) that operates only within the city’s administrative jurisdiction. We are unable to find detailed strategies in these cities to deal with urban sprawl. We also found that all spatial plans are unable to come up with urban growth boundary strategy. Finally, we are also unable to find integrated detailed spatial plan among those cities to answer the urban sprawl situation.

Boundary Spanners as Bridges of Student and School Discourses in an Urban Science and Mathematics High School

ERIC Educational Resources Information Center

Buxton, Cory A.; Carlone, Heidi B.; Carlone, David

2005-01-01

A key to improving urban science and mathematics education is to facilitate the mutual understanding of the participants involved and then look for strategies to bridge differences. Educators need new theoretical tools to do so. In this paper the argument is made that the concept of "boundary spanner" is such a tool. Boundary spanners…

Monitoring evolving urban cluster systems using DMSP/OLS nighttime light data: a case study of the Yangtze River Delta region, China

NASA Astrophysics Data System (ADS)

Wang, Zhao; Yang, Shan; Wang, Shuguang; Shen, Yan

2017-10-01

The assessment of the dynamic urban structure has been affected by lack of timely and accurate spatial information for a long period, which has hindered the measurements of structural continuity at the macroscale. Defense meteorological satellite program's operational linescan system (DMSP/OLS) nighttime light (NTL) data provide an ideal source for urban information detection with a long-time span, short-time interval, and wide coverage. In this study, we extracted the physical boundaries of urban clusters from corrected NTL images and quantitatively analyzed the structure of the urban cluster system based on rank-size distribution, spatial metrics, and Mann-Kendall trend test. Two levels of urban cluster systems in the Yangtze River Delta region (YRDR) were examined. We found that (1) in the entire YRDR, the urban cluster system showed a periodic process, with a significant trend of even distribution before 2007 but an unequal growth pattern after 2007, and (2) at the metropolitan level, vast disparities exist in four metropolitan areas for the fluctuations of Pareto's exponent, the speed of cluster expansion, and the dominance of core cluster. The results suggest that the extracted urban cluster information from NTL data effectively reflect the evolving nature of regional urbanization, which in turn can aid in the planning of cities and help achieve more sustainable regional development.

Construction of a New Growth References for China Based on Urban Chinese Children: Comparison with the WHO Growth Standards

PubMed Central

Zong, Xin-Nan; Li, Hui

2013-01-01

Introduction Growth references for Chinese children should be updated due to the positive secular growth trends and the progress of the smoothing techniques. Human growth differs among the various ethnic groups, so comparison of the China references with the WHO standards helps to understand such differences. Methods The China references, including weight, length/height, head circumference, weight-for-length/height and body mass index (BMI) aged 0–18 years, were constructed based on 69,760 urban infants and preschool children under 7 years and 24,542 urban school children aged 6–20 years derived from two cross-sectional national surveys. The Cole’s LMS method is employed for smoothing the growth curves. Results The merged data sets resulted in a smooth transition at age 6–7 years and continuity of curves from 0 to 18 years. Varying differences were found on the empirical standard deviation (SD) curves in each indicator at nearly all ages between China and WHO. The most noticeable differences occurred in genders, final height and boundary centiles curves. Chinese boys’ weight is strikingly heavier than that of the WHO at age 6–10 years. The height is taller than that of the WHO for boys below 15 years and for girls below 13, but is significantly lower when boys over 15 years and girls over 13. BMI is generally higher than that of the WHO for boys at age 6–16 years but appreciably lower for girls at 3–18 years. Conclusions The differences between China and WHO are mainly caused by the reference populations of different ethnic backgrounds. For practitioners, the choices of the standards/references depend on the population to be assessed and the purpose of the study. The new China references could be applied to facilitate the standardization assessment of growth and nutrition for Chinese children and adolescents in clinical pediatric and public health. PMID:23527219

The urban boundary-layer field campaign in marseille (ubl/clu-escompte): set-up and first results

NASA Astrophysics Data System (ADS)

Mestayer, P.G.; Durand, P.; Augustin, P.; Bastin, S.; Bonnefond, J.-M.; Benech, B.; Campistron, B.; Coppalle, A.; Delbarre, H.; Dousset, B.; Drobinski, P.; Druilhet, A.; Frejafon, E.; Grimmond, C.S.B.; Groleau, D.; Irvine, M.; Kergomard, C.; Kermadi, S.; Lagouarde, J.-P.; Lemonsu, A.; Lohou, F.; Long, N.; Masson, V.; Moppert, C.; Noilhan, J.; Offerle, B.; Oke, T.R.; Pigeon, G.; Puygrenier, V.; Roberts, S.; Rosant, J.-M.; Sanid, F.; Salmond, J.; Talbaut, M.; Voogt, J.

The UBL/CLU (urban boundary layer/couche limite urbaine) observation and modelling campaign is a side-project of the regional photochemistry campaign ESCOMPTE. UBL/CLU focuses on the dynamics and thermodynamics of the urban boundary layer of Marseille, on the Mediterranean coast of France. The objective of UBL/CLU is to document the four-dimensional structure of the urban boundary layer and its relation to the heat and moisture exchanges between the urban canopy and the atmosphere during periods of low wind conditions, from June 4 to July 16, 2001. The project took advantage of the comprehensive observational set-up of the ESCOMPTE campaign over the Berre-Marseille area, especially the ground-based remote sensing, airborne measurements, and the intensive documentation of the regional meteorology. Additional instrumentation was installed as part of UBL/CLU. Analysis objectives focus on (i) validation of several energy balance computational schemes such as LUMPS, TEB and SM2-U, (ii) ground truth and urban canopy signatures suitable for the estimation of urban albedos and aerodynamic surface temperatures from satellite data, (iii) high resolution mapping of urban land cover, land-use and aerodynamic parameters used in UBL models, and (iv) testing the ability of high resolution atmospheric models to simulate the structure of the UBL during land and sea breezes, and the related transport and diffusion of pollutants over different districts of the city. This paper presents initial results from such analyses and details of the overall experimental set-up.

Quantifying different types of urban growth and the change dynamic in Guangzhou using multi-temporal remote sensing data

NASA Astrophysics Data System (ADS)

Sun, Cheng; Wu, Zhi-feng; Lv, Zhi-qiang; Yao, Na; Wei, Jian-bing

2013-04-01

There is a widespread concern about urban sprawl. It has negative impacts on natural resources, economic health, and community character. Without a universal definition of urban sprawl, its quantification and modeling is difficult. Traditionally, urban sprawl was described using qualitative terms, and landscape patterns. Quantitative methods are required to help local, regional and state land use planners to better identify, understand and address it. In this study, an integrated approach of remote sensing and GIS was used to identify three urban growth types of infilling growth, outlying growth and edge-expansion growth at the city of Guangzhou, China. Spatial metrics were used to characterize long-term trends and patterns of urban growth. Result shows that the proposed method can identify and visualize different urban growth types. Infilling growth is the dominant expansion type. Edge-expansion is concentrated at suburban areas. Outlying growth mainly occurs relatively far from the urban core. The analysis shows that initially the urban area expands mainly as outlying growth, causing increased fragmentation and dispersion of urban areas. Next, growth filled in vacant non-urban area inwards, resulting into a more compact and aggregated urban pattern. The study shows an improved understanding of urban growth, and helps to provide an effective way for urban planning.

New particle formation at ground level and in the vertical column over the Barcelona area

NASA Astrophysics Data System (ADS)

Minguillón, M. C.; Brines, M.; Pérez, N.; Reche, C.; Pandolfi, M.; Fonseca, A. S.; Amato, F.; Alastuey, A.; Lyasota, A.; Codina, B.; Lee, H.-K.; Eun, H.-R.; Ahn, K.-H.; Querol, X.

2015-10-01

The vertical profiles (up to 975 m a.s.l.) of ultrafine and micronic particles across the planetary boundary layer and the free troposphere over a Mediterranean urban environment were investigated. Measurements were carried out using a tethered balloon equipped with a miniaturized condensation particle counter, a miniaturized optical particle counter, a micro-aethalometer, a rotating impactor, and meteorological instrumentation. Simultaneous ground measurements were carried out at an urban and a regional background site. New particle formation episodes initiating in the urban area were observed under high insolation conditions. The precursors were emitted by the city and urban photochemically-activated nucleation occurred both at high atmospheric levels (tens to hundreds of meters) and at ground level. The new particle formation at ground level was limited by the high particulate matter concentrations recorded during the morning traffic rush hours that increase the condensation sink and prevent new particle formation, and therefore restricted to midday and early afternoon. The aloft new particle formation occurred earlier as the thermally ascending polluted air mass was diluted. The regional background was only affected from midday and early afternoon when sea and mountain breezes transported the urban air mass after particle growth. These events are different from most new particle formation events described in literature, characterized by a regionally originated nucleation, starting early in the morning in the regional background and persisting with a subsequent growth during a long period. An idealized and simplified model of the spatial and time occurrence of these two types of new particle formation episodes into, around and over the city was elaborated.

The Atlanta Urban Heat Island Mitigation and Air Quality Modeling Project: How High-Resoution Remote Sensing Data Can Improve Air Quality Models

NASA Technical Reports Server (NTRS)

Quattrochi, Dale A.; Estes, Maurice G., Jr.; Crosson, William L.; Khan, Maudood N.

2006-01-01

The Atlanta Urban Heat Island and Air Quality Project had its genesis in Project ATLANTA (ATlanta Land use Analysis: Temperature and Air quality) that began in 1996. Project ATLANTA examined how high-spatial resolution thermal remote sensing data could be used to derive better measurements of the Urban Heat Island effect over Atlanta. We have explored how these thermal remote sensing, as well as other imaged datasets, can be used to better characterize the urban landscape for improved air quality modeling over the Atlanta area. For the air quality modeling project, the National Land Cover Dataset and the local scale Landpro99 dataset at 30m spatial resolutions have been used to derive land use/land cover characteristics for input into the MM5 mesoscale meteorological model that is one of the foundations for the Community Multiscale Air Quality (CMAQ) model to assess how these data can improve output from CMAQ. Additionally, land use changes to 2030 have been predicted using a Spatial Growth Model (SGM). SGM simulates growth around a region using population, employment and travel demand forecasts. Air quality modeling simulations were conducted using both current and future land cover. Meteorological modeling simulations indicate a 0.5 C increase in daily maximum air temperatures by 2030. Air quality modeling simulations show substantial differences in relative contributions of individual atmospheric pollutant constituents as a result of land cover change. Enhanced boundary layer mixing over the city tends to offset the increase in ozone concentration expected due to higher surface temperatures as a result of urbanization.

Using UAV's to Measure the Urban Boundary Layer

NASA Astrophysics Data System (ADS)

Jacob, R. L.; Sankaran, R.; Beckman, P. H.

2015-12-01

The urban boundary layer is one of the most poorly studied regions of the atmospheric boundary layer. Since a majority of the world's population now lives in urban areas, it is becoming a more important region to measure and model. The combination of relatively low-cost unmanned aerial vehicles and low-cost sensors can together provide a new instrument for measuring urban and other boundary layers. We have mounted a new sensor and compute platform called Waggle on an off-the-shelf XR8 octo-copter from 3DRobotics. Waggle consists of multiple sensors for measuring pressure, temperature and humidity as well as trace gases such as carbon monoxide, nitrogen dioxide, sulfur dioxide and ozone. A single board computer running Linux included in Waggle on the UAV allows in-situ processing and data storage. Communication of the data is through WiFi or 3G and the Waggle software can save the data in case communication is lost during flight. The flight pattern is a deliberately simple vertical ascent and descent over a fixed location to provide vertical profiles and so flights can be confined to urban parks, industrial areas or the footprint of a single rooftop. We will present results from test flights in urban and rural areas in and around Chicago.

TURBULENCE PARAMETERS IMPACTING DISPERSION IN AN URBAN CONVECTIVE BOUNDARY LAYER

EPA Science Inventory

Turbulence measurements of the three dimensional wind components were collected by an instrumented research aircraft on 7 days in August 1976. These aircraft flights were conducted as part of the Regional Air Pollution Study (RAPS) urban boundary layer field program in St. Louis,...

Evaluation of urban surface parameterizations in the WRF model using measurements during the Texas Air Quality Study 2006 field campaign

NASA Astrophysics Data System (ADS)

Lee, S.-H.; Kim, S.-W.; Angevine, W. M.; Bianco, L.; McKeen, S. A.; Senff, C. J.; Trainer, M.; Tucker, S. C.; Zamora, R. J.

2010-10-01

The impact of urban surface parameterizations in the WRF (Weather Research and Forecasting) model on the simulation of local meteorological fields is investigated. The Noah land surface model (LSM), a modified LSM, and a single-layer urban canopy model (UCM) have been compared, focusing on urban patches. The model simulations were performed for 6 days from 12 August to 17 August during the Texas Air Quality Study 2006 field campaign. Analysis was focused on the Houston-Galveston metropolitan area. The model simulated temperature, wind, and atmospheric boundary layer (ABL) height were compared with observations from surface meteorological stations (Continuous Ambient Monitoring Stations, CAMS), wind profilers, the NOAA Twin Otter aircraft, and the NOAA Research Vessel Ronald H. Brown. The UCM simulation showed better results in the comparison of ABL height and surface temperature than the LSM simulations, whereas the original LSM overestimated both the surface temperature and ABL height significantly in urban areas. The modified LSM, which activates hydrological processes associated with urban vegetation mainly through transpiration, slightly reduced warm and high biases in surface temperature and ABL height. A comparison of surface energy balance fluxes in an urban area indicated the UCM reproduces a realistic partitioning of sensible heat and latent heat fluxes, consequently improving the simulation of urban boundary layer. However, the LSMs have a higher Bowen ratio than the observation due to significant suppression of latent heat flux. The comparison results suggest that the subgrid heterogeneity by urban vegetation and urban morphological characteristics should be taken into account along with the associated physical parameterizations for accurate simulation of urban boundary layer if the region of interest has a large fraction of vegetation within the urban patch. Model showed significant discrepancies in the specific meteorological conditions when nocturnal low-level jets exist and a thermal internal boundary layer over water forms.

Are winds in cities always slower than in the countryside? Modelling the Urban Wind Island Effect

NASA Astrophysics Data System (ADS)

Droste, Arjan; Steeneveld, Gert-Jan

2017-04-01

Though the Urban Heat Island has been extensively studied, relatively little has been documented about differences in wind between the city as a whole and the countryside. Urban winds are difficult to capture in both observations and modelling, due to the complex urban canyon and neighbourhood geometry. This study uses a straightforward mixed-layer model (Tennekes & Driedonks, 1981) to investigate the contrast between the diurnal cycle of wind in the urban and the rural environment. The model contains one urban and one rural column, to identify differences in wind patterns between city and countryside under equal geostrophic forcing. The model has been evaluated against rural observations from the 213 m. Cabauw tower (the Netherlands), and the urban observations from the BUBBLE campaign (Basel, Rotach et al., 2005). The influence of the urban fabric on the wind is investigated by varying the surface underneath the column model using the 10 urban Local Climate Zones, thereby altering building height, fraction of impervious surface, and initial boundary-layer depth. First results show that for high initial urban boundary-layer depths compared to the rural boundary-layer depth, the urban column can be much windier than its rural counterpart: i.e. the urban Wind Island Effect. The effect appears to be most prominent in the morning and the late afternoon (up to 1 m/s), for Local Climate Zones with lower buildings (3 or 7). BUBBLE observations confirm the timing of the Wind Island Effect, though with weaker magnitude.

Analysis of Urban Expansion of the Resort City of Al Ain Using Remote Sensing and GIS

NASA Astrophysics Data System (ADS)

Issa, S.; Al Shuwaihi, A.

2009-12-01

The urban growth of AL Ain city has been investigated using remote sensing data for three different dates, 1972, 1990 and 2000. We used three Landsat images together with socio-economic data in a post-classification analysis to map the spatial dynamics of land use/cover changes and identify the urbanization process in Al Ain resort city, United Arab Emirates. Land use/cover statistics, extracted from Landsat Multi-spectral Scanner (MSS). Thematic Mapper (TM) and Enhanced Thematic Mapper plus (ETM +) images for 1972. 1990 and 2000 respectively, revealed that the built-up area has expanded by about 170.53km2. The city was found to have a tendency for major expansion in four different directions: along the Abu Dhabi highway, along Dubai highway, Myziad direction and Hafeet recreational area. Expansion in any direction was found to be governed by the availability of road network, suitability for construction, utilities, economic activities, geographical constraints, and legal factors (boundary with Sultanate of Oman). The road network in particular has influenced the spatial patterns and structure of urban development, so that the expansion of the built-up areas has assumed an accretive as well as linear growth along the major roads. The research concludes that the development is based on conservation of agricultural areas (oases) and reclamation of the desert for farming and agricultural activities. The integration of remote sensing and GIS was found to be effective in monitoring LULC changes and providing valuable information necessary for planning and research.

An urban approach to planetary boundaries.

PubMed

Hoornweg, Daniel; Hosseini, Mehdi; Kennedy, Christopher; Behdadi, Azin

2016-09-01

The achievement of global sustainable development goals subject to planetary boundaries will mostly be determined by cities as they drive cultures, economies, material use, and waste generation. Locally relevant, applied and quantitative methodologies are critical to capture the complexity of urban infrastructure systems, global inter-connections, and to monitor local and global progress toward sustainability. An urban monitoring (and communications) tool is presented here illustrating that a city-based approach to sustainable development is possible. Following efforts to define and quantify safe planetary boundaries in areas such as climate change, biosphere integrity, and freshwater use, this paper modifies the methodology to propose boundaries from a city's perspective. Socio-economic boundaries, or targets, largely derived from the Sustainable Development Goals are added to bio-physical boundaries. Issues such as data availability, city priorities, and ease of implementation are considered. The framework is trialed for Toronto, Shanghai, Sao Paulo, Mumbai, and Dakar, as well as aggregated for the world's larger cities. The methodology provides an important tool for cities to play a more fulsome and active role in global sustainable development.

Modelling of surface fluxes and Urban Boundary Layer over an old mediterannean city core

NASA Astrophysics Data System (ADS)

Lemonsu, A.; Masson, V.; Grimmond, Cs. B.

2003-04-01

In the frameworks of the UBL(Urban Boundary Layer)-ESCOMPTE campaign, the Town Energy Balance (TEB) model was run in off-line mode for Marseille. TEB's performance is evaluated with observations of surface temperatures and surface energy balance fluxes collected during the campaign. Parameterization improvements allow to better represent the energy exchanges between the air inside the canyon and the atmosphere above the roof level. Then, high resolution Méso-NH simulations are done to study the 3-D structure and the evolution of the Urban Boundary Layer (UBL) over Marseille. Will will give a special attention to the impact of the seabord effects (sea-breeze circulation) on the UBL.

Seasonal associations with urban light pollution for nocturnally migrating bird populations.

PubMed

La Sorte, Frank A; Fink, Daniel; Buler, Jeffrey J; Farnsworth, Andrew; Cabrera-Cruz, Sergio A

2017-11-01

The spatial extent and intensity of artificial light at night (ALAN) has increased worldwide through the growth of urban environments. There is evidence that nocturnally migrating birds are attracted to ALAN, and there is evidence that nocturnally migrating bird populations are more likely to occur in urban areas during migration, especially in the autumn. Here, we test if urban sources of ALAN are responsible, at least in part, for these observed urban associations. We use weekly estimates of diurnal occurrence and relative abundance for 40 nocturnally migrating bird species that breed in forested environments in North America to assess how associations with distance to urban areas and ALAN are defined across the annual cycle. Migratory bird populations presented stronger than expected associations with shorter distances to urban areas during migration, and stronger than expected association with higher levels of ALAN outside and especially within urban areas during migration. These patterns were more pronounced during autumn migration, especially within urban areas. Outside of the two migration periods, migratory bird populations presented stronger than expected associations with longer distances to urban areas, especially during the nonbreeding season, and weaker than expected associations with the highest levels of ALAN outside and especially within urban areas. These findings suggest that ALAN is associated with higher levels of diurnal abundance along the boundaries and within the interior of urban areas during migration, especially in the autumn when juveniles are undertaking their first migration journey. These findings support the conclusion that urban sources of ALAN can broadly effect migratory behavior, emphasizing the need to better understand the implications of ALAN for migratory bird populations. © 2017 John Wiley & Sons Ltd.

BUDEM: an urban growth simulation model using CA for Beijing metropolitan area

NASA Astrophysics Data System (ADS)

Long, Ying; Shen, Zhenjiang; Du, Liqun; Mao, Qizhi; Gao, Zhanping

2008-10-01

It is in great need of identifying the future urban form of Beijing, which faces challenges of rapid growth in urban development projects implemented in Beijing. We develop Beijing Urban Developing Model (BUDEM in short) to support urban planning and corresponding policies evaluation. BUDEM is the spatio-temporal dynamic model for simulating urban growth in Beijing metropolitan area, using cellular automata (CA) and Multi-agent system (MAS) approaches. In this phase, the computer simulation using CA in Beijing metropolitan area is conducted, which attempts to provide a premise of urban activities including different kinds of urban development projects for industrial plants, shopping facilities, houses. In the paper, concept model of BUDEM is introduced, which is established basing on prevalent urban growth theories. The method integrating logistic regression and MonoLoop is used to retrieve weights in the transition rule by MCE. After model sensibility analysis, we apply BUDEM into three aspects of urban planning practices: (1) Identifying urban growth mechanism in various historical phases since 1986; (2) Identifying urban growth policies needed to implement desired urban form (BEIJING2020), namely planned urban form; (3) Simulating urban growth scenarios of 2049 (BEIJING2049) basing on the urban form and parameter set of BEIJING2020.

Wind-Tunnel Modeling of Flow Diffusion over an Urban Complex.

DTIC Science & Technology

URBAN AREAS, *ATMOSPHERIC MOTION, *AIR POLLUTION, ATMOSPHERIC MOTION, WIND TUNNEL MODELS, HEAT, DIFFUSION , TURBULENT BOUNDARY LAYER, WIND, SKIN FRICTION, MATHEMATICAL MODELS, URBAN PLANNING, INDIANA.

Development of concepts for the management of shallow geothermal resources in urban areas - Experience gained from the Basel and Zaragoza case studies

NASA Astrophysics Data System (ADS)

García-Gil, Alejandro; Epting, Jannis; Mueller, Matthias H.; Huggenberger, Peter; Vázquez-Suñé, Enric

2015-04-01

In urban areas the shallow subsurface often is used as a heat resource (shallow geothermal energy), i.e. for the installation and operation of a broad variety of geothermal systems. Increasingly, groundwater is used as a low-cost heat sink, e.g. for building acclimatization. Together with other shallow geothermal exploitation systems significantly increased groundwater temperatures have been observed in many urban areas (urban heat island effect). The experience obtained from two selected case study cities in Basel (CH) and Zaragoza (ES) has allowed developing concepts and methods for the management of thermal resources in urban areas. Both case study cities already have a comprehensive monitoring network operating (hydraulics and temperature) as well as calibrated high-resolution numerical groundwater flow and heat-transport models. The existing datasets and models have allowed to compile and compare the different hydraulic and thermal boundary conditions for both groundwater bodies, including: (1) River boundaries (River Rhine and Ebro), (2) Regional hydraulic and thermal settings, (3) Interaction with the atmosphere under consideration of urbanization and (4) Anthropogenic quantitative and thermal groundwater use. The potential natural states of the considered groundwater bodies also have been investigated for different urban settings and varying processes concerning groundwater flow and thermal regimes. Moreover, concepts for the management of thermal resources in urban areas and the transferability of the applied methods to other urban areas are discussed. The methods used provide an appropriate selection of parameters (spatiotemporal resolution) that have to be measured for representative interpretations of groundwater flow and thermal regimes of specific groundwater bodies. From the experience acquired from the case studies it is shown that understanding the variable influences of the specific geological and hydrogeological as well as hydraulic and thermal boundary conditions in urban settings is crucial. It also could be shown that good quality data are necessary to appropriately define and investigate thermal boundary conditions and the temperature development in urban systems. Groundwater temperatures in both investigated groundwater bodies are already over-heated and essentially impede further thermal groundwater use for cooling purposes. Current legislation approaches are not suitable to evaluate new concessions for thermal exploitation. Therefore, novel approaches for the assessment of new concessions which take into account the complex interaction of natural boundaries as well as existing shallow geothermal systems have to be developed.

Boundary layer temperature measurements of a noctual urban boundary layer

NASA Astrophysics Data System (ADS)

Holloway, Simon; Ricketts, Hugo; Vaughan, Geraint

2018-04-01

A low-power lidar system based in Manchester, United Kingdom has been developed to measure temperature profiles in the nocturnal urban boundary layer. The lidar transmitter uses a 355nm diode-pumped solid state Nd:YAG laser and two narrow-band interference filters in the receiver filter out rotational Raman lines that are dependent on temperature. The spectral response of the lidar is calibrated using a monochromator. Temperature profiles measured by the system are calibrated by comparison to co-located radiosondes.

The dynamics of heatwave over a coastal megacity

NASA Astrophysics Data System (ADS)

Ramamurthy, P.

2017-12-01

A majority of the current population in the U.S. resides in urban areas and nearly 40% live in urban coastal communities. These cities are disproportionately affected by extreme events such as heatwaves, hurricanes and extreme precipitation. The microclimate of the coastal cities is profoundly influenced by the interaction between the highly convective urban core and the moist sea breeze advection. However, such interactions are poorly characterized due to lack of observations over these complex terrains. Herein we use a comprehensive observational platform and numerical simulations to characterize the impact of heatwaves over New York City. As part of the campaign the urban boundary layer over New York City was continuously monitored during July 2016, a period that witnessed three heatwave events. Surface weather stations and indoor sensors were also used to characterize the urban heat island intensity. Our results reveal that during the month, the urban heat island intensity was nearly twice as compared to the decadal average. During the heatwave episodes urban heat island intensities as high as 10 ˚C were observed. The thermal profiles indicate elevated temperatures in much of the boundary layer between 800-2500 m during the heatwave episodes. The profiles indicate a complex thermal structure and high intra-city variability. Thermal internal boundary layer was observed in neighborhoods populated by tall buildings. The results show that heat released from buildings heating and air conditioning system during extreme heat events can be as high as 18 percent of the overall available energy. Overall the high-pressure system during the heatwave episodes acted as a thermal block and much of the heat generated in the urban surface layer remained within the boundary layer, thereby amplifying the near surface air temperature.

The hydrometeorological implications of zoning laws: Can land use regulations of urban density and sprawl improve a city's resilience?

NASA Astrophysics Data System (ADS)

Bou-Zeid, E.; Ryu, Y. H.; Smith, J. A.; Newburn, D. A.

2015-12-01

The intensification of heat waves and of the hydrological cycle due to global climate change pose particularly high risks to urban residents. Cities are already hotter than their surroundings due to the urban heat island effect and are known to result in local intensification of rainfall and flooding due to their coupled impacts on the surface and the lower atmosphere. These interacting local and global changes can adversely affect the health and well being of urban residents, and city administrators are increasing efforts to mitigate and adapt to the potential disruptions though various infrastructure and preparedness programs. However, as cities worldwide continue to expand, a key decision is how to manage that urban sprawl and regulate its spatial features to aid in the mitigation and adaptation effort. This study assesses whether alternative zoning regulations that modify the density and extent of a metropolitan region, but have a minimal impact on total population and demographic growth, have an appreciable impact on its response to extreme weather events, and as such, whether they can be used to increase urban resilience. We consider Baltimore (the city and its surrounding suburbs), which in 1967 adopted one of the first urban growth boundaries (UGBs) in the United States, as our test case. Departing from the urban extent circa 1900, we create alternative land use patterns that, compared to the actual current land use baseline, would have resulted from drastically different policy scenarios and approaches to zoning that the city would have undertaken. We consider various alternatives where the city is smaller and denser, due to stricter regulation, versus larger and less dense than the actual baseline, while maintaining the same total population. Our findings indicate that lower densities have significant benefits: compared to the current landscape and to denser patterns, they reduce both extreme temperatures during heat waves and spatio-temporal rainfall peaks. While the particular findings hold for Baltimore and many cities with comparable climates, the conclusion that zoning laws and the resulting spatial patterns for urban density have important implications on a city's response to changing climate and extreme weather are more broadly applicable.

Quantifying urban growth patterns in Hanoi using landscape expansion modes and time series spatial metrics.

PubMed

Nong, Duong H; Lepczyk, Christopher A; Miura, Tomoaki; Fox, Jefferson M

2018-01-01

Urbanization has been driven by various social, economic, and political factors around the world for centuries. Because urbanization continues unabated in many places, it is crucial to understand patterns of urbanization and their potential ecological and environmental impacts. Given this need, the objectives of our study were to quantify urban growth rates, growth modes, and resultant changes in the landscape pattern of urbanization in Hanoi, Vietnam from 1993 to 2010 and to evaluate the extent to which the process of urban growth in Hanoi conformed to the diffusion-coalescence theory. We analyzed the spatiotemporal patterns and dynamics of the built-up land in Hanoi using landscape expansion modes, spatial metrics, and a gradient approach. Urbanization was most pronounced in the periods of 2001-2006 and 2006-2010 at a distance of 10 to 35 km around the urban center. Over the 17 year period urban expansion in Hanoi was dominated by infilling and edge expansion growth modes. Our findings support the diffusion-coalescence theory of urbanization. The shift of the urban growth areas over time and the dynamic nature of the spatial metrics revealed important information about our understanding of the urban growth process and cycle. Furthermore, our findings can be used to evaluate urban planning policies and aid in urbanization issues in rapidly urbanizing countries.

Urban emissions of water vapor in winter

NASA Astrophysics Data System (ADS)

Salmon, Olivia E.; Shepson, Paul B.; Ren, Xinrong; Marquardt Collow, Allison B.; Miller, Mark A.; Carlton, Annmarie G.; Cambaliza, Maria O. L.; Heimburger, Alexie; Morgan, Kristan L.; Fuentes, Jose D.; Stirm, Brian H.; Grundman, Robert; Dickerson, Russell R.

2017-09-01

Elevated water vapor (H2Ov) mole fractions were occasionally observed downwind of Indianapolis, IN, and the Washington, D.C.-Baltimore, MD, area during airborne mass balance experiments conducted during winter months between 2012 and 2015. On days when an urban H2Ov excess signal was observed, H2Ov emission estimates range between 1.6 × 104 and 1.7 × 105 kg s-1 and account for up to 8.4% of the total (background + urban excess) advected flow of atmospheric boundary layer H2Ov from the urban study sites. Estimates of H2Ov emissions from combustion sources and electricity generation facility cooling towers are 1-2 orders of magnitude smaller than the urban H2Ov emission rates estimated from observations. Instances of urban H2Ov enhancement could be a result of differences in snowmelt and evaporation rates within the urban area, due in part to larger wintertime anthropogenic heat flux and land cover differences, relative to surrounding rural areas. More study is needed to understand why the urban H2Ov excess signal is observed on some days, and not others. Radiative transfer modeling indicates that the observed urban enhancements in H2Ov and other greenhouse gas mole fractions contribute only 0.1°C d-1 to the urban heat island at the surface. This integrated warming through the boundary layer is offset by longwave cooling by H2Ov at the top of the boundary layer. While the radiative impacts of urban H2Ov emissions do not meaningfully influence urban heat island intensity, urban H2Ov emissions may have the potential to alter downwind aerosol and cloud properties.

Urban Emissions of Water Vapor in Winter.

PubMed

Salmon, Olivia E; Shepson, Paul B; Ren, Xinrong; Marquardt Collow, Allison B; Miller, Mark A; Carlton, Annmarie G; Cambaliza, Maria O L; Heimburger, Alexie; Morgan, Kristan L; Fuentes, Jose D; Stirm, Brian H; Grundman, Robert; Dickerson, Russell R

2017-09-16

Elevated water vapor (H 2 O v ) mole fractions were occassionally observed downwind of Indianapolis, IN, and the Washington, D.C.-Baltimore, MD, area during airborne mass balance experiments conducted during winter months between 2012 and 2015. On days when an urban H 2 O v excess signal was observed, H 2 O v emissions estimates range between 1.6 × 10 4 and 1.7 × 10 5 kg s -1 , and account for up to 8.4% of the total (background + urban excess) advected flow of atmospheric boundary layer H 2 O v from the urban study sites. Estimates of H 2 O v emissions from combustion sources and electricity generation facility cooling towers are 1-2 orders of magnitude smaller than the urban H 2 O v emission rates estimated from observations. Instances of urban H 2 O v enhancement could be a result of differences in snowmelt and evaporation rates within the urban area, due in part to larger wintertime anthropogenic heat flux and land cover differences, relative to surrounding rural areas. More study is needed to understand why the urban H 2 O v excess signal is observed on some days, and not others. Radiative transfer modeling indicates that the observed urban enhancements in H 2 O v and other greenhouse gas mole fractions contribute only 0.1°C day -1 to the urban heat island at the surface. This integrated warming through the boundary layer is offset by longwave cooling by H 2 O v at the top of the boundary layer. While the radiative impacts of urban H 2 O v emissions do not meaningfully influence urban heat island intensity, urban H 2 O v emissions may have the potential to alter downwind aerosol and cloud properties.

A Century of the Evolution of the Urban Area in Shenyang, China

PubMed Central

Liu, Miao; Xu, Yanyan; Hu, Yuanman; Li, Chunlin; Sun, Fengyun; Chen, Tan

2014-01-01

Analyzing spatiotemporal characteristics of the historical urbanization process is essential in understanding the dynamics of urbanization and scientifically planned urban development. Based on historical urban area maps and remote sensing images, this study examined the urban expansion of Shenyang from 1910 to 2010 using area statistics, typology identification, and landscape metrics approaches. The population and gross domestic product were analyzed as driving factors. The results showed that the urban area of Shenyang increased 43.39-fold during the study period and that the growth rate has accelerated since the 1980s. Three urban growth types were distinguished: infilling, edge-expansion, and spontaneous growth. Edge-expansion was the primary growth type. Infilling growth became the main growth type in the periods 1946–70, 1988–97, and 2004–10. Spontaneous growth was concentrated in the period of 1997 to 2000. The results of landscape metrics indicate that the urban landscape of Shenyang originally was highly aggregated, but has become increasingly fragmented. The urban fringe area was the traditional hot zone of urbanization. Shenyang was mainly located north of the Hun River before 1980; however, the south side of the river has been the hot zone of urbanization since the 1980s. The increase of urban area strongly correlated with the growth of GDP and population. Over a long time scale, the urbanization process has been affected by major historical events. PMID:24893167

An urban systems framework to assess the trans-boundary food-energy-water nexus: implementation in Delhi, India

NASA Astrophysics Data System (ADS)

Ramaswami, Anu; Boyer, Dana; Singh Nagpure, Ajay; Fang, Andrew; Bogra, Shelly; Bakshi, Bhavik; Cohen, Elliot; Rao-Ghorpade, Ashish

2017-02-01

This paper develops a generalizable systems framework to analyze the food-energy-water (FEW) nexus from an urban systems perspective, connecting in- and trans-boundary interactions, quantifying multiple environmental impacts of community-wide FEW provisioning to cities, and visualizing FEW supply-chain risks posed to cities by the environment. Delhi’s community-wide food demand includes household consumption by socio-economic-strata, visitors- and industrial food-use. This demand depends 90%, 76%, and 86% on trans-boundary supply of FEW, respectively. Supply chain data reveal unique features of trans-boundary FEW production regions (e.g. irrigation-electricity needs and GHG intensities of power-plants), yielding supply chain-informed coupled energy-water-GHG footprints of FEW provisioning to Delhi. Agri-food supply contributes to both GHG (19%) and water-footprints (72%-82%) of Delhi’s FEW provisioning, with milk, rice and wheat dominating these footprints. Analysis of FEW interactions within Delhi found >75% in-boundary water-use for food is for urban agriculture and >76% in-boundary energy-use for food is from cooking fuels. Food waste-to-energy and energy-intensity of commercial and industrial food preparation are key data gaps. Visualizing supply chains shows >75% of water embodied in Delhi’s FEW supply is extracted from locations over-drafting ground water. These baseline data enable evaluation of future urban FEW scenarios, comparing impacts of demand shifts, production shifts, and emerging technologies and policies, within and outside of cities.

Numerical modeling of the sound fields in urban squares

NASA Astrophysics Data System (ADS)

Kang, Jian

2005-06-01

This paper studies the basic characteristics of sound fields in urban squares surrounded by reflecting building façades and the effectiveness of architectural changes and urban design options. A radiosity model and an image source model are developed, and a parametric study is carried out in hypothetical squares. The results show that the reverberation time (RT) is rather even in a square, whereas the early decay time (EDT) is very low in the near field, and then becomes close to RT after a rapid increase. Compared to diffuse boundaries, with geometrical boundaries the RT and EDT are significantly longer and the sound pressure level (SPL) attenuation with distance is generally smaller unless the height/side ratio is high. With a boundary diffusion coefficient of 0.2, the sound field is already close to that resulting from purely diffusely reflecting boundaries. The SPL in far field is typically 6-9 dB lower if the square side is doubled; 8 dB lower if the height of building façades is decreased from 50 m to 6 m (diffuse boundaries); 5 dB (diffuse boundaries) or 2 dB (geometrical boundaries) lower if the length/width ratio is increased from 1 to 4; and 10-12 dB lower if the boundary absorption coefficient is increased from 0.1 to 0.9. .

Numerical modeling of the sound fields in urban squares.

PubMed

Kang, Jian

2005-06-01

This paper studies the basic characteristics of sound fields in urban squares surrounded by reflecting building façades and the effectiveness of architectural changes and urban design options. A radiosity model and an image source model are developed, and a parametric study is carried out in hypothetical squares. The results show that the reverberation time (RT) is rather even in a square, whereas the early decay time (EDT) is very low in the near field, and then becomes close to RT after a rapid increase. Compared to diffuse boundaries, with geometrical boundaries the RT and EDT are significantly longer and the sound pressure level (SPL) attenuation with distance is generally smaller unless the height/side ratio is high. With a boundary diffusion coefficient of 0.2, the sound field is already close to that resulting from purely diffusely reflecting boundaries. The SPL in far field is typically 6-9 dB lower if the square side is doubled; 8 dB lower if the height of building façades is decreased from 50 m to 6 m (diffuse boundaries); 5 dB (diffuse boundaries) or 2 dB (geometrical boundaries) lower if the length/width ratio is increased from 1 to 4; and 10-12 dB lower if the boundary absorption coefficient is increased from 0.1 to 0.9.

Prediction of Land use changes using CA in GIS Environment

NASA Astrophysics Data System (ADS)

Kiavarz Moghaddam, H.; Samadzadegan, F.

2009-04-01

Urban growth is a typical self-organized system that results from the interaction between three defined systems; developed urban system, natural non-urban system and planned urban system. Urban growth simulation for an artificial city is carried out first. It evaluates a number of urban sprawl parameters including the size and shape of neighborhood besides testing different types of constraints on urban growth simulation. The results indicate that circular-type neighborhood shows smoother but faster urban growth as compared to nine-cell Moore neighborhood. Cellular Automata is proved to be very efficient in simulating the urban growth simulation over time. The strength of this technology comes from the ability of urban modeler to implement the growth simulation model, evaluating the results and presenting the output simulation results in visual interpretable environment. Artificial city simulation model provides an excellent environment to test a number of simulation parameters such as neighborhood influence on growth results and constraints role in driving the urban growth .Also, CA rules definition is critical stage in simulating the urban growth pattern in a close manner to reality. CA urban growth simulation and prediction of Tehran over the last four decades succeeds to simulate specified tested growth years at a high accuracy level. Some real data layer have been used in the CA simulation training phase such as 1995 while others used for testing the prediction results such as 2002. Tuning the CA growth rules is important through comparing the simulated images with the real data to obtain feedback. An important notice is that CA rules need also to be modified over time to adapt to the urban growth pattern. The evaluation method used on region basis has its advantage in covering the spatial distribution component of the urban growth process. Next step includes running the developed CA simulation over classified raster data for three years in a developed ArcGIS extention. A set of crisp rules are defined and calibrated based on real urban growth pattern. Uncertainty analysis is performed to evaluate the accuracy of the simulated results as compared to the historical real data. Evaluation shows promising results represented by the high average accuracies achieved. The average accuracy for the predicted growth images 1964 and 2002 is over 80 %. Modifying CA growth rules over time to match the growth pattern changes is important to obtain accurate simulation. This modification is based on the urban growth relationship for Tehran over time as can be seen in the historical raster data. The feedback obtained from comparing the simulated and real data is crucial in identifying the optimal set of CA rules for reliable simulation and calibrating growth steps.

Quantifying urban growth patterns in Hanoi using landscape expansion modes and time series spatial metrics

PubMed Central

Lepczyk, Christopher A.; Miura, Tomoaki; Fox, Jefferson M.

2018-01-01

Urbanization has been driven by various social, economic, and political factors around the world for centuries. Because urbanization continues unabated in many places, it is crucial to understand patterns of urbanization and their potential ecological and environmental impacts. Given this need, the objectives of our study were to quantify urban growth rates, growth modes, and resultant changes in the landscape pattern of urbanization in Hanoi, Vietnam from 1993 to 2010 and to evaluate the extent to which the process of urban growth in Hanoi conformed to the diffusion-coalescence theory. We analyzed the spatiotemporal patterns and dynamics of the built-up land in Hanoi using landscape expansion modes, spatial metrics, and a gradient approach. Urbanization was most pronounced in the periods of 2001–2006 and 2006–2010 at a distance of 10 to 35 km around the urban center. Over the 17 year period urban expansion in Hanoi was dominated by infilling and edge expansion growth modes. Our findings support the diffusion-coalescence theory of urbanization. The shift of the urban growth areas over time and the dynamic nature of the spatial metrics revealed important information about our understanding of the urban growth process and cycle. Furthermore, our findings can be used to evaluate urban planning policies and aid in urbanization issues in rapidly urbanizing countries. PMID:29734346

Landscape urbanization and economic growth in China: positive feedbacks and sustainability dilemmas.

PubMed

Bai, Xuemei; Chen, Jing; Shi, Peijun

2012-01-03

Accelerating urbanization has been viewed as an important instrument for economic development and reducing regional income disparity in some developing countries, including China. Recent studies (Bloom et al. 2008) indicate that demographic urbanization level has no causal effect on economic growth. However, due to the varying and changing definition of urban population, the use of demographic indicators as a sole representing indicator for urbanization might be misleading. Here, we re-examine the causal relationship between urbanization and economic growth in Chinese cities and provinces in recent decades, using built-up areas as a landscape urbanization indicator. Our analysis shows that (1) larger cities, both in terms of population size and built-up area, and richer cities tend to gain more income, have larger built-up area expansion, and attract more population, than poorer cities or smaller cities; and (2) that there is a long-term bidirectional causality between urban built-up area expansion and GDP per capita at both city and provincial level, and a short-term bidirectional causality at provincial level, revealing a positive feedback between landscape urbanization and urban and regional economic growth in China. Our results suggest that urbanization, if measured by a landscape indicator, does have causal effect on economic growth in China, both within the city and with spillover effect to the region, and that urban land expansion is not only the consequences of economic growth in cities, but also drivers of such growth. The results also suggest that under its current economic growth model, it might be difficult for China to control urban expansion without sacrificing economic growth, and China's policy to stop the loss of agricultural land, for food security, might be challenged by its policy to promote economic growth through urbanization.

Landscape Urbanization and Economic Growth in China: Positive Feedbacks and Sustainability Dilemmas

PubMed Central

2011-01-01

Accelerating urbanization has been viewed as an important instrument for economic development and reducing regional income disparity in some developing countries, including China. Recent studies (Bloom et al. 2008) indicate that demographic urbanization level has no causal effect on economic growth. However, due to the varying and changing definition of urban population, the use of demographic indicators as a sole representing indicator for urbanization might be misleading. Here, we re-examine the causal relationship between urbanization and economic growth in Chinese cities and provinces in recent decades, using built-up areas as a landscape urbanization indicator. Our analysis shows that (1) larger cities, both in terms of population size and built-up area, and richer cities tend to gain more income, have larger built-up area expansion, and attract more population, than poorer cities or smaller cities; and (2) that there is a long-term bidirectional causality between urban built-up area expansion and GDP per capita at both city and provincial level, and a short-term bidirectional causality at provincial level, revealing a positive feedback between landscape urbanization and urban and regional economic growth in China. Our results suggest that urbanization, if measured by a landscape indicator, does have causal effect on economic growth in China, both within the city and with spillover effect to the region, and that urban land expansion is not only the consequences of economic growth in cities, but also drivers of such growth. The results also suggest that under its current economic growth model, it might be difficult for China to control urban expansion without sacrificing economic growth, and China’s policy to stop the loss of agricultural land, for food security, might be challenged by its policy to promote economic growth through urbanization. PMID:22103244

Irradiation-induced grain growth and defect evolution in nanocrystalline zirconia with doped grain boundaries

DOE PAGES

Dey, Sanchita; Mardinly, John; Wang, Yongqiang; ...

2016-05-27

Grain boundaries are effective sinks for radiation-induced defects, ultimately impacting the radiation tolerance of nanocrystalline materials (dense materials with nanosized grains) against net defect accumulation. However, irradiation-induced grain growth leads to grain boundary area decrease, shortening potential benefits of nanostructures. A possible approach to mitigate this is the introduction of dopants to target a decrease in grain boundary mobility or a reduction in grain boundary energy to eliminate driving forces for grain growth (using similar strategies as to control thermal growth). Here, in this study, we tested this concept in nanocrystalline zirconia doped with lanthanum. Although the dopant is observedmore » to segregate to the grain boundaries, causing grain boundary energy decrease and promoting dragging forces for thermally activated boundary movement, irradiation induced grain growth could not be avoided under heavy ion irradiation, suggesting a different growth mechanism as compared to thermal growth. Furthermore, it is apparent that reducing the grain boundary energy reduced the effectiveness of the grain boundary as sinks, and the number of defects in the doped material is higher than in undoped (La-free) YSZ.« less

Application of Lidar and other profiling techniques to study the impact that Severe weather hazards have on the New York City built environment

NASA Astrophysics Data System (ADS)

Arend, Mark; Campmier, Mark; Fernandez, Aris; Moshary, Fred

2018-04-01

The complexity of urban boundary layer dynamics poses challenges to those responsible for the design and regulation of buildings and structures in the urban environment. Lidar systems in the New York City Metropolitan region have been used extensively to study urban boundary layer dynamics. These systems, in conjunction with other sensing platforms can provide an observatory to perform research and analysis of turbulent and inclement weather patterns of interest to developers and agencies.

Large-eddy simulation of the urban boundary layer in the MEGAPOLI Paris Plume experiment

NASA Astrophysics Data System (ADS)

Esau, Igor

2010-05-01

This study presents results from the specific large-eddy simulation study of the urban boundary layer in the MEGAPOLI Paris Plume field campaign. We used LESNIC and PALM codes, MEGAPOLI city morphology database, nudging to the observed meteorological conditions during the Paris Plume campaign and some concentration measurements from that campaign to simulate and better understand the nature of the urban boundary layer on scales larger then the street canyon scales. The primary attention was paid to turbulence self-organization and structure-to-surface interaction. The study has been aimed to demonstrate feasibility and estimate required resources for such research. Therefore, at this stage we do not compare the simulation with other relevant studies as well as we do not formulate the theoretical conclusions.

Radiative transfer in a polluted urban planetary boundary layer

NASA Technical Reports Server (NTRS)

Viskanta, R.; Johnson, R. O.; Bergstrom, R. W.

1977-01-01

Radiative transfer in a polluted urban atmosphere is studied using a dynamic model. The diurnal nature of radiative transfer for summer conditions is simulated for an urban area 40 km in extent and the effects of various parameters arising in the problem are investigated. The results of numerical computations show that air pollution has the potential of playing a major role in the radiative regime of the urban area. Absorption of solar energy by aerosols in realistic models of urban atmosphere are of the same order of magnitude as that due to water vapor. The predicted effect of the air pollution aerosol in the city is to warm the earth-atmosphere system, and the net effect of gaseous pollutant is to warm the surface and cool the planetary boundary layer, particularly near the top.

Driving factors of urban land growth in Guangzhou and its implications for sustainable development

NASA Astrophysics Data System (ADS)

Cui, Xuezhu; Li, Shaoying; Wang, Xuetong; Xue, Xiaolong

2018-04-01

Since 2000, China's urban land has expanded at a dramatic speed because of the country's rapid urbanization. The country has been experiencing unbalanced development between rural and urban areas, causing serious challenges such as agricultural security and land resources waste. Effectively evaluating the driving factors of urban land growth is essential for improving efficient land use management and sustainable urban development. This study established a principal component regression model based on eight indicators to identify their influences on urban land growth in Guangzhou. The results provided a grouping analysis of the driving factors, and found that economic growth, urban population, and transportation development are the driving forces of urban land growth of Guangzhou, while the tertiary industry has an opposite effect. The findings led to further suggestions and recommendations for urban sustainable development. Hence, local governments should design relevant policies for achieving the rational development of urban land use and strategic planning on urban sustainable development.

Analysis of the division of the urban-rural ecotone in the city of Zhuhai

NASA Astrophysics Data System (ADS)

Cui, Nan; Zhou, Sulong; Guo, Luo

2018-02-01

In this study, a high-resolution remote sensing image of downtown Zhuhai (2010) was used to analyze the division of the urban-rural ecotone. Based on the information entropy theory, the study analyzed the characteristics of the ecotone’s land use and entropy value distribution, the break entropy values of the inner and outer boundary, as determined by mutation detection, were 0.51 and 0.46, respectively, providing a range for the rough classification of the rural-urban ecotone. The results showed that the boundaries of the ecotone were dynamic and the landscape turbulence of the urban fringe in the section between rural and urban areas was greater than that of the core area and imagery area of Zhuhai city. We concluded that this study provided technical support for urban planning and administration in the city of Zhuhai.

China's bullet trains facilitate market integration and mitigate the cost of megacity growth.

PubMed

Zheng, Siqi; Kahn, Matthew E

2013-04-02

Megacity growth in the developing world is fueled by a desire to access their large local labor markets. Growing megacities suffer from high levels of traffic congestion and pollution, which degrade local quality of life. Transportation technology that allows individuals to access the megacity without living within its boundaries offers potentially large social benefits, because individuals can enjoy the benefits of urban agglomeration while not paying megacity real estate rents and suffering from the city's social costs. This paper presents evidence supporting the claim that China's bullet trains are playing this role. The bullet train is regarded as one of the most significant technological breakthroughs in passenger transportation developed in the second half of the 20th century. Starting in 2007, China has introduced several new bullet trains that connect megacities such as Beijing, Shanghai, and Guangzhou with nearby cities. Through facilitating market integration, bullet trains will stimulate the development of second- and third-tier cities. By offering households and firms a larger menu of location alternatives, bullet trains help to protect the quality of life of the growing urban population. We document that this transport innovation is associated with rising real estate prices in the nearby secondary cities.

40 CFR 63.775 - Reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... source is located in an urban cluster with 10,000 people or more; the distance in miles to the nearest urbanized area boundary if the source is not located in an urban cluster with 10,000 people or more; and the names of the nearest urban cluster with 10,000 people or more and nearest urbanized area. (ii...

24 CFR 598.210 - What certifications must governments make?

Code of Federal Regulations, 2014 CFR

2014-04-01

... make? 598.210 Section 598.210 Housing and Urban Development Regulations Relating to Housing and Urban... DESIGNATIONS Nomination Procedure § 598.210 What certifications must governments make? Certifications must be... urban area satisfies the boundary tests of § 598.100(d); (b) The nominated urban area is one of...

Growth Scenarios for the City of Guangzhou, China: Transferability and Confirmability

NASA Astrophysics Data System (ADS)

Lehner, A.; Kraus, V.; Wei, C.; Steinnocher, K.

2016-09-01

This work deals with the development of urban growth scenarios and the prevision of the spatial distribution of built-up area and population for the urban area of the city of Guangzhou in China. Using freely-available data, including remotely sensed data as well as census data from the ground, expenditure of time and costs shall remain low. Guangzhou, one of the biggest cities within the Pearl River Delta, has faced an enormous economic and urban growth during the last three decades. Due to its economical and spatial characteristics it is a promising candidate for urban growth scenarios. The monitoring and prediction of urban growth comprises data of population and give them a spatial representation. The model, originally applied for the Indian city Ahmedabad, is used for urban growth scenarios. Therefore, transferability and confirmability of the model are evaluated. Challenges that may occur by transferring a model for urban growth from one region to another are discussed. With proposing the use of urban remote sensing and freely available data, urban planners shall be fitted with a comprehensible and simple tool to be able to contribute to the future challenge Smart Growth.

Modelling urban growth in the Indo-Gangetic plain using nighttime OLS data and cellular automata

NASA Astrophysics Data System (ADS)

Roy Chowdhury, P. K.; Maithani, Sandeep

2014-12-01

The present study demonstrates the applicability of the Operational Linescan System (OLS) sensor in modelling urban growth at regional level. The nighttime OLS data provides an easy, inexpensive way to map urban areas at a regional scale, requiring a very small volume of data. A cellular automata (CA) model was developed for simulating urban growth in the Indo-Gangetic plain; using OLS data derived maps as input. In the proposed CA model, urban growth was expressed in terms of causative factors like economy, topography, accessibility and urban infrastructure. The model was calibrated and validated based on OLS data of year 2003 and 2008 respectively using spatial metrics measures and subsequently the urban growth was predicted for the year 2020. The model predicted high urban growth in North Western part of the study area, in south eastern part growth would be concentrated around two cities, Kolkata and Howrah. While in the middle portion of the study area, i.e., Jharkhand, Bihar and Eastern Uttar Pradesh, urban growth has been predicted in form of clusters, mostly around the present big cities. These results will not only provide an input to urban planning but can also be utilized in hydrological and ecological modelling which require an estimate of future built up areas especially at regional level.

Urban growth in Korea, 1970-1980: an application of the human ecological perspective.

PubMed

Ko, S H

1994-07-01

This study supports the ecological perspective proposed by Duncan (population, environment, organization, and technology) explaining urban population growth. Data were obtained from the 1970 and 1980 Korean Population Census and Korean Municipal Yearbook on cities with a minimum size of 20,000-50,000 people (108 cities and towns). Urban growth is most strongly influenced by indigenous labor surplus and the population potential of the city to be in contact with another city. Nine multiple regression variables explained just under 66% of the variance in urban growth. Net migration was influential among those aged 15-24 years. The extent of differentiation of industry affected net migration only among those aged 15-24 years and those aged 35-44 years. Population redistribution was more affected directly by changes in industrial organization, and migration was affected indirectly by environmental and technological effects on organization. Urban growth through migration of older age groups was affected by government expenditure on public works. Urban growth was not much affected by transportation/communication concentration, manufacturing concentration, urban labor surplus, population size, and site. Urban growth was viewed as the interaction between the unemployment rate and the urban wage, following Todaro's equilibrium models. In Korea, larger cities only grew faster during the 1960s. By the 1970s, upper middle-sized cities grew faster. Location was not a significant factor in explaining urban growth, but growth was rapid along a corridor within 100 km from Seoul and 50 km from Pusan, the second largest city in Korea. Caution was urged in interpreting Korea's ecological urban growth patterns as indicative of developing countries.

Climate change accelerates growth of urban trees in metropolises worldwide.

PubMed

Pretzsch, Hans; Biber, Peter; Uhl, Enno; Dahlhausen, Jens; Schütze, Gerhard; Perkins, Diana; Rötzer, Thomas; Caldentey, Juan; Koike, Takayoshi; Con, Tran van; Chavanne, Aurélia; Toit, Ben du; Foster, Keith; Lefer, Barry

2017-11-13

Despite the importance of urban trees, their growth reaction to climate change and to the urban heat island effect has not yet been investigated with an international scope. While we are well informed about forest growth under recent conditions, it is unclear if this knowledge can be simply transferred to urban environments. Based on tree ring analyses in ten metropolises worldwide, we show that, in general, urban trees have undergone accelerated growth since the 1960s. In addition, urban trees tend to grow more quickly than their counterparts in the rural surroundings. However, our analysis shows that climate change seems to enhance the growth of rural trees more than that of urban trees. The benefits of growing in an urban environment seem to outweigh known negative effects, however, accelerated growth may also mean more rapid ageing and shortened lifetime. Thus, city planners should adapt to the changed dynamics in order to secure the ecosystem services provided by urban trees.

Modeling urban growth by the use of a multiobjective optimization approach: environmental and economic issues for the Yangtze watershed, China.

PubMed

Zhang, Wenting; Wang, Haijun; Han, Fengxiang; Gao, Juan; Nguyen, Thuminh; Chen, Yarong; Huang, Bo; Zhan, F Benjamin; Zhou, Lequn; Hong, Song

2014-11-01

Urban growth is an unavoidable process caused by economic development and population growth. Traditional urban growth models represent the future urban growth pattern by repeating the historical urban growth regulations, which can lead to a lot of environmental problems. The Yangtze watershed is the largest and the most prosperous economic area in China, and it has been suffering from rapid urban growth from the 1970s. With the built-up area increasing from 23,238 to 31,054 km(2) during the period from 1980 to 2005, the watershed has suffered from serious nonpoint source (NPS) pollution problems, which have been mainly caused by the rapid urban growth. To protect the environment and at the same time maintain the economic development, a multiobjective optimization (MOP) is proposed to tradeoff the multiple objectives during the urban growth process of the Yangtze watershed. In particular, the four objectives of minimization of NPS pollution, maximization of GDP value, minimization of the spatial incompatibility between the land uses, and minimization of the cost of land-use change are considered by the MOP approach. Conventionally, a genetic algorithm (GA) is employed to search the Pareto solution set. In our MOP approach, a two-dimensional GA, rather than the traditional one-dimensional GA, is employed to assist with the search for the spatial optimization solution, where the land-use cells in the two-dimensional space act as genes in the GA. Furthermore, to confirm the superiority of the MOP approach over the traditional prediction approaches, a widely used urban growth prediction model, cellular automata (CA), is also carried out to allow a comparison with the Pareto solution of MOP. The results indicate that the MOP approach can make a tradeoff between the multiple objectives and can achieve an optimal urban growth pattern for Yangtze watershed, while the CA prediction model just represents the historical urban growth pattern as the future growth pattern. Moreover, according to the spatial clustering index, the urban growth pattern predicted through MOP is more reasonable. In summary, the proposed model provides a set of Pareto urban growth solutions, which compromise environmental and economic issues for the Yangtze watershed.

Land Cover Change and Remote Sensing in the Classroom: An Exercise to Study Urban Growth

ERIC Educational Resources Information Center

Delahunty, Tina; Lewis-Gonzales, Sarah; Phelps, Jack; Sawicki, Ben; Roberts, Charles; Carpenter, Penny

2012-01-01

The processes and implications of urban growth are studied in a variety of disciplines as urban growth affects both the physical and human landscape. Remote sensing methods provide ways to visualize and mathematically represent urban growth; and resultant land cover change data enable both quantitative and qualitative analysis. This article helps…

Quantitative Analysis of Intra Urban Growth Modeling using socio economic agents by combining cellular automata model with agent based model

NASA Astrophysics Data System (ADS)

Singh, V. K.; Jha, A. K.; Gupta, K.; Srivastav, S. K.

2017-12-01

Recent studies indicate that there is a significant improvement in the urban land use dynamics through modeling at finer spatial resolutions. Geo-computational models such as cellular automata and agent based model have given evident proof regarding the quantification of the urban growth pattern with urban boundary. In recent studies, socio- economic factors such as demography, education rate, household density, parcel price of the current year, distance to road, school, hospital, commercial centers and police station are considered to the major factors influencing the Land Use Land Cover (LULC) pattern of the city. These factors have unidirectional approach to land use pattern which makes it difficult to analyze the spatial aspects of model results both quantitatively and qualitatively. In this study, cellular automata model is combined with generic model known as Agent Based Model to evaluate the impact of socio economic factors on land use pattern. For this purpose, Dehradun an Indian city is selected as a case study. Socio economic factors were collected from field survey, Census of India, Directorate of economic census, Uttarakhand, India. A 3X3 simulating window is used to consider the impact on LULC. Cellular automata model results are examined for the identification of hot spot areas within the urban area and agent based model will be using logistic based regression approach where it will identify the correlation between each factor on LULC and classify the available area into low density, medium density, high density residential or commercial area. In the modeling phase, transition rule, neighborhood effect, cell change factors are used to improve the representation of built-up classes. Significant improvement is observed in the built-up classes from 84 % to 89 %. However after incorporating agent based model with cellular automata model the accuracy improved from 89 % to 94 % in 3 classes of urban i.e. low density, medium density and commercial classes. Sensitivity study of the model indicated that southern and south-west part of the city have shown improvement and small patches of growth are also observed in the north western part of the city.The study highlights the growing importance of socio economic factors and geo-computational modeling approach on changing LULC of newly growing cities of modern India.

Spatiotemporal Variability in Observations of Urban Mixed-Layer Heights from Surface-based Lidar Systems during DISCOVER-AQ 2011

NASA Astrophysics Data System (ADS)

Lewis, J. R.; Banks, R. F.; Berkoff, T.; Welton, E. J.; Joseph, E.; Thompson, A. M.; Decola, P.; Hegarty, J. D.

2015-12-01

Accurate characterization of the planetary boundary layer height is crucial for numerical weather prediction, estimating pollution emissions and modeling air quality. More so, given the increasing trend in global urban populations, there is a growing need to improve our understanding of the urban boundary layer structure and development. The Deriving Information on Surface conditions from COlumn and VERtically resolved observations relevant to Air Quality (DISCOVER-AQ) 2011 field campaign, which took place in the Baltimore-Washington DC region, offered a unique opportunity to study boundary layer processes in an urban area using a geographically dense collection of surface-based lidar systems (see figure). Lidars use aerosols as tracers for atmospheric boundary layer dynamics with high vertical and temporal resolutions. In this study, we use data from two permanent Micropulse Lidar Network (MPLNET) sites and five field deployed Micropulse lidar (MPL) systems in order to observe spatiotemporal variations in the daytime mixed layer height. We present and compare lidar-derived retrievals of the mixed layer height using two different methods. The first method uses the wavelet covariance transform and a "fuzzy logic" attribution scheme in order to determine the mixed layer height. The second method uses an objective approach utilizing a time-adaptive extended Kalman filter. Independent measurements of the boundary layer height are obtained using profiles from ozonesonde launches at the Beltsville and Edgewood sites for comparison with lidar observations.

Comparison between the atmospheric boundary layer in Paris and its rural suburbs during the ECLAP experiment

NASA Astrophysics Data System (ADS)

Dupont, E.; Menut, L.; Carissimo, B.; Pelon, J.; Flamant, P.

The ECLAP experiment has been performed during the winter of 1995 in order to study the influence of the urban area of Paris on the vertical structure and diurnal evolution of the atmospheric boundary layer, in situations favourable to intense urban heat island and pollution increase. One urban site and one rural site have been instrumented with sodars, lidars and surface measurements. Additional radiosondes, 100 m masts and Eiffel Tower data were also collected. This paper gives a general overview of this experiment, and presents results of the analysis of four selected days, characterized by various wind directions and temperature inversion strengths. This analysis, which consists in a comparison between data obtained in the two sites, has been focused on three parameters of importance to the ABL dynamics: the standard deviation of vertical velocity, the surface sensible heat flux, and the boundary layer height. The vertical component of turbulence is shown to be enhanced by the urban area, the amplitude of this effect strongly depending on the meteorological situation. The sensible heat flux in Paris is generally found larger than in the rural suburbs. The most frequent differences range from 25-65 W m -2, corresponding to relative differences of 20-60%. The difference of unstable boundary layer height between both sites are most of the time less than 100 m. However, sodar and temperature data show that the urban influence is enhanced during night-time and transitions between stable and unstable regimes.

Development of high-resolution multi-scale modelling system for simulation of coastal-fluvial urban flooding

NASA Astrophysics Data System (ADS)

Comer, Joanne; Indiana Olbert, Agnieszka; Nash, Stephen; Hartnett, Michael

2017-02-01

Urban developments in coastal zones are often exposed to natural hazards such as flooding. In this research, a state-of-the-art, multi-scale nested flood (MSN_Flood) model is applied to simulate complex coastal-fluvial urban flooding due to combined effects of tides, surges and river discharges. Cork city on Ireland's southwest coast is a study case. The flood modelling system comprises a cascade of four dynamically linked models that resolve the hydrodynamics of Cork Harbour and/or its sub-region at four scales: 90, 30, 6 and 2 m. Results demonstrate that the internalization of the nested boundary through the use of ghost cells combined with a tailored adaptive interpolation technique creates a highly dynamic moving boundary that permits flooding and drying of the nested boundary. This novel feature of MSN_Flood provides a high degree of choice regarding the location of the boundaries to the nested domain and therefore flexibility in model application. The nested MSN_Flood model through dynamic downscaling facilitates significant improvements in accuracy of model output without incurring the computational expense of high spatial resolution over the entire model domain. The urban flood model provides full characteristics of water levels and flow regimes necessary for flood hazard identification and flood risk assessment.

Boundary-Spanning Actors in Urban 4-H: An Action Research Case Study

ERIC Educational Resources Information Center

David, Victoria Dotson

2014-01-01

Today's Cooperative Extension organization continues to face challenges of providing relevant, quality programming in urban communities. Challenges include the ability to build capacity in Extension's urban youth educators to assess and interpret the unique, variable needs of urban clients and to communicate effectively the identified…

An Improved Simulation of the Diurnally Varying Street Canyon Flow

NASA Astrophysics Data System (ADS)

Yaghoobian, Neda; Kleissl, Jan; Paw U, Kyaw Tha

2012-11-01

The impact of diurnal variation of temperature distribution over building and ground surfaces on the wind flow and scalar transport in street canyons is numerically investigated using the PArallelized LES Model (PALM). The Temperature of Urban Facets Indoor-Outdoor Building Energy Simulator (TUF-IOBES) is used for predicting urban surface heat fluxes as boundary conditions for a modified version of PALM. TUF-IOBES dynamically simulates indoor and outdoor building surface temperatures and heat fluxes in an urban area taking into account weather conditions, indoor heat sources, building and urban material properties, composition of the building envelope (e.g. windows, insulation), and HVAC equipment. Temperature (and heat flux) distribution over urban surfaces of the 3-D raster-type geometry of TUF-IOBES makes it possible to provide realistic, high resolution boundary conditions for the numerical simulation of flow and scalar transport in an urban canopy. Compared to some previous analyses using uniformly distributed thermal forcing associated with urban surfaces, the present analysis shows that resolving non-uniform thermal forcings can provide more detailed and realistic patterns of the local air flow and pollutant dispersion in urban canyons.

Monitoring urban expansion and its effects on land use and land cover changes in Guangzhou city, China.

PubMed

Wu, Yanyan; Li, Shuyuan; Yu, Shixiao

2016-01-01

There are widespread concerns about urban sprawl in China. In response, modeling and assessing urban expansion and subsequent land use and land cover (LULC) changes have become important approaches to support decisions about appropriate development and land resource use. Guangzhou, a major metropolitan city in South China, has experienced rapid urbanization and great economic growth in the past few decades. This study applied a series of Landsat images to assess the urban expansion and subsequent LULC changes over 35 years, from 1979 to 2013. From start to end, urban expansion increased by 1512.24 km(2) with an annual growth rate of 11.25 %. There were four stages of urban growth: low rates from 1979 to 1990, increased rates from 1990 to 2001, high rates from 2001 to 2009, and steady increased rates from 2009 to 2013. There were also three different urban growth types in these different stages: edge-expansion growth, infilling growth, and spontaneous growth. Other land cover, such as cropland, forest, and mosaics of cropland and natural vegetation, were severely impacted as a result. To analyze these changes, we used landscape metrics to characterize the changes in the spatial patterns across the Guangzhou landscape and the impacts of urban growth on other types of land cover. The significant changes in LULC and urban expansion were highly correlated with economic development, population growth, technical progress, policy elements, and other similar indexes.

Observations of Urban Heat Island Mitigation in California Coastal Cities due to a Sea Breeze Induced Coastal-Cooling ``REVERSE-REACTION'' to Global Warming

NASA Astrophysics Data System (ADS)

Bornstein, R. D.; Lebassi, B.; Gonzalez, J.

2010-12-01

The study evaluated long-term (1948-2005) air temperatures at over 300 urban and rural sites in California (CA) during summer (June-August, JJA). The aggregate CA results showed asymmetric warming, as daily min temperatures increased faster than daily max temperatures. The spatial distributions of daily max temperatures in the heavily urbanized South Coast and San Francisco Bay Area air basins, however, exhibited a complex pattern, with cooling at low-elevation (mainly urban) coastal-areas and warming at (mainly rural) inland areas. Previous studies have suggested that cooling summer max temperatures in CA were due to increased irrigation, coastal upwelling, or cloud cover. The current hypothesis, however, is that this temperature pattern arises from a “reverse-reaction” to greenhouse gas (GHG) induced global-warming. In this hypothesis, the global warming of inland areas resulted in an increased (cooling) sea breeze activity in coastal areas. That daytime summer coastal cooling was seen in coastal urban areas implies that urban heat island (UHI) warming was weaker than the reverse-reaction sea breeze cooling; if there was no UHI effect, then the cooling would have been even stronger. Analysis of daytime summer max temperatures at four adjacent pairs of urban and rural sites near the inland cooling-warming boundary, however, showed that the rural sites experienced cooling, while the urban sites showed warming due to UHI development. The rate of heat island growth was estimated as the sum of each urban warming rate and the absolute magnitude of the concurrent adjacent rural cooling rate. Values ranged from 0.12 to 0.55 K decade-1, and were proportional to changes in urban population and urban extent. As Sacramento, Modesto, Stockton, and San José have grown in aerial extent (21 to 59%) and population (40 to 118%), part of the observed increased JJA max values could be due to increased daytime UHI-intensity. Without UHI effects, the currently observed JJA SFBA coastal-cooling area might have expanded to include these sites, as the first three are adjacent to rural airport sites that showed cooling max-values due to increased marine influences. In addition, all urbanized sites with decreasing max-values would probably show even larger cooling rates if UHI effects could be removed. Significant societal impacts may result from this observed reverse-reaction to GHG-warming. Possible beneficial effects (especially during periods of UHI growth) include decreased maximum: O3 levels, per-capita energy requirements for cooling, and human thermal-stress levels.

The Impact of Urban Growth and Climate Change on Heat Stress in an Australian City

NASA Astrophysics Data System (ADS)

Chapman, S.; Mcalpine, C. A.; Thatcher, M. J.; Salazar, A.; Watson, J. R.

2017-12-01

Over half of the world's population lives in urban areas. Most people will therefore be exposed to climate change in an urban environment. One of the climate risks facing urban residents is heat stress, which can lead to illness and death. Urban residents are at increased risk of heat stress due to the urban heat island effect. The urban heat island is a modification of the urban environment and increases temperatures on average by 2°C, though the increase can be much higher, up to 8°C when wind speeds and cloud cover are low. The urban heat island is also expected to increase in the future due to urban growth and intensification, further exacerbating urban heat stress. Climate change alters the urban heat island due to changes in weather (wind speed and cloudiness) and evapotranspiration. Future urban heat stress will therefore be affected by urban growth and climate change. The aim of this study was to examine the impact of urban growth and climate change on the urban heat island and heat stress in Brisbane, Australia. We used CCAM, the conformal cubic atmospheric model developed by the CSIRO, to examine temperatures in Brisbane using scenarios of urban growth and climate change. We downscaled the urban climate using CCAM, based on bias corrected Sea Surface Temperatures from the ACCESS1.0 projection of future climate. We used Representative Concentration Pathway (RCP) 8.5 for the periods 1990 - 2000, 2049 - 2060 and 2089 - 2090 with current land use and an urban growth scenario. The present day climatology was verified using weather station data from the Australian Bureau of Meteorology. We compared the urban heat island of the present day with the urban heat island with climate change to determine if climate change altered the heat island. We also calculated heat stress using wet-bulb globe temperature and apparent temperature for the climate change and base case scenarios. We found the urban growth scenario increased present day temperatures by 0.5°C in the inner city and by 6°C during a period of hot days. The scenarios of future temperature are ongoing and will show how heat stress will change in Brisbane when both urban growth and climate change are considered.

Grain boundary oxidation and fatigue crack growth at elevated temperatures

NASA Technical Reports Server (NTRS)

Liu, H. W.; Oshida, Y.

1986-01-01

Fatigue crack growth rate at elevated temperatures can be accelerated by grain boundary oxidation. Grain boundary oxidation kinetics and the statistical distribution of grain boundary oxide penetration depth were studied. At a constant delta K-level and at a constant test temperature, fatigue crack growth rate, da/dN, is a function of cyclic frequency, nu. A fatigue crack growth model of intermittent micro-ruptures of grain boundary oxide is constructed. The model is consistent with the experimental observations that, in the low frequency region, da/dN is inversely proportional to nu, and fatigue crack growth is intergranular.

Urbanization impacts on mammals across urban-forest edges and a predictive model of edge effects.

PubMed

Villaseñor, Nélida R; Driscoll, Don A; Escobar, Martín A H; Gibbons, Philip; Lindenmayer, David B

2014-01-01

With accelerating rates of urbanization worldwide, a better understanding of ecological processes at the wildland-urban interface is critical to conserve biodiversity. We explored the effects of high and low-density housing developments on forest-dwelling mammals. Based on habitat characteristics, we expected a gradual decline in species abundance across forest-urban edges and an increased decline rate in higher contrast edges. We surveyed arboreal mammals in sites of high and low housing density along 600 m transects that spanned urban areas and areas turn on adjacent native forest. We also surveyed forest controls to test whether edge effects extended beyond our edge transects. We fitted models describing richness, total abundance and individual species abundance. Low-density housing developments provided suitable habitat for most arboreal mammals. In contrast, high-density housing developments had lower species richness, total abundance and individual species abundance, but supported the highest abundances of an urban adapter (Trichosurus vulpecula). We did not find the predicted gradual decline in species abundance. Of four species analysed, three exhibited no response to the proximity of urban boundaries, but spilled over into adjacent urban habitat to differing extents. One species (Petaurus australis) had an extended negative response to urban boundaries, suggesting that urban development has impacts beyond 300 m into adjacent forest. Our empirical work demonstrates that high-density housing developments have negative effects on both community and species level responses, except for one urban adapter. We developed a new predictive model of edge effects based on our results and the literature. To predict animal responses across edges, our framework integrates for first time: (1) habitat quality/preference, (2) species response with the proximity to the adjacent habitat, and (3) spillover extent/sensitivity to adjacent habitat boundaries. This framework will allow scientists, managers and planners better understand and predict both species responses across edges and impacts of development in mosaic landscapes.

Urbanization Impacts on Mammals across Urban-Forest Edges and a Predictive Model of Edge Effects

PubMed Central

Villaseñor, Nélida R.; Driscoll, Don A.; Escobar, Martín A. H.; Gibbons, Philip; Lindenmayer, David B.

2014-01-01

With accelerating rates of urbanization worldwide, a better understanding of ecological processes at the wildland-urban interface is critical to conserve biodiversity. We explored the effects of high and low-density housing developments on forest-dwelling mammals. Based on habitat characteristics, we expected a gradual decline in species abundance across forest-urban edges and an increased decline rate in higher contrast edges. We surveyed arboreal mammals in sites of high and low housing density along 600 m transects that spanned urban areas and areas turn on adjacent native forest. We also surveyed forest controls to test whether edge effects extended beyond our edge transects. We fitted models describing richness, total abundance and individual species abundance. Low-density housing developments provided suitable habitat for most arboreal mammals. In contrast, high-density housing developments had lower species richness, total abundance and individual species abundance, but supported the highest abundances of an urban adapter (Trichosurus vulpecula). We did not find the predicted gradual decline in species abundance. Of four species analysed, three exhibited no response to the proximity of urban boundaries, but spilled over into adjacent urban habitat to differing extents. One species (Petaurus australis) had an extended negative response to urban boundaries, suggesting that urban development has impacts beyond 300 m into adjacent forest. Our empirical work demonstrates that high-density housing developments have negative effects on both community and species level responses, except for one urban adapter. We developed a new predictive model of edge effects based on our results and the literature. To predict animal responses across edges, our framework integrates for first time: (1) habitat quality/preference, (2) species response with the proximity to the adjacent habitat, and (3) spillover extent/sensitivity to adjacent habitat boundaries. This framework will allow scientists, managers and planners better understand and predict both species responses across edges and impacts of development in mosaic landscapes. PMID:24810286

[Spatial equity analysis of urban green space from the perspective of balance between supply and demand: A case study of Futian District, Shenzhen, China.

PubMed

Wu, Jian Sheng; Si, Meng Lin; Li, Wei Feng

2016-09-01

Urban green space is an important ecological landscape, whose spatial distribution plays a significant role in improving the eco-environment and people's living quality. This study was initia-ted from the perspective of supply and demand balance to evaluate the equity of distribution of urban parks, drawing on previous research, and introduced an integrated framework for evaluating the equity of urban public facilities using spatial multi-analysis. A method concerning gravity model to assess the equity of urban green space was introduced, taking the effect of boundary into account. The case study area was the Futian District of Shenzhen and its 2000 m buffer area. Then, some optimizations were suggested for better allocation of the green space. The results showed that the equity of Futian District was low. The equity of community parks was lowest, followed by that of regional parks, while the countryside ecological parks owned the highest equity. About 50% of the Futian district area was in a state of balance between supply and demand and the rest were in a state of insufficient supply. Greening rate and space allocation of parks and road traffic systems should be improved to better plan the green space in Futian District. For urban green space planning, the parks of small area should be paid more attention to meet the needs of residents for daily recreation. By taking the effect of boundary into account, we observed that the residential area on the edge of the study area could enjoy the park green space, and the green space in the boundary area outside the region would be also shared by residents on both sides of the administrative boundary.

Regional Assessment of Urban Impacts on Landcover and Open Space Finds a Smart Urban Growth Policy Performs Little Better than Business as Usual

PubMed Central

Thorne, James H.; Santos, Maria J.; Bjorkman, Jacquelyn H.

2013-01-01

Assessment of landscape change is critical for attainment of regional sustainability goals. Urban growth assessments are needed because over half the global population now lives in cities, which impact biodiversity, ecosystem structure and ecological processes. Open space protection is needed to preserve these attributes, and provide the resources humans need. The San Francisco Bay Area, California, is challenged to accommodate a population increase of 3.07 million while maintaining the region’s ecosystems and biodiversity. Our analysis of 9275 km2 in the Bay Area links historic trends for three measures: urban growth, protected open space, and landcover types over the last 70 years to future 2050 projections of urban growth and open space. Protected open space totaled 348 km2 (3.7% of the area) in 1940, and expanded to 2221 km2 (20.2%) currently. An additional 1038 km2 of protected open space is targeted (35.1%). Urban area historically increased from 396.5 km2 to 2239 km2 (24.1% of the area). Urban growth during this time mostly occurred at the expense of agricultural landscapes (62.9%) rather than natural vegetation. Smart Growth development has been advanced as a preferred alternative in many planning circles, but we found that it conserved only marginally more open space than Business-as-usual when using an urban growth model to portray policies for future urban growth. Scenarios to 2050 suggest urban development on non-urban lands of 1091, 956, or 179 km2, under Business-as-usual, Smart Growth and Infill policy growth scenarios, respectively. The Smart Growth policy converts 88% of natural lands and agriculture used by Business-as-usual, while Infill used only 40% of those lands. Given the historic rate of urban growth, 0.25%/year, and limited space available, the Infill scenario is recommended. While the data may differ, the use of an historic and future framework to track these three variables can be easily applied to other metropolitan areas. PMID:23755204

Regional assessment of urban impacts on landcover and open space finds a smart urban growth policy performs little better than business as usual.

PubMed

Thorne, James H; Santos, Maria J; Bjorkman, Jacquelyn H

2013-01-01

Assessment of landscape change is critical for attainment of regional sustainability goals. Urban growth assessments are needed because over half the global population now lives in cities, which impact biodiversity, ecosystem structure and ecological processes. Open space protection is needed to preserve these attributes, and provide the resources humans need. The San Francisco Bay Area, California, is challenged to accommodate a population increase of 3.07 million while maintaining the region's ecosystems and biodiversity. Our analysis of 9275 km² in the Bay Area links historic trends for three measures: urban growth, protected open space, and landcover types over the last 70 years to future 2050 projections of urban growth and open space. Protected open space totaled 348 km² (3.7% of the area) in 1940, and expanded to 2221 km² (20.2%) currently. An additional 1038 km² of protected open space is targeted (35.1%). Urban area historically increased from 396.5 km² to 2239 km² (24.1% of the area). Urban growth during this time mostly occurred at the expense of agricultural landscapes (62.9%) rather than natural vegetation. Smart Growth development has been advanced as a preferred alternative in many planning circles, but we found that it conserved only marginally more open space than Business-as-usual when using an urban growth model to portray policies for future urban growth. Scenarios to 2050 suggest urban development on non-urban lands of 1091, 956, or 179 km², under Business-as-usual, Smart Growth and Infill policy growth scenarios, respectively. The Smart Growth policy converts 88% of natural lands and agriculture used by Business-as-usual, while Infill used only 40% of those lands. Given the historic rate of urban growth, 0.25%/year, and limited space available, the Infill scenario is recommended. While the data may differ, the use of an historic and future framework to track these three variables can be easily applied to other metropolitan areas.

Comparison of WRF local and nonlocal boundary layer Physics in Greater Kuala Lumpur, Malaysia

NASA Astrophysics Data System (ADS)

Ooi, M. C. G.; Chan, A.; Kumarenthiran, S.; Morris, K. I.; Oozeer, M. Y.; Islam, M. A.; Salleh, S. A.

2018-02-01

The urban boundary layer (UBL) is the internal advection layer of atmosphere above urban region which determines the exchanges of momentum, water and other atmospheric constituents between the urban land surface and the free troposphere. This paper tested the performance of three planetary boundary layer (PBL) physics schemes of Weather Research and Forecast (WRF) software to ensure the appropriate representation of vertical structure of UBL in Greater Kuala Lumpur (GKL). Comparison was conducted on the performance of respective PBL schemes to generate vertical and near-surface weather profile and rainfall. Mellor-Yamada- Janjíc (MYJ) local PBL scheme coupled with Eta MM5 surface layer scheme was found to predict the near-surface temperature and wind profile and mixing height better than the nonlocal schemes during the intermonsoonal period with least influences of the synoptic background weather.

24 CFR 598.425 - Validation of designation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS Post... of any Empowerment Zone. (b) HUD may approve an Empowerment Zone's request for boundary modification...

The effect of urban growth on landscape-scale restoration for a fire-dependent songbird

USGS Publications Warehouse

Pickens, Bradley A.; Marcus, Jeffrey F.; Carpenter, John P.; Anderson, Scott; Taillie, Paul J.; Collazo, Jaime A.

2017-01-01

A landscape-scale perspective on restoration ecology has been advocated, but few studies have informed restoration with landscape metrics or addressed broad-scale threats. Threats such as urban growth may affect restoration effectiveness in a landscape context. Here, we studied longleaf pine savanna in the rapidly urbanizing southeastern United States where a habitat-specialist bird, Bachman's sparrow (Peucaea aestivalis), is closely associated with savanna vegetation structure and frequent fire. Our objectives were to construct a species distribution model for Bachman's sparrow, determine the relationship between fire and urbanization, quantify the urban growth effect (2010–2090), identify potential restoration areas, and determine the interaction between restoration potential and urban growth by 2050. Number of patches, patch size, and isolation metrics were used to evaluate scenarios. The species distribution model was 88% accurate and emphasized multiscale canopy cover characteristics, fire, and percent habitat. Fires were less common <600 m from urban areas, and this fire suppression effect exacerbated urban growth effects. For restoration scenarios, canopy cover reduction by 30% resulted in nearly double the amount of habitat compared to the prescribed fire scenario; canopy cover reduction resulted in larger patch sizes and less patch isolation compared to current conditions. The effect of urban growth on restoration scenarios was unequal. Seventy-four percent of restoration areas from the prescribed fire scenario overlapped with projected urban growth, whereas the canopy cover reduction scenario only overlapped by 9%. We emphasize the benefits of simultaneously considering the effects of urban growth and landscape-scale restoration potential to promote a landscape with greater patch sizes and less isolation.

Mapping and analyzing urban growth in West Africa

NASA Astrophysics Data System (ADS)

Adhikari, P.; de Beurs, K. M.

2014-12-01

Africa has experienced the highest urban growth (~3.5% per year) in the developing world. West Africa in particular has seen significant urban growth mainly driven by the high natural population growth rate and the increasing percentage of population moving to urban areas. Urban growth in West Africa is expected to continue in decades to come. This study uses Landsat data at five different time steps (1970, 1980, 1990, 2000, and 2010) to map four cities from four different eco-regions of West Africa since the early 1970s. The selected four cities, Kumasi in Ghana, Abuja in Nigeria, Tahoua in Niger and Ouagadoughou in Burkina Faso, are some of the fastest growing cities in the region. We selected the cities in the following ecoregions: Eastern Guinean Forest, Guinean Forest-Savanna Mosaic, Sahelian Acacia Savanna and West Sudanian Savanna. We hypothesize that urban growth in West Africa is different compared to the other parts of the world primarily due to the dependency of about 60 percent of active labor force on subsistence agriculture in the region. As agriculture productivity is dependent on favorable climatic conditions (i.e., good rainfall, suitable temperature), any variability in climate impends the livelihood of subsistence farmers triggering the movements of more people towards the cities. Therefore, studying urban growth based on ecoregions help to better explain the urban development in West Africa. After mapping the urban areas, this study makes a comparative analysis of the temporal and spatial pattern of the urban growths across the ecoregions in West Africa.

[Recognition of landscape characteristic scale based on two-dimension wavelet analysis].

PubMed

Gao, Yan-Ni; Chen, Wei; He, Xing-Yuan; Li, Xiao-Yu

2010-06-01

Three wavelet bases, i. e., Haar, Daubechies, and Symlet, were chosen to analyze the validity of two-dimension wavelet analysis in recognizing the characteristic scales of the urban, peri-urban, and rural landscapes of Shenyang. Owing to the transform scale of two-dimension wavelet must be the integer power of 2, some characteristic scales cannot be accurately recognized. Therefore, the pixel resolution of images was resampled to 3, 3.5, 4, and 4.5 m to densify the scale in analysis. It was shown that two-dimension wavelet analysis worked effectively in checking characteristic scale. Haar, Daubechies, and Symle were the optimal wavelet bases to the peri-urban landscape, urban landscape, and rural landscape, respectively. Both Haar basis and Symlet basis played good roles in recognizing the fine characteristic scale of rural landscape and in detecting the boundary of peri-urban landscape. Daubechies basis and Symlet basis could be also used to detect the boundary of urban landscape and rural landscape, respectively.

Modeling and predicting urban growth pattern of the Tokyo metropolitan area based on cellular automata

NASA Astrophysics Data System (ADS)

Zhao, Yaolong; Zhao, Junsan; Murayama, Yuji

2008-10-01

The period of high economic growth in Japan which began in the latter half of the 1950s led to a massive migration of population from rural regions to the Tokyo metropolitan area. This phenomenon brought about rapid urban growth and urban structure changes in this area. Purpose of this study is to establish a constrained CA (Cellular Automata) model with GIS (Geographical Information Systems) to simulate urban growth pattern in the Tokyo metropolitan area towards predicting urban form and landscape for the near future. Urban land-use is classified into multi-categories for interpreting the effect of interaction among land-use categories in the spatial process of urban growth. Driving factors of urban growth pattern, such as land condition, railway network, land-use zoning, random perturbation, and neighborhood interaction and so forth, are explored and integrated into this model. These driving factors are calibrated based on exploratory spatial data analysis (ESDA), spatial statistics, logistic regression, and "trial and error" approach. The simulation is assessed at both macro and micro classification levels in three ways: visual approach; fractal dimension; and spatial metrics. Results indicate that this model provides an effective prototype to simulate and predict urban growth pattern of the Tokyo metropolitan area.

Prevalent vegetation growth enhancement in urban environment.

PubMed

Zhao, Shuqing; Liu, Shuguang; Zhou, Decheng

2016-05-31

Urbanization, a dominant global demographic trend, leads to various changes in environments (e.g., atmospheric CO2 increase, urban heat island). Cities experience global change decades ahead of other systems so that they are natural laboratories for studying responses of other nonurban biological ecosystems to future global change. However, the impacts of urbanization on vegetation growth are not well understood. Here, we developed a general conceptual framework for quantifying the impacts of urbanization on vegetation growth and applied it in 32 Chinese cities. Results indicated that vegetation growth, as surrogated by satellite-observed vegetation index, decreased along urban intensity across all cities. At the same time, vegetation growth was enhanced at 85% of the places along the intensity gradient, and the relative enhancement increased with urban intensity. This growth enhancement offset about 40% of direct loss of vegetation productivity caused by replacing productive vegetated surfaces with nonproductive impervious surfaces. In light of current and previous field studies, we conclude that vegetation growth enhancement is prevalent in urban settings. Urban environments do provide ideal natural laboratories to observe biological responses to environmental changes that are difficult to mimic in manipulative experiments. However, one should be careful in extrapolating the finding to nonurban environments because urban vegetation is usually intensively managed, and attribution of the responses to diverse driving forces will be challenging but must be pursued.

Prevalent vegetation growth enhancement in urban environment

PubMed Central

Zhao, Shuqing; Liu, Shuguang; Zhou, Decheng

2016-01-01

Urbanization, a dominant global demographic trend, leads to various changes in environments (e.g., atmospheric CO2 increase, urban heat island). Cities experience global change decades ahead of other systems so that they are natural laboratories for studying responses of other nonurban biological ecosystems to future global change. However, the impacts of urbanization on vegetation growth are not well understood. Here, we developed a general conceptual framework for quantifying the impacts of urbanization on vegetation growth and applied it in 32 Chinese cities. Results indicated that vegetation growth, as surrogated by satellite-observed vegetation index, decreased along urban intensity across all cities. At the same time, vegetation growth was enhanced at 85% of the places along the intensity gradient, and the relative enhancement increased with urban intensity. This growth enhancement offset about 40% of direct loss of vegetation productivity caused by replacing productive vegetated surfaces with nonproductive impervious surfaces. In light of current and previous field studies, we conclude that vegetation growth enhancement is prevalent in urban settings. Urban environments do provide ideal natural laboratories to observe biological responses to environmental changes that are difficult to mimic in manipulative experiments. However, one should be careful in extrapolating the finding to nonurban environments because urban vegetation is usually intensively managed, and attribution of the responses to diverse driving forces will be challenging but must be pursued. PMID:27185955

24 CFR 597.101 - Data utilized for eligibility determinations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... HOUSING AND URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES AND ENTERPRISE COMMUNITIES... for designation as an Empowerment Zone or Enterprise Community must coincide with the boundaries of...

24 CFR 597.101 - Data utilized for eligibility determinations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... HOUSING AND URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES AND ENTERPRISE COMMUNITIES... for designation as an Empowerment Zone or Enterprise Community must coincide with the boundaries of...

24 CFR 597.101 - Data utilized for eligibility determinations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... HOUSING AND URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES AND ENTERPRISE COMMUNITIES... for designation as an Empowerment Zone or Enterprise Community must coincide with the boundaries of...

24 CFR 597.101 - Data utilized for eligibility determinations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... HOUSING AND URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES AND ENTERPRISE COMMUNITIES... for designation as an Empowerment Zone or Enterprise Community must coincide with the boundaries of...

24 CFR 597.101 - Data utilized for eligibility determinations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... HOUSING AND URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES AND ENTERPRISE COMMUNITIES... for designation as an Empowerment Zone or Enterprise Community must coincide with the boundaries of...

The ecological foundations of transmission potential and vector-borne disease in urban landscapes.

PubMed

LaDeau, Shannon L; Allan, Brian F; Leisnham, Paul T; Levy, Michael Z

2015-07-01

Urban transmission of arthropod-vectored disease has increased in recent decades. Understanding and managing transmission potential in urban landscapes requires integration of sociological and ecological processes that regulate vector population dynamics, feeding behavior, and vector-pathogen interactions in these unique ecosystems. Vectorial capacity is a key metric for generating predictive understanding about transmission potential in systems with obligate vector transmission. This review evaluates how urban conditions, specifically habitat suitability and local temperature regimes, and the heterogeneity of urban landscapes can influence the biologically-relevant parameters that define vectorial capacity: vector density, survivorship, biting rate, extrinsic incubation period, and vector competence.Urban landscapes represent unique mosaics of habitat. Incidence of vector-borne disease in urban host populations is rarely, if ever, evenly distributed across an urban area. The persistence and quality of vector habitat can vary significantly across socio-economic boundaries to influence vector species composition and abundance, often generating socio-economically distinct gradients of transmission potential across neighborhoods.Urban regions often experience unique temperature regimes, broadly termed urban heat islands (UHI). Arthropod vectors are ectothermic organisms and their growth, survival, and behavior are highly sensitive to environmental temperatures. Vector response to UHI conditions is dependent on regional temperature profiles relative to the vector's thermal performance range. In temperate climates UHI can facilitate increased vector development rates while having countervailing influence on survival and feeding behavior. Understanding how urban heat island (UHI) conditions alter thermal and moisture constraints across the vector life cycle to influence transmission processes is an important direction for both empirical and modeling research.There remain persistent gaps in understanding of vital rates and drivers in mosquito-vectored disease systems, and vast holes in understanding for other arthropod vectored diseases. Empirical studies are needed to better understand the physiological constraints and socio-ecological processes that generate heterogeneity in critical transmission parameters, including vector survival and fitness. Likewise, laboratory experiments and transmission models must evaluate vector response to realistic field conditions, including variability in sociological and environmental conditions.

Growth Control: Some Questions for Urban Decisionmakers.

ERIC Educational Resources Information Center

Levine, Robert A.

This report is intended to provide urban decisionmakers--mayors, city managers, planning directors, key staff and line officials, city councilmen--and citizen groups with a guide to some of the issues that surround the effort to bring urban growth under control. The report attempts to be neutral in regard to whether urban growth should be…

Numerical Modelling of the Sound Fields in Urban Streets with Diffusely Reflecting Boundaries

NASA Astrophysics Data System (ADS)

KANG, J.

2002-12-01

A radiosity-based theoretical/computer model has been developed to study the fundamental characteristics of the sound fields in urban streets resulting from diffusely reflecting boundaries, and to investigate the effectiveness of architectural changes and urban design options on noise reduction. Comparison between the theoretical prediction and the measurement in a scale model of an urban street shows very good agreement. Computations using the model in hypothetical rectangular streets demonstrate that though the boundaries are diffusely reflective, the sound attenuation along the length is significant, typically at 20-30 dB/100 m. The sound distribution in a cross-section is generally even unless the cross-section is very close to the source. In terms of the effectiveness of architectural changes and urban design options, it has been shown that over 2-4 dB extra attenuation can be obtained either by increasing boundary absorption evenly or by adding absorbent patches on the façades or the ground. Reducing building height has a similar effect. A gap between buildings can provide about 2-3 dB extra sound attenuation, especially in the vicinity of the gap. The effectiveness of air absorption on increasing sound attenuation along the length could be 3-9 dB at high frequencies. If a treatment is effective with a single source, it is also effective with multiple sources. In addition, it has been demonstrated that if the façades in a street are diffusely reflective, the sound field of the street does not change significantly whether the ground is diffusely or geometrically reflective.

Methods for specifying spatial boundaries of cities in the world: The impacts of delineation methods on city sustainability indices.

PubMed

Uchiyama, Yuta; Mori, Koichiro

2017-08-15

The purpose of this paper is to analyze how different definitions and methods for delineating the spatial boundaries of cities have an impact on the values of city sustainability indicators. It is necessary to distinguish the inside of cities from the outside when calculating the values of sustainability indicators that assess the impacts of human activities within cities on areas beyond their boundaries. For this purpose, spatial boundaries of cities should be practically detected on the basis of a relevant definition of a city. Although no definition of a city is commonly shared among academic fields, three practical methods for identifying urban areas are available in remote sensing science. Those practical methods are based on population density, landcover, and night-time lights. These methods are correlated, but non-negligible differences exist in their determination of urban extents and urban population. Furthermore, critical and statistically significant differences in some urban environmental sustainability indicators result from the three different urban detection methods. For example, the average values of CO 2 emissions per capita and PM 10 concentration in cities with more than 1 million residents are significantly different among the definitions. When analyzing city sustainability indicators and disseminating the implication of the results, the values based on the different definitions should be simultaneously investigated. It is necessary to carefully choose a relevant definition to analyze sustainability indicators for policy making. Otherwise, ineffective and inefficient policies will be developed. Copyright © 2017 Elsevier B.V. All rights reserved.

The effect of urban growth on landscape-scale restoration for a fire-dependent songbird.

PubMed

Pickens, Bradley A; Marcus, Jeffrey F; Carpenter, John P; Anderson, Scott; Taillie, Paul J; Collazo, Jaime A

2017-04-15

A landscape-scale perspective on restoration ecology has been advocated, but few studies have informed restoration with landscape metrics or addressed broad-scale threats. Threats such as urban growth may affect restoration effectiveness in a landscape context. Here, we studied longleaf pine savanna in the rapidly urbanizing southeastern United States where a habitat-specialist bird, Bachman's sparrow (Peucaea aestivalis), is closely associated with savanna vegetation structure and frequent fire. Our objectives were to construct a species distribution model for Bachman's sparrow, determine the relationship between fire and urbanization, quantify the urban growth effect (2010-2090), identify potential restoration areas, and determine the interaction between restoration potential and urban growth by 2050. Number of patches, patch size, and isolation metrics were used to evaluate scenarios. The species distribution model was 88% accurate and emphasized multiscale canopy cover characteristics, fire, and percent habitat. Fires were less common <600 m from urban areas, and this fire suppression effect exacerbated urban growth effects. For restoration scenarios, canopy cover reduction by 30% resulted in nearly double the amount of habitat compared to the prescribed fire scenario; canopy cover reduction resulted in larger patch sizes and less patch isolation compared to current conditions. The effect of urban growth on restoration scenarios was unequal. Seventy-four percent of restoration areas from the prescribed fire scenario overlapped with projected urban growth, whereas the canopy cover reduction scenario only overlapped by 9%. We emphasize the benefits of simultaneously considering the effects of urban growth and landscape-scale restoration potential to promote a landscape with greater patch sizes and less isolation. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

A Meta-Analysis of Global Urban Land Expansion

PubMed Central

Seto, Karen C.; Fragkias, Michail; Güneralp, Burak; Reilly, Michael K.

2011-01-01

The conversion of Earth's land surface to urban uses is one of the most irreversible human impacts on the global biosphere. It drives the loss of farmland, affects local climate, fragments habitats, and threatens biodiversity. Here we present a meta-analysis of 326 studies that have used remotely sensed images to map urban land conversion. We report a worldwide observed increase in urban land area of 58,000 km2 from 1970 to 2000. India, China, and Africa have experienced the highest rates of urban land expansion, and the largest change in total urban extent has occurred in North America. Across all regions and for all three decades, urban land expansion rates are higher than or equal to urban population growth rates, suggesting that urban growth is becoming more expansive than compact. Annual growth in GDP per capita drives approximately half of the observed urban land expansion in China but only moderately affects urban expansion in India and Africa, where urban land expansion is driven more by urban population growth. In high income countries, rates of urban land expansion are slower and increasingly related to GDP growth. However, in North America, population growth contributes more to urban expansion than it does in Europe. Much of the observed variation in urban expansion was not captured by either population, GDP, or other variables in the model. This suggests that contemporary urban expansion is related to a variety of factors difficult to observe comprehensively at the global level, including international capital flows, the informal economy, land use policy, and generalized transport costs. Using the results from the global model, we develop forecasts for new urban land cover using SRES Scenarios. Our results show that by 2030, global urban land cover will increase between 430,000 km2 and 12,568,000 km2, with an estimate of 1,527,000 km2 more likely. PMID:21876770

Observational Analyses of Dramatic Developments of A Severe Air Pollution Event in the Beijing Area

NASA Astrophysics Data System (ADS)

Sun, J.; Li, J.; Zhou, M.; Cheng, Z.; Li, Q.; Cao, X.; Zhang, J.

2017-12-01

A rapid development of a severe air pollution event at the end of November, 2015 was investigated with in situ and remote sensing observations. The analyses indicate that the high PM2.5 air was transported over the urban area by the southwesterly flow above 500 m under the nighttime stable condition with its high concentration centered southeast of Beijing. As the daytime convective turbulent mixing developed over the Beijing urban area in the morning and it transported the upper polluted air downward, leading to the dramatic increase of the PM2.5 concentration in the urban area. Meanwhile, the convective turbulent mixing transported the highly polluted air upward upstream of Beijing, resulting in the horizontal transport of high PM2.5 air into Beijing especially in the afternoon when the stable boundary layer started to develop near the surface. As a result of both turbulent mixing and advection processes with possible aerosol growth from secondary aerosol formation under the low wind and high humidity condition, the PM2.5 concentration reached over 700 µg m-3 at Beijing by the end of the day.

The use of GIS for monitoring and predicting urban growth in east and west St Paul, Winnipeg, Manitoba, Canada.

PubMed

Hathout, S

2002-11-01

Most urban growth in Canada occurs in the urban-rural fringe. The increasing dispersal of the Canadian urban population is due to centrifugal forces pulling urbanites past the suburbs into the surrounding exurban communities. Most Canadian urban centres are located on prime agricultural land. Exurban sprawl devours an inordinate amount of the better agricultural land. The growth around the city of Winnipeg is a case in point. Within Winnipeg's urban field are the rural municipalities of East and West St Paul. The objective of this study is to investigate the impact of urban growth on the agricultural land of these RMs as well as the rate of urban growth in both Municipalities based on database analysis using aerial photographs taken in 1960 and 1989 and Geographic Information System (GIS). East St Paul was found to have a higher rate of urbanization (from 10.14% to 43.75%) between 1960 and 1989 than West St Paul (from 7.36% to 23.57%). The growth prediction using Markov probability chain analysis showed that East St Paul will henceforth experience a reduced rate of increase than West St Paul. The rate of urbanization for both RMs is found to be comparable with areas surrounding other major cities such as Toronto. The largest increases in urban land use categories occurred in and around the existing exurban settlements. It was found that most urbanization take place on the most fertile soil.

Distance-weighted city growth.

PubMed

Rybski, Diego; García Cantú Ros, Anselmo; Kropp, Jürgen P

2013-04-01

Urban agglomerations exhibit complex emergent features of which Zipf's law, i.e., a power-law size distribution, and fractality may be regarded as the most prominent ones. We propose a simplistic model for the generation of citylike structures which is solely based on the assumption that growth is more likely to take place close to inhabited space. The model involves one parameter which is an exponent determining how strongly the attraction decays with the distance. In addition, the model is run iteratively so that existing clusters can grow (together) and new ones can emerge. The model is capable of reproducing the size distribution and the fractality of the boundary of the largest cluster. Although the power-law distribution depends on both, the imposed exponent and the iteration, the fractality seems to be independent of the former and only depends on the latter. Analyzing land-cover data, we estimate the parameter-value γ≈2.5 for Paris and its surroundings.

24 CFR 598.210 - What certifications must governments make?

Code of Federal Regulations, 2013 CFR

2013-04-01

... governments make? 598.210 Section 598.210 Housing and Urban Development Regulations Relating to Housing and... DESIGNATIONS Nomination Procedure § 598.210 What certifications must governments make? Certifications must be... urban area satisfies the boundary tests of § 598.100(d); (b) The nominated urban area is one of...

Understanding Urban Development In Canada. "Understanding Economics" Series No. 3.

ERIC Educational Resources Information Center

Plunkett, T. J.

This booklet for Canadian secondary school students examines urbanization and its relationship to other factors of the economy. Five sections analyze urbanization, the pattern of urban development, community needs, the management of urban growth, and urban governance. Part I traces the growth of the Canadian population, noting that 10% of the…

Modeling individual trees in an urban environment using dense discrete return LIDAR

NASA Astrophysics Data System (ADS)

Bandyopadhyay, Madhurima; van Aardt, Jan A. N.; van Leeuwen, Martin

2015-05-01

The urban forest is becoming increasingly important in the contexts of urban green space, carbon sequestration and offsets, and socio-economic impacts. This has led to a recent increase in attention being paid to urban environmental management. Tree biomass, specifically, is a vital indicator of carbon storage and has a direct impact on urban forest health and carbon sequestration. As an alternative to expensive and time-consuming field surveys, remote sensing has been used extensively in measuring dynamics of vegetation and estimating biomass. Light detection and ranging (LiDAR) has proven especially useful to characterize the three dimensional (3D) structure of forests. In urban contexts however, information is frequently required at the individual tree level, necessitating the proper delineation of tree crowns. Yet, crown delineation is challenging for urban trees where a wide range of stress factors and cultural influences affect growth. In this paper high resolution LiDAR data were used to infer biomass based on individual tree attributes. A multi-tiered delineation algorithm was designed to extract individual tree-crowns. At first, dominant tree segments were obtained by applying watershed segmentation on the crown height model (CHM). Next, prominent tree top positions within each segment were identified via a regional maximum transformation and the crown boundary was estimated for each of the tree tops. Finally, undetected trees were identified using a best-fitting circle approach. After tree delineation, individual tree attributes were used to estimate tree biomass and the results were validated with associated field mensuration data. Results indicate that the overall tree detection accuracy is nearly 80%, and the estimated biomass model has an adjusted-R2 of 0.5.

Urban containment policies and the protection of natural areas: the case of Seoul's greenbelt

Treesearch

David N. Bengston; Yeo-Chang Youn

2006-01-01

Countries around the world have responded to the problems associated with rapid urban growth and increasingly land-consumptive development patterns by creating a wide range of policy instruments designed to manage urban growth. Of the array of growth management techniques, urban containment policies are considered by some to be a promising approach. This paper focuses...

Spatiotemporal variability of urban growth factors: A global and local perspective on the megacity of Mumbai

NASA Astrophysics Data System (ADS)

Shafizadeh-Moghadam, Hossein; Helbich, Marco

2015-03-01

The rapid growth of megacities requires special attention among urban planners worldwide, and particularly in Mumbai, India, where growth is very pronounced. To cope with the planning challenges this will bring, developing a retrospective understanding of urban land-use dynamics and the underlying driving-forces behind urban growth is a key prerequisite. This research uses regression-based land-use change models - and in particular non-spatial logistic regression models (LR) and auto-logistic regression models (ALR) - for the Mumbai region over the period 1973-2010, in order to determine the drivers behind spatiotemporal urban expansion. Both global models are complemented by a local, spatial model, the so-called geographically weighted logistic regression (GWLR) model, one that explicitly permits variations in driving-forces across space. The study comes to two main conclusions. First, both global models suggest similar driving-forces behind urban growth over time, revealing that LRs and ALRs result in estimated coefficients with comparable magnitudes. Second, all the local coefficients show distinctive temporal and spatial variations. It is therefore concluded that GWLR aids our understanding of urban growth processes, and so can assist context-related planning and policymaking activities when seeking to secure a sustainable urban future.

The use of LANDSAT data to monitor the urban growth of Sao Paulo Metropolitan area

NASA Technical Reports Server (NTRS)

Dejesusparada, N. (Principal Investigator); Niero, M.; Lombardo, M. A.; Foresti, C.

1982-01-01

Urban growth from 1977 to 1979 of the region between Billings and the Guarapiranga reservoir was mapped and the problematic urban areas identified using several LANDSAT products. Visual and automatic interpretation techniques were applied to the data. Computer compatible tapes of LANDSAT multispectral scanner data were analyzed through the maximum likelihood Gaussian algorithm. The feasibility of monitoring fast urban growth by remote sensing techniques for efficient urban planning and control is demonstrated.

Urban transformation of a metropolis and its environmental impacts: a case study in Shanghai.

PubMed

Tian, Zhan; Cao, Guiying; Shi, Jun; McCallum, Ian; Cui, Linli; Fan, Dongli; Li, Xinhu

2012-06-01

The aim of this paper is to understand the sustainability of urban spatial transformation in the process of rapid urbanization, and calls for future research on the demographic and economic dimensions of climate change. Shanghai towards its transformation to a metropolis has experienced vast socioeconomic and ecological change and calls for future research on the impacts of demographic and economic dimensions on climate change. We look at the major questions (1) to explore economic and demographic growth, land use and land-cover changes in the context of rapid economic and city growth, and (2) to analyze how the demography and economic growth have been associated with the local air temperature and vegetation. We examine urban growth, land use and land-cover changes in the context of rapid economic development and urbanization. We assess the impact of urban expansion on local air temperature and vegetation. The analysis is based on time series data of land use, normalized difference vegetation index (NDVI), and meteorological, demographic and economic data. The results indicate that urban growth has been driven by mass immigration; as a consequence of economic growth and urban expansion, a large amount of farmland has been converted to paved road and residential buildings. Furthermore, the difference between air temperature in urban and exurban areas has increased rapidly. The decrease of high mean annual NDVI has mainly occurred around the dense urban areas.

Microgeographic differentiation in thermal performance curves between rural and urban populations of an aquatic insect.

PubMed

Tüzün, Nedim; Op de Beeck, Lin; Brans, Kristien I; Janssens, Lizanne; Stoks, Robby

2017-12-01

The rapidly increasing rate of urbanization has a major impact on the ecology and evolution of species. While increased temperatures are a key aspect of urbanization ("urban heat islands"), we have very limited knowledge whether this generates differentiation in thermal responses between rural and urban populations. In a common garden experiment, we compared the thermal performance curves (TPCs) for growth rate and mortality in larvae of the damselfly Coenagrion puella from three urban and three rural populations. TPCs for growth rate shifted vertically, consistent with the faster-slower theoretical model whereby the cold-adapted rural larvae grew faster than the warm-adapted urban larvae across temperatures. In line with costs of rapid growth, rural larvae showed lower survival than urban larvae across temperatures. The relatively lower temperatures hence expected shorter growing seasons in rural populations compared to the populations in the urban heat islands likely impose stronger time constraints to reach a certain developmental stage before winter, thereby selecting for faster growth rates. In addition, higher predation rates at higher temperature may have contributed to the growth rate differences between urban and rural ponds. A faster-slower differentiation in TPCs may be a widespread pattern along the urbanization gradient. The observed microgeographic differentiation in TPCs supports the view that urbanization may drive life-history evolution. Moreover, because of the urban heat island effect, urban environments have the potential to aid in developing predictions on the impact of climate change on rural populations.

Analysis of Urban Growth in Edwardsville Illinois Using Remote Sensing and Population Change

NASA Astrophysics Data System (ADS)

Onuoha, Hilda U.

Rapid urbanization is one of the many critical, global issues. This very significant social and economic phenomenon has brought about much debate in the past twenty years and has become a very important policy issue. Understanding its dynamics and patterns is important to develop appropriate policies and make more informed planning decisions. Many dimensions to the urban land growth have been identified in related literature including drivers, relationship with other factors like population, impacts, and methods of measurement. In this study, urban growth in the Edwardsville area (composed of Edwardsville and Glen Carbon, Illinois) is analyzed spatio-temporally using remote sensing and population change from 1990 to 2015. The objectives of this study are (a) identifying the major land use changes in the Edwardsville area from 1990 to 2015, (b) analyzing the rate of urban growth and its relationship to population change in the area from 1990 to 2015, (c) identifying the general pattern and direction of urban growth in the study area. Using multi-temporal satellite images to classify and derive changes in land cover classes during the study period, results showed that the land cover classes with major changes are the urban/built-up land and agricultural/grassland, with a steady increase in the former and steady decrease in the later. Results also show the highest rate of increase in urban land was between 2000 and 2010. In comparison to population, the both show increase over the study years but urban land shows a higher rate of increase indicating dispersion. To analyze urban growth pattern in the area, the study area was divided into three zones: NE, SE, and W. The SE zone showed the highest amount of the growth and from the results, the infill type of growth was inferred.

Analyzing growth and mortality in a subtropical urban forest ecosystem

Treesearch

Alicia B. Lawrence; Fancisco J. Escobedo; Christina L. Staudhammera; Wayne Zipperer Zipperer

2012-01-01

Information on urban tree growth, mortality and in-growth is currently being used to estimate urban forest structure changes and ecosystem services such as carbon sequestration. This study reports on tree diameter growth and mortality in 65 plots distributed among four land use categories, which were established in 2005/2006 in Gainesville, Florida, USA and were re-...

Crossing Boundaries: Collaborative Solutions to Urban Problems. Selected Proceedings of the National Conference on Urban Issues (1st, Buffalo, New York, November 11-13, 1994).

ERIC Educational Resources Information Center

Koritz, Douglas, Ed.; And Others

Selected papers are presented from a national conference on urban issues. They are: (1) "Collaboration as a Social Process: Inter-Institutional Cooperation and Educational Change" (Charles F. Underwood and Hardy T. Frye); (2) "Mobilizing the Village To Educate the Child" (Valerie Maholmes); (3) "Pathways to Teaching: An Urban Teacher Licensure…

Model analysis of urbanization impacts on boundary layer meteorology under hot weather conditions: a case study of Nanjing, China

NASA Astrophysics Data System (ADS)

Chen, Lei; Zhang, Meigen; Wang, Yongwei

2016-08-01

The Weather Research and Forecasting (WRF) model, configured with a single-layer urban canopy model, was employed to investigate the influence of urbanization on boundary layer meteorological parameters during a long-lasting heat wave. This study was conducted over Nanjing city, East China, from 26 July to 4 August 2010. The impacts of urban expansion and anthropogenic heat (AH) release were simulated to quantify their effects on 2-m temperature, 2-m water vapor mixing ratio, and 10-m wind speed and heat stress index. Urban sprawl increased the daily 2-m temperature in urbanized areas by around 1.6 °C and decreased the urban diurnal temperature range (DTR) by 1.24 °C. The contribution of AH release to the atmospheric warming was nearly 22 %, but AH had little influence on the DTR. The urban regional mean surface wind speed decreased by about 0.4 m s-1, and this decrease was successfully simulated from the surface to 300 m. The influence of urbanization on 2-m water vapor mixing ratio was significant over highly urbanized areas with a decrease of 1.1-1.8 g kg-1. With increased urbanization ratio, the duration of the inversion layer was about 4 h shorter, and the lower atmospheric layer was less stable. Urban heat island (UHI) intensity was significantly enhanced when synthesizing both urban sprawl and AH release and the daily mean UHI intensity increased by 0.74 °C. Urbanization increased the time under extreme heat stress (about 40 %) and worsened the living environment in urban areas.

Vegetation growth enhancement in urban environments of the Conterminous United States.

PubMed

Jia, Wenxiao; Zhao, Shuqing; Liu, Shuguang

2018-05-19

Cities are natural laboratories for studying vegetation responses to global environmental changes because of their climate, atmospheric, and biogeochemical conditions. However, few holistic studies have been conducted on the impact of urbanization on vegetation growth. We decomposed the overall impacts of urbanization on vegetation growth into direct (replacement of original land surfaces by impervious built-up) and indirect (urban environments) components, using a conceptual framework and remotely-sensed data for 377 metropolitan statistical areas (MSAs) in the conterminous United States (CONUS) in 2001, 2006, and 2011. Results showed that urban pixels are often greener than expected given the amount of paved surface they contain. The vegetation growth enhancement due to indirect effects occurred in 88.4%, 90.8% and 92.9% of urban bins in 2001, 2006 and 2011, respectively. By defining offset value as the ratio of the absolute indirect and direct impact, we obtained that growth enhancement due to indirect effects compensated for about 29.2%, 29.5% and 31.0% of the reduced productivity due to loss of vegetated surface area on average in 2001, 2006, and 2011, respectively. Vegetation growth responses to urbanization showed little temporal variation but large regional differences with higher offset value in the western CONUS than in the eastern CONUS. Our study highlights the prevalence of vegetation growth enhancement in urban environments and the necessity of differentiating various impacts of urbanization on vegetation growth, and calls for tailored field experiments to understand the relative contributions of various driving forces to vegetation growth and predict vegetation responses to future global change using cities as harbingers. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

A worldwide model for boundaries of urban settlements.

PubMed

Oliveira, Erneson A; Furtado, Vasco; Andrade, José S; Makse, Hernán A

2018-05-01

The shape of urban settlements plays a fundamental role in their sustainable planning. Properly defining the boundaries of cities is challenging and remains an open problem in the science of cities. Here, we propose a worldwide model to define urban settlements beyond their administrative boundaries through a bottom-up approach that takes into account geographical biases intrinsically associated with most societies around the world, and reflected in their different regional growing dynamics. The generality of the model allows one to study the scaling laws of cities at all geographical levels: countries, continents and the entire world. Our definition of cities is robust and holds to one of the most famous results in social sciences: Zipf's law. According to our results, the largest cities in the world are not in line with what was recently reported by the United Nations. For example, we find that the largest city in the world is an agglomeration of several small settlements close to each other, connecting three large settlements: Alexandria, Cairo and Luxor. Our definition of cities opens the doors to the study of the economy of cities in a systematic way independently of arbitrary definitions that employ administrative boundaries.

Scale effects in wind tunnel modeling of an urban atmospheric boundary layer

NASA Astrophysics Data System (ADS)

Kozmar, Hrvoje

2010-03-01

Precise urban atmospheric boundary layer (ABL) wind tunnel simulations are essential for a wide variety of atmospheric studies in built-up environments including wind loading of structures and air pollutant dispersion. One of key issues in addressing these problems is a proper choice of simulation length scale. In this study, an urban ABL was reproduced in a boundary layer wind tunnel at different scales to study possible scale effects. Two full-depth simulations and one part-depth simulation were carried out using castellated barrier wall, vortex generators, and a fetch of roughness elements. Redesigned “Counihan” vortex generators were employed in the part-depth ABL simulation. A hot-wire anemometry system was used to measure mean velocity and velocity fluctuations. Experimental results are presented as mean velocity, turbulence intensity, Reynolds stress, integral length scale of turbulence, and power spectral density of velocity fluctuations. Results suggest that variations in length-scale factor do not influence the generated ABL models when using similarity criteria applied in this study. Part-depth ABL simulation compares well with two full-depth ABL simulations indicating the truncated vortex generators developed for this study can be successfully employed in urban ABL part-depth simulations.

The Global Pattern of Urbanization and Economic Growth: Evidence from the Last Three Decades

PubMed Central

Chen, Mingxing; Zhang, Hua; Liu, Weidong; Zhang, Wenzhong

2014-01-01

The relationship between urbanization and economic growth has been perplexing. In this paper, we identify the pattern of global change and the correlation of urbanization and economic growth, using cross-sectional, panel estimation and geographic information systems (GIS) methods. The analysis has been carried out on a global geographical scale, while the timescale of the study spans the last 30 years. The data shows that urbanization levels have changed substantially during these three decades. Empirical findings from cross-sectional data and panel data support the general notion of close links between urbanization levels and GDP per capita. However, we also present significant evidence that there is no correlation between urbanization speed and economic growth rate at the global level. Hence, we conclude that a given country cannot obtain the expected economic benefits from accelerated urbanization, especially if it takes the form of government-led urbanization. In addition, only when all facets are taken into consideration can we fully assess the urbanization process. PMID:25099392

The global pattern of urbanization and economic growth: evidence from the last three decades.

PubMed

Chen, Mingxing; Zhang, Hua; Liu, Weidong; Zhang, Wenzhong

2014-01-01

The relationship between urbanization and economic growth has been perplexing. In this paper, we identify the pattern of global change and the correlation of urbanization and economic growth, using cross-sectional, panel estimation and geographic information systems (GIS) methods. The analysis has been carried out on a global geographical scale, while the timescale of the study spans the last 30 years. The data shows that urbanization levels have changed substantially during these three decades. Empirical findings from cross-sectional data and panel data support the general notion of close links between urbanization levels and GDP per capita. However, we also present significant evidence that there is no correlation between urbanization speed and economic growth rate at the global level. Hence, we conclude that a given country cannot obtain the expected economic benefits from accelerated urbanization, especially if it takes the form of government-led urbanization. In addition, only when all facets are taken into consideration can we fully assess the urbanization process.

Urban environment of New York City promotes growth in northern red oak seedlings.

PubMed

Searle, Stephanie Y; Turnbull, Matthew H; Boelman, Natalie T; Schuster, William S F; Yakir, Dan; Griffin, Kevin L

2012-04-01

Urbanization is accelerating across the globe, elevating the importance of studying urban ecology. Urban environments exhibit several factors affecting plant growth and function, including high temperatures (particularly at night), CO(2) concentrations and atmospheric nitrogen deposition. We investigated the effects of urban environments on growth in Quercus rubra L. seedlings. We grew seedlings from acorns for one season at four sites along an urban-rural transect from Central Park in New York City to the Catskill Mountains in upstate New York (difference in average maximum temperatures of 2.4 °C; difference in minimum temperatures of 4.6 °C). In addition, we grew Q. rubra seedlings in growth cabinets (GCs) mimicking the seasonal differential between the city and rural sites (based on a 5-year average). In the field experiment, we found an eightfold increase in biomass in urban-grown seedlings relative to those grown at rural sites. This difference was primarily related to changes in growth allocation. Urban-grown seedlings and seedlings grown at urban temperatures in the GCs exhibited a lower root: shoot ratio (urban ~0.8, rural/remote ~1.5), reducing below-ground carbon costs associated with construction and maintenance. These urban seedlings instead allocated more growth to leaves than did rural-grown seedlings, resulting in 10-fold greater photosynthetic area but no difference in photosynthetic capacity of foliage per unit area. Seedlings grown at urban temperatures in both the field and GC experiments had higher leaf nitrogen concentrations per unit area than those grown at cooler temperatures (increases of 23% in field, 32% in GC). Lastly, we measured threefold greater (13)C enrichment of respired CO(2) (relative to substrate) in urban-grown leaves than at other sites, which may suggest greater allocation of respiratory function to growth over maintenance. It also shows that lack of differences in total R flux in response to environmental conditions may mask dramatic shifts in respiratory functioning. Overall, our findings indicating greater seedling growth and establishment at a critical regeneration phase of forest development may have important implications for the ecology of urban forests as well as the predicted growth of the terrestrial biosphere in temperate regions in response to climate change.

Remote sensing based approach for monitoring urban growth in Mexico city, Mexico: A case study

NASA Astrophysics Data System (ADS)

Obade, Vincent

The world is experiencing a rapid rate of urban expansion, largely contributed by the population growth. Other factors supporting urban growth include the improved efficiency in the transportation sector and increasing dependence on cars as a means of transport. The problems attributed to the urban growth include: depletion of energy resources, water and air pollution; loss of landscapes and wildlife, loss of agricultural land, inadequate social security and lack of employment or underemployment. Aerial photography is one of the popular techniques for analyzing, planning and minimizing urbanization related problems. However, with the advances in space technology, satellite remote sensing is increasingly being utilized in the analysis and planning of the urban environment. This article outlines the strengths and limitations of potential remote sensing techniques for monitoring urban growth. The selected methods include: Principal component analysis, Maximum likelihood classification and "decision tree". The results indicate that the "classification tree" approach is the most promising for monitoring urban change, given the improved accuracy and smooth transition between the various land cover classes

Using GIS for Developing Sustainable Urban Growth Case Kyrenia Region

NASA Astrophysics Data System (ADS)

Kara, C.; Akçit, N.

2018-03-01

It is critical to develop urban layers for analysis sustainable urban development possibilities within planning process. Kyrenia Region has many physical, environmental or economic issues that may danger the growth possibilities in sustainable manner. From this point, this study uses different spatial layers such as slope, distance to roads, distance to central zone, vegetation, soil productivity, environmental protection zones, distance to open/green space, distance to education for supporting sustainable urban growth policies and define suitable areas for urban development within this perspective. The study tries to convert sustainable urban growth policies such as; compact growth, environmental protection, equal accessibility to basic services; into spatial layers and establish proper framework for multi criteria evaluation in Kyrenia Region within using geographical information systems. It shows suitability values for Kyrenia region and constraints zones at final section. It clearly presents the suitable areas for the sustainable urbanization and also unsuitable or risky areas for reducing the possible disasters and may happen in the future.

Modeling flow around bluff bodies and predicting urban dispersion using large eddy simulation.

PubMed

Tseng, Yu-Heng; Meneveau, Charles; Parlange, Marc B

2006-04-15

Modeling air pollutant transport and dispersion in urban environments is especially challenging due to complex ground topography. In this study, we describe a large eddy simulation (LES) tool including a new dynamic subgrid closure and boundary treatment to model urban dispersion problems. The numerical model is developed, validated, and extended to a realistic urban layout. In such applications fairly coarse grids must be used in which each building can be represented using relatively few grid-points only. By carrying out LES of flow around a square cylinder and of flow over surface-mounted cubes, the coarsest resolution required to resolve the bluff body's cross section while still producing meaningful results is established. Specifically, we perform grid refinement studies showing that at least 6-8 grid points across the bluff body are required for reasonable results. The performance of several subgrid models is also compared. Although effects of the subgrid models on the mean flow are found to be small, dynamic Lagrangian models give a physically more realistic subgrid-scale (SGS) viscosity field. When scale-dependence is taken into consideration, these models lead to more realistic resolved fluctuating velocities and spectra. These results set the minimum grid resolution and subgrid model requirements needed to apply LES in simulations of neutral atmospheric boundary layer flow and scalar transport over a realistic urban geometry. The results also illustrate the advantages of LES over traditional modeling approaches, particularly its ability to take into account the complex boundary details and the unsteady nature of atmospheric boundary layer flow. Thus LES can be used to evaluate probabilities of extreme events (such as probabilities of exceeding threshold pollutant concentrations). Some comments about computer resources required for LES are also included.

Dynamics of Urban Evolution : Volume 1. Inter-Urban Evolution.

DOT National Transportation Integrated Search

1978-10-01

The concept of "order by fluctuation," that has appeared recently in physico-chemical and biological systems, is applied to the description of urban growth. It is shown that fluctuations play a vital role in the evolutionary process of urban growth. ...

Urban change analysis and future growth of Istanbul.

PubMed

Akın, Anıl; Sunar, Filiz; Berberoğlu, Süha

2015-08-01

This study is aimed at analyzing urban change within Istanbul and assessing the city's future growth potential using appropriate approach modeling for the year 2040. Urban growth is a major driving force of land-use change, and spatial and temporal components of urbanization can be identified through accurate spatial modeling. In this context, widely used urban modeling approaches, such as the Markov chain and logistic regression based on cellular automata (CA), were used to simulate urban growth within Istanbul. The distance from each pixel to the urban and road classes, elevation, and slope, together with municipality and land use maps (as an excluded layer), were identified as factors. Calibration data were obtained from remotely sensed data recorded in 1972, 1986, and 2013. Validation was performed by overlaying the simulated and actual 2013 urban maps, and a kappa index of agreement was derived. The results indicate that urban expansion will influence mainly forest areas during the time period of 2013-2040. The urban expansion was predicted as 429 and 327 km(2) with the Markov chain and logistic regression models, respectively.

Mapping forest structure, species gradients and growth in an urban area using lidar and hyperspectral imagery

NASA Astrophysics Data System (ADS)

Gu, Huan

Urban forests play an important role in the urban ecosystem by providing a range of ecosystem services. Characterization of forest structure, species variation and growth in urban forests is critical for understanding the status, function and process of urban ecosystems, and helping maximize the benefits of urban ecosystems through management. The development of methods and applications to quantify urban forests using remote sensing data has lagged the study of natural forests due to the heterogeneity and complexity of urban ecosystems. In this dissertation, I quantify and map forest structure, species gradients and forest growth in an urban area using discrete-return lidar, airborne imaging spectroscopy and thermal infrared data. Specific objectives are: (1) to demonstrate the utility of leaf-off lidar originally collected for topographic mapping to characterize and map forest structure and associated uncertainties, including aboveground biomass, basal area, diameter, height and crown size; (2) to map species gradients using forest structural variables estimated from lidar and foliar functional traits, vegetation indices derived from AVIRIS hyperspectral imagery in conjunction with field-measured species data; and (3) to identify factors related to relative growth rates in aboveground biomass in the urban forests, and assess forest growth patterns across areas with varying degree of human interactions. The findings from this dissertation are: (1) leaf-off lidar originally acquired for topographic mapping provides a robust, potentially low-cost approach to quantify spatial patterns of forest structure and carbon stock in urban areas; (2) foliar functional traits and vegetation indices from hyperspectral data capture gradients of species distributions in the heterogeneous urban landscape; (3) species gradients, stand structure, foliar functional traits and temperature are strongly related to forest growth in the urban forests; and (4) high uncertainties in our ability to map forest structure, species gradient and growth rate occur in residential neighborhoods and along forest edges. Maps generated from this dissertation provide estimates of broad-scale spatial variations in forest structure, species distributions and growth to the city forest managers. The associated maps of uncertainty help managers understand the limitations of the maps and identify locations where the maps are more reliable and where more data are needed.

Pollutant Plume Dispersion in the Atmospheric Boundary Layer over Idealized Urban Roughness

NASA Astrophysics Data System (ADS)

Wong, Colman C. C.; Liu, Chun-Ho

2013-05-01

The Gaussian model of plume dispersion is commonly used for pollutant concentration estimates. However, its major parameters, dispersion coefficients, barely account for terrain configuration and surface roughness. Large-scale roughness elements (e.g. buildings in urban areas) can substantially modify the ground features together with the pollutant transport in the atmospheric boundary layer over urban roughness (also known as the urban boundary layer, UBL). This study is thus conceived to investigate how urban roughness affects the flow structure and vertical dispersion coefficient in the UBL. Large-eddy simulation (LES) is carried out to examine the plume dispersion from a ground-level pollutant (area) source over idealized street canyons for cross flows in neutral stratification. A range of building-height-to-street-width (aspect) ratios, covering the regimes of skimming flow, wake interference, and isolated roughness, is employed to control the surface roughness. Apart from the widely used aerodynamic resistance or roughness function, the friction factor is another suitable parameter that measures the drag imposed by urban roughness quantitatively. Previous results from laboratory experiments and mathematical modelling also support the aforementioned approach for both two- and three-dimensional roughness elements. Comparing the UBL plume behaviour, the LES results show that the pollutant dispersion strongly depends on the friction factor. Empirical studies reveal that the vertical dispersion coefficient increases with increasing friction factor in the skimming flow regime (lower resistance) but is more uniform in the regimes of wake interference and isolated roughness (higher resistance). Hence, it is proposed that the friction factor and flow regimes could be adopted concurrently for pollutant concentration estimate in the UBL over urban street canyons of different roughness.

Quality and sensitivity of high-resolution numerical simulation of urban heat islands

NASA Astrophysics Data System (ADS)

Li, Dan; Bou-Zeid, Elie

2014-05-01

High-resolution numerical simulations of the urban heat island (UHI) effect with the widely-used Weather Research and Forecasting (WRF) model are assessed. Both the sensitivity of the results to the simulation setup, and the quality of the simulated fields as representations of the real world, are investigated. Results indicate that the WRF-simulated surface temperatures are more sensitive to the planetary boundary layer (PBL) scheme choice during nighttime, and more sensitive to the surface thermal roughness length parameterization during daytime. The urban surface temperatures simulated by WRF are also highly sensitive to the urban canopy model (UCM) used. The implementation in this study of an improved UCM (the Princeton UCM or PUCM) that allows the simulation of heterogeneous urban facets and of key hydrological processes, together with the so-called CZ09 parameterization for the thermal roughness length, significantly reduce the bias (<1.5 °C) in the surface temperature fields as compared to satellite observations during daytime. The boundary layer potential temperature profiles are captured by WRF reasonable well at both urban and rural sites; the biases in these profiles relative to aircraft-mounted senor measurements are on the order of 1.5 °C. Changing UCMs and PBL schemes does not alter the performance of WRF in reproducing bulk boundary layer temperature profiles significantly. The results illustrate the wide range of urban environmental conditions that various configurations of WRF can produce, and the significant biases that should be assessed before inferences are made based on WRF outputs. The optimal set-up of WRF-PUCM developed in this paper also paves the way for a confident exploration of the city-scale impacts of UHI mitigation strategies in the companion paper (Li et al 2014).

[Employment and urban growth; an application of Czamanski's model to the Mexican case].

PubMed

Verduzco Chavez, B

1991-01-01

The author applies the 1964 model developed by Stanislaw Czamanski, based on theories of urban growth and industrial localization, to the analysis of urban growth in Mexico. "The advantages of this model in its application as a support instrument in the process of urban planning when the information available is incomplete are...discussed...." Census data for 44 cities in Mexico are used. (SUMMARY IN ENG) excerpt

Modeling the Urban Boundary and Canopy Layers

EPA Science Inventory

Today, we are confronted with increasingly more sophisticated application requirements for urban modeling. These include those that address emergency response to acute exposures from toxic releases, health exposure assessments from adverse air quality, energy usage, and character...

Evaluating WRF Simulations of Urban Boundary Layer Processes during DISCOVER-AQ

NASA Astrophysics Data System (ADS)

Hegarty, J. D.; Henderson, J.; Lewis, J. R.; McGrath-Spangler, E. L.; Scarino, A. J.; Ferrare, R. A.; DeCola, P.; Welton, E. J.

2015-12-01

The accurate representation of processes in the planetary boundary layer (PBL) in meteorological models is of prime importance to air quality and greenhouse gas simulations as it governs the depth to which surface emissions are vertically mixed and influences the efficiency by which they are transported downwind. In this work we evaluate high resolution (~1 km) WRF simulations of PBL processes in the Washington DC - Baltimore and Houston urban areas during the respective DISCOVER-AQ 2011 and 2013 field campaigns using MPLNET micro-pulse lidar (MPL), mini-MPL, airborne high spectral resolution lidar (HSRL), Doppler wind profiler and CALIPSO satellite measurements along with complimentary surface and aircraft measurements. We will discuss how well WRF simulates the spatiotemporal variability of the PBL height in the urban areas and the development of fine-scale meteorological features such as bay and sea breezes that influence the air quality of the urban areas studied.

The use of an image registration technique in the urban growth monitoring

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Foresti, C.; Deoliveira, M. D. L. N.; Niero, M.; Parreira, E. M. D. M. F.

1984-01-01

The use of an image registration program in the studies of urban growth is described. This program permits a quick identification of growing areas with the overlap of the same scene in different periods, and with the use of adequate filters. The city of Brasilia, Brazil, is selected for the test area. The dynamics of Brasilia urban growth are analyzed with the overlap of scenes dated June 1973, 1978 and 1983. The results showed the utilization of the image registration technique for the monitoring of dynamic urban growth.

Integration of Genetic Algorithms and Fuzzy Logic for Urban Growth Modeling

NASA Astrophysics Data System (ADS)

Foroutan, E.; Delavar, M. R.; Araabi, B. N.

2012-07-01

Urban growth phenomenon as a spatio-temporal continuous process is subject to spatial uncertainty. This inherent uncertainty cannot be fully addressed by the conventional methods based on the Boolean algebra. Fuzzy logic can be employed to overcome this limitation. Fuzzy logic preserves the continuity of dynamic urban growth spatially by choosing fuzzy membership functions, fuzzy rules and the fuzzification-defuzzification process. Fuzzy membership functions and fuzzy rule sets as the heart of fuzzy logic are rather subjective and dependent on the expert. However, due to lack of a definite method for determining the membership function parameters, certain optimization is needed to tune the parameters and improve the performance of the model. This paper integrates genetic algorithms and fuzzy logic as a genetic fuzzy system (GFS) for modeling dynamic urban growth. The proposed approach is applied for modeling urban growth in Tehran Metropolitan Area in Iran. Historical land use/cover data of Tehran Metropolitan Area extracted from the 1988 and 1999 Landsat ETM+ images are employed in order to simulate the urban growth. The extracted land use classes of the year 1988 include urban areas, street, vegetation areas, slope and elevation used as urban growth physical driving forces. Relative Operating Characteristic (ROC) curve as an fitness function has been used to evaluate the performance of the GFS algorithm. The optimum membership function parameter is applied for generating a suitability map for the urban growth. Comparing the suitability map and real land use map of 1999 gives the threshold value for the best suitability map which can simulate the land use map of 1999. The simulation outcomes in terms of kappa of 89.13% and overall map accuracy of 95.58% demonstrated the efficiency and reliability of the proposed model.

Mapping urban tourist experience zones in downtown Raleigh, North Carolina

Treesearch

Holly Bosley Perry

2012-01-01

Aspatial analysis of tourism resources in a community can reveal relationships among places of interest that may otherwise be obscured by predetermined geographic boundaries. As part of a larger study on the spatial characteristics of an urban tourist destination, data were collected from tourism and urban planning professionals regarding their perceptions of the most-...

Factors associated with physical growth of children during the first two years of life in rural and urban areas of Vietnam.

PubMed

Nguyen, Huong Thu; Eriksson, Bo; Petzold, Max; Bondjers, Göran; Tran, Toan Khanh; Nguyen, Liem Thanh; Ascher, Henry

2013-09-25

Differences between urban and rural settings can be seen as a very important example of gaps between groups in a population. The aim of this paper is to compare an urban and a rural area regarding child growth during the first two years of life as related to mother's use of antenatal care (ANC), breastfeeding and reported symptoms of illness. The studies were conducted in two Health and Demographic Surveillance Sites, one rural and one urban in Hanoi, Vietnam. We found that children in the urban area grow faster than those in the rural area. There were statistical associations between growth and the education of the mother as well as household resources. There were positive correlations between the number of ANC visits and child growth. We also saw a positive association between growth and early initiation (first hour of life) of breastfeeding but the reported duration of exclusive breastfeeding was not statistically significantly related to growth. Reporting symptoms of illness was negatively correlated to growth, i.e. morbidity is hampering growth. All predictors of growth discussed in this article, ANC, breastfeeding and illness, are associated with social and economic conditions. To improve and maintain good conditions for child growth it is important to strengthen education of mothers and household resources particularly in the rural areas. Globalization and urbanization means obvious risks for increasing gaps not least between urban and rural areas. Improvement of the quality of programs for antenatal care, breastfeeding and integrated management of childhood illness are also needed in Vietnam.

Grain boundary, triple junction and quadruple point mobility controlled normal grain growth

NASA Astrophysics Data System (ADS)

Rios, P. R.; Glicksman, M. E.

2015-07-01

Reduction in stored free energy provides the thermodynamic driving force for grain and bubble growth in polycrystals and foams. Evolution of polycrystalline networks exhibit the additional complication that grain growth may be controlled by several kinetic mechanisms through which the decrease in network energy occurs. Polyhedral boundaries, triple junctions (TJs), and quadruple points (QPs) are the geometrically distinct elements of three dimensional networks that follow Plateau's rules, provided that grain growth is limited by diffusion through, and motion of, cell boundaries. Shvindlerman and co-workers have long recognized the kinetic influences on polycrystalline grain growth of network TJs and QPs. Moreover, the emergence of interesting polycrystalline nanomaterials underscored that TJs can indeed influence grain growth kinetics. Currently there exist few detailed studies concerned either with network distributions of grain size, number of faces per grain, or with 'grain trajectories', when grain growth is limited by the motion of its TJs or QPs. By contrast there exist abundant studies of classical grain growth limited by boundary mobility. This study is focused on a topological/geometrical representation of polycrystals to obtain statistical predictions of the grain size and face number distributions, as well as growth 'trajectories' during steady-state grain growth. Three limits to grain growth are considered, with grain growth kinetics controlled by boundary, TJ, and QP mobilities.

Urban Growth Scenarios of a Future MEGA City: Case Study Ahmedabad

NASA Astrophysics Data System (ADS)

Lehner, A.; Kraus, V.; Steinnocher, K.

2016-06-01

The study of urban areas and their development focuses on cities, their physical and demographic expansion and the tensions and impacts that go along with urban growth. Especially in developing countries and emerging national economies like India, consistent and up to date information or other planning relevant data all too often is not available. With its Smart Cities Mission, the Indian government places great importance on the future developments of Indian urban areas and pays tribute to the large-scale rural to urban migration. The potentials of urban remote sensing and its contribution to urban planning are discussed and related to the Indian Smart Cities Mission. A case study is presented showing urban remote sensing based information products for the city of Ahmedabad. Resulting urban growth scenarios are presented, hotspots identified and future action alternatives proposed.

Comprehensive Evaluation of Urban Sprawl on Ecological Environment Using Multi-Source Data: a Case Study of Beijing

NASA Astrophysics Data System (ADS)

Wang, Hao; Ning, Xiaogang; Zhu, Weiwei; Li, Fei

2016-06-01

With urban population growing and urban sprawling, urban ecological environment problems appear. Study on spatiotemporal characteristics of urban sprawl and its impact on ecological environment is useful for ecological civilization construction. Although a lot of work has been conducted on urban sprawl and its impact on ecological environment, resolution of images to extract urban boundary was relatively coarse and most studies only focused on certain indicators of ecological environment, rather than comprehensive evaluation of urban ecological environmental impact. In this study, high-resolution remote sensing images of Beijing from aerial photography in 2002 and 2013 respectively are employed to extract urban boundary with manual interpretation. Fractional Vegetation Coverage (FVC), Water Density (WD), Impervious Surfaces Coverage (ISC), Net Primary Production (NPP), and Land Surface Temperature (LST) are adopted to represent ecological environment. The ecological environment indicators are measured with some general algorithms by combining Landsat images, GIS data and metrological data of 243 day, 2001 and 244 day, 2013. In order to evaluate the impact of urban sprawl on ecological environment, pseudo changes due to metrological variation and other noise in this time period are removed after images calibration. The impact of urban sprawl on ecological environment is evaluated at different scales of urban extent, Beijing ring road and watershed. Results show that Beijing had been undergoing a rapid urbanization from 2002 to 2013, with urban area increase from 600 square kilometres to 987 square kilometres. All ecological environment indicators except LST became terrible in urban sprawl region, with carbon reduction of approximate 40508 tons. The Beiyun River watershed of Beijing degraded seriously since ISC increased to 0.59. Gratifyingly, ecological environment indicators including NDVI, NPP, and LST inside of 4th Ring Road became well.

Assessing housing growth when census boundaries change

Treesearch

Alexandra D. Syphard; Susan I. Stewart; Jason McKeefry; Roger B. Hammer; Jeremy S. Fried; Sherry Holcomb; Volker C. Radeloff

2009-01-01

The US Census provides the primary source of spatially explicit social data, but changing block boundaries complicate analyses of housing growth over time. We compared procedures for reconciling housing density data between 1990 and 2000 census block boundaries in order to assess the sensitivity of analytical methods to estimates of housing growth in Oregon. Estimates...

On the role of grain boundary character distribution in grain growth of Al-Mg alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsumoto, K.; Shibayanagi, T.; Umakoshi, Y.

1997-02-01

Grain growth behavior of recrystallized Al-Mg alloys containing 0.3 and 2.7 mass% Mg was investigated, focusing on the interconnection between development of the texture and grain boundary character distribution. An Al-0.3 mass% Mg alloy showed two stages in the change of microstructure during grain growth: the frequency of cube oriented grains and the {Sigma}1 boundary significantly increased at an early stage and then decreased. In the second stage a small amount of isolated large grains with the non-cube component grew and consumed the surrounding cube grains. In contrast, the frequency of cube oriented grains and the grain boundary character distributionmore » showed no significant change during grain growth of Al-2.7 mass% Mg. Small clusters composed of several cube grains containing {Sigma}1 boundaries were formed and their spatial distribution played an important role in the change of microstructure during grain growth. The effect of the spatial distribution on the grain growth behavior was discussed considering the energy balance at triple junctions of grain boundaries.« less

The Changing Face of the of Former Soviet Cities: Elucidated by Remote Sensing and Machine Learning Techniques

NASA Astrophysics Data System (ADS)

Poghosyan, Armen

2017-04-01

Despite remote sensing of urbanization emerged as a powerful tool to acquire critical knowledge about urban growth and its effects on global environmental change, human-environment interface as well as environmentally sustainable urban development, there is lack of studies utilizing remote sensing techniques to investigate urbanization trends in the Post-Soviet states. The unique challenges accompanying the urbanization in the Post-Soviet republics combined with the expected robust urban growth in developing countries over the next several decades highlight the critical need for a quantitative assessment of the urban dynamics in the former Soviet states as they navigate towards a free market democracy. This study uses total of 32 Level-1 precision terrain corrected (L1T) Landsat scenes with 30-m resolution as well as further auxiliary population and economic data for ten cities distributed in nine former Soviet republics to quantify the urbanization patterns in the Post-Soviet region. Land cover in each urban center of this study was classified by using Support Vector Machine (SVM) learning algorithm with overall accuracies ranging from 87 % to 97 % for 29 classification maps over three time steps during the past twenty-five years in order to estimate quantities, trends and drivers of urban growth in the study area. The results demonstrated several spatial and temporal urbanization patterns observed across the Post-Soviet states and based on urban expansion rates the cities can be divided into two groups, fast growing and slow growing urban centers. The relatively fast-growing urban centers have an average urban expansion rate of about 2.8 % per year, whereas the slow growing cities have an average urban expansion rate of about 1.0 % per year. The total area of new land converted to urban environment ranged from as low as 26 km2 to as high as 780 km2 for the ten cities over the 1990 - 2015 period, while the overall urban land increase ranged from 11.3 % to 96.6 % over the study period. Thus, after some initial developments following the breakup of the Soviet Union the growth rate in the urban core decreased gradually constrained by the availability of suitable land, while the urban expansion rates in the outer peripheral region were characterized with a robust urban growth rates across the study area. The rapid urban expansion observed in the former Soviet cities impairs environmentally sustainable characteristics such as compactness, better integrated land uses with abundant parks and greenbelts, low social polarization, as well as reliable public transit systems in some urban centers after the disintegration of the Soviet Union. The urban expansion rates considerably outpaced the urban population growth rates in all ten cities during the last quarter of a century, thus indicating that the urban growth is becoming more expansive with all cities experiencing significant decreases in overall urban population densities.

Parameterizing Urban Canopy Layer transport in an Lagrangian Particle Dispersion Model

NASA Astrophysics Data System (ADS)

Stöckl, Stefan; Rotach, Mathias W.

2016-04-01

The percentage of people living in urban areas is rising worldwide, crossed 50% in 2007 and is even higher in developed countries. High population density and numerous sources of air pollution in close proximity can lead to health issues. Therefore it is important to understand the nature of urban pollutant dispersion. In the last decades this field has experienced considerable progress, however the influence of large roughness elements is complex and has as of yet not been completely described. Hence, this work studied urban particle dispersion close to source and ground. It used an existing, steady state, three-dimensional Lagrangian particle dispersion model, which includes Roughness Sublayer parameterizations of turbulence and flow. The model is valid for convective and neutral to stable conditions and uses the kernel method for concentration calculation. As most Lagrangian models, its lower boundary is the zero-plane displacement, which means that roughly the lower two-thirds of the mean building height are not included in the model. This missing layer roughly coincides with the Urban Canopy Layer. An earlier work "traps" particles hitting the lower model boundary for a recirculation period, which is calculated under the assumption of a vortex in skimming flow, before "releasing" them again. The authors hypothesize that improving the lower boundary condition by including Urban Canopy Layer transport could improve model predictions. This was tested herein by not only trapping the particles, but also advecting them with a mean, parameterized flow in the Urban Canopy Layer. Now the model calculates the trapping period based on either recirculation due to vortex motion in skimming flow regimes or vertical velocity if no vortex forms, depending on incidence angle of the wind on a randomly chosen street canyon. The influence of this modification, as well as the model's sensitivity to parameterization constants, was investigated. To reach this goal, the model was initialized and compared with meteorological and SF6 tracer measurements from the Basel UrBan Boundary Layer Experiment (BUBBLE). The proposed modification does not improve the model's agreement with concentration observations, even though the trapping time shows promising agreement with measurements. Additionally, the modification's influence is smaller than those of different turbulence profiles, zero-plane displacement height and Roughness Sublayer height.

Modeling the dynamics of urban growth using multinomial logistic regression: a case study of Jiayu County, Hubei Province, China

NASA Astrophysics Data System (ADS)

Nong, Yu; Du, Qingyun; Wang, Kun; Miao, Lei; Zhang, Weiwei

2008-10-01

Urban growth modeling, one of the most important aspects of land use and land cover change study, has attracted substantial attention because it helps to comprehend the mechanisms of land use change thus helps relevant policies made. This study applied multinomial logistic regression to model urban growth in the Jiayu county of Hubei province, China to discover the relationship between urban growth and the driving forces of which biophysical and social-economic factors are selected as independent variables. This type of regression is similar to binary logistic regression, but it is more general because the dependent variable is not restricted to two categories, as those previous studies did. The multinomial one can simulate the process of multiple land use competition between urban land, bare land, cultivated land and orchard land. Taking the land use type of Urban as reference category, parameters could be estimated with odds ratio. A probability map is generated from the model to predict where urban growth will occur as a result of the computation.

CHIPS: A New Way to Monitor Colonias Along the United States-Mexico Border

USGS Publications Warehouse

Parcher, Jean W.; Humberson, Delbert G.

2007-01-01

Colonias, which are unincorporated border settlements in the United States, have emerged in rural areas without the governance and services normally provided by local government. Colonia residents live in poverty and lack adequate health care, potable water, and sanitation systems. These conditions create substantial health risks for colonias and surrounding communities. By 2001, more than 1,400 colonias were identified in Texas. Cooperation with the U.S. Department of Housing and Urban Development, Offices of the Texas Attorney General, Secretary of State, and the Texas Water Development Board has allowed the U.S. Geological Survey (USGS) to improve colonia Geographic Information System (GIS) boundaries and develop the Colonia Health, Infrastructure, and Platting Status tool (CHIPS). Together, the GIS boundaries and CHIPS aid the Texas government in prioritizing the limited funds that are available for infrastructure improvement. CHIPS's report generator can be tailored to the needs of the user, providing either broad or specific output. For example, a congressman could use CHIPS to list colonias with wastewater issues in a specific county, whereas a health researcher could list all colonias without clinical access. To help cities along the United States-Mexico border manage issues related to colonias growth, CHIPS will become publicly available in an Internet-enabled GIS as part of a cooperative study between the USGS, the U.S. Department of Housing and Urban Development, and the Mexican Instituto Nacional de Estadistica Geografia e Informatica.

Phase-field model with plastic flow for grain growth in nanocrystalline material

NASA Astrophysics Data System (ADS)

Steinbach, Ingo; Song, Xiaoyan; Hartmaier, Alexander

2010-01-01

A phase-field model is presented which considers the accumulation of structural defects in grain boundaries by an isotropic eigenstrain associated with the grain boundaries. It is demonstrated that the elastic energy caused by dilatation of the grain boundary with respect to the bulk crystal contributes largely to the grain boundary energy. The sign of this contribution can be both positive and negative dependent on the local stress state in the grain boundary. Self-diffusion of atoms is taken into account to relax the stress caused by the dilatation of the grain boundary. Application of the model to discontinuous grain growth in pure nanocrystalline cobalt material is presented. Linear grain growth is found in the nanocrystalline state, which is explained by the interpretation of grain boundary motion as a diffusive process defining an upper limit of the grain boundary velocity independent of the grain boundary curvature but dependent on temperature. The transition to regular grain growth at a critical temperature, as observed experimentally, is explained by the drop of theoretical grain boundary velocity due to its mean curvature during coarsening of the nanograin structure below the maximum velocity.

An allometric scaling relation based on logistic growth of cities

NASA Astrophysics Data System (ADS)

Chen, Yanguang

2014-08-01

The relationships between urban area and population size have been empirically demonstrated to follow the scaling law of allometric growth. This allometric scaling is based on exponential growth of city size and can be termed "exponential allometry", which is associated with the concepts of fractals. However, both city population and urban area comply with the course of logistic growth rather than exponential growth. In this paper, I will present a new allometric scaling based on logistic growth to solve the abovementioned problem. The logistic growth is a process of replacement dynamics. Defining a pair of replacement quotients as new measurements, which are functions of urban area and population, we can derive an allometric scaling relation from the logistic processes of urban growth, which can be termed "logistic allometry". The exponential allometric relation between urban area and population is the approximate expression of the logistic allometric equation when the city size is not large enough. The proper range of the allometric scaling exponent value is reconsidered through the logistic process. Then, a medium-sized city of Henan Province, China, is employed as an example to validate the new allometric relation. The logistic allometry is helpful for further understanding the fractal property and self-organized process of urban evolution in the right perspective.

Assessing the impact of transitions from centralised to decentralised water solutions on existing infrastructures – Integrated city-scale analysis with VIBe

PubMed Central

Sitzenfrei, Robert; Möderl, Michael; Rauch, Wolfgang

2013-01-01

Traditional urban water management relies on central organised infrastructure, the most important being the drainage network and the water distribution network. To meet upcoming challenges such as climate change, the rapid growth and shrinking of cities and water scarcity, water infrastructure needs to be more flexible, adaptable and sustainable (e.g., sustainable urban drainage systems, SUDS; water sensitive urban design, WSUD; low impact development, LID; best management practice, BMP). The common feature of all solutions is the push from a central solution to a decentralised solution in urban water management. This approach opens up a variety of technical and socio-economic issues, but until now, a comprehensive assessment of the impact has not been made. This absence is most likely attributable to the lack of case studies, and the availability of adequate models is usually limited because of the time- and cost-intensive preparation phase. Thus, the results of the analysis are based on a few cases and can hardly be transferred to other boundary conditions. VIBe (Virtual Infrastructure Benchmarking) is a tool for the stochastic generation of urban water systems at the city scale for case study research. With the generated data sets, an integrated city-scale analysis can be performed. With this approach, we are able to draw conclusions regarding the technical effect of the transition from existing central to decentralised urban water systems. In addition, it is shown how virtual data sets can assist with the model building process. A simple model to predict the shear stress performance due to changes in dry weather flow production is developed and tested. PMID:24210508

Variability in urban soils influences the health and growth of native tree seedlings

Treesearch

Clara C. Pregitzer; Nancy F. Sonti; Richard A. Hallett

2016-01-01

Reforesting degraded urban landscapes is important due to the many benefits urban forests provide. Urban soils are highly variable, yet little is known about how this variability in urban soils influences tree seedling performance and survival. We conducted a greenhouse study to assess health, growth, and survival of four native tree species growing in native glacial...

Bayesian methods to estimate urban growth potential

USGS Publications Warehouse

Smith, Jordan W.; Smart, Lindsey S.; Dorning, Monica; Dupéy, Lauren Nicole; Méley, Andréanne; Meentemeyer, Ross K.

2017-01-01

Urban growth often influences the production of ecosystem services. The impacts of urbanization on landscapes can subsequently affect landowners’ perceptions, values and decisions regarding their land. Within land-use and land-change research, very few models of dynamic landscape-scale processes like urbanization incorporate empirically-grounded landowner decision-making processes. Very little attention has focused on the heterogeneous decision-making processes that aggregate to influence broader-scale patterns of urbanization. We examine the land-use tradeoffs faced by individual landowners in one of the United States’ most rapidly urbanizing regions − the urban area surrounding Charlotte, North Carolina. We focus on the land-use decisions of non-industrial private forest owners located across the region’s development gradient. A discrete choice experiment is used to determine the critical factors influencing individual forest owners’ intent to sell their undeveloped properties across a series of experimentally varied scenarios of urban growth. Data are analyzed using a hierarchical Bayesian approach. The estimates derived from the survey data are used to modify a spatially-explicit trend-based urban development potential model, derived from remotely-sensed imagery and observed changes in the region’s socioeconomic and infrastructural characteristics between 2000 and 2011. This modeling approach combines the theoretical underpinnings of behavioral economics with spatiotemporal data describing a region’s historical development patterns. By integrating empirical social preference data into spatially-explicit urban growth models, we begin to more realistically capture processes as well as patterns that drive the location, magnitude and rates of urban growth.

Some structural aspects of urbanization in Ethiopia.

PubMed

Rafiq, M; Hailemariam, A

1987-07-01

This article studies the emerging patterns of urbanization in Ethiopia. Over the period from 1967-1984, a number of structural changes have occurred which are likely to play a dominant role in the future urban growth in Ethiopia. In spite of its long history of settled population, Ethiopia did not witness sustained growth of urban centers. Ethiopia is 1 of the least urbanized areas in the Third World. A 3rd aspect of urbanization in Ethiopia is the wide range of regional differentials in the level of urbanization. Most of the urban population is concentrated in 2 administrative regions--Shoa and Eritrea. A more balanced urban growth may, inter alia, involve a better spread in terms of higher education, industrialization, provision of health and social services, and the development of communication and commercial infrastructure. Another striking feature of urbanization in Ethiopia is that growth has not been disproportionately concentrated in the largest urban centers. The largest urban centers have not assumed an inordinately higher level of primacy. The basic form of the curve depicting the relationship between the size of a locality and its rank has remained unchanged over the period. The post-revolution land reforms and the new socioeconomic structure emerging from reorganization of the society appear to have a rural-urban migration inhibiting effect. Some of the country's regional differentials may be associated with environmental factors.

Monitoring urbanization and its implications in a mega city from space: spatiotemporal patterns and its indicators.

PubMed

Ramachandra, T V; Bharath, A H; Sowmyashree, M V

2015-01-15

Rapid and invasive urbanization has been associated with depletion of natural resources (vegetation and water resources), which in turn deteriorates the landscape structure and conditions in the local environment. Rapid increase in population due to the migration from rural areas is one of the critical issues of the urban growth. Urbanisation in India is drastically changing the land cover and often resulting in the sprawl. The sprawl regions often lack basic amenities such as treated water supply, sanitation, etc. This necessitates regular monitoring and understanding of the rate of urban development in order to ensure the sustenance of natural resources .Urban sprawl is the extent of urbanization which leads to the development of urban forms with the destruction of ecology and natural landforms. The rate of change of land use and extent of urban sprawl can be efficiently visualized and modelled with the help of geoinformatics. The knowledge of urban area, especially the growth magnitude, shape geometry, and spatial pattern is essential to understand the growth and characteristics of urbanization process. Urban pattern, shape and growth can be quantified using spatial metrics. This communication quantifies the urbanisation and associated growth pattern in Delhi. Spatial data of four decades were analysed to understand land over and land use dynamics. Further the region was divided into 4 zones and into circles of 1 km incrementing radius to understand and quantify the local spatial changes. Results of the landscape metrics indicate that the urban center was highly aggregated and the outskirts and the buffer regions were in the verge of aggregating urban patches. Shannon's Entropy index clearly depicted the outgrowth of sprawl areas in different zones of Delhi. Copyright © 2014 Elsevier Ltd. All rights reserved.

Impact of future urban growth on regional climate changes in the Seoul Metropolitan Area, Korea.

PubMed

Kim, Hyunsu; Kim, Yoo-Keun; Song, Sang-Keun; Lee, Hwa Woon

2016-11-15

The influence of changes in future urban growth (e.g., land use changes) on the future climate variability in the Seoul metropolitan area (SMA), Korea was evaluated using the WRF model and an urban growth model (SLEUTH). The land use changes in the study area were simulated using the SLEUTH model under three different urban growth scenarios: (1) current development trends scenario (SC 1), (2) managed development scenario (SC 2) and (3) ecological development scenario (SC 3). The maximum difference in the ratio of urban growth between SC 1 and SC 3 (SC 1 - SC 3) for 50years (2000-2050) was approximately 6.72%, leading to the largest differences (0.01°C and 0.03ms(-1), respectively) in the mean air temperature at 2m (T2) and wind speed at 10m (WS10). From WRF-SLEUTH modeling, the effects of future urban growth (or future land use changes) in the SMA are expected to result in increases in the spatial mean T2 and WS10 of up to 1.15°C and 0.03ms(-1), respectively, possibly due to thermal circulation caused by the thermal differences between urban and rural regions. Copyright © 2016 Elsevier B.V. All rights reserved.

Development of concepts for the management of thermal resources in urban areas - Assessment of transferability from the Basel (Switzerland) and Zaragoza (Spain) case studies

NASA Astrophysics Data System (ADS)

Epting, Jannis; García-Gil, Alejandro; Huggenberger, Peter; Vázquez-Suñe, Enric; Mueller, Matthias H.

2017-05-01

The shallow subsurface in urban areas is increasingly used by shallow geothermal energy systems as a renewable energy resource and as a cheap cooling medium, e.g. for building air conditioning. In combination with further anthropogenic activities, this results in altered thermal regimes in the subsurface and the so-called subsurface urban heat island effect. Successful thermal management of urban groundwater resources requires understanding the relative contributions of the different thermal parameters and boundary conditions that result in the "present thermal state" of individual urban groundwater bodies. To evaluate the "present thermal state" of urban groundwater bodies, good quality data are required to characterize the hydraulic and thermal aquifer parameters. This process also involved adequate monitoring systems which provide consistent subsurface temperature measurements and are the basis for parameterizing numerical heat-transport models. This study is based on previous work already published for two urban groundwater bodies in Basel (CH) and Zaragoza (ES), where comprehensive monitoring networks (hydraulics and temperature) as well as calibrated high-resolution numerical flow- and heat-transport models have been analyzed. The "present thermal state" and how it developed according to the different hydraulic and thermal boundary conditions is compared to a "potential natural state" in order to assess the anthropogenic thermal changes that have already occurred in the urban groundwater bodies we investigated. This comparison allows us to describe the various processes concerning groundwater flow and thermal regimes for the different urban settings. Furthermore, the results facilitate defining goals for specific aquifer regions, including future aquifer use and urbanization, as well as evaluating the thermal use potential for these regions. As one example for a more sustainable thermal use of subsurface water resources, we introduce the thermal management concept of the "relaxation factor", which is a first approach to overcome the present policy of "first come, first served". Remediation measures to regenerate overheated urban aquifers are also introduced. The transferability of the applied methods to other urban areas is discussed. It is shown that an appropriate selection of locations for monitoring hydraulic and thermal boundary conditions make it possible to implement representative interpretations of groundwater flow and thermal regimes as well as to set up high-resolution numerical flow- and heat-transport models. Those models are the basis for the sustainable management of thermal resources.

Modeling of urban growth using cellular automata (CA) optimized by Particle Swarm Optimization (PSO)

NASA Astrophysics Data System (ADS)

Khalilnia, M. H.; Ghaemirad, T.; Abbaspour, R. A.

2013-09-01

In this paper, two satellite images of Tehran, the capital city of Iran, which were taken by TM and ETM+ for years 1988 and 2010 are used as the base information layers to study the changes in urban patterns of this metropolis. The patterns of urban growth for the city of Tehran are extracted in a period of twelve years using cellular automata setting the logistic regression functions as transition functions. Furthermore, the weighting coefficients of parameters affecting the urban growth, i.e. distance from urban centers, distance from rural centers, distance from agricultural centers, and neighborhood effects were selected using PSO. In order to evaluate the results of the prediction, the percent correct match index is calculated. According to the results, by combining optimization techniques with cellular automata model, the urban growth patterns can be predicted with accuracy up to 75 %.

Conservation in metropolitan regions: assessing trends and threats of urban development and climate change

NASA Astrophysics Data System (ADS)

Thorne, J. H.; Santos, M. J.; Bjorkman, J.

2011-12-01

Two global challenges to successful conservation are urban expansion and climate change. Rapid urban growth threatens biodiversity and associated ecosystem services, while climate change may make currently protected areas unsuitable for species that exist within them. We examined three measures of landscape change for 8800 km2 of the San Francisco Bay metropolitan region over 80 years past and future: urban growth, protected area establishment, and natural vegetation type extents. The Bay Area is a good test bed for conservation assessment of the impacts of temporal and spatial of urban growth and land cover change. The region is geographically rather small, with over 40% of its lands already dedicated to protected park and open space lands, they are well-documented, and, the area has had extensive population growth in the past and is projected to continue to grow. The ten-county region within which our study area is a subset has grown from 1.78 million people in 1930, to 6.97 million in 2000 and is estimated to grow to 10.94 million by 2050. With such an influx of people into a small geographic area, it is imperative to both examine the past urban expansion and estimate how the future population will be accommodated into the landscape. We quantify these trends to assess conservation 'success' through time. We used historical and current landcover maps to assess trend, and a GIS-based urban modeling (UPlan) to assess future urban growth impacts in the region, under three policy scenarios- business as usual, smart growth, and urban redevelopment. Impacts are measured by the amount of open space targeted by conservation planners in the region that will be urbanized under each urban growth policy. Impacts are also measured by estimates of the energy consumption projected for each of the scenarios on household and business unit level. The 'business as usual' and 'smart growth' scenarios differed little in their impacts to targeted conservation lands, because so little open space remains to accommodate the expected population growth. Redevelopment conserved more naturally vegetated open space. The redevelopment scenario also permits the lowest increase in energy demand because buildings taken out in the process are reconfigured to higher levels of energy efficiency. However, redevelopment requires substantial increases in residential densities to confine the spatial footprint of the expected future urban growth. These three urban growth scenario footprints differ in their impact to natural vegetation and open space. To incorporate the influence of climate change on remaining natural ecosystems in this urbanizing landscape, we projected the stability of existing, mapped, vegetation types in the region under future climates by examining where projected ranges of the dominant plant species comprising each California Wildlife Habitat Relationship type will all remain together, and where they will begin to dis-associate due to biogeographic response to changing climate. This permits identification of stable and unstable zones of vegetation. The combination of climate stable, high conservation priority and likelihood of urban development provides a way to prioritize conservation land acquisitions.

24 CFR 598.105 - Data used for eligibility determinations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... determinations. 598.105 Section 598.105 Housing and Urban Development Regulations Relating to Housing and Urban... DESIGNATIONS Eligibility Requirements § 598.105 Data used for eligibility determinations. (a) Source of data... the boundaries of census tracts, as defined in § 598.3. ...

24 CFR 598.105 - Data used for eligibility determinations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... determinations. 598.105 Section 598.105 Housing and Urban Development Regulations Relating to Housing and Urban... DESIGNATIONS Eligibility Requirements § 598.105 Data used for eligibility determinations. (a) Source of data... the boundaries of census tracts, as defined in § 598.3. ...

24 CFR 598.105 - Data used for eligibility determinations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... determinations. 598.105 Section 598.105 Housing and Urban Development Regulations Relating to Housing and Urban... DESIGNATIONS Eligibility Requirements § 598.105 Data used for eligibility determinations. (a) Source of data... the boundaries of census tracts, as defined in § 598.3. ...

A FEDERATED PARTNERSHIP FOR URBAN METEOROLOGICAL AND AIR QUALITY MODELING

EPA Science Inventory

Recently, applications of urban meteorological and air quality models have been performed at resolutions on the order of km grid sizes. This necessitated development and incorporation of high resolution landcover data and additional boundary layer parameters that serve to descri...

Maximizing oyster-reef growth supports green infrastructure with accelerating sea-level rise.

PubMed

Ridge, Justin T; Rodriguez, Antonio B; Joel Fodrie, F; Lindquist, Niels L; Brodeur, Michelle C; Coleman, Sara E; Grabowski, Jonathan H; Theuerkauf, Ethan J

2015-10-07

Within intertidal communities, aerial exposure (emergence during the tidal cycle) generates strong vertical zonation patterns with distinct growth boundaries regulated by physiological and external stressors. Forecasted accelerations in sea-level rise (SLR) will shift the position of these critical boundaries in ways we cannot yet fully predict, but landward migration will be impaired by coastal development, amplifying the importance of foundation species' ability to maintain their position relative to rising sea levels via vertical growth. Here we show the effects of emergence on vertical oyster-reef growth by determining the conditions at which intertidal reefs thrive and the sharp boundaries where reefs fail, which shift with changes in sea level. We found that oyster reef growth is unimodal relative to emergence, with greatest growth rates occurring between 20-40% exposure, and zero-growth boundaries at 10% and 55% exposures. Notably, along the lower growth boundary (10%), increased rates of SLR would outpace reef accretion, thereby reducing the depth range of substrate suitable for reef maintenance and formation, and exacerbating habitat loss along developed shorelines. Our results identify where, within intertidal areas, constructed or natural oyster reefs will persist and function best as green infrastructure to enhance coastal resiliency under conditions of accelerating SLR.

"A minimum of urbanism and a maximum of ruralism": the Cuban experience.

PubMed

Gugler, J

1980-01-01

The case of Cuba provides social scientists with reasonably good information on urbanization policies and their implementation in 1 developing country committed to socialism. The demographic context is considered, and Cuban efforts to eliminate the rural-urban contradiction and to redefine the role of Havana are described. The impact of these policies is analyzed in terms of available data on urbanization patterns since January 1959 when the revolutionaries marched into Havana. Prerevolutionary urbanization trends are considered. Fertility in Cuba has declined simultaneously with mortality and even more rapidly. Projections assume a 1.85% annual growth rate, resulting in a population of nearly 15 million by the year 2000. Any estimate regarding the future trend in population growth must depend on prognosis of general living conditions and of specific government policies regarding contraception, abortion, female labor force participation, and child care facilities. If population growth in Cuba has been substantial, but less dramatic than that of many other developing countries, urban growth presents a similar picture. Cuba's highest rate of growth of the population living in urban centers with a population over 20,000, in any intercensal period during the 20th century, was 4.1%/year for 1943-1953. It dropped to 3.0% in the 1953-1970 period. Government policies achieved a measure of success in stemming the tide of rural-urban migration, but the aims of the revolutionary leadership went further. The objective was for urban dwellers to be involved in agriculture, and the living standards of the rural population were to be raised to approximate those of city dwellers. The goal of "urbanizing" the countryside found expression in a program designed to construct new small towns which could more easily be provided with services. A slowdown in the growth of Havana, and the concomitant weakening of its dominant position, was intended by the revolutionary leadership. Offical policies have been enunciated that connect the reduction in the dominance of Havana with the slowdown in urban growth and the urbanization of the countryside. Evidence is presented which suggests achievements along all of these dimensions, but by 1970 they were, as yet, quite limited.

Forecasting urban growth across the United States-Mexico border

USGS Publications Warehouse

Norman, L.M.; Feller, M.; Phillip, Guertin D.

2009-01-01

The sister-city area of Nogales, Arizona, and Nogales, Sonora, Mexico, is known collectively as Ambos (both) Nogales. This area was historically one city and was administratively divided by the Gadsden Purchase in 1853. These arid-lands have limited and sensitive natural resources. Environmental planning can support sustainable development to accommodate the predicted influx of population. The objective of this research is to quantify the amount of predicted urban growth for the Ambos Nogales watershed to support future planning for sustainable development. Two modeling regimes are explored. Our goal is to identify possible growth patterns associated with the twin-city area as a whole and with the two cities modeled as separate entities. We analyzed the cross-border watershed using regression analysis from satellite images from 1975, 1983, 1996, and 2002 and created urban area classifications. We used these classifications as input to the urban growth model, SLEUTH, to simulate likely patterns of development and define projected conversion probabilities. Model results indicate that the two cities are undergoing very different patterns of change and identify locations of expected growth based on historical development. Growth in Nogales, Arizona is stagnant while the urban area in Nogales, Sonora is exploding. This paper demonstrates an application that portrays how future binational urban growth could develop and affect the environment. This research also provides locations of potential growth for use in city planning.

Gifted and at Risk: A Cross-District Comparison of Gifted Student Growth and Solutions for Urban Schools

ERIC Educational Resources Information Center

Kurt, Layla J.; Chenault, Krystel H.

2017-01-01

In this study, the researchers highlight differences in district level value-added growth data of gifted students in urban and suburban districts, as categorized by the Ohio Department of Education. In addition to analyzing the difference between the academic growth of urban and suburban gifted students, the researchers sought to synthesize…

Transition index maps for urban growth simulation: application of artificial neural networks, weight of evidence and fuzzy multi-criteria evaluation.

PubMed

Shafizadeh-Moghadam, Hossein; Tayyebi, Amin; Helbich, Marco

2017-06-01

Transition index maps (TIMs) are key products in urban growth simulation models. However, their operationalization is still conflicting. Our aim was to compare the prediction accuracy of three TIM-based spatially explicit land cover change (LCC) models in the mega city of Mumbai, India. These LCC models include two data-driven approaches, namely artificial neural networks (ANNs) and weight of evidence (WOE), and one knowledge-based approach which integrates an analytical hierarchical process with fuzzy membership functions (FAHP). Using the relative operating characteristics (ROC), the performance of these three LCC models were evaluated. The results showed 85%, 75%, and 73% accuracy for the ANN, FAHP, and WOE. The ANN was clearly superior compared to the other LCC models when simulating urban growth for the year 2010; hence, ANN was used to predict urban growth for 2020 and 2030. Projected urban growth maps were assessed using statistical measures, including figure of merit, average spatial distance deviation, producer accuracy, and overall accuracy. Based on our findings, we recomend ANNs as an and accurate method for simulating future patterns of urban growth.

Introduction: population migration and urbanization in developing countries.

PubMed

Kojima, R

1996-12-01

This introductory article discusses the correlation between migration and rapid urbanization and growth in the largest cities of the developing world. The topics include the characteristics of urbanization, government policies toward population migration, the change in absolute size of the rural population, and the problems of maintaining megacities. Other articles in this special issue are devoted to urbanization patterns in China, South Africa, Iran, Korea and Taiwan as newly industrialized economies (NIEs), informal sectors in the Philippines and Thailand, and low-income settlements in Bogota, Colombia, and India. It is argued that increased urbanization is produced by natural population growth, the expansion of the urban administrative area, and the in-migration from rural areas. A comparison of urbanization rates of countries by per capita gross national product (GNP) reveals that countries with per capita GNP of under US$2000 have urbanization rates of 10-60%. Rates are under 30% in Africa, the Middle East, South Asia, China, and Indonesia. Rapid urbanization appears to follow the economic growth curve. The rate of urbanization in Latin America is high enough to be comparable to urbanization in Europe and the US. Taiwan and Korea have high rates of urbanization that surpass the rate of industrialization. Thailand and Malaysia have low rates of urbanization compared to the size of their per capita GNP. Urbanization rates under 20% occur in countries without economic development. Rates between 20% and 50% occur in countries with or without industrialization. East Asian urbanization is progressing along with industrialization. Africa and the Middle East have urbanization without industrialization. In 1990 there were 20 developing countries and 5 developed countries with populations over 5 million. In 10 of 87 developing countries rural population declined in absolute size. The author identifies and discusses four patterns of urban growth.

Aircraft observations of the urban CO2 dome in London and calculated daytime CO2 fluxes at the urban-regional scale

NASA Astrophysics Data System (ADS)

Font, Anna; Morgui, Josep Anton; Grimmond, Sue; Barratt, Benjamin

2013-04-01

Traffic, industry and energy production and consumption within urban boundaries emit great amounts of CO2 into the atmosphere, creating an urban increment of CO2 mixing ratios compared to the surrounding rural atmosphere. Monitoring CO2 within these 'urban domes' has been proposed as a means to evaluate the effectiveness of policies aiming to mitigate and reduce CO2 urban emissions (CMEGGE, 2010). London is the biggest urban conurbation in Western Europe with more than 8 million inhabitants, and it emitted roughly 45000 ktn CO2 in 2010 (DECC, 2012). In order to develop and implement observational strategies to measure the contribution of urban areas into the global carbon cycle, two airborne surveys were deployed using the Natural and Environment Research Council - Airborne Research and Survey Facility (NERC-ARSF). High frequency measurements of atmospheric CO2, O3, particles and meteorological variables were taken over London in October 2011 and July 2012. CO2 mixing ratios were measured by a Non-Dispersive IR instrument developed by AOS. In July 2012, a Cavity Ring-Down Spectroscopy (CDRS) instrument developed by PICARRO was deployed measuring CO2, CH4 and water vapour at 1Hz resolution. The objectives of the campaigns were to measure the CO2 dome over London and to calculate CO2 emissions at the urban-regional-scale. London was crossed by two transects (SW-NE and SSE-NNW) at an altitude of 360 m and vertical profiles up to 2000 m were carried out to characterize the structure of the atmosphere. Aircraft measurements allowed observation on how CO2 domes were shaped by meteorological conditions. In October 2011, the mean CO2 mixing ratio measured in London was on average 2 ppmv higher than the suburban measurements within the boundary layer. However, under low wind speeds, the CO2 mixing ratio in the urban mixing ratio peaked in central London (>10 ppmv) and decreased towards the city boundaries. Under windy conditions, the structure of the urban dome was dispersed downwind, with peak concentrations displaced from the urban centre along the main wind direction. The urban-regional surface CO2 flux was calculated for four days in October 2011 by either the Integrative Mass Boundary Layer (IMBL) or the Column Integration method (CIM), dependent on meteorological conditions. The diurnal CO2 flux in London obtained from the aircraft observations ranged from 36 to 71 μmol CO2 m-2 s-1 during the day time. This compared well with continuous measurements of CO2 exchange by an eddy-covariance system located in central London. The day-to-day variability observed in the calculated CO2 fluxes responded to the spatial variability of the influence area and emissions that observations were sensitive to. This study provides an example how aircraft surveys in urban areas can be used to estimate CO2 surface fluxes at the urban-regional scale. It also presents an important cross-validation of two independent measurement-based methods to infer the contribution of urban areas to climate change in terms of CO2 emissions that complement bottom-up emissions inventories. References Committee on Methods for Estimating Greenhouse Gas Emissions (2010), The National Academia Press. DECC (2012), http://www.decc.gov.uk/en/content/cms/statistics/indicators/ni186/ni186.aspx

[Trends and characteristics of urbanization in the Third World, the day before yesterday to the day after tomorrow (1900-2025)].

PubMed

Bairoch, P

1983-01-01

This article reviews the history of Third World urbanization, examines the evolution of the urban population from 1970-80 based on the 1st results of the 1980 round of censuses, and examines the prospects for urbanization through the end of the century and the year 2025. From 1910 to World War II the urban population in all Third World countries grew more rapidly than the total population. Both rates of growth were moderate compared to subsequent rates. Total Third World population grew by about .9%/year while the urban population grew at 2.2%/year. From 1950-80 total population grew at 2.2% and the urban population by 4.6%. The urban growth took place in the absence of economic developments capable of explaining or justifying it. Urban growth accounted in large part for the extraordinary increase in cereal importation to the Third World. In 1980 it was estimated that 26.5% of the population if Africa, 63.1% in Latin America, and 25.4% in Asian countries excluding China were urban. A characteristic of third World urbanization is the strong concentration of population in large cities; 43% of the urban population currently lives in cities with population of over 500,000. In Third World market countries, total population growth from 1970-80 is provisionally estimated at 2.5-2.6%/year, while according to UN estimates urban population growth amounted to 4.2%/year and other estimates place population growth amounted to 4.2%/year and other estimates place it at 4.4%/year. The growth of the urban population in China from 1970-80 was estimated at 3.3%/year by the UN. During the 75 years from 1950-2025, the Third World urban population is expected to multiply by a factor of 16, from less than 200 million to over 3 billion. The urban population in 2025 projected by the UN amounts to 837 million in Africa, 724 million in Latin America, and 1.6 billion in Asian market countries, but there is some suggestion that the projection errs on the low side. Increases in food production on the order of 1.9%/year will be required through 2025 to feed the new urban population at the current level. Around the year 2000, cities of 1 million or more will contain about 46% of the urban population and 21% of the total population. The largest Third World cities will continue to grow despite their poor living conditions and lack of economic justification, and the low incomes of the inhabitants will increase the difficulty of improving living standards. Predictions as far ahead as 2025 are hazardous, but it is likely that the rate of growth of the largest cities will have abated somewhat.

Juvenile coho salmon growth and health in streams across an urbanization gradient

USGS Publications Warehouse

Spanjer, Andrew R.; Moran, Patrick W.; Larsen, Kimberly; Wetzel, Lisa; Hansen, Adam G.; Beauchamp, David A.

2018-01-01

Expanding human population and urbanization alters freshwater systems through structural changes to habitat, temperature effects from increased runoff and reduced canopy cover, altered flows, and increased toxicants. Current stream assessments stop short of measuring health or condition of species utilizing these freshwater habitats and fail to link specific stressors mechanistically to the health of organisms in the stream. Juvenile fish growth integrates both external and internal conditions providing a useful indicator of habitat quality and ecosystem health. Thus, there is a need to account for ecological and environmental influences on fish growth accurately. Bioenergetics models can simulate changes in growth and consumption in response to environmental conditions and food availability to account for interactions between an organism's environmental experience and utilization of available resources. The bioenergetics approach accounts for how thermal regime, food supply, and food quality affect fish growth. This study used a bioenergetics modeling approach to evaluate the environmental factors influencing juvenile coho salmon growth among ten Pacific Northwest streams spanning an urban gradient. Urban streams tended to be warmer, have earlier emergence dates and stronger early season growth. However, fish in urban streams experienced increased stress through lower growth efficiencies, especially later in the summer as temperatures warmed, with as much as a 16.6% reduction when compared to fish from other streams. Bioenergetics modeling successfully characterized salmonid growth in small perennial streams as part of a more extensive monitoring program and provides a powerful assessment tool for characterizing mixed life-stage specific responses in urban streams.

Kinetic mechanism of V-shaped twinning in 3C/4H-SiC heteroepitaxy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xin, Bin; Zhang, Yu-Ming; Jia, Ren-Xu, E-mail: rxjia@mail.xidian.edu.cn

The authors investigated the kinetic mechanism of V-shaped twinning in 3C/4H-SiC heteroepitaxy. A fourfold V-shaped twinning complex was found, and its interface was measured with high-resolution transmission electron microscopy (HRTEM). Two linear coherent boundaries and a nonlinear incoherent boundary (also called the double-position boundary) were observed. On the basis of the HRTEM results, the authors proposed an adatom migration growth model, in which the activation barrier at the coherent boundary is much lower than that at the incoherent boundary. From a kinetic perspective, adatoms are prone to migrate to the side of the boundary with the lower potential energy ifmore » they have sufficient thermal energy to overcome the activation barrier. In the case of a coherent boundary, the growth rates of the domains either side of the boundary can be balanced through the intermigration of adatoms, leading to a linear boundary. Conversely, it is difficult for adatoms to migrate across an incoherent boundary, which results in asynchronous growth rates and a nonlinear boundary.« less

Urban population growth and urbanization in the Caribbean.

PubMed

Hope, K R

1985-01-01

The structure, sources, consequences, and policy implications of urbanization and of the rapid growth of the urban population in the Caribbean are examined. In particular, a comparative analysis of the situation in Barbados, Guyana, Jamaica, and Trinidad and Tobago is presented. Data are from a variety of secondary sources, including those published by the United Nations and the World Bank. The need to reorient policies to favor rural rather than urban areas in order to reduce rural-urban migration is noted.

Dendrometer studies in urban and rural environments in Stockholm, Sweden

NASA Astrophysics Data System (ADS)

Rocha, Eva; Holzkämper, Steffen

2017-04-01

With this study we investigate growth performances of Pinus sylvestris growing under the influence of the Urban Heat Island of the city of Stockholm, Sweden, and trees growing in the rural surrounding of the city. The aims of this investigation are to see whether and how much the growth performances differ, and which climatic parameters control the tree growth at the respective locations. Stockholm holds one of the world's longest observational climate records, reaching back to AD 1756. Since climate data are collected at a location which today is well within the Urban Heat Island, it is relevant to quantify the correlation differences between climate and tree growth data from trees which actually grow under the same climate conditions and trees growing under natural, rural climate conditions. Applied methods include Remote Sensing and GIS for identification and characterization of the Urban Heat Island, monitoring of tree growth at 30 min-resolution with point dendrometers (Ecomatik) and monitoring of local climate directly at the tree sites. First results indicate emphasized growth differences between the urban and the rural sites, with distinctively higher daily diameter change amplitudes at the urban sites compared to the rural sites, which can be explained by differences in relative humidity and temperature ranges between the sites. We will present and discuss results from 1 year of measurements, focusing on correlation analysis between climate and tree growth data from urban and rural sites, as well as practical issues with dendrometer measurements.

Characterization and Low-Dimensional Modeling of Urban Fluid Flow

DTIC Science & Technology

2014-10-06

4 2 Wind Tunnel , Apparatus and Data Processing 7 2.1 Modelling of the Atmospheric Boundary Layer...was demonstrated. Most notably, wind tunnel experiments were performed at a number of different angles of incidence, providing for the first time a...Coceal and Belcher [2004] developed an urban canopy model for mean winds in urban areas that compares well with data from wind tunnel experiments

The footprint of urban heat island effect in China

Treesearch

Decheng Zhou; Shuqing Zhao; Liangxia Zhang; Ge Sun; Yongqiang Liu

2015-01-01

Urban heat island (UHI) is one major anthropogenic modification to the Earth system that transcends its physical boundary. Using MODIS data from 2003 to 2012, we showed that the UHI effect decayed exponentially toward rural areas for majority of the 32 Chinese cities. We found an obvious urban/ rural temperature “cliff”, and estimated that the footprint of UHI effect (...

Slow Growth and Urban Sprawl: Support for a New Regional Agenda?

ERIC Educational Resources Information Center

Gainsborough, Juliet F.

2002-01-01

Assessed the possibilities for coalition building around growth related concerns, exploring support for slowing growth in New York City and Los Angeles. Analyzed data from surveys of urban and suburban dwellers regarding support for growth control measures. Suburbanites were much more receptive to slow growth policies than were urbanites, though…

Ethnic Groups in Urban Areas; Community Formation and Growth: A Selected Bibliography. Council of Planning Librarians Exchange Bibliography Series, Number 202.

ERIC Educational Resources Information Center

Thompson, Bryan; Vance, Mary, Ed.

This bibliography deals with ethnic settlement patterns in urban areas. The emphasis is on factors that determine initial settlement, subsequent intraurban migration and community growth, and their relationship with the more general questions of urban structure and growth. The selection is by no means exhaustive, and was not compiled in any…

[Effects of migration on the fertility component of urban growth: the case of Tunis].

PubMed

Picouet, M R

1983-01-01

The relationships among fertility, migration, and urban growth are explored using data from a survey of migration and employment in the city of Tunis, Tunisia. The survey, undertaken in 1972 and 1973, includes data on 1,850 households. Consideration is given to the process of integration of migrant women into urban life and to the consequent changes in their fertility behavior. The problems that these changes in fertility pose for the process of estimating the respective contributions of immigration and fertility to the rate of urban growth are considered.

Diffusive growth of a single droplet with three different boundary conditions

NASA Astrophysics Data System (ADS)

Tavassoli, Z.; Rodgers, G. J.

2000-02-01

We study a single, motionless three-dimensional droplet growing by adsorption of diffusing monomers on a 2D substrate. The diffusing monomers are adsorbed at the aggregate perimeter of the droplet with different boundary conditions. Models with both an adsorption boundary condition and a radiation boundary condition, as well as a phenomenological model, are considered and solved in a quasistatic approximation. The latter two models allow particle detachment. In the short time limit, the droplet radius grows as a power of the time with exponents of 1/4, 1/2 and 3/4 for the models with adsorption, radiation and phenomenological boundary conditions, respectively. In the long time limit a universal growth rate as $[t/\\ln(t)]^{1/3}$ is observed for the radius of the droplet for all models independent of the boundary conditions. This asymptotic behaviour was obtained by Krapivsky \\cite{krapquasi} where a similarity variable approach was used to treat the growth of a droplet with an adsorption boundary condition based on a quasistatic approximation. Another boundary condition with a constant flux of monomers at the aggregate perimeter is also examined. The results exhibit a power law growth rate with an exponent of 1/3 for all times.

The Leaf Adaxial-Abaxial Boundary and Lamina Growth

PubMed Central

Nakata, Miyuki; Okada, Kiyotaka

2013-01-01

In multicellular organisms, boundaries have a role in preventing the intermingling of two different cell populations and in organizing the morphogenesis of organs and the entire organism. Plant leaves have two different cell populations, the adaxial (or upper) and abaxial (or lower) cell populations, and the boundary is considered to be important for lamina growth. At the boundary between the adaxial and abaxial epidermis, corresponding to the margin, margin-specific structures are developed and structurally separate the adaxial and abaxial epidermis from each other. The adaxial and abaxial cells are determined by the adaxial and abaxial regulatory genes (including transcription factors and small RNAs), respectively. Among many lamina-growth regulators identified by recent genetic analyses, it has been revealed that the phytohormone, auxin, and the WOX family transcription factors act at the adaxial-abaxial boundary downstream of the adaxial-abaxial pattern. Furthermore, mutant analyses of the WOX genes shed light on the role of the adaxial-abaxial boundary in preventing the mixing of the adaxial and abaxial features during lamina growth. In this review, we highlight the recent studies on the dual role of the adaxial-abaxial boundary. PMID:27137371

Initiation and growth of the discontinuous precipitation reaction at [0 1 1] symmetric tilt boundaries in Cu-Be alloy bicrystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monzen, R.; Watanabe, C.; Mino, D.

2005-02-01

The initiation and growth of discontinuous precipitation (DP) at [0 1 1] symmetric tilt boundaries in Cu-0.75 wt% Be alloy bicrystals have been studied. Transmission electron microscopy revealed that {gamma} precipitates tended to nucleate at a boundary in such a manner that their habit plane, (1 1 2){sub {alpha}} or (4 4 5){sub {alpha}}, with one of the adjoining grains lay as close as possible to the boundary. The habit plane with a low energy formed on both sides of the precipitates behind an initially migrating boundary, indicating the importance of the existence of the low-energy habit plane for themore » initial boundary migration. The incubation period to initiate DP and cell growth rate for a boundary show a good correlation with the energy of the boundary. A kinetic analysis of DP using the models of Turnbull, and Petermann and Hornbogen has yielded boundary diffusion data. A higher-energy boundary has a higher diffusivity with a smaller activation energy.« less

Effects of local film properties on the nucleation and growth of tin whiskers and hillocks

NASA Astrophysics Data System (ADS)

Sarobol, Pylin

Whiskers and hillocks grow spontaneously on Pb-free Sn electrodeposited films as a response to thin film stresses. Stress relaxation occurs by atom deposition to specific grain boundaries in the plane of the film, with hillocks being formed when grain boundary migration accompanies growth out of the plane of the film. The implication for whisker formation in electronics is serious: whiskers can grow to be millimeters long, sometimes causing short circuiting between adjacent components and, thereby, posing serious electrical reliability risks. In order to develop more effective whisker mitigation strategies, a predictive physics-based model has been needed. A growth model is developed, based on grain boundary faceting, localized Coble creep, as well as grain boundary sliding for whiskers, and grain boundary sliding with shear induced grain boundary migration for hillocks. In this model of whisker formation, two mechanisms are important: accretion of atoms by Coble creep on grain boundary planes normal to the growth direction inducing a grain boundary shear and grain boundary sliding in the direction of whisker growth. The model accurately captures the importance of the geometry of "surface grains"---shallow grains on film surfaces whose depths are significantly less than their in-plane grain sizes. A critical factor in the analysis is the ratio of the grain boundary sliding coefficient to the in-plane film compressive stress. If the accretion-induced shear stresses are not coupled to grain boundary motion and sliding occurs, a whisker forms. If the shear stress is coupled to grain boundary migration, a hillock forms. Based on this model, long whiskers grow from shallow surface grains with easy grain boundary sliding in the direction of growth. Other observed growth morphologies will be discussed in light of our model. Additional insights into the preferred sites for whisker and hillock growth were developed based on elastic anisotropy, local film microstructure, grain misorientation, and elastic strain energy density (ESED) as the driving force for growth. Local grain orientations and strains measured by synchrotron micro-diffraction in regions containing whiskers or hillocks were compared with elastic finite element analysis simulations, including Sn elastic anisotropy. Whisker and hillock grains were observed to have higher crystallographic misorientations with neighboring grains than generally observed in the microstructure. While elastic simulations predicted higher local out-of-plane elastic strains and ESEDs for whisker and hillock grains, synchrotron measurements of out-of-plane strains of whisker and hillock grains after growth showed relaxation, with correspondingly low ESEDs calculated from measured strains. This suggests that, before whisker or hillock formation, highly misoriented grains with high out-of-plane elastic strains and ESEDs relative to their neighbors determined, at least in part, which grains became whiskers or hillocks. Based on the models and experiments in this thesis, a clearer picture emerges of the necessary and sufficient conditions for tin whisker and hillock formation in thin films.

Where Deforestation Leads to Urbanization: How Resource Extraction is Leading to Urban Growth in the Brazilian Amazon.

PubMed

Richards, Peter; VanWey, Leah

2015-07-01

Developing the Amazon into a major provider of internationally traded mineral and food commodities has dramatically transformed broad expanses of tropical forests to farm and pasturelands, and to mining sites. The environmental impacts of this transformation, as well as the drivers underlying the process, have already been well documented. In this article we turn our analytical lenses to another, less examined effect of Amazon land use and environmental change, namely the creation and development of new urban areas. Here we argue that urban growth in the Amazon is a direct residual of international interest in the production of traded commodities, and of the capacity of local urban residents to capture capital and value before it is extracted from the region. Specifically, we suggest that urban growth is occurring fastest where cities have access to both rural export commodities and export corridors. We also show correlations between urban growth and lower rural population density, and cities' capacities to draw migrants from beyond their immediate rural surroundings. More broadly, we argue that urbanization in the Amazon is better interpreted as a symptom rather than a driver of the region's land use and land cover change.

Where Deforestation Leads to Urbanization: How Resource Extraction is Leading to Urban Growth in the Brazilian Amazon

PubMed Central

VanWey, Leah

2015-01-01

Developing the Amazon into a major provider of internationally traded mineral and food commodities has dramatically transformed broad expanses of tropical forests to farm and pasturelands, and to mining sites. The environmental impacts of this transformation, as well as the drivers underlying the process, have already been well documented. In this article we turn our analytical lenses to another, less examined effect of Amazon land use and environmental change, namely the creation and development of new urban areas. Here we argue that urban growth in the Amazon is a direct residual of international interest in the production of traded commodities, and of the capacity of local urban residents to capture capital and value before it is extracted from the region. Specifically, we suggest that urban growth is occurring fastest where cities have access to both rural export commodities and export corridors. We also show correlations between urban growth and lower rural population density, and cities’ capacities to draw migrants from beyond their immediate rural surroundings. More broadly, we argue that urbanization in the Amazon is better interpreted as a symptom rather than a driver of the region’s land use and land cover change. PMID:26985079

Traversing School-Community Partnerships Utilizing Cross-Boundary Leadership

ERIC Educational Resources Information Center

Krumm, Bernita L.; Curry, Katherine

2017-01-01

Utilizing the conceptual framework of cross-boundary leadership, researchers conducted this qualitative case study to gain a better understanding of district-level leaders' actions and attitudes that led to meaningful, sustainable partnerships between the school, families, and community. Administrators in two urban, two suburban, and two rural…

ADVANCED URBANIZED METEOROLOGICAL MODELING AND AIR QUALITY SIMULATIONS WITH CMAQ AT NEIGHBORHOOD SCALES

EPA Science Inventory

We present results from a study testing the new boundary layer parameterization method, the canopy drag approach (DA) which is designed to explicitly simulate the effects of buildings, street and tree canopies on the dynamic, thermodynamic structure and dispersion fields in urban...

Formation of the wave compressional boundary in the earth's foreshock

NASA Technical Reports Server (NTRS)

Skadron, George; Holdaway, Robert D.; Lee, Martin A.

1988-01-01

Using an evolutionary model and allowing for nonuniform proton injection and wave growth rates, the compressional wave boundaries corresponding to IMF inclinations to the solar wind of theta(BV) equal to 45 and 25 deg were located. The compressional boundaries deduced from this model were found to support the results of Greenstadt and Baum (1986) who have concluded that the observed compressional boundaries are incompatible with wave growth at a fixed growth rate, due to the interaction of a uniform beam with the solar wind. The results indicate, however, that the compressional boundaries are quite compatible with nonuniform beams and growth rates which result from the coupled evolution of the energetic protons and the waves with which they interact. It was found that, in the solar wind frame, the dominant wave-particle interaction in the outer foreshock is the damping of inward propagating (toward the shock) left-polarized waves, producing a magnetically quiet region immediately downstream of the foreshock boundary.

Urbanization and the wealth of nations.

PubMed

Bloom, David E; Canning, David; Fink, Günther

2008-02-08

The proportion of a country's population living in urban areas is highly correlated with its level of income. Urban areas offer economies of scale and richer market structures, and there is strong evidence that workers in urban areas are individually more productive, and earn more, than rural workers. However, rapid urbanization is also associated with crowding, environmental degradation, and other impediments to productivity. Overall, we find no evidence that the level of urbanization affects the rate of economic growth. Our findings weaken the rationale for either encouraging or discouraging urbanization as part of a strategy for economic growth.

O(minus 2) grain boundary diffusion and grain growth in pure dense MgO

NASA Technical Reports Server (NTRS)

Kapadia, C. M.; Leipold, M. H.

1973-01-01

Grain growth behavior in fully dense compacts of MgO of very high purity was studied, and the results compared with other similar behaving materials. The activation energy for the intrinsic self-diffusion of Mg(2minus) is discussed along with the grain boundary diffusion of O(2minus). Grain boundary diffusion of O(2minus) is proposed as the controlling mechanism for grain growth.

Maximizing oyster-reef growth supports green infrastructure with accelerating sea-level rise

PubMed Central

Ridge, Justin T.; Rodriguez, Antonio B.; Joel Fodrie, F.; Lindquist, Niels L.; Brodeur, Michelle C.; Coleman, Sara E.; Grabowski, Jonathan H.; Theuerkauf, Ethan J.

2015-01-01

Within intertidal communities, aerial exposure (emergence during the tidal cycle) generates strong vertical zonation patterns with distinct growth boundaries regulated by physiological and external stressors. Forecasted accelerations in sea-level rise (SLR) will shift the position of these critical boundaries in ways we cannot yet fully predict, but landward migration will be impaired by coastal development, amplifying the importance of foundation species’ ability to maintain their position relative to rising sea levels via vertical growth. Here we show the effects of emergence on vertical oyster-reef growth by determining the conditions at which intertidal reefs thrive and the sharp boundaries where reefs fail, which shift with changes in sea level. We found that oyster reef growth is unimodal relative to emergence, with greatest growth rates occurring between 20–40% exposure, and zero-growth boundaries at 10% and 55% exposures. Notably, along the lower growth boundary (10%), increased rates of SLR would outpace reef accretion, thereby reducing the depth range of substrate suitable for reef maintenance and formation, and exacerbating habitat loss along developed shorelines. Our results identify where, within intertidal areas, constructed or natural oyster reefs will persist and function best as green infrastructure to enhance coastal resiliency under conditions of accelerating SLR. PMID:26442712

Sensitivity of nocturnal boundary layer temperature to tropospheric aerosol surface radiative forcing under clear-sky conditions

NASA Astrophysics Data System (ADS)

Nair, Udaysankar S.; McNider, Richard; Patadia, Falguni; Christopher, Sundar A.; Fuller, Kirk

2011-01-01

Since the middle of the last century, global surface air temperature exhibits an increasing trend, with nocturnal temperatures increasing at a much higher rate. Proposed causative mechanisms include the radiative impact of atmospheric aerosols on the nocturnal boundary layer (NBL) where the temperature response is amplified due to shallow depth and its sensitivity to potential destabilization. A 1-D version of the Regional Atmospheric Modeling System is used to examine the sensitivity of the nocturnal boundary layer temperature to the surface longwave radiative forcing (SLWRF) from urban aerosol loading and doubled atmospheric carbon dioxide concentrations. The analysis is conducted for typical midlatitude nocturnal boundary layer case days from the CASES-99 field experiment and is further extended to urban sites in Pune and New Delhi, India. For the cases studied, locally, the nocturnal SLWRF from urban atmospheric aerosols (2.7-47 W m-2) is comparable or exceeds that caused by doubled atmospheric carbon dioxide (3 W m-2), with the surface temperature response ranging from a compensation for daytime cooling to an increase in the nocturnal minimum temperature. The sensitivity of the NBL to radiative forcing is approximately 4 times higher compared to the daytime boundary layer. Nighttime warming or cooling may occur depending on the nature of diurnal variations in aerosol optical depth. Soil moisture also modulates the magnitude of SLWRF, decreasing from 3 to 1 W m-2 when soil saturation increases from 37% to 70%. These results show the importance of aerosols on the radiative balance of the climate system.

Spatio-Temporal Dynamics of Urbanization in China: Historical and Future

NASA Astrophysics Data System (ADS)

Zhou, Y.; Smith, S.; Zhao, K.; Imhoff, M. L.; Thomson, A. M.; Eom, J.; Yu, S.; Bond-Lamberty, B. P.

2014-12-01

One way humans affect the Earth is by clearing lands and building cities, a process intricately coupled with population growth. The transformation of terrestrial environments by urbanization has been accelerating during the past 30 years. China, for instance, has experienced urbanization at an unprecedented rate, with the urban population increasing from ~20% to 50% between 1980 and 2010. This urban expansion has resulted in a range of environmental and socioeconomic consequences, such as released carbon, reduced habitats, and threatened biodiversity. Improved information on historical and future urbanization is essential to understand these environmental effects, and to promote a sustainable urbanization in China. Supported by urban maps derived from nightlights remote sensing data and socio-economic drivers, we developed an integrated modeling framework to project future urban expansion in China by integrating a top-down macro-scale statistical model with a bottom-up urban growth model (three examples in Figure 1). With the models calibrated and validated using historical data, we explored annual urban growth at the province level and urban sprawl at the grid level (1-km) over the next two decades under a number of socio-economic scenarios. The results of this study will be of great value with practical implications for a sustainable urbanization (e.g. mitigation of urban heat island).

Environmental Flow Modeling Challenges for Rapidly Urbanizing Watersheds

EPA Science Inventory

It is a challenge for land use planners and water resource managers to balance water needs that support urban growth and economic development of a growing population and yet maintain ecological flow needs. Urban growth and the associated water resources development in a watershed...

Slides from the 2013 Smart Growth Summit on How to Learn from the New Orleans Urban Waters Partnership

EPA Pesticide Factsheets

Presentation Slides for 2013 Smart Growth Summit, Baton Rouge, LA, H2O Overview: How to Learn from the New Orleans Urban Waters Partnership - Danny Wiegand Urban Waters Ambassador to New Orleans November 19, 2013

Examining the contradiction in 'sustainable urban growth': an example of groundwater sustainability

USGS Publications Warehouse

Zellner, Moira L.; Reeves, Howard W.

2012-01-01

The environmental planning literature proposes a set of 'best management practices' for urban development that assumes improvement in environmental quality as a result of specific urban patterns. These best management practices, however, often do not recognise finite biophysical limits and social impacts that urban patterns alone cannot overcome. To shed light on this debate, we explore the effects of different degrees of urban clustering on groundwater levels using a coupled land-use change and groundwater-flow model. Our simulations show that specific urban forms only slow down the impact on groundwater. As population increases, the pattern in which it is accommodated ceases to matter, and widespread depletion ensues. These results are predictable, yet current planning practice tends to take growth for granted and is reluctant to envision either no-growth scenarios or the prospect of depletion. We propose to use simulations such as those presented here to aid in policy discussions that allow decision makers to question the assumption of sustainable growth and suggest alternative forms of development.

Urban growth simulation from "first principles".

PubMed

Andersson, Claes; Lindgren, Kristian; Rasmussen, Steen; White, Roger

2002-08-01

General and mathematically transparent models of urban growth have so far suffered from a lack in microscopic realism. Physical models that have been used for this purpose, i.e., diffusion-limited aggregation, dielectric breakdown models, and correlated percolation all have microscopic dynamics for which analogies with urban growth appear stretched. Based on a Markov random field formulation we have developed a model that is capable of reproducing a variety of important characteristic urban morphologies and that has realistic microscopic dynamics. The results presented in this paper are particularly important in relation to "urban sprawl," an important aspect of which is aggressively spreading low-density land uses. This type of growth is increasingly causing environmental, social, and economical problems around the world. The microdynamics of our model, or its "first principles," can be mapped to human decisions and motivations and thus potentially also to policies and regulations. We measure statistical properties of macrostates generated by the urban growth mechanism that we propose, and we compare these to empirical measurements as well as to results from other models. To showcase the open-endedness of the model and to thereby relate our work to applied urban planning we have also included a simulated city consisting of a large number of land use classes in which also topographical data have been used.

Urban sprawl, smart growth, and deliberative democracy.

PubMed

Resnik, David B

2010-10-01

Urban sprawl is an increasingly common feature of the built environment in the United States and other industrialized nations. Although there is considerable evidence that urban sprawl has adverse affects on public health and the environment, policy frameworks designed to combat sprawl-such as smart growth-have proven to be controversial, making implementation difficult. Smart growth has generated considerable controversy because stakeholders affected by urban planning policies have conflicting interests and divergent moral and political viewpoints. In some of these situations, deliberative democracy-an approach to resolving controversial public-policy questions that emphasizes open, deliberative debate among the affected parties as an alternative to voting-would be a fair and effective way to resolve urban-planning issues.

Policies for managing urban growth and landscape change: a key to conservation in the 21st century

Treesearch

David N., tech. ed. Bengston

2005-01-01

Protecting natural areas in the face of urbanization is one of the most important challenges for conservation in the 21st century. The papers in this collection examine key issues related to growth management and selected approaches to managing urban growth and minimizing its social and environmental costs. They were presented at the 2004 annual meeting of the Society...

Dispersal and fallout simulations for urban consequences management (u)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grinstein, Fernando F; Wachtor, Adam J; Nelson, Matt

2010-01-01

Hazardous chemical, biological, or radioactive releases from leaks, spills, fires, or blasts, may occur (intentionally or accidentally) in urban environments during warfare or as part of terrorist attacks on military bases or other facilities. The associated contaminant dispersion is complex and semi-chaotic. Urban predictive simulation capabilities can have direct impact in many threat-reduction areas of interest, including, urban sensor placement and threat analysis, contaminant transport (CT) effects on surrounding civilian population (dosages, evacuation, shelter-in-place), education and training of rescue teams and services. Detailed simulations for the various processes involved are in principle possible, but generally not fast. Predicting urban airflowmore » accompanied by CT presents extremely challenging requirements. Crucial technical issues include, simulating turbulent fluid and particulate transport, initial and boundary condition modeling incorporating a consistent stratified urban boundary layer with realistic wind fluctuations, and post-processing of the simulation results for practical consequences management. Relevant fluid dynamic processes to be simulated include, detailed energetic and contaminant sources, complex building vortex shedding and flows in recirculation zones, and modeling of particle distributions, including particulate fallout, as well as deposition, re-suspension and evaporation. Other issues include, modeling building damage effects due to eventual blasts, addressing appropriate regional and atmospheric data reduction.« less

Greenhouse gas emission footprints and energy use benchmarks for eight U.S. cities.

PubMed

Hillman, Tim; Ramaswami, Anu

2010-03-15

A hybrid life cycle-based trans-boundary greenhouse gas (GHG) emissions footprint is elucidated at the city-scale and evaluated for 8 US cities. The method incorporates end-uses of energy within city boundaries, plus cross-boundary demand for airline/freight transport and embodied energy of four key urban materials [food, water, energy (fuels), and shelter (cement)], essential for life in all cities. These cross-boundary activities contributed 47% on average more than the in-boundary GHG contributions traditionally reported for cities, indicating significant truncation at city boundaries of GHG emissions associated with urban activities. Incorporating cross-boundary contributions created convergence in per capita GHG emissions from the city-scale (average 23.7 mt-CO(2)e/capita) to the national-scale (24.5 mt-CO(2)e/capita), suggesting that six key cross-boundary activities may suffice to yield a holistic GHG emission footprint for cities, with important policy ramifications. Average GHG contributions from various human activity sectors include buildings/facilities energy use (47.1%), regional surface transport (20.8%), food production (14.7%), transport fuel production (6.4%), airline transport (4.8%), long-distance freight trucking (2.8%), cement production (2.2%), and water/wastewater/waste processing (1.3%). Energy-, travel-, and key materials-consumption efficiency metrics are elucidated in these sectors; these consumption metrics are observed to be largely similar across the eight U.S. cities and consistent with national/regional averages.

School Desegregation and Urban Change: Evidence from City Boundaries†

PubMed Central

Boustan, Leah Platt

2014-01-01

I examine changes in the city-suburban housing price gap in metropolitan areas with and without court-ordered desegregation plans over the 1970s, narrowing my comparison to housing units on opposite sides of district boundaries. Desegregation of public schools in central cities reduced the demand for urban residence, leading urban housing prices and rents to decline by 6 percent relative to neighboring suburbs. Aversion to integration was due both to changes in peer composition and to student reassignment to nonneighborhood schools. The associated reduction in the urban tax base imposed a fiscal externality on remaining urban residents. PMID:24511363

Boundary-Spanner Role Conflict in Public Urban Universities

ERIC Educational Resources Information Center

Gauntner, Joseph; Hansman, Catherine A.

2017-01-01

It is common for universities that seek community partnerships to employ full-time staff, formally sanctioned as boundary spanners, to develop and manage such partnerships. These staff are frequently administrative or allied staff rather than tenure-track faculty or academic unit administrators. Given the multiple interests of universities and…

24 CFR 597.300 - HUD action and review of nominations for designation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT... and must be accompanied by a strategic plan, as required by § 597.200(c), and the certifications... evaluation. (d) Modification of the strategic plan, boundaries of nominated urban areas, and/or period during...

Urban Ecology: Patterns of Population Growth and Ecological Effects

Treesearch

Wayne C. Zipperer; Steward T.A. Pickett

2012-01-01

Currently, over 50% of the world’s population lives in urban areas. By 2050, this estimate is expected to be 70%. This urban growth, however, is not uniformly distributed around the world. The majority of it will occur in developing nations and create megacities whose populations exceed at least 10 million people. Not all urban areas, however, are growing. Some are...

Implications of rural-urban migration for conservation of the Atlantic Forest and urban growth in Misiones, Argentina (1970-2030).

PubMed

Izquierdo, Andrea E; Grau, Héctor R; Aide, T Mitchell

2011-05-01

Global trends of increasing rural-urban migration and population urbanization could provide opportunities for nature conservation, particularly in regions where deforestation is driven by subsistence agriculture. We analyzed the role of rural population as a driver of deforestation and its contribution to urban population growth from 1970 to the present in the Atlantic Forest of Argentina, a global conservation priority. We created future land-use-cover scenarios based on human demographic parameters and the relationship between rural population and land-cover change between 1970 and 2006. In 2006, native forest covered 50% of the province, but by 2030 all scenarios predicted a decrease that ranged from 18 to 39% forest cover. Between 1970 and 2001, rural migrants represented 20% of urban population growth and are expected to represent less than 10% by 2030. This modeling approach shows how rural-urban migration and land-use planning can favor nature conservation with little impact on urban areas.

Effects of urban growth controls on intercity commuting.

PubMed

Ogura, Laudo M

2010-01-01

This paper presents an empirical study of the effects of urban growth controls on the intercity commuting of workers. Growth controls (land use regulations that attempt to restrict population growth and urban sprawl) have increased housing prices and diverted population growth to uncontrolled cities. It has been suggested that resulting changes in local labour supply might stimulate intercity commuting from uncontrolled to controlled cities. To test this hypothesis, a gravity model of commuting flows between places in California is estimated using alternative econometric methods (OLS, Heckman selection and count-data). The possibility of spatial dependence in commuting flows is also taken into consideration. Results suggest larger commuting flows to destination places that restrict residential growth.

Evolution of grain boundary character distributions in alloy 825 tubes during high temperature annealing: Is grain boundary engineering achieved through recrystallization or grain growth?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bai, Qin; Zhao, Qing

Grain boundary engineering (GBE) of nickel-based alloy 825 tubes was carried out with different cold drawing deformations by using a draw-bench on a factory production line and subsequent annealing at various temperatures. The microstructure evolution of alloy 825 during thermal-mechanical processing (TMP) was characterized by means of the electron backscatter diffraction (EBSD) technique to study the TMP effects on the grain boundary network and the evolution of grain boundary character distributions during high temperature annealing. The results showed that the proportion of ∑ 3{sup n} coincidence site lattice (CSL) boundaries of alloy 825 tubes could be increased to > 75%more » by the TMP of 5% cold drawing and subsequent annealing at 1050 °C for 10 min. The microstructures of the partially recrystallized samples and the fully recrystallized samples suggested that the proportion of low ∑ CSL grain boundaries depended on the annealing time. The frequency of low ∑ CSL grain boundaries increases rapidly with increasing annealing time associating with the formation of large-size highly-twinned grains-cluster microstructure during recrystallization. However, upon further increasing annealing time, the frequency of low ∑ CSL grain boundaries decreased markedly during grain growth. So it is concluded that grain boundary engineering is achieved through recrystallization rather than grain growth. - Highlights: •The grain boundary engineering (GBE) is applicable to 825 tubes. •GBE is achieved through recrystallization rather than grain growth. •The low ∑ CSL grain boundaries in 825 tubes can be increased to > 75%.« less

Application of LANDSAT images to wetland study and land use classification in west Tennessee, part 1

NASA Technical Reports Server (NTRS)

Shahrokhi, F. (Principal Investigator); Jones, N. L.

1977-01-01

The author has identified the following significant results. densitometric analysis was performed on LANDSAT data to permit numerical classification of objects observed in the imagery on the basis of measurements of optical density. Relative light transmission measurements were taken on four types of scene elements in each of three LANDSAT black and white bands in order to determine which classification could be distinguished. The analysis of band 6 determined forest and agricultural classifications, but not the urban and wetlands. Both bands 4 and 5 showed a significant difference existed between the confirmed classification of wetlands-agriculture, and urban areas. Therefore, the combination of band 6 with either 4 or 5 would permit the separation of the urban from the wetland classification. To enhance the urban and wetland boundaries, the LANDSAT black and white bands were combined in a multispectral additive color viewer. Several combinations of filters and light intensities were used to obtain maximum discrimination between points of interest. The best results for enhancing wetland boundaries and urban areas were achieved by using a color composite (a blue, green, and red filter on bands 4, 5 and 6 respectively).

Regional assessment of North America: Urbanization trends, biodiversity patterns, and ecosystem services

USGS Publications Warehouse

McPhearson, Timon; Auch, Roger F.; Alberti, Marina

2013-01-01

North America contains some of the most urbanized landscapes in the world. In the United States (U.S.) and Canada, approximately 80 % of the population is urban, with Mexico slightly less (Kaiser Family Foundation 2013). Population growth combined with economic growth has fueled recent urban land expansion in North America. Between 1970 and 2000, urban land area expanded at a rate of 3.31 % (Seto et al. 2011) creating unique challenges for conserving biodiversity and maintaining regional and local ecosystem services.

Studying urban land-atmospheric interactions by coupling an urban canopy model with a single column atmospheric models

NASA Astrophysics Data System (ADS)

Song, J.; Wang, Z.

2013-12-01

Studying urban land-atmospheric interactions by coupling an urban canopy model with a single column atmospheric models Jiyun Song and Zhi-Hua Wang School of Sustainable Engineering and the Built Environment, Arizona State University, PO Box 875306, Tempe, AZ 85287-5306 Landuse landcover changes in urban area will modify surface energy budgets, turbulent fluxes as well as dynamic and thermodynamic structures of the overlying atmospheric boundary layer (ABL). In order to study urban land-atmospheric interactions, we coupled a single column atmospheric model (SCM) to a cutting-edge single layer urban canopy model (SLUCM). Modification of surface parameters such as the fraction of vegetation and engineered pavements, thermal properties of building and pavement materials, and geometrical features of street canyon, etc. in SLUCM dictates the evolution of surface balance of energy, water and momentum. The land surface states then provide lower boundary conditions to the overlying atmosphere, which in turn modulates the modification of ABL structure as well as vertical profiles of temperature, humidity, wind speed and tracer gases. The coupled SLUCM-SCM model is tested against field measurements of surface layer fluxes as well as profiles of temperature and humidity in the mixed layer under convective conditions. After model test, SLUCM-SCM is used to simulate the effect of changing urban land surface conditions on the evolution of ABL structure and dynamics. Simulation results show that despite the prescribed atmospheric forcing, land surface states impose significant impact on the physics of the overlying vertical atmospheric layer. Overall, this numerical framework provides a useful standalone modeling tool to assess the impacts of urban land surface conditions on the local hydrometeorology through land-atmospheric interactions. It also has potentially far-reaching implications to urban ecohydrological services for cities under future expansion and climate challenges.

Tree Productivity Enhanced with Conversion from Forest to Urban Land Covers.

PubMed

Briber, Brittain M; Hutyra, Lucy R; Reinmann, Andrew B; Raciti, Steve M; Dearborn, Victoria K; Holden, Christopher E; Dunn, Allison L

2015-01-01

Urban areas are expanding, changing the structure and productivity of landscapes. While some urban areas have been shown to hold substantial biomass, the productivity of these systems is largely unknown. We assessed how conversion from forest to urban land uses affected both biomass structure and productivity across eastern Massachusetts. We found that urban land uses held less than half the biomass of adjacent forest expanses with a plot level mean biomass density of 33.5 ± 8.0 Mg C ha(-1). As the intensity of urban development increased, the canopy cover, stem density, and biomass decreased. Analysis of Quercus rubra tree cores showed that tree-level basal area increment nearly doubled following development, increasing from 17.1 ± 3.0 to 35.8 ± 4.7 cm(2) yr(-1). Scaling the observed stem densities and growth rates within developed areas suggests an aboveground biomass growth rate of 1.8 ± 0.4 Mg C ha(-1) yr(-1), a growth rate comparable to nearby, intact forests. The contrasting high growth rates and lower biomass pools within urban areas suggest a highly dynamic ecosystem with rapid turnover. As global urban extent continues to grow, cities consider climate mitigation options, and as the verification of net greenhouse gas emissions emerges as critical for policy, quantifying the role of urban vegetation in regional-to-global carbon budgets will become ever more important.

Tree Productivity Enhanced with Conversion from Forest to Urban Land Covers

PubMed Central

Briber, Brittain M.; Hutyra, Lucy R.; Reinmann, Andrew B.; Raciti, Steve M.; Dearborn, Victoria K.; Holden, Christopher E.; Dunn, Allison L.

2015-01-01

Urban areas are expanding, changing the structure and productivity of landscapes. While some urban areas have been shown to hold substantial biomass, the productivity of these systems is largely unknown. We assessed how conversion from forest to urban land uses affected both biomass structure and productivity across eastern Massachusetts. We found that urban land uses held less than half the biomass of adjacent forest expanses with a plot level mean biomass density of 33.5 ± 8.0 Mg C ha-1. As the intensity of urban development increased, the canopy cover, stem density, and biomass decreased. Analysis of Quercus rubra tree cores showed that tree-level basal area increment nearly doubled following development, increasing from 17.1 ± 3.0 to 35.8 ± 4.7 cm2 yr-1. Scaling the observed stem densities and growth rates within developed areas suggests an aboveground biomass growth rate of 1.8 ± 0.4 Mg C ha-1 yr-1, a growth rate comparable to nearby, intact forests. The contrasting high growth rates and lower biomass pools within urban areas suggest a highly dynamic ecosystem with rapid turnover. As global urban extent continues to grow, cities consider climate mitigation options, and as the verification of net greenhouse gas emissions emerges as critical for policy, quantifying the role of urban vegetation in regional-to-global carbon budgets will become ever more important. PMID:26302444

U.S.-Mexico Border Geographic Information System

USGS Publications Warehouse

Parcher, Jean W.

2008-01-01

Geographic Information Systems (GIS) and the development of extensive geodatabases have become invaluable tools for addressing a variety of contemporary societal issues and for making predictions about the future. The United States-Mexico Geographic Information System (USMX-GIS) is based on fundamental datasets that are produced and/or approved by the national geography agencies of each country, the U.S. Geological Survey (USGS) and the Instituto Nacional de Estadistica Y Geografia (INEGI) of Mexico, and the International Boundary and Water Commission (IBWC). The data are available at various scales to allow both regional and local analysis. The USGS and the INEGI have an extensive history of collaboration for transboundary mapping including exchanging digital technology and developing methods for harmonizing seamless national level geospatial datasets for binational environmental monitoring, urban growth analysis, and other scientific applications.

NASA Experimental Program to Stimulate Competitive Research: South Carolina

NASA Technical Reports Server (NTRS)

Sutton, Michael A.

2004-01-01

The use of an appropriate relationship model is critical for reliable prediction of future urban growth. Identification of proper variables and mathematic functions and determination of the weights or coefficients are the key tasks for building such a model. Although the conventional logistic regression model is appropriate for handing land use problems, it appears insufficient to address the issue of interdependency of the predictor variables. This study used an alternative approach to simulation and modeling urban growth using artificial neural networks. It developed an operational neural network model trained using a robust backpropagation method. The model was applied in the Myrtle Beach region of South Carolina, and tested with both global datasets and areal datasets to examine the strength of both regional models and areal models. The results indicate that the neural network model not only has many theoretic advantages over other conventional mathematic models in representing the complex urban systems, but also is practically superior to the logistic model in its capability to predict urban growth with better - accuracy and less variation. The neural network model is particularly effective in terms of successfully identifying urban patterns in the rural areas where the logistic model often falls short. It was also found from the area-based tests that there are significant intra-regional differentiations in urban growth with different rules and rates. This suggests that the global modeling approach, or one model for the entire region, may not be adequate for simulation of a urban growth at the regional scale. Future research should develop methods for identification and subdivision of these areas and use a set of area-based models to address the issues of multi-centered, intra- regionally differentiated urban growth.

Computational fluid dynamics modelling of flow and particulate contaminants sedimentation in an urban stormwater detention and settling basin.

PubMed

Yan, Hexiang; Lipeme Kouyi, Gislain; Gonzalez-Merchan, Carolina; Becouze-Lareure, Céline; Sebastian, Christel; Barraud, Sylvie; Bertrand-Krajewski, Jean-Luc

2014-04-01

Sedimentation is a common but complex phenomenon in the urban drainage system. The settling mechanisms involved in detention basins are still not well understood. The lack of knowledge on sediment transport and settling processes in actual detention basins is still an obstacle to the optimization of the design and the management of the stormwater detention basins. In order to well understand the sedimentation processes, in this paper, a new boundary condition as an attempt to represent the sedimentation processes based on particle tracking approach is presented. The proposed boundary condition is based on the assumption that the flow turbulent kinetic energy near the bottom plays an important role on the sedimentation processes. The simulated results show that the proposed boundary condition appears as a potential capability to identify the preferential sediment zones and to predict the trapping efficiency of the basin during storm events.

Urban tree database and allometric equations

Treesearch

E. Gregory McPherson; Natalie S. van Doorn; Paula J.  Peper

2016-01-01

Information on urban tree growth underpins models used to calculate the effects of trees on the environment and human well-being. Maximum tree size and other growth data are used by urban forest managers, landscape architects, and planners to select trees most suitable to the amount of growing space, thereby reducing costly future conflicts between trees and...

Urbanization and Slum Formation

PubMed Central

Phua, Kai Hong

2007-01-01

The formation of slums need not be inevitable with rapid urbanization. Such an argument appears to be contradicted by evidence of large slum populations in a large number of developing countries and particularly in rapidly urbanizing regions like Asia. The evidence discussed suggests that city authorities faced with rapid urban development lack the capacity to cope with the diverse demands for infrastructural provision to meet economic and social needs. Not only are strategic planning and intervention major issues in agenda to manage rapid urbanization, but city governments are not effectively linking the economic development trajectory to implications for urban growth and, hence, housing needs. In the following discussion, a case study is presented in support of the argument that city governments have to first recognize and then act to establish the link that is crucial between economic development, urban growth, and housing. This is the agendum that has been largely neglected by city and national governments that have been narrowly focused on economic growth with the consequent proliferation of slum formation as a housing solution. PMID:17387618

A coupled model approach to reduce nonpoint-source pollution resulting from predicted urban growth: A case study in the Ambos Nogales watershed

USGS Publications Warehouse

Norman, L.M.; Guertin, D.P.; Feller, M.

2008-01-01

The development of new approaches for understanding processes of urban development and their environmental effects, as well as strategies for sustainable management, is essential in expanding metropolitan areas. This study illustrates the potential of linking urban growth and watershed models to identify problem areas and support long-term watershed planning. Sediment is a primary source of nonpoint-source pollution in surface waters. In urban areas, sediment is intermingled with other surface debris in transport. In an effort to forecast the effects of development on surface-water quality, changes predicted in urban areas by the SLEUTH urban growth model were applied in the context of erosion-sedimentation models (Universal Soil Loss Equation and Spatially Explicit Delivery Models). The models are used to simulate the effect of excluding hot-spot areas of erosion and sedimentation from future urban growth and to predict the impacts of alternative erosion-control scenarios. Ambos Nogales, meaning 'both Nogaleses,' is a name commonly used for the twin border cities of Nogales, Arizona and Nogales, Sonora, Mexico. The Ambos Nogales watershed has experienced a decrease in water quality as a result of urban development in the twin-city area. Population growth rates in Ambos Nogales are high and the resources set in place to accommodate the rapid population influx will soon become overburdened. Because of its remote location and binational governance, monitoring and planning across the border is compromised. One scenario described in this research portrays an improvement in water quality through the identification of high-risk areas using models that simulate their protection from development and replanting with native grasses, while permitting the predicted and inevitable growth elsewhere. This is meant to add to the body of knowledge about forecasting the impact potential of urbanization on sediment delivery to streams for sustainable development, which can be accomplished in a virtual environment. Copyright ?? 2008 by Bellwether Publishing, Ltd. All rights reserved.

Features of bicrystal growth during the directional crystallization of metal melts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gubernatorov, V. V.; Sycheva, T. S., E-mail: sych@imp.uran.ru; Gundyrev, V. M.

2017-03-15

The factors responsible for the formation of different configurations of boundaries between adjacent crystallites during their growth from melt by Bridgman and Czochralski methods have been considered by an of example Fe–20 wt % Ga alloy and Ni bicrystals. It is found that the configuration of intercrystallite boundary is related to the features of crystallite growth, caused by the strained state of intercrystallite and interphase (crystal–melt) boundaries, the difference in the linear thermal expansion coefficients of the crystallite boundaries and bulk, and the shape (geometry) of the bicrystal cross section. It is suggested that the strained state of boundaries andmore » the formation of substructure in crystallites during directional crystallization from metal melt are significantly affected by their deformation under the melt weight.« less

Effect of boundary conditions on thermal plume growth

NASA Astrophysics Data System (ADS)

Kondrashov, A.; Sboev, I.; Rybkin, K.

2016-07-01

We have investigated the influence of boundary conditions on the growth rate of convective plumes. Temperature and rate fields were studied in a rectangular convective cell heated by a spot heater. The results of the full-scale test were compared with the numerical data calculated using the ANSYS CFX software package. The relationship between the heat plume growth rate and heat boundary conditions, the width and height of the cell, size of heater for different kinds of liquid was established.

Vapor hydrogen and oxygen isotopes reflect water of combustion in the urban atmosphere.

PubMed

Gorski, Galen; Strong, Courtenay; Good, Stephen P; Bares, Ryan; Ehleringer, James R; Bowen, Gabriel J

2015-03-17

Anthropogenic modification of the water cycle involves a diversity of processes, many of which have been studied intensively using models and observations. Effective tools for measuring the contribution and fate of combustion-derived water vapor in the atmosphere are lacking, however, and this flux has received relatively little attention. We provide theoretical estimates and a first set of measurements demonstrating that water of combustion is characterized by a distinctive combination of H and O isotope ratios. We show that during periods of relatively low humidity and/or atmospheric stagnation, this isotopic signature can be used to quantify the concentration of water of combustion in the atmospheric boundary layer over Salt Lake City. Combustion-derived vapor concentrations vary between periods of atmospheric stratification and mixing, both on multiday and diurnal timescales, and respond over periods of hours to variations in surface emissions. Our estimates suggest that up to 13% of the boundary layer vapor during the period of study was derived from combustion sources, and both the temporal pattern and magnitude of this contribution were closely reproduced by an independent atmospheric model forced with a fossil fuel emissions data product. Our findings suggest potential for water vapor isotope ratio measurements to be used in conjunction with other tracers to refine the apportionment of urban emissions, and imply that water vapor emissions associated with combustion may be a significant component of the water budget of the urban boundary layer, with potential implications for urban climate, ecohydrology, and photochemistry.

Vapor hydrogen and oxygen isotopes reflect water of combustion in the urban atmosphere

PubMed Central

Gorski, Galen; Strong, Courtenay; Good, Stephen P.; Bares, Ryan; Ehleringer, James R.; Bowen, Gabriel J.

2015-01-01

Anthropogenic modification of the water cycle involves a diversity of processes, many of which have been studied intensively using models and observations. Effective tools for measuring the contribution and fate of combustion-derived water vapor in the atmosphere are lacking, however, and this flux has received relatively little attention. We provide theoretical estimates and a first set of measurements demonstrating that water of combustion is characterized by a distinctive combination of H and O isotope ratios. We show that during periods of relatively low humidity and/or atmospheric stagnation, this isotopic signature can be used to quantify the concentration of water of combustion in the atmospheric boundary layer over Salt Lake City. Combustion-derived vapor concentrations vary between periods of atmospheric stratification and mixing, both on multiday and diurnal timescales, and respond over periods of hours to variations in surface emissions. Our estimates suggest that up to 13% of the boundary layer vapor during the period of study was derived from combustion sources, and both the temporal pattern and magnitude of this contribution were closely reproduced by an independent atmospheric model forced with a fossil fuel emissions data product. Our findings suggest potential for water vapor isotope ratio measurements to be used in conjunction with other tracers to refine the apportionment of urban emissions, and imply that water vapor emissions associated with combustion may be a significant component of the water budget of the urban boundary layer, with potential implications for urban climate, ecohydrology, and photochemistry. PMID:25733906

Indonesia's migration transition.

PubMed

Hugo, G

1995-01-01

This article describes population movements in Indonesia in the context of rapid and marked social and economic change. Foreign investment in Indonesia is increasing, and global mass media is available to many households. Agriculture is being commercialized, and structural shifts are occurring in the economy. Educational levels are increasing, and women's role and status are shifting. Population migration has increased over the decades, both short and long distance, permanent and temporary, legal and illegal, and migration to and between urban areas. This article focuses specifically on rural-to-urban migration and international migration. Population settlements are dense in the agriculturally rich inner areas of Java, Bali, and Madura. Although the rate of growth of the gross domestic product was 6.8% annually during 1969-94, the World Bank ranked Indonesia as a low-income economy in 1992 because of the large population size. Income per capita is US $670. Indonesia is becoming a large exporter of labor to the Middle East, particularly women. The predominance of women as overseas contract workers is changing women's role and status in the family and is controversial due to the cases of mistreatment. Malaysia's high economic growth rate of over 8% per year means an additional 1.3 million foreign workers and technicians are needed. During the 1980s urban growth increased at a very rapid rate. Urban growth tended to occur along corridors and major transportation routes around urban areas. It is posited that most of the urban growth is due to rural-to-urban migration. Data limitations prevent an exact determination of the extent of rural-to-urban migration. More women are estimated to be involved in movements to cities during the 1980s compared to the 1970s. Recruiters and middlemen have played an important role in rural-to-urban migration and international migration.

The future is urban.

PubMed

1992-05-01

Urban centers are growing due to natural increase and the movement of people from rural areas. Urban areas are the traditional centers of trade, science, and culture, but growth over a threshold results in crime, congestion, and pollution. Sustainability is threatened in modern towns that are dependent on other sources for food, fuel, or water. Housing, water, food supplies, and sanitation, communication, and transportation services are threatened in rapidly growing cities. In 1990 45/100 people lived in towns or cities. Hyper-cities have grown in number to 20, of which 14 are in developing countries. 83% of world population increase is expected to occur in cities. In 48 countries with faster population growth cities had growth rates averaging about 6.1% per year, and the urban share of total population averaged 2.8%. In 49 countries with slower population growth, urban growth rates averaged only 3.6% per year, and the urban share of total population averaged about 1.8%. Squatter settlements are endemic to urban areas that are congested and without basic services, limited housing particularly for the poor, and few job opportunities. The number of street children in urban areas has risen. This child population is subjected to low wages, overwork, auto accidents, poor health, and lack of social services. Malnutrition is a more serious issue in urban areas. In the Philippines malnutrition is 3% nationally and 9% in Metro Manila. Rural land reform in the Philippines is no longer a viable solution. In Metro Manila squatters are expected to increase in number to 4 million people by the year 2000, which would be almost 50% of total population. The squatter areas are areas of neglect, decay, and poverty. Cities are viewed as development's "blind alleys."

Effectiveness of Different Urban Heat Island Mitigation Methods and Their Regional Impacts

NASA Astrophysics Data System (ADS)

Zhang, N.

2017-12-01

Cool roofs and green roofs are two popular methods to mitigate urban heat island and improve urban climate. The effectiveness of different urban heat island mitigation strategies in the summer of 2013 in the Yangtze River Delta, China is investigated using the WRF (Weather Research and Forecasting) model coupled with a physically based urban canopy model. The modifications to the roof surface changed the urban surface radiation balance and then modified the local surface energy budget. Both cool roofs and green roofs led to lower surface skin temperature and near-surface air temperature. Increasing the roof albedo to 0.5 caused a similar effectiveness as covering 25% of urban roofs with vegetation; increasing roof albedo to 0.7 caused a similar near-surface air temperature decrease as 75% green roof coverage. The near-surface relative humidity increased in both cool roof and green roof experiments because of the combination of the impacts of increases in specific humidity and decreases in air temperature. The regional impacts of cool roofs and green roofs were evaluated using the regional effect index. The regional effect could be found in both near-surface air temperature and surface specific/relative humidity when the percentage of roofs covered with high albedo materials or green roofs reached a higher fraction (greater than 50%). The changes in the vertical profiles of temperature cause a more stable atmospheric boundary layer over the urban area; at the same time, the crossover phenomena occurred above the boundary layer due to the decrease in vertical wind speed.

Comparison of CO2 Emissions Data for 30 Cities from Different Sources

NASA Astrophysics Data System (ADS)

Nakagawa, Y.; Koide, D.; Ito, A.; Saito, M.; Hirata, R.

2017-12-01

Many sources suggest that cities account for a large proportion of global anthropogenic greenhouse gas emissions. Therefore, in search for the best ways to reduce total anthropogenic greenhouse gas emissions, a focus on the city emission is crucial. In this study, we collected CO2 emissions data in 30 cities during 1990-2015 and evaluated the degree of variance between data sources. The CO2 emissions data were obtained from academic papers, municipal reports, and high-resolution emissions maps (CIDIACv2016, EDGARv4.2, ODIACv2016, and FFDASv2.0). To extract urban CO2 emissions from the high-resolution emissions maps, urban fraction ranging from 0 to 1 was calculated for each 1×1 degree grid cell using the global land cover data (SYNMAP). Total CO2 emissions from the grid cells in which urban fraction occupies greater than or equal to 0.9 were regarded as urban CO2 emissions. The estimated CO2 emissions varied greatly depending on the information sources, even in the same year. There was a large difference between CO2 emissions collected from academic papers, municipal reports, and those extracted from high-resolution emissions maps. One reason is that they use different city boundaries. That is, the city proper (i.e. the political city boundary) is often defined as the city boundary in academic papers and municipal reports, whereas the urban area is used in the high-resolution emissions maps. Furthermore, there was a large variation in CO2 emissions collected from academic papers and municipal reports. These differences may be due to the difference in the assumptions such as allocation ratio of CO2 emissions to producers and consumers. In general, the consumption-based assignment of emissions gives higher estimates of urban CO2 emission in comparison with production-based assignment. Furthermore, there was also a large variation in CO2 emissions extracted from high-resolution emissions maps. This difference would be attributable to differences in information used in the spatial disaggregation of emissions. To identify the CO2 emissions from cities, it is necessary to determine common definitions of city boundaries, allocation ratio of CO2 emissions to consumption and production, and refined approach of the spatial disaggregation of CO2 emissions in high-resolution emissions maps.

An obsolete dichotomy? Rethinking the rural–urban interface in terms of food security and production in the global south.

PubMed

Lerner, Amy M; Eakin, Hallie

2011-01-01

The global food system is coming under increasing strain in the face of urban population growth. The recent spike in global food prices (2007–08) provoked consumer protests, and raised questions about food sovereignty and how and where food will be produced. Concurrently, for the first time in history the majority of the global population is urban, with the bulk of urban growth occurring in smaller-tiered cities and urban peripheries, or ‘peri-urban’ areas of the developing world. This paper discusses the new emerging spaces that incorporate a mosaic of urban and rural worlds, and reviews the implications of these spaces for livelihoods and food security. We propose a modified livelihoods framework to evaluate the contexts in which food production persists within broader processes of landscape and livelihood transformation in peri-urban locations. Where and how food production persists are central questions for the future of food security in an urbanising world. Our proposed framework provides directions for future research and highlights the role of policy and planning in reconciling food production with urban growth.

Landscape analysis of urban growth patterns in Seremban, Malaysia, using spatio-temporal data

NASA Astrophysics Data System (ADS)

Aburas, Maher M.; Abdullah, Sabrina H.; Ramli, Mohammad F.; As'shari, Zulfa H.

2016-06-01

Urban growth is one of the major issues that have played a significant role in destroying the ecosystem in recent years. Landscape analysis is an important technique widely used to evaluate urban growth patterns. In this study, four land-use maps from 1984, 1990, 2000, and 2010 have been used to analyze an urban landscape. The values of a built-up area were initially computed using a geographic information system environment based on the spatial gradient approach. Mathematical matrices were then used to determine the amount of change in urban patches in each direction. Results of the number of patches, landscape shape index, aggregation index, and total edges confirmed that the urban patches in Seremban, Malaysia, have become more dispersed from 2000 to 2010. The urban patches have also become more continuous, especially in the north-western part of Seremban as a result of the urban development in the Nilai District. These results indicate the necessity to create new policies in the city to protect the sustainability of the land use of Seremban.

Urbanization and carbon dioxide emissions in Singapore: evidence from the ARDL approach.

PubMed

Ali, Hamisu Sadi; Abdul-Rahim, A S; Ribadu, Mohammed Bashir

2017-01-01

The main aim of this article is to examine empirically the impact of urbanization on carbon dioxide emissions in Singapore from 1970 to 2015. The autoregressive distributed lags (ARDL) approach is applied within the analysis. The main finding reveals a negative and significant impact of urbanization on carbon emissions in Singapore, which means that urban development in Singapore is not a barrier to the improvement of environmental quality. Thus, urbanization enhances environmental quality by reducing carbon emissions in the sample country. The result also highlighted that economic growth has a positive and significant impact on carbon emissions, which suggests that economic growth reduces environmental quality through its direct effect of increasing carbon emissions in the country. Despite the high level of urbanization in Singapore, which shows that 100 % of the populace is living in the urban center, it does not lead to more environmental degradation. Hence, urbanization will not be considered an obstacle when initiating policies that will be used to reduce environmental degradation in the country. Policy makers should consider the country's level of economic growth instead of urbanization when formulating policies to reduce environmental degradation, due to its direct impact on increasing carbon dioxide emissions.

Endless urban growth? On the mismatch of population, household and urban land area growth and its effects on the urban debate.

PubMed

Haase, Dagmar; Kabisch, Nadja; Haase, Annegret

2013-01-01

In European cities, the rate of population growth has declined significantly, while the number of households has increased. This increase in the number of households is associated with an increase in space for housing. To date, the effects of both a declining population and decreasing household numbers remain unclear. In this paper, we analyse the relationship between population and household number development in 188 European cities from 1990-2000 and 2000-2006 to the growth of urban land area and per capita living space. Our results support a trend toward decreasing population with simultaneously increasing household number. However, we also found cites facing both a declining population and a decreasing household number. Nevertheless, the urban land area of these "double-declining" cities has continued to spread because the increasing per capita living space counteracts a reduction in land consumption. We conclude that neither a decline in population nor in household number "automatically" solve the global problem of land consumption.

Project ATLANTA (ATlanta Land-use ANalysis: Temperature and Air quality): A Study of how the Urban Landscape Affects Meteorology and Air Quality Through Time

NASA Technical Reports Server (NTRS)

Quattrochi, Dale A.; Luvall, Jeffrey C.; Estes, Maurice G.; Lo, C. P.; Kidder, Stanley Q.; Hafner, Jan; Taha, Haider; Bornstein, Robert D.; Gillies, Robert R.; Gallo, Kevin P.

1998-01-01

It is our intent through this investigation to help facilitate measures that can be Project ATLANTA (ATlanta Land-use ANalysis: applied to mitigate climatological or air quality Temperature and Air-quality) is a NASA Earth degradation, or to design alternate measures to sustain Observing System (EOS) Interdisciplinary Science or improve the overall urban environment in the future. investigation that seeks to observe, measure, model, and analyze how the rapid growth of the Atlanta. The primary objectives for this research effort are: 1) To In the last half of the 20th century, Atlanta, investigate and model the relationship between Atlanta Georgia has risen as the premier commercial, urban growth, land cover change, and the development industrial, and transportation urban area of the of the urban heat island phenomenon through time at southeastern United States. The rapid growth of the nested spatial scales from local to regional; 2) To Atlanta area, particularly within the last 25 years, has investigate and model the relationship between Atlanta made Atlanta one of the fastest growing metropolitan urban growth and land cover change on air quality areas in the United States. The population of the through time at nested spatial scales from local to Atlanta metropolitan area increased 27% between 1970 regional; and 3) To model the overall effects of urban and 1980, and 33% between 1980-1990 (Research development on surface energy budget characteristics Atlanta, Inc., 1993). Concomitant with this high rate of across the Atlanta urban landscape through time at population growth, has been an explosive growth in nested spatial scales from local to regional. Our key retail, industrial, commercial, and transportation goal is to derive a better scientific understanding of how services within the Atlanta region. This has resulted in land cover changes associated with urbanization in the tremendous land cover change dynamics within the Atlanta area, principally in transforming forest lands to metropolitan region, wherein urbanization has urban land covers through time, has, and will, effect consumed vast acreas of land adjacent to the city local and regional climate, surface energy flux, and air proper and has pushed the rural/urban fringe farther quality characteristics. Allied with this goal is the and farther away from the original Atlanta urban core. prospect that the results from this research can be An enormous transition of land from forest and applied by urban planners, environmental managers agriculture to urban land uses has occurred in the and other decision-makers, for determining how Atlanta area in the last 25 years, along with subsequent urbanization has impacted the climate and overall

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahmed, K.; Tonks, M.; Zhang, Y.

A detailed phase field model for the effect of pore drag on grain growth kinetics was implemented in MARMOT. The model takes into consideration both the curvature-driven grain boundary motion and pore migration by surface diffusion. As such, the model accounts for the interaction between pore and grain boundary kinetics, which tends to retard the grain growth process. Our 2D and 3D simulations demonstrate that the model capture all possible pore-grain boundary interactions proposed in theoretical models. For high enough surface mobility, the pores move along with the migrating boundary as a quasi-rigid-body, albeit hindering its migration rate compared tomore » the pore-free case. For less mobile pores, the migrating boundary can separate from the pores. For the pore-controlled grain growth kinetics, the model predicts a strong dependence of the growth rate on the number of pores, pore size, and surface diffusivity in agreement with theroretical models. An evolution equation for the grain size that includes these parameters was derived and showed to agree well with numerical solution. It shows a smooth transition from boundary-controlled kinetics to pore-controlled kinetics as the surface diffusivity decreases or the number of pores or their size increases. This equation can be utilized in BISON to give accurate estimate for the grain size evolution. This will be accomplished in the near future. The effect of solute drag and anisotropy of grain boundary on grain growth will be investigated in future studies.« less

Urban growth patterns in major Southeast Asian cities: Toward exposure mapping and vulnerability assessment

NASA Astrophysics Data System (ADS)

Mandapaka, Pradeep; Kamarajugedda, Shankar A.; Lo, Edmond Y. M.

2017-04-01

Southeast Asia (SEA) is undergoing rapid urbanization, with urban population percentage increasing from 32% in 1990 to 48% in 2015. It is projected that by the year 2040, urban regions in SEA account for 60% of its total population. The region is home to 600 million people, with many densely populated cities, including megacities such as Jakarta, Bangkok, and Manila. The region has more than 20,000 islands, and many cities lie on coastal low-lands and floodplains. These geographical characteristics together with the increasing population, infrastructure growth, and changing climate makes the region highly vulnerable to natural hazards. This study assessed urban growth dynamics in major (defined as population exceeding 1 million) SEA cities using remotely sensed night-time lights (NTL) data. A recently proposed brightness gradient approach was applied on 21 years (1992-2012) of NTL annual composites to derive core-urban (CU) and peri-urban (PU) regions within each city. The study also assessed the sensitivity of above extracted urban categories to different NTL thresholds. The temporal trends in CU and PU regions were quantified, and compared with trends in socio-economic indicators. The spatial expansion of CU and PU regions were found to depend on geographical constraints and socio-economic factors. Quantification of urban growth spatial-temporal patterns, as conducted here contributes towards the understanding of exposure and vulnerability of people and infrastructures to natural hazards, as well as the evolving trends for assessment under projected urbanization conditions. This will underpin better risk assessment efforts for present and future planning.

On the growth of turbulent regions in laminar boundary layers

NASA Technical Reports Server (NTRS)

Gad-El-hak, M.; Riley, J. J.; Blackwelder, R. F.

1981-01-01

Turbulent spots evolving in a laminar boundary layer on a nominally zero pressure gradient flat plate are investigated. The plate is towed through an 18 m water channel, using a carriage that rides on a continuously replenished oil film giving a vibrationless tow. Turbulent spots are initiated using a solenoid valve that ejects a small amount of fluid through a minute hole on the working surface. A novel visualization technique that utilizes fluorescent dye excited by a sheet of laser light is employed. Some new aspects of the growth and entrainment of turbulent spots, especially with regard to lateral growth, are inferred from the present experiments. To supplement the information on lateral spreading, a turbulent wedge created by placing a roughness element in the laminar boundary layer is also studied both visually and with probe measurements. The present results show that, in addition to entrainment, another mechanism is needed to explain the lateral growth characteristics of a turbulent region in a laminar boundary layer. This mechanism, termed growth by destabilization, appears to be a result of the turbulence destabilizing the unstable laminar boundary layer in its vicinity. To further understand the growth mechanisms, the turbulence in the spot is modulated using drag-reducing additives and salinity stratification.

Texture enhancement during grain growth of magnesium alloy AZ31B

DOE PAGES

Bhattacharyya, Jishnu J.; Agnew, S. R.; Muralidharan, G.

2015-01-03

In this paper, the microstructure and texture evolution during annealing of rolled Mg alloy AZ31B, at temperatures ranging from 260 to 450°C, is characterized, and a grain growth exponent of n=5, indicating inhibition of grain growth, is observed. Broadening of the normalized grain size distributions, which indicates abnormal grain growth, was observed at all temperatures investigated. It is shown, using a Zener-type analysis for pinning of grain boundaries by particles, that impurity-based particles are responsible for grain growth inhibition and abnormal grain growth. The strong basal texture which develops during rolling of the Mg alloy, resulting in an initial peakmore » intensity in the (0002) pole figure of nine multiples of a random distribution (MRD), increases to ~15 MRD during annealing at 400 and 450°C. Furthermore, a specific texture component {0001}(1120) is observed in the orientation distribution, which increases from 10 to 23 MRD at 400°C. It is hypothesized that the anisotropic grain boundary properties (i.e. low angle boundaries have low energy and mobility) are responsible for the texture strengthening. Additionally, electron backscattered diffraction reveals the recrystallized microstructure to contain a significant number of boundaries with ~30° misorientation about the <0001> direction, and this boundary type persists throughout most annealing treatments explored.« less

Urban runoff (URO) process for MODFLOW 2005: simulation of sub-grid scale urban hydrologic processes in Broward County, FL

USGS Publications Warehouse

Decker, Jeremy D.; Hughes, J.D.

2013-01-01

Climate change and sea-level rise could cause substantial changes in urban runoff and flooding in low-lying coast landscapes. A major challenge for local government officials and decision makers is to translate the potential global effects of climate change into actionable and cost-effective adaptation and mitigation strategies at county and municipal scales. A MODFLOW process is used to represent sub-grid scale hydrology in urban settings to help address these issues. Coupled interception, surface water, depression, and unsaturated zone storage are represented. A two-dimensional diffusive wave approximation is used to represent overland flow. Three different options for representing infiltration and recharge are presented. Additional features include structure, barrier, and culvert flow between adjacent cells, specified stage boundaries, critical flow boundaries, source/sink surface-water terms, and the bi-directional runoff to MODFLOW Surface-Water Routing process. Some abilities of the Urban RunOff (URO) process are demonstrated with a synthetic problem using four land uses and varying cell coverages. Precipitation from a hypothetical storm was applied and cell by cell surface-water depth, groundwater level, infiltration rate, and groundwater recharge rate are shown. Results indicate the URO process has the ability to produce time-varying, water-content dependent infiltration and leakage, and successfully interacts with MODFLOW.

Sustained growth but non-sustainable urbanisation in Penang, Malaysia.

PubMed

Fold, N; Wangel, A

1998-05-01

Penang, Malaysia, has been a city characterized by urban growth and rapid industrialization for the past 25 years. Foreign capital, especially from the transnational electronics industry, has spurred the process of urban growth in the city. While the state government is clearly trying to copy and adapt some form of a Singapore model of development and growth in Penang, the quantitative and qualitative demands for labor exceed the available supply from the country's northern states. Local and national labor policies are decided without the involvement of trade unions, which lack the strength to substantially improve wages or influence the institutions of the labor market. Therefore, an energized labor market attempts to balance the upgrading of skills and the control of wages. Focus upon sustainable urbanization will renew the debate on urban, export-oriented industrialization in southeast Asia.

Lunar architecture and urbanism

NASA Astrophysics Data System (ADS)

Sherwood, Brent

1992-09-01

Human civilization and architecture have defined each other for over 5000 years on Earth. Even in the novel environment of space, persistent issues of human urbanism will eclipse, within a historically short time, the technical challenges of space settlement that dominate our current view. By adding modern topics in space engineering, planetology, life support, human factors, material invention, and conservation to their already renaissance array of expertise, urban designers can responsibly apply ancient, proven standards to the exciting new opportunities afforded by space. Inescapable facts about the Moon set real boundaries within which tenable lunar urbanism and its component architecture must eventually develop.

Lunar architecture and urbanism

NASA Technical Reports Server (NTRS)

Sherwood, Brent

1992-01-01

Human civilization and architecture have defined each other for over 5000 years on Earth. Even in the novel environment of space, persistent issues of human urbanism will eclipse, within a historically short time, the technical challenges of space settlement that dominate our current view. By adding modern topics in space engineering, planetology, life support, human factors, material invention, and conservation to their already renaissance array of expertise, urban designers can responsibly apply ancient, proven standards to the exciting new opportunities afforded by space. Inescapable facts about the Moon set real boundaries within which tenable lunar urbanism and its component architecture must eventually develop.

Strategies for transdisciplinary research on peri-urban groundwater management in the Ganges delta

NASA Astrophysics Data System (ADS)

Hermans, Leon; Thissen, Wil; Gomes, Sharlene; Banerjee, Poulomi; Narain, Vishal; Salehin, Mashfiqus; Hasan, Rezaul; Barua, Anamika; Alam Khan, Shah; Bhattacharya, Samir; Kempers, Remi; Banerjee, Parthasarathi; Hossain, Zakir; Majumdar, Binoy; Hossain, Riad

2016-04-01

Transdisciplinary science transcends disciplinary boundaries. The reasons to engage in transdisciplinary science are many and include the desire to nurture a more direct relationship between science and society, as well as the desire to explain phenomena that cannot be explained by any of the existing disciplinary bodies of knowledge in isolation. Both reasons also reinforce each other, as reality often features a level of complexity that demands and inspires the combination of scientific knowledge from various disciplines. The challenge in transdisciplinary science, however, is not so much to cross disciplinary boundaries, but to ensure an effective connection between disciplines. This contribution reports on the strategy used in a transdisciplinary research project to address groundwater management in peri-urban areas in the Ganges delta. Groundwater management in peri-urban areas in rapidly urbanizing deltas is affected by diverse forces such as rapid population growth, increased economic activity and changing livelihood patterns, and other forces which result in a growing pressure on available groundwater resources. Understanding the intervention possibilities for a more sustainable groundwater management in these peri-urban areas requires an understanding of the dynamic interplay between various sub-systems, such as the physical groundwater system, the water using activities in households and livelihoods, and the institutional system of formal and informal rules that are used by various parties to access groundwater resources and to distribute the associated societal and economic costs and benefits. The ambition in the reported project is to contribute both new scientific knowledge, as well as build capacity with peri-urban stakeholders to improve the sustainability and equitability of local groundwater management. This is done by combining science and development activities, led by different organizations. The scientific component further consists of three sub-components. The connection between these scientific disciplines is made by using a multi-polar strategy. Each research works with a different framework rooted in its own scientific discipline, featuring its own concepts and theories: a hydrogeological framework, a sustainable livelihoods framework and an institutional development framework. Rather than forcing these frameworks into a new framework that is perhaps only fit for the purpose of this single research, the disciplinary frameworks are left in-tact, but are connected by a translation of key variables from one framework to the other. Often, what is an exogenous variable in one framework, is endogenous in another, and vice versa. Investigating the connections between these different poles would require an integrating perspective, for which again different scientific integration perspectives will be explored, rooted in different scientific traditions. The poster will present this framework and the initial findings and experiences with this transdisciplinary research strategy.

An Introduction to the Reform Strategy Which Stresses the Development of Urban School Capacities for Problem Solving.

ERIC Educational Resources Information Center

Wilson, Stephen

An urban school reform strategy which stresses the development of local capacities for problem solving is described in this paper. The context which gave rise to this conceptualization of reform is analyzed and some difficulties with the conceptualization are discussed. Difficulties include ambiguities about the boundaries of "local,"…

Sero-prevalence of foot-and-mouth disease (FMD) in large ruminants at peri urban dairy farms near Islamabad, Pakistan

USDA-ARS?s Scientific Manuscript database

Foot-and-mouth disease (FMD) is an important, endemic, trans-boundary viral disease affecting livestock in Pakistan and associated with high economic losses. This survey was conducted to estimate sero-prevalence of FMD in large ruminants from peri-urban dairy farms near Islamabad. Serum samples were...

Redesigning Urban Districts in the USA: Mayoral Accountability and the Diverse Provider Model

ERIC Educational Resources Information Center

Wong, Kenneth K.

2011-01-01

In response to public pressure, urban districts in the USA have initiated reforms that aim at redrawing the boundaries between the school system and other major local institutions. More specifically, this article focuses on two emerging reform strategies. We will examine an emerging model of governance that enables big-city mayors to establish…

At the Boundaries, in the Trenches: Curriculum Development and Implementation in Learning Communities at an Urban Commuter College

ERIC Educational Resources Information Center

Belton, Ellen R.; Lander, Tracey F.

2008-01-01

One of the greatest difficulties facing learning community programs at urban non-residential colleges and universities is the challenge of promoting communication and collaboration among faculty from different disciplines. In this article, the authors, a learning communities coordinator and a learning communities faculty team member, describe and…

Editorial: Mapping the Intellectual Landscape of Landscape and Urban Planning

Treesearch

Paul H. Gobster; Wei-Ning. Xiang

2012-01-01

Maps are central to our understanding of landscapes. When this Editorship began to revise the journal's Aims and Scope for presentation in a forthcoming editorial, we sought ways in which we could identify the core knowledge base and boundaries, however permeable, of what the journal community considers to be Landscape and Urban Planning (LAND). Strategically, we...

Use of semipermeable membrane devices (SPMD) to assess occurrence and estimate water concentrations of selected organic compounds in the Rio Grande from Presidio to Brownsville, Texas

USGS Publications Warehouse

Moring, J. Bruce

1999-01-01

In Texas, the Rio Grande forms the international boundary between Mexico and the United States and extends about 2,000 kilometers from El Paso to the mouth of the Rio Grande just south of Brownsville, where the river flows into the Gulf of Mexico (fig. 1). The North American Free Trade Agreement (NAFTA) has resulted in increased industrialization and population growth on both sides of the international boundary, which in turn has focused attention on environmental issues, including water quality and quantity in the Rio Grande. Nonpoint urban and agricultural runoff and wastewater discharges from industrial and municipal facilities are potential sources of organic compounds such as polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Historical applications of organochlorine pesticides such as DOT and chlordane in the United States and Mexico have resulted in a continuing source of these environmentally longlived compounds in the Rio Grande Basin. In the United States, all organochlorine pesticides either have been banned entirely or have use restrictions. However, in Mexico, the organochlorine pesticide DOT is still in use, although with some application restrictions.

The Emerging Spatial Organization of the Metropolis: Zones of Diversity and Minority Enclaves in Chicago

PubMed Central

Zhang, Wenquan; Logan, John R.

2018-01-01

The rapid growth of Asian and Hispanic populations in urban areas is superceding traditional classifications of neighborhoods (for example as white, transitional, or minority). The “global neighborhood” that includes all groups (white, black, Hispanic and Asian) is one important new category. We examine the emerging spatial pattern of racial/ethnic composition in the Chicago metropolis, documenting an expansion of all-minority neighborhoods in the city and just beyond its borders, a shrinking set of all-white neighborhoods in the outer suburbs, and more diverse neighborhoods including whites mainly in between. The most novel element of this pattern is how large the zone of diversity has become and how far it extends into suburbia, upending the old dichotomy of “chocolate city” and “vanilla suburbs.” In addition to comparing the distance of different kinds of neighborhoods from the urban core, we also analyze their adjacency to neighborhoods of the same type or other types. There is a strong tendency toward spatial clustering of each neighborhood type and also for transitions on the boundaries of clusters either to expand or to contract their territory. PMID:29430517

Loss of migration and urbanization in birds: a case study of the blackbird (Turdus merula).

PubMed

Møller, Anders Pape; Jokimäki, Jukka; Skorka, Piotr; Tryjanowski, Piotr

2014-07-01

Many organisms have invaded urban habitats, although the underlying factors initially promoting urbanization remain poorly understood. Partial migration may facilitate urbanization because such populations benefit from surplus food in urban environments during winter, and hence enjoy reduced fitness costs of migratory deaths. We tested this hypothesis in the European blackbird Turdus merula, which has been urbanized since the 19th century, by compiling information on timing of urbanization, migratory status, and population density for 99 cities across the continent. Timing of urbanization was spatially auto-correlated at scales up to 600 km. Analyses of timing of urbanization revealed that urbanization occurred earlier in partially migratory and resident populations than in migratory populations of blackbirds. Independently, this effect was most pronounced in the range of the distribution that currently has the highest population density, suggesting that urbanization facilitated population growth. These findings are consistent with the hypothesis that timing of urbanization is facilitated by partial migration, resulting in subsequent residency and population growth.

Evaluation of urban surface parameterizations in the WRF model using measurements during the Texas Air Quality Study 2006 field campaign

NASA Astrophysics Data System (ADS)

Lee, S.-H.; Kim, S.-W.; Angevine, W. M.; Bianco, L.; McKeen, S. A.; Senff, C. J.; Trainer, M.; Tucker, S. C.; Zamora, R. J.

2011-03-01

The performance of different urban surface parameterizations in the WRF (Weather Research and Forecasting) in simulating urban boundary layer (UBL) was investigated using extensive measurements during the Texas Air Quality Study 2006 field campaign. The extensive field measurements collected on surface (meteorological, wind profiler, energy balance flux) sites, a research aircraft, and a research vessel characterized 3-dimensional atmospheric boundary layer structures over the Houston-Galveston Bay area, providing a unique opportunity for the evaluation of the physical parameterizations. The model simulations were performed over the Houston metropolitan area for a summertime period (12-17 August) using a bulk urban parameterization in the Noah land surface model (original LSM), a modified LSM, and a single-layer urban canopy model (UCM). The UCM simulation compared quite well with the observations over the Houston urban areas, reducing the systematic model biases in the original LSM simulation by 1-2 °C in near-surface air temperature and by 200-400 m in UBL height, on average. A more realistic turbulent (sensible and latent heat) energy partitioning contributed to the improvements in the UCM simulation. The original LSM significantly overestimated the sensible heat flux (~200 W m-2) over the urban areas, resulting in warmer and higher UBL. The modified LSM slightly reduced warm and high biases in near-surface air temperature (0.5-1 °C) and UBL height (~100 m) as a result of the effects of urban vegetation. The relatively strong thermal contrast between the Houston area and the water bodies (Galveston Bay and the Gulf of Mexico) in the LSM simulations enhanced the sea/bay breezes, but the model performance in predicting local wind fields was similar among the simulations in terms of statistical evaluations. These results suggest that a proper surface representation (e.g. urban vegetation, surface morphology) and explicit parameterizations of urban physical processes are required for accurate urban atmospheric numerical modeling.

Calibrated Multi-Temporal Edge Images for City Infrastructure Growth Assessment and Prediction

NASA Astrophysics Data System (ADS)

Al-Ruzouq, R.; Shanableh, A.; Boharoon, Z.; Khalil, M.

2018-03-01

Urban Growth or urbanization can be defined as the gradual process of city's population growth and infrastructure development. It is typically demonstrated by the expansion of a city's infrastructure, mainly development of its roads and buildings. Uncontrolled urban Growth in cities has been responsible for several problems that include living environment, drinking water, noise and air pollution, waste management, traffic congestion and hydraulic processes. Accurate identification of urban growth is of great importance for urban planning and water/land management. Recent advances in satellite imagery, in terms of improved spatial and temporal resolutions, allows for efficient identification of change patterns and the prediction of built-up areas. In this study, two approaches were adapted to quantify and assess the pattern of urbanization, in Ajman City at UAE, during the last three decades. The first approach relies on image processing techniques and multi-temporal Landsat satellite images with ground resolution varying between 15 to 60 meters. In this approach, the derived edge images (roads and buildings) were used as the basis of change detection. The second approach relies on digitizing features from high-resolution images captured at different years. The latest approach was adopted, as a reference and ground truth, to calibrate extracted edges from Landsat images. It has been found that urbanized area almost increased by 12 folds during the period 1975-2015 where the growth of buildings and roads were almost parallel until 2005 when the roads spatial expansion witnessed a steep increase due to the vertical expansion of the City. Extracted Edges features, were successfully used for change detection and quantification in term of buildings and roads.

Multiple seeding for the growth of bulk GdBCO-Ag superconductors with single grain behaviour

NASA Astrophysics Data System (ADS)

Shi, Y.; Durrell, J. H.; Dennis, A. R.; Huang, K.; Namburi, D. K.; Zhou, D.; Cardwell, D. A.

2017-01-01

Rare earth-barium-copper oxide bulk superconductors fabricated in large or complicated geometries are required for a variety of engineering applications. Initiating crystal growth from multiple seeds reduces the time taken to melt-process individual samples and can reduce the problem of poor crystal texture away from the seed. Grain boundaries between regions of independent crystal growth can reduce significantly the flow of current due to crystallographic misalignment and the agglomeration of impurity phases. Enhanced supercurrent flow at such boundaries has been achieved by minimising the depth of the boundary between A growth sectors generated during the melt growth process by reducing second phase agglomerations and by a new technique for initiating crystal growth that minimises the misalignment between different growth regions. The trapped magnetic fields measured for the resulting samples exhibit a single trapped field peak indicating they are equivalent to conventional single grains.

Study of the urban evolution of Brasilia with the use of LANDSAT data

NASA Technical Reports Server (NTRS)

Deoliveira, M. D. N. (Principal Investigator); Foresti, C.; Niero, M.; Parreiras, E. M. D. F.

1984-01-01

The urban growth of Brasilia within the last ten years is analyzed with special emphasis on the utilization of remote sensing orbital data and automatic image processing. The urban spatial structure and the monitoring of its temporal changes were focused in a whole and dynamic way by the utilization of MSS-LANDSAT images for June 1973, 1978 and 1983. In order to aid data interpretation, a registration algorithm implemented at the Interactive Multispectral Image Analysis System (IMAGE-100) was utilized aiming at the overlap of multitemporal images. The utilization of suitable digital filters, combined with the images overlap, allowed a rapid identification of areas of possible urban growth and oriented the field work. The results obtained permitted an evaluation of the urban growth of Brasilia, taking as reference the proposed stated for the construction of the city.

A time series of urban extent in China using DSMP/OLS nighttime light data

PubMed Central

Chen, Dongsheng; Chen, Le; Wang, Huan; Guan, Qingfeng

2018-01-01

Urban extent data play an important role in urban management and urban studies, such as monitoring the process of urbanization and changes in the spatial configuration of urban areas. Traditional methods of extracting urban-extent information are primarily based on manual investigations and classifications using remote sensing images, and these methods have such problems as large costs in labor and time and low precision. This study proposes an improved, simplified and flexible method for extracting urban extents over multiple scales and the construction of spatiotemporal models using DMSP/OLS nighttime light (NTL) for practical situations. This method eliminates the regional temporal and spatial inconsistency of thresholding NTL in large-scale and multi-temporal scenes. Using this method, we have extracted the urban extents and calculated the corresponding areas on the county, municipal and provincial scales in China from 2000 to 2012. In addition, validation with the data of reference data shows that the overall accuracy (OA), Kappa and F1 Scores were 0.996, 0.793, and 0.782, respectively. We increased the spatial resolution of the urban extent to 500 m (approximately four times finer than the results of previous studies). Based on the urban extent dataset proposed above, we analyzed changes in urban extents over time and observed that urban sprawl has grown in all of the counties of China. We also identified three patterns of urban sprawl: Early Urban Growth, Constant Urban Growth and Recent Urban Growth. In addition, these trends of urban sprawl are consistent with the western, eastern and central cities of China, respectively, in terms of their spatial distribution, socioeconomic characteristics and historical background. Additionally, the urban extents display the spatial configurations of urban areas intuitively. The proposed urban extent dataset is available for download and can provide reference data and support for future studies of urbanization and urban planning. PMID:29795685

The Future of Urbanization: Facing the Ecological and Economic Constraints. Worldwatch Paper 77.

ERIC Educational Resources Information Center

Brown, Lester R.; Jacobson, Jodi L.

Aside from the growth of world population itself, urbanization is the dominant demographic trend of the late twentieth century. The number of people living in cities increased from six hundred million in 1950 to over two billion in 1986. If this growth continues unabated, more than half of humanity will reside in urban areas shortly after the turn…

Monitoring urban growth and detection of land use with GIS and remote sensing: a case study of the Kyrenia region

NASA Astrophysics Data System (ADS)

Kara, Can; Akçit, Nuhcan

2016-08-01

Land-cover change is considered one of the central components in current strategies for managing natural resources and monitoring environmental changes. It is important to manage land resources in a sustainable manner which targets at compacting and consolidating urban development. From 2005 to 2015,urban growth in Kyrenia has been quite dramatic, showing a wide and scattered pattern, lacking proper plan. As a result of this unplanned/unorganized expansion, agricultural areas, vegetation and water bodies have been lost in the region. Therefore, it has become a necessity to analyze the results of this urban growth and compare the losses between land-cover changes. With this goal in mind, a case study of Kyrenia region has been carried out using a supervised image classification method and Landsat TM images acquired in 2005 and 2015 to map and extract land-cover changes. This paper tries to assess urban-growth changes detected in the region by using Remote Sensing and GIS. The study monitors the changes between different land cover types. Also, it shows the urban occupation of primary soil loss and the losses in forest areas, open areas, etc.

Phase-field study of grain boundary tracking behavior in crack-seal microstructures

NASA Astrophysics Data System (ADS)

Ankit, Kumar; Nestler, Britta; Selzer, Michael; Reichardt, Mathias

2013-12-01

In order to address the growth of crystals in veins, a multiphase-field model is used to capture the dynamics of crystals precipitating from a super-saturated solution. To gain a detailed understanding of the polycrystal growth phenomena in veins, we investigate the influence of various boundary conditions on crystal growth. In particular, we analyze the formation of vein microstructures resulting from the free growth of crystals as well as crack-sealing processes. We define the crystal symmetry by considering the anisotropy in surface energy to simulate crystals with flat facets and sharp corners. The resulting growth competition of crystals with different orientations is studied to deduce a consistent orientation selection rule in the free-growth regime. Using crack-sealing simulations, we correlate the grain boundary tracking behavior depending on the relative rate of crack opening, opening trajectory, initial grain size, and wall roughness. Further, we illustrate how these parameters induce the microstructural transition between blocky (crystals growing anisotropically) to fibrous morphology (isotropic) and formation of grain boundaries. The phase-field simulations of crystals in the free-growth regime (in 2D and 3D) indicate that the growth or consumption of a crystal is dependent on the orientation difference with neighboring crystals. The crack-sealing simulation results (in 2D and 3D) reveal that crystals grow isotropically and grain boundaries track the opening trajectory if the wall roughness is high, opening increments are small, and crystals touch the wall before the next crack increment starts. Further, we find that within the complete crack-seal regime, anisotropy in surface energy results in the formation of curved/oscillating grain boundaries (instead of straight) when the crack-opening velocity is increased and wall roughness is not sufficiently high. Additionally, the overall capability of phase-field method to simulate large-scale polycrystal growth in veins (in 3D) is demonstrated enumerating the main advantages of adopting the novel approach.

The Role of Grain Boundary Energy on Grain Boundary Complexion Transitions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bojarski, Stephanie A.; Rohrer, Gregory S.

Grain boundary complexions are distinct equilibrium structures and compositions of a grain boundary and complexion transformations are transition from a metastable to an equilibrium complexion at a specific thermodynamic and geometric conditions. Previous work indicates that, in the case of doped alumina, a complexion transition that increased the mobility of transformed boundaries and resulted in abnormal grain growth also caused a decrease in the mean relative grain boundary energy as well as an increase in the anisotropy of the grain boundary character distribution (GBCD). The current work will investigate the hypothesis that the rates of complexion transitions that result inmore » abnormal grain growth (AGG) depend on grain boundary character and energy. Furthermore, the current work expands upon this understanding and tests the hypothesis that it is possible to control when and where a complexion transition occurs by controlling the local grain boundary energy distribution.« less

[A review on urban metabolism research based on physical space entities for environmental management].

PubMed

Liu, Ye; Liu, Dan

2015-07-01

Urban metabolism is a basic theory for coping with global environmental problems, which is coherent with the aims of national environmental management. This paper analyzed the concept of urban metabolism, and pointed out the meaning for urban metabolism in physical space entities; reviewed the current methods for urban metabolism and its merits and shortages; analyzed the system boundaries, connotation, and methodologies; and summarized the advances on urban meta-bolism practices in physical space entities. At last, we made conclusions that there were shortages, including conception system, basic theory system, and interdisciplinary integrated theory system in current urban metabolism research, and the current cases studied in urban metabolism were limited and not suitable to the harmony development between society, economy, and environment. In the future, we need to strengthen comparison between different case studies from different countries, develop the prior modes of typical urban metabolism research, identify the mechanism for urban ecosystem, and strengthen the spatial decision support system of environmental management taking urban spatial entity spaces as units.

Regional cities in Australia's changing urban system.

PubMed

Beer, A

1995-01-01

"There is evidence that Australia's urban system is changing. Since the mid-1970s there has been growth in the number and total population of regional cities. It is argued that this growth is a product of restructuring and the de-regulation of the Australian economy. Regional cities have become more prominent in the national economy as centres for manufacturing, as a consequence of the growth of tourism and recreation industries, through the decline in some areas of smaller urban settlements and as a result of new mining developments." excerpt

Urbanization in contemporary Arab Gulf states.

PubMed

Qutub, I Y

1983-01-01

Urbanization in the Arab Gulf states of Bahrain, Kuwait, Oman, Qatar, and the United Arab Emirates is analyzed. Topics discussed include the historical background to urbanization; current demographic trends in the region; urban characteristics and growth; socioeconomic factors influencing urbanization, with an emphasis on labor force structure; future urban strategy; and the need for urban research.

3D fold growth rates in transpressional tectonic settings

NASA Astrophysics Data System (ADS)

Frehner, Marcel

2015-04-01

Geological folds are inherently three-dimensional (3D) structures; hence, they also grow in 3D. In this study, fold growth in all three dimensions is quantified numerically using a finite-element algorithm for simulating deformation of Newtonian media in 3D. The presented study is an extension and generalization of the work presented in Frehner (2014), which only considered unidirectional layer-parallel compression. In contrast, the full range from strike slip settings (i.e., simple shear) to unidirectional layer-parallel compression is considered here by varying the convergence angle of the boundary conditions; hence the results are applicable to general transpressional tectonic settings. Only upright symmetrical single-layer fold structures are considered. The horizontal higher-viscous layer exhibits an initial point-like perturbation. Due to the mixed pure- and simple shear boundary conditions a mechanical buckling instability grows from this perturbation in all three dimensions, described by: Fold amplification (vertical growth): Fold amplification describes the growth from a fold shape with low limb-dip angle to a shape with higher limb-dip angle. Fold elongation (growth parallel to fold axis): Fold elongation describes the growth from a dome-shaped (3D) structure to a more cylindrical fold (2D). Sequential fold growth (growth perpendicular to fold axial plane): Sequential fold growth describes the growth of secondary (and further) folds adjacent to the initial isolated fold. The term 'lateral fold growth' is used as an umbrella term for both fold elongation and sequential fold growth. In addition, the orientation of the fold axis is tracked as a function of the convergence angle. Even though the absolute values of all three growth rates are markedly reduced with increasing simple-shear component at the boundaries, the general pattern of the quantified fold growth under the studied general-shear boundary conditions is surprisingly similar to the end-member case of unidirectional layer-parallel compression (Frehner, 2014). Fold growth rates in the two lateral directions are almost identical resulting in bulk fold structures with aspect ratios in map view close to 1. Fold elongation is continuous with increasing bulk deformation, while sequential fold growth exhibits jumps whenever a new sequential fold appears. Compared with the two lateral growth directions, fold amplification exhibits a slightly higher growth rate. The orientation of the fold axis has an angle equal to 1 2 of 90° minus the convergence angle; and this orientation is stable with increasing bulk deformation, i.e. the fold axis does not rotate with increasing general-shear deformation. For example, for simple-shear boundary conditions (convergence angle 0°) the fold axis is stable at an angle of 45° to the boundaries; for a convergence angle of 45° the fold axis is stable at an angle of 22.5° to the boundaries. REFERENCE: Frehner M., 2014: 3D fold growth rates, Terra Nova 26, 417-424, doi:10.1111/ter.12116.

Austenite grain growth simulation considering the solute-drag effect and pinning effect.

PubMed

Fujiyama, Naoto; Nishibata, Toshinobu; Seki, Akira; Hirata, Hiroyuki; Kojima, Kazuhiro; Ogawa, Kazuhiro

2017-01-01

The pinning effect is useful for restraining austenite grain growth in low alloy steel and improving heat affected zone toughness in welded joints. We propose a new calculation model for predicting austenite grain growth behavior. The model is mainly comprised of two theories: the solute-drag effect and the pinning effect of TiN precipitates. The calculation of the solute-drag effect is based on the hypothesis that the width of each austenite grain boundary is constant and that the element content maintains equilibrium segregation at the austenite grain boundaries. We used Hillert's law under the assumption that the austenite grain boundary phase is a liquid so that we could estimate the equilibrium solute concentration at the austenite grain boundaries. The equilibrium solute concentration was calculated using the Thermo-Calc software. Pinning effect was estimated by Nishizawa's equation. The calculated austenite grain growth at 1473-1673 K showed excellent correspondence with the experimental results.

Projected Regional Climate in 2025 Due to Urban Growth

NASA Technical Reports Server (NTRS)

Shepherd, J. Marshall; Manyin, Michael; Messen, Dmitry

2005-01-01

By 2025, 60 to 80 percent of the world s population will live in urban environments. Additionally, the following facts published by the United Nations further illustrates how cities will evolve in the future. Urban areas in the developing world are growing very rapidly. The urban growth rate will continue to be particularly rapid in the urban areas of less developed regions, averaging 2.4 per cent per year during 2000-2030, consistent with a doubling time of 29 years. The urbanization process will continue worldwide. The concentration of population in cities is expected to continue so that, by 2030, 84 percent of the inhabitants of more developed countries will be urban dwellers. Urbanization impacts the whole hierarchy of human settlements. In 2000,24.8 per cent of the world population lived in urban settlements with fewer than 500,000 inhabitants and by 2015 that proportion will likely rise to 27.1 per cent.

Land use/cover change detection and urban sprawl analysis in Bandar Abbas city, Iran.

PubMed

Dadras, Mohsen; Shafri, Helmi Zulhaidi Mohd; Ahmad, Noordin; Pradhan, Biswajeet; Safarpour, Sahabeh

2014-01-01

The process of land use change and urban sprawl has been considered as a prominent characteristic of urban development. This study aims to investigate urban growth process in Bandar Abbas city, Iran, focusing on urban sprawl and land use change during 1956-2012. To calculate urban sprawl and land use changes, aerial photos and satellite images are utilized in different time spans. The results demonstrate that urban region area has changed from 403.77 to 4959.59 hectares between 1956 and 2012. Moreover, the population has increased more than 30 times in last six decades. The major part of population growth is related to migration from other parts the country to Bandar Abbas city. Considering the speed of urban sprawl growth rate, the scale and the role of the city have changed from medium and regional to large scale and transregional. Due to natural and structural limitations, more than 80% of barren lands, stone cliffs, beach zone, and agricultural lands are occupied by built-up areas. Our results revealed that the irregular expansion of Bandar Abbas city must be controlled so that sustainable development could be achieved.

Land Use/Cover Change Detection and Urban Sprawl Analysis in Bandar Abbas City, Iran

PubMed Central

Mohd Shafri, Helmi Zulhaidi; Ahmad, Noordin; Pradhan, Biswajeet; Safarpour, Sahabeh

2014-01-01

The process of land use change and urban sprawl has been considered as a prominent characteristic of urban development. This study aims to investigate urban growth process in Bandar Abbas city, Iran, focusing on urban sprawl and land use change during 1956–2012. To calculate urban sprawl and land use changes, aerial photos and satellite images are utilized in different time spans. The results demonstrate that urban region area has changed from 403.77 to 4959.59 hectares between 1956 and 2012. Moreover, the population has increased more than 30 times in last six decades. The major part of population growth is related to migration from other parts the country to Bandar Abbas city. Considering the speed of urban sprawl growth rate, the scale and the role of the city have changed from medium and regional to large scale and transregional. Due to natural and structural limitations, more than 80% of barren lands, stone cliffs, beach zone, and agricultural lands are occupied by built-up areas. Our results revealed that the irregular expansion of Bandar Abbas city must be controlled so that sustainable development could be achieved. PMID:25276858

Third-world development: urbanizing for the future.

PubMed

Mcilwaine, C

1997-01-01

This article reviews some issues reflected in the 1996 UN Habitat II agenda and recent research on urbanization. The themes of the 1996 Habitat conference were urban development, urban poverty, and governance, civil society, and social capital. It is expected that over 50% of total world population will live in cities in the year 2000. Cities are viewed both as engines of economic growth and centers of severe economic, environmental, and social problems. There is some disagreement about whether cities are rational economic structures or what the World Bank's urban agenda is and its relationship with macroeconomic policy. Discussions of global urban issues are criticized for their neglect of issues of equity and poverty, cultural diversity, and identity and representation. Habitat II also stressed urban sustainability. There is growing recognition that urban management involves more than the "Brown Agenda" of environmental and physical aspects of urban growth. Recent studies identify how politics and power affect people's access to basic urban services. Urban economic activity can also contribute to environmental problems. Urban growth affects the provision of health services. Although there is not a consensus on the role of cities in expanding economic and social development and the best management practices, there is sufficient evidence to indicate that urban processes are varied throughout the developing world. The links between urban and rural areas differentiate cities and expose the need to understand the role of intermediate urban areas surrounding and between larger cities. Poverty has become increasingly urbanized, but the extent of poverty is unknown. Habitat II was an unprecedented effort to engage nongovernment groups, local government staff, trade unions, and the private sector and to emphasize community participation. Networks of trust and reciprocity are key to solving poverty, inequality, and disempowerment problems.

Analysis of urban boundary layer flow and turbulence parameters on the basis of an experimental campaign in Turin city

NASA Astrophysics Data System (ADS)

Trini Castelli, S.; Falabino, S.; Mortarini, L.; Ferrero, E.; Richiardone, R.; Anfossi, D.

2010-09-01

The flow and turbulence structure of the atmospheric boundary layer above urban areas is significantly perturbed by the density and distribution of buildings and other obstacles, by the thermal effect of the so-called ‘urban heat island' and by the possible presence of topographical inhomogeneities. A thorough investigation of the characteristics of the flow and turbulence in urban canopy was pursued both with an experimental approach, carrying out an intensive observational field campaign and analysing the observed data, and evaluating the boundary layer and turbulence parameterisations, which are used in the numerical meteorological and air pollution models. The experimental activity was carried out along a continuous 15-months observational period at four measurement sites, located in the city of Turin. Here we analyse the data gathered at a 25 m mast, displaced at one of the measuring stations and equipped with sonic anemometers at 5 m, 9 m, 25 m height. Close to the mast, a station measuring solar radiation, humidity and temperature at ground level was also active. Since Turin is characterised both by a complex urban fabric and by a very frequent low wind regime, the dataset allows also investigating and estimating the boundary layer parameters in the peculiar conditions of low wind speed. With regard to the dataset, a stationary test singled out that each anemometer recorded about 25-30% of stationary data, but only the 9% of data were simultaneously stationary at the three anemometers. Concerning the stability for the whole dataset, a neutral stratification developed in only the 3% of the cases, while the percentages raise to the 47% and 50% respectively for the stable and the unstable cases. In some cases different stability conditions occurred at different levels, this peculiarity was investigated. At the three levels the distributions of the observed horizontal turbulent velocity fluctuations do not present remarkable differences, whereas the vertical component assumes rather different values. Considering the whole observed data set, low wind speeds, here defined as speed values less than 1.5 m/s, occurred in more than 90% of the cases. A comprehensive analysis of the observed wind velocity and turbulent velocity fluctuations, of the calculated stability parameters, surface layer parameters and boundary layer height is illustrated and discussed. A comparison of the measured wind standard deviation profiles as a function of stability with the values predicted by literature parameterisations for flat undisturbed terrain is also presented.

Examining Urban Expansion Using Multi-Temporal Landsat Imagery: a Case Study of the Montreal Census Metropolitan Area from 1975 TO 2015, Canada

NASA Astrophysics Data System (ADS)

Ma, Lingfei; Zhao, He; Li, Jonathan

2016-06-01

Urban expansion, particularly the movement of residential and commercial land use to sub-urban areas in metropolitan areas, has been considered as a significant signal of regional economic development. In 1970s, the economic centre of Canada moved from Montreal to Toronto. Since some previous research have been focused on the urbanization process in Greater Toronto Area (GTA), it is significant to conduct research in its counterpart. This study evaluates urban expansion process in Montréal census metropolitan area (CMA), Canada, between 1975 and 2015 using satellite images and socio-economic data. Spatial and temporal dynamic information of urbanization process was quantified using Landsat imagery, supervised classification algorithms and the post-classification change detection technique. Accuracy of the Landsat-derived land use classification map ranged from 80% to 97%. The results indicated that continuous growth of built-up areas in the CMA over the study period resulted in a decrease in the area of cultivated land and vegetation. The results showed that urban areas expanded 442 km2 both along major river systems and lakeshores, as well as expanded from urban centres to surrounded areas. The analysis revealed that urban expansion has been largely driven by population growth and economic development. Consequently, the urban expansion maps produced in this research can assist decision-makers to promote sustainable urban development, and forecast potential changes in urbanization growth patterns.

Urbanization in 21st century.

PubMed

Altarejos, R G

1990-01-01

Due to a combination of rapid population growth and high levels of rural-urban migration, overcrowding will be common in many cities around the world in the 21st century. Currently at 5.3 billion, the global population is expected to increase to 6 billion by the year 2000, and to 9 billion by 2025. Experts predict that urban centers will bear the brunt of the population growth. Rural areas have seen declines in the standard of living, partly due to natural disasters, civil war, and economic policies favoring urban centers. In search of jobs, better access to education, and health services, rural populations will flock to cities. But the rapid growth of cities will inevitably lead to the creation of slums, which will hamper urban development. Urban demographers predict that by the end of the century, 1/2 of the world's population will be urban, and 1/5 of these people will be concentrated in "mega cities," populations of 4 million or more. International migration will play a significant role, as people cross borders in search of opportunity. But contrary to the traditional model of urban growth, much of it will take place in developing countries. According to a 1985 study, developed nations had an urbanization level of 71%, compared to 31% in developing countries. However, experts calculate that by 2025, these levels will practically even out, with an urbanization level of 74% for developing countries and 77% for developed countries. By 2025, 25 cities will have populations of over 9 million, including Mexico City (25.8), Sao Paulo (24.0), Tokyo (20.2), Calcutta (16.5), Greater Bombay (16.0), and New York (15.8).

Dynamic Urban Growth Models

DOT National Transportation Integrated Search

1978-12-01

In the report the concept of 'order by fluctuation,' that has appeared recently in physico-chemical and biological systems, is applied to the description of urban growth. It is shown that fluctuations play a vital role in the evolutionary process of ...

Dynamic Urban Growth Models

DOT National Transportation Integrated Search

1979-12-01

In the report the concept of 'order by fluctuation,' that has appeared recently in physico-chemical and biological systems, is applied to the description of urban growth. It is shown that fluctuations play a vital role in the evolutionary process of ...

Inter- and intraannual growth patterns of urban small-leaved lime (Tilia cordata mill.) at two public squares with contrasting microclimatic conditions.

PubMed

Moser, Astrid; Rahman, Mohammad A; Pretzsch, Hans; Pauleit, Stephan; Rötzer, Thomas

2017-06-01

The effects of urban conditions on tree growth have been investigated in an increasing number of studies over the last decades, emphasizing the harsh environment of cities. Urban trees often grow in highly paved, compacted sites with consequently less soil moisture, higher soil temperatures, and greater vapor pressure deficits. However, there is still a knowledge gap regarding the impact of harsh paved environments on urban tree growth during drought years on the growth patterns of urban trees. The present study investigated the structure and growth of the common urban tree species small-leaved lime (Tilia cordata) at a highly paved public square (CPS) compared with a contrasting more open, greener square (OGS). Continuously, measured high precision dendrometer data along with meteorological data of the extreme dry and warm summer 2015 as well as dendrochronological data of the sampled trees were investigated to analyze tree growth during a drought year. The results highlight different tree dimensions and growth patterns of the trees at both sites, influenced by tree age and distinct site conditions. While the trees at OGS grew up to 2.5 mm from July until mid of August, the trees at CPS had only 0.4-mm diameter increment. After the initial expansion at CPS, tree diameter contracted again during summer to the point of shrinkage (up to 0.8 mm) at the end of our investigation. Further drought year analysis confirmed the patterns of significant stem growth reductions in the consecutive two years following the drought. A correlation analysis revealed that transpiration, air temperature, and vapor pressure deficit were negatively correlated with the daily diameter growth, whereas precipitation had a strong positive effect. Due to high transpiration rates associated with anisohydric water use behavior, T. cordata was able to provide evaporative cooling even during drought. However, this anisohydric behavior resulted in substantial growth decline afterwards especially at paved sites like CPS. Our results suggest selection of tree species, such as those with isohydric water use behavior, which may achieve a better balance between growth, transpiration, and hence evaporative cooling.

Role of boundary layer diffusion in vapor deposition growth of chalcogenide nanosheets: the case of GeS.

PubMed

Li, Chun; Huang, Liang; Snigdha, Gayatri Pongur; Yu, Yifei; Cao, Linyou

2012-10-23

We report a synthesis of single-crystalline two-dimensional GeS nanosheets using vapor deposition processes and show that the growth behavior of the nanosheet is substantially different from those of other nanomaterials and thin films grown by vapor depositions. The nanosheet growth is subject to strong influences of the diffusion of source materials through the boundary layer of gas flows. This boundary layer diffusion is found to be the rate-determining step of the growth under typical experimental conditions, evidenced by a substantial dependence of the nanosheet's size on diffusion fluxes. We also find that high-quality GeS nanosheets can grow only in the diffusion-limited regime, as the crystalline quality substantially deteriorates when the rate-determining step is changed away from the boundary layer diffusion. We establish a simple model to analyze the diffusion dynamics in experiments. Our analysis uncovers an intuitive correlation of diffusion flux with the partial pressure of source materials, the flow rate of carrier gas, and the total pressure in the synthetic setup. The observed significant role of boundary layer diffusions in the growth is unique for nanosheets. It may be correlated with the high growth rate of GeS nanosheets, ~3-5 μm/min, which is 1 order of magnitude higher than other nanomaterials (such as nanowires) and thin films. This fundamental understanding of the effect of boundary layer diffusions may generally apply to other chalcogenide nanosheets that can grow rapidly. It can provide useful guidance for the development of general paradigms to control the synthesis of nanosheets.

Process analysis of characteristics of the boundary layer during a heavy haze pollution episode in an inland megacity, China.

PubMed

Wang, Shan; Liao, Tingting; Wang, Lili; Sun, Yang

2016-02-01

Ground observation data from 8 meteorological stations in Xi'an, air mass concentration data from 13 environmental quality monitoring sites in Xi'an, as well as radiosonde observation and wind profile radar data, were used in this study. Thereby, the process, causes and boundary layer meteorological characteristics of a heavy haze episode occurring from 16 to 25 December 2013 in Xi'an were analyzed. Principal component analysis showed that this haze pollution was mainly caused by the high-intensity emission and formation of gaseous pollutants (NO2, CO and SO2) and atmospheric particles (PM2.5 (fine particles) and PM10 (respirable suspended particle). The second cause was the relative humidity and continuous low temperature. The third cause was the allocation of the surface pressure field. The presence of a near-surface temperature inversion at the boundary layer formed favorable stratification conditions for the formation and maintenance of heavy haze pollution. The persistent thick haze layer weakened the solar radiation. Meanwhile, a warming effect in the urban canopy layer and in the transition zone from the urban friction sublayer to the urban canopy was indicated. All these conditions facilitated the maintenance and reinforcement of temperature inversion. The stable atmospheric stratification finally acted on the wind field in the boundary layer, and further weakened the exchange capacity of vertical turbulence. The superposition of a wind field with the horizontal gentle wind induced the typical air stagnation and finally caused the deterioration of air quality during this haze event. Copyright © 2015. Published by Elsevier B.V.

Vapor hydrogen and oxygen isotopes reflect water of combustion in the urban atmosphere

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gorski, Galen; Strong, Courtenay; Good, Stephen P.

Anthropogenic modification of the water cycle involves a diversity of processes, many of which have been studied intensively using models and observations. Some effective tools for measuring the contribution and fate of combustion-derived water vapor in the atmosphere are lacking, however, and this flux has received relatively little attention. We provide theoretical estimates and a first set of measurements demonstrating that water of combustion is characterized by a distinctive combination of H and O isotope ratios. Furthermore, we show that during periods of relatively low humidity and/or atmospheric stagnation, this isotopic signature can be used to quantify the concentration ofmore » water of combustion in the atmospheric boundary layer over Salt Lake City. Combustion-derived vapor concentrations vary between periods of atmospheric stratification and mixing, both on multiday and diurnal timescales, and respond over periods of hours to variations in surface emissions. Our estimates suggest that up to 13% of the boundary layer vapor during the period of study was derived from combustion sources, and both the temporal pattern and magnitude of this contribution were closely reproduced by an independent atmospheric model forced with a fossil fuel emissions data product. These findings suggest potential for water vapor isotope ratio measurements to be used in conjunction with other tracers to refine the apportionment of urban emissions, and imply that water vapor emissions associated with combustion may be a significant component of the water budget of the urban boundary layer, with potential implications for urban climate, ecohydrology, and photochemistry.« less

Vapor hydrogen and oxygen isotopes reflect water of combustion in the urban atmosphere

DOE PAGES

Gorski, Galen; Strong, Courtenay; Good, Stephen P.; ...

2015-03-02

Anthropogenic modification of the water cycle involves a diversity of processes, many of which have been studied intensively using models and observations. Some effective tools for measuring the contribution and fate of combustion-derived water vapor in the atmosphere are lacking, however, and this flux has received relatively little attention. We provide theoretical estimates and a first set of measurements demonstrating that water of combustion is characterized by a distinctive combination of H and O isotope ratios. Furthermore, we show that during periods of relatively low humidity and/or atmospheric stagnation, this isotopic signature can be used to quantify the concentration ofmore » water of combustion in the atmospheric boundary layer over Salt Lake City. Combustion-derived vapor concentrations vary between periods of atmospheric stratification and mixing, both on multiday and diurnal timescales, and respond over periods of hours to variations in surface emissions. Our estimates suggest that up to 13% of the boundary layer vapor during the period of study was derived from combustion sources, and both the temporal pattern and magnitude of this contribution were closely reproduced by an independent atmospheric model forced with a fossil fuel emissions data product. These findings suggest potential for water vapor isotope ratio measurements to be used in conjunction with other tracers to refine the apportionment of urban emissions, and imply that water vapor emissions associated with combustion may be a significant component of the water budget of the urban boundary layer, with potential implications for urban climate, ecohydrology, and photochemistry.« less

Urbanization in Peru. An International Urbanization Survey Report to the Ford Foundation.

ERIC Educational Resources Information Center

Robin, John P.; Terzo, Frederick C.

This survey paper will deal primarily with the following two issues: (1) How to cope with the growth of the metropolitan Lima area, and the current and future stresses on its social and physical environment, and (2) How to develop, if it is possible and desirable to do so, other urban growth poles in the country which will relieve the…

Regional climate model assessment of the urban land-surface forcing over central Europe

NASA Astrophysics Data System (ADS)

Huszar, P.; Halenka, T.; Belda, M.; Zak, M.; Sindelarova, K.; Miksovsky, J.

2014-07-01

For the purpose of qualifying and quantifying the climate impact of cities and urban surfaces in general on climate of central Europe, the surface parameterization in regional climate model RegCM4 has been extended with the Single Layer Urban Canopy Model (SLUCM). A set of experiments was performed over the period of 2005-2009 for central Europe, either without considering urban surfaces or with the SLUCM treatment. Results show a statistically significant impact of urbanized surfaces on temperature (up to 1.5 K increase in summer) as well as on the boundary layer height (increases up to 50 m). Urbanization further influences surface wind with a winter decrease up to -0.6 m s-1, though both increases and decreases were detected in summer depending on the location relative to the cities and daytime (changes up to 0.3 m s-1). Urban surfaces significantly reduce evaporation and thus the humidity over the surface. This impacts the simulated summer precipitation rate, showing decrease over cities up to -2 mm day-1. Significant temperature increases are simulated over higher elevations as well, not only within the urban canopy layer. With the urban parameterization, the climate model better describes the diurnal temperature variation, reducing the cold afternoon and evening bias of RegCM4. Sensitivity experiments were carried out to quantify the response of the meteorological conditions to changes in the parameters specific to the urban environment such as street width, building height, albedo of the roofs and anthropogenic heat release. The results proved to be rather robust and the choice of the key SLUCM parameters impacts them only slightly (mainly temperature, boundary layer height and wind velocity). Statistically significant impacts are modeled not only over large urbanized areas, but the influence of the cities is also evident over rural areas without major urban surfaces. It is shown that this is the result of the combined effect of the distant influence of the cities and the influence of the minor local urban surface coverage.

Regional climate model assessment of the urban land-surface forcing over central Europe

NASA Astrophysics Data System (ADS)

Huszar, P.; Halenka, T.; Belda, M.; Zak, M.; Sindelarova, K.; Miksovsky, J.

2014-11-01

For the purpose of qualifying and quantifying the climate impact of cities and urban surfaces in general on climate of central Europe, the surface parameterization in regional climate model RegCM4 has been extended with the Single-layer Urban Canopy Model (SLUCM). A set of experiments was performed over the period of 2005-2009 for central Europe, either without considering urban surfaces or with the SLUCM treatment. Results show a statistically significant impact of urbanized surfaces on temperature (up to 1.5 K increase in summer) as well as on the boundary layer height (increases up to 50 m). Urbanization further influences surface wind with a winter decrease up to -0.6 m s-1, though both increases and decreases were detected in summer depending on the location relative to the cities and daytime (changes up to 0.3 m s-1). Urban surfaces significantly reduce the humidity over the surface. This impacts the simulated summer precipitation rate, showing a decrease over cities of up to -2 mm day-1. Significant temperature increases are simulated over higher altitudes as well, not only within the urban canopy layer. With the urban parameterization, the climate model better describes the diurnal temperature variation, reducing the cold afternoon and evening bias of RegCM4. Sensitivity experiments were carried out to quantify the response of the meteorological conditions to changes in the parameters specific to the urban environment, such as street width, building height, albedo of the roofs and anthropogenic heat release. The results proved to be rather robust and the choice of the key SLUCM parameters impacts them only slightly (mainly temperature, boundary layer height and wind velocity). Statistically significant impacts are modelled not only over large urbanized areas, but the influence of the cities is also evident over rural areas without major urban surfaces. It is shown that this is the result of the combined effect of the distant influence of the cities and the influence of the minor local urban surface coverage.

Population Growth in New Hampshire during the Nineteenth and Twentieth Centuries. Studies in New England Geography, Number 1.

ERIC Educational Resources Information Center

Hobart, Christine L.

This paper traces the shifts in New Hampshire's state and county population during the nineteenth and twentieth centuries, focusing on the growth of urban centers and industry. From 1790 to 1840 most of New Hampshire's population growth was agricultural despite the beginnings of industrialization and urbanization. These processes greatly…

Urban Planning Problems of Agglomerations

NASA Astrophysics Data System (ADS)

Olenkov, V. D.; Tazeev, N. T.

2017-11-01

The article explores the state of the air basin of the Chelyabinsk agglomeration and gives the examples of solutions for the pollution problems from the point of view of city planning. The main features and structure of the modern urban agglomerations are considered, the methods for determining their boundaries are studied and the main problems are identified. The study of the boundaries and territorial structure of the Chelyabinsk urban agglomeration is conducted, and a general description of the territory is given. The data on the change in the volume of pollutant emissions into the atmosphere and the index of atmospheric pollution for the period 2003-2015 are given basing on the annual comprehensive reports regarding the state of the environment. The review of the world experience of city-planning actions on the decision of ecological problems is carried out. The most suitable ways for the ecological problems solving in the Chelyabinsk agglomeration are considered. The authors give recommendations for the ecological situation improving in the territory of the Chelyabinsk agglomeration.

National forest economic clusters: a new model for assessing national-forest-based natural resources products and services.

Treesearch

Thomas D. Rojas

2007-01-01

National forest lands encompass numerous rural and urban communities. Some national-forest-based communities lie embedded within national forests, and others reside just outside the official boundaries of national forests. The urban and rural communities within or near national forest lands include a wide variety of historical traditions and cultural values that affect...

Breaking the Boundaries: A One-World Approach to Planning Education. Urban Innovation Abroad Series.

ERIC Educational Resources Information Center

Sanyal, Bishwapriya, Ed.

Chapters in this collection present the views of academics and professionals from the Third World who have received their planning education in the west and who now hold posts in western urban and regional planning schools. They discuss the need for a radically changed curriculum based on a comparative, one-world approach to planning education.…

Urban parks as green walls or green magnets? Interracial relations in neighborhood boundary parks

Treesearch

Paul H. Gobster

1998-01-01

A recent paper in this journal (Solecki and Welch, 1995) describes how urban parks that lie between racially different neighborhoods can become "green walls" or barriers to use and appreciation. Although this phenomenon is well grounded in the experience of many who plan for, manage, and live near parks in racially and ethnically segregated cities, an...

Application of LANDSAT data to the study of urban development in Brasilia

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Deoliveira, M. D. L. N.; Foresti, C.; Niero, M.; Parreira, E. M. D. M. F.

1984-01-01

The urban growth of Brasilia within the last ten years is analyzed with special emphasis on the utilization of remote sensing orbital data and automatic image processing. The urban spatial structure and the monitoring of its temporal changes were examined in a whole and dynamic way by the utilization of MSS-LANDSAT images for June (1973, 1978 and 1983). In order to aid data interpretation, a registration algorithm implemented in the Interactive Multispectral Image Analysis System (IMAGE-100) was utilized aiming at the overlap of multitemporal images. The utilization of suitable digital filters, combined with the images overlap, allowed a rapid identification of areas of possible urban growth and oriented the field work. The results obtained in this work permitted an evaluation of the urban growth of Brasilia, taking as reference the proposal stated for the construction of the city in the Pilot Plan elaborated by Lucio Costa.

Wind Tunnel Measurements of Turbulent Boundary Layer over Hypothetical Urban Roughness Elements

NASA Astrophysics Data System (ADS)

Ho, Y. K.; Liu, C. H.

2012-04-01

Urban morphology affects the near-ground atmospheric boundary layer that in turn modifies the wind flows and pollutant dispersion over urban areas. A number of numerical models (large-eddy simulation, LES and k-ɛ turbulence models) have been developed to elucidate the transport processes in and above urban street canyons. To complement the modelling results, we initiated a wind tunnel study to examine the influence of idealized urban roughness on the flow characteristics and pollutant dispersion mechanism over 2D idealized street canyons placed in cross flows. Hot-wire anemometry (HWA) was employed in this study to measure the flows over 2D street canyons in the wind tunnel in our university. Particular focus in the beginning stage was on the fabrication of hot-wire probes, data acquisition system, and signal processing technique. Employing the commonly adopted hot-wire universal function, we investigated the relationship in between and developed a scaling factor which could generalize the output of our hot-wire probes to the standardized one as each hot-wire probes has its unique behaviour. Preliminary experiments were performed to measure the wind flows over street canyons of unity aspect ratio. Vertical profiles of the ensemble average velocity and fluctuations at three different segments over the street canyons were collected. The results were then compared with our LES that show a good argument with each other. Additional experiments are undertaken to collect more data in order to formulate the pollutant dispersion mechanism of street canyons and urban areas.

Impact of Urbanization on Spatial Variability of Rainfall-A case study of Mumbai city with WRF Model

NASA Astrophysics Data System (ADS)

Mathew, M.; Paul, S.; Devanand, A.; Ghosh, S.

2015-12-01

Urban precipitation enhancement has been identified over many cities in India by previous studies conducted. Anthropogenic effects such as change in land cover from hilly forest areas to flat topography with solid concrete infrastructures has certain effect on the local weather, the same way the greenhouse gas has on climate change. Urbanization could alter the large scale forcings to such an extent that it may bring about temporal and spatial changes in the urban weather. The present study investigate the physical processes involved in urban forcings, such as the effect of sudden increase in wind velocity travelling through the channel space in between the dense array of buildings, which give rise to turbulence and air mass instability in urban boundary layer and in return alters the rainfall distribution as well as rainfall initiation. A numerical model study is conducted over Mumbai metropolitan city which lies on the west coast of India, to assess the effect of urban morphology on the increase in number of extreme rainfall events in specific locations. An attempt has been made to simulate twenty extreme rainfall events that occurred over the summer monsoon period of the year 2014 using high resolution WRF-ARW (Weather Research and Forecasting-Advanced Research WRF) model to assess the urban land cover mechanisms that influences precipitation variability over this spatially varying urbanized region. The result is tested against simulations with altered land use. The correlation of precipitation with spatial variability of land use is found using a detailed urban land use classification. The initial and boundary conditions for running the model were obtained from the global model ECMWF(European Centre for Medium Range Weather Forecast) reanalysis data having a horizontal resolution of 0.75 °x 0.75°. The high resolution simulations show significant spatial variability in the accumulated rainfall, within a few kilometers itself. Understanding the spatial variability of precipitation will help in the planning and management of the built environment more efficiently.

Urban growth and landscape connectivity threats assessment at Saguaro National Park, Arizona, USA

USGS Publications Warehouse

Perkl, Ryan; Norman, Laura M.; Mitchell, David; Feller, Mark R.; Smith, Garrett; Wilson, Natalie R.

2018-01-01

Urban and exurban expansion results in habitat and biodiversity loss globally. We hypothesize that a coupled-model approach could connect urban planning for future cities with landscape ecology to consider wildland habitat connectivity. Our work combines urban growth simulations with models of wildlife corridors to examine how species will be impacted by development to test this hypothesis. We leverage a land use change model (SLEUTH) with structural and functional landscape-connectivity modeling techniques to ascertain the spatial extent and locations of connectivity related threats to a national park in southern Arizona, USA, and describe how protected areas might be impacted by urban expansion. Results of projected growth significantly altered structural connectivity (80%) when compared to current (baseline) corridor conditions. Moreover, projected growth impacted functional connectivity differently amongst species, indicating resilience of some species and near-complete displacement of others. We propose that implementing a geospatial-design-based model will allow for a better understanding of the impacts management decisions have on wildlife populations. The application provides the potential to understand both human and environmental impacts of land-system dynamics, critical for long-term sustainability.

Urban Modification of Convection and Rainfall in Complex Terrain

NASA Astrophysics Data System (ADS)

Freitag, B. M.; Nair, U. S.; Niyogi, D.

2018-03-01

Despite a globally growing proportion of cities located in regions of complex terrain, interactions between urbanization and complex terrain and their meteorological impacts are not well understood. We utilize numerical model simulations and satellite data products to investigate such impacts over San Miguel de Tucumán, Argentina. Numerical modeling experiments show urbanization results in 20-30% less precipitation downwind of the city and an eastward shift in precipitation upwind. Our experiments show that changes in surface energy, boundary layer dynamics, and thermodynamics induced by urbanization interact synergistically with the persistent forcing of atmospheric flow by complex terrain. With urbanization increasing in mountainous regions, land-atmosphere feedbacks can exaggerate meteorological forcings leading to weather impacts that require important considerations for sustainable development of urban regions within complex terrain.

Urban and regional planning proposal no. Y-10-066-001

NASA Technical Reports Server (NTRS)

Hannah, J. W.; Thomas, G. L.; Esparza, F. (Principal Investigator)

1973-01-01

The author has identified the following significant results. An investigation is underway to determine the applicability of ERTS-1 data to urban and regional planning problems, using data for East Central Florida. Small scale land use mapping is feasible. Urban and commercial areas are sufficiently distinguishable that ERTS-1 appears to be a useful tool for monitoring urban and commercial growth. Development patterns of cities, growth patterns of cities, and distribution and changes in certain sectors within cities can be analyzed effectively. Digital analysis methods are proving useful.

Hygroscopic growth of size-resolved, emission-source classified, aerosol particles sampled across the United States

NASA Astrophysics Data System (ADS)

Shingler, T.; Crosbie, E. C.; Ziemba, L. D.; Anderson, B. E.; Campuzano Jost, P.; Jimenez, J. L.; Mikoviny, T.; Wisthaler, A.; Sorooshian, A.

2014-12-01

The hygroscopic growth of atmospheric aerosol particles is a key air quality parameter, impacting the radiation budget, visibility, and cloud formation. During the DC3 and SEAC4RS field campaigns (>300 total flight hours), measurements were made over 32 US states, Canada, the Pacific Ocean, and the Gulf of Mexico, between the surface and 41,000 feet ASL. The aircraft research payloads included a suite of in-situ aerosol and gas phase instruments. The Differential Aerosol Sizing and Hygroscopicity Spectrometer Probe (DASH-SP) and the Langley Aerosol Research Group Experiment (LARGE) humidified nephelometer instrument applied different techniques to measure water uptake by aerosol particles at prescribed relative humidity values. Size-resolved growth factor (GF ≡ Dp,wet/Dp,dry) measurements by the DASH-SP are compared to bulk scattering measurements (f(RH) ≡ σscat,wet/σscat,dry) by the LARGE instrument. Spatial location and volatile organic compound tracers such as isoprene and acetonitrile are used to classify the origin of distinct air masses, including: forest fires, biogenic-emitting forests, agricultural use lands, marine boundary layer, urban, and rural background. Analyses of GF results by air mass origin are reported and results are compared with f(RH) measurements. A parameterization between the f(RH) and GF measurements and its potential uses are discussed.

Integrated remote sensing for multi-temporal analysis of urban land cover-climate interactions

NASA Astrophysics Data System (ADS)

Savastru, Dan M.; Zoran, Maria A.; Savastru, Roxana S.

2016-08-01

Climate change is considered to be the biggest environmental threat in the future in the South- Eastern part of Europe. In frame of predicted global warming, urban climate is an important issue in scientific research. Surface energy processes have an essential role in urban weather, climate and hydrosphere cycles, as well in urban heat redistribution. This paper investigated the influences of urban growth on thermal environment in relationship with other biophysical variables in Bucharest metropolitan area of Romania. Remote sensing data from Landsat TM/ETM+ and time series MODIS Terra/Aqua sensors have been used to assess urban land cover- climate interactions over period between 2000 and 2015 years. Vegetation abundances and percent impervious surfaces were derived by means of linear spectral mixture model, and a method for effectively enhancing impervious surface has been developed to accurately examine the urban growth. The land surface temperature (Ts), a key parameter for urban thermal characteristics analysis, was also analyzed in relation with the Normalized Difference Vegetation Index (NDVI) at city level. Based on these parameters, the urban growth, and urban heat island effect (UHI) and the relationships of Ts to other biophysical parameters have been analyzed. The correlation analyses revealed that, at the pixel-scale, Ts possessed a strong positive correlation with percent impervious surfaces and negative correlation with vegetation abundances at the regional scale, respectively. This analysis provided an integrated research scheme and the findings can be very useful for urban ecosystem modeling.

Modelling spatial patterns of urban growth in Africa

PubMed Central

Linard, Catherine; Tatem, Andrew J.; Gilbert, Marius

2013-01-01

The population of Africa is predicted to double over the next 40 years, driving exceptionally high urban expansion rates that will induce significant socio-economic, environmental and health changes. In order to prepare for these changes, it is important to better understand urban growth dynamics in Africa and better predict the spatial pattern of rural-urban conversions. Previous work on urban expansion has been carried out at the city level or at the global level with a relatively coarse 5–10 km resolution. The main objective of the present paper was to develop a modelling approach at an intermediate scale in order to identify factors that influence spatial patterns of urban expansion in Africa. Boosted Regression Tree models were developed to predict the spatial pattern of rural-urban conversions in every large African city. Urban change data between circa 1990 and circa 2000 available for 20 large cities across Africa were used as training data. Results showed that the urban land in a 1 km neighbourhood and the accessibility to the city centre were the most influential variables. Results obtained were generally more accurate than results obtained using a distance-based urban expansion model and showed that the spatial pattern of small, compact and fast growing cities were easier to simulate than cities with lower population densities and a lower growth rate. The simulation method developed here will allow the production of spatially detailed urban expansion forecasts for 2020 and 2025 for Africa, data that are increasingly required by global change modellers. PMID:25152552

Growth mechanisms of perturbations in boundary layers over a compliant wall

NASA Astrophysics Data System (ADS)

Malik, M.; Skote, Martin; Bouffanais, Roland

2018-01-01

The temporal modal and nonmodal growth of three-dimensional perturbations in the boundary layer flow over an infinite compliant flat wall is considered. Using a wall-normal velocity and wall-normal vorticity formalism, the dynamic boundary condition at the compliant wall admits a linear dependence on the eigenvalue parameter, as compared to a quadratic one in the canonical formulation of the problem. As a consequence, the continuous spectrum is accurately obtained. This enables us to effectively filter the pseudospectra, which is a prerequisite to the transient growth analysis. An energy-budget analysis for the least-decaying hydroelastic (static divergence, traveling wave flutter, and near-stationary transitional) and Tollmien-Schlichting modes in the parameter space reveals the primary routes of energy flow. Moreover, the maximum transient growth rate increases more slowly with the Reynolds number than for the solid wall case. The slowdown is due to a complex dependence of the wall-boundary condition with the Reynolds number, which translates into a transition of the fluid-solid interaction from a two-way to a one-way coupling. Unlike the solid-wall case, viscosity plays a pivotal role in the transient growth. The initial and optimal perturbations are compared with the boundary layer flow over a solid wall; differences and similarities are discussed.

Scalar Dispersion from Point Sources in a Realistic Urban Environment

NASA Astrophysics Data System (ADS)

Salesky, S.; Giometto, M. G.; Christen, A.; Parlange, M. B.

2016-12-01

Accurate modeling of scalar dispersion within and above urban canopies is critical to properly predict air quality and dispersion (e.g. accidental contaminant release) in urban environments. We perform large eddy simulations (LES) of scalar dispersion from point sources in a typical North American neighborhood using topography and foliage density derived from airborne LIDAR scans with 1 m resolution in Vancouver, BC, Canada. The added drag force due to trees is parameterized in the LES as a function of the leaf area density (LAD) profile. Conversely, drag from buildings is accounted for using a direct forcing approach immersed-boundary method. The scalar advection-diffusion equation is discretized in a finite-volume framework, and accurate mass conservation is enforced through a recently developed Cartesian cut cell method. Simulations are performed with trees for different values of LAD, representative of summer and winter conditions, as well as a case without trees. The effects of varying mean wind direction (derived from observed wind climatologies) on dispersion patterns are also considered. Scalar release locations in the LES are informed by spatially distributed measurements of carbon dioxide concentration; CO2 is used as a tracer for fossil fuel emissions, since source strengths are well-known and the contribution from biological processes in this setting is small (<10%). The effects of leaf area density, source height, and wind direction on scalar statistics including the growth of the mean concentration plume and the fraction that escapes the urban canopy layer will be considered. In a companion study, the presence of trees was found to strongly modify sweep and ejection patterns for the momentum flux; here we consider the related issue of how vegetation influences coherent structures responsible for scalar transport.

Free tropospheric ozone production following entrainment of urban plumes into deep convection

NASA Technical Reports Server (NTRS)

Pickering, Kenneth E.; Thompson, Anne M.; Scala, John R.; Tao, Wei-Kuo; Dickerson, Russell R.; Simpson, Joanne

1992-01-01

It is shown that rapid vertical transport of air from urban plumes through deep convective clouds can cause substantial enhancement of the rate of O3 production in the free troposphere. Simulation of convective redistribution and subsequent photochemistry of an urban plume from Oklahoma City during the 1985 PRESTORM campaign shows enhancement of O3 production in the free tropospheric cloud outflow layer by a factor of almost 4. In contrast, simulation of convective transport of an urban plume from Manaus, Brazil, into a prestine free troposphere during GTE/ABLE 2B (1987), followed by a photochemical simulation, showed enhancement of O3 production by a factor of 35. The reasons for the different enhancements are (1) intensity of cloud vertical motion; (2) initial boundary layer O3 precursor concentrations; and (3) initial amount of background free tropospheric NO(x). Convective transport of ozone precursors to the middle and upper troposphere allows the resulting O3 to spread over large geographic regions, rather than being confined to the lower troposphere where loss processes are much more rapid. Conversely, as air with lower NO descends and replaces more polluted air, there is greater O3 production efficiency per molecule of NO in the boundary layer following convective transport. As a result, over 30 percent more ozone could be produced in the entire tropospheric column in the first 24 hours following convective transport of urban plumes.

Response of a hypersonic boundary layer to freestream pulse acoustic disturbance.

PubMed

Wang, Zhenqing; Tang, Xiaojun; Lv, Hongqing

2014-01-01

The response of hypersonic boundary layer over a blunt wedge to freestream pulse acoustic disturbance was investigated. The stability characteristics of boundary layer for freestream pulse wave and continuous wave were analyzed comparatively. Results show that freestream pulse disturbance changes the thermal conductivity characteristics of boundary layer. For pulse wave, the number of main disturbance clusters decreases and the frequency band narrows along streamwise. There are competition and disturbance energy transfer among different modes in boundary layer. The dominant mode of boundary layer has an inhibitory action on other modes. Under continuous wave, the disturbance modes are mainly distributed near fundamental and harmonic frequencies, while under pulse wave, the disturbance modes are widely distributed in different modes. For both pulse and continuous waves, most of disturbance modes slide into a lower-growth or decay state in downstream, which is tending towards stability. The amplitude of disturbance modes in boundary layer under continuous wave is considerably larger than pulse wave. The growth rate for the former is also considerably larger than the later the disturbance modes with higher growth are mainly distributed near fundamental and harmonic frequencies for the former, while the disturbance modes are widely distributed in different frequencies for the latter.

Response of a Hypersonic Boundary Layer to Freestream Pulse Acoustic Disturbance

PubMed Central

Wang, Zhenqing; Tang, Xiaojun; Lv, Hongqing

2014-01-01

The response of hypersonic boundary layer over a blunt wedge to freestream pulse acoustic disturbance was investigated. The stability characteristics of boundary layer for freestream pulse wave and continuous wave were analyzed comparatively. Results show that freestream pulse disturbance changes the thermal conductivity characteristics of boundary layer. For pulse wave, the number of main disturbance clusters decreases and the frequency band narrows along streamwise. There are competition and disturbance energy transfer among different modes in boundary layer. The dominant mode of boundary layer has an inhibitory action on other modes. Under continuous wave, the disturbance modes are mainly distributed near fundamental and harmonic frequencies, while under pulse wave, the disturbance modes are widely distributed in different modes. For both pulse and continuous waves, most of disturbance modes slide into a lower-growth or decay state in downstream, which is tending towards stability. The amplitude of disturbance modes in boundary layer under continuous wave is considerably larger than pulse wave. The growth rate for the former is also considerably larger than the later the disturbance modes with higher growth are mainly distributed near fundamental and harmonic frequencies for the former, while the disturbance modes are widely distributed in different frequencies for the latter. PMID:24737993

An examination of land use impacts of flooding induced by sea level rise

NASA Astrophysics Data System (ADS)

Song, Jie; Fu, Xinyu; Gu, Yue; Deng, Yujun; Peng, Zhong-Ren

2017-03-01

Coastal regions become unprecedentedly vulnerable to coastal hazards that are associated with sea level rise. The purpose of this paper is therefore to simulate prospective urban exposure to changing sea levels. This article first applied the cellular-automaton-based SLEUTH model (Project Gigalopolis, 2016) to calibrate historical urban dynamics in Bay County, Florida (USA) - a region that is greatly threatened by rising sea levels. This paper estimated five urban growth parameters by multiple-calibration procedures that used different Monte Carlo iterations to account for modeling uncertainties. It then employed the calibrated model to predict three scenarios of urban growth up to 2080 - historical trend, urban sprawl, and compact development. We also assessed land use impacts of four policies: no regulations; flood mitigation plans based on the whole study region and on those areas that are prone to experience growth; and the protection of conservational lands. This study lastly overlaid projected urban areas in 2030 and 2080 with 500-year flooding maps that were developed under 0, 0.2, and 0.9 m sea level rise. The calibration results that a substantial number of built-up regions extend from established coastal settlements. The predictions suggest that total flooded area of new urbanized regions in 2080 would be more than 25 times that under the flood mitigation policy, if the urbanization progresses with few policy interventions. The joint model generates new knowledge in the domain between land use modeling and sea level rise. It contributes to coastal spatial planning by helping develop hazard mitigation schemes and can be employed in other international communities that face combined pressure of urban growth and climate change.

Spatial and Temporal Mapping of the Evolution of the Miami-Fort Lauderdale-West Palm Beach Metropolitan Statistical Area (MSA)

NASA Astrophysics Data System (ADS)

Rochelo, Mark

Urbanization is a fundamental reality in the developed and developing countries around the world creating large concentrations of the population centering on cities and urban centers. Cities can offer many opportunities for those residing there, including infrastructure, health services, rescue services and more. The living space density of cities allows for the opportunity of more effective and environmentally friendly housing, transportation and resources. Cities play a vital role in generating economic production as entities by themselves and as a part of larger urban complex. The benefits can provide for extraordinary amount of people, but only if proper planning and consideration is undertaken. Global urbanization is a progressive evolution, unique in spatial location while consistent to an overall growth pattern and trend. Remotely sensing these patterns from the last forty years of space borne satellites to understand how urbanization has developed is important to understanding past growth as well as planning for the future. Imagery from the Landsat sensor program provides the temporal component, it was the first satellite launched in 1972, providing appropriate spatial resolution needed to cover a large metropolitan statistical area to monitor urban growth and change on a large scale. This research maps the urban spatial and population growth over the Miami - Fort Lauderdale - West Palm Beach Metropolitan Statistical Area (MSA) covering Miami-Dade, Broward, and Palm Beach counties in Southeast Florida from 1974 to 2010 using Landsat imagery. Supervised Maximum Likelihood classification was performed with a combination of spectral and textural training fields employed in ERDAS Image 2014 to classify the images into urban and non-urban areas. Dasymetric mapping of the classification results were combined with census tract data then created a coherent depiction of the Miami - Fort Lauderdale - West Palm Beach MSA. Static maps and animated files were created from the final datasets for enhanced visualizations and understanding of the MSA evolution from 60-meter resolution remotely sensed Landsat images. The simplified methodology will create a database for urban planning and population growth as well as future work in this area.

The Influence of Roof Material on Diurnal Urban Canyon Breathing

NASA Astrophysics Data System (ADS)

Abuhegazy, Mohamed; Yaghoobian, Neda

2017-11-01

Improvements in building energy use, air quality in urban canyons and in general urban microclimates require understanding the complex interaction between urban morphology, materials, climate, and inflow conditions. Review of the literature indicates that despite a long history of valuable urban microclimate studies, more comprehensive approaches are needed to address energy, and heat and flow transport in urban areas. In this study, a more comprehensive simulation of the diurnally varying street canyon flow and associated heat transport is numerically investigated, using Large-eddy Simulation (LES). We use computational modeling to examine the impact of diurnal variation of the heat fluxes from urban surfaces on the air flow and temperature distribution in street canyons with a focus on the role of roof materials and their temperature footprints. A detailed building energy model with a three-dimensional raster-type geometry provides urban surface heat fluxes as thermal boundary conditions for the LES to determine the key aero-thermodynamic factors that affect urban street ventilation.

Long-term urban carbon dioxide observations reveal spatial and temporal dynamics related to urban characteristics and growth

DOE PAGES

Mitchell, Logan E.; Lin, John C.; Bowling, David R.; ...

2018-03-05

Cities are concentrated areas of CO 2 emissions and have become the foci of policies for mitigation actions. However, atmospheric measurement networks suitable for evaluating urban emissions over time are scarce. Here we present a unique long-term (decadal) record of CO 2 mole fractions from five sites across Utah’s metropolitan Salt Lake Valley. We examine “excess” CO 2 above background conditions resulting from local emissions and meteorological conditions. We ascribe CO 2 trends to changes in emissions, since we did not find longterm trends in atmospheric mixing proxies. Three contrasting CO 2 trends emerged across urban types: negative trends atmore » a residentialindustrial site, positive trends at a site surrounded by rapid suburban growth, and relatively constant CO 2 over time at multiple sites in the established, residential, and commercial urban core. Analysis of populationwithin the atmospheric footprints of the different sites reveals approximately equal increases in population influencing the observed CO 2, implying a nonlinear relationshipwith CO 2 emissions: Population growth in rural areas that experienced suburban development was associated with increasing emissions while population growth in the developed urban core was associated with stable emissions. Four state-of-the-art global-scale emission inventories also have a nonlinear relationship with population density across the city; however, in contrast to our observations, they all have nearly constant emissions over time. Our results indicate that decadal scale changes in urban CO 2 emissions are detectable through monitoring networks and constitute a valuable approach to evaluate emission inventories and studies of urban carbon cycles.« less

Long-term urban carbon dioxide observations reveal spatial and temporal dynamics related to urban characteristics and growth

NASA Astrophysics Data System (ADS)

Mitchell, Logan E.; Lin, John C.; Bowling, David R.; Pataki, Diane E.; Strong, Courtenay; Schauer, Andrew J.; Bares, Ryan; Bush, Susan E.; Stephens, Britton B.; Mendoza, Daniel; Mallia, Derek; Holland, Lacey; Gurney, Kevin R.; Ehleringer, James R.

2018-03-01

Cities are concentrated areas of CO2 emissions and have become the foci of policies for mitigation actions. However, atmospheric measurement networks suitable for evaluating urban emissions over time are scarce. Here we present a unique long-term (decadal) record of CO2 mole fractions from five sites across Utah’s metropolitan Salt Lake Valley. We examine “excess” CO2 above background conditions resulting from local emissions and meteorological conditions. We ascribe CO2 trends to changes in emissions, since we did not find long-term trends in atmospheric mixing proxies. Three contrasting CO2 trends emerged across urban types: negative trends at a residential-industrial site, positive trends at a site surrounded by rapid suburban growth, and relatively constant CO2 over time at multiple sites in the established, residential, and commercial urban core. Analysis of population within the atmospheric footprints of the different sites reveals approximately equal increases in population influencing the observed CO2, implying a nonlinear relationship with CO2 emissions: Population growth in rural areas that experienced suburban development was associated with increasing emissions while population growth in the developed urban core was associated with stable emissions. Four state-of-the-art global-scale emission inventories also have a nonlinear relationship with population density across the city; however, in contrast to our observations, they all have nearly constant emissions over time. Our results indicate that decadal scale changes in urban CO2 emissions are detectable through monitoring networks and constitute a valuable approach to evaluate emission inventories and studies of urban carbon cycles.

Long-term urban carbon dioxide observations reveal spatial and temporal dynamics related to urban characteristics and growth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitchell, Logan E.; Lin, John C.; Bowling, David R.

Cities are concentrated areas of CO 2 emissions and have become the foci of policies for mitigation actions. However, atmospheric measurement networks suitable for evaluating urban emissions over time are scarce. Here we present a unique long-term (decadal) record of CO 2 mole fractions from five sites across Utah’s metropolitan Salt Lake Valley. We examine “excess” CO 2 above background conditions resulting from local emissions and meteorological conditions. We ascribe CO 2 trends to changes in emissions, since we did not find longterm trends in atmospheric mixing proxies. Three contrasting CO 2 trends emerged across urban types: negative trends atmore » a residentialindustrial site, positive trends at a site surrounded by rapid suburban growth, and relatively constant CO 2 over time at multiple sites in the established, residential, and commercial urban core. Analysis of populationwithin the atmospheric footprints of the different sites reveals approximately equal increases in population influencing the observed CO 2, implying a nonlinear relationshipwith CO 2 emissions: Population growth in rural areas that experienced suburban development was associated with increasing emissions while population growth in the developed urban core was associated with stable emissions. Four state-of-the-art global-scale emission inventories also have a nonlinear relationship with population density across the city; however, in contrast to our observations, they all have nearly constant emissions over time. Our results indicate that decadal scale changes in urban CO 2 emissions are detectable through monitoring networks and constitute a valuable approach to evaluate emission inventories and studies of urban carbon cycles.« less

Sustainability of population growth: a case study of urban settlements in Israel.

PubMed

Portnov, B A; Pearlmutter, D

1997-01-01

"One of the most sensitive criteria for gauging the degree of socio-economic prosperity of an urban settlement is the ability to sustain stable rates of population growth by attracting newcomers and retaining existing population. The present paper argues that after reaching a particular size (on the average, 20-30,000 residents), urban localities in Israel tend to experience substantial changes in components of their annual population growth. Starting with this inflection point, the growth of settlements gradually becomes less dependent on natural causes (birth and death rates) than on the ability to attract newcomers and retain current residents. On the basis of this conclusion, a strategy of ¿redirecting priorities' to developing the peripheral regions of the country is suggested." excerpt

Investigation of the flow inside an urban canopy immersed into an atmospheric boundary layer using laser Doppler anemometry

NASA Astrophysics Data System (ADS)

Herpin, Sophie; Perret, Laurent; Mathis, Romain; Tanguy, Christian; Lasserre, Jean-Jacques

2018-05-01

Laser Doppler anemometry (LDA) is used to investigate the flow inside an idealized urban canopy consisting of a staggered array of cubes with a 25% density immersed into an atmospheric boundary layer with a Reynolds number of δ ^+=32{,}300. The boundary layer thickness to cube height ratio (δ /h=22.7) is large enough to be representative of atmospheric surface layer in neutral conditions. The LDA measurements give access to pointwise time-resolved data at several positions inside the canopy (z=h/4, h/2, and h). Synchronized hot-wire measurements above the canopy (inertial region and roughness sublayer) are also realized to get access to interactions between the different flow regions. The wall-normal mean velocity profile and Reynolds stresses show a good agreement with available data in the literature, although some differences are observed on the standard deviation of the spanwise component. A detailed spectral and integral time scale analysis inside the canopy is then carried out. No clear footprint of a periodic vortex shedding on the sides of the cubes could be identified on the power spectra, owing to the multiple cube-to-cube interactions occuring within a canopy with a building density in the wake interference regime. Results also suggest that interactions between the most energetics scales of the boundary layer and those related to the cube canopy take place, leading to a broadening of the energy peak in the spectra within the canopy. This is confirmed by the analysis of coherence results between the flow inside and above the canopy. It is shown that linear interactions mechanisms are significant, but reduced compared to smooth-wall boundary-layer flow. To our knowledge, this is the first time such results are shown on the dynamics of the flow inside an urban canopy.

Anthropogenic Moisture production and its effect on boundary-layer circulations over New York City

Treesearch

Robert D. Bornstein; Yam-Tong Tam

1977-01-01

A heat and moisture excess over New York City is shown to exist by the analysis of helicopter soundings of temperature and wet-bulb depression. The magnitude of the temporal and spatial distribution of anthropogenic moisture emissions in New York City were estimated from fuel-usage data. The URBMET urban boundary-layer model was used to evaluate the effects on the...

Crossing Boundaries: Exploring Black Middle and Upper Class Preservice Teachers' Perceptions of Teaching and Learning in High Poverty Urban Schools

ERIC Educational Resources Information Center

Lewis, Andrea D.

2012-01-01

The intent of this study was to explore the perceptions of Black middle and upper class preservice teachers as they relate to teaching and learning in high poverty urban schools. Participants included 11 senior early childhood education preservice teachers at a historically Black college in the southeast region of the United States. The study was…

Goertler instability in compressible boundary layers along curved surfaces with suction and cooling

NASA Technical Reports Server (NTRS)

El-Hady, N.; Verma, A. K.

1982-01-01

The Goertler instability of the laminar compressible boundary layer flows along concave surfaces is investigated. The linearized disturbance equations for the three-dimensional, counter-rotating streamwise vortices in two-dimensional boundary layers are presented in an orthogonal curvilinear coordinate. The basic approximation of the disturbance equations, that includes the effect of the growth of the boundary layer, is considered and solved numerically. The effect of compressibility on critical stability limits, growth rates, and amplitude ratios of the vortices is evaluated for a range of Mach numbers for 0 to 5. The effect of wall cooling and suction of the boundary layer on the development of Goertler vortices is investigated for different Mach numbers.

Remote sensing of impervious surface growth: A framework for quantifying urban expansion and re-densification mechanisms

NASA Astrophysics Data System (ADS)

Shahtahmassebi, Amir Reza; Song, Jie; Zheng, Qing; Blackburn, George Alan; Wang, Ke; Huang, Ling Yan; Pan, Yi; Moore, Nathan; Shahtahmassebi, Golnaz; Sadrabadi Haghighi, Reza; Deng, Jing Song

2016-04-01

A substantial body of literature has accumulated on the topic of using remotely sensed data to map impervious surfaces which are widely recognized as an important indicator of urbanization. However, the remote sensing of impervious surface growth has not been successfully addressed. This study proposes a new framework for deriving and summarizing urban expansion and re-densification using time series of impervious surface fractions (ISFs) derived from remotely sensed imagery. This approach integrates multiple endmember spectral mixture analysis (MESMA), analysis of regression residuals, spatial statistics (Getis_Ord) and urban growth theories; hence, the framework is abbreviated as MRGU. The performance of MRGU was compared with commonly used change detection techniques in order to evaluate the effectiveness of the approach. The results suggested that the ISF regression residuals were optimal for detecting impervious surface changes while Getis_Ord was effective for mapping hotspot regions in the regression residuals image. Moreover, the MRGU outputs agreed with the mechanisms proposed in several existing urban growth theories, but importantly the outputs enable the refinement of such models by explicitly accounting for the spatial distribution of both expansion and re-densification mechanisms. Based on Landsat data, the MRGU is somewhat restricted in its ability to measure re-densification in the urban core but this may be improved through the use of higher spatial resolution satellite imagery. The paper ends with an assessment of the present gaps in remote sensing of impervious surface growth and suggests some solutions. The application of impervious surface fractions in urban change detection is a stimulating new research idea which is driving future research with new models and algorithms.

Improving the capability of an integrated CA-Markov model to simulate spatio-temporal urban growth trends using an Analytical Hierarchy Process and Frequency Ratio

NASA Astrophysics Data System (ADS)

Aburas, Maher Milad; Ho, Yuek Ming; Ramli, Mohammad Firuz; Ash'aari, Zulfa Hanan

2017-07-01

The creation of an accurate simulation of future urban growth is considered one of the most important challenges in urban studies that involve spatial modeling. The purpose of this study is to improve the simulation capability of an integrated CA-Markov Chain (CA-MC) model using CA-MC based on the Analytical Hierarchy Process (AHP) and CA-MC based on Frequency Ratio (FR), both applied in Seremban, Malaysia, as well as to compare the performance and accuracy between the traditional and hybrid models. Various physical, socio-economic, utilities, and environmental criteria were used as predictors, including elevation, slope, soil texture, population density, distance to commercial area, distance to educational area, distance to residential area, distance to industrial area, distance to roads, distance to highway, distance to railway, distance to power line, distance to stream, and land cover. For calibration, three models were applied to simulate urban growth trends in 2010; the actual data of 2010 were used for model validation utilizing the Relative Operating Characteristic (ROC) and Kappa coefficient methods Consequently, future urban growth maps of 2020 and 2030 were created. The validation findings confirm that the integration of the CA-MC model with the FR model and employing the significant driving force of urban growth in the simulation process have resulted in the improved simulation capability of the CA-MC model. This study has provided a novel approach for improving the CA-MC model based on FR, which will provide powerful support to planners and decision-makers in the development of future sustainable urban planning.

Effect of real-time boundary wind conditions on the air flow and pollutant dispersion in an urban street canyon—Large eddy simulations

NASA Astrophysics Data System (ADS)

Zhang, Yun-Wei; Gu, Zhao-Lin; Cheng, Yan; Lee, Shun-Cheng

2011-07-01

Air flow and pollutant dispersion characteristics in an urban street canyon are studied under the real-time boundary conditions. A new scheme for realizing real-time boundary conditions in simulations is proposed, to keep the upper boundary wind conditions consistent with the measured time series of wind data. The air flow structure and its evolution under real-time boundary wind conditions are simulated by using this new scheme. The induced effect of time series of ambient wind conditions on the flow structures inside and above the street canyon is investigated. The flow shows an obvious intermittent feature in the street canyon and the flapping of the shear layer forms near the roof layer under real-time wind conditions, resulting in the expansion or compression of the air mass in the canyon. The simulations of pollutant dispersion show that the pollutants inside and above the street canyon are transported by different dispersion mechanisms, relying on the time series of air flow structures. Large scale air movements in the processes of the air mass expansion or compression in the canyon exhibit obvious effects on pollutant dispersion. The simulations of pollutant dispersion also show that the transport of pollutants from the canyon to the upper air flow is dominated by the shear layer turbulence near the roof level and the expansion or compression of the air mass in street canyon under real-time boundary wind conditions. Especially, the expansion of the air mass, which features the large scale air movement of the air mass, makes more contribution to the pollutant dispersion in this study. Comparisons of simulated results under different boundary wind conditions indicate that real-time boundary wind conditions produces better condition for pollutant dispersion than the artificially-designed steady boundary wind conditions.

Mixing Heights and Three-Dimensional Ozone Structure Observed by Airborne Lidar During the 2006 Texas Air Quality Study

NASA Astrophysics Data System (ADS)

Hardesty, R. M.; Senff, C. J.; Alvarez, R. J.; Banta, R. M.; Sandberg, S. P.; Weickmann, A. M.; Darby, L. S.

2007-12-01

A new all solid state ozone lidar was deployed on a NOAA Twin Otter to study boundary layer ozone and aerosol, mostly around Houston, during the 2006 Texas Air Quality Study. The new instrument transmits high pulse-rate, low pulse-energy light at 3 wavelengths in the ultraviolet to obtain ozone profiles with 500 m horizontal resolution and 90 m vertical resolution. During the Texas field study, 20 research flights resulted in nearly 70 hours of ozone measurements during the period from August 1 to September 15. Science objectives included characterization of background ozone levels over rural areas near Houston and Dallas and variability and structure of the boundary layer over different surface types, including urban, wooded, and agricultural land surface areas as well as over Galveston Bay and the Gulf of Mexico. A histogram of all boundary layer ozone concentration measurements showed a bimodal distribution with modes at 45 ppb and 70 ppb. The lower mode correlated with southerly flow, when relatively clean air was transported onshore into the Houston area. Segmenting the observations during southerly flow by region, including the Gulf of Mexico, land within about 55 km from the coast, and further inland indicated that background levels increased by about 10 ppb as air was transported onshore. During the latter part of the experiment, as more pollution was imported into the Houston region, background levels rose to nearly 80 ppb in regions N of Houston. Two flights aimed at observing import of ozone into Texas from the east showed that ozone concentrations increased and boundary layer depths deepened upwind of Houston between September 4 and September 8. Background levels rose by more than 10 ppb over this period. In addition to ozone measurements, we also estimated boundary layer height based on maximum gradient in observed backscatter. The technique worked well when the layer topped by the strongest gradient extends down to the surface. Investigation of the correlation between ozone levels and mixing layer heights both within and external to the Houston urban plume showed a variety of relationships, depending on, e.g., wind direction and occurrence of a bay/gulf breeze. On a day-to-day basis, higher ozone levels were weakly correlated with deeper mixing levels - this was likely due to advection of the urban heat island downwind with the high-ozone urban plume.

Sound propagation in street canyons: comparison between diffusely and geometrically reflecting boundaries

PubMed

Kang

2000-03-01

This paper systematically compares the sound fields in street canyons with diffusely and geometrically reflecting boundaries. For diffuse boundaries, a radiosity-based theoretical/computer model has been developed. For geometrical boundaries, the image source method has been used. Computations using the models show that there are considerable differences between the sound fields resulting from the two kinds of boundaries. By replacing diffuse boundaries with geometrical boundaries, the sound attenuation along the length becomes significantly less; the RT30 is considerably longer; and the extra attenuation caused by air or vegetation absorption is reduced. There are also some similarities between the sound fields under the two boundary conditions. For example, in both cases the sound attenuation along the length with a given amount of absorption is the highest if the absorbers are arranged on one boundary and the lowest if they are evenly distributed on all boundaries. Overall, the results suggest that, from the viewpoint of urban noise reduction, it is better to design the street boundaries as diffusely reflective rather than acoustically smooth.

Urban Sprawl, Smart Growth, and Deliberative Democracy

PubMed Central

2010-01-01

Urban sprawl is an increasingly common feature of the built environment in the United States and other industrialized nations. Although there is considerable evidence that urban sprawl has adverse affects on public health and the environment, policy frameworks designed to combat sprawl—such as smart growth—have proven to be controversial, making implementation difficult. Smart growth has generated considerable controversy because stakeholders affected by urban planning policies have conflicting interests and divergent moral and political viewpoints. In some of these situations, deliberative democracy—an approach to resolving controversial public-policy questions that emphasizes open, deliberative debate among the affected parties as an alternative to voting—would be a fair and effective way to resolve urban-planning issues. PMID:20724685

Urban Area Monitoring using MODIS Time Series Data

NASA Astrophysics Data System (ADS)

Devadiga, S.; Sarkar, S.; Mauoka, E.

2015-12-01

Growing urban sprawl and its impact on global climate due to urban heat island effects has been an active area of research over the recent years. This is especially significant in light of rapid urbanization that is happening in some of the first developing nations across the globe. But so far study of urban area growth has been largely restricted to local and regional scales, using high to medium resolution satellite observations, taken at distinct time periods. In this presentation we propose a new approach to detect and monitor urban area expansion using long time series of MODIS data. This work characterizes data points using a vector of several annual metrics computed from the MODIS 8-day and 16-day composite L3 data products, at 250M resolution and over several years and then uses a vector angle mapping classifier to detect and segment the urban area. The classifier is trained using a set of training points obtained from a reference vector point and polygon pre-filtered using the MODIS VI product. This work gains additional significance, given that, despite unprecedented urban growth since 2000, the area covered by the urban class in the MODIS Global Land Cover (MCD12Q1, MCDLCHKM and MCDLC1KM) product hasn't changed since the launch of Terra and Aqua. The proposed approach was applied to delineate the urban area around several cities in Asia known to have maximum growth in the last 15 years. Results were verified using high resolution Landsat data.

Austenite grain growth simulation considering the solute-drag effect and pinning effect

PubMed Central

Fujiyama, Naoto; Nishibata, Toshinobu; Seki, Akira; Hirata, Hiroyuki; Kojima, Kazuhiro; Ogawa, Kazuhiro

2017-01-01

Abstract The pinning effect is useful for restraining austenite grain growth in low alloy steel and improving heat affected zone toughness in welded joints. We propose a new calculation model for predicting austenite grain growth behavior. The model is mainly comprised of two theories: the solute-drag effect and the pinning effect of TiN precipitates. The calculation of the solute-drag effect is based on the hypothesis that the width of each austenite grain boundary is constant and that the element content maintains equilibrium segregation at the austenite grain boundaries. We used Hillert’s law under the assumption that the austenite grain boundary phase is a liquid so that we could estimate the equilibrium solute concentration at the austenite grain boundaries. The equilibrium solute concentration was calculated using the Thermo-Calc software. Pinning effect was estimated by Nishizawa’s equation. The calculated austenite grain growth at 1473–1673 K showed excellent correspondence with the experimental results. PMID:28179962

Geosimulation of urban growth and demographic decline in the Ruhr: a case study for 2025 using the artificial intelligence of cells and agents

NASA Astrophysics Data System (ADS)

Rienow, Andreas; Stenger, Dirk

2014-07-01

The Ruhr is an "old acquaintance" in the discourse of urban decline in old industrialized cities. The agglomeration has to struggle with archetypical problems of former monofunctional manufacturing cities. Surprisingly, the image of a shrinking city has to be refuted if you shift the focus from socioeconomic wealth to its morphological extension. Thus, it is the objective of this study to meet the challenge of modeling urban sprawl and demographic decline by combining two artificial intelligent solutions: The popular urban cellular automaton SLEUTH simulates urban growth using four simple but effective growth rules. In order to improve its performance, SLEUTH has been modified among others by combining it with a robust probability map based on support vector machines. Additionally, a complex multi-agent system is developed to simulate residential mobility in a shrinking city agglomeration: residential mobility and the housing market of shrinking city systems focuses on the dynamic of interregional housing markets implying the development of potential dwelling areas. The multi-agent system comprises the simulation of population patterns, housing prices, and housing demand in shrinking city agglomerations. Both models are calibrated and validated regarding their localization and quantification performance. Subsequently, the urban landscape configuration and composition of the Ruhr 2025 are simulated. A simple spatial join is used to combine the results serving as valuable inputs for future regional planning in the context of multifarious demographic change and preceding urban growth.

Long-term monitoring of Sacramento Shade program trees: tree survival, growth and energy-saving performance

Treesearch

Yekang Ko; Jun-Hak Lee; E. Gregory McPherson; Lara A. Roman

2015-01-01

Long-term survival and growth of urban forests are critical to achieve the targeted benefits of urban tree planting programs, such as building energy savings from tree shade. However, little is known about how trees perform in the long-term, especially in residential areas. Given this gap in the literature, we monitored 22-years of post-planting survival, growth, and...

Tracking urban activity growth globally with big location data

PubMed Central

Daggitt, Matthew L.; Noulas, Anastasios; Shaw, Blake; Mascolo, Cecilia

2016-01-01

In recent decades, the world has experienced rates of urban growth unparalleled in any other period of history and this growth is shaping the environment in which an increasing proportion of us live. In this paper, we use a longitudinal dataset from Foursquare, a location-based social network, to analyse urban growth across 100 major cities worldwide. Initially, we explore how urban growth differs in cities across the world. We show that there exists a strong spatial correlation, with nearby pairs of cities more likely to share similar growth profiles than remote pairs of cities. Subsequently, we investigate how growth varies inside cities and demonstrate that, given the existing local density of places, higher-than-expected growth is highly localized while lower-than-expected growth is more diffuse. Finally, we attempt to use the dataset to characterize competition between new and existing venues. By defining a measure based on the change in throughput of a venue before and after the opening of a new nearby venue, we demonstrate which venue types have a positive effect on venues of the same type and which have a negative effect. For example, our analysis confirms the hypothesis that there is large degree of competition between bookstores, in the sense that existing bookstores normally experience a notable drop in footfall after a new bookstore opens nearby. Other place types, such as museums, are shown to have a cooperative effect and their presence fosters higher traffic volumes to nearby places of the same type. PMID:27152210

Tracking urban activity growth globally with big location data.

PubMed

Daggitt, Matthew L; Noulas, Anastasios; Shaw, Blake; Mascolo, Cecilia

2016-04-01

In recent decades, the world has experienced rates of urban growth unparalleled in any other period of history and this growth is shaping the environment in which an increasing proportion of us live. In this paper, we use a longitudinal dataset from Foursquare, a location-based social network, to analyse urban growth across 100 major cities worldwide. Initially, we explore how urban growth differs in cities across the world. We show that there exists a strong spatial correlation, with nearby pairs of cities more likely to share similar growth profiles than remote pairs of cities. Subsequently, we investigate how growth varies inside cities and demonstrate that, given the existing local density of places, higher-than-expected growth is highly localized while lower-than-expected growth is more diffuse. Finally, we attempt to use the dataset to characterize competition between new and existing venues. By defining a measure based on the change in throughput of a venue before and after the opening of a new nearby venue, we demonstrate which venue types have a positive effect on venues of the same type and which have a negative effect. For example, our analysis confirms the hypothesis that there is large degree of competition between bookstores, in the sense that existing bookstores normally experience a notable drop in footfall after a new bookstore opens nearby. Other place types, such as museums, are shown to have a cooperative effect and their presence fosters higher traffic volumes to nearby places of the same type.

Urban Expansion: a Geo-Spatial Approach for Temporal Monitoring of Loss of Agricultural Land

NASA Astrophysics Data System (ADS)

Sumari, N. S.; Shao, Z.; Huang, M.; Sanga, C. A.; Van Genderen, J. L.

2017-09-01

This paper presents some preliminary results from research on monitoring the urban growth of Shenzhen in China. Agriculture is still the pillar of national economies in many countries including China. Thus, agriculture contributes to population growth. Population growth follows either exponential or logistic growth models. These models can be examined using a time-series of geospatial data, mainly historical earth observation imagery from satellites such as LANDSAT. Such multitemporal data may provide insights into settlement analysis as well as on population dynamics and hence, quantify the loss of agricultural land. In this study, LANDSAT data of ten dates, at approximately five yearly intervals from 1977 to 2017 were used. The remote sensing techniques used for analysis of data for 40 years were image selection, then followed by geometric and radiometric corrections and mosaicking. Also, classification, remote sensing image fusion, and change detection methods were used. This research extracted the information on the amount, direction, and speed of urbanization, and hence, the number of hectares of agricultural land lost due to urban expansion. Several specific elements were used in the descriptive model of landscape changes and population dynamics of the city of Shenzhen in China. These elements are: i) quantify the urban changes, from a small town (37.000 people in the early 1970's) to the megalopolis of around 20 million habitants today. ii) Examining the rate of urban extension on the loss of agricultural landscape and population growth. iii) The loss of food production was analysed against the economic growth in the region. iv) The aspects of loss of agricultural land, area of built-up urban land, and increase in population are studied quantitatively, by the temporal analysis of earth observation geospatial data. The experimental results from this study show that the proposed method is effective in determining loss of agricultural land in any city due to urbanization. It can be used by town planner and other stakeholders such as land surveyors and agriculture experts to mitigate the mushrooming of unplanned settlements in many town / villages and loss of land for agriculture which might cause problems in food security.

Introducing Overlapping Grain Boundaries in Chemical Vapor Deposited Hexagonal Boron Nitride Monolayer Films

PubMed Central

2017-01-01

We demonstrate the growth of overlapping grain boundaries in continuous, polycrystalline hexagonal boron nitride (h-BN) monolayer films via scalable catalytic chemical vapor deposition. Unlike the commonly reported atomically stitched grain boundaries, these overlapping grain boundaries do not consist of defect lines within the monolayer films but are composed of self-sealing bilayer regions of limited width. We characterize this overlapping h-BN grain boundary structure in detail by complementary (scanning) transmission electron microscopy techniques and propose a catalytic growth mechanism linked to the subsurface/bulk of the process catalyst and its boron and nitrogen solubilities. Our data suggest that the overlapping grain boundaries are comparatively resilient against deleterious pinhole formation associated with grain boundary defect lines and thus may reduce detrimental breakdown effects when polycrystalline h-BN monolayer films are used as ultrathin dielectrics, barrier layers, or separation membranes. PMID:28410557

A Model of Controlled Growth

NASA Astrophysics Data System (ADS)

Bressan, Alberto; Lewicka, Marta

2018-03-01

We consider a free boundary problem for a system of PDEs, modeling the growth of a biological tissue. A morphogen, controlling volume growth, is produced by specific cells and then diffused and absorbed throughout the domain. The geometric shape of the growing tissue is determined by the instantaneous minimization of an elastic deformation energy, subject to a constraint on the volumetric growth. For an initial domain with C}^{2,α boundary, our main result establishes the local existence and uniqueness of a classical solution, up to a rigid motion.

Unraveling irradiation induced grain growth with in situ transmission electron microscopy and coordinated modeling

DOE PAGES

Bufford, D. C.; Abdeljawad, F. F.; Foiles, S. M.; ...

2015-11-09

Here, nanostructuring has been proposed as a method to enhance radiation tolerance, but many metallic systems are rejected due to significant concerns regarding long term grain boundary and interface stability. This work utilized recent advancements in transmission electron microscopy (TEM) to quantitatively characterize the grain size, texture, and individual grain boundary character in a nanocrystalline gold model system before and after in situ TEM ion irradiation with 10 MeV Si. The initial experimental measurements were fed into a mesoscale phase field model, which incorporates the role of irradiation-induced thermal events on boundary properties, to directly compare the observed and simulatedmore » grain growth with varied parameters. The observed microstructure evolution deviated subtly from previously reported normal grain growth in which some boundaries remained essentially static. In broader terms, the combined experimental and modeling techniques presented herein provide future avenues to enhance quantification and prediction of the thermal, mechanical, or radiation stability of grain boundaries in nanostructured crystalline systems.« less

Modelling regional climate change and urban planning scenarios and their impacts on the urban environment in two cities with WRF-ACASA

NASA Astrophysics Data System (ADS)

Falk, M.; Pyles, R. D.; Marras, S.; Spano, D.; Paw U, K. T.

2011-12-01

The number of urban metabolism studies has increased in recent years, due to the important impact that energy, water and carbon exchange over urban areas have on climate change. Urban modeling is therefore crucial in the future design and management of cities. This study presents the ACASA model coupled to the Weather Research and Forecasting (WRF-ARW) mesoscale model to simulate urban fluxes at a horizontal resolution of 200 meters for urban areas of roughly 100 km^2. As part of the European Project "BRIDGE", these regional simulations were used in combination with remotely sensed data to provide constraints on the land surface types and the exchange of carbon and energy fluxes from urban centers. Surface-atmosphere exchanges of mass and energy were simulated using the Advanced Canopy Atmosphere Soil Algorithm (ACASA). ACASA is a multi-layer high-order closure model, recently modified to work over natural, agricultural as well as urban environments. In particular, improvements were made to account for the anthropogenic contribution to heat and carbon production. For two cities four climate change and four urban planning scenarios were simulated: The climate change scenarios include a base scenario (Sc0: 2008 Commit in IPCC), a medium emission scenario (Sc1: IPCC A2), a worst case emission scenario (Sce2: IPCC A1F1) and finally a best case emission scenario (Sce3: IPCC B1). The urban planning scenarios include different development scenarios such as smart growth. The two cities are a high latitude city, Helsinki (Finland) and an historic city, Florence (Italy). Helsinki is characterized by recent, rapid urbanization that requires a substantial amount of energy for heating, while Florence is representative of cities in lower latitudes, with substantial cultural heritage and a comparatively constant architectural footprint over time. In general, simulated fluxes matched the point observations well and showed consistent improvement in the energy partitioning over urban regions. We present comparisons of observed (EC) tower flux observations from the Florence (Ximeniano) site for 1-9 April, 2008 with results from two sets of high-resolution simulations: the first using dynamically-downscaled input/boundary conditions (Model-0) and the second using fully nested WRF-ACASA (Model-1). In each simulation the model physics are the same; only the WRF domain configuration differs. Preliminary results (Figure 1) indicate a degree of parity (and a slight statistical improvement), in the performances of Model-1 vs. that of Model-0 with respect to observed. Figure 1 (below) shows air temperature values from observed and both model estimates. Additional results indicate that care must be taken to configure the WRF domain, as performance appears to be sensitive to model configuration.

Turbulence and pollutant transport in urban street canyons under stable stratification: a large-eddy simulation

NASA Astrophysics Data System (ADS)

Li, X.

2014-12-01

Thermal stratification of the atmospheric surface layer has strong impact on the land-atmosphere exchange of turbulent, heat, and pollutant fluxes. Few studies have been carried out for the interaction of the weakly to moderately stable stratified atmosphere and the urban canopy. This study performs a large-eddy simulation of a modeled street canyon within a weakly to moderately stable atmosphere boundary layer. To better resolve the smaller eddy size resulted from the stable stratification, a higher spatial and temporal resolution is used. The detailed flow structure and turbulence inside the street canyon are analyzed. The relationship of pollutant dispersion and Richardson number of the atmosphere is investigated. Differences between these characteristics and those under neutral and unstable atmosphere boundary layer are emphasized.

[A national survey on physical growth and development of children under seven years of age in nine cities of China in 2015].

PubMed

2018-03-02

Objective: To investigate and analyze the status of physical growth and its change in children under 7 years of age in 9 cities of China, and to provide scientific data for renewing and developing the new growth reference of Chinese children. Methods: Data of healthy children under 7 years of age were collected by stratified cluster sampling method in Beijing, Harbin, Xi'an, Shanghai, Nanjing, Wuhan, Guangzhou, Fuzhou and Kunming during the period from June to November in 2015. They were divided into 22 age groups. The sample size of boys or girls, urban or suburban was 150-200 in each age group in each city, and the total sample size in the 9 cities was 161 774. Weight, length/height, head circumference, sitting height, chest circumference and waist circumference were measured by the trained investigators using standard methods. There were strict quality control measures during investigation process. The t test was used to compare the difference of physical growth between two groups and one-way ANOVA was used to compare the difference of physical growth among three groups. Results: (1) The level of physical growth of children under 7 years were different between boys and girls, urban and suburban, as well as different regions of China in 2015. The urban-suburban difference was more significant in children older than 8 months, that is, the weight and height of urban children were greater than those of suburban children (0.01-0.48 kg and 0.1-1.1 cm respectively). (2) Weight and height of children in the 9 cities, whether urban or suburban areas, had been greater than WHO growth standards, for example, the Z-scores of height values of urban and suburban children were 0.43 ±0.99 ( t= 130.551, P< 0.05) and 0.30 ±1.01 ( t= 87.407, P< 0.05) higher than the WHO standards. (3) The physical growth of children in the 9 cities was improved in varying degrees during the past 10 years. For example, the changes of weight and height in urban children under 3 years were not significant, while there was significant improvement among children older than 3 years and the increasing trend became apparent along with the increasing of age (0.05-1.18 kg in weight and 0.5-1.8 cm in height). The urban-suburban difference of physical growth in each age group of boys and girls narrowed significantly during the past 10 years, which was clearly shown from the narrowing urban-suburban differences of weight and height in boys aged 5.5-<6.0 years (1.58 kg in 2005 vs . 0.44 kg in 2015 and 2.8 cm in 2005 vs . 0.9 cm in 2015) . (4) From the increments of each decade during 1975-2015, a rapid increments of physical growth during 1975-2005 were found, while the increments after 2005 had slowed comparing with that of the previous period in urban areas, for example, the increments of height in boys aged 5.5-<6.0 years were 1.5, 2.1, 2.7, 0.7 cm respectively in the 1(st), 2(nd), 3(rd) and 4(th) decade (1975-1985, 1985-1995, 1995-2005, 2005-2015) . In suburban areas, the trends of the previous 3 decades were similar with that of urban children, while the increments of the 4(th) decade were still bigger though they were slightly smaller than those of the 3(rd) decade, for example, the increments of height in boys aged 5.5-<6.0 years were 2.4, 2.3, 3.2, 2.6 cm in the 1(st), 2(nd), 3(rd) and 4(th) decade respectively. Conclusions: Physical growth of children under 7 years of age showed a slow positive secular trend during the last decade after a rapid increase. The increments of suburban children's physical growth were greater than those of urban children. The physical growth of children under 7 years in 9 Chinese cities exceeded the WHO standards.

Transient Growth Analysis of Compressible Boundary Layers with Parabolized Stability Equations

NASA Technical Reports Server (NTRS)

Paredes, Pedro; Choudhari, Meelan M.; Li, Fei; Chang, Chau-Lyan

2016-01-01

The linear form of parabolized linear stability equations (PSE) is used in a variational approach to extend the previous body of results for the optimal, non-modal disturbance growth in boundary layer flows. This methodology includes the non-parallel effects associated with the spatial development of boundary layer flows. As noted in literature, the optimal initial disturbances correspond to steady counter-rotating stream-wise vortices, which subsequently lead to the formation of stream-wise-elongated structures, i.e., streaks, via a lift-up effect. The parameter space for optimal growth is extended to the hypersonic Mach number regime without any high enthalpy effects, and the effect of wall cooling is studied with particular emphasis on the role of the initial disturbance location and the value of the span-wise wavenumber that leads to the maximum energy growth up to a specified location. Unlike previous predictions that used a basic state obtained from a self-similar solution to the boundary layer equations, mean flow solutions based on the full Navier-Stokes (NS) equations are used in select cases to help account for the viscous-inviscid interaction near the leading edge of the plate and also for the weak shock wave emanating from that region. These differences in the base flow lead to an increasing reduction with Mach number in the magnitude of optimal growth relative to the predictions based on self-similar mean-flow approximation. Finally, the maximum optimal energy gain for the favorable pressure gradient boundary layer near a planar stagnation point is found to be substantially weaker than that in a zero pressure gradient Blasius boundary layer.

Grain orientations and grain boundaries in tungsten nonotendril fuzz grown under divertor-like conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parish, Chad M.; Wang, Kun; Doerner, Russel P.

2016-09-19

We grew nanotendril “fuzz” on tungsten via plasma exposure and performed transmission Kikuchi diffraction (tKD) in scanning electron microscopy of isolated nanotendrils. 900 °C, 10 23 He/m 2sec, 4 × 10 26 He/m 2 exposure of tungsten produced a deep and fully developed nanotendril mat. tKD of isolated nanotendrils indicated that there was no preferred crystallographic direction oriented along the long axes of the tendrils, and the grain boundary character showed slightly preferential orientations. In conclusion, tendril growth is sufficiently non-equilibrium to prevent any preference of growth direction to manifest measurably, and that new high-angle boundaries (with new grains andmore » grain-growth axes) nucleate randomly along the tendrils during growth.« less

An analysis of urban thermal characteristics and associated land cover in Tampa Bay and Las Vegas using Landsat satellite data

USGS Publications Warehouse

Xian, George; Crane, Mike

2006-01-01

Remote sensing data from both Landsat 5 and Landsat 7 systems were utilized to assess urban area thermal characteristics in Tampa Bay watershed of west-central Florida, and the Las Vegas valley of southern Nevada. To quantitatively determine urban land use extents and development densities, sub-pixel impervious surface areas were mapped for both areas. The urban–rural boundaries and urban development densities were defined by selecting certain imperviousness threshold values and Landsat thermal bands were used to investigate urban surface thermal patterns. Analysis results suggest that urban surface thermal characteristics and patterns can be identified through qualitatively based urban land use and development density data. Results show the urban area of the Tampa Bay watershed has a daytime heating effect (heat-source), whereas the urban surface in Las Vegas has a daytime cooling effect (heat-sink). These thermal effects strongly correlated with urban development densities where higher percent imperviousness is usually associated with higher surface temperature. Using vegetation canopy coverage information, the spatial and temporal distributions of urban impervious surface and associated thermal characteristics are demonstrated to be very useful sources in quantifying urban land use, development intensity, and urban thermal patterns.

Model of Environmental Development of the Urbanized Areas: Accounting of Ecological and other Factors

NASA Astrophysics Data System (ADS)

Abanina, E. N.; Pandakov, K. G.; Agapov, D. A.; Sorokina, Yu V.; Vasiliev, E. H.

2017-05-01

Modern cities and towns are often characterized by poor administration, which could be the reason of environmental degradation, the poverty growth, decline in economic growth and social isolation. In these circumstances it is really important to conduct fresh researches forming new ways of sustainable development of administrative districts. This development of the urban areas depends on many interdependent factors: ecological, economic, social. In this article we show some theoretical aspects of forming a model of environmental progress of the urbanized areas. We submit some model containing four levels including natural resources capacities of the territory, its social features, economic growth and human impact. The author describes the interrelations of elements of the model. In this article the program of environmental development of a city is offered and it could be used in any urban area.

Land Use and Land Cover Changes and Urban Sprawl in Riyadh, Saudi Arabia: AN Analysis Using Multi-Temporal Landsat Data and SHANNON'S Entropy Index

NASA Astrophysics Data System (ADS)

Rahman, M. T.

2016-06-01

The city of Riyadh, Saudi Arabia has experienced rapid population growth and urban expansion over the past several decades. Due to such growth, the capital city faces many short and long-term social and environmental consequences. In order to monitor and mitigate some of these consequences, it is essential to examine the past changes and historical growth of the city. It is also essential to measure its urban sprawl over the past few decades. The objective of this study is to fulfil these goals. It does so by first examining the historical growth of the city of Riyadh. To do so, Landsat data over the past two and half decades are classified using a combination of supervised and unsupervised classification techniques. Based on the classification results, the study then uses Shannon's Entropy to measure the urban sprawl in the city. The results show that from 1990-2009, the urban built-up area of the city has increased by 90% in the western, south-eastern, and northern parts. The Shannon's entropy values show that the city is dispersing towards the outskirts of the city. The results from this study will assist city planners and government officials to plan, reduce, and perhaps mitigate some of the social and environmental consequences and enable the growth of the city in a sustainable manner in the near future.

Empirical Research on Decoupling Relationship between Energy-Related Carbon Emission and Economic Growth in Guangdong Province Based on Extended Kaya Identity

PubMed Central

Wang, Wenxiu; Huang, Ningsheng; Zhao, Daiqing

2014-01-01

The decoupling elasticity decomposition quantitative model of energy-related carbon emission in Guangdong is established based on the extended Kaya identity and Tapio decoupling model for the first time, to explore the decoupling relationship and its internal mechanism between energy-related carbon emission and economic growth in Guangdong. Main results are as follows. (1) Total production energy-related carbon emissions in Guangdong increase from 4128 × 104 tC in 1995 to 14396 × 104 tC in 2011. Decoupling elasticity values of energy-related carbon emission and economic growth increase from 0.53 in 1996 to 0.85 in 2011, and its decoupling state turns from weak decoupling in 1996–2004 to expansive coupling in 2005–2011. (2) Land economic output and energy intensity are the first inhibiting factor and the first promoting factor to energy-related carbon emission decoupling from economic growth, respectively. The development speeds of land urbanization and population urbanization, especially land urbanization, play decisive roles in the change of total decoupling elasticity values. (3) Guangdong can realize decoupling of energy-related carbon emission from economic growth effectively by adjusting the energy mix and industrial structure, coordinating the development speed of land urbanization and population urbanization effectively, and strengthening the construction of carbon sink. PMID:24782666

Empirical research on decoupling relationship between energy-related carbon emission and economic growth in Guangdong province based on extended Kaya identity.

PubMed

Wang, Wenxiu; Kuang, Yaoqiu; Huang, Ningsheng; Zhao, Daiqing

2014-01-01

The decoupling elasticity decomposition quantitative model of energy-related carbon emission in Guangdong is established based on the extended Kaya identity and Tapio decoupling model for the first time, to explore the decoupling relationship and its internal mechanism between energy-related carbon emission and economic growth in Guangdong. Main results are as follows. (1) Total production energy-related carbon emissions in Guangdong increase from 4128 × 10⁴ tC in 1995 to 14396 × 10⁴ tC in 2011. Decoupling elasticity values of energy-related carbon emission and economic growth increase from 0.53 in 1996 to 0.85 in 2011, and its decoupling state turns from weak decoupling in 1996-2004 to expansive coupling in 2005-2011. (2) Land economic output and energy intensity are the first inhibiting factor and the first promoting factor to energy-related carbon emission decoupling from economic growth, respectively. The development speeds of land urbanization and population urbanization, especially land urbanization, play decisive roles in the change of total decoupling elasticity values. (3) Guangdong can realize decoupling of energy-related carbon emission from economic growth effectively by adjusting the energy mix and industrial structure, coordinating the development speed of land urbanization and population urbanization effectively, and strengthening the construction of carbon sink.

Space Monitoring of urban sprawl

NASA Astrophysics Data System (ADS)

Nole, G.; Lanorte, A.; Murgante, B.; Lasaponara, R.

2012-04-01

Space Monitoring of urban sprawl Gabriele Nolè (1,2), Antonio Lanorte (1), , Beniamino Murgante (2) and Rosa Lasaponara (1) , (1,2) Institute of Methodologies for Environmental Analysis, National Research Council, Italy (2) Laboratory of Urban and Territorial Systems, University of Basilicata, During the last few decades, in many regions throughout the world abandonment of agricultural land has induced a high concentration of people in densely populated urban areas. The deep social, economic and environmental changes have caused strong and extensive land cover changes. This is regarded as a pressing issue that calls for a clear understanding of the ongoing trends and future urban expansion. The main issue of great importance in modelling urban growth includes spatial and temporal dynamics, scale dynamics, man-induced land use changes. Although urban growth is perceived as necessary for a sustainable economy, uncontrolled or sprawling urban growth can cause various problems, such as, the loss of open space, landscape alteration, environmental pollution, traffic congestion, infrastructure pressure, and other social and economical issues. To face these drawbacks, a continuous monitoring of the urban growth evolution in terms of type and extent of changes over time are essential for supporting planners and decision makers in future urban planning. A critical point for the understanding and monitoring urban expansion processes is the availability of both (i) time-series data set and (ii) updated information relating to the current urban spatial structure a to define and locate the evolution trends. In such a context, an effective contribution can be offered by satellite remote sensing technologies, which are able to provide both historical data archive and up-to-date imagery. Satellite technologies represent a cost-effective mean for obtaining useful data that can be easily and systematically updated for the whole globe. Nowadays medium resolution satellite images, such as Landsat TM or ASTER can be downloaded free of charge from the NASA web site. The use of satellite imagery along with robust data analysis techniques can be used for the monitoring and planning purposes as these enable the reporting of ongoing trends of urban growth at a detailed level. Nevertheless, the exploitation of satellite Earth Observation in the field of the urban growth monitoring is a relatively new tool, although during the last three decades great efforts have been addressed to the application of remote sensing in detecting land use and land cover changes using a number of data analyses, such as: (i) Spectral enhancement based on vegetation index differencing, principal component analysis, Image differencing and visual interpretation and/or classification, (ii) post-classification change differencing and a combination of image enhancement and post-classification comparison, (iii) mixture analysis, (iv) artificial neural networks, (v) landscape metrics (patchiness and map density) and (vi) the integration of geographical information system and remote sensing data. In this paper a comparison of the methods listed before is carried out using satellite time series made up of Landsat MSS, TM, ETM+ASTER for some test areas selected in South of Italy and Cairo in order to extract and quantify urban sprawl and its spatial and temporal feature patterns.

SALLY LEVEL II- COMPUTE AND INTEGRATE DISTURBANCE AMPLIFICATION RATES ON SWEPT AND TAPERED LAMINAR FLOW CONTROL WINGS WITH SUCTION

NASA Technical Reports Server (NTRS)

Srokowski, A. J.

1994-01-01

The computer program SALLY was developed to compute the incompressible linear stability characteristics and integrate the amplification rates of boundary layer disturbances on swept and tapered wings. For some wing designs, boundary layer disturbance can significantly alter the wing performance characteristics. This is particularly true for swept and tapered laminar flow control wings which incorporate suction to prevent boundary layer separation. SALLY should prove to be a useful tool in the analysis of these wing performance characteristics. The first step in calculating the disturbance amplification rates is to numerically solve the compressible laminar boundary-layer equation with suction for the swept and tapered wing. A two-point finite-difference method is used to solve the governing continuity, momentum, and energy equations. A similarity transformation is used to remove the wall normal velocity as a boundary condition and place it into the governing equations as a parameter. Thus the awkward nonlinear boundary condition is avoided. The resulting compressible boundary layer data is used by SALLY to compute the incompressible linear stability characteristics. The local disturbance growth is obtained from temporal stability theory and converted into a local growth rate for integration. The direction of the local group velocity is taken as the direction of integration. The amplification rate, or logarithmic disturbance amplitude ratio, is obtained by integration of the local disturbance growth over distance. The amplification rate serves as a measure of the growth of linear disturbances within the boundary layer and can serve as a guide in transition prediction. This program is written in FORTRAN IV and ASSEMBLER for batch execution and has been implemented on a CDC CYBER 70 series computer with a central memory requirement of approximately 67K (octal) of 60 bit words. SALLY was developed in 1979.

Modeling fractal cities using the correlated percolation model.

NASA Astrophysics Data System (ADS)

Makse, Hernán A.; Havlin, Shlomo; Stanley, H. Eugene

1996-03-01

Cities grow in a way that might be expected to resemble the growth of two-dimensional aggregates of particles, and this has led to recent attempts to model urban growth using ideas from the statistical physics of clusters. In particular, the model of diffusion limited aggregation (DLA) has been invoked to rationalize the apparently fractal nature of urban morphologies(M. Batty and P. Longley, Fractal Cities) (Academic, San Diego, 1994). The DLA model predicts that there should exist only one large fractal cluster, which is almost perfectly screened from incoming 'development units' (representing, for example, people, capital or resources), so that almost all of the cluster growth takes place at the tips of the cluster's branches. We show that an alternative model(H. A. Makse, S. Havlin, H. E. Stanley, Nature 377), 608 (1995), in which development units are correlated rather than being added to the cluster at random, is better able to reproduce the observed morphology of cities and the area distribution of sub-clusters ('towns') in an urban system, and can also describe urban growth dynamics. Our physical model, which corresponds to the correlated percolation model in the presence of a density gradient, is motivated by the fact that in urban areas development attracts further development. The model offers the possibility of predicting the global properties (such as scaling behavior) of urban morphologies.

Total Water Management, the New Paradigm for Urban Water Systems

EPA Science Inventory

There is a growing need for urban water managers to take a more holistic view of their water resource systems as population growth, urbanization, and current resource management practices put different stresses on local water resources and urban infrastructure. Total Water Manag...

Total Water Management: The New Paradigm for Urban Water Resources Planning

EPA Science Inventory

There is a growing need for urban water managers to take a more holistic view of their water resource systems as population growth, urbanization, and current resource management practices put different stresses on local water resources and urban infrastructure. Total Water Manag...

Spatial Growth Modeling and High Resolution Remote Sensing Data Coupled with Air Quality Modeling to Assess the Impact of Atlanta, Georgia on the Local and Regional Environment

NASA Technical Reports Server (NTRS)

Quattrochi, Dale A.; Estes, Maurice G., Jr.; Crosson, William; Johnson, Hoyt; Khan, Maudood

2006-01-01

The growth of cities, both in population and areal extent, appears as an inexorable process. Urbanization continues at a rapid rate, and it is estimated that by the year 2025, 60 percent of the world s population will live in cities. Urban expansion has profound impacts on a host of biophysical, environmental, and atmospheric processes within an urban ecosystems perspective. A reduction in air quality over cities is a major result of these impacts. Because of its complexity, the urban landscape is not adequately captured in air quality models such as the Community Multiscale Air Quality (CMAQ) model that is used to assess whether urban areas are in attainment of EPA air quality standards, primarily for ground level ozone. This inadequacy of the CMAQ model to sufficiently respond to the heterogeneous nature of the urban landscape can impact how well the model predicts ozone levels over metropolitan areas and ultimately, whether cities exceed EPA ozone air quality standards. We are exploring the utility of high-resolution remote sensing data and urban spatial growth modeling (SGM) projections as improved inputs to a meteorological/air quality modeling system focusing on the Atlanta, Georgia metropolitan area as a case study. These growth projections include business as usual and smart growth scenarios out to 2030. The growth projections illustrate the effects of employing urban heat island mitigation strategies, such as increasing tree canopy and albedo across the Atlanta metro area, which in turn, are used to model how air temperature can potentially be moderated as impacts on elevating ground-level ozone, as opposed to not utilizing heat island mitigation strategies. The National Land Cover Dataset at 30m resolution is being used as the land use/land cover input and aggregated to the 4km scale for the MM5 mesoscale meteorological model and the CMAQ modeling schemes. Use of these data has been found to better characterize low density/suburban development as compared with USGS lkm land use/land cover data that have traditionally been used in modeling. Air quality prediction for future scenarios to 2030 is being facilitated by land use projections using a spatial growth model. Land use projections were developed using the 2030 Regional Transportation Plan developed by the Atlanta Regional Commission, the regional planning agency for the area. This allows the Georgia Environmental Protection Division to evaluate how these transportation plans will affect future air quality. The coupled SGM and air quality modeling approach provides insight on what the impacts of Atlanta s growth will be on the local and regional environment and exists as a mechanism that can be used by policy makers to make rational decisions on urban growth and sustainability for the metropolitan area in the future.

Remote Sensing and Spatial Growth Modeling Coupled With Air Quality Modeling to Assess the Impact of Atlanta, Georgia on the Local and Regional Environment

NASA Astrophysics Data System (ADS)

Quattrochi, D. A.; Estes, M. G.; Crosson, W. L.; Johnson, H.; Khan, M.

2006-05-01

The growth of cities, both in population and areal extent, appears as an inexorable process. Urbanization continues at a rapid rate, and it is estimated that by the year 2025, 60 percent of the world's population will live in cities. Urban expansion has profound impacts on a host of biophysical, environmental, and atmospheric processes within an urban ecosystems perspective. A reduction in air quality over cities is a major result of these impacts. Because of its complexity, the urban landscape is not adequately captured in air quality models such as the Community Multiscale Air Quality (CMAQ) model that is used to assess whether urban areas are in attainment of EPA air quality standards, primarily for ground level ozone. This inadequacy of the CMAQ model to sufficiently respond to the heterogeneous nature of the urban landscape can impact how well the model predicts ozone levels over metropolitan areas and ultimately, whether cities exceed EPA ozone air quality standards. We are exploring the utility of high-resolution remote sensing data and urban spatial growth modeling (SGM) projections as improved inputs to a meteorological/air quality modeling system focusing on the Atlanta, Georgia metropolitan area as a case study. These growth projections include "business as usual" and "smart growth" scenarios out to 2030. The growth projections illustrate the effects of employing urban heat island mitigation strategies, such as increasing tree canopy and albedo across the Atlanta metro area, which in turn, are used to model how air temperature can potentially be moderated as impacts on elevating ground-level ozone, as opposed to not utilizing heat island mitigation strategies. The National Land Cover Dataset at 30m resolution is being used as the land use/land cover input and aggregated to the 4km scale for the MM5 mesoscale meteorological model and the CMAQ modeling schemes. Use of these data has been found to better characterize low density/suburban development as compared with USGS 1km land use/land cover data that have traditionally been used in modeling. Air quality prediction for future scenarios to 2030 is being facilitated by land use projections using a spatial growth model. Land use projections were developed using the 2030 Regional Transportation Plan developed by the Atlanta Regional Commission, the regional planning agency for the area. This allows the Georgia Environmental Protection Division to evaluate how these transportation plans will affect future air quality. The coupled SGM and air quality modeling approach provides insight on what the impacts of Atlanta's growth will be on the local and regional environment and exists as a mechanism that can be used by policy makers to make rational decisions on urban growth and sustainability for the metropolitan area in the future.

Bending nanowire growth in solution by mechanical disturbance.

PubMed

Wang, Chao; Wei, Yujie; Jiang, Hongyuan; Sun, Shouheng

2010-06-09

The effect of mechanical disturbance on one-dimensional nanocrystal growth in solution phase is investigated by controlled growth of Au nanowires with and without stirring. While a static growth leads to straight, single-crystal Au nanowires, the mechanic disturbance by stirring tends to bend the nanowire growth, yielding nanowire kinks abundant in various types of crystal defects including dislocations, twin boundaries, and grain boundaries. Mechanical modeling and analysis is introduced to elucidate the nanowire growth mechanisms in these two conditions. The provided fundamental understanding of crystal defect formation at nanoscale could be applied to guide the development of advanced nanomaterials with shape control and unique mechanical properties.

Urban Growth Detection Using Filtered Landsat Dense Time Trajectory in an Arid City

NASA Astrophysics Data System (ADS)

Ye, Z.; Schneider, A.

2014-12-01

Among all remote sensing environment monitoring techniques, time series analysis of biophysical index is drawing increasing attention. Although many of them studied forest disturbance and land cover change detection, few focused on urban growth mapping at medium spatial resolution. As Landsat archive becomes open accessible, methods using Landsat time-series imagery to detect urban growth is possible. It is found that a time trajectory from a newly developed urban area shows a dramatic drop of vegetation index. This enable the utilization of time trajectory analysis to distinguish impervious surface and crop land that has a different temporal biophysical pattern. Also, the time of change can be estimated, yet many challenges remain. Landsat data has lower temporal resolution, which may be worse when cloud-contaminated pixels and SLC-off effect exist. It is difficult to tease apart intra-annual, inter-annual, and land cover difference in a time series. Here, several methods of time trajectory analysis are utilized and compared to find a computationally efficient and accurate way on urban growth detection. A case study city, Ankara, Turkey is chosen for its arid climate and various landscape distributions. For preliminary research, Landsat TM and ETM+ scenes from 1998 to 2002 are chosen. NDVI, EVI, and SAVI are selected as research biophysical indices. The procedure starts with a seasonality filtering. Only areas with seasonality need to be filtered so as to decompose seasonality and extract overall trend. Harmonic transform, wavelet transform, and a pre-defined bell shape filter are used to estimate the overall trend in the time trajectory for each pixel. The point with significant drop in the trajectory is tagged as change point. After an urban change is detected, forward and backward checking is undertaken to make sure it is really new urban expansion other than short time crop fallow or forest disturbance. The method proposed here can capture most of the urban growth during research time period, although the accuracy of time point determination is a bit lower than this. Results from several biophysical indices and filtering methods are similar. Some fallows and bare lands in arid area are easily confused with urban impervious surface.

Most-Critical Transient Disturbances in an Incompressible Flat-Plate Boundary Layer

NASA Astrophysics Data System (ADS)

Monschke, Jason; White, Edward

2015-11-01

Transient growth is a linear disturbance growth mechanism that plays a key role in roughness-induced boundary-layer transition. It occurs when superposed stable, non-orthogonal continuous spectrum modes experience algebraic disturbance growth followed by exponential decay. Algebraic disturbance growth can modify the basic state making it susceptible to secondary instabilities rapidly leading to transition. Optimal disturbance theory was developed to model the most-dangerous disturbances. However, evidence suggests roughness-induced transient growth is sub-optimal yet leads to transition earlier than optimal theory suggests. This research computes initial disturbances most unstable to secondary instabilities to further develop the applicability of transient growth theory to surface roughness. The main approach is using nonlinear adjoint optimization with solutions of the parabolized Navier-Stokes and BiGlobal stability equations. Two objective functions were considered: disturbance kinetic energy growth and sinuous instability growth rate. The first objective function was used as validation of the optimization method. Counter-rotating streamwise vortices located low in the boundary layer maximize the sinuous instability growth rate. The authors would like to acknowledge NASA and the AFOSR for funding this work through AFOSR Grant FA9550-09-1-0341.

Urban Growth Modeling Using Cellular Automata with Multi-Temporal Remote Sensing Images Calibrated by the Artificial Bee Colony Optimization Algorithm.

PubMed

Naghibi, Fereydoun; Delavar, Mahmoud Reza; Pijanowski, Bryan

2016-12-14

Cellular Automata (CA) is one of the most common techniques used to simulate the urbanization process. CA-based urban models use transition rules to deliver spatial patterns of urban growth and urban dynamics over time. Determining the optimum transition rules of the CA is a critical step because of the heterogeneity and nonlinearities existing among urban growth driving forces. Recently, new CA models integrated with optimization methods based on swarm intelligence algorithms were proposed to overcome this drawback. The Artificial Bee Colony (ABC) algorithm is an advanced meta-heuristic swarm intelligence-based algorithm. Here, we propose a novel CA-based urban change model that uses the ABC algorithm to extract optimum transition rules. We applied the proposed ABC-CA model to simulate future urban growth in Urmia (Iran) with multi-temporal Landsat images from 1997, 2006 and 2015. Validation of the simulation results was made through statistical methods such as overall accuracy, the figure of merit and total operating characteristics (TOC). Additionally, we calibrated the CA model by ant colony optimization (ACO) to assess the performance of our proposed model versus similar swarm intelligence algorithm methods. We showed that the overall accuracy and the figure of merit of the ABC-CA model are 90.1% and 51.7%, which are 2.9% and 8.8% higher than those of the ACO-CA model, respectively. Moreover, the allocation disagreement of the simulation results for the ABC-CA model is 9.9%, which is 2.9% less than that of the ACO-CA model. Finally, the ABC-CA model also outperforms the ACO-CA model with fewer quantity and allocation errors and slightly more hits.

Urban Growth Modeling Using Cellular Automata with Multi-Temporal Remote Sensing Images Calibrated by the Artificial Bee Colony Optimization Algorithm

PubMed Central

Naghibi, Fereydoun; Delavar, Mahmoud Reza; Pijanowski, Bryan

2016-01-01

Cellular Automata (CA) is one of the most common techniques used to simulate the urbanization process. CA-based urban models use transition rules to deliver spatial patterns of urban growth and urban dynamics over time. Determining the optimum transition rules of the CA is a critical step because of the heterogeneity and nonlinearities existing among urban growth driving forces. Recently, new CA models integrated with optimization methods based on swarm intelligence algorithms were proposed to overcome this drawback. The Artificial Bee Colony (ABC) algorithm is an advanced meta-heuristic swarm intelligence-based algorithm. Here, we propose a novel CA-based urban change model that uses the ABC algorithm to extract optimum transition rules. We applied the proposed ABC-CA model to simulate future urban growth in Urmia (Iran) with multi-temporal Landsat images from 1997, 2006 and 2015. Validation of the simulation results was made through statistical methods such as overall accuracy, the figure of merit and total operating characteristics (TOC). Additionally, we calibrated the CA model by ant colony optimization (ACO) to assess the performance of our proposed model versus similar swarm intelligence algorithm methods. We showed that the overall accuracy and the figure of merit of the ABC-CA model are 90.1% and 51.7%, which are 2.9% and 8.8% higher than those of the ACO-CA model, respectively. Moreover, the allocation disagreement of the simulation results for the ABC-CA model is 9.9%, which is 2.9% less than that of the ACO-CA model. Finally, the ABC-CA model also outperforms the ACO-CA model with fewer quantity and allocation errors and slightly more hits. PMID:27983633

Effect of in situ electric-field-assisted growth on antiphase boundaries in epitaxial Fe3O4 thin films on MgO

NASA Astrophysics Data System (ADS)

Kumar, Ankit; Wetterskog, Erik; Lewin, Erik; Tai, Cheuk-Wai; Akansel, Serkan; Husain, Sajid; Edvinsson, Tomas; Brucas, Rimantas; Chaudhary, Sujeet; Svedlindh, Peter

2018-05-01

Antiphase boundaries (APBs) normally form as a consequence of the initial growth conditions in all spinel ferrite thin films. These boundaries result from the intrinsic nucleation and growth mechanism, and are observed as regions where the periodicity of the crystalline lattice is disrupted. The presence of APBs in epitaxial films of the inverse spinel Fe3O4 alters their electronic and magnetic properties due to strong antiferromagnetic (AF) interactions across these boundaries. We explore the effect of using in-plane in situ electric-field-assisted growth on the formation of APBs in heteroepitaxial Fe3O4 (100)/MgO(100) thin films. The electric-field-assisted growth is found to reduce the AF interactions across APBs and, as a consequence, APB-free thin-film-like properties are obtained, which have been probed by electronic, magnetic, and structural characterization. The electric field plays a critical role in controlling the density of APBs during the nucleation process by providing an electrostatic force acting on adatoms and therefore changing their kinetics. This innovative technique can be employed to grow epitaxial spinel thin films with controlled AF interactions across APBs.

Numerical Study of the Wintertime Planetary Boundary Layer Development in the Urban Area of Sao Paulo - Brazil

NASA Astrophysics Data System (ADS)

Ribeiro, F. N. D.; Soares, J.; Oliveira, A. P.; Miranda, R. M.; Chen, F.

2015-12-01

The gradual replacement of natural by built surfaces and the ongoing emission of particulate matter and other pollutants that happens in urban environments, besides degrading the environment, influence the local weather and climate patterns. Urban areas have different albedo, heat and hydraulic capacity and conductivity, roughness, emissivity, and transmissivity, when compared to naturally vegetated areas. This set of characteristics may change the surface energy budget, air temperature, humidity, atmospheric chemical composition, wind direction and velocity, and therefore the planetary boundary layer (PBL) development. The effects of urbanization on the PBL have been studied in many mid-latitude areas, however in the tropical or subtropical areas they are scarce. The MCITY Brazil project developed in 2 cities of Brazil, Sao Paulo (23°32' S) and Rio de Janeiro (latitude 22° 55' S), has provided the necessary data to properly investigate the effects of urbanization in these two cities. The project included a campaign of soundings launched every 3 hours for 10 consecutive days in August (Austral winter) from an airport at the north part of the city of Sao Paulo, that allowed the study of the PBL development, and also the measurements of the components of the energy budget equation by micrometeorological towers. Therefore, the goal of this work is to simulate the development of the PBL in the metropolitan area of Sao Paulo during winter, comparing its characteristics in urbanized and non urbanized sites, in order to assess the impact of urbanization on the development of the PBL in this area. The model used is the Weather Research and Forecast (WRF) with a single layer urban canopy parameterization (SLUCM) and realistic anthropogenic heat diurnal evolution. Preliminary results showed that the model is able to reproduce the PBL development during the campaign, including the passage of a cold-frontal system. The urban PBL reaches greater heights during the day than the PBL in non urban sites, suggesting that the urban sites generate more turbulence. Daytime urban PBL height reaches up to 2000 m and nighttime is usually less than 200 m. The surface turbulent fluxes and the energy budget near the surface will also be compared to observations and discussed.

Urban Heat Island in the city of Bari (Italy) ant its relationship with morphological features

NASA Astrophysics Data System (ADS)

Ceppi, C.; Balena, P.; Loconte, P.; Mancini, F.

2012-04-01

The investigation of an Urban Heat Island (UHI) and its relationship with the wide range of factors able to explain its behavior is a very difficult task: the main trouble is represented by the spatial variability of the urban temperature due to the extreme heterogeneousness of the urban coverage and morphological features. In literature it is known that the local surface temperatures are influenced by the changing characteristics in urban surface and modification of land surface processes affecting the surface energy balance and the shape of boundary layer. The whole processes could lead to distinct urban climates. This work is mainly focused on the mechanisms which are actually connecting the urban morphology with the surface temperature as derived by satellite data provided from the ASTER sensor. Urban morphology could be described by several factors depending on the selected scale of analysis. At the macroscale the UHI is more related to the land-use, environmental context and boundary conditions. At the microscale the surface characteristics, urban density, ratio between green and built areas and, construction and built typology are more involved in addition to the composite indicators such as the Sky View factor and the elevation of the built texture. The case study of the city of Bari is faced. It is a medium sized city in the southern Italy, characterized by the presence of a pervasive waterfront and presence of "lame", a natural erosive furrows shallow that are typical of the Apulia country side. Such ephemeral streams convey the stormwater from the plateau of the hilly Murgia areas to the sea. Moreover, the urban complexity of the city exacerbates the spatial variability of the phenomenon. The first step aim at the investigating of the relationship between the thermal behavior and the above mentioned factors by the construction of a set of homogeneous morphological units. The classification is built both in the urban and rural zone. The second step focuses on the development of a spatial statistical analysis based on qualitative and quantitative indicators able to link the classes of urban morphology with the satellite-based surface temperature. The relationships highlighted by such a spatial analysis can be used to model the urban climate and, consequently, develop a new kind of planning more addressed towards the mitigation of the UHI phenomenon.

SMART GROWTH LAND USE PLANNING FOR A COMMUNITY AT THE RURAL URBAN INTERFACE UTILIZING STRUCTURED PUBLIC INVOLVEMENT

EPA Science Inventory

A. Simpson County, KY is facing suburban growth pressure like many communities across the country at the rural urban interface. This presents opportunities and challenges to maintain community identity, build economic diversity, protect environmental resources, and imp...

URBANIZATION EFFECTS ON TREE GROWTH IN THE VICINITY OF NEW YORK CITY

EPA Science Inventory

Plants in urban ecosystems are exposed to many pollutants and higher temperatures, CO2 and nitrogen deposition than plants in rural areas. Although each factor has a detrimental or beneficial influence on plant growth, the net effect of all factors and the key driving variables a...

Space Applications in Support of Future Urban Development in Armenia

NASA Astrophysics Data System (ADS)

Alhaddad, Bahaaeddin; Reppucci, Antonio; Moreno, Laura

2016-08-01

The fast growing of some cities has produced important changes in the urban sectors not always following sustainability criteria. As results, most urban growth falls outside formal planning controls and many cities suffer poor urban services management, traffic, and congestion, loss of green areas, poor air quality, and noise. The main advantages of satellite-based EO products are to support the decision-making process, and the development and operation of smart services. Satellite-based urban morphology analysis can help to identify the transformation of the urban development and evolution. The pilot presented here is a demonstration in the framework of the collaboration between ESA and ADB, called EOTAP "Earth Observation for a Transforming Asia Pacific". Aim of the pilot is to exploit satellite Earth observation data for sustainable growth and help preparing a series of city development and investment plans.

Investigating the Impact of Surface Heterogeneity on the Convective Boundary Layer Over Urban Areas Through Coupled Large-Eddy Simulation and Remote Sensing

NASA Technical Reports Server (NTRS)

Dominguez, Anthony; Kleissl, Jan P.; Luvall, Jeffrey C.

2011-01-01

Large-eddy Simulation (LES) was used to study convective boundary layer (CBL) flow through suburban regions with both large and small scale heterogeneities in surface temperature. Constant remotely sensed surface temperatures were applied at the surface boundary at resolutions of 10 m, 90 m, 200 m, and 1 km. Increasing the surface resolution from 1 km to 200 m had the most significant impact on the mean and turbulent flow characteristics as the larger scale heterogeneities became resolved. While previous studies concluded that scales of heterogeneity much smaller than the CBL inversion height have little impact on the CBL characteristics, we found that further increasing the surface resolution (resolving smaller scale heterogeneities) results in an increase in mean surface heat flux, thermal blending height, and potential temperature profile. The results of this study will help to better inform sub-grid parameterization for meso-scale meteorological models. The simulation tool developed through this study (combining LES and high resolution remotely sensed surface conditions) is a significant step towards future studies on the micro-scale meteorology in urban areas.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coulter, R.L.; Klazura, J.; Lesht, B.M.

The Argonne Boundary Layer Experiments (ABLE) facility, located in south central Kansas, east of Wichita, is devoted primarily to investigations of and within the planetary boundary layer (PBL), including the dynamics of the mixed layer during both day and night; effects of varying land use and landform; the interactive role of precipitation, runoff, and soil moisture; storm development; and energy budgets on scales of 10 to 100 km. With an expected lifetime of 10--15 years, the facility is well situated to observe the effects of gradual urbanization on PBL dynamics and structure as the Wichita urban area expands to themore » east and several small municipalities located within the study area expand. Combining the continuous measurements of ABLE with (1) ancillary continuous measurements of, for example, the Atmospheric Radiation Measurement (ARM) program and the Global Energy Water Cycle Experiment (GEWEX) programs and with (2) shorter, more intensive studies within ABLE, such as the Cooperative Atmosphere Surface Exchange Studies (CASES) Program, allows hypothesized features of urbanization, including heat island effects, precipitation enhancement, and modification of the surface energy budget partitioning, to be studied.« less

Urban forests for sustainable urban development

NASA Astrophysics Data System (ADS)

Sundara, Denny M.; Hartono, Djoko M.; Suganda, Emirhadi; Haeruman, S. Herman J.

2017-11-01

This paper explores the development of the urban forest in East Jakarta. By 2030 Jakarta area has a target of 30% green area covering 19,845 hectares, including urban forest covering an area of 4,631 hectares. In 2015, the city forest is only 646 hectares, while the city requires 3,985 hectares of new land Urban forest growth from year to year showed a marked decrease with increasing land area awoke to commercial functions, environmental conditions encourage the development of the city to become unsustainable. This research aims to support sustainable urban development and ecological balance through the revitalization of green areas and urban development. Analytical methods for urban forest area is calculated based on the amount of CO2 that comes from people, vehicles, and industrial. Urban spatial analysis based on satellite image data, using a GIS program is an analysis tool to determine the distribution and growth patterns of green areas. This paper uses a dynamic system model to simulate the conditions of the region against intervention to be performed on potential areas for development of urban forests. The result is a model urban forest area is integrated with a social and economic function to encourage the development of sustainable cities.

Approaches to simulating the “March of Bricks and Mortar”

USGS Publications Warehouse

Goldstein, Noah Charles; Candau, J.T.; Clarke, K.C.

2004-01-01

Re-creation of the extent of urban land use at different periods in time is valuable for examining how cities grow and how policy changes influence urban dynamics. To date, there has been little focus on the modeling of historical urban extent (other than for ancient cities). Instead, current modeling research has emphasized simulating the cities of the future. Predictive models can provide insights into urban growth processes and are valuable for land-use and urban planners, yet historical trends are largely ignored. This is unfortunate since historical data exist for urban areas and can be used to quantitatively test dynamic models and theory. We maintain that understanding the growth dynamics of a region's past allows more intelligent forecasts of its future. We compare using a spatio-temporal interpolation method with an agent-based simulation approach to recreate the urban extent of Santa Barbara, California, annually from 1929 to 2001. The first method uses current yet incomplete data on the construction of homes in the region. The latter uses a Cellular Automata based model, SLEUTH, to back- or hind-cast the urban extent. The success at historical urban growth reproduction of the two approaches used in this work was quantified for comparison. The performance of each method is described, as well as the utility of each model in re-creating the history of Santa Barbara. Additionally, the models’ assumptions about space are contrasted. As a consequence, we propose that both approaches are useful in historical urban simulations, yet the cellular approach is more flexible as it can be extended for spatio-temporal extrapolation.

Connecting Urbanization to Precipitation: the case of Mexico City

NASA Astrophysics Data System (ADS)

Georgescu, Matei

2017-04-01

Considerable evidence exists illustrating the influence of urban environments on precipitation. We revisit this theme of significant interest to a broad spectrum of disciplines ranging from urban planning to engineering to urban numerical modeling and climate, by detailing the simulated effect of Mexico City's built environment on regional precipitation. Utilizing the Weather Research and Forecasting (WRF) system to determine spatiotemporal changes in near-surface air temperature, precipitation, and boundary layer conditions induced by the modern-day urban landscape relative to presettlement conditions, I mechanistically link the built environment-induced increase in air temperature to simulated increases in rainfall during the evening hours. This simulated increase in precipitation is in agreement with historical observations documenting observed rainfall increase. These results have important implications for understanding the meteorological conditions leading to the widespread and recurrent urban flooding that continues to plague the Mexico City Metropolitan Area.

Grain growth simulation of [001] textured YBCO films grown on (001) substrates with large lattice misfit: Prediction of misorientations of the remaining boundaries

NASA Astrophysics Data System (ADS)

Tsai, Jack W. H.; Ling, Shiun; Rodriguez, Julio C.; Mustapha, Zarina; Chan, Siu-Wai

2001-04-01

We study the effects of (1) the variation of grain boundary energy with misorientation and (2) the large lattice misfit (>3%) between the films and substrates on grain growth in films by method of Monte Carlo simulations. The results from the grain growth simulation in YBa2Cu3O7-x (YBCO) films was found to concur with previous experimental observation of preferred grain orientations for YBCO films deposited on various substrates such as (001) magnesium oxide (MgO) and (001) yttria stabilized zirconia (YSZ). The simulation has helped us to identify three factors influencing the competition of these [001] tilt boundaries. They are: (1) the relative depths of local minima in the boundary energy vs. misorientation curve, (2) the number of combinations of coincidence epitaxy (CE) orientations contributing to the exact misorientation for each of the high-angle-but-low-energy (HABLE) boundaries, and (3) the number of combinations of CE orientations within the angular ranges bracketing each of the exact HABLE boundaries. Hence, these factors can be applied to clarify the origin of special misorientations observed experimentally.

Sea-town interactions over Marseille: 3D urban boundary layer and thermodynamic fields near the surface

NASA Astrophysics Data System (ADS)

Lemonsu, A.; Pigeon, G.; Masson, V.; Moppert, C.

2006-02-01

3D numerical simulations with the Meso-NH atmospheric model including the Town Energy Balance urban parameterization, are conducted over the south-east of France and the one million inhabitants city of Marseille in the frameworks of the ESCOMPTE-UBL program. The geographic situation of the area is relatively complex, because of the proximity of the Mediterranean Sea and the presence of numerous massifs, inducing complex meteorological flows. The present work is focused on six days of the campaign, characterized by the development of strong summer sea-breeze circulations. A complete evaluation of the model is initially realized at both regional- and city-scales, by using the large available database. The regional evaluation shows a good behavior of the model, during the six days of simulation, either for the parameters near the surface or for the vertical profiles describing the structure of the atmosphere. The urban-scale evaluation indicates that the fine structure of the horizontal fields of air temperature above the city is correctly simulated by the model. A specific attention is then pointed to the 250-m horizontal resolution outputs, focused on the Marseille area, for two days of the campaign. From the study of the vertical structure of the Urban Boundary Layer and the thermodynamic fields near the surface, one underscores the important differences due to the regional and local flows, and the complex interactions that occur between the urban effects and the effects of sea breezes.

Assessment of Planetary-Boundary-Layer Schemes in the Weather Research and Forecasting Model Within and Above an Urban Canopy Layer

NASA Astrophysics Data System (ADS)

Ferrero, Enrico; Alessandrini, Stefano; Vandenberghe, Francois

2018-03-01

We tested several planetary-boundary-layer (PBL) schemes available in the Weather Research and Forecasting (WRF) model against measured wind speed and direction, temperature and turbulent kinetic energy (TKE) at three levels (5, 9, 25 m). The Urban Turbulence Project dataset, gathered from the outskirts of Turin, Italy and used for the comparison, provides measurements made by sonic anemometers for more than 1 year. In contrast to other similar studies, which have mainly focused on short-time periods, we considered 2 months of measurements (January and July) representing both the seasonal and the daily variabilities. To understand how the WRF-model PBL schemes perform in an urban environment, often characterized by low wind-speed conditions, we first compared six PBL schemes against observations taken by the highest anemometer located in the inertial sub-layer. The availability of the TKE measurements allows us to directly evaluate the performances of the model; results of the model evaluation are presented in terms of quantile versus quantile plots and statistical indices. Secondly, we considered WRF-model PBL schemes that can be coupled to the urban-surface exchange parametrizations and compared the simulation results with measurements from the two lower anemometers located inside the canopy layer. We find that the PBL schemes accounting for TKE are more accurate and the model representation of the roughness sub-layer improves when the urban model is coupled to each PBL scheme.

Airborne Observations of Urban-Derived Water Vapor and Potential Impacts on Chemistry and Clouds

NASA Astrophysics Data System (ADS)

Salmon, O. E.; Shepson, P. B.; Grundman, R. M., II; Stirm, B. H.; Ren, X.; Dickerson, R. R.; Fuentes, J. D.

2015-12-01

Atmospheric conditions typical of wintertime, such as lower boundary layer heights and reduced turbulent mixing, provide a unique environment for anthropogenic pollutants to accumulate and react. Wintertime enhancements in water vapor (H2O) have been observed in urban areas, and are thought to result from fossil fuel combustion and urban heat island-induced evaporation. The contribution of urban-derived water vapor to the atmosphere has the potential to locally influence atmospheric chemistry and weather for the urban area and surrounding region due to interactions between H2O and other chemical species, aerosols, and clouds. Airborne observations of urban-derived H2O, carbon dioxide (CO2), methane, nitrogen dioxide (NO2), ozone, and aerosols were conducted from Purdue University's Airborne Laboratory for Atmospheric Research (ALAR) and the University of Maryland's (UMD) Twin Cessna research aircraft during the winter of 2015. Measurements were conducted as part of the collaborative airborne campaign, Wintertime INvestigation of Transport, Emissions, and Reactivity (WINTER), which investigated seasonal trends in anthropogenic emissions and reactivity in the Northeastern United States. ALAR and the UMD aircraft participated in mass balance experiments around Washington D.C.-Baltimore to determine total city emission rates of H2O and other greenhouse gases. Average enhancements in H2O mixing ratio of 0.048%, and up to 0.13%, were observed downwind of the urban centers on ten research flights. In some cases, downwind H2O concentrations clearly track CO2 and NO2 enhancements, suggesting a strong combustion signal. Analysis of Purdue and UMD data collected during the WINTER campaign shows an average urban-derived H2O contribution of 5.3%, and as much as 13%, to the local boundary layer from ten research flights flown in February and March of 2015. In this paper, we discuss the potential chemical and physical implications of these results.

Dynamic modeling of Tampa Bay urban development using parallel computing

USGS Publications Warehouse

Xian, G.; Crane, M.; Steinwand, D.

2005-01-01

Urban land use and land cover has changed significantly in the environs of Tampa Bay, Florida, over the past 50 years. Extensive urbanization has created substantial change to the region's landscape and ecosystems. This paper uses a dynamic urban-growth model, SLEUTH, which applies six geospatial data themes (slope, land use, exclusion, urban extent, transportation, hillside), to study the process of urbanization and associated land use and land cover change in the Tampa Bay area. To reduce processing time and complete the modeling process within an acceptable period, the model is recoded and ported to a Beowulf cluster. The parallel-processing computer system accomplishes the massive amount of computation the modeling simulation requires. SLEUTH calibration process for the Tampa Bay urban growth simulation spends only 10 h CPU time. The model predicts future land use/cover change trends for Tampa Bay from 1992 to 2025. Urban extent is predicted to double in the Tampa Bay watershed between 1992 and 2025. Results show an upward trend of urbanization at the expense of a decline of 58% and 80% in agriculture and forested lands, respectively.

Space-based monitoring of land-use/land-cover in the Upper Rio Grande Basin: An opportunity for understanding urbanization trends in a water-scarce transboundary river basin.

NASA Astrophysics Data System (ADS)

Mubako, S. T.; Hargrove, W. L.; Heyman, J. M.; Reyes, C. S.

2016-12-01

Urbanization is an area of growing interest in assessing the impact of human activities on water resources in arid regions. Remote sensing techniques provide an opportunity to analyze land cover change over time, and are useful in monitoring areas undergoing rapid urban growth. This case study for the water-scarce Upper Rio Grande River Basin uses a supervised classification algorithm to quantify the rate and evaluate the pattern of urban sprawl. A focus is made on the fast growing El-Paso-Juarez metropolitan area on the US-Mexico border and the City of Las Cruces in New Mexico, areas where environmental challenges and loss of agricultural and native land to urban development are major concerns. Preliminary results show that the land cover is dominantly native with some significant agriculture along the Rio Grande River valley. Urban development across the whole study area expanded from just under 3 percent in 1990, to more than 11 percent in 2015. The urban expansion is occurring mainly around the major urban areas of El Paso, Ciudad Juarez, and Las Cruces, although there is visible growth of smaller urban settlements scattered along the Rio Grande River valley during the same analysis period. The proportion of native land cover fluctuates slightly depending on how much land is under crops each analysis year, but there is a decreasing agricultural land cover trend suggesting that land from this sector is being lost to urban development. This analysis can be useful in planning to protect the environment, preparing for growth in infrastructure such as schools, increased traffic demands, and monitoring availability of resources such as groundwater as the urban population grows.

Growth Type and Functional Trajectories: An Empirical Study of Urban Expansion in Nanjing, China

PubMed Central

Yuan, Feng

2016-01-01

Drawing upon the Landsat satellite images of Nanjing from 1985, 1995, 2001, 2007, and 2013, this paper integrates the convex hull analysis and common edge analysis at double scales, and develops a comprehensive matrix analysis to distinguish the different types of urban land expansion. The results show that Nanjing experienced rapid urban expansion, dominated by a mix of residential and manufacturing land from 1985 to 2013, which in turn has promoted Nanjing’s shift from a compact mononuclear city to a polycentric one. Spatial patterns of three specific types of growth, namely infilling, extension, and enclave were quite different in four consecutive periods. These patterns result primarily from the existing topographic constraints, as well as government-oriented urban planning and policies. By intersecting the function maps, we also reveal the functional evolution of newly-developed urban land. Moreover, both self-enhancing and mutual promotion of the newly developed functions are surveyed over the last decade. Our study confirms that the integration of a multi-scale method and multi-perspective analysis, such as the spatiotemporal patterns and functional evolution, helps us to better understand the rapid urban growth in China. PMID:26845155

Assessment of urban tree growth from structure, nutrients and composition data derived from airborne lidar and imaging spectroscopy

NASA Astrophysics Data System (ADS)

Gu, H.; Townsend, P. A.; Singh, A.

2014-12-01

Urban forests provide important ecosystem services related to climate, nutrients, runoff and aesthetics. Assessment of variations in urban forest growth is critical to urban management and planning, as well as to identify responses to climate and other environmental changes. We estimated annual relative basal area increment by tree rings from 37 plots in Madison, Wisconsin and neighboring municipalities. We related relative basal area growth to variables of vegetation traits derived from remote sensing, including structure (aboveground biomass, diameter, height, basal area, crown width and crown length) from discrete-return airborne lidar, and biochemical variables (foliar nitrogen, carbon, lignin, cellulose, fiber and LMA), spectral indices (NDVI, NDWI, PRI, NDII etc.) and species composition from AVIRIS hyperspectral imagery. Variations in tree growth was mainly correlated with tree species composition (R2 = 0.29, RMSE = 0.004) with coniferous stands having a faster growth rate than broadleaf plots. Inclusion of stand basal area improved model prediction from R2 = 0.29 to 0.35, with RMSE = 0.003. Then, we assessed the growth by functional type, we found that foliar lignin concentration and the proportion of live coniferous trees explained 57% variance in the growth of conifer stands. In contrast, broadleaf forest growth was more strongly correlated with species composition and foliar carbon (R2 = 0.59, RMSE = 0.003). Finally, we compared the relative basal area growth by species. In our study area, red pine and white pine exhibited higher growth rates than other species, while white oak plots grew slowest. There is a significant negative relationship between tree height and the relative growth in red pine stands (r = -0.95), as well as a strong negative relationship between crown width and the relative growth in white pine stands (r = -0.87). Growth declines as trees grow taller and wider may partly be the result of reduced photosynthesis and water availability. We also found that canopy cellulose content was negatively correlated with growth in white oak (r = -0.59), which could be caused by trade off of carbon allocation from shoot storage to leaves. These results demonstrate the potential of lidar and hyperspectral imagery to characterize important traits associated with biomass accumulation in urban forests.

Stratification of women's sport in contemporary China.

PubMed

Xiong, Huan

2011-01-01

Since economic reform in the 1980s, Chinese sport has undergone an extraordinary transformation. The most distinguishing phenomenon is the rapid growth of mass sport at the grassroots level with increasing demands for physical activities in women's daily lives. The rapid growth of women's sports participation at the grassroots is deeply embedded in the process of social stratification as a result of the urbanisation of Chinese society. The purpose of this paper is to use the socialist, feminist and theoretical framework to explore how Chinese women's different economic, educational, domestic and cultural situations shape their sports values and patterns of participation, marking social boundaries in Chinese urban communities. Semi-structured interviews and observations were conducted with 60 female physical exercisers in sports clubs, parks and neighbourhood playgrounds. Documentary research was also applied as a complement method to the interview. The findings indicate that within different classes (middle class, working class and a group who were unemployed), many different opportunities for and limitations on women to participate in sport are noticed. Chinese women have not fully and equally utilised sports opportunities created by urbanisation. Most Chinese women still live within patriarchal arrangements. Consequently, they do not completely fulfil their ambitions in sport.

Optimal disturbances in boundary layers subject to streamwise pressure gradient

NASA Technical Reports Server (NTRS)

Ashpis, David E.; Tumin, Anatoli

2003-01-01

An analysis of the optimal non-modal growth of perturbations in a boundary layer in the presence of a streamwise pressure gradient is presented. The analysis is based on PSE equations for an incompressible fluid. Examples with Falkner-Scan profiles indicate that a favorable pressure gradient decreases the non-modal growth, while an unfavorable pressure gradient leads to an increase of the amplification. It is suggested that the transient growth mechanism be utilized to choose optimal parameters of tripping elements on a low-pressure turbine (LPT) airfoil. As an example, a boundary layer flow with a streamwise pressure gradient corresponding to the pressure distribution over a LPT airfoil is considered. It is shown that there is an optimal spacing of the tripping elements and that the transient growth effect depends on the starting point.

Future Climate Prediction of Urban Atmosphere in A Tropical Megacity: Utilization of RCP/SSP Scenarios with an Urban Growth Model

NASA Astrophysics Data System (ADS)

Darmanto, N. S.; Varquez, A. C. G.; Kanda, M.; Takakuwa, S.

2016-12-01

Economic development in Southeast Asia megacities leads to rapid transformation into more complicated urban configurations. These configurations, including building geometry, enhance aerodynamic drag thus reducing near-surface wind speeds. Roughness parameters representing building geometry, along with anthropogenic heat emissions, contribute to the formation of urban heat islands (UHI). All these have been reproduced successfully in the Weather Research and Forecasting (WRF) Model coupled with an improved single-layer urban canopy model incorporating a realistic distribution of urban parameters and anthropogenic heat emission in the Jakarta Greater Area. We apply this technology to climate change studies by introducing future urbanization defined by urban sprawl, vertical rise in buildings, and increase anthropogenic heat emission (AHE) due to population changes, into futuristic climate modelling. To simulate 2050s future climate, pseudo-global warming method was used which relied on current and ensembles of 5 CMIP5 GCMs for 2 representative concentration pathways (RCP), 2.6 and 8.5. To determine future urbanization level, 2050 population growth and energy consumption were estimated from shared socioeconomic pathways (SSP). This allows the estimation of future urban sprawl, building geometry, and AHE using the SLEUTH urban growth model and spatial growth assumptions. Two cases representing combinations of RCP and SSP were simulated in WRF: RCP2.6-SSP1 and RCP8.5-SSP3. Each case corresponds to best and worst-case scenarios of implementing adaptation and mitigation strategies, respectively. It was found that 2-m temperature of Jakarta will increase by 0.62°C (RCP2.6) and 1.44°C (RCP8.5) solely from background climate change; almost on the same magnitude as the background temperature increase of RCP2.6 (0.5°C) and RCP8.5 (1.2°C). Compared with previous studies, the result indicates that the effect of climate change on UHI in tropical cities may be lesser than cities located in the mid-latitudes. However, it is expected that the combined effect of urbanization and climate change will result to significant changes on future urban temperature. ACK: This research was supported by the Environment Research and Technology Development Fund (S-14) of the Ministry of the Environment, Japan.

Continuous atmospheric boundary layer observations in the coastal urban area of Barcelona, Spain

NASA Astrophysics Data System (ADS)

Pandolfi, M.; Martucci, G.; Querol, X.; Alastuey, A.; Wilsenack, F.; Frey, S.; O'Dowd, C. D.; Dall'Osto, M.

2013-01-01

Continuous measurements of Surface Mixed Layer (SML), Decoupled Residual/Convective Layer (DRCL) and aerosol backscatter coefficient were performed within the Barcelona (NE Spain) boundary layer from September to October 2010 (30 days) in the framework of the SAPUSS (Solving Aerosol Problems Using Synergistic Strategies) field campaign. Two near-infrared ceilometers (Jenoptik CHM15K) vertically and horizontally-probing (only vertical profiles are discussed) were deployed during SAPUSS and compared with potential temperature profiles measured by daily radiosounding (midnight and midday) to interpret the boundary layer structure in the urban area of Barcelona. Ceilometer-based DRCL (1761±363 m a.g.l.) averaged over the campaign duration were twice as high as the mean SML (904±273 m a.g.l.) with a marked SML diurnal cycle. The overall agreement between the ceilometer-retrieved and radiosounding-based SML heights (R2=0.8) revealed overestimation of the SML by the ceilometer (Δh=145±145 m). After separating the data in accordance with different atmospheric scenarios, the lowest SML (736±183 m) and DRCL (1573±428 m) were recorded during warm North African (NAF) advected air mass. By contrast, higher SML and DRCL were observed during stagnant regional (REG) (911±234 m and 1769±314 m, respectively) and cold Atlantic (ATL) (965±222 m and 1878±290 m, respectively) air masses. The SML during the NAF scenario frequently showed a flat upper boundary throughout the day because of strong winds from the Mediterranean Sea that limit the midday SML convective growth observed during ATL and REG scenarios. The mean backscatter coefficients were calculated at two selected heights as representative of middle and top SML portions, i.e. β500=0.59±0.45 M m-1 sr-1 and β800=0.87±0.68 M m-1 sr-1 at 500 m and 800 m a.g.l., respectively. The highest backscatter coefficients were observed during NAF (β500=0.77±0.57 M m-1 sr-1) when compared with ATL (β500= 0.51±0.44 M m-1 sr-1) and REG (β500= 0.64±0.39 M m-1 sr-1). The relationship between the vertical change in backscatter coefficient and atmospheric stability (∂θ/∂z) was investigated in the first 3000 m a.g.l., demonstrating a positive correlation between unstable conditions and enhanced backscatter and vice versa.

Influence of urban pattern on inundation flow in floodplains of lowland rivers.

PubMed

Bruwier, M; Mustafa, A; Aliaga, D G; Archambeau, P; Erpicum, S; Nishida, G; Zhang, X; Pirotton, M; Teller, J; Dewals, B

2018-05-01

The objective of this paper is to investigate the respective influence of various urban pattern characteristics on inundation flow. A set of 2000 synthetic urban patterns were generated using an urban procedural model providing locations and shapes of streets and buildings over a square domain of 1×1km 2 . Steady two-dimensional hydraulic computations were performed over the 2000 urban patterns with identical hydraulic boundary conditions. To run such a large amount of simulations, the computational efficiency of the hydraulic model was improved by using an anisotropic porosity model. This model computes on relatively coarse computational cells, but preserves information from the detailed topographic data through porosity parameters. Relationships between urban characteristics and the computed inundation water depths have been based on multiple linear regressions. Finally, a simple mechanistic model based on two district-scale porosity parameters, combining several urban characteristics, is shown to capture satisfactorily the influence of urban characteristics on inundation water depths. The findings of this study give guidelines for more flood-resilient urban planning. Copyright © 2017 Elsevier B.V. All rights reserved.

Cities and Urban Land Use in Advanced Placement Human Geography.

ERIC Educational Resources Information Center

Ford, Larry R.

2000-01-01

Discusses the cities and urban land use section of the Advanced Placement (AP) human geography course, focusing on the: (1) definitions of urbanism; (2) origin and evolution of cities; (3) functional character of contemporary cities; (4) built environment and social space; and (5) responses to urban growth. (CMK)

Entry-Level Jobs, Mobility, and Urban Minority Unemployment.

ERIC Educational Resources Information Center

Kasarda, John D.

1983-01-01

Documents the extent of urban transportation and entry-level job losses in major cities. Describes the mismatch between educational requisites of newer growth industries and educational background of urban minorities, and highlights the role of this mismatch in the increase in urban minority unemployment and welfare dependency. (EF)

Geospatial Distribution of Heavy Metals in an Urban Soil, El Paso, Texas, USA

NASA Astrophysics Data System (ADS)

Amaya, M. A.; Elkekli, A. R.; Clague, J. W.; Grimida, S. E.; Pingitore, N. E., Jr.

2014-12-01

Some 500 city blocks were selected randomly via population-based stratification. Equal volumes of soil collected from the public space (where present) in front of each house on a block yielded a composite sample. Composites provide neighborhood level "smoothing" relative to sampling many individual houses, and greatly decrease laboratory effort/cost. In the laboratory 10 g of soil were comminuted in a ceramic ball mill, mixed with cellulose/ paraffin binder, and pressed (20 tons) into a pellet. A Panalytical Epsilon5 EDS-XRF, using 8 sequential secondary target conditions and 12 NIST and USGS multi-element rock standards provided analyses. The concentration of Pb ranged from 11 to 420 ppm; Cr, 4.3 - 52 ppm; Cu, 6.5 - 390 ppm; Zn, 17 - 480 ppm; Cd, 0.4 - 12 ppm; and Sb, 2.9 - 20 ppm. High levels of all metals characterize the urban core area of El Paso, which dates to the late 19th Century. This area hosts both commercial and old residential structures, as well as major highways and a large railroad yard. There currently is, and was in the past, considerable light industry in the area. Two highly traveled highway and one railroad border crossing over the Rio Grande into contiguous Cd. Juarez (population close to 2 million) add to current and past contamination. A century-old Pb-Cu-Zn smelter, recently demolished, forms the western boundary of the urban core. Heavy metal pollution from the smelter is recognized near the former site. Its effect on the rest of the urban core is uncertain due to the current and former presence of other heavy metal sources. Aggressive post-World War II growth and expansion of El Paso into the surrounding desert, as is common in the US Southwest, placed newer housing onto more pristine land surfaces. This is reflected in generally low-to-background levels of heavy metals in these newer areas of the city. Thus there is a strong contamination and heavy metals exposure risk gradient between older and newer neighborhoods within a single city, El Paso. In contrast, in older cities (e.g., US Northeast) where metropolitan boundaries are long-established, the equivalent risk gradient would be between the city and surrounding suburbs, each subject to separate government (political) controls and different funding and resources for cleanup and prevention measures. Research supported by NIEHS Grant 1RO1-ES11367.

Creep crack growth by grain boundary cavitation under monotonic and cyclic loading

NASA Astrophysics Data System (ADS)

Wen, Jian-Feng; Srivastava, Ankit; Benzerga, Amine; Tu, Shan-Tung; Needleman, Alan

2017-11-01

Plane strain finite deformation finite element calculations of mode I crack growth under small scale creep conditions are carried out. Attention is confined to isothermal conditions and two time histories of the applied stress intensity factor: (i) a monononic increase to a plateau value subsequently held fixed; and (ii) a cyclic time variation. The crack growth calculations are based on a micromechanics constitutive relation that couples creep deformation and damage due to grain boundary cavitation. Grain boundary cavitation, with cavity growth due to both creep and diffusion, is taken as the sole failure mechanism contributing to crack growth. The influence on the crack growth rate of loading history parameters, such as the magnitude of the applied stress intensity factor, the ratio of the applied minimum to maximum stress intensity factors, the loading rate, the hold time and the cyclic loading frequency, are explored. The crack growth rate under cyclic loading conditions is found to be greater than under monotonic creep loading with the plateau applied stress intensity factor equal to its maximum value under cyclic loading conditions. Several features of the crack growth behavior observed in creep-fatigue tests naturally emerge, for example, a Paris law type relation is obtained for cyclic loading.

Progress towards the child mortality millennium development goal in urban sub-Saharan Africa: the dynamics of population growth, immunization, and access to clean water.

PubMed

Fotso, Jean-Christophe; Ezeh, Alex Chika; Madise, Nyovani Janet; Ciera, James

2007-08-28

Improvements in child survival have been very poor in sub-Saharan Africa (SSA). Since the 1990 s, declines in child mortality have reversed in many countries in the region, while in others, they have either slowed or stalled, making it improbable that the target of reducing child mortality by two thirds by 2015 will be reached. This paper highlights the implications of urban population growth and access to health and social services on progress in achieving MDG 4. Specifically, it examines trends in childhood mortality in SSA in relation to urban population growth, vaccination coverage and access to safe drinking water. Correlation methods are used to analyze national-level data from the Demographic and Health Surveys and from the United Nations. The analysis is complemented by case studies on intra-urban health differences in Kenya and Zambia. Only five of the 22 countries included in the study have recorded declines in urban child mortality that are in line with the MDG target of about 4% per year; five others have recorded an increase; and the 12 remaining countries witnessed only minimal decline. More rapid rate of urban population growth is associated with negative trend in access to safe drinking water and in vaccination coverage, and ultimately to increasing or timid declines in child mortality. There is evidence of intra-urban disparities in child health in some countries like Kenya and Zambia. Failing to appropriately target the growing sub-group of the urban poor and improve their living conditions and health status - which is an MDG target itself - may result in lack of improvement on national indicators of health. Sustained expansion of potable water supplies and vaccination coverage among the disadvantaged urban dwellers should be given priority in the efforts to achieve the child mortality MDG in SSA.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sultan, M.; Fiske, M.; Stein, T.

Comparisons of satellite images of the Nile Delta, acquired in 1972, 1984 and 1990, indicate that urban growth is endangering Egypt's agricultural productivity. Urban areas occupied a minimum of 3.6%, 4.7% and 5.7% of the Delta in 1972, 1984 and 1990, respectively, an increase of 58% in 18 years. Approximately half of this increase occurred between 1984 and 1990. If this trend continues, Egypt could lose 12% of its total agricultural area to urbanization by 2010. Despite the fact that growth is pronounced around the cities, it is the growth around the thousands of small villages that poses the largestmore » threat to the agricultural productivity of the Nile Delta. The cumulative growth rate for the cities and large villages between 1972 and 1990 is 37%, and that for the small villages is 77% for the same time period.« less

[State of the world population, 1986].

PubMed

1987-01-01

The majority of the world population will soon reside in urban areas. At present, over 40% of the world's people are urban, and 50% will be urban soon after the year 2000. The proportion urban in developed countries has exceeded 50% since the mid-20th century, and in developing countries this level will be reached in the 1st quarter of the next century. Developing countries in Asia and Africa have less than 30% of their population urban. While over 70% of Latin America's population is urban. Within the next 50 years, the predominantly rural character of the developing countries will disappear forever. Currently the majority of the world's urban population lives in developing countries. In 1970, 695 million urban dwellers were in developed countries vs. 666 million in developing countries, but by 1985, there were only 849 million urban dwellers in developed countries vs. 1164 million in developing countries. By the year 2025, there will be nearly 4 times as many urban dwellers in developing countries. An increasing proportion of the urban population will reside in the largest cities. Around 2025, almost 30% of the urban population in developing countries will live in cities of over 4 million. Around 2000 there will be 5 cities of 15 million or more, 3 of them in developing countries. The proportion of the 20 largest cities in developing countries will increase from 9 in 1970 to 16 in 2000. The close relationship between city size and economic development that existed until the recent past is disappearing. It is possible that the very largest cities will no longer be at the center of international political and economic networks. Many developing countries will have to develop plans for cities of sizes never imagined in the developed countries of today. High rates of population increase in the developing countries are an inseparable aspect of their urbanization. Growth of the urban population in developing countries will continue to be rapid until well into the 21st century. The world rate of urban growth will continue to be about 2.5%/year during the 1st quarter of sthe 21st century. The annual rate of urban growth is 3.5% in developing countries and is highest in Africa, especially West Africa where it reaches 6.5%/year. Despite migration to cities, the rural population in developing countries will continue to grow at a rate of about 1%/year through the end of the century. In many rural areas, population density is already very high, and continued growth will hamper efforts to reduce urban migration. In developing countries, the increase in the urban population is due more to natural increase than to migration.

Determination of grain boundary mobility during recrystallization by statistical evaluation of electron backscatter diffraction measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Basu, I., E-mail: basu@imm.rwth-aachen.de; Chen, M.; Loeck, M.

One of the key aspects influencing microstructural design pathways in metallic systems is grain boundary motion. The present work introduces a method by means of which direct measurement of grain boundary mobility vs. misorientation dependence is made possible. The technique utilizes datasets acquired by means of serial electron backscatter diffraction (EBSD) measurements. The experimental EBSD measurements are collectively analyzed, whereby datasets were used to obtain grain boundary mobility and grain aspect ratio with respect to grain boundary misorientation. The proposed method is further validated using cellular automata (CA) simulations. Single crystal aluminium was cold rolled and scratched in order tomore » nucleate random orientations. Subsequent annealing at 300 °C resulted in grains growing, in the direction normal to the scratch, into a single deformed orientation. Growth selection was observed, wherein the boundaries with misorientations close to Σ7 CSL orientation relationship (38° 〈111〉) migrated considerably faster. The obtained boundary mobility distribution exhibited a non-monotonic behavior with a maximum corresponding to misorientation of 38° ± 2° about 〈111〉 axes ± 4°, which was 10–100 times higher than the mobility values of random high angle boundaries. Correlation with the grain aspect ratio values indicated a strong growth anisotropy displayed by the fast growing grains. The observations have been discussed in terms of the influence of grain boundary character on grain boundary motion during recrystallization. - Highlights: • Statistical microstructure method to measure grain boundary mobility during recrystallization • Method implementation independent of material or crystal structure • Mobility of the Σ7 boundaries in 5N Al was calculated as 4.7 × 10{sup –8} m{sup 4}/J ⋅ s. • Pronounced growth selection in the recrystallizing nuclei in Al • Boundary mobility values during recrystallization 2–3 orders of magnitude larger vis-à-vis curvature driven motion.« less

Methods for Monitoring the Detection of Multi-Temporal Land Use Change Through the Classification of Urban Areas

NASA Astrophysics Data System (ADS)

Alhaddad, B. I.; Burns, M. C.; Roca, J.

2011-08-01

Urban areas are complicated due to the mix of man-made features and natural features. A higher level of structural information plays an important role in land cover/use classification of urban areas. Additional spatial indicators have to be extracted based on structural analysis in order to understand and identify spatial patterns or the spatial organization of features, especially for man-made feature. It's very difficult to extract such spatial patterns by using only classification approaches. Clusters of urban patterns which are integral parts of other uses may be difficult to identify. A lot of public resources have been directed towards seeking to develop a standardized classification system and to provide as much compatibility as possible to ensure the widespread use of such categorized data obtained from remote sensor sources. In this paper different methods applied to understand the change in the land use areas by understanding and monitoring the change in urban areas and as its hard to apply those methods to classification results for high elements quantities, dusts and scratches (Roca and Alhaddad, 2005). This paper focuses on a methodology developed based relation between urban elements and how to join this elements in zones or clusters have commune behaviours such as form, pattern, size. The main objective is to convert urban class category in to various structure densities depend on conjunction of pixel and shortest distance between them, Delaunay triangulation has been widely used in spatial analysis and spatial modelling. To identify these different zones, a spatial density-based clustering technique was adopted. In highly urban zones, the spatial density of the pixels is high, while in sparsely areas the density of points is much lower. Once the groups of pixels are identified, the calculation of the boundaries of the areas containing each group of pixels defines the new regions indicate the different contains inside such as high or low urban areas. Multi-temporal datasets from 1986, 1995 and 2004 used to urban region centroid to be our reference in this study which allow us to follow the urban movement, increase and decrease by the time. Kernel Density function used to Calculates urban magnitude, Voronoi algorithm is proposed for deriving explicit boundaries between objects units. To test the approach, we selected a site in a suburban area in Barcelona Municipality, the Spain.

Urban Runoff: Model Ordinances for Aquatic Buffers

EPA Pesticide Factsheets

Aquatic Buffers serve as natural boundaries between local waterways and existing development. The model and example ordinaces below provide suggested language or technical guidance designed to create the most effective stream buffer zones possible.

Wildfire smoke transport and impact on air quality observed by a mullti-wavelength elastic-raman lidar and ceilometer in New York city

NASA Astrophysics Data System (ADS)

Wu, Yonghua; Peña, Wilson; Gross, Barry.; Moshary, Fred

2018-04-01

The intense wildfires from the western Canada in May 2016 injected large amount of smoke into the atmosphere. This paper presents integrated observation of the event by a lidar, ceilometer, and satellite together with models and an assessment of smoke plume impacts on local air quality in New York City (NYC) area. A dense aloft plume on May 20 and a boundary layer plume on May 25 are analyzed. The smoke mixing into planetary-boundary-layer (PBL) and strong diurnal variation of PBL-top are shown. For the 2ndcase, the ground PM2.5 measurements show a significant increase in both the urban and upwind non-urban areas of NYC. The smoke sources and transport paths are further verified by the satellite observations and HYSPLIT model data.

Urban effects on regional climate: a case study in the Phoenix and Tucson ‘sun’ corridor

USGS Publications Warehouse

Zhao Yang,; Francina Dominguez,; Hoshin Gupta,; Xubin Zeng,; Norman, Laura M.

2016-01-01

Land use and land cover change (LULCC) due to urban expansion alter the surface albedo, heat capacity, and thermal conductivity of the surface. Consequently, the energy balance in urban regions is different from that of natural surfaces. To evaluate the changes in regional climate that could arise due to projected urbanization in the Phoenix-Tucson corridor, Arizona, we applied the coupled WRF-NOAH-UCM (which includes a detailed urban radiation scheme) to this region. Land cover changes were represented using land cover data for 2005 and projections to 2050, and historical North American Regional Reanalysis (NARR) data were used to specify the lateral boundary conditions. Results suggest that temperature changes will be well defined, reflecting the urban heat island (UHI) effect within areas experiencing LULCC. Changes in precipitation are less robust, but seem to indicate reductions in precipitation over the mountainous regions northeast of Phoenix and decreased evening precipitation over the newly-urbanized area.

Urban and rural land use in Puerto Rico

Treesearch

Sebastian Martinuzzi; William A. Gould; Olga M. Ramos Gonzalez; Maya Quinones; Michael E. Jimenez

2008-01-01

We have developed three land use regions for Puerto Rico: Urban, Suburban, and Rural (Gould et al. 2008; Martinuzzi et al. 2007). These three regions can also be considered urban, densely-populated rural, and sparsely-populated rural or as urban and wildland with a wildland-urban interface. The suburban use is the most dynamic in terms of population growth and land...

Temporal dynamics of a subtropical urban forest in San Juan, Puerto Rico, 2001-2010

Treesearch

J. M. Tucker Lima; C. L. Staudhammer; T. J. Brandeis; F. J. Escobedo; W. Zipperer

2013-01-01

Several studies report urban tree growth and mortality rates as well as species composition, structural dynamics, and other characteristics of urban forests in mostly temperate, inland urban areas. Temporal dynamics of urban forests in subtropical and tropical forest regions are, until now, little explored and represent a new and important direction for study and...

Urbanization prolongs hantavirus epidemics in cities

PubMed Central

Tian, Huaiyu; Hu, Shixiong; Chowell, Gerardo; Gao, Lidong; Li, Yapin; Yang, Huisuo; Li, Yidan; Yang, Qiqi; Tong, Xin; Huang, Ru; Bjornstad, Ottar N.; Xiao, Hong; Stenseth, Nils Chr.

2018-01-01

Urbanization and rural–urban migration are two factors driving global patterns of disease and mortality. There is significant concern about their potential impact on disease burden and the effectiveness of current control approaches. Few attempts have been made to increase our understanding of the relationship between urbanization and disease dynamics, although it is generally believed that urban living has contributed to reductions in communicable disease burden in industrialized countries. To investigate this relationship, we carried out spatiotemporal analyses using a 48-year-long dataset of hemorrhagic fever with renal syndrome incidence (HFRS; mainly caused by two serotypes of hantavirus in China: Hantaan virus and Seoul virus) and population movements in an important endemic area of south China during the period 1963–2010. Our findings indicate that epidemics coincide with urbanization, geographic expansion, and migrant movement over time. We found a biphasic inverted U-shaped relationship between HFRS incidence and urbanization, with various endemic turning points associated with economic growth rates in cities. Our results revealed the interrelatedness of urbanization, migration, and hantavirus epidemiology, potentially explaining why urbanizing cities with high economic growth exhibit extended epidemics. Our results also highlight contrasting effects of urbanization on zoonotic disease outbreaks during periods of economic development in China. PMID:29666240

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tjade, A.S.

The relationship between urban growth and energy consumption to public transport is analyzed. The main emphasis is upon daily travel in urban areas. Recommendations are made on how different urban functions should be located and developed to minimize the energy consumption for daily travels.

Automatic mapping of urban areas from Landsat data using impervious surface fraction algorithm

NASA Astrophysics Data System (ADS)

Nguyen, S. T.; Chen, C. F.; Chen, C. R.

2014-12-01

Urbanization is a result of aggregation of people in urban areas that can help advance socioeconomic development and pull out people from the poverty line. However, if not monitored well, it can also lead to loss of farmlands, natural forests as well as to societal impacts including burgeoning growth of slums, pollution, and crime. Thus, spatiotemporal information that shapes the urbanization is thus critical to the process of urban planning. The overall objective of this study is to develop an impervious surface fraction algorithm (ISFA) for automatically mapping urban areas from Landsat data. We processed the data for 1986, 2001 and 2014 to trace the multi-decadal spatiotemporal change of Honduran capital city using a three-step procedure: (1) data pre-processing to perform image normalization as well as to produce the difference in the values (DVSS) between the simple ratio (SR) of green and shortwave bands and the soil adjust vegetation index (SAVI), (2) quantification of urban areas using ISFA, and (3) accuracy assessment of mapping results using the ground reference data constructed using land-cover maps and FORMOSAT-2 imagery. The mapping accuracy assessment was performed for 2001 and 2014 by comparing with the ground reference data indicated satisfactory results with the overall accuracies and Kappa coefficients generally higher than 90% and 0.8, respectively. When examining the urbanization between these years, it could be observed that the urban area was significantly expanded from 1986 to 2014, mainly driven by two factors of rapid population growth and socioeconomic development. This study eventually leads to a realization of the merit of using ISFA for multi-decadal monitoring of the urbanization of Honduran capital city from Landsat data. Results from this research can be used by urban planners as a general indicator to quantify urban change and environmental impacts. The methods were thus transferable to monitor urban growth in cities and their peri areas around the world.

Temperature responses of some North Atlantic Cladophora species (Chlorophyceae) in relation to their geographic distribution

NASA Astrophysics Data System (ADS)

Cambridge, M.; Breeman, A. M.; van Oosterwijk, R.; van den Hoek, C.

1984-09-01

The temperature responses for growth and survival have been experimentally tested for 6 species of the green algal genus Cladophora (Chlorophyceae; Cladophorales) (all isolated from Roscoff, Brittany, France, one also from Connecticut, USA), selected from 4 distribution groups, in order to determine which phase in the annual temperature regime might prevent the spread of a species beyond its present latitudinal range on the N. Atlantic coasts. For five species geographic limits could be specifically defined as due to a growth limit in the growing season or to a lethal limit in the adverse season. These species were: (1) C. coelothrix (Amphiatlantic tropical to warm temperate), with a northern boundary on the European coasts formed by a summer growth limit near the 12°C August isotherm. On the American coasts sea temperatures should allow its occurrence further north. (2) C. vagabunda (Amphiatlantic tropical to temperate), with a northern boundary formed by a summer growth limit near the 15°C August isotherm on both sides of the Atlantic. (3) C. dalmatica, as for C. vagabunda. (4) C. hutchinsiae (Mediterranean-Atlantic warm temperate), with a northern boundary formed by a summer growth limit near the 12°C August isotherm, and possibly also a winter lethal limit near the 6°C February isotherm; and a southern boundary formed by a southern lethal limit near the 26°C August isotherm. It is absent from the warm temperate American coast because its lethal limits, 5° and 30°C, are regularly reached there. (5) Preliminary data for C. rupestris (Amphiatlantic temperate), suggest the southeastern boundary on the African coast to be a summer lethal limit near the 26°C August isotherm; the southwestern boundary on the American coast lies on the 20°C August isotherm. For one species, C. albida, the experimental growth and survival range was wider than expected from its geographic distribution, and reasons to account for this are suggested.

Physics-based statistical model and simulation method of RF propagation in urban environments

DOEpatents

Pao, Hsueh-Yuan; Dvorak, Steven L.

2010-09-14

A physics-based statistical model and simulation/modeling method and system of electromagnetic wave propagation (wireless communication) in urban environments. In particular, the model is a computationally efficient close-formed parametric model of RF propagation in an urban environment which is extracted from a physics-based statistical wireless channel simulation method and system. The simulation divides the complex urban environment into a network of interconnected urban canyon waveguides which can be analyzed individually; calculates spectral coefficients of modal fields in the waveguides excited by the propagation using a database of statistical impedance boundary conditions which incorporates the complexity of building walls in the propagation model; determines statistical parameters of the calculated modal fields; and determines a parametric propagation model based on the statistical parameters of the calculated modal fields from which predictions of communications capability may be made.

Urban growth, climate change, and freshwater availability

PubMed Central

McDonald, Robert I.; Green, Pamela; Balk, Deborah; Fekete, Balazs M.; Revenga, Carmen; Todd, Megan; Montgomery, Mark

2011-01-01

Nearly 3 billion additional urban dwellers are forecasted by 2050, an unprecedented wave of urban growth. While cities struggle to provide water to these new residents, they will also face equally unprecedented hydrologic changes due to global climate change. Here we use a detailed hydrologic model, demographic projections, and climate change scenarios to estimate per-capita water availability for major cities in the developing world, where urban growth is the fastest. We estimate the amount of water physically available near cities and do not account for problems with adequate water delivery or quality. Modeled results show that currently 150 million people live in cities with perennial water shortage, defined as having less than 100 L per person per day of sustainable surface and groundwater flow within their urban extent. By 2050, demographic growth will increase this figure to almost 1 billion people. Climate change will cause water shortage for an additional 100 million urbanites. Freshwater ecosystems in river basins with large populations of urbanites with insufficient water will likely experience flows insufficient to maintain ecological process. Freshwater fish populations will likely be impacted, an issue of special importance in regions such as India's Western Ghats, where there is both rapid urbanization and high levels of fish endemism. Cities in certain regions will struggle to find enough water for the needs of their residents and will need significant investment if they are to secure adequate water supplies and safeguard functioning freshwater ecosystems for future generations. PMID:21444797

Assessments of urban growth in the Tampa Bay watershed using remote sensing data

USGS Publications Warehouse

Xian, G.; Crane, M.

2005-01-01

Urban development has expanded rapidly in the Tampa Bay area of west-central Florida over the past century. A major effect associated with this population trend is transformation of the landscape from natural cover types to increasingly impervious urban land. This research utilizes an innovative approach for mapping urban extent and its changes through determining impervious surfaces from Landsat satellite remote sensing data. By 2002, areas with subpixel impervious surface greater than 10% accounted for approximately 1800 km2, or 27 percent of the total watershed area. The impervious surface area increases approximately three-fold from 1991 to 2002. The resulting imperviousness data are used with a defined suite of geospatial data sets to simulate historical urban development and predict future urban and suburban extent, density, and growth patterns using SLEUTH model. Also examined is the increasingly important influence that urbanization and its associated imperviousness extent have on the individual drainage basins of the Tampa Bay watershed.

Ca-Pri a Cellular Automata Phenomenological Research Investigation: Simulation Results

NASA Astrophysics Data System (ADS)

Iannone, G.; Troisi, A.

2013-05-01

Following the introduction of a phenomenological cellular automata (CA) model capable to reproduce city growth and urban sprawl, we develop a toy model simulation considering a realistic framework. The main characteristic of our approach is an evolution algorithm based on inhabitants preferences. The control of grown cells is obtained by means of suitable functions which depend on the initial condition of the simulation. New born urban settlements are achieved by means of a logistic evolution of the urban pattern while urban sprawl is controlled by means of the population evolution function. In order to compare model results with a realistic urban framework we have considered, as the area of study, the island of Capri (Italy) in the Mediterranean Sea. Two different phases of the urban evolution on the island have been taken into account: a new born initial growth as induced by geographic suitability and the simulation of urban spread after 1943 induced by the population evolution after this date.

Using WRF-Urban to Assess Summertime Air Conditioning Electric Loads and Their Impacts on Urban Weather in Beijing

NASA Astrophysics Data System (ADS)

Xu, Xiaoyu; Chen, Fei; Shen, Shuanghe; Miao, Shiguang; Barlage, Michael; Guo, Wenli; Mahalov, Alex

2018-03-01

The air conditioning (AC) electric loads and their impacts on local weather over Beijing during a 5 day heat wave event in 2010 are investigated by using the Weather Research and Forecasting (WRF) model, in which the Noah land surface model with multiparameterization options (Noah-MP) is coupled to the multilayer Building Effect Parameterization and Building Energy Model (BEP+BEM). Compared to the legacy Noah scheme coupled to BEP+BEM, this modeling system shows a better performance, decreasing the root-mean-square error of 2 m air temperature to 1.9°C for urban stations. The simulated AC electric loads in suburban and rural districts are significantly improved by introducing the urban class-dependent building cooled fraction. Analysis reveals that the observed AC electric loads in each district are characterized by a common double peak at 3 p.m. and at 9 p.m. local standard time, and the incorporation of more realistic AC working schedules helps reproduce the evening peak. Waste heat from AC systems has a smaller effect ( 1°C) on the afternoon 2 m air temperature than the evening one (1.5 2.4°C) if AC systems work for 24 h and vent sensible waste heat into air. Influences of AC systems can only reach up to 400 m above the ground for the evening air temperature and humidity due to a shallower urban boundary layer than daytime. Spatially varying maps of AC working schedules and the ratio of sensible to latent waste heat release are critical for correctly simulating the cooling electric loads and capturing the thermal stratification of urban boundary layer.

Migration and nutritional status of Tarahumara schoolchildren from Chihuahua State (México).

PubMed

Benítez-Hernández, Zuliana Paola; De la Torre-Díaz, María de Lourdes; Cervantes-Borunda, Mónica; Hernández-Torres, Rosa Patricia; Cabañas, María Dolores; López-Ejeda, Noemí; Marrodán, María Dolores

2017-01-01

The Tarahumara ethnic group is composed of indigenous people from the Sierra Madre Occidental of Mexico. Conditions of isolation and poverty compel them to migrate to the city in search of better opportunities. This work aims to explore the influence of migration on the growth and nutritional status of Tarahumara schoolchildren. One hundred Tarahumara students were analyzed (50 rural with a mean age of 9.78 ± 1.25 years; 50 urban aged 10.0 ± 1.04 years), comparing anthropometric indicators and body composition (T-Student, U-Mann-Whitney Tests). Twenty percent of rural girls and 35% of rural boys showed stunted growth compared to only 9% of the urban girls (no stunted growth among urban boys). Migrants showed greater body size, skinfold thickness, and fat percentage. Weight excess, understood as an increase in the prevalence of overweight and obesity, was detected in 17.8% of urban boys and 13.6% of urban girls compared to 10.0% of boys and 3.3% of girls of the rural series. Migration reduces stunting and increases adiposity. © 2016 Wiley Periodicals, Inc.

Measuring the past 20 years of urban-rural land growth in flood-prone areas in the developed Taihu Lake watershed, China

NASA Astrophysics Data System (ADS)

Su, Weizhong

2017-03-01

There is growing interest in using the urban landscape for stormwater management studies, where land patterns and processes can be important controls for the sustainability of urban development and planning. This paper proposes an original index of Major Hazard Oriented Level (MHOL) and investigates the structure distribution, driving factors, and controlling suggestions of urban-rural land growth in flood-prone areas in the Taihu Lake watershed, China. The MHOL of incremental urban-rural land increased from M 31.51 during the years 1985-1995 to M 38.37 during the years 1995-2010 (M for medium structure distribution, and the number for high-hazard value). The index shows that urban-rural land was distributed uniformly in flood hazard levels and tended to move rapidly to high-hazard areas, where 72.68% of incremental urban-rural land was aggregated maximally in new urban districts along the Huning traffic line and the Yangtze River. Thus, the current accelerating growth of new urban districts could account for the ampliative exposure to high-hazard areas. New districts are driven by the powerful link between land financial benefits and political achievements for local governments and the past unsustainable process of "single objective" oriented planning. The correlation categorical analysis of the current development intensity and carrying capacity of hydrological ecosystems for sub-basins was used to determine four types of development areas and provide decision makers with indications on the future watershed-scale subdivision of Major Function Oriented Zoning implemented by the Chinese government.

Optimal Disturbances in Boundary Layers Subject to Streamwise Pressure Gradient

NASA Technical Reports Server (NTRS)

Ashpis, David E.; Tumin, Anatoli

2003-01-01

An analysis of the non-modal growth of perturbations in a boundary layer in the presence of a streamwise pressure gradient is presented. The analysis is based on PSE equations for an incompressible fluid. Examples with Falkner- Skan profiles indicate that a favorable pressure gradient decreases the non-modal growth while an unfavorable pressure gradient leads to an increase of the amplification. It is suggested that the transient growth mechanism be utilized to choose optimal parameters of tripping elements on a low-pressure turbine (LPT) airfoil. As an example, a boundary-layer flow with a streamwise pressure gradient corresponding to the pressure distribution over a LPT airfoil is considered. It is shown that there is an optimal spacing of the tripping elements and that the transient growth effect depends on the starting point. The amplification is found to be small at the LPT s very low Reynolds numbers, but there is a possibility to enhance the transient energy growth by means of wall cooling.

Integrative assessment of climate change for fast-growing urban areas: Measurement and recommendations for future research

PubMed Central

Haase, Dagmar; Volk, Martin

2017-01-01

Over the 20th century, urbanization has substantially shaped the surface of Earth. With population rapidly shifting from rural locations towards the cities, urban areas have dramatically expanded on a global scale and represent crystallization points of social, cultural and economic assets and activities. This trend is estimated to persist for the next decades, and particularly the developing countries are expected to face rapid urban growth. The management of this growth will require good governance strategies and planning. By threatening the livelihoods, assets and health as foundations of human activities, another major global change contributor, climate change, became an equally important concern of stakeholders. Based on the climate trends observed over the 20th century, and a spatially explicit model of urbanization, this paper investigates the impacts of climate change in relation to different stages of development of urban areas, thus evolving a more integrated perspective on both processes. As a result, an integrative measure of climate change trends and impacts is proposed and estimated for urban areas worldwide. We show that those areas facing major urban growth are to a large extent also hotspots of climate change. Since most of these hotspots are located in the Global South, we emphasize the need for stakeholders to co-manage both drivers of global change. The presented integrative perspective is seen as a starting point to foster such co-management, and furthermore as a means to facilitate communication and knowledge exchange on climate change impacts. PMID:29232695

Integrative assessment of climate change for fast-growing urban areas: Measurement and recommendations for future research.

PubMed

Scheuer, Sebastian; Haase, Dagmar; Volk, Martin

2017-01-01

Over the 20th century, urbanization has substantially shaped the surface of Earth. With population rapidly shifting from rural locations towards the cities, urban areas have dramatically expanded on a global scale and represent crystallization points of social, cultural and economic assets and activities. This trend is estimated to persist for the next decades, and particularly the developing countries are expected to face rapid urban growth. The management of this growth will require good governance strategies and planning. By threatening the livelihoods, assets and health as foundations of human activities, another major global change contributor, climate change, became an equally important concern of stakeholders. Based on the climate trends observed over the 20th century, and a spatially explicit model of urbanization, this paper investigates the impacts of climate change in relation to different stages of development of urban areas, thus evolving a more integrated perspective on both processes. As a result, an integrative measure of climate change trends and impacts is proposed and estimated for urban areas worldwide. We show that those areas facing major urban growth are to a large extent also hotspots of climate change. Since most of these hotspots are located in the Global South, we emphasize the need for stakeholders to co-manage both drivers of global change. The presented integrative perspective is seen as a starting point to foster such co-management, and furthermore as a means to facilitate communication and knowledge exchange on climate change impacts.

Can nutrients alone shift a sedge meadow towards dominance by the invasive Typha × glauca

USGS Publications Warehouse

Woo, Isa; Zedler, Joy B.

2002-01-01

Where wetlands receive urban runoff, Typha spp. and other invasive plants often displace the native vegetation. We tested the ability of nutrients (N and P) to increase vegetative growth of T. × glauca(a hybrid of T. latifolia and T. angustifolia). In the greenhouse, 17 treatments revealed that T. × glauca required both N and P for growth, and total leaf length was most stimulated where a higher proportion of P was added (7N∶1P vs. 14N∶1P, with N constant and P changed), regardless of concentration (the High treatment was 4× the Low treatment). In Gardner Marsh (Madison, Wisconsin, USA), we set up 28 plots (1×6 m) that bisected the boundary between sedge meadow (graminoids) and T. × glauca, and we added a common lawn fertilizer (9N∶1P∶4K) at high (62.5 g/m2), medium (31.3 g/m2), low (15.6 g/m2), and control (0 g/m2) rates on five dates, with n=7 plots/treatment. After one growing season, fertilizer addition increased T. × glauca ramet density, height, and biomass, especially where the sedge meadow graminoids were initially dominant. Aboveground biomass of T. × glauca in the high nutrient addition treatment (1029±256.1 g/m2) was more than double that for control plots (431±80.52 g/m2) overall, with the greatest percent increase in sedge meadow subplots. In contrast, native graminoids (mostly Carex spp.) did not respond to treatment, either in biomass or percent cover. Typha × glauca allocated nutrients to both growth and storage, as indicated by higher N and P concentrations in leaves, shoot bases, and rhizomes in plots with high nutrient addition. Because fertilizing the marsh enhanced the shoot growth of T. × glauca but not native graminoids, and because the 7N∶1P treatment stimulated growth in the greenhouse, we suggest that wetland managers focus on reducing P inflows to urban wetlands. Fertilizer additions below those recommended by the manufacturer for new lawns (5× that of our highest treatment) should be more economical and have fewer impacts on receiving wetlands.

Remote Sensing and Spatial Growth Modeling Coupled with Air Quality Modeling to Assess the Impact of Atlanta, Georgia on the Local and Regional Environment

NASA Technical Reports Server (NTRS)

Quattrochi, Dale A.; Estes, Maurice G., Jr.; Crosson, William; Khan, Maudood

2006-01-01

The growth of cities, both in population and areal extent, appears as an inexorable process. Urbanization continues at a rapid rate, and it is estimated that by the year 2025, 80 percent of the world s population will live in cities. Directly aligned with the expansion of cities is urban sprawl. Urban expansion has profound impacts on a host of biophysical, environmental, and atmospheric processes. A reduction in air quality over cities is a major result of these impacts. Strategies that can be directly or indirectly implemented to help remediate air quality problems in cities and that can be accepted by political decision makers and the general public are now being explored to help bring down air pollutants and improve air quality. The urban landscape is inherently complex and this complexity is not adequately captured in air quality models, particularly the Community Multiscale Air Quality (CMAQ) model that is used to assess whether urban areas are in attainment of EPA air quality standards, primarily for ground level ozone. This inadequacy of the CMAQ model to sufficiently respond to the heterogeneous nature of the urban landscape can impact how well the model predicts ozone pollutant levels over metropolitan areas and ultimately, whether cities exceed EPA ozone air quality standards. We are exploring the utility of high-resolution remote sensing data and urban spatial growth modeling (SGM) projections as improved inputs to the meteorology component of the CMAQ model focusing on the Atlanta, Georgia metropolitan area as a case study. These growth projections include "business as usual" and "smart growth" scenarios out to 2030. The growth projections illustrate the effects of employing urban heat island mitigation strategies, such as increasing tree canopy and albedo across the Atlanta metro area, which in turn, are used to model how ozone and air temperature can potentially be moderated as impacts on elevating ground-level ozone, as opposed to not utilizing heat island mitigation strategies. The National Land Cover Dataset at 30m resolution is being used as the land use/land cover input and aggregated to the 4km scale for the MM5 mesoscale meteorological model and the (CMAQ) modeling schemes. Use of these data have been found to better characterize low density/suburban development as compared with USGS 1km land use/land cover data that have traditionally been used in modeling. Air quality prediction for future scenarios to 2030 is being facilitated by land use projections using a spatial growth model. Land use projections were developed using the 2030 Regional Transportation Plan developed by the Atlanta Regional Commission, the regional planning agency for the area. This allows the State Environmental Protection agency to evaluate how these transportation plans will affect future air quality. The coupled SGM and air quality modeling approach provides insight on what the impacts of Atlanta s growth will be on the local and regional environment and exists as a mechanism that can be used by policy makers to make rationale decisions on urban growth and sustainability for the metropolitan area in the future.

Urban vegetation and thermal patterns following city growth in different socio-economic contexts

NASA Astrophysics Data System (ADS)

Dronova, I.; Clinton, N.; Yang, J.; Radke, J.; Marx, S. S.; Gong, P.

2015-12-01

Urban expansion accompanied by losses of vegetated spaces and their ecological services raises significant concerns about the future of humans in metropolitan "habitats". Despite recent growth of urban studies globally, it is still not well understood how environmental effects of urbanization vary with the rate and socioeconomic context of development. Our study hypothesized that with urban development, spatial patterns of surface thermal properties and green plant cover would shift towards higher occurrence of relatively warmer and less vegetated spaces such as built-up areas, followed by losses of greener and cooler areas such as urban forests, and that these shifts would be more pronounced with higher rate of economic and/or population growth. To test these ideas, we compared 1992-2011 changes in remotely sensed patterns of green vegetation and surface temperature in three example cities that experienced peripheral growth under contrasting socio-economic context - Dallas, TX, USA, Beijing, China and Kyiv, Ukraine. To assess their transformation, we proposed a metric of thermal-vegetation angle (TVA) estimated from per-pixel proxies of vegetation greenness and surface temperature from Landsat satellite data and examined changes in TVA distributions within each city's core and two decadal zones of peripheral sprawl delineated from nighttime satellite data. We found that higher economic and population growth were coupled with more pronounced changes in TVA distributions, and more urbanized zones often exhibited higher frequencies of warmer, less green than average TVA values with novel patterns such as "cooler" clusters of building shadows. Although greener and cooler spaces generally diminished with development, they remained relatively prevalent in low-density residential areas of Dallas and peripheral zones of Kyiv with exurban subsistence farming. Overall, results indicate that the effects of modified green space and thermal patterns within growing cities highly vary depending on economy, population trends and historical legacies of planned green spaces. Remote sensing-based metrics such as TVA facilitate their comparisons and offer useful strategies to cost-effectively monitor urban transformation and inform more explicit environmental modeling of cities in the future.

Total Water Management - Report

EPA Science Inventory

There is a growing need for urban water managers to take a more holistic view of their water resource systems as population growth, urbanization, and current operations put different stresses on the environment and urban infrastructure. Total Water Management (TWM) is an approac...

Immersed Boundary Methods for High-Resolution Simulation of Atmospheric Boundary-Layer Flow Over Complex Terrain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lundquist, K A

Mesoscale models, such as the Weather Research and Forecasting (WRF) model, are increasingly used for high resolution simulations, particularly in complex terrain, but errors associated with terrain-following coordinates degrade the accuracy of the solution. Use of an alternative Cartesian gridding technique, known as an immersed boundary method (IBM), alleviates coordinate transformation errors and eliminates restrictions on terrain slope which currently limit mesoscale models to slowly varying terrain. In this dissertation, an immersed boundary method is developed for use in numerical weather prediction. Use of the method facilitates explicit resolution of complex terrain, even urban terrain, in the WRF mesoscale model.more » First, the errors that arise in the WRF model when complex terrain is present are presented. This is accomplished using a scalar advection test case, and comparing the numerical solution to the analytical solution. Results are presented for different orders of advection schemes, grid resolutions and aspect ratios, as well as various degrees of terrain slope. For comparison, results from the same simulation are presented using the IBM. Both two-dimensional and three-dimensional immersed boundary methods are then described, along with details that are specific to the implementation of IBM in the WRF code. Our IBM is capable of imposing both Dirichlet and Neumann boundary conditions. Additionally, a method for coupling atmospheric physics parameterizations at the immersed boundary is presented, making IB methods much more functional in the context of numerical weather prediction models. The two-dimensional IB method is verified through comparisons of solutions for gentle terrain slopes when using IBM and terrain-following grids. The canonical case of flow over a Witch of Agnesi hill provides validation of the basic no-slip and zero gradient boundary conditions. Specified diurnal heating in a valley, producing anabatic winds, is used to validate the use of flux (non-zero) boundary conditions. This anabatic flow set-up is further coupled to atmospheric physics parameterizations, which calculate surface fluxes, demonstrating that the IBM can be coupled to various land-surface parameterizations in atmospheric models. Additionally, the IB method is extended to three dimensions, using both trilinear and inverse distance weighted interpolations. Results are presented for geostrophic flow over a three-dimensional hill. It is found that while the IB method using trilinear interpolation works well for simple three-dimensional geometries, a more flexible and robust method is needed for extremely complex geometries, as found in three-dimensional urban environments. A second, more flexible, immersed boundary method is devised using inverse distance weighting, and results are compared to the first IBM approach. Additionally, the functionality to nest a domain with resolved complex geometry inside of a parent domain without resolved complex geometry is described. The new IBM approach is used to model urban terrain from Oklahoma City in a one-way nested configuration, where lateral boundary conditions are provided by the parent domain. Finally, the IB method is extended to include wall model parameterizations for rough surfaces. Two possible implementations are presented, one which uses the log law to reconstruct velocities exterior to the solid domain, and one which reconstructs shear stress at the immersed boundary, rather than velocity. These methods are tested on the three-dimensional canonical case of neutral atmospheric boundary layer flow over flat terrain.« less

Projected Impact of Urban Growth on Climate Change

NASA Astrophysics Data System (ADS)

Amato, Federico; Murgante, Beniamino; Martellozzo, Federico

2017-04-01

Human activities on land use such as intensive agricultural techniques and urbanization are generating a number of social and economic benefit for contemporary society. Besides, these phenomena are one of the most significant causes of Land Degradation. Firstly, intensive agriculture is on the one hand creating an advantage in the short-period in terms of food production, while on the other is producing serious long-period problems in terms of loss of ecosystem services, including some important for agriculture itself. Secondly, the rapid growth of urban areas in recent decades is generating deep environmental issues. The World Urbanization Prospect by the United Nations (UN) shows that more than half of the world's population today (54%) lives in urban areas. This figure was only 30% in 1950, and estimates are that it will rise to 66% by 2050. Urban growth is responsible for the increase of air pollution, waste production, energy consumption, and land take. Moreover, the expansion of urban areas is making the problem of urban heat islands more relevant, and studies are proving how land cover changes are among the main factors that affect local microclimates. Consequently, territorial planning will play an important role in the fight to mitigate the effects of climate change, as land cover has a significant impact on the energy exchanges between the earth and the atmosphere. This study couples urban growth simulation models based on cellular automata to multiple linear regression techniques that are used to formulate equations for predicting the effects of simulated urban development on soil surface temperature. The proposed methodology is applied to the case study of the Italian national territory, considering various alternative scenarios of land use changes and of their impact on local surface temperatures. The results show that the areas with the greatest urban pressure might be subject to significant climatic changes due to the increased impact of urban heat island phenomena. This highlights the need to take meaningful action to reverse the trends currently in place concerning the territorial government, with the purpose of creating a renewed political and social context that can reduce Land Degradation phenomena. These assumptions are considered essential to meet the new climate sustainability parameters introduced by the Paris Agreement signed in December 2015.

Water quantity and quality at the urban-rural interface

Treesearch

Ge Sun; B. Graeme Lockaby

2012-01-01

Population growth and urban development dramatically alter natural watershed ecosystem structure and functions and stress water resources. We review studies on the impacts of urbanization on hydrologic and biogeochemical processes underlying stream water quantity and water quality issues, as well as water supply challenges in an urban environment. We conclude that...

Gainesville's urban forest canopy cover

Treesearch

Francisco Escobedo; Jennifer A. Seitz; Wayne Zipperer

2009-01-01

Ecosystem benefits from trees are linked directly to the amount of healthy urban forest canopy cover. Urban forest cover is dynamic and changes over time due to factors such as urban development, windstorms, tree removals, and growth. The amount of a city's canopy cover depends on its land use, climate, and people's preferences. This fact sheet examines how...

Impacts of Urbanization on Flood and Soil Erosion Hazards in Istanbul, Turkey

ERIC Educational Resources Information Center

Ozacar, Biricik Gozde

2013-01-01

Due to the inappropriate planning and explosive population growth in urban areas, especially in developing countries, sustainable and disaster-safe urbanization has become the most important challenge for governments. Urbanization presents benefits in different ways but has led simultaneously to changes in land use/land cover (LULC), impacting…

Are autonomous cities our urban future?

PubMed

Norman, Barbara

2018-05-29

Cities are rapidly expanding in size, wealth and power, with some now larger than nation states. Smart city solutions and strong global urban networks are developing to manage massive urban growth. However, cities exist within a wider system and it may take more than technological advances, innovation and city autonomy to develop a sustainable urban future.

The southern megalopolis: using the past to predict the future of urban sprawl in the Southeast U.S.

USGS Publications Warehouse

Terando, Adam; Costanza, Jennifer; Belyea, Curtis; Dunn, Robert R.; McKerrow, Alexa; Collazo, Jaime

2014-01-01

The future health of ecosystems is arguably as dependent on urban sprawl as it is on human-caused climatic warming. Urban sprawl strongly impacts the urban ecosystems it creates and the natural and agro-ecosystems that it displaces and fragments. Here, we project urban sprawl changes for the next 50 years for the fast-growing Southeast U.S. Previous studies have focused on modeling population density, but the urban extent is arguably as important as population density per se in terms of its ecological and conservation impacts. We develop simulations using the SLEUTH urban growth model that complement population-driven models but focus on spatial pattern and extent. To better capture the reach of low-density suburban development, we extend the capabilities of SLEUTH by incorporating street-network information. Our simulations point to a future in which the extent of urbanization in the Southeast is projected to increase by 101% to 192%. Our results highlight areas where ecosystem fragmentation is likely, and serve as a benchmark to explore the challenging tradeoffs between ecosystem health, economic growth and cultural desires.

The Southern Megalopolis: Using the Past to Predict the Future of Urban Sprawl in the Southeast U.S

PubMed Central

Terando, Adam J.; Costanza, Jennifer; Belyea, Curtis; Dunn, Robert R.; McKerrow, Alexa; Collazo, Jaime A.

2014-01-01

The future health of ecosystems is arguably as dependent on urban sprawl as it is on human-caused climatic warming. Urban sprawl strongly impacts the urban ecosystems it creates and the natural and agro-ecosystems that it displaces and fragments. Here, we project urban sprawl changes for the next 50 years for the fast-growing Southeast U.S. Previous studies have focused on modeling population density, but the urban extent is arguably as important as population density per se in terms of its ecological and conservation impacts. We develop simulations using the SLEUTH urban growth model that complement population-driven models but focus on spatial pattern and extent. To better capture the reach of low-density suburban development, we extend the capabilities of SLEUTH by incorporating street-network information. Our simulations point to a future in which the extent of urbanization in the Southeast is projected to increase by 101% to 192%. Our results highlight areas where ecosystem fragmentation is likely, and serve as a benchmark to explore the challenging tradeoffs between ecosystem health, economic growth and cultural desires. PMID:25054329

Downscaling modelling system for multi-scale air quality forecasting

NASA Astrophysics Data System (ADS)

Nuterman, R.; Baklanov, A.; Mahura, A.; Amstrup, B.; Weismann, J.

2010-09-01

Urban modelling for real meteorological situations, in general, considers only a small part of the urban area in a micro-meteorological model, and urban heterogeneities outside a modelling domain affect micro-scale processes. Therefore, it is important to build a chain of models of different scales with nesting of higher resolution models into larger scale lower resolution models. Usually, the up-scaled city- or meso-scale models consider parameterisations of urban effects or statistical descriptions of the urban morphology, whereas the micro-scale (street canyon) models are obstacle-resolved and they consider a detailed geometry of the buildings and the urban canopy. The developed system consists of the meso-, urban- and street-scale models. First, it is the Numerical Weather Prediction (HIgh Resolution Limited Area Model) model combined with Atmospheric Chemistry Transport (the Comprehensive Air quality Model with extensions) model. Several levels of urban parameterisation are considered. They are chosen depending on selected scales and resolutions. For regional scale, the urban parameterisation is based on the roughness and flux corrections approach; for urban scale - building effects parameterisation. Modern methods of computational fluid dynamics allow solving environmental problems connected with atmospheric transport of pollutants within urban canopy in a presence of penetrable (vegetation) and impenetrable (buildings) obstacles. For local- and micro-scales nesting the Micro-scale Model for Urban Environment is applied. This is a comprehensive obstacle-resolved urban wind-flow and dispersion model based on the Reynolds averaged Navier-Stokes approach and several turbulent closures, i.e. k -ɛ linear eddy-viscosity model, k - ɛ non-linear eddy-viscosity model and Reynolds stress model. Boundary and initial conditions for the micro-scale model are used from the up-scaled models with corresponding interpolation conserving the mass. For the boundaries a kind of Dirichlet condition is chosen to provide the values based on interpolation from the coarse to the fine grid. When the roughness approach is changed to the obstacle-resolved one in the nested model, the interpolation procedure will increase the computational time (due to additional iterations) for meteorological/ chemical fields inside the urban sub-layer. In such situations, as a possible alternative, the perturbation approach can be applied. Here, the effects of main meteorological variables and chemical species are considered as a sum of two components: background (large-scale) values, described by the coarse-resolution model, and perturbations (micro-scale) features, obtained from the nested fine resolution model.

On the urban land-surface impact on climate over Central Europe

NASA Astrophysics Data System (ADS)

Huszar, Peter; Halenka, Tomas; Belda, Michal; Zemankova, Katerina; Zak, Michal

2014-05-01

For the purpose of qualifying and quantifying the impact of cities and in general the urban surfaces on climate over central Europe, the surface parameterization in regional climate model RegCM4 has been extended with the Single Layer Urban Canopy Model (SLUCM) for urban and suburban land surface. This can be used both in dynamic scale within BATS scheme and in a more detailed SUBBATS scale to treat the surface processes on a higher resolution subgrid. A set of experiments was performed over the period of 2005-2009 over central Europe, either without considering urban surfaces and with the SLUCM treatment. Results show a statistically significant impact of urbanized surfaces on temperature (up to 1.5 K increase in summer), on the boundary layer height (ZPBL, increases up to 50 m). Urbanization further influences surface wind with a winter decrease up to -0,6 m s-1 and both increases and decreases in summer depending the location with respect to cities and daytime (changes up to 0.3 ms-1). Urban surfaces significantly reduce evaporation and thus the humidity over the surface. This impacts in our simulations the summer precipitation rate showing decrease over cities up to - 2 mm day-1. We further showed, that significant temperature increases are not limited to the urban canopy layer but spawn the whole boundary layer. Above that, a small but statistically significant temperature decrease is modeled. The comparison with observational data showed significant improvement in modeling the monthly surface temperatures in summer and the models better describe the diurnal temperature variation reducing the afternoon and evening bias due to the UHI development, which was not captured by the model if one does not apply the urban parameterization. Sensitivity experiments were carried out as well to quantify the response of the meteorological conditions to changes in the parameters specific to the urban environment such as street width, building height, albedo of the roofs, anthropogenic heat release etc. and showed that the results are rather robust and the choice of the key SLUCM parameters impacts the results only slightly (mainly temperature, ZPBL and wind velocity). Further, the important conclusion is that statistically significant impacts are modeled not only over large urbanized areas (cities), but the influence of cities is evident over remote rural areas as well with minor or without any urban surfaces. We show that this is the result of the combined effect of the distant influence of surrounding cities and the influence of the minor local urban surface coverage.

Urban Cultural Heritage Endangerment: Degradation of historico-cultural landscapes

NASA Astrophysics Data System (ADS)

Vaz, Eric; Cabral, Pedro; Caetano, Mário; Painho, Marco; Nijkamp, Peter

2010-05-01

Sustainable development has become one of the great debates of policy-making of the XXI century. The world, is facing unprecedented change following the anthropocentrism of socio-economic growth. However, the commitment of man to ‘transmit to future generations at least the same as had' (ref) seems to be a narrowing, given extensive urban growth, population increase and climate change. However, over the last twenty years, the usage of spatial information systems have brought a positive contribution for better acknowledging the problem of environmental change, and bringing more constructive approaches to planning. Prompted by much research interest in Europe, a broad specter of biodiversity loss models, pollution and environmental degradation algorithms as well as climate change models, have become important tools under the European umbrella. Recognizing the essence of sustainable development, historico-cultural and archaeological regions have a remarkable role in the transformation of landscapes and maintenance of cultural and regional identity. Furthermore, the socio-economic, political-geographic and cultural-scientific history of the dynamics of places and localities on our earth is reflected in their historico-cultural heritage. This patrimony comprises cultural assets, such as old churches, palaces, museums, urban parks, historical architecture of cities, or landscapes of historical interest. Historico-cultural heritage also includes archaeological sites, which sometimes not only have a local value but may have a worldwide significance (e.g. Pompeii). However, massive urban growth is affecting directly the existing historico-cultural resources throughout the European region, and little attention is given to this juxtaposing reality of peri-urban growth and cultural / archaeological heritage preservation. Also, the settling patterns within historico-cultural local clusters follow a similar pattern as current growth tendencies, given the physical conditions of land-use. This brings forth a dichotomy between areas to cope with population increase (and therefore highly probable of urbanization) and regions of valuable historico-cultural and archaeological legacy. To bridge this dichotomy, this paper attempts to provide a methodology for measuring cultural heritage endangerment brought by urban pressure. By using spatial modeling to prompt urban growth combined with archaeological predictive models, composing a secondary layer, a propensity map for areas with extremely high cultural value and where urban growth should be dealt with especial care become evident. Fundamentally, the joined model of Cultural Heritage Endangerment, tackles a recent and unprecedented problem at global level: Committing urban planning to allow the conservation of cultural and archaeological legacy for future generation. In an attempt to abridge the consequences of the decadence of historico-cultural landscapes, the historico-cultural endangerment (HCE) method will be applied to two entirely different regions in the world. On one side, the methodology will be applied on a regional emphasis in the Algarve region in Portugal, addressing the input of maintaining the integrity of archaeological landscapes, and on the other, a local micro-simulation of the Giza Pyramids in Egypt, shall allow to envision a segment of local consequences of urban pressure on irreplaceable monuments. The conclusions of both study-cases abridge the global nature of this problem as well as the importance of HCE implementation at different scales.

Potential for use of environmental factors in urban planning

NASA Astrophysics Data System (ADS)

Teixeira da Silva, Ricardo; van der Ploeg, Martine; van Delden, Hedwig; Fleskens, Luuk

2016-04-01

Projections for population growth estimate, on top of the current 7.4 billion world population, an increase of 2 billion people for the next 40 years. It is also projected that 66 per cent of the world population in 2050 will live in urban areas. To accommodate the urban population growth cities are changing continuously land cover to urban areas. Such changes are a threat for natural resources and food production systems stability and capability to provide food and other functions. However, little has been done concerning a rational soil management for food production in urban and peri-urban areas. This study focuses on the assessment of soil lost due to urban expansion and discusses the potential loss regarding the quality of the soil for food production and environmental functions. It is relevant to increase the knowledge on the role of soils in peri-urban areas and in the interaction of physical, environmental and social factors. The methodology consists of assessing the soil quality in and around urban and peri-urban areas. It focuses particularly on the physical properties and the environmental factors, for two periods of time and account the potential losses due to urban expansion. This project is on-going, therefore current advances will be presented and will look for a discussion on the contribution of soil quality for decision-making and land management in urban and peri-urban areas.

A New Ghost Cell/Level Set Method for Moving Boundary Problems: Application to Tumor Growth

PubMed Central

Macklin, Paul

2011-01-01

In this paper, we present a ghost cell/level set method for the evolution of interfaces whose normal velocity depend upon the solutions of linear and nonlinear quasi-steady reaction-diffusion equations with curvature-dependent boundary conditions. Our technique includes a ghost cell method that accurately discretizes normal derivative jump boundary conditions without smearing jumps in the tangential derivative; a new iterative method for solving linear and nonlinear quasi-steady reaction-diffusion equations; an adaptive discretization to compute the curvature and normal vectors; and a new discrete approximation to the Heaviside function. We present numerical examples that demonstrate better than 1.5-order convergence for problems where traditional ghost cell methods either fail to converge or attain at best sub-linear accuracy. We apply our techniques to a model of tumor growth in complex, heterogeneous tissues that consists of a nonlinear nutrient equation and a pressure equation with geometry-dependent jump boundary conditions. We simulate the growth of glioblastoma (an aggressive brain tumor) into a large, 1 cm square of brain tissue that includes heterogeneous nutrient delivery and varied biomechanical characteristics (white matter, gray matter, cerebrospinal fluid, and bone), and we observe growth morphologies that are highly dependent upon the variations of the tissue characteristics—an effect observed in real tumor growth. PMID:21331304

On the effect of boundary layer growth on the stability of compressible flows

NASA Technical Reports Server (NTRS)

El-Hady, N. M.

1981-01-01

The method of multiple scales is used to describe a formally correct method based on the nonparallel linear stability theory, that examines the two and three dimensional stability of compressible boundary layer flows. The method is applied to the supersonic flat plate layer at Mach number 4.5. The theoretical growth rates are in good agreement with experimental results. The method is also applied to the infinite-span swept wing transonic boundary layer with suction to evaluate the effect of the nonparallel flow on the development of crossflow disturbances.

Characterizing continuous urban growth using composited time-series Landsat data

NASA Astrophysics Data System (ADS)

Song, X. P.; Sexton, J. O.; Huang, C.; Feng, M.; Channan, S.; Baker, M. E.; Townshend, J. R.

2014-12-01

Impervious surfaces are land cover features through which water cannot penetrate into the soil. As an indicator of urban land use, impervious surface cover (ISC) is disproportionally important to human beings-although covering only 0.5% of the Earth's terrestrial surface, cities support over 50% the Earth's population. The increasing demand for built-up space by a growing urban population has been driving land use change in urban areas worldwide. An increase in ISC can significantly impact the biophysical characteristics of land surface, such as altering the local surface energy balance, or transforming regional hydrological systems. Remotely sensed data is commonly used as the primary data source for extracting impervious surface information for monitoring urban growth, but current studies often lack the sufficient temporal resolution or thematic detail to reveal the long-term, nonlinear development of impervious surfaces over time. In a previous study (Sexton et al. 2013), we created an annual stack of 30-m percent ISC estimates for the Washington DC-Baltimore metropolitan region from 1984 to 2010 by compositing all available Landsat images in the USGS archive. Here we developed a robust time-series method to detect impervious surface change. The method employs a customized logistic function for every pixel to model the continuous process of urban growth. It quantifies the fractional intensity of ISC change at the sub-pixel level and also characterizes the timing and length (in years) of urban development. The new method detects change based on a sequence of observations before, during and after change and thus is highly resistant to random noises. Our results showed that the DC-Baltimore metropolitan region experienced an accelerated growth pathway from the late 1980s to the late 2000s. The majority of urban and sub-urban development occurred at scales finer than the Landsat resolution (30 m), with a region-wide mean intensity of 46% ISC increase. Our study demonstrates the value of the long-term and fine temporal resolution data offered by the Landsat archive, and also highlights the possible limitations of Landsat's spatial resolution in characterizing continuous urban development.

Growth rate models for short surface cracks in AI 2219-T851

NASA Astrophysics Data System (ADS)

Morris, W. L.; James, M. R.; Buck, O.

1981-01-01

Rates of fatigue propagation of short Mode I surface cracks in Al 2219-T851 are measured as a function of crack length and of the location of the surface crack tips relative to the grain boundaries. The measured rates are then compared to values predicted from crack growth models. The crack growth rate is modeled with an underlying assumption that slip responsible for early propagation does not extend in significant amounts beyond the next grain boundary in the direction of crack propagation. Two models that contain this assumption are combined: 1) cessation of propagation into a new grain until a mature plastic zone is developed; 2) retardation of propagation by crack closure stress, with closure stress calculated from the location of a crack tip relative to the grain boundary. The transition from short to long crack growth behavior is also discussed.

On the Creation of An Urban Boundary Layer Product Using The Radar Wind Profiler of the New York City Meteorological Network

NASA Astrophysics Data System (ADS)

Dempsey, M. J.; Booth, J.; Arend, M.; Melecio-Vazquez, D.

2016-12-01

The radar wind profiler (RWP) located on the Liberty Science Center in Jersey City, NJ is a part of the New York City Meteorological Network (NYCMetNet). An automatic algorithm based on those by Angevine [1] and Molod [2] is expanded upon and implemented to take RWP signal to noise ratio data and create an urban boundary layer (UBL) height product. Time series of the RWP UBL heights from clear and cloudy days are examined and compared to UBL height time series calculated from thermal data obtained from a NYCMetNet radiometer located on the roof of the Grove School of Engineering at The City College of New York. UBL data from the RWP are also compared to the MERRA (Modern Era Retrospective Analysis for Research and Applications) planetary boundary layer height time series product. A limited seasonal climatology is created from the available RWP data for clear and cloudy days and then compared to a limited seasonal climatology produced from boundary layer data obtained from MERRA and boundary layer data calculated from the CCNY radiometer. As with wind profilers in the NOAA wind profiler network, the signal return to the lowest range gates is not always the result of turbulent scattering, but from scattering from other targets such as the building itself, birds and insects. The algorithm attempts to address this during the daytime, when strong signal returns at the lowest range gates mask the SNR maxima above which are representative of the actual UBL height. Detecting the collapse and fall of the boundary layer meets with limited success, also, from the hours of 2:30pm to 5:00pm. Upper and lower range gates from the wind profiler limit observation of the nighttime boundary layer for heights falling below the lowest range gate and daytime convective boundary layer maxima rising above the highest. Due to the constraints of the instrument and the algorithm it is recommended that the boundary layer height product be constrained to the hours of 8am to 7pm.

A model of urban rational growth based on grey prediction

NASA Astrophysics Data System (ADS)

Xiao, Wenjing

2017-04-01

Smart growth focuses on building sustainable cities, using compact development to prevent urban sprawl. This paper establishes a series of models to implement smart growth theories into city design. Besides two specific city design cases are shown. Firstly, We establishes Smart Growth Measure Model to measure the success of smart growth of a city. And we use Full Permutation Polygon Synthetic Indicator Method to calculate the Comprehensive Indicator (CI) which is used to measure the success of smart growth. Secondly, this paper uses the principle of smart growth to develop a new growth plan for two cities. We establish an optimization model to maximum CI value. The Particle Swarm Optimization (PSO) algorithm is used to solve the model. Combined with the calculation results and the specific circumstances of cities, we make their the smart growth plan respectively.

Prediction of future urban growth using CA-Markov for urban sustainability planning of Banda Aceh, Indonesia

NASA Astrophysics Data System (ADS)

Achmad, A.; Irwansyah, M.; Ramli, I.

2018-03-01

Banda Aceh experienced rapid growth, both physically, socially, and economically, after the Tsunami that devastated it the end of December in 2004. Hence policy controls are needed to direct the pattern of urban growth to achieve sustainable development for the future. The purpose of this paper is to generate a growth model for Banda Aceh using the CA-Markov process. By knowing the changes in land use between 2005 and 2009 from the results of previous research, simulations for 2013, 2019 and 2029 using the application of Idrisi@Selva. CA-Markov models were prepared to determine the quantity of changes. The simulation results showed that, after the Tsunami, the City of Banda Aceh tended to grow towards the coast. For the control of the LUC, the Banda Aceh City government needs to prepare comprehensive and detailed maps and inventory of LUC for the city to provide basic data and information needed for monitoring and evaluation that can be done effectively and efficiently. An institution for monitoring and evaluation of the urban landscape and the LUC should be formed immediately. This institution could consist of representatives from government, academia, community leaders, the private sector and other experts. The findings from this study can be used to start the monitoring and evaluation of future urban growth. Especially for the coastal areas, the local government should immediately prepare special spatial coastal area plans to control growth in those areas and to ensure that the economic benefits from disaster mitigation and coastal protection are preserved. For the development of the city in the future, it is necessary to achieve a balance between economic development, and social welfare with environmental protection and disaster mitigation. iIt will become a big challenge to achieve sustainable development for the future.

Studying the urban thermal environment under a human-biometeorological point of view: The case of a large coastal metropolitan city, Athens

NASA Astrophysics Data System (ADS)

Katavoutas, George; Georgiou, Giorgos K.; Asimakopoulos, Dimosthenis N.

2015-01-01

The thermal environment in modern cities has become potentially unfavorable and harmful for its residents, as a result of urbanization and industrialization. Exposure to these extreme thermal conditions increases the heat stress of people in cities considerably. In this context, the present study aims to investigate the urban thermal environment of the large coastal metropolitan city of Athens, in a human-biometeorologically significant way, utilizing the thermo-physiological assessment index PET. The analysis was based on three hour measurements derived from three-year datasets (2006-2009), at 12 monitoring sites located in the urban complex of Athens, on its boundaries and beyond them. The differences of PET values have been investigated in order to attribute urban and exurban thermal characteristics to the considered sites. The frequency and spatial distribution of PET as well as the urban/rural differences of PET have also been analyzed. Finally, a trend analysis has been applied in order to detect possible PET trends by employing long-term recording data (1985-2008). In terms of thermal human-biometeorological conditions, the analysis reveals that among the considered stations, those located inside the urban complex and the industrialized area present urban thermal characteristics, regardless the fact that they are installed either in a park and on a hill or at an open field. The spatial distribution of PET, at 0200 LST, shows a difference of about 3 to 4 °C, on the main axis of the city (SSW-NNE) in the summer period, while the difference exceeds 2.5 °C in the winter period. In general, cooler (less warm) thermal perception is observed at the north/northeast sites of the city as well as at the areas beyond the eastern boundaries of it. The PET differences between urban and rural sites hold a positive sign, except of those at 0500 LST and at 0800 LST. The highest differences are noted at 1400 LST and the most intense of them is noticed in the summer period (exceeds 5 °C). The trend analysis reveals statistically significant increasing heat stress for certain stations and months.

The Growth and Structure of Cities Program: An Innovative Approach to Urban Studies.

ERIC Educational Resources Information Center

Bryn Mawr Coll., PA.

The long term aims of the Growth and Structure of Cities major at Bryn Mawr College are to introduce into the curriculum an interdisciplinary program which builds on existing strengths within the college and which offers students the opportunity to study the changing character of the contemporary urban environment in an historical, aesthetic, and…

Houston's Regional Forest

Treesearch

David J. Nowak; Peter D. Smith; Michael Merritt; John Giedraitis; Jeffrey T. Walton; Robert E. Hoehn; Jack C. Stevens; Daniel E. Crane; Mark Estes; Stephen Stetson; Charles Burditt; David Hitchcock; Wendee Holtcamp

2005-01-01

The population in and around Houston has grown rapidly over the past twenty years, now exceeding five million people. Studies of the area have noted that the loss of trees and changes to the forest makeup have generally accompanied this growth. Trees and urban forestry practices can be used effectively to reduce many of the negative effects of urban growth and other...

Smart Growth for a Sustainable Urban Environment - Concepts and Practice in US and China (CLASS PRESENTATION)

EPA Science Inventory

This is an invited seminar to a class of undergraduate and graduate students at DAAP of the University of Cincinnati. It provides students the concepts and trends in smart growth and sustainable urban development in U.S. and China. The materials are drawn from my research and m...

Automated Geospatial Watershed Assessment Tool (AGWA): Applications for Assessing the Impact of Urban Growth and the use of Low Impact Development Practices.

EPA Science Inventory

New tools and functionality have been incorporated into the Automated Geospatial Watershed Assessment Tool (AGWA) to assess the impact of urban growth and evaluate the effects of low impact development (LID) practices. AGWA (see: www.tucson.ars.ag.gov/agwa or http://www.epa.gov...

Strategies for Balanced Rural-Urban Growth. Agricultural Information Bulletin No. 392.

ERIC Educational Resources Information Center

Edwards, Clark

Summarizing an Economic Research Service (ERS) publication, this guide to a balanced rural-urban growth describes the results of a computer based ERS model which examined seven strategies to improve rural economic development. Based on 1960-70 trends, the model is described as asking how much would be required of each of the following strategies…

The inter-relationships between urban dynamics and water resource and supply based on multitemporal analysis

NASA Astrophysics Data System (ADS)

Aldea, Alexandru; Aldea, Mihaela

2016-08-01

The growth and concentration of population, housing and industry in urban and suburban areas in the continuous evolution of a city over time causes complex social, economic, and physical challenges. The population and its relationship with the use and development of the land and water is a critical issue of urban growth, and since ancient times land, water and man were directly involved in the human populations' survival. Nevertheless the current potential of study over this relationship between urban growth, water supply, drainage and water resources conditions becomes more and more attractive due to the possibility to make use of the broader variety of information sources and technologies readily available in recent years, with emphasis on the open data and on the big data as primary sources. In this regard we present some new possibilities of analyses over the demographics, land use/land cover and water supply and conservation based on a study over a Romanian region of development (Bucharest-Ilfov). As urban development usually outgrows the existing water supply systems, the resolution consists in drilling new and deeper wells, building new water distribution pipelines, building longer aqueducts and larger reservoirs, or finding new sources and constructing completely new water supply systems, water supplies may evolve this way from a result into a cause and driver of urban growth. The evolution trends of the studied area was estimated based on the open satellite time-series imagery and remote sensing techniques by land use/land cover extraction and the identification of the changes in urbanization. The survey is mainly focused on the expansion of the water network in terms of areal, total length and number of connections correlated with the amount of water produced, consumed and lost within a supply zone. Some urban human activities including the industrial ones alter water resource by pollution, over pumping of groundwater, construction of dams and reservoirs. In areas of rapid growth the worse problems came from the inadequate amount of potable water, the continuous deterioration of water quality and the slow progress in the water resources management and supply. The effects of urban dynamics over the water use and sustainability deserves an increasing study over the recent history in order to provide for an optimal management of the interrelationships between them.

Effects of urbanization on carnivore species distribution and richness

USGS Publications Warehouse

Ordenana, Miguel A.; Crooks, Kevin R.; Boydston, Erin E.; Fisher, Robert N.; Lyren, Lisa M.; Siudyla, Shalene; Haas, Christopher D.; Harris, Sierra; Hathaway, Stacie A.; Turschak, Greta M.; Miles, A. Keith; Van Vuren, Dirk H.

2010-01-01

Urban development can have multiple effects on mammalian carnivore communities. We conducted a meta-analysis of 7,929 photographs from 217 localities in 11 camera-trap studies across coastal southern California to describe habitat use and determine the effects of urban proximity (distance to urban edge) and intensity (percentage of area urbanized) on carnivore occurrence and species richness in natural habitats close to the urban boundary. Coyotes (Canis latrans) and bobcats (Lynx rufus) were distributed widely across the region. Domestic dogs (Canis lupus familiaris), striped skunks (Mephitis mephitis), raccoons (Procyon lotor), gray foxes (Urocyon cinereoargenteus), mountain lions (Puma concolor), and Virginia opossums (Didelphis virginiana) were detected less frequently, and long-tailed weasels (Mustela frenata), American badgers (Taxidea taxus), western spotted skunks (Spilogale gracilis), and domestic cats (Felis catus) were detected rarely. Habitat use generally reflected availability for most species. Coyote and raccoon occurrence increased with both proximity to and intensity of urbanization, whereas bobcat, gray fox, and mountain lion occurrence decreased with urban proximity and intensity. Domestic dogs and Virginia opossums exhibited positive and weak negative relationships, respectively, with urban intensity but were unaffected by urban proximity. Striped skunk occurrence increased with urban proximity but decreased with urban intensity. Native species richness was negatively associated with urban intensity but not urban proximity, probably because of the stronger negative response of individual species to urban intensity.

Population, migration and urbanization.

PubMed

1982-06-01

Despite recent estimates that natural increase is becoming a more important component of urban growth than rural urban transfer (excess of inmigrants over outmigrants), the share of migration in the total population growth has been consistently increasing in both developed and developing countries. From a demographic perspective, the migration process involves 3 elements: an area of origin which the mover leaves and where he or she is considered an outmigrant; the destination or place of inmigration; and the period over which migration is measured. The 2 basic types of migration are internal and international. Internal migration consists of rural to urban migration, urban to urban migration, rural to rural migration, and urban to rural migration. Among these 4 types of migration various patterns or processes are followed. Migration may be direct when the migrant moves directly from the village to the city and stays there permanently. It can be circular migration, meaning that the migrant moves to the city when it is not planting season and returns to the village when he is needed on the farm. In stage migration the migrant makes a series of moves, each to a city closer to the largest or fastest growing city. Temporary migration may be 1 time or cyclical. The most dominant pattern of internal migration is rural urban. The contribution of migration to urbanization is evident. For example, the rapid urbanization and increase in urban growth from 1960-70 in the Republic of Korea can be attributed to net migration. In Asia the largest component of the population movement consists of individuals and groups moving from 1 rural location to another. Recently, because urban centers could no longer absorb the growing number of migrants from other places, there has been increased interest in the urban to rural population redistribution. This reverse migration also has come about due to slower rates of employment growth in the urban centers and improved economic opportunities in rural areas. According to UN data, at the global level the trend in longterm and permanent migration is towards stabilization or decline in the rate of movement into developed countries like the US, Canada, the UK, and Australia from developing countries. Migrants in the Asian and Pacific region mostly tend to be in the 15-25 year age group. Most migrants streams are male dominant. The rural urban migration stream includes a large proportion of people who are better educated than their rural counterparts but generally less educated than the urban natives. Reasons for migrating in the Asian and Pacific region are economic, educational, sociocultural and political. A negative factor in rural migration is that it deprives villages of the ablest people.

Metropolization Process for enhancing local and regional planning : an experience of cirebon metropolitan, West Java

NASA Astrophysics Data System (ADS)

Supriyadi Rustidja, E.

2018-03-01

Metropolitan develops in line with resource utilization, investment, and transactions of regional activities. Metropolization of an area gives emerge urban economy that changes the situation, form, and pattern of urban space interactions. On the other hand, metropolism concerns the strategy of changing variation of urban space, so that metropolitan invasion not only form of urban space but also the process of interaction among stakeholders in developing metropolitan area. Based on participatory research, this article explores metropolitan invasion process for enhancing local and regional planning, both indigenous and intrusive cataclysmic. The study find that the primeval, rural, and urban as elemental environment must be considered in developing metropolitan, not merely form the structure and pattern of urban space. The metropolization process also requires the strategic of rural urban linkage, context setting and local assessment, strategic community investment, and interculturalist approach. The other findings of the study show that metropolization in Cirebon Metropolitan, West Java emphasizing on promotion of competitiveness strategy, value chain urban activities, and networking of urban areas. Cirebon Metropolitan must promote the realization of growth centers and connect the interregional activities of metropolitan area for providing sustainable economic growth.

WSN system design by using an innovative neural network model to perform thermals forecasting in a urban canyon scenario

NASA Astrophysics Data System (ADS)

Giuseppina, Nicolosi; Salvatore, Tirrito

2015-12-01

Wireless Sensor Networks (WSNs) were studied by researchers in order to manage Heating, Ventilating and Air-Conditioning (HVAC) indoor systems. WSN can be useful specially to regulate indoor confort in a urban canyon scenario, where the thermal parameters vary rapidly, influenced by outdoor climate changing. This paper shows an innovative neural network approach, by using WSN data collected, in order to forecast the indoor temperature to varying the outdoor conditions based on climate parameters and boundary conditions typically of urban canyon. In this work more attention will be done to influence of traffic jam and number of vehicles in queue.

Estimate of Boundary-Layer Depth Over Beijing, China, Using Doppler Lidar Data During SURF-2015

NASA Astrophysics Data System (ADS)

Huang, Meng; Gao, Zhiqiu; Miao, Shiguang; Chen, Fei; LeMone, Margaret A.; Li, Ju; Hu, Fei; Wang, Linlin

2017-03-01

Planetary boundary-layer (PBL) structure was investigated using observations from a Doppler lidar and the 325-m Institute of Atmospheric Physics (IAP) meteorological tower in the centre of Beijing during the summer 2015 Study of Urban-impacts on Rainfall and Fog/haze (SURF-2015) field campaign. Using six fair-weather days of lidar and tower data under clear to cloudy skies, we evaluate the ability of the Doppler lidar to probe the urban boundary-layer structure, and then propose a composite method for estimating the diurnal cycle of the PBL depth using the Doppler lidar. For the convective boundary layer (CBL), a threshold method using vertical velocity variance (σ _w^2 >0.1 m2s^{-2}) is used, since it provides more reliable CBL depths than a conventional maximum wind-shear method. The nocturnal boundary-layer (NBL) depth is defined as the height at which σ _w^2 decreases to 10 % of its near-surface maximum minus a background variance. The PBL depths determined by combining these methods have average values ranging from ≈ 270 to ≈ 1500 m for the six days, with the greatest maximum depths associated with clear skies. Release of stored and anthropogenic heat contributes to the maintenance of turbulence until late evening, keeping the NBL near-neutral and deeper at night than would be expected over a natural surface. The NBL typically becomes more shallow with time, but grows in the presence of low-level nocturnal jets. While current results are promising, data over a broader range of conditions are needed to fully develop our PBL-depth algorithms.

Modeling Global Urbanization Supported by Nighttime Light Remote Sensing

NASA Astrophysics Data System (ADS)

Zhou, Y.

2015-12-01

Urbanization, a major driver of global change, profoundly impacts our physical and social world, for example, altering carbon cycling and climate. Understanding these consequences for better scientific insights and effective decision-making unarguably requires accurate information on urban extent and its spatial distributions. In this study, we developed a cluster-based method to estimate the optimal thresholds and map urban extents from the nighttime light remote sensing data, extended this method to the global domain by developing a computational method (parameterization) to estimate the key parameters in the cluster-based method, and built a consistent 20-year global urban map series to evaluate the time-reactive nature of global urbanization (e.g. 2000 in Fig. 1). Supported by urban maps derived from nightlights remote sensing data and socio-economic drivers, we developed an integrated modeling framework to project future urban expansion by integrating a top-down macro-scale statistical model with a bottom-up urban growth model. With the models calibrated and validated using historical data, we explored urban growth at the grid level (1-km) over the next two decades under a number of socio-economic scenarios. The derived spatiotemporal information of historical and potential future urbanization will be of great value with practical implications for developing adaptation and risk management measures for urban infrastructure, transportation, energy, and water systems when considered together with other factors such as climate variability and change, and high impact weather events.

Change in Environmental Benefits of Urban Land Use and Its Drivers in Chinese Cities, 2000–2010

PubMed Central

Song, Xiaoqing; Chang, Kang-tsung; Yang, Liang; Scheffran, Jürgen

2016-01-01

Driven by rising income and urban population growth, China has experienced rapid urban expansion since the 1980s. Urbanization can have positive effects on the urban environment; however, improvement of urban environment quality, especially its divergence between relatively developed and undeveloped cities in China, is currently a rather rudimentary and subjective issue. This study analyzed urban environmental benefits among China’s prefectural cities based on their structure of urban land use in 2000 and 2010. First, we divided 347 prefectural cities into two groups, 81 coastal and capital cities in the relatively developed group (RD) and 266 other prefectural cities in the undeveloped group (RP). Then, we defined three areas of urban environmental benefits, including green infrastructure, industrial upgrade, and environmental management, and developed an assessment index system. Results showed that all prefectural cities saw improvement in urban environmental quality in 2000–2010. Although the RD cities had higher income and more population growth, they had less improvement than the RP cities during the same period. We also found that demographic and urban land agglomeration among RD cities restrained green infrastructure expansion, making green infrastructure unsuitable as a permanent solution to environmental improvement. It is therefore urgent for China to promote balanced improvement among the three areas of urban environmental benefits and between the RD and RP cities through regional differentiation policies. PMID:27240386

Change in Environmental Benefits of Urban Land Use and Its Drivers in Chinese Cities, 2000-2010.

PubMed

Song, Xiaoqing; Chang, Kang-Tsung; Yang, Liang; Scheffran, Jürgen

2016-05-26

Driven by rising income and urban population growth, China has experienced rapid urban expansion since the 1980s. Urbanization can have positive effects on the urban environment; however, improvement of urban environment quality, especially its divergence between relatively developed and undeveloped cities in China, is currently a rather rudimentary and subjective issue. This study analyzed urban environmental benefits among China's prefectural cities based on their structure of urban land use in 2000 and 2010. First, we divided 347 prefectural cities into two groups, 81 coastal and capital cities in the relatively developed group (RD) and 266 other prefectural cities in the undeveloped group (RP). Then, we defined three areas of urban environmental benefits, including green infrastructure, industrial upgrade, and environmental management, and developed an assessment index system. Results showed that all prefectural cities saw improvement in urban environmental quality in 2000-2010. Although the RD cities had higher income and more population growth, they had less improvement than the RP cities during the same period. We also found that demographic and urban land agglomeration among RD cities restrained green infrastructure expansion, making green infrastructure unsuitable as a permanent solution to environmental improvement. It is therefore urgent for China to promote balanced improvement among the three areas of urban environmental benefits and between the RD and RP cities through regional differentiation policies.

Integrated Modelling in CRUCIAL Science Education

NASA Astrophysics Data System (ADS)

Mahura, Alexander; Nuterman, Roman; Mukhamedzhanova, Elena; Nerobelov, Georgiy; Sedeeva, Margarita; Suhodskiy, Alexander; Mostamandy, Suleiman; Smyshlyaev, Sergey

2017-04-01

The NordForsk CRUCIAL project (2016-2017) "Critical steps in understanding land surface - atmosphere interactions: from improved knowledge to socioeconomic solutions" as a part of the Pan-Eurasian EXperiment (PEEX; https://www.atm.helsinki.fi/peex) programme activities, is looking for a deeper collaboration between Nordic-Russian science communities. In particular, following collaboration between Danish and Russian partners, several topics were selected for joint research and are focused on evaluation of: (1) urbanization processes impact on changes in urban weather and climate on urban-subregional-regional scales and at contribution to assessment studies for population and environment; (2) effects of various feedback mechanisms on aerosol and cloud formation and radiative forcing on urban-regional scales for better predicting extreme weather events and at contribution to early warning systems, (3) environmental contamination from continues emissions and industrial accidents for better assessment and decision making for sustainable social and economic development, and (4) climatology of atmospheric boundary layer in northern latitudes to improve understanding of processes, revising parameterizations, and better weather forecasting. These research topics are realized employing the online integrated Enviro-HIRLAM (Environment - High Resolution Limited Area Model) model within students' research projects: (1) "Online integrated high-resolution modelling of Saint-Petersburg metropolitan area influence on weather and air pollution forecasting"; (2) "Modeling of aerosol impact on regional-urban scales: case study of Saint-Petersburg metropolitan area"; (3) "Regional modeling and GIS evaluation of environmental pollution from Kola Peninsula sources"; and (4) "Climatology of the High-Latitude Planetary Boundary Layer". The students' projects achieved results and planned young scientists research training on online integrated modelling (Jun 2017) will be presented and discussed.

Using the LCZ framework for change detection and urban growth monitoring

NASA Astrophysics Data System (ADS)

Danylo, Olha; See, Linda; Gomez, Adriana; Schnabel, Georg; Fritz, Steffen

2017-04-01

The world's population reached 7.3 billion in 2015 and it is projected to increase further to 9.7 billion by 2050. Population growth is strongly linked to city expansion, as many people are moving from rural to urban areas. In order to enhance inclusive and sustainable urbanization, we need an efficient workflow for assessing the corresponding SDG (Sustainable Development Goal) targets. In this study we investigate how the Local Climate Zone (LCZ) classification framework can be used for monitoring sustainable urbanization and assess the availability of adequate and safe housing. The original LCZ classification system consists of 10 urban classes, which can be characterized by urban structure, the type of roads and buildings, the density of the built-up area, etc. The other seven classes in the classification scheme include natural land cover classes that do not contain any buildings (e.g., forest, low vegetation, bare land, water, etc). As a case study area we have chosen the cities of Johannesburg and Pretoria in South Africa. According to the 2011 Census, the population of Gauteng province (which includes both Johannesburg and Pretoria) increased by 32.55% compared to 2001 Census and reached 12 million in 2011. A large number of people live in slums and informal housing, which makes this area relevant for such an analysis. Using available satellite images for different years, we classified the case-study areas into the main LCZ classes, including the lightweight lowrise building zone, which corresponds to informal housing. We estimated the land use efficiency as the ratio of the land consumption rate to the population growth rate to illustrate how the LCZ framework can be applied to the assessment of urban growth and to help understand the trajectories of the changes in the urban environment. We show that a low value of this ratio does not necessarily indicate sustainable city expansion, but may instead signal a growing population density in the slum areas.

Twin-mediated crystal growth: an enigma resolved

PubMed Central

Shahani, Ashwin J.; Gulsoy, E. Begum; Poulsen, Stefan O.; Xiao, Xianghui; Voorhees, Peter W.

2016-01-01

During crystal growth, faceted interfaces may be perturbed by defects, leading to a rich variety of polycrystalline growth forms. One such defect is the coherent Σ3 {111} twin boundary, which is widely known to catalyze crystal growth. These defects have a profound effect on the properties of many materials: for example, electron-hole recombination rates strongly depend on the character of the twin boundaries in polycrystalline Si photovoltaic cells. However, the morphology of the twinned interface during growth has long been a mystery due to the lack of four-dimensional (i.e., space and time resolved) experiments. Many controversial mechanisms have been proposed for this process, most of which lack experimental verification. Here, we probe the real-time interfacial dynamics of polycrystalline Si particles growing from an Al-Si-Cu liquid via synchrotron-based X-ray tomography. Our novel analysis of the time evolution of the interfacial normals allows us to quantify unambiguously the habit plane and grain boundary orientations during growth. This, when combined with direct measurements of the interfacial morphology provide the first confirmation of twin-mediated growth, proposed over 50 years ago. Using the insights provided by these experiments, we have developed a unified picture of the phenomena responsible for the dynamics of faceted Si growth. PMID:27346073

Twin-mediated crystal growth: an enigma resolved

NASA Astrophysics Data System (ADS)

Shahani, Ashwin J.; Gulsoy, E. Begum; Poulsen, Stefan O.; Xiao, Xianghui; Voorhees, Peter W.

2016-06-01

During crystal growth, faceted interfaces may be perturbed by defects, leading to a rich variety of polycrystalline growth forms. One such defect is the coherent Σ3 {111} twin boundary, which is widely known to catalyze crystal growth. These defects have a profound effect on the properties of many materials: for example, electron-hole recombination rates strongly depend on the character of the twin boundaries in polycrystalline Si photovoltaic cells. However, the morphology of the twinned interface during growth has long been a mystery due to the lack of four-dimensional (i.e., space and time resolved) experiments. Many controversial mechanisms have been proposed for this process, most of which lack experimental verification. Here, we probe the real-time interfacial dynamics of polycrystalline Si particles growing from an Al-Si-Cu liquid via synchrotron-based X-ray tomography. Our novel analysis of the time evolution of the interfacial normals allows us to quantify unambiguously the habit plane and grain boundary orientations during growth. This, when combined with direct measurements of the interfacial morphology provide the first confirmation of twin-mediated growth, proposed over 50 years ago. Using the insights provided by these experiments, we have developed a unified picture of the phenomena responsible for the dynamics of faceted Si growth.

Couplings of watersheds and coastal waters: Sources and consequences of nutrient enrichment in Waquoit Bay, Massachusetts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valiela, I.; Foreman, K.; LaMontagne, M.

1992-12-01

Human activities on coastal watersheds provide the major sources of nutrients entering shallow coastal ecosystems. Nutrient loadings from watersheds alter structure and function of receiving aquatic ecosystems. To investigate this coupling of land to marine systems, a series of subwatersheds of Waquoit Bay differing in degree of urbanization and with widely different nutrient loading rates was studied. The subwatersheds differ in septic tanks numbers and forest acreage. Ground water is the major mechanism that transports nutrients to coastal waters. Some attenuation of nutrient concentrations within the aquifer or at the sediment-water interface, but significant increases in the nutrient content ofmore » groundwater arriving at the shore's edge are in urbanized areas. The groundwater flows through the sediment-water boundary, and sufficient groundwater-borne nutrients (nitrogen in particular) traverse the sediment-water boundary to cause significant changes in the aquatic ecosystem. These loading-dependent alterations include increased nutrients in water, greater primary production by phytoplankton, and increased macroalgal biomass and growth. The increased macroalgal biomass dominates the bay ecosystem through second- or third-order effects such as alterations of nutrient status of water columns and increasing frequency of anoxic events. The increases in seaweeds have decreased the areas covered by eelgrass habitats. The change in habitat type, plus the increased frequency of anoxic events, change the composition of the benthic fauna. The importance of bottom-up control in shallow coastal food webs is evident. The coupling of land to sea by groundwater-borne nutrient transport is mediated by a complex series of steps, making it unlikely to find a one-to-one relation between land use and conditions in the aquatic ecosystem. Appropriate models may provide a way to deal with the complexities of the coupling. 22 refs., 14 figs., 5 tabs.« less

Morphogenesis at the inflorescence shoot apex of Anagallis arvensis: surface geometry and growth in comparison with the vegetative shoot.

PubMed

Kwiatkowska, Dorota; Routier-Kierzkowska, Anne-Lise

2009-01-01

Quantitative analysis of geometry and surface growth based on the sequential replica method is used to compare morphogenesis at the shoot apex of Anagallis arvensis in the reproductive and vegetative phases of development. Formation of three types of lateral organs takes place at the Anagallis shoot apical meristem (SAM): vegetative leaf primordia are formed during the vegetative phase and leaf-like bracts and flower primordia during the reproductive phase. Although the shapes of all the three types of primordia are very similar during their early developmental stages, areal growth rates and anisotropy of apex surface growth accompanying formation of leaf or bract primordia are profoundly different from those during formation of flower primordia. This provides an example of different modes of de novo formation of a given shape. Moreover, growth accompanying the formation of the boundary between the SAM and flower primordium is entirely different from growth at the adaxial leaf or bract primordium boundary. In the latter, areal growth rates at the future boundary are the lowest of all the apex surface, while in the former they are relatively very high. The direction of maximal growth rate is latitudinal (along the future boundary) in the case of leaf or bract primordium but meridional (across the boundary) in the case of flower. The replica method does not enable direct analysis of growth in the direction perpendicular to the apex surface (anticlinal direction). Nevertheless, the reconstructed surfaces of consecutive replicas taken from an individual apex allow general directions of SAM surface bulging accompanying primordium formation to be recognized. Precise alignment of consecutive reconstructions shows that the direction of initial bulging during the leaf or bract formation is nearly parallel to the shoot axis (upward bulging), while in the case of flower it is perpendicular to the axis (lateral bulging). In future, such 3D reconstructions can be used to assess displacement velocity fields so that growth in the anticlinal direction can be assessed. In terms of self-perpetuation, the inflorescence SAM of Anagallis differs from the SAM in the vegetative phase in that the centrally located region of slow growth is less distinct in the inflorescence SAM. Moreover, the position of this slowly growing zone with respect to cells is not stable in the course of the meristem ontogeny.

Future Directions for Urban Forestry Research in the United States

Treesearch

John F. Dwyer; David J. Nowak; Gary W. Watson

2002-01-01

Urban forestry research promises to continue to be an integral part of the growth and development of forestry in urban and urbanizing areas of the United States. The future is expected to bring increased emphasis on research in support of the care of trees and other plants, ecological restoration, and comprehensive and adaptive management across the landscape....

Four decades urban growth and land use change in Samara Russia through remote sensing and GIS techniques

NASA Astrophysics Data System (ADS)

Boori, Mukesh Singh; Choudhary, Komal; Kupriyanov, Alexander; Kovelskiy, Viktor

2015-12-01

This study illustrates the spatio-temporal dynamics of urban growth and land use changes in Samara city, Russia from 1975 to 2015. Landsat satellite imageries of five different time periods from 1975 to 2015 were acquired and quantify the changes with the help of ArcGIS 10.1 Software. By applying classification methods to the satellite images four main types of land use were extracted: water, built-up, forest and grassland. Then, the area coverage for all the land use types at different points in time were measured and coupled with population data. The results demonstrate that, over the entire study period, population was increased from 1146 thousand people to 1244 thousand from 1975 to 1990 but later on first reduce and then increase again, now 1173 thousand population. Built-up area is also change according to population. The present study revealed an increase in built-up by 37.01% from 1975 to 1995, than reduce -88.83% till 2005 and an increase by 39.16% from 2005 to 2015, along with the increase in population, migration from rural areas owing to the economic growth and technological advantages associated with urbanization. Information on urban growth, land use and land cover change study is very useful to local government and urban planners for the betterment of future plans to sustainable development of the city.

Rates of urbanisation and the resiliency of air and water quality.

PubMed

Duh, Jiunn-Der; Shandas, Vivek; Chang, Heejun; George, Linda A

2008-08-01

Global human population and urban development are increasing at unprecedented rates and creating tremendous stress on local, regional, and global air and water quality. However, little is known about how urban areas vary in their capacity to address effectively air and water quality impacts associated to urban development. There exists a need to better understanding the factors that mediate the interactions between urbanisation and variations of environmental quality. By synthesizing literatures on the relationship between urban development and air and water quality, we assess the amount of scholarship for each of these cities, characterize population growth rates in one hundred of the largest global cities, and link growth trends to changes in air and water quality. Our results suggest that, while there is a growing literature linking urbanisation and environmental quality, some regions of the globe are better represented than others, and that these trends are consistent with our characterization of population growth rates. In addition, the comparison between population growth rates and air and water quality suggest that multiple factors affect the environmental quality, and that approaching rates of urbanisation through the lens of 'resiliency' can be an effective integrative concept for studying the capacity of urban areas to respond to rapid rates of change. Based on these results we offer a framework for systematically assessing changes in air and water quality in megacities.

Projecting Future Urbanization with Prescott College's Spatial Growth Model to Promote Environmental Sustainability and Smart Growth, A Case Study in Atlanta, Georgia

NASA Technical Reports Server (NTRS)

Estes, Maurice G., Jr.; Crosson, William; Limaye, Ashutosh; Johnson, Hoyt; Quattrochi, Dale; Lapenta, William; Khan, Maudood

2006-01-01

Planning is an integral element of good management and necessary to anticipate events not merely respond to them. Projecting the quantity and spatial distribution of urban growth is essential to effectively plan for the delivery of city services and to evaluate potential environmental impacts. The major drivers of growth in large urban areas are increasing population, employment opportunities, and quality of life attractors such as a favorable climate and recreation opportunities. The spatial distribution of urban growth is dictated by the amount and location of developable land, topography, energy and water resources, transportation network, climate change, and the existing land use configuration. The Atlanta region is growing very rapidly both in population and the consumption of forestland or low-density residential development. Air pollution and water availability are significant ongoing environmental issues. The Prescott Spatial Growth Model (SGM) was used to make growth projections for the metropolitan Atlanta region to 2010,2020 and 2030 and results used for environmental assessment in both business as usual and smart growth scenarios. The Prescott SGM is a tool that uses an ESRI ArcView extension and can be applied at the parcel level or more coarse spatial scales and can accommodate a wide range of user inputs to develop any number of growth rules each of which can be weighted depending on growth assumptions. These projections were used in conjunction with meteorological and air quality models to evaluate future environmental impacts. This presentation will focus on the application of the SGM to the 13-County Atlanta Regional Commission planning jurisdiction as a case study. The SGM will be described, including how rule sets are developed and the decision process for allocation of future development to available land use categories. Data inputs required to effectively run the model will be discussed. Spatial growth projections for ten, twenty, and thirty year planning horizons will be presented and results discussed, including regional climate and air quality impacts.

Mental health and poverty in the inner city.

PubMed

Anakwenze, Ujunwa; Zuberi, Daniyal

2013-08-01

Rapid urbanization globally threatens to increase the risk to mental health and requires a rethinking of the relationship between urban poverty and mental health. The aim of this article is to reveal the cyclic nature of this relationship: Concentrated urban poverty cultivates mental illness, while the resulting mental illness reinforces poverty. The authors used theories about social disorganization and crime to explore the mechanisms through which the urban environment can contribute to mental health problems. They present some data on crime, substance abuse, and social control to support their claim that mental illness reinforces poverty. The authors argue that, to interrupt this cycle and improve outcomes, social workers and policymakers must work together to implement a comprehensive mental health care system that emphasizes prevention, reaches young people, crosses traditional health care provision boundaries, and involves the entire community to break this cycle and improve the outcomes of those living in urban poverty.