ScreenRecorder: A Utility for Creating Screenshot Video Using Only Original Equipment Manufacturer (OEM) Software on Microsoft Windows Systems

DTIC Science & Technology

2015-01-01

class within Microsoft Visual Studio . 2 It has been tested on and is compatible with Microsoft Vista, 7, and 8 and Visual Studio Express 2008...the ScreenRecorder utility assumes a basic understanding of compiling and running C++ code within Microsoft Visual Studio . This report does not...of Microsoft Visual Studio , the ScreenRecorder utility was developed as a C++ class that can be compiled as a library (static or dynamic) to be

24 CFR 3285.904 - Utility system connections.

Code of Federal Regulations, 2013 CFR

2013-04-01

... must convert the appliance from one type of gas to another, following instructions by the manufacturer... type of gas to be supplied. (3) Connection procedures. Gas-burning appliance vents must be inspected to... concerning the following gas appliance startup procedures: (i) One at a time, opening equipment shutoff...

24 CFR 3285.904 - Utility system connections.

Code of Federal Regulations, 2012 CFR

2012-04-01

... must convert the appliance from one type of gas to another, following instructions by the manufacturer... type of gas to be supplied. (3) Connection procedures. Gas-burning appliance vents must be inspected to... concerning the following gas appliance startup procedures: (i) One at a time, opening equipment shutoff...

24 CFR 3285.904 - Utility system connections.

Code of Federal Regulations, 2014 CFR

2014-04-01

... must convert the appliance from one type of gas to another, following instructions by the manufacturer... type of gas to be supplied. (3) Connection procedures. Gas-burning appliance vents must be inspected to... concerning the following gas appliance startup procedures: (i) One at a time, opening equipment shutoff...

40 CFR 1039.625 - What requirements apply under the program for equipment-manufacturer flexibility?

Code of Federal Regulations, 2010 CFR

2010-07-01

... in this section only if you have primary responsibility for designing and manufacturing equipment and... specifically to companies that manufacture equipment outside the United States and to companies that import such equipment without manufacturing it. Engines and equipment you produce under this section are...

Free-world microelectronic manufacturing equipment

NASA Astrophysics Data System (ADS)

Kilby, J. S.; Arnold, W. H.; Booth, W. T.; Cunningham, J. A.; Hutcheson, J. D.; Owen, R. W.; Runyan, W. R.; McKenney, Barbara L.; McGrain, Moira; Taub, Renee G.

1988-12-01

Equipment is examined and evaluated for the manufacture of microelectronic integrated circuit devices and sources for that equipment within the Free World. Equipment suitable for the following are examined: single-crystal silicon slice manufacturing and processing; required lithographic processes; wafer processing; device packaging; and test of digital integrated circuits. Availability of the equipment is also discussed, now and in the near future. Very adequate equipment for most stages of the integrated circuit manufacturing process is available from several sources, in different countries, although the best and most widely used versions of most manufacturing equipment are made in the United States or Japan. There is also an active market in used equipment, suitable for manufacture of capable integrated circuits with performance somewhat short of the present state of the art.

Dedication file preparation for commercial-grade electric components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendricks, J.R.; Farwell, C.R. Jr.

1988-01-01

Dedication is the process of making a commercial-grade item into a basic component that can be installed in safety systems. This process ensures that the commercially manufactured items are of the same or equivalent form, fit, function, and materials as the originally provided safety item. This process must ensure that the original utility's equipment qualification program is maintained per licensing commitments to 10CFR50.49 and general design criterion No. 4. Today, utilities recognize the need for establishing a dedication program to provide the flexibility in obtaining replacement items directly from the original manufacturers. This need has arisen because (a) most systemmore » houses, large manufacturers, and component manufacturers will sell their products only through distributors as straight commercial-grade items or only service former clients, and (b) lack of competition for specific safety-related items has resulted in excessive hardware cost and very long delivery schedules, which could affect plant availability. The vehicle for utilities to obtain safety-related items is to establish and manage a comprehensive dedication program for their own use or provide the direction for a nuclear supplier to follow. This paper provides both utilities and nuclear suppliers insight into the complexities of a dedication program. This insight is provided from our experience as a utilities agent and as a third-party nuclear supplier.« less

Design for Manufacturing and Assembly in Apparel. Part 1. Handbook

DTIC Science & Technology

1994-02-01

reduced and the inverted pleat was eliminated to take advantage of the automatic seam stitcher . The shape and size of the side back section seam...coin pocket. The size and shape of the pocket would be designed to best utilize the equipment. An automatic dart stitcher may be utilized to stitch the...with stacker Semi-automatic serging units with stacker Automatic seaming units/profile stitchers Programmable seaming units for various operations

Performance measurement integrated information framework in e-Manufacturing

NASA Astrophysics Data System (ADS)

Teran, Hilaida; Hernandez, Juan Carlos; Vizán, Antonio; Ríos, José

2014-11-01

The implementation of Internet technologies has led to e-Manufacturing technologies becoming more widely used and to the development of tools for compiling, transforming and synchronising manufacturing data through the Web. In this context, a potential area for development is the extension of virtual manufacturing to performance measurement (PM) processes, a critical area for decision making and implementing improvement actions in manufacturing. This paper proposes a PM information framework to integrate decision support systems in e-Manufacturing. Specifically, the proposed framework offers a homogeneous PM information exchange model that can be applied through decision support in e-Manufacturing environment. Its application improves the necessary interoperability in decision-making data processing tasks. It comprises three sub-systems: a data model, a PM information platform and PM-Web services architecture. A practical example of data exchange for measurement processes in the area of equipment maintenance is shown to demonstrate the utility of the model.

Improvements in the efficiency of turboexpanders in cryogenic applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agahi, R.R.; Lin, M.C.; Ershaghi, B.

1996-12-31

Process designers have utilized turboexpanders in cryogenic processes because of their higher thermal efficiencies when compared with conventional refrigeration cycles. Process design and equipment performance have improved substantially through the utilization of modern technologies. Turboexpander manufacturers have also adopted Computational Fluid Dynamic Software, Computer Numerical Control Technology and Holography Techniques to further improve an already impressive turboexpander efficiency performance. In this paper, the authors explain the design process of the turboexpander utilizing modern technology. Two cases of turboexpanders processing helium (4.35{degrees}K) and hydrogen (56{degrees}K) will be presented.

Price Estimation Guidelines

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.; Aster, R. W.; Firnett, P. J.; Miller, M. A.

1985-01-01

Improved Price Estimation Guidelines, IPEG4, program provides comparatively simple, yet relatively accurate estimate of price of manufactured product. IPEG4 processes user supplied input data to determine estimate of price per unit of production. Input data include equipment cost, space required, labor cost, materials and supplies cost, utility expenses, and production volume on industry wide or process wide basis.

Applying industrial engineering practices to radiology.

PubMed

Rosen, Len

2004-01-01

Seven hospitals in Oregon and Washington have successfully adopted the Toyota Production System (TPS). Developed by Taiichi Ohno, TPS focuses on finding efficiencies and cost savings in manufacturing processes. A similar effort has occurred in Canada, where Toronto's Hospital for Sick Children has developed a database for its diagnostic imaging department built on the principles of TPS applied to patient encounters. Developed over the last 5 years, the database currently manages all interventional patient procedures for quality assurance, inventory, equipment, and labor. By applying industrial engineering methodology to manufacturing processes, it is possible to manage these constraints, eliminate the obstacles to achieving streamlined processes, and keep the cost of delivering products and services under control. Industrial engineering methodology has encouraged all stakeholders in manufacturing plants to become participants in dealing with constraints. It has empowered those on the shop floor as well as management to become partners in the change process. Using a manufacturing process model to organize patient procedures enables imaging department and imaging centers to generate reports that can help them understand utilization of labor, materials, equipment, and rooms. Administrators can determine the cost of individual procedures as well as the total and average cost of specific procedure types. When Toronto's Hospital for Sick Children first implemented industrial engineering methodology to medical imaging interventional radiology patient encounters, it focused on materials management. Early in the process, the return on investment became apparent as the department improved its management of more than 500,000 dollars of inventory. The calculated accumulated savings over 4 years for 10,000 interventional procedures alone amounted to more than 140,000 dollars. The medical imaging department in this hospital is only now beginning to apply what it has learned to other factors contributing to case cost. It has started to analyze its service contracts with equipment vendors. The department also is accumulating data to measure room, equipment, and labor utilization. The hospital now has a true picture of the real cost associated with each patient encounter in medical imaging. It can now begin to manage case costs, perform better capacity planning, create more effective relationships with its material suppliers, and optimize scheduling of patients and staff.

19 CFR 10.84 - Automotive vehicles and articles for use as original equipment in the manufacture of automotive...

Code of Federal Regulations, 2010 CFR

2010-04-01

... original equipment in the manufacture of automotive vehicles. 10.84 Section 10.84 Customs Duties U.S... vehicles and articles for use as original equipment in the manufacture of automotive vehicles. (a)(1... his declaration that the articles are being imported for use as original equipment in the manufacture...

Food processors requirements met by radiation processing

NASA Astrophysics Data System (ADS)

Durante, Raymond W.

2002-03-01

Processing food using irradiation provides significant advantages to food producers by destroying harmful pathogens and extending shelf life without any detectable physical or chemical changes. It is expected that through increased public education, food irradiation will emerge as a viable commercial industry. Food production in most countries involves state of the art manufacturing, packaging, labeling, and shipping techniques that provides maximum efficiency and profit. In the United States, food sales are extremely competitive and profit margins small. Most food producers have heavily invested in equipment and are hesitant to modify their equipment. Meat and poultry producers in particular utilize sophisticated production machinery that processes enormous volumes of product on a continuous basis. It is incumbent on the food irradiation equipment suppliers to develop equipment that can easily merge with existing processes without requiring major changes to either the final food product or the process utilized to produce that product. Before a food producer can include irradiation as part of their food production process, they must be certain the available equipment meets their needs. This paper will examine several major requirements of food processors that will most likely have to be provided by the supplier of the irradiation equipment.

Integrated manufacturing approach to attain benchmark team performance

NASA Astrophysics Data System (ADS)

Chen, Shau-Ron; Nguyen, Andrew; Naguib, Hussein

1994-09-01

A Self-Directed Work Team (SDWT) was developed to transfer a polyimide process module from the research laboratory to our wafer fab facility for applications in IC specialty devices. The SDWT implemented processes and tools based on the integration of five manufacturing strategies for continuous improvement. These were: Leadership Through Quality (LTQ), Total Productive Maintenance (TMP), Cycle Time Management (CTM), Activity-Based Costing (ABC), and Total Employee Involvement (TEI). Utilizing these management techniques simultaneously, the team achieved six sigma control of all critical parameters, increased Overall Equipment Effectiveness (OEE) from 20% to 90%, reduced cycle time by 95%, cut polyimide manufacturing cost by 70%, and improved its overall team member skill level by 33%.

Steam turbine/generator NDE workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nottingham, L.D.; Sabourin, P.F.

1990-11-01

On September 12--15, 1989, EPRI sponsored a workshop in Charlotte, North Carolina on steam turbine/generator rotating components. The approximate 185 attendees represented a broad spectrum of utilities, equipment manufactures, forging suppliers, service organizations, universities, insurance carriers, and consultants from the United States and abroad. Canada, England, Finland, France, Germany, Japan, Korea, Italy, Spain, and Sweden were represented at the workshop, and 81 of the attendees represented 44 domestic utilities. Nondestructive examination equipment demonstrations by 16 vendors and 2 utilities at the EPRI NDE Center complemented the technical presentation. In addition to 23 formal, technical presentations of prepared papers of specificmore » topics, 8 tutorial presentations, plus various opening and closing remarks and addresses, were given at the workshop. Presentations were organized under the following general topics: bucket blades and/or attachment regions; retaining rings; wheels/disks; steam turbine/generator testing and evaluation; and tutorials. Each individual paper has been cataloged separately.« less

Spinoff, 1987

NASA Technical Reports Server (NTRS)

Haggerty, James J.

1987-01-01

Various current or forthcoming NASA projects and experiments with potential for technology spinoff are described. NASA technological advances with existing commercial applications are outlined in the following areas: transportation; consumer; home; and recreation; medicine; resources management; energy; public safety; and manufacturing technology and industrial productivity. Specific systems, devices, and equipment are described. A concluding essay describes the NASA technology utilization/transfer effort.

Alaska birch for edge-glued panel production—considerations for wood products manufacturers

Treesearch

David Nicholls

2010-01-01

Edge-glued panels could become a natural extension for the birch (Betula papyrifera Marsh.) lumber industry in Alaska, resulting in greater utilization of the birch resource while allowing producers to explore a wider variety of products and markets. Key advantages of edge-glued panel production include the relatively low cost of equipment, the...

Transition Program for Equipment Manufacturers (TPEM)

EPA Pesticide Factsheets

In order to provide flexibility for small equipment manufacturers that must comply with new regulations, EPA created the Transition Program for Equipment Manufacturers, better known as “TPEM” or “flexibility program.”

5 CFR 532.267 - Special wage schedules for aircraft, electronic, and optical instrument overhaul and repair...

Code of Federal Regulations, 2011 CFR

2011-01-01

... Industry Classification System (NAICS) codes: 2007 NAICS codes 2007 NAICS industry titles 3341 Computer and peripheral equipment manufacturing. 33422 Radio and television broadcasting and wireless communications equipment manufacturing. 33429 Other communications equipment manufacturing. 3343 Audio and video equipment...

5 CFR 532.267 - Special wage schedules for aircraft, electronic, and optical instrument overhaul and repair...

Code of Federal Regulations, 2012 CFR

2012-01-01

... Industry Classification System (NAICS) codes: 2007 NAICS codes 2007 NAICS industry titles 3341 Computer and peripheral equipment manufacturing. 33422 Radio and television broadcasting and wireless communications equipment manufacturing. 33429 Other communications equipment manufacturing. 3343 Audio and video equipment...

5 CFR 532.267 - Special wage schedules for aircraft, electronic, and optical instrument overhaul and repair...

Code of Federal Regulations, 2013 CFR

2013-01-01

... Industry Classification System (NAICS) codes: 2007 NAICS codes 2007 NAICS industry titles 3341 Computer and peripheral equipment manufacturing. 33422 Radio and television broadcasting and wireless communications equipment manufacturing. 33429 Other communications equipment manufacturing. 3343 Audio and video equipment...

Decision-support tool for assessing biomanufacturing strategies under uncertainty: stainless steel versus disposable equipment for clinical trial material preparation.

PubMed

Farid, Suzanne S; Washbrook, John; Titchener-Hooker, Nigel J

2005-01-01

This paper presents the application of a decision-support tool, SIMBIOPHARMA, for assessing different manufacturing strategies under uncertainty for the production of biopharmaceuticals. SIMBIOPHARMA captures both the technical and business aspects of biopharmaceutical manufacture within a single tool that permits manufacturing alternatives to be evaluated in terms of cost, time, yield, project throughput, resource utilization, and risk. Its use for risk analysis is demonstrated through a hypothetical case study that uses the Monte Carlo simulation technique to imitate the randomness inherent in manufacturing subject to technical and market uncertainties. The case study addresses whether start-up companies should invest in a stainless steel pilot plant or use disposable equipment for the production of early phase clinical trial material. The effects of fluctuating product demands and titers on the performance of a biopharmaceutical company manufacturing clinical trial material are analyzed. The analysis highlights the impact of different manufacturing options on the range in possible outcomes for the project throughput and cost of goods and the likelihood that these metrics exceed a critical threshold. The simulation studies highlight the benefits of incorporating uncertainties when evaluating manufacturing strategies. Methods of presenting and analyzing information generated by the simulations are suggested. These are used to help determine the ranking of alternatives under different scenarios. The example illustrates the benefits to companies of using such a tool to improve management of their R&D portfolios so as to control the cost of goods.

Plasma Diagnostics: Use and Justification in an Industrial Environment

NASA Astrophysics Data System (ADS)

Loewenhardt, Peter

1998-10-01

The usefulness and importance of plasma diagnostics have played a major role in the development of plasma processing tools in the semiconductor industry. As can be seen through marketing materials from semiconductor equipment manufacturers, results from plasma diagnostic equipment can be a powerful tool in selling the technological leadership of tool design. Some diagnostics have long been used for simple process control such as optical emission for endpoint determination, but in recent years more sophisticated and involved diagnostic tools have been utilized in chamber and plasma source development and optimization. It is now common to find an assortment of tools at semiconductor equipment companies such as Langmuir probes, mass spectrometers, spatial optical emission probes, impedance, ion energy and ion flux probes. An outline of how the importance of plasma diagnostics has grown at an equipment manufacturer over the last decade will be given, with examples of significant and useful results obtained. Examples will include the development and optimization of an inductive plasma source, trends and hardware effects on ion energy distributions, mass spectrometry influences on process development and investigations of plasma-wall interactions. Plasma diagnostic focus, in-house development and proliferation in an environment where financial justification requirements are both strong and necessary will be discussed.

40 CFR 1039.625 - What requirements apply under the program for equipment-manufacturer flexibility?

Code of Federal Regulations, 2012 CFR

2012-07-01

... NONROAD COMPRESSION-IGNITION ENGINES Special Compliance Provisions § 1039.625 What requirements apply... manufacturers to produce equipment with engines that are subject to less stringent emission standards after the... such equipment without manufacturing it. Engines and equipment you produce under this section are...

40 CFR 1039.625 - What requirements apply under the program for equipment-manufacturer flexibility?

Code of Federal Regulations, 2013 CFR

2013-07-01

... NONROAD COMPRESSION-IGNITION ENGINES Special Compliance Provisions § 1039.625 What requirements apply... manufacturers to produce equipment with engines that are subject to less stringent emission standards after the... such equipment without manufacturing it. Engines and equipment you produce under this section are...

Agile manufacturing: The factory of the future

NASA Technical Reports Server (NTRS)

Loibl, Joseph M.; Bossieux, Terry A.

1994-01-01

The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

Advanced radiator concepts utilizing honeycomb panel heat pipes (stainless steel)

NASA Technical Reports Server (NTRS)

Fleischman, G. L.; Tanzer, H. J.

1985-01-01

The feasibility of fabricating and processing moderate temperature range heat pipes in a low mass honeycomb sandwich panel configuration for highly efficient radiator fins for the NASA space station was investigated. A variety of honeycomb panel facesheet and core-ribbon wick concepts were evaluated within constraints dictated by existing manufacturing technology and equipment. Concepts evaluated include: type of material, material and panel thicknesses, wick type and manufacturability, liquid and vapor communication among honeycomb cells, and liquid flow return from condenser to evaporator facesheet areas. In addition, the overall performance of the honeycomb panel heat pipe was evaluated analytically.

Estimating Power Outage Cost based on a Survey for Industrial Customers

NASA Astrophysics Data System (ADS)

Yoshida, Yoshikuni; Matsuhashi, Ryuji

A survey was conducted on power outage cost for industrial customers. 5139 factories, which are designated energy management factories in Japan, answered their power consumption and the loss of production value due to the power outage in an hour in summer weekday. The median of unit cost of power outage of whole sectors is estimated as 672 yen/kWh. The sector of services for amusement and hobbies and the sector of manufacture of information and communication electronics equipment relatively have higher unit cost of power outage. Direct damage cost from power outage in whole sectors reaches 77 billion yen. Then utilizing input-output analysis, we estimated indirect damage cost that is caused by the repercussion of production halt. Indirect damage cost in whole sectors reaches 91 billion yen. The sector of wholesale and retail trade has the largest direct damage cost. The sector of manufacture of transportation equipment has the largest indirect damage cost.

An Exploratory Study of OEE Implementation in Indian Manufacturing Companies

NASA Astrophysics Data System (ADS)

Kumar, J.; Soni, V. K.

2015-04-01

Globally, the implementation of Overall equipment effectiveness (OEE) has proven to be highly effective in improving availability, performance rate and quality rate while reducing unscheduled breakdown and wastage that stems from the equipment. This paper investigates the present status and future scope of OEE metrics in Indian manufacturing companies through an extensive survey. In this survey, opinions of Production and Maintenance Managers have been analyzed statistically to explore the relationship between factors, perspective of OEE and potential use of OEE metrics. Although the sample has been divers in terms of product, process type, size, and geographic location of the companies, they are enforced to implement improvement techniques such as OEE metrics to improve performance. The findings reveal that OEE metrics has huge potential and scope to improve performance. Responses indicate that Indian companies are aware of OEE but they are not utilizing full potential of OEE metrics.

Electrooptic polymer voltage sensor and method of manufacture thereof

NASA Technical Reports Server (NTRS)

Gottsche, Allan (Inventor); Perry, Joseph W. (Inventor)

1993-01-01

An optical voltage sensor utilizing an electrooptic polymer is disclosed for application to electric power distribution systems. The sensor, which can be manufactured at low cost in accordance with a disclosed method, measures voltages across a greater range than prior art sensors. The electrooptic polymer, which replaces the optical crystal used in prior art sensors, is sandwiched directly between two high voltage electrodes. Voltage is measured by fiber optical means, and no voltage division is required. The sample of electrooptic polymer is fabricated in a special mold and later mounted in a sensor housing. Alternatively, mold and sensor housing may be identical. The sensor housing is made out of a machinable polymeric material and is equipped with two opposing optical windows. The optical windows are mounted in the bottom of machined holes in the wall of the mold. These holes provide for mounting of the polarizing optical components and for mounting of the fiber optic connectors. One connecting fiber is equipped with a light emitting diode as a light source. Another connecting fiber is equipped with a photodiode as a detector.

48 CFR 1819.1005 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-10-01

... System (NAICS) codes are: NAICS code Industry category 334111 Electronic Computer Manufacturing. 334418... Manufacturing. 334119 Other Computer Peripheral Equipment Manufacturing. 33422 Radio and Television Broadcasting and Wireless Communication Equipment Manufacturing. 336415 Guided Missile and Space Vehicle Propulsion...

48 CFR 1819.1005 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-10-01

... System (NAICS) codes are: NAICS code Industry category 334111 Electronic Computer Manufacturing. 334418... Manufacturing. 334119 Other Computer Peripheral Equipment Manufacturing. 33422 Radio and Television Broadcasting and Wireless Communication Equipment Manufacturing. 336415 Guided Missile and Space Vehicle Propulsion...

48 CFR 1819.1005 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-10-01

... System (NAICS) codes are: NAICS code Industry category 334111 Electronic Computer Manufacturing. 334418... Manufacturing. 334119 Other Computer Peripheral Equipment Manufacturing. 33422 Radio and Television Broadcasting and Wireless Communication Equipment Manufacturing. 336415 Guided Missile and Space Vehicle Propulsion...

21 CFR 225.30 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CURRENT GOOD MANUFACTURING PRACTICE FOR MEDICATED FEEDS Construction and Maintenance of Facilities and Equipment § 225.30 Equipment. (a) Equipment which is designed to perform its intended function and is properly installed and used is essential to the manufacture of medicated feeds. Such equipment permits...

Lighting Equipment (Update to Listing)

DOT National Transportation Integrated Search

1996-05-06

This listing contains equipment and manufacturers certified or deleted since publication of advisory circular 150/5345-53A, Airport lighting equipment certification program, on 5-15-95. The equipment and manufacturers will be added to or deleted from...

21 CFR 600.11 - Physical establishment, equipment, animals, and care.

Code of Federal Regulations, 2010 CFR

2010-04-01

... in space used for the manufacture of products except that manufacturing space which is used only...-forming microorganism(s) from the manufacturing area for subsequent manufacture of other products. These... designed to mechanically isolate equipment or an area that involves manufacturing using live vaccine...

40 CFR 89.102 - Effective dates, optional inclusion, flexibility for equipment manufacturers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... COMPRESSION-IGNITION ENGINES Emission Standards and Certification Provisions § 89.102 Effective dates, optional inclusion, flexibility for equipment manufacturers. (a) This subpart applies to all engines... manufactured on or after January 1, 2000. (b) A manufacturer can optionally certify engines manufactured up to...

40 CFR 89.102 - Effective dates, optional inclusion, flexibility for equipment manufacturers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... COMPRESSION-IGNITION ENGINES Emission Standards and Certification Provisions § 89.102 Effective dates, optional inclusion, flexibility for equipment manufacturers. (a) This subpart applies to all engines... manufactured on or after January 1, 2000. (b) A manufacturer can optionally certify engines manufactured up to...

Value-added benefits of technology: e-procurement and e-commerce related to the health care industry.

PubMed

Smith, Alan D; Correa, Joseph

2005-01-01

To provide insights into the current supply chain for original equipment manufacturers (OEM) in the radiology diagnostic imaging equipment business. As is common in many manufacturing and service firms, the rationale of bridging suppliers of OEMs is the ability to leverage technology, software, and accessories pertaining to the various pieces of equipment. Several models of e-procurement and e-commerce related to the health care industry are presented. Although the radiology capital equipment market presents numerous idiosyncrasies that must be addressed to successfully implement an e-business strategy effectively, incredible opportunities exist all along the supply chain for e-business strategies to both eliminate costs and acquire strategic initiatives. Those firms that most successfully listen to their customers and address the barriers to efficiency (B2E) will help move the industry toward more effective utilization of the benefits e-business can create and also obtain first mover advantages. Although the efficiencies that e-business provides are extremely important in the radiology capital equipment market, the main value of e-business in this industry of high-priced and relatively infrequently purchased equipment may well be the value-added benefits the technology brings to its customers, as illustrated in the modeling process. The OEMs that eventually market their finished product directly to hospital and imaging centers via a direct sales force can best take advantage of the connectivity and accessibility of e-commerce.

40 CFR 1054.612 - What special provisions apply for equipment manufacturers modifying certified nonhandheld engines?

Code of Federal Regulations, 2011 CFR

2011-07-01

... manufacturer for that engine. In your application for certification describe any differences between the... equipment manufacturers modifying certified nonhandheld engines? 1054.612 Section 1054.612 Protection of..., SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT Special Compliance Provisions § 1054.612 What special...

40 CFR 1054.612 - What special provisions apply for equipment manufacturers modifying certified nonhandheld engines?

Code of Federal Regulations, 2013 CFR

2013-07-01

... manufacturer for that engine. In your application for certification describe any differences between the... equipment manufacturers modifying certified nonhandheld engines? 1054.612 Section 1054.612 Protection of..., SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT Special Compliance Provisions § 1054.612 What special...

40 CFR 1054.612 - What special provisions apply for equipment manufacturers modifying certified nonhandheld engines?

Code of Federal Regulations, 2012 CFR

2012-07-01

... manufacturer for that engine. In your application for certification describe any differences between the... equipment manufacturers modifying certified nonhandheld engines? 1054.612 Section 1054.612 Protection of..., SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT Special Compliance Provisions § 1054.612 What special...

40 CFR 1054.612 - What special provisions apply for equipment manufacturers modifying certified nonhandheld engines?

Code of Federal Regulations, 2014 CFR

2014-07-01

... manufacturer for that engine. In your application for certification describe any differences between the... equipment manufacturers modifying certified nonhandheld engines? 1054.612 Section 1054.612 Protection of..., SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT Special Compliance Provisions § 1054.612 What special...

40 CFR 1054.612 - What special provisions apply for equipment manufacturers modifying certified nonhandheld engines?

Code of Federal Regulations, 2010 CFR

2010-07-01

... manufacturer for that engine. In your application for certification describe any differences between the... equipment manufacturers modifying certified nonhandheld engines? 1054.612 Section 1054.612 Protection of..., SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT Special Compliance Provisions § 1054.612 What special...

29 CFR 1918.94 - Ventilation and atmospheric conditions (See also § 1918.2, definitions of Hazardous cargo...

Code of Federal Regulations, 2011 CFR

2011-07-01

... fumigant manufacturers' recommendations and warnings, and the proper use of personal protective equipment... other personal protective equipment recommended by the fumigant manufacturer for protection against the... and required to use any personal protective equipment recommended by the manufacturer of the product...

29 CFR 1918.94 - Ventilation and atmospheric conditions (See also § 1918.2, definitions of Hazardous cargo...

Code of Federal Regulations, 2010 CFR

2010-07-01

... fumigant manufacturers' recommendations and warnings, and the proper use of personal protective equipment... other personal protective equipment recommended by the fumigant manufacturer for protection against the... and required to use any personal protective equipment recommended by the manufacturer of the product...

A Perceptual Measure of the Degree of Development of Proprietary Equipment.

ERIC Educational Resources Information Center

Cua, Kristy O.; Junttila, Mikko A.; Schroeder, Roger G.

2002-01-01

Evaluated the psychometric properties of a perceptual measure of the extent to which manufacturing organizations develop proprietary equipment, the Proprietary Equipment Scale (developed by the World Class Manufacturing study). Analysis of data from 164 manufacturing plants in 5 countries indicates that although method effects are present, the…

Simulation Environment Synchronizing Real Equipment for Manufacturing Cell

NASA Astrophysics Data System (ADS)

Inukai, Toshihiro; Hibino, Hironori; Fukuda, Yoshiro

Recently, manufacturing industries face various problems such as shorter product life cycle, more diversified customer needs. In this situation, it is very important to reduce lead-time of manufacturing system constructions. At the manufacturing system implementation stage, it is important to make and evaluate facility control programs for a manufacturing cell, such as ladder programs for programmable logical controllers (PLCs) rapidly. However, before the manufacturing systems are implemented, methods to evaluate the facility control programs for the equipment while mixing and synchronizing real equipment and virtual factory models on the computers have not been developed. This difficulty is caused by the complexity of the manufacturing system composed of a great variety of equipment, and stopped precise and rapid support of a manufacturing engineering process. In this paper, a manufacturing engineering environment (MEE) to support manufacturing engineering processes using simulation technologies is proposed. MEE consists of a manufacturing cell simulation environment (MCSE) and a distributed simulation environment (DSE). MCSE, which consists of a manufacturing cell simulator and a soft-wiring system, is emphatically proposed in detail. MCSE realizes making and evaluating facility control programs by using virtual factory models on computers before manufacturing systems are implemented.

Advanced Manufacturing at the Marshall Space Flight Center and Application to Ares I and Ares V Launch Vehicles

NASA Technical Reports Server (NTRS)

Carruth, Ralph

2008-01-01

There are various aspects of advanced manufacturing technology development at the field centers of the National Aeronautics and Space Administration (NASA). The Marshall Space Flight Center (MSFC) has been given the assignment to lead the National Center for Advanced Manufacturing (NCAM) at MSFC and pursue advanced development and coordination with other federal agencies for NASA. There are significant activities at the Marshall Center as well as at the Michoud Assembly Facility (MAF) in New Orleans which we operate in conjunction with the University of New Orleans. New manufacturing processes in metals processing, component development, welding operations, composite manufacturing and thermal protection system material and process development will be utilized in the manufacturing of the United States two new launch vehicles, the Ares I and the Ares V. An overview of NCAM will be presented as well as some of the development activities and manufacturing that are ongoing in Ares Upper Stage development. Some of the tools and equipment produced by Italian owned companies and their application in this work will be mentioned.

UOE Pipe Manufacturing Process Simulation: Equipment Designing and Construction

NASA Astrophysics Data System (ADS)

Delistoian, Dmitri; Chirchor, Mihael

2017-12-01

UOE pipe manufacturing process influence directly on pipeline resilience and operation capacity. At present most spreaded pipe manufacturing method is UOE. This method is based on cold forming. After each technological step appears a certain stress and strain level. For pipe stress strain study is designed and constructed special equipment that simulate entire technological process.UOE pipe equipment is dedicated for manufacturing of longitudinally submerged arc welded DN 400 (16 inch) steel pipe.

Overview of the production of sintered SiC optics and optical sub-assemblies

NASA Astrophysics Data System (ADS)

Williams, S.; Deny, P.

2005-08-01

The following is an overview on sintered silicon carbide (SSiC) material properties and processing requirements for the manufacturing of components for advanced technology optical systems. The overview will compare SSiC material properties to typical materials used for optics and optical structures. In addition, it will review manufacturing processes required to produce optical components in detail by process step. The process overview will illustrate current manufacturing process and concepts to expand the process size capability. The overview will include information on the substantial capital equipment employed in the manufacturing of SSIC. This paper will also review common in-process inspection methodology and design rules. The design rules are used to improve production yield, minimize cost, and maximize the inherent benefits of SSiC for optical systems. Optimizing optical system designs for a SSiC manufacturing process will allow systems designers to utilize SSiC as a low risk, cost competitive, and fast cycle time technology for next generation optical systems.

Zinc-oxygen battery development program

NASA Technical Reports Server (NTRS)

Bourland, Deborah S.

1991-01-01

The purpose of this Zinc-Oxygen development program is to incorporate the improved air/oxygen cathode and zinc anode technology developed in recent years into relatively large cells (150-200 amp/hr, 25-100 hour rate) and smaller high rate cells (9-12 amp/hr, 3-12 hour rate). Existing commercial cells manufactured by Duracell and Rayovac are currently being utilized on the Space Shuttle Orbiter in a mini-oscilloscope, the crew radio, and other crew equipment. These applications provide a basis for other Orbiter systems that require portable, storable, electrical power as well as emergency power for the Space Station major payload systems power and for Space Station equipment applications.

21 CFR 226.30 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CURRENT GOOD MANUFACTURING PRACTICE FOR TYPE A MEDICATED ARTICLES Construction and Maintenance of Facilities and Equipment § 226.30 Equipment. Equipment used for the manufacture, processing, packaging, bulk... maintained in a clean and orderly manner and shall be of suitable design, size, construction, and location to...

75 FR 7556 - Energy Efficiency Standards for Manufactured Housing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-22

... financial considerations and life cycle costs. (4) Statistics associated with HVAC system and equipment type... standards. Provide a system for enforcement in which ``[a]ny manufacturer of manufactured housing that... available for products, systems, equipment, and materials used in the construction of manufactured homes...

Intelligent Processing Equipment Developments Within the Navy's Manufacturing Technology Centers of Excellence

NASA Technical Reports Server (NTRS)

Nanzetta, Philip

1992-01-01

The U.S. Navy has had an active Manufacturing Technology (MANTECH) Program aimed at developing advanced production processes and equipment since the late-1960's. During the past decade, however, the resources of the MANTECH program were concentrated in Centers of Excellence. Today, the Navy sponsors four manufacturing technology Centers of Excellence: the Automated Manufacturing Research Facility (AMRF); the Electronics Manufacturing Productivity Facility (EMPF); the National Center for Excellence in Metalworking Technology (NCEMT); and the Center of Excellence for Composites Manufacturing Technology (CECMT). This paper briefly describes each of the centers and summarizes typical Intelligent Equipment Processing (IEP) projects that were undertaken.

78 FR 58153 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-23

... engine and engine parts manufacturing,'' ``Motor vehicle electrical and electronic equipment... manufacturing,'' ``Other motor vehicle electrical and electronic equipment manufacturing,'' and ``All other motor vehicle parts manufacturing'' in the second column from the list of required NAICS codes for the...

Definitional-mission report: Combined-cycle power plant, Sultan Iskandar Power Station Phase 2-B, Tenaga Nasional BHD, Malaysia. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kadagathur, G.

1990-12-10

Tenaga Nasional BHD (TEN) formerly known as National Electricity Board of Malaysia is proposing to construct a Combined Cycle Power Plant at Pasir Gudang. The project is known as Sultan Iskandar Power Station Phase 2 (SIPS-2). U.S. engineering companies and U.S. equipment manufacturers are having difficulty in procuring contracts from the Malaysian Power Industry. To date, the industry is dominated by consortia with British and Swiss participation. Several U.S. engineering companies have approached the US Trade and Development Program (TDP) to assist them in breaking into the Malaysian utility market by supporting their effort on their current proposals for SIPS-2more » project. It is recommended that TDP should approve a grant to TEN that would provide funds for engineering upto the preparation of equipment specifications and associated technology transfer. The grant along with the weak dollar should be attractive enough for TEN to strongly consider consortia with U.S. companies very favorably. The project also offers a potential for the export of U.S. manufactured equipment in the range of $170 million.« less

Setting new standards in MEMS

NASA Astrophysics Data System (ADS)

Rimskog, Magnus; O'Loughlin, Brian J.

2007-02-01

Silex Microsystems handles a wide range of customized MEMS components. This speech will be describing Silex's MEMS foundry work model for providing customized solutions based on MEMS in a cost effective and well controlled manner. Factors for success are the capabilities to reformulate a customer product concept to manufacturing processes in the wafer fab, using standard process modules and production equipment. A well-controlled system increases the likelihood of a first batch success and enables fast ramp-up into volume production. The following success factors can be listed: strong enduring relationships with the customers; highly qualified well-experienced specialists working close with the customer; process solutions and building blocks ready to use out of a library; addressing manufacturing issues in the early design phase; in-house know how to meet demands for volume manufacturing; access to a wafer fab with high capacity, good organization, high availability of equipment, and short lead times; process development done in the manufacturing environment using production equipment for easy ramp-up to volume production. The article covers a method of working to address these factors: to have a long and enduring relationships with customers utilizing MEMS expertise and working close with customers, to translate their product ideas to MEMS components; to have stable process solutions for features such as Low ohmic vias, Spiked electrodes, Cantilevers, Silicon optical mirrors, Micro needles, etc, which can be used and modified for the customer needs; to use a structured development and design methodology in order to handle hundreds of process modules, and setting up standard run sheets. It is also very important to do real time process development in the manufacturing line. It minimizes the lead-time for the ramp-up of production; to have access to a state of the art Wafer Fab which is well organized, controlled and flexible, with high capacity and short lead-time for prototypes. It is crucial to have intimate control of processes, equipment, organization, production flow control and WIP. This has been addressed by using a fully computerized control and reporting system.

Manufacturing a Superconductor in School.

ERIC Educational Resources Information Center

Barrow, John

1989-01-01

Described is the manufacture of a superconductor from a commercially available kit using equipment usually available in schools or easily obtainable. The construction is described in detail including equipment, materials, safety procedures, tolerances, and manufacture. (Author/CW)

Influence of Different Container Closure Systems and Capping Process Parameters on Product Quality and Container Closure Integrity (CCI) in GMP Drug Product Manufacturing.

PubMed

Mathaes, Roman; Mahler, Hanns-Christian; Roggo, Yves; Huwyler, Joerg; Eder, Juergen; Fritsch, Kamila; Posset, Tobias; Mohl, Silke; Streubel, Alexander

2016-01-01

Capping equipment used in good manufacturing practice manufacturing features different designs and a variety of adjustable process parameters. The overall capping result is a complex interplay of the different capping process parameters and is insufficiently described in literature. It remains poorly studied how the different capping equipment designs and capping equipment process parameters (e.g., pre-compression force, capping plate height, turntable rotating speed) contribute to the final residual seal force of a sealed container closure system and its relation to container closure integrity and other drug product quality parameters. Stopper compression measured by computer tomography correlated to residual seal force measurements.In our studies, we used different container closure system configurations from different good manufacturing practice drug product fill & finish facilities to investigate the influence of differences in primary packaging, that is, vial size and rubber stopper design on the capping process and the capped drug product. In addition, we compared two large-scale good manufacturing practice manufacturing capping equipment and different capping equipment settings and their impact on product quality and integrity, as determined by residual seal force.The capping plate to plunger distance had a major influence on the obtained residual seal force values of a sealed vial, whereas the capping pre-compression force and the turntable rotation speed showed only a minor influence on the residual seal force of a sealed vial. Capping process parameters could not easily be transferred from capping equipment of different manufacturers. However, the residual seal force tester did provide a valuable tool to compare capping performance of different capping equipment. No vial showed any leakage greater than 10(-8)mbar L/s as measured by a helium mass spectrometry system, suggesting that container closure integrity was warranted in the residual seal force range tested for the tested container closure systems. Capping equipment used in good manufacturing practice manufacturing features different designs and a variety of adjustable process parameters. The overall capping result is a complex interplay of the different capping process parameters and is insufficiently described in the literature. It remains poorly studied how the different capping equipment designs and capping equipment process parameters contribute to the final capping result.In this study, we used different container closure system configurations from different good manufacturing process drug product fill & finish facilities to investigate the influence of the vial size and the rubber stopper design on the capping process. In addition, we compared two examples of large-scale good manufacturing process capping equipment and different capping equipment settings and their impact on product quality and integrity, as determined by residual seal force. © PDA, Inc. 2016.

Equipment Manufacturers, Importers, and Exporters: Frequent Questions

EPA Pesticide Factsheets

As the US continues to phase out HCFCs, equipment manufacturers, importers, and exporters will need to adapt to the changing market demand for equipment. This page provides these groups with information on their responsibilities under the regulations.

Automated solar cell assembly team process research

NASA Astrophysics Data System (ADS)

Nowlan, M. J.; Hogan, S. J.; Darkazalli, G.; Breen, W. F.; Murach, J. M.; Sutherland, S. F.; Patterson, J. S.

1994-06-01

This report describes work done under the Photovoltaic Manufacturing Technology (PVMaT) project, Phase 3A, which addresses problems that are generic to the photovoltaic (PV) industry. Spire's objective during Phase 3A was to use its light soldering technology and experience to design and fabricate solar cell tabbing and interconnecting equipment to develop new, high-yield, high-throughput, fully automated processes for tabbing and interconnecting thin cells. Areas that were addressed include processing rates, process control, yield, throughput, material utilization efficiency, and increased use of automation. Spire teamed with Solec International, a PV module manufacturer, and the University of Massachusetts at Lowell's Center for Productivity Enhancement (CPE), automation specialists, who are lower-tier subcontractors. A number of other PV manufacturers, including Siemens Solar, Mobil Solar, Solar Web, and Texas instruments, agreed to evaluate the processes developed under this program.

40 CFR 60.4242 - What other requirements must I meet if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2012 CFR

2012-07-01

... I am a manufacturer of stationary SI internal combustion engines or equipment containing stationary SI internal combustion engines or a manufacturer of equipment containing such engines? 60.4242... Ignition Internal Combustion Engines Compliance Requirements for Manufacturers § 60.4242 What other...

40 CFR 60.4242 - What other requirements must I meet if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2010 CFR

2010-07-01

... I am a manufacturer of stationary SI internal combustion engines or equipment containing stationary SI internal combustion engines or a manufacturer of equipment containing such engines? 60.4242... Ignition Internal Combustion Engines Compliance Requirements for Manufacturers § 60.4242 What other...

40 CFR 60.4242 - What other requirements must I meet if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2013 CFR

2013-07-01

... I am a manufacturer of stationary SI internal combustion engines or equipment containing stationary SI internal combustion engines or a manufacturer of equipment containing such engines? 60.4242... Ignition Internal Combustion Engines Compliance Requirements for Manufacturers § 60.4242 What other...

40 CFR 60.4242 - What other requirements must I meet if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2014 CFR

2014-07-01

... I am a manufacturer of stationary SI internal combustion engines or equipment containing stationary SI internal combustion engines or a manufacturer of equipment containing such engines? 60.4242... Ignition Internal Combustion Engines Compliance Requirements for Manufacturers § 60.4242 What other...

40 CFR 60.4242 - What other requirements must I meet if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2011 CFR

2011-07-01

... I am a manufacturer of stationary SI internal combustion engines or equipment containing stationary SI internal combustion engines or a manufacturer of equipment containing such engines? 60.4242... Ignition Internal Combustion Engines Compliance Requirements for Manufacturers § 60.4242 What other...

Tactical Utility of Tailored Systems

DTIC Science & Technology

2015-07-10

create a procurement system to produce materiel at a cost low enough to make equipment disposable. Further cost savings may be realized by upgrading...replacement parts. With the advent of 3-d printing and digital manufacturing, a new part may be procured as easily as scanning a bar code and pressing...9/11 Commission Report “Imagination is not a gift usually associated with bureaucracies. It is therefore crucial to find a way of routinizing, even

40 CFR 1039.626 - What special provisions apply to equipment imported under the equipment-manufacturer flexibility...

Code of Federal Regulations, 2010 CFR

2010-07-01

... EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Special Compliance Provisions § 1039.626... and manufacturing equipment. Companies that import equipment into the United States without meeting... and copying of any documents related to demonstrating compliance with the exemptions in § 1039.625...

49 CFR 566.5 - Requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (c) Description of each type of motor vehicle or of covered equipment manufactured by the manufacturer, including, for motor vehicles, the approximate ranges of gross vehicle weight ratings for each... vehicles, and each manufacturer of covered equipment, shall furnish the information specified in paragraphs...

VIEW OF PRECISION EQUIPMENT USED IN STAINLESS COMPONENT MANUFACTURING. THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF PRECISION EQUIPMENT USED IN STAINLESS COMPONENT MANUFACTURING. THE FACILITY WAS DESCRIBED AS THE MOST MODERN NON-NUCLEAR MANUFACTURING BUILDING IN THE U.S. DEPARTMENT OF ENERGY COMPLEX, WITH MANY PRECISION INSTRUMENTS. (9/21/83) - Rocky Flats Plant, Stainless Steel & Non-Nuclear Components Manufacturing, Southeast corner of intersection of Cottonwood & Third Avenues, Golden, Jefferson County, CO

Product-line selection and pricing with remanufacturing under availability constraints

NASA Astrophysics Data System (ADS)

Aras, Necati; Esenduran, G.÷k.‡e.; Altinel, I. Kuban

2004-12-01

Product line selection and pricing are two crucial decisions for the profitability of a manufacturing firm. Remanufacturing, on the other hand, may be a profitable strategy that captures the remaining value in used products. In this paper we develop a mixed-integer nonlinear programming model form the perspective of an original equipment manufacturer (OEM). The objective of the OEM is to select products to manufacture and remanufacture among a set of given alternatives and simultaneously determine their prices so as to maximize its profit. It is assumed that the probability a customer selects a product is proportional to its utility and inversely proportional to its price. The utility of a product is an increasing function of its perceived quality. In our base model, products are discriminated by their unit production costs and utilities. We also analyze a case where remanufacturing is limited by the available quantity of collected remanufacturable products. We show that the resulting problem is decomposed into the pricing and product line selection subproblems. Pricing problem is solved by a variant of the simplex search procedure which can also handle constraints, while complete enumeration and a genetic algorithm are used for the solution of the product line selection problem. A number of experiments are carried out to identify conditions under which it is economically viable for the firm to sell remanufactured products. We also determine the optimal utility and unit production cost values of a remanufactured product, which maximizes the total profit of the OEM.

A Bootstrap Approach to Martian Manufacturing

NASA Technical Reports Server (NTRS)

Dorais, Gregory A.

2004-01-01

In-Situ Resource Utilization (ISRU) is an essential element of any affordable strategy for a sustained human presence on Mars. Ideally, Martian habitats would be extremely massive to allow plenty of room to comfortably live and work, as well as to protect the occupants from the environment. Moreover, transportation and power generation systems would also require significant mass if affordable. For our approach to ISRU, we use the industrialization of the U.S. as a metaphor. The 19th century started with small blacksmith shops and ended with massive steel mills primarily accomplished by blacksmiths increasing their production capacity and product size to create larger shops, which produced small mills, which produced the large steel mills that industrialized the country. Most of the mass of a steel mill is comprised of steel in simple shapes, which are produced and repaired with few pieces of equipment also mostly made of steel in basic shapes. Due to this simplicity, we expect that the 19th century manufacturing growth can be repeated on Mars in the 21st century using robots as the primary labor force. We suggest a "bootstrap" approach to manufacturing on Mars that uses a "seed" manufacturing system that uses regolith to create major structural components and spare parts. The regolith would be melted, foamed, and sintered as needed to fabricate parts using casting and solid freeform fabrication techniques. Complex components, such as electronics, would be brought from Earth and integrated as needed. These parts would be assembled to create additional manufacturing systems, which can be both more capable and higher capacity. These subsequent manufacturing systems could refine vast amounts of raw materials to create large components, as well as assemble equipment, habitats, pressure vessels, cranes, pipelines, railways, trains, power generation stations, and other facilities needed to economically maintain a sustained human presence on Mars.

78 FR 69927 - Notice to Manufacturers of Continuous Friction Measurement Equipment (CFME)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-21

... Friction Measurement Equipment (CFME) AGENCY: Federal Aviation Administration (FAA), US DOT. ACTION: Notice... (FAA) is considering issuing waivers to foreign manufacturers of Continuous Friction Measurement... entitled, Continuous Friction Measurement Equipment Request for Qualifications. The FAA wants to determine...

World wide matching of registration metrology tools of various generations

NASA Astrophysics Data System (ADS)

Laske, F.; Pudnos, A.; Mackey, L.; Tran, P.; Higuchi, M.; Enkrich, C.; Roeth, K.-D.; Schmidt, K.-H.; Adam, D.; Bender, J.

2008-10-01

Turn around time/cycle time is a key success criterion in the semiconductor photomask business. Therefore, global mask suppliers typically allocate work loads based on fab capability and utilization capacity. From a logistical point of view, the manufacturing location of a photomask should be transparent to the customer (mask user). Matching capability of production equipment and especially metrology tools is considered a key enabler to guarantee cross site manufacturing flexibility. Toppan, with manufacturing sites in eight countries worldwide, has an on-going program to match the registration metrology systems of all its production sites. This allows for manufacturing flexibility and risk mitigation.In cooperation with Vistec Semiconductor Systems, Toppan has recently completed a program to match the Vistec LMS IPRO systems at all production sites worldwide. Vistec has developed a new software feature which allows for significantly improved matching of LMS IPRO(x) registration metrology tools of various generations. We will report on the results of the global matching campaign of several of the leading Toppan sites.

Manufacturing information system

NASA Astrophysics Data System (ADS)

Allen, D. K.; Smith, P. R.; Smart, M. J.

1983-12-01

The size and cost of manufacturing equipment has made it extremely difficult to perform realistic modeling and simulation of the manufacturing process in university research laboratories. Likewise the size and cost factors, coupled with many uncontrolled variables of the production situation has even made it difficult to perform adequate manufacturing research in the industrial setting. Only the largest companies can afford manufacturing research laboratories; research results are often held proprietary and seldom find their way into the university classroom to aid in education and training of new manufacturing engineers. It is the purpose for this research to continue the development of miniature prototype equipment suitable for use in an integrated CAD/CAM Laboratory. The equipment being developed is capable of actually performing production operations (e.g. drilling, milling, turning, punching, etc.) on metallic and non-metallic workpieces. The integrated CAD/CAM Mini-Lab is integrating high resolution, computer graphics, parametric design, parametric N/C parts programmings, CNC machine control, automated storage and retrieval, with robotics materials handling. The availability of miniature CAD/CAM laboratory equipment will provide the basis for intensive laboratory research on manufacturing information systems.

Analysis and evalaution in the production process and equipment area of the low-cost solar array project. [including modifying gaseous diffusion and using ion implantation

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1979-01-01

The manufacturing methods for photovoltaic solar energy utilization are assessed. Economic and technical data on the current front junction formation processes of gaseous diffusion and ion implantation are presented. Future proposals, including modifying gaseous diffusion and using ion implantation, to decrease the cost of junction formation are studied. Technology developments in current processes and an economic evaluation of the processes are included.

Automotive Manufacturing Processes. Volume V - Manufacturing Processes and Equipment for the Mass Production and Assembly of Motor Vehicles

DOT National Transportation Integrated Search

1981-02-01

Extensive material substitution and resizing of the domestic automotive fleet, as well as the introduction of new technologies, will require major changes in the techniques and equipment used in the various manufacturing processes employed in the pro...

40 CFR 63.2132 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2011 CFR

2011-07-01

... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Manufacturing of Nutritional Yeast What... nutritional yeast manufacturing facility. (b) The affected source is the collection of equipment used in the manufacture of the nutritional yeast species Saccharomyces cerevisiae. This collection of equipment includes...

49 CFR 557.3 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... interested person may file with the Administrator a petition requesting him to hold a hearing on— (a) Whether... safety-related defect in any motor vehicle or item of replacement equipment manufactured by him; (b... replacement equipment manufactured by him; (c) Whether the manufacturer has reasonably met his obligation to...

Advanced excimer laser technologies enable green semiconductor manufacturing

NASA Astrophysics Data System (ADS)

Fukuda, Hitomi; Yoo, Youngsun; Minegishi, Yuji; Hisanaga, Naoto; Enami, Tatsuo

2014-03-01

"Green" has fast become an important and pervasive topic throughout many industries worldwide. Many companies, especially in the manufacturing industries, have taken steps to integrate green initiatives into their high-level corporate strategies. Governments have also been active in implementing various initiatives designed to increase corporate responsibility and accountability towards environmental issues. In the semiconductor manufacturing industry, there are growing concerns over future environmental impact as enormous fabs expand and new generation of equipments become larger and more powerful. To address these concerns, Gigaphoton has implemented various green initiatives for many years under the EcoPhoton™ program. The objective of this program is to drive innovations in technology and services that enable manufacturers to significantly reduce both the financial and environmental "green cost" of laser operations in high-volume manufacturing environment (HVM) - primarily focusing on electricity, gas and heat management costs. One example of such innovation is Gigaphoton's Injection-Lock system, which reduces electricity and gas utilization costs of the laser by up to 50%. Furthermore, to support the industry's transition from 300mm to the next generation 450mm wafers, technologies are being developed to create lasers that offer double the output power from 60W to 120W, but reducing electricity and gas consumption by another 50%. This means that the efficiency of lasers can be improve by up to 4 times in 450mm wafer production environments. Other future innovations include the introduction of totally Heliumfree Excimer lasers that utilize Nitrogen gas as its replacement for optical module purging. This paper discusses these and other innovations by Gigaphoton to enable green manufacturing.

47 CFR 80.225 - Requirements for selective calling equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... manufacture, importation, sale or installation of non-portable DSC equipment that does not comply with either..., 2011. (5) The manufacture, importation, or sale of handheld, portable DSC equipment that does not... to establish or maintain communications provided that: (i) These signalling techniques are not used...

A Magnetic Bead-Integrated Chip for the Large Scale Manufacture of Normalized esiRNAs

PubMed Central

Wang, Zhao; Huang, Huang; Zhang, Hanshuo; Sun, Changhong; Hao, Yang; Yang, Junyu; Fan, Yu; Xi, Jianzhong Jeff

2012-01-01

The chemically-synthesized siRNA duplex has become a powerful and widely used tool for RNAi loss-of-function studies, but suffers from a high off-target effect problem. Recently, endoribonulease-prepared siRNA (esiRNA) has been shown to be an attractive alternative due to its lower off-target effect and cost effectiveness. However, the current manufacturing method for esiRNA is complicated, mainly in regards to purification and normalization on a large-scale level. In this study, we present a magnetic bead-integrated chip that can immobilize amplification or transcription products on beads and accomplish transcription, digestion, normalization and purification in a robust and convenient manner. This chip is equipped to manufacture ready-to-use esiRNAs on a large-scale level. Silencing specificity and efficiency of these esiRNAs were validated at the transcriptional, translational and functional levels. Manufacture of several normalized esiRNAs in a single well, including those silencing PARP1 and BRCA1, was successfully achieved, and the esiRNAs were subsequently utilized to effectively investigate their synergistic effect on cell viability. A small esiRNA library targeting 68 tyrosine kinase genes was constructed for a loss-of-function study, and four genes were identified in regulating the migration capability of Hela cells. We believe that this approach provides a more robust and cost-effective choice for manufacturing esiRNAs than current approaches, and therefore these heterogeneous RNA strands may have utility in most intensive and extensive applications. PMID:22761791

Facilities | Advanced Manufacturing Research | NREL

Science.gov Websites

, and black building with two people walking in front of it. Energy Systems Integration Facility Its projects. Photo of a large, warehouse-like, lab space with several people in hard hats operating equipment with a few people and manufacturing equipment, including spools and web lines. Manufacturing Laboratory

Design and validation of a tissue bath 3-D printed with PLA for optically mapping suspended whole heart preparations.

PubMed

Entz, Michael; King, D Ryan; Poelzing, Steven

2017-12-01

With the sudden increase in affordable manufacturing technologies, the relationship between experimentalists and the designing process for laboratory equipment is rapidly changing. While experimentalists are still dependent on engineers and manufacturers for precision electrical, mechanical, and optical equipment, it has become a realistic option for in house manufacturing of other laboratory equipment with less precise design requirements. This is possible due to decreasing costs and increasing functionality of desktop three-dimensional (3-D) printers and 3-D design software. With traditional manufacturing methods, iterative design processes are expensive and time consuming, and making more than one copy of a custom piece of equipment is prohibitive. Here, we provide an overview to design a tissue bath and stabilizer for a customizable, suspended, whole heart optical mapping apparatus that can be produced significantly faster and less expensive than conventional manufacturing techniques. This was accomplished through a series of design steps to prevent fluid leakage in the areas where the optical imaging glass was attached to the 3-D printed bath. A combination of an acetone dip along with adhesive was found to create a water tight bath. Optical mapping was used to quantify cardiac conduction velocity and action potential duration to compare 3-D printed baths to a bath that was designed and manufactured in a machine shop. Importantly, the manufacturing method did not significantly affect conduction, action potential duration, or contraction, suggesting that 3-D printed baths are equally effective for optical mapping experiments. NEW & NOTEWORTHY This article details three-dimensional printable equipment for use in suspended whole heart optical mapping experiments. This equipment is less expensive than conventional manufactured equipment as well as easily customizable to the experimentalist. The baths can be waterproofed using only a three-dimensional printer, acetone, a glass microscope slide, c-clamps, and adhesive. Copyright © 2017 the American Physiological Society.

Fabrication of Three-dimensional Paper-based Microfluidic Devices for Immunoassays.

PubMed

Fernandes, Syrena C; Wilson, Daniel J; Mace, Charles R

2017-03-09

Paper wicks fluids autonomously due to capillary action. By patterning paper with hydrophobic barriers, the transport of fluids can be controlled and directed within a layer of paper. Moreover, stacking multiple layers of patterned paper creates sophisticated three-dimensional microfluidic networks that can support the development of analytical and bioanalytical assays. Paper-based microfluidic devices are inexpensive, portable, easy to use, and require no external equipment to operate. As a result, they hold great promise as a platform for point-of-care diagnostics. In order to properly evaluate the utility and analytical performance of paper-based devices, suitable methods must be developed to ensure their manufacture is reproducible and at a scale that is appropriate for laboratory settings. In this manuscript, a method to fabricate a general device architecture that can be used for paper-based immunoassays is described. We use a form of additive manufacturing (multi-layer lamination) to prepare devices that comprise multiple layers of patterned paper and patterned adhesive. In addition to demonstrating the proper use of these three-dimensional paper-based microfluidic devices with an immunoassay for human chorionic gonadotropin (hCG), errors in the manufacturing process that may result in device failures are discussed. We expect this approach to manufacturing paper-based devices will find broad utility in the development of analytical applications designed specifically for limited-resource settings.

Advanced lighting guidelines: 1993. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eley, C.; Tolen, T.M.; Benya, J.R.

1993-12-31

The 1993 Advanced Lighting Guidelines document consists of twelve guidelines that provide an overview of specific lighting technologies and design application techniques utilizing energy-efficient lighting practice. Lighting Design Practice assesses energy-efficient lighting strategies, discusses lighting issues, and explains how to obtain quality lighting design and consulting services. Luminaires and Lighting Systems surveys luminaire equipment designed to take advantage of advanced technology lamp products and includes performance tables that allow for accurate estimation of luminaire light output and power input. The additional ten guidelines -- Computer-Aided Lighting Design, Energy-Efficient Fluorescent Ballasts, Full-Size Fluorescent Lamps, Compact Fluorescent Lamps, Tungsten-Halogen Lamps, Metal Halidemore » and HPS Lamps, Daylighting and Lumen Maintenance, Occupant Sensors, Time Scheduling Systems, and Retrofit Control Technologies -- each provide a product technology overview, discuss current products on the lighting equipment market, and provide application techniques. This document is intended for use by electric utility personnel involved in lighting programs, lighting designers, electrical engineers, architects, lighting manufacturers` representatives, and other lighting professionals.« less

Extraterrestrial processing and manufacturing of large space systems. Volume 3: Executive summary

NASA Technical Reports Server (NTRS)

Miller, R. H.; Smith, D. B. S.

1979-01-01

Facilities and equipment are defined for refining processes to commercial grade of lunar material that is delivered to a 'space manufacturing facility' in beneficiated, primary processed quality. The manufacturing facilities and the equipment for producing elements of large space systems from these materials and providing programmatic assessments of the concepts are also defined. In-space production processes of solar cells (by vapor deposition) and arrays, structures and joints, conduits, waveguides, RF equipment radiators, wire cables, converters, and others are described.

49 CFR 393.11 - Lamps and reflective devices.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., meet the applicable requirements of 49 CFR 571.108 (FMVSS No. 108) in effect at the time of manufacture..., meet the requirements of subpart B of part 393 in effect at the time of manufacture. (2) Exceptions... devices and electrical equipment in effect at the time of manufacture. Trailers which are equipped with...

Inspection qualification (IQ) and operational qualification (OQ) for a vacuum freeze-dryer--Part II: Inspection qualification.

PubMed

Jennings, T A; Scheer, A; Emodi, A; Puderbach, L; King, S; Norton, T

1996-01-01

This paper demonstrates the importance of the inspection qualification (IQ). It was shown that the facilities were adequate to house the dryer and its associated instrumentation, and that the facilities had sufficient utilities to operate the dryer. The IQ established that the design and construction of the dryer was in agreement with the proposed hardware and design specifications. It was verified that the dryer was constructed in accordance with specifications set-forth by the equipment manufacturer.

Boring in the Big City - part 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giuliani, A.J.

This paper describes technologies being utilized or tested by Brooklyn Union for gas main installation. Trenchless technologies described include pipe splitting, key holes to minimize excavations, and boring. Areas in lining system technology which require further development by vendors and manufacturers of trenchless equipment are also addressed. Specific needs identified include: (1) improving instrumentation for locating and controlling underground boring; (2) repairing soft and hard lining systems; and (3) developing a window cutter to safely remove the old carrier pipes without damaging the newly fitted internal plastic pipes.

22 CFR 126.8 - Proposals to foreign persons relating to significant military equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... or manufacture abroad of significant military equipment require either the prior approval of, or... may make a proposal or presentation designed to constitute a basis for a decision on the part of any... under the FMS Program to any foreign country. (3) Manufacture abroad of significant military equipment...

Automated Rapid Prototyping of 3D Ceramic Parts

NASA Technical Reports Server (NTRS)

McMillin, Scott G.; Griffin, Eugene A.; Griffin, Curtis W.; Coles, Peter W. H.; Engle, James D.

2005-01-01

An automated system of manufacturing equipment produces three-dimensional (3D) ceramic parts specified by computational models of the parts. The system implements an advanced, automated version of a generic rapid-prototyping process in which the fabrication of an object having a possibly complex 3D shape includes stacking of thin sheets, the outlines of which closely approximate the horizontal cross sections of the object at their respective heights. In this process, the thin sheets are made of a ceramic precursor material, and the stack is subsequently heated to transform it into a unitary ceramic object. In addition to the computer used to generate the computational model of the part to be fabricated, the equipment used in this process includes: 1) A commercially available laminated-object-manufacturing machine that was originally designed for building woodlike 3D objects from paper and was modified to accept sheets of ceramic precursor material, and 2) A machine designed specifically to feed single sheets of ceramic precursor material to the laminated-object-manufacturing machine. Like other rapid-prototyping processes that utilize stacking of thin sheets, this process begins with generation of the computational model of the part to be fabricated, followed by computational sectioning of the part into layers of predetermined thickness that collectively define the shape of the part. Information about each layer is transmitted to rapid-prototyping equipment, where the part is built layer by layer. What distinguishes this process from other rapid-prototyping processes that utilize stacking of thin sheets are the details of the machines and the actions that they perform. In this process, flexible sheets of ceramic precursor material (called "green" ceramic sheets) suitable for lamination are produced by tape casting. The binder used in the tape casting is specially formulated to enable lamination of layers with little or no applied heat or pressure. The tape is cut into individual sheets, which are stacked in the sheet-feeding machine until used. The sheet-feeding machine can hold enough sheets for about 8 hours of continuous operation.

40 CFR 1054.635 - What special provisions apply for small-volume engine and equipment manufacturers?

Code of Federal Regulations, 2011 CFR

2011-07-01

... special provisions in this part for small-volume engine and equipment manufacturers. (a) If you qualify... qualify under paragraph (1) or (2) of the definition of small-volume engine manufacturer or under...) Additional lead time and other provisions related to the transition to new emission standards. See § 1054.145...

40 CFR 1054.635 - What special provisions apply for small-volume engine and equipment manufacturers?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Administration at 13 CFR 121.201) that manufactures nonroad spark-ignition engines or equipment, but you do not... began manufacturing engines before, during, or after 2007. We may set other reasonable conditions that... deterioration factors. See § 1054.240. (4) Waived requirements for production-line testing. See § 1054.301. (5...

Selection of Additive Manufacturing (AM) Equipment

DTIC Science & Technology

2017-04-01

in the design , test, and fabrication of the systems within the AMRDEC portfolio. 14. SUBJECT TERMS Additive Manufacturing (AM), Fused Deposition...tools in the design and development of AMRDEC products .   Figure 1. Stratasys Objet Connex3 [1] While these machines and technologies have...TECHNICAL REPORT RDMR-WD-16-87 SELECTION OF ADDITIVE MANUFACTURING (AM) EQUIPMENT Lance E. Hall Weapons Development

76 FR 26609 - Revisions to the California State Implementation Plan, San Joaquin Valley Unified Air Pollution...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

... that manufacturers would be forced to alter the design or emission control equipment on new nonroad... in practical effect force manufacturers to alter the design or emission control equipment on new... manufacturer or user of a nonroad engine or vehicle to change the emission control design of the engine or...

76 FR 60599 - Reports, Forms and Recordkeeping Requirements Agency Information Collection Activity Under OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

...), NHTSA reasonably may require a manufacturer of a motor vehicle or motor vehicle equipment to keep..., purchasers, and dealers if the manufacturer (1) learn that any vehicle or equipment manufactured by it contains a defect and decides in good faith that the defect relates to motor vehicle safety, or (2) decides...

77 FR 3323 - Airborne Radar Altimeter Equipment (For Air Carrier Aircraft)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-23

... been no new applications for TSOA for TSO-C67. Our research indicates there are no authorized manufacturers currently manufacturing, advertising, or selling TSO-C67 compliant equipment. Therefore, given the...

Throughput Optimization of Continuous Biopharmaceutical Manufacturing Facilities.

PubMed

Garcia, Fernando A; Vandiver, Michael W

2017-01-01

In order to operate profitably under different product demand scenarios, biopharmaceutical companies must design their facilities with mass output flexibility in mind. Traditional biologics manufacturing technologies pose operational challenges in this regard due to their high costs and slow equipment turnaround times, restricting the types of products and mass quantities that can be processed. Modern plant design, however, has facilitated the development of lean and efficient bioprocessing facilities through footprint reduction and adoption of disposable and continuous manufacturing technologies. These development efforts have proven to be crucial in seeking to drastically reduce the high costs typically associated with the manufacturing of recombinant proteins. In this work, mathematical modeling is used to optimize annual production schedules for a single-product commercial facility operating with a continuous upstream and discrete batch downstream platform. Utilizing cell culture duration and volumetric productivity as process variables in the model, and annual plant throughput as the optimization objective, 3-D surface plots are created to understand the effect of process and facility design on expected mass output. The model shows that once a plant has been fully debottlenecked it is capable of processing well over a metric ton of product per year. Moreover, the analysis helped to uncover a major limiting constraint on plant performance, the stability of the neutralized viral inactivated pool, which may indicate that this should be a focus of attention during future process development efforts. LAY ABSTRACT: Biopharmaceutical process modeling can be used to design and optimize manufacturing facilities and help companies achieve a predetermined set of goals. One way to perform optimization is by making the most efficient use of process equipment in order to minimize the expenditure of capital, labor and plant resources. To that end, this paper introduces a novel mathematical algorithm used to determine the most optimal equipment scheduling configuration that maximizes the mass output for a facility producing a single product. The paper also illustrates how different scheduling arrangements can have a profound impact on the availability of plant resources, and identifies limiting constraints on the plant design. In addition, simulation data is presented using visualization techniques that aid in the interpretation of the scientific concepts discussed. © PDA, Inc. 2017.

A combined approach of simulation and analytic hierarchy process in assessing production facility layouts

NASA Astrophysics Data System (ADS)

Ramli, Razamin; Cheng, Kok-Min

2014-07-01

One of the important areas of concern in order to obtain a competitive level of productivity in a manufacturing system is the layout design and material transportation system (conveyor system). However, changes in customers' requirements have triggered the need to design other alternatives of the manufacturing layout for existing production floor. Hence, this paper discusses effective alternatives of the process layout specifically, the conveyor system layout. Subsequently, two alternative designs for the conveyor system were proposed with the aims to increase the production output and minimize space allocation. The first proposed layout design includes the installation of conveyor oven in the particular manufacturing room based on priority, and the second one is the one without the conveyor oven in the layout. Simulation technique was employed to design the new facility layout. Eventually, simulation experiments were conducted to understand the performance of each conveyor layout design based on operational characteristics, which include predicting the output of layouts. Utilizing the Analytic Hierarchy Process (AHP), the newly and improved layout designs were assessed before the final selection was done. As a comparison, the existing conveyor system layout was included in the assessment process. Relevant criteria involved in this layout design problem were identified as (i) usage of space of each design, (ii) operator's utilization rates, (iii) return of investment (ROI) of the layout, and (iv) output of the layout. In the final stage of AHP analysis, the overall priority of each alternative layout was obtained and thus, a selection for final use by the management was made based on the highest priority value. This efficient planning and designing of facility layout in a particular manufacturing setting is able to minimize material handling cost, minimize overall production time, minimize investment in equipment, and optimize utilization of space.

Pollution prevention applications in batch manufacturing operations

NASA Astrophysics Data System (ADS)

Sykes, Derek W.; O'Shaughnessy, James

2004-02-01

Older, "low-tech" batch manufacturing operations are often fertile grounds for gains resulting from pollution prevention techniques. This paper presents a pollution prevention technique utilized for wastewater discharge permit compliance purposes at a batch manufacturer of detergents, deodorants, and floor-care products. This manufacturer generated industrial wastewater as a result of equipment rinses required after each product batch changeover. After investing a significant amount of capital on end of pip-line wastewater treatment technology designed to address existing discharge limits, this manufacturer chose to investigate alternate, low-cost approaches to address anticipated new permit limits. Mass balances using spreadsheets and readily available formulation and production data were conducted on over 300 products to determine how each individual product contributed to the total wastewater pollutant load. These mass balances indicated that 22 products accounted for over 55% of the wastewater pollutant. Laboratory tests were conducted to determine whether these same products could accept their individual changeover rinse water as make-up water in formulations without sacrificing product quality. This changeover reuse technique was then implement at the plant scale for selected products. Significant reductions in wastewater volume (25%) and wastewater pollutant loading (85+%) were realized as a direct result of this approach.

Amorphous silicon photovoltaic manufacturing technology, phase 2A

NASA Astrophysics Data System (ADS)

Duran, G.; Mackamul, K.; Metcalf, D.

1995-01-01

Utility Power Group (UPG), and its lower-tier subcontractor, Advanced Photovoltaic Systems, Inc. (APS) have conducted efforts in developing their manufacturing lines. UPG has focused on the automation of encapsulation and termination processes developed in Phase 1. APS has focused on completion of the encapsulation and module design tasks, while continuing the process and quality control and automation projects. The goal is to produce 55 watt (stabilized) EP50 modules in a new facility. In the APS Trenton EUREKA manufacturing facility, APS has: (1) Developed high throughput lamination procedures; (2) Optimized existing module designs; (3) Developed new module designs for architectural applications; (4) Developed enhanced deposition parameter control; (5) Designed equipment required to manufacture new EUREKA modules developed during Phase II; (6) Improved uniformity of thin-film materials deposition; and (7) Improved the stabilized power output of the APS EP50 EUREKA module to 55 watts. In the APS Fairfield EUREKA manufacturing facility, APS has: (1) Introduced the new products developed under Phase 1 into the APS Fairfield EUREKA module production line; (2) Increased the extent of automation in the production line; (3) Introduced Statistical Process Control to the module production line; and (4) Transferred-progress made in the APS Trenton facility into the APS Fairfield facility.

Non-invasive system for monitoring of the manufacturing equipment

NASA Astrophysics Data System (ADS)

Mazăre, A. G.; Belu, N.; Ionescu, L. M.; Rachieru, N.; Misztal, A.

2017-08-01

The automotive industry is one of the most important industries in the world that concerns the economy and the world culture. High demand has resulted in increasing of the pressure on the production lines. In conclusion, it is required more careful in monitoring of the production equipment not only for maintenance but also for staff safety and to increase the quality of production. In this paper, we propose a solution for non-invasive monitoring of the industrial equipment operation by measuring the current consumption on energy supply lines. Thus, it is determined the utilization schedule of the equipment and operation mode. Based on these measurements, it’s built an activity report for that equipment, available to the quality management and maintenance team. The solution consists of the current measuring equipment, with self-harvesting capabilities and radio transceiver, and an embedded system which run a server. The current measuring equipment will transmit data about consumption of each energy supply network line where is placed the industrial equipment. So, we have an internal measuring radio network. The embedded system will collect data for the equipment and put in a local data base and it will provide via an intranet application. The entire system not requires any supplementary energy supply and interventions in the factory infrastructure. It is experimented in a company from the automotive industries.

78 FR 78812 - Notice of Petitions by Firms for Determination of Eligibility to Apply for Trade Adjustment...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... recreational Way, Burlington, WA trawlers/yachts. 98233. CPAC Equipment, Inc 2364 Leicester Road, The firm manufactures dry heat Leicester, NY 14481. sterilizers and dental evacuation equipment. S3 Manufacturing, Inc...

Utilization of wheel dop based on ergonomic aspects

NASA Astrophysics Data System (ADS)

Widiasih, Wiwin; Murnawan, Hery; Setiawan, Danny

2017-06-01

Time is an important thing in life. People need a tool or equipment to measure time which is divided into two types, namely clock and watch. Everyone needs those kinds of tool. It becomes an opportunity for manufacturer to build a business. However, establishing a business by depending on the demand is not enough, it is necessary to take a consideration of making innovation. Innovation is a difficult thing to find out, but it is not impossible to do it. By creating an innovative product, it can be a strategy to win the competitive market. This study aimed to create an innovative product based on the ergonomic aspects, which was by utilizing wheel dop. This methodology consisted of pre-study, planning and product development, and product analysis. This product utilized wheel dop and was made based on the ergonomic aspects.

Diagnosis of the Computer-Controlled Milling Machine, Definition of the Working Errors and Input Corrections on the Basis of Mathematical Model

NASA Astrophysics Data System (ADS)

Starikov, A. I.; Nekrasov, R. Yu; Teploukhov, O. J.; Soloviev, I. V.; Narikov, K. A.

2016-10-01

Manufactures, machinery and equipment improve of constructively as science advances and technology, and requirements are improving of quality and longevity. That is, the requirements for surface quality and precision manufacturing, oil and gas equipment parts are constantly increasing. Production of oil and gas engineering products on modern machine tools with computer numerical control - is a complex synthesis of technical and electrical equipment parts, as well as the processing procedure. Technical machine part wears during operation and in the electrical part are accumulated mathematical errors. Thus, the above-mentioned disadvantages of any of the following parts of metalworking equipment affect the manufacturing process of products in general, and as a result lead to the flaw.

IMPROVED EQUIPMENT CLEANING IN COATED AND LAMINATED SUBSTRATE MANUFACTURING FACILITIES (PHASE II)

EPA Science Inventory

The report discusses EPA efforts to identify, demonstrate, and publish pollution prevention information and opportunities for equipment cleaning for the coated and laminated substrate manufacturing industry. It summarizes initial data collected and summarized during industry obse...

77 FR 55605 - Early Warning Reporting, Foreign Defect Reporting, and Motor Vehicle and Equipment Recall...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-10

... requires quarterly reporting of early warning information: Production information; information on incidents... manufacturers, and other equipment manufacturers) and the annual production of the entity. The EWR information... vehicle type as part of [[Page 55608

76 FR 21813 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-19

... provisions for commercial refrigeration equipment; commercial heating, ventilating, air- conditioning (HVAC... to meet that deadline. In particular, manufacturers of commercial refrigeration equipment; commercial... compliance date for filing complete certification reports for manufacturers of commercial refrigeration...

Automated lithocell

NASA Astrophysics Data System (ADS)

Englisch, Andreas; Deuter, Armin

1990-06-01

Integration and automation have gained more and more ground in modern IC-manufacturing. It is difficult to make a direct calculation of the profit these investments yield. On the other hand, the demands to man, machine and technology have increased enormously of late; it is not difficult to see that only by means of integration and automation can these demands be coped with. Here are some salient points: U the complexity and costs incurred by the equipment and processes have got significantly higher . owing to the reduction of all dimensions, the tolerances within which the various process steps have to be carried out have got smaller and smaller and the adherence to these tolerances more and more difficult U the cycle time has become more and more important both for the development and control of new processes and, to a great extent, for a rapid and reliable supply to the customer. In order that the products be competitive under these conditions, all sort of costs have to be reduced and the yield has to be maximized. Therefore, the computer-aided control of the equipment and the process combined with an automatic data collection and a real-time SPC (statistical process control) has become absolutely necessary for successful IC-manufacturing. Human errors must be eliminated from the execution of the various process steps by automation. The work time set free in this way makes it possible for the human creativity to be employed on a larger scale in stabilizing the processes. Besides, a computer-aided equipment control can ensure the optimal utilization of the equipment round the clock.

Fine pitch thermosonic wire bonding: analysis of state-of-the-art manufacturing capability

NASA Astrophysics Data System (ADS)

Cavasin, Daniel

1995-09-01

A comprehensive process characterization was performed at the Motorola plastic package assembly site in Selangor, Malaysia, to document the current fine pitch wire bond process capability, using state-of-the-art equipment, in an actual manufacturing environment. Two machines, representing the latest technology from two separate manufacturers, were operated one shift per day for five days, bonding a 132 lead Plastic Quad Flat Pack. Using a test device specifically designed for fine pitch wire bonding, the bonding programs were alternated between 107 micrometers and 92 micrometers pad pitch, running each pitch for a total of 1600 units per machine. Wire, capillary type, and related materials were standardized and commercially available. A video metrology measurement system, with a demonstrated six sigma repeatability band width of 0.51 micrometers , was utilized to measure the bonded units for bond dimensions and placement. Standard Quality Assurance (QA) metrics were also performed. Results indicate that state-of-the-art thermosonic wire bonding can achieve acceptable assembly yields at these fine pad pitches.

Safety concerns in composite manufacturing and machining

NASA Astrophysics Data System (ADS)

Asmatulu, Eylem; Alonayni, Abdullah; Alamir, Mohammed

2018-03-01

Because of the superior properties, composites have been used in many industrial applications, including aerospace, wind turbines, ships, cars, fishing rods, storage tanks, swimming pool panels, and baseball bats. Each application may require different combinations of reinforcements and matrices, which make the manufacturing safety even more challenging while working on these substances. In this study, safety issues in composite manufacturing and machining were investigated in detail, and latest developments were provided for workers. The materials most frequently used in composite manufacturing, such as matrix (polyester, vinylester, phenolic, epoxies, methyl ethyl ketone peroxide, benzoil peroxide, hardeners, and solvents), and reinforcement materials (carbon, glass and Kevlar fibers, honeycomb and foams) can be highly toxic to human body. These materials can also be very toxic to the environment when dumped out uncontrollably, creating major future health and environmental concerns. Throughout the manufacturing process, workers inhale vapors of the liquid matrix, hardeners and solvents / thinners, as well as reinforcement materials (chopped fibers and particles) in airborne. Milling, cutting and machining of the composites can further increase the toxic inhalations of airborne composite particles, resulting in major rashes, irritation, skin disorders, coughing, severe eye and lung injury and other serious illnesses. The major portions of these hazardous materials can be controlled using appropriate personal protective equipment for the chemicals and materials used in composite manufacturing and machining. This study provides best possible safety practices utilized in composite manufacturing facilities for workers, engineers and other participants.

IMPROVED EQUIPMENT CLEANING IN COATED AND LAMINATED SUBSTRATE MANUFACTURING FACILITIES (PHASE I)

EPA Science Inventory

The report gives results of a Phase I study to characterize current equipment cleaning practices in the coated and laminated substrate manufacturing industry, to identify alternative cleaning technologies, and to identify demonstrable technologies and estimate their emissions imp...

You can't eat moon rocks. [aerospace technology spinoffs assessment

NASA Technical Reports Server (NTRS)

Kubokawa, C. C.

1976-01-01

The effects produced by the aerospace program are investigated. The technology developed from aerospace-related research, development, and manufacturing has been made available to the public for its use through the NASA Technology Utilization Program. A description is presented of 'spinoffs' of NASA's aerospace programs which are used on a daily basis by the public. Attention is given to the liquid cooled garment technology, meal systems for the elderly, the zinc-rich coating, the emergency blanket, the flexible urethane foam Temper Foam, the 'Fog-Away Coating', and composite graphite equipment.

Assembly flow simulation of a radar

NASA Technical Reports Server (NTRS)

Rutherford, W. C.; Biggs, P. M.

1994-01-01

A discrete event simulation model has been developed to predict the assembly flow time of a new radar product. The simulation was the key tool employed to identify flow constraints. The radar, production facility, and equipment complement were designed, arranged, and selected to provide the most manufacturable assembly possible. A goal was to reduce the assembly and testing cycle time from twenty-six weeks. A computer software simulation package (SLAM 2) was utilized as the foundation for simulating the assembly flow time. FORTRAN subroutines were incorporated into the software to deal with unique flow circumstances that were not accommodated by the software. Detailed information relating to the assembly operations was provided by a team selected from the engineering, manufacturing management, inspection, and production assembly staff. The simulation verified that it would be possible to achieve the cycle time goal of six weeks. Equipment and manpower constraints were identified during the simulation process and adjusted as required to achieve the flow with a given monthly production requirement. The simulation is being maintained as a planning tool to be used to identify constraints in the event that monthly output is increased. 'What-if' studies have been conducted to identify the cost of reducing constraints caused by increases in output requirement.

46 CFR 160.072-09 - Manufacturer notification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Manufacturer notification. 160.072-09 Section 160.072-09 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Distress Signals for Boats, Orange Flag § 160.072-09...

Research on the competitiveness of high-tech industries in northeast China

NASA Astrophysics Data System (ADS)

Liu, Lei; Wang, Yang; Wang, Ming-Quan; Xiao, Yan-Bo; Gao, Ming

2017-06-01

Based on characteristics of high-tech industry in Northeast China, high-tech industry competitiveness index system was developed, and the competitiveness of high-tech industry was evaluated through principal component analysis and location quotient method. The results showed that the scale of high-tech industry in Northeast China as a whole was small, and presented a decreasing trend for the proportion in the country. The competitiveness of high-tech industry in Northeast China lagged far behind that of the eastern and central regions. The high-tech industry competitiveness of Liaoning, Jilin and Heilongjiang provinces in China ranked 15, 19 and 21, respectively. The manufacture of medicine in Jilin province, and the manufacture of aircraft and spacecraft and the related equipment in Liaoning and Heilongjiang provinces had high competitive advantage, but the manufacture of electronic equipment and communication equipment and the manufacture of computers and office equipment was lack of competitiveness. The development suggestions were put forward to improve the competitiveness of high-tech industries in Northeast China.

Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing.

PubMed

Xiao, Hao; Sun, Tianyang; Meng, Bo; Cheng, Lihong

2017-01-01

The rise of global value chains (GVCs) characterized by the so-called "outsourcing", "fragmentation production", and "trade in tasks" has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014) and Wang et al. (2013) in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics.

Manufacturing engineering: Principles for optimization

NASA Astrophysics Data System (ADS)

Koenig, Daniel T.

Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

Mission Analysis for Using Preventive Radiological/Nuclear Detection Equipment for Consequence Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buddemeier, Brooke R.; Wood-Zika, Annmarie R.; Haynes, Daniel

The overall objective of this project is to research, evaluate, and test first responder preventive radiological/nuclear detection (PRND) equipment to provide state and local agencies with scientific guidance on how to effectively use this equipment for response after a radiological/nuclear release or detonation. While the equipment being tested in this effort has been specifically designed by technology manufacturers and purchased by responders for preventive detection and source interdiction operations, the fleet of PRND equipment can help fill critical needs for radiological instrumentation should a consequence management (CM) response take place, as it is currently the most widely available and fieldedmore » radiological instrumentation by state and local agencies. This effort will provide scientific guidance on the most effective way to utilize this class of equipment for consequence management missions. Gaining a better understanding of how PRND equipment can operate and perform for these missions will allow for recommendations on the tactical approach responders can use for consequence management operations. PRND equipment has been placed into service by federal, state, and local agencies throughout the nation. If the equipment capability and limitations are taken into account, this large inventory can be leveraged to support the emergency response in the aftermath of a radiological or nuclear event. With several hundred makes and models of PRND equipment, often with significantly different detection capabilities that do not align with their nominal PRND equipment type, development of a streamlined categorization scheme with respect to consequence management missions was the first step to identifying safe and effective uses of PRND equipment for radiological/nuclear incident response.« less

Manufacturing Laboratory | Energy Systems Integration Facility | NREL

Science.gov Websites

Manufacturing Laboratory Manufacturing Laboratory Researchers in the Energy Systems Integration Facility's Manufacturing Laboratory develop methods and technologies to scale up renewable energy technology manufacturing capabilities. Photo of researchers and equipment in the Manufacturing Laboratory. Capability Hubs

Evaluating alternative service contracts for medical equipment.

PubMed

De Vivo, L; Derrico, P; Tomaiuolo, D; Capussotto, C; Reali, A

2004-01-01

Managing medical equipments is a formidable task that has to be pursued maximizing the benefits within a highly regulated and cost-constrained environment. Clinical engineers are uniquely equipped to determine which policies are the most efficacious and cost effective for a health care institution to ensure that medical devices meet appropriate standards of safety, quality and performance. Part of this support is a strategy for preventive and corrective maintenance. This paper describes an alternative scheme of OEM (Original Equipment Manufacturer) service contract for medical equipment that combines manufacturers' technical support and in-house maintenance. An efficient and efficacious organization can reduce the high cost of medical equipment maintenance while raising reliability and quality. Methodology and results are discussed.

47 CFR 68.320 - Supplier's Declaration of Conformity.

Code of Federal Regulations, 2010 CFR

2010-10-01

... steps to ensure that the terminal equipment complies with the appropriate technical standards. (b) The... shown to comply with the applicable technical criteria if no unauthorized change is made in the... from the manufacturer, may upon receiving a written statement from the manufacturer that the equipment...

The association of occupational metals exposure and oxidative damage, telomere shortening in fitness equipments manufacturing workers

PubMed Central

KO, Jiunn-Liang; CHENG, Yu-Jung; LIU, Guan-Cen; HSIN, I-Lun; CHEN, Hsiu-Ling

2017-01-01

The welding is the major working process in fitness equipment manufacturing industry, and International Agency for Research on Cancer has classified welding fumes as possibly carcinogenic to humans (Group 2B). The present study aimed to evaluate associations between the occupational exposure of metals and oxidative damage and telomere length shortening in workers involved in the manufacture of fitness equipment. The blood metal concentrations were monitored and malondialdehyde (MDA), alkaline Comet assay was determined as oxidative damage in 117 workers from two representative fitness equipment manufacturing plants. MDA levels varied according to workers’ roles at the manufacturing plants, and showed a trend as cutting>painting>welding>administration workers. Welders had marginally shorter average telomere lengths than the administrative workers (p=0.058). Cr and Mn levels were significantly greater in welders than they were in administrative workers. There were significantly positive correlations between MDA and Cr and Mn levels, the major components of welding fume. However, the association would be eliminated if co-metals exposure were considered simultaneously. In future, telomere length and MDA might be potential biomarkers for predicting cardiovascular disease in co-metals exposed workers. PMID:28420806

76 FR 38287 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-30

... commercial refrigeration equipment; commercial heating, ventilating, air- conditioning (HVAC) equipment..., manufacturers of commercial refrigeration equipment; commercial HVAC equipment; commercial WH equipment; walk-in... extension to the compliance date for the certification provisions for commercial refrigeration equipment...

Financial statistics of major US investor-owned electric utilities 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Financial Statistics of Major US Investor-Owned Electric Utilities publication presents summary and detailed financial accounting data on the investor-owned electric utilities. The objective of the publication is to provide Federal and State governments, industry, and the general public with current and historical data that can be used for policymaking and decisionmaking purposes related to investor-owned electric utility issues. The Financial Statistics of Major US Investor-Owned Electric Utilities publication provides information about the financial results of operations of investor-owned electric utilities for use by government, industry, electric utilities, financial organizations and educational institutions in energy planning. In the private sector,more » the readers of this publication are researchers and analysts associated with the financial markets, the policymaking and decisionmaking members of electric utility companies, and economic development organizations. Other organizations that may be interested in the data presented in this publication include manufacturers of electric power equipment and marketing organizations. In the public sector, the readers of this publication include analysts, researchers, statisticians, and other professionals engaged in regulatory, policy, and program areas. These individuals are generally associated with the Congress, other legislative bodies, State public utility commissions, universities, and national strategic planning organizations.« less

21 CFR 111.27 - What requirements apply to the equipment and utensils that you use?

Code of Federal Regulations, 2010 CFR

2010-04-01

... HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Equipment and Utensils § 111... utensils that are of appropriate design, construction, and workmanship to enable them to be suitable for...

DARPA DICE Manufacturing Optimization

DTIC Science & Technology

1993-01-01

Entity ................................................... 13 3.3.4 Labor Entity ....................................................... 14 3.3.5 Equipment...51 4.2.13.4 Labor Specification .................................... 52 4.2.13.5 Facility Specification .................................. 543...resources. A I resource is any facility, labor , equipment, or consumable material used in the manufacturing U UNCLASSIFIED CDRL No.0002AB-5 process. A

Two-Part Tariff and Aftermarket Duopoly: An Illustration

ERIC Educational Resources Information Center

Felder, Joseph; Scott, Robert

2010-01-01

The authors shed light on the original equipment manufacturer's strategic behavior in the duopoly aftermarket. The original equipment manufacturer, firm 1, captures via its foremarket price some fraction of the aftermarket consumer surplus, where that surplus is generated by consumption of its own and its competitor's aftermarket products. The…

CATV Directory of Equipment, Services, and Manufacturers.

ERIC Educational Resources Information Center

1972

The ninth edition of the Directory of CATV Equipment and Services is organized for rapid reference to all products and services provided to CATV (cable television) operators, contractors, and investors. An index to display advertisers and addresses and general data about manufacturers and suppliers are provided first. The information about…

49 CFR 393.40 - Required brake systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... subpart. (2) Air brake systems. Buses, trucks and truck-tractors equipped with air brake systems and..., and 393.52 of this subpart. (4) Electric brake systems. Motor vehicles equipped with electric brake..., trucks and truck tractors manufactured on or after March 1, 1975, and trailers manufactured on or after...

77 FR 65878 - Application for Final Commitment for a Long-term Loan or Financial Guarantee in Excess of $100...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-31

... export of semiconductor manufacturing equipment to Germany. Brief non-proprietary description of the anticipated use of the items being exported: Equipment supports the manufacture of logic semiconductors. To... United States industry. Parties: Principal Suppliers: Applied Materials, Inc., KLA-Tencor Corporation...

46 CFR 175.800 - Approved equipment and material.

Code of Federal Regulations, 2011 CFR

2011-10-01

... required by this subchapter to be approved or of an approved type, must have been manufactured and approved... Accepted under Marine Inspection and Navigation Laws” lists approved equipment by type and manufacturer. COMDTINST M16714.3 (Series) may be obtained from New Orders, Superintendent of Documents, P.O. Box 371954...

46 CFR 175.800 - Approved equipment and material.

Code of Federal Regulations, 2010 CFR

2010-10-01

... required by this subchapter to be approved or of an approved type, must have been manufactured and approved... Accepted under Marine Inspection and Navigation Laws” lists approved equipment by type and manufacturer. COMDTINST M16714.3 (Series) may be obtained from New Orders, Superintendent of Documents, P.O. Box 371954...

Transforming the market for commercial and industrial distribution transformers: A government, manufacturer, and utility collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeLaski, A.; Gauthier, J.; Shugars, J.

Distribution transformers offer a largely untapped opportunity for efficiency improvements in buildings. Application of energy-efficient equipment can reduce transformer losses by about 20%, substantially cutting a facility's total electricity bill and offering typical paybacks less than three years. Since nearly all of the electricity powering the commercial and industrial sectors is stepped down in voltage by facility-owned distribution transformers, broad application of energy-efficient equipment will lead to huge economy-wide energy and dollar savings as well as associated environmental benefits. This opportunity has led to a multi-party coordinated effort that offers a new model for national partnerships to pursue market transformation.more » The model, called the Informal Collaborative Model for the purposes of this paper, is characterized by voluntary commitments of multiple stakeholders to carry out key market interventions in a coordinated fashion, but without pooling resources or control. Collaborative participants are joined by a common interest in establishing and expanding the market for a new product, service, or practice that will yield substantial energy savings. This paper summarizes the technical efficiency opportunity available in distribution transformers; discusses the market barriers to widespread adoption of energy-efficient transformers; and details an overall market transformation strategy to address the identified market barriers. The respective roles of each of the diverse players--manufacturers, government agencies, and utility and regional energy efficiency programs--are given particular attention. Each of the organizations involved brings a particular set of tools and capabilities for addressing the market barriers to more efficient transformers.« less

Structure/property (constitutive and dynamic strength/damage) characterization of additively manufactured 316L SS

NASA Astrophysics Data System (ADS)

Gray, G. T., III; Livescu, V.; Rigg, P. A.; Trujillo, C. P.; Cady, C. M.; Chen, S. R.; Carpenter, J. S.; Lienert, T. J.; Fensin, S.

2015-09-01

For additive manufacturing (AM), the certification and qualification paradigm needs to evolve as there exists no "ASTM-type" additive manufacturing certified process or AM-material produced specifications. Accordingly, utilization of AM materials to meet engineering applications requires quantification of the constitutive properties of these evolving materials in comparison to conventionally-manufactured metals and alloys. Cylinders of 316L SS were produced using a LENS MR-7 laser additive manufacturing system from Optomec (Albuquerque, NM) equipped with a 1kW Yb-fiber laser. The microstructure of the AM-316L SS is detailed in both the as-built condition and following heat-treatments designed to obtain full recrystallization. The constitutive behavior as a function of strain rate and temperature is presented and compared to that of nominal annealed wrought 316L SS plate. The dynamic damage evolution and failure response of all three materials was probed using flyer-plate impact driven spallation experiments at a peak stress of 4.5 GPa to examine incipient spallation response. The spall strength of AM-produced 316L SS was found to be very similar for the peak shock stress studied to that of annealed wrought or AM-316L SS following recrystallization. The damage evolution as a function of microstructure was characterized using optical metallography.

Blast optimization for improved dragline productivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humphreys, M.; Baldwin, G.

1994-12-31

A project aimed at blast optimization for large open pit coal mines is utilizing blast monitoring and analysis techniques, advanced dragline monitoring equipment, and blast simulation software, to assess the major controlling factors affecting both blast performance and subsequent dragline productivity. This has involved collaborative work between the explosives supplier, mine operator, monitoring equipment manufacturer, and a mining research organization. The results from trial blasts and subsequently monitored dragline production have yielded promising results and continuing studies are being conducted as part of a blast optimization program. It should be stressed that the optimization of blasting practices for improved draglinemore » productivity is a site specific task, achieved through controlled and closely monitored procedures. The benefits achieved at one location can not be simply transferred to another minesite unless similar improvement strategies are first implemented.« less

Implementation of a configurable laboratory information management system for use in cellular process development and manufacturing.

PubMed

Russom, Diana; Ahmed, Amira; Gonzalez, Nancy; Alvarnas, Joseph; DiGiusto, David

2012-01-01

Regulatory requirements for the manufacturing of cell products for clinical investigation require a significant level of record-keeping, starting early in process development and continuing through to the execution and requisite follow-up of patients on clinical trials. Central to record-keeping is the management of documentation related to patients, raw materials, processes, assays and facilities. To support these requirements, we evaluated several laboratory information management systems (LIMS), including their cost, flexibility, regulatory compliance, ongoing programming requirements and ability to integrate with laboratory equipment. After selecting a system, we performed a pilot study to develop a user-configurable LIMS for our laboratory in support of our pre-clinical and clinical cell-production activities. We report here on the design and utilization of this system to manage accrual with a healthy blood-donor protocol, as well as manufacturing operations for the production of a master cell bank and several patient-specific stem cell products. The system was used successfully to manage blood donor eligibility, recruiting, appointments, billing and serology, and to provide annual accrual reports. Quality management reporting features of the system were used to capture, report and investigate process and equipment deviations that occurred during the production of a master cell bank and patient products. Overall the system has served to support the compliance requirements of process development and phase I/II clinical trial activities for our laboratory and can be easily modified to meet the needs of similar laboratories.

Comparison of Shallow Survey 2012 Multibeam Datasets

NASA Astrophysics Data System (ADS)

Ramirez, T. M.

2012-12-01

The purpose of the Shallow Survey common dataset is a comparison of the different technologies utilized for data acquisition in the shallow survey marine environment. The common dataset consists of a series of surveys conducted over a common area of seabed using a variety of systems. It provides equipment manufacturers the opportunity to showcase their latest systems while giving hydrographic researchers and scientists a chance to test their latest algorithms on the dataset so that rigorous comparisons can be made. Five companies collected data for the Common Dataset in the Wellington Harbor area in New Zealand between May 2010 and May 2011; including Kongsberg, Reson, R2Sonic, GeoAcoustics, and Applied Acoustics. The Wellington harbor and surrounding coastal area was selected since it has a number of well-defined features, including the HMNZS South Seas and HMNZS Wellington wrecks, an armored seawall constructed of Tetrapods and Akmons, aquifers, wharves and marinas. The seabed inside the harbor basin is largely fine-grained sediment, with gravel and reefs around the coast. The area outside the harbor on the southern coast is an active environment, with moving sand and exposed reefs. A marine reserve is also in this area. For consistency between datasets, the coastal research vessel R/V Ikatere and crew were used for all surveys conducted for the common dataset. Using Triton's Perspective processing software multibeam datasets collected for the Shallow Survey were processed for detail analysis. Datasets from each sonar manufacturer were processed using the CUBE algorithm developed by the Center for Coastal and Ocean Mapping/Joint Hydrographic Center (CCOM/JHC). Each dataset was gridded at 0.5 and 1.0 meter resolutions for cross comparison and compliance with International Hydrographic Organization (IHO) requirements. Detailed comparisons were made of equipment specifications (transmit frequency, number of beams, beam width), data density, total uncertainty, and IHO compliance. Results from an initial analysis indicate that more factors need to be considered to properly compare sonar quality from processed results than just utilizing the same vessel with the same vessel configuration. Survey techniques such as focusing the beams over a narrower beam width can greatly increase data quality. While each sonar manufacturer was required to meet Special Order IHO specifications, line spacing was not specified and allowed for a greater data density despite equipment specification.

About Personal Protective Equipment (PPE)

MedlinePlus

... Equipment for Infection Control Questions About Personal Protective Equipment (PPE) Share Tweet Linkedin Pin it More sharing ... Print Q1. How do manufacturers ensure personal protective equipment (PPE) is safe and effective? A1. To help ...

24 CFR 982.624 - Manufactured home space rental: Utility allowance schedule.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Manufactured home space rental... Special Housing Types Manufactured Home Space Rental § 982.624 Manufactured home space rental: Utility allowance schedule. The PHA must establish utility allowances for manufactured home space rental. For the...

24 CFR 982.624 - Manufactured home space rental: Utility allowance schedule.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Manufactured home space rental... Special Housing Types Manufactured Home Space Rental § 982.624 Manufactured home space rental: Utility allowance schedule. The PHA must establish utility allowances for manufactured home space rental. For the...

24 CFR 982.624 - Manufactured home space rental: Utility allowance schedule.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Manufactured home space rental... Special Housing Types Manufactured Home Space Rental § 982.624 Manufactured home space rental: Utility allowance schedule. The PHA must establish utility allowances for manufactured home space rental. For the...

40 CFR 61.144 - Standard for manufacturing.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., twine, rope, thread, yarn, roving, lap, or other textile materials. (2) The manufacture of cement... manufacturing facility, including air cleaning devices, process equipment, and buildings housing material...

40 CFR 61.144 - Standard for manufacturing.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., twine, rope, thread, yarn, roving, lap, or other textile materials. (2) The manufacture of cement... manufacturing facility, including air cleaning devices, process equipment, and buildings housing material...

40 CFR 61.144 - Standard for manufacturing.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., twine, rope, thread, yarn, roving, lap, or other textile materials. (2) The manufacture of cement... manufacturing facility, including air cleaning devices, process equipment, and buildings housing material...

40 CFR 61.144 - Standard for manufacturing.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., twine, rope, thread, yarn, roving, lap, or other textile materials. (2) The manufacture of cement... manufacturing facility, including air cleaning devices, process equipment, and buildings housing material...

40 CFR 61.144 - Standard for manufacturing.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., twine, rope, thread, yarn, roving, lap, or other textile materials. (2) The manufacture of cement... manufacturing facility, including air cleaning devices, process equipment, and buildings housing material...

Extraterrestrial processing and manufacturing of large space systems, volume 1, chapters 1-6

NASA Technical Reports Server (NTRS)

Miller, R. H.; Smith, D. B. S.

1979-01-01

Space program scenarios for production of large space structures from lunar materials are defined. The concept of the space manufacturing facility (SMF) is presented. The manufacturing processes and equipment for the SMF are defined and the conceptual layouts are described for the production of solar cells and arrays, structures and joints, conduits, waveguides, RF equipment radiators, wire cables, and converters. A 'reference' SMF was designed and its operation requirements are described.

A comparative life cycle assessment of material handling systems for sustainable mining.

PubMed

Erkayaoğlu, M; Demirel, N

2016-06-01

In this comprehensive LCA comparison study, main objectives are to investigate life cycle environmental impacts of off-highway mining trucks and belt conveyors in surface mining. The research methodology essentially entails determination of the functional unit as 20,000 tons/day coal production transported for 5 km distance. After the system boundary was selected as the entire life cycle of material handling systems including pre-manufacturing of steel parts and plastic components, manufacturing, transportation, and utilization data was compiled from equipment manufacturers and the Eco-invent database. Life cycle impact categories for both material-handling systems were identified and the developed model was implemented using SIMAPRO 7.3. Climate change and acidification were selected as major impact categories as they were considered to be major concerns in mining industry. Although manufacturing stage had a significant impact on all of the environmental parameters, utilization stage was the hotspot for the selected impact categories. The results of this study revealed that belt conveyors have a greater environmental burden in climate change impact category when compared to the trucks. On the other hand, trucks have a greater environmental burden in acidification impact category when compared to the belt conveyors. This study implied that technological improvement in fuel combustion and electricity generation is crucial for the improvement of environmental profiles of off-highway trucks and belt conveyors in the mining industry. The main novelty of this study is that it is the first initiative in applying LCA in the Turkish mining industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giovanni, D.V.; Carr, R.C.; Landham, E.C.

Two products of coal quality research at the Electric Power Research Institute TM (EPRI) are available for field evaluation: Coal Quality Impact Model (CQIM and Fireside Testing Guidelines (FIG). The CQIM is a computer program that may be tailored to simulate the performance characteristics of a coal-fired power plant. The FIG is a technical report that guides utilities in conducting field tests to gather performance data and quantify the technical and economic impacts of different coals. Moreover, the results from field tests may be utilized to validate and assess the applicability of the CQIM. Field tests were conducted at Mississippimore » Power Company`s Watson Unit 4 to evaluate the coal quality impacts of coal switching on boiler performance and emissions. Watson Unit 4 is a 255 MW (gross), opposed-wall, pulverized-coal-fired boiler manufactured by Riley Stoker Corporation and rated at 1,779,000 lb/hr steam flow at 1000{degrees}F superheat steam temperature and 2,500 psig. The unit is equipped with a cold-side electrostatic precipitator for particulate matter control. Comprehensive tests were conducted on all major equipment components, including the pulverizers, fans, combustion equipment, boiler heat transfer surfaces, air preheater, and electrostatic precipitator, for two coals. The CQIN4 was configured to predict the performance of the unit when burning each coal. The work was sponsored by EPRI, and Mississippi Power Company (MPC) was the host utility company. This report summarizes results from the field test program, including potential heat rate improvements that were identified, and the differences in unit operations and performance for the two coals. The results from the CQIM validation effort are also presented.« less

21 CFR 110.40 - Equipment and utensils.

Code of Federal Regulations, 2011 CFR

2011-04-01

... HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD... manufacturing systems, including gravimetric, pneumatic, closed, and automated systems, shall be of a design and...

21 CFR 110.40 - Equipment and utensils.

Code of Federal Regulations, 2013 CFR

2013-04-01

... HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD... manufacturing systems, including gravimetric, pneumatic, closed, and automated systems, shall be of a design and...

21 CFR 110.40 - Equipment and utensils.

Code of Federal Regulations, 2012 CFR

2012-04-01

... HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD... manufacturing systems, including gravimetric, pneumatic, closed, and automated systems, shall be of a design and...

21 CFR 110.40 - Equipment and utensils.

Code of Federal Regulations, 2014 CFR

2014-04-01

... HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD... manufacturing systems, including gravimetric, pneumatic, closed, and automated systems, shall be of a design and...

21 CFR 110.40 - Equipment and utensils.

Code of Federal Regulations, 2010 CFR

2010-04-01

... HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD... manufacturing systems, including gravimetric, pneumatic, closed, and automated systems, shall be of a design and...

41 CFR 109-38.5104 - Other motor equipment utilization standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false Other motor equipment... AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.51-Utilization of Motor Equipment § 109-38.5104 Other motor equipment utilization standards. No utilization standards are...

41 CFR 109-38.5104 - Other motor equipment utilization standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Other motor equipment... AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.51-Utilization of Motor Equipment § 109-38.5104 Other motor equipment utilization standards. No utilization standards are...

A Review of International Space Station Habitable Element Equipment Offgassing Characteristics

NASA Technical Reports Server (NTRS)

Perry, Jay L.

2010-01-01

Crewed spacecraft trace contaminant control employs both passive and active methods to achieve acceptable cabin atmospheric quality. Passive methods include carefully selecting materials of construction, employing clean manufacturing practices, and minimizing systems and payload operational impacts to the cabin environment. Materials selection and manufacturing processes constitute the first level of equipment offgassing control. An element-level equipment offgassing test provides preflight verification that passive controls have been successful. Offgassing test results from multiple International Space Station (ISS) habitable elements and cargo vehicles are summarized and implications for active contamination control equipment design are discussed

Overlay Tolerances For VLSI Using Wafer Steppers

NASA Astrophysics Data System (ADS)

Levinson, Harry J.; Rice, Rory

1988-01-01

In order for VLSI circuits to function properly, the masking layers used in the fabrication of those devices must overlay each other to within the manufacturing tolerance incorporated in the circuit design. The capabilities of the alignment tools used in the masking process determine the overlay tolerances to which circuits can be designed. It is therefore of considerable importance that these capabilities be well characterized. Underestimation of the overlay accuracy results in unnecessarily large devices, resulting in poor utilization of wafer area and possible degradation of device performance. Overestimation will result in significant yield loss because of the failure to conform to the tolerances of the design rules. The proper methodology for determining the overlay capabilities of wafer steppers, the most commonly used alignment tool for the production of VLSI circuits, is the subject of this paper. Because cost-effective manufacturing process technology has been the driving force of VLSI, the impact on productivity is a primary consideration in all discussions. Manufacturers of alignment tools advertise the capabilities of their equipment. It is notable that no manufacturer currently characterizes his aligners in a manner consistent with the requirements of producing very large integrated circuits, as will be discussed. This has resulted in the situation in which the evaluation and comparison of the capabilities of alignment tools require the attention of a lithography specialist. Unfortunately, lithographic capabilities must be known by many other people, particularly the circuit designers and the managers responsible for the financial consequences of the high prices of modern alignment tools. All too frequently, the designer or manager is confronted with contradictory data, one set coming from his lithography specialist, and the other coming from a sales representative of an equipment manufacturer. Since the latter generally attempts to make his merchandise appear as attractive as possible, the lithographer is frequently placed in the position of having to explain subtle issues in order to justify his decisions. It is the purpose of this paper to provide that explanation.

46 CFR 160.066-5 - Design, construction, and manufacturing requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 6 2011-10-01 2011-10-01 false Design, construction, and manufacturing requirements. 160.066-5 Section 160.066-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Distress Signal for Boats, Red Aerial Pyrotechnic Flare § 160.066-5...

46 CFR 160.066-5 - Design, construction, and manufacturing requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Design, construction, and manufacturing requirements. 160.066-5 Section 160.066-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Distress Signal for Boats, Red Aerial Pyrotechnic Flare § 160.066-5...

46 CFR 160.066-5 - Design, construction, and manufacturing requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Design, construction, and manufacturing requirements. 160.066-5 Section 160.066-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Distress Signal for Boats, Red Aerial Pyrotechnic Flare § 160.066-5...

40 CFR 1039.625 - What requirements apply under the program for equipment-manufacturer flexibility?

Code of Federal Regulations, 2014 CFR

2014-07-01

... differences that justify your request. (vi) Describe your efforts to find and use other compliant engines, or... NONROAD COMPRESSION-IGNITION ENGINES Special Compliance Provisions § 1039.625 What requirements apply... manufacturers to produce equipment with engines that are subject to less stringent emission standards after the...

The Evolutionary Process of Secondary Innovation in the Context of Globalization: A Case Study

ERIC Educational Resources Information Center

Wu, Xiaobo; Xu, Guannan; Ma, Rufei; Du, Jian

2008-01-01

This paper examines the evolutionary process of secondary innovation in a typical Chinese equipment manufacturing firm in the context of globalization and elaborates how to achieve latecomer's advantage from imitation to innovation. Four stages are identified in the process of international manufacturing: the equipment import stage, the production…

Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing

PubMed Central

Meng, Bo; Cheng, Lihong

2017-01-01

The rise of global value chains (GVCs) characterized by the so-called “outsourcing”, “fragmentation production”, and “trade in tasks” has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014) and Wang et al. (2013) in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics. PMID:28081201

76 FR 77585 - Notice to Manufacturers of Airport Lighting and Navigation Aid Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

...Projects funded under the Airport Improvement Program (AIP) must meet the requirements of 49 U.S.C. 50101, Buy American Preferences. The Federal Aviation Administration (FAA) is considering issuing waivers to foreign manufacturers of certain airport lighting and navigation aid equipment that is lit with Light Emitting Diode (LED) lighting. This notice requests information from manufacturers of systems meeting the technical requirements to determine whether a waiver to the Buy American Preferences should be issued.

Consolidating a Distributed Compound Management Capability into a Single Installation: The Application of Overall Equipment Effectiveness to Determine Capacity Utilization.

PubMed

Green, Clive; Taylor, Daniel

2016-12-01

Compound management (CM) is a critical discipline enabling hit discovery through the production of assay-ready compound plates for screening. CM in pharma requires significant investments in manpower, capital equipment, repairs and maintenance, and information technology. These investments are at risk from external factors, for example, new technology rendering existing equipment obsolete and strategic site closures. At AstraZeneca, we faced the challenge of evaluating the number of CM sites required to support hit discovery in response to site closures and pressure on our operating budget. We reasoned that overall equipment effectiveness, a tool used extensively in the manufacturing sector, could determine the equipment capacity and appropriate number of sites. We identified automation downtime as the critical component governing capacity, and a connection between automation downtime and the availability of skilled staff. We demonstrated that sufficient production capacity existed in two sites to meet hit discovery demand without the requirement for an additional investment of $7 million in new facilities. In addition, we developed an automated capacity model that incorporated an extended working-day pattern as a solution for reducing automation downtime. The application of this solution enabled the transition to a single site, with an annual cost saving of $2.1 million. © 2015 Society for Laboratory Automation and Screening.

29 CFR 1919.77 - Safe working load increase.

Code of Federal Regulations, 2010 CFR

2010-07-01

... or original design limitations unless such increase meets with the manufacturer's approval. Where the manufacturer's services are not available, or where the equipment is of foreign manufacture, engineering design...

Alternative Fuels Data Center

Science.gov Websites

Advanced Technology Vehicle (ATV) and Alternative Fuel Infrastructure Manufacturing Incentives Through the Advanced Technology Vehicles Manufacturing Loan Program, manufacturers may be eligible for direct loans for up to 30% of the cost of re-equipping, expanding, or establishing manufacturing

Tools and Strategies for Product Life Cycle Management ñ A Case Study in Foundry

NASA Astrophysics Data System (ADS)

Patil, Rajashekar; Kumar, S. Mohan; Abhilash, E.

2012-08-01

Advances in information and communication technology (ICT) have opened new possibilities of collaborations among the customers, suppliers, manufactures and partners to effectively tackle various business challenges. Product Life Cycle Management(PLM) has been a proven approach for Original Equipment Manufacturers (OEMs) to increase their productivity, improve their product quality, speed up delivery, and increase their profit and to become more efficient. However, their Tier 2 and Tier 3 suppliers like foundry industries are still in their infancy without adopting PLM. Hence to enhance their understanding, the basic concepts, the tools and strategies for PLM are presented is this paper. By selecting and implementing appropriate PLM strategies in a small foundry, an attempt was also made to understand the immediate benefits of using PLM tools (commercial PLM software and digital manufacturing tools). This study indicated a reduction in lead time and improved utilization of organizational resources in the production of automobile impeller. These observations may be further extrapolated to other multiproduct, multi-discipline and multi-customer companies to realize the advantages of using PLM technology

Integrated Glass Coating Manufacturing Line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brophy, Brenor

2015-09-30

This project aims to enable US module manufacturers to coat glass with Enki’s state of the art tunable functionalized AR coatings at the lowest possible cost and highest possible performance by encapsulating Enki’s coating process in an integrated tool that facilitates effective process improvement through metrology and data analysis for greater quality and performance while reducing footprint, operating and capital costs. The Phase 1 objective was a fully designed manufacturing line, including fully specified equipment ready for issue of purchase requisitions; a detailed economic justification based on market prices at the end of Phase 1 and projected manufacturing costs andmore » a detailed deployment plan for the equipment.« less

78 FR 51381 - Early Warning Reporting, Foreign Defect Reporting, and Motor Vehicle and Equipment Recall...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-20

...NHTSA is adopting amendments to certain provisions of the early warning reporting (EWR) rule and the regulations governing motor vehicle and equipment safety recalls. The amendments to the EWR rule require light vehicle manufacturers to specify the vehicle type and the fuel and/or propulsion system type in their reports and add new component categories of stability control systems for light vehicles, buses, emergency vehicles, and medium-heavy vehicle manufacturers, and forward collision avoidance, lane departure prevention, and backover prevention for light vehicle manufacturers. These amendments will also require light vehicle manufacturers to segregate their Service Brake EWR data into two new discrete component categories. In addition, NHTSA will require motor vehicle manufacturers to report their annual list of substantially similar vehicles via the Internet. As to safety recalls, we will now require certain manufacturers to provide a VIN-based recalls lookup tool on their Web site or the Web site of a third party; require the submission of recalls reports and information via the Internet; and require adjustments to the required content of the owner notification letters and envelopes required to be issued to owners and purchasers of recalled vehicles and equipment.

33 CFR 66.01-13 - When must my newly manufactured equipment comply with these rules?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false When must my newly manufactured equipment comply with these rules? 66.01-13 Section 66.01-13 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION Aids to Navigation Other Than...

33 CFR 66.01-13 - When must my newly manufactured equipment comply with these rules?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false When must my newly manufactured equipment comply with these rules? 66.01-13 Section 66.01-13 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION Aids to Navigation Other Than...

33 CFR 66.01-13 - When must my newly manufactured equipment comply with these rules?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false When must my newly manufactured equipment comply with these rules? 66.01-13 Section 66.01-13 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION Aids to Navigation Other Than...

33 CFR 66.01-13 - When must my newly manufactured equipment comply with these rules?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false When must my newly manufactured equipment comply with these rules? 66.01-13 Section 66.01-13 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION Aids to Navigation Other Than...

33 CFR 66.01-13 - When must my newly manufactured equipment comply with these rules?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false When must my newly manufactured equipment comply with these rules? 66.01-13 Section 66.01-13 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION Aids to Navigation Other Than...

Development and Status of Cu Ball/Wedge Bonding in 2012

NASA Astrophysics Data System (ADS)

Schneider-Ramelow, Martin; Geißler, Ute; Schmitz, Stefan; Grübl, Wolfgang; Schuch, Bernhard

2013-03-01

Starting in the 1980s and continuing right into the last decade, a great deal of research has been published on Cu ball/wedge (Cu B/W) wire bonding. Despite this, the technology has not been established in industrial manufacturing to any meaningful extent. Only spikes in the price of Au, improvements in equipment and techniques, and better understanding of the Cu wire-bonding process have seen Cu B/W bonding become more widespread—initially primarily for consumer goods manufacturing. Cu wire bonding is now expected to soon be used for at least 20% of all ball/wedge-bonded components, and its utilization in more sophisticated applications is around the corner. In light of this progress, the present paper comprehensively reviews the existing literature on this topic and discusses wire-bonding materials, equipment, and tools in the ongoing development of Cu B/W bonding technology. Key bonding techniques, such as flame-off, how to prevent damage to the chip (cratering), and bond formation on various common chip and substrate finishes are also described. Furthermore, apart from discussing quality assessment of Cu wire bonds in the initial state, the paper also provides an overview of Cu bonding reliability, in particular regarding Cu balls on Al metalization at high temperatures and in humidity (including under the influence of halide ions).

Technology CAD for integrated circuit fabrication technology development and technology transfer

NASA Astrophysics Data System (ADS)

Saha, Samar

2003-07-01

In this paper systematic simulation-based methodologies for integrated circuit (IC) manufacturing technology development and technology transfer are presented. In technology development, technology computer-aided design (TCAD) tools are used to optimize the device and process parameters to develop a new generation of IC manufacturing technology by reverse engineering from the target product specifications. While in technology transfer to manufacturing co-location, TCAD is used for process centering with respect to high-volume manufacturing equipment of the target manufacturing equipment of the target manufacturing facility. A quantitative model is developed to demonstrate the potential benefits of the simulation-based methodology in reducing the cycle time and cost of typical technology development and technology transfer projects over the traditional practices. The strategy for predictive simulation to improve the effectiveness of a TCAD-based project, is also discussed.

A solution for exposure tool optimization at the 65-nm node and beyond

NASA Astrophysics Data System (ADS)

Itai, Daisuke

2007-03-01

As device geometries shrink, tolerances for critical dimension, focus, and overlay control decrease. For the stable manufacture of semiconductor devices at (and beyond) the 65nm node, both performance variability and drift in exposure tools are no longer negligible factors. With EES (Equipment Engineering System) as a guidepost, hopes of improving productivity of semiconductor manufacturing are growing. We are developing a system, EESP (Equipment Engineering Support Program), based on the concept of EES. The EESP system collects and stores large volumes of detailed data generated from Canon lithographic equipment while product is being manufactured. It uses that data to monitor both equipment characteristics and process characteristics, which cannot be examined without this system. The goal of EESP is to maximize equipment capabilities, by feeding the result back to APC/FDC and the equipment maintenance list. This was a collaborative study of the system's effectiveness at the device maker's factories. We analyzed the performance variability of exposure tools by using focus residual data. We also attempted to optimize tool performance using the analyzed results. The EESP system can make the optimum performance of exposure tools available to the device maker.

Project Hyreus: Mars Sample Return Mission Utilizing in Situ Propellant Production

NASA Technical Reports Server (NTRS)

Bruckner, A. P.; Thill, Brian; Abrego, Anita; Koch, Amber; Kruse, Ross; Nicholson, Heather; Nill, Laurie; Schubert, Heidi; Schug, Eric; Smith, Brian

1993-01-01

Project Hyreus is an unmanned Mars sample return mission that utilizes propellants manufactured in situ from the Martian atmosphere for the return voyage. A key goal of the mission is to demonstrate the considerable benefits of using indigenous resources and to test the viability of this approach as a precursor to manned Mars missions. The techniques, materials, and equipment used in Project Hyreus represent those that are currently available or that could be developed and readied in time for the proposed launch date in 2003. Project Hyreus includes such features as a Mars-orbiting satellite equipped with ground-penetrating radar, a large rover capable of sample gathering and detailed surface investigations, and a planetary science array to perform on-site research before samples are returned to Earth. Project Hyreus calls for the Mars Landing Vehicle to land in the Mangala Valles region of Mars, where it will remain for approximately 1.5 years. Methane and oxygen propellant for the Earth return voyage will be produced using carbon dioxide from the Martian atmosphere and a small supply of hydrogen brought from Earth. This process is key to returning a large Martian sample to Earth with a single Earth launch.

Project Hyreus: Mars sample return mission utilizing in situ propellant production

NASA Technical Reports Server (NTRS)

Abrego, Anita; Bair, Chris; Hink, Anthony; Kim, Jae; Koch, Amber; Kruse, Ross; Ngo, Dung; Nicholson, Heather; Nill, Laurie; Perras, Craig

1993-01-01

Project Hyreus is an unmanned Mars sample return mission that utilizes propellants manufactured in situ from the Martian atmosphere for the return voyage. A key goal of the mission is to demonstrate the considerable benefits of using indigenous resources and to test the viability of this approach as a precursor to manned Mars missions. The techniques, materials, and equipment used in Project Hyreus represent those that are currently available or that could be developed and readied in time for the proposed launch date in 2003. Project Hyreus includes such features as a Mars-orbiting satellite equipped with ground-penetrating radar, a large rover capable of sample gathering and detailed surface investigations, and a planetary science array to perform on-site research before samples are returned to Earth. Project Hyreus calls for the Mars Landing Vehicle to land in the Mangala Valles region of Mars, where it will remain for approximately 1.5 years. Methane and oxygen propellant for the Earth return voyage will be produced using carbon dioxide from the Martian atmosphere and a small supply of hydrogen brought from Earth. This process is key to returning a large Martian sample to Earth with a single Earth launch.

Report From BPTCS Project Team On Evaluation Of Additive Manufacturing For Pressure Retaining Equipment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rawls, G.

ASME is evaluating the use of additive manufacturing (AM) for the construction of pressure equipment. The information in this report assesses available AM technologies for direct metal fabrication of pressure equipment. Background information is included in the report to provide context for those not experienced in AM technology. Only commercially available technologies for direct metal fabrication are addressed in the report because these AM methods are the only viable approaches for the construction of pressure equipment. Metal AM technologies can produce near-net shape parts by using multiple layers of material from a three dimensional (3D) design model of the geometry.more » Additive manufacturing of metal components was developed from polymer based rapid prototyping or 3D printing. At the current maturity level, AM application for pressure equipment has the potential to reduce delivery times and costs for complex shapes. AM will also lead to a reduction in the use of high cost materials, since parts can be created with corrosion resistant layers of high alloy material and structural layers of lower cost materials.« less

24 CFR 3282.413 - Replacement or repurchase of manufactured home from purchaser.

Code of Federal Regulations, 2010 CFR

2010-04-01

... home be replaced by the manufacturer with a manufactured home substantially equal in size, equipment... to the attention of the Secretary. (c) In those situations where, under contract or other applicable...

Investigation of a family of power conditioners integrated into a utility grid: final report Category I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, P.; Putkovich, R.P.

1981-07-01

A study was conducted of the requirements for and technologies applicable to power conditioning equipment in residential solar photovoltaic systems. A survey of companies known or thought to manufacture power conditioning equipment was conducted to asses the technology. Technical issues regarding ac and dc interface requirements were studied. A baseline design was selected to be a good example of existing technology which would not need significant development effort for its implementation. Alternative technologies are evaluated to determine which meet the baseline specification, and their costs and losses are evaluated. Areas in which cost improvements can be obtained are studied, andmore » the three best candidate technologies--the current-sourced converter, the HF front end converter, and the programmed wave converter--are compared. It is concluded that the designs investigated will meet, or with slight improvement could meet, short term efficiency goals. Long term efficiency goals could be met if an isolation transformer were not required in the power conditioning equipment. None of the technologies studied can meet cost goals unless further improvements are possible. (LEW)« less

Sensors for Metering Heat Flux Area Density and Metrological Equipment for the Heat Flux Density Measurement

NASA Astrophysics Data System (ADS)

Doronin, D. O.

2018-04-01

The demand in measuring and studies of heat conduction of various media is very urgent now. This article considers the problem of heat conduction monitoring and measurement in various media and materials in any industries and branches of science as well as metrological support of the heat flux measurement equipment. The main study objects are both the sensors manufactured and facilities onto which these sensors will be installed: different cladding structures of the buildings, awnings, rocket fairings, boiler units, internal combustion engines. The Company develops and manufactures different types of heat flux sensors: thermocouple, thin-film, heterogeneous gradient as well as metrological equipment for the gauging calibration of the heat flux density measurement. The calibration shall be performed using both referencing method in the unit and by fixed setting of the heat flux in the unit. To manufacture heterogeneous heat flux gradient sensors (HHFGS) the Company developed and designed a number of units: diffusion welding unit, HHFGS cutting unit. Rather good quality HHFGS prototypes were obtained. At this stage the factory tests on the equipment for the heat flux density measurement equipment are planned. A high-sensitivity heat flux sensor was produced, now it is tested at the Construction Physics Research Institute (Moscow). It became possible to create thin-film heat flux sensors with the sensitivity not worse than that of the sensors manufactured by Captec Company (France). The Company has sufficient premises to supply the market with a wide range of sensors, to master new sensor manufacture technologies which will enable their application range.

21 CFR 111.30 - What requirements apply to automated, mechanical, or electronic equipment?

Code of Federal Regulations, 2012 CFR

2012-04-01

... PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Equipment and... dietary supplement, you must: (a) Design or select equipment to ensure that dietary supplement...

21 CFR 111.30 - What requirements apply to automated, mechanical, or electronic equipment?

Code of Federal Regulations, 2014 CFR

2014-04-01

... PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Equipment and... dietary supplement, you must: (a) Design or select equipment to ensure that dietary supplement...

40 CFR 1068.105 - What other provisions apply to me specifically if I manufacture equipment needing certified engines?

Code of Federal Regulations, 2010 CFR

2010-07-01

... inventory practice is to keep on hand a one-month supply of engines based on your upcoming production...) Send a request for duplicate labels in writing on your company's letterhead to the engine manufacturer. Include the following information in your request: (i) Identify the type of equipment and the specific...

East Europe Report.

DTIC Science & Technology

1986-12-05

and road building equipment manufactured by the Martin Heavy Engineering Plants, economic production unit [VHJ], one of our major suppliers, the...equipped with health care facilities, their major advantage is that they can be rapidly assembled and disassembled even under demanding field conditions... major crude oil pipelines. In the Seventh 5-Year Plan the Czechoslovak Freight Car Works, concern enterprise, in Poprad manufactured numerous BMPNS

40 CFR 1068.103 - What are the provisions related to the duration and applicability of certificates of conformity?

Code of Federal Regulations, 2010 CFR

2010-07-01

..., the production period is the manufacturer's annual production period identified as a model year. (1) For engines/equipment subject to emission standards based on model years, the first day of the annual... model year is named, or the earliest date of manufacture for any engine/equipment in the engine family...

Nonelectronic Parts Reliability Data 1991

DTIC Science & Technology

1991-05-01

E6) Page Electrical Filter, Micrwave ,Band Pass Com GB 13567-021 < 0.0377 0 26.5512 3-180 Electrical Filter,Micridave, High Pass Ccm GB 13567-021...device and equipment manufacturers , government laboratories and equipment users (government and industry). Automatic distribution lists, voluntary...information and data contained herein have been compiled from government and nongovernment technical reports and from material supplied by various manufacturers

Manufacturing Demonstration Facility: Roll-to-Roll Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Datskos, Panos G; Joshi, Pooran C; List III, Frederick Alyious

This Manufacturing Demonstration Facility (MDF)e roll-to-roll processing effort described in this report provided an excellent opportunity to investigate a number of advanced manufacturing approaches to achieve a path for low cost devices and sensors. Critical to this effort is the ability to deposit thin films at low temperatures using nanomaterials derived from nanofermentation. The overarching goal of this project was to develop roll-to-roll manufacturing processes of thin film deposition on low-cost flexible substrates for electronics and sensor applications. This project utilized ORNL s unique Pulse Thermal Processing (PTP) technologies coupled with non-vacuum low temperature deposition techniques, ORNL s clean roommore » facility, slot dye coating, drop casting, spin coating, screen printing and several other equipment including a Dimatix ink jet printer and a large-scale Kyocera ink jet printer. The roll-to-roll processing project had three main tasks: 1) develop and demonstrate zinc-Zn based opto-electronic sensors using low cost nanoparticulate structures manufactured in a related MDF Project using nanofermentation techniques, 2) evaluate the use of silver based conductive inks developed by project partner NovaCentrix for electronic device fabrication, and 3) demonstrate a suite of low cost printed sensors developed using non-vacuum deposition techniques which involved the integration of metal and semiconductor layers to establish a diverse sensor platform technology.« less

Measurement framework for product service system performance of generator set distributors

NASA Astrophysics Data System (ADS)

Sofianti, Tanika D.

2017-11-01

Selling Generator Set (Genset) in B2B market, distributors assisted manufacturers to sell products. This is caused by the limited resources owned by the manufacturer for adding service elements. These service elements are needed to enhance the competitiveness of the generator sets. Some genset distributors often sell products together with supports to their customers. Industrial distributor develops services to meet the needs of the customer. Generator set distributors support machines and equipment produced by manufacturer. The services delivered by the distributors could enhance value obtained by the customers from the equipment. Services provided to customers in bidding process, ordering process of the equipment from the manufacturer, equipment delivery, installations, and the after sales stage. This paper promotes framework to measure Product Service System (PSS) of Generator Set distributors in delivering their products and services for the customers. The methodology of conducting this research is by adopting the perspective of the providers and customers and by taking into account the tangible and intangible products. This research leads to the idea of improvement of current Product Service System of a Genset distributor. This research needs further studies in more detailed measures and the implementation of measurement tools.

An investigation into the feasibility of locating portable medical devices using radio frequency identification devices and technology.

PubMed

Britton, J

2007-01-01

Portable medical devices represent an important resource for assisting healthcare delivery. The movement of portable devices often results in them being unavailable when needed. Tracking equipment using radiofrequency identification technology/devices (RFID) may provide a promising solution to the problems encountered in locating portable equipment. An RFID technology trial was undertaken at Royal Alexandra Hospital, Paisley. This involved the temporary installation of three active readers and attaching actively transmitting radio frequency tags to different portable medical devices. The active readers and computer system were linked using a bespoke data network. Tags and readers from two separate manufacturers were tested. Reliability difficulties were encountered when testing the technology from the first manufacturer, probably due to the casing of the medical device interfering with the signal from the tag. Improved results were obtained when using equipment from the second manufacturer with an overall error rate of 12.3%. Tags from this manufacturer were specifically designed to overcome problems observed with the first system tested. Findings from this proof of concept trial suggest that RFID technology could be used to track the location of equipment in a hospital.

77 FR 26509 - Request for Information on Proposed New Program: National Network for Manufacturing Innovation...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

...): Refining standards, materials, and equipment for additive manufacturing to enable low- cost, low-volume...-01] Request for Information on Proposed New Program: National Network for Manufacturing Innovation...: Request for information. SUMMARY: The NIST-hosted Advanced Manufacturing National Program Office (AMNPO...

Ramp Technology and Intelligent Processing in Small Manufacturing

NASA Technical Reports Server (NTRS)

Rentz, Richard E.

1992-01-01

To address the issues of excessive inventories and increasing procurement lead times, the Navy is actively pursuing flexible computer integrated manufacturing (FCIM) technologies, integrated by communication networks to respond rapidly to its requirements for parts. The Rapid Acquisition of Manufactured Parts (RAMP) program, initiated in 1986, is an integral part of this effort. The RAMP program's goal is to reduce the current average production lead times experienced by the Navy's inventory control points by a factor of 90 percent. The manufacturing engineering component of the RAMP architecture utilizes an intelligent processing technology built around a knowledge-based shell provided by ICAD, Inc. Rules and data bases in the software simulate an expert manufacturing planner's knowledge of shop processes and equipment. This expert system can use Product Data Exchange using STEP (PDES) data to determine what features the required part has, what material is required to manufacture it, what machines and tools are needed, and how the part should be held (fixtured) for machining, among other factors. The program's rule base then indicates, for example, how to make each feature, in what order to make it, and to which machines on the shop floor the part should be routed for processing. This information becomes part of the shop work order. The process planning function under RAMP greatly reduces the time and effort required to complete a process plan. Since the PDES file that drives the intelligent processing is 100 percent complete and accurate to start with, the potential for costly errors is greatly diminished.

Ramp technology and intelligent processing in small manufacturing

NASA Astrophysics Data System (ADS)

Rentz, Richard E.

1992-04-01

To address the issues of excessive inventories and increasing procurement lead times, the Navy is actively pursuing flexible computer integrated manufacturing (FCIM) technologies, integrated by communication networks to respond rapidly to its requirements for parts. The Rapid Acquisition of Manufactured Parts (RAMP) program, initiated in 1986, is an integral part of this effort. The RAMP program's goal is to reduce the current average production lead times experienced by the Navy's inventory control points by a factor of 90 percent. The manufacturing engineering component of the RAMP architecture utilizes an intelligent processing technology built around a knowledge-based shell provided by ICAD, Inc. Rules and data bases in the software simulate an expert manufacturing planner's knowledge of shop processes and equipment. This expert system can use Product Data Exchange using STEP (PDES) data to determine what features the required part has, what material is required to manufacture it, what machines and tools are needed, and how the part should be held (fixtured) for machining, among other factors. The program's rule base then indicates, for example, how to make each feature, in what order to make it, and to which machines on the shop floor the part should be routed for processing. This information becomes part of the shop work order. The process planning function under RAMP greatly reduces the time and effort required to complete a process plan. Since the PDES file that drives the intelligent processing is 100 percent complete and accurate to start with, the potential for costly errors is greatly diminished.

Industrial waste water in Bangkok, Thailand: Definitional mission report. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pfrang, W.

A definitional mission visited Thailand between February 1 and 7, 1992 to study the market opportunities for US manufacturers in providing pollution control equipment. Thailand presently lacks industrial machinery required for pollution control equipment. Consequently, this equipment must be imported for both industrial and municipal waste treatment facilities. The US has both the applicable technology and manufactured goods to serve the market. There is, however, stiff competition from Europe and especially Japan, who offer financial assistance at preferential rates for these types of projects.

Waking the sleeping giant: Introducing new heat exchanger technology into the residential air-conditioning marketplace

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chapp, T.; Voss, M.; Stephens, C.

1998-07-01

The Air Conditioning Industry has made tremendous strides in improvements to the energy efficiency and reliability of its product offerings over the past 40 years. These improvement can be attributed to enhancements of components, optimization of the energy cycle, and modernized and refined manufacturing techniques. During this same period, energy consumption for space cooling has grown significantly. In January of 1992, the minimum efficiency requirement for central air conditioning equipment was raised to 10 SEER. This efficiency level is likely to increase further under the auspices of the National Appliance Energy Conservation Act (NAECA). A new type of heat exchangermore » was developed for air conditioning equipment by Modine Manufacturing Company in the early 1990's. Despite significant advantages in terms of energy efficiency, dehumidification, durability, and refrigerant charge there has been little interest expressed by the air conditioning industry. A cooperative effort between Modine, various utilities, and several state energy offices has been organized to test and demonstrate the viability of this heat exchanger design throughout the nation. This paper will review the fundamentals of heat exchanger design and document this simple, yet novel technology. These experiences involving equipment retrofits have been documented with respect to the performance potential of air conditioning system constructed with PF{trademark} Heat Exchangers (generically referred to as microchannel heat exchangers) from both an energy efficiency as well as a comfort perspective. The paper will also detail the current plan to introduce 16 to 24 systems into an extended field test throughout the US which commenced in the Fall of 1997.« less

Analysis and evaluation in the production process and equipment area of the low-cost solar array project

NASA Technical Reports Server (NTRS)

Goldman, H.; Wolf, M.

1979-01-01

The energy consumed in manufacturing silicon solar cell modules was calculated for the current process, as well as for 1982 and 1986 projected processes. In addition, energy payback times for the above three sequences are shown. The module manufacturing energy was partitioned two ways. In one way, the silicon reduction, silicon purification, sheet formation, cell fabrication, and encapsulation energies were found. In addition, the facility, equipment, processing material and direct material lost-in-process energies were appropriated in junction formation processes and full module manufacturing sequences. A brief methodology accounting for the energy of silicon wafers lost-in-processing during cell manufacturing is described.

21 CFR 211.65 - Equipment construction.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Equipment construction. 211.65 Section 211.65 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.65 Equipment...

47 CFR 95.1123 - Protection of medical equipment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Protection of medical equipment. 95.1123... SERVICES PERSONAL RADIO SERVICES Wireless Medical Telemetry Service (WMTS) General Provisions § 95.1123 Protection of medical equipment. The manufacturers, installers and users of WMTS equipment are cautioned that...

14 CFR 121.358 - Low-altitude windshear system equipment requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Low-altitude windshear system equipment... OPERATING REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.358 Low-altitude windshear system equipment requirements. (a) Airplanes manufactured after January...

14 CFR 121.358 - Low-altitude windshear system equipment requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Low-altitude windshear system equipment... OPERATING REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.358 Low-altitude windshear system equipment requirements. (a) Airplanes manufactured after January...

14 CFR 121.358 - Low-altitude windshear system equipment requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Low-altitude windshear system equipment... OPERATING REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.358 Low-altitude windshear system equipment requirements. (a) Airplanes manufactured after January...

14 CFR 121.358 - Low-altitude windshear system equipment requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Low-altitude windshear system equipment... OPERATING REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.358 Low-altitude windshear system equipment requirements. (a) Airplanes manufactured after January...

14 CFR 121.358 - Low-altitude windshear system equipment requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Low-altitude windshear system equipment... OPERATING REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.358 Low-altitude windshear system equipment requirements. (a) Airplanes manufactured after January...

78 FR 79401 - Export Trade Certificate of Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-30

... Power Equipment Institute, Inc. (Application no. 89- 5A018). SUMMARY: The U.S. Department of Commerce issued an amended Export Trade Certificate of Review to Outdoor Power Equipment Institute, Inc. (OPEI) on... Price Turf Equipment, Ingersoll Equipment Company, Kut-Kwick Corporation, Maxim Manufacturing...

Acquisition of equipment for composite manufacturing laboratory.

DOT National Transportation Integrated Search

2009-12-01

An interdisciplinary team of faculty was formed to upgrade the Composite Manufacturing and Testing Facilities at Missouri S&T. The Metering Unit is useful to manufacture composite pultruded parts using two part polyurethane resin system. Prior to the...

48 CFR 1819.1005 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Printed Circuit Assembly (Electronic Assembly) Manufacturing. 334613 Magnetic and Optical Recording Media... and Wireless Communication Equipment Manufacturing. 336415 Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing. 336419 Other Guided Missile and Space Vehicle Parts and...

48 CFR 1819.1005 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Printed Circuit Assembly (Electronic Assembly) Manufacturing. 334613 Magnetic and Optical Recording Media... and Wireless Communication Equipment Manufacturing. 336415 Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing. 336419 Other Guided Missile and Space Vehicle Parts and...

40 CFR 1054.626 - What special provisions apply to equipment imported under the Transition Program for Equipment...

Code of Federal Regulations, 2010 CFR

2010-07-01

... EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT Special Compliance Provisions § 1054... provisions of this section and send us an annual report, as follows: (1) Notify the Designated Compliance... and manufacturing equipment. Companies that import equipment into the United States without meeting...

EPRI steam turbine and generator NDE, life assessment, and maintenance workshop. [Electric Power Research Institute (EPRI), NonDestructive Evaluation (NDE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nottingham, L.D.; Sabourin, P.F.

1992-10-01

On July 16--19, 1991, the EPRI NDE Center hosted the second EPRI Steam Turbine and Generator NDE, Life Assessment and Maintenance Workshop. This workshop was co-sponsored by the Nuclear Power and the Generation and Storage Divisions of EPRI. Attendees represented all sectors of the industry including utilities, equipment manufacturers, forging suppliers, service organizations, government organizations, insurancecarriers, and consultants from the United States and abroad. Domestic utility presence was again strong, with 105 representatives from 44 utilities in attendance. Australia, Canada, England, Finland, France, Germany, Italy, Japan, Korea, New Zealand, Spain, Sweden and Switzerland were represented in the international contingent. Amore » key and integral part of the workshop was a vendor equipment fair, in which some 23 organizations displayed and demonstrated equipment and services that they offer. Formal presentation of 53 technical papers made up the technical portion of the agenda, which also included two breakout discussion sessions on topical subjects. To provide optimum opportunity for participants to hear all presentations on closely related topics, the sessions were set such that a NDE session ran parallel to the life assessment session. The first NDE session included turbine related topics while the first life assessment session addressed generator issues. The last sessions of the workshop were just reversed with turbine topics being addressed in the life assessment session while generator issues were presented in the NDE session. Presentations on maintenance topics and on monitoring and diagnostics topics were also presented in parallel sessions. These proceedings contain the texts of the papers presented at the workshop. Individual papers in indexed separately.« less

Equipment for Microgravity Research

NASA Technical Reports Server (NTRS)

Fountain, J. A.

1986-01-01

Illustrated catalog describes equipment and facilities available for experiments under low-gravity conditions. Catalog encourages scientific and commercial organizations to investigate benefits of conducting research and manufacturing activities in microgravity environment. Catalog covers equipment ranging from containers to spacecraft.

40 CFR 80.24 - Controls applicable to motor vehicle manufacturers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Controls applicable to motor vehicle manufacturers. 80.24 Section 80.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... applicable to motor vehicle manufacturers. (a) [Reserved] (b) The manufacturer of any motor vehicle equipped...

Research and Development Strategies in the Semiconductor Industry

NASA Astrophysics Data System (ADS)

Bowling, Allen

2003-03-01

In the 21st Century semiconductor industry, there is a critical balance between internally funded semiconductor research and development (R) and externally funded R. External R may include jointly-funded research collaborations/partnerships with other device manufacturers, jointly-funded consortia-based R, and individually-funded research programs at universities and other contract research locations. Each of these approaches has merits and each has costs. There is a critical balance between keeping the internal research and development pipeline filled and keeping it from being overspent. To meet both competitive schedule and cost goals, a semiconductor device manufacturer must decide on a model for selection of internal versus external R. Today, one of the most critical decisions is whether or not to do semiconductor research and development on 300 mm silicon wafers. Equipment suppliers are doing first development on 300 mm equipment. So, for the device manufacturer, there is a balance between the cost of doing development on 300 mm wafers and the development time schedule driven by equipment availability. In the face of these cost and schedule elements, device manufacturers are looking to consortia such as SEMATECH, SRC, and SRC MARCO for early development and screening of new materials and device structure approaches. This also causes much more close development collaboration between device manufacturer and equipment supplier. Many device manufacturers are also making use of direct contract research with universities and other contract-research organizations, such as IMEC, LETI, and other government-funded research organizations around the world. To get the most out of these external research interactions, the company must develop a strategy for management and technology integration of external R.

Circumstances of fatal lockout/tagout-related injuries in manufacturing.

PubMed

Bulzacchelli, Maria T; Vernick, Jon S; Sorock, Gary S; Webster, Daniel W; Lees, Peter S J

2008-10-01

Over the past few decades, hundreds of manufacturing workers have suffered fatal injuries while performing maintenance and servicing on machinery and equipment. Using lockout/tagout procedures could have prevented many of these deaths. A narrative text analysis of OSHA accident investigation report summaries was conducted to describe the circumstances of lockout/tagout-related fatalities occurring in the US manufacturing industry from 1984 to 1997. The most common mechanisms of injury were being caught in or between parts of equipment, electrocution, and being struck by or against objects. Typical scenarios included cleaning a mixer or blender, cleaning a conveyor, and installing or disassembling electrical equipment. Lockout procedures were not even attempted in the majority (at least 58.8%) of fatal incidents reviewed. Lockout/tagout-related fatalities occur under a wide range of circumstances. Enhanced training and equipment designs that facilitate lockout and minimize worker contact with machine parts may prevent many lockout/tagout-related injuries. Published 2008 Wiley-Liss, Inc.

33 CFR 104.260 - Security systems and equipment maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Security systems and equipment... systems and equipment maintenance. (a) Security systems and equipment must be in good working order and inspected, tested, calibrated and maintained according to the manufacturer's recommendation. (b) The results...

33 CFR 105.250 - Security systems and equipment maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... systems must be regularly tested in accordance with the manufacturers' recommendations; noted deficiencies... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Security systems and equipment... systems and equipment maintenance. (a) Security systems and equipment must be in good working order and...

19 CFR 10.84 - Automotive vehicles and articles for use as original equipment in the manufacture of automotive...

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Automotive vehicles and articles for use as original equipment in the manufacture of automotive vehicles. 10.84 Section 10.84 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC....

19 CFR 10.84 - Automotive vehicles and articles for use as original equipment in the manufacture of automotive...

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Automotive vehicles and articles for use as original equipment in the manufacture of automotive vehicles. 10.84 Section 10.84 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC....

19 CFR 10.84 - Automotive vehicles and articles for use as original equipment in the manufacture of automotive...

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Automotive vehicles and articles for use as original equipment in the manufacture of automotive vehicles. 10.84 Section 10.84 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC....

19 CFR 10.84 - Automotive vehicles and articles for use as original equipment in the manufacture of automotive...

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Automotive vehicles and articles for use as original equipment in the manufacture of automotive vehicles. 10.84 Section 10.84 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC....

Equipment failures and their contribution to industrial incidents and accidents in the manufacturing industry.

PubMed

Bourassa, Dominic; Gauthier, François; Abdul-Nour, Georges

2016-01-01

Accidental events in manufacturing industries can be caused by many factors, including work methods, lack of training, equipment design, maintenance and reliability. This study is aimed at determining the contribution of failures of commonly used industrial equipment, such as machines, tools and material handling equipment, to the chain of causality of industrial accidents and incidents. Based on a case study which aimed at the analysis of an existing pulp and paper company's accident database, this paper examines the number, type and gravity of the failures involved in these events and their causes. Results from this study show that equipment failures had a major effect on the number and severity of accidents accounted for in the database: 272 out of 773 accidental events were related to equipment failure, where 13 of them had direct human consequences. Failures that contributed directly or indirectly to these events are analyzed.

A DIY Ultrasonic Signal Generator for Sound Experiments

NASA Astrophysics Data System (ADS)

Riad, Ihab F.

2018-02-01

Many physics departments around the world have electronic and mechanical workshops attached to them that can help build experimental setups and instruments for research and the training of undergraduate students. The workshops are usually run by experienced technicians and equipped with expensive lathing, computer numerical control (CNC) machines, electric measuring instruments, and several other essential tools. However, in developing countries such as Sudan, the lack of qualified technicians and adequately equipped workshops hampers efforts by these departments to supplement their laboratories with the equipment they need. The only other option is to buy the needed equipment from specialized manufacturers. The latter option is not feasible for the departments in developing countries where funding for education and research is scarce and very limited and as equipment from these manufacturers is typically too expensive. These departments struggle significantly in equipping undergraduate teaching laboratories, and here we propose one way to address this.

Voice recognition software for clinical use.

PubMed

Korn, K

1998-11-01

The current generation voice recognition products truly offer the promise of voice recognition systems, that are financially and operationally acceptable for use in a health care facility. Although the initial capital outlay for the purchase of such equipment may be substantial, the long-term benefit is felt to outweigh the expense. The ability to utilize computer equipment for educational purposes and information management alone helps to rationalize the cost. In addition, it is important to remember that the Internet has become a substantial source of information which provides another functional use for this equipment. Although one can readily see the implication for such a program in clinical practice, other uses for the program should not be overlooked. Uses far beyond the writing of clinic notes and correspondence can be easily envisioned. Utilization of voice recognition software offers clinical practices the ability to produce quality printed records in a timely and cost-effective manner. After learning procedures for the selected product and appropriately formatting word processing software and printers, printed progress notes should be able to be produced in less time than traditional dictation and transcription methods. Although certain procedures and practices may need to be altered, or may preclude optimal utilization of this type of system, many advantages are apparent. It is recommended that facilities consider utilization of Voice Recognition products such as Dragon Systems Naturally Speaking Software, or at least consider a trial of this method with one of the limited-feature products, if current dictation practices are unsatisfactory or excessively costly. Free downloadable trial software or single user software can provide a reduced-cost method for trial evaluation of such products if a major commitment is not felt to be desired. A list of voice recognition software manufacturer web sites may be accessed through the following: http://www.dragonsys.com/ http://www.software.ibm/com/is/voicetype/ http://www.lhs.com/

[Plug-in Based Centralized Control System in Operating Rooms].

PubMed

Wang, Yunlong

2017-05-30

Centralized equipment controls in an operating room (OR) is crucial to an efficient workflow in the OR. To achieve centralized control, an integrative OR needs to focus on designing a control panel that can appropriately incorporate equipment from different manufactures with various connecting ports and controls. Here we propose to achieve equipment integration using plug-in modules. Each OR will be equipped with a dynamic plug-in control panel containing physically removable connecting ports. Matching outlets will be installed onto the control panels of each equipment used at any given time. This dynamic control panel will be backed with a database containing plug-in modules that can connect any two types of connecting ports common among medical equipment manufacturers. The correct connecting ports will be called using reflection dynamics. This database will be updated regularly to include new connecting ports on the market, making it easy to maintain, update, expand and remain relevant as new equipment are developed. Together, the physical panel and the database will achieve centralized equipment controls in the OR that can be easily adapted to any equipment in the OR.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, K.; Gonzales, J.

Many fleet managers have opted to incorporate alternative fuels and advanced vehicles into their lineup. Original equipment manufacturers (OEMs) offer a variety of choices, and there are additional options offered by aftermarket companies. There are also a myriad of ways that existing vehicles can be modified to utilize alternative fuels and other advanced technologies. Vehicle conversions and retrofit packages, along with engine repower options, can offer an ideal way to lower vehicle operating costs. This can result in long term return on investment, in addition to helping fleet managers achieve emissions and environmental goals. This report summarizes the various factorsmore » to consider when pursuing a conversion, retrofit, or repower option.« less

Study on system for extracted type infrared gas analysis

NASA Astrophysics Data System (ADS)

Gu, Ruirui; Yao, Jun; Li, Wei; Li, Wenzhong; Zhang, Shaohua; Liu, Zhe; Wen, Qiang

2015-12-01

Based on the Beer-Lambert law and the characteristic IR absorption spectrum of CO, a system for extracted type infrared gas analysis has been designed and manufactured, which utilizes different absorptive degrees infrared light gain under different concentration degrees of the gas to be measured to the value of detect CO concentration, including optical path, electric circuit and gas path. A forward and backward gas detection chamber equipped with a micro flow sensor has been used in the optical path as well as a multistage high precision amplifier and filter circuit has been used in the electric circuit. The experimental results accord with the testing standard.

40 CFR Table 3 to Subpart Hhhhh of... - Requirements for Equipment Leaks

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 13 2010-07-01 2010-07-01 false Requirements for Equipment Leaks 3... Manufacturing Pt. 63, Subpt. HHHHH, Table 3 Table 3 to Subpart HHHHH of Part 63—Requirements for Equipment Leaks... equipment leaks. For all . . . You must . . . 1. Equipment that is in organic HAP service at an existing...

21 CFR 211.63 - Equipment design, size, and location.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Equipment design, size, and location. 211.63 Section 211.63 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES....63 Equipment design, size, and location. Equipment used in the manufacture, processing, packing, or...

21 CFR 211.63 - Equipment design, size, and location.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Equipment design, size, and location. 211.63 Section 211.63 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES....63 Equipment design, size, and location. Equipment used in the manufacture, processing, packing, or...

21 CFR 211.63 - Equipment design, size, and location.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment design, size, and location. 211.63 Section 211.63 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES....63 Equipment design, size, and location. Equipment used in the manufacture, processing, packing, or...

21 CFR 211.63 - Equipment design, size, and location.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Equipment design, size, and location. 211.63 Section 211.63 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES....63 Equipment design, size, and location. Equipment used in the manufacture, processing, packing, or...

21 CFR 211.63 - Equipment design, size, and location.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Equipment design, size, and location. 211.63 Section 211.63 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES....63 Equipment design, size, and location. Equipment used in the manufacture, processing, packing, or...

78 FR 24428 - P25 Compliance Assessment Program for Communications Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-25

... Communications Equipment AGENCY: Science and Technology Directorate, Department of Homeland Security. ACTION... for ensuring that communications equipment that is declared by the manufacturer to be P25 compliant in... developed by DHS and the National Institute of Standards and Technology (NIST) to identify equipment that...

Spray-congealed microparticles for drug delivery - an overview of factors influencing their production and characteristics.

PubMed

Oh, Ching Mien; Guo, Qiyun; Wan Sia Heng, Paul; Chan, Lai Wah

2014-07-01

In any manufacturing process, the success of producing an end product with the desired properties and yield depends on a range of factors that include the equipment, process and formulation variables. It is the interest of manufacturers and researchers to understand each manufacturing process better and ascertain the effects of various manufacturing-associated factors on the properties of the end product. Unless the manufacturing process is well understood, it would be difficult to set realistic limits for the process variables and raw material specifications to ensure consistently high-quality and reproducible end products. Over the years, spray congealing has been used to produce particulates by the food and pharmaceutical industries. The latter have used this technology to develop specialized drug delivery systems. In this review, basic principles as well as advantages and disadvantages of the spray congealing process will be covered. Recent developments in spray congealing equipment, process variables and formulation variables such as the matrix material, encapsulated material and additives will also be discussed. Innovative equipment designs and formulations for spray congealing have emerged. Judicious choice of atomizers, polymers and additives is the key to achieve the desired properties of the microparticles for drug delivery.

Intelligent Processing Equipment Projects at DLA

NASA Technical Reports Server (NTRS)

Obrien, Donald F.

1992-01-01

The Defense Logistics Agency is successfully incorporating Intelligent Processing Equipment (IPE) into each of its Manufacturing Technology thrust areas. Several IPE applications are addressed in the manufacturing of two 'soldier support' items: combat rations and military apparel. In combat rations, in-line sensors for food processing are being developed or modified from other industries. In addition, many process controls are being automated to achieve better quality and to gain higher use (soldier) acceptance. IPE applications in military apparel include: in-process quality controls for identification of sewing defects, use of robots in the manufacture of shirt collars, and automated handling of garments for pressing.

Intelligent processing equipment projects at DLA

NASA Astrophysics Data System (ADS)

Obrien, Donald F.

1992-04-01

The Defense Logistics Agency is successfully incorporating Intelligent Processing Equipment (IPE) into each of its Manufacturing Technology thrust areas. Several IPE applications are addressed in the manufacturing of two 'soldier support' items: combat rations and military apparel. In combat rations, in-line sensors for food processing are being developed or modified from other industries. In addition, many process controls are being automated to achieve better quality and to gain higher use (soldier) acceptance. IPE applications in military apparel include: in-process quality controls for identification of sewing defects, use of robots in the manufacture of shirt collars, and automated handling of garments for pressing.

Automotive Manufacturing Processes. Volume II - Manufacturing Processes for Passive Restraint Systems

DOT National Transportation Integrated Search

1981-02-01

Extensive material substitution and resizing of the domestic automotive fleet, as well as the introduction of new technologies, will require major changes in the techniques and equipment used in the various manufacturing processes employed in the pro...

26 CFR 1.460-2 - Long-term manufacturing contracts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... time normally required to design and manufacture the first unit of an item for which the taxpayer... manufacture a new type of industrial equipment. C reasonably expects the normal production period for this... 26 Internal Revenue 6 2010-04-01 2010-04-01 false Long-term manufacturing contracts. 1.460-2...

76 FR 2941 - Bureau of Political-Military Affairs: Directorate of Defense Trade Controls; Notifications to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-18

... services to support the design, manufacture and delivery of the Anik G1 Commercial Communication Satellite... proposed manufacturing license agreement for the manufacture of major defense equipment abroad. The... technical data, and defense services, to Germany for the design, manufacture, market and sale of High-G...

The Current State of Sensing, Health Management, and Control for Small-To-Medium-Sized Manufacturers

PubMed Central

Helu, Moneer; Weiss, Brian

2017-01-01

The development of digital technologies for manufacturing has been challenged by the difficulty of navigating the breadth of new technologies available to industry. This difficulty is compounded by technologies developed without a good understanding of the capabilities and limitations of the manufacturing environment, especially within small-to-medium enterprises (SMEs). This paper describes industrial case studies conducted to identify the needs, priorities, and constraints of manufacturing SMEs in the areas of performance measurement, condition monitoring, diagnosis, and prognosis. These case studies focused on contract and original equipment manufacturers with less than 500 employees from several industrial sectors. Solution and equipment providers and National Institute of Standards and Technology (NIST) Hollings Manufacturing Extension Partnership (MEP) centers were also included. Each case study involved discussions with key shop-floor personnel as well as site visits with some participants. The case studies highlight SME's strong need for access to appropriate data to better understand and plan manufacturing operations. They also help define industrially-relevant use cases in several areas of manufacturing operations, including scheduling support, maintenance planning, resource budgeting, and workforce augmentation. PMID:28736773

MANUFACTURING METHODS FOR PHASE SHIFTERS.

DTIC Science & Technology

MANUFACTURING), (*PHASE SHIFT CIRCUITS, FERRITES, GARNET , DIGITAL SYSTEMS, X BAND, C BAND, S BAND, RADAR EQUIPMENT, MAGNETIC MATERIALS, YTTRIUM COMPOUNDS, GADOLINIUM COMPOUNDS, ALUMINUM COMPOUNDS, IRON COMPOUNDS, OXIDES.

Scientific and technical collaboration between Russian and Ukranian researchers and manufacturers on the development of astronomical instruments equipped with advanced detection services

NASA Astrophysics Data System (ADS)

Vishnevsky, G. I.; Galyatkin, I. A.; Zhuk, A. A.; Iblyaminova, A. F.; Kossov, V. G.; Levko, G. V.; Nesterov, V. K.; Rivkind, V. L.; Rogalev, Yu. N.; Smirnov, A. V.; Gumerov, R. I.; Bikmaev, I. F.; Pinigin, G. I.; Shulga, A. V.; Kovalchyk, A. V.; Protsyuk, Yu. I.; Malevinsky, S. V.; Abrosimov, V. M.; Mironenko, V. N.; Savchenko, V. V.; Ivaschenko, Yu. N.; Andruk, V. M.; Dalinenko, I. N.; Vydrevich, M. G.

2003-01-01

The paper presents the possibilities and a list of tasks that are solved by collaboration between research and production companies, and astronomical observatories of Russia and Ukraine in the field of development, modernization and equipping of various telescopes (the AMC, RTT-150, Zeiss-600 and quantum-optical system Sazhen-S types) with advanced charge-coupled device (CCD) cameras. CCD imagers and ditital CCD cameras designed and manufactured by the "Electron-Optronic" Research & Production Company, St Petersburg, to equip astronomical telescopes and scientific instruments are described.

Efficiency improvements in US Office equipment: Expected policy impacts and uncertainties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koomey, J.G.; Cramer, M.; Piette, M.A.

This report describes a detailed end-use forecast of office equipment energy use for the US commercial sector. We explore the likely impacts of the US Environmental Protection Agency`s ENERGY STAR office equipment program and the potential impacts of advanced technologies. The ENERGY STAR program encourages manufacturers to voluntarily incorporate power saving features into personal computers, monitors, printers, copiers, and fax machines in exchange for allowing manufacturers to use the EPA ENERGY STAR logo in their advertising campaigns. The Advanced technology case assumes that the most energy efficient current technologies are implemented regardless of cost.

Quality assurance program guidelines for application to and use by manufacturers of rail/guideway vehicles, buses, automatic train control systems, and their major subsystems

NASA Technical Reports Server (NTRS)

Witkin, S. A.

1976-01-01

Guidelines are presented for a quality assurance system to be implemented by the manufacturer in support of designing, developing, fabricating, assembling, inspecting, testing, handling, and delivery of equipment being procured for use in public urban mass transit systems. The guidelines apply to this equipment when being procured for: (1) use in revenue service; (2) demonstration of systems that will be revenue producing or used by the public; (3) use as a prototype for follow-on operational/revenue producing equipment procurements; and (4) qualification tests.

NEMA wire and cable standards development programs

NASA Astrophysics Data System (ADS)

Baird, Robert W.

1994-01-01

The National Electrical Manufacturers Association (NEMA) is the nation's largest trade association for manufacturers of electrical equipment. Its member companies produce components, end-use equipment and systems for the generation, transmission, distribution, control and use of electricity. The wire and cable division is presented in 6 sections: building wire and cable, fabricated conductors, flexible cords, high performance wire and cable, magnet wire, and power and control cable. Participating companies are listed.

21 CFR 111.365 - What precautions must you take to prevent contamination?

Code of Federal Regulations, 2011 CFR

2011-04-01

... HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN... necessary, the phase of manufacturing; and (k) Identifying all processing lines and major equipment used... specific batch or lot number and, when necessary, the phase of manufacturing. ...

49 CFR 583.7 - Procedure for determining major foreign sources of passenger motor vehicle equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... passenger motor vehicle equipment. 583.7 Section 583.7 Transportation Other Regulations Relating to... passenger motor vehicle equipment. (a) Each manufacturer, except as specified in § 583.5(f) and (g), shall determine the countries, if any, which are major foreign sources of passenger motor vehicle equipment and...

40 CFR 63.2480 - What requirements must I meet for equipment leaks?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Manufacturing Emission Limits, Work Practice Standards, and Compliance Requirements § 63.2480 What requirements... reconfiguration of an equipment train if flexible hose connections are the only disturbed equipment. (3) For an... accordance with § 65.117(b) is not required after reconfiguration of an equipment train if flexible hose...

40 CFR 63.5734 - What standards must I meet for resin and gel coat application equipment cleaning operations?

Code of Federal Regulations, 2010 CFR

2010-07-01

...? (a) For routine flushing of resin and gel coat application equipment (e.g., spray guns, flowcoaters... and gel coat application equipment cleaning operations? 63.5734 Section 63.5734 Protection of... Pollutants for Boat Manufacturing Standards for Resin and Gel Coat Application Equipment Cleaning Operations...

A Handbook for Public Playground Safety. Volume II: Technical Guidelines for Equipment and Surfacing.

ERIC Educational Resources Information Center

Consumer Product Safety Commission, Washington, DC.

This handbook suggests safety guidelines for public playground equipment and describes various surfaces used under the equipment and possible injuries resulting from falls. The handbook is intended for use mainly by manufacturers, installers, school and park officials, and others interested in technical criteria for public playground equipment.…

40 CFR 60.4231 - What emission standards must I meet if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2010 CFR

2010-07-01

... I am a manufacturer of stationary SI internal combustion engines or equipment containing such... Stationary Spark Ignition Internal Combustion Engines Emission Standards for Manufacturers § 60.4231 What emission standards must I meet if I am a manufacturer of stationary SI internal combustion engines or...

40 CFR 60.4238 - What are my compliance requirements if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2011 CFR

2011-07-01

... I am a manufacturer of stationary SI internal combustion engines â¤19 KW (25 HP) or a manufacturer... Standards of Performance for Stationary Spark Ignition Internal Combustion Engines Compliance Requirements... SI internal combustion engines ≤19 KW (25 HP) or a manufacturer of equipment containing such engines...

40 CFR 60.4231 - What emission standards must I meet if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2012 CFR

2012-07-01

... I am a manufacturer of stationary SI internal combustion engines or equipment containing such... Stationary Spark Ignition Internal Combustion Engines Emission Standards for Manufacturers § 60.4231 What emission standards must I meet if I am a manufacturer of stationary SI internal combustion engines or...

40 CFR 60.4231 - What emission standards must I meet if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2014 CFR

2014-07-01

... I am a manufacturer of stationary SI internal combustion engines or equipment containing such... Stationary Spark Ignition Internal Combustion Engines Emission Standards for Manufacturers § 60.4231 What emission standards must I meet if I am a manufacturer of stationary SI internal combustion engines or...

40 CFR 60.4238 - What are my compliance requirements if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2012 CFR

2012-07-01

... I am a manufacturer of stationary SI internal combustion engines â¤19 KW (25 HP) or a manufacturer... Standards of Performance for Stationary Spark Ignition Internal Combustion Engines Compliance Requirements... SI internal combustion engines ≤19 KW (25 HP) or a manufacturer of equipment containing such engines...

40 CFR 60.4231 - What emission standards must I meet if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2011 CFR

2011-07-01

... I am a manufacturer of stationary SI internal combustion engines or equipment containing such... Stationary Spark Ignition Internal Combustion Engines Emission Standards for Manufacturers § 60.4231 What emission standards must I meet if I am a manufacturer of stationary SI internal combustion engines or...

40 CFR 60.4238 - What are my compliance requirements if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2014 CFR

2014-07-01

... I am a manufacturer of stationary SI internal combustion engines â¤19 KW (25 HP) or a manufacturer... Standards of Performance for Stationary Spark Ignition Internal Combustion Engines Compliance Requirements... SI internal combustion engines ≤19 KW (25 HP) or a manufacturer of equipment containing such engines...

40 CFR 60.4231 - What emission standards must I meet if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2013 CFR

2013-07-01

... I am a manufacturer of stationary SI internal combustion engines or equipment containing such... Stationary Spark Ignition Internal Combustion Engines Emission Standards for Manufacturers § 60.4231 What emission standards must I meet if I am a manufacturer of stationary SI internal combustion engines or...

40 CFR 60.4238 - What are my compliance requirements if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2013 CFR

2013-07-01

... I am a manufacturer of stationary SI internal combustion engines â¤19 KW (25 HP) or a manufacturer... Standards of Performance for Stationary Spark Ignition Internal Combustion Engines Compliance Requirements... SI internal combustion engines ≤19 KW (25 HP) or a manufacturer of equipment containing such engines...

40 CFR 60.4238 - What are my compliance requirements if I am a manufacturer of stationary SI internal combustion...

Code of Federal Regulations, 2010 CFR

2010-07-01

... I am a manufacturer of stationary SI internal combustion engines â¤19 KW (25 HP) or a manufacturer... Standards of Performance for Stationary Spark Ignition Internal Combustion Engines Compliance Requirements... SI internal combustion engines ≤19 KW (25 HP) or a manufacturer of equipment containing such engines...

Analysis of the economic and ecological performances in the transient regimes of the European driving cycle for a midsize SUV equipped with a DHEP, using the simulation platforms

NASA Astrophysics Data System (ADS)

Bancă, Gheorghe; Ivan, Florian; Iozsa, Daniel; Nisulescu, Valentin

2017-10-01

Currently, the tendency of the car manufacturers is to continue the expansion of the global production of SUVs (Sport Utility Vehicle), while observing the requirements imposed by the new pollution standards by developing new technologies like DHEP (Diesel Hybrid Electric Powertrain). Experience has shown that the transient regimes are the most difficult to control from an economic and ecological perspective. As a result, this paper will highlight the behaviour of such engines that are provided in a middle class SUV (Sport Utility Vehicle), which operates in such states. We selected the transient regimes characteristic to the NMVEG (New Motor Vehicle Emissions Group) cycle. The investigations using the modelling platform AMESim allowed for rigorous interpretations for the 16 acceleration and 18 deceleration states. The results obtained from the simulation will be validated by experiments.

Assessment of materials commonly utilized in health care: implications for bacterial survival and transmission.

PubMed

Lankford, Mary G; Collins, Susan; Youngberg, Larry; Rooney, Denise M; Warren, John R; Noskin, Gary A

2006-06-01

Contaminated environmental surfaces, equipment, and health care workers' hands have been linked to outbreaks of infection or colonization because of vancomycin-resistant enterococci (VRE) and Pseudomonas aeruginosa (PSAE). Upholstery, walls, and flooring may enhance bacterial survival, providing infectious reservoirs. Investigate recovery of VRE and PSAE, determine efficacy of disinfection, and evaluate VRE transmission from surfaces. Upholstery, flooring, and wall coverings were inoculated with VRE and PSAE and assessed for recovery at 24 hours, 72 hours, and 7 days. Inoculated surfaces were cleaned utilizing manufacturers' recommendations of natural, commercial, or hospital-approved products and methods, and samples were obtained. To assess potential for transmission, volunteers touched VRE-inoculated surfaces and imprinted palms onto contact-impression plates. Twenty-four hours following inoculation, all surfaces had recovery of VRE; 13 (92.9%) of 14 surfaces had persistent PSAE. After cleaning, VRE was recovered from 7 (50%) surfaces, PSAE from 5 (35.7%) surfaces. After inoculation followed by palmar contact, VRE was recovered from all surfaces touched. Bacteria commonly encountered in hospitals are capable of prolonged survival and may promote cross transmission. Selection of surfaces for health care environments should include product application and complexity of manufacturers' recommendations for disinfection. Recovery of organisms on surfaces and hands emphasizes importance of hand hygiene compliance prior to patient contact.

Guide to Scientific Instruments

ERIC Educational Resources Information Center

Sommer, Richard G.; Scherago, Earl J.

1977-01-01

Provides a list of scientific laboratory instruments and equipment and the names and addresses of their manufacturers. Instruments appear in alphabetical order with the names of manufactures listed below each. (SL)

Silver-free Metallization Technology for Producing High Efficiency, Industrial Silicon Solar Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michaelson, Lynne M.; Munoz, Krystal; Karas, Joseph

The goal of this project is to provide a commercially viable Ag-free metallization technology that will both reduce cost and increase efficiency of standard silicon solar cells. By removing silver from the front grid metallization and replacing it with lower cost nickel, copper, and tin metal, the front grid direct materials costs will decrease. This reduction in material costs should provide a path to meeting the Sunshot 2020 goal of 1 dollar / W DC. As of today, plated contacts are not widely implemented in large scale manufacturing. For organizations that wish to implement pilot scale manufacturing, only two equipmentmore » choices exist. These equipment manufacturers do not supply plating chemistry. The main goal of this project is to provide a chemistry and equipment solution to the industry that enables reliable manufacturing of plated contacts marked by passing reliability results and higher efficiencies than silver paste front grid contacts. To date, there have been several key findings that point to plated contacts performing equal to or better than the current state of the art silver paste contacts. Poor adhesion and reliability concerns are a few of the hurdles for plated contacts, specifically plated nickel directly on silicon. A key finding of the Phase 1 budget period is that the plated contacts have the same adhesion as the silver paste controls. This is a huge win for plated contacts. With very little optimization work, state of the art electrical results for plated contacts on laser ablated lines have been demonstrated with efficiencies up to 19.1% and fill factors ~80% on grid lines 40-50 um wide. The silver paste controls with similar line widths demonstrate similar electrical results. By optimizing the emitter and grid design for the plated contacts, it is expected that the electrical performance will exceed the silver paste controls. In addition, cells plated using Technic chemistry and equipment pass reliability testing; i.e. 1000 hours damp heat and 200 thermal cycles, with results similar to silver paste control cells. 100 cells have been processed through Technic’s novel demo plating tool built and installed during budget period 2. This plating tool performed consistently from cell to cell, providing gentle handling for the solar cells. An agreement has been signed with a cell manufacturer to process their cells through our plating chemistry and equipment. Their main focus for plated contacts is to reduce the direct materials cost by utilizing nickel, copper, and tin in place of silver paste. Based on current market conditions and cost model calculations, the overall savings offered by plated contacts is only 3.5% dollar/W versus silver paste contacts; however, the direct materials savings depend on the silver market. If silver prices increase, plated contacts may find a wider adoption in the solar industry in order to keep the direct materials costs down for front grid contacts.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bahder, G.; Bopp, L.A.; Eager, G.S.

This report covers the continuation of the work to develop technology to manufacture chemically crosslinked polyethylene insulated power cables in the ac voltage range of 138 kV to 345 kV having insulation thicknesses approximately equal to that of oil impregnated paper insulated cables. It also incorporates the development of field molded splices and terminations for new high voltage stress 138 kV cables. After reviewing the main equipment elements, incorporated in the pilot extrusion line, the special features of this system are noted and a step-by-step description of the cable extrusion process is given. Optimization of the process and introduction ofmore » modifications in the equipment culminated with the production of 138 kV cables. Results of laboratory tests to demonstrate the high quality of the cables are given. The development of molded splices and molded stress control cones was initiated with the work on model cables and followed by the making of splices and terminations on 138 kV cables. The molded components are made with the same purified insulating compound as used in the manufacture of the cables. Both the molded splices and the molded stress control cones have been fully tested in the laboratory. Following the completion of the development of the 138 kV cable a high stress 230 kV crosslinked polyethylene cable was developed and optimized. A full evaluation program similar to the one utilized on the 138 kV cable was carried out. Subsequently, work to develop a 345 kV high voltage stress cable, having insulation thickness of 1.02'' was undertaken. 345 kV cables were successfully manufactured and tested. However, additional work is required to further optimize the quality of this cable.« less

The Importance of Play: Part Two

ERIC Educational Resources Information Center

Exceptional Parent, 2008

2008-01-01

The International Playground Equipment Manufacturers Association (IPEMA) is a non-profit membership association of playground equipment and surfacing companies. IPEMA's primary mission is to provide playground equipment and surfacing with independently tested safety certification to meet American Society for Testing and Materials (ASTM) standards…

Additive Manufacturing of Thermoplastic Matrix Composites Using Ultrasonics

NASA Astrophysics Data System (ADS)

Olson, Meghan

Advanced composite materials have great potential for facilitating energy efficient product design and their manufacture if improvements are made to current composite manufacturing processes. This thesis focuses on the development of a novel manufacturing process for thermoplastic composite structures entitled Laser-Ultrasonic Additive Manufacturing ('LUAM'), which is intended to combine the benefits of laser processing technology, developed by Automated Dynamics Inc., with ultrasonic bonding technology that is used commercially for unreinforced polymers. These technologies used together have the potential to significantly reduce the energy consumption and void content of thermoplastic composites made using Automated Fiber Placement (AFP). To develop LUAM in a methodical manner with minimal risk, a staged approach was devised whereby coupon-level mechanical testing and prototyping utilizing existing equipment was accomplished. Four key tasks have been identified for this effort: Benchmarking, Ultrasonic Compaction, Laser Assisted Ultrasonic Compaction, and Demonstration and Characterization of LUAM. This thesis specifically addresses Tasks 1 and 2, i.e. Benchmarking and Ultrasonic Compaction, respectively. Task 1, fabricating test specimens using two traditional processes (autoclave and thermal press) and testing structural performance and dimensional accuracy, provide results of a benchmarking study by which the performance of all future phases will be gauged. Task 2, fabricating test specimens using a non-traditional process (ultrasonic conpaction) and evaluating in a similar fashion, explores the the role of ultrasonic processing parameters using three different thermoplastic composite materials. Further development of LUAM, although beyond the scope of this thesis, will combine laser and ultrasonic technology and eventually demonstrate a working system.

A new large-scale manufacturing platform for complex biopharmaceuticals.

PubMed

Vogel, Jens H; Nguyen, Huong; Giovannini, Roberto; Ignowski, Jolene; Garger, Steve; Salgotra, Anil; Tom, Jennifer

2012-12-01

Complex biopharmaceuticals, such as recombinant blood coagulation factors, are addressing critical medical needs and represent a growing multibillion-dollar market. For commercial manufacturing of such, sometimes inherently unstable, molecules it is important to minimize product residence time in non-ideal milieu in order to obtain acceptable yields and consistently high product quality. Continuous perfusion cell culture allows minimization of residence time in the bioreactor, but also brings unique challenges in product recovery, which requires innovative solutions. In order to maximize yield, process efficiency, facility and equipment utilization, we have developed, scaled-up and successfully implemented a new integrated manufacturing platform in commercial scale. This platform consists of a (semi-)continuous cell separation process based on a disposable flow path and integrated with the upstream perfusion operation, followed by membrane chromatography on large-scale adsorber capsules in rapid cycling mode. Implementation of the platform at commercial scale for a new product candidate led to a yield improvement of 40% compared to the conventional process technology, while product quality has been shown to be more consistently high. Over 1,000,000 L of cell culture harvest have been processed with 100% success rate to date, demonstrating the robustness of the new platform process in GMP manufacturing. While membrane chromatography is well established for polishing in flow-through mode, this is its first commercial-scale application for bind/elute chromatography in the biopharmaceutical industry and demonstrates its potential in particular for manufacturing of potent, low-dose biopharmaceuticals. Copyright © 2012 Wiley Periodicals, Inc.

Evaluation of reformulated thermal control coatings in a simulated space environment. Part 1: YB-71

NASA Technical Reports Server (NTRS)

Cerbus, Clifford A.; Carlin, Patrick S.

1994-01-01

The Air Force Space and Missile Systems Center and Wright Laboratory Materials Directorate (WL/ML) have sponsored and effort to effort to reformulate and qualify Illinois Institute of Technology Research Institute (IITRI) spacecraft thermal control coatings. S13G/LO-1, Z93, and YB-71 coatings were reformulated because the potassium silicate binder, Sylvania PS-7, used in the coatings is no longer manufactured. Coatings utilizing the binder's replacement candidate, Kasil 2130, manufactured by The Philadelphia Quartz (PQ) Corporation, Baltimore, Maryland, and undergoing testing at the Materials Directorate's Space Combined Effects Primary Test and Research Equipment (SCEPTRE) Facility operated by the University of Dayton Research Institute (UDRI). The simulated space environment consists of combined ultraviolet (UV) and electron exposure with in site specimen reflectance measurements. A brief description of the effort at IITRI, results and discussion from testing the reformulated YB-71 coating in SCEPTRE, and plans for further testing of reformulated Z93 and S13G/LO-1 are presented.

Predictive models of lyophilization process for development, scale-up/tech transfer and manufacturing.

PubMed

Zhu, Tong; Moussa, Ehab M; Witting, Madeleine; Zhou, Deliang; Sinha, Kushal; Hirth, Mario; Gastens, Martin; Shang, Sherwin; Nere, Nandkishor; Somashekar, Shubha Chetan; Alexeenko, Alina; Jameel, Feroz

2018-07-01

Scale-up and technology transfer of lyophilization processes remains a challenge that requires thorough characterization of the laboratory and larger scale lyophilizers. In this study, computational fluid dynamics (CFD) was employed to develop computer-based models of both laboratory and manufacturing scale lyophilizers in order to understand the differences in equipment performance arising from distinct designs. CFD coupled with steady state heat and mass transfer modeling of the vial were then utilized to study and predict independent variables such as shelf temperature and chamber pressure, and response variables such as product resistance, product temperature and primary drying time for a given formulation. The models were then verified experimentally for the different lyophilizers. Additionally, the models were applied to create and evaluate a design space for a lyophilized product in order to provide justification for the flexibility to operate within a certain range of process parameters without the need for validation. Published by Elsevier B.V.

77 FR 14569 - Notice of Intent To Grant Exclusive License

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-12

... Direct Chip Attach Packaging Methodologies and Apparatuses for Harsh Environments, LEW 17,256-1, to... equipment; semiconductor manufacturing; material manufacturing such as metallurgy, refractory processes, and...

Initiatives to Improve Quality of Additively Manufactured Parts

NASA Technical Reports Server (NTRS)

Waller, Jess; Nichols, Charles

2017-01-01

NASA is providing leadership in an international effort linking government and industry resources to speed adoption of additive manufactured (AM) parts. Participants include government agencies (NASA, USAF, NIST, FAA), industry (commercial aerospace, NDE manufacturers, AM equipment manufacturers), standards organizations and academia. NASA is also partnering with its international space exploration organizations such as ESA and JAXA. NDT is identified as a universal need for all aspects of additive manufacturing.

75 FR 74773 - Mandatory Reporting of Greenhouse Gases: Additional Sources of Fluorinated GHGs

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-01

..., Methods for Estimating Air Emissions from Chemical Manufacturing Facilities; Protocol for Equipment Leak... chemical vapor deposition process (CVD) or other manufacturing processes use N 2 O. Production processes.... N 2 O emissions from chemical vapor deposition and other electronics manufacturing processes...

WASTE MINIMIZATION ASSESSMENT FOR A MANUFACTURER OF CAN-MANUFACTURING EQUIPMENT

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small- and medium-size manufacturers who want to minimize their generation of hazardous waste but who lack the expertise to do so. aste Minimization Assessment Centers (WMACs) were established at ...

Greening up Auto Part Manufacturing: A Collaboration between Academia and Industry

ERIC Educational Resources Information Center

Kneas, Kristi A.; Armstrong, Drew L.; Brank, Alice R.; Johnson, Amanda L.; Kissinger, Chelsea A.; Mabe, Adam R.; Sezer, Ozge; Fontinell, Mike

2009-01-01

Historically, manufacture of automotive electronic components and screen-printing of automotive instrument clusters at DENSO Manufacturing Tennessee, Inc. required washing of equipment such as screens, stencils, and jigs with sizable quantities of volatile organic compounds and hazardous air pollutants. Collaborative efforts between the Maryville…

Manufacturing, Marketing and Distribution, Business and Office Occupations: Grade 8. Cluster III.

ERIC Educational Resources Information Center

Calhoun, Olivia H.

A curriculum guide for grade 8, the document is divided into eleven units: marketing and distribution; food manufacturing; data processing and automation; administration, management, and labor; secretarial and clerical services; office machines; equipment; metal manufacturing and processing; prefabrication and prepackaging; textile and clothing…

Cost of ownership for inspection equipment

NASA Astrophysics Data System (ADS)

Dance, Daren L.; Bryson, Phil

1993-08-01

Cost of Ownership (CoO) models are increasingly a part of the semiconductor equipment evaluation and selection process. These models enable semiconductor manufacturers and equipment suppliers to quantify a system in terms of dollars per wafer. Because of the complex nature of the semiconductor manufacturing process, there are several key attributes that must be considered in order to accurately reflect the true 'cost of ownership'. While most CoO work to date has been applied to production equipment, the need to understand cost of ownership for inspection and metrology equipment presents unique challenges. Critical parameters such as detection sensitivity as a function of size and type of defect are not included in current CoO models yet are, without question, major factors in the technical evaluation process and life-cycle cost. This paper illustrates the relationship between these parameters, as components of the alpha and beta risk, and cost of ownership.

NASA Shuttle Logistics Depot (NSLD) - The application of ATE

NASA Technical Reports Server (NTRS)

Simpkins, Lorenz G.; Jenkins, Henry C.; Mauceri, A. Jack

1990-01-01

The concept of the NASA Shuttle Logistics Depot (NSLD) developed for the Space Shuttle Orbiter Program is described. The function of the NSLD at Cape Canaveral is to perform the acceptance and diagnostic testing of the Shuttle's space-rated line-replaceable units and shop-replaceable units (SRUs). The NSLD includes a comprehensive electronic automatic test station, program development stations, and assorted manufacturing support equipment (including thermal and vibration test equipment, special test equipment, and a card SRU test system). The depot activities also include the establishment of the functions for manufacturing of mechanical parts, soldering, welding, painting, clean room operation, procurement, and subcontract management.

46 CFR 160.073-5 - Certification.

Code of Federal Regulations, 2011 CFR

2011-10-01

... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Float-Free Link or Life Floats and Buoyant Apparatus § 160.073-5... COMDTINST M16714.3 (Series), “Equipment Lists,” the manufacturer must send a letter requesting the listing...

33 CFR 106.255 - Security systems and equipment maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... maintained according to manufacturers' recommendations. (b) Security systems must be regularly tested in... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Security systems and equipment... Shelf (OCS) Facility Security Requirements § 106.255 Security systems and equipment maintenance. (a...

40 CFR 1068.225 - What are the provisions for exempting engines/equipment for national security?

Code of Federal Regulations, 2010 CFR

2010-07-01

... engines/equipment for national security? 1068.225 Section 1068.225 Protection of Environment ENVIRONMENTAL... security? (a) An engine/equipment is exempt without a request if it will be used or owned by an agency of...) Manufacturers may request a national security exemption for engines/equipment not meeting the conditions of...

76 FR 60452 - Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... food packaging solutions. EuroPlast, Ltd 100 S. Industrial Lane, 9/9/2011 The firm manufactures plastic... Centech Road, Omaha, 9/19/2011 The firm designs and NE 68138. manufactures equipment used to manufacture... manufactures custom Covington, LA 70433. cabinetry and millwork. Oakridge Seafood, LLC 3408 E. Old Spanish 9/12...

36 CFR 1193.23 - Product design, development, and evaluation.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., usability, and compatibility of telecommunications equipment and customer premises equipment and shall... as possible. Manufacturers shall identify barriers to accessibility and usability as part of such a...

Design and performance of the VLT 8-m coating unit

NASA Astrophysics Data System (ADS)

Schneermann, Michael W.; Groessl, M.; Nienaber, U.; Ettlinger, E.; Spiteri, J. A.; Clow, H.

1997-03-01

The 8 m coating unit for the VLT mirrors is designed for the deposition of high reflective, homogeneous aluminum coatings. For the process of the film deposition the sputter technology is utilized. The design of the following major subsystems is completed: the vacuum vessel and the vacuum generation system, the thin film deposition equipment and the glow discharge cleaning device, the substrate support and rotation system as well as the supporting framework and the auxiliary equipment. Manufacturing of the coating unit has started. The pre- assembly and testing activities, which will take place prior to the shipment to the site, are defined. This paper describes the design features and the major performance requirements of the 8 m coating unit. The performance of the sputter source design has been verified in a qualification test. The deposition rate, the film thickness and reflectance, as well as the film purity have been measured. The test set-up and the results of the qualification tests of the selected magnetron type are presented and discussed.

40 CFR 1039.625 - What requirements apply under the program for equipment-manufacturer flexibility?

Code of Federal Regulations, 2011 CFR

2011-07-01

... is manufactured. (4) An e-mail address and phone number to contact for further information, or a Web... secondary engine manufacturers. (l) [Reserved] (m) Additional exemptions for technical or engineering... avoided with reasonable discretion have resulted in technical or engineering problems that prevent you...

WASTE MINIMIZATION ASSESSMENT FOR A MANUFACTURER OF CUTTING AND WELDING EQUIPMENT

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot program to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so in an effort to assist these manufacturers Waste Minimization Assessment Cent...

ENVIRONMENTAL RESEARCH BRIEF: POLLUTION PREVENTION ASSESSMENT FOR A MANUFACTURER OF FOOD SERVICE EQUIPMENT

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. n an effort to assist these manufacturers Waste Minimization Assessment Cent...

Human Body Size in Military Aircraft and Personal Equipment

DTIC Science & Technology

1946-06-01

manufacturers and others for use in the manufacti or purchase of supplies, or for any other purpose, the Goernment assumes responsibility nor obligation... responsibility ’ of the designer and the manufacturer to h’ave provided:tolerancesin the plane in’ order to insure efficient installation of the equipment...ional dependability. At the out-break of Y;orld Tar II, the Army Air Forces had no responsibility .n the development and procurement of flying clothing

36 CFR § 1193.23 - Product design, development, and evaluation.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., usability, and compatibility of telecommunications equipment and customer premises equipment and shall... as possible. Manufacturers shall identify barriers to accessibility and usability as part of such a...

29 CFR 1926.602 - Material handling equipment.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Brake systems for self-propelled rubber-tired off-highway equipment manufactured after January 1, 1972... Engineers Recommended Practices: Self-Propelled Scrapers SAE J319b-1971. Self-Propelled Graders SAE J236... condition. (ii) No employer shall permit earthmoving or compacting equipment which has an obstructed view to...

29 CFR 1926.602 - Material handling equipment.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Brake systems for self-propelled rubber-tired off-highway equipment manufactured after January 1, 1972... Engineers Recommended Practices: Self-Propelled Scrapers SAE J319b-1971. Self-Propelled Graders SAE J236... condition. (ii) No employer shall permit earthmoving or compacting equipment which has an obstructed view to...

29 CFR 1926.602 - Material handling equipment.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Brake systems for self-propelled rubber-tired off-highway equipment manufactured after January 1, 1972... Engineers Recommended Practices: Self-Propelled Scrapers SAE J319b-1971. Self-Propelled Graders SAE J236... condition. (ii) No employer shall permit earthmoving or compacting equipment which has an obstructed view to...

47 CFR 74.655 - Authorization of equipment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... rules concerning modifications to authorized equipment. (d) Any manufacturer of a transmitter to be used... relay station, a TV translator relay station, or a TV microwave booster station, shall be authorized... Auxiliary Stations § 74.655 Authorization of equipment. (a) Except as provided in paragraph (b) of this...

47 CFR 74.655 - Authorization of equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... rules concerning modifications to authorized equipment. (d) Any manufacturer of a transmitter to be used... relay station, a TV translator relay station, or a TV microwave booster station, shall be authorized... Auxiliary Stations § 74.655 Authorization of equipment. (a) Except as provided in paragraph (b) of this...

47 CFR 74.655 - Authorization of equipment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... rules concerning modifications to authorized equipment. (d) Any manufacturer of a transmitter to be used... relay station, a TV translator relay station, or a TV microwave booster station, shall be authorized... Auxiliary Stations § 74.655 Authorization of equipment. (a) Except as provided in paragraph (b) of this...

Equipment & New Products.

ERIC Educational Resources Information Center

Poitras, Adrian W., Ed.

1979-01-01

Reviews new science equipment and products for the laboratory. Includes hand-held calculators, fiberglass fume hoods, motorized microtomy, disposable mouse cages, and electric timers. Describes 11 products total. Provides manufacturer name, address, and price. (MA)

21 CFR 211.67 - Equipment cleaning and maintenance.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Equipment cleaning and maintenance. 211.67 Section 211.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.67...

21 CFR 211.67 - Equipment cleaning and maintenance.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Equipment cleaning and maintenance. 211.67 Section 211.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.67...

21 CFR 211.67 - Equipment cleaning and maintenance.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Equipment cleaning and maintenance. 211.67 Section 211.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.67...

21 CFR 211.67 - Equipment cleaning and maintenance.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Equipment cleaning and maintenance. 211.67 Section 211.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.67...

21 CFR 111.27 - What requirements apply to the equipment and utensils that you use?

Code of Federal Regulations, 2012 CFR

2012-04-01

... MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Equipment and Utensils § 111... contamination of components or dietary supplements with: (i) Lubricants; (ii) Fuel; (iii) Coolants; (iv) Metal... equipment or utensils contact components or dietary supplements; (iii) Made of nontoxic materials; (iv...

21 CFR 111.27 - What requirements apply to the equipment and utensils that you use?

Code of Federal Regulations, 2014 CFR

2014-04-01

... MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Equipment and Utensils § 111... contamination of components or dietary supplements with: (i) Lubricants; (ii) Fuel; (iii) Coolants; (iv) Metal... equipment or utensils contact components or dietary supplements; (iii) Made of nontoxic materials; (iv...

Laboratory Resources Management in Manufacturing Systems Programs

ERIC Educational Resources Information Center

Obi, Samuel C.

2004-01-01

Most, if not all, industrial technology (IT) programs have laboratories or workshops. Often equipped with modern equipment, tools, materials, and measurement and test instruments, these facilities constitute a major investment for IT programs. Improper use or over use of program facilities may result in dirty lab equipment, lost or damaged tools,…

21 CFR 211.67 - Equipment cleaning and maintenance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment cleaning and maintenance. 211.67 Section 211.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.67...

15 CFR 9.4 - Development of voluntary energy conservation specifications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... efficiency characteristics of the class of appliance or equipment. (3) A prototype Label and directions for... conditions of use, and stating that any manufacturer of appliances or equipment in the class concerned desiring voluntarily to use the Label and Energy Conservation Mark with such appliances or equipment must...

Influence of manufacturing practices on quality of pharmaceutical products manufactured in Kenya.

PubMed

Orwa, J A; Keter, L K; Ouko, S P A; Kibwage, I O; Rukunga, G M

2004-06-01

To establish the quality of pharmaceutical products manufactured by the respective industries in Kenya and determine the effect of manufacturing practices on the quality of these products. Cross-sectional study. Industries examined are in Nairobi, Kenya. Laboratory analysis was carried out using available facilities at Kenya Medical Research Institute and University of Nairobi, Faculty of Pharmacy. Structured Questionnaires were administered to examine how the code of good manufacturing practices has been used in the production of each pharmaceutical product by respective companies. Questionnaires designed to evaluate the distribution and carry out limited post-market surveillance study were administered to community pharmacy outlets. Drugs were sampled and analyzed for their quality according to the respective monographs. The questionnaires administered to the industry included the source of raw materials, quarantine procedure before and after manufacture, manufacturing procedure, quality audit, quality assurance procedure, equipment, and staff. That administered to the pharmacy outlet included availability, affordability and acceptability of locally manufactured pharmaceutical products. Quality analysis of products involved the establishment of the chemical content, dissolution profile, friability, uniformity of weight and identity. For antibiotic suspensions the stability after reconstitution was also determined. There were 15 respondents and two non-respondents from the industry and six out of nine respondents from the pharmacy outlets. The ratio of qualified staff to product range produced seemed to influence product quality. Industries producing several products with only limited number of pharmaceutical staff had more products failing to comply with pharmacopoeia specifications compared to those producing only few products. Nevertheless, all companies are well equipped with quality control equipment, in accordance with type of product manufactured. Private pharmacies stocked few of the locally manufactured products. The reason, they said, was due to low doctor and/or patient acceptance. Compliance with quality specifications as set out in respective monographs was overall 76%. Although the local pharmaceutical industries have adopted good manufacturing practices leading to many good quality products currently in commerce, these manufacturing practices are not comprehensive and measures need to be taken to continue improving them.

Modeling of industrial stream and resources of machine-building enterpriser complex of wood preparation

NASA Astrophysics Data System (ADS)

Sereda, T. G.; Kostarev, S. N.

2018-03-01

Theoretical bases of linkage of material streams of the machine-building enterprise and the automated system of decision-making are developed. The process of machine-building manufacture is submitted by the existential system. The equation of preservation of movement is based on calculation of volume of manufacture. The basis of resource variables includes capacities and operators of the equipment. Indignations such as a defect and failure are investigated in the existential basis. The equation of a stream of details on a manufacturing route is made. The received analytical expression expresses a condition of a stream of movement of details in view of influence of work of the equipment and traumatism of the personnel.

Simulating The Technological Movements Of The Equipment Used For Manufacturing Prosthetic Devices Using 3D Models

NASA Astrophysics Data System (ADS)

Chicea, Anca-Lucia

2015-09-01

The paper presents the process of building geometric and kinematic models of a technological equipment used in the process of manufacturing devices. First, the process of building the model for a six axes industrial robot is presented. In the second part of the paper, the process of building the model for a five-axis CNC milling machining center is also shown. Both models can be used for accurate cutting processes simulation of complex parts, such as prosthetic devices.

Prospective areas in the production technology of scientific equipment for space research

NASA Technical Reports Server (NTRS)

Breslavets, A. V.

1974-01-01

The average labor of individual types of operations in the percentage ratio of the total labor consumption of manufacturing scientific instruments and apparatus for space research is presented. The prospective areas in the production technology of billet, machining, mechanical assembly, installation and assembly, adjustment and regulation and testing and control operations are noted. Basic recommendations are made with respect to further reduction of labor consumption and an increase in the productivity of labor when manufacturing scientific equipment for space research.

Extraterrestrial processing and manufacturing of large space systems, volume 2, chapters 7-14 and appendices

NASA Technical Reports Server (NTRS)

Miller, R. H.; Smith, D. B. S.

1979-01-01

Production and support equipment specifications are described for the space manufacturing facility (SMF). Defined production equipment includes electromagnetic pumps for liquid metal, metal alloying furnaces, die casters, electron beam welders and cutters, glass forming for structural elements, and rolling. A cost analysis is presented which includes the development, the aquisition of all SMF elements, initial operating cost, maintenance and logistics cost, cost of terrestrial materials, and transportation cost for each major element. Computer program listings and outputs are appended.

Modern high-strength steels for heavily loaded gearing (a review of engineering patents)

NASA Astrophysics Data System (ADS)

Voronenko, B. I.

1996-08-01

In order to increase the service life of machines the life of their parts should be increased. For example, in machine tool and lifting-and-transport manufacture the maintenance cost of the equipment over the duration of its operation often exceeds the cost of the new equipment by a factor of 10-20. This imposes strict requirements on structural materials for heavily loaded gearings, including the development of high-strength, wear-resistant, manufacture-adaptable, and economically alloyed steels.

Surrogate Final Technical Report for "Solar: A Photovoltaic Manufacturing Development Facility"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrar, Paul

2014-06-27

The project goal to create a first-of-a-kind crystalline Silicon (c-Si) photovoltaic (PV) Manufacturing & Technology Development Facility (MDF) that will support the growth and maturation of a strong domestic PV manufacturing industry, based on innovative and differentiated technology, by ensuring industry participants can, in a timely and cost-effective manner, access cutting-edge manufacturing equipment and production expertise needed to accelerate the transition of innovative technologies from R&D into manufacturing.

49 CFR 178.706 - Standards for rigid plastic IBCs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... than production residues or regrind from the same manufacturing process may be used in the manufacture... those used in the manufacture of the tested design type, retesting may be omitted if changes in the... types are designated: (1) 11H1 fitted with structural equipment designed to withstand the whole load...

40 CFR 79.54 - Tier 3.

Code of Federal Regulations, 2011 CFR

2011-07-01

... emission control equipment. (3) A manufacturer or group may be required to conduct biological and/or... Requiring Tier 3 Testing. (1) Tier 3 testing shall be required of a manufacturer or group of manufacturers... products. Tier 3 testing may be conducted either on an individual basis or a group basis. If performed on a...

40 CFR 79.54 - Tier 3.

Code of Federal Regulations, 2014 CFR

2014-07-01

... emission control equipment. (3) A manufacturer or group may be required to conduct biological and/or... Requiring Tier 3 Testing. (1) Tier 3 testing shall be required of a manufacturer or group of manufacturers... products. Tier 3 testing may be conducted either on an individual basis or a group basis. If performed on a...

40 CFR 79.54 - Tier 3.

Code of Federal Regulations, 2012 CFR

2012-07-01

... emission control equipment. (3) A manufacturer or group may be required to conduct biological and/or... Requiring Tier 3 Testing. (1) Tier 3 testing shall be required of a manufacturer or group of manufacturers... products. Tier 3 testing may be conducted either on an individual basis or a group basis. If performed on a...

40 CFR 79.54 - Tier 3.

Code of Federal Regulations, 2010 CFR

2010-07-01

... emission control equipment. (3) A manufacturer or group may be required to conduct biological and/or... Requiring Tier 3 Testing. (1) Tier 3 testing shall be required of a manufacturer or group of manufacturers... products. Tier 3 testing may be conducted either on an individual basis or a group basis. If performed on a...

40 CFR 79.54 - Tier 3.

Code of Federal Regulations, 2013 CFR

2013-07-01

... emission control equipment. (3) A manufacturer or group may be required to conduct biological and/or... Requiring Tier 3 Testing. (1) Tier 3 testing shall be required of a manufacturer or group of manufacturers... products. Tier 3 testing may be conducted either on an individual basis or a group basis. If performed on a...

40 CFR 1068.101 - What general actions does this regulation prohibit?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., operating an engine without a supply of appropriate quality urea if the emissions control system relies on urea to reduce NOx emissions or the use of incorrect fuel or engine oil that renders the emissions... manufacturers of new engines, manufacturers of equipment containing these engines, and manufacturers of new...

40 CFR 1068.101 - What general actions does this regulation prohibit?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., operating an engine without a supply of appropriate quality urea if the emissions control system relies on urea to reduce NOx emissions or the use of incorrect fuel or engine oil that renders the emissions... manufacturers of new engines, manufacturers of equipment containing these engines, and manufacturers of new...

40 CFR 1068.101 - What general actions does this regulation prohibit?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., operating an engine without a supply of appropriate quality urea if the emissions control system relies on urea to reduce NOx emissions or the use of incorrect fuel or engine oil that renders the emissions... manufacturers of new engines, manufacturers of equipment containing these engines, and manufacturers of new...

21 CFR 509.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

Code of Federal Regulations, 2012 CFR

2012-04-01

...-packaging materials shall: (i) Have the heat exchange fluid used in existing equipment for manufacturing... manufacturing practices be replaced with a heat exchange fluid that does not contain PCB's. (ii) Eliminate to... (Japan). PCB's are highly stable, heat resistant, and nonflammable chemicals. Industrial uses of PCB's...

21 CFR 509.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

Code of Federal Regulations, 2013 CFR

2013-04-01

...-packaging materials shall: (i) Have the heat exchange fluid used in existing equipment for manufacturing... manufacturing practices be replaced with a heat exchange fluid that does not contain PCB's. (ii) Eliminate to... (Japan). PCB's are highly stable, heat resistant, and nonflammable chemicals. Industrial uses of PCB's...

21 CFR 109.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

Code of Federal Regulations, 2012 CFR

2012-04-01

...-packaging materials shall: (i) Have the heat exchange fluid used in existing equipment for manufacturing... manufacturing practices be replaced with a heat exchange fluid that does not contain PCB's. (ii) Eliminate to... (Japan). PCB's are highly stable, heat resistant, and nonflammable chemicals. Industrial uses of PCB's...

21 CFR 109.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

Code of Federal Regulations, 2014 CFR

2014-04-01

...-packaging materials shall: (i) Have the heat exchange fluid used in existing equipment for manufacturing... manufacturing practices be replaced with a heat exchange fluid that does not contain PCB's. (ii) Eliminate to... (Japan). PCB's are highly stable, heat resistant, and nonflammable chemicals. Industrial uses of PCB's...

Nonterrestrial material processing and manufacturing of large space systems

NASA Technical Reports Server (NTRS)

Vontiesenhausen, G. F.

1978-01-01

An attempt is made to provide pertinent and readily usable information on the extraterrestrial processing of materials and manufacturing of components and elements of these planned large space systems from preprocessed lunar materials which are made available at a processing and manufacturing site in space. Required facilities, equipment, machinery, energy and manpower are defined.

21 CFR 225.35 - Use of work areas, equipment, and storage areas for other manufacturing and storage purpose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING..., rodenticides, and other pesticides. Manufacturing, storage, or handling of nonfeed and feed products in the... pesticides unless such articles are approved drugs, indexed drugs, or approved food additives intended for...

21 CFR 225.35 - Use of work areas, equipment, and storage areas for other manufacturing and storage purpose.

Code of Federal Regulations, 2011 CFR

2011-04-01

... ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING..., rodenticides, and other pesticides. Manufacturing, storage, or handling of nonfeed and feed products in the... pesticides unless such articles are approved drugs, indexed drugs, or approved food additives intended for...

21 CFR 225.35 - Use of work areas, equipment, and storage areas for other manufacturing and storage purpose.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING..., rodenticides, and other pesticides. Manufacturing, storage, or handling of nonfeed and feed products in the... pesticides unless such articles are approved drugs, indexed drugs, or approved food additives intended for...

21 CFR 225.35 - Use of work areas, equipment, and storage areas for other manufacturing and storage purpose.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING..., rodenticides, and other pesticides. Manufacturing, storage, or handling of nonfeed and feed products in the... pesticides unless such articles are approved drugs, indexed drugs, or approved food additives intended for...

21 CFR 225.35 - Use of work areas, equipment, and storage areas for other manufacturing and storage purpose.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING..., rodenticides, and other pesticides. Manufacturing, storage, or handling of nonfeed and feed products in the... pesticides unless such articles are approved drugs, indexed drugs, or approved food additives intended for...

40 CFR 86.1826-01 - Assigned deterioration factors for small volume manufacturers and small volume test groups.

Code of Federal Regulations, 2012 CFR

2012-07-01

... durability groups) that is equipped with unproven emission control systems. (v) The manufacturer must... small volume manufacturers and small volume test groups. 86.1826-01 Section 86.1826-01 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW...

40 CFR 86.1826-01 - Assigned deterioration factors for small volume manufacturers and small volume test groups.

Code of Federal Regulations, 2013 CFR

2013-07-01

... durability groups) that is equipped with unproven emission control systems. (v) The manufacturer must... small volume manufacturers and small volume test groups. 86.1826-01 Section 86.1826-01 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW...

40 CFR 86.1826-01 - Assigned deterioration factors for small volume manufacturers and small volume test groups.

Code of Federal Regulations, 2011 CFR

2011-07-01

... durability groups) that is equipped with unproven emission control systems. (v) The manufacturer must... small volume manufacturers and small volume test groups. 86.1826-01 Section 86.1826-01 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW...

40 CFR 86.1826-01 - Assigned deterioration factors for small volume manufacturers and small volume test groups.

Code of Federal Regulations, 2010 CFR

2010-07-01

... durability groups) that is equipped with unproven emission control systems. (v) The manufacturer must... small volume manufacturers and small volume test groups. 86.1826-01 Section 86.1826-01 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW...

Acquisition of specialized testing equipment for advanced cement-based materials.

DOT National Transportation Integrated Search

2014-07-01

This equipment purchase will enabled the development, manufacturing, and implementation of advanced and sustainable materials for transportation infrastructure, with emphasis on concrete. The developments of green technologies that can lead to ...

19 CFR 151.13 - Approval of commercial gaugers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... gauger). In general, each technical staff member should have, at a minimum, six months training and..., manufacturer, and country-of-origin. (ii) Major equipment records. Records for each major piece of equipment...

A history of development in rotordynamics: A manufacturer's perspective

NASA Technical Reports Server (NTRS)

Shemeld, David E.

1987-01-01

The subject of rotordynamics and instability problems in high performance turbomachinery has been a topic of considerable industry discussion and debate over the last 15 or so years. This paper reviews an original equipment manufacturer's history of development of concepts and equipment as applicable to multistage centrifugal compressors. The variety of industry user compression requirements and resultant problematical situations tends to confound many of the theories and analytical techniques set forth. The experiences and examples described herein support the conclusion that the successful addressing of potential rotordynamics problems is best served by a fundamental knowledge of the specific equipment. This in addition to having the appropriate analytical tools. Also, that the final proof is in the doing.

Recent research in data description of the measurement property resource on common data dictionary

NASA Astrophysics Data System (ADS)

Lu, Tielin; Fan, Zitian; Wang, Chunxi; Liu, Xiaojing; Wang, Shuo; Zhao, Hua

2018-03-01

A method for measurement equipment data description has been proposed based on the property resource analysis. The applications of common data dictionary (CDD) to devices and equipment is mainly used in digital factory to advance the management not only in the enterprise, also to the different enterprise in the same data environment. In this paper, we can make a brief of the data flow in the whole manufacture enterprise and the automatic trigger the process of the data exchange. Furthermore,the application of the data dictionary is available for the measurement and control equipment, which can also be used in other different industry in smart manufacture.

Public service user terminus study compendium of terminus equipment

NASA Technical Reports Server (NTRS)

1979-01-01

General descriptions and specifications are given for equipments which facilitate satellite and terrestrial communications delivery by acting as interfaces between a human, mechanical, or electrical information generator (or source) and the communication system. Manufactures and suppliers are given as well as the purchase, service, or lease costs of various products listed under the following cateories: voice/telephony/facsimile equipment; data/graphics terminals; full motion and processes video equipment; and multiple access equipment.

AUTOMATING ASSET KNOWLEDGE WITH MTCONNECT.

PubMed

Venkatesh, Sid; Ly, Sidney; Manning, Martin; Michaloski, John; Proctor, Fred

2016-01-01

In order to maximize assets, manufacturers should use real-time knowledge garnered from ongoing and continuous collection and evaluation of factory-floor machine status data. In discrete parts manufacturing, factory machine monitoring has been difficult, due primarily to closed, proprietary automation equipment that make integration difficult. Recently, there has been a push in applying the data acquisition concepts of MTConnect to the real-time acquisition of machine status data. MTConnect is an open, free specification aimed at overcoming the "Islands of Automation" dilemma on the shop floor. With automated asset analysis, manufacturers can improve production to become lean, efficient, and effective. The focus of this paper will be on the deployment of MTConnect to collect real-time machine status to automate asset management. In addition, we will leverage the ISO 22400 standard, which defines an asset and quantifies asset performance metrics. In conjunction with these goals, the deployment of MTConnect in a large aerospace manufacturing facility will be studied with emphasis on asset management and understanding the impact of machine Overall Equipment Effectiveness (OEE) on manufacturing.

Medical technology at home: safety-related items in technical documentation.

PubMed

Hilbers, Ellen S M; de Vries, Claudette G J C A; Geertsma, Robert E

2013-01-01

This study aimed to investigate the technical documentation of manufacturers on issues of safe use of their device in a home setting. Three categories of equipment were selected: infusion pumps, ventilators, and dialysis systems. Risk analyses, instructions for use, labels, and post market surveillance procedures were requested from manufacturers. Additionally, they were asked to fill out a questionnaire on collection of field experience, on incidents, and training activities. Specific risks of device operation by lay users in a home setting were incompletely addressed in the risk analyses. A substantial number of user manuals were designed for professionals, rather than for patients or lay carers. Risk analyses and user information often showed incomplete coherence. Post market surveillance was mainly based on passive collection of field experiences. Manufacturers of infusion pumps, ventilators, and dialysis systems pay insufficient attention to the specific risks of use by lay persons in home settings. It is expected that this conclusion is also applicable for other medical equipment for treatment at home. Manufacturers of medical equipment for home use should pay more attention to use errors, lay use and home-specific risks in design, risk analysis, and user information. Field experiences should be collected more actively. Coherence between risk analysis and user information should be improved. Notified bodies should address these aspects in their assessment. User manuals issued by institutions supervising a specific home therapy should be drawn up in consultation with the manufacturer.

Virtual manufacturing work cell for engineering

NASA Astrophysics Data System (ADS)

Watanabe, Hideo; Ohashi, Kazushi; Takahashi, Nobuyuki; Kato, Kiyotaka; Fujita, Satoru

1997-12-01

The life cycles of products have been getting shorter. To meet this rapid turnover, manufacturing systems must be frequently changed as well. In engineering to develop manufacturing systems, there are several tasks such as process planning, layout design, programming, and final testing using actual machines. This development of manufacturing systems takes a long time and is expensive. To aid the above engineering process, we have developed the virtual manufacturing workcell (VMW). This paper describes a concept of VMW and design method through computer aided manufacturing engineering using VMW (CAME-VMW) related to the above engineering tasks. The VMW has all design data, and realizes a behavior of equipment and devices using a simulator. The simulator has logical and physical functionality. The one simulates a sequence control and the other simulates motion control, shape movement in 3D space. The simulator can execute the same control software made for actual machines. Therefore we can verify the behavior precisely before the manufacturing workcell will be constructed. The VMW creates engineering work space for several engineers and offers debugging tools such as virtual equipment and virtual controllers. We applied this VMW to development of a transfer workcell for vaporization machine in actual manufacturing system to produce plasma display panel (PDP) workcell and confirmed its effectiveness.

Equipment and Analytical Companies Meeting Continuous Challenges May 20-21 2014 Continuous Manufacturing Symposium.

PubMed

Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

2015-03-01

This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white papers. In the equipment domain, this is equally prevalent among a broad range of companies, mainly focusing on discrete areas. As an example, the flow chemistry and secondary drug product communities are almost entirely disconnected. Control and Process Analytical Technologies (PAT) companies are active in both domains. The equipment actors are a very diverse group with a few major Original Equipment Manufacturers (OEM) players and a variety of SME, project providers, integrators, upstream downstream providers, and specialist PAT. In some cases, partnerships or alliances are formed to increase critical mass. This white paper has focused on small molecules; equipment associated with biopharmaceuticals is covered in a separate white paper. More specifics on equipment detail are provided in final dosage form and drug substance white papers. The equipment and analytical development from laboratory to pilot to production is important, with a variety of sensors and complexity reducing with scale. The importance of robust processing rather than overcomplex control strategy mitigation is important. A search of nonacademic literature highlights, with a few notable exceptions, a relative paucity of material. Much focuses on the economics and benefits of continuous, rather than specifics of equipment issues. The disruptive nature of continuous manufacturing represents either an opportunity or a threat for many companies, so the incentive to change equipment varies. Also, for many companies, the pharmaceutical sector is not actually the dominant sector in terms of sales. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Equipment and analytical companies meeting continuous challenges. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Page, Trevor; Dubina, Henry; Fillipi, Gabriele; Guidat, Roland; Patnaik, Saroj; Poechlauer, Peter; Shering, Phil; Guinn, Martin; Mcdonnell, Peter; Johnston, Craig

2015-03-01

This white paper focuses on equipment, and analytical manufacturers' perspectives, regarding the challenges of continuous pharmaceutical manufacturing across five prompt questions. In addition to valued input from several vendors, commentary was provided from experienced pharmaceutical representatives, who have installed various continuous platforms. Additionally, a small medium enterprise (SME) perspective was obtained through interviews. A range of technical challenges is outlined, including: the presence of particles, equipment scalability, fouling (and cleaning), technology derisking, specific analytical challenges, and the general requirement of improved technical training. Equipment and analytical companies can make a significant contribution to help the introduction of continuous technology. A key point is that many of these challenges exist in batch processing and are not specific to continuous processing. Backward compatibility of software is not a continuous issue per se. In many cases, there is available learning from other industries. Business models and opportunities through outsourced development partners are also highlighted. Agile smaller companies and academic groups have a key role to play in developing skills, working collaboratively in partnerships, and focusing on solving relevant industry challenges. The precompetitive space differs for vendor companies compared with large pharmaceuticals. Currently, there is no strong consensus around a dominant continuous design, partly because of business dynamics and commercial interests. A more structured common approach to process design and hardware and software standardization would be beneficial, with initial practical steps in modeling. Conclusions include a digestible systems approach, accessible and published business cases, and increased user, academic, and supplier collaboration. This mirrors US FDA direction. The concept of silos in pharmaceutical companies is a common theme throughout the white papers. In the equipment domain, this is equally prevalent among a broad range of companies, mainly focusing on discrete areas. As an example, the flow chemistry and secondary drug product communities are almost entirely disconnected. Control and Process Analytical Technologies (PAT) companies are active in both domains. The equipment actors are a very diverse group with a few major Original Equipment Manufacturers (OEM) players and a variety of SME, project providers, integrators, upstream downstream providers, and specialist PAT. In some cases, partnerships or alliances are formed to increase critical mass. This white paper has focused on small molecules; equipment associated with biopharmaceuticals is covered in a separate white paper. More specifics on equipment detail are provided in final dosage form and drug substance white papers. The equipment and analytical development from laboratory to pilot to production is important, with a variety of sensors and complexity reducing with scale. The importance of robust processing rather than overcomplex control strategy mitigation is important. A search of nonacademic literature highlights, with a few notable exceptions, a relative paucity of material. Much focuses on the economics and benefits of continuous, rather than specifics of equipment issues. The disruptive nature of continuous manufacturing represents either an opportunity or a threat for many companies, so the incentive to change equipment varies. Also, for many companies, the pharmaceutical sector is not actually the dominant sector in terms of sales. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Development of an automatic test equipment for nano gauging displacement transducers

NASA Astrophysics Data System (ADS)

Wang, Yung-Chen; Jywe, Wen-Yuh; Liu, Chien-Hung

2005-01-01

In order to satisfy the increasing demands on the precision in manufacturing technology, nanaometrology gradually becomes more important in manufacturing process. To ensure the precision of manufacture, precise measuring instruments and sensors play a decesive role for the accurate characterization and inspection of products. For linear length inspection, high precision gauging displacement transducers, i.e. nano gauging displacement transducers (NGDT), have been often utilized, which have been often utilized, which have the resolution in the nanometer range and can achieve an accuracy of less than 100 nm. Such measurement instruments include transducers based on electronic as well as optical measurement principles, e.g. inductive, incremental-optical or interference optical. To guarantee the accuracy and the traceability to the definition of the meter, calibration and test of NGDT are essential. Currently, there are some methods and machines for test of NGDT, but they suffer from various disadvantages. Some of them permit only manual test procedures which are time-consuming, e.g. with high accurate gauge blocks as material measures. Other tests can reach higher accuracy only in the micrometer range or result in uncertainties of more than 100 nm in the large measuring ranges. To realize the test of NGDT with a high resolution as well as a large measuring range, an automatic test equipment was constructed, that has a resolution of 1.24 nm, a measuring range of up to 20 nm (60 mm) and a measuring uncertainty of approximate ±10 nm can fulfil the requirements of high resolution within the nanometer range while simultaneously covering a large measuring range in the order of millimeters. The test system includes a stable frame, a polarization interferometer, an angle sensor, an angular control, a drive system and piezo translators. During the test procedure, the angular control and piezo translators minimize the Abbe error. For the automation of the test procedure a measuring program adhering to the measurement principle outlined in VDI/VDE 2617 guidelines was designed. With this program NGDT can be tested in less than thirty minutes with eleven measuring points and five repetitions. By mean of theoretical and experimental investigations it can be proved that the automatic test system achieves a test uncertainty of approx. ±10 nm at the measuring range of 18 mm, that corresponds to a relative uncertainty of approximately ±5 × 10-7. With small uncertainty, the minimization of the Abbe error and short test time, this system can be regarded as a universal and efficient precision test equipment, which is available for the accurate test of arbitrary high precision gauging displacement transducers.

Electrical-power-system data base for consumables analysis. Volume 1: Electrical equipment list, activity blocks, and time lines

NASA Technical Reports Server (NTRS)

Pipher, M. D.; Green, P. A.; Wolfgram, D. F.

1975-01-01

A standardized data base is described which consists of a space shuttle electrical equipment list, activity blocks defining electrical equipment utilization, and activity-block time lines for specific mission analyses. Information is presented to facilitate utilization of the data base, to provide the basis for the electrical equipment utilization to enable interpretation of analyses based on the data contained herein.

EUV mask manufacturing readiness in the merchant mask industry

NASA Astrophysics Data System (ADS)

Green, Michael; Choi, Yohan; Ham, Young; Kamberian, Henry; Progler, Chris; Tseng, Shih-En; Chiou, Tsann-Bim; Miyazaki, Junji; Lammers, Ad; Chen, Alek

2017-10-01

As nodes progress into the 7nm and below regime, extreme ultraviolet lithography (EUVL) becomes critical for all industry participants interested in remaining at the leading edge. One key cost driver for EUV in the supply chain is the reflective EUV mask. As of today, the relatively few end users of EUV consist primarily of integrated device manufactures (IDMs) and foundries that have internal (captive) mask manufacturing capability. At the same time, strong and early participation in EUV by the merchant mask industry should bring value to these chip makers, aiding the wide-scale adoption of EUV in the future. For this, merchants need access to high quality, representative test vehicles to develop and validate their own processes. This business circumstance provides the motivation for merchants to form Joint Development Partnerships (JDPs) with IDMs, foundries, Original Equipment Manufacturers (OEMs) and other members of the EUV supplier ecosystem that leverage complementary strengths. In this paper, we will show how, through a collaborative supplier JDP model between a merchant and OEM, a novel, test chip driven strategy is applied to guide and validate mask level process development. We demonstrate how an EUV test vehicle (TV) is generated for mask process characterization in advance of receiving chip maker-specific designs. We utilize the TV to carry out mask process "stress testing" to define process boundary conditions which can be used to create Mask Rule Check (MRC) rules as well as serve as baseline conditions for future process improvement. We utilize Advanced Mask Characterization (AMC) techniques to understand process capability on designs of varying complexity that include EUV OPC models with and without sub-resolution assist features (SRAFs). Through these collaborations, we demonstrate ways to develop EUV processes and reduce implementation risks for eventual mass production. By reducing these risks, we hope to expand access to EUV mask capability for the broadest community possible as the technology is implemented first within and then beyond the initial early adopters.

Solar-Radiation Measuring Equipment and Glossary

NASA Technical Reports Server (NTRS)

Carter, E. A.; Patel, A. M.; Greenbaum, S. A.

1982-01-01

1976 listing of commercially available solar-radiation measuring equipment is presented in 50-page report. Sensor type, response time, cost data, and comments concerning specifications and intended usage are listed for 145 instruments from 38 manufactures.

Noise Abatement Techniques for Construction Equipment

DOT National Transportation Integrated Search

1979-08-01

The primary objective of this work was to transfer technology developed in the area of truck noise reduction to that of construction equipment. Included is information gathered from previous contracts, surveys of manufacturers, a noise impact ranking...

40 CFR 63.8015 - What requirements apply to my equipment leaks?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Manufacturing Emission Limits, Work Practice Standards, and Compliance Requirements § 63.8015 What requirements... with § 63.1036(b) is not required after reconfiguration of an equipment train if flexible hose...

48 CFR 52.234-1 - Industrial Resources Developed Under Defense Production Act Title III.

Code of Federal Regulations, 2010 CFR

2010-10-01

... materials, services, processes, or manufacturing equipment (including the processes, technologies, and ancillary services for the use of such equipment) established or maintained under the authority of Title III...

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akar, Sertac; Augustine, Chad R; Kurup, Parthiv

The global geothermal electricity market has significantly grown over the last decade and is expected to reach a total installed capacity of 18.4 GWe in 2021 (GEA, 2016). Currently, geothermal project developers customize the size of the power plant to fit the resource being developed. In particular, the turbine is designed and sized to optimize efficiency and resource utilization for electricity production; most often, other power plant components are then chosen to complement the turbine design. These custom turbine designs demand one-off manufacturing processes, which result in higher manufacturing setup costs, longer lead-times, and higher capital costs overall in comparisonmore » to larger-volume line manufacturing processes. In contrast, turbines produced in standard increments, manufactured in larger volumes, could result in lower costs per turbine. This study focuses on analysis of the global supply chain and manufacturing costs for Organic Rankine Cycle (ORC) turboexpanders and steam turbines used in geothermal power plants. In this study, we developed a manufacturing cost model to identify requirements for equipment, facilities, raw materials, and labor. We analyzed three different cases 1) 1 MWe geothermal ORC turboexpander 2) 5 MWe ORC turboexpander and 3) 20 MWe geothermal steam turbine, and calculated the cost of manufacturing the major components, such as the impellers/blades, shaft/rotor, nozzles, inlet guide lanes, disks, and casings. Then we used discounted cash flow (DCF) analysis to calculate the minimum sustainable price (MSP). MSP is the minimum price that a company must sell its product for in order to pay back the capital and operating expenses during the plant lifetime (CEMAC, 2017). The results showed that MSP could highly vary between 893 dollar/kW and 30 dollar/kW based on turbine size, standardization and volume of manufacturing. The analysis also showed that the economy of scale applies both to the size of the turbine and the number manufactured in a single run. Sensitivity analysis indicated these savings come largely from reduced labor costs for design and engineering and manufacturing setup.« less

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akar, Sertac; Augustine, Chad R; Kurup, Parthiv

The global geothermal electricity market has significantly grown over the last decade and is expected to reach a total installed capacity of 18.4 GWe in 2021 (GEA, 2016). Currently, geothermal project developers customize the size of the power plant to fit the resource being developed. In particular, the turbine is designed and sized to optimize efficiency and resource utilization for electricity production; most often, other power plant components are then chosen to complement the turbine design. These custom turbine designs demand one-off manufacturing processes, which result in higher manufacturing setup costs, longer lead-times, and higher capital costs overall in comparisonmore » to larger-volume line manufacturing processes. In contrast, turbines produced in standard increments, manufactured in larger volumes, could result in lower costs per turbine. This study focuses on analysis of the global supply chain and manufacturing costs for Organic Rankine Cycle (ORC) turboexpanders and steam turbines used in geothermal power plants. In this study, we developed a manufacturing cost model to identify requirements for equipment, facilities, raw materials, and labor. We analyzed three different cases 1) 1 MWe geothermal ORC turboexpander 2) 5 MWe ORC turboexpander and 3) 20 MWe geothermal steam turbine, and calculated the cost of manufacturing the major components, such as the impellers/blades, shaft/rotor, nozzles, inlet guide lanes, disks, and casings. Then we used discounted cash flow (DCF) analysis to calculate the minimum sustainable price (MSP). MSP is the minimum price that a company must sell its product for in order to pay back the capital and operating expenses during the plant lifetime (CEMAC, 2017). The results showed that MSP could highly vary between 893 dollar/kW and 30 dollar/kW based on turbine size, standardization and volume of manufacturing. The analysis also showed that the economy of scale applies both to the size of the turbine and the number manufactured in a single run. Sensitivity analysis indicated these savings come largely from reduced labor costs for design and engineering and manufacturing setup.« less

78 FR 79006 - Certain Paper Shredders, Certain Processes for Manufacturing or Relating to Same and Certain...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... investigation named as respondents New United Co. Group Ltd.; Jiangsu New United Office Equipments Co. Ltd.; Shenzhen Elite Business Office Equipment Co. Ltd.; Elite Business Machines Ltd.; New United Office Equipment USA, Inc.; Jiangsu Shinri Machinery Co. Ltd. (collectively, the ``New United'' respondents); and...

DEVELOPMENT AND EVALUATION OF EDUCATIONAL PROGRAMS IN BIO-MEDICAL EQUIPMENT TECHNOLOGY, PHASE I. FINAL REPORT.

ERIC Educational Resources Information Center

Technical Education Research Center, Cambridge, MA.

OFFICIALS OF A REPRESENTATIVE SAMPLE OF HOSPITALS, BIOMEDICAL EQUIPMENT MANUFACTURERS, AND MEDICAL RESEARCH INSTITUTES IN NEW ENGLAND AND THREE MIDDLE ATLANTIC STATES WERE INTERVIEWED TO DETERMINE THE NEED FOR TECHNICIANS TO SERVICE AND MAINTAIN EQUIPMENT FOUND IN HOSPITALS AND BIOMEDICAL RESEARCH INSTITUTIONS. RESPONSES INDICATED A NEED FOR…

21 CFR 111.30 - What requirements apply to automated, mechanical, or electronic equipment?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What requirements apply to automated, mechanical... Utensils § 111.30 What requirements apply to automated, mechanical, or electronic equipment? For any automated, mechanical, or electronic equipment that you use to manufacture, package, label, or hold a...

Equipment development for automated assembly of solar modules

NASA Technical Reports Server (NTRS)

Hagerty, J. J.

1982-01-01

Prototype equipment was developed which allows for totally automated assembly in the three major areas of module manufacture: cell stringing, encapsulant layup and cure and edge sealing. The equipment is designed to be used in conjunction with a standard Unimate 2000B industrial robot although the design is adaptable to other transport systems.

Recommendations For The Safe Design, Operation And Use Of Commercial Sun Tanning Equipment

NASA Astrophysics Data System (ADS)

Cox, E. A.

1982-02-01

HSE Guidance Notes are being prepared to give recommendations to the designers, manufacturers, operators and users of commercial sun tanning equipment on the various health and safety aspects associated with the safe construction, siting and use of such equipment. Medically prescribed ultraviolet treatments are excluded from the guidance.

Equipment and Supplies For Collecting, Processing, Storing, and Testing Forest Tree Seed

Treesearch

F.T. Bonner

1977-01-01

This publication is a directory of information on equipment and supplies used in handling and treating tree seed. The use of each device is briefly described. Specifications such as size, capacity, or model number are given. Manufacturers' or suppliers' names are listed, and users of the equipment are identified.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, O.N.; Barone, G.J.

The Federal Performance Standard for Diagnostic X-ray Equipment, which became effective August 1, 1974, is primarily directed toward manufacturers, who must produce x-ray equipment that performs in a prescribed way. It is an equipment performance standard and does not reguate diagnostic x-ray uses. The dentist, however, has responsibilities in three areas - maintenance, assembly, and variance from the standard.

Efficiency improvement of technological preparation of power equipment manufacturing

NASA Astrophysics Data System (ADS)

Milukov, I. A.; Rogalev, A. N.; Sokolov, V. P.; Shevchenko, I. V.

2017-11-01

Competitiveness of power equipment primarily depends on speeding-up the development and mastering of new equipment samples and technologies, enhancement of organisation and management of design, manufacturing and operation. Actual political, technological and economic conditions cause the acute need in changing the strategy and tactics of process planning. At that the issues of maintenance of equipment with simultaneous improvement of its efficiency and compatibility to domestically produced components are considering. In order to solve these problems, using the systems of computer-aided process planning for process design at all stages of power equipment life cycle is economically viable. Computer-aided process planning is developed for the purpose of improvement of process planning by using mathematical methods and optimisation of design and management processes on the basis of CALS technologies, which allows for simultaneous process design, process planning organisation and management based on mathematical and physical modelling of interrelated design objects and production system. An integration of computer-aided systems providing the interaction of informative and material processes at all stages of product life cycle is proposed as effective solution to the challenges in new equipment design and process planning.

Automatic hot wire GTA welding of pipe offers speed and increased deposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sykes, I.; Digiacomo, J.

1995-07-01

Heavy-wall pipe welding for the power and petrochemical industry must meet code requirements. Contractors strive to meet these requirements in the most productive way possible. The challenge put to orbital welding equipment manufacturers is to produce pipe welding equipment that cost-effectively produces code-quality welds. Orbital welding equipment using the GTA process has long produced outstanding quality results but has lacked the deposition rate to compete cost effectively with other manual and semiautomatic processes such as SMAW, FCAW and GMAW. In recent years, significant progress has been made with the use of narrow-groove weld joint designs to reduce weld joint volumemore » and improve welding times. Astro Arc Polysoude, an orbital welding equipment manufacturer based in Sun Valley, Calif., and Nantes, France, has combined the hot wire GTAW process with orbital welding equipment using a narrow-groove weld joint design. Field test results show this process and procedure is a good alternative for many heavy-wall-pipe welding applications.« less

Identification of the actual state and entity availability forecasting in power engineering using neural-network technologies

NASA Astrophysics Data System (ADS)

Protalinsky, O. M.; Shcherbatov, I. A.; Stepanov, P. V.

2017-11-01

A growing number of severe accidents in RF call for the need to develop a system that could prevent emergency situations. In a number of cases accident rate is stipulated by careless inspections and neglects in developing repair programs. Across the country rates of accidents are growing because of a so-called “human factor”. In this regard, there has become urgent the problem of identification of the actual state of technological facilities in power engineering using data on engineering processes running and applying artificial intelligence methods. The present work comprises four model states of manufacturing equipment of engineering companies: defect, failure, preliminary situation, accident. Defect evaluation is carried out using both data from SCADA and ASEPCR and qualitative information (verbal assessments of experts in subject matter, photo- and video materials of surveys processed using pattern recognition methods in order to satisfy the requirements). Early identification of defects makes possible to predict the failure of manufacturing equipment using mathematical techniques of artificial neural network. In its turn, this helps to calculate predicted characteristics of reliability of engineering facilities using methods of reliability theory. Calculation of the given parameters provides the real-time estimation of remaining service life of manufacturing equipment for the whole operation period. The neural networks model allows evaluating possibility of failure of a piece of equipment consistent with types of actual defects and their previous reasons. The article presents the grounds for a choice of training and testing samples for the developed neural network, evaluates the adequacy of the neural networks model, and shows how the model can be used to forecast equipment failure. There have been carried out simulating experiments using a computer and retrospective samples of actual values for power engineering companies. The efficiency of the developed model for different types of manufacturing equipment has been proved. There have been offered other research areas in terms of the presented subject matter.

Automotive Manufacturing Processes. volume I - Overview

DOT National Transportation Integrated Search

1981-02-01

Extensive material substitution and re-sizing of the domestic automotive fleet, as well as the introduction of new technologies, will require major changes in the techniques and equipment used in the various manufacturing processes employed in the pr...

Automotive Manufacturing Processes. Volume I - Overview

DOT National Transportation Integrated Search

1981-02-01

Extensive material substitution and re-sizing of the domestic automotive fleet, as well as the introduction of new technologies, will require major changes in the techniques and equipment used in the various manufacturing processes employed in the pr...

Final Technical Report: Development of an Abrasion-Resistant Antisoiling Coating for Front-Surface Reflectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gee, Randy C.

A high-performance reflective film has been successfully developed for Concentrating Solar Power (CSP) solar concentrators. Anti-soiling properties and abrasion resistance have been incorporated into the reflector to reduce reflector cleaning costs and to enhance durability. This approach has also resulted in higher reflectance and improved specularity. From the outset of this project we focused on the use of established high-volume roll-to-roll manufacturing techniques to achieve low manufacturing costs on a per ubit area basis. Roll-to-roll manufacturng equipment has a high capital cost so there is an entire industry devoted to roll-to-roll “toll” manufacturing, where the equipment is operated “around themore » clock” to produce a multitude of products for a large variety of uses. Using this approach, the reflective film can be manufactured by toll coaters/converters on an as-needed basis.« less

Generic system components of the Thiokol ultrasonic RSRM case-to-insulation bondline inspection system

NASA Technical Reports Server (NTRS)

Cook, M.

1989-01-01

Qualification testing of the Ultrasonic Redesigned Solid Rocket Motor Bondline Inspection Systems (URBIS) was conducted at the Thiokol Nondestructive Evaluation Test Facility M337A and at the Rotation Process Storage Facility at Kennedy Space Center. The test was performed on portions of the URBIS that are generic to redesigned solid rocket motor case-to-insulation bondline inspections. Testing began on Feb. 13, 1989 and was completed on May 26, 1989. The main purpose of the test was to verify that each URBIS performed to the manufacturer's specifications in the same manner and to make any procedural changes necessary for specific redesigned solid rocket motor inspections. All five URBISs passed every stage of the qualification test. Each URBIS is now qualified for use on redesigned solid rocket motors. Verifying the fact that each URBIS obtains and analyzes data in a similar fashion has eliminated concerns about variations in data between the five systems. The following recommendations were made as a result of this test: (1) each URBIS should be located within a stable environment; (2) an electronic preventative maintenance program should be established for each URBIS; (3) when the URBIS is being utilized to perform transducer analysis, the URBIS equipment setting should match the equipment setting noted on the manufacturer-supplied transducer certification sheet; and (4) optimum scan velocities for each inspection technique (clevis, capture feature, pinhole and membrane) should be determined through further testing.

78 FR 42777 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... the transaction: To support the export of U.S. manufactured semiconductor manufacturing equipment to... supports the manufacture of NAND flash semiconductors. To the extent that Ex-Im Bank is reasonably aware... exportation of goods or provision of services by a United States industry. Parties: Principal Supplier...

Fabrication and Optimization of Properties of Polymer Laminated Nanoreinforced Automobile Glasses: Experiments and Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khaleel, Mohammad A.; Sun, Xin; Simmons, Kevin L.

2008-05-01

This paper describes the fabrication process for the thin cast-in-place laminate glazing systems to be used in cars of the future to achieve the weight reduction goals of FreedomCAR. The primary objective of the project is to reduce vehicle weight, improve fuel economy, and reduce vehicle emissions through the use of structurally reliable, high acoustic performance and lightweight glazing systems with low manufacturing costs. Energy savings come from reducing weight by using thinner glazing: prior studies at Pacific Northwest National Laboratory (PNNL) have demonstrated a potential of 30% weight reductions compared with standard glazing system. Energy savings will also comemore » from reducing interior heat loads; that, in turn, will reduce the demand for air conditioning. The evaluation of alternative glazing concepts seek to improve acoustical performance such that reduced interior noise levels can be achieved while maintaining glazing at minimal thickness and weight levels. The most important factor in utilizing laminated glazing systems as vehicle side glass is its advantage in cost savings for material and manufacturing processes. To this end, a new, innovative manufacturing process is developed such that laminated glazing systems can be made with low cost in terms of raw materials and process-related equipment/facility investment.« less

Effects of surfaces and leachables on the stability of biopharmaceuticals.

PubMed

Bee, Jared S; Randolph, Theodore W; Carpenter, John F; Bishop, Steven M; Dimitrova, Mariana N

2011-10-01

Therapeutic proteins are exposed to various potential contact surfaces, particles, and leachables during manufacturing, shipping, storage, and delivery. In this review, we present published examples of interfacial- or leachable-induced aggregation or particle formation, and discuss the mitigation strategies that were successfully utilized. Adsorption to interfaces or interactions with leachables and/or particles in some cases has been reported to cause protein aggregation or particle formation. Identification of the cause(s) of particle formation involving minute amounts of protein over extended periods of time can be challenging. Various formulation strategies such as addition of a nonionic surfactant (e.g., polysorbate) have been demonstrated to effectively mitigate adsorption-induced protein aggregation. However, not all stability problems associated with interfaces or leachables are best resolved by formulation optimization. Detectable leachables do not necessarily have any adverse impact on the protein but control of the leachable source is preferred when there is a concern. In other cases, preventing protein aggregation and particle formation may require manufacturing process and/or equipment changes, use of compatible materials at contact interfaces, and so on. This review summarizes approaches that have been used to minimize protein aggregation and particle formation during manufacturing and fill-finish operations, product storage and transportation, and delivery of protein therapeutics. Copyright © 2011 Wiley-Liss, Inc.

12. VIEW OF THE NONDESTRUCTIVE TESTING EQUIPMENT BEING USED TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. VIEW OF THE NON-DESTRUCTIVE TESTING EQUIPMENT BEING USED TO DETECT FLAWS IN FABRICATED COMPONENTS. (6/76) - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

An infrared procedure for evaluation of wet bath or dry gas calibration.

DOT National Transportation Integrated Search

1996-09-01

The National Highway Traffic Safety Administration maintains Conforming Products Lists for police breath alcohol testing equipment. Equipment submitted by manufacturers for inclusion on the Lists are first evaluated at Volpe National Transportation S...

47 CFR 14.20 - Obligations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... communications services in an accessible format, if achievable. Signal compression technologies shall not remove... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO ADVANCED COMMUNICATIONS SERVICES AND EQUIPMENT... this part, a manufacturer of equipment used for advanced communications services, including end user...

47 CFR 14.20 - Obligations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... communications services in an accessible format, if achievable. Signal compression technologies shall not remove... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO ADVANCED COMMUNICATIONS SERVICES AND EQUIPMENT... this part, a manufacturer of equipment used for advanced communications services, including end user...

47 CFR 14.20 - Obligations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... communications services in an accessible format, if achievable. Signal compression technologies shall not remove... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL ACCESS TO ADVANCED COMMUNICATIONS SERVICES AND EQUIPMENT... this part, a manufacturer of equipment used for advanced communications services, including end user...

Backflushing system rapidly cleans fluid filters

NASA Technical Reports Server (NTRS)

Descamp, V. A.; Boex, M. W.; Hussey, M. W.; Larson, T. P.

1973-01-01

Self contained unit can backflush filter elements in fraction of the time expended by presently used equipment. This innovation may be of interest to manufacturers of hydraulic and pneumatic systems as well as to chemical, food, processing, and filter manufacturing industries.

Automotive Manufacturing Processes. Volume III - Casting and Forging Processes

DOT National Transportation Integrated Search

1981-02-01

Extensive material substitution and resizing of the domestic automotive fleet, as well as the introduction of new technologies, will require major changes in the techniques and equipment used in the various manufacturing processes employed in the pro...

40 CFR 418.11 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Phosphate Subcategory § 418.11 Specialized... including precipitation runoff which, during manufacturing or processing, comes into incidental contact with...) Precipitation runoff; (2) accidental spills; (3) accidental leaks caused by the failure of process equipment and...

40 CFR 418.11 - Specialized definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Phosphate Subcategory § 418.11 Specialized... including precipitation runoff which, during manufacturing or processing, comes into incidental contact with...) Precipitation runoff; (2) accidental spills; (3) accidental leaks caused by the failure of process equipment and...

40 CFR 418.11 - Specialized definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Phosphate Subcategory § 418.11 Specialized... including precipitation runoff which, during manufacturing or processing, comes into incidental contact with...) Precipitation runoff; (2) accidental spills; (3) accidental leaks caused by the failure of process equipment and...

Functionality and operation of fluoroscopic automatic brightness control/automatic dose rate control logic in modern cardiovascular and interventional angiography systems: A Report of Task Group 125 Radiography/Fluoroscopy Subcommittee, Imaging Physics Committee, Science Council

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rauch, Phillip; Lin, Pei-Jan Paul; Balter, Stephen

2012-05-15

Task Group 125 (TG 125) was charged with investigating the functionality of fluoroscopic automatic dose rate and image quality control logic in modern angiographic systems, paying specific attention to the spectral shaping filters and variations in the selected radiologic imaging parameters. The task group was also charged with describing the operational aspects of the imaging equipment for the purpose of assisting the clinical medical physicist with clinical set-up and performance evaluation. Although there are clear distinctions between the fluoroscopic operation of an angiographic system and its acquisition modes (digital cine, digital angiography, digital subtraction angiography, etc.), the scope of thismore » work was limited to the fluoroscopic operation of the systems studied. The use of spectral shaping filters in cardiovascular and interventional angiography equipment has been shown to reduce patient dose. If the imaging control algorithm were programmed to work in conjunction with the selected spectral filter, and if the generator parameters were optimized for the selected filter, then image quality could also be improved. Although assessment of image quality was not included as part of this report, it was recognized that for fluoroscopic imaging the parameters that influence radiation output, differential absorption, and patient dose are also the same parameters that influence image quality. Therefore, this report will utilize the terminology ''automatic dose rate and image quality'' (ADRIQ) when describing the control logic in modern interventional angiographic systems and, where relevant, will describe the influence of controlled parameters on the subsequent image quality. A total of 22 angiography units were investigated by the task group and of these one each was chosen as representative of the equipment manufactured by GE Healthcare, Philips Medical Systems, Shimadzu Medical USA, and Siemens Medical Systems. All equipment, for which measurement data were included in this report, was manufactured within the three year period from 2006 to 2008. Using polymethylmethacrylate (PMMA) plastic to simulate patient attenuation, each angiographic imaging system was evaluated by recording the following parameters: tube potential in units of kilovolts peak (kVp), tube current in units of milliamperes (mA), pulse width (PW) in units of milliseconds (ms), spectral filtration setting, and patient air kerma rate (PAKR) as a function of the attenuator thickness. Data were graphically plotted to reveal the manner in which the ADRIQ control logic responded to changes in object attenuation. There were similarities in the manner in which the ADRIQ control logic operated that allowed the four chosen devices to be divided into two groups, with two of the systems in each group. There were also unique approaches to the ADRIQ control logic that were associated with some of the systems, and these are described in the report. The evaluation revealed relevant information about the testing procedure and also about the manner in which different manufacturers approach the utilization of spectral filtration, pulsed fluoroscopy, and maximum PAKR limitation. This information should be particularly valuable to the clinical medical physicist charged with acceptance testing and performance evaluation of modern angiographic systems.« less

Functionality and operation of fluoroscopic automatic brightness control/automatic dose rate control logic in modern cardiovascular and interventional angiography systems: a report of Task Group 125 Radiography/Fluoroscopy Subcommittee, Imaging Physics Committee, Science Council.

PubMed

Rauch, Phillip; Lin, Pei-Jan Paul; Balter, Stephen; Fukuda, Atsushi; Goode, Allen; Hartwell, Gary; LaFrance, Terry; Nickoloff, Edward; Shepard, Jeff; Strauss, Keith

2012-05-01

Task Group 125 (TG 125) was charged with investigating the functionality of fluoroscopic automatic dose rate and image quality control logic in modern angiographic systems, paying specific attention to the spectral shaping filters and variations in the selected radiologic imaging parameters. The task group was also charged with describing the operational aspects of the imaging equipment for the purpose of assisting the clinical medical physicist with clinical set-up and performance evaluation. Although there are clear distinctions between the fluoroscopic operation of an angiographic system and its acquisition modes (digital cine, digital angiography, digital subtraction angiography, etc.), the scope of this work was limited to the fluoroscopic operation of the systems studied. The use of spectral shaping filters in cardiovascular and interventional angiography equipment has been shown to reduce patient dose. If the imaging control algorithm were programmed to work in conjunction with the selected spectral filter, and if the generator parameters were optimized for the selected filter, then image quality could also be improved. Although assessment of image quality was not included as part of this report, it was recognized that for fluoroscopic imaging the parameters that influence radiation output, differential absorption, and patient dose are also the same parameters that influence image quality. Therefore, this report will utilize the terminology "automatic dose rate and image quality" (ADRIQ) when describing the control logic in modern interventional angiographic systems and, where relevant, will describe the influence of controlled parameters on the subsequent image quality. A total of 22 angiography units were investigated by the task group and of these one each was chosen as representative of the equipment manufactured by GE Healthcare, Philips Medical Systems, Shimadzu Medical USA, and Siemens Medical Systems. All equipment, for which measurement data were included in this report, was manufactured within the three year period from 2006 to 2008. Using polymethylmethacrylate (PMMA) plastic to simulate patient attenuation, each angiographic imaging system was evaluated by recording the following parameters: tube potential in units of kilovolts peak (kVp), tube current in units of milliamperes (mA), pulse width (PW) in units of milliseconds (ms), spectral filtration setting, and patient air kerma rate (PAKR) as a function of the attenuator thickness. Data were graphically plotted to reveal the manner in which the ADRIQ control logic responded to changes in object attenuation. There were similarities in the manner in which the ADRIQ control logic operated that allowed the four chosen devices to be divided into two groups, with two of the systems in each group. There were also unique approaches to the ADRIQ control logic that were associated with some of the systems, and these are described in the report. The evaluation revealed relevant information about the testing procedure and also about the manner in which different manufacturers approach the utilization of spectral filtration, pulsed fluoroscopy, and maximum PAKR limitation. This information should be particularly valuable to the clinical medical physicist charged with acceptance testing and performance evaluation of modern angiographic systems.

Casting technology for manufacturing metal rods from simulated metallic spent fuels

NASA Astrophysics Data System (ADS)

Leeand, Y. S.; Lee, D. B.; Kim, C. K.; Shin, Y. J.; Lee, J. H.

2000-09-01

A uranium metal rod 13.5 mm in diameter and 1,150 mm long was produced from simulated metallic spent fuels with advanced casting equipment using the directional-solidification method. A vacuum casting furnace equipped with a four-zone heater to prevent surface oxidation and the formation of surface shrinkage holes was designed. By controlling the axial temperature gradient of the casting furnace, deformation by the surface shrinkage phenomena was diminished, and a sound rod was manufactured. The cooling behavior of the molten uranium was analyzed using the computer software package MAGMAsoft.

Design and Manufacturing of Composite Tower Structure for Wind Turbine Equipment

NASA Astrophysics Data System (ADS)

Park, Hyunbum

2018-02-01

This study proposes the composite tower design process for large wind turbine equipment. In this work, structural design of tower and analysis using finite element method was performed. After structural design, prototype blade manufacturing and test was performed. The used material is a glass fiber and epoxy resin composite. And also, sand was used in the middle part. The optimized structural design and analysis was performed. The parameter for optimized structural design is weight reduction and safety of structure. Finally, structure of tower will be confirmed by structural test.

78 FR 16358 - Safety Advisory 2013-02; Low-Speed, Wheel-Climb Derailments of Passenger Equipment With “Stiff...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-14

..., Staff Director, Motive Power and Equipment Division, Office of Railroad Safety, FRA, 1200 New Jersey Avenue SE., Washington, DC 20590, telephone (202) 493-6322; or Anna Nassif Winkle, Trial Attorney, Office... studies conducted by the equipment manufacturer and FRA using computer modeling indicate that an uneven...

The Audio-Visual Equipment Directory; Twenty-Second Edition, 1976-1977.

ERIC Educational Resources Information Center

Herickes, Sally, Ed.

Over 2,000 currently available items are listed in the 1976-1977 Audio-Visual Equipment Directory with specifications on price, model, weight, capacity, accessories, and technical details. Charts for screen size, lists of film and tape running times, an index to industry trade names, and a directory of equipment manufacturers are also provided.…

26 CFR 48.4161(a)-1 - Imposition and rate of tax; fishing equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... specified articles of fishing equipment that are designed or constructed for use in the sport of fishing...) imposes a tax on the sale of the following articles of fishing equipment (including in each case parts or accessories of such articles sold on or in connection therewith or with the sale thereof) by the manufacturer...

26 CFR 48.4161(a)-1 - Imposition and rate of tax; fishing equipment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... specified articles of fishing equipment that are designed or constructed for use in the sport of fishing...) imposes a tax on the sale of the following articles of fishing equipment (including in each case parts or accessories of such articles sold on or in connection therewith or with the sale thereof) by the manufacturer...

Design of an automatic production monitoring system on job shop manufacturing

NASA Astrophysics Data System (ADS)

Prasetyo, Hoedi; Sugiarto, Yohanes; Rosyidi, Cucuk Nur

2018-02-01

Every production process requires monitoring system, so the desired efficiency and productivity can be monitored at any time. This system is also needed in the job shop type of manufacturing which is mainly influenced by the manufacturing lead time. Processing time is one of the factors that affect the manufacturing lead time. In a conventional company, the recording of processing time is done manually by the operator on a sheet of paper. This method is prone to errors. This paper aims to overcome this problem by creating a system which is able to record and monitor the processing time automatically. The solution is realized by utilizing electric current sensor, barcode, RFID, wireless network and windows-based application. An automatic monitoring device is attached to the production machine. It is equipped with a touch screen-LCD so that the operator can use it easily. Operator identity is recorded through RFID which is embedded in his ID card. The workpiece data are collected from the database by scanning the barcode listed on its monitoring sheet. A sensor is mounted on the machine to measure the actual machining time. The system's outputs are actual processing time and machine's capacity information. This system is connected wirelessly to a workshop planning application belongs to the firm. Test results indicated that all functions of the system can run properly. This system successfully enables supervisors, PPIC or higher level management staffs to monitor the processing time quickly with a better accuracy.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Eric J

The ResStock analysis tool is helping states, municipalities, utilities, and manufacturers identify which home upgrades save the most energy and money. Across the country there's a vast diversity in the age, size, construction practices, installed equipment, appliances, and resident behavior of the housing stock, not to mention the range of climates. These variations have hindered the accuracy of predicting savings for existing homes. Researchers at the National Renewable Energy Laboratory (NREL) developed ResStock. It's a versatile tool that takes a new approach to large-scale residential energy analysis by combining: large public and private data sources, statistical sampling, detailed subhourly buildingmore » simulations, high-performance computing. This combination achieves unprecedented granularity and most importantly - accuracy - in modeling the diversity of the single-family housing stock.« less

Organic solvents in the pharmaceutical industry.

PubMed

Grodowska, Katarzyna; Parczewski, Andrzej

2010-01-01

Organic solvents are commonly used in the pharmaceutical industry as reaction media, in separation and purification of synthesis products and also for cleaning of equipment. This paper presents some aspects of organic solvents utilization in an active pharmaceutical ingredient and a drug product manufacturing process. As residual solvents are not desirable substances in a final product, different methods for their removal may be used, provided they fulfill safety criteria. After the drying process, analyses need to be performed to check if amounts of solvents used at any step of the production do not exceed acceptable limits (taken from ICH Guideline or from pharmacopoeias). Also new solvents like supercritical fluids or ionic liquids are developed to replace "traditional" organic solvents in the pharmaceutical production processes.

Using input command pre-shaping to suppress multiple mode vibration

NASA Technical Reports Server (NTRS)

Hyde, James M.; Seering, Warren P.

1990-01-01

Spacecraft, space-borne robotic systems, and manufacturing equipment often utilize lightweight materials and configurations that give rise to vibration problems. Prior research has led to the development of input command pre-shapers that can significantly reduce residual vibration. These shapers exhibit marked insensitivity to errors in natural frequency estimates and can be combined to minimize vibration at more than one frequency. This paper presents a method for the development of multiple mode input shapers which are simpler to implement than previous designs and produce smaller system response delays. The new technique involves the solution of a group of simultaneous non-linear impulse constraint equations. The resulting shapers were tested on a model of MACE, an MIT/NASA experimental flexible structure.

What Fleets Need to Know About Alternative Fuel Vehicle Conversions, Retrofits, and Repowers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, Kay L.; Gonzales, John

2017-10-17

Many fleet managers have opted to incorporate alternative fuels and advanced vehicles into their lineup. Original equipment manufacturers (OEMs) offer a variety of choices, and there are additional options offered by aftermarket companies. There are also a myriad of ways that existing vehicles can be modified to utilize alternative fuels and other advanced technologies. Vehicle conversions and retrofit packages, along with engine repower options, can offer an ideal way to lower vehicle operating costs. This can result in long term return on investment, in addition to helping fleet managers achieve emissions and environmental goals. This report summarizes the various factorsmore » to consider when pursuing a conversion, retrofit, or repower option.« less

40 CFR 60.634 - Alternative means of emission limitation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... any design, equipment, work practice or operational standard, the Administrator will publish, in the... the design, equipment, work practice or operational standard. ... applications under this section from either owners or operators of affected facilities, or manufacturers of...

40 CFR 1039.130 - What installation instructions must I give to equipment manufacturers?

Code of Federal Regulations, 2010 CFR

2010-07-01

... information label hard to read during normal engine maintenance, you must place a duplicate label on the... own equipment. (d) Provide instructions in writing or in an equivalent format. For example, you may...

Fault isolation techniques

NASA Technical Reports Server (NTRS)

Dumas, A.

1981-01-01

Three major areas that are considered in the development of an overall maintenance scheme of computer equipment are described. The areas of concern related to fault isolation techniques are: the programmer (or user), company and its policies, and the manufacturer of the equipment.

40 CFR 91.322 - Calibration of other equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Calibration of other equipment. 91.322 Section 91.322 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... manufacturer or as necessary according to good engineering practice. ...

Protocol for Usability Testing and Validation of the ISO Draft International Standard 19223 for Lung Ventilators

PubMed Central

2017-01-01

Background Clinicians, such as respiratory therapists and physicians, are often required to set up pieces of medical equipment that use inconsistent terminology. Current lung ventilator terminology that is used by different manufacturers contributes to the risk of usage errors, and in turn the risk of ventilator-associated lung injuries and other conditions. Human factors and communication issues are often associated with ventilator-related sentinel events, and inconsistent ventilator terminology compounds these issues. This paper describes our proposed protocol, which will be implemented at the University of Waterloo, Canada when this project is externally funded. Objective We propose to determine whether a standardized vocabulary improves the ease of use, safety, and utility as it relates to the usability of medical devices, compared to legacy medical devices from multiple manufacturers, which use different terms. Methods We hypothesize that usage errors by clinicians will be lower when standardization is consistently applied by all manufacturers. The proposed study will experimentally examine the impact of standardized nomenclature on performance declines in the use of an unfamiliar ventilator product in clinically relevant scenarios. Participants will be respiratory therapy practitioners and trainees, and we propose studying approximately 60 participants. Results The work reported here is in the proposal phase. Once the protocol is implemented, we will report the results in a follow-up paper. Conclusions The proposed study will help us better understand the effects of standardization on medical device usability. The study will also help identify any terms in the International Organization for Standardization (ISO) Draft International Standard (DIS) 19223 that may be associated with recurrent errors. Amendments to the standard will be proposed if recurrent errors are identified. This report contributes a protocol that can be used to assess the effect of standardization in any given domain that involves equipment, multiple manufacturers, inconsistent vocabulary, symbology, audio tones, or patterns in interface navigation. Second, the protocol can be used to experimentally evaluate the ISO DIS 19223 for its effectiveness, as researchers around the world may wish to conduct such tests and compare results. PMID:28887292

Copiers and Duplicators for Audio Tape Cassettes: Criteria for Selection, Laboratory Test Findings, Manufacturers' Data Reports. EPIE Report: Number 84e.

ERIC Educational Resources Information Center

Educational Products Information Exchange Inst., Stony Brook, NY.

Because needs for cassette duplication equipment differ, the user must match his requirements to the capabilities of manufactured products, and the essential product characteristics. To help educators in choosing cassette duplicators, EPIE has gathered data from manufacturers and tested 11 units. The first section of the report explains the…

Analysis of edible oil processing options for the BIO-Plex advanced life support system

NASA Technical Reports Server (NTRS)

Greenwalt, C. J.; Hunter, J.

2000-01-01

Edible oil is a critical component of the proposed plant-based Advanced Life Support (ALS) diet. Soybean, peanut, and single-cell oil are the oil source options to date. In terrestrial manufacture, oil is ordinarily extracted with hexane, an organic solvent. However, exposed solvents are not permitted in the spacecraft environment or in enclosed human tests by National Aeronautics and Space Administration due to their potential danger and handling difficulty. As a result, alternative oil-processing methods will need to be utilized. Preparation and recovery options include traditional dehulling, crushing, conditioning, and flaking, extrusion, pressing, water extraction, and supercritical extraction. These processing options were evaluated on criteria appropriate to the Advanced Life Support System and BIO-Plex application including: product quality, product stability, waste production, risk, energy needs, labor requirements, utilization of nonrenewable resources, usefulness of by-products, and versatility and mass of equipment to determine the most appropriate ALS edible oil-processing operation.

Flywheel Energy Storage Technology Workshop

NASA Astrophysics Data System (ADS)

Okain, D.; Howell, D.

Advances in recent years of high strength/lightweight materials, high performance magnetic bearings, and power electronics technology has spurred a renewed interest by the transportation, utility, and manufacturing industries in flywheel energy storage (FES) technologies. FES offers several advantages over conventional electrochemical energy storage, such as high specific energy and specific power, fast charging time, long service life, high turnaround efficiency (energy out/energy in), and no hazardous/toxic materials or chemicals are involved. Potential applications of FES units include power supplies for hybrid and electric vehicles, electric vehicle charging stations, space systems, and pulsed power devices. Also, FES units can be used for utility load leveling, uninterruptable power supplies to protect electronic equipment and electrical machinery, and for intermittent wind or photovoltaic energy sources. The purpose of this workshop is to provide a forum to highlight technologies that offer a high potential to increase the performance of FES systems and to discuss potential solutions to overcome present FES application barriers. This document consists of viewgraphs from 27 presentations.

Review of bilayer tablet technology.

PubMed

Abebe, Admassu; Akseli, Ilgaz; Sprockel, Omar; Kottala, Niranjan; Cuitiño, Alberto M

2014-01-30

Therapeutic strategies based on oral delivery of bilayer (and multilayer) tablets are gaining more acceptance among brand and generic products due to a confluence of factors including advanced delivery strategies, patient compliance and combination therapy. Successful manufacturing of these ever more complex systems needs to overcome a series of challenges from formulation design to tablet press monitoring and control. This article provides an overview of the state-of-the-art of bilayer tablet technology, highlighting the main benefits of this type of oral dosage forms while providing a description of current challenges and advances toward improving manufacturing practices and product quality. Several aspects relevant to bilayer tablet manufacturing are addressed including material properties, lubrication, layer ordering, layer thickness, layer weight control, as well as first and final compression forces. A section is also devoted to bilayer tablet characterization that present additional complexities associated with interfaces between layers. The available features of the manufacturing equipment for bilayer tablet production are also described indicating the different strategies for sensing and controls offered by bilayer tablet press manufacturers. Finally, a roadmap for bilayer tablet manufacturing is advanced as a guideline to formulation design and selection of process parameters and equipment. Copyright © 2013 Elsevier B.V. All rights reserved.

Automotive Manufacturing Processes. Volume IV - Metal Stamping and Plastic Forming Processes

DOT National Transportation Integrated Search

1981-02-01

Extensive material substitution and resizing of the domestic automotive fleet, as well as the introduction of new technologies, will require major changes in the techniques and equipment used in the various manufacturing processes employed in the pro...

40 CFR 415.381 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... process wastewater means any water which, during manufacturing or processing, comes into direct contact... wastewater. (d) The term contaminated nonprocess wastewater shall mean any water which, during manufacturing...) accidental leaks caused by the failure of process equipment, which are repaired within the shortest...

77 FR 69823 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

... application equipment manufacturers, chemical manufacturers, pesticide registrants, university researchers... Production 111 Research and Development in the Physical, Engineering, Life 541710 Sciences Colleges... drift reducing adjuvant chemicals used for aerial or groundboom applications to row and field crops...

Advanced radiator concepts utilizing honeycomb panel heat pipes

NASA Technical Reports Server (NTRS)

Fleischman, G. L.; Peck, S. J.; Tanzer, H. J.

1987-01-01

The feasibility of fabricating and processing moderate temperature range vapor chamber type heat pipes in a low mass honeycomb panel configuration for highly efficient radiator fins for potential use on the space station was investigated. A variety of honeycomb panel facesheet and core-ribbon wick concepts were evaluated within constraints dictated by existing manufacturing technology and equipment. Concepts evaluated include type of material, material and panel thickness, wick type and manufacturability, liquid and vapor communication among honeycomb cells, and liquid flow return from condenser to evaporator facesheet areas. A thin-wall all-welded stainless steel design with methanol as the working fluid was the initial prototype unit. It was found that an aluminum panel could not be fabricated in the same manner as a stainless steel panel due to diffusion bonding and resistance welding considerations. Therefore, a formed and welded design was developed. The prototype consists of ten panels welded together into a large panel 122 by 24 by 0.15 in., with a heat rejection capability of 1000 watts and a fin efficiency of essentially 1.0.

Contamination-Free Manufacturing: Tool Component Qualification, Verification and Correlation with Wafers

NASA Astrophysics Data System (ADS)

Tan, Samantha H.; Chen, Ning; Liu, Shi; Wang, Kefei

2003-09-01

As part of the semiconductor industry "contamination-free manufacturing" effort, significant emphasis has been placed on reducing potential sources of contamination from process equipment and process equipment components. Process tools contain process chambers and components that are exposed to the process environment or process chemistry and in some cases are in direct contact with production wafers. Any contamination from these sources must be controlled or eliminated in order to maintain high process yields, device performance, and device reliability. This paper discusses new nondestructive analytical methods for quantitative measurement of the cleanliness of metal, quartz, polysilicon and ceramic components that are used in process equipment tools. The goal of these new procedures is to measure the effectiveness of cleaning procedures and to verify whether a tool component part is sufficiently clean for installation and subsequent routine use in the manufacturing line. These procedures provide a reliable "qualification method" for tool component certification and also provide a routine quality control method for reliable operation of cleaning facilities. Cost advantages to wafer manufacturing include higher yields due to improved process cleanliness and elimination of yield loss and downtime resulting from the installation of "bad" components in process tools. We also discuss a representative example of wafer contamination having been linked to a specific process tool component.

High efficiency diffraction grating technologies LPDL 900 and LPDL 1100 in telecommunications applications

NASA Astrophysics Data System (ADS)

Milner, Darrin; Didona, Kevin; Bannon, David

2005-04-01

With the introduction of wavelength division multiplexing and dense wavelength division multiplexing, equipment manufactures have sought to reduce design tradeoffs and costs while maintaining or increasing their product performance. With the need to reduce if not eliminate optical losses and create the all light path from source to destination, equipment manufactures are addressing the concerns of component manufactures to provide increased performance to support configurable designs for 100, 50, and eventually 12.5GHz. One of the most reliable, robust, and high performance devices is the low polarization dependent loss (LPDL) diffraction grating used to disperse wavelengths for channel blocking, add/drop functionality and real time light path reconfigurations. The networks today have a variety of factors which contribute to the optical loss budget and impact system design cost, facility requirements, maintenance or replacement costs. These factors include first and second order polarization mode dispersion (PMD), polarization dependent loss (PDL), wavelength dependent losses, and chromatic dispersion (CD). Network designers and equipment manufactures have to consider each component capability and its impact to the systems bit error rate (BER). In order to gain an understanding of the advantages of components with low polarization dependency, we will summarize the effects that interplay with these types of components.

Recovery Act: Brea California Combined Cycle Electric Generating Plant Fueled by Waste Landfill Gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galowitz, Stephen

The primary objective of the Project was to maximize the productive use of the substantial quantities of waste landfill gas generated and collected at the Olinda Landfill near Brea, California. An extensive analysis was conducted and it was determined that utilization of the waste gas for power generation in a combustion turbine combined cycle facility was the highest and best use. The resulting Project reflected a cost effective balance of the following specific sub-objectives: • Meeting the environmental and regulatory requirements, particularly the compliance obligations imposed on the landfill to collect, process and destroy landfill gas • Utilizing proven andmore » reliable technology and equipment • Maximizing electrical efficiency • Maximizing electric generating capacity, consistent with the anticipated quantities of landfill gas generated and collected at the Olinda Landfill • Maximizing equipment uptime • Minimizing water consumption • Minimizing post-combustion emissions • The Project produced and will produce a myriad of beneficial impacts. o The Project created 360 FTE construction and manufacturing jobs and 15 FTE permanent jobs associated with the operation and maintenance of the plant and equipment. o By combining state-of-the-art gas clean up systems with post combustion emissions control systems, the Project established new national standards for best available control technology (BACT). o The Project will annually produce 280,320 MWh’s of clean energy o By destroying the methane in the landfill gas, the Project will generate CO2 equivalent reductions of 164,938 tons annually. The completed facility produces 27.4 MWnet and operates 24 hours a day, seven days a week.« less

Food equipment manufacturer takes a slice out of its scrap rate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernard, D.; Hannahs, J.; Carter, M.

1996-09-01

The PMI Food Equipment Group began manufacturing circular slicer knives for its commercial Hobart line of slicers in the early 1930s. The company manufacturers the only cast knife in the food industry. The cast knives offer superior edge retention and overall corrosion resistance. The slicer knives are cast in PMI`s foundry. The casting process sometimes produces shrinkage voids or gas bubbles in the knife blank. Surface discontinuities often do not appear until rough cutting or final machining, i.e., after several hours of value-added manufacturing. Knife blanks with these discontinuities were scrapped and sent back to the foundry for remelting. Tomore » scrap the knives at that point meant the cost for casting plus the value-added machining added up to a considerable amount. Weld repair allows the recovery of casting and machining expenses equal to a significant percentage of the total manufacturing cost of slicer knives. Repair costs include welding, grinding, shipping, surface finishing and material handling. Other good applications for this GMAW-P process include repair of jet engine components, rotating process industry equipment, and hardfacing of cutting tools and dies. In addition, dissimilar metals and any material that is heat treated to develop its properties such as precision investment castings are excellent applications. The low resultant distortion, elimination of postweld heat treatment and non-line-of-site welding capability solves thin wall, limited access and precision machined component repair challenges.« less

Case study project: The use of low-VOC/HAP coatings at wood furniture manufacturing facilities. Report for March 1995--March 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, A.M.; Jones, J.W.; Fields, J.L.

1999-07-01

The paper discusses a study of pollution prevention and the use of low-VOC/HAP (volatile organic compound/hazardous air pollutant) coatings at wood furniture manufacturing facilities. The study is to identify wood furniture and cabinet manufacturing facilities that have converted to low-VOC/HAP coatings and to develop case studies for those facilities. The case studies include a discussion of the types of products each facility manufactures; the types of low-VOC/HAP coatings each facility is using; problems encountered in converting to low-VOC/HAP coatings; equipment changes that were required; costs associated with the conversion process, including capital costs associated with equipment purchases, research and developmentmore » costs, and operating costs such as operator training in new application techniques;advantages/ disadvantages of the low-VOC/HAP coatings; and customer feedback on products finished with the low-VOC/HAP coatings. The paper discusses the progress of the study and pollution prevention options at wood furniture manufacturing facilities.« less

AUTOMATING ASSET KNOWLEDGE WITH MTCONNECT

PubMed Central

Venkatesh, Sid; Ly, Sidney; Manning, Martin; Michaloski, John; Proctor, Fred

2017-01-01

In order to maximize assets, manufacturers should use real-time knowledge garnered from ongoing and continuous collection and evaluation of factory-floor machine status data. In discrete parts manufacturing, factory machine monitoring has been difficult, due primarily to closed, proprietary automation equipment that make integration difficult. Recently, there has been a push in applying the data acquisition concepts of MTConnect to the real-time acquisition of machine status data. MTConnect is an open, free specification aimed at overcoming the “Islands of Automation” dilemma on the shop floor. With automated asset analysis, manufacturers can improve production to become lean, efficient, and effective. The focus of this paper will be on the deployment of MTConnect to collect real-time machine status to automate asset management. In addition, we will leverage the ISO 22400 standard, which defines an asset and quantifies asset performance metrics. In conjunction with these goals, the deployment of MTConnect in a large aerospace manufacturing facility will be studied with emphasis on asset management and understanding the impact of machine Overall Equipment Effectiveness (OEE) on manufacturing. PMID:28691121

40 CFR 60.16 - Priority list.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Categories Priority Number 1 Source Category 1. Synthetic Organic Chemical Manufacturing Industry (SOCMI) and Volatile Organic Liquid Storage Vessels and Handling Equipment (a) SOCMI unit processes (b) Volatile organic liquid (VOL) storage vessels and handling equipment (c) SOCMI fugitive sources (d) SOCMI secondary...

The Telecommunications Industry; Integration Vs. Competition.

ERIC Educational Resources Information Center

Irwin, Manley R.

Vertical integration stands as the salient structural configuration of the telecommunications equipment market. Computer hardware manufacturers are obviously potential competitors with the captive telecommunications equipment suppliers. Direct government policies, such as patents and a permissive attitude toward mergers, and indirect policies,…

40 CFR 761.366 - Cleanup equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Cleanup equipment. 761.366 Section 761.366 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT POLYCHLORINATED BIPHENYLS (PCBs) MANUFACTURING, PROCESSING, DISTRIBUTION IN COMMERCE, AND USE PROHIBITIONS Double...

7 CFR 1753.68 - Purchasing special equipment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... operating systems to increase system capacity that require components made by the manufacturer of the... operating systems in the borrower's system, or with complete systems of special equipment from other... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

7 CFR 1753.68 - Purchasing special equipment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... operating systems to increase system capacity that require components made by the manufacturer of the... operating systems in the borrower's system, or with complete systems of special equipment from other... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

7 CFR 1753.68 - Purchasing special equipment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... operating systems to increase system capacity that require components made by the manufacturer of the... operating systems in the borrower's system, or with complete systems of special equipment from other... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

7 CFR 1753.68 - Purchasing special equipment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... operating systems to increase system capacity that require components made by the manufacturer of the... operating systems in the borrower's system, or with complete systems of special equipment from other... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

7 CFR 1753.68 - Purchasing special equipment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... operating systems to increase system capacity that require components made by the manufacturer of the... operating systems in the borrower's system, or with complete systems of special equipment from other... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

Operations & Maintenance Best Practices - A Guide to Achieving Operational Efficiency (Release 3)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, Greg; Pugh, Ray; Melendez, Aldo P.

This guide highlights operations and maintenance programs targeting energy and water efficiency that are estimated to save 5% to 20% on energy bills without a significant capital investment. The purpose of this guide is to provide you, the Operations and Maintenance (O&M)/Energy manager and practitioner, with useful information about O&M management, technologies, energy and water efficiency, and cost-reduction approaches. To make this guide useful and to reflect your needs and concerns, the authors met with O&M and Energy managers via Federal Energy Management Program (FEMP) workshops. In addition, the authors conducted extensive literature searches and contacted numerous vendors and industrymore » experts. The information and case studies that appear in this guide resulted from these activities. It needs to be stated at the outset that this guide is designed to provide information on effective O&M as it applies to systems and equipment typically found at Federal facilities. This guide is not designed to provide the reader with step-by-step procedures for performing O&M on any specific piece of equipment. Rather, this guide first directs the user to the manufacturer's specifications and recommendations. In no way should the recommendations in this guide be used in place of manufacturer's recommendations. The recommendations in this guide are designed to supplement those of the manufacturer, or, as is all too often the case, provide guidance for systems and equipment for which all technical documentation has been lost. As a rule, this guide will first defer to the manufacturer's recommendations on equipment operation and maintenance.« less

Planning for the semiconductor manufacturer of the future

NASA Technical Reports Server (NTRS)

Fargher, Hugh E.; Smith, Richard A.

1992-01-01

Texas Instruments (TI) is currently contracted by the Air Force Wright Laboratory and the Defense Advanced Research Projects Agency (DARPA) to develop the next generation flexible semiconductor wafer fabrication system called Microelectronics Manufacturing Science & Technology (MMST). Several revolutionary concepts are being pioneered on MMST, including the following: new single-wafer rapid thermal processes, in-situ sensors, cluster equipment, and advanced Computer Integrated Manufacturing (CIM) software. The objective of the project is to develop a manufacturing system capable of achieving an order of magnitude improvement in almost all aspects of wafer fabrication. TI was awarded the contract in Oct., 1988, and will complete development with a fabrication facility demonstration in April, 1993. An important part of MMST is development of the CIM environment responsible for coordinating all parts of the system. The CIM architecture being developed is based on a distributed object oriented framework made of several cooperating subsystems. The software subsystems include the following: process control for dynamic control of factory processes; modular processing system for controlling the processing equipment; generic equipment model which provides an interface between processing equipment and the rest of the factory; specification system which maintains factory documents and product specifications; simulator for modelling the factory for analysis purposes; scheduler for scheduling work on the factory floor; and the planner for planning and monitoring of orders within the factory. This paper first outlines the division of responsibility between the planner, scheduler, and simulator subsystems. It then describes the approach to incremental planning and the way in which uncertainty is modelled within the plan representation. Finally, current status and initial results are described.

21 CFR 225.20 - Buildings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CURRENT GOOD MANUFACTURING PRACTICE FOR MEDICATED FEEDS Construction and Maintenance of Facilities and Equipment § 225.20 Buildings. (a) The location, design, construction, and physical size of the buildings and other production facilities are factors important to the manufacture of medicated feed. The features of...

50 CFR 260.102 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., packaging, or storing any processed products or any ingredients used in the manufacture or production thereof, shall be of such design, material, and construction as will: (a) Enable the examination... with Good Manufacturing Practice Regulations, 21 CFR part 128. [36 FR 21041, Nov. 3, 1971] ...

40 CFR 205.168-1 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycle Exhaust Systems § 205.168-1 General requirements. (a) Each manufacturer of motorcycle exhaust systems manufactured for Federally regulated... exhaust system in accordance with the requirements of § 205.169 of this subpart; and (2) Must only...

40 CFR 415.411 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... wastewater means any water which, during manufacturing or processing, comes into direct contact with or... wastewater. (d) The term contaminated nonprocess wastewater shall mean any water which, during manufacturing...) accidental leaks caused by the failure of process equipment, which are repaired within the shortest...

40 CFR 415.401 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... wastewater means any water which, during manufacturing or processing, comes into direct contact with or... wastewater. (d) The term contaminated nonprocess wastewater shall mean any water which, during manufacturing... leaks caused by the failure of process equipment, which are repaired within the shortest reasonable time...

10 CFR 431.197 - Manufacturer's determination of efficiency for distribution transformers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... distribution transformers. 431.197 Section 431.197 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Compliance and Enforcement § 431.197 Manufacturer's determination of efficiency for distribution transformers. When a...

40 CFR 63.5790 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2010 CFR

2010-07-01

... CATEGORIES National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic Composites... subpart applies to each new or existing affected source at reinforced plastic composites production...) manufacturing, mixing, cleaning of equipment used in reinforced plastic composites manufacture, HAP-containing...

Five years' experience in a (really) rural teleradiology practice. Was it worth it? The successes and the failures

NASA Astrophysics Data System (ADS)

Telepak, Robert J.; Freede, Emily; Jaramillo, Richard E.; Alverson, Dale C.

1998-07-01

During the past 5 years (1992 - 1997) the Department of Radiology of the University of New Mexico Health Sciences Center has developed an active teleradiology program. Contracts are in place to provide both routine and emergency image interpretations 24 hours per day, every day of the year. Several rural hospitals are served as well as the Navajo Indian Health Service. Areas of success: include significantly improved radiologic service to the rural sites, specialty consultations to general radiologists, successful teaching of teleradiology practice to radiology residents and staff, good diagnostic quality images, a small but real profit, improved quality assurance for the rural sites, and no significant medical-legal problems. Failures include: significant telecommunications problems, lack of acceptance and utilization by some of the rural sites, poor QA compliance by some sites, a long period of disappointing technical support by equipment vendors, and slow acceptance of DICOM by equipment manufacturers. The successes outweigh the failures. We would do it again -- but somewhat differently. We offer advice to institutions developing a new rural teleradiology operation.

Tractor seating for operators with paraplegia.

PubMed

Wilhite, C S; Field, W E; Jaramillo, M

2017-01-01

This feasibility study explored the utility of using a pressure mapping instrument to explore the variable of pressure under subjects sitting on a commonly used tractor seat, and four other cushion interventions. The research model used single-subject with repeated measures during simulated tractor operation. In examining the graphical images and pressure mapping data available from the instrument; the contour tractor seat used in this study was not sufficient in redistributing pressure for people with paraplegia operating tractors, putting them at greater risk for acquiring a pressure ulcer. The use of pressure mapping equipment to study seated pressure within dynamic environments is achievable, and further studies need to be performed and replicated in simulated or in vivo environments. The data in this study suggest people with paraplegia operating agricultural equipment may not have acceptable pressure distribution using the manufacturer's installed seat and must rely on adding wheelchair cushions or other materials to the seat surface to create acceptable pressure distribution. However, doing so changes other aspects of the seating micro or macro climate that can also be problematic.

47 CFR 74.851 - Certification of equipment; prohibition on manufacture, import, sale, lease, offer for sale or...

Code of Federal Regulations, 2011 CFR

2011-10-01

... Band; labeling for 700 MHz band equipment destined for non-U.S. markets; disclosure for the core TV...; labeling for 700 MHz band equipment destined for non-U.S. markets; disclosure for the core TV bands. (a... low power auxiliary stations that operate in the core TV bands (channels 2-51, excluding channel 37...

E-waste management and sustainability: a case study in Brazil.

PubMed

Azevedo, Luís Peres; da Silva Araújo, Fernando Gabriel; Lagarinhos, Carlos Alberto Ferreira; Tenório, Jorge Alberto Soares; Espinosa, Denise Crocce Romano

2017-11-01

The advancement of technology and development of new electronic and electrical equipment with a reduced life cycle has increased the need for the disposal of them (called Waste of Electric and Electronic Equipment or simply e-waste) due to defects presented during use, replacement of obsolete equipment, and ease of acquisition of new equipment. There is a lack of consumer awareness regarding the use, handling storage, and disposal of this equipment. In Brazil, the disposal of post-consumer waste is regulated by the National Solid Waste Policy, established by Law No. 12305 and regulated on the 23rd December 2010. Under this legislation, manufacturers and importers are required to perform a project for the Reverse Logistics of e-waste, though its implementation is not well defined. This work focuses on the verification of the sustainability of reverse logistics suggested by the legislation and the mandatory points, evaluating its costs and the possible financial gain with recycling of the waste. The management of reverse logistics and recycling of waste electrical and electronic equipment, or simply recycling of e-waste, as suggested by the government, will be the responsibility of the managing organization to be formed by the manufacturers/importers in Brazil.

The technology base for agile manufacturing

NASA Technical Reports Server (NTRS)

Brost, R. C.; Strip, D. R.; Eicker, P. J.

1993-01-01

The effective use of information is a critical problem faced by manufacturing organizations that must respond quickly to market changes. As product runs become shorter, rapid and efficient development of product manufacturing facilities becomes crucial to commercial success. Effective information utilization is a key element to successfully meeting these requirements. This paper reviews opportunities for developing technical solutions to information utilization problems within a manufacturing enterprise and outlines a research agenda for solving these problems.

Capacity of dental equipment to interfere with cardiac implantable electrical devices.

PubMed

Lahor-Soler, Eduard; Miranda-Rius, Jaume; Brunet-Llobet, Lluís; Sabaté de la Cruz, Xavier

2015-06-01

Patients with cardiac implantable electrical devices should take precautions when exposed to electromagnetic fields. Possible interference as a result of proximity to electromagnets or electricity flow from electronic tools employed in clinical odontology remains controversial. The objective of this study was to examine in vitro the capacity of dental equipment to provoke electromagnetic interference in pacemakers and implantable cardioverter defibrillators. Six electronic dental instruments were tested on three implantable cardioverter defibrillators and three pacemakers from different manufacturers. A simulator model, submerged in physiological saline, with elements that reproduced life-size anatomic structures was used. The instruments were analyzed at differing distances and for different time periods of application. The dental instruments studied displayed significant differences in their capacity to trigger electromagnetic interference. Significant differences in the quantity of registered interference were observed with respect to the variables manufacturer, type of cardiac implant, and application distance but not with the variable time of application. The electronic dental equipment tested at a clinical application distance (20 cm) provoked only slight interference in the pacemakers and implantable cardioverter defibrillators employed, irrespective of manufacturer. © 2015 Eur J Oral Sci.

Assessment of Intelligent Processing Equipment in the National Aeronautics and Space Administration, 1991

NASA Technical Reports Server (NTRS)

Jones, C. S.

1992-01-01

Summarized here is an assessment of intelligent processing equipment (IPE) within NASA. An attempt is made to determine the state of IPE development and research in specific areas where NASA might contribute to the national capability. Mechanisms to transfer NASA technology to the U.S. private sector in this critical area are discussed. It was concluded that intelligent processing equipment is finding extensive use in the manufacture of space hardware, especially in the propulsion components of the shuttle. The major benefits are found in improved process consistency, which lowers cost as it reduces rework. Advanced feedback controls are under development and being implemented gradually into shuttle manufacturing. Implementation is much more extensive in new programs, such as in the advanced solid rocket motor and the Space Station Freedom.

Uncertainty in the analysis of the overall equipment effectiveness on the shop floor

NASA Astrophysics Data System (ADS)

Rößler, M. P.; Abele, E.

2013-06-01

In this article an approach will be presented which supports transparency regarding the effectiveness of manufacturing equipment by combining the fuzzy set theory with the method of the overall equipment effectiveness analysis. One of the key principles of lean production and also a fundamental task in production optimization projects is the prior analysis of the current state of a production system by the use of key performance indicators to derive possible future states. The current state of the art in overall equipment effectiveness analysis is usually performed by cumulating different machine states by means of decentralized data collection without the consideration of uncertainty. In manual data collection or semi-automated plant data collection systems the quality of derived data often diverges and leads optimization teams to distorted conclusions about the real optimization potential of manufacturing equipment. The method discussed in this paper is to help practitioners to get more reliable results in the analysis phase and so better results of optimization projects. Under consideration of a case study obtained results are discussed.

Combat Ration Network for Technology Implementation (CORANET II) Knurled Seal Heat Bar

DTIC Science & Technology

2010-08-01

bench top comparison of ultrasonic sealing technology that included the participation of five ultrasonic sealing equipment manufacturers . Project...packaging journals • On-line web search yielded no useful research results • Contact with machine manufactures produced anecdotal evidence of improved...seal characteristics without documentation or research results • One manufacturer suggested rounded seal bars or seal rubbers for improved sealing

40 CFR 60.4247 - What parts of the mobile source provisions apply to me if I am a manufacturer of stationary SI...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false What parts of the mobile source provisions apply to me if I am a manufacturer of stationary SI internal combustion engines or a manufacturer of equipment containing such engines? 60.4247 Section 60.4247 Protection of Environment ENVIRONMENTAL...

Multi-dimension and Comprehensive Assessment on the Utilizing and Sharing of Regional Large-Scale Scientific Equipment

PubMed Central

Li, Chen; Yongbo, Lv; Chi, Chen

2015-01-01

Based on the data from 30 provincial regions in China, an assessment and empirical analysis was carried out on the utilizing and sharing of the large-scale scientific equipment with a comprehensive assessment model established on the three dimensions, namely, equipment, utilization and sharing. The assessment results were interpreted in light of relevant policies. The results showed that on the whole, the overall development level in the provincial regions in eastern and central China is higher than that in western China. This is mostly because of the large gap among the different provincial regions with respect to the equipped level. But in terms of utilizing and sharing, some of the Western provincial regions, such as Ningxia, perform well, which is worthy of our attention. Policy adjustment targeting at the differentiation, elevation of the capacity of the equipment management personnel, perfection of the sharing and cooperation platform, and the promotion of the establishment of open sharing funds, are all important measures to promote the utilization and sharing of the large-scale scientific equipment and to narrow the gap among different regions. PMID:25937850

47 CFR 10.530 - Common vibration cadence.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Common vibration cadence. 10.530 Section 10.530 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL MOBILE ALERT SYSTEM Equipment Requirements § 10.530 Common vibration cadence. A Participating CMS Provider and equipment manufacturers may only...

47 CFR 18.207 - Technical report.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT... the application. (c) The full name and mailing address of the manufacturer of the device and/or applicant filing for the equipment authorization. (d) The FCC Identifier, trade name(s), and/or model number...

47 CFR 18.207 - Technical report.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT... the application. (c) The full name and mailing address of the manufacturer of the device and/or applicant filing for the equipment authorization. (d) The FCC Identifier, trade name(s), and/or model number...

21 CFR 1020.32 - Fluoroscopic equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... Radiation therapy simulation systems shall be exempt from this requirement provided the systems are intended... 10, 2006, other than radiation therapy simulation systems, the following applies: (A) Neither the... fluoroscopic equipment manufactured on or after June 10, 2006, other than radiation therapy simulation systems...

Calling for help. Using outside parties for equipment servicing.

PubMed

2011-03-01

You may be thinking about having your equipment servicing done by the device manufacturer, or contracting with an independent servicing organization. Each choice presents its own set of issues to consider. Here's what you need to know when weighing the options.

40 CFR 82.160 - Approved equipment testing organizations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.160 Approved.... The application shall be mailed to: Section 608 Recycling Program Manager; Global Programs Division... verifying the performance of certified recycling and recovery equipment manufactured over the long term...

40 CFR 82.160 - Approved equipment testing organizations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.160 Approved.... The application shall be mailed to: Section 608 Recycling Program Manager; Global Programs Division... verifying the performance of certified recycling and recovery equipment manufactured over the long term...

40 CFR 82.160 - Approved equipment testing organizations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.160 Approved.... The application shall be mailed to: Section 608 Recycling Program Manager; Global Programs Division... verifying the performance of certified recycling and recovery equipment manufactured over the long term...

40 CFR 82.160 - Approved equipment testing organizations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.160 Approved.... The application shall be mailed to: Section 608 Recycling Program Manager; Global Programs Division... verifying the performance of certified recycling and recovery equipment manufactured over the long term...

40 CFR 82.160 - Approved equipment testing organizations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.160 Approved.... The application shall be mailed to: Section 608 Recycling Program Manager; Global Programs Division... verifying the performance of certified recycling and recovery equipment manufactured over the long term...

48 CFR 1845.7101-2 - Transfers of property.

Code of Federal Regulations, 2010 CFR

2010-10-01

... items are recorded (including Federal Supply Classification group (FSC) codes for equipment), unit... appropriate such as manufacturing or engineering records used for work control and billing purposes. Shipping... from another contractor that is identified on the shipping document as equipment, but that the...

21 CFR 1271.200 - Equipment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... prevent the introduction, transmission, or spread of communicable diseases, equipment used in the manufacture of HCT/Ps must be of appropriate design for its use and must be suitably located and installed to... result in the introduction, transmission, or spread of communicable diseases. (c) Calibration of...

21 CFR 1271.200 - Equipment.

Code of Federal Regulations, 2014 CFR

2014-04-01

... prevent the introduction, transmission, or spread of communicable diseases, equipment used in the manufacture of HCT/Ps must be of appropriate design for its use and must be suitably located and installed to... result in the introduction, transmission, or spread of communicable diseases. (c) Calibration of...

21 CFR 1271.200 - Equipment.

Code of Federal Regulations, 2013 CFR

2013-04-01

... prevent the introduction, transmission, or spread of communicable diseases, equipment used in the manufacture of HCT/Ps must be of appropriate design for its use and must be suitably located and installed to... result in the introduction, transmission, or spread of communicable diseases. (c) Calibration of...

21 CFR 1271.200 - Equipment.

Code of Federal Regulations, 2012 CFR

2012-04-01

... prevent the introduction, transmission, or spread of communicable diseases, equipment used in the manufacture of HCT/Ps must be of appropriate design for its use and must be suitably located and installed to... result in the introduction, transmission, or spread of communicable diseases. (c) Calibration of...

49 CFR 238.231 - Brake system.

Code of Federal Regulations, 2010 CFR

2010-10-01

... section, “unattended equipment” means equipment left standing and unmanned in such a manner that the brake... wheels or disc rotor surface temperatures exceeding the manufacturer's recommendation. (k) For new... equipment operating speeds. A new simulation is required prior to implementing a change in operating...

41 CFR 109-38.5103 - Motor vehicle utilization standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false Motor vehicle... AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.51-Utilization of Motor Equipment § 109-38.5103 Motor vehicle utilization standards. (a) The following average utilization standards...

40 CFR 63.10 - Recordkeeping and reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... alternative reporting arrangements, in advance, with the permitting authority in that State. Procedures... manufacturer(s) and model number(s); (G) The date of the latest CMS certification or audit; (H) The total..., nonmonitoring equipment malfunctions, quality assurance/quality control calibrations, other known causes, and...

16 CFR 1210.16 - Production testing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... in the manufacturing process, the assembly process, the equipment used to manufacture the product, or... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Production testing. 1210.16 Section 1210.16... STANDARD FOR CIGARETTE LIGHTERS Certification Requirements § 1210.16 Production testing. (a) General...

21 CFR 211.68 - Automatic, mechanical, and electronic equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS... satisfactorily, may be used in the manufacture, processing, packing, and holding of a drug product. If such... designed to assure proper performance. Written records of those calibration checks and inspections shall be...

40 CFR 415.631 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... shall apply to this subpart. (b) The term process wastewater means any water which, during manufacturing... wastewater shall mean any water which, during manufacturing or processing, comes into incidental contact with...) rainfall runoff; (2) accidental spills; (3) accidental leaks caused by the failure of process equipment...

40 CFR 415.601 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... shall apply to this subpart. (b) The term process wastewater means any water which, during manufacturing... wastewater shall mean any water which, during manufacturing or processing, comes into incidental contact with...) rainfall runoff; (2) accidental spills; (3) accidental leaks caused by the failure of process equipment...

40 CFR 415.311 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... apply to this subpart. (b) The term process wastewater means any water which, during manufacturing or... mean any water which, during manufacturing or processing, comes into incidental contact with any raw... runoff; (2) accidental spills; (3) accidental leaks caused by the failure of process equipment, which are...

40 CFR 415.551 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... shall apply to this subpart. (b) The term process wastewater means any water which, during manufacturing... wastewater shall mean any water which, during manufacturing or processing, comes into incidental contact with...) rainfall runoff; (2) accidental spills; (3) accidental leaks caused by the failure of process equipment...

40 CFR 710.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... of a chemical reaction or occurring in nature, and any chemical element or uncombined radical; except... or in part in chemical reaction(s) used for the intentional manufacture of other chemical substance(s... chemical substance was manufactured and other equipment which is strictly ancillary to the reaction vessel...

Manufacture and quality control of interconnecting wire harnesses

NASA Technical Reports Server (NTRS)

1973-01-01

Four-volume series of documents has been prepared as standard reference. Each volume may be used separately and covers wire and cable preparation as well as harness fabrication and installation. Series should be useful addition to libraries of manufactures of electrical and electronic equipment.

Interface standards for computer equipment

NASA Technical Reports Server (NTRS)

1976-01-01

The ability to configure data systems using modules provided by independent manufacturers is complicated by the wide range of electrical, mechanical, and functional characteristics exhibited within the equipment provided by different manufacturers of computers, peripherals, and terminal devices. A number of international organizations were and still are involved in the creation of standards that enable devices to be interconnected with minimal difficulty, usually involving only a cable or data bus connection that is defined by the standard. The elements covered by an interface standard are covered and the most prominent interface standards presently in use are identified and described.

[Issues of provision of the safety of laserwares in the use of nanotechnologies].

PubMed

Pal'tsevIu P; Levina, A V; Kravchenko, O K

2008-01-01

Current technologies, including nanotechnologies, cannot be introduced, without applying laser equipment. For provision of the safety in the manufacture and use of up-to-date laser equipment that is characterized by new, previously unused wavelengths and exposure levels, it is necessary to develop the hygienic regulation of the arrangement and maintenance of lasers, to improve approaches to making their sanitary-and-epidemiological examination and manufacturing inspection, to design measuring instruments that permit an objective assessment of new types of laser exposures, and to develop the current means for protecting the organ of vision in service personnel.

41 CFR 109-38.5102 - Utilization controls and practices.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false Utilization controls and..., TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.51-Utilization of Motor Equipment § 109-38.5102 Utilization controls and practices. Controls and practices to be used by DOE organizations and...

21 CFR 211.105 - Equipment identification.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Equipment identification. 211.105 Section 211.105 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Production and Process Controls...

21 CFR 211.105 - Equipment identification.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Equipment identification. 211.105 Section 211.105 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Production and Process Controls...

21 CFR 211.105 - Equipment identification.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Equipment identification. 211.105 Section 211.105 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Production and Process Controls...