Sustainable Cost Models for mHealth at Scale: Modeling Program Data from m4RH Tanzania

PubMed Central

Mangone, Emily R.; Agarwal, Smisha; L’Engle, Kelly; Lasway, Christine; Zan, Trinity; van Beijma, Hajo; Orkis, Jennifer; Karam, Robert

2016-01-01

Background There is increasing evidence that mobile phone health interventions (“mHealth”) can improve health behaviors and outcomes and are critically important in low-resource, low-access settings. However, the majority of mHealth programs in developing countries fail to reach scale. One reason may be the challenge of developing financially sustainable programs. The goal of this paper is to explore strategies for mHealth program sustainability and develop cost-recovery models for program implementers using 2014 operational program data from Mobile for Reproductive Health (m4RH), a national text-message (SMS) based health communication service in Tanzania. Methods We delineated 2014 m4RH program costs and considered three strategies for cost-recovery for the m4RH program: user pay-for-service, SMS cost reduction, and strategic partnerships. These inputs were used to develop four different cost-recovery scenarios. The four scenarios leveraged strategic partnerships to reduce per-SMS program costs and create per-SMS program revenue and varied the structure for user financial contribution. Finally, we conducted break-even and uncertainty analyses to evaluate the costs and revenues of these models at the 2014 user volume (125,320) and at any possible break-even volume. Results In three of four scenarios, costs exceeded revenue by $94,596, $34,443, and $84,571 at the 2014 user volume. However, these costs represented large reductions (54%, 83%, and 58%, respectively) from the 2014 program cost of $203,475. Scenario four, in which the lowest per-SMS rate ($0.01 per SMS) was negotiated and users paid for all m4RH SMS sent or received, achieved a $5,660 profit at the 2014 user volume. A Monte Carlo uncertainty analysis demonstrated that break-even points were driven by user volume rather than variations in program costs. Conclusions These results reveal that breaking even was only probable when all SMS costs were transferred to users and the lowest per-SMS cost was negotiated with telecom partners. While this strategy was sustainable for the implementer, a central concern is that health information may not reach those who are too poor to pay, limiting the program’s reach and impact. Incorporating strategies presented here may make mHealth programs more appealing to funders and investors but need further consideration to balance sustainability, scale, and impact. PMID:26824747

HWNOISE program users' guide

DOT National Transportation Integrated Search

1992-02-01

HWNOISE is a VNTSC-developed user friendly program written in : Microsoft Fortran version 4.01 for the IBM PC/AT and : compatibles to analyze acoustic data. This program is an : integral part of the Federal Highway Administration's Mobile : Noise Dat...

HWINPUT program users' guide

DOT National Transportation Integrated Search

1992-02-01

HWINPUT is a VNTSC-developed user friendly program written in : Microsoft Fortran version 4.01 for the IBM PC/AT. This program : is an integral part of the Federal Highway Administration's : Mobile Noise Data Gathering and Analysis Laboratory and is ...

How do drug users define their progress in harm reduction programs? Qualitative research to develop user-generated outcomes

PubMed Central

Ruefli, Terry; Rogers, Susan J

2004-01-01

Background Harm reduction is a relatively new and controversial model for treating drug users, with little formal research on its operation and effectiveness. In order to advance the study of harm reduction programs and our understanding of how drug users define their progress, qualitative research was conducted to develop outcomes of harm reduction programming that are culturally relevant, incremental, (i.e., capable of measuring change), and hierarchical (i.e., capable of showing how clients improve over time). Methods The study used nominal group technique (NGT) to develop the outcomes (phase 1) and focus group interviews to help validate the findings (phase 2). Study participants were recruited from a large harm-reduction program in New York City and involved approximately 120 clients in 10 groups in phase 1 and 120 clients in 10 focus groups in phase 2. Results Outcomes of 10 life areas important to drug users were developed that included between 10 to 15 incremental measures per outcome. The outcomes included ways of 1) making money; 2) getting something good to eat; 3) being housed/homeless; 4) relating to families; 5) getting needed programs/benefits/services; 6) handling health problems; 7) handling negative emotions; 8) handling legal problems; 9) improving oneself; and 10) handling drug-use problems. Findings also provided insights into drug users' lives and values, as well as a window into understanding how this population envisions a better quality of life. Results challenged traditional ways of measuring drug users based solely on quantity used and frequency of use. They suggest that more appropriate measures are based on the extent to which drug users organize their lives around drug use and how much drug use is integrated into their lives and negatively impacts other aspects of their lives. Conclusions Harm reduction and other programs serving active drug users and other marginalized people should not rely on institutionalized, provider-defined solutions to problems in living faced by their clients. PMID:15333130

Conceptual Modeling via Logic Programming

DTIC Science & Technology

1990-01-01

Define User Interface and Query Language L i1W= Ltl k.l 4. Define Procedures for Specifying Output S . Select Logic Programming Language 6. Develop ...baseline s change model. sessions and baselines. It was changed 6. Develop Methodology for C 31 Users. considerably with the advent of the window This...Model Development : Implica- for Conceptual Modeling Via Logic tions for Communications of a Cognitive Programming. Marina del Rey, Calif.: Analysis of

EPRI Guide to Managing Nuclear Utility Protective Clothing Programs. PCEVAL User`s Manual, A computer code for evaluating the economics of nuclear plant protective clothing programs: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, J.J.; Kelly, D.M.

1993-10-01

The Electric Power Research Institute (EPRI) commissioned a radioactive waste related project (RP2414-34) in 1989 to produce a guide for developing and managing nuclear plant protective clothing programs. Every nuclear facility must coordinate some type of protective clothing program for its radiation workers to ensure proper and safe protection for the wearer and to maintain control over the spread of contamination. Yet, every nuclear facility has developed its own unique program for managing such clothing. Accordingly, a need existed for a reference guide to assist with standardizing protective clothing programs and in controlling the potentially escalating economics of such programs.more » The initial Guide to Managing Nuclear Utility Protective Clothing Programs, NP-7309, was published in May 1991. Since that time, a number of utilities have reviewed and/or used the report to enhance their protective clothing programs. Some of these utilities requested that a computer program be developed to assist utilities in evaluating the economics of protective clothing programs consistent with the guidance in NP-7309. The PCEVAL computer code responds to that industry need. This report, the PCEVAL User`s Manual, provides detailed instruction on use of the software.« less

Asymmetrical booster ascent guidance and control system design study. Volume 4: Sampled data stability analysis program (SADSAP) user's guide. [space shuttle development

NASA Technical Reports Server (NTRS)

Wilson, J. L.

1974-01-01

A users guide to the Sampled Data Stability Analysis Program (SADSAP) is provided. This program is a general purpose sampled data Stability Analysis Program capable of providing frequency response on root locus data.

User interface support

NASA Technical Reports Server (NTRS)

Lewis, Clayton; Wilde, Nick

1989-01-01

Space construction will require heavy investment in the development of a wide variety of user interfaces for the computer-based tools that will be involved at every stage of construction operations. Using today's technology, user interface development is very expensive for two reasons: (1) specialized and scarce programming skills are required to implement the necessary graphical representations and complex control regimes for high-quality interfaces; (2) iteration on prototypes is required to meet user and task requirements, since these are difficult to anticipate with current (and foreseeable) design knowledge. We are attacking this problem by building a user interface development tool based on extensions to the spreadsheet model of computation. The tool provides high-level support for graphical user interfaces and permits dynamic modification of interfaces, without requiring conventional programming concepts and skills.

Tai Chi: moving for better balance -- development of a community-based falls prevention program.

PubMed

Li, Fuzhong; Harmer, Peter; Mack, Karin A; Sleet, David; Fisher, K John; Kohn, Melvin A; Millet, Lisa M; Xu, Junheng; Yang, Tingzhong; Sutton, Beth; Tompkins, Yvaughn

2008-05-01

This study was designed to develop an evidence- and community based falls prevention program -- Tai Chi: Moving for Better Balance. A mixed qualitative and quantitative approach was used to develop a package of materials for program implementation and evaluation. The developmental work was conducted in 2 communities in the Pacific Northwest. Participants included a panel of experts, senior service program managers or activity coordinators, and older adults. Outcome measures involved program feasibility and satisfaction. Through an iterative process, a program package was developed. The package contained an implementation plan and class training materials (ie, instructor's manual, videotape, and user's guidebook). Pilot testing of program materials showed that the content was appropriate for the targeted users (community-living older adults) and providers (local senior service organizations). A feasibility survey indicated interest and support from users and providers for program implementation. A 2-week pilot evaluation showed that the program implementation was feasible and evidenced good class attendance, high participant satisfaction, and interest in continuing Tai Chi. The package of materials developed in this study provides a solid foundation for larger scale implementation and evaluation of the program in community settings.

Knowledge Workshop Development

DTIC Science & Technology

1976-01-30

priorities. The mechanism also seems to act as a buffer between developer and user, softening the negative aspects of user frustration while still...structure ’ programming methods. 4) Documentation: Effective documentation methods must be developed and used since undocumented programs are virtually...1-W.,U1..W1 . II I u KNOWLEDGE WORKSHOP DEVELOPMENT Douglas C. Engelbart Stanford Research Institute AD-A022 997 Prepared for: Rome

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation. Appendix A: ROBSIM user's guide

NASA Technical Reports Server (NTRS)

Haley, D. C.; Almand, B. J.; Thomas, M. M.; Krauze, L. D.; Gremban, K. D.; Sanborn, J. C.; Kelley, J. H.; Depkovich, T. M.; Wolfe, W. J.; Nguyen, T.

1986-01-01

The purpose of the Robotics Simulation Program is to provide a broad range of computer capabilities to assist in the design, verification, simulation, and study of robotics systems. ROBSIM is program in FORTRAN 77 for use on a VAX 11/750 computer under the VMS operating system. This user's guide describes the capabilities of the ROBSIM programs, including the system definition function, the analysis tools function and the postprocessor function. The options a user may encounter with each of these executables are explained in detail and the different program prompts appearing to the user are included. Some useful suggestions concerning the appropriate answers to be given by the user are provided. An example user interactive run in enclosed for each of the main program services, and some of the capabilities are illustrated.

DORMAN computer program (study 2.5). Volume 2: User's guide and programmer's guide. [development of data bank for computerized information storage of NASA programs

NASA Technical Reports Server (NTRS)

Wray, S. T., Jr.

1973-01-01

The DORMAN program was developed to create and modify a data bank containing data decks which serve as input to the DORCA Computer Program. Via a remote terminal a user can access the bank, extract any data deck, modify that deck, output the modified deck to be input to the DORCA program, and save the modified deck in the data bank. This computer program is an assist in the utilization of the DORCA program. The program is dimensionless and operates almost entirely in integer mode. The program was developed on the CDC 6400/7600 complex for implementation on a UNIVAC 1108 computer.

The Euler’s Graphical User Interface Spreadsheet Calculator for Solving Ordinary Differential Equations by Visual Basic for Application Programming

NASA Astrophysics Data System (ADS)

Gaik Tay, Kim; Cheong, Tau Han; Foong Lee, Ming; Kek, Sie Long; Abdul-Kahar, Rosmila

2017-08-01

In the previous work on Euler’s spreadsheet calculator for solving an ordinary differential equation, the Visual Basic for Application (VBA) programming was used, however, a graphical user interface was not developed to capture users input. This weakness may make users confuse on the input and output since those input and output are displayed in the same worksheet. Besides, the existing Euler’s spreadsheet calculator is not interactive as there is no prompt message if there is a mistake in inputting the parameters. On top of that, there are no users’ instructions to guide users to input the derivative function. Hence, in this paper, we improved previous limitations by developing a user-friendly and interactive graphical user interface. This improvement is aimed to capture users’ input with users’ instructions and interactive prompt error messages by using VBA programming. This Euler’s graphical user interface spreadsheet calculator is not acted as a black box as users can click on any cells in the worksheet to see the formula used to implement the numerical scheme. In this way, it could enhance self-learning and life-long learning in implementing the numerical scheme in a spreadsheet and later in any programming language.

Leveraging technology and staffing in developing a new liaison program.

PubMed

Williams, Jeff; McCrillis, Aileen; McGowan, Richard; Nicholson, Joey; Surkis, Alisa; Thompson, Holly; Vieira, Dorice

2014-01-01

With nearly all library resources and services delivered digitally, librarians working for the New York University Health Sciences Library struggled with maintaining awareness of changing user needs, understanding barriers faced in using library resources and services, and determining knowledge management challenges across the organization. A liaison program was created to provide opportunities for librarians to meaningfully engage with users. The program was directed toward a subset of high-priority user groups to provide focused engagement with these users. Responsibility for providing routine reference service was reduced for liaison librarians to provide maximum time to engage with their assigned user communities.

User Interface Technology for Formal Specification Development

NASA Technical Reports Server (NTRS)

Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

1994-01-01

Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.

Design strategies and functionality of the Visual Interface for Virtual Interaction Development (VIVID) tool

NASA Technical Reports Server (NTRS)

Nguyen, Lac; Kenney, Patrick J.

1993-01-01

Development of interactive virtual environments (VE) has typically consisted of three primary activities: model (object) development, model relationship tree development, and environment behavior definition and coding. The model and relationship tree development activities are accomplished with a variety of well-established graphic library (GL) based programs - most utilizing graphical user interfaces (GUI) with point-and-click interactions. Because of this GUI format, little programming expertise on the part of the developer is necessary to create the 3D graphical models or to establish interrelationships between the models. However, the third VE development activity, environment behavior definition and coding, has generally required the greatest amount of time and programmer expertise. Behaviors, characteristics, and interactions between objects and the user within a VE must be defined via command line C coding prior to rendering the environment scenes. In an effort to simplify this environment behavior definition phase for non-programmers, and to provide easy access to model and tree tools, a graphical interface and development tool has been created. The principal thrust of this research is to effect rapid development and prototyping of virtual environments. This presentation will discuss the 'Visual Interface for Virtual Interaction Development' (VIVID) tool; an X-Windows based system employing drop-down menus for user selection of program access, models, and trees, behavior editing, and code generation. Examples of these selection will be highlighted in this presentation, as will the currently available program interfaces. The functionality of this tool allows non-programming users access to all facets of VE development while providing experienced programmers with a collection of pre-coded behaviors. In conjunction with its existing, interfaces and predefined suite of behaviors, future development plans for VIVID will be described. These include incorporation of dual user virtual environment enhancements, tool expansion, and additional behaviors.

ESPVI 4.0 ELECTROSTATIS PRECIPITATOR V-1 AND PERFORMANCE MODEL: USER'S MANUAL

EPA Science Inventory

The manual is the companion document for the microcomputer program ESPVI 4.0, Electrostatic Precipitation VI and Performance Model. The program was developed to provide a user- friendly interface to an advanced model of electrostatic precipitation (ESP) performance. The program i...

CASKS (Computer Analysis of Storage casKS): A microcomputer based analysis system for storage cask design review. User`s manual to Version 1b (including program reference)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, T.F.; Gerhard, M.A.; Trummer, D.J.

CASKS (Computer Analysis of Storage casKS) is a microcomputer-based system of computer programs and databases developed at the Lawrence Livermore National Laboratory (LLNL) for evaluating safety analysis reports on spent-fuel storage casks. The bulk of the complete program and this user`s manual are based upon the SCANS (Shipping Cask ANalysis System) program previously developed at LLNL. A number of enhancements and improvements were added to the original SCANS program to meet requirements unique to storage casks. CASKS is an easy-to-use system that calculates global response of storage casks to impact loads, pressure loads and thermal conditions. This provides reviewers withmore » a tool for an independent check on analyses submitted by licensees. CASKS is based on microcomputers compatible with the IBM-PC family of computers. The system is composed of a series of menus, input programs, cask analysis programs, and output display programs. All data is entered through fill-in-the-blank input screens that contain descriptive data requests.« less

CAI System with Multi-Media Text Through Web Browser for NC Lathe Programming

NASA Astrophysics Data System (ADS)

Mizugaki, Yoshio; Kikkawa, Koichi; Mizui, Masahiko; Kamijo, Keisuke

A new Computer Aided Instruction (CAI) system for NC lathe programming has been developed with use of multi-media texts including movies, animations, pictures, sound and texts through Web browser. Although many CAI systems developed previously for NC programming consist of text-based instructions, it is difficult for beginners to learn NC programming with use of them. In the developed CAI system, multi-media texts are adopted for the help of users' understanding, and it is available through Web browser anytime and anywhere. Also the error log is automatically recorded for the future references. According to the NC programming coded by a user, the movement of the NC lathe is animated and shown in the monitor screen in front of the user. If its movement causes the collision between a cutting tool and the lathe, some sound and the caution remark are generated. If the user makes mistakes some times at a certain stage in learning NC, the corresponding suggestion is shown in the form of movies, animations, and so forth. By using the multimedia texts, users' attention is kept concentrated during a training course. In this paper, the configuration of the CAI system is explained and the actual procedures for users to learn the NC programming are also explained too. Some beginners tested this CAI system and their results are illustrated and discussed from the viewpoint of the efficiency and usefulness of this CAI system. A brief conclusion is also mentioned.

Software for Partly Automated Recognition of Targets

NASA Technical Reports Server (NTRS)

Opitz, David; Blundell, Stuart; Bain, William; Morris, Matthew; Carlson, Ian; Mangrich, Mark; Selinsky, T.

2002-01-01

The Feature Analyst is a computer program for assisted (partially automated) recognition of targets in images. This program was developed to accelerate the processing of high-resolution satellite image data for incorporation into geographic information systems (GIS). This program creates an advanced user interface that embeds proprietary machine-learning algorithms in commercial image-processing and GIS software. A human analyst provides samples of target features from multiple sets of data, then the software develops a data-fusion model that automatically extracts the remaining features from selected sets of data. The program thus leverages the natural ability of humans to recognize objects in complex scenes, without requiring the user to explain the human visual recognition process by means of lengthy software. Two major subprograms are the reactive agent and the thinking agent. The reactive agent strives to quickly learn the user's tendencies while the user is selecting targets and to increase the user's productivity by immediately suggesting the next set of pixels that the user may wish to select. The thinking agent utilizes all available resources, taking as much time as needed, to produce the most accurate autonomous feature-extraction model possible.

Real-Time Multiprocessor Programming Language (RTMPL) user's manual

NASA Technical Reports Server (NTRS)

Arpasi, D. J.

1985-01-01

A real-time multiprocessor programming language (RTMPL) has been developed to provide for high-order programming of real-time simulations on systems of distributed computers. RTMPL is a structured, engineering-oriented language. The RTMPL utility supports a variety of multiprocessor configurations and types by generating assembly language programs according to user-specified targeting information. Many programming functions are assumed by the utility (e.g., data transfer and scaling) to reduce the programming chore. This manual describes RTMPL from a user's viewpoint. Source generation, applications, utility operation, and utility output are detailed. An example simulation is generated to illustrate many RTMPL features.

Development of multiple user AMTRAN on the Datacraft DC6024

NASA Technical Reports Server (NTRS)

Austin, S. L.

1973-01-01

A multiple user version of AMTRAn was implemented on the Datacraft DC6024 computer is reported. The major portion of the multiple user logic is incorporated in the main program which remains in core during all AMTRAN processes. A detailed flowchart of the main program is provided as documentation of the multiple user capability. Activities are directed toward perfecting its capability, providing new features in response to user needs and requests, providing a two-dimensional array AMTRAN containing multiple user logic, and providing documentation as the tasks progress.

Impacts of Outer Continental Shelf (OCS) development on recreation and tourism. Volume 4. User's manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The final report for the project is presented in five volumes. The project sought to determine the impact of Outer Continental Shelf development on recreation and tourism in California. This volume is the User's Guide. It includes the following topics: Introduction and Summary Guide; Input Data Files; Gravity Model Programs; Economic Effects Model Programs; Consumer Surplus Model Programs; References; and Appendices.

A Formal Approach to Domain-Oriented Software Design Environments

NASA Technical Reports Server (NTRS)

Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

1994-01-01

This paper describes a formal approach to domain-oriented software design environments, based on declarative domain theories, formal specifications, and deductive program synthesis. A declarative domain theory defines the semantics of a domain-oriented specification language and its relationship to implementation-level subroutines. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that guides them in creating diagrams denoting formal specifications. The diagrams also serve to document the specifications. Deductive program synthesis ensures that end-user specifications are correctly implemented. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory, which includes an axiomatization of JPL's SPICELIB subroutine library. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development. Furthermore, AMPHION synthesizes one to two page programs consisting of calls to SPICELIB subroutines from these specifications in just a few minutes. Test results obtained by metering AMPHION's deductive program synthesis component are examined. AMPHION has been installed at JPL and is currently undergoing further refinement in preparation for distribution to hundreds of SPICELIB users worldwide. Current work to support end-user customization of AMPHION's specification acquisition subsystem is briefly discussed, as well as future work to enable domain-expert creation of new AMPHION applications through development of suitable domain theories.

Usability evaluation of user interface of thesis title review system

NASA Astrophysics Data System (ADS)

Tri, Y.; Erna, A.; Gellysa, U.

2018-03-01

Presentation of programs with user interface that can be accessed online through the website of course greatly provide user benefits. User can easily access the program they need. There are usability values that serve as a benchmark for the success of a user accessible program, ie efficiency, effectiveness, and convenience. These usability values also determine the development of the program for the better use. Therefore, on the review title thesis program that will be implemented in STT Dumai was measured usability evaluation. It aims to see which sides are not yet perfect and need to be improved to improve the performance and utilization of the program. Usability evaluation was measured by using smartPLS software. Database used was the result of respondent questionnaires that include questions about the experience when they used program. The result of a review of thesis title program implemented in STT Dumai has an efficiency value of 22.615, the effectiveness of 20.612, and satisfaction of 33.177.

A Methodology and a Web Platform for the Collaborative Development of Context-Aware Systems

PubMed Central

Martín, David; López-de-Ipiña, Diego; Alzua-Sorzabal, Aurkene; Lamsfus, Carlos; Torres-Manzanera, Emilio

2013-01-01

Information and services personalization is essential for an optimal user experience. Systems have to be able to acquire data about the user's context, process them in order to identify the user's situation and finally, adapt the functionality of the system to that situation, but the development of context-aware systems is complex. Data coming from distributed and heterogeneous sources have to be acquired, processed and managed. Several programming frameworks have been proposed in order to simplify the development of context-aware systems. These frameworks offer high-level application programming interfaces for programmers that complicate the involvement of domain experts in the development life-cycle. The participation of users that do not have programming skills but are experts in the application domain can speed up and improve the development process of these kinds of systems. Apart from that, there is a lack of methodologies to guide the development process. This article presents as main contributions, the implementation and evaluation of a web platform and a methodology to collaboratively develop context-aware systems by programmers and domain experts. PMID:23666131

Simulator: A Pilot Interactive Simulation Program for Use in Teaching Public Relations.

ERIC Educational Resources Information Center

Pavlik, John V.

An interactive simulation program was developed for use in teaching students how to handle public relations problems. The program user is placed in the role of assistant newsletter editor, facing a series of decision-making situations. Each choice the user makes affects the subsequent reality created by the program, which is designed to provide…

Medical Applications of the PHITS Code (3): User Assistance Program for Medical Physics Computation.

PubMed

Furuta, Takuya; Hashimoto, Shintaro; Sato, Tatsuhiko

2016-01-01

DICOM2PHITS and PSFC4PHITS are user assistance programs for medical physics PHITS applications. DICOM2PHITS is a program to construct the voxel PHITS simulation geometry from patient CT DICOM image data by using a conversion table from CT number to material composition. PSFC4PHITS is a program to convert the IAEA phase-space file data to PHITS format to be used as a simulation source of PHITS. Both of the programs are useful for users who want to apply PHITS simulation to verification of the treatment planning of radiation therapy. We are now developing a program to convert dose distribution obtained by PHITS to DICOM RT-dose format. We also want to develop a program which is able to implement treatment information included in other DICOM files (RT-plan and RT-structure) as a future plan.

76 FR 33307 - Generic Drug User Fee; Notice of Public Meeting; Extension of Comment Period

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

...] Generic Drug User Fee; Notice of Public Meeting; Extension of Comment Period AGENCY: Food and Drug... on the development of a generic drug user fee program. The Agency is taking this action to allow..., 75 FR 47820, FDA published a notice soliciting comment on development of a generic drug user fee...

Development of a Simple Image Processing Application that Makes Abdominopelvic Tumor Visible on Positron Emission Tomography/Computed Tomography Image.

PubMed

Pandey, Anil Kumar; Saroha, Kartik; Sharma, Param Dev; Patel, Chetan; Bal, Chandrashekhar; Kumar, Rakesh

2017-01-01

In this study, we have developed a simple image processing application in MATLAB that uses suprathreshold stochastic resonance (SSR) and helps the user to visualize abdominopelvic tumor on the exported prediuretic positron emission tomography/computed tomography (PET/CT) images. A brainstorming session was conducted for requirement analysis for the program. It was decided that program should load the screen captured PET/CT images and then produces output images in a window with a slider control that should enable the user to view the best image that visualizes the tumor, if present. The program was implemented on personal computer using Microsoft Windows and MATLAB R2013b. The program has option for the user to select the input image. For the selected image, it displays output images generated using SSR in a separate window having a slider control. The slider control enables the user to view images and select one which seems to provide the best visualization of the area(s) of interest. The developed application enables the user to select, process, and view output images in the process of utilizing SSR to detect the presence of abdominopelvic tumor on prediuretic PET/CT image.

AXAF user interfaces for heterogeneous analysis environments

NASA Technical Reports Server (NTRS)

Mandel, Eric; Roll, John; Ackerman, Mark S.

1992-01-01

The AXAF Science Center (ASC) will develop software to support all facets of data center activities and user research for the AXAF X-ray Observatory, scheduled for launch in 1999. The goal is to provide astronomers with the ability to utilize heterogeneous data analysis packages, that is, to allow astronomers to pick the best packages for doing their scientific analysis. For example, ASC software will be based on IRAF, but non-IRAF programs will be incorporated into the data system where appropriate. Additionally, it is desired to allow AXAF users to mix ASC software with their own local software. The need to support heterogeneous analysis environments is not special to the AXAF project, and therefore finding mechanisms for coordinating heterogeneous programs is an important problem for astronomical software today. The approach to solving this problem has been to develop two interfaces that allow the scientific user to run heterogeneous programs together. The first is an IRAF-compatible parameter interface that provides non-IRAF programs with IRAF's parameter handling capabilities. Included in the interface is an application programming interface to manipulate parameters from within programs, and also a set of host programs to manipulate parameters at the command line or from within scripts. The parameter interface has been implemented to support parameter storage formats other than IRAF parameter files, allowing one, for example, to access parameters that are stored in data bases. An X Windows graphical user interface called 'agcl' has been developed, layered on top of the IRAF-compatible parameter interface, that provides a standard graphical mechanism for interacting with IRAF and non-IRAF programs. Users can edit parameters and run programs for both non-IRAF programs and IRAF tasks. The agcl interface allows one to communicate with any command line environment in a transparent manner and without any changes to the original environment. For example, the authors routinely layer the GUI on top of IRAF, ksh, SMongo, and IDL. The agcl, based on the facilities of a system called Answer Garden, also has sophisticated support for examining documentation and help files, asking questions of experts, and developing a knowledge base of frequently required information. Thus, the GUI becomes a total environment for running programs, accessing information, examining documents, and finding human assistance. Because the agcl can communicate with any command-line environment, most projects can make use of it easily. New applications are continually being found for these interfaces. It is the authors' intention to evolve the GUI and its underlying parameter interface in response to these needs - from users as well as developers - throughout the astronomy community. This presentation describes the capabilities and technology of the above user interface mechanisms and tools. It also discusses the design philosophies guiding the work, as well as hopes for the future.

Advanced software development workstation. Engineering scripting language graphical editor: DRAFT design document

NASA Technical Reports Server (NTRS)

1991-01-01

The Engineering Scripting Language (ESL) is a language designed to allow nonprogramming users to write Higher Order Language (HOL) programs by drawing directed graphs to represent the program and having the system generate the corresponding program in HOL. The ESL system supports user generation of HOL programs through the manipulation of directed graphs. The components of this graphs (nodes, ports, and connectors) are objects each of which has its own properties and property values. The purpose of the ESL graphical editor is to allow the user to create or edit graph objects which represent programs.

A Web interface generator for molecular biology programs in Unix.

PubMed

Letondal, C

2001-01-01

Almost all users encounter problems using sequence analysis programs. Not only are they difficult to learn because of the parameters, syntax and semantic, but many are different. That is why we have developed a Web interface generator for more than 150 molecular biology command-line driven programs, including: phylogeny, gene prediction, alignment, RNA, DNA and protein analysis, motif discovery, structure analysis and database searching programs. The generator uses XML as a high-level description language of the legacy software parameters. Its aim is to provide users with the equivalent of a basic Unix environment, with program combination, customization and basic scripting through macro registration. The program has been used for three years by about 15000 users throughout the world; it has recently been installed on other sites and evaluated as a standard user interface for EMBOSS programs.

Web Based Information System for Job Training Activities Using Personal Extreme Programming (PXP)

NASA Astrophysics Data System (ADS)

Asri, S. A.; Sunaya, I. G. A. M.; Rudiastari, E.; Setiawan, W.

2018-01-01

Job training is one of the subjects in university or polytechnic that involves many users and reporting activities. Time and distance became problems for users to reporting and to do obligations tasks during job training due to the location where the job training took place. This research tried to develop a web based information system of job training to overcome the problems. This system was developed using Personal Extreme Programming (PXP). PXP is one of the agile methods is combination of Extreme Programming (XP) and Personal Software Process (PSP). The information system that has developed and tested which are 24% of users are strongly agree, 74% are agree, 1% disagree and 0% strongly disagree about system functionality.

Proceedings of the Workshop on Software Engineering Foundations for End-User Programming (SEEUP 2009)

DTIC Science & Technology

2009-11-01

interest of scientific and technical information exchange. This work is sponsored by the U.S. Department of Defense. The Software Engineering Institute is a...an interesting conti- nuum between how many different requirements a program must satisfy: the more complex and diverse the requirements, the more... Gender differences in approaches to end-user software development have also been reported in debugging feature usage [1] and in end-user web programming

An analysis for high speed propeller-nacelle aerodynamic performance prediction. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Egolf, T. Alan; Anderson, Olof L.; Edwards, David E.; Landgrebe, Anton J.

1988-01-01

A user's manual for the computer program developed for the prediction of propeller-nacelle aerodynamic performance reported in, An Analysis for High Speed Propeller-Nacelle Aerodynamic Performance Prediction: Volume 1 -- Theory and Application, is presented. The manual describes the computer program mode of operation requirements, input structure, input data requirements and the program output. In addition, it provides the user with documentation of the internal program structure and the software used in the computer program as it relates to the theory presented in Volume 1. Sample input data setups are provided along with selected printout of the program output for one of the sample setups.

Scheduling language and algorithm development study. Volume 2, phase 2: Introduction to plans programming. [user guide

NASA Technical Reports Server (NTRS)

Cochran, D. R.; Ishikawa, M. K.; Paulson, R. E.; Ramsey, H. R.

1975-01-01

A user guide for the Programming Language for Allocation and Network Scheduling (PLANS) is presented. Information is included for the construction of PLANS programs. The basic philosophy of PLANS is discussed, and access and update reference techniques are described along with the use of tree structures.

MOO in Your Face: Researching, Designing, and Programming a User-Friendly Interface.

ERIC Educational Resources Information Center

Haas, Mark; Gardner, Clinton

1999-01-01

Suggests the learning curve of a multi-user, object-oriented domain (MOO) blockades effective use. Discusses use of an IBM/PC-compatible interface that allows developers to modify the interface to provide a sense of presence for the user. Concludes that work in programming a variety of interfaces has led to a more intuitive environment for…

Software for Partly Automated Recognition of Targets

NASA Technical Reports Server (NTRS)

Opitz, David; Blundell, Stuart; Bain, William; Morris, Matthew; Carlson, Ian; Mangrich, Mark

2003-01-01

The Feature Analyst is a computer program for assisted (partially automated) recognition of targets in images. This program was developed to accelerate the processing of high-resolution satellite image data for incorporation into geographic information systems (GIS). This program creates an advanced user interface that embeds proprietary machine-learning algorithms in commercial image-processing and GIS software. A human analyst provides samples of target features from multiple sets of data, then the software develops a data-fusion model that automatically extracts the remaining features from selected sets of data. The program thus leverages the natural ability of humans to recognize objects in complex scenes, without requiring the user to explain the human visual recognition process by means of lengthy software. Two major subprograms are the reactive agent and the thinking agent. The reactive agent strives to quickly learn the user s tendencies while the user is selecting targets and to increase the user s productivity by immediately suggesting the next set of pixels that the user may wish to select. The thinking agent utilizes all available resources, taking as much time as needed, to produce the most accurate autonomous feature-extraction model possible.

Visual gene developer: a fully programmable bioinformatics software for synthetic gene optimization.

PubMed

Jung, Sang-Kyu; McDonald, Karen

2011-08-16

Direct gene synthesis is becoming more popular owing to decreases in gene synthesis pricing. Compared with using natural genes, gene synthesis provides a good opportunity to optimize gene sequence for specific applications. In order to facilitate gene optimization, we have developed a stand-alone software called Visual Gene Developer. The software not only provides general functions for gene analysis and optimization along with an interactive user-friendly interface, but also includes unique features such as programming capability, dedicated mRNA secondary structure prediction, artificial neural network modeling, network & multi-threaded computing, and user-accessible programming modules. The software allows a user to analyze and optimize a sequence using main menu functions or specialized module windows. Alternatively, gene optimization can be initiated by designing a gene construct and configuring an optimization strategy. A user can choose several predefined or user-defined algorithms to design a complicated strategy. The software provides expandable functionality as platform software supporting module development using popular script languages such as VBScript and JScript in the software programming environment. Visual Gene Developer is useful for both researchers who want to quickly analyze and optimize genes, and those who are interested in developing and testing new algorithms in bioinformatics. The software is available for free download at http://www.visualgenedeveloper.net.

Visual gene developer: a fully programmable bioinformatics software for synthetic gene optimization

PubMed Central

2011-01-01

Background Direct gene synthesis is becoming more popular owing to decreases in gene synthesis pricing. Compared with using natural genes, gene synthesis provides a good opportunity to optimize gene sequence for specific applications. In order to facilitate gene optimization, we have developed a stand-alone software called Visual Gene Developer. Results The software not only provides general functions for gene analysis and optimization along with an interactive user-friendly interface, but also includes unique features such as programming capability, dedicated mRNA secondary structure prediction, artificial neural network modeling, network & multi-threaded computing, and user-accessible programming modules. The software allows a user to analyze and optimize a sequence using main menu functions or specialized module windows. Alternatively, gene optimization can be initiated by designing a gene construct and configuring an optimization strategy. A user can choose several predefined or user-defined algorithms to design a complicated strategy. The software provides expandable functionality as platform software supporting module development using popular script languages such as VBScript and JScript in the software programming environment. Conclusion Visual Gene Developer is useful for both researchers who want to quickly analyze and optimize genes, and those who are interested in developing and testing new algorithms in bioinformatics. The software is available for free download at http://www.visualgenedeveloper.net. PMID:21846353

Program Aids Analysis And Optimization Of Design

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Lamarsh, William J., II

1994-01-01

NETS/ PROSSS (NETS Coupled With Programming System for Structural Synthesis) computer program developed to provide system for combining NETS (MSC-21588), neural-network application program and CONMIN (Constrained Function Minimization, ARC-10836), optimization program. Enables user to reach nearly optimal design. Design then used as starting point in normal optimization process, possibly enabling user to converge to optimal solution in significantly fewer iterations. NEWT/PROSSS written in C language and FORTRAN 77.

Physician-directed software design: the role of utilization statistics and user input in enhancing HELP results review capabilities.

PubMed

Michael, P A

1993-01-01

The M.D. Rounds Report program was developed and implemented in June of 1992 as an adjunct to the HELP System at Rex Hospital. The program facilitates rapid access to information on allergies and current medications, laboratory results, radiology reports and therapist notes for a list of patients without physicians having to make additional menu or submenu selections. In planning for an upgrade of the program, utilization statistics and user feedback provided valuable information in terms of frequency of access, features used and unused, and the value of the program as a reporting tool in comparison to other online results reporting applications. A brief description of the functionality of the M.D. Rounds Report, evaluation of the program audit trail and user feedback, planned enhancements to the program, and a discussion of the prototyping and monitoring experience and the impact on future physician subsystem development will be presented.

Computer program development and user's manual for program PARACH. [to investigate parachute spent solid rocket booster during terminal descent

NASA Technical Reports Server (NTRS)

Murphree, H. I.

1979-01-01

A user's manual is provided for program PARACH, a FORTRAN digital computer program operational on the Univac 1108. A description of the program and operating instructions for it are included. Program PARACH is used to study the interaction dynamics of a parachute and its payload during terminal descent. Operating instructions, required input data, program options and limitations, and output data are described. Subroutines used in this program are also listed and explained.

The Basis System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dubois, P.F.

1989-05-16

This paper discusses the basis system. Basis is a program development system for scientific programs. It has been developed over the last five years at Lawrence Livermore National Laboratory (LLNL), where it is now used in about twenty major programming efforts. The Basis System includes two major components, a program development system and a run-time package. The run-time package provides the Basis Language interpreter, through which the user does input, output, plotting, and control of the program's subroutines and functions. Variables in the scientific packages are known to this interpreter, so that the user may arbitrarily print, plot, and calculatemore » with, any major program variables. Also provided are facilities for dynamic memory management, terminal logs, error recovery, text-file i/o, and the attachment of non-Basis-developed packages.« less

Program For Generating Interactive Displays

NASA Technical Reports Server (NTRS)

Costenbader, Jay; Moleski, Walt; Szczur, Martha; Howell, David; Engelberg, Norm; Li, Tin P.; Misra, Dharitri; Miller, Philip; Neve, Leif; Wolf, Karl;

NASTRAN users' experience of Avco Aerostructures Division

NASA Technical Reports Server (NTRS)

Blackburn, C. L.; Wilhelm, C. A.

1973-01-01

The NASTRAN experiences of a major structural design and fabrication subcontractor that has less engineering personnel and computer facilities than those available to large prime contractors are discussed. Efforts to obtain sufficient computer capacity and the development and implementation of auxiliary programs to reduce manpower requirements are described. Applications of the NASTRAN program for training users, checking out auxiliary programs, performing in-house research and development, and structurally analyzing an Avco designed and manufactured missile case are presented.

Software Implemented Fault-Tolerant (SIFT) user's guide

NASA Technical Reports Server (NTRS)

Green, D. F., Jr.; Palumbo, D. L.; Baltrus, D. W.

1984-01-01

Program development for a Software Implemented Fault Tolerant (SIFT) computer system is accomplished in the NASA LaRC AIRLAB facility using a DEC VAX-11 to interface with eight Bendix BDX 930 flight control processors. The interface software which provides this SIFT program development capability was developed by AIRLAB personnel. This technical memorandum describes the application and design of this software in detail, and is intended to assist both the user in performance of SIFT research and the systems programmer responsible for maintaining and/or upgrading the SIFT programming environment.

A preliminary report of music-based training for adult cochlear implant users: Rationales and development.

PubMed

Gfeller, Kate; Guthe, Emily; Driscoll, Virginia; Brown, Carolyn J

2015-09-01

This paper provides a preliminary report of a music-based training program for adult cochlear implant (CI) recipients. Included in this report are descriptions of the rationale for music-based training, factors influencing program development, and the resulting program components. Prior studies describing experience-based plasticity in response to music training, auditory training for persons with hearing impairment, and music training for CI recipients were reviewed. These sources revealed rationales for using music to enhance speech, factors associated with successful auditory training, relevant aspects of electric hearing and music perception, and extant evidence regarding limitations and advantages associated with parameters for music training with CI users. This informed the development of a computer-based music training program designed specifically for adult CI users. Principles and parameters for perceptual training of music, such as stimulus choice, rehabilitation approach, and motivational concerns were developed in relation to the unique auditory characteristics of adults with electric hearing. An outline of the resulting program components and the outcome measures for evaluating program effectiveness are presented. Music training can enhance the perceptual accuracy of music, but is also hypothesized to enhance several features of speech with similar processing requirements as music (e.g., pitch and timbre). However, additional evaluation of specific training parameters and the impact of music-based training on speech perception of CI users is required.

A preliminary report of music-based training for adult cochlear implant users: rationales and development

PubMed Central

Gfeller, Kate; Guthe, Emily; Driscoll, Virginia; Brown, Carolyn J.

2015-01-01

Objective This paper provides a preliminary report of a music-based training program for adult cochlear implant (CI) recipients. Included in this report are descriptions of the rationale for music-based training, factors influencing program development, and the resulting program components. Methods Prior studies describing experience-based plasticity in response to music training, auditory training for persons with hearing impairment, and music training for cochlear implant recipients were reviewed. These sources revealed rationales for using music to enhance speech, factors associated with successful auditory training, relevant aspects of electric hearing and music perception, and extant evidence regarding limitations and advantages associated with parameters for music training with CI users. This information formed the development of a computer-based music training program designed specifically for adult CI users. Results Principles and parameters for perceptual training of music, such as stimulus choice, rehabilitation approach, and motivational concerns were developed in relation to the unique auditory characteristics of adults with electric hearing. An outline of the resulting program components and the outcome measures for evaluating program effectiveness are presented. Conclusions Music training can enhance the perceptual accuracy of music, but is also hypothesized to enhance several features of speech with similar processing requirements as music (e.g., pitch and timbre). However, additional evaluation of specific training parameters and the impact of music-based training on speech perception of CI users are required. PMID:26561884

US development and commercialization of a North American mobile satellite service

NASA Technical Reports Server (NTRS)

Arnold, Ray J.; Gray, Valerie; Freibaum, Jerry

1990-01-01

U.S. policies promoting applications and commercialization of space technology for the 'benefit of mankind,' and emphasis on international competitiveness, formed the basis of NASA's Mobile Satellite (MSAT) R&D and user experiments program to develop a commercial U.S. Mobile Satellite Service. Exemplifying this philosophy, the MSAT program targets the reduction of technical, regulatory, market, and financial risks that inhibit commercialization. The program strategy includes industry and user involvement in developing and demonstrating advanced technologies, regulatory advocacy, and financial incentives to industry. Approximately two decades of NASA's satellite communications development and demonstrations have contributed to the emergence of a new multi-billion dollar industry for land, aeronautical, and maritime mobile communications via satellite. NASA's R&D efforts are now evolving from the development of 'enabling' ground technologies for VHF, UHF, and L-Band mobile terminals, to Ka-Band terminals offering additional mobility and user convenience.

Microcomputer spacecraft thermal analysis routines (MSTAR) Phase I: The user interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Teti, N.M.

1993-12-31

The Microcomputer Spacecraft Thermal Analysis Routines (MSTAR) software package is being developed for NASA/Goddard Space Flight Center by Swales and Associates, Inc. (S&AI). In December 1992, S&AI was awarded a phase I Small Business Inovative Research contract fronm NASA to develop a microcomputer based thermal analysis program to replace the current SSPTA and TRASYS programs. Phase I consists of a six month effort which will focus on developing geometric model generation and visualization capabilities using a graphical user interface (GUI). The information contained in this paper encompasses the work performed during the Phase I development cycle; with emphasis on themore » development of the graphical user interface (GUI). This includes both the theory behind and specific examples of how the MSTAR GUI was implemented. Furthermore, this report discusses new applications and enhancements which will improve the capabilities and commercialization of the MSTAR program.« less

Microcomputer spacecraft thermal analysis routines (MSTAR) Phase I: The user interface

NASA Technical Reports Server (NTRS)

Teti, Nicholas M.

1993-01-01

The Microcomputer Spacecraft Thermal Analysis Routines (MSTAR) software package is being developed for NASA/Goddard Space Flight Center by Swales and Associates, Inc. (S&AI). In December 1992, S&AI was awarded a phase I Small Business Inovative Research contract fronm NASA to develop a microcomputer based thermal analysis program to replace the current SSPTA and TRASYS programs. Phase I consists of a six month effort which will focus on developing geometric model generation and visualization capabilities using a graphical user interface (GUI). The information contained in this paper encompasses the work performed during the Phase I development cycle; with emphasis on the development of the graphical user interface (GUI). This includes both the theory behind and specific examples of how the MSTAR GUI was implemented. Furthermore, this report discusses new applications and enhancements which will improve the capabilities and commercialization of the MSTAR program.

A web-based program for informal caregivers of persons with Alzheimer's disease: an iterative user-centered design.

PubMed

Cristancho-Lacroix, Victoria; Moulin, Florence; Wrobel, Jérémy; Batrancourt, Bénédicte; Plichart, Matthieu; De Rotrou, Jocelyne; Cantegreil-Kallen, Inge; Rigaud, Anne-Sophie

2014-09-15

Web-based programs have been developed for informal caregivers of people with Alzheimer's disease (PWAD). However, these programs can prove difficult to adopt, especially for older people, who are less familiar with the Internet than other populations. Despite the fundamental role of usability testing in promoting caregivers' correct use and adoption of these programs, to our knowledge, this is the first study describing this process before evaluating a program for caregivers of PWAD in a randomized clinical trial. The objective of the study was to describe the development process of a fully automated Web-based program for caregivers of PWAD, aiming to reduce caregivers' stress, and based on the user-centered design approach. There were 49 participants (12 health care professionals, 6 caregivers, and 31 healthy older adults) that were involved in a double iterative design allowing for the adaptation of program content and for the enhancement of website usability. This process included three component parts: (1) project team workshops, (2) a proof of concept, and (3) two usability tests. The usability tests were based on a mixed methodology using behavioral analysis, semistructured interviews, and a usability questionnaire. The user-centered design approach provided valuable guidelines to adapt the content and design of the program, and to improve website usability. The professionals, caregivers (mainly spouses), and older adults considered that our project met the needs of isolated caregivers. Participants underlined that contact between caregivers would be desirable. During usability observations, the mistakes of users were also due to ergonomics issues from Internet browsers and computer interfaces. Moreover, negative self-stereotyping was evidenced, when comparing interviews and results of behavioral analysis. Face-to-face psycho-educational programs may be used as a basis for Web-based programs. Nevertheless, a user-centered design approach involving targeted users (or their representatives) remains crucial for their correct use and adoption. For future user-centered design studies, we recommend to involve end-users from preconception stages, using a mixed research method in usability evaluations, and implementing pilot studies to evaluate acceptability and feasibility of programs.

User's operating procedures. Volume 1: Scout project information programs

NASA Technical Reports Server (NTRS)

Harris, C. G.; Harris, D. K.

1985-01-01

A review of the user's operating procedures for the Scout Project Automatic Data System, called SPADS is given. SPADS is the result of the past seven years of software development on a Prime minicomputer located at the Scout Project Office. SPADS was developed as a single entry, multiple cross reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. The instructions to operate the Scout Project Information programs in data retrieval and file maintenance via the user friendly menu drivers is presented.

User's operating procedures. Volume 3: Projects directorate information programs

NASA Technical Reports Server (NTRS)

Haris, C. G.; Harris, D. K.

1985-01-01

A review of the user's operating procedures for the scout project automatic data system, called SPADS is presented. SPADS is the results of the past seven years of software development on a prime mini-computer. SPADS was developed as a single entry, multiple cross-reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. This volume, three of three, provides the instructions to operate the projects directorate information programs in data retrieval and file maintenance via the user friendly menu drivers.

Evaluation of an Internet-Based, Bibliographic Database: Results of the NASA STI Program's ASAP User Test

NASA Technical Reports Server (NTRS)

Reid, John; Egge, Robert; McAfee, Nancy

2000-01-01

This document summarizes the feedback gathered during the user-testing phase in the development of an electronic library application: the Aeronautics and Space Access Pages (ASAP). It first provides some historical background on the NASA Scientific and Technical Information (STI) program and its efforts to enhance the services it offers the aerospace community. Following a brief overview of the ASAP project, it reviews the results of an online user survey, and from the lessons learned therein, outlines direction for future development of the project.

A three-dimensional, compressible, laminar boundary-layer method for general fuselages. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Wie, Yong-Sun

1990-01-01

This user's manual contains a complete description of the computer programs developed to calculate three-dimensional, compressible, laminar boundary layers for perfect gas flow on general fuselage shapes. These programs include the 3-D boundary layer program (3DBLC), the body-oriented coordinate program (BCC), and the streamline coordinate program (SCC). Subroutine description, input, output and sample case are discussed. The complete FORTRAN listings of the computer programs are given.

Actionable Science in the Gulf of Mexico: Connecting Researchers and Resource Managers

NASA Astrophysics Data System (ADS)

Lartigue, J.; Parker, F.; Allee, R.; Young, C.

2017-12-01

The National Oceanic and Atmospheric Administration (NOAA) RESTORE Science Program was established in the wake of the Deepwater Horizon oil spill to to carry out research, observation, and monitoring to support the long-term sustainability of the Gulf of Mexico ecosystem, including its fisheries. Administered in partnership with the US Fish and Wildlife Service, the Science Program emphasizes a connection between science and decision-making. This emphasis translated into an engagement process that allowed for resource managers and other users of information about the ecosystem to provide direct input into the science plan for the program. In developing funding opportunities, the Science Program uses structured conversations with resource managers and other decision makers to focus competitions on specific end user needs. When evaluating proposals for funding, the Science Program uses criteria that focus on applicability of a project's findings and products, end user involvement in project planning, and the approach for transferring findings and products to the end user. By including resource managers alongside scientific experts on its review panels, the Science Program ensures that these criteria are assessed from both the researcher and end user perspectives. Once funding decisions are made, the Science Program assigns a technical monitor to each award to assist with identifying and engaging end users. Sharing of best practices among the technical monitors has provided the Science Program insight on how best to bridge the gap between research and resource management and how to build successful scientist-decision maker partnerships. During the presentation, we will share two case studies: 1) design of a cooperative (fisheries scientist, fisheries managers, and fishers), Gulf-wide conservation and monitoring program for fish spawning aggregations and 2) development of habitat-specific ecosystem indicators for use by federal and state resource managers.

User Working Group Charter

Atmospheric Science Data Center

2014-04-29

... Earth Observing System (EOS) Program through the EOS Data Information System (EOSDIS) Project and the Langley ASDC, located at NASA ... of the ASDC user interface, development of the Information Management System (IMS), and ASDC user conferences requirements for and ...

COMPUTERIZED FGD BYPRODUCT PRODUCTION AND MARKETING SYSTEM: USERS MANUAL

EPA Science Inventory

The users manual describes a computerized system--consisting of a number of integrated programs, models, and data bases--that has been developed to compare the costs of power plant strategies designed to meet clean air regulations. It describes the data bases, programs, and proce...

ERDA-NASA wind energy project ready to involve users

NASA Technical Reports Server (NTRS)

Thomas, R.; Puthoff, R.; Savino, J.; Johnson, W.

1976-01-01

The NASA contribution to the Wind Energy Project is discussed. NASA is responsible for the following: (1) identification of cost-effective configurations and sizes of wind-conversion systems, (2) the development of technology needed to produce these systems, (3) the design of wind-conversion systems that are compatible with user requirements, particularly utility networks, and (4) technology transfer obtained from the program to stimulate rapid commercial application of wind systems. Various elements of the NASA program are outlined, including industry-built user operation, the evaluation phase, the proposed plan and schedule for site selection and user involvement, supporting research and technology (e.g., energy storage), and component and subsystem technology development.

Development of weight/sizing design synthesis computer program. Volume 3: User Manual

NASA Technical Reports Server (NTRS)

Garrison, J. M.

1973-01-01

The user manual for the weight/sizing design synthesis program is presented. The program is applied to an analysis of the basic weight relationships for the space shuttle which contribute significant portions of the inert weight. The relationships measure the parameters of load, geometry, material, and environment. A verbal description of the processes simulated, data input procedures, output data, and values present in the program is included.

Programming Support Library (PSL). Users Manual.

DTIC Science & Technology

1978-05-01

which provides the tools to organize, implement, and control computer program develop- ment. This involves the support of the actual programming process...provides the tools toorganize, implement, and control computer program development. The system is designed specifically to support top-down development...Structured Programming are finding increasing application in the computing community. Structured programs are, however, difficult to write in

NASA Docking System (NDS) Users Guide: International Space Station Program. Type 4

NASA Technical Reports Server (NTRS)

Tabakman, Alexander

2010-01-01

The NASA Docking System (NDS) Users Guide provides an overview of the basic information needed to integrate the NDS onto a Host Vehicle (HV). This Users Guide is intended to provide a vehicle developer with a fundamental understanding of the NDS technical and operations information to support their program and engineering integration planning. The Users Guide identifies the NDS Specification, Interface Definition or Requirement Documents that contain the complete technical details and requirements that a vehicle developer must use to design, develop and verify their systems will interface with NDS. This Guide is an initial reference and must not be used as a design document. In the event of conflict between this Users Guide and other applicable interface definition or requirements documents; the applicable document will take precedence. This Users Guide is organized in three main sections. Chapter 1 provides an overview of the NDS and CDA hardware and the operations concepts for the NDS. Chapter 2 provides information for Host Vehicle Program integration with the NDS Project Office. Chapter 2 describes the NDS Project organization, integration and verification processes, user responsibilities, and specification and interface requirement documents. Chapter 3 provides a summary of basic technical information for the NDS design. Chapter 3 includes NDS hardware component descriptions, physical size and weight characteristics, and summary of the capabilities and constraints for the various NDS sub-systems.

User's guide and description of the streamline divergence computer program. [turbulent convective heat transfer

NASA Technical Reports Server (NTRS)

Sulyma, P. R.; Mcanally, J. V.

1975-01-01

The streamline divergence program was developed to demonstrate the capability to trace inviscid surface streamlines and to calculate outflow-corrected laminar and turbulent convective heating rates on surfaces subjected to exhaust plume impingement. The analytical techniques used in formulating this program are discussed. A brief description of the streamline divergence program is given along with a user's guide. The program input and output for a sample case are also presented.

Development and Evaluation of Innovative Peer-Led Physical Activity Programs for Mental Health Service Users

PubMed Central

Graham, Candida R.; Larstone, Roseann; Griffiths, Brenda; de Leeuw, Sarah; Anderson, Lesley; Powell-Hellyer, Stephanie; Long, Nansi

2017-01-01

Abstract Mental health service users (MHSUs) have elevated rates of cardiometabolic disturbance. Improvements occur with physical activity (PA) programs. We report the development and evaluation of three innovative peer-developed and peer-led PA programs: 1) walking; 2) fitness; and 3) yoga. Qualitative evaluation with 33 MHSUs in British Columbia, Canada, occurred. These programs yielded improvements for participants, highlighted by powerful narratives of health improvement, and improved social connections. The feasibility and acceptability of innovative peer-developed and peer-led programs were shown. Analyses revealed concepts related to engagement and change. Relating core categories, we theorize effective engagement of MHSUs requires accessibility on three levels (geographic, cost, and program flexibility) and health behavior change occurs within co-constituent relationships (to self, to peers, and to the wider community). This study highlights the benefits of peer involvement in developing and implementing PA programs and provides a theoretical framework of understanding engagement and behavior change in health programs for MHSUs. PMID:28953007

LLE 1998 annual report, October 1997--September 1998. Inertial fusion program and National Laser Users` Facility program

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1999-01-01

This report summarizes research at the Laboratory for Laser Energetics (LLE), the operation of the National Laser Users` Facility (NLUF), and programs involving the education of high school, undergraduate, and graduate students for FY98. Research summaries cover: progress in laser fusion; diagnostic development; laser and optical technology; and advanced technology for laser targets.

Building Program Models Incrementally from Informal Descriptions.

DTIC Science & Technology

1979-10-01

specified at each step. Since the user controls the interaction, the user may determine the order in which information flows into PMB. Information is received...until only ten years ago the term aautomatic programming" referred to the development of the assemblers, macro expanders, and compilers for these

Peer Assistance Program for Teenage Substance Users.

ERIC Educational Resources Information Center

Stanbrook, Linda M.

A peer assistance program for teenage substance users was developed in which students interviewed their peers to determine substance use attitudes and frequency of substance use. Student interviewers read and studied drug curriculum materials in their health class; were taught active listening skills and counseling techniques; practiced answering…

[Development of a predictive program for microbial growth under various temperature conditions].

PubMed

Fujikawa, Hiroshi; Yano, Kazuyoshi; Morozumi, Satoshi; Kimura, Bon; Fujii, Tateo

2006-12-01

A predictive program for microbial growth under various temperature conditions was developed with a mathematical model. The model was a new logistic model recently developed by us. The program predicts Escherichia coli growth in broth, Staphylococcus aureus growth and its enterotoxin production in milk, and Vibrio parahaemolyticus growth in broth at various temperature patterns. The program, which was built with Microsoft Excel (Visual Basic Application), is user-friendly; users can easily input the temperature history of a test food and obtain the prediction instantly on the computer screen. The predicted growth and toxin production can be important indices to determine whether a food is microbiologically safe or not. This program should be a useful tool to confirm the microbial safety of commercial foods.

Software to model AXAF image quality

NASA Technical Reports Server (NTRS)

Ahmad, Anees

1993-01-01

This draft final report describes the work performed under this delivery order from May 1992 through June 1993. The purpose of this contract was to enhance and develop an integrated optical performance modeling software for complex x-ray optical systems such as AXAF. The GRAZTRACE program developed by the MSFC Optical Systems Branch for modeling VETA-I was used as the starting baseline program. The original program was a large single file program and, therefore, could not be modified very efficiently. The original source code has been reorganized, and a 'Make Utility' has been written to update the original program. The new version of the source code consists of 36 small source files to make it easier for the code developer to manage and modify the program. A user library has also been built and a 'Makelib' utility has been furnished to update the library. With the user library, the users can easily access the GRAZTRACE source files and build a custom library. A user manual for the new version of GRAZTRACE has been compiled. The plotting capability for the 3-D point spread functions and contour plots has been provided in the GRAZTRACE using the graphics package DISPLAY. The Graphics emulator over the network has been set up for programming the graphics routine. The point spread function and the contour plot routines have also been modified to display the plot centroid, and to allow the user to specify the plot range, and the viewing angle options. A Command Mode version of GRAZTRACE has also been developed. More than 60 commands have been implemented in a Code-V like format. The functions covered in this version include data manipulation, performance evaluation, and inquiry and setting of internal parameters. The user manual for these commands has been formatted as in Code-V, showing the command syntax, synopsis, and options. An interactive on-line help system for the command mode has also been accomplished to allow the user to find valid commands, command syntax, and command function. A translation program has been written to convert FEA output from structural analysis to GRAZTRACE surface deformation file (.dfm file). The program can accept standard output files and list files from COSMOS/M and NASTRAN finite analysis programs. Some interactive options are also provided, such as Cartesian or cylindrical coordinate transformation, coordinate shift and scale, and axial length change. A computerized database for technical documents relating to the AXAF project has been established. Over 5000 technical documents have been entered into the master database. A user can now rapidly retrieve the desired documents relating to the AXAF project. The summary of the work performed under this contract is shown.

The Weatherization Assistant User's Manual (Version 8.9)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gettings, Michael B.; Malhotra, Mini; Ternes, Mark P.

The Weatherization Assistant is a Windows-based energy audit software tool that was developed by Oak Ridge National Laboratory (ORNL) to help states and their local weatherization agencies implement the U.S. Department of Energy (DOE) Weatherization Assistance Program. The Weatherization Assistant is an umbrella program for two individual energy audits or measure selection programs: the National Energy Audit Tool (NEAT) for site-built single-family homes and the Manufactured Home Energy Audit (MHEA) for mobile homes. The Weatherization Assistant User's Manual documents the operation of the user interface for Version 8.9 of the software. This includes how to install and setup the software,more » navigate through the program, and initiate an energy audit. All of the user interface forms associated with the software and the data fields on these forms are described in detail. The manual is intended to be a training manual for new users of the Weatherization Assistant and as a reference manual for experienced users.« less

The evaluation of OSTA's APT and ASVT programs

NASA Technical Reports Server (NTRS)

1981-01-01

The results of an evaluation of NASA's Applications Pilot Test (APT) and Applications System Verification and Transfer (AVST) Programs are presented. These programs sponsor cooperative projects between NASA and potential users of remote sensing (primarily LANDSAT) technology from federal and state government and the private sector. Fifteen specific projects, seven APT's and eight ASVT's, are examined as mechanisms for technology development, test, and transfer by comparing their results against stated objectives. Interviews with project managers from NASA field centers and user agency representatives provide the basis for project evaluation from NASA and user perspectives.

A progress report on a NASA research program for embedded computer systems software

NASA Technical Reports Server (NTRS)

Foudriat, E. C.; Senn, E. H.; Will, R. W.; Straeter, T. A.

1979-01-01

The paper presents the results of the second stage of the Multipurpose User-oriented Software Technology (MUST) program. Four primary areas of activities are discussed: programming environment, HAL/S higher-order programming language support, the Integrated Verification and Testing System (IVTS), and distributed system language research. The software development environment is provided by the interactive software invocation system. The higher-order programming language (HOL) support chosen for consideration is HAL/S mainly because at the time it was one of the few HOLs with flight computer experience and it is the language used on the Shuttle program. The overall purpose of IVTS is to provide a 'user-friendly' software testing system which is highly modular, user controlled, and cooperative in nature.

Adherence to Standards in the Development of E-Learning Programs

ERIC Educational Resources Information Center

Novacek, Paul F.

2016-01-01

Consistent user interface standards are necessary with the development of e-learning courseware, as they are the glue that binds the users' experience with their expectations. For example, the user controls for video playback were standardized many years ago, and we all benefit knowing a right-facing triangle signifies a play function, while dual…

Physician-directed software design: the role of utilization statistics and user input in enhancing HELP results review capabilities.

PubMed Central

Michael, P. A.

1993-01-01

The M.D. Rounds Report program was developed and implemented in June of 1992 as an adjunct to the HELP System at Rex Hospital. The program facilitates rapid access to information on allergies and current medications, laboratory results, radiology reports and therapist notes for a list of patients without physicians having to make additional menu or submenu selections. In planning for an upgrade of the program, utilization statistics and user feedback provided valuable information in terms of frequency of access, features used and unused, and the value of the program as a reporting tool in comparison to other online results reporting applications. A brief description of the functionality of the M.D. Rounds Report, evaluation of the program audit trail and user feedback, planned enhancements to the program, and a discussion of the prototyping and monitoring experience and the impact on future physician subsystem development will be presented. PMID:8130443

Utilizing computerized entertainment education in the development of decision aids for lower literate and naïve computer users.

PubMed

Jibaja-Weiss, Maria L; Volk, Robert J

2007-01-01

Decision aids have been developed by using various delivery methods, including interactive computer programs. Such programs, however, still rely heavily on written information, health and digital literacy, and reading ease. We describe an approach to overcome these potential barriers for low-literate, underserved populations by making design considerations for poor readers and naïve computer users and by using concepts from entertainment education to engage the user and to contextualize the content for the user. The system design goals are to make the program both didactic and entertaining and the navigation and graphical user interface as simple as possible. One entertainment education strategy, the soap opera, is linked seamlessly to interactive learning modules to enhance the content of the soap opera episodes. The edutainment decision aid model (EDAM) guides developers through the design process. Although designing patient decision aids that are educational, entertaining, and targeted toward poor readers and those with limited computer skills is a complex task, it is a promising strategy for aiding this population. Entertainment education may be a highly effective approach to promoting informed decision making for patients with low health literacy.

GEOSTATISTICS FOR WASTE MANAGEMENT: A USER'S MANUEL FOR THE GEOPACK (VERSION 1.0) GEOSTATISTICAL SOFTWARE SYSTEM

EPA Science Inventory

A comprehensive, user-friendly geostatistical software system called GEOPACk has been developed. The purpose of this software is to make available the programs necessary to undertake a geostatistical analysis of spatially correlated data. The programs were written so that they ...

Development of a Program Manager/User Communication Evaluation Tool.

DTIC Science & Technology

1987-09-01

Multinovich and Vlahovich , 1984; Packard and others, 1986; Smith, 1982; Wynn, 1981) but the program manager is left to his own means to evaluate communications...transferred to the user (Multinovich and Vlahovich , 1984:8). Translating the identified need into an engineering concept, choosing the prime developer...Kelly, 1984; Multinovich and Vlahovich , 1984; Smith, 1982; Wynn, 1981). Professionals in the field of communications have done extensive work to

Space shuttle solid rocket booster recovery system definition. Volume 3: SRB water impact loads computer program, user's manual

NASA Technical Reports Server (NTRS)

1973-01-01

This user's manual describes the FORTRAN IV computer program developed to compute the total vertical load, normal concentrated pressure loads, and the center of pressure of typical SRB water impact slapdown pressure distributions specified in the baseline configuration. The program prepares the concentrated pressure load information in punched card format suitable for input to the STAGS computer program. In addition, the program prepares for STAGS input the inertia reacting loads to the slapdown pressure distributions.

Viscous wing theory development. Volume 2: GRUMWING computer program user's manual

NASA Technical Reports Server (NTRS)

Chow, R. R.; Ogilvie, P. L.

1986-01-01

This report is a user's manual which describes the operation of the computer program, GRUMWING. The program computes the viscous transonic flow over three-dimensional wings using a boundary layer type viscid-inviscid interaction approach. The inviscid solution is obtained by an approximate factorization (AFZ)method for the full potential equation. The boundary layer solution is based on integral entrainment methods.

ATR NSUF Instrumentation Enhancement Efforts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joy L. Rempe; Mitchell K. Meyer; Darrell L. Knudson

A key component of the Advanced Test Reactor (ATR) National Scientific User Facility (NSUF) effort is to expand instrumentation available to users conducting irradiation tests in this unique facility. In particular, development of sensors capable of providing real-time measurements of key irradiation parameters is emphasized because of their potential to increase data fidelity and reduce posttest examination costs. This paper describes the strategy for identifying new instrumentation needed for ATR irradiations and the program underway to develop and evaluate new sensors to address these needs. Accomplishments from this program are illustrated by describing new sensors now available to users ofmore » the ATR NSUF. In addition, progress is reported on current research efforts to provide improved in-pile instrumentation to users.« less

User modeling for distributed virtual environment intelligent agents

NASA Astrophysics Data System (ADS)

Banks, Sheila B.; Stytz, Martin R.

1999-07-01

This paper emphasizes the requirement for user modeling by presenting the necessary information to motivate the need for and use of user modeling for intelligent agent development. The paper will present information on our current intelligent agent development program, the Symbiotic Information Reasoning and Decision Support (SIRDS) project. We then discuss the areas of intelligent agents and user modeling, which form the foundation of the SIRDS project. Included in the discussion of user modeling are its major components, which are cognitive modeling and behavioral modeling. We next motivate the need for and user of a methodology to develop user models to encompass work within cognitive task analysis. We close the paper by drawing conclusions from our current intelligent agent research project and discuss avenues of future research in the utilization of user modeling for the development of intelligent agents for virtual environments.

Phase 2 STS new user development program. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Mcdowell, J. R.

1976-01-01

A methodology for developing new users for STS other than NASA and DoD, thereby maximizing the use of the STS system was developed. The approach to user development, reflected in the implementation plan, and attendant informational material to be used were evaluated by conducting a series of test cases with selected user organizations. These test case organizations were, in effect, used as consultants to evaluate the effectiveness, the needs, the completeness, and the adequacy of the user development approach and informational material. The selection of the test cases provided a variety of potential STS users covering industry, other government agencies, and the educational sector. The test cases covered various use areas and provided a mix of user organization types. A summary of the actual test cases conducted is given. The conduct of the test cases verified the general approach of the implementation plan, the validity of the user development strategy prepared for each test case organization and the effectiveness of the STS basic and user customized informational material.

Waste treatability guidance program. User`s guide. Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toth, C.

1995-12-21

DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatabilitymore » groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User`s Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan.« less

Fatigue strength reduction model: RANDOM3 and RANDOM4 user manual. Appendix 2: Development of advanced methodologies for probabilistic constitutive relationships of material strength models

NASA Technical Reports Server (NTRS)

Boyce, Lola; Lovelace, Thomas B.

1989-01-01

FORTRAN programs RANDOM3 and RANDOM4 are documented in the form of a user's manual. Both programs are based on fatigue strength reduction, using a probabilistic constitutive model. The programs predict the random lifetime of an engine component to reach a given fatigue strength. The theoretical backgrounds, input data instructions, and sample problems illustrating the use of the programs are included.

NETS

NASA Technical Reports Server (NTRS)

Baffes, Paul T.

1993-01-01

NETS development tool provides environment for simulation and development of neural networks - computer programs that "learn" from experience. Written in ANSI standard C, program allows user to generate C code for implementation of neural network.

Integrating computer programs for engineering analysis and design

NASA Technical Reports Server (NTRS)

Wilhite, A. W.; Crisp, V. K.; Johnson, S. C.

1983-01-01

The design of a third-generation system for integrating computer programs for engineering and design has been developed for the Aerospace Vehicle Interactive Design (AVID) system. This system consists of an engineering data management system, program interface software, a user interface, and a geometry system. A relational information system (ARIS) was developed specifically for the computer-aided engineering system. It is used for a repository of design data that are communicated between analysis programs, for a dictionary that describes these design data, for a directory that describes the analysis programs, and for other system functions. A method is described for interfacing independent analysis programs into a loosely-coupled design system. This method emphasizes an interactive extension of analysis techniques and manipulation of design data. Also, integrity mechanisms exist to maintain database correctness for multidisciplinary design tasks by an individual or a team of specialists. Finally, a prototype user interface program has been developed to aid in system utilization.

A user's guide for the signal processing software for image and speech compression developed in the Communications and Signal Processing Laboratory (CSPL), version 1

NASA Technical Reports Server (NTRS)

Kumar, P.; Lin, F. Y.; Vaishampayan, V.; Farvardin, N.

1986-01-01

A complete documentation of the software developed in the Communication and Signal Processing Laboratory (CSPL) during the period of July 1985 to March 1986 is provided. Utility programs and subroutines that were developed for a user-friendly image and speech processing environment are described. Additional programs for data compression of image and speech type signals are included. Also, programs for the zero-memory and block transform quantization in the presence of channel noise are described. Finally, several routines for simulating the perfromance of image compression algorithms are included.

Multimedia

NASA Technical Reports Server (NTRS)

Kaye, Karen

1993-01-01

Multimedia initiative objectives for the NASA Scientific and Technical Information (STI) program are described. A multimedia classification scheme was developed and the types of non-print media currently in use are inventoried. The NASA STI Program multimedia initiative is driven by a changing user population and technical requirements in the areas of publications, dissemination, and user and management support.

Model Adoption Exchange Payment System: Technical Specifications and User Instructions.

ERIC Educational Resources Information Center

Ambrosino, Robert J.

This user's manual, designed to meet the needs of adoption exchange administrators and program managers for a formal tool to assist them in the overall management and operation of their program, presents the Model Adoption Exchange Payment System (MAEPS), which was developed to improve the delivery of adoption exchange services throughout the…

US Coast Guard GPS Information Center (GPSIC) and its function within the Civil GPS Service (CGS)

NASA Technical Reports Server (NTRS)

1993-01-01

In 1987, the U.S. Department of Defense (DOD) formally requested that the U.S. Department of Transportation (DOT) take responsibility for providing an office that would respond to nonmilitary user needs for GPS information, data, and assistance. DOT accepted this responsibility and in February 1989, named the Coast Guard as their lead agency for the project. Since that time, the U.S. Coast Guard has worked with the U.S. Space Command to develop requirements and implement a plan for providing the requested interface with the civil GPS community. The Civil GPS Service (CGS) consists of four main elements: GPS Information Center (GPSIC) - provides GPS status information to civilian users of the system: Civil GPS Service Interface Committee (CGSIC) - established to identify civil GPS user technical information needs in support of the CGS program; Differential GPS (DGPS) - Coast Guard Research and Development Project; and PPS Program Office (PPSPO) - (Under development) will administer the program allowing qualified civil users to have access to the PPS signal. Details about the services these organizations provide are described.

Proceedings of the Workshop on Government Oil Spill Modeling

NASA Technical Reports Server (NTRS)

Bishop, J. M. (Compiler)

1980-01-01

Oil spill model users and modelers were brought together for the purpose of fostering joint communication and increasing understanding of mutual problems. The workshop concentrated on defining user needs, presentations on ongoing modeling programs, and discussions of supporting research for these modeling efforts. Specific user recommendations include the development of an oil spill model user library which identifies and describes available models. The development of models for the long-term fate and effect of spilled oil was examined.

Generation of development environments for the Arden Syntax.

PubMed Central

Bång, M.; Eriksson, H.

1997-01-01

Providing appropriate development environments for specialized languages requires a significant development and maintenance effort. Specialized environments are therefore expensive when compared to their general-language counterparts. The Arden Syntax for Medical Logic Modules (MLM) is a standardized language for representing medical knowledge. We have used PROTEGE-II, a knowledge-engineering environment, to generate a number of experimental development environments for the Arden Syntax. MEDAILLE is the resulting MLM editor, which provides a user-friendly environment that allows users to create and modify MLM definitions. Although MEDAILLE is a generated editor, it has similar functionality, while reducing the programming effort, as compared to other MLM editors developed using traditional programming techniques. We discuss how developers can use PROTEGE-II to generate development environments for other standardized languages and for general programming languages. PMID:9357639

CyberMedVPS: visual programming for development of simulators.

PubMed

Morais, Aline M; Machado, Liliane S

2011-01-01

Computer applications based on Virtual Reality (VR) has been outstanding in training and teaching in the medical filed due to their ability to simulate realistic in which users can practice skills and decision making in different situations. But was realized in these frameworks a hard interaction of non-programmers users. Based on this problematic will be shown the CyberMedVPS, a graphical module which implement Visual Programming concepts to solve an interaction trouble. Frameworks to develop such simulators are available but their use demands knowledge of programming. Based on this problematic will be shown the CyberMedVPS, a graphical module for the CyberMed framework, which implements Visual Programming concepts to allow the development of simulators by non-programmers professionals of the medical field.

A Participatory Design Approach to Develop a Web-Based Self-Care Program Supporting Early Rehabilitation among Patients after Total Laryngectomy.

PubMed

Cnossen, Ingrid C; van Uden-Kraan, Cornelia F; Eerenstein, Simone E J; Rinkel, Rico N P M; Aalders, Ijke J; van den Berg, Klaske; de Goede, Cees J T; van Stijgeren, Ans J; Cruijff-Bijl, Yvonne; de Bree, Remco; Leemans, C René; Verdonck-de Leeuw, Irma M

2015-01-01

To develop a Web-based self-care program for patients after total laryngectomy according to a participatory design approach. We conducted a needs assessment with laryngectomees (n = 9) and their partners (n = 3) by means of a focus group interview. In 4 focus group sessions, a requirement plan was formulated by a team of health care professionals (n = 10) and translated into a prototype. An e-health application was built including illustrated information on functional changes after total laryngectomy as well as video demonstrations of skills and exercises. Usability of the prototype was tested by end users (n = 4) and expert users (n = 10). Interviews were held to elicit the intention to use and the desired implementation strategy. Six main self-care topics were identified: (1) nutrition, (2) tracheostomy care, (3) voice prosthesis care, (4) speech rehabilitation, (5) smell rehabilitation, and (6) mobility of head, neck, and shoulder muscles. Expert users expressed concerns regarding tailored exercises, indicated a positive intent to implement the intervention in routine care, and expressed a need for guidance when implementing the intervention. End users and expert users appreciated the content completeness and multimedia-based information built into the application. The participatory design is a valuable approach to develop a self-care program to help meet users' needs. © 2016 S. Karger AG, Basel.

Space Communication Artificial Intelligence for Link Evaluation Terminal (SCAILET)

NASA Technical Reports Server (NTRS)

Shahidi, Anoosh K.; Schlegelmilch, Richard F.; Petrik, Edward J.; Walters, Jerry L.

1992-01-01

A software application to assist end-users of the high burst rate (HBR) link evaluation terminal (LET) for satellite communications is being developed. The HBR LET system developed at NASA Lewis Research Center is an element of the Advanced Communications Technology Satellite (ACTS) Project. The HBR LET is divided into seven major subsystems, each with its own expert. Programming scripts, test procedures defined by design engineers, set up the HBR LET system. These programming scripts are cryptic, hard to maintain and require a steep learning curve. These scripts were developed by the system engineers who will not be available for the end-users of the system. To increase end-user productivity a friendly interface needs to be added to the system. One possible solution is to provide the user with adequate documentation to perform the needed tasks. With the complexity of this system the vast amount of documentation needed would be overwhelming and the information would be hard to retrieve. With limited resources, maintenance is another reason for not using this form of documentation. An advanced form of interaction is being explored using current computer techniques. This application, which incorporates a combination of multimedia and artificial intelligence (AI) techniques to provided end-users with an intelligent interface to the HBR LET system, is comprised of an intelligent assistant, intelligent tutoring, and hypermedia documentation. The intelligent assistant and tutoring systems address the critical programming needs of the end-user.

A user interface development tool for space science systems Transportable Applications Environment (TAE) Plus

NASA Technical Reports Server (NTRS)

Szczur, Martha R.

1990-01-01

The Transportable Applications Environment Plus (TAE PLUS), developed at NASA's Goddard Space Flight Center, is a portable What You See Is What You Get (WYSIWYG) user interface development and management system. Its primary objective is to provide an integrated software environment that allows interactive prototyping and development that of user interfaces, as well as management of the user interface within the operational domain. Although TAE Plus is applicable to many types of applications, its focus is supporting user interfaces for space applications. This paper discusses what TAE Plus provides and how the implementation has utilized state-of-the-art technologies within graphic workstations, windowing systems and object-oriented programming languages.

Advanced program development management software system. Software description and user's manual

NASA Technical Reports Server (NTRS)

1990-01-01

The objectives of this project were to apply emerging techniques and tools from the computer science discipline of paperless management to the activities of the Space Transportation and Exploration Office (PT01) in Marshall Space Flight Center (MSFC) Program Development, thereby enhancing the productivity of the workforce, the quality of the data products, and the collection, dissemination, and storage of information. The approach used to accomplish the objectives emphasized the utilization of finished form (off-the-shelf) software products to the greatest extent possible without impacting the performance of the end product, to pursue developments when necessary in the rapid prototyping environment to provide a mechanism for frequent feedback from the users, and to provide a full range of user support functions during the development process to promote testing of the software.

TADS: A CFD-based turbomachinery and analysis design system with GUI. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Myers, R. A.; Topp, D. A.; Delaney, R. A.

1995-01-01

The primary objective of this study was the development of a computational fluid dynamics (CFD) based turbomachinery airfoil analysis and design system, controlled by a graphical user interface (GUI). The computer codes resulting from this effort are referred to as the Turbomachinery Analysis and Design System (TADS). This document is intended to serve as a user's manual for the computer programs which comprise the TADS system. TADS couples a throughflow solver (ADPAC) with a quasi-3D blade-to-blade solver (RVCQ3D) in an interactive package. Throughflow analysis capability was developed in ADPAC through the addition of blade force and blockage terms to the governing equations. A GUI was developed to simplify user input and automate the many tasks required to perform turbomachinery analysis and design. The coupling of various programs was done in a way that alternative solvers or grid generators could be easily incorporated into the TADS framework.

User's operating procedures. Volume 2: Scout project financial analysis program

NASA Technical Reports Server (NTRS)

Harris, C. G.; Haris, D. K.

1985-01-01

A review is presented of the user's operating procedures for the Scout Project Automatic Data system, called SPADS. SPADS is the result of the past seven years of software development on a Prime mini-computer located at the Scout Project Office, NASA Langley Research Center, Hampton, Virginia. SPADS was developed as a single entry, multiple cross-reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. This volume, two (2) of three (3), provides the instructions to operate the Scout Project Financial Analysis program in data retrieval and file maintenance via the user friendly menu drivers.

The Graphical User Interface: Crisis, Danger, and Opportunity.

ERIC Educational Resources Information Center

Boyd, L. H.; And Others

1990-01-01

This article describes differences between the graphical user interface and traditional character-based interface systems, identifies potential problems posed by graphic computing environments for blind computer users, and describes some programs and strategies that are being developed to provide access to those environments. (Author/JDD)

Identification and evaluation of educational uses and users for the STS. Educational planning for utilization of space shuttle ED-PLUSS

NASA Technical Reports Server (NTRS)

Engle, H. A.; Christensen, D. L.

1974-01-01

A planning and feasibility study to identify and document a methodology needed to incorporate educational programs into future missions and operations of the space transportation system was conducted. Six tasks were identified and accomplished during the study. The task statements are as follows: (1) potential user identification, (2) a review of space education programs, (3) development of methodology for user involvement, (4) methods to encourage user awareness, (5) compilation of follow-on ideas, and (6) response to NASA questions. Specific recommendations for improving the educational coverage of space activities are provided.

VEEP - Vehicle Economy, Emissions, and Performance program

NASA Technical Reports Server (NTRS)

Heimburger, D. A.; Metcalfe, M. A.

1977-01-01

VEEP is a general-purpose discrete event simulation program being developed to study the performance, fuel economy, and exhaust emissions of a vehicle modeled as a collection of its separate components. It is written in SIMSCRIPT II.5. The purpose of this paper is to present the design methodology, describe the simulation model and its components, and summarize the preliminary results. Topics include chief programmer team concepts, the SDDL design language, program portability, user-oriented design, the program's user command syntax, the simulation procedure, and model validation.

Systematic Propulsion Optimization Tools (SPOT)

NASA Technical Reports Server (NTRS)

Bower, Mark; Celestian, John

1992-01-01

This paper describes a computer program written by senior-level Mechanical Engineering students at the University of Alabama in Huntsville which is capable of optimizing user-defined delivery systems for carrying payloads into orbit. The custom propulsion system is designed by the user through the input of configuration, payload, and orbital parameters. The primary advantages of the software, called Systematic Propulsion Optimization Tools (SPOT), are a user-friendly interface and a modular FORTRAN 77 code designed for ease of modification. The optimization of variables in an orbital delivery system is of critical concern in the propulsion environment. The mass of the overall system must be minimized within the maximum stress, force, and pressure constraints. SPOT utilizes the Design Optimization Tools (DOT) program for the optimization techniques. The SPOT program is divided into a main program and five modules: aerodynamic losses, orbital parameters, liquid engines, solid engines, and nozzles. The program is designed to be upgraded easily and expanded to meet specific user needs. A user's manual and a programmer's manual are currently being developed to facilitate implementation and modification.

User Access | Energy Systems Integration Facility | NREL

Science.gov Websites

User Access User Access The ESIF houses an unparalleled collection of state-of-the-art capabilities user access program, the ESIF allows researchers access to its premier laboratories in support of research and development that aims to optimize our entire energy system at full power. Requests for access

Development of a wheelchair maintenance training programme and questionnaire for clinicians and wheelchair users.

PubMed

Toro, Maria Luisa; Bird, Emily; Oyster, Michelle; Worobey, Lynn; Lain, Michael; Bucior, Samuel; Cooper, Rory A; Pearlman, Jonathan

2017-11-01

Purpose of state: The aims of this study were to develop a Wheelchair Maintenance Training Programme (WMTP) as a tool for clinicians to teach wheelchair users (and caregivers when applicable) in a group setting to perform basic maintenance at home in the USA and to develop a Wheelchair Maintenance Training Questionnaire (WMT-Q) to evaluate wheelchair maintenance knowledge in clinicians, manual and power wheelchair users. The WMTP and WMT-Q were developed through an iterative process. A convenience sample of clinicians (n = 17), manual wheelchair (n ∞ 5), power wheelchair users (n = 4) and caregivers (n = 4) provided feedback on the training programme. A convenience sample of clinicians (n = 38), manual wheelchair (n = 25), and power wheelchair users (n = 30) answered the WMT-Q throughout different phases of development. The subscores of the WMT-Q achieved a reliability that ranged between ICC(3,1) = 0.48 to ICC(3,1) = 0.89. The WMTP and WMT-Q were implemented with 15 clinicians who received in-person training in the USA using the materials developed and showed a significant increase in all except one of the WMT-Q subscores after the WMTP (p < 0.007). The WMTP will continue to be revised as it is further implemented. The WMT-Q is an acceptable instrument to measure pre- and post-training maintenance knowledge. Implications for Rehabilitation The Wheelchair Maintenance Training Program can be used to educate rehabilitation clinicians and technicians to improve wheelchair service and delivery to end users. This training complements the World Health Organization basic wheelchair service curriculum, which only includes training of the clinicians, but does not include detailed information to train wheelchair users and caregivers. This training program offers a time efficient method for providing education to end users in a group setting that may mitigate adverse consequences resulting from wheelchair breakdown. This training program has significant potential for impact among wheelchair users in areas where access to repair services is limited.

Computer Program and User Documentation Medical Data Input System

NASA Technical Reports Server (NTRS)

Anderson, J.

1971-01-01

Several levels of documentation are presented for the program module of the NASA medical directorate minicomputer storage and retrieval system. The biomedical information system overview gives reasons for the development of the minicomputer storage and retrieval system. It briefly describes all of the program modules which constitute the system. A technical discussion oriented to the programmer is given. Each subroutine is described in enough detail to permit in-depth understanding of the routines and to facilitate program modifications. The program utilization section may be used as a users guide.

Space station needs, attributes and architectural options study. Briefing material, mid-term review

NASA Technical Reports Server (NTRS)

1982-01-01

User mission requirements and their relationship to the current space transportation system are examined as a means of assuring the infusion of corporate ideas and knowledge in the space station program. Specific tasks include developing strategies to develop user consistency; determine DOD implication and requirements; and foster industry involvement in the space station. Mission alternatives; accrued benefits; program options; system attributes and characteristics; and a recommended plan for space station evolution are covered.

Development of a graphical user interface for the global land information system (GLIS)

USGS Publications Warehouse

Alstad, Susan R.; Jackson, David A.

1993-01-01

The process of developing a Motif Graphical User Interface for the Global Land Information System (GLIS) involved incorporating user requirements, in-house visual and functional design requirements, and Open Software Foundation (OSF) Motif style guide standards. Motif user interface windows have been developed using the software to support Motif window functions war written using the C programming language. The GLIS architecture was modified to support multiple servers and remote handlers running the X Window System by forming a network of servers and handlers connected by TCP/IP communications. In April 1993, prior to release the GLIS graphical user interface and system architecture modifications were test by developers and users located at the EROS Data Center and 11 beta test sites across the country.

CLIPS application user interface for the PC

NASA Technical Reports Server (NTRS)

Jenkins, Jim; Holbrook, Rebecca; Shewhart, Mark; Crouse, Joey; Yarost, Stuart

1991-01-01

The majority of applications that utilize expert system development programs for their knowledge representation and inferencing capability require some form of interface with the end user. This interface is more than likely an interaction through the computer screen. When building an application the user interface can prove to be the most difficult and time consuming aspect to program. Commercial products currently exist which address this issue. To keep pace C Language Integrated Production System (CLIPS) will need to find a solution for their lack of an easy to use Application User Interface (AUI). This paper represents a survey of the DoD CLIPS' user community and provides the backbone of a possible solution.

Tools of the Courseware Trade: A Comparison of ToolBook 1.0 and HyperCard 2.0.

ERIC Educational Resources Information Center

Brader, Lorinda L.

1990-01-01

Compares two authoring tools that were developed to enable users without programing experience to create and modify software. HyperCard, designed for Macintosh microcomputers, and ToolBook, for microcomputers that run on MS-DOS, are compared in the areas of programing languages, graphics and printing capabilities, user interface, system…

ALOG user's manual: A Guide to using the spreadsheet-based artificial log generator

Treesearch

Matthew F. Winn; Philip A. Araman; Randolph H. Wynne

2012-01-01

Computer programs that simulate log sawing can be valuable training tools for sawyers, as well as a means oftesting different sawing patterns. Most available simulation programs rely on diagrammed-log databases, which canbe very costly and time consuming to develop. Artificial Log Generator (ALOG) is a user-friendly Microsoft® Excel®...

User-Adaptable Microcomputer Graphics Software for Life Science Instruction. Final Project Report.

ERIC Educational Resources Information Center

Spain, James D.

The objectives of the SUMIT project was to develop, evaluate, and disseminate 20 course modules (microcomputer programs) for instruction in general biology and ecology. To encourage broad utilization, the programs were designed for the Apple II microcomputer and written in Applesoft Basic with a user-adaptable format. Each package focused on a key…

OPTIMAL WELL LOCATOR (OWL): A SCREENING TOOL FOR EVALUATING LOCATIONS OF MONITORING WELLS: USER'S GUIDE VERSION 1.2

EPA Science Inventory

The Optimal Well Locator ( OWL) program was designed and developed by USEPA to be a screening tool to evaluate and optimize the placement of wells in long term monitoring networks at small sites. The first objective of the OWL program is to allow the user to visualize the change ...

Stan: A Probabilistic Programming Language for Bayesian Inference and Optimization

ERIC Educational Resources Information Center

Gelman, Andrew; Lee, Daniel; Guo, Jiqiang

2015-01-01

Stan is a free and open-source C++ program that performs Bayesian inference or optimization for arbitrary user-specified models and can be called from the command line, R, Python, Matlab, or Julia and has great promise for fitting large and complex statistical models in many areas of application. We discuss Stan from users' and developers'…

Research flight software engineering and MUST, an integrated system of support tools

NASA Technical Reports Server (NTRS)

Straeter, T. A.; Foudriat, E. C.; Will, R. W.

1977-01-01

Consideration is given to software development to support NASA flight research. The Multipurpose User-Oriented Software Technology (MUST) program, designed to integrate digital systems into flight research, is discussed. Particular attention is given to the program's special interactive user interface, subroutine library, assemblers, compiler, automatic documentation tools, and test and simulation subsystems.

An Attempt To Develop An "Intelligent" Lens Design Program

NASA Astrophysics Data System (ADS)

Viswanathan, V. K.; Bohachevsky, I. O.; Cotter, T. P.

1986-02-01

We are developing a lens design program intended to operate without user intervention, and to improve its performance with repeated usage. The methodology and current status will be discussed in this paper.

Users' manual for computer program for three-dimensional analysis of coupler-cavity traveling wave tubes

NASA Technical Reports Server (NTRS)

Omalley, T. A.

1984-01-01

The use of the coupled cavity traveling wave tube for space communications has led to an increased interest in improving the efficiency of the basic interaction process in these devices through velocity resynchronization and other methods. A flexible, three dimensional, axially symmetric, large signal computer program was developed for use on the IBM 370 time sharing system. A users' manual for this program is included.

VASCOMP 2. The V/STOL aircraft sizing and performance computer program. Volume 6: User's manual, revision 3

NASA Technical Reports Server (NTRS)

Schoen, A. H.; Rosenstein, H.; Stanzione, K.; Wisniewski, J. S.

1980-01-01

This report describes the use of the V/STOL Aircraft Sizing and Performance Computer Program (VASCOMP II). The program is useful in performing aircraft parametric studies in a quick and cost efficient manner. Problem formulation and data development were performed by the Boeing Vertol Company and reflects the present preliminary design technology. The computer program, written in FORTRAN IV, has a broad range of input parameters, to enable investigation of a wide variety of aircraft. User oriented features of the program include minimized input requirements, diagnostic capabilities, and various options for program flexibility.

A Simplified Shuttle Payload Thermal Analyzer /SSPTA/ program

NASA Technical Reports Server (NTRS)

Bartoszek, J. T.; Huckins, B.; Coyle, M.

1979-01-01

A simple thermal analysis program for Space Shuttle payloads has been developed to accommodate the user who requires an easily understood but dependable analytical tool. The thermal analysis program includes several thermal subprograms traditionally employed in spacecraft thermal studies, a data management system for data generated by the subprograms, and a master program to coordinate the data files and thermal subprograms. The language and logic used to run the thermal analysis program are designed for the small user. In addition, analytical and storage techniques which conserve computer time and minimize core requirements are incorporated into the program.

An interactive program for pharmacokinetic modeling.

PubMed

Lu, D R; Mao, F

1993-05-01

A computer program, PharmK, was developed for pharmacokinetic modeling of experimental data. The program was written in C computer language based on the high-level user-interface Macintosh operating system. The intention was to provide a user-friendly tool for users of Macintosh computers. An interactive algorithm based on the exponential stripping method is used for the initial parameter estimation. Nonlinear pharmacokinetic model fitting is based on the maximum likelihood estimation method and is performed by the Levenberg-Marquardt method based on chi 2 criterion. Several methods are available to aid the evaluation of the fitting results. Pharmacokinetic data sets have been examined with the PharmK program, and the results are comparable with those obtained with other programs that are currently available for IBM PC-compatible and other types of computers.

A service user co-facilitated intervention to reduce mental illness stigma among primary healthcare workers: Utilizing perspectives of family members and caregivers.

PubMed

Rai, Sauharda; Gurung, Dristy; Kaiser, Bonnie N; Sikkema, Kathleen J; Dhakal, Manoj; Bhardwaj, Anvita; Tergesen, Cori; Kohrt, Brandon A

2018-06-01

Service users' involvement as cofacilitators of mental health trainings is a nascent endeavor in low- and middle-income countries, and the role of families on service user participation in trainings has received limited attention. This study examined how caregivers perceive and facilitate service user's involvement in an antistigma program that was added to mental health Gap Action Program (mhGAP) trainings for primary care workers in Nepal. Service users were trained as cofacilitators for antistigma and mhGAP trainings delivered to primary care workers through the REducing Stigma among HealthcAre ProvidErs (RESHAPE) program. Key informant interviews (n = 17) were conducted with caregivers and service users in RESHAPE. Five themes emerged: (a) Caregivers' perceived benefits of service user involvement included reduced caregiver burden, learning new skills, and opportunities to develop support groups. (b) Caregivers' fear of worsening stigma impeded RESHAPE participation. (c) Lack of trust between caregivers and service users jeopardized participation, but it could be mitigated through family engagement with health workers. (d) Orientation provided to caregivers regarding RESHAPE needed greater attention, and when information was provided, it contributed to stigma reduction in families. (e) Time management impacted caregivers' ability to facilitate service user participation. Engagement with families allows for greater identification of motivational factors and barriers impacting optimal program performance. Caregiver involvement in all program elements should be considered best practice for service user-facilitated antistigma initiatives, and service users reluctant to include caregivers should be provided with health staff support to address barriers to including family. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Windows to the Universe: Earth Science Enterprise Education Program

NASA Technical Reports Server (NTRS)

2004-01-01

Over the past year, Windows to the Universe has continued a multifaceted program of support to the Earth Science Enterprise Education program. Areas of activity include continued maintenance of the W2U website and user traffic analysis, development of new and revised content and activities on the website, implementation of new tools to facilitate website development and maintenance, response to users questions and comments, professional development for educators through workshops at the National Science Teachers Association meetings and at NCAR, and dissemination of information about the project through materials distribution at NSTAs, AGUs, AMS and other venues. This report provides some background on the project and summarizes progress for the third and final year of the project.

Technology transfer program: Perspective

NASA Technical Reports Server (NTRS)

Toyshov, A. J.

1981-01-01

Most of NASA's technology transfer activities are in the area of land use (development, suitability, and planning); forestry (including wildlife and range and vegetation inventories) agriculture related activities; and water resources. The technology dissemination function is exercised through three regional applications centers which are involved in 91 applications projects within 22 states. In addition there are approximately eight application system verification transfer (ASVT) projects, 21 university applications branches, institutionalized liason activities with public interest groups, and user requirements activities. As the result of budget cuts, the ASVT and user requirements and awareness programs are to be phased out at the end of FY81. The university applications programs are to be phased down and terminated by 1985. NASA will continue to work with the user more in an R & D and an applications development capacity, and not in a national scale or administrative way.

A Ballistic Limit Analysis Program for Shielding Against Micrometeoroids and Orbital Debris

NASA Technical Reports Server (NTRS)

Ryan, Shannon; Christiansen, Erie

2010-01-01

A software program has been developed that enables the user to quickly and simply perform ballistic limit calculations for common spacecraft structures that are subject to hypervelocity impact of micrometeoroid and orbital debris (MMOD) projectiles. This analysis program consists of two core modules: design, and; performance. The design module enables a user to calculate preliminary dimensions of a shield configuration (e.g., thicknesses/areal densities, spacing, etc.) for a ?design? particle (diameter, density, impact velocity, incidence). The performance module enables a more detailed shielding analysis, providing the performance of a user-defined shielding configuration over the range of relevant in-orbit impact conditions.

TEST (Toxicity Estimation Software Tool) Ver 4.1

EPA Science Inventory

The Toxicity Estimation Software Tool (T.E.S.T.) has been developed to allow users to easily estimate toxicity and physical properties using a variety of QSAR methodologies. T.E.S.T allows a user to estimate toxicity without requiring any external programs. Users can input a chem...

AOIPS 3 User's guide. Volume 1: Overview and software utilization

NASA Technical Reports Server (NTRS)

Schotz, S. S.; Negri, A. J.; Robinson, W.

1989-01-01

This is Volume I of the Atmospheric and Oceanographic Information Processing System (AOIPS) User's Guide. AOIPS 3 is the version of the AOIPS software as of April 1989. The AOIPS software was developed jointly by the Goddard Space Flight Center and General Sciences Corporation. Volume 1 is intended to provide the user with an overall guide to the AOIPS system. It introduces the user to AOIPS system concepts, explains how programs are related and the necessary order of program execution, and provides brief descriptions derived from on-line help for every AOIPS program. It is intended to serve as a reference for information such as: program function, inmput/output variable descriptions, program limitations, etc. AOIPS is an interactive meteorological processing system with capabilities to ingest and analyze the many types of meteorological data. AOIPS includes several applications in areas of relevance to meteorological research. AOIPS is partitioned into four applications components: satellite data analysis, radar data analysis, aircraft data analysis, and utilities.

Multi-User Hardware Solutions to Combustion Science ISS Research

NASA Technical Reports Server (NTRS)

Otero, Angel M.

2001-01-01

In response to the budget environment and to expand on the International Space Station (ISS) Fluids and Combustion Facility (FCF) Combustion Integrated Rack (CIR), common hardware approach, the NASA Combustion Science Program shifted focus in 1999 from single investigator PI (Principal Investigator)-specific hardware to multi-user 'Minifacilities'. These mini-facilities would take the CIR common hardware philosophy to the next level. The approach that was developed re-arranged all the investigations in the program into sub-fields of research. Then common requirements within these subfields were used to develop a common system that would then be complemented by a few PI-specific components. The sub-fields of research selected were droplet combustion, solids and fire safety, and gaseous fuels. From these research areas three mini-facilities have sprung: the Multi-user Droplet Combustion Apparatus (MDCA) for droplet research, Flow Enclosure for Novel Investigations in Combustion of Solids (FEANICS) for solids and fire safety, and the Multi-user Gaseous Fuels Apparatus (MGFA) for gaseous fuels. These mini-facilities will develop common Chamber Insert Assemblies (CIA) and diagnostics for the respective investigators complementing the capability provided by CIR. Presently there are four investigators for MDCA, six for FEANICS, and four for MGFA. The goal of these multi-user facilities is to drive the cost per PI down after the initial development investment is made. Each of these mini-facilities will become a fixture of future Combustion Science NASA Research Announcements (NRAs), enabling investigators to propose against an existing capability. Additionally, an investigation is provided the opportunity to enhance the existing capability to bridge the gap between the capability and their specific science requirements. This multi-user development approach will enable the Combustion Science Program to drive cost per investigation down while drastically reducing the time required to go from selection to space flight.

Proceedings of the Conference on Research for the Development of Geothermal Energy Resources

NASA Technical Reports Server (NTRS)

1974-01-01

The proceedings of a conference on the development of geothermal energy resources are presented. The purpose of the conference was to acquaint potential user groups with the Federal and National Science Foundation geothermal programs and the method by which the users and other interested members can participate in the program. Among the subjects discussed are: (1) resources exploration and assessment, (2) environmental, legal, and institutional research, (3) resource utilization projects, and (4) advanced research and technology.

Design choices made by target users for a pay-for-performance program in primary care: an action research approach.

PubMed

Kirschner, Kirsten; Braspenning, Jozé; Jacobs, J E Annelies; Grol, Richard

2012-03-27

International interest in pay-for-performance (P4P) initiatives to improve quality of health care is growing. Current programs vary in the methods of performance measurement, appraisal and reimbursement. One may assume that involvement of health care professionals in the goal setting and methods of quality measurement and subsequent payment schemes may enhance their commitment to and motivation for P4P programs and therefore the impact of these programs. We developed a P4P program in which the target users were involved in decisions about the P4P methods. For the development of the P4P program a framework was used which distinguished three main components: performance measurement, appraisal and reimbursement. Based on this framework design choices were discussed in two panels of target users using an adapted Delphi procedure. The target users were 65 general practices and two health insurance companies in the South of the Netherlands. Performance measurement was linked to the Dutch accreditation program based on three domains (clinical care, practice management and patient experience). The general practice was chosen as unit of assessment. Relative standards were set at the 25th percentile of group performance. The incentive for clinical care was set twice as high as the one for practice management and patient experience. Quality scores were to be calculated separately for all three domains, and for both the quality level and the improvement of performance. The incentive for quality level was set thrice as high as the one for the improvement of performance. For reimbursement, quality scores were divided into seven levels. A practice with a quality score in the lowest group was not supposed to receive a bonus. The additional payment grew proportionally for each extra group. The bonus aimed at was on average 5% to 10% of the practice income. Designing a P4P program for primary care with involvement of the target users gave us an insight into their motives, which can help others who need to discuss similar programs. The resulting program is in line with target users' views and assessments of relevance and applicability. This may enhance their commitment to the program as was indicated by the growing number of voluntary participants after a successfully performed field test during the procedure. The elements of our framework can be very helpful for others who are developing or evaluating a P4P program.

Fluid dynamics computer programs for NERVA turbopump

NASA Technical Reports Server (NTRS)

Brunner, J. J.

1972-01-01

During the design of the NERVA turbopump, numerous computer programs were developed for the analyses of fluid dynamic problems within the machine. Program descriptions, example cases, users instructions, and listings for the majority of these programs are presented.

iVirtualWorld: A Domain-Oriented End-User Development Environment for Building 3D Virtual Chemistry Experiments

ERIC Educational Resources Information Center

Zhong, Ying

2013-01-01

Virtual worlds are well-suited for building virtual laboratories for educational purposes to complement hands-on physical laboratories. However, educators may face technical challenges because developing virtual worlds requires skills in programming and 3D design. Current virtual world building tools are developed for users who have programming…

Technology transfer within the NASA Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Plotkin, Henry H.

1992-01-01

Viewgraphs on technology transfer within the NASA Goddard Space Flight Center presented to Civil Space Technology Development workshop on technology transfer and effectiveness are provided. Topics covered include: obstacles to technology transfer; technology transfer improvement program at GSFC: communication between technology developers and users; and user feedback to technologists.

Development of the cancer patient financial aid system and analysis of user satisfaction.

PubMed

Park, Joon Ho; Park, Eun-Cheol; Lee, Myung Ha; Kim, Yun-Mi; Choi, Soo Mi

2006-01-01

A financial aid program for low income cancer patients in Korea was initiated in 2005, which required a web-based system. Therefore, the Cancer Patient Financial Aid System (CPFAS) was developed. To improve the CPFAS, we evaluated the nationwide satisfaction of public health center users.

Users' manual for computer program for one-dimensional analysis of coupled-cavity traveling wave tubes

NASA Technical Reports Server (NTRS)

Omalley, T. A.; Connolly, D. J.

1977-01-01

The use of the coupled cavity traveling wave tube for space communications has led to an increased interest in improving the efficiency of the basic interaction process in these devices through velocity resynchronization and other methods. To analyze these methods, a flexible, large signal computer program for use on the IBM 360/67 time-sharing system has been developed. The present report is a users' manual for this program.

A numerical simulation of the dispersal of aerial sprays

NASA Technical Reports Server (NTRS)

Bragg, M. B.

1981-01-01

A computer program was developed to predict the trajectory, ground deposition, and drift of liquid sprays injected into the wake of an agricultural aircraft in ground effect. The program uses a horseshoe vortex wake model and includes the effects of liquid droplet evaporation, crosswind, the propeller slipstream, ground effect, and tunnel walls on small scale models. This user's guide includes several case examples demonstrating user options. A complete listing of the FORTRAN program is provided.

Adapting an in-person patient-caregiver communication intervention to a tailored web-based format.

PubMed

Zulman, Donna M; Schafenacker, Ann; Barr, Kathryn L C; Moore, Ian T; Fisher, Jake; McCurdy, Kathryn; Derry, Holly A; Saunders, Edward W; An, Lawrence C; Northouse, Laurel

2012-03-01

Interventions that target cancer patients and their caregivers have been shown to improve patient-caregiver communication, support, and emotional well-being. To adapt an in-person communication intervention for cancer patients and caregivers to a web-based format, and to examine the usability and acceptability of the web-based program among representative users. A tailored, interactive web-based communication program for cancer patients and their family caregivers was developed based on an existing in-person, nurse-delivered intervention. The development process involved: (1) building a multidisciplinary team of content and web design experts, (2) combining key components of the in-person intervention with the unique tailoring and interactive features of a web-based platform, and (3) conducting focus groups and usability testing to obtain feedback from representative program users at multiple time points. Four focus groups with 2-3 patient-caregiver pairs per group (n = 22 total participants) and two iterations of usability testing with four patient-caregiver pairs per session (n = 16 total participants) were conducted. Response to the program's structure, design, and content was favorable, even among users who were older or had limited computer and Internet experience. The program received high ratings for ease of use and overall usability (mean System Usability Score of 89.5 out of 100). Many elements of a nurse-delivered patient-caregiver intervention can be successfully adapted to a web-based format. A multidisciplinary design team and an iterative evaluation process with representative users were instrumental in the development of a usable and well-received web-based program. Copyright © 2011 John Wiley & Sons, Ltd.

Brief Report: Adapting an In-Person Patient-Caregiver Communication Intervention to a Tailored Web-Based Format

PubMed Central

Zulman, Donna M.; Schafenacker, Ann; Barr, Kathryn L.C.; Moore, Ian T.; Fisher, Jake; McCurdy, Kathryn; Derry, Holly A.; Saunders, Edward W.; An, Lawrence C.; Northouse, Laurel

2011-01-01

Background Interventions that target cancer patients and their caregivers have been shown to improve communication, support, and emotional well-being. Objective To adapt an in-person communication intervention for cancer patients and caregivers to a web-based format, and to examine the usability and acceptability of the web-based program among representative users. Methods A tailored, interactive web-based communication program for cancer patients and their family caregivers was developed based on an existing in-person, nurse-delivered intervention. The development process involved: 1) building a multidisciplinary team of content and web design experts, 2) combining key components of the in-person intervention with the unique tailoring and interactive features of a web-based platform, and 3) conducting focus groups and usability testing to obtain feedback from representative program users at multiple time points. Results Four focus groups with 2 to 3 patient-caregiver pairs per group (n = 22 total participants) and two iterations of usability testing with 4 patient-caregiver pairs per session (n = 16 total participants) were conducted. Response to the program's structure, design, and content was favorable, even among users who were older or had limited computer and internet experience. The program received high ratings for ease of use and overall usability (mean System Usability Score of 89.5 out of 100). Conclusions Many elements of a nurse-delivered patient-caregiver intervention can be successfully adapted to a web-based format. A multidisciplinary design team and an iterative evaluation process with representative users were instrumental in the development of a usable and well-received web-based program. PMID:21830255

TmoleX--a graphical user interface for TURBOMOLE.

PubMed

Steffen, Claudia; Thomas, Klaus; Huniar, Uwe; Hellweg, Arnim; Rubner, Oliver; Schroer, Alexander

2010-12-01

We herein present the graphical user interface (GUI) TmoleX for the quantum chemical program package TURBOMOLE. TmoleX allows users to execute the complete workflow of a quantum chemical investigation from the initial building of a structure to the visualization of the results in a user friendly graphical front end. The purpose of TmoleX is to make TURBOMOLE easy to use and to provide a high degree of flexibility. Hence, it should be a valuable tool for most users from beginners to experts. The program is developed in Java and runs on Linux, Windows, and Mac platforms. It can be used to run calculations on local desktops as well as on remote computers. © 2010 Wiley Periodicals, Inc.

The Steward Observatory asteroid relational database

NASA Technical Reports Server (NTRS)

Sykes, Mark V.; Alvarezdelcastillo, Elizabeth M.

1992-01-01

The Steward Observatory Asteroid Relational Database (SOARD) was created as a flexible tool for undertaking studies of asteroid populations and sub-populations, to probe the biases intrinsic to asteroid databases, to ascertain the completeness of data pertaining to specific problems, to aid in the development of observational programs, and to develop pedagogical materials. To date SOARD has compiled an extensive list of data available on asteroids and made it accessible through a single menu-driven database program. Users may obtain tailored lists of asteroid properties for any subset of asteroids or output files which are suitable for plotting spectral data on individual asteroids. A browse capability allows the user to explore the contents of any data file. SOARD offers, also, an asteroid bibliography containing about 13,000 references. The program has online help as well as user and programmer documentation manuals. SOARD continues to provide data to fulfill requests by members of the astronomical community and will continue to grow as data is added to the database and new features are added to the program.

Comprehensive Occupational Data Analysis Programs 80 (CODAP80) User’s Manual.

DTIC Science & Technology

1984-01-01

8217 -____ ____ ___ - -- -- -~--- - PA"m: 84/006a 5, -(,0 i 4. TH IkdmS. lbne ISCOMlPREHENS IVE OCCUPATIONAL DATA ANALYSIS PROGRAMS 80 (CODAP80) JAUARY 1984 User s Manua 7. Auw...AD-A144 125 COMPEHIENSIVE OCCUPATIONAL DATA ANALYSIS PROGRAMS 80 ’i (CODAP8OI USES MANUAtfUD NAVY OCCUPATIONAL DEVELOPMENT AND ANALYSIS CENTER...e COMPREVENSIVE OCCUPATIONAL DATA ANALYSIS PROGRAMS 80 (CODAP80) JANUARY 1984Uer s Manual 7. Author(s) L. pt, t wis ONapetion ft.p No. N/A 9

Development of the Symbolic Manipulator Laboratory modeling package for the kinematic design and optimization of the Future Armor Rearm System robot. Ammunition Logistics Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

March-Leuba, S.; Jansen, J.F.; Kress, R.L.

1992-08-01

A new program package, Symbolic Manipulator Laboratory (SML), for the automatic generation of both kinematic and static manipulator models in symbolic form is presented. Critical design parameters may be identified and optimized using symbolic models as shown in the sample application presented for the Future Armor Rearm System (FARS) arm. The computer-aided development of the symbolic models yields equations with reduced numerical complexity. Important considerations have been placed on the closed form solutions simplification and on the user friendly operation. The main emphasis of this research is the development of a methodology which is implemented in a computer program capablemore » of generating symbolic kinematic and static forces models of manipulators. The fact that the models are obtained trigonometrically reduced is among the most significant results of this work and the most difficult to implement. Mathematica, a commercial program that allows symbolic manipulation, is used to implement the program package. SML is written such that the user can change any of the subroutines or create new ones easily. To assist the user, an on-line help has been written to make of SML a user friendly package. Some sample applications are presented. The design and optimization of the 5-degrees-of-freedom (DOF) FARS manipulator using SML is discussed. Finally, the kinematic and static models of two different 7-DOF manipulators are calculated symbolically.« less

A thermal vacuum test optimization procedure

NASA Technical Reports Server (NTRS)

Kruger, R.; Norris, H. P.

1979-01-01

An analytical model was developed that can be used to establish certain parameters of a thermal vacuum environmental test program based on an optimization of program costs. This model is in the form of a computer program that interacts with a user insofar as the input of certain parameters. The program provides the user a list of pertinent information regarding an optimized test program and graphs of some of the parameters. The model is a first attempt in this area and includes numerous simplifications. The model appears useful as a general guide and provides a way for extrapolating past performance to future missions.

User's manual for three-dimensional analysis of propeller flow fields

NASA Technical Reports Server (NTRS)

Chaussee, D. S.; Kutler, P.

1983-01-01

A detailed operating manual is presented for the prop-fan computer code (in addition to supporting programs) recently developed by Kutler, Chaussee, Sorenson, and Pulliam while at the NASA'S Ames Research Center. This code solves the inviscid Euler equations using an implicit numerical procedure developed by Beam and Warming of Ames. A description of the underlying theory, numerical techniques, and boundary conditions with equations, formulas, and methods for the mesh generation program (MGP), three dimensional prop-fan flow field program (3DPFP), and data reduction program (DRP) is provided, together with complete operating instructions. In addition, a programmer's manual is also provided to assist the user interested in modifying the codes. Included in the programmer's manual for each program is a description of the input and output variables, flow charts, program listings, sample input and output data, and operating hints.

Evaluation of a Digital Game-Based Learning Program for Enhancing Youth Mental Health: A Structural Equation Modeling of the Program Effectiveness.

PubMed

Huen, Jenny My; Lai, Eliza Sy; Shum, Angie Ky; So, Sam Wk; Chan, Melissa Ky; Wong, Paul Wc; Law, Y W; Yip, Paul Sf

2016-10-07

Digital game-based learning (DGBL) makes use of the entertaining power of digital games for educational purposes. Effectiveness assessment of DGBL programs has been underexplored and no attempt has been made to simultaneously model both important components of DGBL: learning attainment (ie, educational purposes of DGBL) and engagement of users (ie, entertaining power of DGBL) in evaluating program effectiveness. This study aimed to describe and evaluate an Internet-based DGBL program, Professor Gooley and the Flame of Mind, which promotes mental health to adolescents in a positive youth development approach. In particular, we investigated whether user engagement in the DGBL program could enhance their attainment on each of the learning constructs per DGBL module and subsequently enhance their mental health as measured by psychological well-being. Users were assessed on their attainment on each learning construct, psychological well-being, and engagement in each of the modules. One structural equation model was constructed for each DGBL module to model the effect of users' engagement and attainment on the learning construct on their psychological well-being. Of the 498 secondary school students that registered and participated from the first module of the DGBL program, 192 completed all 8 modules of the program. Results from structural equation modeling suggested that a higher extent of engagement in the program activities facilitated users' attainment on the learning constructs on most of the modules and in turn enhanced their psychological well-being after controlling for users' initial psychological well-being and initial attainment on the constructs. This study provided evidence that Internet intervention for mental health, implemented with the technologies and digital innovations of DGBL, could enhance youth mental health. Structural equation modeling is a promising approach in evaluating the effectiveness of DGBL programs.

Developing and Negotiating Budgets for Women's Programs.

ERIC Educational Resources Information Center

Massachusetts Univ., Amherst. Everywoman's Center.

The materials on budgeting presented here are based on training programs conducted for women's centers through the Women's Educational Equity Project of the women's center at the University of Massachusetts, Amherst. The booklet's purpose is to provide users with explicit information on developing and negotiating budgets for women's programs.…

Systematic, theoretically-grounded development and feasibility testing of an innovative, preventive web-based game for children exposed to acute trauma

PubMed Central

Marsac, Meghan L.; Winston, Flaura K.; Hildenbrand, Aimee K.; Kohser, Kristen L.; March, Sonja; Kenardy, Justin; Kassam-Adams, Nancy

2015-01-01

Background Millions of children are affected by acute medical events annually, creating need for resources to promote recovery. While web-based interventions promise wide reach and low cost for users, development can be time- and cost-intensive. A systematic approach to intervention development can help to minimize costs and increase likelihood of effectiveness. Using a systematic approach, our team integrated evidence on the etiology of traumatic stress, an explicit program theory, and a user-centered design process to intervention development. Objective To describe evidence and the program theory model applied to the Coping Coach intervention and present pilot data evaluating intervention feasibility and acceptability. Method Informed by empirical evidence on traumatic stress prevention, an overarching program theory model was articulated to delineate pathways from a) specific intervention content to b) program targets and proximal outcomes to c) key longer-term health outcomes. Systematic user-testing with children ages 8–12 (N = 42) exposed to an acute medical event and their parents was conducted throughout intervention development. Results Functionality challenges in early prototypes necessitated revisions. Child engagement was positive throughout revisions to the Coping Coach intervention. Final pilot-testing demonstrated promising feasibility and high user-engagement and satisfaction. Conclusion Applying a systematic approach to the development of Coping Coach led to the creation of a functional intervention that is accepted by children and parents. Development of new e-health interventions may benefit from a similar approach. Future research should evaluate the efficacy of Coping Coach in achieving targeted outcomes of reduced trauma symptoms and improved health-related quality of life. PMID:25844276

A user-friendly, menu-driven, language-free laser characteristics curves graphing program for desk-top IBM PC compatible computers

NASA Technical Reports Server (NTRS)

Klutz, Glenn

1989-01-01

A facility was established that uses collected data and feeds it into mathematical models that generate improved data arrays by correcting for various losses, base line drift, and conversion to unity scaling. These developed data arrays have headers and other identifying information affixed and are subsequently stored in a Laser Materials and Characteristics data base which is accessible to various users. The two part data base: absorption - emission spectra and tabulated data, is developed around twelve laser models. The tabulated section of the data base is divided into several parts: crystalline, optical, mechanical, and thermal properties; aborption and emission spectra information; chemical name and formulas; and miscellaneous. A menu-driven, language-free graphing program will reduce and/or remove the requirement that users become competent FORTRAN programmers and the concomitant requirement that they also spend several days to a few weeks becoming conversant with the GEOGRAF library and sequence of calls and the continual refreshers of both. The work included becoming thoroughly conversant with or at least very familiar with GEOGRAF by GEOCOMP Corp. The development of the graphing program involved trial runs of the various callable library routines on dummy data in order to become familiar with actual implementation and sequencing. This was followed by trial runs with actual data base files and some additional data from current research that was not in the data base but currently needed graphs. After successful runs, with dummy and real data, using actual FORTRAN instructions steps were undertaken to develop the menu-driven language-free implementation of a program which would require the user only know how to use microcomputers. The user would simply be responding to items displayed on the video screen. To assist the user in arriving at the optimum values needed for a specific graph, a paper, and pencil check list was made available to use on the trial runs.

User's guide to programming fault injection and data acquisition in the SIFT environment

NASA Technical Reports Server (NTRS)

Elks, Carl R.; Green, David F.; Palumbo, Daniel L.

1987-01-01

Described are the features, command language, and functional design of the SIFT (Software Implemented Fault Tolerance) fault injection and data acquisition interface software. The document is also intended to assist and guide the SIFT user in defining, developing, and executing SIFT fault injection experiments and the subsequent collection and reduction of that fault injection data. It is also intended to be used in conjunction with the SIFT User's Guide (NASA Technical Memorandum 86289) for reference to SIFT system commands, procedures and functions, and overall guidance in SIFT system programming.

Clueless Newbies in the MUDs: An Introduction to Multiple-User Environments.

ERIC Educational Resources Information Center

LeNoir, W. David

1998-01-01

Describes Multiple-User Dungeons (MUDs), multiple-user computer programs that allow participants to interact with others in "real time" exchanges. Discusses their potential in the writing classroom and beyond, and notes their potential for faculty development activities. Offers a list of Internet resources, some actual MUD addresses, and other…

Proposal for Implementing Multi-User Database (MUD) Technology in an Academic Library.

ERIC Educational Resources Information Center

Filby, A. M. Iliana

1996-01-01

Explores the use of MOO (multi-user object oriented) virtual environments in academic libraries to enhance reference services. Highlights include the development of multi-user database (MUD) technology from gaming to non-recreational settings; programming issues; collaborative MOOs; MOOs as distinguished from other types of virtual reality; audio…

User's manual for the National Water-Quality Assessment Program Invertebrate Data Analysis System (IDAS) software, version 5

USGS Publications Warehouse

Cuffney, Thomas F.; Brightbill, Robin A.

2011-01-01

The Invertebrate Data Analysis System (IDAS) software was developed to provide an accurate, consistent, and efficient mechanism for analyzing invertebrate data collected as part of the U.S. Geological Survey National Water-Quality Assessment (NAWQA) Program. The IDAS software is a stand-alone program for personal computers that run Microsoft Windows(Registered). It allows users to read data downloaded from the NAWQA Program Biological Transactional Database (Bio-TDB) or to import data from other sources either as Microsoft Excel(Registered) or Microsoft Access(Registered) files. The program consists of five modules: Edit Data, Data Preparation, Calculate Community Metrics, Calculate Diversities and Similarities, and Data Export. The Edit Data module allows the user to subset data on the basis of taxonomy or sample type, extract a random subsample of data, combine or delete data, summarize distributions, resolve ambiguous taxa (see glossary) and conditional/provisional taxa, import non-NAWQA data, and maintain and create files of invertebrate attributes that are used in the calculation of invertebrate metrics. The Data Preparation module allows the user to select the type(s) of sample(s) to process, calculate densities, delete taxa on the basis of laboratory processing notes, delete pupae or terrestrial adults, combine lifestages or keep them separate, select a lowest taxonomic level for analysis, delete rare taxa on the basis of the number of sites where a taxon occurs and (or) the abundance of a taxon in a sample, and resolve taxonomic ambiguities by one of four methods. The Calculate Community Metrics module allows the user to calculate 184 community metrics, including metrics based on organism tolerances, functional feeding groups, and behavior. The Calculate Diversities and Similarities module allows the user to calculate nine diversity and eight similarity indices. The Data Export module allows the user to export data to other software packages (CANOCO, Primer, PC-ORD, MVSP) and produce tables of community data that can be imported into spreadsheet, database, graphics, statistics, and word-processing programs. The IDAS program facilitates the documentation of analyses by keeping a log of the data that are processed, the files that are generated, and the program settings used to process the data. Though the IDAS program was developed to process NAWQA Program invertebrate data downloaded from Bio-TDB, the Edit Data module includes tools that can be used to convert non-NAWQA data into Bio-TDB format. Consequently, the data manipulation, analysis, and export procedures provided by the IDAS program can be used to process data generated outside of the NAWQA Program.

Automation of Data Traffic Control on DSM Architecture

NASA Technical Reports Server (NTRS)

Frumkin, Michael; Jin, Hao-Qiang; Yan, Jerry

2001-01-01

The design of distributed shared memory (DSM) computers liberates users from the duty to distribute data across processors and allows for the incremental development of parallel programs using, for example, OpenMP or Java threads. DSM architecture greatly simplifies the development of parallel programs having good performance on a few processors. However, to achieve a good program scalability on DSM computers requires that the user understand data flow in the application and use various techniques to avoid data traffic congestions. In this paper we discuss a number of such techniques, including data blocking, data placement, data transposition and page size control and evaluate their efficiency on the NAS (NASA Advanced Supercomputing) Parallel Benchmarks. We also present a tool which automates the detection of constructs causing data congestions in Fortran array oriented codes and advises the user on code transformations for improving data traffic in the application.

Advancing MEMS Technology Usage through the MUMPS (Multi-User MEMS Processes) Program

NASA Technical Reports Server (NTRS)

Koester, D. A.; Markus, K. W.; Dhuler, V.; Mahadevan, R.; Cowen, A.

1995-01-01

In order to help provide access to advanced micro-electro-mechanical systems (MEMS) technologies and lower the barriers for both industry and academia, the Microelectronic Center of North Carolina (MCNC) and ARPA have developed a program which provides users with access to both MEMS processes and advanced electronic integration techniques. The four distinct aspects of this program, the multi-user MEMS processes (MUMP's), the consolidated micro-mechanical element library, smart MEMS, and the MEMS technology network are described in this paper. MUMP's is an ARPA-supported program created to provide inexpensive access to MEMS technology in a multi-user environment. It is both a proof-of-concept and educational tool that aids in the development of MEMS in the domestic community. MUMP's technologies currently include a 3-layer poly-silicon surface micromachining process and LIGA (lithography, electroforming, and injection molding) processes that provide reasonable design flexibility within set guidelines. The consolidated micromechanical element library (CaMEL) is a library of active and passive MEMS structures that can be downloaded by the MEMS community via the internet. Smart MEMS is the development of advanced electronics integration techniques for MEMS through the application of flip chip technology. The MEMS technology network (TechNet) is a menu of standard substrates and MEMS fabrication processes that can be purchased and combined to create unique process flows. TechNet provides the MEMS community greater flexibility and enhanced technology accessibility.

System support software for the Space Ultrareliable Modular Computer (SUMC)

NASA Technical Reports Server (NTRS)

Hill, T. E.; Hintze, G. C.; Hodges, B. C.; Austin, F. A.; Buckles, B. P.; Curran, R. T.; Lackey, J. D.; Payne, R. E.

1974-01-01

The highly transportable programming system designed and implemented to support the development of software for the Space Ultrareliable Modular Computer (SUMC) is described. The SUMC system support software consists of program modules called processors. The initial set of processors consists of the supervisor, the general purpose assembler for SUMC instruction and microcode input, linkage editors, an instruction level simulator, a microcode grid print processor, and user oriented utility programs. A FORTRAN 4 compiler is undergoing development. The design facilitates the addition of new processors with a minimum effort and provides the user quasi host independence on the ground based operational software development computer. Additional capability is provided to accommodate variations in the SUMC architecture without consequent major modifications in the initial processors.

Research and development of web oriented remote sensing image publication system based on Servlet technique

NASA Astrophysics Data System (ADS)

Juanle, Wang; Shuang, Li; Yunqiang, Zhu

2005-10-01

According to the requirements of China National Scientific Data Sharing Program (NSDSP), the research and development of web oriented RS Image Publication System (RSIPS) is based on Java Servlet technique. The designing of RSIPS framework is composed of 3 tiers, which is Presentation Tier, Application Service Tier and Data Resource Tier. Presentation Tier provides user interface for data query, review and download. For the convenience of users, visual spatial query interface is included. Served as a middle tier, Application Service Tier controls all actions between users and databases. Data Resources Tier stores RS images in file and relationship databases. RSIPS is developed with cross platform programming based on Java Servlet tools, which is one of advanced techniques in J2EE architecture. RSIPS's prototype has been developed and applied in the geosciences clearinghouse practice which is among the experiment units of NSDSP in China.

Recommendations and Privacy Requirements for a Bring-Your-Own-Device User Policy and Agreement

DTIC Science & Technology

2015-03-01

manipulate data from non-traditional workplaces to support mission requirements. The United States Marine Corps (USMC) has started a pilot BYOD program, but...contrasted to obtain a starting point to develop a user agreement for the USMC. The security controls identified within these case studies were also...participating in a BYOD program. A. MARINE CORPS PILOT PROGRAM Starting in January 2015 and at the behest of the USMC, the Marine Corps Network Operations and

Ensemble: an Architecture for Mission-Operations Software

NASA Technical Reports Server (NTRS)

Norris, Jeffrey; Powell, Mark; Fox, Jason; Rabe, Kenneth; Shu, IHsiang; McCurdy, Michael; Vera, Alonso

2008-01-01

Ensemble is the name of an open architecture for, and a methodology for the development of, spacecraft mission operations software. Ensemble is also potentially applicable to the development of non-spacecraft mission-operations- type software. Ensemble capitalizes on the strengths of the open-source Eclipse software and its architecture to address several issues that have arisen repeatedly in the development of mission-operations software: Heretofore, mission-operations application programs have been developed in disparate programming environments and integrated during the final stages of development of missions. The programs have been poorly integrated, and it has been costly to develop, test, and deploy them. Users of each program have been forced to interact with several different graphical user interfaces (GUIs). Also, the strategy typically used in integrating the programs has yielded serial chains of operational software tools of such a nature that during use of a given tool, it has not been possible to gain access to the capabilities afforded by other tools. In contrast, the Ensemble approach offers a low-risk path towards tighter integration of mission-operations software tools.

Land Cover Characterization Program

USGS Publications Warehouse

,

1997-01-01

(2) identify sources, develop procedures, and organize partners to deliver data and information to meet user requirements. The LCCP builds on the heritage and success of previous USGS land use and land cover programs and projects. It will be compatible with current concepts of government operations, the changing needs of the land use and land cover data users, and the technological tools with which the data are applied.

Scheduling language and algorithm development study. Volume 2: Use of the basic language and module library

NASA Technical Reports Server (NTRS)

Chamberlain, R. A.; Cornick, D. E.; Flater, J. F.; Odoherty, R. J.; Peterson, F. M.; Ramsey, H. R.; Willoughby, J. K.

1974-01-01

The capabilities of the specified scheduling language and the program module library are outlined. The summary is written with the potential user in mind and, therefore, provides maximum insight on how the capabilities will be helpful in writing scheduling programs. Simple examples and illustrations are provided to assist the potential user in applying the capabilities of his problem.

VTGRAPH - GRAPHIC SOFTWARE TOOL FOR VT TERMINALS

NASA Technical Reports Server (NTRS)

Wang, C.

1994-01-01

VTGRAPH is a graphics software tool for DEC/VT or VT compatible terminals which are widely used by government and industry. It is a FORTRAN or C-language callable library designed to allow the user to deal with many computer environments which use VT terminals for window management and graphic systems. It also provides a PLOT10-like package plus color or shade capability for VT240, VT241, and VT300 terminals. The program is transportable to many different computers which use VT terminals. With this graphics package, the user can easily design more friendly user interface programs and design PLOT10 programs on VT terminals with different computer systems. VTGRAPH was developed using the ReGis Graphics set which provides a full range of graphics capabilities. The basic VTGRAPH capabilities are as follows: window management, PLOT10 compatible drawing, generic program routines for two and three dimensional plotting, and color graphics or shaded graphics capability. The program was developed in VAX FORTRAN in 1988. VTGRAPH requires a ReGis graphics set terminal and a FORTRAN compiler. The program has been run on a DEC MicroVAX 3600 series computer operating under VMS 5.0, and has a virtual memory requirement of 5KB.

SUTIL: system utilities routines programmer's reference manual

NASA Technical Reports Server (NTRS)

Harper, D.

1976-01-01

A package of FORTRAN callable subroutines which allows efficient communication of data between users and programs is described. Proper utilization of the SUTIL package to reduce program core requirements and expedite program development is emphasized.

Design and Pedagogical Issues in the Development of the InSight Series of Instructional Software.

ERIC Educational Resources Information Center

Baro, John A.; Lehmkulke, Stephen

1993-01-01

Design issues in development of InSight software for optometric education include choice of hardware, identification of audience, definition of scope and limitations of content, selection of user interface and programing environment, obtaining user feedback, and software distribution. Pedagogical issues include practicality and improvement on…

Experience on Mashup Development with End User Programming Environment

ERIC Educational Resources Information Center

Yue, Kwok-Bun

2010-01-01

Mashups, Web applications integrating data and functionality from other Web sources to provide a new service, have quickly become ubiquitous. Because of their role as a focal point in three important trends (Web 2.0, situational software applications, and end user development), mashups are a crucial emerging technology for information systems…

User's Manual for the National Water-Quality Assessment Program Invertebrate Data Analysis System (IDAS) Software: Version 3

USGS Publications Warehouse

Cuffney, Thomas F.

2003-01-01

The Invertebrate Data Analysis System (IDAS) software provides an accurate, consistent, and efficient mechanism for analyzing invertebrate data collected as part of the National Water-Quality Assessment Program and stored in the Biological Transactional Database (Bio-TDB). The IDAS software is a stand-alone program for personal computers that run Microsoft (MS) Windows?. It allows users to read data downloaded from Bio-TDB and stored either as MS Excel? or MS Access? files. The program consists of five modules. The Edit Data module allows the user to subset, combine, delete, and summarize community data. The Data Preparation module allows the user to select the type(s) of sample(s) to process, calculate densities, delete taxa based on laboratory processing notes, combine lifestages or keep them separate, select a lowest taxonomic level for analysis, delete rare taxa, and resolve taxonomic ambiguities. The Calculate Community Metrics module allows the user to calculate over 130 community metrics, including metrics based on organism tolerances and functional feeding groups. The Calculate Diversities and Similarities module allows the user to calculate nine diversity and eight similarity indices. The Data export module allows the user to export data to other software packages and produce tables of community data that can be imported into spreadsheet and word-processing programs. Though the IDAS program was developed to process invertebrate data downloaded from USGS databases, it will work with other data sets that are converted to the USGS (Bio-TDB) format. Consequently, the data manipulation, analysis, and export procedures provided by the IDAS program can be used by anyone involved in using benthic macroinvertebrates in applied or basic research.

User participation in the development of the human/computer interface for control centers

NASA Technical Reports Server (NTRS)

Broome, Richard; Quick-Campbell, Marlene; Creegan, James; Dutilly, Robert

1996-01-01

Technological advances coupled with the requirements to reduce operations staffing costs led to the demand for efficient, technologically-sophisticated mission operations control centers. The control center under development for the earth observing system (EOS) is considered. The users are involved in the development of a control center in order to ensure that it is cost-efficient and flexible. A number of measures were implemented in the EOS program in order to encourage user involvement in the area of human-computer interface development. The following user participation exercises carried out in relation to the system analysis and design are described: the shadow participation of the programmers during a day of operations; the flight operations personnel interviews; and the analysis of the flight operations team tasks. The user participation in the interface prototype development, the prototype evaluation, and the system implementation are reported on. The involvement of the users early in the development process enables the requirements to be better understood and the cost to be reduced.

Definition and testing of the hydrologic component of the pilot land data system

NASA Technical Reports Server (NTRS)

Ragan, Robert M.; Sircar, Jayanta K.

1987-01-01

The specific aim was to develop within the Pilot Land Data System (PLDS) software design environment, an easily implementable and user friendly geometric correction procedure to readily enable the georeferencing of imagery data from the Advanced Very High Resolution Radiometer (AVHRR) onboard the NOAA series spacecraft. A software subsystem was developed within the guidelines set by the PLDS development environment utilizing NASA Goddard Space Flight Center (GSFC) Image Analysis Facility's (IAF's) Land Analysis Software (LAS) coding standards. The IAS current program development environment, the Transportable Applications Executive (TAE), operates under a VAX VMS operating system and was used as the user interface. A brief overview of the ICARUS algorithm that was implemented in the set of functions developed, is provided. The functional specifications decription is provided, and a list of the individual programs and directory names containing the source and executables installed in the IAF system are listed. A user guide is provided for the LAS system documentation format for the three functions developed.

FAST User Guide

NASA Technical Reports Server (NTRS)

Walatka, Pamela P.; Clucas, Jean; McCabe, R. Kevin; Plessel, Todd; Potter, R.; Cooper, D. M. (Technical Monitor)

1994-01-01

The Flow Analysis Software Toolkit, FAST, is a software environment for visualizing data. FAST is a collection of separate programs (modules) that run simultaneously and allow the user to examine the results of numerical and experimental simulations. The user can load data files, perform calculations on the data, visualize the results of these calculations, construct scenes of 3D graphical objects, and plot, animate and record the scenes. Computational Fluid Dynamics (CFD) visualization is the primary intended use of FAST, but FAST can also assist in the analysis of other types of data. FAST combines the capabilities of such programs as PLOT3D, RIP, SURF, and GAS into one environment with modules that share data. Sharing data between modules eliminates the drudgery of transferring data between programs. All the modules in the FAST environment have a consistent, highly interactive graphical user interface. Most commands are entered by pointing and'clicking. The modular construction of FAST makes it flexible and extensible. The environment can be custom configured and new modules can be developed and added as needed. The following modules have been developed for FAST: VIEWER, FILE IO, CALCULATOR, SURFER, TOPOLOGY, PLOTTER, TITLER, TRACER, ARCGRAPH, GQ, SURFERU, SHOTET, and ISOLEVU. A utility is also included to make the inclusion of user defined modules in the FAST environment easy. The VIEWER module is the central control for the FAST environment. From VIEWER, the user can-change object attributes, interactively position objects in three-dimensional space, define and save scenes, create animations, spawn new FAST modules, add additional view windows, and save and execute command scripts. The FAST User Guide uses text and FAST MAPS (graphical representations of the entire user interface) to guide the user through the use of FAST. Chapters include: Maps, Overview, Tips, Getting Started Tutorial, a separate chapter for each module, file formats, and system administration.

Modular Engine Noise Component Prediction System (MCP) Program Users' Guide

NASA Technical Reports Server (NTRS)

Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.

2004-01-01

This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).

Feasibility and acceptability of a novel, computerized screening and brief intervention (SBI) for alcohol and sweetened beverage use in pregnancy.

PubMed

Nayak, Madhabika B; Korcha, Rachael A; Kaskutas, Lee A; Kaskustas, Lee A; Avalos, Lyndsay A

2014-11-25

Recommended screening and brief intervention (SBI) for alcohol use during pregnancy is impeded by high patient loads and limited resources in public health settings. We evaluated the feasibility, acceptability and validity of a new self-administered, single-session, bilingual, computerized Screening and Brief Intervention (SBI) program for alcohol and sugar sweetened beverage (SSB) use in pregnancy. We developed and tested the computerized SBI program at a public health clinic with 290 pregnant women. Feasibility, acceptability, and validity measures were included in the program which had several modules, including those on demographics, health and beverage use. Time to complete the program and user experience items were used to determine program feasibility and acceptability. Validity analyses compared proportions of prenatal alcohol use identified by the program versus in-person screening by clinic staff. Most program users (87%, n = 251) completed the entire program; 91% (n = 263) completed the key screening and brief intervention modules. Most users also completed the program in ten to fifteen minutes. Program users reported that the program was easy to use (97%), they learned something new (88%), and that they would share what they learned with others (83%) and with their doctors or clinic staff (76%). Program acceptability did not differ by age, education, or type of beverage intervention received. The program identified alcohol use in pregnancy among 21% of users, a higher rate than the 13% (p < .01) found via screening by clinic staff. Computerized Screening and Brief Intervention for alcohol and SSB use in public health clinics is feasible and acceptable to English and Spanish speaking pregnant women and can efficiently identify prenatal alcohol use.

NutriSonic web expert system for meal management and nutrition counseling with nutrient time-series analysis, e-food exchange and easy data transition.

PubMed

Hong, Soon-Myung; Cho, Jee-Ye; Lee, Jin-Hee; Kim, Gon; Kim, Min-Chan

2008-01-01

This study was conducted to develop the NutriSonic Web Expert System for Meal Management and Nutrition Counseling with Analysis of User's Nutritive Changes of selected days and food exchange information with easy data transition. This program manipulates a food, menu and meal and search database that has been developed. Also, the system provides a function to check the user's nutritive change of selected days. Users can select a recommended general and therapeutic menu using this system. NutriSonic can analyze nutrients and e-food exchange ("e" means the food exchange data base calculated by a computer program) in menus and meals. The expert can insert and store a meal database and generate the synthetic information of age, sex and therapeutic purpose of disease. With investigation and analysis of the user's needs, the meal planning program on the internet has been continuously developed. Users are able to follow up their nutritive changes with nutrient information and ratio of 3 major energy nutrients. Also, users can download another data format like Excel files (.xls) for analysis and verify their nutrient time-series analysis. The results of analysis are presented quickly and accurately. Therefore it can be used by not only usual people, but also by dietitians and nutritionists who take charge of making a menu and experts in the field of food and nutrition. It is expected that the NutriSonic Web Expert System can be useful for nutrition education, nutrition counseling and expert meal management.

Service User Involvement in UK Social Service Agencies and Social Work Education

ERIC Educational Resources Information Center

Goossen, Carolyn; Austin, Michael J.

2017-01-01

Forming partnerships with service users became a requirement for social work education programs in the United Kingdom as of 2003, leading to the development of innovative approaches to social work education that involve service users as experts who are helping to teach the future generation of social workers. This article examines the perceptions…

Longitudinal Surveys of Australian Youth (LSAY) 2003 Cohort: User Guide. Technical Report 54

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

The Longitudinal Surveys of Australian Youth (LSAY) is a research program that tracks young people as they move from school into further study, work and other destinations. This "User guide" has been developed for users of the LSAY data. The guide endeavours to consolidate existing technical documentation and other relevant information…

Library Services for Users of Personal Digital Assistants: A Needs Assessment and Program Evaluation

ERIC Educational Resources Information Center

Carney, Stephen; Koufogiannakis, Denise; Ryan, Pam

2007-01-01

Research was undertaken to guide development of services for personal digital assistant (PDA) users at the University of Alberta Libraries. A variety of qualitative methods were used to assess user satisfaction with current PDA services and identify potential PDA services for the libraries and resources. The research and needs assessment results…

Usage of Thin-Client/Server Architecture in Computer Aided Education

ERIC Educational Resources Information Center

Cimen, Caghan; Kavurucu, Yusuf; Aydin, Halit

2014-01-01

With the advances of technology, thin-client/server architecture has become popular in multi-user/single network environments. Thin-client is a user terminal in which the user can login to a domain and run programs by connecting to a remote server. Recent developments in network and hardware technologies (cloud computing, virtualization, etc.)…

Integration of an expert system into a user interface language demonstration

NASA Technical Reports Server (NTRS)

Stclair, D. C.

1986-01-01

The need for a User Interface Language (UIL) has been recognized by the Space Station Program Office as a necessary tool to aid in minimizing the cost of software generation by multiple users. Previous history in the Space Shuttle Program has shown that many different areas of software generation, such as operations, integration, testing, etc., have each used a different user command language although the types of operations being performed were similar in many respects. Since the Space Station represents a much more complex software task, a common user command language--a user interface language--is required to support the large spectrum of space station software developers and users. To assist in the selection of an appropriate set of definitions for a UIL, a series of demonstration programs was generated with which to test UIL concepts against specific Space Station scenarios using operators for the astronaut and scientific community. Because of the importance of expert system in the space station, it was decided that an expert system should be embedded in the UIL. This would not only provide insight into the UIL components required but would indicate the effectiveness with which an expert system could function in such an environment.

Collection Development for the School Library Media Program: A Beginner's Guide

ERIC Educational Resources Information Center

Kerby, Mona

2006-01-01

A valuable resource for new or experienced school librarians, "Collection Development for the School Library Media Program: A Beginner's Guide" is an easy-to-use guide to collection development. It provides practical and relevant information about collection development issues such as: the school users, policies, selection criteria and sources,…

Repository-based software engineering program: Concept document

NASA Technical Reports Server (NTRS)

1992-01-01

This document provides the context for Repository-Based Software Engineering's (RBSE's) evolving functional and operational product requirements, and it is the parent document for development of detailed technical and management plans. When furnished, requirements documents will serve as the governing RBSE product specification. The RBSE Program Management Plan will define resources, schedules, and technical and organizational approaches to fulfilling the goals and objectives of this concept. The purpose of this document is to provide a concise overview of RBSE, describe the rationale for the RBSE Program, and define a clear, common vision for RBSE team members and customers. The document also provides the foundation for developing RBSE user and system requirements and a corresponding Program Management Plan. The concept is used to express the program mission to RBSE users and managers and to provide an exhibit for community review.

Citric Acid Alternative to Nitric Acid Passivation

NASA Technical Reports Server (NTRS)

Lewis, Pattie L. (Compiler)

2013-01-01

The Ground Systems Development and Operations GSDO) Program at NASA John F. Kennedy Space Center (KSC) has the primary objective of modernizing and transforming the launch and range complex at KSC to benefit current and future NASA programs along with other emerging users. Described as the launch support and infrastructure modernization program in the NASA Authorization Act of 2010, the GSDO Program will develop and implement shared infrastructure and process improvements to provide more flexible, affordable, and responsive capabilities to a multi-user community. In support of the GSDO Program, the purpose of this project is to demonstratevalidate citric acid as a passivation agent for stainless steel. Successful completion of this project will result in citric acid being qualified for use as an environmentally preferable alternative to nitric acid for passivation of stainless steel alloys in NASA and DoD applications.

A User's Guide for the Differential Reduced Ejector/Mixer Analysis "DREA" Program. 1.0

NASA Technical Reports Server (NTRS)

DeChant, Lawrence J.; Nadell, Shari-Beth

1999-01-01

A system of analytical and numerical two-dimensional mixer/ejector nozzle models that require minimal empirical input has been developed and programmed for use in conceptual and preliminary design. This report contains a user's guide describing the operation of the computer code, DREA (Differential Reduced Ejector/mixer Analysis), that contains these mathematical models. This program is currently being adopted by the Propulsion Systems Analysis Office at the NASA Glenn Research Center. A brief summary of the DREA method is provided, followed by detailed descriptions of the program input and output files. Sample cases demonstrating the application of the program are presented.

Optimizing diffusion of an online computer tailored lifestyle program: a study protocol.

PubMed

Schneider, Francine; van Osch, Liesbeth A D M; Kremers, Stef P J; Schulz, Daniela N; van Adrichem, Mathieu J G; de Vries, Hein

2011-06-20

Although the Internet is a promising medium to offer lifestyle interventions to large amounts of people at relatively low costs and effort, actual exposure rates of these interventions fail to meet the high expectations. Since public health impact of interventions is determined by intervention efficacy and level of exposure to the intervention, it is imperative to put effort in optimal dissemination. The present project attempts to optimize the dissemination process of a new online computer tailored generic lifestyle program by carefully studying the adoption process and developing a strategy to achieve sustained use of the program. A prospective study will be conducted to yield relevant information concerning the adoption process by studying the level of adoption of the program, determinants involved in adoption and characteristics of adopters and non-adopters as well as satisfied and unsatisfied users. Furthermore, a randomized control trial will be conducted to the test the effectiveness of a proactive strategy using periodic e-mail prompts in optimizing sustained use of the new program. Closely mapping the adoption process will gain insight in characteristics of adopters and non-adopters and satisfied and unsatisfied users. This insight can be used to further optimize the program by making it more suitable for a wider range of users, or to develop adjusted interventions to attract subgroups of users that are not reached or satisfied with the initial intervention. Furthermore, by studying the effect of a proactive strategy using period prompts compared to a reactive strategy to stimulate sustained use of the intervention and, possibly, behaviour change, specific recommendations on the use and the application of prompts in online lifestyle interventions can be developed. Dutch Trial Register NTR1786 and Medical Ethics Committee of Maastricht University and the University Hospital Maastricht (NL2723506809/MEC0903016).

Development of Integrated Programs for Aerospace-Vehicle Design (IPAD) - IPAD user requirements

NASA Technical Reports Server (NTRS)

Anderton, G. L.

1979-01-01

Results of a requirements analysis task for Integrated Programs for Aerospace Vehicle Design (IPAD) are presented. User requirements which, in part, will shape the IPAD system design are given. Requirements considered were: generation, modification, storage, retrieval, communication, reporting, and protection of information. Data manipulation and controls on the system and the information were also considered. Specific needs relative to the product design process are also discussed.

The STS pilot user development program

NASA Technical Reports Server (NTRS)

Mcdowell, J. R.

1977-01-01

The planning and preparation activities and the results of the briefings associated with the Paris Air Show are described. A team of key personnel were available during the show to familiarize international users with the STS program and the space shuttle capabilities. Participation at the show included the operation of an STS booth at the U.S. pavilion, the presentation of several invitational briefings, and detailed discussions with individual organizations.

A mathematical model for Vertical Attitude Takeoff and Landing (VATOL) aircraft simulation. Volume 3: User's manual for VATOL simulation program

NASA Technical Reports Server (NTRS)

Fortenbaugh, R. L.

1980-01-01

Instructions for using Vertical Attitude Takeoff and Landing Aircraft Simulation (VATLAS), the digital simulation program for application to vertical attitude takeoff and landing (VATOL) aircraft developed for installation on the NASA Ames CDC 7600 computer system are described. The framework for VATLAS is the Off-Line Simulation (OLSIM) routine. The OLSIM routine provides a flexible framework and standardized modules which facilitate the development of off-line aircraft simulations. OLSIM runs under the control of VTOLTH, the main program, which calls the proper modules for executing user specified options. These options include trim, stability derivative calculation, time history generation, and various input-output options.

DOE Office of Scientific and Technical Information (OSTI.GOV)

March-Leuba, S.; Jansen, J.F.; Kress, R.L.

A new program package, Symbolic Manipulator Laboratory (SML), for the automatic generation of both kinematic and static manipulator models in symbolic form is presented. Critical design parameters may be identified and optimized using symbolic models as shown in the sample application presented for the Future Armor Rearm System (FARS) arm. The computer-aided development of the symbolic models yields equations with reduced numerical complexity. Important considerations have been placed on the closed form solutions simplification and on the user friendly operation. The main emphasis of this research is the development of a methodology which is implemented in a computer program capablemore » of generating symbolic kinematic and static forces models of manipulators. The fact that the models are obtained trigonometrically reduced is among the most significant results of this work and the most difficult to implement. Mathematica, a commercial program that allows symbolic manipulation, is used to implement the program package. SML is written such that the user can change any of the subroutines or create new ones easily. To assist the user, an on-line help has been written to make of SML a user friendly package. Some sample applications are presented. The design and optimization of the 5-degrees-of-freedom (DOF) FARS manipulator using SML is discussed. Finally, the kinematic and static models of two different 7-DOF manipulators are calculated symbolically.« less

A review of some problems in global-local stress analysis

NASA Technical Reports Server (NTRS)

Nelson, Richard B.

1989-01-01

The various types of local-global finite-element problems point out the need to develop a new generation of software. First, this new software needs to have a complete analysis capability, encompassing linear and nonlinear analysis of 1-, 2-, and 3-dimensional finite-element models, as well as mixed dimensional models. The software must be capable of treating static and dynamic (vibration and transient response) problems, including the stability effects of initial stress, and the software should be able to treat both elastic and elasto-plastic materials. The software should carry a set of optional diagnostics to assist the program user during model generation in order to help avoid obvious structural modeling errors. In addition, the program software should be well documented so the user has a complete technical reference for each type of element contained in the program library, including information on such topics as the type of numerical integration, use of underintegration, and inclusion of incompatible modes, etc. Some packaged information should also be available to assist the user in building mixed-dimensional models. An important advancement in finite-element software should be in the development of program modularity, so that the user can select from a menu various basic operations in matrix structural analysis.

Programming support environment issues in the Byron programming environment

NASA Technical Reports Server (NTRS)

Larsen, Matthew J.

1986-01-01

Issues are discussed which programming support environments need to address in order to successfully support software engineering. These concerns are divided into two categories. The first category, issues of how software development is supported by an environment, includes support of the full life cycle, methodology flexibility, and support of software reusability. The second category contains issues of how environments should operate, such as tool reusability and integration, user friendliness, networking, and use of a central data base. This discussion is followed by an examination of Byron, an Ada based programming support environment developed at Intermetrics, focusing on the solutions Byron offers to these problems, including the support provided for software reusability and the test and maintenance phases of the life cycle. The use of Byron in project development is described briefly, and some suggestions for future Byron tools and user written tools are presented.

The DEVELOP National Program: Building Dual Capacity in Decision Makers and Young Professionals Through NASA Earth Observations

NASA Astrophysics Data System (ADS)

Childs, L. M.; Rogers, L.; Favors, J.; Ruiz, M.

2012-12-01

Through the years, NASA has played a distinct/important/vital role in advancing Earth System Science to meet the challenges of environmental management and policy decision making. Within NASA's Earth Science Division's Applied Sciences' Program, the DEVELOP National Program seeks to extend NASA Earth Science for societal benefit. DEVELOP is a capacity building program providing young professionals and students the opportunity to utilize NASA Earth observations and model output to demonstrate practical applications of those resources to society. Under the guidance of science advisors, DEVELOP teams work in alignment with local, regional, national and international partner organizations to identify the widest array of practical uses for NASA data to enhance related management decisions. The program's structure facilitates a two-fold approach to capacity building by fostering an environment of scientific and professional development opportunities for young professionals and students, while also providing end-user organizations enhanced management and decision making tools for issues impacting their communities. With the competitive nature and growing societal role of science and technology in today's global workplace, DEVELOP is building capacity in the next generation of scientists and leaders by fostering a learning and growing environment where young professionals possess an increased understanding of teamwork, personal development, and scientific/professional development and NASA's Earth Observation System. DEVELOP young professionals are partnered with end user organizations to conduct 10 week feasibility studies that demonstrate the use of NASA Earth science data for enhanced decision making. As a result of the partnership, end user organizations are introduced to NASA Earth Science technologies and capabilities, new methods to augment current practices, hands-on training with practical applications of remote sensing and NASA Earth science, improved remote sensing and geographic information science (GIS) capabilities, and opportunities for networking with the NASA and Earth Science community. By engaging young professionals and end user organizations, DEVELOP strives to uniquely build capacity through the extension of NASA Earth Science outcomes to the public through projects that innovatively use NASA Earth observations to address environmental concerns and impact policy and decision making.

SILVAH-OAK: ensuring adoption by engaging users in the full cycle of forest research

Treesearch

Susan L. Stout; Pat Brose; Kurt Gottschalk; Gary Miller; Pete Knopp; Gary Rutherford; Mark Deibler; Gary Frank; Gary Gilmore

2007-01-01

Recent Forest Service Research and Development (FS R&D) logic modeling efforts focused on program delivery stated that an important precondition for effective science delivery was the engagement of users and partners throughout the full research and development cycle. The ongoing partnership among the Pennsylvania Department of Conservation and Natural Resources...

A generalized development model for testing GPS user equipment

NASA Technical Reports Server (NTRS)

Hemesath, N.

1978-01-01

The generalized development model (GDM) program, which was intended to establish how well GPS user equipment can perform under a combination of jamming and dynamics, is described. The systems design and the characteristics of the GDM are discussed. The performance aspects of the GDM are listed and the application of the GDM to civil aviation is examined.

Users Guide to VSMOKE-GIS for Workstations

Treesearch

Mary F. Harms; Leonidas G. Lavdas

1997-01-01

VSMOKE-GIS was developed to help prescribed burners in the national forests of the Southeastern United States visualize smoke dispersion and to plan prescribed burns. Developed for use on workstations, this decision-support system consists of a graphical user interface, written in Arc/Info Arc Macro Language, and is linked to a FORTRAN computer program. VSMOKE-GIS...

Program Helps Simulate Neural Networks

NASA Technical Reports Server (NTRS)

Villarreal, James; Mcintire, Gary

1993-01-01

Neural Network Environment on Transputer System (NNETS) computer program provides users high degree of flexibility in creating and manipulating wide variety of neural-network topologies at processing speeds not found in conventional computing environments. Supports back-propagation and back-propagation-related algorithms. Back-propagation algorithm used is implementation of Rumelhart's generalized delta rule. NNETS developed on INMOS Transputer(R). Predefines back-propagation network, Jordan network, and reinforcement network to assist users in learning and defining own networks. Also enables users to configure other neural-network paradigms from NNETS basic architecture. Small portion of software written in OCCAM(R) language.

Computer-assisted instruction and diagnosis of radiographic findings.

PubMed

Harper, D; Butler, C; Hodder, R; Allman, R; Woods, J; Riordan, D

1984-04-01

Recent advances in computer technology, including high bit-density storage, digital imaging, and the ability to interface microprocessors with videodisk, create enormous opportunities in the field of medical education. This program, utilizing a personal computer, videodisk, BASIC language, a linked textfile system, and a triangulation approach to the interpretation of radiographs developed by Dr. W. L. Thompson, can enable the user to engage in a user-friendly, dynamic teaching program in radiology, applicable to various levels of expertise. Advantages include a relatively more compact and inexpensive system with rapid access and ease of revision which requires little instruction to the user.

Development of Educational Support System for Learning Image Processing Enabling Client-Side Programming Aided by Java Servlet Technology

NASA Astrophysics Data System (ADS)

Furukawa, Tatsuya; Aoki, Noriyuki; Ohchi, Masashi; Nakao, Masaki

The image proccessing has become a useful and important technology in various reserch and development fields. According to such demands for engineering problems, we have designed and implemented the educational support system for that using a Java Applet technology. However in the conventional system, it required the tedious procedure for the end user to code his own programs. Therefore, in this study, we have improved the defect in the previous system by using a Java Servlet technology. The new system will make it possible for novice user to experience a practical digital image proccessing and an advanced programming with ease. We will describe the architecture of the proposed system function, that has been introduced to facilitate the client-side programming.

Radiology Teacher: a free, Internet-based radiology teaching file server.

PubMed

Talanow, Roland

2009-12-01

Teaching files are an essential ingredient in residency education. The online program Radiology Teacher was developed to allow the creation of interactive and customized teaching files in real time. Online access makes it available anytime and anywhere, and it is free of charge, user tailored, and easy to use. No programming skills, additional plug-ins, or installations are needed, allowing its use even on protected intranets. Special effects for enhancing the learning experience as well as the linking and the source code are created automatically by the program. It may be used in different modes by individuals and institutions to share cases from multiple authors in a single database. Radiology Teacher is an easy-to-use automatic teaching file program that may enhance users' learning experiences by offering different modes of user-defined presentations.

Protecting proprietary rights - A potential Shuttle user's view

NASA Technical Reports Server (NTRS)

Day, J. B.

1977-01-01

Maintaining a high degree of industrial security in the multiple-payload Shuttle environment poses a number of problems for NASA. As a part of Battelle-Columbus' support of NASA's User Development Program, this paper presents a potential user's perspective on this situation. The need for security, the nature of the problem, and precedents for NASA security measures are discussed. Eleven policy guidelines representing desirable features from a potential user's viewpoint are presented for NASA consideration.

Software for Automated Reading of STEP Files by I-DEAS(trademark)

NASA Technical Reports Server (NTRS)

Pinedo, John

2003-01-01

A program called "readstep" enables the I-DEAS(tm) computer-aided-design (CAD) software to automatically read Standard for the Exchange of Product Model Data (STEP) files. (The STEP format is one of several used to transfer data between dissimilar CAD programs.) Prior to the development of "readstep," it was necessary to read STEP files into I-DEAS(tm) one at a time in a slow process that required repeated intervention by the user. In operation, "readstep" prompts the user for the location of the desired STEP files and the names of the I-DEAS(tm) project and model file, then generates an I-DEAS(tm) program file called "readstep.prg" and two Unix shell programs called "runner" and "controller." The program "runner" runs I-DEAS(tm) sessions that execute readstep.prg, while "controller" controls the execution of "runner" and edits readstep.prg if necessary. The user sets "runner" and "controller" into execution simultaneously, and then no further intervention by the user is required. When "runner" has finished, the user should see only parts from successfully read STEP files present in the model file. STEP files that could not be read successfully (e.g., because of format errors) should be regenerated before attempting to read them again.

CTTITEM: SAS macro and SPSS syntax for classical item analysis.

PubMed

Lei, Pui-Wa; Wu, Qiong

2007-08-01

This article describes the functions of a SAS macro and an SPSS syntax that produce common statistics for conventional item analysis including Cronbach's alpha, item difficulty index (p-value or item mean), and item discrimination indices (D-index, point biserial and biserial correlations for dichotomous items and item-total correlation for polytomous items). These programs represent an improvement over the existing SAS and SPSS item analysis routines in terms of completeness and user-friendliness. To promote routine evaluations of item qualities in instrument development of any scale, the programs are available at no charge for interested users. The program codes along with a brief user's manual that contains instructions and examples are downloadable from suen.ed.psu.edu/-pwlei/plei.htm.

Automatic programming of simulation models

NASA Technical Reports Server (NTRS)

Schroer, Bernard J.; Tseng, Fan T.; Zhang, Shou X.; Dwan, Wen S.

1990-01-01

The concepts of software engineering were used to improve the simulation modeling environment. Emphasis was placed on the application of an element of rapid prototyping, or automatic programming, to assist the modeler define the problem specification. Then, once the problem specification has been defined, an automatic code generator is used to write the simulation code. The following two domains were selected for evaluating the concepts of software engineering for discrete event simulation: manufacturing domain and a spacecraft countdown network sequence. The specific tasks were to: (1) define the software requirements for a graphical user interface to the Automatic Manufacturing Programming System (AMPS) system; (2) develop a graphical user interface for AMPS; and (3) compare the AMPS graphical interface with the AMPS interactive user interface.

TAE Plus: Transportable Applications Environment Plus tools for building graphic-oriented applications

NASA Technical Reports Server (NTRS)

Szczur, Martha R.

1989-01-01

The Transportable Applications Environment Plus (TAE Plus), developed by NASA's Goddard Space Flight Center, is a portable User Interface Management System (UIMS), which provides an intuitive WYSIWYG WorkBench for prototyping and designing an application's user interface, integrated with tools for efficiently implementing the designed user interface and effective management of the user interface during an application's active domain. During the development of TAE Plus, many design and implementation decisions were based on the state-of-the-art within graphics workstations, windowing system and object-oriented programming languages. Some of the problems and issues experienced during implementation are discussed. A description of the next development steps planned for TAE Plus is also given.

Cutter Resource Effectiveness Evaluation (CREE) Program : A Guide for Users and Analysts

DOT National Transportation Integrated Search

1978-03-01

The Cutter Resource Effectiveness Evaluation (CREE) project has developed a sophisticated, user-oriented computer model which can evaluate the effectiveness of any existing Coast Guard craft, or the effectiveness of any of a number of proposed altern...

Development and Evaluation of a Mobile Application for Personal Lifestyle Check-Up and Improvement

PubMed Central

Youm, Sekyoung

2014-01-01

Abstract Objective: This study aimed (1) to help individuals analyze their own health status by checking their lifestyle, (2) to develop a user-friendly mobile application that offered prescriptions for lifestyle improvement, and (3) to examine whether the developed application had positive effects on users. Materials and Methods: In order to develop a lifestyle analysis engine that would operate in an Android® (Google, Mountain View, CA)-based mobile application, survey data on health awareness behaviors of 25,124 participants from the 2009 Korean National Health and Nutrition Examination Survey (KNHANES) were analyzed. Additionally, in order for the users to be aware of their lifestyles and explore the effects of the developed mobile application on lifestyle management and improvement, an additional survey of the lifestyle awareness and levels of motivation for lifestyle improvement of 152 users was conducted. Results: The differences between lifestyles before and after using the application were examined. A paired t test was used for questions regarding (1) the level of motivation to improve lifestyles and (2) changes in lifestyle. The lifestyle score was lower after using the program than before using it. Conversely, the level of motivation to improve lifestyle was greater after the program than before it. Both results were statistically significant. Conclusions: By using the KNHANES, this study developed a mobile application that compared the quantified lifestyles of individuals and enabled individuals to check easily their health statuses, whenever and wherever necessary. The program developed in this study contributed to motivating individuals to be aware of and to improve their lifestyles. PMID:25384255

Development and evaluation of a mobile application for personal lifestyle check-up and improvement.

PubMed

Youm, Sekyoung; Park, Seung-Hun

2014-11-01

This study aimed (1) to help individuals analyze their own health status by checking their lifestyle, (2) to develop a user-friendly mobile application that offered prescriptions for lifestyle improvement, and (3) to examine whether the developed application had positive effects on users. In order to develop a lifestyle analysis engine that would operate in an Android(®) (Google, Mountain View, CA)-based mobile application, survey data on health awareness behaviors of 25,124 participants from the 2009 Korean National Health and Nutrition Examination Survey (KNHANES) were analyzed. Additionally, in order for the users to be aware of their lifestyles and explore the effects of the developed mobile application on lifestyle management and improvement, an additional survey of the lifestyle awareness and levels of motivation for lifestyle improvement of 152 users was conducted. The differences between lifestyles before and after using the application were examined. A paired t test was used for questions regarding (1) the level of motivation to improve lifestyles and (2) changes in lifestyle. The lifestyle score was lower after using the program than before using it. Conversely, the level of motivation to improve lifestyle was greater after the program than before it. Both results were statistically significant. By using the KNHANES, this study developed a mobile application that compared the quantified lifestyles of individuals and enabled individuals to check easily their health statuses, whenever and wherever necessary. The program developed in this study contributed to motivating individuals to be aware of and to improve their lifestyles.

Customizing for clients: developing a library liaison program from need to plan.

PubMed

Tennant, M R; Butson, L C; Rezeau, M E; Tucker, P J; Boyle, M E; Clayton, G

2001-01-01

Building on the experiences of librarian representatives to curriculum committees in the colleges of dentistry, medicine, and nursing, the Health Science Center Libraries (HSCL) Strategic Plan recommended the formation of a Library Liaison Work Group to create a formal Library Liaison Program to serve the six Health Science Center (HSC) colleges and several affiliated centers and institutes. The work group's charge was to define the purpose and scope of the program, identify models of best practice, and recommend activities for liaisons. The work group gathered background information, performed an environmental scan, and developed a philosophy statement, a program of liaison activities focusing on seven primary areas, and a forum for liaison communication. Hallmarks of the plan included intensive subject specialization (beyond collection development), extensive communication with users, and personal information services. Specialization was expected to promote competence, communication, confidence, comfort, and customization. Development of the program required close coordination with other strategic plan implementation teams, including teams for collection development, education, and marketing. This paper discusses the HSCL's planning process and the resulting Library Liaison Program. Although focusing on an academic health center, the planning process and liaison model may be applied to any library serving diverse, subject-specific user populations.

Customizing for clients: developing a library liaison program from need to plan*

PubMed Central

Tennant, Michele R.; Butson, Linda C.; Rezeau, Michelle E.; Tucker, Prudence J.; Boyle, Marian E.; Clayton, Greg

2001-01-01

Building on the experiences of librarian representatives to curriculum committees in the colleges of dentistry, medicine, and nursing, the Health Science Center Libraries (HSCL) Strategic Plan recommended the formation of a Library Liaison Work Group to create a formal Library Liaison Program to serve the six Health Science Center (HSC) colleges and several affiliated centers and institutes. The work group's charge was to define the purpose and scope of the program, identify models of best practice, and recommend activities for liaisons. The work group gathered background information, performed an environmental scan, and developed a philosophy statement, a program of liaison activities focusing on seven |primary areas, and a forum for liaison communication. Hallmarks of the plan included intensive subject specialization (beyond collection development), extensive communication with users, and personal information services. Specialization was expected to promote competence, communication, confidence, comfort, and customization. Development of the program required close coordination with other strategic plan implementation teams, including teams for collection development, education, and marketing. This paper discusses the HSCL's planning process and the resulting Library Liaison Program. Although focusing on an academic health center, the planning process and liaison model may be applied to any library serving diverse, subject-specific user populations. PMID:11209807

LabVIEW: a software system for data acquisition, data analysis, and instrument control.

PubMed

Kalkman, C J

1995-01-01

Computer-based data acquisition systems play an important role in clinical monitoring and in the development of new monitoring tools. LabVIEW (National Instruments, Austin, TX) is a data acquisition and programming environment that allows flexible acquisition and processing of analog and digital data. The main feature that distinguishes LabVIEW from other data acquisition programs is its highly modular graphical programming language, "G," and a large library of mathematical and statistical functions. The advantage of graphical programming is that the code is flexible, reusable, and self-documenting. Subroutines can be saved in a library and reused without modification in other programs. This dramatically reduces development time and enables researchers to develop or modify their own programs. LabVIEW uses a large amount of processing power and computer memory, thus requiring a powerful computer. A large-screen monitor is desirable when developing larger applications. LabVIEW is excellently suited for testing new monitoring paradigms, analysis algorithms, or user interfaces. The typical LabVIEW user is the researcher who wants to develop a new monitoring technique, a set of new (derived) variables by integrating signals from several existing patient monitors, closed-loop control of a physiological variable, or a physiological simulator.

CROSSER - CUMULATIVE BINOMIAL PROGRAMS

NASA Technical Reports Server (NTRS)

Bowerman, P. N.

1994-01-01

The cumulative binomial program, CROSSER, is one of a set of three programs which calculate cumulative binomial probability distributions for arbitrary inputs. The three programs, CROSSER, CUMBIN (NPO-17555), and NEWTONP (NPO-17556), can be used independently of one another. CROSSER can be used by statisticians and users of statistical procedures, test planners, designers, and numerical analysts. The program has been used for reliability/availability calculations. CROSSER calculates the point at which the reliability of a k-out-of-n system equals the common reliability of the n components. It is designed to work well with all integer values 0 < k <= n. To run the program, the user simply runs the executable version and inputs the information requested by the program. The program is not designed to weed out incorrect inputs, so the user must take care to make sure the inputs are correct. Once all input has been entered, the program calculates and lists the result. It also lists the number of iterations of Newton's method required to calculate the answer within the given error. The CROSSER program is written in C. It was developed on an IBM AT with a numeric co-processor using Microsoft C 5.0. Because the source code is written using standard C structures and functions, it should compile correctly with most C compilers. The program format is interactive. It has been implemented under DOS 3.2 and has a memory requirement of 26K. CROSSER was developed in 1988.

HKHC Community Dashboard: design, development, and function of a Web-based performance monitoring system.

PubMed

Bors, Philip A; Kemner, Allison; Fulton, John; Stachecki, Jessica; Brennan, Laura K

2015-01-01

As part of Robert Wood Johnson Foundation's Healthy Kids, Healthy Communities (HKHC) national grant program, a technical assistance team designed the HKHC Community Dashboard, an online progress documentation and networking system. The Dashboard was central to HKHC's multimethod program evaluation and became a communication interface for grantees and technical assistance providers. The Dashboard was designed through an iterative process of identifying needs and priorities; designing the user experience, technical development, and usability testing; and applying visual design. The system was created with an open-source content management system and support for building an online community of users. The site developer trained technical assistance providers at the national program office and evaluators, who subsequently trained all 49 grantees. Evaluators provided support for Dashboard users and populated the site with the bulk of its uploaded tools and resource documents. The system tracked progress through an interactive work plan template, regular documentation by local staff and partners, and data coding and analysis by the evaluation team. Other features included the ability to broadcast information to Dashboard users via e-mail, event calendars, discussion forums, private messaging, a resource clearinghouse, a technical assistance diary, and real-time progress reports. The average number of Dashboard posts was 694 per grantee during the grant period. Technical assistance providers and grantees uploaded a total of 1304 resource documents. The Dashboard functions with the highest grantee satisfaction were its interfaces for sharing and progress documentation. A majority of Dashboard users (69%) indicated a preference for continued access to the Dashboard's uploaded resource documents. The Dashboard was a useful and innovative tool for participatory evaluation of a large national grant program. While progress documentation added some burden to local project staff, the system proved to be a useful resource-sharing technology.

Commercial Research and Development: Power to Explore, Opportunities from Discovery

NASA Technical Reports Server (NTRS)

Casas, Joseph C.; Nall, Mark; Powers, C. Blake; Henderson, Robin N. (Technical Monitor)

2002-01-01

The technical and economic goals of commercial use of space are laudable, and are addressed as a high priority by almost every national space program and most major aerospace companies the world over. Yet, the focus of most organizational agendas and discussions tends to focus on one or two very narrow enabling aspects of this potentially large technological and economic opportunity. While government sponsored commercial launch activities and private space platforms are an integral part of efforts to leverage the commercial use of space, these activities are possibly one of the smallest parts of creating, a viable and sustainable market for the commercial use of space. Most of the current programs usually do not appropriately address some of the critical issues of the current, already interested, potential space user communities. Current programs place the focus of the majority of the user requirements on the vehicle payload weight and mass performance considerations as the primary payload economical factor in providing a commercial market with a stimulating price for gaining access to the space environment. The larger user challenges of transformation from Earth-based research and development approaches to space environment approaches are not addressed early enough in programs to impact the new business considerations of potential users. Currently, space-based research and development user activities require a large user investment in time, in development of new areas of support expertise, in development of new systems, in risk of schedule to completion, and in long term capital positioning. The larger opportunities for stimulating a strong market driven interest in commercial use of space that could result from the development of vehicle payload "leap ahead technologies" for users are being missed, and there is a real risk of limiting the potentially broader market base to support a more technologically advanced and economically lucrative outcome. A major driving force for strengthening the commercial space activities is not only the technological advances in launch vehicle, or newer satellites, but the myriad of enabling payloads technologies that could, as a goal, result in an almost transparent facilitation to regular CD a, -n access to space and microgravity environments by the future users from the existing Earth-based research and development organizations market segments. Rather than focusing only on developing high lift performance launch vehicles and then developing payloads to fit them, the real focus from a business model perspective should to be on the customer payloads requirements, and on designing launch vehicles and platforms systems for a space transportation and facility infrastructure to support all aspects of the business model for the user market. To harness the full potential of space commercialization, new efforts need to be made to comprehensively examine all the critical business model areas for commercial research, development, and manufacturing in space so as to identify specific products and efforts; to determine how such operations must be both similar to and different from current Earth-based activities; to evaluate the enabling technological devices, processes and efforts so that like efforts can be addressed in a synergistic fashion for maximum user cost effectiveness; to delineate the services that are both needed and can be provided by such activities; and to use this information to drive design and development of space commercialization efforts and policy.

Java-based Graphical User Interface for MAVERIC-II

NASA Technical Reports Server (NTRS)

Seo, Suk Jai

2005-01-01

A computer program entitled "Marshall Aerospace Vehicle Representation in C II, (MAVERIC-II)" is a vehicle flight simulation program written primarily in the C programming language. It is written by James W. McCarter at NASA/Marshall Space Flight Center. The goal of the MAVERIC-II development effort is to provide a simulation tool that facilitates the rapid development of high-fidelity flight simulations for launch, orbital, and reentry vehicles of any user-defined configuration for all phases of flight. MAVERIC-II has been found invaluable in performing flight simulations for various Space Transportation Systems. The flexibility provided by MAVERIC-II has allowed several different launch vehicles, including the Saturn V, a Space Launch Initiative Two-Stage-to-Orbit concept and a Shuttle-derived launch vehicle, to be simulated during ascent and portions of on-orbit flight in an extremely efficient manner. It was found that MAVERIC-II provided the high fidelity vehicle and flight environment models as well as the program modularity to allow efficient integration, modification and testing of advanced guidance and control algorithms. In addition to serving as an analysis tool for techno logy development, many researchers have found MAVERIC-II to be an efficient, powerful analysis tool that evaluates guidance, navigation, and control designs, vehicle robustness, and requirements. MAVERIC-II is currently designed to execute in a UNIX environment. The input to the program is composed of three segments: 1) the vehicle models such as propulsion, aerodynamics, and guidance, navigation, and control 2) the environment models such as atmosphere and gravity, and 3) a simulation framework which is responsible for executing the vehicle and environment models and propagating the vehicle s states forward in time and handling user input/output. MAVERIC users prepare data files for the above models and run the simulation program. They can see the output on screen and/or store in files and examine the output data later. Users can also view the output stored in output files by calling a plotting program such as gnuplot. A typical scenario of the use of MAVERIC consists of three-steps; editing existing input data files, running MAVERIC, and plotting output results.

Investigation of the Feasibility of an Intervention to Manage Fall Risk in Wheeled Mobility Device Users with Multiple Sclerosis.

PubMed

Rice, Laura A; Isaacs, Zadok; Ousley, Cherita; Sosnoff, Jacob

2018-01-01

Falls are a common concern for wheeled mobility device users with multiple sclerosis (MS); however, no evidence-based fall prevention programs have been developed to meet the specific needs of the population. We examine the preliminary feasibility of a fall management intervention in wheeled mobility device users with MS. Study participants were exposed to an intervention program targeting risk factors for falls, including transfer skills and seated postural control. The feasibility of the program was evaluated by assessing participant perspectives, cost, recruitment rates, study adherence, participant retention, safety, and the ability to collect primary and secondary outcomes, including fall frequency, concerns about falling, transfer quality, and seated postural control. 16 wheeled mobility device users completed the program, which was found to be feasible and was positively evaluated by participants. No adverse events were experienced. After exposure to the intervention, fall frequency significantly decreased (P < .001) and transfer quality (P = .001) and seated postural control (P = .002) significantly improved. No significant differences were found regarding concerns about falling (P = .728). This study examined the feasibility of an intervention program to manage fall risk in wheeled mobility device users with MS. The program was found to be feasible, and preliminary results showed the intervention to be effective in decreasing fall frequency. Additional testing is needed to further examine the efficacy and long-term impact of the intervention.

LABORATORY PROCESS CONTROLLER USING NATURAL LANGUAGE COMMANDS FROM A PERSONAL COMPUTER

NASA Technical Reports Server (NTRS)

Will, H.

1994-01-01

The complex environment of the typical research laboratory requires flexible process control. This program provides natural language process control from an IBM PC or compatible machine. Sometimes process control schedules require changes frequently, even several times per day. These changes may include adding, deleting, and rearranging steps in a process. This program sets up a process control system that can either run without an operator, or be run by workers with limited programming skills. The software system includes three programs. Two of the programs, written in FORTRAN77, record data and control research processes. The third program, written in Pascal, generates the FORTRAN subroutines used by the other two programs to identify the user commands with the user-written device drivers. The software system also includes an input data set which allows the user to define the user commands which are to be executed by the computer. To set the system up the operator writes device driver routines for all of the controlled devices. Once set up, this system requires only an input file containing natural language command lines which tell the system what to do and when to do it. The operator can make up custom commands for operating and taking data from external research equipment at any time of the day or night without the operator in attendance. This process control system requires a personal computer operating under MS-DOS with suitable hardware interfaces to all controlled devices. The program requires a FORTRAN77 compiler and user-written device drivers. This program was developed in 1989 and has a memory requirement of about 62 Kbytes.

RGG: A general GUI Framework for R scripts

PubMed Central

Visne, Ilhami; Dilaveroglu, Erkan; Vierlinger, Klemens; Lauss, Martin; Yildiz, Ahmet; Weinhaeusel, Andreas; Noehammer, Christa; Leisch, Friedrich; Kriegner, Albert

2009-01-01

Background R is the leading open source statistics software with a vast number of biostatistical and bioinformatical analysis packages. To exploit the advantages of R, extensive scripting/programming skills are required. Results We have developed a software tool called R GUI Generator (RGG) which enables the easy generation of Graphical User Interfaces (GUIs) for the programming language R by adding a few Extensible Markup Language (XML) – tags. RGG consists of an XML-based GUI definition language and a Java-based GUI engine. GUIs are generated in runtime from defined GUI tags that are embedded into the R script. User-GUI input is returned to the R code and replaces the XML-tags. RGG files can be developed using any text editor. The current version of RGG is available as a stand-alone software (RGGRunner) and as a plug-in for JGR. Conclusion RGG is a general GUI framework for R that has the potential to introduce R statistics (R packages, built-in functions and scripts) to users with limited programming skills and helps to bridge the gap between R developers and GUI-dependent users. RGG aims to abstract the GUI development from individual GUI toolkits by using an XML-based GUI definition language. Thus RGG can be easily integrated in any software. The RGG project further includes the development of a web-based repository for RGG-GUIs. RGG is an open source project licensed under the Lesser General Public License (LGPL) and can be downloaded freely at PMID:19254356

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wahanani, Nursinta Adi, E-mail: sintaadi@batan.go.id; Natsir, Khairina, E-mail: sintaadi@batan.go.id; Hartini, Entin, E-mail: sintaadi@batan.go.id

Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this softwaremore » 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu{sup 239} and Pu{sup 241}. Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis.« less

An evaluation of the documented requirements of the SSP UIL and a review of commercial software packages for the development and testing of UIL prototypes

NASA Technical Reports Server (NTRS)

Gill, Esther Naomi

1986-01-01

A review was conducted of software packages currently on the market which might be integrated with the interface language and aid in reaching the objectives of customization, standardization, transparency, reliability, maintainability, language substitutions, expandability, portability, and flexibility. Recommendations are given for best choices in hardware and software acquisition for inhouse testing of these possible integrations. Software acquisition in the line of tools to aid expert-system development and/or novice program development, artificial intelligent voice technology and touch screen or joystick or mouse utilization as well as networking were recommended. Other recommendations concerned using the language Ada for the user interface language shell because of its high level of standardization, structure, and ability to accept and execute programs written in other programming languages, its DOD ownership and control, and keeping the user interface language simple so that multiples of users will find the commercialization of space within their realm of possibility which is, after all, the purpose of the Space Station.

75 FR 33704 - Loan Guaranty: Elimination of Redundant Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-15

... budgetary impact of entitlements, grants, user fees, or loan programs or the rights and obligations of..., Handicapped, Housing, Indians, Individuals with disabilities, Loan programs--housing and community development...

Object-oriented microcomputer software for earthquake seismology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kroeger, G.C.

1993-02-01

A suite of graphically interactive applications for the retrieval, editing and modeling of earthquake seismograms have been developed using object-orientation programming methodology and the C++ language. Retriever is an application which allows the user to search for, browse, and extract seismic data from CD-ROMs produced by the National Earthquake Information Center (NEIC). The user can restrict the date, size, location and depth of desired earthquakes and extract selected data into a variety of common seismic file formats. Reformer is an application that allows the user to edit seismic data and data headers, and perform a variety of signal processing operationsmore » on that data. Synthesizer is a program for the generation and analysis of teleseismic P and SH synthetic seismograms. The program provides graphical manipulation of source parameters, crustal structures and seismograms, as well as near real-time response in generating synthetics for arbitrary flat-layered crustal structures. All three applications use class libraries developed for implementing geologic and seismic objects and views. Standard seismogram view objects and objects that encapsulate the reading and writing of different seismic data file formats are shared by all three applications. The focal mechanism views in Synthesizer are based on a generic stereonet view object. Interaction with the native graphical user interface is encapsulated in a class library in order to simplify the porting of the software to different operating systems and application programming interfaces. The software was developed on the Apple Macintosh and is being ported to UNIX/X-Window platforms.« less

SIG: a general-purpose signal processing program. User's manual. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lager, D.; Azevedo, S.

1985-05-09

SIG is a general-purpose signal processing, analysis, and display program. Its main purpose is to perform manipulations on time-domain and frequenccy-domain signals. The manual contains a complete description of the SIG program from the user's stand-point. A brief exercise in using SIG is shown. Complete descriptions are given of each command in the SIG core. General information about the SIG structure, command processor, and graphics options are provided. An example usage of SIG for solving a problem is developed, and error message formats are briefly discussed. (LEW)

User's Manual for Computer Program ROTOR. [to calculate tilt-rotor aircraft dynamic characteristics

NASA Technical Reports Server (NTRS)

Yasue, M.

1974-01-01

A detailed description of a computer program to calculate tilt-rotor aircraft dynamic characteristics is presented. This program consists of two parts: (1) the natural frequencies and corresponding mode shapes of the rotor blade and wing are developed from structural data (mass distribution and stiffness distribution); and (2) the frequency response (to gust and blade pitch control inputs) and eigenvalues of the tilt-rotor dynamic system, based on the natural frequencies and mode shapes, are derived. Sample problems are included to assist the user.

Integrating Computer-Based Career Development into Your Career Planning Program.

ERIC Educational Resources Information Center

Campbell, Robert B.; Mack, Sharon E.

This paper focuses on the real and theoretical usefulness of a computer-based career development system in a career planning program, based on a 2-year pilot program evaluating the DISCOVER system. The system overview discusses components and contents of DISCOVER, and describes the 11 modules which assist users in learning about their values,…

A graphical, rule based robotic interface system

NASA Technical Reports Server (NTRS)

Mckee, James W.; Wolfsberger, John

1988-01-01

The ability of a human to take control of a robotic system is essential in any use of robots in space in order to handle unforeseen changes in the robot's work environment or scheduled tasks. But in cases in which the work environment is known, a human controlling a robot's every move by remote control is both time consuming and frustrating. A system is needed in which the user can give the robotic system commands to perform tasks but need not tell the system how. To be useful, this system should be able to plan and perform the tasks faster than a telerobotic system. The interface between the user and the robot system must be natural and meaningful to the user. A high level user interface program under development at the University of Alabama, Huntsville, is described. A graphical interface is proposed in which the user selects objects to be manipulated by selecting representations of the object on projections of a 3-D model of the work environment. The user may move in the work environment by changing the viewpoint of the projections. The interface uses a rule based program to transform user selection of items on a graphics display of the robot's work environment into commands for the robot. The program first determines if the desired task is possible given the abilities of the robot and any constraints on the object. If the task is possible, the program determines what movements the robot needs to make to perform the task. The movements are transformed into commands for the robot. The information defining the robot, the work environment, and how objects may be moved is stored in a set of data bases accessible to the program and displayable to the user.

Sustainable Land Imaging User Requirements

NASA Astrophysics Data System (ADS)

Wu, Z.; Snyder, G.; Vadnais, C. M.

2017-12-01

The US Geological Survey (USGS) Land Remote Sensing Program (LRSP) has collected user requirements from a range of applications to help formulate the Landsat 9 follow-on mission (Landsat 10) through the Requirements, Capabilities and Analysis (RCA) activity. The USGS is working with NASA to develop Landsat 10, which is scheduled to launch in the 2027 timeframe as part of the Sustainable Land Imaging program. User requirements collected through RCA will help inform future Landsat 10 sensor designs and mission characteristics. Current Federal civil community users have provided hundreds of requirements through systematic, in-depth interviews. Academic, State, local, industry, and international Landsat user community input was also incorporated in the process. Emphasis was placed on spatial resolution, temporal revisit, and spectral characteristics, as well as other aspects such as accuracy, continuity, sampling condition, data access and format. We will provide an overview of the Landsat 10 user requirements collection process and summary results of user needs from the broad land imagining community.

Education of MIS Users: One Hospital's Experience

PubMed Central

Jacobs, Patt

1982-01-01

Dr. Stanley Jacobs has identified at least five factors which impact the amount of effort required to implement a hospital based computer system. One of these factors is clearly the users of the system. This paper focuses upon the implementation process at St. Vincent Hospital and Medical Center (SVH&MC) highlighting the user education program developed by the hospital DP staff.

Is the GUI approach to Computer Development (For Example, Mac, and Windows Technology) a Threat to Computer Users Who Are Blind?

ERIC Educational Resources Information Center

Melrose, S.; And Others

1995-01-01

In this point/counterpoint feature, S. Melrose contends that complex graphical user interfaces (GUIs) threaten the independence and equal employment of individuals with blindness. D. Wakefield then points out that access to the Windows software program for blind computer users is extremely unpredictable, and J. Gill describes a major European…

User-Customizing HIS Interface by Light Programming Tool: the Case of Redesigning the Nursing Kardex with InfoPath 2003

PubMed Central

Chang, Tsuei-Rung; Chang, Polun

2006-01-01

Due to lack of IT resources, the End-User Computing strategy seems useful for the front-end users to develop and customize their own information application. We taught the nurses to use the InfoPath 2003 to design their own card-filing Kardex system and observed promising results. PMID:17238497

Guidelines for NASA Missions to Engage the User Community as a Part of the Mission Life Cycle

NASA Astrophysics Data System (ADS)

Escobar, V. M.; Friedl, L.; Bonniksen, C. K.

2017-12-01

NASA continues to improve the Earth Science Directorate in the areas of thematic integration, stakeholder feedback and Project Applications Program tailoring for missions to transfer knowledge between scientists and projects. The integration of application themes and the implementation of application science activities in flight projects have evolved to formally include user feedback and stakeholder integration. NASA's new Flight Applied Science Program Guidelines are designed to bridge NASA Earth Science Directorates in Flight, Applied Sciences and Research and Development by agreeing to integrate the user community into mission life cycles. Thus science development and science applications will guide all new instruments launched by NASAs ESD. The continued integration with the user community has enabled socio-economic considerations into NASA Earth Science projects to advance significantly. Making users a natural part of mission science leverages future socio-economic impact research and provides a platform for innovative and more actionable product to be used in decision support systems by society. This presentation will give an overview of the new NASA Guidelines and provide samples that demonstrate how the user community can be a part of NASA mission designs.

Graphics and composite material computer program enhancements for SPAR

NASA Technical Reports Server (NTRS)

Farley, G. L.; Baker, D. J.

1980-01-01

User documentation is provided for additional computer programs developed for use in conjunction with SPAR. These programs plot digital data, simplify input for composite material section properties, and compute lamina stresses and strains. Sample problems are presented including execution procedures, program input, and graphical output.

Creation of the selection list for the Experiment Scheduling Program (ESP)

NASA Technical Reports Server (NTRS)

Deuermeyer, B. L.; Shannon, R. E.; Underbrink, A. J., Jr.

1986-01-01

The efforts to develop a procedure to construct selection groups to augment the Experiment Scheduling Program (ESP) are summarized. Included is a User's Guide and a sample scenario to guide in the use of the software system that implements the developed procedures.

An Assessment System for Competence Based Education: The Educational Development, Dissemination, and Evaluation Training Program.

ERIC Educational Resources Information Center

Hood, Paul D.; Blackwell, Laird

This manual provides a description of the development and a guide to the use of the assessment resources developed in connection with the Far West Development, Dissemination, and Evaluation (DD&E) Functional Competence Training Program. The document concentrates on a user-oriented description of the content, validation, and use of the final…

Baseline Motivation Type as a Predictor of Dropout in a Healthy Eating Text Messaging Program.

PubMed

Coa, Kisha; Patrick, Heather

2016-09-29

Growing evidence suggests that text messaging programs are effective in facilitating health behavior change. However, high dropout rates limit the potential effectiveness of these programs. This paper describes patterns of early dropout in the HealthyYou text (HYTxt) program, with a focus on the impact of baseline motivation quality on dropout, as characterized by Self-Determination Theory (SDT). This analysis included 193 users of HYTxt, a diet and physical activity text messaging intervention developed by the US National Cancer Institute. Descriptive statistics were computed, and logistic regression models were run to examine the association between baseline motivation type and early program dropout. Overall, 43.0% (83/193) of users dropped out of the program; of these, 65.1% (54/83; 28.0% of all users) did so within the first 2 weeks. Users with higher autonomous motivation had significantly lower odds of dropping out within the first 2 weeks. A one unit increase in autonomous motivation was associated with lower odds (odds ratio 0.44, 95% CI 0.24-0.81) of early dropout, which persisted after adjusting for level of controlled motivation. Applying SDT-based strategies to enhance autonomous motivation might reduce early dropout rates, which can improve program exposure and effectiveness.

[Testing a Model to Predict Problem Gambling in Speculative Game Users].

PubMed

Park, Hyangjin; Kim, Suk Sun

2018-04-01

The purpose of the study was to develop and test a model for predicting problem gambling in speculative game users based on Blaszczynski and Nower's pathways model of problem and pathological gambling. The participants were 262 speculative game users recruited from seven speculative gambling places located in Seoul, Gangwon, and Gyeonggi, Korea. They completed a structured self-report questionnaire comprising measures of problem gambling, negative emotions, attentional impulsivity, motor impulsivity, non-planning impulsivity, gambler's fallacy, and gambling self-efficacy. Structural Equation Modeling was used to test the hypothesized model and to examine the direct and indirect effects on problem gambling in speculative game users using SPSS 22.0 and AMOS 20.0 programs. The hypothetical research model provided a reasonable fit to the data. Negative emotions, motor impulsivity, gambler's fallacy, and gambling self-efficacy had direct effects on problem gambling in speculative game users, while indirect effects were reported for negative emotions, motor impulsivity, and gambler's fallacy. These predictors explained 75.2% problem gambling in speculative game users. The findings suggest that developing intervention programs to reduce negative emotions, motor impulsivity, and gambler's fallacy, and to increase gambling self-efficacy in speculative game users are needed to prevent their problem gambling. © 2018 Korean Society of Nursing Science.

Accelerating Science with the NERSC Burst Buffer Early User Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhimji, Wahid; Bard, Debbie; Romanus, Melissa

NVRAM-based Burst Buffers are an important part of the emerging HPC storage landscape. The National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory recently installed one of the first Burst Buffer systems as part of its new Cori supercomputer, collaborating with Cray on the development of the DataWarp software. NERSC has a diverse user base comprised of over 6500 users in 700 different projects spanning a wide variety of scientific computing applications. The use-cases of the Burst Buffer at NERSC are therefore also considerable and diverse. We describe here performance measurements and lessons learned from the Burstmore » Buffer Early User Program at NERSC, which selected a number of research projects to gain early access to the Burst Buffer and exercise its capability to enable new scientific advancements. To the best of our knowledge this is the first time a Burst Buffer has been stressed at scale by diverse, real user workloads and therefore these lessons will be of considerable benefit to shaping the developing use of Burst Buffers at HPC centers.« less

Survey of computer programs for heat transfer analysis

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.

1986-01-01

An overview is given of the current capabilities of thirty-three computer programs that are used to solve heat transfer problems. The programs considered range from large general-purpose codes with broad spectrum of capabilities, large user community, and comprehensive user support (e.g., ABAQUS, ANSYS, EAL, MARC, MITAS II, MSC/NASTRAN, and SAMCEF) to the small, special-purpose codes with limited user community such as ANDES, NTEMP, TAC2D, TAC3D, TEPSA and TRUMP. The majority of the programs use either finite elements or finite differences for the spatial discretization. The capabilities of the programs are listed in tabular form followed by a summary of the major features of each program. The information presented herein is based on a questionnaire sent to the developers of each program. This information is preceded by a brief background material needed for effective evaluation and use of computer programs for heat transfer analysis. The present survey is useful in the initial selection of the programs which are most suitable for a particular application. The final selection of the program to be used should, however, be based on a detailed examination of the documentation and the literature about the program.

Evaluating Mobile Survey Tools (MSTs) for Field-Level Monitoring and Data Collection: Development of a Novel Evaluation Framework, and Application to MSTs for Rural Water and Sanitation Monitoring

PubMed Central

Fisher, Michael B.; Mann, Benjamin H.; Cronk, Ryan D.; Shields, Katherine F.; Klug, Tori L.; Ramaswamy, Rohit

2016-01-01

Information and communications technologies (ICTs) such as mobile survey tools (MSTs) can facilitate field-level data collection to drive improvements in national and international development programs. MSTs allow users to gather and transmit field data in real time, standardize data storage and management, automate routine analyses, and visualize data. Dozens of diverse MST options are available, and users may struggle to select suitable options. We developed a systematic MST Evaluation Framework (EF), based on International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) software quality modeling standards, to objectively assess MSTs and assist program implementers in identifying suitable MST options. The EF is applicable to MSTs for a broad variety of applications. We also conducted an MST user survey to elucidate needs and priorities of current MST users. Finally, the EF was used to assess seven MSTs currently used for water and sanitation monitoring, as a validation exercise. The results suggest that the EF is a promising method for evaluating MSTs. PMID:27563916

Evaluating Mobile Survey Tools (MSTs) for Field-Level Monitoring and Data Collection: Development of a Novel Evaluation Framework, and Application to MSTs for Rural Water and Sanitation Monitoring.

PubMed

Fisher, Michael B; Mann, Benjamin H; Cronk, Ryan D; Shields, Katherine F; Klug, Tori L; Ramaswamy, Rohit

2016-08-23

Information and communications technologies (ICTs) such as mobile survey tools (MSTs) can facilitate field-level data collection to drive improvements in national and international development programs. MSTs allow users to gather and transmit field data in real time, standardize data storage and management, automate routine analyses, and visualize data. Dozens of diverse MST options are available, and users may struggle to select suitable options. We developed a systematic MST Evaluation Framework (EF), based on International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) software quality modeling standards, to objectively assess MSTs and assist program implementers in identifying suitable MST options. The EF is applicable to MSTs for a broad variety of applications. We also conducted an MST user survey to elucidate needs and priorities of current MST users. Finally, the EF was used to assess seven MSTs currently used for water and sanitation monitoring, as a validation exercise. The results suggest that the EF is a promising method for evaluating MSTs.

A Grounded Theory of Professional Learning in an Authentic Online Professional Development Program

ERIC Educational Resources Information Center

Teräs, Hanna; Kartoglu, Umit

2017-01-01

Online professional development (OPD) programs have become increasingly popular. However, participating in professional development does not always lead to profound professional learning. Previous research endeavours have often focussed on measuring user acceptance or on comparing the effectiveness of OPD with a face-to-face delivery, but there is…

BUY CLEAN MANUAL INTERACTIVE CD-ROM

EPA Science Inventory

This interactive CD-ROM contains exercises and opportunities to help users develop a Buy Clean Program for janitorial cleaning products. CD users can learn about Material Safety Data Sheets (MSDS), complete an inventory list, and compare cleaning products to see which have the le...

Environmentally-Preferable Launch Coatings

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2015-01-01

The Ground Systems Development and Operations (GSDO) Program at NASA Kennedy Space Center (KSC), Florida, has the primary objective of modernizing and transforming the launch and range complex at KSC to benefit current and future NASA programs along with other emerging users. Described as the launch support and infrastructure modernization program in the NASA Authorization Act of 2010, the GSDO Program will develop and implement shared infrastructure and process improvements to provide more flexible, affordable, and responsive capabilities to a multi-user community. In support of NASA and the GSDO Program, the objective of this project is to determine the feasibility of environmentally friendly corrosion protecting coatings for launch facilities and ground support equipment (GSE). The focus of the project is corrosion resistance and survivability with the goal to reduce the amount of maintenance required to preserve the performance of launch facilities while reducing mission risk. The project compares coating performance of the selected alternatives to existing coating systems or standards.

A Computer Program for Drip Irrigation System Design for Small Plots

NASA Astrophysics Data System (ADS)

Philipova, Nina; Nicheva, Olga; Kazandjiev, Valentin; Chilikova-Lubomirova, Mila

2012-12-01

A computer programhas been developed for design of surface drip irrigation system. It could be applied for calculation of small scale fields with an area up to 10 ha. The program includes two main parts: crop water requirements and hydraulic calculations of the system. It has been developed in Graphical User Interface in MATLAB and gives opportunity for selecting some parameters from tables such as: agro- physical soil properties, characteristics of the corresponding crop, climatic data. It allows the user of the program to assume and set a definite value, for example the emitter discharge, plot parameters and etc. Eight cases of system layout according to the water source layout and the number of plots of the system operation are laid into hydraulic section of the program. It includes the design of lateral, manifold, main line and pump calculations. The program has been compiled to work in Windows.

Computer user's manual for a generalized curve fit and plotting program

NASA Technical Reports Server (NTRS)

Schlagheck, R. A.; Beadle, B. D., II; Dolerhie, B. D., Jr.; Owen, J. W.

1973-01-01

A FORTRAN coded program has been developed for generating plotted output graphs on 8-1/2 by 11-inch paper. The program is designed to be used by engineers, scientists, and non-programming personnel on any IBM 1130 system that includes a 1627 plotter. The program has been written to provide a fast and efficient method of displaying plotted data without having to generate any additions. Various output options are available to the program user for displaying data in four different types of formatted plots. These options include discrete linear, continuous, and histogram graphical outputs. The manual contains information about the use and operation of this program. A mathematical description of the least squares goodness of fit test is presented. A program listing is also included.

Data-Driven Software Framework for Web-Based ISS Telescience

NASA Technical Reports Server (NTRS)

Tso, Kam S.

2005-01-01

Software that enables authorized users to monitor and control scientific payloads aboard the International Space Station (ISS) from diverse terrestrial locations equipped with Internet connections is undergoing development. This software reflects a data-driven approach to distributed operations. A Web-based software framework leverages prior developments in Java and Extensible Markup Language (XML) to create portable code and portable data, to which one can gain access via Web-browser software on almost any common computer. Open-source software is used extensively to minimize cost; the framework also accommodates enterprise-class server software to satisfy needs for high performance and security. To accommodate the diversity of ISS experiments and users, the framework emphasizes openness and extensibility. Users can take advantage of available viewer software to create their own client programs according to their particular preferences, and can upload these programs for custom processing of data, generation of views, and planning of experiments. The same software system, possibly augmented with a subset of data and additional software tools, could be used for public outreach by enabling public users to replay telescience experiments, conduct their experiments with simulated payloads, and create their own client programs and other custom software.

Knowledge-based approach to system integration

NASA Technical Reports Server (NTRS)

Blokland, W.; Krishnamurthy, C.; Biegl, C.; Sztipanovits, J.

1988-01-01

To solve complex problems one can often use the decomposition principle. However, a problem is seldom decomposable into completely independent subproblems. System integration deals with problem of resolving the interdependencies and the integration of the subsolutions. A natural method of decomposition is the hierarchical one. High-level specifications are broken down into lower level specifications until they can be transformed into solutions relatively easily. By automating the hierarchical decomposition and solution generation an integrated system is obtained in which the declaration of high level specifications is enough to solve the problem. We offer a knowledge-based approach to integrate the development and building of control systems. The process modeling is supported by using graphic editors. The user selects and connects icons that represent subprocesses and might refer to prewritten programs. The graphical editor assists the user in selecting parameters for each subprocess and allows the testing of a specific configuration. Next, from the definitions created by the graphical editor, the actual control program is built. Fault-diagnosis routines are generated automatically as well. Since the user is not required to write program code and knowledge about the process is present in the development system, the user is not required to have expertise in many fields.

U.S. Army PEM fuel cell programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patil, A.S.; Jacobs, R.

The United States Army has identified the need for lightweight power sources to provide the individual soldier with continuous power for extended periods without resupply. Due to the high cost of primary batteries and the high weight of rechargeable batteries, fuel cell technology is being developed to provide a power source for the individual soldier, sensors, communications equipment and other various applications in the Army. Current programs are in the tech base area and will demonstrate Proton Exchange Membrane (PEM) Fuel Cell Power Sources with low weight and high energy densities. Fuel Cell Power Sources underwent user evaluations in 1996more » that showed a power source weight reduction of 75%. The quiet operation along with the ability to refuel much like an engine was well accepted by the user and numerous applications were investigated. These programs are now aimed at further weight reduction for applications that are weight critical; system integration that will demonstrate a viable military power source; refining the user requirements; and planning for a transition to engineering development.« less

Instrumentino: An Open-Source Software for Scientific Instruments.

PubMed

Koenka, Israel Joel; Sáiz, Jorge; Hauser, Peter C

2015-01-01

Scientists often need to build dedicated computer-controlled experimental systems. For this purpose, it is becoming common to employ open-source microcontroller platforms, such as the Arduino. These boards and associated integrated software development environments provide affordable yet powerful solutions for the implementation of hardware control of transducers and acquisition of signals from detectors and sensors. It is, however, a challenge to write programs that allow interactive use of such arrangements from a personal computer. This task is particularly complex if some of the included hardware components are connected directly to the computer and not via the microcontroller. A graphical user interface framework, Instrumentino, was therefore developed to allow the creation of control programs for complex systems with minimal programming effort. By writing a single code file, a powerful custom user interface is generated, which enables the automatic running of elaborate operation sequences and observation of acquired experimental data in real time. The framework, which is written in Python, allows extension by users, and is made available as an open source project.

Commercial potential of remote sensing data from the Earth observing system

NASA Technical Reports Server (NTRS)

Merry, Carolyn J.; Tomlin, Sandra M.

1992-01-01

The purpose was to assess the market potential of remote sensing value-added products from the Earth Observing System (EOS) platform. Sensors on the EOS platform were evaluated to determine which qualities and capabilities could be useful to the commercial user. The approach was to investigate past and future satellite data distribution programs. A questionnaire was developed for use in a telephone survey. Based on the results of the survey of companies that add value to remotely sensed data, conversations with the principal investigators in charge of each EOS sensor, a study of past commercial satellite data ventures, and reading from the commercial remote sensing industry literature, three recommendations were developed: develop a strategic plan for commercialization of EOS data, define a procedure for commercial users within the EOS data stream, and develop an Earth Observations Commercial Applications Program-like demonstration program within NASA using EOS simulated data.

A Comparative Analysis of Four Individualized Instructional Delivery Systems with Adult Learners. Final Report.

ERIC Educational Resources Information Center

Holzbauer, Ida; Florell, Robert J.

Because many pesticides are potentially injurious to their users and can have a deleterious effect on the environment when misused, the Environmental Protection Agency has restricted the use of some chemicals to certified users only. A program was developed to assess the need for training in pesticide use, to develop the necessary curriculum, to…

Energy consumption program: A computer model simulating energy loads in buildings

NASA Technical Reports Server (NTRS)

Stoller, F. W.; Lansing, F. L.; Chai, V. W.; Higgins, S.

1978-01-01

The JPL energy consumption computer program developed as a useful tool in the on-going building modification studies in the DSN energy conservation project is described. The program simulates building heating and cooling loads and computes thermal and electric energy consumption and cost. The accuracy of computations are not sacrificed, however, since the results lie within + or - 10 percent margin compared to those read from energy meters. The program is carefully structured to reduce both user's time and running cost by asking minimum information from the user and reducing many internal time-consuming computational loops. Many unique features were added to handle two-level electronics control rooms not found in any other program.

E-Mentoring for Social Equity: Review of Research to Inform Program Development

ERIC Educational Resources Information Center

Single, Peg Boyle; Single, Richard M.

2005-01-01

The advent of user-friendly email programs and web browsers created possibilities for widespread use of e-mentoring programs. In this review of the research, we presented the history of e-mentoring programs and defined e-mentoring and structured e-mentoring programs, focusing on large-scale e-mentoring programs that addressed issues of social…

The use of Graphic User Interface for development of a user-friendly CRS-Stack software

NASA Astrophysics Data System (ADS)

Sule, Rachmat; Prayudhatama, Dythia; Perkasa, Muhammad D.; Hendriyana, Andri; Fatkhan; Sardjito; Adriansyah

2017-04-01

The development of a user-friendly Common Reflection Surface (CRS) Stack software that has been built by implementing Graphical User Interface (GUI) is described in this paper. The original CRS-Stack software developed by WIT Consortium is compiled in the unix/linux environment, which is not a user-friendly software, so that a user must write the commands and parameters manually in a script file. Due to this limitation, the CRS-Stack become a non popular method, although applying this method is actually a promising way in order to obtain better seismic sections, which have better reflector continuity and S/N ratio. After obtaining successful results that have been tested by using several seismic data belong to oil companies in Indonesia, it comes to an idea to develop a user-friendly software in our own laboratory. Graphical User Interface (GUI) is a type of user interface that allows people to interact with computer programs in a better way. Rather than typing commands and module parameters, GUI allows the users to use computer programs in much simple and easy. Thus, GUI can transform the text-based interface into graphical icons and visual indicators. The use of complicated seismic unix shell script can be avoided. The Java Swing GUI library is used to develop this CRS-Stack GUI. Every shell script that represents each seismic process is invoked from Java environment. Besides developing interactive GUI to perform CRS-Stack processing, this CRS-Stack GUI is design to help geophysicists to manage a project with complex seismic processing procedures. The CRS-Stack GUI software is composed by input directory, operators, and output directory, which are defined as a seismic data processing workflow. The CRS-Stack processing workflow involves four steps; i.e. automatic CMP stack, initial CRS-Stack, optimized CRS-Stack, and CRS-Stack Supergather. Those operations are visualized in an informative flowchart with self explanatory system to guide the user inputting the parameter values for each operation. The knowledge of CRS-Stack processing procedure is still preserved in the software, which is easy and efficient to be learned. The software will still be developed in the future. Any new innovative seismic processing workflow will also be added into this GUI software.

Development and validation of a general purpose linearization program for rigid aircraft models

NASA Technical Reports Server (NTRS)

Duke, E. L.; Antoniewicz, R. F.

1985-01-01

A FORTRAN program that provides the user with a powerful and flexible tool for the linearization of aircraft models is discussed. The program LINEAR numerically determines a linear systems model using nonlinear equations of motion and a user-supplied, nonlinear aerodynamic model. The system model determined by LINEAR consists of matrices for both the state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model. Also, included in the report is a comparison of linear and nonlinear models for a high performance aircraft.

NASA's Radioisotope Power Systems Program Overview - A Focus on RPS Users

NASA Technical Reports Server (NTRS)

Hamley, John A.; McCallum, Peter W.; Sandifer, Carl E., II; Sutliff, Thomas J.; Zakrajsek, June F.

2016-01-01

The goal of NASA's Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet potential future mission needs. To meet this goal, the RPS Program manages investments in RPS technologies and RPS system development, working closely with the Department of Energy. This paper provides an overview of the RPS Program content and status, its collaborations with potential RPS users, and the approach employed to maintain the readiness of RPS to support future NASA mission concepts.

User documentation for the FHWA Carpool Matching Program (second edition)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1975-01-01

This document provides persons interested in computerized carpool/buspool matching programs a complete description of the user documentation for the FHWA Carpool Matching Program. The FHWA program is written in American National Standard COBOL and thus should be readily transferable to environments other than the IBM 360/65 (OS) under which it has been developed and tested. The program has a compiled time core requirement of 110K and a maximum execution time core requirement of 110K. While considerable effort has been made to test the program in several applications and to achieve accuracy and completeness in the program and supporting documentation, themore » FHWA cannot guarantee the proper operation of this program by any user nor can it assume liability for any damage, loss, or inconvenience resulting from the operation of this program or the results obtained thereby. This present version of the carpool matching program represents the latest version of the first generation of an ongoing multi-phase process of improvements and refinements. The ultimate goal is an effective carpool and transit information system that will produce individualized information covering not only carpooling opportunities, but also transit routing, scheduling, and other identifying information for the commuter. (MCW)« less

The FITS model office ergonomics program: a model for best practice.

PubMed

Chim, Justine M Y

2014-01-01

An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

Computer program for nonlinear static stress analysis of shuttle thermal protection system: User's manual

NASA Technical Reports Server (NTRS)

Giles, G. L.; Wallas, M.

1981-01-01

User documentation is presented for a computer program which considers the nonlinear properties of the strain isolator pad (SIP) in the static stress analysis of the shuttle thermal protection system. This program is generalized to handle an arbitrary SIP footprint including cutouts for instrumentation and filler bar. Multiple SIP surfaces are defined to model tiles in unique locations such as leading edges, intersections, and penetrations. The nonlinearity of the SIP is characterized by experimental stress displacement data for both normal and shear behavior. Stresses in the SIP are calculated using a Newton iteration procedure to determine the six rigid body displacements of the tile which develop reaction forces in the SIP to equilibrate the externally applied loads. This user documentation gives an overview of the analysis capabilities, a detailed description of required input data and an example to illustrate use of the program.

X based interactive computer graphics applications for aerodynamic design and education

NASA Technical Reports Server (NTRS)

Benson, Thomas J.; Higgs, C. Fred, III

1995-01-01

Six computer applications packages have been developed to solve a variety of aerodynamic problems in an interactive environment on a single workstation. The packages perform classical one dimensional analysis under the control of a graphical user interface and can be used for preliminary design or educational purposes. The programs were originally developed on a Silicon Graphics workstation and used the GL version of the FORMS library as the graphical user interface. These programs have recently been converted to the XFORMS library of X based graphics widgets and have been tested on SGI, IBM, Sun, HP and PC-Lunix computers. The paper will show results from the new VU-DUCT program as a prime example. VU-DUCT has been developed as an educational package for the study of subsonic open and closed loop wind tunnels.

ITS Early Deployment Study, Richmond/ Tri-Cities Area, User Service Plan

DOT National Transportation Integrated Search

1996-05-01

">THE ESSENCE OF THE ITS PLANNING PROCESS IS TO DEVELOP EACH ITS PROGRAM ON THE BASIS OF THE NEEDS OF THE USERS AND OPERATORS OF THE TRANSPORTATION FACILITIES. ALTHOUGH THE PROCESS IS THE SAME NATIONWIDE, THE RESULTS ARE CUSTOMIZED IN EACH COMMUNITY ...

Financing geriatric programs in community health centers.

PubMed Central

Yeatts, D E; Ray, S; List, N; Duggar, B

1991-01-01

There are approximately 600 Community and Migrant Health Centers (C/MHCs) providing preventive and primary health care services principally to medically underserved rural and urban areas across the United States. The need to develop geriatric programs within C/MHCs is clear. Less clear is how and under what circumstances a comprehensive geriatric program can be adequately financed. The Health Resources and Services Administration of the Public Health Service contracted with La Jolla Management Corporation and Duke University Center on Aging to identify successful techniques for obtaining funding by examining 10 "good practice" C/MHC geriatric programs. The results from this study indicated that effective techniques included using a variety of funding sources, maintaining accurate cost-per-user information, developing a marketing strategy and user incentives, collaborating with the area agency on aging and other community organizations, and developing special services for the elderly. Developing cost-per-user information allowed for identifying appropriate "drawing card" services, negotiating sound reimbursement rates and contracts with other providers, and assessing the financial impact of changing service mixes. A marketing strategy was used to enhance the ability of the centers to provide a comprehensive package of services. Collaboration with the area agency on aging and other community organizations and volunteers in the aging network was found to help establish referral networks and subsequently increase the number of elderly patients served. Finally, development of special services for the elderly, such as adult day care, case management, and health education, was found to increase program visibility, opportunities to work with the network of services for the aging, and clinical utilization. PMID:1908588

Parallelization of NAS Benchmarks for Shared Memory Multiprocessors

NASA Technical Reports Server (NTRS)

Waheed, Abdul; Yan, Jerry C.; Saini, Subhash (Technical Monitor)

1998-01-01

This paper presents our experiences of parallelizing the sequential implementation of NAS benchmarks using compiler directives on SGI Origin2000 distributed shared memory (DSM) system. Porting existing applications to new high performance parallel and distributed computing platforms is a challenging task. Ideally, a user develops a sequential version of the application, leaving the task of porting to new generations of high performance computing systems to parallelization tools and compilers. Due to the simplicity of programming shared-memory multiprocessors, compiler developers have provided various facilities to allow the users to exploit parallelism. Native compilers on SGI Origin2000 support multiprocessing directives to allow users to exploit loop-level parallelism in their programs. Additionally, supporting tools can accomplish this process automatically and present the results of parallelization to the users. We experimented with these compiler directives and supporting tools by parallelizing sequential implementation of NAS benchmarks. Results reported in this paper indicate that with minimal effort, the performance gain is comparable with the hand-parallelized, carefully optimized, message-passing implementations of the same benchmarks.

Web-Based Intervention to Reduce Substance Abuse and Depressive Symptoms in Mexico: Development and Usability Test.

PubMed

Tiburcio, Marcela; Lara, Ma Asunción; Aguilar Abrego, Araceli; Fernández, Morise; Martínez Vélez, Nora; Sánchez, Alejandro

2016-09-29

The development of Web-based interventions for substance abuse in Latin America is a new field of interest with great potential for expansion to other Spanish-speaking countries. This paper describes a project aimed to develop and evaluate the usability of the Web-based Help Program for Drug Abuse and Depression (Programa de Ayuda para Abuso de Drogas y Depresión, PAADD, in Spanish) and also to construct a systematic frame of reference for the development of future Web-based programs. The PAADD aims to reduce substance use and depressive symptoms with cognitive behavioral techniques translated into Web applications, aided by the participation of a counselor to provide support and guidance. This Web-based intervention includes 4 steps: (1) My Starting Point, (2) Where Do I Want to Be? (3) Strategies for Change, and (4) Maintaining Change. The development of the program was an interactive multistage process. The first stage defined the core structure and contents, which were validated in stage 2 by a group of 8 experts in addiction treatment. Programming of the applications took place in stage 3, taking into account 3 types of end users: administrators, counselors, and substance users. Stage 4 consisted of functionality testing. In stage 5, a total of 9 health professionals and 20 drug users currently in treatment voluntarily interacted with the program in a usability test, providing feedback about adjustments needed to improve users' experience. The main finding of stage 2 was the consensus of the health professionals about the cognitive behavioral strategies and techniques included in PAADD being appropriate for changing substance use behaviors. In stage 5, the health professionals found the functionalities easy to learn; their suggestions were related to the page layout, inclusion of confirmation messages at the end of activities, avoiding "read more" links, and providing feedback about every activity. On the other hand, the users said the information presented within the modules was easy to follow and suggested more dynamic features with concrete instructions and feedback. The resulting Web-based program may have advantages over traditional face-to-face therapies owing to its low cost, wide accessibility, anonymity, and independence of time and distance factors. The detailed description of the process of designing a Web-based program is an important contribution to others interested in this field. The potential benefits must be verified in specific studies. International Standard Randomized Controlled Trial Number (ISRCTN): 25429892; http://www.controlled-trials.com/ISRCTN25429892 (Archived by WebCite at http://www.webcitation.org/6ko1Fsvym).

A Software Engineering Paradigm for Quick-turnaround Earth Science Data Projects

NASA Astrophysics Data System (ADS)

Moore, K.

2016-12-01

As is generally the case with applied sciences professional and educational programs, the participants of such programs can come from a variety of technical backgrounds. In the NASA DEVELOP National Program, the participants constitute an interdisciplinary set of backgrounds, with varying levels of experience with computer programming. DEVELOP makes use of geographically explicit data sets, and it is necessary to use geographic information systems and geospatial image processing environments. As data sets cover longer time spans and include more complex sets of parameters, automation is becoming an increasingly prevalent feature. Though platforms such as ArcGIS, ERDAS Imagine, and ENVI facilitate the batch-processing of geospatial imagery, these environments are naturally constricting to the user in that they limit him or her to the tools that are available. Users must then turn to "homemade" scripting in more traditional programming languages such as Python, JavaScript, or R, to automate workflows. However, in the context of quick-turnaround projects like those in DEVELOP, the programming learning curve may be prohibitively steep. In this work, we consider how to best design a software development paradigm that addresses two major constants: an arbitrarily experienced programmer and quick-turnaround project timelines.

Stated choice models for predicting the impact of user fees at public recreation sites

Treesearch

Herbert W. Schroeder; Jordan Louviere

1999-01-01

A crucial question in the implementation of fee programs is how the users of recreation sites will respond to various levels and types of fees. Stated choice models can help managers anticipate the impact of user fees on people's choices among the alternative recreation sites available to them. Models developed for both day and overnight trips to several areas and...

A revised version of Graphic Normative Analysis Program (GNAP) with examples of petrologic problem solving

USGS Publications Warehouse

Stuckless, J.S.; VanTrump, G.

1979-01-01

A revised version of Graphic Normative Analysis Program (GNAP) has been developed to allow maximum flexibility in the evaluation of chemical data by the occasional computer user. GNAP calculates ClPW norms, Thornton and Tuttle's differentiation index, Barth's cations, Niggli values and values for variables defined by the user. Calculated values can be displayed graphically in X-Y plots or ternary diagrams. Plotting can be done on a line printer or Calcomp plotter with either weight percent or mole percent data. Modifications in the original program give the user some control over normative calculations for each sample. The number of user-defined variables that can be created from the data has been increased from ten to fifteen. Plotting and calculations can be based on the original data, data adjusted to sum to 100 percent, or data adjusted to sum to 100 percent without water. Analyses for which norms were previously not computable are now computed with footnotes that show excesses or deficiencies in oxides (or volatiles) not accounted for by the norm. This report contains a listing of the computer program, an explanation of the use of the program, and the two sample problems.

Gnuastro: GNU Astronomy Utilities

NASA Astrophysics Data System (ADS)

Akhlaghi, Mohammad

2018-01-01

Gnuastro (GNU Astronomy Utilities) manipulates and analyzes astronomical data. It is an official GNU package of a large collection of programs and C/C++ library functions. Command-line programs perform arithmetic operations on images, convert FITS images to common types like JPG or PDF, convolve an image with a given kernel or matching of kernels, perform cosmological calculations, crop parts of large images (possibly in multiple files), manipulate FITS extensions and keywords, and perform statistical operations. In addition, it contains programs to make catalogs from detection maps, add noise, make mock profiles with a variety of radial functions using monte-carlo integration for their centers, match catalogs, and detect objects in an image among many other operations. The command-line programs share the same basic command-line user interface for the comfort of both the users and developers. Gnuastro is written to comply fully with the GNU coding standards and integrates well with all Unix-like operating systems. This enables astronomers to expect a fully familiar experience in the source code, building, installing and command-line user interaction that they have seen in all the other GNU software that they use. Gnuastro's extensive library is included for users who want to build their own unique programs.

External Data and Attribute Hyperlink Programs for Promis*e(Registered Trademark)

NASA Technical Reports Server (NTRS)

Derengowski, Rich; Gruel, Andrew

2001-01-01

External Data and Attribute Hyperlink are computer programs that can be added to Promis*e(trademark) which is a commercial software system that automates routine tasks in the design (including drawing schematic diagrams) of electrical control systems. The programs were developed under the Stennis Space Center's (SSC) Dual Use Technology Development Program to provide capabilities for SSC's BMCS configuration management system which uses Promis*e(trademark). The External Data program enables the storage and management of information in an external database linked to a drawing. Changes can be made either in the database or on the drawing. Information that originates outside Promis*e(trademark) can be stored in custom fields that can be added to the database. Although this information is not available in Promis*e(trademark) printed drawings, it can be associated with symbols in the drawings, and can be retrieved through the drawings when the software is running. The Attribute Hyperlink program enables the addition of hyperlink information as attributes of symbols. This program enables the formation of a direct hyperlink between a schematic diagram and an Internet site or a file on a compact disk, on the user's hard drive, or on another computer on a network to which the user's computer is connected. The user can then obtain information directly related to the part (e.g., maintenance, or troubleshooting information) associated with the hyperlink.

Modernization of the NASA scientific and technical information program

NASA Technical Reports Server (NTRS)

Cotter, Gladys A.; Hunter, Judy F.; Ostergaard, K.

1993-01-01

The NASA Scientific and Technical Information Program utilizes a technology infrastructure assembled in the mid 1960s to late 1970s to process and disseminate its information products. When this infrastructure was developed it placed NASA as a leader in processing STI. The retrieval engine for the STI database was the first of its kind and was used as the basis for developing commercial, other U.S., and foreign government agency retrieval systems. Due to the combination of changes in user requirements and the tremendous increase in technological capabilities readily available in the marketplace, this infrastructure is no longer the most cost-effective or efficient methodology available. Consequently, the NASA STI Program is pursuing a modernization effort that applies new technology to current processes to provide near-term benefits to the user. In conjunction with this activity, we are developing a long-term modernization strategy designed to transition the Program to a multimedia, global 'library without walls.' Critical pieces of the long-term strategy include streamlining access to sources of STI by using advances in computer networking and graphical user interfaces; creating and disseminating technical information in various electronic media including optical disks, video, and full text; and establishing a Technology Focus Group to maintain a current awareness of emerging technology and to plan for the future.

Web Time-Management Tool

NASA Technical Reports Server (NTRS)

2000-01-01

Oak Grove Reactor, developed by Oak Grove Systems, is a new software program that allows users to integrate workflow processes. It can be used with portable communication devices. The software can join e-mail, calendar/scheduling and legacy applications into one interactive system via the web. Priority tasks and due dates are organized and highlighted to keep the user up to date with developments. Reactor works with existing software and few new skills are needed to use it. Using a web browser, a user can can work on something while other users can work on the same procedure or view its status while it is being worked on at another site. The software was developed by the Jet Propulsion Lab and originally put to use at Johnson Space Center.

MUST - An integrated system of support tools for research flight software engineering. [Multipurpose User-oriented Software Technology

NASA Technical Reports Server (NTRS)

Straeter, T. A.; Foudriat, E. C.; Will, R. W.

1977-01-01

The objectives of NASA's MUST (Multipurpose User-oriented Software Technology) program at Langley Research Center are to cut the cost of producing software which effectively utilizes digital systems for flight research. These objectives will be accomplished by providing an integrated system of support software tools for use throughout the research flight software development process. A description of the overall MUST program and its progress toward the release of a first MUST system will be presented. This release includes: a special interactive user interface, a library of subroutines, assemblers, a compiler, automatic documentation tools, and a test and simulation system.

Advances of NOAA Training Program in Climate Services

NASA Astrophysics Data System (ADS)

Timofeyeva, M. M.

2012-12-01

Since 2002, NOAA's National Weather Service (NWS) Climate Services Division (CSD) has offered numerous training opportunities to NWS staff. After eight-years of development, the training program offers three instructor-led courses and roughly 25 online (distance learning) modules covering various climate topics, such as: climate data and observations, climate variability and change, and NWS national / local climate products (tools, skill, and interpretation). Leveraging climate information and expertise available at all NOAA line offices and partners allows for the delivery of the most advanced knowledge and is a very critical aspect of the training program. The emerging NOAA Climate Service (NCS) requires a well-trained, climate-literate workforce at the local level capable of delivering NOAA's climate products and services as well as providing climate-sensitive decision support. NWS Weather Forecast Offices and River Forecast Centers presently serve as local outlets for the NCS climate services. Trained NWS climate service personnel use proactive and reactive approaches and professional education methods in communicating climate variability and change information to local users. Both scientifically-sound messages and amiable communication techniques are important in developing an engaged dialog between the climate service providers and users. Several pilot projects have been conducted by the NWS CSD this past year that apply the program's training lessons and expertise to specialized external user group training. The technical user groups included natural resources managers, engineers, hydrologists, and planners for transportation infrastructure. Training of professional user groups required tailoring instructions to the potential applications for each group of users. Training technical users identified the following critical issues: (1) knowledge of target audience expectations, initial knowledge status, and potential use of climate information; (2) leveraging partnership with climate services providers; and, (3) applying 3H training approach, where the first H stands for Head (trusted science), the second H stands for Heart (make it easy), and the third H for Hand (support with applications).

Advanced space system analysis software. Technical, user, and programmer guide

NASA Technical Reports Server (NTRS)

Farrell, C. E.; Zimbelman, H. F.

1981-01-01

The LASS computer program provides a tool for interactive preliminary and conceptual design of LSS. Eight program modules were developed, including four automated model geometry generators, an associated mass properties module, an appendage synthesizer module, an rf analysis module, and an orbital transfer analysis module. The existing rigid body controls analysis module was modified to permit analysis of effects of solar pressure on orbital performance. A description of each module, user instructions, and programmer information are included.

Fatigue crack growth model RANDOM2 user manual. Appendix 1: Development of advanced methodologies for probabilistic constitutive relationships of material strength models

NASA Technical Reports Server (NTRS)

Boyce, Lola; Lovelace, Thomas B.

1989-01-01

FORTRAN program RANDOM2 is presented in the form of a user's manual. RANDOM2 is based on fracture mechanics using a probabilistic fatigue crack growth model. It predicts the random lifetime of an engine component to reach a given crack size. Details of the theoretical background, input data instructions, and a sample problem illustrating the use of the program are included.

Improved scaling laws for stage inert mass space Propulsion systems. Volume 3: Propulsion synthesis program users and programmers manual

NASA Technical Reports Server (NTRS)

1971-01-01

The analytical models developed for the Space Propulsion Automated Synthesis Modeling (SPASM) program are presented. Weight scaling laws developed during this study are incorporated into the program's scaling data bank. A detail listing, logic diagram and input/output formats are supplied for the SPASM program. Two test examples for one to four-stage vehicles performing different types of missions are shown to demonstrate the program's capability and versatility.

Minimum Hamiltonian ascent trajectory evaluation (MASTRE) program (update to automatic flight trajectory design, performance prediction, and vehicle sizing for support of shuttle and shuttle derived vehicles) users manual

NASA Technical Reports Server (NTRS)

Lyons, J. T.; Borchers, William R.

1993-01-01

Documentation for the User Interface Program for the Minimum Hamiltonian Ascent Trajectory Evaluation (MASTRE) is provided. The User Interface Program is a separate software package designed to ease the user input requirements when using the MASTRE Trajectory Program. This document supplements documentation on the MASTRE Program that consists of the MASTRE Engineering Manual and the MASTRE Programmers Guide. The User Interface Program provides a series of menus and tables using the VAX Screen Management Guideline (SMG) software. These menus and tables allow the user to modify the MASTRE Program input without the need for learning the various program dependent mnemonics. In addition, the User Interface Program allows the user to modify and/or review additional input Namelist and data files, to build and review command files, to formulate and calculate mass properties related data, and to have a plotting capability.

Precise control and animation creation over the DMD for projection-based applications

NASA Astrophysics Data System (ADS)

Koudsi, Badia

2014-03-01

Digital micromirror devices (DMDs) are used in a variety of display and projection applications to produce high resolution images, both static and animated. A common obstacle to working with DMDs in research and development applications is the steep learning curve required to obtain proficiency in programming the boards that control the behavior of the DMDs. This can discourage developers who wish to use DMDs in new or novel research and development applications which might benefit from their light-control properties. A new software package called Light Animator has been developed that provides a user friendly and more intuitive interface for controlling the DMD. The software allows users to address the micromirror array by the drawing and animation of objects in a style similar to that of commercial drawing programs. Sequences and animation are controlled by dividing the sequence into frames which the user can draw individually or the software can fill in for the user. Examples and descriptions of the software operation are described and operational performance measures are provided. Potential applications include 3D volumetric displays, a 3D scanner when combining the DMD with a CCD camera, and most any 2D application for which DMDs are currently used. The software's capabilities allow scientists to develop applications more easily and effectively.

Subsystems component definitions summary program

NASA Technical Reports Server (NTRS)

Scott, A. Don; Thomas, Carolyn C.; Simonsen, Lisa C.; Hall, John B., Jr.

1991-01-01

A computer program, the Subsystems Component Definitions Summary (SUBCOMDEF), was developed to provide a quick and efficient means of summarizing large quantities of subsystems component data in terms of weight, volume, resupply, and power. The program was validated using Space Station Freedom Program Definition Requirements Document data for the internal and external thermal control subsystem. Once all component descriptions, unit weights and volumes, resupply, and power data are input, the user may obtain a summary report of user-specified portions of the subsystem or of the entire subsystem as a whole. Any combination or all of the parameters of wet and dry weight, wet and dry volume, resupply weight and volume, and power may be displayed. The user may vary the resupply period according to individual mission requirements, as well as the number of hours per day power consuming components operate. Uses of this program are not limited only to subsystem component summaries. Any applications that require quick, efficient, and accurate weight, volume, resupply, or power summaries would be well suited to take advantage of SUBCOMDEF's capabilities.

General-Purpose Electronic System Tests Aircraft

NASA Technical Reports Server (NTRS)

Glover, Richard D.

1989-01-01

Versatile digital equipment supports research, development, and maintenance. Extended aircraft interrogation and display system is general-purpose assembly of digital electronic equipment on ground for testing of digital electronic systems on advanced aircraft. Many advanced features, including multiple 16-bit microprocessors, pipeline data-flow architecture, advanced operating system, and resident software-development tools. Basic collection of software includes program for handling many types of data and for displays in various formats. User easily extends basic software library. Hardware and software interfaces to subsystems provided by user designed for flexibility in configuration to meet user's requirements.

Elementary Career Education Activity Resource Guide. A Comprehensive Program of Vocational Education for Career Development: K-University.

ERIC Educational Resources Information Center

Kershaw, James T.

One of nine products developed for a comprehensive program (kindergarten through university level) of vocational education for career development in Florida, this activities manual for elementary school counselors, teachers, and other users contains six federal career education objectives broken down into sub-federal objectives. These six federal…

Development and feasibility of Inlife: A pilot study of an online social support intervention for informal caregivers of people with dementia.

PubMed

Dam, Alieske E H; van Boxtel, Martin P J; Rozendaal, Nico; Verhey, Frans R J; de Vugt, Marjolein E

2017-01-01

Informal caregivers of individuals with dementia have an increased risk to face social isolation due to progression of the disease. Online social media interventions might offer a new opportunity to increase access to social support and enhance positive interactions and openness in dementia care networks. This explorative pilot study describes (1) the development of an online social support intervention Inlife, and (2) the evaluation of the feasibility of this intervention and the measurements to assess its effectiveness. The Medical Research Council (MRC) framework guided the development of the online social support intervention. This is a stepwise approach that integrates potential users' views with the development and validation of the program content. The program was developed by combining (1) individual caregiver interviews (n = 10), (2) focus group sessions with experts and web designers (n = 6), and (3) individual think-aloud tests (n = 2). Subsequently, a pilot study with informal caregivers was conducted (n = 25) to examine the program's feasibility and preliminary effectiveness. Online self-report measures were completed at baseline and at four follow-up time points. In total, 23 participants completed the newly developed Inlife intervention. Despite the high number of low-active users (17/23, 73%), Inlife had a good feasibility score of 7.1 (range: 1-10). The Calendar and Timeline were used most frequently and contributed to better care coordination and positive interactions. Although the Inlife platform received a sufficient feasibility rating, the uptake was not optimal. Therefore, the Inlife platform was adapted to limit the number of low-active users and improve user friendliness. Recommendations for additional treatment adherence were provided. The development according to the MRC framework and the sufficient feasibility rating of Inlife formed the basis for a future effectiveness study.

Evaluation of new multimedia formats for cancer communications.

PubMed

Bader, Judith L; Strickman-Stein, Nancy

2003-01-01

Providing quality, current cancer information to cancer patients and their families is a key function of the National Cancer Institute (NCI) Web site. This information is now provided in predominantly-text format, but could be provided in formats using multimedia, including animation and sound. Since users have many choices about where to get their information, it is important to provide the information in a format that is helpful and that they prefer. To pilot and evaluate multimedia strategies for future cancer-information program formats for lay users, the National Cancer Institute created new multimedia versions of existing text programs. We sought to evaluate user performance and preference on these 3 new formats and on the 2 existing text formats. The National Cancer Institute's "What You Need to Know About Lung Cancer" program was the test vehicle. There were 5 testing sessions, 1 dedicated to each format. Each session lasted about 1 hour, with 9 participants per session and 45 users overall. Users were exposed to the assigned cancer program from beginning to end in 1 of 5 formats: text paperback booklet, paperback booklet formatted in HTML on the Web, spoken audio alone, spoken audio synchronized with a text Web page, and Flash multimedia (animation, spoken audio, and text). Immediately thereafter, the features and design of the 4 alternative formats were demonstrated in detail. A multiple-choice pre-test and post-test quiz on the cancer content was used to assess user learning (performance) before and after experiencing the assigned program. The quiz was administered using an Authorware software interface writing to an Access database. Users were asked to rank from 1 to 5 their preference for the 5 program formats, and provide structured and open-ended comments about usability of the 5 formats. Significant improvement in scores from pre-test to post-test was seen for the total study population. Average scores for users in each of the 5 format groups improved significantly. Increments in improvement, however, were not statistically different between any of the format groups. Significant improvements in quiz scores were seen irrespective of age group or education level. Of the users, 71.1% ranked the Flash program first among the 5 formats, and 84.4% rated Flash as their first or second choice. Audio was the least-preferred format, ranking fifth among 46.7% of users and first among none. Flash was ranked first among users regardless of education level, age group, or format group to which the user was assigned. Under the pilot study conditions, users overwhelmingly preferred the Flash format to the other 4 formats. Learning occurred equally in all formats. Use of multimedia should be considered as communication strategies are developed for updating cancer content and attracting new users.

Evaluation of New Multimedia Formats for Cancer Communications

PubMed Central

Strickman-Stein, Nancy

2003-01-01

Background Providing quality, current cancer information to cancer patients and their families is a key function of the National Cancer Institute (NCI) Web site. This information is now provided in predominantly-text format, but could be provided in formats using multimedia, including animation and sound. Since users have many choices about where to get their information, it is important to provide the information in a format that is helpful and that they prefer. Objective To pilot and evaluate multimedia strategies for future cancer-information program formats for lay users, the National Cancer Institute created new multimedia versions of existing text programs. We sought to evaluate user performance and preference on these 3 new formats and on the 2 existing text formats. Methods The National Cancer Institute's "What You Need to Know About Lung Cancer" program was the test vehicle. There were 5 testing sessions, 1 dedicated to each format. Each session lasted about 1 hour, with 9 participants per session and 45 users overall. Users were exposed to the assigned cancer program from beginning to end in 1 of 5 formats: text paperback booklet, paperback booklet formatted in HTML on the Web, spoken audio alone, spoken audio synchronized with a text Web page, and Flash multimedia (animation, spoken audio, and text). Immediately thereafter, the features and design of the 4 alternative formats were demonstrated in detail. A multiple-choice pre-test and post-test quiz on the cancer content was used to assess user learning (performance) before and after experiencing the assigned program. The quiz was administered using an Authorware software interface writing to an Access database. Users were asked to rank from 1 to 5 their preference for the 5 program formats, and provide structured and open-ended comments about usability of the 5 formats. Results Significant improvement in scores from pre-test to post-test was seen for the total study population. Average scores for users in each of the 5 format groups improved significantly. Increments in improvement, however, were not statistically different between any of the format groups. Significant improvements in quiz scores were seen irrespective of age group or education level. Of the users, 71.1% ranked the Flash program first among the 5 formats, and 84.4% rated Flash as their first or second choice. Audio was the least-preferred format, ranking fifth among 46.7% of users and first among none. Flash was ranked first among users regardless of education level, age group, or format group to which the user was assigned. Conclusions Under the pilot study conditions, users overwhelmingly preferred the Flash format to the other 4 formats. Learning occurred equally in all formats. Use of multimedia should be considered as communication strategies are developed for updating cancer content and attracting new users. PMID:14517107

Managing Underground Storage Tank Data Using dBASE III PLUS.

DTIC Science & Technology

1987-06-01

create a more user friendly environment that will simplify the process of using the UST data. For example, using the Assistant facility a user can delete... for the novice user. Approved for public release; distribution is unlimited. t6 The contents of this report are not to be used for advertising...Al jther ed.lons are Obsolete U11class if iC( %J %. % FOREWORD The programs which this user’s manual documents were developed for the Office of the

Characterization of users of remotely-sensed data in the Alabama coastal zone. [user requirements, surveys - technology utilization

NASA Technical Reports Server (NTRS)

Vittor, B. A. (Editor)

1975-01-01

Federal, State, local, universities and private companies were polled to determine their needs for remote sensing data. A total of 62 users were polled. Poll results are given in tables. A comprehensive research program was developed to satisfy user needs, and is examined for the disciplines of Geology, Water Resources, Archaeology, Geography, and Conservation. An investigation of silt plume discharge from Mobile Bay is also examined. Sample poll forms used in the surveys are shown.

Visual programming for next-generation sequencing data analytics.

PubMed

Milicchio, Franco; Rose, Rebecca; Bian, Jiang; Min, Jae; Prosperi, Mattia

2016-01-01

High-throughput or next-generation sequencing (NGS) technologies have become an established and affordable experimental framework in biological and medical sciences for all basic and translational research. Processing and analyzing NGS data is challenging. NGS data are big, heterogeneous, sparse, and error prone. Although a plethora of tools for NGS data analysis has emerged in the past decade, (i) software development is still lagging behind data generation capabilities, and (ii) there is a 'cultural' gap between the end user and the developer. Generic software template libraries specifically developed for NGS can help in dealing with the former problem, whilst coupling template libraries with visual programming may help with the latter. Here we scrutinize the state-of-the-art low-level software libraries implemented specifically for NGS and graphical tools for NGS analytics. An ideal developing environment for NGS should be modular (with a native library interface), scalable in computational methods (i.e. serial, multithread, distributed), transparent (platform-independent), interoperable (with external software interface), and usable (via an intuitive graphical user interface). These characteristics should facilitate both the run of standardized NGS pipelines and the development of new workflows based on technological advancements or users' needs. We discuss in detail the potential of a computational framework blending generic template programming and visual programming that addresses all of the current limitations. In the long term, a proper, well-developed (although not necessarily unique) software framework will bridge the current gap between data generation and hypothesis testing. This will eventually facilitate the development of novel diagnostic tools embedded in routine healthcare.

Program management model study

NASA Technical Reports Server (NTRS)

Connelly, J. J.; Russell, J. E.; Seline, J. R.; Sumner, N. R., Jr.

1972-01-01

Two models, a system performance model and a program assessment model, have been developed to assist NASA management in the evaluation of development alternatives for the Earth Observations Program. Two computer models were developed and demonstrated on the Goddard Space Flight Center Computer Facility. Procedures have been outlined to guide the user of the models through specific evaluation processes, and the preparation of inputs describing earth observation needs and earth observation technology. These models are intended to assist NASA in increasing the effectiveness of the overall Earth Observation Program by providing a broader view of system and program development alternatives.

User Participation and Participatory Design: Topics in Computing Education.

ERIC Educational Resources Information Center

Kautz, Karlheinz

1996-01-01

Discusses user participation and participatory design in the context of formal education for computing professionals. Topics include the current curriculum debate; mathematical- and engineering-based education; traditional system-development training; and an example of a course program that includes computers and society, and prototyping. (53…

Process compressor technology. Volume 2: TI-59 manual for estimating centrifugal compressor performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lapina, R.P.

1983-01-01

This volume provides the performance-estimating procedures of Volume 1 in the from of calculator programs. Each chapter contains one program and is divided into five parts: the background (which develops the technology and equations); the program description; user instructions; sample problems; and the program listing. More than 25 programs are included.

Investigations into mirror fabrication metrology analysis

NASA Technical Reports Server (NTRS)

Dimmock, John O.

1994-01-01

This final report describes the work performed under this delivery order from June 1993 through August 1994. The scope of work included three distinct tasks in support of the AXAF-I program. The objective of the first task was to perform investigations of the grinding and polishing characteristics of the zerodur material by fabricating several samples. The second task was to continue the development of the integrated optical performance modeling software for AXAF-I. The purpose of third and final task was to develop and update the database of AXAF technical documents for an easy and rapid access. The MSFC optical and metrology shops were relocated from the B-wing of Building 4487 to Room BC 144 of Building 4466 in the beginning of this contract. This included dismantling, packing, and moving the equipment from its old location, and then reassembling it at the new location. A total of 65 zerodur samples, measuring 1 inch x 2 inches x 6 inches were ground and polished to a surface figure of lambda/10 p-v, and a surface finish of 5A rms were fabricated for coating tests. A number of special purpose tools and metal mirrors were also fabricated to support various AXAF-I development activities. In the metrology area, the ZYGO Mark 4 interferometer was relocated and also upgraded with a faster and more powerful processor. Surface metrology work was also performed on the coating samples and other optics using ZYGO interferometer and WYKO profilometer. A number of new features have been added to the GRAZTRACE program to enhance its analysis and modeling capabilities. A number of new commands have been added to the command mode GRAZTRACE program to provide a better control to the user on the program execution and data manipulation. Some commands and parameter entries have been reorganized for a uniform format. The command mode version of the convolution program CONVOLVE has been developed. An on-line help system and a user's manual have also been developed for the benefit of the users. The database of AXAF technical documents continues to progress. The titles, company name, date, and location of over 390 documents have been entered in this database. This database provides both a data search and retrieval function, and a data adding function. These functions allow a user to quickly search the data files for documents or add new information. A detailed user's guide has also been prepared. This user guide includes a document classification guide, a list of abbreviations, and a list of acronyms, which have been used in compiling this database of AXAF-I technical documents.

Advanced crew procedures development techniques: Procedures and performance program description

NASA Technical Reports Server (NTRS)

Arbet, J. D.; Mangiaracina, A. A.

1975-01-01

The Procedures and Performance Program (PPP) for operation in conjunction with the Shuttle Procedures Simulator (SPS) is described. The PPP user interface, the SPS/PPP interface, and the PPP applications software are discussed.

User's Guide for the Interactive Scheduling Program : Preliminary Calendar Version

DOT National Transportation Integrated Search

1978-08-01

The Office of Transportation Management of the Urban Mass Transportation Administration (UMTA), in conjunction with the Transportation Systems Center (TSC), designed and developed the Interactive Scheduling Program (ISP) to assist rail-transit operat...

Crew/computer communications study. Volume 2: Appendixes

NASA Technical Reports Server (NTRS)

Johannes, J. D.

1974-01-01

The software routines developed during the crew/computer communications study are described to provide the user with an understanding of each routine, any restrictions in use, the required input data, and expected results after executing the routines. The combination of routines to generate a crew/computer communications application is also explained. The programmable keyboard and display used by the program is described, and an experiment scenario is provided to illustrate the relationship between the program frames when they are grouped into activity phases. Program descriptions and a user's guide are also presented. For Vol. 1, see N74-18843.

Ada Namelist Package

NASA Technical Reports Server (NTRS)

Klumpp, Allan R.

1991-01-01

Ada Namelist Package, developed for Ada programming language, enables calling program to read and write FORTRAN-style namelist files. Features are: handling of any combination of types defined by user; ability to read vectors, matrices, and slices of vectors and matrices; handling of mismatches between variables in namelist file and those in programmed list of namelist variables; and ability to avoid searching entire input file for each variable. Principle benefits derived by user: ability to read and write namelist-readable files, ability to detect most file errors in initialization phase, and organization keeping number of instantiated units to few packages rather than to many subprograms.

Graphical User Interface Development for Representing Air Flow Patterns

NASA Technical Reports Server (NTRS)

Chaudhary, Nilika

2004-01-01

In the Turbine Branch, scientists carry out experimental and computational work to advance the efficiency and diminish the noise production of jet engine turbines. One way to do this is by decreasing the heat that the turbine blades receive. Most of the experimental work is carried out by taking a single turbine blade and analyzing the air flow patterns around it, because this data indicates the sections of the turbine blade that are getting too hot. Since the cost of doing turbine blade air flow experiments is very high, researchers try to do computational work that fits the experimental data. The goal of computational fluid dynamics is for scientists to find a numerical way to predict the complex flow patterns around different turbine blades without physically having to perform tests or costly experiments. When visualizing flow patterns, scientists need a way to represent the flow conditions around a turbine blade. A researcher will assign specific zones that surround the turbine blade. In a two-dimensional view, the zones are usually quadrilaterals. The next step is to assign boundary conditions which define how the flow enters or exits one side of a zone. way of setting up computational zones and grids, visualizing flow patterns, and storing all the flow conditions in a file on the computer for future computation. Such a program is necessary because the only method for creating flow pattern graphs is by hand, which is tedious and time-consuming. By using a computer program to create the zones and grids, the graph would be faster to make and easier to edit. Basically, the user would run a program that is an editable graph. The user could click and drag with the mouse to form various zones and grids, then edit the locations of these grids, add flow and boundary conditions, and finally save the graph for future use and analysis. My goal this summer is to create a graphical user interface (GUI) that incorporates all of these elements. I am writing the program in Java, a language that is portable among platforms, because it can run on different operating systems such as Windows and Unix without having to be rewritten. I had no prior experience of programming in Java at the start of my internship; I am continuously learning as I create the program. I have written the part of the program that enables a user to draw several zones, edit them, and store their locations. The next phase of my project is to allow the user to click on the side of a zone and create a boundary condition for it. A previous intern wrote a program that allows the user to input boundary conditions. I can integrate the two programs to create a larger, more usable program. After that, I will develop a way for the user to save the graph for future reference. Another eventual goal is to make the GUI capable of creating three-dimensional zones as well. Researchers such as my mentor, Dr. David Ashpis, need a quick, user-friendly

Training NOAA Staff on Effective Communication Methods with Local Climate Users

NASA Astrophysics Data System (ADS)

Timofeyeva, M. M.; Mayes, B.

2011-12-01

Since 2002 NOAA National Weather Service (NWS) Climate Services Division (CSD) offered training opportunities to NWS staff. As a result of eight-year-long development of the training program, NWS offers three training courses and about 25 online distance learning modules covering various climate topics: climate data and observations, climate variability and change, NWS national and local climate products, their tools, skill, and interpretation. Leveraging climate information and expertise available at all NOAA line offices and partners allows delivery of the most advanced knowledge and is a very critical aspect of the training program. NWS challenges in providing local climate services includes effective communication techniques on provide highly technical scientific information to local users. Addressing this challenge requires well trained, climate-literate workforce at local level capable of communicating the NOAA climate products and services as well as provide climate-sensitive decision support. Trained NWS climate service personnel use proactive and reactive approaches and professional education methods in communicating climate variability and change information to local users. Both scientifically-unimpaired messages and amiable communication techniques such as story telling approach are important in developing an engaged dialog between the climate service providers and users. Several pilot projects NWS CSD conducted in the past year applied the NWS climate services training program to training events for NOAA technical user groups. The technical user groups included natural resources managers, engineers, hydrologists, and planners for transportation infrastructure. Training of professional user groups required tailoring the instructions to the potential applications of each group of users. Training technical user identified the following critical issues: (1) Knowledge of target audience expectations, initial knowledge status, and potential use of climate information; (2) Leveraging partnership with climate services providers; and, (3) Applying 3H training approach, where the first H stands for Head (trusted science), the second H stands for Heart (make it easy), and the third H for Hand (support with applications).

"Utstein style" spreadsheet and database programs based on Microsoft Excel and Microsoft Access software for CPR data management of in-hospital resuscitation.

PubMed

Adams, Bruce D; Whitlock, Warren L

2004-04-01

In 1997, The American Heart Association in association with representatives of the International Committee on Resuscitation (ILCOR) published recommended guidelines for reviewing, reporting and conducting in-hospital cardiopulmonary resuscitation (CPR) outcomes using the "Utstein style". Using these guidelines, we developed two Microsoft Office based database management programs that may be useful to the resuscitation community. We developed a user-friendly spreadsheet based on MS Office Excel. The user enters patient variables such as name, age, and diagnosis. Then, event resuscitation variables such as time of collapse and CPR team arrival are entered from a "code flow sheet". Finally, outcome variables such as patient condition at different time points are recorded. The program then makes automatic calculations of average response times, survival rates and other important outcome measurements. Also using the Utstein style, we developed a database program based on MS Office Access. To promote free public access to these programs, we established at a website. These programs will help hospitals track, analyze, and present their CPR outcomes data. Clinical CPR researchers might also find the programs useful because they are easily modified and have statistical functions.

Code Usage Analysis System (CUAS)

NASA Technical Reports Server (NTRS)

Horsley, P. H.; Oliver, J. D.

1976-01-01

A set of computer programs is offered to aid a user in evaluating performance of an application program. The system provides reports of subroutine usage, program errors, and segment loading which occurred during the execution of an application program. It is presented in support of the development and validation of the space vehicle dynamics project.

User preferences for a text message-based smoking cessation intervention.

PubMed

Bock, Beth C; Heron, Kristin E; Jennings, Ernestine G; Magee, Joshua C; Morrow, Kathleen M

2013-04-01

Younger adults are more likely to smoke and less likely to seek treatment than older smokers. They are also frequent users of communication technology. In the current study, we conducted focus groups to obtain feedback about preferences for a text message-based smoking cessation program from potential users. Participants (N = 21, M age = 25.6 years, age range = 20-33 years) were current or recently quit smokers (M cigarettes/day = 12.8) who used text messaging. Participants completed questionnaires and participated in a 2-hour focus group. Focus groups were conducted using an a priori semistructured interview guide to promote discussion of the content and functionality of the intervention. Major themes from analysis of the focus groups included support for the acceptability of a text-based cessation program, suggestions for a more technologically broad-based program, and adjustments to the program structure. Participants recommended including social networking functions, user control of program output through an online profile, and text message features to promote interaction with the system. Interestingly, many participants suggested the program should begin on individuals' identified quit day, challenging the procedures used in most cessation programs, which begin by preparing participants for a future quit date. Overall, younger adult smokers appear to be interested in participating in a smoking cessation program that uses text messages and web-based elements. Qualitative feedback regarding the perceived optimal features and structure of a technology-based intervention challenged traditional methods of implementing smoking cessation interventions and will inform the development of future programs.

Managing a Safe and Successful Multi-User Spaceport

NASA Technical Reports Server (NTRS)

Dacko, Taylor; Ketterer, Kirk; Meade, Phillip

2016-01-01

Encouraged by the creation of the Office of Commercial Space Transportation within the U.S. Federal Aviation Administration (FAA) in 1984 and the Commercial Space Act of 1998, the National Aeronautics and Space Administration (NASA) now relies on an extensive network of support from commercial companies and organizations. At NASA's Kennedy Space Center (KSC), this collaboration opens competitive opportunities for launch providers, including repurposing underutilized Shuttle Program resources, constructing new facilities, and utilizing center services and laboratories. The resulting multi-user spaceport fosters diverse activity, though it engenders risk from hazards associated with various spaceflight processing activities. The KSC Safety & Mission Assurance (S&MA) Directorate, in coordination with the center's Spaceport Integration and Center Planning & Development organizations, has developed a novel approach to protect NASA's workforce, critical assets, and the public from hazardous, space-related activity associated with KSC's multi-user spaceport. For NASA KSC S&MA, the transformation to a multi-user spaceport required implementing methods to foster safe and successful commercial activity while resolving challenges involving: Retirement of the Space Shuttle program; Co-location of multiple NASA programs; Relationships between the NASA programs; Complex relationships between NASA programs and commercial partner operations in exclusive-use facilities; Complex relationships between NASA programs and commercial partner operations in shared-use facilities. NASA KSC S&MA challenges were met with long-term planning and solutions involving cooperation with the Spaceport Integration and Services Directorate. This directorate is responsible for managing active commercial partnerships with customer advocacy and services management, providing a dedicated and consistent level of support to a wide array of commercial operations. This paper explores these solutions, their relevance to the current commercial space industry, and the challenges that continue to drive improvement with a focus on areas of safety management and risk assessment that have been crucial in KSC's evolution into a multi-user spaceport. These solutions may be useful to government entities and private companies looking to partner with the commercial space industry.

International epidemiology of HIV and AIDS among injecting drug users.

PubMed

Des Jarlais, D C; Friedman, S R; Choopanya, K; Vanichseni, S; Ward, T P

1992-10-01

HIV/AIDS and iv drug use (IVDU) are of significant multinational scope and growing. Supporting increased IVDU in many countries are countries' geographical proximity to illicit drug trafficking distribution routes, law enforcement efforts which increase the demand for more efficient drug distribution and consumption, and countries' infrastructural and social modernization. Given the failures of intensified law enforcement efforts to thwart the use and proliferation of illegal drugs, countries with substantial IVDU should look away from preventing use to preventing HIV transmission within drug user populations. With HIV seroprevalence rates rapidly reaching 40-50% in some developing country IVDU groups, a variety of prevention programs is warranted. Such programs should be supported and implemented while prevention remains feasible. This paper examines the variation in HIV seroprevalence among IVD users, rapid HIV spread among users, HIV among IVDUs in Bangkok, emerging issues in HIV transmission among IVDUs, non-AIDS manifestations of HIV infection among IVDUs, prevention programs and effectiveness, and harm reduction.

Earthquake risk reduction in the United States: An assessment of selected user needs and recommendations for the National Earthquake Hazards Reduction Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-12-31

This Assessment was conducted to improve the National Earthquake Hazards Reduction Program (NEHRP) by providing NEHRP agencies with information that supports their user-oriented setting of crosscutting priorities in the NEHRP strategic planning process. The primary objective of this Assessment was to take a ``snapshot`` evaluation of the needs of selected users throughout the major program elements of NEHRP. Secondary objectives were to conduct an assessment of the knowledge that exists (or is being developed by NEHRP) to support earthquake risk reduction, and to begin a process of evaluating how NEHRP is meeting user needs. An identification of NEHRP`s strengths alsomore » resulted from the effort, since those strengths demonstrate successful methods that may be useful to NEHRP in the future. These strengths are identified in the text, and many of them represent important achievements since the Earthquake Hazards Reduction Act was passed in 1977.« less

Modelling parallel programs and multiprocessor architectures with AXE

NASA Technical Reports Server (NTRS)

Yan, Jerry C.; Fineman, Charles E.

1991-01-01

AXE, An Experimental Environment for Parallel Systems, was designed to model and simulate for parallel systems at the process level. It provides an integrated environment for specifying computation models, multiprocessor architectures, data collection, and performance visualization. AXE is being used at NASA-Ames for developing resource management strategies, parallel problem formulation, multiprocessor architectures, and operating system issues related to the High Performance Computing and Communications Program. AXE's simple, structured user-interface enables the user to model parallel programs and machines precisely and efficiently. Its quick turn-around time keeps the user interested and productive. AXE models multicomputers. The user may easily modify various architectural parameters including the number of sites, connection topologies, and overhead for operating system activities. Parallel computations in AXE are represented as collections of autonomous computing objects known as players. Their use and behavior is described. Performance data of the multiprocessor model can be observed on a color screen. These include CPU and message routing bottlenecks, and the dynamic status of the software.

Discovery and New Frontiers Project Budget Analysis Tool

NASA Technical Reports Server (NTRS)

Newhouse, Marilyn E.

2011-01-01

The Discovery and New Frontiers (D&NF) programs are multi-project, uncoupled programs that currently comprise 13 missions in phases A through F. The ability to fly frequent science missions to explore the solar system is the primary measure of program success. The program office uses a Budget Analysis Tool to perform "what-if" analyses and compare mission scenarios to the current program budget, and rapidly forecast the programs ability to meet their launch rate requirements. The tool allows the user to specify the total mission cost (fixed year), mission development and operations profile by phase (percent total mission cost and duration), launch vehicle, and launch date for multiple missions. The tool automatically applies inflation and rolls up the total program costs (in real year dollars) for comparison against available program budget. Thus, the tool allows the user to rapidly and easily explore a variety of launch rates and analyze the effect of changes in future mission or launch vehicle costs, the differing development profiles or operational durations of a future mission, or a replan of a current mission on the overall program budget. Because the tool also reports average monthly costs for the specified mission profile, the development or operations cost profile can easily be validate against program experience for similar missions. While specifically designed for predicting overall program budgets for programs that develop and operate multiple missions concurrently, the basic concept of the tool (rolling up multiple, independently-budget lines) could easily be adapted to other applications.

Stirling Powered Van Progam overview

NASA Technical Reports Server (NTRS)

Shaltens, R. K.

1986-01-01

The Stirling Powered Van Program (SPVP) is a multiyear, multiphase program to evaluate the automotive Stirling engine (ASE) in Air Force vans under realistic conditions. The objective of the SPVP is to transfer to manufacturer and end user(s) (i.e., on the path to commercialization) the second-generation Mod 2 ASE upon completion of the Automotive Stirling Engine Program in 1987. In order to meet this objective, the SPVP must establish Stirling performance, integrity, reliability, durability and maintainability. The ASE program background leading to the van program is reviewed and plans for evaluating the kinematic Stirling engine in Air Force vans examined. Also discussed are the NASA technology transfers to industry that have been accomplished and those which are currently being developed.

Information Literacy for Users at the National Medical Library of Cuba: Cochrane Library Course for the Search of Best Evidence for Clinical Decisions

ERIC Educational Resources Information Center

Santana Arroyo, Sonia; del Carmen Gonzalez Rivero, Maria

2012-01-01

The National Medical Library of Cuba is currently developing an information literacy program to train users in the use of biomedical databases. This paper describes the experience with the course "Cochrane Library: Evidence-Based Medicine," which aims to teach users how to make the best use of this database, as well as the evidence-based…

The NASA NASTRAN structural analysis computer program - New content

NASA Technical Reports Server (NTRS)

Weidman, D. J.

1978-01-01

Capabilities of a NASA-developed structural analysis computer program, NASTRAN, are evaluated with reference to finite-element modelling. Applications include the automotive industry as well as aerospace. It is noted that the range of sub-programs within NASTRAN has expanded, while keeping user cost low.

Computer animation of NASTRAN displacements on IRIS 4D-series workstations: CANDI/ANIMATE postprocessing of NASHUA results

NASA Technical Reports Server (NTRS)

Fales, Janine L.

1991-01-01

The capabilities of the postprocessing program CANDI (Color Animation of Nastran DIsplacements) were expanded to accept results from axisymmetric analysis. An auxiliary program, ANIMATE, was developed to allow color display of CANDI output on the IRIS 4D-series workstations. The user can interactively manipulate the graphics display by three-dimensional rotations, translations, and scaling through the use of the keyboard and/or dials box. The user can also specify what portion of the model is displayed. These developments are limited to the display of complex displacements calculated with the NASHUA/NASTRAN procedure for structural acoustics analysis.

A general UNIX interface for biocomputing and network information retrieval software.

PubMed

Kiong, B K; Tan, T W

1993-10-01

We describe a UNIX program, HYBROW, which can integrate without modification a wide range of UNIX biocomputing and network information retrieval software. HYBROW works in conjunction with a separate set of ASCII files containing embedded hypertext-like links. The program operates like a hypertext browser featuring five basic links: file link, execute-only link, execute-display link, directory-browse link and field-filling link. Useful features of the interface may be developed using combinations of these links with simple shell scripts and examples of these are briefly described. The system manager who supports biocomputing users should find the program easy to maintain, and useful in assisting new and infrequent users; it is also simple to incorporate new programs. Moreover, the individual user can customize the interface, create dynamic menus, hypertext a document, invoke shell scripts and new programs simply with a basic understanding of the UNIX operating system and any text editor. This program was written in C language and uses the UNIX curses and termcap libraries. It is freely available as a tar compressed file (by anonymous FTP from nuscc.nus.sg).

PCDAQ, A Windows Based DAQ System

NASA Astrophysics Data System (ADS)

Hogan, Gary

1998-10-01

PCDAQ is a Windows NT based general DAQ/Analysis/Monte Carlo shell developed as part of the Proton Radiography project at LANL (Los Alamos National Laboratory). It has been adopted by experiments outside of the Proton Radiography project at Brookhaven National Laboratory (BNL) and at LANL. The program provides DAQ, Monte Carlo, and replay (disk file input) modes. Data can be read from hardware (CAMAC) or other programs (ActiveX servers). Future versions will read VME. User supplied data analysis routines can be written in Fortran, C++, or Visual Basic. Histogramming, testing, and plotting packages are provided. Histogram data can be exported to spreadsheets or analyzed in user supplied programs. Plots can be copied and pasted as bitmap objects into other Windows programs or printed. A text database keyed by the run number is provided. Extensive software control flags are provided so that the user can control the flow of data through the program. Control flags can be set either in script command files or interactively. The program can be remotely controlled and data accessed over the Internet through its ActiveX DCOM interface.

Declarative Programming with Temporal Constraints, in the Language CG.

PubMed

Negreanu, Lorina

2015-01-01

Specifying and interpreting temporal constraints are key elements of knowledge representation and reasoning, with applications in temporal databases, agent programming, and ambient intelligence. We present and formally characterize the language CG, which tackles this issue. In CG, users are able to develop time-dependent programs, in a flexible and straightforward manner. Such programs can, in turn, be coupled with evolving environments, thus empowering users to control the environment's evolution. CG relies on a structure for storing temporal information, together with a dedicated query mechanism. Hence, we explore the computational complexity of our query satisfaction problem. We discuss previous implementation attempts of CG and introduce a novel prototype which relies on logic programming. Finally, we address the issue of consistency and correctness of CG program execution, using the Event-B modeling approach.

Survey of users of earth resources remote sensing data

NASA Technical Reports Server (NTRS)

Wukelic, G. E.; Stephan, J. G.; Smail, H. E.; Landis, L.; Ebbert, T. F.

1976-01-01

A user survey was conducted to determine current earth resources survey (ERS) data use/user status and recommendations for strengthening use. Only high-altitude aircraft and satellite (primarily LANDSAT) data were included. Emphasis was placed on the private sector/industrial user. Objectives of the survey included: who is using ERS data, how they are using the data, the relative value of current data use as well as obtaining user views as to possible ways of strengthening future ERS data use. The survey results are documented and should provide relevant decision making information for developing future programs of maximum benefit to all end users of satellite ERS data.

Informing Extension Program Development through Audience Segmentation: Targeting High Water Users

ERIC Educational Resources Information Center

Huang, Pei-wen; Lamm, Alexa J.; Dukes, Michael D.

2016-01-01

Human reliance on water has led to water issues globally. Although extension professionals have made efforts successfully to educate the general public about water conservation to enhance water resource sustainability, difficulty has been found in reaching high water users, defined as residents irrigating excessively to their landscape irrigation…

Website Physical Activity Interventions: Preferences of Potential Users

ERIC Educational Resources Information Center

Ferney, Shannon L.; Marshall, Alison L.

2006-01-01

Information and communication technologies (particularly websites and e-mail) have the potential to deliver health behavior change programs to large numbers of adults at low cost. Controlled trials using these new media to promote physical activity have produced mixed results. User-centered development methods can assist in understanding the…

The Graphical User Interface Crisis: Danger and Opportunity.

ERIC Educational Resources Information Center

Boyd, Lawrence H.; And Others

This paper examines graphic computing environments, identifies potential problems in providing access to blind people, and describes programs and strategies being developed to provide this access. The paper begins with an explanation of how graphic user interfaces differ from character-based systems in their use of pixels, visual metaphors such as…

ORBIT: an integrated environment for user-customized bioinformatics tools.

PubMed

Bellgard, M I; Hiew, H L; Hunter, A; Wiebrands, M

1999-10-01

There are a large number of computational programs freely available to bioinformaticians via a client/server, web-based environment. However, the client interface to these tools (typically an html form page) cannot be customized from the client side as it is created by the service provider. The form page is usually generic enough to cater for a wide range of users. However, this implies that a user cannot set as 'default' advanced program parameters on the form or even customize the interface to his/her specific requirements or preferences. Currently, there is a lack of end-user interface environments that can be modified by the user when accessing computer programs available on a remote server running on an intranet or over the Internet. We have implemented a client/server system called ORBIT (Online Researcher's Bioinformatics Interface Tools) where individual clients can have interfaces created and customized to command-line-driven, server-side programs. Thus, Internet-based interfaces can be tailored to a user's specific bioinformatic needs. As interfaces are created on the client machine independent of the server, there can be different interfaces to the same server-side program to cater for different parameter settings. The interface customization is relatively quick (between 10 and 60 min) and all client interfaces are integrated into a single modular environment which will run on any computer platform supporting Java. The system has been developed to allow for a number of future enhancements and features. ORBIT represents an important advance in the way researchers gain access to bioinformatics tools on the Internet.

Cognitive radio based optimal channel sensing and resources allocation

NASA Astrophysics Data System (ADS)

Vijayasarveswari, V.; Khatun, S.; Fakir, M. M.; Nayeem, M. N.; Kamarudin, L. M.; Jakaria, A.

2017-03-01

Cognitive radio (CR) is the latest type of wireless technoloy that is proposed to mitigate spectrum saturation problem. İn cognitve radio, secondary user will use primary user's spectrum during primary user's absence without interupting primary user's transmission. This paper focuses on practical cognitive radio network development process using Android based smart phone for the data transmission. Energy detector based sensing method was proposed and used here because it doesnot require primary user's information. Bluetooth and Wi-fi are the two available types of spectrum that was sensed for CR detection. Simulation showed cognitive radio network can be developed using Android based smart phones. So, a complete application was developed using Java based Android Eclipse program. Finally, the application was uploaded and run on Android based smart phone to form and verify CR network for channel sensing and resource allocation. The observed efficiency of the application was around 81%.

Obtaining and processing Daymet data using Python and ArcGIS

USGS Publications Warehouse

Bohms, Stefanie

2013-01-01

This set of scripts was developed to automate the process of downloading and mosaicking daily Daymet data to a user defined extent using ArcGIS and Python programming language. The three steps are downloading the needed Daymet tiles for the study area extent, converting the netcdf file to a tif raster format, and mosaicking those rasters to one file. The set of scripts is intended for all levels of experience with Python programming language and requires no scripting by the user.

Proceedings: Fourth Parabolic Dish Solar Thermal Power Program Review

NASA Technical Reports Server (NTRS)

1983-01-01

The results of activities within the parabolic dish technology and applications development program are presented. Stirling, organic Rankine and Brayton module technologies, associated hardware and test results to date; concentrator development and progress; economic analyses; and international dish development activities are covered. Two panel discussions, concerning industry issues affecting solar thermal dish development and dish technology from a utility/user perspective, are also included.

Propeller performance and weight predictions appended to the Navy/NASA engine program

NASA Technical Reports Server (NTRS)

Plencner, R. M.; Senty, P.; Wickenheiser, T. J.

1983-01-01

The Navy/NASA Engine Performance (NNEP) is a general purpose computer program currently employed by government, industry and university personnel to simulate the thermodynamic cycles of turbine engines. NNEP is a modular program which has the ability to evaluate the performance of an arbitrary engine configuration defined by the user. In 1979, a program to calculate engine weight (WATE-2) was developed by Boeing's Military Division under NASA contract. This program uses a preliminary design approach to determine engine weights and dimensions. Because the thermodynamic and configuration information required by the weight code was available in NNEP, the weight code was appended to NNEP. Due to increased emphasis on fuel economy, a renewed interest has developed in propellers. This report describes the modifications developed by NASA to both NNEP and WATE-2 to determine the performance, weight and dimensions of propellers and the corresponding gearbox. The propeller performance model has three options, two of which are based on propeller map interpolation. Propeller and gearbox weights are obtained from empirical equations which may easily be modified by the user.

PREVAPORATION PERFORMANCE PREDICTION SOFTWARE

EPA Science Inventory

The Pervaporation, Performance, Prediction Software and Database (PPPS&D) computer software program is currently being developed within the USEPA, NRMRL. The purpose of the PPPS&D program is to educate and assist potential users in identifying opportunities for using pervaporati...

Bridging the Gap - Networking Educators using Real-Time Seismic Data

NASA Astrophysics Data System (ADS)

Ortiz, A. M.; Renwald, M. D.; Baldwin, T. K.; Hall, M. K.

2004-12-01

After nearly a decade, the seismology community has made critical advances in identifying what is effective and what is needed for success in incorporating real-time seismic data in the classroom. Today's K-16 classroom teachers have many options and opportunities for incorporating short- and long-term inquiry activities for monitoring earthquakes and analyzing seismic data in their daily instruction. Through the SpiNet program, we are providing web-based tools that support educators working with real-time seismic data (http://www.scieds.com/spinet/). Our site includes a Recent Seismicity section, which allows users to share seismic data in real-time, and provides near real-time information about global seismicity. Our Activities section provides data and lessons to assist educators who wish to integrate seismology into their classroom. The Research section, currently under development, will allow educators to share general information about how they teach seismology in their classroom through a discussion board and by posting lesson plans. In addition, we are developing a user-friendly tool for students to post results of their research projects. Designing a website which targets a range of users requires a working knowledge of both user needs and website programming and design. User needs include providing a logical navigational structure and accounting for differences in browser functionality, internet access, and users' abilities. Using website development tools, such as PHP, MySQL, RDF feeds, and specialized geoscience applications, we are automating site maintenance; incorporating databases for information storage and retrieval; and providing accessibility for users with a range of skills and physical limitations. By incorporating these features, we have built a dynamic interface for a broad range of users interested in educational seismology.

The Steward Observatory asteroid relational database

NASA Technical Reports Server (NTRS)

Sykes, Mark V.; Alvarezdelcastillo, Elizabeth M.

1991-01-01

The Steward Observatory Asteroid Relational Database (SOARD) was created as a flexible tool for undertaking studies of asteroid populations and sub-populations, to probe the biases intrinsic to asteroid databases, to ascertain the completeness of data pertaining to specific problems, to aid in the development of observational programs, and to develop pedagogical materials. To date, SOARD has compiled an extensive list of data available on asteroids and made it accessible through a single menu-driven database program. Users may obtain tailored lists of asteroid properties for any subset of asteroids or output files which are suitable for plotting spectral data on individual asteroids. The program has online help as well as user and programmer documentation manuals. The SOARD already has provided data to fulfill requests by members of the astronomical community. The SOARD continues to grow as data is added to the database and new features are added to the program.

A multimedia Anatomy Browser incorporating a knowledge base and 3D images.

PubMed Central

Eno, K.; Sundsten, J. W.; Brinkley, J. F.

1991-01-01

We describe a multimedia program for teaching anatomy. The program, called the Anatomy Browser, displays cross-sectional and topographical images, with outlines around structures and regions of interest. The user may point to these structures and retrieve text descriptions, view symbolic relationships between structures, or view spatial relationships by accessing 3-D graphics animations from videodiscs produced specifically for this program. The software also helps students exercise what they have learned by asking them to identify structures by name and location. The program is implemented in a client-server architecture, with the user interface residing on a Macintosh, while images, data, and a growing symbolic knowledge base of anatomy are stored on a fileserver. This architecture allows us to develop practical tutorial modules that are in current use, while at the same time developing the knowledge base that will lead to more intelligent tutorial systems. PMID:1807699

Analysis on laser plasma emission for characterization of colloids by video-based computer program

NASA Astrophysics Data System (ADS)

Putri, Kirana Yuniati; Lumbantoruan, Hendra Damos; Isnaeni

2016-02-01

Laser-induced breakdown detection (LIBD) is a sensitive technique for characterization of colloids with small size and low concentration. There are two types of detection, optical and acoustic. Optical LIBD employs CCD camera to capture the plasma emission and uses the information to quantify the colloids. This technique requires sophisticated technology which is often pricey. In order to build a simple, home-made LIBD system, a dedicated computer program based on MATLAB™ for analyzing laser plasma emission was developed. The analysis was conducted by counting the number of plasma emissions (breakdowns) during a certain period of time. Breakdown probability provided information on colloid size and concentration. Validation experiment showed that the computer program performed well on analyzing the plasma emissions. Optical LIBD has A graphical user interface (GUI) was also developed to make the program more user-friendly.

User's manual for XTRAN2L (version 1.2): A program for solving the general-frequency unsteady transonic small-disturbance equation

NASA Technical Reports Server (NTRS)

Seidel, D. A.; Batina, J. T.

1986-01-01

The development, use and operation of the XTRAN2L program that solves the two dimensional unsteady transonic small disturbance potential equation are described. The XTRAN2L program is used to calculate steady and unsteady transonic flow fields about airfoils and is capable of performing self contained transonic flutter calculations. Operation of the XTRAN2L code is described, and tables defining all input variables, including default values, are presented. Sample cases that use various program options are shown to illustrate operation of XTRAN2L. Computer listings containing input and selected output are included as an aid to the user.

Measuring User Compliance and Cost Effectiveness of Safe Drinking Water Programs: A Cluster-Randomized Study of Household Ultraviolet Disinfection in Rural Mexico.

PubMed

Reygadas, Fermín; Gruber, Joshua S; Dreizler, Lindsay; Nelson, Kara L; Ray, Isha

2018-03-01

Low adoption and compliance levels for household water treatment and safe storage (HWTS) technologies have made it challenging for these systems to achieve measurable health benefits in the developing world. User compliance remains an inconsistently defined and poorly understood feature of HWTS programs. In this article, we develop a comprehensive approach to understanding HWTS compliance. First, our Safe Drinking Water Compliance Framework disaggregates and measures the components of compliance from initial adoption of the HWTS to exclusive consumption of treated water. We apply this framework to an ultraviolet (UV)-based safe water system in a cluster-randomized controlled trial in rural Mexico. Second, we evaluate a no-frills (or "Basic") variant of the program as well as an improved (or "Enhanced") variant, to test if subtle changes in the user interface of HWTS programs could improve compliance. Finally, we perform a full-cost analysis of both variants to assess their cost effectiveness (CE) in achieving compliance. We define "compliance" strictly as the habit of consuming safe water. We find that compliance was significantly higher in the groups where the UV program variants were rolled out than in the control groups. The Enhanced variant performed better immediately postintervention than the Basic, but compliance (and thus CE) degraded with time such that no effective difference remained between the two versions of the program.

e-Stars Template Builder

NASA Technical Reports Server (NTRS)

Cox, Brian

2003-01-01

e-Stars Template Builder is a computer program that implements a concept of enabling users to rapidly gain access to information on projects of NASA's Jet Propulsion Laboratory. The information about a given project is not stored in a data base, but rather, in a network that follows the project as it develops. e-Stars Template Builder resides on a server computer, using Practical Extraction and Reporting Language (PERL) scripts to create what are called "e-STARS node templates," which are software constructs that allow for project-specific configurations. The software resides on the server and does not require specific software on the user machine except for an Internet browser. A user's computer need not be equipped with special software (other than an Internet-browser program). e-Stars Template Builder is compatible with Windows, Macintosh, and UNIX operating systems. A user invokes e-Stars Template Builder from a browser window. Operations that can be performed by the user include the creation of child processes and the addition of links and descriptions of documentation to existing pages or nodes. By means of this addition of "child processes" of nodes, a network that reflects the development of a project is generated.

ALPHACAL: A new user-friendly tool for the calibration of alpha-particle sources.

PubMed

Timón, A Fernández; Vargas, M Jurado; Gallardo, P Álvarez; Sánchez-Oro, J; Peralta, L

2018-05-01

In this work, we present and describe the program ALPHACAL, specifically developed for the calibration of alpha-particle sources. It is therefore more user-friendly and less time-consuming than multipurpose codes developed for a wide range of applications. The program is based on the recently developed code AlfaMC, which simulates specifically the transport of alpha particles. Both cylindrical and point sources mounted on the surface of polished backings can be simulated, as is the convention in experimental measurements of alpha-particle sources. In addition to the efficiency calculation and determination of the backscattering coefficient, some additional tools are available to the user, like the visualization of energy spectrum, use of energy cut-off or low-energy tail corrections. ALPHACAL has been implemented in C++ language using QT library, so it is available for Windows, MacOs and Linux platforms. It is free and can be provided under request to the authors. Copyright © 2018 Elsevier Ltd. All rights reserved.

Physiological approach to optimal stereographic game programming: a technical guide

NASA Astrophysics Data System (ADS)

Martens, William L.; McRuer, Robert; Childs, C. Timothy; Viirree, Erik

1996-04-01

With the advent of mass distribution of consumer VR games comes an imperative to set health and safety standards for the hardware and software used to deliver stereographic content. This is particularly important for game developers who intend to present this stereographic content via head-mounted display (HMD). The visual discomfort that is commonly reported by the user of HMD-based VR games presumably could be kept to a minimum if game developers were provided with standards for the display of stereographic imagery. In this paper, we draw upon both results of research in binocular vision and practical methods from clinical optometry to develop some technical guidelines for programming stereographic games that have the end user's comfort and safety in mind. This paper will provide generate strategies for user- centered implementation of 3D virtual worlds, as well as pictorial examples demonstrating a natural means for rendering stereographic imagery more comfortable to view in games employing first-person perspective.

SRDC Plan of Work: Southern States' Title V Programs, 1978. SRDC Series Publication No. 24.

ERIC Educational Resources Information Center

Southern Rural Development Center, State College, MS.

Moving rural development program and research information to users summarizes the Southern Rural Development Center (SRDC) Plan of Work for 1978. One of 4 regional centers set up by the 1972 Rural Development Act, SRDC coordinates cooperation between research and extension at 28 land-grant institutions in 13 states and Puerto Rico which have rural…

SRDC Plan of Work - Southern States' Title V Programs. SRDC Series Publication No. 22, June 1977.

ERIC Educational Resources Information Center

Southern Rural Development Center, State College, MS.

The Southern Rural Development Center's 1977 plan focuses on ways to move rural development program and research information to the users. One of four regional centers set by the 1972 Rural Development Act, the southern center works with research and extension staffs in 27 land-grant institutions in 13 states and Puerto Rico. Its publication…

Object relations and differential treatment response to methadone maintenance.

PubMed

Nicholson, B; Treece, C

1981-07-01

The authors report results from a psychiatric study of narcotic addicts in which the relationship between specified aspects of object relations development and treatment response to methadone maintenance was examined. Two groups were defined as high and low drug users (in addition to the prescribed methadone dose) depending upon the frequency and intensity of additional drug use; a middle group was excluded. Thirty subjects participated. The dimensions of separation/individuation, narcissistic development, and self and object representations were measured by 12 scaled variables; scores of the high and low drug users were compared by t-test. In all cases, the high use group was found to be more impaired than the low use group. However, the dimensions differed greatly in their ability to differentiate the groups. The strongest group differences were found in the area of narcissistic development, with the high user group significantly more impaired than the low user group. The strength of these findings lends empirical support to the notion that an addict population can be differentiated on diagnostic and ego psychological measures. This has important implications for methadone maintenance treatment programs, and, possibly, for drug programs in general.

A CAI (Computer-Assisted Instruction) Course on Constructing PLANIT lessons: Development, Content, and Evaluation

DTIC Science & Technology

1980-06-01

courseware package on how to program lessons for an automated system. Since PLANIT (Programming Language for Interactive Teaching) is the student/author...assisted instruction (CAI), how to program PLANIT lessons, and to evaluate the effectiveness of the package for select Army users. The resultant courseware

A Structured Model for Software Documentation.

ERIC Educational Resources Information Center

Swigger, Keith

The concept of "structured programming" was developed to facilitate software production, but it has not carried over to documentation design. Two concepts of structure are relevant to user documentation for computer programs. The first is based on programming techniques that emphasize decomposition of tasks into discrete modules, while the second…

DYNALIST II : A Computer Program for Stability and Dynamic Response Analysis of Rail Vehicle Systems : Volume 2. User's Manual.

DOT National Transportation Integrated Search

1975-02-01

A methodology and a computer program, DYNALIST II, have been developed for computing the response of rail vehicle systems to sinusoidal or stationary random rail irregularities. The computer program represents an extension of the earlier DYNALIST pro...

The virtual asthma guideline e-learning program: learning effectiveness and user satisfaction.

PubMed

Kang, Sung-Yoon; Kim, Sae-Hoon; Kwon, Yong-Eun; Kim, Tae-Bum; Park, Hye-Kyung; Park, Heung-Woo; Chang, Yoon-Seok; Jee, Young-Koo; Moon, Hee-Bom; Min, Kyung-Up; Cho, Sang-Heon

2018-05-01

Effective educational tools are important for increasing adherence to asthma guidelines and clinical improvement of asthma patients. We developed a computer-based interactive education program for asthma guideline named the Virtual Learning Center for Asthma Management (VLCAM). We evaluated the usefulness of program in terms of its effects on user awareness of asthma guideline and level of satisfaction. Physicians-in-training at tertiary hospitals in Korea were enrolled in a cross-sectional questionnaire survey. The e-learning program on asthma guideline was conducted over a 2-week period. We investigated changes in the awareness of asthma guideline using 35-item self-administered questionnaire aiming at assessing physicians' knowledge, attitude, and practice. Satisfaction with the program was scored on 4-point Likert scales. A total of 158 physicians-in-training at six tertiary hospitals completed the survey. Compared with baseline, the overall awareness obtained from the scores of knowledge, attitude, and practice was improved significantly. Participants were satisfied with the VLCAM program in the following aspects: helpfulness, convenience, motivation, effectiveness, physicians' confidence, improvement of asthma management, and willingness to recommend. All items in user satisfaction questionnaires received high scores over 3 points. Moreover, the problem-based learning with a virtual patient received the highest user satisfaction among all parts of the program. Our computer-based e-learning program is useful for improving awareness of asthma management. It could improve adherence to asthma guidelines and enhance the quality of asthma care.

Advanced software development workstation: Effectiveness of constraint-checking. [spaceflight simulation and planning

NASA Technical Reports Server (NTRS)

Izygon, Michel

1992-01-01

This report summarizes the findings and lessons learned from the development of an intelligent user interface for a space flight planning simulation program, in the specific area related to constraint-checking. The different functionalities of the Graphical User Interface part and of the rule-based part of the system have been identified. Their respective domain of applicability for error prevention and error checking have been specified.

Microcomputer software development facilities

NASA Technical Reports Server (NTRS)

Gorman, J. S.; Mathiasen, C.

1980-01-01

A more efficient and cost effective method for developing microcomputer software is to utilize a host computer with high-speed peripheral support. Application programs such as cross assemblers, loaders, and simulators are implemented in the host computer for each of the microcomputers for which software development is a requirement. The host computer is configured to operate in a time share mode for multiusers. The remote terminals, printers, and down loading capabilities provided are based on user requirements. With this configuration a user, either local or remote, can use the host computer for microcomputer software development. Once the software is developed (through the code and modular debug stage) it can be downloaded to the development system or emulator in a test area where hardware/software integration functions can proceed. The microcomputer software program sources reside in the host computer and can be edited, assembled, loaded, and then downloaded as required until the software development project has been completed.

Multiple-body simulation with emphasis on integrated Space Shuttle vehicle

NASA Technical Reports Server (NTRS)

Chiu, Ing-Tsau

1993-01-01

The program to obtain intergrid communications - Pegasus - was enhanced to make better use of computing resources. Periodic block tridiagonal and penta-diagonal diagonal routines in OVERFLOW were modified to use a better algorithm to speed up the calculation for grids with periodic boundary conditions. Several programs were added to collar grid tools and a user friendly shell script was developed to help users generate collar grids. User interface for HYPGEN was modified to cope with the changes in HYPGEN. ET/SRB attach hardware grids were added to the computational model for the space shuttle and is currently incorporated into the refined shuttle model jointly developed at Johnson Space Center and Ames Research Center. Flow simulation for the integrated space shuttle vehicle at flight Reynolds number was carried out and compared with flight data as well as the earlier simulation for wind tunnel Reynolds number.

Computational aerodynamics requirements: The future role of the computer and the needs of the aerospace industry

NASA Technical Reports Server (NTRS)

Rubbert, P. E.

1978-01-01

The commercial airplane builder's viewpoint on the important issues involved in the development of improved computational aerodynamics tools such as powerful computers optimized for fluid flow problems is presented. The primary user of computational aerodynamics in a commercial aircraft company is the design engineer who is concerned with solving practical engineering problems. From his viewpoint, the development of program interfaces and pre-and post-processing capability for new computational methods is just as important as the algorithms and machine architecture. As more and more details of the entire flow field are computed, the visibility of the output data becomes a major problem which is then doubled when a design capability is added. The user must be able to see, understand, and interpret the results calculated. Enormous costs are expanded because of the need to work with programs having only primitive user interfaces.

Making Dynamic Digital Maps Cross-Platform and WWW Capable

NASA Astrophysics Data System (ADS)

Condit, C. D.

2001-05-01

High-quality color geologic maps are an invaluable information resource for educators, students and researchers. However, maps with large datasets that include images, or various types of movies, in addition to site locations where analytical data has been collected, are difficult to publish in a format that facilitates their easy access, distribution and use. The development of capable desktop computers and object oriented graphical programming environments has facilitated publication of such data sets in an encapsulated form. The original Dynamic Digital Map (DDM) programs, developed using the Macintosh based SuperCard programming environment, exemplified this approach, in which all data are included in a single package designed so that display and access to the data did not depend on proprietary programs. These DDMs were aimed for ease of use, and allowed data to be displayed by several methods, including point-and-click at icons pin-pointing sample (or image) locations on maps, and from clicklists of sample or site numbers. Each of these DDMs included an overview and automated tour explaining the content organization and program use. This SuperCard development culminated in a "DDM Template", which is a SuperCard shell into which SuperCard users could insert their own content and thus create their own DDMs, following instructions in an accompanying "DDM Cookbook" (URL http://www.geo.umass.edu/faculty/condit/condit2.html). These original SuperCard-based DDMs suffered two critical limitations: a single user platform (Macintosh) and, although they can be downloaded from the web, their use lacked an integration into the WWW. Over the last eight months I have been porting the DDM technology to MetaCard, which is aggressively cross-platform (11 UNIX dialects, WIN32 and Macintosh). The new MetaCard DDM is redesigned to make the maps and images accessible either from CD or the web, using the "LoadNGo" concept. LoadNGo allows the user to download the stand-alone DDM program using a standard browser, and then use the program independently to access images, maps and data with fast web connections. DDMs are intended to be a fast and inexpensive way to publish and make accessible, as an integrated product, high-quality color maps and data sets. They are not a substitute for the analytical capability of GIS; however maps produced using GIS and CAD programs can be easily integrated into DDMs. The preparation of any map product is a time consuming effort. To compliment that effort, the DDM Templates have build into them the capability to contain explanatory text at three different user levels (or perhaps in three different languages), thus one DDM may be used as both a research publication medium and an educational outreach product, with the user choosing which user mode to access the data.

Satisfaction and perceptions of long-term manual wheelchair users with a spinal cord injury upon completion of a locomotor training program with an overground robotic exoskeleton.

PubMed

Gagnon, Dany H; Vermette, Martin; Duclos, Cyril; Aubertin-Leheudre, Mylène; Ahmed, Sara; Kairy, Dahlia

2017-12-19

The main objectives of this study were to quantify clients' satisfaction and perception upon completion of a locomotor training program with an overground robotic exoskeleton. A group of 14 wheelchair users with a spinal cord injury, who finished a 6-8-week locomotor training program with the robotic exoskeleton (18 training sessions), were invited to complete a web-based electronic questionnaire. This questionnaire encompassed 41 statements organized around seven key domains: overall satisfaction related to the training program, satisfaction related to the overground robotic exoskeleton, satisfaction related to the program attributes, perceived learnability, perceived health benefits and risks and perceived motivation to engage in physical activity. Each statement was rated using a visual analogue scale ranging from "0 = totally disagree" to "100 = completely agree". Overall, respondents unanimously considered themselves satisfied with the locomotor training program with the robotic exoskeleton (95.7 ± 0.7%) and provided positive feedback about the robotic exoskeleton itself (82.3 ± 6.9%), the attributes of the locomotor training program (84.5 ± 6.9%) and their ability to learn to perform sit-stand transfers and walk with the robotic exoskeleton (79.6 ± 17%). Respondents perceived some health benefits (67.9 ± 16.7%) and have reported no fear of developing secondary complications or of potential risk for themselves linked to the use of the robotic exoskeleton (16.7 ± 8.2%). At the end of the program, respondents felt motivated to engage in a regular physical activity program (91.3 ± 0.1%). This study provides new insights on satisfaction and perceptions of wheelchair users while also confirming the relevance to continue to improve such technologies, and informing the development of future clinical trials. Implications for Rehabilitation All long-term manual wheelchair users with a spinal cord injury who participated in the study are unanimously satisfied upon completion of a 6-8-week locomotor training program with the robotic exoskeleton and would recommend the program to their peers. All long-term manual wheelchair users with a spinal cord injury who participated in the study offered positive feedback about the robotic exoskeleton itself and feel it is easy to learn to perform sit-stand transfers and walk with the robotic exoskeleton. All long-term manual wheelchair users with a spinal cord injury who participated in the study predominantly perceived improvements in their overall health status, upper limb strength and endurance as well as in their sleep and psychological well-being upon completion of a 6-8-week locomotor training program with the robotic exoskeleton. All long-term manual wheelchair users with a spinal cord injury who participated in the study unanimously felt motivated to engage in a regular physical activity program adapted to their condition and most of them do plan to continue to participate in moderate-to-strenuous physical exercise. Additional research on clients' perspectives, especially satisfaction with the overground exoskeleton and locomotor training program attributes, is needed.

Development of a database system for near-future climate change projections under the Japanese National Project SI-CAT

NASA Astrophysics Data System (ADS)

Nakagawa, Y.; Kawahara, S.; Araki, F.; Matsuoka, D.; Ishikawa, Y.; Fujita, M.; Sugimoto, S.; Okada, Y.; Kawazoe, S.; Watanabe, S.; Ishii, M.; Mizuta, R.; Murata, A.; Kawase, H.

2017-12-01

Analyses of large ensemble data are quite useful in order to produce probabilistic effect projection of climate change. Ensemble data of "+2K future climate simulations" are currently produced by Japanese national project "Social Implementation Program on Climate Change Adaptation Technology (SI-CAT)" as a part of a database for Policy Decision making for Future climate change (d4PDF; Mizuta et al. 2016) produced by Program for Risk Information on Climate Change. Those data consist of global warming simulations and regional downscaling simulations. Considering that those data volumes are too large (a few petabyte) to download to a local computer of users, a user-friendly system is required to search and download data which satisfy requests of the users. We develop "a database system for near-future climate change projections" for providing functions to find necessary data for the users under SI-CAT. The database system for near-future climate change projections mainly consists of a relational database, a data download function and user interface. The relational database using PostgreSQL is a key function among them. Temporally and spatially compressed data are registered on the relational database. As a first step, we develop the relational database for precipitation, temperature and track data of typhoon according to requests by SI-CAT members. The data download function using Open-source Project for a Network Data Access Protocol (OPeNDAP) provides a function to download temporally and spatially extracted data based on search results obtained by the relational database. We also develop the web-based user interface for using the relational database and the data download function. A prototype of the database system for near-future climate change projections are currently in operational test on our local server. The database system for near-future climate change projections will be released on Data Integration and Analysis System Program (DIAS) in fiscal year 2017. Techniques of the database system for near-future climate change projections might be quite useful for simulation and observational data in other research fields. We report current status of development and some case studies of the database system for near-future climate change projections.

COMBIMAN Programs (COMputerized BIomechanical MAN-Model). Version 8 (User’s Guide)

DTIC Science & Technology

1989-02-01

prgrams The guide is based on the program as of January 1989. It deals with the conventions used to develop and analyze crew stations, the generation of the...END ACTION: This is a safety to prevent ending the program if PFK 31 is accidentally depressed. Select END COMBIMAN if you intended to end the program

Gener: a minimal programming module for chemical controllers based on DNA strand displacement

PubMed Central

Kahramanoğulları, Ozan; Cardelli, Luca

2015-01-01

Summary: Gener is a development module for programming chemical controllers based on DNA strand displacement. Gener is developed with the aim of providing a simple interface that minimizes the opportunities for programming errors: Gener allows the user to test the computations of the DNA programs based on a simple two-domain strand displacement algebra, the minimal available so far. The tool allows the user to perform stepwise computations with respect to the rules of the algebra as well as exhaustive search of the computation space with different options for exploration and visualization. Gener can be used in combination with existing tools, and in particular, its programs can be exported to Microsoft Research’s DSD tool as well as to LaTeX. Availability and implementation: Gener is available for download at the Cosbi website at http://www.cosbi.eu/research/prototypes/gener as a windows executable that can be run on Mac OS X and Linux by using Mono. Contact: ozan@cosbi.eu PMID:25957353

Gener: a minimal programming module for chemical controllers based on DNA strand displacement.

PubMed

Kahramanoğulları, Ozan; Cardelli, Luca

2015-09-01

: Gener is a development module for programming chemical controllers based on DNA strand displacement. Gener is developed with the aim of providing a simple interface that minimizes the opportunities for programming errors: Gener allows the user to test the computations of the DNA programs based on a simple two-domain strand displacement algebra, the minimal available so far. The tool allows the user to perform stepwise computations with respect to the rules of the algebra as well as exhaustive search of the computation space with different options for exploration and visualization. Gener can be used in combination with existing tools, and in particular, its programs can be exported to Microsoft Research's DSD tool as well as to LaTeX. Gener is available for download at the Cosbi website at http://www.cosbi.eu/research/prototypes/gener as a windows executable that can be run on Mac OS X and Linux by using Mono. ozan@cosbi.eu. © The Author 2015. Published by Oxford University Press.

Public transportation : New Starts program challenges and preliminary observations on expediting project development.

DOT National Transportation Integrated Search

2009-06-01

The New Starts program is an : important source of new capital : investment in mass transportation. : As required by the Safe, : Accountable, Flexible, Efficient : Transportation Equity Act: A : Legacy for Users, the Federal : Transit Administration ...

Infrastructure for Rapid Development of Java GUI Programs

NASA Technical Reports Server (NTRS)

Jones, Jeremy; Hostetter, Carl F.; Wheeler, Philip

2006-01-01

The Java Application Shell (JAS) is a software framework that accelerates the development of Java graphical-user-interface (GUI) application programs by enabling the reuse of common, proven GUI elements, as distinguished from writing custom code for GUI elements. JAS is a software infrastructure upon which Java interactive application programs and graphical user interfaces (GUIs) for those programs can be built as sets of plug-ins. JAS provides an application- programming interface that is extensible by application-specific plugins that describe and encapsulate both specifications of a GUI and application-specific functionality tied to the specified GUI elements. The desired GUI elements are specified in Extensible Markup Language (XML) descriptions instead of in compiled code. JAS reads and interprets these descriptions, then creates and configures a corresponding GUI from a standard set of generic, reusable GUI elements. These elements are then attached (again, according to the XML descriptions) to application-specific compiled code and scripts. An application program constructed by use of JAS as its core can be extended by writing new plug-ins and replacing existing plug-ins. Thus, JAS solves many problems that Java programmers generally solve anew for each project, thereby reducing development and testing time.

U.S. Air Force Scientific and Technical Information Program - The STINFO Program

NASA Technical Reports Server (NTRS)

Blados, Walter R.

1991-01-01

The U.S. Air Force STINFO (Scientific and Technical Information) program has as its main goal the proper use of all available scientific and technical information in the development of programs. The organization of STINFO databases, the use of STINFO in the development and advancement of aerospace science and technology and the acquisition of superior systems at lowest cost, and the application to public and private sectors of technologies developed for military uses are examined. STINFO user training is addressed. A project for aerospace knowledge diffusion is discussed.

Evaluation of Rankine cycle air conditioning system hardware by computer simulation

NASA Technical Reports Server (NTRS)

Healey, H. M.; Clark, D.

1978-01-01

A computer program for simulating the performance of a variety of solar powered Rankine cycle air conditioning system components (RCACS) has been developed. The computer program models actual equipment by developing performance maps from manufacturers data and is capable of simulating off-design operation of the RCACS components. The program designed to be a subroutine of the Marshall Space Flight Center (MSFC) Solar Energy System Analysis Computer Program 'SOLRAD', is a complete package suitable for use by an occasional computer user in developing performance maps of heating, ventilation and air conditioning components.

INHYD: Computer code for intraply hybrid composite design. A users manual

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Sinclair, J. H.

1983-01-01

A computer program (INHYD) was developed for intraply hybrid composite design. A users manual for INHYD is presented. In INHYD embodies several composite micromechanics theories, intraply hybrid composite theories, and an integrated hygrothermomechanical theory. The INHYD can be run in both interactive and batch modes. It has considerable flexibility and capability, which the user can exercise through several options. These options are demonstrated through appropriate INHYD runs in the manual.

Model Guided Design and Development Process for an Electronic Health Record Training Program

PubMed Central

He, Ze; Marquard, Jenna; Henneman, Elizabeth

2016-01-01

Effective user training is important to ensure electronic health record (EHR) implementation success. Though many previous studies report best practice principles and success and failure stories, current EHR training is largely empirically-based and often lacks theoretical guidance. In addition, the process of training development is underemphasized and underreported. A white paper by the American Medical Informatics Association called for models of user training for clinical information system implementation; existing instructional development models from learning theory provide a basis to meet this call. We describe in this paper our experiences and lessons learned as we adapted several instructional development models to guide our development of EHR user training. Specifically, we focus on two key aspects of this training development: training content and training process. PMID:28269940

Development of a program to fit data to a new logistic model for microbial growth.

PubMed

Fujikawa, Hiroshi; Kano, Yoshihiro

2009-06-01

Recently we developed a mathematical model for microbial growth in food. The model successfully predicted microbial growth at various patterns of temperature. In this study, we developed a program to fit data to the model with a spread sheet program, Microsoft Excel. Users can instantly get curves fitted to the model by inputting growth data and choosing the slope portion of a curve. The program also could estimate growth parameters including the rate constant of growth and the lag period. This program would be a useful tool for analyzing growth data and further predicting microbial growth.

CUMBIN - CUMULATIVE BINOMIAL PROGRAMS

NASA Technical Reports Server (NTRS)

Bowerman, P. N.

1994-01-01

The cumulative binomial program, CUMBIN, is one of a set of three programs which calculate cumulative binomial probability distributions for arbitrary inputs. The three programs, CUMBIN, NEWTONP (NPO-17556), and CROSSER (NPO-17557), can be used independently of one another. CUMBIN can be used by statisticians and users of statistical procedures, test planners, designers, and numerical analysts. The program has been used for reliability/availability calculations. CUMBIN calculates the probability that a system of n components has at least k operating if the probability that any one operating is p and the components are independent. Equivalently, this is the reliability of a k-out-of-n system having independent components with common reliability p. CUMBIN can evaluate the incomplete beta distribution for two positive integer arguments. CUMBIN can also evaluate the cumulative F distribution and the negative binomial distribution, and can determine the sample size in a test design. CUMBIN is designed to work well with all integer values 0 < k <= n. To run the program, the user simply runs the executable version and inputs the information requested by the program. The program is not designed to weed out incorrect inputs, so the user must take care to make sure the inputs are correct. Once all input has been entered, the program calculates and lists the result. The CUMBIN program is written in C. It was developed on an IBM AT with a numeric co-processor using Microsoft C 5.0. Because the source code is written using standard C structures and functions, it should compile correctly with most C compilers. The program format is interactive. It has been implemented under DOS 3.2 and has a memory requirement of 26K. CUMBIN was developed in 1988.

Hydrologic data-verification management program plan

USGS Publications Warehouse

Alexander, C.W.

1982-01-01

Data verification refers to the performance of quality control on hydrologic data that have been retrieved from the field and are being prepared for dissemination to water-data users. Water-data users now have access to computerized data files containing unpublished, unverified hydrologic data. Therefore, it is necessary to develop techniques and systems whereby the computer can perform some data-verification functions before the data are stored in user-accessible files. Computerized data-verification routines can be developed for this purpose. A single, unified concept describing master data-verification program using multiple special-purpose subroutines, and a screen file containing verification criteria, can probably be adapted to any type and size of computer-processing system. Some traditional manual-verification procedures can be adapted for computerized verification, but new procedures can also be developed that would take advantage of the powerful statistical tools and data-handling procedures available to the computer. Prototype data-verification systems should be developed for all three data-processing environments as soon as possible. The WATSTORE system probably affords the greatest opportunity for long-range research and testing of new verification subroutines. (USGS)

CELT: a computerised evaluative learning tool for continuing professional development.

PubMed

Kelly, Diane R; MacKay, Linda

2003-04-01

To evaluate a computerised, evaluative learning tool (CELT) designed to encourage self-directed learning and help users make changes in practice following learning. The study aimed to evaluate how CELT was used and to ascertain user perceptions of the program. Qualitative analysis of interviews and quantitative analysis of entries made using the software. West of Scotland region, comprising six Health Board areas with a total of 2176 general practitioners (GPs), 39 of whom took part in the study. Of the 39 GPs who started on the project, 34 used CELT. Of these 34, 28 GPs sent in files and six did not. Of the 28 GPs who sent in files, 25 entered data and 76% (22/29) considered the program easy to use. The program was used 7 days a week during the day and night. It raised participants' awareness of the educational value of everyday experiences and led to increased thought about learning. In 41% (45/111) of entries there was evidence that some action had been initiated by users as a result of learning. CELT was designed to encourage self-directed learning and help users make changes in practice following learning. The study has shown that it can be used to deliver individual continuing professional development. It encourages a disciplined approach to learning, promotes thought about learning needs and increases the ability of GPs to learn from everyday experiences. In some instances, users were able to apply what had been learned.

Satellite services system analysis study. Volume 5: Programmatics

NASA Technical Reports Server (NTRS)

1981-01-01

The overall program and resources needed for development and operation of a Satellite Services System is reviewed. Program requirements covered system operations through 1993 and were completed in preliminary form. Program requirements were refined based on equipment preliminary design and analysis. Schedules, costs, equipment utilization, and facility/advanced technology requirements were included in the update. Equipment user charges were developed for each piece of equipment and for representative satellite servicing missions.

Public Service Communication Satellite Program

NASA Technical Reports Server (NTRS)

Brown, J. P.

1977-01-01

The proposed NASA Public Service Communication Satellite Program consists of four different activities designed to fulfill the needs of public service sector. These are: interaction with the users, experimentation with existing satellites, development of a limited capability satellite for the earliest possible launch, and initiation of an R&D program to develop the greatly increased capability that future systems will require. This paper will discuss NASA efforts in each of these areas.

Bridge-scour analysis using the water surface profile (WSPRO) model

USGS Publications Warehouse

Mueller, David S.; ,

1993-01-01

A program was developed to extract hydraulic information required for bridge-scour computations, from the Water-Surface Profile computation model (WSPRO). The program is written in compiled BASIC and is menu driven. Using only ground points, the program can compute average ground elevation, cross-sectional area below a specified datum, or create a Drawing Exchange Format (DXF) fie of cross section. Using both ground points ad hydraulic information form the equal-conveyance tubes computed by WSPRO, the program can compute hydraulic parameters at a user-specified station or in a user-specified subsection of the cross section. The program can identify the maximum velocity in a cross section and the velocity and depth at a user-specified station. The program also can identify the maximum velocity in the cross section and the average velocity, average depth, average ground elevation, width perpendicular to the flow, cross-sectional area of flow, and discharge in a subsection of the cross section. This program does not include any help or suggestions as to what data should be extracted; therefore, the used must understand the scour equations and associated variables to the able to extract the proper information from the WSPRO output.

Development and validation of an online interactive, multimedia wound care algorithms program.

PubMed

Beitz, Janice M; van Rijswijk, Lia

2012-01-01

To provide education based on evidence-based and validated wound care algorithms we designed and implemented an interactive, Web-based learning program for teaching wound care. A mixed methods quantitative pilot study design with qualitative components was used to test and ascertain the ease of use, validity, and reliability of the online program. A convenience sample of 56 RN wound experts (formally educated, certified in wound care, or both) participated. The interactive, online program consists of a user introduction, interactive assessment of 15 acute and chronic wound photos, user feedback about the percentage correct, partially correct, or incorrect algorithm and dressing choices and a user survey. After giving consent, participants accessed the online program, provided answers to the demographic survey, and completed the assessment module and photographic test, along with a posttest survey. The construct validity of the online interactive program was strong. Eighty-five percent (85%) of algorithm and 87% of dressing choices were fully correct even though some programming design issues were identified. Online study results were consistently better than previously conducted comparable paper-pencil study results. Using a 5-point Likert-type scale, participants rated the program's value and ease of use as 3.88 (valuable to very valuable) and 3.97 (easy to very easy), respectively. Similarly the research process was described qualitatively as "enjoyable" and "exciting." This digital program was well received indicating its "perceived benefits" for nonexpert users, which may help reduce barriers to implementing safe, evidence-based care. Ongoing research using larger sample sizes may help refine the program or algorithms while identifying clinician educational needs. Initial design imperfections and programming problems identified also underscored the importance of testing all paper and Web-based programs designed to educate health care professionals or guide patient care.

Development and Validation of an Online Program for Promoting Self-Management among Korean Patients with Chronic Hepatitis B.

PubMed

Yang, Jinhyang

2013-01-01

The hepatitis B virus is second only to tobacco as a known human carcinogen. However, chronic hepatitis B usually does not produce symptoms and people feel healthy even in the early stages of live cancer. Therefore, chronically infected people should perceive it as a serious health problem and move on to appropriate health behaviour. The purpose of this paper is to develop and validate an online program for promoting self-management among Korean patients with chronic hepatitis B. The online program was developed using a prototyping approach and system developing life cycle method, evaluated by users for their satisfaction with the website and experts for the quality of the site. To evaluate the application of the online program, knowledge and self-management compliance of the subjects were measured and compared before and after the application of the online program. There were statistically significant increases in knowledge and self-management compliance in the user group. An online program with high accessibility and applicability including information, motivation, and behavior skill factors can promote self-management of the patient with chronic hepatitis B. Findings from this study allow Korean patients with chronic hepatitis B to engage in proactive and effective health management in the community or clinical practice.

Broadband Fan Noise Prediction System for Turbofan Engines. Volume 2; BFaNS User's Manual and Developer's Guide

NASA Technical Reports Server (NTRS)

Morin, Bruce L.

2010-01-01

Pratt & Whitney has developed a Broadband Fan Noise Prediction System (BFaNS) for turbofan engines. This system computes the noise generated by turbulence impinging on the leading edges of the fan and fan exit guide vane, and noise generated by boundary-layer turbulence passing over the fan trailing edge. BFaNS has been validated on three fan rigs that were tested during the NASA Advanced Subsonic Technology Program (AST). The predicted noise spectra agreed well with measured data. The predicted effects of fan speed, vane count, and vane sweep also agreed well with measurements. The noise prediction system consists of two computer programs: Setup_BFaNS and BFaNS. Setup_BFaNS converts user-specified geometry and flow-field information into a BFaNS input file. From this input file, BFaNS computes the inlet and aft broadband sound power spectra generated by the fan and FEGV. The output file from BFaNS contains the inlet, aft and total sound power spectra from each noise source. This report is the second volume of a three-volume set documenting the Broadband Fan Noise Prediction System: Volume 1: Setup_BFaNS User s Manual and Developer s Guide; Volume 2: BFaNS User s Manual and Developer s Guide; and Volume 3: Validation and Test Cases. The present volume begins with an overview of the Broadband Fan Noise Prediction System, followed by step-by-step instructions for installing and running BFaNS. It concludes with technical documentation of the BFaNS computer program.

Broadband Fan Noise Prediction System for Turbofan Engines. Volume 1; Setup_BFaNS User's Manual and Developer's Guide

NASA Technical Reports Server (NTRS)

Morin, Bruce L.

2010-01-01

Pratt & Whitney has developed a Broadband Fan Noise Prediction System (BFaNS) for turbofan engines. This system computes the noise generated by turbulence impinging on the leading edges of the fan and fan exit guide vane, and noise generated by boundary-layer turbulence passing over the fan trailing edge. BFaNS has been validated on three fan rigs that were tested during the NASA Advanced Subsonic Technology Program (AST). The predicted noise spectra agreed well with measured data. The predicted effects of fan speed, vane count, and vane sweep also agreed well with measurements. The noise prediction system consists of two computer programs: Setup_BFaNS and BFaNS. Setup_BFaNS converts user-specified geometry and flow-field information into a BFaNS input file. From this input file, BFaNS computes the inlet and aft broadband sound power spectra generated by the fan and FEGV. The output file from BFaNS contains the inlet, aft and total sound power spectra from each noise source. This report is the first volume of a three-volume set documenting the Broadband Fan Noise Prediction System: Volume 1: Setup_BFaNS User s Manual and Developer s Guide; Volume 2: BFaNS User's Manual and Developer s Guide; and Volume 3: Validation and Test Cases. The present volume begins with an overview of the Broadband Fan Noise Prediction System, followed by step-by-step instructions for installing and running Setup_BFaNS. It concludes with technical documentation of the Setup_BFaNS computer program.

Alloy Design Workbench-Surface Modeling Package Developed

NASA Technical Reports Server (NTRS)

Abel, Phillip B.; Noebe, Ronald D.; Bozzolo, Guillermo H.; Good, Brian S.; Daugherty, Elaine S.

2003-01-01

NASA Glenn Research Center's Computational Materials Group has integrated a graphical user interface with in-house-developed surface modeling capabilities, with the goal of using computationally efficient atomistic simulations to aid the development of advanced aerospace materials, through the modeling of alloy surfaces, surface alloys, and segregation. The software is also ideal for modeling nanomaterials, since surface and interfacial effects can dominate material behavior and properties at this level. Through the combination of an accurate atomistic surface modeling methodology and an efficient computational engine, it is now possible to directly model these types of surface phenomenon and metallic nanostructures without a supercomputer. Fulfilling a High Operating Temperature Propulsion Components (HOTPC) project level-I milestone, a graphical user interface was created for a suite of quantum approximate atomistic materials modeling Fortran programs developed at Glenn. The resulting "Alloy Design Workbench-Surface Modeling Package" (ADW-SMP) is the combination of proven quantum approximate Bozzolo-Ferrante-Smith (BFS) algorithms (refs. 1 and 2) with a productivity-enhancing graphical front end. Written in the portable, platform independent Java programming language, the graphical user interface calls on extensively tested Fortran programs running in the background for the detailed computational tasks. Designed to run on desktop computers, the package has been deployed on PC, Mac, and SGI computer systems. The graphical user interface integrates two modes of computational materials exploration. One mode uses Monte Carlo simulations to determine lowest energy equilibrium configurations. The second approach is an interactive "what if" comparison of atomic configuration energies, designed to provide real-time insight into the underlying drivers of alloying processes.

OAST Space Theme Workshop. Volume 3: Working group summary. 4: Software (E-4). A. Summary. B. Technology needs (form 1). C. Priority assessment (form 2)

NASA Technical Reports Server (NTRS)

1976-01-01

Only a few efforts are currently underway to develop an adequate technology base for the various themes. Particular attention must be given to software commonality and evolutionary capability, to increased system integrity and autonomy; and to improved communications among the program users, the program developers, and the programs themselves. There is a need for quantum improvement in software development methods and increasing the awareness of software by all concerned. Major thrusts identified include: (1) data and systems management; (2) software technology for autonomous systems; (3) technology and methods for improving the software development process; (4) advances related to systems of software elements including their architecture, their attributes as systems, and their interfaces with users and other systems; and (5) applications of software including both the basic algorithms used in a number of applications and the software specific to a particular theme or discipline area. The impact of each theme on software is assessed.

Tools for Integrating Data Access from the IRIS DMC into Research Workflows

NASA Astrophysics Data System (ADS)

Reyes, C. G.; Suleiman, Y. Y.; Trabant, C.; Karstens, R.; Weertman, B. R.

2012-12-01

Web service interfaces at the IRIS Data Management Center (DMC) provide access to a vast archive of seismological and related geophysical data. These interfaces are designed to easily incorporate data access into data processing workflows. Examples of data that may be accessed include: time series data, related metadata, and earthquake information. The DMC has developed command line scripts, MATLAB® interfaces and a Java library to support a wide variety of data access needs. Users of these interfaces do not need to concern themselves with web service details, networking, or even (in most cases) data conversion. Fetch scripts allow access to the DMC archive and are a comfortable fit for command line users. These scripts are written in Perl and are well suited for automation and integration into existing workflows on most operating systems. For metdata and event information, the Fetch scripts even parse the returned data into simple text summaries. The IRIS Java Web Services Library (IRIS-WS Library) allows Java developers the ability to create programs that access the DMC archives seamlessly. By returning the data and information as native Java objects the Library insulates the developer from data formats, network programming and web service details. The MATLAB interfaces leverage this library to allow users access to the DMC archive directly from within MATLAB (r2009b or newer), returning data into variables for immediate use. Data users and research groups are developing other toolkits that use the DMC's web services. Notably, the ObsPy framework developed at LMU Munich is a Python Toolbox that allows seamless access to data and information via the DMC services. Another example is the MATLAB-based GISMO and Waveform Suite developments that can now access data via web services. In summary, there now exist a host of ways that researchers can bring IRIS DMC data directly into their workflows. MATLAB users can use irisFetch.m, command line users can use the various Fetch scripts, Java users can use the IRIS-WS library, and Python users may request data through ObsPy. To learn more about any of these clients see http://www.iris.edu/ws/wsclients/.

Rocket Science 101 Interactive Educational Program

NASA Technical Reports Server (NTRS)

Armstrong, Dennis; Funkhouse, Deborah; DiMarzio, Donald

2007-01-01

To better educate the public on the basic design of NASA s current mission rockets, Rocket Science 101 software has been developed as an interactive program designed to retain a user s attention and to teach about basic rocket parts. This program also has helped to expand NASA's presence on the Web regarding educating the public about the Agency s goals and accomplishments. The software was designed using Macromedia s Flash 8. It allows the user to select which type of rocket they want to learn about, interact with the basic parts, assemble the parts to create the whole rocket, and then review the basic flight profile of the rocket they have built.

Probation Officer Candidate Information Booklet and User's Manual. Standards and Training for Corrections Program.

ERIC Educational Resources Information Center

California State Board of Corrections, Sacramento.

This package consists of an information booklet for job candidates preparing to take California's Probation Officer Examination and a user's manual intended for those who will administer the examination. The candidate information booklet provides background information about the development and validation of the Probation Officer Examination,…

Corrections Officer Candidate Information Booklet and User's Manual. Standards and Training for Corrections Program.

ERIC Educational Resources Information Center

California State Board of Corrections, Sacramento.

This package consists of an information booklet for job candidates preparing to take California's Corrections Officer Examination and a user's manual intended for those who will administer the examination. The candidate information booklet provides background information about the development of the Corrections Officer Examination, describes its…

Evaluating the Impact of Instructional Multimedia: Workable Techniques.

ERIC Educational Resources Information Center

Rathbun, Gail A.; Goodrum, David A.

A framework is proposed for the formative evaluation of multimedia. It describes techniques that have worked well in the evaluation of software development and gives examples of the use of evaluation results. The focus is primarily on the degree to which the instructional multimedia program supports the user's activities and tasks in the user's…

National Occupational Skill Standards. CADD: Computer Aided Drafting and Design.

ERIC Educational Resources Information Center

National Coalition for Advanced Manufacturing, Washington, DC.

This document identifies computer-aided drafting and design (CADD) skills that companies require of training programs and future employees. The information was developed by two committees of technically knowledgeable CADD users from across the United States and validated by several hundred other CADD users. The skills are aimed at a beginner CADD…

UserTesting.com: A Tool for Usability Testing of Online Resources

ERIC Educational Resources Information Center

Koundinya, Vikram; Klink, Jenna; Widhalm, Melissa

2017-01-01

Extension educators are increasingly using online resources in their program design and delivery. Usability testing is essential for ensuring that these resources are relevant and useful to learners. On the basis of our experiences with iteratively developing products using a testing service called UserTesting, we promote the use of fee-based…

Evaluation of the discrete vortex wake cross flow model using vector computers. Part 2: User's manual for DIVORCE

NASA Technical Reports Server (NTRS)

Deffenbaugh, F. D.; Vitz, J. F.

1979-01-01

The users manual for the Discrete Vortex Cross flow Evaluator (DIVORCE) computer program is presented. DIVORCE was developed in FORTRAN 4 for the DCD 6600 and CDC 7600 machines. Optimal calls to a NASA vector subroutine package are provided for use with the CDC 7600.

Probabilistic Structural Analysis Methods (PSAM) for select space propulsion system components, part 2

NASA Technical Reports Server (NTRS)

1991-01-01

The technical effort and computer code enhancements performed during the sixth year of the Probabilistic Structural Analysis Methods program are summarized. Various capabilities are described to probabilistically combine structural response and structural resistance to compute component reliability. A library of structural resistance models is implemented in the Numerical Evaluations of Stochastic Structures Under Stress (NESSUS) code that included fatigue, fracture, creep, multi-factor interaction, and other important effects. In addition, a user interface was developed for user-defined resistance models. An accurate and efficient reliability method was developed and was successfully implemented in the NESSUS code to compute component reliability based on user-selected response and resistance models. A risk module was developed to compute component risk with respect to cost, performance, or user-defined criteria. The new component risk assessment capabilities were validated and demonstrated using several examples. Various supporting methodologies were also developed in support of component risk assessment.

Activity Catalog Tool (ACT) user manual, version 2.0

NASA Technical Reports Server (NTRS)

Segal, Leon D.; Andre, Anthony D.

1994-01-01

This report comprises the user manual for version 2.0 of the Activity Catalog Tool (ACT) software program, developed by Leon D. Segal and Anthony D. Andre in cooperation with NASA Ames Aerospace Human Factors Research Division, FLR branch. ACT is a software tool for recording and analyzing sequences of activity over time that runs on the Macintosh platform. It was designed as an aid for professionals who are interested in observing and understanding human behavior in field settings, or from video or audio recordings of the same. Specifically, the program is aimed at two primary areas of interest: human-machine interactions and interactions between humans. The program provides a means by which an observer can record an observed sequence of events, logging such parameters as frequency and duration of particular events. The program goes further by providing the user with a quantified description of the observed sequence, through application of a basic set of statistical routines, and enables merging and appending of several files and more extensive analysis of the resultant data.

Internet Technology in Magnetic Resonance: A Common Gateway Interface Program for the World-Wide Web NMR Spectrometer

NASA Astrophysics Data System (ADS)

Buszko, Marian L.; Buszko, Dominik; Wang, Daniel C.

1998-04-01

A custom-written Common Gateway Interface (CGI) program for remote control of an NMR spectrometer using a World Wide Web browser has been described. The program, running on a UNIX workstation, uses multiple processes to handle concurrent tasks of interacting with the user and with the spectrometer. The program's parent process communicates with the browser and sends out commands to the spectrometer; the child process is mainly responsible for data acquisition. Communication between the processes is via the shared memory mechanism. The WWW pages that have been developed for the system make use of the frames feature of web browsers. The CGI program provides an intuitive user interface to the NMR spectrometer, making, in effect, a complex system an easy-to-use Web appliance.

Marshall Space Flight Center Telescience Resource Kit

NASA Technical Reports Server (NTRS)

Wade, Gina

2016-01-01

Telescience Resource Kit (TReK) is a suite of software applications that can be used to monitor and control assets in space or on the ground. The Telescience Resource Kit was originally developed for the International Space Station program. Since then it has been used to support a variety of NASA programs and projects including the WB-57 Ascent Vehicle Experiment (WAVE) project, the Fast Affordable Science and Technology Satellite (FASTSAT) project, and the Constellation Program. The Payloads Operations Center (POC), also known as the Payload Operations Integration Center (POIC), provides the capability for payload users to operate their payloads at their home sites. In this environment, TReK provides local ground support system services and an interface to utilize remote services provided by the POC. TReK provides ground system services for local and remote payload user sites including International Partner sites, Telescience Support Centers, and U.S. Investigator sites in over 40 locations worldwide. General Capabilities: Support for various data interfaces such as User Datagram Protocol, Transmission Control Protocol, and Serial interfaces. Data Services - retrieve, process, record, playback, forward, and display data (ground based data or telemetry data). Command - create, modify, send, and track commands. Command Management - Configure one TReK system to serve as a command server/filter for other TReK systems. Database - databases are used to store telemetry and command definition information. Application Programming Interface (API) - ANSI C interface compatible with commercial products such as Visual C++, Visual Basic, LabVIEW, Borland C++, etc. The TReK API provides a bridge for users to develop software to access and extend TReK services. Environments - development, test, simulations, training, and flight. Includes standalone training simulators.

Development of a simulated smart pump interface.

PubMed

Elias, Beth L; Moss, Jacqueline A; Shih, Alan; Dillavou, Marcus

2014-01-01

Medical device user interfaces are increasingly complex, resulting in a need for evaluation in clinicallyaccurate settings. Simulation of these interfaces can allow for evaluation, training, and use for research without the risk of harming patients and with a significant cost reduction over using the actual medical devices. This pilot project was phase 1 of a study to define and evaluate a methodology for development of simulated medical device interface technology to be used for education, device development, and research. Digital video and audio recordings of interface interactions were analyzed to develop a model of a smart intravenous medication infusion pump user interface. This model was used to program a high-fidelity simulated smart intravenous medication infusion pump user interface on an inexpensive netbook platform.

Airport Performance Model : Volume 2 - User's Manual and Program Documentation

DOT National Transportation Integrated Search

1978-10-01

Volume II contains a User's manual and program documentation for the Airport Performance Model. This computer-based model is written in FORTRAN IV for the DEC-10. The user's manual describes the user inputs to the interactive program and gives sample...

The LATDYN user's manual

NASA Technical Reports Server (NTRS)

Housner, J. M.; Mcgowan, P. E.; Abrahamson, A. L.; Powell, M. G.

1986-01-01

The LATDYN User's Manual presents the capabilities and instructions for the LATDYN (Large Angle Transient DYNamics) computer program. The LATDYN program is a tool for analyzing the controlled or uncontrolled dynamic transient behavior of interconnected deformable multi-body systems which can undergo large angular motions of each body relative other bodies. The program accommodates large structural deformation as well as large rigid body rotations and is applicable, but not limited to, the following areas: (1) development of large flexible space structures; (2) slewing of large space structure components; (3) mechanisms with rigid or elastic components; and (4) robotic manipulations of beam members. Presently the program is limited to two dimensional problems, but in many cases, three dimensional problems can be exactly or approximately reduced to two dimensions. The program uses convected finite elements to affect the large angular motions involved in the analysis. General geometry is permitted. Detailed user input and output specifications are provided and discussed with example runstreams. To date, LATDYN has been configured for CDC/NOS and DEC VAX/VMS machines. All coding is in ANSII-77 FORTRAN. Detailed instructions regarding interfaces with particular computer operating systems and file structures are provided.

Formative evaluation of a multimedia self-administered computerized hearing loss prevention program.

PubMed

Saunders, Gabrielle H; Vachhani, Jay J; Galvez, Gino; Griest, Susan E

2015-04-01

To determine which features make a computer-based hearing health education intervention effective, easy to use, and enjoyable. The study examined which features of a multimedia self-administered computerized hearing loss prevention program, developed by the National Center for Rehabilitative Auditory Research (referred to as the NCRAR-HLPP), users liked and disliked, and the reasons why. A formative evaluation was conducted in which participants completed a questionnaire to assess knowledge and attitudes towards hearing and hearing loss prevention, used the NCRAR-HLPP, completed the questionnaire for a second time, and were interviewed to learn their opinions about the NCRAR-HLPP. Twenty-five male and four female Veterans recruited from the Portland VA Medical Center who were aged between 25 and 65 years. Participants reported that using the NCRAR-HLPP was a positive experience. Ease of use, multimedia content, personal relevance, and use of emotion were positive features of the program. The questionnaire showed increased knowledge and improved attitude scores following use of the program. This formative evaluation showed changes designed to target user preferences and improve user instructions will be made in future versions of the program.

User's guide: Programs for processing altimeter data over inland seas

NASA Technical Reports Server (NTRS)

Au, A. Y.; Brown, R. D.; Welker, J. E.

1989-01-01

The programs described were developed to process GEODYN-formatted satellite altimeter data, and to apply the processed results to predict geoid undulations and gravity anomalies of inland sea areas. These programs are written in standard FORTRAN 77 and are designed to run on the NSESCC IBM 3081(MVS) computer. Because of the experimental nature of these programs they are tailored to the geographical area analyzed. The attached program listings are customized for processing the altimeter data over the Black Sea. Users interested in the Caspian Sea data are expected to modify each program, although the required modifications are generally minor. Program control parameters are defined in the programs via PARAMETER statements and/or DATA statements. Other auxiliary parameters, such as labels, are hard-wired into the programs. Large data files are read in or written out through different input or output units. The program listings of these programs are accompanied by sample IBM job control language (JCL) images. Familiarity with IBM JCL and the TEMPLATE graphic package is assumed.

ASSIST internals reference manual

NASA Technical Reports Server (NTRS)

Johnson, Sally C.; Boerschlein, David P.

1994-01-01

The Abstract Semi-Markov Specification Interface to the SURE Tool (ASSIST) program was developed at NASA LaRC in order to analyze the reliability of virtually any fault-tolerant system. A user manual was developed to detail its use. Certain technical specifics are of no concern to the end user, yet are of importance to those who must maintain and/or verify the correctness of the tool. This document takes a detailed look into these technical issues.

Guidelines for development of NASA (National Aeronautics and Space Administration) computer security training programs

NASA Technical Reports Server (NTRS)

Tompkins, F. G.

1983-01-01

The report presents guidance for the NASA Computer Security Program Manager and the NASA Center Computer Security Officials as they develop training requirements and implement computer security training programs. NASA audiences are categorized based on the computer security knowledge required to accomplish identified job functions. Training requirements, in terms of training subject areas, are presented for both computer security program management personnel and computer resource providers and users. Sources of computer security training are identified.

Collection development using interlibrary loan borrowing and acquisitions statistics.

PubMed Central

Byrd, G D; Thomas, D A; Hughes, K E

1982-01-01

Libraries, especially those supporting the sciences, continually face the problem of selecting appropriate new books for their users. Traditional collection development techniques include the use of librarian or user subject specialists, user recommendations, and approval plans. These methods of selection, however, are most effective in large libraries and do not systemically correlate new book purchases with the actual demands of users served. This paper describes a statistical method for determining subject strengths and weaknesses in a library book collection in relation to user demand. Using interlibrary loan borrowing and book acquisition statistics gathered for one fiscal year from three health sciences libraries, the authors developed a way to graph the broad and narrow subject fields of strength and potential weakness in a book collection. This method has the advantages of simplicity, speed of implementation, and clarity. It can also be used over a period of time to verify the success or failure of a collection development program. Finally, the method has potential as a tool for use by two or more libraries seeking to improve cooperative collection development in a network or consortium. PMID:7059712

EARSEC SAR processing system

NASA Astrophysics Data System (ADS)

Protheroe, Mark; Sloggett, David R.; Sieber, Alois J.

1994-12-01

Traditionally, the production of high quality Synthetic Aperture Radar imagery has been an area where a potential user would have to expend large amounts of money in either the bespoke development of a processing chain dedicated to his requirements or in the purchase of a dedicated hardware platform adapted using accelerator boards and enhanced memory management. Whichever option the user adopted there were limitations based on the desire for a realistic throughput in data load and time. The user had a choice, made early in the purchase, for either a system that adopted innovative algorithmic manipulation, to limit the processing time of the purchase of expensive hardware. The former limits the quality of the product, while the latter excludes the user from any visibility into the processing chain. Clearly there was a need for a SAR processing architecture that gave the user a choice into the methodology to be adopted for a particular processing sequence, allowing him to decide on either a quick (lower quality) product or a detailed slower (high quality) product, without having to change the algorithmic base of his processor or the hardware platform. The European Commission, through the Advanced Techniques unit of the Joint Research Centre (JRC) Institute for Remote Sensing at Ispra in Italy, realizing the limitations on current processing abilities, initiated its own program to build airborne SAR and Electro-Optical (EO) sensor systems. This program is called the European Airborne Remote Sensing Capabilities (EARSEC) program. This paper describes the processing system developed for the airborne SAR sensor system. The paper considers the requirements for the system and the design of the EARSEC Airborne SAR Processing System. It highlights the development of an open SAR processing architecture where users have full access to intermediate products that arise from each of the major processing stages. It also describes the main processing stages in the overall architecture and illustrates the results of each of the key stages in the processor.

Systems cost/performance analysis (study 2.3). Volume 2: Systems cost/performance model. [unmanned automated payload programs and program planning

NASA Technical Reports Server (NTRS)

Campbell, B. H.

1974-01-01

A methodology which was developed for balanced designing of spacecraft subsystems and interrelates cost, performance, safety, and schedule considerations was refined. The methodology consists of a two-step process: the first step is one of selecting all hardware designs which satisfy the given performance and safety requirements, the second step is one of estimating the cost and schedule required to design, build, and operate each spacecraft design. Using this methodology to develop a systems cost/performance model allows the user of such a model to establish specific designs and the related costs and schedule. The user is able to determine the sensitivity of design, costs, and schedules to changes in requirements. The resulting systems cost performance model is described and implemented as a digital computer program.

Java Mission Evaluation Workstation System

NASA Technical Reports Server (NTRS)

Pettinger, Ross; Watlington, Tim; Ryley, Richard; Harbour, Jeff

2006-01-01

The Java Mission Evaluation Workstation System (JMEWS) is a collection of applications designed to retrieve, display, and analyze both real-time and recorded telemetry data. This software is currently being used by both the Space Shuttle Program (SSP) and the International Space Station (ISS) program. JMEWS was written in the Java programming language to satisfy the requirement of platform independence. An object-oriented design was used to satisfy additional requirements and to make the software easily extendable. By virtue of its platform independence, JMEWS can be used on the UNIX workstations in the Mission Control Center (MCC) and on office computers. JMEWS includes an interactive editor that allows users to easily develop displays that meet their specific needs. The displays can be developed and modified while viewing data. By simply selecting a data source, the user can view real-time, recorded, or test data.

A Java-based enterprise system architecture for implementing a continuously supported and entirely Web-based exercise solution.

PubMed

Wang, Zhihui; Kiryu, Tohru

2006-04-01

Since machine-based exercise still uses local facilities, it is affected by time and place. We designed a web-based system architecture based on the Java 2 Enterprise Edition that can accomplish continuously supported machine-based exercise. In this system, exercise programs and machines are loosely coupled and dynamically integrated on the site of exercise via the Internet. We then extended the conventional health promotion model, which contains three types of players (users, exercise trainers, and manufacturers), by adding a new player: exercise program creators. Moreover, we developed a self-describing strategy to accommodate a variety of exercise programs and provide ease of use to users on the web. We illustrate our novel design with examples taken from our feasibility study on a web-based cycle ergometer exercise system. A biosignal-based workload control approach was introduced to ensure that users performed appropriate exercise alone.

HIV Therapy Simulator: a graphical user interface for comparing the effectiveness of novel therapy regimens.

PubMed

Lim, Huat Chye; Curlin, Marcel E; Mittler, John E

2011-11-01

Computer simulation models can be useful in exploring the efficacy of HIV therapy regimens in preventing the evolution of drug-resistant viruses. Current modeling programs, however, were designed by researchers with expertise in computational biology, limiting their accessibility to those who might lack such a background. We have developed a user-friendly graphical program, HIV Therapy Simulator (HIVSIM), that is accessible to non-technical users. The program allows clinicians and researchers to explore the effectiveness of various therapeutic strategies, such as structured treatment interruptions, booster therapies and induction-maintenance therapies. We anticipate that HIVSIM will be useful for evaluating novel drug-based treatment concepts in clinical research, and as an educational tool. HIV Therapy Simulator is freely available for Mac OS and Windows at http://sites.google.com/site/hivsimulator/. jmittler@uw.edu. Supplementary data are available at Bioinformatics online.

A new programming metaphor for image processing procedures

NASA Technical Reports Server (NTRS)

Smirnov, O. M.; Piskunov, N. E.

1992-01-01

Most image processing systems, besides an Application Program Interface (API) which lets users write their own image processing programs, also feature a higher level of programmability. Traditionally, this is a command or macro language, which can be used to build large procedures (scripts) out of simple programs or commands. This approach, a legacy of the teletypewriter has serious drawbacks. A command language is clumsy when (and if! it attempts to utilize the capabilities of a multitasking or multiprocessor environment, it is but adequate for real-time data acquisition and processing, it has a fairly steep learning curve, and the user interface is very inefficient,. especially when compared to a graphical user interface (GUI) that systems running under Xll or Windows should otherwise be able to provide. ll these difficulties stem from one basic problem: a command language is not a natural metaphor for an image processing procedure. A more natural metaphor - an image processing factory is described in detail. A factory is a set of programs (applications) that execute separate operations on images, connected by pipes that carry data (images and parameters) between them. The programs function concurrently, processing images as they arrive along pipes, and querying the user for whatever other input they need. From the user's point of view, programming (constructing) factories is a lot like playing with LEGO blocks - much more intuitive than writing scripts. Focus is on some of the difficulties of implementing factory support, most notably the design of an appropriate API. It also shows that factories retain all the functionality of a command language (including loops and conditional branches), while suffering from none of the drawbacks outlined above. Other benefits of factory programming include self-tuning factories and the process of encapsulation, which lets a factory take the shape of a standard application both from the system and the user's point of view, and thus be used as a component of other factories. A bare-bones prototype of factory programming was implemented under the PcIPS image processing system, and a complete version (on a multitasking platform) is under development.

Users guide for the Water Resources Division bibliographic retrieval and report generation system

USGS Publications Warehouse

Tamberg, Nora

1983-01-01

The WRDBIB Retrieval and Report-generation system has been developed by applying Multitrieve (CSD 1980, Reston) software to bibliographic data files. The WRDBIB data base includes some 9 ,000 records containing bibliographic citations and descriptors of WRD reports released for publication during 1968-1982. The data base is resident in the Reston Multics computer and may be accessed by registered Multics users in the field. The WRDBIB Users Guide provides detailed procedures on how to run retrieval programs using WRDBIB library files, and how to prepare custom bibliographic reports and author indexes. Users may search the WRDBIB data base on the following variable fields as described in the Data Dictionary: Authors, organizational source, title, citation, publication year, descriptors, and the WRSIC (accession) number. The Users Guide provides ample examples of program runs illustrating various retrieval and report generation aspects. Appendices include Multics access and file manipulation procedures; a ' Glossary of Selected Terms'; and a complete ' Retrieval Session ' with step-by-step outlines. (USGS)

Users' manual for the Langley high speed propeller noise prediction program (DFP-ATP)

NASA Technical Reports Server (NTRS)

Dunn, M. H.; Tarkenton, G. M.

1989-01-01

The use of the Dunn-Farassat-Padula Advanced Technology Propeller (DFP-ATP) noise prediction program which computes the periodic acoustic pressure signature and spectrum generated by propellers moving with supersonic helical tip speeds is described. The program has the capacity of predicting noise produced by a single-rotation propeller (SRP) or a counter-rotation propeller (CRP) system with steady or unsteady blade loading. The computational method is based on two theoretical formulations developed by Farassat. One formulation is appropriate for subsonic sources, and the other for transonic or supersonic sources. Detailed descriptions of user input, program output, and two test cases are presented, as well as brief discussions of the theoretical formulations and computational algorithms employed.

The Effectiveness of an Interactive Multimedia Program to Influence Eating Habits

ERIC Educational Resources Information Center

Irvine, A. Blair; Ary, Dennis V.; Grove, Dean A.; Gilfillan-Morton, Lynn

2004-01-01

An interactive multimedia program to encourage individuals to decrease their dietary fat consumption and to increase consumption of fruits and vegetables was developed and evaluated at two worksites. The program presented content tailored to the user by gender, content interests, race, and age group. It was tested using a randomized treatment and…

Establishing the LINC (Learning Individualized for Canadians) Program: A Manual for Administrators and Instructors.

ERIC Educational Resources Information Center

Tippett, Glen; Mullen, Vernon

A manual to accompany LINC courses in communications and mathematics, containing information on background, objectives, components, individualized process, and procedures for curriculum development and implementation of LINC Program, is presented. It was formerly referred to as The LINC Program User's Manual. An appendix includes a Reading List…

Education Demographic and Geographic Estimates Program (EDGE): Locale Boundaries User's Manual. NCES 2016-012

ERIC Educational Resources Information Center

Geverdt, Douglas E.

2015-01-01

The National Center for Education Statistics (NCES) Education Demographic and Geographic Estimates (EDGE) program develops geographic data to help policymakers, program administrators, and the public understand relationships between educational institutions and the communities they serve. One of the commonly used geographic data items is the NCES…

Building "My First NMRviewer": A Project Incorporating Coding and Programming Tasks in the Undergraduate Chemistry Curricula

ERIC Educational Resources Information Center

Arrabal-Campos, Francisco M.; Cortés-Villena, Alejandro; Fernández, Ignacio

2017-01-01

This paper presents a programming project named NMRviewer that allows students to visualize transformed and processed 1 H NMR data in an accessible, interactive format while allowing instructors to incorporate programming content into the chemistry curricula. Using the MATLAB graphical user interface development environment (GUIDE), students can…

Computer program documentation user information for the MPAD trajectory tape print program (TRJPR1)

NASA Technical Reports Server (NTRS)

Gibbs, P. M.

1981-01-01

The Trajectory Tape Print Program (TRJPR1) was developed to print applicable information from a Space Trajectory tape created by the Mission Planning and Analysis Division (MPAD) in the MPAD Common Format for the on-orbit phase of the Mission. Instructions for TRJPR1's use are given.

Program Multi - A Multi-purpose Program for Computing and Graphing Roots and Values for Any Real Function -- Users/Programmers Manual

DOT National Transportation Integrated Search

1976-05-01

As part of its activity under the Rail Equipment Safety Project, computer programs for track/train dynamics analysis are being developed and modified. As part of this effort, derailment behavior of trains negotiating curves under buff or draft has be...

Requirements for Programming Languages in Computer-Based Instructional Systems.

ERIC Educational Resources Information Center

Zinn, Karl

The author reviews the instructional programing languages which already exist and describes their methods of presentation, organization, and preparation. He recommends that all research and development projects remain flexible in their choice of programing language for a time yet. He suggests ways to adapt to specific uses and users, to exploit…

Propeller aircraft interior noise model: User's manual for computer program

NASA Technical Reports Server (NTRS)

Wilby, E. G.; Pope, L. D.

1985-01-01

A computer program entitled PAIN (Propeller Aircraft Interior Noise) has been developed to permit calculation of the sound levels in the cabin of a propeller-driven airplane. The fuselage is modeled as a cylinder with a structurally integral floor, the cabin sidewall and floor being stiffened by ring frames, stringers and floor beams of arbitrary configurations. The cabin interior is covered with acoustic treatment and trim. The propeller noise consists of a series of tones at harmonics of the blade passage frequency. Input data required by the program include the mechanical and acoustical properties of the fuselage structure and sidewall trim. Also, the precise propeller noise signature must be defined on a grid that lies in the fuselage skin. The propeller data are generated with a propeller noise prediction program such as the NASA Langley ANOPP program. The program PAIN permits the calculation of the space-average interior sound levels for the first ten harmonics of a propeller rotating alongside the fuselage. User instructions for PAIN are given in the report. Development of the analytical model is presented in NASA CR 3813.

AOIPS data base management systems support for GARP data sets

NASA Technical Reports Server (NTRS)

Gary, J. P.

1977-01-01

A data base management system is identified, developed to provide flexible access to data sets produced by GARP during its data systems tests. The content and coverage of the data base are defined and a computer-aided, interactive information storage and retrieval system, implemented to facilitate access to user specified data subsets, is described. The computer programs developed to provide the capability were implemented on the highly interactive, minicomputer-based AOIPS and are referred to as the data retrieval system (DRS). Implemented as a user interactive but menu guided system, the DRS permits users to inventory the data tape library and create duplicate or subset data sets based on a user selected window defined by time and latitude/longitude boundaries. The DRS permits users to select, display, or produce formatted hard copy of individual data items contained within the data records.

Language workbench user interfaces for data analysis

PubMed Central

Benson, Victoria M.

2015-01-01

Biological data analysis is frequently performed with command line software. While this practice provides considerable flexibility for computationally savy individuals, such as investigators trained in bioinformatics, this also creates a barrier to the widespread use of data analysis software by investigators trained as biologists and/or clinicians. Workflow systems such as Galaxy and Taverna have been developed to try and provide generic user interfaces that can wrap command line analysis software. These solutions are useful for problems that can be solved with workflows, and that do not require specialized user interfaces. However, some types of analyses can benefit from custom user interfaces. For instance, developing biomarker models from high-throughput data is a type of analysis that can be expressed more succinctly with specialized user interfaces. Here, we show how Language Workbench (LW) technology can be used to model the biomarker development and validation process. We developed a language that models the concepts of Dataset, Endpoint, Feature Selection Method and Classifier. These high-level language concepts map directly to abstractions that analysts who develop biomarker models are familiar with. We found that user interfaces developed in the Meta-Programming System (MPS) LW provide convenient means to configure a biomarker development project, to train models and view the validation statistics. We discuss several advantages of developing user interfaces for data analysis with a LW, including increased interface consistency, portability and extension by language composition. The language developed during this experiment is distributed as an MPS plugin (available at http://campagnelab.org/software/bdval-for-mps/). PMID:25755929

Developing a Promotional Campaign for a Statewide Continuing Education System.

ERIC Educational Resources Information Center

Munger, Paul; And Others

1981-01-01

Describes activities developed in promoting a statewide continuing education system. They included television and radio advertisements, a user's manual, and a logo. Program evaluation and implementation are also discussed. (CT)

MEDLINE end-user survey: the University of Florida experience.

PubMed

Hsu, P P

1991-01-01

The University of Florida Health Science Center Library (UF-HSCL) surveyed MEDLINE end-user activities of the faculty from the six colleges which the UF-HSCL serves. A questionnaire was developed and sent to all faculty members. The Basic SAS program was used to analyze the collected data. This survey was intended to identify the users, the reasons for faculty members not being end users, the purpose for searching MEDLINE, the information retrieval methods, the level of end-user satisfaction, and the librarian's role in information retrieval activities. Many findings from this survey were in agreement with those of the 1988 study by the National Library of Medicine.

Web Program for Development of GUIs for Cluster Computers

NASA Technical Reports Server (NTRS)

Czikmantory, Akos; Cwik, Thomas; Klimeck, Gerhard; Hua, Hook; Oyafuso, Fabiano; Vinyard, Edward

2003-01-01

WIGLAF (a Web Interface Generator and Legacy Application Facade) is a computer program that provides a Web-based, distributed, graphical-user-interface (GUI) framework that can be adapted to any of a broad range of application programs, written in any programming language, that are executed remotely on any cluster computer system. WIGLAF enables the rapid development of a GUI for controlling and monitoring a specific application program running on the cluster and for transferring data to and from the application program. The only prerequisite for the execution of WIGLAF is a Web-browser program on a user's personal computer connected with the cluster via the Internet. WIGLAF has a client/server architecture: The server component is executed on the cluster system, where it controls the application program and serves data to the client component. The client component is an applet that runs in the Web browser. WIGLAF utilizes the Extensible Markup Language to hold all data associated with the application software, Java to enable platform-independent execution on the cluster system and the display of a GUI generator through the browser, and the Java Remote Method Invocation software package to provide simple, effective client/server networking.

A computational system for aerodynamic design and analysis of supersonic aircraft. Part 2: User's manual

NASA Technical Reports Server (NTRS)

Middleton, W. D.; Lundry, J. L.; Coleman, R. G.

1976-01-01

An integrated system of computer programs was developed for the design and analysis of supersonic configurations. The system uses linearized theory methods for the calculation of surface pressures and supersonic area rule concepts in combination with linearized theory for calculation of aerodynamic force coefficients. Interactive graphics are optional at the user's request. This user's manual contains a description of the system, an explanation of its usage, the input definition, and example output.

Analyzing Feedback Control Systems

NASA Technical Reports Server (NTRS)

Bauer, Frank H.; Downing, John P.

1987-01-01

Interactive controls analysis (INCA) program developed to provide user-friendly environment for design and analysis of linear control systems, primarily feedback control. Designed for use with both small- and large-order systems. Using interactive-graphics capability, INCA user quickly plots root locus, frequency response, or time response of either continuous-time system or sampled-data system. Configuration and parameters easily changed, allowing user to design compensation networks and perform sensitivity analyses in very convenient manner. Written in Pascal and FORTRAN.

LDA-Based Unified Topic Modeling for Similar TV User Grouping and TV Program Recommendation.

PubMed

Pyo, Shinjee; Kim, Eunhui; Kim, Munchurl

2015-08-01

Social TV is a social media service via TV and social networks through which TV users exchange their experiences about TV programs that they are viewing. For social TV service, two technical aspects are envisioned: grouping of similar TV users to create social TV communities and recommending TV programs based on group and personal interests for personalizing TV. In this paper, we propose a unified topic model based on grouping of similar TV users and recommending TV programs as a social TV service. The proposed unified topic model employs two latent Dirichlet allocation (LDA) models. One is a topic model of TV users, and the other is a topic model of the description words for viewed TV programs. The two LDA models are then integrated via a topic proportion parameter for TV programs, which enforces the grouping of similar TV users and associated description words for watched TV programs at the same time in a unified topic modeling framework. The unified model identifies the semantic relation between TV user groups and TV program description word groups so that more meaningful TV program recommendations can be made. The unified topic model also overcomes an item ramp-up problem such that new TV programs can be reliably recommended to TV users. Furthermore, from the topic model of TV users, TV users with similar tastes can be grouped as topics, which can then be recommended as social TV communities. To verify our proposed method of unified topic-modeling-based TV user grouping and TV program recommendation for social TV services, in our experiments, we used real TV viewing history data and electronic program guide data from a seven-month period collected by a TV poll agency. The experimental results show that the proposed unified topic model yields an average 81.4% precision for 50 topics in TV program recommendation and its performance is an average of 6.5% higher than that of the topic model of TV users only. For TV user prediction with new TV programs, the average prediction precision was 79.6%. Also, we showed the superiority of our proposed model in terms of both topic modeling performance and recommendation performance compared to two related topic models such as polylingual topic model and bilingual topic model.

An Accessible User Interface for Geoscience and Programming

NASA Astrophysics Data System (ADS)

Sevre, E. O.; Lee, S.

2012-12-01

The goal of this research is to develop an interface that will simplify user interaction with software for scientists. The motivating factor of the research is to develop tools that assist scientists with limited motor skills with the efficient generation and use of software tools. Reliance on computers and programming is increasing in the world of geology, and it is increasingly important for geologists and geophysicists to have the computational resources to use advanced software and edit programs for their research. I have developed a prototype of a program to help geophysicists write programs using a simple interface that requires only simple single-mouse-clicks to input code. It is my goal to minimize the amount of typing necessary to create simple programs and scripts to increase accessibility for people with disabilities limiting fine motor skills. This interface can be adapted for various programming and scripting languages. Using this interface will simplify development of code for C/C++, Java, and GMT, and can be expanded to support any other text based programming language. The interface is designed around the concept of maximizing the amount of code that can be written using a minimum number of clicks and typing. The screen is split into two sections: a list of click-commands is on the left hand side, and a text area is on the right hand side. When the user clicks on a command on the left hand side the applicable code is automatically inserted at the insertion point in the text area. Currently in the C/C++ interface, there are commands for common code segments that are often used, such as for loops, comments, print statements, and structured code creation. The primary goal is to provide an interface that will work across many devices for developing code. A simple prototype has been developed for the iPad. Due to the limited number of devices that an iOS application can be used with, the code has been re-written in Java to run on a wider range of devices. Currently, the software works in a prototype mode, and it is our goal to further development to create software that can benefit a wide range of people working in geosciences, which will make code development practical and accessible for a wider audience of scientists. By using an interface like this, it reduces potential for errors by reusing known working code.

SEDAC data and applications development plan V(1)

NASA Technical Reports Server (NTRS)

Chen, Robert S. (Compiler)

1995-01-01

This Data and Applications Development Plan describes how the Socioeconomic Data and Applications Center (SEDAC) at the Consortium for International Earth Science Information Network (CIESIN) is responding to SEDAC's mission to develop new applications and information products that synthesize earth science and socioeconomic data in ways that support decision making. The SEDAC data and applications development effort is a primary means by which the Earth Observing System Data and Information System (EOSDIS) program can help to ensure that the scientific investment embodied in NASA's Mission to Planet Earth (MTPE) program leads to tangible benefits to the American people. The Plan describes the major issues concerned with global climate change, identifies important decision makers and other users who would benefit from improved data and information, and assesses key opportunities for responding to the needs of these users and the scientists who work with them. It then details specific plans for developing selected integrated data products and services and for making them available to the target users on an operational basis. This report provides a summary of the activities performed in connection with NASA/GSFC Letter Contract NAS5-3263 for the period shown.

The 25 kW power module evolution study. Part 3: Conceptual designs for power module evolution. Volume 2: Program plans

NASA Technical Reports Server (NTRS)

1979-01-01

A plan is presented for the evolutionary development and deployment of the power module system with performance capabilities required to support the 1983 to 1990 user requirements. Aspects summarized include program functional, operational, and hardware elements; program work breakdown and specification items; development plans and schedules for developmental and technology milestones; test concepts and timeliness; and ground and orbit operations concepts.

AESOP- INTERACTIVE DESIGN OF LINEAR QUADRATIC REGULATORS AND KALMAN FILTERS

NASA Technical Reports Server (NTRS)

Lehtinen, B.

1994-01-01

AESOP was developed to solve a number of problems associated with the design of controls and state estimators for linear time-invariant systems. The systems considered are modeled in state-variable form by a set of linear differential and algebraic equations with constant coefficients. Two key problems solved by AESOP are the linear quadratic regulator (LQR) design problem and the steady-state Kalman filter design problem. AESOP is designed to be used in an interactive manner. The user can solve design problems and analyze the solutions in a single interactive session. Both numerical and graphical information are available to the user during the session. The AESOP program is structured around a list of predefined functions. Each function performs a single computation associated with control, estimation, or system response determination. AESOP contains over sixty functions and permits the easy inclusion of user defined functions. The user accesses these functions either by inputting a list of desired functions in the order they are to be performed, or by specifying a single function to be performed. The latter case is used when the choice of function and function order depends on the results of previous functions. The available AESOP functions are divided into several general areas including: 1) program control, 2) matrix input and revision, 3) matrix formation, 4) open-loop system analysis, 5) frequency response, 6) transient response, 7) transient function zeros, 8) LQR and Kalman filter design, 9) eigenvalues and eigenvectors, 10) covariances, and 11) user-defined functions. The most important functions are those that design linear quadratic regulators and Kalman filters. The user interacts with AESOP when using these functions by inputting design weighting parameters and by viewing displays of designed system response. Support functions obtain system transient and frequency responses, transfer functions, and covariance matrices. AESOP can also provide the user with open-loop system information including stability, controllability, and observability. The AESOP program is written in FORTRAN IV for interactive execution and has been implemented on an IBM 3033 computer using TSS 370. As currently configured, AESOP has a central memory requirement of approximately 2 Megs of 8 bit bytes. Memory requirements can be reduced by redimensioning arrays in the AESOP program. Graphical output requires adaptation of the AESOP plot routines to whatever device is available. The AESOP program was developed in 1984.

NASTRAN benefits analysis. Volume 2: Final technical report

NASA Technical Reports Server (NTRS)

1972-01-01

Baseline data are considered for comparisons of the costs and benefits of the NASA structural analysis program and to determine impacts and benefits to current users. To develop this information, questionnaires were mailed to users. Personal and telephone interviews were made to solicit further information. The questions in the questionnaire and in the interview were related to benefits derived from the programs, areas of needed improvement, and applicable usage comments. The collected information was compiled and analyzed. Methodology, analyses, and results are presented. The information is applicable to issues preceding NASTRAN Level 15.

Parabolic Dish Solar Thermal Power Annual Program Review Proceedings

NASA Technical Reports Server (NTRS)

Holbeck, H. J.

1981-01-01

The development and testing of concentrators, receivers, and power conversion units are reported. System design and development for engineering experiments are described. Economic analysis and market assessments for advanced development activities are discussed. Technology development issues and application/user needs are highlighted.

The development of a dynamic software for the user interaction from the geographic information system environment with the database of the calibration site of the satellite remote electro-optic sensors

NASA Astrophysics Data System (ADS)

Zyelyk, Ya. I.; Semeniv, O. V.

2015-12-01

The state of the problem of the post-launch calibration of the satellite electro-optic remote sensors and its solutions in Ukraine is analyzed. The database is improved and dynamic services for user interaction with database from the environment of open geographical information system Quantum GIS for information support of calibration activities are created. A dynamic application under QGIS is developed, implementing these services in the direction of the possibility of data entering, editing and extraction from the database, using the technology of object-oriented programming and of modern complex program design patterns. The functional and algorithmic support of this dynamic software and its interface are developed.

AN ADA NAMELIST PACKAGE

NASA Technical Reports Server (NTRS)

Klumpp, A. R.

1994-01-01

The Ada Namelist Package, developed for the Ada programming language, enables a calling program to read and write FORTRAN-style namelist files. A namelist file consists of any number of assignment statements in any order. Features of the Ada Namelist Package are: the handling of any combination of user-defined types; the ability to read vectors, matrices, and slices of vectors and matrices; the handling of mismatches between variables in the namelist file and those in the programmed list of namelist variables; and the ability to avoid searching the entire input file for each variable. The principle user benefits of this software are the following: the ability to write namelist-readable files, the ability to detect most file errors in the initialization phase, a package organization that reduces the number of instantiated units to a few packages rather than to many subprograms, a reduced number of restrictions, and an increased execution speed. The Ada Namelist reads data from an input file into variables declared within a user program. It then writes data from the user program to an output file, printer, or display. The input file contains a sequence of assignment statements in arbitrary order. The output is in namelist-readable form. There is a one-to-one correspondence between namelist I/O statements executed in the user program and variables read or written. Nevertheless, in the input file, mismatches are allowed between assignment statements in the file and the namelist read procedure statements in the user program. The Ada Namelist Package itself is non-generic. However, it has a group of nested generic packages following the nongeneric opening portion. The opening portion declares a variety of useraccessible constants, variables and subprograms. The subprograms are procedures for initializing namelists for reading, reading and writing strings. The subprograms are also functions for analyzing the content of the current dataset and diagnosing errors. Two nested generic packages follow the opening portion. The first generic package contains procedures that read and write objects of scalar type. The second contains subprograms that read and write one and two-dimensional arrays whose components are of scalar type and whose indices are of either of the two discrete types (integer or enumeration). Subprograms in the second package also read and write vector and matrix slices. The Ada Namelist ASCII text files are available on a 360k 5.25" floppy disk written on an IBM PC/AT running under the PC DOS operating system. The largest subprogram in the package requires 150k of memory. The package was developed using VAX Ada v. 1.5 under DEC VMS v. 4.5. It should be portable to any validated Ada compiler. The software was developed in 1989, and is a copyrighted work with all copyright vested in NASA.

Automation of Data Analysis Programs Used in the Cryogenic Characterization of Superconducting Microwave Resonators

NASA Technical Reports Server (NTRS)

Creason, A. S.; Miranda, F. A.

1996-01-01

Knowledge of the microwave properties at cryogenic temperatures of components fabricated using High-Temperature-Superconductors (HTS) is useful in the design of HTS-based microwave circuits. Therefore, fast and reliable characterization techniques have been developed to study the aforementioned properties. In this paper, we discuss computer analysis techniques employed in the cryogenic characterization of HTS-based resonators. The revised data analysis process requires minimal user input. and organizes the data in a form that is easily accessible by the user for further examination. These programs retrieve data generated during the cryogenic characterization at microwave frequencies of HTS based resonators and use it to calculate parameters such as the loaded and unloaded quality factors (Q and Q(sub o), respectively), the resonant frequency (f(sub o)), and the coupling coefficient (k), which are important quantities in the evaluation of HTS resonators. While the data are also stored for further use, the programs allow the user to obtain a graphical representation of any of the measured parameters as a function of temperature soon after the completion of the cryogenic measurement cycle. Although these programs were developed to study planar HTS-based resonators operating in the reflection mode, they could also be used in the cryogenic characterization of two ports (i.e., reflection/transmission) resonators.

The First Seasat-A Industrial Users Workshop

NASA Technical Reports Server (NTRS)

Hicks, K. W.

1978-01-01

The purpose of this workshop was to begin the process of definition and development of the SEASAT-A Demonstration Program, leading to the implementation of a set of experiments which would begin during the latter part of 1978 following the launch of SEASAT-A (now scheduled for May 1978). NASA through the SEASAT-A program, has encouraged the planning of cooperative experiments by industry and government agencies that operate in areas of ocean activity that could benefit from improved measurements and forecasts of weather and ocean conditions. The objectives of these experiments are to: (1) evaluate the significance of SEASAT-A data to commercial user organizations; (2) assist in identifying those characteristics of follow-on systems that are important to industrial users; (3) obtain experimental evidence that could be used to refine estimates of the economic potential of an operational system; and (4) begin the technology transfer process to the industrial users.

HAL/S programmer's guide. [space shuttle flight software language

NASA Technical Reports Server (NTRS)

Newbold, P. M.; Hotz, R. L.

1974-01-01

HAL/S is a programming language developed to satisfy the flight software requirements for the space shuttle program. The user's guide explains pertinent language operating procedures and described the various HAL/S facilities for manipulating integer, scalar, vector, and matrix data types.

PARIS II: DESIGNING GREENER SOLVENTS

EPA Science Inventory

PARIS II (the program for assisting the replacement of industrial solvents, version II), developed at the USEPA, is a unique software tool that can be used for customizing the design of replacement solvents and for the formulation of new solvents. This program helps users avoid ...

Commuter choice primer : an employer's guide to implementing effective commuter choice programs

DOT National Transportation Integrated Search

2003-01-01

The Commuter Choice Primer is intended to be a concise, user-friendly reference guide for employers and transportation professionals to developing and implementing worksite commuter choice programs. It is available on-line in both HTML and PDF format...

Toward virtual anatomy: a stereoscopic 3-D interactive multimedia computer program for cranial osteology.

PubMed

Trelease, R B

1996-01-01

Advances in computer visualization and user interface technologies have enabled development of "virtual reality" programs that allow users to perceive and to interact with objects in artificial three-dimensional environments. Such technologies were used to create an image database and program for studying the human skull, a specimen that has become increasingly expensive and scarce. Stereoscopic image pairs of a museum-quality skull were digitized from multiple views. For each view, the stereo pairs were interlaced into a single, field-sequential stereoscopic picture using an image processing program. The resulting interlaced image files are organized in an interactive multimedia program. At run-time, gray-scale 3-D images are displayed on a large-screen computer monitor and observed through liquid-crystal shutter goggles. Users can then control the program and change views with a mouse and cursor to point-and-click on screen-level control words ("buttons"). For each view of the skull, an ID control button can be used to overlay pointers and captions for important structures. Pointing and clicking on "hidden buttons" overlying certain structures triggers digitized audio spoken word descriptions or mini lectures.

Reinventing User Applications for Mission Control

NASA Technical Reports Server (NTRS)

Trimble, Jay Phillip; Crocker, Alan R.

2010-01-01

In 2006, NASA Ames Research Center's (ARC) Intelligent Systems Division, and NASA Johnson Space Centers (JSC) Mission Operations Directorate (MOD) began a collaboration to move user applications for JSC's mission control center to a new software architecture, intended to replace the existing user applications being used for the Space Shuttle and the International Space Station. It must also carry NASA/JSC mission operations forward to the future, meeting the needs for NASA's exploration programs beyond low Earth orbit. Key requirements for the new architecture, called Mission Control Technologies (MCT) are that end users must be able to compose and build their own software displays without the need for programming, or direct support and approval from a platform services organization. Developers must be able to build MCT components using industry standard languages and tools. Each component of MCT must be interoperable with other components, regardless of what organization develops them. For platform service providers and MOD management, MCT must be cost effective, maintainable and evolvable. MCT software is built from components that are presented to users as composable user objects. A user object is an entity that represents a domain object such as a telemetry point, a command, a timeline, an activity, or a step in a procedure. User objects may be composed and reused, for example a telemetry point may be used in a traditional monitoring display, and that same telemetry user object may be composed into a procedure step. In either display, that same telemetry point may be shown in different views, such as a plot, an alpha numeric, or a meta-data view and those views may be changed live and in place. MCT presents users with a single unified user environment that contains all the objects required to perform applicable flight controller tasks, thus users do not have to use multiple applications, the traditional boundaries that exist between multiple heterogeneous applications disappear, leaving open the possibility of new operations concepts that are not constrained by the traditional applications paradigm.

Milwaukee County User-Side Subsidy Program : A Case Study

DOT National Transportation Integrated Search

1982-09-01

Milwaukee County, Wisconsin, instituted a user-side subsidy program in June 1978 for handicapped users of taxi and chair-car services. The program is funded entirely by county and state contributions. A distinctive feature of the program is that, unl...

General purpose optimization software for engineering design

NASA Technical Reports Server (NTRS)

Vanderplaats, G. N.

1990-01-01

The author has developed several general purpose optimization programs over the past twenty years. The earlier programs were developed as research codes and served that purpose reasonably well. However, in taking the formal step from research to industrial application programs, several important lessons have been learned. Among these are the importance of clear documentation, immediate user support, and consistent maintenance. Most important has been the issue of providing software that gives a good, or at least acceptable, design at minimum computational cost. Here, the basic issues developing optimization software for industrial applications are outlined and issues of convergence rate, reliability, and relative minima are discussed. Considerable feedback has been received from users, and new software is being developed to respond to identified needs. The basic capabilities of this software are outlined. A major motivation for the development of commercial grade software is ease of use and flexibility, and these issues are discussed with reference to general multidisciplinary applications. It is concluded that design productivity can be significantly enhanced by the more widespread use of optimization as an everyday design tool.

Agile IT: Thinking in User-Centric Models

NASA Astrophysics Data System (ADS)

Margaria, Tiziana; Steffen, Bernhard

We advocate a new teaching direction for modern CS curricula: extreme model-driven development (XMDD), a new development paradigm designed to continuously involve the customer/application expert throughout the whole systems' life cycle. Based on the `One-Thing Approach', which works by successively enriching and refining one single artifact, system development becomes in essence a user-centric orchestration of intuitive service functionality. XMDD differs radically from classical software development, which, in our opinion is no longer adequate for the bulk of application programming - in particular when it comes to heterogeneous, cross organizational systems which must adapt to rapidly changing market requirements. Thus there is a need for new curricula addressing this model-driven, lightweight, and cooperative development paradigm that puts the user process in the center of the development and the application expert in control of the process evolution.

NEFP Decision Process: "A Computer Simulation for Planning School Finance Programs." User Manual.

ERIC Educational Resources Information Center

Boardman, Gerald R.; And Others

The National Educational Finance Project has developed a computerized model designed to simulate the consequences of alternative decisions in regard to the financing of public elementary and secondary education. This manual describes a users orientation to that model. The model was designed as an operational prototype for States to use in a…

Second Eastern Regional Remote Sensing Applications Conference

NASA Technical Reports Server (NTRS)

Imhoff, M. L. (Editor); Witt, R. G. (Editor); Kugelmann, D. (Editor)

1981-01-01

Participants from state and local governments share experiences in remote sensing applications with one another and with users in the Federal government, universities, and the private sector during technical sessions and forums covering agriculture and forestry; land cover analysis and planning; surface mining and energy; data processing; water quality and the coastal zone; geographic information systems; and user development programs.

Project Scheduling Tool for Maintaining Capability Interdependencies and Defence Program Investment: A User’s Guide

DTIC Science & Technology

2014-09-01

The free, open-source Integrated Development Environment (IDE) NetBeans [11] was used in the creation of the Graphical User Interface (GUI) for the tool...Oracle Corporation (2013) NetBeans IDE 7.4, http://www.netbeans.org. 12. O’Shea, K., Pong, P. & Bulluss, G. (2012) Fit-for-Purpose Visualisation of

Addressing Earth Science Data Access Challenges through User Experience Research

NASA Astrophysics Data System (ADS)

Hemmings, S. N.; Banks, B.; Kendall, J.; Lee, C. M.; Irwin, D.; Toll, D. L.; Searby, N. D.

2013-12-01

The NASA Capacity Building Program (Earth Science Division, Applied Sciences Program) works to enhance end-user capabilities to employ Earth observation and Earth science (EO/ES) data in decision-making. Open data access and user-tailored data delivery strategies are critical elements towards this end. User Experience (UX) and User Interface (UI) research methods can offer important contributions towards addressing data access challenges, particularly at the interface of science application/product development and product transition to end-users. This presentation focuses on developing nation contexts and describes methods, results, and lessons learned from two recent UX/UI efforts conducted in collaboration with NASA: the SERVIRglobal.net redesign project and the U.S. Water Partnership (USWP) Portal development effort. SERVIR, a collaborative venture among NASA, USAID, and global partners, seeks to improve environmental management and climate change response by helping governments and other stakeholders integrate EO and geospatial technologies into decision-making. The USWP, a collaboration among U.S. public and private sectors, harnesses U.S.-based resources and expertise to address water challenges in developing nations. SERVIR's study, conducted from 2010-2012, assessed and tested user needs, preferences, and online experiences to generate a more user-friendly online data portal at SERVIRglobal.net. The portal provides a central access interface to data and products from SERVIR's network of hubs in East Africa, the Hindu Kush Himalayas, and Mesoamerica. The second study, conducted by the USWP Secretariat and funded by the U.S. Department of State, seeks to match U.S.-based water information resources with developing nation stakeholder needs. The USWP study utilizes a multi-pronged approach to identify key design requirements and to understand the existing water data portal landscape. Adopting UX methods allows data distributors to design customized UIs that help users find, interpret, and obtain appropriate content quickly. The data access challenge for both SERVIR and USWP consisted of organizing a wide range of content for their respective user bases, which are diverse, international, and in some cases loosely characterized. The UX/UI design approach generated profiles of prototypical users and corresponding task flows and organizational schemes for their preferred types of content. Wireframe acceptance testing by SERVIR helped elicit and optimize how users interact with the information online. These approaches produced customized UIs and knowledge management strategies to address the data access challenges faced by each user type. Both studies revealed critical considerations for user experiences in developing nations (e.g., low-bandwidth internet connections, rolling power outages at data storage or network centers). For SERVIR, these findings influenced not only the portal infrastructure; they also informed the transition of the platform to a Cloud-based model, as well as the development of custom data delivery tools such as SMS and other mobile solutions. While SERVIR's data access solutions are customized for the network's community of users, they are also standardized and interoperable according to GEO and ISO standards, providing a model for other initiatives such as the ongoing USWP Portal development effort.

Fusion programs in applied plasma physics

NASA Astrophysics Data System (ADS)

1992-07-01

The Applied Plasma Physics (APP) program at General Atomics (GA) described here includes four major elements: (1) Applied Plasma Physics Theory Program, (2) Alpha Particle Diagnostic, (3) Edge and Current Density Diagnostic, and (4) Fusion User Service Center (USC). The objective of the APP theoretical plasma physics research at GA is to support the DIII-D and other tokamak experiments and to significantly advance our ability to design a commercially-attractive fusion reactor. We categorize our efforts in three areas: magnetohydrodynamic (MHD) equilibria and stability; plasma transport with emphasis on H-mode, divertor, and boundary physics; and radio frequency (RF). The objective of the APP alpha particle diagnostic is to develop diagnostics of fast confined alpha particles using the interactions with the ablation cloud surrounding injected pellets and to develop diagnostic systems for reacting and ignited plasmas. The objective of the APP edge and current density diagnostic is to first develop a lithium beam diagnostic system for edge fluctuation studies on the Texas Experimental Tokamak (TEXT). The objective of the Fusion USC is to continue to provide maintenance and programming support to computer users in the GA fusion community. The detailed progress of each separate program covered in this report period is described.

Parallel Worlds: Agile and Waterfall Differences and Similarities

DTIC Science & Technology

2013-10-01

development model , and it is deliberately shorter than the Agile Overview as most readers are assumed to be from the Traditional World. For a more in...process of DODI 5000 does not forbid the iterative incremental software development model with frequent end-user interaction, it requires heroics on...added). Today, many of the DOD’s large IT programs therefore continue to adopt program structures and software development models closely

Using the FORTH Language to Develop an ICU Data Acquisition System

PubMed Central

Goldberg, Arthur; SooHoo, Spencer L.; Koerner, Spencer K.; Chang, Robert S. Y.

1980-01-01

This paper describes a powerful programming tool that should be considered as an alternative to the more conventional programming languages now in use for developing medical computer systems. Forth provides instantaneous response to user commands, rapid program execution and tremendous programming versatility. An operating system and a language in one carefully designed unit, Forth is well suited for developing data acquisition systems and for interfacing computers to other instruments. We present some of the general features of Forth and describe its use in implementing a data collection system for a Respiratory Intensive Care Unit (RICU).

Timeline analysis tools for law enforcement

NASA Astrophysics Data System (ADS)

Mucks, John

1997-02-01

The timeline analysis system (TAS) was developed by Rome Laboratory to assist intelligence analysts with the comprehension of large amounts of information. Under the TAS program data visualization, manipulation and reasoning tools were developed in close coordination with end users. The initial TAS prototype was developed for foreign command and control analysts at Space Command in Colorado Springs and was fielded there in 1989. The TAS prototype replaced manual paper timeline maintenance and analysis techniques and has become an integral part of Space Command's information infrastructure. TAS was designed to be domain independent and has been tailored and proliferated to a number of other users. The TAS program continues to evolve because of strong user support. User funded enhancements and Rome Lab funded technology upgrades have significantly enhanced TAS over the years and will continue to do so for the foreseeable future. TAS was recently provided to the New York State Police (NYSP) for evaluation using actual case data. Timeline analysis it turns out is a popular methodology used in law enforcement. The evaluation has led to a more comprehensive application and evaluation project sponsored by the National Institute of Justice (NIJ). This paper describes the capabilities of TAS, results of the initial NYSP evaluation and the plan for a more comprehensive NYSP evaluation.

[Evaluation of needle exchange program at Pereiro de Aguiar prison (Ourense, Spain): ten years of experience].

PubMed

Ferrer-Castro, V; Crespo-Leiro, M R; García-Marcos, L S; Pérez-Rivas, M; Alonso-Conde, A; García-Fernández, I; Lorenzo-Guisado, A; Sánchez-Fernández, J L; Seara-Selas, M; Sanjosé-Vallejo, R

2012-01-01

To evaluate the effectiveness of NEPs in prison to reduce the prevalence of infections associated with intravenous drug use and to know more about acceptance of the program by inmates and staff. cross-sectional observational study at baseline, 6 and 12 months and 10 years of program development. Interviews were conducted with program users, as well as random sample surveys of officials at the various cuts, and a random sample of inmates from the centre after10 years. Activity indicators of the program were recorded continuously, and the prevalence of HIV, HBV and HCV at baseline and after 10 years was evaluated. For the statistical analysis, the chi-square test was used with the Yates correction when necessary. In ten years we have supplied a total of 15,962 syringes to 429 users, (average 20.2 users/month), and 11,327 (70.9%) were returned. The prevalence of HIV infection decreased from 21% in 1999 to 8.5% in 2009, HCV prevalence from 40% to 26.1% (p <0.01), finding no significant differences in the prevalence of HBsAg +. Most of the inmates and civil servants believe that the program did not increase intravenous drug use and improves hygienic living conditions in prison. After ten years of development of the NEP, there was a significant decrease in the prevalence of HIV and HCV in the prison population at the centre, and the program is accepted as beneficial by most of the inmates and staff participating in the survey.

TADS--A CFD-Based Turbomachinery Analysis and Design System with GUI: User's Manual. 2.0

NASA Technical Reports Server (NTRS)

Koiro, M. J.; Myers, R. A.; Delaney, R. A.

1999-01-01

The primary objective of this study was the development of a Computational Fluid Dynamics (CFD) based turbomachinery airfoil analysis and design system, controlled by a Graphical User Interface (GUI). The computer codes resulting from this effort are referred to as TADS (Turbomachinery Analysis and Design System). This document is intended to serve as a User's Manual for the computer programs which comprise the TADS system, developed under Task 18 of NASA Contract NAS3-27350, ADPAC System Coupling to Blade Analysis & Design System GUI and Task 10 of NASA Contract NAS3-27394, ADPAC System Coupling to Blade Analysis & Design System GUI, Phase II-Loss, Design and, Multi-stage Analysis. TADS couples a throughflow solver (ADPAC) with a quasi-3D blade-to-blade solver (RVCQ3D) in an interactive package. Throughflow analysis and design capability was developed in ADPAC through the addition of blade force and blockage terms to the governing equations. A GUI was developed to simplify user input and automate the many tasks required to perform turbomachinery analysis and design. The coupling of the various programs was done in such a way that alternative solvers or grid generators could be easily incorporated into the TADS framework. Results of aerodynamic calculations using the TADS system are presented for a highly loaded fan, a compressor stator, a low speed turbine blade and a transonic turbine vane.

A Software Application for Assessing Readability in the Japanese EFL Context

ERIC Educational Resources Information Center

Ozasa, Toshiaki; Weir, George R. S.; Fukui, Masayasu

2010-01-01

We have been engaged in developing a readability index and its application software attuned for Japanese EFL learners. The index program, Ozasa-Fukui Year Level Program, Ver. 1.0, was used in developing the readability metric Ozasa-Fukui Year Level Index but tended to assume a high level of computer knowledge in its users. As a result, the…

Visions: Drug Education for Healthy 21st Century Living. An Infused K-12 Curriculum.

ERIC Educational Resources Information Center

Morton, Claudette, Ed.

This document completes a major goal of the Montana Rural Drug Free Schools Program, the development of an infused drug education curriculum appropriate for Montana's rural and small schools. These materials were first developed as a user-friendly computer program before this print form was produced, and the reader is encouraged to access the…

Space Station overall management approach for operations

NASA Technical Reports Server (NTRS)

Paules, G.

1986-01-01

An Operations Management Concept developed by NASA for its Space Station Program is discussed. The operational goals, themes, and design principles established during program development are summarized. The major operations functions are described, including: space systems operations, user support operations, prelaunch/postlanding operations, logistics support operations, market research, and cost/financial management. Strategic, tactical, and execution levels of operational decision-making are defined.

Developing and Evaluating an Interactive Multimedia Instructional Tool: Learning Outcomes and User Experiences of Optometry Students

ERIC Educational Resources Information Center

Wang, Ling

2008-01-01

This study developed an interactive multimedia-based software program for Optics instruction, which was expected to overcome the imperfection of traditional optical labs. The researcher evaluated the effectiveness of the program through an experimental study that compared the learning outcomes of the students who used and did not use the software.…

Busting out of crystallography's Sisyphean prison: from pencil and paper to structure solving at the press of a button: past, present and future of crystallographic software development, maintenance and distribution.

PubMed

Cranswick, Lachlan Michael David

2008-01-01

The history of crystallographic computing and use of crystallographic software is one which traces the escape from the drudgery of manual human calculations to a world where the user delegates most of the travail to electronic computers. In practice, this involves practising crystallographers communicating their thoughts to the crystallographic program authors, in the hope that new procedures will be implemented within their software. Against this background, the development of small-molecule single-crystal and powder diffraction software is traced. Starting with the analogue machines and the use of Hollerith tabulators of the late 1930's, it is shown that computing developments have been science led, with new technologies being harnessed to solve pressing crystallographic problems. The development of software is also traced, with a final caution that few of the computations now performed daily are really understood by the program users. Unless a sufficient body of people continues to dismantle and re-build programs, the knowledge encoded in the old programs will become as inaccessible as the knowledge of how to build the Great Pyramid at Giza.

Nuclear and Radiological Forensics and Attribution Overview

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, D K; Niemeyer, S

2005-11-04

The goal of the U.S. Department of Homeland Security (DHS) Nuclear and Radiological Forensics and Attribution Program is to develop the technical capability for the nation to rapidly, accurately, and credibly attribute the origins and pathways of interdicted or collected materials, intact nuclear devices, and radiological dispersal devices. A robust attribution capability contributes to threat assessment, prevention, and deterrence of nuclear terrorism; it also supports the Federal Bureau of Investigation (FBI) in its investigative mission to prevent and respond to nuclear terrorism. Development of the capability involves two major elements: (1) the ability to collect evidence and make forensic measurements,more » and (2) the ability to interpret the forensic data. The Program leverages the existing capability throughout the U.S. Department of Energy (DOE) national laboratory complex in a way that meets the requirements of the FBI and other government users. At the same time the capability is being developed, the Program also conducts investigations for a variety of sponsors using the current capability. The combination of operations and R&D in one program helps to ensure a strong linkage between the needs of the user community and the scientific development.« less

Two SPSS programs for interpreting multiple regression results.

PubMed

Lorenzo-Seva, Urbano; Ferrando, Pere J; Chico, Eliseo

2010-02-01

When multiple regression is used in explanation-oriented designs, it is very important to determine both the usefulness of the predictor variables and their relative importance. Standardized regression coefficients are routinely provided by commercial programs. However, they generally function rather poorly as indicators of relative importance, especially in the presence of substantially correlated predictors. We provide two user-friendly SPSS programs that implement currently recommended techniques and recent developments for assessing the relevance of the predictors. The programs also allow the user to take into account the effects of measurement error. The first program, MIMR-Corr.sps, uses a correlation matrix as input, whereas the second program, MIMR-Raw.sps, uses the raw data and computes bootstrap confidence intervals of different statistics. The SPSS syntax, a short manual, and data files related to this article are available as supplemental materials from http://brm.psychonomic-journals.org/content/supplemental.

Expanding roles in a library-based bioinformatics service program: a case study

PubMed Central

Li, Meng; Chen, Yi-Bu; Clintworth, William A

2013-01-01

Question: How can a library-based bioinformatics support program be implemented and expanded to continuously support the growing and changing needs of the research community? Setting: A program at a health sciences library serving a large academic medical center with a strong research focus is described. Methods: The bioinformatics service program was established at the Norris Medical Library in 2005. As part of program development, the library assessed users' bioinformatics needs, acquired additional funds, established and expanded service offerings, and explored additional roles in promoting on-campus collaboration. Results: Personnel and software have increased along with the number of registered software users and use of the provided services. Conclusion: With strategic efforts and persistent advocacy within the broader university environment, library-based bioinformatics service programs can become a key part of an institution's comprehensive solution to researchers' ever-increasing bioinformatics needs. PMID:24163602

SIPT: a seismic refraction inverse modeling program for timeshare terminal computer systems

USGS Publications Warehouse

Scott, James Henry

1977-01-01

SIPB is an interactive Fortran computer program that was developed for use with a timeshare computer system with program control information submitted from a remote terminal, and output data displayed on the terminal or printed on a line printer. The program is an upgraded version of FSIPI (Scott, Tibbetts, and Burdick, 1972) with several major improvements in addition to .its adaptation to timeshare operation. The most significant improvement was made in the procedure for handling data from in-line offset shotpoints beyond the end shotpoints of the geophone spread. The changes and improvements are described, user's instructions are outlined, examples of input and output data for a test problem are presented, and the Fortran program is listed in this report. An upgraded batch-mode program, SIPB, is available for users who do not have a timeshare computer system available (Scott, 1977).

SIPB: a seismic refraction inverse modeling program for batch computer systems

USGS Publications Warehouse

Scott, James Henry

1977-01-01

SIPB is an interactive Fortran computer program that was developed for use with a timeshare computer system with program control information submitted from a remote terminal, and output data displayed on the terminal or printed on a line printer. The program is an upgraded version of FSIPI (Scott, Tibbetts, and Burdick, 1972) with several major improvements in addition to .its adaptation to timeshare operation. The most significant improvement was made in the procedure for handling data from in-line offset shotpoints beyond the end shotpoints of the geophone spread. The changes and improvements are described, user's instructions are outlined, examples of input and output data for a test problem are presented, and the Fortran program is listed in this report. An upgraded batch-mode program, SIPB, is available for users who do not have a timeshare computer system available (Scott, 1977).

Automatic programming of simulation models

NASA Technical Reports Server (NTRS)

Schroer, Bernard J.; Tseng, Fan T.; Zhang, Shou X.; Dwan, Wen S.

1988-01-01

The objective of automatic programming is to improve the overall environment for describing the program. This improved environment is realized by a reduction in the amount of detail that the programmer needs to know and is exposed to. Furthermore, this improved environment is achieved by a specification language that is more natural to the user's problem domain and to the user's way of thinking and looking at the problem. The goal of this research is to apply the concepts of automatic programming (AP) to modeling discrete event simulation system. Specific emphasis is on the design and development of simulation tools to assist the modeler define or construct a model of the system and to then automatically write the corresponding simulation code in the target simulation language, GPSS/PC. A related goal is to evaluate the feasibility of various languages for constructing automatic programming simulation tools.

Internet Technology in Magnetic Resonance: A Common Gateway Interface Program for the World-Wide Web NMR Spectrometer

PubMed

Buszko; Buszko; Wang

1998-04-01

A custom-written Common Gateway Interface (CGI) program for remote control of an NMR spectrometer using a World Wide Web browser has been described. The program, running on a UNIX workstation, uses multiple processes to handle concurrent tasks of interacting with the user and with the spectrometer. The program's parent process communicates with the browser and sends out commands to the spectrometer; the child process is mainly responsible for data acquisition. Communication between the processes is via the shared memory mechanism. The WWW pages that have been developed for the system make use of the frames feature of web browsers. The CGI program provides an intuitive user interface to the NMR spectrometer, making, in effect, a complex system an easy-to-use Web appliance. Copyright 1998 Academic Press.

24 CFR 200.934 - User fee system for the technical suitability of products program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Minimum Property... section establishes fee requirements for the issuance of Structural Engineering Bulletins (SEBs), Mechanical Engineering Bulletins (MEBs), Truss Connector Bulletins (TCBs), Area Letters of Acceptance (ALAs...

Project Evolve User-Adopter Manual.

ERIC Educational Resources Information Center

Joiner, Lee M.

An adult basic education (ABE) program for mentally retarded young adults between the ages of 14 and 26 years, Project Evolve can provide education agencies for educationally handicapped children with detailed information concerning an innovative program. The manual format was developed through interviews with professional educators concerning the…

Teaching Reprint File Management: Basic Principles and Software Programs.

ERIC Educational Resources Information Center

Wood, Elizabeth H.

1989-01-01

Describes a workshop for teaching library users how to manage reprint files which was developed at the University of Southern California Norris Medical Library. Software programs designed for this purpose are suggested, and a sidebar lists software features to consider. (eight references) (MES)

DYNALIST II : A Computer Program for Stability and Dynamic Response Analysis of Rail Vehicle Systems : Volume 4. Revised User's Manual.

DOT National Transportation Integrated Search

1976-07-01

The Federal Railroad Administration (FRA) is sponsoring research, development, and demonstration programs to provide improved safety, performance, speed, reliability, and maintainability of rail transportation systems at reduced life-cycle costs. A m...

Managing complex processing of medical image sequences by program supervision techniques

NASA Astrophysics Data System (ADS)

Crubezy, Monica; Aubry, Florent; Moisan, Sabine; Chameroy, Virginie; Thonnat, Monique; Di Paola, Robert

1997-05-01

Our objective is to offer clinicians wider access to evolving medical image processing (MIP) techniques, crucial to improve assessment and quantification of physiological processes, but difficult to handle for non-specialists in MIP. Based on artificial intelligence techniques, our approach consists in the development of a knowledge-based program supervision system, automating the management of MIP libraries. It comprises a library of programs, a knowledge base capturing the expertise about programs and data and a supervision engine. It selects, organizes and executes the appropriate MIP programs given a goal to achieve and a data set, with dynamic feedback based on the results obtained. It also advises users in the development of new procedures chaining MIP programs.. We have experimented the approach for an application of factor analysis of medical image sequences as a means of predicting the response of osteosarcoma to chemotherapy, with both MRI and NM dynamic image sequences. As a result our program supervision system frees clinical end-users from performing tasks outside their competence, permitting them to concentrate on clinical issues. Therefore our approach enables a better exploitation of possibilities offered by MIP and higher quality results, both in terms of robustness and reliability.

Extravehicular mobility unit thermal simulator

NASA Technical Reports Server (NTRS)

Hixon, C. W.; Phillips, M. A.

1973-01-01

The analytical methods, thermal model, and user's instructions for the SIM bay extravehicular mobility unit (EMU) routine are presented. This digital computer program was developed for detailed thermal performance predictions of the crewman performing a command module extravehicular activity during transearth coast. It accounts for conductive, convective, and radiative heat transfer as well as fluid flow and associated flow control components. The program is a derivative of the Apollo lunar surface EMU digital simulator. It has the operational flexibility to accept card or magnetic tape for both the input data and program logic. Output can be tabular and/or plotted and the mission simulation can be stopped and restarted at the discretion of the user. The program was developed for the NASA-JSC Univac 1108 computer system and several of the capabilities represent utilization of unique features of that system. Analytical methods used in the computer routine are based on finite difference approximations to differential heat and mass balance equations which account for temperature or time dependent thermo-physical properties.

Mission Applications Support at NASA: The Proposal Surface Water and Ocean Topography Mission

NASA Astrophysics Data System (ADS)

Srinivasan, Margaret; Peterson, Craig; Callahan, Phil

2013-09-01

The NASA Applied Sciences Program is actively supporting an agency-wide effort to formalize a mission-level data applications approach. The program goal is to engage early-phase NASA Earth satellite mission project teams with applied science representation in the flight mission planning process. The end objective is to "to engage applications-oriented users and organizations early in the satellite mission lifecycle to enable them to envision possible applications and integrate end-user needs into satellite mission planning as a way to increase the benefits to the nation."Two mission applications representatives have been selected for each early phase Tier 2 mission, including the Surface Water and Ocean Topography (SWOT) mission concept. These representatives are tasked with identifying and organizing the applications communities and developing and promoting a process for the mission to optimize the reach of existing applications efforts in order to enhance the applications value of the missions. An early project-level awareness of mission planning decisions that may increase or decrease the utility of data products to diverse user and potential user communities (communities of practice and communities of potential, respectively) has high value and potential return to the mission and to the users.Successful strategies to enhance science and practical applications of projected SWOT data streams will require engaging with and facilitating between representatives in the science, societal applications, and mission planning communities.Some of the elements of this program include:• Identify early adopters of data products• Coordinate applications team, including;Project Scientist, Payload Scientist, ProjectManager, data processing lead• Describe mission and products sufficiently inearly stage of development to effectively incorporate all potential usersProducts and activities resulting from this effort will include (but are not limited to); workshops, workshop summaries, web pages, email lists of interested users/scientists, an Applications Plan, printed materials (posters, brochures) and participation in key meetings.

An interactive program for computer-aided map design, display, and query: EMAPKGS2

USGS Publications Warehouse

Pouch, G.W.

1997-01-01

EMAPKGS2 is a user-friendly, PC-based electronic mapping tool for use in hydrogeologic exploration and appraisal. EMAPKGS2 allows the analyst to construct maps interactively from data stored in a relational database, perform point-oriented spatial queries such as locating all wells within a specified radius, perform geographic overlays, and export the data to other programs for further analysis. EMAPKGS2 runs under Microsoft?? Windows??? 3.1 and compatible operating systems. EMAPKGS2 is a public domain program available from the Kansas Geological Survey. EMAPKGS2 is the centerpiece of WHEAT, the Windows-based Hydrogeologic Exploration and Appraisal Toolkit, a suite of user-friendly Microsoft?? Windows??? programs for natural resource exploration and management. The principal goals in development of WHEAT have been ease of use, hardware independence, low cost, and end-user extensibility. WHEAT'S native data format is a Microsoft?? Access?? database. WHEAT stores a feature's geographic coordinates as attributes so they can be accessed easily by the user. The WHEAT programs are designed to be used in conjunction with other Microsoft?? Windows??? software to allow the natural resource scientist to perform work easily and effectively. WHEAT and EMAPKGS have been used at several of Kansas' Groundwater Management Districts and the Kansas Geological Survey on groundwater management operations, groundwater modeling projects, and geologic exploration projects. ?? 1997 Elsevier Science Ltd.

The Department of Defense and the Power of Cloud Computing: Weighing Acceptable Cost Versus Acceptable Risk

DTIC Science & Technology

2016-04-01

the DOD will put DOD systems and data at a risk level comparable to that of their neighbors in the cloud. Just as a user browses a Web page on the...proxy servers for controlling user access to Web pages, and large-scale storage for data management. Each of these devices allows access to the...user to develop applications. Acunetics.com describes Web applications as “computer programs allowing Website visitors to submit and retrieve data

ASV3 dial-in interface recommendation for the Repository Based Software Engineering (RBSE) program

NASA Technical Reports Server (NTRS)

1992-01-01

The purpose of this report is to provide insight into the approach and design of the Cooperative User Interface (CUI). The CUI is being developed based on Hypercard technology and will provide the same look and feel as is provided by the NASA Electronic Library System (NELS) X-Window interface. The interaction between the user and ASCII-LIB is presented as well as the set of Hypercard Cards with which the user will work.

Artificial Intelligence for VHSIC Systems Design (AIVD) User Reference Manual

DTIC Science & Technology

1988-12-01

The goal of this program was to develop prototype tools which would use artificial intelligence techniques to extend the Architecture Design and Assessment (ADAS) software capabilities. These techniques were applied in a number of ways to increase the productivity of ADAS users. AIM will reduce the amount of time spent on tedious, negative, and error-prone steps. It will also provide f documentation that will assist users in varifying that the models they build are correct Finally, AIVD will help make ADAS models more reusable.

Moessfit. A free Mössbauer fitting program

NASA Astrophysics Data System (ADS)

Kamusella, Sirko; Klauss, Hans-Henning

2016-12-01

A free data analysis program for Mössbauer spectroscopy was developed to solve commonly faced problems such as simultaneous fitting of multiple data sets, Maximum Entropy Method and a proper error estimation. The program is written in C++ using the Qt application framework and the Gnu Scientific Library. Moessfit makes use of multithreading to reasonably apply the multi core CPU capacities of modern PC. The whole fit is specified in a text input file issued to simplify work flow for the user and provide a simple start in the Mössbauer data analysis for beginners. However, the possibility to define arbitrary parameter dependencies and distributions as well as relaxation spectra makes Moessfit interesting for advanced user as well.

Substance Abuse Disorders Treatment in El Salvador: Analysis of Policy-Making-Related Failure

PubMed Central

Dickson-Gómez, Julia

2016-01-01

Illicit drug use and substance abuse disorders have increased dramatically in developing countries during recent decades. Sadly, treatment for people diagnosed as manifesting and/or attributed with substance abuse disorders in developing countries is usually inadequate to meet demand, not evidence based, and of poor quality. In response, international health organizations have developed best-practice guidelines for substance user treatment in developing countries, although little research has evaluated their implementation. This opinion piece will examine one such effort to improve substance user treatment in El Salvador. It will be argued that the program failed (2007–2008) because of a lack of political will by the Salvadoran government through their Ministry of Health to effectively supervise, monitor, and subsidize substance user treatment. PMID:23186469

EVALUE : a computer program for evaluating investments in forest products industries

Treesearch

Peter J. Ince; Philip H. Steele

1980-01-01

EVALUE, a FORTRAN program, was developed to provide a framework for cash flow analysis of investment opportunities. EVALUE was designed to assist researchers in evaluating investment feasibility of new technology or new manufacturing processes. This report serves as user documentation for the EVALUE program. EVALUE is briefly described and notes on preparation of a...

The Interior Design Simulator. Courseware Evaluation for Vocational and Technical Education.

ERIC Educational Resources Information Center

Worts, Nancy; And Others

This courseware evaluation rates the Interior Design Simulator program developed by Orange Juice Software Systems. (This program--not contained in this document--allows the user to design a room of any shape with maximum dimensions of 14 x 26 feet.) Part A describes the program in terms of subject area (furniture arrangement) and hardware…

Computer program and user documentation medical data tape retrieval system

NASA Technical Reports Server (NTRS)

Anderson, J.

1971-01-01

This volume provides several levels of documentation for the program module of the NASA medical directorate mini-computer storage and retrieval system. A biomedical information system overview describes some of the reasons for the development of the mini-computer storage and retrieval system. It briefly outlines all of the program modules which constitute the system.

Developing Student Programming and Problem-Solving Skills with Visual Basic

ERIC Educational Resources Information Center

Siegle, Del

2009-01-01

Although most computer users will never need to write a computer program, many students enjoy the challenge of creating one. Computer programming enhances students' problem solving by forcing students to break a problem into its component pieces and reassemble it in a generic format that can be understood by a nonsentient entity. It promotes…

The Next Generation of Ground Operations Command and Control; Scripting in C no. and Visual Basic

NASA Technical Reports Server (NTRS)

Ritter, George; Pedoto, Ramon

2010-01-01

Scripting languages have become a common method for implementing command and control solutions in space ground operations. The Systems Test and Operations Language (STOL), the Huntsville Operations Support Center (HOSC) Scripting Language Processor (SLP), and the Spacecraft Control Language (SCL) offer script-commands that wrap tedious operations tasks into single calls. Since script-commands are interpreted, they also offer a certain amount of hands-on control that is highly valued in space ground operations. Although compiled programs seem to be unsuited for interactive user control and are more complex to develop, Marshall Space flight Center (MSFC) has developed a product called the Enhanced and Redesign Scripting (ERS) that makes use of the graphical and logical richness of a programming language while offering the hands-on and ease of control of a scripting language. ERS is currently used by the International Space Station (ISS) Payload Operations Integration Center (POIC) Cadre team members. ERS integrates spacecraft command mnemonics, telemetry measurements, and command and telemetry control procedures into a standard programming language, while making use of Microsoft's Visual Studio for developing Visual Basic (VB) or C# ground operations procedures. ERS also allows for script-style user control during procedure execution using a robust graphical user input and output feature. The availability of VB and C# programmers, and the richness of the languages and their development environment, has allowed ERS to lower our "script" development time and maintenance costs at the Marshall POIC.

A MATLAB®-based program for 3D visualization of stratigraphic setting and subsidence evolution of sedimentary basins: example application to the Vienna Basin

NASA Astrophysics Data System (ADS)

Lee, Eun Young; Novotny, Johannes; Wagreich, Michael

2015-04-01

In recent years, 3D visualization of sedimentary basins has become increasingly popular. Stratigraphic and structural mapping is highly important to understand the internal setting of sedimentary basins. And subsequent subsidence analysis provides significant insights for basin evolution. This study focused on developing a simple and user-friendly program which allows geologists to analyze and model sedimentary basin data. The developed program is aimed at stratigraphic and subsidence modelling of sedimentary basins from wells or stratigraphic profile data. This program is mainly based on two numerical methods; surface interpolation and subsidence analysis. For surface visualization four different interpolation techniques (Linear, Natural, Cubic Spline, and Thin-Plate Spline) are provided in this program. The subsidence analysis consists of decompaction and backstripping techniques. The numerical methods are computed in MATLAB® which is a multi-paradigm numerical computing environment used extensively in academic, research, and industrial fields. This program consists of five main processing steps; 1) setup (study area and stratigraphic units), 2) loading of well data, 3) stratigraphic modelling (depth distribution and isopach plots), 4) subsidence parameter input, and 5) subsidence modelling (subsided depth and subsidence rate plots). The graphical user interface intuitively guides users through all process stages and provides tools to analyse and export the results. Interpolation and subsidence results are cached to minimize redundant computations and improve the interactivity of the program. All 2D and 3D visualizations are created by using MATLAB plotting functions, which enables users to fine-tune the visualization results using the full range of available plot options in MATLAB. All functions of this program are illustrated with a case study of Miocene sediments in the Vienna Basin. The basin is an ideal place to test this program, because sufficient data is available to analyse and model stratigraphic setting and subsidence evolution of the basin. The study area covers approximately 1200 km2 including 110 data points in the central part of the Vienna Basin.

Techniques to Aid DoD Writers in Developing User-Oriented Directives

DTIC Science & Technology

1990-09-01

received from sales of the recovered materials, expenses incurred in this program, the number and costs of projects for environmental improvement and...components for managing acquisition programs. a. Program direction and guidance for ACAT I programs, to include all matters relating to cost , schedule...documented needs and unfunded ownership costs requirements * Operational deficiencies identified must first be Proposed exit criteria tnat must be

Development of an integrated e-health tool for people with, or at high risk of, cardiovascular disease: The Consumer Navigation of Electronic Cardiovascular Tools (CONNECT) web application.

PubMed

Neubeck, Lis; Coorey, Genevieve; Peiris, David; Mulley, John; Heeley, Emma; Hersch, Fred; Redfern, Julie

2016-12-01

Cardiovascular disease is the leading killer globally and secondary prevention substantially reduces risk. Uptake of, and adherence to, face-to-face preventive programs is often low. Alternative models of care are exploiting the prominence of technology in daily life to facilitate lifestyle behavior change. To inform the development of a web-based application integrated with the primary care electronic health record, we undertook a collaborative user-centered design process to develop a consumer-focused e-health tool for cardiovascular disease risk reduction. A four-phase iterative process involved ten multidisciplinary clinicians and academics (primary care physician, nurses and allied health professionals), two design consultants, one graphic designer, three software developers and fourteen proposed end-users. This 18-month process involved, (1) defining the target audience and needs, (2) pilot testing and refinement, (3) software development including validation and testing the algorithm, (4) user acceptance testing and beta testing. From this process, researchers were able to better understand end-user needs and preferences, thereby improving and enriching the increasingly detailed system designs and prototypes for a mobile responsive web application. We reviewed 14 relevant applications/websites and sixteen observational and interventional studies to derive a set of core components and ideal features for the system. These included the need for interactivity, visual appeal, credible health information, virtual rewards, and emotional and physical support. The features identified as essential were: (i) both mobile and web-enabled 'apps', (ii) an emphasis on medication management, (iii) a strong psychosocial support component. Subsequent workshops (n=6; 2×1.5h) informed the development of functionality and lo-fidelity sketches of application interfaces. These ideas were next tested in consumer focus groups (n=9; 3×1.5h). Specifications for the application were refined from this feedback and a graphic designer iteratively developed the interface. Concurrently, the electronic health record was linked to the consumer portal. A written description of the final algorithms for all decisions and outputs was provided to software programmers. These algorithmic outputs to the app were first validated against those obtained from an independently programmed version in STATA 11. User acceptance testing (n=5, 2×1.0h) and beta testing revealed technical bugs and interface concerns across commonly-used web browsers and smartphones. These were resolved and re-tested until functionality was optimized. End-users of a cardiovascular disease prevention program have complex needs. A user-centered design approach aided the integration of these needs into the concept, specifications, development and refinement of a responsive web application for risk factor reduction and disease prevention. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

75 FR 52976 - Issuance of Revised Users' Manual for Commission Mediation Program for Investigations Under...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

... INTERNATIONAL TRADE COMMISSION Issuance of Revised Users' Manual for Commission Mediation Program... 65615 (Nov. 8, 2008). The Commission has determined to issue a revised Users' Manual for its program for the mediation of investigations under section 337 of the Tariff Act of 1930. The revised Users' Manual...

Accessorizing Building Science – A Web Platform to Support Multiple Market Transformation Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Madison, Michael C.; Antonopoulos, Chrissi A.; Dowson, Scott T.

As demand for improved energy efficiency in homes increases, builders need information on the latest findings in building science, rapidly ramping-up energy codes, and technical requirements for labeling programs. The Building America Solution Center is a Department of Energy (DOE) website containing hundreds of expert guides designed to help residential builders install efficiency measures in new and existing homes. Builders can package measures with other media for customized content. Website content provides technical support to market transformation programs such as ENERGY STAR and has been cloned and adapted to provide content for the Better Buildings Residential Program. The Solution Centermore » uses the Drupal open source content management platform to combine a variety of media in an interactive manner to make information easily accessible. Developers designed a unique taxonomy to organize and manage content. That taxonomy was translated into web-based modules that allow users to rapidly traverse structured content with related topics, and media. We will present information on the current design of the Solution Center and the underlying technology used to manage the content. The paper will explore development of features, such as “Field Kits” that allow users to bundle and save content for quick access, along with the ability to export PDF versions of content. Finally, we will discuss development of an Android based mobile application, and a visualization tool for interacting with Building Science Publications that allows the user to dynamically search the entire Building America Library.« less

Lunar Quest in Second Life, Lunar Exploration Island, Phase II

NASA Astrophysics Data System (ADS)

Ireton, F. M.; Day, B. H.; Mitchell, B.; Hsu, B. C.

2010-12-01

Linden Lab’s Second Life is a virtual 3D metaverse created by users. At any one time there may be 40,000-50,000 users on line. Users develop a persona and are seen on screen as a human figure or avatar. Avatars move through Second Life by walking, flying, or teleporting. Users form communities or groups of mutual interest such as music, computer graphics, and education. These groups communicate via e-mail, voice, and text within Second Life. Information on downloading the Second Life browser and joining can be found on the Second Life website: www.secondlife.com. This poster details Phase II in the development of Lunar Exploration Island (LEI) located in Second Life. Phase I LEI highlighted NASA’s LRO/LCROSS mission. Avatars enter LEI via teleportation arriving at a hall of flight housing interactive exhibits on the LRO/ LCROSS missions including full size models of the two spacecraft and launch vehicle. Storyboards with information about the missions interpret the exhibits while links to external websites provide further information on the mission, both spacecraft’s instrument suites, and related EPO. Other lunar related activities such as My Moon and NLSI EPO programs. A special exhibit was designed for International Observe the Moon Night activities with links to websites for further information. The sim includes several sites for meetings, a conference stage to host talks, and a screen for viewing NASATV coverage of mission and other televised events. In Phase II exhibits are updated to reflect on-going lunar exploration highlights, discoveries, and future missions. A new section of LEI has been developed to showcase NASA’s Lunar Quest program. A new exhibit hall with Lunar Quest information has been designed and is being populated with Lunar Quest information, spacecraft models (LADEE is in place) and kiosks. A two stage interactive demonstration illustrates lunar phases with static and 3-D stations. As NASA’s Lunar Quest program matures further exhibits are planned. One proposal is to develop a teacher-training program to acquaint teachers with the Lunar Quest program and to provide resources.

Development of Alabama Resources Information System (ARIS)

NASA Technical Reports Server (NTRS)

Herring, B. E.; Vachon, R. I.

1976-01-01

A formal, organized set of information concerning the development status of the Alabama Resources Information System (ARIS) as of September 1976 is provided. A series of computer source language programs, and flow charts related to each of the computer programs to provide greater ease in performing future change are presented. Listings of the variable names, and their meanings, used in the various source code programs, and copies of the various user manuals which were prepared through this time are given.

FLAPS (Fatigue Life Analysis Programs): Computer Programs to Predict Cyclic Life Using the Total Strain Version of Strainrange Partitioning and Other Life Prediction Methods. Users' Manual and Example Problems, Version 1.0

NASA Technical Reports Server (NTRS)

Arya, Vinod K.; Halford, Gary R. (Technical Monitor)

2003-01-01

This manual presents computer programs FLAPS for characterizing and predicting fatigue and creep-fatigue resistance of metallic materials in the high-temperature, long-life regime for isothermal and nonisothermal fatigue. The programs use the Total Strain version of Strainrange Partitioning (TS-SRP), and several other life prediction methods described in this manual. The user should be thoroughly familiar with the TS-SRP and these life prediction methods before attempting to use any of these programs. Improper understanding can lead to incorrect use of the method and erroneous life predictions. An extensive database has also been developed in a parallel effort. The database is probably the largest source of high-temperature, creep-fatigue test data available in the public domain and can be used with other life-prediction methods as well. This users' manual, software, and database are all in the public domain and can be obtained by contacting the author. The Compact Disk (CD) accompanying this manual contains an executable file for the FLAPS program, two datasets required for the example problems in the manual, and the creep-fatigue data in a format compatible with these programs.

Detailed requirements document for the integrated structural analysis system, phase B

NASA Technical Reports Server (NTRS)

Rainey, J. A.

1976-01-01

The requirements are defined for a software system entitled integrated Structural Analysis System (ISAS) Phase B which is being developed to provide the user with a tool by which a complete and detailed analysis of a complex structural system can be performed. This software system will allow for automated interface with numerous structural analysis batch programs and for user interaction in the creation, selection, and validation of data. This system will include modifications to the 4 functions developed for ISAS, and the development of 25 new functions. The new functions are described.

Analysis of satellite servicing cost benefits

NASA Technical Reports Server (NTRS)

Builteman, H. O.

1982-01-01

Under the auspices of NASA/JSC a methodology was developed to estimate the value of satellite servicing to the user community. Time and funding precluded the development of an exhaustive computer model; instead, the concept of Design Reference Missions was involved. In this approach, three space programs were analyzed for various levels of servicing. The programs selected fall into broad categories which include 80 to 90% of the missions planned between now and the end of the century. Of necessity, the extrapolation of the three program analyses to the user community as a whole depends on an average mission model and equivalency projections. The value of the estimated cost benefits based on this approach depends largely on how well the equivalency assumptions and the mission model match the real world. A careful definition of all assumptions permits the analysis to be extended to conditions beyond the scope of this study.

User's manual: Subsonic/supersonic advanced panel pilot code

NASA Technical Reports Server (NTRS)

Moran, J.; Tinoco, E. N.; Johnson, F. T.

1978-01-01

Sufficient instructions for running the subsonic/supersonic advanced panel pilot code were developed. This software was developed as a vehicle for numerical experimentation and it should not be construed to represent a finished production program. The pilot code is based on a higher order panel method using linearly varying source and quadratically varying doublet distributions for computing both linearized supersonic and subsonic flow over arbitrary wings and bodies. This user's manual contains complete input and output descriptions. A brief description of the method is given as well as practical instructions for proper configurations modeling. Computed results are also included to demonstrate some of the capabilities of the pilot code. The computer program is written in FORTRAN IV for the SCOPE 3.4.4 operations system of the Ames CDC 7600 computer. The program uses overlay structure and thirteen disk files, and it requires approximately 132000 (Octal) central memory words.

The Application of Remotely Sensed Data and Models to Benefit Conservation and Restoration Along the Northern Gulf of Mexico Coast

NASA Astrophysics Data System (ADS)

Quattrochi, D. A.; Estes, M. G., Jr.; Al-Hamdan, M. Z.; Thom, R.; Woodruff, D.; Judd, C.; Ellis, J. T.; Swann, R.; Johnson, H., III

2010-12-01

New data, tools, and capabilities for decision making are significant needs in the northern Gulf of Mexico and other coastal areas. The goal of this project is to support NASA’s Earth Science Mission Directorate and its Applied Science Program and the Gulf of Mexico Alliance by producing and providing NASA data and products that will benefit decision making by coastal resource managers and other end users in the Gulf region. Data and research products are being developed to assist coastal resource managers adapt and plan for changing conditions by evaluating how climate changes and urban expansion will impact land cover/land use (LCLU), hydrodynamics, water properties, and shallow water habitats; to identify priority areas for conservation and restoration; and to distribute datasets to end-users and facilitating user interaction with models. The proposed host sites for data products are NOAA’s National Coastal Data Development Center Regional Ecosystem Data Management, and Mississippi-Alabama Habitat Database. Tools will be available on the Gulf of Mexico Regional Collaborative website with links to data portals to enable end users to employ models and datasets to develop and evaluate LCLU and climate scenarios of particular interest. These data will benefit the Mobile Bay National Estuary Program in ongoing efforts to protect and restore the Fish River watershed and around Weeks Bay National Estuarine Research Reserve. The usefulness of data products and tools will be demonstrated at an end-user workshop.

The Application of Remotely Sensed Data and Models to Benefit Conservation and Restoration Along the Northern Gulf of Mexico Coast

NASA Technical Reports Server (NTRS)

Quattrochi, Dale; Estes, Maurice, Jr.; Al-Hamdan, Mohammad; Thom, Ron; Woodruff, Dana; Judd, Chaeli; Ellis, Jean; Swann, Roberta; Johnson, Hoyt, III

2010-01-01

New data, tools, and capabilities for decision making are significant needs in the northern Gulf of Mexico and other coastal areas. The goal of this project is to support NASA s Earth Science Mission Directorate and its Applied Science Program and the Gulf of Mexico Alliance by producing and providing NASA data and products that will benefit decision making by coastal resource managers and other end users in the Gulf region. Data and research products are being developed to assist coastal resource managers adapt and plan for changing conditions by evaluating how climate changes and urban expansion will impact land cover/land use (LCLU), hydrodynamics, water properties, and shallow water habitats; to identify priority areas for conservation and restoration; and to distribute datasets to end-users and facilitating user interaction with models. The proposed host sites for data products are NOAA s National Coastal Data Development Center Regional Ecosystem Data Management, and Mississippi-Alabama Habitat Database. Tools will be available on the Gulf of Mexico Regional Collaborative website with links to data portals to enable end users to employ models and datasets to develop and evaluate LCLU and climate scenarios of particular interest. These data will benefit the Mobile Bay National Estuary Program in ongoing efforts to protect and restore the Fish River watershed and around Weeks Bay National Estuarine Research Reserve. The usefulness of data products and tools will be demonstrated at an end-user workshop.

Adverse outcome pathway (AOP) development and evaluation ...

EPA Pesticide Factsheets

The Adverse Outcome Pathway provides a construct for assembling mechanistic information at different levels of biological organization in a form designed to support regulatory decision making. In particular, it frames the link between molecular and cellular events that can be measured in high throughput toxicity testing and the organism or population-level events that are commonly relevant in defining risk. Recognizing the importance of this emerging framework, the Organisation for Economic Co-operation and Development (OECD) launched a program to support the development, documentation and consideration of AOPs by the international community in 2012 (http://www.oecd.org/chemicalsafety/testing/adverse-outcome-pathways-molecular-screening-and-toxicogenomics.htm). In 2014, a handbook (https://aopkb.org/common/AOP_Handbook.pdf) was developed to guide users in the documentation and evaluation of AOPs and their entry into an official knowledgebase. The handbook draws on longstanding experience in consideration of mechanistic data (e.g., mode of action analysis) to inform risk assessment. To further assist users, a training program was developed by members of the OECD Extended Advisory Group to teach users the basic principles of AOP development and the best practices as outlined in the OECD AOP handbook. Training sessions began in early 2015, and this course will provide training for interested SOT scientists. Following this course, all participants will be familiar w