Sensory and chemical profiles of Finnish honeys of different botanical origins and consumer preferences.

PubMed

Kortesniemi, Maaria; Rosenvald, Sirli; Laaksonen, Oskar; Vanag, Anita; Ollikka, Tarja; Vene, Kristel; Yang, Baoru

2018-04-25

The sensory-chemical profiles of Finnish honeys (labeled as buckwheat, cloudberry-bog, lingonberry, sweet clover, willowherb and multifloral honeys) were investigated using a multi-analytical approach. The sensory test (untrained panel, n = 62) was based on scaling and check-all-that-apply (CATA) methods accompanied with questions on preference and usage of honey. The results were correlated with corresponding profiles of odor-active compounds, determined using gas chromatography coupled with mass spectrometry/olfactometry (GC-MS/O). Botanical origins and chemical compositions including sugars were evaluated using NMR spectroscopy. A total of 73 odor-active compounds were listed based on GC-O. Sweet and mild honeys with familiar sensory properties were preferred by the panelists (PCA, R 2 X(1) = 0.7) while buckwheat and cloudberry-bog honeys with strong odor, flavor and color were regarded as unfamiliar and unpleasant. The data will give the honey industry novel information on honey properties in relation to the botanical origin, and consumer preference. Copyright © 2017 Elsevier Ltd. All rights reserved.

RFID Continuance Usage Intention in Health Care Industry.

PubMed

Iranmanesh, Mohammad; Zailani, Suhaiza; Nikbin, Davoud

Radio-frequency identification (RFID) has been proved to be an effective tool both for improving operational efficiency and for gaining competitive advantage in the health care industry despite its relatively low-usage rate in hospitals. The sustained use of RFID by health care professionals will promote its development in the long term. This study evaluates the acceptance continuance of RFID among health care professionals through technology continuance theory (TCT). Data were collected from 178 medical professionals in Malaysia and were then analyzed using the partial least squares technique. The analysis showed that the TCT model provided not only a thorough understanding of the continuance behavior of health care professionals toward RFID but also the attitudes, satisfaction, and perceived usefulness of professionals toward it. The results of this study are expected to assist policy makers and managers in the health care industry in implementing the RFID technology in hospitals by understanding the determinants of continuance of RFID usage intention.

Rubber industry

NASA Astrophysics Data System (ADS)

Staszak, Maciej

2018-03-01

Following chapter presents short introductory description of rubber and rubber industry. The main problem of rubber industry is the way of the usage of spent tires. Furthermore very important group of problems arise considering the metal and nonmetal additives which are significant component of the vulcanized rubber. The key attention is dedicated to typical ways of rubber usage in utilization and recovery of metals from spent rubber materials concentrating specifically on used tires processing. The method of recovery of rare metals from rubber tires was described. The rubber debris finds widest use in the field of waste metal solutions processing. The environmental pollution caused by metals poses serious threat to humans. Several applications of the use of waste rubber debris to remove metals from environmental waters were described. Moreover, the agriculture usage of waste tire rubber debris is described, presenting systems where the rubber material can be useful as a soil replacement.

Building Information Modelling: Challenges and Barriers in Implement of BIM for Interior Design Industry in Malaysia

NASA Astrophysics Data System (ADS)

Hamid, A. B. Abd; Taib, M. Z. Mohd; Razak, A. H. N. Abdul; Embi, M. R.

2018-04-01

Building Information Modelling (BIM) is an innovative approach that has developed crossways the global in architecture, engineering and construction (AEC) industry. The construction industry of Malaysia has undergone a rapid development and dynamic technology adoption in advance and methods between the players industry and stakeholders. Consequently, limited technologies and devices have not been successful as it should have been. This study will be emphasizing scenarios of challenges and barriers in adopting BIM in interior design industry in Malaysia. The study was emphasizing the challenges and barriers in BIM usage from the designer’s perspective. The data are collected through the questionnaires as to identifying the barriers, knowledge, readiness and awareness and distributed to interior design firms were selected randomly. The finding of this research is to examine the barriers and causes of variables BIM usage for interior design industry in Malaysia. The outcome of this study is to identify the constraint of adoption BIM in interior design industry compare to others players in same industry.

DNA Replication Profiling Using Deep Sequencing.

PubMed

Saayman, Xanita; Ramos-Pérez, Cristina; Brown, Grant W

2018-01-01

Profiling of DNA replication during progression through S phase allows a quantitative snap-shot of replication origin usage and DNA replication fork progression. We present a method for using deep sequencing data to profile DNA replication in S. cerevisiae.

Titanium fasteners. [for aircraft industry

NASA Technical Reports Server (NTRS)

Phillips, J. L.

1972-01-01

Titanium fasteners are used in large quantities throughout the aircraft industry. Most of this usage is in aluminum structure; where titanium structure exists, titanium fasteners are logically used as well. Titanium fasteners offer potential weight savings to the designer at a cost of approximately $30 per pound of weight saved. Proper and least cost usage must take into consideration type of fastener per application, galvanic couples and installation characteristics of protective coatings, cosmetic appearance, paint adhesion, installation forces and methods available and fatigue performance required.

BENEFICIAL USE OF INDUSTRIAL STORMWATER RUNOFF: NONPOTABLE WATER SUPPLY PURPOSES

EPA Science Inventory

As population and industry grow, water demand increases, and water supply becomes more of a problem. While reclamation of municipal wastewater for industry, subpotable domestic usage, and groundwater recharge has been practiced in the United States over the past several decades ...

Alternative antimicrobial supplements that positively impact animal health and food safety.

USDA-ARS?s Scientific Manuscript database

Antibiotic usage is a common practice in the livestock industry that has progressively gained attention from consumers of livestock products in regard to human and environmental health. Specifically, sub-therapeutic usage of antibiotics and the belief that prophylactic supplementation leads to anti...

Irradiation enhancement of biomass conversion

NASA Astrophysics Data System (ADS)

Smith, G. S.; Kiesling, H. E.; Galyean, M. L.; Bader, J. R.

The vast supply of cellulosic agricultural residues and industrial by-products that is produced each year is a prospective resource of biomass suitable for conversion to useful products such as feedstock for the chemicals industry and feedstuffs for the livestock industry. Conversions of such biomass is poor at present, and utilization is inefficient, because of physio-chemical barriers to biological degradation and (or) anti-quality components such as toxicants that restrict biological usages. Improvements in biodegradability of ligno-cellulosic materials have been accomplished by gamma-ray and electron-beam irradiation at intermediate dosage (˜ 50 Mrad; .5 MGy); but applications of the technology have been hampered by questionable interpretations of results. Recent research with organic wastes such as sewage sludge and straw suggests opportunity for important applications of irradiation technology in enhancement of biomass conversion. Data from experiments using irradiated straw as feed for ruminants are presented and discussed in relation to research on prospective usage of sewage products as feed for ruminants. Findings are discussed in regard to prospective applications in industrial fermentation processes. Possible usage of irradiation technology for destruction of toxicants in exotic plants is considered in regard to prospective new feedstuffs.

Virtual industrial water usage and wastewater generation in the Middle East/North African region

NASA Astrophysics Data System (ADS)

Sakhel, S. R.; Geissen, S.-U.; Vogelpohl, A.

2013-01-01

This study deals with the quantification of volumes of water usage, wastewater generation, virtual water export, and wastewater generation from export for eight export relevant industries present in the Middle East/North Africa (MENA). It shows that about 3400 million m3 of water is used per annum while around 793 million m3 of wastewater is generated from products that are meant for domestic consumption and export. The difference between volumes of water usage and wastewater generation is due to water evaporation or injecting underground (oil wells pressure maintenance). The wastewater volume generated from production represents a population equivalent of 15.5 million in terms of wastewater quantity and 30.4 million in terms of BOD. About 409 million m3 of virtual water flows from MENA to EU27 (resulting from export of eight commodities) which is equivalent to 12.1% of the water usage of those industries and Libya is the largest virtual water exporter (about 87 million m3). Crude oil and refined petroleum products represent about 89% of the total virtual water flow, fertilizers represent around 10% and 1% remaining industries. EU27 poses the greatest indirect pressure on the Kuwaiti hydrological system where the virtual water export represents about 96% of the actual renewable water resources in this country. The Kuwaiti crude oil water use in relation to domestic water withdrawal is about 89% which is highest among MENA countries. Pollution of water bodies, in terms of BOD, due to production is very relevant for crude oil, slaughterhouses, refineries, olive oil, and tanneries while pollution due to export to EU27 is most relevant for crude oil industry and olive oil mills.

The Barriers and Causes of Building Information Modelling Usage for Interior Design Industry

NASA Astrophysics Data System (ADS)

Hamid, A. B. Abd; Taib, M. Z. Mohd; Razak, A. H. N. Abdul; Embi, M. R.

2017-12-01

Building Information Modeling (BIM) has since developed alongside the improvement in the construction industry, purposely to simulate the design, management, construction and documentation. It facilitates and monitors the construction through visualization and emphasizes on various inputs to virtually design and construct a building using specific software. This study aims to identify and elaborate barriers of BIM usage in interior design industry in Malaysia. This study is initiated with a pilot survey utilising sixteen respondents that has been randomly chosen. Respondents are attached with interior design firms that are registered by Lembaga Arkitek Malaysia (LAM). The research findings are expected to provide significant information to encourage BIM adoption among interior design firms.

Profiles of Asians in Sacramento. Final Report.

ERIC Educational Resources Information Center

Lee, Ivy

This project was undertaken to provide more information on the condition of Asians. More specifically, it sought to: (1) obtain descriptive and demographic data on Asians; (2) determine the extent of usage of existing social services. Structural and attitudinal factors which facilitate or inhibit usage were examined; (3) identify what Asians…

Study on Sources of Volatile Organic Compounds (CMB) in Pearl River Delta region, China

NASA Astrophysics Data System (ADS)

Liu, Y.; Shao, M.; Lu, S.; Chang, C.; Wang, C. J.; Wang, B.

2007-05-01

The profiles of major Volatile organic compounds (VOCs) sources including vehicle exhaust, gasoline vapor, painting, asphalt, liquefied petroleum gas (LPG), biomass burning and petrochemical industry in Pearl River Delta were experimentally determined. Source samples were taken by using dilution chamber for mobile and stationary sources, laboratory simulation for biomass burning. The concentrations of 108 VOC species of sources were quantified by using canister with pre-concentration-GC/MS system, from which 52 PAMS hydrocarbons and one kind of chlorinated hydrocarbon were deployed to build the source profiles for source apportionment of VOCs. Based the measurement of source profiles, the possible tracers for various emission sources were identified, e.g 2-methylbutane and 1,3-butadiene were the tracers for motor vehicle exhaust, the characteristic compounds of architectural and furnishing coatings are aromatics such as toluene and m/p-xylene; the light hydrocarbons, namely n-butane, trans-2-butene and n-pentane, dominated the composition of gasoline vapor; and the nonane, decane and undecane are found to represent the asphalt emissions etc.. The CMB receptor model was applied to source apportionment of 58 hydrocarbons measured at seven sites during the PRD campaign, 2004. The 12 kinds of VOC sources include gasoline/diesel-powered vehicle exhaust, gasoline/diesel headspace vapor, vehicle evaporative emissions, liquid petroleum gas (LPG) leakage, painting vapors, asphalt emission from paved road, biomass burning, coal burning, chemical industry and petroleum refinery. Vehicle exhaust was the largest sources contributing over half of the ambient VOCs at the three urban sites (GuangZhou, FoShan and ZhongShan). LPG leakage played an important role with the percentage of 8- 16% in most sites in PRD. Contributions from solvents usage were highest at DongGuan, an industrial site. At XinKen, the solvents and coatings had the largest percentage of 31% probably due to the influence of its upwind area of DongGuan. The local biomass burning was also found to be a noticeable source at XK.

Sedimentary profile of polychlorinated biphenyls in the East China Sea: implications for the recent rising emissions from the unintentionally industrial productions

NASA Astrophysics Data System (ADS)

Zhao, T.; Guo, Z.

2017-12-01

As industrially synthesized chemicals, polychlorinated biphenyls (PCBs) with their predominant anthropogenic origins are effective proxies for the processes of industrialization and urbanization. In this study, sedimentary profiles extracted from locations in the coastal and offshore area of the East China Sea (core C0803: 27°38'N, 121°39'E; core FFJ103: 31°40'N, 125°52'E) were chosen to indicate the chronological distribution of PCB pollutions in China. The concentrations of total PCBs (ΣPCBs) were 0.17-1.21 ng g-1 and 0.19-0.71 ng g-1 respectively in core 0803 and FFj103, the range of which was in the low end of that detected in regions with long PCB application history. The timeline of PCB residues in sediments coincides with the production and use of PCB products in China. PCB concentrations leveled off at the bottoms of the both core sediments and exhibited an obvious peak in periods of 60s-70s. This period corresponds to approximately the time PCBs were first manufactured commercially since 1965 in China. A small dip of ΣPCBs was followed in the early 1980s reflecting the effect of banning on PCB usage in China, after which an exponential escalation at the surface layers was found in these cores. The time-dependent PCB input flux resembles that of PCB concentrations, suggesting a relatively stable depositional environment. As compared to the other studies at most locations, a noticeable increase of ΣPCBs fluxes was consistent with the fact that the significantly rising contributions of unintentionally produced PCBs (UP-PCB) over that made by intentionally produced emissions. Based on the compilation of UP-PCB emissions in China, the UP-PCB emissions started to increase quickly in the early 90s due to the fast and continuously developing cement and steel industries in China. This discrepancy of time pattern in PCB sedimentary profiles is a result of difference in evolution of anthropic activity pressure and economic development.

1 H-NMR with Multivariate Analysis for Automobile Lubricant Comparison.

PubMed

Kim, Siwon; Yoon, Dahye; Lee, Dong-Kye; Yoon, Changshin; Kim, Suhkmann

2017-07-01

Identification of suspected automobile-related lubricants could provide valuable information in forensic cases. We examined that automobile lubricants might exhibit the chemometric characteristics to their individual usages. To compare the degree of clustering in the plots, we co-plotted general industrial oils that were highly dissimilar with automobile lubricants in additive compositions. 1 H-NMR spectroscopy was used with multivariate statistics as a tool for grouping, clustering, and identification of automobile lubricants in laboratory conditions. We analyzed automobile lubricants including automobile engine oils, automobile transmission oils, automobile gear oils, and motorcycle oils. In contrast to the general industrial oils, automobile lubricants showed relatively high tendencies of clustering to their usages. Our pilot study demonstrated that the comparison of known and questioned samples to their usages might be possible in forensic fields. © 2017 American Academy of Forensic Sciences.

Student Competency Profile Chart: A Competency Based Vocational Education Instrument.

ERIC Educational Resources Information Center

Martell, John L.

This document defines, describes usage of, and provides samples of student competency profiles being used in 17 vocational programs at Rutland Area Vocational-Technical Center in Rutland, Vermont. The profiles cover the following programs: auto body, auto mechanics, business/data processing, cabinetmaking, carpentry/masonry, culinary arts,…

Industrial wastewater minimization using water pinch analysis: a case study on an old textile plant.

PubMed

Ujang, Z; Wong, C L; Manan, Z A

2002-01-01

Industrial wastewater minimization can be conducted using four main strategies: (i) reuse; (ii) regeneration-reuse; (iii) regeneration-recycling; and (iv) process changes. This study is concerned with (i) and (ii) to investigate the most suitable approach to wastewater minimization for an old textile industry plant. A systematic water networks design using water pinch analysis (WPA) was developed to minimize the water usage and wastewater generation for the textile plant. COD was chosen as the main parameter. An integrated design method has been applied, which brings the engineering insight using WPA that can determine the minimum flowrate of the water usage and then minimize the water consumption and wastewater generation as well. The overall result of this study shows that WPA has been effectively applied using both reuse and regeneration-reuse strategies for the old textile industry plant, and reduced the operating cost by 16% and 50% respectively.

Business Simulation Games: Current Usage Levels--An Update.

ERIC Educational Resources Information Center

Faria, A. J.

1998-01-01

Updates a 1987 survey of business-school deans, business faculty, and training-and-development managers in industry that examined the extent to which simulation games were used in academia and business training programs. Findings show that simulation-game usage has grown over the past ten years with expectations for further growth. Contains 29…

Credit Cards on Campus: Academic Inquiry, Objective Empiricism, or Advocacy Research?

ERIC Educational Resources Information Center

Manning, Robert D.; Kirshak, Ray

2005-01-01

Professors John M. Barron and Michael E. Staten's article in Vol. 34, No. 3 of this journal, "Usage of Credit Cards Received through College Student-Marketing Programs," purports to "provide benchmark measures of college student credit card usage." Based on empirical analyses of proprietary industry data, they conclude that "There is no…

Antibiotic resistance profile of bacterial isolates from animal farming aquatic environments and meats in a peri-urban community in Daejeon, Korea.

PubMed

Rho, Hyunjin; Shin, Bongjin; Lee, Okbok; Choi, Yu-Hyun; Rho, Jaerang; Lee, Jiyoung

2012-05-01

The increasing usage of antibiotics in the animal farming industry is an emerging worldwide problem contributing to the development of antibiotic resistance. The purpose of this work was to investigate the prevalence and antibiotic resistance profile of bacterial isolates collected from animal farming aquatic environments and meats in a peri-urban community in Daejeon, Korea. In an antibacterial susceptibility test, the bacterial isolates showed a high incidence of resistance (∼26.04%) to cefazolin, tetracycline, gentamycin, norfloxacin, erythromycin and vancomycin. The results from a test for multiple antibiotic resistance indicated that the isolates were displaying an approximately 5-fold increase in the incidence of multiple antibiotic resistance to combinations of two different antibiotics compared to combinations of three or more antibiotics. Most of the isolates showed multi-antibiotic resistance, and the resistance patterns were similar among the sampling groups. Sequencing data analysis of 16S rRNA showed that most of the resistant isolates appeared to be dominated by the classes Betaproteobacteria and Gammaproteobacteria, including the genera Delftia, Burkholderia, Escherichia, Enterobacter, Acinetobacter, Shigella and Pseudomonas.

WOSMIP II- Workshop on Signatures of Medical and Industrial Isotope Production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthews, Murray; Achim, Pascal; Auer, M.

2011-11-01

Medical and industrial fadioisotopes are fundamental tools used in science, medicine and industry with an ever expanding usage in medical practice where their availability is vital. Very sensitive environmental radionuclide monitoring networks have been developed for nuclear-security-related monitoring [particularly Comprehensive Test-Ban-Treaty (CTBT) compliance verification] and are now operational.

AEROSOL INDUSTRY SUCCESS IN REDUCING CFC PROPELLANT USAGE

EPA Science Inventory

Part I of this report discusses the U.S. aerosol industry's experience in converting from chlorofluorocarbon (CFC) propellants to alternative aerosol formulations. Detailed examples of non-CFC formulations are provided for 28 categories of aerosol products. ydrocarbon propellants...

Segmentation of Natural Gas Customers in Industrial Sector Using Self-Organizing Map (SOM) Method

NASA Astrophysics Data System (ADS)

Masbar Rus, A. M.; Pramudita, R.; Surjandari, I.

2018-03-01

The usage of the natural gas which is non-renewable energy, needs to be more efficient. Therefore, customer segmentation becomes necessary to set up a marketing strategy to be right on target or to determine an appropriate fee. This research was conducted at PT PGN using one of data mining method, i.e. Self-Organizing Map (SOM). The clustering process is based on the characteristic of its customers as a reference to create the customer segmentation of natural gas customers. The input variables of this research are variable of area, type of customer, the industrial sector, the average usage, standard deviation of the usage, and the total deviation. As a result, 37 cluster and 9 segment from 838 customer data are formed. These 9 segments then employed to illustrate the general characteristic of the natural gas customer of PT PGN.

Facebook Band Director's Group: Member Usage Behaviors and Perceived Satisfaction for Meeting Professional Development Needs

ERIC Educational Resources Information Center

Rickels, David A.; Brewer, Wesley D.

2017-01-01

The purpose of this study was to investigate participation in a Facebook social media community known as Band Director's Group (BDG) through examination of members' demographic profiles, self-reported usage behaviors, and perceptions about how group activity satisfies their professional development needs. Respondents to an online survey (n = 336)…

MERCURY USAGE AND ALTERNATIVES IN THE ELECTRICAL AND ELECTRONICS INDUSTRIES

EPA Science Inventory

Many industries have already found alternatives for mercury or have greatly decreased mercury use. However, the unique electromechanical and photoelectric properties of mercury and mercury compounds have made replacement of mercury difficult in some applications. This study was i...

Organometallic Chemistry and Catalysis in Industry.

ERIC Educational Resources Information Center

Parshall, George W.; Putscher, Richard E.

1986-01-01

Traces the growth in the industrial usage of organometallic chemistry from 1950 to 1977, pointing out that this growth involved the production of commodity chemicals. Indicates that one of the early successes of organometallic chemistry was the discovery of ethylene polymerization catalysts. (JN)

The Impact of Information and Communication Technology on Intermediation, Outreach, and Decision Rights in the Microfinance Industry

ERIC Educational Resources Information Center

Weber, David Michael

2012-01-01

The microfinance industry provides financial services to the world's poor in hopes of moving individuals and families out of poverty. This dissertation document suggests that information and communication technologies (ICTs) are changing the microfinance industry, especially given recent advancements in mobile banking, Internet usage and…

Evaluating chemical-, mechanical-, and bio-pulping processes and their sustainability characterization using life cycle assessment

Treesearch

Tapas K. Das; Carl Houtman

2004-01-01

Pulp and paper manufacturing constitutes one of the largest industry segments in the United States in term of water and energy usage and total discharges to the environment. More than many other industries, however, this industry plays an important role in sustainable development because its chief raw material— wood fiber—is renewable. This industry provides an example...

Source apportionment of VOCs and the contribution to photochemical ozone formation during summer in the typical industrial area in the Yangtze River Delta, China

NASA Astrophysics Data System (ADS)

Shao, Ping; An, Junlin; Xin, Jinyuan; Wu, Fangkun; Wang, Junxiu; Ji, Dongsheng; Wang, Yuesi

2016-07-01

Volatile organic compounds (VOCs) were continuously observated in a northern suburb of Nanjing, a typical industrial area in the Yangtze River Delta, in a summer observation period from 15th May to 31st August 2013. The average concentration of total VOCs was (34.40 ± 25.20) ppbv, including alkanes (14.98 ± 12.72) ppbv, alkenes (7.35 ± 5.93) ppbv, aromatics (9.06 ± 6.64) ppbv and alkynes (3.02 ± 2.01) ppbv, respectively. Source apportionment via Positive Matrix Factorization was conducted, and six major sources of VOCs were identified. The industry-related sources, including industrial emissions and industrial solvent usage, occupied the highest proportion, accounting for about 51.26% of the VOCs. Vehicular emissions occupied the second highest proportion, accounting for about 34.08%. The rest accounted for about 14.66%, including vegetation emission and liquefied petroleum gas/natural gas usage. Contributions of VOCs to photochemical O3 formation were evaluated by the application of a detailed chemical mechanism model (NCAR MM). Alkenes were the dominant contributors to the O3 photochemical production, followed by aromatics and alkanes. Alkynes had a very small impact on photochemical O3 formation. Based on the outcomes of the source apportionment, a sensitivity analysis of relative O3 reduction efficiency (RORE), under different source removal regimes such as using the reduction of VOCs from 10% to 100% as input, was conducted. The RORE was the highest (~ 20%-40%) when the VOCs from solvent-related sources decreased by 40%. The highest RORE values for vegetation emissions, industrial emissions, vehicle exhaust, and LPG/NG usage were presented in the scenarios of 50%, 80%, 40% and 40%, respectively.

The global contribution of energy consumption by product exports from China.

PubMed

Tang, Erzi; Peng, Chong

2017-06-01

This paper presents a model to analyze the mechanism of the global contribution of energy usage by product exports. The theoretical analysis is based on the perspective that contribution estimates should be in relatively smaller sectors in which the production characteristics could be considered, such as the productivity distribution for each sector. Then, we constructed a method to measure the global contribution of energy usage. The simple method to estimate the global contribution is the percentage of goods export volume compared to the GDP as a multiple of total energy consumption, but this method underestimates the global contribution because it ignores the structure of energy consumption and product export in China. According to our measurement method and based on the theoretical analysis, we calculated the global contribution of energy consumption only by industrial manufactured product exports in a smaller sector per industry or manufacturing sector. The results indicated that approximately 42% of the total energy usage in the whole economy for China in 2013 was contributed to foreign regions. Along with the primary products and service export in China, the global contribution of energy consumption for China in 2013 by export was larger than 42% of the total energy usage.

Economical and environmentally-friendly approaches for usage of onion (Allium cepa L.) waste.

PubMed

Sharma, Kavita; Mahato, Neelima; Nile, Shivraj Hariram; Lee, Eul Tal; Lee, Yong Rok

2016-08-10

Onion (Allium cepa L.) is one of the most commonly cultivated crops across the globe, and its production is increasing every year due to increasing consumer demand. Simultaneously, huge amounts of waste are produced from different parts of the onion, which ultimately affect the environment in various ways. Hence, proper usage as well as disposal of this waste is important from the environmental aspect. This review summarizes various usage methods of onion waste material, and processes involved to achieve maximum benefits. Processing industries produce the largest amount of onion waste. Other sources are storage systems, domestic usage and cultivation fields. Particular emphasis has been given to the methods used for better extraction and usage of onion waste under specific topics: viz. organic synthesis, production of biogas, absorbent for pollutants and value added products.

Engineering biosynthesis of high-value compounds in photosynthetic organisms.

PubMed

O'Neill, Ellis C; Kelly, Steven

2017-09-01

The photosynthetic, autotrophic lifestyle of plants and algae position them as ideal platform organisms for sustainable production of biomolecules. However, their use in industrial biotechnology is limited in comparison to heterotrophic organisms, such as bacteria and yeast. This usage gap is in part due to the challenges in generating genetically modified plants and algae and in part due to the difficulty in the development of synthetic biology tools for manipulating gene expression in these systems. Plant and algal metabolism, pre-installed with multiple biosynthetic modules for precursor compounds, bypasses the requirement to install these pathways in conventional production organisms, and creates new opportunities for the industrial production of complex molecules. This review provides a broad overview of the successes, challenges and future prospects for genetic engineering in plants and algae for enhanced or de novo production of biomolecules. The toolbox of technologies and strategies that have been used to engineer metabolism are discussed, and the potential use of engineered plants for industrial manufacturing of large quantities of high-value compounds is explored. This review also discusses the routes that have been taken to modify the profiles of primary metabolites for increasing the nutritional quality of foods as well as the production of specialized metabolites, cosmetics, pharmaceuticals and industrial chemicals. As the universe of high-value biosynthetic pathways continues to expand, and the tools to engineer these pathways continue to develop, it is likely plants and algae will become increasingly valuable for the biomanufacturing of high-value compounds.

Annual asphalt pavement industry survey on recycled materials and warm-mix asphalt usage : 2009-2012, [summary].

DOT National Transportation Integrated Search

2013-12-01

The objective of this survey was to quantify the use of recycled materials, including RAP and RAS, and WMA produced by the asphalt pavement industry. The National Asphalt Pavement Association (NAPA) conducted a voluntary survey of asphalt mixture pro...

Collection and dissemination of thermal energy storage system information for the pulp and paper industry

NASA Technical Reports Server (NTRS)

Edde, H.

1981-01-01

The collection and dissemination of thermal energy storage (TES) system technology for the pulp and paper industry with the intent of reducing fossil fuel usage is discussed. The study plan is described and a description presented of example TES systems.

Synonymous codon usage of genes in polymerase complex of Newcastle disease virus.

PubMed

Kumar, Chandra Shekhar; Kumar, Sachin

2017-06-01

Newcastle disease virus (NDV) is pathogenic to both avian and non-avian species but extensively finds poultry as its primary host and causes heavy economic losses in the poultry industry. In this study, a total of 186 polymerase complex comprising of nucleoprotein (N), phosphoprotein (P), and large polymerase (L) genes of NDV was analyzed for synonymous codon usage. The relative synonymous codon usage and effective number of codons (ENC) values were used to estimate codon usage variation in each gene. Correspondence analysis (COA) was used to study the major trend in codon usage variation. Analyzing the ENC plot values against GC3s (at synonymous third codon position) we concluded that mutational pressure was the main factor determining codon usage bias than translational selection in NDV N, P, and L genes. Moreover, correlation analysis indicated, that aromaticity of N, P, and L genes also influenced the codon usage variation. The varied distribution of pathotypes for N, P, and L gene clearly suggests that change in codon usage for NDV is pathotype specific. The codon usage preference similarity in N, P, and L gene might be detrimental for polymerase complex functioning. The study represents a comprehensive analysis to date of N, P, and L genes codon usage pattern of NDV and provides a basic understanding of the mechanisms for codon usage bias. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Commercial Building Tenant Energy Usage Aggregation and Privacy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Livingston, Olga V.; Pulsipher, Trenton C.; Anderson, David M.

A growing number of building owners are benchmarking their building energy use. This requires the building owner to acquire monthly whole-building energy usage information, which can be challenging for buildings in which individual tenants have their own utility meters and accounts with the utility. Some utilities and utility regulators have turned to aggregation of customer energy use data (CEUD) as a way to give building owners whole-building energy usage data while protecting customer privacy. Meter profile aggregation adds a layer of protection that decreases the risk of revealing CEUD as the number of meters aggregated increases. The report statistically characterizesmore » the similarity between individual energy usage patterns and whole-building totals at various levels of meter aggregation.« less

[Complex technology for water and wastewater disinfection and its industrial realization in prototype unit].

PubMed

Arakcheev, E N; Brunman, V E; Brunman, M V; Konyashin, A V; Dyachenko, V A; Petkova, A P

Usage of complex automated electrolysis unit for drinking water disinfection and wastewater oxidation and coagulation is scoped, its ecological and energy efficiency is shown. Properties of technological process of anolyte production using membrane electrolysis of brine for water disinfection in municipal pipelines and potassium ferrate production using electrochemical dissolution of iron anode in NaOH solution for usage in purification plants are listed. Construction of modules of industrial prototype for anolyte and ferrate production and applied aspects of automation of complex electrolysis unit are proved. Results of approbation of electrolytic potassium ferrate for drinking water disinfection and wastewater, rain water and environmental water oxidation and coagulation are shown.

Analyses of Diamond Wire Sawn Wafers: Effect of Various Cutting Parameters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sopori, Bhushan; Basnyat, Prakash; Devayajanam, Srinivas

We have evaluated surface characteristics of diamond wire cut (DWC) wafers sawn under a variety of cutting parameters. These characteristics include surface roughness, spatial frequencies of surface profiles, phase changes, damage depth, and lateral non-uniformities in the surface damage. Various cutting parameters investigated are: wire size, diamond grit size, reciprocating frequency, feed rate, and wire usage. Spatial frequency components of surface topography/roughness are influenced by individual cutting parameters as manifested by distinct peaks in the Fourier transforms of the Dektak profiles. The depth of damage is strongly controlled by diamond grit size and wire usage and to a smaller degreemore » by the wire size.« less

Usage of Alternative, Environmentally Acceptable Materials—Experience from Eastern Croatia

NASA Astrophysics Data System (ADS)

Barišić, I.; Zagvozda, M.; Dimter, S.

2015-11-01

The concept of sustainability should be the main guiding principle in the construction industry today. It mandates conservation of natural resources and thus lower impact on the environment. In road construction, part of construction industry that consumes largest quantities of natural materials, sustainable building and maintenance of roads is possible trough application of secondary materials. Usage of industrial and construction waste presents energy, ecologically and financially effective alternative. Republic of Croatia, even as a new member of the European Union, still lags behind the well-established practices of the application of alternative materials in different European countries. The reasons for this can be found in the current legal and technical regulations for alternative materials. In this paper, the existing regulations for alternative materials and the impact they have on the application of these materials in practice in the region of eastern Croatia will be shown.

Biochemical Profile of Heritage and Modern Apple Cultivars and Application of Machine Learning Methods To Predict Usage, Age, and Harvest Season.

PubMed

Anastasiadi, Maria; Mohareb, Fady; Redfern, Sally P; Berry, Mark; Simmonds, Monique S J; Terry, Leon A

2017-07-05

The present study represents the first major attempt to characterize the biochemical profile in different tissues of a large selection of apple cultivars sourced from the United Kingdom's National Fruit Collection comprising dessert, ornamental, cider, and culinary apples. Furthermore, advanced machine learning methods were applied with the objective to identify whether the phenolic and sugar composition of an apple cultivar could be used as a biomarker fingerprint to differentiate between heritage and mainstream commercial cultivars as well as govern the separation among primary usage groups and harvest season. A prediction accuracy of >90% was achieved with the random forest method for all three models. The results highlighted the extraordinary phytochemical potency and unique profile of some heritage, cider, and ornamental apple cultivars, especially in comparison to more mainstream apple cultivars. Therefore, these findings could guide future cultivar selection on the basis of health-promoting phytochemical content.

Exploring the Learning Problems and Resource Usage of Undergraduate Industrial Design Students in Design Studio Courses

ERIC Educational Resources Information Center

Chen, Wenzhi

2016-01-01

Design is a powerful weapon for modern companies so it is important to have excellent designers in the industry. The purpose of this study is to explore the learning problems and the resources that students use to overcome problems in undergraduate industrial design studio courses. A survey with open-type questions was conducted to collect data.…

Using Mobile Device for Learning: From Students' Perspective

ERIC Educational Resources Information Center

Suki, Norazah Mohd; Suki, Norbayah Mohd

2011-01-01

This study aims to examine students' acceptance of mobile technology usage for learning. A questionnaire designed with five open-ended questions was distributed to 20 students from the Faculty of Industrial Art and Design Technology of Unisel (Universiti Industri Selangor), Malaysia. Results construes that students were not keen on m-learning…

Numerical modeling of friction welding of bi-metal joints for electrical applications

NASA Astrophysics Data System (ADS)

Velu, P. Shenbaga; Hynes, N. Rajesh Jesudoss

2018-05-01

In the manufacturing industries, and more especially in electrical engineering applications, the usage of non-ferrous materials plays a vital role. Today's engineering applications relies upon some of the significant properties such as a good corrosion resistance, mechanical properties, good heat conductivity and higher electrical conductivity. Copper-aluminum bi-metal joint is one such combination that meets the demands requirements for electrical applications. In this work, the numerical simulation of AA 6061 T6 alloy/Copper was carried out under joining conditions. By using this developed model, the temperature distribution along the length of the dissimilar joint is predicted and the time-temperature profile has also been generated. Besides, a Finite Element Model has been developed by using the numerical simulation Tool "ABAQUS". This developed FEM is helpful in predicting various output parameters during friction welding of this dissimilar joint combination.

GHGRP Minerals Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Minerals industry.

GHGRP Refineries Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Refineries industry.

GHGRP Chemicals Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Chemicals industry.

GHGRP Metals Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Metals industry.

Factors Affecting Radiologist's PACS Usage.

PubMed

Forsberg, Daniel; Rosipko, Beverly; Sunshine, Jeffrey L

2016-12-01

The purpose of this study was to determine if any of the factors radiologist, examination category, time of week, and week effect PACS usage, with PACS usage defined as the sequential order of computer commands issued by a radiologist in a PACS during interpretation and dictation. We initially hypothesized that only radiologist and examination category would have significant effects on PACS usage. Command logs covering 8 weeks of PACS usage were analyzed. For each command trace (describing performed activities of an attending radiologist interpreting a single examination), the PACS usage variables number of commands, number of command classes, bigram repetitiveness, and time to read were extracted. Generalized linear models were used to determine the significance of the factors on the PACS usage variables. The statistical results confirmed the initial hypothesis that radiologist and examination category affect PACS usage and that the factors week and time of week to a large extent have no significant effect. As such, this work provides direction for continued efforts to analyze system data to better understand PACS utilization, which in turn can provide input to enable optimal utilization and configuration of corresponding systems. These continued efforts were, in this work, exemplified by a more detailed analysis using PACS usage profiles, which revealed insights directly applicable to improve PACS utilization through modified system configuration.

GHGRP Miscellaneous Combustion Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Miscellaneous Combustion industry.

Archive of GHGRP Refineries Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Refineries industry.

GHGRP Power Plants Sector Industrial Profiles

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles, available for download below, contain detailed analyses for the Power Plants industry.

Archive of GHGRP Chemicals Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Chemicals industry.

GHGRP Electronics Manufacturing Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Electronics Manufacturing industry.

Gender differences in depressive symptom profiles and patterns of psychotropic drug usage in Asian patients with depression: Findings from the Research on Asian Psychotropic Prescription Patterns for Antidepressants study.

PubMed

Park, Seon-Cheol; Lee, Min-Soo; Shinfuku, Naotaka; Sartorius, Norman; Park, Yong Chon

2015-09-01

The purpose of this study was to investigate whether there were gender-specific depressive symptom profiles or gender-specific patterns of psychotropic agent usage in Asian patients with depression. Clinical data from the Research on Asian Psychotropic Prescription Patterns for Antidepressant study (1171 depressed patients) were used to determine gender differences by analysis of covariates for continuous variables and by logistic regression analysis for discrete variables. In addition, a binary logistic regression model was fitted to identify independent clinical correlates of the gender-specific pattern on psychotropic drug usage. Men were more likely than women to have loss of interest (adjusted odds ratio = 1.379, p = 0.009), fatigue (adjusted odds ratio = 1.298, p = 0.033) and concurrent substance abuse (adjusted odds ratio = 3.793, p = 0.008), but gender differences in other symptom profiles and clinical features were not significant. Men were also more likely than women to be prescribed adjunctive therapy with a second-generation antipsychotic (adjusted odds ratio = 1.320, p = 0.044). However, men were less likely than women to have suicidal thoughts/acts (adjusted odds ratio = 0.724, p = 0.028). Binary logistic regression models revealed that lower age (odds ratio = 0.986, p = 0.027) and current hospitalization (odds ratio = 3.348, p < 0.0001) were independent clinical correlates of use of second-generation antipsychotics as adjunctive therapy for treating depressed Asian men. Unique gender-specific symptom profiles and gender-specific patterns of psychotropic drug usage can be identified in Asian patients with depression. Hence, ethnic and cultural influences on the gender preponderance of depression should be considered in the clinical psychiatry of Asian patients. © The Royal Australian and New Zealand College of Psychiatrists 2015.

Archive of GHGRP Power Plants Sector Industrial Profiles

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles, available for download below, contain detailed analyses for the Power Plants industry.

GHGRP Pulp and Paper Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Pulp and Paper industry.

Motor carrier industry profile study : financial and operating performance profiles by industry segment, 2001-2002.

DOT National Transportation Integrated Search

2004-09-01

This report profiles the motor carrier industry and its significant operating segments. It is one of a series of reports analyzing various aspects of the motor carrier industry. Other reports in the series focus on the safety performance of the indus...

The Effectiveness of the Army and Navy Munitions Board during the Interwar Period

DTIC Science & Technology

2008-06-13

96  Comparison between the United States and the United Kingdom................................ 98  Comparison between the United States and Nazi ...industrial mobilization of Nazi Germany and the U.K. throughout the pre-war period and World War II. Specifically, the comparison will look at the...industrial mobilization of Nazi Germany in World War II, including armament production, industrial capabilities, the usage of raw materials, and labor

Robotics: A Bridge for Education and Technology.

ERIC Educational Resources Information Center

Warnat, Winifred I.

Robotics (robot usage) is discussed from a historical perspective with regard to its role in employment and education. Part 1 examines the transition from an industrial to an information society and speculates what the future might hold, particularly in terms of employment. Part 2 gives a historical overview of the robotics industry and discusses…

Differential TCR Vbeta Usage in the Peripheral T Cells of Chickens Resistant and Susceptible to Marek’s Disease

USDA-ARS?s Scientific Manuscript database

Marek's disease (MD) is a herpesvirus-induced lymphoma in chickens with a significant economic impact to the poultry industry, costing the industry over $1 billion annually worldwide. MD is controllable by vaccination and improving genetic resistance in the host. Two inbred layer lines, matched at...

Information System Training, Usage, and Satisfaction: An Exploratory Study of the Hospitality Industry.

ERIC Educational Resources Information Center

Gardner, William L., III; Gundersen, David E.

1995-01-01

Discusses use of a mail survey to study the extent to which the hospitality industry employs various information technologies, including computer-mediated communication systems. Finds that hotel/motel size and chain affiliation are related to information system complexity, and that chain-affiliated hotels provide less computer and…

Internet Usage and Competitive Advantage: The Impact of the Internet on an Old Economy Industry in Spain.

ERIC Educational Resources Information Center

del Aguila Obra, Ana Rosa; Bruque Camara, Sebastian; Padilla Melendez, Antonio

2002-01-01

Considers whether Internet technologies have led to competitive advantage for companies operating in traditional industries. Highlights include a literature review; using the resource-based view (RBV) of firms as a theoretical framework for an empirical investigation; and a survey that investigated Internet technologies and competitive advantage…

Accessibility Marking: Discourse Functions, Discourse Profiles, and Processing Cues

ERIC Educational Resources Information Center

Ariel, Mira

2004-01-01

When accounting for the usage of some linguistic form, one can refer to its discourse profile, all concomitant features frequently co-occurring with that form in discourse, or abstract a more general claim about its discourse function, referring only to the necessary and sufficient conditions for the proper occurrence of the form. This article…

OTV Propulsion Issues

NASA Technical Reports Server (NTRS)

1984-01-01

The statistical technology needs of aero-assist maneuvering, propulsion, and usage of cryogenic fluids were presented. Industry panels discussed the servicing of reusable space based vehicles and propulsion-vehicle interation.

Rotorcraft Health and Usage Monitoring Systems - A Literature Survey

DTIC Science & Technology

1991-05-01

34"... ". , :’ " "Diot Lic lal Technical Report Documentaton Page 1. Report No. 2. Government Accession No. 3 . Recipient’s Catalog No. DOT/FAANRD-91/6 4...2 1.2.4 Data Sources ................................. 3 1.2.5 Industry Survey Products ..................... 3 2 .0 Overview...work being accomplished is being provided to the FAA. 3 2.0 OVERVIEW This report covers the results of the health and usage monitoring literature search

Infrastructure, Components and System Level Testing and Analysis of Electric Vehicles: Cooperative Research and Development Final Report, CRADA Number CRD-09-353

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neubauer, J.

2013-05-01

Battery technology is critical for the development of innovative electric vehicle networks, which can enhance transportation sustainability and reduce dependence on petroleum. This cooperative research proposed by Better Place and NREL will focus on predicting the life-cycle economics of batteries, characterizing battery technologies under various operating and usage conditions, and designing optimal usage profiles for battery recharging and use.

Monitoring and risk assessment of polychlorinated biphenyls (PCBs) in agricultural soil from two industrialized areas.

PubMed

Kim, Leesun; Jeon, Jin-Woo; Son, Ji-Young; Park, Min-Kyu; Kim, Chul-Su; Jeon, Hwang-Ju; Nam, Tae-Hoon; Kim, Kyeongsoon; Park, Byung-Jun; Choi, Sung-Deuk; Lee, Sung-Eun

2017-04-01

For monitoring and risk assessment, levels and distributions of Σ 29 PCBs in paddy soil samples collected from Gwangyang (10 sites) and Ulsan (20 sites), heavily industrialized cities in Korea, were investigated using high-resolution gas chromatography/high-resolution mass spectrometry. Overall, total concentrations of Σ 29 PCBs in Gwangyang (216.4-978.6 pg g -1 dw) and Ulsan (273.8-1824.1 pg g -1 dw) were higher than those (106.6-222.6 pg g -1 dw) in agricultural soil from Anseong in Korea. The TEQ (toxic equivalency) values from Gwangyang (0.06-0.40 ng TEQ kg -1 dw) and Ulsan (0.06-0.22 ng TEQ kg -1 dw) were higher than those (0.04-0.11 ng TEQ kg -1 dw) in Anseong but lower than the WHO threshold level (20 ng TEQ kg -1 ). However, one of the most toxic congeners, PCB 126, gave the highest concentration, possibly posing a risk to the biota. Seven indicator PCB congeners contributed to 50-80% of the total concentration of Σ 29 PCBs, indicating the 7 PCBs can be used as valuable indicators for monitoring. The principal component analysis and cluster analysis for the homologue profiles of PCBs indicated that all the samples from both cities had the similar PCB contamination patterns, and the major sources of the PCB contamination were most likely from the usage of Aroclor 1254 than those of Aroclors 1242 and 1260. These PCB technical mixtures were possibly significantly used by various industries including iron and steel industries in Gwangyang and petrochemical and shipbuilding industries in Ulsan.

Codon usage affects the structure and function of the Drosophila circadian clock protein PERIOD.

PubMed

Fu, Jingjing; Murphy, Katherine A; Zhou, Mian; Li, Ying H; Lam, Vu H; Tabuloc, Christine A; Chiu, Joanna C; Liu, Yi

2016-08-01

Codon usage bias is a universal feature of all genomes, but its in vivo biological functions in animal systems are not clear. To investigate the in vivo role of codon usage in animals, we took advantage of the sensitivity and robustness of the Drosophila circadian system. By codon-optimizing parts of Drosophila period (dper), a core clock gene that encodes a critical component of the circadian oscillator, we showed that dper codon usage is important for circadian clock function. Codon optimization of dper resulted in conformational changes of the dPER protein, altered dPER phosphorylation profile and stability, and impaired dPER function in the circadian negative feedback loop, which manifests into changes in molecular rhythmicity and abnormal circadian behavioral output. This study provides an in vivo example that demonstrates the role of codon usage in determining protein structure and function in an animal system. These results suggest a universal mechanism in eukaryotes that uses a codon usage "code" within genetic codons to regulate cotranslational protein folding. © 2016 Fu et al.; Published by Cold Spring Harbor Laboratory Press.

Proposed Demolition of Hangars; Projects 11-0098-11-0102 Environmental Assessment

DTIC Science & Technology

2012-03-22

decrease its space and energy use • Be compliant with current land use zoning ( Industrial ) • Not violate any provisions of the National Historic... industrial usage of the hangars, contamination of shallow soil is known to exist beneath or adjacent to the structures undergoing demolition and...buildings occur in an industrial part of the base which has already been heavily disturbed due to past construction activities. The buildings proposed for

Characterization of the porcine epidemic diarrhea virus codon usage bias.

PubMed

Chen, Ye; Shi, Yuzhen; Deng, Hongjuan; Gu, Ting; Xu, Jian; Ou, Jinxin; Jiang, Zhiguo; Jiao, Yiren; Zou, Tan; Wang, Chong

2014-12-01

Porcine epidemic diarrhea virus (PEDV) has been responsible for several recent outbreaks of porcine epidemic diarrhea (PED) and has caused great economic loss in the swine-raising industry. Considering the significance of PEDV, a systemic analysis was performed to study its codon usage patterns. The relative synonymous codon usage value of each codon revealed that codon usage bias exists and that PEDV tends to use codons that end in T. The mean ENC value of 47.91 indicates that the codon usage bias is low. However, we still wanted to identify the cause of this codon usage bias. A correlation analysis between the codon compositions (A3s, T3s, G3s, C3s, and GC3s), the ENC values, and the nucleotide contents (A%, T%, G%, C%, and GC%) indicated that mutational bias plays role in shaping the PEDV codon usage bias. This was further confirmed by a principal component analysis between the codon compositions and the axis values. Using the Gravy, Aroma, and CAI values, a role of natural selection in the PEDV codon usage pattern was also identified. Neutral analysis indicated that natural selection pressure plays a more important role than mutational bias in codon usage bias. Natural selection also plays an increasingly significant role during PEDV evolution. Additionally, gene function and geographic distribution also influence the codon usage bias to a degree. Copyright © 2014 Elsevier B.V. All rights reserved.

Game-Theoretic Models for Usage-based Maintenance Contract

NASA Astrophysics Data System (ADS)

Husniah, H.; Wangsaputra, R.; Cakravastia, A.; Iskandar, B. P.

2018-03-01

A usage-based maintenance contracts with coordination and non coordination between two parties is studied in this paper. The contract is applied to a dump truck operated in a mining industry. The situation under study is that an agent offers service contract to the owner of the truck after warranty ends. This contract has only a time limit but no usage limit. If the total usage per period exceeds the maximum usage allowed in the contract, then the owner will be charged an additional cost. In general, the agent (Original Equipment Manufacturer/OEM) provides a full coverage of maintenance, which includes PM and CM under the lease contract. The decision problem for the owner is to select the best option offered that fits to its requirement, and the decision problem for the agent is to find the optimal maintenance efforts for a given price of the service option offered. We first find the optimal decisions using coordination scheme and then with non coordination scheme for both parties.

An initial log analysis of usage patterns on a research networking system.

PubMed

Boland, Mary Regina; Trembowelski, Sylvia; Bakken, Suzanne; Weng, Chunhua

2012-08-01

Usage data for research networking systems (RNSs) are valuable but generally unavailable for understanding scientific professionals' information needs and online collaborator seeking behaviors. This study contributes a method for evaluating RNSs and initial usage knowledge of one RNS obtained from using this method. We designed a log for an institutional RNS, defined categories of users and tasks, and analyzed correlations between usage patterns and user and query types. Our results show that scientific professionals spend more time performing deep Web searching on RNSs than generic Google users and we also show that retrieving scientist profiles is faster on an RNS than on Google (3.5 seconds vs. 34.2 seconds) whereas organization-specific browsing on a RNS takes longer than on Google (117.0 seconds vs. 34.2 seconds). Usage patterns vary by user role, e.g., faculty performed more informational queries than administrators, which implies role-specific user support is needed for RNSs. © 2012 Wiley Periodicals, Inc.

An Initial Log Analysis of Usage Patterns on a Research Networking System

PubMed Central

Boland, Mary Regina; Trembowelski, Sylvia; Bakken, Suzanne; Weng, Chunhua

2012-01-01

Abstract Usage data for research networking systems (RNSs) are valuable but generally unavailable for understanding scientific professionals’ information needs and online collaborator seeking behaviors. This study contributes a method for evaluating RNSs and initial usage knowledge of one RNS obtained from using this method. We designed a log for an institutional RNS, defined categories of users and tasks, and analyzed correlations between usage patterns and user and query types. Our results show that scientific professionals spend more time performing deep Web searching on RNSs than generic Google users and we also show that retrieving scientist profiles is faster on an RNS than on Google (3.5 seconds vs. 34.2 seconds) whereas organization‐specific browsing on a RNS takes longer than on Google (117.0 seconds vs. 34.2 seconds). Usage patterns vary by user role, e.g., faculty performed more informational queries than administrators, which implies role‐specific user support is needed for RNSs. Clin Trans Sci 2012; Volume 5: 340–347 PMID:22883612

A review and evaluation of the Langley Research Center's Scientific and Technical Information Program. Results of phase 4: Knowledge and attitudes survey, academic and industrial personnel

NASA Technical Reports Server (NTRS)

Pinelli, T. E.; Glassman, M.; Glassman, N. A.

1981-01-01

Feedback from engineers and scientists in the academic and industrial community provided an assessment of the usage and perceived quality of NASA Langley generated STI and the familiarity and usage of selected NASA publications and services and identified ways to increase the accessibility of Langley STI. The questionnaire utilized both open and closed ended questions and was pretested for finalization. The questions were organized around the seven objectives for Phase IV. From a contact list of nearly 1,200 active industrial and academic researchers, approximately 600 addresses were verified. The 497 persons who agreed to participate were mailed questionnaires. The 381 completed questionnaires received by the cutoff date were analyzed. Based on the survey findings, recommendations were made for increasing the familiarity with and use of NASA and Langley STI and selected NASA publications and services. In addition, recommendations were made for increasing the accessibility of Langley STI.

Quantitative Comparison and Metabolite Profiling of Saponins in Different Parts of the Root of Panax notoginseng

PubMed Central

2015-01-01

Although both rhizome and root of Panax notoginseng are officially utilized as notoginseng in “Chinese Pharmacopoeia”, individual parts of the root were differently used in practice. To provide chemical evidence for the differentiated usage, quantitative comparison and metabolite profiling of different portions derived from the whole root, as well as commercial samples, were carried out, showing an overall higher content of saponins in rhizome, followed by main root, branch root, and fibrous root. Ginsenoside Rb2 was proposed as a potential marker with a content of 0.5 mg/g as a threshold value for differentiating rhizome from other parts. Multivariate analysis of the metabolite profile further suggested 32 saponins as potential markers for the discrimination of different parts of notoginseng. Collectively, the study provided comprehensive chemical evidence for the distinct usage of different parts of notoginseng and, hence, is of great importance for the rational application and exploitation of individual parts of notoginseng. PMID:25118819

Effect of Solid Biological Waste Compost on the Metabolite Profile of Brassica rapa ssp. chinensis

PubMed Central

Neugart, Susanne; Wiesner-Reinhold, Melanie; Frede, Katja; Jander, Elisabeth; Homann, Thomas; Rawel, Harshadrai M.; Schreiner, Monika; Baldermann, Susanne

2018-01-01

Large quantities of biological waste are generated at various steps within the food production chain and a great utilization potential for this solid biological waste exists apart from the current main usage for the feedstuff sector. It remains unclear how the usage of biological waste as compost modulates plant metabolites. We investigated the effect of biological waste of the processing of coffee, aronia, and hop added to soil on the plant metabolite profile by means of liquid chromatography in pak choi sprouts. Here we demonstrate that the solid biological waste composts induced specific changes in the metabolite profiles and the changes are depending on the type of the organic residues and its concentration in soil. The targeted analysis of selected plant metabolites, associated with health beneficial properties of the Brassicaceae family, revealed increased concentrations of carotenoids (up to 3.2-fold) and decreased amounts of glucosinolates (up to 4.7-fold) as well as phenolic compounds (up to 1.5-fold). PMID:29616051

Energy and the English Industrial Revolution.

PubMed

Wrigley, E A

2013-03-13

Societies before the Industrial Revolution were dependent on the annual cycle of plant photosynthesis for both heat and mechanical energy. The quantity of energy available each year was therefore limited, and economic growth was necessarily constrained. In the Industrial Revolution, energy usage increased massively and output rose accordingly. The energy source continued to be plant photosynthesis, but accumulated over a geological age in the form of coal. This poses a problem for the future. Fossil fuels are a depleting stock, whereas in pre-industrial time the energy source, though limited, was renewed each year.

Dust control technology usage patterns in the drywall finishing industry.

PubMed

Young-Corbett, Deborah E; Nussbaum, Maury A

2009-06-01

A telephone survey was conducted to quantify drywall finishing industry usage rates of dust control technology, identify barriers to technology adoption, and explore firm owner perception of risk. Industry use of the following technologies was described: wet methods, respiratory protection, pole sanders, ventilated sanders, and low-dust joint compound. A survey instrument composed of both Likert-type scaled items and open-ended items was developed and administered by telephone to the census population of the owners of member firms of trade associations: Finishing Contractors Association and Association of the Wall and Ceiling Industries. Of 857 firms, 264 interviews were completed. Along with descriptive statistics, results were analyzed to examine effects of firm size and union affiliation on responses. Responses to open-ended items were analyzed using content analysis procedures. Firm owners rated the risk of dust to productivity and customer satisfaction as low-moderate. Half rated the dust as having some impact on worker health, with higher impacts indicated by owners of small firms. Among the available control technologies, respiratory protection was used most frequently. Several barriers to implementation of the more effective control technologies were identified. Barriers associated with technology usability, productivity, and cost, as well as misperceptions of risk, should be addressed to improve dust control in the drywall finishing industry.

Middle Management Time Usage.

ERIC Educational Resources Information Center

Dorin, Patrick C.; Mansergh, Gerald G.

1980-01-01

Elementary principals and industrial managers are involved in similar job activities, but they differ in the amount of time spent in each activity and in the degree of interaction with others. (Author/JM)

Motor carrier industry profile : an update 2004-2005.

DOT National Transportation Integrated Search

2005-08-01

This report updates the Motor Carrier Industry Profile: 2001-20031 and Stock Market Performance of Publicly Traded Trucking Sector Stocks by Industry Segment, 2000-20042 to reflect more recent developments of particular significance to the industry a...

Nebraska Industrial Technology Education Teachers Identify the Equipment Their Students Use.

ERIC Educational Resources Information Center

Rogers, George E.

A study asked 287 industrial technology education (ITE) teachers in Nebraska to identify what equipment was being used by ITE students. It also compared ITE equipment usage with regard to school type and school size. The response rate was 59.2 percent (n=170). Findings indicated the drill press and band saw were the most widely used pieces of…

GHGRP Industrial Profiles

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses. This page hosts data highlights for all sectors.

Association between attitudes towards Internet usage and health practices in high-school students in 2 schools in Turkey: a cross-sectional study.

PubMed

Kaya, N; Aşti, T; Kaya, I; Yaylaci, S; Kaya, H; Turan, N; Aydin, G Özdemir

2017-02-01

Excessive usage of the Internet can negatively affect health and health practices especially among youth. To examine the issue among Turkish students, this study determined the association between high-school students' attitudes towards Internet usage and their health behaviour. The sample (n = 2043) was randomly drawn from all students at two high schools in Turkey: one in Anatolia and one (a vocational school) in Istanbul. Data were collected using the Structured Questionnaire, Attitude Scale towards Internet Usage (ASTIU) and Adolescent Lifestyle Profile (ALP). The mean age of the students was 16.3 years, 77.7% were male and 96.9% used the Internet; mean duration of Internet use was 18.8 h/week. Female students had more positive attitudes towards Internet usage. Mean scores for ASTIU and ALP were 72.58 (SD 17.64) and 111.34 (SD 16.61) respectively, which were average levels. There was a statistically significant but weak overall negative correlation between adolescents' attitudes towards Internet usage and their health behaviour. Our results concur with studies in different cultures which suggest some negative effects, of heavy Internet use.

The effect of surface pre-conditioning treatments on the local composition of Zr-based conversion coatings formed on aluminium alloys

NASA Astrophysics Data System (ADS)

Cerezo, J.; Vandendael, I.; Posner, R.; de Wit, J. H. W.; Mol, J. M. C.; Terryn, H.

2016-03-01

This study investigates the effect of different alkaline, acidic and thermal pre-conditioning treatments applied to different Al alloy surfaces. The obtained results are compared to the characteristics of Zr-based conversion coatings that were subsequently generated on top of these substrates. Focus is laid on typical elemental distributions on the sample surfaces, in particular on the amount of precipitated functional additives such as Cu species that are present in the substrate matrix as well as in the conversion bath solutions. To this aim, Field Emission Auger Electron spectra, depth profiles and surface maps with superior local resolution were acquired and compared to scanning electron microscopy images of the sample. The results show how de-alloying processes, which occur at and around intermetallic particles in the Al matrix during typical industrial alkaline or acidic cleaning procedures, provide a significant source of crystallization cores for any following coating processes. This is in particular due for Cu-species, as the resulting local Cu structures on the surface strongly affect the film formation and compositions of state-of-the-art Zr-based films. The findings are highly relevant for industrial treatments of aluminium surfaces, especially for those that undergo corrosion protection and painting process steps prior to usage.

A Cross-Cultural Examination of SNS Usage Intensity and Managing Interpersonal Relationships Online: The Role of Culture and the Autonomous-Related Self-Construal.

PubMed

Lee, Soon Li; Kim, Jung-Ae; Golden, Karen Jennifer; Kim, Jae-Hwi; Park, Miriam Sang-Ah

2016-01-01

Perception of the autonomy and relatedness of the self may be influenced by one's experiences and social expectations within a particular cultural setting. The present research examined the role of culture and the Autonomous-Related self-construal in predicting for different aspects of Social Networking Sites (SNS) usage in three Asian countries, especially focusing on those aspects serving interpersonal goals. Participants in this cross-cultural study included 305 university students from Malaysia (n = 105), South Korea (n = 113), and China (n = 87). The study explored specific social and interpersonal behaviors on SNS, such as browsing the contacts' profiles, checking for updates, and improving contact with SNS contacts, as well as the intensity of SNS use, hypothesizing that those with high intensity of use in the Asian context may be doing so to achieve the social goal of maintaining contact and keeping updated with friends. Two scales measuring activities on other users' profiles and contact with friends' profiles were developed and validated. As predicted, some cross-cultural differences were found. Koreans were more likely to use SNS to increase contact but tended to spend less time browsing contacts' profiles than the Malaysians and Chinese. The intensity of SNS use differed between the countries as well, where Malaysians reported higher intensity than Koreans and Chinese. Consistent with study predictions, Koreans were found with the highest Autonomous-Related self-construal scores. The Autonomous-Related self-construal predicted SNS intensity. The findings suggest that cultural contexts, along with the way the self is construed in different cultures, may encourage different types of SNS usage. The authors discuss study implications and suggest future research directions.

A Cross-Cultural Examination of SNS Usage Intensity and Managing Interpersonal Relationships Online: The Role of Culture and the Autonomous-Related Self-Construal

PubMed Central

Lee, Soon Li; Kim, Jung-Ae; Golden, Karen Jennifer; Kim, Jae-Hwi; Park, Miriam Sang-Ah

2016-01-01

Perception of the autonomy and relatedness of the self may be influenced by one's experiences and social expectations within a particular cultural setting. The present research examined the role of culture and the Autonomous-Related self-construal in predicting for different aspects of Social Networking Sites (SNS) usage in three Asian countries, especially focusing on those aspects serving interpersonal goals. Participants in this cross-cultural study included 305 university students from Malaysia (n = 105), South Korea (n = 113), and China (n = 87). The study explored specific social and interpersonal behaviors on SNS, such as browsing the contacts' profiles, checking for updates, and improving contact with SNS contacts, as well as the intensity of SNS use, hypothesizing that those with high intensity of use in the Asian context may be doing so to achieve the social goal of maintaining contact and keeping updated with friends. Two scales measuring activities on other users' profiles and contact with friends' profiles were developed and validated. As predicted, some cross-cultural differences were found. Koreans were more likely to use SNS to increase contact but tended to spend less time browsing contacts' profiles than the Malaysians and Chinese. The intensity of SNS use differed between the countries as well, where Malaysians reported higher intensity than Koreans and Chinese. Consistent with study predictions, Koreans were found with the highest Autonomous-Related self-construal scores. The Autonomous-Related self-construal predicted SNS intensity. The findings suggest that cultural contexts, along with the way the self is construed in different cultures, may encourage different types of SNS usage. The authors discuss study implications and suggest future research directions. PMID:27148100

How Social Are We? A Cross-Sectional Study of the Website Presence and Social Media Activity of Canadian Plastic Surgeons.

PubMed

McEvenue, Giancarlo; Copeland, Andrea; Devon, Karen M; Semple, John L

2016-10-01

The internet and social media are increasingly being used by patients not only for health-related research, but also for obtaining information on their surgeon. Having an online presence via a website and social media profile is one-way plastic surgeons can meet this patient driven demand. The authors sought to document current website and social media usage of Canadian plastic surgeons and to determine if this usage correlated with years in practice. A Google search was performed using publicly available lists of all plastic surgeons registered with the Royal College of Physicians and Surgeons of Canada (RCPSC) and the Canadian Society for Aesthetic Plastic Surgery (CSAPS). This search found 42% (268/631) of RCPSC plastic surgeons had a website and 85% (536/631) had a profile on social media. Younger RCPSC surgeons (registered for less years) were significantly more likely to have a website (12.8 vs. 21.9 years, P < 0.0001) and an active social media profile (16.2 vs. 23.9 years, P < 0.002). The social media platform most used was RateMDs (81%) followed in decreasing order by: LinkedIn (28%), RealSelf (22%), Facebook (20%), Google+ (17%) and Twitter (16%). Dual RCPSC-CSAPS members were more likely than RCPSC-only members to have a website (56 vs. 36%, P < 0.0001) and an active social media profile (P < 0.05). Overall, current website usage and social media presence by Canadian plastic surgeons is comparable to counterparts in the US and UK. It may be possible to better optimize online presence through education of current search engine technology and becoming active on multiple social media platforms. © 2016 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

High-Throughput In Vivo Genotoxicity Testing: An Automated Readout System for the Somatic Mutation and Recombination Test (SMART)

PubMed Central

Kwak, Jihoon; Genovesio, Auguste; Kang, Myungjoo; Hansen, Michael Adsett Edberg; Han, Sung-Jun

2015-01-01

Genotoxicity testing is an important component of toxicity assessment. As illustrated by the European registration, evaluation, authorization, and restriction of chemicals (REACH) directive, it concerns all the chemicals used in industry. The commonly used in vivo mammalian tests appear to be ill adapted to tackle the large compound sets involved, due to throughput, cost, and ethical issues. The somatic mutation and recombination test (SMART) represents a more scalable alternative, since it uses Drosophila, which develops faster and requires less infrastructure. Despite these advantages, the manual scoring of the hairs on Drosophila wings required for the SMART limits its usage. To overcome this limitation, we have developed an automated SMART readout. It consists of automated imaging, followed by an image analysis pipeline that measures individual wing genotoxicity scores. Finally, we have developed a wing score-based dose-dependency approach that can provide genotoxicity profiles. We have validated our method using 6 compounds, obtaining profiles almost identical to those obtained from manual measures, even for low-genotoxicity compounds such as urethane. The automated SMART, with its faster and more reliable readout, fulfills the need for a high-throughput in vivo test. The flexible imaging strategy we describe and the analysis tools we provide should facilitate the optimization and dissemination of our methods. PMID:25830368

PRN 2011-1: Residential Exposure Joint Venture

EPA Pesticide Factsheets

This PR Notice is to advise registrants of an industry-wide joint venture, titled the Residential Exposure Joint Venture (REJV), which has developed a national survey regarding residential consumer use/usage data for pesticides.

The Computer Industry. High Technology Industries: Profiles and Outlooks.

ERIC Educational Resources Information Center

International Trade Administration (DOC), Washington, DC.

A series of meetings was held to assess future problems in United States high technology, particularly in the fields of robotics, computers, semiconductors, and telecommunications. This report, which focuses on the computer industry, includes a profile of this industry and the papers presented by industry speakers during the meetings. The profile…

Modeling Battery Behavior on Sensory Operations for Context-Aware Smartphone Sensing

PubMed Central

Yurur, Ozgur; Liu, Chi Harold; Moreno, Wilfrido

2015-01-01

Energy consumption is a major concern in context-aware smartphone sensing. This paper first studies mobile device-based battery modeling, which adopts the kinetic battery model (KiBaM), under the scope of battery non-linearities with respect to variant loads. Second, this paper models the energy consumption behavior of accelerometers analytically and then provides extensive simulation results and a smartphone application to examine the proposed sensor model. Third, a Markov reward process is integrated to create energy consumption profiles, linking with sensory operations and their effects on battery non-linearity. Energy consumption profiles consist of different pairs of duty cycles and sampling frequencies during sensory operations. Furthermore, the total energy cost by each profile is represented by an accumulated reward in this process. Finally, three different methods are proposed on the evolution of the reward process, to present the linkage between different usage patterns on the accelerometer sensor through a smartphone application and the battery behavior. By doing this, this paper aims at achieving a fine efficiency in power consumption caused by sensory operations, while maintaining the accuracy of smartphone applications based on sensor usages. More importantly, this study intends that modeling the battery non-linearities together with investigating the effects of different usage patterns in sensory operations in terms of the power consumption and the battery discharge may lead to discovering optimal energy reduction strategies to extend the battery lifetime and help a continual improvement in context-aware mobile services. PMID:26016916

Modeling battery behavior on sensory operations for context-aware smartphone sensing.

PubMed

Yurur, Ozgur; Liu, Chi Harold; Moreno, Wilfrido

2015-05-26

Energy consumption is a major concern in context-aware smartphone sensing. This paper first studies mobile device-based battery modeling, which adopts the kinetic battery model (KiBaM), under the scope of battery non-linearities with respect to variant loads. Second, this paper models the energy consumption behavior of accelerometers analytically and then provides extensive simulation results and a smartphone application to examine the proposed sensor model. Third, a Markov reward process is integrated to create energy consumption profiles, linking with sensory operations and their effects on battery non-linearity. Energy consumption profiles consist of different pairs of duty cycles and sampling frequencies during sensory operations. Furthermore, the total energy cost by each profile is represented by an accumulated reward in this process. Finally, three different methods are proposed on the evolution of the reward process, to present the linkage between different usage patterns on the accelerometer sensor through a smartphone application and the battery behavior. By doing this, this paper aims at achieving a fine efficiency in power consumption caused by sensory operations, while maintaining the accuracy of smartphone applications based on sensor usages. More importantly, this study intends that modeling the battery non-linearities together with investigating the effects of different usage patterns in sensory operations in terms of the power consumption and the battery discharge may lead to discovering optimal energy reduction strategies to extend the battery lifetime and help a continual improvement in context-aware mobile services.

GHGRP Petroleum and Natural Gas Systems Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses for Petroleum and Natural Gas Systems.

Phytochemical screening, anticancer and antioxidant activities of Origanum vulgare L. ssp. viride (Boiss.) Hayek, a plant of traditional usage.

PubMed

Koldaş, Serkan; Demirtas, Ibrahim; Ozen, Tevfik; Demirci, Mehmet Ali; Behçet, Lütfi

2015-03-15

A detailed phytochemical analysis of Origanum vulgare L. ssp. viride (Boiss.) Hayek was carried out and the antioxidant activities of five different crude extracts were determined. The antiproliferative activities of the extracts were determined using the xCELLigence system (Real Time Cell Analyzer). Differences between the essential oil and volatile organic compound profiles of the plant were shown. The main component of the essential oil was caryophyllene oxide, while the main volatile organic compounds were sabinene and eucalyptol as determined by HS-GC/MS. Phenolic contents of the extracts were determined qualitatively and quantitatively by HPLC/TOF-MS. Ten phenolic compounds were found in the extracts from O. vulgare and Origanum acutidens: rosmarinic acid (in highest abundance), chicoric acid, caffeic acid, p-coumaric acid, gallic acid, quercetin, apigenin-7-glucoside, kaempferol, naringenin and 4-hydroxybenzaldehyde. This study provides first results on the antiproliferative and antioxidant properties and detailed phytochemical screening of O. vulgare ssp. viride (Boiss.) Hayek. © 2014 Society of Chemical Industry.

Railroad industry modal profile: an outline of the railroad industry workforce trends, challenges, and opportunities - update : final report.

DOT National Transportation Integrated Search

2016-04-01

In 2011, the Federal Railroad Administration (FRA) Office of Research, Development, and Technology (RD&T) published the : first edition of the Railroad Industry Modal Profile: An Outline of the Railroad Industry Workforce Trends, Challenges, and :...

The Academic English Language Needs of Industrial Design Students in UiTM Kedah, Malaysia

ERIC Educational Resources Information Center

Adzmi, Nor Aslah; Bidin, Samsiah; Ibrahim, Syazliyati; Jusoff, Kamaruzaman

2009-01-01

The purpose of this study was to analyse the academic English language lacks and needs of Industrial Design students in Universiti Teknologi MARA Kedah (UiTM). It highlights the lacks and needs for English for Academic Purposes in helping the students to succeed in the program through the usage of English language. The research tools used were in…

Archive of GHGRP Petroleum and Natural Gas Systems Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses for Petroleum and Natural Gas Systems.

Effectively identifying user profiles in network and host metrics

NASA Astrophysics Data System (ADS)

Murphy, John P.; Berk, Vincent H.; Gregorio-de Souza, Ian

2010-04-01

This work presents a collection of methods that is used to effectively identify users of computers systems based on their particular usage of the software and the network. Not only are we able to identify individual computer users by their behavioral patterns, we are also able to detect significant deviations in their typical computer usage over time, or compared to a group of their peers. For instance, most people have a small, and relatively unique selection of regularly visited websites, certain email services, daily work hours, and typical preferred applications for mandated tasks. We argue that these habitual patterns are sufficiently specific to identify fully anonymized network users. We demonstrate that with only a modest data collection capability, profiles of individual computer users can be constructed so as to uniquely identify a profiled user from among their peers. As time progresses and habits or circumstances change, the methods presented update each profile so that changes in user behavior can be reliably detected over both abrupt and gradual time frames, without losing the ability to identify the profiled user. The primary benefit of our methodology allows one to efficiently detect deviant behaviors, such as subverted user accounts, or organizational policy violations. Thanks to the relative robustness, these techniques can be used in scenarios with very diverse data collection capabilities, and data privacy requirements. In addition to behavioral change detection, the generated profiles can also be compared against pre-defined examples of known adversarial patterns.

Lean energy analysis of CNC lathe

NASA Astrophysics Data System (ADS)

Liana, N. A.; Amsyar, N.; Hilmy, I.; Yusof, MD

2018-01-01

The industrial sector in Malaysia is one of the main sectors that have high percentage of energy demand compared to other sector and this problem may lead to the future power shortage and increasing the production cost of a company. Suitable initiatives should be implemented by the industrial sectors to solve the issues such as by improving the machining system. In the past, the majority of the energy consumption in industry focus on lighting, HVAC and office section usage. Future trend, manufacturing process is also considered to be included in the energy analysis. A study on Lean Energy Analysis in a machining process is presented. Improving the energy efficiency in a lathe machine by enhancing the cutting parameters of turning process is discussed. Energy consumption of a lathe machine was analyzed in order to identify the effect of cutting parameters towards energy consumption. It was found that the combination of parameters for third run (spindle speed: 1065 rpm, depth of cut: 1.5 mm, feed rate: 0.3 mm/rev) was the most preferred and ideal to be used during the turning machining process as it consumed less energy usage.

Unintended environmental consequences and co-benefits of economic restructuring.

PubMed

Liang, Sai; Xu, Ming; Suh, Sangwon; Tan, Raymond R

2013-11-19

Current economic restructuring policies have ignored unintended environmental consequences and cobenefits, the understanding of which can provide foundations for effective policy decisions for green economy transformation. Using the input-output life cycle assessment model and taking China as an example, we find that household consumption, fixed capital formation, and export are main drivers to China's environmental impacts. At the product scale, major contributors to environmental impacts vary across different types of impacts. Stimulating the development of seven strategic emerging industries will cause unintended consequences, such as increasing nonferrous metal ore usage, terrestrial acidification, photochemical oxidant formation, human toxicity, and terrestrial ecotoxicity. Limiting the surplus outputs in the construction materials industry and metallurgy industry may only help mitigate some of the environmental impacts caused by China's regulated pollutants, with little effect on reducing other impacts, such as marine eutrophication, terrestrial acidification, photochemical oxidant formation, and particulate matter formation. However, it will bring cobenefits by simultaneously reducing mineral ore usage, human toxicity, marine ecotoxicity, and terrestrial ecotoxicity. Sustainable materials management and integrated policy modeling are possible ways for policy-making to avoid unintended consequences and effectively utilize cobenefits.

Industrial waste utilization for foam concrete

NASA Astrophysics Data System (ADS)

Krishnan, Gokul; Anand, K. B.

2018-02-01

Foam concrete is an emerging and useful construction material - basically a cement based slurry with at least 10% of mix volume as foam. The mix usually containing cement, filler (usually sand) and foam, have fresh densities ranging from 400kg/m3 to 1600kg/m3. One of the main drawbacks of foam concrete is the large consumption of fine sand as filler material. Usage of different solid industrial wastes as fillers in foam concrete can reduce the usage of fine river sand significantly and make the work economic and eco-friendly. This paper aims to investigate to what extent industrial wastes such as bottom ash and quarry dust can be utilized for making foam concrete. Foam generated using protein based agent was used for preparing and optimizing (fresh state properties). Investigation to find the influence of design density and air-void characteristics on the foam concrete strength shows higher strength for bottom ash mixes due to finer air void distribution. Setting characteristics of various mix compositions are also studied and adoption of Class C flyash as filler demonstrated capability of faster setting.

INDUSTRIAL PROCESS PROFILES FOR ENVIRONMENTAL USE: CHAPTER 30. THE ELECTRONIC COMPONENT MANUFACTURING INDUSTRY

EPA Science Inventory

This report is one of a series constituting the catalog of Industrial Process Profiles for Environmental Use. Each industry sector is addressed as a separate chapter of the study. The catalog was developed for the purpose of compiling relevant information concerning air, water, a...

Behavioural Profiles of Brown and Sloth Bears in Captivity

PubMed Central

Quintavalle Pastorino, Giovanni; Christodoulides, Yiannis; Curone, Giulio; Pearce-Kelly, Paul; Faustini, Massimo; Albertini, Mariangela; Preziosi, Richard; Mazzola, Silvia Michela

2017-01-01

Simple Summary Animal personality research is a growing field, since understanding animal personalities has notable implications in ecology and the evolution of animal behaviours. In the current study, we tested different methods described in the literature to obtain robust individual behavioural profiles. Data collected through behavioral observations were categorised into activity budgets, space usage, and social interactions for each individual. In addition, behavioural profile questionnaires were completed by the three zoo keepers who had regular interactions with the bears. The questionnaires included 22 adjectives, which were rated on a scale of 1–12 depending on how well they described each individual bear. The mean ratings of the keepers were used to create the behavioural profiles by adding the adjectives to the appropriate domains, according to the NEO Five Factor Inventory of personality model (NEO-FFI). The data gathered was used to produce behavioural profiles for all animals, in order to clarify the personality characteristics of each subject. Testing and improving existing methodologies to determine animal personality is important for providing optimal welfare and management of captive animals, since it can help to develop more effective management regimes in zoos by remodelling husbandry according to each animal’s personality type. Abstract Three brown bear (Ursus arctos arctos) individuals and two sloth bear (Melursus ursinus inornatus) individuals were observed in captivity to produce behavioural profiles for each individual. Data collected through behavioural observations were used to produce activity budgets, and to identify space usage and certain aspects of social behavior. Behaviour monitoring allowed the researchers to evaluate the welfare of the animals by identifying the occurrence of stereotypic behaviours, which are sometimes associated with stress. Behavioural profiles were created using data obtained through behavioural observations (coding) and keeper questionnaires (rating). The behavioural observations indicated a number of stereotypic behaviours in sloth bears but not in brown bears. The uniformity of zone usage was calculated to investigate if the enclosure size and features were adequate for use, and a social aspect of otherwise solitary animals was also identified. The behavioural profiles generated through coding and rating were compared to determine the reliability between these two methods in Ursids. Profiles were not compared between individuals since this study is not a comparison between different personality types but rather an effort (one of the few ones existing in literature) to select a valid and reproducible methodology capable of assessing personality in bears. PMID:28505095

Preliminary Development of Real Time Usage-Phase Monitoring System for CNC Machine Tools with a Case Study on CNC Machine VMC 250

NASA Astrophysics Data System (ADS)

Budi Harja, Herman; Prakosa, Tri; Raharno, Sri; Yuwana Martawirya, Yatna; Nurhadi, Indra; Setyo Nogroho, Alamsyah

2018-03-01

The production characteristic of job-shop industry at which products have wide variety but small amounts causes every machine tool will be shared to conduct production process with dynamic load. Its dynamic condition operation directly affects machine tools component reliability. Hence, determination of maintenance schedule for every component should be calculated based on actual usage of machine tools component. This paper describes study on development of monitoring system to obtaining information about each CNC machine tool component usage in real time approached by component grouping based on its operation phase. A special device has been developed for monitoring machine tool component usage by utilizing usage phase activity data taken from certain electronics components within CNC machine. The components are adaptor, servo driver and spindle driver, as well as some additional components such as microcontroller and relays. The obtained data are utilized for detecting machine utilization phases such as power on state, machine ready state or spindle running state. Experimental result have shown that the developed CNC machine tool monitoring system is capable of obtaining phase information of machine tool usage as well as its duration and displays the information at the user interface application.

Valuation of Water and Emissions in Energy Systems

EPA Science Inventory

Price incentives and economic penalties (monetization) are common approaches to control water usage and total direct greenhouse gas emissions (externalities) of industrial systems. We argue that homogenous pricing of externalities provides limited flexibility for mitigating envir...

Electrical Resistivity Imaging

EPA Science Inventory

Electrical resistivity imaging (ERI) is a geophysical method originally developed within the mining industry where it has been used for decades to explore for and characterize subsurface mineral deposits. It is one of the oldest geophysical methods with the first documented usag...

A factual survey of automobile usage

DOT National Transportation Integrated Search

1941-01-01

In anticipation of the problems in civilian transportation that the : defense effort would bring to the motor vehicle user, to business and industry, and to Government, the Automobile Manufacturers Association in the fall of 1940 undertook a factual ...

Source identification and apportionment of halogenated compounds observed at a remote site in East Asia.

PubMed

Li, Shanlan; Kim, Jooil; Park, Sunyoung; Kim, Seung-Kyu; Park, Mi-Kyung; Mühle, Jens; Lee, Gangwoong; Lee, Meehye; Jo, Chun Ok; Kim, Kyung-Ryul

2014-01-01

The sources of halogenated compounds in East Asia associated with stratospheric ozone depletion and climate change are relatively poorly understood. High-precision in situ measurements of 18 halogenated compounds and carbonyl sulfide (COS) made at Gosan, Jeju Island, Korea, from November 2007 to December 2011 were analyzed by a positive matrix factorization (PMF). Seven major industrial sources were identified from the enhanced concentrations of halogenated compounds observed at Gosan and corresponding concentration-based source contributions were also suggested: primary aluminum production explaining 37% of total concentration enhancements, solvent usage of which source apportionment is 25%, fugitive emissions from HCFC/HFC production with 11%, refrigerant replacements (9%), semiconductor/electronics industry (9%), foam blowing agents (6%), and fumigation (3%). Statistical trajectory analysis was applied to specify the potential emission regions for seven sources using back trajectories. Primary aluminum production, solvent usage and fugitive emission sources were mainly contributed by China. Semiconductor/electronics sources were dominantly located in Korea. Refrigerant replacement, fumigation and foam blowing agent sources were spread throughout East Asian countries. The specified potential source regions are consistent with country-based consumptions and emission patterns, verifying the PMF analysis results. The industry-based emission sources of halogenated compounds identified in this study help improve our understanding of the East Asian countries' industrial contributions to halogenated compound emissions.

Battery Technologies for Mass Deployment of Electric Vehicles

DOT National Transportation Integrated Search

2018-03-23

Electric vehicle (EV) batteries have significantly improved since their inception. However, lifetime of these batteries is still strongly dependent on the usage profiles. This report describes aspects of EV battery utilization, and their impact on ba...

A Short Distance CW-Radar Sensor at 77 GHz in LTCC for Industrial Applications

NASA Astrophysics Data System (ADS)

Rusch, Christian; Klein, Tobias; Beer, Stefan; Zwick, Thomas

2013-12-01

The paper presents a Continuous-Wave(CW)-Radar sensor for high accuracy distance measurements in industrial applications. The usage of radar sensors in industrial scenarios has the advantage of a robust functionality in wet or dusty environments where optical systems reach their limits. This publication shows that accuracies of a few micro-meters are possible with millimeter-wave systems. In addition to distance measurement results the paper describes the sensor concept, the experimental set-up with the measurement process and possibilities to increase the accuracy even further.

Computer programs for generation and evaluation of near-optimum vertical flight profiles

NASA Technical Reports Server (NTRS)

Sorensen, J. A.; Waters, M. H.; Patmore, L. C.

1983-01-01

Two extensive computer programs were developed. The first, called OPTIM, generates a reference near-optimum vertical profile, and it contains control options so that the effects of various flight constraints on cost performance can be examined. The second, called TRAGEN, is used to simulate an aircraft flying along an optimum or any other vertical reference profile. TRAGEN is used to verify OPTIM's output, examine the effects of uncertainty in the values of parameters (such as prevailing wind) which govern the optimum profile, or compare the cost performance of profiles generated by different techniques. A general description of these programs, the efforts to add special features to them, and sample results of their usage are presented.

Assessment of risk due to the use of carbon fiber composites in commercial and general aviation

NASA Technical Reports Server (NTRS)

Fiksel, J.; Rosenfield, D.; Kalelkar, A.

1980-01-01

The development of a national risk profile for the total annual aircraft losses due to carbon fiber composite (CFC) usage through 1993 is discussed. The profile was developed using separate simulation methods for commercial and general aviation aircraft. A Monte Carlo method which was used to assess the risk in commercial aircraft is described. The method projects the potential usage of CFC through 1993, investigates the incidence of commercial aircraft fires, models the potential release and dispersion of carbon fibers from a fire, and estimates potential economic losses due to CFC damaging electronic equipment. The simulation model for the general aviation aircraft is described. The model emphasizes variations in facility locations and release conditions, estimates distribution of CFC released in general aviation aircraft accidents, and tabulates the failure probabilities and aggregate economic losses in the accidents.

Residential water usage: A case study of the major cities of the western region of Saudi Arabia

NASA Astrophysics Data System (ADS)

Abu Rizaiza, Omar S.

1991-05-01

Socioeconomic and climatological data of the major cities of the western region of Saudi Arabia have been used to develop several models to estimate the residential water usage for different kinds of houses. The developed models correlate the residential water usages with temperature, income, family size, price of water, and availability of a garden within the house. The study shows that the residential water uses in houses supplied by a public pipe network are 1.4-2 times greater than the residential water uses in houses supplied by tankers. It also shows that the price elasticities are very similar to those estimated in the United States. Income elasticities, on the other hand, are lower than those typically found in more industrialized countries.

GHGRP Natural Gas and Natural Gas Liquids Suppliers Sector Industrial Profile

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Natural Gas and Natural Gas Suppliers indust

American Contact Dermatitis Society Contact Allergy Management Program: An Epidemiologic Tool to Quantify Ingredient Usage.

PubMed

Scheman, Andrew; Severson, David

2016-01-01

The usage prevalence of ingredients in topical products is important to dermatologists and industry. To determine the prevalence of methylisothiazolinone (MI) in various types of consumer products The Contact Allergy Management Program (CAMP) database was mapped and sorted in spreadsheet format to determine the prevalence of MI in various types of consumer products. Methylisothiazolinone was found in 13.2% of 4660 total products in CAMP. High usage of MI was seen in dishwashing products (64%), shampoos (53%), bathroom/kitchen/all-purpose cleaners (47%), hair conditioners (45%), hair dyes (43%), laundry additives/fresheners/softeners (30%), soaps/cleansers (29%), and surface cleaners/disinfectants (27%). Of the products containing MI, MI alone (without methylchloroisothiazolinone) was most common in makeup products (100%), cleaning/dish/laundry products (>99%), moisturizers (82%), shaving products (78%), sunscreens (71%), and antiaging products (67%). The American Contact Dermatitis Society's CAMP is a valuable tool to collect epidemiologic data on the incidence of specific ingredient usage in various types of topical products.

A Hybrid Data Mining Approach for Credit Card Usage Behavior Analysis

NASA Astrophysics Data System (ADS)

Tsai, Chieh-Yuan

Credit card is one of the most popular e-payment approaches in current online e-commerce. To consolidate valuable customers, card issuers invest a lot of money to maintain good relationship with their customers. Although several efforts have been done in studying card usage motivation, few researches emphasize on credit card usage behavior analysis when time periods change from t to t+1. To address this issue, an integrated data mining approach is proposed in this paper. First, the customer profile and their transaction data at time period t are retrieved from databases. Second, a LabelSOM neural network groups customers into segments and identify critical characteristics for each group. Third, a fuzzy decision tree algorithm is used to construct usage behavior rules of interesting customer groups. Finally, these rules are used to analysis the behavior changes between time periods t and t+1. An implementation case using a practical credit card database provided by a commercial bank in Taiwan is illustrated to show the benefits of the proposed framework.

Profiles of Automotive Suppliers Industries--Engineered Mechanical Components and Systems : Volume II, Appendices.

DOT National Transportation Integrated Search

1981-09-01

The profile describes and analyzes that segment of the automotive supplier industry which provides engineered mechanical components/assemblies/systems to the prime auto manufacturers. It presents an overview of the role and structure of this industry...

A IHE-Like Approach Method for Quantitative Analysis of PACS Usage.

PubMed

Calabrese, Raffaele; Beltrame, Marco; Accardo, Agostino

2016-12-01

Today, many hospitals have a running enterprise picture archiving and communication system (PACS) and their administrators should have the tools to measure the system activity and, in particular, how much it is used. The information would be valuable for decision-makers to address asset management and the development of policies for its correct utilization and eventually start training initiatives to get the best in resource utilization and operators' satisfaction. On the economic side, a quantitative method to measure the usage of the workstations would be desirable to better redistribute existing resources and plan the purchase of new ones. The paper exploits in an unconventional way the potential of the IHE Audit Trail and Node Authentication (ATNA) profile: it uses the data generated in order to safeguard the security of patient data and to retrieve information about the workload of each PACS workstation. The method uses the traces recorded, according to the profile, for each access to image data and to calculate how much each station is used. The results, constituted by measures of the frequency of PACS station usage suitably classified and presented according to a convenient format for decision-makers, are encouraging. In the time of the spending review, the careful management of available resources is the top priority for a healthcare organization. Thanks to our work, a common medium such as the ATNA profile appears a very useful resource for purposes other than those for which it was born. This avoids additional investments in management tools and allows optimization of resources at no cost.

Development of industry-based strategies for motivating seat-belt usage

DOT National Transportation Integrated Search

1983-03-01

A variety of incentive-based programs to motivate safety belt use were tested during the 18-month grant period in order to define optimal incentive strategies for particular corporate settings. Initial programs provoked important research questions w...

PharmEcovigilance and the Environmental Footprint of Pharmaceuticals

EPA Science Inventory

The prescribing and usage of medications have ramifications extending far beyond conventional medical care. The healthcare industry has an environmental footprint because the active ingredients from pharmaceuticals enter the environment as pollutants by a variety of routes, prima...

The Role of PharmEcovigilance in Reducing the Environmental Footprint of Pharmaceuticals

EPA Science Inventory

The prescribing and usage of medications have ramifications extending far beyond conventional medical care. The pharmaceutical and healthcare industries have an environmental footprint because the active pharmaceutical ingredients (APIs) can enter the environment as contaminants ...

Phytochemistry, biological activities and potential of annatto in natural colorant production for industrial applications – A review

PubMed Central

Shahid-ul-Islam; Rather, Luqman J.; Mohammad, Faqeer

2015-01-01

Bixa orellana commonly known as annatto is one of the oldest known natural dye yielding plants native to Central and South America. Various parts of annatto have been widely used in the traditional medical system for prevention and treatment of a wide number of health disorders. The plethora of traditional uses has encouraged researchers to identify and isolate phytochemicals from all parts of this plant. Carotenoids, apocarotenoids, terpenes, terpenoids, sterols, and aliphatic compounds are main compounds found in all parts of this plant and are reported to exhibit a wide range of pharmacological activities. In recent years annatto has received tremendous scientific interest mainly due to the isolation of yellow–orange natural dye from its seeds which exhibits high biodegradability, low toxicity, and compatibility with the environment. Considerable research work has already been done and is currently underway for its applications in food, textile, leather, cosmetic, solar cells, and other industries. The present review provides up-to-date systematic and organized information on the traditional usage, phytochemistry and pharmacology of annatto. It also highlights its non-food industrial applications in order to bring more interest on this dye plant, identifies the existing gaps and provides potential for future studies. Studies reported in this review have demonstrated that annatto holds a great potential for being exploited as source of drugs and a potential natural dye. However, further efforts are required to identify extract biomolecules and their action mechanisms in exhibiting certain biological activities in order to understand the full phytochemical profile and the complex pharmacological effects of this plant. PMID:27222755

Long weekly working hours and ischaemic heart disease: a follow-up study among 145 861 randomly selected workers in Denmark

PubMed Central

Hannerz, Harald; Larsen, Ann Dyreborg; Garde, Anne Helene

2018-01-01

Objectives The aim of the present study was to test if incidences of ischaemic heart disease (IHD) and usage of antihypertensive drugs are independent of weekly working hours (WWH) among full-time employees in Denmark. Design and participants Data on WWH from participants of the Danish labour force surveys, 1999–2013, were linked on an individual level to national registers with data on socioeconomic status (SES), industry, emigrations, redeemed prescriptions, hospital contacts and deaths. Participants were followed until the end of 2014 (on average 7.7 years). Poisson regression was used to model incidence rates as a function of WWH. The analyses were controlled for calendar time, time passed since start of follow-up, employment in the healthcare industry, age, sex, SES and night work. Results In total, we found 3635 cases of IHD and 20 648 cases of antihypertensive drug usage. The rate ratio of IHD was 0.95 (95% CI 0.85 to 1.06) for 41–48 compared with 32–40 WWH and 1.07 (0.94 to 1.21) for >48 compared with 32–40 WWH. The corresponding rate ratios for antihypertensive drug usage were 0.99 (0.95 to 1.04) and 1.02 (0.97 to 1.08). No statistically significant interactions between WWH and sex, SES and night work, respectively, were found. Conclusion In this Danish sample, we did not find any statistically significant association between WWH and IHD or antihypertensive drug usage. PMID:29909368

A national profile of the U.S. hardwood sawmill industry

Treesearch

Scott Bowe; Robert Smith; Philip A. Araman

2001-01-01

A nationwide survey of the hardwood sawmill industry was conducted in the fall of 1999. The objectives of the survey were to generate a current demographic profile of the hardwood sawmill industry and identify the preferred information sources for the hardwood sawmill industry. These objectives were chosen because timely information was not available for the hardwood...

Industrial Maintenance. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for industrial maintenance occupations. The list contains units (with and without subunits), competencies, and competency…

Analysis of the Optimum Usage of Slag for the Compressive Strength of Concrete.

PubMed

Lee, Han-Seung; Wang, Xiao-Yong; Zhang, Li-Na; Koh, Kyung-Taek

2015-03-18

Ground granulated blast furnace slag is widely used as a mineral admixture to replace partial Portland cement in the concrete industry. As the amount of slag increases, the late-age compressive strength of concrete mixtures increases. However, after an optimum point, any further increase in slag does not improve the late-age compressive strength. This optimum replacement ratio of slag is a crucial factor for its efficient use in the concrete industry. This paper proposes a numerical procedure to analyze the optimum usage of slag for the compressive strength of concrete. This numerical procedure starts with a blended hydration model that simulates cement hydration, slag reaction, and interactions between cement hydration and slag reaction. The amount of calcium silicate hydrate (CSH) is calculated considering the contributions from cement hydration and slag reaction. Then, by using the CSH contents, the compressive strength of the slag-blended concrete is evaluated. Finally, based on the parameter analysis of the compressive strength development of concrete with different slag inclusions, the optimum usage of slag in concrete mixtures is determined to be approximately 40% of the total binder content. The proposed model is verified through experimental results of the compressive strength of slag-blended concrete with different water-to-binder ratios and different slag inclusions.

Analysis of the Optimum Usage of Slag for the Compressive Strength of Concrete

PubMed Central

Lee, Han-Seung; Wang, Xiao-Yong; Zhang, Li-Na; Koh, Kyung-Taek

2015-01-01

Ground granulated blast furnace slag is widely used as a mineral admixture to replace partial Portland cement in the concrete industry. As the amount of slag increases, the late-age compressive strength of concrete mixtures increases. However, after an optimum point, any further increase in slag does not improve the late-age compressive strength. This optimum replacement ratio of slag is a crucial factor for its efficient use in the concrete industry. This paper proposes a numerical procedure to analyze the optimum usage of slag for the compressive strength of concrete. This numerical procedure starts with a blended hydration model that simulates cement hydration, slag reaction, and interactions between cement hydration and slag reaction. The amount of calcium silicate hydrate (CSH) is calculated considering the contributions from cement hydration and slag reaction. Then, by using the CSH contents, the compressive strength of the slag-blended concrete is evaluated. Finally, based on the parameter analysis of the compressive strength development of concrete with different slag inclusions, the optimum usage of slag in concrete mixtures is determined to be approximately 40% of the total binder content. The proposed model is verified through experimental results of the compressive strength of slag-blended concrete with different water-to-binder ratios and different slag inclusions. PMID:28787998

Indicators for the Data Usage Index (DUI): an incentive for publishing primary biodiversity data through global information infrastructure.

PubMed

Ingwersen, Peter; Chavan, Vishwas

2011-01-01

A professional recognition mechanism is required to encourage expedited publishing of an adequate volume of 'fit-for-use' biodiversity data. As a component of such a recognition mechanism, we propose the development of the Data Usage Index (DUI) to demonstrate to data publishers that their efforts of creating biodiversity datasets have impact by being accessed and used by a wide spectrum of user communities. We propose and give examples of a range of 14 absolute and normalized biodiversity dataset usage indicators for the development of a DUI based on search events and dataset download instances. The DUI is proposed to include relative as well as species profile weighted comparative indicators. We believe that in addition to the recognition to the data publisher and all players involved in the data life cycle, a DUI will also provide much needed yet novel insight into how users use primary biodiversity data. A DUI consisting of a range of usage indicators obtained from the GBIF network and other relevant access points is within reach. The usage of biodiversity datasets leads to the development of a family of indicators in line with well known citation-based measurements of recognition.

Extractables analysis of single-use flexible plastic biocontainers.

PubMed

Marghitoiu, Liliana; Liu, Jian; Lee, Hans; Perez, Lourdes; Fujimori, Kiyoshi; Ronk, Michael; Hammond, Matthew R; Nunn, Heather; Lower, Asher; Rogers, Gary; Nashed-Samuel, Yasser

2015-01-01

Studies of the extractable profiles of bioprocessing components have become an integral part of drug development efforts to minimize possible compromise in process performance, decrease in drug product quality, and potential safety risk to patients due to the possibility of small molecules leaching out from the components. In this study, an effective extraction solvent system was developed to evaluate the organic extractable profiles of single-use bioprocess equipment, which has been gaining increasing popularity in the biopharmaceutical industry because of the many advantages over the traditional stainless steel-based bioreactors and other fluid mixing and storage vessels. The chosen extraction conditions were intended to represent aggressive conditions relative to the application of single-use bags in biopharmaceutical manufacture, in which aqueous based systems are largely utilized. Those extraction conditions, along with a non-targeted analytical strategy, allowed for the generation and identification of an array of extractable compounds; a total of 53 organic compounds were identified from four types of commercially available single-use bags, the majority of which are degradation products of polymer additives. The success of this overall extractables analysis strategy was reflected partially by the effectiveness in the extraction and identification of a compound that was later found to be highly detrimental to mammalian cell growth. The usage of single-use bioreactors has been increasing in biopharmaceutical industry because of the appealing advantages that it promises regarding to the cleaning, sterilization, operational flexibility, and so on, during manufacturing of biologics. However, compared to its conventional counterparts based mainly on stainless steel, single-use bioreactors are more susceptible to potential problems associated with compound leaching into the bioprocessing fluid. As a result, extractable profiling of the single-use system has become essential in the qualification of such systems for its use in drug manufacturing. The aim of this study is to evaluate the effectiveness of an extraction solvent system developed to study the extraction profile of single-use bioreactors in which aqueous-based systems are largely used. The results showed that with a non-targeted analytical approach, the extraction solvent allowed the generation and identification of an array of extractable compounds from four commercially available single-use bioreactors. Most of extractables are degradation products of polymer additives, among which was a compound that was later found to be highly detrimental to mammalian cell growth. © PDA, Inc. 2015.

A Review and Evaluation of the Langley Research Center's Scientific and Technical Information Program. Results of Phase IV--Knowledge and Attitudes Survey, Academic and Industrial Personnel. Final Report.

ERIC Educational Resources Information Center

Pinelli, Thomas E.; And Others

As Phase IV of a comprehensive evaluation of the NASA-affiliated Langley Research Center's (LaRC) scientific and technical information (STI) program, a study was conducted to assess the usage, importance, and perceived quality of Langley-generated STI among academic and industrial research personnel, and to determine ways in which that information…

Industrial & Manufacturing Engineering | Classification | College of

Science.gov Websites

Engineering(414)229-6597msahmed@uwm.eduEng & Math Sciences EMS W383 profile photo Dr. Onur AsanAdjunct Assistant ProfessorIndustrial & Manufacturing Engineeringoasan@mcw.eduEng & Math Sciences profile ChandlerAdjunct InstructorIndustrial & Manufacturing Engineeringchandlec@uwm.eduEng & Math Sciences

Agricultural/Industrial Mechanical Technician. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for agricultural/industrial mechanical technician occupations. The list contains units (with and without subunits),…

Forest Industry Worker. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for forest industry occupations. The list contains units (with and without subunits), competencies, and competency builders…

On eco-efficient technologies to minimize industrial water consumption

NASA Astrophysics Data System (ADS)

Amiri, Mohammad C.; Mohammadifard, Hossein; Ghaffari, Ghasem

2016-07-01

Purpose - Water scarcity will further stress on available water systems and decrease the security of water in many areas. Therefore, innovative methods to minimize industrial water usage and waste production are of paramount importance in the process of extending fresh water resources and happen to be the main life support systems in many arid regions of the world. This paper demonstrates that there are good opportunities for many industries to save water and decrease waste water in softening process by substituting traditional with echo-friendly methods. The patented puffing method is an eco-efficient and viable technology for water saving and waste reduction in lime softening process. Design/methodology/approach - Lime softening process (LSP) is a very sensitive process to chemical reactions. In addition, optimal monitoring not only results in minimizing sludge that must be disposed of but also it reduces the operating costs of water conditioning. Weakness of the current (regular) control of LSP based on chemical analysis has been demonstrated experimentally and compared with the eco-efficient puffing method. Findings - This paper demonstrates that there is a good opportunity for many industries to save water and decrease waste water in softening process by substituting traditional method with puffing method, a patented eco-efficient technology. Originality/value - Details of the required innovative works to minimize industrial water usage and waste production are outlined in this paper. Employing the novel puffing method for monitoring of lime softening process results in saving a considerable amount of water while reducing chemical sludge.

Presidential Green Chemistry Challenge: 2015 Specific Environmental Benefit: Climate Change Award

EPA Pesticide Factsheets

Presidential Green Chemistry Challenge 2015 award winner, Algenol, blue-green algae to produce ethanol and other fuels, uses CO2 from air or industrial emitters, reduces the carbon footprint, costs and water usage, no reliance on food crops

The Afterlife of Drugs and the Role of PharmEcovigilance

EPA Science Inventory

The prescribing and usage of medications have ramifications extending far beyond conventional medical care. The healthcare industry has an environmental footprint because the active ingredients from pharmaceuticals enter the environment as pollutants by a variety of routes, prima...

Longitudinal metagenomic profiling of bovine milk to assess the impact of intramammary treatment using a third-generation cephalosporin

PubMed Central

Ganda, Erika K.; Bisinotto, Rafael S.; Lima, Svetlana F.; Kronauer, Kristina; Decter, Dean H.; Oikonomou, Georgios; Schukken, Ynte H.; Bicalho, Rodrigo C.

2016-01-01

Antimicrobial usage in food animals has a direct impact on human health, and approximately 80% of the antibiotics prescribed in the dairy industry are used to treat bovine mastitis. Here we provide a longitudinal description of the changes in the microbiome of milk that are associated with mastitis and antimicrobial therapy. Next-generation sequencing, 16 S rRNA gene quantitative real-time PCR, and aerobic culturing were applied to assess the effect of disease and antibiotic therapy on the milk microbiome. Cows diagnosed with clinical mastitis associated with Gram-negative pathogens or negative aerobic culture were randomly allocated into 5 days of Ceftiofur intramammary treatment or remained as untreated controls. Serial milk samples were collected from the affected quarter and the ipsilateral healthy quarter of the same animal. Milk from the mastitic quarter had a higher bacterial load and reduced microbial diversity compared to healthy milk. Resolution of the disease was accompanied by increases in diversity indexes and a decrease in pathogen relative abundance. Escherichia coli-associated mastitic milk samples had a remarkably distinct bacterial profile, dominated by Enterobacteriaceae, when compared to healthy milk. However, no differences were observed in culture-negative mastitis samples when compared to healthy milk. Antimicrobial treatment had no significant effect on clinical cure, bacteriological cure, pathogen clearance rate or bacterial load. PMID:27874095

Screen media usage, sleep time and academic performance in adolescents: clustering a self-organizing maps analysis.

PubMed

Peiró-Velert, Carmen; Valencia-Peris, Alexandra; González, Luis M; García-Massó, Xavier; Serra-Añó, Pilar; Devís-Devís, José

2014-01-01

Screen media usage, sleep time and socio-demographic features are related to adolescents' academic performance, but interrelations are little explored. This paper describes these interrelations and behavioral profiles clustered in low and high academic performance. A nationally representative sample of 3,095 Spanish adolescents, aged 12 to 18, was surveyed on 15 variables linked to the purpose of the study. A Self-Organizing Maps analysis established non-linear interrelationships among these variables and identified behavior patterns in subsequent cluster analyses. Topological interrelationships established from the 15 emerging maps indicated that boys used more passive videogames and computers for playing than girls, who tended to use mobile phones to communicate with others. Adolescents with the highest academic performance were the youngest. They slept more and spent less time using sedentary screen media when compared to those with the lowest performance, and they also showed topological relationships with higher socioeconomic status adolescents. Cluster 1 grouped boys who spent more than 5.5 hours daily using sedentary screen media. Their academic performance was low and they slept an average of 8 hours daily. Cluster 2 gathered girls with an excellent academic performance, who slept nearly 9 hours per day, and devoted less time daily to sedentary screen media. Academic performance was directly related to sleep time and socioeconomic status, but inversely related to overall sedentary screen media usage. Profiles from the two clusters were strongly differentiated by gender, age, sedentary screen media usage, sleep time and academic achievement. Girls with the highest academic results had a medium socioeconomic status in Cluster 2. Findings may contribute to establishing recommendations about the timing and duration of screen media usage in adolescents and appropriate sleep time needed to successfully meet the demands of school academics and to improve interventions targeting to affect behavioral change.

Screen Media Usage, Sleep Time and Academic Performance in Adolescents: Clustering a Self-Organizing Maps Analysis

PubMed Central

Peiró-Velert, Carmen; Valencia-Peris, Alexandra; González, Luis M.; García-Massó, Xavier; Serra-Añó, Pilar; Devís-Devís, José

2014-01-01

Screen media usage, sleep time and socio-demographic features are related to adolescents' academic performance, but interrelations are little explored. This paper describes these interrelations and behavioral profiles clustered in low and high academic performance. A nationally representative sample of 3,095 Spanish adolescents, aged 12 to 18, was surveyed on 15 variables linked to the purpose of the study. A Self-Organizing Maps analysis established non-linear interrelationships among these variables and identified behavior patterns in subsequent cluster analyses. Topological interrelationships established from the 15 emerging maps indicated that boys used more passive videogames and computers for playing than girls, who tended to use mobile phones to communicate with others. Adolescents with the highest academic performance were the youngest. They slept more and spent less time using sedentary screen media when compared to those with the lowest performance, and they also showed topological relationships with higher socioeconomic status adolescents. Cluster 1 grouped boys who spent more than 5.5 hours daily using sedentary screen media. Their academic performance was low and they slept an average of 8 hours daily. Cluster 2 gathered girls with an excellent academic performance, who slept nearly 9 hours per day, and devoted less time daily to sedentary screen media. Academic performance was directly related to sleep time and socioeconomic status, but inversely related to overall sedentary screen media usage. Profiles from the two clusters were strongly differentiated by gender, age, sedentary screen media usage, sleep time and academic achievement. Girls with the highest academic results had a medium socioeconomic status in Cluster 2. Findings may contribute to establishing recommendations about the timing and duration of screen media usage in adolescents and appropriate sleep time needed to successfully meet the demands of school academics and to improve interventions targeting to affect behavioral change. PMID:24941009

Alkaloids of the South African Amaryllidaceae: a review.

PubMed

Nair, Jerald J; Bastida, Jaume; Codina, Caries; Viladomat, Francesc; van Staden, Johannes

2013-09-01

The plant family Amaryllidaceae is known for its horticultural and ornamental appeal as well as its medicinal value. In relation to these characteristics, trade in Amaryllid flower varieties (especially daffodils) is a multi-million dollar revenue generator for the floriculture industry. Of greater significance are the medicinal attributes of the family, which has already spawned the Alzheimer's prescription drug galanthamine, a potent and selective inhibitor of the enzyme acetylcholinesterase, of significance in the progression of neurodegeneration associated with motor neuron diseases, with annual global sales of around $150 million. Furthermore, it is anticipated that an anticancer drug target related to the Amaryllidaceae alkaloid pancratistatin, presently under advanced clinical evaluation, will enter commercial circulation within the next decade. Members of the Amaryllidaceae are distributed through both tropical and subtropical regions of the globe, but are of prominence within three distinct geographical locations, including Andean South America, the Mediterranean basin, and southern Africa. The southern African zone is known to harbor at least a third of the worldwide complement of around 1000 species, many of which are widely utilized in the traditional medicinal practices of the indigenous people of the region. Given its therapeutic and economic value, its natural abundance in the southern African region, coupled to its widespread usage in ethnic medicine, the family Amaryllidaceae provides a diverse and accessible platform for phytochemical based drug discovery. A consolidation of its traditional usage as well as its chemical and pharmacological profiles will thus guide efforts aimed at maximizing this potential. In undertaking this survey of the Amaryllidaceae of southern African, we aimed to achieve these goals.

Online Social Networking and Addiction—A Review of the Psychological Literature

PubMed Central

Kuss, Daria J.; Griffiths, Mark D.

2011-01-01

Social Networking Sites (SNSs) are virtual communities where users can create individual public profiles, interact with real-life friends, and meet other people based on shared interests. They are seen as a ‘global consumer phenomenon’ with an exponential rise in usage within the last few years. Anecdotal case study evidence suggests that ‘addiction’ to social networks on the Internet may be a potential mental health problem for some users. However, the contemporary scientific literature addressing the addictive qualities of social networks on the Internet is scarce. Therefore, this literature review is intended to provide empirical and conceptual insight into the emerging phenomenon of addiction to SNSs by: (1) outlining SNS usage patterns, (2) examining motivations for SNS usage, (3) examining personalities of SNS users, (4) examining negative consequences of SNS usage, (5) exploring potential SNS addiction, and (6) exploring SNS addiction specificity and comorbidity. The findings indicate that SNSs are predominantly used for social purposes, mostly related to the maintenance of established offline networks. Moreover, extraverts appear to use social networking sites for social enhancement, whereas introverts use it for social compensation, each of which appears to be related to greater usage, as does low conscientiousness and high narcissism. Negative correlates of SNS usage include the decrease in real life social community participation and academic achievement, as well as relationship problems, each of which may be indicative of potential addiction. PMID:22016701

Online social networking and addiction--a review of the psychological literature.

PubMed

Kuss, Daria J; Griffiths, Mark D

2011-09-01

Social Networking Sites (SNSs) are virtual communities where users can create individual public profiles, interact with real-life friends, and meet other people based on shared interests. They are seen as a 'global consumer phenomenon' with an exponential rise in usage within the last few years. Anecdotal case study evidence suggests that 'addiction' to social networks on the Internet may be a potential mental health problem for some users. However, the contemporary scientific literature addressing the addictive qualities of social networks on the Internet is scarce. Therefore, this literature review is intended to provide empirical and conceptual insight into the emerging phenomenon of addiction to SNSs by: (1) outlining SNS usage patterns, (2) examining motivations for SNS usage, (3) examining personalities of SNS users, (4) examining negative consequences of SNS usage, (5) exploring potential SNS addiction, and (6) exploring SNS addiction specificity and comorbidity. The findings indicate that SNSs are predominantly used for social purposes, mostly related to the maintenance of established offline networks. Moreover, extraverts appear to use social networking sites for social enhancement, whereas introverts use it for social compensation, each of which appears to be related to greater usage, as does low conscientiousness and high narcissism. Negative correlates of SNS usage include the decrease in real life social community participation and academic achievement, as well as relationship problems, each of which may be indicative of potential addiction.

Mobile Phone Usage and its Health Effects Among Adults in a Semi-Urban Area of Southern India.

PubMed

Stalin, P; Abraham, Sherin Billy; Kanimozhy, K; Prasad, R Vishnu; Singh, Zile; Purty, Anil J

2016-01-01

Worldwide, mobile phone usage has been increased dramatically which could affect the health of the people. India has the second largest number of mobile phone users. However there are only few studies conducted in India to assess its effects on health. To determine the prevalence and pattern of mobile phone usage and to assess the relationship between certain selected health problems and mobile phone usage among adults. Community-based cross-sectional study was conducted in Kottakuppam, a town panchayat in Villupuram district of Coastal Tamil Nadu, Southern India. It is a semi-urban area with a population of about 16,000. Majority of the residents are Muslim by religion and belong to different socio economic status. The study was approved by the Institutional Ethics Committee. A total of 2121 study participants were interviewed by the pre-final medical students through house-to-house survey using a pretested structured questionnaire. The questionnaire included the variables such as socio demographic profile, mobile phone usage and pattern, selected health problems, perceived benefits and threats and blood pressure. Selected health problems included headache, earache, neck pain, tinnitus, painful fingers, restlessness, morning tiredness, tingling fingers, fatigue, eye symptoms, sleep disturbance and hypertension. Only 2054 were included for data analysis using SPSS 17 version. Proportions were calculated. Chi-square test was used to measure the p-value. The p-value < 0.05 was considered as statistically significant. The prevalence of mobile phone usage was 70%. Calling facility (94.2%) was used more than the SMS (67.6%). Health problems like headache, earache, tinnitus, painful fingers and restlessness etc., were found to be positively associated with mobile phone usage. There was negative association between hypertension and mobile phone usage. The prevalence of mobile phone usage was high. There was significant association between selected health problems and mobile phone usage. In future, higher studies are required to confirm our findings.

Natural Resources. Ohio's Competency Analysis Profile. Forest Industry Worker. Resource Conservation.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This competency analysis profile lists 155 competencies that have been identified by employers as core competencies for inclusion in programs to train forest industry and resource conservation workers. The core competencies are organized into 10 units dealing the following: general safety precautions, natural resource industry operations, soil…

Using OES Occupation Profiles in a Job Search

ERIC Educational Resources Information Center

Cunningham, Chris

2013-01-01

Using occupation profiles, jobseekers can see which industries employ the most workers in a particular field, which geographical areas have high concentrations of those jobs, and how wages differ by industry and geographical area. This article gives an overview of the data in the Occupational Employment Statistics (OES) occupation profiles. It…

Study on Web-Based Tool for Regional Agriculture Industry Structure Optimization Using Ajax

NASA Astrophysics Data System (ADS)

Huang, Xiaodong; Zhu, Yeping

According to the research status of regional agriculture industry structure adjustment information system and the current development of information technology, this paper takes web-based regional agriculture industry structure optimization tool as research target. This paper introduces Ajax technology and related application frameworks to build an auxiliary toolkit of decision support system for agricultural policy maker and economy researcher. The toolkit includes a “one page” style component of regional agriculture industry structure optimization which provides agile arguments setting method that enables applying sensitivity analysis and usage of data and comparative advantage analysis result, and a component that can solve the linear programming model and its dual problem by simplex method.

A Year in the Life of the NASA Electronic Parts and Packaging (NEPP) Program

NASA Technical Reports Server (NTRS)

Label, Kenneth A.

2017-01-01

NEPP Mission Statement: Provide NASAs leadership for developing and maintaining guidance for the screening, qualification, test, and reliable usage of electrical, electronic, and electromechanical (EEE) parts by NASA, in collaboration with other government Agencies and industry.

Custodial Training Makes Sense and Saves Dollars.

ERIC Educational Resources Information Center

Petersen, David

2002-01-01

Explains that due to the complexity of today's custodial work, extensive education and training is required. This includes basic commercial/industrial cleaning techniques; hygiene procedures; asbestos awareness; management, scheduling, and budgeting; chemical usage; and calculating operations efficiency. Details the in-depth custodial training of…

Electric vehicle battery durability and reliability under electric utility grid operations.

DOT National Transportation Integrated Search

2017-05-01

Battery degradation is extremely important to EV technologies and is a function of several : factors, such as electrode chemistries, operating temperatures, and usage profiles (i.e. vehicle only : vs. vehicle-to-grid (V2G) applications). The goal of ...

Tobacco use, occupation, coffee, various nutrients, and bladder cancer.

PubMed

Howe, G R; Burch, J D; Miller, A B; Cook, G M; Esteve, J; Morrison, B; Gordon, P; Chambers, L W; Fodor, G; Winsor, G M

1980-04-01

In a Canadian population-based case-control study of 480 males and 152 female case-control pairs, the relative risk for development of bladder cancer for ever used versus never used cigarettes was 3.9 for males and 2.4 for females, with a dose-response relationship in both sexes. A reduced risk was associated with the use of filter cigarettes compared to nonfilter cigarettes. After control for cigarette usage, a significant risk was noted for male pipe smokers. For male ex-smokers the risk after 15 years of no smoking was less than one-half that of current male smokers. Bladder cancer risk was found for workers in the chemical, rubber, photographic, petroleum, medical, and food processing industries among males and for workers occupationally exposed to dust or fumes among both sexes. Bladder cancer risk was elevated for males consuming all types of coffee, regular coffee, and instant coffee and for females consuming instant coffee, but no dose-response relationship was found. Risk was found for males consuming water from nonpublic supples but not for females. No risk was observed in males or females consuming nitrate-containing foods, beverages other than coffee, or fiddlehead greens. Hair dye usage in females and phenacetin usage in males and females carried no risk. Divergent findings by area for aspirin suggested that an overall association was not causal. Reevaluation of the data on artificial sweeteners confirmed a significant bladder cancer risk in males and a dose-response relationship. The cumulated population attributable risk for bladder cancer was 90% for males from cigarette smoking, industrial exposure, and exposure to nonpublic water supplies and 29% for females from cigarette smoking, industrial exposure, and instant coffee consumption.

Time-Temperature Profiling of United Kingdom Consumers' Domestic Refrigerators.

PubMed

Evans, Ellen W; Redmond, Elizabeth C

2016-12-01

Increased consumer demand for convenience and ready-to-eat food, along with changes to consumer food purchase and storage practices, have resulted in an increased reliance on refrigeration to maximize food safety. Previous research suggests that many domestic refrigerators operate at temperatures exceeding recommendations; however, the results of several studies were determined by means of one temperature data point, which, given temperature fluctuation, may not be a true indicator of actual continual operating temperatures. Data detailing actual operating temperatures and the effects of consumer practices on temperatures are limited. This study has collated the time-temperature profiles of domestic refrigerators in consumer kitchens (n = 43) over 6.5 days with concurrent self-reported refrigerator usage. Overall, the findings established a significant difference (P < 0.05) between one-off temperature (the recording of one temperature data point) and mean operating temperature. No refrigerator operated at ≤5.0°C for the entire duration of the study. Mean temperatures exceeding 5.0°C were recorded in the majority (91%) of refrigerators. No significant associations or differences were determined for temperature profiles and demographics, including household size, or refrigerator characteristics (age, type, loading, and location). A positive correlation (P < 0.05) between room temperature and refrigerator temperature was determined. Reported door opening frequency correlated with temperature fluctuation (P < 0.05). Thermometer usage was determined to be infrequent. Cumulatively, research findings have established that the majority of domestic refrigerators in consumer homes operate at potentially unsafe temperatures and that this is influenced by consumer usage. The findings from this study may be utilized to inform the development of shelf-life testing based on realistic domestic storage conditions. Furthermore, the data can inform the development of future educational interventions to increase safe domestic refrigeration practices.

Upward revision of global fossil fuel methane emissions based on isotope database.

PubMed

Schwietzke, Stefan; Sherwood, Owen A; Bruhwiler, Lori M P; Miller, John B; Etiope, Giuseppe; Dlugokencky, Edward J; Michel, Sylvia Englund; Arling, Victoria A; Vaughn, Bruce H; White, James W C; Tans, Pieter P

2016-10-06

Methane has the second-largest global radiative forcing impact of anthropogenic greenhouse gases after carbon dioxide, but our understanding of the global atmospheric methane budget is incomplete. The global fossil fuel industry (production and usage of natural gas, oil and coal) is thought to contribute 15 to 22 per cent of methane emissions to the total atmospheric methane budget. However, questions remain regarding methane emission trends as a result of fossil fuel industrial activity and the contribution to total methane emissions of sources from the fossil fuel industry and from natural geological seepage, which are often co-located. Here we re-evaluate the global methane budget and the contribution of the fossil fuel industry to methane emissions based on long-term global methane and methane carbon isotope records. We compile the largest isotopic methane source signature database so far, including fossil fuel, microbial and biomass-burning methane emission sources. We find that total fossil fuel methane emissions (fossil fuel industry plus natural geological seepage) are not increasing over time, but are 60 to 110 per cent greater than current estimates owing to large revisions in isotope source signatures. We show that this is consistent with the observed global latitudinal methane gradient. After accounting for natural geological methane seepage, we find that methane emissions from natural gas, oil and coal production and their usage are 20 to 60 per cent greater than inventories. Our findings imply a greater potential for the fossil fuel industry to mitigate anthropogenic climate forcing, but we also find that methane emissions from natural gas as a fraction of production have declined from approximately 8 per cent to approximately 2 per cent over the past three decades.

Cure Cycle Design Methodology for Fabricating Reactive Resin Matrix Fiber Reinforced Composites: A Protocol for Producing Void-free Quality Laminates

NASA Technical Reports Server (NTRS)

Hou, Tan-Hung

2014-01-01

For the fabrication of resin matrix fiber reinforced composite laminates, a workable cure cycle (i.e., temperature and pressure profiles as a function of processing time) is needed and is critical for achieving void-free laminate consolidation. Design of such a cure cycle is not trivial, especially when dealing with reactive matrix resins. An empirical "trial and error" approach has been used as common practice in the composite industry. Such an approach is not only costly, but also ineffective at establishing the optimal processing conditions for a specific resin/fiber composite system. In this report, a rational "processing science" based approach is established, and a universal cure cycle design protocol is proposed. Following this protocol, a workable and optimal cure cycle can be readily and rationally designed for most reactive resin systems in a cost effective way. This design protocol has been validated through experimental studies of several reactive polyimide composites for a wide spectrum of usage that has been documented in the previous publications.

Chemical constituents: water-soluble vitamins, free amino acids and sugar profile from Ganoderma adspersum.

PubMed

Kıvrak, İbrahim

2015-01-01

Ganoderma adspersum presents a rigid fruiting body owing to chitin content and having a small quantity of water or moisture. The utility of bioactive constituent of the mushroom can only be available by extraction for human usage. In this study, carbohydrate, water-soluble vitamin compositions and amino acid contents were determined in G. adspersum mushroom. The composition in individual sugars was determined by HPLC-RID, mannitol (13.04 g/100 g) and trehalose (10.27 g/100 g) being the most abundant sugars. The examination of water-soluble vitamins and free amino acid composition was determined by UPLC-ESI-MS/MS. Essential amino acid constituted 67.79% of total amino acid, which is well worth the attention with regard to researchers and consumers. In addition, G. adspersum, which is also significantly rich in B group vitamins and vitamin C, can provide a wide range of notable applications in the pharmaceutics, cosmetics, food and dietary supplement industries. G. adspersum revealed its value for pharmacy and nutrition fields.

NASA Electronic Parts and Packaging (NEPP) - A NASA Office of Safety and Mission Assurance (OSMA) Program

NASA Technical Reports Server (NTRS)

Label, Kenneth A.

2017-01-01

NEPP Mission Statement: Provide NASA's leadership for developing and maintaining guidance for the screening, qualification, test, and reliable usage of electrical, electronic, and electromechanical (EEE) parts by NASA, in collaboration with other government Agencies and industry.

Characterizing Metal-Based Nanoparticles in Surface Water by Single-Particle ICPMS

EPA Science Inventory

Engineered metal-based nanomaterials are being used in increasing quantities in consumer and industrial products. These materials may be introduced into surface waters by a variety of paths depending on usage, and will be superimposed on concentrations of other particles containi...

Mastitis treatment-Reduction in antibiotic usage in dairy cows.

PubMed

Krömker, V; Leimbach, S

2017-08-01

Animal-friendly, economical, resource-saving milk production provides the basis for sustained consumer acceptance. Bovine mastitis plays a decisive role in the dairy industry-disturbing animal health and welfare and causing considerable economic losses on the other hand. Currently, antimicrobial treatment is indispensable to keep bovine udder health, animal welfare and economic aspects in balance. On the contrary, emergence and spread of antimicrobial resistance (AMR) is an urgent matter of particular public interest, and as a consequence, antimicrobial usage (AMU) in production livestock is a critically discussed subject. In urgent need of future reduction in AMU in the dairy industry, this review article describes and discusses possible approaches promising prompt implementation, including therapeutical alternatives as well as pro- and metaphylactic concepts such as the implementation of evidence-based mastitis therapy concepts and selective dry cow treatment (sDCT), in search of the most effective and contemporary methods for decreasing AMU and AMR in dairy production. © 2017 Blackwell Verlag GmbH.

Continuous whole-system monitoring toward rapid understanding of production HPC applications and systems

DOE PAGES

Agelastos, Anthony; Allan, Benjamin; Brandt, Jim; ...

2016-05-18

A detailed understanding of HPC applications’ resource needs and their complex interactions with each other and HPC platform resources are critical to achieving scalability and performance. Such understanding has been difficult to achieve because typical application profiling tools do not capture the behaviors of codes under the potentially wide spectrum of actual production conditions and because typical monitoring tools do not capture system resource usage information with high enough fidelity to gain sufficient insight into application performance and demands. In this paper we present both system and application profiling results based on data obtained through synchronized system wide monitoring onmore » a production HPC cluster at Sandia National Laboratories (SNL). We demonstrate analytic and visualization techniques that we are using to characterize application and system resource usage under production conditions for better understanding of application resource needs. Furthermore, our goals are to improve application performance (through understanding application-to-resource mapping and system throughput) and to ensure that future system capabilities match their intended workloads.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agelastos, Anthony; Allan, Benjamin; Brandt, Jim

A detailed understanding of HPC applications’ resource needs and their complex interactions with each other and HPC platform resources are critical to achieving scalability and performance. Such understanding has been difficult to achieve because typical application profiling tools do not capture the behaviors of codes under the potentially wide spectrum of actual production conditions and because typical monitoring tools do not capture system resource usage information with high enough fidelity to gain sufficient insight into application performance and demands. In this paper we present both system and application profiling results based on data obtained through synchronized system wide monitoring onmore » a production HPC cluster at Sandia National Laboratories (SNL). We demonstrate analytic and visualization techniques that we are using to characterize application and system resource usage under production conditions for better understanding of application resource needs. Furthermore, our goals are to improve application performance (through understanding application-to-resource mapping and system throughput) and to ensure that future system capabilities match their intended workloads.« less

Development and Early Usage Patterns of a Consumer-Facing Family Health History Tool

PubMed Central

Hulse, Nathan C.; Ranade-Kharkar, Pallavi; Post, Herman; Wood, Grant M.; Williams, Marc S.; Haug, Peter J.

2011-01-01

Personalized medicine will require detailed clinical patient profiles, and a particular focus on capturing data that is useful in forecasting risk. A detailed family health history is considered a critical component of these profiles, insomuch that it has been coined as ‘the best genetic test available’. Despite this, tools aimed at capturing this information for use in electronic health records have been characterized as inadequate. In this manuscript we detail the creation of a patient-facing family health history tool known as OurFamilyHealth, whose long-term emphasis is to facilitate risk assessment and clinical decision support. We present the rationale for such a tool, describe its development and release as a component of Intermountain Healthcare’s patient portal, and detail early usage statistics surrounding the application. Data derived from the tool since its release are also compared against family history charting patterns in Intermountain’s electronic health records, revealing differences in data availability. PMID:22195113

Indicators for the Data Usage Index (DUI): an incentive for publishing primary biodiversity data through global information infrastructure

PubMed Central

2011-01-01

Background A professional recognition mechanism is required to encourage expedited publishing of an adequate volume of 'fit-for-use' biodiversity data. As a component of such a recognition mechanism, we propose the development of the Data Usage Index (DUI) to demonstrate to data publishers that their efforts of creating biodiversity datasets have impact by being accessed and used by a wide spectrum of user communities. Discussion We propose and give examples of a range of 14 absolute and normalized biodiversity dataset usage indicators for the development of a DUI based on search events and dataset download instances. The DUI is proposed to include relative as well as species profile weighted comparative indicators. Conclusions We believe that in addition to the recognition to the data publisher and all players involved in the data life cycle, a DUI will also provide much needed yet novel insight into how users use primary biodiversity data. A DUI consisting of a range of usage indicators obtained from the GBIF network and other relevant access points is within reach. The usage of biodiversity datasets leads to the development of a family of indicators in line with well known citation-based measurements of recognition. PMID:22373200

Investigation and identification of factors affecting migrating peasant workers' usage of safety footwear in the Chinese construction industry.

PubMed

Suo, Qinghui; Zhang, Daming

2017-09-01

A sample of 300 migrating peasant workers from 15 Chinese building construction sites completed a demographic questionnaire to investigate the usage of safety footwear. The survey form was constructed based on the theory of planned behaviour, and a total of 12 questions focusing on the workers' past experience, attitudes, subjective norms and perceived behavioural control were included in the survey. It was found that 92% of the participants did not wear safety footwear while working on construction sites, although more than 91% of them believed that safety footwear would protect the foot from injury; none of the participants had been provided free safety footwear by their employer. Regression analysis shows that employers' attitude is the most important factor affecting their usage of safety footwear, 'providing free safety footwear' and 'comfortability of the safety footwear' ranking second and third respectively.

Thermal storage system flops at Illinois State office building

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ponczak, G.

1986-02-03

A thermal storage and electric resistive heating system in the new State of Illinois building in Chicago has used about 65% more electricity in its first year of operation than building designers originally predicted, according to state government sources. The state proposes to spend about $2 million to fine tune the system this year. Total first year electricity usage for the all-electric, 1.15 million square foot building was expected to be 18.7 million kilowatt hours (kWh). But according to recent energy bills, actual usage for the first year of operation, ending in December, was 31 million kWh, a usage overrunmore » that has cost the state of Illinois an extra $500,000. Some industry sources blame the thermal storage system and the electric heat system, which were untried when proposed in 1980, for much of the overrun, while others blame the building design.« less

Predicting Baseline for Analysis of Electricity Pricing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, T.; Lee, D.; Choi, J.

2016-05-03

To understand the impact of new pricing structure on residential electricity demands, we need a baseline model that captures every factor other than the new price. The standard baseline is a randomized control group, however, a good control group is hard to design. This motivates us to devlop data-driven approaches. We explored many techniques and designed a strategy, named LTAP, that could predict the hourly usage years ahead. The key challenge in this process is that the daily cycle of electricity demand peaks a few hours after the temperature reaching its peak. Existing methods rely on the lagged variables ofmore » recent past usages to enforce this daily cycle. These methods have trouble making predictions years ahead. LTAP avoids this trouble by assuming the daily usage profile is determined by temperature and other factors. In a comparison against a well-designed control group, LTAP is found to produce accurate predictions.« less

Determination of Phenols and Trimethylamine in Industrial Effluents

NASA Technical Reports Server (NTRS)

Levaggi, D. A.; Feldstein, M.

1971-01-01

For regulatory purposes to control certain odorous compounds the analysis of phenols and trimethylamines in industrial effluents is necessary. The Bay Area Air Pollution Control District laboratory has been determining these gases by gas chromatographic techniques. The procedures for sample collection, preparation for analysis and determination are described in detail. Typical data from various sources showing the effect of proposed regulations is shown. Extensive sampling and usage of these procedures has shown them to be accurate, reliable and suitable to all types of source effluents.

Description, accessibility and usage of SOIR/Venus Express atmospheric profiles of Venus distributed in VESPA (Virtual European Solar and Planetary Access)

NASA Astrophysics Data System (ADS)

Trompet, L.; Geunes, Y.; Ooms, T.; Mahieux, A.; Wilquet, V.; Chamberlain, S.; Robert, S.; Thomas, I. R.; Erard, S.; Cecconi, B.; Le Sidaner, P.; Vandaele, A. C.

2018-01-01

Venus Express SOIR profiles of pressure, temperature and number densities of different constituents of the mesosphere and lower thermosphere of Venus are the only experimental data covering the 60 km to 220 km range of altitudes at the terminator of Venus. This unique dataset is now available in the open access VESPA infrastructure. This paper describes the content of these data products and provides some use cases.

Energy study of rail passenger transportation. Volume 4. Efficiency improvements and industry future. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, C.; Wilhelm, J.P.

1979-08-01

Measures that offer promise of efficiency improvements or economy in energy usage in rail passenger transportation are identified and described; the future of rail passenger transportation in the US is discussed; and possible future roles of Federal agencies are discussed.

What models can teach us about watershed-nearshore relationships that observational studies cannot

EPA Science Inventory

The nearshore waters of the Laurentian Great Lakes are a valuable resource for drinking water, recreation, fishing, wildlife and industrial usage. However, environmental concerns such as eutrophication and the colonization of invasive species have resulted in the call for an over...

Modern School Shop Planning. Fifth Edition.

ERIC Educational Resources Information Center

1967

Facility planning and the integration of industrial education with total school programs are discussed with regard to safety, health, budgeting, and the effects of environment upon learning and teaching. Standards for equipment selection, purchasing, and usage are given, along with equipment and supplier lists. Facility guidelines and requirements…

Annual asphalt pavement industry survey on recycled materials and warm-mix asphalt usage : 2009-2012.

DOT National Transportation Integrated Search

2013-12-01

One of the shared goals of the Federal Highway Administration (FHWA) and the National Asphalt Pavement Association : (NAPA) is to support and promote sustainable practices such as pavement recycling and warm-mix asphalt (WMA). The use of : recycled m...

SIMULTANEOUS WATER CONSERVATION/RECYCLING/REUSE AND WASTE REDUCTION IN SEMICONDUCTOR MANUFACTURING

EPA Science Inventory

The project was devoted to two separate arms of research.  The overall goals of this research was to reduce the water use in the semi-conductor industry through a comprehensive program to reduce water usage in manufacturing processes, to investigate opportunitie...

76 FR 70110 - Proposed Information Collection; Comment Request; Miscellaneous Short Supply Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

... Request; Miscellaneous Short Supply Activities AGENCY: Bureau of Industry and Security, Commerce. ACTION... of two rarely used short supply activities: ``Registration of U.S. Agricultural Commodities for Exemption from Short Supply Limitations on Export'' (USAG), and ``Petitions for the Imposition of Monitoring...

Energy Efficient Storage and Transfer of Cryogens

NASA Technical Reports Server (NTRS)

Fesmire, James E.

2013-01-01

Cryogenics is globally linked to energy generation, storage, and usage. Thermal insulation systems research and development is an enabling part of NASA's technology goals for Space Launch and Exploration. New thermal testing methodologies and materials are being transferred to industry for a wide range of commercial applications.

Single Particle ICPMS for Characterizing Metal-based Nanoparticles and Monitoring Transformation Processes in Surface Water

EPA Science Inventory

Engineered metal-based nanomaterials will likely be used in increasing quantities in consumer and industrial products. These may be introduced into surface waters by a variety of paths depending on usage. Other naturally occurring and anthropogenic particles containing these met...

[Importance of Post-Marketing Studies in Gathering of Clinical Evidences for Proper Usage of Anti-Cancer Drugs, and the StudyRequirements for Their Credibility].

PubMed

Inagaki, Osamu

2016-04-01

Pharmaceutical companies recognize the importance of post-marketing studies because they are crucial in the generation of clinical evidences for the usage of new medicines. To generate clinical evidences, quality of post-marketing studies should be well controlled from view point of "ethical conduction" and "reliability of results". In addition, control of conflict of interest (COI) between researchers and industries is also indispensable and is requested for the transparency of the studies. Japan Pharmaceutical Manufacturers Association(JPMA)stresses its commitment to the progressof transparency in post-marketing studies.

The development and testing of a linear induction motor being fed from the source with limited electric power

NASA Astrophysics Data System (ADS)

Tiunov, V. V.

2018-02-01

The report provides results of the research related to the tubular linear induction motors’ application. The motors’ design features, a calculation model, a description of test specimens for mining and electric power industry are introduced. The most attention is given to the single-phase motors for high voltage switches drives with the usage of inexpensive standard single-phase transformers for motors’ power supply. The method of the motor’s parameters determination, when the motor is being fed from the transformer, working in the overload mode, was described, and the results of it practical usage were good enough for the engineering practice.

Recent advances in fluidized bed drying

NASA Astrophysics Data System (ADS)

Haron, N. S.; Zakaria, J. H.; Mohideen Batcha, M. F.

2017-09-01

Fluidized bed drying are very well known to yield high heat and mass transfer and hence adopted to many industrial drying processes particularly agricultural products. In this paper, recent advances in fluidized bed drying were reviewed and focus is given to the drying related to the usage of Computational Fluid Dynamics (CFD). It can be seen that usage of modern computational tools such as CFD helps to optimize the fluidized bed dryer design and operation for lower energy consumption and thus better thermal efficiency. Among agricultural products that were reviewed in this paper were oil palm frond, wheat grains, olive pomace, coconut, pepper corn and millet.

Poultry litter and the environment: Physiochemical properties of litter and soil during successive flock rotations and after remote site deposition.

PubMed

Crippen, Tawni L; Sheffield, Cynthia L; Byrd, J Allen; Esquivel, Jesus F; Beier, Ross C; Yeater, Kathleen

2016-05-15

The U.S. broiler meat market has grown over the past 16 years and destinations for U.S. broiler meat exports expanded to over 150 countries. This market opportunity has spurred a corresponding increase in industrialized poultry production, which due to the confined space in which high numbers of animals are housed, risks accumulating nutrients and pollutants. The purpose of this research was to determine the level of pollutants within poultry litter and the underlying soil within a production facility; and to explore the impact of spent litter deposition into the environment. The study follows a production facility for the first 2.5 years of production. It monitors the effects of successive flocks and management practices on 15 physiochemical parameters: Ca, Cu, electrical conductivity, Fe, K, Mg, Mn, moisture, Na, NO3(-)/N, organic matter, P, pH, S, and Zn. Litter samples were collected in-house, after clean-outs and during stockpiling. The soil before house placement, after the clean-outs and following litter stockpiling was monitored. Management practices markedly altered the physiochemical profiles of the litter in-house. A canonical discriminant analysis was used to describe the relationship between the parameters and sampling times. The litter profiles grouped into five clusters corresponding to time and management practices. The soil in-house exhibited mean increases in all physiochemical parameters (2-297 fold) except Fe, Mg, %M, and pH. The spent litter was followed after deposition onto a field for use as fertilizer. After 20 weeks, the soil beneath the litter exhibited increases in EC, Cu, K, Na, NO3(-)/N, %OM, P, S and Zn; while %M decreased. Understanding the impacts of industrialized poultry farms on the environment is vital as the cumulative ecological impact of this land usage could be substantial if not properly managed to reduce the risk of potential pollutant infiltration into the environment. Published by Elsevier B.V.

Shelf life and microbial profile of peeled onions

USDA-ARS?s Scientific Manuscript database

The increased usage of peeled onions over the past ten years by food service operations and fast-food restaurants has been plagued by black mold decay during cold-chain storage. This study examined the epiphytic microbiological distribution on onions and what effects various processing steps have on...

Pressure redistribution devices: what works, at what cost and what's next?

PubMed

Clancy, Michael J

2013-08-01

This article discusses the development and usage of pressure redistribution devices (PRDs) and their impact on the prevention and treatment of pressure ulcers within the NHS. The article outlines the history of the development of these devices and discusses the reasons for a lack of substantial evidence in support of the use of these devices, their impact on the NHS on cost and perceived outcome. The article describes the typical usage profile in a 500 bed NHS hospital and concludes with a view as to how that may change in the future. Copyright © 2013 Tissue Viability Society. Published by Elsevier Ltd. All rights reserved.

Assessing the impact of industrial source emissions on atmospheric carbonaceous aerosol concentrations using routine monitoring networks.

PubMed

Sheesley, Rebecca J; Schauer, James J; Orf, Marya L

2010-02-01

Industrial sources can have a significant but poorly defined impact on ambient particulate matter concentrations in select areas. Detailed emission profiles are often not available and are hard to develop because of the diversity of emissions across time and space at large industrial complexes. A yearlong study was conducted in an industrial area in Detroit, MI, which combined real-time particle mass (tapered element oscillating microbalance) and black carbon (aetholometer) measurements with molecular marker measurements of monthly average concentrations as well as daily concentrations of select high pollution days. The goal of the study was to use the real-time data to define days in which the particulate matter concentration in the atmosphere was largely impacted by local source emissions and to use daily speciation data to derive emission profiles for the industrial source. When combined with motor vehicle exhaust, wood smoke and road dust profiles, the industrial source profile was used to determine the contribution of the local industrial source to the total organic carbon (OC) concentrations using molecular marker-chemical mass balance modeling (MM-CMB). The MM-CMB analysis revealed that the industrial source had minimal impact on the monthly average carbonaceous aerosol concentration, but contributed approximately 2 microg m(-3), or a little over one-third of the total OC, on select high-impact days.

Screening the Emission Sources of Volatile Organic Compounds (VOCs) in China Based on Multi-effect Evaluation

NASA Astrophysics Data System (ADS)

Niu, H., Jr.

2015-12-01

Volatile organic compounds (VOCs) in the atmosphere have adverse impacts via three main pathways: photochemical ozone formation, secondary organic aerosol production, and direct toxicity to humans. Few studies have integrated these effects to prioritize control measures for VOCs sources. In this study, we developed a multi-effect evaluation methodology based on updated emission inventories and source profiles, which was combined with ozone formation potential (OFP), secondary organic aerosol potential (SOAP), and VOC toxicity data to identify important emission sources and key species. We derived species-specific emission inventories for 152 sources. The OFPs, SOAPs, and toxicity of each source were determined, and the contribution and share of each source to each of these adverse effects was calculated. Weightings were given to the three adverse effects by expert scoring, and the integrated impact was determined. Using 2012 as the base year, solvent usage and industrial process were found to be the most important anthropogenic sources, accounting for 24.2 and 23.1% of the integrated environmental effect, respectively. This was followed by biomass burning, transportation, and fossil fuel combustion, all of which had a similar contribution ranging from 16.7 to 18.6%. The top five industrial sources, including plastic products, rubber products, chemical fiber products, the chemical industry, and oil refining, accounted for nearly 70.0% of industrial emissions. In China, emissions reductions are required for styrene, toluene, ethylene, benzene, and m/p-xylene. The 10 most abundant chemical species contributed 76.5% of the integrated impact. Beijing, Chongqing, Shanghai, Jiangsu, and Guangdong were the five leading provinces when considering the integrated effects. Besides, the chemical mass balance model (CMB) was used to verify the VOCs inventories of 47 cities in China, so as to optimize our evaluation results. We suggest that multi-effect evaluation is necessary to identify the need for abatement at the source type and substance levels.

Passive air sampling of polybrominated diphenyl ethers in New Delhi, Kolkata, Mumbai and Chennai: Levels, homologous profiling and source apportionment.

PubMed

Chakraborty, Paromita; Zhang, Gan; Cheng, Hairong; Balasubramanian, Prithiviraj; Li, Jun; Jones, Kevin C

2017-12-01

Several studies in the recent past reported new sources for industrial persistent organic pollutants (POPs) from metropolitan cities of India. To fill the data gap for atmospheric polybrominated diphenyl ethers (PBDEs), polyurethane foam disk passive air sampling (PUF-PAS) was conducted along urban-suburban-rural transects in four quadrilateral cities viz., New Delhi, Kolkata, Mumbai and Chennai from northern, eastern, western and southern India respectively. Average concentration of Σ 8 PBDEs in pg/m 3 for New Delhi, Kolkata, Mumbai and Chennai were 198, 135, 264 and 144 respectively. We observed a distinct urban > suburban > rural trend for atmospheric PBDEs in Mumbai. Principal component analysis (PCA) attributed three different source types. BDE-47, -99, -100, -153 and -154 loaded in the first component were relatively high in the sites where industrial and informal electronic waste (e-waste) recycling activities were prevalent. Penta congener, BDE-99 and tetra congener, BDE-47 contributed 50%-75% of total PBDEs. Ratio of BDE-47 and -99 in Indian cities reflected the usage of penta formulations like Bromkal -70DE and DE-71 in the commercial and electrical products. PC-2 was loaded with BDE-28 and -35. Percentage of BDE-28 and BDE-35 (>10%) were comparatively much higher than commercial penta products. Abundance of BDE-28 in majority sites can be primarily due to re-emission from surface soil. PC-3 was loaded with BDE-183 and elevated levels were observed mostly in the industrial corridor of Indian cities. BDE-183 was notably high in the urban industrial sites of New Delhi. We suspect this octa-BDE congener resulted from recycling process of plastic products containing octa-BDE formulation used as flame retardants. Copyright © 2017 Elsevier Ltd. All rights reserved.

Utilization of coal fly ash in solidification of liquid radioactive waste from research reactor.

PubMed

Osmanlioglu, Ahmet Erdal

2014-05-01

In this study, the potential utilization of fly ash was investigated as an additive in solidification process of radioactive waste sludge from research reactor. Coal formations include various percentages of natural radioactive elements; therefore, coal fly ash includes various levels of radioactivity. For this reason, fly ashes have to be evaluated for potential environmental implications in case of further usage in any construction material. But for use in solidification of radioactive sludge, the radiological effects of fly ash are in the range of radioactive waste management limits. The results show that fly ash has a strong fixing capacity for radioactive isotopes. Specimens with addition of 5-15% fly ash to concrete was observed to be sufficient to achieve the target compressive strength of 20 MPa required for near-surface disposal. An optimum mixture comprising 15% fly ash, 35% cement, and 50% radioactive waste sludge could provide the solidification required for long-term storage and disposal. The codisposal of radioactive fly ash with radioactive sludge by solidification decreases the usage of cement in solidification process. By this method, radioactive fly ash can become a valuable additive instead of industrial waste. This study supports the utilization of fly ash in industry and the solidification of radioactive waste in the nuclear industry.

Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Mid-East Ohio Tech Prep Consortium, Zanesville.

This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

Biochar: What is the future for industrial production and world usage?

USDA-ARS?s Scientific Manuscript database

Biochar has gained world attention as a soil amendment to increase carbon sequestration, improve fertility levels and bolster soil water retention. Unfortunately, the amount of biochar needed for field application rates to achieve these results can be in the tons per hectare range. There is concer...

The Polygraph: Concept, Usage and Validity.

ERIC Educational Resources Information Center

Simpson, B. Allen

1986-01-01

Deals with the use of the "lie detector" or "polygraphic test" as a method of detecting deception in industries and law enforcement agencies. Explains what the polygraph is and how it operates. Presents a series of specific arguments for and against the validity of the instrument. Research appears to be inconclusive. (Author/ABB)

Antiparasitic efficacy of commercial curcumin against Ichthyophthirius multifiliis in grass carp (Ctenopharyngodon idellus)

USDA-ARS?s Scientific Manuscript database

Ichthyophthiriasis, caused by Ichthyophthirius multifiliis, is a prevalent parasitic disease in freshwater fish. It leads to a significant economic loss in fish farming industry. Following the ban of malachite green in usage of treating food fish, new antiparasitic agents for the treatment of ichthy...

Creating New Pricing Models for Electronic Publishing.

ERIC Educational Resources Information Center

Boelio, David B.; Knight, Nancy H.

Establishing pricing policies for electronic publishing that are fair and flexible is of vital importance to the information industry. The pricing of most information available electronically is far less efficient and market-sensitive than it could be. Some of the new approaches to pricing, emphasizing a usage-based metric providing qualitative…

Engineering the production of conjugated fatty acids in Arabidopsis thaliana leaves

USDA-ARS?s Scientific Manuscript database

The seeds of many non-domesticated plant species synthesize oils containing high amounts of a single unusual fatty acid, many of which have potential usage in industry. Despite the identification of enzymes for unusual oxidized fatty acid synthesis, the production of these fatty acids in engineered ...

Temporal Trends and Evidence of Preservation of Benzotriazoles in Coastal Sediments of the United States

EPA Science Inventory

Benzotriazoles (BZTs) are used in a wide range of commercial and industrial applications as well as consumer products. There are several categories of usage of these compounds, the major two being as an additive to provide ultraviolet (UV) stabilization for plastics and films an...

A Study of the College Textbook Market.

ERIC Educational Resources Information Center

Yankelovich, Skelly and White, Inc., New York, NY.

This report conducted for the Association of American Publishers, Inc. on the college textbook market provides the industry with operationally useful information and trend data on the prevailing attitudes, needs, purchasing and usage patterns of the prime users of college educational materials--the faculty and the students. Detailed findings…

Regulating the Internet

ERIC Educational Resources Information Center

Anderson, Byron

2007-01-01

The Internet's breakthrough to primetime usage beginning in the mid-1990s evolved in an era of openness. Unfettered access seemed key to Internet development. An important foundation for the 1996 Telecommunications Act was the theory that the telecom industry would work best if it were free of government regulation, a guiding principle that has…

Feasibility Study of Using Infrared Radiation Heating as a Sustainable Tomato Peeling Method

USDA-ARS?s Scientific Manuscript database

The yye peeling technique is putting both environmental and economic pressure on California tomato processing industry due to its associated salinity issues and wastewater disposal problems. This study is aimed at developing alternative peeling methods with reduced or no caustic usage to produce hi...

Microbiological Validation of the IVGEN System

NASA Technical Reports Server (NTRS)

Porter, David A.

2013-01-01

The principal purpose of this report is to describe a validation process that can be performed in part on the ground prior to launch, and in space for the IVGEN system. The general approach taken is derived from standard pharmaceutical industry validation schemes modified to fit the special requirements of in-space usage.

TOWARD A QUANTITATIVE COMPARATIVE TOXICOLOGY OF ORGANIC COMPOUNDS

EPA Science Inventory

There are more than 70,000 man-made chemicals in widespread usage in our world today, with additions coming along at a clip of more than 5,000 per year. esides these, hundreds of thousands of new structures are synthesized each year in many academic and industrial laboratories. o...

Preschool Children's Interaction with ICT at Home

ERIC Educational Resources Information Center

Konca, Ahmet Sami; Koksalan, Bahadir

2017-01-01

The purpose of this research is to determine preschool students' usage profile of information and communication technology (ICT). To investigate children's use of ICT, a questionnaire was completed by the parents of 703 children, age 4-6. Frequency, percentage, mean and standard deviation were used to describe the interaction. In addition,…

Discovering Student Web Usage Profiles Using Markov Chains

ERIC Educational Resources Information Center

Marques, Alice; Belo, Orlando

2011-01-01

Nowadays, Web based platforms are quite common in any university, supporting a very diversified set of applications and services. Ranging from personal management to student evaluation processes, Web based platforms are doing a great job providing a very flexible way of working, promote student enrolment, and making access to academic information…

Mobile Phone Usage and its Health Effects Among Adults in a Semi-Urban Area of Southern India

PubMed Central

Abraham, Sherin Billy; Kanimozhy, K.; Prasad, R. Vishnu; Singh, Zile; Purty, Anil J.

2016-01-01

Introduction Worldwide, mobile phone usage has been increased dramatically which could affect the health of the people. India has the second largest number of mobile phone users. However there are only few studies conducted in India to assess its effects on health. Aim To determine the prevalence and pattern of mobile phone usage and to assess the relationship between certain selected health problems and mobile phone usage among adults. Settings and Design Community-based cross-sectional study was conducted in Kottakuppam, a town panchayat in Villupuram district of Coastal Tamil Nadu, Southern India. It is a semi-urban area with a population of about 16,000. Majority of the residents are Muslim by religion and belong to different socio economic status. Materials and Methods The study was approved by the Institutional Ethics Committee. A total of 2121 study participants were interviewed by the pre-final medical students through house-to-house survey using a pretested structured questionnaire. The questionnaire included the variables such as socio demographic profile, mobile phone usage and pattern, selected health problems, perceived benefits and threats and blood pressure. Selected health problems included headache, earache, neck pain, tinnitus, painful fingers, restlessness, morning tiredness, tingling fingers, fatigue, eye symptoms, sleep disturbance and hypertension. Statistical Analysis Used Only 2054 were included for data analysis using SPSS 17 version. Proportions were calculated. Chi-square test was used to measure the p-value. The p-value < 0.05 was considered as statistically significant. Results The prevalence of mobile phone usage was 70%. Calling facility (94.2%) was used more than the SMS (67.6%). Health problems like headache, earache, tinnitus, painful fingers and restlessness etc., were found to be positively associated with mobile phone usage. There was negative association between hypertension and mobile phone usage. Conclusion The prevalence of mobile phone usage was high. There was significant association between selected health problems and mobile phone usage. In future, higher studies are required to confirm our findings. PMID:26894095

Metrication: An economic wake-up call for US industry

NASA Astrophysics Data System (ADS)

Carver, G. P.

1993-03-01

As the international standard of measurement, the metric system is one key to success in the global marketplace. International standards have become an important factor in international economic competition. Non-metric products are becoming increasingly unacceptable in world markets that favor metric products. Procurement is the primary federal tool for encouraging and helping U.S. industry to convert voluntarily to the metric system. Besides the perceived unwillingness of the customer, certain regulatory language, and certain legal definitions in some states, there are no major impediments to conversion of the remaining non-metric industries to metric usage. Instead, there are good reasons for changing, including an opportunity to rethink many industry standards and to take advantage of size standardization. Also, when the remaining industries adopt the metric system, they will come into conformance with federal agencies engaged in similar activities.

Application of Life Cycle Assessment (LCA) in Sugar Industries

NASA Astrophysics Data System (ADS)

Astuti, Arieyanti Dwi; Astuti, Rahayu Siwi Dwi; Hadiyanto, Hadiyanto

2018-02-01

Sugar is one of the main commodities that are needed for human life. The demand of sugar is very high with the trend increase from year to year. This condition makes the sugar industry become a leading industry that must be maintained sustainability. The sustainability of the sugar industry is influenced by the use of energy and natural resources and the resulting environmental impacts. Therefore, an effort is needed to analyze the environmental aspects and potential environmental impacts resulting from a product (sugar), by using Life Cycle Assessment (LCA). LCA is a very important tool for the analysis of a process/system from its cradle to grave. This technique is very useful in the estimation of energy usage and environmental load of a product/system. This paper aims to describe the main elements of sugar industries using Life Cycle Assessment.

Analysis of twelve-month degradation in three polycrystalline photovoltaic modules

NASA Astrophysics Data System (ADS)

Lai, T.; Potter, B. G.; Simmons-Potter, K.

2016-09-01

Polycrystalline silicon photovoltaic (PV) modules have the advantage of lower manufacturing cost as compared to their monocrystalline counterparts, but generally exhibit both lower initial module efficiencies and more significant early-stage efficiency degradation than do similar monocrystalline PV modules. For both technologies, noticeable deterioration in power conversion efficiency typically occurs over the first two years of usage. Estimating PV lifetime by examining the performance degradation behavior under given environmental conditions is, therefore, one of continual goals for experimental research and economic analysis. In the present work, accelerated lifecycle testing (ALT) on three polycrystalline PV technologies was performed in a full-scale, industrial-standard environmental chamber equipped with single-sun irradiance capability, providing an illumination uniformity of 98% over a 2 x 1.6m area. In order to investigate environmental aging effects, timedependent PV performance (I-V characteristic) was evaluated over a recurring, compressed day-night cycle, which simulated local daily solar insolation for the southwestern United States, followed by dark (night) periods. During a total test time of just under 4 months that corresponded to a year equivalent exposure on a fielded module, the temperature and humidity varied in ranges from 3°C to 40°C and 5% to 85% based on annual weather profiles for Tucson, AZ. Removing the temperature de-rating effect that was clearly seen in the data enabled the computation of normalized efficiency degradation with time and environmental exposure. Results confirm the impact of environmental conditions on the module long-term performance. Overall, more than 2% efficiency degradation in the first year of usage was observed for all thee polycrystalline Si solar modules. The average 5-year degradation of each PV technology was estimated based on their determined degradation rates.

Molecular and antimicrobial susceptibility profiling of atypical Streptococcus species from porcine clinical specimens.

PubMed

Moreno, Luisa Z; Matajira, Carlos E C; Gomes, Vasco T M; Silva, Ana Paula S; Mesquita, Renan E; Christ, Ana Paula G; Sato, Maria Inês Z; Moreno, Andrea M

2016-10-01

The Streptococcus species present broad phenotypic variation, making identification difficult using only traditional microbiological methods. Even though Streptococcus suis is the most important species for the worldwide swine industry, other Streptococcus species appear to be able to cause disease in swine and could represent a higher underestimated risk for porcine health. The aim of this study was to identify Streptococcus-like isolates by MALDI-TOF MS and 16S rRNA sequencing and further molecular and antibiotic susceptibility characterization of the atypical Streptococcus species capable of causing disease in swine. Fifty presumptive Streptococcus isolates from diseased pigs isolated from different Brazilian States between 2002 and 2014 were evaluated. Among the studied isolates, 26% were identified as Streptococcus hyovaginalis, 24% as Streptococcus plurianimalium, 12% as Streptococcus alactolyticus, 10% as Streptococcus hyointestinalis, and the remaining isolates belonged to Streptococcus henryi (6%), Streptococcus thoraltensis (6%), Streptococcus gallolyticus (6%), Streptococcus gallinaceus (4%), Streptococcus sanguinis (4%), and Streptococcus mitis (2%). The Streptococcus isolates were successfully identified by spectral cluster analysis and 16S rRNA sequencing with 96% of concordance between the techniques. The SE-AFLP analysis also supported Streptococcus species distinction and enabled further observation of higher genetic heterogeneity intra-species. The identified Streptococcus species presented variable MIC values to β-lactams, enrofloxacin and florfenicol, and high resistance rates to tetracyclines and macrolides, which appear to be directly related to the industry's antimicrobial usage and resistance selection. Copyright © 2016 Elsevier B.V. All rights reserved.

Levels and profiles of polychlorinated dibenzo-p-dioxin and dibenzofurans in raw and treated water from water treatment plants in Shenzhen, China.

PubMed

Lu, Feina; Jiang, Yousheng; Wu, Dongting; Zhou, Jian; Li, Shengnong; Zhang, Jianqing

2016-04-01

Levels and profiles of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) were analyzed for the first time in raw and treated water from five water treatment plants in Shenzhen, South China. The average PCDD/Fs concentrations were 32.93 pg/L (0.057 pg international toxic equivalent quantity (I-TEQ)/L) and 0.64 pg/L (0.021 pg I-TEQ/L) in raw and treated water, respectively. The removal rate of PCDD/Fs in terms of mass concentration varied from 93.4% to 98.8%, whereas a negative removal rate was observed in one plant in terms of TEQ concentration. The PCDD/Fs concentration in raw water was lower than most of the published data from other countries and regions, and the PCDD/Fs concentration in treated water was below the Maximum Contaminants Level (MCL) of 30 pg/L for dioxin in drinking water set by the US EPA. Historical pentachlorophenol usage, local waste incineration and industrial emissions, as well as surface runoff or even soil erosion, might be the main sources for PCDD/F pollution in water. The daily intake of PCDD/Fs for local residents from drinking water was estimated to be 0.69 fg I-TEQ/kg/day, which is negligible compared with that from food consumption (1.23 pg WHO-TEQ/kg/day) in the local area. Copyright © 2016 Elsevier Ltd. All rights reserved.

Profiles of Automotive Suppliers Industries--Engineered Mechanical Components and Systems : Volume I, Text.

DOT National Transportation Integrated Search

1981-09-01

This profile describes and analyzes that segment of the automotive supplier industry which provides engineered mechanical components/assemblies/systems to the prime auto manufacturers. It presents an overview of the role and structure of this industr...

Profile Change When Industry Moves Into an Area. Working Paper RID 73.7.

ERIC Educational Resources Information Center

Scott, John T., Jr.

The effects of industrialization on the economic and social profile of a rural community are described in this paper. Some of the major changes when industry moves into a community are in the land use and support systems such as an increase in the demand for water, energy, and waste disposal. Other changes are in the labor force, retail sales and…

Are We in Sync? How Industry Practitioners and Academics Profile Managerial Competencies: A Study of an Association to Advance Collegiate Schools of Business-Accredited Business School in Hong Kong

ERIC Educational Resources Information Center

Ko, Stephen; Chan, Simon C. H.

2017-01-01

The authors draw on the taxonomy of managerial competencies to assess the alignment of perceptions between industry practitioners and business academics when profiling managerial competencies required for effective performance in workplaces. Findings show that the set of managerial competency profiles, as viewed by practitioners, generally fit…

Algal biorefinery-based industry: an approach to address fuel and food insecurity for a carbon-smart world.

PubMed

Subhadra, Bobban

2011-01-15

Food and fuel production are intricately interconnected. In a carbon-smart society, it is imperative to produce both food and fuel sustainably. Integration of the emerging biorefinery concept with other industries can bring many environmental deliverables while mitigating several sustainability-related issues with respect to greenhouse gas emissions, fossil fuel usage, land use change for fuel production and future food insufficiency. A new biorefinery-based integrated industrial ecology encompasses the different value chain of products, coproducts, and services from the biorefinery industries. This paper discusses a framework to integrate the algal biofuel-based biorefinery, a booming biofuel sector, with other industries such as livestock, lignocellulosic and aquaculture. Using the USA as an example, this paper also illustrates the benefits associated with sustainable production of fuel and food. Policy and regulatory initiatives for synergistic development of the algal biofuel sector with other industries can bring many sustainable solutions for the future existence of mankind. Copyright © 2010 Society of Chemical Industry.

The AlternativeTranslational Profile That Underlies the Immune-Evasive State of Persistence in Chlamydiaceae Exploits Differential Tryptophan Contents of the Protein Repertoire

PubMed Central

Lo, Chien-Chi; Bonner, Carol A.

2012-01-01

Summary: One form of immune evasion is a developmental state called “persistence” whereby chlamydial pathogens respond to the host-mediated withdrawal of l-tryptophan (Trp). A sophisticated survival mode of reversible quiescence is implemented. A mechanism has evolved which suppresses gene products necessary for rapid pathogen proliferation but allows expression of gene products that underlie the morphological and developmental characteristics of persistence. This switch from one translational profile to an alternative translational profile of newly synthesized proteins is proposed to be accomplished by maximizing the Trp content of some proteins needed for rapid proliferation (e.g., ADP/ATP translocase, hexose-phosphate transporter, phosphoenolpyruvate [PEP] carboxykinase, the Trp transporter, the Pmp protein superfamily for cell adhesion and antigenic variation, and components of the cell division pathway) while minimizing the Trp content of other proteins supporting the state of persistence. The Trp starvation mechanism is best understood in the human-Chlamydia trachomatis relationship, but the similarity of up-Trp and down-Trp proteomic profiles in all of the pathogenic Chlamydiaceae suggests that Trp availability is an underlying cue relied upon by this family of pathogens to trigger developmental transitions. The biochemically expensive pathogen strategy of selectively increased Trp usage to guide the translational profile can be leveraged significantly with minimal overall Trp usage by (i) regional concentration of Trp residue placements, (ii) amplified Trp content of a single protein that is required for expression or maturation of multiple proteins with low Trp content, and (iii) Achilles'-heel vulnerabilities of complex pathways to high Trp content of one or a few enzymes. PMID:22688818

Industrial Technology Modernization Program. Project 80. Increase Efficiency of Card Test/Device Test Areas by the Usage of Improved Material Handling Systems. Revision 1. Phase 2

DTIC Science & Technology

1988-03-01

INDUSTRY ANALYSIS/FINDINGS 132 12 EQUIPMENT/MACHINERY ALTERNATIVES 134 13 MIS REQUIREMENTS/IMPROVEMENTS 135 14 COST BENEFIT ANALYSIS AND PROCEDURE 137 15...SOFTWARE DIAGRAM 14.0-1 COST BENEFIT ANALYSIS METHODOLOGY 138 14.3-1 PROJECT 80 EXPENDITURE SCHEDULE 141 14.4-1 PROJECT 80 CASH FLOWS 142 15.1-1 PROJECT 80...testing, streamlining work flow, and installation of ergonomically designed work cell/work centers. The benefits associated with the implementation of ITM

Industrial sector-based volatile organic compound (VOC) source profiles measured in manufacturing facilities in the Pearl River Delta, China.

PubMed

Zheng, Junyu; Yu, Yufan; Mo, Ziwei; Zhang, Zhou; Wang, Xinming; Yin, Shasha; Peng, Kang; Yang, Yang; Feng, Xiaoqiong; Cai, Huihua

2013-07-01

Industrial sector-based VOC source profiles are reported for the Pearl River Delta (PRD) region, China, based source samples (stack emissions and fugitive emissions) analyzed from sources operating under normal conditions. The industrial sectors considered are printing (letterpress, offset and gravure printing processes), wood furniture coating, shoemaking, paint manufacturing and metal surface coating. More than 250 VOC species were detected following US EPA methods TO-14 and TO-15. The results indicated that benzene and toluene were the major species associated with letterpress printing, while ethyl acetate and isopropyl alcohol were the most abundant compounds of other two printing processes. Acetone and 2-butanone were the major species observed in the shoemaking sector. The source profile patterns were found to be similar for the paint manufacturing, wood furniture coating, and metal surface coating sectors, with aromatics being the most abundant group and oxygenated VOCs (OVOCs) as the second largest contributor in the profiles. While OVOCs were one of the most significant VOC groups detected in these five industrial sectors in the PRD region, they have not been reported in most other source profile studies. Such comparisons with other studies show that there are differences in source profiles for different regions or countries, indicating the importance of developing local source profiles. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.

Plant-Wide Assessment Report for Shaw Industries, Plant #78; Aiken, SC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael Brown PE, CEM; Matt Soderlund; Bill Meffert PE

A plant-wide energy assessment sponsored by the U.S. Department of Energy was conducted at Shaw Industries Group, plant #78 in Aiken, SC. The assessment team consisted of Georgia Tech faculty from the Energy & Environmental Management Center and Shaw personnel from plant #78 and the corporate energy group. The purpose of this assessment was to uncover as many opportunities for saving energy usage and costs using techniques that have been established as best practices in the energy engineering field. In addition, these findings are to be shared with similar plants in Shaw Industries Group to multiply the lessons learned. Themore » findings from this assessment are included in this report.« less

GMO Detection

NASA Astrophysics Data System (ADS)

Ovesná, Jaroslava; Demnerová, Kateřina; Pouchová, Vladimíra

Modern agriculture and the food industry are under constant pressure to produce healthier, tastier and cheaper food, while at the same time maintaining and improving safety standards. Consequently, these industries are all the time demanding still better, more efficient genotypes of crop species and farm animals suited to a wide range of usages. Farmers, in particular, are calling for species that are more resistant to disease, that have improved adaptation to stress, and that facilitate simpler farming systems while also increasing yield and productivity. At the same time, scientists believe that such animal and crop varieties could provide a source of food for poor countries and, thereby, help to prevent, and ultimately eliminate, third-world malnutrition (Biotechnology Industry Organization, 2008; Monastra & Rossi, 2003; Herdt, 2006).

Mask Industry Assessment: 2011

NASA Astrophysics Data System (ADS)

Chan, Y. David

2011-11-01

A survey supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the tenth in the current series of annual reports. With ongoing industry support, the report has been used as one of the baselines to gain perspective on the technical and business status of the mask and microelectronics industries. It continues to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was essentially the same as the 2005 through 2010 surveys. Questions are grouped into following categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

Mask Industry Assessment: 2010

NASA Astrophysics Data System (ADS)

Hughes, Greg; Chan, David Y.

2010-09-01

A survey created supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the ninth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. It will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was basically the same as the 2005 through 2009 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

Using Human-Derived Neural Cells as an In Vitro Model for Developmental Neurotoxicity Following Exposure to Pesticides

EPA Science Inventory

Agricultural, industrial and commercial use of pesticides continues to increase with an estimated annual usage nearing a billion lbs/year. Many of these compounds target the nervous system of nuisance animals and due to their lack of selectivity, casue adverse effects in non-targ...

Feedlot research at the U.S. Meat Animal Research Center

USDA-ARS?s Scientific Manuscript database

The U.S. Meat Animal Research Center (U.S. MARC) conducts research in several areas to support the feedlot industry and the U.S. consumer. Several studies have been conducted to determine the nutrient value of emerging coproduct feeds and their usage in cattle of diverse genetics. The amount of me...

Effects of color temperatures (kelvin) of led bulbs on blood physiological variables of broilers grown to heavy weights

USDA-ARS?s Scientific Manuscript database

Light-emitting diode (LED) lighting is being used in the poultry industry to reduce energy usage in broiler production facilities. However, limited data are available comparing efficacy of different spectral distribution of LED bulbs on blood physiological variables of broilers grown to heavy weight...

Extending the uses of bioplastic granules for the application of Trichoderma biocontrol isolates in flori/horticulture and turf grass.

USDA-ARS?s Scientific Manuscript database

Bioplastic materials are gaining increasing interest in a variety of different industrial and domestic applications. Beside its usage as mulching films and plant clips in horticulture, no other agricultural applications have been proposed. In 2009 we demonstrated that granules made of the bioplastic...

Source determination of benzotriazoles in sediment cores from two urban estuaries on the Atlantic Coast of the United States

EPA Science Inventory

Benzotriazoles (BZTs) are used in a broad range of commercial and industrial products, particularly as metal corrosion inhibitors and as ultraviolet (UV) light stabilizer additives in plastics and polymers. Their long-term usage and high production volumes have resulted in the r...

Mobilising the Commodity Chain Concept in the Politics of Food and Farming

ERIC Educational Resources Information Center

Jackson, Peter; Ward, Neil; Russell, Polly

2006-01-01

Focusing on the concept of "commodity chains" within the food industry, this paper analyses the term's widespread and variable usage in both academic and policy-orientated work. Despite recent criticisms, the concept has retained its popular appeal alongside competing metaphors such as networks, circuits and assemblages. Examining the…

Extending the Use of Bioplastic Granules for the Application of Trichoderma Biocontrol Isolates in Flori/Horticulture and Turfgrass

USDA-ARS?s Scientific Manuscript database

Bioplastic materials are gaining increasing interest in a variety of different industrial and domestic applications. Beside its usage as mulching films and plant clips in horticulture, no other agricultural applications have been proposed. In 2009 we demonstrated that granules made of the bioplastic...

Harvest of Plenty - Overview

Treesearch

Philip A. Araman; John Tansey

1991-01-01

Trends in furniture fashion, consumer concerns about tropical hardwood usage and a concerted marketing drive by the American hardwood industry have each played their part in increasing the popularity of temperate hardwood in Europe in recent years. This supplement takes the reader on a trip through the hardwood producing regions of the U.S. and Canada, looking at the...

Pilot process for decolorizing/deodorizing commercial corn zein products

USDA-ARS?s Scientific Manuscript database

Corn zein is the major protein component of ground corn, and co-products of the corn ethanol industry which includes distiller’s dried grains and corn gluten meal. Zein products generated from those materials all possess some degree of yellow color and off-odor that deters their usage in food syste...

Sexed-semen usage for Holstein AI in the United States

USDA-ARS?s Scientific Manuscript database

The dairy industry has used sexed-semen to reduce the birth of undesirable bull calves for over a decade. While the efficacy of sexed-semen has been determined experimentally, we sought to tabulate statistics on the generalized use of the technology in the US dairy herd and determine its effectivene...

Enzyme Immobilization: An Overview on Methods, Support Material, and Applications of Immobilized Enzymes.

PubMed

Sirisha, V L; Jain, Ankita; Jain, Amita

Immobilized enzymes can be used in a wide range of processes. In recent years, a variety of new approaches have emerged for the immobilization of enzymes that have greater efficiency and wider usage. During the course of the last two decades, this area has rapidly expanded into a multidisciplinary field. This current study is a comprehensive review of a variety of literature produced on the different enzymes that have been immobilized on various supporting materials. These immobilized enzymes have a wide range of applications. These include applications in the sugar, fish, and wine industries, where they are used for removing organic compounds from waste water. This study also reviews their use in sophisticated biosensors for metabolite control and in situ measurements of environmental pollutants. Immobilized enzymes also find significant application in drug metabolism, biodiesel and antibiotic production, bioremediation, and the food industry. The widespread usage of immobilized enzymes is largely due to the fact that they are cheaper, environment friendly, and much easier to use when compared to equivalent technologies. © 2016 Elsevier Inc. All rights reserved.

Theoretical and practical investigation into sustainable metal joining process for the automotive industry

NASA Astrophysics Data System (ADS)

Al-Jader, M. A.; Cullen, J. D.; Shaw, Andy; Al-Shamma'a, A. I.

2011-08-01

Currently there are about 4300 weld points on the average steel vehicle. Errors and problems due to tip damage and wear can cause great losses due to production line downtime. Current industrial monitoring systems check the quality of the nugget after processing 15 cars average once every two weeks. The nuggets are examined off line using a destructive process, which takes approximately 10 days to complete causing a long delay in the production process. In this paper a simulation results using software package, SORPAS, will be presented to determined the sustainability factors in spot welding process including Voltage, Current, Force, Water cooling rates, Material thicknesses and usage. The experimental results of various spot welding processes will be investigated and reported. The correlation of experimental results shows that SORPAS simulations can be used as an off line measurement to reduce factory energy usage. This paper also provides an overview of electrode current selection and its variance over the lifetime of the electrode tip, and describes the proposed analysis system for the selection of welding parameters for the spot welding process, as the electrode tip wears.

Exploiting three kinds of interface propensities to identify protein binding sites.

PubMed

Liu, Bin; Wang, Xiaolong; Lin, Lei; Dong, Qiwen; Wang, Xuan

2009-08-01

Predicting the binding sites between two interacting proteins provides important clues to the function of a protein. In this study, we present a building block of proteins called order profiles to use the evolutionary information of the protein sequence frequency profiles and apply this building block to produce a class of propensities called order profile interface propensities. For comparisons, we revisit the usage of residue interface propensities and binary profile interface propensities for protein binding site prediction. Each kind of propensities combined with sequence profiles and accessible surface areas are inputted into SVM. When tested on four types of complexes (hetero-permanent complexes, hetero-transient complexes, homo-permanent complexes and homo-transient complexes), experimental results show that the order profile interface propensities are better than residue interface propensities and binary profile interface propensities. Therefore, order profile is a suitable profile-level building block of the protein sequences and can be widely used in many tasks of computational biology, such as the sequence alignment, the prediction of domain boundary, the designation of knowledge-based potentials and the protein remote homology detection.

English Teaching Profile: Syrian Arab Republic.

ERIC Educational Resources Information Center

British Council, London (England). English Language and Literature Div.

A description of the status and role of English language use and instruction in Syria, in which English has been given the status of the first foreign language, is presented. The following topics are reported on: (1) general usage; (2) English within the educational system, including the length of English training, testing, syllabus construction,…

An Examination of Computer Engineering Students' Perceptions about Asynchronous Discussion Forums

ERIC Educational Resources Information Center

Ozyurt, Ozcan; Ozyurt, Hacer

2013-01-01

This study was conducted in order to reveal the usage profiles and perceptions of Asynchronous Discussion Forums (ADFs) of 126 computer engineering students from the Computer Engineering Department in a university in Turkey. By using a mixed methods research design both quantitative and qualitative data were collected and analyzed. Research…

Investigating the Usability of Classroom Management Strategies among Elementary Schoolteachers

ERIC Educational Resources Information Center

Briesch, Amy M.; Briesch, Jacquelyn M.; Chafouleas, Sandra M.

2015-01-01

Although teachers are often asked to implement classroom interventions to address student behavior, little is known about their perceived usability of many evidence-based strategies. One thousand five elementary schoolteachers completed the Usage Rating Profile-Intervention-Revised (URP-IR) with regard to the use of one of five evidence-based…

Research and application of microbial enzymes--India's contribution.

PubMed

Chand, Subhash; Mishra, Prashant

2003-01-01

Enzymes have attracted the attention of scientists world over due to their wide range of physiological, analytical and industrial applications. Although enzymes have been isolated, purified and studied from microbial, animal and plant sources, microorganisms represent the most common source of enzymes due to their broad biochemical diversity, feasibility of mass culture and ease of genetic manipulation. With the advent of molecular biology techniques, a number of genes of industrially important enzymes has been cloned and expressed in order to improve the production of enzymes, substrate utilization and other commercially useful properties. Special attention has been focused on enzymes isolated from thermophiles due to their inherent stability and industrial applications. In addition, a variety of methods have been employed to modify enzymes for their industrial usage including strain improvement, chemical modifications, modification of reaction environment, immobilization and protein engineering. A wide range of applications of enzymes in different bioprocess industries is discussed.

A comparative study of fluorescent and LED lighting in industrial facilities

NASA Astrophysics Data System (ADS)

Perdahci PhD, C.; Akin BSc, H. C.; Cekic Msc, O.

2018-05-01

Industrial facilities have always been in search for reducing outgoings and minimizing energy consumption. Rapid developments in lighting technology require more energy efficient solutions not only for industries but also for many sectors and for households. Addition of solid-state technology has brought LED lamps into play and with LED lamp usage, efficacy level has reached its current values. Lighting systems which uses fluorescent and LED lamps have become the prior choice for many industrial facilities. This paper presents a comparative study about fluorescent and LED based indoor lighting systems for a warehouse building in an industrial facility in terms of lighting distribution values, colour rendering, power consumption, energy efficiency and visual comfort. Both scenarios have been modelled and simulated by using Relux and photometric data for the luminaires have been gathered by conducting tests and measurements in an accredited laboratory.

Identifying new patient prospects: efficacy of usage segmentation. For some health care services, usage-based segmentation schemes can be wasteful and ineffective.

PubMed

Sarel, D; Marmorstein, H

1996-01-01

Even though there is intuitive appeal in identifying the user profile for a given service and then targeting similar nonusers, this approach can be very misleading when marketing health care services with low market penetration. If usage segmentation is employed without checking other indicators of latent demand and perceived barriers to use, significant misallocation of marketing resources is likely to occur. Confidentiality and embarrassment can be significant barriers to use by segments that are excellent patient prospects. In this study of mental and behavioral care, females and non-whites were found to be more concerned with confidentiality than were members of the user group. Lack of awareness can be a much bigger impediment to adoption than negative attitudes. Health care marketers need to design communications that not only increase awareness and familiarity for services with low market penetration, but also address other issues of concern to highly receptive segments.

SOURCE SAMPLING FINE PARTICULATE MATTER: WOOD-FIRED INDUSTRIAL BOILER

EPA Science Inventory

The report provides a profile for a wood-fired industrial boiler equipped with a multistage electrostatic precipitator control device. Along with the profile of emissions of fine particulate matter of aerodynamic diameter of 2.5 micrometers or less (PM-2.5), data are also provide...

Possibilities of practical usage of dispersed aluminim oxidation by liquid water

NASA Astrophysics Data System (ADS)

Larichev, M. N.; Laricheva, O. O.; Shaitura, N. S.; Shkolnikov, E. I.

2012-12-01

The goal of this work is to show the possibility of practical usage of the environmentally pure oxidation process of preliminarily dispersed aluminum (aluminum powders of the ASD or PAD grade according to TU (Technical Specifications) 48-5-226-87, which are serially produced in industry) with liquid water in order to obtain gaseous hydrogen in volumes sufficient to provide the operation of energizers based on airhydrogen fuel cells (AHFC) for portable and stationary devices (up to 3 kW). It is shown that the synthesis of aluminum oxides-hydroxides with the specified phase and chemical compositions as well as the particle shape and size can be provided simultaneously with producing commercial hydrogen. The practical usage of hydrogen, which is formed in the oxidation reaction of metallic aluminum with liquid water at pressures close to atmospheric (particularly, to service AHFCs), requires reaction intensification to increase the oxidation rate of aluminum. In this work, we considered the aspects of practical implementation of thermal, ultrasonic, and chemical activation as well as their combinations for this purpose. As the chemical activator of oxidation, we used the additives of calcium oxide (<5% of the mass of oxidized aluminum). Application of each activation method affects the phase and chemical compositions as well as the structure of formed aluminum hydroxides, which provides the possibility of their reproducible production. Thus, simultaneously with the production of commercial hydrogen, solid oxidation products satisfying the needs of industry in aluminum oxides and having the specified composition, purity, and particle shape and size can be synthesized. The acquired experimental results and elements of the design of specially developed industrial apparatuses, which were used when performing this work, can be applied when designing the model of the hydrogen generator—the prototype of the hydrogen generator for portable and stationary devices or devices of the corresponding productivity for manufacturing commercial aluminum oxides.

Latent profile analysis of lifestyle characteristics and health risk behaviors among Koreans who have completed industrial accident care.

PubMed

Choi, Wan-Suk; Moon, Ok-Kon; Yeum, Dong-Moon

2017-10-07

This study investigated the characteristics and health behavior profiles of 1,803 workers who had experienced industrial accidents. Average weekly exercise days, average number of cigarettes smoked per day, average daily sleep duration, and number of days of alcohol consumption were selected to investigate health behavior profiles. Specifically, latent profile analysis was applied to identify the health behavior profiles of people who had completed industrial accident care; the latent classes were the health-conscious type (n=240), the potential-risk type (n=850), and the high-risk type (n=713). Comparison of the health-conscious and potential-risk types indicated that younger subjects, the employed, and those with lower social status and life satisfaction were more likely to be the potential-risk type. Comparison of the health-conscious and high-risk types revealed that males, younger subjects, the employed, those without chronic illnesses, and those with lower social status and life satisfaction were more likely to be the high-risk type. The results suggest that industrial accident victims who have completed accident care have different health behaviors and it is necessary to improve health promotion based on health type characteristics.

Use of Bisphenol A-containing baby bottles in Cameroon and Nigeria and possible risk management and mitigation measures: community as milestone for prevention.

PubMed

Pouokam, Guy Bertrand; Ajaezi, Godwin Chukwuebuka; Mantovani, Alberto; Orisakwe, Orish Ebere; Frazzoli, Chiara

2014-05-15

The plasticizer Bisphenol A (BPA) is banned in baby bottles in many industrialized countries due to safety concerns. We provide a pilot view on the potential BPA exposure of bottle-fed children in sub-Saharan Africa through an enquiry on availability, accessibility and affordability of plastic baby bottles, usage pattern, and risk perception. An observational survey was conducted in a randomized group of vending sites (34 pharmacies; 87 shops and markets), in three cities (Yaoundé, Foumbot, Bafoussam) in Cameroon (two regions), and in two cities (Lagos, Port Harcourt) in Nigeria (two states). Interviews in vending sites and group discussions were conducted with 248 mothers. Cameroon and Nigeria showed a largely comparable situation. Plastic baby bottles are largely imported from industrialized countries, where a label indicates the presence/absence of BPA. In pharmacies most plastic baby bottles are labeled as BPA-free, whereas most bottles sold in shops are not BPA-free. BPA-containing bottles are more accessible and affordable, due to sale in common shops and lower costs. The meaning of the label BPA-free is unknown to both vendors and customers: the BPA issue is also largely unknown to policy makers and media and no regulation exists on food contact materials. The wide availability of BPA-containing baby bottles, lack of information and usage patterns (e.g. temperature and duration of heating) suggest a likely widespread exposure of African infants. Possible usage recommendations to mitigate exposure are indicated. Risk communication to policy makers, sellers and citizens is paramount to raise awareness and to oppose possible dumping from countries where BPA-containing materials are banned. Our pilot study points out relevant global health issues such as the capacity building of African communities on informed choices and usage of baby products, and the exploitation of international knowledge by African scientists and risk managers. Copyright © 2014 Elsevier B.V. All rights reserved.

Internet usage and knowledge of radiation health effects and preventive behaviours among workers in Fukushima after the Fukushima Daiichi nuclear power plant accident.

PubMed

Kanda, Hideyuki; Takahashi, Kenzo; Sugaya, Nagisa; Mizushima, Shunsaku; Koyama, Kikuo

2014-10-01

The Fukushima Daiichi nuclear power plant accident (FDNPPA) was the world's second largest nuclear power plant accident. At the time that it occurred, internet usage prevalence in Japan was as high as 80%. To compare health knowledge on radiation and preventive behaviour between internet users and non-users among adults employed in industries in Fukushima after the nuclear disaster. We conducted a cross-sectional questionnaire study among adults employed in industries in Fukushima 3-5 months after the FDNPPA. Targets were 1394 regular workers who took part in health seminars provided by the Fukushima Occupational Health Promotion Center. After applying the selection criteria, there were 1119 eligible participants. The questionnaire asked for personal characteristics and main sources of information about the FDNPPA, as well as health knowledge on radiation and preventive behaviours following the nuclear accident. We assessed the contribution of each variable using logistic regression analysis. Among the eligible respondents, 637 workers (56.9%) were internet users and 482 (43.1%) were non-users. Internet users had more health knowledge than non-users (average 4.6 radiation-related health conditions in internet users vs 3.6 conditions in non-users) and more preventive behaviours (average 2.6 behaviours in internet users vs 1.9 in non-users). According to logistic regression analyses, internet usage was positively associated with greater health knowledge on radiation (OR 1.13; 95% CI 1.08 to 1.20) and more preventive behaviours (OR 1.14; 95% CI 1.07 to 1.23). Internet usage was significantly and positively associated with greater health knowledge and more preventive behaviours. The internet is a useful method of distributing information to the general public in emergency situations such as a nuclear disaster. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Identification of patent in incentivizing innovation for sustainability in the construction industry

NASA Astrophysics Data System (ADS)

Zakaria, Sharifah Akmam Syed; Sadullah, Ahmad Farhan Mohd; Majid, Taksiah A.; Ghazali, Farid Ezanee Mohamed

2017-07-01

The increasing trend of research and innovation developments in the field of construction industry and their impacts on the national economy have raised much attention in the recent years. In this respect, through the relationship that exists between innovation and patent protection means that the education system of civil engineering has to gear itself to provide a sense of direction to facilitate future civil engineers to meet the challenges through innovation. The aim of this paper is to examine the educational experience and inclination of civil engineering students at Universiti Sains Malaysia in terms of their educational readiness to invent and innovate based on patents' exploration. Specifically, this paper presents research evidence using a quantitative method through questionnaire surveys in determining the dimension of patent information usage for innovation purposes, with attention to the hierarchy of each usage aspect and outcome measures reported. Results of this study revealed that majority of the participants have a "simplistic and superficial" ideas of patents identification as a source of innovation. Although a fair number of participants have relatively good knowledge of patents and innovation, lack of practical exposure and experience in construction industry are still a problem frequently encountered in the preparation to invent and innovate based on patents' exploration. It is recommended that the research model is tested using a greater number of research participants.

Patterns of home and community care service delivery to culturally and linguistically diverse residents of rural Victoria.

PubMed

Ward, Bernadette M; Anderson, Karen S; Sheldon, Maria S

2005-12-01

To describe and compare patterns of Home and Community Care (HACC) utilisation among culturally and linguistically diverse (CALD) people and Australian-born residents of rural Victoria. The HACC Minimum Data Set provides information regarding levels of service provision and coverage in Victoria. Data from January to June 2002 were analysed to provide a profile of client characteristics and service usage in rural Victoria. Patterns of service utilisation were compared with the profile of the CALD population in the 2001 Census. The proportion of CALD residents who are HACC clients is consistent with demographic profiles. However, their extent of service usage is not consistent with patterns of use by Australian-born residents. HACC clients born in non-English-speaking countries, receive 35% less hours of HACC service than their Australian-born counterparts. HACC clients born overseas in English-speaking countries receive nine per cent less hours of HACC service than the Australian-born group (F = 8.9, P = 0.00). Both groups of overseas-born clients use a smaller range of HACC services (F = 1.9, P = 0.16). Planners and service providers need to monitor levels of HACC service delivery among population groups to ensure that CALD population groups receive equitable levels of HACC services. The HACC Minimum Data Set is one source of data that can assist in this process.

Selling in a Dying Business: An Analysis of Trends During a Period of Major Market Transition in the Funeral Industry.

PubMed

Beard, Virginia R; Burger, William C

2017-01-01

As a result of recent economic changes in the United States and cultural changes among the population, the funeral industry has experienced a "legitimation crisis." The objective of this research is to examine new advertising and marketing strategies engaged in by professionals in the funeral industry to respond to market and cultural changes that have affected both the funeral industry at large and the role of the funeral director as a participant in this industry. A meta-analysis of articles from issues of the industry trade journal American Funeral Director for the years 2008 through 2015 was conducted. Two major themes emerged from the data. First, that funeral home owners should respond to market changes by using their assets for diverse reasons and second that forms of community engagement can create feelings of goodwill that will increase usage and loyalty from families. Within each of these major themes, a variety of subthemes emerged from the data.

Historical sediment record and levels of PCBs in sediments and mangroves of Jobos Bay, Puerto Rico.

PubMed

Alegria, Henry; Martinez-Colon, Michael; Birgul, Askin; Brooks, Gregg; Hanson, Lindsey; Kurt-Karakus, Perihan

2016-12-15

Polychlorinated biphenyls (PCBs) were quantified in 18 surface sediment samples, 1 sediment core, and several mangrove tissue samples collected in Jobos Bay, Puerto Rico in September 2013. Total PCBs in surface sediments ranged from 0.42 to 1232ngg -1 dw. Generally, higher levels were observed near-shore close to urban and industrial areas. The levels suggest significant pollution in Jobos Bay with respect to PCBs. Two-thirds of the sites were dominated by lighter PCB congeners (tri- to penta-chlorinated PCBs) while one-third had heavy PCB congeners (hexa- to octa-chlorinated PCBs) dominant. Total PCBs in a sediment core indicated levels fluctuating according to historical usage patterns. Total PCBs were measured in mangal leaves (14-747ngg -1 dw), roots (0.26-120ngg -1 dw), and seeds (16-93ngg -1 dw), suggesting bioaccumulation from sediments. This is the first report of a historical profile of PCBs in the study area and of PCB bioaccumulation in mangroves. This article provides new and useful information on PCBs in the Caribbean area of the GRULAC region. Copyright © 2016 Elsevier B.V. All rights reserved.

Review of coal bottom ash and coconut shell in the production of concrete

NASA Astrophysics Data System (ADS)

Faisal, S. K.; Mazenan, P. N.; Shahidan, S.; Irwan, J. M.

2018-04-01

Concrete is the main construction material in the worldwide construction industry. High demand of sand in the concrete production have been increased which become the problems in industry. Natural sand is the most common material used in the construction industry as natural fine aggregate and it caused the availability of good quality of natural sand keep decreasing. The need for a sustainable and green construction building material is required in the construction industry. Hence, this paper presents utilization of coal bottom ash and coconut shell as partial sand replacement in production of concrete. It is able to save cost and energy other than protecting the environment. In summary, 30% usage of coal bottom ash and 25% replacement of coconut shell as aggregate replacement show the acceptable and satisfactory strength of concrete.

Development of a High-Efficiency Transformation Method and Implementation of Rational Metabolic Engineering for the Industrial Butanol Hyperproducer Clostridium saccharoperbutylacetonicum Strain N1-4.

PubMed

Herman, Nicolaus A; Li, Jeffrey; Bedi, Ripika; Turchi, Barbara; Liu, Xiaoji; Miller, Michael J; Zhang, Wenjun

2017-01-15

While a majority of academic studies concerning acetone, butanol, and ethanol (ABE) production by Clostridium have focused on Clostridium acetobutylicum, other members of this genus have proven to be effective industrial workhorses despite the inability to perform genetic manipulations on many of these strains. To further improve the industrial performance of these strains in areas such as substrate usage, solvent production, and end product versatility, transformation methods and genetic tools are needed to overcome the genetic intractability displayed by these species. In this study, we present the development of a high-efficiency transformation method for the industrial butanol hyperproducer Clostridium saccharoperbutylacetonicum strain N1-4 (HMT) ATCC 27021. Following initial failures, we found that the key to creating a successful transformation method was the identification of three distinct colony morphologies (types S, R, and I), which displayed significant differences in transformability. Working with the readily transformable type I cells (transformation efficiency, 1.1 × 10 6 CFU/μg DNA), we performed targeted gene deletions in C. saccharoperbutylacetonicum N1-4 using a homologous recombination-mediated allelic exchange method. Using plasmid-based gene overexpression and targeted knockouts of key genes in the native acetone-butanol-ethanol (ABE) metabolic pathway, we successfully implemented rational metabolic engineering strategies, yielding in the best case an engineered strain (Clostridium saccharoperbutylacetonicum strain N1-4/pWIS13) displaying an 18% increase in butanol titers and 30% increase in total ABE titer (0.35 g ABE/g sucrose) in batch fermentations. Additionally, two engineered strains overexpressing aldehyde/alcohol dehydrogenases (encoded by adh11 and adh5) displayed 8.5- and 11.8-fold increases (respectively) in batch ethanol production. This paper presents the first steps toward advanced genetic engineering of the industrial butanol producer Clostridium saccharoperbutylacetonicum strain N1-4 (HMT). In addition to providing an efficient method for introducing foreign DNA into this species, we demonstrate successful rational engineering for increasing solvent production. Examples of future applications of this work include metabolic engineering for improving desirable industrial traits of this species and heterologous gene expression for expanding the end product profile to include high-value fuels and chemicals. Copyright © 2016 American Society for Microbiology.

Development of a High-Efficiency Transformation Method and Implementation of Rational Metabolic Engineering for the Industrial Butanol Hyperproducer Clostridium saccharoperbutylacetonicum Strain N1-4

PubMed Central

Herman, Nicolaus A.; Li, Jeffrey; Bedi, Ripika; Turchi, Barbara; Liu, Xiaoji

2016-01-01

ABSTRACT While a majority of academic studies concerning acetone, butanol, and ethanol (ABE) production by Clostridium have focused on Clostridium acetobutylicum, other members of this genus have proven to be effective industrial workhorses despite the inability to perform genetic manipulations on many of these strains. To further improve the industrial performance of these strains in areas such as substrate usage, solvent production, and end product versatility, transformation methods and genetic tools are needed to overcome the genetic intractability displayed by these species. In this study, we present the development of a high-efficiency transformation method for the industrial butanol hyperproducer Clostridium saccharoperbutylacetonicum strain N1-4 (HMT) ATCC 27021. Following initial failures, we found that the key to creating a successful transformation method was the identification of three distinct colony morphologies (types S, R, and I), which displayed significant differences in transformability. Working with the readily transformable type I cells (transformation efficiency, 1.1 × 106 CFU/μg DNA), we performed targeted gene deletions in C. saccharoperbutylacetonicum N1-4 using a homologous recombination-mediated allelic exchange method. Using plasmid-based gene overexpression and targeted knockouts of key genes in the native acetone-butanol-ethanol (ABE) metabolic pathway, we successfully implemented rational metabolic engineering strategies, yielding in the best case an engineered strain (Clostridium saccharoperbutylacetonicum strain N1-4/pWIS13) displaying an 18% increase in butanol titers and 30% increase in total ABE titer (0.35 g ABE/g sucrose) in batch fermentations. Additionally, two engineered strains overexpressing aldehyde/alcohol dehydrogenases (encoded by adh11 and adh5) displayed 8.5- and 11.8-fold increases (respectively) in batch ethanol production. IMPORTANCE This paper presents the first steps toward advanced genetic engineering of the industrial butanol producer Clostridium saccharoperbutylacetonicum strain N1-4 (HMT). In addition to providing an efficient method for introducing foreign DNA into this species, we demonstrate successful rational engineering for increasing solvent production. Examples of future applications of this work include metabolic engineering for improving desirable industrial traits of this species and heterologous gene expression for expanding the end product profile to include high-value fuels and chemicals. PMID:27836845

Assessing the motor carrier industry and its segments : current and prospective issues, 2006.

DOT National Transportation Integrated Search

2006-04-01

This report updates the Motor Carrier Industry Profile: An Update 2004-2005 to reflect recent changes in the motor carrier industry. This document relies heavily on industry trade journals, company annual reports and other industry surveys as sources...

Interface between authorship, industry and science in the domain of therapeutics.

PubMed

Healy, David; Cattell, Dinah

2003-07-01

Changes in the character of medical authorship. Aims To compare the impact of industry-linked and non-industry linked articles. We compared articles on sertraline being coordinated by a medical writing agency with articles not coordinated in this way. We calculated numbers of Medline-listed articles per author, journal impact factors, literature profiles and citation rates of both sets of articles. Non-agency-linked articles on sertraline had an average of 2.95 authors per article, a mean length of 3.4 pages, a mean Medline listing of 37 articles per author (95% CI 27-47) and a mean literature profile of 283 per article (95% CI 130-435). Agency-linked articles on sertraline had an average of 6.6 authors per article, a mean length of 10.7 pages, a mean Medline listing of 70 articles per author (95% CI 62-79) and a mean literature profile of 1839 per article (95% CI 1076-2602). The citation rate for agency articles was 20.2 (95% CI 13.4-27.0) and for non-agency articles it was 3.7 (95% CI 3.3-8.1). The literature profiles and citation rates of industry-linked and non-industry-linked articles differ. The emerging style of authorship in industry-linked articles can deliver good-quality articles, but it raises concerns for the scientific base of therapeutics.

Curricula and Programmes in Petroleum Engineering for Higher Technical Education Institutions: Comparative Analysis

ERIC Educational Resources Information Center

Tymkiv, Nadiya

2018-01-01

The article states the analysis of the curriculum that regulates the main purposes, essence and directions for petroleum training. The importance and necessity of positive usage of Austrian, English and Norwegian experience at the time of petroleum engineers training in the petroleum industry has been stressed on. The structure and content of…

Hands-on Precision Agriculture Data Management Workshops for Producers and Industry Professionals: Development and Assessment

ERIC Educational Resources Information Center

Luck, Joe D.; Fulton, John P.; Rees, Jennifer

2015-01-01

Three Precision Agriculture Data Management workshops regarding yield monitor data were conducted in 2014, reaching 62 participants. Post-workshop surveys (n = 58) indicated 73% of respondents experienced a moderate to significant increase in knowledge related to yield monitor data usage. Another 72% reported that they planned to utilize best…

Service engineering for grid services in medicine and life science.

PubMed

Weisbecker, Anette; Falkner, Jürgen

2009-01-01

Clearly defined services with appropriate business models are necessary in order to exploit the benefit of grid computing for industrial and academic users in medicine and life sciences. In the project Services@MediGRID the service engineering approach is used to develop those clearly defined grid services and to provide sustainable business models for their usage.

41 CFR 102-76.25 - What standards must Federal agencies meet in providing architectural and interior design services?

Code of Federal Regulations, 2012 CFR

2012-01-01

... Public Contracts and Property Management Federal Property Management Regulations System (Continued... accordance with the standards in § 102-76.65. (c) Use metric specifications in construction where the metric system is the accepted industry standard, and to the extent that such usage is economically feasible and...

41 CFR 102-76.25 - What standards must Federal agencies meet in providing architectural and interior design services?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Public Contracts and Property Management Federal Property Management Regulations System (Continued... accordance with the standards in § 102-76.65. (c) Use metric specifications in construction where the metric system is the accepted industry standard, and to the extent that such usage is economically feasible and...

41 CFR 102-76.25 - What standards must Federal agencies meet in providing architectural and interior design services?

Code of Federal Regulations, 2011 CFR

2011-01-01

... Public Contracts and Property Management Federal Property Management Regulations System (Continued... accordance with the standards in § 102-76.65. (c) Use metric specifications in construction where the metric system is the accepted industry standard, and to the extent that such usage is economically feasible and...

41 CFR 102-76.25 - What standards must Federal agencies meet in providing architectural and interior design services?

Code of Federal Regulations, 2014 CFR

2014-01-01

... Public Contracts and Property Management Federal Property Management Regulations System (Continued... accordance with the standards in § 102-76.65. (c) Use metric specifications in construction where the metric system is the accepted industry standard, and to the extent that such usage is economically feasible and...

Cotton, tomato, corn, and onion production with subsurface drip irrigation – a review

USDA-ARS?s Scientific Manuscript database

The usage of subsurface drip irrigation (SDI) has increased by 89% in the USA during the last ten years according to USDA NASS estimates and over 93% of the SDI land area is located in just ten states. Combining public entity and private industry perceptions of SDI in these ten states, the major cro...

Prognostics Uncertainty Management with Application to Government and Industry

NASA Technical Reports Server (NTRS)

Celaya, Jose; Sankararaman, Shankar; Daigle, Matthew; Saxena, Abhinav; Goebel, Kai

2014-01-01

Predictions about the future are contingent on future usage, but also on the quality of the models employed and the assessment of the current health state. These factors, amongst others, need to be considered to arrive at a prediction that is conducted through a rigorous method but where the confidence bounds are not prohibitively large.

What's in a Name? The 1940s-1950s "Squaw Dress"

ERIC Educational Resources Information Center

Parezo, Nancy J.; Jones, Angelina R.

2009-01-01

Many commercial images and names linked to Native Americans are created for and perpetuated by popular culture and stem from past linguistic usage. In this article the authors present a case study of the questionable naming and the quiet, almost unnoticed, righting of a name for a Native derived garment in the American clothing industry, the…

Impact of Functional Characteristics on Usage of LSS Methods in IT and Perceived Project Success

ERIC Educational Resources Information Center

Mushi, Francis Jeremiah

2014-01-01

High rates of Information Technology (IT) project failures continues; fail to meet established deadlines, exceeding budget, or not agreed-upon functionality. Failure often results from a fundamental confusion over what is involved in the project. Methods that have provided project success in Service and Manufacturing industries have not been…

Genetically modified plants and food hypersensitivity diseases: usage and implications of experimental models for risk assessment.

PubMed

Prescott, Vanessa E; Hogan, Simon P

2006-08-01

The recent advances in biotechnology in the plant industry have led to increasing crop production and yield that in turn has increased the usage of genetically modified (GM) food in the human food chain. The usage of GM foods for human consumption has raised a number of fundamental questions including the ability of GM foods to elicit potentially harmful immunological responses, including allergic hypersensitivity. To assess the safety of foods derived from GM plants including allergenic potential, the US FDA, Food and Agriculture Organization of the United Nations (FAO)/World Health Organization (WHO), and the EU have developed approaches for evaluation assessment. One assessment approach that has been a very active area of research and debate is the development and usage of animal models to assess the potential allergenicity of GM foods. A number of specific animal models employing rodents, pigs, and dogs have been developed for allergenicity assessment. However, validation of these models is needed and consideration of the criteria for an appropriate animal model for the assessment of allergenicity in GM plants is required. We have recently employed a BALB/c mouse model to assess the potential allergenicity of GM plants. We have been able to demonstrate that this model is able to detect differences in antigenicity and identify aspects of protein post-translational modifications that can alter antigenicity. Furthermore, this model has also enabled us to examine the usage of GM plants as a therapeutic approach for the treatment of allergic diseases. This review discusses the current approaches to assess the allergenic potential of GM food and particularly focusing on the usage of animal models to determine the potential allergenicity of GM foods and gives an overview of our recent findings and implications of these studies.

Google Scholar Users and User Behaviors: An Exploratory Study

ERIC Educational Resources Information Center

Herrera, Gail

2011-01-01

The University of Mississippi Library created a profile to provide linking from Google Scholar (GS) to library resources in 2005. Although Google Scholar does not provide usage statistics for institutions, use of Google Scholar is clearly evident in looking at library link resolver logs. The purpose of this project is to examine users of Google…

Prevalence and Reasons for University Library Usage.

ERIC Educational Resources Information Center

Jiao, Qun G.; Onwuegbuzie, Anthony J.; Daley, Christine E.

A study of 522 university students was undertaken to determine how often they used their library and why, as well as to develop a general profile of college student library users. Descriptive statistics revealed that the majority of students used the library at least once a week. Obtaining a book or an article for a course paper was the most…

Watson for Genomics: Moving Personalized Medicine Forward.

PubMed

Rhrissorrakrai, Kahn; Koyama, Takahiko; Parida, Laxmi

2016-08-01

The confluence of genomic technologies and cognitive computing has brought us to the doorstep of widespread usage of personalized medicine. Cognitive systems, such as Watson for Genomics (WG), integrate massive amounts of new omic data with the current body of knowledge to assist physicians in analyzing and acting on patient's genomic profiles. Copyright © 2016 Elsevier Inc. All rights reserved.

Past Tense Production by English Second Language Learners with and without Language Impairment

ERIC Educational Resources Information Center

Blom, Elma; Paradis, Johanne

2013-01-01

Purpose: This study investigated whether past tense use could differentiate children with language impairment (LI) from their typically developing (TD) peers when English is children's second language (L2) and whether L2 children's past tense profiles followed the predictions of Bybee's (2007) usage-based network model. Method: A group of L2…

Recent Developments in Production and Biotechnological Applications of C-Phycocyanin

PubMed Central

Kuddus, M.; Singh, P.; Thomas, G.; Al-Hazimi, Awdah

2013-01-01

An extensive range of pigments including phycobiliproteins are present in algae. C-phycocyanin (C-PC), a phycobiliprotein, is one of the key pigments of Spirulina, a microalgae used in many countries as a dietary supplement. Algal pigments have massive commercial value as natural colorants in nutraceutical, cosmetics, and pharmaceutical industries, besides their health benefits. At present, increasing awareness of harmful effects of synthetic compounds and inclination of community towards the usage of natural products have led to the exploitation of microalgae as a source of natural pigments/colors. This review describes recent findings about the sources and production of C-PC, with emphasis on specific techniques for extraction and purification, along with potential industrial applications in diagnostics, foods, cosmetics, and pharmaceutical industries. PMID:24063013

Recent developments in production and biotechnological applications of C-phycocyanin.

PubMed

Kuddus, M; Singh, P; Thomas, G; Al-Hazimi, Awdah

2013-01-01

An extensive range of pigments including phycobiliproteins are present in algae. C-phycocyanin (C-PC), a phycobiliprotein, is one of the key pigments of Spirulina, a microalgae used in many countries as a dietary supplement. Algal pigments have massive commercial value as natural colorants in nutraceutical, cosmetics, and pharmaceutical industries, besides their health benefits. At present, increasing awareness of harmful effects of synthetic compounds and inclination of community towards the usage of natural products have led to the exploitation of microalgae as a source of natural pigments/colors. This review describes recent findings about the sources and production of C-PC, with emphasis on specific techniques for extraction and purification, along with potential industrial applications in diagnostics, foods, cosmetics, and pharmaceutical industries.

Comprehensive analysis of the codon usage patterns in the envelope glycoprotein E2 gene of the classical swine fever virus

PubMed Central

Chi, Xiaojuan; Wang, Song; Ma, Yanmei; Chen, Jilong

2017-01-01

The classical swine fever virus (CSFV), circulating worldwide, is a highly contagious virus. Since the emergence of CSFV, it has caused great economic loss in swine industry. The envelope glycoprotein E2 gene of the CSFV is an immunoprotective antigen that induces the immune system to produce neutralizing antibodies. Therefore, it is essential to study the codon usage of the E2 gene of the CSFV. In this study, 140 coding sequences of the E2 gene were analyzed. The value of effective number of codons (ENC) showed low codon usage bias in the E2 gene. Our study showed that codon usage could be described mainly by mutation pressure ENC plot analysis combined with principal component analysis (PCA) and translational selection-correlation analysis between the general average hydropathicity (Gravy) and aromaticity (Aroma), and nucleotides at the third position of codons (A3s, T3s, G3s, C3s and GC3s). Furthermore, the neutrality analysis, which explained the relationship between GC12s and GC3s, revealed that natural selection had a key role compared with mutational bias during the evolution of the E2 gene. These results lay a foundation for further research on the molecular evolution of CSFV. PMID:28880881

Comprehensive analysis of the codon usage patterns in the envelope glycoprotein E2 gene of the classical swine fever virus.

PubMed

Chen, Ye; Li, Xinxin; Chi, Xiaojuan; Wang, Song; Ma, Yanmei; Chen, Jilong

2017-01-01

The classical swine fever virus (CSFV), circulating worldwide, is a highly contagious virus. Since the emergence of CSFV, it has caused great economic loss in swine industry. The envelope glycoprotein E2 gene of the CSFV is an immunoprotective antigen that induces the immune system to produce neutralizing antibodies. Therefore, it is essential to study the codon usage of the E2 gene of the CSFV. In this study, 140 coding sequences of the E2 gene were analyzed. The value of effective number of codons (ENC) showed low codon usage bias in the E2 gene. Our study showed that codon usage could be described mainly by mutation pressure ENC plot analysis combined with principal component analysis (PCA) and translational selection-correlation analysis between the general average hydropathicity (Gravy) and aromaticity (Aroma), and nucleotides at the third position of codons (A3s, T3s, G3s, C3s and GC3s). Furthermore, the neutrality analysis, which explained the relationship between GC12s and GC3s, revealed that natural selection had a key role compared with mutational bias during the evolution of the E2 gene. These results lay a foundation for further research on the molecular evolution of CSFV.

Organizational culture, creative behavior, and information and communication technology (ICT) usage: a facet analysis.

PubMed

Carmeli, Abraham; Sternberg, Akiva; Elizur, D

2008-04-01

Despite the prominence of organizational culture (OC), this concept is controversial and its structure has yet to be systematically analyzed. This study develops a three-pronged formal definitional framework on the basis of facet theory (FT) and explores behavior modality, referent, and object. This facet analysis (FA) of OC accounts successfully for variation in both creative behavior at work and the usage of information and communication technologies (ICTs). An analysis of data collected from 230 employees in the financial industry indicates that a radex structure was obtained for work and ICT. The behavior modality facet ordered the space from center to periphery, and referents facet relates to the direction angles away from the origin.

Environmental benefits of chemical propulsion

NASA Technical Reports Server (NTRS)

Hayes, Joyce A.; Goldberg, Benjamin E.; Anderson, David M.

1995-01-01

This paper identifies the necessity of chemical propulsion to satellite usage and some of the benefits accrued through monitoring global resources and patterns, including the Global Climate Change Model (GCM). The paper also summarized how the satellite observations are used to affect national and international policies. Chemical propulsion, like all environmentally conscious industries, does provide limited, controlled pollutant sources through its manufacture and usage. However, chemical propulsion is the sole source which enables mankind to launch spacecraft and monitor the Earth. The information provided by remote sensing directly affects national and international policies designed to protect the environment and enhance the overall quality of life on Earth. The resultant of chemical propulsion is the capability to reduce overall pollutant emissions to the benefit of mankind.

Prevalence and usage of printed and electronic drug references and patient medication records in community pharmacies in Malaysia.

PubMed

Usir, Ezlina; Lua, Pei Lin; Majeed, Abu Bakar Abdul

2012-06-01

This study aimed to determine the availability and usage of printed and electronic references and Patient Medication Record in community pharmacy. It was conducted for over 3 months from 15 January to 30 April 2007. Ninety-three pharmacies participated. Structured questionnaires were mailed to community pharmacies. Six weeks later a reminder was sent to all non responders, who were given another six weeks to return the completed questionnaire. Outcomes were analyzed using descriptive statistics and chi-square test of independence. Almost all the pharmacies (96.8%) have at least Monthly Index of Medical Specialties (MIMS) while 78.5% have at least MIMS ANNUAL in their stores. Only about a third (31.2%) of the pharmacies were equipped with online facilities of which the majority referred to medical websites (88.9%) with only a minority (11.1%) referring to electronic journals. More than half (59.1%) of the pharmacists kept Patient Medication Record profiles with 49.1% storing it in paper, 41.8% electronically and 9.1% in both printed and electronic versions. In general, prevalence and usage of electronic references in community pharmacies were rather low. Efforts should be increased to encourage wider usage of electronic references and Patient Medication Records in community pharmacies to facilitate pharmaceutical care.

Sensor Based Engine Life Calculation: A Probabilistic Perspective

NASA Technical Reports Server (NTRS)

Guo, Ten-Huei; Chen, Philip

2003-01-01

It is generally known that an engine component will accumulate damage (life usage) during its lifetime of use in a harsh operating environment. The commonly used cycle count for engine component usage monitoring has an inherent range of uncertainty which can be overly costly or potentially less safe from an operational standpoint. With the advance of computer technology, engine operation modeling, and the understanding of damage accumulation physics, it is possible (and desirable) to use the available sensor information to make a more accurate assessment of engine component usage. This paper describes a probabilistic approach to quantify the effects of engine operating parameter uncertainties on the thermomechanical fatigue (TMF) life of a selected engine part. A closed-loop engine simulation with a TMF life model is used to calculate the life consumption of different mission cycles. A Monte Carlo simulation approach is used to generate the statistical life usage profile for different operating assumptions. The probabilities of failure of different operating conditions are compared to illustrate the importance of the engine component life calculation using sensor information. The results of this study clearly show that a sensor-based life cycle calculation can greatly reduce the risk of component failure as well as extend on-wing component life by avoiding unnecessary maintenance actions.

A methodology for long range prediction of air transportation

NASA Technical Reports Server (NTRS)

Ayati, M. B.; English, J. M.

1980-01-01

The paper describes the methodology for long-time projection of aircraft fuel requirements. A new concept of social and economic factors for future aviation industry which provides an estimate of predicted fuel usage is presented; it includes air traffic forecasts and lead times for producing new engines and aircraft types. An air transportation model is then developed in terms of an abstracted set of variables which represent the entire aircraft industry on a macroscale. This model was evaluated by testing the required output variables from a model based on historical data over the past decades.

Knowledge Repository for Fmea Related Knowledge

NASA Astrophysics Data System (ADS)

Cândea, Gabriela Simona; Kifor, Claudiu Vasile; Cândea, Ciprian

2014-11-01

This paper presents innovative usage of knowledge system into Failure Mode and Effects Analysis (FMEA) process using the ontology to represent the knowledge. Knowledge system is built to serve multi-projects work that nowadays are in place in any manufacturing or services provider, and knowledge must be retained and reused at the company level and not only at project level. The system is following the FMEA methodology and the validation of the concept is compliant with the automotive industry standards published by Automotive Industry Action Group, and not only. Collaboration is assured trough web-based GUI that supports multiple users access at any time

Coarse particle (PM10-2.5) source profiles for emissions from domestic cooking and industrial process in Central India.

PubMed

Bano, Shahina; Pervez, Shamsh; Chow, Judith C; Matawle, Jeevan Lal; Watson, John G; Sahu, Rakesh Kumar; Srivastava, Anjali; Tiwari, Suresh; Pervez, Yasmeen Fatima; Deb, Manas Kanti

2018-06-15

To develop coarse particle (PM 10-2.5 , 2.5 to 10μm) chemical source profiles, real-world source sampling from four domestic cooking and seven industrial processing facilities were carried out in "Raipur-Bhilai" of Central India. Collected samples were analysed for 32 chemical species including 21 elements (Al, As, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, Pb, S, Sb, Se, V, and Zn) by atomic absorption spectrophotometry (AAS), 8 water-soluble ions (Na + , K + , Mg 2+ , Ca 2+ , Cl - , F - , NO 3 - , and SO 4 2- ) by ion chromatography, ammonium (NH 4 + ) by spectrophotometry, and carbonaceous fractions (OC and EC) by thermal/optical transmittance. The carbonaceous fractions were most abundant fraction in household fuel and municipal solid waste combustion emissions while elemental species were more abundant in industrial emissions. Most of the elemental species were enriched in PM 2.5 (<2.5μm) size fraction as compared to the PM 10-2.5 fraction. Abundant Ca (13-28%) was found in steel-rolling mill (SRM) and cement production industry (CPI) emissions, with abundant Fe (14-32%) in ferro-manganese (FEMNI), steel production industry (SPI), and electric-arc welding emissions. High coefficients of divergence (COD) values (0.46 to 0.88) among the profiles indicate their differences. These region-specific source profiles are more relevant to source apportionment studies in India than profiles measured elsewhere. Copyright © 2018. Published by Elsevier B.V.

A pursuit of lineage-specific and niche-specific proteome features in the world of archaea

PubMed Central

2012-01-01

Background Archaea evoke interest among researchers for two enigmatic characteristics –a combination of bacterial and eukaryotic components in their molecular architectures and an enormous diversity in their life-style and metabolic capabilities. Despite considerable research efforts, lineage- specific/niche-specific molecular features of the whole archaeal world are yet to be fully unveiled. The study offers the first large-scale in silico proteome analysis of all archaeal species of known genome sequences with a special emphasis on methanogenic and sulphur-metabolising archaea. Results Overall amino acid usage in archaea is dominated by GC-bias. But the environmental factors like oxygen requirement or thermal adaptation seem to play important roles in selection of residues with no GC-bias at the codon level. All methanogens, irrespective of their thermal/salt adaptation, show higher usage of Cys and have relatively acidic proteomes, while the proteomes of sulphur-metabolisers have higher aromaticity and more positive charges. Despite of exhibiting thermophilic life-style, korarchaeota possesses an acidic proteome. Among the distinct trends prevailing in COGs (Cluster of Orthologous Groups of proteins) distribution profiles, crenarchaeal organisms display higher intra-order variations in COGs repertoire, especially in the metabolic ones, as compared to euryarchaea. All methanogens are characterised by a presence of 22 exclusive COGs. Conclusions Divergences in amino acid usage, aromaticity/charge profiles and COG repertoire among methanogens and sulphur-metabolisers, aerobic and anaerobic archaea or korarchaeota and nanoarchaeota, as elucidated in the present study, point towards the presence of distinct molecular strategies for niche specialization in the archaeal world. PMID:22691113

A pursuit of lineage-specific and niche-specific proteome features in the world of archaea.

PubMed

Roy Chowdhury, Anindya; Dutta, Chitra

2012-06-12

Archaea evoke interest among researchers for two enigmatic characteristics -a combination of bacterial and eukaryotic components in their molecular architectures and an enormous diversity in their life-style and metabolic capabilities. Despite considerable research efforts, lineage- specific/niche-specific molecular features of the whole archaeal world are yet to be fully unveiled. The study offers the first large-scale in silico proteome analysis of all archaeal species of known genome sequences with a special emphasis on methanogenic and sulphur-metabolising archaea. Overall amino acid usage in archaea is dominated by GC-bias. But the environmental factors like oxygen requirement or thermal adaptation seem to play important roles in selection of residues with no GC-bias at the codon level. All methanogens, irrespective of their thermal/salt adaptation, show higher usage of Cys and have relatively acidic proteomes, while the proteomes of sulphur-metabolisers have higher aromaticity and more positive charges. Despite of exhibiting thermophilic life-style, korarchaeota possesses an acidic proteome. Among the distinct trends prevailing in COGs (Cluster of Orthologous Groups of proteins) distribution profiles, crenarchaeal organisms display higher intra-order variations in COGs repertoire, especially in the metabolic ones, as compared to euryarchaea. All methanogens are characterised by a presence of 22 exclusive COGs. Divergences in amino acid usage, aromaticity/charge profiles and COG repertoire among methanogens and sulphur-metabolisers, aerobic and anaerobic archaea or korarchaeota and nanoarchaeota, as elucidated in the present study, point towards the presence of distinct molecular strategies for niche specialization in the archaeal world.

Profiles of Material Supplier Industries to the Automotive Manufacturers

DOT National Transportation Integrated Search

1981-07-01

This report presents a study of industries supplying materials to the automobile manufacturers. As the automobile industry restructures itself to produce more fuel-efficient vehicles, many of the industries that depend on the automobile will be force...

Multi-focus beam shaping of high power multimode lasers

NASA Astrophysics Data System (ADS)

Laskin, Alexander; Volpp, Joerg; Laskin, Vadim; Ostrun, Aleksei

2017-08-01

Beam shaping of powerful multimode fiber lasers, fiber-coupled solid-state and diode lasers is of great importance for improvements of industrial laser applications. Welding, cladding with millimetre scale working spots benefit from "inverseGauss" intensity profiles; performance of thick metal sheet cutting, deep penetration welding can be enhanced when distributing the laser energy along the optical axis as more efficient usage of laser energy, higher edge quality and reduction of the heat affected zone can be achieved. Building of beam shaping optics for multimode lasers encounters physical limitations due to the low beam spatial coherence of multimode fiber-coupled lasers resulting in big Beam Parameter Products (BPP) or M² values. The laser radiation emerging from a multimode fiber presents a mixture of wavefronts. The fiber end can be considered as a light source which optical properties are intermediate between a Lambertian source and a single mode laser beam. Imaging of the fiber end, using a collimator and a focusing objective, is a robust and widely used beam delivery approach. Beam shaping solutions are suggested in form of optics combining fiber end imaging and geometrical separation of focused spots either perpendicular to or along the optical axis. Thus, energy of high power lasers is distributed among multiple foci. In order to provide reliable operation with multi-kW lasers and avoid damages the optics are designed as refractive elements with smooth optical surfaces. The paper presents descriptions of multi-focus optics as well as examples of intensity profile measurements of beam caustics and application results.

Proposed industrial recovered materials utilization targets for the metals and metal-products industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1979-05-01

The introductory chapter provides a discussion of the factors that affect the recovery and reuse of secondary materials and the competition between the primary and secondary metals industries. It discusses these industries in terms of resource characteristics, industry technology, pollution control requirements, market structure, the economics of recycling, and the issues involved in econometrically estimating scrap supply response behavior. It further presents the methodology established by DOE for the metals, textiles, rubber, and pulp and paper industries. The areas in which government policies might have a significant impact on the utilization of primary and secondary metals and on any recyclingmore » targets between now and 1987 are noted. Chapter 3 presents general profiles for the major industrial segments comprising SIC 33. The profiles include such topics as industry structure, process technology, materials and recycling flow, and future trends. Chapter 4 specifically covers the evaluation of recycling targets for the ferrous, aluminum, copper, zinc, and lead industries. (MCW)« less

Industrial Location Research Studies: Reports 17-25.

ERIC Educational Resources Information Center

Fantus Co., Inc., New York, NY.

Nine industrial-location research studies of the Appalachian region are presented in this document. These studies relate to the casting, plastic, metal, and food industries. Each study devotes sections to (1) a profile of the industry, (2) the industry's prospects for growth, (3) technology and trends, (4) primary factors influencing selection of…

Linking of Microorganisms to Phenanthrene Metabolism in Soil by Analysis of 13C-Labeled Cell Lipids

PubMed Central

Johnsen, Anders R.; Winding, Anne; Karlson, Ulrich; Roslev, Peter

2002-01-01

Phenanthrene-metabolizing soil microbial communities were characterized by examining mineralization of [14C]phenanthrene, by most-probable-number (MPN) counting, by 16S-23S spacer DNA analysis of the numerically dominant, culturable phenanthrene-degrading isolates, and by examining incorporation of [13C]phenanthrene-derived carbon into sterols and polar lipid fatty acids (PLFAs). An unpolluted agricultural soil, a roadside soil diffusely polluted with polycyclic aromatic hydrocarbons (PAHs), and two highly PAH-polluted soils from industrial sites were analyzed. Microbial phenanthrene degraders were not detected by MPN counting in the agricultural soil and the roadside soil. In the industrial soils, phenanthrene degraders constituted 0.04 and 3.6% of the total number of CFU. 16S-23S spacer DNA analysis followed by partial 16S DNA sequencing of representative isolates from one of the industrial soils showed that one-half of the isolates belonged to the genus Sphingomonas and the other half were closely related to an unclassified beta-proteobacterium. The 13C-PLFA profiles of the two industrial soils were relatively similar and resembled the profiles of phenanthrene-degrading Sphingomonas reference strains and unclassified beta-proteobacterium isolates but did not match the profiles of Pseudomonas, Mycobacterium, or Nocardia reference strains. The 13C-PLFA profiles of phenanthrene degraders in the agricultural soil and the roadside soil were different from each other and different from the profiles of the highly polluted industrial soils. Only in the roadside soil were 10me/12me18:0 PLFAs enriched in 13C, suggesting that actinomycetes metabolized phenanthrene in this soil. The 13C-PLFA profiles of the unpolluted agricultural soil did not resemble the profiles of any of the reference strains. In all of the soils investigated, no excess 13C was recovered in the 18:2ω6,9 PLFA, suggesting that fungi did not contribute significantly to assimilation of [13C]phenanthrene. PMID:12450834

Effect of organic matter to nitrogen ratio on membrane bioreactor performance.

PubMed

Hao, L; Liao, B Q

2015-01-01

Effect of chemical oxygen demand (COD) to nitrogen (COD:N) ratio in feed on the performance of aerobic membrane bioreactor (MBR) for treating a synthetic high-strength industrial waste water containing glucose was studied for over 370 days. The widely recommended nutrients ratio (COD:N:P = 100:5:1) is not necessary for aerobic biological industrial waste water treatment. An increased COD:N ratio from 100:5 to 100:2.5 and 100:1.8 had a limited impact on COD removal efficiency and further led to a significant improvement in membrane performance, a reduced sludge yield, and improved effluent quality in terms of residual nutrients. An increased COD:N ratio will benefit the industrial waste water treatment using MBRs by reducing membrane fouling and sludge yield, saving chemical costs, and reducing secondary pollution by nutrients addition. Optimization of nutrients usage should be conducted for specific industrial waste water streams.

Study of Manpower Requirements by Occupation for Alternative Technologies in the Energy-Related Industries, 1970-1990. Volumes I, IIA, and III.

ERIC Educational Resources Information Center

Gutmanis, Ivars; And Others

The report presents the methodology used by the National Planning Association (NPA), under contract to the Federal Energy Administration (FEA), to estimate direct labor usage coefficients in some sixty different occupational categories involved in construction, operation, and maintenance of energy facilities. Volume 1 presents direct labor usage…

Additive Manufacturing as a Sustainment Enabler: An Industry Perspective

DTIC Science & Technology

2016-12-01

30 years with early emphasis and continued usage primarily during design and manufacturing of new systems. However, AM recently received increased...of newly designed AM-produced com- ponents into planned modifications and upgrades is an additional post- production opportunity funded by... manufacturing technology applications to the post- production stage. Putting together the solution relies on technical data management, applica- tion

Lightweight panel study 2012: Perceptions and usage by North American wood products manufacturers

Treesearch

Urs Buehlmann; Matt Bumgardner; Karl D. Forth

2012-01-01

Lightweight panels (panels made of two thin panels on the outside and a lightweight material in the core) can offer enhanced performance, reduced material use, and new design opportunities over traditional types of panels. Opportunities exist for the adoption of lightweight panels by the secondary wood industry in North America, as 62 percent of respondents to a recent...

EduCloud: PaaS versus IaaS Cloud Usage for an Advanced Computer Science Course

ERIC Educational Resources Information Center

Vaquero, L. M.

2011-01-01

The cloud has become a widely used term in academia and the industry. Education has not remained unaware of this trend, and several educational solutions based on cloud technologies are already in place, especially for software as a service cloud. However, an evaluation of the educational potential of infrastructure and platform clouds has not…

Preliminary evaluation of storax and its constituents: Fungal decay mold and termite resistance

Treesearch

S. Nami Kartal; Evren Terzi; Tsuyoshi Yoshimura; Rachel Arango; Carol A. Clausen; Frederick Green III

2012-01-01

Essential oils and their derivatives might be one of the promising preserving agents to prevent funga ldecay and termite/insect attack in wood since such compounds have a long history of safe usage as antimicrobial agents in various industries. Considerable research has focused on utilizing bioactive essential oils and wood extractives based on green technologies to...

Dissolved Oxygen management in catfish ponds using electric paddlewheel aerators: new approaches with old technology

USDA-ARS?s Scientific Manuscript database

The electric paddlewheel aerator has been the main aerator used in the U.S. catfish industry for the post forty years. While it has its limitations, it is perhaps the most efficient shallow-water aerator yet to be developed. Its shortcomings result not so much from poor design, as from poor usage. U...

Potential of the Cogex Software Platform to Replace Logbooks in Capstone Design Projects

ERIC Educational Resources Information Center

Foley, David; Charron, François; Plante, Jean-Sébastien

2018-01-01

Recent technologies are offering the power to share and grow knowledge and ideas in unprecedented ways. The CogEx software platform was developed to take advantage of the digital world with innovative ideas to support designers work in both industrial and academic contexts. This paper presents a qualitative study on the usage of CogEx during…

Why Do Higher-Education Costs Rise More Rapidly than Prices in General?

ERIC Educational Resources Information Center

Archibald, Robert B.; Feldman, David H.

2008-01-01

Why do costs in higher education rise more rapidly than prices in general? They do so due to four factors: (1) higher education is a personal-service industry; (2) higher education relies on highly educated labor; (3) because of increased capital usage (in the form of the new technologies), higher education's reliance on highly educated labor has…

Evaluation of a New Lipase from Staphylococcus sp. for Detergent Additive Capability

PubMed Central

Chauhan, Mamta; Chauhan, Rajinder Singh; Garlapati, Vijay Kumar

2013-01-01

Lipases are the enzymes of choice for laundry detergent industries owing to their triglyceride removing ability from the soiled fabric which eventually reduces the usage of phosphate-based chemical cleansers in the detergent formulation. In the present study, a partially purified bacterial lipase from Staphylococcus arlettae JPBW-1 isolated from the rock salt mine has been assessed for its triglyceride removing ability by developing a presoak solution so as to use lipase as an additive in laundry detergent formulations. The effects of selected surfactants, commercial detergents, and oxidizing agents on lipase stability were studied in a preliminary evaluation for its further usage in the industrial environment. Partially purified lipase has shown good stability in presence of surfactants, commercial detergents, and oxidizing agents. Washing efficiency has been found to be enhanced while using lipase with 0.5% nonionic detergent than the anioinic detergent. The wash performance using 0.5% wheel with 40 U lipase at 40°C in 45 min results in maximum oil removal (62%) from the soiled cotton fabric. Hence, the present study opens the new era in enzyme-based detergent sector for formulation of chemical-free detergent using alkaline bacterial lipase. PMID:24106703

Evaluation of a new lipase from Staphylococcus sp. for detergent additive capability.

PubMed

Chauhan, Mamta; Chauhan, Rajinder Singh; Garlapati, Vijay Kumar

2013-01-01

Lipases are the enzymes of choice for laundry detergent industries owing to their triglyceride removing ability from the soiled fabric which eventually reduces the usage of phosphate-based chemical cleansers in the detergent formulation. In the present study, a partially purified bacterial lipase from Staphylococcus arlettae JPBW-1 isolated from the rock salt mine has been assessed for its triglyceride removing ability by developing a presoak solution so as to use lipase as an additive in laundry detergent formulations. The effects of selected surfactants, commercial detergents, and oxidizing agents on lipase stability were studied in a preliminary evaluation for its further usage in the industrial environment. Partially purified lipase has shown good stability in presence of surfactants, commercial detergents, and oxidizing agents. Washing efficiency has been found to be enhanced while using lipase with 0.5% nonionic detergent than the anioinic detergent. The wash performance using 0.5% wheel with 40 U lipase at 40°C in 45 min results in maximum oil removal (62%) from the soiled cotton fabric. Hence, the present study opens the new era in enzyme-based detergent sector for formulation of chemical-free detergent using alkaline bacterial lipase.

Analysis of Wear Behavior of Graphene OXIDE — Polyamide Gears for Engineering Applications

NASA Astrophysics Data System (ADS)

Rajamani, Geetha; Paulraj, Jawahar; Krishnan, Kanny

Recent advances in polymer nanocomposites open a wide range of applications in various industrial sectors. Due to their high potential properties, these materials are replacing the usage of metals for many heavier components in automobile industries. In this experimental work, the tribological performance of Graphene oxide (GO) — Polyamide is investigated against pristine polyamide by fabricating gears for the usage in engineering applications. A gear test rig was developed in-house for analysis to study the specific wear rate and temperature gradient at different conditions of load and speeds. The wear resistance of the polyamide gears with the addition of 0.03wt.% of graphene oxide is better than the pristine polyamide gears and the specific wear rate is reduced significantly. The reduced specific wear rate of these polymer nanocomposite gears is attributed to the superior properties of graphene oxide such as High specific surface area, good adhesion properties and enhanced glass transition temperatures. The GO nanocomposite gear seems to be a potential alternative against conventional gears for engineering applications. Finally, the wear mechanisms and the potential of GO-based polyamide nanocomposite gears were proposed tentatively in the development of transmission gears for engineering applications.

High precision laser processing of sensitive materials by Microjet

NASA Astrophysics Data System (ADS)

Sibailly, Ochelio D.; Wagner, Frank R.; Mayor, Laetitia; Richerzhagen, Bernold

2003-11-01

Material laser cutting is well known and widely used in industrial processes, including micro fabrication. An increasing number of applications require nevertheless a superior machining quality than can be achieved using this method. A possibility to increase the cut quality is to opt for the water-jet guided laser technology. In this technique the laser is conducted to the work piece by total internal reflection in a thin stable water-jet, comparable to the core of an optical fiber. The water jet guided laser technique was developed originally in order to reduce the heat damaged zone near the cut, but in fact many other advantages were observed due to the usage of a water-jet instead of an assist gas stream applied in conventional laser cutting. In brief, the advantages are three-fold: the absence of divergence due to light guiding, the efficient melt expulsion, and optimum work piece cooling. In this presentation we will give an overview on several industrial applications of the water-jet guided laser technique. These applications range from the cutting of CBN or ferrite cores to the dicing of thin wafers and the manufacturing of stencils, each illustrates the important impact of the water-jet usage.

Optimization of a novel enzyme treatment process for early-stage processing of sheepskins.

PubMed

Lim, Y F; Bronlund, J E; Allsop, T F; Shilton, A N; Edmonds, R L

2010-01-01

An enzyme treatment process for early-stage processing of sheepskins has been previously reported by the Leather and Shoe Research Association of New Zealand (LASRA) as an alternative to current industry operations. The newly developed process had marked benefits over conventional processing in terms of a lowered energy usage (73%), processing time (47%) as well as water use (49%), but had been developed as a "proof of principle''. The objective of this work was to develop the process further to a stage ready for adoption by industry. Mass balancing was used to investigate potential modifications for the process based on the understanding developed from a detailed analysis of preliminary design trials. Results showed that a configuration utilising a 2 stage counter-current system for the washing stages and segregation and recycling of enzyme float prior to dilution in the neutralization stage was a significant improvement. Benefits over conventional processing include a reduction of residual TDS by 50% at the washing stages and 70% savings on water use overall. Benefits over the un-optimized LASRA process are reduction of solids in product after enzyme treatment and neutralization stages by 30%, additional water savings of 21%, as well as 10% savings of enzyme usage.

Reliable estimation of antimicrobial use and its evolution between 2010 and 2013 in French swine farms.

PubMed

Hémonic, Anne; Chauvin, Claire; Delzescaux, Didier; Verliat, Fabien; Corrégé, Isabelle

2018-01-01

There has been a strong implication of both the French swine industry and the national authorities on reducing the use of antimicrobials in swine production since 2010. The annual monitoring of antimicrobial sales by the French Veterinary Medicines Agency (Anses-ANMV) provides estimates but not detailed figures on actual on-farm usage of antimicrobials in swine production. In order to provide detailed information on the 2010 and 2013 antimicrobial use in the French swine industry, the methodology of cross-sectional retrospective study on a representative sample of at least 150 farms has been elected. The analysis of the collected data shows a strong and significant decrease in antimicrobial exposure of pigs between 2010 and 2013. Over three years, the average number of days of treatment significantly decreased by 29% in suckling piglets and by 19% in weaned piglets. In fattening pigs, the drop (- 29%) was not statistically significant. Only usage in sows did increase over that period (+ 17%, non-significant), which might be associated with the transition to group-housing of pregnant sows that took place at the time. Also, over that period, the use of third- and fourth generation cephalosporins in suckling piglets decreased by 89%, and by 82% in sows, which confirms that the voluntary moratorium on these classes of antimicrobials decided at the end of 2010 has been effectively implemented. The methodology of random sampling of farms appears as a precise and robust tool to monitor antimicrobial use within a production animal species, able to fulfil industry and national authorities' objectives and requirements to assess the outcome of concerted efforts on antimicrobial use reduction. It demonstrates that the use of antimicrobials decreased in the French swine industry between 2010 and 2013, including the classes considered as critical for human medicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Janjusic, Tommy; Kartsaklis, Christos

Application analysis is facilitated through a number of program profiling tools. The tools vary in their complexity, ease of deployment, design, and profiling detail. Specifically, understand- ing, analyzing, and optimizing is of particular importance for scientific applications where minor changes in code paths and data-structure layout can have profound effects. Understanding how intricate data-structures are accessed and how a given memory system responds is a complex task. In this paper we describe a trace profiling tool, Glprof, specifically aimed to lessen the burden of the programmer to pin-point heavily involved data-structures during an application's run-time, and understand data-structure run-time usage.more » Moreover, we showcase the tool's modularity using additional cache simulation components. We elaborate on the tool's design, and features. Finally we demonstrate the application of our tool in the context of Spec bench- marks using the Glprof profiler and two concurrently running cache simulators, PPC440 and AMD Interlagos.« less

Initial Validation of the Usage Rating Profile-Assessment for Use within German Language Schools

ERIC Educational Resources Information Center

Briesch, Amy M.; Casale, Gino; Grosche, Michael; Volpe, Robert J.; Hennemann, Thomas

2017-01-01

Modern attempts to explain why some assessment tools are readily adopted by school-based personnel whereas others are not have focused on the concept of usability. Usability encompasses not only the degree to which consumers find an assessment tool to be acceptable, but also the degree to which it is well-understood, believed to be feasible,…

African Language Resource Handbook: A Resource Handbook of the Eighty-two Highest Priority African Languages. Prepublication Edition.

ERIC Educational Resources Information Center

Dwyer, David J.; Yankee, Everyl

A directory of the 82 African languages given high priority for instruction in the United States contains a profile for each language that includes its classification and where it is spoken, the number of speakers, dialect situation, usage, orthography status, and listings of related human and institutional resources for the purpose of…

An Up-to-Date Look at the Supply of Child Care.

ERIC Educational Resources Information Center

Neugebauer, Roger

1992-01-01

Cites recently completed child care supply and demand studies showing 400 percent growth rate in center care in past two decades, with more children enrolled in centers than in any other form of nonparental child care. Data on trends, usage by age, forms of care used, types of centers used, and a profile of centers are provided in tables. (LB)

Rhodotorula glutinis-potential source of lipids, carotenoids, and enzymes for use in industries.

PubMed

Kot, Anna M; Błażejak, Stanisław; Kurcz, Agnieszka; Gientka, Iwona; Kieliszek, Marek

2016-07-01

Rhodotorula glutinis is capable of synthesizing numerous valuable compounds with a wide industrial usage. Biomass of this yeast constitutes sources of microbiological oils, and the whole pool of fatty acids is dominated by oleic, linoleic, and palmitic acid. Due to its composition, the lipids may be useful as a source for the production of the so-called third-generation biodiesel. These yeasts are also capable of synthesizing carotenoids such as β-carotene, torulene, and torularhodin. Due to their health-promoting characteristics, carotenoids are commonly used in the cosmetic, pharmaceutical, and food industries. They are also used as additives in fodders for livestock, fish, and crustaceans. A significant characteristic of R. glutinis is its capability to produce numerous enzymes, in particular, phenylalanine ammonia lyase (PAL). This enzyme is used in the food industry in the production of L-phenylalanine that constitutes the substrate for the synthesis of aspartame-a sweetener commonly used in the food industry.

Quantifying the environmental impact of an integrated human/industrial-natural system using life cycle assessment; a case study on a forest and wood processing chain.

PubMed

Schaubroeck, Thomas; Alvarenga, Rodrigo A F; Verheyen, Kris; Muys, Bart; Dewulf, Jo

2013-01-01

Life Cycle Assessment (LCA) is a tool to assess the environmental sustainability of a product; it quantifies the environmental impact of a product's life cycle. In conventional LCAs, the boundaries of a product's life cycle are limited to the human/industrial system, the technosphere. Ecosystems, which provide resources to and take up emissions from the technosphere, are not included in those boundaries. However, similar to the technosphere, ecosystems also have an impact on their (surrounding) environment through their resource usage (e.g., nutrients) and emissions (e.g., CH4). We therefore propose a LCA framework to assess the impact of integrated Techno-Ecological Systems (TES), comprising relevant ecosystems and the technosphere. In our framework, ecosystems are accounted for in the same manner as technosphere compartments. Also, the remediating effect of uptake of pollutants, an ecosystem service, is considered. A case study was performed on a TES of sawn timber production encompassing wood growth in an intensively managed forest ecosystem and further industrial processing. Results show that the managed forest accounted for almost all resource usage and biodiversity loss through land occupation but also for a remediating effect on human health, mostly via capture of airborne fine particles. These findings illustrate the potential relevance of including ecosystems in the product's life cycle of a LCA, though further research is needed to better quantify the environmental impact of TES.

The usage, occurrence and dietary intakes of white mineral oils and waxes in Europe.

PubMed

Tennant, D R

2004-03-01

Dietary exposures to mineral hydrocarbons were estimated from information about patterns of usage, concentrations in foods and quantities of foods consumed. An industry survey showed that the largest usage of food-grade white mineral oils was in plastics manufacture although the majority are used in non-food applications. The largest volumes of wax usage were in packaging. Conservative estimates indicated that daily intakes of white mineral oils ranged from 0.39 to 0.91 mg/kg bw/day for adults and from 0.75 to 1.77 mg/kg bw/day for children (mean and 97.5th percentiles). Total wax intakes ranged from 0.08 to 0.19 mg/kg bw/day for adults and 0.23 to 0.64 mg/kg bw/day for pre-school children. When usage factors were applied, estimates of chronic intakes of white oils were reduced to 0.09-0.20 mg/kg bw/day for adults and to 0.17-0.39 mg/kg bw/day for children. Total wax intakes were reduced to 0.01-0.02 mg/kg bw/day for adults and to 0.02-0.06 mg/kg bw/day for children. For white mineral oils the principal source of exposure for most consumers was imported de-dusted grain. The principal source of potential wax exposure was from glazing agents on confectionery. There was no evidence of intakes exceeding SCF ADIs for microcrystalline waxes or certain white mineral oils and levels of exposure were similar to those of naturally-occurring mineral hydrocarbons in foods.

Occurrence of PBDEs and other alternative brominated flame retardants in sludge from wastewater treatment plants in Korea.

PubMed

Lee, Sunggyu; Song, Geum-Ju; Kannan, Kurunthachalam; Moon, Hyo-Bang

2014-02-01

Studies on the occurrence of polybrominated diphenyl ethers (PBDEs) and other alternative brominated flame retardants in the environment are scarce. In this study, PBDEs and non-PBDE brominated flame retardants (NBFRs), including decabromodiphenyl ethane (DBDPE) and 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), were measured in sludge collected from three types of wastewater treatment plants (WWTPs) in Korea. Total concentrations of PBDEs (∑PBDE) in sludge ranged from 298 to 48,000 (mean: 3240) ng/g dry weight. Among 10 NBFRs analyzed, DBDPE and BTBPE were the only ones detected in sludge samples. Concentrations of DBDPE and BTBPE ranged from 1) of DBDPE/BDE 209 were found in sludge from I-WWTPs, reflecting a shift in the usage pattern of BFRs by the Korean industry. The nationwide annual emission fluxes of ∑PBDE, DBDPE and BTBPE via WWTPs to the environment were estimated to be 7400, 480, and 3.7 kg/year, respectively. This is the first study on the occurrence of alternative brominated flame retardants in sludge from Korea. © 2013 Elsevier B.V. All rights reserved.

End-of-life flows of multiple cycle consumer products.

PubMed

Tsiliyannis, C A

2011-11-01

Explicit expressions for the end-of-life flows (EOL) of single and multiple cycle products (MCPs) are presented, including deterministic and stochastic EOL exit. The expressions are given in terms of the physical parameters (maximum lifetime, T, annual cycling frequency, f, number of cycles, N, and early discard or usage loss). EOL flows are also obtained for hi-tech products, which are rapidly renewed and thus may not attain steady state (e.g., electronic products, passenger cars). A ten-step recursive procedure for obtaining the dynamic EOL flow evolution is proposed. Applications of the EOL expressions and the ten-step procedure are given for electric household appliances, industrial machinery, tyres, vehicles and buildings, both for deterministic and stochastic EOL exit, (normal, Weibull and uniform exit distributions). The effect of the physical parameters and the stochastic characteristics on the EOL flow is investigated in the examples: it is shown that the EOL flow profile is determined primarily by the early discard dynamics; it also depends strongly on longevity and cycling frequency: higher lifetime or early discard/loss imply lower dynamic and steady state EOL flows. The stochastic exit shapes the overall EOL dynamic profile: Under symmetric EOL exit distribution, as the variance of the distribution increases (uniform to normal to deterministic) the initial EOL flow rise becomes steeper but the steady state or maximum EOL flow level is lower. The steepest EOL flow profile, featuring the highest steady state or maximum level, as well, corresponds to skew, earlier shifted EOL exit (e.g., Weibull). Since the EOL flow of returned products consists the sink of the reuse/remanufacturing cycle (sink to recycle) the results may be used in closed loop product lifecycle management operations for scheduling and sizing reverse manufacturing and for planning recycle logistics. Decoupling and quantification of both the full age EOL and of the early discard flows is useful, the latter being the target of enacted legislation aiming at increasing reuse. Copyright © 2011 Elsevier Ltd. All rights reserved.

New Technology Industries. Skills Task Force Research Paper 10.

ERIC Educational Resources Information Center

Hendry, Chris

This paper provides an overview of the growth of new technology industries in Great Britain and the skills needed for these industries. The industries are advanced materials, biotechnology, and opto-electronics. The report profiles the current status, expected growth, and skills needed for each of these industry sectors. It also points out the…

Seals Flow Code Development 1993

NASA Technical Reports Server (NTRS)

Liang, Anita D. (Compiler); Hendricks, Robert C. (Compiler)

1994-01-01

Seals Workshop of 1993 code releases include SPIRALI for spiral grooved cylindrical and face seal configurations; IFACE for face seals with pockets, steps, tapers, turbulence, and cavitation; GFACE for gas face seals with 'lift pad' configurations; and SCISEAL, a CFD code for research and design of seals of cylindrical configuration. GUI (graphical user interface) and code usage was discussed with hands on usage of the codes, discussions, comparisons, and industry feedback. Other highlights for the Seals Workshop-93 include environmental and customer driven seal requirements; 'what's coming'; and brush seal developments including flow visualization, numerical analysis, bench testing, T-700 engine testing, tribological pairing and ceramic configurations, and cryogenic and hot gas facility brush seal results. Also discussed are seals for hypersonic engines and dynamic results for spiral groove and smooth annular seals.

Greenhouse gas and carbon profile of the U.S. forest products industry value chain

Treesearch

Linda S. Heath; Van Maltby; Reid Miner; Kenneth E. Skog; James E. Smith; Jay Unwin; Brad Upton

2010-01-01

A greenhouse gas and carbon accounting profile was developed for the U.S. forest products industry value chain for 1990 and 2004-2005 by examining net atmospheric fluxes of CO2 and other greenhouse gases (GHGs) using a variety of methods and data sources. Major GHG emission sources include direct and indirect (from purchased electricity...

Changing Occupational Profiles in the Hotel Industry: Case Studies in France, Italy and Spain. Synthesis Report.

ERIC Educational Resources Information Center

Gatti, Mario; Grazia Mereu, Maria; Tagliaferro, Claudio

Changing occupational profiles in the hotel industry in France, Italy, and Spain were examined in case studies that included interviews with hotel managers, human resource managers, and individuals employed in hotel occupations identified as new or entailing new skills. The study focused on the following topics: (1) changes in the hotel industry…

Electricity Production and Characterization of High-Strength Industrial Wastewaters in Microbial Fuel Cell.

PubMed

Cetinkaya, Afsin Y; Ozdemir, Oguz Kaan; Demir, Ahmet; Ozkaya, Bestami

2017-06-01

Microbial fuel cells (MFCs) convert electrochemical energy into electrical energy immediately and have a big potential usage for the same time wastewater treatment and energy recovery via electro-active microorganisms. However, MFCs must be efficiently optimized due to its limitations such as high cost and low power production. Finding new materials to increase the cell performance and reduce cost for MFC anodes is mandatory. In the first step of this study, different inoculation sludges such as anaerobic gum industry wastewater, anaerobic brewery wastewater and anaerobic phosphate were tested, and MFC that was set up with anaerobic gum industry wastewater inoculation sludge exhibited the highest performance. In the second step of this study, various wastewaters such as chocolate industry, gum industry and slaughterhouse industry were investigated for anode bacteria sources. Several electrochemical techniques have been employed to elucidate how wastewaters affect the MFCs' performance. Among all the mentioned wastewaters, the best performance was achieved by the MFCs fed with slaughterhouse wastewater; this device produced a maximum power density of 267 mW·m -2 .

Liquefied Petroleum Gas Industry Profile. Volume l. An Overview of the Industry.

DOT National Transportation Integrated Search

1985-11-01

The report provides a broad, factual description of the U.S. liquefied petroleum gas (LP-gas) industry. The basic purpose of the report is to provide analysts and policymakers in government and industry with a comprehensive overview of the LP-gas ind...

Truck Drivers' Use of the Internet: A Mobile Health Lifeline.

PubMed

Heaton, Karen; Combs, Bryan; Griffin, Russell

2017-06-01

Because of their social isolation, irregular and unpredictable schedules, limited access to health care, and long periods of travel, long-haul truckers may benefit from the use of mobile health applications on Internet-capable devices. The purpose of this study was to determine Internet access and usage among a sample of long-haul truck drivers. In this cross-sectional study, truck drivers completed a pencil and paper survey with questions on demographics, work and health histories, and Internet access and usage for both personal and job reasons. A total of 106 truck drivers were recruited from trucking industry trade shows, by word of mouth, and directly from trucking companies. Overall, the truck drivers' use of the Internet was limited. Their usage for personal and job-related reasons differed. Social connectivity and access to health and wellness information were important during personal usage time. Job-related Internet use was highly practical, and applied to seeking information for directions and maps, fuel stops and pricing, and communicating with employers or transmitting documents. Age and experience were associated with Internet use. Younger, less-experienced drivers used the Internet more than older, experienced drivers. Targeted mobile health messaging may be a useful tool to inform truck drivers of health conditions and plans, and may provide links to primary care providers needing to monitor or notify drivers of diagnostic results or treatment plans.

GLUE 2 deployment: Ensuring quality in the EGI/WLCG information system

NASA Astrophysics Data System (ADS)

Burke, Stephen; Alandes Pradillo, Maria; Field, Laurence; Keeble, Oliver

2014-06-01

The GLUE 2 information model is now fully supported in the production EGI/WLCG information system. However, to make it usable and allow clients to rely on the published information it is important that the meaning is clearly defined, and that information providers and site configurations are validated to ensure as far as possible that what they publish is correct. In this paper we describe the definition of a detailed schema usage profile, the implementation of a software tool to validate published information according to the profile and the use of the tool in the production Grid, and also summarise the overall state of GLUE 2 deployment.

Partial replacement of pork back-fat by vegetable oils in burger patties: effect on oxidative stability and texture and color changes during cooking and chilled storage.

PubMed

Rodríguez-Carpena, J G; Morcuende, D; Estévez, M

2011-09-01

The present study was aimed to examine the impact of partial back-fat replacement (50%) by avocado (A), sunflower (S), and olive (O) oil on the chemical composition, oxidative stability, color, and texture of porcine burger patties (10% fat) subjected to oven cooking (170 °C/18 min) and chilling (+ 4 °C/15 d). The addition of vegetable oils caused a significant reduction of saturated fatty acids and a concomitant enrichment in unsaturated fatty acids. The incorporation of vegetable oils to porcine patties caused a significant reduction of TBARS formed as a result of cooking and the subsequent chilling. The usage of vegetable oils as back-fat replacers had no impact on the formation of protein carbonyls. Porcine patties with A- and O-patties displayed a more favorable ratio between volatiles contributing to rancidity and those contributing pleasant odor notes. Treated and control patties underwent similar discoloration during processing. The usage of vegetable oils and particularly, avocado and olive oils, as back-fat replacers, could be an interesting strategy to improve the nutritional and technological properties of porcine patties. The present study highlights the potential nutritional and technological benefits of replacing animal fat by vegetable oils in porcine patties subjected to cooking and chilling. The industrial application of vegetable oils in processed meat products would meet the current consumers' interest towards healthier food products. In addition, the usage of avocado oil would contribute to boost the avocado industry by providing an additional value to a by-product of great biological significance. © 2011 Institute of Food Technologists®

Psychological markers underlying murder weapon profile: a quantitative study.

PubMed

Kamaluddin, M R; Othman, A; Ismail, K H; Mat Saat, G A

2017-12-01

The horrific nature of murder using different types of weapons has been an important focal point of many criminological studies. Weapons that are used in murders seem to play dominant roles in murder investigations as they may provide information leading to arrest. The established factors for weapon usage include environmental context, demography and availability of weapons. However, there is insufficient research attention on the psychological functioning of murderers for particular weapon usage. In light of this, the current study seeks to narrow this gap of information by identifying the influences of psychological traits on weapon usage among a sample of male murderers. The present cross-sectional study was conducted among 71 male murderers incarcerated in 11 prisons within Peninsular Malaysia. The selection of the sample was based on predetermined selection criteria using a purposive sampling method. A guided self-administered questionnaire comprising sociodemography variables and four Malay validated psychometric instruments: Zuckerman-Kuhlman Personality Questionnaire-40-Cross-Culture, Self-control Scale, "How I Think" Questionnaire and Aggression Questionnaire; was used. Independent sample t-test was performed to establish the mean score differences of psychological traits between the murderers who used single and multiple weapons while Kruskal-Wallis tests were carried out to ascertain the differences between the specific types of weapons used among the murderers. Following this, one-way ANOVA was carried out to ascertain the psychological trait differences among the murderers according to the different sources of weapon. Results indicated specific psychological traits influenced the number(s), source(s) and type(s) of weapon used in committing murder. The findings have implications for the psychological profiling of unknown murderers within the Malaysian context.

The Economic Effect of Education in an Information Technology-Penetrating Economy: Evidence from Hong Kong

ERIC Educational Resources Information Center

Chan, Chi Wai

2010-01-01

This article examines the economic effect of education in terms of its impact on the earnings of workers in an information technology (IT)-diffusing economy, based on data from Hong Kong's 2006 by-census and survey on the usage and penetration of IT in industries. Education enhances the productivity of workers and increases their lifetime incomes.…

Longshoring Industry

DTIC Science & Technology

2001-01-01

operator. (d) Prohibited usage. (1) Equipment shall not be used in a manner that exerts sideloading stresses upon the crane or derrick boom. (2) No crane ... hooks shall be latched or otherwise secured to prevent accidental load disengagement. (f) General. (1) Operating controls. (i) Crane and derrick...when the boom is supported on a dolly. The empty hook or other attachment shall be secured. (4) Unattended cranes . The following steps shall be taken

"Mind the Gap": An Empirical Study of the Gap between Intention and Actual Usage of Corporate E-Learning Programmes in the Financial Industry

ERIC Educational Resources Information Center

Luor, Tainyi; Hu, Changya; Lu, His-Peng

2009-01-01

While numerous previous studies have focused on the use of some corporate e-learning programmes (CELP), little is known about the difference between users' pre-installation reactions to CELP and user's post-installation reactions to CELP. This study narrows the above gap with two investigations into a financial company's CELP. In the…

Cornstalk as a source of fiber and energy

Treesearch

Aziz Ahmed; J. Y. Zhu

2006-01-01

Wood is the major source of fiber supply. Non-wood fibers are mainly used in papermaking where there is a lack of forest resource such as in China and India. Cornstalk, among the agricultural residues and other non-wood fiber, is the most promising source of fiber. However, The usage of cornstalks is very limited in pulp and paper industry, although nearly 284 million...

Computer Aided Process Planning of Machined Metal Parts

DTIC Science & Technology

1984-09-01

the manufac- turer to accentuate the positive to assist marketing . Machine usage costs and facility loadings are frequently critical. For example...Variant systems currently on the market include Multiplan (TM of OIR, Inc.), CY-Miplan (TM of Computervision), PICAPP (TM of PICAPP, Inc.) and CSD...Multiproduct, Multistage Manufacturing Systems, Journal of Engineering for Industry, ASME, August 1977. Hitomi, K. and I. Ham, Product Mix and Machine Loading

[Standardization of cryopreservation process of Saccharomyces boulardii yeasts for usage in collections and banks of industrial microorganism strains].

PubMed

Gurina, T M; Vysekantsev, I P; Babinets, O M

2013-01-01

New implementation principle of freeze-thawing during cryopreservation of microorganisms, initiation of the process of crystal formation at cooling and thawing stage with the controlled rate of heating was experimentally substantiated. This allows increasing the cell viability, guaranteeing their equal number in each preparation, decreasing the contamination risk of the samples at thawing stage.

Analysis of Non-Tactical Vehicle Utilization at Fort Carson Colorado

DTIC Science & Technology

2012-01-01

regenerative braking energy recovery. The mass of the vehicles monitored in this study was not known. However, some useful information may be... regenerative energy recovery potential for specific duty cycles was also quantified through a cumulative assessment of the number and severity of deceleration...extracted on usage time, distance, vehicle speed and geographic location in order to compare vehicle driving profiles. The regenerative energy recovery

Financially At-Risk College Students: An Exploratory Investigation of Student Loan Debt and Prioritization of Debt Repayment

ERIC Educational Resources Information Center

Pinto, Mary Beth; Mansfield, Phylis M.

2006-01-01

College students today face heavy student loan debt that is intensified by the amount of credit card debt they carry. This study provides a profile of financially at-risk students based on their credit card usage behavior. When compared to the non-financially at-risk students, those in the financially at-risk group were found to have higher…

Industry Profiles 1958-1966.

ERIC Educational Resources Information Center

Business and Defense Services Administration (DOC), Washington, DC.

A statistical picture is provided of economic developments in each of 417 manufacturing industries during the years 1958-66. The document consists of: (1) an introduction which describes the source and organization of the data and explains the terminology used, (2) industry descriptions which define each of the industries included, (3) industry…

Understanding BIM Adoption in the AEC Industry: The Case of Jordan

NASA Astrophysics Data System (ADS)

Btoush, M.; Haron, AT

2017-11-01

Building information modelling (BIM) is a new and powerful technology implemented by many countries. The construction industry in Jordan plays a vital role and contributes immensely to the economic growth and development. In order to boost the industry and the economy, many industry players including engineers and contractors have recommended the implementation of BIM in Jordan. However, research demonstrates that successful BIM implementation is possible through the awareness of the different levels of BIM, which is a basic precondition for BIM implementation. Without a clear understanding of BIM, many companies would be unable to fully achieve BIM potentials or implement BIM in their building lifecycle. The objective of this study is to assess the current awareness of BIM technology in the Jordanian construction industry. A field interviews were conducted and 15 responses were collected and. The findings indicate that a significant proportion of respondents have little or no understanding of the concept of BIM. Also, the usage was found to be very low. Based on the results, a holistic roadmap was developed to spread the BIM adoption through the Jordanian construction industry. It is expected that this roadmap would lead to a better understanding and enable the industry towards more extensive implementation of BIM.

A Survey on the Usage of Biomass Wastes from Palm Oil Mills on Sustainable Development of Oil Palm Plantations in Sarawak

NASA Astrophysics Data System (ADS)

Phang, K. Y.; Lau, S. W.

2017-06-01

As one of the world’s largest palm oil producers and exporters, Malaysia is committed to sustainable management of this industry to address the emerging environmental challenges. This descriptive study aims to evaluate the oil palm planters’ opinions regarding the usage of biomass wastes from palm oil mills and its impact on sustainable development of oil palm plantations in Sarawak. 253 planters across Sarawak were approached for their opinions about the usage of empty fruit bunch (EFB), palm oil mill effluent (POME), mesocarp fibre (MF), and palm kernel shell (PKS). This study revealed that the planters had generally higher agreement on the beneficial application of EFB and POME in oil palm plantations. This could be seen from the higher means of agreement rating of 3.64 - 4.22 for EFB and POME, compared with the rating of 3.19 - 3.41 for MF and PKS in the 5-point Likert scale (with 5 being the strongest agreement). Besides, 94.7 percent of the planters’ companies were found to comply with the Environmental Impact Assessment (EIA) requirements where nearly 38 percent carried out the EIA practice twice a year. Therefore high means of agreement were correlated to the compliance of environmental regulations, recording a Likert rating of 3.89 to 4.31. Lastly, the usage of EFB and POME also gained higher Likert scale point of 3.76 to 4.17 against MF and PKS of 3.34 to 3.49 in the evaluation of the impact of sustainability in oil palm plantations. The planters agreed that the usage of EFB and POME has reduced the environmental impact and improved the sustainable development, and its application has been improved and increased by research and development. However the planters were uncertain of the impact of usage of biomass wastes with respect to the contribution to social responsibility and company image in terms of transparency in waste management.

Groundwater protection vs. extractable soil resource usage - approaching the problem with GPR-survey

NASA Astrophysics Data System (ADS)

Kupila, J.

2012-04-01

Finland is fully self-sufficient in clean groundwater and even has a capacity of exportation: there are more than 6000 groundwater areas, a total yield of those is 5.4 million m3/day and only 10% of this is in use. Even so, nowadays the protection of groundwater has come more and more important. One of the reasons is effects of extractable soil resource usage, because the most valuable and remarkable resources of groundwater as well as sand and gravel aggregates appear in the same areas. Also in densely populated areas there is lack of aggregate products. Using the best available techniques and methods which take into account sustainable development, the outcomes of this protection vs. usage -dilemma will be beneficent. Ground penetrating radar (GPR) -survey is an efficient tool for examination of areas of groundwater and soil resources. Briefly, GPR is a geophysical method that uses radar pulses to image the subsurface. It uses electromagnetic radiation in the microwave band (UHF/VHF frequencies) of the radio spectrum and detects the reflected signals from subsurface structures. Usually groundwater and soil aggregates appear in areas where the structure of soil layers improves the efficiency of GPR , so an exact image of subsurface layers can be outlined. Also the conditions of groundwater can be interpreted from GPR-data. Results from GPR-survey can be effective in making guidelines for extractable soil resource usage to avoid risks and to address secured sites for both groundwater and soil usage. Geological Survey of Finland has executed many co-operated projects related to these kind of problems, for example in Kainuu area, eastern Finland, 20 areas were studied with over 30 kilometers of GPR-profile. Detailed information from these researches support local authorities and actors in land use planning in future and furthermore assure safe balance in groundwater and soil resource usage.

Geochemical characteristics of rare earth elements in different types of soil: A chemometric approach.

PubMed

Khan, Aysha Masood; Behkami, Shima; Yusoff, Ismail; Md Zain, Sharifuddin Bin; Bakar, Nor Kartini Abu; Bakar, Ahmad Farid Abu; Alias, Yatimah

2017-10-01

Rare earth elements (REEs) are becoming significant due to their huge applications in many industries, large-scale mining and refining activities. Increasing usage of such metals pose negative environmental impacts. In this research ICP-MS has been used to analyze soil samples collected from former ex-mining areas in the depths of 0-20 cm, 21-40 cm, and 41-60 cm of residential, mining, natural, and industrial areas of Perak. Principal component analysis (PCA) revealed that soil samples taken from different mining, industrial, residential, and natural areas are separated into four clusters. It was observed that REEs were abundant in most of the samples from mining areas. Concentration of the rare elements decrease in general as we move from surface soil to deeper soils. Copyright © 2017 Elsevier Ltd. All rights reserved.

Organogenic nodule formation in hop: a tool to study morphogenesis in plants with biotechnological and medicinal applications.

PubMed

Fortes, Ana M; Santos, Filipa; Pais, Maria S

2010-01-01

The usage of Humulus lupulus for brewing increased the demand for high-quality plant material. Simultaneously, hop has been used in traditional medicine and recently recognized with anticancer and anti-infective properties. Tissue culture techniques have been reported for a wide range of species, and open the prospect for propagation of disease-free, genetically uniform and massive amounts of plants in vitro. Moreover, the development of large-scale culture methods using bioreactors enables the industrial production of secondary metabolites. Reliable and efficient tissue culture protocol for shoot regeneration through organogenic nodule formation was established for hop. The present review describes the histological, and biochemical changes occurring during this morphogenic process, together with an analysis of transcriptional and metabolic profiles. We also discuss the existence of common molecular factors among three different morphogenic processes: organogenic nodules and somatic embryogenesis, which strictly speaking depend exclusively on intrinsic developmental reprogramming, and legume nitrogen-fixing root nodules, which arises in response to symbiosis. The review of the key factors that participate in hop nodule organogenesis and the comparison with other morphogenic processes may have merit as a study presenting recent advances in complex molecular networks occurring during morphogenesis and together, these provide a rich framework for biotechnology applications.

POLLUTION FROM PERSONAL ACTIONS, ACTIVITIES, AND ...

EPA Pesticide Factsheets

Perhaps more so than with any other class of anthropogenic chemicals, the occurrence of pharmaceuticals and personal care products (PPCPS) in the environment highlights the immediate, intimate, and inseparable connection between the personal activities of individual citizens and their environment. PPCPS, in contrast to other types of environmental contaminants, owe their origins in the environment directly to their worldwide, universal, frequent, highly dispersed, and individually small but cumulative usage by multitudes of individuals - as opposed to the larger, highly delineated, and more-controllable industrial manufacturing/usage of most high-volume synthetic chemicals. PPCPs are a diverse group of chemicals, used internally or externally with the bodies of humans and domestic animals (and agricultural plants), comprising a wide spectrum of chemical classes. In very general terms, PPCPs include: o- drugs (available by prescription or over-the-counter; including the new genre of

Generic ICT Skills Profiles: Future Skills for Tomorrow's World.

ERIC Educational Resources Information Center

International Co-operation Europe Ltd. (ICEL), Brussels, Belgium.

This document describes generic skills profiles relevant to key jobs in information and communications technology (ICT). The profiles cover the main job areas for which the ICT industry is experiencing skills shortages. These types of information are provided for 18 generic job profiles: job description (vision, role, lifestyle); examples of job…

Competency Profiles for Vocational Education. Final Report.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This document contains a brief report describing the development of validated competency profiles for business, home economics, and industrial education at the University of Missouri-Columbia, as well as a set of the profiles. The profiles are used to evaluate students' levels of mastery of competencies in the content areas of each course. Two…

Usage monitoring of electrical devices in a smart home.

PubMed

Rahimi, Saba; Chan, Adrian D C; Goubran, Rafik A

2011-01-01

Profiling the usage of electrical devices within a smart home can be used as a method for determining an occupant's activities of daily living. A nonintrusive load monitoring system monitors the electrical consumption at a single electrical source (e.g., main electric utility service entry) and the operating schedules of individual devices are determined by disaggregating the composite electrical consumption waveforms. An electrical device's load signature plays a key role in nonintrusive load monitoring systems. A load signature is the unique electrical behaviour of an individual device when it is in operation. This paper proposes a feature-based model, using the real power and reactive power as features for describing the load signatures of individual devices. Experimental results for single device recognition for 7 devices show that the proposed approach can achieve 100% classification accuracy with discriminant analysis using Mahalanobis distances.

Time trends of polybrominated diphenyl ethers in East China Seas: Response to the booming of PBDE pollution industry in China.

PubMed

Li, Yuanyuan; Lin, Tian; Hu, Limin; Feng, Jialiang; Guo, Zhigang

2016-01-01

The East China Seas (ECSs) are the receptors of the land-based persistent organic pollutants (POPs), such as polybrominated diphenyl ethers (PBDEs) mainly from China through atmospheric deposition driven by the East Asian winter monsoon and fluvial discharge (e.g., Yangtze River and Yellow River), making the offshore sediments to be a good proxy to reconstruct history of those pollutants in China. In this work, four well-placed sediment cores were extracted from the mud areas in the ECSs, and the (210)Pb-dated cores were analyzed to yield historical concentration profiles of PBDEs in the area. The results showed that there was a persistent increase from 1970s and almost no clear sign in the decline of PBDEs until recently in China. More importantly, there was a faster increase of PBDEs from 1990s in China; while this period was just shown as gradually leveling off or even declining trends in developed countries. The persistently increasing trend of PBDEs in China since 1990s could be largely due to the booming of the manufacturing industry and unexpectedly transfer of PBDE pollution from developed countries to China. Besides, the relative high concentrations and fluxes of PBDEs in the core from coastal ECS located near a well-known electrical/electronic waste (e-waste) recycling area suggests an important contribution of PBDE emissions from recycling centers of e-waste in China. Although efforts in environmental monitoring of PBDE contamination have been substantially increased over the last decade, China is still lagging behind in terms of nationwide regulation of PBDE usage and treatment of disposal PBDE-containing products. Copyright © 2016 Elsevier Ltd. All rights reserved.

Automatic control model of water filling system with Allen Bradley Micrologix 1400 PLC

NASA Astrophysics Data System (ADS)

Harahap, R.; Adyatma, AF; Fahmi, F.

2018-02-01

Programmable Logic Controller or PLC today plays an important role in most industrial control systems. PLC usage can be encountered in almost all fields of industry, not only in the manufacturing world but also on many other things such as elevators in office buildings, hotels hospitals, and others. PLC is an electronic control tool that operates in logic that its programming can be modified with relative ease. As with any controller in general, the PLC processes input signals to further discharge output according to the desired program. PLC usage is very broad because of its high reliability, can be reprogrammed or modified with relative ease, and very helpful in the tracking troubleshooting. One type of existing PLC is Allen Bradley PLC. Allen Bradley PLC program is commonly used in various industries. PLC Allen Bradley (AB) has several types, and one of them is the type of Micrologic 1400. In this study we design a system as a comparison with the conventional system. For that to explore the use of a PLC program which will be supported by a simulator tool, including a program to RSLogic 500, how to programming, monitoring via RSView32, and modification. It is expected to understand the application aspect of operation and programming of this specific PLC and its potential. The purpose of this research is to design water filling automation system by using Allen Bradley Micrologic 1400 type 1766-L32BXB PLC, empowering the use of Allen Bradley Micrologic 1400 PLC and to regulate the desired process to obtain efficiency and effectiveness compared with conventional system arrangement using Relay.

Nanoparticle usage and protection measures in the manufacturing industry--a representative survey.

PubMed

Schmid, Kaspar; Danuser, Brigitta; Riediker, Michael

2010-04-01

Addressing the risks of nanoparticles requires knowledge about release into the environment and occupational exposure. However, such information currently is not systematically collected; therefore, this risk assessment lacks quantitative data. The goal was to evaluate the current level of nanoparticle usage in Swiss industry as well as health, safety, and environmental measures, and the number of potentially exposed workers. A representative, stratified mail survey was conducted among 1626 clients of the Swiss National Accident Insurance Fund (SUVA), which insures 80,000 manufacturing firms, representing 84% of all Swiss manufacturing companies (947 companies answered the survey for a 58.3% response rate). The extrapolation to all Swiss manufacturing companies results in 1309 workers (95% confidence interval [CI]: 1073 to 1545) potentially exposed to nanoparticles in 586 companies (95% CI: 145 to 1027). This corresponds to 0.08% of workers (95% CI: 0.06% to 0.09%) and to 0.6% of companies (95% CI: 0.2% to 1.1%). The industrial chemistry sector showed the highest percentage of companies using nanoparticles (21.2%). Other important sectors also reported nanoparticles. Personal protection equipment was the predominant protection strategy. Only a few applied specific environmental protection measures. This is the first nationwide representative study on nanoparticle use in the manufacturing sector. The information gained can be used for quantitative risk assessment. It can also help policymakers design strategies to support companies developing a safer use of nanomaterial. Noting the current low use of nanoparticles, there is still time to proactively introduce protective methods. If the predicted "nano-revolution" comes true, now is the time to take action.

Evaluation of Moisture-Cure Urethane Coatings for Compliance with Industry Specifications

DTIC Science & Technology

2011-12-01

Upon curing, RUST GRIP provides a protective coating of superior adhesion, flexibility, abrasion - and impact- resistance . It is resistant to most...THANE 2821 is an extremely hard abrasion resistant coating. It is ideally suited for usage such as bridges, tanks, locks and dams, marine structures...extremely hard abrasion resistant coating. It makes an excellent coating for concrete floors when used directly on concrete. CHEM-THANE 2822HS

Rotorcraft Master Plan

DTIC Science & Technology

1990-11-01

its new format , presents a picture of a healthy industry with potential for major growth. As traffic in the airway system grows faster than the...certification criteria. Civil tiltrotor certification is highlighted. In addition, work on health and usage monitoring technology and on small, short...Offim 34 major commercial airports will be congested by CAYt 3D . , ^mrmI 1997-even if we do all that is currently planned to expand NAS capacity (see

Engineered TPEs: new materials of choice for health care?

PubMed

Decordier, J M

1992-03-01

Engineered thermoplastic elastomers (ETPEs) are a relatively young, fast-growing generation of products and have an important strategic influence on both the rubber and plastics market. Much has been written about the increasing usage of plastics in the design and manufacture of medical devices, and today we may add ETPEs to this list, with significant benefits possible for the plastics industry manufacturing elastomeric parts using plastics processing technology.

Utilization of Condensed Distillers Solubles as Nutrient Supplement for Production of Nisin and Lactic Acid from Whey

NASA Astrophysics Data System (ADS)

Liu, Chuanbin; Hu, Bo; Chen, Shulin; Glass, Richard W.

The major challenge associated with the rapid growth of the ethanol industry is the usage of the coproducts, i.e., condensed distillers solubles (CDS) and distillers dried grains, which are currently sold as animal feed supplements. As the growth of the livestock industries remains flat, alternative usage of these coproducts is urgently needed. CDS is obtained after the removal of ethanol by distillation from the yeast fermentation of a grain or a grain mixture by condensing the thin stillage fraction to semisolid. In this work, CDS was first characterized and yeast biomass was proven to be the major component of CDS. CDS contained 7.50% crude protein but with only 42% of that protein being water soluble. Then, CDS was applied as a nutrient supplement for simultaneous production of nisin and lactic acid by Lactococcus lactis subsp. lactis (ATCC 11454). Although CDS was able to support bacteria growth and nisin production, a strong inhibition was observed when CDS was overdosed. This may be caused by the existence of the major ethanol fermentation byproducts, especially lactate and acetate, in CDS. In the final step, the CDS based medium composition for nisin and lactic acid production was optimized using response surface methodology.

Use of portable ladders - field observations and self-reported safety performance in the cable TV industry.

PubMed

Chang, Wen-Ruey; Huang, Yueng-Hsiang; Brunette, Christopher; Lee, Jin

2017-11-01

Portable ladders incidents remain a major cause of falls from heights. This study reported field observations of environments, work conditions and safety behaviour involving portable ladders and their correlations with self-reported safety performance. Seventy-five professional installers of a company in the cable and other pay TV industry were observed for 320 ladder usages at their worksites. The participants also filled out a questionnaire to measure self-reported safety performance. Proper setup on slippery surfaces, correct method for ladder inclination setup and ladder secured at the bottom had the lowest compliance with best practices and training guidelines. The observation compliance score was found to have significant correlation with straight ladder inclined angle (Pearson's r = 0.23, p < 0.0002) and employees' self-reported safety participation (r = 0.29, p < 0.01). The results provide a broad perspective on employees' safety compliance and identify areas for improving safety behaviours. Practitioner Summary: A checklist was used while observing professional installers of a cable company for portable ladder usage at their worksites. Items that had the lowest compliance with best practices and training guidelines were identified. The results provide a broad perspective on employees' safety compliance and identify areas for improving safety behaviours.

Supercritical carbon dioxide for textile applications and recent developments

NASA Astrophysics Data System (ADS)

Eren, H. A.; Avinc, O.; Eren, S.

2017-10-01

In textile industry, supercritical carbon dioxide (scCO2), possessing liquid-like densities, mostly find an application on textile dyeing processes such as providing hydrophobic dyes an advantage on dissolving. Their gas-like low viscosities and diffusion properties can result in shorter dyeing periods in comparison with the conventional water dyeing process. Supercritical carbon dioxide dyeing is an anhydrous dyeing and this process comprises the usage of less energy and chemicals when compared to conventional water dyeing processes leading to a potential of up to 50% lower operation costs. The advantages of supercritical carbon dioxide dyeing method especially on synthetic fiber fabrics hearten leading textile companies to alter their dyeing method to this privileged waterless dyeing technology. Supercritical carbon dioxide (scCO2) waterless dyeing is widely known and applied green method for sustainable and eco-friendly textile industry. However, not only the dyeing but also scouring, desizing and different finishing applications take the advantage of supercritical carbon dioxide (scCO2). In this review, not only the principle, advantages and disadvantages of dyeing in supercritical carbon dioxide but also recent developments of scCO2 usage in different textile processing steps such as scouring, desizing and finishing are explained and commercial developments are stated and summed up.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burge, S.W.

This report describes the theory and structure of the FORCE2 flow program. The manual describes the governing model equations, solution procedure and their implementation in the computer program. FORCE2 is an extension of an existing B&V multidimensional, two-phase flow program. FORCE2 was developed for application to fluid beds by flow implementing a gas-solids modeling technology derived, in part, during a joint government -- industry research program, ``Erosion of FBC Heat Transfer Tubes,`` coordinated by Argonne National Laboratory. The development of FORCE2 was sponsored by ASEA-Babcock, an industry participant in this program. This manual is the principal documentation for the programmore » theory and organization. Program usage and post-processing of code predictions with the FORCE2 post-processor are described in a companion report, FORCE2 -- A Multidimensional Flow Program for Fluid Beds, User`s Guide. This manual is segmented into sections to facilitate its usage. In section 2.0, the mass and momentum conservation principles, the basis for the code, are presented. In section 3.0, the constitutive relations used in modeling gas-solids hydrodynamics are given. The finite-difference model equations are derived in section 4.0 and the solution procedures described in sections 5.0 and 6.0. Finally, the implementation of the model equations and solution procedure in FORCE2 is described in section 7.0.« less

Regional elevator survey : grain transportation & industry trends for Great Plains elevators

DOT National Transportation Integrated Search

2001-08-01

One potential means for gaining insight into the current state of the elevator industry, : and into expectations for future trends, is through a survey. The objective of this study is to profile the transportation and industry characteristics of the ...

Vertical Integration: Corporate Strategy in the Information Industry.

ERIC Educational Resources Information Center

Davenport, Lizzie; Cronin, Blaise

1986-01-01

Profiles the corporate strategies of three sectors of the information industry and the trend toward consolidation in electronic publishing. Three companies' acquisitions are examined in detail using qualitative data from information industry columns and interpreting it on the basis of game theory. (EM)

Langue et rapports sociaux. Analyse des language d'usage chez des Italiens de deuxieme generation (Language and Social Relationships. Analysis of Languages Used by Second-Generation Italians).

ERIC Educational Resources Information Center

Fortier, Anne-Marie

A study investigated the choice of language (French, English, or Italian) for different activities and with different individuals among second-generation Italians in Quebec through interviews with 12 adults. The report first provides a sociolinguistic profile of the subjects and identifies the social factors associated with language choice in…

A network security monitor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heberlein, L.T.; Dias, G.V.; Levitt, K.N.

1989-11-01

The study of security in computer networks is a rapidly growing area of interest because of the proliferation of networks and the paucity of security measures in most current networks. Since most networks consist of a collection of inter-connected local area networks (LANs), this paper concentrates on the security-related issues in a single broadcast LAN such as Ethernet. Specifically, we formalize various possible network attacks and outline methods of detecting them. Our basic strategy is to develop profiles of usage of network resources and then compare current usage patterns with the historical profile to determine possible security violations. Thus, ourmore » work is similar to the host-based intrusion-detection systems such as SRI's IDES. Different from such systems, however, is our use of a hierarchical model to refine the focus of the intrusion-detection mechanism. We also report on the development of our experimental LAN monitor currently under implementation. Several network attacks have been simulated and results on how the monitor has been able to detect these attacks are also analyzed. Initial results demonstrate that many network attacks are detectable with our monitor, although it can surely be defeated. Current work is focusing on the integration of network monitoring with host-based techniques. 20 refs., 2 figs.« less

Harnessing the medicinal properties of Andrographis paniculata for diseases and beyond: a review of its phytochemistry and pharmacology

PubMed Central

Okhuarobo, Agbonlahor; Falodun, Joyce Ehizogie; Erharuyi, Osayemwenre; Imieje, Vincent; Falodun, Abiodun; Langer, Peter

2014-01-01

Andrographis paniculata Wall (family Acanthaceae) is one of the most popular medicinal plants used traditionally for the treatment of array of diseases such as cancer, diabetes, high blood pressure, ulcer, leprosy, bronchitis, skin diseases, flatulence, colic, influenza, dysentery, dyspepsia and malaria for centuries in Asia, America and Africa continents. It possesses several photochemical constituents with unique and interesting biological properties. This review describes the past and present state of research on Andrographis paniculata with respect to the medicinal usage, phytochemistry, pharmacological activities, toxicity profile and therapeutic usage, in order to bridge the gap requiring future research opportunities. This review is based on literature study on scientific journals and books from library and electronic sources. Diterpenes, flavonoids, xanthones, noriridoides and other miscellaneous compounds have been isolated from the plant. Extract and pure compounds of the plant have been reported for their anti-microbial, cytotoxicity, anti-protozoan, anti-inflammatory, anti-oxidant, immunostimulant, anti-diabetic, anti-infective, anti-angiogenic, hepato-renal protective, sex hormone/sexual function modulation, liver enzymes modulation insecticidal and toxicity activities. The results of numerous toxicity evaluations of extracts and metabolites isolated from this plant did not show any significant acute toxicity in experimental animals. Detailed and more comprehensive toxicity profile on mammalian tissues and organs is needed in future studies.

Water technology for specific water usage.

PubMed

Frimmel, Fritz H

2003-01-01

Water is the basis for life and culture. In addition to the availability of water its quality has become a major issue in industrialized areas and in developing countries as well. Water usage has to be seen as part of the hydrological cycle. As a consequence water management has to be sustainable. The aim of the contribution is to give water usage oriented quality criteria and to focus on the technical means to achieve them. Water is used for many purposes, ranging from drinking and irrigation to a broad variety of technical processes. Most applications need specific hygienic, chemical and/or physical properties. To meet these demands separation and reaction principles are applied. The reuse of water and the application of water treatment with little or no waste and by-product formation is the way to go. Membrane separation and advanced oxidation including catalytic reactions are promising methods that apply natural processes in sustainable technical performance. Thus elimination of specific water constituents (e.g. salts and metals, microorganisms) and waste water cleaning (e.g. pollutants, nutrients and organic water) can be done efficiently. Learning from nature and helping nature with appropriate technology is a convincing strategy for sustainable water management.

Development of industrial brewing yeast with low acetaldehyde production and improved flavor stability.

PubMed

Wang, Jinjing; Shen, Nan; Yin, Hua; Liu, Chunfeng; Li, Yongxian; Li, Qi

2013-02-01

Higher acetaldehyde concentration in beer is one of the main concerns of current beer industry in China. Acetaldehyde is always synthesized during beer brewing by the metabolism of yeast. Here, using ethanol as the sole carbon source and 4-methylpyrazole as the selection marker, we constructed a new mutant strain with lower acetaldehyde production and improved ethanol tolerance via traditional mutagenesis strategy. European Brewery Convention tube fermentation tests comparing the fermentation broths of mutant strain and industrial brewing strain showed that the acetaldehyde concentration of mutant strain was 81.67 % lower, whereas its resistant staling value was 1.0-fold higher. Owing to the mutation, the alcohol dehydrogenase activity of the mutant strain decreased to about 30 % of the wild-type strain. In the meantime, the fermentation performance of the newly screened strain has little difference compared with the wild-type strain, and there are no safety problems regarding the industrial usage of the mutant strain. Therefore, we suggest that the newly screened strain could be directly applied to brewing industry.

Intelligent robot trends for factory automation

NASA Astrophysics Data System (ADS)

Hall, Ernest L.

1997-09-01

An intelligent robot is a remarkably useful combination of a manipulator, sensors and controls. The use of these machines in factory automation can improve productivity, increase product quality and improve competitiveness. This paper presents a discussion of recent economic and technical trends. The robotics industry now has a billion-dollar market in the U.S. and is growing. Feasibility studies are presented which also show unaudited healthy rates of return for a variety of robotic applications. Technically, the machines are faster, cheaper, more repeatable, more reliable and safer. The knowledge base of inverse kinematic and dynamic solutions and intelligent controls is increasing. More attention is being given by industry to robots, vision and motion controls. New areas of usage are emerging for service robots, remote manipulators and automated guided vehicles. However, the road from inspiration to successful application is still long and difficult, often taking decades to achieve a new product. More cooperation between government, industry and universities is needed to speed the development of intelligent robots that will benefit both industry and society.

The Feasibility of Palm Kernel Shell as a Replacement for Coarse Aggregate in Lightweight Concrete

NASA Astrophysics Data System (ADS)

Itam, Zarina; Beddu, Salmia; Liyana Mohd Kamal, Nur; Ashraful Alam, Md; Issa Ayash, Usama

2016-03-01

Implementing sustainable materials into the construction industry is fast becoming a trend nowadays. Palm Kernel Shell is a by-product of Malaysia’s palm oil industry, generating waste as much as 4 million tons per annum. As a means of producing a sustainable, environmental-friendly, and affordable alternative in the lightweight concrete industry, the exploration of the potential of Palm Kernel Shell to be used as an aggregate replacement was conducted which may give a positive impact to the Malaysian construction industry as well as worldwide concrete usage. This research investigates the feasibility of PKS as an aggregate replacement in lightweight concrete in terms of compressive strength, slump test, water absorption, and density. Results indicate that by using PKS for aggregate replacement, it increases the water absorption but decreases the concrete workability and strength. Results however, fall into the range acceptable for lightweight aggregates, hence it can be concluded that there is potential to use PKS as aggregate replacement for lightweight concrete.

Specification of Energy Assessment Methodologies to Satisfy ISO 50001 Energy Management Standard

NASA Astrophysics Data System (ADS)

Kanneganti, Harish

Energy management has become more crucial for industrial sector as a way to lower their cost of production and in reducing their carbon footprint. Environmental regulations also force the industrial sector to increase the efficiency of their energy usage. Hence industrial sector started relying on energy management consultancies for improvements in energy efficiency. With the development of ISO 50001 standard, the entire energy management took a new dimension involving top level management and getting their commitment on energy efficiency. One of the key requirements of ISO 50001 is to demonstrate continual improvement in their (industry) energy efficiency. The major aim of this work is to develop an energy assessment methodology and reporting format to tailor the needs of ISO 50001. The developed methodology integrates the energy reduction aspect of an energy assessment with the requirements of sections 4.4.3 (Energy Review) to 4.4.6 (Objectives, Targets and Action Plans) in ISO 50001 and thus helping the facilities in easy implementation of ISO 50001.

GHGRP Yearly Overview

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses. This page hosts data highlights for all sectors.

Final Report: Wireless Instrument for Automated Measurement of Clean Cookstove Usage and Black Carbon Emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lukac, Martin; Ramanathan, Nithya; Graham, Eric

2013-09-10

Black carbon (BC) emissions from traditional cooking fires and other sources are significant anthropogenic drivers of radiative forcing. Clean cookstoves present a more energy-efficient and cleaner-burning vehicle for cooking than traditional wood-burning stoves, yet many existing cookstoves reduce emissions by only modest amounts. Further research into cookstove use, fuel types, and verification of emissions is needed as adoption rates for such stoves remain low. Accelerated innovation requires techniques for measuring and verifying such cookstove performance. The overarching goal of the proposed program was to develop a low-cost, wireless instrument to provide a high-resolution profile of the cookstove BC emissions andmore » usage in the field. We proposed transferring the complexity of analysis away from the sampling hardware at the measurement site and to software at a centrally located server to easily analyze data from thousands of sampling instruments. We were able to build a low-cost field-based instrument that produces repeatable, low-cost estimates of cookstove usage, fuel estimates, and emission values with low variability. Emission values from our instrument were consistent with published ranges of emissions for similar stove and fuel types.« less

Cadmium--influence on biochemical processes of the human organism.

PubMed

Boguszewska, Anna; Pasternak, Kazimierz

2004-01-01

Heavy metals are too well-known environmental pollutants of particularly dangerous effect to human health. Because of their wide usage in many industrial branches they are present everywhere in the air, water and soils. Food contamination by heavy elements is hard to avoid and it is a result of environmental contamination by dusts, industrial gases, sewage, waste and coal burning processes. One of the most harmful heavy metals, widely spread in nature is cadmium. Toxic cadmium action involves free oxygen generation and inactivation of protein containing cysteine residues with -SH groups. It influences many metabolic processes causing great damage in many organs. Cadmium can also interact with some essential elements leading to their homeostasis disorders.

Progress of succinic acid production from renewable resources: Metabolic and fermentative strategies.

PubMed

Jiang, Min; Ma, Jiangfeng; Wu, Mingke; Liu, Rongming; Liang, Liya; Xin, Fengxue; Zhang, Wenming; Jia, Honghua; Dong, Weiliang

2017-12-01

Succinic acid is a four-carbon dicarboxylic acid, which has attracted much interest due to its abroad usage as a precursor of many industrially important chemicals in the food, chemicals, and pharmaceutical industries. Facing the shortage of crude oil supply and demand of sustainable development, biological production of succinic acid from renewable resources has become a topic of worldwide interest. In recent decades, robust producing strain selection, metabolic engineering of model strains, and process optimization for succinic acid production have been developed. This review provides an overview of succinic acid producers and cultivation technology, highlight some of the successful metabolic engineering approaches. Copyright © 2017 Elsevier Ltd. All rights reserved.

Molecular classification of fatty liver by high-throughput profiling of protein post-translational modifications.

PubMed

Urasaki, Yasuyo; Fiscus, Ronald R; Le, Thuc T

2016-04-01

We describe an alternative approach to classifying fatty liver by profiling protein post-translational modifications (PTMs) with high-throughput capillary isoelectric focusing (cIEF) immunoassays. Four strains of mice were studied, with fatty livers induced by different causes, such as ageing, genetic mutation, acute drug usage, and high-fat diet. Nutrient-sensitive PTMs of a panel of 12 liver metabolic and signalling proteins were simultaneously evaluated with cIEF immunoassays, using nanograms of total cellular protein per assay. Changes to liver protein acetylation, phosphorylation, and O-N-acetylglucosamine glycosylation were quantified and compared between normal and diseased states. Fatty liver tissues could be distinguished from one another by distinctive protein PTM profiles. Fatty liver is currently classified by morphological assessment of lipid droplets, without identifying the underlying molecular causes. In contrast, high-throughput profiling of protein PTMs has the potential to provide molecular classification of fatty liver. Copyright © 2016 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd.

Application of the dynamic model of Saeman to an industrial rotary kiln incinerator: numerical and experimental results.

PubMed

Ndiaye, L G; Caillat, S; Chinnayya, A; Gambier, D; Baudoin, B

2010-07-01

In order to simulate granular materials structure in a rotary kiln under the steady-state regime, a mathematical model has been developed by Saeman (1951). This model enables the calculation of the bed profiles, the axial velocity and solids flow rate along the kiln. This model can be coupled with a thermochemical model, in the case of a reacting moving bed. This dynamic model was used to calculate the bed profile for an industrial size kiln and the model projections were validated by measurements in a 4 m diameter by 16 m long industrial rotary kiln. The effect of rotation speed under solids bed profile and the effect of the feed rate under filling degree were established. On the basis of the calculations and the experimental results a phenomenological relation for the residence time estimation was proposed for the rotary kiln. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

The Target Industries: Profiles of Five Hazardous Occupations.

ERIC Educational Resources Information Center

Occupational Safety and Health Administration, Washington, DC.

To contribute to a fuller understanding and awareness of the hazards involved in industries as well as to call attention to steps being taken to solve safety problems, this pamphlet surveys five industries cited among those having the highest rates of job-related injuries in the country. Industries include: (1) Roofing and Sheet Metal, (2)…

Automotive Refinishing Industry: Isocyanates Profile

EPA Pesticide Factsheets

The isocyanates profile document is part of the DfE Auto Refinishing Shop Project and is intended to provide information on refinishing, control technologies, and regulatory status regarding isocyanate compounds

Defence electronics industry profile, 1990-1991

NASA Astrophysics Data System (ADS)

The defense electronics industry profiled in this review comprises an estimated 150 Canadian companies that develop, manufacture, and repair radio and communications equipment, radars for surveillance and navigation, air traffic control systems, acoustic and infrared sensors, computers for navigation and fire control, signal processors and display units, special-purpose electronic components, and systems engineering and associated software. Canadian defense electronics companies generally serve market niches and end users of their products are limited to the military, government agencies, or commercial airlines. Geographically, the industry is concentrated in Ontario and Quebec, where about 91 percent of the industry's production and employment is found. In 1989, the estimated revenue of the industry was $2.36 billion, and exports totalled an estimated $1.4 billion. Strengths and weaknesses of the industry are discussed in terms of such factors as the relatively small size of Canadian companies, the ability of Canadian firms to access research and development opportunities and export markets in the United States, the dependence on foreign-made components, and international competition.

Commercial Banking Industry Survey.

ERIC Educational Resources Information Center

Bright Horizons Children's Centers, Cambridge, MA.

Work and family programs are becoming increasingly important in the commercial banking industry. The objective of this survey was to collect information and prepare a commercial banking industry profile on work and family programs. Fifty-nine top American commercial banks from the Fortune 500 list were invited to participate. Twenty-two…

Hexabromocyclododecanes (HBCDDs) in surface soils from coastal cities in North China: Correlation between diastereoisomer profiles and industrial activities.

PubMed

Zhang, Yueqing; Li, Qifeng; Lu, Yonglong; Jones, Kevin; Sweetman, Andrew J

2016-04-01

Hexabromocyclododecane (HBCDD) is a brominated flame retardant with a wide range of industrial applications, although little is known about its patterns of spatial distribution in soils in relation to industrial emissions. This study has undertaken a large-scale investigation around an industrialized coastal area of China, exploring the concentrations, spatial distribution and diastereoisomer profiles of HBCDD in 188 surface soils from 21 coastal cities in North China. The detection frequency was 100% and concentrations of total HBCDD in the surface soils ranged from 0.123 to 363 ng g(-1) and averaged 7.20 ng g(-1), showing its ubiquitous existence at low levels. The spatial distribution of HBCDD exhibited a correlation with the location of known manufacturing facilities in Weifang, suggesting the production of HBCDD as major emission source. Diastereoisomer profiles varied in different cities. Diastereoisomer compositions in soils were compared with emissions from HBCDD industrial activities, and correlations were found between them, which has the potential for source identification. Although the contemporary concentrations of HBCDD in soils from the study were relatively low, HBCDD-containing products (expanded/extruded polystyrene insulation boards) would be a potential source after its service life, and attention needs to be paid to prioritizing large-scale waste management efforts. Copyright © 2016 Elsevier Ltd. All rights reserved.

Industrial ecology Prosperity Game{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, D.; Boyack, K.; Berman, M.

1998-03-01

Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the systemmore » boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.« less

MAC, A System for Automatically IPR Identification, Collection and Distribution

NASA Astrophysics Data System (ADS)

Serrão, Carlos

Controlling Intellectual Property Rights (IPR) in the Digital World is a very hard challenge. The facility to create multiple bit-by-bit identical copies from original IPR works creates the opportunities for digital piracy. One of the most affected industries by this fact is the Music Industry. The Music Industry has supported huge losses during the last few years due to this fact. Moreover, this fact is also affecting the way that music rights collecting and distributing societies are operating to assure a correct music IPR identification, collection and distribution. In this article a system for automating this IPR identification, collection and distribution is presented and described. This system makes usage of advanced automatic audio identification system based on audio fingerprinting technology. This paper will present the details of the system and present a use-case scenario where this system is being used.

Wood energy-commercial applications

NASA Technical Reports Server (NTRS)

Kennel, R. P.

1978-01-01

Wood energy is being widely investigated in many areas of the country because of the many obvious benefits of wood fuel such as the low price per million Btus relative to coal, oil, and gas; the wide availability of noncommercial wood and the proven ability to harvest it; established technology which is reliable and free of pollution; renewable resources; better conservation for harvested land; and the potential for jobs creation. The Southeastern United States has a specific leadership role in wood energy based on its established forest products industry experience and the potential application of wood energy to other industries and institutions. Significant questions about the widespread usage of wood energy are being answered in demonstrations around the country as well as the Southeast in areas of wood storage and bulk handling; high capitalization costs for harvesting and combustion equipment; long term supply and demand contracts; and the economic feasibility of wood energy outside the forest products industry.

Project Management Software for Distributed Industrial Companies

NASA Astrophysics Data System (ADS)

Dobrojević, M.; Medjo, B.; Rakin, M.; Sedmak, A.

This paper gives an overview of the development of a new software solution for project management, intended mainly to use in industrial environment. The main concern of the proposed solution is application in everyday engineering practice in various, mainly distributed industrial companies. Having this in mind, special care has been devoted to development of appropriate tools for tracking, storing and analysis of the information about the project, and in-time delivering to the right team members or other responsible persons. The proposed solution is Internet-based and uses LAMP/WAMP (Linux or Windows - Apache - MySQL - PHP) platform, because of its stability, versatility, open source technology and simple maintenance. Modular structure of the software makes it easy for customization according to client specific needs, with a very short implementation period. Its main advantages are simple usage, quick implementation, easy system maintenance, short training and only basic computer skills needed for operators.

Performance profiling for brachytherapy applications

NASA Astrophysics Data System (ADS)

Choi, Wonqook; Cho, Kihyeon; Yeo, Insung

2018-05-01

In many physics applications, a significant amount of software (e.g. R, ROOT and Geant4) is developed on novel computing architectures, and much effort is expended to ensure the software is efficient in terms of central processing unit (CPU) time and memory usage. Profiling tools are used during the evaluation process to evaluate the efficiency; however, few such tools are able to accommodate low-energy physics regions. To address this limitation, we developed a low-energy physics profiling system in Geant4 to profile the CPU time and memory of software applications in brachytherapy applications. This paper describes and evaluates specific models that are applied to brachytherapy applications in Geant4, such as QGSP_BIC_LIV, QGSP_BIC_EMZ, and QGSP_BIC_EMY. The physics range in this tool allows it to be used to generate low energy profiles in brachytherapy applications. This was a limitation in previous studies, which caused us to develop a new profiling tool that supports profiling in the MeV range, in contrast to the TeV range that is supported by existing high-energy profiling tools. In order to easily compare the profiling results between low-energy and high-energy modes, we employed the same software architecture as that in the SimpliCarlo tool developed at the Fermilab National Accelerator Laboratory (FNAL) for the Large Hadron Collider (LHC). The results show that the newly developed profiling system for low-energy physics (less than MeV) complements the current profiling system used for high-energy physics (greater than TeV) applications.

The Impact of Laws on Metric Conversion: A Survey of Selected Large U.S. Corporations.

DTIC Science & Technology

1982-02-01

resulting from increasing metric usage (Section 6-8). * Conduct researc [., including appropriate surveys; publish recults of such research; and recommend to...Products Case Study There has been very little conversion of the products manufactured and marketed by this firm. According to the firm representative...sizes for marketing reasons. The industry action resulted in this firm PAGE A-3 • F - L ’... . " ... . -, . . .-,--m :..: - - A THE NEWMAN & HERMANSON

The economic and social aspects of sanitary landfill site selection

NASA Technical Reports Server (NTRS)

Graff, W. J.; Rogers, J. R.

1972-01-01

The factors involved in the selection of suitable sites for sanitary land fills are discussed. The economic considerations and problems of social acceptance are considered the most important. The subjects discussed are: (1) accessibility of land, (2) availability of cover material, (3) expected capacity of site, (4) cover material and compaction, (5) fire protection, (6) site location with respect to residential and industrial areas, and (7) land usage after landfill completion.

Prospects on hydrogen production for a generalized domestic, industrial and automotive, usage

NASA Astrophysics Data System (ADS)

Dini, D.

Assuming the availability of advanced nuclear and solar systems as prime energy sources for electrolytic production of hydrogen, an assessment is made of high pressure electrolytic gasification, liquefaction and storage work requirements. Also, a pipeline network and associated equipment for the delivery and storage of hydrogen are considered in the context of a future replacement of all fossil fuels by hydrogen. Attention is given to space-based systems and terrestrial photovoltaics.

Planning Strategies for Transportation Fuel Consumption Reduction: An Evaluation of the Hawaii Clean Energy Initiative’s Transportation Plan

DTIC Science & Technology

2014-04-01

technologies to improve fleet efficiency goals, and evaluate switching to biodiesel for trucks and vehicles without other alternatives (HCEI 2011...standards and biodiesel usage levels 2020 Goal 50 MGY of renewable fuels 28 working with industry to increase EV market penetration, and...Strategy Reduction Potential Purchase more efficient vehicles 10-20% Promote hybrid technologies 10-20% Evaluate biodiesel switching (freight) TBD

Polychlorinated biphenyls and organochlorine pesticides in River Brahmaputra from the outer Himalayan Range and River Hooghly emptying into the Bay of Bengal: Occurrence, sources and ecotoxicological risk assessment.

PubMed

Chakraborty, Paromita; Khuman, Sanjenbam Nirmala; Selvaraj, Sakthivel; Sampath, Srimurali; Devi, Ningombam Linthoingambi; Bang, John J; Katsoyiannis, Athanasios

2016-12-01

River Brahmaputra (RB) from the outer Himalayan Range and River Hooghly (RH), a distributary of River Ganga, are the two largest transboundary perennial rivers supplying freshwater to the northeastern and eastern states of India. Given the history of extensive usage of organochlorine pesticides and increasing industrialization along the banks of these rivers we investigated selected organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) in the surface water of River Brahmaputra and River Hooghly. Geomean of ΣOCPs (53 ng L -1 ) and Σ 19 PCBs (108 ng L -1 ) was higher in RH compared with geomean of ΣOCPs (24 ng L -1 ) and Σ 19 PCBs (77 ng L -1 ) in RB. Among OCPs, γ-HCH showed maximum detection frequency in both the rivers reflecting ongoing lindane usage. DDT and endosulfan residues were observed at specific locations where past or ongoing sources exist. Elevated concentrations of heavier congeners (penta-hepta) were observed in those sites along RH where port and industrial activities were prevalent including informal electronic waste scrap processing units. Furthermore along River Hooghly PCB-126 was high in the suburban industrial belt of Howrah district. PCBs were found to be ubiquitously distributed in RB. Atmospheric transport of tri- and tetra-PCB congeners from the primary source regions might be a major contributor for PCBs in RB. Heavier congeners (penta-nona) in the urban centers of RB were likely due to industrial wastewater runoff from the oil refineries in the Brahmaputra valley. Σ 19 PCBs concentrations in this study exceeded the USEPA recommended limit for freshwater. Ecotoxicological risk assessment showed the possibility of adverse impact on the organisms in the lower trophic level due to DDT and lindane contamination. Impact of endosulfan on fishes might be of considerable concern for aquatic environment. Copyright © 2016 Elsevier Ltd. All rights reserved.

Mask industry assessment: 2008

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2008-10-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by David Powell Consulting to gather information about the mask industry as an objective assessment of its overall condition. The survey is designed with the input of semiconductor company mask technologists, merchant mask suppliers, and industry equipment makers. This year's assessment is the seventh in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey is basically the same as the 2005 through 2007 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that create a detailed profile of both the business and technical status of the critical mask industry.

The effect of TiO2 coating on biological NiTi alloys after micro-arc oxidation treatment for corrosion resistance.

PubMed

Sukuroglu, Ebru Emine; Sukuroglu, Suleyman; Akar, Kubra; Totik, Yasar; Efeoglu, Ihsan; Arslan, Ersin

2017-08-01

NiTi alloys exhibit good properties, such as shape memory behavior, high corrosion resistant, having the closest elasticity modulus of a human bone and superior biocompatibility properties. However, the surface problems that arise during the use of this alloy limit the usage in the industry and health sector. In recent years, micro-arc oxidation method is used to improve the surface properties and increase the usage of these alloys. In this study, the TiO 2 coatings were deposited on the NiTi substrates. The surface topography, morphology, crystallographic structure, and thickness of the coatings were determined using scanning electron microscopy and X-ray diffraction. The corrosion properties were investigated using potentiostat test unit in two different media such as NaCl solution and simulated body fluid. The results show that the coated samples have higher corrosion resistance than uncoated samples in the two different media.

Cost efficient carbon fibre reinforced thermoplastics with in-situ polymerization of polyamide

NASA Astrophysics Data System (ADS)

Köhler, T.; Akdere, M.; Röding, T.; Gries, T.; Seide, G.

2017-10-01

Lightweight design has gained more and more relevance over the last decades. Especially in automotive industry it is of paramount importance to reduce weight and save fuel. At the same time the demand for safety and performance increases the components’ weight. To reach a trade-off between driving comfort and efficiency new lightweight materials have to be developed. One possible solution is the usage of carbon fibre reinforced thermoplastics (CFRTP) as a lightweight substitute material. In contrast to conventional carbon fibre reinforced plastics (CFRP), CFRTPs are cheaper and have a higher impact resistance. Furthermore they are characterized by hot forming ability, weldability and recyclability. However, the impregnation of the textile requires high pressure, because of the melted polymer’s high viscosity. A new innovative approach for CFRTP is the usage of in-situ polymerization with ɛ-caprolactam as matrix, which has a much lower viscosity and thus requires much lower pressure for impregnation and consolidation.

Conservation and laundry: using outside vendors to clean reusable linens.

PubMed

McKnight, D

1992-08-01

Using outside laundry facilities is a viable and efficient means for hospitals to clean and sanitize soiled linens. Such services also allow hospitals to achieve cost-effective linen systems. All kinds of linen products, including gowns, sheets, blankets, pillowcases, mops, diapers, and surgical textiles, are easily processed through such purveyors. Even newer fabrics with improved barrier protection qualities can be serviced. The three elements that make up the laundry cost equation are purchasing, processing, and usage. Improvements and reductions in any one of these areas positively affect the other two. With this in mind, a hospital and an outside laundry service should work closely together to improve linen management, to control usage, and to remove waste, thus reducing hospitals' per-patient-day costs. Close interaction and teamwork will make the relationship work with dynamic results. Together, both parties will grow and meet the ever-evolving needs of the health care industry.

Antioxidant Activity of Coconut (Cocos nucifera L.) Protein Fractions.

PubMed

Li, Yan; Zheng, Yajun; Zhang, Yufeng; Xu, Jianguo; Gao, Gang

2018-03-20

Coconut cake is an abundant and good potential edible protein source. However, until now it has not been extensively used in the food industry. To promote its usage, the characterization, nutrition value and antioxidant activity of coconut cake protein fractions (albumin, globulin, prolamine, glutelin-1 and glutelin-2) were studied. Results revealed that all the albumin, globulin, glutelin-1 and glutelin-2 fractions showed a high nutrition value. The prolamine, glutelin-1 and glutelin-2 all exhibited good radical scavenging activity and reducing power, and the globulin and prolamine showed high ion chelating ability (89.14-80.38%). Moreover, all the fractions except glutelin-2 could effectively protect DNA against oxidative damage. Several peptides containing five to eight amino acids with antioxidant activity were also identified by LC-MS/MS from the globulin and glutelin-2 fractions. The results demonstrated that the coconut cake protein fractions have potential usages in functional foods.

Archive of GHGRP Yearly Overviews

EPA Pesticide Factsheets

EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses. This page hosts archive of data highlights for all sectors.

Elementary School Achievement Profiles, Portland Public Schools. A School-by-School Report of Basic Skills Test Results and School/Student/Staff Data. School Year 1985-86.

ERIC Educational Resources Information Center

Portland Public Schools, OR. Dept. of Research, Evaluation, and Testing.

This report contains Portland Achievement Levels Tests results for the 63 elementary schools, 16 middle schools, and 1 special program school in the Portland (Oregon) School District for the 1985-86 school year. Results in reading, language usage, and mathematics are reported for children in grades 3 to 8. Each school data page presents the…

The Effects of Educational Technology Usage Profiles and Legally Protected Bio-Demographic Data on Behaviorally-Based Predictive Student Success Models in Learning Analytics: An Exploratory Study

ERIC Educational Resources Information Center

Arnold, Kimberly E.

2017-01-01

In the 21st century, attainment of a college degree is more important than ever to achieve economic self-sufficiency, employment, and an adequate standard of living. Projections suggest that by 2020, 65% of jobs available in the U.S. will require postsecondary education. This reality creates an unprecedented demand for higher education, and…

Post Occupancy energy evaluation of Ronald Tutor Hall using eQUEST; Computer based simulation of existing building and comparison of data

NASA Astrophysics Data System (ADS)

Dulom, Duyum

Buildings account for about 40 percent of total U.S. energy consumption. It is therefore important to shift our focus on important measures that can be taken to make buildings more energy efficient. With the rise in number of buildings day by day and the dwindling resources, retrofitting buildings is the key to an energy efficiency future. Post occupancy evaluation (POE) is an important tool and is ideal for the retrofitting process. POE would help to identify the problem areas in the building and enable researchers and designers to come up with solutions addressing the inefficient energy usage as well as the overall wellbeing of the users of the building. The post occupancy energy evaluation of Ronald Tutor Hall (RTH) located at the University of Southern California is one small step in that direction. RTH was chosen to study because; (a) relatively easy access to the building data (b) it was built in compliance with Title 24 2001 and (c) it was old enough to have post occupancy data. The energy modeling tool eQuest was used to simulate the RTH building using the background information of the building such as internal thermal comfort profile, occupancy profile, building envelope profile, internal heat gain profile, etc. The simulation results from eQuest were then compared with the actual building recorded data to verify that our simulated model was behaving similar to the actual building. Once we were able to make the simulated model behave like the actual building, changes were made to the model such as installation of occupancy sensor in the classroom & laboratories, changing the thermostat set points and introducing solar shade on northwest and southwest facade. The combined savings of the proposed interventions resulted in a 6% savings in the overall usage of energy.

Gathering Real World Evidence with Cluster Analysis for Clinical Decision Support.

PubMed

Xia, Eryu; Liu, Haifeng; Li, Jing; Mei, Jing; Li, Xuejun; Xu, Enliang; Li, Xiang; Hu, Gang; Xie, Guotong; Xu, Meilin

2017-01-01

Clinical decision support systems are information technology systems that assist clinical decision-making tasks, which have been shown to enhance clinical performance. Cluster analysis, which groups similar patients together, aims to separate patient cases into phenotypically heterogenous groups and defining therapeutically homogeneous patient subclasses. Useful as it is, the application of cluster analysis in clinical decision support systems is less reported. Here, we describe the usage of cluster analysis in clinical decision support systems, by first dividing patient cases into similar groups and then providing diagnosis or treatment suggestions based on the group profiles. This integration provides data for clinical decisions and compiles a wide range of clinical practices to inform the performance of individual clinicians. We also include an example usage of the system under the scenario of blood lipid management in type 2 diabetes. These efforts represent a step toward promoting patient-centered care and enabling precision medicine.

How does consumer knowledge affect environmentally sustainable choices? Evidence from a cross-country latent class analysis of food labels.

PubMed

Peschel, Anne O; Grebitus, Carola; Steiner, Bodo; Veeman, Michele

2016-11-01

This paper examines consumers' knowledge and lifestyle profiles and preferences regarding two environmentally labeled food staples, potatoes and ground beef. Data from online choice experiments conducted in Canada and Germany are analyzed through latent class choice modeling to identify the influence of consumer knowledge (subjective and objective knowledge as well as usage experience) on environmentally sustainable choices. We find that irrespective of product or country under investigation, high subjective and objective knowledge levels drive environmentally sustainable food choices. Subjective knowledge was found to be more important in this context. Usage experience had relatively little impact on environmentally sustainable choices. Our results suggest that about 20% of consumers in both countries are ready to adopt footprint labels in their food choices. Another 10-20% could be targeted by enhancing subjective knowledge, for example through targeted marketing campaigns. Copyright © 2016 Elsevier Ltd. All rights reserved.

Safety of topical minoxidil solution: a one-year, prospective, observational study.

PubMed

Shapiro, Jerry

2003-01-01

Topical minoxidil solution (TMS) is widely used for androgenetic alopecia (AGA), and this is the first report of a large safety trial. The aim of the study was to evaluate the safety profile of TMS by comparing hospitalization and death rates among subjects using TMS with controls. Cardiovascular safety and pregnancy outcomes were evaluated, and usage patterns were described. All subjects were followed at baseline, 3, 6, 9, and 12 months. Usage patterns, pregnancy status, overnight hospital stays, and cardiovascular risk factors were evaluated. Subjects rated effectiveness of TMS in the treatment of AGA. Statistical analyses were conducted to determine if TMS was associated with an increased risk of death or hospitalization. TMS is a safe and effective treatment for AGA. There were no increases in cardiovascular events and no apparent increased risk for adverse pregnancy outcomes. This large, prospective study demonstrated the overall safety of TMS in the treatment of AGA.

Profiles of Major Suppliers to the Automotive Industry : Vol. 7. Machine Tool Suppliers to the Automotive Industry.

DOT National Transportation Integrated Search

1982-08-01

This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

Profiles of Major Suppliers to the Automotive Industry : Vol. 3. Plastics, Glass and Fiberglass Suppliers to the Automotive Industry

DOT National Transportation Integrated Search

1982-08-01

This study summarizes extensive information collected over a two-year period (October 1978 to 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study was to ...

Profiles of Major Suppliers to the Automotive Industry : Vol. 2. Iron, Steel and Aluminum Suppliers to the Automotive Industry

DOT National Transportation Integrated Search

1982-08-01

This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

Best Practices in School-to-Careers: The Home Building Industry.

ERIC Educational Resources Information Center

National Employer Leadership Council, Washington, DC.

This document highlights the school-to-careers (STC) partnerships connecting workplace experiences to classroom learning to prepare students for successful employment in the home building industry. First, the current state of the home building industry is reviewed. Next, the following organizations and employers are profiled: (1) the National…

78 FR 15046 - InfraGard Membership Application and Profile Proposed Collection, Comments Requested; InfraGard...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-08

... Department of Justice (DOJ), Federal Bureau of Investigation (FBI), Cyber Division's National Industry... Agent, National Industry Partnerships Unit, Federal Bureau of Investigation, Cyber Division, FBIHQ, 935... Industry Partnership Unit (NIPU) Cyber Division of the Federal Bureau of Investigation (FBI), Department of...

Philippine Public Relations: An Industry and Practitioner Profile.

ERIC Educational Resources Information Center

Panol, Zenaida Sarabia

2000-01-01

Provides a comprehensive look at public relations in the Philippines; traces how public relations evolved in this Southeast Asian country; and discusses the current status of the industry and its practitioners. (NH)

Prediction of the acoustic pressure above periodically uneven facings in industrial workplaces

NASA Astrophysics Data System (ADS)

Ducourneau, J.; Bos, L.; Planeau, V.; Faiz, Adil; Skali Lami, Salah; Nejade, A.

2010-05-01

The aim of this work is to predict sound pressure in front of wall facings based on periodic sound scattering surface profiles. The method involves investigating plane wave reflections randomly incident upon an uneven surface. The waveguide approach is well suited to the geometries usually encountered in industrial workplaces. This method simplifies the profile geometry by using elementary rectangular volumes. The acoustic field in the profile interstices can then be expressed as the superposition of waveguide modes. In past work, walls considered are of infinite dimensions and are subjected to a periodic surface profile in only one direction. We therefore generalise this approach by extending its applicability to "double-periodic" wall facings. Free-field measurements have been taken and the observed agreement between numerical and experimental results supports the validity of the waveguide method.

Influence of pharmacogenomic profiling prior to pharmaceutical treatment in metastatic colorectal cancer on cost effectiveness : a systematic review.

PubMed

Frank, Martin; Mittendorf, Thomas

2013-03-01

Metastatic colorectal cancer (mCRC) imposes a substantial health burden on individual patients and society. Furthermore, rising costs in oncology cause a growing concern about reimbursement for innovations in this sector. The promise of pharmacogenomic profiling and related stratified therapies in mCRC is to improve treatment efficacy and potentially save costs. Among other examples, the commonly used epidermal growth factor receptor (EGFR) antibodies cetuximab and panitumumab are only effective in patients with kirsten rat sarcoma viral oncogene homolog (KRAS) wild-type cancers. Hence, the adaptation of predictive biomarker testing might be a valid strategy for healthcare systems worldwide. This study aims to review the clinical and economic evidence supporting pharmacogenomic profiling prior to the administration of pharmaceutical treatment in mCRC. Moreover, key drivers and areas of uncertainty in cost-effectiveness evaluations are analysed. A systematic literature review was conducted to identify studies evaluating the cost effectiveness of predictive biomarkers and the result dependent usage of pharmaceutical agents in mCRC. The application of predictive biomarkers to detect KRAS mutations prior to the administration of EGFR antibodies saved treatment costs and was cost effective in all identified evaluations. However, because of the lack of data regarding cost-effectiveness analyses for predictive biomarker testing, e.g. for first-line treatment, definitive conclusions cannot be stated. Key drivers and areas of uncertainty in current cost-effectiveness analyses are, among others, the consideration of predictive biomarker costs, the characteristics of single predictive biomarkers and the availability of clinical data for the respective pharmaceutical intervention. Especially the cost effectiveness of uridine diphosphate-glucuronyl transferase 1A1 (UGT1A1) mutation analysis prior to irinotecan-based chemotherapy remains unclear. Pharmacogenomic profiling has the potential to improve the cost effectiveness of pharmaceutical treatment in mCRC. Hence, quantification of the economic impact of stratified medicine as well as cost-effectiveness analyses of pharmacogenomic profiling are becoming more important. Nevertheless, the methods applied in cost-effectiveness evaluations for the usage of predictive biomarkers for patient selection as well as the level of evidence required to determine clinical effectiveness are areas for further research. However, mCRC is one of the first indications in which stratified therapies are used in clinical practice. Thus, clinical and economic experiences could be helpful when adopting pharmacogenomic profiling into clinical practice for other indications.

Applications of aerospace technology in industry: A technology transfer profile, nondestructive testing

NASA Technical Reports Server (NTRS)

1972-01-01

The development of nondestructive testing procedures by NASA and the transfer of nondestructive testing to technology to civilian industry are discussed. The subjects presented are: (1) an overview of the nondestructive testing field, (2) NASA contributions to the field of nondestructive testing, (3) dissemination of NASA contributions, and (4) a transfer profile. Attachments are included which provide a brief description of common nondestructive testing methods and summarize the technology transfer reports involving NASA generated nondestructive testing technology.

MMPI-2 Profiles in Civilian PTSD: An Examination of Differential Responses between Victims of Crime and Industrial Accidents

ERIC Educational Resources Information Center

Shercliffe, Regan Jeffery; Colotla, Victor

2009-01-01

The authors studied MMPI-2 profiles of workers (N = 83) diagnosed with posttraumatic stress disorder (PTSD) and a control group comprising workers with chronic pain (N = 40). Significant differences were seen in profiles between the PTSD groups and the control group, and the authors compared the PTSD profiles according to exposure to two different…

Feasibility study for converting traditional line assembly into work cells for termination of fiber optics cable

NASA Astrophysics Data System (ADS)

Caldeira, Rylan; Honnungar, Sunilkumar

2018-04-01

Most of small to medium industries tend to follow traditional systems of manufacturing which aims at maximum resource utilization irrespective of giving attention to customers volatile demand. In recent times manufacturing is being shifted to be consumers centered, with intense competition among industries to satisfy the customer needs in the required quantity and at the right time. To achieve this, companies investigate the possibility of implementation of cellular manufacturing which is characterized by high variety with optimum usage of resources. Cellular layout coupled with the application of lean methodology, places focus on the production process rather than the production methods so as to identify the wastage and apply methods to further improve productivity.

USGIN ISO metadata profile

NASA Astrophysics Data System (ADS)

Richard, S. M.

2011-12-01

The USGIN project has drafted and is using a specification for use of ISO 19115/19/39 metadata, recommendations for simple metadata content, and a proposal for a URI scheme to identify resources using resolvable http URI's(see http://lab.usgin.org/usgin-profiles). The principal target use case is a catalog in which resources can be registered and described by data providers for discovery by users. We are currently using the ESRI Geoportal (Open Source), with configuration files for the USGIN profile. The metadata offered by the catalog must provide sufficient content to guide search engines to locate requested resources, to describe the resource content, provenance, and quality so users can determine if the resource will serve for intended usage, and finally to enable human users and sofware clients to obtain or access the resource. In order to achieve an operational federated catalog system, provisions in the ISO specification must be restricted and usage clarified to reduce the heterogeneity of 'standard' metadata and service implementations such that a single client can search against different catalogs, and the metadata returned by catalogs can be parsed reliably to locate required information. Usage of the complex ISO 19139 XML schema allows for a great deal of structured metadata content, but the heterogenity in approaches to content encoding has hampered development of sophisticated client software that can take advantage of the rich metadata; the lack of such clients in turn reduces motivation for metadata producers to produce content-rich metadata. If the only significant use of the detailed, structured metadata is to format into text for people to read, then the detailed information could be put in free text elements and be just as useful. In order for complex metadata encoding and content to be useful, there must be clear and unambiguous conventions on the encoding that are utilized by the community that wishes to take advantage of advanced metadata content. The use cases for the detailed content must be well understood, and the degree of metadata complexity should be determined by requirements for those use cases. The ISO standard provides sufficient flexibility that relatively simple metadata records can be created that will serve for text-indexed search/discovery, resource evaluation by a user reading text content from the metadata, and access to the resource via http, ftp, or well-known service protocols (e.g. Thredds; OGC WMS, WFS, WCS).

A cross-sectional study of the presence of United Kingdom (UK) plastic surgeons on social media.

PubMed

Mabvuure, Nigel Tapiwa; Rodrigues, Jeremy; Klimach, Stefan; Nduka, Charles

2014-03-01

To determine the uptake and usage of websites and social media (SM) by UK consultant (attending) plastic surgeons. Professional profiles of full BAPRAS members were searched on Facebook, Twitter, LinkedIn, RealSelf, YouTube, ResearchGate in May 2013. Additional surgeons were identified from the follower lists of @BAPRASvoice and @BAAPSMedia. Website ownership was determined on Google. Searches were repeated three times. Dual BAAPS-BAPRAS members were identified from www.baaps.org.uk. There were 156 (48.3%) dual BAAPS-BAPRAS members and 36 BAPRAS-only members. Fifty seven (18%) surgeons had no account on any platform whereas 266 (82%) were on at least one platform. One hundred and sixty four (51%) had personal websites whilst 37 (11%) had profiles on partnership websites. One hundred and sixteen (36%) had no website presence whilst 2% had websites under construction. The platform most surgeons use is LinkedIn (52%) whilst smaller proportions used Facebook (4%) and Twitter (22%). Surgeons had a mean of 126 (range: 0-3270) Twitter followers and 368 (range: 7-3786) fans/'likes' of their Facebook profiles. Time spent in postgraduate practice was not predictive of website ownership or SM use. However, dual BAAPS-BAPRAS members were significantly more likely to own a personal website, Twitter, RealSelf and YouTube accounts. There has been an increase in the uptake of social media by UK plastic surgeons, especially in those with aesthetic surgery interests. However, very few surgeons have optimised their web presence. Continued education and appropriate usage guidance may promote uptake, particularly by reconstructive surgeons. Copyright © 2013 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Profiles of women presenting for abortions in Singapore: focus on teenage abortions and late abortions.

PubMed

Lim, Limin; Wong, Hungchew; Yong, Euleong; Singh, Kuldip

2012-02-01

Teenage abortions predispose women to adverse pregnancy outcomes in subsequent pregnancies such as anemia, stillbirths, preterm deliveries and low birth weight babies. We aim to profile the women presenting for abortions in our institution and determine risk factors for late presentation for abortions. In this retrospective cohort study, all women who underwent an abortion at the National University Hospital, Singapore, from 2005 to 2009 were recruited. Data was obtained from a prepared questionnaire during the mandatory pre-abortion counseling sessions. Profiles of women aged <20 years were compared with those ≥ 20 years old using Chi-square test if the assumptions for Chi-square test were met; otherwise, Fisher's exact test was carried out. Logistic regression was used to investigate the risk factors for second trimester termination of pregnancy. 2109 women presented for induced abortions, of which 1998 had single abortion throughout the course of the study. The mean age of women with single abortion was 29.1 years (sd 7). In the group of women with single abortion, 182 (9.1%) were teenage abortions. In contrast to women ≥ 20 years of age, pregnant teenagers were more likely not to have used any contraception (51.1% vs. 25.2%) and more likely to present late for abortions (39.6% vs. 15.9%). Other risk factors for late presentation for abortions include Malay ethnicity, singlehood, nulliparity and lack of prior usage of contraception. Teenagers are more likely to have no prior contraceptive usage and to present late for abortions. Lack of proper sexual education and awareness of contraceptive measures may have a major contributory factor to such a trend in teenage abortions. Recommendations have been made in order to curb this societal problem. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

ADA Title I allegations and the Mining, Quarrying, and Oil/Gas Extraction industry.

PubMed

Van Wieren, Todd A; Rhoades, Laura; McMahon, Brian T

2017-01-01

The majority of research about employment discrimination in the U.S. Mining, Quarrying, and Oil/Gas (MQOGE) industries has concentrated on gender and race, while little attention has focused on disability. To explore allegations of Americans with Disabilities Act (ADA) Title I discrimination made to the Equal Employment Opportunity Commission (EEOC) by individuals with disabilities against MQOGE employers. Key data available to this study included demographic characteristics of charging parties, size of employers, types of allegations, and case outcomes. Using descriptive analysis, allegation profiles were developed for MQOGE's three main sectors (i.e., Oil/Gas Extraction, Mining except Oil/Gas, and Support Activities). These three profiles where then comparatively analyzed. Lastly, regression analysis explored whether some of the available data could partially predict MQOGE case outcomes. The predominant characteristics of MQOGE allegations were found to be quite similar to the allegation profile of U.S. private-sector industry as a whole, and fairly representative of MQOGE's workforce demographics. Significant differences between MQOGE's three main sector profiles were noted on some important characteristics. Lastly, it was found that MQOGE case outcomes could be partially predicted via some of the available variables. The study's limitations were presented and recommendations were offered for further research.

Hot air vulcanization of rubber profiles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerlach, J.

1995-07-01

Elastomer profiles are deployed in quantity by the automobile industry as seals and wateproofing in coachwork. The high standards demanded by the industry; improvement in weather prediction, noise reduction, restriction of tolerances, together with powerful demand for EPDM force the rubber processing industry into development, particularly of elastomers. Complex proofing systems must also be achieved with extremely complicated profile forms. All too often such profiles have an extremely large surface together with a low cross-section density. They frequently consist of two or three rubber compounds and are steel reinforced. Sometimes they are flocked and coated with a low friction finish.more » Such high-tech seals require an adjustment of the vulcanization method. The consistent trend in the nineties towards lower quantities of elastomer per sealing unit and the dielectric factor, especially with EPDM, has brought an old fashioned vulcanization method once more to the fore, a method developed over the past years to an extremely high standard, namely the hot-air method. This paper describes various vulcanization and curing methods and their relative merits and disadvantages, the Gerlach hot-air concept, the hot air installation concept, and energy saving and efficiency afforded by this technique. 4 figs.« less

Occupational Profiles in the European Steel Industry.

ERIC Educational Resources Information Center

Franz, Hans-Werner; And Others

The steel industry in Europe has faced great changes, with resulting layoffs and restructuring. Now that the most basic changes seem to be over, it has become evident that the remaining steel industry requires more highly trained workers than was the case previously. Although steel maintenance employees were always highly skilled, steel production…

Consulting Careers: A Profile of Three Occupations

ERIC Educational Resources Information Center

Mullins, John

2011-01-01

Choosing an industry in which to work is often as important as choosing an occupation. And over the next several years, the best advice for some workers may be to choose an industry that sells advice: consulting. The management, scientific, and technical consulting services industry comprises businesses that offer specialized advice to other…

Modeling & Verifying Aircraft Paint Hangar Airflow to Reduce Green House Gas and Energy Usage while Protecting Occupational Health Energy

DTIC Science & Technology

2015-05-30

provides a smnmaty of results from the site visits and discusses areas of potential future research. 1S. SUBJECT TERMS Aircraft Paint Hangar...Airlift Wing ACCPFF ACGIH Aircraft Corrosion Control and Paint Finishing Facility American Conference of Governmental Industrial Hygienists ACS Cross...velocity did not increase exposure resulted in an interest in expanding the project to encompass more sites around the U.S. with support from the

Health Hazards of Xylene: A Literature Review

PubMed Central

T. Rajan, Sharada; Malathi, N.

2014-01-01

Xylene, an aromatic hydrocarbon is widely used in industry and medical laboratory as a solvent. It is a flammable liquid that requires utmost care during its usage. On exposure the vapours are rapidly absorbed through the lungs and the slowly through the skin. Prolonged exposure to xylene leads to significant amount of solvent accumulation in the adipose and muscle tissue. This article reviews the various acute and chronic health effects of xylene through various routes of exposure. PMID:24701554

Health hazards of xylene: a literature review.

PubMed

T Rajan, Sharada; Malathi, N

2014-02-01

Xylene, an aromatic hydrocarbon is widely used in industry and medical laboratory as a solvent. It is a flammable liquid that requires utmost care during its usage. On exposure the vapours are rapidly absorbed through the lungs and the slowly through the skin. Prolonged exposure to xylene leads to significant amount of solvent accumulation in the adipose and muscle tissue. This article reviews the various acute and chronic health effects of xylene through various routes of exposure.

An Overview of the AAVSO's Information Technology Infrastructure From 1967 to 1997

NASA Astrophysics Data System (ADS)

Kinne, R. C. S.

2012-06-01

Computer technology and data processing swept both society and the sciences like a wave in the latter half of the 20th century. We trace the AAVSO’s usage of computational and data processing technology from its beginnings in 1967, through 1997. We focus on equipment, people, and the purpose such computational power was put to, and compare and contrast the organization’s use of hardware and software with that of the wider industry.

Usage of information safety requirements in improving tube bending process

NASA Astrophysics Data System (ADS)

Livshitz, I. I.; Kunakov, E.; Lontsikh, P. A.

2018-05-01

This article is devoted to an improvement of the technological process's analysis with the information security requirements implementation. The aim of this research is the competition increase analysis in aircraft industry enterprises due to the information technology implementation by the example of the tube bending technological process. The article analyzes tube bending kinds and current technique. In addition, a potential risks analysis in a tube bending technological process is carried out in terms of information security.

Traffic model for commercial payloads in the Materials Experiment Assembly (MEA). [market research in commercial space processing

NASA Technical Reports Server (NTRS)

Tietzel, F. A.

1979-01-01

One hundred individuals representing universities, technical institutes, government agencies, and industrial facilities were surveyed to determine potential commercial use of a self-contained, automated assembly for the space processing of materials during frequent shuttle flights for the 1981 to 1987 period. The approach used and the results of the study are summarized. A time time-phased projection (traffic model) of commercial usage of the materials experiment assembly is provided.

Environmental issues elimination through circular economy

NASA Astrophysics Data System (ADS)

Špirková, M.; Pokorná, E.; Šujanová, J.; Samáková, J.

2016-04-01

Environmental efforts of European Union are currently going towards circular economy. Tools like Extended Producer Responsibility and Eco-design were established. The circular economy deals with resources availability issue on one hand and waste management on the other hand. There are few pioneering companies all over the world with some kind of circular economy practice. Generally the concept is not very wide-spread. The paper aims to evaluate possibility of transition towards circular economy in Slovak industrial companies. They need to have an active approach to material treatment of their products after usage stage. Innovation is another important pre-condition for the transition. Main problem of current cradle to grave system is landfilling of valuable materials after one cycle of usage. Their potential value for next manufacturing cycles is lost. Companies may do not see connection between waste management and material resource prices and volatility of supplies. Municipalities are responsible for municipal waste collection and treatment in Slovakia. The circular economy operates by cradle to cradle principle. Company manages material flow until the material comes back to the beginning of manufacturing process by itself or by another partners. Stable material supplies with quite low costs are provided this way. It is necessary to deal with environmental problems in phase of product design. Questionnaire survey results show on one hand low involvement of industrial companies in waste management area, however on the other hand they are open to environmental innovations in future.

Rotorcraft fatigue life-prediction: Past, present, and future

NASA Technical Reports Server (NTRS)

Everett, Richard A., Jr.; Elber, W.

1994-01-01

In this paper the methods used for calculating the fatigue life of metallic dynamic components in rotorcraft is reviewed. In the past, rotorcraft fatigue design has combined constant amplitude tests of full-scale parts with flight loads and usage data in a conservative manner to provide 'safe life' component replacement times. This is in contrast to other industries, such as the automobile industry, where spectrum loading in fatigue testing is a part of the design procedure. Traditionally, the linear cumulative damage rule has been used in a deterministic manner using a conservative value for fatigue strength based on a one in a thousand probability of failure. Conservatism on load and usage are also often employed. This procedure will be discussed along with the current U.S. Army fatigue life specification for new rotorcraft which is the so-called 'six nines' reliability requirement. In order to achieve the six nines reliability requirement the exploration and adoption of new approaches in design and fleet management may also be necessary if this requirement is to be met with a minimum impact on structural weight. To this end a fracture mechanics approach to fatigue life design may be required in order to provide a more accurate estimate of damage progression. Also reviewed in this paper is a fracture mechanics approach for calculating total fatigue life which is based on a crack-closure small crack considerations.

Mask industry assessment trend analysis: 2010

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2010-05-01

Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply as top critical issues. A survey was designed with input from semiconductor company mask technologists and merchant mask suppliers and support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's assessment was the eighth in the current series of annual reports. Its data were presented in detail at BACUS, and the detailed trend analysis is presented at EMLC. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. Its results will be used to guide future investments on critical path issues. This year's survey is basically the same as the surveys in 2005 through 2009. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry.

Electronic health record usage behaviors in primary care medical practices: A survey of family physicians in Canada.

PubMed

Paré, Guy; Raymond, Louis; Guinea, Ana Ortiz de; Poba-Nzaou, Placide; Trudel, Marie-Claude; Marsan, Josianne; Micheneau, Thomas

2015-10-01

The importance and potential value of office-based electronic health record (EHR) systems is being recognized internationally. We thus sought to better understand how EHRs are actually being used by family physicians and what they perceive to be the main performance outcomes for themselves and their medical practices. We conducted a survey of family physicians practicing in medical practices in Quebec, Canada (n =331). Bivariate and multivariate statistical analyses were conducted to characterize EHR usage behaviors and assess the perceived performance outcomes of these systems. EHR systems "as-used" vary substantively from one family physician to another in terms of the capabilities that are actually mobilized by them. Significant differences between "basic" and "advanced" users were observed in terms of the EHR system's characteristics and perceived performance outcomes. Physicians were also clustered under three profiles that could be clearly distinguished from one another, in terms of the extent to which their performance and their practice's performance was impacted by their EHR usage. Physicians that are "highly impacted" by their EHR system are those who have the longest usage experience and make the most extended use of their system's capabilities. Our study indicates that only a minority of family physicians in our sample use most of the features available in their EHR system. Consequently, few physicians perceive gaining significant performance improvements from such systems. Future research must identify the factors that motivate primary care physicians to assimilate EHR systems in a more extensive manner. Copyright © 2015. Published by Elsevier Ireland Ltd.

Tissue distribution of HCH and DDT congeners and human health risk associated with consumption of fish collected from Kabul River, Pakistan.

PubMed

Aamir, Muhammad; Khan, Sardar; Nawab, Javed; Qamar, Zahir; Khan, Anwarzeb

2016-03-01

Distribution of hexachlorocyclohexane (HCH) and dichlorodiphenyltrichloroethane (DDT) congeners in tissues of four different fish species and their associated potential health risks to local consumers are presented in this paper. The average ∑(HCHs+DDTs) concentration in Glyptothorax punjabensis (214ngg(-1) wet weight (ww)) (carnivores) was found higher than Tor putitora (155ngg(-1) ww) (herbivores). The distribution of ∑(HCHs+DDTs) in all fish tissues was found in order of liver>muscle>stomach>gills. The profile of congeners (β-HCH/∑HCH from 0.29-0.47) indicated that all selected fish species were contaminated with HCH because of its recent usage in the study area. Furthermore, DDT profile ((DDE+DDD)/∑DDT from 0.61-0.78) showed that fish contamination with DDT originated from past usage and long-time degradation mechanism. The average estimated daily dietary intake of ∑HCHs (15.0ngkg(-1) day(-1)) was higher than ∑DDTs (12.5ngkg(-1) day(-1)) by the local consumers via fish consumption. On the basis of both 50th and 95th percentile exposure levels, the carcinogenic hazard ratios for DDT and its congeners were exceeded one (safe limit) for all fish species, indicating a great potential cancer risk for local consumers with life time consumption of contaminated fish collected from Kabul River. Copyright © 2015 Elsevier Inc. All rights reserved.

Usage of Complementary Medicine in Switzerland: Results of the Swiss Health Survey 2012 and Development Since 2007

PubMed Central

Klein, Sabine D.; Torchetti, Loredana; Frei-Erb, Martin; Wolf, Ursula

2015-01-01

Background Complementary medicine (CM) is popular in Switzerland. Several CM methods (traditional Chinese medicine/acupuncture, homeopathy, anthroposophic medicine, neural therapy, and herbal medicine) are currently covered by the mandatory basic health insurance when performed by a certified physician. Treatments by non-medical therapists are partially covered by a supplemental and optional health insurance. In this study, we investigated the frequency of CM use including the evolvement over time, the most popular methods, and the user profile. Methods Data of the Swiss Health Surveys 2007 and 2012 were used. In 2007 and 2012, a population of 14,432 and 18,357, respectively, aged 15 years or older answered the written questionnaire. A set of questions queried about the frequency of use of various CM methods within the last 12 months before the survey. Proportions of usage and 95% confidence intervals were calculated for these methods and CM in general. Users and non-users of CM were compared using logistic regression models. Results The most popular methods in 2012 were homeopathy, naturopathy, osteopathy, herbal medicine, and acupuncture. The average number of treatments within the 12 months preceding the survey ranged from 3 for homeopathy to 6 for acupuncture. 25.0% of the population at the age of 15 and older had used at least one CM method in the previous 12 months. People with a chronic illness or a poor self-perceived health status were more likely to use CM. Similar to other countries, women, people of middle age, and those with higher education were more likely to use CM. 59.9% of the adult population had a supplemental health insurance that partly covered CM treatments. Conclusions Usage of CM in Switzerland remained unchanged between 2007 and 2012. The user profile in Switzerland was similar to other countries, such as Germany, United Kingdom, United States or Australia. PMID:26513370

Internet Usage In The Fresh Produce Supply Chainin China

NASA Astrophysics Data System (ADS)

Xu, Xiaoxiao; Duan, Yanqing; Fu, Zetian; Liu, Xue

Although effective implementation of the Internet technologies has a great potential for improving efficiency and reducing wastage within the fresh produce supply chain. the situation of the Internet usage by SMEs (small and medium sized enterprises) in the fresh produce supply chain is still unclear in China. As the main players, SMEs haven't been given enough attention from both academics and governments. Therefore, this research attempts to address this issue by, first, investigating the current usage of the Internet and related software by Chinese SMEs in the fresh produce supply chain, and then, by identifying enablers and barriers faced by SMEs to call government's attention. As a part of an EU-Asia IT&C funded project, a survey was carried out with SMEs in this industry from five major cities in China. The results reveal that in the relatively developed areas of China, SMEs in the fresh produce supply chain are rapidly adopting the Internet and software packages, but the level of adoption varies greatly and there is a significant lack of integration among the supply chain partners. Chinese SMEs are keen to embrace emerging technologies and have acted to adopt new software and tools. Given that cost of implementation is not a barrier, their concern over legal protection and online security must be addressed for further development.

Evaluation of cysteine ethyl ester as efficient inducer for glutathione overproduction in Saccharomyces spp.

PubMed

Lorenz, Eric; Schmacht, Maximilian; Senz, Martin

2016-11-01

Economical yeast based glutathione (GSH) production is a process that is influenced by several factors like raw material and production costs, biomass production and efficient biotransformation of adequate precursors into the final product GSH. Nowadays the usage of cysteine for the microbial conversion into GSH is industrial state of practice. In the following study, the potential of different inducers to increase the GSH content was evaluated by means of design of experiments methodology. Investigations were executed in three natural Saccharomyces strains, S. cerevisiae, S. bayanus and S. boulardii, in a well suited 50ml shake tube system. Results of shake tube experiments were confirmed in traditional baffled shake flasks and finally via batch cultivation in lab-scale bioreactors under controlled conditions. Comprehensive studies showed that the usage of cysteine ethyl ester (CEE) for the batch-wise biotransformation into GSH led up to a more than 2.2 times higher yield compared to cysteine as inducer. Additionally, the intracellular GSH content could be significantly increased for all strains in terms of 2.29±0.29% for cysteine to 3.65±0.23% for CEE, respectively, in bioreactors. Thus, the usage of CEE provides a highly attractive inducing strategy for the GSH overproduction. Copyright © 2016 Elsevier Inc. All rights reserved.

Use of Over-the-Counter Medication among Pregnant Women in Sharjah, United Arab Emirates

PubMed Central

Mustafa, Hafsa

2017-01-01

Background Over-the-counter medications are widely available in pharmacies Their safety profile, however, does not extend to pregnant women. Accordingly, there should be educational programs developed for pregnant women to protect them from the harms of the side effects. Aim This study was planned and designed with the aim of exploring the awareness and assessing the usage of OTC medications among pregnant women in Sharjah, UAE. Method A cross-sectional survey using a self-administered questionnaire. Results More than three-quarters (75.7%) reported that they are familiar with the term “over-the-counter drugs.” Interestingly, 40% of the respondents reported that they took OTC drugs during pregnancy, and the majority (94.2%) agreed with the survey statement “not all OTC medications are safe to be taken during pregnancy.” Constipation was the most frequent side effect that most of the participants reported during the study period. Folic acid (36%), calcium (28.6%), and iron (35.1%) were the most common supplements used by the pregnant women responding. Conclusion The reported 40% usage of OTC medications among pregnant women in this study is worrisome and calls for the need to educate, counsel, and increase awareness among pregnant women regarding the dangers of OTC drugs usage while pregnant in Sharjah, UAE. PMID:28804652

Repositioning of drugs using open-access data portal DTome: A test case with probenecid (Review).

PubMed

Ahmed, Mohammad U; Bennett, Dylan J; Hsieh, Tze-Chen; Doonan, Barbara B; Ahmed, Saba; Wu, Joseph M

2016-01-01

The one gene-one enzyme hypothesis, first introduced by Beadle and Tatum in the 1940s and based on their genetic analysis and observation of phenotype changes in Neurospora crassa challenged by various experimental conditions, has witnessed significant advances in recent decades. Much of our understanding of the association between genes and their phenotype expression has benefited from the completion of the human genome project, and has shown continual transformation guided by the effort directed at the annotation and characterization of human genes. Similarly, the idea of one drug‑one primary disease indication that traditionally has been the benchmark for the labeling and usage of drugs has also undergone evident progressive refinements; in recent years the science and practice of pharmaceutical development has notable success in the strategy of drug repurposing. Drug repurposing is an innovative approach where, instead of de novo synthesis and discovery of new drugs with novel indications, drug candidates with the desired usage are identified by a process of re‑profiling using an open‑source database or knowledge of known or failed drugs already in existence. In the present study, the repurposing drug strategy employing open‑access data portal drug‑target interactome (DTome) is applied to the uncovering of new clinical usage for probenecid.

Assessment of On-Site Power Opportunities in the Industrial Sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bryson, T.

2001-10-08

The purpose of this report is to identify the potential for on-site power generation in the U.S. industrial sector with emphasis on nine industrial groups called the ''Industries of the Future'' (IOFs) by the U.S. Department of Energy (DOE). Through its Office of Industrial Technologies (OIT), the DOE has teamed with the IOFs to develop collaborative strategies for improving productivity, global competitiveness, energy usage and environmental performance. Total purchases for electricity and steam for the IOFs are in excess of $27 billion annually. Energy-related costs are very significant for these industries. The nine industrial groups are (1) Agriculture (SIC 1);more » (2) Forest products; (3) Lumber and wood products (SIC 24); (4) Paper and allied products (SIC 26); (5) Mining (SIC 11, 12, 14); (6) Glass (SIC 32); (7) Petroleum (SIC 29); (8) Chemicals (SIC 28); and (9) Metals (SIC 33): Steel, Aluminum, and Metal casting. Although not currently part of the IOF program, the food industry is included in this report because of its close relationship to the agricultural industry and its success with on-site power generation. On-site generation provides an alternative means to reduce energy costs, comply with environmental regulations, and ensure a reliable power supply. On-site generation can ease congestion in the local utility's electric grid. Electric market restructuring is exacerbating the price premium for peak electricity use and for reliability, creating considerable market interest in on-site generation.« less

Organochlorines in free-range hen and duck eggs from Shanghai: occurrence and risk assessment.

PubMed

Xu, Meng; Qiu, Yanling; Bignert, Anders; Zhou, Yihui; Zhu, Zhiliang; Zhao, Jianfu

2015-02-01

As an important part of the residents' diet in China, the consumption of hen and duck eggs has been increasing rapidly in the past decades. Being rich in protein and lipid, eggs may be one of the main exposure routes for persistent organic pollutants (POPs) to human beings. In this study, four kinds of free-range hen and duck eggs were collected from two traditional egg-producing areas in Shanghai, namely Dianshan Lake Area and Jinshan Industry Zone. Organochlorine pesticides (OCPs, 18 compounds) and polychlorinated biphenyls (PCBs, 14 compounds) were analyzed with 41 egg samples. Among all OCPs, dichlorodiphenyltrichloroethanes (DDTs) were the dominant contaminant, with the concentrations ranging from 100 to 730 ng/g, lw. Unlike the 4,4'-DDE as the predominant DDTs congener in other three kinds of eggs, the duck eggs from Jinshan Industrial Zone had an abnormally high concentration of 2,4'-DDD, which may be related to ducks' feedings in the water. The levels of hexachlorocyclohexanes (HCHs) and pentachloroanisole (PCA) in eggs from different places were similar to each other, while hexchlorobenzene (HCB) for hen eggs from Dianshan Lake was much higher than other eggs. According to the results, the DDTs residues detected in this study were mainly due to the historical usage, whereas the high ratio of γ-HCH/α-HCH suggested that there might be some recent input of lindane in these two areas. For PCBs, the congener profiles varied among species. Low molecular PCBs (Tri-PCBs and Tetra-PCBs) were main congeners for duck eggs from Dianshan Lake and all hen eggs, while high molecular PCBs accounted for more than 50 % for duck eggs from Jinshan Industrial Zone, which was consistent with the water analysis results of the synchronous study from our group. This study suggests that Dianshan Lake Area may not be a good reference area for POPs monitoring in Shanghai. The estimated daily intakes of DDTs, HCHs, HCBs, and PCBs were far below the reference limits, showing no significant health risk for human consumption by eating eggs collected in this study.

Application of game theory in decision making strategy: Does gas fuel industry need to kill oil based fuel industry?

NASA Astrophysics Data System (ADS)

Azmi, Abdul Luky Shofi'ul; Prabandari, Dyah Lusiana; Hakim, Muhammad Lintang Islami

2017-03-01

Even though conversion of oil based fuel (Bahan Bakar Minyak) into gas fuel (Bahan Bakar Gas) for transportation (both land and sea) is one of the priority programs of the government of Indonesia, rules that have been established merely basic rules of gas fuel usage license for transportation, without discussing position of gas fuel related to oil based fuel in detail. This paper focus on possible strategic behavior of the key players in the oil-gas fuel conversion game, who will be impacted by the position of gas fuel as complement or substitution of oil based fuel. These players include industry of oil based fuel, industry of gas fuel, and the government. Modeling is made based on two different conditions: government plays a passive role and government plays an active role in legislating additional rules that may benefit industry of gas fuel. Results obtained under a passive government is that industry of oil based fuel need to accommodate the presence of industry of gas fuel, and industry of gas fuel does not kill/ eliminate the oil based fuel, or gas fuel serves as a complement. While in an active government, the industry of oil based fuel need to increase its negotiation spending in the first phase so that the additional rule that benefitting industry of gas fuel would not be legislated, while industry of gas fuel chooses to indifferent; however, in the last stage, gas fuel turned to be competitive or choose its role to be substitution.

Mask industry assessment: 2009

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2009-10-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by David Powell Consulting to gather information about the mask industry as an objective assessment of its overall condition. The survey is designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the eighth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey is basically the same as the 2005 through 2008 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that create a detailed profile of both the business and technical status of the critical mask industry. This in combination with the past surveys represents a comprehensive view of changes in the industry.

Alcohol Marketing on Twitter and Instagram: Evidence of Directly Advertising to Youth/Adolescents.

PubMed

Barry, Adam E; Bates, Austin M; Olusanya, Olufunto; Vinal, Cystal E; Martin, Emily; Peoples, Janiene E; Jackson, Zachary A; Billinger, Shanaisa A; Yusuf, Aishatu; Cauley, Daunte A; Montano, Javier R

2016-07-01

Assess whether alcohol companies restrict youth/adolescent access, interaction, and exposure to their marketing on Twitter and Instagram. Employed five fictitious male and female Twitter (n = 10) and Instagram (n = 10) user profiles aged 13, 15, 17, 19 and/or 21. Using cellular smartphones, we determined whether profiles could (a) interact with advertising content-e.g. retweet, view video or picture content, comment, share URL; and/or (b) follow and directly receive advertising material updates from the official Instagram and Twitter pages of 22 alcohol brands for 30 days. All user profiles could fully access, view, and interact with alcohol industry content posted on Instagram and Twitter. Twitter's age-gate, which restricts access for those under 21, successfully prevented underage profiles from following and subsequently receiving promotional material/updates. The two 21+ profiles collectively received 1836 alcohol-related tweets within 30 days. All Instagram profiles, however, were able to follow all alcohol brand pages and received an average of 362 advertisements within 30 days. The quantity of promotional updates increased throughout the week, reaching their peak on Thursday and Friday. Representatives/controllers of alcohol brand Instagram pages would respond directly to our underage user's comments. The alcohol industry is in violation of their proposed self-regulation guidelines for digital marketing communications on Instagram. While Twitter's age-gate effectively blocked direct to phone updates, unhindered access to post was possible. Everyday our fictitious profiles, even those as young as 13, were bombarded with alcohol industry messages and promotional material directly to their smartphones. © The Author 2015. Medical Council on Alcohol and Oxford University Press. All rights reserved.

Intelligent robot trends for 1998

NASA Astrophysics Data System (ADS)

Hall, Ernest L.

1998-10-01

An intelligent robot is a remarkably useful combination of a manipulator, sensors and controls. The use of these machines in factory automation can improve productivity, increase product quality and improve competitiveness. This paper presents a discussion of recent technical and economic trends. Technically, the machines are faster, cheaper, more repeatable, more reliable and safer. The knowledge base of inverse kinematic and dynamic solutions and intelligent controls is increasing. More attention is being given by industry to robots, vision and motion controls. New areas of usage are emerging for service robots, remote manipulators and automated guided vehicles. Economically, the robotics industry now has a 1.1 billion-dollar market in the U.S. and is growing. Feasibility studies results are presented which also show decreasing costs for robots and unaudited healthy rates of return for a variety of robotic applications. However, the road from inspiration to successful application can be long and difficult, often taking decades to achieve a new product. A greater emphasis on mechatronics is needed in our universities. Certainly, more cooperation between government, industry and universities is needed to speed the development of intelligent robots that will benefit industry and society.

Determinants of RFID adoption in Malaysia's healthcare industry: occupational level as a moderator.

PubMed

Zailani, Suhaiza; Iranmanesh, Mohammad; Nikbin, Davoud; Beng, Jameson Khoo Cheong

2015-01-01

With today's highly competitive market in the healthcare industry, Radio Frequency Identification (RFID) is a technology that can be applied by hospitals to improve operational efficiency and to gain a competitive advantage over their competitors. The purpose of this study is to investigate the factors that may effect RFID adoption in Malaysia's healthcare industry. In addition, the moderating role of occupational level was tested. Data was collected from 223 managers as well as healthcare and supporting staffs. This data was analyzed using the partial least squares technique. The results show that perceived ease of use and usefulness, government policy, top management support, and security and privacy concerns have an effect on the intent to adopt RFID in hospitals. There is a wide gap between managers and healthcare staff in terms of the factors that influence RFID adoption. The results of this study will help decision makers as well as managers in the healthcare industry to better understand the determinants of RFID adoption. Additionally, it will assist in the process of RFID adoption, and therefore, spread the usage of RFID technology in more hospitals.

Healthcare associated infections in neonatal intensive care unit and its correlation with environmental surveillance.

PubMed

Kumar, Sanjay; Shankar, Binoy; Arya, Sugandha; Deb, Manorma; Chellani, Harish

Healthcare-associated infections (HAI) are frequent complications in neonatal intensive care units (NICU) with varying risk factors and bacteriological profile. There is paucity of literature comparing the bacteriological profile of organisms causing HAI with the environmental surveillance isolates. Therefore, this study aimed to evaluate demographic profile, risk factors and outcome of HAI in NICU and correlate with environmental surveillance. Three hundred newborns with signs and symptoms of sepsis were enrolled in the study group and their profile, risk factors and outcome were compared with the control group. Univariate analysis and multivariable logistic regression were performed. Environmental surveillance results were compared to the bacteriological profile of HAIs. We identified lower gestational age, male gender and apgar score less than 7 at 5min, use of peripheral vascular catheter & ventilator along with their duration as significant risk factors. Mortality rate was 29% in the study group (p<0.05). The HAI site distribution showed blood-stream infections (73%) to be the most common followed by pneumonia (12%) and meningitis (10%). Gram positive cocci were the most common isolates in HAI as well as environmental surveillance. The bacteriological profile of HAI correlates with the environmental surveillance report thus insisting for periodic surveillance and thereby avoiding irrational antibiotic usage. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

"Are we Facebook official?" Implications of dating partners' Facebook use and profiles for intimate relationship satisfaction.

PubMed

Papp, Lauren M; Danielewicz, Jennifer; Cayemberg, Crystal

2012-02-01

Extending previous research on positive and negative correlates of Facebook use for individuals' outcomes, this study examined male and female dating partners' (n=58 couples) Facebook use and portrayals of their intimate relationship on the Facebook profile. Confirming hypotheses from compatibility theories of mate selection, partners demonstrated similar Facebook intensity (e.g., usage, connection to Facebook), and were highly likely to portray their relationship on their Facebook profiles in similar ways (i.e., display partnered status and show their partner in profile picture). These Facebook profile choices played a role in the overall functioning of the relationship, with males' indications of a partnered status linked with higher levels of their own and their partners' (marginal) relationship satisfaction, and females' displays of their partner in their profile picture linked with higher levels of their own and their partners' relationship satisfaction. Finally, male and female reports of having had disagreements over the Facebook relationship status was associated with lower level of females' but not males' relationship satisfaction, after accounting for global verbal conflict. Thus, the findings point to the unique contribution of Facebook disagreements to intimate relationship functioning. Results from this study encourage continued examination of technology use and behaviors in contexts of intimate relationships.

Application Profiling for Rural Communities: eGov Services and Training Resources in Rural Inclusion

NASA Astrophysics Data System (ADS)

Karamolegkos, Pantelis; Maroudas, Axel; Manouselis, Nikos

Metadata plays a critical role in the design and development of online repositories. The efficiency and ease of use of the repositories are directly associated with the metadata structure, since end-user functionalities such as search, retrieval and access are highly dependent on how the metadata schema and application profile have been conceptualized and implemented. The need for efficient and interoperable application profiles is even more substantial when it comes to services related to the e-government (eGov) paradigm, given a) the close association between services related to eGov and the metadata usage and b) the fact that the eGov concept is associated with time and cost critical processes, i.e. interaction of citizens and services with public authorities. In this paper, we outline an effort related to application profiling for eGov services and training resources, used in the platform of RuralObservatory2.0, which will underpin a major objective of the ICT PSP Rural Inclusion project, i.e. the eGov paradigm uptake by rural communities.

Social capital and Internet use in an age-comparative perspective with a focus on later life.

PubMed

Barbosa Neves, Barbara; Fonseca, Jaime R S; Amaro, Fausto; Pasqualotti, Adriano

2018-01-01

Older adults (aged 65+) are still less likely to adopt the Internet when compared to other age groups, although their usage is increasing. To explore the societal effects of Internet usage, scholars have been using social capital as an analytical tool. Social capital pertains to the resources that are potentially available in one's social ties. As the Internet becomes a prominent source of information, communication, and participation in industrialized countries, it is critical to study how it affects social resources from an age-comparative perspective. Research has found a positive association between Internet use and social capital, though limited attention has been paid to older adults. Studies have also found a positive association between social capital and wellbeing, health, sociability, and social support amongst older adults. However, little is known about how Internet usage or lack thereof relates to their social capital. To address this gap, we used a mixed-methods approach to examine the relationship between Internet usage and social capital and whether and how it differs by age. For this, we surveyed a representative sample of 417 adults (18+) living in Lisbon, Portugal, of which 118 are older adults. Social capital was measured through bonding, bridging, and specific resources, and analyzed with Latent Class Modeling and logistic regressions. Internet usage was measured through frequency and type of use. Fourteen follow-up semi-structured interviews helped contextualize the survey data. Our findings show that social capital decreased with age but varied for each type of Internet user. Older adults were less likely to have a high level of social capital; yet within this age group, frequent Internet users had higher levels than other users and non-users. On the one hand, the Internet seems to help maintain, accrue, and even mobilize social capital. On the other hand, it also seems to reinforce social inequality and accumulated advantage (known as the Matthew effect).

Social capital and Internet use in an age-comparative perspective with a focus on later life

PubMed Central

Amaro, Fausto; Pasqualotti, Adriano

2018-01-01

Older adults (aged 65+) are still less likely to adopt the Internet when compared to other age groups, although their usage is increasing. To explore the societal effects of Internet usage, scholars have been using social capital as an analytical tool. Social capital pertains to the resources that are potentially available in one’s social ties. As the Internet becomes a prominent source of information, communication, and participation in industrialized countries, it is critical to study how it affects social resources from an age-comparative perspective. Research has found a positive association between Internet use and social capital, though limited attention has been paid to older adults. Studies have also found a positive association between social capital and wellbeing, health, sociability, and social support amongst older adults. However, little is known about how Internet usage or lack thereof relates to their social capital. To address this gap, we used a mixed-methods approach to examine the relationship between Internet usage and social capital and whether and how it differs by age. For this, we surveyed a representative sample of 417 adults (18+) living in Lisbon, Portugal, of which 118 are older adults. Social capital was measured through bonding, bridging, and specific resources, and analyzed with Latent Class Modeling and logistic regressions. Internet usage was measured through frequency and type of use. Fourteen follow-up semi-structured interviews helped contextualize the survey data. Our findings show that social capital decreased with age but varied for each type of Internet user. Older adults were less likely to have a high level of social capital; yet within this age group, frequent Internet users had higher levels than other users and non-users. On the one hand, the Internet seems to help maintain, accrue, and even mobilize social capital. On the other hand, it also seems to reinforce social inequality and accumulated advantage (known as the Matthew effect). PMID:29481556

Defining a mismatch: differences in usage of social networking sites between medical students and the faculty who teach them.

PubMed

Brisson, Gregory E; Fisher, Matthew J; LaBelle, Mark W; Kozmic, Sarah E

2015-01-01

Use of social networking sites (SNS) by medical students is increasing, and some students lack awareness of pitfalls arising from the intersection of social networking and medicine. Many institutions have developed guidelines on using SNS, but they are insufficient for students. Educators need new methods to train students on the appropriate use of this technology, but more information is needed before implementing change. Differences in SNS usage between students and faculty were examined. The goal was to evaluate four content areas: SNS usage patterns, attitudes regarding activity on SNS, experience with patient interactions online, and awareness of institutional guidelines on use of SNS. A cross-sectional survey took place at Feinberg School of Medicine, Northwestern University, in 2012. Participants included all students and a cohort of faculty who teach them in a class on professionalism. The response rate was 42% by students (300/711) and 78% by faculty (31/40). Of the students, 94% use SNS, compared to 48% of faculty. Students were more likely than faculty to display content they would not want patients to see (57% vs. 27%), report seeing inappropriate content on colleagues' SNS profiles (64% vs. 42%), and ignore harmful postings by colleagues (25% vs. 7%). Faculty were more likely than students to have been approached by patients on SNS (53% vs. 3%). Most participants were unlikely to conduct Internet searches on patients. Students are more likely than faculty to use SNS and use it very differently than faculty. Students would benefit from training on appropriate use of SNS. Topics that should be addressed include editing one's online presence, managing friend requests from patients, dealing with colleagues who post harmful content, conducting Internet searches on patients, and discussion of boundaries to identify potential harms associated with SNS usage. Differences in usage between students and faculty raise questions if faculty are well suited to provide this training.

Fuel Burn Estimation Using Real Track Data

NASA Technical Reports Server (NTRS)

Chatterji, Gano B.

2011-01-01

A procedure for estimating fuel burned based on actual flight track data, and drag and fuel-flow models is described. The procedure consists of estimating aircraft and wind states, lift, drag and thrust. Fuel-flow for jet aircraft is determined in terms of thrust, true airspeed and altitude as prescribed by the Base of Aircraft Data fuel-flow model. This paper provides a theoretical foundation for computing fuel-flow with most of the information derived from actual flight data. The procedure does not require an explicit model of thrust and calibrated airspeed/Mach profile which are typically needed for trajectory synthesis. To validate the fuel computation method, flight test data provided by the Federal Aviation Administration were processed. Results from this method show that fuel consumed can be estimated within 1% of the actual fuel consumed in the flight test. Next, fuel consumption was estimated with simplified lift and thrust models. Results show negligible difference with respect to the full model without simplifications. An iterative takeoff weight estimation procedure is described for estimating fuel consumption, when takeoff weight is unavailable, and for establishing fuel consumption uncertainty bounds. Finally, the suitability of using radar-based position information for fuel estimation is examined. It is shown that fuel usage could be estimated within 5.4% of the actual value using positions reported in the Airline Situation Display to Industry data with simplified models and iterative takeoff weight computation.

High-resolution depositional records of polycyclic aromatic hydrocarbons in the central continental shelf mud of the East China Sea.

PubMed

Guo, Zhigang; Lin, Tian; Zhang, Gan; Yang, Zuosheng; Fang, Ming

2006-09-01

A well-placed 210Pb-dated sediment core extracted from the distal mud in the central continental shelf of the East China Sea is used to reconstruct the high-resolution atmospheric depositional record of polycyclic aromatic hydrocarbons (PAHs), believed to be transported mainly from China in the past 200 years due to the East Asian Monsoon. Total PAHs (TPAHs), based on the 16 USEPA priority PAHs, range from 27 in 1788 to 132 ng g(-1) in 2001. TPAH variation in the core reflects energy usage changes and follows closely the historical economic development in China. PAHs in the core are dominantly pyrogenic in source, i.e., they are mainly from the incomplete combustion of coal and biomass burning. Several individual PAHs suggest that contribution from incomplete petroleum combustion has increased during recent years. Analysis of the 2 + 3 ring and the 5 + 6 ring PAHs and principle component analysis provide more evidence in the change in the energy structure, especially after 1978 when China embarked on the "Reform and Open" Policy, indicating the transformation from an agricultural to an industrial economy of China. The historical profile of PAH distribution in the study area is obviously different from the United States and Europe due to their difference in energy structure and economic development stages.

Competences of Engineers in the Iron and Steel Industry

NASA Astrophysics Data System (ADS)

Kozhevnikov, A. V.

2017-12-01

The article presents the results of assessment of the professional performance of engineers working in the iron and steel industry. A competence-based profile of highly-qualified professionals has been built. The study of the competences of the iron and steel industry engineers has shown that their knowledge and skills may be mobilized to solve professional tasks.

Study of the Economic and Rehabilitative Aspects of Prison Industry. Technical Tasks and Results.

ERIC Educational Resources Information Center

National Inst. of Law Enforcement and Criminal Justice (Dept. of Justice/LEAA), Washington, DC.

This volume analyzes existing and proposed correctional industries in Connecticut. First, the results of a survey made to determine the potential inmate work force for prison industry are presented as inmate profiles, descriptions of inmate and supervisor attitudes, and analyses of parolees' employment and recidivism rates. In part 2, four…

A Profile of Tax Subsidies and Investment Behavior in Six Major Polluting Industries (1997)

EPA Pesticide Factsheets

Reviews investment trends in pollution control technology to determine existing patterns and to highlight the likely investment incentives that six industries, metals mining, petroleum, primary metals, pulp and paper, chemicals, and electric utilities.

Applications of aerospace technology in industry. A technology transfer profile: Food technology

NASA Technical Reports Server (NTRS)

Murray, D. M.

1971-01-01

Food processing and preservation technologies are reviewed, expected technological advances are considered including processing and market factors. NASA contributions to food technology and nutrition are presented with examples of transfer from NASA to industry.

Using a source-receptor approach to characterise VOC behaviour in a French urban area influenced by industrial emissions. Part II: source contribution assessment using the Chemical Mass Balance (CMB) model.

PubMed

Badol, Caroline; Locoge, Nadine; Galloo, Jean-Claude

2008-01-25

In Part I of this study (Badol C, Locoge N, Leonardis T, Gallo JC. Using a source-receptor approach to characterise VOC behaviour in a French urban area influenced by industrial emissions, Part I: Study area description, data set acquisition and qualitative data analysis of the data set. Sci Total Environ 2007; submitted as companion manuscript.) the study area, acquisition of the one-year data set and qualitative analysis of the data set have been described. In Part II a source profile has been established for each activity present in the study area: 6 profiles (urban heating, solvent use, natural gas leakage, biogenic emissions, gasoline evaporation and vehicle exhaust) have been extracted from literature to characterise urban sources, 7 industrial profiles have been established via canister sampling around industrial plants (hydrocarbon cracking, oil refinery, hydrocarbon storage, lubricant storage, lubricant refinery, surface treatment and metallurgy). The CMB model is briefly described and its implementation is discussed through the selection of source profiles and fitting species. Main results of CMB modellings for the Dunkerque area are presented. (1) The daily evolution of source contributions for the urban wind sector shows that the vehicle exhaust source contribution varies between 40 and 55% and its relative increase at traffic rush hours is hardly perceptible. (2) The relative contribution of vehicle exhaust varies from 55% in winter down to 30% in summer. This decrease is due to the increase of the relative contribution of hydrocarbon storage source reaching up to 20% in summer. (3) The evolution of source contributions with wind directions has confirmed that in urban wind sectors the contribution of vehicle exhaust dominate with around 45-55%. For the other wind sectors that include some industrial plants, the contribution of industrial sources is around 60% and could reach 80% for the sector 280-310 degrees , which corresponds to the most dense industrial area. (4) The pollution in Dunkerque has been globally characterised taking into account the frequency of wind directions and contributions of sources in each wind direction for the whole year. It has been concluded that contribution of industrial sources is below 20% whereas vehicle exhaust contribution is superior to 40%.

Energy reduction for the spot welding process in the automotive industry

NASA Astrophysics Data System (ADS)

Cullen, J. D.; Athi, N.; Al-Jader, M. A.; Shaw, A.; Al-Shamma'a, A. I.

2007-07-01

When performing spot welding on galvanised metals, higher welding force and current are required than on uncoated steels. This has implications for the energy usage when creating each spot weld, of which there are approximately 4300 in each passenger car. The paper presented is an overview of electrode current selection and its variance over the lifetime of the electrode tip. This also describes the proposed analysis system for the selection of welding parameters for the spot welding process, as the electrode tip wears.

Analysis of the Potential Impact of Additive Manufacturing on Army Logistics

DTIC Science & Technology

2013-12-01

baseline characteristics for building a process timeline for comparison. We then examined current industry usage of AM to determine the impact on...the material onto a foam base on a build platform. The FDM extrusion head moves along the X and Y axis. As build and support material is fed...layer of powdered metal or thermoplastic is exposed to a laser or electron beam that fuses the material into a solid in designated areas; then a new

Power, Performance, and Perception (P3): Integrating Usability Metrics and Technology Acceptance Determinants to Validate a New Model for Predicting System Usage

DTIC Science & Technology

1999-12-01

Ajzen , I . and M . Fishbein . Understanding Attitudes and Predicting Social Behavior. ’ Prentice-Hall, Englewood Cliffs, NJ: 1980. Alwang, Greg. "Speech...Decline: Computer Introduction in the Financial Industry." Technology Forecasting and Social Change. 31: 143-154. Fishbein , M . and I . Ajzen . Belief...Theory of Reasoned Action (TRA) ( Fishbein and Ajzen , 1980) 13 3. Theory of Planned Behavior (TPB) ( Ajzen , 1991) 15 4. Technology Acceptance Model

Porting of EPICS to Real Time UNIX, and Usage Ported EPICS for FEL Automation

NASA Astrophysics Data System (ADS)

Salikova, Tatiana

This article describes concepts and mechanisms used in porting of EPICS (Experimental Physical and Industrial Control System) codes to platform of operating system UNIX. Without destruction of EPICS architecture, new features of EPICS provides the support for real time operating system LynxOS/x86 and equipment produced by INP (Budker Institute of Nuclear Physics). Application of ported EPICS reduces the cost of software and hardware is used for automation of FEL (Free Electron Laser) complex.

A regional technology transfer program

NASA Technical Reports Server (NTRS)

1978-01-01

The final report is presented for the North Carolina Science and Technology Research Center's 14th consecutive contract period as a NASA Industrial Applications Center, serving the information needs of nine Southeastern states. Included in the report are figures for and analysis of marketing efforts, file usage, search delivered, and other services performed for clients; and information on staff changes, workshops, and special projects in 1978. An appendix contains copies of NC/STRC magazine advertisements, letters from clients, and supplementary information on NC/STRC staff and services.

Patent Reform in the 110th Congress: Innovation Issues

DTIC Science & Technology

2007-05-07

Essay,” 93 Michigan Law Review (1995), 1570. 25 David D. Friedman et al., “Some Economics of Trade Secret Law,” 5 Journal of Economic Perspectives...Industry?,” 83 Texas Law Review (2005), 961. 49 See David G. Barker, “Troll or No Troll? Policing Patent Usage with An Open Post-Grant Review,” 2005 Duke...User Rights — A Necessary Part of a First-to-File System,” 26 John Marshall Law Review (1993), 567. 63 See David H. Hollander, Jr., “The First

The Acoustic Model Evaluation Committee (AMEC) Reports. Volume 3. Evaluation of the RAYMODE X Propagation Loss Model. Book 1

DTIC Science & Technology

1982-09-01

and run on single sound speed profile. This model the UNIVAC 1108 computer. Other RAYMODE is in exteasive fleet usage, supporting versions were not...sought for significant disparities. (U) In addition to a sound speed versus depth or temperature versus depth plus a (U) Taken together, the two accuracy...as- constant salinity value, the program can sessment techniques, the Difference and access historical sound speed data FOM techniques, lead to

Transitioning ISR architecture into the cloud

NASA Astrophysics Data System (ADS)

Lash, Thomas D.

2012-06-01

Emerging cloud computing platforms offer an ideal opportunity for Intelligence, Surveillance, and Reconnaissance (ISR) intelligence analysis. Cloud computing platforms help overcome challenges and limitations of traditional ISR architectures. Modern ISR architectures can benefit from examining commercial cloud applications, especially as they relate to user experience, usage profiling, and transformational business models. This paper outlines legacy ISR architectures and their limitations, presents an overview of cloud technologies and their applications to the ISR intelligence mission, and presents an idealized ISR architecture implemented with cloud computing.

[Heavy Metals Accmultio in the Caofeidian Reclamation Soils: Indicated by Soil Magnetic Susceptibility].

PubMed

Xue, Yong; Zhou, Qian; Li, Yuan; Zhang, Hai-bo; Hu, Xue-feng; Luo, Yong-ming

2016-04-15

The environmental magnetism method has been widely applied to identify soil heavy metal pollution, which is characterized by simplicity, efficiency, non-destructivity and sensitivity. The present study used magnetic susceptibility to assess the accumulation of heavy metals in soils of the Caofeidian industrial zone which is a typical reclamation area in northern China. The study area was divided into three sub-zones based on the function, including industrial zone, living zone, natural tidal flat and wetland. A total of 35 topsoil samples (0-10 cm) and 3 soil profiles were collected from the three sub-zones. Magnetic susceptibility (X(lf)), iron oxide (Fe2O3) contents and heavy metals contents (Cr, Ni, Cu, Zn, As, Pb, Mn and V) of the samples were analyzed. The results showed that X(lf) values and heavy metals contents exhibited higher spatial variability in the top soil of the industrial zone, indicating the severe impacts of industrial activities. In the soil profiles of the industrial and living zones, all heavy metals were enriched to different degrees in the upper layer (0-20 cm). However, there was no significant change of heavy metal contents in the soil profiles of tidal flat which was far from the industrial area. The X(lf) value was significantly (P < 0.01) positively correlated with the contents of Fe2O3, Ni, Cu, As and V in the industrial top soil. This indicated that X(lf) could be used as an indicator for heavy metal accumulation in the industrial zone. However, the X(lf) value was not suitable to be an indicator to show the heavy metal accumulation in the soils of living zone and natural tidal flat. This might be associated with the different sources of magnetic materials among the different sub-zones and the special characteristics of the soils in the tidal flat and wetland.

Proposal of optical farming: development of several optical sensing instruments for agricultural use

NASA Astrophysics Data System (ADS)

Saito, Y.; Kobayashi, K.

2013-05-01

We propose the use of "Optical Farming," which is the leading application of all types of optical technologies, in agriculture and agriculture-related industries. This paper focuses on the optical sensing instruments named "Agriserver," "Agrigadget" and "LIFS Monitor" developed in our laboratory. They are considered major factors in utilizing Optical Farming. Agriserver is a sensor network system that uses the Internet to collect information on agricultural products growing in fields. Agrigadget contains several optical devices, such as a smartphone-based spectroscopic device and a hand framing camera. LIFS Monitor is an advanced monitoring instrument that makes it possible to obtain physiological information of living plants. They are strongly associated with information communication technology. Their field and data usage performance in agricultural industries are reported.

Genomic Evolution of the Ascomycete Yeasts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riley, Robert; Haridas, Sajeet; Salamov, Asaf

2015-03-16

Yeasts are important for industrial and biotechnological processes and show remarkable metabolic and phylogenetic diversity despite morphological similarities. We have sequenced the genomes of 16 ascomycete yeasts of taxonomic and industrial importance including members of Saccharomycotina and Taphrinomycotina. Phylogenetic analysis of these and previously published yeast genomes helped resolve the placement of species including Saitoella complicata, Babjeviella inositovora, Hyphopichia burtonii, and Metschnikowia bicuspidata. Moreover, we find that alternative nuclear codon usage, where CUG encodes serine instead of leucine, are monophyletic within the Saccharomycotina. Most of the yeasts have compact genomes with a large fraction of single exon genes, and amore » tendency towards more introns in early-diverging species. Analysis of enzyme phylogeny gives insights into the evolution of metabolic capabilities such as methanol utilization and assimilation of alternative carbon sources.« less

Perfect metamaterial absorber-based energy harvesting and sensor applications in the industrial, scientific, and medical band

NASA Astrophysics Data System (ADS)

Bakir, Mehmet; Karaaslan, Muharrem; Dincer, Furkan; Delihacioglu, Kemal; Sabah, Cumali

2015-09-01

An electromagnetic (EM) energy harvesting application based on metamaterials is introduced. This application is operating at the the industrial, scientific, and medical band (2.40 GHz), which is especially chosen because of its wide usage area. A square ring resonator (SRR) which has two gaps and two resistors across the gaps on it is used. Chip resistors are used to deliver the power to any active component that requires power. Transmission and reflection characteristics of the metamaterial absorber for energy harvesting application are theoretically investigated and 83.6% efficient energy harvesting application is realized. To prove that this study can be used for different sensor applications other than harvesting, a temperature sensor configuration is developed that can be applied to other sensing applications.

High profile rail clearances in the State of Pennsylvania : reports 1 through 5

DOT National Transportation Integrated Search

1992-10-01

During the past decade, the decade since deregulation, the rail industry has significantly increased its productivity. This increase in productivity has increased the value" of the transportation services which the industry offers to its customers. P...

Vocational Training in Norway.

ERIC Educational Resources Information Center

Mortensen, Gunnar; Persson, Sven

The purpose of this publication is to present Norway's industrial status, industrial manpower profile, and philosophy of vocational training. The relation between general and vocational education is discussed and Norway's educational system is outlined. Occupational areas receiving detailed discussion include (1) Agriculture, (2) Maritime…

Systematic approach in petroleum personnel competence assessment

NASA Astrophysics Data System (ADS)

Romanyuk, Vera; Nekhoda, Evgeniya; Dmitriev, Andrey; Khudyakov, Dmitriy; Pozdeeva, Galina

2016-09-01

The article is devoted to professional competence improvement of personnel in the petroleum industry. The technique for competence assessment optimization in oil and gas well drilling is developed. The specification for the oil and gas industry competence profiles has been provided.

Warehousing Competency Profile. Apprenticeship Training.

ERIC Educational Resources Information Center

Alberta Learning, Edmonton. Apprenticeship and Industry Training.

This document presents information about the apprenticeship training program of Alberta, Canada, in general and the warehousing program in particular. The first part of the document discusses the following items: Alberta's apprenticeship and industry training system; the apprenticeship and industry training committee structure; local…

Entrepreneurship. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for entrepreneurship. The list contains units (with and without subunits), competencies, and competency builders that…

Performance Profiles of Major Energy Producers

EIA Publications

2011-01-01

The information and analyses in Performance Profiles of Major Energy Producers is intended to provide a critical review, and promote an understanding, of the possible motivations and apparent consequences of investment decisions made by some of the largest corporations in the energy industry.

Electronics. Occupational Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

Masonry. Occupational Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Occupational Competency Analysis Profile (OCAP) for masonry occupations contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability…

Horticulture. Occupational Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

Carpentry. Occupational Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

Efficient three-dimensional resist profile-driven source mask optimization optical proximity correction based on Abbe-principal component analysis and Sylvester equation

NASA Astrophysics Data System (ADS)

Lin, Pei-Chun; Yu, Chun-Chang; Chen, Charlie Chung-Ping

2015-01-01

As one of the critical stages of a very large scale integration fabrication process, postexposure bake (PEB) plays a crucial role in determining the final three-dimensional (3-D) profiles and lessening the standing wave effects. However, the full 3-D chemically amplified resist simulation is not widely adopted during the postlayout optimization due to the long run-time and huge memory usage. An efficient simulation method is proposed to simulate the PEB while considering standing wave effects and resolution enhancement techniques, such as source mask optimization and subresolution assist features based on the Sylvester equation and Abbe-principal component analysis method. Simulation results show that our algorithm is 20× faster than the conventional Gaussian convolution method.

Predictive Lateral Logic for Numerical Entry Guidance Algorithms

NASA Technical Reports Server (NTRS)

Smith, Kelly M.

2016-01-01

Recent entry guidance algorithm development123 has tended to focus on numerical integration of trajectories onboard in order to evaluate candidate bank profiles. Such methods enjoy benefits such as flexibility to varying mission profiles and improved robustness to large dispersions. A common element across many of these modern entry guidance algorithms is a reliance upon the concept of Apollo heritage lateral error (or azimuth error) deadbands in which the number of bank reversals to be performed is non-deterministic. This paper presents a closed-loop bank reversal method that operates with a fixed number of bank reversals defined prior to flight. However, this number of bank reversals can be modified at any point, including in flight, based on contingencies such as fuel leaks where propellant usage must be minimized.

The 2002 to 2010 mask survey trend analysis

NASA Astrophysics Data System (ADS)

Hughes, Greg; Chan, David

2011-03-01

Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply as top critical issues. A survey was designed with input from semiconductor company mask technologists and merchant mask suppliers and support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's assessment was the ninth in the current series of annual reports. Its data were presented in detail at BACUS, and the detailed trend analysis is presented at EMLC. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. Results will be used to guide future investments in critical path issues. This year's survey is basically the same as the 2005 through 2010 surveys. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that ultimately create a detailed profile of both the business and technical status of the critical mask industry.

Emission characteristics and chemical components of size-segregated particulate matter in iron and steel industry

NASA Astrophysics Data System (ADS)

Jia, Jia; Cheng, Shuiyuan; Yao, Sen; Xu, Tiebing; Zhang, Tingting; Ma, Yuetao; Wang, Hongliang; Duan, Wenjiao

2018-06-01

As one of the highest energy consumption and pollution industries, the iron and steel industry is regarded as a most important source of particulate matter emission. In this study, chemical components of size-segregated particulate matters (PM) emitted from different manufacturing units in iron and steel industry were sampled by a comprehensive sampling system. Results showed that the average particle mass concentration was highest in sintering process, followed by puddling, steelmaking and then rolling processes. PM samples were divided into eight size fractions for testing the chemical components, SO42- and NH4+ distributed more into fine particles while most of the Ca2+ was concentrated in coarse particles, the size distribution of mineral elements depended on the raw materials applied. Moreover, local database with PM chemical source profiles of iron and steel industry were built and applied in CMAQ modeling for simulating SO42- and NO3- concentration, results showed that the accuracy of model simulation improved with local chemical source profiles compared to the SPECIATE database. The results gained from this study are expected to be helpful to understand the components of PM in iron and steel industry and contribute to the source apportionment researches.

A Simultaneous Density-Integral System for Estimating Stem Profile and Biomass: Slash Pine and Willow Oak

Treesearch

Bernard R. Parresol; Charles E. Thomas

1996-01-01

In the wood utilization industry, both stem profile and biomass are important quantities. The two have traditionally been estimated separately. The introduction of a density-integral method allows for coincident estimation of stem profile and biomass, based on the calculus of mass theory, and provides an alternative to weight-ratio methodology. In the initial...

100 Most Popular Business Leaders for Young Adults: Biographical Sketches and Professional Paths. Profiles and Pathways Series.

ERIC Educational Resources Information Center

Logan, Rochelle; Halverstadt, Julie

This book, which is intended as a reference for teenagers and educators, profiles the lives and professional paths of the 100 most popular business leaders for young adults. Those profiled were selected for a number of reasons, including the following: their names are recognizable; they are associated with businesses and industries that are…

Velocity Profile measurements in two-phase flow using multi-wave sensors

NASA Astrophysics Data System (ADS)

Biddinika, M. K.; Ito, D.; Takahashi, H.; Kikura, H.; Aritomi, M.

2009-02-01

Two-phase flow has been recognized as one of the most important phenomena in fluid dynamics. In addition, gas-liquid two-phase flow appears in various industrial fields such as chemical industries and power generations. In order to clarify the flow structure, some flow parameters have been measured by using many effective measurement techniques. The velocity profile as one of the important flow parameter, has been measured by using ultrasonic velocity profile (UVP) technique. This technique can measure velocity distributions along a measuring line, which is a beam formed by pulse ultrasounds. Furthermore, a multi-wave sensor can measure the velocity profiles of both gas and liquid phase using UVP method. In this study, two types of multi-wave sensors are used. A sensor has cylindrical shape, and another one has square shape. The piezoelectric elements of each sensor have basic frequencies of 8 MHz for liquid phase and 2 MHz for gas phase, separately. The velocity profiles of air-water bubbly flow in a vertical rectangular channel were measured by using these multi-wave sensors, and the validation of the measuring accuracy was performed by the comparison between the velocity profiles measured by two multi-wave sensors.

Mask industry assessment trend analysis

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2009-01-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's survey data were presented in detail at BACUS and the detailed trend analysis presented at EMLC. The survey is designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the seventh in the current series of annual reports. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments on critical path issues. This year's survey is basically the same as the surveys in 2005 through 2007. Questions are grouped into seven categories: General Business Profile Information, Data Processing, Yields and Yield Loss, Mechanisms, Delivery Times, Returns, and Services. (Examples are given below). Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry.

Mask industry assessment trend analysis: 2012

NASA Astrophysics Data System (ADS)

Chan, Y. David

2012-02-01

Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply among the top critical issues for lithography. A survey was designed by SEMATECH with input from semiconductor company mask technologists and merchant mask suppliers to objectively assess the overall conditions of the mask industry. With the continued support of the industry, this year's assessment was the tenth in the current series of annual reports. This year's survey is basically the same as the 2005 through 2011 surveys. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that ultimately produce a detailed profile of both the business and technical status of the critical mask industry. We received data from 11 companies this year, which was a record high since the beginning of the series. The responding companies represented more than 96% of the volume shipped and about 90% of the 2011 revenue for the photomask industry. These survey reports are often used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. They will continue to serve as a valuable reference to identify strengths and opportunities. Results can also be used to guide future investments in critical path issues.

Solid state recycling of aluminium alloys via a porthole die hot extrusion process: Scaling up to production

NASA Astrophysics Data System (ADS)

Paraskevas, Dimos; Kellens, Karel; Deng, Yelin; Dewulf, Wim; Kampen, Carlos; Duflou, Joost R.

2017-10-01

Whereas industrial symbiosis has led to increased energy and resource efficiency in process industries, this concept has not yet been applied in discrete product manufacturing. Metal scrap is first conventionally recycled, for which substantial energy and resource efficiency losses have been reported. Recent research has however proven the feasibility of `meltless' recycling of light metal scrap, yielding a first glimpse of potential industrial symbiosis. Various solid state recycling techniques (such as recycling via hot extrusion or Spark Plasma Sintering) have been proposed for scrap consolidation directly into bulk products or semis by physical disruption and dispersion of the oxide surface film by imposing significant plastic and shear strain. Solid State Recycling (SSR) methods can omit substantial material losses as they bypass the metallurgical recycling step. In this context the case of direct production of bulk aluminium profiles via hot extrusion at industrial scale is demonstrated within this paper. The extrusion tests were performed directly into the production line, highlighting the scaling up potentials and the industrial relevance of this research. A significant amount of machining chips were collected, chemically cleaned and cold compacted into chip based billets with ˜80% relative density. Afterwards the scrap consolidation was achieved by imposing significant plastic and shear deformation into the material during hot extrusion through a modified 2-porthole extrusion die-set. The production process sequence along with microstructural investigations and mechanical properties comparison of the cast based profile used as reference versus the chip based profile are presented.

Portable low-coherence interferometry for quantitatively imaging fast dynamics with extended field of view

NASA Astrophysics Data System (ADS)

Shaked, Natan T.; Girshovitz, Pinhas; Frenklach, Irena

2014-06-01

We present our recent advances in the development of compact, highly portable and inexpensive wide-field interferometric modules. By a smart design of the interferometric system, including the usage of low-coherence illumination sources and common-path off-axis geometry of the interferometers, spatial and temporal noise levels of the resulting quantitative thickness profile can be sub-nanometric, while processing the phase profile in real time. In addition, due to novel experimentally-implemented multiplexing methods, we can capture low-coherence off-axis interferograms with significantly extended field of view and in faster acquisition rates. Using these techniques, we quantitatively imaged rapid dynamics of live biological cells including sperm cells and unicellular microorganisms. Then, we demonstrated dynamic profiling during lithography processes of microscopic elements, with thicknesses that may vary from several nanometers to hundreds of microns. Finally, we present new algorithms for fast reconstruction (including digital phase unwrapping) of off-axis interferograms, which allow real-time processing in more than video rate on regular single-core computers.

Highlights: US Commercial Remote Sensing Industry Analysis

NASA Technical Reports Server (NTRS)

Rabin, Ron

2002-01-01

This viewgraph presentation profiles the US remote sensing industry based on responses to a survey by 1450 industry professionals. The presentation divides the industry into three sectors: academic, commercial, and government; the survey results from each are covered in a section of the presentation. The presentation also divides survey results on user needs into the following sectors: spatial resolution, geolocation accuracy; elevation accuracy, area coverage, imagery types, and timeliness. Data, information, and software characteristics are also covered in the presentation.

Principal component analysis of TOF-SIMS spectra, images and depth profiles: an industrial perspective

NASA Astrophysics Data System (ADS)

Pacholski, Michaeleen L.

2004-06-01

Principal component analysis (PCA) has been successfully applied to time-of-flight secondary ion mass spectrometry (TOF-SIMS) spectra, images and depth profiles. Although SIMS spectral data sets can be small (in comparison to datasets typically discussed in literature from other analytical techniques such as gas or liquid chromatography), each spectrum has thousands of ions resulting in what can be a difficult comparison of samples. Analysis of industrially-derived samples means the identity of most surface species are unknown a priori and samples must be analyzed rapidly to satisfy customer demands. PCA enables rapid assessment of spectral differences (or lack there of) between samples and identification of chemically different areas on sample surfaces for images. Depth profile analysis helps define interfaces and identify low-level components in the system.

Latent Profiles of Perceived Time Adequacy for Paid Work, Parenting, and Partner Roles

PubMed Central

Lee, Soomi; Almeida, David M.; Davis, Kelly D.; King, Rosalind B.; Hammer, Leslie B.; Kelly, Erin L.

2015-01-01

This study examined feelings of having enough time (i.e., perceived time adequacy) in a sample of employed parents (N=880) in information technology and extended-care industries. Adapting a person-centered latent profile approach, we identified three profiles of perceived time adequacy for paid work, parenting, and partner roles: Family Time Protected, Family Time Sacrificed, and Time Balanced. Drawing upon the Conservation of Resources theory (Hobfòll, 1989), we examined the associations of stressors and resources with the time adequacy profiles. Parents in the Family Time Sacrificed profile were more likely to be younger, women, have younger children, work in the extended-care industry, and have nonstandard work schedules compared to those in the Family Time Protected profile. Results from multinomial logistic regression analyses revealed that, with the Time Balanced profile as the reference group, having fewer stressors and more resources in the family context (less parent-child conflict and more partner support), work context (longer company tenure, higher schedule control and job satisfaction), and work-family interface (lower work-to-family conflict) was linked to a higher probability of membership in the Family Time Protected profile. By contrast, having more stressors and fewer resources, in the forms of less partner support and higher work-to-family conflict, predicted a higher likelihood of being in the Family Time Sacrificed profile. Our findings suggest that low work-to-family conflict is the most critical predictor of membership in the Family Time Protected profile, whereas lack of partner support is the most important factor to be included in the Family Time Sacrificed profile. PMID:26075739

Allocative Efficiency Analysys Production Function Of Cassava Farming (Manihot, Sp.) In Tenayan Raya Sub-District Of Pekanbaru City

NASA Astrophysics Data System (ADS)

Nizar, Rini; Nurwati, Niken; Amalia

2017-12-01

Cassava (Manihot sp) has long been known and cultivated by Indonesian farmers. The economic and social potential of cassava aside from foodstuffs can also be used as raw materials for industrial use and animal feed. In Riau Province, Cassva has the potential to be developed considering Cassva is a plant that can easily grow on low altitude to high altitude lands. Cassava does not need a complex maintenance. Conventionally, this plant can be planted and left alone by itself. Cassava roots can be developed to be a processed products that society needs as main foodstuffs ingredients. This research is done in three months and the purpose is to know the influence of input use (pesticide, seeds, fertilizers and labor) on cassava farming to cassava farming by the model of cobb-douglas. Other than that is also the effect on economical efficiency. The method used in this research is a quantitative research by using Cobb-Douglas Function Model. This research was done in the Tenayan Raya sub-district with 55 farmer samples. This research shows Cobb-Douglas Production Function can be used as the predictor for Cassava production function in Tenayan Raya Sub-district of Pekanbaru City. Altogether the production factor used by farmers influence production. Partially only usage of organic fertilizer that does not affect production, while other production factor such as, seeds, pesticides, an-organic fertilizer (urea) and labor affect production by quite a bit. Usage of production factor seeds, urea and pesticides is not yet efficient while usage of organic fertilizer is not efficient and usage of labor on cassava agriculture by respondent farmers is relatively efficient

Saving Water at Los Alamos National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erickson, Andy

Los Alamos National Laboratory decreased its water usage by 26 percent in 2014, with about one-third of the reduction attributable to using reclaimed water to cool a supercomputing center. The Laboratory's goal during 2014 was to use only re-purposed water to support the mission at the Strategic Computing Complex. Using reclaimed water from the Sanitary Effluent Reclamation Facility, or SERF, substantially decreased water usage and supported the overall mission. SERF collects industrial wastewater and treats it for reuse. The reclamation facility contributed more than 27 million gallons of re-purposed water to the Laboratory's computing center, a secured supercomputing facility thatmore » supports the Laboratory’s national security mission and is one of the institution’s larger water users. In addition to the strategic water reuse program at SERF, the Laboratory reduced water use in 2014 by focusing conservation efforts on areas that use the most water, upgrading to water-conserving fixtures, and repairing leaks identified in a biennial survey.« less

The Future of Low-Carbon Transportation Fuels

NASA Astrophysics Data System (ADS)

Yang, Christopher; Yeh, Sonia

2011-11-01

Petroleum fuel uses make up essentially all of transportation fuel usage today and will continue to dominate transportation fuel usage well into future without any major policy changes. This chapter focuses on low-carbon transportation fuels, specifically, biofuels, electricity and hydrogen, that are emerging options to displace petroleum based fuels. The transition to cleaner, lower carbon fuel sources will need significant technology advancement, and sustained coordination efforts among the vehicle and fuel industry and policymakers/regulators over long period of time in order to overcome market barriers, consumer acceptance, and externalities of imported oil. We discuss the unique infrastructure challenges, and compare resource, technology, economics and transitional issues for each of these fuels. While each fuel type has important technical and implementation challenges to overcome (including vehicle technologies) in order to contribute a large fraction of our total fuel demand, it is important to note that a portfolio approach will give us the best chance of meeting stringent environmental and energy security goals for a sustainable transportation future.