Newly Branded Energy Systems Integration Group Joins International

Science.gov Websites

research fellow at NREL. Likewise, UVIG sees opportunity in partnering with iiESI. The international Group Joins International Institute for Energy Systems Integration Newly Branded Energy Systems Integration Group Joins International Institute for Energy Systems Integration March 22, 2018 The world of

26 CFR 1.168(d)-1 - Applicable conventions-half-year and mid-quarter conventions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... return year (i.e., July 1). (iv) In the case of a corporation that joins or leaves a consolidated group... placed in service by the joining or leaving member in the taxable year before it joins or after it leaves... test for the consolidated return year. If a corporation leaves a consolidated group and joins another...

Molecular engineering of fracture energy dissipating sacrificial bonds into cellulose nanocrystal nanocomposites.

PubMed

McKee, Jason R; Huokuna, Johannes; Martikainen, Lahja; Karesoja, Mikko; Nykänen, Antti; Kontturi, Eero; Tenhu, Heikki; Ruokolainen, Janne; Ikkala, Olli

2014-05-12

Even though nanocomposites have provided a plethora of routes to increase stiffness and strength, achieving increased toughness with suppressed catastrophic crack growth has remained more challenging. Inspired by the concepts of mechanically excellent natural nanomaterials, one-component nanocomposites were fabricated involving reinforcing colloidal nanorod cores with polymeric grafts containing supramolecular binding units. The concept is based on mechanically strong native cellulose nanocrystals (CNC) grafted with glassy polymethacrylate polymers, with side chains that contain 2-ureido-4[1H]-pyrimidone (UPy) pendant groups. The interdigitation of the grafts and the ensuing UPy hydrogen bonds bind the nanocomposite network together. Under stress, UPy groups act as sacrificial bonds: simultaneously providing adhesion between the CNCs while allowing them to first orient and then gradually slide past each other, thus dissipating fracture energy. We propose that this architecture involving supramolecular binding units within side chains of polymer grafts attached to colloidal reinforcements opens generic approaches for tough nanocomposites. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Synthesis of nanobelt-like 1-dimensional silver/nanocarbon hybrid materials for flexible and wearable electroncs.

PubMed

Han, Joong Tark; Jang, Jeong In; Cho, Joon Young; Hwang, Jun Yeon; Woo, Jong Seok; Jeong, Hee Jin; Jeong, Seung Yol; Seo, Seon Hee; Lee, Geon-Woong

2017-07-10

Most synthetic processes of metallic nanostructures were assisted by organic/inorganic or polymeric materials to control their shapes to one-dimension or two-dimension. However, these additives have to be removed after synthesis of metal nanostructures for applications. Here we report a straightforward method for the low-temperature and additive-free synthesis of nanobelt-like silver nanostructures templated by nanocarbon (NC) materials via bio-inspired shape control by introducing supramolecular 2-ureido-4[1H]pyrimidinone (UPy) groups into the NC surface. The growth of the Ag nanobelt structure was found to be induced by these UPy groups through observation of the selective formation of Ag nanobelts on UPy-modified carbon nanotubes and graphene surfaces. The synthesized NC/Ag nanobelt hybrid materials were subsequently used to fabricate the highly conductive fibres (>1000S/cm) that can function as a conformable electrode and highly tolerant strain sensor, as well as a highly conductive and robust paper (>10000S/cm after thermal treatment).

Using Negotiated Joining to Construct and Fill Open-ended Roles in Elite Culinary Groups.

PubMed

Tan, Vaughn

2015-03-01

This qualitative study examines membership processes in groups operating in an uncertain environment that prevents them from fully predefining new members' roles. I describe how nine elite high-end, cutting-edge culinary groups in the U.S. and Europe, ranging from innovative restaurants to culinary R&D groups, use negotiated joining-a previously undocumented process-to systematically construct and fill these emergent, open-ended roles. I show that negotiated joining is a consistently patterned, iterative process that begins with a role that both aspirant and target group explicitly understand to be provisional. This provisional role is then jointly modified and constructed by the aspirant and target group through repeated iterations of proposition, validation through trial and evaluation, and selective integration of validated role components. The initially provisional role stabilizes and the aspirant achieves membership if enough role components are validated; otherwise the negotiated joining process is abandoned. Negotiated joining allows the aspirant and target group to learn if a mutually desirable role is likely and, if so, to construct such a role. In addition, the provisional roles in negotiated joining can support absorptive capacity by allowing novel role components to enter target groups through aspirants' efforts to construct stable roles for themselves, while the internal adjustment involved in integrating newly validated role components can have the unintended side effect of supporting adaptation by providing opportunities for the groups to use these novel role components to modify their role structure and goals to suit a changing and uncertain environment. Negotiated joining thus reveals role ambiguity's hitherto unexamined beneficial consequences and provides a foundation for a contingency theory of new-member acquisition.

Group-living herbivores weigh up food availability and dominance status when making patch-joining decisions.

PubMed

Stears, Keenan; Kerley, Graham I H; Shrader, Adrian M

2014-01-01

Two key factors that influence the foraging behaviour of group-living herbivores are food availability and individual dominance status. Yet, how the combination of these factors influences the patch-joining decisions of individuals foraging within groups has scarcely been explored. To address this, we focused on the patch-joining decisions of group-living domestic goats (Capra hircus). When individuals were tested against the top four ranked goats of the herd, we found that at patches with low food availability they avoided these dominant patch-holders and only joined subordinates (i.e. costs outweighed benefits). However, as the amount of food increased, the avoidance of the top ranked individuals declined. Specifically, goats shifted and joined the patch of an individual one dominance rank higher than the previous dominant patch holder when the initial quantity of food in the new patch was twice that of the lower ranking individual's patch (i.e. benefits outweighed costs). In contrast, when individuals chose between patches held by dominant goats, other than the top four ranked goats, and subordinate individuals, we found that they equally joined the dominant and subordinate patch-holders. This joining was irrespective of the dominance gap, absolute rank of the dominant patch-holder, sex or food availability (i.e. benefits outweighed costs). Ultimately, our results highlight that herbivores weigh up the costs and benefits of both food availability and patch-holder dominance status when making patch-joining decisions. Furthermore, as the initial quantity of food increases, food availability becomes more important than dominance with regard to influencing patch-joining decisions.

Comparative analysis of different joining techniques to improve the passive fit of cobalt-chromium superstructures.

PubMed

Barbi, Francisco C L; Camarini, Edevaldo T; Silva, Rafael S; Endo, Eliana H; Pereira, Jefferson R

2012-12-01

The influence of different joining techniques on passive fit at the interface structure/abutment of cobalt-chromium (Co-Cr) superstructures has not yet been clearly established. The purpose of this study was to compare 3 different techniques of joining Co-Cr superstructures by measuring the resulting marginal misfit in a simulated prosthetic assembly. A specially designed metal model was used for casting, sectioning, joining, and measuring marginal misfit. Forty-five cast bar-type superstructures were fabricated in a Co-Cr alloy and randomly assigned by drawing lots to 3 groups (n=15) according to the joining method used: conventional gas-torch brazing (G-TB), laser welding (LW), and tungsten inert gas welding (TIG). Joined specimens were assembled onto abutment analogs in the metal model with the 1-screw method. The resulting marginal misfit was measured with scanning electron microscopy (SEM) at 3 different points: distal (D), central (C), and mesial (M) along the buccal aspect of both abutments: A (tightened) and B (without screw). The Levene test was used to evaluate variance homogeneity and then the Welsch ANOVA for heteroscedastic data (α=.05). Significant differences were found on abutment A between groups G-TB and LW (P=.013) measured mesially and between groups G-TB and TIG (P=.037) measured centrally. On abutment B, significant differences were found between groups G-TB and LW (P<.001) and groups LW and TIG (P<.001) measured mesially; groups G-TB and TIG (P=.007) measured distally; and groups G-TB and TIG (P=.001) and LW and TIG (P=.007) measured centrally. The method used for joining Co-Cr prosthetic structures had an influence on the level of resulting passive fit. Structures joined by the tungsten inert gas method produced better mean results than did the brazing or laser method. Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

A continuous spectrophotometric assay method for peptidylarginine deiminase type 4 activity.

PubMed

Liao, Ya-Fan; Hsieh, Hui-Chieh; Liu, Guang-Yaw; Hung, Hui-Chih

2005-12-15

A simple, continuous spectrophotometric assay for peptidylarginine deiminase (PAD) is described. Deimination of peptidylarginine results in the formation of peptidylcitrulline and ammonia. The ammonia released during peptidylarginine hydrolysis is coupled to the glutamate-dehydrogenase-catalyzed reductive amination of alpha-ketoglutarate to glutamate and reduced nicotinamide adenine dinucleotide (NADH) oxidation. The disappearance of absorbance at 340nm due to NADH oxidation is continuously measured. The specific activity obtained by this new protocol for highly purified human PAD is comparable to that obtained by a commonly used colorimetric procedure, which measures the ureido group of peptidylcitrulline by coupling with diacetyl monoxime. The present continuous spectrophotometric method is highly sensitive and accurate and is thus suitable for enzyme kinetic analysis of PAD. The Ca(2+) concentration for half-maximal activity of PAD obtained by this method is comparable to that previously obtained by the colorimetric procedure.

Fluoride anion sensing mechanism of 2-ureido-4[1H]-pyrimidinone quadruple hydrogen-bonded supramolecular assembly: photoinduced electron transfer and partial configuration change.

PubMed

Chen, Jun-Sheng; Zhou, Pan-Wang; Li, Guang-Yue; Chu, Tian-Shu; He, Guo-Zhong

2013-05-02

The fluoride anion sensing mechanism of 6-methyl-5-(9-methylene-anthracene)-(2-butylureido-4[1H]-pyrimidinone) (AnUP) has been investigated using the DFT/TDDFT method. The theoretical results indicate that the proton of the N3-H3 group in pyrimidine moiety is captured by the added fluoride anion and then deprotonated. The calculated vertical excitation energies of AnUP-dimer and its deprotonated form agree well with the experimental results. The molecular orbital analysis demonstrates that the first excited state (S1) of AnUP-dimer is a local excited state with a π-π* transition, whereas for the deprotonated form, S1 is a completely charge-separation state and is responsible for the photoinduced electron transfer (PET) process. The PET process from anthracene to the pyrimidine moiety leads to the fluorescence quenching.

Isolation, synthesis, and pharmacology of metabolites of 1-(3,4-dichlorobenzyl)-3,4,5,6-tetrahydro-2(1H)-pyrimidone.

PubMed

Schwan, T J; Ellis, K O; Wessels, F L; Pugh, D; Bell, R

1980-10-01

The metabolism of 1-(3,4-dichlorobenzyl)-3,4,5,6-tetrahydro-2(1H)-pyrimidone, an antianxiety/antidepressant agent, in dogs is reported. Two metabolites, 3-[1-(3,4-dichlorobenzyl)-1-ureido]propanoic acid and 1-(3,4-dichlorobenzyl)uracil, were isolated, characterized, and synthesized. Neither metabolite was acutely toxic, and they did not exhibit antidepressant or antianxiety/anticonvulsant activity.

Using Negotiated Joining to Construct and Fill Open-ended Roles in Elite Culinary Groups

PubMed Central

Tan, Vaughn

2015-01-01

This qualitative study examines membership processes in groups operating in an uncertain environment that prevents them from fully predefining new members’ roles. I describe how nine elite high-end, cutting-edge culinary groups in the U.S. and Europe, ranging from innovative restaurants to culinary R&D groups, use negotiated joining—a previously undocumented process—to systematically construct and fill these emergent, open-ended roles. I show that negotiated joining is a consistently patterned, iterative process that begins with a role that both aspirant and target group explicitly understand to be provisional. This provisional role is then jointly modified and constructed by the aspirant and target group through repeated iterations of proposition, validation through trial and evaluation, and selective integration of validated role components. The initially provisional role stabilizes and the aspirant achieves membership if enough role components are validated; otherwise the negotiated joining process is abandoned. Negotiated joining allows the aspirant and target group to learn if a mutually desirable role is likely and, if so, to construct such a role. In addition, the provisional roles in negotiated joining can support absorptive capacity by allowing novel role components to enter target groups through aspirants’ efforts to construct stable roles for themselves, while the internal adjustment involved in integrating newly validated role components can have the unintended side effect of supporting adaptation by providing opportunities for the groups to use these novel role components to modify their role structure and goals to suit a changing and uncertain environment. Negotiated joining thus reveals role ambiguity’s hitherto unexamined beneficial consequences and provides a foundation for a contingency theory of new-member acquisition. PMID:26273105

Enantioselective cyclization of racemic supramolecular polymers.

PubMed

ten Cate, A Tessa; Dankers, Patricia Y W; Kooijman, Huub; Spek, Anthony L; Sijbesma, Rint P; Meijer, E W

2003-06-11

Homochiral hydrogen-bonded cyclic assemblies are formed in dilute solutions of racemic supramolecular polymers based on the quadruple hydrogen bonding 2-ureido-4[1H]-pyrimidinone unit, as observed by 1H NMR and SEC experiments. Preorganization of the monomers and the combined binding strength of the eight hydrogen bonds result in a very high stability of the cyclic aggregates with pronounced selectivity between homochiral and heterochiral cyclic species, usually only observed in crystalline or liquid crystalline phases.

The influence of performance-based payment on childhood immunisation coverage.

PubMed

Merilind, Eero; Salupere, Rauno; Västra, Katrin; Kalda, Ruth

2015-06-01

Pay-for-performance, also called the quality system (QS) in Estonia, was implemented in 2006 and one indicator for achievement is the childhood immunisation coverage rate. The WHO vaccination coverage in Europe for diphtheria, tetanus and pertussis, and measles in children aged around one year old should meet or exceed 90 per cent. The study was conducted using a database from the Estonian Health Insurance Fund. The study compared childhood immunisation coverage rates of all Estonian family physicians in two groups, joined and not joined to the quality system during the observation period 2006-2012. Immunisation coverage was calculated as the percentage of persons in the target age group who received a vaccine dose by a given age. The target level of immunisations in Estonia is set at 90 per cent and higher. Immunisation coverage rates of family doctors (FD) in Estonia showed significant differences between two groups of doctors: joined to the quality system and not joined. Doctors joined to the quality system met the 90 per cent vaccination criterion more frequently compared to doctors not joined to the quality system. Doctors not joined to the quality system were below the 90 per cent vaccination criterion in all vaccinations listed in the Estonian State Immunisation Schedule. Pay-for-performance as a financial incentive encourages higher levels of childhood immunisations. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Self-assembled squares and triangles by simultaneous hydrogen bonding and metal coordination.

PubMed

Marshall, Laura J; de Mendoza, Javier

2013-04-05

Through the combination of hydrogen bonding and metal-templated self-assembly, molecular squares and molecular triangles are observed in chloroform solution upon the complexation of hydrogen-bonded dimers of para-pyridyl-substituted 2-ureido-4-[1H]-pyrimidinone (UPy) and an appropriate cis-substituted palladium complex. Molecular modeling studies and NMR analysis confirmed the presence of two distinct structures in solution: the tubular structure of the molecular square and propeller-bowl structure of the molecular triangle.

Cesium cation templated selective synthesis of a "cone-shaped" sugar macrotricyclic cryptand: A dual anion-cation molecular recognition of potassium tartrate.

PubMed

Porwanski, S; Moretti, F; Dumarcay-Charbonnier, F; Marsura, A

2016-05-01

Cesium templated Staudinger-aza-Wittig tandem reaction (S.A.W.) has been used in the synthesis of a bis-diazacrown-bis-cellobiosyl-tetra-ureido cryptand. A novel macrotricyclic compound having a "cone-shaped" configuration was selectively obtained. Additionally, first results on potential recognition properties of the cryptand are also given. Copyright © 2015 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

Experimental Analysis of Small-Group Performance Effectiveness: Behavioral and Biological Interactions.

DTIC Science & Technology

1982-04-01

processes requiring systematic experimental analysis. Accordingly, group performance effectiveness studies were initiated to 61 assess the effects on...the experiment. 67 active processes associated with Joining the respective established groups, but the absence of baseline levels precludes such an...novitiate in comparison to such values observed during baseline days suggested an active process associated with the joining of the group and emphasized the

Differentials in Characteristics between Parent Group Members and Non-Members.

ERIC Educational Resources Information Center

Keenan, Vincent; Suelzle, Marijean

Three hundred twenty-nine parents of developmentally disabled children (0 to 21 years old) were surveyed to test the hypothesis that parents who join parent groups are more likely to be white, highly educated, currently married, Republican, and to have higher family incomes than those who do not join parent groups. The survey questionnaire was…

N,N,N′,N′,N′′-Penta­methyl-N′′-[3-(1,3,3-trimethyl­ureido)prop­yl]guanidinium tetra­phenyl­borate

PubMed Central

Tiritiris, Ioannis; Kantlehner, Willi

2012-01-01

In the crystal structure of the title molecular salt, C13H30N5O+·C24H20B−, discrete guanidinium cations and tetra­phenyl­borate anions are present. The C—N bond lengths in the CN3 unit are 1.3427 (12), 1.3445 (12) and 1.3453 (13) Å, indicating double-bond character. The central C atom is surrounded in a nearly ideal trigonal-planar geometry by three N atoms and the positive charge is delocalized on the CN3 plane. The bonds between the N atoms and the terminal C-methyl groups all have values close to a typical single bond [1.4595 (15)–1.4688 (12) Å]. In the crystal, cations are connected by C—H⋯O contacts generating a chain along the c axis. PMID:22798881

Optically responsive supramolecular polymer glasses

NASA Astrophysics Data System (ADS)

Balkenende, Diederik W. R.; Monnier, Christophe A.; Fiore, Gina L.; Weder, Christoph

2016-03-01

The reversible and dynamic nature of non-covalent interactions between the constituting building blocks renders many supramolecular polymers stimuli-responsive. This was previously exploited to create thermally and optically healable polymers, but it proved challenging to achieve high stiffness and good healability. Here we present a glass-forming supramolecular material that is based on a trifunctional low-molecular-weight monomer ((UPyU)3TMP). Carrying three ureido-4-pyrimidinone (UPy) groups, (UPyU)3TMP forms a dynamic supramolecular polymer network, whose properties are governed by its cross-linked architecture and the large content of the binding motif. This design promotes the formation of a disordered glass, which, in spite of the low molecular weight of the building block, displays typical polymeric behaviour. The material exhibits a high stiffness and offers excellent coating and adhesive properties. On account of reversible dissociation and the formation of a low-viscosity liquid upon irradiation with ultraviolet light, rapid optical healing as well as (de)bonding on demand is possible.

Self-Healing Gelatin Hydrogels Cross-Linked by Combining Multiple Hydrogen Bonding and Ionic Coordination.

PubMed

Zhang, Guangzhao; Lv, Lei; Deng, Yonghong; Wang, Chaoyang

2017-06-01

Self-healing hydrogels have been studied by many researchers via multiple cross-linking approaches including physical and chemical interactions. It is an interesting project in multifunctional hydrogel exploration that a water soluble polymer matrix is cross-linked by combining the ionic coordination and the multiple hydrogen bonds to fabricate self-healing hydrogels with injectable property. This study introduces a general procedure of preparing the hydrogels (termed gelatin-UPy-Fe) cross-linked by both ionic coordination of Fe 3+ and carboxyl group from the gelatin and the quadruple hydrogen bonding interaction from the ureido-pyrimidinone (UPy) dimers. The gelatin-UPy-Fe hydrogels possess an excellent self-healing property. The effects of the ionic coordination of Fe 3+ and quadruple hydrogen bonding of UPy on the formation and mechanical behavior of the prepared hydrogels are investigated. In vitro drug release of the gelatin-UPy-Fe hydrogels is also observed, giving an intriguing glimpse into possible biological applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Synthesis and characterization of chitosan alkyl urea.

PubMed

Wang, Jing; Jiang, Ji-Zhou; Chen, Wei; Bai, Zheng-Wu

2016-07-10

Chitosan is a versatile material employed for various purposes in many fields including the development of chiral stationary phases for enantioseparation. Chitosan alkyl urea is a kind of intermediate used to prepare enantioseparation materials. In order to synthesize the intermediates, in the present work, a new way to prepare chitosan alkyl urea has been established: chitosan was first reacted with methyl chloroformate yielding N-methoxyformylated chitosan, which was then converted to chitosan alkyl urea through amine-ester exchange reaction. With a large excess of methyl chloroformate and primary amine of low stereohindrance, the amino group in chitosan could be almost completely converted to ureido group. The as-prepared chitosan alkyl urea derivatives were characterized by IR, (1)H NMR, (13)C NMR,(1)H-(1)H COSY and (1)H-(13)C HSQC NMR spectra. The chemical shifts of hydrogen and carbon atoms of glucose unit were assigned. It was found that the degree of substitution was obviously lower if cyclopropyl amine, aniline, tert-butyl amine and diethyl amine were used as reactants for the amine-ester exchange reaction. The reason was explained with the aid of theoretical calculations. Copyright © 2016 Elsevier Ltd. All rights reserved.

Synthesis, antimalarial properties, and SAR studies of alkoxyurea-based HDAC inhibitors.

PubMed

Hansen, Finn K; Skinner-Adams, Tina S; Duffy, Sandra; Marek, Linda; Sumanadasa, Subathdrage D M; Kuna, Krystina; Held, Jana; Avery, Vicky M; Andrews, Katherine T; Kurz, Thomas

2014-03-01

Histone deacetylase (HDAC) inhibitors are an emerging class of potential antimalarial drugs. We investigated the antiplasmodial properties of 16 alkoxyurea-based HDAC inhibitors containing various cap and zinc binding groups (ZBGs). Ten compounds displayed sub-micromolar activity against the 3D7 line of Plasmodium falciparum. Structure-activity relationship studies revealed that a hydroxamic acid ZBG is crucial for antiplasmodial activity, and that the introduction of bulky alkyl substituents to cap groups increases potency against asexual blood-stage parasites. We also demonstrate that selected compounds cause hyperacetylation of P. falciparum histone H4, indicating inhibition of one or more PfHDACs. To assess the selectivity of alkoxyurea-based HDAC inhibitors for parasite over normal mammalian cells, the cytotoxicity of representative compounds was evaluated against neonatal foreskin fibroblast (NFF) cells. The most active compound, 6-((3-(4-(tert-butyl)phenyl)ureido)oxy)-N-hydroxyhexanamide (1 e, Pf3D7 IC50 : 0.16 μM) was 31-fold more toxic against the asexual blood stages than towards normal mammalian cells. Moreover, a subset of four structurally diverse HDAC inhibitors revealed moderate activity against late-stage (IV-V) gametocytes. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

[The effects of electro-acupuncture on the signaling pathway of TLR/MYD88 in ankle joint synovial tissue of acute gouty arthritis rats].

PubMed

Zhang, Chao-nan; Huang, Xue-kuan; Luo, Yan; Jiang, Juan; Wan, Lei; Wang, Ling

2014-11-01

To investigate the effects of electro-acupuncture ( EA) on the related protein expression of the signaling pathway of the toll-like receptor2 (TLR2)/myeloid differentiation factor (MYD) 88 in ankle joint synovial tissue of acute gouty arthritis (AGA) rats. Fifty male SD rats were randomly divided into 5 groups: normal group, SMD group, AGA model group, medication group and EA group, 10 rats in each group. SMD group established model by inducing SMD, other groups established AGA model by inducing monosodium urate, except the normal group. Two days before model was established, normal and SMD and AGA model groups were lavaged with normal saline (20 mL/kg), medication group was lavaged with colchicine solution (1 mg/kg), EA (1. 5-2 Hz, D.-D. wave, 9 V, 1-3 mA) was applied to"Sanyinjiao" (SP6),"Jiexi"(ST41) and "kunlun" (BL60) for 20 min, once daily, continuously for 9 days. Then the join sewlling index was observed periodically, the protein expression of TLR2 and MYD88 was determined by immunohistochemistry. Compared to the normal group, the join sewlling of the SMD group in test join increased significantly (P<0. 05) and the protein expression of TLR2 and MYD88 in synovial tissue has not statistically significant (P>0.05), the oin sewlling and protein expression of TLR2 and MYD88 in synovial tissue of model group increased significantly P<0. 05); The medication and EA group compared to the model group, the protein expression of TLR2 and MYD88 in synovial tissue decreased significantly (P <0. 05), the join sewlling in test join decreased significantly P<1. 05); There were not statistically significant between the EA group and the medication group (P>0.05). EA can alleviate the symptoms of AGA, which may be related to regulation of the protein expression Y TRI and MYD88 in the TLR/MYD88 signaling pathway.

Oligonucleotides as probes for studying polymerization reactions in dilute aqueous solution: II. Polycondensations

NASA Technical Reports Server (NTRS)

Kolb, V.; Orgel, L. E.

1995-01-01

We have prepared a [32P]-labeled oligonucleotide probe carrying a ureido (-NH-CO-NH2) function at its 3'-terminus. This labeled oligomer was used to study polycondensations of urea and formaldehyde and of various phenols and formaldehyde in aqueous solution. The formation of formaldehyde copolymers attached to the amido-function of the probe was monitored by gel electrophoresis. Our results are generally in agreement with those obtained using conventional techniques. Our method is suitable for monitoring potentially prebiotic polycondensation reactions involving formaldehyde.

Oligonucleotides as probes for studying polymerization reactions in dilute aqueous solution. 2: Polycondensations

NASA Technical Reports Server (NTRS)

Kolb, Vera; Orgel, Leslie E.

1995-01-01

We have prepared a (P-32)-labeled oligonucleotide probe carrying a ureido (-NH-CO-NH2) function at its 3'-terminus. This labeled oligomer was used to study polycondensations of urea and formaldehyde and of various phenols and formaldehyde in aqueous solution. The formation of formaldehyde copolymers attached to the amido-function of the probe was monitored by gel electrophoresis. Our results are generally in agreement with those obtained using conventional techniques. Our method is suitable for monitoring potentially prebiotic polycondensation reactions involving formaldehyde.

Hydrogen bonding directed self-assembly of small-molecule amphiphiles in water.

PubMed

Xu, Jiang-Fei; Niu, Li-Ya; Chen, Yu-Zhe; Wu, Li-Zhu; Tung, Chen-Ho; Yang, Qing-Zheng

2014-08-01

Compounds comprising one or two quadruply hydrogen bonding units, 2-ureido-4[1H]-pyrimidinone (UPy) and tris(tetraethylene glycol monomethyl ether) moieties, were reported to form highly stable hydrogen-bonded assemblies in water. Compound 1, containing one UPy, assembles into vesicles, and compound 2, containing two UPy units, forms micelles. The aggregates disassemble reversibly when the solution pH is raised to 9.0 or above. The results demonstrate the utility of hydrogen bonding to direct the self-assembly of small-molecule building blocks in aqueous media.

Disulfide exchange in hydrogen-bonded cyclic assemblies: stereochemical self-selection by double dynamic chemistry.

PubMed

ten Cate, A Tessa; Dankers, Patricia Y W; Sijbesma, Rint P; Meijer, E W

2005-07-22

Stereoselective cyclization of cystine-based bifunctional 2-ureido-4[1H]-pyrimidinone derivatives in CDCl(3) solutions was demonstrated by (1)H NMR spectroscopy. Thiolate-catalyzed disulfide exchange in solution led to the equilibration of different diastereomers of 1. At low concentrations, where formation of cyclic assemblies is the dominant mode of association, the molecules act as their own template. At these concentrations the meso diastereomer is formed preferentially, indicating a higher stability of its cyclic assemblies under the applied conditions, in comparison to the other diastereomers.

Dual Roles for DNA Polymerase Theta in Alternative End-Joining Repair of Double-Strand Breaks in Drosophila

PubMed Central

McVey, Mitch

2010-01-01

DNA double-strand breaks are repaired by multiple mechanisms that are roughly grouped into the categories of homology-directed repair and non-homologous end joining. End-joining repair can be further classified as either classical non-homologous end joining, which requires DNA ligase 4, or “alternative” end joining, which does not. Alternative end joining has been associated with genomic deletions and translocations, but its molecular mechanism(s) are largely uncharacterized. Here, we report that Drosophila melanogaster DNA polymerase theta (pol theta), encoded by the mus308 gene and previously implicated in DNA interstrand crosslink repair, plays a crucial role in DNA ligase 4-independent alternative end joining. In the absence of pol theta, end joining is impaired and residual repair often creates large deletions flanking the break site. Analysis of break repair junctions from flies with mus308 separation-of-function alleles suggests that pol theta promotes the use of long microhomologies during alternative end joining and increases the likelihood of complex insertion events. Our results establish pol theta as a key protein in alternative end joining in Drosophila and suggest a potential mechanistic link between alternative end joining and interstrand crosslink repair. PMID:20617203

Fracture resistance of inter-joined zirconia abutment of dental implant system with injection molding technique.

PubMed

Yang, Jianjun; Wang, Ke; Liu, Guangyuan; Wang, Dashan

2013-11-01

Zirconia powder in nanometers can be fabricated into inter-joined abutment of dental implant system with the injection shaping technique. This study was to detect the resistance of inter-joined zirconia abutment with different angle loading for clinical applications. The inter-joined abutments were shaped with the technique of injection of zirconia powder in nanometers. Sixty Osstem GSII 5 × 10 mm implants were used with 30 zirconia abutments and 30 Osstem GSII titanium abutments for fixation using 40 N torque force. The loading applications included 90°, 30°, and 0° formed by the long axis of abutments and pressure head of universal test machine. The fracture resistances of zirconia and titanium abutments were documented and analyzed. The inter-joined zirconia abutments were assembled to the Osstem GSII implants successfully. In the 90° loading mode, the fracture resistance of zirconia abutment group and titanium abutment group were 301.5 ± 15.4 N and 736.4 ± 120.1 N, respectively. And those in the 30° groups were 434.7 ± 36.1 N and 1073.1 ± 74 N, correspondingly. Significant difference in the two groups was found using t-test and Wilcoxon test. No damage on the abutments of the two groups but S-shaped bending on the implants was found when the 0° loading was 1300-2000 N. Through the assembly of Zirconia abutments and implants, all the components presented sufficient resistance acquired for the clinical application under loadings with different angle. © 2012 John Wiley & Sons A/S.

A Block Randomized Controlled Trial of a Brief Smoking Cessation Counselling and Advice through Short Message Service on Participants Who Joined the Quit to Win Contest in Hong Kong

ERIC Educational Resources Information Center

Chan, Sophia S. C.; Wong, David C. N.; Cheung, Yee Tak Derek; Leung, Doris Y. P.; Lau, Lisa; Lai, Vienna; Lam, Tai-Hing

2015-01-01

The present trial examined the effectiveness of brief interventions for smokers who joined the Hong Kong Quit to Win Contest to quit smoking. A block randomized controlled trial allocated 1003 adult daily smokers to three groups: (i) The TEL group (n = 338) received a 5-min nurse-led telephone counselling; (ii) The SMS group (n = 335) received…

Collective Movement in the Tibetan Macaques (Macaca thibetana): Early Joiners Write the Rule of the Game.

PubMed

Wang, Xi; Sun, Lixing; Li, Jinhua; Xia, Dongpo; Sun, Binghua; Zhang, Dao

2015-01-01

Collective behavior has recently attracted a great deal of interest in both natural and social sciences. While the role of leadership has been closely scrutinized, the rules used by joiners in collective decision making have received far less attention. Two main hypotheses have been proposed concerning these rules: mimetism and quorum. Mimetism predicts that individuals are increasingly likely to join collective behavior as the number of participants increases. It can be further divided into selective mimetism, where relationships among the participants affect the process, and anonymous mimetism, where no such effect exists. Quorum predicts that a collective behavior occurs when the number of participants reaches a threshold. To probe into which rule is used in collective decision making, we conducted a study on the joining process in a group of free-ranging Tibetan macaques (Macaca thibetana) in Huangshan, China using a combination of all-occurrence and focal animal sampling methods. Our results show that the earlier individuals joined movements, the more central a role they occupied among the joining network. We also found that when less than three adults participated in the first five minutes of the joining process, no entire group movement occurred subsequently. When the number of these early joiners ranged from three to six, selective mimetism was used. This means higher rank or closer social affiliation of early joiners could be among the factors of deciding whether to participate in movements by group members. When the number of early joiners reached or exceeded seven, which was the simple majority of the group studied, entire group movement always occurred, meaning that the quorum rule was used. Putting together, Macaca thibetana used a combination of selective mimetism and quorum, and early joiners played a key role in deciding which rule should be used.

Recruitment of child soldiers in Nepal: Mental health status and risk factors for voluntary participation of youth in armed groups.

PubMed

Kohrt, Brandon A; Yang, Minyoung; Rai, Sauharda; Bhardwaj, Anvita; Tol, Wietse A; Jordans, Mark J D

2016-08-01

Preventing involuntary conscription and voluntary recruitment of youth into armed groups are global human rights priorities. Pathways for self-reported voluntary recruitment and the impact of voluntary recruitment on mental health have received limited attention. The objective of this study was to identify risk factors for voluntarily joining armed groups, as well as the association of conscription status and mental health. In Nepal, interviews were conducted with 258 former child soldiers who participated in a communist (Maoist) revolution. Eighty percent of child soldiers joined 'voluntarily'. Girls were 2.07 times as likely to join voluntarily (95% CI, 1.03-4.16, p =0.04). Among girls, 51% reported joining voluntarily because of personal connections to people who were members of the armed group, compared to 22% of boys. Other reasons included escaping difficult life situations (36%), inability to achieve other goals in life (28%), and an appealing philosophy of the armed group (32%). Poor economic conditions were more frequently endorsed among boys (22%) than girls (10%). Voluntary conscription was associated with decreased risk for PTSD among boys but not for girls. Interventions to prevent voluntary association with armed groups could benefit from attending to difficulties in daily life, identifying non-violent paths to achieve life goals, and challenging the political philosophy of armed groups. Among boys, addressing economic risk factors may prevent recruitment, and prevention efforts for girls will need to address personal connections to armed groups, as it has important implications for preventing recruitment through new methods, such as social media.

Recruitment of child soldiers in Nepal: Mental health status and risk factors for voluntary participation of youth in armed groups

PubMed Central

Kohrt, Brandon A.; Yang, Minyoung; Rai, Sauharda; Bhardwaj, Anvita; Tol, Wietse A.; Jordans, Mark J. D.

2016-01-01

Preventing involuntary conscription and voluntary recruitment of youth into armed groups are global human rights priorities. Pathways for self-reported voluntary recruitment and the impact of voluntary recruitment on mental health have received limited attention. The objective of this study was to identify risk factors for voluntarily joining armed groups, as well as the association of conscription status and mental health. In Nepal, interviews were conducted with 258 former child soldiers who participated in a communist (Maoist) revolution. Eighty percent of child soldiers joined ‘voluntarily’. Girls were 2.07 times as likely to join voluntarily (95% CI, 1.03–4.16, p=0.04). Among girls, 51% reported joining voluntarily because of personal connections to people who were members of the armed group, compared to 22% of boys. Other reasons included escaping difficult life situations (36%), inability to achieve other goals in life (28%), and an appealing philosophy of the armed group (32%). Poor economic conditions were more frequently endorsed among boys (22%) than girls (10%). Voluntary conscription was associated with decreased risk for PTSD among boys but not for girls. Interventions to prevent voluntary association with armed groups could benefit from attending to difficulties in daily life, identifying non-violent paths to achieve life goals, and challenging the political philosophy of armed groups. Among boys, addressing economic risk factors may prevent recruitment, and prevention efforts for girls will need to address personal connections to armed groups, as it has important implications for preventing recruitment through new methods, such as social media. PMID:27524877

Apache Wars: A Constabulary Perspective

DTIC Science & Technology

2005-05-26

matriarchal ; young men would join their wife’s family upon marriage. Multiple families joined into local groups, which organized primarily for common interests...designated organization to free and protect its society from subversion, lawlessness, and insurgency. Also called FID. (JP 1-02) Information

Molecular Basis for the Recognition of Higher Fullerenes into Ureidopyrimidinone-Cyclotriveratrylene Self-Assembled Capsules.

PubMed

Huerta, Elisa; Serapian, Stefano Artin; Santos, Eva; Cequier, Enrique; Bo, Carles; de Mendoza, Javier

2016-09-12

Fullerenes C60 , C70 , and C84 may be readily encaged within a hydrogen-bonded dimeric capsule, based on two concave cyclotriveratrylene (CTV) scaffolds, each containing three self-complementary 2-ureido-4-[1H]-pyrimidinone (UPy) subunits. NMR spectroscopy and circular dichroism studies, complemented by dispersion-corrected DFT calculations, are reported with the aim of characterizing such capsule-fullerene complexes both structurally and energetically. Six fullerenes are considered: in agreement with experiments, calculations find that encapsulation is most favorable for C84 (on a par with C90 ), and follows the trend C60

The Organization of Collective Group Movements in Wild Barbary Macaques (Macaca sylvanus): Social Structure Drives Processes of Group Coordination in Macaques

PubMed Central

Seltmann, Anne; Majolo, Bonaventura

2013-01-01

Social animals have to coordinate activities and collective movements to benefit from the advantages of group living. Animals in large groups maintain cohesion by self-organization processes whereas in smaller groups consensus decisions can be reached. Where consensus decisions are relevant leadership may emerge. Variation in the organization of collective movements has been linked to variation in female social tolerance among macaque species ranging from despotic to egalitarian. Here we investigated the processes underlying group movements in a wild macaque species characterized by a degree of social tolerance intermediate to previously studied congeneric species. We focused on processes before, during and after the departure of the first individual. To this end, we observed one group of wild Barbary macaques (Macaca sylvanus) in the Middle Atlas, Morocco using all-occurrence behaviour sampling of 199 collective movements. We found that initiators of a collective movement usually chose the direction in which more individuals displayed pre-departure behavior. Dominant individuals contributed to group movements more than subordinates, especially juveniles, measured as frequencies of successful initiations and pre-departure behaviour. Joining was determined by affiliative relationships and the number of individuals that already joined the movement (mimetism). Thus, in our study group partially shared consensus decisions mediated by selective mimetism seemed to be prevalent, overall supporting the suggestion that a species’ social style affects the organization of group movements. As only the most tolerant species show equally shared consensus decisions whereas in others the decision is partially shared with a bias to dominant individuals the type of consensus decisions seems to follow a stepwise relation. Joining order may also follow a stepwise, however opposite, relationship, because dominance only determined joining in highly despotic, but not in intermediate and tolerant species. PMID:23805305

A test of theory of planned behavior in Korea: participation in alcohol-related social gatherings.

PubMed

Park, Hee Sun; Lee, Dong Wook

2009-12-01

Two studies are reported using the theory of planned behavior (TPB) to predict and explain joining and not joining alcohol-related social gatherings among Korean undergraduates in various engineering majors. Specifically, considering that the attitudinal component of TPB is behavioral-outcome-based, the current study investigated whether the outcomes of engaging in a behavior and of not engaging in a behavior would similarly predict intentions to engage in a behavior and intentions to not engage in a behavior. The current study also examined whether intentions to engage and intentions to not engage would be significantly related to self-reported behavior a week later. Participants in Study 1 reported TPB components (attitudes toward behavior, subjective norms, perceived behavioral control, and behavioral intentions) concerning joining alcohol-related social gatherings. Participants in Study 2 reported TPB components concerning not joining alcohol-related social gatherings. Additionally, a week later, the participants in both studies reported their participation in alcohol-related social gatherings from the past week. Generally, the results showed that the TPB components were significantly associated with undergraduates' intentions to join and intentions to not join. Specifically, conversation-related attitudes and senior-junior relationship-related attitudes were significantly related to intentions to join, and only group-related attitudes were significantly related to intentions to not join. Intentions to join and intentions to not join were not significantly related to self-reported behavior of joining alcohol-related social gatherings a week later. The findings from the current research provide some evidence that joining or not joining alcohol-related social gatherings may not be mere behavioral opposites, predictable by the presence or absence of the same behavioral outcomes. These two aspects of the behavior may require assessment of different behavioral outcomes or different assessments of the same behavioral outcomes.

Collective Movement in the Tibetan Macaques (Macaca thibetana): Early Joiners Write the Rule of the Game

PubMed Central

Li, Jinhua; Xia, Dongpo; Sun, Binghua; Zhang, Dao

2015-01-01

Collective behavior has recently attracted a great deal of interest in both natural and social sciences. While the role of leadership has been closely scrutinized, the rules used by joiners in collective decision making have received far less attention. Two main hypotheses have been proposed concerning these rules: mimetism and quorum. Mimetism predicts that individuals are increasingly likely to join collective behavior as the number of participants increases. It can be further divided into selective mimetism, where relationships among the participants affect the process, and anonymous mimetism, where no such effect exists. Quorum predicts that a collective behavior occurs when the number of participants reaches a threshold. To probe into which rule is used in collective decision making, we conducted a study on the joining process in a group of free-ranging Tibetan macaques (Macaca thibetana) in Huangshan, China using a combination of all-occurrence and focal animal sampling methods. Our results show that the earlier individuals joined movements, the more central a role they occupied among the joining network. We also found that when less than three adults participated in the first five minutes of the joining process, no entire group movement occurred subsequently. When the number of these early joiners ranged from three to six, selective mimetism was used. This means higher rank or closer social affiliation of early joiners could be among the factors of deciding whether to participate in movements by group members. When the number of early joiners reached or exceeded seven, which was the simple majority of the group studied, entire group movement always occurred, meaning that the quorum rule was used. Putting together, Macaca thibetana used a combination of selective mimetism and quorum, and early joiners played a key role in deciding which rule should be used. PMID:25992882

Recommending teams promotes prosocial lending in online microfinance

PubMed Central

Ai, Wei; Chen, Roy; Mei, Qiaozhu; Phillips, Webb

2016-01-01

This paper reports the results of a large-scale field experiment designed to test the hypothesis that group membership can increase participation and prosocial lending for an online crowdlending community, Kiva. The experiment uses variations on a simple email manipulation to encourage Kiva members to join a lending team, testing which types of team recommendation emails are most likely to get members to join teams as well as the subsequent impact on lending. We find that emails do increase the likelihood that a lender joins a team, and that joining a team increases lending in a short window (1 wk) following our intervention. The impact on lending is large relative to median lender lifetime loans. We also find that lenders are more likely to join teams recommended based on location similarity rather than team status. Our results suggest team recommendation can be an effective behavioral mechanism to increase prosocial lending. PMID:27974610

Reproductive performance of ewes grazing lucerne during different periods around mating.

PubMed

Robertson, S M; Clayton, E H; Friend, M A

2015-11-01

High intake of lucerne pastures or feeding of other high quality diets during early pregnancy may increase embryo mortality, negating any benefit of improved nutrition on ovulation rate in ewes. This study was conducted to determine whether grazing ewes on lucerne (Medicago sativa) pastures for 7 days prior to and throughout joining would result in greater foetal numbers than if ewes were removed 7 days after the commencement of joining, or if ewes grazed senescent pasture throughout the joining period. Merino ewes (300) were allocated to two replicates of three treatments, grazing pastures between Days -7 and 36 of an unsynchronised, natural autumn joining. Grazing lucerne to Day 7 of joining resulted in 30% more (P<0.05) foetuses per ewe than grazing senescent pasture (1.60±0.07 and 1.31±0.07, respectively), and 19% more lambs marked per ewe joined. Extending grazing of lucerne past Day 7 of joining did not result in additional foetuses per ewe (1.61±0.06) in comparison with only grazing lucerne to Day 7 of joining. Greater than 80% of ewes mated during the first 14 days of joining, and the proportions of ewes returning to oestrus and re-mating (0.18±0.022) and of non-pregnant (0.09±0.017) ewes were similar (P>0.05) among all treatment groups, suggesting no differences between treatments in embryo mortality. Grazing naturally cycling ewes on lucerne prior to and during joinings in autumn is recommended as a means to increase the number of lambs born, although additional gains may not be obtained by grazing past day seven of joining. Copyright © 2015 Elsevier B.V. All rights reserved.

Closeout Report: Experimental High Energy Physics Group at the University of South Alabama

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jenkins, Charles M; Godang, Romulus

The High Energy Physics group at the University of South Alabama has been supported by this research grant (DE-FG02-96ER40970) since 1996. One researcher, Dr. Merrill Jenkins, has been supported on this grant during this time worked on fixed target experiments at the Fermi National Accelerator Laboratory, west of Chicago, Illinois. These experiments have been E-705, E-771, E-871 (HyperCP) and E-921 (CKM) before it was canceled for budgetary reasons. After the cancellation of CKM, Dr. Jenkins joined the Compact Muon Solenoid (CMS) experiment as an associate member via the High Energy Physics Group at the Florida State University. A second, recentlymore » tenured faculty member, Dr. Romulus Godang joined the group in 2009 and has been supported by this grant since then. Dr. Godang is working on the BaBaR experiment at SLAC and has joined the Belle-II experiment located in Japan at KEK. According to the instructions sent to us by our grant monitor, we are to concentrate on the activities over the last three years in this closeout report.« less

Examining Decision Making Level of Wrestlers in Terms of Some Variable

ERIC Educational Resources Information Center

Yigit, Sihmehmet; Dalbudak, Ibrahim; Musa, Mihriay; Gürkan, Alper C.; Dalkiliç, Mehmet

2016-01-01

The aim of this research is to examine decision making level of wrestlers who joined Turkey inter university wrestling championship, according to variables as wrestlers' sex, age, grade, department, and education type. Study group consists of 34 females and 196 males, totally 230 athletes, who joined Turkey Inter University Wrestling Championship…

Zhiwen Ma | NREL

Science.gov Websites

-275-3784 Zhiwen joined the Thermal Systems Group in 2009 to work in the field of Concentrating Solar thermal management and packaging, and gas turbines. He taught in the Department of Engineering Mechanics book chapter, and was awarded two patents in the areas of fuel cells and thermal fluids. Before joining

Larval traits carry over to affect post-settlement behaviour in a common coral reef fish.

PubMed

Dingeldein, Andrea L; White, J Wilson

2016-07-01

Most reef fishes begin life as planktonic larvae before settling to the reef, metamorphosing and entering the benthic adult population. Different selective forces determine survival in the planktonic and benthic life stages, but traits established in the larval stage may carry over to affect post-settlement performance. We tested the hypothesis that larval traits affect two key post-settlement fish behaviours: social group-joining and foraging. Certain larval traits of reef fishes are permanently recorded in the rings in their otoliths. In the bluehead wrasse (Thalassoma bifasciatum), prior work has shown that key larval traits recorded in otoliths (growth rate, energetic condition at settlement) carry over to affect post-settlement survival on the reef, with higher-larval-condition fish experiencing less post-settlement mortality. We hypothesized that this selective mortality is mediated by carry-over effects on post-settlement antipredator behaviours. We predicted that better-condition fish would forage less and be more likely to join groups, both behaviours that would reduce predation risk. We collected 550 recently settled bluehead wrasse (Thalassoma bifasciatum) from three reef sites off St. Croix (USVI) and performed two analyses. First, we compared each settler's larval traits to the size of its social group to determine whether larval traits influenced group-joining behaviour. Secondly, we observed foraging behaviour in a subset of grouped and solitary fish (n = 14) for 1-4 days post-settlement. We then collected the fish and tested whether larval traits influenced the proportion of time spent foraging. Body length at settlement, but not condition, affected group-joining behaviour; smaller fish were more likely to remain solitary or in smaller groups. However, both greater length and better condition were associated with greater proportions of time spent foraging over four consecutive days post-settlement. Larval traits carry over to affect post-settlement behaviour, although not as we expected: higher quality larvae join groups more frequently (safer) but then forage more. Foraging is risky but may allow faster post-settlement growth, reducing mortality risk in the long run. This shows that behaviour likely serves as a mechanistic link connecting larval traits to post-settlement selective mortality. © 2016 The Authors. Journal of Animal Ecology © 2016 British Ecological Society.

Effects of rooting via out-groups on in-group topology in phylogeny.

PubMed

Ackerman, Margareta; Brown, Daniel G; Loker, David

2014-01-01

Users of phylogenetic methods require rooted trees, because the direction of time depends on the placement of the root. While phylogenetic trees are typically rooted by using an out-group, this mechanism is inappropriate when the addition of an out-group changes the in-group topology. We perform a formal analysis of phylogenetic algorithms under the inclusion of distant out-groups. It turns out that linkage-based algorithms (including UPGMA) and a class of bisecting methods do not modify the topology of the in-group when an out-group is included. By contrast, the popular neighbour joining algorithm fails this property in a strong sense: every data set can have its structure destroyed by some arbitrarily distant outlier. Furthermore, including multiple outliers can lead to an arbitrary topology on the in-group. The standard rooting approach that uses out-groups may be fundamentally unsuited for neighbour joining.

Your chance to shape the future of the RCN and the profession.

PubMed

2017-07-19

Offering you the chance to join a committee is unlikely to set your pulse racing, so let's put it another way: would you like to join a group of dynamic nurses who will help shape the future of the RCN and the wider nursing profession? If the answer is yes, then read on.

Reporting Multiple-Group Mean and Covariance Structure across Occasions with Structural Equation Modeling

ERIC Educational Resources Information Center

Okech, David

2012-01-01

Objectives: Using baseline and second wave data, the study evaluated the measurement and structural properties of parenting stress, personal mastery, and economic strain with N = 381 lower income parents who decided to join and those who did not join in a child development savings account program. Methods: Structural equation modeling mean and…

Synthesis, Structure, and Physical Properties for a Series of Monomeric Iron(III) Hydroxo Complexes with Varying Hydrogen-Bond Networks

PubMed Central

Mukherjee, Jhumpa; Lucas, Robie L.; Zart, Matthew K.; Powell, Douglas R.; Day, Victor W.; Borovik, A. S.

2013-01-01

Mononuclear iron(III) complexes with terminal hydroxo ligands are proposed to be important species in several metalloproteins, but they have been difficult to isolate in synthetic systems. Using a series of amidate/ureido tripodal ligands, we have prepared and characterized monomeric FeIIIOH complexes with similar trigonal-bipyramidal primary coordination spheres. Three anionic nitrogen donors define the trigonal plane, and the hydroxo oxygen atom is trans to an apical amine nitrogen atom. The complexes have varied secondary coordination spheres that are defined by intramolecular hydrogen bonds between the FeIIIOH unit and the urea NH groups. Structural trends were observed between the number of hydrogen bonds and the Fe–Ohydroxo bond distances: the more intramolecular hydrogen bonds there were, the longer the Fe–O bond became. Spectroscopic trends were also found, including an increase in the energy of the O–H vibrations with a decrease in the number of hydrogen bonds. However, the FeIII/II reduction potentials were constant throughout the series (∼2.0 V vs [Cp2Fe]0/+1), which is ascribed to a balancing of the primary and secondary coordination-sphere effects. PMID:18498155

Proceedings of the Conference on Computer Generated Forces and Behavioral Representation (5th), Held in Orlando, Florida, on 9-11 May 1995

DTIC Science & Technology

1995-05-01

ForeSight ( MECFS ). Prior to joining TASC, Mr. Stanzione served as the deputy director of the Semi-Automated Forces group at Loral Advanced Distributed...TASC’s other Synthetic Environment programs, including Weather in DIS (WINDS) and Multi-Echelon CFOR with ForeSight ( MECFS ). Prior to joining TASC, Mr

Laser welding of a cobalt-chromium removable partial denture alloy.

PubMed

NaBadalung, D P; Nicholls, J I

1998-03-01

The electric alloy brazed joints of removable partial denture alloys have failed frequently after routine usage. A technique providing higher joint strengths was investigated. This investigation compared the tensile strengths of electric-brazed and laser-welded joints for a cobalt-chromium removable partial denture alloy. Twenty-four cobalt-chromium standard tensile testing rods were prepared and divided into three groups of eight. All specimens in the control group (group 1) were left in the as-cast condition. Groups 2 and 3 were the test specimens, which were sectioned at the center of the rod. Eight specimens were joined by using electric brazing, and the remaining specimens were joined by using laser welding. After joining, each joint was ground to a uniform diameter, then tested to tensile failure on an Instron universal testing machine. Failure loads were recorded and fracture stress calculated. Statistical analysis was applied. The student-Newman-Keuls test showed a highly significant difference between the joint strengths of the as-cast control specimens, the electric-brazed and laser-welded joints. The tensile strengths of the as-cast joints were higher than those for the laser-welded joints, and both were higher than the electric-brazed joint strengths.

Joining, Leaving, and Staying in the American Indian/Alaska Native Race Category between 2000 and 2010

PubMed Central

Liebler, Carolyn A.; Bhaskar, Renuka; Porter (née Rastogi), Sonya R.

2017-01-01

Conceptualizing and operationalizing American Indian populations is challenging. Each census for decades has seen the American Indian population increase substantially more than expected, with indirect and qualitative evidence that this is due to changes in individuals' race responses. We apply uniquely suited (but not nationally representative) linked data from the 2000 and 2010 decennial censuses (N= 3.1 million) and the 2006–2010 American Community Survey (N = 188,131) to address three research questions. First, to what extent do American Indian people have different race responses across data sources? We find considerable race response change, especially among multiple-race and/or Hispanic American Indians. Second, how are people who change responses different from or similar to those who do not? We find three sets of American Indians: those who (1) had the same race and Hispanic responses in 2000 and 2010, (2) moved between single-race and multiple-race American Indian responses, and (3) added or dropped the American Indian response, thus joining or leaving the enumerated American Indian population. People in groups (1) and (2) were relatively likely to report a tribe, live in an American Indian area, report American Indian ancestry, and live in the West. Third, how are people who join a group different from or similar to those who leave it? Multivariate models show general similarity between joiners and leavers in group (1) and in group (2). Population turnover is hidden in cross-sectional comparisons; people joining each subpopulation of American Indians are similar in number and characteristics to those who leave it. PMID:26988712

Joining, Leaving, and Staying in the American Indian/Alaska Native Race Category Between 2000 and 2010.

PubMed

Liebler, Carolyn A; Bhaskar, Renuka; Porter, Sonya R

2016-04-01

Conceptualizing and operationalizing American Indian populations is challenging. Each census for decades has seen the American Indian population increase substantially more than expected, with indirect and qualitative evidence that this is due to changes in individuals' race responses. We apply uniquely suited (but not nationally representative) linked data from the 2000 and 2010 decennial censuses (N = 3.1 million) and the 2006-2010 American Community Survey (N = 188,131) to address three research questions. First, to what extent do American Indian people have different race responses across data sources? We find considerable race response change, especially among multiple-race and/or Hispanic American Indians. Second, how are people who change responses different from or similar to those who do not? We find three sets of American Indians: those who (1) had the same race and Hispanic responses in 2000 and 2010, (2) moved between single-race and multiple-race American Indian responses, and (3) added or dropped the American Indian response, thus joining or leaving the enumerated American Indian population. People in groups (1) and (2) were relatively likely to report a tribe, live in an American Indian area, report American Indian ancestry, and live in the West. Third, how are people who join a group different from or similar to those who leave it? Multivariate models show general similarity between joiners and leavers in group (1) and in group (2). Population turnover is hidden in cross-sectional comparisons; people joining each subpopulation of American Indians are similar in number and characteristics to those who leave it.

Physiologically based pharmacokinetic modelling of the three-step metabolism of pyrimidine using C-uracil as an in vivo probe.

PubMed

Ito, Suminobu; Kawamura, Takeshi; Inada, Makoto; Inoue, Yoshiharu; Hirao, Yukihiro; Koga, Toshihisa; Kunizaki, Jun-ichi; Shimizu, Takefumi; Sato, Hitoshi

2005-12-01

Approximately 80% of uracil is excreted as beta-alanine, ammonia and CO2 via three sequential reactions. The activity of the first enzyme in this scheme, dihydropyrimidine dehydrogenase (DPD), is reported to be the key determinant of the cytotoxicity and side-effects of 5-fluorouracil. The aim of the present study was to re-evaluate the pharmacokinetics of uracil and its metabolites using a sensitive assay and based on a newly developed, physiologically based pharmacokinetic (PBPK) model. [2-(13)C]Uracil was orally administrated to 12 healthy males at escalating doses of 50, 100 and 200 mg, and the concentrations of [2-(13)C]uracil, [2-(13)C]5,6-dihydrouracil and beta-ureidopropionic acid (ureido-(13)C) in plasma and urine and (13)CO2 in breath were measured by liquid chromatography-tandem mass spectrometry and gas chromatograph-isotope ratio mass spectrometry, respectively. The pharmacokinetics of [2-(13)C]uracil were nonlinear. The elimination half-life of [2-(13)C]5,6-dihydrouracil was 0.9-1.4 h, whereas that of [2-(13)C]uracil was 0.2-0.3 h. The AUC of [2-(13)C]5,6-dihydrouracil was 1.9-3.1 times greater than that of [2-(13)C]uracil, whereas that of ureido-(13)C was 0.13-0.23 times smaller. The pharmacokinetics of (13)CO2 in expired air were linear and the recovery of (13)CO2 was approximately 80% of the dose. The renal clearance of [2-(13)C]uracil was negligible. A PBPK model to describe (13)CO2 exhalation after orally administered [2-(13)C]uracil was successfully developed. Using [2-(13)C]uracil as a probe, this model could be useful in identifying DPD-deficient patients at risk of 5-fluorouracil toxicity.

Simpson-Arbuckle contact revisited in Northwest Oklahoma County, Oklahoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allison, M.D.; Allen, R.W.

The Joins Formation, the lowermost formation of the Simpson Group, is traditionally the least studied or understood of the Simpson formations. The Joins, not known to produce hydrocarbons in central Oklahoma, is frequently overlooked by those more interested in the productive Simpson formations above and the Arbuckle carbonates below. In a study of the lower Simpson to upper Arbuckle interval in northwestern Oklahoma County, Oklahoma, the Joins Formation was found to be present. The central Oklahoma section consists of interbedded gray, olive gray and green splintery moderately waxy shale, cream to light gray homogeneous microcrystallin dolomite, and microcrystalline to finemore » crystalline fossiliferous slightly glauconitic well cemented sandstones are also noted. The entire Joins Formation is moderately to very fossiliferous; primarily consisting of crinoids, ostracods, brachiopods, and trilobites. The ostracod fauna closely resembles and correlates with the Arbuckle Mountain section, which has been extensively studied over the years by such authors as Taff, Ulrich and Harris. Beneath the Joins in this area is a normal section of Arbuckle dolomites. Due to the absence of a basal sand in the Joins the separation of the Joins and Arbuckle, utilizing electric logs only, is frequently tenuous. In comparison with the Arbuckle, the Joins tends to have higher gamma ray and S.P. values. Other tools, such as resistivity, bulk density and photoelectric (PE), are frequently inconclusive. For geologists studying the Simpson-Arbuckle contact in central Oklahoma, the presence or absence of the Joins Formation is best determined through conventional lithologic and palenontologic sample identification techniques. Once this has been done, correlation of electric logs with this type log is possible for the local area.« less

In the Middle: Factors Affecting a Black Male's Decision to Join a Traditionally White Fraternity at a Large Diverse Institution

ERIC Educational Resources Information Center

Winkler, Matthew J.

2014-01-01

The purpose of this qualitative study is to examine the pre-college factors, attitudes, and experiences of black men who joined traditionally white fraternities (TWFs) at large public predominantly white institutions (PWIs) over approximately the past four decades. These factors, with special emphasis on issues of identity, self- and group-esteem,…

New diamine hardeners for epoxies

NASA Technical Reports Server (NTRS)

Bell, V. L.; St. Clair, T. L.

1977-01-01

Stronger amine-cured polyepoxides can be obtained by using those diaminobenzophenones and diaminodiphenylmethanes that have amine groups located at ortho or meta positions to carbonyl or methylene groups joining two benzene rings.

Chronic obstructive pulmonary disease

MedlinePlus

... fireplace and getting rid of other irritants Manage stress and your mood Use oxygen if prescribed for ... severe cases. Support Groups You can ease the stress of illness by joining a support group . Sharing ...

Using and joining a franchised private sector provider network in Myanmar.

PubMed

O'Connell, Kathryn; Hom, Mo; Aung, Tin; Theuss, Marc; Huntington, Dale

2011-01-01

Quality is central to understanding provider motivations to join and remain within a social franchising network. Quality also appears as a key issue from the client's perspective, and may influence why a client chooses to use a franchised provider over another type of provider. The dynamic relationships between providers of social franchising clinics and clients who use these services have not been thoroughly investigated in the context of Myanmar, which has an established social franchising network. This study examines client motivations to use a Sun Quality Health network provider and provider motivations to join and remain in the Sun Quality Health network. Taken together, these two aims provide an opportunity to explore the symbiotic relationship between client satisfaction and provider incentives to increase the utilization of reproductive health care services. Results from a series of focus group discussions with clients of reproductive health services and franchised providers shows that women chose health services provided by franchised private sector general practitioners because of its perceived higher quality, associated with the availability of effective, affordable, drugs. A key finding of the study is associated with providers. Provider focus group discussions indicate that a principle determinate for joining and remaining in the Sun Quality Health Network was serving the poor.

Using and Joining a Franchised Private Sector Provider Network in Myanmar

PubMed Central

O'Connell, Kathryn; Hom, Mo; Aung, Tin; Theuss, Marc; Huntington, Dale

2011-01-01

Background Quality is central to understanding provider motivations to join and remain within a social franchising network. Quality also appears as a key issue from the client's perspective, and may influence why a client chooses to use a franchised provider over another type of provider. The dynamic relationships between providers of social franchising clinics and clients who use these services have not been thoroughly investigated in the context of Myanmar, which has an established social franchising network. This study examines client motivations to use a Sun Quality Health network provider and provider motivations to join and remain in the Sun Quality Health network. Taken together, these two aims provide an opportunity to explore the symbiotic relationship between client satisfaction and provider incentives to increase the utilization of reproductive health care services. Methods and Findings Results from a series of focus group discussions with clients of reproductive health services and franchised providers shows that women chose health services provided by franchised private sector general practitioners because of its perceived higher quality, associated with the availability of effective, affordable, drugs. A key finding of the study is associated with providers. Provider focus group discussions indicate that a principle determinate for joining and remaining in the Sun Quality Health Network was serving the poor. PMID:22180781

Social Identity and Psychosis: Associations and Psychological Mechanisms.

PubMed

McIntyre, Jason C; Wickham, Sophie; Barr, Ben; Bentall, Richard P

2017-08-26

Humans possess a basic need to belong and will join groups even when they provide no practical benefit. Paranoid symptoms imply a disruption of the processes involved in belonging and social trust. Past research suggests that joining social groups and incorporating those groups into one's identity (social identification) promotes positive self-views and better physical and mental health. However, no research has investigated whether social identity is associated with paranoia, nor the mechanisms by which this effect may emerge. Here, we examined the relationship between social identity and mental health (paranoia, auditory verbal hallucinations [AVHs], and depression), and tested the mediating role of self-esteem. In study 1, we analyzed data collected from 4319 UK residents as part of the NIHR CLAHRC NWC Household Health Survey. Study 2 comprised data collected from 1167 students attending a large UK university. The studies provided convergent evidence that social identification reduces symptoms of paranoia and depression by furnishing people with self-esteem. There was no consistent effect of social identification on AVHs. People developing mental health assessments, treatments, and policies are encouraged to consider the notion that joining and identifying with social groups may reduce people's risk of paranoia and depression. © The Author 2017. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center.

Mental health awareness.

PubMed

2017-07-22

Independent, family-owned veterinary group White Cross Vets has been focusing on wellbeing. One of its clinic directors, Rob Reid, joined a group from the practice for some training in mental health awareness. British Veterinary Association.

A Comparative Study of Family Bereavement Groups.

ERIC Educational Resources Information Center

Hopmeyer, Estelle; Werk, Annette

1994-01-01

Examined five bereavement support groups, three of which focused on widows, family survivors of suicide, and family survivors of death of family member by cancer. Members of three groups tended to report strong satisfaction with group experience. Reasons for joining group and most valuable aspects of group experience varied as function of group…

From antisocial behavior to violence: a model for the amplifying role of coercive joining in adolescent friendships.

PubMed

Van Ryzin, Mark J; Dishion, Thomas J

2013-06-01

Aggression is one of the more stable characteristics of child and adolescent development, and violent behavior in early adulthood is often foreshadowed by aggressive behavior in childhood and early adolescence. Considerable evidence has linked coercive family interactions to aggressive behavior in childhood, but less research has been conducted on the joint role of family and peer interaction in the escalation of aggression to violence in adulthood. We coded family interactions at age 12-13 and friendship interaction at age 16-17 in a multiethnic sample of youth and families. Violence in young adulthood (age 22-23) was measured using self-report, criminal records, and parent report. We tested the hypothesis that a process of 'coercive joining' in friendship interactions mediated the relationship between coercive family interactions and serious violence. We found that observed coercive joining in friendships at age 16-17 predicted early-adulthood violent behavior over and above an established tendency toward antisocial behavior. We also found that observed coercive family interactions at age 12 predicted early-adulthood violence, and that coercive joining with friends fully mediated this link. These results significantly extend coercion theory by suggesting that coercive joining in the context of peer groups is an additional mechanism by which coercive processes in the family are extended and amplified to violent behavior in early adulthood. Our findings suggest the importance of addressing both individual interpersonal skills and self-organizing peer groups when intervening to prevent violent behavior. © 2012 The Authors. Journal of Child Psychology and Psychiatry © 2012 Association for Child and Adolescent Mental Health.

Azobenzene dye-coupled quadruply hydrogen-bonding modules as colorimetric indicators for supramolecular interactions.

PubMed

Zhang, Yagang; Zimmerman, Steven C

2012-01-01

The facile coupling of azobenzene dyes to the quadruply hydrogen-bonding modules 2,7-diamido-1,8-naphthyridine (DAN) and 7-deazaguanine urea (DeUG) is described. The coupling of azobenzene dye 2 to mono-amido DAN units 4, 7, and 9 was effected by classic 4-(dimethylamino)pyridine (DMAP)-catalyzed peptide synthesis with N-(3-dimethylaminopropyl)-N'-ethyl carbodiimide hydrochloride (EDC) as activating agent, affording the respective amide products 5, 8, and 10 in 60-71% yield. The amide linkage was formed through either the aliphatic or aromatic ester group of 2, allowing both the flexibility and absorption maximum to be tuned. Azobenzene dye 1 was coupled to the DeUG unit 11 by Steglich esterification to afford the product amide 12 in 35% yield. Alternatively, azobenzene dye 16 underwent a room-temperature copper-catalyzed azide-alkyne Huisgen cycloaddition with DeUG alkyne 17 to give triazole 18 in 71% yield. Azobenzene coupled DAN modules 5, 8, and 10 are bright orange-red in color, and azobenzene coupled DeUG modules 12 and 18 are orange-yellow in color. Azobenzene coupled DAN and DeUG modules were successfully used as colorimetric indicators for specific DAN-DeUG and DAN-UPy (2-ureido-4(1H)-pyrimidone) quadruply hydrogen-bonding interactions.

Azobenzene dye-coupled quadruply hydrogen-bonding modules as colorimetric indicators for supramolecular interactions

PubMed Central

Zhang, Yagang

2012-01-01

Summary The facile coupling of azobenzene dyes to the quadruply hydrogen-bonding modules 2,7-diamido-1,8-naphthyridine (DAN) and 7-deazaguanine urea (DeUG) is described. The coupling of azobenzene dye 2 to mono-amido DAN units 4, 7, and 9 was effected by classic 4-(dimethylamino)pyridine (DMAP)-catalyzed peptide synthesis with N-(3-dimethylaminopropyl)-N’-ethyl carbodiimide hydrochloride (EDC) as activating agent, affording the respective amide products 5, 8, and 10 in 60–71% yield. The amide linkage was formed through either the aliphatic or aromatic ester group of 2, allowing both the flexibility and absorption maximum to be tuned. Azobenzene dye 1 was coupled to the DeUG unit 11 by Steglich esterification to afford the product amide 12 in 35% yield. Alternatively, azobenzene dye 16 underwent a room-temperature copper-catalyzed azide–alkyne Huisgen cycloaddition with DeUG alkyne 17 to give triazole 18 in 71% yield. Azobenzene coupled DAN modules 5, 8, and 10 are bright orange–red in color, and azobenzene coupled DeUG modules 12 and 18 are orange–yellow in color. Azobenzene coupled DAN and DeUG modules were successfully used as colorimetric indicators for specific DAN–DeUG and DAN–UPy (2-ureido-4(1H)-pyrimidone) quadruply hydrogen-bonding interactions. PMID:22509220

Poly(sebacoyl diglyceride) Cross-Linked by Dynamic Hydrogen Bonds: A Self-Healing and Functionalizable Thermoplastic Bioelastomer.

PubMed

Chen, Shuo; Bi, Xiaoping; Sun, Lijie; Gao, Jin; Huang, Peng; Fan, Xianqun; You, Zhengwei; Wang, Yadong

2016-08-17

Biodegradable and biocompatible elastomers (bioelastomers) could resemble the mechanical properties of extracellular matrix and soft tissues and, thus, are very useful for many biomedical applications. Despite significant advances, tunable bioelastomers with easy processing, facile biofunctionalization, and the ability to withstand a mechanically dynamic environment have remained elusive. Here, we reported new dynamic hydrogen-bond cross-linked PSeD-U bioelastomers possessing the aforementioned features by grafting 2-ureido-4[1H]-pyrimidinones (UPy) units with strong self-complementary quadruple hydrogen bonds to poly(sebacoyl diglyceride) (PSeD), a refined version of a widely used bioelastomer poly(glycerol sebacate) (PGS). PSeD-U polymers exhibited stronger mechanical strength than their counterparts of chemically cross-linked PSeD and tunable elasticity by simply varying the content of UPy units. In addition to the good biocompatibility and biodegradability as seen in PSeD, PSeD-U showed fast self-healing (within 30 min) at mild conditions (60 °C) and could be readily processed at moderate temperature (90-100 °C) or with use of solvent casting at room temperature. Furthermore, the free hydroxyl groups of PSeD-U enabled facile functionalization, which was demonstrated by the modification of PSeD-U film with FITC as a model functional molecule.

Reversible Hydrolysis Reaction with the Spore Photoproduct under Alkaline Conditions.

PubMed

Adhikari, Surya; Lin, Gengjie; Li, Lei

2016-09-16

DNA lesions may reduce the electron density at the nucleobases, making them prone to further modifications upon the alkaline treatment. The dominant DNA photolesion found in UV-irradiated bacterial endospores is a thymine dimer, 5-thyminyl-5,6-dihydrothymine, i.e., the spore photoproduct (SP). Here we report a stepwise addition/elimination reaction in the SP hydrolysis product under strong basic conditions where a ureido group is added to the carboxyl moiety to form a cyclic amide, regenerating SP after eliminating a hydroxide ion. Direct amidation of carboxylic acids by reaction with amines in the presence of a catalyst is well documented; however, it is very rare for an amidation reaction to occur without activation. This uncatalyzed SP reverse reaction in aqueous solution is even more surprising because the carboxyl moiety is not a good electrophile due to the negative charge it carries. Examination of the base-catalyzed hydrolyses of two other saturated pyrimidine lesions, 5,6-dihydro-2'-deoxyuridine and pyrimidine (6-4) pyrimidone photoproduct, reveals that neither reaction is reversible even though all three hydrolysis reactions may share the same gem-diol intermediate. Therefore, the SP structure where the two thymine residues maintain a stacked conformation likely provides the needed framework enabling this highly unusual carboxyl addition/elimination reaction.

Russia joins Kazakh/Omani pipeline venture group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-08-03

Russia has agreed to become a founding partner in a joint venture pipeline project formed by Kazakhstan and Oman. The agreement, signed in Bermuda July 24, is related to Chevron Corp.'s further development of supergiant Tengiz and Korolev fields along the Caspian Sea coast in Kazakhstan. Azerbaijan last month signed an agreement to become a founding member of the group, accepting terms agreed to by original joint venturers Kazakhstan and Oman. Azerbaijan's new government still must formally ratify its agreement. In addition, Chevron in June signed a memorandum of understanding to join the group at a future date. This papermore » reports that each of the founding members holds an equal interest in Caspian Pipeline Consortium Ltd., which will operate as a limited liability company incorporated in Bermuda.« less

Predator avoidance as a function of flocking in the sexually dichromatic Hawaii akepa

USGS Publications Warehouse

Hart, P.J.; Freed, L.A.

2005-01-01

Hypotheses for joining a mixed-species bird flock consider each species as a single unit. In sexually dichromatic birds, differential conspicuousness between the sexes may result in differences in vigilance for predators. Aspects of the predator avoidance and foraging enhancement hypotheses for the selective value of joining a mixed-species flock were assessed for the strongly sexually dichromatic Hawaii akepa (Loxops coccineus coccineus). There was support for the primary predictions of the predator avoidance hypothesis: vigilance levels decreased with increasing group size, and with membership in a flock, but only for brightly colored adult males. There was little support for the hypothesis that the primary benefit of joining a mixed-species flock is to enhance foraging efficiency through "local enhancement".

Group Centric Information Sharing Using Hierarchical Models

DTIC Science & Technology

2011-01-01

enable people to create data using RDF, build vocabularies using web ontology language (OWL), write rules and query data stores using SPARQL [8...a strict joined and the document was added with a strict add. In order to represent the fact that an action is allowed (or not), we have created a...greatly improve the system’s readiness to handle any number of access decision queries . a. The pair is tested against the gSIS Join and Add semantics

26 CFR 1.267(f)-1 - Controlled groups.

Code of Federal Regulations, 2011 CFR

2011-04-01

... consolidated return principles. Under this section, S's loss or deduction from an intercompany sale is taken... controlled group and by disregarding whether any of the members join in filing consolidated returns. (2) S's... they remain in a controlled group relationship with each other. For example, corporations become...

Cosmonaut Aleksey Leonov joins belly dancer on stage at Folklife Festival

NASA Image and Video Library

1974-09-14

S74-28666 (14 Sept. 1974) --- Cosmonaut Aleksey A. Leonov, in one of the lighter moments of activity involving Soviet cosmonauts and American astronauts, joins a belly dancer on stage as several visitors to weekend activity at the site of San Antonio?s HemisFair look on. Leonov is commander of the Soviet Apollo-Soyuz Test Project (ASTP) crew. A group of cosmonauts is in this country training with American astronauts for the joint U.S.-USSR ASTP rendezvous and docking mission scheduled for the summer of 1975. The Lebanese dancing was just one feature among many during the Texas Folklife Festival, in which members of 26 ethnic groups participated.

Daniel J. Friedman | NREL

Science.gov Websites

solar cells for concentrator systems. One of his early focuses after joining the group was to adapt the J. Friedman Photo of Daniel J. Friedman. Daniel Friedman Group Research Manager III-Physics manager of the High Efficiency Crystalline Photovoltaics Group. He received his doctorate in applied

Carboxylate and amino group coated silver nanoparticles as joining materials for copper-to-copper silver joints.

PubMed

Oestreicher, A; Röhrich, T; Lerch, M

2012-12-01

Organic silver complexes are introduced where silver is linked either with a carboxyl group or with an amino group. Upon heating, nanoparticles are generated if the respective ligands are long enough to act as stabilizing agents in the nanoparticulate regime. With decomposition and volatilization of the organic material, the sintering of silver occurs. The thermal characteristics of the carboxylates silver-n-octanoate, silver-n-decanoate, and AgOOC(CH2OCH2)2CH2OCH3 are compared with silver-n-alkylamines (n = 8, 9, and 12), and their thermal behavior is discussed based on thermogravimetry (TG) measurements. The consecutive stages of a metallization process are addressed based on the properties of AgOOC(CH2OCH2)2CH2OCH3, and the usable effects of the individual phases of this metal organic compound are analyzed by cross-sectional scanning electron microscope (SEM) images of silver joints. Selection criteria are addressed based on the thermal behavior. A mechanism for the joining process is proposed, considering formation and sintering of the nanoparticles. It was found that the bulk material can be used for low-temperature joining processes. Strong adherence to copper as a basic material can be achieved.

The effectiveness of community-based rehabilitation programmes: an impact evaluation of a quasi-randomised trial.

PubMed

Mauro, Vincenzo; Biggeri, Mario; Deepak, Sunil; Trani, Jean-Francois

2014-11-01

Community-based rehabilitation (CBR) programmes have been described as highly effective means of promoting the rights and opportunities of persons with disabilities (PwD). Although CBR is often the main way in which PwD in low-income and middle-income countries access rehabilitation services, there is little literature providing rigorous evaluation of their impact on people's well-being. Data were collected in the Mandya and Ramanagar districts (Karnataka state, India), between December 2009 and May 2010. In total 2540 PwD were interviewed using stratified random sampling: 1919 CBR beneficiaries (who joined the programme between 1997 and 2009) and 621 persons who were living in villages not covered by the programme. We controlled for the systematic differences between people joining and not joining the programme using the propensity score matching method controlling for covariates at individual and village level. We evaluated the impact of the programme on the subgroups of PwD who are disadvantaged on the dimensions of interest: access to pensions, use of aid appliances, access to paid jobs and improvement in personal-practical autonomy after 4 and 7 years of joining the CBR. We observed a positive and significant impact of the programme on access to services, rights and opportunities of PwD. The results indicate that compared with the control group access to pensions and allowances, aid appliances, access to paid jobs and personal-practical autonomy increased by 29.7%, 9.4%, 12.3% and 36.2%, respectively, after 7 years. The CBR programme analysed has a positive impact on access to services and the well-being of PwD who are particularly deprived on outcomes of interest. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

The role of walkers' needs and expectations in supporting maintenance of attendance at walking groups: a longitudinal multi-perspective study of walkers and walk group leaders.

PubMed

Kassavou, Aikaterini; Turner, Andrew; French, David P

2015-01-01

There is good evidence that when people's needs and expectations regarding behaviour change are met, they are satisfied with that change, and maintain those changes. Despite this, there is a dearth of research on needs and expectations of walkers when initially attending walking groups and whether and how these needs and expectations have been satisfied after a period of attendance. Equally, there is an absence of research on how people who lead these groups understand walkers' needs and walk leaders' actions to address them. The present study was aimed at addressing both of these gaps in the research. Two preliminary thematic analyses were conducted on face-to-face interviews with (a) eight walkers when they joined walking groups, five of whom were interviewed three months later, and (b) eight walk leaders. A multi-perspective analysis building upon these preliminary analyses identified similarities and differences within the themes that emerged from the interviews with walkers and walk leaders. Walkers indicated that their main needs and expectations when joining walking groups were achieving long-term social and health benefits. At the follow up interviews, walkers indicated that satisfaction with meeting similar others within the groups was the main reason for continued attendance. Their main source of dissatisfaction was not feeling integrated in the existing walking groups. Walk leaders often acknowledged the same reasons for walkers joining and maintaining attendance at walking. However, they tended to attribute dissatisfaction and drop out to uncontrollable environmental factors and/or walkers' personalities. Walk leaders reported a lack of efficacy to effectively address walkers' needs. Interventions to increase retention of walkers should train walk leaders with the skills to help them modify the underlying psychological factors affecting walkers' maintenance at walking groups. This should result in greater retention of walkers in walking groups, thereby allowing walkers to receive the long-term social and health benefits of participation in these groups.

26 CFR 301.6226(b)-1 - 5-percent group.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 18 2011-04-01 2011-04-01 false 5-percent group. 301.6226(b)-1 Section 301.6226... ADMINISTRATION PROCEDURE AND ADMINISTRATION Assessment In General § 301.6226(b)-1 5-percent group. (a) In general. All members of a 5-percent group shall join in filing any petition for judicial review. The...

26 CFR 301.6226(b)-1 - 5-percent group.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 18 2014-04-01 2014-04-01 false 5-percent group. 301.6226(b)-1 Section 301.6226... ADMINISTRATION PROCEDURE AND ADMINISTRATION Assessment In General § 301.6226(b)-1 5-percent group. (a) In general. All members of a 5-percent group shall join in filing any petition for judicial review. The...

26 CFR 301.6226(b)-1 - 5-percent group.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 18 2012-04-01 2012-04-01 false 5-percent group. 301.6226(b)-1 Section 301.6226... ADMINISTRATION PROCEDURE AND ADMINISTRATION Assessment In General § 301.6226(b)-1 5-percent group. (a) In general. All members of a 5-percent group shall join in filing any petition for judicial review. The...

26 CFR 301.6226(b)-1 - 5-percent group.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false 5-percent group. 301.6226(b)-1 Section 301.6226... ADMINISTRATION PROCEDURE AND ADMINISTRATION Assessment In General § 301.6226(b)-1 5-percent group. (a) In general. All members of a 5-percent group shall join in filing any petition for judicial review. The...

A Brief Cognitive Behavioural Therapy Psychoeducational Group for Chinese People with Chronic Illnesses: An Evaluation Study

ERIC Educational Resources Information Center

Wong, Daniel F. K.; Ip, Priscilla S. Y.; Lee, Kim Man

2017-01-01

This pilot study attempted to examine the effectiveness of a brief cognitive behavioural therapy (CBT) psychoeducational group for Chinese people with chronic illness in Hong Kong. It adopted a single group design, and 52 participants joined the group. A questionnaire with three outcome measures, measuring general mental health, quality of life…

(2S)-2-(3-(1-Carboxy-5-(4-211At-Astatobenzamido)Pentyl)Ureido)-Pentanedioic Acid for PSMA-Targeted α-Particle Radiopharmaceutical Therapy

PubMed Central

Kiess, Ana P.; Minn, Il; Vaidyanathan, Ganesan; Hobbs, Robert F.; Josefsson, Anders; Shen, Colette; Brummet, Mary; Chen, Ying; Choi, Jaeyeon; Koumarianou, Eftychia; Baidoo, Kwamena; Brechbiel, Martin W.; Mease, Ronnie C.; Sgouros, George; Zalutsky, Michael R.

2016-01-01

Alpha-particle emitters have a high linear energy transfer and short range, offering the potential for treating micrometastases while sparing normal tissues. We developed a urea-based, 211At-labeled small molecule targeting prostate-specific membrane antigen (PSMA) for the treatment of micrometastases due to prostate cancer (PC). Methods: PSMA-targeted (2S)-2-(3-(1-carboxy-5-(4-211At-astatobenzamido)pentyl)ureido)-pentanedioic acid (211At-6) was synthesized. Cellular uptake and clonogenic survival were tested in PSMA-positive (PSMA+) PC3 PIP and PSMA-negative (PSMA−) PC3 flu human PC cells after 211At-6 treatment. The antitumor efficacy of 211At-6 was evaluated in mice bearing PSMA+ PC3 PIP and PSMA– PC3 flu flank xenografts at a 740-kBq dose and in mice bearing PSMA+, luciferase-expressing PC3-ML micrometastases. Biodistribution was determined in mice bearing PSMA+ PC3 PIP and PSMA– PC3 flu flank xenografts. Suborgan distribution was evaluated using α-camera images, and microscale dosimetry was modeled. Long-term toxicity was assessed in mice for 12 mo. Results: 211At-6 treatment resulted in PSMA-specific cellular uptake and decreased clonogenic survival in PSMA+ PC3 PIP cells and caused significant tumor growth delay in PSMA+ PC3 PIP flank tumors. Significantly improved survival was achieved in the newly developed PSMA+ micrometastatic PC model. Biodistribution showed uptake of 211At-6 in PSMA+ PC3 PIP tumors and in kidneys. Microscale kidney dosimetry based on α-camera images and a nephron model revealed hot spots in the proximal renal tubules. Long-term toxicity studies confirmed that the dose-limiting toxicity was late radiation nephropathy. Conclusion: PSMA-targeted 211At-6 α-particle radiotherapy yielded significantly improved survival in mice bearing PC micrometastases after systemic administration. 211At-6 also showed uptake in renal proximal tubules resulting in late nephrotoxicity, highlighting the importance of long-term toxicity studies and microscale dosimetry. PMID:27230930

Multifamily Group Psychoeducation in New York State: Implementation and Fidelity Outcomes.

PubMed

Kealey, Edith M; Leckman-Westin, Emily; Jewell, Thomas C; Finnerty, Molly T

2015-11-01

The study examined implementation outcomes from a large state initiative to support dissemination of multifamily group (MFG) psychoeducation in outpatient mental health settings. Thirty-one sites participated in the project. Baseline training in the MFG model was followed by monthly expert consultation delivered in either a group (16 sites) or individual format (15 sites). Research staff assessed fidelity to the MFG model by telephone at baseline and 12, 18, and 24 months and documented time to completion of three key milestones: holding a family joining session, a family educational workshop, and an MFG meeting. Intent-to-train analyses found that 12 sites (39%) achieved high fidelity to the MFG model, and 20 (65%) achieved moderate or high fidelity. Mean scores on the Family Psychoeducation Fidelity Assessment Scale increased over time. Twenty-five sites (81%) conducted at least one joining session, and 20 (65%) conducted at least one MFG. Mean±SD time from baseline to the first group was 11.75±4.78 months. Programs that held the first joining session within four to 12 months after training were significantly more likely than programs that did not to conduct a group (p<.05). No significant differences were found by consultation format. Implementation of moderate- to high-fidelity MFG programs in routine outpatient mental health settings is feasible. Sites that moved very quickly or very slowly in early implementation stages were less likely to be successful in conducting an MFG. More research on the efficiency and effectiveness of consultation formats is needed to guide future implementation efforts.

Sheila Grady-McBride | NREL

Science.gov Websites

the Thermochemical Group. Prior to joining the National Renewable Energy Laboratory (NREL), Grady -McBride most recently worked at The Beck Group as a project assistant. Before that she worked for 12 years Beck Group, 2006-2012 Executive Assistant, VP of Quality, VP of Human Resources, Director of Training

Free internet access, the digital divide, and health information.

PubMed

Wagner, Todd H; Bundorf, M Kate; Singer, Sara J; Baker, Laurence C

2005-04-01

The Internet has emerged as a valuable tool for health information. Half of the U.S. population lacked Internet access in 2001, creating concerns about those without access. Starting in 1999, a survey firm randomly invited individuals to join their research panel in return for free Internet access. This provides a unique setting to study the ways that people who had not previously obtained Internet access use the Internet when it becomes available to them. In 2001-2002, we surveyed 12,878 individuals 21 years of age and older on the research panel regarding use of the Internet for health; 8935 (69%) responded. We analyzed respondents who had no prior Internet access, and then compared this group to those who had prior Internet access. Among those newly provided free Internet access, 24% had used the Internet for health information in the past year, and users reported notable benefits, such as improved knowledge and self-care abilities. Not surprisingly, the no-prior-Internet group reported lower rates of using the Internet (24%) than the group that had obtained Internet access prior to joining the research panel (40%), but the 2 groups reported similar perceptions of the Internet and self-reported effects. Those who obtained Internet access for the first time by joining the panel used the Internet for health and appeared to benefit from it. Access helps explain the digital divide, although most people given free access do not use the Internet for health information.

Harriet Brooks: Canada's First Woman Physicist

NASA Astrophysics Data System (ADS)

Rayner-Canham, Geoffrey

2004-03-01

During those early halcyon days of the study of radioactivity, one young Canadian woman, Harriet Brooks, joined Ernest Rutherford's group as his first research student. Later, she joined J.J. Thomson's group in Cambridge and, finally, Marie Curie's group in Paris. During her short research career, she made several important contributions to science. She investigated the nature of 'emanation' from radium; discovered that radioactive substances could undergo successive decay; and first reported the recoil of the radioactive atom. Much of this research was published under her name alone though Rutherford made extensive reference to her discoveries in his Bakerian lecture of 1904. Brooks life is of interest not only in what she accomplished, but also in the challenges she faced as a pioneering woman scientist in the early part of the twentieth century. In the presentation we will blend the account of her life and work with the societal context. This work was accomplished jointly with Marelene F. Rayner-Canham.

Joining up with "Not Us" Staff to Run Adolescent Groups in Schools

ERIC Educational Resources Information Center

Sayder, Suzan

2008-01-01

The author describes the development of a model for working with staff members from non-psychoanalytic backgrounds to run therapeutic and therapy-like pupil groups in schools. She draws on her experience of co-facilitating groups at a London-based secondary school and uses examples from recent group work with Year 10 pupils (aged 14-15). Child…

77 FR 64115 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-18

... with power to vote), and Goodman Group Management Deferred Compensation Rabbi Trust Plan, F/B/O Dan..., Arizona, trustee; Dan Peterka with power to vote); to join the Peterka Family Group to acquire voting...

Characterization of 2,4-Diamino-6-oxo-1,6-dihydropyrimidin-5-yl Ureido Based Inhibitors of Trypanosoma brucei FolD and Testing for Antiparasitic Activity

PubMed Central

2015-01-01

The bifunctional enzyme N5,N10-methylenetetrahydrofolate dehydrogenase/cyclo hydrolase (FolD) is essential for growth in Trypanosomatidae. We sought to develop inhibitors of Trypanosoma brucei FolD (TbFolD) as potential antiparasitic agents. Compound 2 was synthesized, and the molecular structure was unequivocally assigned through X-ray crystallography of the intermediate compound 3. Compound 2 showed an IC50 of 2.2 μM, against TbFolD and displayed antiparasitic activity against T. brucei (IC50 49 μM). Using compound 2, we were able to obtain the first X-ray structure of TbFolD in the presence of NADP+ and the inhibitor, which then guided the rational design of a new series of potent TbFolD inhibitors. PMID:26322631

Tuberculosis among physicians in training.

PubMed

Rao, K G; Aggarwal, A N; Behera, D

2004-11-01

A total of 478 resident doctors working at our hospital were interviewed regarding development of tuberculosis after joining the hospital. Nine residents had developed tuberculosis, yielding an overall risk of 11.2 cases per 1000 person-years of exposure. Another 231 resident doctors newly admitted to the residency programme over a 1-year period were prospectively followed up over the next year. Four residents in this group developed tuberculosis within 1 year of joining the hospital, yielding an overall incidence of 17.3/1000. Physicians in training have a high risk of developing active tuberculosis after nosocomial transmission.

Effect of addition of plants-derived polyamide 11 elastomer on the mechanical and tribological properties of hemp fiber reinforced polyamide 1010 composites

NASA Astrophysics Data System (ADS)

Mukaida, Jun; Nishitani, Yosuke; Kitano, Takeshi

2015-05-01

For the purpose of developing the new engineering materials such as structural materials and tribomaterials based on all plants-derived materials, the effect of the addition of plant-derived polyamide 11 Elastomer (PA11E) on the mechanical and tribological properties of hemp fiber(HF) reinforced polyamide 1010 (HF/PA1010) composites was investigated. PA1010 and PA11E (except the polyether groups used as soft segment) were made from plant-derived castor oil. Hemp fiber was surface-treated by two types of treatment: alkali treatment by NaOH solution and surface treatment by ureido silane coupling agent. HF/PA1010/PA11E ternary composites were extruded by a twin screw extruder and injection-molded. Their mechanical properties such as tensile, bending, Izod impact and tribological properties by ring-on-plate type sliding wear testing were evaluated. The effect of the addition of PA11E on the mechanical and tribological properties of HF/PA1010 composite differed for each property. Izod impact strength and specific wear rate improved with the addition of PA11E although tensile strength, modulus, and friction coefficient decreased with PA11E. It follows from these results that it may be possible to develop the new engineering materials with sufficient balance between mechanical and tribological properties.

Illness and Prevention: Self-Help Groups for Families Faced with Scoliosis.

ERIC Educational Resources Information Center

Hinrichsen, Gregory A.; And Others

The purpose of this study was to determine what kinds of people are motivated to join a medical self-help group and whether and in what areas of psychological and social functioning such self-help groups have positive benefits for adolescents and their families. Extensive survey questionnaires were sent throughout the United States to all former…

Voluntary Group Participation by Third Age Australians.

ERIC Educational Resources Information Center

Mayhew, Claire; Swindell, Rick

A study investigated characteristics of retirees and types of voluntary groups they joined after retirement. Data were collected through face-to-face interviews and completed questionnaires of 206 Australians over age 50. Five categories of voluntary organizations were studied: intellectually challenging, sporting/exercise, social, helping others,…

Developing Local Community Leaders.

ERIC Educational Resources Information Center

Dyer, Delwyn A.; Williams, Oscar M.

The successful development of local leaders is the goal of leadership training and community development. Development involves defining and developing leadership. Although leader-centered leadership offers few chances of meeting the maintenance needs of the group as a whole, shared leadership allows the group to join in the decision-making…

Tensile strength and corrosion resistance of brazed and laser-welded cobalt-chromium alloy joints.

PubMed

Zupancic, Rok; Legat, Andraz; Funduk, Nenad

2006-10-01

The longevity of prosthodontic restorations is often limited due to the mechanical or corrosive failure occurring at the sites where segments of a metal framework are joined together. The purpose of this study was to determine which joining method offers the best properties to cobalt-chromium alloy frameworks. Brazed and 2 types of laser-welded joints were compared for their mechanical and corrosion characteristics. Sixty-eight cylindrical cobalt-chromium dental alloy specimens, 35 mm long and 2 mm in diameter, were cast. Sixteen specimens were selected for electrochemical measurements in an artificial saliva solution and divided into 4 groups (n=4). In the intact group, the specimens were left as cast. The specimens of the remaining 3 groups were sectioned at the center, perpendicular to the long-axis, and were subsequently rejoined by brazing (brazing group) or laser welding using an X- or I-shaped joint design (X laser and I laser groups, respectively). Another 16 specimens were selected for electrochemical measurements in a more acidic artificial saliva solution. These specimens were also divided into 4 groups (n=4) as described above. Electrochemical impedance spectroscopy and potentiodynamic polarization were used to assess corrosion potentials, breakdown potentials, corrosion current densities, total impedances at lowest frequency, and polarization charge-transfer resistances. The remaining 36 specimens were used for tensile testing. They were divided into 3 groups in which specimen pairs (n=6) were joined by brazing or laser welding to form 70-mm-long cylindrical rods. The tensile strength (MPa) was measured using a universal testing machine. Differences between groups were analyzed using 1-way analysis of variance (alpha=.05). The fracture surfaces and corrosion defects were examined with a scanning electron microscope. The average tensile strength of brazed joints was 792 MPa and was significantly greater (P<.05) than the tensile strength of both types of laser-welded joints (404 MPa and 405 MPa). When laser welding was used, successful joining was limited to the peripheral aspects of the weld. The welding technique did not significantly affect the joint tensile strength. Electrochemical measurements indicated that the corrosion resistance of the laser-welded joints was better than of the brazed ones, primarily due to differences in passivation ability. Laser welding provides excellent corrosion resistance to cobalt-chromium alloy joints, but strength is limited due to the shallow weld penetration. Brazed joints are less resistant to corrosion but have higher tensile strength than laser welds.

Japanese and Korean Nursing Students' Motivation for Joining Disaster Relief Activities as Nurses in the Future.

PubMed

Choe, Myoung-Ae; Kuwano, Noriko; Bang, Kyung-Sook; Cho, Mi-Kyoung; Yatsushiro, Rika; Kawata, Yuki

The purpose of this study was to identify differences in motivation for joining disaster relief activities as a nurse in the future between Japanese and Korean nursing students. A descriptive 2-group comparative study design was used. The participants were 721 first- to fourth-year nursing students (Japanese, n = 324; Korean, n = 397). From June to September 2014, data were collected through a researcher-administered questionnaire and self-reported answers. The collected data were analyzed by descriptive statistics, the χ test, and the t test.No significant difference was found between Japanese and Korean students in motivation to join domestic relief activities should a disaster occur in the area in which they lived. Compared with Korean students, Japanese students strongly agreed that it is necessary to carry out relief work across borders when disasters occur in foreign countries (p = .001). Meanwhile, Japanese students showed less motivation than Korean students to join relief activities in other domestic areas and foreign countries (p = .020).The results of this study suggest that the motivation of Japanese students to join disaster relief activities as nurses in the future should a disaster occur in other domestic areas and foreign countries needs to be increased. The results also suggest that undergraduate students should be well prepared for disasters through disaster nursing education, including practical training, disaster drills, and simulation.

Human mtDNA hypervariable regions, HVR I and II, hint at deep common maternal founder and subsequent maternal gene flow in Indian population groups.

PubMed

Sharma, Swarkar; Saha, Anjana; Rai, Ekta; Bhat, Audesh; Bamezai, Ramesh

2005-01-01

We have analysed the hypervariable regions (HVR I and II) of human mitochondrial DNA (mtDNA) in individuals from Uttar Pradesh (UP), Bihar (BI) and Punjab (PUNJ), belonging to the Indo-European linguistic group, and from South India (SI), that have their linguistic roots in Dravidian language. Our analysis revealed the presence of known and novel mutations in both hypervariable regions in the studied population groups. Median joining network analyses based on mtDNA showed extensive overlap in mtDNA lineages despite the extensive cultural and linguistic diversity. MDS plot analysis based on Fst distances suggested increased maternal genetic proximity for the studied population groups compared with other world populations. Mismatch distribution curves, respective neighbour joining trees and other statistical analyses showed that there were significant expansions. The study revealed an ancient common ancestry for the studied population groups, most probably through common founder female lineage(s), and also indicated that human migrations occurred (maybe across and within the Indian subcontinent) even after the initial phase of female migration to India.

Prashant Sharan | NREL

Science.gov Websites

Engineering Prashant.Sharan@nrel.gov | 303-275-3067 Prashant Sharan joined the Thermal Systems Group at NREL ), and solar thermal system. Prashant developed analytical methodologies for optimal integration of

Pediatric MS

MedlinePlus

... Disease T Cells d What Causes MS? Disproved Theories Viruses Clusters d Who Gets MS? Pediatric MS ... Community at MSconnection.org Join a Local Support Group Peer Connections: One-on-One Edward M. Dowd ...

Chris Colgan | NREL

Science.gov Websites

Colgan Photo Chris Colgan Chris Colgan Business Support II-Administrative Associate Chris.Colgan @nrel.gov | 303-384-7440 Chris joined NREL in January 2017. She provides support for the group manager , engineers, and researchers in the Residential Buildings Research Group and Building America Program. Chris

Asynchronous Group Review of EFL Writing: Interactions and Text Revisions

ERIC Educational Resources Information Center

Saeed, Murad Abdu; Ghazali, Kamila

2017-01-01

The current paper reports an empirical study of asynchronous online group review of argumentative essays among nine English as foreign language (EFL) Arab university learners joining English in their first, second, and third years at the institution. In investigating online interactions, commenting patterns, and how the students facilitate text…

Research Staff | Concentrating Solar Power | NREL

Science.gov Websites

Research Staff Research Staff Photo of Mark Mehos Mark Mehos Group Manager, Thermal Systems R&D Mark joined NREL in 1986 and manages the Thermal Systems R&D group at NREL, which includes the for the International Energy Agency's SolarPACES "Solar Thermal Electric Power Systems" task

Characteristics of physicians and patients who join team-based primary care practices: evidence from Quebec's Family Medicine Groups.

PubMed

Coyle, Natalie; Strumpf, Erin; Fiset-Laniel, Julie; Tousignant, Pierre; Roy, Yves

2014-06-01

New models of delivering primary care are being implemented in various countries. In Quebec, Family Medicine Groups (FMGs) are a team-based approach to enhance access to, and coordination of, care. We examined whether physicians' and patients' characteristics predicted their participation in this new model of primary care. Using provincial administrative data, we created a population cohort of Quebec's vulnerable patients. We collected data before the advent of FMGs on patients' demographic characteristics, chronic illnesses and health service use, and their physicians' demographics, and practice characteristics. Multivariate regression was used to identify key predictors of joining a FMG among both patients and physicians. Patients who eventually enrolled in a FMG were more likely to be female, reside outside of an urban region, have a lower SES status, have diabetes and congestive heart failure, visit the emergency department for ambulatory sensitive conditions and be hospitalized for any cause. They were also less likely to have hypertension, visit an ambulatory clinic and have a usual provider of care. Physicians who joined a FMG were less likely to be located in urban locations, had fewer years in medical practice, saw more patients in hospital, and had patients with lower morbidity. Physicians' practice characteristics and patients' health status and health care service use were important predictors of joining a FMG. To avoid basing policy decisions on tenuous evidence, policymakers and researchers should account for differential selection into team-based primary health care models. Copyright © 2014. Published by Elsevier Ireland Ltd.

Decision counseling and participation in a pancreas cancer registry.

PubMed

Myers, Ronald; Lavu, Harish; Keith, Scott W; Kelly, Heidi; O'Rourke, Nadine; Cocroft, James; Quinn, Anna; Potluri, Vishnu; Yeo, Charles J

2014-01-01

Cancer registries play a vital role in research, as they provide important data that can be used to assess disease etiology and risk. Specialty registries can help to address the need for information on defined cancer types. However, achieving high rates of participation in such registries is problematic.We studied the impact of decision support on patient participation in a hospital-based pancreas cancer registry, the Jefferson Pancreas Tumor Registry (JPTR). In this study, we assembled a nonrandomized cohort of 40 patients, of whom 20 were exposed to the intervention and 20 were exposed to routine recruiting methods. Patients in the control group were invited to join the JPTR; while those in the intervention group were also invited to join the JPTR, and received decision support related to participation. Registry participation was assessed at 90 days. At baseline, patient gender, race, and stage of pancreatic cancer did not vary significantly between study groups. Overall, participation in the intervention group was significantly higher (P = 0.01) than in the control group (55% and 10%, respectively). In the intervention group, altruism was the major factor motivating patient participation, while patient concerns related to treatment recovery, registration time and complexity, and the confidentiality of registry data discouraged participation.

What if cancer comes back?

MedlinePlus

... And there is some evidence that a diet rich in fruits and vegetables and low in saturated ... about your feelings with friends and family members. Think about joining a cancer support group or seeing ...

When your baby is stillborn

MedlinePlus

... to: Pay attention to your health. Eat and sleep well so your body stays strong. Find ways to express your feelings. Joining a support group, talking to family and friends, and keeping a journal ...

Joining Forces with the Arts Community.

ERIC Educational Resources Information Center

Wenner, Gene C.

1988-01-01

Proposes how music educators and arts administrators can work together to improve arts education. Recommends development of lobbying groups, and suggests ways of forming community attitudes to increase support for arts education. (LS)

Hydrolysis of Dihydrouridine and Related Compounds

NASA Technical Reports Server (NTRS)

House, Christopher H.; Miller, Stanley L.

1996-01-01

Dihydrouridine is absent from the tRNA of almost all hyperthermophiles and most Archaea but is ubiquitous in the tRNA of Eubacteria and Eukaryotes. In order to investigate whether this could be due to instability, the rate of ring opening of dihydrouridine was measured between 25 and 120 C. The dihydrouridine ring is stable at 25 C, but the half-life at 100 C and pH 7 is 9.1 h, which is comparable to the doubling time of hyperthermophiles. This suggests an explanation for the absence of dihydrouridine from the tRNA of hyperthermophiles. The rates of ring opening of dihydrouracil, dihydrothymine, and 1-N-methyldihydrouracil were measured at 100 C and pH 6-9, as were the equilibrium constants for ring closure of the ureido acids to the dihydrouracils. The pH rate profiles for ring opening and ring closing were calculated from the data. Possible roles for dihydrouracils in the pre-RNA world are discussed.

Excited-State Dynamics of Dithienylethenes Functionalized for Self-Supramolecular Assembly.

PubMed

Hamdi, I; Buntinx, G; Poizat, O; Perrier, A; Le Bras, L; Delbaere, S; Barrau, S; Louati, M; Takeshita, M; Tokushige, K; Takao, M; Aloïse, S

2018-04-12

The photoswitching and competitive processes of two photochromic dithienylethenes (DTEs) functionalized at both sides with 2-ureido-4[1H]-pyrimidone (UPy) quadruple hydrogen-bonding recognition patterns have been investigated with NMR experiments, ultrafast spectroscopy, and density functional theory (DFT) calculations. The originality of these molecules is their ability to form large supramolecular assemblies induced by light for the closed form (CF) species while the open form (OF) species exist as small oligomers. Photochromic parameters have been determined and photochemical pathways have been rationalized with clear distinction between the antiparallel (OF-AP) and parallel (OF-P) species. A new photocyclization pathway via triplet manifold has been evidenced. The effect of the supramolecular assembly on the photochemical response is discussed. Unlike the photoreversion process, which is unaffected by supramolecular assembly, rate constants of the photocyclization reaction and intersystem crossing process are sensitive to the presence of small OF oligomers.

Discovery of novel high potent and cellular active ADC type PTP1B inhibitors with selectivity over TC-PTP via modification interacting with C site.

PubMed

Du, Yongli; Zhang, Yanhui; Ling, Hao; Li, Qunyi; Shen, Jingkang

2018-01-20

PTP1B serving as a key negative regulator of insulin signaling is a novel target for type 2 diabetes and obesity. Modification at ring B of N-{4-[(3-Phenyl-ureido)-methyl]-phenyl}-methane-sulfonamide template to interact with residues Arg47 and Lys41 in the C site of PTP1B by molecular docking aided design resulted in the discovery of a series of novel high potent and selective inhibitors of PTP1B. The structure activity relationship interacting with the C site of PTP1B was well illustrated. Compounds 8 and 18 were shown to be the high potent and most promising PTP1B inhibitors with cellular activity and great selectivity over the highly homologous TCPTP and other PTPs. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Tips for Cutting Down on Drinking

MedlinePlus

... card in your wallet, check marks on a kitchen calendar, or a personal digital assistant. If you ... help, such as a spouse or non-drinking friends. Joining Alcoholics Anonymous or another mutual support group ...

The Impact of Video-Based Materials on Chinese-Speaking Learners' English Text Comprehension

ERIC Educational Resources Information Center

Lin, Lu-Fang

2016-01-01

This study investigated whether video-based materials can facilitate second language learners' text comprehension at the levels of macrostructure and microstructure. Three classes inclusive of 98 Chinese-speaking university students joined this study. The three classes were randomly assigned to three treatment groups: on-screen text (T Group),…

Fresh Start: Evaluation Report and Executive Summary

ERIC Educational Resources Information Center

Gorard, Stephen; Siddiqui, Nadia; See, Beng Huat

2015-01-01

Fresh Start (FS) is a catch-up literacy intervention for pupils at risk of falling behind their peers in early secondary schooling. It provides systematic and rigorous practice in phonics so that pupils are at an appropriate level to join the mainstream group after completion of the intervention. Pupils are assessed and then grouped according to…

'Can I Join the Club?': A Social Integration Scheme for Adolescents with Asperger Syndrome.

ERIC Educational Resources Information Center

Broderick, Claire; Caswell, Robert; Gregory, Sarah; Marzolini, Sarah; Wilson, Olwen

2002-01-01

This British study evaluated benefits of providing adolescents with Asperger syndrome with social skills training within a youth group setting. Participants maintained excellent attendance at both social skill and youth groups and increased both their social skills and self-confidence. Adult "helpers" reported that youths' support needs…

The Development of Logical Structures for E-Learning Evaluation

ERIC Educational Resources Information Center

Tudevdagva, Uranchimeg; Hardt, Wolfram; Dolgor, Jargalmaa

2013-01-01

This paper deals with development of logical structures for e-learning evaluation. Evaluation is a complex task into which many different groups of people are involved. As a rule these groups have different understanding and varying expectations on e-learning evaluation. Using logical structures for e-learning evaluation we can join the different…

78 FR 38038 - Change in Bank Control Notices; Formations of, Acquisitions by, and Mergers of Bank Holding...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

... Livingston, Tennessee; to join the currently approved control group of The Jack Windle Irrevocable Life.... Collectively, the new control group controls 100 percent of the voting shares of Overton Financial Services... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Formations of, Acquisitions by, and Mergers...

20 CFR 205.3 - Factors considered in determining employee representative status.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., representative of crafts or classes of employees in the railroad industry; (h) The extent to which the purposes... railroad industry as indicated by: (1) The specific employee group(s) represented; and (2) The proportion..., or sleeping car company, directly or indirectly, in its formation, in influencing employees to join...

20 CFR 205.3 - Factors considered in determining employee representative status.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., representative of crafts or classes of employees in the railroad industry; (h) The extent to which the purposes... railroad industry as indicated by: (1) The specific employee group(s) represented; and (2) The proportion..., or sleeping car company, directly or indirectly, in its formation, in influencing employees to join...

20 CFR 205.3 - Factors considered in determining employee representative status.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., representative of crafts or classes of employees in the railroad industry; (h) The extent to which the purposes... railroad industry as indicated by: (1) The specific employee group(s) represented; and (2) The proportion..., or sleeping car company, directly or indirectly, in its formation, in influencing employees to join...

20 CFR 205.3 - Factors considered in determining employee representative status.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., representative of crafts or classes of employees in the railroad industry; (h) The extent to which the purposes... railroad industry as indicated by: (1) The specific employee group(s) represented; and (2) The proportion..., or sleeping car company, directly or indirectly, in its formation, in influencing employees to join...

20 CFR 205.3 - Factors considered in determining employee representative status.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., representative of crafts or classes of employees in the railroad industry; (h) The extent to which the purposes... railroad industry as indicated by: (1) The specific employee group(s) represented; and (2) The proportion..., or sleeping car company, directly or indirectly, in its formation, in influencing employees to join...

Ambient belonging: how stereotypical cues impact gender participation in computer science.

PubMed

Cheryan, Sapna; Plaut, Victoria C; Davies, Paul G; Steele, Claude M

2009-12-01

People can make decisions to join a group based solely on exposure to that group's physical environment. Four studies demonstrate that the gender difference in interest in computer science is influenced by exposure to environments associated with computer scientists. In Study 1, simply changing the objects in a computer science classroom from those considered stereotypical of computer science (e.g., Star Trek poster, video games) to objects not considered stereotypical of computer science (e.g., nature poster, phone books) was sufficient to boost female undergraduates' interest in computer science to the level of their male peers. Further investigation revealed that the stereotypical broadcast a masculine stereotype that discouraged women's sense of ambient belonging and subsequent interest in the environment (Studies 2, 3, and 4) but had no similar effect on men (Studies 3, 4). This masculine stereotype prevented women's interest from developing even in environments entirely populated by other women (Study 2). Objects can thus come to broadcast stereotypes of a group, which in turn can deter people who do not identify with these stereotypes from joining that group.

Get connected: New Fall Meeting technology

NASA Astrophysics Data System (ADS)

Moscovitch, Mirelle

2012-11-01

Kick off your 2012 Fall Meeting experience today by joining the Fall Meeting Community, an interactive Web-based community. Whether you are attending this year's Fall Meeting or are just interested in learning more, this site can help you connect with colleagues, learn about the groundbreaking research and amazing programming being presented in San Francisco, and plan your trip to the largest Earth and space science conference of the year. Available through the Fall Meeting Web site (http://fallmeeting.agu.org), the Community allows you to share your Fall Meeting experience like never before. You can join groups based on your interests, and each group includes a message board that allows you to ask questions, post comments, discuss presentations, and make plans with colleagues. You can also create your own groups and use the Community's robust search engine to find and connect with friends. And because the Fall Meeting Web site was improved for 2012 to allow for nearly seamless functionality on mobile devices, you can access much of the same Community functionality on the go.

Torsional Shear Strength Tests for Glass-Ceramic Joined Silicon Carbide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ferraris, Monica; Ventrella, Andrea; Salvo, Milena

2014-03-17

A torsion test on hour-glass-shaped samples with a full joined or a ring-shaped joined area was chosen in this study to measure shear strength of glass-ceramic joined silicon carbide. Shear strength of about 100 MPa was measured for full joined SiC with fracture completely inside their joined area. Attempts to obtain this shear strength with a ring-shaped joined area failed due to mixed mode fractures. However, full joined and ring-shaped steel hour-glasses joined by a glass-ceramic gave the same shear strength, thus suggesting that this test measures shear strength of joined components only when their fracture is completely inside theirmore » joined area.« less

NACA Pilots at the Aircraft Engine Research Laboratory

NASA Image and Video Library

1945-07-21

The Aircraft Engine Research Laboratory’s pilot corps during the final days of World War II: from left to right, Joseph Vensel, Howard Lilly, William Swann, and Joseph Walker. William “Eb” Gough joined the group months after this photograph. These men were responsible for flying the various National Advisory Committee for Aeronautics (NACA) aircraft to test new engine modifications, study ice buildup, and determine fuel performance. Vensel, a veteran pilot from Langley, was the Chief of Flight Operations and a voice of reason at the laboratory. In April 1947 Vensel was transferred to lead the new Muroc Flight Tests Unit in California until 1966. Lilly was a young pilot with recent Navy experience. Lilly also flew in the 1946 National Air Races. He followed Vensel to Muroc in July 1947 where he became the first NACA pilot to penetrate the sound barrier. On May 3, 1948, Lilly became the first NACA pilot to die in the line of duty. Swann was a young civilian pilot when he joined the NACA. He spent his entire career at the Cleveland laboratory, and led the flight operations group from the early 1960s until 1979. Two World War II veterans joined the crew after the war. Walker was a 24-year-old P–38 reconnaissance pilot. He joined the NACA as a physicist in early 1945 but soon worked his way into the cadre of pilots. Walker later gained fame as an X-plane pilot at Muroc and was killed in a June 1966 fatal crash. Gough survived being shot down twice during the war and was decorated for flying rescue missions in occupied areas.

A group arrival retrial G - queue with multi optional stages of service, orbital search and server breakdown

NASA Astrophysics Data System (ADS)

Radha, J.; Indhira, K.; Chandrasekaran, V. M.

2017-11-01

A group arrival feedback retrial queue with k optional stages of service and orbital search policy is studied. Any arriving group of customer finds the server free, one from the group enters into the first stage of service and the rest of the group join into the orbit. After completion of the i th stage of service, the customer under service may have the option to choose (i+1)th stage of service with θi probability, with pI probability may join into orbit as feedback customer or may leave the system with {q}i=≤ft\\{\\begin{array}{l}1-{p}i-{θ }i,i=1,2,\\cdots k-1\\ 1-{p}i,i=k\\end{array}\\right\\} probability. Busy server may get to breakdown due to the arrival of negative customers and the service channel will fail for a short interval of time. At the completion of service or repair, the server searches for the customer in the orbit (if any) with probability α or remains idle with probability 1-α. By using the supplementary variable method, steady state probability generating function for system size, some system performance measures are discussed.

Participation in voluntary and community organisations in the United Kingdom and the influences on the self-management of long-term conditions.

PubMed

Jeffries, Mark; Mathieson, Amy; Kennedy, Anne; Kirk, Susan; Morris, Rebecca; Blickem, Christian; Vassilev, Ivalyo; Rogers, Anne

2015-05-01

Voluntary and community organisations (VCOs) have health benefits for those who attend and are viewed as having the potential to support long-term condition management. However, existing community-level understandings of participation do not explain the involvement with VCOs at an individual level, or the nature of support, which may elicit health benefits. Framing active participation as 'doing and experiencing', the aim of this qualitative study was to explore why people with long-term vascular conditions join VCOs, maintain their membership and what prevents participation. Twenty participants, self-diagnosed as having diabetes, chronic heart disease or chronic kidney disease, were purposefully sampled and recruited from a range of VCOs in the North West of England identified from a mapping of local organisations. In semi-structured interviews, we explored the nature of their participation. Analysis was thematic and iterative involving a continual reflection on the data. People gave various reasons for joining groups. These included health and well-being, the need for social contact and pursuing a particular hobby. Barriers to participation included temporal and spatial barriers and those associated with group dynamics. Members maintained their membership on the basis of an identity and sense of belonging to the group, developing close relationships within it and the availability of support and trust. Participants joined community groups often in response to a health-related event. Our findings demonstrate the ways in which the social contact associated with continued participation in VCOs is seen as helping with long-term condition management. Interventions designed at improving chronic illness management might usefully consider the role of VCOs. © 2014 John Wiley & Sons Ltd.

Anti-osteoarthritic effects of ChondroT in a rat model of collagenase-induced osteoarthritis.

PubMed

Jeong, Jiwon; Bae, Kiljoon; Kim, Sun-Gil; Kwak, Dongwook; Moon, Young-Joo; Choi, Chan-Hun; Kim, Young-Ran; Na, Chang-Su; Kim, Seon-Jong

2018-04-19

Previously, we reported that ChondorT showed significant anti-arthritis and anti-inflammatory effects. ChondroT, a new herbal medication, consists of the water extracts of Osterici Radix, Lonicerae Folium, Angelicae Gigantis Radix, Clematidis Radix, and Phellodendri Cortex (6:4:4:4:3). The objective of this study was to investigate the effects of ChondroT in collagenase-induced osteoarthritis rat model. Osteoarthritis was induced by the injection of collagenase into the right knee joint cavity of rats. The samples were divided into seven groups [intact (n = 6), control (n = 6), indomethacin (n = 6), Joins tab (n = 6), ChondroT50 (n = 6), ChondroT100 (n = 6), and ChondroT200 (n = 6)]. The control group was administered normal saline, indomethacin group was administered indomethacin (2 mg/kg), and Joins tab group was administered Joins Tab (20 mg/kg). The ChondroT50, ChondroT100, and ChondroT200 groups were administered 50, 100, and 200 mg/kg of ChondroT, respectively. All oral administrations were initiated 7 days after the induction of arthritis and were continued for a total of 12 days. At the end of the experiment, serum aminotransferase, albumin, blood urea nitrogen, creatinine, leukocyte, and inflammatory cytokines [tumor necrosis factor (TNF)-α, interleukin (IL)-1β, and IL-6] were analyzed. Hematoxylin and eosin (H&E) and safranin O-fast green staining of the articular structures of the knee joint were performed. TNF-α and IL-1β decreased in the ChondroT100 and ChondroT200 groups compared with those in the control group. IL-6 and aspartate aminotransferase decreased in the ChondroT50, ChondroT100, and ChondroT200 groups compared with that in the control group. Albumin, WBC and lymphocytes decreased in the ChondroT100 and ChondroT200 groups compared with those in the control group. In H&E stain, synoviocytes, cartilage lacunae, and chondrocytes were well preserved in the ChondroT100 and ChondroT200 groups, and safranin O-fast staining showed a clear reaction of proteoglycans in the ChondroT100 and ChondroT200 groups. Based on these results, it can be proposed that ChondroT has anti-osteoarthritic effects on collagenase-induced rat model.

Glu-Ureido-Based Inhibitors of Prostate-Specific Membrane Antigen: Lessons Learned During the Development of a Novel Class of Low-Molecular-Weight Theranostic Radiotracers.

PubMed

Kopka, Klaus; Benešová, Martina; Bařinka, Cyril; Haberkorn, Uwe; Babich, John

2017-09-01

In recent years, several radioligands targeting prostate-specific membrane antigen (PSMA) have been clinically introduced as a new class of theranostic radiopharmaceuticals for the treatment of prostate cancer (PC). In the second decade of the 21 st century, a new era in nuclear medicine was initiated by the clinical introduction of small-molecule PSMA inhibitor radioligands, 40 y after the clinical introduction of 18 F-FDG. Because of the high incidence and mortality of PC, the new PSMA radioligands have already had a remarkable impact on the clinical management of PC. For the continuing clinical development and long-term success of theranostic agents, designing modern prospective clinical trials in theranostic nuclear medicine is essential. First-in-human studies with PSMA radioligands derived from small-molecule PSMA inhibitors showed highly sensitive imaging of PSMA-positive PC by means of PET and SPECT as well as a dramatic response of metastatic castration-resistant PC after PSMA radioligand therapy. This tremendous success logically led to the initiation of prospective clinical trials with several PSMA radioligands. Meanwhile, MIP-1404, PSMA-11, 2-(3-{1-carboxy-5-[(6-fluoro-pyridine-3-carbonyl)-amino]-pentyl}-ureido)-pentanedioic acid (DCFPyL), PSMA-617, PSMA-1007, and others have entered or will enter prospective clinical trials soon in several countries. The significance becomes apparent by, for example, the considerable increase in the number of publications about PSMA-targeted PET imaging from 2013 to 2016 (e.g., a search of the Web of Science for "PSMA" AND "PET" found only 19 publications in 2013 but 218 in 2016). Closer examination of the initial success of PC treatment with PSMA inhibitor radiotracers leads to several questions from the basic research perspective as well as from the perspective of clinical demands: What lessons have been learned regarding the design of PSMA radioligands that have already been developed? Has an acceptable compromise between optimal PSMA radioligand design and a broad range of clinical demands been reached? Can the lessons learned from multiple successes within the PSMA experience be transferred to further theranostic approaches? © 2017 by the Society of Nuclear Medicine and Molecular Imaging.

Biochemical evidence for Ku-independent backup pathways of NHEJ.

PubMed

Wang, Huichen; Perrault, Ange Ronel; Takeda, Yoshihiko; Qin, Wei; Wang, Hongyan; Iliakis, George

2003-09-15

Cells of higher eukaryotes process within minutes double strand breaks (DSBs) in their genome using a non-homologous end joining (NHEJ) apparatus that engages DNA-PKcs, Ku, DNA ligase IV, XRCC4 and other as of yet unidentified factors. Although chemical inhibition, or mutation, in any of these factors delays processing, cells ultimately remove the majority of DNA DSBs using an alternative pathway operating with an order of magnitude slower kinetics. This alternative pathway is active in mutants deficient in genes of the RAD52 epistasis group and frequently joins incorrect ends. We proposed, therefore, that it reflects an alternative form of NHEJ that operates as a backup (B-NHEJ) to the DNA-PK-dependent (D-NHEJ) pathway, rather than homology directed repair of DSBs. The present study investigates the role of Ku in the coordination of these pathways using as a model end joining of restriction endonuclease linearized plasmid DNA in whole cell extracts. Efficient, error-free, end joining observed in such in vitro reactions is strongly inhibited by anti-Ku antibodies. The inhibition requires DNA-PKcs, despite the fact that Ku efficiently binds DNA ends in the presence of antibodies, or in the absence of DNA-PKcs. Strong inhibition of DNA end joining is also mediated by wortmannin, an inhibitor of DNA-PKcs, in the presence but not in the absence of Ku, and this inhibition can be rescued by pre-incubating the reaction with double stranded oligonucleotides. The results are compatible with a role of Ku in directing end joining to a DNA-PK dependent pathway, mediated by efficient end binding and productive interactions with DNA-PKcs. On the other hand, efficient end joining is observed in extracts of cells lacking DNA-PKcs, as well as in Ku-depleted extracts in line with the operation of alternative pathways. Extracts depleted of Ku and DNA-PKcs rejoin blunt ends, as well as homologous ends with 3' or 5' protruding single strands with similar efficiency, but addition of Ku suppresses joining of blunt ends and homologous ends with 3' overhangs. We propose that the affinity of Ku for DNA ends, particularly when cooperating with DNA-PKcs, suppresses B-NHEJ by quickly and efficiently binding DNA ends and directing them to D-NHEJ for rapid joining. A chromatin-based model of DNA DSB rejoining accommodating biochemical and genetic results is presented and deviations between in vitro and in vivo results discussed.

Biochemical evidence for Ku-independent backup pathways of NHEJ

PubMed Central

Wang, Huichen; Perrault, Ange Ronel; Takeda, Yoshihiko; Qin, Wei; Wang, Hongyan; Iliakis, George

2003-01-01

Cells of higher eukaryotes process within minutes double strand breaks (DSBs) in their genome using a non-homologous end joining (NHEJ) apparatus that engages DNA-PKcs, Ku, DNA ligase IV, XRCC4 and other as of yet unidentified factors. Although chemical inhibition, or mutation, in any of these factors delays processing, cells ultimately remove the majority of DNA DSBs using an alternative pathway operating with an order of magnitude slower kinetics. This alternative pathway is active in mutants deficient in genes of the RAD52 epistasis group and frequently joins incorrect ends. We proposed, therefore, that it reflects an alternative form of NHEJ that operates as a backup (B-NHEJ) to the DNA-PK-dependent (D-NHEJ) pathway, rather than homology directed repair of DSBs. The present study investigates the role of Ku in the coordination of these pathways using as a model end joining of restriction endonuclease linearized plasmid DNA in whole cell extracts. Efficient, error-free, end joining observed in such in vitro reactions is strongly inhibited by anti-Ku antibodies. The inhibition requires DNA-PKcs, despite the fact that Ku efficiently binds DNA ends in the presence of antibodies, or in the absence of DNA-PKcs. Strong inhibition of DNA end joining is also mediated by wortmannin, an inhibitor of DNA-PKcs, in the presence but not in the absence of Ku, and this inhibition can be rescued by pre-incubating the reaction with double stranded oligonucleotides. The results are compatible with a role of Ku in directing end joining to a DNA-PK dependent pathway, mediated by efficient end binding and productive interactions with DNA-PKcs. On the other hand, efficient end joining is observed in extracts of cells lacking DNA-PKcs, as well as in Ku-depleted extracts in line with the operation of alternative pathways. Extracts depleted of Ku and DNA-PKcs rejoin blunt ends, as well as homologous ends with 3′ or 5′ protruding single strands with similar efficiency, but addition of Ku suppresses joining of blunt ends and homologous ends with 3′ overhangs. We propose that the affinity of Ku for DNA ends, particularly when cooperating with DNA-PKcs, suppresses B-NHEJ by quickly and efficiently binding DNA ends and directing them to D-NHEJ for rapid joining. A chromatin-based model of DNA DSB rejoining accommodating biochemical and genetic results is presented and deviations between in vitro and in vivo results discussed. PMID:12954774

Evaluation of Electronic Writing Experiences of Turkish Teacher Candidates at WATTPAD Environment

ERIC Educational Resources Information Center

Aytan, Talat

2017-01-01

The purpose of this study is to analyze Turkish teacher candidates' electronic writing experiences at wattpad.com environment. The study group of this research consisted of 53 Turkish teacher candidates who were studying at a state university in Istanbul. Teacher candidates in the study group joined Wattpad.com and wrote at least one narrative…

SETI group let by Barney Oliver, John Wolfe and John Billingham (in middle standing) lead a 1976

NASA Technical Reports Server (NTRS)

1976-01-01

SETI group let by Barney Oliver, John Wolfe and John Billingham (in middle standing) lead a 1976 discussion on the best strategies in the Search for Extraterrestrial Intelligence. Joining the discussion are L-R; Charles Seeger, Dario Black, Mary Connors, (Oliver, Wolfe, Billingham) and Larry Lesyna, (seated) Mark Stull.

Join a Club! Or a Team--Both Can Make Good Citizens

ERIC Educational Resources Information Center

Levine, Peter

2016-01-01

Sports participation in high school has positive effects on students' later civic engagement. But that is true of nearly all forms of extracurricular participation in high school--whether a group is explicitly civic (student government or a service club) or far removed from civic life (an academic club or a music group). Indeed, the civic…

Co-Creation of Value in Higher Education: Using Social Network Marketing in the Recruitment of Students

ERIC Educational Resources Information Center

Fagerstrom, Asle; Ghinea, Gheorghita

2013-01-01

A social network recruitment campaign was prepared where applicants for information technology bachelor studies at a Norwegian university college were invited to join a Facebook group related to the subject of interest. Each Facebook group was assigned a contact person who received training to facilitate activities and in answering questions from…

Coming of Age for the 21st Century.

ERIC Educational Resources Information Center

Hill, Paul, Jr.

Literature that speculates about the future omits African-Americans. Racism and unemployment have caused this group to swell the ranks of the underclass. Thus, as a group, blacks have been written off as obsolete and useless. Most at risk for joining the underclass is the black male. Because of the way Western males are socialized to be strong and…

78 FR 37222 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

... Livingston, Tennessee; to join the currently approved control, group of The Jack Windle Irrevocable Life... Livingston, Tennessee. Collectively, the new control group controls 100 percent of the outstanding stock of... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank...

Impact of the Siena College Tech Valley Scholars Program on Student Outcomes

ERIC Educational Resources Information Center

Medsker, Larry; Allard, Lee; Tucker, Lucas J.; O'Donnell, Jodi L.; Sterne-Marr, Rachel; Bannon, Jon; Finn, Rose; Weatherwax, Allan

2016-01-01

The Tech Valley Scholars (TVS) program included 38 students who joined this program over the course of three academic years, from 2009 to 2012. These students comprise the experimental group for this study to determine if participating in the NSF-funded Tech Valley Scholars program improved academic outcomes. The experimental group was compared to…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Todd R.; Bettaieb, Ahmed; Kodani, Sean

Liver fibrosis is a pathological condition in which chronic inflammation and changes to the extracellular matrix lead to alterations in hepatic tissue architecture and functional degradation of the liver. Inhibitors of the enzyme soluble epoxide hydrolase (sEH) reduce fibrosis in the heart, pancreas and kidney in several disease models. In this study, we assess the effect of sEH inhibition on the development of fibrosis in a carbon tetrachloride (CCl{sub 4})-induced mouse model by monitoring changes in the inflammatory response, matrix remolding and endoplasmic reticulum stress. The sEH inhibitor 1-trifluoromethoxyphenyl-3-(1-propionylpiperidin-4-yl) urea (TPPU) was administered in drinking water. Collagen deposition in themore » liver was increased five-fold in the CCl{sub 4}-treated group, and this was returned to control levels by TPPU treatment. Hepatic expression of Col1a2 and 3a1 mRNA was increased over fifteen-fold in the CCl{sub 4}-treated group relative to the Control group, and this increase was reduced by 50% by TPPU treatment. Endoplasmic reticulum (ER) stress observed in the livers of CCl{sub 4}-treated animals was attenuated by TPPU treatment. In order to support the hypothesis that TPPU is acting to reduce the hepatic fibrosis and ER stress through its action as a sEH inhibitor we used a second sEH inhibitor, trans-4-(4-[3-(4-trifluoromethoxy-phenyl)-ureido]-cyclohexyloxy)-benzoic acid (t-TUCB), and sEH null mice. Taken together, these data indicate that the sEH may play an important role in the development of hepatic fibrosis induced by CCl{sub 4}, presumably by reducing endogenous fatty acid epoxide chemical mediators acting to reduce ER stress. - Highlights: • We administer an inhibitor of sEH in a CCl4 murine model. • sEH inhibition reduces liver collagen deposition and pro-fibrotic gene expression. • sEH inhibition induces MMP-1a activity.« less

Developing for the future: hometown USA.

DOT National Transportation Integrated Search

2000-09-01

In a trend that continues to build, citizens : across the country are joining forces locally to : address environmental issues that affect their : health, natural resources, and the quality of : life in their communities. Groups of people are : takin...

Fermilab Prairie Plant Survey

Science.gov Websites

beautiful prairie. Join a unique science program open to the public, adult groups, families, scouts and more ready to hike and explore parts of our prairie that are not normally open to the public. There is no

Paroxysmal Dyskinesias

MedlinePlus

... Your Doctor Find a Doctor Finding Support Emotional & Mental Health When a Child is Diagnosed - Resources for Families Frequently Asked Questions Faces of Dystonia Get Involved Donate Stay Connected Special Events Calendar Promote Awareness Join a Support Group Become a Legislative Advocate ...

Forms of Dystonia

MedlinePlus

... Your Doctor Find a Doctor Finding Support Emotional & Mental Health When a Child is Diagnosed - Resources for Families Frequently Asked Questions Faces of Dystonia Get Involved Donate Stay Connected Special Events Calendar Promote Awareness Join a Support Group Become a Legislative Advocate ...

Symptoms and Diagnosis

MedlinePlus

... Your Doctor Find a Doctor Finding Support Emotional & Mental Health When a Child is Diagnosed - Resources for Families Frequently Asked Questions Faces of Dystonia Get Involved Donate Stay Connected Special Events Calendar Promote Awareness Join a Support Group Become a Legislative Advocate ...

Musician's Dystonias

MedlinePlus

... Your Doctor Find a Doctor Finding Support Emotional & Mental Health When a Child is Diagnosed - Resources for Families Frequently Asked Questions Faces of Dystonia Get Involved Donate Stay Connected Special Events Calendar Promote Awareness Join a Support Group Become a Legislative Advocate ...

Edwin Lee | NREL

Science.gov Websites

Edwin Lee Photo of Edwin Lee Edwin Lee Researcher III-Mechanical Engineering Edwin.Lee@nrel.gov | 303-275-3110 Edwin Lee joined NREL in 2013 and works in the Commercial Buildings Research Group. He

Benefit of social media on patient engagement and satisfaction: Results of a 9-month, qualitative pilot study using Facebook.

PubMed

Dhar, Vikrom K; Kim, Young; Graff, Justin T; Jung, Andrew D; Garrett, Jennifer; Dick, Lauren E; Harris, Jenifer; Shah, Shimul A

2018-03-01

Despite the potential benefits of social media, health care providers are often hesitant to engage patients through these sites. Our aim was to explore how implementation of social media may affect patient engagement and satisfaction. In September 2016 a Facebook support group was created for liver transplant patients to use as a virtual community forum. Data including user demographics and group activity were reviewed. A survey was conducted evaluating users' perceptions regarding participation in the group. Over 9 months, 350 unique users (50% liver transplant patients, 36% caregivers/friends, 14% health care providers) contributed 339 posts, 2,338 comments, and 6,274 reactions to the group; 98% of posts were reacted to or commented on by other group members. Patients were the most active users compared with health care providers and caregivers. A total of 95% of survey respondents reported that joining the group had a positive impact on their care; and 97% reported that their main motivation for joining was to provide or receive support from other patients. This pilot study indicates that the integration of social media into clinical practice can empower surgeons to synthesize effectively a patient support community that augments patient engagement and satisfaction. Copyright © 2017 Elsevier Inc. All rights reserved.

Joining psychiatric care and faith healing in a prayer camp in Ghana: randomised trial.

PubMed

Ofori-Atta, A; Attafuah, J; Jack, H; Baning, F; Rosenheck, R

2018-01-01

Care of people with serious mental illness in prayer camps in low-income countries generates human rights concerns and ethical challenges for outcome researchers. Aims To ethically evaluate joining traditional faith healing with psychiatric care including medications (Clinical trials.gov identifier NCT02593734). Residents of a Ghana prayer camp were randomly assigned to receive either indicated medication for schizophrenia or mood disorders along with usual prayer camp activities (prayers, chain restraints and fasting) (n = 71); or the prayer camp activities alone (n = 68). Masked psychologists assessed Brief Psychiatric Rating Scale (BPRS) outcomes at 2, 4 and 6 weeks. Researchers discouraged use of chaining, but chaining decisions remained under the control of prayer camp staff. Total BPRS symptoms were significantly lower in the experimental group (P = 0.003, effect size -0.48). There was no significant difference in days in chains. Joining psychiatric and prayer camp care brought symptom benefits but, in the short-run, did not significantly reduce days spent in chains. Declaration of interest None.

Effects of Ving Tsun Chinese martial art training on musculoskeletal health, balance performance, and self-efficacy in community-dwelling older adults.

PubMed

Lip, Ryan W T; Fong, Shirley S M; Ng, Shamay S M; Liu, Karen P Y; Guo, X

2015-03-01

[Purpose] The aim of this study was to investigate the effects of Ving Tsun (VT) Chinese martial art training on radial bone strength, upper- and lower-limb muscular strength, shoulder joint mobility, balance performance, and self-efficacy in elderly participants. [Subjects and Methods] Twelve seniors voluntarily joined the VT training group, and twenty-seven seniors voluntarily joined the control group. The VT group received VT training for three months, while the control group received no training. The bone strength of the distal radius was assessed using an ultrasound bone sonometer. Muscular strength in the limbs was evaluated using a Jamar handgrip dynamometer and the five times sit-to-stand test. Shoulder joint mobility was examined using a goniometer. Balance performance and self-efficacy were evaluated using the Berg Balance Scale and the Chinese version of the Activities-specific Balance Confidence Scale, respectively. [Results] The results revealed a nonsignificant group-by-time interaction effect, group effect, and time effect for all outcome variables. However, general trends of maintenance or improvement in all outcome parameters were observed to a greater extent in the VT group than in the control group. [Conclusion] VT training might be a potential fall-prevention exercise that can be used to maintain general physique, balance, and confidence in the elderly population. A further randomized controlled trial is needed to confirm this postulation.

Effects of Ving Tsun Chinese martial art training on musculoskeletal health, balance performance, and self-efficacy in community-dwelling older adults

PubMed Central

Lip, Ryan W.T.; Fong, Shirley S.M.; Ng, Shamay S.M.; Liu, Karen P.Y.; Guo, X.

2015-01-01

[Purpose] The aim of this study was to investigate the effects of Ving Tsun (VT) Chinese martial art training on radial bone strength, upper- and lower-limb muscular strength, shoulder joint mobility, balance performance, and self-efficacy in elderly participants. [Subjects and Methods] Twelve seniors voluntarily joined the VT training group, and twenty-seven seniors voluntarily joined the control group. The VT group received VT training for three months, while the control group received no training. The bone strength of the distal radius was assessed using an ultrasound bone sonometer. Muscular strength in the limbs was evaluated using a Jamar handgrip dynamometer and the five times sit-to-stand test. Shoulder joint mobility was examined using a goniometer. Balance performance and self-efficacy were evaluated using the Berg Balance Scale and the Chinese version of the Activities-specific Balance Confidence Scale, respectively. [Results] The results revealed a nonsignificant group-by-time interaction effect, group effect, and time effect for all outcome variables. However, general trends of maintenance or improvement in all outcome parameters were observed to a greater extent in the VT group than in the control group. [Conclusion] VT training might be a potential fall-prevention exercise that can be used to maintain general physique, balance, and confidence in the elderly population. A further randomized controlled trial is needed to confirm this postulation. PMID:25931704

Malaria parasite carbonic anhydrase: inhibition of aromatic/heterocyclic sulfonamides and its therapeutic potential

PubMed Central

Krungkrai, Sudaratana R; Krungkrai, Jerapan

2011-01-01

Plasmodium falciparum (P. falciparum) is responsible for the majority of life-threatening cases of human malaria, causing 1.5-2.7 million annual deaths. The global emergence of drug-resistant malaria parasites necessitates identification and characterization of novel drug targets and their potential inhibitors. We identified the carbonic anhydrase (CA) genes in P. falciparum. The pfCA gene encodes anα-carbonic anhydrase, a Zn2+-metalloenzme, possessing catalytic properties distinct from that of the human host CA enzyme. The amino acid sequence of the pfCA enzyme is different from the analogous protozoan and human enzymes. A library of aromatic/heterocyclic sulfonamides possessing a large diversity of scaffolds were found to be very good inhibitors for the malarial enzyme at moderate-low micromolar and submicromolar inhibitions. The structure of the groups substituting the aromatic-ureido- or aromatic-azomethine fragment of the molecule and the length of the parent sulfonamide were critical parameters for the inhibitory properties of the sulfonamides. One derivative, that is, 4- (3, 4-dichlorophenylureido)thioureido-benzenesulfonamide (compound 10) was the most effective in vitro Plasmodium falciparum CA inhibitor, and was also the most effective antimalarial compound on the in vitro P. falciparum growth inhibition. The compound 10 was also effective in vivo antimalarial agent in mice infected with Plasmodium berghei, an animal model of drug testing for human malaria infection. It is therefore concluded that the sulphonamide inhibitors targeting the parasite CA may have potential for the development of novel therapies against human malaria. PMID:23569766

The importance of social media for patients and families affected by congenital anomalies: A Facebook cross-sectional analysis and user survey.

PubMed

Jacobs, Robyn; Boyd, Leanne; Brennan, Kirsty; Sinha, C K; Giuliani, Stefano

2016-11-01

We aimed to define characteristics and needs of Facebook users in relation to congenital anomalies. Cross-sectional analysis of Facebook related to four congenital anomalies: anorectal malformation (ARM), congenital diaphragmatic hernia (CDH), congenital heart disease (CHD) and hypospadias/epispadias (HS/ES). A keyword search was performed to identify relevant Groups/Pages. An anonymous survey was posted to obtain quantitative/qualitative data on users and their healthcare needs. 54 Groups and 24 Pages were identified (ARM: 10 Groups; CDH: 9 Groups, 7 Pages; CHD: 32 Groups, 17 Pages; HS/ES: 3 Groups), with 16,191 Group members and 48,766 Page likes. 868/1103 (79%) of respondents were parents. Male:female ratio was 1:10.9. 65% of the users were 26-40years old. Common reasons for joining these Groups/Pages included: seeking support, education, making friends, and providing support to others. 932/1103 (84%) would like healthcare professionals (HCPs) to actively participate in their Group. 31% of the respondents felt that they did not receive enough support from their healthcare system. 97% of the respondents would like to join a Group linked to their primary hospital. Facebook Groups/Pages related to congenital anomalies are highly populated and active. There is a need for HCPs and policy makers to better understand and participate in social media to support families and improve patient care. Copyright © 2016 Elsevier Inc. All rights reserved.

Individual killer whale vocal variation during intra-group behavioral dynamics

NASA Astrophysics Data System (ADS)

Grebner, Dawn M.

The scientific goal of this dissertation was to carefully study the signal structure of killer whale communications and vocal complexity and link them to behavioral circumstances. The overall objective of this research sought to provide insight into killer whale call content and usage which may be conveying information to conspecifics in order to maintain group cohesion. Data were collected in the summers of 2006 and 2007 in Johnstone Strait, British Columbia. For both individuals and small groups, vocalizations were isolated using a triangular hydrophone array and the behavioral movement patterns were captured by a theodolite and video camera positioned on a cliff overlooking the hyrophone locations. This dissertation is divided into four analysis chapters. In Chapter 3, discriminant analysis was used to validate the four N04 call subtypes which were originally parsed due to variations in slope segments. The first two functions of the discriminant analysis explained 97% of the variability. Most of the variability for the N04 call was found in the front convex and the terminal portions of the call, while very little variability was found in the center region of the call. This research revealed that individual killer whales produced multiple subtypes of the N04 call. No correlations of behaviors to acoustic parameters obtained were found. The aim of the Chapter 4 was to determine if killer whale calling behavior varied prior to and after the animals had joined. Pulsed call rates were found to be greater pre- compared to post-joining events. Two-way vocal exchanges were more common occurring 74% of the time during pre-joining events. In Chapter 5, initiated and first response to calls varied between age/sex class groups when mothers were separated from an offspring. Solo mothers and calves initiated pulsed calls more often than they responded. Most of the no vocal responses were due to mothers who were foraging. Finally, observations of the frequency split in N04 calls discussed in Chapter 6 showed that the higher frequency component (HFC) was always associated with sideband 7 (SB7) of the lower frequency component (LFC). Insight into Northern Resident killer whale intra-group vocal dynamics would aid our understanding of vocal behaviors of many other marine mammal species that rely on vocal exchanges for prey capture, group movement or survival. This is the first study to focus on killer whale vocal content and usage as it pertains to intra-group dynamics for (1) mother and offspring separations and (2) for all individuals prior to joining events, as well as (3) individual usage in a diverging pulsed call. It is also the first time the N04 call has been parsed into subtypes.

Acceptability of an open-label wait-listed trial design: Experiences from the PROUD PrEP study.

PubMed

Gafos, Mitzy; Brodnicki, Elizabeth; Desai, Monica; McCormack, Sheena; Nutland, Will; Wayal, Sonali; White, Ellen; Wood, Gemma; Barber, Tristan; Bell, Gill; Clarke, Amanda; Dolling, David; Dunn, David; Fox, Julie; Haddow, Lewis; Lacey, Charles; Nardone, Anthony; Quinn, Killian; Rae, Caroline; Reeves, Iain; Rayment, Michael; White, David; Apea, Vanessa; Ayap, Wilbert; Dewsnap, Claire; Collaco-Moraes, Yolanda; Schembri, Gabriel; Sowunmi, Yinka; Horne, Rob

2017-01-01

PROUD participants were randomly assigned to receive pre-exposure prophylaxis (PrEP) immediately or after a deferred period of one-year. We report on the acceptability of this open-label wait-listed trial design. Participants completed an acceptability questionnaire, which included categorical study acceptability data and free-text data on most and least liked aspects of the study. We also conducted in-depth interviews (IDI) with a purposely selected sub-sample of participants. Acceptability questionnaires were completed by 76% (415/544) of participants. After controlling for age, immediate-group participants were almost twice as likely as deferred-group participants to complete the questionnaire (AOR:1.86;95%CI:1.24,2.81). In quantitative data, the majority of participants in both groups found the wait-listed design acceptable when measured by satisfaction of joining the study, intention to remain in the study, and interest in joining a subsequent study. However, three-quarters thought that the chance of being in the deferred-group might put other volunteers off joining the study. In free-text responses, data collection tools were the most frequently reported least liked aspect of the study. A fifth of deferred participants reported 'being deferred' as the thing they least liked about the study. However, more deferred participants disliked the data collection tools than the fact that they had to wait a year to access PrEP. Participants in the IDIs had a good understanding of the rationale for the open-label wait-listed study design. Most accepted the design but acknowledged they were, or would have been, disappointed to be randomised to the deferred group. Five of the 25 participants interviewed reported some objection to the wait-listed design. The quantitative and qualitative findings suggest that in an environment where PrEP was not available, the rationale for the wait-listed trial design was well understood and generally acceptable to most participants in this study.

77 FR 21622 - Special Medical Advisory Group; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... Affiliations Council, ethics, an update on social services, and the White House initiative, ``Joining Forces... Administrative Operations (10B), VHA, 810 Vermont Avenue NW., Washington, DC 20420, or by email at j.t[email protected

Dystonia Medical Research Foundation

MedlinePlus

... Your Doctor Find a Doctor Finding Support Emotional & Mental Health When a Child is Diagnosed - Resources for Families Frequently Asked Questions Faces of Dystonia Get Involved Donate Stay Connected Special Events Calendar Promote Awareness Join a Support Group Become a Legislative Advocate ...

Subordinate females in the cooperatively breeding Seychelles warbler obtain direct benefits by joining unrelated groups.

PubMed

Groenewoud, Frank; Kingma, Sjouke A; Hammers, Martijn; Dugdale, Hannah L; Burke, Terry; Richardson, David S; Komdeur, Jan

2018-05-11

1.In many cooperatively breeding animals, a combination of ecological constraints and benefits of philopatry favours offspring taking a subordinate position on the natal territory instead of dispersing to breed independently. However, in many species individuals disperse to a subordinate position in a non-natal group ("subordinate between-group" dispersal), despite losing the kin-selected and nepotistic benefits of remaining in the natal group. It is unclear which social, genetic and ecological factors drive between-group dispersal. 2.We aim to elucidate the adaptive significance of subordinate between-group dispersal by examining which factors promote such dispersal, whether subordinates gain improved ecological and social conditions by joining a non-natal group, and whether between-group dispersal results in increased lifetime reproductive success and survival. 3.Using a long-term dataset on the cooperatively-breeding Seychelles warbler (Acrocephalus sechellensis), we investigated 4.how a suite of proximate factors (food availability, group composition, age and sex of focal individuals, population density) promote subordinate between-group dispersal by comparing such dispersers with subordinates that dispersed to a dominant position or became floaters. We then analysed whether subordinates that moved to a dominant or non-natal subordinate position, or became floaters, gained improved conditions relative to the natal territory, and compared fitness components between the three dispersal strategies. 5.We show that individuals that joined another group as non-natal subordinates were mainly female and that, similar to floating, between-group dispersal was associated with social and demographic factors that constrained dispersal to an independent breeding position. Between-group dispersal was not driven by improved ecological or social conditions in the new territory and did not result in higher survival. Instead, between-group dispersing females often became co-breeders, obtaining maternity in the new territory, and were likely to inherit the territory in the future, leading to higher lifetime reproductive success compared to females that floated. Males never reproduced as subordinates, which may be one explanation why subordinate between-group dispersal by males is rare. 6.Our results suggest that subordinate between-group dispersal is used by females to obtain reproductive benefits when options to disperse to an independent breeding position are limited. This provides important insight into the additional strategies that individuals can use to obtain reproductive benefits. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Building a Team of Passionate Callers to Enrich Education in Croatia

ERIC Educational Resources Information Center

Gojsic, Jasenka; Magzan, Masa

2010-01-01

This article is about a group of eight people joined by a common idea--a strong call to enrich education in Croatia so that it motivates leadership and empowers children. Through use of philosophy and methodology of Appreciative Inquiry, this informal group of people has gradually developed into the core team of a potential national movement.…

[Psychoeducation and multifamily groups for patients with first-episode psychosis].

PubMed

Lyse, Hanne-Grethe; Haahr, Ulrik Helt; Fjell, Anne; Dichmann, Bente; Flensborg, Estrid; Simonsen, Erik

2007-10-22

In spite of existing good evidence of the efficacy of extended intervention in families with a member diagnosed as schizophrenic, this intervention is not in general use in Denmark. This paper describes experiences of psychoeducation and multifamily group from the TIPS project (Early Intervention in Psychosis). 55 patients were enrolled in the Danish part of the project. The 2-year manualized treatment program consisted of pharmacotherapy, psychotherapy and family intervention. The family intervention included joining sessions, information days and multifamily group. Of the 55 enrolled 31 patients and their families had joining sessions; 20 completed the full treatment program. They were younger patients, more often living with their families, and differed diagnostically to some extent from the other patients. Lack of acceptance from the patients or families and too far to the treatment site were the main reasons for not participating. The study indicates the necessity to offer a more phase-specific family intervention to include more patients and their families. Due to the low incidence of first-episode psychosis it is necessary that treatment centres coordinate their treatment in order to facilitate the establishment of homogenous groups and to develop coordinated education and supervision.

An unreliable group arrival queue with k stages of service, retrial under variant vacation policy

NASA Astrophysics Data System (ADS)

Radha, J.; Indhira, K.; Chandrasekaran, V. M.

2017-11-01

In this research work we considered repairable retrial queue with group arrival and the server utilize the variant vacations. A server gives service in k stages. Any arriving group of units finds the server free, one from the group entering the first stage of service and the rest are joining into the orbit. After completion of the i th stage of service, the customer may have the option to choose (i+1)th stage of service with probability θi , with probability pi may join into orbit as feedback customer or may leave the system with probability {q}i=≤ft\\{\\begin{array}{l}1-{p}i-{θ }i,i=1,2,\\cdots k-1\\ 1-{p}i,i=k\\end{array}\\right\\}. If the orbit is empty at the service completion of each stage service, the server takes modified vacation until at least one customer appears in the orbit on the server returns from a vacation. Busy server may get to breakdown and the service channel will fail for a short interval of time. By using the supplementary variable method, steady state probability generating function for system size, some system performance measures are discussed.

Braze material for joining ceramic to metal and ceramic to ceramic surfaces and joined ceramic to metal and ceramic to ceramic article

DOEpatents

Hunt, T.K.; Novak, R.F.

1991-05-07

An improved active metal braze filler material is provided in which the coefficient of thermal expansion of the braze filler is more closely matched with that of the ceramic and metal, or two ceramics, to provide ceramic to metal, or ceramic to ceramic, sealed joints and articles which can withstand both high temperatures and repeated thermal cycling without failing. The braze filler material comprises a mixture of a material, preferably in the form of a powder, selected from the group consisting of molybdenum, tungsten, silicon carbide and mixtures thereof, and an active metal filler material selected from the group consisting of alloys or mixtures of nickel and titanium, alloys or mixtures of nickel and zirconium, alloys or mixtures of nickel, titanium, and copper, alloys or mixtures of nickel, titanium, and zirconium, alloys or mixtures of niobium and nickel, alloys or mixtures of niobium and zirconium, alloys or mixtures of niobium and titanium, alloys or mixtures of niobium, titanium, and nickel, alloys or mixtures of niobium, zirconium, and nickel, and alloys or mixtures of niobium, titanium, zirconium, and nickel. The powder component is selected such that its coefficient of thermal expansion will effect the overall coefficient of thermal expansion of the braze material so that it more closely matches the coefficients of thermal expansion of the ceramic and metal parts to be joined. 3 figures.

Braze material for joining ceramic to metal and ceramic to ceramic surfaces and joined ceramic to metal and ceramic to ceramic article

DOEpatents

Hunt, Thomas K.; Novak, Robert F.

1991-01-01

An improved active metal braze filler material is provided in which the coefficient of thermal expansion of the braze filler is more closely matched with that of the ceramic and metal, or two ceramics, to provide ceramic to metal, or ceramic to ceramic, sealed joints and articles which can withstand both high temperatures and repeated thermal cycling without failing. The braze filler material comprises a mixture of a material, preferably in the form of a powder, selected from the group consisting of molybdenum, tungsten, silicon carbide and mixtures thereof, and an active metal filler material selected from the group consisting of alloys or mixtures of nickel and titanium, alloys or mixtures of nickel and zirconium, alloys or mixtures of nickel, titanium, and copper, alloys or mixtures of nickel, titanium, and zirconium, alloys or mixtures of niobium and nickel, alloys or mixtures of niobium and zirconium, alloys or mixtures of niobium and titanium, alloys or mixtures of niobium, titanium, and nickel, alloys or mixtures of niobium, zirconium, and nickel, and alloys or mixtures of niobium, titanium, zirconium, and nickel. The powder component is selected such that its coefficient of thermal expansion will effect the overall coefficient of thermal expansion of the braze material so that it more closely matches the coefficients of thermal expansion of the ceramic and metal parts to be joined.

Bridge Busters: The 397th Bombardment Group (Medium) and the B-26 Marauder in World War II

DTIC Science & Technology

2015-06-01

up largely of new pilots from the training pipeline, these established groups transitioned from flying other aircraft. Unfortunately, four fatal...The 322 BG became the first of four initial B-26 groups to join the Eighth AF’s Third Bombardment Wing. With its first aircraft arriving in England...AF refused the suggestion. Marauders continued in the medium bombing role.101 In October 1943, the AAF transferred all four B-26 groups in

National health care reform and the 103rd Congress: the activities and influence of public health advocates.

PubMed Central

Schauffler, H; Wilkerson, J

1997-01-01

OBJECTIVES: This study examined the activities and influence of public health interest groups and coalitions on the national health care reform debates in the 103rd Congress. METHODS: Congressional staff and representatives of public health interest groups, coalitions, and government health agencies were interviewed. Content analysis of eight leading national health care reform bills was performed. RESULTS: The public health community coalesced around public health in health care reform; nearly all the major interest groups and government health agencies joined two or more public health or prevention coalitions, and half joined three or more. The most effective influence on health care reform legislation was early, sustained personal contact with Congress members and their staffs, accompanied by succinct written materials summarizing key points. Media campaigns and grassroots mobilization were less effective. Seven of the eight leading health care reform bills included one or more of the priorities supported by public health advocates. CONCLUSIONS: The public health community played an important role in increasing awareness and support for public health programs in the health care reform bills of the 103rd Congress. PMID:9240098

Facilitator and Participant Use of Facebook in a Community-Based Intervention for Parents: The InFANT Extend Program.

PubMed

Downing, Katherine L; Campbell, Karen J; van der Pligt, Paige; Hesketh, Kylie D

2017-12-01

Social networking sites such as Facebook afford new opportunities for behavior-change interventions. Although often used as a recruitment tool, few studies have reported the use of Facebook as an intervention component to facilitate communication between researchers and participants. The aim of this study was to examine facilitator and participant use of a Facebook component of a community-based intervention for parents. First-time parent groups participating in the intervention arm of the extended Infant Feeding, Activity and Nutrition Trial (InFANT Extend) Program were invited to join their own private Facebook group. Facilitators mediated the Facebook groups, using them to share resources with parents, arrange group sessions, and respond to parent queries. Parents completed process evaluation questionnaires reporting on the usefulness of the Facebook groups. A total of 150 parents (from 27 first-time parent groups) joined their private Facebook group. There were a mean of 36.9 (standard deviation 11.1) posts/group, with the majority being facilitator posts. Facilitator administration posts (e.g., arranging upcoming group sessions) had the highest average comments (4.0), followed by participant health/behavior questions (3.5). The majority of participants reported that they enjoyed being a part of their Facebook group; however, the frequency of logging on to their groups' page declined over the 36 months of the trial, as did their perceived usefulness of the group. Facebook appears to be a useful administrative tool in this context. Parents enjoyed being part of their Facebook group, but their reported use of and engagement with Facebook declined over time.

No Duck Left behind

ERIC Educational Resources Information Center

Cooper, Sandi; Thomas, Julie; Motley, Tammy

2011-01-01

Recently, a group of fourth graders joined "Pintail Partners"--a year-long collaborative research effort of scientists, students, classroom teachers, preservice teachers, museum educators, and university professors. Students and teachers followed satellite tracking data (marking the pintail duck's spring migration) and interacted with scientists…

DOE Office of Scientific and Technical Information (OSTI.GOV)

David, S.A.; Goodwin, G.M.; Gardner, K.

This document contains a listing of the written scientific information originating in the Materials Joining (formerly the Welding and Brazing Group), Metals and Ceramics Division, Oak Ridge National Laboratory during 1951 through June 1991. This registry of documents is as much as possible, in the order of issue date.

Investigation of the conditions affecting the joining of Hungarian hospitals to an accreditation programme: a cross-sectional study

PubMed Central

Margitai, Barnabás; Dózsa, Csaba; Bárdos-Csenteri, Orsolya Karola; Sándor, János; Gáll, Tibor; Gődény, Sándor

2018-01-01

Objective Quantitative studies have shown the various benefits for having accreditation in hospitals. However, neither of these explored the general conditions before applying for an accreditation. To close this gap, this study aimed to investigate the possible association between joining an accreditation programme with various hospital characteristics. Design A cross-sectional study was implemented using the databases of the 2013 Hungarian hospital survey and of the Hungarian State Treasury. Setting Public general hospitals in Hungary. Participants The analysis involved 44 public general hospitals, 14 of which joined the preparatory project for a newly developed accreditation programme. Main outcome measures The outcomes included the percentage of compliance in quality management, patient information and identification, internal professional regulation, safe surgery, pressure sore prevention, infection control, the opinions of the heads of quality management regarding the usefulness of quality management and clinical audits, and finally, the total debt of the hospital per bed and per discharged patient. Results According to our findings, the general hospitals joining the preparatory project of the accreditation programme performed better in four of the six investigated activities, the head of quality management had a better opinion on the usefulness of quality management, and both the debt per bed number and the debt per discharged patient were lower than those who did not join. However, no statistically significant differences between the two groups were found in any of the examined outcomes. Conclusions The findings suggest that hospitals applying for an accreditation programme do not differ significantly in characteristics from those which did not apply. This means that if in the future the accredited hospitals become better than other hospitals, then the improvement could be solely contributed to the accreditation. PMID:29391381

What Energy Deregulation Means for Your District.

ERIC Educational Resources Information Center

Costello, Richard J.

1999-01-01

Provides advice on how school districts might reduce energy costs in an era of electric industry deregulation. The competitive environment is described along with suggestions about joining purchasing groups to achieve pricing discounts. Final comments reveal the importance of energy contract negotiation. (GR)

Mali’s Next Battle: Improving Counterterrorism Capabilities

DTIC Science & Technology

2017-01-01

most notably nonnoble and non –Kel Adagh clans—and Arab communities joined the fight, with the Arabs form- ing their own rebel group . On April 11...between pro-government and CMA forces Area controlled by jihadist groups in 2012–2013 TOGO COTE D’IVOIRE GHANA SIERRA LEONE BENIN NIGERIA...northern Mali’s larger security issues, both because of ties between and among terrorist and non -jihadi rebel groups —the signatories of the Algiers

Comparison between smartphone pedometer applications and traditional pedometers for improving physical activity and body mass index in community-dwelling older adults

PubMed Central

Fong, Shirley S.M.; Ng, Shamay S.M.; Cheng, Yoyo T.Y.; Zhang, Joni; Chung, Louisa M.Y.; Chow, Gary C.C.; Chak, Yvonne T.C.; Chan, Ivy K.Y.; Macfarlane, Duncan J.

2016-01-01

[Purpose] The effectiveness of a smartphone pedometer application was compared with that of a traditional pedometer for improving the physical activity and weight status of community-dwelling older adults. [Subjects and Methods] This study had a nonequivalent pretest-posttest control group design. Ninety-seven older adults (mean age ± SD, 60.1 ± 5.5 years) joined the smartphone pedometer group and underwent a 2-week walking intervention based on a smartphone pedometer application. Fifty-four older adults (mean age ± SD, 65.3 ± 8.7 years) joined the traditional pedometer group and underwent a 2-week walking intervention based on a traditional pedometer. The participants’ physical activity was evaluated using the International Physical Activity Questionnaire–Short Form, and their weight status was quantified by calculating the body mass index. The daily pedometer count was also documented. [Results] No significant time, group, or time-by-group interaction effects were found for any of the outcome variables. However, trends of improvement in physical activity and body mass index were seen only in the smartphone pedometer group. [Conclusion] A smartphone pedometer application might be more favorable than a traditional pedometer in improving physical activity and body mass index in community-dwelling older adults. However, further experimental studies are necessary to confirm the results. PMID:27313391

Comparison between smartphone pedometer applications and traditional pedometers for improving physical activity and body mass index in community-dwelling older adults.

PubMed

Fong, Shirley S M; Ng, Shamay S M; Cheng, Yoyo T Y; Zhang, Joni; Chung, Louisa M Y; Chow, Gary C C; Chak, Yvonne T C; Chan, Ivy K Y; Macfarlane, Duncan J

2016-05-01

[Purpose] The effectiveness of a smartphone pedometer application was compared with that of a traditional pedometer for improving the physical activity and weight status of community-dwelling older adults. [Subjects and Methods] This study had a nonequivalent pretest-posttest control group design. Ninety-seven older adults (mean age ± SD, 60.1 ± 5.5 years) joined the smartphone pedometer group and underwent a 2-week walking intervention based on a smartphone pedometer application. Fifty-four older adults (mean age ± SD, 65.3 ± 8.7 years) joined the traditional pedometer group and underwent a 2-week walking intervention based on a traditional pedometer. The participants' physical activity was evaluated using the International Physical Activity Questionnaire-Short Form, and their weight status was quantified by calculating the body mass index. The daily pedometer count was also documented. [Results] No significant time, group, or time-by-group interaction effects were found for any of the outcome variables. However, trends of improvement in physical activity and body mass index were seen only in the smartphone pedometer group. [Conclusion] A smartphone pedometer application might be more favorable than a traditional pedometer in improving physical activity and body mass index in community-dwelling older adults. However, further experimental studies are necessary to confirm the results.

Practice patterns and job satisfaction in fellowship-trained endocrine surgeons.

PubMed

Tsinberg, Michael; Duh, Quan-Yang; Cisco, Robin M; Gosnell, Jessica E; Scholten, Anouk; Clark, Orlo H; Shen, Wen T

2012-12-01

Debates about the difficult job market for young endocrine surgeons are ongoing. This study aimed to analyze the practice patterns and work-related satisfaction levels of recently trained endocrine surgeons. An anonymous survey was utilized. Participants were divided into 3 groups: "Young" (<3 years in practice), "middle" (3-5 years), and "older" (>5 years). Fifty-six of 78 surgeons (72%) responded to the survey. Time in practice ranged from 1 to 9 years (mean, 3.9 ± 0.28). Forty-five (80%) described their practice as academic. Participants performed 244.1 ± 17.8 operations within the last year; 75.4 ± 3.3% were endocrine cases. More surgeons in the "young" group have academic practices (92%) and joined established endocrine surgery groups (54%) versus older surgeons (67% and 42%; P = .05). Of surgeons in the "young" group, 4% started their own practice versus 33% in the "older" group (P = .04). Level of satisfaction with financial compensation (3.2 on a 4-point scale versus 2.9) and lifestyle (3.6 vs 3.1) was also higher in the younger group (P = .009). Despite widespread speculation about scarcity of academic jobs after fellowship, recently trained endocrine surgeons are more likely to practice in academic settings and join established endocrine surgery practices when compared with older surgeons. Overall satisfaction level is higher among recently trained surgeons. Copyright © 2012 Mosby, Inc. All rights reserved.

Improving recruitment to pharmacological trials for illicit opioid use: findings from a qualitative focus group study

PubMed Central

Tompkins, Charlotte N. E.; McDonald, Rebecca; Strang, John

2018-01-01

Abstract Aim To explore potential study participants’ views on willingness to join clinical trials of pharmacological interventions for illicit opioid use to inform and improve future recruitment strategies. Design Qualitative focus group study [six groups: oral methadone (two groups); buprenorphine tablets (two groups); injectable opioid agonist treatment (one group); and former opioid agonist treatment (one group)]. Settings Drug and alcohol services and a peer support recovery service (London, UK). Participants Forty people with experience of opioid agonist treatment for heroin dependence (26 males, 14 females; aged 33–66 years). Measurements Data collection was facilitated by a topic guide that explored willingness to enrol in clinical pharmacological trials. Groups were audio‐recorded and transcribed. Transcribed data were analysed inductively via Iterative Categorization. Findings Participants’ willingness to join pharmacological trials of medications for opioid dependence was affected by factors relating to study burden, study drug, study design, study population and study relationships. Participants worried that the trial drug might be worse than, or interfere with, their current treatment. They also misunderstood aspects of trial design despite the researchers’ explanations. Conclusions Recruitment of participants for clinical trials of pharmacological interventions for illicit opioid use could be improved if researchers became better at explaining clinical trials to potential participants, dispelling misconceptions about trials and increasing trust in the research process and research establishment. A checklist of issues to consider when designing pharmacological trials for illicit opioid use is proposed. PMID:29356208

Defeating Terrorist Groups

DTIC Science & Technology

2008-09-18

al-Zouba’ tribe, was assassinated , an act attributed to his organization’s refusal to join the Islamic State of Iraq. AQI’s use of murder and...and assassinated . AQI’s growing dominance of organized crime cut into the revenues that competing groups counted on. Furthermore, whereas all the...Washington, DC: U.S. Department of Justice, 2007); New York Police Department, Threat Analysis: JFK Airport / Pipeline Plot (New York: New York Police

26 CFR 1.1502-15 - SRLY limitation on built-in losses.

Code of Federal Regulations, 2010 CFR

2010-04-01

... built-in loss under section 382(h)(3) on becoming a member of the P group. (iii) Under section 382(h)(3... loss under section 382(h)(3) is determined as if the day T joined the P group were a change date... unrealized built-in loss of the P/P1 subgroup exceeds the threshold requirement under section 382(h)(3)(B), M...

In-network processing of joins in wireless sensor networks.

PubMed

Kang, Hyunchul

2013-03-11

The join or correlated filtering of sensor readings is one of the fundamental query operations in wireless sensor networks (WSNs). Although the join in centralized or distributed databases is a well-researched problem, join processing in WSNs has quite different characteristics and is much more difficult to perform due to the lack of statistics on sensor readings and the resource constraints of sensor nodes. Since data transmission is orders of magnitude more costly than processing at a sensor node, in-network processing of joins is essential. In this paper, the state-of-the-art techniques for join implementation in WSNs are surveyed. The requirements and challenges, join types, and components of join implementation are described. The open issues for further research are identified.

In-Network Processing of Joins in Wireless Sensor Networks

PubMed Central

Kang, Hyunchul

2013-01-01

The join or correlated filtering of sensor readings is one of the fundamental query operations in wireless sensor networks (WSNs). Although the join in centralized or distributed databases is a well-researched problem, join processing in WSNs has quite different characteristics and is much more difficult to perform due to the lack of statistics on sensor readings and the resource constraints of sensor nodes. Since data transmission is orders of magnitude more costly than processing at a sensor node, in-network processing of joins is essential. In this paper, the state-of-the-art techniques for join implementation in WSNs are surveyed. The requirements and challenges, join types, and components of join implementation are described. The open issues for further research are identified. PMID:23478603

Molecular cloning and expression of the hyu genes from Microbacterium liquefaciens AJ 3912, responsible for the conversion of 5-substituted hydantoins to alpha-amino acids, in Escherichia coli.

PubMed

Suzuki, Shun'ichi; Takenaka, Yasuhiro; Onishi, Norimasa; Yokozeki, Kenzo

2005-08-01

A DNA fragment from Microbacterium liquefaciens AJ 3912, containing the genes responsible for the conversion of 5-substituted-hydantoins to alpha-amino acids, was cloned in Escherichia coli and sequenced. Seven open reading frames (hyuP, hyuA, hyuH, hyuC, ORF1, ORF2, and ORF3) were identified on the 7.5 kb fragment. The deduced amino acid sequence encoded by the hyuA gene included the N-terminal amino acid sequence of the hydantoin racemase from M. liquefaciens AJ 3912. The hyuA, hyuH, and hyuC genes were heterologously expressed in E. coli; their presence corresponded with the detection of hydantoin racemase, hydantoinase, and N-carbamoyl alpha-amino acid amido hydrolase enzymatic activities respectively. The deduced amino acid sequences of hyuP were similar to those of the allantoin (5-ureido-hydantoin) permease from Saccharomyces cerevisiae, suggesting that hyuP protein might function as a hydantoin transporter.

Antiamnesic properties of analogs and mimetics of the tripeptide human urocortin 3.

PubMed

Telegdy, Gyula; Kovács, Anita Kármen; Rákosi, Kinga; Zarándi, Márta; Tóth, Gábor K

2016-09-01

Amnesia is a deficit in memory caused by brain damage, disease, or trauma. Until now, there are no successful medications on the drug market available to treat amnesia. Short analogs and mimetics of human urocortin 3 (Ucn 3) tripeptide were synthetized and tested for their action against amnesia induced by eletroconvulsion in mice. Among the 16 investigated derivatives of Ucn 3 tripeptide, eight compounds displayed antiamnesic effect. Our results proved that the configuration of chiral center of glutamine does not affect the antiamnesic properties. Alkyl amide or isoleucyl amide at the C-terminus may lead to antiamnesic compounds. As concerned the N-terminus, acetyl, Boc, and alkyl ureido moieties were found among the active analogs, but the free amino function at the N-terminus usually led to an inactive derivatives. These observations may lead to the design and synthesis of small peptidomimetics and amino acid derivatives as antiamnesic drug candidates, although the elucidation of the mechanism of the action requires further investigations.

DUPA conjugation of a cytotoxic indenoisoquinoline topoisomerase I inhibitor for selective prostate cancer cell targeting.

PubMed

Roy, Jyoti; Nguyen, Trung Xuan; Kanduluru, Ananda Kumar; Venkatesh, Chelvam; Lv, Wei; Reddy, P V Narasimha; Low, Philip S; Cushman, Mark

2015-04-09

Prostate-specific membrane antigen (PSMA) is overexpressed in most prostate cancer cells while being present at low or undetectable levels in normal cells. This difference provides an opportunity to selectively deliver cytotoxic drugs to prostate cancer cells while sparing normal cells that lack PSMA, thus improving potencies and reducing toxicities. PSMA has high affinity for 2-[3-(1,3-dicarboxypropyl)ureido]pentanedioic acid (DUPA) (Ki = 8 nM). After binding to a DUPA-drug conjugate, PSMA internalizes, unloads the conjugate, and returns to the surface. In the present studies, an indenoisoquinoline topoisomerase I inhibitor was conjugated to DUPA via a peptide linker and a drug-release segment that facilitates intracellular cleavage to liberate the drug cargo. The DUPA-indenoisoquinoline conjugate exhibited an IC50 in the low nanomolar range in 22RV1 cell cultures and induced a complete cessation of tumor growth with no toxicity, as determined by loss of body weight and death of treated mice.

Ligand-targeted delivery of small interfering RNAs to malignant cells and tissues.

PubMed

Thomas, Mini; Kularatne, Sumith A; Qi, Longwu; Kleindl, Paul; Leamon, Christopher P; Hansen, Michael J; Low, Philip S

2009-09-01

Potential clinical applications of small interfering RNA (siRNA) are hampered primarily by delivery issues. We have successfully addressed the delivery problems associated with off-site targeting of highly toxic chemotherapeutic agents by attaching the drugs to tumor-specific ligands that will carry the attached cargo into the desired cancer cell. Indeed, several such tumor-targeted drugs are currently undergoing human clinical trials. We now show that efficient targeting of siRNA to malignant cells and tissues can be achieved by covalent conjugation of small-molecular-weight, high-affinity ligands, such as folic acid and DUPA (2-[3-(1, 3-dicarboxy propyl)-ureido] pentanedioic acid), to siRNA. The former ligand binds a folate receptor that is overexpressed on a variety of cancers, whereas the latter ligand binds to prostate-specific membrane antigen that is overexpressed specifically on prostate cancers and the neovasculature of all solid tumors. Using these ligands, we show remarkable receptor-mediated targeting of siRNA to cancer tissues in vitro and in vivo.

Synthesis and evaluation of anticonvulsant activities of some new arylhexahydropyrimidine-2,4-diones.

PubMed

Caliş, U; Köksal, M

2001-01-01

In this study, some new 3-alkyl-6-arylhexahydropyrimidine-2,4-dione derivatives were synthesized as anticonvulsant agents. 6-Arylhexahydropyrimidine-2,4-diones which were used as starting materials in the synthesis of the compounds were prepared in acidic media by the cyclization of potassium cyanate and the appropriate ureido acids that were gained by the reaction of beta-aminoacids, malonic acid and ammonium acetate. The structures of the synthesized compounds were confirmed by UV, IR, 1H-NMR and elementary analysis. Their anticonvulsant activities were determined by maximal electroshock (MES), subcutaneous metrazol (scMet) and rotorod toxicity tests for neurological deficits. According to the activity studies, 3-arylalkyl-6-(p-chlorophenyl) derivatives were found to be protective against scMet, whereas 6-phenyl derivatives were not. 6-Phenyl-3-(2-morpholinoethyl)hexahydropyrimidine-2,4-dione was the only compound determined to be active against MES at 300 mg/kg dose at half an hour.

Discovery of Tetralones as Potent and Selective Inhibitors of Acyl-CoA:Diacylglycerol Acyltransferase 1.

PubMed

Cheung, Mui; Tangirala, Raghuram S; Bethi, Sridhar R; Joshi, Hemant V; Ariazi, Jennifer L; Tirunagaru, Vijaya G; Kumar, Sanjay

2018-02-08

Acyl-CoA:diacylglycerol acyltransferase 1 (DGAT1) plays an important role in triglyceride synthesis and is a target of interest for the treatment of metabolic disorders. Herein we describe the structure-activity relationship of a novel tetralone series of DGAT1 inhibitors and our strategies for overcoming genotoxic liability of the anilines embedded in the chemical structures, leading to the discovery of a candidate compound, ( S )-2-(6-(5-(3-(3,4-difluorophenyl)ureido)pyrazin-2-yl)-1-oxo-2-(2,2,2-trifluoroethyl)-1,2,3,4-tetrahydronaphthalen-2-yl)acetic acid (GSK2973980A, 26d ). Compound 26d is a potent and selective DGAT1 inhibitor with excellent DMPK profiles and in vivo efficacy in a postprandial lipid excursion model in mice. Based on the overall biological and developability profiles and acceptable safety profiles in the 7-day toxicity studies in rats and dogs, compound 26d was selected as a candidate compound for further development in the treatment of metabolic disorders.

The factors and motivations behind United Kingdom chiropractic professional association membership: a survey of the Welsh Institute of Chiropractic Alumni.

PubMed

Wotherspoon, Sheena E; McCarthy, Peter W

2016-01-01

There are many professional associations representing chiropractors and chiropractic in the United Kingdom (UK). Each has its unique selling points (USPs) and chiropractors can choose to join as many as they like; however, cost of membership has to be weighed against perceived benefits. The predictors of UK chiropractic association membership and motivational factors to join these associations, have not formally been identified. This research study aimed to identify some of the factors and motivations in Welsh Institute of Chiropractic (WIOC) Alumni regarding their decision to join (or not) a UK chiropractic professional association. An online survey instrument, comprising 23 questions, was administered from November-December 2015 via a link announced on 'The WIOC Alumni' Facebook group (N = 655), the active platform for the WIOC Alumni Organisation. One hundred forty-eight respondents (approximately 22.6 % of 'The WIOC Alumni' Facebook group membership) completed the survey. Ten factors were reported to be important in decision making: 'promoting public awareness of chiropractic' (91.2 %), 'access to professional indemnity insurance' (89.2 %), 'overall professionalism of the association' (87.2 %), 'the identity of the association' (77.7 %), 'positive attitude to research' (77.0 %), 'workplace support and advice' (68.9 %), 'access to events \\ courses \\ seminars' (64.2 %), 'Continuing Professional Development (CPD) activities' (62.2 %), 'cost of membership' (59.5 %) and 'addresses my area of interest' (56.1 %). 'Many of my friends have joined' (71.6 %) was considered unimportant, whereas 'Lobbying: Influencing policy' and 'career development' were considered important by almost twice as many as those that consider them unimportant (45.3 %: 25.7 % and 43.9 %: 27.0 % respectively), 'requirement of employment' and 'associations newsletter' were seen as unimportant by roughly twice as many as those considering them important (44.6 %: 28.4 % and 35.8 %: 28.4 % respectively). Should it become an option, almost 71 % of respondents would support the unification of the four main UK chiropractic associations, (the British, McTimoney, Scottish and United, Chiropractic Associations: BCA MCA, SCA and UCA, respectively). Several factors have an important effect on motivations to join UK chiropractic professional associations. Further research is required to determine if this is WIOC specific or can be extrapolated more generally.

ARC-2009-ACD09-0108-012

NASA Image and Video Library

2009-02-08

An SUV-sized Asteroid 2008TC# Impacts on October 7, 2008 in the Nubian Desert, Northern Sudan: Dr. Peter Jenniskens, NASA/SETI joined Muawia Shaddas of the University of Khartoum in leading an expedition on a search for samples. (group photo) Photo Credit: NASA/SETI/P. Jenniskens

A block randomized controlled trial of a brief smoking cessation counselling and advice through short message service on participants who joined the Quit to Win Contest in Hong Kong.

PubMed

Chan, Sophia S C; Wong, David C N; Cheung, Yee Tak Derek; Leung, Doris Y P; Lau, Lisa; Lai, Vienna; Lam, Tai-Hing

2015-08-01

The present trial examined the effectiveness of brief interventions for smokers who joined the Hong Kong Quit to Win Contest to quit smoking. A block randomized controlled trial allocated 1003 adult daily smokers to three groups: (i) The TEL group (n = 338) received a 5-min nurse-led telephone counselling; (ii) The SMS group (n = 335) received eight text messages through mobile phone and (iii) The CONTROL group (n = 330) did not receive the above interventions. Participants with biochemically verified abstinence at 6-month follow-up could receive cash incentive. The primary outcome was the self-reported 7-day point prevalence (PP) of tobacco abstinence at 6-month follow-up. The abstinence rate in the TEL, SMS and CONTROL group was 22.2, 20.6 and 20.3%, respectively (P for TEL versus CONTROL = 0.32; P for SMS versus CONTROL = 0.40). When abstinence at 2-, 6- and 12-month follow-up was modelled simultaneously, the TEL group had a higher abstinence than the CONTROL group (Adjusted OR = 1.38, 95% CI = 1.01-1.88, P = 0 .04). In the Quit to Win Contest, the brief telephone counselling might have increased abstinence, but the text messages had no significant effect. Further studies on intensive intervention and interactive messaging services are warranted. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.

37th Training Wing > Units > Inter-American Air Forces Academy

Science.gov Websites

37th Training Wing 37th Training Wing Join the Air Force Home News Commentaries Features Photos Art Information CAC/ID Card Information Units 37th Training Group 341st Training Squadron 344th Training Squadron 37th Training Wing Staff Agency 737th Training Group Defense Language Institute English Language Center

The Effect of 12 Weeks of Ski Training on Some Biometric Features of Girls

ERIC Educational Resources Information Center

Tas, Murat; Kiyici, Elif; Kiyci, Fatih

2018-01-01

The aim of this study was to investigate the effect of skiing on the biomotoric characteristics of children with evaluating tests of girls between the ages of eight and 14 before and after the season. The experimental group of this study was 15 girls who had just started skiing and the control group of 30 girls. In total, 45 volunteers joined the…

Military Review, February 1992. Volume 72, Number 2

DTIC Science & Technology

1992-02-01

these in turn become fac- tors for Army doctrine. The new strategy has four foundations: nuclear deterrence, forward presence, crisis response and...Today, a select group of officers at Fort mands of the nation. I encourage you to join the Leavenworth is leading the effort to revise US discussion by... Group ; deputy commandant of the US Army Command and General Staff College, For Leavenworth, Kansas: and commanding general, Ist Infantry Division

On-farm quality assurance programs: a survey of producer and industry leader opinions.

PubMed

Payne, M; Bruhn, C M; Reed, B; Scearce, A; O'Donnell, J

1999-10-01

To assess interest in implementing a California dairy quality assurance program, practices and opinions of dairy producers and industry leaders were surveyed by a mailed questionnaire and by focus groups. The majority of the 55 participants in the focus group were dairy producers; processor marketing executives, extension dairy advisors, packinghouse executives, and dairy veterinarians were represented. The consensus among the focus groups was that a quality assurance program should be voluntary, be managed by creameries, and confer an economic advantage to participants. Focus group members listed chemical and microbial food safety (in both meat and milk), environmental health, and animal welfare as issues that should be addressed. Of the 1440 questionnaires mailed with producers' milk checks, 413 were returned. Information was collected regarding opinions and practices pertaining to administration of drugs to animals, medical records and animal identification, culling practices, manure management, cow welfare, and feeding of animal protein. An overwhelming 99% of producers believed they were responsible for the safety of meat and milk leaving the farm. Sixty percent of producers said that they would consider joining a California-specific quality assurance program, whereas 9% indicated that they would not. Producers would be more likely to join if their processor believed it would impart a market advantage and if the program standards were controlled by producers.

In-Network Processing of an Iceberg Join Query in Wireless Sensor Networks Based on 2-Way Fragment Semijoins

PubMed Central

Kang, Hyunchul

2015-01-01

We investigate the in-network processing of an iceberg join query in wireless sensor networks (WSNs). An iceberg join is a special type of join where only those joined tuples whose cardinality exceeds a certain threshold (called iceberg threshold) are qualified for the result. Processing such a join involves the value matching for the join predicate as well as the checking of the cardinality constraint for the iceberg threshold. In the previous scheme, the value matching is carried out as the main task for filtering non-joinable tuples while the iceberg threshold is treated as an additional constraint. We take an alternative approach, meeting the cardinality constraint first and matching values next. In this approach, with a logical fragmentation of the join operand relations on the aggregate counts of the joining attribute values, the optimal sequence of 2-way fragment semijoins is generated, where each fragment semijoin employs a Bloom filter as a synopsis of the joining attribute values. This sequence filters non-joinable tuples in an energy-efficient way in WSNs. Through implementation and a set of detailed experiments, we show that our alternative approach considerably outperforms the previous one. PMID:25774710

Researching Gender Professions: Nurses as Professionals

ERIC Educational Resources Information Center

Zufiaurre, Benjamin; de Villarreal, Maider Pérez

2018-01-01

Nurses as professionals of health, childhood education teachers, social workers and caregivers, join a group of "feminine professions" which grew through policies of a welfare state in postwar constructive period, or in times of postwar accords (Jones, 1983). These professions are under challenge because of neoliberal policies and…

Education On-Line.

ERIC Educational Resources Information Center

Andres, Yvonne Marie

1993-01-01

Estimated 50,000 teachers worldwide are using the Internet to tap university computerized library catalogs, exchange E-mail, read news bulletins, and join "chat" groups on various topics. FrEdMail (Free Educational Electronic Mail) is a nonprofit chain of computer bulletin boards giving schools the ability to exchange messages,…

VIG Seminar April 5, 2018 Rachel Van Duyne and Melissa Fernandez | Center for Cancer Research

Cancer.gov

Please join us for the Virology Interest Group Seminar on Thursday, April 5th, from 2:30 until 3:30 in Frederick, Building 549, Conference Room A. The seminar will also be broadcasted to Bethesda, Building 50, Room 2328.

As Patient Navigation Expands and Evolves, Nurses Assume Many Roles

Cancer.gov

It can be difficult to access care in our labyrinthine health care system. Oncology nurses are joining the ranks of patient navigators—a diverse group of people who help patients at all stages of cancer care, from screening and diagnosis to treatment and survivorship.

Endangered Species Day | Endangered Species Coalition

Science.gov Websites

Skip to content About Us Staff Board Advisory Board Scientific Advisory Committee Endangered Species Day Advisory Board Member Groups Blog Campaigns Endangered Species Day Southern Resident Orcas Species Education Program Vanishing Endangered Species Take Action Join the Activist Network Become a

High Temperature Joining and Characterization of Joint Properties in Silicon Carbide-Based Composite Materials

NASA Technical Reports Server (NTRS)

Halbig, Michael C.; Singh, Mrityunjay

2015-01-01

Advanced silicon carbide-based ceramics and composites are being developed for a wide variety of high temperature extreme environment applications. Robust high temperature joining and integration technologies are enabling for the fabrication and manufacturing of large and complex shaped components. The development of a new joining approach called SET (Single-step Elevated Temperature) joining will be described along with the overview of previously developed joining approaches including high temperature brazing, ARCJoinT (Affordable, Robust Ceramic Joining Technology), diffusion bonding, and REABOND (Refractory Eutectic Assisted Bonding). Unlike other approaches, SET joining does not have any lower temperature phases and will therefore have a use temperature above 1315C. Optimization of the composition for full conversion to silicon carbide will be discussed. The goal is to find a composition with no remaining carbon or free silicon. Green tape interlayers were developed for joining. Microstructural analysis and preliminary mechanical tests of the joints will be presented.

Nature-Inspired Dissemination of Information in P2P Networks

NASA Astrophysics Data System (ADS)

Guéret, Christophe

After having first been used as a means to publish content, the Web is now widely used as a social tool for sharing information. It is an easy task to subscribe to a social network, join one of the Web-based communities according to some personal interests and start to share content with all the people who do the same. It is easy once you solve two basic problems: select the network to join (go to hi5, facebook, myspace,…? join all of them?) and find/pick up the right communities (i.e., find a strict label to match non-strict centers of interest). An error of appreciation would result in getting too much of useless/non-relevant information. This chapter provides a study on the dissemination of information within groups of people and aim at answering one question: can we find an effortless way of sharing information on the Web? Ideally, such a solution would require neither the definition of a profile nor the selection of communities to join. Publishing information should also not be the result of an active decision but be performed in an automatic way. A nature-inspired framework is introduced as an answer to this question. This framework features artificial ants taking care of the dissemination of information items within the network. Centers of interest of the users are reflected by artificial pheromones laid down on connections between peers. Another part of the framework uses those pheromone trails to detect shared interests and creates communities.

Does theatre improve the quality of life of people with dementia?

PubMed

van Dijk, A Marijke; van Weert, Julia C M; Dröes, Rose-Marie

2012-03-01

A new communication method, the "Veder method", has recently been developed. Caregivers are trained to apply this method in a group activity ("living-room theatre activity") for people with dementia in which theatrical stimuli are used in combination with proven emotion-oriented care methods. The aim of this exploratory study was to evaluate the added value of the Veder method group activity compared to a regular reminiscence group activity and to investigate whether professional carers can achieve the same effects with the Veder method as professional actors. A quasi-experimental three-group design was used. Experimental group 1 (E1; n = 65) joined a living-room theatre activity offered by trained professional caregivers. Experimental group 2 (E2; n = 31) joined a living-room theatre activity offered by professional actors. The control group (n = 55) received a usual reminiscence group activity. Behavior, mood and aspects of quality of life were measured using standardized observation scales at three points in time: (T1) pretest; (T2) during the intervention and; (T3) post-test, two hours after the intervention. During the intervention, significant differences were found in favor of the group that was offered a living-room theatre activity by actors (E2) on different aspects of behavior, mood and quality of life. At post-test, people in E2 were more alert compared to the control group. Moreover, they recalled more memories and showed less socially isolated behavior compared to the control group. This exploratory study shows that the Veder method has some clear positive effects on behavior and mood of people with dementia when applied by professional actors.

Improving recruitment to pharmacological trials for illicit opioid use: findings from a qualitative focus group study.

PubMed

Neale, Joanne; Tompkins, Charlotte N E; McDonald, Rebecca; Strang, John

2018-06-01

To explore potential study participants' views on willingness to join clinical trials of pharmacological interventions for illicit opioid use to inform and improve future recruitment strategies. Qualitative focus group study [six groups: oral methadone (two groups); buprenorphine tablets (two groups); injectable opioid agonist treatment (one group); and former opioid agonist treatment (one group)]. Drug and alcohol services and a peer support recovery service (London, UK). Forty people with experience of opioid agonist treatment for heroin dependence (26 males, 14 females; aged 33-66 years). Data collection was facilitated by a topic guide that explored willingness to enrol in clinical pharmacological trials. Groups were audio-recorded and transcribed. Transcribed data were analysed inductively via Iterative Categorization. Participants' willingness to join pharmacological trials of medications for opioid dependence was affected by factors relating to study burden, study drug, study design, study population and study relationships. Participants worried that the trial drug might be worse than, or interfere with, their current treatment. They also misunderstood aspects of trial design despite the researchers' explanations. Recruitment of participants for clinical trials of pharmacological interventions for illicit opioid use could be improved if researchers became better at explaining clinical trials to potential participants, dispelling misconceptions about trials and increasing trust in the research process and research establishment. A checklist of issues to consider when designing pharmacological trials for illicit opioid use is proposed. © 2018 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.

A Pilot Study to Determine the Effect of an Educational DVD in Philippine Languages on Cancer Clinical Trial Participation among Filipinos in Hawai'i.

PubMed

Felicitas-Perkins, Jamie Q; Palalay, Melvin Paul; Cuaresma, Charlene; Ho, Reginald Cs; Chen, Moon S; Dang, Julie; Loui, William S

2017-07-01

We conducted an experimental pilot study in an oncology clinic in Honolulu, Hawai'i to determine the effect of a culturally-tailored educational DVD on cancer clinical trial participation among Filipino cancer patients. Thirty-seven patients participated in the study, with 17 randomized into the control group (ie, usual education) and 20 into the intervention group (ie, usual education plus educational DVD). Participants completed pre- and post-educational questionnaires with items asking about understanding of several cancer topics, behavioral outcomes, and attitudes regarding several treatment and physician related topics. A Fisher's exact test was conducted to explore the association between enrollment into a clinical trial and group assignment. General linear models were created to determine significant differences between study groups in post-education response scores for each questionnaire item after controlling for age, gender, education, and pre-education response scores. Two participants from the control group and three participants from the intervention group enrolled into clinical trials. Results showed no significant association between clinical trial enrollment and study group assignment ( P > .99). A significant difference was found between study groups on surety of joining the clinical trial suggested to them ( P = .013). A multilingual educational DVD to supplement clinical trial education may positively influence Filipino cancer patients to move forward with the decision to join a cancer clinical trial. However, health literacy may serve as a major barrier to actual enrollment into the particular clinical trial available to a patient.

Joining the Global Community.

ERIC Educational Resources Information Center

Cawley, John; Knoester, Jocelyn

2002-01-01

Canada World Youth enables young Canadians to live in another part of Canada with youths from a developing country for several months while volunteering in community projects. Then they move as a group to the partner country for several months where the program structure is the same. Participants acquire the skills and values necessary to…

Settling the 'Score' with Heart Disease

NASA Technical Reports Server (NTRS)

2004-01-01

Technology and medicine forged a bond in 1986 when a group of dedicated NASA scientists, University of Southern California (USC) medical professors, and a Dutch cardiologist joined forces to prevent heart attacks, using ultrasound images of astronauts blood-flow patterns and the supercomputer depended upon to orchestrate the "Star Wars" Strategic Defense Initiative.

International Field Experience--What Do Student Teachers Learn?

ERIC Educational Resources Information Center

Lee, Jackie Fung King

2011-01-01

This inquiry aimed to examine the benefits of having international field experience for a group of Hong Kong postgraduate student teachers who joined a six-week immersion programme in New Zealand. Through participants' reflections, interviews and programme evaluations, the present investigation found that the overseas field experience not only…

Science Club--A Concept

ERIC Educational Resources Information Center

Wegner, Claas; Issak, Nicole; Tesch, Katharina; Zehne, Carolin

2016-01-01

The following article presents a concept of a science club which was developed by two master's students as a part of their thesis and which has been developed and improved ever since. The extra-curricular concept emphasises pupils' individuality through focusing on problem based leaning, station learning, and mixed age groups. Having joined the…

5 CFR 251.201 - Associations of management officials and/or supervisors.

Code of Federal Regulations, 2013 CFR

2013-01-01

... voluntary joining together of supervisory and management personnel in groups of associations shall not be... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Associations of management officials and/or supervisors. 251.201 Section 251.201 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL...

5 CFR 251.201 - Associations of management officials and/or supervisors.

Code of Federal Regulations, 2011 CFR

2011-01-01

... voluntary joining together of supervisory and management personnel in groups of associations shall not be... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Associations of management officials and/or supervisors. 251.201 Section 251.201 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL...

Lifeworld-Oriented Family Support

ERIC Educational Resources Information Center

Razpotnik, Špela; Turnšek, Nada; Rapuš-Pavel, Jana; Poljšak-Škraban, Olga

2016-01-01

Since the spring of 2014, the authors of this article, joined by a wider group of students, have been dedicated to researching vulnerable families and their involvement with education systems. In the initial phase, we explored the experiences and challenges that these families face and how they understand and address these challenges. Next, we…

Eric Kozubal | NREL

Science.gov Websites

researches new methods and technologies for energy-efficient air conditioning systems. He has tested more -6155 Eric joined NREL in 2002 and is a member of the Commercial Buildings Research Group. Eric recommendations. He uses tools such as CAD, Matlab, Engineer Equation Solver, Excel, and statistical software to

Maine Leading Initiative for Multistate Tech. Buys

ERIC Educational Resources Information Center

Cavanagh, Sean

2013-01-01

A group of states has joined forces to arrange the purchase of an unusually comprehensive set of educational-technology devices and services, in a compact that could foreshadow other cooperative efforts by state and local governments attempting to turn the digital-procurement process to their advantage. The initial partners in the multistate…

Going the Second Mile. One Way of Looking at It

ERIC Educational Resources Information Center

Van Til, William

1974-01-01

Desegregation, still in process, constituted the first mile. Now desegregation is making few major gains. Through the approaches of "community study, democratic atmosphere, curriculum permeation, and group dynamics," joined by the current emphasis on the "direct experience" approach, perhaps the second mile can be traveled to achieve integration.…

Performance, Cognitive Load, and Behaviour of Technology-Assisted English Listening Learning: From CALL to MALL

ERIC Educational Resources Information Center

Chang, Chi-Cheng; Warden, Clyde A.; Liang, Chaoyun; Chou, Pao-Nan

2018-01-01

This study examines differences in English listening comprehension, cognitive load, and learning behaviour between outdoor ubiquitous learning and indoor computer-assisted learning. An experimental design, employing a pretest-posttest control group is employed. Randomly assigned foreign language university majors joined either the experimental…

Action Learning Drives the Emerald Academy

ERIC Educational Resources Information Center

Nalborczyk, Sarah; Sandelands, Luke

2012-01-01

This account examines the action learning process adopted by Emerald Group Publishing Ltd., embedded in the organization through the in-company Emerald Academy. In case study format, the paper emphasizes that in order to align learning with organizational objectives joined up thinking and practice is needed beyond the learning and development…

MTP: An atomic multicast transport protocol

NASA Technical Reports Server (NTRS)

Freier, Alan O.; Marzullo, Keith

1990-01-01

Multicast transport protocol (MTP); a reliable transport protocol that utilizes the multicast strategy of applicable lower layer network architectures is described. In addition to transporting data reliably and efficiently, MTP provides the client synchronization necessary for agreement on the receipt of data and the joining of the group of communicants.

Black-Brown Relations: Are Alliances Possible?

ERIC Educational Resources Information Center

Klor de Alva, J. Jorge; West, Cornel

1997-01-01

Dialogue between Cornel West and Jorge Klor de Alva explores the question of black-brown alliances, those between African Americans and Hispanic Americans. If minority groups can put aside the difference of skin color and join to combat economic and social racism, they can have far-reaching and meaningful impacts on society. (SLD)

Joining Hands against Bullying

ERIC Educational Resources Information Center

Weissbourd, Richard; Jones, Stephanie

2012-01-01

Over the last 20 years, high-profile episodes of bullying have stirred up broad public alarm. This attention may appear to be merely trendy, but it's important. Bullying--commonly defined as systematic exclusion, aggression, or harassment that one child or a group of children inflicts on less powerful children--is pervasive in schools. Many…

Joining the Dots between Teacher Education and Widening Participation in Higher Education

ERIC Educational Resources Information Center

Duckworth, Vicky; Thomas, Liz; Bland, Derek

2016-01-01

In England and Australia, higher education institutions are required to widen participation in higher education by including students from under-represented and non-traditional groups. Widening participation is most effective when it starts early--during compulsory education and other forms of pre-tertiary education. Higher education institutions…

Technology: nursing the system. Technology and the potential for entrepreneurship.

PubMed

Simpson, R L

1997-10-01

Many nurses are stepping beyond the boundaries of traditional practice and creating their own business or service centers. New entrepreneurial opportunities include working on computer-based patient records, providing consulting services, developing policies and more. Getting involved--joining informatics groups, taking classes--is the first step.

75 FR 47606 - Strategic Plan for Consumer Education via Cooperative Agreement (U18)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... or quantitative research with stakeholders and meetings with stakeholder groups and consumer experts... and resulting from an extensive consumer research process. In 2007, PFSE joined with USDA to create... responsibilities of FDA. B. Research Objectives PFSE supports a large, complex, and multi-faceted consumer food...

Information Portals: The Next Generation Catalog

ERIC Educational Resources Information Center

Allison, DeeAnn

2010-01-01

Libraries today face an increasing challenge: to provide relevant information to diverse populations with differing needs while competing with Web search engines like Google. In 2009, a large group of libraries, including the University of Nebraska-Lincoln Libraries, joined with Innovative Interfaces as development partners to design a new type of…

Joining the Struggle: White Men as Social Justice Allies

ERIC Educational Resources Information Center

Bridges, Christopher Edward; Mather, Peter

2015-01-01

This study explored the experience of White men as they sought to support individuals from oppressed groups and participate in a community with other allies like themselves. This research was conducted from a social constructivist epistemological paradigm and informed by a constructivist grounded theory methodology. The following research…

Joshua McTigue | NREL

Science.gov Websites

Engineering JoshuaDominic.McTigue@nrel.gov | 303-275-4682 Josh joined the Thermal Systems Group at NREL in integrate geothermal power, concentrating solar power and thermal energy storage. For his graduate work , Josh researched packed-bed thermal storage with an emphasis on exergy analysis and system design and

Joining of graphene flakes by low energy N ion beam irradiation

NASA Astrophysics Data System (ADS)

Wu, Xin; Zhao, Haiyan; Pei, Jiayun; Yan, Dong

2017-03-01

An approach utilizing low energy N ion beam irradiation is applied in joining two monolayer graphene flakes. Raman spectrometry and atomic force microscopy show the joining signal under 40 eV and 1 × 1014 cm-2 N ion irradiation. Molecular dynamics simulations demonstrate that the joining phenomenon is attributed to the punch-down effect and the subsequent chemical bond generation between the two sheets. The generated chemical bonds are made up of inserted ions (embedded joining) and knocked-out carbon atoms (saturation joining). The electronic transport properties of the joint are also calculated for its applications.

Precision Joining Center

NASA Astrophysics Data System (ADS)

Powell, J. W.; Westphal, D. A.

1991-08-01

A workshop to obtain input from industry on the establishment of the Precision Joining Center (PJC) was held on July 10-12, 1991. The PJC is a center for training Joining Technologists in advanced joining techniques and concepts in order to promote the competitiveness of U.S. industry. The center will be established as part of the DOE Defense Programs Technology Commercialization Initiative, and operated by EG&G Rocky Flats in cooperation with the American Welding Society and the Colorado School of Mines Center for Welding and Joining Research. The overall objectives of the workshop were to validate the need for a Joining Technologists to fill the gap between the welding operator and the welding engineer, and to assure that the PJC will train individuals to satisfy that need. The consensus of the workshop participants was that the Joining Technologist is a necessary position in industry, and is currently used, with some variation, by many companies. It was agreed that the PJC core curriculum, as presented, would produce a Joining Technologist of value to industries that use precision joining techniques. The advantage of the PJC would be to train the Joining Technologist much more quickly and more completely. The proposed emphasis of the PJC curriculum on equipment intensive and hands-on training was judged to be essential.

Conjoint Forming - Technologies for Simultaneous Forming and Joining

NASA Astrophysics Data System (ADS)

Groche, P.; Wohletz, S.; Mann, A.; Krech, M.; Monnerjahn, V.

2016-03-01

The market demand for new products optimized for e. g. lightweight applications or smart components leads to new challenges in production engineering. Hybrid structures represent one promising approach. They aim at higher product performance by using a suitable combination of different materials. The developments of hybrid structures stimulate the research on joining of dissimilar materials. Since they allow for joining dissimilar materials without external heating technologies based on joining by plastic deformation seem to be of special attractiveness. The paper at hand discusses the conjoint forming approach. This approach combines forming and joining in one process. Two or more workpieces are joined while at least one workpiece is plastically deformed. After presenting the fundamental joining mechanisms, the conjoint forming approach is discussed comprehensively. Examples of conjoint processes demonstrate the effectiveness and reveal the underlying phenomena.

Inclusiveness and crossed categorization: effects on co-joined category evaluations of in-group and out-group primes.

PubMed

Crisp, Richard J; Hewstone, Miles; Richards, Zoë; Paolini, Stefania

2003-03-01

This experiment builds on preliminary work (Crisp & Hewstone, 2000b) that revealed moderation of crossed-category evaluations via priming with an in-group inclusive pronoun (e.g. 'we'). Using a computerized minimal group classification procedure and a 'proofreading' priming task, participants were asked to evaluate different crossed-category groups following either a neutral, an inclusive (in-group), or an exclusive (out-group) prime. The results supported the notion that inclusiveness priming can moderate how perceivers represent and evaluate composite social groups. In addition, measures of perceived inclusiveness and importance suggested that such structural aspects of social categories are an important consideration for future multiple categorization work.

Near-Infrared Neodymium Tag for Quantifying Targeted Biomarker and Counting Its Host Circulating Tumor Cells.

PubMed

Liu, Chunlan; Lu, Shu; Yang, Limin; Chen, Peijie; Bai, Peiming; Wang, Qiuquan

2017-09-05

Quantitative information on a targeted analyte in a complex biological system is the most basic premise for understanding its involved mechanisms, and thus precise diagnosis of a disease if it is a so-called biomarker. Here, we designed and synthesized a neodymium (Nd)-cored tag [1,4,7,10-tetraazacyclododecane-1,4,7-trisacetic acid (DOTA)-Nd complex together with a light-harvesting antenna aminofluorescein (AMF, λ ex/em = 494/520 nm), AMF-DOTA-Nd] with duplex signals, second near-infrared (NIR) window luminescence (λ em = 1065 nm, 2.5 μs), and stable isotopic mass ( 142 Nd). AMF-DOTA-Nd covalently linked with a urea-based peptidomimetic targeting group, 2-[3-(1,3-dicarboxypropyl)-ureido]pentanedioic acid (DUPA)-8-Aoc-Phe-Phe-Cys (DUPAaFFC) (DUPAaFFC-AMF-DOTA-Nd), allowing us to detect and quantify prostate-specific membrane antigen (PSMA) and its splice variants (total PSMA, tPSMA), which was set as an example of targeted biomarkers in this study, using NIR and inductively coupled plasma mass spectrometry (ICPMS) with the limit of detection (LOD) (3σ) of 0.3 ng/mL. When it was applied to the analysis of 80 blood samples from prostate cancer (PCa) and benign prostatic hyperplasia (BPH) patients as well as healthy volunteers, we found that 320 and 600 ng/mL tPSMA could be recommended as the threshold values to differentiate BPH from PCa and for the diagnosis of PCa. Moreover, PSMA-positive circulating tumor cells (CTCs) were counted using ICPMS being from 134 to 773 CTCs in the PCa blood samples of the Gleason score from 6 to 9 when the cell membrane-spanning mPSMA was tagged. Such a methodology developed could be expected to be applicable to other clinic-meaningful biomolecules and their host CTCs in liquid biopsy, when other specific targeting groups are modified to the NIR Nd tag.

Affordable, Robust Ceramic Joining Technology (ARCJoint) Developed

NASA Technical Reports Server (NTRS)

Steele, Gynelle C.

2001-01-01

Affordable, Robust Ceramic Joining Technology (ARCJoint) is a method for joining high temperature- resistant ceramic pieces together, establishing joints that are strong, and allowing joining to be done in the field. This new way of joining allows complex shapes to be formed by joining together geometrically simple shapes. The joining technology at NASA is one of the enabling technologies for the application of silicon-carbide-based ceramic and composite components in demanding and high-temperature applications. The technology is being developed and tested for high-temperature propulsion parts for aerospace use. Commercially, it can be used for joining ceramic pieces used for high temperature applications in the power-generating and chemical industries, as well as in the microelectronics industry. This innovation could yield big payoffs for not only the power-generating industry but also the Silicon Valley chipmakers. This technology, which was developed at the NASA Glenn Research Center by Dr. Mrityunjay Singh, is a two-step process involving first using a paste to join together ceramic pieces and bonding them by heating the joint to 110 to 120 C for between 10 and 20 min. This makes the joint strong enough to be handled for the final joining. Then, a silicon-based substance is applied to the joint and heated to 1400 C for 10 to 15 min. The resulting joint is as strong as the original ceramic material and can withstand the same high temperatures.

Workflow technology: the new frontier. How to overcome the barriers and join the future.

PubMed

Shefter, Susan M

2006-01-01

Hospitals are catching up to the business world in the introduction of technology systems that support professional practice and workflow. The field of case management is highly complex and interrelates with diverse groups in diverse locations. The last few years have seen the introduction of Workflow Technology Tools, which can improve the quality and efficiency of discharge planning by the case manager. Despite the availability of these wonderful new programs, many case managers are hesitant to adopt the new technology and workflow. For a myriad of reasons, a computer-based workflow system can seem like a brick wall. This article discusses, from a practitioner's point of view, how professionals can gain confidence and skill to get around the brick wall and join the future.

The joined wing - An overview. [aircraft tandem wings in diamond configurations

NASA Technical Reports Server (NTRS)

Wolkovitch, J.

1985-01-01

The joined wing is a new type of aircraft configuration which employs tandem wings arranged to form diamond shapes in plan view and front view. Wind-tunnel tests and finite-element structural analyses have shown that the joined wing provides the following advantages over a comparable wing-plus-tail system; lighter weight and higher stiffness, higher span-efficiency factor, higher trimmed maximum lift coefficient, lower wave drag, plus built-in direct lift and direct sideforce control capability. A summary is given of research performed on the joined wing. Calculated joined wing weights are correlated with geometric parameters to provide simple weight estimation methods. The results of low-speed and transonic wind-tunnel tests are summarized, and guidelines for design of joined-wing aircraft are given. Some example joined-wing designs are presented and related configurations having connected wings are reviewed.

Improved satisfaction of preoperative patients after group video-teaching during interview at preanesthetic evaluation clinic: the experience of a medical center in Taiwan.

PubMed

Yang, Ya-Ling; Wang, Kuan-Jen; Chen, Wei-Hao; Chuang, Kuan-Chih; Tseng, Chia-Chih; Liu, Chien-Cheng

2007-09-01

Anesthesiologist-directed anesthetic preoperative evaluation clinic (APEC) is used to prepare patients to receive anesthesia for surgery. Studies have shown that APEC can reduce preoperative tests, consultations, surgery delays and cancellations. APEC with video-teaching has been purposed as a medium to provide comprehensive information about the process of anesthesia but it has not been practiced in small groups of patients. It is rational to assume that video-teaching in a small group patients can provide better information to patients to understand the process of anesthesia and in turn improve their satisfaction in anesthesia practice. This study was designed to evaluate the difference of satisfaction between patients who joined in small group video-teaching at APEC and patients who paid a traditional preoperative visit in the waiting area, using questionnaire for evaluation. Totally, 237 eligible patients were included in the study in a space of two months. Patients were divided in two groups; 145 patients joined the small group video-teaching designated as study group and 92 patients who were paid traditional preoperative visit at the waiting area served as control. All patients were requested to fill a special questionnaire after postoperative visit entrusted to two non-medical persons. There were significantly higher scores of satisfaction in anesthesia inclusive of waiting time for surgery in the operation room, attitude towards anesthetic staffs during postoperative visit and management of complications in patients who were offered small group video-teaching in comparison with patients of traditional preoperative visit. The results indicated that APEC with group video-teaching could not only make patients more satisfied with process of anesthesia in elective surgery but also reduce the expenditure of hospitalization and anesthetic manpower.

Group Occupational Health Service in a Developing Country

PubMed Central

de Glanville, H.

1970-01-01

In 1967 an experimental group occupational health service was set up in Dar es Salaam to provide direct service to industrial firms. Larger companies were visited by a doctor, smaller firms in rotation by auxiliaries. After three years 65 companies had joined with over 15,000 employees, and workers were attending the group dispensaries at a rate of over 250,000 visits a year. Such an approach through direct service to the working community appears to be more appropriate to a developing country than a purely advisory central occupational health unit. PMID:5483327

Korean Military Advisory Group (KMAG): A Model for Success

DTIC Science & Technology

2010-05-15

43-45. 16 Alan Millett, The War in Korea, 1945-1950: A House Burning, ( Lawrence : University Press of Kansas, 2005), 172 17 Ibid., 75 18...A great step forward for the advisory effort came in the form of US Army Captain James H. Hausman . Captain Hausman came to Korea in 1946 as one of...group that Hausman joined in 1946 was an organization in crisis, run with limited resources. His mandate from the nascent advisory group’s commander

A Small War: The Development of the Russian-Chechen Conflict, 1994-2010

DTIC Science & Technology

2011-04-01

joined America and other nations as a member of the Financial Action Task Force ( FATF ./36 By 2004, a Central Asian FATF regional body formed to focus...assisting or working with FATF labeled terrorist groups. Althotlgh Chechnya remains a high criine area, 139 the combination of high profile worldwide

Guidelines and Strategies for Cross-Cultural Counseling with Korean American Clients

ERIC Educational Resources Information Center

Kim, Yea Sun Eum

2005-01-01

The 3 major topics discussed begin with a recommendation of family counseling as the primary therapeutic modality for Korean Americans. Second, the article recommends various culturally congruent joining strategies, presented in 5 general groups. The 3rd major section of the article offers the cross-cultural counselor strategies for therapeutic…

Metrics, Business Plans, and the Vanishing Public Good

ERIC Educational Resources Information Center

Tuchman, Gaye

2011-01-01

For at least 30 years, professional work has been changing. Even such once-elite professionals as doctors, lawyers, and professors have become subject to significant control. Single-practitioner medical practices have given way to group practices subject to the rules of insurance plans; lawyers join mammoth firms where paralegals time the steps…

Language Centres as Translation-Service Providers: Joining Forces at European Level

ERIC Educational Resources Information Center

Harvey, Julia; Owen, David; Palumbo, Giuseppe

2017-01-01

The Translation Focus Group (TFG) within CercleS has paid particular attention to issues concerning the production of multilingual institutional texts within the context of European higher education, specifically in order to enhance the quality and effectiveness of terminology and style in ways that ensure the availability of the best possible…

National Centers for Environmental Prediction

Science.gov Websites

Mailing Lists There are two listservs for the MTT group: announce and discuss To join the listservs go here: Announce - https://lstsrv.ncep.noaa.gov/mailman/listinfo/ncep.list.emc_porting-announce Discuss - https://lstsrv.ncep.noaa.gov/mailman/listinfo/ncep.list.emc_porting-discuss To email the lists: Announce

An Integrated Professional and Transferable Skills Course for Undergraduate Chemistry Students

ERIC Educational Resources Information Center

Ashraf, S. Salman; Marzouk, Sayed A. M.; Shehadi, Ihsan A.; Murphy, Brian M.

2011-01-01

Upon graduation, chemistry majors often find themselves inadequately prepared for the "real world" that awaits them when they join the workplace. Some employers find chemistry graduates lacking written- and oral-communication skills, critical-thinking skills, group-work skills, as well as the ability to efficiently analyze data and retrieve…

Play as a Foundation for Hunter-Gatherer Social Existence

ERIC Educational Resources Information Center

Gray, Peter

2009-01-01

The author offers the thesis that hunter-gatherers promoted, through cultural means, the playful side of their human nature and this made possible their egalitarian, nonautocratic, intensely cooperative ways of living. Hunter-gatherer bands, with their fluid membership, are likened to social-play groups, which people could freely join or leave.…

Join the Party: Successful Educational Branding is a Group Effort

ERIC Educational Resources Information Center

Moore, Robert M.

2010-01-01

The education market is becoming more competitive and far more crowded. The economic downturn has caused many families to reconsider their priorities, re-evaluate their budgets, and refocus their attention. Once considered one of the dark arts, whose very tenets were unacceptable in a mission-based environment, branding is now widely regarded as…

Applying Item Response Theory Modeling in Educational Research

ERIC Educational Resources Information Center

Le, Dai-Trang

2013-01-01

In an effort to understand how school boards in America's K-12 school system function, a research collaboration was undertaken among four agencies: the National School Boards Association, the Thomas B. Fordham Institute, the Iowa Association of School Boards, and the Wallace Foundation. These groups joined effort to conduct research on school…

Community Collaboration Using a Unique Gallery as a Literacy Resource

ERIC Educational Resources Information Center

Voelker, Anita N.

2008-01-01

According to van der Pluijm (2006), an ecological community occurs when interacting groups, living in the same area, are joined together by the set of connections. This definition implies a symbiotic relationship and the acknowledgment that what affects one member or part of the community also affects the others. When the interconnections are…

Teach First: From Mckinsey to the Classroom

ERIC Educational Resources Information Center

Blandford, Sonia

2008-01-01

In June 2003 one hundred and eighty-six graduates from the United Kingdom (UK) Russell Group universities joined the Teach First (TF) programme which was to have a significant impact on Initial Teacher Education (ITE) in England, Europe and across the globe. This article describes the origins of the programme, provides a summary of evaluations and…

78 FR 22556 - Endangered and Threatened Wildlife and Plants; Revised Recovery Plan for Lost River Sucker and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

... very similar in ecology. They both predominantly inhabit lake environments but also periodically... from entrainment in water management structures, were cited as causes for declines in populations prior... survival is also low in these populations. The last time a substantial group of juveniles joined the adult...

Training HBCU Faculty and Students in Prostate Cancer (PC) Research: Signal Transduction and Receptor-Inhibitor Interactions in the Progress of PC

DTIC Science & Technology

2007-03-01

Katrina. Nicole Bell has continued to work on the crystal structures of tyrosine kinase inhibitors. A senior, Aviva Baird , has joined the group and...Sabbatical Internship, Marian Merrell Dow Pharmaceuticals. Participated in drug discovery of compounds that I synthesized; techniques included tumor

Developing Inquiry-as-Stance and Repertoires of Practice: Teacher Learning across Two Settings

ERIC Educational Resources Information Center

Braaten, Melissa L.

2011-01-01

Sixteen science educators joined a science teacher video club for one school year to collaboratively inquire into each other's classroom practice through the use of records of practice including classroom video clips and samples of student work. This group was focused on developing ambitious, equitable science teaching that capitalizes on…

Grant Wheeler | NREL

Science.gov Websites

Grant.Wheeler@nrel.gov | 303-275-4577 In November 2016, Grant joined NREL and works in the Commercial Buildings Research Group. His expertise is in commercial product development, as well as the vapor-compression cycle focused on developing residential HVAC systems for commercial sale. While at Texas A&M for his

Shanti Pless | NREL

Science.gov Websites

@nrel.gov | 303-384-6365 Orcid ID http://orcid.org/0000-0003-1054-3757 Shanti joined the Commercial Building Research Group at NREL in 1999 with a focus on applied research and design processes for commercial commercial buildings. He isleading the development of the next round of Advanced Energy Design Guides and

Acting Out! Combating Homophobia through Teacher Activism. Practitioner Inquiry Series

ERIC Educational Resources Information Center

Blackburn, Mollie V., Ed.; Clark, Caroline T., Ed.; Kenney, Lauren M., Ed.; Smith, Jill M., Ed.

2009-01-01

In this volume, teachers from urban, suburban, and rural districts join together in a teacher inquiry group to challenge homophobia and heterosexism in schools and classrooms. To create safe learning environments for all students they address key topics, including seizing teachable moments, organizing faculty, deciding whether to come out in the…

What Latino Students Want from School

ERIC Educational Resources Information Center

Irizarry, Jason G.

2015-01-01

If you asked Latino students how to improve schools for young people like themselves, what might they say? What recommendations might they have for educators committed to improving their education? The author invited a group of Latino high school students to join him as part of a research project. Their goal was to examine schooling experiences…

Developing Competencies in Science and Maths in Bulgaria

ERIC Educational Resources Information Center

Walsh, Ed

2012-01-01

Most countries are either reforming their education systems, or thinking about doing so. The EU, through its "Transversal" programme, funds hundreds of study visits every year to enable education professionals to learn at first hand about developments in its member states. The author joined a group from France, Germany, Italy, Portugal,…

Troubleshooting in Medical Offices

PubMed Central

Gillespie, A. B.

1977-01-01

Physicians usually go into practice with little or no instruction in how to manage their business affairs or organize their offices. Many questions, such as where to practice, whether to join a group and whether to incorporate, must be answered. Several sources of help are available, but nothing substitutes for knowledge of the basic principles outlined in this article.

3 CFR 8491 - Proclamation 8491 of April 1, 2010. National Donate Life Month, 2010

Code of Federal Regulations, 2011 CFR

2011-01-01

... of circumstances through organ, tissue, stem cell, and blood donation. During National Donate Life... groups, and private organizations to join forces to boost the number of organ, tissue, blood, and stem cell donors throughout our Nation. IN WITNESS WHEREOF, I have hereunto set my hand this first day of...

Reading-Strategy Use by English as a Second Language Learners in Online Reading Tasks

ERIC Educational Resources Information Center

Park, Ho-Ryong; Kim, Deoksoon

2011-01-01

This study investigates adult English language learners' reading-strategy use when they read online texts in hypermedia learning environments. The learners joined the online Independent English Study Group (IESG) and worked both individually and collaboratively. This qualitative case study aims (a) to assess college-level ESL learners' use of…

Guangdong Zhu | NREL

Science.gov Websites

Guangdong.Zhu@nrel.gov | 303-275-4497 Guangdong joined the Thermal Systems Group at NREL in 2010 and is working collectors is performed. He is also involved in optical and thermal modeling and economic analysis of solar , and presentations in the areas of multiphase flow, power generation systems, and solar thermal power

SLF Run & Walk

NASA Image and Video Library

2018-03-13

Kennedy Space Center Director Bob Cabana, center, is joined by a large group of center employees and guests as they participate in the KSC Walk Run on the Shuttle Landing Facility runway. The annual event, part of Kennedy’s Safety and Health Days, offers 10K, 5K and 2-mile options in the spirit of friendly competition.

VIG Seminar March 1, 2018 Alex Compton NCI-Frederick | Center for Cancer Research

Cancer.gov

Please join us for the Virology Interest Group Seminar on Thursday, March 1st, from 2:30 until 3:30 in Bethesda, Building 50, Room 2328. The seminar will also be broadcasted to Frederick, Building 549, Conference Room A. This seminar will be presented by Alex Compton, NCI-Frederick.

VIG Seminar February 1, 2018 Heather Hickman NIAID | Center for Cancer Research

Cancer.gov

Please join us for the Virology Interest Group Seminar on Thursday, February 1st, from 2:30 until 3:30 in Bethesda, Building 50, Room 2328. The seminar will also be broadcasted to Frederick, Building 549, Conference Room A. This seminar will be presented by Heather Hickman, NIAID.

Male Youth Perceptions of Violent Extremism: towards a Test of Rational Choice Theory.

PubMed

Dhami, Mandeep K; Murray, Jennifer

2016-09-20

Understanding how people perceive the pros and cons of risky behaviors such as terrorism or violent extremism represents a first step in developing research testing rational choice theory aiming to explain and predict peoples' intentions to engage in, or support, these behaviors. Accordingly, the present study provides a qualitative, exploratory analysis of a sample of 57 male youths' perceptions of the benefits and drawbacks of: (a) accessing a violent extremist website, (b) joining a violent extremist group, and (c) leaving such a group. Youth perceived significantly more drawbacks than benefits of joining a violent extremist group (p = .001, d = .46) and accessing a violent extremist website (p = .001, d = .46). The perceived benefits of engagement referred to gaining knowledge/awareness, being part of a group/similar people, and fighting the enemy/for a cause. The drawbacks referred to being exposed to negative material and emotions, having violent/criminal beliefs and behaviors, and getting in trouble with the law. The perceived benefits of disengagement referred to no longer committing illegal acts, and regaining independence/not being manipulated. The drawbacks referred to exposing oneself to harm and reprisal. These findings provide an insight into how male youth think about (dis)engagement in violent extremism, and can inform future quantitative research designed to explain and predict (dis)engagement in violent extremism. Eventually, such research may inform the development of evidence-based prevention and intervention strategies.

Finite element thermal analysis for PMMA/st.st.304 laser direct joining

NASA Astrophysics Data System (ADS)

Hussein, Furat I.; Salloomi, Kareem N.; Akman, E.; Hajim, K. I.; Demir, A.

2017-01-01

This work is concerned with building a three-dimensional (3D) ab-initio models that is capable of predicting the thermal distribution of laser direct joining processes between Polymethylmethacrylate (PMMA) and stainless steel 304(st.st.304). ANSYS® simulation based on finite element analysis (FEA) was implemented for materials joining in two modes; laser transmission joining (LTJ) and conduction joining (CJ). ANSYS® simulator was used to explore the thermal environment of the joints during joining (heating time) and after joining (cooling time). For both modes, the investigation is carried out when the laser spot is at the middle of the joint width, at 15 mm from the commencement point (joint edge) at traveling time of 3.75 s. Process parameters involving peak power (Pp=3 kW), pulse duration (τ=5 ms), pulse repetition rate (PRR=20 Hz) and scanning speed (v=4 mm/s) are applied for both modes.

Requirement for XLF/Cernunnos in alignment-based gap filling by DNA polymerases lambda and mu for nonhomologous end joining in human whole-cell extracts.

PubMed

Akopiants, Konstantin; Zhou, Rui-Zhe; Mohapatra, Susovan; Valerie, Kristoffer; Lees-Miller, Susan P; Lee, Kyung-Jong; Chen, David J; Revy, Patrick; de Villartay, Jean-Pierre; Povirk, Lawrence F

2009-07-01

XLF/Cernunnos is a core protein of the nonhomologous end-joining pathway of DNA double-strand break repair. To better define the role of Cernunnos in end joining, whole-cell extracts were prepared from Cernunnos-deficient human cells. These extracts effected little joining of DNA ends with cohesive 5' or 3' overhangs, and no joining at all of partially complementary 3' overhangs that required gap filling prior to ligation. Assays in which gap-filled but unligated intermediates were trapped using dideoxynucleotides revealed that there was no gap filling on aligned DSB ends in the Cernunnos-deficient extracts. Recombinant Cernunnos protein restored gap filling and end joining of partially complementary overhangs, and stimulated joining of cohesive ends more than twentyfold. XLF-dependent gap filling was nearly eliminated by immunodepletion of DNA polymerase lambda, but was restored by addition of either polymerase lambda or polymerase mu. Thus, Cernunnos is essential for gap filling by either polymerase during nonhomologous end joining, suggesting that it plays a major role in aligning the two DNA ends in the repair complex.

A Modeling Approach for Plastic-Metal Laser Direct Joining

NASA Astrophysics Data System (ADS)

Lutey, Adrian H. A.; Fortunato, Alessandro; Ascari, Alessandro; Romoli, Luca

2017-09-01

Laser processing has been identified as a feasible approach to direct joining of metal and plastic components without the need for adhesives or mechanical fasteners. The present work sees development of a modeling approach for conduction and transmission laser direct joining of these materials based on multi-layer optical propagation theory and numerical heat flow simulation. The scope of this methodology is to predict process outcomes based on the calculated joint interface and upper surface temperatures. Three representative cases are considered for model verification, including conduction joining of PBT and aluminum alloy, transmission joining of optically transparent PET and stainless steel, and transmission joining of semi-transparent PA 66 and stainless steel. Conduction direct laser joining experiments are performed on black PBT and 6082 anticorodal aluminum alloy, achieving shear loads of over 2000 N with specimens of 2 mm thickness and 25 mm width. Comparison with simulation results shows that consistently high strength is achieved where the peak interface temperature is above the plastic degradation temperature. Comparison of transmission joining simulations and published experimental results confirms these findings and highlights the influence of plastic layer optical absorption on process feasibility.

Infrared transient-liquid-phase joining of SCS-6/ β21S titanium matrix composite

NASA Astrophysics Data System (ADS)

Blue, Craig A.; Sikka, Vinod K.; Blue, Randall A.; Lin, Ray Y.

1996-12-01

Fiber-reinforced titanium matrix composites (TMCs) are among the advanced materials being considered for use in the aerospace industry due to their light weight, high strength, and high modulus. A rapid infrared joining process has been developed for the joining of composites and advanced materials. Rapid infrared joining has been shown not to have many of the problems associated with conventional joining methods. Two models were utilized to predict the joint evolution and fiber reaction zone growth. Titanium matrix composite, 16-ply SCS-6/ β21S, has been successfully joined with total processing times of approximately 2 minutes, utilizing the rapid infrared joining technique. The process utilizes a 50 °C/s ramping rate, 17- µm Ti-15Cu-15Ni wt pct filler material between the faying surfaces; a joining temperature of 1100 °C; and 120 seconds of time to join the composite material. Joint shear-strength testing of the rapid infrared joints at temperatures as high as 800 °C has revealed no joint failures. Also, due to the rapid cooling of the process, no poststabilization of the matrix material is necessary to prevent the formation of a brittle omega phase during subsequent use of the TMC at intermediate temperatures, 270 °C to 430 °C, for up to 20 hours.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perry, Marcia

The IRCD is an IRC server that was originally distributed by the IRCD Hybrid developer team for use as a server in IRC message over the public Internet. By supporting the IRC protocol defined in the IRC RFC, IRCD allows the users to create and join channels for group or one-to-one text-based instant messaging. It stores information about channels (e.g., whether it is public, secret, or invite-only, the topic set, membership) and users (who is online and what channels they are members of). It receives messages for a specific user or channel and forwards these messages to the targeted destination.more » Since server-to-server communication is also supported, these targeted destinations may be connected to different IRC servers. Messages are exchanged over TCP connections that remain open between the client and the server. The IRCD is being used within the Pervasive Computing Collaboration Environment (PCCE) as the 'chat server' for message exchange over public and private channels. After an LBNLSecureMessaging(PCCE chat) client has been authenticated, the client connects to IRCD with its assigned nickname or 'nick.' The client can then create or join channels for group discussions or one-to-one conversations. These channels can have an initial mode of public or invite-only and the mode may be changed after creation. If a channel is public, any one online can join the discussion; if a channel is invite-only, users can only join if existing members of the channel explicity invite them. Users can be invited to any type of channel and users may be members of multiple channels simultaneously. For use with the PCCE environment, the IRCD application (which was written in C) was ported to Linux and has been tested and installed under Linux Redhat 7.2. The source code was also modified with SSL so that all messages exchanged over the network are encrypted. This modified IRC server also verifies with an authentication server that the client is who he or she claims to be and that this user is authorized to ain access to the IRCD.« less

Facebook for Supporting a Lifestyle Intervention for People with Major Depressive Disorder, Bipolar Disorder, and Schizophrenia: an Exploratory Study.

PubMed

Naslund, John A; Aschbrenner, Kelly A; Marsch, Lisa A; McHugo, Gregory J; Bartels, Stephen J

2018-03-01

To examine whether Facebook could support a community-based group lifestyle intervention for adults with serious mental illness. Participants with serious mental illness and obesity enrolled in a 6-month group lifestyle program were invited to join a secret Facebook group to support their weight loss and physical activity goals. Two peer co-facilitators moderated the Facebook group. The proportion of participants who achieved ≥5% weight loss or improved fitness was measured at follow-up. The relationship between this outcome and participants' interactions in the Facebook group was examined. Interactions were defined as active contributions including posts, comments, or likes. Content of participants' Facebook posts was also explored. Participants (n = 25) had major depression (44%), bipolar disorder (36%), and schizophrenia (20%). Nineteen (76%) participants joined the Facebook group, and contributed 208 interactions (70 posts; 81 comments; 57 likes). Participants who achieved ≥5% weight loss or improved fitness contributed more interactions in the Facebook group (mean = 19.1; SD = 20.5) compared to participants who did not (mean = 3.9; SD = 6.7), though this relationship approached statistical significance (t = -2.1; Welch's df = 13.1; p = 0.06). Participants' posts containing personal sharing of successes or challenges to adopting healthy behaviors generated more interaction compared to posts containing program reminders (p < 0.01), motivational messages (p < 0.01), and healthy eating content (p < 0.01). Facebook appears promising for supporting health behavior change among people with serious mental illness. These findings can inform social media initiatives to scale up health promotion efforts targeting this at-risk group.

Are sectioning and soldering of short-span implant-supported prostheses necessary procedures?

PubMed

Bianchini, Marco A; Souza, João G O; Souza, Dircilene C; Magini, Ricardo S; Benfatti, Cesar A M; Cardoso, Antonio C

2011-01-01

The aim of this study was to evaluate the fit between dental abutments and the metal framework of a 3-unit fixed prosthesis screwed to two implants to determine whether sectioning and soldering of the framework are in fact necessary procedures. The study was based on a model of a metal framework of a 3-unit prosthesis screwed to two implants. A total of 18 metal frameworks were constructed and divided into 3 groups: (1) NS group - each framework was cast in one piece and not sectioned; (2) CS group - the components of each sectioned framework were joined by conventional soldering; and (3) LW group - the components of each sectioned framework were joined by laser welding. The control group consisted of six silver-palladium alloy copings that were not cast together. Two analyses were mperformed: in the first analysis, the framework was screwed only to the first abutment, and in the second analysis, the framework was screwed to both abutments. The prosthetic fit was assessed at a single point using a measuring microscope (Measurescope, Nikon, Japan) and the marginal gap was measured in micrometers. Statistical analysis was performed using analysis of variance (ANOVA), Scheffe's test, Student's t-test, and Mann-Whitney U test. The NS group had larger marginal gaps than the other groups (p<0.01), while the CS and LW groups had a similar degree of misfit with no significant difference between them. The results revealed that, in the case of short-span 3-unit fixed prostheses, the framework should be sectioned and soldered or welded to prevent or reduce marginal gaps between the metal framework and dental abutments.

The relationships within the Chaitophorinae and Drepanosiphinae (Hemiptera, Aphididae) inferred from molecular-based phylogeny and comprehensive morphological data

PubMed Central

Wieczorek, Karina; Lachowska-Cierlik, Dorota; Kajtoch, Łukasz; Kanturski, Mariusz

2017-01-01

The Chaitophorinae is a bionomically diverse Holarctic subfamily of Aphididae. The current classification includes two tribes: the Chaitophorini associated with deciduous trees and shrubs, and Siphini that feed on monocotyledonous plants. We present the first phylogenetic hypothesis for the subfamily, based on molecular and morphological datasets. Molecular analyses were based on the mitochondrial gene cytochrome oxidase subunit I (COI) and the nuclear gene elongation factor-1α (EF-1α). Phylogenetic inferences were obtained individually on each of genes and joined alignments using Bayesian inference (BI) and Maximum likelihood (ML). In phylogenetic trees reconstructed on the basis of nuclear and mitochondrial genes as well as a morphological dataset, the monophyly of Siphini and the genus Chaitophorus was supported. Periphyllus forms independent lineages from Chaitophorus and Siphini. Within this genus two clades comprising European and Asiatic species, respectively, were indicated. Concerning relationships within the subfamily, EF-1α and joined COI and EF-1α genes analysis strongly supports the hypothesis that Chaitophorini do not form a monophyletic clade. Periphyllus is a sister group to a clade containing Chaitophorus and Siphini. The Asiatic unit of Periphyllus also includes Trichaitophorus koyaensis. The analysis of morphological dataset under equally weighted parsimony also supports the view that Chaitophorini is an artificial taxon, as Lambersaphis pruinosae and Pseudopterocomma hughi, both traditionally included in the Chaitophorini, formed independent lineages. COI analyses support consistent groups within the subfamily, but relationships between groups are poorly resolved. These analyses were extended to include the species of closely related and phylogenetically unstudied subfamily Drepanosiphinae, which produced congruent results. Genera Drepanosiphum and Depanaphis are monophyletic and sister. The position of Yamatocallis tokyoensis differs in the molecular and morphological analyses, i.e. it is either an independent lineage (EF-1α, COI, joined COI and EF-1α genes) or is nested inside this unit (morphology). Our data also support separation of Chaitophorinae from Drepanosiphinae. PMID:28288166

Thermoplastic Joining and Assembly of Bulk Metallic Glass Composites Through Capacitive Discharge

NASA Technical Reports Server (NTRS)

Roberts, Scott N. (Inventor); Schramm, Joseph P. (Inventor); Hofmann, Douglas C. (Inventor); Johnson, William L. (Inventor); Kozachkov, Henry (Inventor); Demetriou, Marios D. (Inventor)

2015-01-01

Systems and methods for joining BMG Composites are disclosed. Specifically, the joining of BMG Composites is implemented so as to preserve the amorphicity of their matrix phase and the microstructure of their particulate phase. Implementation of the joining method with respect to the construction of modular cellular structures that comprise BMG Composites is also discussed.

Toroid Joining Gun. [thermoplastic welding system using induction heating

NASA Technical Reports Server (NTRS)

Buckley, J. D.; Fox, R. L.; Swaim, R J.

1985-01-01

The Toroid Joining Gun is a low cost, self-contained, portable low powered (100-400 watts) thermoplastic welding system developed at Langley Research Center for joining plastic and composite parts using an induction heating technique. The device developed for use in the fabrication of large space sructures (LSST Program) can be used in any atmosphere or in a vacuum. Components can be joined in situ, whether on earth or on a space platform. The expanded application of this welding gun is in the joining of thermoplastic composites, thermosetting composites, metals, and combinations of these materials. Its low-power requirements, light weight, rapid response, low cost, portability, and effective joining make it a candidate for solving many varied and unique bonding tasks.

Bioanalysis Young Investigator: Sadagopan Krishnan.

PubMed

Krishnan, Sadagopan

2011-05-01

Supervisor's supporting comments. I am pleased to recommend Sadagopan Krishnan for the Bioanalysis Young Investigator award. Sadagopan is a bright, creative and highly-motivated young bioanalytical chemist. His theses in our laboratory involved the development of electrochemiluminescent arrays for chemical toxicity screening utilizing cytochrome P450 metalloenzymes. He was senior author of a paper in Analytical Chemistry on this that was featured on the cover. He also investigated fundamental properties of human metabolic cytochrome P450s - research was carried out at his own initiative, and explains for the first time the role of iron spin state on enzyme electron transfer rates. He then developed thin films that mimic the natural cytochrome P450 redox cycle for the first time. He worked with several other group members to develop a superparamagnetic labeling scheme for immunosensing of proteins by surface plasmon resonance at unprecedented low levels, down to 10 fg/ml. Sadagopan has also demonstrated strong leadership skills. After his PhD, Sadagopan joined the group of Fraser Armstrong at Oxford University, UK, as a postdoctoral fellow. He is currently expanding his research horizons into the area of biofuel cells. His eventual goal is to join the faculty of a major university and build a world-class research group in bioanalytical chemistry.

A Review of Research Progress on Dissimilar Laser Weld-Brazing of Automotive Applications

NASA Astrophysics Data System (ADS)

Krishnaja, Devireddy; Cheepu, Muralimohan; Venkateswarlu, D.

2018-03-01

In recent years, a rapidly growing demand for laser brazing in the transportation industry for automotive parts joining to improve the productivity, quality of the joints and cost efficiency reasons. Due to this, laser brazing technology is extensively used in the major manufacturing companies such as Volkswagen group, General Motors Europe, BMW and Ford manufacturing groups as their openingbulk production solicitation on various parts of vehicles. Laser brazing is different from the welding processes and it will block upanopeningamongst two substrates by mixture of a filler wire on condition that by a concentrated laser beam or any other heat source. Among the all joining processes, laser brazing technique is an alternative and in effect method for welding of dissimilar metals which have large difference in their melting points. It is important to understand therelationsof these phenomena of the fillers of brazing with the substrate surfaces to obtain a high quality joints. The aim of this study is to address the contemporaryenquiriesand its progress on laser-brazing, its importance to the industrial applications and to bring more awareness to the manufacturers about the research results of this technique from various research groups to enhance the research progress and developing new things from this review report.

Welding and joining: A compilation

NASA Technical Reports Server (NTRS)

1975-01-01

A compilation is presented of NASA-developed technology in welding and joining. Topics discussed include welding equipment, techniques in welding, general bonding, joining techniques, and clamps and holding fixtures.

Laser microjoining of dissimilar and biocompatible materials

NASA Astrophysics Data System (ADS)

Bauer, Ingo; Russek, Ulrich A.; Herfurth, Hans J.; Witte, Reiner; Heinemann, Stefan; Newaz, Golam; Mian, A.; Georgiev, D.; Auner, Gregory W.

2004-07-01

Micro-joining and hermetic sealing of dissimilar and biocompatible materials is a critical issue for a broad spectrum of products such as micro-electronics, micro-optical and biomedical products and devices. Today, biocompatible titanium is widely applied as a material for orthopedic implants as well as for the encapsulation of implantable devices such as pacemakers, defibrillators, and neural stimulator devices. Laser joining is the process of choice to hermetically seal such devices. Laser joining is a contact-free process, therefore minimizing mechanical load on the parts to be joined and the controlled heat input decreases the potential for thermal damage to the highly sensitive components. Laser joining also offers flexibility, shorter processing time and higher quality. However, novel biomedical products, in particular implantable microsystems currently under development, pose new challenges to the assembly and packaging process based on the higher level of integration, the small size of the device's features, and the type of materials and material combinations. In addition to metals, devices will also include glass, ceramic and polymers as biocompatible building materials that must be reliably joined in similar and dissimilar combinations. Since adhesives often lack long-term stability or do not meet biocompatibility requirements, new joining techniques are needed to address these joining challenges. Localized laser joining provides promising developments in this area. This paper describes the latest achievements in micro-joining of metallic and non-metallic materials with laser radiation. The focus is on material combinations of metal-polymer, polymer-glass, metal-glass and metal-ceramic using CO2, Nd:YAG and diode laser radiation. The potential for applications in the biomedical sector will be demonstrated.

Ceramic-to-Metal Joining for High Temperature, High Pressure Heat Exchangers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mako, Frederick; Mako III, Frederick

2016-12-05

Designed and tested silicon carbide to metal joining and silicon carbide joining technology under high temperature and high pressure conditions. Determined that the joints maintained integrity and remained helium gas tight. These joined parts have been tested for mechanical strength, fracture toughness and hermeticity. A component testing chamber was designed and built and used for testing the joint integrity.

Smart Adsorbents with Photoregulated Molecular Gates for Both Selective Adsorption and Efficient Regeneration.

PubMed

Cheng, Lei; Jiang, Yao; Yan, Ni; Shan, Shu-Feng; Liu, Xiao-Qin; Sun, Lin-Bing

2016-09-07

Selective adsorption and efficient regeneration are two crucial issues for adsorption processes; unfortunately, only one of them instead of both is favored by traditional adsorbents with fixed pore orifices. Herein, we fabricated a new generation of smart adsorbents through grafting photoresponsive molecules, namely, 4-(3-triethoxysilylpropyl-ureido)azobenzene (AB-TPI), onto pore orifices of the support mesoporous silica. The azobenzene (AB) derivatives serve as the molecular gates of mesopores and are reversibly opened and closed upon light irradiation. Irradiation with visible light (450 nm) causes AB molecules to isomerize from cis to trans configuration, and the molecular gates are closed. It is easy for smaller adsorbates to enter while difficult for the larger ones, and the selective adsorption is consequently facilitated. Upon irradiation with UV light (365 nm), the AB molecules are transformed from trans to cis isomers, promoting the desorption of adsorbates due to the opened molecular gates. The present smart adsorbents can consequently benefit not only selective adsorption but also efficient desorption, which are exceedingly desirable for adsorptive separation but impossible for traditional adsorbents with fixed pore orifices.

Why eicosanoids could represent a new class of tocolytics on uterine activity in pregnant women.

PubMed

Corriveau, Stéphanie; Berthiaume, Maryse; Rousseau, Eric; Pasquier, Jean-Charles

2009-10-01

The purpose of this study was to assess the effects of exogenous eicosanoids on spontaneous uterine contractile activity. Eight uterine biopsies were performed from women who were undergoing elective cesarean delivery. Tension measurements were performed in vitro on myometrial strips. Contractile activities were quantified by the calculation of the area under the curve. The effects of eicosanoids and specific enzyme inhibitors were assessed. Fractions from various uterine tissues were analyzed by Western blot. Data demonstrate the presence, in some tested tissues, of cytochrome P-450 epoxygenase and soluble epoxide hydrolase, which respectively produce and degrade epoxyeicosatrienoic acid regioisomers. Inhibition of soluble epoxide hydrolase with 12-(3-adamantan-1-yl-ureido)-dodecanoic acid or omega-hydroxylase with N-methylsulfonyl-12,12-dibromododec-11-enamide resulted in a tocolytic effect; N-methylsulfonyl-6-[2-propargyloxyphenyl] hexanamide, which is an epoxygenase inhibitor, had no effect. Exogenous epoxyeicosatrienoic acids displayed significant tocolytic effects on spontaneous contractile activities. Epoxy- and hydroxyeicosanoids represent new bioactive, arachidonic acid by-products with in vitro tocolytic activities. These findings suggest that cytochrome P-450 isozymes may represent relevant pharmacologic targets under physiopathologic conditions.

Species-richness of the Anopheles annulipes Complex (Diptera: Culicidae) Revealed by Tree and Model-Based Allozyme Clustering Analyses

DTIC Science & Technology

2007-01-01

including tree- based methods such as the unweighted pair group method of analysis ( UPGMA ) and Neighbour-joining (NJ) (Saitou & Nei, 1987). By...based Bayesian approach and the tree-based UPGMA and NJ cluster- ing methods. The results obtained suggest that far more species occur in the An...unlikely that groups that differ by more than these levels are conspecific. Genetic distances were clustered using the UPGMA and NJ algorithms in MEGA

Dietrich Stauffer: Unconventional in Science and Life

NASA Astrophysics Data System (ADS)

Chowdhury, Debashish

Dietrich Stauffer (DS) was born in Bonn on 6th February, 1943. He was awarded the Ph.D. degree in Physics by the Technical University of Munich in 1970 for his thesis on phase transitions and superfluidity of helium. After doing postdoctoral research in USA over the next few years, on phase transitions [1], droplet model and nucleation [2], he returned to Germany to join Kurt Binder's group at the Saar State University, Saarbrücken. During this period the classic works of Binder and Stauffer on the cluster theory of nucleation were published [3]. He completed his “Habilitation” (required as eligibility for tenured professor positions in Germany) in Saarbrücken in 1975. Then, in 1977, he joined the faculty of the University of Cologne as an associate professor in the Institute of Theoretical Physics where he has remained ever since.

New local joining technique for metal materials using exothermic heat of Al/Ni multilayer powder

NASA Astrophysics Data System (ADS)

Izumi, Taisei; Kametani, Nagamasa; Miyake, Shugo; Kanetsuki, Shunsuke; Namazu, Takahiro

2018-06-01

The use of Al/Ni multilayer powders as a new heat source has been expected for metal joining technique owing to their instantaneous reaction and enormous amount of exothermic heat. In this study, the effects of the amount of Al/Ni multilayer powders on the electrical and mechanical properties of the joining part of Al strip specimens were examined. These electrical and mechanical properties were estimated by electric resistivity measurement using the four-terminal method and shear test, respectively. Experimental results show that Al specimens are successful joined under a limited condition and exhibit low electrical resistance and sufficiently high strength to maintain the joined state. However, overheating increases the amount of Al/Ni multilayer powder in the joined part, which causes considerable damage such as voids and dissolved loss. It is found that optimization of the amount of Al/Ni multilayer powder enables us to realize reliable joining of Al foils in electronics fields in the future.

CFRTP and stainless steel laser joining: Thermal defects analysis and joining parameters optimization

NASA Astrophysics Data System (ADS)

Jiao, Junke; Xu, Zifa; Wang, Qiang; Sheng, Liyuan; Zhang, Wenwu

2018-07-01

Experiments with different joining parameters were carried out on fiber laser welding system to explore the mechanism of CFRTP/stainless steel joining and the influence of the parameters on the joining quality. The thermal defect and the microstructure of the joint was tested by SEM, EDS. The joint strength and the thermal defect zone width was measured by the tensile tester and the laser confocal microscope, respectively. The influence of parameters such as the laser power, the joining speed and the clamper pressure on the stainless steel surface thermal defect and the joint strength was analyzed. The result showed that the thermal defect on the stainless steel surface would change metal's mechanical properties and reduce its service life. A chemical bonding was found between the CFRTP and the stainless steel besides the physical bonding and the mechanical bonding. The highest shear stress was obtained as the laser power, the joining speed and the clamper pressure is 280 W, 4 mm/s and 0.15 MPa, respectively.

Robust Joining and Assembly Technologies for Ceramic Matrix Composites: Technical Challenges and Opportunities

NASA Technical Reports Server (NTRS)

Mrityunjay, Singh; Gray, Hugh R. (Technical Monitor)

2002-01-01

Fiber reinforced ceramic matrix composites are under active consideration for use in a wide variety of high temperature applications within the aeronautics, energy, process, and nuclear industries. The engineering designs require fabrication and manufacturing of complex shaped parts. In many instances, it is more economical to build up complex shapes by Joining simple geometrical shapes. Thus, joining and attachment have been recognized as enabling technologies for successful utilization of ceramic components in various demanding applications. In this presentation, various challenges and opportunities in design, fabrication, and testing of high temperature joints in ceramic matrix composites will be presented. Various joint design philosophies and design issues in joining of composites will be discussed along with an affordable, robust ceramic joining technology (ARCJoinT). A wide variety of ceramic composites, in different shapes and sizes, have been joined using this technology. Microstructure and mechanical properties of joints will be reported. Current status of various ceramic joining technologies and future prospects for their applications will also be discussed.

Joining of aluminum sheet and glass fiber reinforced polymer using extruded pins

NASA Astrophysics Data System (ADS)

Conte, Romina; Buhl, Johannes; Ambrogio, Giuseppina; Bambach, Markus

2018-05-01

The present contribution proposes a new approach for joining sheet metal and fiber reinforced composites. The joining process draws upon a Friction Stir Forming (FSF) process, which is performed on the metal sheet to produce slender pins. These pins are used to pierce through the composite. Joining is complete by forming a locking head out of the part if the pin sticks out of the composite. Pins of different diameters and lengths were produced from EN AW-1050 material, which were joined to glass fiber reinforced polyamide-6. The strength of the joint has been experimentally tested in order to understand the effect of the process temperature on the pins strength and therefore on the joining. The results demonstrate the feasibility of this new technique, which uses no excess material.

Welding and Joining of Titanium Aluminides

PubMed Central

Cao, Jian; Qi, Junlei; Song, Xiaoguo; Feng, Jicai

2014-01-01

Welding and joining of titanium aluminides is the key to making them more attractive in industrial fields. The purpose of this review is to provide a comprehensive overview of recent progress in welding and joining of titanium aluminides, as well as to introduce current research and application. The possible methods available for titanium aluminides involve brazing, diffusion bonding, fusion welding, friction welding and reactive joining. Of the numerous methods, solid-state diffusion bonding and vacuum brazing have been most heavily investigated for producing reliable joints. The current state of understanding and development of every welding and joining method for titanium aluminides is addressed respectively. The focus is on the fundamental understanding of microstructure characteristics and processing–microstructure–property relationships in the welding and joining of titanium aluminides to themselves and to other materials. PMID:28788113

Construction of some hypergroups from combinatorial structures.

PubMed

Ashrafi, Ali Reza; Eslami-Harandi, Ahmad Reza

2003-01-01

Jajcay's studies (1993; 1994) on the automorphism groups of Cayley maps yielded a new product of groups, which he called, rotary product. Using this product, we define a hyperoperation [symbol: see text] on the group Syme(G), the stabilizer of the identity e [symbol: see text] G in the group Sym(G). We prove that (Syme(G), [symbol: see text]) is a hypergroup and characterize the subhypergroups of this hypergroup. Finally, we show that the set of all subhypergroups of Syme(G) constitute a lattice under ordinary join and meet and that the minimal elements of order two of this lattice is a subgroup of Aut(G).

Engaging in extreme activism in support of others’ political struggles: The role of politically motivated fusion with out-groups

PubMed Central

Boos, Beverly; Kimel, Sasha Y.; Obaidi, Milan; Shani, Maor; Thomsen, Lotte

2018-01-01

Humans are a coalitional, parochial species. Yet, extreme actions of solidarity are sometimes taken for distant or unrelated groups. What motivates people to become solidary with groups to which they do not belong originally? Here, we demonstrate that such distant solidarity can occur when the perceived treatment of an out-group clashes with one’s political beliefs (e.g., for Leftists, oppressive occupation of the out-group) and that it is driven by fusion (or a feeling of oneness) with distant others with whom one does not share any common social category such as nationality, ethnicity or religion. In Study 1, being politically Leftist predicted European-Americans’ willingness to engage in extreme protest on behalf of Palestinians, which was mediated by fusion with the out-group. Next, in Study 2, we examined whether this pattern was moderated by out-group type. Here, Norwegian Leftists fused more with Palestinians (i.e., a group that, in the Norwegian context, is perceived to be occupied in an asymmetrical conflict) rather than Kurds (i.e., a group for which this perception is less salient). In Study 3, we experimentally tested the underlying mechanism by framing the Kurdish conflict in terms of an asymmetrical occupation (vs. symmetrical war or control conditions) and found that this increased Leftist European-Americans’ fusion with Kurds. Finally, in Study 4, we used a unique sample of non-Kurdish aspiring foreign fighters who were in the process of joining the Kurdish militia YPG. Here, fusion with the out-group predicted a greater likelihood to join and support the Kurdish forces in their fight against ISIS, insofar as respondents experienced that their political orientation morally compelled them to do so (Study 4). Together, our findings suggest that politically motivated fusion with out-groups underpins the extreme solidary action people may take on behalf of distant out-groups. Implications for future theory and research are discussed. PMID:29304156

The difference is more than floating: factors affecting breast cancer survivors' decisions to join and maintain participation in dragon boat teams and support groups.

PubMed

McDonough, Meghan H; Patterson, Michelle C; Weisenbach, Beth B; Ullrich-French, Sarah; Sabiston, Catherine M

2018-03-09

Peer support can be helpful in rehabilitation from breast cancer, but participation in peer support groups is low. Groups that provide support opportunities in physical activity contexts are an attractive alternative for some survivors. This study examined survivors' reasons for joining and maintaining participation on a dragon boat team, along with perceptions of barriers and attractions to traditional peer support groups. Seventeen breast cancer survivors were interviewed on five occasions over their first two seasons of a newly formed dragon boating team to explore their perceptions of peer support groups and dragon boating. Data were inductively analyzed using thematic analysis. Categories surrounding physical, psychological, social and community features were identified with several themes emerging within each. Advantages of dragon boating included opportunities to get a combination of physical, psychosocial and community benefits; health improvement and behavior change; and obtaining social support without the focus being on cancer. Peer support groups were identified as having advantages for forming relationships and avoiding barriers associated with physical activity. While neither type of program meets all needs, practical considerations are identified for incorporating advantages of both programs to improve participation. Implications for rehabilitation Further understanding of perceptions, and attractions and challenges to taking part in group programs will inform development of accessible programs that target multiple rehabilitation needs. Physical activity can provide a positive, alternative focus that takes the emphasis off of cancer, which is more accessible to some survivors. Physical activity also provides opportunities to build relationships around a common, positive goal, which can be a foundation for providing support for coping with cancer.

[Theatre as communication method in psychogeriatric care: effects on behaviour, mood and quality of life of people with dementia ].

PubMed

van Dijk, A M; van Weert, J C M; Dröes, R M

2012-12-01

Recently, a new communication method was introduced in nursing homes for people with dementia. This so-called Veder Method, developed by professional actors with former educational background in care,combines proven effective emotion-oriented care methods, like reminiscence,with theatrical stimuli like songs and poetry. The method is applied during theatre shows and living room theatre activities. In this exploratory study the surplus value of a living room theatre activity according to the Veder method compared to a reminiscence group activity was evaluated. Within a quasi experimental design, three groups of nursing home residents with dementia were compared: Experimental group 1 (E1; N=64)joined a 'living room theatre activity' offered by trained caregivers. Experimental group 2 (E2; N=31) joined a 'living room theatre activity' offered by professional actors. The control group (N=52) received a reminiscence group activity. Behaviour, mood and quality of life were measured using standardized observation scales at three points in time: (T1) pretest; (T2)during the intervention and; (T3) posttest, two hours after the intervention. During and after the intervention, positive effects were found in favour of E2 on behaviour (i.e. laughing, recalled memories), mood (i.e. happy/content) and quality of life (i.e. social involvement, feeling at home). A living room theatre activity according to the Veder Method has more positive effect on nursing home residents compared to a normal reminiscence group activity, if offered by professional actors.This article is a slightly edited translation of Does theatre improve the quality of life of people with dementia? International Psychogeriatrics2012;24: 36r381 by the same authors.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rabin, B.H.

A simple modified tape casting procedure has been developed for application to ceramic joining when the joining materials are in powder form. The method involves preparation of a slurry from the powder, solvent, and thermoplastic binder, and then casting directly onto the joining surface using a moving doctor blade. Handling of the tape prior to joining is not necessary: therefore, binder content is minimized, plasticizers are not required, and viscosity is controlled by solvent content. The utility of this technique for producing joints with thin, uniform interlayers is demonstrated for silicon carbide materials joined with TiC + Ni and SiCmore » + Si.« less

How Teachers Can Conduct Historical Reenactments in Their Own Schools

ERIC Educational Resources Information Center

Morris, Ronald Vaughan

2008-01-01

A reenactment is the recreation of a scene, time period, or event as authentically as possible by a group of people. An educational reenactment takes the in-depth cultural experience of participating in a reenactment and joins it with the educational structure of a social studies classroom. Reenactments can be as varied as historical…

The Literary Changes: From the Book Room to the Discovery of American Literatures and NCTE

ERIC Educational Resources Information Center

Rodriguez, R. Joseph

2011-01-01

Using his own experiences as a reader, the author advocates for increased attention to diverse literatures. Since joining National Council of Teachers of English (NCTE) in 1997, the author has worked with members who include preservice, beginning, and experienced educators and scholars; they have formed committees and founded groups for…

Planting the Seeds of a New Agriculture: Living with the Land in Central America.

ERIC Educational Resources Information Center

Adriance, Jim

1995-01-01

Central America's macroeconomics, land tenure patterns, and population growth are forcing small-scale farmers to alternatives based on farmer-to-farmer teaching and farming in concert with the environment. Discusses major schools of thought that have fueled this phenomenon, and how extension services and isolated groups are joining to form a…

Pedagogical, Social and Technical Designs of a Blended Synchronous Learning Environment

ERIC Educational Resources Information Center

Wang, Qiyun; Huang, Changqin

2018-01-01

In this study, a blended synchronous learning environment (BSLE) was designed from pedagogical, social and technical perspectives. It was created for a group of master's students to attend lessons in the classroom and at the same time allow a few of them to join the identical sessions using video conferencing from different sites. The purpose of…

The Effects of Captions in Teenagers' Multimedia L2 Learning

ERIC Educational Resources Information Center

Lwo, Laurence; Lin, Michelle Chia-Tzu

2012-01-01

This study aims to explore the impact of different captions on second language (L2) learning in a computer-assisted multimedia context. A quasi-experimental design was adopted, and a total of thirty-two eighth graders selected from a junior high school joined the study. They were systematically assigned into four groups based on their proficiency…

Afghanistan: Post-Taliban Governance, Security, and U.S. Policy

DTIC Science & Technology

2010-07-21

presidency, but later joined Rabbani’s 5 A pharmaceutical plant in Sudan (Al Shifa... plant was strictly civilian in nature. 6 http://www.msnbc.msn.com/id/4540958. Afghanistan: Post-Taliban Governance, Security, and U.S. Policy...commercially profitable for China Metallurgical Group, includes construction of two coal-fired electric power plant (one of which will supply more

L2 Immersion in 3D Virtual Worlds: The Next Thing to Being There?

ERIC Educational Resources Information Center

Paillat, Edith

2014-01-01

Second Life is one of the many three-dimensional virtual environments accessible through a computer and a fast broadband connection. Thousands of participants connect to this platform to interact virtually with the world, join international communities of practice and, for some, role play groups. Unlike online role play games however, Second Life…

Parent Keys to Success in the Parent-School Partnership. Parent Leadership. PHP-c96

ERIC Educational Resources Information Center

PACER Center, 2004

2004-01-01

When individuals or groups join together to work toward a common goal, a partnership is formed. Successfully reaching the goal requires mutual cooperation and a sharing of responsibilities. While carried out in different ways, the principles used to satisfy personal and business partnerships are much the same. Parents are the child's first and…

More Boys Wanted in Upstate New York

ERIC Educational Resources Information Center

Robinson, Matt

2010-01-01

In spite of the popularity of TV shows like "American Idol" and "Glee," it can still be hard to convince boys that singing is cool. Therefore, choir directors who would like more boys to join their groups have their work cut out for them. Erin Belanger, music teacher at Stockbridge Valley central School in Munnsville, New York…

A Natural Playscape: Four Years Later

ERIC Educational Resources Information Center

Keeler, Rusty

2008-01-01

In 2004, the author had the pleasure of joining the staff of New Day Children's Center in Watertown, New York, and a huge group of community volunteers in building the center's playscape. This past summer, she was able to visit Watertown again so she went to check on the progress of the center's playscape. In this article, she shares several…

My Superintendent Cohort Asks: "What Is Going on Here?"

ERIC Educational Resources Information Center

Bent, Anthony J.

2009-01-01

After receiving training along with two dozen other superintendents, the author was fortunate to join a consult group of five superintendents in the Boston area who already knew one another. Though they came from districts that ranged from 1,400 students to one with more than 8,000, they quickly discovered that the protocol channeled their…

Planting People, Growing Justice: The Role of the New Social Justice Lawyer?

ERIC Educational Resources Information Center

Tyner, Artika Renee

2012-01-01

The process of social change draws upon the strength of many individuals to build a strong collective, develop a shared vision, exercise the power required to necessitate change, and join forces in solidarity. This study examined the role of one particular group in this process, lawyers, by identifying their leadership characteristics and…

ASHA SLPs in China Teach Teachers about Their Students with Disabilities

ERIC Educational Resources Information Center

Cheng, Li-Rong Lilly; Wallach, Geraldine P.; Reed, Vicki A.

2015-01-01

The purpose of this article is to share a multicultural experience that took place in Guangzhou, China. The authors of this article joined a group of speech-language pathologists and audiologists to provide a training program for teachers and special education teachers in Guangzhou. It is our hope that this life changing experience will spark…

DOE Office of Scientific and Technical Information (OSTI.GOV)

David, S.A.; Goodwin, G.M.; Gardner, K.

This document contains a listing of the written scientific information originating in the Materials Joining (formerly the Welding and Brazing Group), Metals and Ceramics Division, Oak Ridge National Laboratory during 1951 through June 1989. This registry of documents is as much as possible, in the order of issue date. A complete cross-referenced listing of the technical literature of the Metals and Ceramics Division is also available.

Scientists at Play in a Field of the Lord

ERIC Educational Resources Information Center

Long, David E.

2010-01-01

The Answers in Genesis Creation Museum opened in May of 2007. During the opening day, a loosely affiliated group of scientists joined in a Rally for Reason as they termed it to protest the museum's potential effect on science in the United States. This paper discusses ethnographic data collected before and during the rally. Scientist narratives…

Europe’s New Defense Ambitions: Implications for NATO, the US, and Russia

DTIC Science & Technology

2000-04-01

of Moscow’s current constructive attitude is equally unlikely, because its economic and trade ties with the EU region are too valuable for Russia to...19. The Spanish Construcciones Aeronáuticas S. A. (CASA) aerospace group joined the EADS in December 1999. EADS now controls 80 per cent of the

Joining Together or Pushing Apart? Building Relationships and Exploring Difference through Shared Education in Northern Ireland

ERIC Educational Resources Information Center

Loader, Rebecca; Hughes, Joanne

2017-01-01

In divided societies, the promotion of cross-cultural contact through the education system has been central to efforts to improve intergroup relations. This approach is informed by an understanding of the contact hypothesis, which suggests that positive contact with a member of a different group should contribute to improvements in attitudes…

Joined against Pain and Gathered in Hope: The Role of Hokies United

ERIC Educational Resources Information Center

Schneiter, Steven R.; MacEachran, Brianne

2008-01-01

After April 16, 2007, Hokies United needed to heal itself and the Virginia Tech community. "About Campus" editorial assistant Brianne MacEachran interviewed Steve Schneiter, a faculty co-creator of the campus group that has organized responses to tragedies since the events of September 11, 2001, about managing suffering, this time their own.…

Special Topic/Learning Together, Living Together

ERIC Educational Resources Information Center

Carter, Gene R.

2007-01-01

The Executive Director of ASCD joins a group of U.S. educators traveling to Israel on an education mission sponsored by the America-Israel Friendship League. The educators visit the Gesher al Hawadi school, which was established by the Hand in Hand Center for Jewish-Arab Education in Israel. Located in an Arab town, the school has equal numbers of…

"Do I Beat 'Em or Join 'Em?" Individual and Collective Adaptations Leading to School Success among Minority Group Students in Australia.

ERIC Educational Resources Information Center

Munns, Geoff; McFadden, Mark; Simpson, Lee; Faulkner, Karen

A symposium compared the nature and experiences of schooling for Aboriginal Australians and Vietnamese immigrants to Australia. An introduction draws on John Ogbu's distinction between voluntary and involuntary minorities, provides background on the situations of indigenous peoples and Vietnamese immigrants in Australia, and suggests that cultural…

Why Teachers Must Join the Fight for Public Education. Now.

ERIC Educational Resources Information Center

Weinraub, Anissa

2013-01-01

The author, a teacher-activist with Teacher Action Group-Philadelphia (TAG), presents her views on the need for teachers to get involved in the battle for public education. She expresses her concerns about the political games being played to advance a neoliberal agenda that seeks to dispossess students of their right to a quality education and…

Cooperation with Commodity Groups and Hands-On Demonstrations Improve the Effectiveness of Commodity-Focused Educational Programs

ERIC Educational Resources Information Center

Kandel, Herman J.; Ransom, Joel K.; Torgerson, David A.; Wiersma, Jochum J.

2010-01-01

Wheat and soybean producers pay a small amount per bushel produced as a check-off. Funds are used for research, outreach, and crop promotion. Commodity organizations and Extension joined forces to develop multi-state educational outreach on spring wheat and soybean production. Participatory planning involved producers in developing these…

How to Plug into Teleconferencing/Reach Out and Train Somebody.

ERIC Educational Resources Information Center

Jenkins, Thomas M.; Cushing, David

1983-01-01

Teleconferencing, as an interactive group communication through an electronic medium joining three or more people at two or more locations, can take one of three forms: audio, audiographic, or full-motion video. This multilocation technology is used in training and in conducting meetings and conferences; it works as a money- and time-saving tool.…

Education and Liberation

ERIC Educational Resources Information Center

Austin, David

2009-01-01

Drawing on his personal experience as a university student in the 1990s as well as those of a little-known 1960s Montreal-based group, the Caribbean Conference Committee, Austin calls for a return of community education and to the idea that education has meaning and value on its own term. He argues that the joining of theory with practice…

Becoming Cruel: Appetitive Aggression Released by Detrimental Socialisation in Former Congolese Soldiers

ERIC Educational Resources Information Center

Weierstall, Roland; Haer, Roos; Banholzer, Lilli; Elbert, Thomas

2013-01-01

Appetitive aggression--a rewarding perception of the perpetration of violence--seems to be an adaptation common to adverse conditions. Children raised within armed groups may develop attitudes and values that favour harming others when socialized within a combat force. Combatants who joined an armed force early in their lives should, therefore,…

In vitro and in vivo metabolism of N-adamantyl substituted urea-based soluble epoxide hydrolase inhibitors.

PubMed

Liu, Jun-Yan; Tsai, Hsing-Ju; Morisseau, Christophe; Lango, Jozsef; Hwang, Sung Hee; Watanabe, Takaho; Kim, In-Hae; Hammock, Bruce D

2015-12-15

N,N'-disubstituted urea-based soluble epoxide hydrolase (sEH) inhibitors are promising therapeutics for hypertension, inflammation, and pain in multiple animal models. The drug absorption and pharmacological efficacy of these inhibitors have been reported extensively. However, the drug metabolism of these inhibitors is not well described. Here we reported the metabolic profile and associated biochemical studies of an N-adamantyl urea-based sEH inhibitor 1-adamantan-1-yl-3-(5-(2-(2-ethoxyethoxy)ethoxy)pentyl)urea (AEPU) in vitro and in vivo. The metabolites of AEPU were identified by interpretation of liquid chromatography-mass spectrometry (LC-MS), liquid chromatography-tandem mass spectrometry (LC-MS/MS) and/or NMR. In vitro, AEPU had three major positions for phase I metabolism including oxidations on the adamantyl moiety, urea nitrogen atoms, and cleavage of the polyethylene glycol chain. In a rodent model, the metabolites from the hydroxylation on the adamantyl group and nitrogen atom were existed in blood while the metabolites from cleavage of polyethylene glycol chain were not found in urine. The major metabolite found in rodent urine was 3-(3-adamantyl-ureido)-propanoic acid, a presumably from cleavage and oxidation of the polyethylene glycol moiety. All the metabolites found were active but less potent than AEPU at inhibiting human sEH. Furthermore, cytochrome P450 (CYP) 3A4 was found to be a major enzyme mediating AEPU metabolism. In conclusion, the metabolism of AEPU resulted from oxidation by CYP could be shared with other N-adamantyl-urea-based compounds. These findings suggest possible therapeutic roles for AEPU and new strategies for drug design in this series of possible drugs. Copyright © 2015 Elsevier Inc. All rights reserved.

Two-as-one monolateral dual kidney transplantation.

PubMed

Veroux, Pierfrancesco; Giuffrida, Giuseppe; Cappellani, Alessandro; Caglià, Pietro; Palmucci, Stefano; Sorbello, Massimiliano; Puzzo, Lidia; Veroux, Massimiliano

2011-01-01

Dual kidney transplantation (DKT) of marginal kidneys could offer transplant candidates a very satisfactory kidney transplantation in terms of renal function. However, DKT might be considered a major surgical procedure and, in older recipients, has a potentially greater risk of surgical complications compared with single kidney transplantation. Because of these findings, some transplant centers have replaced the classic bilateral placement of 2 kidneys with the monolateral placement of both kidneys. In a group of 35 DKTs performed during a 5-year period, we applied a new technique of monolateral placement of DKT in 10 recipients. In these 10 patients, the arteries and veins of the 2 kidneys were joined through a running suture, and the joined kidneys were anastomosed into the external iliac vessels in the recipient. The delayed graft function rate was 20%. No surgical complications developed in the entire series. One patient experienced late rejection with ureteral stricture. The graft and patient survival rate at a median follow-up of 30 months was 90%. To reduce the surgical risk and morbidity rate, the monolateral placement of both kidneys seems the safest method to perform DKT. The joined monolateral DKT, by reducing the cold ischemia time and the surgical trauma, could represent a step forward in the delicate treatment of these patients. Copyright © 2011 Elsevier Inc. All rights reserved.

Joining of dissimilar materials

DOEpatents

Tucker, Michael C; Lau, Grace Y; Jacobson, Craig P

2012-10-16

A method of joining dissimilar materials having different ductility, involves two principal steps: Decoration of the more ductile material's surface with particles of a less ductile material to produce a composite; and, sinter-bonding the composite produced to a joining member of a less ductile material. The joining method is suitable for joining dissimilar materials that are chemically inert towards each other (e.g., metal and ceramic), while resulting in a strong bond with a sharp interface between the two materials. The joining materials may differ greatly in form or particle size. The method is applicable to various types of materials including ceramic, metal, glass, glass-ceramic, polymer, cermet, semiconductor, etc., and the materials can be in various geometrical forms, such as powders, fibers, or bulk bodies (foil, wire, plate, etc.). Composites and devices with a decorated/sintered interface are also provided.

Numerical modelling in friction lap joining of aluminium alloy and carbon-fiber-reinforced-plastic sheets

NASA Astrophysics Data System (ADS)

Das, A.; Bang, H. S.; Bang, H. S.

2018-05-01

Multi-material combinations of aluminium alloy and carbon-fiber-reinforced-plastics (CFRP) have gained attention in automotive and aerospace industries to enhance fuel efficiency and strength-to-weight ratio of components. Various limitations of laser beam welding, adhesive bonding and mechanical fasteners make these processes inefficient to join metal and CFRP sheets. Friction lap joining is an alternative choice for the same. Comprehensive studies in friction lap joining of aluminium to CFRP sheets are essential and scare in the literature. The present work reports a combined theoretical and experimental study in joining of AA5052 and CFRP sheets using friction lap joining process. A three-dimensional finite element based heat transfer model is developed to compute the temperature fields and thermal cycles. The computed results are validated extensively with the corresponding experimentally measured results.

Experiences and Perceptions of Gay and Bisexual Fraternity Members From 1960 to 2007: A Cohort Analysis

ERIC Educational Resources Information Center

Rankin, Susan R.; Hesp, Grahaeme A.; Weber, Genevieve N.

2013-01-01

The study included 337 self-identified gay and bisexual fraternity members, with 170 joining their chapters in the year 2000 or after, 99 joining their chapters between the years 1990 and 1999, and 68 joining in the year 1989 or before. Participants who self-identified as gay or bisexual men and who joined in the year 2000 or after reported a more…

Willmore energy for joining of carbon nanostructures

NASA Astrophysics Data System (ADS)

Sripaturad, P.; Alshammari, N. A.; Thamwattana, N.; McCoy, J. A.; Baowan, D.

2018-06-01

Numerous types of carbon nanostructure have been found experimentally, including nanotubes, fullerenes and nanocones. These structures have applications in various nanoscale devices and the joining of these structures may lead to further new configurations with more remarkable properties and applications. The join profile between different carbon nanostructures in a symmetric configuration may be modelled using the calculus of variations. In previous studies, carbon nanostructures were assumed to deform according to perfect elasticity, thus the elastic energy, depending only on the axial curvature, was used to determine the join profile consisting of a finite number of discrete bonds. However, one could argue that the relevant energy should also involve the rotational curvature, especially when its size is comparable to the axial curvature. In this paper, we use the Willmore energy, a natural generalisation of the elastic energy that depends on both the axial and rotational curvatures. Catenoids are absolute minimisers of this energy and pieces of these may be used to join various nanostructures. We focus on the cases of joining a fullerene to a nanotube and joining two fullerenes along a common axis. By comparing our results with the earlier work, we find that both energies give similar joining profiles. Further work on other configurations may reveal which energy provides a better model.

Front-line perspectives on 'joined-up' working relationships: a qualitative study of social prescribing in the west of Scotland.

PubMed

White, Jane M; Cornish, Flora; Kerr, Susan

2017-01-01

Cross-sector collaboration has been promoted by government policies in the United Kingdom and many western welfare states for decades. Literature on joint working has focused predominantly on the strategic level, neglecting the role of individual practitioners in putting 'joined-up working' into practice. This paper takes the case of 'social prescribing' in the west of Scotland as an instance of joined-up working, in which primary healthcare professionals are encouraged to refer patients to non-medical sources of support in the third sector. This study draws on social capital theory to analyse the quality of the relationships between primary healthcare professionals and third sector practitioners. Eighteen health professionals and 15 representatives of third sector organisations participated in a qualitative interview study. Significant barriers to collaborative working were evident. The two stakeholder groups expressed different understandings of health, with few primary healthcare professionals considering non-medical sources of support to be useful or relevant. Health professionals were mistrustful of unknown third sector organisations, and concerned about their accountability for referrals that were not successful or positive for the patient. Third sector practitioners sought to build trust through face-to-face interactions with health professionals. However, primary healthcare professionals and third sector practitioners were not connected in effective networks. We highlight the ongoing imbalance of power between primary healthcare professionals and third sector organisations. Strategic collaborations should be complemented by efforts to build shared understandings, trust and connections between the diverse front-line workers whose mutual co-operation is necessary to achieve effective joined-up working. © 2015 John Wiley & Sons Ltd.

Genetic affinity between diverse ethnoreligious communities of Tamil Nadu, India: a microsatellite study.

PubMed

Eaaswarkhanth, M; Vasulu, T S; Haque, Ikramul

2008-12-01

Historically, a number of local Hindu caste groups have converted to Islam and formed religious endogamous groups. Therefore the local caste groups and religious communities in a region are expected to show genetic relatedness. In this study we investigate the genetic relationship between Tamil-speaking (Dravidian language) Muslims (Sunni), six endogamous Hindu castes, and a tribal ethnic group (Irulars) using 13 CODIS (Combined DNA Index System) autosomal microsatellite markers. Muslims show the highest average heterozygosity (0.405) compared to the other groups. The neighbor-joining tree and the multidimensional-scaling plot show clustering of Tamil-speaking Muslims with three caste groups (Gounder, Paraiyar, and Vanniyar), whereas the Irular tribe is separated out of the cluster.

Aerodynamic and structural studies of joined-wing aircraft

NASA Technical Reports Server (NTRS)

Kroo, Ilan; Smith, Stephen; Gallman, John

1991-01-01

A method for rapidly evaluating the structural and aerodynamic characteristics of joined-wing aircraft was developed and used to study the fundamental advantages attributed to this concept. The technique involves a rapid turnaround aerodynamic analysis method for computing minimum trimmed drag combined with a simple structural optimization. A variety of joined-wing designs are compared on the basis of trimmed drag, structural weight, and, finally, trimmed drag with fixed structural weight. The range of joined-wing design parameters resulting in best cruise performance is identified. Structural weight savings and net drag reductions are predicted for certain joined-wing configurations compared with conventional cantilever-wing configurations.

Friction stir lap joining of automotive aluminium alloy and carbon-fiber-reinforced plastic

NASA Astrophysics Data System (ADS)

Bang, H. S.; Das, A.; Lee, S.; Bang, H. S.

2018-05-01

Multi-material combination such as aluminium alloys and carbon-fiber-reinforced plastics (CFRP) are increasingly used in the aircraft and automobile industries to enhance strength-to-weight ratio of the respective parts and components. Various processes such as adhesive bonding, mechanical fasteners and laser beam joining were employed to join metal alloy and CFRP sheets. However, long processing time of adhesive bonding, extra weight induced by mechanical fasteners and high operating cost of the laser is major limitations of these processes. Therefore, friction stir welding is an alternative choice to overcome those limitations in joining of CFRP and aluminium alloys. In the present work, an attempt is undertaken to join AA5052 alloy and polyamide 66 CFRP sheets by friction stir lap joining technique using pinned and pin-less tools. The joint qualities are investigated extensively at different joining conditions using two different types of tools and surface ground aluminium sheets. The results show that pin-less tool and surface ground aluminium alloy can provide the suitable joint with maximum joint strength around 8 MPa.

A Review of Similar and Dissimilar Micro-joining of Nitinol

NASA Astrophysics Data System (ADS)

Deepan Bharathi Kannan, T.; Ramesh, T.; Sathiya, P.

2016-04-01

NiTinol belongs to a class of smart materials which has a wide range of applications in the field of automotive, aerospace, biomedical, robotics, etc., owing to the growing trend in miniaturization of components. Micro-joining is becoming one of the important and familiar processes in the fabrication of miniaturized components. Recently, effective micro-joining of thin sheets has been gaining a lot of interest among researchers. In this article, the research and progress in micro-joining of NiTinol to itself and other metals are reviewed at different aspects. To date, laser welding, tungsten inert gas welding, and resistance welding have been used to a large extent in investigating the weldability of NiTinol alloys. Some important welding parameters used in micro joining by various researchers and their effects on weld qualities are detailed in this review. Metallurgical aspects, mechanical properties and corrosion aspects of micro-joined NiTinol sheets/wires are discussed. The aim of this report is to review the recent progress in micro-joining of NiTinol and to provide a basis for follow-on research.

Realising their potential? Exploring interprofessional perceptions and potential of the advanced practitioner role: a qualitative analysis

PubMed Central

Powell, Tom; Watkins, Dianne; Kelly, Daniel

2015-01-01

Objectives To explore perceptions of the current practice and future potential of advanced practitioners (APs) from the perspectives of different professional groups in Wales UK. Design A qualitative study consisting of nine focus group interviews. Methods Initially verbatim transcriptions of each focus group interviews were analysed thematically before themes were merged to represent perceptions for the whole data set. Participants Data were gathered from a total of 67 stakeholders—including APs from a variety of professional groups (eg, nursing, physiotherapy, paramedics) as well as managers, workforce developers, educators and medical staff who have a role developing and supporting APs in practice. Results The results are presented in four themes: (1) demand, policy context and future priorities, (2) role clarity and standardisation, (3) agreement and understanding of the role and (4) interprofessional working. The context within which current and future AP roles were considered was influenced by inexorable demands for healthcare and the requirements to meet health policy priorities. Developing AP roles were hampered currently by a lack of shared understanding and ‘joined-up’ working between different groups such as medical practitioners, managers, commissioners and educators. Conclusions For the AP role to flourish more ‘joined-up’ thinking, support and development opportunities are required between APs, managers, senior clinicians, commissioners and educators. Working together to plan and deliver education, innovation and service delivery is of prime importance to meeting ever increasing complex health needs. This will ensure that future APs are adequately prepared and supported to reach their full potential and help deliver necessary innovations in current models of care delivery. PMID:26656024

Enabling Dissimilar Material Joining Using Friction Stir Scribe Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hovanski, Yuri; Upadyay, Piyush; Kleinbaum, Sarah

2017-04-05

One challenge in adapting welding processes to dissimilar material joining is the diversity of melting temperatures of the different materials. Although the use of mechanical fasteners and adhesives have mostly paved the way for near-term implementation of dissimilar material systems, these processes only accentuate the need for low-cost welding processes capable of joining dissimilar material components regardless of alloy, properties, or melting temperature. Friction stir scribe technology was developed to overcome the challenges of joining dissimilar material components where melting temperatures vary greatly, and properties and/or chemistry are not compatible with more traditional welding processes. Although the friction stir scribemore » process is capable of joining dissimilar metals and metal/polymer systems, a more detailed evaluation of several aluminum/steel joints is presented herein to demonstrate the ability to both chemically and mechanically join dissimilar materials.« less

Enabling Dissimilar Material Joining Using Friction Stir Scribe Technology

DOE PAGES

Hovanski, Yuri; Upadyay, Piyush; Kleinbaum, Sarah; ...

2017-04-05

One challenge in adapting welding processes to dissimilar material joining is the diversity of melting temperatures of the different materials. Although the use of mechanical fasteners and adhesives have mostly paved the way for near-term implementation of dissimilar material systems, these processes only accentuate the need for low-cost welding processes capable of impartially joining dissimilar material components regardless of alloy, properties, or melting temperature. Friction stir scribe technology was developed to overcome the challenges of joining dissimilar material components where melting temperatures vary greatly, and properties and/or chemistry are not compatible with more traditional welding processes. Finally, although the frictionmore » stir scribe process is capable of joining dissimilar metals and metal/polymer systems, a more detailed evaluation of several aluminum/steel joints is presented herein to demonstrate the ability to both chemically and mechanically join dissimilar materials.« less

Design synthesis and optimization of joined-wing transports

NASA Technical Reports Server (NTRS)

Gallman, John W.; Smith, Stephen C.; Kroo, Ilan M.

1990-01-01

A computer program for aircraft synthesis using a numerical optimizer was developed to study the application of the joined-wing configuration to transport aircraft. The structural design algorithm included the effects of secondary bending moments to investigate the possibility of tail buckling and to design joined wings resistant to buckling. The structural weight computed using this method was combined with a statistically-based method to obtain realistic estimates of total lifting surface weight and aircraft empty weight. A variety of 'optimum' joined-wing and conventional aircraft designs were compared on the basis of direct operating cost, gross weight, and cruise drag. The most promising joined-wing designs were found to have a joint location at about 70 percent of the wing semispan. The optimum joined-wing transport is shown to save 1.7 percent in direct operating cost and 11 percent in drag for a 2000 nautical mile transport mission.

Cognitive dissonance in groups: the consequences of disagreement.

PubMed

Matz, David C; Wood, Wendy

2005-01-01

As L. Festinger (1957) argued, the social group is a source of cognitive dissonance as well as a vehicle for reducing it. That is, disagreement from others in a group generates dissonance, and subsequent movement toward group consensus reduces this negative tension. The authors conducted 3 studies to demonstrate group-induced dissonance. In the first, students in a group with others who ostensibly disagreed with them experienced greater dissonance discomfort than those in a group with others who agreed. Study 2 demonstrated that standard moderators of dissonance in past research--lack of choice and opportunity to self-affirm, similarly reduced dissonance discomfort generated by group disagreement. In Study 3, the dissonance induced by group disagreement was reduced through a variety of interpersonal strategies to achieve consensus, including persuading others, changing one's own position, and joining an attitudinally congenial group.

Mark Miller, PhD | Division of Cancer Prevention

Cancer.gov

Dr. Mark Miller joined DCP's Chemopreventive Agent Development Research Group from the Wake Forest School of Medicine, where he was a Professor in the Department of Cancer Biology and Director of Graduate Studies. Prior to that, he was an Assistant Professor in the Department of Pathology at the University of Tennessee in Knoxville. He worked for NCI as a Senior Staff Fellow

Ethnic variation in environmental belief and behavior: An examination of the new ecological paradigm in a social psychological context

Treesearch

Cassandra Y. Johnson; J. Michael Bowker; H. Ken Cordell

2004-01-01

We use national-level data to test a modified version of Stern, Dietz, & Guagnano's causal model of environmental belief and behavior. We focus on ethnic variation for four environmental behaviors: environmental reading, household recycling, environmental group joining, and participation in nature-based outdoor recreation. Blacks and foreign-born Latinos were...

A Personalised Needs-Led Group Approach to Induction: Perceptions of Early Academics in a University School of Education

ERIC Educational Resources Information Center

Jarvis, Joy; Dickerson, Claire; Chivers, Leo; Collins, Chris; Lee, Libby; Levy, Roger; Solly, Dianne

2012-01-01

Members of staff joining a school of education often have extensive experience in practice but not in academia and the university setting may present a complex diversity of roles, ways of working, values and goals. Colleagues may face issues of understanding the organisational structure and culture, changing identities, and concerns about their…

My Long Journey from Suffering to Life

ERIC Educational Resources Information Center

Deng, Santino Atem

2006-01-01

Santino Atem Deng, one of the '"lost" boys from Sudan, recounts his story of trauma and resilience, when as a nine-year-old, he fled from the civil war in his home country of southern Sudan. Separated from his parents, he joined a group of adults who were able to take care of him and other young people as they journeyed to Ethiopia. Deng…

Afghanistan: Post-Taliban Governance, Security, and U.S. Policy

DTIC Science & Technology

2010-06-25

during his 1992-96 presidency, but later joined Rabbani’s 5 A pharmaceutical plant in...assertions that the plant was strictly civilian in nature. 6 http://www.msnbc.msn.com/id/4540958. Afghanistan: Post-Taliban Governance, Security, and...profitable for China Metallurgical Group, includes construction of two coal-fired electric power plant (one of which will supply more electricity to

Afghanistan: Post-Taliban Governance, Security, and U.S. Policy

DTIC Science & Technology

2010-06-07

but later joined Rabbani’s 5 A pharmaceutical plant in Sudan (Al Shifa) believe to be...producing chemical weapons for Al Qaeda also was struck that day, although U.S. reviews later corroborated Sudan’s assertions that the plant was...commercially profitable for China Metallurgical Group, includes construction of two coal-fired electric power plant (one of which will supply more electricity

Learning Curve: How College Graduates Solve Information Problems Once They Join the Workplace. Project Information Literacy Research Report

ERIC Educational Resources Information Center

Head, Allison J.

2012-01-01

Qualitative findings about the information-seeking behavior of today's college graduates as they transition from the campus to the workplace. Included are findings from interviews with 23 US employers and focus groups with 33 recent graduates from four US colleges and universities, conducted as an exploratory study for Project Information…

Learning How to Feel: Conversion Narratives and Community Membership in First-Year Composition

ERIC Educational Resources Information Center

Kurtyka, Faith M.

2017-01-01

This article examines the rhetoric of the conversion narratives told by a group of women joining a new social sorority on campus. I argue that these sorority conversion narratives are of interest to composition scholars because they document the emotional work involved in entering a community in one's first year of college. My close analysis of…

76 FR 64372 - Endangered and Threatened Wildlife and Plants; Draft Revised Recovery Plan, First Revision, for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... information into the recovery program. These two species are very similar in ecology. Lost River and shortnose... populations prior to listing (53 FR 27130; July 18, 1988). Although the rate of habitat loss has slowed in... survival is also low in these populations. The last time a substantial group of juveniles joined the adult...

The Passionate Educators: Voluntary Associations and the Struggle for Control of Adult Educational Broadcasting in Canada 1919-52.

ERIC Educational Resources Information Center

Faris, Ron

The Canadian Association for Adult Education (CAAE) is examined during the three historic phases of prewar depression, wartime, and postwar recovery. Social movement groups of a rural and populist nature and traditional voluntary associations encompassing an urban and elitist point of view joined to form the CAAE in 1935, and their conflicting…

77 FR 60118 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

..., Illinois; to join the existing Kirschner Family Control Group by acquiring voting shares of Town and... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C...

77 FR 12057 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-28

... Hodgson, all of Charlevoix, Michigan; to join the existing Hodgson control group and to retain and acquire... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C...

78 FR 23934 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-23

..., Monticello, Iowa, and Sarah Jones, Dyer, Indiana, to join the Audrey G. Savage Family Control group and... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C...

78 FR 34384 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-07

... Johnson Bank as trustee, both of Racine, Wisconsin; to join the existing Johnson Family Control Group and... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C...

Students' Perspectives on the Design and Implementation of a Blended Synchronous Learning Environment

ERIC Educational Resources Information Center

Wang, Qiyun; Huang, Changquin; Quek, Choon Lang

2018-01-01

This study investigated a blended synchronous learning environment (BSLE), which was designed for a group of master's students taking a course at a teacher education institute. The BSLE was created for the majority of the students to attend the course face-to-face and at the same time allowed the rest to join the identical sessions using…

Website on Protein Interaction and Protein Structure Related Work

NASA Technical Reports Server (NTRS)

Samanta, Manoj; Liang, Shoudan; Biegel, Bryan (Technical Monitor)

2003-01-01

In today's world, three seemingly diverse fields - computer information technology, nanotechnology and biotechnology are joining forces to enlarge our scientific knowledge and solve complex technological problems. Our group is dedicated to conduct theoretical research exploring the challenges in this area. The major areas of research include: 1) Yeast Protein Interactions; 2) Protein Structures; and 3) Current Transport through Small Molecules.

Air Force Special Operations Command > Home > POTFF

Science.gov Websites

Air Force Special Operations Command Air Force Special Operations Command Join the Air Force Home Sheets AFSOC Senior Leaders AFSOC Heritage Units 1st Special Operations Wing 24th Special Operations Wing 27th Special Operations Wing 352nd Special Operations Wing 353rd Special Operations Group 492nd Special

School Sport, Ethnicity and Nationality: Dimensions of Male Youth Culture in an Inner-City School.

ERIC Educational Resources Information Center

Walker, J. C.

1987-01-01

A portion of a five-year ethnographic study on the relationship between youth cultures, attitudes toward school, and the transition from school focuses on the significance of rugby football in the formation of a youth culture hierarchy among ethnic groups. School staff efforts to change the hierarchy by joining it are discussed. (MSE)

JPRS Report, Soviet Union, International Affairs.

DTIC Science & Technology

1988-11-23

reequipment and reconstruction of produc- tion, scientific research , experimental design and other work, these funds can also be used for other purposes...electronics enterprises in that association, which are joined together in 28 research centers and groups , develop new products and engage in marketing and...philosophical sciences, senior research fellow of the USSR Academy of Sciences International Workers Movement Institute: "Noncapitalist Development: Vis- tas

Integrated Conceptual Design of Joined-Wing SensorCraft Using Response Surface Models

DTIC Science & Technology

2006-11-01

vi Acknowledgements I would like to express my sincere appreciation to my thesis advisor, Dr. Robert Canfield for his guidance and...55 Raymer Approximate and Group Weights Sizing Methods....................................... 57 Finite Element Model Structural Weight...Empty Weight Fraction Equation ............................... 54 Figure 29 Response of Refined Weight to T/W and W/S Inputs for Model (2) Raymer ASW

Progress in far-infrared spectroscopy: Approximately 1890 to 1970

NASA Astrophysics Data System (ADS)

Mitsuishi, Akiyoshi

2014-03-01

The history of far-infrared spectroscopy from its beginning to around 1970 is reviewed. Before World War II, the size of the community investigating this topic was limited. During this period, in particular before 1925, about 90% of the papers were published by H. Rubens and his co-workers in Germany. One or two researchers from the US joined the Rubens group per year from 1890 to the beginning of 1910. During the next year or two, some researchers joined M. Czerny, who is seen as the successor of Rubens. After World War II, far-infrared techniques progressed further in the US, which did not suffer damage during the war. The advanced techniques of far-infrared grating spectroscopy were transferred from the US (R. A. Oetjen) to Japan (H. Yoshinaga). Yoshinaga and his co-workers expanded the techniques by themselves. This paper describes the historical development of far-infrared spectroscopy before Fourier transform spectroscopy became popular around 1970.

Mapping X-Disease Phytoplasma Resistance in Prunus virginiana.

PubMed

Lenz, Ryan R; Dai, Wenhao

2017-01-01

Phytoplasmas such as " Candidatus Phytoplasma pruni," the causal agent of X-disease of stone fruits, lack detailed biological analysis. This has limited the understanding of plant resistance mechanisms. Chokecherry ( Prunus virginiana L.) is a promising model to be used for the plant-phytoplasma interaction due to its documented ability to resist X-disease infection. A consensus chokecherry genetic map "Cho" was developed with JoinMap 4.0 by joining two parental maps. The new map contains a complete set of 16 linkage groups, spanning a genetic distance of 2,172 cM with an average marker density of 3.97 cM. Three significant quantitative trait loci (QTL) associated with X-disease resistance were identified contributing to a total of 45.9% of the phenotypic variation. This updated genetic linkage map and the identified QTL will provide the framework needed to facilitate molecular genetics, genomics, breeding, and biotechnology research concerning X-disease in chokecherry and other Prunus species.

Method of joining ITM materials using a partially or fully-transient liquid phase

DOEpatents

Butt, Darryl Paul; Cutler, Raymond Ashton; Rynders, Steven Walton; Carolan, Michael Francis

2006-03-14

A method of forming a composite structure includes: (1) providing first and second sintered bodies containing first and second multicomponent metallic oxides having first and second identical crystal structures that are perovskitic or fluoritic; (2) providing a joint material containing at least one metal oxide: (a) containing (i) at least one metal of an identical IUPAC Group as at least one sintered body metal in one of the multicomponent metallic oxides, (ii) a first row D-Block transition metal not contained in the multicomponent metallic oxides, and/or (iii) a lanthanide not contained in the multicomponent metallic oxides; (b) free of metals contained in the multicomponent metallic oxides; (c) free of cations of boron, silicon, germanium, tin, lead, arsenic, antimony, phosphorus and tellurium; and (d) having a melting point below the sintering temperatures of the sintered bodies; and (3) heating to a joining temperature above the melting point and below the sintering temperatures.

Enhancing project-oriented learning by joining communities of practice and opening spaces for relatedness

NASA Astrophysics Data System (ADS)

Pascual, R.

2010-03-01

This article describes an extension to project-oriented learning to increase social construction of knowledge and learning. The focus is on: (a) maximising opportunities for students to share their knowledge with practitioners by joining communities of practice, and (b) increasing their intrinsic motivation by creating conditions for student's relatedness. The case study considers a last year capstone course in Mechanical Engineering. The work addresses innovative practices of active learning and beyond project-oriented learning through: (a) the development of a web-based decision support system, (b) meetings between the communities of students, maintenance engineers and academics, and (c) new off-campus group instances. The author hypothesises that this multi-modal approach increases deep learning and social impact of the educational process. Surveys to the actors support a successful achievement of the educational goals. The methodology can easily be extended to further improve the learning process.

LHC@Home: a BOINC-based volunteer computing infrastructure for physics studies at CERN

NASA Astrophysics Data System (ADS)

Barranco, Javier; Cai, Yunhai; Cameron, David; Crouch, Matthew; Maria, Riccardo De; Field, Laurence; Giovannozzi, Massimo; Hermes, Pascal; Høimyr, Nils; Kaltchev, Dobrin; Karastathis, Nikos; Luzzi, Cinzia; Maclean, Ewen; McIntosh, Eric; Mereghetti, Alessio; Molson, James; Nosochkov, Yuri; Pieloni, Tatiana; Reid, Ivan D.; Rivkin, Lenny; Segal, Ben; Sjobak, Kyrre; Skands, Peter; Tambasco, Claudia; Veken, Frederik Van der; Zacharov, Igor

2017-12-01

The LHC@Home BOINC project has provided computing capacity for numerical simulations to researchers at CERN since 2004, and has since 2011 been expanded with a wider range of applications. The traditional CERN accelerator physics simulation code SixTrack enjoys continuing volunteers support, and thanks to virtualisation a number of applications from the LHC experiment collaborations and particle theory groups have joined the consolidated LHC@Home BOINC project. This paper addresses the challenges related to traditional and virtualized applications in the BOINC environment, and how volunteer computing has been integrated into the overall computing strategy of the laboratory through the consolidated LHC@Home service. Thanks to the computing power provided by volunteers joining LHC@Home, numerous accelerator beam physics studies have been carried out, yielding an improved understanding of charged particle dynamics in the CERN Large Hadron Collider (LHC) and its future upgrades. The main results are highlighted in this paper.

Aluminum and stainless steel tubes joined by simple ring and welding process

NASA Technical Reports Server (NTRS)

Townhill, A.

1967-01-01

Duranel ring is used to join aluminum and stainless steel tubing. Duranel is a bimetal made up of roll-bonded aluminum and stainless steel. This method of joining the tubing requires only two welding operations.

Holographic optical assembly and photopolymerized joining of planar microspheres

DOE PAGES

Shaw, L. A.; Chizari, S.; Panas, R. M.; ...

2016-07-27

The aim of this research is to demonstrate a holographically driven photopolymerization process for joining colloidal particles to create planar microstructures fixed to a substrate, which can be monitored with real-time measurement. Holographic optical tweezers (HOT) have been used to arrange arrays of microparticles prior to this work; here we introduce a new photopolymerization process for rapidly joining simultaneously handled microspheres in a plane. Additionally, we demonstrate a new process control technique for efficiently identifying when particles have been successfully joined by measuring a sufficient reduction in the particles’ Brownian motion. Furthermore, this technique and our demonstrated joining approach enablemore » HOT technology to take critical steps toward automated additive fabrication of microstructures.« less

DNA double strand break repair in human bladder cancer is error prone and involves microhomology-associated end-joining

PubMed Central

Bentley, Johanne; Diggle, Christine P.; Harnden, Patricia; Knowles, Margaret A.; Kiltie, Anne E.

2004-01-01

In human cells DNA double strand breaks (DSBs) can be repaired by the non-homologous end-joining (NHEJ) pathway. In a background of NHEJ deficiency, DSBs with mismatched ends can be joined by an error-prone mechanism involving joining between regions of nucleotide microhomology. The majority of joins formed from a DSB with partially incompatible 3′ overhangs by cell-free extracts from human glioblastoma (MO59K) and urothelial (NHU) cell lines were accurate and produced by the overlap/fill-in of mismatched termini by NHEJ. However, repair of DSBs by extracts using tissue from four high-grade bladder carcinomas resulted in no accurate join formation. Junctions were formed by the non-random deletion of terminal nucleotides and showed a preference for annealing at a microhomology of 8 nt buried within the DNA substrate; this process was not dependent on functional Ku70, DNA-PK or XRCC4. Junctions were repaired in the same manner in MO59K extracts in which accurate NHEJ was inactivated by inhibition of Ku70 or DNA-PKcs. These data indicate that bladder tumour extracts are unable to perform accurate NHEJ such that error-prone joining predominates. Therefore, in high-grade tumours mismatched DSBs are repaired by a highly mutagenic, microhomology-mediated, alternative end-joining pathway, a process that may contribute to genomic instability observed in bladder cancer. PMID:15466592

Development of a procedure for forming assisted thermal joining of tubes

NASA Astrophysics Data System (ADS)

Chen, Hui; Löbbe, Christian; Staupendahl, Daniel; Tekkaya, A. Erman

2018-05-01

With the demand of lightweight design in the automotive industry, not only the wall-thicknesses of tubular components of the chassis or spaceframe are continuously decreased. Also the thicknesses of exhaust system parts are reduced to save material and mass. However, thinner tubular parts bring about additional challenges in joining. Welding or brazing methods, which are utilized in joining tubes with specific requirements concerning leak tightness, are sensitive to the gap between the joining partners. Furthermore, a large joining area is required to ensure the durability of the joint. The introduction of a forming step in the assembled state prior to thermal joining can define and control the gap for subsequent brazing or welding. The mechanical pre-joint resulting from the previously described calibration step also results in easier handling of the tubes prior to thermal joining. In the presented investigation, a spinning process is utilized to produce force-fit joints of varying lengths and diameter reduction and form-fit joints with varying geometrical attributes. The spinning process facilitates a high formability and geometrical flexibility, while at the achievable precision is high and the process forces are low. The strength of the joints is used to evaluate the joint quality. Finally, a comparison between joints produced by forming with subsequent brazing and original tube is conducted, which presents the high performance of the developed procedure for forming assisted thermal joining.

Daring to Marry: Marriage Equality Activism After Proposition 8 as Challenge to the Assimilationist/Radical Binary in Queer Studies.

PubMed

Weber, Shannon

2015-01-01

I analyze three case studies of marriage equality activism and marriage equality-based groups after the passage of Proposition 8 in California. Evaluating the JoinTheImpact protests of 2008, the LGBTQ rights group GetEQUAL, and the group One Struggle One Fight, I argue that these groups revise queer theoretical arguments about marriage equality activism as by definition assimilationist, homonormative, and single-issue. In contrast to such claims, the cases studied here provide a snapshot of heterogeneous, intersectional, and coalition-based social justice work in which creative methods of protest, including direct action and flash mobs, are deployed in militant ways for marriage rights and beyond.

Effectiveness of Combined Smartwatch and Social Media Intervention on Breast Cancer Survivor Health Outcomes: A 10-Week Pilot Randomized Trial.

PubMed

Pope, Zachary C; Zeng, Nan; Zhang, Rui; Lee, Hee Yun; Gao, Zan

2018-06-07

Physical activity (PA) among breast cancer survivors (BCS) can improve this population's health and quality of life (QoL). This study evaluated the effectiveness of a combined smartwatch- and social media-based health education intervention on BCS's health outcomes. Thirty BCS ( X ¯ age = 52.6 ± 9.3 years; X ¯ Wt = 80.2 ± 19.6 kg) participated in this 10-week, 2-arm randomized trial, with BCS randomized into: (1) experimental group ( n = 16): received Polar M400 smartwatches for daily PA tracking and joined a Facebook group wherein Social Cognitive Theory-related PA tips were provided twice weekly; and (2) comparison group ( n = 14): only joined separate, but content-identical Facebook group. Outcomes included PA, physiological, psychosocial, and QoL variables. Specifically, PA and energy expenditure (EE) was assessed by ActiGraph GT3X+ accelerometers while physiological, psychosocial, and QoL were examined via validated instruments at baseline and post-intervention. No baseline group differences were observed for any variable. Ten BCS dropped out of the study (experimental: 4; comparison: 6). Compared to completers, dropouts differed significantly on several outcomes. Thus, a per-protocol analysis was performed, revealing significant group differences for changes in social support ( t = -2.1, p = 0.05) and barriers ( t = -2.2, p = 0.04). Interestingly, the comparison group demonstrated improvements for both variables while the intervention group demonstrated slightly decreased social support and no change in barriers. Notably, both groups demonstrated similarly increased daily light PA, moderate-to-vigorous PA, EE, and steps of 7.7 min, 5.1 min, 25.1 kcals, and 339 steps, respectively, over time. Despite extensive user training, several experimental BCS found the Polar M400 use difficult-possibly decreasing intervention adherence. Future interventions should utilize simpler smartwatches to promote PA among middle-aged clinical/non-clinical populations.

Costs of accountable care organization participation for primary care providers: early stage results.

PubMed

Hofler, Richard A; Ortiz, Judith

2016-07-28

Little is known about the impact of joining an Accountable Care Organization (ACO) on primary care provider organization's costs. The purpose of this study was to determine whether joining an ACO is associated with an increase in a Rural Health Clinic's (RHC's) cost per visit. The analyses focused on cost per visit in 2012 and 2013 for RHCs that joined an ACO in 2012 and cost per visit in 2013 for RHCs that joined an ACO in 2013. The RHCs were located in nine states. Data were obtained from Medicare Cost Reports. The analysis was conducted taking a treatment effects approach where the treatment is joining an ACO. Propensity-score matching was employed to provide multiple single and pooled estimates of the average treatment effect on the treated. Four-hundred thirty four to 544 RHCs (depending on the type of analysis and the variables used) were used in the several analyses. Seven of the RHCs joined an ACO in 2012 and 14 joined an ACO in 2013. The mean cost per visit for RHCs that did not join an ACO rose 4.40 % from 2011 to 2012 whereas the mean cost per visit for RHCs that joined an ACO rose by triple: 13.5 %. All of the pooled estimates of the average treatment effect on the treated from the propensity-score matching showed that joining an ACO was associated with higher mean cost per visit. The range of the estimated mean cost per visit differences was $17.19 (p value = 0.00) to $25.19 (p value = 0.00). This study is one of the first to describe the cost of ACO participation from the perspective of primary care provider organizations. It appears that for at least one type of primary care provider - the RHC - there are substantial costs associated with ACO participation during the first two years.

Robust Joining and Integration of Advanced Ceramics and Composites: Challenges, Opportunities, and Realities

NASA Technical Reports Server (NTRS)

Singh, Mrityunjay

2006-01-01

Advanced ceramics and fiber reinforced composites are under active consideration for use in a wide variety of high temperature applications within the aeronautics, space transportation, energy, and nuclear industries. The engineering designs of ceramic and composite components require fabrication and manufacturing of large and complex shaped parts of various thicknesses. In many instances, it is more economical to build up complex shapes by joining simple geometrical shapes. In addition, these components have to be joined or assembled with metallic sub-components. Thus, joining and attachment have been recognized as enabling technologies for successful utilization of ceramic components in various demanding applications. In this presentation, various challenges and opportunities in design, fabrication, and testing of high temperature joints in advanced ceramics and ceramic matrix composites will be presented. Silicon carbide based advanced ceramics and fiber reinforced composites in different shapes and sizes, have been joined using an affordable, robust ceramic joining technology. In addition, some examples of metal-ceramic brazing will also be presented. Microstructure and high temperature mechanical properties of joints in silicon carbide ceramics and composites will be reported. Various joint design philosophies and design issues in joining of ceramics and composites will be discussed.

Experimental Investigation on Thermal Effects in Ultrasonic Joining of Thin Poly(ethylene terephthalate) Films Using Torsional Vibrations

NASA Astrophysics Data System (ADS)

Adachi, Kazunari; Uchiyama, Kenta; Kuriyama, Takashi; Miyata, Ken; Hisamatsu, Tokuro

2009-11-01

The authors previously determined that thermal effects are not a dominant factor in the ultrasonic joining of very low density polyethylene (VLDPE) films using torsional vibration. Now, to confirm that the plastic materials are not “melted” by mechanically generated heat in the joining, they have conducted joining experiments for thin poly(ethylene terephthalate) (PET) films. The temperature at the interface of two PET films of 0.1 mm thickness only increased to approximately 100 °C, and no trace of liquidation of the material was observed at the interface under a polarizing microscope. Investigation using a differential scanning calorimeter (DSC) revealed that the “melting point” of PET is about 260 °C, and an ultrasonically joined specimen showed no significant difference in thermal characteristics compared with an intact PET film. It was also determined that the PET films cannot be joined even after being pressed together for a period of 30 min or longer at approximately 150 °C. From the results obtained using the microscope and the DSC, the authors conclude that melting of the materials plays essentially no role in ultrasonic plastic joining.

JOINING DISSIMILAR MATERIALS USING FRICTION STIR SCRIBE TECHNIQUE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Upadhyay, Piyush; Hovanski, Yuri; Jana, Saumyadeep

2016-09-01

Development of robust and cost effective method of joining dissimilar materials can provide a critical pathway to enable widespread use of multi-material design and components in mainstream industrial applications. The use of multi-material components such as Steel-Aluminum, Aluminum-Polymer allows design engineers to optimize material utilization based on service requirements and often lead weight and cost reductions. However producing an effective joint between materials with vastly different thermal, microstructural and deformation response is highly problematic using conventional joining and /or fastening methods. This is especially challenging in cost sensitive high volume markets that largely rely on low–cost joining solutions. Friction Stirmore » Scribe technology was developed to meet the demands of joining materials with drastically different properties and melting regimes. The process enables joining of light metals like Magnesium and Aluminum to high temperature materials like Steels and Titanium. Additionally viable joints between polymer composites and metal can also be made using this method. This paper will present state of the art, progress made and challenges associated with this innovative derivative of Friction Stir welding in reference to joining dissimilar metals and polymer/metal combinations.« less

Investigation of Flat Clinching Process Combined with Material Forming Technology for Aluminum Alloy.

PubMed

Chen, Chao; Zhao, Shengdun; Han, Xiaolan; Wang, Yongfei; Zhao, Xuzhe

2017-12-15

In recent years, the use of aluminum alloy has tended to increase for building lightweight automobiles to reduce their automotive weight, which is helpful to save energy and protect the environment. In order to join aluminum alloy, a flat-clinching process combined with material forming technology was investigated to join aluminum alloy sheets using an experimental and a numerical method. Al1060 was chosen as the material of the sheet, and DEFORM-2D software was used to build the numerical model. After the numerical model was validated by the experimental results, the influences of punch diameter and holder force on the materials deforming behavior of the clinched joint were analyzed using the numerical model. Then, the material flow, joining ability, and joining quality were investigated to assess the clinched joint. The results showed that an increase in punch diameter could give rise to an increase in neck thickness and interlocking length, while an increase in blank holder force induced a decrease in interlocking length and an increase in neck thickness. The joining quality could be increased by increasing the forming force. It can be concluded that a clinched joint has better joining quality for joining light-weight sheets onto automotive structures.

Joining Dissimilar Materials Using Friction Stir Scribe Technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Upadhyay, Piyush; Hovanski, Yuri; Jana, Saumyadeep

2016-10-03

Development of a robust and cost-effective method of joining dissimilar materials could provide a critical pathway to enable widespread use of multi-material designs and components in mainstream industrial applications. The use of multi-material components such as steel-aluminum and aluminum-polymer would allow design engineers to optimize material utilization based on service requirements and could often lead to weight and cost reductions. However, producing an effective joint between materials with vastly different thermal, microstructural, and deformation responses is highly problematic using conventional joining and/or fastening methods. This is especially challenging in cost sensitive, high volume markets that largely rely on low costmore » joining solutions. Friction stir scribe technology was developed to meet the demands of joining materials with drastically different properties and melting regimes. The process enables joining of light metals like magnesium and aluminum to high temperature materials like steel and titanium. Viable joints between polymer composites and metal can also be made using this method. This paper will present the state of the art, progress made, and challenges associated with this innovative derivative of friction stir welding in reference to joining dissimilar metals and polymer/metal combinations.« less

Laser hybrid joining of plastic and metal components for lightweight components

NASA Astrophysics Data System (ADS)

Rauschenberger, J.; Cenigaonaindia, A.; Keseberg, J.; Vogler, D.; Gubler, U.; Liébana, F.

2015-03-01

Plastic-metal hybrids are replacing all-metal structures in the automotive, aerospace and other industries at an accelerated rate. The trend towards lightweight construction increasingly demands the usage of polymer components in drive trains, car bodies, gaskets and other applications. However, laser joining of polymers to metals presents significantly greater challenges compared with standard welding processes. We present recent advances in laser hybrid joining processes. Firstly, several metal pre-structuring methods, including selective laser melting (SLM) are characterized and their ability to provide undercut structures in the metal assessed. Secondly, process parameter ranges for hybrid joining of a number of metals (steel, stainless steel, etc.) and polymers (MABS, PA6.6-GF35, PC, PP) are given. Both transmission and direct laser joining processes are presented. Optical heads and clamping devices specifically tailored to the hybrid joining process are introduced. Extensive lap-shear test results are shown that demonstrate that joint strengths exceeding the base material strength (cohesive failure) can be reached with metal-polymer joining. Weathering test series prove that such joints are able to withstand environmental influences typical in targeted fields of application. The obtained results pave the way toward implementing metalpolymer joints in manufacturing processes.

Assessing the State-of-the-Art in Dynamic Discovery of Ad Hoc Network Services

DTIC Science & Technology

2001-07-18

directed -- discovery mode. It is part of the SCM_Discovery -- Module. Sends Unicast messages to SCMs on list of -- SCMS to be discovered until all... SCMS are found. -- Receives updates from SCM DB of discovered SCMs and -- removes SCMs accordingly -- NOTE: Failure and recovery behavior are not...ALLFindService10 SM4 GROUP1GroupJoin10 SCM1 SM4LinkFail5 SM4NodeFail5 ParametersCommandTime TopologyScenario Execute with Rapide For All (SM, SD, SCM

Dude, You Are Speaking Romulan

NASA Astrophysics Data System (ADS)

Reddy, Christopher M.

2010-10-01

During the height of the Deepwater Horizon oil spill disaster, I joined a group of engineers and other scientists to discuss the evidence for an oil plume, at least 22 miles long and about a mile wide, floating 3000 feet beneath the surface of the Gulf of Mexico. As the chemist in the group, I wondered aloud about how we could exploit the aqueous solubilities of the petroleum hydrocarbons, benzene, toluene, ethylbenzene, and total xylenes to understand plume formation. I suspected the key to knowledge lay in the plume's chemical properties.

Advanced fusion welding processes, solid state joining and a successful marriage. [production of aerospace structures

NASA Technical Reports Server (NTRS)

Miller, F. R.

1972-01-01

Joining processes for aerospace systems combine fusion welding and solid state joining during production of metal structures. Detailed characteristics of electron beam welding, plasma arc welding, diffusion welding, inertia welding and weldbond processes are discussed.

Advanced concepts in joining by conventional processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, G.R.; Fasching-James, A.A.; Onsoien, M.I.

1994-12-31

Innovations which can be made to conventional arc welding processes so that advanced materials can be more efficiently joined are considered. Three examples are discussed: (1) GTA welding of iron aluminides, (2) GMA welding of advanced steels, and (3) SMA welding of structural steels. Advanced materials present new challenges for the materials joining specialist. The three examples discussed in this paper demonstrate, however, that modest but creative alterations of conventional GTAW, GMAW, or SMAW processes can provide new and better controls for solving advanced materials joining problems.

Good medical ethics, from the inside out--and back again.

PubMed

Oakley, Justin

2015-01-01

I argue here that good medical ethics requires an empirically-informed moral psychology of medical virtue along with sound action-guiding prescriptions for virtuous medical practice. After distinguishing between three levels of justification, I indicate how medical virtue ethics can draw constructively on relevant empirical research in developing feasible and realistic aspirational standards for doctors, and in evaluating how policymakers can support doctors in acting on the virtues that doctors agreed to be guided by when they joined the profession. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Live neighbor-joining.

PubMed

Telles, Guilherme P; Araújo, Graziela S; Walter, Maria E M T; Brigido, Marcelo M; Almeida, Nalvo F

2018-05-16

In phylogenetic reconstruction the result is a tree where all taxa are leaves and internal nodes are hypothetical ancestors. In a live phylogeny, both ancestral and living taxa may coexist, leading to a tree where internal nodes may be living taxa. The well-known Neighbor-Joining heuristic is largely used for phylogenetic reconstruction. We present Live Neighbor-Joining, a heuristic for building a live phylogeny. We have investigated Live Neighbor-Joining on datasets of viral genomes, a plausible scenario for its application, which allowed the construction of alternative hypothesis for the relationships among virus that embrace both ancestral and descending taxa. We also applied Live Neighbor-Joining on a set of bacterial genomes and to sets of images and texts. Non-biological data may be better explored visually when their relationship in terms of content similarity is represented by means of a phylogeny. Our experiments have shown interesting alternative phylogenetic hypothesis for RNA virus genomes, bacterial genomes and alternative relationships among images and texts, illustrating a wide range of scenarios where Live Neighbor-Joining may be used.

B Physics at the D0 experiment A Mexican review

DOE Office of Scientific and Technical Information (OSTI.GOV)

De La Cruz-Burelo, E.

2010-07-29

On April of 1992 a Mexican group from Cinvestav officially joined the D0 experiment, one of the two experiments in the Tevatron collider at Fermilab. The seed for this experimental group on high energy physics from Cinvestav was planted in Mexico in some measure by Augusto Garcia, to whom this workshop is in memorial. Augusto's efforts and support to groups dedicated to this area was clear and important. Some of these seeds have given origin to today's established Mexican groups on experimental high energy physics, one example of this is the Mexican group at D0. I present here a shortmore » review of some of the D0 results on which the Mexican group has contributed, emphasizing the last decade, which I have witnessed.« less

Electrically conductive alternating copolymers

DOEpatents

Aldissi, M.; Jorgensen, B.S.

1987-08-31

Polymers which are soluble in common organic solvents and are electrically conductive, but which also may be synthesized in such a manner that they become nonconductive. Negative ions from the electrolyte used in the electrochemical synthesis of a polymer are incorporated into the polymer during the synthesis and serve as a dopant. A further electrochemical step may be utilized to cause the polymer to be conductive. The monomer repeat unit is comprised of two rings, a pyrrole molecule joined to a thienyl group, or a furyl group, or a phenyl group. The individual groups of the polymers are arranged in an alternating manner. For example, the backbone arrangement of poly(furylpyrrole) is -furan-pyrrole-furan-pyrrole- furan-pyrrole. An alkyl group or phenyl group may be substituted for either or both of the hydrogen atoms of the pyrrole ring.

Feasibility of community-based health insurance in rural tropical Ecuador.

PubMed

Eckhardt, Martin; Forsberg, Birger Carl; Wolf, Dorothee; Crespo-Burgos, Antonio

2011-03-01

The main objective of this study was to assess people's willingness to join a community-based health insurance (CHI) model in El Páramo, a rural area in Ecuador, and to determine factors influencing this willingness. A second objective was to identify people's understanding and attitudes toward the presented CHI model. A cross-sectional survey was carried out using a structured questionnaire. Of an estimated 829 households, 210 were randomly selected by two-stage cluster sampling. Attitudes toward the scheme were assessed. Information on factors possibly influencing willingness to join was collected and related to the willingness to join. To gain an insight into a respondent's possible ability to pay, health care expenditure on the last illness episode was assessed. Feasibility was defined as at least 50% of household heads willing to join the scheme. Willingness to join the CHI model for US$30 per year was 69.3%. With affiliation, 92.2% of interviewees stated that they would visit the local health facility more often. Willingness to join was found to be negatively associated with education. Other variables showed no significant association with willingness to join. The study showed a positive attitude toward the CHI scheme. Substantial health care expenditures on the last illness episode were documented. The investigation concludes that CHI in the study region is feasible. However, enrollments are likely to be lower than the stated willingness to join. Still, a CHI scheme should present an interesting financing alternative in rural areas where services are scarce and difficult to sustain.

A note on the reproductive performance of Damara, Dorper and Merino sheep under optimum management and nutrition for Merino ewes in the eastern wheatbelt of Western Australia.

PubMed

Kilminster, Tanya F; Greeff, Johan C

2011-10-01

The reproductive performance of 48 Damara, 42 Dorper and 46 Merino ewes was evaluated under an optimum nutritional regime for Merino ewes that included one annual joining in a mixed (cropping and sheep) farming system in the eastern wheatbelt of Western Australia (W.A.) over a 3-year period. In 2005, when the Damara, Dorper and Merino ewes were aged between 8 and 9 months at joining and weighed 41.2, 42.4 and 33.3 kg with average body condition scores of 2.3, 2.4 and 1.8, respectively, their weaning rates were 71% (Damara), 81% (Dorper) and 13% (Merino). The Merino ewes had significantly lighter body weights and were lower conditioned (p < 0.001) resulting in significantly lower weaning rates (p < 0.001). In 2006, the Damara, Dorper and Merino ewes weighed 61.9, 69.5 and 61.6 kg at joining, with body condition scores of 2.8, 3.3 and 2.8, respectively, resulting in weaning rates of 52% (Damara), 122% (Dorper) and 117% (Merino). While the Damara and Merino weights and body condition scores were not different (p > 0.05), the Damara weaning rates were significantly lower compared with the Dorper and Merino groups (p < 0.001). The Dorpers were heavier and greater conditioned (p < 0.001); however, the weaning rates between the Dorper and Merino were not different (p > 0.05). In 2007, the Damara, Dorper and Merino ewes weighed 71.6, 77.1 and 70.2 kg at joining with body condition scores of 2.8, 2.8 and 2.5, respectively. Again, the Dorper ewes were heavier (p < 0.001) than the Damaras and Merinos, which were not different (p > 0.05). The Damara and Dorper had the same body condition while the Merino ewes were less and different (p < 0.05). However, there were differences in weaning rates between the three breeds (p < 0.001), of 64% (Damara), 105% (Dorper) and 134% (Merino). Over the 3-year period, under a nutritional management system optimal for Merino sheep and with one annual joining, with increasing age the Merino ewes weaned more lambs. However, while the Damara and Dorper ewes conceived and weaned relatively high lamb numbers when they were joined as lambs, their reproductive performance decreased over time. This nutritional regime resulted in increased levels of fatness of the Damara and Dorper ewes with no increase in reproduction rates under an annual joining system. A significant factor for the lower conception and weaning rates in the Damara ewes was the enlarged fat tail due to the increased fat levels, which made it difficult for the rams to impregnate the ewes.

Quality of Educational Resources: A Comparative Evaluation of Schools That Joined PISA 2015 from Turkey and Singapore

ERIC Educational Resources Information Center

Özkan, Metin; Balci, Suphi; Kayan, Selman; Is, Engin

2018-01-01

The objective of the study was to make a comparison among the two countries according to the level of sufficiency of educational resources and to determine the accuracy level at which variables related to educational resources can classify the schools on the basis of countries. Relational survey model was used. The sample group of the study was…

Civil Disobedience

ERIC Educational Resources Information Center

Brown, Angela Khristin

2014-01-01

There is a good child, of any race, who is bullied. And as he grows older, He joins a hate group or a gang too, was bullied by every race, who bullied me. And as I grew older fought for equality for everyone. This is why I became an activist. Thesis why I am a poet. God asks are unwilling to die, fighting for what you believe. This is where I…

The National Film Board's Studio D: Feminists Making Films for Peace.

ERIC Educational Resources Information Center

Taylor, Anita

Studio D of the National Film Board of Canada, a women's film making unit established to make films by, for, and about women, has created a group of five films that effectively develop the argument that women can and must join the effort to bring peace to a nuclear world. The first of these peace films, "If You Love This Planet,"…

The Current State and Problems of Czechoslovak Medical Biometeorology

DTIC Science & Technology

1961-03-24

First Working Conference of the Bioclimatological Group of the Czechoslovak Meteorological Society of the Czechoslovak Academy of Sciences, held on 13...shows soms systematic work, V Struzka had already referred to the problems and tasks of biometeorology, bioclimatology , and spa meteorology at the First...International Society fo? Bioclimatology and Biometeorology in 1956j its ranks were joined by members of the individual laboratories in our country

Inside KSC! for May 11, 2018

NASA Image and Video Library

2018-05-11

NASA’s InSight spacecraft is on a six-month, 300-million mile voyage to Mars, following a successful liftoff from Vandenberg Air Force Base in California on May 5. “The Voice of Kennedy Launch Control” now has a place on the “Chroniclers wall.” George Diller joined the prestigious “Chroniclers” group during a ceremony at Kennedy’s NASA News Center on May 4.

A Reflective Account of a Preservice Teacher's Effort to Implement a Progressive Curriculum in Field Practice

ERIC Educational Resources Information Center

Lam, Bick Har

2011-01-01

This essay presents a reflective account of a preservice teacher's experience in her fieldwork practice. The author, a professor in the preservice teacher's education institute, acted as a critical friend and joined in the reflection as an equal. Based on the voices of the preservice teacher and a group of primary teachers, this essay presents a…

26 CFR 1.1502-95A - Rules on ceasing to be a member of a consolidated group generally applicable for corporations...

Code of Federal Regulations, 2010 CFR

2010-04-01

... merger. (e) Filing the election to apportion—(1) Form of the election to apportion. An election under... subgroup). See paragraph (e) of this section for the time and manner of making the election to apportion... portion of the Year 1 consolidated net operating loss, and thereafter each joins with M in filing...

Effect of Dietary Intervention on Prostate Tumor Development in Tramp Mice

DTIC Science & Technology

2005-05-01

successful. Dr. Olga Rogozina who has both an MD. and Ph.D. join our research group May of 2004. She is working 50% effort on this project and will be...3443. 5. Gingrich,J.R., Barrios ,R.J., Morton,R.A., Boyce,B.F., DeMayo,F.J., Finegold,M.J., Angelopoulou,R., Rosen,J.M., and Greenberg,N.M. (1996

Using a Modified Argument-Driven Inquiry to Promote Elementary School Students' Engagement in Learning Science and Argumentation

ERIC Educational Resources Information Center

Chen, Hsiang-Ting; Wang, Hsin-Hui; Lu, Ying-Yan; Lin, Huann-shyang; Hong, Zuway-R

2016-01-01

This study explored the effects of a modified argument-driven inquiry approach on Grade 4 students' engagement in learning science and argumentation in Taiwan. The students were recruited as an experimental group (EG, n?=?36) to join a 12-week study, while another 36 Grade 4 students from the same schools were randomly selected to be the…

Early Program Development

NASA Image and Video Library

1969-01-01

As a result of the recommendations from President Nixon's Space Task Group, Marshall Space Flight Center engineers studied various ways to enhance commonality and integration in the American space program. This artist's concept from 1969 shows a possible spacecraft configuration for a marned Mars mission. In this mode, two planetary vehicles, each powered by a Nuclear Shuttle, are joined together during the flight and rotated to provide artificial gravity for crew members.

CTC Sentinel. Volume 4, Issue 4, April 2011

DTIC Science & Technology

2011-04-01

Online, April 28, 2010. 3 Personal interview, Khalid Khwaja, March 2010. 4 Personal interview, Usman Punjabi , Winter 2010. 5 Hamid Mir, “What Was...members’ identities. It eventually emerged that the Punjabi Taliban—jihadists who left Kashmir-focused militant groups and joined the TTP—were...involved in the kidnapping operation. Usman Punjabi , or Mohammad Omar as he identified himself when contacting the media, became the link between

The role of beginner’s luck in learning to prefer risky patches by socially foraging house sparrows

PubMed Central

2013-01-01

Although there has been extensive research on the evolution of individual decision making under risk (when facing variable outcomes), little is known on how the evolution of such decision-making mechanisms has been shaped by social learning and exploitation. We presented socially foraging house sparrows with a choice between scattered feeding wells in which millet seeds were hidden under 2 types of colored sand: green sand offering ~80 seeds with a probability of 0.1 (high risk–high reward) and yellow sand offering 1 seed with certainty (low risk–low reward). Although the expected benefit of choosing variable wells was 8 times higher than that of choosing constant wells, only some sparrows developed a preference for variable wells, whereas others developed a significant preference for constant wells. We found that this dichotomy could be explained by stochastic individual differences in sampling success during foraging, rather than by social foraging strategies (active searching vs. joining others). Moreover, preference for variable or constant wells was related to the sparrows’ success during searching, rather than during joining others or when picking exposed seeds (i.e., they learn when actively searching in the sand). Finally, although for many sparrows learning resulted in an apparently maladaptive risk aversion, group living still allowed them to enjoy profitable variable wells by occasionally joining variable-preferring sparrows. PMID:24137046

Social networking as a learning tool: nursing students' perception of efficacy.

PubMed

Tower, Marion; Latimer, Sharon; Hewitt, Jayne

2014-06-01

The pedagogical use of social networking technology in education is of growing interest to academics as a potential teaching and learning tool. However, the educational use of social networking sites such as Facebook is still under explored. Nursing students often perceive bioscience subjects as difficult and lack self-efficacy in their ability to be successful. In this case, as the final assessment for a bioscience related subject approached, students became increasingly anxious about their ability to perform in the assessment item. To better support students, a Facebook group was formed. The aim of the study was to examine students' perceptions of the efficacy of using Facebook as a tool to support study. A convenience sample of BN students (n=533 across 3 campuses), enrolled in the subject Medications and Safe Administration, were invited to join. 373 BN students joined the group (70% of the student cohort). A solution-focussed orientation underpinned the management of the group. A descriptive, online survey was administered following release of students' results for the final assessment item to assess students' perceptions of how effective the group had been in helping them learn. The survey contained both quantitative and qualitative questions. Responses were received from 89 students (24%). Survey data were analysed descriptively and qualitative data were analysed thematically by the academic team. Students perceived the group to be an innovative method of study support that guided learning by enhancing self-efficacy in their learning. Students also described how it was useful in promoting peer learning and engaging with academics. Social media platforms such as Facebook have the potential to enhance students' self-efficacy in learning and can support students to develop their learning to a deeper level. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Joining-Up Process: Issues in Effective Human Resource Development

ERIC Educational Resources Information Center

Frohman, Alan L.; Kotter, John P.

1975-01-01

Four specific problems associated with ineffective and expensive joining-up which are examined in the article are: (1) mismatched expectations; (2) stifling creativity and challenge; (3) lack of managerial awareness and sensitivity to joining-up issues; and (4) using inappropriate or incomplete screening criteria. Solutions are suggested; a table…

Fermilab Friends for Science Education | Join Us

Science.gov Websites

Fermilab Friends for Science Education FFSE Home About Us Join Us Support Us Contact Us Join Us photo Fermilab Friends for Science Education (FFSE) needs you now! More than ever our society and improving science (science, technology, engineering and mathematics) education. Your donation allows us to

Joining Forces. A Team Approach to Secondary School Development.

ERIC Educational Resources Information Center

Miller, Rima; Corcoran, Thomas B.

This manual is designed to guide the implementation of the Joining Forces Program, a comprehensive improvement process for secondary schools. Implementation of the program requires the cooperative effort of the local school district, state and local education associations, and the administration and staff of participating schools. Joining Forces…

Joining of advanced materials by superplastic deformation

DOEpatents

Goretta, Kenneth C.; Routbort, Jules L.; Gutierrez-Mora, Felipe

2008-08-19

A method for utilizing superplastic deformation with or without a novel joint compound that leads to the joining of advanced ceramic materials, intermetallics, and cermets. A joint formed by this approach is as strong as or stronger than the materials joined. The method does not require elaborate surface preparation or application techniques.

Joining of advanced materials by superplastic deformation

DOEpatents

Goretta, Kenneth C.; Routbort, Jules L.; Gutierrez-Mora, Felipe

2005-12-13

A method for utilizing superplastic deformation with or without a novel joint compound that leads to the joining of advanced ceramic materials, intermetallics, and cermets. A joint formed by this approach is as strong as or stronger than the materials joined. The method does not require elaborate surface preparation or application techniques.

Pulse joining cartridges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

A pulsed joining tool includes a tool body that defines a cavity that receives an inner tubular member and an outer tubular member and a pulse joining cartridge. The tubular members are nested together with the cartridge being disposed around the outer tubular member. The cartridge includes a conductor, such as a wire or foil, that extends around the outer tubular member and is insulated to separate a supply segment from a return segment. A source of stored electrical energy is discharged through the conductor to join the tubular members with an electromagnetic force pulse.

Pulse joining cartridges

DOEpatents

Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

2016-08-23

A pulsed joining tool includes a tool body that defines a cavity that receives an inner tubular member and an outer tubular member and a pulse joining cartridge. The tubular members are nested together with the cartridge being disposed around the outer tubular member. The cartridge includes a conductor, such as a wire or foil, that extends around the outer tubular member and is insulated to separate a supply segment from a return segment. A source of stored electrical energy is discharged through the conductor to join the tubular members with an electromagnetic force pulse.

The Effect of Temperature and Rotational Speed on Structure and Mechanical Properties of Cast Cu Base Alloy (Cu-Al-Si-Fe) Welded by Semisolid Stir Joining Method

NASA Astrophysics Data System (ADS)

Ferasat, Keyvan; Aashuri, Hossein; Kokabi, Amir Hossein; Shafizadeh, Mahdi; Nikzad, Siamak

2015-12-01

Semisolid stir joining has been under deliberation as a possible method for joining of copper alloys. In this study, the effect of temperature and rotational speed of stirrer on macrostructure evaluation and mechanical properties of samples were investigated. Optical microscopy and X-ray diffraction were performed for macro and microstructural analysis. A uniform micro-hardness profile was attained by semisolid stir joining method. The ultimate shear strength and bending strength of welded samples were improved in comparison with the cast sample. There is also lower area porosity in welded samples than the cast metal. The mechanical properties were improved by increasing temperature and rotational speed of the joining process.

Prospects of joining multi-material structures

NASA Astrophysics Data System (ADS)

Sankaranarayanan, R.; Hynes, N. Rajesh Jesudoss

2018-05-01

Spring up trends and necessities make the pipelines for the brand new Technologies. The same way, Multimaterial structures emerging as fruitful alternatives for the conventional structures in the manufacturing sector. Especially manufacturing of transport vehicles is placing a perfect platform for these new structures. Bonding or joining technology plays a crucial role in the field of manufacturing for sustainability. These latest structures are purely depending on such joining technologies so that multi-material structuring can be possible practically. The real challenge lies on joining dissimilar materials of different properties and nature. Escalation of thermoplastic usage in large structural components also faces similar ambiguity for joining multi-material structures. Adhesive bonding, mechanical fastening and are the answering technologies for multi-material structures. This current paper analysis the prospects of these bonding technologies to meet the challenges of tomorrow.

Sibling rivalry: competition between Pol X family members in V(D)J recombination and general double strand break repair.

PubMed

Nick McElhinny, Stephanie A; Ramsden, Dale A

2004-08-01

The nonhomologous end-joining pathway is a major means for repairing double-strand breaks (DSBs) in all mitotic cell types. This repair pathway is also the only efficient means for resolving DSB intermediates in V(D)J recombination, a lymphocyte-specific genome rearrangement required for assembly of antigen receptors. A role for polymerases in end-joining has been well established. They are a major factor in determining the character of repair junctions but, in contrast to 'core' end-joining factors, typically appear to have a subtle impact on the efficiency of end-joining. Recent work implicates several members of the Pol X family in end-joining and suggests surprising complexity in the control of how these different polymerases are employed in this pathway.

Self-Pierce Riveting of Three Aluminium Alloy and Mild Steel Sheets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mori, K.; Abe, Y.; Sakai, S.

2010-06-15

Three aluminium alloy and steel sheets were joined with a self-piercing rivet. Self-pierce riveting has the function of joining steel and aluminium alloys having very different melting points due to plastic joining. The requisites for joining the three sheets are the driving of the rivet leg through the middle sheet, the flaring of the rivet leg in the lower sheet and the prevention of the fracture of the lower sheet. The joinability for various combinations of the three sheets was determined. When the rivet leg is small, no driving through the middle sheet occurs, the lower sheet ruptures for amore » large rivet leg. In addition, 980 MPa high strength steel, mild steel and aluminium alloy sheets were joined by the self-pierce riveting.« less

Evaluating the Upset Protrusion Joining (UPJ) Method to Join magnesium Castings to Dissimilar Metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logan, Stephen D.

2015-08-19

This presentation discusses advantages and best practices for incorporating magnesium in automotive component applications to achieve substantial mass reduction, as well as some of the key challenges with respect to joining, coating, and galvanic corrosion, before providing an introduction and status update of the U.S. Department of Energy and Department of Defense jointly sponsored Upset Protrusion Joining (UPJ) process development and evaluation project. This update includes sharing performance results of a benchmark evaluation of the self-pierce riveting (SPR) process for joining dissimilar magnesium (Mg) to aluminum (Al) materials in four unique coating configurations before introducing the UPJ concept and comparingmore » performance results of the joints made with the UPJ process to those made with the SPR process.« less

Joining and Assembly of Silicon Carbide-based Advanced Ceramics and Composites for High Temperature Applications

NASA Technical Reports Server (NTRS)

Singh, M.

2004-01-01

Silicon carbide based advanced ceramics and fiber reinforced composites are under active consideration for use in wide variety of high temperature applications within the aeronautics, space transportation, energy, and nuclear industries. The engineering designs of ceramic and composite component require fabrication and manufacturing of large and complex shaped parts of various thicknesses. In many instances, it is more economical to build up complex shapes by joining simple geometrical shapes. In addition these components have to be joined or assembled with metallic sub-components. Thus, joining and attachment have been recognized as enabling technologies for successful utilization of ceramic components in various demanding applications. In this presentation, various challenges and opportunities in design, fabrication, and testing o high temperature joints in ceramic matrix composites will be presented. Silicon carbide based advanced ceramics (CVD and hot pressed), and C/SiC and SiC/SiC composites, in different shapes and sizes, have been joined using an affordable, robust ceramic joining technology (ARCJoinT). Microstructure and high temperature mechanical properties of joints in silicon carbide ceramics and CVI and melt infiltrated SiC matrix composites will,be reported. Various joint design philosophies and design issues in joining of ceramics and composites well be discussed.

Improving Self-Pierce Rivet Performance through Processing and Alloy Development

NASA Astrophysics Data System (ADS)

Van Hall, Stephen N.

Spot welding has been used to join steel sheet material in the past during automotive manufacturing. The increasing use of aluminum and mixed materials to achieve continually increasing fuel economy standards requires mechanical joining methods to provide adequate impact performance. One such mechanical joining process is self-pierce riveting (SPR). Self-pierce riveting has grown in popularity in recent years due to fast cycle times, high static strength and fatigue performance as well as the ability to join many different sheet material combinations. Self-pierce rivet utilization has become limited due to the material properties of the rivet in two main areas: the joining of high-strength sheet material and joining of multiple sheet material combinations using a single rivet geometry, referred to as commonization. Two specific case studies have been developed to assess the failures that occur and evaluate potential solutions: joining of press-hardened steel (PHS) to Al6111 and improved commonization ability using a two layer aluminum joint that is currently joined with a specialized rivet. Riveting trials have been performed on each of the two case studies using cold forged rivets produced from 10B37 steel that has been heat-treated through a quench and temper process to a range of hardness levels to evaluate the failures that occur within the rivet. The failures occur with two different modes: buckling of the rivet at hardness values below 550 HV when joining PHS and Al6111 and fractures that occur in the rivet tail at hardness values above 550 HV during joining in each of the case studies under evaluation. The fractures have been attributed to a high degree of hoop strain that forms when the rivets are flared beyond the design specifications. A method to replicate the rivet flaring procedure under laboratory conditions has been developed by flaring the rivets through various strain paths to induce a hoop strain and the resultant fractures. The flaring method shows the ability to replicate the types of fractures that were observed during joining attempts while monitoring applied force, crosshead displacement and strain at the point of fracture at the rivet tail using digital image correlation. Alternative alloys including 4130, 4340 and 5160 were evaluated alongside 10B37 for improved performance after quenching and tempering, austempering and after being intentionally decarburized to varying degrees. The heat-treatments were evaluated through microscopy, fractography, rivet flaring and joining attempts for each case study and alloy under investigation. All of the alternative alloys showed no significant performance gains after being quenched and tempered or austempered. However, hoop strain to failure during flaring was increased between 2-4x after the rivets had been intentionally decarburized. The intentionally decarburized rivets were evaluated through joining trials and provided successful joining for each of the case studies under investigation using 10B37 rivets. Rivets produced from 4340 and 5160 also showed instances of success during joining attempts. The Cockroft and Latham failure criterion was evaluated in regards to rivet flaring through the development of finite element simulations using Abaqus. The Cockroft and Latham failure criterion was able to successfully predict the location of riveting fractures through multiple strain paths, rivet geometries and microstructures. Cockroft and Latham values from tensile tests of 10B37 wire led to an underestimate of the strain to failure when compared to the rivet flaring process for quenched and tempered rivets but was very similar to the strain predicted for rivets that had been intentionally decarburized.

High-precision and high-speed laser microjoining for electronics and microsystems

NASA Astrophysics Data System (ADS)

Gillner, Arnold; Olowinsky, Alexander; Klages, Kilian; Gedicke, Jens; Sari, Fahri

2006-02-01

The joining processes in electronic device manufacturing are today still dominated by conventional joining techniques like press fitting, crimping and resistance welding. Laser beam joining techniques have been under intensive investigations and subsequently new processes for mass manufacturing and high accuracy assembling were established. With the newly developed SHADOW (R) welding technology technical aspects such as tensile strength, geometry and precision of the weld could be improved. This technology provides highest flexibility in weld geometry with a minimum welding time as well as new possibilities in using application adapted materials. Different parts and even different metals can be joined by a non-contact process. The application of a relative movement between the laser beam and the part to be joined at feed rates of up to 60 m/min produces weld seams with a length from 0.6 mm to 15.7 mm using a pulsed Nd:YAG laser with a pulse duration of up to 50 ms. Due to the low energy input, typically 1 J to 6 J, a weld width as small as 50 μm and a weld depth as small as 20 pm have been attained. This results in low distortion of the joined watch components. Within this paper this new welding process will be explained and several examples of joined components will be presented with respect to fundamentals and the sustainable implementation of the SHADOW (R) welding technique into watch manufacturing and electronic industry. For microsystem applications the laser joining technology is modified to join even silicon and glass parts without any melting based on the formation of a thermally induced oxygen bond. New fields of applications for joining different materials such as steel to brass or steel to copper for electrical interconnects will be discussed. Here the SHADOW (R) welding technique offers new possibilities for the combination of good electrical properties of copper with high mechanical stiffness of steel. The paper will give a closer look to microjoining applications especially using the SHADOW (R) welding technique. Basics of the process as well as its application on dedicated examples will be shown for small parts such as axis-wheel combinations and electrical connectors.

Complex Cooperative Strategies in Group-Territorial African Lions

NASA Astrophysics Data System (ADS)

Heinsohn, Robert; Packer, Craig

1995-09-01

Female lions (Panthera leo) showed persistent individual differences in the extent to which they participated in group-territorial conflict. When intergroup encounters were simulated by playback of aggressive vocalizations, some individuals consistently led the approach to the recorded intruder, whereas others lagged behind and avoided the risks of fighting. The lead females recognized that certain companions were laggards but failed to punish them, which suggests that cooperation is not maintained by reciprocity. Modification of the "odds" in these encounters revealed that some females joined the group response when they were most needed, whereas other lagged even farther behind. The complexity of these responses emphasizes the great diversity of individual behavior in this species and the inadequacy of current theory to explain cooperation in large groups.

Understanding How Solidarity Groups-A Community-Based Economic and Psychosocial Support Intervention-Can Affect Mental Health for Survivors of Conflict-Related Sexual Violence in Democratic Republic of the Congo.

PubMed

Koegler, Erica; Kennedy, Caitlin; Mrindi, Janvier; Bachunguye, Richard; Winch, Peter; Ramazani, Paul; Makambo, Maphie Tosha; Glass, Nancy

2018-06-01

Solidarity groups were established in eastern Democratic Republic of Congo to provide female survivors of conflict-related sexual violence an opportunity to generate income, establish networks of support, and cope with atrocities. Qualitative data were collected from 12 members of solidarity groups to explore factors that contributed to members' mental health. All women identified some improvement (physiological, psychological, economic, or social) since joining the solidarity group, but none of the women were free from ailments. Our findings suggest that a multifaceted intervention in women's own communities has the potential to improve multiple aspects of women's lives, including mental health.

The Flying Diamond: A joined aircraft configuration design project, volume 1

NASA Technical Reports Server (NTRS)

Ball, Chris; Czech, Joe; Lentz, Bryan; Kobashigawa, Daryl; Oishi, Curtis; Poladian, David

1988-01-01

The results of the analysis conducted on the Joined Wing Configuration study are presented. The joined wing configuration employs a conventional fuselage and incorporates two wings joined together near their tips to form a diamond shape in both plan view and front view. The arrangement of the lifting surfaces uses the rear wing as a horizontal tail and as a forward wing strut. The rear wing has its root at the tip of the vertical stabilizer and is structurally attached to the trailing edge of the forward wing. This arrangement of the two wings forms a truss structure which is inherently resistant to the aerodynamic bending loads generated during flight. This allows for a considerable reduction in the weight of the lifting surfaces. With smaller internal wing structures needed, the Joined Wing may employ thinner wings which are more suitable for supersonic and hypersonic flight, having less induced drag than conventional cantilever winged aircraft. Inherent in the Joined Wing is the capability of the generation of direct lift and side force which enhance the performance parameters.

Laser beam joining of material combinations for automotive applications

NASA Astrophysics Data System (ADS)

Schubert, Emil; Zerner, Ingo; Sepold, Gerd

1997-08-01

An ideal material for automotive applications would combine the following properties: high corrosion resistance, high strength, high stiffness and not at least a low material price. Today a single material is not able to meet all these requirements. Therefore, in the future different materials will be placed where they meet the requirements best. The result of this consideration is a car body with many different alloys and metals, which have to be joined to one another. BIAS is working on the development of laser based joining technologies for different material combinations, especially for thin sheets used in automotive applications. One result of the research is a joining technology for an aluminum-steel-joint. Using a Nd:YAG laser the problem of brittle intermetallic phases between these materials was overcome. Using suitable temperature-time cycles, elected by a FEM-simulation, the thickness of intermetallic phases was kept below 10 micrometers . This technology was also applied to coated steels, which were joined with different aluminum alloys. Further it is demonstrated that titanium alloys, e.g. used for racing cars, can also be joined with aluminum alloys.

Challenges, Ideas, and Innovations of Joined-Wing Configurations: A Concept from the Past, an Opportunity for the Future

NASA Astrophysics Data System (ADS)

Cavallaro, Rauno; Demasi, Luciano

2016-11-01

Diamond Wings, Strut- and Truss-Braced Wings, Box Wings, and PrandtlPlane, the so-called "JoinedWings", represent a dramatic departure from traditional configurations. Joined Wings are characterized by a structurally overconstrained layout which significantly increases the design space with multiple load paths and numerous solutions not available in classical wing systems. A tight link between the different disciplines (aerodynamics, flight mechanics, aeroelasticity, etc.) makes a Multidisciplinary Design and Optimization approach a necessity from the early design stages. Researchers showed potential in terms of aerodynamic efficiency, reduction of emissions and superior performances, strongly supporting the technical advantages of Joined Wings. This review will present these studies, with particular focus on the United States joined-wing SensorCraft, Strut- and Truss- Braced Wings, Box Wings and PrandtlPlane.

Artificial Nacre from Supramolecular Assembly of Graphene Oxide.

PubMed

Wang, Yang; Li, Ting; Ma, Piming; Zhang, Shengwen; Zhang, Hongji; Du, Mingliang; Xie, Yi; Chen, Mingqing; Dong, Weifu; Ming, Weihua

2018-06-14

Inspired by the "brick-and-mortar" structure and remarkable mechanical performance of nacre, many efforts have been devoted to fabricating nacre-mimicking materials. Herein, a class of graphene oxide (GO) based artificial nacre material with quadruple hydrogen-bonding interactions was fabricated by functionalization of polydopamine-capped graphene oxide (PDG) with 2-ureido-4[1 H]-pyrimidinone (UPy) self-complementary quadruple hydrogen-bonding units followed by supramolecular assembly process. The artificial nacre displays a strict "brick-and-mortar" structure, with PDG nanosheets as the brick and UPy units as the mortar. The resultant nanocomposite shows an excellent balance of strength and toughness. Because of the strong strengthening via quadruple hydrogen bonding, the tensile strength and toughness can reach 325.6 ± 17.8 MPa and 11.1 ± 1.3 MJ m -3 , respectively, thus exceeding natural nacre, and reaching 3.6 and 10 times that of a pure GO artificial nacre. Furthermore, after further H 2 O treatment, the resulting H 2 O-treated PDG-UPy actuator displays significant bending actuations when driven by heat. This work provides a pathway for the development of artificial nacre for their potential applications in energy conversion, temperature sensor, and thermo-driven actuator.

Biomimetic Bone-like Hydroxyapatite by Mineralization on Supramolecular Porous Fiber Networks.

PubMed

Li, Bo; Kan, Lei; Zhang, Xinyue; Li, Jie; Li, Ruiting; Gui, Qinyuan; Qiu, Dengli; He, Fei; Ma, Ning; Wang, Yapei; Wei, Hao

2017-08-29

Hydroxyapatite (HA), the main inorganic component of bone tissue, is mineralized with collagen fibril scaffolds during bone formation. Inspired by the process, a self-assembled porous network architecture was designed and synthesized by using the 2-ureido-4[1H]-pyrimidone (UPy) modified glycerol molecule UPy-Gly, which was further utilized as a template for biomimetic mineralization. When incubated in simulated body fluid (SBF), the HA nucleus first formed in the holes of the template by the induction of hydroxyls on the surface, grew along the nanofibers, and fused with the template to fabricate hydroxyapatite composites (UPy-Gly/HA). Transmission electron microscopic observation demonstrates that the mineral clusters are accumulated by lamella-like nano hydroxyapatite and the elasticity modulus measured by atomic force microscopy is about 5.5 GPa, which is quite close to the natural cancellous bone tissue of human both in structure and in mechanical properties. The Cell Counting Kit 8 (CCK-8) assay of UPy-Gly and UPy-Gly/HA shows noncytotoxicity to mouse fibroblast L-929 cells. This bioinspired composite will be a promising material for potential use in bone tissue implantation and regeneration engineering.

Tough stimuli-responsive supramolecular hydrogels with hydrogen-bonding network junctions.

PubMed

Guo, Mingyu; Pitet, Louis M; Wyss, Hans M; Vos, Matthijn; Dankers, Patricia Y W; Meijer, E W

2014-05-14

Hydrogels were prepared with physical cross-links comprising 2-ureido-4[1H]-pyrimidinone (UPy) hydrogen-bonding units within the backbone of segmented amphiphilic macromolecules having hydrophilic poly(ethylene glycol) (PEG). The bulk materials adopt nanoscopic physical cross-links composed of UPy-UPy dimers embedded in segregated hydrophobic domains dispersed within the PEG matrix as comfirmed by cryo-electron microscopy. The amphiphilic network was swollen with high weight fractions of water (w(H2O) ≈ 0.8) owing to the high PEG weight fraction within the pristine polymers (w(PEG) ≈ 0.9). Two different PEG chain lengths were investigated and illustrate the corresponding consequences of cross-link density on mechanical properties. The resulting hydrogels exhibited high strength and resilience upon deformation, consistent with a microphase separated network, in which the UPy-UPy interactions were adequately shielded within hydrophobic nanoscale pockets that maintain the network despite extensive water content. The cumulative result is a series of tough hydrogels with tunable mechanical properties and tractable synthetic preparation and processing. Furthermore, the melting transition of PEG in the dry polymer was shown to be an effective stimulus for shape memory behavior.

Novel chiral core-shell silica microspheres with trans-(1R,2R)-diaminocyclohexane bridged in the mesoporous shell: synthesis, characterization and application in high performance liquid chromatography.

PubMed

Wu, Xiabing; You, Linjun; Di, Bin; Hao, Weiqiang; Su, Mengxiang; Gu, Yu; Shen, Lingling

2013-07-19

Novel chiral core-shell silica microspheres with trans-(1R,2R)-diaminocyclohexane (DACH) moiety bridged in the mesoporous shell were synthesized using layer-by-layer method. The chiral mesoporous shell around the nonporous silica core was formed by the co-condensation of N,N'-bis-[(triethoxysilyl)propyl]-trans-(1R,2R)-bis-(ureido)-cyclohexane (DACH-BS) and tetraethoxysilane (TEOS) using octadecyltrimethylammonium chloride (C18TMACl) and triblock poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) copolymer (P123) as the templates. The functionalized core-shell silica microspheres were characterized and tested as chiral stationary phases for high performance liquid chromatography (HPLC). R/S-1,1'-bi-2,2'-naphthol, R/S-6,6'-dibromo-1,1'-bi-2-naphthol and R/S-1,1'-bi-2,2'-phenanthrol were enantioseparated rapidly on the column packed with the DACH core-shell silica particles. Moreover, the column packed with core-shell particles exhibited better performance than the column packed with the DACH functionalized periodic mesoporous organosilicas. Copyright © 2013 Elsevier B.V. All rights reserved.

Impact of educational intervention on willingness-to-pay for health insurance: A study of informal sector workers in urban Bangladesh.

PubMed

Khan, Jahangir Am; Ahmed, Sayem

2013-04-29

The reliance on out-of-pocket payments for health services leads to a catastrophic burden for many households in Bangladesh. The World Health Organization suggests that risk-pooling mechanisms should be used for financing healthcare. Like many low-income countries (LIC), a large share of employment in Bangladesh is in the informal sector (88%). Inclusion of these workers in health insurance is a big challenge. Among other barriers, the "literacy gap" for health insurance" is a reason for the low insurance uptake in Bangladesh. The aim of this study is, therefore, to assess the impact of an educational intervention on willingness-to-pay (WTP) for health insurance among informal sector workers in urban Bangladesh. An educational intervention on occupational solidarity and health insurance is offered to groups of informal workers. Educational sessions take place once a week (3-4 hours) during three subsequent weeks for each occupational group. For assessing the impact of the educational intervention, WTP for joining health insurance using occupational solidarity between workers in "pre- and post-treatment" periods as well as between "control and treatment" groups were compared. Multiple-regression analysis is applied for predicting WTP by educational intervention, while controlling for demographic and socioeconomic characteristics. The coefficient of variation (CoV) of the WTP is estimated in control and treatment groups and expected to be lower in the latter. The WTP for health insurance is higher (33.8%) among workers who joined the educational intervention in comparison with those who did not (control group). CoV of WTP is found to be generally lower in post-treatment period and in treatment group compared to pre-treatment period and control group respectively. Educational interventions can be used for increasing demand for health insurance scheme using occupational solidarity among informal sector workers.

The effect of individual liveweight and condition of beef cows on their reproductive performance and birth and weaning weights of calves.

PubMed

Morris, S T; Morel, P C H; Kenyon, P R

2006-04-01

To examine of the influence of liveweight (LW), condition (CS) and age of dam on inter-calving interval (ICI), date of calving, days from joining to calving, and birth and weaning weights of calves. LW and CS were measured in a herd of mixed-aged (3-8 years) Hereford x Friesian beef cows on four occasions, annually, over a 3-year period from joining (the date bulls were introduced into the herd at the start of a restricted breeding season) in November 2000 to weaning in March 2004. The four dates of weighing and condition-scoring were joining (November), weaning (March), winter (June), and pre-calving (August). Calves were tagged, identified to their dam, and weighed within 24 h of birth, and at weaning. Date of calving, ICI and days from joining to calving were determined. The CS and LW of cows varied between years. LW increased in cows up to 6 years of age. Three-year-old cows had a longer ICI than older cows. Change in CS and LW from winter to pre-calving and pre-calving to joining were negatively correlated with ICI for younger cows but not for cows > or = 5 years (CS) and 6-8 years (LW) old. No difference in CS or LW precalving was evident between cows that subsequently became pregnant compared with non-pregnant cows, although cows that became pregnant gained more condition from pre-calving to joining than non-pregnant cows. Pregnant cows were heavier and had higher CS at joining than non-pregnant cows. Young cows, up to second-mating as 3-year-olds, would benefit from separate nutritional management from older cows, to ensure ICI and days to conception are kept at targeted levels. In addition, increasing CS from pre-calving to joining and higher LW and CS at joining resulted in higher pregnancy rates.

Physician participation in alternative health plans

PubMed Central

Rosenbach, Margo L.; Harrow, Brooke S.; Hurdle, Sylvia

1988-01-01

In this article, physician participation in alternative health plans is examined, using cross-sectional data from the Physicians' Practice Costs and Income Survey, 1983-85. Overall, about one-third of physicians participated in one or more plans, ranging from 18 percent of general practitioners to 46 percent of medical subspecialists. Only 19 percent, however, received income from prepaid sources, averaging $5,275 per physician. Reasons for joining or not joining are also examined. Participants joined most often to maintain or increase workload, while nonparticipants most often declined to join because they would be giving up independence. PMID:10312633

[Early prenatal diagnosis of diprosopic syncephalic joined twins].

PubMed

Picaud, A; Nlome-Nze, A R; Engongha-Beka, T; Ogowet-Igumu, N

1990-06-01

The authors summarize the case of diprosopic syncephalic joined twins diagnosed at 22 weeks of pregnancy by ultrasonography performed because of hydramnios. The rate of separation anomalies of monozygotic twins is assessed by a review of the literature: from 1 to twenty to fifty thousands for joined twins to 1 per cent fifty thousand to fifteen millions for diprosopus. The etiology is the result of a late division of the egg between D12 and D16. Often an encephalic diprosopic joined twins cause elevated levels of maternal serum alpha protein. Early ultrasonography permits to consider a vaginal therapeutic abortion.

Performing a global barrier operation in a parallel computer

DOEpatents

Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

2014-12-09

Executing computing tasks on a parallel computer that includes compute nodes coupled for data communications, where each compute node executes tasks, with one task on each compute node designated as a master task, including: for each task on each compute node until all master tasks have joined a global barrier: determining whether the task is a master task; if the task is not a master task, joining a single local barrier; if the task is a master task, joining the global barrier and the single local barrier only after all other tasks on the compute node have joined the single local barrier.

Laser beam joining of optical fibers in silicon V-grooves

NASA Astrophysics Data System (ADS)

Kaufmann, Stefan; Otto, Andreas; Luz, Gerhard

2000-06-01

The increasing use of optical data transmission systems and the development of new optical components require adjustment-insensitive and reliable joining and assembling techniques. The state of the art includes the utilization of silicon submounts with anisotropically etched V-grooves. Several glass fibers are fixed in these V-grooves with adhesive. Adhesive bonds tend towards degradation under the influence of temperature and moisture. For this reason, the alternative joining processes laser beam welding and laser beam soldering are relevant. The goal is a reliable joining of optical fibers in V-grooves without damage to the fibers or the silicon submount. Because of the anomaly of silicon during phase transformation, a positive joining can be realized by laser beam welding. A melt pool is created through the energy of a Nd:YAG-laser pulse. During solidification, the volume of silicon increases and a bump is formed in the center. Experiments have shown that this phenomenon can be used for joining optical fibers in silicon-V-grooves. With suitable parameters the silicon flows half around the fiber during solidification. For each fiber, several welding points are necessary. Another promising joining method is laser bema soldering. In this case, a second silicon sheet with a solder deposit is placed on the fibers which lie in the V-grooves of the metallized silicon submount. The laser heats the upper silicon until the solder metals by heat conduction.

Application Layer Multicast

NASA Astrophysics Data System (ADS)

Allani, Mouna; Garbinato, Benoît; Pedone, Fernando

An increasing number of Peer-to-Peer (P2P) Internet applications rely today on data dissemination as their cornerstone, e.g., audio or video streaming, multi-party games. These applications typically depend on some support for multicast communication, where peers interested in a given data stream can join a corresponding multicast group. As a consequence, the efficiency, scalability, and reliability guarantees of these applications are tightly coupled with that of the underlying multicast mechanism.

One-to-one midwifery.

PubMed

Farmer, E; Chipperfield, C

1996-04-01

Key elements: Problems of One-to-One midwifery developing a caseload relationships with other staff--perceived 'elitism' boundaries of care for high-risk mothers long hours isolation women's unrealistic expectations of midwife, including overdependence Solutions maintain dialogue with other professionals hospital midwives invited to join OTO midwives on community visits clarify roles and responsibilities direct referral to on-call registrar partnerships with teams peer support weekly group meeting empowering women, reducing overdependence

Flexible Weaving: Investigating the Teaching and Learning Opportunities in the Practices of Theatre-Makers and Performers from Selected Townships in Cape Town

ERIC Educational Resources Information Center

Morris, Gay

2013-01-01

In 2005-2009, the author researched the theatre-making practices of young people in selected black townships near Cape Town, South Africa. Township theatre groups comprised secondary school learners and out-of-school youth who join together to learn about and make theatre, perform and watch each other. These theatre practitioners do not describe…

The European Union’s Reform Process: The Libson Treaty

DTIC Science & Technology

2010-02-22

group: Denmark, Ireland, and the United Kingdom joined in 1973; Greece in 1981; Portugal and Spain in 1986; and Austria, Finland , and Sweden in 1995...1 The member countries of the EU are Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland ... double majority” system is to be introduced in 2014 (instead of 2009-2010), gradually phased in over three years, and not fully implemented until

26 CFR 1.1502-15 - SRLY limitation on built-in losses.

Code of Federal Regulations, 2013 CFR

2013-04-01

... the P group. (iii) Under section 382(h)(3)(A), T has a $35 net unrealized built-in loss on becoming a... has a net unrealized built-in loss under section 382(h)(3) is determined as if the day T joined the P... unrealized built-in loss of the P/P1 subgroup exceeds the threshold requirement under section 382(h)(3)(B), M...

26 CFR 1.1502-15 - SRLY limitation on built-in losses.

Code of Federal Regulations, 2011 CFR

2011-04-01

... the P group. (iii) Under section 382(h)(3)(A), T has a $35 net unrealized built-in loss on becoming a... has a net unrealized built-in loss under section 382(h)(3) is determined as if the day T joined the P... unrealized built-in loss of the P/P1 subgroup exceeds the threshold requirement under section 382(h)(3)(B), M...

26 CFR 1.1502-15 - SRLY limitation on built-in losses.

Code of Federal Regulations, 2014 CFR

2014-04-01

... the P group. (iii) Under section 382(h)(3)(A), T has a $35 net unrealized built-in loss on becoming a... has a net unrealized built-in loss under section 382(h)(3) is determined as if the day T joined the P... unrealized built-in loss of the P/P1 subgroup exceeds the threshold requirement under section 382(h)(3)(B), M...

26 CFR 1.1502-15 - SRLY limitation on built-in losses.

Code of Federal Regulations, 2012 CFR

2012-04-01

... the P group. (iii) Under section 382(h)(3)(A), T has a $35 net unrealized built-in loss on becoming a... has a net unrealized built-in loss under section 382(h)(3) is determined as if the day T joined the P... unrealized built-in loss of the P/P1 subgroup exceeds the threshold requirement under section 382(h)(3)(B), M...

Make or Buy: A Systematic Approach to Department of Defense Sourcing Decisions

DTIC Science & Technology

2013-07-30

Defense-Industrial Initiatives Group at CSIS, where he worked on projects related to U.S. and European technology and industrial bases supporting defense...Prior to joining CSIS, Mr. Ben-Ari was a research associate at George Washington University’s Center for International Science and Technology ...collaborative research and development programs for Gilat Satellite Networks Ltd., an Israeli high- technology company in the field of satellite

The GGOS Global Space Geodesy Network and its Evolution

NASA Astrophysics Data System (ADS)

Pearlman, M. R.; Pavlis, E. C.; Ma, C.; Noll, C. E.; Neilan, R. E.; Stowers, D. A.; Wetzel, S.

2013-12-01

The improvements in the reference frame and other space geodesy data products spelled out in the GGOS 2020 plan will evolve over time as new space geodesy sites enhance the global distribution of the network and new technologies are implemented at the sites thus enabling improved data processing and analysis. The goal of 30 globally distributed core sites with VLBI, SLR, GNSS and DORIS (where available) will take time to materialize. Co-location sites with less than the full core complement will continue to play a very important role in filling out the network while it is evolving and even after full implementation. GGOS through its Call for Participation, bi-lateral and multi-lateral discussions and work through the IAG Services has been encouraging current groups to upgrade and new groups to join the activity. Simulations examine the projected accuracy and stability of the network that would exist in five- and ten-years time, were the proposed expansion to fully materialize by then. Over the last year additional sites have joined the GGOS network, and ground techniques have continued to make progress in new technology systems. This talk will give an update on the current expansion of the global network and the projection for the network configuration that we forecast over the next 10 years.

Brokers, consumers and the internet: how North American consumers navigate their infertility journeys.

PubMed

Speier, Amy R

2011-11-01

North Americans who suffer infertility often reach an end to treatment options at home, whether it is due to a lack of egg donors in Canada or the high cost of treatment in the USA. Patients navigate their way onto the internet, seeking support and other options. As women and couples 'do the research' online, they conduct endless Google searches, come across IVF brokers, join support groups, read blogs and meet others on the road of infertility. This paper considers the journeys that North American patients make to clinics in Moravia, Czech Republic. Along these travels, patients engage with support groups, other patients, IVF brokers and clinic co-ordinators. Since the distance travelled between North America and Europe is extensive, reproductive travels may be arranged by clinical staff, travel brokers and patients. Acting as consumers, North Americans make different 'choices' along their journeys – the use of a broker, if and when they should join online communities, which clinic to visit and where to stay. This study focuses on the question of how patient choices often determine the success of brokers and clinics, thus influencing the structure of cross-border reproductive care in the Czech Republic. Copyright © 2011 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

IAU Commission 55: Communicating Astronomy with the Public

NASA Astrophysics Data System (ADS)

Fienberg, R. T.; Christensen, L. L.; Russo, P.

2014-01-01

The International Astronomical Union (IAU) has vested considerable responsibility for its public outreach efforts in Commission 55 (C55), Communicating Astronomy with the Public. This article briefly recounts the origin and history of C55 over the past decade, describing how C55 fits into the IAU's recently revised organisational structure and newly implemented Strategic Plan. It also lists C55's current officers, Organising Committee members, Working Groups, and Working Group chairs and explains how IAU members can join C55, inviting other professionals engaged in astronomy-related public outreach to become associates of C55.

Some final thoughts

NASA Astrophysics Data System (ADS)

Frame, Michael

2015-03-01

One afternoon Benoit invited me to a master's tea in his college at Yale. He and a group of colleagues discussed opera, the distribution of galaxies, Hokusai's art, Stoppard's Arcadia, many other topics. Despite the conversation's swerves, Benoit contributed detailed opinions to each new direction. When he excused himself to speak with someone on the other side of the room, a diminuitive Cuban poet who joined the group late turned to me, clearly Benoit's guest, and asked, "Who is that enormous man?" Before I could reply, another said, "Oh, that's Benoit Mandelbrot. He reinvented geometry." "Ah, a scientist. Then why does he know opera and art?"...

NASA Chief Technologist Douglas Terrier Tours Jacobs' Engineering Development Facility

NASA Image and Video Library

2017-08-10

NASA Chief Technologist Douglas Terrier joins Jacobs General Manager Lon Miller during a tour of the company's Engineering Development Facility in Houston. Jacobs provides advanced technologies used aboard the International Space Station and for deep space exploration. From left: NASA’s Johnson Space Center Chief Technologist Chris Culbert, Chief Technologist Douglas Terrier, Jacobs Clear Lake Group Deputy General Manager Joy Kelly and Jacobs Clear Lake Group General Manager Lon Miller. Date: 08-10-2017 Location: B1 & Jacobs Engineering Subject: NASA Acting Chief Technology Officer Douglas Terrier Tours JSC and Jacobs Photographer: David DeHoyos

When science meets capitalism

NASA Astrophysics Data System (ADS)

Parker, Greg

2008-03-01

When I joined the University of Southampton's microelectronics group in 1987 after spending 10 years in industry, I shared some of my commercial ideas for advancing the group into the 21st century with my academic colleagues. To say that my personal vision of paradise was close to their vision of hell is probably a pretty accurate observation. Two decades on, I now understand why they felt that way. Science for Sale contains a lot of information that explains this vast difference in perception, and the book also does a good job of highlighting how academia and industry differ on practical and ethical levels.

News Release: USDA Joins Fair Food Network, State and Local Partners to

Science.gov Websites

Promote Nutrition Resources for Lead-Affected Flint Residents - PHE You may be trying to access Joins Fair Food Network, State and Local Partners to Promote Nutrition Resources for Lead-Affected Flint Residents News Release: USDA Joins Fair Food Network, State and Local Partners to Promote Nutrition

Recovery Potential of a Western Lowland Gorilla Population following a Major Ebola Outbreak: Results from a Ten Year Study

PubMed Central

Gatti, Sylvain; Levréro, Florence; Bigot, Elodie; Caillaud, Damien; Pierre, Jean-Sébastien; Ménard, Nelly

2012-01-01

Investigating the recovery capacity of wildlife populations following demographic crashes is of great interest to ecologists and conservationists. Opportunities to study these aspects are rare due to the difficulty of monitoring populations both before and after a demographic crash. Ebola outbreaks in central Africa have killed up to 95% of the individuals in affected western lowland gorilla (Gorilla gorilla gorilla) populations. Assessing whether and how fast affected populations recover is essential for the conservation of this critically endangered taxon. The gorilla population visiting Lokoué forest clearing, Odzala-Kokoua National Park, Republic of the Congo, has been monitored before, two years after and six years after Ebola affected it in 2004. This allowed us to describe Ebola's short-term and long-term impacts on the structure of the population. The size of the population, which included around 380 gorillas before the Ebola outbreak, dropped to less than 40 individuals after the outbreak. It then remained stable for six years after the outbreak. However, the demographic structure of this small population has significantly changed. Although several solitary males have disappeared, the immigration of adult females, the formation of new breeding groups, and several birth events suggest that the population is showing potential to recover. During the outbreak, surviving adult and subadult females joined old solitary silverbacks. Those females were subsequently observed joining young silverbacks, forming new breeding groups where they later gave birth. Interestingly, some females were observed joining silverbacks that were unlikely to have sired their infant, but no infanticide was observed. The consequences of the Ebola outbreak on the population structure were different two years and six years after the outbreak. Therefore, our results could be used as demographic indicators to detect and date outbreaks that have happened in other, non-monitored gorilla populations. PMID:22649511

Recovery potential of a western lowland gorilla population following a major Ebola outbreak: results from a ten year study.

PubMed

Genton, Céline; Cristescu, Romane; Gatti, Sylvain; Levréro, Florence; Bigot, Elodie; Caillaud, Damien; Pierre, Jean-Sébastien; Ménard, Nelly

2012-01-01

Investigating the recovery capacity of wildlife populations following demographic crashes is of great interest to ecologists and conservationists. Opportunities to study these aspects are rare due to the difficulty of monitoring populations both before and after a demographic crash. Ebola outbreaks in central Africa have killed up to 95% of the individuals in affected western lowland gorilla (Gorilla gorilla gorilla) populations. Assessing whether and how fast affected populations recover is essential for the conservation of this critically endangered taxon. The gorilla population visiting Lokoué forest clearing, Odzala-Kokoua National Park, Republic of the Congo, has been monitored before, two years after and six years after Ebola affected it in 2004. This allowed us to describe Ebola's short-term and long-term impacts on the structure of the population. The size of the population, which included around 380 gorillas before the Ebola outbreak, dropped to less than 40 individuals after the outbreak. It then remained stable for six years after the outbreak. However, the demographic structure of this small population has significantly changed. Although several solitary males have disappeared, the immigration of adult females, the formation of new breeding groups, and several birth events suggest that the population is showing potential to recover. During the outbreak, surviving adult and subadult females joined old solitary silverbacks. Those females were subsequently observed joining young silverbacks, forming new breeding groups where they later gave birth. Interestingly, some females were observed joining silverbacks that were unlikely to have sired their infant, but no infanticide was observed. The consequences of the Ebola outbreak on the population structure were different two years and six years after the outbreak. Therefore, our results could be used as demographic indicators to detect and date outbreaks that have happened in other, non-monitored gorilla populations.

Explosive Joining for the Mars Sample Return Mission

NASA Technical Reports Server (NTRS)

Bement, Laurence J.; Sanok, Joseph T.

2000-01-01

A unique, small-scale, ribbon explosive joining process is being developed as an option for closing and sealing a metal canister to allow the return of a pristine sample of the Martian surface and atmosphere to Earth. This joining process is accomplished by an explosively driven, high-velocity, angular collision of the metal, which melts and effaces the oxide films from the surfaces to allow valence electron sharing to bond the interface. Significant progress has been made through more than 100 experimental tests to meet the goals of this ongoing developmental effort. The metal of choice, aluminum alloy 6061, has been joined in multiple interface configurations and in complete cylinders. This process can accommodate dust and debris on the surfaces to be joined. It can both create and sever a joint at its midpoint with one explosive input. Finally, an approach has been demonstrated that can capture the back blast from the explosive.

Mapping X-Disease Phytoplasma Resistance in Prunus virginiana

PubMed Central

Lenz, Ryan R.; Dai, Wenhao

2017-01-01

Phytoplasmas such as “Candidatus Phytoplasma pruni,” the causal agent of X-disease of stone fruits, lack detailed biological analysis. This has limited the understanding of plant resistance mechanisms. Chokecherry (Prunus virginiana L.) is a promising model to be used for the plant-phytoplasma interaction due to its documented ability to resist X-disease infection. A consensus chokecherry genetic map “Cho” was developed with JoinMap 4.0 by joining two parental maps. The new map contains a complete set of 16 linkage groups, spanning a genetic distance of 2,172 cM with an average marker density of 3.97 cM. Three significant quantitative trait loci (QTL) associated with X-disease resistance were identified contributing to a total of 45.9% of the phenotypic variation. This updated genetic linkage map and the identified QTL will provide the framework needed to facilitate molecular genetics, genomics, breeding, and biotechnology research concerning X-disease in chokecherry and other Prunus species. PMID:29238359

The fine structure of the rectal pads of Zorotypus caudelli Karny (Zoraptera, Insecta).

PubMed

Dallai, R; Mercati, D; Mashimo, Y; Machida, R; Beutel, R G

2016-07-01

The rectal pads of a species of the controversial polyneopteran order Zoraptera were examined using histological sections and TEM micrographs. Six pads are present along the thin rectal epithelium. Each pad consists of a few large principal cells surrounded by flattened junctional cells, which extend also beneath the principal cells. The cells are lined by a thin apical cuticle. No basal cells and no cavity have been observed beneath the pad. Principal cells have a regular layer of apical microvilli and are joined by intercellular septate junctions, which are interrupted by short dilatations of the intercellular space. At these levels the two adjacent plasma membranes are joined by short zonulae adhaerentes. In the cytoplasm, a rich system of strict associations between lateral plasma membranes and mitochondria forms scalariform junctions. Rectal pads share ultrastructural features with similar excretory organs of several neopteran groups, in particular with Blattodea (roaches and termites) and Thysanoptera, and are involved in fluid reabsorption and ion regulation. Copyright © 2016 Elsevier Ltd. All rights reserved.

For free or for fee? Dilemma of small scientific journals.

PubMed

Kljaković-Gaspić, Marko; Petrak, Jelka; Rudan, Igor; Biloglav, Zrinka

2007-06-01

Biomedical publishing is becoming increasingly dominated by multinational companies, advertising research articles at the international market, presenting them electronically through web-based services, and distributing them to readers-consumers. It seems that they will soon become the sole publishers for the majority of biomedical journals. In the past decade, however, we witnessed a quiet revolution in the whole structure of scientific communication, influenced by new technologies and initiatives such as Open Access, PubMedCentral, PLoS, and BioMedCentral. The Croatian Medical Journal (CMJ) has recently been approached by two major publishing companies and offered to become one of the journals in their group. The editorial decision was to join neither of the publishers. We felt that the decision had to be explained to our readers by defining CMJ's position in global scientific and medical journal publishing. Our experience may be similar to that of the many biomedical journals which find themselves in a dilemma whether to join major publishers or not.

Indian oil company joins efforts to reduce methane emissions

NASA Astrophysics Data System (ADS)

Kumar, Mohi

The Oil and Natural Gas Corp, Ltd. (ONGC), headquartered in Dehradun, India, has joined seven U.S. and Canadian oil and natural gas companies as a partner in a U.S. Environmental Protection Agency program to reduce greenhouse gas emissions. EPA's Natural Gas STAR International Program aims to reduce methane emissions from the oil and natural gas sector while delivering more gas to markets around the world. With this partnership, ONGC agrees to implement emissions reduction practices and to submit annual reports on progress achieved; EPA agrees to assist ONGC with training technicians in new cost-effective technologies that will help achieve target emissions. The Natural Gas STAR International Program is administered under the Methane to Markets Partnership, a group of 20 countries and 600 companies across the globe that since 2004 has volunteered to cut methane emissions. More information on EPA's agreement with ONGC can be found at http://www.epa.gov/gasstar/index.htm; information about the Methane to Markets Partnership can be found at http://www.methanetomarkets.org.

Evaluating Engagement Models for a Citizen Science Project: Lessons Learned From Four Years of Nature's Notebook

NASA Astrophysics Data System (ADS)

Crimmins, T. M.; Rosemartin, A.

2012-12-01

The success of citizen science programs hinges on their abilities to recruit and maintain active participants. The USA National Phenology Network's plant and animal phenology observation program, Nature's Notebook, has been active since 2009. This program engages thousands of citizen scientists in tracking plant and animal life cycle activity over the course of the year. We embarked on an evaluation of the various observer recruitment and retention tactics that we have employed over the ~4-year life of this program to better inform future outreach efforts specific to Nature's Notebook and for the broader citizen science community. Participants in Nature's Notebook may become engaged via one of three pathways: individuals may join Nature's Notebook directly, they may be invited to join through a USA-NPN partner organization, or they may engage through a group with local, site-based leadership. The level and type of recruitment tactics, training, and retention efforts that are employed varies markedly among these three models. In this evaluation, we compared the efficacy of these three engagement models using several metrics: number of individuals recruited, number of individuals that go on to submit at least one data point, retention rates over time, duration of activity, and quantity of data points submitted. We also qualitatively considered the differences in costs the three models require to support. In terms of recruitment, direct engagement yielded 20-100 times more registrants than other two models. In contrast, rates of participation were highest for site-based leadership (>35%, versus 20-30% for direct engagement; rates for partner organizations were highly variable due to small sample sizes). Individuals participating through partners with site-based leadership showed a much higher rate of retention (41% of participants remained active for two+ years) than those participating directly in Nature's Notebook (27% of participants remained active for two+ years) or individuals participating through membership organizations (12% of participants remained active for two+ years). Long-term observer retention was significantly higher for participants that joined via groups with site-based leadership compared to observers that joined Nature's Notebook directly in 2010 and 2011 (direct-engagement observers remained active for ~4 months; observers in groups with site-based leaderships remained active for ~6 months). There were no differences in within-year retention among the three models, indicating that the approaches perform essentially equally in terms of keeping observers engaged within the year of registration. In both 2011 and 2012 (to-date), observers participating via groups with site-based leadership submitted over twice the observations than observers participating directly in Nature's Notebook. Through this evaluation, we learned that direct engagement, which costs the USA-NPN the least to undertake and maintain, yields the greatest number of program registrants. However, this model results in the lowest rates of participant retention and data submission. In contrast, programs with site-based leadership, such as local Master Gardener chapters, yield the longest durations of activity and much higher rates of data submission, but are much more labor-intensive to support.

The Transformation of Children's Services: Examining and Debating the Complexities of Inter/Professional Working

ERIC Educational Resources Information Center

Forbes, Joan, Ed.; Watson, Cate, Ed.

2011-01-01

Can we imagine different ways of working together to secure better outcomes for children and families? What are the complex issues that underlie the apparently simple call for "joined-up" services? Children's services in many countries around the world are being transformed as part of the call for "joined-up working for joined-up…

Joining of parts via magnetic heating of metal aluminum powders

DOEpatents

Baker, Ian

2013-05-21

A method of joining at least two parts includes steps of dispersing a joining material comprising a multi-phase magnetic metal-aluminum powder at an interface between the at least two parts to be joined and applying an alternating magnetic field (AMF). The AMF has a magnetic field strength and frequency suitable for inducing magnetic hysteresis losses in the metal-aluminum powder and is applied for a period that raises temperature of the metal-aluminum powder to an exothermic transformation temperature. At the exothermic transformation temperature, the metal-aluminum powder melts and resolidifies as a metal aluminide solid having a non-magnetic configuration.

Method and apparatus for welding precipitation hardenable materials

DOEpatents

Murray, Jr., Holt; Harris, Ian D.; Ratka, John O.; Spiegelberg, William D.

1994-01-01

A method for welding together members consisting of precipitation age hardened materials includes the steps of selecting a weld filler material that has substantially the same composition as the materials being joined, and an age hardening characteristic temperature age threshold below that of the aging kinetic temperature range of the materials being joined, whereby after welding the members together, the resulting weld and heat affected zone (HAZ) are heat treated at a temperature below that of the kinetic temperature range of the materials joined, for obtaining substantially the same mechanical characteristics for the weld and HAZ, as for the parent material of the members joined.

Method and apparatus for welding precipitation hardenable materials

DOEpatents

Murray, H. Jr.; Harris, I.D.; Ratka, J.O.; Spiegelberg, W.D.

1994-06-28

A method for welding together members consisting of precipitation age hardened materials includes the steps of selecting a weld filler material that has substantially the same composition as the materials being joined, and an age hardening characteristic temperature age threshold below that of the aging kinetic temperature range of the materials being joined, whereby after welding the members together, the resulting weld and heat affected zone (HAZ) are heat treated at a temperature below that of the kinetic temperature range of the materials joined, for obtaining substantially the same mechanical characteristics for the weld and HAZ, as for the parent material of the members joined. 5 figures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shaw, L. A.; Chizari, S.; Panas, R. M.

The aim of this research is to demonstrate a holographically driven photopolymerization process for joining colloidal particles to create planar microstructures fixed to a substrate, which can be monitored with real-time measurement. Holographic optical tweezers (HOT) have been used to arrange arrays of microparticles prior to this work; here we introduce a new photopolymerization process for rapidly joining simultaneously handled microspheres in a plane. Additionally, we demonstrate a new process control technique for efficiently identifying when particles have been successfully joined by measuring a sufficient reduction in the particles’ Brownian motion. Furthermore, this technique and our demonstrated joining approach enablemore » HOT technology to take critical steps toward automated additive fabrication of microstructures.« less

Method of joining metallic and composite components

NASA Technical Reports Server (NTRS)

Semmes, Edmund B. (Inventor)

2010-01-01

A method is provided for joining a metallic member to a structure made of a composite matrix material. One or more surfaces of a portion of the metallic member that is to be joined to the composite matrix structure is provided with a plurality of outwardly projecting studs. The surface including the studs is brought into engagement with a portion of an uncured composite matrix material so that fibers of the composite matrix material intertwine with the studs, and the metallic member and composite structure form an assembly. The assembly is then companion cured so as to join the metallic member to the composite matrix material structure.

Laser beam soldering of micro-optical components

NASA Astrophysics Data System (ADS)

Eberhardt, R.

2003-05-01

MOTIVATION Ongoing miniaturisation and higher requirements within optical assemblies and the processing of temperature sensitive components demands for innovative selective joining techniques. So far adhesive bonding has primarily been used to assemble and adjust hybrid micro optical systems. However, the properties of the organic polymers used for the adhesives limit the application of these systems. In fields of telecommunication and lithography, an enhancement of existing joining techniques is necessary to improve properties like humidity resistance, laserstability, UV-stability, thermal cycle reliability and life time reliability. Against this background laser beam soldering of optical components is a reasonable joining technology alternative. Properties like: - time and area restricted energy input - energy input can be controlled by the process temperature - direct and indirect heating of the components is possible - no mechanical contact between joining tool and components give good conditions to meet the requirements on a joining technology for sensitive optical components. Additionally to the laser soldering head, for the assembly of optical components it is necessary to include positioning units to adjust the position of the components with high accuracy before joining. Furthermore, suitable measurement methods to characterize the soldered assemblies (for instance in terms of position tolerances) need to be developed.

Robust Joining and Integration Technologies for Advanced Metallic, Ceramic, and Composite Systems

NASA Technical Reports Server (NTRS)

Singh, M.; Shpargel, Tarah; Morscher, Gregory N.; Halbig, Michael H.; Asthana, Rajiv

2006-01-01

Robust integration and assembly technologies are critical for the successful implementation of advanced metallic, ceramic, carbon-carbon, and ceramic matrix composite components in a wide variety of aerospace, space exploration, and ground based systems. Typically, the operating temperature of these components varies from few hundred to few thousand Kelvin with different working times (few minutes to years). The wide ranging system performance requirements necessitate the use of different integration technologies which includes adhesive bonding, low temperature soldering, active metal brazing, diffusion bonding, ARCJoinT, and ultra high temperature joining technologies. In this presentation, a number of joining examples and test results will be provided related to the adhesive bonding and active metal brazing of titanium to C/C composites, diffusion bonding of silicon carbide to silicon carbide using titanium interlayer, titanium and hastelloy brazing to silicon carbide matrix composites, and ARCJoinT joining of SiC ceramics and SiC matrix composites. Various issues in the joining of metal-ceramic systems including thermal expansion mismatch and resulting residual stresses generated during joining will be discussed. In addition, joint design and testing issues for a wide variety of joints will be presented.

Affordable, Robust Ceramic Joining Technology (ARCJoinT) for High Temperature Applications

NASA Technical Reports Server (NTRS)

Singh, M.

1998-01-01

Ceramic joining is recognized as one of the enabling technologies for the successful utilization of silicon carbide-based monolithic ceramic and fiber reinforced composite components in a number of demanding and high temperature applications in aerospace and ground-based systems. An affordable, robust ceramic joining technology (ARCJoinT) for joining of silicon carbide-based ceramics and fiber reinforced composites has been developed. This technique is capable of producing joints with tailorable thickness and composition. A wide variety of silicon carbide-based ceramics and composites, in different shapes and sizes, have been joined using this technique. The room and high temperature mechanical properties and fractography of ceramic joints have been reported. In monolithic silicon carbide ceramics, these joints maintain their mechanical strength up to 1350 C in air. There is no change in the mechanical strength of joints in silicon carbide matrix composites up to 1200 C in air. In composites, simple butt joints yield only about 20% of the ultimate strength of the parent materials. This technology is suitable for the joining of large and complex shaped ceramic and composite components, and with certain modifications, can be applied to repair of ceramic components damaged in service.

Ad-Hoc Queries over Document Collections - A Case Study

NASA Astrophysics Data System (ADS)

Löser, Alexander; Lutter, Steffen; Düssel, Patrick; Markl, Volker

We discuss the novel problem of supporting analytical business intelligence queries over web-based textual content, e.g., BI-style reports based on 100.000's of documents from an ad-hoc web search result. Neither conventional search engines nor conventional Business Intelligence and ETL tools address this problem, which lies at the intersection of their capabilities. "Google Squared" or our system GOOLAP.info, are examples of these kinds of systems. They execute information extraction methods over one or several document collections at query time and integrate extracted records into a common view or tabular structure. Frequent extraction and object resolution failures cause incomplete records which could not be joined into a record answering the query. Our focus is the identification of join-reordering heuristics maximizing the size of complete records answering a structured query. With respect to given costs for document extraction we propose two novel join-operations: The multi-way CJ-operator joins records from multiple relationships extracted from a single document. The two-way join-operator DJ ensures data density by removing incomplete records from results. In a preliminary case study we observe that our join-reordering heuristics positively impact result size, record density and lower execution costs.

Aeroelastic tailoring and structural optimization of joined-wing configurations

NASA Astrophysics Data System (ADS)

Lee, Dong-Hwan

2002-08-01

Methodology for integrated aero-structural design was developed using formal optimization. ASTROS (Automated STRuctural Optimization System) was used as an analyzer and an optimizer for performing joined-wing weight optimization with stress, displacement, cantilever or body-freedom flutter constraints. As a pre/post processor, MATLAB was used for generating input file of ASTROS and for displaying the results of the ASTROS. The effects of the aeroelastic constraints on the isotropic and composite joined-wing weight were examined using this developed methodology. The aeroelastic features of a joined-wing aircraft were examined using both the Rayleigh-Ritz method and a finite element based aeroelastic stability and weight optimization procedure. Aircraft rigid-body modes are included to analyze of body-freedom flutter of the joined-wing aircraft. Several parametric studies were performed to determine the most important parameters that affect the aeroelastic behavior of a joined-wing aircraft. The special feature of a joined-wing aircraft is body-freedom flutter involving frequency interaction of the first elastic mode and the aircraft short period mode. In most parametric study cases, the body-freedom flutter speed was less than the cantilever flutter speed that is independent of fuselage inertia. As fuselage pitching moment of inertia was increased, the body-freedom flutter speed increased. When the pitching moment of inertia reaches a critical value, transition from body-freedom flutter to cantilever flutter occurred. The effects of composite laminate orientation on the front and rear wings of a joined-wing configuration were studied. An aircraft pitch divergence mode, which occurred because of forward movement of center of pressure due to wing deformation, was found. Body-freedom flutter and cantilever-like flutter were also found depending on combination of front and rear wing ply orientations. Optimized wing weight behaviors of the planar and non-planar configurations with isotropic and composite materials were investigated. Wing weight optimization of the composite joined-wing result in less weight compared to the metallic wing. Fuselage flexibility affects joined-wing flutter characteristics. Elastic mode shapes of the wing were affected by fuselage deformation and change the flutter speeds compared to the rigid fuselage. Body-freedom flutter speeds decrease as fuselage flexibility increases. Optimum wing weights increase as fuselage flexibility increases. Flutter analysis of a box wing configuration investigated the effects of center of gravity location and pitch moment of inertia on flutter speed.

Cut and join operator ring in tensor models

NASA Astrophysics Data System (ADS)

Itoyama, H.; Mironov, A.; Morozov, A.

2018-07-01

Recent advancement of rainbow tensor models based on their superintegrability (manifesting itself as the existence of an explicit expression for a generic Gaussian correlator) has allowed us to bypass the long-standing problem seen as the lack of eigenvalue/determinant representation needed to establish the KP/Toda integrability. As the mandatory next step, we discuss in this paper how to provide an adequate designation to each of the connected gauge-invariant operators that form a double coset, which is required to cleverly formulate a tree-algebra generalization of the Virasoro constraints. This problem goes beyond the enumeration problem per se tied to the permutation group, forcing us to introduce a few gauge fixing procedures to the coset. We point out that the permutation-based labeling, which has proven to be relevant for the Gaussian averages is, via interesting complexity, related to the one based on the keystone trees, whose algebra will provide the tensor counterpart of the Virasoro algebra for matrix models. Moreover, our simple analysis reveals the existence of nontrivial kernels and co-kernels for the cut operation and for the join operation respectively that prevent a straightforward construction of the non-perturbative RG-complete partition function and the identification of truly independent time variables. We demonstrate these problems by the simplest non-trivial Aristotelian RGB model with one complex rank-3 tensor, studying its ring of gauge-invariant operators, generated by the keystone triple with the help of four operations: addition, multiplication, cut and join.

Lee C. Bradley III (Phillips Exeter Class of 1943): Physicist, Officer, and Gentleman

NASA Astrophysics Data System (ADS)

Cardon, Bartley L.

2004-03-01

Lee Carrington Bradley's career as a physicist began as an accomplished student at Phillips Exeter Academy, where he was influenced by Professor John C. Hogg, chairman of the Science Department. He graduated in 1943 and entered the V-12 program for naval officers and completed his undergraduate degree in physics at Princeton University. After a brief tour as a Navy Ensign he joined the first group of American Rhodes Scholars to attend Oxford University, in 1947, following the conclusion of World War II. Under the guidance of H.G. Kuhn of Clarendon Laboratory, Lee completed his Ph.D. in physics in 1950. He then accepted an instructorship in physics at Princeton until he was called to MIT as an assistant professor in 1954 and later as a research associate in the Harrison Spectroscopy Laboratory. In 1966 he joined the technical staff of MIT Lincoln Laboratory, and became a senior staff member in 1978, a position he held until his retirement in 1992. From 1947 to 1966 Lee's interest was primarily in the field of optical spectroscopy, where his work brought him into contact with many of the outstanding physicists of his era. Upon joining Lincoln Laboratory, his physics interests shifted toward optics and laser propagation, the latter a field in which he made significant contributions. My illustrated tribute will discuss Lee's passage from Phillips Exeter to Lincoln Laboratory, describing his physics and some of the notable physicists with whom he worked.

Suppression of Non-Homologous End Joining Repair by Overexpression of HMGA2

PubMed Central

Li, Angela Y.J.; Boo, Lee Ming; Wang, Shih-Ya; Lin, H. Helen; Wang, Clay C.C.; Yen, Yun; Chen, Benjamin P.C.; Chen, David J.; Ann, David K.

2009-01-01

Understanding the molecular details associated with aberrant high mobility group A2 (HMGA2) gene expression is key to establishing the mechanism(s) underlying its oncogenic potential and impact on the development of therapeutic strategies. Here, we report the involvement of HMGA2 in impairing DNA-dependent protein kinase (DNA-PK) during the non-homologous end joining (NHEJ) process. We demonstrated that HMGA2-expressing cells displayed deficiency in overall and precise DNA end-joining repair and accumulated more endogenous DNA damage. Proper and timely activation of DNA-PK, consisting of Ku70, Ku80 and DNA-PKcs subunits, is essential for the repair of DNA double strand breaks (DSBs) generated endogenously or by exposure to genotoxins. In cells overexpressing HMGA2, accumulation of histone 2A variant X phosphorylation at Ser-139 (γ-H2AX) was associated with hyper-phosphorylation of DNA-PKcs at Thr-2609 and Ser-2056 before and after the induction of DSBs. Also, the steady-state complex of Ku and DNA ends was altered by HMGA2. Microirradiation and real-time imaging in living cells revealed that HMGA2 delayed the release of DNA-PKcs from DSB sites, similar to observations found in DNA-PKcs mutants. Moreover, HMGA2 alone was sufficient to induce chromosomal aberrations, a hallmark of deficiency in NHEJ-mediated DNA repair. In summary, a novel role for HMGA2 to interfere with NHEJ processes was uncovered, implicating HMGA2 in the promotion of genome instability and tumorigenesis. PMID:19549901

United Nations Global Compact: an 'Inroad' into the UN and reputation boost for the tobacco industry.

PubMed

van der Eijk, Yvette; McDaniel, Patricia A; Glantz, Stanton A; Bialous, Stella A

2017-11-02

The United Nations Global Compact (UNGC), a UN initiative to engage corporations in supporting the UN's mission, sets out principles that companies should follow for more ethical business practices. Since its inception in 2000, at least 13 tobacco companies, subsidiaries and tobacco industry affiliates joined the UNGC. In a September 2017 integrity review, the UNGC Board excluded from UNGC participation companies who derive revenue from tobacco production or manufacturing. To determine, from the tobacco industry's perspective, tobacco companies' motives for joining the UNGC. Tobacco industry documents search using the Truth Tobacco Industry Documents Library, and search of published reports and documents on the tobacco industry and the UNGC. Tobacco companies sought to join the UNGC for two reasons: (1) to improve their reputation, in keeping with other corporate social responsibility efforts; (2) to gain proximity to UN agencies and weaken the WHO's influence, part of an overall strategy to undermine the WHO Framework Convention on Tobacco Control. Excluding tobacco manufacturers from UNGC participation is an important step to limit the tobacco industry's ability to influence the UN and promote its image and, by extension, its deadly products. It is important to monitor enforcement of this policy and resist the engagement of tobacco industry front groups, such as industry-funded foundations, with the UNGC. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Preliminary study on the effectiveness of short group cognitive behavioral therapy (GCBT) on Indonesian older adults.

PubMed

Utoyo, Dharmayati Bambang; Lubis, Dharmayati Utoyo; Jaya, Edo Sebastian; Arjadi, Retha; Hanum, Lathifah; Astri, Kresna; Putri, Maha Decha Dwi

2013-01-01

This research aims to develop evidence based affordable psychological therapy for Indonesian older adults. An affordable psychological therapy is important as there is virtually no managed care or health insurance that covers psychological therapy in Indonesia. Multicomponent group cognitive behavior therapy (GCBGT) was chosen as a starting point due to its extensive evidence, short sessions, and success for a wide range of psychological problems. The group format was chosen to address both the economic and the cultural context of Indonesia. Then, the developed treatment is tested to common psychological problems in older adults' population (anxiety, chronic pain, depression, and insomnia). The treatment consists of 8 sessions with twice a week meetings for 2.5 hours. There are similarities and differences among the techniques used in the treatment for the different psychological problems. The final participants are 38 older adults that are divided into the treatment groups; 8 participants joined the anxiety treatment, 10 participants for the chronic pain treatment, 10 participants for depression treatment, and lastly, 10 participants joined the insomnia treatment. The research design is pre-test post-test with within group analysis. We used principal outcome measure that is specific for each treatment group, as well as additional outcome measures. Overall, the result shows statistical significance change with large effect size for the principal outcome measure. In addition, the result for the additional measures varies from slight improvement with small effect size to statistically significant improvement with large effect size. The result indicates that short multicomponent GCBT is effective in alleviating various common psychological problems in Indonesian older adults. Therefore, multicomponent GCBT may be a good starting point to develop an effective and affordable psychological therapy for Indonesian older adults. Lastly, this result adds to the accumulating body of evidence on the effectiveness of multicomponent GCBT outside western context.

Preliminary Study on the Effectiveness of Short Group Cognitive Behavioral Therapy (GCBT) on Indonesian Older Adults

PubMed Central

Lubis, Dharmayati Utoyo; Jaya, Edo Sebastian; Arjadi, Retha; Hanum, Lathifah; Astri, Kresna; Putri, Maha Decha Dwi

2013-01-01

This research aims to develop evidence based affordable psychological therapy for Indonesian older adults. An affordable psychological therapy is important as there is virtually no managed care or health insurance that covers psychological therapy in Indonesia. Multicomponent group cognitive behavior therapy (GCBGT) was chosen as a starting point due to its extensive evidence, short sessions, and success for a wide range of psychological problems. The group format was chosen to address both the economic and the cultural context of Indonesia. Then, the developed treatment is tested to common psychological problems in older adults' population (anxiety, chronic pain, depression, and insomnia). The treatment consists of 8 sessions with twice a week meetings for 2.5 hours. There are similarities and differences among the techniques used in the treatment for the different psychological problems. The final participants are 38 older adults that are divided into the treatment groups; 8 participants joined the anxiety treatment, 10 participants for the chronic pain treatment, 10 participants for depression treatment, and lastly, 10 participants joined the insomnia treatment. The research design is pre-test post-test with within group analysis. We used principal outcome measure that is specific for each treatment group, as well as additional outcome measures. Overall, the result shows statistical significance change with large effect size for the principal outcome measure. In addition, the result for the additional measures varies from slight improvement with small effect size to statistically significant improvement with large effect size. The result indicates that short multicomponent GCBT is effective in alleviating various common psychological problems in Indonesian older adults. Therefore, multicomponent GCBT may be a good starting point to develop an effective and affordable psychological therapy for Indonesian older adults. Lastly, this result adds to the accumulating body of evidence on the effectiveness of multicomponent GCBT outside western context. PMID:23437339

Effect of a Food Supplement Containing L-Methionine on Urinary Tract Infections in Pregnancy: A Prospective, Multicenter Observational Study.

PubMed

Passaro, Mario; Mainini, Giampaolo; Ambrosio, Francesco; Sgambato, Raimondo; Balbi, Giancarlo

2017-06-01

Adjuvants or alternatives to antibiotics in urinary tract infections (UTIs) during pregnancy seem advisable because of possible fetal stress. The present study assessed the effectiveness of a food supplement containing L-methionine and Hibiscus sabdariffa L. and Boswellia serrata Roxb. extracts as a treatment for symptomatic UTIs in pregnancy. Pregnant patients with symptomatic cystitis were screened for UTIs in three different clinical centers. Those unwilling to take antibiotics were offered two alternative treatments: (A) a 1-week treatment with the food supplement or (B) a week in which they were advised to increase their fluid consumption to more than 1.5 L daily. After 1 week, group B patients who still had positive urine cultures (UCs) or had no UC performed took the food supplement for an additional week. UCs were performed on all patients at the first visit (w0) and on most of them at 7 days (w1). Patients who were still positive at w1 or had no UC performed at w1 had UC performed 14 days (w2) thereafter. Of 264 pregnant women enrolled, 216 joined group A, while 48 joined group B. At w1, 70.0% of group A patients and 43.2% of those in group B had negative UCs (p = 0.003). The reduction of bacterial load was 42.2% ± 8.0% and 4.5% ± 9.2%, respectively (p < 0.0001). At w1, symptoms disappeared in 135 patients (62.5%) in group A and 22 patients (45.8%) in group B (p = 0.03). At w2, 30 of 32 group B patients who switched to taking the supplement for the second week had negative UCs, including 20 who had been positive at w1. At w2, all group A patients had negative UCs. No side effects were reported. The food supplement provided effective treatment and might be an adjuvant or alternative to antibiotic therapy of symptomatic UTI in pregnancy.

Omar al-Hammami: a case study in radicalization.

PubMed

Mastors, Elena; Siers, Rhea

2014-01-01

This article presents a case study on the radicalization of Omar al-Hammami, aka Abu Mansoor al-Amriki, an American who joined al-Shabaab, a Somali terrorist group. There are a limited number of in-depth case studies that help to inform the fragmented discussions in the literature about the radicalization process of Islamic terrorists. Hammami received quite a bit of attention from the government and media due to his "homegrown" status, as well as his prolific use of social media to inform the world of his views and exploits. Hammami did not fully commit to the group, his sense of self-importance taking precedent over the norms of the group. He left al-Shabaab, was publicly critical of the group, and was ultimately killed by them. Copyright © 2014 John Wiley & Sons, Ltd.

"In our stories": The perspectives of women living with HIV on an evidence-based group intervention.

PubMed

Dale, Sannisha K; Grimes, Tiffany; Miller, Lauren; Ursillo, Alyssa; Drainoni, Mari-Lynn

2017-07-01

A qualitative study among women living with HIV assessed the aspects of an evidence-based intervention targeting HIV transmission risk reduction (Women Involved in Life Learning from Other Women [WiLLOW]) that women valued and how their lives were impacted. Thirty-one women (80.6% African American) completed interviews. Women valued the personal stories and positive group dynamics (i.e. safety, trust, openness, getting feedback, bonding, and socializing). As a result of WiLLOW, women embraced a strong woman image, joined groups, changed behaviors, accepted their HIV status, became optimistic, and spoke up/advocated in their relationships and communities. Interventions for HIV-positive women may benefit from incorporating the sharing of stories in their curricula and factors that build positive group dynamics.

In Praise of Political Parties. Grade 12 Lesson. Schools of California Online Resources for Education (SCORE): Connecting California's Classrooms to the World.

ERIC Educational Resources Information Center

Hizal, Kris

In this lesson plan, each student must decide which political party he/she will join or whether to register as an independent. Each student will be part of a group analyzing one current political party and presenting to the class this party's solutions for the problems confronting the United States today. The political parties for analysis are:…

Analyzing Enron Data: Bitmap Indexing Outperforms MySQL Queries bySeveral Orders of Magnitude

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stockinger, Kurt; Rotem, Doron; Shoshani, Arie

2006-01-28

FastBit is an efficient, compressed bitmap indexing technology that was developed in our group. In this report we evaluate the performance of MySQL and FastBit for analyzing the email traffic of the Enron dataset. The first finding shows that materializing the join results of several tables significantly improves the query performance. The second finding shows that FastBit outperforms MySQL by several orders of magnitude.

Applying critical theories to nursing in communities.

PubMed

Stevens, P E; Hall, J M

1992-03-01

Public health realities in the United States indicate that unsafe physical surroundings, oppressive social arrangements, economic impoverishment, and political disenfranchisement threaten the safety and well-being of countless aggregates. To affect change in health-damaging conditions, nurses are urged to join with vulnerable groups, working together to expose oppressive situations and take action. As a guide for such emancipatory practice, the use of critical theories as the conceptual basis for community health nursing is advocated.

A Proposed Cosmology of Identity in the Sociotechnical Ecosystem of Homeland Security

DTIC Science & Technology

2017-12-01

extremist violence based on “what we know about the psychological and social factors motivating young people to join extremist groups.”6 The consistent...Veblen (1857–1929), an American sociologist and economist.56 If we look at the historical co-evolution of human societies and technology, we see that...in self-perceived identity and physical behaviors when the psychological attachment to avatars becomes an authentic experience. The concept of

An Analysis of the Training and Development of the Contract Specialist 1102 Interns

DTIC Science & Technology

2010-12-01

get a broad view of contracting and interns are encouraged to join groups such as NCMA to help them with learning. The workforce development chiefs...NUMBER 11. SUPPLEMENTARY NOTES The views expressed in this thesis are those of the author and do not reflect the official policy or position of the...Center CECOM Communications Electronics Command CSRS Civil Service Retirement System DA Department of the Army DAPA Defense Acquisition

ISO 55000: Creating an asset management system.

PubMed

Bradley, Chris; Main, Kevin

2015-02-01

In the October 2014 issue of HEJ, Keith Hamer, group vice-president, Asset Management & Engineering at Sodexo, and marketing director at Asset Wisdom, Kevin Main, argued that the new ISO 55000 standards present facilities managers with an opportunity to create 'a joined-up, whole lifecycle approach' to managing and delivering value from assets. In this article, Kevin Main and Chris Bradley, who runs various asset management projects, examine the process of creating an asset management system.

West Europe Report.

DTIC Science & Technology

1986-04-18

72 FRANCE Giraud Views Mitterrand’s Defense Policies ( Andre Giraud; LE MONDE, 12 Feb 86) 74 NORWAY Women’s Groups Lobby for Larger Female Role in...038 18 April 1986 MILITARY FRANCE GIRAUD VIEWS MITTERRAND’S DEFENSE POLICIES Paris LE MONDE in French 12 Feb 86 p 2 [Article by Andre Giraud...industries started is downright ludicrous, and joining in the election campaign by writing that "thanks to the administration of the Mauroy and Fabius

Obituary: Glenn M. Frye (1926-2007)

NASA Astrophysics Data System (ADS)

Fickinger, William

2011-12-01

Glenn M. Frye, professor emeritus of physics at Case Western Reserve University, died in January 2007. His research interests at Case centered on the detection and identification of cosmic rays at the top of the atmosphere. Glenn was born in Michigan in 1926. He completed both his undergraduate and graduate studies at the University of Michigan. After earning his doctorate in 1950, he joined the nuclear physics research staff at Los Alamos Scientific Laboratory. Frye's research changed direction when he joined Fred Reines, who was also at LASL, in a cosmic ray experiment. In 1959, Reines moved east to become chair of the Case Institute of Technology physics department, and the following year Frye joined him there. The first years at Case Tech were devoted to the development of the rather complex spark chamber detectors which were destined to be suspended from high altitude balloons. Frye s experiments would be carried by the winds for hundreds of miles at altitudes greater than thirty miles, in both the northern and southern hemispheres. The maiden flights were launched in 1965 from the Palestine, Texas National Center for Atmospheric Research Balloon Base. The object was to search for gammas in the 30 to 500 MeV range coming from discrete point sources. Three years later the Frye team, along with collaborators from the University of Melbourne, reported success in this search. In a later Texas flight, high energy gammas were observed to come from the direction of the Crab Nebula, and, much more significantly, they arrived in the correct one millisecond bin of the known thirty millisecond period of the responsible pulsar. In later flights, involving ever more sophisticated detection schemes, Frye and his team collected valuable data on energetic gamma rays emitted by a dozen other sources. Through the 1970s and 1980s, they employed detectors with improved sensitivity and directionality to determine the energy distribution of cosmic gammas. With the participation of CWRU colleague Thomas Jenkins, the group undertook a series of experiments to determine the atmospheric gamma-ray spectrum from 50 MeV up to 12 GeV. The group subsequently developed spark chambers and time-of-flight electronics for the detection of neutrons from the sun and other sources. When opportunities for satellite-borne experiments became available, Frye and Jenkins joined in an experiment aboard the Compton Gamma-ray Observatory Satellite. Until his retirement in 1993, Glenn Frye found a way to do exciting physics and astrophysics which involved travel and adventure, world-class research, and great opportunities for his students and colleagues.

Joining of SiC parts by polishing and hipping

DOEpatents

Rossi, Guilio A.; Pelletier, Paul J.

1990-05-15

A method of joining two pre-sintered pieces of silicon carbide is disclosed. It entails polishing the surfaces to be joined to a mirror-finish, fitting the polished surfaces together to form a composite structure, and then subjecting the composite structure to hot isostatic pressing under conditions which are sufficient to form a joint which is essentially indistinguishable from the original silicon carbide pieces.

77 FR 22561 - Drawn Stainless Steel Sinks From the People's Republic of China: Correction to Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-16

... with multiple bowls that are joined through a welding operation to form one unit are covered by the... bowls that are joined through a welding operation to form one unit are covered by the scope of the... sinks with multiple drawn bowls that are joined through a welding operation to form one unit are covered...

Joined concentric tubes

DOEpatents

DeJonghe, Lutgard; Jacobson, Craig; Tucker, Michael; Visco, Steven

2013-01-01

Tubular objects having two or more concentric layers that have different properties are joined to one another during their manufacture primarily by compressive and friction forces generated by shrinkage during sintering and possibly mechanical interlocking. It is not necessary for the concentric tubes to display adhesive-, chemical- or sinter-bonding to each other in order to achieve a strong bond. This facilitates joining of dissimilar materials, such as ceramics and metals.

Joining of porous silicon carbide bodies

DOEpatents

Bates, Carl H.; Couhig, John T.; Pelletier, Paul J.

1990-05-01

A method of joining two porous bodies of silicon carbide is disclosed. It entails utilizing an aqueous slip of a similar silicon carbide as was used to form the porous bodies, including the sintering aids, and a binder to initially join the porous bodies together. Then the composite structure is subjected to cold isostatic pressing to form a joint having good handling strength. Then the composite structure is subjected to pressureless sintering to form the final strong bond. Optionally, after the sintering the structure is subjected to hot isostatic pressing to further improve the joint and densify the structure. The result is a composite structure in which the joint is almost indistinguishable from the silicon carbide pieces which it joins.

Automated Program Recognition.

DTIC Science & Technology

1987-02-01

the 45 %V. UC I it F I F Figaze~~~~~~~~ 2.3 hIln o h rga G n h lciF .446 1 68%ir eI TI Ti T2 T2 T3 T3 D C B A D C B A ’Ir ioin join join oi join join... Ei (remove-st-thru-input-mappings p ’(Trunc? 1)) finally (return (and (p> (Trunc? 2)) (p> (Trunc7 1))))) (exit-predicate (nt-n) Test-Predicate?))) att...null) (co-occur (nt-n> Gen22) (n> Co-E-of-Count-from-Zero22))) att-tranufer- upecs ((control-env (control-env (nt-n> Gen22)))) doc ("computes the length

Efficient and Scalable Graph Similarity Joins in MapReduce

PubMed Central

Chen, Yifan; Zhang, Weiming; Tang, Jiuyang

2014-01-01

Along with the emergence of massive graph-modeled data, it is of great importance to investigate graph similarity joins due to their wide applications for multiple purposes, including data cleaning, and near duplicate detection. This paper considers graph similarity joins with edit distance constraints, which return pairs of graphs such that their edit distances are no larger than a given threshold. Leveraging the MapReduce programming model, we propose MGSJoin, a scalable algorithm following the filtering-verification framework for efficient graph similarity joins. It relies on counting overlapping graph signatures for filtering out nonpromising candidates. With the potential issue of too many key-value pairs in the filtering phase, spectral Bloom filters are introduced to reduce the number of key-value pairs. Furthermore, we integrate the multiway join strategy to boost the verification, where a MapReduce-based method is proposed for GED calculation. The superior efficiency and scalability of the proposed algorithms are demonstrated by extensive experimental results. PMID:25121135