A Randomized Clinical Trial of a Telephone Depression Intervention to Reduce Employee Presenteeism and Absenteeism

PubMed Central

Lerner, Debra; Adler, David A.; Rogers, William H.; Chang, Hong; Greenhill, Annabel; Cymerman, Elina; Azocar, Francisca

2015-01-01

Objectives The study tested an intervention aimed at improving work functioning among middle-aged and older adults with depression and work limitations. Methods A randomized clinical trial allocated an initial sample of 431 eligible employed adults (age ≥45) to a work-focused intervention (WFI) or usual care. Inclusion criteria were depression as measured by the Patient Health Questionnaire–9 (PHQ-9) and at-work limitations indicated by a productivity loss score ≥5% on the Work Limitations Questionnaire (WLQ). Study sites included 19 employers and five related organizations. Telephone-based counseling provided three integrated modalities: care coordination, cognitive-behavioral therapy strategy development, and work coaching and modification. Effectiveness (change in productivity loss scores from preintervention to four months postintervention) was tested with mixed models adjusted for confounders. Secondary outcomes included change in WLQ work performance scales, self-reported absences, and depression. Results Of 1,227 eligible employees (7% of screened), 431 (35%) enrolled and 380 completed the study (12% attrition). At-work productivity loss improved 44% in the WFI group versus 13% in usual care (difference in change, p<.001). WFI group scores on the four WLQ scales improved 44% to 47%, significantly better than in usual care (p<.001 for each scale). Absence days declined by 53% in the WFI group versus 13% in usual care (difference in change, p<.001). Mean PHQ-9 depression symptom severity scores declined 51% for WFI versus 26% for usual care (difference in change, p<.001). Conclusions The WFI was more effective than usual care at four-month follow-up. Given increasing efforts to provide more patient-centered, value-based care, the WFI could be an important resource. PMID:25726984

Marketing depression care management to employers: design of a randomized controlled trial.

PubMed

Rost, Kathryn M; Marshall, Donna

2010-03-16

Randomized trials demonstrate that depression care management can improve clinical and work outcomes sufficiently for selected employers to realize a return on investment. Employers can now purchase depression products that provide depression care management, defined as employee screening, education, monitoring, and clinician feedback for all depressed employees. We developed an intervention to encourage employers to purchase a depression product that offers the type, intensity, and duration of care management shown to improve clinical and work outcomes. In a randomized controlled trial conducted with 360 employers of 30 regional business coalitions, the research team proposes to compare the impact of a value-based marketing intervention to usual-care marketing on employer purchase of depression products. The study will also identify mediators and organizational-level moderators of intervention impact. Employers randomized to the value-based condition receive a presentation encouraging them to purchase depression products scientifically shown to benefit the employee and the employer. Employers randomized to the usual-care condition receive a presentation encouraging them to monitor and improve quality indicators for outpatient depression treatment. Because previous research demonstrates that the usual-care intervention will have little to no impact on employer purchasing, depression product purchasing rates in the usual-care condition capture vendor efforts to market depression products to employers in both conditions while the value-based intervention is being conducted. Employers in both conditions are also provided free technical assistance to undertake the actions each presentation encourages. The research team will use intent-to-treat models of all available data to evaluate intervention impact on the purchase of depression products using a cumulative incidence analysis of 12- and 24-month data. By addressing the 'value to whom?' question, the study advances knowledge about one of the most pivotal problems in the translation of evidence-based care to 'real world' settings: whether purchasers can be influenced to buy healthcare products on the basis of value and not exclusively on the basis of cost. If value-based marketing increases depression product purchase rates over usual care, this study will provide encouragement to market new healthcare products on the basis of the product's value to the purchaser as well as the recipient of care. NCT01013220.

32 CFR 536.97 - Scope for claims under the National Guard Claims Act.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) The ARNG also employs civilians, referred to as technicians and employed under 32 U.S.C. 709. Technicians are usually, but not always, ARNG soldiers who perform the usual 15 days of annual training (a... technicians. However, since the NGCA's enactment in 1960, Congress has also extended Federal Tort Claims Act...

Apparatus and method for quantitative determination of materials contained in fluids

DOEpatents

Radziemski, Leon J.; Cremers, David A.

1985-01-01

Apparatus and method for near real-time in-situ monitoring of particulates and vapors contained in fluids. Initial filtration of a known volume of the fluid sample is combined with laser-induced dielectric breakdown spectroscopy of the filter employed to obtain qualitative and quantitative information with high sensitivity. Application of the invention to monitoring of beryllium, beryllium oxide, or other beryllium-alloy dusts is demonstrated. Significant shortening of analysis time is achieved from those of the usual chemical techniques of analysis.

Apparatus and method for quantitative determination of materials contained in fluids

DOEpatents

Radziemski, L.J.; Cremers, D.A.

1982-09-07

Apparatus and method for near real-time in-situ monitoring of particulates and vapors contained in fluids are described. Initial filtration of a known volume of the fluid sample is combined with laser-induced dielectric breakdown spectroscopy of the filter employed to obtain qualitative and quantitative information with high sensitivity. Application of the invention to monitoring of beryllium, beryllium oxide, or other beryllium-alloy dusts is shown. Significant shortening of analysis time is achieved from the usual chemical techniques of analysis.

Methods of Helium Injection and Removal for Heat Transfer Augmentation

NASA Technical Reports Server (NTRS)

Haight, Harlan; Kegley, Jeff; Bourdreaux, Meghan

2008-01-01

While augmentation of heat transfer from a test article by helium gas at low pressures is well known, the method is rarely employed during space simulation testing because the test objectives usually involve simulation of an orbital thermal environment. Test objectives of cryogenic optical testing at Marshall Space Flight Center's X-ray Cryogenic Facility (XRCF) have typically not been constrained by orbital environment parameters. As a result, several methods of helium injection have been utilized at the XRCF since 1999 to decrease thermal transition times. A brief synopsis of these injection (and removal) methods including will be presented.

Determination of Pb in Biological Samples by Graphite Furnace Atomic Absorption Spectrophotometry: An Exercise in Common Interferences and Fundamental Practices in Trace Element Determination

ERIC Educational Resources Information Center

Spudich, Thomas M.; Herrmann, Jennifer K.; Fietkau, Ronald; Edwards, Grant A.

2004-01-01

An experiment is conducted to ascertain trace-level Pb in samples of bovine liver or muscle by applying graphite furnace atomic absorption spectrophotometry (GFAAS). The primary objective is to display the effects of physical and spectral intrusions in determining trace elements, and project the usual methods employed to minimize accuracy errors…

Depressed mood, usual activity level, and continued employment after starting dialysis.

PubMed

Kutner, Nancy G; Zhang, Rebecca; Huang, Yijian; Johansen, Kirsten L

2010-11-01

When patients start dialysis, their employment rate declines and disability benefits are an option. With patient sociodemographic and clinical characteristics including disability income status controlled, we investigated the significance of depressed mood and usual activity level as predictors of patients' continued employment after dialysis start. Incident patients from 296 randomly selected dialysis clinics were surveyed in the Comprehensive Dialysis Study (CDS). Participants provided information about employment status, disability income status, education, depressive symptoms measured by the Patient Health Questionnaire-2 (PHQ-2), and usual activity level/energy expenditure measured by the Human Activity Profile. Age, gender, race, insurance, diabetes, inability to ambulate or transfer, chronic obstructive pulmonary disease, cardiovascular conditions, and hemoglobin and serum albumin values at treatment start were obtained from US Renal Data System files. Dialysis modality was defined at time of interview. Among 585 CDS participants who worked in the previous year, 191 (32.6%) continued working after dialysis start. On the basis of the PHQ-2 cutoff score ≥3, 12.1% of patients who remained employed had possible or probable depression, compared with 32.8% of patients who were no longer employed. In adjusted analyses, higher Human Activity Profile scores were associated with increased likelihood of continued employment, and there was a borderline association between lower PHQ-2 scores and continued employment. Screening and management of depressive symptoms and support for increased activity level may facilitate patients' opportunity for continued employment after dialysis start, along with generally improving their overall quality of life.

Measurement of two-photon-absorption spectra through nonlinear fluorescence produced by a line-shaped excitation beam.

PubMed

Hasani, E; Parravicini, J; Tartara, L; Tomaselli, A; Tomassini, D

2018-05-01

We propose an innovative experimental approach to estimate the two-photon absorption (TPA) spectrum of a fluorescent material. Our method develops the standard indirect fluorescence-based method for the TPA measurement by employing a line-shaped excitation beam, generating a line-shaped fluorescence emission. Such a configuration, which requires a relatively high amount of optical power, permits to have a greatly increased fluorescence signal, thus avoiding the photon counterdetection devices usually used in these measurements, and allowing to employ detectors such as charge-coupled device (CCD) cameras. The method is finally tested on a fluorescent isothiocyanate sample, whose TPA spectrum, which is measured with the proposed technique, is compared with the TPA spectra reported in the literature, confirming the validity of our experimental approach. © 2018 The Authors Journal of Microscopy © 2018 Royal Microscopical Society.

Methods for the continuous production of plastic scintillator materials

DOEpatents

Bross, Alan; Pla-Dalmau, Anna; Mellott, Kerry

1999-10-19

Methods for producing plastic scintillating material employing either two major steps (tumble-mix) or a single major step (inline-coloring or inline-doping). Using the two step method, the polymer pellets are mixed with silicone oil, and the mixture is then tumble mixed with the dopants necessary to yield the proper response from the scintillator material. The mixture is then placed in a compounder and compounded in an inert gas atmosphere. The resultant scintillator material is then extruded and pelletized or formed. When only a single step is employed, the polymer pellets and dopants are metered into an inline-coloring extruding system. The mixture is then processed under a inert gas atmosphere, usually argon or nitrogen, to form plastic scintillator material in the form of either scintillator pellets, for subsequent processing, or as material in the direct formation of the final scintillator shape or form.

Off-the-job training for VATS employing anatomically correct lung models.

PubMed

Obuchi, Toshiro; Imakiire, Takayuki; Miyahara, Sou; Nakashima, Hiroyasu; Hamanaka, Wakako; Yanagisawa, Jun; Hamatake, Daisuke; Shiraishi, Takeshi; Moriyama, Shigeharu; Iwasaki, Akinori

2012-02-01

We evaluated our simulated major lung resection employing anatomically correct lung models as "off-the-job training" for video-assisted thoracic surgery trainees. A total of 76 surgeons voluntarily participated in our study. They performed video-assisted thoracic surgical lobectomy employing anatomically correct lung models, which are made of sponges so that vessels and bronchi can be cut using usual surgical techniques with typical forceps. After the simulation surgery, participants answered questionnaires on a visual analogue scale, in terms of their level of interest and the reality of our training method as off-the-job training for trainees. We considered that the closer a score was to 10, the more useful our method would be for training new surgeons. Regarding the appeal or level of interest in this simulation surgery, the mean score was 8.3 of 10, and regarding reality, it was 7.0. The participants could feel some of the real sensations of the surgery and seemed to be satisfied to perform the simulation lobectomy. Our training method is considered to be suitable as an appropriate type of surgical off-the-job training.

The costs and benefits of enhanced depression care to employers.

PubMed

Wang, Philip S; Patrick, Amanda; Avorn, Jerry; Azocar, Francisca; Ludman, Evette; McCulloch, Joyce; Simon, Gregory; Kessler, Ronald

2006-12-01

Although outreach and enhanced treatment interventions improve depression outcomes, uptake has been poor in part because purchasers lack information on their return on investment. To estimate the costs and benefits of enhanced depression care for workers from the societal and employer-purchaser perspectives. Cost-effectiveness and cost-benefit analyses using state-transition Markov models. Simulated movements between health states were based on probabilities drawn from the clinical literature. Hypothetical cohort of 40-year-old workers. Intervention Enhanced depression care consisting of a depression screen and care management for those depressed vs usual care. Our base-case cost-effectiveness analysis was from the societal perspective; costs and quality-adjusted life-years were used to compute the incremental cost-effectiveness of the intervention relative to usual care. A secondary cost-benefit analysis from the employer's perspective tracked monetary costs and monetary benefits accruing to employers during a 5-year time horizon. From the societal perspective, screening and depression care management for workers result in an incremental cost-effectiveness ratio of $19 976 per quality-adjusted life-year relative to usual care. These results are consistent with recent primary care effectiveness trials and within the range for medical interventions usually covered by employer-sponsored insurance. From the employer's perspective, enhanced depression care yields a net cumulative benefit of $2895 after 5 years. In 1-way and probabilistic sensitivity analyses, these findings were robust to a variety of assumptions. If these results can be replicated in effectiveness trials directly assessing effects on work outcomes, they suggest that enhanced treatment quality programs for depression are cost-beneficial to purchasers.

Effective Algorithm for Detection and Correction of the Wave Reconstruction Errors Caused by the Tilt of Reference Wave in Phase-shifting Interferometry

NASA Astrophysics Data System (ADS)

Xu, Xianfeng; Cai, Luzhong; Li, Dailin; Mao, Jieying

2010-04-01

In phase-shifting interferometry (PSI) the reference wave is usually supposed to be an on-axis plane wave. But in practice a slight tilt of reference wave often occurs, and this tilt will introduce unexpected errors of the reconstructed object wave-front. Usually the least-square method with iterations, which is time consuming, is employed to analyze the phase errors caused by the tilt of reference wave. Here a simple effective algorithm is suggested to detect and then correct this kind of errors. In this method, only some simple mathematic operation is used, avoiding using least-square equations as needed in most methods reported before. It can be used for generalized phase-shifting interferometry with two or more frames for both smooth and diffusing objects, and the excellent performance has been verified by computer simulations. The numerical simulations show that the wave reconstruction errors can be reduced by 2 orders of magnitude.

Occupational Communities: Culture and Control in Organizations

DTIC Science & Technology

1982-11-01

predictions flowing from the theory that guided the research . Similarly, studies of engineers employed in heteronomous organizations suggest that most...buzzing, confusion" of phenomenological approaches to the study of work worlds can be captured by our theories . Our second purpose was more rhetorical...networks are built and change are, however, matters not so easily mapped since they require sensible qualitative study . Usually, one method or the other is

A flux monitoring method for easy and accurate flow rate measurement in pressure-driven flows.

PubMed

Siria, Alessandro; Biance, Anne-Laure; Ybert, Christophe; Bocquet, Lydéric

2012-03-07

We propose a low-cost and versatile method to measure flow rate in microfluidic channels under pressure-driven flows, thereby providing a simple characterization of the hydrodynamic permeability of the system. The technique is inspired by the current monitoring method usually employed to characterize electro-osmotic flows, and makes use of the measurement of the time-dependent electric resistance inside the channel associated with a moving salt front. We have successfully tested the method in a micrometer-size channel, as well as in a complex microfluidic channel with a varying cross-section, demonstrating its ability in detecting internal shape variations.

Highlight removal based on the regional-projection fringe projection method

NASA Astrophysics Data System (ADS)

Qi, Zhaoshuai; Wang, Zhao; Huang, Junhui; Xing, Chao; Gao, Jianmin

2018-04-01

In fringe projection profilometry, highlight usually causes the saturation and blooming in captured fringes and reduces the measurement accuracy. To solve the problem, a regional-projection fringe projection (RP-FP) method is proposed. Regional projection patterns (RP patterns) are projected onto the tested object surface to avoid the saturation and blooming. Then, an image inpainting technique is employed to reconstruct the missing phases in the captured RP patterns and a complete surface of the tested object is obtained. Experiments verified the effectiveness of the proposed method. The method can be widely used in industrial inspections and quality controlling in mechanical and manufacturing industries.

Measurement of Antenna Bore-Sight Gain

NASA Technical Reports Server (NTRS)

Fortinberry, Jarrod; Shumpert, Thomas

2016-01-01

The absolute or free-field gain of a simple antenna can be approximated using standard antenna theory formulae or for a more accurate prediction, numerical methods may be employed to solve for antenna parameters including gain. Both of these methods will result in relatively reasonable estimates but in practice antenna gain is usually verified and documented via measurements and calibration. In this paper, a relatively simple and low-cost, yet effective means of determining the bore-sight free-field gain of a VHF/UHF antenna is proposed by using the Brewster angle relationship.

Calculation of the ELISA's cut-off based on the change-point analysis method for detection of Trypanosoma cruzi infection in Bolivian dogs in the absence of controls.

PubMed

Lardeux, Frédéric; Torrico, Gino; Aliaga, Claudia

2016-07-04

In ELISAs, sera of individuals infected by Trypanosoma cruzi show absorbance values above a cut-off value. The cut-off is generally computed by means of formulas that need absorbance readings of negative (and sometimes positive) controls, which are included in the titer plates amongst the unknown samples. When no controls are available, other techniques should be employed such as change-point analysis. The method was applied to Bolivian dog sera processed by ELISA to diagnose T. cruzi infection. In each titer plate, the change-point analysis estimated a step point which correctly discriminated among known positive and known negative sera, unlike some of the six usual cut-off formulas tested. To analyse the ELISAs results, the change-point method was as good as the usual cut-off formula of the form "mean + 3 standard deviation of negative controls". Change-point analysis is therefore an efficient alternative method to analyse ELISA absorbance values when no controls are available.

External and internal structure of weevils (Insecta: Coleoptera) investigated with phase-contrast X-ray imaging

NASA Astrophysics Data System (ADS)

Hönnicke, M. G.; Cusatis, C.; Rigon, L.; Menk, R.-H.; Arfelli, F.; Foerster, L. A.; Rosado-Neto, G. H.

2010-08-01

Weevils (Coleoptera: Curculionidae) are identified by the external structure (dorsal, ventral and lateral features) and also by internal structure. The genitalia can be used to distinguish the sex and to identify the insects when the external structure appears identical. For this purpose, a destructive dissecting microscopy procedure is usually employed. In this paper, phase contrast X-ray imaging (radiography and tomography) is employed to investigate the internal structure (genitalia) of two entire species of weevils that presents very similar external structures ( Sitophilus oryzae and Sitophilus zeamais). The detection of features, which looks like the genital structure, shows that such non-destructive technique could be used as an alternative method for identification of insects. This method is especially useful in examining the internal features of precious species from museum collections, as already described in the recent literature.

Improved GO/PO method and its application to wideband SAR image of conducting objects over rough surface

NASA Astrophysics Data System (ADS)

Jiang, Wang-Qiang; Zhang, Min; Nie, Ding; Jiao, Yong-Chang

2018-04-01

To simulate the multiple scattering effect of target in synthetic aperture radar (SAR) image, the hybrid method GO/PO method, which combines the geometrical optics (GO) and physical optics (PO), is employed to simulate the scattering field of target. For ray tracing is time-consuming, the Open Graphics Library (OpenGL) is usually employed to accelerate the process of ray tracing. Furthermore, the GO/PO method is improved for the simulation in low pixel situation. For the improved GO/PO method, the pixels are arranged corresponding to the rectangular wave beams one by one, and the GO/PO result is the sum of the contribution values of all the rectangular wave beams. To get high-resolution SAR image, the wideband echo signal is simulated which includes information of many electromagnetic (EM) waves with different frequencies. Finally, the improved GO/PO method is used to simulate the SAR image of targets above rough surface. And the effects of reflected rays and the size of pixel matrix on the SAR image are also discussed.

Mathematical Aspects of Finite Element Methods for Incompressible Viscous Flows.

DTIC Science & Technology

1986-09-01

respectively. Here h is a parameter which is usually related to the size of the grid associated with the finite element partitioning of Q. Then one... grid and of not at least performing serious mesh refinement studies. It also points out the usefulness of rigorous results concerning the stability...overconstrained the .1% approximate velocity field. However, by employing different grids for the ’z pressure and velocity fields, the linear-constant

Bioethics methods in the ethical, legal, and social implications of the human genome project literature.

PubMed

Walker, Rebecca L; Morrissey, Clair

2014-11-01

While bioethics as a field has concerned itself with methodological issues since the early years, there has been no systematic examination of how ethics is incorporated into research on the Ethical, Legal and Social Implications (ELSI) of the Human Genome Project. Yet ELSI research may bear a particular burden of investigating and substantiating its methods given public funding, an explicitly cross-disciplinary approach, and the perceived significance of adequate responsiveness to advances in genomics. We undertook a qualitative content analysis of a sample of ELSI publications appearing between 2003 and 2008 with the aim of better understanding the methods, aims, and approaches to ethics that ELSI researchers employ. We found that the aims of ethics within ELSI are largely prescriptive and address multiple groups. We also found that the bioethics methods used in the ELSI literature are both diverse between publications and multiple within publications, but are usually not themselves discussed or employed as suggested by bioethics method proponents. Ethics in ELSI is also sometimes undistinguished from related inquiries (such as social, legal, or political investigations). © 2013 John Wiley & Sons Ltd.

BIOETHICS METHODS IN THE ETHICAL, LEGAL, AND SOCIAL IMPLICATIONS OF THE HUMAN GENOME PROJECT LITERATURE

PubMed Central

Walker, Rebecca; Morrissey, Clair

2013-01-01

While bioethics as a field has concerned itself with methodological issues since the early years, there has been no systematic examination of how ethics is incorporated into research on the Ethical, Legal and Social Implications (ELSI) of the Human Genome Project. Yet ELSI research may bear a particular burden of investigating and substantiating its methods given public funding, an explicitly cross-disciplinary approach, and the perceived significance of adequate responsiveness to advances in genomics. We undertook a qualitative content analysis of a sample of ELSI publications appearing between 2003-2008 with the aim of better understanding the methods, aims, and approaches to ethics that ELSI researchers employ. We found that the aims of ethics within ELSI are largely prescriptive and address multiple groups. We also found that the bioethics methods used in the ELSI literature are both diverse between publications and multiple within publications, but are usually not themselves discussed or employed as suggested by bioethics method proponents. Ethics in ELSI is also sometimes undistinguished from related inquiries (such as social, legal, or political investigations). PMID:23796275

An adaptive model order reduction by proper snapshot selection for nonlinear dynamical problems

NASA Astrophysics Data System (ADS)

Nigro, P. S. B.; Anndif, M.; Teixeira, Y.; Pimenta, P. M.; Wriggers, P.

2016-04-01

Model Order Reduction (MOR) methods are employed in many fields of Engineering in order to reduce the processing time of complex computational simulations. A usual approach to achieve this is the application of Galerkin projection to generate representative subspaces (reduced spaces). However, when strong nonlinearities in a dynamical system are present and this technique is employed several times along the simulation, it can be very inefficient. This work proposes a new adaptive strategy, which ensures low computational cost and small error to deal with this problem. This work also presents a new method to select snapshots named Proper Snapshot Selection (PSS). The objective of the PSS is to obtain a good balance between accuracy and computational cost by improving the adaptive strategy through a better snapshot selection in real time (online analysis). With this method, it is possible a substantial reduction of the subspace, keeping the quality of the model without the use of the Proper Orthogonal Decomposition (POD).

Human Age Estimation Method Robust to Camera Sensor and/or Face Movement

PubMed Central

Nguyen, Dat Tien; Cho, So Ra; Pham, Tuyen Danh; Park, Kang Ryoung

2015-01-01

Human age can be employed in many useful real-life applications, such as customer service systems, automatic vending machines, entertainment, etc. In order to obtain age information, image-based age estimation systems have been developed using information from the human face. However, limitations exist for current age estimation systems because of the various factors of camera motion and optical blurring, facial expressions, gender, etc. Motion blurring can usually be presented on face images by the movement of the camera sensor and/or the movement of the face during image acquisition. Therefore, the facial feature in captured images can be transformed according to the amount of motion, which causes performance degradation of age estimation systems. In this paper, the problem caused by motion blurring is addressed and its solution is proposed in order to make age estimation systems robust to the effects of motion blurring. Experiment results show that our method is more efficient for enhancing age estimation performance compared with systems that do not employ our method. PMID:26334282

LAWS ON SEX DISCRIMINATION IN EMPLOYMENT--FEDERAL CIVIL RIGHTS ACT, TITLE VII. STATE FAIR EMPLOYMENT PRACTICES LAWS.

ERIC Educational Resources Information Center

Women's Bureau (DOL), Washington, DC.

TITLE VII OF THE FEDERAL CIVIL RIGHTS ACT (1964) PROHIBITS DISCRIMINATION ON THE BASIS OF SEX IN ADDITION TO THE USUAL GROUNDS OF RACE, COLOR, RELIGION, AND NATIONAL ORIGIN. IT COVERS PRIVATE EMPLOYMENT AND LABOR ORGANIZATIONS ENGAGED IN INDUSTRIES AFFECTING COMMERCE, AS WELL AS EMPLOYMENT AGENCIES. IT IS UNLAWFUL FOR EMPLOYERS TO REFUSE TO HIRE,…

A Probabilistic Collocation Based Iterative Kalman Filter for Landfill Data Assimilation

NASA Astrophysics Data System (ADS)

Qiang, Z.; Zeng, L.; Wu, L.

2016-12-01

Due to the strong spatial heterogeneity of landfill, uncertainty is ubiquitous in gas transport process in landfill. To accurately characterize the landfill properties, the ensemble Kalman filter (EnKF) has been employed to assimilate the measurements, e.g., the gas pressure. As a Monte Carlo (MC) based method, the EnKF usually requires a large ensemble size, which poses a high computational cost for large scale problems. In this work, we propose a probabilistic collocation based iterative Kalman filter (PCIKF) to estimate permeability in a liquid-gas coupling model. This method employs polynomial chaos expansion (PCE) to represent and propagate the uncertainties of model parameters and states, and an iterative form of Kalman filter to assimilate the current gas pressure data. To further reduce the computation cost, the functional ANOVA (analysis of variance) decomposition is conducted, and only the first order ANOVA components are remained for PCE. Illustrated with numerical case studies, this proposed method shows significant superiority in computation efficiency compared with the traditional MC based iterative EnKF. The developed method has promising potential in reliable prediction and management of landfill gas production.

Data Analysis Approaches for the Risk-Informed Safety Margins Characterization Toolkit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Alfonsi, Andrea; Maljovec, Daniel P.

2016-09-01

In the past decades, several numerical simulation codes have been employed to simulate accident dynamics (e.g., RELAP5-3D, RELAP-7, MELCOR, MAAP). In order to evaluate the impact of uncertainties into accident dynamics, several stochastic methodologies have been coupled with these codes. These stochastic methods range from classical Monte-Carlo and Latin Hypercube sampling to stochastic polynomial methods. Similar approaches have been introduced into the risk and safety community where stochastic methods (such as RAVEN, ADAPT, MCDET, ADS) have been coupled with safety analysis codes in order to evaluate the safety impact of timing and sequencing of events. These approaches are usually calledmore » Dynamic PRA or simulation-based PRA methods. These uncertainties and safety methods usually generate a large number of simulation runs (database storage may be on the order of gigabytes or higher). The scope of this paper is to present a broad overview of methods and algorithms that can be used to analyze and extract information from large data sets containing time dependent data. In this context, “extracting information” means constructing input-output correlations, finding commonalities, and identifying outliers. Some of the algorithms presented here have been developed or are under development within the RAVEN statistical framework.« less

Driver behavior profiling: An investigation with different smartphone sensors and machine learning

PubMed Central

Ferreira, Jair; Carvalho, Eduardo; Ferreira, Bruno V.; de Souza, Cleidson; Suhara, Yoshihiko; Pentland, Alex

2017-01-01

Driver behavior impacts traffic safety, fuel/energy consumption and gas emissions. Driver behavior profiling tries to understand and positively impact driver behavior. Usually driver behavior profiling tasks involve automated collection of driving data and application of computer models to generate a classification that characterizes the driver aggressiveness profile. Different sensors and classification methods have been employed in this task, however, low-cost solutions and high performance are still research targets. This paper presents an investigation with different Android smartphone sensors, and classification algorithms in order to assess which sensor/method assembly enables classification with higher performance. The results show that specific combinations of sensors and intelligent methods allow classification performance improvement. PMID:28394925

Implementation and Performance Analysis of Parallel Assignment Algorithms on a Hypercube Computer.

DTIC Science & Technology

1987-12-01

coupled pro- cessors because of the degree of interaction between processors imposed by the global memory [HwB84]. Another sub-class of MIMD... interaction between the individual processors [MuA87]. Many of the commercial MIMD computers available today are loosely coupled [HwB84]. 2.1.3 The Hypercube...Alpha-beta is a method usually employed in the solution of two-person zero-sum games like chess and checkers [Qui87]. The ha sic approach of the alpha

The ethical tightrope: politics of intimacy and consensual method in sexuality research.

PubMed

Zago, Luiz F; Holmes, Dave

2015-06-01

This paper seeks to analyze the construction of ethics in sexuality research in which qualitative methods are employed in the field of social sciences. Analyses are based on a bibliographic review of current discussions on research methods of queer theory and on the authors' own experiences of past research on sexuality. The article offers a theoretical perspective on the ways ethnography and in-depth interviews become methods that can rely on a consensual method and create a politics of intimacy between the researchers and research participants. The politics of intimacy may contribute to the production of a politically engaged knowledge while escaping from the moral matrix that usually governs the relationship between researchers and research participants. It is argued here that the researcher's sexed and gendered body matters for fieldwork; that the consensual method among participants may be employed in sexuality research as a fruitful tool; and that the relationships created among researchers and participants can pose a challenge to predetermined ethical guidelines in research. As a result, discussions problematize the existence of a politics of intimacy in sexuality research that is characterized by ethical relations among research participants. © 2014 John Wiley & Sons Ltd.

Femtosecond laser ablation of gold interdigitated electrodes for electronic tongues

NASA Astrophysics Data System (ADS)

Manzoli, Alexandra; de Almeida, Gustavo F. B.; Filho, José A.; Mattoso, Luiz H. C.; Riul, Antonio; Mendonca, Cleber R.; Correa, Daniel S.

2015-06-01

Electronic tongue (e-tongue) sensors based on impedance spectroscopy have emerged as a potential technology to evaluate the quality and chemical composition of food, beverages, and pharmaceuticals. E-tongues usually employ transducers based on metal interdigitated electrodes (IDEs) coated with a thin layer of an active material, which is capable of interacting chemically with several types of analytes. IDEs are usually produced by photolithographic methods, which are time-consuming and costly, therefore, new fabrication technologies are required to make it more affordable. Here, we employed femtosecond laser ablation with pulse duration of 50 fs to microfabricate gold IDEs having finger width from 2.3 μm up to 3.2 μm. The parameters used in the laser ablation technique, such as light intensity, scan speed and beam spot size have been optimized to achieve uniform IDEs, which were characterized by optical and scanning electron microscopy. The electrical properties of gold IDEs fabricated by laser ablation were evaluated by impedance spectroscopy, and compared to those produced by conventional photolithography. The results show that femtosecond laser ablation is a promising alternative to conventional photolithography for fabricating metal IDEs for e-tongue systems.

Does cancer reduce labor market entry? Evidence for prime-age females.

PubMed

Moran, John R; Short, Pamela Farley

2014-06-01

Existing studies of the labor market status of cancer survivors have focused on the extent to which cancer disrupts the employment of individuals who were working when diagnosed with cancer. We examine how surviving cancer affects labor market entry and usual hours of work among females aged 28 to 54 years who were not working when first diagnosed. We find that prime-age females have employment rates 2 to 6 years after diagnosis that are 12 percentage points lower than otherwise similar women who were initially out of the labor force, full-time employment rates that are 10 percentage points lower, and usual hours of work that are 5 hours per week lower. These estimates are somewhat larger than estimates for prime-age women employed at the time of diagnosis and highlight the importance of considering nonworking females when assessing the economic and psychosocial burden of cancer.

A pruning algorithm for Meta-blocking based on cumulative weight

NASA Astrophysics Data System (ADS)

Zhang, Fulin; Gao, Zhipeng; Niu, Kun

2017-08-01

Entity Resolution is an important process in data cleaning and data integration. It usually employs a blocking method to avoid the quadratic complexity work when scales to large data sets. Meta-blocking can perform better in the context of highly heterogeneous information spaces. Yet, its precision and efficiency still have room to improve. In this paper, we present a new pruning algorithm for Meta-Blocking. It can achieve a higher precision than the existing WEP algorithm at a small cost of recall. In addition, can reduce the runtime of the blocking process. We evaluate our proposed method over five real-world data sets.

The employment of elderly persons*

PubMed Central

Davies, T. A. Lloyd

1955-01-01

Not every old person is fit for employment, and consequently employment agencies must reserve the right of selection. Retirement at the customary age with, if desired, re-employment for defined periods seems to offer the best method of employing old people, avoiding damaging loss of dignity and the blocking of promotion of younger people. Under suitable conditions, old persons are capable of a high level of employment. The possibilities of employment, however, vary very much with different types of industries and industrial regions. The elderly usually have a higher sickness absenteeism than young people, but have fewer absences for other reasons than sickness. Elderly workers seem to be able to carry out manual labour with efficiency if they are put into jobs without time-stress. If retraining is necessary, the utmost possible use should be made of already established skills. Heavy work does not seem to be necessarily harmful for old people. Little knowledge is yet available on the health problems of professional workers or executives at increasing age. Lack of decisiveness, failure of critical judgement, and increasing irritability—resulting from difficulty in organizing new information—will call for transfer to less responsible positions. Many more studies of old age are needed before the circumstances under which they may best be employed in present-day industry can be determined. Full employment and the need for production make this problem still more urgent. PMID:13276813

A comparison of two closely-related approaches to aerodynamic design optimization

NASA Technical Reports Server (NTRS)

Shubin, G. R.; Frank, P. D.

1991-01-01

Two related methods for aerodynamic design optimization are compared. The methods, called the implicit gradient approach and the variational (or optimal control) approach, both attempt to obtain gradients necessary for numerical optimization at a cost significantly less than that of the usual black-box approach that employs finite difference gradients. While the two methods are seemingly quite different, they are shown to differ (essentially) in that the order of discretizing the continuous problem, and of applying calculus, is interchanged. Under certain circumstances, the two methods turn out to be identical. We explore the relationship between these methods by applying them to a model problem for duct flow that has many features in common with transonic flow over an airfoil. We find that the gradients computed by the variational method can sometimes be sufficiently inaccurate to cause the optimization to fail.

The Employment and Postsecondary Educational Status of Transition-Age Youths with Visual Impairments

ERIC Educational Resources Information Center

McDonnall, Michele Capella

2010-01-01

A limited amount of information is available about the employment and postsecondary educational status of transition-age youths with visual impairments. Reports on the employment and postsecondary education tend to focus on overall results and usually do not provide detailed analyses by disability groups. In this article, the author presents the…

Thermal Spraying of CuAlFe Powder on Cu5Sn Alloy

NASA Astrophysics Data System (ADS)

Roata, I. C.; Pascu, A.; Croitoru, C.; Stanciu, E. M.; Pop, M. A.

2017-06-01

To improve the corrosion and wear resistance of copper and its alloys, flame spraying has been employed to obtain a relatively homogenous Cu/Al/Fe-based coating. To minimize the defects that usually occur by using this method, a post-coating annealing step has been employed, by using concentrated solar energy as means of thermal surface treatment. Scanning electron micrographs have indicated a reduction in the cracks/pores density and accelerated corrosion testing have indicated a higher performance of the solar-annealed sample, in comparison with the initial reference material. The coating approach mentioned in this paper could be successfully applied to restore several worn tools and instruments, and could also be of use in the renewable energy field (IR-absorbent coatings) or in advanced oxidation processes, such as photocatalysis.

Modeling the absorption spectrum of the permanganate ion in vacuum and in aqueous solution

NASA Astrophysics Data System (ADS)

Olsen, Jógvan Magnus Haugaard; Hedegård, Erik Donovan

The absorption spectrum of the MnO$_{4}$$^{-}$ ion has been a test-bed for quantum-chemical methods over the last decades. Its correct description requires highly-correlated multiconfigurational methods, which are incompatible with the inclusion of finite-temperature and solvent effects due to their high computational demands. Therefore, implicit solvent models are usually employed. Here we show that implicit solvent models are not sufficiently accurate to model the solvent shift of MnO$_{4}$$^{-}$, and we analyze the origins of their failure. We obtain the correct solvent shift for MnO$_{4}$$^{-}$ in aqueous solution by employing the polarizable embedding (PE) model combined with a range-separated complete active space short-range density functional theory method (CAS-srDFT). Finite-temperature effects are taken into account by averaging over structures obtained from ab initio molecular dynamics simulations. The explicit treatment of finite-temperature and solvent effects facilitates the interpretation of the bands in the low-energy region of the MnO$_{4}$$^{-}$ absorption spectrum, whose assignment has been elusive.

Rapid calculation method for Frenkel-type two-exciton states in one to three dimensions

NASA Astrophysics Data System (ADS)

Ajiki, Hiroshi

2014-07-01

Biexciton and two-exciton dissociated states of Frenkel-type excitons are well described by a tight-binding model with a nearest-neighbor approximation. Such two-exciton states in a finite-size lattice are usually calculated by numerical diagonalization of the Hamiltonian, which requires an increasing amount of computational time and memory as the lattice size increases. I develop here a rapid, memory-saving method to calculate the energies and wave functions of two-exciton states by employing a bisection method. In addition, an attractive interaction between two excitons in the tight-binding model can be obtained directly so that the biexciton energy agrees with the observed energy, without the need for the trial-and-error procedure implemented in the numerical diagonalization method.

Trying to find the quickest way: employed mothers' constructions of time for food.

PubMed

Jabs, Jennifer; Devine, Carol M; Bisogni, Carole A; Farrell, Tracy J; Jastran, Margaret; Wethington, Elaine

2007-01-01

The study sought to develop an understanding of how employed mothers constructed time for food provisioning for themselves and their families. A grounded theory approach and semistructured, in-depth interviews. A metropolitan area of approximately 1 million people in the northeastern United States. Thirty-five low-wage employed mothers were purposively recruited to vary in occupation, race/ethnicity, education, household composition, and age using workplace, community, convenience, and snowball sampling. Low-wage employed mothers' constructions of time for food. Interview transcripts were analyzed using the constant comparative method. Most mothers expressed feelings of time scarcity. Mothers described 3 timestyles that reflected how they constructed time. Timestyles reflected mothers' experiences of strain and time scarcity, usual time management strategies, and sense of control over time. Mothers prioritized feeding their children but wanted to complete meals quickly in order to move on to other tasks. Recognizing issues of time scarcity and individual differences of timestyles and time management strategies can help researchers better understand food choice practices and assist practitioners in identifying practical food provisioning strategies for low-wage employed mothers. Food policies and recommendations should be evaluated for their relevance to the time scarcity and work strain issues that these mothers faced.

An analysis of parameter sensitivities of preference-inspired co-evolutionary algorithms

NASA Astrophysics Data System (ADS)

Wang, Rui; Mansor, Maszatul M.; Purshouse, Robin C.; Fleming, Peter J.

2015-10-01

Many-objective optimisation problems remain challenging for many state-of-the-art multi-objective evolutionary algorithms. Preference-inspired co-evolutionary algorithms (PICEAs) which co-evolve the usual population of candidate solutions with a family of decision-maker preferences during the search have been demonstrated to be effective on such problems. However, it is unknown whether PICEAs are robust with respect to the parameter settings. This study aims to address this question. First, a global sensitivity analysis method - the Sobol' variance decomposition method - is employed to determine the relative importance of the parameters controlling the performance of PICEAs. Experimental results show that the performance of PICEAs is controlled for the most part by the number of function evaluations. Next, we investigate the effect of key parameters identified from the Sobol' test and the genetic operators employed in PICEAs. Experimental results show improved performance of the PICEAs as more preferences are co-evolved. Additionally, some suggestions for genetic operator settings are provided for non-expert users.

Determination of the Isotopic Enrichment of 13C- and 2H-Labeled Tracers of Glucose Using High-Resolution Mass Spectrometry: Application to Dual- and Triple-Tracer Studies.

PubMed

Trötzmüller, Martin; Triebl, Alexander; Ajsic, Amra; Hartler, Jürgen; Köfeler, Harald; Regittnig, Werner

2017-11-21

Multiple-tracer approaches for investigating glucose metabolism in humans usually involve the administration of stable and radioactive glucose tracers and the subsequent determination of tracer enrichments in sampled blood. When using conventional, low-resolution mass spectrometry (LRMS), the number of spectral interferences rises rapidly with the number of stable tracers employed. Thus, in LRMS, both computational effort and statistical uncertainties associated with the correction for spectral interferences limit the number of stable tracers that can be simultaneously employed (usually two). Here we show that these limitations can be overcome by applying high-resolution mass spectrometry (HRMS). The HRMS method presented is based on the use of an Orbitrap mass spectrometer operated at a mass resolution of 100 000 to allow electrospray-generated ions of the deprotonated glucose molecules to be monitored at their exact masses. The tracer enrichment determination in blood plasma is demonstrated for several triple combinations of 13 C- and 2 H-labeled glucose tracers (e.g., [1- 2 H 1 ]-, [6,6- 2 H 2 ]-, [1,6- 13 C 2 ]glucose). For each combination it is shown that ions arising from 2 H-labeled tracers are completely differentiated from those arising from 13 C-labeled tracers, thereby allowing the enrichment of a tracer to be simply calculated from the observed ion intensities using a standard curve with curve parameters unaffected by the presence of other tracers. For each tracer, the HRMS method exhibits low limits of detection and good repeatability in the tested 0.1-15.0% enrichment range. Additionally, due to short sample preparation and analysis times, the method is well-suited for high-throughput determination of multiple glucose tracer enrichments in plasma samples.

Enlistment Decisions of Young Men.

DTIC Science & Technology

1985-07-01

14Employment status is not the usual one of employed, unemployed , or out of the labor force but instead indicates currently employed, not currently employed...worker with high firm- specific human capital, so he is less likely to be unemployed during a downturn at the firm. Job matching theory (Mincer and...returns) as well as the value one attaches to greater under- standing or appreciation of the world ( psychic returns). The monetary increment will tend to

Redshift data and statistical inference

NASA Technical Reports Server (NTRS)

Newman, William I.; Haynes, Martha P.; Terzian, Yervant

1994-01-01

Frequency histograms and the 'power spectrum analysis' (PSA) method, the latter developed by Yu & Peebles (1969), have been widely employed as techniques for establishing the existence of periodicities. We provide a formal analysis of these two classes of methods, including controlled numerical experiments, to better understand their proper use and application. In particular, we note that typical published applications of frequency histograms commonly employ far greater numbers of class intervals or bins than is advisable by statistical theory sometimes giving rise to the appearance of spurious patterns. The PSA method generates a sequence of random numbers from observational data which, it is claimed, is exponentially distributed with unit mean and variance, essentially independent of the distribution of the original data. We show that the derived random processes is nonstationary and produces a small but systematic bias in the usual estimate of the mean and variance. Although the derived variable may be reasonably described by an exponential distribution, the tail of the distribution is far removed from that of an exponential, thereby rendering statistical inference and confidence testing based on the tail of the distribution completely unreliable. Finally, we examine a number of astronomical examples wherein these methods have been used giving rise to widespread acceptance of statistically unconfirmed conclusions.

An ordinal classification approach for CTG categorization.

PubMed

Georgoulas, George; Karvelis, Petros; Gavrilis, Dimitris; Stylios, Chrysostomos D; Nikolakopoulos, George

2017-07-01

Evaluation of cardiotocogram (CTG) is a standard approach employed during pregnancy and delivery. But, its interpretation requires high level expertise to decide whether the recording is Normal, Suspicious or Pathological. Therefore, a number of attempts have been carried out over the past three decades for development automated sophisticated systems. These systems are usually (multiclass) classification systems that assign a category to the respective CTG. However most of these systems usually do not take into consideration the natural ordering of the categories associated with CTG recordings. In this work, an algorithm that explicitly takes into consideration the ordering of CTG categories, based on binary decomposition method, is investigated. Achieved results, using as a base classifier the C4.5 decision tree classifier, prove that the ordinal classification approach is marginally better than the traditional multiclass classification approach, which utilizes the standard C4.5 algorithm for several performance criteria.

Influence of an Interdisciplinary Re-employment Programme Among Unemployed Persons with Mental Health Problems on Health, Social Participation and Paid Employment.

PubMed

Carlier, Bouwine E; Schuring, Merel; Burdorf, Alex

2018-03-01

Purpose To evaluate the influence of an interdisciplinary re-employment programme on labour force participation and perceived health among unemployed persons with common mental health problems. In addition, the influence of entering paid employment on self-rated physical health and mental health was investigated. Methods In this quasi-experimental study with 2 years follow up, 869 persons were enrolled after referral to an interdisciplinary re-employment programme (n = 380) or regular re-employment programme (n = 489). The propensity score technique was used to account for observed differences between the intervention and control group. The intervention programme was provided by an interdisciplinary team, consisting of mental health care professionals as well as employment specialists. Mental health problems were addressed through cognitive counselling and individual tailored job-search support was provided by an employment professional. Primary outcome measures were paid employment and voluntary work. Secondary outcome measures were self-rated mental and physical health, measured by the Short Form 12 Health Survey, and anxiety and depressive symptoms, measured by the Kessler Psychological Distress Scale. Changes in labour force participation and health were examined with repeated-measures logistic regression analyses by the generalized estimating equations method. Results The interdisciplinary re-employment programme did not have a positive influence on entering employment or physical or mental health among unemployed persons with mental health problems. After 2 years, 10% of the participants of the intervention programme worked fulltime, compared to 4% of the participants of the usual programmes (adjusted OR 1.65). The observed differences in labour force participation were not statistically significant. However, among persons who entered paid employment, physical health improved (+16%) and anxiety and depressive symptoms decreased (-15%), whereas health remained unchanged among persons who continued to be unemployed. Conclusions Policies to improve population health should take into account that promoting paid employment may be an effective intervention to improve health. It is recommended to invest in interdisciplinary re-employment programmes with a first place and train approach.

Sidelobe-modulated optical vortices for free-space communication.

PubMed

Jia, P; Yang, Y; Min, C J; Fang, H; Yuan, X-C

2013-02-15

We propose and experimentally demonstrate a new method for free-space optical (FSO) communication, where the transmitter encodes data into a composite computer-generated hologram and the receiver decodes through a retrieved array of sidelobe-modulated optical vortices (SMOVs). By employing the SMOV generation and detection technique, the usual stringent alignment and phase-matching requirement of the detection of optical vortices is released. In transmitting a gray-scale picture with 180×180 pixels, a bit error rate as low as 3.01×10(-3) has been achieved. Due to the orbital angular momentum multiplexing and spatial paralleling, this FSO communication method possesses the ability to greatly increase the capacity of data transmission.

Noisy processing and distillation of private quantum States.

PubMed

Renes, Joseph M; Smith, Graeme

2007-01-12

We provide a simple security proof for prepare and measure quantum key distribution protocols employing noisy processing and one-way postprocessing of the key. This is achieved by showing that the security of such a protocol is equivalent to that of an associated key distribution protocol in which, instead of the usual maximally entangled states, a more general private state is distilled. In addition to a more general target state, the usual entanglement distillation tools are employed (in particular, Calderbank-Shor-Steane-like codes), with the crucial difference that noisy processing allows some phase errors to be left uncorrected without compromising the privacy of the key.

Effectiveness of a return-to-work program for workers without an employment contract, sick-listed due to common mental disorders.

PubMed

Lammerts, Lieke; Schaafsma, Frederieke G; Bonefaas-Groenewoud, Karin; van Mechelen, Willem; Anema, Johannes

2016-06-01

Both the presence of mental health problems and the absence of an employment contract have been related to long-term sickness absence and unemployment, indicating a need for return-to-work (RTW) interventions. Our aim was to study the effectiveness of a new participatory, supportive RTW program for workers without an employment contract, sick-listed 2-14 weeks due to a common mental disorder, in comparison with usual care. A participatory approach, integrated care and direct placement in a competitive job were part of the new program. The primary outcome measure was duration until first sustainable RTW in competitive employment. Cox regression analysis was applied to study this outcome. Secondary outcome measures were average working hours, duration until any type of employment, sickness benefit duration, and perceived health and functioning. In total, 186 participants were included in the study and randomly allocated to an intervention group (N=94), or control group (N= 92). A hazard ratio (HR) of 1.15 (95% CI 0.61-2.16) for duration until first sustainable RTW indicated no significant effect of allocation to the new program, compared to usual care. Furthermore, no significant differences were found in favor of the intervention group on any secondary outcome. Compared to usual care, the new program did not result in a significant shorter duration until first sustainable RTW. However, due to low protocol adherence, it remains unclear what the results would have been if the program had been executed according to protocol.

Non-pharmacological self-management for people living with migraine or tension-type headache: a systematic review including analysis of intervention components.

PubMed

Probyn, Katrin; Bowers, Hannah; Mistry, Dipesh; Caldwell, Fiona; Underwood, Martin; Patel, Shilpa; Sandhu, Harbinder Kaur; Matharu, Manjit; Pincus, Tamar

2017-08-11

To assess the effect of non-pharmacological self-management interventions against usual care, and to explore different components and delivery methods within those interventions PARTICIPANTS: People living with migraine and/or tension-type headache INTERVENTIONS: Non-pharmacological educational or psychological self-management interventions; excluding biofeedback and physical therapy.We assessed the overall effectiveness against usual care on headache frequency, pain intensity, mood, headache-related disability, quality of life and medication consumption in meta-analysis.We also provide preliminary evidence on the effectiveness of intervention components and delivery methods. We found a small overall effect for the superiority of self-management interventions over usual care, with a standardised mean difference (SMD) of -0.36 (-0.45 to -0.26) for pain intensity; -0.32 (-0.42 to -0.22) for headache-related disability, 0.32 (0.20 to 0.45) for quality of life and a moderate effect on mood (SMD=0.53 (-0.66 to -0.40)). We did not find an effect on headache frequency (SMD=-0.07 (-0.22 to 0.08)).Assessment of components and characteristics suggests a larger effect on pain intensity in interventions that included explicit educational components (-0.51 (-0.68 to -0.34) vs -0.28 (-0.40 to -0.16)); mindfulness components (-0.50 (-0.82 to -0.18) vs 0.34 (-0.44 to -0.24)) and in interventions delivered in groups vs one-to-one delivery (0.56 (-0.72 to -0.40) vs -0.39 (-0.52 to -0.27)) and larger effects on mood in interventions including a cognitive-behavioural therapy (CBT) component with an SMD of -0.72 (-0.93 to -0.51) compared with those without CBT -0.41 (-0.58 to -0.24). Overall we found that self-management interventions for migraine and tension-type headache are more effective than usual care in reducing pain intensity, mood and headache-related disability, but have no effect on headache frequency. Preliminary findings also suggest that including CBT, mindfulness and educational components in interventions, and delivery in groups may increase effectiveness. PROSPERO 2016:CRD42016041291. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Does Cognitive Behavioral Therapy for Youth Anxiety Outperform Usual Care in Community Clinics? An Initial Effectiveness Test

ERIC Educational Resources Information Center

Southam-Gerow, Michael A.; Weisz, John R.; Chu, Brian C.; McLeod, Bryce D.; Gordis, Elana B.; Connor-Smith, Jennifer K.

2010-01-01

Objective: Most tests of cognitive behavioral therapy (CBT) for youth anxiety disorders have shown beneficial effects, but these have been efficacy trials with recruited youths treated by researcher-employed therapists. One previous (nonrandomized) trial in community clinics found that CBT did not outperform usual care (UC). The present study used…

29 CFR 778.332 - Awards for activities not normally part of employee's job.

Code of Federal Regulations, 2010 CFR

2010-07-01

... amount of time, if any, spent by the employee in competing, the relationship between the contest activities and the usual work of the employee, whether the competition involves work usually performed by... employers, and the time spent by the employee in competing for such a prize (whether successfully or not) is...

Sachem: a chemical cartridge for high-performance substructure search.

PubMed

Kratochvíl, Miroslav; Vondrášek, Jiří; Galgonek, Jakub

2018-05-23

Structure search is one of the valuable capabilities of small-molecule databases. Fingerprint-based screening methods are usually employed to enhance the search performance by reducing the number of calls to the verification procedure. In substructure search, fingerprints are designed to capture important structural aspects of the molecule to aid the decision about whether the molecule contains a given substructure. Currently available cartridges typically provide acceptable search performance for processing user queries, but do not scale satisfactorily with dataset size. We present Sachem, a new open-source chemical cartridge that implements two substructure search methods: The first is a performance-oriented reimplementation of substructure indexing based on the OrChem fingerprint, and the second is a novel method that employs newly designed fingerprints stored in inverted indices. We assessed the performance of both methods on small, medium, and large datasets containing 1, 10, and 94 million compounds, respectively. Comparison of Sachem with other freely available cartridges revealed improvements in overall performance, scaling potential and screen-out efficiency. The Sachem cartridge allows efficient substructure searches in databases of all sizes. The sublinear performance scaling of the second method and the ability to efficiently query large amounts of pre-extracted information may together open the door to new applications for substructure searches.

A dynamical regularization algorithm for solving inverse source problems of elliptic partial differential equations

NASA Astrophysics Data System (ADS)

Zhang, Ye; Gong, Rongfang; Cheng, Xiaoliang; Gulliksson, Mårten

2018-06-01

This study considers the inverse source problem for elliptic partial differential equations with both Dirichlet and Neumann boundary data. The unknown source term is to be determined by additional boundary conditions. Unlike the existing methods found in the literature, which usually employ the first-order in time gradient-like system (such as the steepest descent methods) for numerically solving the regularized optimization problem with a fixed regularization parameter, we propose a novel method with a second-order in time dissipative gradient-like system and a dynamical selected regularization parameter. A damped symplectic scheme is proposed for the numerical solution. Theoretical analysis is given for both the continuous model and the numerical algorithm. Several numerical examples are provided to show the robustness of the proposed algorithm.

Why Third World Urban Employers Usually Prefer Men.

ERIC Educational Resources Information Center

Anker, Richard; Hein, Catherine

1985-01-01

Case studies provide evidence as to why Third World employers generally prefer male workers and consider certain jobs to be more suitable for men, and other jobs, much less numerous, to be more suitable for women. The authors also draw a number of distinctions between stereotype and fact. (Author/CT)

The application of feature selection to the development of Gaussian process models for percutaneous absorption.

PubMed

Lam, Lun Tak; Sun, Yi; Davey, Neil; Adams, Rod; Prapopoulou, Maria; Brown, Marc B; Moss, Gary P

2010-06-01

The aim was to employ Gaussian processes to assess mathematically the nature of a skin permeability dataset and to employ these methods, particularly feature selection, to determine the key physicochemical descriptors which exert the most significant influence on percutaneous absorption, and to compare such models with established existing models. Gaussian processes, including automatic relevance detection (GPRARD) methods, were employed to develop models of percutaneous absorption that identified key physicochemical descriptors of percutaneous absorption. Using MatLab software, the statistical performance of these models was compared with single linear networks (SLN) and quantitative structure-permeability relationships (QSPRs). Feature selection methods were used to examine in more detail the physicochemical parameters used in this study. A range of statistical measures to determine model quality were used. The inherently nonlinear nature of the skin data set was confirmed. The Gaussian process regression (GPR) methods yielded predictive models that offered statistically significant improvements over SLN and QSPR models with regard to predictivity (where the rank order was: GPR > SLN > QSPR). Feature selection analysis determined that the best GPR models were those that contained log P, melting point and the number of hydrogen bond donor groups as significant descriptors. Further statistical analysis also found that great synergy existed between certain parameters. It suggested that a number of the descriptors employed were effectively interchangeable, thus questioning the use of models where discrete variables are output, usually in the form of an equation. The use of a nonlinear GPR method produced models with significantly improved predictivity, compared with SLN or QSPR models. Feature selection methods were able to provide important mechanistic information. However, it was also shown that significant synergy existed between certain parameters, and as such it was possible to interchange certain descriptors (i.e. molecular weight and melting point) without incurring a loss of model quality. Such synergy suggested that a model constructed from discrete terms in an equation may not be the most appropriate way of representing mechanistic understandings of skin absorption.

Epidemic Reconstruction in a Phylogenetics Framework: Transmission Trees as Partitions of the Node Set

PubMed Central

Hall, Matthew; Woolhouse, Mark; Rambaut, Andrew

2015-01-01

The use of genetic data to reconstruct the transmission tree of infectious disease epidemics and outbreaks has been the subject of an increasing number of studies, but previous approaches have usually either made assumptions that are not fully compatible with phylogenetic inference, or, where they have based inference on a phylogeny, have employed a procedure that requires this tree to be fixed. At the same time, the coalescent-based models of the pathogen population that are employed in the methods usually used for time-resolved phylogeny reconstruction are a considerable simplification of epidemic process, as they assume that pathogen lineages mix freely. Here, we contribute a new method that is simultaneously a phylogeny reconstruction method for isolates taken from an epidemic, and a procedure for transmission tree reconstruction. We observe that, if one or more samples is taken from each host in an epidemic or outbreak and these are used to build a phylogeny, a transmission tree is equivalent to a partition of the set of nodes of this phylogeny, such that each partition element is a set of nodes that is connected in the full tree and contains all the tips corresponding to samples taken from one and only one host. We then implement a Monte Carlo Markov Chain (MCMC) procedure for simultaneous sampling from the spaces of both trees, utilising a newly-designed set of phylogenetic tree proposals that also respect node partitions. We calculate the posterior probability of these partitioned trees based on a model that acknowledges the population structure of an epidemic by employing an individual-based disease transmission model and a coalescent process taking place within each host. We demonstrate our method, first using simulated data, and then with sequences taken from the H7N7 avian influenza outbreak that occurred in the Netherlands in 2003. We show that it is superior to established coalescent methods for reconstructing the topology and node heights of the phylogeny and performs well for transmission tree reconstruction when the phylogeny is well-resolved by the genetic data, but caution that this will often not be the case in practice and that existing genetic and epidemiological data should be used to configure such analyses whenever possible. This method is available for use by the research community as part of BEAST, one of the most widely-used packages for reconstruction of dated phylogenies. PMID:26717515

Stereoselective synthesis from a process research perspective.

PubMed

Hillier, Michael C; Reider, Paul J

2002-03-01

The process chemists' primary responsibility is to develop efficient and reproducible syntheses of pharmaceutically active compounds. This task is complicated when dealing with chiral molecules that often must be made as single isomers according to regulatory guidelines. The presence of any isomeric impurity in the final product, even in small amounts, is usually not acceptable. This requirement necessitates an exquisite understanding of the methods employed in the construction of chiral drugs. However, the chemistry available for this purpose is sometimes limited and often requires a significant amount of effort and creativity to be made both functional and consistent.

Tolerancing aspheres based on manufacturing knowledge

NASA Astrophysics Data System (ADS)

Wickenhagen, S.; Kokot, S.; Fuchs, U.

2017-10-01

A standard way of tolerancing optical elements or systems is to perform a Monte Carlo based analysis within a common optical design software package. Although, different weightings and distributions are assumed they are all counting on statistics, which usually means several hundreds or thousands of systems for reliable results. Thus, employing these methods for small batch sizes is unreliable, especially when aspheric surfaces are involved. The huge database of asphericon was used to investigate the correlation between the given tolerance values and measured data sets. The resulting probability distributions of these measured data were analyzed aiming for a robust optical tolerancing process.

Tolerancing aspheres based on manufacturing statistics

NASA Astrophysics Data System (ADS)

Wickenhagen, S.; Möhl, A.; Fuchs, U.

2017-11-01

A standard way of tolerancing optical elements or systems is to perform a Monte Carlo based analysis within a common optical design software package. Although, different weightings and distributions are assumed they are all counting on statistics, which usually means several hundreds or thousands of systems for reliable results. Thus, employing these methods for small batch sizes is unreliable, especially when aspheric surfaces are involved. The huge database of asphericon was used to investigate the correlation between the given tolerance values and measured data sets. The resulting probability distributions of these measured data were analyzed aiming for a robust optical tolerancing process.

29 CFR 519.17 - Records to be kept.

Code of Federal Regulations, 2011 CFR

2011-07-01

... schools not longer than the usual summer vacation, the acceptance by the institution of the full-time...-TIME STUDENTS AT SUBMINIMUM WAGES Institutions of Higher Education § 519.17 Records to be kept. (a) The employer shall designate each worker employed as a full-time student under a full-time student certificate...

29 CFR 519.17 - Records to be kept.

Code of Federal Regulations, 2010 CFR

2010-07-01

... schools not longer than the usual summer vacation, the acceptance by the institution of the full-time...-TIME STUDENTS AT SUBMINIMUM WAGES Institutions of Higher Education § 519.17 Records to be kept. (a) The employer shall designate each worker employed as a full-time student under a full-time student certificate...

Evaluation Issues in the Comprehensive Employment and Training Act (CETA) Legislation.

ERIC Educational Resources Information Center

Spirer, Janet E.

Underutilization of evaluation findings relative to the Comprehensive Employment and Training Act (CETA) legislation may not stem primarily from factors usually identified in the literature (e.g., methodological reasons) but may be superseded by a more potent factor such as the prominence of the policy or program on the national agenda. Viewed…

Compulsory Unionism, the NLRB, and the Courts: A Legal Analysis of Union Security Agreements. Labor Relations and Public Policy Series Report No. 15.

ERIC Educational Resources Information Center

Haggard, Thomas R.

As used here, compulsory union or union security agreements are federally sanctioned contracts between a labor union and employer whereby the employer agrees to require his employees, as a condition of their employment, to affiliate with the union in some way. Right-to-work is usually construed to mean the liberty of the individual to have a job…

Impact of Technological and Structural Change on Employment. Prospective Analysis 2020. Synthesis Report. Report to the Committee on Employment and Social Affairs of the European Parliament. Technical Report Series.

ERIC Educational Resources Information Center

2001

The possible impact of technological and structural change on employment in the European Union (EU) over the next 20 years was examined through an exploration of the following alternative policy-driven scenarios: (1) business as usual; (2) concentrated technology policy (increases in innovation and research and development [R&D] efforts are…

Chapter 17: Residential Behavior Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W.; Stewart, James; Todd, Annika

Residential behavior-based (BB) programs use strategies grounded in the behavioral and social sciences to influence household energy use. These may include providing households with real-time or delayed feedback about their energy use; supplying energy efficiency education and tips; rewarding households for reducing their energy use; comparing households to their peers; and establishing games, tournaments, and competitions. BB programs often target multiple energy end uses and encourage energy savings, demand savings, or both. Savings from BB programs are usually a small percentage of energy use, typically less than 5 percent. Utilities will continue to implement residential BB programs as large-scale, randomizedmore » control trials (RCTs); however, some are now experimenting with alternative program designs that are smaller scale; involve new communication channels such as the web, social media, and text messaging; or that employ novel strategies for encouraging behavior change (for example, Facebook competitions). These programs will create new evaluation challenges and may require different evaluation methods than those currently employed to verify any savings they generate. Quasi-experimental methods, however, require stronger assumptions to yield valid savings estimates and may not measure savings with the same degree of validity and accuracy as randomized experiments.« less

Using photo-elicitation to understand reasons for repeated self-harm: a qualitative study.

PubMed

Edmondson, Amanda J; Brennan, Cathy; House, Allan O

2018-04-11

Reasons for self-harm are not well understood. One of the reasons for this is that first-hand accounts are usually elicited using traditional interview and questionnaire methods. This study aims to explore the acceptability of using an approach (photo-elicitation) that does not rely on solely verbal or written techniques, and to make a preliminary assessment of whether people can usefully employ images to support a discussion about the reasons why they self-harm. Interviews with eight participants using photo elicitation, a method in which photographs produced by the participant are used as a stimulus and guide within the interview. Participants responded positively to using images to support a discussion about their self-harm and readily incorporated images in the interview. Four main themes were identified representing negative and positive or adaptive purposes of self-harm: self-harm as a response to distress, self-harm to achieve mastery, self-harm as protective and self-harm as a language or form of communication. Employing this novel approach was useful in broadening our understanding of self-harm.

Atomic force microscopy of model lipid membranes.

PubMed

Morandat, Sandrine; Azouzi, Slim; Beauvais, Estelle; Mastouri, Amira; El Kirat, Karim

2013-02-01

Supported lipid bilayers (SLBs) are biomimetic model systems that are now widely used to address the biophysical and biochemical properties of biological membranes. Two main methods are usually employed to form SLBs: the transfer of two successive monolayers by Langmuir-Blodgett or Langmuir-Schaefer techniques, and the fusion of preformed lipid vesicles. The transfer of lipid films on flat solid substrates offers the possibility to apply a wide range of surface analytical techniques that are very sensitive. Among them, atomic force microscopy (AFM) has opened new opportunities for determining the nanoscale organization of SLBs under physiological conditions. In this review, we first focus on the different protocols generally employed to prepare SLBs. Then, we describe AFM studies on the nanoscale lateral organization and mechanical properties of SLBs. Lastly, we survey recent developments in the AFM monitoring of bilayer alteration, remodeling, or digestion, by incubation with exogenous agents such as drugs, proteins, peptides, and nanoparticles.

Rolling bearing fault feature learning using improved convolutional deep belief network with compressed sensing

NASA Astrophysics Data System (ADS)

Shao, Haidong; Jiang, Hongkai; Zhang, Haizhou; Duan, Wenjing; Liang, Tianchen; Wu, Shuaipeng

2018-02-01

The vibration signals collected from rolling bearing are usually complex and non-stationary with heavy background noise. Therefore, it is a great challenge to efficiently learn the representative fault features of the collected vibration signals. In this paper, a novel method called improved convolutional deep belief network (CDBN) with compressed sensing (CS) is developed for feature learning and fault diagnosis of rolling bearing. Firstly, CS is adopted for reducing the vibration data amount to improve analysis efficiency. Secondly, a new CDBN model is constructed with Gaussian visible units to enhance the feature learning ability for the compressed data. Finally, exponential moving average (EMA) technique is employed to improve the generalization performance of the constructed deep model. The developed method is applied to analyze the experimental rolling bearing vibration signals. The results confirm that the developed method is more effective than the traditional methods.

Modified complementary ensemble empirical mode decomposition and intrinsic mode functions evaluation index for high-speed train gearbox fault diagnosis

NASA Astrophysics Data System (ADS)

Chen, Dongyue; Lin, Jianhui; Li, Yanping

2018-06-01

Complementary ensemble empirical mode decomposition (CEEMD) has been developed for the mode-mixing problem in Empirical Mode Decomposition (EMD) method. Compared to the ensemble empirical mode decomposition (EEMD), the CEEMD method reduces residue noise in the signal reconstruction. Both CEEMD and EEMD need enough ensemble number to reduce the residue noise, and hence it would be too much computation cost. Moreover, the selection of intrinsic mode functions (IMFs) for further analysis usually depends on experience. A modified CEEMD method and IMFs evaluation index are proposed with the aim of reducing the computational cost and select IMFs automatically. A simulated signal and in-service high-speed train gearbox vibration signals are employed to validate the proposed method in this paper. The results demonstrate that the modified CEEMD can decompose the signal efficiently with less computation cost, and the IMFs evaluation index can select the meaningful IMFs automatically.

Kernel-aligned multi-view canonical correlation analysis for image recognition

NASA Astrophysics Data System (ADS)

Su, Shuzhi; Ge, Hongwei; Yuan, Yun-Hao

2016-09-01

Existing kernel-based correlation analysis methods mainly adopt a single kernel in each view. However, only a single kernel is usually insufficient to characterize nonlinear distribution information of a view. To solve the problem, we transform each original feature vector into a 2-dimensional feature matrix by means of kernel alignment, and then propose a novel kernel-aligned multi-view canonical correlation analysis (KAMCCA) method on the basis of the feature matrices. Our proposed method can simultaneously employ multiple kernels to better capture the nonlinear distribution information of each view, so that correlation features learned by KAMCCA can have well discriminating power in real-world image recognition. Extensive experiments are designed on five real-world image datasets, including NIR face images, thermal face images, visible face images, handwritten digit images, and object images. Promising experimental results on the datasets have manifested the effectiveness of our proposed method.

Centrifugal compressor design for electrically assisted boost

NASA Astrophysics Data System (ADS)

Y Yang, M.; Martinez-Botas, R. F.; Zhuge, W. L.; Qureshi, U.; Richards, B.

2013-12-01

Electrically assisted boost is a prominent method to solve the issues of transient lag in turbocharger and remains an optimized operation condition for a compressor due to decoupling from turbine. Usually a centrifugal compressor for gasoline engine boosting is operated at high rotational speed which is beyond the ability of an electric motor in market. In this paper a centrifugal compressor with rotational speed as 120k RPM and pressure ratio as 2.0 is specially developed for electrically assisted boost. A centrifugal compressor including the impeller, vaneless diffuser and the volute is designed by meanline method followed by 3D detailed design. Then CFD method is employed to predict as well as analyse the performance of the design compressor. The results show that the pressure ratio and efficiency at design point is 2.07 and 78% specifically.

Application of Canonical Effective Methods to Background-Independent Theories

NASA Astrophysics Data System (ADS)

Buyukcam, Umut

Effective formalisms play an important role in analyzing phenomena above some given length scale when complete theories are not accessible. In diverse exotic but physically important cases, the usual path-integral techniques used in a standard Quantum Field Theory approach seldom serve as adequate tools. This thesis exposes a new effective method for quantum systems, called the Canonical Effective Method, which owns particularly wide applicability in backgroundindependent theories as in the case of gravitational phenomena. The central purpose of this work is to employ these techniques to obtain semi-classical dynamics from canonical quantum gravity theories. Application to non-associative quantum mechanics is developed and testable results are obtained. Types of non-associative algebras relevant for magnetic-monopole systems are discussed. Possible modifications of hypersurface deformation algebra and the emergence of effective space-times are presented. iii.

Real-time quantitative Schlieren imaging by fast Fourier demodulation of a checkered backdrop

NASA Astrophysics Data System (ADS)

Wildeman, Sander

2018-06-01

A quantitative synthetic Schlieren imaging (SSI) method based on fast Fourier demodulation is presented. Instead of a random dot pattern (as usually employed in SSI), a 2D periodic pattern (such as a checkerboard) is used as a backdrop to the refractive object of interest. The range of validity and accuracy of this "Fast Checkerboard Demodulation" (FCD) method are assessed using both synthetic data and experimental recordings of patterns optically distorted by small waves on a water surface. It is found that the FCD method is at least as accurate as sophisticated, multi-stage, digital image correlation (DIC) or optical flow (OF) techniques used with random dot patterns, and it is significantly faster. Efficient, fully vectorized, implementations of both the FCD and DIC/OF schemes developed for this study are made available as open source Matlab scripts.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chhiber, R; Usmanov, AV; Matthaeus, WH

Simple estimates of the number of Coulomb collisions experienced by the interplanetary plasma to the point of observation, i.e., the “collisional age”, can be usefully employed in the study of non-thermal features of the solar wind. Usually these estimates are based on local plasma properties at the point of observation. Here we improve the method of estimation of the collisional age by employing solutions obtained from global three-dimensional magnetohydrodynamics simulations. This enables evaluation of the complete analytical expression for the collisional age without using approximations. The improved estimation of the collisional timescale is compared with turbulence and expansion timescales tomore » assess the relative importance of collisions. The collisional age computed using the approximate formula employed in previous work is compared with the improved simulation-based calculations to examine the validity of the simplified formula. We also develop an analytical expression for the evaluation of the collisional age and we find good agreement between the numerical and analytical results. Finally, we briefly discuss the implications for an improved estimation of collisionality along spacecraft trajectories, including Solar Probe Plus.« less

Substance Use, Education, Employment, and Criminal Activity Outcomes of Adolescents in Outpatient Chemical Dependency Programs

PubMed Central

Balsa, Ana I.; Homer, Jenny F.; French, Michael T.; Weisner, Constance M.

2010-01-01

Although the primary outcome of interest in clinical evaluations of addiction treatment programs is usually abstinence, participation in these programs can have a wide range of consequences. This study evaluated the effects of treatment initiation on substance use, school attendance, employment, and involvement in criminal activity at 12 months post-admission for 419 adolescents (aged 12 to 18) enrolled in chemical dependency recovery programs in a large managed care health plan. Instrumental variables estimation methods were used to account for unobserved selection into treatment by jointly modeling the likelihood of participation in treatment and the odds of attaining a certain outcome or level of an outcome. Treatment initiation significantly increased the likelihood of attending school, promoted abstinence, and decreased the probability of adolescent employment, but it did not significantly affect participation in criminal activity at the 12-month follow-up. These findings highlight the need to address selection in a non-experimental study and demonstrate the importance of considering multiple outcomes when assessing the effectiveness of adolescent treatment. PMID:18064572

A prospective examination of the impact of a supported employment program and employment on health-related quality of life, handicap, and disability among Veterans with SCI.

PubMed

Ottomanelli, Lisa; Barnett, Scott D; Goetz, Lance L

2013-10-01

To investigate impact of participation in a supported employment program and impact of employment itself on health-related quality of life (HRQOL), disability, and handicap among Veterans with spinal cord injury (SCI). We used a prospective, randomized, controlled, multi-site trial of supported employment (SE) versus treatment as usual (TAU) for vocational issues. Subjects were 157 Veterans with SCI who received either SE or TAU for vocational issues. Outcomes were examined in terms of type of vocational treatment received and whether competitive employment was obtained. Outcomes investigated were HRQOL as measured by the Veterans RAND 36-item health survey (VR-36), handicap as measured by the Craig Handicap Assessment and Reporting Technique (CHART), and disability as measured by the functional independence measure (FIM). Subjects were assessed at baseline and at 3, 6, 9, and 12 months. There were no significant differences between Veterans who participated in SE compared to those who received TAU in study measures. Participants obtaining competitive employment demonstrated significantly higher scores on the Social Integration, Mobility, and Occupation dimensions of the CHART. There were no observed differences in VR-36 scores or FIM scores for those obtaining competitive employment. This study suggests that employment has a positive effect on an individual's ability to participate in social relationships, move about their home and community, and spend time in productive and usual roles. Inability to detect differences across other domains of handicap or any changes in HRQOL may have been due to several factors including level and intensity of employment, insufficient follow-up period, or measurement limitations.

Interdisciplinary team-based care for patients with chronic pain on long-term opioid treatment in primary care (PPACT) – Protocol for a pragmatic cluster randomized trial

PubMed Central

DeBar, Lynn; Benes, Lindsay; Bonifay, Allison; Deyo, Richard A.; Elder, Charles R.; Keefe, Francis J.; Leo, Michael C.; McMullen, Carmit; Mayhew, Meghan; Owen-Smith, Ashli; Smith, David H.; Trinacty, Connie M.; Vollmer, William M.

2018-01-01

Background Chronic pain is one of the most common, disabling, and expensive public health problems in the United States. Interdisciplinary pain management treatments that employ behavioral approaches have been successful in helping patients with chronic pain reduce symptoms and regain functioning. However, most patients lack access to such treatments. We are conducting a pragmatic clinical trial to test the hypothesis that patients who receive an interdisciplinary biopsychosocial intervention, the Pain Program for Active Coping and Training (PPACT), at their primary care clinic will have a greater reduction in pain impact in the year following than patients receiving usual care. Methods/design This is an effectiveness-implementation hybrid pragmatic clinical trial in which we randomize clusters of primary care providers and their patients with chronic pain who are on long-term opioid therapy to 1) receive an interdisciplinary behavioral intervention in conjunction with their current health care or 2) continue with current health care services. Our primary outcome is pain impact (a composite of pain intensity and pain-related interference) measured using the PEG, a validated three-item assessment. Secondary outcomes include pain-related disability, patient satisfaction, opioids dispensed and health care utilization. An economic evaluation assesses the resources and costs necessary to deliver the intervention and its cost-effectiveness compared with usual care. A formative evaluation employs mixed methods to understand the context for implementation in the participating health care systems. Discussion This trial will inform the feasibility of implementing interdisciplinary behavioral approaches to pain management in the primary care setting, potentially providing a more effective, safer, and more satisfactory alternative to opioid-based chronic pain treatment. Clinical Trials Registration Number: NCT02113592 PMID:29522897

The Cost of Pay Equity in Public and Private Employment.

ERIC Educational Resources Information Center

National Committee on Pay Equity, Washington, DC.

Implementing the principle of equal pay for work of comparable value, usually called "pay equity" or "comparable worth," should not be a major problem for either the public or private sectors. Information was analyzed from a survey of 24 State and local public sector employers involved in the implementation of pay equity, telephone interviews with…

Pension Plans at Risk: A Potential Hazard of Deficit Reduction and Tax Reform.

ERIC Educational Resources Information Center

Logue, Dennis E.

The most widely used pension plans in the United States are defined-benefit plans under which employers pay workers a fixed pension, usually a percentage of their final salaries. Defined-contribution pension plans, under which employers and employees set aside funds that are invested for the employees, are growing in popularity and are…

[Return to work management of people with temporary disability].

PubMed

Okreglicka, Małgorzata

2011-01-01

There is a large and growing body of scientific evidence that return to work usually provides significant overall health benefit, and staying off work needlessly results in poorer overall health outcomes. Thus, employers, employees (patients), and insurers all benefit from individuals returning to work in usual time periods. Disability duration guidelines can be an important tool helping the injured workers to get back on the job. The return to work process needs to be accepted by all parties (physicians, employees, employers, insurers) as defensible, fair and evidence-based. "The medical disability advisor--Workplace guidelines for disability duration" by Presley Reed is the backbone of communication, understanding and measurement in case management programs, having great impact on many parties and steps during a case life cycle.

Early Recovery of Salmonella from Food Using a 6-Hour Non-selective Pre-enrichment and Reformulation of Tetrathionate Broth.

PubMed

Daquigan, Ninalynn; Grim, Christopher J; White, James R; Hanes, Darcy E; Jarvis, Karen G

2016-01-01

Culture based methods are commonly employed to detect pathogens in food and environmental samples. These methods are time consuming and complex, requiring multiple non-selective and selective enrichment broths, and usually take at least 1 week to recover and identify pathogens. Improving pathogen detection in foods is a primary goal for regulatory agencies and industry. Salmonella detection in food relies on a series of culture steps in broth formulations optimized to resuscitate Salmonella and reduce the abundance of competitive bacteria. Examples of non-selective pre-enrichment broths used to isolate Salmonella from food include Lactose, Universal Pre-enrichment, BPW, and Trypticase Soy broths. Tetrathionate (TT) and Rappaport-Vassiliadis (RV) broths are employed after a 24-h non-selective enrichment to select for Salmonella and hamper the growth of competitive bacteria. In this study, we tested a new formulation of TT broth that lacks brilliant green dye and has lower levels of TT . We employed this TT broth formulation in conjunction with a 6-h non-selective pre-enrichment period and determined that Salmonella recovery was possible one day earlier than standard food culture methods. We tested the shortened culture method in different non-selective enrichment broths, enumerated Salmonella in the non-selective enrichments, and used 16S rRNA gene sequencing to determine the proportional abundances of Salmonella in the TT and RV selective enrichments. Together these data revealed that a 6-h non-selective pre-enrichment reduces the levels of competitive bacteria inoculated into the selective TT and RV broths, enabling the recovery of Salmonella 1 day earlier than standard culture enrichment methods.

The pre-employment medical--ethical dilemmas for GPs.

PubMed

Thuraisingham, Chandramani; Nalliah, Sivalingam

2013-04-01

In many workplaces, employment is conditional on a successful pre-employment medical examination. This examination is usually conducted by a general practitioner on the employers' panel of approved clinics or by an in-house company doctor. This article uses a case study to illustrate some of the ethical dilemmas that may be faced by GPs in the course of performing a pre-employment medical examination. Ethical issues discussed in this article include: Is it ethical for employers (based on physicians' reports) to select workers based on 'absence of illness' rather than 'fitness for work'? Should physicians divulge the illness of potential workers to third parties? What are the boundaries of a clinician's duty of care in the pre-employment medical examination setting?

Study Protocol: effects of acupuncture on hot flushes in perimenopausal and postmenopausal women – a multicenter randomized clinical trial

PubMed Central

Kim, Kun-Hyung; Kang, Kyung-Won; Jung, Hee-Jung; Park, Ji-Eun; Jung, So-Young; Choi, Jun-Yong; Choi, Sun-Mi

2008-01-01

Background Hot flushes are the most frequent climacteric symptom and a major cause of suffering among menopausal women. The condition negatively influences many aspects of women's lives. To date, conventional hormone replacement therapy (HRT) is considered the most effective treatment for hot flushes. However, HRT is associated with a host of negative side effects. Complementary and alternative medical (CAM) approaches have been employed to relieve symptoms and to avoid these side effects. Acupuncture is one of the most strongly preferred CAM treatments for many diseases, causing few serious adverse effects, and is frequently used in Korea. We aim to evaluate the effectiveness of Traditional Korean Acupuncture (TKA) in conjunction with usual care, compared to usual care alone, on hot flushes in perimenopausal and postmenopausal women in Korea. Methods This study consists of a multi-center randomized controlled trial with 2 parallel arms. Participants included in the study will meet the following criteria: 1) a documented daily average hot flush score ≥ 10 for one week prior to the screening visit 2) not taking HRT and other pharmaceutical therapies which might affect hot flushes or other vasomotor symptoms. While maintaining usual care, the treatment group will receive acupuncture 3 times a week, for a total of 12 sessions over 4 weeks. The control group will receive usual care alone during the same period. Post-treatment follow-up will be performed one month after completing 12 sessions of acupuncture. Discussion This trial will provide evidence for the effectiveness of acupuncture as a treatment for hot flushes. The primary endpoint in both groups is a change in hot flush score from baseline to week 4 and/or week 8. As the secondary endpoint, we will employ the Menopause Rating Scale (MRS), a health-related quality of life questionnaire. Further analysis will examine the frequency, severity and difference in symptoms for daytime vs. nighttime hot flushes, sub-domain analysis of MRS, and participants' expectations of acupuncture treatment. Trial registration Current Controlled Trials ISRCTN49335612 PMID:19055763

Health trainer-led motivational intervention plus usual care for people under community supervision compared with usual care alone: a study protocol for a parallel-group pilot randomised controlled trial (STRENGTHEN).

PubMed

Thompson, Tom P; Callaghan, Lynne; Hazeldine, Emma; Quinn, Cath; Walker, Samantha; Byng, Richard; Wallace, Gary; Creanor, Siobhan; Green, Colin; Hawton, Annie; Annison, Jill; Sinclair, Julia; Senior, Jane; Taylor, Adrian H

2018-06-04

People with experience of the criminal justice system typically have worse physical and mental health, lower levels of mental well-being and have less healthy lifestyles than the general population. Health trainers have worked with offenders in the community to provide support for lifestyle change, enhance mental well-being and signpost to appropriate services. There has been no rigorous evaluation of the effectiveness and cost-effectiveness of providing such community support. This study aims to determine the feasibility and acceptability of conducting a randomised trial and delivering a health trainer intervention to people receiving community supervision in the UK. A multicentre, parallel, two-group randomised controlled trial recruiting 120 participants with 1:1 individual allocation to receive support from a health trainer and usual care or usual care alone, with mixed methods process evaluation. Participants receive community supervision from an offender manager in either a Community Rehabilitation Company or the National Probation Service. If they have served a custodial sentence, then they have to have been released for at least 2 months. The supervision period must have at least 7 months left at recruitment. Participants are interested in receiving support to change diet, physical activity, alcohol use and smoking and/or improve mental well-being. The primary outcome is mental well-being with secondary outcomes related to smoking, physical activity, alcohol consumption and diet. The primary outcome will inform sample size calculations for a definitive trial. The study has been approved by the Health and Care Research Wales Ethics Committee (REC reference 16/WA/0171). Dissemination will include publication of the intervention development process and findings for the stated outcomes, parallel process evaluation and economic evaluation in peer-reviewed journals. Results will also be disseminated to stakeholders and trial participants. ISRCTN80475744; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Enhancing “usual practice” Treatment Foster Care: Findings from a randomized trial on improving youth outcomes

PubMed Central

Farmer, Elizabeth M.Z.; Burns, Barbara J.; Wagner, H. Ryan; Murray, Maureen; Southerland, Dannia G.

2009-01-01

Objectives This article reports the initial findings from a randomized trial to enhance Treatment Foster Care (TFC) in “usual care” agencies. The intervention, Together Facing the Challenge, was built upon a combination of practice-based elements from a prior descriptive study of TFC and selected elements from Chamberlain’s evidence-based model (MTFC) to fill conspicuous gaps in usual practice. The study was designed to examine whether additional training and consultation to staff and treatment parents improved outcomes for youth. Methods The study was conducted with 247 youth in TFC and their treatment parents from 14 TFC agencies in a southeastern state. Half of the agencies were randomized to the intervention condition and received study-provided training and consultation. Control agencies continued to provide training and treatment as usual. Data for the current analyses come from interviews with treatment parents at baseline, 6, and 12 months. Results Youth in the intervention group showed significant improvement (compared to the youth in the control group) on the three focal domains – symptoms, behaviors, and strengths. Effects were larger for behaviors and symptoms than for strengths. Conclusions This study employs a “hybrid” model to improve practice. It builds upon current practices in existing agencies and infuses additional training and consultation to overcome observed deficits. Such an approach has tremendous potential for moving beyond a singular focus on disseminating evidence-based interventions to a broader view of improving practice in a wide range of agencies. PMID:20513677

Comparison and prediction of chirping in NSTX and DIII-D

NASA Astrophysics Data System (ADS)

Duarte, Vinicius; Berk, Herbert; Gorelenkov, Nikolai; Heidbrink, William; Kramer, Gerrit; Nazikian, Raffi; Pace, David; Podesta, Mario; van Zeeland, Michael

2016-10-01

We present an explanation of why frequency chirping of Alfven waves is ubiquitous in NSTX and rarely observed in DIII-D. A time-delayed cubic nonlinear equation is employed for the study of the onset of nonlinear phase-space structures. Its explosive solutions are chirping precursors. We employ NOVA and NOVA-K codes to provide consistent Alfvenic eigenmodes and weighted physical contributions from all regions of phase space. In addition, TRANSP is employed to determine the diffusivity needed to fulfill power balance. Though background micro-turbulence is usually unimportant in determining the energetic particle spatial profile, it may still be important with regard to whether chirping structures likely form. We show that the energetic particle micro-turbulent induced scattering often competes with collisional pitch-angle scattering. This competition explains the tendency for NSTX, where micro-turbulence is weak, to exhibit Alfvénic chirping, whereas in DIII-D turbulent diffusion usually dominates and chirping is not observed except when micro-turbulence markedly reduces.

A Computerized Decision Support System for Depression in Primary Care

PubMed Central

Kurian, Benji T.; Trivedi, Madhukar H.; Grannemann, Bruce D.; Claassen, Cynthia A.; Daly, Ella J.; Sunderajan, Prabha

2009-01-01

Objective: In 2004, results from The Texas Medication Algorithm Project (TMAP) showed better clinical outcomes for patients whose physicians adhered to a paper-and-pencil algorithm compared to patients who received standard clinical treatment for major depressive disorder (MDD). However, implementation of and fidelity to the treatment algorithm among various providers was observed to be inadequate. A computerized decision support system (CDSS) for the implementation of the TMAP algorithm for depression has since been developed to improve fidelity and adherence to the algorithm. Method: This was a 2-group, parallel design, clinical trial (one patient group receiving MDD treatment from physicians using the CDSS and the other patient group receiving usual care) conducted at 2 separate primary care clinics in Texas from March 2005 through June 2006. Fifty-five patients with MDD (DSM-IV criteria) with no significant difference in disease characteristics were enrolled, 32 of whom were treated by physicians using CDSS and 23 were treated by physicians using usual care. The study's objective was to evaluate the feasibility and efficacy of implementing a CDSS to assist physicians acutely treating patients with MDD compared to usual care in primary care. Primary efficacy outcomes for depression symptom severity were based on the 17-item Hamilton Depression Rating Scale (HDRS17) evaluated by an independent rater. Results: Patients treated by physicians employing CDSS had significantly greater symptom reduction, based on the HDRS17, than patients treated with usual care (P < .001). Conclusions: The CDSS algorithm, utilizing measurement-based care, was superior to usual care for patients with MDD in primary care settings. Larger randomized controlled trials are needed to confirm these findings. Trial Registration: clinicaltrials.gov Identifier: NCT00551083 PMID:19750065

Communication: spin-boson model with diagonal and off-diagonal coupling to two independent baths: ground-state phase transition in the deep sub-Ohmic regime.

PubMed

Zhao, Yang; Yao, Yao; Chernyak, Vladimir; Zhao, Yang

2014-04-28

We investigate a spin-boson model with two boson baths that are coupled to two perpendicular components of the spin by employing the density matrix renormalization group method with an optimized boson basis. It is revealed that in the deep sub-Ohmic regime there exists a novel second-order phase transition between two types of doubly degenerate states, which is reduced to one of the usual types for nonzero tunneling. In addition, it is found that expectation values of the spin components display jumps at the phase boundary in the absence of bias and tunneling.

Electromyogram as a measure of heavy metal toxicity in fresh water and salt water mussels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kidder, G.W. III; McCoy, A.A.

1996-02-01

The response of bivalves to heavy metals and other toxins has usually been determined by observing valve position. Since mussels close their valves to avoid noxious stimuli, experimental delivery of chemicals ins uncertain. To obtain constant results plastic spacers can be employed to hold the valves apart. This obviates valve position as an index of response and some other method is required. Electromyography of intact mussels is one such index, giving a simple, effective, and quantitative measurement of activity. Experiments are reported in this article on the effects of added mercury on salt water and fresh water species.

Towards increase of diagnostic efficacy in gynecologic OCT

NASA Astrophysics Data System (ADS)

Kirillin, Mikhail; Panteleeva, Olga; Eliseeva, Darya; Kachalina, Olga; Sergeeva, Ekaterina; Dubasova, Lyubov; Agrba, Pavel; Mikailova, Gyular; Prudnikov, Maxim; Shakhova, Natalia

2013-06-01

Gynecologic applications of optical coherence tomography (OCT) are usually performed in combination with routine diagnostic procedures: laparoscopy and colposcopy. In combination with laparoscopy OCT is employed for inspection of fallopian tubes in cases of unrecognized infertility while in colposcopy it is used to identify cervix pathologies including cancer. In this paper we discuss methods for increasing diagnostic efficacy of OCT application in these procedures. For OCT-laparoscopy we demonstrate independent criteria for pathology recognition which allow to increase accuracy of diagnostics. For OCT-colposcopy we report on application of device for controlled compression allowing to sense the elasticity of the inspected cervix area and distinguish between neoplasia and inflammatory processes.

29 CFR 780.322 - Is employed on the same farm as his parent or persons standing in the place of his parent.

Code of Federal Regulations, 2011 CFR

2011-07-01

... RELATED TO REGULATIONS EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND... “employed on the same farm” are accorded their natural meaning with the usual caution, however, that as in the case of all other exemptions, the exemptive language is to be construed narrowly. (See § 780.2...

29 CFR 780.322 - Is employed on the same farm as his parent or persons standing in the place of his parent.

Code of Federal Regulations, 2010 CFR

2010-07-01

... RELATED TO REGULATIONS EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND... “employed on the same farm” are accorded their natural meaning with the usual caution, however, that as in the case of all other exemptions, the exemptive language is to be construed narrowly. (See § 780.2...

29 CFR 780.322 - Is employed on the same farm as his parent or persons standing in the place of his parent.

Code of Federal Regulations, 2014 CFR

2014-07-01

... RELATED TO REGULATIONS EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND... “employed on the same farm” are accorded their natural meaning with the usual caution, however, that as in the case of all other exemptions, the exemptive language is to be construed narrowly. (See § 780.2...

29 CFR 780.322 - Is employed on the same farm as his parent or persons standing in the place of his parent.

Code of Federal Regulations, 2013 CFR

2013-07-01

... RELATED TO REGULATIONS EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND... “employed on the same farm” are accorded their natural meaning with the usual caution, however, that as in the case of all other exemptions, the exemptive language is to be construed narrowly. (See § 780.2...

29 CFR 780.322 - Is employed on the same farm as his parent or persons standing in the place of his parent.

Code of Federal Regulations, 2012 CFR

2012-07-01

... RELATED TO REGULATIONS EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND... “employed on the same farm” are accorded their natural meaning with the usual caution, however, that as in the case of all other exemptions, the exemptive language is to be construed narrowly. (See § 780.2...

A randomized clinical trial of a telephone depression intervention to reduce employee presenteeism and absenteeism.

PubMed

Lerner, Debra; Adler, David A; Rogers, William H; Chang, Hong; Greenhill, Annabel; Cymerman, Elina; Azocar, Francisca

2015-06-01

The study tested an intervention aimed at improving work functioning among middle-aged and older adults with depression and work limitations. A randomized clinical trial allocated an initial sample of 431 eligible employed adults (age ≥45) to a work-focused intervention (WFI) or usual care. Inclusion criteria were depression as measured by the Patient Health Questionnaire-9 (PHQ-9) and at-work limitations indicated by a productivity loss score ≥5% on the Work Limitations Questionnaire (WLQ). Study sites included 19 employers and five related organizations. Telephone-based counseling provided three integrated modalities: care coordination, cognitive-behavioral therapy strategy development, and work coaching and modification. Effectiveness (change in productivity loss scores from preintervention to four months postintervention) was tested with mixed models adjusted for confounders. Secondary outcomes included change in WLQ work performance scales, self-reported absences, and depression. Of 1,227 eligible employees (7% of screened), 431 (35%) enrolled and 380 completed the study (12% attrition). At-work productivity loss improved 44% in the WFI group versus 13% in usual care (difference in change, p<.001). WFI group scores on the four WLQ scales improved 44% to 47%, significantly better than in usual care (p<.001 for each scale). Absence days declined by 53% in the WFI group versus 13% in usual care (difference in change, p<.001). Mean PHQ-9 depression symptom severity scores declined 51% for WFI versus 26% for usual care (difference in change, p<.001). The WFI was more effective than usual care at four-month follow-up. Given increasing efforts to provide more patient-centered, value-based care, the WFI could be an important resource.

Study on photon transport problem based on the platform of molecular optical simulation environment.

PubMed

Peng, Kuan; Gao, Xinbo; Liang, Jimin; Qu, Xiaochao; Ren, Nunu; Chen, Xueli; Ma, Bin; Tian, Jie

2010-01-01

As an important molecular imaging modality, optical imaging has attracted increasing attention in the recent years. Since the physical experiment is usually complicated and expensive, research methods based on simulation platforms have obtained extensive attention. We developed a simulation platform named Molecular Optical Simulation Environment (MOSE) to simulate photon transport in both biological tissues and free space for optical imaging based on noncontact measurement. In this platform, Monte Carlo (MC) method and the hybrid radiosity-radiance theorem are used to simulate photon transport in biological tissues and free space, respectively, so both contact and noncontact measurement modes of optical imaging can be simulated properly. In addition, a parallelization strategy for MC method is employed to improve the computational efficiency. In this paper, we study the photon transport problems in both biological tissues and free space using MOSE. The results are compared with Tracepro, simplified spherical harmonics method (SP(n)), and physical measurement to verify the performance of our study method on both accuracy and efficiency.

Study on Photon Transport Problem Based on the Platform of Molecular Optical Simulation Environment

PubMed Central

Peng, Kuan; Gao, Xinbo; Liang, Jimin; Qu, Xiaochao; Ren, Nunu; Chen, Xueli; Ma, Bin; Tian, Jie

2010-01-01

As an important molecular imaging modality, optical imaging has attracted increasing attention in the recent years. Since the physical experiment is usually complicated and expensive, research methods based on simulation platforms have obtained extensive attention. We developed a simulation platform named Molecular Optical Simulation Environment (MOSE) to simulate photon transport in both biological tissues and free space for optical imaging based on noncontact measurement. In this platform, Monte Carlo (MC) method and the hybrid radiosity-radiance theorem are used to simulate photon transport in biological tissues and free space, respectively, so both contact and noncontact measurement modes of optical imaging can be simulated properly. In addition, a parallelization strategy for MC method is employed to improve the computational efficiency. In this paper, we study the photon transport problems in both biological tissues and free space using MOSE. The results are compared with Tracepro, simplified spherical harmonics method (S P n), and physical measurement to verify the performance of our study method on both accuracy and efficiency. PMID:20445737

Whole-heart magnetic resonance coronary angiography with multiple breath-holds and automatic breathing-level tracking

NASA Astrophysics Data System (ADS)

Kuhara, Shigehide; Ninomiya, Ayako; Okada, Tomohisa; Kanao, Shotaro; Kamae, Toshikazu; Togashi, Kaori

2010-05-01

Whole-heart (WH) magnetic resonance coronary angiography (MRCA) studies are usually performed during free breathing while monitoring the position of the diaphragm with real-time motion correction. However, this results in a long scan time and the patient's breathing pattern may change, causing the study to be aborted. Alternatively, WH MRCA can be performed with multiple breath-holds (mBH). However, one problem in the mBH method is that patients cannot hold their breath at the same position every time, leading to image degradation. We have developed a new WH MRCA imaging method that employs both the mBH method and automatic breathing-level tracking to permit automatic tracking of the changes in breathing or breath-hold levels. Evaluation of its effects on WH MRCA image quality showed that this method can provide high-quality images within a shorter scan time. This proposed method is expected to be very useful in clinical WH MRCA studies.

An efficient 3D R-tree spatial index method for virtual geographic environments

NASA Astrophysics Data System (ADS)

Zhu, Qing; Gong, Jun; Zhang, Yeting

A three-dimensional (3D) spatial index is required for real time applications of integrated organization and management in virtual geographic environments of above ground, underground, indoor and outdoor objects. Being one of the most promising methods, the R-tree spatial index has been paid increasing attention in 3D geospatial database management. Since the existing R-tree methods are usually limited by their weakness of low efficiency, due to the critical overlap of sibling nodes and the uneven size of nodes, this paper introduces the k-means clustering method and employs the 3D overlap volume, 3D coverage volume and the minimum bounding box shape value of nodes as the integrative grouping criteria. A new spatial cluster grouping algorithm and R-tree insertion algorithm is then proposed. Experimental analysis on comparative performance of spatial indexing shows that by the new method the overlap of R-tree sibling nodes is minimized drastically and a balance in the volumes of the nodes is maintained.

A segmentation and classification scheme for single tooth in MicroCT images based on 3D level set and k-means+.

PubMed

Wang, Liansheng; Li, Shusheng; Chen, Rongzhen; Liu, Sze-Yu; Chen, Jyh-Cheng

2017-04-01

Accurate classification of different anatomical structures of teeth from medical images provides crucial information for the stress analysis in dentistry. Usually, the anatomical structures of teeth are manually labeled by experienced clinical doctors, which is time consuming. However, automatic segmentation and classification is a challenging task because the anatomical structures and surroundings of the tooth in medical images are rather complex. Therefore, in this paper, we propose an effective framework which is designed to segment the tooth with a Selective Binary and Gaussian Filtering Regularized Level Set (GFRLS) method improved by fully utilizing 3 dimensional (3D) information, and classify the tooth by employing unsupervised learning i.e., k-means++ method. In order to evaluate the proposed method, the experiments are conducted on the sufficient and extensive datasets of mandibular molars. The experimental results show that our method can achieve higher accuracy and robustness compared to other three clustering methods. Copyright © 2016 Elsevier Ltd. All rights reserved.

Scaling properties of the aerodynamic noise generated by low-speed fans

NASA Astrophysics Data System (ADS)

Canepa, Edward; Cattanei, Andrea; Mazzocut Zecchin, Fabio

2017-11-01

The spectral decomposition algorithm presented in the paper may be applied to selected parts of the SPL spectrum, i.e. to specific noise generating mechanisms. It yields the propagation and the generation functions, and indeed the Mach number scaling exponent associated with each mechanism as a function of the Strouhal number. The input data are SPL spectra obtained from measurements taken during speed ramps. Firstly, the basic theory and the implemented algorithm are described. Then, the behaviour of the new method is analysed with reference to numerically generated spectral data and the results are compared with the ones of an existing method based on the assumption that the scaling exponent is constant. Guidelines for the employment of both methods are provided. Finally, the method is applied to measurements taken on a cooling fan mounted on a test plenum designed following the ISO 10302 standards. The most common noise generating mechanisms are present and attention is focused on the low-frequency part of the spectrum, where the mechanisms are superposed. Generally, both propagation and generation functions are determined with better accuracy than the scaling exponent, whose values are usually consistent with expectations based on coherence and compactness of the acoustic sources. For periodic noise, the computed exponent is less accurate, as the related SPL data set has usually a limited size. The scaling exponent is very sensitive to the details of the experimental data, e.g. to slight inconsistencies or random errors.

A sampling and classification item selection approach with content balancing.

PubMed

Chen, Pei-Hua

2015-03-01

Existing automated test assembly methods typically employ constrained combinatorial optimization. Constructing forms sequentially based on an optimization approach usually results in unparallel forms and requires heuristic modifications. Methods based on a random search approach have the major advantage of producing parallel forms sequentially without further adjustment. This study incorporated a flexible content-balancing element into the statistical perspective item selection method of the cell-only method (Chen et al. in Educational and Psychological Measurement, 72(6), 933-953, 2012). The new method was compared with a sequential interitem distance weighted deviation model (IID WDM) (Swanson & Stocking in Applied Psychological Measurement, 17(2), 151-166, 1993), a simultaneous IID WDM, and a big-shadow-test mixed integer programming (BST MIP) method to construct multiple parallel forms based on matching a reference form item-by-item. The results showed that the cell-only method with content balancing and the sequential and simultaneous versions of IID WDM yielded results comparable to those obtained using the BST MIP method. The cell-only method with content balancing is computationally less intensive than the sequential and simultaneous versions of IID WDM.

The cathode material for a plasma-arc heater

NASA Astrophysics Data System (ADS)

Yelyutin, A. V.; Berlin, I. K.; Averyanov, V. V.; Kadyshevskii, V. S.; Savchenko, A. A.; Putintseva, R. G.

1983-11-01

The cathode of a plasma arc heater experiences a large thermal load. The temperature of its working surface, which is in contact with the plasma, reaches high values, as a result of which the electrode material is subject to erosion. Refractory metals are usually employed for the cathode material, but because of the severe erosion do not usually have a long working life. The most important electrophysical characteristic of the electrode is the electron work function. The use of materials with a low electron work function allows a decrease in the heat flow to the cathode, and this leads to an increase in its erosion resistance and working life. The electroerosion of certain materials employed for the cathode in an electric arc plasma generator in the process of reduction smelting of refractory metals was studied.

Watershed reliability, resilience and vulnerability analysis under uncertainty using water quality data.

PubMed

Hoque, Yamen M; Tripathi, Shivam; Hantush, Mohamed M; Govindaraju, Rao S

2012-10-30

A method for assessment of watershed health is developed by employing measures of reliability, resilience and vulnerability (R-R-V) using stream water quality data. Observed water quality data are usually sparse, so that a water quality time-series is often reconstructed using surrogate variables (streamflow). A Bayesian algorithm based on relevance vector machine (RVM) was employed to quantify the error in the reconstructed series, and a probabilistic assessment of watershed status was conducted based on established thresholds for various constituents. As an application example, observed water quality data for several constituents at different monitoring points within the Cedar Creek watershed in north-east Indiana (USA) were utilized. Considering uncertainty in the data for the period 2002-2007, the R-R-V analysis revealed that the Cedar Creek watershed tends to be in compliance with respect to selected pesticides, ammonia and total phosphorus. However, the watershed was found to be prone to violations of sediment standards. Ignoring uncertainty in the water quality time-series led to misleading results especially in the case of sediments. Results indicate that the methods presented in this study may be used for assessing the effects of different stressors over a watershed. The method shows promise as a management tool for assessing watershed health. Copyright © 2012 Elsevier Ltd. All rights reserved.

Structural, dynamical & electronic properties of CaCuO{sub 2}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agrawal, B.K.; Agrawal, S.

1994-12-31

The scalar relativistic version of an accurate first principles full potential self- consistent linearized muffin tin orbital (LMTO) method has been employed for describing the physical properties of the parent system of the high-Tc oxide superconductors, i.e., CaCuO2. The presently employed modified version of the LMTO method is quite fast and goes beyond the usual LMTO-ASA method in the sense that it permits a completely general shape of the potential and the charge density. Also, in contrast to LMTO-ASA, the present method is also capable of treating distorted lattice structures accurately. The calculated values of the lattice parameters of puremore » CaCuO2 lie within 3% of the experimentally measured values for the Sr-doped system Ca(.86)Sr(.14)CuO(2). The computed electronic structures and the density of states is quite similar to those of the other oxide superconductors, except of their three- dimensional character because of the presence of strong coupling between the closely spaced CuO2 layers. The van Hove singularity peak appears slightly below the Fermi level and a small concentration of oxygenation /or/ substitutional doping may pin it as the Fermi level. The calculated frequencies for some symmetric frozen phonons for undoped CaCuO2 are quite near to the measured data for the Sr-doped CaCuO2.« less

Analytical methods applied to diverse types of Brazilian propolis

PubMed Central

2011-01-01

Propolis is a bee product, composed mainly of plant resins and beeswax, therefore its chemical composition varies due to the geographic and plant origins of these resins, as well as the species of bee. Brazil is an important supplier of propolis on the world market and, although green colored propolis from the southeast is the most known and studied, several other types of propolis from Apis mellifera and native stingless bees (also called cerumen) can be found. Propolis is usually consumed as an extract, so the type of solvent and extractive procedures employed further affect its composition. Methods used for the extraction; analysis the percentage of resins, wax and insoluble material in crude propolis; determination of phenolic, flavonoid, amino acid and heavy metal contents are reviewed herein. Different chromatographic methods applied to the separation, identification and quantification of Brazilian propolis components and their relative strengths are discussed; as well as direct insertion mass spectrometry fingerprinting. Propolis has been used as a popular remedy for several centuries for a wide array of ailments. Its antimicrobial properties, present in propolis from different origins, have been extensively studied. But, more recently, anti-parasitic, anti-viral/immune stimulating, healing, anti-tumor, anti-inflammatory, antioxidant and analgesic activities of diverse types of Brazilian propolis have been evaluated. The most common methods employed and overviews of their relative results are presented. PMID:21631940

Methods for the accurate estimation of confidence intervals on protein folding ϕ-values

PubMed Central

Ruczinski, Ingo; Sosnick, Tobin R.; Plaxco, Kevin W.

2006-01-01

ϕ-Values provide an important benchmark for the comparison of experimental protein folding studies to computer simulations and theories of the folding process. Despite the growing importance of ϕ measurements, however, formulas to quantify the precision with which ϕ is measured have seen little significant discussion. Moreover, a commonly employed method for the determination of standard errors on ϕ estimates assumes that estimates of the changes in free energy of the transition and folded states are independent. Here we demonstrate that this assumption is usually incorrect and that this typically leads to the underestimation of ϕ precision. We derive an analytical expression for the precision of ϕ estimates (assuming linear chevron behavior) that explicitly takes this dependence into account. We also describe an alternative method that implicitly corrects for the effect. By simulating experimental chevron data, we show that both methods accurately estimate ϕ confidence intervals. We also explore the effects of the commonly employed techniques of calculating ϕ from kinetics estimated at non-zero denaturant concentrations and via the assumption of parallel chevron arms. We find that these approaches can produce significantly different estimates for ϕ (again, even for truly linear chevron behavior), indicating that they are not equivalent, interchangeable measures of transition state structure. Lastly, we describe a Web-based implementation of the above algorithms for general use by the protein folding community. PMID:17008714

Structural, dynamical and electronic properties of CaCuO2

NASA Technical Reports Server (NTRS)

Agrawal, Bal K.; Agrawal, Savitri

1995-01-01

The scalar relativistic version of an accurate first principles full potential self-consistent linearized muffin tin orbital (LMTO) method has been employed for describing the physical properties of the parent system of the high-T(sub c) oxide superconductors, i.e., CaCuO2. The presently employed modified version of the LMTO method is quite fast and goes beyond the usual LMTO ASA method in the sense that it permits a completely general shape of the potential and the charge density. Also, in contrast to LMTO ASA, the present method is also capable of treating distorted lattice structures accurately. The calculated values of the lattice parameters of pure CaCuO2 lie within 3% of the experimentally measured values for the Sr-doped system Ca(0.86)Sr(0.14)CuO(2). The computed electronic structures and the density of states is quite similar to those of the other oxide superconductors, except of their three- dimensional character because of the presence of strong coupling between the closely spaced CuO2 layers. The van Hove singularity peak appears slightly below the Fermi level and a small concentration of oxygenation /or/ substitutional doping may pin it at the Fermi level. The calculated frequencies for some symmetric frozen phonons for undoped CaCuO2 are quite near to the measured data for the Sr-doped CaCuO2.

Diagnosing a Strong-Fault Model by Conflict and Consistency

PubMed Central

Zhou, Gan; Feng, Wenquan

2018-01-01

The diagnosis method for a weak-fault model with only normal behaviors of each component has evolved over decades. However, many systems now demand a strong-fault models, the fault modes of which have specific behaviors as well. It is difficult to diagnose a strong-fault model due to its non-monotonicity. Currently, diagnosis methods usually employ conflicts to isolate possible fault and the process can be expedited when some observed output is consistent with the model’s prediction where the consistency indicates probably normal components. This paper solves the problem of efficiently diagnosing a strong-fault model by proposing a novel Logic-based Truth Maintenance System (LTMS) with two search approaches based on conflict and consistency. At the beginning, the original a strong-fault model is encoded by Boolean variables and converted into Conjunctive Normal Form (CNF). Then the proposed LTMS is employed to reason over CNF and find multiple minimal conflicts and maximal consistencies when there exists fault. The search approaches offer the best candidate efficiency based on the reasoning result until the diagnosis results are obtained. The completeness, coverage, correctness and complexity of the proposals are analyzed theoretically to show their strength and weakness. Finally, the proposed approaches are demonstrated by applying them to a real-world domain—the heat control unit of a spacecraft—where the proposed methods are significantly better than best first and conflict directly with A* search methods. PMID:29596302

Becoming Self-Employed in Mid and Late Life: Predictors and Consequences.

ERIC Educational Resources Information Center

Daum, Menachem

Although self-employment is of interest to many salaried workers who wish to change careers or continue working past the usual retirement age, little is known about the experiences of those who have actually made such a change. Of the 2,326 salaried men who were between the ages of 45 and 59 when interviewed in 1966 as part of the National…

Employer Provisions for Parental Leave.

ERIC Educational Resources Information Center

Meisenheimer, Joseph R., II

1989-01-01

Slightly more than one-third of full-time employees in medium and large firms in private industry were covered by maternity- or paternity-leave policies; days off were usually leave without pay. (Author)

Transient risk factors for acute traumatic hand injuries: a case‐crossover study in Hong Kong

PubMed Central

Chow, C Y; Lee, H; Lau, J; Yu, I T S

2007-01-01

Objectives To identify the remediable transient risk factors of occupational hand injuries in Hong Kong in order to guide the development of prevention strategies. Methods The case‐crossover study design was adopted. Study subjects were workers with acute hand injuries presenting to the government Occupational Medicine Unit for compensation claims within 90 days from the date of injury. Detailed information on exposures to specific transient factors during the 60 minutes prior to the occurrence of the injury, during the same time interval on the day prior to the injury, as well as the usual exposure during the past work‐month was obtained through telephone interviews. Both matched‐pair interval approach and usual frequency approach were adopted to assess the associations between transient exposures in the workplace and the short‐term risk of sustaining a hand injury. Results A total of 196 injured workers were interviewed. The results of the matched‐pair interval analysis matched well with the results obtained using the usual frequency analysis. Seven significant transient risk factors were identified: using malfunctioning equipment/materials, using a different work method, performing an unusual work task, working overtime, feeling ill, being distracted and rushing, with odds ratios ranging from 10.5 to 26.0 in the matched‐pair interval analysis and relative risks ranging between 8.0 and 28.3 with the usual frequency analysis. Wearing gloves was found to have an insignificant protective effect on the occurrence of hand injury in both analyses. Conclusions Using the case‐crossover study design for acute occupational hand injuries, seven transient risk factors that were mostly modifiable were identified. It is suggested that workers and their employers should increase their awareness of these risk factors, and efforts should be made to avoid exposures to these factors by means of engineering and administrative controls supplemented by safety education and training. PMID:16973734

Matrix-free and material-enhanced laser desorption/ionization mass spectrometry for the analysis of low molecular weight compounds.

PubMed

Rainer, Matthias; Qureshi, Muhammad Nasimullah; Bonn, Günther Karl

2011-06-01

The application of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) for the analysis of low molecular weight (LMW) compounds, such as pharmacologically active constituents or metabolites, is usually hampered by employing conventional MALDI matrices owing to interferences caused by matrix molecules below 700 Da. As a consequence, interpretation of mass spectra remains challenging, although matrix suppression can be achieved under certain conditions. Unlike the conventional MALDI methods which usually suffer from background signals, matrix-free techniques have become more and more popular for the analysis of LMW compounds. In this review we describe recently introduced materials for laser desorption/ionization (LDI) as alternatives to conventionally applied MALDI matrices. In particular, we want to highlight a new method for LDI which is referred to as matrix-free material-enhanced LDI (MELDI). In matrix-free MELDI it could be clearly shown, that besides chemical functionalities, the material's morphology plays a crucial role regarding energy-transfer capabilities. Therefore, it is of great interest to also investigate parameters such as particle size and porosity to study their impact on the LDI process. Especially nanomaterials such as diamond-like carbon, C(60) fullerenes and nanoparticulate silica beads were found to be excellent energy-absorbing materials in matrix-free MELDI.

Measurement of laser quantum frequency fluctuations using a Pound-Drever stabilization system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Y.J.; Mussche, P.L.; Siegman, A.E.

1994-06-01

The authors describe a method for measuring the frequency fluctuation spectrum of a laser oscillator, especially the weak noise contributions in the wings of the spectrum, and apply this method to confirm the existence of large excess quantum frequency fluctuations in a laser oscillator using an unstable optical resonator. The measurement apparatus uses the Pound-Drever technique, which employs an RF phase modulator and a Fabry-Perot cavity to produce a sensitive high-speed frequency discrimination signal. The authors show that this signal can also be used to measure the quantum noise contributions to the frequency spectrum of a laser oscillator. Experimental measurementsmore » on a miniature diode-pumped Nd:YAG laser using a stable optical cavity closely match the predictions of the usual Schawlow-Townes theory, while the frequency fluctuations in a nearly identical laser employing an unstable optical resonator are approximately 1,300 times larger. These much larger fluctuations arise in part from the larger output coupling and cavity bandwidth of the unstable cavity, but they also appear to confirm a predicted excess spontaneous emission factor (Petermann excess noise factor) of [approx]180 times arising from the nonorthogonal transverse mode properties of the unstable cavity.« less

Beam shape coefficients calculation for an elliptical Gaussian beam with 1-dimensional quadrature and localized approximation methods

NASA Astrophysics Data System (ADS)

Wang, Wei; Shen, Jianqi

2018-06-01

The use of a shaped beam for applications relying on light scattering depends much on the ability to evaluate the beam shape coefficients (BSC) effectively. Numerical techniques for evaluating the BSCs of a shaped beam, such as the quadrature, the localized approximation (LA), the integral localized approximation (ILA) methods, have been developed within the framework of generalized Lorenz-Mie theory (GLMT). The quadrature methods usually employ the 2-/3-dimensional integrations. In this work, the expressions of the BSCs for an elliptical Gaussian beam (EGB) are simplified into the 1-dimensional integral so as to speed up the numerical computation. Numerical results of BSCs are used to reconstruct the beam field and the fidelity of the reconstructed field to the given beam field is estimated. It is demonstrated that the proposed method is much faster than the 2-dimensional integrations and it can acquire more accurate results than the LA method. Limitations of the quadrature method and also the LA method in the numerical calculation are analyzed in detail.

A vibration correction method for free-fall absolute gravimeters

NASA Astrophysics Data System (ADS)

Qian, J.; Wang, G.; Wu, K.; Wang, L. J.

2018-02-01

An accurate determination of gravitational acceleration, usually approximated as 9.8 m s-2, has been playing an important role in the areas of metrology, geophysics, and geodetics. Absolute gravimetry has been experiencing rapid developments in recent years. Most absolute gravimeters today employ a free-fall method to measure gravitational acceleration. Noise from ground vibration has become one of the most serious factors limiting measurement precision. Compared to vibration isolators, the vibration correction method is a simple and feasible way to reduce the influence of ground vibrations. A modified vibration correction method is proposed and demonstrated. A two-dimensional golden section search algorithm is used to search for the best parameters of the hypothetical transfer function. Experiments using a T-1 absolute gravimeter are performed. It is verified that for an identical group of drop data, the modified method proposed in this paper can achieve better correction effects with much less computation than previous methods. Compared to vibration isolators, the correction method applies to more hostile environments and even dynamic platforms, and is expected to be used in a wider range of applications.

Biases in measuring the brain: the trouble with the telencephalon.

PubMed

LaDage, Lara D; Roth, Timothy C; Pravosudov, Vladimir V

2009-01-01

When correlating behavior with particular brain regions thought responsible for the behavior, a different region of the brain is usually measured as a control region. This technique is often used to relate spatial processes with the hippocampus, while concomitantly controlling for overall brain changes by measuring the remainder of the telencephalon. We have identified two methods in the literature (the HOM and TTM) that estimate the volume of the telencephalon, although the majority of studies are ambiguous regarding the method employed in measuring the telencephalon. Of these two methods, the HOM might produce an artificial correlation between the telencephalon and the hippocampus, and this bias could result in a significant overestimation of the relative hippocampal volume and a significant underestimation of the telencephalon volume, both of which are regularly used in large comparative analyses. We suggest that future studies should avoid this method and all studies should explicitly delineate the procedures used when estimating brain volumes. Copyright 2009 S. Karger AG, Basel.

An Automatic Segmentation and Classification Framework Based on PCNN Model for Single Tooth in MicroCT Images.

PubMed

Wang, Liansheng; Li, Shusheng; Chen, Rongzhen; Liu, Sze-Yu; Chen, Jyh-Cheng

2016-01-01

Accurate segmentation and classification of different anatomical structures of teeth from medical images plays an essential role in many clinical applications. Usually, the anatomical structures of teeth are manually labelled by experienced clinical doctors, which is time consuming. However, automatic segmentation and classification is a challenging task because the anatomical structures and surroundings of the tooth in medical images are rather complex. Therefore, in this paper, we propose an effective framework which is designed to segment the tooth with a Selective Binary and Gaussian Filtering Regularized Level Set (GFRLS) method improved by fully utilizing three dimensional (3D) information, and classify the tooth by employing unsupervised learning Pulse Coupled Neural Networks (PCNN) model. In order to evaluate the proposed method, the experiments are conducted on the different datasets of mandibular molars and the experimental results show that our method can achieve better accuracy and robustness compared to other four state of the art clustering methods.

Robust Statistical Approaches for RSS-Based Floor Detection in Indoor Localization.

PubMed

Razavi, Alireza; Valkama, Mikko; Lohan, Elena Simona

2016-05-31

Floor detection for indoor 3D localization of mobile devices is currently an important challenge in the wireless world. Many approaches currently exist, but usually the robustness of such approaches is not addressed or investigated. The goal of this paper is to show how to robustify the floor estimation when probabilistic approaches with a low number of parameters are employed. Indeed, such an approach would allow a building-independent estimation and a lower computing power at the mobile side. Four robustified algorithms are to be presented: a robust weighted centroid localization method, a robust linear trilateration method, a robust nonlinear trilateration method, and a robust deconvolution method. The proposed approaches use the received signal strengths (RSS) measured by the Mobile Station (MS) from various heard WiFi access points (APs) and provide an estimate of the vertical position of the MS, which can be used for floor detection. We will show that robustification can indeed increase the performance of the RSS-based floor detection algorithms.

A single-image method for x-ray refractive index CT.

PubMed

Mittone, A; Gasilov, S; Brun, E; Bravin, A; Coan, P

2015-05-07

X-ray refraction-based computer tomography imaging is a well-established method for nondestructive investigations of various objects. In order to perform the 3D reconstruction of the index of refraction, two or more raw computed tomography phase-contrast images are usually acquired and combined to retrieve the refraction map (i.e. differential phase) signal within the sample. We suggest an approximate method to extract the refraction signal, which uses a single raw phase-contrast image. This method, here applied to analyzer-based phase-contrast imaging, is employed to retrieve the index of refraction map of a biological sample. The achieved accuracy in distinguishing the different tissues is comparable with the non-approximated approach. The suggested procedure can be used for precise refraction computer tomography with the advantage of a reduction of at least a factor of two of both the acquisition time and the dose delivered to the sample with respect to any of the other algorithms in the literature.

Missing-value estimation using linear and non-linear regression with Bayesian gene selection.

PubMed

Zhou, Xiaobo; Wang, Xiaodong; Dougherty, Edward R

2003-11-22

Data from microarray experiments are usually in the form of large matrices of expression levels of genes under different experimental conditions. Owing to various reasons, there are frequently missing values. Estimating these missing values is important because they affect downstream analysis, such as clustering, classification and network design. Several methods of missing-value estimation are in use. The problem has two parts: (1) selection of genes for estimation and (2) design of an estimation rule. We propose Bayesian variable selection to obtain genes to be used for estimation, and employ both linear and nonlinear regression for the estimation rule itself. Fast implementation issues for these methods are discussed, including the use of QR decomposition for parameter estimation. The proposed methods are tested on data sets arising from hereditary breast cancer and small round blue-cell tumors. The results compare very favorably with currently used methods based on the normalized root-mean-square error. The appendix is available from http://gspsnap.tamu.edu/gspweb/zxb/missing_zxb/ (user: gspweb; passwd: gsplab).

Thickness measurement by two-sided step-heating thermal imaging

NASA Astrophysics Data System (ADS)

Li, Xiaoli; Tao, Ning; Sun, J. G.; Zhang, Cunlin; Zhao, Yuejin

2018-01-01

Infrared thermal imaging is a promising nondestructive technique for thickness prediction. However, it is usually thought to be only appropriate for testing the thickness of thin objects or near-surface structures. In this study, we present a new two-sided step-heating thermal imaging method which employed a low-cost portable halogen lamp as the heating source and verified it with two stainless steel step wedges with thicknesses ranging from 5 mm to 24 mm. We first derived the one-dimensional step-heating thermography theory with the consideration of warm-up time of the lamp, and then applied the nonlinear regression method to fit the experimental data by the derived function to determine the thickness. After evaluating the reliability and accuracy of the experimental results, we concluded that this method is capable of testing thick objects. In addition, we provided the criterions for both the required data length and the applicable thickness range of the testing material. It is evident that this method will broaden the thermal imaging application for thickness measurement.

A combined finite element-boundary integral formulation for solution of two-dimensional scattering problems via CGFFT. [Conjugate Gradient Fast Fourier Transformation

NASA Technical Reports Server (NTRS)

Collins, Jeffery D.; Volakis, John L.; Jin, Jian-Ming

1990-01-01

A new technique is presented for computing the scattering by 2-D structures of arbitrary composition. The proposed solution approach combines the usual finite element method with the boundary-integral equation to formulate a discrete system. This is subsequently solved via the conjugate gradient (CG) algorithm. A particular characteristic of the method is the use of rectangular boundaries to enclose the scatterer. Several of the resulting boundary integrals are therefore convolutions and may be evaluated via the fast Fourier transform (FFT) in the implementation of the CG algorithm. The solution approach offers the principal advantage of having O(N) memory demand and employs a 1-D FFT versus a 2-D FFT as required with a traditional implementation of the CGFFT algorithm. The speed of the proposed solution method is compared with that of the traditional CGFFT algorithm, and results for rectangular bodies are given and shown to be in excellent agreement with the moment method.

A combined finite element and boundary integral formulation for solution via CGFFT of 2-dimensional scattering problems

NASA Technical Reports Server (NTRS)

Collins, Jeffery D.; Volakis, John L.

1989-01-01

A new technique is presented for computing the scattering by 2-D structures of arbitrary composition. The proposed solution approach combines the usual finite element method with the boundary integral equation to formulate a discrete system. This is subsequently solved via the conjugate gradient (CG) algorithm. A particular characteristic of the method is the use of rectangular boundaries to enclose the scatterer. Several of the resulting boundary integrals are therefore convolutions and may be evaluated via the fast Fourier transform (FFT) in the implementation of the CG algorithm. The solution approach offers the principle advantage of having O(N) memory demand and employs a 1-D FFT versus a 2-D FFT as required with a traditional implementation of the CGFFT algorithm. The speed of the proposed solution method is compared with that of the traditional CGFFT algorithm, and results for rectangular bodies are given and shown to be in excellent agreement with the moment method.

Axial dispersion of non-Newtonian fluids in porous media

DOE Office of Scientific and Technical Information (OSTI.GOV)

Payne, L.W.; Parker, H.W.

1973-01-01

Mixing of liquids in the direction parallel to flow through porous media, usually termed axial dispersion, is a significant factor in regard to chromatography columns, packed bed reactors, and miscible displacement methods for the recovery of petroleum. For this reason, axial dispersion rates have frequently been investigated, but practically investigations have employed low viscosity Newtonian fluid such as water and light hydrocarbons. In this research, pseudoplastic fluids having a power law exponent as low as 0.6 were employed at very low flow rates to facilitate the observation of non-Newtonian effects on axial dispersion rates. The flow system used in thismore » investigation was a vertically oriented glass bead pack. Glass beads of 470 mu nominal size were packed into the flow cell while vibrating the cell. The studies were conducted by displacing an undyed solution from the bead pack with a dyed solution at a constant rate aor visa versa. Vertical, downward flow was used in all displacements. (10 refs.)« less

All-Cause and Cause-Specific Mortality by Socioeconomic Status Among Employed Persons in 27 US States, 1984–1997

PubMed Central

Steenland, Kyle; Hu, Sherry; Walker, James

2004-01-01

Objectives. We investigated mortality differences according to socioeconomic status (SES) for employed persons in 27 states during 1984–1997. Methods. SES was determined for persons aged 35–64 years according to the “usual occupation” listed on their death certificates. We used US Census denominator data. Results. For all-cause mortality, rate ratios from lowest to highest SES quartile for men and women were 2.02, 1.69, 1.25, and 1.00 and 1.29, 1.01, 1.07, and 1.00, respectively. Percentage of all deaths attributable to being in the lowest 3 SES quartiles was 27%. Inverse SES gradients were strong for most major causes of death except breast cancer and colorectal cancer. Heart disease mortality for highest and lowest SES quartiles dropped 45% and 25%, respectively, between 1984 and 1997. Conclusions. Mortality differences by SES were sustained through the 1990s and are increasing for men. PMID:15249312

[Airway humidification practices in Chilean intensive care units].

PubMed

Retamal, Jaime; Castillo, Juan; Bugedo, Guillermo; Bruhn, Alejandro

2012-11-01

In patients with an artificial airway, inspired gases can be humidified and heated using a passive (heat and moisture exchange filter - HMEF), or an active system (heated humidifier). To assess how humidification is carried out and what is the usual clinical practice in this field in Chilean intensive care units (ICUs). A specific survey to evaluate humidification system features as well as caregivers' preferences regarding humidification systems, was carried out on the same day in all Chilean ICUs. Fifty-five ICUs were contacted and 44 of them completed the survey. From a total of 367 patients, 254 (69%) required humidification because they were breathing through an artificial airway. A heated humidifier was employed only in 12 patients (5%). Forty-three ICUs (98%) used HMEF as their routine humidification system. In 52% of surveyed ICUs, heated humidifiers were not available. In Chile the main method to humidify and heat inspired gases in patients with an artificial airway is the HMEF. Although there are clear indications for the use of heated humidifiers, they are seldom employed.

Solving an inverse eigenvalue problem with triple constraints on eigenvalues, singular values, and diagonal elements

NASA Astrophysics Data System (ADS)

Wu, Sheng-Jhih; Chu, Moody T.

2017-08-01

An inverse eigenvalue problem usually entails two constraints, one conditioned upon the spectrum and the other on the structure. This paper investigates the problem where triple constraints of eigenvalues, singular values, and diagonal entries are imposed simultaneously. An approach combining an eclectic mix of skills from differential geometry, optimization theory, and analytic gradient flow is employed to prove the solvability of such a problem. The result generalizes the classical Mirsky, Sing-Thompson, and Weyl-Horn theorems concerning the respective majorization relationships between any two of the arrays of main diagonal entries, eigenvalues, and singular values. The existence theory fills a gap in the classical matrix theory. The problem might find applications in wireless communication and quantum information science. The technique employed can be implemented as a first-step numerical method for constructing the matrix. With slight modification, the approach might be used to explore similar types of inverse problems where the prescribed entries are at general locations.

Disability retirement

NASA Technical Reports Server (NTRS)

Eck, R. L.

1975-01-01

Eligibility for disability retirement is discussed. General guidelines and a few standards are given. Usually the same basic medical principles apply to the evaluation of claims for disability retirement as apply to determining medical suitability for initial employment.

Robust pre-specified time synchronization of chaotic systems by employing time-varying switching surfaces in the sliding mode control scheme

NASA Astrophysics Data System (ADS)

Khanzadeh, Alireza; Pourgholi, Mahdi

2016-08-01

In the conventional chaos synchronization methods, the time at which two chaotic systems are synchronized, is usually unknown and depends on initial conditions. In this work based on Lyapunov stability theory a sliding mode controller with time-varying switching surfaces is proposed to achieve chaos synchronization at a pre-specified time for the first time. The proposed controller is able to synchronize chaotic systems precisely at any time when we want. Moreover, by choosing the time-varying switching surfaces in a way that the reaching phase is eliminated, the synchronization becomes robust to uncertainties and exogenous disturbances. Simulation results are presented to show the effectiveness of the proposed method of stabilizing and synchronizing chaotic systems with complete robustness to uncertainty and disturbances exactly at a pre-specified time.

The Foraging Ecology of Royal and Sandwich Terns in North Carolina, USA

USGS Publications Warehouse

McGinnis, T.W.; Emslie, S.D.

2001-01-01

Population sizes of territorial male red-winged blackbirds (Agelaius phoeniceus) were determined with counts of territorial males (area count) and a Petersen-Lincoln Index method for roadsides (roadside estimate). Weather conditions and time of day did not influence either method. Combined roadside estimates had smaller error bounds than the individual transect estimates and were not hindered by the problem of zero recaptures. Roadside estimates were usually one-half as large as the area counts, presumably due to an observer bias for marked birds. The roadside estimate provides only an index of major changes in populations of territorial male redwings. When the roadside estimate is employed, the area count should be used to determine the amount and nature of observer bias. For small population surveys, the area count is probably more reliable and accurate than the roadside estimate.

Determining population size of territorial red-winged blackbirds

USGS Publications Warehouse

Albers, P.H.

1976-01-01

Population sizes of territorial male red-winged blackbirds (Agelaius phoeniceus) were determined with counts of territorial males (area count) and a Petersen-Lincoln Index method for roadsides (roadside estimate). Weather conditions and time of day did not influence either method. Combined roadside estimates had smaller error bounds than the individual transect estimates and were not hindered by the problem of zero recaptures. Roadside estimates were usually one-half as large as the area counts, presumably due to an observer bias for marked birds. The roadside estimate provides only an index of major changes in populations of territorial male redwings. When the roadside estimate is employed, the area count should be used to determine the amount and nature of observer bias. For small population surveys, the area count is probably more reliable and accurate than the roadside estimate.

Sieve-based device for MALDI sample preparation. I. Influence of sample deposition conditions in oligonucleotide analysis to achieve significant increases in both sensitivity and resolution.

PubMed

Molin, Laura; Cristoni, Simone; Crotti, Sara; Bernardi, Luigi Rossi; Seraglia, Roberta; Traldi, Pietro

2008-11-01

Spraying of oligonucleotide-matrix solutions through a stainless steel (ss) sieve (38 microm, 450 mesh) leads to the formation, on the matrix-assisted laser desorption/ionization (MALDI) sample holder, of uniformly distributed microcrystals, well separated from each other. When the resulting sample holder surface is irradiated by laser, abundant molecular species form, with a clear increase in both intensity and resolution with respect to values obtained by 'Dried Droplet', 'Double Layer', and 'Sandwich' deposition methods. In addition, unlike the usual situation, the sample is perfectly homogeneous, and identical spectra are obtained by irradiating different areas. On one hand, the data indicate that this method is highly effective for oligonucleotide MALDI analysis, and on the other, that it can be validly employed for fully automated MALDI procedures.

Chain of care for patients who have attempted suicide: a follow-up study from Bærum, Norway

PubMed Central

2011-01-01

Background Individuals who have attempted suicide are at increased risk of subsequent suicidal behavior. Since 1983, a community-based suicide prevention team has been operating in the municipality of Bærum, Norway. This study aimed to test the effectiveness of the team's interventions in preventing repeated suicide attempts and suicide deaths, as part of a chain of care model for all general hospital treated suicide attempters. Methods Data has been collected consecutively since 1984 and a follow-up was conducted on all individuals admitted to the general hospital after a suicide attempt. The risk of repeated suicide attempt and suicide were comparatively examined in subjects who received assistance from the suicide prevention team in addition to treatment as usual versus those who received treatment as usual only. Logistic regression and Cox regression were used to analyze the data. Results Between January 1984 and December 2007, 1,616 subjects were registered as having attempted suicide; 197 of them (12%) made another attempt within 12 months. Compared to subjects who did not receive assistance from the suicide prevention team, individuals involved in the prevention program did not have a significantly different risk of repeated attempt within 6 months (adjusted OR = 1.08; 95% CI = 0.66-1.74), 12 months (adjusted OR = 0.86; 95% CI = 0.57-1.30), or 5 years (adjusted RR = 0.90; 95% CI = 0.67-1.22) after their first recorded attempt. There was also no difference in risk of suicide (adjusted RR = 0.85; 95% CI = 0.46-1.57). Previous suicide attempts, marital status, and employment status were significantly associated with a repeated suicide attempt within 6 and 12 months (p < 0.05). Alcohol misuse, employment status, and previous suicide attempts were significantly associated with a repeated attempt within 5 years (p < 0.05) while marital status became non-significant (p > 0.05). With each year of age, the risk of suicide increased by 3% (p < 0.05). Conclusions The present study did not find any differences in the risk of fatal and non-fatal suicidal behavior between subjects who received treatment as usual combined with community assistance versus subjects who received only treatment as usual. However, assistance from the community team was mainly offered to attempters who were not receiving sufficient support from treatment as usual and was accepted by 50-60% of those deemed eligible. Thus, obtaining similar outcomes for individuals, all of whom were clinically judged to have different needs, could in itself be considered a desirable result. PMID:21294876

Multi-Atlas Based Segmentation of Brainstem Nuclei from MR Images by Deep Hyper-Graph Learning.

PubMed

Dong, Pei; Guo, Yangrong; Gao, Yue; Liang, Peipeng; Shi, Yonghong; Wang, Qian; Shen, Dinggang; Wu, Guorong

2016-10-01

Accurate segmentation of brainstem nuclei (red nucleus and substantia nigra) is very important in various neuroimaging applications such as deep brain stimulation and the investigation of imaging biomarkers for Parkinson's disease (PD). Due to iron deposition during aging, image contrast in the brainstem is very low in Magnetic Resonance (MR) images. Hence, the ambiguity of patch-wise similarity makes the recently successful multi-atlas patch-based label fusion methods have difficulty to perform as competitive as segmenting cortical and sub-cortical regions from MR images. To address this challenge, we propose a novel multi-atlas brainstem nuclei segmentation method using deep hyper-graph learning. Specifically, we achieve this goal in three-fold. First , we employ hyper-graph to combine the advantage of maintaining spatial coherence from graph-based segmentation approaches and the benefit of harnessing population priors from multi-atlas based framework. Second , besides using low-level image appearance, we also extract high-level context features to measure the complex patch-wise relationship. Since the context features are calculated on a tentatively estimated label probability map, we eventually turn our hyper-graph learning based label propagation into a deep and self-refining model. Third , since anatomical labels on some voxels (usually located in uniform regions) can be identified much more reliably than other voxels (usually located at the boundary between two regions), we allow these reliable voxels to propagate their labels to the nearby difficult-to-label voxels. Such hierarchical strategy makes our proposed label fusion method deep and dynamic. We evaluate our proposed label fusion method in segmenting substantia nigra (SN) and red nucleus (RN) from 3.0 T MR images, where our proposed method achieves significant improvement over the state-of-the-art label fusion methods.

Power lifting: people meeting the population challenge.

PubMed

Dillon, L

1994-12-01

Whereas population pressures are usually associated with developing countries, developed countries like the US also suffer from population-associated problems. For example, in some US cities the infant mortality rate is worse than in the developing world. US policy-makers have found it useful to apply some of the programs used successfully in the developing world to problems at home. Efforts to increase the availability of health care services and education have led to the creation of the Healthy Start program in Baltimore, Maryland, which uses community residents to motivate their peers and provides counseling on family planning, education, and employment. In Oregon, an AIDS-prevention program, which makes condoms more accessible to teenagers, has been transplanted from Zaire. Chattanooga, Tennessee, has used techniques from Brazil to design public transportation systems and improve air quality. In communities across the country, activists are working to instill power in local residents as they seek ways to improve the environment and promote economic health. Modeled on an initiative in Bangladesh, community-run loan programs allow the development of microenterprises which help people develop self-employment opportunities. When women take part in these activities and become successfully employed, their children are given what is usually their first example of parental employment and a reason to hope for a better future.

Adapting smartphones for low-cost optical medical imaging

NASA Astrophysics Data System (ADS)

Pratavieira, Sebastião.; Vollet-Filho, José D.; Carbinatto, Fernanda M.; Blanco, Kate; Inada, Natalia M.; Bagnato, Vanderlei S.; Kurachi, Cristina

2015-06-01

Optical images have been used in several medical situations to improve diagnosis of lesions or to monitor treatments. However, most systems employ expensive scientific (CCD or CMOS) cameras and need computers to display and save the images, usually resulting in a high final cost for the system. Additionally, this sort of apparatus operation usually becomes more complex, requiring more and more specialized technical knowledge from the operator. Currently, the number of people using smartphone-like devices with built-in high quality cameras is increasing, which might allow using such devices as an efficient, lower cost, portable imaging system for medical applications. Thus, we aim to develop methods of adaptation of those devices to optical medical imaging techniques, such as fluorescence. Particularly, smartphones covers were adapted to connect a smartphone-like device to widefield fluorescence imaging systems. These systems were used to detect lesions in different tissues, such as cervix and mouth/throat mucosa, and to monitor ALA-induced protoporphyrin-IX formation for photodynamic treatment of Cervical Intraepithelial Neoplasia. This approach may contribute significantly to low-cost, portable and simple clinical optical imaging collection.

Electromagnetic properties of proximity systems

NASA Astrophysics Data System (ADS)

Kresin, Vladimir Z.

1985-07-01

Magnetic screening in the proximity system Sα-Mβ, where Mβ is a normal metal N, semiconductor (semimetal), or a superconductor, is studied. Main attention is paid to the low-temperature region where nonlocality plays an important role. The thermodynamic Green's-function method is employed in order to describe the behavior of the proximity system in an external field. The temperature and thickness dependences of the penetration depth λ are obtained. The dependence λ(T) differs in a striking way from the dependence in usual superconductors. The strong-coupling effect is taken into account. A special case of screening in a superconducting film backed by a size-quantizing semimetal film is considered. The results obtained are in good agreement with experimental data.

Tetrodotoxin: Chemistry, Toxicity, Source, Distribution and Detection

PubMed Central

Bane, Vaishali; Lehane, Mary; Dikshit, Madhurima; O’Riordan, Alan; Furey, Ambrose

2014-01-01

Tetrodotoxin (TTX) is a naturally occurring toxin that has been responsible for human intoxications and fatalities. Its usual route of toxicity is via the ingestion of contaminated puffer fish which are a culinary delicacy, especially in Japan. TTX was believed to be confined to regions of South East Asia, but recent studies have demonstrated that the toxin has spread to regions in the Pacific and the Mediterranean. There is no known antidote to TTX which is a powerful sodium channel inhibitor. This review aims to collect pertinent information available to date on TTX and its analogues with a special emphasis on the structure, aetiology, distribution, effects and the analytical methods employed for its detection. PMID:24566728

Temperature correction in conductivity measurements

USGS Publications Warehouse

Smith, Stanford H.

1962-01-01

Electrical conductivity has been widely used in freshwater research but usual methods employed by limnologists for converting measurements to conductance at a given temperature have not given uniformly accurate results. The temperature coefficient used to adjust conductivity of natural waters to a given temperature varies depending on the kinds and concentrations of electrolytes, the temperature at the time of measurement, and the temperature to which measurements are being adjusted. The temperature coefficient was found to differ for various lake and stream waters, and showed seasonal changes. High precision can be obtained only by determining temperature coefficients for each water studied. Mean temperature coefficients are given for various temperature ranges that may be used where less precision is required.

Cosimulation of embedded system using RTOS software simulator

NASA Astrophysics Data System (ADS)

Wang, Shihao; Duan, Zhigang; Liu, Mingye

2003-09-01

Embedded system design often employs co-simulation to verify system's function; one efficient verification tool of software is Instruction Set Simulator (ISS). As a full functional model of target CPU, ISS interprets instruction of embedded software step by step, which usually is time-consuming since it simulates at low-level. Hence ISS often becomes the bottleneck of co-simulation in a complicated system. In this paper, a new software verification tools, the RTOS software simulator (RSS) was presented. The mechanism of its operation was described in a full details. In RSS method, RTOS API is extended and hardware simulator driver is adopted to deal with data-exchange and synchronism between the two simulators.

A new method of passive modifications for partial frequency assignment of general structures

NASA Astrophysics Data System (ADS)

Belotti, Roberto; Ouyang, Huajiang; Richiedei, Dario

2018-01-01

The assignment of a subset of natural frequencies to vibrating systems can be conveniently achieved by means of suitable structural modifications. It has been observed that such an approach usually leads to the undesired change of the unassigned natural frequencies, which is a phenomenon known as frequency spill-over. Such an issue has been dealt with in the literature only in simple specific cases. In this paper, a new and general method is proposed that aims to assign a subset of natural frequencies with low spill-over. The optimal structural modifications are determined through a three-step procedure that considers both the prescribed eigenvalues and the feasibility constraints, assuring that the obtained solution is physically realizable. The proposed method is therefore applicable to very general vibrating systems, such as those obtained through the finite element method. The numerical difficulties that may occur as a result of employing the method are also carefully addressed. Finally, the capabilities of the method are validated in three test-cases in which both lumped and distributed parameters are modified to obtain the desired eigenvalues.

Multi-Frequency Signal Detection Based on Frequency Exchange and Re-Scaling Stochastic Resonance and Its Application to Weak Fault Diagnosis.

PubMed

Liu, Jinjun; Leng, Yonggang; Lai, Zhihui; Fan, Shengbo

2018-04-25

Mechanical fault diagnosis usually requires not only identification of the fault characteristic frequency, but also detection of its second and/or higher harmonics. However, it is difficult to detect a multi-frequency fault signal through the existing Stochastic Resonance (SR) methods, because the characteristic frequency of the fault signal as well as its second and higher harmonics frequencies tend to be large parameters. To solve the problem, this paper proposes a multi-frequency signal detection method based on Frequency Exchange and Re-scaling Stochastic Resonance (FERSR). In the method, frequency exchange is implemented using filtering technique and Single SideBand (SSB) modulation. This new method can overcome the limitation of "sampling ratio" which is the ratio of the sampling frequency to the frequency of target signal. It also ensures that the multi-frequency target signals can be processed to meet the small-parameter conditions. Simulation results demonstrate that the method shows good performance for detecting a multi-frequency signal with low sampling ratio. Two practical cases are employed to further validate the effectiveness and applicability of this method.

Concordance between current job and usual job in occupational and industry groupings: assessment of the 2010 national health interview survey.

PubMed

Luckhaupt, Sara E; Cohen, Martha A; Calvert, Geoffrey M

2013-09-01

To determine whether current job is a reasonable surrogate for usual job. Data from the 2010 National Health Interview Survey were utilized to determine concordance between current and usual jobs for workers employed within the past year. Concordance was quantitated by kappa values for both simple and detailed industry and occupational groups. Good agreement is considered to be present when kappa values exceed 60. Overall kappa values ± standard errors were 74.5 ± 0.5 for simple industry, 72.4 ± 0.5 for detailed industry, 76.3 ± 0.4 for simple occupation, 73.7 ± 0.5 for detailed occupation, and 80.4 ± 0.6 for very broad occupational class. Sixty-five of 73 detailed industry groups and 78 of 81 detailed occupation groups evaluated had good agreement between current and usual jobs. Current job can often serve as a reliable surrogate for usual job in epidemiologic studies.

Determinants of consumption-day amounts applicable for the estimation of usual dietary intake with a short 24-h food list.

PubMed

Freese, Johanna; Pricop-Jeckstadt, Mihaela; Heuer, Thorsten; Clemens, Matthias; Boeing, Heiner; Knüppel, Sven; Nöthlings, Ute

2016-01-01

Next to the information on frequency of food consumption, information on consumption-day amounts is important to estimate usual dietary intake in epidemiological studies. Our objective was to identify determinants of consumption-day amounts to derive person-specific standard consumption-day amounts applicable for the estimation of usual dietary intake using separate sources to assesss information on consumption probability and amount consumed. 24-h Dietary recall data from the German National Nutrition Survey II ( n  = 8522; aged 20-80 years) conducted between 2005 and 2007 were analysed for determinants of consumption-day amounts of thirty-eight food and beverage groups using LASSO variable selection for linear mixed-effects models. Determinants included sex, age, BMI, smoking status, years of education, household net income, living status and employment status. Most often, sex, age and smoking status were selected as predictors for consumption-day amounts across thirty-eight food groups. In contrast, living with a partner, employment status and household net income were less frequently chosen. Overall, different determinants were of relevance for different food groups. The number of selected determinants ranged from eight for coffee and juice to zero for cabbage, tea, root vegetables, leafy vegetables, fruit vegetables, legumes, offal, vegetable oils, and other fats. For the estimation of usual dietary intake in a combined approach with a 24-h food list, person-specific standard consumption-day amounts could be used. Sex, age and smoking status were shown to be the most relevant predictors in our analysis. Their impact on the estimation of usual dietary intake needs to be evaluated in future studies.

An improved swarm optimization for parameter estimation and biological model selection.

PubMed

Abdullah, Afnizanfaizal; Deris, Safaai; Mohamad, Mohd Saberi; Anwar, Sohail

2013-01-01

One of the key aspects of computational systems biology is the investigation on the dynamic biological processes within cells. Computational models are often required to elucidate the mechanisms and principles driving the processes because of the nonlinearity and complexity. The models usually incorporate a set of parameters that signify the physical properties of the actual biological systems. In most cases, these parameters are estimated by fitting the model outputs with the corresponding experimental data. However, this is a challenging task because the available experimental data are frequently noisy and incomplete. In this paper, a new hybrid optimization method is proposed to estimate these parameters from the noisy and incomplete experimental data. The proposed method, called Swarm-based Chemical Reaction Optimization, integrates the evolutionary searching strategy employed by the Chemical Reaction Optimization, into the neighbouring searching strategy of the Firefly Algorithm method. The effectiveness of the method was evaluated using a simulated nonlinear model and two biological models: synthetic transcriptional oscillators, and extracellular protease production models. The results showed that the accuracy and computational speed of the proposed method were better than the existing Differential Evolution, Firefly Algorithm and Chemical Reaction Optimization methods. The reliability of the estimated parameters was statistically validated, which suggests that the model outputs produced by these parameters were valid even when noisy and incomplete experimental data were used. Additionally, Akaike Information Criterion was employed to evaluate the model selection, which highlighted the capability of the proposed method in choosing a plausible model based on the experimental data. In conclusion, this paper presents the effectiveness of the proposed method for parameter estimation and model selection problems using noisy and incomplete experimental data. This study is hoped to provide a new insight in developing more accurate and reliable biological models based on limited and low quality experimental data.

Evaluating Employment Environments.

ERIC Educational Resources Information Center

Opsata, Margaret

1985-01-01

Companies usually offer jobs to qualified candidates best suited for their internal environments. In order to find the "best" job, candidates should compare these environments (examining tradition, dress, neighborhoods, time policies, and behavioral rules). Definitions of internal environment, variations, compatibility responsibility, researching…

29 CFR 516.6 - Records to be preserved 2 years.

Code of Federal Regulations, 2010 CFR

2010-07-01

... time and earning cards or sheets on which are entered the daily starting and stopping time of... like) which the employer retains or makes in the usual course of business operations. (c) Records of...

A new method for estimating the usual intake of episodically-consumed foods with application to their distribution

PubMed Central

Midthune, Douglas; Dodd, Kevin W.; Freedman, Laurence S.; Krebs-Smith, Susan M.; Subar, Amy F.; Guenther, Patricia M.; Carroll, Raymond J.; Kipnis, Victor

2007-01-01

Objective We propose a new statistical method that uses information from two 24-hour recalls (24HRs) to estimate usual intake of episodically-consumed foods. Statistical Analyses Performed The method developed at the National Cancer Institute (NCI) accommodates the large number of non-consumption days that arise with foods by separating the probability of consumption from the consumption-day amount, using a two-part model. Covariates, such as sex, age, race, or information from a food frequency questionnaire (FFQ), may supplement the information from two or more 24HRs using correlated mixed model regression. The model allows for correlation between the probability of consuming a food on a single day and the consumption-day amount. Percentiles of the distribution of usual intake are computed from the estimated model parameters. Results The Eating at America's Table Study (EATS) data are used to illustrate the method to estimate the distribution of usual intake for whole grains and dark green vegetables for men and women and the distribution of usual intakes of whole grains by educational level among men. A simulation study indicates that the NCI method leads to substantial improvement over existing methods for estimating the distribution of usual intake of foods. Applications/Conclusions The NCI method provides distinct advantages over previously proposed methods by accounting for the correlation between probability of consumption and amount consumed and by incorporating covariate information. Researchers interested in estimating the distribution of usual intakes of foods for a population or subpopulation are advised to work with a statistician and incorporate the NCI method in analyses. PMID:17000190

Scope of Gradient and Genetic Algorithms in Multivariable Function Optimization

NASA Technical Reports Server (NTRS)

Shaykhian, Gholam Ali; Sen, S. K.

2007-01-01

Global optimization of a multivariable function - constrained by bounds specified on each variable and also unconstrained - is an important problem with several real world applications. Deterministic methods such as the gradient algorithms as well as the randomized methods such as the genetic algorithms may be employed to solve these problems. In fact, there are optimization problems where a genetic algorithm/an evolutionary approach is preferable at least from the quality (accuracy) of the results point of view. From cost (complexity) point of view, both gradient and genetic approaches are usually polynomial-time; there are no serious differences in this regard, i.e., the computational complexity point of view. However, for certain types of problems, such as those with unacceptably erroneous numerical partial derivatives and those with physically amplified analytical partial derivatives whose numerical evaluation involves undesirable errors and/or is messy, a genetic (stochastic) approach should be a better choice. We have presented here the pros and cons of both the approaches so that the concerned reader/user can decide which approach is most suited for the problem at hand. Also for the function which is known in a tabular form, instead of an analytical form, as is often the case in an experimental environment, we attempt to provide an insight into the approaches focusing our attention toward accuracy. Such an insight will help one to decide which method, out of several available methods, should be employed to obtain the best (least error) output. *

A step-by-step protocol for assaying protein carbonylation in biological samples.

PubMed

Colombo, Graziano; Clerici, Marco; Garavaglia, Maria Elisa; Giustarini, Daniela; Rossi, Ranieri; Milzani, Aldo; Dalle-Donne, Isabella

2016-04-15

Protein carbonylation represents the most frequent and usually irreversible oxidative modification affecting proteins. This modification is chemically stable and this feature is particularly important for storage and detection of carbonylated proteins. Many biochemical and analytical methods have been developed during the last thirty years to assay protein carbonylation. The most successful method consists on protein carbonyl (PCO) derivatization with 2,4-dinitrophenylhydrazine (DNPH) and consequent spectrophotometric assay. This assay allows a global quantification of PCO content due to the ability of DNPH to react with carbonyl giving rise to an adduct able to absorb at 366 nm. Similar approaches were also developed employing chromatographic separation, in particular HPLC, and parallel detection of absorbing adducts. Subsequently, immunological techniques, such as Western immunoblot or ELISA, have been developed leading to an increase of sensitivity in protein carbonylation detection. Currently, they are widely employed to evaluate change in total protein carbonylation and eventually to highlight the specific proteins undergoing selective oxidation. In the last decade, many mass spectrometry (MS) approaches have been developed for the identification of the carbonylated proteins and the relative amino acid residues modified to carbonyl derivatives. Although these MS methods are much more focused and detailed due to their ability to identify the amino acid residues undergoing carbonylation, they still require too expensive equipments and, therefore, are limited in distribution. In this protocol paper, we summarise and comment on the most diffuse protocols that a standard laboratory can employ to assess protein carbonylation; in particular, we describe step-by-step the different protocols, adding suggestions coming from our on-bench experience. Copyright © 2015 Elsevier B.V. All rights reserved.

Progress and development of analytical methods for gibberellins.

PubMed

Pan, Chaozhi; Tan, Swee Ngin; Yong, Jean Wan Hong; Ge, Liya

2017-01-01

Gibberellins, as a group of phytohormones, exhibit a wide variety of bio-functions within plant growth and development, which have been used to increase crop yields. Many analytical procedures, therefore, have been developed for the determination of the types and levels of endogenous and exogenous gibberellins. As plant tissues contain gibberellins in trace amounts (usually at the level of nanogram per gram fresh weight or even lower), the sample pre-treatment steps (extraction, pre-concentration, and purification) for gibberellins are reviewed in details. The primary focus of this comprehensive review is on the various analytical methods designed to meet the requirements for gibberellins analyses in complex matrices with particular emphasis on high-throughput analytical methods, such as gas chromatography, liquid chromatography, and capillary electrophoresis, mostly combined with mass spectrometry. The advantages and drawbacks of the each described analytical method are discussed. The overall aim of this review is to provide a comprehensive and critical view on the different analytical methods nowadays employed to analyze gibberellins in complex sample matrices and their foreseeable trends. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Classification of Hyperspectral Data Based on Guided Filtering and Random Forest

NASA Astrophysics Data System (ADS)

Ma, H.; Feng, W.; Cao, X.; Wang, L.

2017-09-01

Hyperspectral images usually consist of more than one hundred spectral bands, which have potentials to provide rich spatial and spectral information. However, the application of hyperspectral data is still challengeable due to "the curse of dimensionality". In this context, many techniques, which aim to make full use of both the spatial and spectral information, are investigated. In order to preserve the geometrical information, meanwhile, with less spectral bands, we propose a novel method, which combines principal components analysis (PCA), guided image filtering and the random forest classifier (RF). In detail, PCA is firstly employed to reduce the dimension of spectral bands. Secondly, the guided image filtering technique is introduced to smooth land object, meanwhile preserving the edge of objects. Finally, the features are fed into RF classifier. To illustrate the effectiveness of the method, we carry out experiments over the popular Indian Pines data set, which is collected by Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) sensor. By comparing the proposed method with the method of only using PCA or guided image filter, we find that effect of the proposed method is better.

Cost-effectiveness of telehealthcare to patients with chronic obstructive pulmonary disease: results from the Danish 'TeleCare North' cluster-randomised trial.

PubMed

Witt Udsen, Flemming; Lilholt, Pernille Heyckendorff; Hejlesen, Ole; Ehlers, Lars

2017-05-17

To investigate the cost-effectiveness of a telehealthcare solution in addition to usual care compared with usual care. A 12-month cost-utility analysis conducted alongside a cluster-randomised trial. Community-based setting in the geographical area of North Denmark Region in Denmark. 26 municipality districts define randomisation clusters with 13 districts in each arm. 1225 patients with chronic obstructive pulmonary disease were enrolled, of which 578 patients were randomised to telehealthcare and 647 to usual care. In addition to usual care, patients in the intervention group received a set of telehealthcare equipment and were monitored by a municipality-based healthcare team. Patients in the control group received usual care. Incremental costs per quality-adjusted life-years gained from baseline up to 12 months follow-up. From a healthcare and social sector perspective, the adjusted mean difference in total costs between telehealthcare and usual care was €728 (95% CI -754 to 2211) and the adjusted mean difference in quality-adjusted life-years gained was 0.0132 (95% CI -0.0083 to 0.0346). The incremental cost-effectiveness ratio was €55 327 per quality-adjusted life-year gained. Decision-makers should be willing to pay more than €55 000 to achieve a probability of cost-effectiveness >50%. This conclusion is robust to changes in the definition of hospital contacts and reduced intervention costs. Only in the most optimistic scenario combining the effects of all sensitivity analyses, does the incremental cost-effectiveness ratio fall below the UK thresholds values (€21 068 per quality-adjusted life-year). Telehealthcare is unlikely to be a cost-effective addition to usual care, if it is offered to all patients with chronic obstructive pulmonary disease and if the willingness-to-pay threshold values from the National Institute for Health and Care Excellence are applied. Clinicaltrials.gov, NCT01984840, 14 November 2013. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Automobile industry occupations and bladder cancer: a population-based case-control study in southeastern Michigan, USA.

PubMed

Kobrosly, R W; Meliker, J R; Nriagu, J O

2009-10-01

To determine whether employees in the automobile industry in Michigan are at elevated risk of urinary bladder cancer. The authors conducted a population-based case-control study including 418 cases and 571 controls. History of employment within the automobile industry was coded according to the US Census Bureau Index of Occupations. Logistic regression analyses were adjusted for age at interview, cigarette smoking status, and highest education level, and used to assess associations between bladder cancer and (1) ever working in particular occupations within the automobile industry; and (2) usual occupation - defined as occupation of longest duration for each subject. Ever having worked in the automobile industry and usual employment within the industry exhibited elevated non-significant risks for bladder cancer among assembly line workers, painters and foremen. A higher risk was seen for those who worked for 20 or more years on the assembly line (OR = 2.10, 95% CI 1.15 to 3.80). Statistical interaction between usual employment on the assembly line and smoking status (>5 pack-years) was demonstrated (OR = 6.19, 95% CI 2.69 to 14.24). Among workers on the assembly line for at least 20 years, we observed an approximately twofold risk for bladder cancer. Heavy smokers working on the assembly line experience a sixfold risk for bladder cancer. Further research is necessary to verify this finding, identify the exposures that might be contributing to bladder cancer on the assembly line, and examine whether those exposures continue to persist in today's workplace.

Detecting dominant motion patterns in crowds of pedestrians

NASA Astrophysics Data System (ADS)

Saqib, Muhammad; Khan, Sultan Daud; Blumenstein, Michael

2017-02-01

As the population of the world increases, urbanization generates crowding situations which poses challenges to public safety and security. Manual analysis of crowded situations is a tedious job and usually prone to errors. In this paper, we propose a novel technique of crowd analysis, the aim of which is to detect different dominant motion patterns in real-time videos. A motion field is generated by computing the dense optical flow. The motion field is then divided into blocks. For each block, we adopt an Intra-clustering algorithm for detecting different flows within the block. Later on, we employ Inter-clustering for clustering the flow vectors among different blocks. We evaluate the performance of our approach on different real-time videos. The experimental results show that our proposed method is capable of detecting distinct motion patterns in crowded videos. Moreover, our algorithm outperforms state-of-the-art methods.

A Bayesian model averaging method for improving SMT phrase table

NASA Astrophysics Data System (ADS)

Duan, Nan

2013-03-01

Previous methods on improving translation quality by employing multiple SMT models usually carry out as a second-pass decision procedure on hypotheses from multiple systems using extra features instead of using features in existing models in more depth. In this paper, we propose translation model generalization (TMG), an approach that updates probability feature values for the translation model being used based on the model itself and a set of auxiliary models, aiming to alleviate the over-estimation problem and enhance translation quality in the first-pass decoding phase. We validate our approach for translation models based on auxiliary models built by two different ways. We also introduce novel probability variance features into the log-linear models for further improvements. We conclude our approach can be developed independently and integrated into current SMT pipeline directly. We demonstrate BLEU improvements on the NIST Chinese-to-English MT tasks for single-system decodings.

The determination of lead in sugar and sweets without digestion by electrothermal atomic absorption spectrometry (ETAAS) with a rhodium chemical modifier.

PubMed

Dias, V M C; Cardoso, A S B

2006-05-01

Reference methods for determining lead in food are usually time-consuming. This paper reports a straightforward procedure using electrothermal atomic absorption spectrometry (ETAAS), to determine lead (Pb) in fat-free sweets. Several chemical modifiers were examined and results showed that it is not necessary to digest the samples, when a rhodium (Rh) modifier was used. The samples were dissolved in nitric acid and the determination of Pb was performed by ETAAS, using Rh chemical modifier at a pyrolysis temperature of 900 degrees C and an atomization temperature of 1,500 degrees C. No ashing step was employed and aqueous standards were used, in the range 2-10 microg l(-1). The limit of quantification was 0.095 mg kg(-1), and the accuracy of the method was verified by analysing certified reference materials.

New fuzzy support vector machine for the class imbalance problem in medical datasets classification.

PubMed

Gu, Xiaoqing; Ni, Tongguang; Wang, Hongyuan

2014-01-01

In medical datasets classification, support vector machine (SVM) is considered to be one of the most successful methods. However, most of the real-world medical datasets usually contain some outliers/noise and data often have class imbalance problems. In this paper, a fuzzy support machine (FSVM) for the class imbalance problem (called FSVM-CIP) is presented, which can be seen as a modified class of FSVM by extending manifold regularization and assigning two misclassification costs for two classes. The proposed FSVM-CIP can be used to handle the class imbalance problem in the presence of outliers/noise, and enhance the locality maximum margin. Five real-world medical datasets, breast, heart, hepatitis, BUPA liver, and pima diabetes, from the UCI medical database are employed to illustrate the method presented in this paper. Experimental results on these datasets show the outperformed or comparable effectiveness of FSVM-CIP.

Joint reproductive autonomy: does Evans v Amicus Healthcare Ltd provide for a gender-neutral approach to assisted reproductive rights?

PubMed

Allin, Michael J

2015-06-01

Assisted reproductive technology encompasses methods of achieving pregnancy by artificial or partially artificial means. Whilst these methods are more commonly used by couples suffering from problems of infertility, some forms of assistance are employed by fertile couples, for example pre-implantation genetic diagnosis. The overall regulatory framework in the UK is predominantly found in the Human Fertilisation and Embryology Act 1990. The usual rules relating to consent and autonomy apply and were discussed in depth in Evans v Amicus Healthcare Ltd and later in Evans v United Kingdom. This paper considers whether the Evans litigation envisages the possibility of further encouraging joint autonomy in the use of zygotes and whether there is a continuing right to autonomy by the party not bearing the pregnancy. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Hadron spectrum of quenched QCD on a 32{sup 3} {times} 64 lattice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Seyong; Sinclair, D.K.

1992-10-01

Preliminary results from a hadron spectrum calculation of quenched Quantumchromodynamics on a 32{sup 3} {times} 64 lattice at {beta} = 6.5 are reported. The hadron spectrum calculation is done with staggered quarks of masses, m{sub q}a = 0.001, 0.005 and 0.0025. We use two different sources in order to be able to extract the {Delta} mass in addition to the usual local light hadron masses. The numerical simulation is executed on the Intel Touchstone Delta computer. The peak speed of the Delta for a 16 {times} 32 mesh configuration is 41 Gflops for 32 bit precision. The sustained speed formore » our updating code is 9.5 Gflops. A multihit metropolis algorithm combined with an over-relaxation method is used in the updating and the conjugate gradient method is employed for Dirac matrix inversion. Configurations are stored every 1000 sweeps.« less

Hadron spectrum of quenched QCD on a 32[sup 3] [times] 64 lattice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Seyong; Sinclair, D.K.

1992-10-01

Preliminary results from a hadron spectrum calculation of quenched Quantumchromodynamics on a 32[sup 3] [times] 64 lattice at [beta] = 6.5 are reported. The hadron spectrum calculation is done with staggered quarks of masses, m[sub q]a = 0.001, 0.005 and 0.0025. We use two different sources in order to be able to extract the [Delta] mass in addition to the usual local light hadron masses. The numerical simulation is executed on the Intel Touchstone Delta computer. The peak speed of the Delta for a 16 [times] 32 mesh configuration is 41 Gflops for 32 bit precision. The sustained speed formore » our updating code is 9.5 Gflops. A multihit metropolis algorithm combined with an over-relaxation method is used in the updating and the conjugate gradient method is employed for Dirac matrix inversion. Configurations are stored every 1000 sweeps.« less

A false sense of security? Can tiered approach be trusted to accurately classify immunogenicity samples?

PubMed

Jaki, Thomas; Allacher, Peter; Horling, Frank

2016-09-05

Detecting and characterizing of anti-drug antibodies (ADA) against a protein therapeutic are crucially important to monitor the unwanted immune response. Usually a multi-tiered approach that initially rapidly screens for positive samples that are subsequently confirmed in a separate assay is employed for testing of patient samples for ADA activity. In this manuscript we evaluate the ability of different methods used to classify subject with screening and competition based confirmatory assays. We find that for the overall performance of the multi-stage process the method used for confirmation is most important where a t-test is best when differences are moderate to large. Moreover we find that, when differences between positive and negative samples are not sufficiently large, using a competition based confirmation step does yield poor classification of positive samples. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Results of a multisite randomized trial of supported employment interventions for individuals with severe mental illness.

PubMed

Cook, Judith A; Leff, H Stephen; Blyler, Crystal R; Gold, Paul B; Goldberg, Richard W; Mueser, Kim T; Toprac, Marcia G; McFarlane, William R; Shafer, Michael S; Blankertz, Laura E; Dudek, Ken; Razzano, Lisa A; Grey, Dennis D; Burke-Miller, Jane

2005-05-01

National probability surveys indicate that most individuals with schizophrenia and other severe mental illnesses are not employed. This multisite study tested the effectiveness of supported employment (SE) models combining clinical and vocational rehabilitation services to establish competitive employment. We randomly assigned 1273 outpatients with severe mental illness from 7 states in the United States to an experimental SE program or to a comparison or a services-as-usual condition, with follow-up for 24 months. Participants were interviewed semiannually, paid employment was tracked weekly, and vocational and clinical services were measured monthly. Mixed-effects random regression analysis was used to predict the likelihood of competitive employment, working 40 or more hours in a given month, and monthly earnings. Cumulative results during 24 months show that experimental group participants (359/648 [55%]) were more likely than those in the comparison programs (210/625 [34%]) to achieve competitive employment (chi(2) = 61.17; P<.001). Similarly, patients in experimental group programs (330/648 [51%]) were more likely than those in comparison programs (245/625 [39%]) to work 40 or more hours in a given month (chi(2) = 17.66; P<.001). Finally, participants in experimental group programs had significantly higher monthly earnings than those in the comparison programs (mean, US 122 dollars/mo [n=639] vs US 99 dollars/mo [n=622]); t(1259) = -2.04; P<.05). In the multivariate longitudinal analysis, experimental condition subjects were more likely than comparison group subjects to be competitively employed, work 40 or more hours in a given month, and have higher earnings, despite controlling for demographic, clinical, work history, disability beneficiary status, and study site confounders. Moreover, the advantage of experimental over comparison group participants increased during the 24-month study period. The SE models tailored by integrating clinical and vocational services were more effective than services as usual or unenhanced services.

Speckle-reducing scale-invariant feature transform match for synthetic aperture radar image registration

NASA Astrophysics Data System (ADS)

Wang, Xianmin; Li, Bo; Xu, Qizhi

2016-07-01

The anisotropic scale space (ASS) is often used to enhance the performance of a scale-invariant feature transform (SIFT) algorithm in the registration of synthetic aperture radar (SAR) images. The existing ASS-based methods usually suffer from unstable keypoints and false matches, since the anisotropic diffusion filtering has limitations in reducing the speckle noise from SAR images while building the ASS image representation. We proposed a speckle reducing SIFT match method to obtain stable keypoints and acquire precise matches for the SAR image registration. First, the keypoints are detected in a speckle reducing anisotropic scale space constructed by the speckle reducing anisotropic diffusion, so that speckle noise is greatly reduced and prominent structures of the images are preserved, consequently the stable keypoints can be derived. Next, the probabilistic relaxation labeling approach is employed to establish the matches of the keypoints then the correct match rate of the keypoints is significantly increased. Experiments conducted on simulated speckled images and real SAR images demonstrate the effectiveness of the proposed method.

Stokes polarimetry using analysis of the nonlinear voltage-retardance relationship for liquid-crystal variable retarders

DOE Office of Scientific and Technical Information (OSTI.GOV)

López-Téllez, J. M., E-mail: jmlopez@comunidad.unam.mx; Bruce, N. C.

2014-03-15

We present a method for using liquid-crystal variable retarders (LCVR’s) with continually varying voltage to measure the Stokes vector of a light beam. The LCVR's are usually employed with fixed retardance values due to the nonlinear voltage-retardance behavior that they show. The nonlinear voltage-retardance relationship is first measured and then a linear fit of the known retardance terms to the detected signal is performed. We use known waveplates (half-wave and quarter-wave) as devices to provide controlled polarization states to the Stokes polarimeter and we use the measured Stokes parameters as functions of the orientation of the axes of the waveplatesmore » as an indication of the quality of the polarimeter. Results are compared to a Fourier analysis method that does not take into account the nonlinear voltage-retardance relationship and also to a Fourier analysis method that uses experimental voltage values to give a linear retardance function with time. Also, we present results of simulations for comparison.« less

Effective field renormalization group approach for Ising lattice spin systems

NASA Astrophysics Data System (ADS)

Fittipaldi, Ivon P.

1994-03-01

A new applicable real-space renormalization group framework (EFRG) for computing the critical properties of Ising lattice spin systems is presented. The method, which follows up the same strategy of the mean-field renormalization group scheme (MFRG), is based on rigorous Ising spin identities and utilizes a convenient differential operator expansion technique. Within this scheme, in contrast with the usual mean-field type of equation of state, all the relevant self-spin correlations are taken exactly into account. The results for the critical coupling and the critical exponent v, for the correlation length, are very satisfactory and it is shown that this technique leads to rather accurate results which represent a remarkable improvement on those obtained from the standard MFRG method. In particular, it is shown that the present EFRG approach correctly distinguishes the geometry of the lattice structure even when employing its simplest size-cluster version. Owing to its simplicity we also comment on the wide applicability of the present method to problems in crystalline and disordered Ising spin systems.

Fast quantification of bovine milk proteins employing external cavity-quantum cascade laser spectroscopy.

PubMed

Schwaighofer, Andreas; Kuligowski, Julia; Quintás, Guillermo; Mayer, Helmut K; Lendl, Bernhard

2018-06-30

Analysis of proteins in bovine milk is usually tackled by time-consuming analytical approaches involving wet-chemical, multi-step sample clean-up procedures. The use of external cavity-quantum cascade laser (EC-QCL) based IR spectroscopy was evaluated as an alternative screening tool for direct and simultaneous quantification of individual proteins (i.e. casein and β-lactoglobulin) and total protein content in commercial bovine milk samples. Mid-IR spectra of protein standard mixtures were used for building partial least squares (PLS) regression models. A sample set comprising different milk types (pasteurized; differently processed extended shelf life, ESL; ultra-high temperature, UHT) was analysed and results were compared to reference methods. Concentration values of the QCL-IR spectroscopy approach obtained within several minutes are in good agreement with reference methods involving multiple sample preparation steps. The potential application as a fast screening method for estimating the heat load applied to liquid milk is demonstrated. Copyright © 2018 Elsevier Ltd. All rights reserved.

Overestimation of Albumin Measured by Bromocresol Green vs Bromocresol Purple Method: Influence of Acute-Phase Globulins.

PubMed

Garcia Moreira, Vanessa; Beridze Vaktangova, Nana; Martinez Gago, Maria Dolores; Laborda Gonzalez, Belen; Garcia Alonso, Sara; Fernandez Rodriguez, Eloy

2018-05-22

Usually serum albumin is measured with dye-binding assay as bromocresol green (BCG) and bromocresol purple (BCP) methods. The aim of this paper was to examine the differences in albumin measurements between the Advia2400 BCG method (AlbBCG), Dimension RxL BCP (AlbBCP) and capillary zone electrophoresis (CZE). Albumin concentrations from 165 serum samples were analysed using AlbBCG, AlbBCP and CZE. CZE was employed to estimate different serum protein fractions. Influence of globulins on albumin concentration discrepancies between methods was estimated as well as the impact of the albumin method on aCa concentrations. Medcalc was employed for statistical analysis, setting a value of P < 0.05 as significant. Correlation of AlbBCG and AlbBCP was r = 0.948 (p < 0.0001), but mean difference was large. Bland-Altman plots showed greater bias at lower albumin concentrations. AlbBCG were positively biased versus CZE (3.54 g/L). There was good agreement between CZE and ALbBCP (< 1 g/L). The AlbBCG assay bias shows a good correlation with alpha-1-globulin concentrations (r = 0.758); moderate and weak correlations were observed with CRP (r = 0.729) and alpha-2-globulin (r = 0.585); we found no correlation with beta-globulin (r = 0.120) or gamma-globulin (r = -0.303). Mean aCa based on AlbBCG and AlbBCP methods were 2.34 ± 0.15 mmol/L and 2.46 ± 0.16 mmol/L (p < 0.01), with a mean BCG-BCP difference of -0.12. Albumin results from the BCP and BCG methods may result in unacceptable differences and clinical confusion, especially at lower albumin concentrations. Serum acute phase proteins contribute to overestimating the albumin concentration using AlbBCG.

Color calibration and color-managed medical displays: does the calibration method matter?

NASA Astrophysics Data System (ADS)

Roehrig, Hans; Rehm, Kelly; Silverstein, Louis D.; Dallas, William J.; Fan, Jiahua; Krupinski, Elizabeth A.

2010-02-01

Our laboratory has investigated the efficacy of a suite of color calibration and monitor profiling packages which employ a variety of color measurement sensors. Each of the methods computes gamma correction tables for the red, green and blue color channels of a monitor that attempt to: a) match a desired luminance range and tone reproduction curve; and b) maintain a target neutral point across the range of grey values. All of the methods examined here produce International Color Consortium (ICC) profiles that describe the color rendering capabilities of the monitor after calibration. Color profiles incorporate a transfer matrix that establishes the relationship between RGB driving levels and the International Commission on Illumination (CIE) XYZ (tristimulus) values of the resulting on-screen color; the matrix is developed by displaying color patches of known RGB values on the monitor and measuring the tristimulus values with a sensor. The number and chromatic distribution of color patches varies across methods and is usually not under user control. In this work we examine the effect of employing differing calibration and profiling methods on rendition of color images. A series of color patches encoded in sRGB color space were presented on the monitor using color-management software that utilized the ICC profile produced by each method. The patches were displayed on the calibrated monitor and measured with a Minolta CS200 colorimeter. Differences in intended and achieved luminance and chromaticity were computed using the CIE DE2000 color-difference metric, in which a value of ▵E = 1 is generally considered to be approximately one just noticeable difference (JND) in color. We observed between one and 17 JND's for individual colors, depending on calibration method and target.

Advertising Field Experience and Experiential Learning.

ERIC Educational Resources Information Center

Keenan, Kevin L.

1992-01-01

Presents research describing internship arrangements at colleges and universities with advertising programs. Finds that internships are widely used, are most often optional, and are usually awarded academic credit. Discusses grading systems, scheduling, employment offers, and types of work required. (SR)

Continuous catalytic decomposition of methane

NASA Technical Reports Server (NTRS)

Clifford, J. E.; Hillenbrand, L. J.; Kim, B. C.; Kolic, E. S.; Zupan, J.

1973-01-01

Water is conserved by employing sequence of reactions whereby 75 percent of methane from Sabatier reaction is decomposed to solid carbon and hydrogen; hydrogen is then separated from residual methane and utilized in usual Sabatier reaction to reduce remaining metabolic carbon dioxide.

California voting and suburbanization patterns : implications for transit policy.

DOT National Transportation Integrated Search

2013-07-01

Public transit is an environmentally friendly transportation mode that usually focuses on transporting people within and to the city : center. However, over the last 60 years, population and employment has been suburbanizing. As the median voter live...

Whistleblowing and the bioethicist's public obligations.

PubMed

MacDougall, D Robert

2014-10-01

Bioethicists are sometimes thought to have heightened obligations by virtue of the fact that their professional role addresses ethics or morals. For this reason it has been argued that bioethicists ought to "whistleblow"--that is, publicly expose the wrongful or potentially harmful activities of their employer--more often than do other kinds of employees. This article argues that bioethicists do indeed have a heightened obligation to whistleblow, but not because bioethicists have heightened moral obligations in general. Rather, the special duties of bioethicists to act as whistleblowers are best understood by examining the nature of the ethical dilemma typically encountered by private employees and showing why bioethicists do not encounter this dilemma in the same way. Whistleblowing is usually understood as a moral dilemma involving conflicting duties to two parties: the public and a private employer. However, this article argues that this way of understanding whistleblowing has the implication that professions whose members identify their employer as the public-such as government employees or public servants--cannot consider whistleblowing a moral dilemma, because obligations are ultimately owed to only one party: the public. The article contends that bioethicists--even when privately employed--are similar to government employees in the sense that they do not have obligations to defer to the judgments of those with private interests. Consequently, bioethicists may be considered to have a special duty to whistleblow, although for different reasons than those usually cited.

A simple and rapid method to isolate purer M13 phage by isoelectric precipitation.

PubMed

Dong, Dexian; Sutaria, Sanjana; Hwangbo, Je Yeol; Chen, P

2013-09-01

M13 virus (phage) has been extensively used in phage display technology and nanomaterial templating. Our research aimed to use M13 phage to template sulfur nanoparticles for making lithium ion batteries. Traditional methods for harvesting M13 phage from Escherichia coli employ polyethylene glycol (PEG)-based precipitation, and the yield is usually measured by plaque counting. With this method, PEG residue is present in the M13 phage pellet and is difficult to eliminate. To resolve this issue, a method based on isoelectric precipitation was introduced and tested. The isoelectric method resulted in the production of purer phage with a higher yield, compared to the traditional PEG-based method. There is no significant variation in infectivity of the phage prepared using isoelectric precipitation, and the dynamic light scattering data indirectly prove that the phage structure is not damaged by pH adjustment. To maximize phage production, a dry-weight yield curve of M13 phage for various culture times was produced. The yield curve is proportional to the growth curve of E. coli. On a 200-mL culture scale, 0.2 g L(-1) M13 phage (dry-weight) was produced by the isoelectric precipitation method.

Determination of magnetic helicity in the solar wind and implications for cosmic ray propagation

NASA Technical Reports Server (NTRS)

Matthaeus, W. M.; Goldstein, M. L.

1981-01-01

Magnetic helicity (Hm) is the mean value of the correlation between a turbulent magnetic field and the magnetic vector potential. A technique is described for determining Hm and its 'reduced' spectrum from the two point magnetic correlation matrix. The application of the derived formalism to solar wind magnetic fluctuations is discussed, taking into account cases for which only single point measurements are available. The application procedure employs the usual 'frozen in approximation' approach. The considered method is applied to an analysis of several periods of Voyager 2 interplanetary magnetometer data near 2.8 AU. During these periods the correlation length, or energy containing length, was found to be approximately 3 x 10 to the 11th cm

[Quantitative characterization of nuclear polymorphism of the epithelial cells in fibroadenomatosis and cancer of the breast].

PubMed

Ganina, K P; Petunin, Iu I; Timoshenko, Ia G

1989-01-01

A method for quantitative analysis of epithelial cell nuclear polymorphism was suggested, viz. identification of general statistical population using Petunin's criterion. This criterion was employed to assess heterogeneity of visible surface of interphase epithelial cell nuclei and to assay nuclear DNA level in fibroadenomatous hyperplasia and cancer of the breast. Heterogeneity index (h), alongside with other parameters, appeared useful for quantitative assessment of the disease: heterogeneity index values ranging 0.1-0.4 point to pronounced heterogeneity of epithelial cell nucleus surface and DNA level, and are suggestive of malignant transformation of tissue, whereas benign proliferation of the epithelium is usually characterized by 0.4 less than h less than or equal to 0.9.

Analysis of general-aviation accidents using ATC radar records

NASA Technical Reports Server (NTRS)

Wingrove, R. C.; Bach, R. E., Jr.

1982-01-01

It is pointed out that general aviation aircraft usually do not carry flight recorders, and in accident investigations the only available data may come from the Air Traffic Control (ATC) records. A description is presented of a technique for deriving time-histories of aircraft motions from ATC radar records. The employed procedure involves a smoothing of the raw radar data. The smoothed results, in combination with other available information (meteorological data and aircraft aerodynamic data) are used to derive the expanded set of motion time-histories. Applications of the considered analytical methods are related to different types of aircraft, such as light piston-props, executive jets, and commuter turboprops, as well as different accident situations, such as takeoff, climb-out, icing, and deep stall.

EXAFS characterisation of metal bonding in highly luminescent, UV stable, water-soluble and biocompatible lanthanide complexes

NASA Astrophysics Data System (ADS)

Kalyakina, A.; Utochnikova, V.; Trigub, A.; Zubavichus, Y.; Kuzmina, N.; Bräse, S.

2016-05-01

The combination of X-ray diffraction with EXAFS was employed to assess the coordination environment of lanthanide complexes in solutions. This method is based on the assumption that the local structure of lanthanide complexes in solution combines elements of the crystal structure of the complex in the solid state (single- or polycrystalline) and the elements of the local structure of a lanthanide salt, completely dissociated in the solvent (usually chlorides). The success of this approach is demonstrated with the lanthanide (III) 2,3,4,5,6-pentafluorobenzoate complexes, where the local structure in aqueous and methanol solutions were estimated. Moreover, the dissociation degree of the complexes in aqueous and methanol solutions was evaluated.

Effects of Simplifying Choice Tasks on Estimates of Taste Heterogeneity in Stated-Choice Surveys

PubMed Central

Johnson, F. Reed; Ozdemir, Semra; Phillips, Kathryn A

2011-01-01

Researchers usually employ orthogonal arrays or D-optimal designs with little or no attribute overlap in stated-choice surveys. The challenge is to balance statistical efficiency and respondent burden to minimize the overall error in the survey responses. This study examined whether simplifying the choice task, by using a design with more overlap, provides advantages over standard minimum-overlap methods. We administered two designs for eliciting HIV test preferences to split samples. Surveys were undertaken at four HIV testing locations in San Francisco, California. Personal characteristics had different effects on willingness to pay for the two treatments, and gains in statistical efficiency in the minimal-overlap version more than compensated for possible imprecision from increased measurement error. PMID:19880234

Investigation of kinetic friction using an iPhone

NASA Astrophysics Data System (ADS)

Baldock, Clive; Johnson, Roger

2016-11-01

The iPhone is particularly suitable for mechanics experiments using the in-built acceleration sensor or accelerometer in-conjunction with the on-board data collection facility and a downloadable so-called ‘app’. In this work the iPhone has been used to investigate the acceleration due to gravity and determine the coefficient of kinetic friction, μ k of the iPhone as an object sliding down an inclined plane. This method is more accurate than that usually employed in the laboratory where the ‘fits and starts’ of the block sliding down the inclined plane potentially invalidate the required assumption that the velocity is constant. In its simplest form the measurement of acceleration is required to be undertaken for only 2 angles.

Dynamic Online Bandwidth Adjustment Scheme Based on Kalai-Smorodinsky Bargaining Solution

NASA Astrophysics Data System (ADS)

Kim, Sungwook

Virtual Private Network (VPN) is a cost effective method to provide integrated multimedia services. Usually heterogeneous multimedia data can be categorized into different types according to the required Quality of Service (QoS). Therefore, VPN should support the prioritization among different services. In order to support multiple types of services with different QoS requirements, efficient bandwidth management algorithms are important issues. In this paper, I employ the Kalai-Smorodinsky Bargaining Solution (KSBS) for the development of an adaptive bandwidth adjustment algorithm. In addition, to effectively manage the bandwidth in VPNs, the proposed control paradigm is realized in a dynamic online approach, which is practical for real network operations. The simulations show that the proposed scheme can significantly improve the system performances.

Should we reconsider the routine use of placebo controls in clinical research?

PubMed

Avins, Andrew L; Cherkin, Daniel C; Sherman, Karen J; Goldberg, Harley; Pressman, Alice

2012-04-27

Modern clinical-research practice favors placebo controls over usual-care controls whenever a credible placebo exists. An unrecognized consequence of this preference is that clinicians are more limited in their ability to provide the benefits of the non-specific healing effects of placebos in clinical practice. We examined the issues in choosing between placebo and usual-care controls. We considered why placebo controls place constraints on clinicians and the trade-offs involved in the choice of control groups. We find that, for certain studies, investigators should consider usual-care controls, even if an adequate placebo is available. Employing usual-care controls would be of greatest value for pragmatic trials evaluating treatments to improve clinical care and for which threats to internal validity can be adequately managed without a placebo-control condition. Intentionally choosing usual-care controls, even when a satisfactory placebo exists, would allow clinicians to capture the value of non-specific therapeutic benefits that are common to all interventions. The result could be more effective, patient-centered care that makes the best use of both specific and non-specific benefits of medical interventions.

Medical teleconferencing with high-definition video presentation on the 'usual' Internet.

PubMed

Obuchi, Toshiro; Shima, Hiroji; Iwasaki, Akinori

2013-06-01

Although medical teleconferences on advanced academic networks have been common (Telemed J E Health 15:112-117, 1; Asian J Endosc Surg 3:185-188, 2; Surg Today 41:1579-1581, 3; Telemedicine development center of Asia. http://www.aqua.med.kyushu-u.ac.jp/eg/index.html . Accessed 6 March 2013, 4), reports regarding 'usual' Internet teleconferences or tele-lectures employing a telecommunication system for business use are very rare. Medical teleconferences and tele-lectures on the Internet were held three times between our institutions and other institutions, using the 'HD Com' made by Panasonic (HD Com. http://panasonic.biz/com/visual/ . Accessed 6 March 2013, 5), which is a high-definition telecommunication system for business tele-meeting. All of our medical telecommunications were successfully completed without any troubles. This system allows for all kinds of presentations using personal computers to be made from each station, so that discussions with high-definition surgical video presentation, which has recently been developed, could be effortlessly established despite the distance between institutions. Unlike telecommunication using advanced academic networks, this system can run without any need for specific engineering support, on the usual Internet. Medical telecommunication employing this system is likely to become common among ordinary hospitals in the near future.

Employers' knowledge and attitudes regarding organizational policy toward workers caring for aging family members.

PubMed

Katz, Ruth; Lowenstein, Ariela; Prilutzky, Dana; Halperin, Dafna

2011-04-01

The study examined employers' knowledge of and attitudes toward working carers who care for aging family members. The study was based on the ecological model. One hundred employers were interviewed using structured questionnaires and 13 employers by additional in-depth interviews. Both research instruments included areas of disruption to the organization, existing policies, and feasibility as to developing appropriate policies to support working carers. Results show that caregiving caused a disruption in workers' functioning mainly by being absent, leaving work early, and coming to work late. Usually, there was "no policy," and half of the employers did not support introducing such a policy. Women managers in public organizations, who had less seniority and less previous experience with working-carers, tended to be more positive about supportive policies. Recommendations are included.

Direct determination of sorbitol and sodium glutamate by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) in the thermostabilizer employed in the production of yellow-fever vaccine.

PubMed

de Castro, Eduardo da S G; Cassella, Ricardo J

2016-05-15

Reference methods for quality control of vaccines usually require treatment of the samples before analysis. These procedures are expensive, time-consuming, unhealthy and require careful manipulation of the sample, making them a potential source of analytical errors. This work proposes a novel method for the quality control of thermostabilizer samples of the yellow fever vaccine employing attenuated total reflectance Fourier transform infrared spectrometry (ATR-FTIR). The main advantage of the proposed method is the possibility of direct determination of the analytes (sodium glutamate and sorbitol) without any pretreatment of the samples. Operational parameters of the FTIR technique, such as the number of accumulated scans and nominal resolution, were evaluated. The best conditions for sodium glutamate were achieved when 64 scans were accumulated using a nominal resolution of 4 cm(-1). The measurements for sodium glutamate were performed at 1347 cm(-1) (baseline correction between 1322 and 1369 cm(-1)). In the case of sorbitol, the measurements were done at 890cm(-1) (baseline correction between 825 and 910 cm(-1)) using a nominal resolution of 2 cm(-1) with 32 accumulated scans. In both cases, the quantitative variable was the band height. Recovery tests were performed in order to evaluate the accuracy of the method and recovery percentages in the range 93-106% were obtained. Also, the methods were compared with reference methods and no statistical differences were observed. The limits of detection and quantification for sodium glutamate were 0.20 and 0.62% (m/v), respectively, whereas for sorbitol they were 1 and 3.3% (m/v), respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

Pareto Design of State Feedback Tracking Control of a Biped Robot via Multiobjective PSO in Comparison with Sigma Method and Genetic Algorithms: Modified NSGAII and MATLAB's Toolbox

PubMed Central

Mahmoodabadi, M. J.; Taherkhorsandi, M.; Bagheri, A.

2014-01-01

An optimal robust state feedback tracking controller is introduced to control a biped robot. In the literature, the parameters of the controller are usually determined by a tedious trial and error process. To eliminate this process and design the parameters of the proposed controller, the multiobjective evolutionary algorithms, that is, the proposed method, modified NSGAII, Sigma method, and MATLAB's Toolbox MOGA, are employed in this study. Among the used evolutionary optimization algorithms to design the controller for biped robots, the proposed method operates better in the aspect of designing the controller since it provides ample opportunities for designers to choose the most appropriate point based upon the design criteria. Three points are chosen from the nondominated solutions of the obtained Pareto front based on two conflicting objective functions, that is, the normalized summation of angle errors and normalized summation of control effort. Obtained results elucidate the efficiency of the proposed controller in order to control a biped robot. PMID:24616619

An improved predictive functional control method with application to PMSM systems

NASA Astrophysics Data System (ADS)

Li, Shihua; Liu, Huixian; Fu, Wenshu

2017-01-01

In common design of prediction model-based control method, usually disturbances are not considered in the prediction model as well as the control design. For the control systems with large amplitude or strong disturbances, it is difficult to precisely predict the future outputs according to the conventional prediction model, and thus the desired optimal closed-loop performance will be degraded to some extent. To this end, an improved predictive functional control (PFC) method is developed in this paper by embedding disturbance information into the system model. Here, a composite prediction model is thus obtained by embedding the estimated value of disturbances, where disturbance observer (DOB) is employed to estimate the lumped disturbances. So the influence of disturbances on system is taken into account in optimisation procedure. Finally, considering the speed control problem for permanent magnet synchronous motor (PMSM) servo system, a control scheme based on the improved PFC method is designed to ensure an optimal closed-loop performance even in the presence of disturbances. Simulation and experimental results based on a hardware platform are provided to confirm the effectiveness of the proposed algorithm.

Rapid Microcystin Determination Using a Paper Spray Ionization Method with a Time-of-Flight Mass Spectrometry System.

PubMed

Zhu, Xiaoqiang; Huang, Zhengxu; Gao, Wei; Li, Xue; Li, Lei; Zhu, Hui; Mo, Ting; Huang, Bao; Zhou, Zhen

2016-07-13

The eutrophication of surface water sources and climate changes have resulted in an annual explosion of cyanobacterial blooms in many irrigating and drinking water resources. To decrease health risks to the public, a rapid real time method for the synchronous determination of two usually harmful microcystins (MC-RR and MC-LR) in environmental water samples was built by employing a paper spray ionization method coupled with a time-of-flight mass spectrometer system. With this approach, direct analysis of microcystin mixtures without sample preparation has been achieved. Rapid detection was performed, simulating the release process of microcystins in reservoir water samples, and the routine detection frequency was every three minutes. The identification time of microcystins was reduced from several hours to a few minutes. The limit of detection is 1 μg/L, and the limit of quantitation is 3 μg/L. This method displays the ability for carrying out rapid, direct, and high-throughput experiments for determination of microcystins, and it would be of significant interest for environmental and food safety applications.

A Decision-Based Modified Total Variation Diffusion Method for Impulse Noise Removal

PubMed Central

Zhu, Qingxin; Song, Xiuli; Tao, Jinsong

2017-01-01

Impulsive noise removal usually employs median filtering, switching median filtering, the total variation L1 method, and variants. These approaches however often introduce excessive smoothing and can result in extensive visual feature blurring and thus are suitable only for images with low density noise. A new method to remove noise is proposed in this paper to overcome this limitation, which divides pixels into different categories based on different noise characteristics. If an image is corrupted by salt-and-pepper noise, the pixels are divided into corrupted and noise-free; if the image is corrupted by random valued impulses, the pixels are divided into corrupted, noise-free, and possibly corrupted. Pixels falling into different categories are processed differently. If a pixel is corrupted, modified total variation diffusion is applied; if the pixel is possibly corrupted, weighted total variation diffusion is applied; otherwise, the pixel is left unchanged. Experimental results show that the proposed method is robust to different noise strengths and suitable for different images, with strong noise removal capability as shown by PSNR/SSIM results as well as the visual quality of restored images. PMID:28536602

Resolution for color photography

NASA Astrophysics Data System (ADS)

Hubel, Paul M.; Bautsch, Markus

2006-02-01

Although it is well known that luminance resolution is most important, the ability to accurately render colored details, color textures, and colored fabrics cannot be overlooked. This includes the ability to accurately render single-pixel color details as well as avoiding color aliasing. All consumer digital cameras on the market today record in color and the scenes people are photographing are usually color. Yet almost all resolution measurements made on color cameras are done using a black and white target. In this paper we present several methods for measuring and quantifying color resolution. The first method, detailed in a previous publication, uses a slanted-edge target of two colored surfaces in place of the standard black and white edge pattern. The second method employs the standard black and white targets recommended in the ISO standard, but records these onto the camera through colored filters thus giving modulation between black and one particular color component; red, green, and blue color separation filters are used in this study. The third method, conducted at Stiftung Warentest, an independent consumer organization of Germany, uses a whitelight interferometer to generate fringe pattern targets of varying color and spatial frequency.

Usual coffee intake in Brazil: results from the National Dietary Survey 2008-9.

PubMed

Sousa, Alessandra Gaspar; da Costa, Teresa Helena Macedo

2015-05-28

Coffee is central to the economy of many developing countries, as well as to the world economy. However, despite the widespread consumption of coffee, there are very few available data showing the usual intake of this beverage. Surveying usual coffee intake is a way of monitoring one aspect of a population's usual dietary intake. Thus, the present study aimed to characterise the usual daily coffee intake in the Brazilian population. We used data from the National Dietary Survey collected in 2008-9 from a probabilistic sample of 34,003 Brazilians aged 10 years and older. The National Cancer Institute method was applied to obtain the usual intake based on two nonconsecutive food diaries, and descriptive statistical analyses were performed by age and sex for Brazil and its regions. The estimated average usual daily coffee intake of the Brazilian population was 163 (SE 2.8) ml. The comparison by sex showed that males had a 12% greater usual coffee intake than females. In addition, the highest intake was recorded among older males. Among the five regions surveyed, the North-East had the highest usual coffee intake (175 ml). The most common method of brewing coffee was filtered/instant coffee (71%), and the main method of sweetening beverages was with sugar (87%). In Brazil, the mean usual coffee intake corresponds to 163 ml, or 1.5 cups/d. Differences in usual coffee intake according to sex and age differed among the five Brazilian regions.

SU-E-I-07: An Improved Technique for Scatter Correction in PET

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, S; Wang, Y; Lue, K

2014-06-01

Purpose: In positron emission tomography (PET), the single scatter simulation (SSS) algorithm is widely used for scatter estimation in clinical scans. However, bias usually occurs at the essential steps of scaling the computed SSS distribution to real scatter amounts by employing the scatter-only projection tail. The bias can be amplified when the scatter-only projection tail is too small, resulting in incorrect scatter correction. To this end, we propose a novel scatter calibration technique to accurately estimate the amount of scatter using pre-determined scatter fraction (SF) function instead of the employment of scatter-only tail information. Methods: As the SF depends onmore » the radioactivity distribution and the attenuating material of the patient, an accurate theoretical relation cannot be devised. Instead, we constructed an empirical transformation function between SFs and average attenuation coefficients based on a serious of phantom studies with different sizes and materials. From the average attenuation coefficient, the predicted SFs were calculated using empirical transformation function. Hence, real scatter amount can be obtained by scaling the SSS distribution with the predicted SFs. The simulation was conducted using the SimSET. The Siemens Biograph™ 6 PET scanner was modeled in this study. The Software for Tomographic Image Reconstruction (STIR) was employed to estimate the scatter and reconstruct images. The EEC phantom was adopted to evaluate the performance of our proposed technique. Results: The scatter-corrected image of our method demonstrated improved image contrast over that of SSS. For our technique and SSS of the reconstructed images, the normalized standard deviation were 0.053 and 0.182, respectively; the root mean squared errors were 11.852 and 13.767, respectively. Conclusion: We have proposed an alternative method to calibrate SSS (C-SSS) to the absolute scatter amounts using SF. This method can avoid the bias caused by the insufficient tail information and therefore improve the accuracy of scatter estimation.« less

A practical material decomposition method for x-ray dual spectral computed tomography.

PubMed

Hu, Jingjing; Zhao, Xing

2016-03-17

X-ray dual spectral CT (DSCT) scans the measured object with two different x-ray spectra, and the acquired rawdata can be used to perform the material decomposition of the object. Direct calibration methods allow a faster material decomposition for DSCT and can be separated in two groups: image-based and rawdata-based. The image-based method is an approximative method, and beam hardening artifacts remain in the resulting material-selective images. The rawdata-based method generally obtains better image quality than the image-based method, but this method requires geometrically consistent rawdata. However, today's clinical dual energy CT scanners usually measure different rays for different energy spectra and acquire geometrically inconsistent rawdata sets, and thus cannot meet the requirement. This paper proposes a practical material decomposition method to perform rawdata-based material decomposition in the case of inconsistent measurement. This method first yields the desired consistent rawdata sets from the measured inconsistent rawdata sets, and then employs rawdata-based technique to perform material decomposition and reconstruct material-selective images. The proposed method was evaluated by use of simulated FORBILD thorax phantom rawdata and dental CT rawdata, and simulation results indicate that this method can produce highly quantitative DSCT images in the case of inconsistent DSCT measurements.

Comparison of X-Ray Micro-Tomography Measurements of Densities and Porosity to Traditional Techniques for Carbon-Carbon Composites

DTIC Science & Technology

2009-02-26

equation, nitrogen , argon, and krypton are employed while for the D-R equation CO2 is usually used . With the adsorption techniques, certain assumption...structure to characterize it. Lastly, other liquids are used in a density gradient column [73-75] employing a sink-float technique in an attempt to...least 147 incremental intrusion pressures to 275 kPa, using nitrogen gas as the displacing medium. The sample is then loaded into the high-pressure

Preparation of Mentally Retarded Youth for Gainful Employment: A Study Sponsored Jointly by the U.S. Office of Education, the U.S. Office of Vocational Rehabilitation, and the Project on Technical Planning of the American Association on Mental Deficiency. Bulletin, 1959, No. 28

ERIC Educational Resources Information Center

Office of Education, US Department of Health, Education, and Welfare, 1959

1959-01-01

Public schools are finding that an educational program which serves as effective preparation for, and as an adequate transition to employment, may involve activities which have often been considered to be beyond the usual scope of school responsibility. Communities are finding that the task of preparing the mentally retarded for community living…

Improving Work Outcomes of Dysthymia (Persistent Depressive Disorder) in an Employed Population

PubMed Central

Adler, David A.; Lerner, Debra; Visco, Zachary L.; Greenhill, Annabel; Chang, Hong; Cymerman, Elina; Azocar, Francisca; Rogers, William H.

2015-01-01

Objective To test the effectiveness of a work-focused intervention (WFI) on the work outcomes of employed adults with dysthymia. Method This subgroup analysis from a randomized controlled trial compares an initial sample of 167 employees (age ≥ 45 years), screened for dysthymia using the PC-SAD without current major depressive disorder randomized to WFI (n=85) or usual care (UC) (n=82). Study sites included 19 employers and five additional organizations. Telephone-based WFI counseling (eight, twice monthly 50-minute sessions) provided work coaching and modification, care coordination and cognitive-behavioral therapy (CBT). Adjusted mixed effects models compared the WFI versus UC group pre-intervention to four-month post-intervention change in at-work limitations measured by the Work Limitations Questionnaire. Secondary outcome analysis compared the change in self-reported absences and depression symptom severity (PHQ-9 scores). Results Work productivity loss scores improved 43.0% in the WFI group vs. 4.8% in UC (difference in change P < 0.001). Absence days declined by 58.3% in WFI vs. 0.0% in UC (difference in change P = .09). Mean PHQ-9 depression symptom severity declined 44.2% in WFI vs. 5.3% in UC (difference in change P < 0.001). Conclusion At four months, the WFI was more effective than UC on two of the three outcomes. It could be an important mental and functional health improvement resource for the employed dysthymic population. PMID:25892151

The effectiveness of individual placement and support for people with mental illness new on social benefits: a study protocol

PubMed Central

2013-01-01

Background In Switzerland, people with a severe mental illness and unable to work receive disability benefits (‘IV-pension’). Once they are granted these benefits, the chances to regain competitive employment are usually small. However, previous studies have shown that individual placement and support (IPS) supports a successful reintegration into competitive employment. This study focuses on the integration of newly appointed IV-pensioners, who have received an IV-pension for less than a year. Method/design The present pilot project ZHEPP (Zürcher Eingliederungs-Pilot Projekt; engl.: Zurich integration pilot project) is a randomized controlled trial (RCT). The 250 participants will be randomized to either the intervention or the control group. The intervention group receives support of a job coach according to the approach of IPS. Participants in the control group do not receive IPS support. Participation takes a total of two years for each participant. Each group is interviewed every six months (T0-T4). A two-factor analysis of variance will be conducted with the two factors group (intervention versus control group) and outcome (employment yes/no). The main criterion of the two-factor analysis will be the number of competitive employment contracts in each group. Discussion This study will focus on the impact of IPS on new IV-pensioners and aims to identify predictors for a successful integration. Furthermore, we will examine the effect of IPS on stigma variables and recovery orientation. Trial registration ISRCTN54951166 PMID:23883137

Does Employer-Provided Health Insurance Constrain Labor Supply Adjustments to Health Shocks? New Evidence on Women Diagnosed with Breast Cancer

PubMed Central

Neumark, David; Barkowski, Scott

2013-01-01

Employment-contingent health insurance may create incentives for ill workers to remain employed at a sufficient level (usually full-time) to maintain access to health insurance coverage. We study employed married women, comparing the labor supply responses to new breast cancer diagnoses of women dependent on their own employment for health insurance with the responses of women who are less dependent on their own employment for health insurance, because of actual or potential access to health insurance through their spouse’s employer. We find evidence that women who depend on their own job for health insurance reduce their labor supply by less after a diagnosis of breast cancer. In the estimates that best control for unobservables associated with health insurance status, the hours reduction for women who continue to work is 8 to 11 percent smaller. Women’s subjective responses to questions about working more to maintain health insurance are consistent with the conclusions from observed behavior. PMID:23891911

5 CFR 831.1202 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... work in their usual employment. Disabled and disability mean unable or inability, because of disease or... of disability. Unless OPM exercises its choice of a physician, the cost of providing medical... make an evaluation. Medical condition means a health impairment resulting from a disease or injury...

5 CFR 831.1202 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... work in their usual employment. Disabled and disability mean unable or inability, because of disease or... of disability. Unless OPM exercises its choice of a physician, the cost of providing medical... make an evaluation. Medical condition means a health impairment resulting from a disease or injury...

5 CFR 831.1202 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... work in their usual employment. Disabled and disability mean unable or inability, because of disease or... of disability. Unless OPM exercises its choice of a physician, the cost of providing medical... make an evaluation. Medical condition means a health impairment resulting from a disease or injury...

Multi-Frequency Signal Detection Based on Frequency Exchange and Re-Scaling Stochastic Resonance and Its Application to Weak Fault Diagnosis

PubMed Central

Leng, Yonggang; Fan, Shengbo

2018-01-01

Mechanical fault diagnosis usually requires not only identification of the fault characteristic frequency, but also detection of its second and/or higher harmonics. However, it is difficult to detect a multi-frequency fault signal through the existing Stochastic Resonance (SR) methods, because the characteristic frequency of the fault signal as well as its second and higher harmonics frequencies tend to be large parameters. To solve the problem, this paper proposes a multi-frequency signal detection method based on Frequency Exchange and Re-scaling Stochastic Resonance (FERSR). In the method, frequency exchange is implemented using filtering technique and Single SideBand (SSB) modulation. This new method can overcome the limitation of "sampling ratio" which is the ratio of the sampling frequency to the frequency of target signal. It also ensures that the multi-frequency target signals can be processed to meet the small-parameter conditions. Simulation results demonstrate that the method shows good performance for detecting a multi-frequency signal with low sampling ratio. Two practical cases are employed to further validate the effectiveness and applicability of this method. PMID:29693577

Apparent negative mass in QCM sensors due to punctual rigid loading

NASA Astrophysics Data System (ADS)

Castro, P.; Resa, P.; Elvira, L.

2012-12-01

Quartz Crystal Microbalances (QCM) are highly sensitive piezoelectric sensors able to detect very small loads attached to them. These devices are widely employed in many applications including process control and industrial and environmental monitoring. Mass loading is usually related to frequency shift by the well-known Sauerbrey's equation, valid for thin rigid homogeneous films. However, a significant deviation from this equation can occur when the mass is not uniformly distributed over the surface. Whereas the effects of a thin film on a QCM have been thoroughly studied, there are relatively few results on punctual loads, even though particles are usually deposited randomly and non-uniformly on the resonator surface. In this work, we have studied the effect of punctual rigid loading on the resonant frequency shift of a QCM sensor, both experimentally and using finite element method (FEM). The FEM numerical analysis was done using COMSOL software, 3D modeling a linear elastic piezoelectric solid and introducing the properties of an AT-cut quartz crystal. It is shown that a punctual rigid mass deposition on the surface of a QCM sensor can lead to positive shifts of resonance frequency, contrary to Sauerbrey's equation.

Why Multivariate Methods Are Usually Vital in Research: Some Basic Concepts.

ERIC Educational Resources Information Center

Thompson, Bruce

The present paper suggests that multivariate methods ought to be used more frequently in behavioral research and explores the potential consequences of failing to use multivariate methods when these methods are appropriate. The paper explores in detail two reasons why multivariate methods are usually vital. The first is that they limit the…

[Fragments Woven into a Whole: A New Approach to the Diagnosis of Cancer through Mass Spectrometry and Machine-Learning].

PubMed

Takeda, Sen; Yoshimura, Kentaro; Tanabe, Kunio

2015-09-01

Conventionally, a definitive diagnosis of cancer is derived from histopathological diagnostics based on morphological criteria that are difficult to standardize on a quantifiable basis. On the other hand, while molecular tumor markers and blood biochemical profiles give quantitative values evaluated by objective criteria, these parameters are usually generated by deductive methods such as peak extraction. Therefore, some of the data that may contain useful information on specimens are discarded. To overcome the disadvantages of these methods, we have developed a new approach by employing both mass spectrometry and machine-learning for cancer diagnosis. Probe electrospray ionization (PESI) is a derivative of electrospray ionization that uses a fine acupuncture needle as a sample picker as well as an ion emitter for mass spectrometry. This method enables us to ionize very small tissue samples up to a few pico liters in the presence of physiological concentrations of inorganic salts, without the need for any sample pretreatment. Moreover, as this technique makes it possible to ionize all components with minimal suppression effects, we can retrieve much more molecular information from specimens. To make the most of data enriched with lipid compounds and substances with lower molecular weights such as carbohydrates, we employed machine-learning named the dual penalized logistic regression machine (dPLRM). This method is completely different from pattern-matching in that it discriminates categories by projecting the spectral data into a mathematical space with very high dimensions, where final judgment is made. We are now approaching the final clinical trial to validate the usefulness of our system.

Biologically plausible learning in neural networks: a lesson from bacterial chemotaxis.

PubMed

Shimansky, Yury P

2009-12-01

Learning processes in the brain are usually associated with plastic changes made to optimize the strength of connections between neurons. Although many details related to biophysical mechanisms of synaptic plasticity have been discovered, it is unclear how the concurrent performance of adaptive modifications in a huge number of spatial locations is organized to minimize a given objective function. Since direct experimental observation of even a relatively small subset of such changes is not feasible, computational modeling is an indispensable investigation tool for solving this problem. However, the conventional method of error back-propagation (EBP) employed for optimizing synaptic weights in artificial neural networks is not biologically plausible. This study based on computational experiments demonstrated that such optimization can be performed rather efficiently using the same general method that bacteria employ for moving closer to an attractant or away from a repellent. With regard to neural network optimization, this method consists of regulating the probability of an abrupt change in the direction of synaptic weight modification according to the temporal gradient of the objective function. Neural networks utilizing this method (regulation of modification probability, RMP) can be viewed as analogous to swimming in the multidimensional space of their parameters in the flow of biochemical agents carrying information about the optimality criterion. The efficiency of RMP is comparable to that of EBP, while RMP has several important advantages. Since the biological plausibility of RMP is beyond a reasonable doubt, the RMP concept provides a constructive framework for the experimental analysis of learning in natural neural networks.

Interdisciplinary team-based care for patients with chronic pain on long-term opioid treatment in primary care (PPACT) - Protocol for a pragmatic cluster randomized trial.

PubMed

DeBar, Lynn; Benes, Lindsay; Bonifay, Allison; Deyo, Richard A; Elder, Charles R; Keefe, Francis J; Leo, Michael C; McMullen, Carmit; Mayhew, Meghan; Owen-Smith, Ashli; Smith, David H; Trinacty, Connie M; Vollmer, William M

2018-04-01

Chronic pain is one of the most common, disabling, and expensive public health problems in the United States. Interdisciplinary pain management treatments that employ behavioral approaches have been successful in helping patients with chronic pain reduce symptoms and regain functioning. However, most patients lack access to such treatments. We are conducting a pragmatic clinical trial to test the hypothesis that patients who receive an interdisciplinary biopsychosocial intervention, the Pain Program for Active Coping and Training (PPACT), at their primary care clinic will have a greater reduction in pain impact in the year following than patients receiving usual care. This is an effectiveness-implementation hybrid pragmatic clinical trial in which we randomize clusters of primary care providers and their patients with chronic pain who are on long-term opioid therapy to 1) receive an interdisciplinary behavioral intervention in conjunction with their current health care or 2) continue with current health care services. Our primary outcome is pain impact (a composite of pain intensity and pain-related interference) measured using the PEG, a validated three-item assessment. Secondary outcomes include pain-related disability, patient satisfaction, opioids dispensed and health care utilization. An economic evaluation assesses the resources and costs necessary to deliver the intervention and its cost-effectiveness compared with usual care. A formative evaluation employs mixed methods to understand the context for implementation in the participating health care systems. This trial will inform the feasibility of implementing interdisciplinary behavioral approaches to pain management in the primary care setting, potentially providing a more effective, safer, and more satisfactory alternative to opioid-based chronic pain treatment. Clinical Trials Registration Number: NCT02113592. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Drift-Free Position Estimation of Periodic or Quasi-Periodic Motion Using Inertial Sensors

PubMed Central

Latt, Win Tun; Veluvolu, Kalyana Chakravarthy; Ang, Wei Tech

2011-01-01

Position sensing with inertial sensors such as accelerometers and gyroscopes usually requires other aided sensors or prior knowledge of motion characteristics to remove position drift resulting from integration of acceleration or velocity so as to obtain accurate position estimation. A method based on analytical integration has previously been developed to obtain accurate position estimate of periodic or quasi-periodic motion from inertial sensors using prior knowledge of the motion but without using aided sensors. In this paper, a new method is proposed which employs linear filtering stage coupled with adaptive filtering stage to remove drift and attenuation. The prior knowledge of the motion the proposed method requires is only approximate band of frequencies of the motion. Existing adaptive filtering methods based on Fourier series such as weighted-frequency Fourier linear combiner (WFLC), and band-limited multiple Fourier linear combiner (BMFLC) are modified to combine with the proposed method. To validate and compare the performance of the proposed method with the method based on analytical integration, simulation study is performed using periodic signals as well as real physiological tremor data, and real-time experiments are conducted using an ADXL-203 accelerometer. Results demonstrate that the performance of the proposed method outperforms the existing analytical integration method. PMID:22163935

Empowerment Evaluation: A Form of Self-Evaluation.

ERIC Educational Resources Information Center

Fetterman, David M.

Empowerment evaluation is an innovative approach that uses evaluation concepts and techniques to foster improvement and self-determination. Empowerment evaluation employs qualitative and quantitative methodologies. Although it can be applied to individuals and organizations, the usual focus is on programs. The value orientation of empowerment…

Hypnosis and Education.

ERIC Educational Resources Information Center

Dale, Ralph Alan

Hypnosis is a state of mind which manifests a high degree of suggestibility. Advertising, political campaigning, and religious contemplation are all areas in which hypotism is employed, usually without knowledge on the part of either the "hypnotist" or the subject. Because of its association with entertainment, magic, manipulation, and…

5 CFR 351.203 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... competitive levels within the pay band, including (as appropriate) any applicable locality payment authorized... and forth daily to their usual employment. Modal rating is the summary rating level assigned most frequently among the actual ratings of record that are: (1) Assigned under the summary level pattern that...

Dissociation of heavy quarkonium in hot QCD medium in a quasiparticle model

NASA Astrophysics Data System (ADS)

Agotiya, Vineet Kumar; Chandra, Vinod; Jamal, M. Yousuf; Nilima, Indrani

2016-11-01

Following a recent work on the effective description of the equations of state for hot QCD obtained from a hard thermal loop expression for the gluon self-energy, in terms of the quasigluons and quasiquarks and antiquarks with respective effective fugacities, the dissociation process of heavy quarkonium in hot QCD medium has been investigated. This has been done by investigating the medium modification to a heavy quark potential. The medium-modified potential has a quite different form (a long-range Coulomb tail in addition to the usual Yukawa term) in contrast to the usual picture of Debye screening. The flavor dependence binding energies of the heavy quarkonia states and the dissociation temperature have been obtained by employing the Debye mass for pure gluonic and full QCD case computed employing the quasiparticle picture. Thus, estimated dissociation patterns of the charmonium and bottomonium states, considering Debye mass from different approaches in the pure gluonic case and full QCD, have shown good agreement with the other potential model studies.

Design of a trial-based economic evaluation on the cost-effectiveness of employability interventions among work disabled employees or employees at risk of work disability: The CASE-study

PubMed Central

2012-01-01

Background In the Netherlands, absenteeism and reduced productivity due to work disability lead to high yearly costs reaching almost 5% of the gross national product. To reduce the economic burden of sick leave and reduced productivity, different employability interventions for work-disabled employees or employees at risk of work disability have been developed. Within this study, called 'CASE-study' (Cost-effectiveness Analysis of Sustainable Employability), five different employability interventions directed at work disabled employees with divergent health complaints will be analysed on their effectiveness and cost-effectiveness. This paper describes a consistent and transparent methodological design to do so. Methods/design Per employability intervention 142 participants are needed whereof approximately 66 participants receiving the intervention will be compared with 66 participants receiving usual care. Based on the intervention-specific characteristics, a randomized control trial or a quasi-experiment with match-criteria will be conducted. Notwithstanding the study design, eligible participants will be employees aged 18 to 63, working at least 12 h per week, and at risk of work disability, or already work-disabled due to medical restrictions. The primary outcome will be the duration of sick leave. Secondary outcomes are health status and quality of life. Outcomes will be assessed at baseline and then 6, 12 and 18 months later. Economic costs will consist of healthcare costs and cost of lost production due to work disability, and will be evaluated from a societal perspective. Discussion The CASE-study is the first to conduct economic evaluations of multiple different employability interventions based on a similar methodological framework. The cost-effectiveness results for every employability intervention will be published in 2014, but the methods, strengths and weaknesses of the study protocol are discussed in this paper. To contribute to treatment options in occupational health practice and enable the development of guidelines on how to conduct economic evaluation better suited to this field; this paper provides an important first step. Trial registration Four trials involved in the CASE-study are registered with the Netherlands Trial Registry: Care for Work (NTR2886), Health and Motion (NTR3111), Guidance to Excel in Return to Work (NTR3151), Care for Companies/Second Care (NTR3136). PMID:22257557

Body mass index and employment status: A new look.

PubMed

Kinge, Jonas Minet

2016-09-01

Earlier literature has usually modelled the impact of obesity on employment status as a binary choice (employed, yes/no). I provide new evidence on the impact of obesity on employment status by treating the dependent variable as a as a multinomial choice variable. Using data from a representative English survey, with measured height and weight on parents and children, I define employment status as one of four: working; looking for paid work; permanently not working due to disability; and, looking after home or family. I use a multinomial logit model controlling for a set of covariates. I also run instrumental variable models, instrumenting for Body Mass Index (BMI) based on genetic variation in weight. I find that BMI and obesity significantly increase the probability of "not working due to disability". The results for the other employment outcomes are less clear. My findings also indicate that BMI affects employment through its effect on health. Factors other than health may be less important in explaining the impact of BMI/obesity on employment. Copyright © 2016 Elsevier B.V. All rights reserved.

Next-generation audit and feedback for inpatient quality improvement using electronic health record data: a cluster randomised controlled trial.

PubMed

Patel, Sajan; Rajkomar, Alvin; Harrison, James D; Prasad, Priya A; Valencia, Victoria; Ranji, Sumant R; Mourad, Michelle

2018-03-05

Audit and feedback improves clinical care by highlighting the gap between current and ideal practice. We combined best practices of audit and feedback with continuously generated electronic health record data to improve performance on quality metrics in an inpatient setting. We conducted a cluster randomised control trial comparing intensive audit and feedback with usual audit and feedback from February 2016 to June 2016. The study subjects were internal medicine teams on the teaching service at an urban tertiary care hospital. Teams in the intensive feedback arm received access to a daily-updated team-based data dashboard as well as weekly inperson review of performance data ('STAT rounds'). The usual feedback arm received ongoing twice-monthly emails with graphical depictions of team performance on selected quality metrics. The primary outcome was performance on a composite discharge metric (Discharge Mix Index, 'DMI'). A washout period occurred at the end of the trial (from May through June 2016) during which STAT rounds were removed from the intensive feedback arm. A total of 40 medicine teams participated in the trial. During the intervention period, the primary outcome of completion of the DMI was achieved on 79.3% (426/537) of patients in the intervention group compared with 63.2% (326/516) in the control group (P<0.0001). During the washout period, there was no significant difference in performance between the intensive and usual feedback groups. Intensive audit and feedback using timely data and STAT rounds significantly increased performance on a composite discharge metric compared with usual feedback. With the cessation of STAT rounds, performance between the intensive and usual feedback groups did not differ significantly, highlighting the importance of feedback delivery on effecting change. The trial was registered with ClinicalTrials.gov (NCT02593253). © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Educational video to improve CPAP use in patients with obstructive sleep apnoea at risk for poor adherence: a randomised controlled trial.

PubMed

Guralnick, Amy S; Balachandran, Jay S; Szutenbach, Shane; Adley, Kevin; Emami, Leila; Mohammadi, Meelad; Farnan, Jeanne M; Arora, Vineet M; Mokhlesi, Babak

2017-12-01

Suboptimal adherence to CPAP limits its clinical effectiveness in patients with obstructive sleep apnoea (OSA). Although rigorous behavioural interventions improve CPAP adherence, their labour-intensive nature has limited widespread implementation. Moreover, these interventions have not been tested in patients at risk of poor CPAP adherence. Our objective was to determine whether an educational video will improve CPAP adherence in patients at risk of poor CPAP adherence. Patients referred by clinicians without sleep medicine expertise to an urban sleep laboratory that serves predominantly minority population were randomised to view an educational video about OSA and CPAP therapy before the polysomnogram, or to usual care. The primary outcome was CPAP adherence during the first 30 days of therapy. Secondary outcomes were show rates to sleep clinic (attended appointment) and 30-day CPAP adherence after the sleep clinic visit date. A total of 212 patients met the eligibility criteria and were randomised to video education (n=99) or to usual care (n=113). There were no differences in CPAP adherence at 30 days (3.3, 95% CI 2.8 to 3.8 hours/day video education; vs 3.5, 95% CI 3.1 to 4.0 hours/day usual care; p=0.44) or during the 30 days after sleep clinic visit. Sleep clinic show rate was 54% in the video education group and 59% in the usual care group (p=0.41). CPAP adherence, however, significantly worsened in patients who did not show up to the sleep clinic. In patients at risk for poor CPAP adherence, an educational video did not improve CPAP adherence or show rates to sleep clinic compared with usual care. ClinicalTrials.gov Identifier: NCT02553694. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Support vector machine based classification of fast Fourier transform spectroscopy of proteins

NASA Astrophysics Data System (ADS)

Lazarevic, Aleksandar; Pokrajac, Dragoljub; Marcano, Aristides; Melikechi, Noureddine

2009-02-01

Fast Fourier transform spectroscopy has proved to be a powerful method for study of the secondary structure of proteins since peak positions and their relative amplitude are affected by the number of hydrogen bridges that sustain this secondary structure. However, to our best knowledge, the method has not been used yet for identification of proteins within a complex matrix like a blood sample. The principal reason is the apparent similarity of protein infrared spectra with actual differences usually masked by the solvent contribution and other interactions. In this paper, we propose a novel machine learning based method that uses protein spectra for classification and identification of such proteins within a given sample. The proposed method uses principal component analysis (PCA) to identify most important linear combinations of original spectral components and then employs support vector machine (SVM) classification model applied on such identified combinations to categorize proteins into one of given groups. Our experiments have been performed on the set of four different proteins, namely: Bovine Serum Albumin, Leptin, Insulin-like Growth Factor 2 and Osteopontin. Our proposed method of applying principal component analysis along with support vector machines exhibits excellent classification accuracy when identifying proteins using their infrared spectra.

Geologic Carbon Sequestration Leakage Detection: A Physics-Guided Machine Learning Approach

NASA Astrophysics Data System (ADS)

Lin, Y.; Harp, D. R.; Chen, B.; Pawar, R.

2017-12-01

One of the risks of large-scale geologic carbon sequestration is the potential migration of fluids out of the storage formations. Accurate and fast detection of this fluids migration is not only important but also challenging, due to the large subsurface uncertainty and complex governing physics. Traditional leakage detection and monitoring techniques rely on geophysical observations including pressure. However, the resulting accuracy of these methods is limited because of indirect information they provide requiring expert interpretation, therefore yielding in-accurate estimates of leakage rates and locations. In this work, we develop a novel machine-learning technique based on support vector regression to effectively and efficiently predict the leakage locations and leakage rates based on limited number of pressure observations. Compared to the conventional data-driven approaches, which can be usually seem as a "black box" procedure, we develop a physics-guided machine learning method to incorporate the governing physics into the learning procedure. To validate the performance of our proposed leakage detection method, we employ our method to both 2D and 3D synthetic subsurface models. Our novel CO2 leakage detection method has shown high detection accuracy in the example problems.

Two methods of Haustral fold detection from computed tomographic virtual colonoscopy images

NASA Astrophysics Data System (ADS)

Chowdhury, Ananda S.; Tan, Sovira; Yao, Jianhua; Linguraru, Marius G.; Summers, Ronald M.

2009-02-01

Virtual colonoscopy (VC) has gained popularity as a new colon diagnostic method over the last decade. VC is a new, less invasive alternative to the usually practiced optical colonoscopy for colorectal polyp and cancer screening, the second major cause of cancer related deaths in industrial nations. Haustral (colonic) folds serve as important landmarks for virtual endoscopic navigation in the existing computer-aided-diagnosis (CAD) system. In this paper, we propose and compare two different methods of haustral fold detection from volumetric computed tomographic virtual colonoscopy images. The colon lumen is segmented from the input using modified region growing and fuzzy connectedness. The first method for fold detection uses a level set that evolves on a mesh representation of the colon surface. The colon surface is obtained from the segmented colon lumen using the Marching Cubes algorithm. The second method for fold detection, based on a combination of heat diffusion and fuzzy c-means algorithm, is employed on the segmented colon volume. Folds obtained on the colon volume using this method are then transferred to the corresponding colon surface. After experimentation with different datasets, results are found to be promising. The results also demonstrate that the first method has a tendency of slight under-segmentation while the second method tends to slightly over-segment the folds.

Current levels of suppression of waterhyacinth in Florida by classical biological control agents

USDA-ARS?s Scientific Manuscript database

Waterhyacinth, Eichhornia crassipes, has been a global target for classical biological control efforts for decades. In Florida, herbicides are the primary tactic employed, usually without regard for the activities of the three biological control agents introduced intentionally during the 1970's, na...

Azo dyes and related compounds as important aquatic contaminants: a ten-year case study

EPA Science Inventory

Mutagenicity has been found in several aquatic systems in the world; however, this activity usually is not associated with any of the compounds that are currently regulated. Attempting to identify these hazardous compounds, an integrated study was conducted, employing several dif...

CAREER GUIDE FOR DEMAND OCCUPATIONS.

ERIC Educational Resources Information Center

LEE, E.R.; WELCH, JOHN L.

THIS PUBLICATION UPDATES THE "CAREER GUIDE FOR DEMAND OCCUPATIONS" PUBLISHED IN 1959 AND PROVIDES COUNSELORS WITH INFORMATION ABOUT OCCUPATIONS IN DEMAND IN MANY AREAS WHICH REQUIRE PREEMPLOYMENT TRAINING. IT PRESENTS, IN COLUMN FORM, THE EDUCATION AND OTHER TRAINING USUALLY REQUIRED BY EMPLOYERS, HIGH SCHOOL SUBJECTS OF PARTICULAR PERTINENCE TO…

THE LOCAL EDUCATION ASSOCIATION AND GRIEVANCE ADJUSTMENT.

ERIC Educational Resources Information Center

GISRIEL, CORNELIUS E.; AND OTHERS

A GRIEVANCE IS A CHARGE THAT A POLICY AFFECTING WORKING CONDITIONS IS INADEQUATE OR HAS BEEN VIOLATED. TEACHER GRIEVANCE COMPLAINTS ARE PRIMARILY CONCERNED WITH TEACHING LOAD, CLASS SIZE, PROMOTION, FACILITIES, SALARIES, AND TEACHER EVALUATION. GRIEVANCES USUALLY OCCUR IN A STRATIFIED EMPLOYMENT SETTING AND RESULT FROM POOR FORMULATION OR…

Optimal least-squares finite element method for elliptic problems

NASA Technical Reports Server (NTRS)

Jiang, Bo-Nan; Povinelli, Louis A.

1991-01-01

An optimal least squares finite element method is proposed for two dimensional and three dimensional elliptic problems and its advantages are discussed over the mixed Galerkin method and the usual least squares finite element method. In the usual least squares finite element method, the second order equation (-Delta x (Delta u) + u = f) is recast as a first order system (-Delta x p + u = f, Delta u - p = 0). The error analysis and numerical experiment show that, in this usual least squares finite element method, the rate of convergence for flux p is one order lower than optimal. In order to get an optimal least squares method, the irrotationality Delta x p = 0 should be included in the first order system.

Influence of firm size on the competencies required to management engineers in the Jordanian telecommunications sector

NASA Astrophysics Data System (ADS)

Conchado Peiró, Andrea; Bas Cerdá, María del Carmen; Gharaibeh, Khaled M.; Kaylani, Hazem

2017-09-01

The objective of this study is to identify the competencies required to achieve success in the transition from higher education to the labour market based on the perceptions of employers. This paper analyses the assessments made by a group of engineering company employers. An item-battery of 20 competencies was grouped into 3 dimensions by using factor analysis. Subsequently, respondents' scores were also clustered into three groups and characterised through contingency tables. The competencies demanded by employers were grouped into business and finance, problem-solving and strategic planning. Significant differences were found between responses from employers working in medium and small companies, who placed more importance on competencies related to problem-solving and strategic planning, and employers in big companies, who were more concerned about the difficulties of finding well-trained graduates. The findings from this paper have important implications for research in the areas of higher education and organisations that usually employ graduate engineers.

Control-enhanced multiparameter quantum estimation

NASA Astrophysics Data System (ADS)

Liu, Jing; Yuan, Haidong

2017-10-01

Most studies in multiparameter estimation assume the dynamics is fixed and focus on identifying the optimal probe state and the optimal measurements. In practice, however, controls are usually available to alter the dynamics, which provides another degree of freedom. In this paper we employ optimal control methods, particularly the gradient ascent pulse engineering (GRAPE), to design optimal controls for the improvement of the precision limit in multiparameter estimation. We show that the controlled schemes are not only capable to provide a higher precision limit, but also have a higher stability to the inaccuracy of the time point performing the measurements. This high time stability will benefit the practical metrology, where it is hard to perform the measurement at a very accurate time point due to the response time of the measurement apparatus.

Lattice Boltzmann Simulation of Electroosmotic Micromixing by Heterogeneous Surface Charge

NASA Astrophysics Data System (ADS)

Tang, G. H.; Wang, F. F.; Tao, W. Q.

Microelectroosmotic flow is usually restricted to low Reynolds number regime, and mixing in these microfluidic systems becomes problematic due to the negligible inertial effects. To gain an improved understanding of mixing enhancement in microchannels patterned with heterogeneous surface charge, the lattice Boltzmann method has been employed to obtain the electric potential distribution in the electrolyte, the flow field, and the species concentration distribution, respectively. The simulation results show that heterogeneous surfaces can significantly disturb the streamlines leading to apparently substantial improvements in mixing. However, the introduction of such a feature can reduce the mass flow rate in the channel. The reduction in flow rate effectively prolongs the available mixing time when the flow passes through the channel and the observed mixing enhancement by heterogeneous surfaces partly results from longer mixing time.

Chiral d -wave superconductivity in a triangular surface lattice mediated by long-range interaction

NASA Astrophysics Data System (ADS)

Cao, Xiaodong; Ayral, Thomas; Zhong, Zhicheng; Parcollet, Olivier; Manske, Dirk; Hansmann, Philipp

2018-04-01

Adatom systems on the Si(111) surface have recently attracted an increasing attention as strongly correlated systems with a rich phase diagram. We study these materials by a single band model on the triangular lattice, including 1 /r long-range interaction. Employing the recently proposed TRILEX method, we find an unconventional superconducting phase of chiral d -wave symmetry in hole-doped systems. Contrary to usual scenarios where charge and spin fluctuations are seen to compete, here the superconductivity is driven simultaneously by both charge and spin fluctuations and crucially relies on the presence of the long-range tail of the interaction. We provide an analysis of the relevant collective bosonic modes and predict how a cumulative charge and spin paring mechanism leads to superconductivity in doped silicon adatom materials.

Multi-model ensemble hydrological simulation using a BP Neural Network for the upper Yalongjiang River Basin, China

NASA Astrophysics Data System (ADS)

Li, Zhanjie; Yu, Jingshan; Xu, Xinyi; Sun, Wenchao; Pang, Bo; Yue, Jiajia

2018-06-01

Hydrological models are important and effective tools for detecting complex hydrological processes. Different models have different strengths when capturing the various aspects of hydrological processes. Relying on a single model usually leads to simulation uncertainties. Ensemble approaches, based on multi-model hydrological simulations, can improve application performance over single models. In this study, the upper Yalongjiang River Basin was selected for a case study. Three commonly used hydrological models (SWAT, VIC, and BTOPMC) were selected and used for independent simulations with the same input and initial values. Then, the BP neural network method was employed to combine the results from the three models. The results show that the accuracy of BP ensemble simulation is better than that of the single models.

Composing compound libraries for hit discovery--rationality-driven preselection or random choice by structural diversity?

PubMed

Weidel, Elisabeth; Negri, Matthias; Empting, Martin; Hinsberger, Stefan; Hartmann, Rolf W

2014-01-01

In order to identify new scaffolds for drug discovery, surface plasmon resonance is frequently used to screen structurally diverse libraries. Usually, hit rates are low and identification processes are time consuming. Hence, approaches which improve hit rates and, thus, reduce the library size are required. In this work, we studied three often used strategies for their applicability to identify inhibitors of PqsD. In two of them, target-specific aspects like inhibition of a homologous protein or predicted binding determined by virtual screening were used for compound preselection. Finally, a fragment library, covering a large chemical space, was screened and served as comparison. Indeed, higher hit rates were observed for methods employing preselected libraries indicating that target-oriented compound selection provides a time-effective alternative.

A teleconference with three-dimensional surgical video presentation on the 'usual' Internet.

PubMed

Obuchi, Toshiro; Moroga, Toshihiko; Nakamura, Hiroshige; Shima, Hiroji; Iwasaki, Akinori

2015-03-01

Endoscopic surgery employing three-dimensional (3D) video images, such as a robotic surgery, has recently become common. However, the number of opportunities to watch such actual 3D videos is still limited due to many technical difficulties associated with showing 3D videos in front of an audience. A teleconference with 3D video presentations of robotic surgeries was held between our institution and a distant institution using a commercially available telecommunication appliance on the 'usual' Internet. Although purpose-built video displays and 3D glasses were necessary, no technical problems occurred during the presentation and discussion. This high-definition 3D telecommunication system can be applied to discussions about and education on 3D endoscopic surgeries for many surgeons, even in distant places, without difficulty over the usual Internet connection.

Prediction of the Possibility a Right-Turn Driving Behavior at Intersection Leads to an Accident by Detecting Deviation of the Situation from Usual when the Behavior is Observed

NASA Astrophysics Data System (ADS)

Hayashi, Toshinori; Yamada, Keiichi

Deviation of driving behavior from usual could be a sign of human error that increases the risk of traffic accidents. This paper proposes a novel method for predicting the possibility a driving behavior leads to an accident from the information on the driving behavior and the situation. In a previous work, a method of predicting the possibility by detecting the deviation of driving behavior from usual one in that situation has been proposed. In contrast, the method proposed in this paper predicts the possibility by detecting the deviation of the situation from usual one when the behavior is observed. An advantage of the proposed method is the number of the required models is independent of the variety of the situations. The method was applied to a problem of predicting accidents by right-turn driving behavior at an intersection, and the performance of the method was evaluated by experiments on a driving simulator.

Impact of primary care depression intervention on employment and workplace conflict outcomes: is value added?

PubMed

Smith, Jeffrey L; Rost, Kathryn M; Nutting, Paul A; Libby, Anne M; Elliott, Carl E; Pyne, Jeffrey M

2002-03-01

Depression causes significant functional impairment in sufferers and often leads to adverse employment outcomes for working individuals. Recovery from depression has been associated with better employment outcomes at one year. The study s goals were to assess a primary care depression intervention s impact on subsequent employment and workplace conflict outcomes in employed patients with depression. In 1996-1997, the study enrolled 262 employed patients with depression from twelve primary care practices located across ten U.S. states; 219 (84%) of the patients were followed at one year. Intent-to-treat analyses assessing intervention effects on subsequent employment and workplace conflict were conducted using logistic regression models controlling for individual clinical and sociodemographic characteristics, job classification and local employment conditions. To meet criteria for subsequent employment, persons working full-time at baseline had to report they were working full-time at follow-up and persons working part-time at baseline had to report working part-/full-time at follow-up. Workplace conflict was measured by asking patients employed at follow-up whether, in the past year, they had arguments or other difficulties with people at work . Findings showed that 92.1% of intervention patients met criteria for subsequent employment at one year, versus 82.0% of usual care patients (c2=4.42, p=.04). Intervention patients were less likely than usual care patients to report workplace conflict in the year following baseline (8.1% vs. 18.9%, respectively; c2=4.11; p=.04). The intervention s effect on subsequent employment was not mediated by its effect on workplace conflict. The intervention significantly improved employment outcomes and reduced workplace conflict in depressed, employed persons at one year. Economic implications for employers related to reduced turnover costs, for workers related to retained earnings, and for governments related to reduced unemployment expenditures and increased tax receipts may be considerable. Although similar primary care depression interventions have been shown to produce comparable effects on subsequent employment at one year, replications in larger samples of depressed, employed patients in different economic climates may be necessary to increase the generalizability and precision of estimates. Primary care interventions that enhance depression treatment and improve clinical outcomes can contribute meaningful added value to society by improving employment and workplace outcomes. Federal/state governments may realize economic benefits from reduced unemployment expenditures and increased tax receipts should primary care depression interventions that improve employment outcomes be broadly disseminated. Policy initiatives to increase the dissemination of such interventions may be an innovative approach for improving labor force participation by depressed individuals. Formal cost-benefit analyses are needed to explore whether economic benefits to societal stakeholders from these and other labor outcomes equal or exceed the incremental costs of disseminating similar primary care interventions nationally. Researchers in other nations may wish to consider investigating the impact primary care depression interventions might have on employment and workplace outcomes in their countries.

Cost-effectiveness of a preferred intensity exercise programme for young people with depression compared with treatment as usual: an economic evaluation alongside a clinical trial in the UK.

PubMed

Turner, David; Carter, Tim; Sach, Tracey; Guo, Boliang; Callaghan, Patrick

2017-11-26

To assess the cost-effectiveness of preferred intensity exercise programme for young people with depression compared with a treatment as usual control group. A 'within trial' cost-effectiveness and cost-utility analysis conducted alongside a randomised controlled trial. The perspective of the analysis was the UK National Health Service and social services. The intervention was provided in a community leisure centre setting. 86 young people aged 14-17 years attending Tier 2 and Tier 3 CAMHS (Child and Adolescent Mental Health Services) outpatient services presenting with depression. The intervention comprised 12 separate sessions of circuit training over a 6-week period. Sessions were supervised by a qualified exercise therapist. Participants also received treatment as usual. The comparator group received treatment as usual. We found improvements in the Children's Depression Inventory-2 (CDI-2) and estimated cost-effectiveness at £61 per point improvement in CDI-2 for the exercise group compared with control. We found no evidence that the exercise intervention led to differences in quality-adjusted life years (QALY). QALYs were estimated using the EQ-5D-5L (5-level version of EuroQol-5 dimension). There is evidence that exercise can be an effective intervention for adolescents with depression and the current study shows that preferred intensity exercise could also represent a cost-effective intervention in terms of the CDI-2. NCT01474837. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Preliminary efficacy of service dogs as a complementary treatment for posttraumatic stress disorder in military members and veterans.

PubMed

O'Haire, Marguerite E; Rodriguez, Kerri E

2018-02-01

Psychiatric service dogs are an emerging complementary treatment for military members and veterans with posttraumatic stress disorder (PTSD). Yet despite anecdotal accounts of their value, there is a lack of empirical research on their efficacy. The current proof-of-concept study assessed the effects of this practice. A nonrandomized efficacy trial was conducted with 141 post-9/11 military members and veterans with PTSD to compare usual care alone (n = 66) with usual care plus a trained service dog (n = 75). The primary outcome was longitudinal change on The PTSD Checklist (PCL; Weathers, Litz, Herman, Huska, & Keane, 1993), including data points from a cross-sectional assessment and a longitudinal record review. Secondary outcomes included cross-sectional differences in depression, quality of life, and social and work functioning. Mixed-model analyses revealed clinically significant reductions in PTSD symptoms from baseline following the receipt of a service dog, but not while receiving usual care alone. Though clinically meaningful, average reductions were not below the diagnostic cutoff on the PCL. Regression analyses revealed significant differences with medium to large effect sizes among those with service dogs compared with those on the waitlist, including lower depression, higher quality of life, and higher social functioning. There were no differences in employment status, but there was lower absenteeism because of health among those who were employed. The addition of trained service dogs to usual care may confer clinically meaningful improvements in PTSD symptomology for military members and veterans with PTSD, though it does not appear to be associated with a loss of diagnosis. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Narrow field electromagnetic sensor system and method

DOEpatents

McEwan, Thomas E.

1996-01-01

A narrow field electromagnetic sensor system and method of sensing a characteristic of an object provide the capability to realize a characteristic of an object such as density, thickness, or presence, for any desired coordinate position on the object. One application is imaging. The sensor can also be used as an obstruction detector or an electronic trip wire with a narrow field without the disadvantages of impaired performance when exposed to dirt, snow, rain, or sunlight. The sensor employs a transmitter for transmitting a sequence of electromagnetic signals in response to a transmit timing signal, a receiver for sampling only the initial direct RF path of the electromagnetic signal while excluding all other electromagnetic signals in response to a receive timing signal, and a signal processor for processing the sampled direct RF path electromagnetic signal and providing an indication of the characteristic of an object. Usually, the electromagnetic signal is a short RF burst and the obstruction must provide a substantially complete eclipse of the direct RF path. By employing time-of-flight techniques, a timing circuit controls the receiver to sample only the initial direct RF path of the electromagnetic signal while not sampling indirect path electromagnetic signals. The sensor system also incorporates circuitry for ultra-wideband spread spectrum operation that reduces interference to and from other RF services while allowing co-location of multiple electronic sensors without the need for frequency assignments.

Narrow field electromagnetic sensor system and method

DOEpatents

McEwan, T.E.

1996-11-19

A narrow field electromagnetic sensor system and method of sensing a characteristic of an object provide the capability to realize a characteristic of an object such as density, thickness, or presence, for any desired coordinate position on the object. One application is imaging. The sensor can also be used as an obstruction detector or an electronic trip wire with a narrow field without the disadvantages of impaired performance when exposed to dirt, snow, rain, or sunlight. The sensor employs a transmitter for transmitting a sequence of electromagnetic signals in response to a transmit timing signal, a receiver for sampling only the initial direct RF path of the electromagnetic signal while excluding all other electromagnetic signals in response to a receive timing signal, and a signal processor for processing the sampled direct RF path electromagnetic signal and providing an indication of the characteristic of an object. Usually, the electromagnetic signal is a short RF burst and the obstruction must provide a substantially complete eclipse of the direct RF path. By employing time-of-flight techniques, a timing circuit controls the receiver to sample only the initial direct RF path of the electromagnetic signal while not sampling indirect path electromagnetic signals. The sensor system also incorporates circuitry for ultra-wideband spread spectrum operation that reduces interference to and from other RF services while allowing co-location of multiple electronic sensors without the need for frequency assignments. 12 figs.

Use of a large time-compensated scintillation detector in neutron time-of-flight measurements

DOEpatents

Goodman, Charles D.

1979-01-01

A scintillator for neutron time-of-flight measurements is positioned at a desired angle with respect to the neutron beam, and as a function of the energy thereof, such that the sum of the transit times of the neutrons and photons in the scintillator are substantially independent of the points of scintillations within the scintillator. Extrapolated zero timing is employed rather than the usual constant fraction timing. As a result, a substantially larger scintillator can be employed that substantially increases the data rate and shortens the experiment time.

Happiness and job satisfaction in a casino-dominated economy.

PubMed

Zeng, Zhonglu; Forrest, David; McHale, Ian G

2013-09-01

Proposals for casinos usually focus on numbers of jobs without considering their quality. We surveyed 1,506 Macau residents, modelling happiness and job satisfaction. Being employed is shown to be important for 'happiness'. But job attributes also matter, confirming the work domain as influential on wellbeing. Casino employees report similar happiness as others. However, despite relatively high pay, they report low overall job satisfaction. The particular aspects of their jobs that they rated generally negatively tended to be those inherent in casino employment rather than easily modifiable by managerial action.

Tips for a physician in getting the right job, part XXII: more on contract negotiations.

PubMed

Harolds, Jay A

2015-05-01

This article discusses contract negotiations on multiple issues including bonuses, restrictive covenants, and fringe benefits. However, the job seeker should be very careful about attempting to negotiate what is already a very good contract if he/she does not have alternative employment opportunities or is not a very strong candidate. In addition, often more important than the contract is the character of the people the job seeker would be working for. If the employers do not seem to be honorable, it is usually best to look elsewhere.

Improved osseointegration properties of hierarchical microtopographic/nanotopographic coatings fabricated on titanium implants.

PubMed

Zemtsova, Elena G; Yudintceva, Natalia M; Morozov, Pavel E; Valiev, Ruslan Z; Smirnov, Vladimir M; Shevtsov, Maxim A

2018-01-01

Titanium (Ti) implants are extensively used in reconstructive surgery and orthopedics. However, the intrinsic inertness of untreated Ti implants usually results in insufficient osseointegration. In order to improve the osteoconductivity properties of the implants, they are coated with hierarchical microtopographic/nanotopographic coatings employing the method of molecular layering of atomic layer deposition (ML-ALD). The analysis of the fabricated nanostructured relief employing scanning electron microscopy, atomic force microscopy, and electron spectroscopy for chemical analysis clearly demonstrated the formation of the nanotopographic (<100 nm) and microtopographic (0.1-0.5 μm) titano-organic structures on the surface of the nanograined Ti implants. Subsequent coincubation of the MC3T3-E1 mouse osteoblasts on the microtopographic/nanotopographic surface of the implants resulted in enhanced osteogenic cell differentiation (the production of alkaline phosphatase, osteopontin, and osteocalcin). In vivo assessment of the osseointegrative properties of the microtopographically/nanotopographically coated implants in a model of below-knee amputation in New Zealand rabbits demonstrated enhanced new bone formation in the zone of the bone-implant contact (as measured by X-ray study) and increased osseointegration strength (removal torque measurements). The fabrication of the hierarchical microtopographic/nanotopographic coatings on the nanograined Ti implants significantly improves the osseointegrative properties of the intraosseous Ti implants. This effect could be employed in both translational and clinical studies in orthopedic and reconstructive surgery.

Unravelling the effects of mobile phase additives in supercritical fluid chromatography. Part I: Polarity and acidity of the mobile phase.

PubMed

West, Caroline; Melin, Jodie; Ansouri, Hassna; Mengue Metogo, Maïly

2017-04-07

The mobile phases employed in current supercritical fluid chromatography (SFC) are usually composed of a mixture of pressurized carbon dioxide and a co-solvent. The co-solvent is most often an alcohol and may contain a third component in small proportions, called an additive (acid, base or salt). The polarity of such mobile phase compositions is here re-evaluated with a solvatochromic dye (Nile Red), particularly to assess the contribution of additives. It appears that additives, when employed in usual concentration range (0.1% or 20mM) do not modify the polarity in the immediate environment of the probe. In addition, the combination of carbon dioxide and an alcohol is known to form alkoxylcarbonic acid, supposedly conferring some acidic character to SFC mobile phases. Direct measurements of the apparent pH are impossible, but colour indicators of pH can be used to define the range of apparent pH provided by carbon dioxide-alcohol mixtures, with or without additives. Five colour indicators (Thymol Blue, Bromocresol Green, Methyl Red, Bromocresol Purple, and Bromothymol Blue) were selected to provide a wide range of aqueous pK a values (from 1.7 to 8.9). UV-vis absorption spectra measured in liquid phases of controlled pH were compared to those measured with a diode-array detector employed in SFC, with the help of chemometric methods. Based on these observations, it is concluded that the apparent pH range in carbon dioxide-methanol mobile phases is close to 5. Increasing the proportion of methanol (in the course of a gradient elution for instance) causes decreasing apparent pH. Strong acids can further decrease the apparent pH below 1.7; strong bases have little influence on the apparent pH, probably because, in this range of concentrations, they are titrated by alkoxylcarbonic acid or form ion pairs with alkoxycarbonate. However, bases and salts could stabilize the acidity in the course of gradient runs. Copyright © 2017 Elsevier B.V. All rights reserved.

[InlineEquation not available: see fulltext.]-Means Based Fingerprint Segmentation with Sensor Interoperability

NASA Astrophysics Data System (ADS)

Yang, Gongping; Zhou, Guang-Tong; Yin, Yilong; Yang, Xiukun

2010-12-01

A critical step in an automatic fingerprint recognition system is the segmentation of fingerprint images. Existing methods are usually designed to segment fingerprint images originated from a certain sensor. Thus their performances are significantly affected when dealing with fingerprints collected by different sensors. This work studies the sensor interoperability of fingerprint segmentation algorithms, which refers to the algorithm's ability to adapt to the raw fingerprints obtained from different sensors. We empirically analyze the sensor interoperability problem, and effectively address the issue by proposing a [InlineEquation not available: see fulltext.]-means based segmentation method called SKI. SKI clusters foreground and background blocks of a fingerprint image based on the [InlineEquation not available: see fulltext.]-means algorithm, where a fingerprint block is represented by a 3-dimensional feature vector consisting of block-wise coherence, mean, and variance (abbreviated as CMV). SKI also employs morphological postprocessing to achieve favorable segmentation results. We perform SKI on each fingerprint to ensure sensor interoperability. The interoperability and robustness of our method are validated by experiments performed on a number of fingerprint databases which are obtained from various sensors.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jo, J.C.; Shin, W.K.; Choi, C.Y.

Transient heat transfer problems with phase changes (Stefan problems) occur in many engineering situations, including potential core melting and solidification during pressurized-water-reactor severe accidents, ablation of thermal shields, melting and solidification of alloys, and many others. This article addresses the numerical analysis of nonlinear transient heat transfer with melting or solidification. An effective and simple procedure is presented for the simulation of the motion of the boundary and the transient temperature field during the phase change process. To accomplish this purpose, an iterative implicit solution algorithm has been developed by employing the dual-reciprocity boundary-element method. The dual-reciprocity boundary-element approach providedmore » in this article is much simpler than the usual boundary-element method in applying a reciprocity principle and an available technique for dealing with the domain integral of the boundary element formulation simultaneously. In this article, attention is focused on two-dimensional melting (ablation)/solidification problems for simplicity. The accuracy and effectiveness of the present analysis method have been illustrated through comparisons of the calculation results of some examples of one-phase ablation/solidification problems with their known semianalytical or numerical solutions where available.« less

An Optimal Image-Based Method for Identification of Acoustic Emission (AE) Sources in Plate-Like Structures Using a Lead Zirconium Titanate (PZT) Sensor Array.

PubMed

Yan, Gang; Zhou, Li

2018-02-21

This paper proposes an innovative method for identifying the locations of multiple simultaneous acoustic emission (AE) events in plate-like structures from the view of image processing. By using a linear lead zirconium titanate (PZT) sensor array to record the AE wave signals, a reverse-time frequency-wavenumber (f-k) migration is employed to produce images displaying the locations of AE sources by back-propagating the AE waves. Lamb wave theory is included in the f-k migration to consider the dispersive property of the AE waves. Since the exact occurrence time of the AE events is usually unknown when recording the AE wave signals, a heuristic artificial bee colony (ABC) algorithm combined with an optimal criterion using minimum Shannon entropy is used to find the image with the identified AE source locations and occurrence time that mostly approximate the actual ones. Experimental studies on an aluminum plate with AE events simulated by PZT actuators are performed to validate the applicability and effectiveness of the proposed optimal image-based AE source identification method.

An Optimal Image-Based Method for Identification of Acoustic Emission (AE) Sources in Plate-Like Structures Using a Lead Zirconium Titanate (PZT) Sensor Array

PubMed Central

Zhou, Li

2018-01-01

This paper proposes an innovative method for identifying the locations of multiple simultaneous acoustic emission (AE) events in plate-like structures from the view of image processing. By using a linear lead zirconium titanate (PZT) sensor array to record the AE wave signals, a reverse-time frequency-wavenumber (f-k) migration is employed to produce images displaying the locations of AE sources by back-propagating the AE waves. Lamb wave theory is included in the f-k migration to consider the dispersive property of the AE waves. Since the exact occurrence time of the AE events is usually unknown when recording the AE wave signals, a heuristic artificial bee colony (ABC) algorithm combined with an optimal criterion using minimum Shannon entropy is used to find the image with the identified AE source locations and occurrence time that mostly approximate the actual ones. Experimental studies on an aluminum plate with AE events simulated by PZT actuators are performed to validate the applicability and effectiveness of the proposed optimal image-based AE source identification method. PMID:29466310

Improved Wallis Dodging Algorithm for Large-Scale Super-Resolution Reconstruction Remote Sensing Images.

PubMed

Fan, Chong; Chen, Xushuai; Zhong, Lei; Zhou, Min; Shi, Yun; Duan, Yulin

2017-03-18

A sub-block algorithm is usually applied in the super-resolution (SR) reconstruction of images because of limitations in computer memory. However, the sub-block SR images can hardly achieve a seamless image mosaicking because of the uneven distribution of brightness and contrast among these sub-blocks. An effectively improved weighted Wallis dodging algorithm is proposed, aiming at the characteristic that SR reconstructed images are gray images with the same size and overlapping region. This algorithm can achieve consistency of image brightness and contrast. Meanwhile, a weighted adjustment sequence is presented to avoid the spatial propagation and accumulation of errors and the loss of image information caused by excessive computation. A seam line elimination method can share the partial dislocation in the seam line to the entire overlapping region with a smooth transition effect. Subsequently, the improved method is employed to remove the uneven illumination for 900 SR reconstructed images of ZY-3. Then, the overlapping image mosaic method is adopted to accomplish a seamless image mosaic based on the optimal seam line.

An Improved Swarm Optimization for Parameter Estimation and Biological Model Selection

PubMed Central

Abdullah, Afnizanfaizal; Deris, Safaai; Mohamad, Mohd Saberi; Anwar, Sohail

2013-01-01

One of the key aspects of computational systems biology is the investigation on the dynamic biological processes within cells. Computational models are often required to elucidate the mechanisms and principles driving the processes because of the nonlinearity and complexity. The models usually incorporate a set of parameters that signify the physical properties of the actual biological systems. In most cases, these parameters are estimated by fitting the model outputs with the corresponding experimental data. However, this is a challenging task because the available experimental data are frequently noisy and incomplete. In this paper, a new hybrid optimization method is proposed to estimate these parameters from the noisy and incomplete experimental data. The proposed method, called Swarm-based Chemical Reaction Optimization, integrates the evolutionary searching strategy employed by the Chemical Reaction Optimization, into the neighbouring searching strategy of the Firefly Algorithm method. The effectiveness of the method was evaluated using a simulated nonlinear model and two biological models: synthetic transcriptional oscillators, and extracellular protease production models. The results showed that the accuracy and computational speed of the proposed method were better than the existing Differential Evolution, Firefly Algorithm and Chemical Reaction Optimization methods. The reliability of the estimated parameters was statistically validated, which suggests that the model outputs produced by these parameters were valid even when noisy and incomplete experimental data were used. Additionally, Akaike Information Criterion was employed to evaluate the model selection, which highlighted the capability of the proposed method in choosing a plausible model based on the experimental data. In conclusion, this paper presents the effectiveness of the proposed method for parameter estimation and model selection problems using noisy and incomplete experimental data. This study is hoped to provide a new insight in developing more accurate and reliable biological models based on limited and low quality experimental data. PMID:23593445

Subliminal Messages in Advertising.

ERIC Educational Resources Information Center

Olson, Miles C.

The technique of subliminal information giving has been considerably broadened in recent years so that magazine ads now employ it by carefully hiding images where they are not usually perceived with the conscious eye. In his recent book, "Subliminal Seduction: Ad Media's Manipulation of a Not So Innocent America," Wilson B. Key…

MANPOWER AND THE GROWTH OF PRODUCER SERVICES.

ERIC Educational Resources Information Center

GREENFIELD, HARRY I.

PRODUCER SERVICES, THOSE SERVICES WHICH BUSINESS FIRMS, NONPROFIT INSTITUTIONS, AND GOVERNMENTS PROVIDE AND USUALLY SELL TO THE PRODUCER RATHER THAN TO THE CONSUMER, AND THE FACTORS AFFECTING THEIR SUPPLY AND DEMAND ARE ANALYZED. APPROXIMATELY 8.5 MILLION WORKERS, OR ABOUT 13 PERCENT OF THE TOTAL, ARE EMPLOYED IN PRODUCER SERVICES. DURING THE…

Incorporating Nondrug Social & Recreational Activities in Outpatient Chemical Dependency Treatment

ERIC Educational Resources Information Center

Siporin, Sheldon; Baron, Lisa

2012-01-01

"Contingency Management programs (CMP) and non-drug social and recreational activities (NDSRA) are interventions premised on behavior theory that rely on external sources of reinforcement alternative to drug-based forms to decrease drug use. CMP usually employs vouchers as reinforcement for negative toxicologies. Despite research support, CMP…

Can We Cross the Street in Time?

ERIC Educational Resources Information Center

Greenes, Carole E.; Cavanagh, Mary C.; Tsankova, Jenny K.; Glanfield, Florence A.

2013-01-01

In the authors' examination of various instructional programs, they observed that most provide all the necessary data to solve proportion problems, employ compatible numbers that are usually unrealistic, present numbers (data) in the order in which they are to be manipulated, discuss contexts that cannot be easily replicated, and present…

Certificates: Gateway to Gainful Employment and College Degrees

ERIC Educational Resources Information Center

Carnevale, Anthony P.; Rose, Stephen J.; Hanson, Andrew R.

2012-01-01

Certificates are recognition of completion of a course of study based on a specific field, usually associated with a limited set of occupations. Certificates differ from other kinds of labor market credentials such as industry-based certifications and licenses, which typically involve passing an examination to prove a specific competency,…

The Role of Lecturers and Inclusive Education

ERIC Educational Resources Information Center

Molina, Víctor M.; Perera Rodríguez, Víctor Hugo; Melero Aguilar, Noelia; Cotán Fernández, Almudena; Moriña, Anabel

2016-01-01

This paper presents an analysis of how lecturers respond to students with disabilities, the initial question being: do lecturers aid or hinder students? Findings pertain to a broader research project employing a non-usual research methodology in higher education research and students with disabilities: the biographical-narrative methodology. The…

The False Promise of Public Pensions

ERIC Educational Resources Information Center

Hess, Frederick M.; Squire, Juliet P.

2010-01-01

The vast majority of public employees--including teachers--are enrolled in defined-benefit pension plans. These plans are usually the product of state legislation that determines eligibility, benefit formulas, employer and employee contributions, and how payments will be calculated when an employee retires or leaves the system. Once an employee…

AN ASSESSMENT OF SUNSPOT NUMBER DATA COMPOSITES OVER 1845–2014

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lockwood, M.; Owens, M. J.; Barnard, L.

2016-06-10

New sunspot data composites, some of which are radically different in the character of their long-term variation, are evaluated over the interval 1845–2014. The method commonly used to calibrate historic sunspot data, relative to modern-day data, is “daisy-chaining,” whereby calibration is passed from one data subset to the neighboring one, usually using regressions of the data subsets for the intervals of their overlap. Recent studies have illustrated serious pitfalls in these regressions, and the resulting errors can be compounded by their repeated use as the data sequence is extended back in time. Hence, the recent composite data series by Usoskinmore » et al., R {sub UEA}, is a very important advance because it avoids regressions, daisy-chaining, and other common, but invalid, assumptions: this is achieved by comparing the statistics of “active-day” fractions to those for a single reference data set. We study six sunspot data series, including R {sub UEA} and the new “backbone” data series ( R {sub BB}, recently generated by Svalgaard and Schatten by employing both regression and daisy-chaining). We show that all six can be used with a continuity model to reproduce the main features of the open solar flux variation for 1845–2014, as reconstructed from geomagnetic activity data. However, some differences can be identified that are consistent with tests using a basket of other proxies for solar magnetic fields. Using data from a variety of sunspot observers, we illustrate problems with the method employed in generating R {sub BB} that cause it to increasingly overestimate sunspot numbers going back in time, and we recommend using R {sub UEA} because it employs more robust procedures that avoid such problems.« less

Comparison of two heuristic evaluation methods for evaluating the usability of health information systems.

PubMed

Khajouei, Reza; Hajesmaeel Gohari, Sadrieh; Mirzaee, Moghaddameh

2018-04-01

In addition to following the usual Heuristic Evaluation (HE) method, the usability of health information systems can also be evaluated using a checklist. The objective of this study is to compare the performance of these two methods in identifying usability problems of health information systems. Eight evaluators independently evaluated different parts of a Medical Records Information System using two methods of HE (usual and with a checklist). The two methods were compared in terms of the number of problems identified, problem type, and the severity of identified problems. In all, 192 usability problems were identified by two methods in the Medical Records Information System. This was significantly higher than the number of usability problems identified by the checklist and usual method (148 and 92, respectively) (p < 0.0001). After removing the duplicates, the difference between the number of unique usability problems identified by the checklist method (n = 100) and usual method (n = 44) was significant (p < 0.0001). Differences between the mean severity of the real usability problems (1.83) and those identified by only one of the methods (usual = 2.05, checklist = 1.74) were significant (p = 0.001). This study revealed the potential of the two HE methods for identifying usability problems of health information systems. The results demonstrated that the checklist method had significantly better performance in terms of the number of identified usability problems; however, the performance of the usual method for identifying problems of higher severity was significantly better. Although the checklist method can be more efficient for less experienced evaluators, wherever usability is critical, the checklist should be used with caution in usability evaluations. Copyright © 2018 Elsevier Inc. All rights reserved.

Improved Stress Corrosion Cracking Resistance and Strength of a Two-Step Aged Al-Zn-Mg-Cu Alloy Using Taguchi Method

NASA Astrophysics Data System (ADS)

Lin, Lianghua; Liu, Zhiyi; Ying, Puyou; Liu, Meng

2015-12-01

Multi-step heat treatment effectively enhances the stress corrosion cracking (SCC) resistance but usually degrades the mechanical properties of Al-Zn-Mg-Cu alloys. With the aim to enhance SCC resistance as well as strength of Al-Zn-Mg-Cu alloys, we have optimized the process parameters during two-step aging of Al-6.1Zn-2.8Mg-1.9Cu alloy by Taguchi's L9 orthogonal array. In this work, analysis of variance (ANOVA) was performed to find out the significant heat treatment parameters. The slow strain rate testing combined with scanning electron microscope and transmission electron microscope was employed to study the SCC behaviors of Al-Zn-Mg-Cu alloy. Results showed that the contour map produced by ANOVA offered a reliable reference for selection of optimum heat treatment parameters. By using this method, a desired combination of mechanical performances and SCC resistance was obtained.

Visualization and quantification of transmembrane ion transport into giant unilamellar vesicles.

PubMed

Valkenier, Hennie; López Mora, Néstor; Kros, Alexander; Davis, Anthony P

2015-02-09

Transmembrane ion transporters (ionophores) are widely investigated as supramolecular agents with potential for biological activity. Tests are usually performed in synthetic membranes that are assembled into large unilamellar vesicles (LUVs). However transport must be followed through bulk properties of the vesicle suspension, because LUVs are too small for individual study. An alternative approach is described whereby ion transport can be revealed and quantified through direct observation. The method employs giant unilamellar vesicles (GUVs), which are 20-60 μm in diameter and readily imaged by light microscopy. This allows characterization of individual GUVs containing transporter molecules, followed by studies of transport through fluorescence emission from encapsulated indicators. The method provides new levels of certainty and relevance, given that the GUVs are similar in size to living cells. It has been demonstrated using a highly active anion carrier, and should aid the development of compounds for treating channelopathies such as cystic fibrosis. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

EASI-IMS an expedite and secure technique to screen for 25I-NBOH in blotter papers.

PubMed

de Morais, Damila Rodrigues; Barbosa, Ingrid Lopes; Cunha, Kelly Francisco; Tripodi, Guilherme Lucas; Angolini, Célio Fernando Figueiredo; Franco, Marcos Fernando; de Aquino, Elvis Medeiros; Eberlin, Marcos Nogueira; Costa, Jose Luiz

2017-10-01

The increasing number of new psychoactive substances (NPS) and their quick worldwide spreading, often only slightly modified in the form of new derivatives and analogues, have brought the need for fast, wide-ranging, and unequivocal identification methods in clinical and forensic investigations. Because it usually provides secure results, gas chromatography coupled to mass spectrometry (GC-MS) has been routinely employed as the standard technique for the detection of NPS in blotter papers. For 25I-NBOH (N-(2-hydroxybenzyl)-2-(4-iodo-2,5-dimethoxyphenyl)ethan-1-aminium), however, GC-MS analysis of an blotter paper extract leads to incorrect results. In this work, we investigated whether easy ambient sonic-spray mass spectrometry imaging (EASI-IMS), and ambient ionization MS method can be applied directly to the surface of the sample requiring therefore no extraction or sample preparations, would serve as an efficient, sensitive, and secure alternative for 25I-NBOH screening. Copyright © 2017 John Wiley & Sons, Ltd.

Revealing chemophoric sites in organophosphorus insecticides through the MIA-QSPR modeling of soil sorption data.

PubMed

Daré, Joyce K; Silva, Cristina F; Freitas, Matheus P

2017-10-01

Soil sorption of insecticides employed in agriculture is an important parameter to probe the environmental fate of organic chemicals. Therefore, methods for the prediction of soil sorption of new agrochemical candidates, as well as for the rationalization of the molecular characteristics responsible for a given sorption profile, are extremely beneficial for the environment. A quantitative structure-property relationship method based on chemical structure images as molecular descriptors provided a reliable model for the soil sorption prediction of 24 widely used organophosphorus insecticides. By means of contour maps obtained from the partial least squares regression coefficients and the variable importance in projection scores, key molecular moieties were targeted for possible structural modification, in order to obtain novel and more environmentally friendly insecticide candidates. The image-based descriptors applied encode molecular arrangement, atoms connectivity, groups size, and polarity; consequently, the findings in this work cannot be achieved by a simple relationship with hydrophobicity, usually described by the octanol-water partition coefficient. Copyright © 2017 Elsevier Inc. All rights reserved.

Non-puerperal induced lactation: an infant feeding option in paediatric HIV/AIDS in tropical Africa.

PubMed

Ogunlesi, Tinuade A; Adekanmbi, Folasade A; Fetuga, Bolanle M; Ogundeyi, Mojisola M

2008-09-01

A major problem in the management of infants exposed to HIV is the issue of feeding, which stems from the need to avoid transmission of the virus via breast milk. Other important issues in the nutrition of infants exposed to the virus include severe maternal illness, which makes suckling extremely difficult, and feeding orphans. Wet nursing is one of the recommended steps in addressing the feeding problems of such infants but for reasons of sociocultural disapproval, it appears not to be popular in traditional African settings. Non-puerperal induced lactation or re-lactation of a close relation, usually a grandmother, which hitherto has been used to rehabilitate severely malnourished motherless infants, may be equally useful. The procedure of re-lactation and the limitations of the method are highlighted. Also, the need to employ information, education and communication in improving the sociocultural acceptability of this veritable infant feeding method in tropical Africa is discussed.

A method and the results of loop colostomy.

PubMed

Browning, G G; Parks, A G

1983-04-01

A technique of loop colostomy which avoids a sutured skin wound, employs a deep tension suture with retained polythene sleeve as a bridge, and permits routine use of standard terminal colostomy appliances is described. The clinical results in 51 patients are reported and the advantages of this method of construction discussed. All patients were able to use standard, terminal colostomy appliances routinely from the time of construction. There were no immediate postoperative complications. Delayed complications occurred in 5 (10 per cent) patients. Intraperitoneal closure was performed in 43 patients and was complicated by 1 (2.3 per cent) transient fecal leak and 4 (9.3 per cent) would infections. The absence of a sutured skin wound, the small bridge size, and the circular shape of the stoma facilitate use of accurately fitting, standard terminal colostomy appliances rather than the usual loop colostomy apparatus. This results in an improved skin seal, reduced fecal leakage, easier nursing and stoma care, and better patient morale.

An integrated native mass spectrometry and top-down proteomics method that connects sequence to structure and function of macromolecular complexes

NASA Astrophysics Data System (ADS)

Li, Huilin; Nguyen, Hong Hanh; Ogorzalek Loo, Rachel R.; Campuzano, Iain D. G.; Loo, Joseph A.

2018-02-01

Mass spectrometry (MS) has become a crucial technique for the analysis of protein complexes. Native MS has traditionally examined protein subunit arrangements, while proteomics MS has focused on sequence identification. These two techniques are usually performed separately without taking advantage of the synergies between them. Here we describe the development of an integrated native MS and top-down proteomics method using Fourier-transform ion cyclotron resonance (FTICR) to analyse macromolecular protein complexes in a single experiment. We address previous concerns of employing FTICR MS to measure large macromolecular complexes by demonstrating the detection of complexes up to 1.8 MDa, and we demonstrate the efficacy of this technique for direct acquirement of sequence to higher-order structural information with several large complexes. We then summarize the unique functionalities of different activation/dissociation techniques. The platform expands the ability of MS to integrate proteomics and structural biology to provide insights into protein structure, function and regulation.

Thermal response properties of protective clothing fabrics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baitinger, W.F.

1995-12-31

In the industrial workplace, it becomes increasingly incumbent upon employers to require employees to use suitable protective equipment and to wear protective apparel. When workers may be subjected to accidental radiant, flame, or electric arc heat sources, work clothing should be used that does not become involved in burning. It is axiomatic that work clothing should not become a primary fuel source, adding to the level of heat exposure, since clothing is usually in intimate contact with the skin. Further, clothing should provide sufficient insulation to protect the skin from severe burn injury. If the worker receives such protection frommore » clothing, action then may be taken to escape the confronted thermal hazard. Published laboratory test methods are used to measure flame resistance and thermal responses of flame resistant fabrics in protective clothing. The purpose of this article is to review these test methods, to discuss certain limitations in application, and to suggest how flame resistant cotton fabrics may be used to enhance worker safety.« less

Experimental Study on Inactivation of Bacterial Endotoxin by Using Dielectric Barrier Discharge

NASA Astrophysics Data System (ADS)

Shi, Xingmin; Li, Yaxi; Zhang, Guanjun; Ma, Yue; Shao, Xianjun

2011-12-01

The low-temperature plasma (LTP) generated by dielectric barrier discharge (DBD) was used to sterilize the E.coli endotoxin, which is usually difficult to kill by traditional methods. Three different concentrations of bacterial endotoxin (1 EU/mL, 0.5 EU/mL and 0.25 EU/mL) were treated by LTP for different time (20 s, 40 s and 60 s). Tachypleus amebocyte lysate (TAL) method was employed to detect the concentration variation of bacterial endotoxin before and after the plasma treatment, and endotoxic shock mice model was used to evaluate the inactivation effects of LTP on endotoxin for further study. Experimental results demonstrated that, DBD plasma can inactivate the bacterial endotoxin quickly and effectively, and when the LTP treatment time was increased, the concentrations of bacterial endotoxin decreased gradually (after 60 s plasma treatment, its inactivation effect was beyond the Chinese pharmacopoeia standard), and the average survival time of mice gradually extended. The possible inactivation mechanisms are proposed to be related to reactive oxygen species (ROSs).

Forensic practice in the field of protection of cultural heritage

NASA Astrophysics Data System (ADS)

Kotrlý, Marek; Turková, Ivana

2012-06-01

Microscopic methods play a key role in issues covering analyses of objects of art that are used on the one hand as screening ones, on the other hand they can lead to obtaining data relevant for completion of expertise. Analyses of artworks, gemmological objects and other highly valuable commodities usually do not rank among routine ones, but every analysis is specific, be it e.g. material investigation of artworks, historical textile materials and other antiques (coins, etc.), identification of fragments (from transporters, storage places, etc.), period statues, sculptures compared to originals, analyses of gems and jewellery, etc. A number of analytical techniques may be employed: optical microscopy in transmitted and reflected light, polarization and fluorescence in visible, UV and IR radiation; image analysis, quantitative microspectrophotometry; SEM/EDS/WDS; FTIR and Raman spectroscopy; XRF and microXRF, including mobile one; XRD and microXRD; x-ray backlight or LA-ICP-MS, SIMS, PIXE; further methods of organic analysis are also utilised - GS-MS, MALDI-TOF, etc.

SANIST: optimization of a technology for compound identification based on the European Union directive with applications in forensic, pharmaceutical and food analyses.

PubMed

Cristoni, Simone; Dusi, Guglielmo; Brambilla, Paolo; Albini, Adriana; Conti, Matteo; Brambilla, Maura; Bruno, Antonino; Di Gaudio, Francesca; Ferlin, Luca; Tazzari, Valeria; Mengozzi, Silvia; Barera, Simone; Sialer, Carlos; Trenti, Tommaso; Cantu, Marco; Rossi Bernardi, Luigi; Noonan, Douglas M

2017-01-01

Electrospray Ionization and collision induced dissociation tandem mass spectrometry are usually employed to obtain compound identification through a mass spectra match. Different algorithms have been developed for this purpose (for example the nist match algorithm). These approaches compare the tandem mass spectra of the unknown analyte with the tandem mass spectra spectra of known compounds inserted in a database. The compounds are usually identified on the basis of spectral match value associated with a probability of recognition. However, this approach is not usually applied to multiple reaction monitoring transition spectra achieved by means of triple quadrupole apparatus, mainly due to the lack of a transition spectra database. The Surface Activated Chemical Ionization-Electrospray-NIST Bayesian model database search (SANIST) platform has been recently developed for new potential metabolite biomarker discovery, to confirm their identity and to use them for clinical and diagnostic applications. Here, we present an improved version of the SANIST platform that extends its application to forensic, pharmaceutical, and food analysis studies, where the compound identification rules are strict. The European Union (EU) has set directives for compound identification (EU directive 2002/657/EC). We have applied the SANIST method to identification of 11-nor-9-carboxytetrahydro-cannabinol in urine samples (an example of a forensic application), circulating levels of the immunosuppressive drug tacrolimus in blood (an example of a pharmaceutical application) and glyphosate in fruit juice (an example of a food analysis application) that meet the EU directive requirements. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Development of an occupational advice intervention for patients undergoing lower limb arthroplasty (the OPAL study).

PubMed

Baker, Paul; Coole, Carol; Drummond, Avril; McDaid, Catriona; Khan, Sayeed; Thomson, Louise; Hewitt, Catherine; McNamara, Iain; McDonald, David; Fitch, Judith; Rangan, Amar

2018-06-28

There are an increasing number of patients of working age undergoing hip and knee replacements. Currently there is variation in the advice and support given about sickness absence, recovery to usual activities and return to work after these procedures. Earlier, sustainable, return to work improves the health of patients and benefits their employers and society. An intervention that encourages and supports early recovery to usual activities, including work, has the potential to reduce the health and socioeconomic burden of hip and knee replacements. A two-phase research programme delivered over 27 months will be used to develop and subsequently test the feasibility of an occupational advice intervention to facilitate return to work and usual activities in patients undergoing lower limb arthroplasty. The 2 phases will incorporate a six-stage intervention mapping process: Phase 1: Intervention mapping stages 1-3: 1 Needs assessment (including rapid evidence synthesis, prospective cohort analysis and structured stakeholder interviews) 2 Identification of intended outcomes and performance objectives 3 Selection of theory-based methods and practical strategies Phase 2: Intervention mapping stages 4-6: 4 Development of components and materials for the occupational advice intervention using a modified Delphi process 5 Adoption and implementation of the intervention 6 Evaluation and feasibility testing The study will be undertaken in four National Health Service (NHS) hospitals in the United Kingdom and two Higher Education Institutions. OPAL (Occupational advice for Patients undergoing Arthroplasty of the Lower limb) aims to develop an occupational advice intervention to support early recovery to usual activities including work, which is tailored to the requirements of patients undergoing hip and knee replacements. The developed intervention will then be assessed with a specific focus on evaluating its feasibility as a potential trial intervention to improve speed of recovery to usual activities including work. The study was registered retrospectively with the International Standard Randomised Controlled Trials Number (ISRCTN): 27426982 (Date 20/12/2016) and the International prospective register of systematic reviews (PROSPERO): CRD42016045235 (Date 04/08/2016).

Right For Me: protocol for a cluster randomised trial of two interventions for facilitating shared decision-making about contraceptive methods.

PubMed

Thompson, Rachel; Manski, Ruth; Donnelly, Kyla Z; Stevens, Gabrielle; Agusti, Daniela; Banach, Michelle; Boardman, Maureen B; Brady, Pearl; Colón Bradt, Christina; Foster, Tina; Johnson, Deborah J; Li, Zhongze; Norsigian, Judy; Nothnagle, Melissa; Olson, Ardis L; Shepherd, Heather L; Stern, Lisa F; Tosteson, Tor D; Trevena, Lyndal; Upadhya, Krishna K; Elwyn, Glyn

2017-10-22

Despite the observed and theoretical advantages of shared decision-making in a range of clinical contexts, including contraceptive care, there remains a paucity of evidence on how to facilitate its adoption. This paper describes the protocol for a study to assess the comparative effectiveness of patient-targeted and provider-targeted interventions for facilitating shared decision-making about contraceptive methods. We will conduct a 2×2 factorial cluster randomised controlled trial with four arms: (1) video+prompt card, (2) decision aids+training, (3) video+prompt card and decision aids+training and (4) usual care. The clusters will be clinics in USA that deliver contraceptive care. The participants will be people who have completed a healthcare visit at a participating clinic, were assigned female sex at birth, are aged 15-49 years, are able to read and write English or Spanish and have not previously participated in the study. The primary outcome will be shared decision-making about contraceptive methods. Secondary outcomes will be the occurrence of a conversation about contraception in the healthcare visit, satisfaction with the conversation about contraception, intended contraceptive method(s), intention to use a highly effective method, values concordance of the intended method(s), decision regret, contraceptive method(s) used, use of a highly effective method, use of the intended method(s), adherence, satisfaction with the method(s) used, unintended pregnancy and unwelcome pregnancy. We will collect study data via longitudinal patient surveys administered immediately after the healthcare visit, four weeks later and six months later. We will disseminate results via presentations at scientific and professional conferences, papers published in peer-reviewed, open-access journals and scientific and lay reports. We will also make an anonymised copy of the final participant-level dataset available to others for research purposes. ClinicalTrials.gov Identifier: NCT02759939. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Assessment of groundwater level estimation uncertainty using sequential Gaussian simulation and Bayesian bootstrapping

NASA Astrophysics Data System (ADS)

Varouchakis, Emmanouil; Hristopulos, Dionissios

2015-04-01

Space-time geostatistical approaches can improve the reliability of dynamic groundwater level models in areas with limited spatial and temporal data. Space-time residual Kriging (STRK) is a reliable method for spatiotemporal interpolation that can incorporate auxiliary information. The method usually leads to an underestimation of the prediction uncertainty. The uncertainty of spatiotemporal models is usually estimated by determining the space-time Kriging variance or by means of cross validation analysis. For de-trended data the former is not usually applied when complex spatiotemporal trend functions are assigned. A Bayesian approach based on the bootstrap idea and sequential Gaussian simulation are employed to determine the uncertainty of the spatiotemporal model (trend and covariance) parameters. These stochastic modelling approaches produce multiple realizations, rank the prediction results on the basis of specified criteria and capture the range of the uncertainty. The correlation of the spatiotemporal residuals is modeled using a non-separable space-time variogram based on the Spartan covariance family (Hristopulos and Elogne 2007, Varouchakis and Hristopulos 2013). We apply these simulation methods to investigate the uncertainty of groundwater level variations. The available dataset consists of bi-annual (dry and wet hydrological period) groundwater level measurements in 15 monitoring locations for the time period 1981 to 2010. The space-time trend function is approximated using a physical law that governs the groundwater flow in the aquifer in the presence of pumping. The main objective of this research is to compare the performance of two simulation methods for prediction uncertainty estimation. In addition, we investigate the performance of the Spartan spatiotemporal covariance function for spatiotemporal geostatistical analysis. Hristopulos, D.T. and Elogne, S.N. 2007. Analytic properties and covariance functions for a new class of generalized Gibbs random fields. IΕΕΕ Transactions on Information Theory, 53:4667-4467. Varouchakis, E.A. and Hristopulos, D.T. 2013. Improvement of groundwater level prediction in sparsely gauged basins using physical laws and local geographic features as auxiliary variables. Advances in Water Resources, 52:34-49. Research supported by the project SPARTA 1591: "Development of Space-Time Random Fields based on Local Interaction Models and Applications in the Processing of Spatiotemporal Datasets". "SPARTA" is implemented under the "ARISTEIA" Action of the operational programme Education and Lifelong Learning and is co-funded by the European Social Fund (ESF) and National Resources.

Petermann I and II spot size: Accurate semi analytical description involving Nelder-Mead method of nonlinear unconstrained optimization and three parameter fundamental modal field

NASA Astrophysics Data System (ADS)

Roy Choudhury, Raja; Roy Choudhury, Arundhati; Kanti Ghose, Mrinal

2013-01-01

A semi-analytical model with three optimizing parameters and a novel non-Gaussian function as the fundamental modal field solution has been proposed to arrive at an accurate solution to predict various propagation parameters of graded-index fibers with less computational burden than numerical methods. In our semi analytical formulation the optimization of core parameter U which is usually uncertain, noisy or even discontinuous, is being calculated by Nelder-Mead method of nonlinear unconstrained minimizations as it is an efficient and compact direct search method and does not need any derivative information. Three optimizing parameters are included in the formulation of fundamental modal field of an optical fiber to make it more flexible and accurate than other available approximations. Employing variational technique, Petermann I and II spot sizes have been evaluated for triangular and trapezoidal-index fibers with the proposed fundamental modal field. It has been demonstrated that, the results of the proposed solution identically match with the numerical results over a wide range of normalized frequencies. This approximation can also be used in the study of doped and nonlinear fiber amplifier.

Sensor-less pseudo-sinusoidal drive for a permanent-magnet brushless ac motor

NASA Astrophysics Data System (ADS)

Liu, Li-Hsiang; Chern, Tzuen-Lih; Pan, Ping-Lung; Huang, Tsung-Mou; Tsay, Der-Min; Kuang, Jao-Hwa

2012-04-01

The precise rotor-position information is required for a permanent-magnet brushless ac motor (BLACM) drive. In the conventional sinusoidal drive method, either an encoder or a resolver is usually employed. For position sensor-less vector control schemes, the rotor flux estimation and torque components are obtained by complicated coordinate transformations. These computational intensive methods are susceptible to current distortions and parameter variations. To simplify the method complexity, this work presents a sensor-less pseudo-sinusoidal drive scheme with speed control for a three-phase BLACM. Based on the sinusoidal drive scheme, a floating period of each phase current is inserted for back electromotive force detection. The zero-crossing point is determined directly by the proposed scheme, and the rotor magnetic position and rotor speed can be estimated simultaneously. Several experiments for various active angle periods are undertaken. Furthermore, a current feedback control is included to minimize and compensate the torque fluctuation. The experimental results show that the proposed method has a competitive performance compared with the conventional drive manners for BLACM. The proposed scheme is straightforward, bringing the benefits of sensor-less drive and negating the need for coordinate transformations in the operating process.

Correction of photoresponse nonuniformity for matrix detectors based on prior compensation for their nonlinear behavior.

PubMed

Ferrero, Alejandro; Campos, Joaquin; Pons, Alicia

2006-04-10

What we believe to be a novel procedure to correct the nonuniformity that is inherent in all matrix detectors has been developed and experimentally validated. This correction method, unlike other nonuniformity-correction algorithms, consists of two steps that separate two of the usual problems that affect characterization of matrix detectors, i.e., nonlinearity and the relative variation of the pixels' responsivity across the array. The correction of the nonlinear behavior remains valid for any illumination wavelength employed, as long as the nonlinearity is not due to power dependence of the internal quantum efficiency. This method of correction of nonuniformity permits the immediate calculation of the correction factor for any given power level and for any illuminant that has a known spectral content once the nonuniform behavior has been characterized for a sufficient number of wavelengths. This procedure has a significant advantage compared with other traditional calibration-based methods, which require that a full characterization be carried out for each spectral distribution pattern of the incident optical radiation. The experimental application of this novel method has achieved a 20-fold increase in the uniformity of a CCD array for response levels close to saturation.

Optimized universal color palette design for error diffusion

NASA Astrophysics Data System (ADS)

Kolpatzik, Bernd W.; Bouman, Charles A.

1995-04-01

Currently, many low-cost computers can only simultaneously display a palette of 256 color. However, this palette is usually selectable from a very large gamut of available colors. For many applications, this limited palette size imposes a significant constraint on the achievable image quality. We propose a method for designing an optimized universal color palette for use with halftoning methods such as error diffusion. The advantage of a universal color palette is that it is fixed and therefore allows multiple images to be displayed simultaneously. To design the palette, we employ a new vector quantization method known as sequential scalar quantization (SSQ) to allocate the colors in a visually uniform color space. The SSQ method achieves near-optimal allocation, but may be efficiently implemented using a series of lookup tables. When used with error diffusion, SSQ adds little computational overhead and may be used to minimize the visual error in an opponent color coordinate system. We compare the performance of the optimized algorithm to standard error diffusion by evaluating a visually weighted mean-squared-error measure. Our metric is based on the color difference in CIE L*AL*B*, but also accounts for the lowpass characteristic of human contrast sensitivity.

Syllogistic reasoning in fuzzy logic and its application to usuality and reasoning with dispositions

NASA Technical Reports Server (NTRS)

Zadeh, L. A.

1985-01-01

A fuzzy syllogism in fuzzy logic is defined to be an inference schema in which the major premise, the minor premise and the conclusion are propositions containing fuzzy quantifiers. A basic fuzzy syllogism in fuzzy logic is the intersection/product syllogism. Several other basic syllogisms are developed that may be employed as rules of combination of evidence in expert systems. Among these is the consequent conjunction syllogism. Furthermore, it is shown that syllogistic reasoning in fuzzy logic provides a basis for reasoning with dispositions; that is, with propositions that are preponderantly but not necessarily always true. It is also shown that the concept of dispositionality is closely related to the notion of usuality and serves as a basis for what might be called a theory of usuality - a theory which may eventually provide a computational framework for commonsense reasoning.

Vertical intensity modulation for improved radiographic penetration and reduced exclusion zone

NASA Astrophysics Data System (ADS)

Bendahan, J.; Langeveld, W. G. J.; Bharadwaj, V.; Amann, J.; Limborg, C.; Nosochkov, Y.

2016-09-01

In the present work, a method to direct the X-ray beam in real time to the desired locations in the cargo to increase penetration and reduce exclusion zone is presented. Cargo scanners employ high energy X-rays to produce radiographic images of the cargo. Most new scanners employ dual-energy to produce, in addition to attenuation maps, atomic number information in order to facilitate the detection of contraband. The electron beam producing the bremsstrahlung X-ray beam is usually directed approximately to the center of the container, concentrating the highest X-ray intensity to that area. Other parts of the container are exposed to lower radiation levels due to the large drop-off of the bremsstrahlung radiation intensity as a function of angle, especially for high energies (>6 MV). This results in lower penetration in these areas, requiring higher power sources that increase the dose and exclusion zone. The capability to modulate the X-ray source intensity on a pulse-by-pulse basis to deliver only as much radiation as required to the cargo has been reported previously. This method is, however, controlled by the most attenuating part of the inspected slice, resulting in excessive radiation to other areas of the cargo. A method to direct a dual-energy beam has been developed to provide a more precisely controlled level of required radiation to highly attenuating areas. The present method is based on steering the dual-energy electron beam using magnetic components on a pulse-to-pulse basis to a fixed location on the X-ray production target, but incident at different angles so as to direct the maximum intensity of the produced bremsstrahlung to the desired locations. The details of the technique and subsystem and simulation results are presented.

Making the business case for enhanced depression care: the National Institute of Mental Health-harvard Work Outcomes Research and Cost-effectiveness Study.

PubMed

Wang, Philip S; Simon, Gregory E; Kessler, Ronald C

2008-04-01

Explore the business case for enhanced depression care and establish a return on investment rationale for increased organizational involvement by employer-purchasers. Literature review, focused on the National Institute of Mental Health-sponsored Work Outcomes Research and Cost-effectiveness Study. This randomized controlled trial compared telephone outreach, care management, and optional psychotherapy to usual care among depressed workers in large national corporations. By 12 months, the intervention significantly improved depression outcomes, work retention, and hours worked among the employed. Results of the Work Outcomes Research and Cost-effectiveness Study trial and other studies suggest that enhanced depression care programs represent a human capital investment opportunity for employers.

Towards a Viscous Wall Model for Immersed Boundary Methods

NASA Technical Reports Server (NTRS)

Brehm, Christoph; Barad, Michael F.; Kiris, Cetin C.

2016-01-01

Immersed boundary methods are frequently employed for simulating flows at low Reynolds numbers or for applications where viscous boundary layer effects can be neglected. The primary shortcoming of Cartesian mesh immersed boundary methods is the inability of efficiently resolving thin turbulent boundary layers in high-Reynolds number flow application. The inefficiency of resolving the thin boundary is associated with the use of constant aspect ratio Cartesian grid cells. Conventional CFD approaches can efficiently resolve the large wall normal gradients by utilizing large aspect ratio cells near the wall. This paper presents different approaches for immersed boundary methods to account for the viscous boundary layer interaction with the flow-field away from the walls. Different wall modeling approaches proposed in previous research studies are addressed and compared to a new integral boundary layer based approach. In contrast to common wall-modeling approaches that usually only utilize local flow information, the integral boundary layer based approach keeps the streamwise history of the boundary layer. This allows the method to remain effective at much larger y+ values than local wall modeling approaches. After a theoretical discussion of the different approaches, the method is applied to increasingly more challenging flow fields including fully attached, separated, and shock-induced separated (laminar and turbulent) flows.

Probabilistic analysis of wind-induced vibration mitigation of structures by fluid viscous dampers

NASA Astrophysics Data System (ADS)

Chen, Jianbing; Zeng, Xiaoshu; Peng, Yongbo

2017-11-01

The high-rise buildings usually suffer from excessively large wind-induced vibrations, and thus vibration control systems might be necessary. Fluid viscous dampers (FVDs) with nonlinear power law against velocity are widely employed. With the transition of design method from traditional frequency domain approaches to more refined direct time domain approaches, the difficulty of time integration of these systems occurs sometimes. In the present paper, firstly the underlying reason of the difficulty is revealed by identifying that the equations of motion of high-rise buildings installed with FVDs are sometimes stiff differential equations. Thus, an approach effective for stiff differential systems, i.e., the backward difference formula (BDF), is then introduced, and verified to be effective for the equation of motion of wind-induced vibration controlled systems. Comparative studies are performed among some methods, including the Newmark method, KR-alpha method, energy-based linearization method and the statistical linearization method. Based on the above results, a 20-story steel frame structure is taken as a practical example. Particularly, the randomness of structural parameters and of wind loading input is emphasized. The extreme values of the responses are examined, showing the effectiveness of the proposed approach, and also necessitating the refined probabilistic analysis in the design of wind-induced vibration mitigation systems.

Assessing sample representativeness in randomized controlled trials: application to the National Institute of Drug Abuse Clinical Trials Network.

PubMed

Susukida, Ryoko; Crum, Rosa M; Stuart, Elizabeth A; Ebnesajjad, Cyrus; Mojtabai, Ramin

2016-07-01

To compare the characteristics of individuals participating in randomized controlled trials (RCTs) of treatments of substance use disorder (SUD) with individuals receiving treatment in usual care settings, and to provide a summary quantitative measure of differences between characteristics of these two groups of individuals using propensity score methods. Design Analyses using data from RCT samples from the National Institute of Drug Abuse Clinical Trials Network (CTN) and target populations of patients drawn from the Treatment Episodes Data Set-Admissions (TEDS-A). Settings Multiple clinical trial sites and nation-wide usual SUD treatment settings in the United States. A total of 3592 individuals from 10 CTN samples and 1 602 226 individuals selected from TEDS-A between 2001 and 2009. Measurements The propensity scores for enrolling in the RCTs were computed based on the following nine observable characteristics: sex, race/ethnicity, age, education, employment status, marital status, admission to treatment through criminal justice, intravenous drug use and the number of prior treatments. Findings The proportion of those with ≥ 12 years of education and the proportion of those who had full-time jobs were significantly higher among RCT samples than among target populations (in seven and nine trials, respectively, at P < 0.001). The pooled difference in the mean propensity scores between the RCTs and the target population was 1.54 standard deviations and was statistically significant at P < 0.001. In the United States, individuals recruited into randomized controlled trials of substance use disorder treatments appear to be very different from individuals receiving treatment in usual care settings. Notably, RCT participants tend to have more years of education and a greater likelihood of full-time work compared with people receiving care in usual care settings. © 2016 Society for the Study of Addiction.

Production of an anti-dermatophyte monoclonal antibody and its application: immunochromatographic detection of dermatophytes

PubMed Central

Noriki, Sakon; Ishida, Hisaya

2016-01-01

Tinea refers to superficial infection with one of three fungal genera—Microsporum, Epidermophyton, or Trichophyton—that are collectively known as dermatophytes. These infections are among the most common diseases worldwide and cause chronic morbidity. They are usually diagnosed by direct microscopy and fungal culture, which are burdensome to perform in the clinical setting. To supplement conventional methods, we developed a new method that employs an immunochromatography test for detection of dermatophyte infections. First, anti-Trichophyton monoclonal antibodies (mAb) were produced in mice using a Trichophyton allergen solution as an immunogen. The mAb specificity was assessed by immunostaining alcohol fixed slide cultures and formalin fixed paraffin-embedded microbial samples. Both alcohol- and formalin-fixed samples of all seven species of Trichophyton tested displayed positive immunostaining. Immunochromatography test strips were created using the anti-Trichophyton mAb. The efficiency of the test strip was assessed in patients diagnosed with tinea unguium and in healthy volunteers. Of the 20 patient nails tested, 19 tested positive and one tested negative, whereas of the 17 volunteer nails, only one tested positive. However, KOH microscopic examination of the volunteer nail that tested positive revealed the existence of Trichophyton hyphae. Although the number of nails assayed was small, since the assay had a sensitivity of 95.0% (19/20) and a specificity of 94.1% (16/17), the obtained results were considered to be promising. Thus, while further investigation with a greater number of samples is necessary, this method could potentially be employed as a new diagnostic tool for Trichophyton in the future. PMID:27250927

Effect of Acculturation on Variations in Having a Usual Source of Care Among Asian Americans and Non-Hispanic Whites in California

PubMed Central

Han, Hae-Ra

2015-01-01

Objectives. We examined variations in having a usual source of care (USC) among non-Hispanic White and Asian American adults in California. Methods. Data were from the 2005 and 2009 California Health Interview Survey. Using a modified Anderson model, we used multiple logistic regression to compare odds of having a USC between non-Hispanic White (n = 38 554) and Asian American adults (n = 7566) and to examine associations with acculturation factors (English proficiency, length of residence, residence in a racially concordant neighborhood) and key enabling (employment, income, insurance) and predisposing (education) factors. Results. Race-related disparities between Asian Americans and non-Hispanic Whites in having a USC were no longer significant after accounting for acculturation factors. Limited English proficiency and short time in the United States (< 5 years) were significantly associated with not having a USC for both races. Increasing levels of education and insurance were not associated with better access among Asian Americans. Conclusions. Key differences exist in how Asian American and non-Hispanic White adults access care. Acculturation factors are key drivers of disparities and should be included in access-to-care models with Asians. Insurance and education are differentially significant for Asian Americans and non-Hispanic Whites. PMID:25033147

Organ transplant tissue rejection: detection and staging by fluorescence spectroscopy

NASA Astrophysics Data System (ADS)

MacAulay, Calum E.; Whitehead, Peter D.; McManus, Bruce; Zeng, Haishan; Wilson-McManus, Janet; MacKinnon, Nick; Morgan, David C.; Dong, Chunming; Gerla, Paul; Kenyon, Jennifer

1998-07-01

Patients receiving heart or other organ transplants usually require some level of anti-rejection drug therapy, most commonly cyclosporine. The rejection status of the organ must be monitored to determine the optimal anti-rejection drug therapy. The current method for monitoring post-transplant rejection status of heart transplant patients consists of taking biopsies from the right ventricle. In this work we have developed a system employing optical and signal-processing techniques that will allow a cardiologist to measure spectral changes associated with tissue rejection using an optical catheter probe. The system employs time gated illumination and detection systems to deal with the dynamic signal acquisition problems associated with in vivo measurements of a beating heart. Spectral data processing software evaluates and processes the data to produce a simple numerical score. Results of measurements made on 100 excised transplanted isograft and allograft rat hearts have demonstrated the ability of the system to detect the presence of rejection and to accurately correlate the spectroscopic results with the ISHLT (International Society for Heart and Lung Transplantation) stage of rejection determined by histopathology. In vivo measurements using a pig transplant model are now in process.

Systematic Assessment of Seven Solvent and Solid-Phase Extraction Methods for Metabolomics Analysis of Human Plasma by LC-MS

NASA Astrophysics Data System (ADS)

Sitnikov, Dmitri G.; Monnin, Cian S.; Vuckovic, Dajana

2016-12-01

The comparison of extraction methods for global metabolomics is usually executed in biofluids only and focuses on metabolite coverage and method repeatability. This limits our detailed understanding of extraction parameters such as recovery and matrix effects and prevents side-by-side comparison of different sample preparation strategies. To address this gap in knowledge, seven solvent-based and solid-phase extraction methods were systematically evaluated using standard analytes spiked into both buffer and human plasma. We compared recovery, coverage, repeatability, matrix effects, selectivity and orthogonality of all methods tested for non-lipid metabolome in combination with reversed-phased and mixed-mode liquid chromatography mass spectrometry analysis (LC-MS). Our results confirmed wide selectivity and excellent precision of solvent precipitations, but revealed their high susceptibility to matrix effects. The use of all seven methods showed high overlap and redundancy which resulted in metabolite coverage increases of 34-80% depending on LC-MS method employed as compared to the best single extraction protocol (methanol/ethanol precipitation) despite 7x increase in MS analysis time and sample consumption. The most orthogonal methods to methanol-based precipitation were ion-exchange solid-phase extraction and liquid-liquid extraction using methyl-tertbutyl ether. Our results help facilitate rational design and selection of sample preparation methods and internal standards for global metabolomics.

Systematic Assessment of Seven Solvent and Solid-Phase Extraction Methods for Metabolomics Analysis of Human Plasma by LC-MS

PubMed Central

Sitnikov, Dmitri G.; Monnin, Cian S.; Vuckovic, Dajana

2016-01-01

The comparison of extraction methods for global metabolomics is usually executed in biofluids only and focuses on metabolite coverage and method repeatability. This limits our detailed understanding of extraction parameters such as recovery and matrix effects and prevents side-by-side comparison of different sample preparation strategies. To address this gap in knowledge, seven solvent-based and solid-phase extraction methods were systematically evaluated using standard analytes spiked into both buffer and human plasma. We compared recovery, coverage, repeatability, matrix effects, selectivity and orthogonality of all methods tested for non-lipid metabolome in combination with reversed-phased and mixed-mode liquid chromatography mass spectrometry analysis (LC-MS). Our results confirmed wide selectivity and excellent precision of solvent precipitations, but revealed their high susceptibility to matrix effects. The use of all seven methods showed high overlap and redundancy which resulted in metabolite coverage increases of 34–80% depending on LC-MS method employed as compared to the best single extraction protocol (methanol/ethanol precipitation) despite 7x increase in MS analysis time and sample consumption. The most orthogonal methods to methanol-based precipitation were ion-exchange solid-phase extraction and liquid-liquid extraction using methyl-tertbutyl ether. Our results help facilitate rational design and selection of sample preparation methods and internal standards for global metabolomics. PMID:28000704

Effects of an employer-based intervention on employment outcomes for youth with significant support needs due to autism.

PubMed

Wehman, Paul; Schall, Carol M; McDonough, Jennifer; Graham, Carolyn; Brooke, Valerie; Riehle, J Erin; Brooke, Alissa; Ham, Whitney; Lau, Stephanie; Allen, Jaclyn; Avellone, Lauren

2017-04-01

The purpose of this study was to develop and investigate an employer-based 9-month intervention for high school youth with autism spectrum disorder to learn job skills and acquire employment. The intervention modified a program titled Project SEARCH and incorporated the use of applied behavior analysis to develop Project SEARCH plus Autism Spectrum Disorder Supports. A randomized clinical trial compared the implementation of Project SEARCH plus Autism Spectrum Disorder Supports with high school special education services as usual. Participants were 49 high-school-aged individuals between the ages of 18 and 21 years diagnosed with an autism spectrum disorder and eligible for supported employment. Students also had to demonstrate independent self-care. At 3 months post-graduation, 90% of the treatment group acquired competitive, part-time employment earning US$9.53-US$10.66 per hour. Furthermore, 87% of those individuals maintained employment at 12 months post-graduation. The control group's employment outcomes were 6% acquiring employment by 3 months post-graduation and 12% acquiring employment by 12 months post-graduation. The positive employment outcomes generated by the treatment group provide evidence that youth with autism spectrum disorder can gain and maintain competitive employment. Additionally, there is evidence that they are able to advance within that time toward more weekly hours worked, while they also displayed increasing independence in the work setting.

Comparing four methods to estimate usual intake distributions.

PubMed

Souverein, O W; Dekkers, A L; Geelen, A; Haubrock, J; de Vries, J H; Ocké, M C; Harttig, U; Boeing, H; van 't Veer, P

2011-07-01

The aim of this paper was to compare methods to estimate usual intake distributions of nutrients and foods. As 'true' usual intake distributions are not known in practice, the comparison was carried out through a simulation study, as well as empirically, by application to data from the European Food Consumption Validation (EFCOVAL) Study in which two 24-h dietary recalls (24-HDRs) and food frequency data were collected. The methods being compared were the Iowa State University Method (ISU), National Cancer Institute Method (NCI), Multiple Source Method (MSM) and Statistical Program for Age-adjusted Dietary Assessment (SPADE). Simulation data were constructed with varying numbers of subjects (n), different values for the Box-Cox transformation parameter (λ(BC)) and different values for the ratio of the within- and between-person variance (r(var)). All data were analyzed with the four different methods and the estimated usual mean intake and selected percentiles were obtained. Moreover, the 2-day within-person mean was estimated as an additional 'method'. These five methods were compared in terms of the mean bias, which was calculated as the mean of the differences between the estimated value and the known true value. The application of data from the EFCOVAL Project included calculations of nutrients (that is, protein, potassium, protein density) and foods (that is, vegetables, fruit and fish). Overall, the mean bias of the ISU, NCI, MSM and SPADE Methods was small. However, for all methods, the mean bias and the variation of the bias increased with smaller sample size, higher variance ratios and with more pronounced departures from normality. Serious mean bias (especially in the 95th percentile) was seen using the NCI Method when r(var) = 9, λ(BC) = 0 and n = 1000. The ISU Method and MSM showed a somewhat higher s.d. of the bias compared with NCI and SPADE Methods, indicating a larger method uncertainty. Furthermore, whereas the ISU, NCI and SPADE Methods produced unimodal density functions by definition, MSM produced distributions with 'peaks', when sample size was small, because of the fact that the population's usual intake distribution was based on estimated individual usual intakes. The application to the EFCOVAL data showed that all estimates of the percentiles and mean were within 5% of each other for the three nutrients analyzed. For vegetables, fruit and fish, the differences were larger than that for nutrients, but overall the sample mean was estimated reasonably. The four methods that were compared seem to provide good estimates of the usual intake distribution of nutrients. Nevertheless, care needs to be taken when a nutrient has a high within-person variation or has a highly skewed distribution, and when the sample size is small. As the methods offer different features, practical reasons may exist to prefer one method over the other.

Who Is the Engaged Citizen? Correlates of Secondary School Students' Concepts of Good Citizenship

ERIC Educational Resources Information Center

Reichert, Frank

2016-01-01

The opinions about what characterises a good citizen are diverse, yet survey research usually employs variable-centred analytical strategies to examine people's concepts of good citizenship. The present study builds on a person-centred approach towards good citizenship and validates previously identified types of good citizenship among Australian…

Usual and Virtual Reality Video Game-Based Physiotherapy for Children and Youth with Acquired Brain Injuries

ERIC Educational Resources Information Center

Levac, Danielle; Miller, Patricia; Missiuna, Cheryl

2012-01-01

Little is known about how therapists promote learning of functional motor skills for children with acquired brain injuries. This study explores physiotherapists' description of these interventions in comparison to virtual reality (VR) video game-based therapy. Six physiotherapists employed at a children's rehabilitation center participated in…

What a Difference a Writing Centre Makes: A Small Scale Study

ERIC Educational Resources Information Center

Yeats, Rowena; Reddy, Peter; Wheeler, Anne; Senior, Carl; Murray, John

2010-01-01

Purpose: Academic writing is often considered to be a weakness in contemporary students, while good reporting and writing skills are highly valued by graduate employers. A number of universities have introduced writing centres aimed at addressing this problem; however, the evaluation of such centres is usually qualitative. The paper seeks to…

Reliability and Validity of the Flemish Physical Activity Computerized Questionnaire in Adults

ERIC Educational Resources Information Center

Matton, Lynn; Wijndaele, Katrien; Duvigneaud, Nathalie; Duquet, William; Philippaerts, Renaat; Thomis, Martine; Lefevre, Johan

2007-01-01

The purpose of this study was to investigate the test-retest reliability and concurrent validity of the Flemish Physical Activity Computerized Questionnaire (FPACQ) in employed/unemployed and retired people. The FPACQ was developed to assess detailed information on several dimensions of physical activity and sedentary behavior over a usual week. A…

English Language Teacher Development through Teacher Associations: The Case of NELTA

ERIC Educational Resources Information Center

Gnawali, Laxman

2016-01-01

ELT teacher associations, a common phenomenon in most countries around the world, employ different strategies in order to support the professional development of their membership. These associations usually spell out member support policies and strategies in documents such as statutes and websites, and put them into action allowing teachers to…

Why Women Work.

ERIC Educational Resources Information Center

Employment Standards Administration (DOL), Washington, DC. Women's Bureau.

Decisions by individual women to seek employment outside the home are usually based on economic reasons. Most women in the labor force work because their families need the money they can earn--some work to raise family living standards above the low-income or poverty level; others, to help meet rising costs of food and education for their…

Creating Effective Educational Computer Games for Undergraduate Classroom Learning: A Conceptual Model

ERIC Educational Resources Information Center

Rapeepisarn, Kowit; Wong, Kok Wai; Fung, Chun Che; Khine, Myint Swe

2008-01-01

When designing Educational Computer Games, designers usually consider target age, interactivity, interface and other related issues. They rarely explore the genres which should employ into one type of educational game. Recently, some digital game-based researchers made attempt to combine game genre with learning theory. Different researchers use…

Characteristics of people who start fires...

Treesearch

John R. Christiansen; William S. Folkman

1971-01-01

Recreationists or city dwellers are usually most often thought of as being responsible for starting forest fires. But a limited study showed that fire starters were more apt to be people who lived near and worked on the National Forests. They were relatively young and undereducated, and had "good reputations" in their communities. Employers held responsible...

Jobs for Which a High School Education is Usually Required.

ERIC Educational Resources Information Center

Bureau of Labor Standards (DOL), Washington, DC.

This document lists 61 occupations, each followed by a summary which gives highlights of job qualifications and training and employment trends (1974-1985) from the "Occupational Outlook Handbook." It is noted that special talents, attitudes, and personal characteristics not mentioned in this publication may be needed for many occupations and that…

5 CFR 831.1209 - Termination of disability annuity because of restoration to earning capacity.

Code of Federal Regulations, 2012 CFR

2012-01-01

... common law rules applicable in determining the existence of an employer-employee relationship. Whether the relationship exists under the usual common law rules will be determined by OPM after the... disability pay beyond 6 months of illness, or workers' compensation payments; (v) The value of meals and...

5 CFR 831.1209 - Termination of disability annuity because of restoration to earning capacity.

Code of Federal Regulations, 2013 CFR

2013-01-01

... common law rules applicable in determining the existence of an employer-employee relationship. Whether the relationship exists under the usual common law rules will be determined by OPM after the... disability pay beyond 6 months of illness, or workers' compensation payments; (v) The value of meals and...

5 CFR 831.1209 - Termination of disability annuity because of restoration to earning capacity.

Code of Federal Regulations, 2011 CFR

2011-01-01

... common law rules applicable in determining the existence of an employer-employee relationship. Whether the relationship exists under the usual common law rules will be determined by OPM after the... disability pay beyond 6 months of illness, or workers' compensation payments; (v) The value of meals and...

5 CFR 831.1209 - Termination of disability annuity because of restoration to earning capacity.

Code of Federal Regulations, 2014 CFR

2014-01-01

... common law rules applicable in determining the existence of an employer-employee relationship. Whether the relationship exists under the usual common law rules will be determined by OPM after the... disability pay beyond 6 months of illness, or workers' compensation payments; (v) The value of meals and...

Jobs for Which Junior College, Technical Institute, or Other Specialized Training Is Usually Required.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Selected from the "Occupational Outlook Handbook," the listings included in this document represent a number of occupations for which junior college or other special training is useful. Each listing, grouped under a broader occupational area, provides a specific occupational title, number employed in the occupation in 1974, qualifications and…

21 CFR 1301.22 - Exemption of agents and employees; affiliated practitioners.

Code of Federal Regulations, 2010 CFR

2010-04-01

... independent activities, if such agent or employee is acting in the usual course of his/her business or... course of business or employment, administer or dispense (other than by issuance of prescription... agent or employee of a hospital or other institution may, when acting in the normal course of business...

Exploring Auditory Saltation Using the "Reduced-Rabbit" Paradigm

ERIC Educational Resources Information Center

Getzmann, Stephan

2009-01-01

Sensory saltation is a spatiotemporal illusion in which the judged positions of stimuli are shifted toward subsequent stimuli that follow closely in time. So far, studies on saltation in the auditory domain have usually employed subjective rating techniques, making it difficult to exactly quantify the extent of saltation. In this study, temporal…

Folded-path optical analysis gas cell

DOEpatents

Carangelo, R.M.; Wright, D.D.

1995-08-08

A folded-path gas cell employs an elliptical concave mirror in confronting relationship to two substantially spherical concave mirrors. At least one of the spherical mirrors, and usually both, are formed with an added cylindrical component to increase orthogonal foci coincidence and thereby to increase the radiation energy throughput characteristic of the cell. 10 figs.

Lecturer Responses to the Inclusion of Students with Intellectual Disabilities Auditing Undergraduate Classes

ERIC Educational Resources Information Center

O'Connor, Barrie; Kubiak, John; Espiner, Deborah; O'Brien, Patricia

2012-01-01

Although postsecondary education for people with intellectual disabilities can improve their chances of employment and create a more satisfying life, higher education is becoming a more usual avenue of postschool learning. As part of a 2-year Certificate in Contemporary Living (CCL) Program offered at Trinity College Dublin, students audited…

"Women's Work" within Librarianship: Time to Expand the Feminist Agenda.

ERIC Educational Resources Information Center

Hildenbrand, Suzanne

1989-01-01

Notes that the literature shows female intensive professions are usually devalued in terms of pay, status, career opportunities, and working conditions. It is argued that gender equity in librarianship should focus on library specialties, such as children's librarianship and cataloging, that are more likely to employ women than the profession as a…

A Stopped-Flow Kinetics Experiment for the Physical Chemistry Laboratory Using Noncorrosive Reagents

ERIC Educational Resources Information Center

Prigodich, Richard V.

2014-01-01

Stopped-flow kinetics techniques are important to the study of rapid chemical and biochemical reactions. Incorporation of a stopped-flow kinetics experiment into the physical chemistry laboratory curriculum would therefore be an instructive addition. However, the usual reactions studied in such exercises employ a corrosive reagent that can over…

31 CFR 215.11 - Miscellaneous provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., STATE, CITY AND COUNTY INCOME OR EMPLOYMENT TAXES BY FEDERAL AGENCIES Withholding Agreement § 215.11..., or (b) To consent to the application of any provision of law of the State, city or county which has... withheld taxes to a State, city or county that do not conform to the usual fiscal practices of agencies, or...

31 CFR 215.11 - Miscellaneous provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., STATE, CITY AND COUNTY INCOME OR EMPLOYMENT TAXES BY FEDERAL AGENCIES Withholding Agreement § 215.11..., or (b) To consent to the application of any provision of law of the State, city or county which has... withheld taxes to a State, city or county that do not conform to the usual fiscal practices of agencies, or...

Student & Family Assistance Programs and Services To Address Barriers to Learning. A Center Training Tutorial.

ERIC Educational Resources Information Center

California Univ., Los Angeles. Center for Mental Health in Schools.

Most school districts employ student support or "pupil services professionals," such as school psychologists, counselors, and social workers. These personnel perform services connected with mental health and psychosocial problems. The format usually is a combination of centrally based and school-based services. Amelioration of the full continuum…

Viewing Events in the Center-of-Mass System

ERIC Educational Resources Information Center

Ruby, Lawrence

2010-01-01

In elementary physics, collisions are usually studied by employing the conservation of momentum, and sometimes also the conservation of kinetic energy. However, in nuclear reactions, changes of mass that complicate the situation often occur. To illustrate the latter, we shall cite two examples of endoergic nuclear reactions, i.e., those for which…

Honing Human Rights in the L[subscript 2] Classroom: Pedagogical Possibilities Using Films

ERIC Educational Resources Information Center

Praveen, C.

2007-01-01

Developing an understanding about human rights documents, and an awareness of human rights institutions and mechanisms of protection have become especially significant in the 21st century. Several classroom strategies have hitherto been employed to practice and experience human rights behaviour. Usually topics on human rights is introduced through…

Employment and Other Income Sources Among Homeless Youth.

PubMed

Slesnick, Natasha; Zhang, Jing; Yilmazer, Tansel

2018-05-12

Homeless youth report high rates of unemployment. While homeless serving agencies usually offer employment services, most homeless youth are disengaged from homeless service agencies, and a limited number of studies have examined employment and other income sources among service disconnected youth. Our study examined income sources and change in income among service disconnected youth, all of whom received Strengths-Based Outreach and Advocacy (SBOA, N = 79). Findings revealed that over time employment and legal income from non-survival behaviors increased (e.g., governmental assistance and receiving income from friends and relatives), while income from survival behaviors decreased (e.g., prostitution, stealing, selling possessions, selling blood or plasma). Although unemployment among these youth remained high (62%), income from survival behaviors reduced most drastically. Findings also suggest that employment is linked to housing stability and mental health, as is substance use and income, which suggests that mental health, housing, and substance use treatment services are important components in income stabilization for homeless youth.

Gaussian Quadrature is an efficient method for the back-transformation in estimating the usual intake distribution when assessing dietary exposure.

PubMed

Dekkers, A L M; Slob, W

2012-10-01

In dietary exposure assessment, statistical methods exist for estimating the usual intake distribution from daily intake data. These methods transform the dietary intake data to normal observations, eliminate the within-person variance, and then back-transform the data to the original scale. We propose Gaussian Quadrature (GQ), a numerical integration method, as an efficient way of back-transformation. We compare GQ with six published methods. One method uses a log-transformation, while the other methods, including GQ, use a Box-Cox transformation. This study shows that, for various parameter choices, the methods with a Box-Cox transformation estimate the theoretical usual intake distributions quite well, although one method, a Taylor approximation, is less accurate. Two applications--on folate intake and fruit consumption--confirmed these results. In one extreme case, some methods, including GQ, could not be applied for low percentiles. We solved this problem by modifying GQ. One method is based on the assumption that the daily intakes are log-normally distributed. Even if this condition is not fulfilled, the log-transformation performs well as long as the within-individual variance is small compared to the mean. We conclude that the modified GQ is an efficient, fast and accurate method for estimating the usual intake distribution. Copyright © 2012 Elsevier Ltd. All rights reserved.

[Anesthetic infiltration of the spermatic cord in surgery for voluminous hydrocele].

PubMed

Reale, C; Corinti, R; Galullo, B; Borgonuovo, P; Borgonuovo, P

1998-06-01

The use of a new technique in spermatic cord block in surgical treatment of large hydroceles is reported. Identification of the cord in these cases is often difficult due to the presence of the hydrocele. The reported technique consists in the percutaneous drainage of the hydrocele prior to the block, in order to allow an easier identification of the cord. The block is then performed by the usual method. 108 patients with large hydroceles (above 250 mls) underwent surgical repair employing this approach. In only one case the cord was not identified even after drainage due to the effects of a previous hernioplasty. In the remaining 107 patients the cord was easily identified and blocked. The excellent results obtained with this approach, show that cord block is possible in all patients, even when a large hydrocele is present.

Illustrated review of new imaging techniques in the diagnosis of abdominal wall hernias.

PubMed

Toms, A P; Dixon, A K; Murphy, J M; Jamieson, N V

1999-10-01

The assessment of abdominal wall hernias has long been a clinical skill that only occasionally required the supplementary radiological assistance of herniography. However, with the advent of cross-sectional imaging, a new range of diagnostic tools is now available to help the clinician in difficult cases. This review explores the ability of computed tomography and magnetic resonance imaging to demonstrate many of the hernias encountered in the anterior abdominal wall. Also discussed is the role of imaging techniques in the management of a variety of hernias. Cross-sectional imaging techniques are being employed with increasing frequency for the assessment of hernias. Although the anatomical detail can usually be delineated clearly, the accuracy of the various methods and their place in the clinical management of hernias has yet to be fully determined.

Infrared and Raman spectroscopy study of AsS chalcogenide films prepared by plasma-enhanced chemical vapor deposition.

PubMed

Mochalov, Leonid; Dorosz, Dominik; Kudryashov, Mikhail; Nezhdanov, Aleksey; Usanov, Dmitry; Gogova, Daniela; Zelentsov, Sergey; Boryakov, Aleksey; Mashin, Alexandr

2018-03-15

AsS chalcogenide films, where As content is 60-40at.%, have been prepared via a RF non-equilibrium low-temperature argon plasma discharge, using volatile As and S as the precursors. Optical properties of the films were studied in UV-visible-NIR region in the range from 0.2 to 2.5μm. Infrared and Raman spectroscopy have been employed for the elucidation of the molecular structure of the newly developed material. It was established that PECVD films possess a higher degree of transparency (up to 80%) and a wider transparency window (>20μm) in comparison with the "usual" AsS thin films, prepared by different thermal methods, which is highly advantageous for certain applications. Copyright © 2017 Elsevier B.V. All rights reserved.

Decision Fusion with Channel Errors in Distributed Decode-Then-Fuse Sensor Networks

PubMed Central

Yan, Yongsheng; Wang, Haiyan; Shen, Xiaohong; Zhong, Xionghu

2015-01-01

Decision fusion for distributed detection in sensor networks under non-ideal channels is investigated in this paper. Usually, the local decisions are transmitted to the fusion center (FC) and decoded, and a fusion rule is then applied to achieve a global decision. We propose an optimal likelihood ratio test (LRT)-based fusion rule to take the uncertainty of the decoded binary data due to modulation, reception mode and communication channel into account. The average bit error rate (BER) is employed to characterize such an uncertainty. Further, the detection performance is analyzed under both non-identical and identical local detection performance indices. In addition, the performance of the proposed method is compared with the existing optimal and suboptimal LRT fusion rules. The results show that the proposed fusion rule is more robust compared to these existing ones. PMID:26251908

NMR analysis of the iron ligand ethylenediaminedi(o-hydroxyphenyl)acetic acid (EDDHA) employed in fertilizers.

PubMed

Cremonini, M A; Alvarez-Fernández, A; Lucena, J J; Rombolà, A; Marangoni, B; Placucci, G

2001-08-01

The exceptional efficiency of the iron chelate of ethylenediaminedi(o-hydroxyphenyl)acetic acid (o,o-EDDHA) in correcting iron chlorosis in plants and the medical applications of various metallic chelates of this compound have long been recognized. As commercial preparations of o,o-EDDHA usually contain impurities, a method for their detection is proposed. By using one- and two-dimensional nuclear magnetic resonance two impurities were identified. The structure of one of these compounds was assigned to an isomer of EDDHA containing at least one p-hydroxyphenyl moiety. The structure of the other impurity was tentatively assigned to a byproduct of the EDDHA synthesis: 2,6-di[CH(COOH)NHCH(2)CH(2)NHCH(COOH)Ar]phenol (Ar = hydroxyphenyl). Both compounds were also detected in the EDDHA extracted from a commercial iron fertilizer.

Argon recovery from hydrogen depleted ammonia plant purge gas using a HARP Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krishnamurthy, R.; Lerner, S.L.; Maclean, D.L.

1987-01-01

A number of ammonia plants employ membranes or cryogenic hydrogen recovery units to separate hydrogen contained in the purge gas for recycle to the ammonia synthesis loop. The resulting hydrogen depleted purge gas, which is usually used for fuel, is an attractive source of argon. This paper presents the novel features of a process which employs a combination of pressure swing adsorption (PSA) and cryogenic technology to separate the argon from this hydrogen depleted purge gas stream. This new proprietary Hybrid Argon Recovery Progress (HARP) plant is an effective alternative to a conventional all-cryogenic plant.

Artificial Boundary Conditions Based on the Difference Potentials Method

NASA Technical Reports Server (NTRS)

Tsynkov, Semyon V.

1996-01-01

While numerically solving a problem initially formulated on an unbounded domain, one typically truncates this domain, which necessitates setting the artificial boundary conditions (ABC's) at the newly formed external boundary. The issue of setting the ABC's appears to be most significant in many areas of scientific computing, for example, in problems originating from acoustics, electrodynamics, solid mechanics, and fluid dynamics. In particular, in computational fluid dynamics (where external problems present a wide class of practically important formulations) the proper treatment of external boundaries may have a profound impact on the overall quality and performance of numerical algorithms. Most of the currently used techniques for setting the ABC's can basically be classified into two groups. The methods from the first group (global ABC's) usually provide high accuracy and robustness of the numerical procedure but often appear to be fairly cumbersome and (computationally) expensive. The methods from the second group (local ABC's) are, as a rule, algorithmically simple, numerically cheap, and geometrically universal; however, they usually lack accuracy of computations. In this paper we first present a survey and provide a comparative assessment of different existing methods for constructing the ABC's. Then, we describe a relatively new ABC's technique of ours and review the corresponding results. This new technique, in our opinion, is currently one of the most promising in the field. It enables one to construct such ABC's that combine the advantages relevant to the two aforementioned classes of existing methods. Our approach is based on application of the difference potentials method attributable to V. S. Ryaben'kii. This approach allows us to obtain highly accurate ABC's in the form of certain (nonlocal) boundary operator equations. The operators involved are analogous to the pseudodifferential boundary projections first introduced by A. P. Calderon and then also studied by R. T. Seeley. The apparatus of the boundary pseudodifferential equations, which has formerly been used mostly in the qualitative theory of integral equations and PDE'S, is now effectively employed for developing numerical methods in the different fields of scientific computing.

MEDication reminder APPs to improve medication adherence in Coronary Heart Disease (MedApp-CHD) Study: a randomised controlled trial protocol.

PubMed

Santo, Karla; Chow, Clara K; Thiagalingam, Aravinda; Rogers, Kris; Chalmers, John; Redfern, Julie

2017-10-08

The growing number of smartphone health applications available in the app stores makes these apps a promising tool to help reduce the global problem of non-adherence to long-term medications. However, to date, there is limited evidence that available medication reminder apps are effective. This study aims to determine the impact of medication reminder apps on adherence to cardiovascular medication when compared with usual care for people with coronary heart disease (CHD) and to determine whether an advanced app compared with a basic app is associated with higher adherence. Randomised controlled trial with follow-up at 3 months to evaluate the feasibility and effectiveness of medication reminder apps on medication adherence compared with usual care. An estimated sample size of 156 patients with CHD will be randomised to one of three groups (usual care group, basic medication reminder app group and advanced medication reminder app group). The usual care group will receive standard care for CHD with no access to a medication reminder app. The basic medication reminder app group will have access to a medication reminder app with a basic feature of providing simple daily reminders with no interactivity. The advanced medication reminder app group will have access to a medication reminder app with additional interactive and customisable features. The primary outcome is medication adherence measured by the eight-item Morisky Medication Adherence Scale at 3 months. Secondary outcomes include clinical measurements of blood pressure and cholesterol levels, and medication knowledge. A process evaluation will also be performed to assess the feasibility of the intervention by evaluating the acceptability, utility and engagement with the apps. Ethical approval has been obtained from the Western Sydney Local Health Network Human Research Ethics Committee (AU/RED/HREC/1/WMEAD/3). Study findings will be disseminated via usual scientific forums. ACTRN12616000661471; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Evidence reasoning method for constructing conditional probability tables in a Bayesian network of multimorbidity.

PubMed

Du, Yuanwei; Guo, Yubin

2015-01-01

The intrinsic mechanism of multimorbidity is difficult to recognize and prediction and diagnosis are difficult to carry out accordingly. Bayesian networks can help to diagnose multimorbidity in health care, but it is difficult to obtain the conditional probability table (CPT) because of the lack of clinically statistical data. Today, expert knowledge and experience are increasingly used in training Bayesian networks in order to help predict or diagnose diseases, but the CPT in Bayesian networks is usually irrational or ineffective for ignoring realistic constraints especially in multimorbidity. In order to solve these problems, an evidence reasoning (ER) approach is employed to extract and fuse inference data from experts using a belief distribution and recursive ER algorithm, based on which evidence reasoning method for constructing conditional probability tables in Bayesian network of multimorbidity is presented step by step. A multimorbidity numerical example is used to demonstrate the method and prove its feasibility and application. Bayesian network can be determined as long as the inference assessment is inferred by each expert according to his/her knowledge or experience. Our method is more effective than existing methods for extracting expert inference data accurately and is fused effectively for constructing CPTs in a Bayesian network of multimorbidity.

Data Field Modeling and Spectral-Spatial Feature Fusion for Hyperspectral Data Classification.

PubMed

Liu, Da; Li, Jianxun

2016-12-16

Classification is a significant subject in hyperspectral remote sensing image processing. This study proposes a spectral-spatial feature fusion algorithm for the classification of hyperspectral images (HSI). Unlike existing spectral-spatial classification methods, the influences and interactions of the surroundings on each measured pixel were taken into consideration in this paper. Data field theory was employed as the mathematical realization of the field theory concept in physics, and both the spectral and spatial domains of HSI were considered as data fields. Therefore, the inherent dependency of interacting pixels was modeled. Using data field modeling, spatial and spectral features were transformed into a unified radiation form and further fused into a new feature by using a linear model. In contrast to the current spectral-spatial classification methods, which usually simply stack spectral and spatial features together, the proposed method builds the inner connection between the spectral and spatial features, and explores the hidden information that contributed to classification. Therefore, new information is included for classification. The final classification result was obtained using a random forest (RF) classifier. The proposed method was tested with the University of Pavia and Indian Pines, two well-known standard hyperspectral datasets. The experimental results demonstrate that the proposed method has higher classification accuracies than those obtained by the traditional approaches.

A novel method for separation of caseins from milk by phosphates precipitation.

PubMed

Yen, Chon-Ho; Lin, Yin-Shen; Tu, Ching-Fu

2015-01-01

Milk protein of farm animals is difficult to isolate because of the presence of casein micelles, which are hard to separate from whey by using centrifugation or filtration. Insoluble casein micelles also create an obstacle for purification instruments to operate efficiently. The conventional method, to precipitate caseins by lowering pH to 4.6 and then recover the whey fraction for further purification using chromatography techniques, is not applicable to proteins having an isoelectric point similar to caseins. In addition, the acid condition used for casein removal usually leads to significantly poor yields and reduced biological activities. In this study, a novel method of precipitating caseins under neutral or weak acidic conditions is presented. The method employs a phosphate salt and a freeze-thaw procedure to obtain a casein-free whey protein fraction. This fraction contains more than 90% yield with little loss of bioactivity of the target protein, and is readily available for further chromatographic purification. This method was successfully applied to purify recombinant human factor IX and recombinant hirudin from the milk of transgenic pigs in the presented study. It is an efficient pretreatment approach prior to chromatographic purification of milk protein from farm animals and particularly of great value to collect those recombinants secreted from transgenic livestock.

Note: Piezoelectric polymers as transducers for the ultrasonic-reflection method and the application in mechanical property-screening of coatings

NASA Astrophysics Data System (ADS)

Wegener, Michael; Oehler, Harald; Lellinger, Dirk; Alig, Ingo

2012-01-01

In the last years, non-destructive ultrasonic testing methods are more and more frequently employed in order to investigate the drying and curing processes of different coatings. Among them an ultrasonic reflection method was developed allowing the simultaneous measurement with longitudinal and transversal waves. In order to generate the ultrasonic pulse, piezoelectric ceramics or oxides are usually used as transducer materials which are connected to a delay line. Here, we demonstrate a similar approach for the ultrasonic reflection method installing piezoelectric polymers as ultrasonic transducer materials. In detail, poly(vinylidene fluoride and trifluoroethylene) [P(VDF-TrFE)] copolymers were prepared as piezoelectric transducer layers directly onto the metallization of glass delay lines avoiding additional bonding processes. The film preparation was carried out by solvent casting the polymer onto an area with a diameter of 12 mm and is optimized so that relatively homogeneous polymer layers with thicknesses between 14 and 35 μm are adjusted by the deposited amount of the polymer. Electrical poling renders the polymer piezoelectric. The ultrasonic properties of the P(VDF-TrFE) transducer and their usability for the ultrasonic reflection method are described also in comparison to previous measurements using LiNbO3 transducer.

Applications of neural networks in training science.

PubMed

Pfeiffer, Mark; Hohmann, Andreas

2012-04-01

Training science views itself as an integrated and applied science, developing practical measures founded on scientific method. Therefore, it demands consideration of a wide spectrum of approaches and methods. Especially in the field of competitive sports, research questions are usually located in complex environments, so that mainly field studies are drawn upon to obtain broad external validity. Here, the interrelations between different variables or variable sets are mostly of a nonlinear character. In these cases, methods like neural networks, e.g., the pattern recognizing methods of Self-Organizing Kohonen Feature Maps or similar instruments to identify interactions might be successfully applied to analyze data. Following on from a classification of data analysis methods in training-science research, the aim of the contribution is to give examples of varied sports in which network approaches can be effectually used in training science. First, two examples are given in which neural networks are employed for pattern recognition. While one investigation deals with the detection of sporting talent in swimming, the other is located in game sports research, identifying tactical patterns in team handball. The third and last example shows how an artificial neural network can be used to predict competitive performance in swimming. Copyright © 2011 Elsevier B.V. All rights reserved.

Accounting for large deformations in real-time simulations of soft tissues based on reduced-order models.

PubMed

Niroomandi, S; Alfaro, I; Cueto, E; Chinesta, F

2012-01-01

Model reduction techniques have shown to constitute a valuable tool for real-time simulation in surgical environments and other fields. However, some limitations, imposed by real-time constraints, have not yet been overcome. One of such limitations is the severe limitation in time (established in 500Hz of frequency for the resolution) that precludes the employ of Newton-like schemes for solving non-linear models as the ones usually employed for modeling biological tissues. In this work we present a technique able to deal with geometrically non-linear models, based on the employ of model reduction techniques, together with an efficient non-linear solver. Examples of the performance of the technique over some examples will be given. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Farm Safety

PubMed Central

Wilson, G. S.

1966-01-01

Accident and safety are related terms; the higher the accident rate in any industry, the greater is the need for safety measures designed to prevent accidents. This article discusses the accident and safety problems in agriculture, which includes horticulture and forestry. There is still a tendency among townspeople to think of the countryside as peaceful and tranquil, a place where nothing happens very quickly and far removed from violent death or crippling injury. This pleasant rustic picture has undergone a striking change in the last 30 years owing to considerable agricultural mechanization and the development of chemical pesticides, which have brought new dangers to those who live and work on the land. Although men have readily adapted themselves to new machines and methods, they have not proved as able to recognize new dangers and learn how to guard against them. In consequence, accidents have increased to such an extent that the whole industry has realized the need for positive preventive measures. In this country, it is generally accepted that an employer of labour has a responsibility to provide safe working conditions for those he employs. Farm safety legislation goes a little further and usually requires an employer to provide necessary safeguards, with the added requirement on a worker to make use of them. It is a feature of accident prevention work that it never reaches a stage when it can be regarded as complete. Even when a reduction in accidents has been achieved, the effort must be sustained or the trend will be quickly reversed. Images PMID:5904095

A PFM-based MWIR DROIC employing off-pixel fine conversion of photocharge to digital using integrated column ADCs

NASA Astrophysics Data System (ADS)

Abbasi, S.; Galioglu, A.; Shafique, A.; Ceylan, O.; Yazici, M.; Gurbuz, Y.

2017-02-01

A 32x32 prototype of a digital readout IC (DROIC) for medium-wave infrared focal plane arrays (MWIR IR-FPAs) is presented. The DROIC employs in-pixel photocurrent to digital conversion based on a pulse frequency modulation (PFM) loop and boasts a novel feature of off-pixel residue conversion using 10-bit column SAR ADCs. The remaining charge at the end of integration in typical PFM based digital pixel sensors is usually wasted. Previous works employing in-pixel extended counting methods make use of extra memory and counters to convert this left-over charge to digital, thereby performing fine conversion of the incident photocurrent. This results in a low quantization noise and hence keeps the readout noise low. However, focal plane arrays (FPAs) with small pixel pitch are constrained in pixel area, which makes it difficult to benefit from in-pixel extended counting circuitry. Thus, in this work, a novel approach to measure the residue outside the pixel using column -parallel SAR ADCs has been proposed. Moreover, a modified version of the conventional PFM based pixel has been designed to help hold the residue charge and buffer it to the column ADC. In addition to the 2D array of pixels, the prototype consists of 32 SAR ADCs, a timing controller block and a memory block to buffer the residue data coming out of the ADCs. The prototype has been designed and fabricated in 90nm CMOS.

Autistic characteristics in adults with epilepsy and perceived seizure activity.

PubMed

Wakeford, SallyAnn; Hinvest, Neal; Ring, Howard; Brosnan, Mark

2015-11-01

The prevalence of autism spectrum disorders in epilepsy is approximately 15%-47%, with previous research by Wakeford and colleagues reporting higher autistic traits in adults with epilepsy. The aim of this study was to investigate autistic characteristics and their relationship to having seizures by employing two behavioral assessments in two samples: adults with epilepsy and controls. The study employed the Social Responsiveness Scale - Shortened (SRS-S) (patients with epilepsy (n=76), control (n=19)) and the brief Repetitive Behavior Scale - Revised (RBS-R) (patients with epilepsy (n=47), control (n=21)). This study employed a unique method to quantify the extent to which autistic characteristics are related to perceived mild seizure activity. Adults with epilepsy were instructed to rate their usual behavior on each assessment and, at the same time, rate their behavior again when they perceived that they were having mild seizure activity. Significantly higher SRS-S scores were related to having a diagnosis of epilepsy and were perceived by adults with epilepsy to increase during mild seizure activity. These scores positively correlated with antiepileptic drug control. No difference was found for RBS-R scores in adults with epilepsy compared with controls. Together, these results suggest that adults with epilepsy have higher autistic characteristics measured by the social responsiveness scale, while sameness behaviors remain unimpaired. The autistic characteristics measured by the social responsiveness scale were reported by adults with epilepsy to be more severe during their mild seizure activity. Copyright © 2015 Elsevier Inc. All rights reserved.

Integrated services and early intervention in the vocational rehabilitation of people with spinal cord injuries

PubMed Central

Bloom, Julia; Dorsett, Pat; McLennan, Vanette

2017-01-01

Introduction: The design was a narrative review. The objective of the study was to investigate the potential for early vocational rehabilitation (VR) interventions for people with spinal cord injury (SCI) in overcoming barriers in returning to work, and to pinpoint factors contributing to effectiveness in early VR intervention for this population. The setting was at Queensland, Australia. Materials and methods: Synthesis of the findings of a literature search of online databases ProQuest and CINAHL, using keywords relating to the employment situation and VR of people with SCI. Themes were identified and analysed in accordance with the research objectives. Results: Despite increasing government commitment to the workforce and social participation of people with disabilities, Australians living with SCI have significantly diminished employment outcomes compared with the general population. Current VR approaches usually do not commence until some months post discharge, potentially missing a window of opportunity to preserve pre-existing employment or assist in vocational decision making. The review found that there are opportunities for enhancing VR service provision following SCI, namely integrating the VR programme within the primary rehabilitation team thus facilitating early VR intervention. Discussion: Emerging evidence shows promising results for early intervention in VR; however, questions remain regarding ideal intervention approaches, and it is clear that further empirical investigation is required to support the use of early intervention models post SCI. The study was sponsored by Motor Accident Insurance Commission (MAIC). PMID:28382213

Supervised filters for EEG signal in naturally occurring epilepsy forecasting.

PubMed

Muñoz-Almaraz, Francisco Javier; Zamora-Martínez, Francisco; Botella-Rocamora, Paloma; Pardo, Juan

2017-01-01

Nearly 1% of the global population has Epilepsy. Forecasting epileptic seizures with an acceptable confidence level, could improve the disease treatment and thus the lifestyle of the people who suffer it. To do that the electroencephalogram (EEG) signal is usually studied through spectral power band filtering, but this paper proposes an alternative novel method of preprocessing the EEG signal based on supervised filters. Such filters have been employed in a machine learning algorithm, such as the K-Nearest Neighbor (KNN), to improve the prediction of seizures. The proposed solution extends with this novel approach an algorithm that was submitted to win the third prize of an international Data Science challenge promoted by Kaggle contest platform and the American Epilepsy Society, the Epilepsy Foundation, National Institutes of Health (NIH) and Mayo Clinic. A formal description of these preprocessing methods is presented and a detailed analysis in terms of Receiver Operating Characteristics (ROC) curve and Area Under ROC curve is performed. The obtained results show statistical significant improvements when compared with the spectral power band filtering (PBF) typical baseline. A trend between performance and the dataset size is observed, suggesting that the supervised filters bring better information, compared to the conventional PBF filters, as the dataset grows in terms of monitored variables (sensors) and time length. The paper demonstrates a better accuracy in forecasting when new filters are employed and its main contribution is in the field of machine learning algorithms to develop more accurate predictive systems.

Supervised filters for EEG signal in naturally occurring epilepsy forecasting

PubMed Central

2017-01-01

Nearly 1% of the global population has Epilepsy. Forecasting epileptic seizures with an acceptable confidence level, could improve the disease treatment and thus the lifestyle of the people who suffer it. To do that the electroencephalogram (EEG) signal is usually studied through spectral power band filtering, but this paper proposes an alternative novel method of preprocessing the EEG signal based on supervised filters. Such filters have been employed in a machine learning algorithm, such as the K-Nearest Neighbor (KNN), to improve the prediction of seizures. The proposed solution extends with this novel approach an algorithm that was submitted to win the third prize of an international Data Science challenge promoted by Kaggle contest platform and the American Epilepsy Society, the Epilepsy Foundation, National Institutes of Health (NIH) and Mayo Clinic. A formal description of these preprocessing methods is presented and a detailed analysis in terms of Receiver Operating Characteristics (ROC) curve and Area Under ROC curve is performed. The obtained results show statistical significant improvements when compared with the spectral power band filtering (PBF) typical baseline. A trend between performance and the dataset size is observed, suggesting that the supervised filters bring better information, compared to the conventional PBF filters, as the dataset grows in terms of monitored variables (sensors) and time length. The paper demonstrates a better accuracy in forecasting when new filters are employed and its main contribution is in the field of machine learning algorithms to develop more accurate predictive systems. PMID:28632737

29 CFR 778.219 - Pay for foregoing holidays and vacations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... entitled, under his employment contract, to a week's paid vacation in the amount of his usual straight-time... total straight-time earnings for the week, and $240 in addition as his vacation pay. Under the statute... vacation pay will be measured by straight-time earnings for any agreed number of hours or days, or by total...

29 CFR 778.219 - Pay for foregoing holidays and vacations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... entitled, under his employment contract, to a week's paid vacation in the amount of his usual straight-time... total straight-time earnings for the week, and $240 in addition as his vacation pay. Under the statute... vacation pay will be measured by straight-time earnings for any agreed number of hours or days, or by total...

Twenty First Century Education: Transformative Education for Sustainability and Responsible Citizenship

ERIC Educational Resources Information Center

Bell, David V. J.

2016-01-01

Many ministries of education focus on twenty-first century education but unless they are looking at this topic through a sustainability lens, they will be missing some of its most important elements. The usual emphasis on developing skills for employability in the current global economy begs the question whether the global economy is itself…

76 FR 35072 - Proposed Guidance on Stress Testing for Banking Organizations With More Than $10 Billion in Total...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-15

... ensure that each is conceptually sound. Stress tests usually vary in design and complexity, including the... quantitative tests supported by high-quality data, employ a certain amount of expert or business judgment that... generally, enterprise-wide stress testing involves robust scenario design and effective translation of...

20 CFR 655.730 - What is the process for filing a labor condition application?

Code of Federal Regulations, 2010 CFR

2010-04-01

... employer to ETA in accordance with the procedure prescribed in § 655.720 no earlier than six months before... responsibility to ensure ETA receives a complete and accurate LCA. Incomplete or obviously inaccurate LCAs will not be certified by ETA. ETA will process all LCAs sequentially and will usually make a determination...

Job Outlook Information: Careers for the Future. InfoSeries.

ERIC Educational Resources Information Center

Indiana Career and Postsecondary Advancement Center, Bloomington.

Job outlook information forecasts the growth and decline of jobs in the near future--usually for a 10-year period. The purpose of this information is to help individuals understand where future employment opportunities may occur, but the individual must also consider his/her skills and interests and the level of education needed to accomplish…

Embedded, real-time UAV control for improved, image-based 3D scene reconstruction

Treesearch

Jean Liénard; Andre Vogs; Demetrios Gatziolis; Nikolay Strigul

2016-01-01

Unmanned Aerial Vehicles (UAVs) are already broadly employed for 3D modeling of large objects such as trees and monuments via photogrammetry. The usual workflow includes two distinct steps: image acquisition with UAV and computationally demanding postflight image processing. Insufficient feature overlaps across images is a common shortcoming in post-flight image...

Being a Girl Mathematician: Diversity of Positive Mathematical Identities in a Secondary Classroom

ERIC Educational Resources Information Center

Radovic, Darinka; Black, Laura; Salas, Christian E.; Williams, Julian

2017-01-01

The construction of positive mathematical identities (MIs) is a complex and central issue in school mathematics, where girls are usually "counted out" of the field. This study explores positive MIs (high achiever and positive relationship with mathematics) of 3 girls. We employed a nested model of identity based on a case study approach…

48 CFR Appendix D to Chapter 7 - Direct USAID Contracts With a U.S. Citizen or a U.S. Resident Alien for Personal Services Abroad

Code of Federal Regulations, 2011 CFR

2011-10-01

..., make the contractor personnel appear, in effect, Government employees (see FAR 37.104). (2) Employer... the supervision and control usually prevailing in relationships between the Government and its employees. (4) Independent contractor relationship means a contract relationship in which the contractor is...

Safety Planning Intervention: A Brief Intervention to Mitigate Suicide Risk

ERIC Educational Resources Information Center

Stanley, Barbara; Brown, Gregory K.

2012-01-01

The usual care for suicidal patients who are seen in the emergency department (ED) and other emergency settings is to assess level of risk and refer to the appropriate level of care. Brief psychosocial interventions such as those administered to promote lower alcohol intake or to reduce domestic violence in the ED are not typically employed for…

Selected Topics in Experimental Statistics with Army Applications

DTIC Science & Technology

1983-12-01

could employ the sum indicated by ’t pjXij + f, as the model. 6-45 UM«OUIVI-K /Ub- IUd As is usual and for use in significance tests, we will...were taken from a study and classical example of Bortkiewicz (Ref. 40), which describes the number of deaths from kicks of horses in the Prussian Army

The Role of Sociocultural Mediational Tools in EFL Teachers' Development: Insights from a Life History Approach

ERIC Educational Resources Information Center

Mirzaee, Alireza; Aliakbari, Mohammad

2017-01-01

The sociocultural orientation in general education, which has gradually leaked into second language teacher education, argues that teachers usually employ social relations, cultural artefacts, and theoretical concepts to mediate their thinking and practice. Against this background, the present study aimed to explore how three male Iranian English…

Geometrical and optical calibration of a vehicle-mounted IR imager for land mine localization

NASA Astrophysics Data System (ADS)

Aitken, Victor C.; Russell, Kevin L.; McFee, John E.

2000-08-01

Many present day vehicle-mounted landmine detection systems use IR imagers. Information furnished by these imaging systems usually consists of video and the location of targets within the video. In multisensor systems employing data fusion, there is a need to convert sensor information to a common coordinate system that all sensors share.

Students with Disabilities in Higher Education: A Biographical-Narrative Approach to the Role of Lecturers

ERIC Educational Resources Information Center

Moriña Díez, Anabel; Gavira, Rosario López; Molina, Víctor M.

2015-01-01

This article presents an analysis of how lecturers respond to students with disabilities, the initial question being: do lecturers aid or hinder students? Findings pertain to a broader research project being developed by a multidisciplinary team employing a non-usual research methodology in higher education (HE) research and students with…

29 CFR 788.16 - Employment relationship.

Code of Federal Regulations, 2011 CFR

2011-07-01

... distinguished from a person who is engaged in a business of his own, is one who “follows the usual path of an employee” and is dependent on the business which he serves. As an aid in assessing the total situation the... these are: The extent to which the services rendered are an integral part of the principal's business...

Adequacy of usual dietary intake and nutritional status among pregnant women in the context of nutrition transition: the DEPOSIT Study.

PubMed

Abu-Saad, Kathleen; Shahar, Danit R; Fraser, Drora; Vardi, Hillel; Friger, Michael; Bolotin, Arkardy; Freedman, Laurence S

2012-11-28

Bedouin Arabs in southern Israel are a traditionally semi-nomadic population undergoing the nutrition transition in a context of urbanisation. The effect of these changes on the nutritional status of pregnant women is unknown. The Dietary Exposures and Pregnancy Outcomes in a Society In Transition (DEPOSIT) study evaluated the adequacy of pregnant Bedouin women's usual dietary intake and their nutritional status. Dietary intake was assessed in a cross-sectional study design using repeat 24 h recall (24HR) questionnaires. The National Cancer Institute method was used to estimate the usual intake of selected nutrients. The Estimated Average Requirement (EAR) was used to evaluate nutrient intake adequacy. Measured weight and height data were used to calculate the participants' BMI. A total of 1109 24HR were obtained from 683 participants, of which 8 % contained no animal-source protein and an additional 43 % contained no haeme-Fe. Animal-source protein intake reached less than half of the EAR for most participants (71 %). Over 90 % had inadequate intakes of Ca, Fe, animal-source Zn, vitamin A and folate. The probability of consuming haeme-source Fe was higher among urban than rural participants (OR 1·68, 95 % CI 1·17, 2·41), and among those with employed v. unemployed husbands (OR 1·81, 95 % CI 1·27, 2·58). Only 14 % reported consuming home-produced animal products. According to pre-pregnancy BMI, 42 % were overweight or obese. The DEPOSIT study findings suggest that Bedouin Arab women are in need of interventions that address the co-existing problems of inadequate nutrient intakes and increased risk of obesity.

Determinants of eating at local and western fast-food venues in an urban Asian population: a mixed methods approach.

PubMed

Naidoo, Nasheen; van Dam, Rob M; Ng, Sheryl; Tan, Chuen Seng; Chen, Shiqi; Lim, Jia Yi; Chan, Mei Fen; Chew, Ling; Rebello, Salome A

2017-05-25

Like several Southeast Asian countries, Singapore has a complex eating-out environment and a rising eating-out prevalence. However the determinants and drivers of eating-out in urban Asian environments are poorly understood. We examined the socio-demographic characteristics of persons who frequently ate away from home in local eateries called hawker centres and Western fast-food restaurants, using data from 1647 Singaporean adults participating in the National Nutrition Survey (NNS) 2010. We also assessed the underlying drivers of eating out and evaluated if these were different for eating at local eateries compared to Western fast-food restaurants using 18 focus group discussions of women (130 women). Participants reported a high eating-out frequency with 77.3% usually eating either breakfast, lunch or dinner at eateries. Main venues for eating-out included hawker centres (61.1% usually ate at least 1 of 3 daily meals at this venue) and school/workplace canteens (20.4%). A minority of participants (1.9%) reported usually eating at Western fast-food restaurants. Younger participants and those of Chinese and Malay ethnicity compared to Indians were more likely to eat at Western fast-food restaurants. Chinese and employed persons were more likely to eat at hawker centres. The ready availability of a large variety of affordable and appealing foods appeared to be a primary driver of eating out, particularly at hawker centres. Our findings highlight the growing importance of eating-out in an urban Asian population where local eating venues play a more dominant role compared with Western fast-food chains. Interventions focusing on improving the food quality at venues for eating out are important to improve the diet of urban Asian populations.

Awareness and Perceptions of Emergency Contraceptive Pills Among Women in Kinshasa, Democratic Republic of the Congo.

PubMed

Hernandez, Julie H; Muanda, Mbadu; Garcia, Mélissa; Matawa, Grace

2017-09-01

Despite the commitment of the Democratic Republic of the Congo (DRC) to expand the family planning method mix and increase access to services, awareness of emergency contraception is low among women, and the method remains underused and poorly integrated in family planning programming. Data from 15 focus group discussions conducted in 2016 among women aged 15-35 were used to examine awareness and perceptions of, and attitudes toward, emergency contraceptives. After facilitators explained emergency contraceptive pills' mechanism of action and other characteristics, participants were asked about the potential benefits and risks of making the method more widely available. Transcripts were analyzed using an iterative approach. Women reported employing a wide range of postcoital contraceptive behaviors, albeit often using inappropriate products, and generally agreed that emergency contraceptive pills seemed to be a potentially effective solution to their family planning needs. Perceived benefits and limitations of the method were almost always framed in reference to other, better-known contraceptives, and women expressed strong preferences for pharmacy-based provision that aligned with their usual behaviors for obtaining contraceptives. Participants were reluctant to see the method available for free. Emergency contraceptive pills have the potential to address gaps in the family planning method mix in the DRC. Assessing whether women have incomplete or erroneous information about family planning methods can provide better understanding of women's contraceptive choices in low-income countries.

Theoretical study of the incompressible Navier-Stokes equations by the least-squares method

NASA Technical Reports Server (NTRS)

Jiang, Bo-Nan; Loh, Ching Y.; Povinelli, Louis A.

1994-01-01

Usually the theoretical analysis of the Navier-Stokes equations is conducted via the Galerkin method which leads to difficult saddle-point problems. This paper demonstrates that the least-squares method is a useful alternative tool for the theoretical study of partial differential equations since it leads to minimization problems which can often be treated by an elementary technique. The principal part of the Navier-Stokes equations in the first-order velocity-pressure-vorticity formulation consists of two div-curl systems, so the three-dimensional div-curl system is thoroughly studied at first. By introducing a dummy variable and by using the least-squares method, this paper shows that the div-curl system is properly determined and elliptic, and has a unique solution. The same technique then is employed to prove that the Stokes equations are properly determined and elliptic, and that four boundary conditions on a fixed boundary are required for three-dimensional problems. This paper also shows that under four combinations of non-standard boundary conditions the solution of the Stokes equations is unique. This paper emphasizes the application of the least-squares method and the div-curl method to derive a high-order version of differential equations and additional boundary conditions. In this paper, an elementary method (integration by parts) is used to prove Friedrichs' inequalities related to the div and curl operators which play an essential role in the analysis.

Parameter Estimation of Partial Differential Equation Models.

PubMed

Xun, Xiaolei; Cao, Jiguo; Mallick, Bani; Carroll, Raymond J; Maity, Arnab

2013-01-01

Partial differential equation (PDE) models are commonly used to model complex dynamic systems in applied sciences such as biology and finance. The forms of these PDE models are usually proposed by experts based on their prior knowledge and understanding of the dynamic system. Parameters in PDE models often have interesting scientific interpretations, but their values are often unknown, and need to be estimated from the measurements of the dynamic system in the present of measurement errors. Most PDEs used in practice have no analytic solutions, and can only be solved with numerical methods. Currently, methods for estimating PDE parameters require repeatedly solving PDEs numerically under thousands of candidate parameter values, and thus the computational load is high. In this article, we propose two methods to estimate parameters in PDE models: a parameter cascading method and a Bayesian approach. In both methods, the underlying dynamic process modeled with the PDE model is represented via basis function expansion. For the parameter cascading method, we develop two nested levels of optimization to estimate the PDE parameters. For the Bayesian method, we develop a joint model for data and the PDE, and develop a novel hierarchical model allowing us to employ Markov chain Monte Carlo (MCMC) techniques to make posterior inference. Simulation studies show that the Bayesian method and parameter cascading method are comparable, and both outperform other available methods in terms of estimation accuracy. The two methods are demonstrated by estimating parameters in a PDE model from LIDAR data.

School-to-work program participation and the post-high school employment of young adults with disabilities

PubMed Central

Shandra, Carrie L.; Hogan, Dennis P.

2014-01-01

Previous research on the education-to-employment transition for students with disabilities has suggested that participation in school-to-work programs is positively associated with post-high school success. This article utilizes data from the National Longitudinal Survey of Youth 1997 (NLSY97) to extend these findings in several ways. First, we assess the efficacy of specific types of school-based and work-based initiatives, including job shadowing, mentoring, cooperative education, school-sponsored enterprise, technical preparation, internships, and career major. Next, we extend the usual focus on the employment outcomes of work status and financial compensation to consider job-specific information on the receipt of fringe benefits. Overall, results from longitudinal multivariate analyses suggest that transition initiatives are effective in facilitating vocational success for this population; however, different aspects of school-to-work programs are beneficial for different aspects of employment. School-based programs are positively associated with stable employment and full-time work while work-based programs most consistently increase the likelihood that youth with disabilities will be employed in jobs that provide fringe benefits. Analyses also indicate that – once individuals with disabilities are stably employed – they can be employed in “good” jobs that provide employee benefits. PMID:25309111

The effectiveness of skills training for improving outcomes in supported employment.

PubMed

Mueser, Kim T; Aalto, Steve; Becker, Deborah R; Ogden, John S; Wolfe, Rosemarie S; Schiavo, Diane; Wallace, Charles J; Xie, Haiyi

2005-10-01

This study evaluated whether a supplementary skills training program improved work outcomes for clients enrolled in supported employment programs. Thirty-five recently employed clients with severe mental illness who were receiving supported employment services at a free-standing agency were randomly assigned to participate in either the workplace fundamentals program, a skills training program designed to make work more "successful and satisfying," or treatment as usual. Knowledge of workplace fundamentals (for example, identifying workplace stressors, problem solving, and improving job performance) was assessed at baseline and at nine months; employment outcomes and use of additional vocational services were tracked for 18 months. Clients in the workplace fundamentals group (N=17) improved more in knowledge of workplace fundamentals than those in the control group (N=18) at the nine-month follow-up, but the two groups did not differ in the number of hours or days worked, salary earned, or receipt of additional vocational services over the 18-month period. In general, clients in this study had higher educational levels and better employment outcomes than clients in most previous studies of supported employment, making it difficult to detect possible effects of the skills training intervention on work. Supplementary skills training did not improve work outcomes for clients who were receiving supported employment.

anisotropic microseismic focal mechanism inversion by waveform imaging matching

NASA Astrophysics Data System (ADS)

Wang, L.; Chang, X.; Wang, Y.; Xue, Z.

2016-12-01

The focal mechanism is one of the most important parameters in source inversion, for both natural earthquakes and human-induced seismic events. It has been reported to be useful for understanding stress distribution and evaluating the fracturing effect. The conventional focal mechanism inversion method picks the first arrival waveform of P wave. This method assumes the source as a Double Couple (DC) type and the media isotropic, which is usually not the case for induced seismic focal mechanism inversion. For induced seismic events, the inappropriate source and media model in inversion processing, by introducing ambiguity or strong simulation errors, will seriously reduce the inversion effectiveness. First, the focal mechanism contains significant non-DC source type. Generally, the source contains three components: DC, isotropic (ISO) and the compensated linear vector dipole (CLVD), which makes focal mechanisms more complicated. Second, the anisotropy of media will affect travel time and waveform to generate inversion bias. The common way to describe focal mechanism inversion is based on moment tensor (MT) inversion which can be decomposed into the combination of DC, ISO and CLVD components. There are two ways to achieve MT inversion. The wave-field migration method is applied to achieve moment tensor imaging. This method can construct elements imaging of MT in 3D space without picking the first arrival, but the retrieved MT value is influenced by imaging resolution. The full waveform inversion is employed to retrieve MT. In this method, the source position and MT can be reconstructed simultaneously. However, this method needs vast numerical calculation. Moreover, the source position and MT also influence each other in the inversion process. In this paper, the waveform imaging matching (WIM) method is proposed, which combines source imaging with waveform inversion for seismic focal mechanism inversion. Our method uses the 3D tilted transverse isotropic (TTI) elastic wave equation to approximate wave propagating in anisotropic media. First, a source imaging procedure is employed to obtain the source position. Second, we refine a waveform inversion algorithm to retrieve MT. We also use a microseismic data set recorded in surface acquisition to test our method.

Selection of regularization parameter for l1-regularized damage detection

NASA Astrophysics Data System (ADS)

Hou, Rongrong; Xia, Yong; Bao, Yuequan; Zhou, Xiaoqing

2018-06-01

The l1 regularization technique has been developed for structural health monitoring and damage detection through employing the sparsity condition of structural damage. The regularization parameter, which controls the trade-off between data fidelity and solution size of the regularization problem, exerts a crucial effect on the solution. However, the l1 regularization problem has no closed-form solution, and the regularization parameter is usually selected by experience. This study proposes two strategies of selecting the regularization parameter for the l1-regularized damage detection problem. The first method utilizes the residual and solution norms of the optimization problem and ensures that they are both small. The other method is based on the discrepancy principle, which requires that the variance of the discrepancy between the calculated and measured responses is close to the variance of the measurement noise. The two methods are applied to a cantilever beam and a three-story frame. A range of the regularization parameter, rather than one single value, can be determined. When the regularization parameter in this range is selected, the damage can be accurately identified even for multiple damage scenarios. This range also indicates the sensitivity degree of the damage identification problem to the regularization parameter.

Scaling Semantic Graph Databases in Size and Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morari, Alessandro; Castellana, Vito G.; Villa, Oreste

In this paper we present SGEM, a full software system for accelerating large-scale semantic graph databases on commodity clusters. Unlike current approaches, SGEM addresses semantic graph databases by only employing graph methods at all the levels of the stack. On one hand, this allows exploiting the space efficiency of graph data structures and the inherent parallelism of graph algorithms. These features adapt well to the increasing system memory and core counts of modern commodity clusters. On the other hand, however, these systems are optimized for regular computation and batched data transfers, while graph methods usually are irregular and generate fine-grainedmore » data accesses with poor spatial and temporal locality. Our framework comprises a SPARQL to data parallel C compiler, a library of parallel graph methods and a custom, multithreaded runtime system. We introduce our stack, motivate its advantages with respect to other solutions and show how we solved the challenges posed by irregular behaviors. We present the result of our software stack on the Berlin SPARQL benchmarks with datasets up to 10 billion triples (a triple corresponds to a graph edge), demonstrating scaling in dataset size and in performance as more nodes are added to the cluster.« less

A method to evaluate utility for architectural comparisons for a campaign to explore the surface of Mars

NASA Astrophysics Data System (ADS)

Ward, Eric D.; Webb, Ryan R.; deWeck, Olivier L.

2016-11-01

There is a general consensus that Mars is the next high priority destination for human space exploration. There has been no lack of analysis and recommendations for human missions to Mars, including, for example, the NASA Design Reference Architectures and the Mars Direct proposal. These studies and others usually employ the traditional approach of selecting a baseline mission architecture and running individual trade studies. However, this can cause blind spots, as not all combinations are explored. An alternative approach is to holistically analyze the entire architectural trade-space such that all of the possible system interactions are identified and measured. In such a framework, an optimal design is sought by minimizing cost for maximal value. While cost is relatively easy to model for manned spaceflight, value is more difficult to define. In our efforts to develop a surface base architecture for the MIT Mars 2040 project, we explored several methods for quantifying value, including technology development benefits, challenge, and various metrics for measuring scientific return. We developed a science multi-score method that combines astrobiology and geologic research goals, which is weighted by the crew-member hours that can be used for scientific research rather than other activities.

Protein Sequence Classification with Improved Extreme Learning Machine Algorithms

PubMed Central

2014-01-01

Precisely classifying a protein sequence from a large biological protein sequences database plays an important role for developing competitive pharmacological products. Comparing the unseen sequence with all the identified protein sequences and returning the category index with the highest similarity scored protein, conventional methods are usually time-consuming. Therefore, it is urgent and necessary to build an efficient protein sequence classification system. In this paper, we study the performance of protein sequence classification using SLFNs. The recent efficient extreme learning machine (ELM) and its invariants are utilized as the training algorithms. The optimal pruned ELM is first employed for protein sequence classification in this paper. To further enhance the performance, the ensemble based SLFNs structure is constructed where multiple SLFNs with the same number of hidden nodes and the same activation function are used as ensembles. For each ensemble, the same training algorithm is adopted. The final category index is derived using the majority voting method. Two approaches, namely, the basic ELM and the OP-ELM, are adopted for the ensemble based SLFNs. The performance is analyzed and compared with several existing methods using datasets obtained from the Protein Information Resource center. The experimental results show the priority of the proposed algorithms. PMID:24795876

Temporally-aware algorithms for the classification of anuran sounds.

PubMed

Luque, Amalia; Romero-Lemos, Javier; Carrasco, Alejandro; Gonzalez-Abril, Luis

2018-01-01

Several authors have shown that the sounds of anurans can be used as an indicator of climate change. Hence, the recording, storage and further processing of a huge number of anuran sounds, distributed over time and space, are required in order to obtain this indicator. Furthermore, it is desirable to have algorithms and tools for the automatic classification of the different classes of sounds. In this paper, six classification methods are proposed, all based on the data-mining domain, which strive to take advantage of the temporal character of the sounds. The definition and comparison of these classification methods is undertaken using several approaches. The main conclusions of this paper are that: (i) the sliding window method attained the best results in the experiments presented, and even outperformed the hidden Markov models usually employed in similar applications; (ii) noteworthy overall classification performance has been obtained, which is an especially striking result considering that the sounds analysed were affected by a highly noisy background; (iii) the instance selection for the determination of the sounds in the training dataset offers better results than cross-validation techniques; and (iv) the temporally-aware classifiers have revealed that they can obtain better performance than their non-temporally-aware counterparts.

Temporally-aware algorithms for the classification of anuran sounds

PubMed Central

Gonzalez-Abril, Luis

2018-01-01

Several authors have shown that the sounds of anurans can be used as an indicator of climate change. Hence, the recording, storage and further processing of a huge number of anuran sounds, distributed over time and space, are required in order to obtain this indicator. Furthermore, it is desirable to have algorithms and tools for the automatic classification of the different classes of sounds. In this paper, six classification methods are proposed, all based on the data-mining domain, which strive to take advantage of the temporal character of the sounds. The definition and comparison of these classification methods is undertaken using several approaches. The main conclusions of this paper are that: (i) the sliding window method attained the best results in the experiments presented, and even outperformed the hidden Markov models usually employed in similar applications; (ii) noteworthy overall classification performance has been obtained, which is an especially striking result considering that the sounds analysed were affected by a highly noisy background; (iii) the instance selection for the determination of the sounds in the training dataset offers better results than cross-validation techniques; and (iv) the temporally-aware classifiers have revealed that they can obtain better performance than their non-temporally-aware counterparts. PMID:29740517

Equilibrium sampling by reweighting nonequilibrium simulation trajectories

NASA Astrophysics Data System (ADS)

Yang, Cheng; Wan, Biao; Xu, Shun; Wang, Yanting; Zhou, Xin

2016-03-01

Based on equilibrium molecular simulations, it is usually difficult to efficiently visit the whole conformational space of complex systems, which are separated into some metastable regions by high free energy barriers. Nonequilibrium simulations could enhance transitions among these metastable regions and then be applied to sample equilibrium distributions in complex systems, since the associated nonequilibrium effects can be removed by employing the Jarzynski equality (JE). Here we present such a systematical method, named reweighted nonequilibrium ensemble dynamics (RNED), to efficiently sample equilibrium conformations. The RNED is a combination of the JE and our previous reweighted ensemble dynamics (RED) method. The original JE reproduces equilibrium from lots of nonequilibrium trajectories but requires that the initial distribution of these trajectories is equilibrium. The RED reweights many equilibrium trajectories from an arbitrary initial distribution to get the equilibrium distribution, whereas the RNED has both advantages of the two methods, reproducing equilibrium from lots of nonequilibrium simulation trajectories with an arbitrary initial conformational distribution. We illustrated the application of the RNED in a toy model and in a Lennard-Jones fluid to detect its liquid-solid phase coexistence. The results indicate that the RNED sufficiently extends the application of both the original JE and the RED in equilibrium sampling of complex systems.

A sparse grid based method for generative dimensionality reduction of high-dimensional data

NASA Astrophysics Data System (ADS)

Bohn, Bastian; Garcke, Jochen; Griebel, Michael

2016-03-01

Generative dimensionality reduction methods play an important role in machine learning applications because they construct an explicit mapping from a low-dimensional space to the high-dimensional data space. We discuss a general framework to describe generative dimensionality reduction methods, where the main focus lies on a regularized principal manifold learning variant. Since most generative dimensionality reduction algorithms exploit the representer theorem for reproducing kernel Hilbert spaces, their computational costs grow at least quadratically in the number n of data. Instead, we introduce a grid-based discretization approach which automatically scales just linearly in n. To circumvent the curse of dimensionality of full tensor product grids, we use the concept of sparse grids. Furthermore, in real-world applications, some embedding directions are usually more important than others and it is reasonable to refine the underlying discretization space only in these directions. To this end, we employ a dimension-adaptive algorithm which is based on the ANOVA (analysis of variance) decomposition of a function. In particular, the reconstruction error is used to measure the quality of an embedding. As an application, the study of large simulation data from an engineering application in the automotive industry (car crash simulation) is performed.

Equilibrium sampling by reweighting nonequilibrium simulation trajectories.

PubMed

Yang, Cheng; Wan, Biao; Xu, Shun; Wang, Yanting; Zhou, Xin

2016-03-01

Based on equilibrium molecular simulations, it is usually difficult to efficiently visit the whole conformational space of complex systems, which are separated into some metastable regions by high free energy barriers. Nonequilibrium simulations could enhance transitions among these metastable regions and then be applied to sample equilibrium distributions in complex systems, since the associated nonequilibrium effects can be removed by employing the Jarzynski equality (JE). Here we present such a systematical method, named reweighted nonequilibrium ensemble dynamics (RNED), to efficiently sample equilibrium conformations. The RNED is a combination of the JE and our previous reweighted ensemble dynamics (RED) method. The original JE reproduces equilibrium from lots of nonequilibrium trajectories but requires that the initial distribution of these trajectories is equilibrium. The RED reweights many equilibrium trajectories from an arbitrary initial distribution to get the equilibrium distribution, whereas the RNED has both advantages of the two methods, reproducing equilibrium from lots of nonequilibrium simulation trajectories with an arbitrary initial conformational distribution. We illustrated the application of the RNED in a toy model and in a Lennard-Jones fluid to detect its liquid-solid phase coexistence. The results indicate that the RNED sufficiently extends the application of both the original JE and the RED in equilibrium sampling of complex systems.

Methods of appointment and qualifications of club doctors and physiotherapists in English professional football: some problems and issues.

PubMed

Waddington, I; Roderick, M; Naik, R

2001-02-01

To examine the methods of appointment, experience, and qualifications of club doctors and physiotherapists in professional football. Semistructured tape recorded interviews with 12 club doctors, 10 club physiotherapists, and 27 current and former players. A questionnaire was also sent to 90 club doctors; 58 were returned. In almost all clubs, methods of appointment of doctors are informal and reflect poor employment practice: posts are rarely advertised and many doctors are appointed on the basis of personal contacts and without interview. Few club doctors had prior experience or qualifications in sports medicine and very few have a written job description. The club doctor is often not consulted about the appointment of the physiotherapist; physiotherapists are usually appointed informally, often without interview, and often by the manager without involving anyone who is qualified in medicine or physiotherapy. Half of all clubs do not have a qualified (chartered) physiotherapist; such unqualified physiotherapists are in a weak position to resist threats to their clinical autonomy, particularly those arising from managers' attempts to influence clinical decisions. Almost all aspects of the appointment of club doctors and physiotherapists need careful re-examination.

Two-photon fluorescence imaging super-enhanced by multishell nanophotonic particles, with application to subcellular pH.

PubMed

Ray, Aniruddha; Lee, Yong-Eun Koo; Kim, Gwangseong; Kopelman, Raoul

2012-07-23

A novel nanophotonic method for enhancing the two-photon fluorescence signal of a fluorophore is presented. It utilizes the second harmonic (SH) of the exciting light generated by noble metal nanospheres in whose near-field the dye molecules are placed, to further enhance the dye's fluorescence signal in addition to the usual metal-enhanced fluorescence phenomenon. This method enables demonstration, for the first time, of two-photon fluorescence enhancement inside a biological system, namely live cells. A multishell hydrogel nanoparticle containing a silver core, a protective citrate capping, which serves also as an excitation quenching inhibitor spacer, a pH indicator dye shell, and a polyacrylamide cladding are employed. Utilizing this technique, an enhancement of up to 20 times in the two-photon fluorescence of the indicator dye is observed. Although a significant portion of the enhanced fluorescence signal is due to one-photon processes accompanying the SH generation of the exciting light, this method preserves all the advantages of infrared-excited, two-photon microscopy: enhanced penetration depth, localized excitation, low photobleaching, low autofluorescence, and low cellular damage. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Large-scale Exploration of Neuronal Morphologies Using Deep Learning and Augmented Reality.

PubMed

Li, Zhongyu; Butler, Erik; Li, Kang; Lu, Aidong; Ji, Shuiwang; Zhang, Shaoting

2018-02-12

Recently released large-scale neuron morphological data has greatly facilitated the research in neuroinformatics. However, the sheer volume and complexity of these data pose significant challenges for efficient and accurate neuron exploration. In this paper, we propose an effective retrieval framework to address these problems, based on frontier techniques of deep learning and binary coding. For the first time, we develop a deep learning based feature representation method for the neuron morphological data, where the 3D neurons are first projected into binary images and then learned features using an unsupervised deep neural network, i.e., stacked convolutional autoencoders (SCAEs). The deep features are subsequently fused with the hand-crafted features for more accurate representation. Considering the exhaustive search is usually very time-consuming in large-scale databases, we employ a novel binary coding method to compress feature vectors into short binary codes. Our framework is validated on a public data set including 58,000 neurons, showing promising retrieval precision and efficiency compared with state-of-the-art methods. In addition, we develop a novel neuron visualization program based on the techniques of augmented reality (AR), which can help users take a deep exploration of neuron morphologies in an interactive and immersive manner.

A new method for overhead drilling.

PubMed

Rempel, David; Star, Demetra; Barr, Alan; Gibbons, Billy; Janowitz, Ira

2009-12-01

In the construction sector, overhead drilling into concrete or metal ceilings is a strenuous task associated with shoulder, neck and back musculoskeletal disorders due to the large applied forces and awkward arm postures. Two intervention devices, an inverted drill press and a foot lever design, were developed then compared to the usual method by construction workers performing their normal overhead drilling activities (n = 14). While the intervention devices were rated as less fatiguing than the usual method, their ratings on usability measures were worse than the usual method. The study demonstrates that the intervention devices can reduce fatigue; however, additional modifications are necessary in order to improve usability and productivity. Devices designed to improve workplace safety may need to undergo several rounds of field testing and modification prior to implementation.

Determinants of arbuscular mycorrhizal communities - soil properties or land use?

NASA Astrophysics Data System (ADS)

Jansa, J.; Erb, A.; Oberholzer, H.-R.; Šmilauer, P.; Egli, S.

2012-04-01

Arbuscular mycorrhizal (AM) fungi accompanied terrestrial plants since some 500 million years of their evolution and are now widespread in all continents and virtually all soils of the world. They establish symbiotic interactions with a majority of extant higher plant species including most economically important plants. They are heavily implicated in plant nutrition, plant-soil carbon cycling, and tolerance to environmental stresses. Under field conditions, AM fungi usually form multispecies communities both in the soils and in plant roots, and it is becoming well established that various human interventions like cropping, crop rotation, tillage, and fertilization may all drive changes in the community composition of these fungi and, consequently, in the symbiotic benefits to the plants. Most of current evidence is stemming from individual short and long-term field trials, and the different studies usually employed diverse approaches, limiting the comparability of results across sites. Large scale sampling designs using unified research methods across different soil types and land use systems have hardly been employed so far. However, this would be imperative to allow direct comparisons of the effects of various environmental conditions (soil type, climate) and human land use practices on the indigenous soil-borne symbiotic microbes in general and the AM fungi in particular. To contribute to filling this gap, we conducted molecular profiling of AM communities in more than 150 Swiss agricultural soils, developed on a range of parent materials, covering a wide range of soil properties such as pH value, texture, carbon content and altitude, and including highly productive fields through alpine pastures. This study indicated strong correlations between AM fungal community patterns and features like soil pH and texture, as well as some consistent shifts in fungal communities due to specific aspects of land use like tillage or fertilization. These results thus appear to be of paramount importance for defining broadly valid thresholds in using AM communities as universal soil quality indicators. Expanding the current efforts on a global scale will be discussed.

A computational approach to candidate gene prioritization for X-linked mental retardation using annotation-based binary filtering and motif-based linear discriminatory analysis

PubMed Central

2011-01-01

Background Several computational candidate gene selection and prioritization methods have recently been developed. These in silico selection and prioritization techniques are usually based on two central approaches - the examination of similarities to known disease genes and/or the evaluation of functional annotation of genes. Each of these approaches has its own caveats. Here we employ a previously described method of candidate gene prioritization based mainly on gene annotation, in accompaniment with a technique based on the evaluation of pertinent sequence motifs or signatures, in an attempt to refine the gene prioritization approach. We apply this approach to X-linked mental retardation (XLMR), a group of heterogeneous disorders for which some of the underlying genetics is known. Results The gene annotation-based binary filtering method yielded a ranked list of putative XLMR candidate genes with good plausibility of being associated with the development of mental retardation. In parallel, a motif finding approach based on linear discriminatory analysis (LDA) was employed to identify short sequence patterns that may discriminate XLMR from non-XLMR genes. High rates (>80%) of correct classification was achieved, suggesting that the identification of these motifs effectively captures genomic signals associated with XLMR vs. non-XLMR genes. The computational tools developed for the motif-based LDA is integrated into the freely available genomic analysis portal Galaxy (http://main.g2.bx.psu.edu/). Nine genes (APLN, ZC4H2, MAGED4, MAGED4B, RAP2C, FAM156A, FAM156B, TBL1X, and UXT) were highlighted as highly-ranked XLMR methods. Conclusions The combination of gene annotation information and sequence motif-orientated computational candidate gene prediction methods highlight an added benefit in generating a list of plausible candidate genes, as has been demonstrated for XLMR. Reviewers: This article was reviewed by Dr Barbara Bardoni (nominated by Prof Juergen Brosius); Prof Neil Smalheiser and Dr Dustin Holloway (nominated by Prof Charles DeLisi). PMID:21668950

Cost-effectiveness of supported employment for veterans with spinal cord injuries.

PubMed

Sinnott, Patricia L; Joyce, Vilija; Su, Pon; Ottomanelli, Lisa; Goetz, Lance L; Wagner, Todd H

2014-07-01

To estimate the cost-effectiveness of a supported employment (SE) intervention that had been previously found effective in veterans with spinal cord injuries (SCIs). Cost-effectiveness analysis, using cost and quality-of-life data gathered in a trial of SE for veterans with SCI. SCI centers in the Veterans Health Administration. Subjects (N=157) who completed a study of SE in 6 SCI centers. Subjects were randomly assigned to the intervention of SE (n=81) or treatment as usual (n=76). A vocational rehabilitation program of SE for veterans with SCI. Costs and quality-adjusted life years, which were estimated from the Veterans Rand 36-Item Health Survey, extrapolated to Veterans Rand 6 Dimension utilities. Average cost for the SE intervention was $1821. In 1 year of follow-up, estimated total costs, including health care utilization and travel expenses, and average quality-adjusted life years were not significantly different between groups, suggesting the Spinal Cord Injury Vocational Integration Program intervention was not cost-effective compared with usual care. An intensive program of SE for veterans with SCI, which is more effective in achieving competitive employment, is not cost-effective after 1 year of follow-up. Longer follow-up and a larger study sample will be necessary to determine whether SE yields benefits and is cost-effective in the long run for a population with SCI. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Multivariate EMD and full spectrum based condition monitoring for rotating machinery

NASA Astrophysics Data System (ADS)

Zhao, Xiaomin; Patel, Tejas H.; Zuo, Ming J.

2012-02-01

Early assessment of machinery health condition is of paramount importance today. A sensor network with sensors in multiple directions and locations is usually employed for monitoring the condition of rotating machinery. Extraction of health condition information from these sensors for effective fault detection and fault tracking is always challenging. Empirical mode decomposition (EMD) is an advanced signal processing technology that has been widely used for this purpose. Standard EMD has the limitation in that it works only for a single real-valued signal. When dealing with data from multiple sensors and multiple health conditions, standard EMD faces two problems. First, because of the local and self-adaptive nature of standard EMD, the decomposition of signals from different sources may not match in either number or frequency content. Second, it may not be possible to express the joint information between different sensors. The present study proposes a method of extracting fault information by employing multivariate EMD and full spectrum. Multivariate EMD can overcome the limitations of standard EMD when dealing with data from multiple sources. It is used to extract the intrinsic mode functions (IMFs) embedded in raw multivariate signals. A criterion based on mutual information is proposed for selecting a sensitive IMF. A full spectral feature is then extracted from the selected fault-sensitive IMF to capture the joint information between signals measured from two orthogonal directions. The proposed method is first explained using simple simulated data, and then is tested for the condition monitoring of rotating machinery applications. The effectiveness of the proposed method is demonstrated through monitoring damage on the vane trailing edge of an impeller and rotor-stator rub in an experimental rotor rig.

Development of an in vitro Bioassay for Recombinant Human Erythropoietin (rHuEPO) Based on Proliferative Stimulation of an Erythroid Cell Line and Analysis of Sialic Acid Dependent Microheterogeneity: UT-7 Cell Bioassay.

PubMed

Metta, Manoj Kumar; Malkhed, Vasavi; Tantravahi, Srinivasan; Vuruputuri, Uma; Kunaparaju, Rajkumar

2017-04-01

Determination of biological activity and its comparison with clinical behavior is important in the quality assessment of therapeutic glycoproteins. In vivo studies are usually employed for evaluating bioactivity of these glycomolecules. However, alternative methods are required to simplify the bioassay and avoid ethical issues associated with in vivo studies. Negatively charged sialic acid residues are known to be critical for in vivo bioactivity of rHuEPO. To address this need, we employed the human acute myeloid leukemia cell line UT-7 for the determination of proliferative stimulation induced by rHuEPO. Relative potencies of various intact and sugar-trimmed rHuEPO preparations were estimated using the International Standard for Human r-DNA derived EPO (87/684) as a reference for bioactivity. The cellular response was measured with a multi-channel photometer using a colorimetric microassay, based on the metabolism of the Resazurin sodium by cell viability. For a resourceful probing of physiological features of rHuEPO with significance, we obtained partly or completely desialylated rHuEPO digested by the neuraminidase enzyme without degradation of carbohydrates. Two-fold higher specific activity was shown by asialoerythropoietin in in vitro analysis compared with the sialoerythropoietin. Further, computational studies were also carried out to construct the 3D model of the erythropoietin (EPO) protein structure using standard comparative modeling methods. The quality of the model was validated using Procheck and protein structure analysis (ProSA) server tools. N-glycan units were constructed; moreover, EPO protein was glycosylated at potential glycosylation amino acid residue sites. The method described should be suitable for potency assessments of pharmaceutical formulations of rHuEPO (European Pharmacopeia, 2016).

Stature in archeological samples from central Italy: methodological issues and diachronic changes.

PubMed

Giannecchini, Monica; Moggi-Cecchi, Jacopo

2008-03-01

Stature reconstructions from skeletal remains are usually obtained through regression equations based on the relationship between height and limb bone length. Different equations have been employed to reconstruct stature in skeletal samples, but this is the first study to provide a systematic analysis of the reliability of the different methods for Italian historical samples. Aims of this article are: 1) to analyze the reliability of different regression methods to estimate stature for populations living in Central Italy from the Iron Age to Medieval times; 2) to search for trends in stature over this time period by applying the most reliable regression method. Long bone measurements were collected from 1,021 individuals (560 males, 461 females), from 66 archeological sites for males and 54 for females. Three time periods were identified: Iron Age, Roman period, and Medieval period. To determine the most appropriate equation to reconstruct stature the Delta parameter of Gini (Memorie di metodologia statistica. Milano: Giuffre A. 1939), in which stature estimates derived from different limb bones are compared, was employed. The equations proposed by Pearson (Philos Trans R Soc London 192 (1899) 169-244) and Trotter and Gleser for Afro-Americans (Am J Phys Anthropol 10 (1952) 463-514; Am J Phys Anthropol 47 (1977) 355-356) provided the most consistent estimates when applied to our sample. We then used the equation by Pearson for further analyses. Results indicate a reduction in stature in the transition from the Iron Age to the Roman period, and a subsequent increase in the transition from the Roman period to the Medieval period. Changes of limb lengths over time were more pronounced in the distal than in the proximal elements in both limbs. 2007 Wiley-Liss, Inc.

A numerical technique for linear elliptic partial differential equations in polygonal domains.

PubMed

Hashemzadeh, P; Fokas, A S; Smitheman, S A

2015-03-08

Integral representations for the solution of linear elliptic partial differential equations (PDEs) can be obtained using Green's theorem. However, these representations involve both the Dirichlet and the Neumann values on the boundary, and for a well-posed boundary-value problem (BVPs) one of these functions is unknown. A new transform method for solving BVPs for linear and integrable nonlinear PDEs usually referred to as the unified transform ( or the Fokas transform ) was introduced by the second author in the late Nineties. For linear elliptic PDEs, this method can be considered as the analogue of Green's function approach but now it is formulated in the complex Fourier plane instead of the physical plane. It employs two global relations also formulated in the Fourier plane which couple the Dirichlet and the Neumann boundary values. These relations can be used to characterize the unknown boundary values in terms of the given boundary data, yielding an elegant approach for determining the Dirichlet to Neumann map . The numerical implementation of the unified transform can be considered as the counterpart in the Fourier plane of the well-known boundary integral method which is formulated in the physical plane. For this implementation, one must choose (i) a suitable basis for expanding the unknown functions and (ii) an appropriate set of complex values, which we refer to as collocation points, at which to evaluate the global relations. Here, by employing a variety of examples we present simple guidelines of how the above choices can be made. Furthermore, we provide concrete rules for choosing the collocation points so that the condition number of the matrix of the associated linear system remains low.

Initial steps toward automation of a propellant processor

NASA Technical Reports Server (NTRS)

Schallhorn, Paul; Ramohalli, Kumar

1990-01-01

This paper presents the results from an experimental study aimed at ultimately automating the mixing of propellants in order to minimize unintended variations usually attributed to human error. The water heater and delivery system of a one-pint Baker-Perkins (APV) vertical mixer are automated with computer control. Various innovations are employed to introduce economy and low thermal inertia. Some of these include twin heaters/reservoirs instead of one large reservoir, a compact water mixer for achieving the desired temperature quickly, and thorough insulation of the entire water system. The completed system is tested during two propellant mixes. The temperature uniformly is proven through careful measurements employing several local thermocouples.

Preference in Random Assignment: Implications for the Interpretation of Randomized Trials

PubMed Central

Gold, Paul B.; Hargreaves, William A.; Aronson, Elliot; Bickman, Leonard; Barreira, Paul J.; Jones, Danson R.; Rodican, Charles F.; Fisher, William H.

2009-01-01

Random assignment to a preferred experimental condition can increase service engagement and enhance outcomes, while assignment to a less-preferred condition can discourage service receipt and limit outcome attainment. We examined randomized trials for one prominent psychiatric rehabilitation intervention, supported employment, to gauge how often assignment preference might have complicated the interpretation of findings. Condition descriptions, and greater early attrition from services-as-usual comparison conditions, suggest that many study enrollees favored assignment to new rapid-job-placement supported employment, but no study took this possibility into account. Reviews of trials in other service fields are needed to determine whether this design problem is widespread. PMID:19434489

Landau Damping of Beam Instabilities by Electron Lenses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shiltsev, V.; Alexahin, Yuri; Burov, A.

2017-06-26

Modern and future particle accelerators employ increasingly higher intensity and brighter beams of charged particles and become operationally limited by coherent beam instabilities. Usual methods to control the instabilities, such as octupole magnets, beam feedback dampers and use of chromatic effects, become less effective and insufficient. We show that, in contrast, Lorentz forces of a low-energy, a magnetically stabilized electron beam, or "electron lens", easily introduces transverse nonlinear focusing sufficient for Landau damping of transverse beam instabilities in accelerators. It is also important that, unlike other nonlinear elements, the electron lens provides the frequency spread mainly at the beam core,more » thus allowing much higher frequency spread without lifetime degradation. For the parameters of the Future Circular Collider, a single conventional electron lens a few meters long would provide stabilization superior to tens of thousands of superconducting octupole magnets.« less

Experiences in fragment-based drug discovery.

PubMed

Murray, Christopher W; Verdonk, Marcel L; Rees, David C

2012-05-01

Fragment-based drug discovery (FBDD) has become established in both industry and academia as an alternative approach to high-throughput screening for the generation of chemical leads for drug targets. In FBDD, specialised detection methods are used to identify small chemical compounds (fragments) that bind to the drug target, and structural biology is usually employed to establish their binding mode and to facilitate their optimisation. In this article, we present three recent and successful case histories in FBDD. We then re-examine the key concepts and challenges of FBDD with particular emphasis on recent literature and our own experience from a substantial number of FBDD applications. Our opinion is that careful application of FBDD is living up to its promise of delivering high quality leads with good physical properties and that in future many drug molecules will be derived from fragment-based approaches. Copyright © 2012 Elsevier Ltd. All rights reserved.

An extended transfer operator approach to identify separatrices in open flows

NASA Astrophysics Data System (ADS)

Lünsmann, Benedict; Kantz, Holger

2018-05-01

Vortices of coherent fluid volume are considered to have a substantial impact on transport processes in turbulent media. Yet, due to their Lagrangian nature, detecting these structures is highly nontrivial. In this respect, transfer operator approaches have been proven to provide useful tools: Approximating a possibly time-dependent flow as a discrete Markov process in space and time, information about coherent structures is contained in the operator's eigenvectors, which is usually extracted by employing clustering methods. Here, we propose an extended approach that couples surrounding filaments using "mixing boundary conditions" and focuses on the separation of the inner coherent set and embedding outer flow. The approach refrains from using unsupervised machine learning techniques such as clustering and uses physical arguments by maximizing a coherence ratio instead. We show that this technique improves the reconstruction of separatrices in stationary open flows and succeeds in finding almost-invariant sets in periodically perturbed flows.

Fluorescence decay data analysis correcting for detector pulse pile-up at very high count rates

NASA Astrophysics Data System (ADS)

Patting, Matthias; Reisch, Paja; Sackrow, Marcus; Dowler, Rhys; Koenig, Marcelle; Wahl, Michael

2018-03-01

Using time-correlated single photon counting for the purpose of fluorescence lifetime measurements is usually limited in speed due to pile-up. With modern instrumentation, this limitation can be lifted significantly, but some artifacts due to frequent merging of closely spaced detector pulses (detector pulse pile-up) remain an issue to be addressed. We propose a data analysis method correcting for this type of artifact and the resulting systematic errors. It physically models the photon losses due to detector pulse pile-up and incorporates the loss in the decay fit model employed to obtain fluorescence lifetimes and relative amplitudes of the decay components. Comparison of results with and without this correction shows a significant reduction of systematic errors at count rates approaching the excitation rate. This allows quantitatively accurate fluorescence lifetime imaging at very high frame rates.

Deposition of tantalum carbide coatings on graphite by laser interactions

NASA Technical Reports Server (NTRS)

Veligdan, James; Branch, D.; Vanier, P. E.; Barietta, R. E.

1994-01-01

Graphite surfaces can be hardened and protected from erosion by hydrogen at high temperatures by refractory metal carbide coatings, which are usually prepared by chemical vapor deposition (CVD) or chemical vapor reaction (CVR) methods. These techniques rely on heating the substrate to a temperature where a volatile metal halide decomposes and reacts with either a hydrocarbon gas or with carbon from the substrate. For CVR techniques, deposition temperatures must be in excess of 2000 C in order to achieve favorable deposition kinetics. In an effort to lower the bulk substrate deposition temperature, the use of laser interactions with both the substrate and the metal halide deposition gas has been employed. Initial testing involved the use of a CO2 laser to heat the surface of a graphite substrate and a KrF excimer laser to accomplish a photodecomposition of TaCl5 gas near the substrate. The results of preliminary experiments using these techniques are described.

Landau Damping of Beam Instabilities by Electron Lenses

DOE PAGES

Shiltsev, V.; Alexahin, Yuri; Burov, A.; ...

2017-09-27

Modern and future particle accelerators employ increasingly higher intensity and brighter beams of charged particles and become operationally limited by coherent beam instabilities. Usual methods to control the instabilities, such as octupole magnets, beam feedback dampers, and use of chromatic effects, become less effective and insufficient. Here, we show that, in contrast, Lorentz forces of a low-energy, magnetically stabilized electron beam, or “electron lens,” easily introduce transverse nonlinear focusing sufficient for Landau damping of transverse beam instabilities in accelerators. It is also important to note that, unlike other nonlinear elements, the electron lens provides the frequency spread mainly at themore » beam core, thus allowing much higher frequency spread without lifetime degradation. For the parameters of the Future Circular Collider, a single conventional electron lens a few meters long would provide stabilization superior to tens of thousands of superconducting octupole magnets.« less

Beneficiation of the gold bearing ore by gravity and flotation

NASA Astrophysics Data System (ADS)

Gül, Alim; Kangal, Olgaç; Sirkeci, Ayhan A.; Önal, Güven

2012-02-01

Gold concentration usually consists of gravity separation, flotation, cyanidation, or the combination of these processes. The choice among these processes depends on the mineralogical characterization and gold content of the ore. Recently, the recovery of gold using gravity methods has gained attention because of low cost and environmentally friendly operations. In this study, gold pre-concentrates were produced by the stepwise gravity separation and flotation techniques. The Knelson concentrator and conventional flotation were employed for the recovery of gold. Gold bearing ore samples were taken from Gümüşhane Region, northern east part of Turkey. As a result of stepwise Knelson concentration experiments, a gold concentrate assaying around 620 g/t is produced with 41.4wt% recovery. On the other hand, a gold concentrate about 82 g/t is obtained with 89.9wt% recovery from a gold ore assaying 6 g/t Au by direct flotation.

High-order rogue waves of the Benjamin-Ono equation and the nonlocal nonlinear Schrödinger equation

NASA Astrophysics Data System (ADS)

Liu, Wei

2017-10-01

High-order rogue wave solutions of the Benjamin-Ono equation and the nonlocal nonlinear Schrödinger equation are derived by employing the bilinear method, which are expressed by simple polynomials. Typical dynamics of these high-order rogue waves are studied by analytical and graphical ways. For the Benjamin-Ono equation, there are two types of rogue waves, namely, bright rogue waves and dark rogue waves. In particular, the fundamental rogue wave pattern is different from the usual fundamental rogue wave patterns in other soliton equations. For the nonlocal nonlinear Schrödinger equation, the exact explicit rogue wave solutions up to the second order are presented. Typical rogue wave patterns such as Peregrine-type, triple and fundamental rogue waves are put forward. These high-order rogue wave patterns have not been shown before in the nonlocal Schrödinger equation.

Utilisation of oral health services, oral health needs and oral health status in a peri-urban informal settlement.

PubMed

Westaway, M S; Viljoen, E; Rudolph, M J

1999-04-01

Interviews were conducted with 294 black residents (155 females and 138 males) of a peri-urban informal settlement in Gauteng to ascertain utilisation of oral health services, oral health needs and oral health status. Only 37 per cent of the sample had consulted a dentist or medical practitioner, usually for extractions. Teenagers and employed persons were significantly less likely to utilise dentists than the older age groups and unemployed persons. Forty per cent were currently experiencing oral health problems such as a sore mouth, tooth decay and bleeding/painful gums. Two hundred and twelve (73 per cent) interviewees wanted dental treatment or advice. Residents who rated their oral health status as fair or poor appeared to have the greatest need for oral health services. The use of interviews appears to be a cost-effective method of determining oral morbidity.

Ballistic performance of a Kevlar-29 woven fibre composite under varied temperatures

NASA Astrophysics Data System (ADS)

Soykasap, O.; Colakoglu, M.

2010-05-01

Armours are usually manufactured from polymer matrix composites and used for both military and non-military purposes in different seasons, climates, and regions. The mechanical properties of the composites depend on temperature, which also affects their ballistic characteristics. The armour is used to absorb the kinetic energy of a projectile without any major injury to a person. Therefore, besides a high strength and lightness, a high damping capacity is required to absorb the impact energy transferred by the projectile. The ballistic properties of a Kevlar 29/polyvinyl butyral composite are investigated under varied temperatures in this study. The elastic modulus of the composite is determined from the natural frequency of composite specimens at different temperatures by using a damping monitoring method. Then, the backside deformation of composite plates is analysed experimentally and numerically employing the finite-element program Abaqus. The experimental and numeric results obtained are in good agreement.

Motivating students' participation in a computer networks course by means of magic, drama and games.

PubMed

Hilas, Constantinos S; Politis, Anastasios

2014-01-01

The recent economic crisis has forced many universities to cut down expenses by packing students into large lecture groups. The problem with large auditoria is that they discourage dialogue between students and faculty and they burden participation. Adding to this, students in computer science courses usually find the field to be full of theoretical and technical concepts. Lack of understanding leads them to lose interest and / or motivation. Classroom experience shows that the lecturer could employ alternative teaching methods, especially for early-year undergraduate students, in order to grasp their interest and introduce basic concepts. This paper describes some of the approaches that may be used to keep students interested and make them feel comfortable as they comprehend basic concepts in computer networks. The lecturing procedure was enriched with games, magic tricks and dramatic representations. This approach was used experimentally for two semesters and the results were more than encouraging.

Towards a bootstrap approach to higher orders of epsilon expansion

NASA Astrophysics Data System (ADS)

Dey, Parijat; Kaviraj, Apratim

2018-02-01

We employ a hybrid approach in determining the anomalous dimension and OPE coefficient of higher spin operators in the Wilson-Fisher theory. First we do a large spin analysis for CFT data where we use results obtained from the usual and the Mellin bootstrap and also from Feynman diagram literature. This gives new predictions at O( ɛ 4) and O( ɛ 5) for anomalous dimensions and OPE coefficients, and also provides a cross-check for the results from Mellin bootstrap. These higher orders get contributions from all higher spin operators in the crossed channel. We also use the bootstrap in Mellin space method for ϕ 3 in d = 6 - ɛ CFT where we calculate general higher spin OPE data. We demonstrate a higher loop order calculation in this approach by summing over contributions from higher spin operators of the crossed channel in the same spirit as before.

A Rotifer-Based Technique to Rear Zebrafish Larvae in Small Academic Settings.

PubMed

Allen, Raymond L; Wallace, Robert L; Sisson, Barbara E

2016-08-01

Raising zebrafish from larvae to juveniles can be laborious, requiring frequent water exchanges and continuous culturing of live feed. This task becomes even more difficult for small institutions that do not have access to the necessary funding, equipment, or personnel to maintain large-scale systems usually employed in zebrafish husbandry. To open this opportunity to smaller institutions, a cost-efficient protocol was developed to culture Nannochloropsis to feed the halophilic, planktonic rotifer Brachionus plicatilis; the rotifers were then used to raise larval zebrafish to juveniles. By using these methods, small institutions can easily raise zebrafish embryos in a cost-efficient manner without the need to establish an extensive fish-raising facility. In addition, culturing rotifers provides a micrometazoan that serves as a model organism for teaching and undergraduate research studies for a variety of topics, including aging, toxicology, and predator-prey dynamics.

Self-organization in a bimotility mixture of model microswimmers

NASA Astrophysics Data System (ADS)

Agrawal, Adyant; Babu, Sujin B.

2018-02-01

We study the cooperation and segregation dynamics in a bimotility mixture of microorganisms which swim at low Reynolds numbers via periodic deformations along the body. We employ a multiparticle collision dynamics method to simulate a two component mixture of artificial swimmers, termed as Taylor lines, which differ from each other only in the propulsion speed. The analysis reveals that a contribution of slower swimmers towards clustering, on average, is much larger as compared to the faster ones. We notice distinctive self-organizing dynamics, depending on the percentage difference in the speed of the two kinds. If this difference is large, the faster ones fragment the clusters of the slower ones in order to reach the boundary and form segregated clusters. Contrarily, when it is small, both kinds mix together at first, the faster ones usually leading the cluster and then gradually the slower ones slide out thereby also leading to segregation.

Structural properties and defects of GaN crystals grown at ultra-high pressures: A molecular dynamics simulation

NASA Astrophysics Data System (ADS)

Gao, Tinghong; Li, Yidan; Xie, Quan; Tian, Zean; Chen, Qian; Liang, Yongchao; Ren, Lei; Hu, Xuechen

2018-01-01

The growth of GaN crystals at different pressures was studied by molecular dynamics simulation employing the Stillinger-Weber potential, and their structural properties and defects were characterized using the radial distribution function, the Voronoi polyhedron index method, and a suitable visualization technology. Crystal structures formed at 0, 1, 5, 10, and 20 GPa featured an overwhelming number of <4 0 0 0> Voronoi polyhedra, whereas amorphous structures comprising numerous disordered polyhedra were produced at 50 GPa. During quenching, coherent twin boundaries were easily formed between zinc-blende and wurtzite crystal structures in GaN. Notably, point defects usually appeared at low pressure, whereas dislocations were observed at high pressure, since the simultaneous growth of two crystal grains with different crystal orientations and their boundary expansion was hindered in the latter case, resulting in the formation of a dislocation between these grains.

Variances and uncertainties of the sample laboratory-to-laboratory variance (S(L)2) and standard deviation (S(L)) associated with an interlaboratory study.

PubMed

McClure, Foster D; Lee, Jung K

2012-01-01

The validation process for an analytical method usually employs an interlaboratory study conducted as a balanced completely randomized model involving a specified number of randomly chosen laboratories, each analyzing a specified number of randomly allocated replicates. For such studies, formulas to obtain approximate unbiased estimates of the variance and uncertainty of the sample laboratory-to-laboratory (lab-to-lab) STD (S(L)) have been developed primarily to account for the uncertainty of S(L) when there is a need to develop an uncertainty budget that includes the uncertainty of S(L). For the sake of completeness on this topic, formulas to estimate the variance and uncertainty of the sample lab-to-lab variance (S(L)2) were also developed. In some cases, it was necessary to derive the formulas based on an approximate distribution for S(L)2.

Segmenting human from photo images based on a coarse-to-fine scheme.

PubMed

Lu, Huchuan; Fang, Guoliang; Shao, Xinqing; Li, Xuelong

2012-06-01

Human segmentation in photo images is a challenging and important problem that finds numerous applications ranging from album making and photo classification to image retrieval. Previous works on human segmentation usually demand a time-consuming training phase for complex shape-matching processes. In this paper, we propose a straightforward framework to automatically recover human bodies from color photos. Employing a coarse-to-fine strategy, we first detect a coarse torso (CT) using the multicue CT detection algorithm and then extract the accurate region of the upper body. Then, an iterative multiple oblique histogram algorithm is presented to accurately recover the lower body based on human kinematics. The performance of our algorithm is evaluated on our own data set (contains 197 images with human body region ground truth data), VOC 2006, and the 2010 data set. Experimental results demonstrate the merits of the proposed method in segmenting a person with various poses.

Expressions for the precession quantities based upon the IAU /1976/ system of astronomical constants

NASA Technical Reports Server (NTRS)

Lieske, J. H.; Lederle, T.; Fricke, W.; Morando, B.

1977-01-01

The structure of the expressions usually employed in calculating the effects of precession is examined, and a method is outlined for revising the expressions to account for changes in the fundamental astronomical constants. It is shown that the basic set of parameters, upon which depend the lengthy polynomials for computing the mean obliquity of data and the elements of the precession matrix, consists of the mean obliquity, the speed of general precession in longitude at a fixed epoch, and the system of planetary masses. Special attention is given to the motion of the ecliptic pole, formulations for a basic epoch as well as an arbitrary epoch, and ecliptic motion relative to the basic epoch. Numerical precession quantities at epoch J2000.0 (JED 2451545.0) are presented which result from the revision of astronomical constants adopted at the XVI General Assembly of the IAU.

Application of genetically engineered microbial whole-cell biosensors for combined chemosensing.

PubMed

He, Wei; Yuan, Sheng; Zhong, Wen-Hui; Siddikee, Md Ashaduzzaman; Dai, Chuan-Chao

2016-02-01

The progress of genetically engineered microbial whole-cell biosensors for chemosensing and monitoring has been developed in the last 20 years. Those biosensors respond to target chemicals and produce output signals, which offer a simple and alternative way of assessment approaches. As actual pollution caused by human activities usually contains a combination of different chemical substances, how to employ those biosensors to accurately detect real contaminant samples and evaluate biological effects of the combined chemicals has become a realistic object of environmental researches. In this review, we outlined different types of the recent method of genetically engineered microbial whole-cell biosensors for combined chemical evaluation, epitomized their detection performance, threshold, specificity, and application progress that have been achieved up to now. We also discussed the applicability and limitations of this biosensor technology and analyzed the optimum conditions for their environmental assessment in a combined way.

High-Speed Current dq PI Controller for Vector Controlled PMSM Drive

PubMed Central

Reaz, Mamun Bin Ibne; Rahman, Labonnah Farzana; Chang, Tae Gyu

2014-01-01

High-speed current controller for vector controlled permanent magnet synchronous motor (PMSM) is presented. The controller is developed based on modular design for faster calculation and uses fixed-point proportional-integral (PI) method for improved accuracy. Current dq controller is usually implemented in digital signal processor (DSP) based computer. However, DSP based solutions are reaching their physical limits, which are few microseconds. Besides, digital solutions suffer from high implementation cost. In this research, the overall controller is realizing in field programmable gate array (FPGA). FPGA implementation of the overall controlling algorithm will certainly trim down the execution time significantly to guarantee the steadiness of the motor. Agilent 16821A Logic Analyzer is employed to validate the result of the implemented design in FPGA. Experimental results indicate that the proposed current dq PI controller needs only 50 ns of execution time in 40 MHz clock, which is the lowest computational cycle for the era. PMID:24574913

A tutorial on the CARE III approach to reliability modeling. [of fault tolerant avionics and control systems

NASA Technical Reports Server (NTRS)

Trivedi, K. S.; Geist, R. M.

1981-01-01

The CARE 3 reliability model for aircraft avionics and control systems is described by utilizing a number of examples which frequently use state-of-the-art mathematical modeling techniques as a basis for their exposition. Behavioral decomposition followed by aggregration were used in an attempt to deal with reliability models with a large number of states. A comprehensive set of models of the fault-handling processes in a typical fault-tolerant system was used. These models were semi-Markov in nature, thus removing the usual restrictions of exponential holding times within the coverage model. The aggregate model is a non-homogeneous Markov chain, thus allowing the times to failure to posses Weibull-like distributions. Because of the departures from traditional models, the solution method employed is that of Kolmogorov integral equations, which are evaluated numerically.

Enhancing mathematics teachers' quality through Lesson Study.

PubMed

Lomibao, Laila S

2016-01-01

The efficiency and effectivity of the learning experience is dependent on the teacher quality, thus, enhancing teacher's quality is vital in improving the students learning outcome. Since, the usual top-down one-shot cascading model practice for teachers' professional development in Philippines has been observed to have much information dilution, and the Southeast Asian Ministers of Education Organization demanded the need to develop mathematics teachers' quality standards through the Southeast Asia Regional Standards for Mathematics Teachers (SEARS-MT), thus, an intensive, ongoing professional development model should be provided to teachers. This study was undertaken to determine the impact of Lesson Study on Bulua National High School mathematics teachers' quality level in terms of SEARS-MT dimensions. A mixed method of quantitative-qualitative research design was employed. Results of the analysis revealed that Lesson Study effectively enhanced mathematics teachers' quality and promoted teachers professional development. Teachers positively perceived Lesson Study to be beneficial for them to become a better mathematics teacher.

Preliminary report on electromagnetic model studies

USGS Publications Warehouse

Frischknecht, F.C.; Mangan, G.B.

1960-01-01

More than 70 resopnse curves for various models have been obtained using the slingram and turam electromagnetic methods. Results show that for the slingram method, horizontal co-planar coils are usually more sensitive than vertical, co-axial or vertical, co-planar coils. The shape of the anomaly usually is simpler for the vertical coils.

A framework for the design and development of physical employment tests and standards.

PubMed

Payne, W; Harvey, J

2010-07-01

Because operational tasks in the uniformed services (military, police, fire and emergency services) are physically demanding and incur the risk of injury, employment policy in these services is usually competency based and predicated on objective physical employment standards (PESs) based on physical employment tests (PETs). In this paper, a comprehensive framework for the design of PETs and PESs is presented. Three broad approaches to physical employment testing are described and compared: generic predictive testing; task-related predictive testing; task simulation testing. Techniques for the selection of a set of tests with good coverage of job requirements, including job task analysis, physical demands analysis and correlation analysis, are discussed. Regarding individual PETs, theoretical considerations including measurability, discriminating power, reliability and validity, and practical considerations, including development of protocols, resource requirements, administrative issues and safety, are considered. With regard to the setting of PESs, criterion referencing and norm referencing are discussed. STATEMENT OF RELEVANCE: This paper presents an integrated and coherent framework for the development of PESs and hence provides a much needed theoretically based but practically oriented guide for organisations seeking to establish valid and defensible PESs.

AGATE: Adversarial Game Analysis for Tactical Evaluation

NASA Technical Reports Server (NTRS)

Huntsberger, Terrance L.

2013-01-01

AGATE generates a set of ranked strategies that enables an autonomous vehicle to track/trail another vehicle that is trying to break the contact using evasive tactics. The software is efficient (can be run on a laptop), scales well with environmental complexity, and is suitable for use onboard an autonomous vehicle. The software will run in near-real-time (2 Hz) on most commercial laptops. Existing software is usually run offline in a planning mode, and is not used to control an unmanned vehicle actively. JPL has developed a system for AGATE that uses adversarial game theory (AGT) methods (in particular, leader-follower and pursuit-evasion) to enable an autonomous vehicle (AV) to maintain tracking/ trailing operations on a target that is employing evasive tactics. The AV trailing, tracking, and reacquisition operations are characterized by imperfect information, and are an example of a non-zero sum game (a positive payoff for the AV is not necessarily an equal loss for the target being tracked and, potentially, additional adversarial boats). Previously, JPL successfully applied the Nash equilibrium method for onboard control of an autonomous ground vehicle (AGV) travelling over hazardous terrain.

Giant Gold Nanowire Vesicle-Based Colorimetric and SERS Dual-Mode Immunosensor for Ultrasensitive Detection of Vibrio parahemolyticus.

PubMed

Guo, Zhiyong; Jia, Yaru; Song, Xinxin; Lu, Jing; Lu, Xuefei; Liu, Baoqing; Han, Jiaojiao; Huang, Youju; Zhang, Jiawei; Chen, Tao

2018-05-15

Conventional methods for the detection of Vibrio parahemolyticus (VP) usually need tedious, labor-intensive processes, and have low sensitivity, which further limits their practical applications. Herein, we developed a simple and efficient colorimetry and surface-enhanced Raman scattering (SERS) dual-mode immunosensor for sensitive detection of VP, by employing giant Au vesicles with anchored tiny gold nanowires (AuNW) as a smart probe. Due to the larger specific surface and special hollow structure of giant Au vesicles, silver staining would easily lead to vivid color change for colorimetric analysis and further amplify SERS signals. The t-test was further used to determine if two sets of data from colorimetry and SERS were significantly different from each other. The result shows that there was no significant difference between data from the two methods. Two sets of data can mutually validate each other and avoid false positive and negative detection. The designed colorimetry-SERS dual-mode sensor would be very promising in various applications such as food safety inspection, personal healthcare, and on-site environmental monitoring.

Relativistic initial conditions for N-body simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fidler, Christian; Tram, Thomas; Crittenden, Robert

2017-06-01

Initial conditions for (Newtonian) cosmological N-body simulations are usually set by re-scaling the present-day power spectrum obtained from linear (relativistic) Boltzmann codes to the desired initial redshift of the simulation. This back-scaling method can account for the effect of inhomogeneous residual thermal radiation at early times, which is absent in the Newtonian simulations. We analyse this procedure from a fully relativistic perspective, employing the recently-proposed Newtonian motion gauge framework. We find that N-body simulations for ΛCDM cosmology starting from back-scaled initial conditions can be self-consistently embedded in a relativistic space-time with first-order metric potentials calculated using a linear Boltzmann code.more » This space-time coincides with a simple ''N-body gauge'' for z < 50 for all observable modes. Care must be taken, however, when simulating non-standard cosmologies. As an example, we analyse the back-scaling method in a cosmology with decaying dark matter, and show that metric perturbations become large at early times in the back-scaling approach, indicating a breakdown of the perturbative description. We suggest a suitable ''forwards approach' for such cases.« less

Imaging model for the scintillator and its application to digital radiography image enhancement.

PubMed

Wang, Qian; Zhu, Yining; Li, Hongwei

2015-12-28

Digital Radiography (DR) images obtained by OCD-based (optical coupling detector) Micro-CT system usually suffer from low contrast. In this paper, a mathematical model is proposed to describe the image formation process in scintillator. By solving the correlative inverse problem, the quality of DR images is improved, i.e. higher contrast and spatial resolution. By analyzing the radiative transfer process of visible light in scintillator, scattering is recognized as the main factor leading to low contrast. Moreover, involved blurring effect is also concerned and described as point spread function (PSF). Based on these physical processes, the scintillator imaging model is then established. When solving the inverse problem, pre-correction to the intensity of x-rays, dark channel prior based haze removing technique, and an effective blind deblurring approach are employed. Experiments on a variety of DR images show that the proposed approach could improve the contrast of DR images dramatically as well as eliminate the blurring vision effectively. Compared with traditional contrast enhancement methods, such as CLAHE, our method could preserve the relative absorption values well.

A Differential Evolution Based Approach to Estimate the Shape and Size of Complex Shaped Anomalies Using EIT Measurements

NASA Astrophysics Data System (ADS)

Rashid, Ahmar; Khambampati, Anil Kumar; Kim, Bong Seok; Liu, Dong; Kim, Sin; Kim, Kyung Youn

EIT image reconstruction is an ill-posed problem, the spatial resolution of the estimated conductivity distribution is usually poor and the external voltage measurements are subject to variable noise. Therefore, EIT conductivity estimation cannot be used in the raw form to correctly estimate the shape and size of complex shaped regional anomalies. An efficient algorithm employing a shape based estimation scheme is needed. The performance of traditional inverse algorithms, such as the Newton Raphson method, used for this purpose is below par and depends upon the initial guess and the gradient of the cost functional. This paper presents the application of differential evolution (DE) algorithm to estimate complex shaped region boundaries, expressed as coefficients of truncated Fourier series, using EIT. DE is a simple yet powerful population-based, heuristic algorithm with the desired features to solve global optimization problems under realistic conditions. The performance of the algorithm has been tested through numerical simulations, comparing its results with that of the traditional modified Newton Raphson (mNR) method.

Preparation of Magnesium, Cobalt and Nickel Ferrite Nanoparticles from Metal Oxides using Deep Eutectic Solvents.

PubMed

Söldner, Anika; Zach, Julia; Iwanow, Melanie; Gärtner, Tobias; Schlosser, Marc; Pfitzner, Arno; König, Burkhard

2016-09-05

Natural deep eutectic solvents (DESs) dissolve simple metal oxides and are used as a reaction medium to synthesize spinel-type ferrite nanoparticles MFe2 O4 (M=Mg, Zn, Co, Ni). The best results for phase-pure spinel ferrites are obtained with the DES consisting of choline chloride (ChCl) and maleic acid. By employing DESs, the reactions proceed at much lower temperatures than usual for the respective solid-phase reactions of the metal oxides and at the same temperatures as synthesis with comparable calcination processes using metal salts. The method therefore reduces the overall required energy for the nanoparticle synthesis. Thermogravimetric analysis shows that the thermolysis process of the eutectic melts in air occurs in one major step. The phase-pure spinel-type ferrite particles are thoroughly characterized by X-ray diffraction, diffuse-reflectance UV/Vis spectroscopy, and scanning electron microscopy. The properties of the obtained nanoparticles are shown to be comparable to those obtained by other methods, illustrating the potential of natural DESs for processing metal oxides. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Preparation of balanced trichromatic white phosphors for solid-state white lighting.

PubMed

Al-Waisawy, Sara; George, Anthony F; Jadwisienczak, Wojciech M; Rahman, Faiz

2017-08-01

High quality white light-emitting diodes (LEDs) employ multi-component phosphor mixtures to generate light of a high color rendering index (CRI). The number of distinct components in a typical phosphor mix usually ranges from two to four. Here we describe a systematic experimental technique for starting with phosphors of known chromatic properties and arriving at their respective proportions for creating a blended phosphor to produce light of the desired chromaticity. This method is applicable to both LED pumped and laser diode (LD) pumped white light sources. In this approach, the radiometric power in the down-converted luminescence of each phosphor is determined and that information is used to estimate the CIE chromaticity coordinate of light generated from the mixed phosphor. A suitable method for mixing multi-component phosphors is also described. This paper also examines the effect of light scattering particles in phosphors and their use for altering the spectral characteristics of LD- and LED-generated light. This is the only approach available for making high efficiency phosphor-converted single-color LEDs that emit light of wide spectral width. Copyright © 2016 John Wiley & Sons, Ltd.

Gastric Cancer Cells in Peritoneal Lavage Fluid: A Systematic Review Comparing Cytological with Molecular Detection for Diagnosis of Peritoneal Metastases and Prediction of Peritoneal Recurrences.

PubMed

Virgilio, Edoardo; Giarnieri, Enrico; Giovagnoli, Maria Rosaria; Montagnini, Monica; Proietti, Antonella; D'Urso, Rosaria; Mercantini, Paolo; Valabrega, Stefano; Balducci, Genoveffa; Cavallini, Marco

2018-03-01

Detecting free tumor cells in the peritoneal lavage fluid of gastric cancer patients permits to assess a more accurate prognosis, predict peritoneal recurrence and select cases for a more aggressive treatment. Currently, cytology and molecular biology comprise the two most popular methods of detection that are under constant study by researchers. We burrowed into the available literature comparing cytological with molecular detection of free intraperitoneal gastric cancer cells. PubMed, Science Direct, Scopus and Google Scholar were the search engines investigated. As of 2017, 51 dedicated studies have been published. Messenger RNA of carcinoembryonic antigen was the genetic target most frequently described. The genetic technique is usually superior to cytology in sensitivity (38-100% vs. 12.3-67% respectively), whereas cytological examination tends to show a slight pre-eminence in specificity (approximately 100%). So far, given the imperfection of each method, employment of both cytology and molecular examination seem to be mandatory. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

EIT Imaging Regularization Based on Spectral Graph Wavelets.

PubMed

Gong, Bo; Schullcke, Benjamin; Krueger-Ziolek, Sabine; Vauhkonen, Marko; Wolf, Gerhard; Mueller-Lisse, Ullrich; Moeller, Knut

2017-09-01

The objective of electrical impedance tomographic reconstruction is to identify the distribution of tissue conductivity from electrical boundary conditions. This is an ill-posed inverse problem usually solved under the finite-element method framework. In previous studies, standard sparse regularization was used for difference electrical impedance tomography to achieve a sparse solution. However, regarding elementwise sparsity, standard sparse regularization interferes with the smoothness of conductivity distribution between neighboring elements and is sensitive to noise. As an effect, the reconstructed images are spiky and depict a lack of smoothness. Such unexpected artifacts are not realistic and may lead to misinterpretation in clinical applications. To eliminate such artifacts, we present a novel sparse regularization method that uses spectral graph wavelet transforms. Single-scale or multiscale graph wavelet transforms are employed to introduce local smoothness on different scales into the reconstructed images. The proposed approach relies on viewing finite-element meshes as undirected graphs and applying wavelet transforms derived from spectral graph theory. Reconstruction results from simulations, a phantom experiment, and patient data suggest that our algorithm is more robust to noise and produces more reliable images.

Input Shaping enhanced Active Disturbance Rejection Control for a twin rotor multi-input multi-output system (TRMS).

PubMed

Yang, Xiaoyan; Cui, Jianwei; Lao, Dazhong; Li, Donghai; Chen, Junhui

2016-05-01

In this paper, a composite control based on Active Disturbance Rejection Control (ADRC) and Input Shaping is presented for TRMS with two degrees of freedom (DOF). The control tasks consist of accurately tracking desired trajectories and obtaining disturbance rejection in both horizontal and vertical planes. Due to un-measurable states as well as uncertainties stemming from modeling uncertainty and unknown disturbance torques, ADRC is employed, and feed-forward Input Shaping is used to improve the dynamical response. In the proposed approach, because the coupling effects are maintained in controller derivation, there is no requirement to decouple the TRMS into horizontal and vertical subsystems, which is usually performed in the literature. Finally, the proposed method is implemented on the TRMS platform, and the results are compared with those of PID and ADRC in a similar structure. The experimental results demonstrate the effectiveness of the proposed method. The operation of the controller allows for an excellent set-point tracking behavior and disturbance rejection with system nonlinearity and complex coupling conditions. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Determination of adrenaline, noradrenaline and corticosterone in rodent blood by ion pair reversed phase UHPLC-MS/MS.

PubMed

Bergh, Marianne Skov-Skov; Bogen, Inger Lise; Andersen, Jannike Mørch; Øiestad, Åse Marit Leere; Berg, Thomas

2018-01-01

A novel ion pair reversed phase ultra high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method for simultaneous determination of the stress hormones adrenaline, noradrenaline and corticosterone in rodent blood was developed and fully validated. Separations were performed on an Acquity HSS T3 column (2.1mm i.d.×100mm, 1.8μm) with gradient elution and a runtime of 5.5min. The retention of adrenaline and noradrenaline was substantially increased by employing the ion pair reagent heptafluorobutyric acid (HFBA). Ion pair reagents are usually added to the mobile phase only, but we demonstrate for the first time that including HFBA to the sample reconstitution solvent as well, has a major impact on the chromatography of these compounds. The stability of adrenaline and corticosterone in rodent blood was investigated using the surrogate analytes adrenaline-d 3 and corticosterone-d 8 . The applicability of the described method was demonstrated by measuring the concentration of stress hormones in rodent blood samples. Copyright © 2017 Elsevier B.V. All rights reserved.

Extension of the Helmholtz-Smoluchowski velocity to the hydrophobic microchannels with velocity slip.

PubMed

Park, H M; Kim, T W

2009-01-21

Electrokinetic flows through hydrophobic microchannels experience velocity slip at the microchannel wall, which affects volumetric flow rate and solute retention time. The usual method of predicting the volumetric flow rate and velocity profile for hydrophobic microchannels is to solve the Navier-Stokes equation and the Poisson-Boltzmann equation for the electric potential with the boundary condition of velocity slip expressed by the Navier slip coefficient, which is computationally demanding and defies analytic solutions. In the present investigation, we have devised a simple method of predicting the velocity profiles and volumetric flow rates of electrokinetic flows by extending the concept of the Helmholtz-Smoluchowski velocity to microchannels with Navier slip. The extended Helmholtz-Smoluchowski velocity is simple to use and yields accurate results as compared to the exact solutions. Employing the extended Helmholtz-Smoluchowski velocity, the analytical expressions for volumetric flow rate and velocity profile for electrokinetic flows through rectangular microchannels with Navier slip have been obtained at high values of zeta potential. The range of validity of the extended Helmholtz-Smoluchowski velocity is also investigated.

Numerical Methods for the Analysis of Power Transformer Tank Deformation and Rupture Due to Internal Arcing Faults

PubMed Central

Yan, Chenguang; Hao, Zhiguo; Zhang, Song; Zhang, Baohui; Zheng, Tao

2015-01-01

Power transformer rupture and fire resulting from an arcing fault inside the tank usually leads to significant security risks and serious economic loss. In order to reveal the essence of tank deformation or explosion, this paper presents a 3-D numerical computational tool to simulate the structural dynamic behavior due to overpressure inside transformer tank. To illustrate the effectiveness of the proposed method, a 17.3MJ and a 6.3MJ arcing fault were simulated on a real full-scale 360MVA/220kV oil-immersed transformer model, respectively. By employing the finite element method, the transformer internal overpressure distribution, wave propagation and von-Mises stress were solved. The numerical results indicate that the increase of pressure and mechanical stress distribution are non-uniform and the stress tends to concentrate on connecting parts of the tank as the fault time evolves. Given this feature, it becomes possible to reduce the risk of transformer tank rupture through limiting the fault energy and enhancing the mechanical strength of the local stress concentrative areas. The theoretical model and numerical simulation method proposed in this paper can be used as a substitute for risky and costly field tests in fault overpressure analysis and tank mitigation design of transformers. PMID:26230392

Numerical Methods for the Analysis of Power Transformer Tank Deformation and Rupture Due to Internal Arcing Faults.

PubMed

Yan, Chenguang; Hao, Zhiguo; Zhang, Song; Zhang, Baohui; Zheng, Tao

2015-01-01

Power transformer rupture and fire resulting from an arcing fault inside the tank usually leads to significant security risks and serious economic loss. In order to reveal the essence of tank deformation or explosion, this paper presents a 3-D numerical computational tool to simulate the structural dynamic behavior due to overpressure inside transformer tank. To illustrate the effectiveness of the proposed method, a 17.3 MJ and a 6.3 MJ arcing fault were simulated on a real full-scale 360MVA/220kV oil-immersed transformer model, respectively. By employing the finite element method, the transformer internal overpressure distribution, wave propagation and von-Mises stress were solved. The numerical results indicate that the increase of pressure and mechanical stress distribution are non-uniform and the stress tends to concentrate on connecting parts of the tank as the fault time evolves. Given this feature, it becomes possible to reduce the risk of transformer tank rupture through limiting the fault energy and enhancing the mechanical strength of the local stress concentrative areas. The theoretical model and numerical simulation method proposed in this paper can be used as a substitute for risky and costly field tests in fault overpressure analysis and tank mitigation design of transformers.

Research on simulated infrared image utility evaluation using deep representation

NASA Astrophysics Data System (ADS)

Zhang, Ruiheng; Mu, Chengpo; Yang, Yu; Xu, Lixin

2018-01-01

Infrared (IR) image simulation is an important data source for various target recognition systems. However, whether simulated IR images could be used as training data for classifiers depends on the features of fidelity and authenticity of simulated IR images. For evaluation of IR image features, a deep-representation-based algorithm is proposed. Being different from conventional methods, which usually adopt a priori knowledge or manually designed feature, the proposed method can extract essential features and quantitatively evaluate the utility of simulated IR images. First, for data preparation, we employ our IR image simulation system to generate large amounts of IR images. Then, we present the evaluation model of simulated IR image, for which an end-to-end IR feature extraction and target detection model based on deep convolutional neural network is designed. At last, the experiments illustrate that our proposed method outperforms other verification algorithms in evaluating simulated IR images. Cross-validation, variable proportion mixed data validation, and simulation process contrast experiments are carried out to evaluate the utility and objectivity of the images generated by our simulation system. The optimum mixing ratio between simulated and real data is 0.2≤γ≤0.3, which is an effective data augmentation method for real IR images.

Change detection from synthetic aperture radar images based on neighborhood-based ratio and extreme learning machine

NASA Astrophysics Data System (ADS)

Gao, Feng; Dong, Junyu; Li, Bo; Xu, Qizhi; Xie, Cui

2016-10-01

Change detection is of high practical value to hazard assessment, crop growth monitoring, and urban sprawl detection. A synthetic aperture radar (SAR) image is the ideal information source for performing change detection since it is independent of atmospheric and sunlight conditions. Existing SAR image change detection methods usually generate a difference image (DI) first and use clustering methods to classify the pixels of DI into changed class and unchanged class. Some useful information may get lost in the DI generation process. This paper proposed an SAR image change detection method based on neighborhood-based ratio (NR) and extreme learning machine (ELM). NR operator is utilized for obtaining some interested pixels that have high probability of being changed or unchanged. Then, image patches centered at these pixels are generated, and ELM is employed to train a model by using these patches. Finally, pixels in both original SAR images are classified by the pretrained ELM model. The preclassification result and the ELM classification result are combined to form the final change map. The experimental results obtained on three real SAR image datasets and one simulated dataset show that the proposed method is robust to speckle noise and is effective to detect change information among multitemporal SAR images.

Preparation, characterization, and surface conductivity of nanocomposites with hollow graphitic carbon nanospheres as fillers in polymethylmethacrylate matrix

NASA Astrophysics Data System (ADS)

Zhang, Cheng; Gao, Qingshan; Zhou, Bing; Bhargava, Gaurang

2017-08-01

Hollow graphitized carbon nanosphere (CNS) materials with inner diameter of 20 to 50 nm and shell thickness of 10 15 nm were synthesized from the polymerization of resorcinol (R) and formaldehyde (F) in the presence of a well-characterized iron polymeric complex (IPC). The CNS with unique nanostructures was used to fabricate CNS-polymer composites by dispersing CNS as fillers in the polymer matrix. Aggregation of CNS in polymer composites is usually a challenging issue. In this work, we employed in situ polymerization method and melt-mixing method to fabricate CNS-polymethylmethacrylate (PMMA) composites and compared their difference in terms of CNS dispersion in the composites and surface electrical conductivity. Four probes technique was utilized to measure the surface electrical conductivity of the CNS-PMMA composites. The measurements on four points and four silver painted lines on the thin film of CNS-PMMA composites were compared. The in situ polymerization method was found more efficient for better CNS dispersion in PMMA matrix and lower percolation conductivity threshold compared to the melt-mixing method. The enhanced electrical conductivity for CNS-PMMA composites may be attributed to the stronger covalent CNS-PMMA bonding between the surface functional groups and the MMA moieties.

Analysis of characteristics of Si in blast furnace pig iron and calibration methods in the detection by laser-induced breakdown spectroscopy

NASA Astrophysics Data System (ADS)

Mei, Yaguang; Cheng, Yuxin; Cheng, Shusen; Hao, Zhongqi; Guo, Lianbo; Li, Xiangyou; Zeng, Xiaoyan

2017-10-01

During the iron-making process in blast furnace, the Si content in liquid pig iron was usually used to evaluate the quality of liquid iron and thermal state of blast furnace. None effective method was found for rapid detecting the Si concentration of liquid iron. Laser-induced breakdown spectroscopy (LIBS) is a kind of atomic emission spectrometry technology based on laser ablation. Its obvious advantage is realizing rapid, in-situ, online analysis of element concentration in open air without sample pretreatment. The characteristics of Si in liquid iron were analyzed from the aspect of thermodynamic theory and metallurgical technology. The relationship between Si and C, Mn, S, P or other alloy elements were revealed based on thermodynamic calculation. Subsequently, LIBS was applied on rapid detection of Si of pig iron in this work. During LIBS detection process, several groups of standard pig iron samples were employed in this work to calibrate the Si content in pig iron. The calibration methods including linear, quadratic and cubic internal standard calibration, multivariate linear calibration and partial least squares (PLS) were compared with each other. It revealed that the PLS improved by normalization was the best calibration method for Si detection by LIBS.

STEM employment in the new economy: A labor market segmentation approach

NASA Astrophysics Data System (ADS)

Torres-Olave, Blanca M.

The present study examined the extent to which the U.S. STEM labor market is stratified in terms of quality of employment. Through a series of cluster analyses and Chi-square tests on data drawn from the 2008 Survey of Income Program Participation (SIPP), the study found evidence of segmentation in the highly-skilled STEM and non-STEM samples, which included workers with a subbaccalaureate diploma or above. The cluster analyses show a pattern consistent with Labor Market Segmentation theory: Higher wages are associated with other primary employment characteristics, including health insurance and pension benefits, as well as full-time employment. In turn, lower wages showed a tendency to cluster with secondary employment characteristics, such as part-time employment, multiple employment, and restricted access to health insurance and pension benefits. The findings also suggest that women have a higher likelihood of being employed in STEM jobs with secondary characteristics. The findings reveal a far more variegated employment landscape than is usually presented in national reports of the STEM workforce. There is evidence that, while STEM employment may be more resilient than non-STEM employment to labor restructuring trends in the new economy, the former is far from immune to secondary labor characteristics. There is a need for ongoing dialogue between STEM education (at all levels), employers, policymakers, and other stakeholders to truly understand not only the barriers to equity in employment relations, but also the mechanisms that create and maintain segmentation and how they may impact women, underrepresented minorities, and the foreign-born.

Person factors and work environments of workers who use mobility devices.

PubMed

Gray, David B; Morgan, Kerri A; Gottlieb, Meghan; Hollingsworth, Holly H

2014-01-01

Nearly 25% of people with mobility impairments and limitations who are of working age are employed, yet few studies have examined their perspectives on their jobs or work environments required to complete job tasks. The purpose of this study was to describe the factors that contribute to successful employment for those who use mobility devices. A convenience sample of 132 workers who use power wheelchairs, manual wheelchairs, canes, crutches or walkers. Participants completed an online version of the Mobility Device User Work Survey (MWS). A multivariate analysis and a two-step multiple linear regression analysis were used. Study participants had few secondary health conditions that influenced their work. Employee satisfactoriness to their employers was high. Accessibility of worksites was high. Assistive technologies were inexpensive, and personal assistance was used infrequently and usually was unpaid. Co-worker communications were very positive. Flexible work rules and supportive managers were highly valued. Job satisfaction positively correlated with accessibility, work tasks, co-worker communication and work support. The description of work environments of successfully employed mobility device users can provide some useful guidance to employers, vocational rehabilitation (VR) counselors and unemployed mobility device users to balance employee abilities and preferences with the needs of employers.

Occupational Outlook for College Graduates, 1976-77 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

This handbook is a guide to career opportunities in a broad range of occupations for which a college degree is, or is becoming, the usual background for employment. It contains a brief summary of expected changes in the economy, in addition to an analysis of the overall supply and demand situation for college graduates through the mid-1980's. Each…

Evaluating Middle School Students' Spatial-Scientific Performance within Earth/Space Astronomy in Terms of Gender and Race/Ethnicity

ERIC Educational Resources Information Center

Wilhelm, Jennifer; Toland, Michael D.; Cole, Merryn

2017-01-01

Differences were examined between groups of sixth grade students? spatial-scientific development pre/post implementation of an Earth/Space unit. Treatment teachers employed a spatially-integrated Earth/Space curriculum, while control teachers implemented their Business as Usual (BAU) Earth/Space units. A multi-level modeling approach was used in a…

Refinement and Field Test of Evaluation Procedures and Materials for ESEA, Title VII Bilingual Education Projects. Phase III Report.

ERIC Educational Resources Information Center

Lam, Tony C. N.; And Others

This report describes an extensive field test of the Bilingual Education Evaluation System (BEES) used to evaluate local level bilingual education projects. Because such projects will usually not be able to implement a traditional true or quasi-experimental design, BEES employs a "gap-reduction" evaluation design that is easily…

Factors Influencing Health Care Access in Rural Health Professional Shortage Areas

DTIC Science & Technology

1992-08-01

CRA&I DTIC TAB1 9 UnannouncedS~~Just f~jpn_ ..__" l• By Distribution /93- 04772 Avi adom a..,.Availability Codes Avail and orDist Special •~-0 1S𔄃...profession. Large group and staff-model Health Maintenance Rural Health 16 Organizations [HMOs) usually provide care at primary HMO sites ald employ NPs

Seasoning small quantities of lumber

Treesearch

E.F. Rasmussen

1965-01-01

The owner of a small quantity of green lumber or logs is often confronted with seasoning it to a state of dryness suitable for use in furniture, wood carving, or other handiwork. He cannot follow the practice of commercial mills, which employ dry kilns for the purpose. because kilns are too costly. On the other hand, air seasoning outdoors usually does not dry lumber...

Countermeasures to Insider Cyber Threats for Turkish General Command of Gendarmerie

DTIC Science & Technology

2016-09-01

problems 12 related to disorder (driving while intoxicated, arrests, debt). (Band et al., 2006, p. 76) Personality problems include “ self - esteem ...expectations of others, arrogance, personal conflicts, fearful of usually routine experiences, compensatory behaviors designed to enhance self - esteem ...rules There are fewer self -employed people Better at invention, worse at implementation Motivation by achievement and esteem or belonging

Ten Years of the Workforce Investment Act (WIA): Interpreting the Research on WIA and Related Programs

ERIC Educational Resources Information Center

Decker, Paul T.; Berk, Jillian A.

2011-01-01

In 1998, President Clinton signed the federal Workforce Investment Act (WIA). Implemented in 2000, WIA replaced the Job Partnership Training Act (JTPA) as the primary federal job training program. Congress viewed WIA as a way to end "business as usual" in the workforce investment system. WIA aimed to transform the employment and training…

The Emerging Attitudes and Motivations of Workers. Labor/Management Programme.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France). Directorate for Scientific Affairs.

The worker born after 1945, whose generation will soon make up the majority in industrial employment, is usually better educated than his father and his education has often been different in kind too. There has been more emphasis on teaching children to develop their own personality and to question what they find in society, and less emphasis on…

New vistas in transmetalation with discrete "AgCF₃" species: Implications in Pd-mediated trifluoromethylation reactions.

PubMed

Perez-Temprano, Monica Helvia; Martínez de Salinas, Sara; Mudarra, Angel Luis; Benet-Buchholz, Jordi; Parella, Teodor; Maseras, Feliu

2018-05-23

This work describes the employment of discrete "AgCF₃" complexes, including unique (Cat)[Ag(CF₃)₂] salts, as efficient transmetalating agents to PdII in order to tackle some of the usually overshadowed limitations related to this step within the trifluoromethylation area. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Embedding the Positive Behavioral Interventions and Supports Framework into the Complex Array of Practices within Alternative Education Settings: A Decision-Making Process

ERIC Educational Resources Information Center

Jolivette, Kristine; McDaniel, Sara C.; Sprague, Jeffrey; Swain-Bradway, Jessica; Ennis, Robin Parks

2012-01-01

Alternative education (AE) programs and schools usually serve distinct populations of students with educational disabilities and mental health or other needs. AE program staff often employ a range of curricula, interventions, and strategies that form an eclectic approach to addressing student needs. This may result in practices that are…

Who is the Effective Volunteer: Characteristics of Successful Big Brothers.

ERIC Educational Resources Information Center

Thorelli, Irene M.; Appel, Victor H.

The demographic characteristics of the typical volunteer, taken from the personnel files of 208 current and previous volunteers of a Big Brothers agency, indicate the following profile. The modal Big Brother is usually Anglo-American, is a young adult aged 18 to 25, is a student or a full-time employed person, has some college education, lives in…

Occupational acral dermatitis and where the twain shall meet.

PubMed

Wolf, Ronni; Parish, Lawrence Charles; Tüzün, Yalçın

This contribution, which is somewhat of a departure from the usual format, will focus on dermatologic conditions that are consequences of the patients' choices of employment, hobby, or even other forms of recreation. Most of the cutaneous changes involve the hands and feet, and each is labeled according to the anatomic location. Copyright © 2017 Elsevier Inc. All rights reserved.

Exploration of Mnemonics for ESL/EFL Vocabulary: Employing the Depth and Elaboration of Processing Theory

ERIC Educational Resources Information Center

Lv, Wenpeng; Young, Barbara Newman

2015-01-01

Sound, form, meaning, and usage are four essentials of a word. English is alphabetic in its writing system. A word's pronunciation is usually connected with its form; however, the relationship between sound and meaning has been controversial throughout the ages. Vocabulary mnemonics differ from each other in their primary focus of attention.…

Internet-Based Cognitive Behavioral Therapy for Insomnia: A Health Economic Evaluation

PubMed Central

Thiart, Hanne; Ebert, David Daniel; Lehr, Dirk; Nobis, Stephanie; Buntrock, Claudia; Berking, Matthias; Smit, Filip; Riper, Heleen

2016-01-01

Study Objectives: Lost productivity caused by insomnia is a common and costly problem for employers. Although evidence for the efficacy of Internet-based cognitive behavioral therapy for insomnia (iCBT-I) already exists, little is known about its economic effects. This study aims to evaluate the cost-effectiveness and cost-benefit of providing iCBT-I to symptomatic employees from the employer's perspective. Methods: School teachers (N = 128) with clinically significant insomnia symptoms and work-related rumination were randomized to guided iCBT-I or a waitlist-control-group, both with access to treatment as usual. Economic data were collected at baseline and 6-mo follow-up. We conducted (1) a cost-effectiveness analysis with treatment response (Reliable Change [decline of 5.01 points] and Insomnia Severity Index < 8 at 6-month follow-up) as the outcome and (2) a cost-benefit analysis. Because both analyses were performed from the employer's perspective, we focused specifically on absenteeism and presenteeism costs. Statistical uncertainty was estimated using bootstrapping. Results: Assuming intervention costs of €200 ($245), cost-effectiveness analyses showed that at a willingness-to-pay of €0 for each positive treatment response, there is an 87% probability that the intervention is more cost effective than treatment as usual alone. Cost-benefit analyses led to a net benefit of €418 (95% confidence interval: −593.03 to 1,488.70) ($512) per participant and a return on investment of 208% (95% confidence interval: −296.52 to 744.35). The reduction in costs was mainly driven by the effects of the intervention on presenteeism and to a lesser degree by reduced absenteeism. Conclusions: Focusing on sleep improvement using iCBT-I may be a cost-effective strategy in occupational health care. Clinical Trials Registration: Title: Online Recovery Training for Better Sleep in Teachers with High Psychological Strain. German Clinical Trial Register (DRKS), URL: https://drks-neu.uniklinik-freiburg.de/drks_web/navigate.do?navigationId=trial.HTML&TRIAL_ID=DRKS00004700. Identifier: DRKS00004700. Commentary: A commentary on this article appears in this issue on page 1767. Citation: Thiart H, Ebert DD, Lehr D, Nobis S, Buntrock C, Berking M, Smit F, Riper H. Internet-based cognitive behavioral therapy for insomnia: a health economic evaluation. SLEEP 2016;39(10):1769–1778. PMID:27450686

Proposed principles of maximum local entropy production.

PubMed

Ross, John; Corlan, Alexandru D; Müller, Stefan C

2012-07-12

Articles have appeared that rely on the application of some form of "maximum local entropy production principle" (MEPP). This is usually an optimization principle that is supposed to compensate for the lack of structural information and measurements about complex systems, even systems as complex and as little characterized as the whole biosphere or the atmosphere of the Earth or even of less known bodies in the solar system. We select a number of claims from a few well-known papers that advocate this principle and we show that they are in error with the help of simple examples of well-known chemical and physical systems. These erroneous interpretations can be attributed to ignoring well-established and verified theoretical results such as (1) entropy does not necessarily increase in nonisolated systems, such as "local" subsystems; (2) macroscopic systems, as described by classical physics, are in general intrinsically deterministic-there are no "choices" in their evolution to be selected by using supplementary principles; (3) macroscopic deterministic systems are predictable to the extent to which their state and structure is sufficiently well-known; usually they are not sufficiently known, and probabilistic methods need to be employed for their prediction; and (4) there is no causal relationship between the thermodynamic constraints and the kinetics of reaction systems. In conclusion, any predictions based on MEPP-like principles should not be considered scientifically founded.

The future for electrocoagulation as a localised water treatment technology.

PubMed

Holt, Peter K; Barton, Geoffrey W; Mitchell, Cynthia A

2005-04-01

Electrocoagulation is an electrochemical method of treating polluted water whereby sacrificial anodes corrode to release active coagulant precursors (usually aluminium or iron cations) into solution. Accompanying electrolytic reactions evolve gas (usually as hydrogen bubbles) at the cathode. Electrocoagulation has a long history as a water treatment technology having been employed to remove a wide range of pollutants. However electrocoagulation has never become accepted as a 'mainstream' water treatment technology. The lack of a systematic approach to electrocoagulation reactor design/operation and the issue of electrode reliability (particularly passivation of the electrodes over time) have limited its implementation. However recent technical improvements combined with a growing need for small-scale decentralised water treatment facilities have led to a re-evaluation of electrocoagulation. Starting with a review of electrocoagulation reactor design/operation, this article examines and identifies a conceptual framework for electrocoagulation that focuses on the interactions between electrochemistry, coagulation and flotation. In addition detailed experimental data are provided from a batch reactor system removing suspended solids together with a mathematical analysis based on the 'white water' model for the dissolved air flotation process. Current density is identified as the key operational parameter influencing which pollutant removal mechanism dominates. The conclusion is drawn that electrocoagulation has a future as a decentralised water treatment technology. A conceptual framework is presented for future research directed towards a more mechanistic understanding of the process.

A Therapeutic Workplace for the Long-Term Treatment of Drug Addiction and Unemployment: Eight-Year Outcomes of a Social Business Intervention

PubMed Central

Aklin, Will M.; Wong, Conrad J.; Hampton, Jacqueline; Svikis, Dace S.; Stitzer, Maxine L.; Bigelow, George E.; Silverman, Kenneth

2014-01-01

This study evaluated the long-term effects of a Therapeutic Workplace social business on drug abstinence and employment. Pregnant and postpartum women (N=40) enrolled in methadone treatment were randomly assigned to a Therapeutic Workplace or Usual Care Control group. Therapeutic Workplace participants could work weekdays in training and then as employees of a social business, but were required to provide drug-free urine samples to work and maintain maximum pay. Three-year outcomes were reported previously. This paper reports 4- to 8- year outcomes. During year 4 when the business was open, Therapeutic Workplace participants provided significantly more cocaine- and opiate-negative urine samples than controls; reported more days employed, higher employment income, and less money spent on drugs. During the 3 years after the business closed, Therapeutic Workplace participants only reported higher income than controls. A Therapeutic Workplace social business can maintain long-term abstinence and employment, but additional intervention may be required to sustain effects. PMID:25124257

Economic Evaluation of a Web-Based Guided Self-Help Intervention for Employees With Depressive Symptoms: Results of a Randomized Controlled Trial.

PubMed

Geraedts, Anna S; van Dongen, Johanna M; Kleiboer, Annet M; Wiezer, Noortje M; van Mechelen, Willem; Cuijpers, Pim; Bosmans, Judith E

2015-06-01

To evaluate the cost-effectiveness of a Web-based guided intervention compared with care as usual for employees with depressive symptoms. A total of 231 employees with depressive symptoms were randomized. Data were collected at baseline, 8 weeks, 6 months, and 12 months. Analyses were conducted from the societal and employer's perspective. At 12 months, a significant intervention effect on depressive symptoms was found. At a willingness to pay of 0 (€/unit of effect), the intervention's probabilities of cost-effectiveness were 0.62 (societal perspective) and 0.55 (employer's perspective). There was a 0.63 probability that the intervention resulted in a positive financial return for the employer. The intervention's cost-effectiveness with regard to depressive symptoms depends on the willingness to pay of societal and company decision makers as well as the probability of cost-effectiveness that they consider acceptable. The intervention is not cost-saving to the employer.

Breasts for hire and shared breastfeeding: wet nursing and cross feeding in Australia, 1900-2000.

PubMed

Thorley, Virginia

2008-01-01

Wet nursing and cross-nursing both involve the breastfeeding of a baby by someone who is not the baby's mother. They differ in that wet nurses were usually employees in paid situations and the breastfeeding was not reciprocated, whereas cross-nursing was between peers and was usually unpaid and could be reciprocal. In Australia at the turn of the twentieth century wet nurses were employed in private homes or institutions. By the 1920s, finding a wet nurse had become extremely difficult, but informal cross-feeding existed long after this. This study examines both practices in twentieth century Australia, 1900-2000, and includes a discussion of the decline of human milk banks, another means of sharing mothers' milk.

Videoscopic assessment of the maintenance status of gamma radiography exposure containers employed in Brazil.

PubMed

Candeias, J P; Estrada, J J S; Pinho, A S; D'Avila, R L; Ramalho, A T

2007-03-01

Industrial radiography is the most frequent method of non-destructive testing (NDT) used by Brazilian industrial facilities for investigating the material integrity of a test object. In Brazil, industrial radiography employs around 220 x-ray and 290 gamma radiography machines. About 90% of the latter uses iridium ((192)Ir) sources. The large majority of (192)Ir projectors in operation in Brazil have been in continuous usage for more than 25 years, which means that they are old and worn-out. Usually the majority of accidents concerning gamma radiography occur during the return of the source into the exposure container. Poor maintenance or imperfections of the internal channel of the exposure container can lead to accidental source exposure. In the present work the internal tube of 65 gamma machines from nine Brazilian companies that render gamma radiography services were analysed using an industrial videoscope. The internal images from the projectors were compared with the internal image of an apparatus that had never been used, i.e. has never received a radioactive source. From the 65 machines evaluated, nine showed irregularities of the internal tube. It was also observed that each company follows a different methodology for the maintenance and lubrication of the exposure containers and drive cables.

Using web-based observations to identify thresholds of a person's stability in a flow

NASA Astrophysics Data System (ADS)

Milanesi, L.; Pilotti, M.; Bacchi, B.

2016-10-01

Flood risk assessment and mitigation are important tasks that should take advantage of rational vulnerability models to increase their effectiveness. These models are usually identified through a relevant set of laboratory experiments. However, there is growing evidence that these tests are not fully representative of the variety of conditions that characterize real flood hazard situations. This paper suggests a citizen science-based and innovative approach to obtain information from web resources for the calibration of people's vulnerability models. A comprehensive study employing commonly used web engines allowed the collection of a wide set of documents showing real risk situations for people impacted by floods, classified according to the stability of the involved subjects. A procedure to extrapolate the flow depth and velocity from the video frames is developed and its reliability is verified by comparing the results with observation. The procedure is based on the statistical distribution of the population height employing a direct uncertainty propagation method. The results complement the experimental literature data and conceptual models. The growing availability of online information will progressively increase the sample size on which the procedure is based and will eventually lead to the identification of a probability surface describing the transition between stability and instability conditions of individuals in a flow.

Analytical tools employed to determine pharmaceutical compounds in wastewaters after application of advanced oxidation processes.

PubMed

Afonso-Olivares, Cristina; Montesdeoca-Esponda, Sarah; Sosa-Ferrera, Zoraida; Santana-Rodríguez, José Juan

2016-12-01

Today, the presence of contaminants in the environment is a topic of interest for society in general and for the scientific community in particular. A very large amount of different chemical substances reaches the environment after passing through wastewater treatment plants without being eliminated. This is due to the inefficiency of conventional removal processes and the lack of government regulations. The list of compounds entering treatment plants is gradually becoming longer and more varied because most of these compounds come from pharmaceuticals, hormones or personal care products, which are increasingly used by modern society. As a result of this increase in compound variety, to address these emerging pollutants, the development of new and more efficient removal technologies is needed. Different advanced oxidation processes (AOPs), especially photochemical AOPs, have been proposed as supplements to traditional treatments for the elimination of pollutants, showing significant advantages over the use of conventional methods alone. This work aims to review the analytical methodologies employed for the analysis of pharmaceutical compounds from wastewater in studies in which advanced oxidation processes are applied. Due to the low concentrations of these substances in wastewater, mass spectrometry detectors are usually chosen to meet the low detection limits and identification power required. Specifically, time-of-flight detectors are required to analyse the by-products.

Porous composite with negative thermal expansion obtained by photopolymer additive manufacturing

NASA Astrophysics Data System (ADS)

Takezawa, Akihiro; Kobashi, Makoto; Kitamura, Mitsuru

2015-07-01

Additive manufacturing (AM) could be a novel method of fabricating composite and porous materials having various effective performances based on mechanisms of their internal geometries. Materials fabricated by AM could rapidly be used in industrial application since they could easily be embedded in the target part employing the same AM process used for the bulk material. Furthermore, multi-material AM has greater potential than usual single-material AM in producing materials with effective properties. Negative thermal expansion is a representative effective material property realized by designing a composite made of two materials with different coefficients of thermal expansion. In this study, we developed a porous composite having planar negative thermal expansion by employing multi-material photopolymer AM. After measurement of the physical properties of bulk photopolymers, the internal geometry was designed by topology optimization, which is the most effective structural optimization in terms of both minimizing thermal stress and maximizing stiffness. The designed structure was converted to a three-dimensional stereolithography (STL) model, which is a native digital format of AM, and assembled as a test piece. The thermal expansions of the specimens were measured using a laser scanning dilatometer. Negative thermal expansion corresponding to less than -1 × 10-4 K-1 was observed for each test piece of the N = 3 experiment.

Sense-making for intelligence analysis on social media data

NASA Astrophysics Data System (ADS)

Pritzkau, Albert

2016-05-01

Social networks, in particular online social networks as a subset, enable the analysis of social relationships which are represented by interaction, collaboration, or other sorts of influence between people. Any set of people and their internal social relationships can be modelled as a general social graph. These relationships are formed by exchanging emails, making phone calls, or carrying out a range of other activities that build up the network. This paper presents an overview of current approaches to utilizing social media as a ubiquitous sensor network in the context of national and global security. Exploitation of social media is usually an interdisciplinary endeavour, in which the relevant technologies and methods are identified and linked in order ultimately demonstrate selected applications. Effective and efficient intelligence is usually accomplished in a combined human and computer effort. Indeed, the intelligence process heavily depends on combining a human's flexibility, creativity, and cognitive ability with the bandwidth and processing power of today's computers. To improve the usability and accuracy of the intelligence analysis we will have to rely on data-processing tools at the level of natural language. Especially the collection and transformation of unstructured data into actionable, structured data requires scalable computational algorithms ranging from Artificial Intelligence, via Machine Learning, to Natural Language Processing (NLP). To support intelligence analysis on social media data, social media analytics is concerned with developing and evaluating computational tools and frameworks to collect, monitor, analyze, summarize, and visualize social media data. Analytics methods are employed to extract of significant patterns that might not be obvious. As a result, different data representations rendering distinct aspects of content and interactions serve as a means to adapt the focus of the intelligence analysis to specific information requests.

Univariate Time Series Prediction of Solar Power Using a Hybrid Wavelet-ARMA-NARX Prediction Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nazaripouya, Hamidreza; Wang, Yubo; Chu, Chi-Cheng

This paper proposes a new hybrid method for super short-term solar power prediction. Solar output power usually has a complex, nonstationary, and nonlinear characteristic due to intermittent and time varying behavior of solar radiance. In addition, solar power dynamics is fast and is inertia less. An accurate super short-time prediction is required to compensate for the fluctuations and reduce the impact of solar power penetration on the power system. The objective is to predict one step-ahead solar power generation based only on historical solar power time series data. The proposed method incorporates discrete wavelet transform (DWT), Auto-Regressive Moving Average (ARMA)more » models, and Recurrent Neural Networks (RNN), while the RNN architecture is based on Nonlinear Auto-Regressive models with eXogenous inputs (NARX). The wavelet transform is utilized to decompose the solar power time series into a set of richer-behaved forming series for prediction. ARMA model is employed as a linear predictor while NARX is used as a nonlinear pattern recognition tool to estimate and compensate the error of wavelet-ARMA prediction. The proposed method is applied to the data captured from UCLA solar PV panels and the results are compared with some of the common and most recent solar power prediction methods. The results validate the effectiveness of the proposed approach and show a considerable improvement in the prediction precision.« less

SheppHeartCABG trial—comprehensive early rehabilitation after coronary artery bypass grafting: a protocol for a randomised clinical trial

PubMed Central

Moons, Philip; Hansen, Niels Viggo; La Cour, Søren; Olsen, Peter Skov; Gluud, Christian; Winkel, Per; Lindschou, Jane; Thygesen, Lau Caspar; Egerod, Ingrid; Berg, Selina Kikkenborg

2017-01-01

Introduction Patients undergoing coronary artery bypass graft surgery often experience a range of symptoms. Studies indicate that non-pharmacological interventions such as exercise training and psychoeducation have a positive physiological and psychological effect in early outpatient rehabilitation. The SheppHeartCABG trial will investigate the effect of early comprehensive rehabilitation in early phase rehabilitation versus usual care. The aim of this paper is to present the protocol for the SheppHeartCABG trial. Methods/analysis SheppHeartCABG is an investigator-initiated randomised clinical superiority trial with blinded outcome assessment, employing 1:1 central randomisation to rehabilitation plus usual care versus usual care alone. On the basis of a sample size calculation, 326 patients undergoing coronary artery bypass grafting will be included from two clinical sites. All patients receive usual care and patients allocated to the experimental intervention follow 4 weeks rehabilitation consisting of an exercise programme, psycho-educative consultations and a compact mindfulness programme. The primary outcome is physical function measured by the 6-min walk test. The secondary outcomes are mental health and physical activity measured by the Medical Outcome Study Short Form (SF-12), anxiety and depression measured by the Hospital Anxiety and Depression Scale questionnaire, physical, emotional and global scores by the HeartQoL questionnaire, sleep measured by the Pittsburgh Sleep Quality Index, pain measured by the Örebro Musculoskeletal Screening Questionnaire and muscle endurance measured by the sit-to-stand test. A number of explorative analyses will also be conducted. Ethics and dissemination SheppHeartCABG is approved by the regional ethics committee (no. H-4-2014-109) and the Danish Data Protection Agency (no. 30-1309) and is performed in accordance with good clinical practice and the Declaration of Helsinki in its latest form. Positive, neutral and negative results of the trial will be submitted to international peer-reviewed journals. Furthermore, results will be presented at national and international conferences relevant to the subject fields. Trial registration number NCT02290262; pre-results. PMID:28096255

Overhead drilling: Comparing three bases for aligning a drilling jig to vertical

PubMed Central

Rempel, David; Star, Demetra; Barr, Alan; Janowitz, Ira

2010-01-01

Problem Drilling overhead into concrete or metal ceilings is a strenuous task done by construction workers to hang ductwork, piping, and electrical equipment. The task is associated with upper body pain and musculoskeletal disorders. Previously, we described a field usability evaluation of a foot lever and inverted drill press intervention devices that were compared to the usual method for overhead drilling. Both interventions were rated as inferior to the usual method based on poor setup time and mobility. Method Three new interventions, which differed on the design used for aligning the drilling column to vertical, were compared to the usual method for overhead drilling by commercial construction workers (n=16). Results The usual method was associated with the highest levels of regional body fatigue and the poorest usability ratings when compared to the three interventions. Conclusion Overall, the ‘Collar Base’ intervention design received the best usability ratings. Impact on Industry Intervention designs developed for overhead drilling may reduce shoulder fatigue and prevent subsequent musculoskeletal disorders. These designs may also be useful for other overhead work such as lifting and supporting materials (e.g., piping, ducts) that are installed near the ceiling. Workplace health and safety interventions may require multiple rounds of field-testing prior to achieving acceptable usability ratings by the end users. PMID:20630276

Silica dust exposures during selected construction activities.

PubMed

Flanagan, Mary Ellen; Seixas, Noah; Majar, Maria; Camp, Janice; Morgan, Michael

2003-01-01

This study characterized exposure for dust-producing construction tasks. Eight common construction tasks were evaluated for quartz and respirable dust exposure by collecting 113 personal task period samples for cleanup; demolition with handheld tools; concrete cutting; concrete mixing; tuck-point grinding; surface grinding; sacking and patching concrete; and concrete floor sanding using both time-integrating filter samples and direct-reading respirable dust monitors. The geometric mean quartz concentration was 0.10 mg/m(3) (geometric standard deviation [GSD]=4.88) for all run time samples, with 71% exceeding the threshold limit value. Activities with the highest exposures were surface grinding, tuck-point grinding, and concrete demolition (GM[GSD] of 0.63[4.12], 0.22[1.94], and 0.10[2.60], respectively). Factors recorded each minute were task, tool, work area, respiratory protection and controls used, estimated cross draft, and whether anyone nearby was making dust. Factors important to exposure included tool used, work area configuration, controls employed, cross draft, and in some cases nearby dust. More protective respirators were employed as quartz concentration increased, although respiratory protection was found to be inadequate for 42% of exposures. Controls were employed for only 12% of samples. Exposures were reduced with three controls: box fan for surface grinding and floor sanding, and vacuum/shroud for surface grinding, with reductions of 57, 50, and 71%, respectively. Exposures were higher for sweeping compound, box fan for cleanup, ducted fan dilution, and wetted substrate. Construction masons and laborers are frequently overexposed to silica. The usual protection method, respirators, was not always adequate, and engineering control use was infrequent and often ineffective.

Brief Report: Disposable Income, and Spending on Fast Food, Alcohol, Cigarettes, and Gambling by New Zealand Secondary School Students

ERIC Educational Resources Information Center

Darling, Helen; Reeder, Anthony I.; McGee, Rob; Williams, Sheila

2006-01-01

We describe self-reported sources of income and expenditure, and the association between part-time employment and spending on fast food, alcohol, cigarettes, and gambling for a sample of 3434 New Zealand (NZ) secondary school students (mean age 15.0 years). Disposable income was usually received from parents and guardians, but nearly 40% of…

[Non-randomized evaluation studies (TREND)].

PubMed

Vallvé, Carles; Artés, Maite; Cobo, Erik

2005-12-01

Nonrandomized intervention trials are needed when randomized clinical trials cannot be performed. To report the results from nonrandomized intervention studies transparently, the TREND (Transparent Reporting of Evaluations with Nonrandomized Designs) checklist should be used. This implies that nonrandomized studies should follow the remaining methodological tools usually employed in randomized trials and that the uncertainty introduced by the allocation mechanism should be explicitly reported and, if possible, quantified.

Spin-Polarized Tunneling at Interfaces Between Oxides and Metals or Semiconductors

DTIC Science & Technology

2006-09-01

solution 3 3. Several miscellaneous compounds , including molecular oxygen and organic biradicals 4. Metals When a variable magnetic field is...substrate layer) Heusler alloys are considered to be prime candidates, because they show great potential for spin-injection contacts to compound and...usually employ simple parabolic bands and/or momentum and energy independent tunneling matrix elements. The classical theory of tunneling assumes that the

Investing in America's Data Science and Analytics Talent: The Case for Action

ERIC Educational Resources Information Center

Business-Higher Education Forum, 2017

2017-01-01

Increasingly US jobs require data science and analytics skills. Can we meet the demand? The current shortage of skills in the national job pool demonstrates that business-as-usual strategies won't satisfy the growing need. If we are to unlock the promise and potential of data and all the technologies that depend on it, employers and educators will…

Broadening of Graduate Practicums (An overview of how Jacksonville State University increased the practical experiences available to employed Master's level students).

ERIC Educational Resources Information Center

Frith, Greg

Educators agree that the interaction of teachers in training with exceptional children through the medium of practicums or internships is an essential component of every teacher education program. At the undergraduate level, where the student is usually pursuing a degree on a full time basis, ample opportunities exist for interaction with…

Return to work in sick-listed cancer survivors with job loss: design of a randomised controlled trial.

PubMed

van Egmond, Martine P; Duijts, Saskia F A; Vermeulen, Sylvia J; van der Beek, Allard J; Anema, Johannes R

2015-02-18

Despite long-term or permanent health problems, cancer survivors are often motivated to return to work. For cancer survivors who have lost their job, return to work can be more challenging compared to employed survivors, as they generally find themselves in a more vulnerable social and financial position. Cancer survivors with job loss may therefore be in need of tailored return to work support. However, there is a lack of return to work intervention programs specifically targeting these cancer survivors. The number of cancer survivors with job loss in developed countries is rising due to, amongst others, increases in the incidence and survivor rate of cancer, the retirement age and the proportion of flexible employment contracts. Hence, we consider it important to develop a tailored return to work intervention program for cancer survivors with job loss, and to evaluate its effectiveness compared to usual care. This study employs a two-armed randomised controlled trial with a follow-up period of 12 months. The study population (n = 164) will be recruited from a national sample of cancer survivors (18-60 years), who have been sick-listed for 12-36 months. Participants will be randomised by using computerized blocked randomisation (blocks of four). All participants will receive usual care as provided by the Dutch Social Security Agency. Additionally, participants in the intervention group will receive a tailored return to work intervention program, which includes vocational rehabilitation and supportive psychosocial components, as well as (therapeutic) placement at work. The primary outcome measure is duration until sustainable return to work; the secondary outcome measure is rate of return to work. Other parameters include, amongst others, fatigue, coping strategy and quality of life. We will perform Cox regression analyses to estimate hazard ratios for time to sustainable return to work. The hypothesis of this study is that a tailored approach for cancer survivors with job loss is more effective, regarding return to work, compared to usual care. The results of this study will provide insight into the ways in which return to work can be facilitated for cancer survivors with job loss. Netherlands Trial Register: NTR3562 .

Effects of Housing First on Employment and Income of Homeless Individuals: Results of a Randomized Trial.

PubMed

Poremski, Daniel; Stergiopoulos, Vicky; Braithwaite, Erika; Distasio, Jino; Nisenbaum, Rosane; Latimer, Eric

2016-06-01

Housing First is emerging as an evidence-based practice for housing and supporting people who are homeless and have a mental illness. The objective of this study was to determine whether Housing First increases the odds of obtaining competitive employment in this population and affects income, including income from informal and illegal sources. A total of 2,148 people with a mental illness were recruited from five Canadian cities while they were homeless, classified as having moderate or high needs, and randomly assigned to Housing First or usual care. Housing First participants with high needs received assertive community treatment (ACT), and those with moderate needs received intensive case management (ICM). Every three months, participants were interviewed about employment and earnings in the previous months (median follow-up=745 days). Regression models were estimated via generalized estimating equations. ICM recipients had lower odds of obtaining employment compared with the control group with moderate needs. The odds of obtaining employment among ICM recipients increased but their employment rate never exceeded that of the control group. For ACT recipients, the odds of obtaining employment were not significantly different from those of the control group. Among Housing First participants, persons employed at baseline, men, and younger participants had greater odds of employment compared with control participants. Housing First did not appear to significantly increase income. This was the first large-scale randomized controlled study of Housing First's effects on employment. Further research is needed to determine how Housing First may be enhanced to increase odds of obtaining employment.

Inductively Coupled Plasma Optical Emission Spectrometry for Rare Earth Elements Analysis

NASA Astrophysics Data System (ADS)

He, Man; Hu, Bin; Chen, Beibei; Jiang, Zucheng

2017-01-01

Inductively coupled plasma optical emission spectrometry (ICP-OES) merits multielements capability, high sensitivity, good reproducibility, low matrix effect and wide dynamic linear range for rare earth elements (REEs) analysis. But the spectral interference in trace REEs analysis by ICP-OES is a serious problem due to the complicated emission spectra of REEs, which demands some correction technology including interference factor method, derivative spectrum, Kalman filtering algorithm and partial least-squares (PLS) method. Matrix-matching calibration, internal standard, correction factor and sample dilution are usually employed to overcome or decrease the matrix effect. Coupled with various sample introduction techniques, the analytical performance of ICP-OES for REEs analysis would be improved. Compared with conventional pneumatic nebulization (PN), acid effect and matrix effect are decreased to some extent in flow injection ICP-OES, with higher tolerable matrix concentration and better reproducibility. By using electrothermal vaporization as sample introduction system, direct analysis of solid samples by ICP-OES is achieved and the vaporization behavior of refractory REEs with high boiling point, which can easily form involatile carbides in the graphite tube, could be improved by using chemical modifier, such as polytetrafluoroethylene and 1-phenyl-3-methyl-4-benzoyl-5-pyrazone. Laser ablation-ICP-OES is suitable for the analysis of both conductive and nonconductive solid samples, with the absolute detection limit of ng-pg level and extremely low sample consumption (0.2 % of that in conventional PN introduction). ICP-OES has been extensively employed for trace REEs analysis in high-purity materials, and environmental and biological samples.

Effects of volcano topography on seismic broad-band waveforms

NASA Astrophysics Data System (ADS)

Neuberg, Jürgen; Pointer, Tim

2000-10-01

Volcano seismology often deals with rather shallow seismic sources and seismic stations deployed in their near field. The complex stratigraphy on volcanoes and near-field source effects have a strong impact on the seismic wavefield, complicating the interpretation techniques that are usually employed in earthquake seismology. In addition, as most volcanoes have a pronounced topography, the interference of the seismic wavefield with the stress-free surface results in severe waveform perturbations that affect seismic interpretation methods. In this study we deal predominantly with the surface effects, but take into account the impact of a typical volcano stratigraphy as well as near-field source effects. We derive a correction term for plane seismic waves and a plane-free surface such that for smooth topographies the effect of the free surface can be totally removed. Seismo-volcanic sources radiate energy in a broad frequency range with a correspondingly wide range of different Fresnel zones. A 2-D boundary element method is employed to study how the size of the Fresnel zone is dependent on source depth, dominant wavelength and topography in order to estimate the limits of the plane wave approximation. This approximation remains valid if the dominant wavelength does not exceed twice the source depth. Further aspects of this study concern particle motion analysis to locate point sources and the influence of the stratigraphy on particle motions. Furthermore, the deployment strategy of seismic instruments on volcanoes, as well as the direct interpretation of the broad-band waveforms in terms of pressure fluctuations in the volcanic plumbing system, are discussed.

Plasma-assisted catalytic storage reduction system

DOEpatents

Penetrante, Bernardino M.; Vogtlin, George E.; Merritt, Bernard T.; Brusasco, Raymond M.

2000-01-01

A two-stage method for NO.sub.x reduction in an oxygen-rich engine exhaust comprises a plasma oxidative stage and a storage reduction stage. The first stage employs a non-thermal plasma treatment of NO.sub.x gases in an oxygen-rich exhaust and is intended to convert NO to NO.sub.2 in the presence of O.sub.2 and hydrocarbons. The second stage employs a lean NO.sub.x trap to convert such NO.sub.2 to environmentally benign gases that include N.sub.2, CO.sub.2, and H.sub.2 O. By preconverting NO to NO.sub.2 in the first stage with a plasma, the efficiency of the second stage for NO.sub.x reduction is enhanced. For example, an internal combustion engine exhaust is connected by a pipe to a first chamber in which a non-thermal plasma converts NO to NO.sub.2 in the presence of O.sub.2 and hydrocarbons, such as propene. A flow of such hydrocarbons (C.sub.x H.sub.y) is input from usually a second pipe into at least a portion of the first chamber. The NO.sub.2 from the plasma treatment proceeds to a storage reduction catalyst (lean NO.sub.x trap) that converts NO.sub.2 to N.sub.2, CO.sub.2, and H.sub.2 O, and includes a nitrate-forming catalytic site. The hydrocarbons and NO.sub.x are simultaneously reduced while passing through the lean-NO.sub.x trap catalyst. The method allows for enhanced NO.sub.x reduction in vehicular engine exhausts, particularly those having relatively high sulfur contents.

Plasma-assisted catalytic storage reduction system

DOEpatents

Penetrante, Bernardino M.; Vogtlin, George E.; Merritt, Bernard T.; Brusasco, Raymond M.

2002-01-01

A two-stage method for NO.sub.x reduction in an oxygen-rich engine exhaust comprises a plasma oxidative stage and a storage reduction stage. The first stage employs a non-thermal plasma treatment of NO.sub.x gases in an oxygen-rich exhaust and is intended to convert NO to NO.sub.2 in the presence of O.sub.2 and hydrocarbons. The second stage employs a lean NO.sub.x trap to convert such NO.sub.2 to environmentally benign gases that include N.sub.2, CO.sub.2, and H.sub.2 O. By preconverting NO to NO.sub.2 in the first stage with a plasma, the efficiency of the second stage for NO.sub.x reduction is enhanced. For example, an internal combustion engine exhaust is connected by a pipe to a first chamber in which a non-thermal plasma converts NO to NO.sub.2 in the presence of O.sub.2 and hydrocarbons, such as propene. A flow of such hydrocarbons (C.sub.x H.sub.y) is input from usually a second pipe into at least a portion of the first chamber. The NO.sub.2 from the plasma treatment proceeds to a storage reduction catalyst (lean NO.sub.x trap) that converts NO.sub.2 to N.sub.2, CO.sub.2, and H.sub.2 O, and includes a nitrate-forming catalytic site. The hydrocarbons and NO.sub.x are simultaneously reduced while passing through the lean-NO.sub.x trap catalyst. The method allows for enhanced NO.sub.x reduction in vehicular engine exhausts, particularly those having relatively high sulfur contents.

Electric vehicles batteries thermal management systems employing phase change materials

NASA Astrophysics Data System (ADS)

Ianniciello, Lucia; Biwolé, Pascal Henry; Achard, Patrick

2018-02-01

Battery thermal management is necessary for electric vehicles (EVs), especially for Li-ion batteries, due to the heat dissipation effects on those batteries. Usually, air or coolant circuits are employed as thermal management systems in Li-ion batteries. However, those systems are expensive in terms of investment and operating costs. Phase change materials (PCMs) may represent an alternative which could be cheaper and easier to operate. In fact, PCMs can be used as passive or semi-passive systems, enabling the global system to sustain near-autonomous operations. This article presents the previous developments introducing PCMs for EVs battery cooling. Different systems are reviewed and solutions are proposed to enhance PCMs efficiency in those systems.

Optimised effective potential for ground states, excited states, and time-dependent phenomena

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gross, E.K.U.

1996-12-31

(1) The optimized effective potential method is a variant of the traditional Kohn-Sham scheme. In this variant, the exchange-correlation energy E{sub xc} is an explicit functional of single-particle orbitals. The exchange-correlation potential, given as usual by the functional derivative v{sub xc} = {delta}E{sub xc}/{delta}{rho}, then satisfies as integral equation involving the single-particle orbitals. This integral equation in solved semi-analytically using a scheme recently proposed by Krieger, Li and Iafrate. If the exact (Fock) exchange-energy functional is employed together with the Colle-Salvetti orbital functional for the correlation energy, the mean absolute deviation of the resulting ground-state energies from the exact nonrelativisticmore » values is CT mH for the first-row atoms, as compared to 4.5 mH in a state-of-the-art CI calculation. The proposed scheme is thus significantly more accurate than the conventional Kohn-Sham method while the numerical effort involved is about the same as for an ordinary Hanree-Fock calculation. (2) A time-dependent generalization of the optimized-potential method is presented and applied to the linear-response regime. Since time-dependent density functional theory leads to a formally exact representation of the frequency-dependent linear density response and since the latter, as a function of frequency, has poles at the excitation energies of the fully interacting system, the formalism is suitable for the calculation of excitation energies. A simple additive correction to the Kohn-Sham single-particle excitation energies will be deduced and first results for atomic and molecular singlet and triplet excitation energies will be presented. (3) Beyond the regime of linear response, the time-dependent optimized-potential method is employed to describe atoms in strong emtosecond laser pulses. Ionization yields and harmonic spectra will be presented and compared with experimental data.« less

Combining the 3D model generated from point clouds and thermography to identify the defects presented on the facades of a building

NASA Astrophysics Data System (ADS)

Huang, Yishuo; Chiang, Chih-Hung; Hsu, Keng-Tsang

2018-03-01

Defects presented on the facades of a building do have profound impacts on extending the life cycle of the building. How to identify the defects is a crucial issue; destructive and non-destructive methods are usually employed to identify the defects presented on a building. Destructive methods always cause the permanent damages for the examined objects; on the other hand, non-destructive testing (NDT) methods have been widely applied to detect those defects presented on exterior layers of a building. However, NDT methods cannot provide efficient and reliable information for identifying the defects because of the huge examination areas. Infrared thermography is often applied to quantitative energy performance measurements for building envelopes. Defects on the exterior layer of buildings may be caused by several factors: ventilation losses, conduction losses, thermal bridging, defective services, moisture condensation, moisture ingress, and structure defects. Analyzing the collected thermal images can be quite difficult when the spatial variations of surface temperature are small. In this paper the authors employ image segmentation to cluster those pixels with similar surface temperatures such that the processed thermal images can be composed of limited groups. The surface temperature distribution in each segmented group is homogenous. In doing so, the regional boundaries of the segmented regions can be identified and extracted. A terrestrial laser scanner (TLS) is widely used to collect the point clouds of a building, and those point clouds are applied to reconstruct the 3D model of the building. A mapping model is constructed such that the segmented thermal images can be projected onto the 2D image of the specified 3D building. In this paper, the administrative building in Chaoyang University campus is used as an example. The experimental results not only provide the defect information but also offer their corresponding spatial locations in the 3D model.

Connecting clinical and actuarial prediction with rule-based methods.

PubMed

Fokkema, Marjolein; Smits, Niels; Kelderman, Henk; Penninx, Brenda W J H

2015-06-01

Meta-analyses comparing the accuracy of clinical versus actuarial prediction have shown actuarial methods to outperform clinical methods, on average. However, actuarial methods are still not widely used in clinical practice, and there has been a call for the development of actuarial prediction methods for clinical practice. We argue that rule-based methods may be more useful than the linear main effect models usually employed in prediction studies, from a data and decision analytic as well as a practical perspective. In addition, decision rules derived with rule-based methods can be represented as fast and frugal trees, which, unlike main effects models, can be used in a sequential fashion, reducing the number of cues that have to be evaluated before making a prediction. We illustrate the usability of rule-based methods by applying RuleFit, an algorithm for deriving decision rules for classification and regression problems, to a dataset on prediction of the course of depressive and anxiety disorders from Penninx et al. (2011). The RuleFit algorithm provided a model consisting of 2 simple decision rules, requiring evaluation of only 2 to 4 cues. Predictive accuracy of the 2-rule model was very similar to that of a logistic regression model incorporating 20 predictor variables, originally applied to the dataset. In addition, the 2-rule model required, on average, evaluation of only 3 cues. Therefore, the RuleFit algorithm appears to be a promising method for creating decision tools that are less time consuming and easier to apply in psychological practice, and with accuracy comparable to traditional actuarial methods. (c) 2015 APA, all rights reserved).

Groundwater Evapotranspiration from Diurnal Water Table Fluctuation: a Modified White Based Method Using Drainable and Fillable Porosity

NASA Astrophysics Data System (ADS)

Acharya, S.; Mylavarapu, R.; Jawitz, J. W.

2012-12-01

In shallow unconfined aquifers, the water table usually shows a distinct diurnal fluctuation pattern corresponding to the twenty-four hour solar radiation cycle. This diurnal water table fluctuation (DWTF) signal can be used to estimate the groundwater evapotranspiration (ETg) by vegetation, a method known as the White [1932] method. Water table fluctuations in shallow phreatic aquifers is controlled by two distinct storage parameters, drainable porosity (or specific yield) and the fillable porosity. Yet, it is implicitly assumed in most studies that these two parameters are equal, unless hysteresis effect is considered. The White based method available in the literature is also based on a single drainable porosity parameter to estimate the ETg. In this study, we present a modification of the White based method to estimate ETg from DWTF using separate drainable (λd) and fillable porosity (λf) parameters. Separate analytical expressions based on successive steady state moisture profiles are used to estimate λd and λf, instead of the commonly employed hydrostatic moisture profile approach. The modified method is then applied to estimate ETg using the DWTF data observed in a field in northeast Florida and the results are compared with ET estimations from the standard Penman-Monteith equation. It is found that the modified method resulted in significantly better estimates of ETg than the previously available method that used only a single, hydrostatic-moisture-profile based λd. Furthermore, the modified method is also used to estimate ETg even during rainfall events which produced significantly better estimates of ETg as compared to the single λd parameter method.

Patterns of non-firearm homicide.

PubMed

Henderson, J P; Morgan, S E; Patel, F; Tiplady, M E

2005-06-01

Sixty-two recent non-firearm homicides dealt with by an inner London public mortuary were studied. The majority of homicides involved stabbing--usually multiple wounds to the trunk. These were followed by blunt instrument homicides--nearly all involved multiple blows to the head, and asphyxiation--usually consisting of strangulation with a ligature being employed in the majority of cases. Homicides tended to occur during the evening and night in spring and early summer. Most victims were found to be in the 20-39 age group, with male victims outnumbering females in a 2:1 ratio. A marked difference in homicide pattern existed between the male and female victims. Males tended to fall victim to strangers encountered while socialising in and around bars and clubs. Females were most often killed by close acquaintances in domestic disputes at home.

Cost-effectiveness of exercise therapy in the treatment of non-specific neck pain and low back pain: a systematic review with meta-analysis.

PubMed

Miyamoto, Gisela Cristiane; Lin, Chung-Wei Christine; Cabral, Cristina Maria Nunes; van Dongen, Johanna M; van Tulder, Maurits W

2018-04-20

To investigate the cost-effectiveness of exercise therapy in the treatment of patients with non-specific neck pain and low back pain. Systematic review of economic evaluations. The search was performed in 5 clinical and 3 economic electronic databases. We included economic evaluations performed alongside randomised controlled trials. Differences in costs and effects were pooled in a meta-analysis, if possible, and incremental cost-utility ratios (ICUR) were descriptively analysed. Twenty-two studies were included. On average, exercise therapy was associated with lower costs and larger effects for quality-adjusted life-year (QALY) in comparison with usual care for subacute and chronic low back pain from a healthcare perspective (based on ICUR). Exercise therapy had similar costs and effect for QALY in comparison with other interventions for neck pain from a societal perspective, and subacute and chronic low back pain from a healthcare perspective. There was limited or inconsistent evidence on the cost-effectiveness of exercise therapy compared with usual care for neck pain and acute low back pain, other interventions for acute low back pain and different types of exercise therapy for neck pain and low back pain. Exercise therapy seems to be cost-effective compared with usual care for subacute and chronic low back pain. Exercise therapy was not (more) cost-effective compared with other interventions for neck pain and low back pain. The cost-utility estimates are rather uncertain, indicating that more economic evaluations are needed. PROSPERO, CRD42017059025. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Method and apparatus for semi-solid material processing

DOEpatents

Han, Qingyou [Knoxville, TN; Jian, Xiaogang [Knoxville, TN; Xu, Hanbing [Knoxville, TN; Meek, Thomas T [Knoxville, TN

2009-02-24

A method of forming a material includes the steps of: vibrating a molten material at an ultrasonic frequency while cooling the material to a semi-solid state to form non-dendritic grains therein; forming the semi-solid material into a desired shape; and cooling the material to a solid state. The method makes semi-solid castings directly from molten materials (usually a metal), produces grain size usually in the range of smaller than 50 .mu.m, and can be easily retrofitted into existing conventional forming machine.

Method and apparatus for semi-solid material processing

DOEpatents

Han, Qingyou [Knoxville, TN; Jian, Xiaogang [Knoxville, TN; Xu, Hanbing [Knoxville, TN; Meek, Thomas T [Knoxville, TN

2009-11-24

A method of forming a material includes the steps of: vibrating a molten material at an ultrasonic frequency while cooling the material to a semi-solid state to form non-dendritic grains therein; forming the semi-solid material into a desired shape; and cooling the material to a solid state. The method makes semi-solid castings directly from molten materials (usually a metal), produces grain size usually in the range of smaller than 50 .mu.m, and can be easily retrofitted into existing conventional forming maching.

Method and apparatus for semi-solid material processing

DOEpatents

Han, Qingyou [Knoxville, TN; Jian, Xiaogang [Knoxville, TN; Xu, Hanbing [Knoxville, TN; Meek, Thomas T [Knoxville, TN

2007-05-15

A method of forming a material includes the steps of: vibrating a molten material at an ultrasonic frequency while cooling the material to a semi-solid state to form non-dendritic grains therein; forming the semi-solid material into a desired shape; and cooling the material to a solid state. The method makes semi-solid castings directly from molten materials (usually a metal), produces grain size usually in the range of smaller than 50 .mu.m, and can be easily retrofitted into existing conventional forming machine.

Paid employment of mothers and fathers of an adult child with multiple disabilities.

PubMed

Einam, M; Cuskelly, M

2002-02-01

Paid employment is increasingly undertaken by mothers as their children age, with the majority of women being in employment by the time their offspring are adult. Opportunities to engage in employment appear to be reduced for mothers of children with disabilities; however, little is known about the employment of mothers or fathers of adults with disabilities. Data were collected regarding the employment decisions of parents of a young adult with multiple disabilities and contrasted with those of parents whose children were all developing normally. Twenty-five mothers and 12 fathers of a young adult with multiple disabilities were interviewed, as were 25 comparison mothers and 19 comparison fathers. Data collected included hours of work, reasons for employment status, attitudes towards work and child care, and psychological well-being. Clear differences were found between the two groups. Mothers and fathers of a child with multiple disabilities showed different engagement patterns with the paid workforce from comparison parents. Hours of work for fathers of a young adult with multiple disabilities showed a bi-modal distribution, with some fathers working fewer hours than usual and others working very long hours. For mothers in both groups, the number of hours in paid employment was negatively associated with reports of psychological problems. Increased attention needs to be given to the employment opportunities of parents of children with disabilities since employment appears to play a protective role for mothers, in particular. Services provided to adults with disabilities will need to change if parents are to have the same life chances as parents without adult offspring with a disability.

Why Third World urban employers usually prefer men.

PubMed

Anker, R; Hein, C

1985-01-01

Males outnumber female employees by 3 to 1 in the modern sector of developing countries; moreover, women tend to be concentrated in a limited number of occupations. This underrepresentation of women in employment in Third World countries is generally attributed to the restricted supply of qualified women willing and able to work away from home in modern sector occupations. However, this approach pays insufficient attention to the demand for labor and the recruitment policy of employers. Employer concerns and perceptions that limit the overall demand for women workers and thereby reduce their employment opportunities include the need for pregnancy and maternity leave and protection, absenteeism, turnover, and cultural restrictions. Among the factors that contribute to the sexual segmentation of the labor market are protective legislation that excludes women from certain sectors of the labor market, sex-typing of jobs, and employer perceptions that women lack muscular strength, are not effective supervisors, and cannot work well with men. At the same time, women are preferred for certain jobs because of their greater docility, acceptance of lower wages, household-type skills, and sex appeal. The general factor limiting employment opportunities for women is the employer's perception that women are more costly and less productive than male employees. This perception is directly related to women's role in childbearing and rearing, and is reinforced by legislation that places the costs of maternity leave, nursing breaks, and child care directly on the employer. Thus, women's childbearing and family responsibilities not only limit their availability for work but also discourage employers from hiring them.

Economic benefit of chemical dependency treatment to employers.

PubMed

Jordan, Neil; Grissom, Grant; Alonzo, Gregory; Dietzen, Laura; Sangsland, Scott

2008-04-01

Using assessment data from the Substance Abuse Treatment Support System, we estimated the economic benefit of chemical dependency treatment to employers. A cohort of individuals (N = 498) treated at Kaiser Permanente's Addiction Medicine programs in Southern California completed assessments before and at least 30 days after treatment began. Compared to intake, subsequent assessments indicated substantial reduction in the number of patients who missed work, were late for work, were less productive than usual at work, and/or had conflict with coworkers or management. The net economic value of these improvements to their employers depended upon the utilization rate of the benefit and the salary level of the employees receiving treatment. For a utilization rate of 0.9% and a mean annual salary of US$45,000, the net benefit of treatment was US$1,538 for > or = 61 days of treatment. Based solely upon these employment-related measures, without factoring in the medical cost offset or indirect benefits of treatment that may help employees to maintain higher levels of productivity, employers break even on an investment of US$30 per member per year for a chemical dependency treatment benefit if the mean annual salary of the employees participating in treatment is US$36,565.