BLAST for Behind-the-Meter Applications Lite Tool | Transportation Research
provided by NREL's PV Watts calculator. A generic utility rate structure framework makes it possible to the BLAST documentation for proper CSV formatting. Rate structure values Define demand charges and energy costs to best represent your utility rate structure of interest. Demand charges and energy costs
DOE Office of Scientific and Technical Information (OSTI.GOV)
Parmesano, Hethie; Kury, Theodore J.
The price of CO{sub 2} emissions allowances affects the structure of the utility's costs, which has implications for rate design and load management programs. Depending on the design of the program to recover these costs, utility total revenue requirements - and the rate design utilized to recover these requirements - may be impacted. A new way to think about rate design may be required. (author)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kumar, S.; Sartor, D.
2005-08-15
Federal agencies often ask if Energy Savings PerformanceContracts (ESPCs) result in the energy and cost savings projected duringthe project development phase. After investing in ESPCs, federal agenciesexpect a reduction in the total energy use and energy cost at the agencylevel. Such questions about the program are common when implementing anESPC project. But is this a fair or accurate perception? Moreimportantly, should the federal agencies evaluate the success or failureof ESPCs by comparing the utility costs before and after projectimplementation?In fact, ESPC contracts employ measurement andverification (M&V) protocols to measure and ensure kilowatt-hour orBTU savings at the project level. In mostmore » cases, the translation toenergy cost savings is not based on actual utility rate structure, but acontracted utility rate that takes the existing utility rate at the timethe contract is signed with a clause to escalate the utility rate by afixed percentage for the duration of the contract. Reporting mechanisms,which advertise these savings in dollars, may imply an impact to budgetsat a much higher level depending on actual utility rate structure. FEMPhas prepared the following analysis to explain why the utility billreduction may not materialize, demonstrate its larger implication onagency s energy reduction goals, and advocate setting the rightexpectations at the outset to preempt the often asked question why I amnot seeing the savings in my utility bill?« less
An Evaluation of Economists’ Influence on Electric Utility Rate Reforms,
1982-01-01
PURPA ) of 1978 required all 50 state utility commissions and more than 150 other jurisdictions regulating electric utility rates to con- sider the...complex rate structure). The "cost effectiveness" language of PURPA suggests such an evaluation criterion based on long term considerations without...detailing the components of benefit; see Joskow. Individual hearings under PURPA have generally employed three standards: fuel or energy savings (if a TOU
NASA Astrophysics Data System (ADS)
Yarowsky, Paul; Kadekaro, Massako; Sokoloff, Louis
1983-07-01
Electrical stimulation of the distal stump of the transected cervical sympathetic trunk produces a frequency-dependent activation of glucose utilization, measured by the deoxy[14C]glucose method, in the superior cervical ganglion of the urethane-anesthetized rat. The frequency dependence falls between 0-15 Hz; at 20 Hz the activation of glucose utilization is no greater than at 15 Hz. Deafferentation of the superior cervical ganglion by transection of the cervical sympathetic trunk does not diminish the rate of glucose utilization in the ganglion in the urethane-anesthetized rat. These results indicate that the rate of energy metabolism in an innervated neural structure is, at least in part, regulated by the impulse frequency of the electrical input to the structure, and this regulation may be an essential component of the mechanism of the coupling of metabolic activity to functional activity in the nervous system.
Rating and analysis of continuous girder bridges.
DOT National Transportation Integrated Search
1980-01-01
Federal regulations prompted as a result of bridge failures require the rating of bridge structures for which federal funds will be utilized for rehabilitation and replacement. The large number of bridges in Virginia subject to being rated makes such...
Code of Federal Regulations, 2010 CFR
2010-07-01
... improvements, commercial and industrial structures, utilities, underground structures such as sewers, pipes... part 884 of this chapter. Self-sustaining means maintaining an insurance rate structure which is designed to be actuarially sound. Self-sustaining requires that State or Indian tribal subsidence insurance...
Code of Federal Regulations, 2011 CFR
2011-07-01
... improvements, commercial and industrial structures, utilities, underground structures such as sewers, pipes... part 884 of this chapter. Self-sustaining means maintaining an insurance rate structure which is designed to be actuarially sound. Self-sustaining requires that State or Indian tribal subsidence insurance...
Code of Federal Regulations, 2012 CFR
2012-07-01
... improvements, commercial and industrial structures, utilities, underground structures such as sewers, pipes... part 884 of this chapter. Self-sustaining means maintaining an insurance rate structure which is designed to be actuarially sound. Self-sustaining requires that State or Indian tribal subsidence insurance...
Code of Federal Regulations, 2014 CFR
2014-07-01
... improvements, commercial and industrial structures, utilities, underground structures such as sewers, pipes... part 884 of this chapter. Self-sustaining means maintaining an insurance rate structure which is designed to be actuarially sound. Self-sustaining requires that State or Indian tribal subsidence insurance...
Code of Federal Regulations, 2013 CFR
2013-07-01
... improvements, commercial and industrial structures, utilities, underground structures such as sewers, pipes... part 884 of this chapter. Self-sustaining means maintaining an insurance rate structure which is designed to be actuarially sound. Self-sustaining requires that State or Indian tribal subsidence insurance...
DOE Office of Scientific and Technical Information (OSTI.GOV)
O'Shaughnessy, Eric; Cutler, Dylan; Ardani, Kristen
As utility electricity rates evolve, pairing solar photovoltaic (PV) systems with battery storage has potential to ensure the value proposition of residential solar by mitigating economic uncertainty. In addition to batteries, load control technologies can reshape customer load profiles to optimize PV system use. The combination of PV, energy storage, and load control provides an integrated approach to PV deployment, which we call 'solar plus'. The U.S. National Renewable Energy Laboratory's Renewable Energy Optimization (REopt) model is utilized to evaluate cost-optimal technology selection, sizing, and dispatch in residential buildings under a variety of rate structures and locations. The REopt modelmore » is extended to include a controllable or 'smart' domestic hot water heater model and smart air conditioner model. We find that the solar plus approach improves end user economics across a variety of rate structures - especially those that are challenging for PV - including lower grid export rates, non-coincident time-of-use structures, and demand charges.« less
O'Shaughnessy, Eric; Cutler, Dylan; Ardani, Kristen; ...
2018-01-11
As utility electricity rates evolve, pairing solar photovoltaic (PV) systems with battery storage has potential to ensure the value proposition of residential solar by mitigating economic uncertainty. In addition to batteries, load control technologies can reshape customer load profiles to optimize PV system use. The combination of PV, energy storage, and load control provides an integrated approach to PV deployment, which we call 'solar plus'. The U.S. National Renewable Energy Laboratory's Renewable Energy Optimization (REopt) model is utilized to evaluate cost-optimal technology selection, sizing, and dispatch in residential buildings under a variety of rate structures and locations. The REopt modelmore » is extended to include a controllable or 'smart' domestic hot water heater model and smart air conditioner model. We find that the solar plus approach improves end user economics across a variety of rate structures - especially those that are challenging for PV - including lower grid export rates, non-coincident time-of-use structures, and demand charges.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
McLaren, Joyce; Davidson, Carolyn; Miller, John
Utilities are proposing changes to residential rate structures to address concerns about lost revenue due to increased adoption of distributed solar generation. An investigation of the impacts of increased fixed charges, minimum bills and residential demand charges on PV and non-PV customer bills suggests that minimum bills more accurately capture utilities' revenue requirement than fixed charges, while not acting as a disincentive to efficiency or negatively impacting low-income customers.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bird, Lori; Davidson, Carolyn; McLaren, Joyce
With rapid growth in energy efficiency and distributed generation, electric utilities are anticipating stagnant or decreasing electricity sales, particularly in the residential sector. Utilities are increasingly considering alternative rates structures that are designed to recover fixed costs from residential solar photovoltaic (PV) customers with low net electricity consumption. Proposed structures have included fixed charge increases, minimum bills, and increasingly, demand rates - for net metered customers and all customers. This study examines the electricity bill implications of various residential rate alternatives for multiple locations within the United States. For the locations analyzed, the results suggest that residential PV customers offset,more » on average, between 60% and 99% of their annual load. However, roughly 65% of a typical customer's electricity demand is non-coincidental with PV generation, so the typical PV customer is generally highly reliant on the grid for pooling services.« less
The Optimization of In-Memory Space Partitioning Trees for Cache Utilization
NASA Astrophysics Data System (ADS)
Yeo, Myung Ho; Min, Young Soo; Bok, Kyoung Soo; Yoo, Jae Soo
In this paper, a novel cache conscious indexing technique based on space partitioning trees is proposed. Many researchers investigated efficient cache conscious indexing techniques which improve retrieval performance of in-memory database management system recently. However, most studies considered data partitioning and targeted fast information retrieval. Existing data partitioning-based index structures significantly degrade performance due to the redundant accesses of overlapped spaces. Specially, R-tree-based index structures suffer from the propagation of MBR (Minimum Bounding Rectangle) information by updating data frequently. In this paper, we propose an in-memory space partitioning index structure for optimal cache utilization. The proposed index structure is compared with the existing index structures in terms of update performance, insertion performance and cache-utilization rate in a variety of environments. The results demonstrate that the proposed index structure offers better performance than existing index structures.
Impact of Alternative Rate Structures on Distributed Solar Customer Electricity Bills
DOE Office of Scientific and Technical Information (OSTI.GOV)
McLaren, Joyce A
Electric utilities are increasingly proposing changes to residential rate structures, in order to address concerns about their inability to recover fixed system costs from customers with grid connected distributed generation. The most common proposals have been to increase fixed charges, set minimum bills or instigate residential demand charges. This presentation provides results of an analysis to explore how these rate design alternatives impact electricity bills for PV and non-PV customers.
NASA Technical Reports Server (NTRS)
1976-01-01
This methodology calculates the electric energy busbar cost from a utility-owned solar electric system. This approach is applicable to both publicly- and privately-owned utilities. Busbar cost represents the minimum price per unit of energy consistent with producing system-resultant revenues equal to the sum of system-resultant costs. This equality is expressed in present value terms, where the discount rate used reflects the rate of return required on invested capital. Major input variables describe the output capabilities and capital cost of the energy system, the cash flows required for system operation amd maintenance, and the financial structure and tax environment of the utility.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ong, S.; Denholm, P.
2011-07-01
Schools in California often have a choice between multiple electricity rate options. For schools with photovoltaic (PV) installations, choosing the right rate is essential to maximize the value of PV generation. The rate option that minimizes a school?s electricity expenses often does not remain the most economical choice after the school installs a PV system. The complex interaction between PV generation, building load, and rate structure makes determining the best rate a challenging task. This report evaluates 22 rate structures across three of California?s largest electric utilities--Pacific Gas and Electric Co. (PG&E), Southern California Edison (SCE), and San Diego Gasmore » and Electric (SDG&E)--in order to identify common rate structure attributes that are favorable to PV installations.« less
Sward structure and nutritive value of Alexandergrass fertilized with nitrogen.
Salvador, Paulo R; Pötter, Luciana; Rocha, Marta G; Hundertmarck, Anelise P; Sichonany, Maria José O; Amaral Neto, Luiz G; Negrini, Mateus; Moterle, Paulo H
2016-03-01
This experiment evaluated forage production, sward structure, stocking rate, weight gain per area and nutritive value of forage as grazed by beef heifers on Alexandergrass (Urochloa plantaginea (Link) Hitch) pasture fertilized with nitrogen (N): 0; 100; 200 or 300 kg of N/ha. The experiment was a completely randomized design following a repeated measurement arrangement. The experimental animals were Angus heifers with initial age and weight of 15 months and 241.5±5 kg, respectively. The grazing method was continuous, with put-and-take stocking. N utilization, regardless of the level, increase by 25% the daily forage accumulation rate and the weight gain per area by 23%. The level of 97.2 kg N/ha leads to a higher leaf blade mass and increases by 20% the leaf:stem ratio. Alterations in sward structure changes the nutritive value of forage as grazed. The utilization of 112.7 kg of N/ha allows the highest stocking rate (2049.8 kg of BW/ha), equivalent to 7.5 heifers per hectare.
Design, construction, testing and evaluation of a residential ice storage air conditioning system
NASA Astrophysics Data System (ADS)
Santos, J. J.; Ritz, T. A.
1982-12-01
The experimental system was used to supply cooling to a single wide trailer and performance data were compared to a conventional air conditioning system of the some capacity. Utility rate information was collected from over one hundred major utility companies and used to evaluate economic comparison of the two systems. The ice storage system utilized reduced rate time periods to accommodate ice while providing continuous cooling to the trailer. The economic evaluation resulted in finding that the ice storage system required over 50% more energy than the conventional system. Although a few of the utility companies offered rate structures which would result in savings of up to $200 per year, this would not be enough to offset higher initial costs over the life of the storage system. Recommendations include items that would have to be met in order for an ice storage system to be an economically viable alternative to the conventional system.
Doctoroff, Greta L; Arnold, David H
2004-12-01
This study investigated multiple forms of home and school assessment as predictors of parent-rated behavior problems across a preschool year. Participants were a community sample of 79 preschool children, their parents, and their teachers. Parent ratings of behavior problems were obtained toward the beginning of the school year and approximately 6 months later. Behavior problems were also assessed early in the school year using parent structured interviews, teacher-rating scales, and classroom observations of problem and prosocial behavior. Consistent with hypotheses, each assessment method significantly predicted year-end parent ratings of behavior problems, even above initial ratings.
Classification of Chemicals Based On Structured Toxicity ...
Thirty years and millions of dollars worth of pesticide registration toxicity studies, historically stored as hardcopy and scanned documents, have been digitized into highly standardized and structured toxicity data within the Toxicity Reference Database (ToxRefDB). Toxicity-based classifications of chemicals were performed as a model application of ToxRefDB. These endpoints will ultimately provide the anchoring toxicity information for the development of predictive models and biological signatures utilizing in vitro assay data. Utilizing query and structured data mining approaches, toxicity profiles were uniformly generated for greater than 300 chemicals. Based on observation rate, species concordance and regulatory relevance, individual and aggregated effects have been selected to classify the chemicals providing a set of predictable endpoints. ToxRefDB exhibits the utility of transforming unstructured toxicity data into structured data and, furthermore, into computable outputs, and serves as a model for applying such data to address modern toxicological problems.
Economics of regulation: externalities and institutional issues
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kahn, A.E.
In two previous articles, ''Can An Economist Find Happiness Setting Public Utility Rates'' and ''Applications of Economics to Public Utility Rate Structures'', appearing in Public Utilities Fortnightly January 5 and January 19, 1978, respectively, the author summarized his experiences in applying elementary economic principles to the regulation of public utilities in New York state, specifically to setting utility rates. In this article, Mr. Kahn discusses second-best considerations and externalities. He points out that opponents of marginal-cost pricing--particularly of electricity--have in recent years become enthusiastic exponents of the theory of second best. What is required, he feels, is an examination ofmore » how other, most directly pertinent prices in the economy do actually stand relative to their marginal costs. These would be the prices of goods and services for which electricity is a substitute; with which electricity is used as a complement; in whose supply electricity is an input; and which themselves constitute inputs in the production and delivery of electricity. Oil and gas are more complicated cases. External costs, such as abatement requirements, are considered when setting rates. The author points out other regulatory issues to be considered in decision making to conclude this series of articles. (MCW)« less
Predicting Graduation Rates at 4-Year Broad Access Institutions Using a Bayesian Modeling Approach
ERIC Educational Resources Information Center
Crisp, Gloria; Doran, Erin; Salis Reyes, Nicole A.
2018-01-01
This study models graduation rates at 4-year broad access institutions (BAIs). We examine the student body, structural-demographic, and financial characteristics that best predict 6-year graduation rates across two time periods (2008-2009 and 2014-2015). A Bayesian model averaging approach is utilized to account for uncertainty in variable…
Automated crystallographic system for high-throughput protein structure determination.
Brunzelle, Joseph S; Shafaee, Padram; Yang, Xiaojing; Weigand, Steve; Ren, Zhong; Anderson, Wayne F
2003-07-01
High-throughput structural genomic efforts require software that is highly automated, distributive and requires minimal user intervention to determine protein structures. Preliminary experiments were set up to test whether automated scripts could utilize a minimum set of input parameters and produce a set of initial protein coordinates. From this starting point, a highly distributive system was developed that could determine macromolecular structures at a high throughput rate, warehouse and harvest the associated data. The system uses a web interface to obtain input data and display results. It utilizes a relational database to store the initial data needed to start the structure-determination process as well as generated data. A distributive program interface administers the crystallographic programs which determine protein structures. Using a test set of 19 protein targets, 79% were determined automatically.
Coming to grips with consumerism. [Panel answers on utility operations and problems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Utility companies, as regulated monopolies, are facing increasing questioning and challenges from consumers. Representatives of the Consumer Federation of America, The Department of Energy, and Edison Electric Institute discuss the kind of information that consumers want and how they can get satisfactory responses from utility companies. The movement, seen as a healthy way for citizens to understand how utilities operate and to learn how to communicate their concerns, is assuming more of a conciliatory than adversary nature. In a panel discussion, the participants outline the issues of communication, rate structure, public relations, utility decision making, and regulation.
Do more hospital beds lead to higher hospitalization rates? a spatial examination of Roemer's Law.
Delamater, Paul L; Messina, Joseph P; Grady, Sue C; WinklerPrins, Vince; Shortridge, Ashton M
2013-01-01
Roemer's Law, a widely cited principle in health care policy, states that hospital beds that are built tend to be used. This simple but powerful expression has been invoked to justify Certificate of Need regulation of hospital beds in an effort to contain health care costs. Despite its influence, a surprisingly small body of empirical evidence supports its content. Furthermore, known geographic factors influencing health services use and the spatial structure of the relationship between hospital bed availability and hospitalization rates have not been sufficiently explored in past examinations of Roemer's Law. We pose the question, "Accounting for space in health care access and use, is there an observable association between the availability of hospital beds and hospital utilization?" We employ an ecological research design based upon the Anderson behavioral model of health care utilization. This conceptual model is implemented in an explicitly spatial context. The effect of hospital bed availability on the utilization of hospital services is evaluated, accounting for spatial structure and controlling for other known determinants of hospital utilization. The stability of this relationship is explored by testing across numerous geographic scales of analysis. The case study comprises an entire state system of hospitals and population, evaluating over one million inpatient admissions. We find compelling evidence that a positive, statistically significant relationship exists between hospital bed availability and inpatient hospitalization rates. Additionally, the observed relationship is invariant with changes in the geographic scale of analysis. This study provides evidence for the effects of Roemer's Law, thus suggesting that variations in hospitalization rates have origins in the availability of hospital beds. This relationship is found to be robust across geographic scales of analysis. These findings suggest continued regulation of hospital bed supply to assist in controlling hospital utilization is justified.
DOE Office of Scientific and Technical Information (OSTI.GOV)
O'Shaughnessy, Eric; Ardani, Kristen; Cutler, Dylan
Solar 'plus' refers to an emerging approach to distributed solar photovoltaic (PV) deployment that uses energy storage and controllable devices to optimize customer economics. The solar plus approach increases customer system value through technologies such as electric batteries, smart domestic water heaters, smart air-conditioner (AC) units, and electric vehicles We use an NREL optimization model to explore the customer-side economics of solar plus under various utility rate structures and net metering rates. We explore optimal solar plus applications in five case studies with different net metering rates and rate structures. The model deploys different configurations of PV, batteries, smart domesticmore » water heaters, and smart AC units in response to different rate structures and customer load profiles. The results indicate that solar plus improves the customer economics of PV and may mitigate some of the negative impacts of evolving rate structures on PV economics. Solar plus may become an increasingly viable model for optimizing PV customer economics in an evolving rate environment.« less
Solar Plus: A Holistic Approach to Distributed Solar PV
DOE Office of Scientific and Technical Information (OSTI.GOV)
OShaughnessy, Eric J.; Ardani, Kristen B.; Cutler, Dylan S.
Solar 'plus' refers to an emerging approach to distributed solar photovoltaic (PV) deployment that uses energy storage and controllable devices to optimize customer economics. The solar plus approach increases customer system value through technologies such as electric batteries, smart domestic water heaters, smart air-conditioner (AC) units, and electric vehicles We use an NREL optimization model to explore the customer-side economics of solar plus under various utility rate structures and net metering rates. We explore optimal solar plus applications in five case studies with different net metering rates and rate structures. The model deploys different configurations of PV, batteries, smart domesticmore » water heaters, and smart AC units in response to different rate structures and customer load profiles. The results indicate that solar plus improves the customer economics of PV and may mitigate some of the negative impacts of evolving rate structures on PV economics. Solar plus may become an increasingly viable model for optimizing PV customer economics in an evolving rate environment.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Santos, J.J.; Ritz, T.A.
1982-11-01
The experimental system was used to supply cooling to a single wide trailer and performance data were compared to a conventional air conditioning system of the some capacity. Utility rate information was collected from over one hundred major utility companies and used to evaluate economic comparison of the two systems. The ice storage system utilized reduced rate time periods to accommodate ice while providing continuous cooling to the trailer. The economic evaluation resulted in finding that the ice storage system required over 50% more energy than the conventional system. Although a few of the utility companies offered rate structures whichmore » would result in savings of up to $200 per year, this would not be enough to offset higher initial costs over the life of the storage system. Recommendations include items that would have to be met in order for an ice storage system to be an economically viable alternative to the conventional system.« less
Structure and Utility of Blind Speed Intervals Associated with Doppler Measurements of Range Rate
1993-02-01
computer programming concepts of speed, memory , and data structures that can be exploited to fabricate efficient software realizations of two phase range...to the effect that it is possible to derive a reasonable unambiguous estimate of range rate from the measurement of the pulse-to-pulse phase shift in...the properties of the blind speed intervals generated by the base speeds involved in two measurement equations. Sections 12 through 18 make up the
Efficient utilization of red maple lumber in glued-laminated timber beams
J. J. Janowiak; H. B. Manbeck; R. Hernandez; R. C. Moody; P. R. Blankenhorn; P. Labosky
The feasibility of utilizing cant-sawn hardwood lumber, which would not usually be desired for furniture manufacture, was studied for the manufacture of structural glued-laminated (glulam) timber. Two red maple beam combinations were evaluated: (1) a glulam combination designed with E-rated lumber in 25 percent of the outer laminations (top and bottom) and No. 3 grade...
Majdak, Piotr; Laback, Bernhard; Baumgartner, Wolf-Dieter
2006-10-01
Bilateral cochlear implant (CI) listeners currently use stimulation strategies which encode interaural time differences (ITD) in the temporal envelope but which do not transmit ITD in the fine structure, due to the constant phase in the electric pulse train. To determine the utility of encoding ITD in the fine structure, ITD-based lateralization was investigated with four CI listeners and four normal hearing (NH) subjects listening to a simulation of electric stimulation. Lateralization discrimination was tested at different pulse rates for various combinations of independently controlled fine structure ITD and envelope ITD. Results for electric hearing show that the fine structure ITD had the strongest impact on lateralization at lower pulse rates, with significant effects for pulse rates up to 800 pulses per second. At higher pulse rates, lateralization discrimination depended solely on the envelope ITD. The data suggest that bilateral CI listeners benefit from transmitting fine structure ITD at lower pulse rates. However, there were strong interindividual differences: the better performing CI listeners performed comparably to the NH listeners.
Do Standard Measures of Preschool Quality Used in Statewide Policy Predict School Readiness?
ERIC Educational Resources Information Center
Sabol, Terri J.; Pianta, Robert C.
2014-01-01
In the majority of states using Quality Rating and Improvement Systems (QRIS) to improve children's school readiness, the Early Childhood Environmental Rating Scale-Revised (ECERS-R) is a core assessment of preschool program quality and is central to QRIS metrics and incentive structures. The present study utilizes nationally representative data…
NASA Astrophysics Data System (ADS)
Jung, Hyun; Gerasopoulos, Konstantinos; Talin, A. Alec; Ghodssi, Reza
2017-02-01
The insertion/extraction of lithium into/from various host materials is the basic process by which lithium-ion batteries reversible store charge. This process is generally accompanied by strain in the host material, inducing stress which can lead to capacity loss. Therefore, understanding of both the structural changes and the associated stress - investigated almost exclusively separate to date - is a critical factor for developing high-performance batteries. Here, we report an in situ method, which utilizes Raman spectroscopy in parallel with optical interferometry to study effects of varying charging rates (C-rates) on the structure and stress in a V2O5 thin film cathode. Abrupt stress changes at specific crystal phase transitions in the Lisbnd Vsbnd O system are observed and the magnitude of the stress changes with the amount of lithium inserted into the electrode are correlated. A linear increase in the stress as a function of x in LixV2O5 is observed, indicating that C-rate does not directly contribute to larger intercalation stress. However, a more rapid increase in disorder within the LixV2O5 layers is correlated with higher C-rate. Ultimately, these experiments demonstrate how the simultaneous stress/Raman in situ approach can be utilized as a characterization platform for investigating various critical factors affecting lithium-ion battery performance.
Program factors that influence utilization of adult day care.
Conrad, K J; Hughes, S L; Wang, S
1992-01-01
Health planners, policymakers, and providers urgently require methods and information that explain the factors that affect health services utilization. This information is especially critical for planning programs that are effective in maintaining the burgeoning elderly population in community care. In this study, correlation and regression analyses examined the characteristics of adult day care (ADC) centers that were associated with utilization as operationalized by demand for and actual attendance in 822 centers. Community, client population, services and activities, and structural characteristics were associated with demand per center whereas the social environment of the ADC center was not. The attendance rate was most strongly affected by services and activities and structural characteristics. The significance of the study, its limitations, and future directions for research are discussed. PMID:1399653
Mackin, R Scott; Delucchi, Kevin L; Bennett, Robert W; Areán, Patricia A
2011-02-01
This study was conducted to determine the effect of cognitive impairment (CI) on mental healthcare costs for older low-income adults with severe psychiatric illness. Data were collected from 62 ethnically diverse low-income older adults with severe psychiatric illness who were participating in day programming at a large community mental health center. CI was diagnosed by a neuropsychologist utilizing the Mattis Dementia Rating Scale-Second Edition and structured ratings of functional impairment (Clinical Dementia Rating Scale). Mental healthcare costs for 6, 12, and 24-month intervals before cognitive assessments were obtained for each participant. Substance abuse history was evaluated utilizing a structured questionnaire, depression symptom severity was assessed utilizing the Hamilton Depression Rating Scale, and psychiatric diagnoses were obtained through medical chart abstraction. CI was exhibited by 61% of participants and was associated with significantly increased mental healthcare costs during 6, 12, and 24-month intervals. Results of a regression analysis indicated that ethnicity and CI were both significant predictors of log transformed mental healthcare costs over 24 months with CI accounting for 13% of the variance in cost data. CI is a significant factor associated with increased mental healthcare costs in patients with severe psychiatric illness. Identifying targeted interventions to accommodate CI may lead to improving treatment outcomes and reducing the burden of mental healthcare costs for individuals with severe psychiatric illness.
Factor Structure of the Exercise Self-Efficacy Scale
ERIC Educational Resources Information Center
Cornick, Jessica E.
2015-01-01
The current study utilized exercise self-efficacy ratings from undergraduate students to assess the factor structure of the Self-Efficacy to Regulate Exercise Scale (Bandura, 1997, 2006). An exploratory factor analysis (n = 759) indicated a two-factor model solution and three separate confirmatory factor analyses (n = 1,798) supported this…
Power industry competition, reengineering, and globalization
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hyman, L.S.
1994-07-01
This article presents the views of a vice-president of a financial company on the future of the US electric utility industry. The topics of the article include a historical perspective of the structure of the industry, government regulation, deregulation and competition, rate structures and pricing, effects on stockholders and bondholders, and strategies for growth.
76 FR 74050 - Measured Building Energy Performance Data Taxonomy
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-30
... data sources and taxonomies. Certain data fields have enumerated types that provide a discrete set of... Utility, Electric Rate Structure, and Electricity Summer Peak Power. The Priority 3 data fields include...
ERIC Educational Resources Information Center
Stansell, John C.; And Others
Studies were conducted to investigate cue system utilization by three groups of readers--six second graders, six ninth graders, and four adults past the age of sixty who were rated as mature readers. The second graders read materials that varied according to organizational structure, while the other groups read materials that differed in the…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Smith, Paul F.; Brady, Alexander B.; Lee, Seung-Yong
α-MnO 2-structured materials are generally classified as semiconductors, thus we present a strategy to increase electrochemical utilization through design of a conductive material interface. Surface treatment of silver hollandite (Ag xMn 8O 16) with Ag + (Ag 2O) provides significant benefit to the resultant electrochemistry, including a decreased charge transfer resistance, and a 2-fold increase in deliverable energy density at high rate. The improved function of this designed interface relative to conventional electrode fabrication strategies is further highlighted.
Smith, Paul F.; Brady, Alexander B.; Lee, Seung-Yong; ...
2017-12-11
α-MnO 2-structured materials are generally classified as semiconductors, thus we present a strategy to increase electrochemical utilization through design of a conductive material interface. Surface treatment of silver hollandite (Ag xMn 8O 16) with Ag + (Ag 2O) provides significant benefit to the resultant electrochemistry, including a decreased charge transfer resistance, and a 2-fold increase in deliverable energy density at high rate. The improved function of this designed interface relative to conventional electrode fabrication strategies is further highlighted.
Methods for Performing Survival Curve Quality-of-Life Assessments.
Sumner, Walton; Ding, Eric; Fischer, Irene D; Hagen, Michael D
2014-08-01
Many medical decisions involve an implied choice between alternative survival curves, typically with differing quality of life. Common preference assessment methods neglect this structure, creating some risk of distortions. Survival curve quality-of-life assessments (SQLA) were developed from Gompertz survival curves fitting the general population's survival. An algorithm was developed to generate relative discount rate-utility (DRU) functions from a standard survival curve and health state and an equally attractive alternative curve and state. A least means squared distance algorithm was developed to describe how nearly 3 or more DRU functions intersect. These techniques were implemented in a program called X-Trade and tested. SQLA scenarios can portray realistic treatment choices. A side effect scenario portrays one prototypical choice, to extend life while experiencing some loss, such as an amputation. A risky treatment scenario portrays procedures with an initial mortality risk. A time trade scenario mimics conventional time tradeoffs. Each SQLA scenario yields DRU functions with distinctive shapes, such as sigmoid curves or vertical lines. One SQLA can imply a discount rate or utility if the other value is known and both values are temporally stable. Two SQLA exercises imply a unique discount rate and utility if the inferred DRU functions intersect. Three or more SQLA results can quantify uncertainty or inconsistency in discount rate and utility estimates. Pilot studies suggested that many subjects could learn to interpret survival curves and do SQLA. SQLA confuse some people. Compared with SQLA, standard gambles quantify very low utilities more easily, and time tradeoffs are simpler for high utilities. When discount rates approach zero, time tradeoffs are as informative and easier to do than SQLA. SQLA may complement conventional utility assessment methods. © The Author(s) 2014.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gross, P.M.; Kadekaro, M.; Andrews, D.W.
The subfornical organ is a major receptor area for one of the principal stimuli of thirst, the octapeptide, angiotensin II. In conscious water-sated rats, the authors examined the effects of intravenous infusion of angiotensin II on the rate of glucose utilization in the subfornical organ and in structures anatomically and functionally connected with it. Angiotensin II produced pressor and drinking responses and increased glucose utilization selectively in the subfornical organ and pituitary neural lobe and in no other brain structure. Treatment with the angiotensin II antagonist, sar1-leu8-angiotensin II, before intravenous administration of angiotensin II prevented metabolic stimulation of the subfornicalmore » organ and neural lobe. Captopril, an inhibitor of angiotensin-converting enzyme, reduced subfornical organ glucose metabolism to a level similar to that found in control animals. These results demonstrate that peripheral angiotensin II stimulates glucose metabolism in the subfornical organ under conditions in which it provokes drinking and pressor responses. The findings suggest that circulating angiotensin II is responsible for the high rate of glucose utilization observed in the subfornical organ of Brattleboro rats homozygous for diabetes insipidus.« less
The Counseling Opportunity Structure: Examining Correlates of Four-Year College-Going Rates
ERIC Educational Resources Information Center
Engberg, Mark E.; Gilbert, Aliza J.
2014-01-01
This study examines the relationships between the normative and resource dimensions of a high school counseling department and four-year college-going rates. Utilizing data from the High School Longitudinal Study of 2009 (HSLS: 09), we employ multiple regression and latent class analysis to identify salient factors related to the college-going…
Changes in microbial community structure following herbicide (glyphosate) additions to forest soils
Alice W. Ratcliff; Matt D. Busse; Carol J. Shestak
2006-01-01
Glyphosate applied at the recommended field rate to a clay loam and a sandy loam forest soil resulted in few changes in microbial community structure. Total and culturable bacteria, fungal hyphal length, bacterial:fungal biomass, carbon utilization profiles (BIOLOG), and bacterial and fungal phospholipid fatty acids (PLFA) were unaffected 1, 3, 7, or 30 days...
The Impact of the Structure, Function, and Resources of the Campus Security Office on Campus Safety
ERIC Educational Resources Information Center
Bennett, Patricia Anne
2012-01-01
The topic of this dissertation is college and university safety. This national quantitative study utilized resource dependency theory to examine relationships between the incidence of reported campus crimes and the structure, function, and resources of campus security offices. This study uncovered a difference in reported total crime rates,…
The Analysis of Rates of Naval Compensation by the Use of a Structured Job Analysis Procedure.
ERIC Educational Resources Information Center
Harris, Alma F.; McCormick, Ernest J.
The study deals with the experimental application of a structured job analysis procedure to enlisted and officer billets in the Navy, with particular reference to its potential use in relating naval compensation for billet incumbents to compensation for civilian jobs with similar characteristics, and in assessing its utility for allocating naval…
Bascoe, Sonnette M.; Davies, Patrick T.; Cummings, E. Mark
2012-01-01
Translating relationship boundaries conceptualizations to the study of sibling relationships, this study examined the utility of sibling enmeshment and disengagement in predicting child adjustment difficulties in a sample of 282 mothers and adolescents (Mean age = 12.7 years). Mothers completed a semi-structured interview at the first measurement occasion to assess sibling interaction patterns. Adolescents, mothers, and teachers reported on children’s adjustment problems across two annual waves of assessment. Supporting the incremental utility of a boundary conceptualization of sibling relationships, results of latent difference score analyses indicated that coder ratings of sibling enmeshment and disengagement uniquely predicted greater adolescent adjustment difficulties even after taking into account standard indices of sibling relationship quality (i.e., warmth, conflict) and sibling structural characteristics (e.g., sex). PMID:22862542
Do More Hospital Beds Lead to Higher Hospitalization Rates? A Spatial Examination of Roemer’s Law
Delamater, Paul L.; Messina, Joseph P.; Grady, Sue C.; WinklerPrins, Vince; Shortridge, Ashton M.
2013-01-01
Background Roemer’s Law, a widely cited principle in health care policy, states that hospital beds that are built tend to be used. This simple but powerful expression has been invoked to justify Certificate of Need regulation of hospital beds in an effort to contain health care costs. Despite its influence, a surprisingly small body of empirical evidence supports its content. Furthermore, known geographic factors influencing health services use and the spatial structure of the relationship between hospital bed availability and hospitalization rates have not been sufficiently explored in past examinations of Roemer’s Law. We pose the question, “Accounting for space in health care access and use, is there an observable association between the availability of hospital beds and hospital utilization?” Methods We employ an ecological research design based upon the Anderson behavioral model of health care utilization. This conceptual model is implemented in an explicitly spatial context. The effect of hospital bed availability on the utilization of hospital services is evaluated, accounting for spatial structure and controlling for other known determinants of hospital utilization. The stability of this relationship is explored by testing across numerous geographic scales of analysis. The case study comprises an entire state system of hospitals and population, evaluating over one million inpatient admissions. Results We find compelling evidence that a positive, statistically significant relationship exists between hospital bed availability and inpatient hospitalization rates. Additionally, the observed relationship is invariant with changes in the geographic scale of analysis. Conclusions This study provides evidence for the effects of Roemer’s Law, thus suggesting that variations in hospitalization rates have origins in the availability of hospital beds. This relationship is found to be robust across geographic scales of analysis. These findings suggest continued regulation of hospital bed supply to assist in controlling hospital utilization is justified. PMID:23418432
Solar heating and the electric utilities
NASA Astrophysics Data System (ADS)
Maidique, M. A.; Woo, B.
1980-05-01
The article considers the effect of widespread use of solar thermal systems on the role of electric utilities, emphasizing the foreseen short term economic problems. While the average electricity demand will be reduced, infrequent high demand peaks could occur when on nights and certain days, solar users with inadequate storage capacity are forced to depend upon conventional energy sources. Since utility costs are closely related to changes in peak demands, the modification of electricity rate structures as a load management technique is discussed. Some advantages of wide solar energy application for electric utilities are cited including the possibility of their key role in the development of solar heating.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jung, Hyun; Gerasopoulos, Konstantinos; Talin, Albert Alec
Here, the insertion/extraction of lithium into/from various host materials is the basic process by which lithium-ion batteries reversible store charge. This process is generally accompanied by strain in the host material, inducing stress which can lead to capacity loss. Therefore, understanding of both the structural changes and the associated stress – investigated almost exclusively separate to date – is a critical factor for developing high-performance batteries. Here, we report an in situ method, which utilizes Raman spectroscopy in parallel with optical interferometry to study effects of varying charging rates (C-rates) on the structure and stress in a V 2O 5more » thin film cathode. Abrupt stress changes at specific crystal phase transitions in the Li—V—O system are observed and the magnitude of the stress changes with the amount of lithium inserted into the electrode are correlated. A linear increase in the stress as a function of x in Li xV 2O 5 is observed, indicating that C-rate does not directly contribute to larger intercalation stress. However, a more rapid increase in disorder within the Li xV 2O 5 layers is correlated with higher C-rate. Ultimately, these experiments demonstrate how the simultaneous stress/Raman in situ approach can be utilized as a characterization platform for investigating various critical factors affecting lithium-ion battery performance.« less
Jung, Hyun; Gerasopoulos, Konstantinos; Talin, Albert Alec; ...
2016-11-22
Here, the insertion/extraction of lithium into/from various host materials is the basic process by which lithium-ion batteries reversible store charge. This process is generally accompanied by strain in the host material, inducing stress which can lead to capacity loss. Therefore, understanding of both the structural changes and the associated stress – investigated almost exclusively separate to date – is a critical factor for developing high-performance batteries. Here, we report an in situ method, which utilizes Raman spectroscopy in parallel with optical interferometry to study effects of varying charging rates (C-rates) on the structure and stress in a V 2O 5more » thin film cathode. Abrupt stress changes at specific crystal phase transitions in the Li—V—O system are observed and the magnitude of the stress changes with the amount of lithium inserted into the electrode are correlated. A linear increase in the stress as a function of x in Li xV 2O 5 is observed, indicating that C-rate does not directly contribute to larger intercalation stress. However, a more rapid increase in disorder within the Li xV 2O 5 layers is correlated with higher C-rate. Ultimately, these experiments demonstrate how the simultaneous stress/Raman in situ approach can be utilized as a characterization platform for investigating various critical factors affecting lithium-ion battery performance.« less
Simulation and evaluation of latent heat thermal energy storage
NASA Technical Reports Server (NTRS)
Sigmon, T. W.
1980-01-01
The relative value of thermal energy storage (TES) for heat pump storage (heating and cooling) as a function of storage temperature, mode of storage (hotside or coldside), geographic locations, and utility time of use rate structures were derived. Computer models used to simulate the performance of a number of TES/heat pump configurations are described. The models are based on existing performance data of heat pump components, available building thermal load computational procedures, and generalized TES subsystem design. Life cycle costs computed for each site, configuration, and rate structure are discussed.
NASA Astrophysics Data System (ADS)
Kaloop, Mosbeh R.; Yigit, Cemal O.; Hu, Jong W.
2018-03-01
Recently, the high rate global navigation satellite system-precise point positioning (GNSS-PPP) technique has been used to detect the dynamic behavior of structures. This study aimed to increase the accuracy of the extraction oscillation properties of structural movements based on the high-rate (10 Hz) GNSS-PPP monitoring technique. A developmental model based on the combination of wavelet package transformation (WPT) de-noising and neural network prediction (NN) was proposed to improve the dynamic behavior of structures for GNSS-PPP method. A complicated numerical simulation involving highly noisy data and 13 experimental cases with different loads were utilized to confirm the efficiency of the proposed model design and the monitoring technique in detecting the dynamic behavior of structures. The results revealed that, when combined with the proposed model, GNSS-PPP method can be used to accurately detect the dynamic behavior of engineering structures as an alternative to relative GNSS method.
Economics of Utility Scale Photovoltaics at Purdue University
NASA Astrophysics Data System (ADS)
Arnett, William
The research for this case study shows that utility scale solar photovoltaics has become a competitive energy investment option, even when a campus operates a power plant at low electricity rates. To evaluate this an economic model called SEEMS (Solar Economic Evaluation Modelling Spreadsheets) was developed to evaluate a number of financial scenarios in Real Time Pricing for universities. The three main financing structures considered are 1) land leasing, 2) university direct purchase, and 3) third party purchase. Unlike other commercially available models SEEMS specifically accounts for real time pricing, where the local utility provides electricity at an hourly rate that changes with the expected demand. In addition, SEEMS also includes a random simulation that allows the model to predict the likelihood of success for a given solar installation strategy. The research showed that there are several options for utility scale solar that are financially attractive. The most practical financing structure is with a third party partnership because of the opportunity to take advantage of tax incentives. Other options could become more attractive if non-financial benefits are considered. The case study for this research, Purdue University, has a unique opportunity to integrate utility-scale solar electricity into its strategic planning. Currently Purdue is updating its master plan which will define how land is developed. Purdue is also developing a sustainability plan that will define long term environmental goals. In addition, the university is developing over 500 acres of land west of campus as part of its Aerospace Innovation District. This research helps make the case for including utility-scale solar electricity as part of the university's strategic planning.
Jiang, Zhou; Jin, Peizhen; Mishra, Nishikant; Song, Malin
2017-09-01
The problems with China's regional industrial overcapacity are often influenced by local governments. This study constructs a framework that includes the resource and environmental costs to analyze overcapacity using the non-radial direction distance function and the price method to measure industrial capacity utilization and market segmentation in 29 provinces in China from 2002 to 2014. The empirical analysis of the spatial panel econometric model shows that (1) the industrial capacity utilization in China's provinces has a ladder-type distribution with a gradual decrease from east to west and there is a severe overcapacity in the traditional heavy industry areas; (2) local government intervention has serious negative effects on regional industry utilization and factor market segmentation more significantly inhibits the utilization rate of regional industry than commodity market segmentation; (3) economic openness improves the utilization rate of industrial capacity while the internet penetration rate and regional environmental management investment have no significant impact; and(4) a higher degree of openness and active private economic development have a positive spatial spillover effect, while there is a significant negative spatial spillover effect from local government intervention and industrial structure sophistication. This paper includes the impact of resources and the environment in overcapacity evaluations, which should guide sustainable development in emerging economies.
Method for fabrication of electrodes
Jankowski, Alan F.; Morse, Jeffrey D.; Barksdale, Randy
2004-06-22
Described herein is a method to fabricate porous thin-film electrodes for fuel cells and fuel cell stacks. Furthermore, the method can be used for all fuel cell electrolyte materials which utilize a continuous electrolyte layer. An electrode layer is deposited on a porous host structure by flowing gas (for example, Argon) from the bottomside of the host structure while simultaneously depositing a conductive material onto the topside of the host structure. By controlling the gas flow rate through the pores, along with the process conditions and deposition rate of the thin-film electrode material, a film of a pre-determined thickness can be formed. Once the porous electrode is formed, a continuous electrolyte thin-film is deposited, followed by a second porous electrode to complete the fuel cell structure.
Few-layer graphene growth from polystyrene as solid carbon source utilizing simple APCVD method
NASA Astrophysics Data System (ADS)
Ahmadi, Shahrokh; Afzalzadeh, Reza
2016-07-01
This research article presents development of an economical, simple, immune and environment friendly process to grow few-layer graphene by controlling evaporation rate of polystyrene on copper foil as catalyst and substrate utilizing atmospheric pressure chemical vapor deposition (APCVD) method. Evaporation rate of polystyrene depends on molecular structure, amount of used material and temperature. We have found controlling rate of evaporation of polystyrene by controlling the source temperature is easier than controlling the material weight. Atomic force microscopy (AFM) as well as Raman Spectroscopy has been used for characterization of the layers. The frequency of G‧ to G band ratio intensity in some samples varied between 0.8 and 1.6 corresponding to few-layer graphene. Topography characterization by atomic force microscopy confirmed Raman results.
Hangar Fire Suppression Utilizing Novec 1230
2018-01-01
The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing...fuel fires in aircraft hangars. A 30×30×8-ft concrete-and-steel test structure was constructed for this test series . Four discharge assemblies...structure. System discharge parameters---discharge time , discharge rate, and quantity of agent discharged---were adjusted to produce the desired Novec 1230
Building Energy Asset Score for Utilities and Energy Efficiency Program Administrators
DOE Office of Scientific and Technical Information (OSTI.GOV)
Building Technologies Office
2015-01-01
The Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifies opportunities for users to invest in energy efficiency upgrades. It is web-based and free to use. This fact sheet discusses the value of the score for utilities and energy efficiency program administrators.
18 CFR 35.35 - Transmission infrastructure investment.
Code of Federal Regulations, 2014 CFR
2014-04-01
... base; (iii) Recovery of prudently incurred pre-commercial operations costs; (iv) Hypothetical capital structure; (v) Accelerated depreciation used for rate recovery; (vi) Recovery of 100 percent of prudently... of the public utility; (vii) Deferred cost recovery; and (viii) Any other incentives approved by the...
18 CFR 35.35 - Transmission infrastructure investment.
Code of Federal Regulations, 2012 CFR
2012-04-01
... base; (iii) Recovery of prudently incurred pre-commercial operations costs; (iv) Hypothetical capital structure; (v) Accelerated depreciation used for rate recovery; (vi) Recovery of 100 percent of prudently... of the public utility; (vii) Deferred cost recovery; and (viii) Any other incentives approved by the...
18 CFR 35.35 - Transmission infrastructure investment.
Code of Federal Regulations, 2013 CFR
2013-04-01
... base; (iii) Recovery of prudently incurred pre-commercial operations costs; (iv) Hypothetical capital structure; (v) Accelerated depreciation used for rate recovery; (vi) Recovery of 100 percent of prudently... of the public utility; (vii) Deferred cost recovery; and (viii) Any other incentives approved by the...
Wang, Zhi-Wu; Hamilton-Brehm, Scott D; Lochner, Adriane; Elkins, James G; Morrell-Falvey, Jennifer L
2011-02-01
In this study, a hydrolysate diffusion and utilization model was developed to examine factors influencing cellulolytic biofilm morphology. Model simulations using Caldicellulosiruptor obsidiansis revealed that the cellulolytic biofilm needs to generate more hydrolysate than it consumes to establish a higher than bulk solution intra-biofilm substrate concentration to support its growth. This produces a hydrolysate surplus that diffuses through the thin biofilm structure into the bulk solution, which gives rise to a uniform growth rate and hence the homogeneous morphology of the cellulolytic biofilm. Model predictions were tested against experimental data from a cellulose-fermenting bioreactor and the results were consistent with the model prediction and indicated that only a small fraction (10-12%) of the soluble hydrolysis products are utilized by the biofilm. The factors determining the rate-limiting step of cellulolytic biofilm growth are also analyzed and discussed. Copyright © 2010 Elsevier Ltd. All rights reserved.
Meurs, Kathryn M; Stern, Josh A; Reina-Doreste, Yamir; Maran, Brian A; Chdid, Lhoucine; Lahmers, Sunshine; Keene, Bruce W; Mealey, Katrina L
2015-09-01
β-Adrenergic receptor antagonists are widely utilized for the management of cardiac diseases in dogs. We have recently identified two deletion polymorphisms in the canine adrenoreceptor 1 (ADRB1) gene.We hypothesized that canine ADRB1 deletions would alter the structure of the protein, as well as the heart rate response to the β-adrenergic receptor antagonist, atenolol. The objectives of this study were to predict the impact of these deletions on the predicted structure of the protein and on the heart rate response to atenolol in a population of healthy adult dogs. Eighteen apparently healthy, mature dogs with (11) and without (seven) ADRB1 deletions were evaluated. The heart rate of the dogs was evaluated with a baseline ambulatory ECG before and 14-21 days after atenolol therapy (1 mg/kg orally q12 h). Minimum, average, and maximum heart rates were compared between groups of dogs (deletions, controls) using an unpaired t-test and within each group of dogs using a paired t-test. The protein structure of ADRB1 was predicted by computer modeling. Deletions were predicted to alter the structure of the ADRB1 protein. The heart rates of the dogs with deletions were lower than those of the control dogs (the average heart rates were significantly lower). ADRB1 deletions appear to have structural and functional consequences. Individual genome-based treatment recommendations could impact the management of dogs with heart disease.
Photovoltaics as a terrestrial energy source. Volume 2: System value
NASA Technical Reports Server (NTRS)
Smith, J. L.
1980-01-01
Assumptions and techniques employed by the electric utility industry and other electricity planners to make estimates of the future value of photovoltaic (PV) systems interconnected with U.S. electric utilities were examined. Existing estimates of PV value and their interpretation and limitations are discussed. PV value is defined as the marginal private savings accruing to potential PV owners. For utility-owned PV systems, these values are shown to be the after-tax savings in conventional fuel and capacity displaced by the PV output. For non-utility-owned (distributed) systems, the utility's savings in fuel and capacity must first be translated through the electric rate structure (prices) to the potential PV system owner. Base-case estimates of the average value of PV systems to U.S. utilities are presented. The relationship of these results to the PV Program price goals and current energy policy is discussed; the usefulness of PV output quantity goals is also reviewed.
Mechanoregulation of clathrin-mediated endocytosis in isolated cells and developing tissues
NASA Astrophysics Data System (ADS)
Kural, Comert
Clathrin-coated assemblies bear the largest fraction of the endocytic load from the plasma membrane of eukaryotic cells. However, dynamics of clathrin-mediated endocytosis (CME) have not been established within tissues of multicellular organisms due to experimental and analytical bottlenecks in determining the lifespan of clathrin-coated structures. We found that clathrin coat growth rates obtained from fluorescence microscopy acquisitions can be utilized as reporters of CME dynamics. Growth rates can be assembled within time windows shorter than the average clathrin coat lifetime and, thereby, allow probing the changes in CME dynamics in real time. Furthermore, this novel approach is applicable to tissues as it is not prone to particle detection and tracking errors, which result in underestimation of the clathrin coat lifetimes. Exploiting these advantages, we detected spatial and temporal changes in CME dynamics within Drosophila amnioserosa tissues at different stages of embryo development. We also found that increased membrane tension impedes CME through inhibition of formation and dissolution of clathrin-coated structures. Therefore, the parameters defining clathrin coat dynamics (i.e., lifetime, formation density and growth rates) can be utilized to monitor the spatiotemporal gradients of the plasma membrane tension during cell migration and spreading.
Utility Rate Equations of Group Population Dynamics in Biological and Social Systems
Yukalov, Vyacheslav I.; Yukalova, Elizaveta P.; Sornette, Didier
2013-01-01
We present a novel system of equations to describe the evolution of self-organized structured societies (biological or human) composed of several trait groups. The suggested approach is based on the combination of ideas employed in the theory of biological populations, system theory, and utility theory. The evolution equations are defined as utility rate equations, whose parameters are characterized by the utility of each group with respect to the society as a whole and by the mutual utilities of groups with respect to each other. We analyze in detail the cases of two groups (cooperators and defectors) and of three groups (cooperators, defectors, and regulators) and find that, in a self-organized society, neither defectors nor regulators can overpass the maximal fractions of about each. This is in agreement with the data for bee and ant colonies. The classification of societies by their distance from equilibrium is proposed. We apply the formalism to rank the countries according to the introduced metric quantifying their relative stability, which depends on the cost of defectors and regulators as well as their respective population fractions. We find a remarkable concordance with more standard economic ranking based, for instance, on GDP per capita. PMID:24386163
Utility rate equations of group population dynamics in biological and social systems.
Yukalov, Vyacheslav I; Yukalova, Elizaveta P; Sornette, Didier
2013-01-01
We present a novel system of equations to describe the evolution of self-organized structured societies (biological or human) composed of several trait groups. The suggested approach is based on the combination of ideas employed in the theory of biological populations, system theory, and utility theory. The evolution equations are defined as utility rate equations, whose parameters are characterized by the utility of each group with respect to the society as a whole and by the mutual utilities of groups with respect to each other. We analyze in detail the cases of two groups (cooperators and defectors) and of three groups (cooperators, defectors, and regulators) and find that, in a self-organized society, neither defectors nor regulators can overpass the maximal fractions of about [Formula: see text] each. This is in agreement with the data for bee and ant colonies. The classification of societies by their distance from equilibrium is proposed. We apply the formalism to rank the countries according to the introduced metric quantifying their relative stability, which depends on the cost of defectors and regulators as well as their respective population fractions. We find a remarkable concordance with more standard economic ranking based, for instance, on GDP per capita.
NASA Astrophysics Data System (ADS)
Song, Xinyu; Ma, Xinlong; Ning, Guoqing; Gao, Daowei; Yu, Zhiqing; Xiao, Zhihua
2018-06-01
The orientation construction of S and N dual-doped discoid-like graphene (labeled as SNDG) is achieved by regular arrangement of the polycyclic aromatics in pitch molecules using natural diatomites as templates. The superior electrochemical energy storage ability of SNDG is demonstrated by cathode and anode tests, respectively. The synergistic effects of the robust scaffold coupled with the hollow structure, unique porous structure, the excellent structural stability and the dual-doping of S and N lead to the electrode property enhancement in terms of rate capability and durability. The Li ion hybrid capacitor using SNDG as both anode and cathode, presents excellent long-term cycling stability and markedly energy and power densities (up to 143 Wh kg-1 and 13,548 W kg-1). This work provides a novel pathway to realize the mass production of high-rate electrode materials via the high value-added utilization of pitch.
NASA Astrophysics Data System (ADS)
Katta, Nitesh; Mcelroy, Austin; Estrada, Arnold; Milner, Thomas E.
2017-02-01
Neurological cancer surgeries require specialized tools that enhance imaging for precise cutting and removal of tissue without damaging adjacent neurological structures. The novel combination of high-resolution fast optical coherence tomography (OCT) alongside short pulsed nanosecond thulium (Tm) lasers offers stark advantages utilizing the superior beam quality, high volumetric tissue removal rates of thulium lasers with minimal residual thermal footprint in the tissue and avoiding damage to delicate sub-surface structures (e.g., nerves and microvessels); which has not been showcased before. A bench-top system is constructed, using a 15W 1940nm nanosecond pulsed Tm fiber laser (500uJ pulse energy, 100ns pulse duration, 30kHz repetition rate) for removing tissue and a swept source laser (1310±70nm, 100kHz sweep rate) is utilized for OCT imaging, forming a combined Tm/OCT system - a smart laser knife. The OCT image-guidance informs the Tm laser for cutting/removal of targeted tissue structures. Tissue phantoms were constructed to demonstrate surgical incision with blood vessel avoidance on the surface where 2mm wide 600um deep cuts are executed around the vessel using OCT to guide the procedure. Cutting up to delicate subsurface blood vessels (2mm deep) is demonstrated while avoiding damage to their walls. A tissue removal rate of 5mm^3/sec is obtained from the bench-top system. We constructed a blow-off model to characterize Tm cut depths taking into account the absorption coefficients and beam delivery systems to compute Arrhenius damage integrals. The model is used to compare predicted tissue removal rate and residual thermal injury with experimental values in response to Tm laser-tissue modification.
Fang, Wei; Ni, Zhaohui; Qian, Jiaqi
2014-01-01
The proportion of end-stage renal disease (ESRD) patients on peritoneal dialysis (PD) has increased very fast in China over the last decade. Renji Hospital, affiliated with Shanghai Jiaotong University School of Medicine, is a recognized high-quality PD unit with a high PD utilization rate, excellent patient and technique survival (1-year and 5-year patient survival rate of 93% and 71%, and 1-year and 5-year technique survival of 96% and 82%, respectively), low peritonitis rate and a well-documented good quality of life of the treated patients. We believe that a dedicated and experienced PD team, a structured patient training program, continuous patient support, establishing and utilizing standardized protocols, starting PD with low dialysis dose, monitoring key performance indicators (KPIs), and continuous quality improvement (CQI) are the key factors underlying this successful PD program. PMID:24962961
The use of structural analysis to develop antecedent-based interventions for students with autism.
Stichter, Janine P; Randolph, Jena K; Kay, Denise; Gage, Nicholas
2009-06-01
Evidence continues to maintain that the use of antecedent variables (i.e., instructional practices, and environmental characteristics) increase prosocial and adaptive behaviors of students with disabilities (e.g., Kern et al. in J Appl Behav Anal 27(1):7-19, 1994; Stichter et al. in Behav Disord 30:401-418, 2005). This study extends the literature by systematically utilizing practitioner-implemented structural analyzes within school settings to determine antecedent variables affecting the prosocial behavior of students with autism. Optimal antecedents were combined into intervention packages and assessed utilizing a multiple baseline design across settings. All three students demonstrated improvement across all three settings. Rates of engagement and social interaction were obtained from classroom peers to serve as benchmark data. Findings indicate that practitioners can implement structural analyzes and design corresponding interventions for students with ASD within educational settings.
Microbial Cellulose Utilization: Fundamentals and Biotechnology
Lynd, Lee R.; Weimer, Paul J.; van Zyl, Willem H.; Pretorius, Isak S.
2002-01-01
Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for “consolidated bioprocessing” (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts. PMID:12209002
Structural dynamic analysis of the Space Shuttle Main Engine
NASA Technical Reports Server (NTRS)
Scott, L. P.; Jamison, G. T.; Mccutcheon, W. A.; Price, J. M.
1981-01-01
This structural dynamic analysis supports development of the SSME by evaluating components subjected to critical dynamic loads, identifying significant parameters, and evaluating solution methods. Engine operating parameters at both rated and full power levels are considered. Detailed structural dynamic analyses of operationally critical and life limited components support the assessment of engine design modifications and environmental changes. Engine system test results are utilized to verify analytic model simulations. The SSME main chamber injector assembly is an assembly of 600 injector elements which are called LOX posts. The overall LOX post analysis procedure is shown.
Investigation of Blade Angle of an Open Cross-Flow Runner
NASA Astrophysics Data System (ADS)
Katayama, Yusuke; Iio, Shouichiro; Veerapun, Salisa; Uchiyama, Tomomi
2015-04-01
The aim of this study was to develop a nano-hydraulic turbine utilizing drop structure in irrigation channels or industrial waterways. This study was focused on an open-type cross-flow turbine without any attached equipment for cost reduction and easy maintenance. In this study, the authors used an artificial indoor waterfall as lab model. Test runner which is a simple structure of 20 circular arc-shaped blades sandwiched by two circular plates was used The optimum inlet blade angle and the relationship between the power performance and the flow rate approaching theoretically and experimentally were investigated. As a result, the optimum inlet blade angle due to the flow rate was changed. Additionally, allocation rate of power output in 1st stage and 2nd stage is changed by the blade inlet angle.
Hualapai Tribal Utility Development Project
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hualapai Tribal Nation
The first phase of the Hualapai Tribal Utility Development Project (Project) studied the feasibility of establishing a tribally operated utility to provide electric service to tribal customers at Grand Canyon West (see objective 1 below). The project was successful in completing the analysis of the energy production from the solar power systems at Grand Canyon West and developing a financial model, based on rates to be charged to Grand Canyon West customers connected to the solar systems, that would provide sufficient revenue for a Tribal Utility Authority to operate and maintain those systems. The objective to establish a central powermore » grid over which the TUA would have authority and responsibility had to be modified because the construction schedule of GCW facilities, specifically the new air terminal, did not match up with the construction schedule for the solar power system. Therefore, two distributed systems were constructed instead of one central system with a high voltage distribution network. The Hualapai Tribal Council has not taken the action necessary to establish the Tribal Utility Authority that could be responsible for the electric service at GCW. The creation of a Tribal Utility Authority (TUA) was the subject of the second objective of the project. The second phase of the project examined the feasibility and strategy for establishing a tribal utility to serve the remainder of the Hualapai Reservation and the feasibility of including wind energy from a tribal wind generator in the energy resource portfolio of the tribal utility (see objective 2 below). It is currently unknown when the Tribal Council will consider the implementation of the results of the study. Objective 1 - Develop the basic organizational structure and operational strategy for a tribally controlled utility to operate at the Tribe’s tourism enterprise district, Grand Canyon West. Coordinate the development of the Tribal Utility structure with the development of the Grand Canyon West Power Project construction of the power infrastructure at Grand Canyon West. Develop the maintenance and operations capacity necessary to support utility operations. Develop rates for customers on the Grand Canyon West “mini-grid” sufficient for the tribal utility to be self-sustaining. Establish an implementation strategy for tribal utility service at Grand Canyon West Objective 2 - Develop a strategy for tribal utility takeover of electric service on the Reservation. Perform a cost analysis of Reservation electrical service. Develop an implementation strategy for tribal takeover of Reservation electrical service. Examine options and costs associated with integration of the Tribe’s wind resources.« less
Promise, pitfalls of rate reform shown in Vermont experiment
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1977-03-01
Both utilities and customers are unhappy with the way existing rate structures are handling rapidly rising fixed plant expenses and operating costs. Results of an experiment by Green Mountain Power in Vermont are discussed. The residential sector one-year study tested six rates: an off-peak rate, an interruptible rate, a peak-kilowatt demand rate, a three-part demand rate, an inverted demand rate, and a contract demand rate. The most successful of the kilowatt-related rates was the peak demand rate, and the most effective rate was probably the interruptible rate. The off-peak rate provided some savings for all who tried it, although theremore » are some who would have lost money in comparison to the conventional rate. The other three rate experiments proved unsuccessful because customers could not adapt to them. (MCW)« less
Detrimental Effects of “Stretch” Goals in Specialty Substance Use Disorder Treatment Organizations
Lemoine, G. James; Blum, Terry C.; Roman, Paul M.
2016-01-01
Background “Stretch” goals, a rarely examined concept that represents seemingly impossible, highly ambitious organizational goals ostensibly established to fill performance gaps and motivate employees, are examined within a sample of substance use disorder (SUD) treatment centers in the United States in terms of their prevalence and effects on organizational behavior. Stretch goals are defined as “seemingly impossible” goals intended to motivate employees to achieve high performance. In light of the high level of environmental change and unpredictability faced by SUD treatment centers in recent decades, we theorize that stretch goals would be both common and often detrimental (in terms of capacity utilization rate and efficiency) in these settings. Methods In a longitudinal analysis of data from leaders of a representative U. S. national sample of 219 SUD treatment centers characterized by entrepreneurial management structures, we examined the prevalence of stretch goals and their impact on key outcome variables of capacity utilization rate and efficiency. Results Widespread adoption of stretch goals was found, with 43% of our sample falling within the stretch category. Stretch goals had a negative main effect on capacity utilization rate as compared to less ambitious challenging goals. Stretch and prior performance interacted to further predict capacity utilization rate, whereas stretch and slack resource availability interacted to predict center efficiency. Discussion Although stretch goals are frequently used in the SUD treatment industry, we find them mostly detrimental to performance. Stretch goals may enhance the efficiency of treatment centers with prior limited resource availability, but they are negatively associated with capacity utilization, especially in centers with a record of already strong performance. Despite the high prevalence of such goals and positive values centered on aspirational behavior, these results strongly suggest caution in such goal setting in SUD treatment centers. PMID:26976811
Accurate airway segmentation based on intensity structure analysis and graph-cut
NASA Astrophysics Data System (ADS)
Meng, Qier; Kitsaka, Takayuki; Nimura, Yukitaka; Oda, Masahiro; Mori, Kensaku
2016-03-01
This paper presents a novel airway segmentation method based on intensity structure analysis and graph-cut. Airway segmentation is an important step in analyzing chest CT volumes for computerized lung cancer detection, emphysema diagnosis, asthma diagnosis, and pre- and intra-operative bronchoscope navigation. However, obtaining a complete 3-D airway tree structure from a CT volume is quite challenging. Several researchers have proposed automated algorithms basically based on region growing and machine learning techniques. However these methods failed to detect the peripheral bronchi branches. They caused a large amount of leakage. This paper presents a novel approach that permits more accurate extraction of complex bronchial airway region. Our method are composed of three steps. First, the Hessian analysis is utilized for enhancing the line-like structure in CT volumes, then a multiscale cavity-enhancement filter is employed to detect the cavity-like structure from the previous enhanced result. In the second step, we utilize the support vector machine (SVM) to construct a classifier for removing the FP regions generated. Finally, the graph-cut algorithm is utilized to connect all of the candidate voxels to form an integrated airway tree. We applied this method to sixteen cases of 3D chest CT volumes. The results showed that the branch detection rate of this method can reach about 77.7% without leaking into the lung parenchyma areas.
A porous Cu/LDPE composite for copper-containing intrauterine contraceptive devices.
Zhang, Weiwei; Xia, Xianping; Qi, Cheng; Xie, Changsheng; Cai, Shuizhou
2012-02-01
To improve the rates of both cupric ion release and the utilization of copper in non-porous copper/low-density polyethylene (Cu/LDPE) composite, a porous Cu/LDPE composite is proposed and developed in the present work. Here 2,5-di-tert-butylhydroquinone was chosen as the porogen, ethyl acetate was chosen as the solvent for extraction, and the porous Cu/LDPE composite was obtained by using injection molding and the particulate leaching method. After any residual ethyl acetate remaining inside the porous Cu/LDPE composite had been removed by vacuum drying, the composite was characterized by X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, gas chromatography-mass spectrometry and absorption measurement. For comparison, a non-porous Cu/LDPE composite was also characterized in the same way. The results show that the porous structure was successfully introduced into the polymeric base of the non-porous Cu/LDPE composite, and the porous Cu/LDPE composite is a simple hybrid of copper particles and porous LDPE. The results also show that the introduction of a porous structure can improve the cupric ion release rate of the non-porous Cu/LDPE composite with a certain content of copper particles, indicating that the utilization rate of copper can be improved either the introduction of a porous structure, and that the porous Cu/LDPE composite is another promising material for copper-containing intrauterine devices. Copyright © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
ERIC Educational Resources Information Center
Washington, Cheryl A.
2012-01-01
This study investigated the practices, processes, and success rates of 15 entrepreneurial alliances in the Texas charter school industry. The research involved interdisciplinary industries (business and education) and focused on how a specific type of alliance structure utilized social innovation to exploit opportunity and impact change in the…
Onasoga, Olayinka A; Afolayan, Joel Adeleke; Asamabiriowei, Tariebi Florence; Jibril, Umar Nda; Imam, Abubakar Ayinla
2016-01-01
Risky sexual activity among adolescents is on the increase and contraceptive prevalence rate is low which is evidenced by high rate of teenage pregnancy in Bayelsa state, Nigeria. This study assesses the adolescents' knowledge, attitude and utilization of emergency contraceptive pills (ECP) in Amassoma Community, Bayelsa State, in the Niger Delta region of Nigeria. The study was a descriptive cross-sectional research design. A purposive sampling technique was used to select a sample of 220 respondents from the target population. Data were collected using a self-structured questionnaire. Descriptive and inferential statistics were used to analyze the data generated. Majority of the respondents had high level of knowledge and positive attitude towards emergency contraceptive pills but had low level of utilization. Concerns about what others may say, parental attitude, contraceptive availability, contraceptive accessibility, and peer influences were the major factors that influenced the utilization of contraceptive pills. There was no significant relationship between knowledge and utilization of emergency contraceptive pills, as well as level of knowledge and their utilization of emergency contraceptive pills. Adolescents in the study were more likely to use emergency contraceptive pills, if parents and others reaction to adolescents' contraceptive use were positive about those. Health care professionals, especially nurses, should organize enlightenment programs to educate adolescents, parents and the public on the benefits of adolescents' contraceptives use, especially ECP.
National Utility Rate Database: Preprint
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ong, S.; McKeel, R.
2012-08-01
When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.
Core-shell-structured nanothermites synthesized by atomic layer deposition
NASA Astrophysics Data System (ADS)
Qin, Lijun; Gong, Ting; Hao, Haixia; Wang, Keyong; Feng, Hao
2013-12-01
Thermite materials feature very exothermic solid-state redox reactions. However, the energy release rates of traditional thermite mixtures are limited by the reactant diffusion velocities. In this work, atomic layer deposition (ALD) is utilized to synthesize thermite materials with greatly enhanced reaction rates. By depositing certain types of metal oxides (oxidizers) onto a commercial Al nanopowder, core-shell-structured nanothermites can be produced. The average film deposition rate on the Al nanopowder is 0.17 nm/cycle for ZnO and 0.031 nm/cycle for SnO2. The thickness of the oxidizer layer can be precisely controlled by adjusting the ALD cycle number. The compositions, morphologies, and structures of the ALD nanothermites are characterized by X-ray photoelectron spectroscopy, scanning electron microscopy, and high-resolution transmission electron microscopy. The characterization results reveal nearly perfect coverage of the Al nanoparticles by uniform ALD oxidizer layers and confirm the formation of core-shell nanoparticles. Combustion properties of the nanothermites are probed by laser ignition technique. Reactions of the core-shell-structured nanothermites are several times faster than the mixture of nanopowders. The promoted reaction rate is mostly attributed to the uniform distribution of reactants on the nanometer scale. These core-shell-structured nanothermites provide a potential pathway to control and enhance thermite reactions.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1980-09-01
A number of investigations, including those conducted by The Aerospace Corporation and other contractors, have led to the recognition of technical, economic, and institutional issues relating to the interface between solar electric technologies and electric utility systems. These issues derive from three attributes of solar electric power concepts, including (1) the variability and unpredictability of the solar resources, (2) the dispersed nature of those resources which suggests the feasible deployment of small dispersed power units, and (3) a high initial capital cost coupled with relatively low operating costs. It is imperative that these integration issues be pursued in parallel withmore » the development of each technology if the nation's electric utility systems are to effectively utilize these technologies in the near to intermediate term. Analyses of three of these issues are presented: utility information requirements, generation mix and production cost impacts, and rate structures in the context of photovoltaic units integrated into the utility system. (WHK)« less
Toward an Urban Political Ecology of Energy Justice: The Case of Rooftop Solar in Tucson, AZ
NASA Astrophysics Data System (ADS)
Franklin, Remington Santiago
A central challenge of the twenty-first century is to transition to a low-carbon energy system to reduce the risks of climate change. For Pima County, Arizona, where electricity accounts for the majority of greenhouse gas emissions, this requires rapid deployment of grid-tied renewable energy resources. In light of this challenge, photovoltaic solar has emerged as an important solution, providing the top source of new US electric generating capacity installed in 2016. However, there is still no consensus about the optimal scale for solar (centralized power plants, or small, decentralized systems) and the socio-economic implications for low income households. This thesis explores the implications of rooftop solar for energy justice through empirical research about a southern Arizona electric utility rate case. Utilities argue that existing rate structures shift costs from solar owners to lower-income ratepayers, while critics say the utility's proposed rate changes are unjust and that rooftop solar benefits all ratepayers. Drawing on my empirical data and an urban political ecology (UPE) approach, I analyze competing narratives that speak to three types of justice: distributive, procedural, and recognition. While dominant justice claims revolve around the distribution of costs through rates, competing narratives emphasize procedural and recognition (in)justice. Focusing on political economy, power relations, and the materiality of the grid, I reframe the utility's cost shift argument as a strategic narrative and explain why this justice claim is ultimately validated. I propose that UPE can further an energy justice analysis by understanding procedural and recognition injustice as systemic products of rate of return regulation and the material configuration of the electric grid.
Ekemen, Zeynep; Ahmad, Zeeshan; Stride, Eleanor; Kaplan, David; Edirisinghe, Mohan
2013-05-13
Conventional fabrication techniques and structures employed in the design of silk fibroin (SF) based porous materials provide only limited control over pore size and require several processing stages. In this study, it is shown that, by utilizing electrohydrodynamic bubbling, not only can new hollow spherical structures of SF be formed in a single step by means of bubbles, but the resulting bubbles can serve as pore generators when dehydrated. The bubble characteristics can be controlled through simple adjustments to the processing parameters. Bubbles with diameters in the range of 240-1000 μm were fabricated in controlled fashion. FT-IR characterization confirmed that the rate of air infused during processing enhanced β-sheet packing in SF at higher flow rates. Dynamic mechanical analysis also demonstrated a correlation between air flow rate and film tensile strength. Results indicate that electrohydrodynamically generated SF and their composite bubbles can be employed as new tools to generate porous structures in a controlled manner with a range of potential applications in biocoatings and tissue engineering scaffolds.
[Kidney patients: aspects related to compliance with renal treatment].
Caraballo Nazario, G L; Lebrón de avilés, C; Dávila Torres, R R; Burgos Calderón, R
2001-12-01
The Objective of this study was identify the aspects related with the adherence of medical treatment recommended to the patients that received hemodialysis in the tertiary public hospital. A non experimental transectional correlation design was utilized in this study. Fifty-three patients constituted the population study. A structure interview was utilized to gathered the data. Descriptive statistics and Chi-square tests were utilized to analysis. The response rate was 91.0%. The 75.0% of patients not compliance with the medical treatment. Significant association between compliance variable and educational level was encountered (p < or = 0.05). This study provides important findings to will develops educative intervention in the Renal Unit, directed to improve the adherence of the patient with medical treatment.
Composite Dry Structure Cost Improvement Approach
NASA Technical Reports Server (NTRS)
Nettles, Alan; Nettles, Mindy
2015-01-01
This effort demonstrates that by focusing only on properties of relevance, composite interstage and shroud structures can be placed on the Space Launch System vehicle that simultaneously reduces cost, improves reliability, and maximizes performance, thus providing the Advanced Development Group with a new methodology of how to utilize composites to reduce weight for composite structures on launch vehicles. Interstage and shroud structures were chosen since both of these structures are simple in configuration and do not experience extreme environments (such as cryogenic or hot gas temperatures) and should represent a good starting point for flying composites on a 'man-rated' vehicle. They are used as an example only. The project involves using polymer matrix composites for launch vehicle structures, and the logic and rationale behind the proposed new methodology.
Robust analysis of semiparametric renewal process models
Lin, Feng-Chang; Truong, Young K.; Fine, Jason P.
2013-01-01
Summary A rate model is proposed for a modulated renewal process comprising a single long sequence, where the covariate process may not capture the dependencies in the sequence as in standard intensity models. We consider partial likelihood-based inferences under a semiparametric multiplicative rate model, which has been widely studied in the context of independent and identical data. Under an intensity model, gap times in a single long sequence may be used naively in the partial likelihood with variance estimation utilizing the observed information matrix. Under a rate model, the gap times cannot be treated as independent and studying the partial likelihood is much more challenging. We employ a mixing condition in the application of limit theory for stationary sequences to obtain consistency and asymptotic normality. The estimator's variance is quite complicated owing to the unknown gap times dependence structure. We adapt block bootstrapping and cluster variance estimators to the partial likelihood. Simulation studies and an analysis of a semiparametric extension of a popular model for neural spike train data demonstrate the practical utility of the rate approach in comparison with the intensity approach. PMID:24550568
International Symposium on Palaeolimnology. Abstracts
1989-09-01
Finland? 99 Siver, P. Improving palaoreconstructing efforts utilizing scaled chrysophytes: transforming scale counts to cell numbers. 100 Smol, J.P...example, to assess between core differences in diatom accumulation rates requires cross correlation or dating of individual cores; both methods have...have increased the possibilities for using such structures as paleolimnological Indicators. However, understanding of the past requires insight into the
USDA-ARS?s Scientific Manuscript database
The rapid release of tight-binding inhibitors from dead-end Rubisco complexes requires the activity of Rubisco activase, an AAA+ ATPase that utilizes chemo-mechanical energy to catalyze the reactivation of Rubisco. Activase is thought to play a central role in coordinating the rate of CO2 fixation w...
Mindful Leaders in Highly Effective Schools: A Mixed-Method Application of Hoy's M-Scale
ERIC Educational Resources Information Center
Kearney, W. Sean; Kelsey, Cheryl; Herrington, David
2013-01-01
This article presents a mixed-method study utilizing teacher ratings of principal mindfulness from 149 public schools in Texas and follow-up qualitative data analysis through semi-structured interviews conducted with the top 10 percent of princeipals identified as mindful. This research is based on the theoretical framework of mindfulness as…
Advanced multi-megawatt wind turbine design for utility application
NASA Technical Reports Server (NTRS)
Pijawka, W. C.
1984-01-01
A NASA/DOE program to develop a utility class multimegawatt wind turbine, the MOD-5A, is described. The MOD-5A features a 400 foot diameter rotor which is teetered and positioned upwind of the tower; a 7.3 megawatt power rating with a variable speed electric generating system; and a redundant rotor support and torque transmission structure. The rotor blades were fabricated from an epoxy-bonded wood laminate material which was a successful outgrowth of the MOD-OA airfoil design. Preliminary data from operational tests carried out at the NASA Plumbrook test facility are presented.
Advanced multi-megawatt wind turbine design for utility application
NASA Astrophysics Data System (ADS)
Pijawka, W. C.
1984-08-01
A NASA/DOE program to develop a utility class multimegawatt wind turbine, the MOD-5A, is described. The MOD-5A features a 400 foot diameter rotor which is teetered and positioned upwind of the tower; a 7.3 megawatt power rating with a variable speed electric generating system; and a redundant rotor support and torque transmission structure. The rotor blades were fabricated from an epoxy-bonded wood laminate material which was a successful outgrowth of the MOD-OA airfoil design. Preliminary data from operational tests carried out at the NASA Plumbrook test facility are presented.
Nishiyama, Michiko; Igawa, Hirotaka; Kasai, Tokio; Watanabe, Naoyuki
2015-02-10
In this paper, we propose a delayed transmission/reflection ratiometric reflectometry (DTR(3)) scheme using a long-gauge fiber Bragg grating (FBG), which can be used for dynamic structural deformation monitoring of structures of between a few to tens of meters in length, such as airplane wings and helicopter blades. FBG sensors used for multipoint sensing generally employ wavelength division multiplexing techniques utilizing several Bragg central wavelengths; by contrast, the DTR(3) interrogator uses a continuous pulse array based on a pseudorandom number code and a long-gauge FBG utilizing a single Bragg wavelength and composed of simple hardware devices. The DTR(3) scheme can detect distributed strain at a 50 cm spatial resolution using a long-gauge FBG with a 100 Hz sampling rate. We evaluated the strain sensing characteristics of the long-gauge FBG when attached to a 2.5 m aluminum bar and a 5.5 m helicopter blade model, determining these structure natural frequencies in free vibration tests and their distributed strain characteristics in static tests.
Research on Darrieus-type hydraulic turbine for extra-low head hydropower utilization
NASA Astrophysics Data System (ADS)
Furukawa, A.; Watanabe, S.; Okuma, K.
2012-11-01
A Darrieus-type turbine has been investigated for extra-low head hydropower utilization. In the present paper, authors'research on Darrieus-type hydraulic turbine is briefly reviewed. The working principle of Darrieus turbine is explained with advantage of its simple structure, at first. Then the fluid-dynamic difference between rotating and linear motions of a blade in a uniform flow is clarified with guiding principle of high performance design of Darrieus turbine. Cavitation problem is also described. Next, effects of duct-casing, consisting of an intake, runner section and draft tube, are discussed and a simplified structure of Darrieus turbine is shown by installing the inlet nozzle. Finally, in the practical use, an adjustment of inlet nozzle section by lowering the inlet nozzle height is proposed when flow rate is varied temporally and seasonally.
NASA Astrophysics Data System (ADS)
Yu, Peiqiang
2012-05-01
Barley inherent structures are highly associated with nutrient utilization and availability in both humans and animals. Barley has different degradation kinetics compared with other cereal grains. It has a relatively higher degradation rate and extent, which often cause digestive disorder in the rumen. Therefore understanding barley inherent structure at cellular and molecular levels and processing-induced structure changes is important, because we can manipulate barley inherent structures and digestive behaviors. Several molecular spectroscopy techniques can be used to detect barley inherent structures at cellular and molecular levels. This article reviews several applications of the IR molecular spectral bioanalytical techniques - DRIFT, FT/IR-ATR and SR-IMS for barley chemistry, molecular structure and molecular nutrition research
Quist, M.C.; Stephen, J.L.; Guy, C.S.; Schultz, R.D.
2004-01-01
Age structure, total annual mortality, and mortality caps (maximum mortality thresholds established by managers) were investigated for walleye Sander vitreus (formerly Stizostedion vitreum) populations sampled from eight Kansas reservoirs during 1991-1999. We assessed age structure by examining the relative frequency of different ages in the population; total annual mortality of age-2 and older walleyes was estimated by use of a weighted catch curve. To evaluate the utility of mortality caps, we modeled threshold values of mortality by varying growth rates and management objectives. Estimated mortality thresholds were then compared with observed growth and mortality rates. The maximum age of walleyes varied from 5 to 11 years across reservoirs. Age structure was dominated (???72%) by walleyes age 3 and younger in all reservoirs, corresponding to ages that were not yet vulnerable to harvest. Total annual mortality rates varied from 40.7% to 59.5% across reservoirs and averaged 51.1% overall (SE = 2.3). Analysis of mortality caps indicated that a management objective of 500 mm for the mean length of walleyes harvested by anglers was realistic for all reservoirs with a 457-mm minimum length limit but not for those with a 381-mm minimum length limit. For a 500-mm mean length objective to be realized for reservoirs with a 381-mm length limit, managers must either reduce mortality rates (e.g., through restrictive harvest regulations) or increase growth of walleyes. When the assumed objective was to maintain the mean length of harvested walleyes at current levels, the observed annual mortality rates were below the mortality cap for all reservoirs except one. Mortality caps also provided insight on management objectives expressed in terms of proportional stock density (PSD). Results indicated that a PSD objective of 20-40 was realistic for most reservoirs. This study provides important walleye mortality information that can be used for monitoring or for inclusion into population models; these results can also be combined with those of other studies to investigate large-scale differences in walleye mortality. Our analysis illustrates the utility of mortality caps for monitoring walleye populations and for establishing realistic management goals.
Onasoga, Olayinka A.; Afolayan, Joel Adeleke; Asamabiriowei, Tariebi Florence; Jibril, Umar Nda; Imam, Abubakar Ayinla
2016-01-01
Background and Objective: Risky sexual activity among adolescents is on the increase and contraceptive prevalence rate is low which is evidenced by high rate of teenage pregnancy in Bayelsa state, Nigeria. This study assesses the adolescents’ knowledge, attitude and utilization of emergency contraceptive pills (ECP) in Amassoma Community, Bayelsa State, in the Niger Delta region of Nigeria. Methods: The study was a descriptive cross-sectional research design. A purposive sampling technique was used to select a sample of 220 respondents from the target population. Data were collected using a self-structured questionnaire. Descriptive and inferential statistics were used to analyze the data generated. Results: Majority of the respondents had high level of knowledge and positive attitude towards emergency contraceptive pills but had low level of utilization. Concerns about what others may say, parental attitude, contraceptive availability, contraceptive accessibility, and peer influences were the major factors that influenced the utilization of contraceptive pills. There was no significant relationship between knowledge and utilization of emergency contraceptive pills, as well as level of knowledge and their utilization of emergency contraceptive pills. Conclusions and Global Health Implications: Adolescents in the study were more likely to use emergency contraceptive pills, if parents and others reaction to adolescents’ contraceptive use were positive about those. Health care professionals, especially nurses, should organize enlightenment programs to educate adolescents, parents and the public on the benefits of adolescents’ contraceptives use, especially ECP. PMID:28058193
Sacramento Municipal Utility District PV and Smart Grid Pilot at Anatolia
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rawson, Mark; Sanchez, Eddie Paul
2013-12-30
Under DE-FOA-0000085 High Penetration Solar Deployment, the U. S. Department of Energy funded agreements with SMUD and Navigant Consulting, SunPower, GridPoint, the National Renewable Energy Laboratory, and the California Energy Commission for this pilot demonstration project. Funding was $5,962,409.00. Cost share of $500,000 was also provided by the California Energy Commission. The project has strategic implications for SMUD, other utilities and the PV and energy-storage industries in business and resource planning, technology deployment and asset management. These implications include: -At this point, no dominant business models have emerged and the industry is open for new ideas. -Demonstrated two business modelsmore » for using distributed PV and energy storage, and brainstormed several dozen more, each with different pros and cons for SMUD, its customers and the industry. -Energy storage can be used to manage high penetrations of PV and mitigate potential issues such as reverse power flow, voltage control violations, power quality issues, increased wear and tear on utility equipment, and system wide power supply issues. - Smart meters are another tool utilities can use to manage high penetrations of PV. The necessary equipment and protocols exist, and the next step is to determine how to integrate the functionality with utility programs and what level of utility control is required. - Time-of-use rates for the residential customers who hosted energy storage systems did not cause a significant change in energy usage patterns. However, the rates we used were not optimized for PV and energy storage. Opportunities exist for utilities to develop new structures.« less
Oakley, Paul A.; Harrison, Donald D.; Harrison, Deed E.; Haas, Jason W.
2005-01-01
BACKGROUND Although practice protocols exist for SMT and functional rehabilitation, no practice protocols exist for structural rehabilitation. Traditional chiropractic practice guidelines have been limited to acute and chronic pain treatment, with limited inclusion of functional and exclusion of structural rehabilitation procedures. OBJECTIVE (1) To derive an evidence-based practice protocol for structural rehabilitation from publications on Clinical Biomechanics of Posture (CBP®) methods, and (2) to compare the evidence for Diversified, SMT, and CBP®. METHODS Clinical control trials utilizing CBP® methods and spinal manipulative therapy (SMT) were obtained from searches in Mantis, CINAHL, and Index Medicus. Using data from SMT review articles, evidence for Diversified Technique (as taught in chiropractic colleges), SMT, and CBP® were rated and compared. RESULTS From the evidence from Clinical Control Trials on SMT and CBP®, there is very little evidence support for Diversified (our rating = 18), as taught in chiropractic colleges, for the treatment of pain subjects, while CBP® (our rating = 46) and SMT for neck pain (rating = 58) and low back pain (our rating = 202) have evidence-based support. CONCLUSIONS While CBP® Technique has approximately as much evidence-based support as SMT for neck pain, CBP® has more evidence to support its methods than the Diversified technique taught in chiropractic colleges, but not as much as SMT for low back pain. The evolution of chiropractic specialization has occurred, and doctors providing structural-based chiropractic care require protocol guidelines for patient quality assurance and standardization. A structural rehabilitation protocol was developed based on evidence from CBP® publications. PMID:17549209
Lai, Hsien-Tang; Kung, Pei-Tseng; Su, Hsun-Pi; Tsai, Wen-Chen
2014-09-01
Limited studies with large samples have been conducted on the utilization of dental calculus scaling among people with physical or mental disabilities. This study aimed to investigate the utilization of dental calculus scaling among the national disabled population. This study analyzed the utilization of dental calculus scaling among the disabled people, using the nationwide data between 2006 and 2008. Descriptive analysis and logistic regression were performed to analyze related influential factors for dental calculus scaling utilization. The dental calculus scaling utilization rate among people with physical or mental disabilities was 16.39%, and the annual utilization frequency was 0.2 times. Utilization rate was higher among the female and non-aboriginal samples. Utilization rate decreased with increased age and disability severity while utilization rate increased with income, education level, urbanization of residential area and number of chronic illnesses. Related influential factors for dental calculus scaling utilization rate were gender, age, ethnicity (aboriginal or non-aboriginal), education level, urbanization of residence area, income, catastrophic illnesses, chronic illnesses, disability types, and disability severity significantly influenced the dental calculus scaling utilization rate. Copyright © 2014 Elsevier Ltd. All rights reserved.
Goren, Amir; Liu, Xianchen; Gupta, Shaloo; Simon, Teresa A; Phatak, Hemant
2013-01-01
This study builds upon current studies of atrial fibrillation (AF) and health outcomes by examining more comprehensively the humanistic burden of illness (quality of life, activity impairment, and healthcare resource utilization) among adult patients with AF, using a large, nationally representative sample and matched controls. Data were analyzed from the Internet-based 2009 US National Health and Wellness Survey. Outcomes were Mental and Physical Component Summary (MCS and PCS) and health utility scores from the SF-12, activity impairment, hospitalizations, and healthcare provider and emergency room (ER) visits. Patients with self-reported diagnosis of AF were matched randomly on age and gender with an equal number of respondents without AF. Generalized linear models examined outcomes as a function of AF vs. non-AF status, controlling for CHADS2 score, comorbidity counts, demographics, and clinical variables. Exploratory structural equation modeling assessed the above in an integrated model of humanistic burden. Mean age of AF patients (1,296 from a total sample of 75,000) was 64.9 years and 65.1% were male. Adjusting for covariates, compared with non-AF patients, AF patients had lower MCS, PCS, and utility scores, greater activity impairment (rate ratio = 1.26), more traditional provider visits (rate ratio = 1.43), and increased odds of ER visits (OR = 2.53) and hospitalizations (OR = 2.71). Exploratory structural equation modeling analyses revealed that persons with AF experienced a significantly higher overall humanistic burden. This study highlights and clarifies the substantial burden of AF and its implications for preparing efficacious AF management plans to address the imminent rise in prevalence.
High-performance equation solvers and their impact on finite element analysis
NASA Technical Reports Server (NTRS)
Poole, Eugene L.; Knight, Norman F., Jr.; Davis, D. Dale, Jr.
1990-01-01
The role of equation solvers in modern structural analysis software is described. Direct and iterative equation solvers which exploit vectorization on modern high-performance computer systems are described and compared. The direct solvers are two Cholesky factorization methods. The first method utilizes a novel variable-band data storage format to achieve very high computation rates and the second method uses a sparse data storage format designed to reduce the number of operations. The iterative solvers are preconditioned conjugate gradient methods. Two different preconditioners are included; the first uses a diagonal matrix storage scheme to achieve high computation rates and the second requires a sparse data storage scheme and converges to the solution in fewer iterations that the first. The impact of using all of the equation solvers in a common structural analysis software system is demonstrated by solving several representative structural analysis problems.
High-performance equation solvers and their impact on finite element analysis
NASA Technical Reports Server (NTRS)
Poole, Eugene L.; Knight, Norman F., Jr.; Davis, D. D., Jr.
1992-01-01
The role of equation solvers in modern structural analysis software is described. Direct and iterative equation solvers which exploit vectorization on modern high-performance computer systems are described and compared. The direct solvers are two Cholesky factorization methods. The first method utilizes a novel variable-band data storage format to achieve very high computation rates and the second method uses a sparse data storage format designed to reduce the number od operations. The iterative solvers are preconditioned conjugate gradient methods. Two different preconditioners are included; the first uses a diagonal matrix storage scheme to achieve high computation rates and the second requires a sparse data storage scheme and converges to the solution in fewer iterations that the first. The impact of using all of the equation solvers in a common structural analysis software system is demonstrated by solving several representative structural analysis problems.
Is chronic pain associated with somatization/hypochondriasis? An evidence-based structured review.
Fishbain, David A; Lewis, John E; Gao, Jinrun; Cole, Brandly; Steele Rosomoff, R
2009-01-01
This is an evidence-based structured review. The objectives of this review were to answer the following questions: (1) Are somatization/hypochondriasis associated with chronic pain? (2) Is the degree of somatization/hypochondriasis related to pain levels? (3) Does pain treatment improve somatization/hypochondriasis? (4) Are some pain diagnoses differentially associated with somatization/hypochondriasis? Fifty-seven studies which fulfilled inclusion criteria and had high quality scores were sorted by the above-mentioned objectives. Agency for health care policy and research guidelines were utilized to type and characterize the strength/consistency of the study evidence within each objective. Somatization and hypochondriasis were both consistently associated with chronic pain (consistency ratings B and A, respectively). Study evidence indicated a correlation between pain intensity and presence of somatization and hypochondriasis (consistency rating A and B, respectively). Pain treatment improved somatization and hypochondriasis (consistency rating B and A, respectively). Some chronic pain diagnostic groups somatized more (consistency rating B). Somatization is commonly associated with chronic pain and may relate to pain levels.
Theodoridou, Katerina; Yu, Peiqiang
2013-06-12
Protein quality relies not only on total protein but also on protein inherent structures. The most commonly occurring protein secondary structures (α-helix and β-sheet) may influence protein quality, nutrient utilization, and digestive behavior. The objectives of this study were to reveal the protein molecular structures of canola meal (yellow and brown) and presscake as affected by the heat-processing methods and to investigate the relationship between structure changes and protein rumen degradations kinetics, estimated protein intestinal digestibility, degraded protein balance, and metabolizable protein. Heat-processing conditions resulted in a higher value for α-helix and β-sheet for brown canola presscake compared to brown canola meal. The multivariate molecular spectral analyses (PCA, CLA) showed that there were significant molecular structural differences in the protein amide I and II fingerprint region (ca. 1700-1480 cm(-1)) between the brown canola meal and presscake. The in situ degradation parameters, amide I and II, and α-helix to β-sheet ratio (R_a_β) were positively correlated with the degradable fraction and the degradation rate. Modeling results showed that α-helix was positively correlated with the truly absorbed rumen synthesized microbial protein in the small intestine when using both the Dutch DVE/OEB system and the NRC-2001 model. Concerning the protein profiles, R_a_β was a better predictor for crude protein (79%) and for neutral detergent insoluble crude protein (68%). In conclusion, ATR-FT/IR molecular spectroscopy may be used to rapidly characterize feed structures at the molecular level and also as a potential predictor of feed functionality, digestive behavior, and nutrient utilization of canola feed.
Exploring Enrollment Management for an Independent, Faith-Based, Secondary School: A Case Study
ERIC Educational Resources Information Center
McMaster, Jason Andrew
2017-01-01
This single site case study looked specifically at the foundation and the structure of an independent school in California with respect to how it managed its enrollment and retention rates. For context, the institution being studied utilized a high-tuition strategy combined with a strong financial aid program. In 2012, the school peaked in its…
High data rate modem simulation for the space station multiple-access communications system
NASA Technical Reports Server (NTRS)
Horan, Stephen
1987-01-01
The communications system for the space station will require a space based multiple access component to provide communications between the space based program elements and the station. A study was undertaken to investigate two of the concerns of this multiple access system, namely, the issues related to the frequency spectrum utilization and the possibilities for higher order (than QPSK) modulation schemes for use in possible modulators and demodulators (modems). As a result of the investigation, many key questions about the frequency spectrum utilization were raised. At this point, frequency spectrum utilization is seen as an area requiring further work. Simulations were conducted using a computer aided communications system design package to provide a straw man modem structure to be used for both QPSK and 8-PSK channels.
Controlled double emulsification utilizing 3D PDMS microchannels
NASA Astrophysics Data System (ADS)
Chang, Fu-Che; Su, Yu-Chuan
2008-06-01
This paper presents a PDMS emulsification device that is capable of generating water-in-oil-in-water double emulsions in a controlled manner. Specially designed 3D microchannels are utilized to steer the independently driven water- and oil-phase flows (especially to restrict the attachment of the middle oil-phase flow on the channel surfaces), and to break the continuous flows into monodisperse double emulsions. In addition to channel geometries and fluid flow rates, surfactants and osmotic agents are employed to facilitate the breakup process and stabilize the resulting emulsion structures. In the prototype demonstration, two-level SU-8 molds were fabricated to duplicate PDMS microstructures, which were surface treated and bonded irreversibly to form 3D microchannels. Throughout the emulsification trials, dripping was intentionally induced to generate monodisperse double emulsions with single or multiple aqueous droplets inside each oil drop. It is found that the overall and core sizes of the resulting double emulsions could be adjusted independently, mainly by varying the outer and inner fluid flow rates, respectively. As such, the presented double emulsification device could potentially realize the controllability on emulsion structure and size distribution, which is desired for a variety of biological and pharmaceutical applications.
Mapping of Fab-1:VEGF Interface Using Carboxyl Group Footprinting Mass Spectrometry
NASA Astrophysics Data System (ADS)
Wecksler, Aaron T.; Kalo, Matt S.; Deperalta, Galahad
2015-12-01
A proof-of-concept study was performed to demonstrate that carboxyl group footprinting, a relatively simple, bench-top method, has utility for first-pass analysis to determine epitope regions of therapeutic mAb:antigen complexes. The binding interface of vascular endothelial growth factor (VEGF) and the Fab portion of a neutralizing antibody (Fab-1) was analyzed using carboxyl group footprinting with glycine ethyl ester (GEE) labeling. Tryptic peptides involved in the binding interface between VEGF and Fab-1 were identified by determining the specific GEE-labeled residues that exhibited a reduction in the rate of labeling after complex formation. A significant reduction in the rate of GEE labeling was observed for E93 in the VEGF tryptic peptide V5, and D28 and E57 in the Fab-1 tryptic peptides HC2 and HC4, respectively. Results from the carboxyl group footprinting were compared with the binding interface identified from a previously characterized crystal structure (PDB: 1BJ1). All of these residues are located at the Fab-1:VEGF interface according to the crystal structure, demonstrating the potential utility of carboxyl group footprinting with GEE labeling for mapping epitopes.
The causal structure of utility conditionals.
Bonnefon, Jean-François; Sloman, Steven A
2013-01-01
The psychology of reasoning is increasingly considering agents' values and preferences, achieving greater integration with judgment and decision making, social cognition, and moral reasoning. Some of this research investigates utility conditionals, ''if p then q'' statements where the realization of p or q or both is valued by some agents. Various approaches to utility conditionals share the assumption that reasoners make inferences from utility conditionals based on the comparison between the utility of p and the expected utility of q. This article introduces a new parameter in this analysis, the underlying causal structure of the conditional. Four experiments showed that causal structure moderated utility-informed conditional reasoning. These inferences were strongly invited when the underlying structure of the conditional was causal, and significantly less so when the underlying structure of the conditional was diagnostic. This asymmetry was only observed for conditionals in which the utility of q was clear, and disappeared when the utility of q was unclear. Thus, an adequate account of utility-informed inferences conditional reasoning requires three components: utility, probability, and causal structure. Copyright © 2012 Cognitive Science Society, Inc.
Flow-structure interaction simulation of voice production in a canine larynx
NASA Astrophysics Data System (ADS)
Jiang, Weili; Zheng, Xudong; Xue, Qian; Oren, Liran; Khosla, Sid
2017-11-01
Experimental measurements conducted on a hemi-larynx canine vocal fold showed that negative pressures formed in the glottis near the superior surface of the vocal fold in the closing phase even without a supra-glottal vocal tract. It was hypothesized that such negative pressures were due to intraglottal vortices caused by flow separation in a divergent vocal tract during vocal fold closing phase. This work aims to test this hypothesis from the numerical aspect. Flow-structure interaction simulations are performed in realistic canine laryngeal shapes. In the simulations, a sharp interface immersed boundary method based incompressible flow solver is utilized to model the air flow; a finite element based solid mechanics solver is utilized to model the vocal fold vibration. The geometric structure of the vocal fold and vocal tract are based on MRI scans of a mongrel canine. The vocal fold tissue is modeled as transversely isotropic nonlinear materials with a vertical stiffness gradient. Numerical indentation is first performed and compared with the experiment data to obtain the material properties. Simulation setup about the inlet and outlet pressure follows the setup in the experiment. Simulation results including the fundamental frequency, air flow rate, the divergent angle will be compared with the experimental data, providing the validation of the simulation approach. The relationship between flow separation, intra-glottal vortices, divergent angle and flow rate will be comprehensively analyzed.
Morton, Cory M; Simmel, Cassandra; Peterson, N Andrew
2014-05-01
This study investigates the relationship between concentrations of on- and off-premises alcohol outlets and rates of child abuse and neglect. Additionally, the study seeks to locate protective features of a neighborhood's built environment by investigating the potentially moderating role that access to substance abuse treatment and prevention services plays in the relationship between alcohol outlet density and child maltreatment. Using a cross-sectional design, this ecological study utilized data from 163 census tracts in Bergen County, New Jersey, on reports of child abuse and neglect, alcohol outlets, substance abuse treatment and prevention facilities, and the United States Census to investigate the linkages between socioeconomic structure, alcohol availability, and access to substance abuse service facilities on rates of child abuse and neglect. Findings indicate areas with a greater concentration of on-premises alcohol outlets (i.e., bars) had higher rates of child neglect, and those with easier access to substance abuse services had lower rates of neglect, controlling for neighborhood demographic and socioeconomic structure. Additionally, the relationship between on-premises alcohol outlet density and rates of child neglect was moderated by the presence of substance abuse service facilities. A greater concentration of off-premises outlets (i.e., liquor stores) was associated with lower rates of physical abuse. Findings suggest that the built environment and socioeconomic structure of neighborhoods have important consequences for child well-being. The implications for future research on the structural features of neighborhoods that are associated with child well-being are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.
Morton, Cory M.; Simmel, Cassandra; Peterson, N. Andrew
2014-01-01
This study investigates the relationship between concentrations of on- and off-premises alcohol outlets and rates of child abuse and neglect. Additionally, the study seeks to locate protective features of a neighborhood's built environment by investigating the potentially moderating role that access to substance abuse treatment and prevention services plays in the relationship between alcohol outlet density and child maltreatment. Using a cross-sectional design, this ecological study utilized data from 163 census tracts in Bergen County, New Jersey, on reports of child abuse and neglect, alcohol outlets, substance abuse treatment and prevention facilities, and the United States Census to investigate the linkages between socioeconomic structure, alcohol availability, and access to substance abuse service facilities on rates of child abuse and neglect. Findings indicate areas with a greater concentration of on-premises alcohol outlets (i.e., bars) had higher rates of child neglect, and those with easier access to substance abuse services had lower rates of neglect, controlling for neighborhood demographic and socioeconomic structure. Additionally, the relationship between on-premises alcohol outlet density and rates of child neglect was moderated by the presence of substance abuse service facilities. A greater concentration of off-premises outlets (i.e., liquor stores) was associated with lower rates of physical abuse. Findings suggest that the built environment and socioeconomic structure of neighborhoods have important consequences for child well-being. The implications for future research on the structural features of neighborhoods that are associated with child well-being are discussed. PMID:24529493
State Performance-Based Regulation Using Multiyear Rate Plans for U.S. Electric Utilities
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lowry, Mark Newton; Makos, Matt; Deason, Jeff
Electric utilities today must contain costs at a time when many need to modernize aging systems and all face major changes in technologies, customer preferences and competitive pressures.Most U.S. electric utility facilities are investor-owned, subject to rate and service regulation by state public utility commissions. Regulatory systems under which these utilities operate affect their performance and ability to meet these challenges. In this business environment, multiyear rate plans have some advantages over traditional rate regulation.The report focuses on key design issues and provides case studies of the multiyear rate plan approach, applicable to both vertically integrated and restructured states. Markmore » Newton Lowry and Matt Makos of Pacific Energy Group Research and Jeff Deason of Berkeley Lab authored the report; Lisa Schwartz, Berkeley Lab, was project manager and technical editor.The report is aimed primarily at state utility regulators and stakeholders in the state regulatory process. The multiyear rate approach also provides ideas on how to streamline oversight of public power utilities and rural electric cooperatives for their governing boards.Two key provisions of multiyear rate plans strengthen cost containment incentives and streamline regulation: 1. Reducing frequency of rate cases, typically to every four or five years 2. Using an attrition relief mechanism to escalate rates or revenue between rate cases to address cost pressures such as inflation and growth in number of customers, independently of the utility’s own cost Better utility performance can be achieved under well-designed multiyear rate plans while achieving lower regulatory costs. Benefits can be shared between utilities and their customers. But plans can be complex and involve significant changes in the regulatory system. Designing plans that stimulate utility performance without undue risk and share benefits fairly can be challenging.This report discusses the rationale for multiyear rate plans and their usefulness under modern business conditions. It then explains critical plan design issues and challenges and presents results from numerical research that considers the extra incentive power achieved under different plan provisions. Next, the report presents several case studies of utilities that have operated under formal multiyear rate plans or, for various reasons, have stayed out of rate cases for more than a decade. These studies consider the effect of multiyear rate plans and rate case frequency on utility cost, reliability and other performance dimensions.« less
Examining Young Recreational Male Soccer Players' Experience in Adult- and Peer-Led Structures.
Imtiaz, Faizan; Hancock, David J; Côté, Jean
2016-09-01
Youth sport has the potential to be one of the healthiest and most beneficial activities in which children can partake. Participation in a combination of adult-led and peer-led sport structures appears to lead to favorable outcomes such as enhanced physical fitness, as well as social and emotional development. The purpose of the present study was to examine the subjective and objective experiences of 27 recreational male soccer players aged 10 to 12 years old (M = 10.11 years, SD = 0.32) across adult-led and peer-led sport structures. Direct video observation and experience-rating scales were utilized in an effort to shed light on the impact of adult-led and peer-led sport structures on the same athletes. In the adult-led structures, youth experienced high levels of effort and concentration while spending more time physically or mentally engaged. Meanwhile, youth experienced high rates of prosocial behaviors, sport-related communication, and general communication during the peer-led structures. The results of the present study indicate that rather than one approach being superior to the other, both adult- and peer-led sport structures have the potential to yield unique benefits toward children's positive experiences in sport.
Generic functional requirements for a NASA general-purpose data base management system
NASA Technical Reports Server (NTRS)
Lohman, G. M.
1981-01-01
Generic functional requirements for a general-purpose, multi-mission data base management system (DBMS) for application to remotely sensed scientific data bases are detailed. The motivation for utilizing DBMS technology in this environment is explained. The major requirements include: (1) a DBMS for scientific observational data; (2) a multi-mission capability; (3) user-friendly; (4) extensive and integrated information about data; (5) robust languages for defining data structures and formats; (6) scientific data types and structures; (7) flexible physical access mechanisms; (8) ways of representing spatial relationships; (9) a high level nonprocedural interactive query and data manipulation language; (10) data base maintenance utilities; (11) high rate input/output and large data volume storage; and adaptability to a distributed data base and/or data base machine configuration. Detailed functions are specified in a top-down hierarchic fashion. Implementation, performance, and support requirements are also given.
Jonker, Arjan; Yu, Peiqiang
2017-01-01
Forages grown in temperate regions, such as alfalfa (Medicago sativa L.) and white clover (Trefolium repens L.), typically have a high nutritional value when fed to ruminants. Their high protein content and degradation rate result, however, in poor utilization of protein from the forage resulting in excessive excretion of nitrogen into the environment by the animal. Proanthocyanindins (also known as condensed tannins) found in some forage legumes such as birdsfoot trefoil (Lotus corniculatus L.), bind to dietary protein and can improve protein utilization in the animal. This review will focus on (1) the occurrence of proanthocyanidins; (2) biosynthesis and structure of proanthocyanidins; (3) effects of proanthocyanidins on protein metabolism; (4) protein precipitating capacity of proanthocyanidins and their effects on true intestinal protein adsorption by ruminants; and (5) effect on animal health, animal performance and environmental emissions. PMID:28531145
NASA Technical Reports Server (NTRS)
Buehler, Martin G. (Inventor); Nixon, Robert H. (Inventor); Soli, George A. (Inventor); Blaes, Brent R. (Inventor)
1995-01-01
A method for predicting the SEU susceptibility of a standard-cell D-latch using an alpha-particle sensitive SRAM, SPICE critical charge simulation results, and alpha-particle interaction physics. A technique utilizing test structures to quickly and inexpensively characterize the SEU sensitivity of standard cell latches intended for use in a space environment. This bench-level approach utilizes alpha particles to induce upsets in a low LET sensitive 4-k bit test SRAM. This SRAM consists of cells that employ an offset voltage to adjust their upset sensitivity and an enlarged sensitive drain junction to enhance the cell's upset rate.
A new type of single-phase five-level inverter
NASA Astrophysics Data System (ADS)
Xu, Zhi; Li, Shengnan; Qin, Risheng; Zhao, Yanhang
2017-11-01
At present, Neutral Point Clamped (NPC) multilevel inverter is widely applied in new energy field. However, it has some disadvantages including low utilization rate of direct current (DC) voltage source and the unbalance of neutral potential. Therefore, a new single-phase five level inverter is proposed in this paper. It has two stage structure, the former stage is equivalent to three level DC/DC converter, and the back stage uses H bridge to realize inverter. Compared with the original central clamp type inverter, the new five level inverter can improve the utilization of DC voltage, and realize the neutral point potential balance with hysteresis comparator.
2016-01-01
Aluminum alkoxide complexes (2) of salen ligands with a three-carbon linker and para substituents having variable electron-withdrawing capabilities (X = NO2, Br, OMe) were prepared, and the kinetics of their ring-opening polymerization (ROP) of ε-caprolactone (CL) were investigated as a function of temperature, with the aim of drawing comparisons to similar systems with two-carbon linkers investigated previously (1). While 1 and 2 exhibit saturation kinetics and similar dependences of their ROP rates on substituents X (invariant Keq, similar Hammett ρ = +1.4(1) and 1.2(1) for k2, respectively), ROP by 2 was significantly faster than for 1. Theoretical calculations confirm that, while the reactant structures differ, the transition state geometries are quite similar, and by analyzing the energetics of the involved distortions accompanying the structural changes, a significant contribution to the basis for the rate differences was identified. Using this knowledge, a simplified computational method for evaluating ligand structural influences on cyclic ester ROP rates is proposed that may have utility for future catalyst design. PMID:26900488
Roebuck, M Christopher; Liberman, Joshua N
2009-06-01
To study the impact of various elements of pharmacy benefit design on both the absolute and relative utilization of generics, brands, retail pharmacy, and mail service. Panel data on 1,074 plan sponsors covering 21.6 million individuals over 12 calendar quarters (2005-2007). A retrospective analysis of pharmacy claims. To control for potential endogeneity, linear fixed effects models were estimated for each of six dependent variables: the generic utilization rate, the brand utilization rate, the generic dispensing rate (GDR), the retail pharmacy utilization rate, the mail service utilization rate, and the mail distribution rate. Most member cost-share variables were nonlinearly associated with changes in prescription drug utilization. Marginal effects were generally greater in magnitude for brand out-of-pocket costs than for generic out-of-pocket costs. Time dummies, as well as other pharmacy benefit design elements, also yielded significant results. Prior estimates of the effect of member cost sharing on prescription drug utilization may be biased if complex benefit designs, mail service fulfillment, and unmeasured factors such as pharmaceutical pipelines are not accounted for. Commonly cited relative utilization metrics, such as GDR, may be misleading if not examined alongside absolute prescription drug utilization.
Leong, Victoria; Goswami, Usha
2014-01-01
Dyslexia is associated with impaired neural representation of the sound structure of words (phonology). The “phonological deficit” in dyslexia may arise in part from impaired speech rhythm perception, thought to depend on neural oscillatory phase-locking to slow amplitude modulation (AM) patterns in the speech envelope. Speech contains AM patterns at multiple temporal rates, and these different AM rates are associated with phonological units of different grain sizes, e.g., related to stress, syllables or phonemes. Here, we assess the ability of adults with dyslexia to use speech AMs to identify rhythm patterns (RPs). We study 3 important temporal rates: “Stress” (~2 Hz), “Syllable” (~4 Hz) and “Sub-beat” (reduced syllables, ~14 Hz). 21 dyslexics and 21 controls listened to nursery rhyme sentences that had been tone-vocoded using either single AM rates from the speech envelope (Stress only, Syllable only, Sub-beat only) or pairs of AM rates (Stress + Syllable, Syllable + Sub-beat). They were asked to use the acoustic rhythm of the stimulus to identity the original nursery rhyme sentence. The data showed that dyslexics were significantly poorer at detecting rhythm compared to controls when they had to utilize multi-rate temporal information from pairs of AMs (Stress + Syllable or Syllable + Sub-beat). These data suggest that dyslexia is associated with a reduced ability to utilize AMs <20 Hz for rhythm recognition. This perceptual deficit in utilizing AM patterns in speech could be underpinned by less efficient neuronal phase alignment and cross-frequency neuronal oscillatory synchronization in dyslexia. Dyslexics' perceptual difficulties in capturing the full spectro-temporal complexity of speech over multiple timescales could contribute to the development of impaired phonological representations for words, the cognitive hallmark of dyslexia across languages. PMID:24605099
Al-Thani, Mohamed H; Sadoun, Eman; Al-Thani, Al-Anoud; Khalifa, Shamseldin A; Sayegh, Suzan; Badawi, Alaa
2014-12-01
Developing effective public health policies and strategies for interventions necessitates an assessment of the structure, dynamics, disease rates and causes of death in a population. Lately, Qatar has undertaken development resurgence in health and economy that resulted in improving the standard of health services and health status of the entire Qatari population (i.e., Qatari nationals and non-Qatari residents). No study has attempted to evaluate the population structure/dynamics and recent changes in disease-related mortality rates among Qatari nationals. The present study examines the population structure/dynamics and the related changes in the cause-specific mortality rates and disease prevalence in the Qatari nationals. This is a retrospective, analytic descriptive analysis covering a period of 5years (2007-2011) and utilizes a range of data sources from the State of Qatar including the population structure, disease-related mortality rates, and the prevalence of a range of chronic and infectious diseases. Factors reflecting population dynamics such as crude death (CDR), crude birth (CBR), total fertility (TFR) and infant mortality (IMR) rates were also calculated. The Qatari nationals is an expansive population with an annual growth rate of ∼4% and a stable male:female ratio. The CDR declined by 15% within the study period, whereas the CBR was almost stable. The total disease-specific death rate, however, was decreased among the Qatari nationals by 23% due to the decline in mortality rates attributed to diseases of the blood and immune system (43%), nervous system (44%) and cardiovascular system (41%). There was a high prevalence of a range of chronic diseases, whereas very low frequencies of the infectious diseases within the study population. Public health strategies, approaches and programs developed to reduce disease burden and the related death, should be tailored to target the population of Qatari nationals which exhibits characteristics that vary from the entire Qatari population. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.
Calculating utilization rates for rubber tired grapple skidders in the Southern United States
Jason D. Thompson
2001-01-01
Utilization rate is an important factor in calculating machine rates for forest harvesting machines. Machine rates allow an evaluation of harvesting system costs and facilitate comparisons between different systems and machines. There are many factors that affect utilization rate. These include mechanical delays, non-mechanical delays, operational lost time, and...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Energy and Resources Group, University of California, Berkeley; Darghouth, Naim R.; Barbose, Galen
2011-06-01
Net metering has become a widespread mechanism in the U.S. for supporting customer adoption of distributed photovoltaics (PV), but has faced challenges as PV installations grow to a larger share of generation in a number of states. This paper examines the value of the bill savings that customers receive under net metering, and the associated role of retail rate design, based on a sample of approximately two hundred residential customers of California's two largest electric utilities. We find that the bill savings per kWh of PV electricity generated varies by more than a factor of four across the customers inmore » the sample, which is largely attributable to the inclining block structure of the utilities' residential retail rates. We also compare the bill savings under net metering to that received under three potential alternative compensation mechanisms, based on California's Market Price Referent (MPR). We find that net metering provides significantly greater bill savings than a full MPR-based feed-in tariff, but only modestly greater savings than alternative mechanisms under which hourly or monthly net excess generation is compensated at the MPR rate.« less
Intergenerational redistribution in a small open economy with endogenous fertility.
Kolmar, M
1997-08-01
The literature comparing fully funded (FF) and pay-as-you-go (PAYG) financed public pension systems in small, open economies stresses the importance of the Aaron condition as an empirical measure to decide which system can be expected to lead to a higher long-run welfare. A country with a PAYG system has a higher level of utility than a country with a FF system if the growth rate of total wage income exceeds the interest rate. Endogenizing population growth makes one determinant of the growth rate of wage incomes endogenous. The author demonstrates why the Aaron condition ceases to be a good indicator in this case. For PAYG-financed pension systems, claims can be calculated according to individual contributions or the number of children in a family. Analysis determined that for both structural determinants there is no interior solution of the problem of intergenerational utility maximization. Pure systems are therefore always welfare maximizing. Moreover, children-related pension claims induce a fiscal externality which tends to be positive. The determination of the optimal contribution rate shows that the Aaron condition is generally a misleading indicator for the comparison of FF and PAYG-financed pension systems.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wessler, E.
1993-07-01
The acid rain provisions of the Clean Air Act Amendments of 1990 (CAAA) created an allowance trading program for SO{sub 2} emissions from electric utility power plants. Theoretically, the trading program will provide utilities the flexibility to control their SO{sub 2} emissions at minimum aggregate societal costs. The trading program is a significant change from command-and-control environmental policies. A continuing concern is whether the market-oriented trading program is compatible with the pervasive rate regulation of the electric utility industry. Economists accept traditional rate regulation policies tend to provide incentives for utilities to minimize risks, rather than costs. To the extentmore » that this is true, the allowance trading experiment is not likely to be successful. A number of commenters have described proposals for alternative regulatory policies to provide utilities with appropriate incentives for cost-minimization. These proposals focus on utility incentives at a {open_quotes}macro{close_quotes} level This paper has a {open_quotes}micro{close_quotes} level focus. It examines options for ratemaking that may also influence utility incentives for cost-minimization to provide a structured discussion of the different types of transactions that involve allowances. Emphasis is on the implications of allowance trading on ratemaking for wholesale power sales. Some of the same considerations that apply to wholesale ratemaking may also apply to retail ratemaking. Four generic types of allowance transactions are examined: Type 1: Unbundled Allowance Sales, Type 2: Wholesale Power Sales, Type 3: Pooling Arrangements, and Type 4: Holding Company Transactions. Each of these four generic allowance transactions is assessed along two 3 dimensions: jurisdictional issues and wholesale ratemaking considerations.« less
Utilization rates of knee-arthroplasty in OECD countries.
Pabinger, C; Lothaller, H; Geissler, A
2015-10-01
The number of knee arthroplasties and the prevalence of obesity are increasing exponentially. To date there have been no published reviews on utilization rates of knee arthroplasty in OECD countries. We analysed economic, medical and population data relating to knee arthroplasty surgeries performed in OECD countries. Gross domestic product (GDP), health expenditures, obesity prevalence, knee arthroplasty utilization rates and growth in knee arthroplasty rates per 100,000 population were assessed for total population, for patients aged 65 years and over, and patients aged 64 years and younger. Obesity prevalence and utilization of knee arthroplasty have increased significantly in the past. The mean utilization rate of knee arthroplasty was 150 (22-235) cases per 100,000 total population in 2011. The strongest annual increase (7%) occurred in patients 64 years and under. Differences between individual countries can be explained by economic and medical patterns, with countries with higher medical expenditures and obesity prevalence having significantly higher utilization rates. Countries with lower utilization rates have significantly higher growth in utilization rates. The future demand for knee prostheses will increase x-fold by 2030, with exact rates dependant upon economic, social and medical factors. We observed a 10-fold variation in the utilization of knee arthroplasty among OECD countries. A significant and strong correlation of GDP, health expenditures and obesity prevalence with utilization of knee arthroplasty was found. Patients aged 64 years and younger show a two-fold higher growth rate in knee arthroplasty compared to the older population. This trend could result in a four-fold demand for knee arthroplasty in OECD countries by 2030. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.
Bates, Jonathan; Parzynski, Craig S; Dhruva, Sanket S; Coppi, Andreas; Kuntz, Richard; Li, Shu-Xia; Marinac-Dabic, Danica; Masoudi, Frederick A; Shaw, Richard E; Warner, Frederick; Krumholz, Harlan M; Ross, Joseph S
2018-06-12
To estimate medical device utilization needed to detect safety differences among implantable cardioverter defibrillators (ICDs) generator models and compare these estimates to utilization in practice. We conducted repeated sample size estimates to calculate the medical device utilization needed, systematically varying device-specific safety event rate ratios and significance levels while maintaining 80% power, testing 3 average adverse event rates (3.9, 6.1, and 12.6 events per 100 person-years) estimated from the American College of Cardiology's 2006 to 2010 National Cardiovascular Data Registry of ICDs. We then compared with actual medical device utilization. At significance level 0.05 and 80% power, 34% or fewer ICD models accrued sufficient utilization in practice to detect safety differences for rate ratios <1.15 and an average event rate of 12.6 events per 100 person-years. For average event rates of 3.9 and 12.6 events per 100 person-years, 30% and 50% of ICD models, respectively, accrued sufficient utilization for a rate ratio of 1.25, whereas 52% and 67% for a rate ratio of 1.50. Because actual ICD utilization was not uniformly distributed across ICD models, the proportion of individuals receiving any ICD that accrued sufficient utilization in practice was 0% to 21%, 32% to 70%, and 67% to 84% for rate ratios of 1.05, 1.15, and 1.25, respectively, for the range of 3 average adverse event rates. Small safety differences among ICD generator models are unlikely to be detected through routine surveillance given current ICD utilization in practice, but large safety differences can be detected for most patients at anticipated average adverse event rates. Copyright © 2018 John Wiley & Sons, Ltd.
Medicaid Managed Care Structures and Care Coordination.
Gilchrist-Scott, Douglas H; Feinstein, James A; Agrawal, Rishi
2017-09-01
Child enrollment in Medicaid managed care (MMC) has expanded dramatically, primarily through state mandates. Care coordination is a key metric in MMC evaluation because it drives much of the proposed cost savings and may be associated with improved health outcomes and utilization. We evaluated the relationships between enrollment in 2 MMC structures, primary care case management (PCCM) and health maintenance organization (HMO) and access to and receipt of care coordination by children. Using data from the 2011/2012 National Survey of Children's Health and the Medicaid Statistical Information System state data mart, we conducted a retrospective, cross-sectional analysis of the relationships between fee-for-service, PCCM or HMO enrollment, and access to and receipt of care coordination. State-level univariate analyses and individual and state multilevel multivariable analyses evaluated correlations between MMC enrollment and care coordination, controlling for demographic characteristics and state financing levels. In univariate and multilevel multivariable analyses, the PCCM penetration rate was significantly associated with increased access to care coordination (adjusted odds ratio: 1.23, P = .034) and receipt of care coordination (adjusted odds ratio: 1.37, P = .02). The HMO penetration rate was significantly associated with lower access to care coordination (adjusted odds ratio: 0.85, P = .05) and receipt of care coordination (adjusted odds ratio: 0.71, P < .001). Fee-for-service served as the referent. State utilization of MMC varied widely. These data suggest that care coordination may be more effective in PCCM than HMO structures. States should consider care coordination outcomes when structuring their Medicaid programs. Copyright © 2017 by the American Academy of Pediatrics.
Meng, Qier; Kitasaka, Takayuki; Nimura, Yukitaka; Oda, Masahiro; Ueno, Junji; Mori, Kensaku
2017-02-01
Airway segmentation plays an important role in analyzing chest computed tomography (CT) volumes for computerized lung cancer detection, emphysema diagnosis and pre- and intra-operative bronchoscope navigation. However, obtaining a complete 3D airway tree structure from a CT volume is quite a challenging task. Several researchers have proposed automated airway segmentation algorithms basically based on region growing and machine learning techniques. However, these methods fail to detect the peripheral bronchial branches, which results in a large amount of leakage. This paper presents a novel approach for more accurate extraction of the complex airway tree. This proposed segmentation method is composed of three steps. First, Hessian analysis is utilized to enhance the tube-like structure in CT volumes; then, an adaptive multiscale cavity enhancement filter is employed to detect the cavity-like structure with different radii. In the second step, support vector machine learning will be utilized to remove the false positive (FP) regions from the result obtained in the previous step. Finally, the graph-cut algorithm is used to refine the candidate voxels to form an integrated airway tree. A test dataset including 50 standard-dose chest CT volumes was used for evaluating our proposed method. The average extraction rate was about 79.1 % with the significantly decreased FP rate. A new method of airway segmentation based on local intensity structure and machine learning technique was developed. The method was shown to be feasible for airway segmentation in a computer-aided diagnosis system for a lung and bronchoscope guidance system.
Berestovskaia, N G; Akatov, V S; Lavrovskaia, V P
1993-01-01
The energetic state of Chinese hamster fibroblasts was investigated under stationary cultural conditions and under condition of culture medium perfusion immediately above the cells. Specific rates of glucose utilization and lactate formation under the former conditions (1.88 +/- 0.2) x 10(-13) and (4.3 +/- 0.56) x 10(-13) Mole/cell/h at the logarithmic growth phase, and (0.21 +/- 0.08) x 10(-13) and (0.58 +/- 0.06) x 10(-13) Mole/cell/h at the stationary phase, respectively. In the perfused culture, specific rates of glucose utilization and formation of lactate are (4.86 +/- 0.56) x 10(-13) and (11.0 +/- 1.8) x 10(-13) Mole/cell/h at the logarithmic growth phase, and (1.57 +/- 0.14) x 10(-13) and (4.11 +/- 0.5) x 10(-13) Mole/cell/h at the stationary phase, respectively. It has been proposed that under conditions of stationary culture the fall of the rates, as the culture reaches the survival phase, is due to diffusion-dependent limitations of mass transfer between the medium and the culture. Under perfusion conditions, the fall of the rates can be explained by some deficiency of necessary components and by excessive amounts of metabolic products in the multilayer structure.
NASA Astrophysics Data System (ADS)
Chantana, Jakapan; Kato, Takuya; Sugimoto, Hiroki; Minemoto, Takashi
2018-04-01
The temperature-illumination-dependent open-circuit voltage (VOC) method is utilized to separately and quantitatively estimate carrier recombination rates at the buffer/absorber interface, in the space-charge region (SCR), and in the quasi-neutral region (QNR) of Cu(In,Ga)(S,Se)2 (CIGSSe)-based thin-film solar cells with various device structures. The correlation between open-circuit voltage deficits (VOC,def) among the carrier recombination rates of the CIGSSe solar cells with a conversion efficiency (η) above 17% is examined. It is revealed that VOC,def is decreased to 0.373 V with the reduced carrier recombination rate at the buffer/absorber interface through the development of device structures. To further decrease VOC,def (for the improved η), the carrier recombination rates in SCR and QNR are essential to be reduced by the further improvement of CIGSSe quality. Consequently, understanding the quantitative carrier recombination rates across the device, estimated from the temperature-illumination-dependent VOC method, is practical to know which part of the solar cell needs to be developed for high η above 20%.
Utilization rates of hip arthroplasty in OECD countries.
Pabinger, C; Geissler, A
2014-06-01
Hip arthroplasty and revision surgery is growing exponentially in OECD countries, but rates vary between countries. We extracted economic data and utilization rates data about hip arthroplasty done in OECD countries between 1990 and 2011. Absolute number of implantations and compound annual growth rates were computed per 100,000 population and for patients aged 65 years old and over and for patients aged 64 years and younger. In the majority of OECD countries, there has been a significant increase in the utilization of total hip arthroplasty in the last 10 years, but rates vary to a great extent: In the United States, Switzerland, and Germany the utilization rate exceeds 200/100,000 population whereas in Spain and Mexico rates are 102 and 8, respectively. There is a strong correlation between gross domestic product (GDP) and health care expenditures per capita with utilization rate. Utilization rates in all age groups have continued to rise up to present day. A seven fold higher growth rate was seen in patients aged 64 years and younger as compared to older patients. We observed a 38-fold variation in the utilization of hip arthroplasty among OECD countries, correlating with GDP and health care expenditures. Over recent years, there has been an increase in the utilization rate in most countries. This was particularly evident in the younger patients. Due to increasing life expectancy and the disproportionally high use of arthroplasty in younger patients we expect an exponential increase of revision rate in the future. Copyright © 2014 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.
Selective Iterative Waterfilling for Digital Subscriber Lines
NASA Astrophysics Data System (ADS)
Xu, Yang; Le-Ngoc, Tho; Panigrahi, Saswat
2007-12-01
This paper presents a high-performance, low-complexity, quasi-distributed dynamic spectrum management (DSM) algorithm suitable for DSL systems. We analytically demonstrate that the rate degradation of the distributed iterative waterfilling (IW) algorithm in near-far scenarios is caused by the insufficient utilization of all available frequency and power resources due to its nature of noncooperative game theoretic formulation. Inspired by this observation, we propose the selective IW (SIW) algorithm that can considerably alleviate the performance degradation of IW by applying IW selectively to different groups of users over different frequency bands so that all the available resources can be fully utilized. For [InlineEquation not available: see fulltext.] users, the proposed SIW algorithm needs at most [InlineEquation not available: see fulltext.] times the complexity of the IW algorithm, and is much simpler than the centralized optimal spectrum balancing (OSB), while it can offer a rate performance much better than that of the IW and close to the maximum possible rate region computed by the OSB in realistic near-far DSL scenarios. Furthermore, its predominantly distributed structure makes it suitable for DSL implementation.
Varga, Leah M.; Surratt, Hilary L.
2014-01-01
Background Patterns of social and structural factors experienced by vulnerable populations may negatively affect willingness and ability to seek out health care services, and ultimately, their health. Methods The outcome variable was utilization of health care services in the previous 12 months. Using Andersen’s Behavioral Model for Vulnerable Populations, we examined self-reported data on utilization of health care services among a sample of 546 Black, street-based female sex workers in Miami, Florida. To evaluate the impact of each domain of the model on predicting health care utilization, domains were included in the logistic regression analysis by blocks using the traditional variables first and then adding the vulnerable domain variables. Findings The most consistent variables predicting health care utilization were having a regular source of care and self-rated health. The model that included only enabling variables was the most efficient model in predicting health care utilization. Conclusions Any type of resource, link, or connection to or with an institution, or any consistent point of care contributes significantly to health care utilization behaviors. A consistent and reliable source for health care may increase health care utilization and subsequently decrease health disparities among vulnerable and marginalized populations, as well as contribute to public health efforts that encourage preventive health. PMID:24657047
Exploration of sustainable development by applying green economy indicators.
Chen, Yungkun; Chen, Chia-Yon; Hsieh, Tsuifang
2011-11-01
Following the global trend of sustainable development, development of green economy is the best way of slowing the negative ecological and environmental impact. This research establishes the Taiwan's green economic indicators based on the ecological footprint and energy analysis. The results are as follows: Taiwan's ecological footprint in 2008 intensity index was at 4.364; ecological overshoot index was at 3.364, showing that Taiwan's ecological system is in overload state. Moreover, this study utilizes energy analysis model to study the sustainable development of Taiwan. Findings showed that total energy use in 2008 was 3.14 × 10(23) sej (solar energy joule, sej), energy of renewable resources was 1.30 × 10(22) sej, energy of nonrenewable resources was 2.26 × 10(23) sej, energy of products from renewable resources was 1.30 × 10(22)sej, energy of currency flow was 8.02 × 10(22) sej and energy of wastes flow was 6.55 × 10(22) sej. Taiwan's energy per capita and the utilization rate of energy is lower while the environmental loading rate is significantly higher comparing to some other countries. The foregoing findings indicate that Taiwan currently belongs to an economic development pattern based on high resource consumption. The economic development is mainly established on the exploitation and utilization of nonrenewable resources. Therefore, Taiwan should change the development pattern, regulate the industrial structure, promote the utilization rate of resources, develop green pollution-free products, and enhance the sustainable development of ecological economic system.
NASA Astrophysics Data System (ADS)
Lan, Yan; You, Qingliang; Cheng, Cheng; Zhang, Suzhen; Ni, Guohua; Nagatsu, M.; Meng, Yuedong
2011-02-01
Surface modification on a polytetrafluoroethylene (PTFE) panel was performed with sequential nitrogen plasma treatments and surface-initiated polymerization. By introducing COO- groups to the surface of the PTFE panel through grafting polymerization of acrylic acid (AA), a transparent poly (acrylic acid) (PAA) membrane was achieved from acrylic acid solution. Grafting polymerization initiating from the active groups was achieved on the PTFE panel surface after the nitrogen plasma treatment. Utilizing the acrylic acid as monomers, with COO- groups as cross link sites to form reticulation structure, a transparent poly (acrylic acid) membrane with arborescent macromolecular structure was formed on the PTFE panel surface. Analysis methods, such as fourier transform infrared spectroscopy (FTIR), microscopy and X-ray photoelectron spectroscopy (XPS), were utilized to characterize the structures of the macromolecule membrane on the PTFE panel surface. A contact angle measurement was performed to characterize the modified PTFE panels. The surface hydrophilicities of modified PTFE panels were significantly enhanced after the plasma treatment. It was shown that the grafting rate is related to the treating time and the power of plasma.
Bridges, Ana J.; Andrews, Arthur R.; Deen, Tisha L.
2014-01-01
Purpose This study assessed mental health needs and service utilization patterns in a convenience sample of Hispanic immigrants. Design and Method A total of 84 adult Hispanic participants completed a structured diagnostic interview and a semistructured service utilization interview with trained bilingual research assistants. Results In the sample, 36% met diagnostic criteria for at least one mental disorder. Although 42% of the sample saw a physician in the prior year, mental health services were being rendered primarily by religious leaders. The most common barriers to service utilization were cost (59%), lack of health insurance (35%), and language (31%). Although more women than men met criteria for a disorder, service utilization rates were comparable. Participants with a mental disorder were significantly more likely to have sought medical, but not psychiatric, services in the prior year and faced significantly more cost barriers than participants without a mental disorder. Conclusions Findings suggest that Hispanic immigrants, particularly those with a mental illness, need to access services but face numerous systemic barriers. The authors recommend specific ways to make services more affordable and linguistically accessible. PMID:22802297
Influence of organizational characteristics and context on research utilization.
Cummings, Greta G; Estabrooks, Carole A; Midodzi, William K; Wallin, Lars; Hayduk, Leslie
2007-01-01
Despite three decades of empirical investigation into research utilization and a renewed emphasis on evidence-based medicine and evidence-based practice in the past decade, understanding of factors influencing research uptake in nursing remains limited. There is, however, increased awareness that organizational influences are important. To develop and test a theoretical model of organizational influences that predict research utilization by nurses and to assess the influence of varying degrees of context, based on the Promoting Action on Research Implementation in Health Services (PARIHS) framework, on research utilization and other variables. The study sample was drawn from a census of registered nurses working in acute care hospitals in Alberta, Canada, accessed through their professional licensing body (n = 6,526 nurses; 52.8% response rate). Three variables that measured PARIHS dimensions of context (culture, leadership, and evaluation) were used to sort cases into one of four mutually exclusive data sets that reflected less positive to more positive context. Then, a theoretical model of hospital- and unit-level influences on research utilization was developed and tested, using structural equation modeling, and 300 cases were randomly selected from each of the four data sets. Model test results were as follows--low context: chi2= 124.5, df = 80, p <. 001; partially low: chi2= 144.2, p <. 001, df = 80; partially high: chi2= 157.3, df = 80, p <. 001; and partially low: chi2= 146.0, df = 80, p <. 001. Hospital characteristics that positively influenced research utilization by nurses were staff development, opportunity for nurse-to-nurse collaboration, and staffing and support services. Increased emotional exhaustion led to less reported research utilization and higher rates of patient and nurse adverse events. Nurses working in contexts with more positive culture, leadership, and evaluation also reported significantly more research utilization, staff development, and lower rates of patient and staff adverse events than did nurses working in less positive contexts (i.e., those that lacked positive culture, leadership, or evaluation). The findings highlight the combined importance of culture, leadership, and evaluation to increase research utilization and improve patient safety. The findings may serve to strengthen the PARIHS framework and to suggest that, although it is not fully developed, the framework is an appropriate guide to implement research into practice.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chung, Donald; Davidson, Carolyn; Fu, Ran
The price of photovoltaic (PV) systems in the United States (i.e., the cost to the system owner) has continued to decline across all major market sectors. This report provides a Q1 2015 update regarding the prices of residential, commercial, and utility scale PV systems, based on an objective methodology that closely approximates the book value of a PV system. Several cases are benchmarked to represent common variations in business models, labor rates, and system architecture choice. We estimate a weighted-average cash purchase price of $3.09/W for residential scale rooftop systems, $2.15/W for commercial scale rooftop systems, $1.77/W for utility scalemore » systems with fixed mounting structures, and $1.91/W for utility scale systems using single-axis trackers. All systems are modeled assuming standard-efficiency, polycrystalline-silicon PV modules, and further assume installation within the United States.« less
Wind Technology Modeling Within the System Advisor Model (SAM) (Poster)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Blair, N.; Dobos, A.; Ferguson, T.
This poster provides detail for implementation and the underlying methodology for modeling wind power generation performance in the National Renewable Energy Laboratory's (NREL's) System Advisor Model (SAM). SAM's wind power model allows users to assess projects involving one or more large or small wind turbines with any of the detailed options for residential, commercial, or utility financing. The model requires information about the wind resource, wind turbine specifications, wind farm layout (if applicable), and costs, and provides analysis to compare the absolute or relative impact of these inputs. SAM is a system performance and economic model designed to facilitate analysismore » and decision-making for project developers, financers, policymakers, and energy researchers. The user pairs a generation technology with a financing option (residential, commercial, or utility) to calculate the cost of energy over the multi-year project period. Specifically, SAM calculates the value of projects which buy and sell power at retail rates for residential and commercial systems, and also for larger-scale projects which operate through a power purchase agreement (PPA) with a utility. The financial model captures complex financing and rate structures, taxes, and incentives.« less
Assessing the sustainability of lead utilization in China.
Sun, Lingyu; Zhang, Chen; Li, Jinhui; Zeng, Xianlai
2016-12-01
Lead is not only one of heavy metals imposing environment and health risk, but also critical resource to maintain sustainable development of many industries. Recently, due to the shortage of fossil fuels, clean energy vehicles, including electric bicycle, have emerged and are widely adopted soon in the world. China became the world's largest producer of primary lead and a very significant consumer in the past decade, which has strained the supplies of China's lead deposits from lithosphere and boost the anthropogenic consumption of metallic lead and lead products. Here we summarize that China's lead demand will continually increase due to the rapid growth of electric vehicle, resulting in a short carrying duration of lead even with full lead recycling. With these applications increasing at an annual rate of 2%, the carrying duration of lead resource until 2030 will oblige that recycling rate should be not less than 90%. To sustain lead utilization in China, one approach would be to improve the utilization technology, collection system and recycling technology towards closed-loop supply chain. Other future endeavors should include optimizing lead industrial structure and development of new energy. Copyright © 2016 Elsevier Ltd. All rights reserved.
High-Temperature Stable Anatase Titanium Oxide Nanofibers for Lithium-Ion Battery Anodes.
Lee, Sangkyu; Eom, Wonsik; Park, Hun; Han, Tae Hee
2017-08-02
Control of the crystal structure of electrochemically active materials is an important approach to fabricating high-performance electrodes for lithium-ion batteries (LIBs). Here, we report a methodology for controlling the crystal structure of TiO 2 nanofibers by adding aluminum isopropoxide to a common sol-gel precursor solution utilized to create TiO 2 nanofibers. The introduction of aluminum cations impedes the phase transformation of electrospun TiO 2 nanofibers from the anatase to the rutile phase, which inevitably occurs in the typical annealing process utilized for the formation of TiO 2 crystals. As a result, high-temperature stable anatase TiO 2 nanofibers were created in which the crystal structure was well-maintained even at high annealing temperatures of up to 700 °C. Finally, the resulting anatase TiO 2 nanofibers were utilized to prepare LIB anodes, and their electrochemical performance was compared to pristine TiO 2 nanofibers that contain both anatase and rutile phases. Compared to the electrode prepared with pristine TiO 2 nanofibers, the electrode prepared with anatase TiO 2 nanofibers exhibited excellent electrochemical performances such as an initial Coulombic efficiency of 83.9%, a capacity retention of 89.5% after 100 cycles, and a rate capability of 48.5% at a current density of 10 C (1 C = 200 mA g -1 ).
Creating Physical 3D Stereolithograph Models of Brain and Skull
Kelley, Daniel J.; Farhoud, Mohammed; Meyerand, M. Elizabeth; Nelson, David L.; Ramirez, Lincoln F.; Dempsey, Robert J.; Wolf, Alan J.; Alexander, Andrew L.; Davidson, Richard J.
2007-01-01
The human brain and skull are three dimensional (3D) anatomical structures with complex surfaces. However, medical images are often two dimensional (2D) and provide incomplete visualization of structural morphology. To overcome this loss in dimension, we developed and validated a freely available, semi-automated pathway to build 3D virtual reality (VR) and hand-held, stereolithograph models. To evaluate whether surface visualization in 3D was more informative than in 2D, undergraduate students (n = 50) used the Gillespie scale to rate 3D VR and physical models of both a living patient-volunteer's brain and the skull of Phineas Gage, a historically famous railroad worker whose misfortune with a projectile tamping iron provided the first evidence of a structure-function relationship in brain. Using our processing pathway, we successfully fabricated human brain and skull replicas and validated that the stereolithograph model preserved the scale of the VR model. Based on the Gillespie ratings, students indicated that the biological utility and quality of visual information at the surface of VR and stereolithograph models were greater than the 2D images from which they were derived. The method we developed is useful to create VR and stereolithograph 3D models from medical images and can be used to model hard or soft tissue in living or preserved specimens. Compared to 2D images, VR and stereolithograph models provide an extra dimension that enhances both the quality of visual information and utility of surface visualization in neuroscience and medicine. PMID:17971879
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-19
... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER13-1667-000] Battery Utility of Ohio, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for... Battery Utility of Ohio, LLC's application for market-based rate authority, with an accompanying rate...
Katz, Ira R.; Ignacio, Rosalinda V.; Kemp, Janet
2012-01-01
Objectives. We sought to compare suicide rates among veterans utilizing Veterans Health Administration (VHA) services versus those who did not. Methods. Suicide rates from 2005 to 2008 were estimated for veterans in the 16 states that fully participated in the National Violent Death Reporting System (NVDRS), using data from the National Death Index, NVDRS, and VHA records. Results. Between 2005 and 2008, veteran suicide rates differed by age and VHA utilization status. Among men aged 30 years and older, suicide rates were consistently higher among VHA utilizers. However, among men younger than 30 years, rates declined significantly among VHA utilizers while increasing among nonutilizers. Over these years, an increasing proportion of male veterans younger than 30 years received VHA services, and these individuals had a rising prevalence of diagnosed mental health conditions. Conclusions.The higher rates of suicide for utilizers of VHA among veteran men aged 30 and older were consistent with previous reports about which veterans utilize VHA services. The increasing rates of mental health conditions in utilizers younger than 30 years suggested that the decreasing relative rates in this group were related to the care provided, rather than to selective enrollment of those at lower risk for suicide. PMID:22390582
Numerical Analysis of the Trailblazer Inlet Flowfield for Hypersonic Mach Numbers
NASA Technical Reports Server (NTRS)
Steffen, C. J., Jr.; DeBonis, J. R.
1999-01-01
A study of the Trailblazer vehicle inlet was conducted using the Global Air Sampling Program (GASP) code for flight Mach numbers ranging from 4-12. Both perfect gas and finite rate chemical analysis were performed with the intention of making detailed comparisons between the two results. Inlet performance was assessed using total pressure recovery and kinetic energy efficiency. These assessments were based upon a one-dimensional stream-thrust-average of the axisymmetric flowfield. Flow visualization utilized to examine the detailed shock structures internal to this mixed-compression inlet. Kinetic energy efficiency appeared to be the least sensitive to differences between the perfect gas and finite rate chemistry results. Total pressure recovery appeared to be the most sensitive discriminator between the perfect gas and finite rate chemistry results for flight Mach numbers above Mach 6. Adiabatic wall temperature was consistently overpredicted by the perfect gas model for flight Mach numbers above Mach 4. The predicted shock structures were noticeably different for Mach numbers from 6-12. At Mach 4, the perfect gas and finite rate chemistry models collapse to the same result.
DePietro, Paul J; Julfayev, Elchin S; McLaughlin, William A
2013-10-21
Protein Structure Initiative:Biology (PSI:Biology) is the third phase of PSI where protein structures are determined in high-throughput to characterize their biological functions. The transition to the third phase entailed the formation of PSI:Biology Partnerships which are composed of structural genomics centers and biomedical science laboratories. We present a method to examine the impact of protein structures determined under the auspices of PSI:Biology by measuring their rates of annotations. The mean numbers of annotations per structure and per residue are examined. These are designed to provide measures of the amount of structure to function connections that can be leveraged from each structure. One result is that PSI:Biology structures are found to have a higher rate of annotations than structures determined during the first two phases of PSI. A second result is that the subset of PSI:Biology structures determined through PSI:Biology Partnerships have a higher rate of annotations than those determined exclusive of those partnerships. Both results hold when the annotation rates are examined either at the level of the entire protein or for annotations that are known to fall at specific residues within the portion of the protein that has a determined structure. We conclude that PSI:Biology determines structures that are estimated to have a higher degree of biomedical interest than those determined during the first two phases of PSI based on a broad array of biomedical annotations. For the PSI:Biology Partnerships, we see that there is an associated added value that represents part of the progress toward the goals of PSI:Biology. We interpret the added value to mean that team-based structural biology projects that utilize the expertise and technologies of structural genomics centers together with biological laboratories in the community are conducted in a synergistic manner. We show that the annotation rates can be used in conjunction with established metrics, i.e. the numbers of structures and impact of publication records, to monitor the progress of PSI:Biology towards its goals of examining structure to function connections of high biomedical relevance. The metric provides an objective means to quantify the overall impact of PSI:Biology as it uses biomedical annotations from external sources.
2013-01-01
Background Protein Structure Initiative:Biology (PSI:Biology) is the third phase of PSI where protein structures are determined in high-throughput to characterize their biological functions. The transition to the third phase entailed the formation of PSI:Biology Partnerships which are composed of structural genomics centers and biomedical science laboratories. We present a method to examine the impact of protein structures determined under the auspices of PSI:Biology by measuring their rates of annotations. The mean numbers of annotations per structure and per residue are examined. These are designed to provide measures of the amount of structure to function connections that can be leveraged from each structure. Results One result is that PSI:Biology structures are found to have a higher rate of annotations than structures determined during the first two phases of PSI. A second result is that the subset of PSI:Biology structures determined through PSI:Biology Partnerships have a higher rate of annotations than those determined exclusive of those partnerships. Both results hold when the annotation rates are examined either at the level of the entire protein or for annotations that are known to fall at specific residues within the portion of the protein that has a determined structure. Conclusions We conclude that PSI:Biology determines structures that are estimated to have a higher degree of biomedical interest than those determined during the first two phases of PSI based on a broad array of biomedical annotations. For the PSI:Biology Partnerships, we see that there is an associated added value that represents part of the progress toward the goals of PSI:Biology. We interpret the added value to mean that team-based structural biology projects that utilize the expertise and technologies of structural genomics centers together with biological laboratories in the community are conducted in a synergistic manner. We show that the annotation rates can be used in conjunction with established metrics, i.e. the numbers of structures and impact of publication records, to monitor the progress of PSI:Biology towards its goals of examining structure to function connections of high biomedical relevance. The metric provides an objective means to quantify the overall impact of PSI:Biology as it uses biomedical annotations from external sources. PMID:24139526
Family structure, victimization, and child mental health in a nationally representative sample.
Turner, Heather A; Finkelhor, David; Hamby, Sherry L; Shattuck, Anne
2013-06-01
Utilizing the 2008 National Survey of Children's Exposure to Violence (NatSCEV), the current study compares past year rates of 7 forms of child victimization (maltreatment, assault, peer victimization, property crime, witnessing family violence and exposure to community violence) across 3 different family structure types (two biological/adoptive parents, single parent, step/cohabiting family) among a representative sample of 4046 U.S. children ages 2-17. The study also considers whether certain social-contextual risk factors help to explain family structure variations in victimization, and the extent to which victimization exposure accounts for family structure differences in distress symptom levels. Findings showed significantly elevated rates of almost all types of victimization among children in both nontraditional family types, relative to those living with two biological/adoptive parents. Factors associated with increased victimization risk in these families include high parental conflict, drug or alcohol problems, family adversity, and community disorder. A summary measure of children's exposure to multiple forms of victimization was the strongest predictor of distress symptoms. Copyright © 2013 Elsevier Ltd. All rights reserved.
Transition in Pulsatile Pipe Flow
NASA Astrophysics Data System (ADS)
Vlachos, Pavlos; Brindise, Melissa
2016-11-01
Transition has been observed to occur in the aorta, and stenotic vessels, where pulsatile flow exists. However, few studies have investigated the characteristics and effects of transition in oscillating or pulsatile flow and none have utilized a physiological waveform. In this work, we explore transition in pipe flow using three pulsatile waveforms which all maintain the same mean and maximum flow rates and range to zero flow, as is physiologically typical. Velocity fields were obtained using planar particle image velocimetry for each pulsatile waveform at six mean Reynolds numbers ranging between 500 and 4000. Turbulent statistics including turbulent kinetic energy (TKE) and Reynolds stresses were computed. Quadrant analysis was used to identify characteristics of the production and dissipation of turbulence. Coherent structures were identified using the λci method. We developed a wavelet-Hilbert time-frequency analysis method to identify high frequency structures and compared these to the coherent structures. The results of this study demonstrate that the different pulsatile waveforms induce different levels of TKE and high frequency structures, suggesting that the rates of acceleration and deceleration influence the onset and development of transition.
Classification of mathematics deficiency using shape and scale analysis of 3D brain structures
NASA Astrophysics Data System (ADS)
Kurtek, Sebastian; Klassen, Eric; Gore, John C.; Ding, Zhaohua; Srivastava, Anuj
2011-03-01
We investigate the use of a recent technique for shape analysis of brain substructures in identifying learning disabilities in third-grade children. This Riemannian technique provides a quantification of differences in shapes of parameterized surfaces, using a distance that is invariant to rigid motions and re-parameterizations. Additionally, it provides an optimal registration across surfaces for improved matching and comparisons. We utilize an efficient gradient based method to obtain the optimal re-parameterizations of surfaces. In this study we consider 20 different substructures in the human brain and correlate the differences in their shapes with abnormalities manifested in deficiency of mathematical skills in 106 subjects. The selection of these structures is motivated in part by the past links between their shapes and cognitive skills, albeit in broader contexts. We have studied the use of both individual substructures and multiple structures jointly for disease classification. Using a leave-one-out nearest neighbor classifier, we obtained a 62.3% classification rate based on the shape of the left hippocampus. The use of multiple structures resulted in an improved classification rate of 71.4%.
The influence of parenting on early childhood health and health care utilization.
Serbin, Lisa A; Hubert, Michele; Hastings, Paul D; Stack, Dale M; Schwartzman, Alex E
2014-01-01
This study examined whether parenting, specifically parental support, structure, and behavioral control, predicted early childhood health care use and moderated the negative effects of socioeconomic disadvantage. A sample of 250 parent-child dyads from a longitudinal intergenerational research program participated. Greater parental support was associated with increased rates of nonemergency care and a higher ratio of outpatient to emergency room (ER) services, a pattern reflecting better health and service use. Support also moderated the negative effects of disadvantaged family background. Greater behavioral control by parents predicted lower rates of both nonemergency care and ER visits. Structured parenting and behavioral control were associated with lower rates of respiratory illness. This study highlights the importance of considering parenting practices when examining variations in early childhood health and health care, and the relevance of parental behavior in designing interventions for high-risk populations. © The Author 2014. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
DNA/RNA transverse current sequencing: intrinsic structural noise from neighboring bases
Alvarez, Jose R.; Skachkov, Dmitry; Massey, Steven E.; Kalitsov, Alan; Velev, Julian P.
2015-01-01
Nanopore DNA sequencing via transverse current has emerged as a promising candidate for third-generation sequencing technology. It produces long read lengths which could alleviate problems with assembly errors inherent in current technologies. However, the high error rates of nanopore sequencing have to be addressed. A very important source of the error is the intrinsic noise in the current arising from carrier dispersion along the chain of the molecule, i.e., from the influence of neighboring bases. In this work we perform calculations of the transverse current within an effective multi-orbital tight-binding model derived from first-principles calculations of the DNA/RNA molecules, to study the effect of this structural noise on the error rates in DNA/RNA sequencing via transverse current in nanopores. We demonstrate that a statistical technique, utilizing not only the currents through the nucleotides but also the correlations in the currents, can in principle reduce the error rate below any desired precision. PMID:26150827
Pogorzelska, Monika; Stone, PatriciaW.; Larson, Elaine L.
2012-01-01
Background The study objective is to describe infection control policies aimed at multidrug-resistant organisms (MDRO) in California hospitals and assess the relationship among these policies, structural characteristics, and rates of methicillin-resistant Staphylococcus aureus (MRSA) or vancomycin-resistant Enterococcus (VRE) bloodstream infections and Clostridium difficile infections. Methods Data on infection control policies, structural characteristics, and MDRO rates were collected through a 2010 survey of California infection control departments. Bivariate and multivariable Poisson and negative binomial regressions were conducted. Results One hundred eighty hospitals provided data (response rate, 54%). Targeted MRSA screening upon admission was reported by the majority of hospitals (87%). The majority of hospitals implemented contact precautions for confirmed MDRO and C difficile patients; presumptive isolation/contact precautions for patients with pending screens were less frequently implemented. Few infection control policies were associated with lower MDRO rates. Hospitals with a certified infection control director had significantly lower rates of MRSA bloodstream infections (P < .05). Conclusion Although most California hospitals are involved in activities to decrease MDRO, there is variation in specific activities utilized with the most focus placed on MRSA. This study highlights the importance of certification and its significant impact on infection rates. Additional research is needed to confirm these findings. PMID:22381222
Patterns of Mental Health Care Utilization Among Sexual Orientation Minority Groups.
Platt, Lisa F; Wolf, Julia Kay; Scheitle, Christopher P
2018-01-01
Prior studies of the utilization of mental health professionals by sexual minority populations have relied on data that are now dated or not nationally representative. These studies have also provided mixed findings regarding gender differences in the utilization of mental health professionals among sexual minority individuals. Using data from the 2013-2015 National Health Interview Surveys, this study investigates (1) how sexual minority individuals compare to heterosexual participants in their utilization of mental health professionals; and (2) gender differences in that utilization. The results indicate sexual minority individuals utilize mental health care professionals at higher rates than heterosexual individuals even after controlling for measures of mental health and other demographic characteristics; this is true for both men and women. However, gender moderates the sexual minority effect on utilization rates. Sexual minority men utilize mental health professionals at a high rate, such that their utilization rates are similar to sexual minority women, contrary to the gender gap seen among heterosexuals.
Structured functional additive regression in reproducing kernel Hilbert spaces.
Zhu, Hongxiao; Yao, Fang; Zhang, Hao Helen
2014-06-01
Functional additive models (FAMs) provide a flexible yet simple framework for regressions involving functional predictors. The utilization of data-driven basis in an additive rather than linear structure naturally extends the classical functional linear model. However, the critical issue of selecting nonlinear additive components has been less studied. In this work, we propose a new regularization framework for the structure estimation in the context of Reproducing Kernel Hilbert Spaces. The proposed approach takes advantage of the functional principal components which greatly facilitates the implementation and the theoretical analysis. The selection and estimation are achieved by penalized least squares using a penalty which encourages the sparse structure of the additive components. Theoretical properties such as the rate of convergence are investigated. The empirical performance is demonstrated through simulation studies and a real data application.
Chen, Li; Zhang, Ruiyuan; Min, Ting; ...
2018-05-19
For applications of reactive transport in porous media, optimal porous structures should possess both high surface area for reactive sites loading and low mass transport resistance. Hierarchical porous media with a combination of pores at different scales are designed for this purpose. In this paper, using the lattice Boltzmann method, pore-scale numerical studies are conducted to investigate diffusion-reaction processes in 2D hierarchical porous media generated by self-developed reconstruction scheme. Complex interactions between porous structures and reactive transport are revealed under different conditions. Simulation results show that adding macropores can greatly enhance the mass transport, but at the same time reducemore » the reactive surface, leading to complex change trend of the total reaction rate. Effects of gradient distribution of macropores within the porous medium are also investigated. It is found that a front-loose, back-tight (FLBT) hierarchical structure is desirable for enhancing mass transport, increasing total reaction rate, and improving catalyst utilization. Finally, on the whole, from the viewpoint of reducing cost and improving material performance, hierarchical porous structures, especially gradient structures with the size of macropores gradually decreasing along the transport direction, are desirable for catalyst application.« less
Monaural Sound Localization Based on Reflective Structure and Homomorphic Deconvolution
Park, Yeonseok; Choi, Anthony
2017-01-01
The asymmetric structure around the receiver provides a particular time delay for the specific incoming propagation. This paper designs a monaural sound localization system based on the reflective structure around the microphone. The reflective plates are placed to present the direction-wise time delay, which is naturally processed by convolutional operation with a sound source. The received signal is separated for estimating the dominant time delay by using homomorphic deconvolution, which utilizes the real cepstrum and inverse cepstrum sequentially to derive the propagation response’s autocorrelation. Once the localization system accurately estimates the information, the time delay model computes the corresponding reflection for localization. Because of the structure limitation, two stages of the localization process perform the estimation procedure as range and angle. The software toolchain from propagation physics and algorithm simulation realizes the optimal 3D-printed structure. The acoustic experiments in the anechoic chamber denote that 79.0% of the study range data from the isotropic signal is properly detected by the response value, and 87.5% of the specific direction data from the study range signal is properly estimated by the response time. The product of both rates shows the overall hit rate to be 69.1%. PMID:28946625
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chen, Li; Zhang, Ruiyuan; Min, Ting
For applications of reactive transport in porous media, optimal porous structures should possess both high surface area for reactive sites loading and low mass transport resistance. Hierarchical porous media with a combination of pores at different scales are designed for this purpose. In this paper, using the lattice Boltzmann method, pore-scale numerical studies are conducted to investigate diffusion-reaction processes in 2D hierarchical porous media generated by self-developed reconstruction scheme. Complex interactions between porous structures and reactive transport are revealed under different conditions. Simulation results show that adding macropores can greatly enhance the mass transport, but at the same time reducemore » the reactive surface, leading to complex change trend of the total reaction rate. Effects of gradient distribution of macropores within the porous medium are also investigated. It is found that a front-loose, back-tight (FLBT) hierarchical structure is desirable for enhancing mass transport, increasing total reaction rate, and improving catalyst utilization. Finally, on the whole, from the viewpoint of reducing cost and improving material performance, hierarchical porous structures, especially gradient structures with the size of macropores gradually decreasing along the transport direction, are desirable for catalyst application.« less
Road map to Title I of the Public Utility Regulatory Policies Act of 1978
DOE Office of Scientific and Technical Information (OSTI.GOV)
Partridge, W.
1979-01-18
Within the next two years all electric utilities retailing over 500 million kilowatts per year will be forced into rate-making proceedings or public hearings to meet the requirements of Title I of the Public Utility Regulatory Policies Act of 1978. In these proceedings they will be required to consider the application of Federal requirements for lifeline rates, class rates based on cost of service, declining block rates, time-of-day rates, seasonal rates, interruptible rates, load management techniques, prohibitions on master metering, restrictions on use of automatic adjustment clauses, provision of consumer information, termination procedures, and restrictions on advertising. The act hasmore » immediate, significant implications for electric utility management.« less
NASA Astrophysics Data System (ADS)
Li, Xibao
Residential time-of-use (TOU) rates have been in practice in the U.S. since the 1970s. However, for institutional, political, and regulatory reasons, only a very small proportion of residential customers are actually on these schedules. In this thesis, I explore why this is the case by empirically investigating two groups of questions: (1) On the "supply" side: Do utilities choose to offer TOU rates in residential sectors on their own initiative if state commissions do not order them to do so? Since utilities have other options, what is the relationship between the TOU rate and other alternatives? To answer these questions, I survey residential tariffs offered by more than 100 major investor-owned utilities, study the impact of various factors on utilities' rate-making behavior, and examine utility revealed preferences among four rate options: seasonal rates, inverted block rates, demand charges, and TOU rates. Estimated results suggest that the scale of residential sectors and the revenue contribution from residential sectors are the only two significant factors that influence utility decisions on offering TOU rates. Technical and economic considerations are not significant statistically. This implies that the little acceptance of TOU rates is partly attributed to utilities' inadequate attention to TOU rate design. (2) On the "demand" side: For utilities offering TOU tariffs, why do only a very small proportion of residential customers choose these tariffs? What factors influence customer choices? Unlike previous studies that used individual-level experimental data, this research employs actual aggregated information from 29 utilities offering optional TOU rates. By incorporating neo-classical demand analysis into an aggregated random coefficient logit model, I investigate the impact of both price and non-price tariff characteristics and non-tariff factors on customer choice behavior. The analysis indicates that customer pure tariff preference (which captures the effect of all unincluded factors) is a crucial obstacle to the public acceptance of TOU tariffs. Besides rate levels, non-price tariff characteristics and non-tariff factors are also important in influencing customer choice. It is observed that high income home owners have very different preferences than others.
Modeling Equity for Alternative Water Rate Structures
NASA Astrophysics Data System (ADS)
Griffin, R.; Mjelde, J.
2011-12-01
The rising popularity of increasing block rates for urban water runs counter to mainstream economic recommendations, yet decision makers in rate design forums are attracted to the notion of higher prices for larger users. Among economists, it is widely appreciated that uniform rates have stronger efficiency properties than increasing block rates, especially when volumetric prices incorporate intrinsic water value. Yet, except for regions where water market purchases have forced urban authorities to include water value in water rates, economic arguments have weakly penetrated policy. In this presentation, recent evidence will be reviewed regarding long term trends in urban rate structures while observing economic principles pertaining to these choices. The main objective is to investigate the equity of increasing block rates as contrasted to uniform rates for a representative city. Using data from four Texas cities, household water demand is established as a function of marginal price, income, weather, number of residents, and property characteristics. Two alternative rate proposals are designed on the basis of recent experiences for both water and wastewater rates. After specifying a reasonable number (~200) of diverse households populating the city and parameterizing each household's characteristics, every household's consumption selections are simulated for twelve months. This procedure is repeated for both rate systems. Monthly water and wastewater bills are also computed for each household. Most importantly, while balancing the budget of the city utility we compute the effect of switching rate structures on the welfares of households of differing types. Some of the empirical findings are as follows. Under conditions of absent water scarcity, households of opposing characters such as low versus high income do not have strong preferences regarding rate structure selection. This changes as water scarcity rises and as water's opportunity costs are allowed to influence uniform rates. The welfare results of these exercises indicate that popular conceptions about increasing block rates may be incorrect insofar as the scarcity-endogenous uniform rate favors low-income households. That is, under scarcity conditions a switch from increasing block rates to full price uniform rates redistributes welfare so as to place more of the welfare burden of conservation on high-income households. Similarly, any household characteristic that tends to accompany low water use (e.g. low property value) generates a the same rate structure preference. These results are an intriguing addition to existing knowledge pertaining to the properties of increasing block rates and uniform rates with respect to criteria such as efficiency, simplicity, effectiveness, and (now) equity.
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
This bibliography provides documentation for use by state public utility commissions and major nonregulated utilities in evaluating the applicability of a wide range of electric utility rate design and regulatory concepts in light of certain regulatory objectives. Part I, Utility Regulatory Objectives, contains 2084 citations on conservation of energy and capital; efficient use of facilities and resources; and equitable rates to electricity consumers. Part II, Rate Design Concepts, contains 1238 citations on time-of-day rates; seasonally-varying rates; cost-of-service rates; interruptible rates (including the accompanying use of load management techniques); declining block rates; and lifeline rates. Part III, Regulatory Concepts, contains 1282more » references on restrictions on master metering; procedures for review of automatic adjustment clauses; prohibitions of rate or regulatory discrimination against solar, wind, or other small energy systems; treatment of advertising expenses; and procedures to protect ratepayers from abrupt termination of service.« less
Beck, Andrew F; Huang, Bin; Ryan, Patrick H; Sandel, Megan T; Chen, Chen; Kahn, Robert S
2016-06-01
To assess whether population-level violent (and all) crime rates were associated with population-level child asthma utilization rates and predictive of patient-level risk of asthma reutilization after a hospitalization. A retrospective cohort study of 4638 pediatric asthma-related emergency department visits and hospitalizations between 2011 and 2013 was completed. For population-level analyses, census tract asthma utilization rates were calculated by dividing the number of utilization events within a tract by the child population. For patient-level analyses, hospitalized patients (n = 981) were followed until time of first asthma-related reutilization. The primary predictor was the census tract rate of violent crime as recorded by the police; the all crime (violent plus nonviolent) rate was also assessed. Census tract-level violent and all crime rates were significantly correlated with asthma utilization rates (both P < .0001). The violent crime rate explained 35% of the population-level asthma utilization variance and remained associated with increased utilization after adjustment for census tract poverty, unemployment, substandard housing, and traffic exposure (P = .002). The all crime rate explained 28% of the variance and was similarly associated with increased utilization after adjustment (P = .02). Hospitalized children trended toward being more likely to reutilize if they lived in higher violent (P = .1) and all crime areas (P = .01). After adjustment, neither relationship was significant. Crime data could help facilitate early identification of potentially toxic stressors relevant to the control of asthma for populations and patients. Copyright © 2016 Elsevier Inc. All rights reserved.
Beck, Andrew F.; Huang, Bin; Ryan, Patrick H.; Sandel, Megan T.; Chen, Chen; Kahn, Robert S.
2016-01-01
Objectives To assess whether population-level violent (and all) crime rates were associated with population-level child asthma utilization rates and predictive of patient-level risk of asthma reutilization after a hospitalization. Study design A retrospective cohort study of 4,638 pediatric asthma-related emergency department visits and hospitalizations between 2011 and 2013 was completed. For population-level analyses, census tract asthma utilization rates were calculated by dividing the number of utilization events within a tract by the child population. For patient-level analyses, hospitalized patients (n=981) were followed until time of first asthma-related reutilization. The primary predictor was the census tract rate of violent crime as recorded by the police; the all crime (violent plus non-violent) rate was also assessed. Results Census tract-level violent and all crime rates were significantly correlated with asthma utilization rates (both p<.0001). The violent crime rate explained 35% of the population-level asthma utilization variance and remained associated with increased utilization after adjustment for census tract poverty, unemployment, substandard housing, and traffic exposure (p=.002). The all crime rate explained 28% of the variance and was similarly associated with increased utilization after adjustment (p=.02). Hospitalized children trended toward being more likely to reutilize if they lived in higher violent (p=.1) and all crime areas (p=.01). After adjustment, neither relationship was significant. Conclusions Crime data could help facilitate early identification of potentially toxic stressors relevant to the control of asthma for populations and patients. PMID:26960918
Lori, Jody R; Munro-Kramer, Michelle L; Shifman, Jordan; Amarah, Patricia N M; Williams, Garfee
2017-03-01
Liberia in West Africa has one of the highest maternal mortality ratios in the world (990/100,000 live births). Many women in Liberia live in rural, remote villages with little access to safe maternity services. The World Health Organization has identified maternity waiting homes (MWHs) as one strategy to minimize the barrier of distance in accessing a skilled birth attendant. However, limited data exist on satisfaction with MWHs or maternal health care in Liberia. This mixed-methods case study examines women's satisfaction with their stay at a MWH and compares utilization rates before and during the Ebola outbreak. From 2012 to 2014, 650 women who stayed at one of 6 MWHs in rural Liberia during the perinatal or postnatal period were surveyed. Additionally, 60 semi-structured interviews were conducted with traditional providers, skilled birth attendants, and women utilizing the MWHs. Quantitative analyses assessed satisfaction rates before and during the Ebola outbreak. Content analysis of semi-structured interviews supplemented the quantitative data and provided a lens into the elements of satisfaction with the MWHs. The majority of women who utilized the MWHs stated they would suggest the MWH to a friend or relative who was pregnant (99.5%), and nearly all would utilize the home again (98.8%). Although satisfaction with the MWHs significantly decreased during the Ebola outbreak (P < .001), participants were satisfied overall with the MWHs. Content analysis identified areas of satisfaction that encompassed the themes of restful and supportive environment as well as areas for improvement such as lacking necessary resources and loneliness. This case study demonstrated that women using MWHs in Bong County, Liberia are generally satisfied with their experience and plan to use an MWH again during future pregnancies to access a skilled birth attendant for birth. Women are also willing to encourage family and friends to use MWHs. © 2017 by the American College of Nurse-Midwives.
NGO management and health care financing approaches in the Eastern Democratic Republic of the Congo.
Dijkzeul, D; Lynch, C A
2006-01-01
The role of cost-sharing in health care is a crucial, yet contentious issue. In conflict situations, cost-sharing becomes even more controversial as health and other institutions are failing. In such situations, NGOs manage health programmes which aim to aid populations in crisis and improve or at least sustain a deteriorating health system. This study looks at the issue of cost-sharing in the wider context of utilization rates and management approaches of three NGOs in the chronic, high-mortality crisis of the eastern DRC. Approaches to increase access to health care were found to exist, yet cost-recovery, even on the basis of maximum utilization rates, would only partially sustain the health system in the eastern DRC. Factors external to the direct management of NGO health programs, such as the wider economic and security situation, local management structures, and international donor policies, need to be taken into account for establishing more integrated management and financing approaches.
Open Globe Injury Patient Identification in Warfare Clinical Notes1
Apostolova, Emilia; White, Helen A.; Morris, Patty A.; Eliason, David A.; Velez, Tom
2017-01-01
The aim of this study is to utilize the Defense and Veterans Eye Injury and Vision Registry clinical data derived from DoD and VA medical systems which include documentation of care while in combat, and develop methods for comprehensive and reliable Open Globe Injury (OGI) patient identification. In particular, we focus on the use of free-form clinical notes, since structured data, such as diagnoses or procedure codes, as found in early post-trauma clinical records, may not be a comprehensive and reliable indicator of OGIs. The challenges of the task include low incidence rate (few positive examples), idiosyncratic military ophthalmology vocabulary, extreme brevity of notes, specialized abbreviations, typos and misspellings. We modeled the problem as a text classification task and utilized a combination of supervised learning (SVMs) and word embeddings learnt in a unsupervised manner, achieving a precision of 92.50% and a recall of89.83%o. The described techniques are applicable to patient cohort identification with limited training data and low incidence rate. PMID:29854104
Varga, Leah M; Surratt, Hilary L
2014-01-01
Patterns of social and structural factors experienced by vulnerable populations may negatively affect willingness and ability to seek out health care services, and ultimately, their health. The outcome variable was utilization of health care services in the previous 12 months. Using Andersen's Behavioral Model for Vulnerable Populations, we examined self-reported data on utilization of health care services among a sample of 546 Black, street-based, female sex workers in Miami, Florida. To evaluate the impact of each domain of the model on predicting health care utilization, domains were included in the logistic regression analysis by blocks using the traditional variables first and then adding the vulnerable domain variables. The most consistent variables predicting health care utilization were having a regular source of care and self-rated health. The model that included only enabling variables was the most efficient model in predicting health care utilization. Any type of resource, link, or connection to or with an institution, or any consistent point of care, contributes significantly to health care utilization behaviors. A consistent and reliable source for health care may increase health care utilization and subsequently decrease health disparities among vulnerable and marginalized populations, as well as contribute to public health efforts that encourage preventive health. Copyright © 2014 Jacobs Institute of Women's Health. Published by Elsevier Inc. All rights reserved.
Results of EVA/mobile transporter space station truss assembly tests
NASA Technical Reports Server (NTRS)
Watson, Judith J.; Heard, Walter L., Jr.; Bush, Harold G.; Lake, M. S.; Jensen, J. K.; Wallsom, R. E.; Phelps, J. E.
1988-01-01
Underwater neutral buoyance tests were conducted to evaluate the use of a Mobile Transporter concept in conjunction with EVA astronauts to construct the Space Station Freedom truss structure. A three-bay orthogonal tetrahedral truss configuration with a 15 foot square cross section was repeatedly assembled by a single pair of pressure suited test subjects working from the Mobile Transporter astronaut positioning devices (mobile foot restraints). The average unit assembly time (which included integrated installation of utility trays) was 27.6 s/strut, or 6 min/bay. The results of these tests indicate that EVA assembly of space station size structures can be significantly enhanced when using a Mobile Transporter equipped with astronaut positioning devices. Rapid assembly time can be expected and are dependent primarily on the rate of translation permissible for on-orbit operations. The concept used to demonstate integrated installation of utility trays requires minimal EVA handling and consequentially, as the results show, has little impact on overall assembly time.
NASA Astrophysics Data System (ADS)
Chugh, Saryu; Arivu Selvan, K.; Nadesh, RK
2017-11-01
Numerous destructive things influence the working arrangement of human body as hypertension, smoking, obesity, inappropriate medication taking which causes many contrasting diseases as diabetes, thyroid, strokes and coronary diseases. The impermanence and horribleness of the environment situation is also the reason for the coronary disease. The structure of Apache start relies on the evolution which requires gathering of the data. To break down the significance of use programming focused on data structure the Apache stop ought to be utilized and it gives various central focuses as it is fast in light as it uses memory worked in preparing. Apache Spark continues running on dispersed environment and chops down the data in bunches giving a high profitability rate. Utilizing mining procedure as a part of the determination of coronary disease has been exhaustively examined indicating worthy levels of precision. Decision trees, Neural Network, Gradient Boosting Algorithm are the various apache spark proficiencies which help in collecting the information.
Rapid adhesive bonding concepts
NASA Technical Reports Server (NTRS)
Stein, B. A.; Tyeryar, J. R.; Hodges, W. T.
1984-01-01
Adhesive bonding in the aerospace industry typically utilizes autoclaves or presses which have considerable thermal mass. As a consequence, the rates of heatup and cooldown of the bonded parts are limited and the total time and cost of the bonding process is often relatively high. Many of the adhesives themselves do not inherently require long processing times. Bonding could be performed rapidly if the heat was concentrated in the bond lines or at least in the adherends. Rapid adhesive bonding concepts were developed to utilize induction heating techniques to provide heat directly to the bond line and/or adherends without heating the entire structure, supports, and fixtures of a bonding assembly. Bonding times for specimens are cut by a factor of 10 to 100 compared to standard press bonding. The development of rapid adhesive bonding for lap shear specimens (per ASTM D1003 and D3163), for aerospace panel bonding, and for field repair needs of metallic and advanced fiber reinforced polymeric matrix composite structures are reviewed.
Energy utilization rates during shuttle extravehicular activities.
Waligora, J M; Kumar, K V
1995-01-01
The work rates or energy utilization rates during EVA are major factors in sizing of life support systems. These rates also provide a measure of ease of EVA and its cost in crew fatigue. From the first Shuttle EVA on the STS-6 mission in 1983, we have conducted 59 man-EVA and 341 man-hours of EVA. Energy utilization rates have been measured on each of these EVA. Metabolic rate was measured during each EVA using oxygen utilization corrected for suit leakage. From 1981-1987, these data were available for average data over the EVA or over large segments of the EVA. Since 1987, EVA oxygen utilization data were available at 2-minute intervals. The average metabolic rate on Shuttle EVA (194 kcal/hr.) has been significantly lower than metabolic rates during Apollo and Skylab missions. Peak rates have been below design levels, infrequent, and of short duration. The data suggest that the energy cost of tasks may be inversely related to the degree of training for the task. The data provide insight on the safety margins provided by life support designs and on the energy cost of Station construction EVA.
State formulating lifeline program
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1978-09-01
The Board of Public Utilities (BPU) of New Jersey is formulating a lifeline program which would provide low-income and elderly customers with reduced utility rates. It is estimated that 30% of the households in New Jersey will qualify for the program. While the legislation calls for the lowest effective rate of any customer class, each utility would have its own lifeline program because of differing rates among utility companies. Eligibility requirements would be applied statewide. The utilities will fund the new program by restructuring the existing rates for regular customers. In which case lifeline recipients' rate would decrease while regularmore » customers' bills would increase. Eventually, the BPU expects to fund about 10% of the senior citizens' portion of the program with the state's casino gambling revenues.« less
Impact of residential PV adoption on Retail Electricity Rates
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cai, DWH; Adlakha, S; Low, SH
2013-11-01
The price of electricity supplied from home rooftop photo voltaic (PV) solar cells has fallen below the retail price of grid electricity in some areas. A number of residential households have an economic incentive to install rooftop PV systems and reduce their purchases of electricity from the grid. A significant portion of the costs incurred by utility companies are fixed costs which must be recovered even as consumption falls. Electricity rates must increase in order for utility companies to recover fixed costs from shrinking sales bases. Increasing rates will, in turn, result in even more economic incentives for customers tomore » adopt rooftop PV. In this paper, we model this feedback between PV adoption and electricity rates and study its impact on future PV penetration and net-metering costs. We find that the most important parameter that determines whether this feedback has an effect is the fraction of customers who adopt PV in any year based solely on the money saved by doing so in that year, independent of the uncertainties of future years. These uncertainties include possible changes in rate structures such as the introduction of connection charges, the possibility of PV prices dropping significantly in the future, possible changes in tax incentives, and confidence in the reliability and maintainability of PV. (C) 2013 Elsevier Ltd. All rights reserved.« less
NASA Astrophysics Data System (ADS)
Vermaak, J. S.; Raubenheimer, D.
1988-01-01
An in-situ electron microscope technique was utilized to observe directly the amorphous-to-crystalline phase transformation, the isothermal growth rates, as well as the orientation and structure of the recrystallized films for the Te1-xSex alloy system for x=0.2, 0.3 and 0.4. Activation energies of E=0.91, 0.93 and 0.96 eV and crystallization temperatures of Tc=-14, 81.5 and 85°C for the three alloys, respectively, were found. In all three cases the crystallization process originated from single crystalline nuclei with a hexagonal structure and with the c-axis in general parallel to the substrate surface.
Predictive control of thermal state of blast furnace
NASA Astrophysics Data System (ADS)
Barbasova, T. A.; Filimonova, A. A.
2018-05-01
The work describes the structure of the model for predictive control of the thermal state of a blast furnace. The proposed model contains the following input parameters: coke rate; theoretical combustion temperature, comprising: natural gas consumption, blasting temperature, humidity, oxygen, blast furnace cooling water; blast furnace gas utilization rate. The output parameter is the cast iron temperature. The results for determining the cast iron temperature were obtained following the identification using the Hammerstein-Wiener model. The result of solving the cast iron temperature stabilization problem was provided for the calculated values of process parameters of the target area of the respective blast furnace operation mode.
NASA Technical Reports Server (NTRS)
Ratcliffe, James G.
2010-01-01
This paper details part of an effort focused on the development of a standardized facesheet/core peel debonding test procedure. The purpose of the test is to characterize facesheet/core peel in sandwich structure, accomplished through the measurement of the critical strain energy release rate associated with the debonding process. The specific test method selected for the standardized test procedure utilizes a single cantilever beam (SCB) specimen configuration. The objective of the current work is to develop a method for establishing SCB specimen dimensions. This is achieved by imposing specific limitations on specimen dimensions, with the objectives of promoting a linear elastic specimen response, and simplifying the data reduction method required for computing the critical strain energy release rate associated with debonding. The sizing method is also designed to be suitable for incorporation into a standardized test protocol. Preliminary application of the resulting sizing method yields practical specimen dimensions.
Effects of Nb Modification and Cooling Rate on the Microstructure in an Ultrahigh Carbon Steel
NASA Astrophysics Data System (ADS)
Hecht, Matthew D.; Webler, Bryan A.; Picard, Yoosuf N.
2018-04-01
In this study, two different melting methods were used to investigate effects of Nb modification on microstructure in ultrahigh carbon steel (UHCS). Nb-free and Nb-modified UHCS samples were produced by melting and resolidifying an industrially produced base UHCS with and without addition of Nb powder. Microstructure was characterized using scanning electron microscopy, X-ray diffraction, and electron dispersive spectroscopy. Equilibrium computations of phase fractions and compositions were utilized to help describe microstructural changes caused by the Nb additions. Nb combined with C to form NbC structures before and during austenite solidification, reducing the effective amount of carbon available for the other phases. Cementite network spacing in the Nb-free samples was controlled by the cooling rate during solidification (faster cooling led to a more refined network). Network spacing in the Nb-modified UHCS could be enlarged by NbC structures that formed cooperatively with austenite.
The effect of mechanical drawing on optical and structural properties of nylon 6 fibres
NASA Astrophysics Data System (ADS)
El-Bakary, M. A.
2007-09-01
The Pluta polarizing double-refracting interference microscope was attached to a mechanical drawing device to study the effect of cold drawing on the optical and structural properties of nylon 6 fibres. The microscope was used in its two positions for determining the refractive indices and birefringence of fibres. Different applied stresses and strain rates were obtained using the mechanical-drawing device. The effect of the applied stresses on the optical and physical parameters was investigated. The resulting optical parameters were utilized to investigate the polarizability per unit volume, the optical orientation factor, the orientation angle and the average work per chain. The refractive index and birefringence profiles were measured. Relationships between the average work per chain and optical parameters at different strains rates were determined. An empirical formula was deduced for these fibres. Micro-interferograms are given for illustration.
NASA Astrophysics Data System (ADS)
Dogra, Mridula; Singh, K. J.; Kaur, Kulwinder; Anand, Vikas; Kaur, Parminder; Singh, Prabhjot; Bajwa, B. S.
2018-03-01
In the present study, quaternary system of the composition (0.45 + x) Bi2O3-(0.25 - x) BaO-0.15 B2O3-0.15 Na2O (where 0 ≤ x ≤ 0.2 mol fraction) has been prepared by using melt-quenching technique for investigation of gamma ray shielding properties. Mass attenuation coefficients and half value layer parameters have been determined experimentally at 662 keV by using 137Cs source. It has been found that experimental results of these parameters hold good agreement with theoretical values. The density, molar volume, XRD, FTIR, Raman and UV-visible studies have been used to determine structural properties of the prepared glass samples. Dissolution rate of the samples has also been measured to check their utility as long term durable glasses.
Functional Dynamics within the Human Ribosome Regulate the Rate of Active Protein Synthesis.
Ferguson, Angelica; Wang, Leyi; Altman, Roger B; Terry, Daniel S; Juette, Manuel F; Burnett, Benjamin J; Alejo, Jose L; Dass, Randall A; Parks, Matthew M; Vincent, C Theresa; Blanchard, Scott C
2015-11-05
The regulation of protein synthesis contributes to gene expression in both normal physiology and disease, yet kinetic investigations of the human translation mechanism are currently lacking. Using single-molecule fluorescence imaging methods, we have quantified the nature and timing of structural processes in human ribosomes during single-turnover and processive translation reactions. These measurements reveal that functional complexes exhibit dynamic behaviors and thermodynamic stabilities distinct from those observed for bacterial systems. Structurally defined sub-states of pre- and post-translocation complexes were sensitive to specific inhibitors of the eukaryotic ribosome, demonstrating the utility of this platform to probe drug mechanism. The application of three-color single-molecule fluorescence resonance energy transfer (smFRET) methods further revealed a long-distance allosteric coupling between distal tRNA binding sites within ribosomes bearing three tRNAs, which contributed to the rate of processive translation. Copyright © 2015 Elsevier Inc. All rights reserved.
Functional dynamics within the human ribosome regulate the rate of active protein synthesis
Ferguson, Angelica; Wang, Leyi; Altman, Roger B.; Terry, Daniel S.; Juette, Manuel F.; Burnett, Benjamin J.; Alejo, Jose L.; Dass, Randall A.; Parks, Matthew M.; Vincent, Theresa C.; Blanchard, Scott C.
2015-01-01
SUMMARY The regulation of protein synthesis contributes to gene expression in both normal physiology and disease, yet kinetic investigations of the human translation mechanism are currently lacking. Using single-molecule fluorescence imaging methods, we have quantified the nature and timing of structural processes in human ribosomes during single-turnover and processive translation reactions. These measurements reveal that functional complexes exhibit dynamic behaviors and thermodynamic stabilities distinct from those observed for bacterial systems. Structurally defined sub-states of pre- and post-translocation complexes were sensitive to specific inhibitors of the eukaryotic ribosome demonstrating the utility of this platform to probe drug mechanism. The application of three-color single-molecule FRET methods further revealed a long-distance allosteric coupling between distal tRNA binding sites within ribosomes bearing three tRNAs, which contributed to the rate of processive translation. PMID:26593721
Effects of Nb Modification and Cooling Rate on the Microstructure in an Ultrahigh Carbon Steel
NASA Astrophysics Data System (ADS)
Hecht, Matthew D.; Webler, Bryan A.; Picard, Yoosuf N.
2018-06-01
In this study, two different melting methods were used to investigate effects of Nb modification on microstructure in ultrahigh carbon steel (UHCS). Nb-free and Nb-modified UHCS samples were produced by melting and resolidifying an industrially produced base UHCS with and without addition of Nb powder. Microstructure was characterized using scanning electron microscopy, X-ray diffraction, and electron dispersive spectroscopy. Equilibrium computations of phase fractions and compositions were utilized to help describe microstructural changes caused by the Nb additions. Nb combined with C to form NbC structures before and during austenite solidification, reducing the effective amount of carbon available for the other phases. Cementite network spacing in the Nb-free samples was controlled by the cooling rate during solidification (faster cooling led to a more refined network). Network spacing in the Nb-modified UHCS could be enlarged by NbC structures that formed cooperatively with austenite.
Propellant development for the Advanced Solid Rocket Motor
NASA Technical Reports Server (NTRS)
Landers, L. C.; Stanley, C. B.; Ricks, D. W.
1991-01-01
The properties of a propellant developed for the NASA Advanced Solid Rocket Motor (ASRM) are described in terms of its composition, performance, and compliance to NASA specifications. The class 1.3 HTPB/AP/A1 propellant employs an ester plasticizer and the content of ballistic solids is set at 88 percent. Ammonia evolution is prevented by the utilization of a neutral bonding agent which allows continuous mixing. The propellant also comprises a bimodal AP blend with one ground fraction, ground AP of at least 20 microns, and ferric oxide to control the burning rate. The propellant's characteristics are discussed in terms of tradeoffs in AP particle size and the types of Al powder, bonding agent, and HTPB polymer. The size and shape of the ballistic solids affect the processability, ballistic properties, and structural properties of the propellant. The revised baseline composition is based on maximizing the robustness of in-process viscosity, structural integrity, and burning-rate tailoring range.
Economic Analysis and Optimal Sizing for behind-the-meter Battery Storage
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wu, Di; Kintner-Meyer, Michael CW; Yang, Tao
This paper proposes methods to estimate the potential benefits and determine the optimal energy and power capacity for behind-the-meter BSS. In the proposed method, a linear programming is first formulated only using typical load profiles, energy/demand charge rates, and a set of battery parameters to determine the maximum saving in electric energy cost. The optimization formulation is then adapted to include battery cost as a function of its power and energy capacity in order to capture the trade-off between benefits and cost, and therefore to determine the most economic battery size. Using the proposed methods, economic analysis and optimal sizingmore » have been performed for a few commercial buildings and utility rate structures that are representative of those found in the various regions of the Continental United States. The key factors that affect the economic benefits and optimal size have been identified. The proposed methods and case study results cannot only help commercial and industrial customers or battery vendors to evaluate and size the storage system for behind-the-meter application, but can also assist utilities and policy makers to design electricity rate or subsidies to promote the development of energy storage.« less
Zhang, Bin; Xiao, Min; Wang, Shuanjin; Han, Dongmei; Song, Shuqin; Chen, Guohua; Meng, Yuezhong
2014-08-13
Novel hierarchically porous carbon materials with very high surface areas, large pore volumes and high electron conductivities were prepared from silk cocoon by carbonization with KOH activation. The prepared novel porous carbon-encapsulated sulfur composites were fabricated by a simple melting process and used as cathodes for lithium sulfur batteries. Because of the large surface area and hierarchically porous structure of the carbon material, soluble polysulfide intermediates can be trapped within the cathode and the volume expansion can be alleviated effectively. Moreover, the electron transport properties of the carbon materials can provide an electron conductive network and promote the utilization rate of sulfur in cathode. The prepared carbon-sulfur composite exhibited a high specific capacity and excellent cycle stability. The results show a high initial discharge capacity of 1443 mAh g(-1) and retain 804 mAh g(-1) after 80 discharge/charge cycles at a rate of 0.5 C. A Coulombic efficiency retained up to 92% after 80 cycles. The prepared hierarchically porous carbon materials were proven to be an effective host matrix for sulfur encapsulation to improve the sulfur utilization rate and restrain the dissolution of polysulfides into lithium-sulfur battery electrolytes.
Mental health, concurrent disorders, and health care utilization in homeless women.
Strehlau, Verena; Torchalla, Iris; Kathy, Li; Schuetz, Christian; Krausz, Michael
2012-09-01
This study assessed lifetime and current prevalence rates of mental disorders and concurrent mental and substance use disorders in a sample of homeless women. Current suicide risk and recent health service utilization were also examined in order to understand the complex mental health issues of this population and to inform the development of new treatment strategies that better meet their specific needs. A cross-sectional survey of 196 adult homeless women in three different Canadian cities was done. Participants were assessed using DSM-IV-based structured clinical interviews. Current diagnoses were compared to available mental health prevalence rates in the Canadian female general population. Current prevalence rates were 63% for any mental disorder, excluding substance use disorders; 17% for depressive episode; 10% for manic episode; 7% for psychotic disorder; 39% for anxiety disorders, 28% for posttraumatic stress disorder; and 19% for obsessive-compulsive disorder; 58% had concurrent substance dependence and mental disorders. Lifetime prevalence rates were notably higher. Current moderate or high suicide risk was found in 22% of the women. Participants used a variety of health services, especially emergency rooms, general practitioners, and walk-in clinics. Prevalence rates of mental disorders among homeless participants were substantially higher than among women from the general Canadian population. The percentage of participants with moderate or high suicide risk and concurrent disorders indicates a high severity of mental health symptomatology. Treatment and housing programs need to be accompanied by multidisciplinary, specialized interventions that account for high rates of complex mental health conditions.
Hoffmeister, Lorena; Lavados, Pablo M; Mar, Javier; Comas, Merce; Arrospide, Arantzazu; Castells, Xavier
2016-06-15
The only pharmacological treatment with proven cost-effectiveness in reducing acute ischemic stroke (AIS) associated disability is intravenous thrombolysis with recombinant tissue plasminogen activator but it's utilization rate is still low in most of the world. We estimated the minimum thrombolysis utilization rate needed to decrease the prevalence of stroke-related disability at a population level by using a discrete-event simulation model. The model included efficacy according to time to treatment up to 4.5h, and four scenarios for the utilization of intravenous thrombolysis in eligible patients with AIS: a) 2%; b) 12% c) 25% and d) 40%. We calculated the prevalence of AIS related disability in each scenario, using population based data. The simulation was performed from 2002 to 2017 using the ARENA software. A 2% utilization rate yielded a prevalence of disability of 359.1 per 100,000. Increasing thrombolysis to 12% avoided 779 disabled patients. If the utilization rate was increased to 25%, 1783 disabled patients would be avoided. The maximum scenario of 40% decreased disability to 335.7 per 100,000, avoiding 17% of AIS-related disability. The current utilization rate of intravenous thrombolysis of 2% has minimal population impact. Increasing the rate of utilization to more than 12% is the minimum to have a significant population effect on disability and should be a public policy aim. Copyright © 2016 Elsevier B.V. All rights reserved.
A new approach for vibration control in large space structures
NASA Technical Reports Server (NTRS)
Kumar, K.; Cochran, J. E., Jr.
1987-01-01
An approach for augmenting vibration damping characteristics in space structures with large panels is presented. It is based on generation of bending moments rather than forces. The moments are generated using bimetallic strips, suitably mounted at selected stations on both sides of the large panels, under the influence of differential solar heating, giving rise to thermal gradients and stresses. The collocated angular velocity sensors are utilized in conjunction with mini-servos to regulate the control moments by flipping the bimetallic strips. A simple computation of the rate of dissipation of vibrational energy is undertaken to assess the effectiveness of the proposed approach.
Lee, Hyo Jung; Jang, Sung-In; Park, Eun-Cheol
2017-02-20
The Korean healthcare system is composed of costly and inefficient structures that fail to adequately divide the functions and roles of medical care organizations. To resolve this matter, the government reformed the cost-sharing policy in November of 2011 for the management of outpatients visiting general or tertiary hospitals with comparatively mild diseases. The purpose of the present study was to examine the impact of increasing the coinsurance rate of prescription drug costs for 52 mild diseases at general or tertiary hospitals on outpatient healthcare service utilization. The present study used health insurance claim data collected from 2010 to 2013. The study population consisted of 505,691 outpatients and was defined as those aged 20-64 years who had visited medical care organizations for the treatment of 52 diseases both before and after the program began. To examine the effect of the cost-sharing policy on outpatient healthcare service utilization (percentage of general or tertiary hospital utilization, number of outpatient visits, and outpatient medical costs), a segmented regression analysis was performed. After the policy to increase the coinsurance rate on prescription drug costs was implemented, the number of outpatient visits at general or tertiary hospitals decreased (β = -0.0114, p < 0.0001); however, the number increased at hospitals and clinics (β = 0.0580, p < 0.0001). Eventually, the number of outpatient visits to hospitals and clinics began to decrease after policy initiation (β = -0.0018, p < 0.0001). Outpatient medical costs decreased for both medical care organizations (general or tertiary hospitals: β = -2913.4, P < 0.0001; hospitals or clinics: β = -591.35, p < 0.0001), and this decreasing trend continued with time. It is not clear that decreased utilization of general or tertiary hospitals has transferred to that of clinics or hospitals due to the increased cost-sharing policy of prescription drug costs. This result indicates the cost-sharing policy, intended to change patient behaviors for healthcare service utilization, has had limited effects on rebuilding the healthcare system and the function of medical care organizations.
A GPU-based mipmapping method for water surface visualization
NASA Astrophysics Data System (ADS)
Li, Hua; Quan, Wei; Xu, Chao; Wu, Yan
2018-03-01
Visualization of water surface is a hot topic in computer graphics. In this paper, we presented a fast method to generate wide range of water surface with good image quality both near and far from the viewpoint. This method utilized uniform mesh and Fractal Perlin noise to model water surface. Mipmapping technology was enforced to the surface textures, which adjust the resolution with respect to the distance from the viewpoint and reduce the computing cost. Lighting effect was computed based on shadow mapping technology, Snell's law and Fresnel term. The render pipeline utilizes a CPU-GPU shared memory structure, which improves the rendering efficiency. Experiment results show that our approach visualizes water surface with good image quality at real-time frame rates performance.
Campbell, Belinda A; Ball, David; Mornex, Françoise
2015-02-01
Clinical guidelines widely recognize the importance of multidisciplinary meetings (MDM) in the optimal care of lung cancer patients. The published literature suggest that dedicated Lung Cancer MDM lead to increased treatment utilization rates and improved survival outcomes for patients with lung cancer. For radiation oncologists, Lung Cancer MDM have been proven to support evidence-based practice and improve the utilization of radiotherapy. Lung Cancer MDM also allow for education and promotion of specialty radiotherapy services. The fast pace of modern medicine is also presenting new challenges for the multidisciplinary lung cancer team, and technological advances are likely to lead to new changes in the structure of traditional Lung Cancer MDM. © 2015 Asian Pacific Society of Respirology.
Photovoltaic-system evaluation at the Northeast Residential Experiment Station
NASA Astrophysics Data System (ADS)
Russell, M. C.
1983-01-01
Five residential photovoltaic systems were tested and the systems' performance and cost was evaluated. The five systems each consist of an unoccupied structure employing a roof mounted photovoltaic array and a utility connected power inverter capable of sending excess PV generated energy to the local utility system. The photovoltaic systems are designed to meet at least 50% of the total annual electrical demand of residences in the cold climate regions of the country. The following specific issues were investigated: photovoltaic array and inverter system power rating and performance characterization, system energy production, reliability and system cost/worth. Summary load data from five houses in the vicinity of the Northeast Residential Experiment Station, and meteorological data from the station's weather station are also presented.
Lai, Hsien-Tang; Kung, Pei-Tseng; Tsai, Wen-Chen
2014-12-01
Women with intellectual disabilities (ID) have cognitive impairment and communication difficulties; for both caregivers and clinical personnel, discovering the early symptoms of breast cancer among women with ID is challenging. The mammography utilization rate of women with ID was significantly lower than that of women in the general population. This study employed a 2008 database of people with disabilities in Taiwan as a research target and analyzed the mammography utilization rate of women with ID aged 50–69 years. In addition, relevant factors influencing mammography utilization among women with ID were also investigated. A total of 4370 participants were recruited and the majority were illiterate or had elementary-level educations (82.27%). The majority of the participants had ID that was more severe than mild (83.80%). The mammography utilization rate of women with ID was 4.32%, which was significantly lower than that of women in the general population (12%). The mammography utilization rate among women with ID who were married, had higher education levels, and had been diagnosed with cancer, diabetes, or mild ID was significantly higher. However, the mammography utilization rate among women with ID, who had elementary-level educations or were illiterate, was only 4.03%. The utilization rate among women with profound ID was only 2.65%. Women with ID who had undergone pap smears or had utilized adult preventive health services demonstrated a significantly higher mammography utilization rate. This study identified that education level, a diagnosis of diabetes, and the application of pap smears or adult preventive health services were primary factors that influenced the mammography utilization rate among women with ID. This study also observed that in Taiwan, the mammography utilization rate of women with ID was lower than that of pap smears and adult preventive health services, and was only half of that of people with disabilities. An unequal situation existed in regard to the acceptance of breast cancer screening among women with ID, and a different form of strategic planning must be adopted in public health policy. Because ID differs from other disabilities and most women with ID are illiterate, tailored courses are required to train primary caregivers and clinical personnel in providing knowledge and services. The objectives are to diagnose breast cancer at an early stage to decrease the risk of mortality and ensure their rights to health.
Prisman, Eitan; Daly, Michael J; Chan, Harley; Siewerdsen, Jeffrey H; Vescan, Allan; Irish, Jonathan C
2011-01-01
Custom software was developed to integrate intraoperative cone-beam computed tomography (CBCT) images with endoscopic video for surgical navigation and guidance. A cadaveric head was used to assess the accuracy and potential clinical utility of the following functionality: (1) real-time tracking of the endoscope in intraoperative 3-dimensional (3D) CBCT; (2) projecting an orthogonal reconstructed CBCT image, at or beyond the endoscope, which is parallel to the tip of the endoscope corresponding to the surgical plane; (3) virtual reality fusion of endoscopic video and 3D CBCT surface rendering; and (4) overlay of preoperatively defined contours of anatomical structures of interest. Anatomical landmarks were contoured in CBCT of a cadaveric head. An experienced endoscopic surgeon was oriented to the software and asked to rate the utility of the navigation software in carrying out predefined surgical tasks. Utility was evaluated using a rating scale for: (1) safely completing the task; and (2) potential for surgical training. Surgical tasks included: (1) uncinectomy; (2) ethmoidectomy; (3) sphenoidectomy/pituitary resection; and (4) clival resection. CBCT images were updated following each ablative task. As a teaching tool, the software was evaluated as "very useful" for all surgical tasks. Regarding safety and task completion, the software was evaluated as "no advantage" for task (1), "minimal" for task (2), and "very useful" for tasks (3) and (4). Landmark identification for structures behind bone was "very useful" for both categories. The software increased surgical confidence in safely completing challenging ablative tasks by presenting real-time image guidance for highly complex ablative procedures. In addition, such technology offers a valuable teaching aid to surgeons in training. Copyright © 2011 American Rhinologic Society-American Academy of Otolaryngic Allergy, LLC.
NASA Astrophysics Data System (ADS)
Hu, Haibin; Zhang, Yanjiao; Mai, Kangsen; Ai, Qinghui; Xu, Wei; Zhang, Wenbing; Li, Yanxian; Liu, Jintao
2015-10-01
A 12-week feeding trial was conducted to evaluate the effects of dietary stachyose on the growth performance, digestive enzymes activities and intestinal structures of juvenile turbot ( Scophthalmus maximus L). Five isonitrogenous (49.58% crude protein) and isolipidic (10.50% crude lipid) diets were formulated to contain 0 (Control), 0.625% (S-0.625), 1.25% (S-1.25), 2.5% (S-2.5) and 5% (S-5) stachyose, respectively. With the increase of stachyose level, the growth performance and feed utilization of turbot, such as the specific growth rate, final mean body weight, weight gain rate and feed efficiency, increased significantly ( P< 0.05) and then stabilized. The feed intake of fish fed S-5 was significantly higher ( P< 0.05) than that of fish in other groups. The activities of trypsin, intestinal caseinolytic, stomach and intestinal amylase were significantly influenced by stachyose ( P<0.05). The highest values of trypsin and intestinal caseinolytic activities were observed in group S-1.25, while the highest activity of stomach amylase and the lowest activity of intestine amylase were observed in group S-5. No lesion or damage was found on the distal intestine structures of fish from all treatments, while the height of simple folds in the distal intestine was significantly increased ( P< 0.05) when 1.25% or 2.5% stachyose was added in the diets. These results indicated that moderate level of stachyose (1.25%) improves the growth performance, feed utilization, digestive enzyme activities and the distal intestine structures of juvenile turbot.
NASA Astrophysics Data System (ADS)
Mataya, M. C.; Carr, M. J.; Krauss, G.
1984-02-01
The development of microstructure and strength during forging in a γ' strengthened austenitic stainless steel, JBK-75, was investigated by means of forward extrusion of cylindrical specimens. The specimens were deformed in a strain range of 0.16 to 1.0, from 800°C to 1080°C, and at approximate strain rates of 2 (press forging) and 2 × 103 s-1 (high energy rate forging), and structures examined by light and transmission microscopy. Mechanical properties were determined by tensile testing as-forged and forged and aged specimens. The alloy exhibited an extremely wide variety of structures and properties within the range of forging pzrameters studied. Deformation at the higher strain rate via high energy rate forging resulted in unrecovered substructures and high strengths at low forging temperatures, and static recrystallization and low strengths at high temperatures. In contrast, however, deformation at the lower strain rate via press forging resulted in retention of the well developed subgrain structure and associated high strength produced at high forging temperatures and strains. At lower temperatures and strains during press forging a subgrain structure formed preferentially at high angle grain boundaries, apparently by a creep-type deformation mechanism. Dynamic recrystallization was not an important restoration mechanism for any of the forging conditions. The results are interpreted on the basis of stacking fault energy and the accumulation of strain energy during hot working. The significance of observed microstructural differences for equivalent deformation conditions (iso-Z, where Z is the Zener-Holloman parameter) is discussed in relation to the utilization of Z for predicting hot work structures and strengths. Aging showed that the γ' precipitation process is not affected by substructure and that the strengthening contributions, from substructure and precipitation, were independent and additive. Applications for these findings are discussed in terms of process design criteria.
Morphology and Structural Characterization of Carbon Nanowalls Grown via VHF-PECVD
NASA Astrophysics Data System (ADS)
Akmal Hasanudin, M.; Wahab, Y.; Ismail, A. K.; Zahid Jamal, Z. A.
2018-03-01
A 150 MHz very high frequency plasma enhanced chemical vapor deposition (150 MHz VHF-PECVD) system was utilized to fabricate two-dimensional carbon nanostructure from the mixture of methane and hydrogen. Morphology and structural properties of the grown nanostructure were investigated by FESEM imaging and Raman spectroscopy. Carbon nanowalls (CNW) with dense and wavy-like structure were successfully synthesized. The wavy-like morphology of CNW was found to be more distinct during growth at small electrode spacing and denser with increasing deposition time due to better flux of hydrocarbon radicals to the substrate and higher rate of reaction, respectively. Typical characteristics of CNW were observed from strong D band, narrow bandwidth of G band and single broad peak of 2D band of Raman spectra indicating the presence of disordered nanocrystalline graphite structure with high degree of graphitization.
Structured functional additive regression in reproducing kernel Hilbert spaces
Zhu, Hongxiao; Yao, Fang; Zhang, Hao Helen
2013-01-01
Summary Functional additive models (FAMs) provide a flexible yet simple framework for regressions involving functional predictors. The utilization of data-driven basis in an additive rather than linear structure naturally extends the classical functional linear model. However, the critical issue of selecting nonlinear additive components has been less studied. In this work, we propose a new regularization framework for the structure estimation in the context of Reproducing Kernel Hilbert Spaces. The proposed approach takes advantage of the functional principal components which greatly facilitates the implementation and the theoretical analysis. The selection and estimation are achieved by penalized least squares using a penalty which encourages the sparse structure of the additive components. Theoretical properties such as the rate of convergence are investigated. The empirical performance is demonstrated through simulation studies and a real data application. PMID:25013362
NASA Astrophysics Data System (ADS)
Jung, Yugyung; Hyun, Ji-chul; Choi, Jongchan; Atajanov, Arslan; Yang, Sung
2017-12-01
Controlling cells' movement is an important technique in biological analysis that is performed within a microfluidic system. Many external forces are utilized for manipulation of cells, including their position in the channel. These forces can effectively control cells in a desired manner. Most of techniques used to manipulate cells require sophisticated set-ups and equipment to generate desired effect. The exception to this is the use of hydrodynamic force. In this study, a series of continuously varying herringbone structures is proposed for positioning cells in a microfluidic channel using hydrodynamic force. This structure was experimentally developed by changing parameters, such as the length of the herringbone's apex, the length of the herringbone's base and the ratio of the height of the flat channel to the height of the herringbone structure. Results of this study, have demonstrated that the length of the herringbone's apex and the ratio of the heights of the flat channel and the herringbone structure were crucial parameters influencing positioning of cells at 100 μl/h flow rate. The final design was fixed at 170 and 80 μm for the length of herringbone's apex and the length of herringbone's base, respectively. The average position of cells in this device was 34 μm away from the side wall in a 200 μm wide channel. Finally, to substantiate a practical application of the herringbone structure for positioning, cells were randomly introduced into a microfluidic device, containing an array of trapping structures together with a series of herringbone structures along the channel. The cells were moved toward the trapping structure by the herringbone structure and the trapping efficiency was increased. Therefore, it is anticipated that this device will be utilized to continuously control cells' position without application of external forces.
NASA Astrophysics Data System (ADS)
Meacham, James R.; Jabbari, Faryar; Brouwer, Jacob; Mauzey, Josh L.; Samuelsen, G. Scott
Current high temperature fuel cell (HTFC) systems used for stationary power applications (in the 200-300 kW size range) have very limited dynamic load following capability or are simply base load devices. Considering the economics of existing electric utility rate structures, there is little incentive to increase HTFC ramping capability beyond 1 kWs -1 (0.4% s -1). However, in order to ease concerns about grid instabilities from utility companies and increase market adoption, HTFC systems will have to increase their ramping abilities, and will likely have to incorporate electrical energy storage (EES). Because batteries have low power densities and limited lifetimes in highly cyclic applications, ultra capacitors may be the EES medium of choice. The current analyses show that, because ultra capacitors have a very low energy storage density, their integration with HTFC systems may not be feasible unless the fuel cell has a ramp rate approaching 10 kWs -1 (4% s -1) when using a worst-case design analysis. This requirement for fast dynamic load response characteristics can be reduced to 1 kWs -1 by utilizing high resolution demand data to properly size ultra capacitor systems and through demand management techniques that reduce load volatility.
Engineer, Rakesh S; Podolsky, Seth R; Fertel, Baruch S; Grover, Purva; Jimenez, Heather; Simon, Erin L; Smalley, Courtney M
2018-05-15
The American College of Emergency Physicians embarked on the "Choosing Wisely" campaign to avoid computed tomographic (CT) scans in patients with minor head injury who are at low risk based on validated decision rules. We hypothesized that a Pediatric Mild Head Injury Care Path could be developed and implemented to reduce inappropriate CT utilization with support of a clinical decision support tool (CDST) and a structured parent discussion tool. A quality improvement project was initiated for 9 weeks to reduce inappropriate CT utilization through 5 interventions: (1) engagement of leadership, (2) provider education, (3) incorporation of a parent discussion tool to guide discussion during the emergency department (ED) visit between the parent and the provider, (4) CDST embedded in the electronic medical record, and (5) importation of data into the note to drive compliance. Patients prospectively were enrolled when providers at a pediatric and a freestanding ED entered data into the CDST for decision making. Rate of care path utilization and head CT reduction was determined for all patients with minor head injury based on International Classification of Diseases, Ninth Revision codes. Targets for care path utilization and head CT reduction were established a priori. Results were compared with baseline data collected from 2013. The CDST was used in 176 (77.5%) of 227 eligible patients. Twelve patients were excluded based on a priori criteria. Adherence to recommendations occurred in 162 (99%) of 164 patients. Head CT utilization was reduced from 62.7% to 22% (odds ratio, 0.17; 95% confidence interval, 0.12-0.24) where CDST was used by the provider. There were no missed traumatic brain injuries in our study group. A Pediatric Mild Head Injury Care Path can be implemented in a pediatric and freestanding ED, resulting in reduced head CT utilization and high levels of adherence to CDST recommendations.
NASA Astrophysics Data System (ADS)
Zhang, Yao; Zhang, Wansen; Shen, Shuiyun; Yan, Xiaohui; Wu, Aiming; Yin, Jiewei; Zhang, Junliang
2018-03-01
Although lithium-rich layered composite cathode materials can meet the requirements of high discharge capacities and energy densities of lithium-ion batteries (LIBs), the drawbacks of encountering structural reconstruction, sharp voltage decay during cycling as well as low packing density still exist, which retard their further commercial development. This paper presents a novel approach to construct hollow porous bowl-shaped Li1.2Mn0.54Ni0.13Co0.13O2 (denoted as HPB-LMNCO) particles, which involves bowl-shaped carbonaceous particles as the predominant template and polyvinylpyrrolidone as an assistant soft template. One crucial step during the synthetic process is the controlled growth of metal ions with specific molar ratios in the bowl-shaped carbonaceous particles, and the key control parameter is the heating rate to ensure the prepared particles own the desired hollow porous bowl-shaped morphology. Of particular note is the desirable architecture which not only inherits the merits of hollow structures but also facilitates the tight particles packing. Owing to these advantages, utilizing this HPB-LMNCO as a cathode material manifests impressive rate capability and exceptional cycling stability at high rates with capacity retention of above 82% over 100 cycles. These results reveal that structural design of cathode materials play a pivotal role in developing high-performance LIBs.
O'Malley, Jean P.; Rosetti, Maureen O'Keeffe; Lowe, Robert A.; Angier, Heather; Gold, Rachel; Marino, Miguel; Hatch, Brigit; Hoopes, Megan; Bailey, Steffani R.; Heintzman, John; Gallia, Charles; DeVoe, Jennifer E.
2016-01-01
Background Although past research demonstrated that Medicaid expansions were associated with increased emergency department (ED) and primary care (PC) utilization, little is known about how long this increased utilization persists or whether post-coverage utilization is affected by prior insurance status. Objectives (1) To assess changes in ED, PC, mental and behavioral health care (MBHC), and specialty care visit rates among individuals gaining Medicaid over 24 months post-insurance gain; (2) To evaluate the association of previous insurance with utilization. Methods Using claims data, we conducted a retrospective cohort analysis of adults insured for 24 months following Oregon's 2008 Medicaid expansion. Utilization rates among 1,124 new and 1,587 returning enrollees were compared to those among 5,126 enrollees with continuous Medicaid coverage (≥1 year pre-expansion). Visit rates were adjusted for propensity score classes and geographic region. Results PC visit rates in both newly and returning insured individuals significantly exceeded those in the continuously insured in months four through 12, but were not significantly elevated in the second year. In contrast, ED utilization rates were significantly higher in returning insured compared to newly or continuously insured individuals and remained elevated over time. New visits to PC and specialist care were higher among those who gained Medicaid compared to the continuously insured throughout the study period. Conclusions Predicting the effect of insurance expansion on healthcare utilization should account for the prior coverage history of new enrollees. Additionally, utilization of outpatient services changes with time after insurance, so expansion evaluations should allow for rate stabilization. PMID:27547943
Reconstruction of biofilm images: combining local and global structural parameters
DOE Office of Scientific and Technical Information (OSTI.GOV)
Resat, Haluk; Renslow, Ryan S.; Beyenal, Haluk
2014-10-20
Digitized images can be used for quantitative comparison of biofilms grown under different conditions. Using biofilm image reconstruction, it was previously found that biofilms with a completely different look can have nearly identical structural parameters and that the most commonly utilized global structural parameters were not sufficient to uniquely define these biofilms. Here, additional local and global parameters are introduced to show that these parameters considerably increase the reliability of the image reconstruction process. Assessment using human evaluators indicated that the correct identification rate of the reconstructed images increased from 50% to 72% with the introduction of the new parametersmore » into the reconstruction procedure. An expanded set of parameters especially improved the identification of biofilm structures with internal orientational features and of structures in which colony sizes and spatial locations varied. Hence, the newly introduced structural parameter sets helped to better classify the biofilms by incorporating finer local structural details into the reconstruction process.« less
Kim, Hanjoong; Chung, Woo Jin; Song, Young Jong; Kang, Dae Ryong; Yi, Jee Jeon; Nam, Chung Mo
2003-01-01
To examine and quantify the impact of the recent economic crisis on morbidity and medical care utilization in the Republic of Korea. 22 675 people from 6791 households and 43 682 people from 12 283 households were questioned for two nationwide surveys that took place in 1995 and 1998, respectively. A separate sample pretest-posttest design was used and we conducted c2 test and logistic regression analysis after controlling for the maturation effect of the morbidity and medical care utilization. The morbidity rates of chronic disease and acute disease increased significantly by 27.1% and 9.5%, respectively, whereas the utilization rates of outpatient and inpatient services decreased by 15.1% and 5.2%, respectively. In particular, the pace of decline in the utilization rate of outpatient services varied depending on the type of disease: morbidity rates for mental and behavioural disorders were 13.7%; for cardiovascular disease, 7.1%; and for injury, 31.6%. After the Republic of Korean economic crisis, the morbidity and medical care utilization rates changed significantly but the degree of change depended on the type of disease or service. The time-dependent relationship between the national economy and the morbidity and medical care utilization rates needs to be further investigated.
Zhang, Ning; Chen, Chen; Mei, Zongwei; Liu, Xiaohe; Qu, Xiaolei; Li, Yunxiang; Li, Siqi; Qi, Weihong; Zhang, Yuanjian; Ye, Jinhua; Roy, Vellaisamy A L; Ma, Renzhi
2016-04-27
Exploring surface-exposed highly active crystal facets for photocatalytic oxidations is promising in utilizing monoclinic WO3 semiconductor. However, the previously reported highly active facets for monoclinic WO3 were mainly toward enhancing photocatalytic reductions. Here we report that the WO3 with {100} facet orientation and tuned surface electronic band structure can effectively enhance photocatalytic oxidation properties. The {100} faceted WO3 single crystals are synthesized via a facile hydrothermal method. The UV-visible diffuse reflectance, X-ray photoelectron spectroscopy valence band spectra, and photoelectrochemical measurements suggest that the {100} faceted WO3 has a much higher energy level of valence band maximum compared with the normal WO3 crystals without preferred orientation of the crystal face. The density functional theory calculations reveal that the shift of O 2p and W 5d states in {100} face induce a unique band structure. In comparison with the normal WO3, the {100} faceted WO3 exhibits an O2 evolution rate about 5.1 times in water splitting, and also shows an acetone evolution rate of 4.2 times as well as CO2 evolution rate of 3.8 times in gaseous degradation of 2-propanol. This study demonstrates an efficient crystal face engineering route to tune the surface electronic band structure for enhanced photocatalytic oxidations.
Gabriel, Phabinly; McManus, Margaret; Rogers, Katherine; White, Patience
2017-09-01
To identify statistically significant positive outcomes in pediatric-to-adult transition studies using the triple aim framework of population health, consumer experience, and utilization and costs of care. Studies published between January 1995 and April 2016 were identified using the CINAHL, Ovid MEDLINE, PubMed, Scopus, and Web of Science databases. Included studies evaluated pre-evaluation and postevaluation data, intervention and comparison groups, and randomized clinic trials. The methodological strength of each study was assessed using the Effective Public Health Practice Project Quality Assessment Tool. Out of a total of 3844 articles, 43 met our inclusion criteria. Statistically significant positive outcomes were found in 28 studies, most often related to population health (20 studies), followed by consumer experience (8 studies), and service utilization (9 studies). Among studies with moderate to strong quality assessment ratings, the most common positive outcomes were adherence to care and utilization of ambulatory care in adult settings. Structured transition interventions often resulted in positive outcomes. Future evaluations should consider aligning with professional transition guidance; incorporating detailed intervention descriptions about transition planning, transfer, and integration into adult care; and measuring the triple aims of population health, experience, and costs of care. Copyright © 2017 Elsevier Inc. All rights reserved.
Coping with thermal challenges: physiological adaptations to environmental temperatures.
Tattersall, Glenn J; Sinclair, Brent J; Withers, Philip C; Fields, Peter A; Seebacher, Frank; Cooper, Christine E; Maloney, Shane K
2012-07-01
Temperature profoundly influences physiological responses in animals, primarily due to the effects on biochemical reaction rates. Since physiological responses are often exemplified by their rate dependency (e.g., rate of blood flow, rate of metabolism, rate of heat production, and rate of ion pumping), the study of temperature adaptations has a long history in comparative and evolutionary physiology. Animals may either defend a fairly constant temperature by recruiting biochemical mechanisms of heat production and utilizing physiological responses geared toward modifying heat loss and heat gain from the environment, or utilize biochemical modifications to allow for physiological adjustments to temperature. Biochemical adaptations to temperature involve alterations in protein structure that compromise the effects of increased temperatures on improving catalytic enzyme function with the detrimental influences of higher temperature on protein stability. Temperature has acted to shape the responses of animal proteins in manners that generally preserve turnover rates at animals' normal, or optimal, body temperatures. Physiological responses to cold and warmth differ depending on whether animals maintain elevated body temperatures (endothermic) or exhibit minimal internal heat production (ectothermic). In both cases, however, these mechanisms involve regulated neural and hormonal over heat flow to the body or heat flow within the body. Examples of biochemical responses to temperature in endotherms involve metabolic uncoupling mechanisms that decrease metabolic efficiency with the outcome of producing heat, whereas ectothermic adaptations to temperature are best exemplified by the numerous mechanisms that allow for the tolerance or avoidance of ice crystal formation at temperatures below 0°C. 2012 American Physiological Society. Compr Physiol 2:2037-2061, 2012.
Economically dispatching cogeneration facilities
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hernandez, E.
Economic dispatching has been used by utilities to meet the energy demands of their customers for decades. The objective was to first load those units which cost the least to run and slowly increase the loading of more expensive units as the incremental energy price increased. Although this concept worked well for utility based systems where incremental costs rose with peak demand, the independent power producers(IPPs) and the power purchase agreements (PPAs) have drastically changed this notion. Most PPAs structured for the IPP environment have negotiated rates which remain the same during peak periods and base their electrical generation onmore » specific process steam requirements. They also must maintain the required production balance of process steam and electrical load in order to qualify as a Public Utility Regulatory Policies Act (PURPA) facility. Consequently, economically dispatching Cogeneration facilities becomes an exercise in adhering to contractual guidelines while operating the equipment in the most efficient manner possible for the given condition. How then is it possible to dispatch a Cogeneration facility that maintains the electrical load demand of JFK Airport while satisfying all of its heating and cooling needs? Contractually, Kennedy International Airport Cogen (KIAC) has specific obligations concerning electrical and thermal energy exported to JFK Airport. The facility`s impressive array of heating and cooling apparatuses together with the newly installed cogen fulfilled the airport`s needs by utilizing an endless combination of new and previously installed equipment. Moreover, in order to economically operate the plant a well structured operating curriculum was necessary.« less
Wunderlich, Adam; Abbey, Craig K
2013-11-01
Studies of lesion detectability are often carried out to evaluate medical imaging technology. For such studies, several approaches have been proposed to measure observer performance, such as the receiver operating characteristic (ROC), the localization ROC (LROC), the free-response ROC (FROC), the alternative free-response ROC (AFROC), and the exponentially transformed FROC (EFROC) paradigms. Therefore, an experimenter seeking to carry out such a study is confronted with an array of choices. Traditionally, arguments for different approaches have been made on the basis of practical considerations (statistical power, etc.) or the gross level of analysis (case-level or lesion-level). This article contends that a careful consideration of utility should form the rationale for matching the assessment paradigm to the clinical task of interest. In utility theory, task performance is commonly evaluated with total expected utility, which integrates the various event utilities against the probability of each event. To formalize the relationship between expected utility and the summary curve associated with each assessment paradigm, the concept of a "natural" utility structure is proposed. A natural utility structure is defined for a summary curve when the variables associated with the summary curve axes are sufficient for computing total expected utility, assuming that the disease prevalence is known. Natural utility structures for ROC, LROC, FROC, AFROC, and EFROC curves are introduced, clarifying how the utilities of correct and incorrect decisions are aggregated by summary curves. Further, conditions are given under which general utility structures for localization-based methodologies reduce to case-based assessment. Overall, the findings reveal how summary curves correspond to natural utility structures of diagnostic tasks, suggesting utility as a motivating principle for choosing an assessment paradigm.
2012-01-01
Background Type 2 Diabetes Mellitus (DM) is a common chronic disease associated with multiple clinical complications. Management guidelines have been established which recommend a risk-stratified approach to managing these patients in primary care. This study aims to evaluate the quality of care (QOC) and effectiveness of a multi-disciplinary risk assessment and management programme (RAMP) for type 2 diabetic patients attending government-funded primary care clinics in Hong Kong. The evaluation will be conducted using a structured and comprehensive evidence-based evaluation framework. Method/design For evaluation of the quality of care, a longitudinal study will be conducted using the Action Learning and Audit Spiral methodologies to measure whether the pre-set target standards for criteria related to the structure and process of care are achieved. Each participating clinic will be invited to complete a Structure of Care Questionnaire evaluating pre-defined indicators which reflect the setting in which care is delivered, while process of care will be evaluated against the pre-defined indicators in the evaluation framework. Effectiveness of the programme will be evaluated in terms of clinical outcomes, service utilization outcomes, and patient-reported outcomes. A cohort study will be conducted on all eligible diabetic patients who have enrolled into RAMP for more than one year to compare their clinical and public service utilization outcomes of RAMP participants and non-participants. Clinical outcome measures will include HbA1c, blood pressure (both systolic and diastolic), lipids (low-density lipoprotein cholesterol) and future cardiovascular diseases risk prediction; and public health service utilization rate will include general and specialist outpatient, emergency department attendances, and hospital admissions annually within 5 years. For patient-reported outcomes, a total of 550 participants and another 550 non-participants will be followed by telephone to monitor quality of life, patient enablement, global rating of change in health and private health service utilization at baseline, 6, 12, 36 and 60 months. Discussion The quality of care and effectiveness of the RAMP in enhancing the health for patients with type 2 diabetes will be determined. Possible areas for quality enhancement will be identified and standards of good practice can be established. The information will be useful in guiding service planning and policy decision making. PMID:23216708
Fung, Colman S C; Chin, Weng Yee; Dai, Daisy S K; Kwok, Ruby L P; Tsui, Eva L H; Wan, Yuk Fai; Wong, Wendy; Wong, Carlos K H; Fong, Daniel Y T; Lam, Cindy L K
2012-12-05
Type 2 Diabetes Mellitus (DM) is a common chronic disease associated with multiple clinical complications. Management guidelines have been established which recommend a risk-stratified approach to managing these patients in primary care. This study aims to evaluate the quality of care (QOC) and effectiveness of a multi-disciplinary risk assessment and management programme (RAMP) for type 2 diabetic patients attending government-funded primary care clinics in Hong Kong. The evaluation will be conducted using a structured and comprehensive evidence-based evaluation framework. For evaluation of the quality of care, a longitudinal study will be conducted using the Action Learning and Audit Spiral methodologies to measure whether the pre-set target standards for criteria related to the structure and process of care are achieved. Each participating clinic will be invited to complete a Structure of Care Questionnaire evaluating pre-defined indicators which reflect the setting in which care is delivered, while process of care will be evaluated against the pre-defined indicators in the evaluation framework.Effectiveness of the programme will be evaluated in terms of clinical outcomes, service utilization outcomes, and patient-reported outcomes. A cohort study will be conducted on all eligible diabetic patients who have enrolled into RAMP for more than one year to compare their clinical and public service utilization outcomes of RAMP participants and non-participants. Clinical outcome measures will include HbA1c, blood pressure (both systolic and diastolic), lipids (low-density lipoprotein cholesterol) and future cardiovascular diseases risk prediction; and public health service utilization rate will include general and specialist outpatient, emergency department attendances, and hospital admissions annually within 5 years. For patient-reported outcomes, a total of 550 participants and another 550 non-participants will be followed by telephone to monitor quality of life, patient enablement, global rating of change in health and private health service utilization at baseline, 6, 12, 36 and 60 months. The quality of care and effectiveness of the RAMP in enhancing the health for patients with type 2 diabetes will be determined. Possible areas for quality enhancement will be identified and standards of good practice can be established. The information will be useful in guiding service planning and policy decision making.
2013-01-01
material models to describe the behavior of fibers and structures under high -rate loading conditions. With the utility of the CAE methods and tools largely...phenylene terephthalamide (PPTA), available commercially as Kevlar, Twaron, Technora, and so forth, are characterized by high specific axial stiffness...and high specific tensile strength. These fibers are often referred to as “ballistic fibers” since they are commonly used in different ballistic- and
NASA Astrophysics Data System (ADS)
Mukisa, Ivan M.; Muyanja, Charles M. B. K.; Byaruhanga, Yusuf B.; Schüller, Reidar B.; Langsrud, Thor; Narvhus, Judith A.
2012-03-01
Malted and un-malted sorghum ( Sorghum bicolor (L.) Moench) flour was gamma irradiated with a dose of 10 kGy and then re-irradiated with 25 kGy. The effects of irradiation on microbial decontamination, amylase activity, fermentability (using an amylolytic L. plantarum MNC 21 strain), starch granule structure and viscosity were determined. Standard methods were used during determinations. The 10 kGy dose had no effect on microbial load of un-malted flour but reduced that of malted flour by 3 log cycles. Re-irradiation resulted in complete decontamination. Irradiation of malt caused a significant ( p<0.05) reduction in alpha and beta amylase activity (22% and 32%, respectively). Irradiation of un-malted flour increased the rates of utilization of glucose and maltose by 53% and 100%, respectively, during fermentation. However, microbial growth, rate of lactic acid production, final lactic acid concentration and pH were not affected. Starch granules appeared normal externally even after re-irradiation, however, granules ruptured and dissolved easily after hydration and gelatinization. Production of high dry matter density porridge (200 g dry matter/L) with a viscosity of 3500 cP was achieved by irradiation of un-malted flout at 10 kGy. Gamma irradiation can be used to decontaminate flours and could be utilized to produce weaning porridge from sorghum.
NASA Astrophysics Data System (ADS)
Cao, Jianyun; Li, Xiaohong; Wang, Yaming; Walsh, Frank C.; Ouyang, Jia-Hu; Jia, Dechang; Zhou, Yu
2015-10-01
MnO2 is a promising electrode material for high energy supercapacitors because of its large pseudo-capacitance. However, MnO2 suffers from low electronic conductivity and poor cation diffusivity, which results in poor utilization and limited rate performance of traditional MnO2 powder electrodes, obtained by pressing a mixed paste of MnO2 powder, conductive additive and polymer binder onto metallic current collectors. Developing binder-free MnO2 electrodes by loading nanoscale MnO2 deposits on pre-fabricated device-ready electrode scaffolds is an effective way to achieve both high power and energy performance. These electrode scaffolds, with interconnected skeletons and pore structures, will not only provide mechanical support and electron collection as traditional current collectors but also fast ion transfer tunnels, leading to high MnO2 utilization and rate performance. This review covers design strategies, materials and fabrication methods for the electrode scaffolds. Rational evaluation of the true performance of these electrodes is carried out, which clarifies that some of the electrodes with as-claimed exceptional performances lack potential in practical applications due to poor mass loading of MnO2 and large dead volume of inert scaffold materials/void spaces in the electrode structure. Possible ways to meet this challenge and bring MnO2 electrodes from laboratory studies to real-world applications are considered.
Twisting cracks in Bouligand structures.
Suksangpanya, Nobphadon; Yaraghi, Nicholas A; Kisailus, David; Zavattieri, Pablo
2017-12-01
The Bouligand structure, which is found in many biological materials, is a hierarchical architecture that features uniaxial fiber layers assembled periodically into a helicoidal pattern. Many studies have highlighted the high damage-resistant performance of natural and biomimetic Bouligand structures. One particular species that utilizes the Bouligand structure to achieve outstanding mechanical performance is the smashing Mantis Shrimp, Odontodactylus Scyllarus (or stomatopod). The mantis shrimp generates high speed, high acceleration blows using its raptorial appendage to defeat highly armored preys. The load-bearing part of this appendage, the dactyl club, contains an interior region [16] that consists of a Bouligand structure. This region is capable of developing a significant amount of nested twisting microcracks without exhibiting catastrophic failure. The development and propagation of these microcracks are a source of energy dissipation and stress relaxation that ultimately contributes to the remarkable damage tolerance properties of the dactyl club. We develop a theoretical model to provide additional insights into the local stress intensity factors at the crack front of twisting cracks formed within the Bouligand structure. Our results reveal that changes in the local fracture mode at the crack front leads to a reduction of the local strain energy release rate, hence, increasing the necessary applied energy release rate to propagate the crack, which is quantified by the local toughening factor. Ancillary 3D simulations of the asymptotic crack front field were carried out using a J-integral to validate the theoretical values of the energy release rate and the local stress intensity factors. Copyright © 2017 Elsevier Ltd. All rights reserved.
Qian, Yuyan; Zhou, Zhongliang; Yan, Ju'e; Gao, Jianmin; Wang, Yuping; Yang, Xiaowei; Xu, Yongjian; Li, Yanli
2017-10-27
The Chinese government has long been committed to eliminating the inequality in the utilization of health services; however, it still lacks an analysis or measurement of the economy-related inequality in the utilization of women's health services. The economy-related utilization of health services in women aged 15 years and above was assessed by the horizontal inequity index of a two-week outpatient rate and annual inpatient rate from the 5th National Health Service Survey of Shaanxi Province. The concentration index of each factor was decomposed into the contribution of each factor to the economic-related inequality of health service utilization based on the Probit regression model. The horizontal inequity indexes of the two-week outpatient rate was 0.0493, and the horizontal inequity indexes of the annual impatient rate was 0.0869. The contributions of economic status to the two indexes were 190.71% and 115.80%, respectively. Economic status, age, basic medical insurance, educational status, marital status, urban/rural area, and self-rated health were the main impact factors that affected the inequality in women's health services utilization in Shaanxi. Health service utilization was different between women with different social demographic characteristics, and unequal health service utilization is evident among women in Shaanxi.
Schuster, Alexander K; Pick, Julia; Saalmann, Frauke; Pfeiffer, Norbert
2018-04-10
Eye diseases causing visual impairment increase with age. Thus, seeking eye care has a higher probability in older people. In this study, the rate of utilization of outpatient eye care services in Germany was analyzed. The analyses focused on older persons and persons in need of either home-based or facility-based long-term care. A descriptive secondary data analysis of health insurance data of the AOK Baden-Württemberg from 2016 was conducted. The study population comprised all insured persons on 1 January 2016. The cohort of older persons (60 years+) was further stratified by the type of care (home-based/facility-based) and the level of care (0-3). The utilization of outpatient eye care services was defined by the reimbursement for an ophthalmologist's provision of service. While 39.3% of the study population 60+ years old sought eye care, the utilization rate was lower among people in need of home-based (33.0%) and facility-based care (19.3%). The utilization rates showed comparable age-dependent patterns, except for persons in need of facility-based care where rates were similar for all age groups. Utilization rates were negatively associated with increasing care levels. Only people with care level 0 showed lower utilization rates than people with care level 1. Utilization rates of eye healthcare services among older persons are considerably influenced by the need of long-term care, by the form of care as well as by the level of care.
A Utility Model for Teaching Load Decisions in Academic Departments.
ERIC Educational Resources Information Center
Massey, William F.; Zemsky, Robert
1997-01-01
Presents a utility model for academic department decision making and describes the structural specifications for analyzing it. The model confirms the class-size utility asymmetry predicted by the authors' academic rachet theory, but shows that marginal utility associated with college teaching loads is always negative. Curricular structure and…
Structural health monitoring of wind turbine blades
NASA Astrophysics Data System (ADS)
Rumsey, Mark A.; Paquette, Joshua A.
2008-03-01
As electric utility wind turbines increase in size, and correspondingly, increase in initial capital investment cost, there is an increasing need to monitor the health of the structure. Acquiring an early indication of structural or mechanical problems allows operators to better plan for maintenance, possibly operate the machine in a de-rated condition rather than taking the unit off-line, or in the case of an emergency, shut the machine down to avoid further damage. This paper describes several promising structural health monitoring (SHM) techniques that were recently exercised during a fatigue test of a 9 meter glass-epoxy and carbon-epoxy wind turbine blade. The SHM systems were implemented by teams from NASA Kennedy Space Center, Purdue University and Virginia Tech. A commercial off-the-shelf acoustic emission (AE) NDT system gathered blade AE data throughout the test. At a fatigue load cycle rate around 1.2 Hertz, and after more than 4,000,000 fatigue cycles, the blade was diagnostically and visibly failing at the out-board blade spar-cap termination point at 4.5 meters. For safety reasons, the test was stopped just before the blade completely failed. This paper provides an overview of the SHM and NDT system setups and some current test results.
Su, Kai; Gong, Yihong; Wang, Chunming; Wang, Dong-An
2011-06-01
The present study aims to develop a novel open and hollow shell-structure cell microcarrier (SSCM) to improve the anchorage-dependent cell (ADC) loading efficiency, increase the space for cell proliferation and tissue regeneration, and better propel its therapeutic effects. Gelatin particles were prepared with oil/water/oil (o/w/o) technique and modified by an adjustable surface crosslinking technique and subsequent release of uncrosslinked material. Optical microscopy and scanning electron microscopy (SEM) were utilized to observe the morphologies of the microcarriers. Cell loading tests were performed to evaluate the biocompatibilities and effect on osteogenesis of SSCM. SSCMs were successfully fabricated via the surface technique. The shell-structure could allow the cell to attach and grow on both outer and inner surface of sphere and provide adequate space for cell proliferation and extracellular matrix (ECM) secretion. The cell loading rate, proliferation rate and osteogenesis-related gene expressions on the SSCMs were higher than those on the spherical gelatin microcarriers. The outstanding performance of injectable SSCMs endowed with favorable micro-structure, desirable cytocompatibility and enhanced cell affinity makes them as a good choice as cell delivery vehicle for transplanting therapeutic cells towards the scope of tissue regeneration.
When the 'soft-path' gets hard: demand management and financial instability for water utilities
NASA Astrophysics Data System (ADS)
Zeff, H. B.; Characklis, G. W.
2014-12-01
In the past, cost benefit analysis (CBA) has been viewed as an effective means of evaluating water utility strategies, particularly those that were dependent on the construction of new supply infrastructure. As water utilities have begun to embrace 'soft-path' approaches as a way to reduce the need for supply-centric development, CBA fails to recognize some important financial incentives affected by reduced water consumption. Demand management, both as a short-term response to drought and in longer-term actions to accommodate demand growth, can introduce revenue risks that adversely affect a utility's ability to repay debt, re-invest in aging infrastructure, or maintain reserve funds for use in a short-term emergency. A utility that does not generate sufficient revenue to support these functions may be subject to credit rating downgrades, which in turn affect the interest rate it pays on its debt. Interest rates are a critical consideration for utility managers in the capital-intensive water sector, where debt payments for infrastructure often account for a large portion of a utility's overall costs. Even a small increase in interest rates can add millions of dollars to the cost of new infrastructure. Recent studies have demonstrated that demand management techniques can lead to significant revenue variability, and credit rating agencies have begun to take notice of drought response plans when evaluating water utility credit ratings, providing utilities with a disincentive to fully embrace soft-path approaches. This analysis examines the impact of demand management schemes on key credit rating metrics for a water utility in Raleigh, North Carolina. The utility's consumer base is currently experiencing rapid population growth, and demand management has the potential to reduce the dependence on costly new supply infrastructure but could lead to financial instability that will significantly increase the costs of financing future projects. This work analyzes how 'soft-path' approaches might be more efficiently integrated with investment in supply-side infrastructure and suggests how financial hedging tools could be used to improve long-term utility planning objectives.
Timescales of Coherent Dynamics in the Light Harvesting Complex 2 (LH2) of Rhodobacter sphaeroides.
Fidler, Andrew F; Singh, Ved P; Long, Phillip D; Dahlberg, Peter D; Engel, Gregory S
2013-05-02
The initial dynamics of energy transfer in the light harvesting complex 2 from Rhodobacter sphaeroides were investigated with polarization controlled two-dimensional spectroscopy. This method allows only the coherent electronic motions to be observed revealing the timescale of dephasing among the excited states. We observe persistent coherence among all states and assign ensemble dephasing rates for the various coherences. A simple model is utilized to connect the spectroscopic transitions to the molecular structure, allowing us to distinguish coherences between the two rings of chromophores and coherences within the rings. We also compare dephasing rates between excited states to dephasing rates between the ground and excited states, revealing that the coherences between excited states dephase on a slower timescale than coherences between the ground and excited states.
An Overview of Combustion Mechanisms and Flame Structures for Advanced Solid Propellants
NASA Technical Reports Server (NTRS)
Beckstead, M. W.
2000-01-01
Ammonium perchlorate (AP) and cyclotretamethylenetetranitramine (HMX) are two solid ingredients often used in modern solid propellants. Although these two ingredients have very similar burning rates as monopropellants, they lead to significantly different characteristics when combined with binders to form propellants. Part of the purpose of this paper is to relate the observed combustion characteristics to the postulated flame structures and mechanisms for AP and HMX propellants that apparently lead to these similarities and differences. For AP composite, the primary diffusion flame is more energetic than the monopropellant flame, leading to an increase in burning rate over the monopropellant rate. In contrast the HMX primary diffusion flame is less energetic than the HMX monopropellant flame and ultimately leads to a propellant rate significantly less than the monopropellant rate in composite propellants. During the past decade the search for more energetic propellants and more environmentally acceptable propellants is leading to the development of propellants based on ingredients other than AP and HMX. The objective of this paper is to utilize the more familiar combustion characteristics of AP and HMX containing propellants to project the combustion characteristics of propellants made up of more advanced ingredients. The principal conclusion reached is that most advanced ingredients appear to burn by combustion mechanisms similar to HMX containing propellants rather than AP propellants.
Roifman, Idan; Wijeysundera, Harindra C; Austin, Peter C; Maclagan, Laura C; Rezai, Mohammad R; Wright, Graham A; Tu, Jack V
2017-02-01
The proliferation of cardiac diagnostic tests over the past few decades has received substantial attention from policymakers. However, contemporary population-based temporal trends of the utilization of noninvasive cardiac diagnostic tests for coronary artery disease are not known. Our objective was to examine the temporal trends in the utilization of coronary computed tomography angiography (CCTA), myocardial perfusion imaging (MPI), exercise stress testing (GXT), and stress echocardiography between 2008 and 2014. We performed a population-based repeated cross-sectional study of the adult population of Ontario between January 1, 2008 and December 31, 2014. Annual utilization rates of noninvasive cardiac diagnostic tests were computed. For each cardiac testing modality, a negative binomial regression model was used to assess temporal changes in test utilization. GXT and MPI collectively accounted for 88% of all cardiac noninvasive diagnostic tests throughout our study period. Age- and sex-standardized rates of GXT declined from 26.7/1000 adult population to 21.6/1000 adult population (mean annual reduction of 3.4%; P < 0.001). MPI rates declined from 21.1/1000 adult population to 19.5/1000 adult population (mean annual reduction of 1.3%; P < 0.001). Although utilization rates for both CCTA and stress echocardiography increased over time, the combined rate of all available tests decreased from 50.8/1000 adult population to 49.1/1000 adult population (mean annual reduction of 1.1%; P < 0.001). In conclusion, utilization rates for the most prevalent noninvasive cardiac diagnostic tests-GXT and MPI-declined over our study period. Furthermore, the overall test utilization rate also declined over time. We believe our findings are encouraging from a health policy perspective. Nonetheless, rising utilization rates for CCTA and stress echocardiography will need to be monitored in the future. Copyright © 2016 Canadian Cardiovascular Society. Published by Elsevier Inc. All rights reserved.
Facilitation as Attenuating of Environmental Stress among Structured Microbial Populations.
Martins, Suzana Cláudia Silveira; Santaella, Sandra Tédde; Martins, Claudia Miranda; Martins, Rogério Parentoni
2016-01-01
There is currently an intense debate in microbial societies on whether evolution in complex communities is driven by competition or cooperation. Since Darwin, competition for scarce food resources has been considered the main ecological interaction shaping population dynamics and community structure both in vivo and in vitro. However, facilitation may be widespread across several animal and plant species. This could also be true in microbial strains growing under environmental stress. Pure and mixed strains of Serratia marcescens and Candida rugosa were grown in mineral culture media containing phenol. Growth rates were estimated as the angular coefficients computed from linearized growth curves. Fitness index was estimated as the quotient between growth rates computed for lineages grown in isolation and in mixed cultures. The growth rates were significantly higher in associated cultures than in pure cultures and fitness index was greater than 1 for both microbial species showing that the interaction between Serratia marcescens and Candida rugosa yielded more efficient phenol utilization by both lineages. This result corroborates the hypothesis that facilitation between microbial strains can increase their fitness and performance in environmental bioremediation.
NASA Astrophysics Data System (ADS)
Agrawal, Arpana; Saroj, Rajendra K.; Dar, Tanveer A.; Baraskar, Priyanka; Sen, Pratima; Dhar, Subhabrata
2017-11-01
We report the effect of screw dislocations and oxygen vacancy defects on the optical nonlinear refraction response of ZnO films grown on a sapphire substrate at various oxygen flow rates using the chemical vapor deposition technique. The nonlinear refraction response was investigated in the off-resonant regime using a CW He-Ne laser source to examine the role of the intermediate bandgap states. It has been observed that the structural defects strongly influence the optical nonlinearity in the off-resonant regime. Nonlinearity has been found to improve as the oxygen flow rate is lowered from 2 sccm to 0.3 sccm. From photoluminescence studies, we observe that the enhanced defect density of the electronic defect levels due to the increased concentration of structural defects (with the decrease in the oxygen flow rate) is responsible for this improved optical nonlinearity along with the thermal effect. This suggests that defect engineering is an effective way to tailor the nonlinearity of ZnO films and their utility for optoelectronic device applications.
Dos Santos, Paloma L; Ward, Jonathan S; Congrave, Daniel G; Batsanov, Andrei S; Eng, Julien; Stacey, Jessica E; Penfold, Thomas J; Monkman, Andrew P; Bryce, Martin R
2018-06-01
By inverting the common structural motif of thermally activated delayed fluorescence materials to a rigid donor core and multiple peripheral acceptors, reverse intersystem crossing (rISC) rates are demonstrated in an organic material that enables utilization of triplet excited states at faster rates than Ir-based phosphorescent materials. A combination of the inverted structure and multiple donor-acceptor interactions yields up to 30 vibronically coupled singlet and triplet states within 0.2 eV that are involved in rISC. This gives a significant enhancement to the rISC rate, leading to delayed fluorescence decay times as low as 103.9 ns. This new material also has an emission quantum yield ≈1 and a very small singlet-triplet gap. This work shows that it is possible to achieve both high photoluminescence quantum yield and fast rISC in the same molecule. Green organic light-emitting diode devices with external quantum efficiency >30% are demonstrated at 76 cd m -2 .
Facilitation as Attenuating of Environmental Stress among Structured Microbial Populations
Santaella, Sandra Tédde; Martins, Claudia Miranda; Martins, Rogério Parentoni
2016-01-01
There is currently an intense debate in microbial societies on whether evolution in complex communities is driven by competition or cooperation. Since Darwin, competition for scarce food resources has been considered the main ecological interaction shaping population dynamics and community structure both in vivo and in vitro. However, facilitation may be widespread across several animal and plant species. This could also be true in microbial strains growing under environmental stress. Pure and mixed strains of Serratia marcescens and Candida rugosa were grown in mineral culture media containing phenol. Growth rates were estimated as the angular coefficients computed from linearized growth curves. Fitness index was estimated as the quotient between growth rates computed for lineages grown in isolation and in mixed cultures. The growth rates were significantly higher in associated cultures than in pure cultures and fitness index was greater than 1 for both microbial species showing that the interaction between Serratia marcescens and Candida rugosa yielded more efficient phenol utilization by both lineages. This result corroborates the hypothesis that facilitation between microbial strains can increase their fitness and performance in environmental bioremediation. PMID:26904719
Szwarcwald, Célia L; Souza-Júnior, Paulo R B; Damacena, Giseli N
2010-07-23
The Brazilian health system is founded on the principle of equity, meaning provision of equal care for equal needs. However, little is known about the impact of health policies in narrowing socioeconomic health inequalities. Using data from the Brazilian World Health Survey, this paper addresses socioeconomic inequalities in the use of outpatient services according to intensity of need. A three-stage cluster sampling was used to select 5000 adults (18 years and over). The non-response rate was 24.7% and calibration of the natural expansion factors was necessary to obtain the demographic structure of the Brazilian population. Utilization was established by use of outpatient services in the 12 months prior to the interview. Socioeconomic inequalities were analyzed by logistic regression models using years of schooling and private health insurance as independent variables, and controlling by age and sex. Effects of the socioeconomic variables on health services utilization were further analyzed according to self-rated health (good, fair and poor), considered as an indicator of intensity of health care need. Among the 5000 respondents, 63.4% used an outpatient service in the year preceding the survey. The association of health services utilization and self-rated health was significant (p < 0.001). Regarding socioeconomic inequalities, the less educated used health services less frequently, despite presenting worse health conditions. Highly significant effects were found for both socioeconomic variables, years of schooling (p < 0.001) and private health insurance (p < 0.00), after controlling for age and sex. Stratifying by self-rated health, the effects of both socioeconomic variables were significant among those with good health status, but not statistically significant among those with poor self-rated health. The analysis showed that the social gradient in outpatient services utilization decreases as the need is more intense. Among individuals with good self-rated health, possible explanations for the inequality are the lower use of preventive services and unequal supply of health services among the socially disadvantaged groups, or excessive use of health services by the wealthy. On the other hand, our results indicate an adequate performance of the Brazilian health system in narrowing socioeconomic inequalities in health in the most serious situations of need.
Managing the urban water-energy nexus
NASA Astrophysics Data System (ADS)
Escriva-Bou, Alvar; Pulido-Velazquez, Manuel; Lund, Jay R.
2016-04-01
Water use directly causes a significant amount of energy use in cities. In this paper we assess energy and greenhouse emissions related with each part of the urban water cycle and the consequences of several changes in residential water use for customers, water and energy utilities, and the environment. First, we develop an hourly model of urban water uses by customer category including water-related energy consumption. Next, using real data from East Bay Municipal Utility District in California, we calibrate a model of the energy used in water supply, treatment, pumping and wastewater treatment by the utility. Then, using data from the California Independent System Operator, we obtain hourly costs of energy for the energy utility. Finally, and using emission factors reported by the energy utilities we estimate greenhouse gas emissions for the entire urban water cycle. Results of the business-as-usual scenario show that water end uses account for almost 95% of all water-related energy use, but the 5% managed by the utility is still worth over 12 million annually. Several simulations analyze the potential benefits for water demand management actions showing that moving some water end-uses from peak to off-peak hours such as outdoor use, dishwasher or clothes washer use have large benefits for water and energy utilities, especially for locations with a high proportion of electric water heaters. Other interesting result is that under the current energy rate structures with low or no fixed charges, energy utilities burden most of the cost of the conservation actions.
Sun, Qiang
2017-10-01
With the concerns of ecological and circular economy along with sustainable development, reverse logistics has attracted the attention of enterprise. How to achieve sustainable development of reverse logistics has important practical significance of enhancing low carbon competitiveness. In this paper, the system boundary of reverse logistics carbon footprint is presented. Following the measurement of reverse logistics carbon footprint and reverse logistics carbon capacity is provided. The influencing factors of reverse logistics carbon footprint are classified into five parts such as intensity of reverse logistics, energy structure, energy efficiency, reverse logistics output, and product remanufacturing rate. The quantitative research methodology using ADF test, Johansen co-integration test, and impulse response is utilized to interpret the relationship between reverse logistics carbon footprint and the influencing factors more accurately. This research finds that energy efficiency, energy structure, and product remanufacturing rate are more capable of inhibiting reverse logistics carbon footprint. The statistical approaches will help practitioners in this field to structure their reverse logistics activities and also help academics in developing better decision models to reduce reverse logistics carbon footprint.
NASA Astrophysics Data System (ADS)
Saleth, R. Maria; Dinar, Ariel
2001-01-01
Utilizing both primary and secondary information pertaining to the water sector of Hyderabad City, India, this paper (1) evaluates the economics of various technically feasible supply augmentations options; (2) estimates the group-specific water demand and consumption response functions under alternative pricing behaviors; (3) calculates the net willingness to pay (NWTP, considered to be the value of raw water at source) of different user groups as derived from their respective price elasticities; (4) shows how inadequate the NWTP is to justify most supply augmentation options including intersectoral water transfers under the existing water rate structure; (5) argues that the economic and institutional conditions internal to urban water sector cannot justify an externally imposed water transfers, whether market-based or otherwise, as long as the water rate structure is inefficient and regressive; and (6) concludes by underlining the central role that the pricing option, both the level and structure, plays not only in activating a number of nonprice options but also in generating incentives for the emergence of new and the consolidation of existing institutional conditions needed to support economically rooted water transfers and conservation initiatives.
DXA utilization between 2006 and 2012 in commercially insured younger postmenopausal women
Overman, Robert A.; Farley, Joel F.; Curtis, Jeffrey R.; Zhang, Jie; Gourlay, Margaret L.; Deal, Chad L.
2015-01-01
Introduction Reimbursement for dual energy x-ray absorptiometry (DXA) scans in the outpatient setting has declined significantly since 2006. Research through 2011 has suggested reimbursement reductions for DXA scans have corresponded with an overall decreased utilization of DXA. This study updates utilization estimates for DXAs through 2012 in patients with commercial insurance and compares DXA rates before and after reimbursement changes. Methods We evaluated DXA utilization for women age 50–64 from Marketscan Commercial Claims and Encounter database between January 2006 and December 2012 based on CPT codes. We estimated utilization rates per 1,000 person years. We also employed segmented regression analysis of monthly rates to evaluate the change in utilization rates after a proposed reimbursement reduction in July 2009. Results In women aged 50–64; 451,656 DXAs were performed in 2006, a rate of 144 DXAs per 1,000 person years. This rate increased to 149 DXAs per 1,000 person years in 2009 before decreasing to 110 DXAs per 1,000 person years or 667,982 scans in 2012. DXA utilization increased by 2.24 per 1,000 person years until July 2009 then declined by 12.98 DXAs per 1,000 persons, resulting in 37.5 DXAs per person year fewer performed in 2012 compared to 2006. Conclusion Since July 2009 a significant decline in DXA utilization occurred in a younger postmenopausal commercially insured population. This decline corresponds with a time period of reductions in Medicare DXA reimbursement. PMID:25700662
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wang, Jie; Wu, Jianzhong; Wu, Zexing
In this paper, 3D-transition binary metal oxides have been considered as promising anode materials for lithium-ion batteries with improved reversible capacity, structural stability and electronic conductivity compared with single metal oxides. Here, carbon nanotube supported NiCo 2O 4 nanoparticles (NiCo 2O 4/CNT) with 3D hierarchical hollow structure are fabricated via a simple one-pot method. The NiCo 2O 4 nanoparticles with interconnected pores are consists of small nanocrystals. When used as anode material for the lithium-ion battery, NiCo 2O 4/CNT exhibits enhanced electrochemical performance than that of Co 3O 4/CNT and NiO/CNT. Moreover, ultra-high discharge/charge stability was obtained for 4000 cyclesmore » at a current density of 5 A g –1. The superior battery performance of NiCo 2O 4 nanoparticles is probably attributed to the special structural features and physical characteristics, including integrity, hollow structure with interconnected pores, which providing sufficient accommodation for the volume change during charge/discharge process. Besides, the consisting of ultra-small crystals enhanced the utility of active material, and intimate interaction with CNTs improved the electron-transfer rate.« less
Wang, Jie; Wu, Jianzhong; Wu, Zexing; ...
2017-05-17
In this paper, 3D-transition binary metal oxides have been considered as promising anode materials for lithium-ion batteries with improved reversible capacity, structural stability and electronic conductivity compared with single metal oxides. Here, carbon nanotube supported NiCo 2O 4 nanoparticles (NiCo 2O 4/CNT) with 3D hierarchical hollow structure are fabricated via a simple one-pot method. The NiCo 2O 4 nanoparticles with interconnected pores are consists of small nanocrystals. When used as anode material for the lithium-ion battery, NiCo 2O 4/CNT exhibits enhanced electrochemical performance than that of Co 3O 4/CNT and NiO/CNT. Moreover, ultra-high discharge/charge stability was obtained for 4000 cyclesmore » at a current density of 5 A g –1. The superior battery performance of NiCo 2O 4 nanoparticles is probably attributed to the special structural features and physical characteristics, including integrity, hollow structure with interconnected pores, which providing sufficient accommodation for the volume change during charge/discharge process. Besides, the consisting of ultra-small crystals enhanced the utility of active material, and intimate interaction with CNTs improved the electron-transfer rate.« less
Recent Trends in Imaging Use in Hospital Settings: Implications for Future Planning.
Levin, David C; Parker, Laurence; Rao, Vijay M
2017-03-01
To compare trends in utilization rates of imaging in the three hospital-based settings where imaging is conducted. The nationwide Medicare Part B databases for 2004-2014 were used. All discretionary noninvasive diagnostic imaging (NDI) CPT codes were selected and grouped by modality. Procedure volumes of each code were available from the databases and converted to utilization rates per 1,000 Medicare enrollees. Medicare's place-of-service codes were used to identify imaging examinations done in hospital inpatients, hospital outpatient departments (HOPDs), and emergency departments (EDs). Trends were observed over the life of the study. Trendlines were strongly affected by code bundling in echocardiography in 2009, nuclear imaging in 2010, and CT in 2011. However, even aside from these artifactual effects, important trends could be discerned. Inpatient imaging utilization rates of all modalities are trending downward. In HOPDs, the utilization rate of conventional radiographic examinations (CREs) is declining but rates of CT, MRI, echocardiography, and noncardiac ultrasound (US) are increasing. In EDs, utilization rates of CREs, CT, and US are increasing. In the 3 years after 2011, when no further code bundling occurred, the total inpatient NDI utilization rate dropped 15%, whereas the rate in EDs increased 12% and that in HOPDs increased 1%. The trends in utilization of NDI in the three hospital-based settings where imaging occurs are distinctly different. Radiologists and others who are involved in deciding what kinds of equipment to purchase and where to locate it should be cognizant of these trends in making their decisions. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.
Anderson, Deverick J.; Cochran, Ronda L.; Hicks, Lauri A.; Srinivasan, Arjun; Dodds Ashley, Elizabeth S.
2017-01-01
Antimicrobial stewardship programs (ASPs) positively impact patient care, but metrics to assess ASP impact are poorly defined. We used a modified Delphi approach to select relevant metrics for assessing patient-level interventions in acute-care settings for the purposes of internal program decision making. An expert panel rated 90 candidate metrics on a 9-point Likert scale for association with 4 criteria: improved antimicrobial prescribing, improved patient care, utility in targeting stewardship efforts, and feasibility in hospitals with electronic health records. Experts further refined, added, or removed metrics during structured teleconferences and re-rated the retained metrics. Six metrics were rated >6 in all criteria: 2 measures of Clostridium difficile incidence, incidence of drug-resistant pathogens, days of therapy over admissions, days of therapy over patient days, and redundant therapy events. Fourteen metrics rated >6 in all criteria except feasibility were identified as targets for future development. PMID:27927866
Deep-Sea Microbes: Linking Biogeochemical Rates to -Omics Approaches
NASA Astrophysics Data System (ADS)
Herndl, G. J.; Sintes, E.; Bayer, B.; Bergauer, K.; Amano, C.; Hansman, R.; Garcia, J.; Reinthaler, T.
2016-02-01
Over the past decade substantial progress has been made in determining deep ocean microbial activity and resolving some of the enigmas in understanding the deep ocean carbon flux. Also, metagenomics approaches have shed light onto the dark ocean's microbes but linking -omics approaches to biogeochemical rate measurements are generally rare in microbial oceanography and even more so for the deep ocean. In this presentation, we will show by combining metagenomics, -proteomics and biogeochemical rate measurements on the bulk and single-cell level that deep-sea microbes exhibit characteristics of generalists with a large genome repertoire, versatile in utilizing substrate as revealed by metaproteomics. This is in striking contrast with the apparently rather uniform dissolved organic matter pool in the deep ocean. Combining the different -omics approaches with metabolic rate measurements, we will highlight some major inconsistencies and enigmas in our understanding of the carbon cycling and microbial food web structure in the dark ocean.
Shi, Weiwei; Anderson, Mark J; Tulkoff, Joshua B; Kennedy, Brook S; Boreyko, Jonathan B
2018-04-11
Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture microscopic fog droplets, whereas fine meshes suffer from clogging issues. Here, we design and fabricate fog harvesters comprising an array of vertical wires, which we call "fog harps". Under controlled laboratory conditions, the fog-harvesting rates for fog harps with three different wire diameters were compared to conventional meshes of equivalent dimensions. As expected for the mesh structures, the mid-sized wires exhibited the largest fog collection rate, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog-harvesting rate continually increased with decreasing wire diameter for the fog harps due to efficient droplet shedding that prevented clogging. This resulted in a 3-fold enhancement in the fog-harvesting rate for the harp design compared to an equivalent mesh.
Rational Catalyst Design of Titanium-Silica Materials Aided by Site-Specific Titration Tools
NASA Astrophysics Data System (ADS)
Eaton, Todd Robert
Silica-supported titanium materials are widely used for thermocatalytic applications such as hydroxylation of alkanes and aromatics, oxidation of alcohols and ethers, ammoximation of carbonyls, and sulfoxidations, while Ti-based materials are widely studied for photocatalytic applications such as photo-oxidation of organic substrates and photo-reduction of CO 2. However, the underlying phenomena of how to synthesize, identify, and control the active structures in these materials is not well understood because of the narrow scope of previous work. Studies of titanium-based catalysts typically focus on materials where the metal is present as either highly-dispersed Ti cations or in bulk crystalline TiO2 form, neglecting the numerous and potentially useful intermediate structures. Furthermore, these works typically focus on a single synthesis technique and rely upon bulk characterization techniques to understand the materials. Here rigorous titanium-silica synthesis-structure-function relationships are established by examining several different synthetic method and utilizing characterization techniques that enable an atomic-level understanding of the materials. The materials studied span the range from isolated Ti cations to clustered TiOx domains, polymeric TiO x domains, anatase-like 2D TiO2 domains, and 3D crystalline TiO2. Tools to quantify accessible TiO x and tetrahedral Ti sites are developed, utilizing the selective titration of titanium with phenylphosphonic acid (PPA). Catalytic properties are probed with the photocatalytic oxidation of benzyl alcohol and the thermocatalytic epoxidation of cis-cyclooctene with H2O2 . PPA titration data indicate that the rate of benzyl alcohol photo-oxidation is independent of titanium coordination, while the rate of alkene epoxidation with H2O2 is proportional to the number of tetrahedral titanium sites on the catalyst. PPA titration data also enables the estimation of TiO2 particle size and reveals an important distinction between particle and crystal size, as obtained from XRD. In the course of establishing these relationships we've gained the knowledge of how to control TiO x structure, which enables the design of new and better catalysts. Understanding the synthesis-structure-function relationships allow for the design of a tandem photo/thermocatalytic reaction system for producing and consuming H2O2. By partially overcoating a TiO 2 photocatalyst with a ˜2 nm silica layer we observe a 56-fold rate improvement compared to bare-TiO2 for H2O2 synthesis from the proton-assisted reduction of O2. Addition of metal-SiO2 thermocatalysts (metal=Ti, Nb, or Ta) with sites needed for H2O2 activation creates a tandem system wherein the H2O2 produced in situ is utilized for alkene epoxidation. Compared to a thermocatalytic-only system, the tandem system accelerates epoxidation for cis-cyclooctene(11x faster), styrene(20x) and 1-octene(30x). This approach demonstrates a means for epoxidation with O2 that avoids H2O2 purification and transport, simplifies the total process, provides new opportunities for control by independent H2O2 production and consumption in the same reactor, and enhances rates relative to thermocatalytic-only epoxidation by intimately coupling H2O2 generation and consumption. Critically, establishment of titanium-silica synthesis-structure-function relationships enables the design of new catalysts and systems that are less energy- and material-intensive, leading towards more sustainable chemistry.
Yuan, Chi-Tsu; Wang, Yong-Gang; Huang, Kuo-Yen; Chen, Ting-Yu; Yu, Pyng; Tang, Jau; Sitt, Amit; Banin, Uri; Millo, Oded
2012-01-24
We utilize single-molecule spectroscopy combined with time-correlated single-photon counting to probe the electron transfer (ET) rates from various types of semiconductor hetero-nanocrystals, having either type-I or type-II band alignment, to single-walled carbon nanotubes. A significantly larger ET rate was observed for type-II ZnSe/CdS dot-in-rod nanostructures as compared to type-I spherical CdSe/ZnS core/shell quantum dots and to CdSe/CdS dot-in-rod structures. Furthermore, such rapid ET dynamics can compete with both Auger and radiative recombination processes, with significance for effective photovoltaic operation. © 2011 American Chemical Society
Trade-off decisions in distribution utility management
NASA Astrophysics Data System (ADS)
Slavickas, Rimas Anthony
As a result of the "unbundling" of traditional monopolistic electricity generation and transmission enterprises into a free-market economy, power distribution utilities are faced with very difficult decisions pertaining to electricity supply options and quality of service to the customers. The management of distribution utilities has become increasingly complex, versatile, and dynamic to the extent that conventional, non-automated management tools are almost useless and obsolete. This thesis presents a novel and unified approach to managing electricity supply options and quality of service to customers. The technique formulates the problem in terms of variables, parameters, and constraints. An advanced Mixed Integer Programming (MIP) optimization formulation is developed together with novel, logical, decision-making algorithms. These tools enable the utility management to optimize various cost components and assess their time-trend impacts, taking into account the intangible issues such as customer perception, customer expectation, social pressures, and public response to service deterioration. The above concepts are further generalized and a Logical Proportion Analysis (LPA) methodology and associated software have been developed. Solutions using numbers are replaced with solutions using words (character strings) which more closely emulate the human decision-making process and advance the art of decision-making in the power utility environment. Using practical distribution utility operation data and customer surveys, the developments outlined in this thesis are successfully applied to several important utility management problems. These involve the evaluation of alternative electricity supply options, the impact of rate structures on utility business, and the decision of whether to continue to purchase from a main grid or generate locally (partially or totally) by building Non-Utility Generation (NUG).
The economic impact of state ordered avoided cost rates for photovoltaic generated electricity
NASA Astrophysics Data System (ADS)
Bottaro, D.; Wheatley, N. J.
Various methods the states have devised to implement federal policy regarding the Public Utility Regulatory Policies Act (PURPA) of 1978, which requires that utilities pay their full 'avoided costs' to small power producers for the energy and capacity provided, are examined. The actions of several states are compared with rates estimated using utility expansion and rate-setting models, and the potential break-even capital costs of a photovoltaic system are estimated using models which calculate photovoltaic worth. The potential for the development of photovoltaics has been increased by the PURPA regulations more from the guarantee of utility purchase of photovoltaic power than from the high buy-back rates paid. The buy-back rate is high partly because of the surprisingly high effective capacity of photovoltaic systems in some locations.
An Overview of Biological Macromolecule Crystallization
Krauss, Irene Russo; Merlino, Antonello; Vergara, Alessandro; Sica, Filomena
2013-01-01
The elucidation of the three dimensional structure of biological macromolecules has provided an important contribution to our current understanding of many basic mechanisms involved in life processes. This enormous impact largely results from the ability of X-ray crystallography to provide accurate structural details at atomic resolution that are a prerequisite for a deeper insight on the way in which bio-macromolecules interact with each other to build up supramolecular nano-machines capable of performing specialized biological functions. With the advent of high-energy synchrotron sources and the development of sophisticated software to solve X-ray and neutron crystal structures of large molecules, the crystallization step has become even more the bottleneck of a successful structure determination. This review introduces the general aspects of protein crystallization, summarizes conventional and innovative crystallization methods and focuses on the new strategies utilized to improve the success rate of experiments and increase crystal diffraction quality. PMID:23727935
Koutny, Tomas
2013-11-01
This study suggests an approach for the comparison and evaluation of particular compartments with modest experimental setup costs. A glucose level prediction model was used to evaluate the compartment's glucose transport rate across the blood capillary membrane and the glucose utilization rate by the cells. The glucose levels of the blood, subcutaneous tissue, skeletal muscle tissue, and visceral fat were obtained in experiments conducted on hereditary hypertriglyceridemic rats. After the blood glucose level had undergone a rapid change, the experimenter attempted to reach a steady blood glucose level by manually correcting the glucose infusion rate and maintaining a constant insulin infusion rate. The interstitial fluid glucose levels of subcutaneous tissue, skeletal muscle tissue, and visceral fat were evaluated to determine the reaction delay compared with the change in the blood glucose level, the interstitial fluid glucose level predictability, the blood capillary permeability, the effect of the concentration gradient, and the glucose utilization rate. Based on these data, the glucose transport rate across the capillary membrane and the utilization rate in a particular tissue were determined. The rates obtained were successfully verified against positron emission tomography experiments. The subcutaneous tissue exhibits the lowest and the most predictable glucose utilization rate, whereas the skeletal muscle tissue has the greatest glucose utilization rate. In contrast, the visceral fat is the least predictable and has the shortest reaction delay compared with the change in the blood glucose level. The reaction delays obtained for the subcutaneous tissue and skeletal muscle tissue were found to be approximately equal using a metric based on the time required to reach half of the increase in the interstitial fluid glucose level. © 2013 Published by Elsevier Ltd.
Nanosecond laser coloration on stainless steel surface.
Lu, Yan; Shi, Xinying; Huang, Zhongjia; Li, Taohai; Zhang, Meng; Czajkowski, Jakub; Fabritius, Tapio; Huttula, Marko; Cao, Wei
2017-08-02
In this work, we present laser coloration on 304 stainless steel using nanosecond laser. Surface modifications are tuned by adjusting laser parameters of scanning speed, repetition rate, and pulse width. A comprehensive study of the physical mechanism leading to the appearance is presented. Microscopic patterns are measured and employed as input to simulate light-matter interferences, while chemical states and crystal structures of composites to figure out intrinsic colors. Quantitative analysis clarifies the final colors and RGB values are the combinations of structural colors and intrinsic colors from the oxidized pigments, with the latter dominating. Therefore, the engineering and scientific insights of nanosecond laser coloration highlight large-scale utilization of the present route for colorful and resistant steels.
NASA Technical Reports Server (NTRS)
Vybiral, T.; Glaeser, D. H.; Goldberger, A. L.; Rigney, D. R.; Hess, K. R.; Mietus, J.; Skinner, J. E.; Francis, M.; Pratt, C. M.
1993-01-01
OBJECTIVES. The purpose of this report was to study heart rate variability in Holter recordings of patients who experienced ventricular fibrillation during the recording. BACKGROUND. Decreased heart rate variability is recognized as a long-term predictor of overall and arrhythmic death after myocardial infarction. It was therefore postulated that heart rate variability would be lowest when measured immediately before ventricular fibrillation. METHODS. Conventional indexes of heart rate variability were calculated from Holter recordings of 24 patients with structural heart disease who had ventricular fibrillation during monitoring. The control group consisted of 19 patients with coronary artery disease, of comparable age and left ventricular ejection fraction, who had nonsustained ventricular tachycardia but no ventricular fibrillation. RESULTS. Heart rate variability did not differ between the two groups, and no consistent trends in heart rate variability were observed before ventricular fibrillation occurred. CONCLUSIONS. Although conventional heart rate variability is an independent long-term predictor of adverse outcome after myocardial infarction, its clinical utility as a short-term predictor of life-threatening arrhythmias remains to be elucidated.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fang, Yi; Liu, Fang; Klippenstein, Stephen J.
2016-07-28
The unimolecular decay of carbonyl oxide intermediates, known as Criegee intermediates, produced in alkene ozonolysis is a significant source of OH radicals in the troposphere. Here, the rate of appearance of OH radical products is examined directly in the time-domain for a prototypical alkyl-substituted Criegee intermediate, CH3CH2CHOO, following vibrational activation under collision-free conditions. Complementary statistical Rice-Ramsperger-Kassel-Marcus calculations of the microcanonical unimolecular decay rate for CH3CH2CHOO are also carried out at energies in the vicinity of the barrier for 1,4 hydrogen atom transfer that leads to OH products. Tunneling through the barrier, derived from high level electronic structure calculations, contributes significantlymore » to the decay rate. Infrared transitions of CH3CH2CHOO are identified in the CH stretch overtone region, which are detected by ultraviolet laser-induced fluorescence of the resultant OH products. The features observed are attributed to CH vibrational excitations and conformational forms utilizing insights from theory. Both experiment and theory yield unimolecular decay rates for CH3CH2CHOO of ca. 10(7) s(-1), which are slower than those obtained for syn-CH3CHOO or (CH3)(2)COO reported previously [Fang et al., J. Chem. Phys. 144, 061102 (2016)] at similar energies. Master equation modeling is also utilized to predict the thermal decay rate of CH3CH2CHOO under atmospheric conditions, giving a rate of 279 s(-1) at 298 K.« less
New knowledge-based genetic algorithm for excavator boom structural optimization
NASA Astrophysics Data System (ADS)
Hua, Haiyan; Lin, Shuwen
2014-03-01
Due to the insufficiency of utilizing knowledge to guide the complex optimal searching, existing genetic algorithms fail to effectively solve excavator boom structural optimization problem. To improve the optimization efficiency and quality, a new knowledge-based real-coded genetic algorithm is proposed. A dual evolution mechanism combining knowledge evolution with genetic algorithm is established to extract, handle and utilize the shallow and deep implicit constraint knowledge to guide the optimal searching of genetic algorithm circularly. Based on this dual evolution mechanism, knowledge evolution and population evolution can be connected by knowledge influence operators to improve the configurability of knowledge and genetic operators. Then, the new knowledge-based selection operator, crossover operator and mutation operator are proposed to integrate the optimal process knowledge and domain culture to guide the excavator boom structural optimization. Eight kinds of testing algorithms, which include different genetic operators, are taken as examples to solve the structural optimization of a medium-sized excavator boom. By comparing the results of optimization, it is shown that the algorithm including all the new knowledge-based genetic operators can more remarkably improve the evolutionary rate and searching ability than other testing algorithms, which demonstrates the effectiveness of knowledge for guiding optimal searching. The proposed knowledge-based genetic algorithm by combining multi-level knowledge evolution with numerical optimization provides a new effective method for solving the complex engineering optimization problem.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kihm, Steve; Satchwell, Andrew; Cappers, Peter
This technical brief identifies conditions under which utility regulators should consider implementing policy approaches that seek to mitigate negative outcomes due to an increase in interest rates. Interest rates are a key factor in determining a utility’s cost of equity and investors find value when returns exceed the cost of equity. Through historical observations of periods of rising and falling interest rates and application of a pro forma financial tool, we identify the key drivers of utility stock valuations and estimate the degree to which those valuations might be affected by increasing interest rates.3 We also analyze the efficacy ofmore » responses by utility regulators to mitigate potential negative financial impacts. We find that regulators have several possible approaches to mitigate a decline in value in an environment of increasing interest rates, though regulators must weigh the tradeoffs of improving investor value with potential increases in customer costs. Furthermore, the range of approaches reflects today’s many different electric utility regulatory models and regulatory responses to a decline in investor value will fit within state-specific models.« less
Multiple paths in complex tasks
NASA Technical Reports Server (NTRS)
Galanter, Eugene; Wiegand, Thomas; Mark, Gloria
1987-01-01
The relationship between utility judgments of subtask paths and the utility of the task as a whole was examined. The convergent validation procedure is based on the assumption that measurements of the same quantity done with different methods should covary. The utility measures of the subtasks were obtained during the performance of an aircraft flight controller navigation task. Analyses helped decide among various models of subtask utility combination, whether the utility ratings of subtask paths predict the whole tasks utility rating, and indirectly, whether judgmental models need to include the equivalent of cognitive noise.
Feng, Xin; Ye, Xingyou; Park, Jun-Bom; Lu, Wenli; Morott, Joe; Beissner, Brad; Lian, Zhuoyang John; Pinto, Elanor; Bi, Vivian; Porter, Stu; Durig, Tom; Majumdar, Soumyajit; Repka, Michael A.
2017-01-01
The recrystallization of an amorphous drug in a solid dispersion system could lead to a loss in the drug solubility and bioavailability. The primary objective of the current research was to use an improved kinetic model to evaluate the recrystallization kinetics of amorphous structures and to further understand the factors influencing the physical stability of amorphous solid dispersions. Amorphous solid dispersions of fenofibrate with different molecular weights of hydroxypropylcellulose, HPC (Klucel™ LF, EF, ELF) were prepared utilizing hot-melt extrusion technology. Differential scanning calorimetry was utilized to quantitatively analyze the extent of recrystallization in the samples stored at different temperatures and relative humidity (RH) conditions. The experimental data were fitted into the improved kinetics model of a modified Avrami equation to calculate the recrystallization rate constants. Klucel LF, the largest molecular weight among the HPCs used, demonstrated the greatest inhibition of fenofibrate recrystallization. Additionally, the recrystallization rate (k) decreased with increasing polymer content, however exponentially increased with higher temperature. Also k increased linearly rather than exponentially over the range of RH studied. PMID:25224341
Feng, Xin; Ye, Xingyou; Park, Jun-Bom; Lu, Wenli; Morott, Joe; Beissner, Brad; Lian, Zhuoyang John; Pinto, Elanor; Bi, Vivian; Porter, Stu; Durig, Tom; Majumdar, Soumyajit; Repka, Michael A
2015-01-01
The recrystallization of an amorphous drug in a solid dispersion system could lead to a loss in the drug solubility and bioavailability. The primary objective of the current research was to use an improved kinetic model to evaluate the recrystallization kinetics of amorphous structures and to further understand the factors influencing the physical stability of amorphous solid dispersions. Amorphous solid dispersions of fenofibrate with different molecular weights of hydroxypropylcellulose, HPC (Klucel™ LF, EF, ELF) were prepared utilizing hot-melt extrusion technology. Differential scanning calorimetry was utilized to quantitatively analyze the extent of recrystallization in the samples stored at different temperatures and relative humidity (RH) conditions. The experimental data were fitted into the improved kinetics model of a modified Avrami equation to calculate the recrystallization rate constants. Klucel LF, the largest molecular weight among the HPCs used, demonstrated the greatest inhibition of fenofibrate recrystallization. Additionally, the recrystallization rate (k) decreased with increasing polymer content, however exponentially increased with higher temperature. Also k increased linearly rather than exponentially over the range of RH studied.
NASA Astrophysics Data System (ADS)
Benner, Ronald; Peele, Emily R.; Hodson, Robert E.
1986-11-01
Dissolved organic matter was leached from [ 14C]labeled leaves of the red mangrove, Rhizophora mangle, and used in studies to determine the rates and efficiencies of microbial utilization of the water-soluble components of mangrove leaves in the Fresh Creek estuary, Bahamas. Rates of microbial utilization (assimilation plus mineralization) of mangrove leachate ranged from 0·022 to 4·675 μg ml -1 h -1 depending on the concentration of leachate and the size or diversity of microbial populations. Microflora associated with decaying mangrove leaves utilized mangrove leachate at rates up to 18-fold higher than rates of leachate utilization by planktonic microflora. Chemical analyses indicated that tannins and other potentially inhibitory phenolic compounds made up a major fraction (18%) of the dissolved organic matter in mangrove leachate. Mangrove leachate did not appear to be inhibitory to the microbial uptake of leachate or the microbial degradation of the lignocellulosic component of mangrove leaves except at high concentrations (mg ml -1). The availability of molecular oxygen also was an important parameter affecting rates of leachate utilization; rates of microbial utilization of leachate were up to 8-fold higher under aerobic rather than anaerobic conditions. The overall efficiency of conversion of mangrove leachate into microbial biomass was high and ranged from 64% to 94%. As much as 42% of the added leachate was utilized during 2 to 12 h incubations, indicating that a major fraction of the leachable material from mangrove leaves is incorporated into microbial biomass, and thus available to animals in the estuarine food web.
Deregulating electricity in the American states
NASA Astrophysics Data System (ADS)
Terbush, Thomas Lee
This dissertation develops nine stylized facts that summarize the major consequences of deregulation and tests these against recent experience in the electric utility industry. The experience of the electric utility industry matches the predictions of the stylized facts, except in one instance: although real electricity prices fell between 1982 and 1999, real prices fell less in states that deregulated. This dissertation presents three possible explanations for this discrepancy. First, through dynamic efficiency, consumers may benefit in the long run through lower rates and better service in the electricity market, or deregulation may be a public good that benefits electricity consumers through economy-wide improvements in efficiency. Second, higher prices may be a long-run outcome as predicted by the theory of the second best. Or third, both regulators and utilities may use deregulation to generate new rents. Because the original rents from regulation had dissipated, new rents could be generated under deregulation by making consumers pay off the utilities and then creating more new rents through re-regulation of the industry. Close examination tends to support the first and third explanations, although the second-best explanation cannot yet be ruled out completely. Higher prices appear to be a transitional phenomenon, resulting from a short-term payoff from consumers to incumbent utilities that was required to move deregulation forward. This payoff occurs as residential and commercial consumers bear relatively higher rates over three to five years to compensate utilities for stranded costs, investments thought to be unrecoverable under full competition. All states are benefiting from deregulation, but states that are deregulating are benefiting less while stranded costs are being recovered. This dissertation also examines California electricity deregulation and finds that the experience in California conforms with to the stylized facts, and that certain structural, demand and supply factors caused the electricity crisis in 2000 and 2001. The most important factor was the disallowance of long-term contracts and other instruments for shedding price risk, which discouraged the construction of new generating plants.
Predicting the performance of fingerprint similarity searching.
Vogt, Martin; Bajorath, Jürgen
2011-01-01
Fingerprints are bit string representations of molecular structure that typically encode structural fragments, topological features, or pharmacophore patterns. Various fingerprint designs are utilized in virtual screening and their search performance essentially depends on three parameters: the nature of the fingerprint, the active compounds serving as reference molecules, and the composition of the screening database. It is of considerable interest and practical relevance to predict the performance of fingerprint similarity searching. A quantitative assessment of the potential that a fingerprint search might successfully retrieve active compounds, if available in the screening database, would substantially help to select the type of fingerprint most suitable for a given search problem. The method presented herein utilizes concepts from information theory to relate the fingerprint feature distributions of reference compounds to screening libraries. If these feature distributions do not sufficiently differ, active database compounds that are similar to reference molecules cannot be retrieved because they disappear in the "background." By quantifying the difference in feature distribution using the Kullback-Leibler divergence and relating the divergence to compound recovery rates obtained for different benchmark classes, fingerprint search performance can be quantitatively predicted.
Dynamics of market structure driven by the degree of consumer’s rationality
NASA Astrophysics Data System (ADS)
Yanagita, Tatsuo; Onozaki, Tamotsu
2010-03-01
We study a simple model of market share dynamics with boundedly rational consumers and firms interacting with each other. As the number of consumers is large, we employ a statistical description to represent firms’ distribution of consumer share, which is characterized by a single parameter representing how rationally the mass of consumers pursue higher utility. As the boundedly rational firm does not know the shape of demand function it faces, it revises production and price so as to raise its profit with the aid of a simple reinforcement learning rule. Simulation results show that (1) three phases of market structure, i.e. the uniform share phase, the oligopolistic phase, and the monopolistic phase, appear depending upon how rational consumers are, and (2) in an oligopolistic phase, the market share distribution of firms follows Zipf’s law and the growth-rate distribution of firms follows Gibrat’s law, and (3) an oligopolistic phase is the best state of market in terms of consumers’ utility but brings the minimum profit to the firms because of severe competition based on the moderate rationality of consumers.
Abebe, Dawit Shawel; Lien, Lars; Elstad, Jon Ivar
2017-06-01
As the immigrant population rises in Norway, it becomes ever more important to consider the responsiveness of health services to the specific needs of these immigrants. It has been questioned whether access to mental healthcare is adequate among all groups of immigrants. This study aims to examine the use of specialist mental healthcare services among ethnic Norwegians and specific immigrants groups. Register data were used from the Norwegian Patient Registry and Statistics Norway. The sample (age 0-59) consisted of 3.3 million ethnic Norwegians and 200,000 immigrants from 11 countries. Poisson regression models were applied to examine variations in the use of specialist mental healthcare during 2008-2011 according to country of origin, age group, reason for immigration, and length of stay. Immigrant children and adolescents had overall significantly lower use of specialist mental healthcare than ethnic Norwegians of the same age. A distinct exception was the high utilization rate among children and youth from Iran. Among adult immigrants, utilization rates were generally lower than among ethnic Norwegians, particularly those from Poland, Somalia, Sri Lanka, and Vietnam. Adult immigrants from Iraq and Iran, however, had high utilization rates. Refugees had high utilization rates of specialist mental healthcare, while labour immigrants had low use. Utilization rates of specialist mental healthcare are lower among immigrants than Norwegians. Immigrants from Poland, Somalia, Sri Lanka, and Vietnam, had generally quite low rates, while immigrants from Iran had high utilization rates. The findings suggest that specialist mental healthcare in Norway is underutilized among considerable parts of the immigrant population.
Using Parameter Constraints to Choose State Structures in Cost-Effectiveness Modelling.
Thom, Howard; Jackson, Chris; Welton, Nicky; Sharples, Linda
2017-09-01
This article addresses the choice of state structure in a cost-effectiveness multi-state model. Key model outputs, such as treatment recommendations and prioritisation of future research, may be sensitive to state structure choice. For example, it may be uncertain whether to consider similar disease severities or similar clinical events as the same state or as separate states. Standard statistical methods for comparing models require a common reference dataset but merging states in a model aggregates the data, rendering these methods invalid. We propose a method that involves re-expressing a model with merged states as a model on the larger state space in which particular transition probabilities, costs and utilities are constrained to be equal between states. This produces a model that gives identical estimates of cost effectiveness to the model with merged states, while leaving the data unchanged. The comparison of state structures can be achieved by comparing maximised likelihoods or information criteria between constrained and unconstrained models. We can thus test whether the costs and/or health consequences for a patient in two states are the same, and hence if the states can be merged. We note that different structures can be used for rates, costs and utilities, as appropriate. We illustrate our method with applications to two recent models evaluating the cost effectiveness of prescribing anti-depressant medications by depression severity and the cost effectiveness of diagnostic tests for coronary artery disease. State structures in cost-effectiveness models can be compared using standard methods to compare constrained and unconstrained models.
Yang, Wenhao; Zhang, Taoxiang; Lin, Sen; Ni, Wuzhong
2017-06-01
The recovery of microbial community and activities is crucial to the remediation of contaminated soils. Distance-dependent variations of microbial community composition and metabolic characteristics in the rhizospheric soil of hyperaccumulator during phytoextraction are poorly understood. A 12-month phytoextraction experiment with Sedum alfredii in a Cd-contaminated soil was conducted. A pre-stratified rhizobox was used for separating sub-layer rhizospheric (0-2, 2-4, 4-6, 6-8, 8-10 mm from the root mat)/bulk soils. Soil microbial structure and function were analyzed by phospholipid fatty acid (PLFA) and MicroResp™ methods. The concentrations of total and specified PLFA biomarkers and the utilization rates for the 14 substrates (organic carbon) in the 0-2-mm sub-layer rhizospheric soil were significantly increased, as well as decreased with the increase in the distance from the root mat. Microbial structure measured by the ratios of different groups of PLFAs such as fungal/bacterial, monounsaturated/saturated, ratios of Gram-positive to Gram-negative (GP/GN) bacterial, and cyclopropyl/monoenoic precursors and 19:0 cyclo/18:1ω7c were significantly changed in the 0-2-mm soil. The PLFA contents and substrate utilization rates were negatively correlated with pH and total, acid-soluble, and reducible fractions of Cd, while positively correlated with labile carbon. The dynamics of microbial community were likely due to root exudates and Cd uptake by S. alfredii. This study revealed the stimulations and gradient changes of rhizosphere microbial community through phytoextraction, as reduced Cd concentration, pH, and increased labile carbons are due to the microbial community responses.
Health care utilization in a sample of Canadian lesbian women: predictors of risk and resilience.
Bergeron, Sherry; Senn, Charlene Y
2003-01-01
This study was designed to test an exploratory path model predicting health care utilization by lesbian women. Using structural equation modeling we examined the joint influence of internalized homophobia, feminism, comfort with health care providers (HCPs), education, and disclosure of sexual identity both in one's life and to one's HCP on health care utilization. Surveys were completed by 254 Canadian lesbian women (54% participation rate) recruited through snowball sampling and specialized media. The majority (95%) of women were White, 3% (n = 7) were women of colour, and the remaining six women did not indicate ethnicity. Participants ranged in age from 18 to 67 with a mean age of 38.85 years (SD = 9.12). In the final path model, higher education predicted greater feminism, more disclosure to HCPs, and better utilization of health services. Feminism predicted both decreased levels of internalized homophobia and increased disclosure across relationships. Being more open about one's sexual identity was related to increased disclosure to HCPs, which in turn, led to better health care utilization. Finally, the more comfortable women were with their HCP the more likely they were to seek preventive care. All paths were significant at p < .01. The path model offers insight into potential target areas for intervention with the goal of improving health care utilization in lesbian women.
NASA Astrophysics Data System (ADS)
Lawson, M. J.; Rhodes, E.; Yin, A.
2016-12-01
In most textbooks, the San Andreas Fault is stated to be the plate boundary between the North American and the Pacific plates, as plate tectonics assumes that boundaries are essentially discrete. In the Western United States this is not the case, as up to 25% of relative plate motion is accommodated on other structures within the Walker Lane Shear Zone (WLSZ) in a diffuse 100 km margin (Faulds et al., 2005; Oldow et al., 2001). Fish Lake Valley Fault Zone (FLVFZ), situated at the northern border of Death Valley National Park, is the northern continuation of the Furnace Creek Fault Zone (FCFZ), and is an important transfer structure within the Walker Lane Shear Zone. Though the FLVFZ has a long term rate (since 10 Ma) of 5 mm/yr (Reheis and Sawyer, 1997), it has a highly variable slip rate. In the middle Pleistocene, the rate has a maximum of up to 11 mm/yr which would accommodate nearly the entirety of slip within the Walker Lane, and yet this rate decreases significantly ( 2.5 to 3 mm/yr) by the late Pleistocene due to unknown causes (Frankel et al. 2007). This variation in slip rate has been proposed by previous workers to be due to strain transience, an increase in the overall strain rate, or due to other unknown structures (Lee et al., 2009). Currently, we are investigating the cause of this variation, and the possibility of the transfer of slip to faults south of the FLVFZ on oblique normal faults within Eureka and Deep Springs Valleys. Preliminary data will be shown utilizing scarp transects, geomorphic scarp modeling, and Optically Stimulated Luminescence (OSL) dating techniques.
NASA Technical Reports Server (NTRS)
Lim, J. T.; Raper, C. D. Jr; Gold, H. J.; Wilkerson, G. G.; Raper CD, J. r. (Principal Investigator)
1989-01-01
A simple mathematical model for calculating the concentration of mobile carbon skeletons in the shoot of soya bean plants [Glycine max (L.) Merrill cv. Ransom] was built to examine the suitability of measured net photosynthetic rates (PN) for calculation of saccharide flux into the plant. The results suggest that either measurement of instantaneous PN overestimated saccharide influx or respiration rates utilized in the model were underestimated. If neither of these is the case, end-product inhibition of photosynthesis or waste respiration through the alternative pathway should be included in modelling of CH2O influx or efflux; and even if either of these is the case, the model output at a low coefficient of leaf activity indicates that PN still may be controlled by either end-product inhibition or alternative respiration.
Genetic co-structuring in host-parasite systems: Empirical data from raccoons and raccoon ticks
Dharmarajan, Guha; Beasley, James C.; Beatty, William S.; ...
2016-03-31
Many aspects of parasite biology critically depend on their hosts, and understanding how host-parasite populations are co-structured can help improve our understanding of the ecology of parasites, their hosts, and host-parasite interactions. Here, this study utilized genetic data collected from raccoons (Procyon lotor), and a specialist parasite, the raccoon tick (Ixodes texanus), to test for genetic co-structuring of host-parasite populations at both landscape and host scales. At the landscape scale, our analyses revealed a significant correlation between genetic and geographic distance matrices (i.e., isolation by distance) in ticks, but not their hosts. While there are several mechanisms that could leadmore » to a stronger pattern of isolation by distance in tick vs. raccoon datasets, our analyses suggest that at least one reason for the above pattern is the substantial increase in statistical power (due to the ≈8-fold increase in sample size) afforded by sampling parasites. Host-scale analyses indicated higher relatedness between ticks sampled from related vs. unrelated raccoons trapped within the same habitat patch, a pattern likely driven by increased contact rates between related hosts. Lastly, by utilizing fine-scale genetic data from both parasites and hosts, our analyses help improve our understanding of epidemiology and host ecology.« less
Linear Quadratic Tracking Design for a Generic Transport Aircraft with Structural Load Constraints
NASA Technical Reports Server (NTRS)
Burken, John J.; Frost, Susan A.; Taylor, Brian R.
2011-01-01
When designing control laws for systems with constraints added to the tracking performance, control allocation methods can be utilized. Control allocations methods are used when there are more command inputs than controlled variables. Constraints that require allocators are such task as; surface saturation limits, structural load limits, drag reduction constraints or actuator failures. Most transport aircraft have many actuated surfaces compared to the three controlled variables (such as angle of attack, roll rate & angle of side slip). To distribute the control effort among the redundant set of actuators a fixed mixer approach can be utilized or online control allocation techniques. The benefit of an online allocator is that constraints can be considered in the design whereas the fixed mixer cannot. However, an online control allocator mixer has a disadvantage of not guaranteeing a surface schedule, which can then produce ill defined loads on the aircraft. The load uncertainty and complexity has prevented some controller designs from using advanced allocation techniques. This paper considers actuator redundancy management for a class of over actuated systems with real-time structural load limits using linear quadratic tracking applied to the generic transport model. A roll maneuver example of an artificial load limit constraint is shown and compared to the same no load limitation maneuver.
Knutson, Stacy T; Westwood, Brian M; Leuthaeuser, Janelle B; Turner, Brandon E; Nguyendac, Don; Shea, Gabrielle; Kumar, Kiran; Hayden, Julia D; Harper, Angela F; Brown, Shoshana D; Morris, John H; Ferrin, Thomas E; Babbitt, Patricia C; Fetrow, Jacquelyn S
2017-04-01
Protein function identification remains a significant problem. Solving this problem at the molecular functional level would allow mechanistic determinant identification-amino acids that distinguish details between functional families within a superfamily. Active site profiling was developed to identify mechanistic determinants. DASP and DASP2 were developed as tools to search sequence databases using active site profiling. Here, TuLIP (Two-Level Iterative clustering Process) is introduced as an iterative, divisive clustering process that utilizes active site profiling to separate structurally characterized superfamily members into functionally relevant clusters. Underlying TuLIP is the observation that functionally relevant families (curated by Structure-Function Linkage Database, SFLD) self-identify in DASP2 searches; clusters containing multiple functional families do not. Each TuLIP iteration produces candidate clusters, each evaluated to determine if it self-identifies using DASP2. If so, it is deemed a functionally relevant group. Divisive clustering continues until each structure is either a functionally relevant group member or a singlet. TuLIP is validated on enolase and glutathione transferase structures, superfamilies well-curated by SFLD. Correlation is strong; small numbers of structures prevent statistically significant analysis. TuLIP-identified enolase clusters are used in DASP2 GenBank searches to identify sequences sharing functional site features. Analysis shows a true positive rate of 96%, false negative rate of 4%, and maximum false positive rate of 4%. F-measure and performance analysis on the enolase search results and comparison to GEMMA and SCI-PHY demonstrate that TuLIP avoids the over-division problem of these methods. Mechanistic determinants for enolase families are evaluated and shown to correlate well with literature results. © 2017 The Authors Protein Science published by Wiley Periodicals, Inc. on behalf of The Protein Society.
Singh, Pritam; Aggarwal, Rajesh; Tahir, Muaaz; Pucher, Philip H; Darzi, Ara
2015-05-01
This study evaluates whether video-based coaching can enhance laparoscopic surgical skills performance. Many professions utilize coaching to improve performance. The sports industry employs video analysis to maximize improvement from every performance. Laparoscopic novices were baseline tested and then trained on a validated virtual reality (VR) laparoscopic cholecystectomy (LC) curriculum. After competence, subjects were randomized on a 1:1 ratio and each performed 5 VRLCs. After each LC, intervention group subjects received video-based coaching by a surgeon, utilizing an adaptation of the GROW (Goals, Reality, Options, Wrap-up) coaching model. Control subjects viewed online surgical lectures. All subjects then performed 2 porcine LCs. Performance was assessed by blinded video review using validated global rating scales. Twenty subjects were recruited. No significant differences were observed between groups in baseline performance and in VRLC1. For each subsequent repetition, intervention subjects significantly outperformed controls on all global rating scales. Interventions outperformed controls in porcine LC1 [Global Operative Assessment of Laparoscopic Skills: (20.5 vs 15.5; P = 0.011), Objective Structured Assessment of Technical Skills: (21.5vs 14.5; P = 0.001), and Operative Performance Rating System: (26 vs 19.5; P = 0.001)] and porcine LC2 [Global Operative Assessment of Laparoscopic Skills: (28 vs 17.5; P = 0.005), Objective Structured Assessment of Technical Skills: (30 vs 16.5; P < 0.001), and Operative Performance Rating System: (36 vs 21; P = 0.004)]. Intervention subjects took significantly longer than controls in porcine LC1 (2920 vs 2004 seconds; P = 0.009) and LC2 (2297 vs 1683; P = 0.003). Despite equivalent exposure to practical laparoscopic skills training, video-based coaching enhanced the quality of laparoscopic surgical performance on both VR and porcine LCs, although at the expense of increased time. Video-based coaching is a feasible method of maximizing performance enhancement from every clinical exposure.
18 CFR 35.23 - General provisions.
Code of Federal Regulations, 2012 CFR
2012-04-01
... sale of electric energy in a coordination transaction by a public utility if that sale requires the use... filing must apply consistent treatment to all coordination rate schedules. If the filing does not apply consistent rate treatment, the public utility must explain why it does not do so. (3) If a public utility...
18 CFR 35.23 - General provisions.
Code of Federal Regulations, 2013 CFR
2013-04-01
... sale of electric energy in a coordination transaction by a public utility if that sale requires the use... filing must apply consistent treatment to all coordination rate schedules. If the filing does not apply consistent rate treatment, the public utility must explain why it does not do so. (3) If a public utility...
18 CFR 35.23 - General provisions.
Code of Federal Regulations, 2014 CFR
2014-04-01
... sale of electric energy in a coordination transaction by a public utility if that sale requires the use... filing must apply consistent treatment to all coordination rate schedules. If the filing does not apply consistent rate treatment, the public utility must explain why it does not do so. (3) If a public utility...
Bai, Shao-Yuan; Song, Zhi-Xin; Ding, Yan-Li; You, Shao-Hong; He, Shan
2014-02-01
The correlation of substrate structure and hydraulic characteristics was studied by numerical simulation combined with experimental method. The numerical simulation results showed that the permeability coefficient of matrix had a great influence on hydraulic efficiency in subsurface flow constructed wetlands. The filler with a high permeability coefficient had a worse flow field distribution in the constructed wetland with single layer structure. The layered substrate structure with the filler permeability coefficient increased from surface to bottom could avoid the short-circuited flow and dead-zones, and thus, increased the hydraulic efficiency. Two parallel pilot-scale constructed wetlands were built according to the numerical simulation results, and tracer experiments were conducted to validate the simulation results. The tracer experiment result showed that hydraulic characteristics in the layered constructed wetland were obviously better than that in the single layer system, and the substrate effective utilization rates were 0.87 and 0.49, respectively. It was appeared that numerical simulation would be favorable for substrate structure optimization in subsurface flow constructed wetlands.
Evaluating structural pattern recognition for handwritten math via primitive label graphs
NASA Astrophysics Data System (ADS)
Zanibbi, Richard; MoucheÌre, Harold; Viard-Gaudin, Christian
2013-01-01
Currently, structural pattern recognizer evaluations compare graphs of detected structure to target structures (i.e. ground truth) using recognition rates, recall and precision for object segmentation, classification and relationships. In document recognition, these target objects (e.g. symbols) are frequently comprised of multiple primitives (e.g. connected components, or strokes for online handwritten data), but current metrics do not characterize errors at the primitive level, from which object-level structure is obtained. Primitive label graphs are directed graphs defined over primitives and primitive pairs. We define new metrics obtained by Hamming distances over label graphs, which allow classification, segmentation and parsing errors to be characterized separately, or using a single measure. Recall and precision for detected objects may also be computed directly from label graphs. We illustrate the new metrics by comparing a new primitive-level evaluation to the symbol-level evaluation performed for the CROHME 2012 handwritten math recognition competition. A Python-based set of utilities for evaluating, visualizing and translating label graphs is publicly available.
NASA Astrophysics Data System (ADS)
Mohanty, Ritesh P.; Zia, Roseanna N.
2017-11-01
We theoretically study the impact of particle roughness, Brownian motion, and hydrodynamic interactions on the relaxation of colloidal dispersions by examining the structural and rheological relaxation after microrheological flow cessation. In particular, we focus on the disparity in timescales over which hydrodynamic and entropic forces act and influence colloidal relaxation. To do this, we employ the active microrheology framework, in which a colloidal probe, driven by an arbitrarily strong external force, interacts with many surrounding particle configurations before reaching steady-state motion. We utilize the steady-state structure around the probe as the initial condition in a Smoluchowski equation that we solve to obtain the structural evolution upon flow cessation. We systematically tune the strength of hydrodynamic and entropic forces, and study their influence on structural and rheological relaxation. Upon cessation, the non-Newtonian behavior arising directly from hydrodynamic forces dissipates instantaneously, while the entropic contributions decay over longer times. We find that increasing pre-cessation external flow strength enhances the relaxation rate, while hydrodynamic interactions slow down the relaxation.
High-throughput determination of structural phase diagram and constituent phases using GRENDEL
NASA Astrophysics Data System (ADS)
Kusne, A. G.; Keller, D.; Anderson, A.; Zaban, A.; Takeuchi, I.
2015-11-01
Advances in high-throughput materials fabrication and characterization techniques have resulted in faster rates of data collection and rapidly growing volumes of experimental data. To convert this mass of information into actionable knowledge of material process-structure-property relationships requires high-throughput data analysis techniques. This work explores the use of the Graph-based endmember extraction and labeling (GRENDEL) algorithm as a high-throughput method for analyzing structural data from combinatorial libraries, specifically, to determine phase diagrams and constituent phases from both x-ray diffraction and Raman spectral data. The GRENDEL algorithm utilizes a set of physical constraints to optimize results and provides a framework by which additional physics-based constraints can be easily incorporated. GRENDEL also permits the integration of database data as shown by the use of critically evaluated data from the Inorganic Crystal Structure Database in the x-ray diffraction data analysis. Also the Sunburst radial tree map is demonstrated as a tool to visualize material structure-property relationships found through graph based analysis.
Laser surface treatment of porous ceramic substrate for application in solid oxide fuel cells
NASA Astrophysics Data System (ADS)
Mahmod, D. S. A.; Khan, A. A.; Munot, M. A.; Glandut, N.; Labbe, J. C.
2016-08-01
Laser has offered a large number of benefits for surface treatment of ceramics due to possibility of localized heating, very high heating/cooling rates and possibility of growth of structural configurations only produced under non-equilibrium high temperature conditions. The present work investigates oxidation of porous ZrB2-SiC sintered ceramic substrates through treatment by a 1072 ± 10 nm ytterbium fiber laser. A multi-layer structure is hence produced showing successively oxygen rich distinct layers. The porous bulk beneath these layers remained unaffected as this laser-formed oxide scale and protected the substrate from oxidation. A glassy SiO2 structure thus obtained on the surface of the substrate becomes subject of interest for further research, specifically for its utilization as solid protonic conductor in Solid Oxide Fuel Cells (SOFCs).
Regenerable MgO promoted metal oxide oxygen carriers for chemical looping combustion
Siriwardane, Ranjani V.; Miller, Duane D.
2014-08-19
The disclosure provides an oxygen carrier comprised of a plurality of metal oxide particles in contact with a plurality of MgO promoter particles. The MgO promoter particles increase the reaction rate and oxygen utilization of the metal oxide when contacting with a gaseous hydrocarbon at a temperature greater than about 725.degree. C. The promoted oxide solid is generally comprised of less than about 25 wt. % MgO, and may be prepared by physical mixing, incipient wetness impregnation, or other methods known in the art. The oxygen carrier exhibits a crystalline structure of the metal oxide and a crystalline structure of MgO under XRD crystallography, and retains these crystalline structures over subsequent redox cycles. In an embodiment, the metal oxide is Fe.sub.2O.sub.3, and the gaseous hydrocarbon is comprised of methane.
Phillips, Kathryn A; Deverka, Patricia A; Sox, Harold C; Khoury, Muin J; Sandy, Lewis G; Ginsburg, Geoffrey S; Tunis, Sean R; Orlando, Lori A; Douglas, Michael P
2017-10-01
Comparative effectiveness research (CER) in genomic medicine (GM) measures the clinical utility of using genomic information to guide clinical care in comparison to appropriate alternatives. We summarized findings of high-quality systematic reviews that compared the analytic and clinical validity and clinical utility of GM tests. We focused on clinical utility findings to summarize CER-derived evidence about GM and identify evidence gaps and future research needs. We abstracted key elements of study design, GM interventions, results, and study quality ratings from 21 systematic reviews published in 2010 through 2015. More than half (N = 13) of the reviews were of cancer-related tests. All reviews identified potentially important clinical applications of the GM interventions, but most had significant methodological weaknesses that largely precluded any conclusions about clinical utility. Twelve reviews discussed the importance of patient-centered outcomes, although few described evidence about the impact of genomic medicine on these outcomes. In summary, we found a very limited body of evidence about the effect of using genomic tests on health outcomes and many evidence gaps for CER to address.Genet Med advance online publication 13 April 2017.
Sitting duck or wise old owl. [electricity generation and transmission and public relations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rappoport, D.M.
Utilities are building few generating stations these days, but modest customer growth means that transmission and distribution facilities must be built or rebuilt in the coming years. This means a customer typically opposing a construction project is likely to be a suburbanite worried about the effect a distribution or transmission line or substation may have on home values as well as the potential health risks posed by that facility. Those worried about the prospect of falling home prices or potential health risks have the motivation and the means to make life difficult for utilities that don't understand how the rulesmore » of the game have changed. While the profile of the protestors has changed in recent years, the views of many utility executives have not. Too many still believe the public can be ignored when it comes to siting facilities or structuring rates. Utilities will spend mightily to mollify the public after it becomes angry. But it would be less costly - and more productive - to invest in advance in an ongoing program to help avoid an angry public. If that approach is successful, those in media and government relations will find they have fewer brushfires.« less
Phillips, Kathryn A.; Deverka, Patricia A.; Sox, Harold C.; Khoury, Muin J.; Sandy, Lewis G.; Ginsburg, Geoffrey S.; Tunis, Sean R.; Orlando, Lori A.; Douglas, Michael P.
2017-01-01
Comparative effectiveness research (CER) in genomic medicine (GM) measures the clinical utility of using genomic information to guide clinical care in comparison to appropriate alternatives. We summarized findings of high-quality systematic reviews that compared the analytic and clinical validity and clinical utility of GM tests. We focused on clinical utility findings to summarize CER-derived evidence about GM and identify evidence gaps and future research needs. We abstracted key elements of study design, GM interventions, results, and study quality ratings from 21 systematic reviews published in 2010 through 2015. More than half (N = 13) of the reviews were of cancer-related tests. All reviews identified potentially important clinical applications of the GM interventions, but most had significant methodological weaknesses that largely precluded any conclusions about clinical utility. Twelve reviews discussed the importance of patient-centered outcomes, although few described evidence about the impact of genomic medicine on these outcomes. In summary, we found a very limited body of evidence about the effect of using genomic tests on health outcomes and many evidence gaps for CER to address. Genet Med advance online publication 13 April 2017 PMID:28406488
NASA Astrophysics Data System (ADS)
Liu, Ying; Yan, De; Zhuo, Renfu; Li, Shuankui; Wu, Zhiguo; Wang, Jun; Ren, Pingyuan; Yan, Pengxun; Geng, Zhongrong
2013-11-01
MnO2-graphene hybrid with a unique structure of porous birnessite-type manganese dioxide (MnO2) nanosheets on graphene has been designed and synthesized by a simple hydrothermal method. The formation mechanism of the hybrid is discussed based on a series of time-dependent experiments. Electrochemical measurements reveal that the MnO2-graphene electrode exhibits much higher specific capacitance (315 F g-1 at a current density of 0.2 A g-1) and better rate capability (even 193 F g-1 at 6 A g-1) compared with both the graphene and MnO2 electrodes. Moreover, the capacitance of MnO2-graphene electrode is still 87% retained after 2000 cycles at a charging rate of 3 A g-1. The superior capacitive performance of the hybrid is attributed to its unique structure, which provides good electronic conductivity, fast electron and ion transport, and high utilization of MnO2.
Contribution to applications of EBW in instrument techniques
NASA Astrophysics Data System (ADS)
Hrabovsky, Miroslav
1999-07-01
The electron beam welding belongs to so-called physical methods of welding and it is utilized to welding of most materials, that can be arc welded. It is of use there, where one taxing welding technics and structure technologyableless heavily. As a rule, the quality of weld is better than at most first-rate welds being done by inert gas shielded arc welding (WIG, Argoarc). In plant instrumentation, where the limitation of any welded material distortion is of extraordinary importance, this way of welding is significant at welding of thermal-treated Cu-Be alloys, used in measurement technics, structural members from Ti alloys and stainless steels in branches of biomedicine and cryotechnics. This technology positives, especially high weld purity, narrow and deep root penetration, high welding rate, together with low energy consumption, lead to applications and verification of optimum operating mode at welding of frequent materials. In the contribution the results of this proofs of selected welded materials from viewpoint of weld quality, their physical-mechanic properties and microhardness, are presented.
Moderate temperature rechargeable sodium batteries
NASA Technical Reports Server (NTRS)
Abraham, K. M.; Rupich, M. W.; Pitts, L.; Elliott, J. E.
1983-01-01
Cells utilizing the organic electrolyte, NaI in triglyme, operated at approx. 130 C with Na(+) - intercalating cathodes. However, their rate and stability were inadequate. NaAlCl4 was found to be a highly useful electrolyte for cell operation at 165-190 C. Na(+) intercalating chalcogenides reacted with NaAlCl4 during cycling to form stable phases. Thus, VS2 became essentially VS2Cl, with reversible capacity of approx 2.8 e(-)/V, and a mid-discharge voltage of approx 2.5V and 100 deep discharge cycles were readily achieved. A positive electrode consisting of VCl3 and S plus NaAlCl4 was subjected to deep-discharge cycles 300 times and it demonstrated identity with the in-situ-formed BSxCly cathode. NiS2 and NiS which are not Na(+)-intercalating structures formed highly reversible electrodes in NaAlCl4. The indicated discharge mechanism implies a theoretical capacity 4e(-)/Ni for NiS2 and 2e(-)/Ni for NiS. The mid-discharge potentials are, respectively, 2.4V and 2.1V. A Na/NiS2 cell cycling at a C/5 rate has exceeded 500 deep discharge cycles with 2.5e(-)/Ni average utilization. A 4 A-hr nominal capacity prototype Na/NiS2 cell was tested at 190 C. It was voluntarily terminated after 80 cycles. Further development, particularly of cathode structure and hardware should produce a battery capable of at least 50-W-hr/lb and more than 1000 cycles.
Maximum demand charge rates for commercial and industrial electricity tariffs in the United States
DOE Office of Scientific and Technical Information (OSTI.GOV)
McLaren, Joyce; Gagnon, Pieter; Zimny-Schmitt, Daniel
NREL has assembled a list of U.S. retail electricity tariffs and their associated demand charge rates for the Commercial and Industrial sectors. The data was obtained from the Utility Rate Database. Keep the following information in mind when interpreting the data: (1) These data were interpreted and transcribed manually from utility tariff sheets, which are often complex. It is a certainty that these data contain errors, and therefore should only be used as a reference. Actual utility tariff sheets should be consulted if an action requires this type of data. (2) These data only contains tariffs that were entered intomore » the Utility Rate Database. Since not all tariffs are designed in a format that can be entered into the Database, this list is incomplete - it does not contain all tariffs in the United States. (3) These data may have changed since this list was developed (4) Many of the underlying tariffs have additional restrictions or requirements that are not represented here. For example, they may only be available to the agricultural sector or closed to new customers. (5) If there are multiple demand charge elements in a given tariff, the maximum demand charge is the sum of each of the elements at any point in time. Where tiers were present, the highest rate tier was assumed. The value is a maximum for the year, and may be significantly different from demand charge rates at other times in the year. Utility Rate Database: https://openei.org/wiki/Utility_Rate_Database« less
Kawaguchi, Hideo; Yoshihara, Kumiko; Hara, Kiyotaka Y; Hasunuma, Tomohisa; Ogino, Chiaki; Kondo, Akihiko
2018-05-17
L-Arabinose is the second most abundant component of hemicellulose in lignocellulosic biomass, next to D-xylose. However, few microorganisms are capable of utilizing pentoses, and catabolic genes and operons enabling bacterial utilization of pentoses are typically subject to carbon catabolite repression by more-preferred carbon sources, such as D-glucose, leading to a preferential utilization of D-glucose over pentoses. In order to simultaneously utilize both D-glucose and L-arabinose at the same rate, a modified metabolic pathway was rationally designed based on metabolome analysis. Corynebacterium glutamicum ATCC 31831 utilized D-glucose and L-arabinose simultaneously at a low concentration (3.6 g/L each) but preferentially utilized D-glucose over L-arabinose at a high concentration (15 g/L each), although L-arabinose and D-glucose were consumed at comparable rates in the absence of the second carbon source. Metabolome analysis revealed that phosphofructokinase and pyruvate kinase were major bottlenecks for D-glucose and L-arabinose metabolism, respectively. Based on the results of metabolome analysis, a metabolic pathway was engineered by overexpressing pyruvate kinase in combination with deletion of araR, which encodes a repressor of L-arabinose uptake and catabolism. The recombinant strain utilized high concentrations of D-glucose and L-arabinose (15 g/L each) at the same consumption rate. During simultaneous utilization of both carbon sources at high concentrations, intracellular levels of phosphoenolpyruvate declined and acetyl-CoA levels increased significantly as compared with the wild-type strain that preferentially utilized D-glucose. These results suggest that overexpression of pyruvate kinase in the araR deletion strain increased the specific consumption rate of L-arabinose and that citrate synthase activity becomes a new bottleneck in the engineered pathway during the simultaneous utilization of D-glucose and L-arabinose. Metabolome analysis identified potential bottlenecks in D-glucose and L-arabinose metabolism and was then applied to the following rational metabolic engineering. Manipulation of only two genes enabled simultaneous utilization of D-glucose and L-arabinose at the same rate in metabolically engineered C. glutamicum. This is the first report of rational metabolic design and engineering for simultaneous hexose and pentose utilization without inactivating the phosphotransferase system.
NASA Astrophysics Data System (ADS)
Dolan, K. A.; Hurtt, G. C.; Fisk, J.; Flanagan, S.; LePage, Y.; Sahajpal, R.
2014-12-01
Disturbance plays a critical role in shaping the structure and function of forested ecosystems as well as the ecosystem services they provide, including but not limited to: carbon storage, biodiversity habitat, water quality and flow, and land atmosphere exchanges of energy and water. As recent studies highlight novel disturbance regimes resulting from pollution, invasive pests and climate change, there is a need to include these alterations in predictions of future forest function and structure. The Ecosystem Demography (ED) model is a mechanistic model of forest ecosystem dynamics in which individual-based forest dynamics can be efficiently implemented over regional to global scales due to advanced scaling methods. We utilize ED to characterize the sensitivity of potential vegetation structure and function to changes in rates of density independent mortality. Disturbance rate within ED can either be altered directly or through the development of sub-models. Disturbance sub-models in ED currently include fire, land use and hurricanes. We use a tiered approach to understand the sensitivity of North American ecosystems to changes in background density independent mortality. Our first analyses were conducted at half-degree spatial resolution with a constant rate of disturbance in space and time, which was altered between runs. Annual climate was held constant at the site level and the land use and fire sub-models were turned off. Results showed an ~ 30% increase in non-forest area across the US when disturbance rates were changed from 0.6% a year to 1.2% a year and a more than 3.5 fold increase in non-forest area when disturbance rates doubled again from 1.2% to 2.4%. Continued runs altered natural background disturbance rates with the existing fire and hurricane sub models turned on as well as historic and future land use. By quantify differences between model outputs that characterize ecosystem structure and function related to the carbon cycle across the US, we are identifying areas and characteristics that display higher sensitivities to change in disturbance rates.
Designing a Quantitative Structure-Activity Relationship for the ...
Toxicokinetic models serve a vital role in risk assessment by bridging the gap between chemical exposure and potentially toxic endpoints. While intrinsic metabolic clearance rates have a strong impact on toxicokinetics, limited data is available for environmentally relevant chemicals including nearly 8000 chemicals tested for in vitro bioactivity in the Tox21 program. To address this gap, a quantitative structure-activity relationship (QSAR) for intrinsic metabolic clearance rate was developed to offer reliable in silico predictions for a diverse array of chemicals. Models were constructed with curated in vitro assay data for both pharmaceutical-like chemicals (ChEMBL database) and environmentally relevant chemicals (ToxCast screening) from human liver microsomes (2176 from ChEMBL) and human hepatocytes (757 from ChEMBL and 332 from ToxCast). Due to variability in the experimental data, a binned approach was utilized to classify metabolic rates. Machine learning algorithms, such as random forest and k-nearest neighbor, were coupled with open source molecular descriptors and fingerprints to provide reasonable estimates of intrinsic metabolic clearance rates. Applicability domains defined the optimal chemical space for predictions, which covered environmental chemicals well. A reduced set of informative descriptors (including relative charge and lipophilicity) and a mixed training set of pharmaceuticals and environmentally relevant chemicals provided the best intr
DOE Office of Scientific and Technical Information (OSTI.GOV)
Darghouth, Naim; Barbose, Galen; Wiser, Ryan
2013-01-09
Customer-sited photovoltaic (PV) systems in the United States are often compensated at the customer’s underlying retail electricity rate through net metering. Calculations of the customer economics of PV, meanwhile, often assume that retail rate structures and PV compensation mechanisms will not change and that retail electricity prices will increase (or remain constant) over time, thereby also increasing (or keeping constant) the value of bill savings from PV. Given the multitude of potential changes to retail rates and PV compensation mechanisms in the future, however, understanding how such changes might impact the value of bill savings from PV is critical formore » policymakers, regulators, utilities, the solar industry, and potential PV owners, i.e., any stakeholder interested in understanding uncertainties in and potential changes to the long-term customer economics of PV. This scoping study investigates the impact of, and interactions among, three key sources of uncertainty in the future value of bill savings from customer-sited PV, focusing in particular on residential customers. These three sources of uncertainty are: changes to electricity market conditions that would affect retail electricity prices, changes to the types of retail rate structures available to residential customers with PV, and shifts away from standard net-metering toward other compensation mechanisms for residential PV.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kirikae, M.; Diksic, M.; Yamamoto, Y.L.
1989-02-01
We examined the rate of glucose utilization and the rate of valine incorporation into proteins using 2-(/sup 18/F)fluoro-2-deoxyglucose and L-(1-14C)-valine in a rat brain tumor model by quantitative double-tracer autoradiography. We found that in the implanted tumor the rate of valine incorporation into proteins was about 22 times and the rate of glucose utilization was about 1.5 times that in the contralateral cortex. (In the ipsilateral cortex, the tumor had a profound effect on glucose utilization but no effect on the rate of valine incorporation into proteins.) Our findings suggest that it is more useful to measure protein synthesis thanmore » glucose utilization to assess the effectiveness of antitumor agents and their toxicity to normal brain tissue. We compared two methods to estimate the rate of valine incorporation: kinetic (quantitation done using an operational equation and the average brain rate coefficients) and washed slices (unbound labeled valine removed by washing brain slices in 10% trichloroacetic acid). The results were the same using either method. It would seem that the kinetic method can thus be used for quantitative measurement of protein synthesis in brain tumors and normal brain tissue using (/sup 11/C)-valine with positron emission tomography.« less
2013-01-01
Background Incorporation of information technology advancements in healthcare has gained wide acceptance in the last two decades. Developed countries have successfully incorporated information technology advancements in their healthcare system thus, improving healthcare. However, only a limited application of information technology advancements is seen in developing countries in their healthcare system. Hence, this study was aimed at assessing knowledge and utilization of computer among health workers in Addis Ababa hospitals. Methods A quantitative cross-sectional study was conducted among 304 health workers who were selected using stratified sampling technique from all governmental hospitals in Addis Ababa. Data was collected from April 15 to April 30, 2010 using a structured, self-administered, and pre-tested questionnaire from five government hospitals in Addis Ababa. The data was entered into Epi Info version 3.5.1 and exported to SPSS version 16. Analysis was done using multinomial logistic regression technique. Results A total of 270 participants, age ranging from 21 to 60 years responded to the survey (88.8% response rate). A total of 91 (33.7%) respondents had an adequate knowledge of computers while 108 (40.0%) had fair knowledge and 71(26.3%) of the respondents showed inadequate knowledge. A total of 38(14.1%) were adequately utilizing computers, 14(5.2%) demonstrated average or fair utilization and majority of the respondents 218(80.7%) inadequately utilized computers. Significant predictor variables were average monthly income, job satisfaction index and own computer possession. Conclusions Computer knowledge and utilization habit of health workers were found to be very low. Increasing accessibility to computers and delivering training on the use of computers for workers will increases the knowledge and utilization of computers. This will facilitate the rate of diffusion of the technology to the health sector. Hence, programs targeted at enhancing knowledge and skill of computer use and increasing access to computer should be designed. The association between computer knowledge/skill and health care delivery competence should be studied. PMID:23514191
A review of screening mammography participation and utilization in Canada.
Doyle, G P; Major, D; Chu, C; Stankiewicz, A; Harrison, M L; Pogany, L; Mai, V M; Onysko, J
2011-09-01
Participation rate is an important indicator for a screening program's effectiveness; however, the current approach to measuring participation rate in Canada is not comparable with other countries. The objective of this study is to review the measurement of screening mammography participation in Canada, make international comparisons, and propose alternative methods. Canadian breast cancer screening program data for women aged 50 to 69 years screened between 2004 and 2006 were extracted from the Canadian Breast Cancer Screening Database (CBCSD). The fee-for-services (FSS) mammography data (opportunistic screening mammography) were obtained from the provincial ministries of health. Both screening mammography program participation and utilization were examined over 24 and 30 months. Canada's screening participation rate increases from 39.4% for a 24-month cut-off to 43.6% for a 30-month cut-off. The 24-month mammography utilization rate is 63.1% in Canada, and the 30-month utilization rate is 70.4%. Due to the differences in health service delivery among Canadian provinces, both programmatic participation and overall utilization of mammography at 24 months and 30 months should be monitored.
ERIC Educational Resources Information Center
Walton, Katherine M.; Ingersoll, Brooke R.
2016-01-01
Literature on "Thin Slice" ratings indicates that a number of personality characteristics and behaviors can be accurately predicted by ratings of very short segments (<5?min) of behavior. This study examined the utility of Thin Slice ratings of young children with autism spectrum disorder for predicting developmental skills and…
Lattice Truss Structural Response Using Energy Methods
NASA Technical Reports Server (NTRS)
Kenner, Winfred Scottson
1996-01-01
A deterministic methodology is presented for developing closed-form deflection equations for two-dimensional and three-dimensional lattice structures. Four types of lattice structures are studied: beams, plates, shells and soft lattices. Castigliano's second theorem, which entails the total strain energy of a structure, is utilized to generate highly accurate results. Derived deflection equations provide new insight into the bending and shear behavior of the four types of lattices, in contrast to classic solutions of similar structures. Lattice derivations utilizing kinetic energy are also presented, and used to examine the free vibration response of simple lattice structures. Derivations utilizing finite element theory for unique lattice behavior are also presented and validated using the finite element analysis code EAL.
The development of test methodology for testing glassy materials
NASA Technical Reports Server (NTRS)
Tucker, Dennis S.
1987-01-01
The inherent brittleness of glass invariably leads to a large variability in strength data and a time dependence in strength (i.e., static fatigue). Loading rate plays a large role in strength values. Glass is found to be weaker when supporting loads over long periods as compared to glass which undergoes rapid loading. In this instance the purpose of rapid loading is to fail the glass before any significant crack growth occurs. However, a decrease in strength occurs with a decrease in loading rate, pursuant to substantial crack extension. These properties complicate the structural design allowable for the utilization of glass components in applications such as mirrors for the Space Telescope and AXAF for Spacelab and the space station.
Young adults' health care utilization and expenditures prior to the Affordable Care Act.
Lau, Josephine S; Adams, Sally H; Boscardin, W John; Irwin, Charles E
2014-06-01
To examine young adults' health care utilization and expenditures prior to the Affordable Care Act. We used 2009 Medical Expenditure Panel Survey to (1) compare young adults' health care utilization and expenditures of a full-spectrum of health services to children and adolescents and (2) identify disparities in young adults' utilization and expenditures, based on access (insurance and usual source of care) and other sociodemographic factors, including race/ethnicity and income. Young adults had (1) significantly lower rates of overall utilization (72%) than other age groups (83%-88%, p < .001), (2) the lowest rate of office-based utilization (55% vs. 67%-77%, p < .001) and (3) higher rate of emergency room visits compared with adolescents (15% vs. 12%, p < .01). Uninsured young adults had high out-of-pocket expenses. Compared with the young adults with private insurance, the uninsured spent less than half on health care ($1,040 vs. $2,150/person, p < .001) but essentially the same out-of-pocket expenses ($403 vs. $380/person, p = .57). Among young adults, we identified significant disparities in utilization and expenditures based on the presence/absence of a usual source of care, race/ethnicity, home language, and sex. Young adults may not be utilizing the health care system optimally by having low rates of office-based visits and high rates of emergency room visits. The Affordable Care Act provision of insurance for those previously uninsured or under-insured will likely increase their utilization and expenditures and lower their out-of-pocket expenses. Further effort is needed to address noninsurance barriers and ensure equal access to health services. Copyright © 2014 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.
Young Adults' Health Care Utilization and Expenditures Prior to the Affordable Care Act
Lau, Josephine S.; Adams, Sally H.; Boscardin, W. John; Irwin, Charles E.
2014-01-01
Purpose Examine young adults' health care utilization and expenditures prior to the ACA. Methods We used 2009 Medical Expenditure Panel Survey (MEPS) to 1) compare young adults' health care utilization and expenditures of a full-spectrum of health services to children and adolescents and 2) identify disparities in young adults' utilization and expenditures, based on access (insurance and usual source of care) and other socio-demographic factors, including race/ethnicity and income. Results Young adults had: 1) significantly lower rates of overall utilization (72%) than other age groups (83-88%, P<.001) and 2), the lowest rate of office-based utilization (55% vs. 67-77%, P<.001) and higher rate of ER visits compared to adolescents (15% v. 12%, P<.01). Uninsured young adults had high out-of-pocket expenses. Compared to the young adults with private insurance, the uninsured spent less than half on health care ($1,040 vs. $2,150/ person, P<.001), but essentially the same out-of-pocket expenses ($403 vs. $380/person, p =.57). Among young adults, we identified significant disparities in utilization and expenditures based on the presence/absence of a usual source of care, race/ethnicity, home language and sex. Conclusions Young adults may not be utilizing the health care system optimally by having low rates of office-based visits and high rates of ER visits. The ACA provision of insurance for those previously uninsured or under-insured will likely increase their utilization and expenditures and lower their out-of-pocket expenses. Further effort is needed to address non-insurance barriers and ensure equal access to health services. PMID:24702839
Hölttä, Teemu; Lintunen, Anna; Chan, Tommy; Mäkelä, Annikki; Nikinmaa, Eero
2017-07-01
Trees must simultaneously balance their CO2 uptake rate via stomata, photosynthesis, the transport rate of sugars and rate of sugar utilization in sinks while maintaining a favourable water and carbon balance. We demonstrate using a numerical model that it is possible to understand stomatal functioning from the viewpoint of maximizing the simultaneous photosynthetic production, phloem transport and sink sugar utilization rate under the limitation that the transpiration-driven hydrostatic pressure gradient sets for those processes. A key feature in our model is that non-stomatal limitations to photosynthesis increase with decreasing leaf water potential and/or increasing leaf sugar concentration and are thus coupled to stomatal conductance. Maximizing the photosynthetic production rate using a numerical steady-state model leads to stomatal behaviour that is able to reproduce the well-known trends of stomatal behaviour in response to, e.g., light, vapour concentration difference, ambient CO2 concentration, soil water status, sink strength and xylem and phloem hydraulic conductance. We show that our results for stomatal behaviour are very similar to the solutions given by the earlier models of stomatal conductance derived solely from gas exchange considerations. Our modelling results also demonstrate how the 'marginal cost of water' in the unified stomatal conductance model and the optimal stomatal model could be related to plant structural and physiological traits, most importantly, the soil-to-leaf hydraulic conductance and soil moisture. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
Radiative energy transfer from MoS2 excitons to surface plasmons
NASA Astrophysics Data System (ADS)
Kang, Yimin; Li, Bowen; Fang, Zheyu
2017-12-01
In this work, we demonstrated the energy transfer process from few-layer MoS2 to gold dimer arrays via ultrafast pump-probe spectroscopy. With the overlap between the MoS2 exciton and the designed plasmon dipolar modes in the frequency domain, the exciton energy can be radiatively transferred to plasmonic structures, excited the localized surface plasmon resonance, and then enhanced the oscillation of coherent acoustic phonons. Power-dependent differential reflection signals and an analytical model based on the rate equation of exciton density were carried out to quantitatively study the energy transfer process. Our finding explores the energy flow between MoS2 excitons and surface plasmons, and can be contributed to the design of exciton-plasmon structures utilizing ultrathin materials.
White OLED devices and processes for lighting applications
NASA Astrophysics Data System (ADS)
Ide, Nobuhiro; Tsuji, Hiroya; Ito, Norihiro; Matsuhisa, Yuko; Houzumi, Shingo; Nishimori, Taisuke
2010-05-01
In these days, the basic performances of white OLEDs are dramatically improved and application of OLEDs to "Lighting" is expected to be true in the near future. We have developed various technologies for OLED lighting with the aid of the Japanese governmental project, "High-efficiency lighting based on the organic light-emitting mechanism." In this project, a white OLED with high efficiency (37 lm/W) and high quality emission characteristics (CRI of 95 with a small variation of chromaticity in different directions and chromaticity just on the black-body radiation curve) applicable to "Lighting" was realized by a two-unit structure with a fluorescent deep blue emissive unit and a phosphorescent green and red emissive unit. Half-decay lifetime of this white OLED at 1,000 cd/m2 was over 40,000 h. A heat radiative, thin encapsulation structure (less than 1 mm) realized a very stable emission at high luminance of over 3,000 cd/m2. A new deposition source with a hot-wall and a rate controllable valve was developed. Thickness uniformity within +/- 3% at high deposition rate of over 8 nm/s, high material utilization of over 70 %, and repeatable deposition rate controllability were confirmed.
In situ spectroscopic and solution analyses of the reductive dissolution of Mn02 by Fe(II)
Villinski, John E.; O'Day, Peggy A.; Corley, Timothy L.; Conklin, Martha H.
2001-01-01
The reductive dissolution of MnO2 by Fe(II) under conditions simulating acid mine drainage (pH 3, 100 mM SO42-) was investigated by utilizing a flow-through reaction cell and synchrotron X-ray absorption spectroscopy. This configuration allows collection of in situ, real-time X-ray absorption near-edge structure (XANES) spectra and bulk solution samples. Analysis of the solution chemistry suggests that the reaction mechanism changed (decreased reaction rate) as MnO2 was reduced and Fe(III) precipitated, primarily as ferrihydrite. Simultaneously, we observed an additional phase, with the local structure of jacobsite (MnFe2O4), in the Mn XANES spectra of reactants and products. The X-ray absorbance of this intermediate phase increased during the experiment, implying an increase in concentration. The presence of this phase, which probably formed as a surface coating, helps to explain the reduced rate of dissolution of manganese(IV) oxide. In natural environments affected by acid mine drainage, the formation of complex intermediate solid phases on mineral surfaces undergoing reductive dissolution may likewise influence the rate of release of metals to solution.
Gao, Jianmin; Zhou, Zhongliang; Yan, Ju’e; Xu, Yongjian; Yang, Xiaowei; Li, Yanli
2017-01-01
Objective This study sought to examine the sources of inequity in health examination service utilization by women from underdeveloped areas in western China. Methods Based on data from the 5th National Health Service Survey in Shaanxi province, women’s utilization of health examination services was examined according to gynecological, cervical smear, and breast examination rates. The equity of health examination service utilization by 15- to 64-year-old women and the factors contributing to inequity were determined using the health concentration index, decomposition of the concentration index, and the horizontal inequity index. Results The examination rates for gynecological, cervical smear, and breast exams for 15- to 64-year-old women in Shaanxi province were 40.61%, 27.08%, and 24.59%, respectively. The horizontal inequity indices of gynecological, cervical smear, and breast examination rates were 0.0480, 0.0423, and 0.0764, respectively, and each examination rate was higher for wealthy individuals. The contribution rates of economic status to the inequalities in gynecological, cervical smear, and breast examination rates were 65.80%, 74.31%, and 56.49%, respectively. The contribution rates of educational status to the inequalities in gynecological, cervical smear, and breast examination rates were 21.01%, 14.83% and 30.00%, respectively. The contribution rates of age to the inequalities in gynecological, cervical smear, and breast examination rates were 25.77%, 26.55%, and 18.40%, respectively. Conclusions Women’s health examination rates differed between populations with different socio-demographic characteristics. There is pro-wealth inequality in each examination rate. This study found that financial status, age, and education level were the main reasons for the unequal utilization of health examination services. PMID:29065129
Fairman, K A
2000-05-01
To provide basic information about 2 factors contributing to rising prescription drug costs--utilization trends and product selection. Prescription drug costs have risen sharply in recent years, and continued growth is expected. There is little consensus about appropriate cost-management strategies, in part because quantitative data on the causes and implications of increased drug costs are lacking. This study followed 463,820 continuously enrolled adult (> or = 18 years of age on January 1, 1996) utilizers of 15 chronic or seasonal therapeutic classes for 2.5 years (January 1996 through June 1998) using a pharmacy benefit manager's multiple-payer claims database. Outcome measures included (1) change in utilization rate, (2) relationship between new use and utilization growth, (3) stability of the treated population (ie, mostly long-term use vs high rates of turnover), and (4) product mix changes (ie, cost per dispensed day for 1996 vs 1997 and for new vs continuing users, controlling for inflation). Of the 463,820 utilizers, 97% were commercially insured and 3% enrolled in Medicare risk plans; 40% were enrolled in managed care and the remainder covered by indemnity insurance. Rates of growth and turnover varied substantially by class. The highest 2-year utilization rate change was 66.7% for antihyperlipidemic agents; change was < 10% in only 3 classes. Across classes, an average of 38.7% of 1997 users were new (ie, no use in 1996) and an average of 34.0% of 1996 users were dropouts (ie, no use in 1997). Utilization growth depended heavily on treatment continuation; classes with high dropout rates (eg, antirheumatic, antiasthmatic) did not have high growth rates, even with high rates of new use. In most classes, costs were not higher for new than for continuing users. In some classes, however (eg, antipsychotic, antidiabetic), both new and continuing users increased their use of newer, more expensive products. Because factors underlying rising prescription drug costs vary by therapeutic class, cost-containment strategies should address these differences. Further research is needed to assess the clinical and economic costs and benefits of rapid growth in the utilization of certain therapeutic classes.
Recovery of Utility Fixed Costs: Utility, Consumer, Environmental and Economist Perspectives
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wood, Lisa; Hemphill, Ross; Howat, John
Utilities recover costs for providing electric service to retail customers through a combination of rate components that together comprise customers’ monthly electric bills. Rates and rate designs are set by state regulators and vary by jurisdiction, utility and customer class. In addition to the fundamental tenet of setting fair and reasonable rates, rate design balances economic efficiency, equity and fairness, customer satisfaction, utility revenue stability, and customer price and bill stability.1 At the most basic level, retail electricity bills in the United States typically include a fixed monthly customer charge — a set dollar amount regardless of energy usage —more » and a volumetric energy charge for each kilowatt-hour consumed.2 The energy charge may be flat across all hours, vary by usage level (for example, higher rates at higher levels of usage), or vary based on time of consumption.3 While some utility costs, such as fuel costs, clearly vary according to electricity usage, other costs are “fixed” over the short run — generally, those that do not vary over the course of a year. Depending on your point of view, and whether the state’s electricity industry has been restructured or remains vertically integrated, the set of costs that are “fixed” may be quite limited. Or the set may extend to all capacity costs for generation, transmission and distribution. In the long run, all costs are variable. In the context of flat or declining loads in some regions, utilities are proposing a variety of changes to retail rate designs, particularly for residential customers, to recover fixed costs. In this report, authors representing utility (Chapter 1), consumer (Chapter 2), environmentalist (Chapter 3) and economist (Chapter 4) perspectives discuss fixed costs for electric utilities and set out their principles for recovering those costs. The table on the next page summarizes each author’s relative preferences for various options for fixed cost recovery, some of which may be used in combination.4 The specific design of any ratemaking option matters crucially, so a general preference for a given option does not indicate support for any particular application.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fang, Yi; Liu, Fang; Lester, Marsha I., E-mail: milester@sas.upenn.edu
2016-07-28
The unimolecular decay of carbonyl oxide intermediates, known as Criegee intermediates, produced in alkene ozonolysis is a significant source of OH radicals in the troposphere. Here, the rate of appearance of OH radical products is examined directly in the time-domain for a prototypical alkyl-substituted Criegee intermediate, CH{sub 3}CH{sub 2}CHOO, following vibrational activation under collision-free conditions. Complementary statistical Rice–Ramsperger–Kassel–Marcus calculations of the microcanonical unimolecular decay rate for CH{sub 3}CH{sub 2}CHOO are also carried out at energies in the vicinity of the barrier for 1,4 hydrogen atom transfer that leads to OH products. Tunneling through the barrier, derived from high level electronicmore » structure calculations, contributes significantly to the decay rate. Infrared transitions of CH{sub 3}CH{sub 2}CHOO are identified in the CH stretch overtone region, which are detected by ultraviolet laser-induced fluorescence of the resultant OH products. The features observed are attributed to CH vibrational excitations and conformational forms utilizing insights from theory. Both experiment and theory yield unimolecular decay rates for CH{sub 3}CH{sub 2}CHOO of ca. 10{sup 7} s{sup −1}, which are slower than those obtained for syn-CH{sub 3}CHOO or (CH{sub 3}){sub 2}COO reported previously [Fang et al., J. Chem. Phys. 144, 061102 (2016)] at similar energies. Master equation modeling is also utilized to predict the thermal decay rate of CH{sub 3}CH{sub 2}CHOO under atmospheric conditions, giving a rate of 279 s{sup −1} at 298 K.« less
Guevara-Oquendo, Víctor H; Zhang, Huihua; Yu, Peiqiang
2018-04-13
To date, advanced synchrotron-based and globar-sourced techniques are almost unknown to food and feed scientists. There has been little application of these advanced techniques to study blend pellet products at a molecular level. This article aims to provide recent research on advanced synchrotron and globar vibrational molecular spectroscopy contributions to advances in blend pellet products research on molecular structure and molecular nutrition interaction. How processing induced molecular structure changes in relation to nutrient availability and utilization of the blend pellet products. The study reviews Utilization of co-product components for blend pellet product in North America; Utilization and benefits of inclusion of pulse screenings; Utilization of additives in blend pellet products; Application of pellet processing in blend pellet products; Conventional evaluation techniques and methods for blend pellet products. The study focus on recent applications of cutting-edge vibrational molecular spectroscopy for molecular structure and molecular structure association with nutrient utilization in blend pellet products. The information described in this article gives better insight on how advanced molecular (micro)spectroscopy contributions to advances in blend pellet products research on molecular structure and molecular nutrition interaction.
Determination of motion extrema in multi-satellite systems
NASA Astrophysics Data System (ADS)
Allgeier, Shawn E.
Spacecraft, or satellite formation flight has been a topic of interest dating back to the Gemini program of the 1960s. Traditionally space missions have been designed around large monolithic assets. Recent interest in low cost, rapid call up mission architectures structured around fractionated systems, small satellites, and constellations has spurred renewed efforts in spacecraft relative motion problems. While such fractionated, or multi-body systems may provide benefits in terms of risk mitigation and cost savings, they introduce new technical challenges in terms of satellite coordination. Characterization of satellite formations is a vital requirement for them to have utility to industry and government entities. Satellite formations introduce challenges in the form of constellation maintenance, inter-satellite communications, and the demand for more sophisticated guidance, navigation, and control systems. At the core of these challenges is the orbital mechanics which govern the resulting motion. New applications of algebraic techniques are applied to the formation flight problem, specifically Gröbner basis tools, as a means of determining extrema of certain quantities pertaining to formation flight. Specifically, bounds are calculated for the relative position components, relative speed, relative velocity components, and range rate. The position based metrics are relevant for planning formation geometry, particularly in constellation or Earth observation applications. The velocity metrics are relevant in the design of end game interactions for rendezvous and proximity operations. The range rate of one satellite to another is essential in the design of radio frequency hardware for inter-satellite communications so that the doppler shift can be calculated a priori. Range rate may also have utility in space based surveillance and space situational awareness concerns, such as cross tagging. The results presented constitute a geometric perspective and have utility to mission designers, particularly for missions involving rendezvous and proximity operations.
Regional differences of maternal health care utilization in China.
Tang, Mengsha; Wang, Debin; Hu, Hong; Wang, Guoping; Li, Rongjie
2015-03-01
To describe regional differences in maternal health care (MHC) utilization in China. Cross-sectional comparisons of 4 MHC utilization indicators, namely, early (13 weeks within pregnancy) examinations rate (EER), prenatal examination (>4 times) rate (PER), hospital delivery rate (HDR), and postnatal visit (>1 time) rate (PVR), using index of dissimilarity (ID), linear correlation analysis, and geographical mapping. Significant differences existed across regions in all the indicators (P < .01). All the IDs for rural areas were higher than that for urban areas. The IDs for major regions ranged from 0.01 to 0.27. Linear correlation coefficients between MHC utilization indicators by regions varied from 0.007 to 0.889 (in absolute value, P < .05). Characteristic formats of geographical distribution were found with PER, EER, HDR, and PVR being in "high-plateau," "low-plateau," and "shifting" patterns, respectively. There exist substantial regional discrepancies in MHC utilization in China and future MHC-related policies should take account regional context. © 2013 APJPH.
Electric utility companies and geothermal power
NASA Technical Reports Server (NTRS)
Pivirotto, D. S.
1976-01-01
The requirements of the electric utility industry as the primary potential market for geothermal energy are analyzed, based on a series of structured interviews with utility companies and financial institution executives. The interviews were designed to determine what information and technologies would be required before utilities would make investment decisions in favor of geothermal energy, the time frame in which the information and technologies would have to be available, and the influence of the governmental politics. The paper describes the geothermal resources, electric utility industry, its structure, the forces influencing utility companies, and their relationship to geothermal energy. A strategy for federal stimulation of utility investment in geothermal energy is suggested. Possibilities are discussed for stimulating utility investment through financial incentives, amelioration of institutional barriers, and technological improvements.
1981-06-01
available information from Public Utilities comaissions responsible for establishing PURPA rates in each state. 1.4 PRINCIPAL FINDINGS The direct effect all... PURPA rates. However, many of those categorized as private and public developers are private and public utilities. This reflects the interest in hydro...The Public Utility Regulatory Policies Act ( PURPA ) of 1978 empowered FERC to prescribe rules requiring utilities to purchase power from and sell power
Horný, Michal; Morgan, Jake R; Merker, Vanessa L
2015-12-01
To quantify changes in private insurance payments for and utilization of abdominal/pelvic computed tomography scans (CTs) after 2011 changes in CPT coding and Medicare reimbursement rates, which were designed to reduce costs stemming from misvalued procedures. TruvenHealth Analytics MarketScan Commercial Claims and Encounters database. We used difference-in-differences models to compare combined CTs of the abdomen/pelvis to CTs of the abdomen or pelvis only. Our main outcomes were inflation-adjusted log payments per procedure, daily utilization rates, and total annual payments. Claims data were extracted for all abdominal/pelvic CTs performed in 2009-2011 within noncapitated, employer-sponsored private plans. Adjusted payments per combined CTs of the abdomen/pelvis dropped by 23.8 percent (p < .0001), and their adjusted daily utilization rate accelerated by 0.36 percent (p = .034) per month after January 2011. Utilization rate of abdominal-only or pelvic-only CTs dropped by 5.0 percent (p < .0001). Total annual payments for combined CTs of the abdomen/pelvis decreased in 2011 despite the increased utilization. Private insurance payments for combined CTs of the abdomen/pelvis declined and utilization accelerated significantly after 2011 policy changes. While growth in total annual payments was contained in 2011, it may not be sustained if 2011 utilization trends persist. © Health Research and Educational Trust.
McKernan, Susan C.; Kuthy, Raymond A.; Momany, Elizabeth T.; McQuistan, Michelle R.; Hanley, Paul F.; Jones, Michael P.; Damiano, Peter C.
2014-01-01
Objectives To describe rates of Medicaid-funded services provided by orthodontists in Iowa to children and adolescents, identify factors associated with utilization, and describe geographic barriers to care. Methods We analyzed enrollment and claims data from the Iowa Medicaid program for a 3-year period, January 2008 through December 2010. Descriptive, bivariate, and multivariable logistic regression analyses were performed with utilization of orthodontic services as the main outcome variable. Service areas were identified by small area analysis in order to examine regional variability in utilization. Results The overall rate of orthodontic utilization was 3.1 percent. Medicaid enrollees living in small towns and rural areas were more likely to utilize orthodontic services than those living in urban areas. Children who had an oral evaluation by a primary care provider in the year prior to the study period were more likely to receive orthodontic services. Service areas with lower population density and greater mean travel distance to participating orthodontists had higher utilization rates than smaller, more densely populated areas. Conclusions Rural residency and increased travel distances do not appear to act as barriers to orthodontic care for this population. The wide variability of utilization rates seen across service areas may be related to workforce supply in the form of orthodontists who accept Medicaid-insured patients. Referrals to orthodontists from primary care dentists may improve access to specialty care for Medicaid enrollees. PMID:23289856
24 CFR 990.185 - Utilities expense level: Incentives for energy conservation/rate reduction.
Code of Federal Regulations, 2012 CFR
2012-04-01
... the energy conservation measures and other direct costs related to the energy project under the... for energy conservation/rate reduction. 990.185 Section 990.185 Housing and Urban Development... Calculating Formula Expenses § 990.185 Utilities expense level: Incentives for energy conservation/rate...
24 CFR 990.185 - Utilities expense level: Incentives for energy conservation/rate reduction.
Code of Federal Regulations, 2013 CFR
2013-04-01
... the energy conservation measures and other direct costs related to the energy project under the... for energy conservation/rate reduction. 990.185 Section 990.185 Housing and Urban Development... Calculating Formula Expenses § 990.185 Utilities expense level: Incentives for energy conservation/rate...
24 CFR 990.185 - Utilities expense level: Incentives for energy conservation/rate reduction.
Code of Federal Regulations, 2014 CFR
2014-04-01
... the energy conservation measures and other direct costs related to the energy project under the... for energy conservation/rate reduction. 990.185 Section 990.185 Housing and Urban Development... Calculating Formula Expenses § 990.185 Utilities expense level: Incentives for energy conservation/rate...
Reading Ability and the Utilization of Orthographic Structure in Reading. Technical Report No. 515.
ERIC Educational Resources Information Center
Massaro, Dominic W.; Taylor, Glen A.
Previous research has demonstrated that readers utilize orthographic structure in their perceptual recognition of letter strings. Two experiments were conducted to assess whether this utilization varied with reading ability. Anagrams of words were made to create strings that orthogonally combined high and low single letter positional frequency and…
Prepreg effects on honeycomb composite manufacturing
NASA Astrophysics Data System (ADS)
Martin, Cary Joseph
Fiber reinforced composites offer many advantages over traditional materials and are widely utilized in aerospace applications. Advantages include a high stiffness to weight ratio and excellent fatigue resistance. However, the pace of new implementation is slow. The manufacturing processes used to transform composite intermediates into final products are poorly understood and are a source of much variability. This limits new implementation and increases the manufacturing costs of existing designs. One such problem is honeycomb core crush, in which a core-stiffened structure collapses during autoclave manufacture, making the structure unusable and increasing the overall manufacturing cost through increased scrap rates. Consequently, the major goal of this research was to investigate the scaling of core crush from prepreg process-structure-property relations to commercial composite manufacture. The material dependent nature of this defect was of particular interest. A methodology and apparatus were developed to measure the frictional resistance of prepreg materials under typical processing conditions. Through a characterization of commercial and experimental prepregs, it was found that core crush behavior was the result of differences in prepreg frictional resistance. This frictional resistance was related to prepreg morphology and matrix rheology and elasticity. Resin composition and prepreg manufacturing conditions were also found to affect manufacturing behavior. Mechanical and dimensional models were developed and demonstrated utility for predicting this crushing behavior. Collectively, this work explored and identified the process-structure-property relations as they relate to the manufacture of composite materials and suggested several avenues by which manufacturing-robust materials may be developed.
Murray, Louis C.
2009-01-01
Water-use data collected between 1992 and 2006 at eight municipal water-supply utilities in east-central and northeast Florida were analyzed to identify seasonal trends in use and to quantify monthly variations. Regression analyses were applied to identify significant correlations between water use and selected meteorological parameters and drought indices. Selected parameters and indices include precipitation (P), air temperature (T), potential evapotranspiration (PET), available water (P-PET), monthly changes in these parameters (Delta P, Delta T, Delta PET, Delta(P-PET), the Palmer Drought Severity Index (PDSI), and the Standardized Precipitation Index (SPI). Selected utilities include the City of Daytona Beach (Daytona), the City of Eustis (Eustis), Gainesville Regional Utilities (GRU), Jacksonville Electric Authority (JEA), Orange County Utilities (OCU), Orlando Utilities Commission (OUC), Seminole County Utilities (SCU), and the City of St. Augustine (St. Augustine). Water-use rates at these utilities in 2006 ranged from about 3.2 million gallons per day at Eustis to about 131 million gallons per day at JEA. Total water-use rates increased at all utilities throughout the 15-year period of record, ranging from about 4 percent at Daytona to greater than 200 percent at OCU and SCU. Metered rates, however, decreased at six of the eight utilities, ranging from about 2 percent at OCU and OUC to about 17 percent at Eustis. Decreases in metered rates occurred because the number of metered connections increased at a greater rate than did total water use, suggesting that factors other than just population growth may play important roles in water-use dynamics. Given the absence of a concurrent trend in precipitation, these decreases can likely be attributed to changes in non-climatic factors such as water-use type, usage of reclaimed water, water-use restrictions, demographics, and so forth. When averaged for the eight utilities, metered water-use rates depict a clear seasonal pattern in which rates were lowest in the winter and greatest in the late spring. Averaged water-use rates ranged from about 9 percent below the 15-year daily mean in January to about 11 percent above the daily mean in May. Water-use rates were found to be statistically correlated to meteorological parameters and drought indices, and to be influenced by system memory. Metered rates (in gallons per day per active metered connection) were consistently found to be influenced by P, T, PET, and P-PET and changes in these parameters that occurred in prior months. In the single-variant analyses, best correlations were obtained by fitting polynomial functions to plots of metered rates versus moving-averaged values of selected parameters (R2 values greater than 0.50 at three of eight sites). Overall, metered water-use rates were best correlated with the 3- to 4-month moving average of Delta T or Delta PET (R2 values up to 0.66), whereas the full suite of meteorological parameters was best correlated with metered rates at Daytona and least correlated with rates at St. Augustine. Similarly, metered rates were substantially better correlated with moving-averaged values of precipitation (significant at all eight sites) than with single (current) monthly values (significant at only three sites). Total and metered water-use rates were positively correlated with T, PET, Delta P, Delta T, and Delta PET, and negatively correlated with P, P-PET, Delta (P-PET), PDSI, and SPI. The drought indices were better correlated with total water-use rates than with metered rates, whereas metered rates were better correlated with meteorological parameters. Multivariant analyses produced fits of the data that explained a greater degree of the variance in metered rates than did the single-variant analyses. Adjusted R2 values for the 'best' models ranged from 0.79 at JEA to 0.29 at St. Augustine and exceeded 0.60 at five of eight sites. The amount of available water (P-PET) was the si
Development of image processing techniques for applications in flow visualization and analysis
NASA Technical Reports Server (NTRS)
Disimile, Peter J.; Shoe, Bridget; Toy, Norman; Savory, Eric; Tahouri, Bahman
1991-01-01
A comparison between two flow visualization studies of an axi-symmetric circular jet issuing into still fluid, using two different experimental techniques, is described. In the first case laser induced fluorescence is used to visualize the flow structure, whilst smoke is utilized in the second. Quantitative information was obtained from these visualized flow regimes using two different digital imaging systems. Results are presented of the rate at which the jet expands in the downstream direction and these compare favorably with the more established data.
The workload book: Assessment of operator workload to engineering systems
NASA Technical Reports Server (NTRS)
Gopher, D.
1983-01-01
The structure and initial work performed toward the creation of a handbook for workload analysis directed at the operational community of engineers and human factors psychologists are described. The goal, when complete, will be to make accessible to such individuals the results of theoretically-based research that are of practical interest and utility in the analysis and prediction of operator workload in advanced and existing systems. In addition, the results of laboratory study focused on the development of a subjective rating technique for workload that is based on psychophysical scaling techniques are described.
Green Synthesis of Silver Nanoparticles Decorated by Fe₃O₄/GO with Enhanced Catalytic Activity.
Guo, Jian; Wang, Yu; Liu, Dan-Dan; Wan, Rong; Han, Guo-Zhi
2018-05-01
We report a simple and green approach to synthesize stable water-dispersible silver nanoparticles decorated by magnetic Fe3O4 and graphene oxide (GO). These results of UV-Vis spectra, along with TEM and SEM indicated that the water-dispersible silver nanoparticles had cluster flat structure and retained the optical properties of the original silver particle. Combining the advantages of Fe3O4 and GO, the composite nanoparticles showed enhanced catalytic activity with good recycling utilization rate by magnetic separation.
Vibration suppression of planar truss structures utilizing uniform damping control
NASA Technical Reports Server (NTRS)
Andersen, G. C.; Silverberg, L. M.
1986-01-01
A variety of methods has been devised for vibrational control of a structure using both passive and active controls. Presented in this paper is a relatively new method for vibration suppression, uniform damping control. This method consists of implementing a control law which tends to dampen each vibrational mode of the structure at the same desirable exponential rate. The unique aspects of this method are that the control law is not explicitly dependent on the structural stiffness, the control forces are directly proportional to the distribution of the structural mass, and the control law is natural and decentralized. The control law was applied to a flexible planar truss structure and the various aspects of implementation of the control law examined are: actuator/sensor number, placement, and the impact of the actuator/sensor number and placement on the necessary control 'power' requirements such as peak power loads, total power requirements, etc. Also examined are the effects of using a limited number of active members in terms of the vibrational performance when compared with the 'ideal' distributed control law.
The clinical use of structural MRI in Alzheimer disease
Frisoni, Giovanni B.; Fox, Nick C.; Jack, Clifford R.; Scheltens, Philip; Thompson, Paul M.
2010-01-01
Structural imaging based on magnetic resonance is an integral part of the clinical assessment of patients with suspected Alzheimer dementia. Prospective data on the natural history of change in structural markers from preclinical to overt stages of Alzheimer disease are radically changing how the disease is conceptualized, and will influence its future diagnosis and treatment. Atrophy of medial temporal structures is now considered to be a valid diagnostic marker at the mild cognitive impairment stage. Structural imaging is also included in diagnostic criteria for the most prevalent non-Alzheimer dementias, reflecting its value in differential diagnosis. In addition, rates of whole-brain and hippocampal atrophy are sensitive markers of neurodegeneration, and are increasingly used as outcome measures in trials of potentially disease-modifying therapies. Large multicenter studies are currently investigating the value of other imaging and nonimaging markers as adjuncts to clinical assessment in diagnosis and monitoring of progression. The utility of structural imaging and other markers will be increased by standardization of acquisition and analysis methods, and by development of robust algorithms for automated assessment. PMID:20139996
Disadvantaged persons' participation in health promotion projects: some structural dimensions.
Boyce, W F
2001-05-01
A structural perspective was used in studying community participation of disadvantaged groups (poor women, street youth, and disabled persons) in health promotion projects. Five community projects in the Canadian Health Promotion Contribution Program were examined in a comparative case study utilizing in-depth interviews, documents, and secondary sources. Analysis revealed relatively low numbers and restricted range of participants, difficulties in recruiting and maintaining participants, declining rates of active participation over time, and limited target group influence and power. This paper reports on the relationship between various dimensions of structure (social-cultural, organizational, political-legal-economic) and the community participation process. Participation was influenced by structural factors such as bureaucratic rules and regulators, perceived minority group rights and relations, agency reputations and responsibilities, available resources, and organizational roles. Control of projects by target group members, rather than by service agencies, was an important overall organizational structural factor which allowed community members to achieve influence in projects. The study concludes that a conceptual model based on structural factors is useful in explaining how key factors from federal and local levels can restrict or facilitate the community participation process.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ruth, Mark; Pratt, Annabelle; Lunacek, Monte
2015-07-17
The combination of distributed energy resources (DER) and retail tariff structures to provide benefits to both utility consumers and the utilities is poorly understood. To improve understanding, an Integrated Energy System Model (IESM) is being developed to simulate the physical and economic aspects of DER technologies, the buildings where they reside, and feeders servicing them. The IESM was used to simulate 20 houses with home energy management systems on a single feeder under a time of use tariff to estimate economic and physical impacts on both the households and the distribution utilities. HEMS reduce consumers’ electric bills by precooling housesmore » in the hours before peak electricity pricing. Household savings are greater than the reduction utility net revenue indicating that HEMS can provide a societal benefit providing tariffs are structured so that utilities remain solvent. Utilization of HEMS reduce peak loads during high price hours but shifts it to hours with off-peak and shoulder prices and resulting in a higher peak load.« less
Multi-label literature classification based on the Gene Ontology graph.
Jin, Bo; Muller, Brian; Zhai, Chengxiang; Lu, Xinghua
2008-12-08
The Gene Ontology is a controlled vocabulary for representing knowledge related to genes and proteins in a computable form. The current effort of manually annotating proteins with the Gene Ontology is outpaced by the rate of accumulation of biomedical knowledge in literature, which urges the development of text mining approaches to facilitate the process by automatically extracting the Gene Ontology annotation from literature. The task is usually cast as a text classification problem, and contemporary methods are confronted with unbalanced training data and the difficulties associated with multi-label classification. In this research, we investigated the methods of enhancing automatic multi-label classification of biomedical literature by utilizing the structure of the Gene Ontology graph. We have studied three graph-based multi-label classification algorithms, including a novel stochastic algorithm and two top-down hierarchical classification methods for multi-label literature classification. We systematically evaluated and compared these graph-based classification algorithms to a conventional flat multi-label algorithm. The results indicate that, through utilizing the information from the structure of the Gene Ontology graph, the graph-based multi-label classification methods can significantly improve predictions of the Gene Ontology terms implied by the analyzed text. Furthermore, the graph-based multi-label classifiers are capable of suggesting Gene Ontology annotations (to curators) that are closely related to the true annotations even if they fail to predict the true ones directly. A software package implementing the studied algorithms is available for the research community. Through utilizing the information from the structure of the Gene Ontology graph, the graph-based multi-label classification methods have better potential than the conventional flat multi-label classification approach to facilitate protein annotation based on the literature.
Kearns, Patrick
2017-10-01
PURPOSE: Health services research evaluates redesign models for primary care. Care management is one alternative. Evaluation includes resource utilization as a criterion. Compare the impact of care-manager teams on resource utilization. The comparison includes entire panes of patients and the subset of patients with diabetes. DESIGN: Randomized, prospective, cohort study comparing change in utilization rates between groups, pre- and post-intervention. METHODOLOGY: Ten primary care physician panels in a safety-net setting. Ten physicians were randomized to either a care-management approach (Group 1) or a traditional approach (Group 2). Care managers focused on diabetes and the cardiovascular cluster of diseases. Analysis compared rates of hospitalization, 30-day readmission, emergency room visits, and urgent care visits. Analysis compared baseline rates to annual rates after a yearlong run-in for entire panels and the subset of patients with diabetes. RESULTS: Resource utilization showed no statistically significant change between baseline and Year 3 (P=.79). Emergency room visits and hospital readmission increased for both groups (P=.90), while hospital admissions and urgent care visits decreased (P=.73). Similarly, utilization was not significantly different for patients with diabetes (P=.69). CONCLUSIONS: A care-management team approach failed to improve resource utilization rates by entire panels and the subset of diabetic patients compared to traditional care. This reinforces the need for further evidentiary support for the care-management model's hypothesis in the safety net.
Optical fiber repeatered transmission systems utilizing SAW filters
NASA Astrophysics Data System (ADS)
Rosenberg, R. L.; Ross, D. G.; Trischitta, P. R.; Fishman, D. A.; Armitage, C. B.
1983-05-01
Baseband digital transmission-line systems capable of signaling rates of several hundred to several thousand Mbit/s are presently being developed around the world. The pulse regeneration process is gated by a timing wave which is synchronous with the symbol rate of the arriving pulse stream. Synchronization is achieved by extracting a timing wave from the arriving pulse stream, itself. To date, surface acoustic-wave (SAW) filters have been widely adopted for timing recovery in the in-line regenerators of high-bit-rate systems. The present investigation has the objective to acquaint the SAW community in general, and SAW filter suppliers in particular, with the requirements for timing recovery filters in repeatered digital transmission systems. Attention is given to the system structure, the timing loop function, the system requirements affecting the timing-recovery filter, the decision process, timing jitter accumulation, the filter 'ringing' requirement, and aspects of reliability.
NASA Astrophysics Data System (ADS)
Gao, Zhuo; Zhan, Weida; Sun, Quan; Hao, Ziqiang
2018-04-01
Differential multi-pulse position modulation (DMPPM) is a new type of modulation technology. There is a fast transmission rate, high bandwidth utilization, high modulation rate characteristics. The study of DMPPM modulation has important scientific value and practical significance. Channel capacity is one of the important indexes to measure the communication capability of communication system, and studying the channel capacity of DMPPM without background noise is the key to analyze the characteristics of DMPPM. The DMPPM theoretical model is established. The symbol structure of DMPPM with guard time slot is analyzed, and the channel capacity expression of DMPPM is deduced. Simulation analysis by MATLAB. The curves of unit channel capacity and capacity efficiency at different pulse and photon counting rates are analyzed. The results show that DMPPM is more advantageous than multi-pulse position modulation (MPPM), and is more suitable for future wireless optical communication system.
Optimizing ultrafast illumination for multiphoton-excited fluorescence imaging
Stoltzfus, Caleb R.; Rebane, Aleksander
2016-01-01
We study the optimal conditions for high throughput two-photon excited fluorescence (2PEF) and three-photon excited fluorescence (3PEF) imaging using femtosecond lasers. We derive relations that allow maximization of the rate of imaging depending on the average power, pulse repetition rate, and noise characteristics of the laser, as well as on the size and structure of the sample. We perform our analysis using ~100 MHz, ~1 MHz and 1 kHz pulse rates and using both a tightly-focused illumination beam with diffraction-limited image resolution, as well loosely focused illumination with a relatively low image resolution, where the latter utilizes separate illumination and fluorescence detection beam paths. Our theoretical estimates agree with the experiments, which makes our approach especially useful for optimizing high throughput imaging of large samples with a field-of-view up to 10x10 cm2. PMID:27231620
Westermann, Fabian L; McPherson, Iain S; Jones, Tappey H; Milicich, Lesley; Lester, Philip J
2015-08-01
Toxicity and the utilization of venom are essential features in the ecology of many animal species and have been hypothesized to be important factors contributing to the assembly of communities through competitive interactions. Ants of the genus Monomorium utilize a variety of venom compositions, which have been reported to give them a competitive advantage. Here, we investigate two pairs of Monomorium species, which differ in the structural compositions of their venom and their co-occurrence patterns with the invasive Argentine ant. We looked at the effects of Monomorium venom toxicity, venom utilization, and aggressive physical interactions on Monomorium and Argentine ant survival rates during arena trials. The venom toxicity of the two species co-occurring with the invasive Argentine ants was found to be significantly higher than the toxicity of the two species which do not. There was no correlation between venom toxicity and Monomorium survival; however, three of the four Monomorium species displayed significant variability in their venom usage which was associated with the number of Argentine ant workers encountered during trials. Average Monomorium mortality varied significantly between species, and in Monomorium smithii and Monomorium antipodum, aggressive interactions with Argentine ants had a significant negative effect on their mortality. Our study demonstrates that different factors and strategies can contribute to the ability of a species to withstand the pressure of a dominant invader at high abundance, and venom chemistry appears to be only one of several strategies utilized.
Utilizing semantic networks to database and retrieve generalized stochastic colored Petri nets
NASA Technical Reports Server (NTRS)
Farah, Jeffrey J.; Kelley, Robert B.
1992-01-01
Previous work has introduced the Planning Coordinator (PCOORD), a coordinator functioning within the hierarchy of the Intelligent Machine Mode. Within the structure of the Planning Coordinator resides the Primitive Structure Database (PSDB) functioning to provide the primitive structures utilized by the Planning Coordinator in the establishing of error recovery or on-line path plans. This report further explores the Primitive Structure Database and establishes the potential of utilizing semantic networks as a means of efficiently storing and retrieving the Generalized Stochastic Colored Petri Nets from which the error recovery plans are derived.
Knutson, Stacy T.; Westwood, Brian M.; Leuthaeuser, Janelle B.; Turner, Brandon E.; Nguyendac, Don; Shea, Gabrielle; Kumar, Kiran; Hayden, Julia D.; Harper, Angela F.; Brown, Shoshana D.; Morris, John H.; Ferrin, Thomas E.; Babbitt, Patricia C.
2017-01-01
Abstract Protein function identification remains a significant problem. Solving this problem at the molecular functional level would allow mechanistic determinant identification—amino acids that distinguish details between functional families within a superfamily. Active site profiling was developed to identify mechanistic determinants. DASP and DASP2 were developed as tools to search sequence databases using active site profiling. Here, TuLIP (Two‐Level Iterative clustering Process) is introduced as an iterative, divisive clustering process that utilizes active site profiling to separate structurally characterized superfamily members into functionally relevant clusters. Underlying TuLIP is the observation that functionally relevant families (curated by Structure‐Function Linkage Database, SFLD) self‐identify in DASP2 searches; clusters containing multiple functional families do not. Each TuLIP iteration produces candidate clusters, each evaluated to determine if it self‐identifies using DASP2. If so, it is deemed a functionally relevant group. Divisive clustering continues until each structure is either a functionally relevant group member or a singlet. TuLIP is validated on enolase and glutathione transferase structures, superfamilies well‐curated by SFLD. Correlation is strong; small numbers of structures prevent statistically significant analysis. TuLIP‐identified enolase clusters are used in DASP2 GenBank searches to identify sequences sharing functional site features. Analysis shows a true positive rate of 96%, false negative rate of 4%, and maximum false positive rate of 4%. F‐measure and performance analysis on the enolase search results and comparison to GEMMA and SCI‐PHY demonstrate that TuLIP avoids the over‐division problem of these methods. Mechanistic determinants for enolase families are evaluated and shown to correlate well with literature results. PMID:28054422
Alcaráz, Mirta R; Schwaighofer, Andreas; Goicoechea, Héctor; Lendl, Bernhard
2016-06-01
In this work, a novel EC-QCL-based setup for mid-IR transmission measurements in the amide I region is introduced for monitoring dynamic changes in secondary structure of proteins. For this purpose, α-chymotrypsin (aCT) acts as a model protein, which gradually forms intermolecular β-sheet aggregates after adopting a non-native α-helical structure induced by exposure to 50 % TFE. In order to showcase the versatility of the presented setup, the effects of varying pH values and protein concentration on the rate of β-aggregation were studied. The influence of the pH value on the initial reaction rate was studied in the range of pH 5.8-8.2. Results indicate an increased aggregation rate at elevated pH values. Furthermore, the widely accessible concentration range of the laser-based IR transmission setup was utilized to investigate β-aggregation across a concentration range of 5-60 mg mL(-1). For concentrations lower than 20 mg mL(-1), the aggregation rate appears to be independent of concentration. At higher values, the reaction rate increases linearly with protein concentration. Extended MCR-ALS was employed to obtain pure spectral and concentration profiles of the temporal transition between α-helices and intermolecular β-sheets. Comparison of the global solutions obtained by the modelled data with results acquired by the laser-based IR transmission setup at different conditions shows excellent agreement. This demonstrates the potential and versatility of the EC-QCL-based IR transmission setup to monitor dynamic changes of protein secondary structure in aqueous solution at varying conditions and across a wide concentration range. Graphical abstract EC-QCL IR spectroscopy for monitoring protein conformation change.
NASA Astrophysics Data System (ADS)
Sun, Zhipeng; Firdoz, Shaik; Ying-Xuan Yap, Esther; Li, Lan; Lu, Xianmao
2013-05-01
We report a hierarchical Ni@MnO2 structure consisting of MnO2 nanowires supported on hollow Ni dendrites for high-performance supercapacitors. The Ni@MnO2 structure, which was prepared via a facile electrodeposition method, is highly porous and appears like a forest of pine trees grown vertically on a substrate. At a MnO2 mass loading of 0.35 mg cm-2, the Ni@MnO2 electrode demonstrated a specific capacitance of 1125 F g-1 that is close to the theoretical value. In addition, a remarkable high-rate performance (766 F g-1 at a discharge current density of 100 A g-1) was achieved. Electrochemical tests in a two-electrode configuration for the Ni@MnO2 structure with a high MnO2 loading of 3.6 mg cm-2 showed a low equivalent series resistance (ESR) of 1 Ω and a high specific power of 72 kW kg-1. This superior performance can be attributed to the highly porous and hierarchical structure of Ni@MnO2 that favors rapid diffusion of an electrolyte, highly conductive pathway for electron transport, and efficient material utilization.We report a hierarchical Ni@MnO2 structure consisting of MnO2 nanowires supported on hollow Ni dendrites for high-performance supercapacitors. The Ni@MnO2 structure, which was prepared via a facile electrodeposition method, is highly porous and appears like a forest of pine trees grown vertically on a substrate. At a MnO2 mass loading of 0.35 mg cm-2, the Ni@MnO2 electrode demonstrated a specific capacitance of 1125 F g-1 that is close to the theoretical value. In addition, a remarkable high-rate performance (766 F g-1 at a discharge current density of 100 A g-1) was achieved. Electrochemical tests in a two-electrode configuration for the Ni@MnO2 structure with a high MnO2 loading of 3.6 mg cm-2 showed a low equivalent series resistance (ESR) of 1 Ω and a high specific power of 72 kW kg-1. This superior performance can be attributed to the highly porous and hierarchical structure of Ni@MnO2 that favors rapid diffusion of an electrolyte, highly conductive pathway for electron transport, and efficient material utilization. Electronic supplementary information (ESI) available: More TEM and SEM images, digital photo, XPS, and XRD of the samples. See DOI: 10.1039/c3nr00209h
NASA Astrophysics Data System (ADS)
Darghouth, Naim Richard
Net metering has become a widespread policy mechanism in the U.S. for supporting customer adoption of distributed photovoltaics (PV), allowing customers with PV systems to reduce their electric bills by offsetting their consumption with PV generation, independent of the timing of the generation relative to consumption. Although net metering is one of the principal drivers for the residential PV market in the U.S., the academic literature on this policy has been sparse and this dissertation contributes to this emerging body of literature. This dissertation explores the linkages between the availability of net metering, wholesale electricity market conditions, retail rates, and the residential bill savings from behind-the-meter PV systems. First, I examine the value of the bill savings that customers receive under net metering and alternatives to net metering, and the associated role of retail rate design, based on current rates and a sample of approximately two hundred residential customers of California's two largest electric utilities. I find that the bill savings per kWh of PV electricity generated varies greatly, largely attributable to the increasing block structure of the California utilities' residential retail rates. I also find that net metering provides significantly greater bill savings than alternative compensation mechanisms based on avoided costs. However, retail electricity rates may shift as wholesale electricity market conditions change. I then investigate a potential change in market conditions -- increased solar PV penetrations -- on wholesale prices in the short-term based on the merit-order effect. This demonstrates the potential price effects of changes in market conditions, but also points to a number of methodological shortcomings of this method, motivating my usage of a long-term capacity investment and economic dispatch model to examine wholesale price effects of various wholesale market scenarios in the subsequent analysis. By developing three types of retail rates (a flat rate, a time-of-use rate, and real-time pricing) from these wholesale price profiles, I examine bill savings from PV generation for the ten wholesale market scenarios under net metering and an alternative to net metering where hourly excess PV generation is compensated at the wholesale price. Most generally, I challenge the common assertion that PV compensation is likely to stay constant (or rise) due to constant (or rising) retail rates, and find that future electricity market scenarios can drive substantial changes in residential retail rates and that these changes, in concert with variations in retail rate structures and PV compensation mechanisms, interact to place substantial uncertainty on the future value of bill savings from residential PV.
Standby Rates for Combined Heat and Power Systems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sedano, Richard; Selecky, James; Iverson, Kathryn
2014-02-01
Improvements in technology, low natural gas prices, and more flexible and positive attitudes in government and utilities are making distributed generation more viable. With more distributed generation, notably combined heat and power, comes an increase in the importance of standby rates, the cost of services utilities provide when customer generation is not operating or is insufficient to meet full load. This work looks at existing utility standby tariffs in five states. It uses these existing rates and terms to showcase practices that demonstrate a sound application of regulatory principles and ones that do not. The paper also addresses areas formore » improvement in standby rates.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Taylor, Colin; Hedman, Bruce; Goldberg, Amelie
Effects (DRIPE) as a real, quantifiable benefit of energy efficiency and demand response programs. DRIPE is a measurement of the value of demand reductions in terms of the decrease in wholesale energy prices, resulting in lower total expenditures on electricity or natural gas across a given grid. Crucially for policymakers and consumer advocates, DRIPE savings accrue not only to the subset of customers who consume less, but to all consumers. Rate-paying customers realize DRIPE savings when price reductions across an electricity or natural gas system are passed on to all retail customers as lower rates (depending upon regulation and marketmore » structure, residual savings may be wholly or partially retained by utilities). DRIPE savings, though seemingly small in terms of percent price reductions or dollars per household, can amount to hundreds of millions of dollars per year across entire states or grids. Therefore, accurately assessing DRIPE benefits can help to ensure appropriate programs are designed and implemented for energy efficiency measures. This paper reviews the existing knowledge and experience from select U.S. states regarding DRIPE (including New York and Ohio), and the potential for expanded application of the concept of DRIPE by regulators. Policymakers and public utility commissions have a critical role to play in setting the methodology for determining DRIPE, encouraging its capture by utilities, and allocating DRIPE benefits among utilities, various groups of customers, and/or society at large. While the methodologies for estimating DRIPE benefits are still being perfected, policymakers can follow the examples of states such as Maryland and Vermont in including conservative DRIPE estimates in their resource planning.« less
Self-Healing Nanocomposite Hydrogel with Well-Controlled Dynamic Mechanics
NASA Astrophysics Data System (ADS)
Li, Qiaochu; Mishra, Sumeet; Chen, Pangkuan; Tracy, Joseph; Holten-Andersen, Niels
Network dynamics is a crucial factor that determines the macroscopic self-healing rate and efficiency in polymeric hydrogel materials, yet its controllability is seldom studied in most reported self-healing hydrogel systems. Inspired by mussel's adhesion chemistry, we developed a novel approach to assemble inorganic nanoparticles and catechol-decorated PEG polymer into a hydrogel network. When utilized as reversible polymer-particle crosslinks, catechol-metal coordination bonds yield a unique gel network with dynamic mechanics controlled directly by interfacial crosslink structure. Taking advantage of this structure-property relationship at polymer-particle interfaces, we next designed a hierarchically structured hybrid gel with two distinct relaxation timescales. By tuning the relative contribution of the two hierarchical relaxation modes, we are able to finely control the gel's dynamic mechanical behavior from a viscoelastic fluid to a stiff solid, yet preserving its fast self-healing property without the need for external stimuli.
Rapid Self-healing Nanocomposite Hydrogel with Tunable Dynamic Mechanics
NASA Astrophysics Data System (ADS)
Li, Qiaochu; Mishra, Sumeet; Chapman, Brian; Chen, Pangkuan; Tracy, Joseph; Holten-Andersen, Niels
The macroscopic healing rate and efficiency in self-repairing hydrogel materials are largely determined by the dissociation dynamics of their polymer network, which is hardly achieved in a controllable manner. Inspired by mussel's adhesion chemistry, we developed a novel approach to assemble inorganic nanoparticles and catechol-decorated PEG polymer into a hydrogel network. When utilized as reversible polymer-particle crosslinks, catechol-metal coordination bonds yield a unique gel network with dynamic mechanics controlled directly by interfacial crosslink structure. Taking advantage of this structure-property relationship at polymer-particle interfaces, we designed a hierarchically structured hybrid gel with two distinct relaxation timescales. By tuning the relative contribution of the two relaxation modes, we are able to finely control the gel's dynamic mechanical behavior from a viscoelastic fluid to a stiff solid, yet preserving its rapid self-healing property without the need for external stimuli.
NASA Astrophysics Data System (ADS)
Chen, Zhe; Jia, Da-Shuang; Zhou, Yue; Hao, Jiang; Liang, Yu; Cui, Zhi-Min; Song, Wei-Guo
2018-03-01
Metal nanoparticles such as Ag, Cu and Fe are effective catalysts for many reactions, whereas a facile method to prepare metal nanoparticles with high uniformed dispersion is still desirable. Herein, the topotactic structure conversion of layered silicate, RUB-15, was utilized to support metal nanoparticles. Through simple ion-exchange and following calcination step, metal nanoparticles were generated in situ inside the interlayer space of layered silica, and the topotactic structure conversion process assured nano-sized and highly uniformed dispersion of metal nanoparticles. The obtained Ag/SiO2 composite showed superior catalytic activity for the reduction of 4-nitrophenol (4-NP) and methylene blue (MB), with a rate constant as high as 0.0607 s-1 and 0.0778 s-1. The simple and universal synthesis method as well as high activity of the product composite endow the strategy good application prospect.
Selective laser melting of hypereutectic Al-Si40-powder using ultra-short laser pulses
NASA Astrophysics Data System (ADS)
Ullsperger, T.; Matthäus, G.; Kaden, L.; Engelhardt, H.; Rettenmayr, M.; Risse, S.; Tünnermann, A.; Nolte, S.
2017-12-01
We investigate the use of ultra-short laser pulses for the selective melting of Al-Si40-powder to fabricate complex light-weight structures with wall sizes below 100 μ {m} combined with higher tensile strength and lower thermal expansion coefficient in comparison to standard Al-Si alloys. During the cooling process using conventional techniques, large primary silicon particles are formed which impairs the mechanical and thermal properties. We demonstrate that these limitations can be overcome using ultra-short laser pulses enabling the rapid heating and cooling in a non-thermal equilibrium process. We analyze the morphology characteristics and micro-structures of single tracks and thin-walled structures depending on pulse energy, repetition rate and scanning velocity utilizing pulses with a duration of 500 {fs} at a wavelength of 1030 {nm}. The possibility to specifically change and optimize the microstructure is shown.
Capriotti, Margherita; Kim, Hyungsuk E; Scalea, Francesco Lanza di; Kim, Hyonny
2017-06-04
This paper discusses a non-destructive evaluation (NDE) technique for the detection of damage in composite aircraft structures following high energy wide area blunt impact (HEWABI) from ground service equipment (GSE), such as heavy cargo loaders and other heavy equipment. The test structures typically include skin, co-cured stringers, and C-frames that are bolt-connected onto the skin with shear ties. The inspection exploits the waveguide geometry of these structures by utilizing ultrasonic guided waves and a line scan approach. Both a contact prototype and a non-contact prototype were developed and tested on realistic test panels subjected to impact in the laboratory. The results are presented in terms of receiver operating characteristic curves that show excellent probability of detection with low false alarm rates for defects located in the panel skin and stringers.
Capriotti, Margherita; Kim, Hyungsuk E.; Lanza di Scalea, Francesco; Kim, Hyonny
2017-01-01
This paper discusses a non-destructive evaluation (NDE) technique for the detection of damage in composite aircraft structures following high energy wide area blunt impact (HEWABI) from ground service equipment (GSE), such as heavy cargo loaders and other heavy equipment. The test structures typically include skin, co-cured stringers, and C-frames that are bolt-connected onto the skin with shear ties. The inspection exploits the waveguide geometry of these structures by utilizing ultrasonic guided waves and a line scan approach. Both a contact prototype and a non-contact prototype were developed and tested on realistic test panels subjected to impact in the laboratory. The results are presented in terms of receiver operating characteristic curves that show excellent probability of detection with low false alarm rates for defects located in the panel skin and stringers. PMID:28772976
Design, prototyping and autonomous control of gasoline-engine variable-pitch quadcopter
NASA Astrophysics Data System (ADS)
Tao, Pang
Supercapacitors, benefited from superb energy and power characteristics, have now drawn intensive interest for their capability of meeting the above requirements. However, traditional materials for supercapacitor electrodes such as activated carbon and metal oxide/hydroxides suffer either a low energy density or poor power input/output rate. The work presented here offer a new strategy to develop novel composites based on carbon nanotubes (CNT) to utilize the synergistic effects of both carbon host and pseudocapacitive guest materials. The main focus is located on how CNT structures with different dimensions affect the device performance. The 0 D particle-like, 2D film-structured and 3D gel-assembled CNT composites have been thoroughly investigated. It is found that CNT structures with higher dimensions are significant in preventing the agglomeration of active materials and improving the electrical conductivity, leading to satisfactory electrochemical performance.
Rotating plug bearing and seal
Wade, Elman E.
1977-01-01
A bearing and seal structure for nuclear reactors utilizing rotating plugs above the nuclear reactor vessel. The structure permits lubrication of bearings and seals of the rotating plugs without risk of the lubricant draining into the reactor vessel below. The structure permits lubrication by utilizing a rotating outer race bearing.
1981-09-14
Commissioners PURPA Public Utility Regulatory Policies Act %GLOSSAk(¥ Aavertising standard As aefineu oy PUijA, no electric utility may recover from any per- son...systems in 4o States, vuerto kico, (uam, and virgin Islanus. Automatic adjustment As detined by PURPA , no electric clause stanuard utility may increase any...Interruptiole rate standard As defined by PURPA , a rate oftereu to eacn industrial and commercial * electric consumer tnat snail retiect the cost of
Inexpensive health care reform: the mathematics of medicine.
Forsyth, Roger A
2010-02-01
There is data to support the hypothesis that US healthcare reform will require systemic changes in their delivery system rather than a segment-by-segment approach to improving individual components such as administrative or pharmaceutical costs or illness-by-illness programs such as comparative effectiveness or disease management. Mathematically, personnel costs provide the largest potential for savings. These costs are reflected in utilization rates. However, when governments or insurers try to control utilization, shortages or dissatisfaction ensue. Therefore, reform should be structured to encourage individually initiated reductions in utilization. This can be facilitated by changing from employer-paid comprehensive group policies of variable coverage to a three-part, standardized, individually purchased, group policy with a targeted deductible and co-pays that provide disincentives to over-utilization and incentives (refunds on unused contributions) to reduce utilization. There will be a public health policy (maternal, infant, and immunizations) that will be very inexpensive and not subject to any disincentives, a catastrophic policy with a deductible and enhanced but diminishing co-pays, and a Health Savings Account that pre-positions funds to cover the deductible and co-pays. These changes will lead to a reduction in administrative costs. The excess capacity created will provide care for the currently uninsured. Savings will be refunded to individuals thereby generating taxes that can pay for needed subsidies. Reform can be inexpensive if it puts the mathematics before the politics.
Demilew, Yeshalem Mulugeta; Gebregergs, Gebremedhin Berhe; Negusie, Azezu Asres
2016-03-01
Childbirth in a health institution has been shown to be associated with lower rates of maternal and neonatal mortality. However, about 85% of mothers in Ethiopia deliver at home. To assess factors associated with institutional delivery service utilization among women who gave birth within one year prior to the study in Dangila district. A cross-sectional study was conducted from February 01-28, 2015. A total of 763 mothers were interviewed using structured questionnaire. SPSS version 20 was used for analysis. Crude and adjusted Odds ratios were computed for selected variables. A P-value less than 0.05 was considered statistical significant. Only 18.3% of mothers gave birth at health facilities. Knowledge on danger signs [AOR=2.0, 95% CI: (1.1, 3.4)], plan to give birth at health institution [AOR=5.4, 95% CI: (3.0, 9.6)], having ANC follow up during pregnancy [AOR=12.9, 95% CI: (5.0, 33.3)] and time taken to get to a nearby health institution [AOR=5.1, 95% CI: (2.9, 9.1)] were associated with institutional delivery service utilization. Institutional delivery was very low. Knowledge about danger signs, having ANC visits, and time were factors associated with institutional delivery service utilization. Thus, the findings recommend repeated re-enforcement of institutional delivery service utilization through professionals. And also, the findings recommend promotion of institutional delivery service utilization through mass media.
Olusile, Adeyemi Oluniyi; Adeniyi, Abiola Adetokunbo; Orebanjo, Olufemi
2014-11-27
There is scarce information available on oral health service utilization patterns and common oral hygiene practices among adult Nigerians. We conducted the 2010-2011 national oral health survey before the introduction of the national oral health policy to determine the prevalence of oral health service utilization, patterns of oral hygiene practices, and self reported oral health status, among adults in various social classes, educational strata, ethnic groups and geopolitical zones in Nigeria. We conducted a cross-sectional survey in North-Central, North-West, South-East, South-South and South-West geopolitical zones of Nigeria. Multi-stage cluster sampling method was used for the sample selection. We administered a structured questionnaire to a total of 7,630 participants. Information on the socio-demographic characteristics, oral hygiene practices and oral health services utilization pattern of participants was obtained. We interviewed 7, 630 participants (55.6% female). The participants ages ranged between 18 and 81 years, mean age was 37.96 (SD = 13.2). Overall 21.2% of the participants rated their oral health status as very good, 37.1% as good and 27.4% as fair. Only 26.4% reported having visited the dentist at least once prior to the conduct of the survey. More than half of these visits (54.9%) were for treatment purpose. Utilization of oral health services was significantly (p < 0.05) associated with being older, more educated and being engaged in a skilled profession. More educated persons, females and younger persons used toothbrushes for daily tooth cleaning. Age, sex, marital status, level of education and occupation were significantly related to daily frequency of tooth cleaning (p < 0.05). Our results show that while most Nigerian adults have a positive view of their oral health status, majority reported poor oral health utilization habits. Older persons resident in the northern zones of the country and less educated persons displayed poorer oral hygiene practices. The study findings suggest that there is low oral health service utilization among adult Nigerians and that socio-demographic variables influence oral health utilization habits and oral hygiene behavior among adult Nigerians Further studies to identify other factors influencing oral health behavior are suggested.
Code of Federal Regulations, 2010 CFR
2010-10-01
... patient utilization calendar year as identified from Medicare claims is calendar year 2007. (4) Wage index... calculating the per-treatment base rate for 2011 are as follows: (1) Per patient utilization in CY 2007, 2008..., 2008 or 2009 to determine the year with the lowest per patient utilization. (2) Update of per treatment...
From clinically relevant outcome measures to quality of life in epilepsy: A time trade-off study.
de Kinderen, Reina J A; Wijnen, Ben F M; van Breukelen, Gerard; Postulart, Debby; Majoie, Marian H J M; Aldenkamp, Albert P; Evers, Silvia M A A
2016-09-01
A proposed method for bridging the gap between clinically relevant epilepsy outcome measures and quality-adjusted life years is to derive utility scores for epilepsy health states. The aim of this study is to develop such a utility-function and to investigate the impact of the epilepsy outcome measures on utility. Health states, based on clinically important epilepsy attributes (e.g. seizure frequency, seizure severity, side-effects), were valued by a sample of the Dutch population (N=525) based on the time trade-off method. In addition to standard demographics, every participant was asked to rate 10 or 11 different health state scenarios. A multilevel regression analysis was performed to account for the nested structure of the data. Results show that the best health state (no seizures and no side-effects) is estimated at 0.89 and the worst state (seizures type 5 twice a day plus severe side-effects) at 0.22 (scale: 0-1). An increase in seizure frequency, occurrence of side-effects, and seizure severity were all significantly associated with lower utility values. Furthermore, seizure severity has the largest impact on quality of life compared with seizure frequency and side-effects. This study provides a utility-function for transforming clinically relevant epilepsy outcome measures into utility estimates. We advise using our utility-function in economic evaluations, when quality of life is not directly measured in a study and hence, no health state utilities are available, or when there is convincing empirical evidence of the insensitivity of a generic quality-of-life-instrument within epilepsy. Copyright © 2016 Elsevier B.V. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Barbose, Galen; Miller, John; Sigrin, Ben
Net-energy metering (NEM) has helped drive the rapid growth of distributed PV (DPV) but has raised concerns about electricity cost shifts, utility financial losses, and inefficient resource allocation. These concerns have motivated real and proposed reforms to utility regulatory and business models. This report explores the challenges and opportunities associated with such reforms in the context of the U.S. Department of Energy's SunShot Initiative. Most of the reforms to date address NEM concerns by reducing the benefits provided to DPV customers and thus constraining DPV deployment. Eliminating NEM nationwide, by compensating exports of PV electricity at wholesale rather than retailmore » rates, could cut cumulative DPV deployment by 20% in 2050 compared with a continuation of current policies. This would slow the PV cost reductions that arise from larger scale and market certainty. It could also thwart achievement of the SunShot deployment goals even if the initiative's cost targets are achieved. This undesirable prospect is stimulating the development of alternative reform strategies that address concerns about distributed PV compensation without inordinately harming PV economics and growth. These alternatives fall into the categories of facilitating higher-value DPV deployment, broadening customer access to solar, and aligning utility profits and earnings with DPV. Specific strategies include utility ownership and financing of DPV, community solar, distribution network operators, services-driven utilities, performance-based incentives, enhanced utility system planning, pricing structures that incentivize high-value DPV configurations, and decoupling and other ratemaking reforms that reduce regulatory lag. These approaches represent near- and long-term solutions for preserving the legacy of the SunShot Initiative.« less
The Balancing Act: How Utility Rates Are Decided. Teacher/Facilitator's Guide.
ERIC Educational Resources Information Center
American Gas Association, Arlington, VA. Educational Services.
Designed for secondary level students, this guide describes the process of establishing utility rates for gas, electricity, telephone, or water services. Insights are presented into the parties and interests involved in rate changes, along with procedures and issues that influence decision-making. The goals of this teaching guide include: (1)…
41 CFR 102-82.20 - What are Executive agencies' rate intervention responsibilities?
Code of Federal Regulations, 2012 CFR
2012-01-01
... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false What are Executive agencies' rate intervention responsibilities? 102-82.20 Section 102-82.20 Public Contracts and Property... PROPERTY 82-UTILITY SERVICES Utility Services § 102-82.20 What are Executive agencies' rate intervention...
41 CFR 102-82.20 - What are Executive agencies' rate intervention responsibilities?
Code of Federal Regulations, 2011 CFR
2011-01-01
... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false What are Executive agencies' rate intervention responsibilities? 102-82.20 Section 102-82.20 Public Contracts and Property... PROPERTY 82-UTILITY SERVICES Utility Services § 102-82.20 What are Executive agencies' rate intervention...
41 CFR 102-82.20 - What are Executive agencies' rate intervention responsibilities?
Code of Federal Regulations, 2010 CFR
2010-07-01
... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What are Executive agencies' rate intervention responsibilities? 102-82.20 Section 102-82.20 Public Contracts and Property... PROPERTY 82-UTILITY SERVICES Utility Services § 102-82.20 What are Executive agencies' rate intervention...
41 CFR 102-82.20 - What are Executive agencies' rate intervention responsibilities?
Code of Federal Regulations, 2014 CFR
2014-01-01
... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What are Executive agencies' rate intervention responsibilities? 102-82.20 Section 102-82.20 Public Contracts and Property... PROPERTY 82-UTILITY SERVICES Utility Services § 102-82.20 What are Executive agencies' rate intervention...
41 CFR 102-82.20 - What are Executive agencies' rate intervention responsibilities?
Code of Federal Regulations, 2013 CFR
2013-07-01
... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false What are Executive agencies' rate intervention responsibilities? 102-82.20 Section 102-82.20 Public Contracts and Property... PROPERTY 82-UTILITY SERVICES Utility Services § 102-82.20 What are Executive agencies' rate intervention...
ERIC Educational Resources Information Center
Owens, Julie Sarno; Storer, Jennifer; Holdaway, Alex S.; Serrano, Verenea J.; Watabe, Yuko; Himawan, Lina K.; Krelko, Rebecca E.; Vause, Katherine J.; Girio-Herrera, Erin; Andrews, Nina
2015-01-01
The current study examined the utility and incremental validity of parent ratings on the Strengths and Difficulties Questionnaire and Disruptive Behavior Disorders rating scale completed at kindergarten registration in identifying risk status as defined by important criterion variables (teacher ratings, daily behavioral performance, and quarterly…
Ward, G.A.; Smith, T. J.; Whelan, K.R.T.; Doyle, T.W.
2006-01-01
Physiological processes and local-scale structural dynamics of mangroves are relatively well studied. Regional-scale processes, however, are not as well understood. Here we provide long-term data on trends in structure and forest turnover at a large scale, following hurricane damage in mangrove ecosystems of South Florida, U.S.A. Twelve mangrove vegetation plots were monitored at periodic intervals, between October 1992 and March 2005. Mangrove forests of this region are defined by a -1.5 scaling relationship between mean stem diameter and stem density, mirroring self-thinning theory for mono-specific stands. This relationship is reflected in tree size frequency scaling exponents which, through time, have exhibited trends toward a community average that is indicative of full spatial resource utilization. These trends, together with an asymptotic standing biomass accumulation, indicate that coastal mangrove ecosystems do adhere to size-structured organizing principles as described for upland tree communities. Regenerative dynamics are different between areas inside and outside of the primary wind-path of Hurricane Andrew which occurred in 1992. Forest dynamic turnover rates, however, are steady through time. This suggests that ecological, more-so than structural factors, control forest productivity. In agreement, the relative mean rate of biomass growth exhibits an inverse relationship with the seasonal range of porewater salinities. The ecosystem average in forest scaling relationships may provide a useful investigative tool of mangrove community biomass relationships, as well as offer a robust indicator of general ecosystem health for use in mangrove forest ecosystem management and restoration. ?? Springer 2006.
Dai, Wenrui; Xiong, Hongkai; Jiang, Xiaoqian; Chen, Chang Wen
2014-01-01
This paper proposes a novel model on intra coding for High Efficiency Video Coding (HEVC), which simultaneously predicts blocks of pixels with optimal rate distortion. It utilizes the spatial statistical correlation for the optimal prediction based on 2-D contexts, in addition to formulating the data-driven structural interdependences to make the prediction error coherent with the probability distribution, which is desirable for successful transform and coding. The structured set prediction model incorporates a max-margin Markov network (M3N) to regulate and optimize multiple block predictions. The model parameters are learned by discriminating the actual pixel value from other possible estimates to maximize the margin (i.e., decision boundary bandwidth). Compared to existing methods that focus on minimizing prediction error, the M3N-based model adaptively maintains the coherence for a set of predictions. Specifically, the proposed model concurrently optimizes a set of predictions by associating the loss for individual blocks to the joint distribution of succeeding discrete cosine transform coefficients. When the sample size grows, the prediction error is asymptotically upper bounded by the training error under the decomposable loss function. As an internal step, we optimize the underlying Markov network structure to find states that achieve the maximal energy using expectation propagation. For validation, we integrate the proposed model into HEVC for optimal mode selection on rate-distortion optimization. The proposed prediction model obtains up to 2.85% bit rate reduction and achieves better visual quality in comparison to the HEVC intra coding. PMID:25505829
NASA Astrophysics Data System (ADS)
Altamirano, Felipe Ignacio Castro
This dissertation focuses on the problem of designing rates in the utility sector. It is motivated by recent developments in the electricity industry, where renewable generation technologies and distributed energy resources are becoming increasingly relevant. Both technologies disrupt the sector in unique ways. While renewables make grid operations more complex, and potentially more expensive, distributed energy resources enable consumers to interact two-ways with the grid. Both developments present challenges and opportunities for regulators, who must adapt their techniques for evaluating policies to the emerging technological conditions. The first two chapters of this work make the case for updating existing techniques to evaluate tariff structures. They also propose new methods which are more appropriate given the prospective technological characteristics of the sector. The first chapter constructs an analytic tool based on a model that captures the interaction between pricing and investment. In contrast to previous approaches, this technique allows consistently comparing portfolios of rates while enabling researchers to model with a significantly greater level of detail the supply side of the sector. A key theoretical implication of the model that underlies this technique is that, by properly updating the portfolio of tariffs, a regulator could induce the welfare maximizing adoption of distributed energy resources and enrollment in rate structures. We develop an algorithm to find globally optimal solutions of this model, which is a nonlinear mathematical program. The results of a computational experiment show that the performance of the algorithm dominates that of commercial nonlinear solvers. In addition, to illustrate the practical relevance of the method, we conduct a cost benefit analysis of implementing time-variant tariffs in two electricity systems, California and Denmark. Although portfolios with time-varying rates create value in both systems, these improvements differ enough to advise very different policies. While in Denmark time-varying tariffs appear unattractive, they at least deserve further revision in California. This conclusion is beyond the reach of previous techniques to analyze rates, as they do not capture the interplay between an intermittent supply and a price-responsive demand. While useful, the method we develop in the first chapter has two important limitations. One is the lack of transparency of the parameters that determine demand substitution patterns, and demand heterogeneity; the other is the narrow range of rate structures that could be studied with the technique. Both limitations stem from taking as a primitive a demand function. Following an alternative path, in the second chapter we develop a technique based on a pricing model that has as a fundamental building block the consumer utility maximization problem. Because researchers do not have to limit themselves to problems with unique solutions, this approach significantly increases the flexibility of the model and, in particular, addresses the limitations of the technique we develop in the first chapter. This gain in flexibility decreases the practicality of our method since the underlying model becomes a Bilevel Problem. To be able to handle realistic instances, we develop a decomposition method based on a non-linear variant of the Alternating Direction Method of Multipliers, which combines Conic and Mixed Integer Programming. A numerical experiment shows that the performance of the solution technique is robust to instance sizes and a wide combination of parameters. We illustrate the relevance of the new method with another applied analysis of rate structures. Our results highlight the value of being able to model in detail distributed energy resources. They also show that ignoring transmission constraints can have meaningful impacts on the analysis of rate structures. In addition, we conduct a distributional analysis, which portrays how our method permits regulators and policy makers to study impacts of a rate update on a heterogeneous population. While a switch in rates could have a positive impact on the aggregate of households, it could benefit some more than others, and even harm some customers. Our technique permits to anticipate these impacts, letting regulators decide among rate structures with considerably more information than what would be available with alternative approaches. In the third chapter, we conduct an empirical analysis of rate structures in California, which is currently undergoing a rate reform. To contribute to the ongoing regulatory debate about the future of rates, we analyze in depth a set of plausible tariff alternatives. In our analysis, we focus on a scenario in which advanced metering infrastructure and home energy management systems are widely adopted. Our modeling approach allows us to capture a wide variety of temporal and spatial demand substitution patterns without the need of estimating a large number of parameters. (Abstract shortened by ProQuest.).
FACTORS ASSOCIATED WITH HEALTHCARE UTILIZATION AMONG ARAB IMMIGRANTS AND REFUGEES
2015-01-01
Background Arab migrants are exposed to pre- and post migration stressors that increase their risk for health problems. However, little is known regarding healthcare utilization rates or factors associated with healthcare utilization among Arab immigrants and refugees. Methods 590 participants were interviewed 1 year post-migration to the United States Factors associated with healthcare utilization including stress coping mechanisms were examined using binary logistic regressions. Results Compared to national healthcare utilization data, immigrants had significantly lower and refugees had significantly higher rates. Being a refugee, married, and having health insurance were significantly associated with medical service utilization. None of the immigrants in this study had utilized psychological services. Among refugees, the use of medications and having strategies for dealing with stress were inversely associated with utilization of psychological services. Discussion (Conclusion) Healthcare utilization was significantly higher among refugees, who also reported a greater need for services than immigrants. PMID:25331684
NASA Technical Reports Server (NTRS)
Collins, T. P.; Witmer, E. A.
1973-01-01
An approximate analysis, termed the Collision Imparted Velocity Method (CIVM), was employed for predicting the transient structural responses of containment rings or deflector rings which are subjected to impact from turbojet-engine rotor burst fragments. These 2-d structural rings may be initially circular or arbitrarily curved and may have either uniform or variable thickness; elastic, strain hardening, and strain rate material properties are accommodated. This approximate analysis utilizes kinetic energy and momentum conservation relations in order to predict the after-impact velocities of the fragment and the impacted ring segment. This information is then used in conjunction with a finite element structural response computation code to predict the transient, large deflection responses of the ring. Similarly, the equations of motion for each fragment are solved in small steps in time. Also, some comparisons of predictions with experimental data for fragment-impacted free containment rings are presented.
Xu, Weijia; Ozer, Stuart; Gutell, Robin R
2009-01-01
With an increasingly large amount of sequences properly aligned, comparative sequence analysis can accurately identify not only common structures formed by standard base pairing but also new types of structural elements and constraints. However, traditional methods are too computationally expensive to perform well on large scale alignment and less effective with the sequences from diversified phylogenetic classifications. We propose a new approach that utilizes coevolutional rates among pairs of nucleotide positions using phylogenetic and evolutionary relationships of the organisms of aligned sequences. With a novel data schema to manage relevant information within a relational database, our method, implemented with a Microsoft SQL Server 2005, showed 90% sensitivity in identifying base pair interactions among 16S ribosomal RNA sequences from Bacteria, at a scale 40 times bigger and 50% better sensitivity than a previous study. The results also indicated covariation signals for a few sets of cross-strand base stacking pairs in secondary structure helices, and other subtle constraints in the RNA structure.
Xu, Weijia; Ozer, Stuart; Gutell, Robin R.
2010-01-01
With an increasingly large amount of sequences properly aligned, comparative sequence analysis can accurately identify not only common structures formed by standard base pairing but also new types of structural elements and constraints. However, traditional methods are too computationally expensive to perform well on large scale alignment and less effective with the sequences from diversified phylogenetic classifications. We propose a new approach that utilizes coevolutional rates among pairs of nucleotide positions using phylogenetic and evolutionary relationships of the organisms of aligned sequences. With a novel data schema to manage relevant information within a relational database, our method, implemented with a Microsoft SQL Server 2005, showed 90% sensitivity in identifying base pair interactions among 16S ribosomal RNA sequences from Bacteria, at a scale 40 times bigger and 50% better sensitivity than a previous study. The results also indicated covariation signals for a few sets of cross-strand base stacking pairs in secondary structure helices, and other subtle constraints in the RNA structure. PMID:20502534
Multi-scale, Hierarchically Nested Young Stellar Structures in LEGUS Galaxies
NASA Astrophysics Data System (ADS)
Thilker, David A.; LEGUS Team
2017-01-01
The study of star formation in galaxies has predominantly been limited to either young stellar clusters and HII regions, or much larger kpc-scale morphological features such as spiral arms. The HST Legacy ExtraGalactic UV Survey (LEGUS) provides a rare opportunity to link these scales in a diverse sample of nearby galaxies and obtain a more comprehensive understanding of their co-evolution for comparison against model predictions. We have utilized LEGUS stellar photometry to identify young, resolved stellar populations belonging to several age bins and then defined nested hierarchical structures as traced by these subsamples of stars. Analagous hierarchical structures were also defined using LEGUS catalogs of unresolved young stellar clusters. We will present our emerging results concerning the physical properties (e.g. area, star counts, stellar mass, star formation rate, ISM characteristics), occupancy statistics (e.g. clusters per substructure versus age and scale, parent/child demographics) and relation to overall galaxy morphology/mass for these building blocks of hierarchical star-forming structure.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Deng, Zhang; He, Wenjie; Duan, Chenlong
2016-01-15
Spatial atomic layer deposition (SALD) is a promising technology with the aim of combining the advantages of excellent uniformity and conformity of temporal atomic layer deposition (ALD), and an industrial scalable and continuous process. In this manuscript, an experimental and numerical combined model of atmospheric SALD system is presented. To establish the connection between the process parameters and the growth efficiency, a quantitative model on reactant isolation, throughput, and precursor utilization is performed based on the separation gas flow rate, carrier gas flow rate, and precursor mass fraction. The simulation results based on this model show an inverse relation betweenmore » the precursor usage and the carrier gas flow rate. With the constant carrier gas flow, the relationship of precursor usage and precursor mass fraction follows monotonic function. The precursor concentration, regardless of gas velocity, is the determinant factor of the minimal residual time. The narrow gap between precursor injecting heads and the substrate surface in general SALD system leads to a low Péclet number. In this situation, the gas diffusion act as a leading role in the precursor transport in the small gap rather than the convection. Fluid kinetics from the numerical model is independent of the specific structure, which is instructive for the SALD geometry design as well as its process optimization.« less
Clandinin, M T
1978-02-01
To evaluate the effect of dietary rapeseed oils on cardiac mitochondrial function and metabolic conservation of energy, male weanling rats derived from the Sprague-Dawley strain were fed three rations containing either 15% (w/w) soybean oil, low erucic acid rapeseed oil or a high erucic acid rapeseed oil. Cardiac mitochondria were isolated for measurement of mitochondrial respiratory functions. Pyruvate and malate plus malonate or succinate plus amytal, or alpha-ketoglutarate and malate plus malonate were utilized as substrates for oxidative phosphorylation. Net rates of state 3 oxygen uptake and therefore ATP synthesis were found to decline with chronic feeding of the 15% (w/w) oil containing diets. Significantly reduced ADP/O ratios were observed for groups fed high erucic acid rapeseed oil containing diets for 11 days. Decreased ADP/O ratios were also observed for groups fed high or low erucic acid rapeseed oils for 112 days. When pyruvate and malate plus malonate were utilized as substrates, reduced rates of ATP synthesis were observed after chronic feeding of high erucic acid rapeseed oil diets. Only prolonged feeding of low erucic acid rapeseed oils resulted in significant alterations in the efficiency of oxidative phosphorylation.
NASA Astrophysics Data System (ADS)
Park, Yong Min; Kim, Byeong Hee; Seo, Young Ho
2016-06-01
This paper presents a selective aluminum anodization technique for the fabrication of microstructures covered by nanoscale dome structures. It is possible to fabricate bulging microstructures, utilizing the different growth rates of anodic aluminum oxide in non-uniform electric fields, because the growth rate of anodic aluminum oxide depends on the intensity of electric field, or current density. After anodizing under a non-uniform electric field, bulging microstructures covered by nanostructures were fabricated by removing the residual aluminum layer. The non-uniform electric field induced by insulative micropatterns was estimated by computational simulations and verified experimentally. Utilizing computational simulations, the intensity profile of the electric field was calculated according to the ratio of height and width of the insulative micropatterns. To compare computational simulation results and experimental results, insulative micropatterns were fabricated using SU-8 photoresist. The results verified that the shape of the bottom topology of anodic alumina was strongly dependent on the intensity profile of the applied electric field, or current density. The one-step fabrication of nanostructure-covered microstructures can be applied to various fields, such as nano-biochip and nano-optics, owing to its simplicity and cost effectiveness.
Nelson, Jonas A; Fischer, John P; Grover, Ritwik; Kovach, Stephen J; Low, David W; Kanchwala, Suhail K; Levin, L Scott; Serletti, Joseph M; Wu, Liza C
2015-06-01
There is limited data on the indications, outcomes, and associated complications with use of interpositional vein grafts (IVG) in microsurgery. This study sought to critically examine and update the utility of this microsurgical technique. All microsurgical cases at a single institution from 2005 to 2011 were examined for use of IVGs in the primary procedure or during take back or salvage attempts. We examined the cohort overall and performed a subgroup analysis by timing of initial IVG. In the study period, 1718 patients underwent 2368 free flaps. 51 IVGs were utilized in 38 patients (2.2%) and 38 flaps (1.6%). Eight (42.1%) of the primary procedure IVGs (n = 19) were planned preoperatively. Nine total flap losses (24%) occurred when IVGs were utilized, 89% of which occurred in the take back cohort (p = 0.02). However, planned IVG had a 100% success rate, and IVG utilized in the primary procedure overall had a 95% success rate. Importantly, A significantly higher rate of thrombotic events was noted in all primary cases where IVGs were utilized (p = 0.005). This study demonstrates that IVGs can be utilized in primary free flap reconstructions with success rates exceeding 95%. However, in salvage procedures, the use of vein grafts does not approach the same rate of success likely due to multiple factors. Yet when utilized appropriately with thrombectomy and resection of the thrombosed vessel to healthy intima, IVGs can provide an important tool for flap salvage. prognostic/risk category, level II. Copyright © 2015 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Niddrie, D.G.
Oil companies, savings banks, public utilities, and other companies have made use of a new kind of financing technique known as lower floaters. The author describes the lower floater and its particular benefits and potential drawbacks. He concludes that, on balance, variable-rate demand bonds have been good for utilities, which have issued them in great quantity. No one knows how many they will be able to issue at acceptable rates after this year, but the answer may rest with Congress. Because of all the uncertainty, utilities in need of financing should consider issuing variable-rate demand bonds as soon as possible.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Darghouth, Naïm R.; Wiser, Ryan; Barbose, Galen
The substantial increase in deployment of customer-sited solar photovoltaics (PV) in the United States has been driven by a combination of steeply declining costs, financing innovations, and supportive policies. Among those supportive policies is net metering, which in most states effectively allows customers to receive compensation for distributed PV generation at the full retail electricity price. The current design of retail electricity rates and the presence of net metering have elicited concerns that the possible under-recovery of fixed utility costs from PV system owners may lead to a feedback loop of increasing retail prices that accelerate PV adoption and furthermore » rate increases. However, a separate and opposing feedback loop could offset this effect: increased PV deployment may lead to a shift in the timing of peak-period electricity prices that could reduce the bill savings received under net metering where time-varying retail electricity rates are used, thereby dampening further PV adoption. In this paper, we examine the impacts of these two competing feedback dynamics on U.S. distributed PV deployment through 2050 for both residential and commercial customers, across states. Our results indicate that, at the aggregate national level, the two feedback effects nearly offset one another and therefore produce a modest net effect, although their magnitude and direction vary by customer segment and by state. We also model aggregate PV deployment trends under various rate designs and net-metering rules, accounting for feedback dynamics. Our results demonstrate that future adoption of distributed PV is highly sensitive to retail rate structures. Whereas flat, time-invariant rates with net metering lead to higher aggregate national deployment levels than the current mix of rate structures (+5% in 2050), rate structures with higher monthly fixed customer charges or PV compensation at levels lower than the full retail rate can dramatically erode aggregate customer adoption of PV (from -14% to -61%, depending on the design). Moving towards time-varying rates, on the other hand, may accelerate near- and medium-term deployment (through 2030), but is found to slow adoption in the longer term (-22% in 2050).« less
Szymkowiak, Dorota; Montgomery, Ann Elizabeth; Johnson, Erin E; Manning, Todd; O'Toole, Thomas P
2017-10-01
Acute health care utilization often occurs among persons experiencing homelessness. However, knowing which individuals will be persistent super-utilizers of acute care is less well understood. The objective of the study was to identify those more likely to be persistent super-utilizers of acute care services. We conducted a latent class analysis of secondary data from the Veterans Health Administration Corporate Data Warehouse, and Homeless Operations Management and Evaluation System. The study sample included 16,912 veterans who experienced homelessness and met super-utilizer criteria in any quarter between July 1, 2014 and December 31, 2015. The latent class analysis included veterans' diagnoses and acute care utilization. Medical, mental health, and substance use morbidity rates were high. More than half of the sample utilized Veterans Health Administration Homeless Programs concurrently with their super-utilization of acute care. There were 7 subgroups of super-utilizers, which varied considerably on the degree to which their super-utilization persisted over time. Approximately a third of the sample met super-utilizer criteria for ≥3 quarters; this group was older and disproportionately male, non-Hispanic white, and unmarried, with lower rates of post-9/11 service and higher rates of rural residence and service-connected disability. They were much more likely to be currently homeless with more medical, mental health, and substance use morbidity. Only a subset of homeless veterans were persistent super-utilizers, suggesting the need for more targeted interventions.
Lodhia, Parth; Gui, Chengcheng; Chandrasekaran, Sivashankar; Suarez-Ahedo, Carlos; Dirschl, Douglas R; Domb, Benjamin G
2016-07-01
Hip arthroscopic surgery has emerged as a successful procedure to manage acetabular labral tears and concurrent hip injuries, which if left untreated, may contribute to hip osteoarthritis (OA). Therefore, it is essential to analyze the economic impact of this treatment option. To investigate the cost-effectiveness of hip arthroscopic surgery versus structured rehabilitation alone for acetabular labral tears, to examine the effects of age on cost-effectiveness, and to estimate the rate of symptomatic OA and total hip arthroplasty (THA) in both treatment arms over a lifetime horizon. Economic and decision analysis; Level of evidence, 2. A cost-effectiveness analysis of hip arthroscopic surgery compared with structured rehabilitation for symptomatic labral tears was performed using a Markov decision model constructed over a lifetime horizon. It was assumed that patients did not have OA. Direct costs (in 2014 United States dollars), utilities of health states (in quality-adjusted life years [QALYs] gained), and probabilities of transitioning between health states were estimated from a comprehensive literature review. Costs were estimated using national averages of Medicare reimbursements, adjusted for all payers in the United States from a societal perspective. Utilities were estimated from the Harris Hip Score. Cost-effectiveness was assessed using the incremental cost-effectiveness ratio (ICER). One-way and probabilistic sensitivity analyses were performed to determine the effect of uncertainty on the model outcomes. For a cohort representative of patients undergoing hip arthroscopic surgery at our facility, arthroscopic surgery was more costly (additional $2653) but generated more utility (additional 3.94 QALYs) compared with rehabilitation over a lifetime. The mean ICER was $754/QALY, well below the conventional willingness to pay of $50,000/QALY. Arthroscopic surgery was cost-effective for 94.5% of patients. Although arthroscopic surgery decreased in cost-effectiveness with increasing age, arthroscopic surgery remained more cost-effective than rehabilitation for patients in the second to seventh decades of life. The lifetime incidence of symptomatic hip OA was over twice as high for patients treated with rehabilitation compared with arthroscopic surgery. The preferred treatment was sensitive to the utility after successful hip arthroscopic surgery, although the utility at which arthroscopic surgery becomes less cost-effective than rehabilitation is far below our best estimate. For older patients, the lifetime cost of arthroscopic surgery was greater, while the lifetime utility of arthroscopic surgery was less, approaching that of the rehabilitation arm. Hip arthroscopic surgery is more cost-effective and results in a considerably lower incidence of symptomatic OA than structured rehabilitation alone in treating symptomatic labral tears of patients in the second to seventh decades of life without pre-existing OA. © 2016 The Author(s).
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dharmarajan, Guha; Beasley, James C.; Beatty, William S.
Many aspects of parasite biology critically depend on their hosts, and understanding how host-parasite populations are co-structured can help improve our understanding of the ecology of parasites, their hosts, and host-parasite interactions. Here, this study utilized genetic data collected from raccoons (Procyon lotor), and a specialist parasite, the raccoon tick (Ixodes texanus), to test for genetic co-structuring of host-parasite populations at both landscape and host scales. At the landscape scale, our analyses revealed a significant correlation between genetic and geographic distance matrices (i.e., isolation by distance) in ticks, but not their hosts. While there are several mechanisms that could leadmore » to a stronger pattern of isolation by distance in tick vs. raccoon datasets, our analyses suggest that at least one reason for the above pattern is the substantial increase in statistical power (due to the ≈8-fold increase in sample size) afforded by sampling parasites. Host-scale analyses indicated higher relatedness between ticks sampled from related vs. unrelated raccoons trapped within the same habitat patch, a pattern likely driven by increased contact rates between related hosts. Lastly, by utilizing fine-scale genetic data from both parasites and hosts, our analyses help improve our understanding of epidemiology and host ecology.« less
Gamst-Klaussen, Thor; Chen, Gang; Lamu, Admassu N; Olsen, Jan Abel
2016-07-01
Different health state utility (HSU) instruments produce different utilities for the same individuals, thereby compromising the intended comparability of economic evaluations of health care interventions. When developing crosswalks, previous studies have indicated nonlinear relationships. This paper inquires into the degree of nonlinearity across the four most widely used HSU-instruments and proposes exchange rates that differ depending on the severity levels of the health state utility scale. Overall, 7933 respondents from six countries, 1760 in a non-diagnosed healthy group and 6173 in seven disease groups, reported their health states using four different instruments: EQ-5D-5L, SF-6D, HUI-3 and 15D. Quantile regressions investigate the degree of nonlinear relationships between these instruments. To compare the instruments across different disease severities, we split the health state utility scale into utility intervals with 0.2 successive decrements in utility starting from perfect health at 1.00. Exchange rates (ERs) are calculated as the mean utility difference between two utility intervals on one HSU-instrument divided by the difference in mean utility on another HSU-instrument. Quantile regressions reveal significant nonlinear relationships across all four HSU-instruments. The degrees of nonlinearities differ, with a maximum degree of difference in the coefficients along the health state utility scale of 3.34 when SF-6D is regressed on EQ-5D. At the lower end of the health state utility scale, the exchange rate from SF-6D to EQ-5D is 2.11, whilst at the upper end it is 0.38. Comparisons at different utility levels illustrate the fallacy of using linear functions as crosswalks between HSU-instruments. The existence of nonlinear relationships between different HSU-instruments suggests that level-specific exchange rates should be used when converting a change in utility on the instrument used, onto a corresponding utility change had another instrument been used. Accounting for nonlinearities will increase the validity of the comparison for decision makers when faced with a choice between interventions whose calculations of QALY gains have been based on different HSU-instruments.
Low power data acquisition unit for autonomous geophysical instrumentation
NASA Astrophysics Data System (ADS)
Prystai, Andrii
2017-04-01
The development of an autonomous instrumentation for field research is always a challenge which needs knowledge and application of recent advances in technology and components production. Using this information a super-low power, low-cost, stand-alone GPS time synchronized data acquisition unit was created. It comprises an extended utilization of the microcontroller modules and peripherals and special firmware with flexible PLL parameters. The present report is devoted to a discussion of synchronization mode of data sampling in autonomous field instruments with possibility of GPS random breaks. In the result the achieved sampling timing accuracy is better than ± 60 ns without phase jumps and distortion plus fixed shift depending on the sample rate. The main application of the system is for simultaneous measurement of several channels from magnetic and electric sensors in field conditions for magneto-telluric instruments. First utilization of this system was in the new developed versions of LEMI-026 magnetometer and LEMI-423 field station, where it was applied for digitizing of up to 6 analogue channels with 32-bit resolution in the range ± 2.5V, digital filtration (LPF) and maximum sample rate 4kS/s. It is ready for record in 5 minutes after being turned on. Recently, this system was successfully utilized with the drone-portable magnetometers destined for the search of metallic objects, like UXO, in rural areas, research of engineering underground structure and for mapping ore bodies. The successful tests of drone-portable system were made and tests results are also discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cappers, Peter; Scheer, Rich
Time-based rate programs, enabled by utility investments in advanced metering infrastructure (AMI), are increasingly being considered by utilities as tools to reduce peak demand and enable customers to better manage consumption and costs. Under the Smart Grid Investment Grant Program (SGIG), the U.S. Department of Energy (DOE) partnered with several electric utilities to conduct consumer behavior studies (CBS). The goals involved applying randomized and controlled experimental designs for estimating customer responses more precisely and credibly to advance understanding of time-based rates and customer systems, and provide new information for improving program designs, implementation strategies, and evaluations. The intent was tomore » produce more robust and credible analysis of impacts, costs, benefits, and lessons learned and assist utility and regulatory decision makers in evaluating investment opportunities involving time-based rates.« less
Rudolf, Joseph; Jackson, Brian R; Wilson, Andrew R; Smock, Kristi J; Schmidt, Robert L
2017-04-01
Health care organizations are under increasing pressure to deliver value by improving test utilization management. Many factors, including organizational factors, could affect utilization performance. Past research has focused on the impact of specific interventions in single organizations. The impact of organizational factors is unknown. The objective of this study is to determine whether testing patterns are subject to organizational effects, ie, are utilization patterns for individual tests correlated within organizations. Comparative analysis of ordering patterns (positivity rates for three genetic tests) across 659 organizations. Hierarchical regression was used to assess the impact of organizational factors after controlling for test-level factors (mutation prevalence) and hospital bed size. Test positivity rates were correlated within organizations. Organizations have a statistically significant impact on the positivity rate of three genetic tests. © American Society for Clinical Pathology, 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com
Results of Ponseti Brasil Program: Multicentric Study in 1621 Feet: Preliminary Results.
Nogueira, Monica P; Queiroz, Ana C D B F; Melanda, Alessandro G; Tedesco, Ana P; Brandão, Antonio L G; Beling, Claudio; Violante, Francisco H; Brandão, Gilberto F; Ferreira, Laura F A; Brambila, Leandro S; Leite, Leopoldina M; Zabeu, Jose L; Kim, Jung H; Fernandes, Kalyana E; Arima, Marcia A S; Aguilar, Maria D P Q; Farias Filho, Orlando C D; Oliveira Filho, Oscar B D A; Pinho, Solange D S; Moulin, Paulo; Volpi, Reinaldo; Fox, Mark; Greenwald, Miles F; Lyle, Brandon; Morcuende, Jose A
The Ponseti method has been shown to be the most effective treatment for congenital clubfoot. The current challenge is to establish sustainable national clubfoot treatment programs that utilize the Ponseti method and integrate it within a nation's governmental health system. The Brazilian Ponseti Program (Programa Ponseti Brasil) has increased awareness of the utility of the Ponseti method and has trained >500 Brazilian orthopaedic surgeons in it. A group of 18 of those surgeons had been able to reproduce the Ponseti clubfoot treatment, and compiled their initial results through structured spreadsheet. The study compiled 1040 patients for a total of 1621 feet. The average follow-up time was 2.3 years with an average correction time of approximately 3 months. Patients required an average of 6.40 casts to achieve correction. This study demonstrates that good initial correction rates are reproducible after training; from 1040 patients only 1.4% required a posteromedial release. Level IV.
Field evaluation and assessment of thermal energy storage for residential space heating
NASA Astrophysics Data System (ADS)
Hersh, H. N.
1982-02-01
A data base was developed based on two heating seasons and 45 test and 30 control homes in Maine and Vermont. Based on first analysis of monitored temperatures and electrical energy used for space heating, fuel bills and reports of users and utilities, the technical performance of TES ceramic and hydronic systems is deemed to be technically satisfactory and there is a high degree of customer acceptance and positive attitudes towards TES. Analysis of house data shows a high degree of variability in electric heat energy demand for a given degree-day. An analysis is underway to investigate relative differences in the efficiency of electricity utilization of storage and direct heating devices. The much higher price of storge systems relative to direct systems is an impediment to market penetration. A changing picture of rate structures may encourage direct systems at the expense of storage systems.
Self-Biased Hybrid Piezoelectric-Photoelectrochemical Cell with Photocatalytic Functionalities.
Tan, Chuan Fu; Ong, Wei Li; Ho, Ghim Wei
2015-07-28
Utilizing solar energy for environmental and energy remediations based on photocatalytic hydrogen (H2) generation and water cleaning poses great challenges due to inadequate visible-light power conversion, high recombination rate, and intermittent availability of solar energy. Here, we report an energy-harvesting technology that utilizes multiple energy sources for development of sustainable operation of dual photocatalytic reactions. The fabricated hybrid cell combines energy harvesting from light and vibration to run a power-free photocatalytic process that exploits novel metal-semiconductor branched heterostructure (BHS) of its visible light absorption, high charge-separation efficiency, and piezoelectric properties to overcome the aforementioned challenges. The desirable characteristics of conductive flexible piezoelectrode in conjunction with pronounced light scattering of hierarchical structure originate intrinsically from the elaborate design yet facile synthesis of BHS. This self-powered photocatalysis system could potentially be used as H2 generator and water treatment system to produce clean energy and water resources.
24 CFR 982.517 - Utility allowance schedule.
Code of Federal Regulations, 2013 CFR
2013-04-01
... percent or more in the utility rate since the last time the utility allowance schedule was revised. The... allowance schedule to correct any errors, or as necessary to update the schedule. (d) Use of utility...
24 CFR 982.517 - Utility allowance schedule.
Code of Federal Regulations, 2012 CFR
2012-04-01
... percent or more in the utility rate since the last time the utility allowance schedule was revised. The... allowance schedule to correct any errors, or as necessary to update the schedule. (d) Use of utility...
24 CFR 982.517 - Utility allowance schedule.
Code of Federal Regulations, 2014 CFR
2014-04-01
... percent or more in the utility rate since the last time the utility allowance schedule was revised. The... allowance schedule to correct any errors, or as necessary to update the schedule. (d) Use of utility...
NASA Technical Reports Server (NTRS)
Goldhirsh, Julius; Musiani, Bert H.
1989-01-01
During a period spanning more than 5 years, low elevation radar measurements of rain were systematically obtained in the mid-Atlantic coast of the U.S. Drop size distribution measurements with a disdrometer were also acquired on the same rain days. The drop size data were utilized to convert the radar reflectivity factors to estimated rain rates for the respective rain days of operation. Applying high level algorithms to the rain data, core values of rain intensities were identified (peak rain rates), and families of rain rate isopleths analyzed. In particular, equicircle diameters of the family of isopleths enveloping peak rain intensities were statistically characterized. The presented results represents the analysis of two rain days, 12 radar scans, corresponding to 430 culled rain rate isopleths from an available data base of 22,000 contours, approximately 100 scans encompassing 17 rain days. The results presented show trends of the average rain rate vs. contour scale dimensions, and cumulative distributions of rain cell dimensions which belong to core families of precipitation.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-04
...This final rule sets forth updates to the home health prospective payment system (HH PPS) rates, including: the national standardized 60-day episode rates; the national per-visit rates; and the low utilization payment amount (LUPA) under the Medicare PPS for home health agencies effective January 1, 2012. This rule applies a 1.4 percent update factor to the episode rates, which reflects a 1 percent reduction applied to the 2.4 percent market basket update factor, as mandated by the Affordable Care Act. This rule also updates the wage index used under the HH PPS, and further reduces home health payments to account for continued nominal growth in case-mix which is unrelated to changes in patient health status. This rule removes two hypertension codes from the HH PPS case-mix system, thereby requiring recalibration of the case-mix weights. In addition, the rule implements two structural changes designed to decrease incentives to upcode and provide unneeded therapy services. Finally, this rule incorporates additional flexibility regarding face-to-face encounters with providers related to home health care.
Yeon, Pyungwoo; Mirbozorgi, S Abdollah; Lim, Jaemyung; Ghovanloo, Maysam
2017-12-01
This paper presents a feasibility study of wireless power and data transmission through an inductive link to a 1-mm 2 implant, to be used as a free-floating neural probe, distributed across a brain area of interest. The proposed structure utilizes a four-coil inductive link for back telemetry, shared with a three-coil link for wireless power transmission. We propose a design procedure for geometrical optimization of the inductive link in terms of power transmission efficiency (PTE) considering specific absorption rate and data rate. We have designed a low-power pulse-based active data transmission circuit and characterized performance of the proposed inductive link in terms of its data rate and bit error rate (BER). The 1-mm 2 data-Tx/power-Rx coil is implemented using insulated bonding wire with diameter, resulting in measured PTE in tissue media of 2.01% at 131 MHz and 1.8-cm coil separation distance when the resonator coil inner radius is 1 cm. The measured BER at 1-Mbps data rate was and in the air and tissue environments, respectively.
2011-11-04
This final rule sets forth updates to the home health prospective payment system (HH PPS) rates, including: the national standardized 60-day episode rates; the national per-visit rates; and the low utilization payment amount (LUPA) under the Medicare PPS for home health agencies effective January 1, 2012. This rule applies a 1.4 percent update factor to the episode rates, which reflects a 1 percent reduction applied to the 2.4 percent market basket update factor, as mandated by the Affordable Care Act. This rule also updates the wage index used under the HH PPS, and further reduces home health payments to account for continued nominal growth in case-mix which is unrelated to changes in patient health status. This rule removes two hypertension codes from the HH PPS case-mix system, thereby requiring recalibration of the case-mix weights. In addition, the rule implements two structural changes designed to decrease incentives to upcode and provide unneeded therapy services. Finally, this rule incorporates additional flexibility regarding face-to-face encounters with providers related to home health care.
Healthcare Utilization After a Children's Health Insurance Program Expansion in Oregon.
Bailey, Steffani R; Marino, Miguel; Hoopes, Megan; Heintzman, John; Gold, Rachel; Angier, Heather; O'Malley, Jean P; DeVoe, Jennifer E
2016-05-01
The future of the Children's Health Insurance Program (CHIP) is uncertain after 2017. Survey-based research shows positive associations between CHIP expansions and children's healthcare utilization. To build on this prior work, we used electronic health record (EHR) data to assess temporal patterns of healthcare utilization after Oregon's 2009-2010 CHIP expansion. We hypothesized increased post-expansion utilization among children who gained public insurance. Using EHR data from 154 Oregon community health centers, we conducted a retrospective cohort study of pediatric patients (2-18 years old) who gained public insurance coverage during the Oregon expansion (n = 3054), compared to those who were continuously publicly insured (n = 10,946) or continuously uninsured (n = 10,307) during the 2-year study period. We compared pre-post rates of primary care visits, well-child visits, and dental visits within- and between-groups. We also conducted longitudinal analysis of monthly visit rates, comparing the three insurance groups. After Oregon's 2009-2010 CHIP expansions, newly insured patients' utilization rates were more than double their pre-expansion rates [adjusted rate ratios (95 % confidence intervals); increases ranged from 2.10 (1.94-2.26) for primary care visits to 2.77 (2.56-2.99) for dental visits]. Utilization among the newly insured spiked shortly after coverage began, then leveled off, but remained higher than the uninsured group. This study used EHR data to confirm that CHIP expansions are associated with increased utilization of essential pediatric primary and preventive care. These findings are timely to pending policy decisions that could impact children's access to public health insurance in the United States.
Shell tile thermal protection system
NASA Technical Reports Server (NTRS)
Macconochie, I. O.; Lawson, A. G.; Kelly, H. N. (Inventor)
1984-01-01
A reusable, externally applied thermal protection system for use on aerospace vehicles subject to high thermal and mechanical stresses utilizes a shell tile structure which effectively separates its primary functions as an insulator and load absorber. The tile consists of structurally strong upper and lower metallic shells manufactured from materials meeting the thermal and structural requirements incident to tile placement on the spacecraft. A lightweight, high temperature package of insulation is utilized in the upper shell while a lightweight, low temperature insulation is utilized in the lower shell. Assembly of the tile which is facilitated by a self-locking mechanism, may occur subsequent to installation of the lower shell on the spacecraft structural skin.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ennis, B.M.; Maddox, I.S.
1987-02-20
A study was performed to optimize the production of solvents from whey permeate in batch fermentation using Clostridium acetobutylicum P262. Fermentations performed at relatively low pH values resulted in high solvent yields and productivities, but lactose utilization was incomplete. At higher pH values, lactose-utilization was improved but acid production dominated over solvent production. When operating at the higher pH values, an increase in the initial lactose concentration of the whey permeate resulted in lower rates of lactose utilization, and this was accompanied by increased solvent production and decreased acid production. Analysis of data from several experiments revealed a strong inversemore » relationship between solvent yield and lactose utilization rate. Thus, conditions which minimize the lactose utilization rate such as low culture pH values or high initial lactose concentrations, favor solventogenesis at the expense of acid production. 12 references.« less
Scenario analysis for sustainable development of Chongming Island: water resources sustainability.
Ni, Xiong; Wu, Yanqing; Wu, Jun; Lu, Jian; Wilson, P Chris
2012-11-15
With the socioeconomic and urban development of Chongming Island (the largest alluvial island in the world), water demand is rapidly growing. To make adjustments to the water utilization structure of each industry, allocate limited water resources, and increase local water use efficiency, this study performed a scenario analysis for the water sustainability of Chongming Island. Four different scenarios were performed to assess the water resource availability by 2020. The growth rate for water demand will be much higher than that of water supply under a serious situation prediction. The water supply growth volume will be 2.22 × 10(8)m(3) from 2010 to 2020 under Scenario I and Scenario II while the corresponding water demand growth volume will be 2.74 × 10(8)m(3) and 2.64 × 10(8)m(3), respectively. There will be a rapid growth in water use benefit under both high and low development modes. The water use benefit will be about 50 CNY/m(3) under Scenarios I and II in 2020. The production structure will need to be adjusted for sustainable utilization of water resources. Sewage drainage but not the forest and grass coverage rate will be a major obstacle to future development and environmental quality. According to a multi-level fuzzy comprehensive evaluation, Scenario II is finally deemed to be the most desirable plan, suggesting that the policy of rapid socioeconomic development and better environmental protection may achieve the most sustainable development of Chongming Island in the future. Copyright © 2012 Elsevier B.V. All rights reserved.
From orbital debris capture systems through internal combustion engines on Mars
NASA Technical Reports Server (NTRS)
1991-01-01
The investigation and conceptualization of an orbital debris collector was the primary area of design. In addition, an alternate structural design for Space Station Freedom and systems supporting resource utilization at Mars and the moon were studied. Hardware for production of oxygen from simulate Mars atmosphere was modified to permit more reliable operation at low pressures (down to 10 mb). An internal combustion engine was altered to study how Mars atmosphere could be used as a diluent to control combustion temperatures and avoid excess Mars propellant production requirements that would result from either methane-rich or oxygen-rich, methane-oxygen combustion. An elastic loop traction system that could be used for lunar construction vehicles was refined to permit testing. A parabolic heat rejection radiator system was designed and built to determine whether it was capable of increasing heat rejection rates during lunar daytime operation. In addition, an alternate space station truss design, utilizing a pre-integrated concept, was studied and found to reduce estimate extravehicular activity (EVA) time and increase the structural integrity when compared to the original Warren truss concept. An orbital-debris-capturing spacecraft design which could be mated with the Orbital Maneuvering Vehicle was studied. The design identified Soviet C-1B boosters as the best targets of opportunity in Earth orbits between an altitude of 900 km and 1100 km and at an inclination of 82.9 deg. A dual robot pallet, which could be spun to match the tumbling rate of the C-1B booster, was developed as the conceptual design.
Neuron-Type-Specific Utility in a Brain-Machine Interface: a Pilot Study.
Garcia-Garcia, Martha G; Bergquist, Austin J; Vargas-Perez, Hector; Nagai, Mary K; Zariffa, Jose; Marquez-Chin, Cesar; Popovic, Milos R
2017-11-01
Firing rates of single cortical neurons can be volitionally modulated through biofeedback (i.e. operant conditioning), and this information can be transformed to control external devices (i.e. brain-machine interfaces; BMIs). However, not all neurons respond to operant conditioning in BMI implementation. Establishing criteria that predict neuron utility will assist translation of BMI research to clinical applications. Single cortical neurons (n=7) were recorded extracellularly from primary motor cortex of a Long-Evans rat. Recordings were incorporated into a BMI involving up-regulation of firing rate to control the brightness of a light-emitting-diode and subsequent reward. Neurons were classified as 'fast-spiking', 'bursting' or 'regular-spiking' according to waveform-width and intrinsic firing patterns. Fast-spiking and bursting neurons were found to up-regulate firing rate by a factor of 2.43±1.16, demonstrating high utility, while regular-spiking neurons decreased firing rates on average by a factor of 0.73±0.23, demonstrating low utility. The ability to select neurons with high utility will be important to minimize training times and maximize information yield in future clinical BMI applications. The highly contrasting utility observed between fast-spiking and bursting neurons versus regular-spiking neurons allows for the hypothesis to be advanced that intrinsic electrophysiological properties may be useful criteria that predict neuron utility in BMI implementation.
24 CFR 246.8 - Materials to be submitted to HUD in support of preemption request.
Code of Federal Regulations, 2011 CFR
2011-04-01
... separate breakdown of rent loss due to tenant turnover for the past 2 years. (6) A certified statement... by the following: (i) Tax rates or appraisals, (ii) Utility rates, (iii) Contracts for employees or... appraisals, (ii) Utility rates, (iii) Contracts for employees or services, (iv) Insurance. If there are none...
ERIC Educational Resources Information Center
McCane-Bowling, Sara J.; Strait, Andrea D.; Guess, Pamela E.; Wiedo, Jennifer R.; Muncie, Eric
2014-01-01
This study examined the predictive utility of five formative reading measures: words correct per minute, number of comprehension questions correct, reading comprehension rate, number of maze correct responses, and maze accurate response rate (MARR). Broad Reading cluster scores obtained via the Woodcock-Johnson III (WJ III) Tests of Achievement…
A prototype analysis of forgiveness.
Kearns, Jill N; Fincham, Frank D
2004-07-01
Many definitions of forgiveness currently exist in the literature. The current research adds to this discussion by utilizing a prototype approach to examine lay conceptions of forgiveness. A prototype approach involves categorizing objects or events in terms of their similarity to a good example, whereas a classical approach requires that there are essential elements that must be present. In Study 1, participants listed the features of forgiveness. Study 2 obtained centrality ratings for these features. In Studies 3 and 4, central features were found to be more salient in memory than peripheral features. Study 5 showed that feature centrality influenced participants' ratings of victims involved in hypothetical transgressions. Thus, the two criteria for demonstrating prototype structure (that participants find it meaningful to judge features in terms of their centrality and that centrality affects cognition) were met.
A 200 W Hall thruster with hollow indented anode
NASA Astrophysics Data System (ADS)
Ding, Yongjie; Sun, Hezhi; Wei, Liqiu; Li, Peng; Su, Hongbo; Peng, Wuji; Yu, Daren
2017-10-01
A hollow indented anode is proposed for increasing the neutral gas density in a discharge channel, in order to improve the performance of the thruster. The experimental results show that a hollow indented anode structure can effectively improve the performance, compared to a hollow straight anode under similar operating conditions, in terms of thrust, propellant utilization, ionization rate, and anode efficiency. Furthermore, simulations show that the indented anode can effectively increase the neutral gas density in a discharge channel and on the centerline of the channel, compared to a hollow straight anode. In addition, it can increase the ionization rate in the channel and the pre-ionization in the anode. Therefore, the hollow indented anode could be considered as an important design idea for improving thruster performance.
Lah, Soowhan; Wilson, Emily L; Beesley, Sarah; Sagy, Iftach; Orme, James; Novack, Victor; Brown, Samuel M
2018-01-09
The Center for Medicare and Medicaid Services (CMS) and the Hospital Quality Alliance began collecting and reporting United States hospital performance in the treatment of pneumonia and heart failure in 2008. Whether the utilization of hospice might affect CMS-reported mortality and readmission rates is not known. Hospice utilization (mean days on hospice per decedent) for 2012 from the Dartmouth Atlas (a project of the Dartmouth Institute that reports a variety of public health and policy-related statistics) was merged with hospital-level 30-day mortality and readmission rates for pneumonia and heart failure from CMS. The association between hospice use and outcomes was analyzed with multivariate quantile regression controlling for quality of care metrics, acute care bed availability, regional variability and other measures. 2196 hospitals reported data to both CMS and the Dartmouth Atlas in 2012. Higher rates of hospice utilization were associated with lower rates of 30-day mortality and readmission for pneumonia but not for heart failure. Higher quality of care was associated with lower rates of mortality for both pneumonia and heart failure. Greater acute care bed availability was associated with increased readmission rates for both conditions (p < 0.05 for all). Higher rates of hospice utilization were associated with lower rates of 30-day mortality and readmission for pneumonia as reported by CMS. While causality is not established, it is possible that hospice referrals might directly affect CMS outcome metrics. Further clarification of the relationship between hospice referral patterns and publicly reported CMS outcomes appears warranted.
Lapham, Sandra C; McMillan, Garnett; Gregory, Cindy
2003-01-01
We evaluated the effects of an enhanced substance misuse (SM) prevention/early intervention programme on referrals to an employee assistance programme, health care utilization rates, on-the-job injury rates and job termination rates among health care professionals employed in a managed care organization. The intervention was implemented at one site, with the remaining sites serving as the comparison group. Existing data from hospital databases were used to compare events occurring in the periods before and after initiation of the intervention. To account for baseline differences in age, gender and job class, logistic regression models produced adjusted means for events per employee month-at-risk. We found that employee assistance referrals and non-SM-related in-patient hospitalizations increased significantly post-intervention, while rates of total out-patient SM-related visits decreased at both the intervention and comparison sites post-intervention. There was a small, statistically significant decrease in the monthly rate (OR = 0.92) of non-SM out-patient utilization at the intervention site, once the intervention was in place. No differences potentially attributable to the intervention were detected in job turnover or injury rates. We conclude that, while the intervention did not appear to affect health care utilization for SM-related problems, it was associated with increased referrals for employee assistance.
Colloidal Aggregate Structure under Shear by USANS
NASA Astrophysics Data System (ADS)
Chatterjee, Tirtha; van Dyk, Antony K.; Ginzburg, Valeriy V.; Nakatani, Alan I.
2015-03-01
Paints are complex formulations of polymeric binders, inorganic pigments, dispersants, surfactants, colorants, rheology modifiers, and other additives. A commercially successful paint exhibits a desired viscosity profile over a wide shear rate range from 10-5 s-1 for settling to >104 s-1 for rolling, and spray applications. Understanding paint formulation structure is critical as it governs the paint viscosity profile. However, probing paint formulation structure under shear is a challenging task due to the formulation complexity containing structures with different hierarchical length scales and their alterations under the influence of an external flow field. In this work mesoscale structures of paint formulations under shear are investigated using Ultra Small-Angle Neutron Scattering (rheo-USANS). Contrast match conditions were utilized to independently probe the structure of latex binder particle aggregates and the TiO2 pigment particle aggregates. Rheo-USANS data revealed that the aggregates are fractal in nature and their self-similarity dimensions and correlations lengths depend on the chemistry of the binder particles, the type of rheology modifier present and the shear stress imposed upon the formulation. These results can be explained in the framework of diffusion and reaction limited transient aggregates structure evolution under simple shear.
Computational design of thermostabilizing point mutations for G protein-coupled receptors
Popov, Petr; Peng, Yao; Shen, Ling; Stevens, Raymond C; Cherezov, Vadim; Liu, Zhi-Jie
2018-01-01
Engineering of GPCR constructs with improved thermostability is a key for successful structural and biochemical studies of this transmembrane protein family, targeted by 40% of all therapeutic drugs. Here we introduce a comprehensive computational approach to effective prediction of stabilizing mutations in GPCRs, named CompoMug, which employs sequence-based analysis, structural information, and a derived machine learning predictor. Tested experimentally on the serotonin 5-HT2C receptor target, CompoMug predictions resulted in 10 new stabilizing mutations, with an apparent thermostability gain ~8.8°C for the best single mutation and ~13°C for a triple mutant. Binding of antagonists confers further stabilization for the triple mutant receptor, with total gains of ~21°C as compared to wild type apo 5-HT2C. The predicted mutations enabled crystallization and structure determination for the 5-HT2C receptor complexes in inactive and active-like states. While CompoMug already shows high 25% hit rate and utility in GPCR structural studies, further improvements are expected with accumulation of structural and mutation data. PMID:29927385
Small molecule correctors of F508del-CFTR discovered by structure-based virtual screening
NASA Astrophysics Data System (ADS)
Kalid, Ori; Mense, Martin; Fischman, Sharon; Shitrit, Alina; Bihler, Hermann; Ben-Zeev, Efrat; Schutz, Nili; Pedemonte, Nicoletta; Thomas, Philip J.; Bridges, Robert J.; Wetmore, Diana R.; Marantz, Yael; Senderowitz, Hanoch
2010-12-01
Folding correctors of F508del-CFTR were discovered by in silico structure-based screening utilizing homology models of CFTR. The intracellular segment of CFTR was modeled and three cavities were identified at inter-domain interfaces: (1) Interface between the two Nucleotide Binding Domains (NBDs); (2) Interface between NBD1 and Intracellular Loop (ICL) 4, in the region of the F508 deletion; (3) multi-domain interface between NBD1:2:ICL1:2:4. We hypothesized that compounds binding at these interfaces may improve the stability of the protein, potentially affecting the folding yield or surface stability. In silico structure-based screening was performed at the putative binding-sites and a total of 496 candidate compounds from all three sites were tested in functional assays. A total of 15 compounds, representing diverse chemotypes, were identified as F508del folding correctors. This corresponds to a 3% hit rate, tenfold higher than hit rates obtained in corresponding high-throughput screening campaigns. The same binding sites also yielded potentiators and, most notably, compounds with a dual corrector-potentiator activity (dual-acting). Compounds harboring both activity types may prove to be better leads for the development of CF therapeutics than either pure correctors or pure potentiators. To the best of our knowledge this is the first report of structure-based discovery of CFTR modulators.
The adaption of coal quality to furnace structure
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zhang, Z.; Shun, X.
1996-12-31
This paper gives the research result of coal quality adaption to furnace structure. The designing of a furnace is based on the coal quality that the furnace would fire. If the coal fired in the furnace differs from the design coal, there would be a lot of problems such as flame stability, coal burn-out rate and slagging problem for the furnace during its operation. In order to know the adaptional range of coal quality for an existing furnace the authors had chosen three different furnaces and 18 kinds of coals in their research work. To understand the coal combustion characteristicsmore » they introduce different indexes to show different processes of coal combustion. These indexes include Fz index which demonstrates the coal combustion based on its utility analyzed result, flame stability index, combustion characteristic index and char burn-out index which are based on the analyzed result of thermogravimetric characteristic. As a furnace is built up and set into operation its flame stability, burn-out rate and ash deposition are definite. If a furnace`s fuel changes its structure characteristics and operation condition will change. A relation between coal quality to furnace structure is based on a lot of regressional analysis results of existing furnaces and their fuels. Based on this relation the adaption of coal quality for a furnace are defined and the kinds of coal furnace fired are optimized to its design fuel.« less
Dornburg, Alex; Su, Zhuo; Townsend, Jeffrey P
2018-06-25
With the rise of genome- scale datasets there has been a call for increased data scrutiny and careful selection of loci appropriate for attempting the resolution of a phylogenetic problem. Such loci are desired to maximize phylogenetic information content while minimizing the risk of homoplasy. Theory posits the existence of characters that evolve under such an optimum rate, and efforts to determine optimal rates of inference have been a cornerstone of phylogenetic experimental design for over two decades. However, both theoretical and empirical investigations of optimal rates have varied dramatically in their conclusions: spanning no relationship to a tight relationship between the rate of change and phylogenetic utility. Here we synthesize these apparently contradictory views, demonstrating both empirical and theoretical conditions under which each is correct. We find that optimal rates of characters-not genes-are generally robust to most experimental design decisions. Moreover, consideration of site rate heterogeneity within a given locus is critical to accurate predictions of utility. Factors such as taxon sampling or the targeted number of characters providing support for a topology are additionally critical to the predictions of phylogenetic utility based on the rate of character change. Further, optimality of rates and predictions of phylogenetic utility are not equivalent, demonstrating the need for further development of comprehensive theory of phylogenetic experimental design.
26 CFR 1.42-10 - Utility allowances.
Code of Federal Regulations, 2012 CFR
2012-04-01
... into account, among other things, local utility rates, property type, climate and degree-day variables... which the building containing the units is located. (c) Changes in applicable utility allowance—(1) In...)), the applicable utility allowance for units changes, the new utility allowance must be used to compute...
26 CFR 1.42-10 - Utility allowances.
Code of Federal Regulations, 2014 CFR
2014-04-01
... into account, among other things, local utility rates, property type, climate and degree-day variables... which the building containing the units is located. (c) Changes in applicable utility allowance—(1) In...)), the applicable utility allowance for units changes, the new utility allowance must be used to compute...
26 CFR 1.42-10 - Utility allowances.
Code of Federal Regulations, 2013 CFR
2013-04-01
... into account, among other things, local utility rates, property type, climate and degree-day variables... which the building containing the units is located. (c) Changes in applicable utility allowance—(1) In...)), the applicable utility allowance for units changes, the new utility allowance must be used to compute...
26 CFR 1.42-10 - Utility allowances.
Code of Federal Regulations, 2011 CFR
2011-04-01
... into account, among other things, local utility rates, property type, climate and degree-day variables... which the building containing the units is located. (c) Changes in applicable utility allowance—(1) In...)), the applicable utility allowance for units changes, the new utility allowance must be used to compute...
26 CFR 1.42-10 - Utility allowances.
Code of Federal Regulations, 2010 CFR
2010-04-01
... into account, among other things, local utility rates, property type, climate and degree-day variables... which the building containing the units is located. (c) Changes in applicable utility allowance—(1) In...)), the applicable utility allowance for units changes, the new utility allowance must be used to compute...
Urban Middle School Students' Perceptions of the Value and Difficulty of Inquiry
NASA Astrophysics Data System (ADS)
Sandoval, William A.; Harven, Aletha M.
2011-02-01
Following their participation in a guided-inquiry unit, 129 seventh-graders from five diverse urban middle schools were asked about their perceptions of specific inquiry tasks, from an expectancy-value framework. Students were asked to rate the interest value, utility value, and task difficulty of (a) data collection design; (b) explanation; (c) data analysis; and (d) citing evidence for claims. The utility of all tasks was rated highly, while interest ratings were moderate. Students perceived these tasks as moderately different from their usual work, and not especially difficult. No gender differences were found in students' ratings. Investigation tasks were rated as more interesting and useful than argumentation tasks. Students from lower SES schools found all tasks more useful and interesting than their peers in higher SES schools. Students' justifications for their ratings suggest they valued the utility of knowing how to back up their ideas with evidence.
Emergency Department Utilization Report to Decrease Visits by Pediatric Gastroenterology Patients.
Lee, Jarone; Greenspan, Peter T; Israel, Esther; Katz, Aubrey; Fasano, Alessio; Kaafarani, Haytham M A; Linov, Pamela L; Raja, Ali S; Rao, Sandhya K
2016-07-01
Emergency department (ED) utilization is a major driver of health care costs. Specialist physicians have an important role in addressing ED utilization, especially at highly specialized, academic medical centers. We sought to investigate whether reporting of ED utilization to specialist physicians can decrease ED visits. This study analyzed an intervention to reduce ED utilization among ED patients who were followed by pediatric gastroenterologists. In May 2013, each pediatric gastroenterologist began receiving reports with rates of ED use by their patients. The reports generated discussion that resulted in a cultural and process change in which patients with urgent gastrointestinal (GI)-related complaints were preferentially seen in the office. Using control charts, we examined GI-related and all-diagnoses ED use over a 2-year period. The rate of GI-related ED visits decreased by 60% after the intervention, from 4.89 to 1.95 per 1000 office visits (P < .001). Similarly, rates of GI-related ED visits during office hours decreased by 59% from 2.19 to 0.89 per 1000 (P < .001). Rates of all-diagnoses ED visits did not change. Physician-level reporting of ED utilization to pediatric gastroenterologists was associated with physician engagement and a cultural and process change to preferentially treat patients with urgent issues in the office. Copyright © 2016 by the American Academy of Pediatrics.
NASA Astrophysics Data System (ADS)
Wang, Shang; Singh, Manmohan; Lopez, Andrew L.; Wu, Chen; Raghunathan, Raksha; Schill, Alexander; Li, Jiasong; Larin, Kirill V.; Larina, Irina V.
2016-03-01
Efficient phenotyping of cardiac dynamics in live mouse embryos has significant implications on understanding of early mammalian heart development and congenital cardiac defects. Recent studies established optical coherence tomography (OCT) as a powerful tool for live embryonic heart imaging in various animal models. However, current four-dimensional (4D) OCT imaging of the beating embryonic heart largely relies on gated data acquisition or postacquisition synchronization, which brings errors when cardiac cycles lack perfect periodicity and is time consuming and computationally expensive. Here, we report direct 4D OCT imaging of the structure and function of cardiac dynamics in live mouse embryos achieved by employing a Fourier domain mode-locking swept laser source that enables ~1.5 MHz A-line rate. Through utilizing both forward and backward scans of a resonant mirror, we obtained a ~6.4 kHz frame rate, which allows for a direct volumetric data acquisition speed of ~43 Hz, around 20 times of the early-stage mouse embryonic heart rate. Our experiments were performed on mouse embryos at embryonic day 9.5. Time-resolved 3D cardiodynamics clearly shows the heart structure in motion. We present analysis of cardiac wall movement and its velocity from the primitive atrium and ventricle. Our results suggest that the combination of ultrahigh-speed OCT imaging with live embryo culture could be a useful embryonic heart phenotyping approach for mouse mutants modeling human congenital heart diseases.
NASA Astrophysics Data System (ADS)
Wan, Wang; Wang, Chao; Zhang, Weidong; Chen, Jitao; Zhou, Henghui; Zhang, Xinxiang
2014-01-01
A nanoscale Fe3O4/porous carbon-multiwalled carbon nanotubes (MWCNTs) composite is synthesized through a simple hard-template method by using Fe2O3 nanoparticles as the precursor and SiO2 nanoparticles as the template. The composite shows good cycle performance (941 mAh g-1 for the first cycle at 0.1 C, with 106% capacity retention at the 80th cycle) and high rate capability (71% capacity retained at 5 C rate). Its excellent electrical properties can be attributed to the porous carbon framework structure, which is composed of carbon and MWCNTs. In this composite, the porous structure provides space for the change in Fe3O4 volume during cycling and shortens the lithium ion diffusion distance, the MWCNTs increase the electron conductivity, and the carbon coating reduces the risk of side reactions. The results provide clear evidences for the utility of porous carbon framework to improve the electrochemical performances of nanosized transition-metal oxides as anode materials for lithium-ion batteries.
Vázquez-Galván, Javier; Flox, Cristina; Fàbrega, Cristian; Ventosa, Edgar; Parra, Andres; Andreu, Teresa; Morante, Joan Ramón
2017-05-09
Hydrogen-treated TiO 2 as an electrocatalyst has shown to boost the capacity of high-performance all-vanadium redox flow batteries (VRFBs) as a simple and eco-friendly strategy. The graphite felt-based GF@TiO 2 :H electrode is able to inhibit the hydrogen evolution reaction (HER), which is a critical barrier for operating at high rate for long-term cycling in VRFBs. Significant improvements in charge/discharge and electron-transfer processes for the V 3+ /V 2+ reaction on the surface of reduced TiO 2 were achieved as a consequence of the formation of oxygen functional groups and oxygen vacancies in the lattice structure. Key performance indicators of VRFB have been improved, such as high capability rates and electrolyte-utilization ratios (82 % at 200 mA cm -2 ). Additionally, high coulombic efficiencies (ca. 100 % up to the 96th cycle, afterwards >97 %) were obtained, demonstrating the feasibility of achieving long-term stability. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
A Model for the Oxidation of Carbon Silicon Carbide Composite Structures
NASA Technical Reports Server (NTRS)
Sullivan, Roy M.
2004-01-01
A mathematical theory and an accompanying numerical scheme have been developed for predicting the oxidation behavior of carbon silicon carbide (C/SiC) composite structures. The theory is derived from the mechanics of the flow of ideal gases through a porous solid. The result of the theoretical formulation is a set of two coupled nonlinear differential equations written in terms of the oxidant and oxide partial pressures. The differential equations are solved simultaneously to obtain the partial vapor pressures of the oxidant and oxides as a function of the spatial location and time. The local rate of carbon oxidation is determined using the map of the local oxidant partial vapor pressure along with the Arrhenius rate equation. The nonlinear differential equations are cast into matrix equations by applying the Bubnov-Galerkin weighted residual method, allowing for the solution of the differential equations numerically. The numerical method is demonstrated by utilizing the method to model the carbon oxidation and weight loss behavior of C/SiC specimens during thermogravimetric experiments. The numerical method is used to study the physics of carbon oxidation in carbon silicon carbide composites.
Imaging of human finger nail-fold with MHz A-scan rate swept source optical coherence tomography
NASA Astrophysics Data System (ADS)
Poddar, Raju; Mondal, Indranil
2018-07-01
We present a non-invasive three-dimensional depth-resolved micro-structure and micro-vasculature imaging of a human fingernail-fold with a swept-source optical coherence tomography (ssOCT) system at a 1064 nm center wavelength. A phase variance OCT angiography (OCTA) method was implemented for motion contrast OCT imaging. A Fourier-domain mode-locked light source with an A-scan rate of 1.7 MHz (1 700 000 A-scans s‑1) was utilized for imaging. The experimental setup demonstrates OCT and OCTA imaging with an area of ~5 mm × 5 mm (within the Nyquist limit). Details of the ssOCTA system such as system parameters, scanning protocols, acquisition time, challenges, and scanning density are discussed. The selected features of the nail-fold structure and vascular networks are also deliberated. The system has potential for real-time monitoring of transdermal drug delivery, and the management and diagnosis of various diseases such as connective tissue diseases and Raynaud’s phenomenon.
Layer-based buffer aware rate adaptation design for SHVC video streaming
NASA Astrophysics Data System (ADS)
Gudumasu, Srinivas; Hamza, Ahmed; Asbun, Eduardo; He, Yong; Ye, Yan
2016-09-01
This paper proposes a layer based buffer aware rate adaptation design which is able to avoid abrupt video quality fluctuation, reduce re-buffering latency and improve bandwidth utilization when compared to a conventional simulcast based adaptive streaming system. The proposed adaptation design schedules DASH segment requests based on the estimated bandwidth, dependencies among video layers and layer buffer fullness. Scalable HEVC video coding is the latest state-of-art video coding technique that can alleviate various issues caused by simulcast based adaptive video streaming. With scalable coded video streams, the video is encoded once into a number of layers representing different qualities and/or resolutions: a base layer (BL) and one or more enhancement layers (EL), each incrementally enhancing the quality of the lower layers. Such layer based coding structure allows fine granularity rate adaptation for the video streaming applications. Two video streaming use cases are presented in this paper. The first use case is to stream HD SHVC video over a wireless network where available bandwidth varies, and the performance comparison between proposed layer-based streaming approach and conventional simulcast streaming approach is provided. The second use case is to stream 4K/UHD SHVC video over a hybrid access network that consists of a 5G millimeter wave high-speed wireless link and a conventional wired or WiFi network. The simulation results verify that the proposed layer based rate adaptation approach is able to utilize the bandwidth more efficiently. As a result, a more consistent viewing experience with higher quality video content and minimal video quality fluctuations can be presented to the user.
A Mass Balance-Based Semiparametric Approach to Evaluate Neonatal Erythropoiesis.
Kuruvilla, Denison J; Widness, John A; Nalbant, Demet; Schmidt, Robert L; Mock, Donald M; Veng-Pedersen, Peter
2016-01-01
Postnatal hemoglobin (Hb) production in anemic preterm infants is determined by several factors including the endogenous erythropoietin levels, allogeneic RBC transfusions administered to treat anemia, and developmental age. As a result, their postnatal Hb production rate can vary considerably. This work introduces a novel Hb mass balance-based semiparametric approach that utilizes infant blood concentrations of Hb from the first 30 postnatal days to estimate the amount of Hb produced and the erythropoiesis rate in newborn infants. The proposed method has the advantage of not relying on specific structural pharmacodynamic model assumptions to describe the Hb production, but instead utilizes simple mass balance principles and nonparametric regression analysis. The developed method was applied to the Hb data from 79 critically ill anemic very low birth weight preterm infants to evaluate the dynamic changes in erythropoiesis during the first month of life and to determine the inter-subject variability in Hb production. The estimated mean (±SD) cumulative amount of Hb produced by the infants over the first month of life was 6.6 ± 3.4 g (mean body weight, 0.768 kg), and the mean estimated body weight-scaled Hb production rate over the same period was 0.23 ± 0.12 g/day/kg. A significant positive correlation was observed between infant gestational age and the mean body weight-scaled Hb production rate over the first month of life (P < 0.05). We conclude that the proposed mathematical approach and its implementation provide a flexible framework to evaluate postnatal erythropoiesis in newborn infants.
Barber, Emma L; Dusetzina, Stacie B; Stitzenberg, Karyn B; Rossi, Emma C; Gehrig, Paola A; Boggess, John F; Garrett, Joanne M
2017-06-01
To estimate variation in the use of neoadjuvant chemotherapy by high volume hospitals and to determine the association between hospital utilization of neoadjuvant chemotherapy and survival. We identified incident cases of stage IIIC or IV epithelial ovarian cancer in the National Cancer Database from 2006 to 2012. Inclusion criteria were treatment at a high volume hospital (>20 cases/year) and treatment with both chemotherapy and surgery. A logistic regression model was used to predict receipt of neoadjuvant chemotherapy based on case-mix predictors (age, comorbidities, stage etc). Hospitals were categorized by the observed-to-expected ratio for neoadjuvant chemotherapy use as low, average, or high utilization hospitals. Survival analysis was performed. We identified 11,574 patients treated at 55 high volume hospitals. Neoadjuvant chemotherapy was used for 21.6% (n=2494) of patients and use varied widely by hospital, from 5%-55%. High utilization hospitals (n=1910, 10 hospitals) had a median neoadjuvant chemotherapy rate of 39% (range 23-55%), while low utilization hospitals (n=2671, 14 hospitals) had a median rate of 10% (range 5-17%). For all ovarian cancer patients adjusting for clinical and socio-demographic factors, treatment at a hospital with average or high neoadjuvant chemotherapy utilization was associated with a decreased rate of death compared to treatment at a low utilization hospital (HR 0.90 95% CI 0.83-0.97 and HR 0.85 95% CI 0.75-0.95). Wide variation exists in the utilization of neoadjuvant chemotherapy to treat stage IIIC and IV epithelial ovarian cancer even among high volume hospitals. Patients treated at hospitals with low rates of neoadjuvant chemotherapy utilization experience decreased survival. Copyright © 2017 Elsevier Inc. All rights reserved.
Barber, Emma L; Dusetzina, Stacie B; Stitzenberg, Karyn B; Rossi, Emma C; Gehrig, Paola A; Boggess, John F; Garrett, Joanne M
2017-01-01
Objective To estimate variation in the use of neoadjuvant chemotherapy by high volume hospitals and to determine the association between hospital utilization of neoadjuvant chemotherapy and survival. Methods We identified incident cases of stage IIIC or IV epithelial ovarian cancer in the National Cancer Database from 2006–2012. Inclusion criteria were treatment at a high volume hospital (>20 cases/yr) and treatment with both chemotherapy and surgery. A logistic regression model was used to predict receipt of neoadjuvant chemotherapy based on case-mix predictors (age, comorbidities, stage etc). Hospitals were categorized by the observed-to-expected ratio for neoadjuvant chemotherapy use as low, average, or high utilization hospitals. Survival analysis was performed. Results We identified 11,574 patients treated at 55 high volume hospitals. Neoadjuvant chemotherapy was used for 21.6% (n=2494) of patients and use varied widely by hospital, from 5%–55%. High utilization hospitals (n=1910, 10 hospitals) had a median neoadjuvant chemotherapy rate of 39% (range 23–55%), while low utilization hospitals (n=2671, 14 hospitals) had a median rate of 10% (range 5–17%). For all ovarian cancer patients adjusting for clinical and socio-demographic factors, treatment at a hospital with average or high neoadjuvant chemotherapy utilization was associated with a decreased rate of death compared to treatment at a low utilization hospital (HR 0.90 95%CI 0.83–0.97 and HR 0.85 95%CI 0.75–0.95). Conclusions Wide variation exists in the utilization of neoadjuvant chemotherapy to treat stage IIIC and IV epithelial ovarian cancer even among high volume hospitals. Patients treated at hospitals with low rates of neoadjuvant chemotherapy utilization experience decreased survival. PMID:28366545
1986-04-01
In this final rule we are adopting an apportionment methodology for determining reasonable cost reimbursement for hospital malpractice insurance costs. The new apportionment policy for hospitals will divide total malpractice insurance premium cost into two components. The "administrative component," which accounts for 8.5 percent of total premium cost, will be included in the General and Administrative cost center and will be apportioned on the basis of the individual hospital's Medicare utilization rate. The "risk component," which comprises 91.5 percent of total cost, will be apportioned on the basis of a formula that takes into account the individual hospital's utilization as well as the national Medicare patient utilization rate and the national Medicare malpractice loss ratio (as adjusted to account for associated claims handling costs). Effectively, the "scaling factor formula" will relate the national utilization rate to the adjusted national loss ratio. As a hospital's own utilization rate exceeds or falls below the national utilization rate, the risk component will be reimbursed on the basis of a "scaling factor" that is more or less than the national Medicare malpractice loss ratio. Different apportionment policies are being adopted for Medicare skilled nursing facilities and for providers of services under the Medicaid and Maternal and Child Health programs. This final rule replaces our current apportionment policy for reimbursement of malpractice insurance costs and is applicable, subject to the rules of reopening and administrative finality, to cost reporting periods beginning on or after July 1, 1979.
Acetate transport and utilization in the rat brain.
Deelchand, Dinesh K; Shestov, Alexander A; Koski, Dee M; Uğurbil, Kâmil; Henry, Pierre-Gilles
2009-05-01
Acetate, a glial-specific substrate, is an attractive alternative to glucose for the study of neuronal-glial interactions. The present study investigates the kinetics of acetate uptake and utilization in the rat brain in vivo during infusion of [2-13C]acetate using NMR spectroscopy. When plasma acetate concentration was increased, the rate of brain acetate utilization (CMR(ace)) increased progressively and reached close to saturation for plasma acetate concentration > 2-3 mM, whereas brain acetate concentration continued to increase. The Michaelis-Menten constant for brain acetate utilization (K(M)(util) = 0.01 +/- 0.14 mM) was much smaller than for acetate transport through the blood-brain barrier (BBB) (K(M)(t) = 4.18 +/- 0.83 mM). The maximum transport capacity of acetate through the BBB (V(max)(t) = 0.96 +/- 0.18 micromol/g/min) was nearly twofold higher than the maximum rate of brain acetate utilization (V(max)(util) = 0.50 +/- 0.08 micromol/g/min). We conclude that, under our experimental conditions, brain acetate utilization is saturated when plasma acetate concentrations increase above 2-3 mM. At such high plasma acetate concentration, the rate-limiting step for glial acetate metabolism is not the BBB, but occurs after entry of acetate into the brain.
Walley, Alexander Y; Paasche-Orlow, Michael; Lee, Eugene C; Forsythe, Shaula; Chetty, Veerappa K; Mitchell, Suzanne; Jack, Brian W
2012-03-01
Hospital discharge may be an opportunity to intervene among patients with substance use disorders to reduce subsequent hospital utilization. This study determined whether having a substance use disorder diagnosis was associated with subsequent acute care hospital utilization. We conducted an observational cohort study among 738 patients on a general medical service at an urban, academic, safety-net hospital. The main outcomes were rate and risk of acute care hospital utilization (emergency department visit or hospitalization) within 30 days of discharge. The main independent variable was presence of a substance use disorder primary or secondary discharge diagnosis code at the index hospitalization. At discharge, 17% of subjects had a substance use disorder diagnosis. These patients had higher rates of recurrent acute care hospital utilization than patients without substance use disorder diagnoses (0.63 vs 0.32 events per subject at 30 days, P < 0.01) and increased risk of any recurrent acute care hospital utilization (33% vs 22% at 30 days, P < 0.05). In adjusted Poisson regression models, the incident rate ratio at 30 days was 1.49 (95% confidence interval, 1.12-1.98) for patients with substance use disorder diagnoses compared with those without. In subgroup analyses, higher utilization was attributable to those with drug diagnoses or a combination of drug and alcohol diagnoses, but not to those with exclusively alcohol diagnoses. Medical patients with substance use disorder diagnoses, specifically those with drug use-related diagnoses, have higher rates of recurrent acute care hospital utilization than those without substance use disorder diagnoses.
ICD Social Codes: An Underutilized Resource for Tracking Social Needs.
Torres, Jacqueline M; Lawlor, John; Colvin, Jeffrey D; Sills, Marion R; Bettenhausen, Jessica L; Davidson, Amber; Cutler, Gretchen J; Hall, Matt; Gottlieb, Laura M
2017-09-01
Social determinants of health (SDH) data collected in health care settings could have important applications for clinical decision-making, population health strategies, and the design of performance-based incentives and penalties. One source for cataloging SDH data is the International Statistical Classification of Diseases and Related Health Problems (ICD). To explore how SDH are captured with ICD Ninth revision SDH V codes in a national inpatient discharge database. Data come from the 2013 Healthcare Cost and Utilization Project (HCUP) National Inpatient Sample, a national stratified sample of discharges from 4363 hospitals from 44 US states. We estimate the rate of ICD-9 SDH V code utilization overall and by patient demographics and payer categories. We additionally estimate the rate of SDH V code utilization for: (a) the 5 most common reasons for hospitalization; and (b) the 5 conditions with the highest rates of SDH V code utilization. Fewer than 2% of overall discharges in the National Inpatient Sample were assigned an SDH V code. There were statistically significant differences in the rate of overall SDH V code utilization by age categories, race/ethnicity, sex, and payer (all P<0.001). Nevertheless, SDH V codes were assigned to <7% of discharges in any demographic or payer subgroup. SDH V code utilization was highest for major diagnostic categories related to mental health and alcohol/substance use-related discharges. SDH V codes are infrequently utilized in inpatient settings for discharges other than those related to mental health and alcohol/substance use. Utilization incentives will likely need to be developed to realize the potential benefits of cataloging SDH information.
Immiscible phase incorporation during directional solidification of hypermonotectics
NASA Technical Reports Server (NTRS)
Andrews, J. Barry; Merrick, Roger A.
1993-01-01
Solidification processes in immiscible samples were investigated by directly observing the events taking place at the solid-liquid interface during directional solidification. Visualization of these events was made possible through the use of a transparent metal analog system and a temperature gradient stage assembly fitted to an optical microscope. The immiscible transparent analog system utilized was the succinonitrile-glycerol system. This system has been shown to exhibit the same morphological transitions as observed in metallic alloys of monotectic composition. Both monotectic and hypermonotectic composition samples were directionally solidified in order to gain an improved understanding of the manner in which the excess hypermonotectic liquid is incorporated into the solidifying structure. The processing conditions utilized prevented sedimentation of the excess hypermonotectic liquid by directionally solidifying the samples in very thin (13 microns), horizontally oriented cells. High thermal gradient to growth rate ratios (G/R) were used in an effort to prevent constitutional supercooling and the subsequent formation of L(sub 2) droplets in advance of the solidification front during the growth of fibrous composite structures. Results demonstrated that hypermonotectic composites could be produced in samples up to two weight percent off of the monotectic composition by using a G/R ratio greater than or equal to 4.6 x 10(exp 4) C(s)/mm(sup 2) to avoid constitutional supercooling. For hypermonotectic samples processed with G/R ratios below 4.6 x 10(exp 4) C(s)/mm(sup 2), constitutional supercooling occurred and resulted in slight interfacial instability. For these samples, two methods of incorporation of the hypermonotectic liquid were observed and are reported. The correlation between the phase spacing, lambda, and the growth rate, R, was examined and was found to obey a relationship generally associated with a diffusion controlled coupled growth process. For samples with compositions ranging from the monotectic composition up to 2 percent off of the monotectic composition, data indicated that the square of the phase spacing (lambda) varied linearly with the inverse of the growth rate (R).
Evaluating Utility Gloves as a Potential Reservoir for Pathogenic Bacteria.
Grant, Kathy L; Naber, E Donald; Halteman, William A
2015-08-01
This pilot study sought to determine the rate and degree to which gram-negative Klebsiella pneumoniae, Escherichia coli and Pseudomonas aeruginosa and gram-positive Staphylococcus aureus occurred on the inside of utility gloves used at University of Maine at Augusta, Dental Health Programs' dental hygiene clinic. Five steam autoclave utility gloves were randomly selected to serve as control and a convenience sample of 10 used utility gloves were selected from the sterilization area. A sample was collected from a predetermined surface area from the inside of each steam autoclave utility glove and used utility glove. Each sample was used to inoculate a Petri plate containing 2 types of culture media. Samples were incubated at 37° C for 30 to 36 hours in aerobic conditions. Colony forming units (CFU) were counted. Confidence intervals (CI) estimated the rate of contamination with gram-negative K. pneumoniae, E. coli and P. aeruginosa on the inside of steam autoclave utility gloves to be n=33 95% CL [0.000, 0.049], used utility gloves to be n=70, 95% CL [0.000, 0.0303]. Data estimated the rate of contamination with gram-positive S. aureus on the inside of steam autoclave utility gloves to be n=35, 95% CL [0.233, 0.530], used utility gloves to be n=70, 95% CL [0.2730, 0.4975]. Culture media expressed a wide range of CFU from 0 to over 200. The risk of utility glove contamination with gram-negative bacteria is likely low. The expressed growth of S. aureus from steam autoclave utility gloves controls raises questions about the effectiveness and safety of generally accepted sterilization standards for the governmentally mandated use of utility gloves. Copyright © 2015 The American Dental Hygienists’ Association.
Brinjikji, W; Rabinstein, A A; McDonald, J S; Cloft, H J
2014-03-01
Previous studies have demonstrated that socioeconomic disparities in the treatment of cerebrovascular diseases exist. We studied a large administrative data base to study disparities in the utilization of mechanical thrombectomy for acute ischemic stroke. With the utilization of the Perspective data base, we studied disparities in mechanical thrombectomy utilization between patient race and insurance status in 1) all patients presenting with acute ischemic stroke and 2) patients presenting with acute ischemic stroke at centers that performed mechanical thrombectomy. We examined utilization rates of mechanical thrombectomy by race/ethnicity (white, black, and Hispanic) and insurance status (Medicare, Medicaid, self-pay, and private). Multivariate logistic regression analysis adjusting for potential confounding variables was performed to study the association between race/insurance status and mechanical thrombectomy utilization. The overall mechanical thrombectomy utilization rate was 0.15% (371/249,336); utilization rate at centers that performed mechanical thrombectomy was 1.0% (371/35,376). In the sample of all patients with acute ischemic stroke, multivariate logistic regression analysis demonstrated that uninsured patients had significantly lower odds of mechanical thrombectomy utilization compared with privately insured patients (OR = 0.52, 95% CI = 0.25-0.95, P = .03), as did Medicare patients (OR = 0.53, 95% CI = 0.41-0.70, P < .0001). Blacks had significantly lower odds of mechanical thrombectomy utilization compared with whites (OR = 0.35, 95% CI = 0.23-0.51, P < .0001). When considering only patients treated at centers performing mechanical thrombectomy, multivariate logistic regression analysis demonstrated that insurance was not associated with significant disparities in mechanical thrombectomy utilization; however, black patients had significantly lower odds of mechanical thrombectomy utilization compared with whites (OR = 0.41, 95% CI = 0.27-0.60, P < .0001). Significant socioeconomic disparities exist in the utilization of mechanical thrombectomy in the United States.
Grade Distribution and Drying Degrade of Sweetgum and Yellow-poplar Structural Lumber
Timothy D. Faust
1990-01-01
The fact that the supply of southern pine timber is changing to include more lower quality plantation stock may provide incentive for utilizing lower density hardwoods for structural lumber. Yellow-poplar and sweetgum are potential substitutes for southern pine. A major problem in utilizing soft hardwoods for structural lumber is the difficulties associated with drying...
Zhu, Shijin; Li, Li; Liu, Jiabin; Wang, Hongtao; Wang, Tian; Zhang, Yuxin; Zhang, Lili; Ruoff, Rodney S; Dong, Fan
2018-02-27
Two-dimensional birnessite has attracted attention for electrochemical energy storage because of the presence of redox active Mn 4+ /Mn 3+ ions and spacious interlayer channels available for ions diffusion. However, current strategies are largely limited to enhancing the electrical conductivity of birnessite. One key limitation affecting the electrochemical properties of birnessite is the poor utilization of the MnO 6 unit. Here, we assemble β-MnO 2 /birnessite core-shell structure that exploits the exposed crystal face of β-MnO 2 as the core and ultrathin birnessite sheets that have the structure advantage to enhance the utilization efficiency of the Mn from the bulk. Our birnessite that has sheets parallel to each other is found to have unusual crystal structure with interlayer spacing, Mn(III)/Mn(IV) ratio and the content of the balancing cations differing from that of the common birnessite. The substrate directed growth mechanism is carefully investigated. The as-prepared core-shell nanostructures enhance the exposed surface area of birnessite and achieve high electrochemical performances (for example, 657 F g -1 in 1 M Na 2 SO 4 electrolyte based on the weight of parallel birnessite) and excellent rate capability over a potential window of up to 1.2 V. This strategy opens avenues for fundamental studies of birnessite and its properties and suggests the possibility of its use in energy storage and other applications. The potential window of an asymmetric supercapacitor that was assembled with this material can be enlarged to 2.2 V (in aqueous electrolyte) with a good cycling ability.
Photon Counting Energy Dispersive Detector Arrays for X-ray Imaging
Iwanczyk, Jan S.; Nygård, Einar; Meirav, Oded; Arenson, Jerry; Barber, William C.; Hartsough, Neal E.; Malakhov, Nail; Wessel, Jan C.
2009-01-01
The development of an innovative detector technology for photon-counting in X-ray imaging is reported. This new generation of detectors, based on pixellated cadmium telluride (CdTe) and cadmium zinc telluride (CZT) detector arrays electrically connected to application specific integrated circuits (ASICs) for readout, will produce fast and highly efficient photon-counting and energy-dispersive X-ray imaging. There are a number of applications that can greatly benefit from these novel imagers including mammography, planar radiography, and computed tomography (CT). Systems based on this new detector technology can provide compositional analysis of tissue through spectroscopic X-ray imaging, significantly improve overall image quality, and may significantly reduce X-ray dose to the patient. A very high X-ray flux is utilized in many of these applications. For example, CT scanners can produce ~100 Mphotons/mm2/s in the unattenuated beam. High flux is required in order to collect sufficient photon statistics in the measurement of the transmitted flux (attenuated beam) during the very short time frame of a CT scan. This high count rate combined with a need for high detection efficiency requires the development of detector structures that can provide a response signal much faster than the transit time of carriers over the whole detector thickness. We have developed CdTe and CZT detector array structures which are 3 mm thick with 16×16 pixels and a 1 mm pixel pitch. These structures, in the two different implementations presented here, utilize either a small pixel effect or a drift phenomenon. An energy resolution of 4.75% at 122 keV has been obtained with a 30 ns peaking time using discrete electronics and a 57Co source. An output rate of 6×106 counts per second per individual pixel has been obtained with our ASIC readout electronics and a clinical CT X-ray tube. Additionally, the first clinical CT images, taken with several of our prototype photon-counting and energy-dispersive detector modules, are shown. PMID:19920884
Photon Counting Energy Dispersive Detector Arrays for X-ray Imaging.
Iwanczyk, Jan S; Nygård, Einar; Meirav, Oded; Arenson, Jerry; Barber, William C; Hartsough, Neal E; Malakhov, Nail; Wessel, Jan C
2009-01-01
The development of an innovative detector technology for photon-counting in X-ray imaging is reported. This new generation of detectors, based on pixellated cadmium telluride (CdTe) and cadmium zinc telluride (CZT) detector arrays electrically connected to application specific integrated circuits (ASICs) for readout, will produce fast and highly efficient photon-counting and energy-dispersive X-ray imaging. There are a number of applications that can greatly benefit from these novel imagers including mammography, planar radiography, and computed tomography (CT). Systems based on this new detector technology can provide compositional analysis of tissue through spectroscopic X-ray imaging, significantly improve overall image quality, and may significantly reduce X-ray dose to the patient. A very high X-ray flux is utilized in many of these applications. For example, CT scanners can produce ~100 Mphotons/mm(2)/s in the unattenuated beam. High flux is required in order to collect sufficient photon statistics in the measurement of the transmitted flux (attenuated beam) during the very short time frame of a CT scan. This high count rate combined with a need for high detection efficiency requires the development of detector structures that can provide a response signal much faster than the transit time of carriers over the whole detector thickness. We have developed CdTe and CZT detector array structures which are 3 mm thick with 16×16 pixels and a 1 mm pixel pitch. These structures, in the two different implementations presented here, utilize either a small pixel effect or a drift phenomenon. An energy resolution of 4.75% at 122 keV has been obtained with a 30 ns peaking time using discrete electronics and a (57)Co source. An output rate of 6×10(6) counts per second per individual pixel has been obtained with our ASIC readout electronics and a clinical CT X-ray tube. Additionally, the first clinical CT images, taken with several of our prototype photon-counting and energy-dispersive detector modules, are shown.
NASA Astrophysics Data System (ADS)
Abaskharon, Rachel M.
As ubiquitous and diverse biopolymers, proteins are dynamic molecules that are constantly engaging in inter- and intramolecular interactions responsible for their structure, fold, and function. Because of this, gaining a comprehensive understanding of the factors that control protein conformation and dynamics remains elusive as current experimental techniques often lack the ability to initiate and probe a specific interaction or conformational transition. For this reason, this thesis aims to develop methods to control and monitor protein conformations, conformational transitions, and dynamics in a site-specific manner, as well as to understand how specific and non-specific interactions affect the protein folding energy landscape. First, by using the co-solvent, trifluoroethanol (TFE), we show that the rate at which a peptide folds can be greatly impacted and thus controlled by the excluded volume effect. Secondly, we demonstrate the utility of several light-responsive molecules and reactions as methods to manipulate and investigate protein-folding processes. Using an azobenzene linker as a photo-initiator, we are able to increase the folding rate of a protein system by an order of magnitude by channeling a sub-population through a parallel, faster folding pathway. Additionally, we utilize a tryptophan-mediated electron transfer process to a nearby disulfide bond to strategically unfold a protein molecule with ultraviolet light. We also demonstrate the potential of two ruthenium polypyridyl complexes as ultrafast phototriggers of protein reactions. Finally, we develop several site-specific spectroscopic probes of protein structure and environment. Specifically, we demonstrate that a 13C-labeled aspartic acid residue constitutes a useful site-specific infrared probe for investigating salt-bridges and hydration dynamics of proteins, particularly in proteins containing several acidic amino acids. We also show that a proline-derivative, 4-oxoproline, possesses novel infrared properties that can be exploited to monitor the cis-trans isomerization process of individual proline residues in proteins.
NASA Astrophysics Data System (ADS)
Branicio, Paulo S.; Bai, Kewu; Ramanarayan, H.; Wu, David T.; Sullivan, Michael B.; Srolovitz, David J.
2018-04-01
The complete process of amorphization and crystallization of the phase-change material G e2S b2T e5 is investigated using nanosecond ab initio molecular dynamics simulations. Varying the quench rate during the amorphization phase of the cycle results in the generation of a variety of structures from entirely crystallized (-0.45 K/ps) to entirely amorphized (-16 K/ps). The 1.5-ns annealing simulations indicate that the crystallization process depends strongly on both the annealing temperature and the initial amorphous structure. The presence of crystal precursors (square rings) in the amorphous matrix enhances nucleation/crystallization kinetics. The simulation data are used to construct a combined continuous-cooling-transformation (CCT) and temperature-time-transformation (TTT) diagram. The nose of the CCT-TTT diagram corresponds to the minimum time for the onset of homogenous crystallization and is located at 600 K and 70 ps. That corresponds to a critical cooling rate for amorphization of -4.5 K/ps. The results, in excellent agreement with experimental observations, suggest that a strategy that utilizes multiple quench rates and annealing temperatures may be used to effectively optimize the reversible switching speed and enable fast and energy-efficient phase-change memories.
Su, Pingru; Zhu, Huicen; Shen, Zhemin
2016-02-01
Manganese dioxide formed in oxidation process by potassium permanganate exhibits promising adsorptive capacity which can be utilized to remove organic pollutants in wastewater. However, the structure variances of organic molecules lead to wide difference of adsorption efficiency. Therefore, it is of great significance to find a general relationship between removal rate of organic compounds and their quantum parameters. This study focused on building up quantitative structure activity relationship (QSAR) models based on experimental removal rate (r(exp)) of 25 organic compounds and 17 quantum parameters of each organic compounds computed by Gaussian 09 and Material Studio 6.1. The recommended model is rpre = -0.502-7.742 f(+)x + 0.107 E HOMO + 0.959 q(H(+)) + 1.388 BOx. Both internal and external validations of the recommended model are satisfied, suggesting optimum stability and predictive ability. The definition of applicability domain and the Y-randomization test indicate all the prediction is reliable and no possibility of chance correlation. The recommended model contains four variables, which are closely related to adsorption mechanism. f(+)x reveals the degree of affinity for nucleophilic attack. E HOMO represents the difficulty of electron loss. q(H(+)) reflect the distribution of partial charge between carbon and hydrogen atom. BO x shows the stability of a molecule.
Paper recycling framework, the "Wheel of Fiber".
Ervasti, Ilpo; Miranda, Ruben; Kauranen, Ilkka
2016-06-01
At present, there is no reliable method in use that unequivocally describes paper industry material flows and makes it possible to compare geographical regions with each other. A functioning paper industry Material Flow Account (MFA) that uses uniform terminology and standard definitions for terms and structures is necessary. Many of the presently used general level MFAs, which are called frameworks in this article, stress the importance of input and output flows but do not provide a uniform picture of material recycling. Paper industry is an example of a field in which recycling plays a key role. Additionally, terms related to paper industry recycling, such as collection rate, recycling rate, and utilization rate, are not defined uniformly across regions and time. Thus, reliably comparing material recycling activity between geographical regions or calculating any regional summaries is difficult or even impossible. The objective of this study is to give a partial solution to the problem of not having a reliable method in use that unequivocally describes paper industry material flows. This is done by introducing a new material flow framework for paper industry in which the flow and stage structure supports the use of uniform definitions for terms related to paper recycling. This new framework is termed the Detailed Wheel of Fiber. Copyright © 2016 Elsevier Ltd. All rights reserved.
Dental Homes for Children With Autism: A Longitudinal Analysis of Iowa Medicaid's I-Smile Program.
Chi, Donald L; Momany, Elizabeth T; Mancl, Lloyd A; Lindgren, Scott D; Zinner, Samuel H; Steinman, Kyle J
2016-05-01
Medicaid-enrolled children with autism spectrum disorder (ASD) encounter significant barriers to dental care. Iowa's I-Smile Program was implemented in 2006 to improve dental use for all children in Medicaid. This study compared dental home and preventive dental utilization rates for Medicaid-enrolled children by ASD status and within three time periods (pre-implementation, initial implementation, maturation) and determined I-Smile's longitudinal influence on ASD-related dental use disparities. Data from 2002-2011 were analyzed for newly Medicaid-enrolled children aged 3-17 years (N=30,059); identified each child's ASD status; and assessed whether the child had a dental home or utilized preventive dental care. Log-linear regression models were used to generate rate ratios. Analyses were conducted in 2015. In 2003-2011, 9.8% of children with ASD had dental homes compared with 8% of children without ASD; 36.3% of children with ASD utilized preventive care compared to 45.7% of children without ASD. There were no significant differences in dental home rates by ASD status during pre-implementation, initial implementation, or maturation. There were no significant differences in preventive dental utilization by ASD status during pre-implementation or initial implementation, but children with ASD were significantly less likely to utilize preventive care during maturation (rate ratio=0.79, p<0.001). Longitudinal trends in dental home and preventive dental utilization rates were not significant (p=0.54 and p=0.71, respectively). Among newly Medicaid-enrolled children in Iowa's I-Smile Program, those with ASDs were not less likely than those without ASD to have dental homes but were significantly less likely to utilize preventive dental care. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.
Dental Homes for Children With Autism
Chi, Donald L.; Momany, Elizabeth T.; Mancl, Lloyd A.; Lindgren, Scott D.; Zinner, Samuel H.; Steinman, Kyle J.
2015-01-01
Introduction Medicaid-enrolled children with autism spectrum disorder (ASD) encounter significant barriers to dental care. Iowa’s I-Smile Program was implemented in 2006 to improve dental use for all children in Medicaid. This study compared dental home and preventive dental utilization rates for Medicaid-enrolled children by ASD status and within three time periods (pre-implementation, initial implementation, maturation) and determined I-Smile’s longitudinal influence on ASD-related dental use disparities. Methods Data from 2002–2011 were analyzed for newly Medicaid-enrolled children aged 3–17 years (N=30,059), identified each child’s ASD status, and assessed whether the child had a dental home or utilized preventive dental care. Log-linear regression models were used to generate rate ratios. Analyses were conducted in 2015. Results In 2003–2011, 9.8% of children with ASD had dental homes compared with 8% of children without ASD; 36.3% of children with ASD utilized preventive care compared to 45.7% of children without ASD. There were no significant differences in dental home rates by ASD status during pre-implementation, initial implementation, or maturation. There were no significant differences in preventive dental utilization by ASD status during pre-implementation or initial implementation, but children with ASD were significantly less likely to utilize preventive care during maturation (rate ratio=0.79, p<0.001). Longitudinal trends in dental home and preventive dental utilization rates were not significant (p=0.54 and p=0.71, respectively). Conclusions Among newly Medicaid-enrolled children in Iowa’s I-Smile Program, those with ASDs were not less likely than those without ASD to have dental homes but were significantly less likely to utilize preventive dental care. PMID:26514624
Goodarzi, M; Safaei, M R; Oztop, Hakan F; Karimipour, A; Sadeghinezhad, E; Dahari, M; Kazi, S N; Jomhari, N
2014-01-01
The effect of radiation on laminar and turbulent mixed convection heat transfer of a semitransparent medium in a square enclosure was studied numerically using the Finite Volume Method. A structured mesh and the SIMPLE algorithm were utilized to model the governing equations. Turbulence and radiation were modeled with the RNG k-ε model and Discrete Ordinates (DO) model, respectively. For Richardson numbers ranging from 0.1 to 10, simulations were performed for Rayleigh numbers in laminar flow (10⁴) and turbulent flow (10⁸). The model predictions were validated against previous numerical studies and good agreement was observed. The simulated results indicate that for laminar and turbulent motion states, computing the radiation heat transfer significantly enhanced the Nusselt number (Nu) as well as the heat transfer coefficient. Higher Richardson numbers did not noticeably affect the average Nusselt number and corresponding heat transfer rate. Besides, as expected, the heat transfer rate for the turbulent flow regime surpassed that in the laminar regime. The simulations additionally demonstrated that for a constant Richardson number, computing the radiation heat transfer majorly affected the heat transfer structure in the enclosure; however, its impact on the fluid flow structure was negligible.
Goodarzi, M.; Safaei, M. R.; Oztop, Hakan F.; Karimipour, A.; Sadeghinezhad, E.; Dahari, M.; Kazi, S. N.; Jomhari, N.
2014-01-01
The effect of radiation on laminar and turbulent mixed convection heat transfer of a semitransparent medium in a square enclosure was studied numerically using the Finite Volume Method. A structured mesh and the SIMPLE algorithm were utilized to model the governing equations. Turbulence and radiation were modeled with the RNG k-ε model and Discrete Ordinates (DO) model, respectively. For Richardson numbers ranging from 0.1 to 10, simulations were performed for Rayleigh numbers in laminar flow (104) and turbulent flow (108). The model predictions were validated against previous numerical studies and good agreement was observed. The simulated results indicate that for laminar and turbulent motion states, computing the radiation heat transfer significantly enhanced the Nusselt number (Nu) as well as the heat transfer coefficient. Higher Richardson numbers did not noticeably affect the average Nusselt number and corresponding heat transfer rate. Besides, as expected, the heat transfer rate for the turbulent flow regime surpassed that in the laminar regime. The simulations additionally demonstrated that for a constant Richardson number, computing the radiation heat transfer majorly affected the heat transfer structure in the enclosure; however, its impact on the fluid flow structure was negligible. PMID:24778601
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lampley, C.M.
1981-01-01
This report describes many of the computational methods employed within the SKYSHINE-II program. A brief description of the new data base is included, as is a description of the input data requirements and formats needed to properly execute a SKYSHINE-II problem. Utilization instructions for the program are provided for operation of the SKYSHINE-II Code on the Brookhaven National Laboratory Central Scientific Computing Facility (See NUREG/CR-0781, RRA-T7901 for complete information).
Flexible All-Digital Receiver for Bandwidth Efficient Modulations
NASA Technical Reports Server (NTRS)
Gray, Andrew; Srinivasan, Meera; Simon, Marvin; Yan, Tsun-Yee
2000-01-01
An all-digital high data rate parallel receiver architecture developed jointly by Goddard Space Flight Center and the Jet Propulsion Laboratory is presented. This receiver utilizes only a small number of high speed components along with a majority of lower speed components operating in a parallel frequency domain structure implementable in CMOS, and can currently process up to 600 Mbps with standard QPSK modulation. Performance results for this receiver for bandwidth efficient QPSK modulation schemes such as square-root raised cosine pulse shaped QPSK and Feher's patented QPSK are presented, demonstrating the flexibility of the receiver architecture.
Foamed Cement Interactions with CO 2
DOE Office of Scientific and Technical Information (OSTI.GOV)
Verba, Circe; Montross, Scott; Spaulding, Richard
2017-02-02
Geologic carbon storage (GCS) is a potentially viable strategy to reduce greenhouse emissions. Understanding the risks to engineered and geologic structures associated with GCS is an important first step towards developing practices for safe and effective storage. The widespread utilization of foamed cement in wells may mean that carbon dioxide (CO 2)/brine/foamed cement reactions may occur within these GCS sites. Characterizing the difference in alteration rates as well as the physical and mechanical impact of CO 2/brine/foamed cement is an important preliminary step to ensuring offshore and onshore GCS is a prudent anthropogenic CO 2 mitigation choice.
Magnetic Resonance Imaging and Arthroscopic Correlation in Shoulder Instability.
Knapik, Derrick M; Voos, James E
2017-12-01
The shoulder is the most inherently unstable joint in the body, prone to high rates of anterior dislocations with subsequent injuries to soft tissue and bony stabilizing structures, resulting in recurrent shoulder instability. Advanced imaging utilizing magnetic resonance (MR) imaging and MR arthrography allows for thorough evaluation of lesions present in the unstable shoulder and is critical for preoperative planning. Arthroscopic shoulder stabilization in the appropriately selected patient can help restore stability and function. This review highlights correlations between MR imaging and arthroscopy of the most commonly reported soft tissue and bony injuries present in patients with shoulder instability.
Generation of 21.3 Gbaud 8PSK signal using an SOA-based all-optical phase modulator.
Dailey, J M; Webb, R P; Manning, R J
2011-12-12
We describe a novel SOA-based all-optical pure-phase modulator, and show how deleterious cross-gain modulation from the SOAs can be suppressed by utilizing an integrated interferometer structure. We experimentally demonstrate the use of the optical gate as a π/4 phase modulator producing 21.3 Gbaud 8PSK from 21.3 Gbit/s OOK and 21.3 Gbaud QPSK inputs. The modulator produces 3 dB of gain and coherent detection-based bit error rate measurements indicate a 2.4 dB excess penalty. © 2011 Optical Society of America
1983-07-18
architecture . Design , performance, and cost of BRISC is presented. Performance is shown to be better than high end mainframes such as the IBM 3081 and Amdahl 470V/8 on integer benchmarks written in C, Pascal and LISP. The cost, conservatively estimated to be $132,400 is about the same as a high end minicomputer such as the VAX-11/780. BRISC has a CPU cycle time of 46 ns, providing a RISC I instruction execution rate of greater than 15 MIPs. BRISC is designed with a Structured Computer Aided Logic Design System (SCALD) by Valid Logic Systems. An evaluation of the utility of
U.S. Refining Capacity Utilization
1995-01-01
This article briefly reviews recent trends in domestic refining capacity utilization and examines in detail the differences in reported crude oil distillation capacities and utilization rates among different classes of refineries.
1980-12-01
career retention rates , and to predict future career retention rates in the Navy. The statistical model utilizes economic variables as predictors...The model developed r has a high correlation with Navy career retention rates . The problem of Navy career retention has not been adequately studied, 0D...findings indicate Navy policymakers must be cognizant of the relationships of economic factors to Navy career retention rates . Accrzsiofl ’or NTIS GRA&I
Health care resource utilization in adults with congenital heart disease.
Mackie, Andrew S; Pilote, Louise; Ionescu-Ittu, Raluca; Rahme, Elham; Marelli, Ariane J
2007-03-15
The number of adults with congenital heart disease (CHD) is increasing. However, rates of health care resource utilization in this population are unknown. The objectives of this study were to describe the use of general health care resources in adults with CHD and to examine the impact of CHD severity on resource utilization. The study consisted of adults alive in 1996 who had > or = 1 diagnosis of a CHD lesion conforming to the International Classification of Disease, Ninth Revision, in the physician's claims database of the province of Quebec from 1983 to 2000. From 1996 to 2000, rates of health care utilization were measured. The impact of the severity of CHD on the use of health care resources was determined using multivariate models to adjust for age, gender, Charlson co-morbidity score, and duration of follow-up. The study population consisted of 22,096 adults with CHD (42% men). From 1996 to 2000, 87% received outpatient care from specialists, 68% visited emergency rooms, 51% were hospitalized, and 16% were admitted to critical care units. Patients with severe CHD had higher adjusted rates of outpatient cardiologist care (rate ratio [RR] 2.24, 95% confidence interval [CI] 2.06 to 2.45), emergency department utilization (RR 1.09, 95% CI 1.03 to 1.17), hospitalization (RR 1.30, 95% CI 1.19 to 1.43), and days in critical care (RR 2.12, 95% CI 1.80 to 2.50) than patients with other congenital cardiac lesions. Hospitalization rates were higher than in the general Quebec adult population (RR 2.08, 95% CI 2.00 to 2.17). In conclusion, adults with CHD have high rates of health care resource utilization, particularly those with severe lesions. Appropriate resource allocation is required to serve this growing population.
Dieke, Ada C; Zhang, Yujia; Kissin, Dmitry M; Barfield, Wanda D; Boulet, Sheree L
2017-06-01
Disparities in infertility and access to infertility treatments, such as assisted reproductive technology (ART), by race/ethnicity, have been reported. However, identifying disparities in ART usage may have been hampered by missing race/ethnicity information in ART surveillance. We review infertility prevalence and treatment disparities, use recent data to examine ART use in the United States by race/ethnicity and residency in states with mandated insurance coverage for in vitro fertilization (IVF), and discuss approaches for reducing disparities. We used 2014 National ART Surveillance System (NASS) data to calculate rates of ART procedures per million women 15-44 years of age, a proxy measure of ART utilization, for Census-defined racial/ethnic groups in the United States; rates were further stratified by the presence of insurance mandates for IVF treatment. Missing race/ethnicity data (35.6% of cycles) were imputed. Asian/Pacific Islander (A/PI) women had the highest rates of ART utilization at 5883 ART procedures per million women 15-44 years of age in 2014, whereas American Indian/Alaska Native non-Hispanic women had the lowest rates at 807 per million, compared with other racial/ethnic groups. In each racial/ethnic category, ART utilization rates were higher for women in states with an insurance mandate for IVF treatment versus those without. In 2014, A/PI women had the highest rates of ART utilization. ART utilization for all racial/ethnic groups was higher in states with insurance mandates for IVF than those without, although disparities were still evident. Although mandates may increase access to infertility treatments, they are not sufficient to eliminate these disparities.
Müller, Heinz
1989-01-01
During extensive field surveys in central and eastern Europe, 21 herbivorous root insect species were found on Centaurea maculosa ssp. rhenana Boreau, 12 species on C. diffusa Lam. and 11 species on C. vallesiaca Jordan, representing 12 families in 4 orders. The large geographic distribution (species-area function), the high number of Centaurea spp. present (host speciation rate), and the high apparency of the rosettes and the rich food resources offered by the roots during winter, together with their poor accessibility, correlate with the high number of specialist feeders associated with the roots of C. maculosa and C. diffusa. The members of the taxonomically diverse root entomofauna exploit specific structures of the tap root (food niches). Interspecific competition among members of food niches, as well as species-specific responses to different phenological stages (for oviposition) and tissues (for larval development) are thought to be responsible for the high predictability in guild structure. The relatively low levels of host plant attack (two thirds of the roots were unattacked) and the fact that food niches remained unoccupied in most of the regions suggest, however, that the majority of the studied guilds do not represent equilibrium assemblages. Ecological (different habitats), climatic (transitional zone) and historical (ancient pre-Pleistocene communities) factors could account for the highest values of species diversity, infestation levels, species packing and food niche utilization, which are found on C. maculosa in E. Austria/NW. Hungary, compared to other regions. A positive correlation between species packing (number of root-feeding species per population) and infestation rates (percent of roots attacked) was only found for the more stable, semi-natural habitats. A comparative analysis of the regional root insect guilds of C. maculosa with corresponding data for the phytophagous insects associated with the flower heads revealed distinct taxonomical differences, but a high degree of numerical and structural similarity. The different geographical regions are similarly ranked for host plant attack, herbivore pressure, average species packing and level of food niche utilization.
[Public hospital utilization by the foreign population in Aragon, Spain (2004-2007)].
Ben Cheikh, Wafa; Abad, José María; Arribas, Federico; Andrés, Eva; Rabanaque, María José
2011-01-01
To describe hospitalization rates and hospital morbidity among the foreign population residing in Aragon (Spain) by country of birth, between 2004 and 2007, and to compare these rates with those in the autochthonous population. A retrospective longitudinal study was carried out of hospital discharges of the foreign population in public hospitals in Aragon. Utilization rates were estimated by sex, age, country of birth and main diagnosis. Poisson regression was used to estimate the utilization rate ratios and their 95% confidence intervals. Hospitalization rates were lower in the foreign population (adjusted RR: 0.52; 95% CI: 0.51-0.56), except in women aged between 15 and 24 years (RR: 2.9; 95% CI: 2.8-3.0) and among those born in the Maghreb (RR: 1.8; 95% CI: 1.7; 1.9), sub-Saharan Africa (RR: 2.0; 95% CI: 1.9-2.1) and Asia (RR=1.4; 95% CI: 1.3-1.6). When hospital discharges related to obstetrics and gynecology were excluded, only women born in sub-Saharan Africa continued to have adjusted RR greater than 1. These women had higher hospitalization rates in groups of infectious and parasitic diseases (RR: 2.5) and blood and blood-forming organs (RR: 2.8). In Aragon (Spain), public hospital utilization is lower in foreigners than in the autochthonous population. The diseases treated varied by country of birth. The diseases prevalent in these countries, together with hereditary diseases, can increase hospital utilization rates. Copyright © 2010 SESPAS. Published by Elsevier Espana. All rights reserved.
Cogeneration deferral rate and preemption under PURPA: a legal note
DOE Office of Scientific and Technical Information (OSTI.GOV)
Spiewak, S.
The Public Utility Regulatory Policies Act (PURPA) is designed to benefit the ratepayer by using utility facilities as efficiently as possible. It does not ask states to encourage cogeneration or small power projects at the expense of utility efficiency. A legal analysis of the wording of PURPA shows that a deferral rate designed to retain customers who would otherwise turn to cogeneration or independent power supplies is legally consistent with PURPA's intent.
Cooling Rate Determination in Additively Manufactured Aluminum Alloy 2219
NASA Astrophysics Data System (ADS)
Brice, Craig A.; Dennis, Noah
2015-05-01
Metallic additive manufacturing processes generally utilize a conduction mode, welding-type approach to create beads of deposited material that can be arranged into a three-dimensional structure. As with welding, the cooling rates in the molten pool are relatively rapid compared to traditional casting techniques. Determination of the cooling rate in the molten pool is critical for predicting the solidified microstructure and resultant properties. In this experiment, wire-fed electron beam additive manufacturing was used to melt aluminum alloy 2219 under different thermal boundary conditions. The dendrite arm spacing was measured in the remelted material, and this information was used to estimate cooling rates in the molten pool based on established empirical relationships. The results showed that the thermal boundary conditions have a significant effect on the resulting cooling rate in the molten pool. When thermal conduction is limited due to a small thermal sink, the dendrite arm spacing varies between 15 and 35 µm. When thermal conduction is active, the dendrite arm spacing varies between 6 and 12 µm. This range of dendrite arm spacing implies cooling rates ranging from 5 to 350 K/s. Cooling rates can vary greatly as thermal conditions change during deposition. A cooling rate at the higher end of the range could lead to significant deviation from microstructural equilibrium during solidification.
Angore, Banchalem Nega; Tufa, Efrata Girma; Bisetegen, Fithamlak Solomon
2018-04-19
Reducing maternal mortality and improving maternal health care through increased utilization of postnatal care utilization is a global and local priority. However studies that have been carried out in Ethiopia regarding determinants are limited. So This study aims to assess the magnitude of postnatal care utilization and its determinants in Debre Birhan Town, North Ethiopia. A community-based cross-sectional study was conducted from March 1 to April 25, 2015, in Debre Birhan Town. Data were collected through face-to-face interviews using structured pre-tested questionnaires. The data were entered and cleaned in Epi Info version 3.5 and analyzed using SPSS version 20. Bivariate and multiple logistic regression analyses were used. Variable with p value less than or equal to 0.2 at bivariate analysis were entered into multiple logistic regression. Significance was declared at 0.05 in multiple logistic regressions and considered to be an independent factor. From the total respondents, we found that 327 (83.3%) mothers utilized the postnatal care services. Single mothers were less likely to utilize postnatal care services than those mothers who are married and live together [adjusted odds ratio (AOR) = 0.06, 95% CI (0.01, 0.45)]. This study revealed that respondent's knowledge about postnatal care services is an important predictor of postnatal care utilization [AOR = 0.03, 95% CI (0.00, 0.44)] and mothers who delivered in a health care facility were more likely to receive PNC than mothers who did not deliver in a health care facility [AOR = 0.65, 95% CI (0.58, 0.94)]. The postnatal care utilization rate in Debre Birhan town was 83.3%. Marital status, maternal knowledge, and place of delivery were predictors of postnatal care service utilization. So specific attention should be directed towards the improvement of women's education since the perception of the need for PNC services were positively correlated with the mother's education.
A performance study of the time-varying cache behavior: a study on APEX, Mantevo, NAS, and PARSEC
Siddique, Nafiul A.; Grubel, Patricia A.; Badawy, Abdel-Hameed A.; ...
2017-09-20
Cache has long been used to minimize the latency of main memory accesses by storing frequently used data near the processor. Processor performance depends on the underlying cache performance. Therefore, significant research has been done to identify the most crucial metrics of cache performance. Although the majority of research focuses on measuring cache hit rates and data movement as the primary cache performance metrics, cache utilization is significantly important. We investigate the application’s locality using cache utilization metrics. In addition, we present cache utilization and traditional cache performance metrics as the program progresses providing detailed insights into the dynamic applicationmore » behavior on parallel applications from four benchmark suites running on multiple cores. We explore cache utilization for APEX, Mantevo, NAS, and PARSEC, mostly scientific benchmark suites. Our results indicate that 40% of the data bytes in a cache line are accessed at least once before line eviction. Also, on average a byte is accessed two times before the cache line is evicted for these applications. Moreover, we present runtime cache utilization, as well as, conventional performance metrics that illustrate a holistic understanding of cache behavior. To facilitate this research, we build a memory simulator incorporated into the Structural Simulation Toolkit (Rodrigues et al. in SIGMETRICS Perform Eval Rev 38(4):37–42, 2011). Finally, our results suggest that variable cache line size can result in better performance and can also conserve power.« less
A performance study of the time-varying cache behavior: a study on APEX, Mantevo, NAS, and PARSEC
DOE Office of Scientific and Technical Information (OSTI.GOV)
Siddique, Nafiul A.; Grubel, Patricia A.; Badawy, Abdel-Hameed A.
Cache has long been used to minimize the latency of main memory accesses by storing frequently used data near the processor. Processor performance depends on the underlying cache performance. Therefore, significant research has been done to identify the most crucial metrics of cache performance. Although the majority of research focuses on measuring cache hit rates and data movement as the primary cache performance metrics, cache utilization is significantly important. We investigate the application’s locality using cache utilization metrics. In addition, we present cache utilization and traditional cache performance metrics as the program progresses providing detailed insights into the dynamic applicationmore » behavior on parallel applications from four benchmark suites running on multiple cores. We explore cache utilization for APEX, Mantevo, NAS, and PARSEC, mostly scientific benchmark suites. Our results indicate that 40% of the data bytes in a cache line are accessed at least once before line eviction. Also, on average a byte is accessed two times before the cache line is evicted for these applications. Moreover, we present runtime cache utilization, as well as, conventional performance metrics that illustrate a holistic understanding of cache behavior. To facilitate this research, we build a memory simulator incorporated into the Structural Simulation Toolkit (Rodrigues et al. in SIGMETRICS Perform Eval Rev 38(4):37–42, 2011). Finally, our results suggest that variable cache line size can result in better performance and can also conserve power.« less
The healthcare experiences of Arab Israeli women in a reformed healthcare system.
Elnekave, Eldad; Gross, Revital
2004-07-01
Arab Israeli women are subject to unique social stresses deriving from their status as part of an ethno-political minority and from their position as women in a patriarchal community. Collectively, their health profiles rate poorly in comparison to Jewish Israeli women or to women in the vast majority of developed countries. To examine the experiences of Arab Israeli women in the contemporary Israeli healthcare system, following implementation of the National Health Insurance Law (NHIL). The study combined quantitative and qualitative research methodologies. A telephone survey utilizing a structured questionnaire was conducted during August-September 1998 among a random national sample of 849 women, with a response rate of 83%. Between the months of January and July of 2000, qualitative data was attained via participant-observation, long and short semi-structured interviews, and focus groups in one large Muslim Arab Israeli village. Arab Israeli women in the national survey reported poorer self-assessed health, lower rates of care by a woman primary care physician, lower satisfaction ratings for primary care physicians and more frequently foregoing medical care than did native or immigrant Jewish Israeli women. Three major factors contributing to Arab Israeli women's healthcare experiences were elucidated by the qualitative study: (1) the threat of physical and social exposure (2) difficulties in communicating with male physicians and (3) the stifling effect of family politics and surveillance on healthcare. We discuss our findings in relation to structural changes associated with the recent reform of the Israeli health care system. We conclude by suggesting policy measures for better adapting primary care services to the needs of Arab Israeli women, and note the relevance to other systems that aim to provide service to cultural and ethno-political minorities, in which healthcare delivery is shaped by unique local circumstances.
Fluorescent Biphenyl Derivatives of Phenylalanine Suitable for Protein Modification
Chen, Shengxi; Fahmi, Nour Eddine; Bhattacharya, Chandrabali; Wang, Lin; Jin, Yuguang; Benkovic, Stephen J.; Hecht, Sidney M.
2013-01-01
In a recent study, we demonstrated that structurally compact fluorophores incorporated into the side chains of amino acids could be introduced into dihydrofolate reductase from E. coli (ecDHFR) with minimal disruption of protein structure or function, even where the site of incorporation was within a folded region of the protein. The modified proteins could be employed for FRET measurements, providing sensitive monitors of changes in protein conformation. The very favorable results achieved in that study encouraged us to prepare additional fluorescent amino acids of potential utility for studying protein dynamics. Presently, we describe the synthesis and photophysical characterization of four positional isomers of biphenyl-phenylalanine, all of which were found to exhibit potentially useful fluorescent properties. All four phenylalanine derivatives were used to activate suppressor tRNA transcripts, and incorporated into multiple positions of ecDHFR. All phenylalanine derivatives were incorporated with good efficiency into position 16 of ecDHFR, and afforded modified proteins which consumed NADPH at rates up to about twice the rate measured for wild type. This phenomenon has been noted on a number of occasions previously and shown to be due to an increase in the off-rate of tetrahydrofolate from the enzyme, altering a step that is normally rate limiting. When introduced into sterically accessible position 49, the four phenylalanine derivatives afforded DHFRs having catalytic function comparable to wild type. The four phenylalanine derivatives were also introduced into position 115 of ecDHFR, which is known to be a folded region of the protein less tolerant of structural alteration. As anticipated, significant differences were noted in the catalytic efficiencies of the derived proteins. The ability of two of the sizeable biphenyl-phenylalanine derivatives to be accommodated at position 115 with minimal perturbation of DHFR function is attributed to rotational flexibility about the biphenyl bonds. PMID:24152169
Seal, Prasenjit; Oyedepo, Gbenga; Truhlar, Donald G
2013-01-17
In the present work, we study the H atom abstraction reactions by hydroxyl radical at all five sites of 1-butanol. Multistructural variational transition state theory (MS-VTST) was employed to estimate the five thermal rate constants. MS-VTST utilizes a multifaceted dividing surface that accounts for the multiple conformational structures of the transition state, and we also include all the structures of the reactant molecule. The vibrational frequencies and minimum energy paths (MEPs) were computed using the M08-HX/MG3S electronic structure method. The required potential energy surfaces were obtained implicitly by direct dynamics employing interpolated variational transition state theory with mapping (IVTST-M) using a variational reaction path algorithm. The M08-HX/MG3S electronic model chemistry was then used to calculate multistructural torsional anharmonicity factors to complete the MS-VTST rate constant calculations. The results indicate that torsional anharmonicity is very important at higher temperatures, and neglecting it would lead to errors of 26 and 32 at 1000 and 1500 K, respectively. Our results for the sums of the site-specific rate constants agree very well with the experimental values of Hanson and co-workers at 896-1269 K and with the experimental results of Campbell et al. at 292 K, but slightly less well with the experiments of Wallington et al., Nelson et al., and Yujing and Mellouki at 253-372 K; nevertheless, the calculated rates are within a factor of 1.61 of all experimental values at all temperatures. This gives us confidence in the site-specific values, which are currently inaccessible to experiment.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Syring, R.P.; Grubb, R.L.
1979-09-30
This document reports on the following: (1) experimental determination of the response of 16 basic structural elements and 7 B-52 components to simulated nuclear overpressure environments (utilizing Sandia Corporation's Thunderpipe Shock Tube), (2) analysis of these test specimens utilizing the NOVA-2 computer program, and (3) correlation of test and analysis results.
Magnetically-refreshable receptor platform structures for reusable nano-biosensor chips
NASA Astrophysics Data System (ADS)
Yoo, Haneul; Lee, Dong Jun; Cho, Dong-guk; Park, Juhun; Nam, Ki Wan; Tak Cho, Young; Park, Jae Yeol; Chen, Xing; Hong, Seunghun
2016-01-01
We developed a magnetically-refreshable receptor platform structure which can be integrated with quite versatile nano-biosensor structures to build reusable nano-biosensor chips. This structure allows one to easily remove used receptor molecules from a biosensor surface and reuse the biosensor for repeated sensing operations. Using this structure, we demonstrated reusable immunofluorescence biosensors. Significantly, since our method allows one to place receptor molecules very close to a nano-biosensor surface, it can be utilized to build reusable carbon nanotube transistor-based biosensors which require receptor molecules within a Debye length from the sensor surface. Furthermore, we also show that a single sensor chip can be utilized to detect two different target molecules simply by replacing receptor molecules using our method. Since this method does not rely on any chemical reaction to refresh sensor chips, it can be utilized for versatile biosensor structures and virtually-general receptor molecular species.
Rulon B. Gardner
1980-01-01
Larch-fir stands in northwest Montana were experimentally logged to determine the influence of increasingly intensive levels of utilization upon rates of yarding production, under three different silvicultural prescriptions. Variables influencing rate of production were also identified.
Code of Federal Regulations, 2014 CFR
2014-01-01
... the sponsor(s) and NRCS or other recipient(s) in which responsibilities and actions are established... conservation, development, utilization, and disposal of water; the conservation and proper utilization of land... U.S. Virgin Islands. Structural measures. Structural measures are those measures that are excavated...
Code of Federal Regulations, 2013 CFR
2013-01-01
... the sponsor(s) and NRCS or other recipient(s) in which responsibilities and actions are established... conservation, development, utilization, and disposal of water; the conservation and proper utilization of land... U.S. Virgin Islands. Structural measures. Structural measures are those measures that are excavated...
Code of Federal Regulations, 2011 CFR
2011-01-01
... the sponsor(s) and NRCS or other recipient(s) in which responsibilities and actions are established... conservation, development, utilization, and disposal of water; the conservation and proper utilization of land... U.S. Virgin Islands. Structural measures. Structural measures are those measures that are excavated...
Code of Federal Regulations, 2012 CFR
2012-01-01
... the sponsor(s) and NRCS or other recipient(s) in which responsibilities and actions are established... conservation, development, utilization, and disposal of water; the conservation and proper utilization of land... U.S. Virgin Islands. Structural measures. Structural measures are those measures that are excavated...
Miller, Gabriel A.; Clissold, Fiona J.; Mayntz, David; Simpson, Stephen J.
2009-01-01
Ectotherms have evolved preferences for particular body temperatures, but the nutritional and life-history consequences of such temperature preferences are not well understood. We measured thermal preferences in Locusta migratoria (migratory locusts) and used a multi-factorial experimental design to investigate relationships between growth/development and macronutrient utilization (conversion of ingesta to body mass) as a function of temperature. A range of macronutrient intake values for insects at 26, 32 and 38°C was achieved by offering individuals high-protein diets, high-carbohydrate diets or a choice between both. Locusts placed in a thermal gradient selected temperatures near 38°C, maximizing rates of weight gain; however, this enhanced growth rate came at the cost of poor protein and carbohydrate utilization. Protein and carbohydrate were equally digested across temperature treatments, but once digested both macronutrients were converted to growth most efficiently at the intermediate temperature (32°C). Body temperature preference thus yielded maximal growth rates at the expense of efficient nutrient utilization. PMID:19625322
24 CFR 990.185 - Utilities expense level: Incentives for energy conservation/rate reduction.
Code of Federal Regulations, 2011 CFR
2011-04-01
...) Utility benchmarking. HUD will pursue benchmarking utility consumption at the project level as part of the... convene a meeting with representation of appropriate stakeholders to review utility benchmarking options so that HUD may determine whether or how to implement utility benchmarking to be effective in FY 2011...
24 CFR 990.185 - Utilities expense level: Incentives for energy conservation/rate reduction.
Code of Federal Regulations, 2010 CFR
2010-04-01
...) Utility benchmarking. HUD will pursue benchmarking utility consumption at the project level as part of the... convene a meeting with representation of appropriate stakeholders to review utility benchmarking options so that HUD may determine whether or how to implement utility benchmarking to be effective in FY 2011...
Method and apparatus for obtaining enhanced production rate of thermal chemical reactions
Tonkovich, Anna Lee Y.; Wang, Yong; Wegeng, Robert S.; Gao, Yufei
2003-09-09
Reactors and processes are disclosed that can utilize high heat fluxes to obtain fast, steady-state reaction rates. Porous catalysts used in conjunction with microchannel reactors to obtain high rates of heat transfer are also disclosed. Reactors and processes that utilize short contact times, high heat flux and low pressure drop are described. Improved methods of steam reforming are also provided.
Method and apparatus for obtaining enhanced production rate of thermal chemical reactions
Tonkovich, Anna Lee Y [Pasco, WA; Wang, Yong [Richland, WA; Wegeng, Robert S [Richland, WA; Gao, Yufei [Kennewick, WA
2006-05-16
Reactors and processes are disclosed that can utilize high heat fluxes to obtain fast, steady-state reaction rates. Porous catalysts used in conjunction with microchannel reactors to obtain high rates of heat transfer are also disclosed. Reactors and processes that utilize short contact times, high heat flux and low pressure drop are described. Improved methods of steam reforming are also provided.
Agboola, Stephen; Golas, Sara; Fischer, Nils; Nikolova-Simons, Mariana; Op den Buijs, Jorn; Schertzer, Linda; Kvedar, Joseph; Jethwani, Kamal
2017-04-18
Personal Emergency Response Systems (PERS) are traditionally used as fall alert systems for older adults, a population that contributes an overwhelming proportion of healthcare costs in the United States. Previous studies focused mainly on qualitative evaluations of PERS without a longitudinal quantitative evaluation of healthcare utilization in users. To address this gap and better understand the needs of older patients on PERS, we analyzed longitudinal healthcare utilization trends in patients using PERS through the home care management service of a large healthcare organization. Retrospective, longitudinal analyses of healthcare and PERS utilization records of older patients over a 5-years period from 2011-2015. The primary outcome was to characterize the healthcare utilization of PERS patients. This outcome was assessed by 30-, 90-, and 180-day readmission rates, frequency of principal admitting diagnoses, and prevalence of conditions leading to potentially avoidable admissions based on Centers for Medicare and Medicaid Services classification criteria. The overall 30-day readmission rate was 14.2%, 90-days readmission rate was 34.4%, and 180-days readmission rate was 42.2%. While 30-day readmission rates did not increase significantly (p = 0.16) over the study period, 90-days (p = 0.03) and 180-days (p = 0.04) readmission rates did increase significantly. The top 5 most frequent principal diagnoses for inpatient admissions included congestive heart failure (5.7%), chronic obstructive pulmonary disease (4.6%), dysrhythmias (4.3%), septicemia (4.1%), and pneumonia (4.1%). Additionally, 21% of all admissions were due to conditions leading to potentially avoidable admissions in either institutional or non-institutional settings (16% in institutional settings only). Chronic medical conditions account for the majority of healthcare utilization in older patients using PERS. Results suggest that PERS data combined with electronic medical records data can provide useful insights that can be used to improve health outcomes in older patients.
Bojanić, Ljubica; Marković-Peković, Vanda; Škrbić, Ranko; Stojaković, Nataša; Ðermanović, Mirjana; Bojanić, Janja; Fürst, Jurij; Kurdi, Amanj B; Godman, Brian
2018-01-01
Introduction: There are increasing concerns world-wide with growing rates of antibiotic resistance necessitating urgent action. There have been a number of initiatives in the Republic of Srpska in recent years to address this and improve rational antibiotic prescribing and dispensing despite limited resources to fund multiple initiatives. Objective: Analyse antibiotic utilization patterns in the Republic of Srpska following these multiple initiatives as a basis for developing future programmes in the Republic if needed. Methods: Observational retrospective study of total outpatient antibiotic utilization from 2010 to 2015, based on data obtained from the Public Health Institute, alongside documentation of ongoing initiatives to influence utilization. The quality of antibiotic utilization principally assessed according to ESAC, ECDC, and WHO quality indicators and DU 90% (the drug utilization 90%) profile as well as vs. neighboring countries. Results: Following multiple initiatives, antibiotic utilization remained relatively stable in the Republic at 15.6 to 18.4 DIDs, with a decreasing trend in recent years, with rates comparable or lower than neighboring countries. Amoxicillin and the penicillins accounted for 29-40 and 50% of total utilization, respectively. Overall, limited utilization of co-amoxiclav (7-11%), cephalosporins, macrolides, and quinolones, as well as low use of third and fourth generation cephalosporins vs. first and second cephalosporins. However, increasing utilization of co-amoxiclav and azithromycin, as well as higher rates of quinolone utilization compared to some countries, was seen. Conclusions: Multiple interventions in the Republic of Srpska in recent years have resulted in one of the lowest utilization of antibiotics when compared with similar countries, acting as an exemplar to others. However, there are some concerns with current utilization of co-amoxiclav and azithromycin which are being addressed. This will be the subject of future research activities.
Fanaroff, Alexander C; Peterson, Eric D; Chen, Anita Y; Thomas, Laine; Doll, Jacob D; Fordyce, Christopher B; Newby, L Kristin; Amsterdam, Ezra A; Kosiborod, Mikhail N; de Lemos, James A; Wang, Tracy Y
2018-01-01
Importance Intensive care unit (ICU) utilization may have important implications for the care and outcomes of patients with non-ST-segment elevation myocardial infarction (NSTEMI). Objectives To examine inter-hospital variation in ICU utilization in the United States for older adults with hemodynamically stable NSTEMI and outcomes associated with ICU utilization among patients with at low, moderate, or high mortality risk. Design, Settings and Participants Retrospective analysis of 28,018 Medicare patients ≥65 years old admitted with NSTEMI to 346 hospitals participating in ACTION Registry-GWTG between April 1, 2011 and December 31, 2012. Patients with cardiogenic shock or cardiac arrest on presentation were excluded. Exposure Hospitals with high (>70% NSTEMI patients treated in an ICU during the index hospitalization), intermediate (30–70%), or low (< 30%) ICU utilization rates Main Outcome and Measure 30-day mortality Results Of NSTEMI patients ≥ 65 years old, 11,934 (43%) had an ICU stay. The proportion of NSTEMI patients treated in the ICU varied across hospitals (median 38% [26%, 54%]), but there were no significant differences in hospital characteristics or NSTEMI patient characteristics between hospitals with high, intermediate, or low ICU utilization rates. Compared with high ICU utilization hospitals, hospitals with low or intermediate ICU utilizations rates were only marginally more selective of higher risk patients, as determined by ACTION in-hospital mortality risk score or initial troponin level. Thirty-day mortality rates did not significantly differ based on hospital ICU utilization (high vs. low: 8.7% vs. 8.7%, adjusted OR 0.91, 95% CI 0.76–1.08; intermediate vs. low: 9.6% vs. 8.7%, adjusted OR 1.06, 95% CI 0.94–1.20). The relationship between hospital ICU utilization and mortality was similar in analyses stratified by low, moderate, or high ACTION risk score categories (adjusted interaction p 0.86). Conclusions and Relevance ICU utilization for older NSTEMI patients varied significantly among hospitals. This variability was not explained by hospital characteristics nor driven by patient risk. Post-MI mortality did not significantly differ among hospitals with high, intermediate, or low ICU utilization. PMID:27806171
ERIC Educational Resources Information Center
Chiang, Yu-Tzu; Yeh, Yu-Chen; Lin, Sunny S. J.; Hwang, Fang-Ming
2011-01-01
This study examined structure and predictive utility of the 2 x 2 achievement goal model among Taiwan pre-university school students (ages 10 to 16) who learned Chinese language arts. The confirmatory factor analyses of Achievement Goal Questionnaire-Chinese version provided good fitting between the factorial and dimensional structures with the…
Appari, Ajit; Johnson, M Eric; Anthony, Denise L
2018-01-01
To determine whether the use of information technology (IT), measured by Meaningful Use capability, is associated with lower rates of inappropriate utilization of imaging services in hospital outpatient settings. A retrospective cross-sectional analysis of 3332 nonfederal U.S. hospitals using data from: Hospital Compare (2011 outpatient imaging efficiency measures), HIMSS Analytics (2009 health IT), and Health Indicator Warehouse (market characteristics). Hospitals were categorized for their health IT infrastructure including EHR Stage-1 capability, and three advanced imaging functionalities/systems including integrated picture archiving and communication system, Web-based image distribution, and clinical decision support (CDS) with physician pathways. Three imaging efficiency measures suggesting inappropriate utilization during 2011 included: percentage of "combined" (with and without contrast) computed tomography (CT) studies out of all CT studies for abdomen and chest respectively, and percentage of magnetic resonance imaging (MRI) studies of lumbar spine without antecedent conservative therapy within 60days. For each measure, three separate regression models (GLM with gamma-log link function, and denominator of imaging measure as exposure) were estimated adjusting for hospital characteristics, market characteristics, and state fixed effects. Additionally, Heckman's Inverse Mills Ratio and propensity for Stage-1 EHR capability were used to account for selection bias. We find support for association of each of the four health IT capabilities with inappropriate utilization rates of one or more imaging modality. Stage-1 EHR capability is associated with lower inappropriate utilization rates for chest CT (incidence rate ratio IRR=0.72, p-value <0.01) and lumbar MRI (IRR=0.87, p-value <0.05). Integrated PACS is associated with lower inappropriate utilization rate of abdomen CT (IRR=0.84, p-value <0.05). Imaging distribution over Web capability is associated with lower inappropriate utilization rates for chest CT (IRR=0.66, p-value <0.05) and lumbar MRI (IRR=0.86, p-value <0.05). CDS with physician pathways is associated with lower inappropriate utilization rates for abdomen CT (IRR=0.87, p-value <0.01) and lumbar MRI (IRR=0.90, p-value <0.05). All other cases showed no association. The study offers mixed results. Taken together, the results suggest that the use of Stage-1 Meaningful Use capable EHR systems along with advanced imaging related functionalities could have a beneficial impact on reducing some of the inappropriate utilization of outpatient imaging. Copyright © 2017 Elsevier B.V. All rights reserved.
Sumowski, Chris Vanessa; Hanni, Matti; Schweizer, Sabine; Ochsenfeld, Christian
2014-01-14
The structural sensitivity of NMR chemical shifts as computed by quantum chemical methods is compared to a variety of empirical approaches for the example of a prototypical peptide, the 38-residue kaliotoxin KTX comprising 573 atoms. Despite the simplicity of empirical chemical shift prediction programs, the agreement with experimental results is rather good, underlining their usefulness. However, we show in our present work that they are highly insensitive to structural changes, which renders their use for validating predicted structures questionable. In contrast, quantum chemical methods show the expected high sensitivity to structural and electronic changes. This appears to be independent of the quantum chemical approach or the inclusion of solvent effects. For the latter, explicit solvent simulations with increasing number of snapshots were performed for two conformers of an eight amino acid sequence. In conclusion, the empirical approaches neither provide the expected magnitude nor the patterns of NMR chemical shifts determined by the clearly more costly ab initio methods upon structural changes. This restricts the use of empirical prediction programs in studies where peptide and protein structures are utilized for the NMR chemical shift evaluation such as in NMR refinement processes, structural model verifications, or calculations of NMR nuclear spin relaxation rates.
PURPA 210 avoided cost rates: Economic and implementation issues
DOE Office of Scientific and Technical Information (OSTI.GOV)
Devine, M.D.; Chartock, M.A.; Gunn, E.M.
The purpose of Section 210 of the Public Utilities Regulatory Policies Act (PURPA) was to promote the utilization of waste and renewable fuels and cogeneration processes for increasing electric power supplies. It represents a radical change in policy by allowing financially unregulated parties to generate power in ''qualifying facilities'' and by requiring utilities to purchase this power at the utilities' marginal (or ''avoided'') cost. PURPA 210 has clearly had a major impact as measured by the actual and proposed number of new qualifying facilities; however, implementation has been difficult due to the adversarial nature of the process for negotiating ormore » setting the avoided cost rates. This paper reviews the pertinent PURPA rules and regulations, analyzes the status of current avoided cost rates that have been established, and discusses implementation issues and options for resolving those issues.« less
Evaluation of a Stirling Solar Dynamic System for Lunar Oxygen Production
NASA Technical Reports Server (NTRS)
Colozza, Anthony J.; Wong, Wayne A.
2006-01-01
An evaluation of a solar concentrator-based system for producing oxygen from the lunar regolith was performed. The system utilizes a solar concentrator mirror to provide thermal energy for the oxygen production process as well as thermal energy to power a Stirling heat engine for the production of electricity. The electricity produced is utilized to operate the equipment needed in the oxygen production process. The oxygen production method utilized in the analysis was the hydrogen reduction of ilmenite. Utilizing this method of oxygen production a baseline system design was produced. This baseline system had an oxygen production rate of 0.6 kg/hr with a concentrator mirror size of 5 m. Variations were performed on the baseline design to show how changes in the system size and process rate effected the oxygen production rate.
Wang, Zuowei; Xia, Siqing; Xu, Xiaoyin; Wang, Chenhui
2016-02-01
In this study, a one-dimensional multispecies model (ODMSM) was utilized to simulate NO3(-)-N and ClO4(-) reduction performances in two kinds of H2-based membrane-aeration biofilm reactors (H2-MBfR) within different operating conditions (e.g., NO3(-)-N/ClO4(-) loading rates, H2 partial pressure, etc.). Before the simulation process, we conducted the sensitivity analysis of some key parameters which would fluctuate in different environmental conditions, then we used the experimental data to calibrate the more sensitive parameters μ1 and μ2 (maximum specific growth rates of denitrification bacteria and perchlorate reduction bacteria) in two H2-MBfRs, and the diversity of the two key parameters' values in two types of reactors may be resulted from the different carbon source fed in the reactors. From the simulation results of six different operating conditions (four in H2-MBfR 1 and two in H2-MBfR 2), the applicability of the model was approved, and the variation of the removal tendency in different operating conditions could be well simulated. Besides, the rationality of operating parameters (H2 partial pressure, etc.) could be judged especially in condition of high nutrients' loading rates. To a certain degree, the model could provide theoretical guidance to determine the operating parameters on some specific conditions in practical application.
Hacker, Karen A; Penfold, Robert B; Arsenault, Lisa N; Zhang, Fang; Soumerai, Stephen B; Wissow, Lawrence S
2015-11-01
The study sought to determine the impact of a pediatric behavioral health screening and colocation model on utilization of behavioral health care. In 2003, Cambridge Health Alliance, a Massachusetts public health system, introduced behavioral health screening and colocation of social workers sequentially within its pediatric practices. An interrupted time-series study was conducted to determine the impact on behavioral health care utilization in the 30 months after model implementation compared with the 18 months prior. Specifically, the change in trends of ambulatory, emergency, and inpatient behavioral health utilization was examined. Utilization data for 11,223 children ages ≥4 years 9 months to <18 years 3 months seen from 2003 to 2008 contributed to the study. In the 30 months after implementation of pediatric behavioral health screening and colocation, there was a 20.4% cumulative increase in specialty behavioral health visit rates (trend of .013% per month, p=.049) and a 67.7% cumulative increase in behavioral health primary care visit rates (trend of .019% per month, p<.001) compared with the expected rates predicted by the 18-month preintervention trend. In addition, behavioral health emergency department visit rates increased 245% compared with the expected rate (trend .01% per month, p=.002). After the implementation of a behavioral health screening and colocation model, more children received behavioral health treatment. Contrary to expectations, behavioral health emergency department visits also increased. Further study is needed to determine whether this is an effect of how care was organized for children newly engaged in behavioral health care or a reflection of secular trends in behavioral health utilization or both.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cappers, Peter; Hans, Liesel; Scheer, Richard
Time-based rate programs1, enabled by utility investments in advanced metering infrastructure (AMI), are increasingly being considered by utilities as tools to reduce peak demand and enable customers to better manage consumption and costs. There are several customer systems that are relatively new to the marketplace and have the potential for improving the effectiveness of these programs, including in-home displays (IHDs), programmable communicating thermostats (PCTs), and web portals. Policy and decision makers are interested in more information about customer acceptance, retention, and response before moving forward with expanded deployments of AMI-enabled new rates and technologies. Under the Smart Grid Investment Grantmore » Program (SGIG), the U.S. Department of Energy (DOE) partnered with several utilities to conduct consumer behavior studies (CBS). The goals involved applying randomized and controlled experimental designs for estimating customer responses more precisely and credibly to advance understanding of time-based rates and customer systems, and provide new information for improving program designs, implementation strategies, and evaluations. The intent was to produce more robust and credible analysis of impacts, costs, benefits, and lessons learned and assist utility and regulatory decision makers in evaluating investment opportunities involving time-based rates. To help achieve these goals, DOE developed technical guidelines to help the CBS utilities estimate customer acceptance, retention, and response more precisely.« less
Identifying antecedent conditions responsible for the high rate of mining injuries in Zambia.
Miller, Hugh B; Sinkala, Thomson; Renger, Ralph F; Peacock, Erin M; Tabor, Joseph A; Burgess, Jefferey L
2006-01-01
The incident rates of mining-related accidents and injuries in developing countries exceed those of developed nations. Interventions by international organizations routinely fail to produce appreciable long-term improvement. One major reason is the inability to identify and analyze the underlying factors responsible for creating unsafe working conditions. Understanding these antecedent conditions is necessary to formulate effective intervention strategies and prioritize the use of limited resources. This study utilized a logic model approach to determine the root causes and broad categories of potential interventions for mining accidents and injuries in Zambia. Results showed that policy interventions have the greatest potential for substantive change. A process of educating officials from government and mining companies about the economic and social merits of health and safety programs and extensive changes in regulatory structure and enforcement are needed.
Control Design Strategies to Enhance Long-Term Aircraft Structural Integrity
NASA Technical Reports Server (NTRS)
Newman, Brett A.
1999-01-01
Over the operational lifetime of both military and civil aircraft, structural components are exposed to hundreds of thousands of low-stress repetitive load cycles and less frequent but higher-stress transient loads originating from maneuvering flight and atmospheric gusts. Micro-material imperfections in the structure, such as cracks and debonded laminates, expand and grow in this environment, reducing the structural integrity and shortening the life of the airframe. Extreme costs associated with refurbishment of critical load-bearing structural components in a large fleet, or altogether reinventoring the fleet with newer models, indicate alternative solutions for life extension of the airframe structure are highly desirable. Increased levels of operational safety and reliability are also important factors influencing the desirability of such solutions. One area having significant potential for impacting crack growth/fatigue damage reduction and structural life extension is flight control. To modify the airframe response dynamics arising from command inputs and gust disturbances, feedback loops are routinely applied to vehicles. A dexterous flight control system architecture senses key vehicle motions and generates critical forces/moments at multiple points distributed throughout the airframe to elicit the desired motion characteristics. In principle, these same control loops can be utilized to influence the level of exposure to harmful loads during flight on structural components. Project objectives are to investigate and/or assess the leverage control has on reducing fatigue damage and enhancing long-term structural integrity, without degrading attitude control and trajectory guidance performance levels. In particular, efforts have focused on the effects inner loop control parameters and architectures have on fatigue damage rate. To complete this research, an actively controlled flexible aircraft model and a new state space modeling procedure for crack growth have been utilized. Analysis of the analytical state space model for crack growth revealed the critical mathematical factors, and hence the physical mechanism they represent, that influenced high rates of airframe crack growth. The crack model was then exercised with simple load inputs to uncover and expose key crack growth behavior. To characterize crack growth behavior, both "short-term" laboratory specimen test type inputs and "long-term" operational flight type inputs were considered. Harmonic loading with a single overload revealed typical exponential crack growth behavior until the overload application, after which time the crack growth was retarded for a period of time depending on the overload strength. An optimum overload strength was identified which leads to maximum retardation of crack growth. Harmonic loading with a repeated overload of varying strength and frequency again revealed an optimum overload trait for maximizing growth retardation. The optimum overload strength ratio lies near the range of 2 to 3 with dependency on frequency. Experimental data was found to correlate well with the analytical predictions.
Taksler, Glen B; Pfoh, Elizabeth R; Stange, Kurt C; Rothberg, Michael B
2018-05-08
The number of preventive care guidelines is rapidly increasing. It is unknown whether the number of guideline-recommended preventive services is associated with utilization. The authors used Poisson regression of 390,778 person-years of electronic medical records data from 2008 to 2015, in 80,773 individuals aged 50-75 years. Analyses considered eligibility for 11 preventive services most closely associated with guidelines: tobacco cessation; control of obesity, hypertension, lipids, or blood glucose; influenza vaccination; and screening for breast, cervical, or colorectal cancers, abdominal aortic aneurysm, or osteoporosis. The outcome was the rate of preventive care utilization over the following year. Results were adjusted for demographics and stratified by the number of disease risk factors (smoking, obesity, hypertension, hyperlipidemia, diabetes). Data were collected in 2016 and analyzed in 2017. Preventive care utilization was lower when the number of guideline-recommended preventive services was higher. The adjusted rate of preventive care utilization decreased from 38.67 per 100 (95% CI=38.16, 39.18) in patients eligible for one guideline-recommended service to 31.59 per 100 (95% CI=31.29, 31.89) in patients eligible for two services and 25.43 per 100 (95% CI=24.68, 26.18) in patients eligible for six or more services (p-trend<0.001). Results were robust to disease risk factors and observed for all but two services (tobacco cessation, obesity reduction). However, for any given number of guideline-recommended services, patients with more disease risk factors had higher utilization rates. The rate of preventive care utilization was lower when the number of guideline-recommended services was higher. Prioritizing recommendations might improve utilization of high-value services. Copyright © 2018 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.
Green, Jonathan D; Annunziata, Anthony; Kleiman, Sarah E; Bovin, Michelle J; Harwell, Aaron M; Fox, Annie M L; Black, Shimrit K; Schnurr, Paula P; Holowka, Darren W; Rosen, Raymond C; Keane, Terence M; Marx, Brian P
2017-08-01
Posttraumatic stress disorder (PTSD) diagnostic criteria have been criticized for including symptoms that overlap with commonly comorbid disorders, which critics argue undermines the validity of the diagnosis and inflates psychiatric comorbidity rates. In response, the upcoming 11th edition of the International Classification of Diseases (ICD-11) will offer PTSD diagnostic criteria that are intended to promote diagnostic accuracy. However, diagnostic utility analyses have not yet assessed whether these criteria minimize diagnostic errors. The present study examined the diagnostic utility of each PTSD symptom in the fifth edition of the Diagnostic and Statistical Manual for Mental Disorders (DSM-5) for males and females. Participants were 1,347 individuals enrolled in a longitudinal national registry of returning veterans receiving care at a Department of Veterans Affairs (VA) facility. Doctoral level clinicians assessed all participants using the PTSD module of the Structured Clinical Interview for DSM. Of the 20 symptoms examined, the majority performed in the fair to poor range on test quality indices. Although a few items did perform in the good (or better) range, only half were ICD-11 symptoms. None of the 20 symptoms demonstrated good quality of efficiency. Results demonstrated few sex differences across indices. There were no differences in the proportion of comorbid psychiatric disorders or functional impairment between DSM-5 and ICD-11 criteria. ICD-11 PTSD criteria demonstrate neither greater diagnostic specificity nor reduced rates of comorbidity relative to DSM-5 criteria and, as such, do not perform as intended. Modifications to existing symptoms or new symptoms may improve differential diagnosis. © 2017 Wiley Periodicals, Inc.