7 CFR 3052.305 - Auditor selection.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., auditees shall make positive efforts to utilize small businesses, minority-owned firms, and women's... of Federal auditors. Federal auditors may perform all or part of the work required under this part if...

Safe drinking water in regional NSW, Australia.

PubMed

Byleveld, Paul M; Leask, Sandy D; Jarvis, Leslie A; Wall, Katrina J; Henderson, Wendy N; Tickell, Joshua E

2016-04-15

The New South Wales (NSW) Public Health Act 2010 requires water suppliers to implement a drinking water quality assurance program that addresses the 'Framework for management of drinking water quality' in the Australian drinking water guidelines. NSW Health has recognised the importance of a staged implementation of this requirement and the need to support regional water utilities. To date, NSW Health has assisted 74 regional utilities to develop and implement their management systems. The Public Health Act 2010 has increased awareness of drinking water risk management, and offers a systematic process to identify and control risks. This has benefited large utilities, smaller suppliers, and remote and Aboriginal communities. Work is continuing to ensure implementation of the process by private suppliers and water carters.

40 CFR 35.937-4 - Solicitation and evaluation of proposals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... relative importance attached to each criterion (a numerical weighted formula need not be utilized). (c) All... subpart. The grantee shall also evaluate the candidate's proposed method to accomplish the work required...

42 CFR 424.20 - Requirements for posthospital SNF care.

Code of Federal Regulations, 2012 CFR

2012-10-01

... process whereby a physician extender works with a doctor of medicine or osteopathy to deliver health care... indicates whether utilization review is used as an alternative to the second and subsequent recertifications...

42 CFR 424.20 - Requirements for posthospital SNF care.

Code of Federal Regulations, 2011 CFR

2011-10-01

... process whereby a physician extender works with a doctor of medicine or osteopathy to deliver health care... indicates whether utilization review is used as an alternative to the second and subsequent recertifications...

42 CFR 424.20 - Requirements for posthospital SNF care.

Code of Federal Regulations, 2014 CFR

2014-10-01

... process whereby a physician extender works with a doctor of medicine or osteopathy to deliver health care... indicates whether utilization review is used as an alternative to the second and subsequent recertifications...

42 CFR 424.20 - Requirements for posthospital SNF care.

Code of Federal Regulations, 2013 CFR

2013-10-01

... process whereby a physician extender works with a doctor of medicine or osteopathy to deliver health care... indicates whether utilization review is used as an alternative to the second and subsequent recertifications...

Working with International Students in the U.S. and Beyond: A Summary of Survey Research by NCDA International Student Services Committee

ERIC Educational Resources Information Center

Balin, Elif; Anderson, Nicole M.; Chudasama, Satomi Y.; Kanagasingam, Sutha K.; Zhang, Lily

2016-01-01

The career development process is one of the most important aspects of the international student experience. Providing comprehensive and culturally competent services requires institutional efforts that utilize best practices developmentally throughout the college experience and beyond. This article is based on the work of the International…

Functional Requirements for an Electronic Work Package System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna H.

This document provides a set of high level functional requirements for a generic electronic work package (eWP) system. The requirements have been identified by the U.S. nuclear industry as a part of the Nuclear Electronic Work Packages - Enterprise Requirements (NEWPER) initiative. The functional requirements are mainly applied to eWP system supporting Basic and Moderate types of smart documents, i.e., documents that have fields for recording input such as text, dates, numbers, and equipment status, and documents which incorporate additional functionalities such as form field data “type“ validation (e.g. date, text, number, and signature) of data entered and/or self-populate basicmore » document information (usually from existing host application meta data) on the form when the user first opens it. All the requirements are categorized by the roles; Planner, Supervisor, Craft, Work Package Approval Reviewer, Operations, Scheduling/Work Control, and Supporting Functions. The categories Statistics, Records, Information Technology are also included used to group the requirements. All requirements are presented in Section 2 through Section 11. Examples of more detailed requirements are provided for the majority of high level requirements. These examples are meant as an inspiration to be used as each utility goes through the process of identifying their specific requirements. The report’s table of contents provides a summary of the high level requirements.« less

Associations between hours worked, symptoms and health resource utilization among full-time male Japanese workers.

PubMed

Sato, Keiko; Yamazaki, Shin; Hayashino, Yasuaki; Takegami, Misa; Tokuda, Yasuharu; Takahashi, Osamu; Shimbo, Takuro; Hinohara, Shigeaki; Fukui, Tsuguya; Fukuhara, Shunichi

2011-01-01

To investigate the association between hours worked, symptoms experienced, and health resource utilization. Data were collected from a nationally representative sample of households in Japan. We studied full-time male workers aged 18-65 yr who worked 100 h or more per month. First, we examined the association between hours worked and symptoms experienced. Second, we examined the association between hours worked and the type of health resource utilized, such as physician visits, over-the-counter (OTC) medication use, dietary supplement use, and complementary and alternative medicine (CAM) provider visits. We used a multivariable negative binominal model in each analysis. Of the 762 male workers, 598 reported experiencing symptoms at least once a month. We categorized participants based on the number of hours worked per month (h/mo): 100-200 h/mo, 201-250 h/mo, and over 250 h/mo. Compared with those working 201-250 h/mo, those working 100-200 h/mo had more frequent physician visits (rate ratio:1.67, 95% CI: 1.17 to 2.38) and those working over 250 h/mo had significantly lower rates of CAM provider visits and tended to use dietary supplements for symptoms. Participants who worked 201-250 h/mo used OTC medication most frequently. No significant association was observed between the number of hours worked and number of symptoms experienced. The more hours worked by full-time male workers, the more likely they were to use health resources that had a lower time requirement. Greater attention should be paid to patterns of health resource utilization among workers and their consequent influence on long-term health status.

High data rate modem simulation for the space station multiple-access communications system

NASA Technical Reports Server (NTRS)

Horan, Stephen

1987-01-01

The communications system for the space station will require a space based multiple access component to provide communications between the space based program elements and the station. A study was undertaken to investigate two of the concerns of this multiple access system, namely, the issues related to the frequency spectrum utilization and the possibilities for higher order (than QPSK) modulation schemes for use in possible modulators and demodulators (modems). As a result of the investigation, many key questions about the frequency spectrum utilization were raised. At this point, frequency spectrum utilization is seen as an area requiring further work. Simulations were conducted using a computer aided communications system design package to provide a straw man modem structure to be used for both QPSK and 8-PSK channels.

Recent developments in radiation field control technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, C.J.

1995-03-01

The U.S. nuclear power industry has been remarkably successful in reducing worker radiation exposures over the past ten years. There has been over a fourfold reduction in the person-rem incurred for each MW.year of electric power generated: from 1.8 in 1980, to only 0.39 person-rems in 1991 and 1992. Preliminary data for 1993 are even lower: approximately 0.37 person-rem.MW.year. Despite this substantial improvement, challenges for the industry remain. Individual exposure limits have been tightened in ICRP 60 and there will be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts with be increased requirements for specialmore » maintenance work as plants age, suggesting that vigorous efforts will be required to meet the industry goals for 1995. Reducing out-of-core radiation fields offer the best chance of continuing the downward trend in exposures. To assist utilities select the most economic technology for their specific plants, EPRI has published a manual capturing worldwide operating experience with radiation-field control techniques (TR-100265). No one method will suffice, but implementing suitable combinations from this collection will enable utilities to achieve their exposure goals. Radiation reduction is generally cost-effective: outages are shorter, manpower requirements are reduced and work quality is improved. Despite the up front costs, the benefits over the following 1-3 years typically outweigh the expenses.« less

SELECTED CHARACTERISTICS OF OCCUPATIONS (PHYSICAL DEMANDS, WORKING CONDITIONS, TRAINING TIME), A SUPPLEMENT TO THE DICTIONARY OF OCCUPATIONAL TITLES.

ERIC Educational Resources Information Center

Bureau of Employment Security (DOL), Washington, DC.

THIS SUPPLEMENT LISTS INDIVIDUAL PHYSICAL DEMANDS, WORKING CONDITIONS, AND TRAINING TIME DATA FOR EACH JOB DEFINED IN VOLUMES 1 AND 2 (VT 003 654 AND VT 003 655). IT WAS PUBLISHED IN RESPONSE TO THE SPECIAL NEEDS OF ORGANIZATIONS AND INDIVIDUALS CONCERNED WITH MANPOWER UTILIZATION WHO REQUIRE MORE SPECIFIC OCCUPATIONAL CHARACTERISTICS DATA THAN…

Do the Timeliness, Regularity, and Intensity of Online Work Habits Predict Academic Performance?

ERIC Educational Resources Information Center

Dvorak, Tomas; Jia, Miaoqing

2016-01-01

This study analyzes the relationship between students' online work habits and academic performance. We utilize data from logs recorded by a course management system (CMS) in two courses at a small liberal arts college in the U.S. Both courses required the completion of a large number of online assignments. We measure three aspects of students'…

7 CFR 1710.202 - Requirement to prepare a load forecast-power supply borrowers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 11 2011-01-01 2011-01-01 false Requirement to prepare a load forecast-power supply...—power supply borrowers. (a) A power supply borrower with a total utility plant of $500 million or more... be prepared pursuant to the approved load forecast work plan. (b) A power supply borrower that is a...

Prerequisites in behavioral science and business: opportunities for dental education.

PubMed

Dunning, David G; Lange, Brian M; Madden, Robert D; Tacha, Koko K

2011-01-01

There is increasing pressure on recent dental school graduates to understand and successfully utilize patient management and business management strategies to run a productive dental office. Dental schools are faced with the dilemma to either add more credit hours in their already crowded curriculum or adjust predental school requirements. All fifty-nine U.S. dental schools were assessed online to determine admission requirements in the areas of behavioral science and business education. Results show that only 11.9 percent of the schools require prerequisite course work in behavioral science and no school requires prerequisite course work in business. However, 64.4 percent and 30.5 percent of schools encouraged or recommended prerequisite course work in behavioral science and business, respectively. We suggest that the dental education community involve key stakeholders to discuss the incorporation of prerequisite course work in behavioral science and business. Additional courses in these disciplines would provide dental students better backgrounds from which the dental curriculum could build a more advanced and applied perspective to better prepare students for practice.

Principles and Guidelines for Duty and Rest Scheduling in Commercial Aviation

NASA Technical Reports Server (NTRS)

Dinges, David F.; Graeber, R. Curtis; Rosekind, Mark R.; Samel, Alexander

1996-01-01

The aviation industry requires 24-hour activities to meet operational demands. Growth in global long-haul, regional, overnight cargo, and short-haul domestic operations will continue to increase these round-the-clock requirements. Flight crews must be available to support 24-hour-a-day operations to meet these industry demands. Both domestic and international aviation can also require crossing multiple time zones. Therefore, shift work, night work, irregular work schedules, unpredictable work schedules, and dm zone changes will continue to be commonplace components of the aviation industry. These factors pose known challenges to human physiology, and because they result in performance-impairing fatigue, they pose a risk to safety. It is critical to acknowledge and, whenever possible, incorporate scientific information on fatigue, human sleep, and circadian physiology into 24-hour aviation operations. Utilization of such scientific information can help promote crew performance and alertness during flight operations and thereby maintain and improve the safety margin.

Strategies for rational utilization of bituminous coal deposits in the German Federal Republic

NASA Astrophysics Data System (ADS)

Erasmus, F. C.; Lenhartz, R.

1980-09-01

The status and economic conditions for coal mining in the GFR are examined, and the production of the individual coal regions is reviewed. Exploratory work, conducted in the light of inevitable production increases in the future, is noted. Some changes in the present coal production and utilization strategies which may be needed to meet future requirements and at the same time optimize the mining procedures are discussed.

Engineering yeast with bifunctional minicellulosome and cellodextrin pathway for co-utilization of cellulose-mixed sugars.

PubMed

Fan, Li-Hai; Zhang, Zi-Jian; Mei, Sen; Lu, Yang-Yang; Li, Mei; Wang, Zai-Yu; Yang, Jian-Guo; Yang, Shang-Tian; Tan, Tian-Wei

2016-01-01

Consolidated bioprocessing (CBP), integrating cellulase production, cellulose saccharification, and fermentation into one step has been widely considered as the ultimate low-cost configuration for producing second-generation fuel ethanol. However, the requirement of a microbial strain able to hydrolyze cellulosic biomass and convert the resulting sugars into high-titer ethanol limits CBP application. In this work, cellulolytic yeasts were developed by engineering Saccharomyces cerevisiae with a heterologous cellodextrin utilization pathway and bifunctional minicellulosomes. The cell-displayed minicellulosome was two-scaffoldin derived, and contained an endoglucanase and an exoglucanase, while the intracellular cellodextrin pathway consisted of a cellodextrin transporter and a β-glucosidase, which mimicked the unique cellulose-utilization system in Clostridium thermocellum and allowed S. cerevisiae to degrade and use cellulose without glucose inhibition/repression on cellulases and mixed-sugar uptake. Consequently, only a small inoculation of the non-induced yeast cells was required to efficiently co-convert both cellulose and galactose to ethanol in a single-step co-fermentation process, achieving a high specific productivity of ~62.61 mg cellulosic ethanol/g cell·h from carboxymethyl cellulose and ~56.37 mg cellulosic ethanol/g cell·h from phosphoric acid-swollen cellulose. Our work provides a versatile engineering strategy for co-conversion of cellulose-mixed sugars to ethanol by S. cerevisiae, and the achievements in this work may further promote cellulosic biofuel production.

Cost-benefit analysis: the first real rule of fight club?

PubMed Central

Hillman, Kristin L.

2013-01-01

Competition is ubiquitous among social animals. Vying against a conspecific to achieve a particular outcome often requires one to act aggressively, but this is a costly and inherently risky behavior. So why do we aggressively compete, or at the extreme, fight against others? Early work suggested that competitive aggression might stem from an innate aggressive tendency, emanating from subcortical structures. Later work highlighted key cortical regions that contribute toward an instrumental aggression network, one that is recruited or suppressed as needed to achieve a goal. Recent neuroimaging work hints that competitive aggression is upmost a cost-benefit decision, in that it appears to recruit many components of traditional, non-social decision-making networks. This review provides a historical glimpse into the neuroscience of competitive aggression, and proposes a conceptual advancement for studying competitive behavior by outlining how utility calculations of contested-for resources are skewed, pre- and post-competition. A basic multi-factorial model of utility assessment is proposed to account for competitive endowment effects that stem from the presence of peers, peer salience and disposition, and the tactical effort required for victory. In part, competitive aggression is a learned behavior that should only be repeated if positive outcomes are achieved. However, due to skewed utility assessments, deviations of associative learning occur. Hence truly careful cost-benefit analysis is warranted before choosing to vie against another. PMID:24391531

Cost-benefit analysis: the first real rule of fight club?

PubMed

Hillman, Kristin L

2013-12-19

Competition is ubiquitous among social animals. Vying against a conspecific to achieve a particular outcome often requires one to act aggressively, but this is a costly and inherently risky behavior. So why do we aggressively compete, or at the extreme, fight against others? Early work suggested that competitive aggression might stem from an innate aggressive tendency, emanating from subcortical structures. Later work highlighted key cortical regions that contribute toward an instrumental aggression network, one that is recruited or suppressed as needed to achieve a goal. Recent neuroimaging work hints that competitive aggression is upmost a cost-benefit decision, in that it appears to recruit many components of traditional, non-social decision-making networks. This review provides a historical glimpse into the neuroscience of competitive aggression, and proposes a conceptual advancement for studying competitive behavior by outlining how utility calculations of contested-for resources are skewed, pre- and post-competition. A basic multi-factorial model of utility assessment is proposed to account for competitive endowment effects that stem from the presence of peers, peer salience and disposition, and the tactical effort required for victory. In part, competitive aggression is a learned behavior that should only be repeated if positive outcomes are achieved. However, due to skewed utility assessments, deviations of associative learning occur. Hence truly careful cost-benefit analysis is warranted before choosing to vie against another.

Characterizing new compositions of [001]C relaxor ferroelectric single crystals using a work-energy model

NASA Astrophysics Data System (ADS)

Gallagher, John A.

2016-04-01

The desired operating range of ferroelectric materials with compositions near the morphotropic phase boundary is limited by field induced phase transformations. In [001]C cut and poled relaxor ferroelectric single crystals the mechanically driven ferroelectric rhombohedral to ferroelectric orthorhombic phase transformation is hindered by antagonistic electrical loading. Instability around the phase transformation makes the current experimental technique for characterization of the large field behavior very time consuming. Characterization requires specialized equipment and involves an extensive set of measurements under combined electrical, mechanical, and thermal loads. In this work a mechanism-based model is combined with a more limited set of experiments to obtain the same results. The model utilizes a work-energy criterion that calculates the mechanical work required to induce the transformation and the required electrical work that is removed to reverse the transformation. This is done by defining energy barriers to the transformation. The results of the combined experiment and modeling approach are compared to the fully experimental approach and error is discussed. The model shows excellent predictive capability and is used to substantially reduce the total number of experiments required for characterization. This decreases the time and resources required for characterization of new compositions.

Utility interface issues for grid-connected photovoltaic systems

NASA Astrophysics Data System (ADS)

Chu, D.; Key, T.; Fitzer, J.

Photovoltaic (PV) balance-of-system research and development has focused on interconnection with the utility grid as the most promising future application for photovoltaic energy production. These sysems must be compatible with the existing utility grid to be accepted. Compatibility encompasses many technical, economic and institutional issues, from lineman safety to revenue metering and power quality. This paper reviews DOE/PV sponsored research for two of the technical interconnection issues: harmonic injection, and power factor control. Explanations and rationale behind these two issues will be reviewed, and the status of current research and plans for required future work will be presented.

Value-Based Requirements Traceability: Lessons Learned

NASA Astrophysics Data System (ADS)

Egyed, Alexander; Grünbacher, Paul; Heindl, Matthias; Biffl, Stefan

Traceability from requirements to code is mandated by numerous software development standards. These standards, however, are not explicit about the appropriate level of quality of trace links. From a technical perspective, trace quality should meet the needs of the intended trace utilizations. Unfortunately, long-term trace utilizations are typically unknown at the time of trace acquisition which represents a dilemma for many companies. This chapter suggests ways to balance the cost and benefits of requirements traceability. We present data from three case studies demonstrating that trace acquisition requires broad coverage but can tolerate imprecision. With this trade-off our lessons learned suggest a traceability strategy that (1) provides trace links more quickly, (2) refines trace links according to user-defined value considerations, and (3) supports the later refinement of trace links in case the initial value consideration has changed over time. The scope of our work considers the entire life cycle of traceability instead of just the creation of trace links.

Mandibular third molar surgery in 396 patients at a Norwegian university clinic: Morbidity recorded after 1 week utilizing an e-infrastructure for clinical research.

PubMed

Øyri, Hauk; Bjørnland, Tore; Barkvoll, Pål; Jensen, Janicke Liaaen

2016-01-01

To evaluate morbidity 1 week after mandibular third molar (3M) surgery in the authors' department. A prospective 1-year clinical study of patients followed up for 1 week after 3M surgery was performed. Consecutive patients of 18 years or older having 3M surgery under local anaesthesia were included. Patients not able to attend a follow-up appointment after 1 week were excluded. Demographic data, indication for surgery and clinical findings were recorded. Outcome variables were days requiring analgesic, days absent from work/school and complications. All data recording was performed utilizing an e-infrastructure for clinical research (InReach, University Health Network, www.uhnsl.com). Three hundred and ninety-six patients were examined 1 week after surgery. Mean number of days requiring analgesics was 3.8 and mean number of days absent from work/school after surgery was 0.6. Minor complications were reported by 7% of patients. Female patients reported more days requiring analgesics compared to male patients. Smokers had a higher odds ratio for being absent ≥ 3 days. Prophylactic removal of 3Ms was associated with fewer days requiring analgesics and days absent from work/school as compared to teeth with local disease. Overall morbidity after 3M surgery was low. Compared to patients subjected to therapeutic removal of 3Ms, patients undergoing prophylactic removal seem to have less pain and a faster return to normal activities.

Developer handbook for Section 210 of PURPA for Vermont

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vanacore, J.

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Vermont the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for New Hampshire

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wersan, D.; O'Connell, J.

The essential element of the Public Utility Regulatory Policies Act of 1979 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in New Hampshire the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Massachusetts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vanacore, J.

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Massachusetts the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Oregon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vanacore, J.; Forbes, K.

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Oregon the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for New York

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in New York the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Georgia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Georgia the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for the Tennessee Valley Authority

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wersan, D.; Dabuliewicz, J.

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in the Tennessee Valley Region the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Virginia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Virginia the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Montana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, C.

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Montana the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for North Carolina

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitelaw, J.; Getz, T.B.

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in North Carolina the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Maine

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Connell, J.

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Maine the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Arkansas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Arkansas the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Colorado the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Pennsylvania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Pennsylvania the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Connecticut

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Connell, J.

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Connecticut the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obatining the information needed to stimulate further research and development.« less

Developer handbook for Section 210 of PURPA for Rhode Island

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, D.; Vanacore, J.

The essential element of the Public Utility Regulatory Policies Act of 1978 (PURPA) for developers is a reordering by Congress of the relationship between electric utilities and small power producers. The goal of PURPA is to encourage development of alternative sources of electricity by helping small power production become economically viable. The strategy adopted by Congress for encouraging development has two main components. First, the utility must purchase the power produced by a project meeting certain definitional requirements; and second, the utility must pay a price for the power, determined in accordance with guidelines set out in the FERC regulations.more » This handbook is designed to explain to developers in Rhode Island the requirements of PURPA, including: who may qualify for treatment as a facility that may invoke the mandates of PURPA; the impact of PURPA on the state; the role of the state utility commission and the impact of state laws on the developer. Thus, the primary goal of the handbook is to provide potential small producers with a working understanding of their status and rights vis a vis the state utility commissions and electric utilities, and to aid the potential developer in obtaining the information needed to stimulate further research and development.« less

Technology and Environmental Education: An Integrated Curriculum

ERIC Educational Resources Information Center

Willis, Jana M.; Weiser, Brenda

2005-01-01

Preparing teacher candidates to integrate technology into their future classrooms effectively requires experience in instructional planning that utilizes technology to enhance student learning. Teacher candidates need to work with curriculum that supports a variety of technologies. Using Project Learning Tree and environmental education (EE),…

Chemical reactivity testing for the National Spent Nuclear Fuel Program. Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koester, L.W.

This quality assurance project plan (QAPjP) summarizes requirements used by Lockheed Martin Energy Systems, Incorporated (LMES) Development Division at Y-12 for conducting chemical reactivity testing of Department of Energy (DOE) owned spent nuclear fuel, sponsored by the National Spent Nuclear Fuel Program (NSNFP). The requirements are based on the NSNFP Statement of work PRO-007 (Statement of Work for Laboratory Determination of Uranium Hydride Oxidation Reaction Kinetics.) This QAPjP will utilize the quality assurance program at Y-12, Y60-101PD, Quality Program Description, and existing implementing procedures for the most part in meeting the NSNFP Statement of Work PRO-007 requirements, exceptions will bemore » noted. The project consists of conducting three separate series of related experiments, ''Passivation of Uranium Hydride Powder With Oxygen and Water'', '''Passivation of Uranium Hydride Powder with Surface Characterization'', and ''Electrochemical Measure of Uranium Hydride Corrosion Rate''.« less

Numerical Modeling of Fluorescence Emission Energy Dispersion in Luminescent Solar Concentrator

NASA Astrophysics Data System (ADS)

Li, Lanfang; Sheng, Xing; Rogers, John; Nuzzo, Ralph

2013-03-01

We present a numerical modeling method and the corresponding experimental results, to address fluorescence emission dispersion for applications such as luminescent solar concentrator and light emitting diode color correction. Previously established modeling methods utilized a statistic-thermodynamic theory (Kenard-Stepnov etc.) that required a thorough understanding of the free energy landscape of the fluorophores. Some more recent work used an empirical approximation of the measured emission energy dispersion profile without considering anti-Stokes shifting during absorption and emission. In this work we present a technique for modeling fluorescence absorption and emission that utilizes the experimentally measured spectrum and approximates the observable Frank-Condon vibronic states as a continuum and takes into account thermodynamic energy relaxation by allowing thermal fluctuations. This new approximation method relaxes the requirement for knowledge of the fluorophore system and reduces demand on computing resources while still capturing the essence of physical process. We present simulation results of the energy distribution of emitted photons and compare them with experimental results with good agreement in terms of peak red-shift and intensity attenuation in a luminescent solar concentrator. This work is supported by the DOE `Light-Material Interactions in Energy Conversion' Energy Frontier Research Center under grant DE-SC0001293.

A Healthcare Utilization Analysis Framework for Hot Spotting and Contextual Anomaly Detection

PubMed Central

Hu, Jianying; Wang, Fei; Sun, Jimeng; Sorrentino, Robert; Ebadollahi, Shahram

2012-01-01

Patient medical records today contain vast amount of information regarding patient conditions along with treatment and procedure records. Systematic healthcare resource utilization analysis leveraging such observational data can provide critical insights to guide resource planning and improve the quality of care delivery while reducing cost. Of particular interest to providers are hot spotting: the ability to identify in a timely manner heavy users of the systems and their patterns of utilization so that targeted intervention programs can be instituted, and anomaly detection: the ability to identify anomalous utilization cases where the patients incurred levels of utilization that are unexpected given their clinical characteristics which may require corrective actions. Past work on medical utilization pattern analysis has focused on disease specific studies. We present a framework for utilization analysis that can be easily applied to any patient population. The framework includes two main components: utilization profiling and hot spotting, where we use a vector space model to represent patient utilization profiles, and apply clustering techniques to identify utilization groups within a given population and isolate high utilizers of different types; and contextual anomaly detection for utilization, where models that map patient’s clinical characteristics to the utilization level are built in order to quantify the deviation between the expected and actual utilization levels and identify anomalies. We demonstrate the effectiveness of the framework using claims data collected from a population of 7667 diabetes patients. Our analysis demonstrates the usefulness of the proposed approaches in identifying clinically meaningful instances for both hot spotting and anomaly detection. In future work we plan to incorporate additional sources of observational data including EMRs and disease registries, and develop analytics models to leverage temporal relationships among medical encounters to provide more in-depth insights. PMID:23304306

A healthcare utilization analysis framework for hot spotting and contextual anomaly detection.

PubMed

Hu, Jianying; Wang, Fei; Sun, Jimeng; Sorrentino, Robert; Ebadollahi, Shahram

2012-01-01

Patient medical records today contain vast amount of information regarding patient conditions along with treatment and procedure records. Systematic healthcare resource utilization analysis leveraging such observational data can provide critical insights to guide resource planning and improve the quality of care delivery while reducing cost. Of particular interest to providers are hot spotting: the ability to identify in a timely manner heavy users of the systems and their patterns of utilization so that targeted intervention programs can be instituted, and anomaly detection: the ability to identify anomalous utilization cases where the patients incurred levels of utilization that are unexpected given their clinical characteristics which may require corrective actions. Past work on medical utilization pattern analysis has focused on disease specific studies. We present a framework for utilization analysis that can be easily applied to any patient population. The framework includes two main components: utilization profiling and hot spotting, where we use a vector space model to represent patient utilization profiles, and apply clustering techniques to identify utilization groups within a given population and isolate high utilizers of different types; and contextual anomaly detection for utilization, where models that map patient's clinical characteristics to the utilization level are built in order to quantify the deviation between the expected and actual utilization levels and identify anomalies. We demonstrate the effectiveness of the framework using claims data collected from a population of 7667 diabetes patients. Our analysis demonstrates the usefulness of the proposed approaches in identifying clinically meaningful instances for both hot spotting and anomaly detection. In future work we plan to incorporate additional sources of observational data including EMRs and disease registries, and develop analytics models to leverage temporal relationships among medical encounters to provide more in-depth insights.

Roadmap for Testing and Validation of Electric Vehicle Communication Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pratt, Richard M.; Tuffner, Francis K.; Gowri, Krishnan

Vehicle to grid communication standards are critical to the charge management and interoperability among plug-in electric vehicles (PEVs), charging stations and utility providers. The Society of Automobile Engineers (SAE), International Organization for Standardization (ISO), International Electrotechnical Commission (IEC) and the ZigBee Alliance are developing requirements for communication messages and protocols. While interoperability standards development has been in progress for more than two years, no definitive guidelines are available for the automobile manufacturers, charging station manufacturers or utility backhaul network systems. At present, there is a wide range of proprietary communication options developed and supported in the industry. Recent work bymore » the Electric Power Research Institute (EPRI), in collaboration with SAE and automobile manufacturers, has identified performance requirements and developed a test plan based on possible communication pathways using power line communication (PLC). Though the communication pathways and power line communication technology options are identified, much work needs to be done in developing application software and testing of communication modules before these can be deployed in production vehicles. This paper presents a roadmap and results from testing power line communication modules developed to meet the requirements of SAE J2847/1 standard.« less

Requirements, model and prototype for a multi-utility locational and security information hub.

DOT National Transportation Integrated Search

2015-11-01

This project lays the foundation for building an exchange hub for locational and security data and risk assessment of potential excavation work. It acts primarily at 2 stages: upstream of the mark-out process, as a decision support tool to help strea...

10 CFR 50.9 - Completeness and accuracy of information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Completeness and accuracy of information. 50.9 Section 50.9 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND UTILIZATION FACILITIES... appropriate Regional Office within two working days of identifying the information. This requirement is not...

10 CFR 50.9 - Completeness and accuracy of information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Completeness and accuracy of information. 50.9 Section 50.9 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND UTILIZATION FACILITIES... appropriate Regional Office within two working days of identifying the information. This requirement is not...

10 CFR 50.9 - Completeness and accuracy of information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Completeness and accuracy of information. 50.9 Section 50.9 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND UTILIZATION FACILITIES... appropriate Regional Office within two working days of identifying the information. This requirement is not...

10 CFR 50.9 - Completeness and accuracy of information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Completeness and accuracy of information. 50.9 Section 50.9 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND UTILIZATION FACILITIES... appropriate Regional Office within two working days of identifying the information. This requirement is not...

10 CFR 50.9 - Completeness and accuracy of information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Completeness and accuracy of information. 50.9 Section 50.9 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND UTILIZATION FACILITIES... appropriate Regional Office within two working days of identifying the information. This requirement is not...

Housekeeping. An Approach to Housekeeping Training.

ERIC Educational Resources Information Center

Hotel and Catering Industry Training Board, Wembley (England).

This booklet examines the training required by staff employed in housekeeping departments in the hotel and catering industry. It details specifications of particular tasks--baths/cloakrooms; service pantries and utility rooms; beds; furniture/fittings; floors/walls and ceilings; carpets/upholstery/soft furnishings; linen handling; linen room work;…

New common program requirements for the resident physician workforce and the omission of strategic napping: A missed opportunity.

PubMed

Shnayder, Michelle M; St Onge, Joan E; Caban-Martinez, Alberto J

2017-09-01

Napping has known benefits for fatigue mitigation and improved alertness. However the Accreditation Council for Graduate Medical Education (ACGME) New Common Program Requirements recently removed the 16 h work limit for PGY1 residents and removed any suggestions of napping. We utilized a cross-sectional study design to administer a 44-item questionnaire in June 2016 to 858 residents and fellows at one large urban academic medical center. We assessed: 1) resident physician sentiment of work environment supportiveness for napping at work; and 2) agreement with 2011 ACGME guidelines on workweek hour limitations and strategic napping recommendations. While 89% of residents reported access to an on-call room at work, only 20% felt their work environment supported a culture of napping while at work. Over 76% expressed agreement with the 2011 ACGME work-hour restrictions. Strategies to support napping and well-being within the resident physician workforce and organizational setting are warranted. © 2017 Wiley Periodicals, Inc.

Learning Asset Technology Integration Support Tool Design Document

DTIC Science & Technology

2010-05-11

language known as Hypertext Preprocessor ( PHP ) and by MySQL – a relational database management system that can also be used for content management. It...Requirements The LATIST tool will be implemented utilizing a WordPress platform with MySQL as the database. Also the LATIST system must effectively work... MySQL . When designing the LATIST system there are several considerations which must be accounted for in the working prototype. These include: • DAU

Operational Simulation Tools and Long Term Strategic Planning for High Penetrations of PV in the Southeastern United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tuohy, Aidan; Smith, Jeff; Rylander, Matt

2016-07-11

Increasing levels of distributed and utility scale Solar Photovoltaics (PV) will have an impact on many utility functions, including distribution system operations, bulk system performance, business models and scheduling of generation. In this project, EPRI worked with Southern Company Services and its affiliates and the Tennessee Valley Authority to assist these utilities in their strategic planning efforts for integrating PV, based on modeling, simulation and analysis using a set of innovative tools. Advanced production simulation models were used to investigate operating reserve requirements. To leverage existing work and datasets, this last task was carried out on the California system. Overall,more » the project resulted in providing useful information to both of the utilities involved and through the final reports and interactions during the project. The results from this project can be used to inform the industry about new and improved methodologies for understanding solar PV penetration, and will influence ongoing and future research. This report summarizes each of the topics investigated over the 2.5-year project period.« less

Concurrent negotiation and coordination for grid resource coallocation.

PubMed

Sim, Kwang Mong; Shi, Benyun

2010-06-01

Bolstering resource coallocation is essential for realizing the Grid vision, because computationally intensive applications often require multiple computing resources from different administrative domains. Given that resource providers and consumers may have different requirements, successfully obtaining commitments through concurrent negotiations with multiple resource providers to simultaneously access several resources is a very challenging task for consumers. The impetus of this paper is that it is one of the earliest works that consider a concurrent negotiation mechanism for Grid resource coallocation. The concurrent negotiation mechanism is designed for 1) managing (de)commitment of contracts through one-to-many negotiations and 2) coordination of multiple concurrent one-to-many negotiations between a consumer and multiple resource providers. The novel contributions of this paper are devising 1) a utility-oriented coordination (UOC) strategy, 2) three classes of commitment management strategies (CMSs) for concurrent negotiation, and 3) the negotiation protocols of consumers and providers. Implementing these ideas in a testbed, three series of experiments were carried out in a variety of settings to compare the following: 1) the CMSs in this paper with the work of others in a single one-to-many negotiation environment for one resource where decommitment is allowed for both provider and consumer agents; 2) the performance of the three classes of CMSs in different resource market types; and 3) the UOC strategy with the work of others [e.g., the patient coordination strategy (PCS )] for coordinating multiple concurrent negotiations. Empirical results show the following: 1) the UOC strategy achieved higher utility, faster negotiation speed, and higher success rates than PCS for different resource market types; and 2) the CMS in this paper achieved higher final utility than the CMS in other works. Additionally, the properties of the three classes of CMSs in different kinds of resource markets are also verified.

32 CFR 552.102 - Requirements for possession and use.

Code of Federal Regulations, 2012 CFR

2012-07-01

... RESERVATIONS AND NATIONAL CEMETERIES REGULATIONS AFFECTING MILITARY RESERVATIONS Firearms and Weapons § 552.102... within three working days after arrival on the installation, or after obtaining the weapon, except: (1... registered firearms in unit arms rooms. The unit arms room should utilize a standard weapons card and log...

Coordinating Technological Resources in a Non-Technical Profession: The Administrative Computer User Group.

ERIC Educational Resources Information Center

Rollo, J. Michael; Marmarchev, Helen L.

1999-01-01

The explosion of computer applications in the modern workplace has required student affairs professionals to keep pace with technological advances for office productivity. This article recommends establishing an administrative computer user groups, utilizing coordinated web site development, and enhancing working relationships as ways of dealing…

77 FR 28853 - Proposed Information Collection; Comment Request; Generic Clearance for Usability Data Collections

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-16

... the Department of Commerce, proposes to conduct a number of data collection efforts--both quantitative and qualitative. The data collections will be designed to determine requirement and evaluate the usability and utility of NIST research for measurement and standardization work. These data collections...

Some Contracting Controls at Mission and Installation Contracting Command, Fort Polk, Louisiana, Need Improvement

DTIC Science & Technology

2015-02-12

erosion control. Work that did not meet PWS requirements included laying pavement stones for a monument walkway and installing a glossy marble -like... property structures, roads, training areas, training facilities, and utility infrastructure. The contract period of performance consisted of a base year

YOUR TALENTS--LET'S NOT WASTE THEM.

ERIC Educational Resources Information Center

KEYSERLING, MARY DUBLIN

AMERICAN WOMAN POWER NEEDS TO BE MORE FULLY UTILIZED TO MEET THE NATION'S MANPOWER REQUIREMENTS. PROFESSIONAL AND TECHNICAL OCCUPATIONS ARE THE FASTEST GROWING CAREER FIELDS, AND MEN ALONE CANNOT MEET THEIR MANPOWER DEMANDS. CLERICAL WORK AND SERVICE OCCUPATIONS ARE EXPECTED TO SHOW THE SECOND AND FASTEST RATE OF GROWTH. SALES OCCUPATIONS ARE ALSO…

Online Tools to Support the Delivery of Evidence-Based Practices for Students with ASD

ERIC Educational Resources Information Center

Sam, Ann M.; Kucharczyk, Suzanne; Waters, Victoria

2018-01-01

Educators continually encounter new challenges that require different tools or ways to utilize current tools in novel ways. Common challenges when working with students with autism spectrum disorder (ASD) may include addressing interfering behavior, developing communication systems, increasing social opportunities for students, and addressing…

Previously uncharacterized Salmonella enterica genes required for swarming play a role in seedling colonization

USDA-ARS?s Scientific Manuscript database

Incidences of bacterial foodborne illness caused by ingestion of fresh produce are rising. Instead of being a case of incidental contamination, the animal pathogen Salmonella enterica utilizes specific molecular mechanisms to attach to and colonize plants. This work characterizes two S. enterica gen...

Using Electric Vehicles to Meet Balancing Requirements Associated with Wind Power

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tuffner, Francis K.; Kintner-Meyer, Michael CW

2011-07-31

Many states are deploying renewable generation sources at a significant rate to meet renewable portfolio standards. As part of this drive to meet renewable generation levels, significant additions of wind generation are planned. Due to the highly variable nature of wind generation, significant energy imbalances on the power system can be created and need to be handled. This report examines the impact on the Northwest Power Pool (NWPP) region for a 2019 expected wind scenario. One method for mitigating these imbalances is to utilize plug-in hybrid electric vehicles (PHEVs) or battery electric vehicles (BEVs) as assets to the grid. PHEVsmore » and BEVs have the potential to meet this demand through both charging and discharging strategies. This report explores the usage of two different charging schemes: V2GHalf and V2GFull. In V2GHalf, PHEV/BEV charging is varied to absorb the additional imbalance from the wind generation, but never feeds power back into the grid. This scenario is highly desirable to automotive manufacturers, who harbor great concerns about battery warranty if vehicle-to-grid discharging is allowed. The second strategy, V2GFull, varies not only the charging of the vehicle battery, but also can vary the discharging of the battery back into the power grid. This scenario is currently less desirable to automotive manufacturers, but provides an additional resource benefit to PHEV/BEVs in meeting the additional imbalance imposed by wind. Key findings in the report relate to the PHEV/BEV population required to meet the additional imbalance when comparing V2GHalf to V2GFull populations, and when comparing home-only-charging and work-and-home-charging scenarios. Utilizing V2GFull strategies over V2GHalf resulted in a nearly 33% reduction in the number of vehicles required. This reduction indicates fewer vehicles are needed to meet the unhandled energy, but they would utilize discharging of the vehicle battery into the grid. This practice currently results in the voiding of automotive manufacturer's battery warranty, and is not feasible for many customers. The second key finding is the change in the required population when PHEV/BEV charging is available at both home and work. Allowing 10% of the vehicle population access to work charging resulted in nearly 80% of the grid benefit. Home-only charging requires, at best, 94% of the current NWPP light duty vehicle fleet to be a PHEV or BEV. With the introduction of full work charging availability, only 8% of the NWPP light duty vehicle fleet is required. Work charging has primarily been associated with mitigating range anxiety in new electric vehicle owners, but these studies indicate they have significant potential for improving grid reliability. The V2GHalf and V2GFull charging strategies of the report utilize grid frequency as an indication of the imbalance requirements. The introduction of public charging stations, as well as the potential for PHEV/BEVs to be used as a resource for renewable generation integration, creates conditions for additional products into the ancillary services market. In the United Kingdom, such a capability would be bid as a frequency product in the ancillary services market. Such a market could create the need for larger, third-party aggregators or services to manage the use of electric vehicles as a grid resource. Ultimately, customer adoption, usage patterns and habits, and feedback from the power and automotive industries will drive the need.« less

Asthma Outcomes: Healthcare Utilization and Costs

PubMed Central

Akinbami, Lara J.; Sullivan, Sean D.; Campbell, Jonathan D.; Grundmeier, Robert W.; Hartert, Tina V.; Lee, Todd A.; Smith, Robert A.

2014-01-01

Background Measures of healthcare utilization and indirect impact of asthma morbidity are used to assess clinical interventions and estimate cost. Objective National Institutes of Health (NIH) institutes and other federal agencies convened an expert group to propose standardized measurement, collection, analysis, and reporting of healthcare utilization and cost outcomes in future asthma studies. Methods We used comprehensive literature reviews and expert opinion to compile a list of asthma healthcare utilization outcomes that we classified as core (required in future studies), supplemental (used according to study aims and standardized) and emerging (requiring validation and standardization). We also have identified methodology to assign cost to these outcomes. This work was discussed at an NIH-organized workshop in March 2010 and finalized in September 2011. Results We identified 3 ways to promote comparability across clinical trials for measures of healthcare utilization, resource use, and cost: (1) specify the study perspective (patient, clinician, payer, society), (2) standardize the measurement period (ideally, 12 months), and (3) use standard units to measure healthcare utilization and other asthma-related events. Conclusions Large clinical trials and observational studies should collect and report detailed information on healthcare utilization, intervention resources, and indirect impact of asthma, so that costs can be calculated and cost-effectiveness analyses can be conducted across several studies. Additional research is needed to develop standard, validated survey instruments for collection of provider-reported and participant-reported data regarding asthma-related health care. PMID:22386509

Euro Data Bus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engel, H.E.; Hall, J.R. II; Schrock, C.B.

1995-12-31

With the disintegration of the Soviet Union and the opening of the Iron Curtain, a downsizing of the Defense Establishment in the West is occurring, causing industry to look for opportunities where technology used for military applications can be applied to meet former East Block countries. Among these requirements has been the urgent desire of the people in former East Block countries for access to Western media which had been denied them, and has led to numerous opportunities for the implementation of Cable Television (CATV) systems. In addition, there are also requirements for utility metering for electricity, gas, water, heat,more » etc. which had previously been provided to the population by the Government at little or no cost. EWT of Augsburg, Germany, previously a subcontractor to ASEC on military security system projects, who has a subsidiary, TSS, which is a prominent CATV systems house, requested ASEC to provide a system which can provide utility meter reading and other control and monitoring services utilizing CATV. Working with CableBus Systems Corporation, a CATV data communications supplier and various utility meter manufacturers, ASEC, as the System Integrator, has developed a utilities monitoring system. This system. in cooperation with EWT, is being marketed and sold in Europe as EURO DATA BUS. This paper describes EURO DATA BUS and its applications, as well as the actual system designs for two pilot applications. One system is oriented at Utility Meter Reading and Demand side Management primarily, but will also be used to demonstrate other system capabilities such as security and fire alarm monitoring, etc. The design is therefore quite straightforward and {open_quotes}standard{close_quotes}. The second system has more of an industrial orientation and involves the monitoring and load control for a Municipal Electric Utility. While well within the capabilities of the system to accomplish, a more customized design was required to meet these requirements.« less

Thermal management of instruments on space platforms using a high capacity two-phase heat transport system

NASA Technical Reports Server (NTRS)

Ollendorf, S.; Fowle, A.; Almgren, D.

1981-01-01

A system utilizing a pumped, two-phase single component working fluid for heat exchange and transport services necessary to meet the temperature control requirements of typical orbiting instrument payloads on space platforms is described. The design characteristics of the system is presented, together with a presentation of a laboratory apparatus for demonstration of proof of concept. Results indicate that the pumped two-phase design concept can meet a wide range of thermal performance requirements with the only penalty being the requirement for a small liquid pump.

Social Consequences of Nomadic Working: A Case Study in an Organization

NASA Astrophysics Data System (ADS)

Singh, Ramanjit; Wood-Harper, Trevor

This research study identified social challenges that knowledge workers in the Swedish organization TeliaSonera (Telia) face when utilizing wireless technologies to conduct work on the move. Upon collecting the relevant research data, five problem areas were identified: work and life balance, addiction, organizational involvement, nomadic work and control, and individual productivity. Each problem area was examined with the philosophical underpinning of socio-technical design principles. The results confirm that better role boundary management, self-discipline, work negotiation, and e-mail communication skills may be required for the knowledge workers to manage the demands of nomadic working. Similarly, rewarding nomadic work performance, building employee supervisor trust relations, and designing jobs that enhance work and life balance can be imperative.

Local Material as a Character of Contemporary Interior Design in Indonesia

NASA Astrophysics Data System (ADS)

Susanto, Dalhar; Puti Angelia, Dini; Ningsih, Tria Amalia

2017-12-01

Excellent design needs to fulfill universal requirements (utility, aesthetic, ergonomic, durability, and safe). Besides of all the requirements, an excellent design has to be shown its distinctiveness, uniqueness, and identity. To create an excellent design, we can use one of locality approach, it means local material utilization. From time to time, the material is linking each other in unity with environment context, human, knowledge, culture, social, economy, user needs and material availability. The aspects are the important part to get the reflective identity and local values in architecture and interior design work in Indonesia. It can be proofed by some of the architecture and interior work precedent, like traditional or vernacular in Nusantara or contemporary interior design work from Indonesian designer who has recognized to promote the locality value. However interior design works in Indonesia cannot be shown the characteristic of Indonesia identity and locality currently, it is different than another country work, like Japan, Italy, or Scandinavia. Interior design work from these countries can be easily known with accentuating of characteristic their places, such as material, color, detail, or geometry pattern in the product that has been produced. Meanwhile, some of the region in Indonesia are tropical climate and brought about much of local material and it has potential to make a unique work which has the local identity. This paper will discuss the result of a searching potential of local material usefulness as interior design identity in Indonesia. This research is done by typology method, which means discover the presence of some of the architecture elements appears to be related material. The elements are the pattern, color, craftsmanship, building element, object, and type of material in some of the contemporary interior design work in Indonesia were considered superior and capable of lifting elements recognized locality.

Using the living laboratory framework as a basis for understanding next-generation analyst work

NASA Astrophysics Data System (ADS)

McNeese, Michael D.; Mancuso, Vincent; McNeese, Nathan; Endsley, Tristan; Forster, Pete

2013-05-01

The preparation of next generation analyst work requires alternative levels of understanding and new methodological departures from the way current work transpires. Current work practices typically do not provide a comprehensive approach that emphasizes the role of and interplay between (a) cognition, (b) emergent activities in a shared situated context, and (c) collaborative teamwork. In turn, effective and efficient problem solving fails to take place, and practice is often composed of piecemeal, techno-centric tools that isolate analysts by providing rigid, limited levels of understanding of situation awareness. This coupled with the fact that many analyst activities are classified produces a challenging situation for researching such phenomena and designing and evaluating systems to support analyst cognition and teamwork. Through our work with cyber, image, and intelligence analysts we have realized that there is more required of researchers to study human-centered designs to provide for analyst's needs in a timely fashion. This paper identifies and describes how The Living Laboratory Framework can be utilized as a means to develop a comprehensive, human-centric, and problem-focused approach to next generation analyst work, design, and training. We explain how the framework is utilized for specific cases in various applied settings (e.g., crisis management analysis, image analysis, and cyber analysis) to demonstrate its value and power in addressing an area of utmost importance to our national security. Attributes of analyst work settings are delineated to suggest potential design affordances that could help improve cognitive activities and awareness. Finally, the paper puts forth a research agenda for the use of the framework for future work that will move the analyst profession in a viable manner to address the concerns identified.

Task 2 Report - A GIS-Based Technical Potential Assessment of Domestic Energy Resources for Electricity Generation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Nathan; Grue, Nicholas W; Rosenlieb, Evan

The purpose of this report is to support the Lao Ministry of Energy and Mines in assessing the technical potential of domestic energy resources for utility scale electricity generation in the Lao PDR. Specifically, this work provides assessments of technical potential, and associated maps of developable areas, for energy technologies of interest. This report details the methodology, assumptions, and datasets employed in this analysis to provide a transparent, replicable process for future analyses. The methodology and results presented are intended to be a fundamental input to subsequent decision making and energy planning-related analyses. This work concentrates on domestic energy resourcesmore » for utility-scale electricity generation and considers solar photovoltaic, wind, biomass, and coal resources. This work does not consider potentially imported energy resources (e.g., natural gas) or domestic energy resources that are not present in sufficient quantity for utility-scale generation (e.g., geothermal resources). A technical potential assessment of hydropower resources is currently not feasible due to the absence of required data including site-level assessments of multiple characteristics (e.g., geology environment and access) as well as spatial data on estimated non-exploited hydropower resources. This report is the second output of the Energy Alternatives Study for the Lao PDR, a collaboration led by the Lao Ministry of Energy and Mines and the United States Agency for International Development under the auspices of the Smart Infrastructure for the Mekong program. The Energy Alternatives Study is composed of five successive tasks that collectively support the project's goals. This work is focused on Task 2 - Assess technical potential of domestic energy resources for electricity generation. The work was carried out by a team from the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) in collaboration with the Lao Ministry of Energy and Mines and other Lao power sector stakeholders. and datasets employed in this analysis to provide a transparent, replicable process for future analyses. The methodology and results presented are intended to be a fundamental input to subsequent decision making and energy planning-related analyses. This work concentrates on domestic energy resources for utility-scale electricity generation and considers solar photovoltaic, wind, biomass, and coal resources. This work does not consider potentially imported energy resources (e.g., natural gas) or domestic energy resources that are not present in sufficient quantity for utility-scale generation (e.g., geothermal resources). A technical potential assessment of hydropower resources is currently not feasible due to the absence of required data including site-level assessments of multiple characteristics (e.g., geology environment and access) as well as spatial data on estimated non-exploited hydropower resources.« less

Utilizing inheritance in requirements engineering

NASA Technical Reports Server (NTRS)

Kaindl, Hermann

1994-01-01

The scope of this paper is the utilization of inheritance for requirements specification, i.e., the tasks of analyzing and modeling the domain, as well as forming and defining requirements. Our approach and the tool supporting it are named RETH (Requirements Engineering Through Hypertext). Actually, RETH uses a combination of various technologies, including object-oriented approaches and artificial intelligence (in particular frames). We do not attempt to exclude or replace formal representations, but try to complement and provide means for gradually developing them. Among others, RETH has been applied in the CERN (Conseil Europeen pour la Rechereche Nucleaire) Cortex project. While it would be impossible to explain this project in detail here, it should be sufficient to know that it deals with a generic distributed control system. Since this project is not finished yet, it is difficult to state its size precisely. In order to give an idea, its final goal is to substitute the many existing similar control systems at CERN by this generic approach. Currently, RETH is also tested using real-world requirements for the Pastel Mission Planning System at ESOC in Darmstadt. First, we outline how hypertext is integrated into a frame system in our approach. Moreover, the usefulness of inheritance is demonstrated as performed by the tool RETH. We then summarize our experiences of utilizing inheritance in the Cortex project. Lastly, RETH will be related to existing work.

Light-Stimulated Synaptic Devices Utilizing Interfacial Effect of Organic Field-Effect Transistors.

PubMed

Dai, Shilei; Wu, Xiaohan; Liu, Dapeng; Chu, Yingli; Wang, Kai; Yang, Ben; Huang, Jia

2018-06-14

Synaptic transistors stimulated by light waves or photons may offer advantages to the devices, such as wide bandwidth, ultrafast signal transmission, and robustness. However, previously reported light-stimulated synaptic devices generally require special photoelectric properties from the semiconductors and sophisticated device's architectures. In this work, a simple and effective strategy for fabricating light-stimulated synaptic transistors is provided by utilizing interface charge trapping effect of organic field-effect transistors (OFETs). Significantly, our devices exhibited highly synapselike behaviors, such as excitatory postsynaptic current (EPSC) and pair-pulse facilitation (PPF), and presented memory and learning ability. The EPSC decay, PPF curves, and forgetting behavior can be well expressed by mathematical equations for synaptic devices, indicating that interfacial charge trapping effect of OFETs can be utilized as a reliable strategy to realize organic light-stimulated synapses. Therefore, this work provides a simple and effective strategy for fabricating light-stimulated synaptic transistors with both memory and learning ability, which enlightens a new direction for developing neuromorphic devices.

The Value of Risk Pooling for Mitigating Water Utility Financial Risks Arising From Water Scarcity

NASA Astrophysics Data System (ADS)

Baum, R.; Characklis, G. W.; Hughes, J.; Eskaf, S.

2015-12-01

Water utilities across the United States face growing supply risks as demand growth and extreme weather events make water scarcity more common. As it has become more difficult and expensive to build new supply capacity to accommodate these events, many utility managers respond by either imposing conservation measures, which reduces revenues, or acquiring additional water from other sources, which increases costs. These actions lead to changing financial trends that are difficult to predict and that utilities are currently ill-equipped to manage. As a result, adaptation strategies and tools are being developed to reduce utility vulnerabilities, ensuring both financial stability and continued access to low cost financing, a critical consideration for a capital intensive industry. Previous work in this area has involved the development of utility specific financial hedging tools. However, the time and informational requirements associated with developing these individualized strategies may be a limiting factor for widespread implementation. The objective of this research is to develop more generalized hedging instruments that can be applied simultaneously to multiple utilities across the United States, thereby increasing the potential for widespread implementation. This work first analyzes the financial risks of water scarcity for a large set of water utilities across the country and then proposes a financial hedging solution to mitigate these risks through hydrologic index-based financial insurance. Results provide insights into the most effective indices, the potential for risk pooling to reduce insurance costs, and the performance of these contracts in managing utility financial risk arising from drought.

48 CFR 52.236-9 - Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... preserve and protect all structures, equipment, and vegetation (such as trees, shrubs, and grass) on or... work required under this contract. The Contractor shall only remove trees when specifically authorized... trees are broken during contract performance, or by the careless operation of equipment, or by workmen...

ERMes: Open Source Simplicity for Your E-Resource Management

ERIC Educational Resources Information Center

Doering, William; Chilton, Galadriel

2009-01-01

ERMes, the latest version of electronic resource management system (ERM), is a relational database; content in different tables connects to, and works with, content in other tables. ERMes requires Access 2007 (Windows) or Access 2008 (Mac) to operate as the database utilizes functionality not available in previous versions of Microsoft Access. The…

Obstacles to Mathematization in Physics: The Case of the Differential

ERIC Educational Resources Information Center

López-Gay, R.; Martinez Sáez, J.; Martinez Torregrosa, J.

2015-01-01

The process of the mathematization of physical situations through differential calculus requires an understanding of the justification for and the meaning of the differential in the context of physics. In this work, four different conceptions about the differential in physics are identified and assessed according to their utility for the…

Development of a Two-Year Associate Arts Degree in Environmental Health Technology.

ERIC Educational Resources Information Center

Campbell, Charles R.

The field of Environmental Health Technology (EHT) encompasses both the equipment and the trained expertise required to utilize land, water, energy, and minerals in the service of human health and welfare. EHT technicians work in disease control, licensing bureaus, hospitals, nursing homes, hazardous waste agencies, and other health agencies. In…

48 CFR 52.236-9 - Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... preserve and protect all structures, equipment, and vegetation (such as trees, shrubs, and grass) on or... work required under this contract. The Contractor shall only remove trees when specifically authorized... trees are broken during contract performance, or by the careless operation of equipment, or by workmen...

48 CFR 52.236-9 - Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... preserve and protect all structures, equipment, and vegetation (such as trees, shrubs, and grass) on or... work required under this contract. The Contractor shall only remove trees when specifically authorized... trees are broken during contract performance, or by the careless operation of equipment, or by workmen...

48 CFR 52.236-9 - Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... preserve and protect all structures, equipment, and vegetation (such as trees, shrubs, and grass) on or... work required under this contract. The Contractor shall only remove trees when specifically authorized... trees are broken during contract performance, or by the careless operation of equipment, or by workmen...

48 CFR 52.236-9 - Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... preserve and protect all structures, equipment, and vegetation (such as trees, shrubs, and grass) on or... work required under this contract. The Contractor shall only remove trees when specifically authorized... trees are broken during contract performance, or by the careless operation of equipment, or by workmen...

Planetary materials and resource utilization: An interdisciplinary engineering design course at Michigan Technological University

NASA Technical Reports Server (NTRS)

Rose, W. I.; Paces, J. B.; Chesner, C. A.; Pletka, B. J.; Hellawell, A.; Kawatra, S. K.; Pilling, J. E.

1990-01-01

A new course was developed and instituted in the spring quarter of 1989 dealing with topics related to space resource utilization and related engineering. The course development required a concerted, coordinated effort, because a similar course which might be used as a guide could not be identified anywhere and the interdisciplinary perspective that was required was not identified anywhere on the university campus. Students in the class worked on interdisciplinary design projects which culminated in papers and oral presentations. Each of the six design groups consisted of several engineers with different disciplinary roots. The entire course lecture sequence, about 50 hours in all, was videotaped. Discussed here are the authors' experiences in developing the course, including the course syllabus and speaker list.

Electric Vehicle Communication Standards Testing and Validation Phase I: SAE J2847/1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pratt, Richard M.; Tuffner, Francis K.; Gowri, Krishnan

Executive Summary Vehicle to grid communication standards are critical to the charge management and interoperability among vehicles, charging stations and utility providers. Several standards initiatives by the Society of Automobile Engineers (SAE), International Standards Organization and International Electrotechnical Commission (ISO/IEC), and ZigBee / HomePlug Alliance are developing requirements for communication messages and protocols. While the standard development is in progress for more than two years, no definitive guidelines are available for the automobile manufacturers, charging station manufacturers and utility backhaul network systems. At present, there is a wide range of proprietary communication options developed and supported in the industry. Recentmore » work by the Electric Power Research Institute (EPRI) in collaboration with SAE and automobile manufacturers has identified performance requirements and test plan based on possible communication pathways using power line communication over the control pilot and mains. Though the communication pathways and power line communication technology options are identified, much work needs to be done in developing application software and testing of communication modules before these can be deployed in production vehicles. This report presents a test plan and results from initial testing of two power line communication modules developed to meet the requirements of SAE J2847/1 standard.« less

Technologies for Upgrading Light Water Reactor Outlet Temperature

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniel S. Wendt; Piyush Sabharwall; Vivek Utgikar

Nuclear energy could potentially be utilized in hybrid energy systems to produce synthetic fuels and feedstocks from indigenous carbon sources such as coal and biomass. First generation nuclear hybrid energy system (NHES) technology will most likely be based on conventional light water reactors (LWRs). However, these LWRs provide thermal energy at temperatures of approximately 300°C, while the desired temperatures for many chemical processes are much higher. In order to realize the benefits of nuclear hybrid energy systems with the current LWR reactor fleets, selection and development of a complimentary temperature upgrading technology is necessary. This paper provides an initial assessmentmore » of technologies that may be well suited toward LWR outlet temperature upgrading for powering elevated temperature industrial and chemical processes during periods of off-peak power demand. Chemical heat transformers (CHTs) are a technology with the potential to meet LWR temperature upgrading requirements for NHESs. CHTs utilize chemical heat of reaction to change the temperature at which selected heat sources supply or consume thermal energy. CHTs could directly utilize LWR heat output without intermediate mechanical or electrical power conversion operations and the associated thermodynamic losses. CHT thermal characteristics are determined by selection of the chemical working pair and operating conditions. This paper discusses the chemical working pairs applicable to LWR outlet temperature upgrading and the CHT operating conditions required for providing process heat in NHES applications.« less

Blister pouches for effective reagent storage and release for low cost point-of-care diagnostic applications

NASA Astrophysics Data System (ADS)

Smith, Suzanne; Sewart, Rene; Land, Kevin; Roux, Pieter; Gärtner, Claudia; Becker, Holger

2016-03-01

Lab-on-a-chip devices are often applied to point-of-care diagnostic solutions as they are low-cost, compact, disposable, and require only small sample volumes. For such devices, various reagents are required for sample preparation and analysis and, for an integrated solution to be realized, on-chip reagent storage and automated introduction are required. This work describes the implementation and characterization of effective liquid reagent storage and release mechanisms utilizing blister pouches applied to various point-of-care diagnostic device applications. The manufacturing aspects as well as performance parameters are evaluated.

Design of a Mechanical NaK Pump for Fission Space Power Systems

NASA Technical Reports Server (NTRS)

Mireles, Omar R.; Bradley, David; Godfroy, Thomas

2010-01-01

Alkali liquid metal cooled fission reactor concepts are under development for mid-range spaceflight power requirements. One such concept utilizes a sodium-potassium eutectic (NaK) as the primary loop working fluid. Traditionally, linear induction pumps have been used to provide the required flow and head conditions for liquid metal systems but can be limited in performance. This paper details the design, build, and check-out test of a mechanical NaK pump. The pump was designed to meet reactor cooling requirements using commercially available components modified for high temperature NaK service.

Using Technical Performance Measures

NASA Technical Reports Server (NTRS)

Garrett, Christopher J.; Levack, Daniel J. H.; Rhodes, Russel E.

2011-01-01

All programs have requirements. For these requirements to be met, there must be a means of measurement. A Technical Performance Measure (TPM) is defined to produce a measured quantity that can be compared to the requirement. In practice, the TPM is often expressed as a maximum or minimum and a goal. Example TPMs for a rocket program are: vacuum or sea level specific impulse (lsp), weight, reliability (often expressed as a failure rate), schedule, operability (turn-around time), design and development cost, production cost, and operating cost. Program status is evaluated by comparing the TPMs against specified values of the requirements. During the program many design decisions are made and most of them affect some or all of the TPMs. Often, the same design decision changes some TPMs favorably while affecting other TPMs unfavorably. The problem then becomes how to compare the effects of a design decision on different TPMs. How much failure rate is one second of specific impulse worth? How many days of schedule is one pound of weight worth? In other words, how to compare dissimilar quantities in order to trade and manage the TPMs to meet all requirements. One method that has been used successfully and has a mathematical basis is Utility Analysis. Utility Analysis enables quantitative comparison among dissimilar attributes. It uses a mathematical model that maps decision maker preferences over the tradeable range of each attribute. It is capable of modeling both independent and dependent attributes. Utility Analysis is well supported in the literature on Decision Theory. It has been used at Pratt & Whitney Rocketdyne for internal programs and for contracted work such as the J-2X rocket engine program. This paper describes the construction of TPMs and describes Utility Analysis. It then discusses the use of TPMs in design trades and to manage margin during a program using Utility Analysis.

Working group organizational meeting

NASA Technical Reports Server (NTRS)

1982-01-01

Scene radiation and atmospheric effects, mathematical pattern recognition and image analysis, information evaluation and utilization, and electromagnetic measurements and signal handling are considered. Research issues in sensors and signals, including radar (SAR) reflectometry, SAR processing speed, registration, including overlay of SAR and optical imagery, entire system radiance calibration, and lack of requirements for both sensors and systems, etc. were discussed.

The Challenge of Leading Work Teams: Creating a Case Study to Enhance Learning

ERIC Educational Resources Information Center

Schraeder, Mike; Bandow, Diane

2016-01-01

The competitive success of organizations is heavily dependent on the quality of leadership within those organizations. Among the growing list of skills required for effective leadership is the need for leaders to promote the deployment of effective teams in the workplace. There are numerous strategies and methods that have been utilized to prepare…

Utilization and cost of log production from animal loging operations

Treesearch

Suraj P. Shrestha; Bobby L. Lanford; Robert B. Rummer; Mark Dubois

2006-01-01

Forest harvesting with animals is a labor-intensive operation. It is expensive to use machines on smaller woodlots, which require frequent moves if mechanically logged. So, small logging systems using animals may be more cost effective. In this study, work sampling was used for five animal logging operations in Alabama to measure productive and non-productive time...

Power in Play: A Foucauldian Reading of A.O. Soyinka's "The Trials of Brother Jero"

ERIC Educational Resources Information Center

Davoodifar, Mahboobeh; Asl, Moussa Pourya

2015-01-01

This work utilizes Foucault's articulations on the power strategies of our contemporary society. To him the subject's constitution is never a purely passive effect of power on the subject but requires the subject's own activity. This necessitates the existence of a dynamic, mutually affecting relationship, implying that one can be both dominated…

A note on the modelling of circular smallholder migration.

PubMed

Bigsten, A

1988-01-01

"It is argued that circular migration [in Africa] should be seen as an optimization problem, where the household allocates its labour resources across activities, including work which requires migration, so as to maximize the joint family utility function. The migration problem is illustrated in a simple diagram, which makes it possible to analyse economic aspects of migration." excerpt

Maximum saliency bias in binocular fusion

NASA Astrophysics Data System (ADS)

Lu, Yuhao; Stafford, Tom; Fox, Charles

2016-07-01

Subjective experience at any instant consists of a single ("unitary"), coherent interpretation of sense data rather than a "Bayesian blur" of alternatives. However, computation of Bayes-optimal actions has no role for unitary perception, instead being required to integrate over every possible action-percept pair to maximise expected utility. So what is the role of unitary coherent percepts, and how are they computed? Recent work provided objective evidence for non-Bayes-optimal, unitary coherent, perception and action in humans; and further suggested that the percept selected is not the maximum a posteriori percept but is instead affected by utility. The present study uses a binocular fusion task first to reproduce the same effect in a new domain, and second, to test multiple hypotheses about exactly how utility may affect the percept. After accounting for high experimental noise, it finds that both Bayes optimality (maximise expected utility) and the previously proposed maximum-utility hypothesis are outperformed in fitting the data by a modified maximum-salience hypothesis, using unsigned utility magnitudes in place of signed utilities in the bias function.

The economical utilization of geothermal energy

NASA Astrophysics Data System (ADS)

Rose, G.

1982-12-01

The geothermal energy which is stored in hot dry rock could be theoretically utilized for the generation of power. The hot-dry-rock procedure can provide a flow of hot water. The considered binary system can transform the obtained thermal energy into electrical energy. The system makes use of a Rankine cycle with a working fluid having a low boiling point. Heat from the hot water is transferred to the working fluid. The present investigation is concerned with the development of a method for the calculation of the entire process. The results obtained with the computational method are to provide a basis for the determination of the operational characteristics. The development method is used for the study of a process based on the use of carbon dioxide as working fluid. The economics of a use of the hot-dry-rock process with the binary system is also investigated. It is found that the considered procedure is not economical. Economical operation requires, in particular, hot water supplied at a much lower cost.

Gas-Dynamic Designing of the Exhaust System for the Air Brake

NASA Astrophysics Data System (ADS)

Novikova, Yu; Goriachkin, E.; Volkov, A.

2018-01-01

Each gas turbine engine is tested some times during the life-cycle. The test equipment includes the air brake that utilizes the power produced by the gas turbine engine. In actual conditions, the outlet pressure of the air brake does not change and is equal to atmospheric pressure. For this reason, for the air brake work it is necessary to design the special exhaust system. Mission of the exhaust system is to provide the required level of backpressure at the outlet of the air brake. The backpressure is required for the required power utilization by the air brake (the air brake operation in the required points on the performance curves). The paper is described the development of the gas dynamic canal, designing outlet guide vane and the creation of a unified exhaust system for the air brake. Using a unified exhaust system involves moving the operating point to the performance curve further away from the calculated point. However, the applying of one exhaust system instead of two will significantly reduce the cash and time costs.

Software Requirements Specification for Lunar IceCube

NASA Astrophysics Data System (ADS)

Glaser-Garbrick, Michael R.

Lunar IceCube is a 6U satellite that will orbit the moon to measure water volatiles as a function of position, altitude, and time, and measure in its various phases. Lunar IceCube, is a collaboration between Morehead State University, Vermont Technical University, Busek, and NASA. The Software Requirements Specification will serve as contract between the overall team and the developers of the flight software. It will provide a system's overview of the software that will be developed for Lunar IceCube, in that it will detail all of the interconnects and protocols for each subsystem's that Lunar IceCube will utilize. The flight software will be written in SPARK to the fullest extent, due to SPARK's unique ability to make software free of any errors. The LIC flight software does make use of a general purpose, reusable application framework called CubedOS. This framework imposes some structuring requirements on the architecture and design of the flight software, but it does not impose any high level requirements. It will also detail the tools that we will be using for Lunar IceCube, such as why we will be utilizing VxWorks.

NASA Supportability Engineering Implementation Utilizing DoD Practices and Processes

NASA Technical Reports Server (NTRS)

Smith, David A.; Smith, John V.

2010-01-01

The Ares I design and development program made the determination early in the System Design Review Phase to utilize DoD ILS and LSA approach for supportability engineering as an integral part of the system engineering process. This paper is to provide a review of the overall approach to design Ares-I with an emphasis on a more affordable, supportable, and sustainable launch vehicle. Discussions will include the requirements development, design influence, support concept alternatives, ILS and LSA planning, Logistics support analyses/trades performed, LSA tailoring for NASA Ares Program, support system infrastructure identification, ILS Design Review documentation, Working Group coordination, and overall ILS implementation. At the outset, the Ares I Project initiated the development of the Integrated Logistics Support Plan (ILSP) and a Logistics Support Analysis process to provide a path forward for the management of the Ares-I ILS program and supportability analysis activities. The ILSP provide the initial planning and coordination between the Ares-I Project Elements and Ground Operation Project. The LSA process provided a system engineering approach in the development of the Ares-I supportability requirements; influence the design for supportability and development of alternative support concepts that satisfies the program operability requirements. The LSA planning and analysis results are documented in the Logistics Support Analysis Report. This document was required during the Ares-I System Design Review (SDR) and Preliminary Design Review (PDR) review cycles. To help coordinate the LSA process across the Ares-I project and between programs, the LSA Report is updated and released quarterly. A System Requirement Analysis was performed to determine the supportability requirements and technical performance measurements (TPMs). Two working groups were established to provide support in the management and implement the Ares-I ILS program, the Integrated Logistics Support Working Group (ILSWG) and the Logistics Support Analysis Record Working Group (LSARWG). The Ares I ILSWG is established to assess the requirements and conduct, evaluate analyses and trade studies associated with acquisition logistic and supportability processes and to resolve Ares I integrated logistics and supportability issues. It established a strategic collaborative alliance for coordination of Logistics Support Analysis activates in support of the integrated Ares I vehicle design and development of logistics support infrastructure. A Joint Ares I - Orion LSAR Working Group was established to: 1) Guide the development of Ares-I and Orion LSAR data and serve as a model for future Constellation programs, 2) Develop rules and assumptions that will apply across the Constellation program with regards to the program's LSAR development, and 3) Maintain the Constellation LSAR Style Guide.

A fast collocation method for a variable-coefficient nonlocal diffusion model

NASA Astrophysics Data System (ADS)

Wang, Che; Wang, Hong

2017-02-01

We develop a fast collocation scheme for a variable-coefficient nonlocal diffusion model, for which a numerical discretization would yield a dense stiffness matrix. The development of the fast method is achieved by carefully handling the variable coefficients appearing inside the singular integral operator and exploiting the structure of the dense stiffness matrix. The resulting fast method reduces the computational work from O (N3) required by a commonly used direct solver to O (Nlog ⁡ N) per iteration and the memory requirement from O (N2) to O (N). Furthermore, the fast method reduces the computational work of assembling the stiffness matrix from O (N2) to O (N). Numerical results are presented to show the utility of the fast method.

Development of a Work Control System for Propulsion Testing at NASA Stennis

NASA Technical Reports Server (NTRS)

Messer, Elizabeth A.

2005-01-01

In 1996 Stennis Space Center was given management authority for all Propulsion Testing for NASA. Over the next few years several research and development (R&D) test facilities were completed and brought up to full operation in what is known as the E-Complex Test Facility at Stennis Space Center. To construct, activate and operate these test facilities, a manual paper-based work control system was created. After utilizing this paper-based work control system for approximately three years, it became apparent that the research and development test area needed a better method to execute, monitor, and report on tasks required to further propulsion testing. The paper based system did not provide the engineers adequate visibility into work tasks or the tracking of testing or hardware discrepancies. This system also restricted the engineer s ability to utilize and access past knowledge and experiences given the severe schedule limitations for most R&D propulsion testing projects. Therefore a system was developed to meet the growing need of Test Operations called the Propulsion Test Directorate (PTD) Work Control System. This system is used to plan, perform, and track tasks that support testing and also to capture lessons learned while doing so.

The complex physiology of Cellvibrio japonicus xylan degradation relies on a single cytoplasmic β-xylosidase for xylo-oligosaccharide utilization

DOE PAGES

Blake, Andrew D.; Beri, Nina R.; Guttman, Hadassa S.; ...

2017-12-21

Lignocellulose degradation by microbes plays a central role in global carbon cycling, human gut metabolism, and renewable energy technologies. While considerable effort has been put into understanding the biochemical aspects of lignocellulose degradation, much less work has been done to understand how these enzymes work in an in vivo context. Here in this paper, we report a systems level study of xylan degradation in the saprophytic bacterium Cellvibrio japonicus. Transcriptome analysis indicated seven genes that encode carbohydrate active enzymes were up-regulated during growth with xylan containing media. In-frame deletion analysis of these genes found that only gly43F is critical formore » utilization of xylo-oligosaccharides, xylan, and arabinoxylan. Heterologous expression of gly43F was sufficient for the utilization of xylo-oligosaccharides in Escherichia coli. Additional analysis found that the xyn11A, xyn11B, abf43L, abf43K, and abf51A gene products were critical for utilization of arabinoxylan. Furthermore, a predicted transporter (CJA_1315) was required for effective utilization of xylan substrates, and we propose this unannotated gene be called xntA (xylan transporter A). Our major findings are 1) C. japonicus employs both secreted and surface associated enzymes for xylan degradation, which differs from the strategy used for cellulose degradation, and 2) a single cytoplasmic β-xylosidase is essential for the utilization of xylo-oligosaccharides.« less

The complex physiology of Cellvibrio japonicus xylan degradation relies on a single cytoplasmic β-xylosidase for xylo-oligosaccharide utilization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blake, Andrew D.; Beri, Nina R.; Guttman, Hadassa S.

Lignocellulose degradation by microbes plays a central role in global carbon cycling, human gut metabolism, and renewable energy technologies. While considerable effort has been put into understanding the biochemical aspects of lignocellulose degradation, much less work has been done to understand how these enzymes work in an in vivo context. Here in this paper, we report a systems level study of xylan degradation in the saprophytic bacterium Cellvibrio japonicus. Transcriptome analysis indicated seven genes that encode carbohydrate active enzymes were up-regulated during growth with xylan containing media. In-frame deletion analysis of these genes found that only gly43F is critical formore » utilization of xylo-oligosaccharides, xylan, and arabinoxylan. Heterologous expression of gly43F was sufficient for the utilization of xylo-oligosaccharides in Escherichia coli. Additional analysis found that the xyn11A, xyn11B, abf43L, abf43K, and abf51A gene products were critical for utilization of arabinoxylan. Furthermore, a predicted transporter (CJA_1315) was required for effective utilization of xylan substrates, and we propose this unannotated gene be called xntA (xylan transporter A). Our major findings are 1) C. japonicus employs both secreted and surface associated enzymes for xylan degradation, which differs from the strategy used for cellulose degradation, and 2) a single cytoplasmic β-xylosidase is essential for the utilization of xylo-oligosaccharides.« less

Towards parameter-free classification of sound effects in movies

NASA Astrophysics Data System (ADS)

Chu, Selina; Narayanan, Shrikanth; Kuo, C.-C. J.

2005-08-01

The problem of identifying intense events via multimedia data mining in films is investigated in this work. Movies are mainly characterized by dialog, music, and sound effects. We begin our investigation with detecting interesting events through sound effects. Sound effects are neither speech nor music, but are closely associated with interesting events such as car chases and gun shots. In this work, we utilize low-level audio features including MFCC and energy to identify sound effects. It was shown in previous work that the Hidden Markov model (HMM) works well for speech/audio signals. However, this technique requires a careful choice in designing the model and choosing correct parameters. In this work, we introduce a framework that will avoid such necessity and works well with semi- and non-parametric learning algorithms.

Weighting Primary Care Patient Panel Size: A Novel Electronic Health Record-Derived Measure Using Machine Learning.

PubMed

Rajkomar, Alvin; Yim, Joanne Wing Lan; Grumbach, Kevin; Parekh, Ami

2016-10-14

Characterizing patient complexity using granular electronic health record (EHR) data regularly available to health systems is necessary to optimize primary care processes at scale. To characterize the utilization patterns of primary care patients and create weighted panel sizes for providers based on work required to care for patients with different patterns. We used EHR data over a 2-year period from patients empaneled to primary care clinicians in a single academic health system, including their in-person encounter history and virtual encounters such as telephonic visits, electronic messaging, and care coordination with specialists. Using a combination of decision rules and k-means clustering, we identified clusters of patients with similar health care system activity. Phenotypes with basic demographic information were used to predict future health care utilization using log-linear models. Phenotypes were also used to calculate weighted panel sizes. We identified 7 primary care utilization phenotypes, which were characterized by various combinations of primary care and specialty usage and were deemed clinically distinct by primary care physicians. These phenotypes, combined with age-sex and primary payer variables, predicted future primary care utilization with R 2 of .394 and were used to create weighted panel sizes. Individual patients' health care utilization may be useful for classifying patients by primary care work effort and for predicting future primary care usage.

Designing for human presence in space: An introduction to environmental control and life support systems

NASA Technical Reports Server (NTRS)

Wieland, Paul

1994-01-01

Human exploration and utilization of space requires habitats to provide appropriate conditions for working and living. These conditions are provided by environmental control and life support systems (ECLSS) that ensure appropriate atmosphere composition, pressure, and temperature; manage and distribute water, process waste matter, provide fire detection and suppression; and other functions as necessary. The functions that are performed by ECLSS are described and basic information necessary to design an ECLSS is provided. Technical and programmatic aspects of designing and developing ECLSS for space habitats are described including descriptions of technologies, analysis methods, test requirements, program organization, documentation requirements, and the requirements imposed by medical, mission, safety, and system needs. The design and development process is described from initial trade studies through system-level analyses to support operation. ECLSS needs for future space habitats are also described. Extensive listings of references and related works provide sources for more detailed information on each aspect of ECLSS design and development.

A Proposal for the use of the Consortium Method in the Design-build system

NASA Astrophysics Data System (ADS)

Miyatake, Ichiro; Kudo, Masataka; Kawamata, Hiroyuki; Fueta, Toshiharu

In view of the necessity for efficient implementation of public works projects, it is expected to utilize advanced technical skills of private firms, for the purpose of reducing project costs, improving performance and functions of construction objects, and reducing work periods, etc. The design-build system is a method to order design and construction as a single contract, including design of structural forms and main specifications of the construction object. This is a system in which high techniques of private firms can be utilized, as a means to ensure qualities of design and construction, rational design, and efficiency of the project. The objective of this study is to examine the use of a method to form a consortium of civil engineering consultants and construction companies, as it is an issue related to the implementation of the design-build method. Furthermore, by studying various forms of consortiums to be introduced in future, it proposes procedural items required to utilize this method, during the bid and after signing a contract, such as the estimate submission from the civil engineering consultants etc.

Analysis of the electrical harmonic characteristics of a slip recovery variable speed generating system for wind turbine applications

NASA Astrophysics Data System (ADS)

Herrera, J. I.; Reddoch, T. W.

1988-02-01

Variable speed electric generating technology can enhance the general use of wind energy in electric utility applications. This enhancement results from two characteristic properties of variable speed wind turbine generators: an improvement in drive train damping characteristics, which results in reduced structural loading on the entire wind turbine system, and an improvement in the overall efficiency by using a more sophisticated electrical generator. Electronic converter systems are the focus of this investigation -- in particular, the properties of a wound-rotor induction generator with the slip recovery system and direct-current link converter. Experience with solid-state converter systems in large wind turbines is extremely limited. This report presents measurements of electrical performances of the slip recovery system and is limited to the terminal characteristics of the system. Variable speed generating systems working effectively in utility applications will require a satisfactory interface between the turbine/generator pair and the utility network. The electrical testing described herein focuses largely on the interface characteristics of the generating system. A MOD-O wind turbine was connected to a very strong system; thus, the voltage distortion was low and the total harmonic distortion in the utility voltage was less than 3 percent (within the 5 percent limit required by most utilities). The largest voltage component of a frequency below 60 Hz was 40 dB down from the 60-Hz less than component.

Implementation of space satellite remote sensing programs in developing countries (Ecuador)

NASA Technical Reports Server (NTRS)

Segovia, A.

1982-01-01

The current state of space satellite remote sensing programs in developing countries is discussed. Sensors being utilized and results obtained are described. Requirements are presented for the research of resources in developing countries. It is recommended that a work procedure be developed for the use of satellite remote sensing data tailored to the necessities of the different countries.

Robotic Arm-Assisted Sonography: Review of Technical Developments and Potential Clinical Applications.

PubMed

Swerdlow, Daniel R; Cleary, Kevin; Wilson, Emmanuel; Azizi-Koutenaei, Bamshad; Monfaredi, Reza

2017-04-01

Ultrasound imaging requires trained personnel. Advances in robotics and data transmission create the possibility of telesonography. This review introduces clinicians to current technical work in and potential applications of this developing capability. Telesonography offers advantages in hazardous or remote environments. Robotically assisted ultrasound can reduce stress injuries in sonographers and has potential utility during robotic surgery and interventional procedures.

User Requirements in Identifying Desired Works in a Large Library. Final Report.

ERIC Educational Resources Information Center

Lipetz, Ben-Ami

Utilization of the card catalog in the main library (Sterling Memorial Library) of Yale University was studied over a period of more than a year. Traffic flow in the catalog was observed, and was used as the basis for scheduling interviews with a representative sample of catalog users at the moment of catalog use. More than 2000 interviews were…

Utilization of remote sensing techniques for the quantification of fire behavior in two pine stands

Treesearch

Eric V. Mueller; Nicholas Skowronski; Kenneth Clark; Michael Gallagher; Robert Kremens; Jan C. Thomas; Mohamad El Houssami; Alexander Filkov; Rory M. Hadden; William Mell; Albert Simeoni

2017-01-01

Quantification of field-scale fire behavior is necessary to improve the current scientific understanding of wildland fires and to develop and test relevant, physics-based models. In particular, detailed descriptions of individual fires are required, for which the available literature is limited. In this work, two such field-scale experiments, carried out in pine stands...

Making mLearning Work: Utilizing Mobile Technology for Active Exploration, Collaboration, Assessment, and Reflection in Higher Education

ERIC Educational Resources Information Center

Fisher, Mercedes; Baird, Derek E.

2007-01-01

The convergence of mobile technologies into student-centered learning environments requires academic institutions to design new and more effective learning, teaching, and user experience strategies. In this article we share results from an mLearning design experiment and analysis from a student survey conducted at the National College of Ireland.…

7 CFR 1710.203 - Requirement to prepare a load forecast-distribution borrowers.

Code of Federal Regulations, 2011 CFR

2011-01-01

...—distribution borrowers. (a) A distribution borrower that is a member of a power supply borrower with a total... forecast work plan of its power supply borrower. (b) A distribution borrower that is a member of a power supply borrower which is itself a member of another power supply borrower that has a total utility plant...

75 FR 35458 - National Drinking Water Advisory Council's Climate Ready Water Utilities Working Group Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-22

... supportive environment in which a utility can take steps to be climate ready. In this meeting, the Working... Ready Water Utilities Working Group Meeting Announcement AGENCY: Environmental Protection Agency (EPA... fourth in-person meeting of the Climate Ready Water Utilities (CRWU) Working Group of the National...

Parallel File System I/O Performance Testing On LANL Clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiens, Isaac Christian; Green, Jennifer Kathleen

2016-08-18

These are slides from a presentation on parallel file system I/O performance testing on LANL clusters. I/O is a known bottleneck for HPC applications. Performance optimization of I/O is often required. This summer project entailed integrating IOR under Pavilion and automating the results analysis. The slides cover the following topics: scope of the work, tools utilized, IOR-Pavilion test workflow, build script, IOR parameters, how parameters are passed to IOR, *run_ior: functionality, Python IOR-Output Parser, Splunk data format, Splunk dashboard and features, and future work.

Lunar construction utility vehicle

NASA Technical Reports Server (NTRS)

1989-01-01

The lunar construction utility vehicle (LCUV) is an all-purpose construction vehicle which will aid in the robotic assembly of a lunar outpost. The LCUV will have the following capabilities: (1) must be self supporting including repairs; (2) must offload itself from a lunar lander; (3) must be telerobotic and semi-autonomous; (4) must be able to transport one space station common module; (5) must allow for man-rated operation; and (6) must be able to move lunar regolith for site preparation. This study recommends the use of an elastic tracked vehicle. Detailed material analyses of most of the LCUV components were accomplished. The body frame, made of pinned truss elements, was stress analyzed using NASTRAN. A track connection system was developed; however, kinematic and stress analyses are still required. This design recommends the use of hydrogen-oxygen fuel cells for power. Thermal control has proven to be a problem which may be the most challenging technically. A tentative solution has been proposed which utilizes an onboard and towable radiator. Detailed study of the heat dissipation requirements is needed to finalize radiator sizing. Preliminary work on a man-rated cabin has begun; however, this is not required during the first mission phase of the LCUV. Finally, still in the conceptual phases, are the communication, navigation and mechanical arm systems.

Analysis of the implementation of ergonomic design at the new units of an oil refinery.

PubMed

Passero, Carolina Reich Marcon; Ogasawara, Erika Lye; Baú, Lucy Mara Silva; Buso, Sandro Artur; Bianchi, Marcos Cesar

2012-01-01

Ergonomic design is the adaptation of working conditions to human limitations and skills in the physical design phase of a new installation, a new working system, or new products or tools. Based on this concept, the purpose of this work was to analyze the implementation of ergonomic design at the new industrial units of an oil refinery, using the method of Ergonomic Workplace Assessment. This study was conducted by a multidisciplinary team composed of operation, maintenance and industrial safety technicians, ergonomists, designers and engineers. The analysis involved 6 production units, 1 industrial wastewater treatment unit, and 3 utilities units, all in the design detailing phase, for which 455 ergonomic requirements were identified. An analysis and characterization of the requirements identified for 5 of the production units, involving a total of 246 items, indicated that 62% were related to difficult access and blockage operations, while 15% were related to difficulties in the circulation of employees inside the units. Based on these data, it was found that the ergonomic requirements identified in the design detailing phase of an industrial unit involve physical ergonomics, and that it is very difficult to identify requirements related to organizational or cognitive ergonomics.

Integrated two-cylinder liquid piston Stirling engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Ning; Rickard, Robert; Pluckter, Kevin

2014-10-06

Heat engines utilizing the Stirling cycle may run on low temperature differentials with the capacity to function at high efficiency due to their near-reversible operation. However, current approaches to building Stirling engines are laborious and costly. Typically the components are assembled by hand and additional components require a corresponding increase in manufacturing complexity, akin to electronics before the integrated circuit. We present a simple and integrated approach to fabricating Stirling engines with precisely designed cylinders. We utilize computer aided design and one-step, planar machining to form all components of the engine. The engine utilizes liquid pistons and displacers to harnessmore » useful work from heat absorption and rejection. As a proof of principle of the integrated design, a two-cylinder engine is produced and characterized and liquid pumping is demonstrated.« less

Integrated two-cylinder liquid piston Stirling engine

NASA Astrophysics Data System (ADS)

Yang, Ning; Rickard, Robert; Pluckter, Kevin; Sulchek, Todd

2014-10-01

Heat engines utilizing the Stirling cycle may run on low temperature differentials with the capacity to function at high efficiency due to their near-reversible operation. However, current approaches to building Stirling engines are laborious and costly. Typically the components are assembled by hand and additional components require a corresponding increase in manufacturing complexity, akin to electronics before the integrated circuit. We present a simple and integrated approach to fabricating Stirling engines with precisely designed cylinders. We utilize computer aided design and one-step, planar machining to form all components of the engine. The engine utilizes liquid pistons and displacers to harness useful work from heat absorption and rejection. As a proof of principle of the integrated design, a two-cylinder engine is produced and characterized and liquid pumping is demonstrated.

Utilization of plasmas for graphene synthesis

NASA Astrophysics Data System (ADS)

Shashurin, Alexey; Keidar, Michael

2013-10-01

Graphene is a one-atom-thick planar sheet of carbon atoms that are densely packed in a honeycomb crystal lattice. Grapheen has tremendous range of potential applications ranging from high-speed transistors to electrochemical energy storage devices and biochemical sensors. Methods of graphene synthesis include mechanical exfoliation, epitaxial growth on SiC, CVD and colloidal suspensions. In this work the utilization of plasmas in synthesis process is considered. Types of carbonaceous structures produced by the anodic arc and regions of their synthesis were studied. Ultimate role of substrate temperature and transformations occurring with various carbonaceous structures generated in plasma discharge were considered. Formation of graphene film on copper substrate was detected at temperatures around the copper melting point. The film was consisted of several layers graphene flakes having typical sizes of about 200 nm. Time required for crystallization of graphene on externally heated substrates was determined. This work was supported by National Science Foundation (NSF Grant No. CBET-1249213).

Neuropsychological and MMPI correlates of patients' future employment characteristics.

PubMed

Newnan, O S; Heaton, R K; Lehman, R A

1978-04-01

Previous research has suggested that patients' neuropsychological test scores correlate not only with neurologic status but also with their success in coping with some of the demands of daily living. This study investigated the utility of such laboratory test scores in predicting several vocational variables. Patients who had recieved neuropsychological evaluations were recontacted and questioned about their employment over the previous 6 mo. Of the 78 individuals who participated, 25 had been chronically unemployed. The remaining 53 were asked about job stability, hours worked, and wages earned, and were administered the Minnsota Job Requirements Questionnaire. Patients' scores on the Halstead-Reitan Battery, the WAIS and the MMPI were highly correlated with employment status (employed or chronically unemployed), income, and skills required on the jobs held. The results suggest that these tests may have clinical utility in assessing patients' employability, as well as the types of jobs for which they are suited.

Implications of outer-zone radiations on operations in the geostationary region utilizing the ae4 environmental model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, J.W.; Denn, F.M.

1977-05-01

The radiation exposure in the region of geostationary orbits is examined in search for means of optimizing human performance. It is found that the use of slightly inclined circular orbits is one means by which exposure and spacesuit thickness requirements can be reduced. Another effective technique is to limit the extravehicular activity to those days when the short term fluctuations result in low exposure. Space-suit shielding approaching 1/2 sq cm or less may be possible by utilizing work stoppages and inclined orbits. If aluminum and other low-atomic-number materials are used to construct the habitat, then excessive wall thicknesses are required.more » If special bremsstrahlung shielding is used, then the habitat shield may be reduced to as low as 2 g/sq cm. Numerous tables and graphs are presented for future analysis of dose in the geostationary region.« less

Energy Division annual progress report for period ending September 30, 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report covers work done during FY 1983 by the staff of the Energy Division and its subcontractors and by colleagues in other Oak Ridge National Laboratory divisions working on Energy Division projects. The work can be divided into four areas: (1) analysis and assessment, (2) models and data systems, (3) research to improve the efficiency of energy use and to improve electric power transmission and distribution, and (4) research utilization. Support came principally from the US Department of Energy (DOE), the US Nuclear Regulatory Commission, and the US Department of Defense, but also from a number of other agenciesmore » and organizations. Analysis and assessment included work on (a) environmental issues, including those deriving from the preparation of environmental impact statements; (b) energy and resource analysis; and (c) emergency preparedness. The models and data systems area involved research on evaluating and developing energy, environment, and engineering simulation models and on devising large data management systems, evaluating user data requirements, and compiling data bases. Research on improving the efficiency of energy use was focused primarily on the buildings and electricity sectors. A major effort on heat pump technology, which includes both heat-activated and electrically driven systems, continues. An important aspect of all the work was research utilization. Since the Energy Division is doing applied research, results are, by definition, intended to solve problems or answer questions of DOE and other sponsors. However, there are other users, and research utilization activities include technology transfer, commercialization efforts, outreach to state and regional organizations, and, of course, information dissemination.« less

Proceedings of Small Power Systems Solar Electric Workshop. Volume 2: Invited papers

NASA Technical Reports Server (NTRS)

Ferber, R. (Editor)

1978-01-01

The focus of this work shop was to present the committment to the development of solar thermal power plants for a variety of applications including utility applications. Workshop activities included panel discussions, formal presentations, small group interactive discussions, question and answer periods, and informal gatherings. Discussion on topics include: (1) solar power technology options; (2) solar thermal power programs currently underway at the DOE, JPL, Electric Power Research Institute (EPRI), and Solar Energy Research Institute (SERI); (3) power options competing with solar; (4) institutional issues; (5) environmental and siting issues; (6) financial issues; (7) energy storage; (8) site requirements for experimental solar installations, and (9) utility planning.

CAD/CAM approach to improving industry productivity gathers momentum

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1982-01-01

Recent results and planning for the NASA/industry Integrated Programs for Aerospace-Vehicle Design (IPAD) program for improving productivity with CAD/CAM methods are outlined. The industrial group work is being mainly done by Boeing, and progress has been made in defining the designer work environment, developing requirements and a preliminary design for a future CAD/CAM system, and developing CAD/CAM technology. The work environment was defined by conducting a detailed study of a reference design process, and key software elements for a CAD/CAM system have been defined, specifically for interactive design or experiment control processes. Further work is proceeding on executive, data management, geometry and graphics, and general utility software, and dynamic aspects of the programs being developed are outlined

Space assembly fixtures and aids

NASA Technical Reports Server (NTRS)

Bloom, K. A.; Lillenas, A. N.

1980-01-01

Concepts and requirements for assembly fixtures and aids necessary for the assembly and maintenance of spare platforms were studied. Emphasis was placed on erectable and deployable type structures with the shuttle orbiter as the assembly base. Both single and multiple orbiter flight cases for the platform assembly were considered. Applicable space platform assembly studies were reviewed to provide a data base for establishing the assembly fixture and aids design requirements, assembly constraints, and the development of representative design concepts. Conclusions indicated that fixture requirements will vary with platform size. Larger platforms will require translation relative to the orbiter RMS working volume. The installation of platform payloads and subsystems (e.g., utility distribution) must also be considered in the specification of assembly fixtures and aids.

Improving a web-based employability intervention for work-disabled employees: results of a pilot economic evaluation.

PubMed

Noben, Cindy; Evers, Silvia; Genabeek, Joost van; Nijhuis, Frans; de Rijk, Angelique

2017-04-01

Purpose The purpose of this study is to improve web-based employability interventions for employees with work-related health problems for both intervention content and study design by means of a pilot economic evaluation. Methods Uptake rate analysis for the intervention elements, cost effectiveness, cost utility and subgroup analyses were conducted to identify potential content-related intervention improvements. Differences in work ability and quality-adjusted life years and overall contribution of resource items to the total costs were assessed. These were used to guide study design improvements. Results Sixty-three participants were a-select allocated to either the intervention (n = 29) or the control (n = 34) group. Uptake regarding the intervention elements ranged between 3% and 70%. Cost-effectiveness and cost-utility analyses resulted in negative effects although higher total costs. Incremental effects were marginal (work ability -0.51; QALY -0.01). Conclusions The web-based tool to enhance employability among work disabled employees requires improvements regarding targeting and intensity; outcome measures selected and collection of cost data. With respect to the studies of disability and rehabilitation, the findings and methods presented in this pilot economic evaluation could guide the assessment of future assistive "e-health" technologies. IMPLICATIONS FOR REHABILITATION The methods presented in this pilot economic evaluation have large potentials to guide the assessment of future assistive e-health technologies addressing work-disabilities. The findings show that the web-based tool requires content related improvements with respect to targeting and intensity to enhance employability among work disabled employees. The findings show that the web-based tool would benefit from improvements related to the study design by more adequately selecting and collecting both outcome measures and cost data. The burden attributable to large-scale studies and implementation issues were prevented as the outcomes of the pilot economic evaluation did not support the implementation of the web-based tool.

Methods to Assess the Utility of Proxies

DTIC Science & Technology

1990-08-01

PROXIES Gottfredson [5 has reviewed ways to analyze potential proxies for the National Academy of Science committee that oversees the work of the...distribution might get the highest possible scores on the test. Together, the Gottfredson and Allred papers suggest that different analyses are required...summarizes the implications of the Gottfredson and Allred papers. These two papers suggest that different kinds of analyses should be done, depending

Why Tu Youyou Makes Less Money Than Zhang Ziyi?

PubMed

Suo, Qinghui; Liu, Yang; Zhang, Daming

2017-08-01

Scientists normally earn less money than many other professions which require a similar amount of training and qualification. The economic theory of marginal utility and cost-benefit analysis can be applied to explain this phenomenon. Although scientists make less money than entertainment stars, the scientists do research work out of their interest and they also enjoy a much higher reputation and social status in some countries.

29 CFR 1919.14 - Initial tests of cargo gear and tests after alterations, renewals or repairs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... components, a test as required in paragraph (a)(1) of this section shall be carried out. (d) If the operation in which cargo gear is engaged never utilizes more than a fraction of the safe working load rating, the owner may, at his option, have said gear certificated for, and limited in operation to, a lesser...

Analysis of regional brain mitochondrial bioenergetics and susceptibility to mitochondrial inhibition utilizing a microplate based system

PubMed Central

Sauerbeck, Andrew; Pandya, Jignesh; Singh, Indrapal; Bittman, Kevin; Readnower, Ryan; Bing, Guoying; Sullivan, Patrick

2012-01-01

The analysis of mitochondrial bioenergetic function typically has required 50–100 μg of protein per sample and at least 15 min per run when utilizing a Clark-type oxygen electrode. In the present work we describe a method utilizing the Seahorse Biosciences XF24 Flux Analyzer for measuring mitochondrial oxygen consumption simultaneously from multiple samples and utilizing only 5 μg of protein per sample. Utilizing this method we have investigated whether regionally based differences exist in mitochondria isolated from the cortex, striatum, hippocampus, and cerebellum. Analysis of basal mitochondrial bioenergetics revealed that minimal differences exist between the cortex, striatum, and hippocampus. However, the cerebellum exhibited significantly slower basal rates of Complex I and Complex II dependent oxygen consumption (p < 0.05). Mitochondrial inhibitors affected enzyme activity proportionally across all samples tested and only small differences existed in the effect of inhibitors on oxygen consumption. Investigation of the effect of rotenone administration on Complex I dependent oxygen consumption revealed that exposure to 10 pM rotenone led to a clear time dependent decrease in oxygen consumption beginning 12 min after administration (p < 0.05). These studies show that the utilization of this microplate based method for analysis of mitochondrial bioenergetics is effective at quantifying oxygen consumption simultaneously from multiple samples. Additionally, these studies indicate that minimal regional differences exist in mitochondria isolated from the cortex, striatum, or hippocampus. Furthermore, utilization of the mitochondrial inhibitors suggests that previous work indicating regionally specific deficits following systemic mitochondrial toxin exposure may not be the result of differences in the individual mitochondria from the affected regions. PMID:21402103

41 CFR 101-42.1102-3 - Controlled substances.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS UTILIZATION AND DISPOSAL 42-UTILIZATION...) Utilization requirements. (1) Excess controlled substances are not required to be reported to GSA, but are subject to the utilization screening requirements of § 101-43.311-2. Holding agencies shall make...

Analysis of the electrical harmonic characteristics of a slip recovery variable speed generating system for wind turbine applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herrera, J.I.; Reddoch, T.W.

1988-02-01

Variable speed electric generating technology can enhance the general use of wind energy in electric utility applications. This enhancement results from two characteristic properties of variable speed wind turbine generators: an improvement in drive train damping characteristics, which results in reduced structural loading on the entire wind turbine system, and an improvement in the overall efficiency by using a more sophisticated electrical generator. Electronic converter systems are the focus of this investigation -- in particular, the properties of a wound-rotor induction generator with the slip recovery system and direct-current link converter. Experience with solid-state converter systems in large wind turbinesmore » is extremely limited. This report presents measurements of electrical performances of the slip recovery system and is limited to the terminal characteristics of the system. Variable speed generating systems working effectively in utility applications will require a satisfactory interface between the turbine/generator pair and the utility network. The electrical testing described herein focuses largely on the interface characteristics of the generating system. A MOD-O wind turbine was connected to a very strong system; thus, the voltage distortion was low and the total harmonic distortion in the utility voltage was less than 3% (within the 5% limit required by most utilities). The largest voltage component of a frequency below 60 Hz was 40 dB down from the 60-Hz< component. 8 refs., 14 figs., 8 tabs.« less

Final Technical Report for Contract No. DE-EE0006332, "Integrated Simulation Development and Decision Support Tool-Set for Utility Market and Distributed Solar Power Generation"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cormier, Dallas; Edra, Sherwin; Espinoza, Michael

This project will enable utilities to develop long-term strategic plans that integrate high levels of renewable energy generation, and to better plan power system operations under high renewable penetration. The program developed forecast data streams for decision support and effective integration of centralized and distributed solar power generation in utility operations. This toolset focused on real time simulation of distributed power generation within utility grids with the emphasis on potential applications in day ahead (market) and real time (reliability) utility operations. The project team developed and demonstrated methodologies for quantifying the impact of distributed solar generation on core utility operations,more » identified protocols for internal data communication requirements, and worked with utility personnel to adapt the new distributed generation (DG) forecasts seamlessly within existing Load and Generation procedures through a sophisticated DMS. This project supported the objectives of the SunShot Initiative and SUNRISE by enabling core utility operations to enhance their simulation capability to analyze and prepare for the impacts of high penetrations of solar on the power grid. The impact of high penetration solar PV on utility operations is not only limited to control centers, but across many core operations. Benefits of an enhanced DMS using state-of-the-art solar forecast data were demonstrated within this project and have had an immediate direct operational cost savings for Energy Marketing for Day Ahead generation commitments, Real Time Operations, Load Forecasting (at an aggregate system level for Day Ahead), Demand Response, Long term Planning (asset management), Distribution Operations, and core ancillary services as required for balancing and reliability. This provided power system operators with the necessary tools and processes to operate the grid in a reliable manner under high renewable penetration.« less

Correlates of, and barriers to, Internet use among older adults.

PubMed

Chang, Janet; McAllister, Carolyn; McCaslin, Rosemary

2015-01-01

Older adults constitute the group with the greatest increase in Internet usage in the past decade; however, usage varies greatly within this population. Services to older adults require a current understanding of Internet-use trends. This study utilized a quantitative survey method to examine correlates of, and barriers to, current Internet use in a demographically diverse county in Southern California. Findings indicate that the presence of a computer at home, a job requiring computer use, age, education, and ethnicity are important factors in predicting Internet use in older adults. Implications for social work practice with older adults is discussed.

[Design and experiment of micro biochemical detector based on micro spectrometer].

PubMed

Yu, Qing-hua; Wen, Zhi-yu; Chen, Gang; Dai, Wei-wei; Liu, Nian-ci; Wu, Xin

2012-03-01

According to the requirements of rapid detection of important life parameters for the sick and wounded, a new micro bio-chemical detection configuration was proposed utilizing continuous spectroscopy analysis, which was founded on MOEMS and embedded technology. The configuration was developed as so much research work was carried out on the detecting objects and methods. Important parameters such as stray light, absorbance linearity, absorbance ratability, stability and temperature accuracy of the instrument were tested, which are all in good agreement with the design requirements. Clinic tests show that it can detect multiple life parameters quickly (Na+, GLU, Hb eg.).

Simultaneous Visualization of Different Utility Networks for Disaster Management

NASA Astrophysics Data System (ADS)

Semm, S.; Becker, T.; Kolbe, T. H.

2012-07-01

Cartographic visualizations of crises are used to create a Common Operational Picture (COP) and enforce Situational Awareness by presenting and representing relevant information. As nearly all crises affect geospatial entities, geo-data representations have to support location-specific decision-making throughout the crises. Since, Operator's attention span and their working memory are limiting factors for the process of getting and interpreting information; the cartographic presentation has to support individuals in coordinating their activities and with handling highly dynamic situations. The Situational Awareness of operators in conjunction with a COP are key aspects of the decision making process and essential for coming to appropriate decisions. Utility networks are one of the most complex and most needed systems within a city. The visualization of utility infrastructure in crisis situations is addressed in this paper. The paper will provide a conceptual approach on how to simplify, aggregate, and visualize multiple utility networks and their components to meet the requirements of the decision-making process and to support Situational Awareness.

Design of conveyor utilization monitoring system: a case study of powder coating line in sheet metal fabrication

NASA Astrophysics Data System (ADS)

Prasetyo, Hoedi; Sugiarto, Yohanes; Nur Rosyidi, Cucuk

2018-03-01

Conveyor is a very useful equipment to replace manpower in transporting the goods. It highly influences the productivity, production capacity utilization and eventually the production cost. This paper proposes a system to monitor the utilization of conveyor at a low cost through a case study at powder coating process line in a sheet metal fabrication. Preliminary observation was conducted to identify the problems. The monitoring system was then built and executed. The system consists of two sub systems. First is sub system for collecting and transmitting the required data and the second is sub system for displaying the data. The system utilizes sensors, wireless data transfer and windows-based application. The test results showed that the whole system works properly. By this system, the productivity and status of the conveyor can be monitored in real time. This research enriches the development of conveyor monitoring system especially for implementation in small and medium enterprises.

The Meaning and Measurement of Work Fatigue: Development and Evaluation of the Three-Dimensional Work Fatigue Inventory (3D-WFI)

PubMed Central

Frone, Michael R.; Tidwell, Marie-Cecile O.

2015-01-01

Although work fatigue represents an important construct in several substantive areas, prior conceptual definitions and measures have been inadequate in a number of ways. The goals of the present study were to develop a conceptual definition and outline the desirable characteristics of a work fatigue measure; briefly examine several prior measures of work fatigue-related constructs; and develop and evaluate a new measure of work fatigue. The Three-Dimensional Work Fatigue Inventory (3D-WFI) provides separate and commensurate assessments of physical, mental, and emotional work fatigue. Results from a pilot study (N = 207) and a broader evaluative study of U.S. wage and salary workers (N = 2,477) suggest that the 3D-WFI is psychometrically sound and evinces a meaningful pattern of relations with variables that comprise the nomological network of work fatigue. As with all new measures, additional research is required to evaluate fully the utility of the 3D-WFI in research on work fatigue. PMID:25602275

Work and Inertial Frames

NASA Astrophysics Data System (ADS)

Kaufman, Richard

2017-12-01

A fairly recent paper resolves a large discrepancy in the internal energy utilized to fire a cannon as calculated by two inertial observers. Earth and its small reaction velocity must be considered in the system so that the change in kinetic energy is calculated correctly. This paper uses a car in a similar scenario, but considers the work done by forces acting over distances. An analysis of the system must include all energy interactions, including the work done on the car and especially the (negative) work done on Earth in a moving reference frame. This shows the importance of considering the force on Earth and the distance Earth travels. For calculation of work in inertial reference frames, the center of mass perspective is shown to be useful. We also consider the energy requirements to efficiently accelerate a mass among interacting masses.

Effect of Component Failures on Economics of Distributed Photovoltaic Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lubin, Barry T.

2012-02-02

This report describes an applied research program to assess the realistic costs of grid connected photovoltaic (PV) installations. A Board of Advisors was assembled that included management from the regional electric power utilities, as well as other participants from companies that work in the electric power industry. Although the program started with the intention of addressing effective load carrying capacity (ELCC) for utility-owned photovoltaic installations, results from the literature study and recommendations from the Board of Advisors led investigators to the conclusion that obtaining effective data for this analysis would be difficult, if not impossible. The effort was then re-focusedmore » on assessing the realistic costs and economic valuations of grid-connected PV installations. The 17 kW PV installation on the University of Hartford's Lincoln Theater was used as one source of actual data. The change in objective required a more technically oriented group. The re-organized working group (changes made due to the need for more technically oriented participants) made site visits to medium-sized PV installations in Connecticut with the objective of developing sources of operating histories. An extensive literature review helped to focus efforts in several technical and economic subjects. The objective of determining the consequences of component failures on both generation and economic returns required three analyses. The first was a Monte-Carlo-based simulation model for failure occurrences and the resulting downtime. Published failure data, though limited, was used to verify the results. A second model was developed to predict the reduction in or loss of electrical generation related to the downtime due to these failures. Finally, a comprehensive economic analysis, including these failures, was developed to determine realistic net present values of installed PV arrays. Two types of societal benefits were explored, with quantitative valuations developed for both. Some societal benefits associated with financial benefits to the utility of having a distributed generation capacity that is not fossil-fuel based have been included into the economic models. Also included and quantified in the models are several benefits to society more generally: job creation and some estimates of benefits from avoiding greenhouse emissions. PV system failures result in a lowering of the economic values of a grid-connected system, but this turned out to be a surprisingly small effect on the overall economics. The most significant benefit noted resulted from including the societal benefits accrued to the utility. This provided a marked increase in the valuations of the array and made the overall value proposition a financially attractive one, in that net present values exceeded installation costs. These results indicate that the Department of Energy and state regulatory bodies should consider focusing on societal benefits that create economic value for the utility, confirm these quantitative values, and work to have them accepted by the utilities and reflected in the rate structures for power obtained from grid-connected arrays. Understanding and applying the economic benefits evident in this work can significantly improve the business case for grid-connected PV installations. This work also indicates that the societal benefits to the population are real and defensible, but not nearly as easy to justify in a business case as are the benefits that accrue directly to the utility.« less

Vibration of a Singly-curved Thin Shell Reflector with a Unidirectional Tension Field

NASA Technical Reports Server (NTRS)

Williams, R. Brett; Klein, Kerry J.; Agnes, Gregory S.

2006-01-01

Increased science requirements for space-based instruments over the past few decades have lead to the increased popularity of deployable space structures constructed from thin, lightweight films. Such structures offer both low mass and the ability to be stowed inside conventional launch vehicles. The analysis in this work pertains to large, singly-curved lightweight deployable reflectors commonly used in radar antennas and space telescopes. These types of systems, which can vary a great deal in size, often have frequency requirement that must be met. This work discusses two missions that utilize this type of aperture technology, and then develops a Rayleigh-Ritz model that predicts the natural frequencies and mode shapes for a (nearly) flat and singly-curved reflector with unidirectional in-plane loading. The results are compared with NASTRAN analyses.

Definition of spacecraft standard interfaces by the NASA Space Assembly and Servicing Working Group (SASWG)

NASA Technical Reports Server (NTRS)

Radtke, Robert; Woolley, Charles; Arnold, Lana

1993-01-01

The purpose of the NASA Space Assembly and Servicing Working Group (SASWG) is to study enabling technologies for on-orbit spacecraft maintenance and servicing. One key technology required for effective space logistics activity is the development of standard spacecraft interfaces, including the 'Basic Set' defined by NASA, the U.S. Space Command, and industry panelists to be the following: (1) navigation aids; (2) grasping, berthing, and docking; and (3) utility connections for power, data, and fluids. Draft standards have been prepared and referred to professional standards organizations, including the AIAA, EIA, and SAE space standards committee. The objective of the SASWG is to support these committees with the technical expertise required to prepare standards, guidelines, and recommended practices which will be accepted by the ANSI and international standards organizations, including the ISO, IEC, and PASC.

ACCELERATING MR PARAMETER MAPPING USING SPARSITY-PROMOTING REGULARIZATION IN PARAMETRIC DIMENSION

PubMed Central

Velikina, Julia V.; Alexander, Andrew L.; Samsonov, Alexey

2013-01-01

MR parameter mapping requires sampling along additional (parametric) dimension, which often limits its clinical appeal due to a several-fold increase in scan times compared to conventional anatomic imaging. Data undersampling combined with parallel imaging is an attractive way to reduce scan time in such applications. However, inherent SNR penalties of parallel MRI due to noise amplification often limit its utility even at moderate acceleration factors, requiring regularization by prior knowledge. In this work, we propose a novel regularization strategy, which utilizes smoothness of signal evolution in the parametric dimension within compressed sensing framework (p-CS) to provide accurate and precise estimation of parametric maps from undersampled data. The performance of the method was demonstrated with variable flip angle T1 mapping and compared favorably to two representative reconstruction approaches, image space-based total variation regularization and an analytical model-based reconstruction. The proposed p-CS regularization was found to provide efficient suppression of noise amplification and preservation of parameter mapping accuracy without explicit utilization of analytical signal models. The developed method may facilitate acceleration of quantitative MRI techniques that are not suitable to model-based reconstruction because of complex signal models or when signal deviations from the expected analytical model exist. PMID:23213053

Evaluation of Visual Analytics Environments: The Road to the Visual Analytics Science and Technology Challenge Evaluation Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholtz, Jean; Plaisant, Catherine; Whiting, Mark A.

The evaluation of visual analytics environments was a topic in Illuminating the Path [Thomas 2005] as a critical aspect of moving research into practice. For a thorough understanding of the utility of the systems available, evaluation not only involves assessing the visualizations, interactions or data processing algorithms themselves, but also the complex processes that a tool is meant to support (such as exploratory data analysis and reasoning, communication through visualization, or collaborative data analysis [Lam 2012; Carpendale 2007]). Researchers and practitioners in the field have long identified many of the challenges faced when planning, conducting, and executing an evaluation ofmore » a visualization tool or system [Plaisant 2004]. Evaluation is needed to verify that algorithms and software systems work correctly and that they represent improvements over the current infrastructure. Additionally to effectively transfer new software into a working environment, it is necessary to ensure that the software has utility for the end-users and that the software can be incorporated into the end-user’s infrastructure and work practices. Evaluation test beds require datasets, tasks, metrics and evaluation methodologies. As noted in [Thomas 2005] it is difficult and expensive for any one researcher to setup an evaluation test bed so in many cases evaluation is setup for communities of researchers or for various research projects or programs. Examples of successful community evaluations can be found [Chinchor 1993; Voorhees 2007; FRGC 2012]. As visual analytics environments are intended to facilitate the work of human analysts, one aspect of evaluation needs to focus on the utility of the software to the end-user. This requires representative users, representative tasks, and metrics that measure the utility to the end-user. This is even more difficult as now one aspect of the test methodology is access to representative end-users to participate in the evaluation. In many cases the sensitive nature of data and tasks and difficult access to busy analysts puts even more of a burden on researchers to complete this type of evaluation. User-centered design goes beyond evaluation and starts with the user [Beyer 1997, Shneiderman 2009]. Having some knowledge of the type of data, tasks, and work practices helps researchers and developers know the correct paths to pursue in their work. When access to the end-users is problematic at best and impossible at worst, user-centered design becomes difficult. Researchers are unlikely to go to work on the type of problems faced by inaccessible users. Commercial vendors have difficulties evaluating and improving their products when they cannot observe real users working with their products. In well-established fields such as web site design or office software design, user-interface guidelines have been developed based on the results of empirical studies or the experience of experts. Guidelines can speed up the design process and replace some of the need for observation of actual users [heuristics review references]. In 2006 when the visual analytics community was initially getting organized, no such guidelines existed. Therefore, we were faced with the problem of developing an evaluation framework for the field of visual analytics that would provide representative situations and datasets, representative tasks and utility metrics, and finally a test methodology which would include a surrogate for representative users, increase interest in conducting research in the field, and provide sufficient feedback to the researchers so that they could improve their systems.« less

Work-Load Planning for Navy Stock Points

DTIC Science & Technology

1990-12-01

capacity. 2. The level of utilization of a non -bottleneck is not determined by its own potential, but by some other constraint in the system. 3...the amounts to carry based on customer demands and non -demand based requirements II. Basic Operations A. Determines which items to carry in inventory...storage, physical inventory, issue, transportation, and 8 control of material. The focus was to be primarily on the relationships among functions in

Cradle Enhanced UI Development

NASA Technical Reports Server (NTRS)

Jentsch, Samuel

2016-01-01

This summer I have been working in the EDI (Exploration, Development, and Integration) office. The primary goal of my office is to facilitate the integration, cooperation, and communication between programs, projects and departments throughout the agency. The majority of my efforts has been focused on Cradle, a requirements management and systems engineering tool. This tool is utilized by teams throughout NASA to plan and track the development of a variety of ongoing projects.

Gas Conversion Systems Reclaim Fuel for Industry

NASA Technical Reports Server (NTRS)

2015-01-01

A human trip to Mars will require astronauts to utilize resources on the Red Planet to generate oxygen and fuel for the ride home, among other things. Lakewood, Colorado-based Pioneer Energy has worked under SBIR agreements with Johnson Space Center to develop technology for those purposes, and now uses a commercialized version of the technology to recover oil and gas that would otherwise be wasted at drilling sites.

Assessing the Utility of Work Team Theory in a Unified Command Environment at Catastrophic Incidents

DTIC Science & Technology

2005-03-01

between agencies that potentially affects command post (CP) interactions . All of the foregoing factors contribute to a turbulent management environment...requiring special strategy consideration with and IMT preparation. “Conflict refers to a process of social interaction involving a struggle over...from interactions . These schemas can be grouped as cultural norms perpetuated generationally from seasoned officers to raw recruits, and shared by

The Library and the Economic Community; A Market Analysis of Information Needs of Business and Industry in the Communities of Pasadena and Pomona, California.

ERIC Educational Resources Information Center

Meyer, Robert S.; Rostvold, Gerhard N.

This study represents a market analysis of the needs, habits and desires of business firms concerning their acquisition and utilization of the information required in their work in order to improve public library services to business and industry through cooperative library action. The key recommendations were: the public library should be the…

U.S. Economic Debt Crisis Solutions: Adjusting Army Manpower

DTIC Science & Technology

2012-02-27

leaders must lower the reliance on Army manpower in responding to global issues while working to refocus the diplomatic, informational and economic...as many former Presidents, saw the utility and correspondingly endorsed the need to lead with diplomatic efforts in confronting global issues and 19...national power are often seen as a balancing act in addressing global issues , any reduction or addition to one element requires consideration of a

Analyses in support of risk-informed natural gas vehicle maintenance facility codes and standards :

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ekoto, Isaac W.; Blaylock, Myra L.; LaFleur, Angela Christine

2014-03-01

Safety standards development for maintenance facilities of liquid and compressed gas fueled large-scale vehicles is required to ensure proper facility design and operation envelopes. Standard development organizations are utilizing risk-informed concepts to develop natural gas vehicle (NGV) codes and standards so that maintenance facilities meet acceptable risk levels. The present report summarizes Phase I work for existing NGV repair facility code requirements and highlights inconsistencies that need quantitative analysis into their effectiveness. A Hazardous and Operability study was performed to identify key scenarios of interest. Finally, scenario analyses were performed using detailed simulations and modeling to estimate the overpressure hazardsmore » from HAZOP defined scenarios. The results from Phase I will be used to identify significant risk contributors at NGV maintenance facilities, and are expected to form the basis for follow-on quantitative risk analysis work to address specific code requirements and identify effective accident prevention and mitigation strategies.« less

Crew Exploration Vehicle Environmental Control and Life Support Fire Protection Approach

NASA Technical Reports Server (NTRS)

Lewis, John F.; Barido, Richard; Tuan, George C.

2007-01-01

As part of preparing for the Crew Exploration Vehicle (CEV), the National Aeronautics and Space Administration (NASA) worked on developing the requirements to manage the fire risk. The new CEV poses unique challenges to current fire protection systems. The size and configuration of the vehicle resembles the Apollo capsule instead of the current Space Shuttle or the International Space Station. The smaller free air volume and fully cold plated avionic bays of the CEV requires a different approach in fire protection than the ones currently utilized. The fire protection approach discussed in this paper incorporates historical lessons learned and fire detection and suppression system design philosophy spanning from Apollo to the International Space Station. Working with NASA fire and materials experts, this approach outlines the best requirements for both the closed out area of the vehicle, such as the avionics bay, and the crew cabin area to address the unique challenges due to the size and configuration of the CEV.

Hyperspectral microscope for in vivo imaging of microstructures and cells in tissues

DOEpatents

Demos,; Stavros, G [Livermore, CA

2011-05-17

An optical hyperspectral/multimodal imaging method and apparatus is utilized to provide high signal sensitivity for implementation of various optical imaging approaches. Such a system utilizes long working distance microscope objectives so as to enable off-axis illumination of predetermined tissue thereby allowing for excitation at any optical wavelength, simplifies design, reduces required optical elements, significantly reduces spectral noise from the optical elements and allows for fast image acquisition enabling high quality imaging in-vivo. Such a technology provides a means of detecting disease at the single cell level such as cancer, precancer, ischemic, traumatic or other type of injury, infection, or other diseases or conditions causing alterations in cells and tissue micro structures.

Study of dispersed small wind systems interconnected with a utility distribution system

NASA Astrophysics Data System (ADS)

Curtice, D.; Patton, J.; Bohn, J.; Sechan, N.

1980-03-01

Operating problems for various penetrations of small wind systems connected to the distribution system on a utility are defined. Protection equipment, safety hazards, feeder voltage regulation, line losses, and voltage flicker problems are studied, assuming different small wind systems connected to an existing distribution system. To identify hardware deficiencies, possible solutions provided by off-the-shelf hardware and equipment are assessed. Results of the study indicate that existing techniques are inadequate for detecting isolated operation of a small wind system. Potential safety hazards posed by small wind systems are adequately handled by present work procedures although these procedures require a disconnect device at synchronous generator and self commutated inverter small wind systems.

75 FR 1380 - National Drinking Water Advisory Council's Climate Ready Water Utilities Working Group Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-11

... Ready Water Utilities Working Group Meeting Announcement AGENCY: Environmental Protection Agency. ACTION... meeting of the Climate Ready Water Utilities (CRWU) Working Group of the National Drinking Water Advisory Council (NDWAC). The purpose of this meeting is for the Working Group to discuss the attributes and...

75 FR 20352 - National Drinking Water Advisory Council's Climate Ready Water Utilities Working Group Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-19

... Ready Water Utilities Working Group Meeting Announcement AGENCY: Environmental Protection Agency. ACTION...-person meeting of the Climate Ready Water Utilities (CRWU) Working Group of the National Drinking Water Advisory Council (NDWAC). The purpose of this meeting is for the Working Group to discuss key findings, the...

42 CFR 456.201 - UR plan required for inpatient mental hospital services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false UR plan required for inpatient mental hospital... HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Utilization Control: Mental Hospitals Utilization Review (ur) Plan: General Requirements § 456.201 UR plan required for...

42 CFR 488.64 - Remote facility variances for utilization review requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 5 2014-10-01 2014-10-01 false Remote facility variances for utilization review requirements. 488.64 Section 488.64 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... PROCEDURES Special Requirements § 488.64 Remote facility variances for utilization review requirements. (a...

42 CFR 488.64 - Remote facility variances for utilization review requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 5 2012-10-01 2012-10-01 false Remote facility variances for utilization review requirements. 488.64 Section 488.64 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... PROCEDURES Special Requirements § 488.64 Remote facility variances for utilization review requirements. (a...

42 CFR 488.64 - Remote facility variances for utilization review requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Remote facility variances for utilization review requirements. 488.64 Section 488.64 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... PROCEDURES Special Requirements § 488.64 Remote facility variances for utilization review requirements. (a...

42 CFR 488.64 - Remote facility variances for utilization review requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 5 2013-10-01 2013-10-01 false Remote facility variances for utilization review requirements. 488.64 Section 488.64 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF... PROCEDURES Special Requirements § 488.64 Remote facility variances for utilization review requirements. (a...

Pilot Project Technology Business Case: Mobile Work Packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Ken; Lawrie, Sean; Niedermuller, Josef

Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such thatmore » it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) was developed in September of 2015 to frame the benefit side of II&C technologies to address the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the “benefits” side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology. The methodology is presented in the context of the entire process, but the tool provided is limited to determining the organizational benefits only. This report describes a the use of the BCM in building a business case for mobile work packages, which includes computer-based procedures and other automated elements of a work package. Key to those impacts will be identifying where the savings are “harvestable,” meaning they result in an actual reduction in headcount and/or cost. The report describes the specific activities conducted with a partner utility to examine the various work activities associated with mobile work packages to determine what time savings and error rate reductions are available. The report summarizes these findings in the form of a business case for the technology.« less

Kinematic control model for light weighting mechanism of excavator attached to rotary working device

NASA Astrophysics Data System (ADS)

Lee, Choongho; Lee, Sangsik; Cho, Youngtae; Im, Kwanghee

2007-07-01

An excavator attached to a rotary working device is used principally in industrial work. In particular, they are used in the building industry and public works. This research concerns the rotary automatic control of an excavator attached to a rotary working device. The drilling excavator is used in the crushed stone industry and the dragline excavation system is employed in the construction industry. Cases of the excavator's use in agriculture have been the subject of a relatively few studies. However, several modified excavator designs have been released in recent years. Applied excavator products are primarily utilized under relatively severe environmental conditions. In this study, we focus on the uses of an excavator in agricultural work. The readjustment of arable land and the reduction of weeds in agricultural applications both require skilled hand-operation of the machines. As such workers have been shown to develop problems with regard to working posture and proper positioning while laboring, a more appropriate excavator design may prove useful in such applications. Therefore, this pilot study is focused primarily on the rotary automatic control of an excavator attached to a rotary working device, and will adapt smart materials to the excavator applications for developing redesigned excavator having a light weight. The excavator is attached to a rotary working device on a normal excavator's platform, and the position and orientation of the mechanism between the joints and the rotary working device was determined. Simulations were also conducted of the excavator attached to the rotary working device. With an eye toward the use of this mechanism in agricultural work, we also conducted a set of kinematic analyses. The rotary working device was assumed to have 3 DOF, and was comprised of 5 links. Computer simulations were also conducted using the developed excavator model. In order to adequately evaluate the possible performance of such a system, kinetic analysis, simulation with a soil model, FEM analysis with structural strength analysis, and changes to the smart materials with high rigidity will be required in the future. In addition, experiment and analysis of a prototype, durability experiments, and analyses utilizing S-N curves will be necessary, as well further research into the overall reliability of such a product.

A project-based geoscience curriculum: select examples

NASA Astrophysics Data System (ADS)

Brown, L. M.; Kelso, P. R.; White, R. J.; Rexroad, C. B.

2007-12-01

Principles of constructivist educational philosophy serve as a foundation for the recently completed National Science Foundation sponsored undergraduate curricular revision undertaken by the Geology Department of Lake Superior State University. We integrate lecture and laboratory sessions utilizing active learning strategies that focus on real-world geoscience experiences and problems. In this presentation, we discuss details of three research-like projects that require students to access original data, process and model the data using appropriate geological software, interpret and defend results, and disseminate results in reports, posters, and class presentations. The projects are from three upper division courses, Carbonate Systems, Sequence Stratigraphy, and Geophysical Systems, where teams of two to four students are presented with defined problems of durations ranging from a few weeks to an entire semester. Project goals and location, some background information, and specified dates and expectations for interim and final written and oral reports are provided to students. Some projects require the entire class to work on one data set, some require each team to be initially responsible for a portion of the project with teams ultimately merging data for interpretation and to arrive at final conclusions. Some projects require students to utilize data from appropriate geological web sites such as state geological surveys. Others require students to design surveys and utilize appropriate instruments of their choice for field data collection. Students learn usage and applications of appropriate geological software in compiling, processing, modeling, and interpreting data and preparing formal reports and presentations. Students uniformly report heightened interest and motivation when engaged in these projects. Our new curriculum has resulted in an increase in students" quantitative and interpretive skills along with dramatic improvement in communication and interpersonal skills related to group dynamics.

Variation of fee-for-service specialist direct care work effort with patient overall illness burden.

PubMed

Goodman, Robert

2011-08-01

To explore whether a common industry measure of overall patient illness burden, used to assess the total costs of members in a health plan, would be suitable to describe variation in a summary metric of utilization that assesses specialist physician direct patient care services not grouped into clinical episodes, but with exclusion criteria applied to reduce any bias in the data. Data sources/study setting Calendar year 2006 administrative data on 153,557 commercial members enrolled in a non-profit single-state statewide Health Maintenance Organization (HMO) and treated by 4356 specialists in 11 specialties. The health plan's global referral process and specialist fee-for-service reimbursement likely makes these results applicable to the non-managed care setting, as once a global referral was authorized there was no required intervention by the HMO or referring primary care provider for the majority of any subsequent specialist direct clinical care. Study design Specialty-specific correlations and ordinary least-squares regression models to assess variations in specialist direct patient care work effort with patient overall illness burden, after the application of exclusion criteria to reduce potential bias in the data. Principle findings Statistically significant positive correlations exist between specialist direct patient care work effort and patient overall illness burden for all studied specialties. Regression models revealed a generally monotonic increasing relationship between illness burden categories and aggregate specialist direct patient care work effort. Almost all regression model differences from the reference category across specialties are statistically significant (P ≤ 0.012). Assessment of additional results demonstrates the relationship has more substantive significance in some specialties and less in others. The most substantive relationships in this study were found in the specialties of orthopaedic surgery, general surgery and interventional cardiology. For many specialties, specialists do vary physician direct patient care utilization with patient overall illness burden. Accounting for patient overall health status is important to fairly compare specialists of certain specialties on utilization for health plan specialist network management. Additional study is required to evaluate health plan application of this methodology.

Health status, activity limitations, and disability in work and housework among Latinos and non-Latinos with arthritis: an analysis of national data.

PubMed

Abraído-Lanza, Ana F; White, Kellee; Armbrister, Adria N; Link, Bruce G

2006-06-15

To document disparities in health status, activity limitations, and disability in work and housework between Latinos and non-Latino whites with arthritis. We examined whether sociodemographic factors (age, income, and education) account for the disparities between the ethnic groups, and whether comorbid conditions, disease duration, health care utilization, and functional abilities predict health status, activity limitations, and work and housework disability after controlling for sociodemographic variables. We analyzed data from the Condition file of the 1994 National Health Interview Survey on Disability, Phase I. The risk of worse health, activity limitations, and work and housework disability was >2 times greater among Latinos compared with non-Latino whites. In the regression models accounting for potential confounders, Latino ethnicity remained significantly associated with poorer health status, but not activity limitations or disability in work or housekeeping. Of the socioeconomic status variables, education had a significant protective effect on work disability and health status. Comorbid conditions and health care utilization increased the likelihood of worse health, activity limitations, and work disability. Limitations in physical function were associated with poorer health and disability in work and homemaking. Social status differences between Latinos and non-Latinos may account for disparities in activity limitations and disability in work and housework. Education may provide various health benefits, including access to a range of occupations that do not require physical demands. The findings help to address the great gap in knowledge concerning factors related to the health and disability status of Latinos with arthritis.

Team-building activities as strategies for improving community-university partnerships: lessons learned from Nuestro Futuro Saludable.

PubMed

Ndulue, Uchenna; Peréa, Flavia C; Kayou, Bashier; Martinez, Linda Sprague

2012-01-01

Collaboration characterized by mutual capacity building, asset sharing, and tangible outcomes that work to further health equity are central tenets of community-based participatory (CBPR) approaches to research. Such efforts require the establishment, development, and maintenance of trusting relationships between community and institutional stakeholders. The objective of the strategies discussed here was to strengthen a community-academic partnership by facilitating communication and empowering project partners. Team-building activities and experiential exercises were intentionally utilized with project stakeholders to clarify roles and responsibilities, provide alternative avenues for authentic communication, and share power. Team-building activities can be effective in promoting CBPR partnerships when utilized appropriately. Through the course of the partnership building process, best practices emerged for utilizing experiential learning exercises to enhance partnership dynamics. Team-building activities provide a useful tool for developing supportive environments that encourage open dialogue.

Graphics Processing Unit Assisted Thermographic Compositing

NASA Technical Reports Server (NTRS)

Ragasa, Scott; McDougal, Matthew; Russell, Sam

2012-01-01

Objective: To develop a software application utilizing general purpose graphics processing units (GPUs) for the analysis of large sets of thermographic data. Background: Over the past few years, an increasing effort among scientists and engineers to utilize the GPU in a more general purpose fashion is allowing for supercomputer level results at individual workstations. As data sets grow, the methods to work them grow at an equal, and often great, pace. Certain common computations can take advantage of the massively parallel and optimized hardware constructs of the GPU to allow for throughput that was previously reserved for compute clusters. These common computations have high degrees of data parallelism, that is, they are the same computation applied to a large set of data where the result does not depend on other data elements. Signal (image) processing is one area were GPUs are being used to greatly increase the performance of certain algorithms and analysis techniques. Technical Methodology/Approach: Apply massively parallel algorithms and data structures to the specific analysis requirements presented when working with thermographic data sets.

Grid accounting service: state and future development

NASA Astrophysics Data System (ADS)

Levshina, T.; Sehgal, C.; Bockelman, B.; Weitzel, D.; Guru, A.

2014-06-01

During the last decade, large-scale federated distributed infrastructures have been continually developed and expanded. One of the crucial components of a cyber-infrastructure is an accounting service that collects data related to resource utilization and identity of users using resources. The accounting service is important for verifying pledged resource allocation per particular groups and users, providing reports for funding agencies and resource providers, and understanding hardware provisioning requirements. It can also be used for end-to-end troubleshooting as well as billing purposes. In this work we describe Gratia, a federated accounting service jointly developed at Fermilab and Holland Computing Center at University of Nebraska-Lincoln. The Open Science Grid, Fermilab, HCC, and several other institutions have used Gratia in production for several years. The current development activities include expanding Virtual Machines provisioning information, XSEDE allocation usage accounting, and Campus Grids resource utilization. We also identify the direction of future work: improvement and expansion of Cloud accounting, persistent and elastic storage space allocation, and the incorporation of WAN and LAN network metrics.

Efficient utilization of graphics technology for space animation

NASA Technical Reports Server (NTRS)

Panos, Gregory Peter

1989-01-01

Efficient utilization of computer graphics technology has become a major investment in the work of aerospace engineers and mission designers. These new tools are having a significant impact in the development and analysis of complex tasks and procedures which must be prepared prior to actual space flight. Design and implementation of useful methods in applying these tools has evolved into a complex interaction of hardware, software, network, video and various user interfaces. Because few people can understand every aspect of this broad mix of technology, many specialists are required to build, train, maintain and adapt these tools to changing user needs. Researchers have set out to create systems where an engineering designer can easily work to achieve goals with a minimum of technological distraction. This was accomplished with high-performance flight simulation visual systems and supercomputer computational horsepower. Control throughout the creative process is judiciously applied while maintaining generality and ease of use to accommodate a wide variety of engineering needs.

Clinical utility of BOLD fMRI in preoperative work-up of epilepsy

PubMed Central

Ganesan, Karthik; Ursekar, Meher

2014-01-01

Surgical techniques have emerged as a viable therapeutic option in patients with drug refractory epilepsy. Pre-surgical evaluation of epilepsy requires a comprehensive, multiparametric, and multimodal approach for precise localization of the epileptogenic focus. Various non-invasive techniques are available at the disposal of the treating physician to detect the epileptogenic focus, which include electroencephalography (EEG), video-EEG, magnetic resonance imaging (MRI), functional MRI including blood oxygen level dependent (BOLD) techniques, single photon emission tomography (SPECT), and 18F-fluorodeoxyglucose (FDG) positron emission tomography (PET). Currently, non-invasive high-resolution MR imaging techniques play pivotal roles in the preoperative detection of the seizure focus, and represent the foundation for successful epilepsy surgery. BOLD functional magnetic resonance imaging (fMRI) maps allow for precise localization of the eloquent cortex in relation to the seizure focus. This review article focuses on the clinical utility of BOLD (fMRI) in the pre-surgical work-up of epilepsy patients. PMID:24851002

Prediction of heart disease using apache spark analysing decision trees and gradient boosting algorithm

NASA Astrophysics Data System (ADS)

Chugh, Saryu; Arivu Selvan, K.; Nadesh, RK

2017-11-01

Numerous destructive things influence the working arrangement of human body as hypertension, smoking, obesity, inappropriate medication taking which causes many contrasting diseases as diabetes, thyroid, strokes and coronary diseases. The impermanence and horribleness of the environment situation is also the reason for the coronary disease. The structure of Apache start relies on the evolution which requires gathering of the data. To break down the significance of use programming focused on data structure the Apache stop ought to be utilized and it gives various central focuses as it is fast in light as it uses memory worked in preparing. Apache Spark continues running on dispersed environment and chops down the data in bunches giving a high profitability rate. Utilizing mining procedure as a part of the determination of coronary disease has been exhaustively examined indicating worthy levels of precision. Decision trees, Neural Network, Gradient Boosting Algorithm are the various apache spark proficiencies which help in collecting the information.

Reducing the complexity of the CCSDS standard for image compression decreasing the DWT filter order

NASA Astrophysics Data System (ADS)

Ito, Leandro H.; Pinho, Marcelo S.

2014-10-01

The goal for this work is to evaluate the impact of utilizing shorter wavelet filters in the CCSDS standard for lossy and lossless image compression. Another constraint considered was the existence of symmetry in the filters. That approach was desired to maintain the symmetric extension compatibility of the filter banks. Even though this strategy works well for oat wavelets, it is not always the case for their integer approximations. The periodic extension was utilized whenever symmetric extension was not applicable. Even though the latter outperforms the former, for fair comparison the symmetric extension compatible integer-to-integer wavelet approximations were evaluated under both extensions. The evaluation methods adopted were bit rate (bpp), PSNR and the number of operations required by each wavelet transforms. All these results were compared against the ones obtained utilizing the standard CCSDS with 9/7 filter banks, for lossy and lossless compression. The tests were performed over tallies (512x512) of raw remote sensing images from CBERS-2B (China-Brazil Earth Resources Satellites) captured from its high resolution CCD camera. These images were cordially made available by INPE (National Institute for Space Research) in Brazil. For the CCSDS implementation, it was utilized the source code developed by Hongqiang Wang from the Electrical Department at Nebraska-Lincoln University, applying the appropriate changes on the wavelet transform. For lossy compression, the results have shown that the filter bank built from the Deslauriers-Dubuc scaling function, with respectively 2 and 4 vanishing moments on the synthesis and analysis banks, presented not only a reduction of 21% in the number of operations required, but also a performance on par with the 9/7 filter bank. In the lossless case, the biorthogonal Cohen-Daubechies-Feauveau with 2 vanishing moments presented a performance close to the 9/7 integer approximation of the CCSDS, with the number of operations reduced by 1/3.

Patterns of hospital resource utilization of children with leukemia and CNS tumors: a comparison of children who survive and those who die within 3 years of diagnosis.

PubMed

Hendrickson, Karrie Cummings; Rimar, Joan

2009-01-01

Hospital admissions for children with cancer tend to be longer than admissions for adults with cancer and longer, more frequent, and more costly than other pediatric admissions. The two childhood cancers most commonly requiring hospitalization are leukemia and tumors of the central nervous system (CNS tumors). Determining the best use of limited financial resources and preparing children and their parents for what to expect requires a better understanding of the patterns and cost of hospital resource utilization by children with cancer. Both hospital administrators and third-party payers can use this understanding to better allocate resources and plan the care of children with cancer in the future. Because many parents of children with cancer struggle financially due to the high cost of treatments, time off of work, and other non-medical expenses, more education in this area may help parents to prepare, thus alleviating some of the uncertainty and unexpected financial costs associated with childhood cancer.

Machine Learning Based Classifier for Falsehood Detection

NASA Astrophysics Data System (ADS)

Mallikarjun, H. M.; Manimegalai, P., Dr.; Suresh, H. N., Dr.

2017-08-01

The investigation of physiological techniques for Falsehood identification tests utilizing the enthusiastic aggravations started as a part of mid 1900s. The need of Falsehood recognition has been a piece of our general public from hundreds of years back. Different requirements drifted over the general public raising the need to create trick evidence philosophies for Falsehood identification. The established similar addressing tests have been having a tendency to gather uncertain results against which new hearty strategies are being explored upon for acquiring more productive Falsehood discovery set up. Electroencephalography (EEG) is a non-obtrusive strategy to quantify the action of mind through the anodes appended to the scalp of a subject. Electroencephalogram is a record of the electric signs produced by the synchronous activity of mind cells over a timeframe. The fundamental goal is to accumulate and distinguish the important information through this action which can be acclimatized for giving surmising to Falsehood discovery in future analysis. This work proposes a strategy for Falsehood discovery utilizing EEG database recorded on irregular people of various age gatherings and social organizations. The factual investigation is directed utilizing MATLAB v-14. It is a superior dialect for specialized registering which spares a considerable measure of time with streamlined investigation systems. In this work center is made on Falsehood Classification by Support Vector Machine (SVM). 72 Samples are set up by making inquiries from standard poll with a Wright and wrong replies in a diverse era from the individual in wearable head unit. 52 samples are trained and 20 are tested. By utilizing Bluetooth based Neurosky’s Mindwave kit, brain waves are recorded and qualities are arranged appropriately. In this work confusion matrix is derived by matlab programs and accuracy of 56.25 % is achieved.

Wind/tornado design criteria, development to achieve required probabilistic performance goals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ng, D.S.

1991-06-01

This paper describes the strategy for developing new design criteria for a critical facility to withstand loading induced by the wind/tornado hazard. The proposed design requirements for resisting wind/tornado loads are based on probabilistic performance goals. The proposed design criteria were prepared by a Working Group consisting of six experts in wind/tornado engineering and meteorology. Utilizing their best technical knowledge and judgment in the wind/tornado field, they met and discussed the methodologies and reviewed available data. A review of the available wind/tornado hazard model for the site, structural response evaluation methods, and conservative acceptance criteria lead to proposed design criteriamore » that has a high probability of achieving the required performance goals.« less

Capability and Technology Performance Goals for the Next Step in Affordable Human Exploration of Space

NASA Technical Reports Server (NTRS)

Linne, Diane L.; Sanders, Gerald B.; Taminger, Karen M.

2015-01-01

The capability for living off the land, commonly called in-situ resource utilization, is finally gaining traction in space exploration architectures. Production of oxygen from the Martian atmosphere is called an enabling technology for human return from Mars, and a flight demonstration to be flown on the Mars 2020 robotic lander is in development. However, many of the individual components still require technical improvements, and system-level trades will be required to identify the best combination of technology options. Based largely on work performed for two recent roadmap activities, this paper defines the capability and technology requirements that will need to be achieved before this game-changing capability can reach its full potential.

Wind/tornado design criteria, development to achieve required probabilistic performance goals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ng, D.S.

This paper describes the strategy for developing new design criteria for a critical facility to withstand loading induced by the wind/tornado hazard. The proposed design requirements for resisting wind/tornado loads are based on probabilistic performance goals. The proposed design criteria were prepared by a Working Group consisting of six experts in wind/tornado engineering and meteorology. Utilizing their best technical knowledge and judgment in the wind/tornado field, they met and discussed the methodologies and reviewed available data. A review of the available wind/tornado hazard model for the site, structural response evaluation methods, and conservative acceptance criteria lead to proposed design criteriamore » that has a high probability of achieving the required performance goals.« less

An autonomous rendezvous and docking system using cruise missile technology

NASA Technical Reports Server (NTRS)

Jones, ED; Nicholson, Bruce

1991-01-01

In November 1990 General Dynamics demonstrated an AR&D system for members of the Strategic Avionics Technology Working Group. This simulation utilized prototype hardware derived from the Cruise Missile and Centaur avionics systems. The object of this proof of concept demonstration was to show that all the accuracy, reliability, and operational requirements established for a spacecraft to dock with Space Station Freedom could be met by the proposed AR&D system.

Representativeness of direct observations selected using a work-sampling equation.

PubMed

Sharp, Rebecca A; Mudford, Oliver C; Elliffe, Douglas

2015-01-01

Deciding on appropriate sampling to obtain representative samples of behavior is important but not straightforward, because the relative duration of the target behavior may affect its observation in a given sampling interval. Work-sampling methods, which offer a way to adjust the frequency of sampling according to a priori or ongoing estimates of the behavior to achieve a preselected level of representativeness, may provide a solution. Full-week observations of 7 behaviors were conducted for 3 students with autism spectrum disorder and intellectual disabilities. Work-sampling methods were used to select momentary time samples from the full time-of-interest, which produced representative samples. However, work sampling required impractically high numbers of time samples to obtain representative samples. More practical momentary time samples produced less representative samples, particularly for low-duration behaviors. The utility and limits of work-sampling methods for applied behavior analysis are discussed. © Society for the Experimental Analysis of Behavior.

Health Services Utilization, Work Absenteeism and Costs of Pandemic Influenza A (H1N1) 2009 in Spain: A Multicenter-Longitudinal Study

PubMed Central

Galante, Mariana; Garin, Olatz; Sicuri, Elisa; Cots, Francesc; García-Altés, Anna; Ferrer, Montserrat; Dominguez, Àngela; Alonso, Jordi

2012-01-01

Background The aim of this study was to estimate healthcare resource utilization, work absenteeism and cost per patient with pandemic influenza (H1N1)2009, from its beginning to March 2010, in Spain. We also estimated the economic impact on healthcare services. Methods and Findings Longitudinal, descriptive, multicenter study of in- and outpatients with confirmed diagnosis of influenza A (H1N1) in Spain. Temporal distribution of cases was comparable to that in Spain. Information of healthcare and social resources used from one week before admission (inpatient) or index-medical visit (outpatient) until recovery was gathered. Unit cost was imputed to utilization frequency for the monetary valuation of use. Mean cost per patient was calculated. A sensitivity analysis was conducted, and variables correlated with cost per patient were identified. Economic impact on the healthcare system was estimated using healthcare costs per patient and both, the reported number of confirmed and clinical cases in Spain. 172 inpatients and 224 outpatients were included. Less than 10% were over 65 years old and more than 50% had previous comorbidities. 12.8% of inpatients were admitted to the Intensive Care Unit. Mean length of hospital stay of patients not requiring critical care was 5 days (SD = 4.4). All working-inpatients and 91.7% working-outpatients went on sick leave. On average, work absenteeism was 30.5 days (SD = 20.7) for the first ones and 9 days (SD = 6.3) for the latest. Caregivers of 21.7% of inpatients and 8.5% of outpatients also had work absenteeism during 10.7 and 4.1 days on average respectively. Mean cost was €6,236/inpatient (CI95% = 1,384–14,623) and €940/outpatient (CI95% = 66–3,064). The healthcare economic burden of patients with confirmed influenza was €144,773,577 (IC95% 13,753,043–383,467,535). More than 86% of expenditures were a result of outpatients' utilization. Conclusion Cost per H1N1-patient did not defer much from seasonal influenza estimates. Hospitalizations and work absenteeism represented the highest cost per patient. PMID:22348122

Maori responsiveness in health and medical research: key issues for researchers (part 1).

PubMed

Sporle, Andrew; Koea, Jonathan

2004-08-06

Application for contestable government-research funding and ethical approval requires researchers to outline how their intended research project contributes to Maori development or advancement. When formulating their research proposals, the key issues for researchers are research utility, defining Maori, informed consent, confidentiality, issues with human tissues and genetic material, participant remuneration and recognition (koha), intellectual property, and involvement of local Maori health or social services. The most common Maori responsiveness issues in research applications can be readily approached by researchers who address straightforward methodological concerns, by working through precedents established by peers and colleagues, as well as by working with end-users of their research.

Status, Vision, and Challenges of an Intelligent Distributed Engine Control Architecture

NASA Technical Reports Server (NTRS)

Behbahani, Alireza; Culley, Dennis; Garg, Sanjay; Millar, Richard; Smith, Bert; Wood, Jim; Mahoney, Tim; Quinn, Ronald; Carpenter, Sheldon; Mailander, Bill;

Artificial Immune Algorithm for Subtask Industrial Robot Scheduling in Cloud Manufacturing

NASA Astrophysics Data System (ADS)

Suma, T.; Murugesan, R.

2018-04-01

The current generation of manufacturing industry requires an intelligent scheduling model to achieve an effective utilization of distributed manufacturing resources, which motivated us to work on an Artificial Immune Algorithm for subtask robot scheduling in cloud manufacturing. This scheduling model enables a collaborative work between the industrial robots in different manufacturing centers. This paper discussed two optimizing objectives which includes minimizing the cost and load balance of industrial robots through scheduling. To solve these scheduling problems, we used the algorithm based on Artificial Immune system. The parameters are simulated with MATLAB and the results compared with the existing algorithms. The result shows better performance than existing.

Recruitment of intuitive versus analytic thinking strategies affects the role of working memory in a gambling task.

PubMed

Gozzi, Marta; Cherubini, Paolo; Papagno, Costanza; Bricolo, Emanuela

2011-05-01

Previous studies found mixed results concerning the role of working memory (WM) in the gambling task (GT). Here, we aimed at reconciling inconsistencies by showing that the standard version of the task can be solved using intuitive strategies operating automatically, while more complex versions require analytic strategies drawing on executive functions. In Study 1, where good performance on the GT could be achieved using intuitive strategies, participants performed well both with and without a concurrent WM load. In Study 2, where analytical strategies were required to solve a more complex version of the GT, participants without WM load performed well, while participants with WM load performed poorly. In Study 3, where the complexity of the GT was further increased, participants in both conditions performed poorly. In addition to the standard performance measure, we used participants' subjective expected utility, showing that it differs from the standard measure in some important aspects.

Report of the In Situ Resources Utilization Workshop

NASA Technical Reports Server (NTRS)

Fairchild, Kyle (Editor); Mendell, Wendell W. (Editor)

1988-01-01

The results of a workshop of 50 representatives from the public and private sector which investigated the potential joint development of the key technologies and mechanisms that will enable the permanent habitation of space are presented. The workshop is an initial step to develop a joint public/private assessment of new technology requirements of future space options, to share knowledge on required technologies that may exist in the private sector, and to investigate potential joint technology development opportunities. The majority of the material was produced in 5 working groups: (1) Construction, Assembly, Automation and Robotics; (2) Prospecting, Mining, and Surface Transportation; (3) Biosystems and Life Support; (4) Materials Processing; and (5) Innovative Ventures. In addition to the results of the working groups, preliminary technology development recommendations to assist in near-term development priority decisions are presented. Finally, steps are outlined for potential new future activities and relationships among the public, private, and academic sectors.

On-call work: To sleep or not to sleep? It depends.

PubMed

Ferguson, Sally A; Paterson, Jessica L; Hall, Sarah J; Jay, Sarah M; Aisbett, Brad

On-call working time arrangements are increasingly common, involve work only in the event of an unpredictable incident and exist primarily outside of standard hours. Like other non-standard working time arrangements, on-call work disrupts sleep and can therefore have negative effects on health, safety and performance. Unlike other non-standard working time arrangements, on-call work often allows sleep opportunities between calls. Any sleep obtained during on-call periods will be beneficial for waking performance. However, there is evidence that sleep while on call may be of substantially reduced restorative value because of the expectation of receiving the call and apprehension about missing the call. In turn, waking from sleep to respond to a call may be associated with temporary increases in performance impairment. This is dependent on characteristics of both the preceding sleep, the tasks required upon waking and the availability and utility of any countermeasures to support the transition from sleep to wake. In this paper, we critically evaluate the evidence both for and against sleeping during on-call periods and conclude that some sleep, even if it is of reduced quality and broken by repeated calls, is a good strategy. We also note, however, that organisations utilising on-call working time arrangements need to systematically manage the likelihood that on-call sleep can be associated with temporary performance impairments upon waking. Given that the majority of work in this area has been laboratory-based, there is a significant need for field-based investigations of the magnitude of sleep inertia, in addition to the utility of sleep inertia countermeasures. Field studies should include working with subject matter experts to identify the real-world impacts of changes in performance associated with sleeping, or not sleeping, whilst on call.

Combination of ray-tracing and the method of moments for electromagnetic radiation analysis using reduced meshes

NASA Astrophysics Data System (ADS)

Delgado, Carlos; Cátedra, Manuel Felipe

2018-05-01

This work presents a technique that allows a very noticeable relaxation of the computational requirements for full-wave electromagnetic simulations based on the Method of Moments. A ray-tracing analysis of the geometry is performed in order to extract the critical points with significant contributions. These points are then used to generate a reduced mesh, considering the regions of the geometry that surround each critical point and taking into account the electrical path followed from the source. The electromagnetic analysis of the reduced mesh produces very accurate results, requiring a fraction of the resources that the conventional analysis would utilize.

Compact Plasma Accelerator for Micropropulsion Applications

NASA Technical Reports Server (NTRS)

Foster, John E.

2001-01-01

There is a need for a low power, light-weight (compact), high specific impulse electric propulsion device to satisfy mission requirements for microsatellite (1 to 20 kg) class missions. Satisfying these requirements entails addressing the general problem of generating a sufficiently dense plasma within a relatively small volume and then accelerating it. In the work presented here, the feasibility of utilizing a magnetic cusp to generate a dense plasma over small length scales of order 1 mm is investigated. This approach could potentially mitigate scaling issues associated with conventional ion thruster plasma containment schemes. Plume and discharge characteristics were documented using a Faraday probe and a retarding potential analyzer.

An Entry Flight Controls Analysis for a Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Calhoun, Philip

2000-01-01

The NASA Langley Research Center has been performing studies to address the feasibility of various single-stage to orbit concepts for use by NASA and the commercial launch industry to provide a lower cost access to space. Some work on the conceptual design of a typical lifting body concept vehicle, designated VentureStar(sup TM) has been conducted in cooperation with the Lockheed Martin Skunk Works. This paper will address the results of a preliminary flight controls assessment of this vehicle concept during the atmospheric entry phase of flight. The work includes control analysis from hypersonic flight at the atmospheric entry through supersonic speeds to final approach and landing at subsonic conditions. The requirements of the flight control effectors are determined over the full range of entry vehicle Mach number conditions. The analysis was performed for a typical maximum crossrange entry trajectory utilizing angle of attack to limit entry heating and providing for energy management, and bank angle to modulation of the lift vector to provide downrange and crossrange capability to fly the vehicle to a specified landing site. Sensitivity of the vehicle open and closed loop characteristics to CG location, control surface mixing strategy and wind gusts are included in the results. An alternative control surface mixing strategy utilizing a reverse aileron technique demonstrated a significant reduction in RCS torque and fuel required to perform bank maneuvers during entry. The results of the control analysis revealed challenges for an early vehicle configuration in the areas of hypersonic pitch trim and subsonic longitudinal controllability.

Flash Cracking Reactor for Waste Plastic Processing

NASA Technical Reports Server (NTRS)

Timko, Michael T.; Wong, Hsi-Wu; Gonzalez, Lino A.; Broadbelt, Linda; Raviknishan, Vinu

2013-01-01

Conversion of waste plastic to energy is a growing problem that is especially acute in space exploration applications. Moreover, utilization of heavy hydrocarbon resources (wastes, waxes, etc.) as fuels and chemicals will be a growing need in the future. Existing technologies require a trade-off between product selectivity and feedstock conversion. The objective of this work was to maintain high plastic-to-fuel conversion without sacrificing the liquid yield. The developed technology accomplishes this goal with a combined understanding of thermodynamics, reaction rates, and mass transport to achieve high feed conversion without sacrificing product selectivity. The innovation requires a reaction vessel, hydrocarbon feed, gas feed, and pressure and temperature control equipment. Depending on the feedstock and desired product distribution, catalyst can be added. The reactor is heated to the desired tempera ture, pressurized to the desired pressure, and subject to a sweep flow at the optimized superficial velocity. Software developed under this project can be used to determine optimal values for these parameters. Product is vaporized, transferred to a receiver, and cooled to a liquid - a form suitable for long-term storage as a fuel or chemical. An important NASA application is the use of solar energy to convert waste plastic into a form that can be utilized during periods of low solar energy flux. Unlike previous work in this field, this innovation uses thermodynamic, mass transport, and reaction parameters to tune product distribution of pyrolysis cracking. Previous work in this field has used some of these variables, but never all in conjunction for process optimization. This method is useful for municipal waste incinerator operators and gas-to-liquids companies.

Requirement Metrics for Risk Identification

NASA Technical Reports Server (NTRS)

Hammer, Theodore; Huffman, Lenore; Wilson, William; Rosenberg, Linda; Hyatt, Lawrence

1996-01-01

The Software Assurance Technology Center (SATC) is part of the Office of Mission Assurance of the Goddard Space Flight Center (GSFC). The SATC's mission is to assist National Aeronautics and Space Administration (NASA) projects to improve the quality of software which they acquire or develop. The SATC's efforts are currently focused on the development and use of metric methodologies and tools that identify and assess risks associated with software performance and scheduled delivery. This starts at the requirements phase, where the SATC, in conjunction with software projects at GSFC and other NASA centers is working to identify tools and metric methodologies to assist project managers in identifying and mitigating risks. This paper discusses requirement metrics currently being used at NASA in a collaborative effort between the SATC and the Quality Assurance Office at GSFC to utilize the information available through the application of requirements management tools.

Design of a Mechanical NaK Pump for Fission Space Power

NASA Technical Reports Server (NTRS)

Mireles, Omar R.; Bradley, David E.; Godfroy, Thomas

2011-01-01

Alkali liquid metal cooled fission reactor concepts are under development for spaceflight power requirements. One such concept utilizes a sodium-potassium eutectic (NaK) as the primary loop working fluid, which has specific pumping requirements. Traditionally, electromagnetic linear induction pumps have been used to provide the required flow and pressure head conditions for NaK systems but they can be limited in performance, efficiency, and number of available vendors. The objective of the project was to develop a mechanical NaK centrifugal pump that takes advantages of technology advances not available in previous liquid metal mechanical pump designs. This paper details the design, build, and performance test of a mechanical NaK pump developed at NASA Marshall Space Flight Center. The pump was designed to meet reactor cooling requirements using commercially available components modified for high temperature NaK service.

Evaluation of alternative airway management strategies in surgical repair of severe cranio-maxillofacial trauma.

PubMed

Zhang, Xinpei; Wang, Xing; Gu, Qianping; Zhang, Jie; Wu, Ruihan; Zhuang, Qianwei; Na, Li; Meng, Jian

2016-12-01

Severe cranio-maxillofacial trauma requires the utilization of alternative airway management techniques when oral and nasal routes of tracheal intubation are either not possible or contraindicated. This retrospective study evaluated the techniques of submental intubation, retromolar intubation and tracheostomy in terms of their frequency of use, time required, costs involved and associated complications in a total of 200 patients. Frequency of utilization of alternative airway management techniques was 3.63%. Tracheostomy was associated with the most severe complications, took the most time to establish and was the most expensive technique. Although retromolar intubation was not associated with any complications, it was not suitable in adults with erupted third molars and interfered with the surgical field. Submental intubation was associated with minor complications, was suitable in all cases and did not interfere with surgical access. Retromolar intubation must be considered as a first choice alternative in patients with unerupted third molars provided the surgeon is adept at working in the presence of an oral tube. Submental intubation is a good second choice when retromolar intubation is not possible or is not acceptable to the surgeon. Tracheostomy is only indicated in patients who require long term control of the airway.

A compilation of lunar and Mars exploration strategies utilizing indigenous propellants

NASA Technical Reports Server (NTRS)

Linne, Diane L.; Meyer, Michael L.

1992-01-01

The use of propellants manufactured from indigenous space materials has the potential to significantly reduce the amount of mass required to be launched from the Earth's surface. The extent of the leverage, however, along with the cost for developing the infrastructure necessary to support such a process, is unclear. Many mission analyses have been performed that have attempted to quantify the potential benefits of in situ propellant utilization. Because the planning of future space missions includes many unknowns, the presentation of any single study on the use of in situ propellants is often met with critics' claims of the inaccuracy of assumptions or omission of infrastructure requirements. The results of many such mission analyses are presented in one format. Each summarized mission analysis used different assumptions and baseline mission scenarios. The conclusion from the studies is that the use of in situ produced propellants will provide significant reductions in Earth launch requirements. This result is consistent among all of the analyses regardless of the assumptions used to obtain the quantitative results. The determination of the best propellant combination and the amount of savings will become clearer and more apparent as the technology work progresses.

Automatic mission planning algorithms for aerial collection of imaging-specific tasks

NASA Astrophysics Data System (ADS)

Sponagle, Paul; Salvaggio, Carl

2017-05-01

The rapid advancement and availability of small unmanned aircraft systems (sUAS) has led to many novel exploitation tasks utilizing that utilize this unique aerial imagery data. Collection of this unique data requires novel flight planning to accomplish the task at hand. This work describes novel flight planning to better support structure-from-motion missions to minimize occlusions, autonomous and periodic overflight of reflectance calibration panels to permit more efficient and accurate data collection under varying illumination conditions, and the collection of imagery data to study optical properties such as the bidirectional reflectance distribution function without disturbing the target in sensitive or remote areas of interest. These novel mission planning algorithms will provide scientists with additional tools to meet their future data collection needs.

Empowerment as a leadership theory.

PubMed

Rajotte, C A

1996-01-01

Leadership of today is quite different from that of Caesar, Plato, the ancient Greeks, or the ancient Egyptians. Today's leaders utilize power-sharing, trust, team-building, and empowerment. Methods to achieve empowerment include educating, leading, structuring, providing, mentoring, and actualizing. Empowerment requires change in leadership methods to be effective. One must be able to identify change and work with others for change. Through the leadership style of empowerment, vision provides a shared set of values with a customer focus. Successful organizations which practice empowerment delegate and expect people to initiate, create and to feel ownership. Nurses need to be involved in their organizations and utilize empowerment leadership to be successful leaders of the future. With empowered employees, the organization, the customer, and the employee are all winners.

The association between physical medicine and rehabilitation service utilization and disability duration following work-related fracture.

PubMed

Young, Amanda; Muhlner, Stasia; Kurowski, Alicia; Cifuentes, Manuel

2015-06-05

Rural residents with work-related fractures utilize healthcare differently and return to work (RTW) sooner than their similarly-injured urban peers. To elucidate the relationship between physical medicine and rehabilitation (PM&R) service usage and work-disability duration following work-related injury. Retrospective cohort study, employing a two-phase sequential analysis. The project involved a longitudinal analysis of PM&R utilization and work-disability duration of 2,216 people across the U.S. who fractured a bone, received PM&R services, and had at least seven days off work. In the first phase of the analysis each individual was assigned a PM&R utilization score based on how similar his or her usage was to that typical of rural residents. The second phase tested the relationship between assigned PM&R utilization scores and work-disability duration. Differences in urban versus rural PM&R utilization included less total PM&R services and fewer passive services in the first 8 weeks for rural claimants. Among those off work for more than a month, rural residents used more active services just prior to RTW, with a gradual decreasing of services leading up to RTW. Controlling for covariates, aggregate PM&R utilization scores were found to relate to time to first RTW (Hazard Ratio=1.66, p<0.005). Findings suggest that using services in a way that is more consistent with rural patterns is associated with decreased work-disability durations. Consistent with previous studies, results suggest that passive services, prolonged episodes of care, and failure to focus on transitioning to self-management are related to longer work-disability durations.

Economic and environmental optimization of a multi-site utility network for an industrial complex.

PubMed

Kim, Sang Hun; Yoon, Sung-Geun; Chae, Song Hwa; Park, Sunwon

2010-01-01

Most chemical companies consume a lot of steam, water and electrical resources in the production process. Given recent record fuel costs, utility networks must be optimized to reduce the overall cost of production. Environmental concerns must also be considered when preparing modifications to satisfy the requirements for industrial utilities, since wastes discharged from the utility networks are restricted by environmental regulations. Construction of Eco-Industrial Parks (EIPs) has drawn attention as a promising approach for retrofitting existing industrial parks to improve energy efficiency. The optimization of the utility network within an industrial complex is one of the most important undertakings to minimize energy consumption and waste loads in the EIP. In this work, a systematic approach to optimize the utility network of an industrial complex is presented. An important issue in the optimization of a utility network is the desire of the companies to achieve high profits while complying with the environmental regulations. Therefore, the proposed optimization was performed with consideration of both economic and environmental factors. The proposed approach consists of unit modeling using thermodynamic principles, mass and energy balances, development of a multi-period Mixed Integer Linear Programming (MILP) model for the integration of utility systems in an industrial complex, and an economic/environmental analysis of the results. This approach is applied to the Yeosu Industrial Complex, considering seasonal utility demands. The results show that both the total utility cost and waste load are reduced by optimizing the utility network of an industrial complex. 2009 Elsevier Ltd. All rights reserved.

Design considerations for space radiators based on the liquid sheet (LSR) concept

NASA Technical Reports Server (NTRS)

Juhasz, Albert J.; Chubb, Donald L.

1991-01-01

Concept development work on space heat rejection subsystems tailored to the requirements of various space power conversion systems is proceeding over a broad front of technologies at NASA LeRC. Included are orbital and planetary surface based radiator concepts utilizing pumped loops, a variety of heat pipe radiator concepts, and the innovative liquid sheet radiator (LSR). The basic feasibility of the LSR concept was investigated in prior work which generated preliminary information indicating the suitability of the LSR concept for space power systems requiring cycle reject heat to be radiated to the space sink at low-to-mid temperatures (300 to 400 K), with silicon oils used for the radiator working fluid. This study is directed at performing a comparative examination of LSR characteristics as they affect the basic design of low earth orbit solar dynamic power conversion systems. The power systems considered were based on the closed Brayton (CBC) and the Free Piston Stirling (FPS) cycles, each with a power output of 2 kWe and using previously tested silicone oil (Dow-Corning Me2) as the radiator working fluid. Conclusions indicate that, due to its ability for direct cold end cooling, an LSR based heat rejection subsystem is far more compatible with a Stirling space power system than with a CBC, which requires LSR coupling by means of an intermediate gas/liquid heat exchanger and adjustment of cycle operating conditions.

Problem decomposition by mutual information and force-based clustering

NASA Astrophysics Data System (ADS)

Otero, Richard Edward

The scale of engineering problems has sharply increased over the last twenty years. Larger coupled systems, increasing complexity, and limited resources create a need for methods that automatically decompose problems into manageable sub-problems by discovering and leveraging problem structure. The ability to learn the coupling (inter-dependence) structure and reorganize the original problem could lead to large reductions in the time to analyze complex problems. Such decomposition methods could also provide engineering insight on the fundamental physics driving problem solution. This work forwards the current state of the art in engineering decomposition through the application of techniques originally developed within computer science and information theory. The work describes the current state of automatic problem decomposition in engineering and utilizes several promising ideas to advance the state of the practice. Mutual information is a novel metric for data dependence and works on both continuous and discrete data. Mutual information can measure both the linear and non-linear dependence between variables without the limitations of linear dependence measured through covariance. Mutual information is also able to handle data that does not have derivative information, unlike other metrics that require it. The value of mutual information to engineering design work is demonstrated on a planetary entry problem. This study utilizes a novel tool developed in this work for planetary entry system synthesis. A graphical method, force-based clustering, is used to discover related sub-graph structure as a function of problem structure and links ranked by their mutual information. This method does not require the stochastic use of neural networks and could be used with any link ranking method currently utilized in the field. Application of this method is demonstrated on a large, coupled low-thrust trajectory problem. Mutual information also serves as the basis for an alternative global optimizer, called MIMIC, which is unrelated to Genetic Algorithms. Advancement to the current practice demonstrates the use of MIMIC as a global method that explicitly models problem structure with mutual information, providing an alternate method for globally searching multi-modal domains. By leveraging discovered problem inter- dependencies, MIMIC may be appropriate for highly coupled problems or those with large function evaluation cost. This work introduces a useful addition to the MIMIC algorithm that enables its use on continuous input variables. By leveraging automatic decision tree generation methods from Machine Learning and a set of randomly generated test problems, decision trees for which method to apply are also created, quantifying decomposition performance over a large region of the design space.

Mapping the knowledge utilization field in nursing from 1945 to 2004: a bibliometric analysis.

PubMed

Scott, Shannon D; Profetto-McGrath, Joanne; Estabrooks, Carole A; Winther, Connie; Wallin, Lars; Lavis, John N

2010-12-01

The field of knowledge utilization has been hampered by several issues including: the synonymous use of multiple terms with little attempt at definition precision; an overexamination of knowledge utilization as product, rather than a process; and a lack of progress to cross disciplinary boundaries to advance knowledge development. In order to address the challenges and current knowledge gaps in the knowledge utilization field in nursing, a comprehensive picture of the current state of the field is required. Bibliometric analyses were used to map knowledge utilization literature in nursing as an international field of study, and to identify the structure of its scientific community. Analyses of bibliographic data for 433 articles from the period 1945-2004 demonstrated three trends: (1) there has been significant recent growth and interest in this field, (2) the structure of the scientific knowledge utilization community is evolving, and (3) the Web of Science does not index the majority of journals where this literature is published. In order to enhance the accessibility and profile of this literature, and nursing's scientific literature at large, we encourage the International Academy of Nursing Editors to work collaboratively to increase the number of journals indexed in the Web of Science. ©2010 Sigma Theta Tau International.

IONAC-Lite

NASA Technical Reports Server (NTRS)

Torgerson, Jordan L.; Clare, Loren P.; Pang, Jackson

2011-01-01

The Interplanetary Overlay Net - working Protocol Accelerator (IONAC) described previously in The Inter - planetary Overlay Networking Protocol Accelerator (NPO-45584), NASA Tech Briefs, Vol. 32, No. 10, (October 2008) p. 106 (http://www.techbriefs.com/component/ content/article/3317) provides functions that implement the Delay Tolerant Networking (DTN) bundle protocol. New missions that require high-speed downlink-only use of DTN can now be accommodated by the unidirectional IONAC-Lite to support high data rate downlink mission applications. Due to constrained energy resources, a conventional software implementation of the DTN protocol can provide only limited throughput for any given reasonable energy consumption rate. The IONAC-Lite DTN Protocol Accelerator is able to reduce this energy consumption by an order of magnitude and increase the throughput capability by two orders of magnitude. In addition, a conventional DTN implementation requires a bundle database with a considerable storage requirement. In very high downlink datarate missions such as near-Earth radar science missions, the storage space utilization needs to be maximized for science data and minimized for communications protocol-related storage needs. The IONAC-Lite DTN Protocol Accelerator is implemented in a reconfigurable hardware device to accomplish exactly what s needed for high-throughput DTN downlink-only scenarios. The following are salient features of the IONAC-Lite implementation: An implementation of the Bundle Protocol for an environment that requires a very high rate bundle egress data rate. The C&DH (command and data handling) subsystem is also expected to be very constrained so the interaction with the C&DH processor and the temporary storage are minimized. Fully pipelined design so that bundle processing database is not required. Implements a lookup table-based approach to eliminate multi-pass processing requirement imposed by the Bundle Protocol header s length field structure and the SDNV (self-delimiting numeric value) data field formatting. 8-bit parallel datapath to support high data-rate missions. Reduced resource utilization implementation for missions that do not require custody transfer features. There was no known implementation of the DTN protocol in a field programmable gate array (FPGA) device prior to the current implementation. The combination of energy and performance optimization that embodies this design makes the work novel.

Validation of Land Cover Maps Utilizing Astronaut Acquired Imagery

NASA Technical Reports Server (NTRS)

Estes, John E.; Gebelein, Jennifer

1999-01-01

This report is produced in accordance with the requirements outlined in the NASA Research Grant NAG9-1032 titled "Validation of Land Cover Maps Utilizing Astronaut Acquired Imagery". This grant funds the Remote Sensing Research Unit of the University of California, Santa Barbara. This document summarizes the research progress and accomplishments to date and describes current on-going research activities. Even though this grant has technically expired, in a contractual sense, work continues on this project. Therefore, this summary will include all work done through and 5 May 1999. The principal goal of this effort is to test the accuracy of a sub-regional portion of an AVHRR-based land cover product. Land cover mapped to three different classification systems, in the southwestern United States, have been subjected to two specific accuracy assessments. One assessment utilizing astronaut acquired photography, and a second assessment employing Landsat Thematic Mapper imagery, augmented in some cases, high aerial photography. Validation of these three land cover products has proceeded using a stratified sampling methodology. We believe this research will provide an important initial test of the potential use of imagery acquired from Shuttle and ultimately the International Space Station (ISS) for the operational validation of the Moderate Resolution Imaging Spectrometer (MODIS) land cover products.

Global collaborative healthcare: assessing the resource requirements at a leading Academic Medical Center.

PubMed

Rosson, Nicole J; Hassoun, Heitham T

2017-09-20

Academic Medical Centers ("AMCs") have served as a hub of the United States ("US") health system and represented the state-of-the art in American health care for well over a century. Currently, the global healthcare market is both massive and expanding and is being altered by the unprecedented impact of technological advances and globalization. This provides AMCs a platform to enter into trans-national collaborative partnerships with healthcare organizations around the world, thus providing a means to deliver on its promise globally while also expanding and diversifying its resources. A number of leading US AMCs have engaged in global collaborative healthcare, employing different models based on services offered, global distribution, and inclination to assume risk. Engaging in these collaborations requires significant effort from across the health system, and an understanding of the resources required is paramount for effective delivery and to avoid overextension and diversion from the primary mission of these organizations. The goal of this paper is to discuss the role of US AMCs in this current global healthcare landscape and to also investigate our institutional faculty and staff resource requirements to support the operating model. We extracted and retrospectively analyzed data from the JHI Global Services database for a 3-year period (Jan, 2013-Dec, 2015) to determine total utilization (hours and full time equivalent (FTE)), utilization by profession, and clinical and non-clinical areas of expertise. JHI utilized on average 21,940 h annually, or 10.55 FTEs of faculty and staff subject matter experts. The majority of the hours are for work performed by physician faculty members from 23 departments within the School of Medicine, representing 77% percent or on average 16,894 h annually. Clinical and allied health departments had an average annual utilization of 17,642 h or 7.8 FTEs, while non-clinical departments, schools and institutes averaged 4298 h or 1.9 FTEs, representing 80.4% and 19.6% respectively. We found that significant human resources are required within a broad range of AMC subject matter expertise across multiple disciplines, and that with adequate forecasting AMCs can successfully engage in these collaborations while continuing to fulfill their core mission.

The meaning and measurement of work fatigue: Development and evaluation of the Three-Dimensional Work Fatigue Inventory (3D-WFI).

PubMed

Frone, Michael R; Tidwell, Marie-Cecile O

2015-07-01

Although work fatigue represents an important construct in several substantive areas, prior conceptual definitions and measures have been inadequate in a number of ways. The goals of the present study were to develop a conceptual definition and outline the desirable characteristics of a work fatigue measure, briefly examine several prior measures of work fatigue-related constructs, and develop and evaluate a new measure of work fatigue. The Three-Dimensional Work Fatigue Inventory (3D-WFI) provides separate and commensurate assessments of physical, mental, and emotional work fatigue. Results from a pilot study (n = 207) and a broader evaluative study of U.S. wage and salary workers (n = 2,477) suggest that the 3D-WFI is psychometrically sound and evinces a meaningful pattern of relations with variables that comprise the nomological network of work fatigue. As with all new measures, additional research is required to evaluate fully the utility of the 3D-WFI in research on work fatigue. (c) 2015 APA, all rights reserved).

How Perceptions of Mental Illness Impact EAP Utilization.

PubMed

McRee, Jayme

2017-01-01

Studies of employee assistance program (EAP) clinical use across multiple industries and multiple EAP delivery models range from highs greater than 5% to lows of less than 1 %. Despite the range in utilization, the rates of employee behaviors that indicate a behavioral health issue are significantly higher, suggesting far too little use of EAPs overall. Studies of the costs to an employer for an employee with a mental health issue are as high as 37% lost annual productivity. EAPs have attempted to raise utilization through a variety of efforts, with mixed results. Most EAP utilization initiatives fail to address the impact of stigma, misunderstandings about mental illness and the reluctance of many employees to seek counseling as an option for better management of stress, work-life balance and overall mental wellness. For both employers and EAPs, addressing the impact of stigma and perceptions of mental illness is costly, requiring greater direct employee engagement and education. However, it is a more effective means of increasing EAP use than current practices and, ultimately, can result in significantly higher net gains in productivity while reducing employers' direct costs.

Fine grained event processing on HPCs with the ATLAS Yoda system

NASA Astrophysics Data System (ADS)

Calafiura, Paolo; De, Kaushik; Guan, Wen; Maeno, Tadashi; Nilsson, Paul; Oleynik, Danila; Panitkin, Sergey; Tsulaia, Vakhtang; Van Gemmeren, Peter; Wenaus, Torre

2015-12-01

High performance computing facilities present unique challenges and opportunities for HEP event processing. The massive scale of many HPC systems means that fractionally small utilization can yield large returns in processing throughput. Parallel applications which can dynamically and efficiently fill any scheduling opportunities the resource presents benefit both the facility (maximal utilization) and the (compute-limited) science. The ATLAS Yoda system provides this capability to HEP-like event processing applications by implementing event-level processing in an MPI-based master-client model that integrates seamlessly with the more broadly scoped ATLAS Event Service. Fine grained, event level work assignments are intelligently dispatched to parallel workers to sustain full utilization on all cores, with outputs streamed off to destination object stores in near real time with similarly fine granularity, such that processing can proceed until termination with full utilization. The system offers the efficiency and scheduling flexibility of preemption without requiring the application actually support or employ check-pointing. We will present the new Yoda system, its motivations, architecture, implementation, and applications in ATLAS data processing at several US HPC centers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cohen, Timothy; Dolan, Matthew J.; El Hedri, Sonia

Simplified Models are a useful way to characterize new physics scenarios for the LHC. Particle decays are often represented using non-renormalizable operators that involve the minimal number of fields required by symmetries. Generalizing to a wider class of decay operators allows one to model a variety of final states. This approach, which we dub the $n$-body extension of Simplified Models, provides a unifying treatment of the signal phase space resulting from a variety of signals. In this paper, we present the first application of this framework in the context of multijet plus missing energy searches. The main result of thismore » work is a global performance study with the goal of identifying which set of observables yields the best discriminating power against the largest Standard Model backgrounds for a wide range of signal jet multiplicities. Our analysis compares combinations of one, two and three variables, placing emphasis on the enhanced sensitivity gain resulting from non-trivial correlations. Utilizing boosted decision trees, we compare and classify the performance of missing energy, energy scale and energy structure observables. We demonstrate that including an observable from each of these three classes is required to achieve optimal performance. In conclusion, this work additionally serves to establish the utility of $n$-body extended Simplified Models as a diagnostic for unpacking the relative merits of different search strategies, thereby motivating their application to new physics signatures beyond jets and missing energy.« less

Music and its association with epileptic disorders.

PubMed

Maguire, Melissa

2015-01-01

The association between music and epileptic seizures is complex and intriguing. Musical processing within the human brain recruits a network which involves many cortical areas that could activate as part of a temporal lobe seizure or become hyperexcitable on musical exposure as in the case of musicogenic epilepsy. The dichotomous effect of music on seizures may be explained by modification of dopaminergic circuitry or counteractive cognitive and sensory input in ictogenesis. Research has explored the utility of music as a therapy in epilepsy and while limited studies show some evidence of an effect on seizure activity; further work is required to ascertain its clinical potential. Sodium channel-blocking antiepileptic drugs, e.g., carbamazepine and oxcarbazepine, appear to effect pitch perception particularly in native-born Japanese, a rare but important adverse effect, particularly if a professional musician. Temporal lobe surgery for right lateralizing epilepsy has the capacity to effect all facets of musical processing, although risk and correlation to resection area need further research. There is a need for the development of investigative tools of musical processing that could be utilized along the surgical pathway. Similarly, work is also required in devising a musical paradigm as part of electroencephalography to improve surveillance of musicogenic seizures. These clinical applications could aid the management of epilepsy and preservation of musical ability. © 2015 Elsevier B.V. All rights reserved.

Augmenting Conceptual Design Trajectory Tradespace Exploration with Graph Theory

NASA Technical Reports Server (NTRS)

Dees, Patrick D.; Zwack, Mathew R.; Steffens, Michael; Edwards, Stephen

2016-01-01

Within conceptual design changes occur rapidly due to a combination of uncertainty and shifting requirements. To stay relevant in this fluid time, trade studies must also be performed rapidly. In order to drive down analysis time while improving the information gained by these studies, surrogate models can be created to represent the complex output of a tool or tools within a specified tradespace. In order to create this model however, a large amount of data must be collected in a short amount of time. By this method, the historical approach of relying on subject matter experts to generate the data required is schedule infeasible. However, by implementing automation and distributed analysis the required data can be generated in a fraction of the time. Previous work focused on setting up a tool called multiPOST capable of orchestrating many simultaneous runs of an analysis tool assessing these automated analyses utilizing heuristics gleaned from the best practices of current subject matter experts. In this update to the previous work, elements of graph theory are included to further drive down analysis time by leveraging data previously gathered. It is shown to outperform the previous method in both time required, and the quantity and quality of data produced.

Economically dispatching cogeneration facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hernandez, E.

Economic dispatching has been used by utilities to meet the energy demands of their customers for decades. The objective was to first load those units which cost the least to run and slowly increase the loading of more expensive units as the incremental energy price increased. Although this concept worked well for utility based systems where incremental costs rose with peak demand, the independent power producers(IPPs) and the power purchase agreements (PPAs) have drastically changed this notion. Most PPAs structured for the IPP environment have negotiated rates which remain the same during peak periods and base their electrical generation onmore » specific process steam requirements. They also must maintain the required production balance of process steam and electrical load in order to qualify as a Public Utility Regulatory Policies Act (PURPA) facility. Consequently, economically dispatching Cogeneration facilities becomes an exercise in adhering to contractual guidelines while operating the equipment in the most efficient manner possible for the given condition. How then is it possible to dispatch a Cogeneration facility that maintains the electrical load demand of JFK Airport while satisfying all of its heating and cooling needs? Contractually, Kennedy International Airport Cogen (KIAC) has specific obligations concerning electrical and thermal energy exported to JFK Airport. The facility`s impressive array of heating and cooling apparatuses together with the newly installed cogen fulfilled the airport`s needs by utilizing an endless combination of new and previously installed equipment. Moreover, in order to economically operate the plant a well structured operating curriculum was necessary.« less

Impact of Large Scale Energy Efficiency Programs On Consumer Tariffs and Utility Finances in India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abhyankar, Nikit; Phadke, Amol

2011-01-20

Large-scale EE programs would modestly increase tariffs but reduce consumers' electricity bills significantly. However, the primary benefit of EE programs is a significant reduction in power shortages, which might make these programs politically acceptable even if tariffs increase. To increase political support, utilities could pursue programs that would result in minimal tariff increases. This can be achieved in four ways: (a) focus only on low-cost programs (such as replacing electric water heaters with gas water heaters); (b) sell power conserved through the EE program to the market at a price higher than the cost of peak power purchase; (c) focusmore » on programs where a partial utility subsidy of incremental capital cost might work and (d) increase the number of participant consumers by offering a basket of EE programs to fit all consumer subcategories and tariff tiers. Large scale EE programs can result in consistently negative cash flows and significantly erode the utility's overall profitability. In case the utility is facing shortages, the cash flow is very sensitive to the marginal tariff of the unmet demand. This will have an important bearing on the choice of EE programs in Indian states where low-paying rural and agricultural consumers form the majority of the unmet demand. These findings clearly call for a flexible, sustainable solution to the cash-flow management issue. One option is to include a mechanism like FAC in the utility incentive mechanism. Another sustainable solution might be to have the net program cost and revenue loss built into utility's revenue requirement and thus into consumer tariffs up front. However, the latter approach requires institutionalization of EE as a resource. The utility incentive mechanisms would be able to address the utility disincentive of forgone long-run return but have a minor impact on consumer benefits. Fundamentally, providing incentives for EE programs to make them comparable to supply-side investments is a way of moving the electricity sector toward a model focused on providing energy services rather than providing electricity.« less

The physical work environment and end-user requirements: Investigating marine engineering officers' operational demands and ship design.

PubMed

Mallam, Steven C; Lundh, Monica

2016-08-12

Physical environments influence how individuals perceive a space and behave within it. Previous research has revealed deficiencies in ship engine department work environments, and their impact on crew productivity, health and wellbeing. Connect operational task demands to pragmatic physical design and layout solutions by implementing a user-centric perspective. Three focus groups, each consisting of three marine engineers participated in this study. Focus groups were divided into two sessions: first, to investigate the end-user's operational requirements and their relationship with ship physical design and layout. Second, criteria formulated from group discussions were applied to a ship design case study. All focus group sessions were audio recorded and transcribed verbatim. The data were analyzed using Grounded Theory. Design choices made in a ships general arrangement were described to inherently influence how individuals and teams are able to function within the system. Participants detailed logistical relationships between key areas, stressing that the work environment and physical linkages must allow for flexibility of work organization and task execution. Traditional engine control paradigms do not allow effective mitigation of traditional engine department challenges. The influence of technology and modernization of ship systems can facilitate improvement of physical environments and work organization if effectively utilized.

42 CFR 488.64 - Remote facility variances for utilization review requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Remote facility variances for utilization review... PROCEDURES Special Requirements § 488.64 Remote facility variances for utilization review requirements. (a... such facility or direct responsibility for the care of the patients being reviewed or, in the case of a...

17 CFR 210.3A-05 - Special requirements as to public utility holding companies.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Consolidated and Combined Financial Statements § 210.3A-05 Special requirements as to public utility holding companies. There shall be shown in the consolidated balance sheet of a public utility holding company the... SECURITIES AND EXCHANGE COMMISSION FORM AND CONTENT OF AND REQUIREMENTS FOR FINANCIAL STATEMENTS, SECURITIES...

Current use of carbonate rocks and lime for controlling emissions from coal-fired plants in Kentucky

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dever, G.R. Jr.

1993-03-01

Seven coal-fired power plants in Kentucky currently are operating wet-scrubbing systems for flue-gas desulfurization. Atmospheric fluidized-bed combustion (AFBC) units are being used for SO[sub 2] emission control at a petroleum refinery, and a 160-MW utility-scale AFBC demonstration plant is being operated by the Tennessee Valley Authority. A lime-based spray-dryer reactor system has been installed on an industrial boiler, and a spray-dryer system is being tested at a utility pilot-plant facility. Four of the seven power plants operate limestone-based wet-scrubbing systems and require about 885,000 tons of stone per year. Stone is obtained from Mississippian limestones, principally the Ste. Genevieve Limestone,more » produced at four quarries in Kentucky, Indiana, and Illinois. Scrubber limestone specifications include CaCO[sub 3] content (minimum 88--90%), MgCO[sub 3] content (maximum 4--6%), and grindability (maximum Bond Work Index of 11--12). Three power plants operate lime-based scrubbers, requiring about 250,000 tons of lime per year. The scrubbers currently use (1) lime manufactured from an Ordovician dolomitic limestone, mined in north-central Kentucky, and (2) carbide lime, a chemical-industry byproduct. Fluidized-bed units at the petroleum refinery require about 100,000 tons of sorbent stone per year. The sorbent consists of about equal amounts of Silurian dolomite from Ohio and Ordovician dolomitic limestone from Kentucky. The utility-scale AFBC demonstration plant uses a limestone sorbent and currently requires about 200,000 tons of stone per year. Limestone is obtained from the Ste. Genevieve in western Kentucky.« less

Health and Occupational Outcomes Among Injured, Nonstandard Shift Workers.

PubMed

Wong, Imelda S; Smith, Peter M; Mustard, Cameron A; Gignac, Monique A M

2015-11-01

This study compares health and occupational outcomes following a work-related injury for nonstandard and day-shift workers. National Population Health Survey data were used to explore outcomes 2 years post-work injury. Retrospective-matched cohort analyses examined main effects and interactions of shift schedule and work injury with changes in health, shift schedule, and labor force status. Models were adjusted for respondent characteristics, baseline health status, and occupational strength requirements. Injured nonstandard shift workers reported lower health utility index scores, compared with uninjured and injured daytime workers and uninjured nonstandard-shift workers. No significant interactions between shift and injury were found with schedule change and leaving the labor force. Injured nonstandard-shift workers are as likely to remain employed as other groups, but may be vulnerable in terms of diminished health.

Design of smart prosthetic knee utilizing magnetorheological damper

NASA Astrophysics Data System (ADS)

Gao, F.; Liu, Y. N.; Liao, W. H.

2017-04-01

In this study, based on human knee's kinetics, a smart prosthetic knee employing springs, DC motor and magnetorheological (MR) damper is designed. The MR damper is coupled in series with the springs that are mounted in parallel with the DC motor. The working principle of the prosthesis during level-ground walking is presented. During stance phase, the MR damper is powered on. The springs will store and release the negative mechanical energy for restoring the function of human knee joint. In swing phase, the MR damper is powered off for disengaging the springs. In this phase, the work of knee joint is negative. For improving the system energy efficiency, the DC motor will work as a power generator to supply required damping torque and harvest electrical energy. Finally, the design of MR damper is introduced.

Monitoring-induced disruption in skilled typewriting.

PubMed

Snyder, Kristy M; Logan, Gordon D

2013-10-01

It is often disruptive to attend to the details of one's expert performance. The current work presents four experiments that utilized a monitor to report protocol to evaluate the sufficiency of three accounts of monitoring-induced disruption. The inhibition hypothesis states that disruption results from costs associated with preparing to withhold inappropriate responses. The dual-task hypothesis states that disruption results from maintaining monitored information in working memory. The implicit-explicit hypothesis states that disruption results from explicitly monitoring details of performance that are normally implicit. The findings suggest that all three hypotheses are sufficient to produce disruption, but inhibition and dual-task costs are not necessary. Experiment 1 showed that monitoring to report was disruptive even when there was no requirement to inhibit. Experiment 2 showed that maintaining information in working memory caused some disruption but much less than monitoring to report. Experiment 4 showed that monitoring to inhibit was more disruptive than monitoring to report, suggesting that monitoring is more disruptive when it is combined with other task requirements, such as inhibition. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Spin pumping driven auto-oscillator for phase-encoded logic—device design and material requirements

NASA Astrophysics Data System (ADS)

Rakheja, S.; Kani, N.

2017-05-01

In this work, we propose a spin nano-oscillator (SNO) device where information is encoded in the phase (time-shift) of the output oscillations. The spin current required to set up the oscillations in the device is generated through spin pumping from an input nanomagnet that is precessing at RF frequencies. We discuss the operation of the SNO device, in which either the in-plane (IP) or out-of-plane (OOP) magnetization oscillations are utilized toward implementing ultra-low-power circuits. Using physical models of the nanomagnet dynamics and the spin transport through non-magnetic channels, we quantify the reliability of the SNO device using a "scaling ratio". Material requirements for the nanomagnet and the channel to ensure correct logic functionality are identified using the scaling ratio metric. SNO devices consume (2-5)× lower energy compared to CMOS devices and other spin-based devices with similar device sizes and material parameters. The analytical models presented in this work can be used to optimize the performance and scaling of SNO devices in comparison to CMOS devices at ultra-scaled technology nodes.

Utilization of BIM for automation of quantity takeoffs and cost estimation in transport infrastructure construction projects in the Czech Republic

NASA Astrophysics Data System (ADS)

Vitásek, Stanislav; Matějka, Petr

2017-09-01

The article deals with problematic parts of automated processing of quantity takeoff (QTO) from data generated in BIM model. It focuses on models of road constructions, and uses volumes and dimensions of excavation work to create an estimate of construction costs. The article uses a case study and explorative methods to discuss possibilities and problems of data transfer from a model to a price system of construction production when such transfer is used for price estimates of construction works. Current QTOs and price tenders are made with 2D documents. This process is becoming obsolete because more modern tools can be used. The BIM phenomenon enables partial automation in processing volumes and dimensions of construction units and matching the data to units in a given price scheme. Therefore price of construction can be estimated and structured without lengthy and often imprecise manual calculations. The use of BIM for QTO is highly dependent on local market budgeting systems, therefore proper push/pull strategy is required. It also requires proper requirements specification, compatible pricing database and software.

Load Management - Methods to Reduce Electric Utilities Peak Loads.

DTIC Science & Technology

1983-08-01

for electric utilities.1 The largest impact came in 1978 when the Public Utilities Regulatory Policies Act ( PURPA ) was enacted which required state...management option. 7 CHAPTER VII CONCLUSION Since PURPA was enacted in 1978, utilities have been required to investigate methods in which to more effectively

42 CFR 456.714 - DUR/surveillance and utilization review relationship.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 4 2013-10-01 2013-10-01 false DUR/surveillance and utilization review.../surveillance and utilization review relationship. (a) The retrospective DUR requirements in this subpart parallel a portion of the surveillance and utilization review (SUR) requirements in subpart A of this part...

42 CFR 456.714 - DUR/surveillance and utilization review relationship.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 4 2014-10-01 2014-10-01 false DUR/surveillance and utilization review.../surveillance and utilization review relationship. (a) The retrospective DUR requirements in this subpart parallel a portion of the surveillance and utilization review (SUR) requirements in subpart A of this part...

42 CFR 456.714 - DUR/surveillance and utilization review relationship.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false DUR/surveillance and utilization review.../surveillance and utilization review relationship. (a) The retrospective DUR requirements in this subpart parallel a portion of the surveillance and utilization review (SUR) requirements in subpart A of this part...

42 CFR 456.714 - DUR/surveillance and utilization review relationship.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false DUR/surveillance and utilization review.../surveillance and utilization review relationship. (a) The retrospective DUR requirements in this subpart parallel a portion of the surveillance and utilization review (SUR) requirements in subpart A of this part...

42 CFR 456.714 - DUR/surveillance and utilization review relationship.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 4 2012-10-01 2012-10-01 false DUR/surveillance and utilization review.../surveillance and utilization review relationship. (a) The retrospective DUR requirements in this subpart parallel a portion of the surveillance and utilization review (SUR) requirements in subpart A of this part...

Migration status, work conditions and health utilization of female sex workers in three South African cities.

PubMed

Richter, Marlise; Chersich, Matthew F; Vearey, Jo; Sartorius, Benn; Temmerman, Marleen; Luchters, Stanley

2014-02-01

Intersections between migration and sex work are underexplored in southern Africa, a region with high internal and cross-border population mobility, and HIV prevalence. Sex work often constitutes an important livelihood activity for migrant women. In 2010, sex workers trained as interviewers conducted cross-sectional surveys with 1,653 female sex workers in Johannesburg (Hillbrow and Sandton), Rustenburg and Cape Town. Most (85.3%) sex workers were migrants (1396/1636): 39.0% (638/1636) internal and 46.3% (758/1636) cross-border. Cross-border migrants had higher education levels, predominately worked part-time, mainly at indoor venues, and earned more per client than other groups. They, however, had 41% lower health service contact (adjusted odds ratio = 0.59; 95% confidence interval = 0.40-0.86) and less frequent condom use than non-migrants. Police interaction was similar. Cross-border migrants appear more tenacious in certain aspects of sex work, but require increased health service contact. Migrant-sensitive, sex work-specific health care and health education are needed.

The effect of resting blood flow occlusion on exercise tolerance and W'.

PubMed

Broxterman, Ryan M; Craig, Jesse C; Ade, Carl J; Wilcox, Samuel L; Barstow, Thomas J

2015-09-15

It has previously been postulated that the anaerobic work capacity (W') may be utilized during resting blood flow occlusion in the absence of mechanical work. We tested the hypothesis that W' would not be utilized during an initial range of time following the onset of resting blood flow occlusion, after which W' would be utilized progressively more. Seven men completed blood flow occlusion constant power severe intensity handgrip exercise to task failure following 0, 300, 600, 900, and 1,200 s of resting blood flow occlusion. The work performed above critical power (CP) was not significantly different between the 0-, 300-, and 600-s conditions and was not significantly different from the total W' available. Significantly less work was performed above CP during the 1,200-s condition than the 900-s condition (P < 0.05), while both conditions were significantly less than the 0-, 300-, and 600-s conditions (P < 0.05). The work performed above CP during these conditions was significantly less than the total W' available (P < 0.05). The utilization of W' during resting blood flow occlusion did not begin until 751 ± 118 s, after which time W' was progressively utilized. The current findings demonstrate that W' is not utilized during the initial ∼751 s of resting blood flow occlusion, but is progressively utilized thereafter, despite no mechanical work being performed. Thus, the utilization of W' is not exclusive to exercise, and a constant amount of work that can be performed above CP is not the determining mechanism of W'. Copyright © 2015 the American Physiological Society.

Can the reinforcing value of food be measured in bulimia nervosa?

PubMed Central

Schebendach, Janet; Broft, Allegra; Foltin, Richard W.; Walsh, B. Timothy

2013-01-01

Binge eating is a core clinical feature of bulimia nervosa (BN). Enhanced reinforcing value of food may play a role in this behavioral disturbance, but a systematic behavioral assessment of objective measures of the rewarding value of binge eating is lacking. The purpose of this study was to quantify the reinforcing value of food in BN patients as compared with normal controls. A progressive ratio (PR) computerized work task was completed under binge and non-binge instruction. The task consisted of 12 trials. The first trial required 50 keyboard taps to earn one portion of yogurt shake, and subsequent trials required progressive work increments of 200 taps for each additional portion. Completion of all 12 trials required 13,800 taps to earn 2,100 ml of shake. The breakpoint, defined as the largest ratio completed before a participant stopped working, was the measure of reinforcing efficacy. Ten patients and 10 controls completed the experiment. Under binge instruction, patients completed more trials and taps, and had a higher breakpoint than controls. The non-binge instruction yielded opposite findings; compared to controls, patients completed fewer trials and taps, and had a lower breakpoint. These results support the feasibility and potential utility of a PR task to quantify the reinforcing value of food in patients with BN. PMID:23178173

Moonport: Transportation node in lunar orbit

NASA Technical Reports Server (NTRS)

1987-01-01

An orbital transporation system between the Earth and Moon was designed. The design work focused on the requirements and configuration of an orbiting lunar base. The design utilized current Space Station technologies, but also focused on the specific requirements involved with a permanently manned, orbiting lunar station. A model of the recommended configuration was constructed. In order to analyze Moonport activity and requirements, a traffic model was designed, defining traffic between the lunar port, or Moonport and low Earth orbit. Also, a lunar base model was used to estimate requirements of the surface base on Moonport traffic and operations. A study was conducted to compare Moonport traffic and operations based in low lunar orbit and the L (sub 2) equilibrium point, behind the Moon. The study compared delta-V requirements to each location and possible payload deliveries to low Earth orbit from each location. Products of the Moonport location study included number of flights annually to Moonport, net payload delivery to low Earth orbit, and Moonport storage requirement.

Optimization of analytical laboratory work using computer networking and databasing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Upp, D.L.; Metcalf, R.A.

1996-06-01

The Health Physics Analysis Laboratory (HPAL) performs around 600,000 analyses for radioactive nuclides each year at Los Alamos National Laboratory (LANL). Analysis matrices vary from nasal swipes, air filters, work area swipes, liquids, to the bottoms of shoes and cat litter. HPAL uses 8 liquid scintillation counters, 8 gas proportional counters, and 9 high purity germanium detectors in 5 laboratories to perform these analyses. HPAL has developed a computer network between the labs and software to produce analysis results. The software and hardware package includes barcode sample tracking, log-in, chain of custody, analysis calculations, analysis result printing, and utility programs.more » All data are written to a database, mirrored on a central server, and eventually written to CD-ROM to provide for online historical results. This system has greatly reduced the work required to provide for analysis results as well as improving the quality of the work performed.« less

The International Space Life Sciences Strategic Planning Working Group

NASA Technical Reports Server (NTRS)

White, Ronald J.; Rabin, Robert; Lujan, Barbara F.

1993-01-01

Throughout the 1980s, ESA and the space agencies of Canada, Germany, France, Japan, and the U.S. have pursued cooperative projects bilaterally and multilaterally to prepare for, and to respond to, opportunities in space life sciences research previously unapproachable in scale and sophistication. To cope effectively with likely future space research opportunities, broad, multilateral, coordinated strategic planning is required. Thus, life scientists from these agencies have allied to form the International Space Life Sciences Strategic Planning Working Group. This Group is formally organized under a charter that specifies the purpose of the Working Group as the development of an international strategic plan for the space life sciences, with periodic revisions as needed to keep the plan current. The plan will be policy-, not operations-oriented. The Working Group also may establish specific implementation teams to coordinate multilateral science policy in specific areas; such teams have been established for space station utilization, and for sharing of flight equipment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parmesano, Hethie; Kury, Theodore J.

The price of CO{sub 2} emissions allowances affects the structure of the utility's costs, which has implications for rate design and load management programs. Depending on the design of the program to recover these costs, utility total revenue requirements - and the rate design utilized to recover these requirements - may be impacted. A new way to think about rate design may be required. (author)

Reducing regional drought vulnerabilities and multi-city robustness conflicts using many-objective optimization under deep uncertainty

NASA Astrophysics Data System (ADS)

Trindade, B. C.; Reed, P. M.; Herman, J. D.; Zeff, H. B.; Characklis, G. W.

2017-06-01

Emerging water scarcity concerns in many urban regions are associated with several deeply uncertain factors, including rapid population growth, limited coordination across adjacent municipalities and the increasing risks for sustained regional droughts. Managing these uncertainties will require that regional water utilities identify coordinated, scarcity-mitigating strategies that trigger the appropriate actions needed to avoid water shortages and financial instabilities. This research focuses on the Research Triangle area of North Carolina, seeking to engage the water utilities within Raleigh, Durham, Cary and Chapel Hill in cooperative and robust regional water portfolio planning. Prior analysis of this region through the year 2025 has identified significant regional vulnerabilities to volumetric shortfalls and financial losses. Moreover, efforts to maximize the individual robustness of any of the mentioned utilities also have the potential to strongly degrade the robustness of the others. This research advances a multi-stakeholder Many-Objective Robust Decision Making (MORDM) framework to better account for deeply uncertain factors when identifying cooperative drought management strategies. Our results show that appropriately designing adaptive risk-of-failure action triggers required stressing them with a comprehensive sample of deeply uncertain factors in the computational search phase of MORDM. Search under the new ensemble of states-of-the-world is shown to fundamentally change perceived performance tradeoffs and substantially improve the robustness of individual utilities as well as the overall region to water scarcity. Search under deep uncertainty enhanced the discovery of how cooperative water transfers, financial risk mitigation tools, and coordinated regional demand management must be employed jointly to improve regional robustness and decrease robustness conflicts between the utilities. Insights from this work have general merit for regions where adjacent municipalities can benefit from cooperative regional water portfolio planning.

Personnel scheduling using an integer programming model- an application at Avanti Blue-Nile Hotels.

PubMed

Kassa, Biniyam Asmare; Tizazu, Anteneh Eshetu

2013-01-01

In this paper, we report perhaps a first of its kind application of management science in the Ethiopian hotel industry. Avanti Blue Nile Hotels, a newly established five star hotel in Bahir Dar, is the company for which we developed an integer programming model that determines an optimal weekly shift schedule for the Hotel's engineering department personnel while satisfying several constraints including weekly rest requirements per employee, rest requirements between working shifts per employee, required number of personnel per shift, and other constraints. The model is implemented on an excel solver routine. The model enables the company's personnel department management to develop a fair personnel schedule as needed and to effectively utilize personnel resources while satisfying several technical, legal and economic requirements. These encouraging achievements make us optimistic about the gains other Ethiopian organizations can amass by introducing management science approaches in their management planning and decision making systems.

Enhanced oil recovery utilizing high-angle wells in the Frontier Formation, Badger Basin Field, Park County, Wyoming. Quarterly technical progress report, 1 January 1994--31 March 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fortmann, R.G.

1994-04-22

Sierra Energy Company, in consultation with Rim Companies, concluded that additional work was required for Subtask 2.1.4 -- Interpret data, of Task 2.1 - Acquire 3-D seismic data. The goal of this subtask was to interpret the 3-D seismic data, using a workstation, in order to locate the surface and subsurface positions for the slant and horizontal wellbores. Although this goal had been reached, more work was needed for plotting maps and seismic sections. Furthermore, it was determined that an additional look at the amplitude distribution in the Frontier sands would greatly benefit the interpretation.

78 FR 46177 - Third-Party Provision of Ancillary Services; Accounting and Financial Reporting for New Electric...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-30

...The Federal Energy Regulatory Commission (Commission) is revising its regulations to foster competition and transparency in ancillary services markets. The Commission is revising certain aspects of its current market-based rate regulations, ancillary services requirements under the pro forma open-access transmission tariff (OATT), and accounting and reporting requirements. Specifically, the Commission is revising its regulations to reflect reforms to its Avista policy governing the sale of ancillary services at market-based rates to public utility transmission providers. The Commission is also requiring each public utility transmission provider to add to its OATT Schedule 3 a statement that it will take into account the speed and accuracy of regulation resources in its determination of reserve requirements for Regulation and Frequency Response service, including as it reviews whether a self-supplying customer has made ``alternative comparable arrangements'' as required by the Schedule. The final rule also requires each public utility transmission provider to post certain Area Control Error data as described in the final rule. Finally, the Commission is revising the accounting and reporting requirements under its Uniform System of Accounts for public utilities and licensees and its forms, statements, and reports, contained in FERC Form No. 1, Annual Report of Major Electric Utilities, Licensees and Others, FERC Form No. 1-F, Annual Report for Nonmajor Public Utilities and Licensees, and FERC Form No. 3-Q, Quarterly Financial Report of Electric Utilities, Licensees, and Natural Gas Companies, to better account for and report transactions associated with the use of energy storage devices in public utility operations.

Nurses' work environment and intent to leave in Lebanese hospitals: implications for policy and practice.

PubMed

El-Jardali, Fadi; Alameddine, Mohamad; Dumit, Nuhad; Dimassi, Hani; Jamal, Diana; Maalouf, Salwa

2011-02-01

The dual burden of nursing shortages and poor work environments threatens quality of patient care and places additional pressures on resource-stretched health care systems, particularly in the Eastern Mediterranean Region (EMR). There is a paucity of research in the EMR examining the quality of nurses' work environment and its association to nurses' intent to leave their jobs/countries. Systematically examine the characteristics of nurses' work environment and their relation to nurses' intent to leave their jobs within the context of Lebanon. A secondary objective is to assess the utility and validity of the NWI-R within the context of the EMR. A cross-sectional survey design was utilized to survey a total of 1793 registered nurses in 69 Lebanese hospitals. The survey instrument included questions on nurses' background, hospital characteristics, intent to leave, and the Revised Nurse Working Index (NWI-R). Data analysis included descriptive statistics for demographic characteristics, t-test and ANOVA to assess differences in agreement scores, and a multinomial logistic regression model to predict intent to leave. Thematic analysis of open-ended questions was utilized to extract themes that fit under issues relating to nurses' work environment in Lebanese hospitals. The NWI-R subscale with the lowest mean score related to control. Younger nurses had lower scores on organizational support and career development. Regression analysis revealed that for every 1 point score decrease on career development there was a 93% increase in likelihood of reporting intent to leave country. Likewise, for every 1 point score decrease on participation there was an observed 51% and 53% increase in likelihood of reporting intent to leave country and hospital, respectively. Findings show that hospital characteristics (size, accreditation status and presence of a recruitment and retention strategy) were significantly associated with NWI-R subscales. Participation, control and career development were key work environment challenges contributing to the attrition on nurses from Lebanese hospitals. Although some of the issues identified are country specific, others would certainly be relevant to other countries in the EMR. Addressing these challenges would require a strong and coordinated action from governments, professional bodies, policy makers and health managers. Copyright © 2010 Elsevier Ltd. All rights reserved.

Modeling a distributed environment for a petroleum reservoir engineering application with software product line

NASA Astrophysics Data System (ADS)

de Faria Scheidt, Rafael; Vilain, Patrícia; Dantas, M. A. R.

2014-10-01

Petroleum reservoir engineering is a complex and interesting field that requires large amount of computational facilities to achieve successful results. Usually, software environments for this field are developed without taking care out of possible interactions and extensibilities required by reservoir engineers. In this paper, we present a research work which it is characterized by the design and implementation based on a software product line model for a real distributed reservoir engineering environment. Experimental results indicate successfully the utilization of this approach for the design of distributed software architecture. In addition, all components from the proposal provided greater visibility of the organization and processes for the reservoir engineers.

3D hyperpolarized C-13 EPI with calibrationless parallel imaging

NASA Astrophysics Data System (ADS)

Gordon, Jeremy W.; Hansen, Rie B.; Shin, Peter J.; Feng, Yesu; Vigneron, Daniel B.; Larson, Peder E. Z.

2018-04-01

With the translation of metabolic MRI with hyperpolarized 13C agents into the clinic, imaging approaches will require large volumetric FOVs to support clinical applications. Parallel imaging techniques will be crucial to increasing volumetric scan coverage while minimizing RF requirements and temporal resolution. Calibrationless parallel imaging approaches are well-suited for this application because they eliminate the need to acquire coil profile maps or auto-calibration data. In this work, we explored the utility of a calibrationless parallel imaging method (SAKE) and corresponding sampling strategies to accelerate and undersample hyperpolarized 13C data using 3D blipped EPI acquisitions and multichannel receive coils, and demonstrated its application in a human study of [1-13C]pyruvate metabolism.

Normally-Closed Zero-Leak Valve with Magnetostrictive Actuator

NASA Technical Reports Server (NTRS)

Ramspacher, Daniel J. (Inventor); Richard, James A. (Inventor)

2017-01-01

A non-pyrotechnic, normally-closed, zero-leak valve is a replacement for the pyrovalve used for both in-space and launch vehicle applications. The valve utilizes a magnetostrictive alloy for actuation, rather than pyrotechnic charges. The alloy, such as Terfenol-D, experiences magnetostriction, i.e. a gross elongation, when exposed to a magnetic field. This elongation fractures a parent metal seal, allowing fluid flow through the valve. The required magnetic field is generated by redundant coils that are isolated from the working fluid.

Bi-Directional Fast Charging Study Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tyler Gray

2012-02-01

This report details the hardware and software infrastructure needed to demonstrate the possibility of utilizing battery power in plug-in hybrid electric vehicles (PHEVs) and electric vehicles (EVs) with a bi directional fast charger to support/offset peak building loads. This document fulfills deliverable requirements for Tasks 1.2.1.2, 1.2.1.3, and 1.2.1.4 of Statement of Work (SOW) No.5799 for Electric Transportation Engineering Corporation, now ECOtality North America (NA) support for the Idaho National Laboratory (INL).

Proceedings of the distribution automation and control working group. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Caldwell, R.

1979-01-01

The meeting was sponsored by the Department of Energy, Division of Electric Energy Systems. Its purpose was to bring together some members of the electric utility community so that they might reach a common understanding on: (1) key issues and uncertainties to be resolved, (2) the existing state of the art, and (3) specific requirements for further RD&D in the area of DAC. The statements and recommendations formulated by the group on various topics are presented.

Utilizing Dynamically Coupled Cores to Form a Resilient Chip Multiprocessor

DTIC Science & Technology

2007-06-01

requires a significant deviation from previous work. For instance, we find that using the relaxed input replication model from Reunion incurs a...Circuit Width Delay Count CRC-16 16 6.65 754 CRC- SDLC -16 16 6.10 888 CRC-32 16 7.28 2260 CRC-32 32 8.60 4240 Table 1. FO4 delay and transistor count for...the operation of our proposed system is the same in all other respects. 4.4 Compatibility Across Memory Consis- tency Models The memory consistency

Periodicity and positivity of a class of fractional differential equations.

PubMed

Ibrahim, Rabha W; Ahmad, M Z; Mohammed, M Jasim

2016-01-01

Fractional differential equations have been discussed in this study. We utilize the Riemann-Liouville fractional calculus to implement it within the generalization of the well known class of differential equations. The Rayleigh differential equation has been generalized of fractional second order. The existence of periodic and positive outcome is established in a new method. The solution is described in a fractional periodic Sobolev space. Positivity of outcomes is considered under certain requirements. We develop and extend some recent works. An example is constructed.

A Tool for the Automated Collection of Space Utilization Data: Three Dimensional Space Utilization Monitor

NASA Technical Reports Server (NTRS)

Vos, Gordon A.; Fink, Patrick; Ngo, Phong H.; Morency, Richard; Simon, Cory; Williams, Robert E.; Perez, Lance C.

2017-01-01

Space Human Factors and Habitability (SHFH) Element within the Human Research Program (HRP) and the Behavioral Health and Performance (BHP) Element are conducting research regarding Net Habitable Volume (NHV), the internal volume within a spacecraft or habitat that is available to crew for required activities, as well as layout and accommodations within the volume. NASA needs methods to unobtrusively collect NHV data without impacting crew time. Data required includes metrics such as location and orientation of crew, volume used to complete tasks, internal translation paths, flow of work, and task completion times. In less constrained environments methods exist yet many are obtrusive and require significant post-processing. ?Examplesused in terrestrial settings include infrared (IR) retro-reflective marker based motion capture, GPS sensor tracking, inertial tracking, and multi-camera methods ?Due to constraints of space operations many such methods are infeasible. Inertial tracking systems typically rely upon a gravity vector to normalize sensor readings,and traditional IR systems are large and require extensive calibration. ?However, multiple technologies have not been applied to space operations for these purposes. Two of these include: 3D Radio Frequency Identification Real-Time Localization Systems (3D RFID-RTLS) ?Depth imaging systems which allow for 3D motion capture and volumetric scanning (such as those using IR-depth cameras like the Microsoft Kinect or Light Detection and Ranging / Light-Radar systems, referred to as LIDAR)

Atmospheric Capture On Mars (and Processing)

NASA Technical Reports Server (NTRS)

Muscatello, Tony

2017-01-01

The ultimate destination of NASA's human exploration program is Mars. In Situ Resource Utilization (ISRU) is a key technology required to enable such missions, as first proposed by Prof. Robert Ash in 1976. This presentation will review progress in the systems required to produce rocket propellant, oxygen, and other consumables on Mars using the carbon dioxide atmosphere and other potential resources. For many years, NASA, commercial companies, and academia have been developing, and demonstrating techniques to capture and purify Martian atmospheric gases for their utilization for the production of hydrocarbons, oxygen, and water in ISRU systems. Other gases will be required to be separated from Martian atmospheric gases to provide pure CO2 for processing elements. Significant progress has been demonstrated in CO2 collection via adsorption by molecular sieves, freezing, and direct compression. Early stage work in adsorption in Ionic Liquids followed by electrolysis to oxygen is also underway. In addition, other Martian gases, such as nitrogen and argon, occur in concentrations high enough to be useful as buffer gas and could be captured as well. Gas separation requirements include, but are not limited to the selective separation of: (1) methane and water from unreacted carbon oxides (CO2-CO) and hydrogen typical of a Sabatier-type process, (2) carbon oxides and water from unreacted hydrogen from a Reverse Water-Gas Shift process, and (3) carbon oxides from oxygen from a trash/waste processing reaction.

Manufacturing and Machining Challenges of Hybrid Aluminium Metal Matix Composites

NASA Astrophysics Data System (ADS)

Baburaja, Kammuluri; Sainadh Teja, S.; Karthik Sri, D.; Kuldeep, J.; Gowtham, V.

2017-08-01

Manufacturing which involves material removal processes or material addition processes or material transformation processes. One or all the processes to obtain the final desired properties for a material with desired shape which meets the required precision and accuracy values for the expected service life of a material in working conditions. Researchers found the utility of aluminium to be the second largest after steel. Aluminium and its metal matrix composite possess wide applications in various applications in aerospace industry, automobile industry, Constructions and even in kitchen utensils. Hybrid Al-MMCconsist of two different materials, and one will be from organic origin along with the base material. In this paper an attempt is made to bring out the importance of utilization of aluminium and the challenges concerned in manufacturing and machining of hybrid aluminium MMC.

Hydrogen Fueling Station Using Thermal Compression: a techno-economic analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriha, Kenneth; Petitpas, Guillaume; Melchionda, Michael

The goal of this project was to demonstrate the technical and economic feasibility of using thermal compression to create the hydrogen pressure necessary to operate vehicle hydrogen fueling stations. The concept of utilizing the exergy within liquid hydrogen to build pressure rather than mechanical components such as compressors or cryogenic liquid pumps has several advantages. In theory, the compressor-less hydrogen station will have lower operating and maintenance costs because the compressors found in conventional stations require large amounts of electricity to run and are prone to mechanical breakdowns. The thermal compression station also utilizes some of the energy used tomore » liquefy the hydrogen as work to build pressure, this is energy that in conventional stations is lost as heat to the environment.« less

Biodiesel production from waste frying oil using waste animal bone and solar heat.

PubMed

Corro, Grisel; Sánchez, Nallely; Pal, Umapada; Bañuelos, Fortino

2016-01-01

A two-step catalytic process for the production of biodiesel from waste frying oil (WFO) at low cost, utilizing waste animal-bone as catalyst and solar radiation as heat source is reported in this work. In the first step, the free fatty acids (FFA) in WFO were esterified with methanol by a catalytic process using calcined waste animal-bone as catalyst, which remains active even after 10 esterification runs. The trans-esterification step was catalyzed by NaOH through thermal activation process. Produced biodiesel fulfills all the international requirements for its utilization as a fuel. A probable reaction mechanism for the esterification process is proposed considering the presence of hydroxyapatite at the surface of calcined animal bones. Copyright © 2015 Elsevier Ltd. All rights reserved.

Technical prospects for utilizing extraterrestrial propellants for space exploration

NASA Technical Reports Server (NTRS)

Linne, Diane L.; Meyer, Michael L.

1991-01-01

NASA's LeRC has supported several efforts to understand how lunar and Martian produced propellants can be used to their best advantage for space exploration propulsion. A discussion of these efforts and their results is presented. A Manned Mars Mission Analysis Study identified that a more thorough technology base for propellant production is required before the the net economic benefits of in situ propellants can be determined. Evaluation of the materials available on the moon indicated metal/oxygen combinations are the most promising lunar propellants. A hazard analysis determined that several lunar metal/LOX monopropellants could be safely worked with in small quantities, and a characterization study was initiated to determine the physical and chemical properties of potential lunar monopropellant formulations. A bipropellant metal/oxygen subscale test engine which utilizes pneumatic injection of powdered metal is being pursued as an alternative to the monopropellant systems. The technology for utilizing carbon monoxide/oxygen, a potential Martian propellant, was studied in subscale ignition and rocket performance experiments.

Grid-Tied Photovoltaic Power System

NASA Technical Reports Server (NTRS)

Eichenberg, Dennis J.

2011-01-01

A grid-tied photovoltaic (PV) power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. Operating costs of a PV power system are low compared to conventional power technologies. This method can displace the highest-cost electricity during times of peak demand in most climatic regions, and thus reduce grid loading. Net metering is often used, in which independent power producers such as PV power systems are connected to the utility grid via the customers main service panels and meters. When the PV power system is generating more power than required at that location, the excess power is provided to the utility grid. The customer pays the net of the power purchased when the on-site power demand is greater than the onsite power production, and the excess power is returned to the utility grid. Power generated by the PV system reduces utility demand, and the surplus power aids the community. Modern PV panels are readily available, reliable, efficient, and economical, with a life expectancy of at least 25 years. Modern electronics have been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy equal to the modern PV panels. The grid-tied PV power system was successfully designed and developed, and this served to validate the basic principles developed, and the theoretical work that was performed. Grid-tied PV power systems are reliable, maintenance- free, long-life power systems, and are of significant value to NASA and the community. Of particular value are the analytical tools and capabilities that have been successfully developed. Performance predictions can be made confidently for grid-tied PV systems of various scales. The work was done under the NASA Hybrid Power Management (HPM) Program, which is the integration of diverse power devices in an optimal configuration for space and terrestrial applications.

43 CFR 3277.12 - What will BLM do if I do not comply with all BLM requirements pertaining to utilization operations?

Code of Federal Regulations, 2011 CFR

2011-10-01

... all BLM requirements pertaining to utilization operations? 3277.12 Section 3277.12 Public Lands... § 3277.12 What will BLM do if I do not comply with all BLM requirements pertaining to utilization... corrective action within a specific time period. If the noncompliance continues or is serious in nature, BLM...

Utilization requirements. A southern California Gas Company project SAGE report: Utilization requirements

NASA Technical Reports Server (NTRS)

Barbieri, R. H.; Schoen, R.; Hirshberg, A. S.

1978-01-01

Utilization requirements are given and comparisons made of two phase III SAGE (solar assisted gas energy) installations in California: (1) a retrofit installation in an existing apartment building in El Toro, and (2) an installation in a new apartment building in Upland. Such testing in the field revealed the requirements to be met if SAGE-type installations are to become commercially practical on a widespread basis in electric and gas energy usage.

Implications of workforce and financing changes for primary care practice utilization, revenue, and cost: a generalizable mathematical model for practice management.

PubMed

Basu, Sanjay; Landon, Bruce E; Song, Zirui; Bitton, Asaf; Phillips, Russell S

2015-02-01

Primary care practice transformations require tools for policymakers and practice managers to understand the financial implications of workforce and reimbursement changes. To create a simulation model to understand how practice utilization, revenues, and expenses may change in the context of workforce and financing changes. We created a simulation model estimating clinic-level utilization, revenues, and expenses using user-specified or public input data detailing practice staffing levels, salaries and overhead expenditures, patient characteristics, clinic workload, and reimbursements. We assessed whether the model could accurately estimate clinic utilization, revenues, and expenses across the nation using labor compensation, medical expenditure, and reimbursements databases, as well as cost and revenue data from independent practices of varying size. We demonstrated the model's utility in a simulation of how utilization, revenue, and expenses would change after hiring a nurse practitioner (NP) compared with hiring a part-time physician. Modeled practice utilization and revenue closely matched independent national utilization and reimbursement data, disaggregated by patient age, sex, race/ethnicity, insurance status, and ICD diagnostic group; the model was able to estimate independent revenue and cost estimates, with highest accuracy among larger practices. A demonstration analysis revealed that hiring an NP to work independently with a subset of patients diagnosed with diabetes or hypertension could increase net revenues, if NP visits involve limited MD consultation or if NP reimbursement rates increase. A model of utilization, revenue, and expenses in primary care practices may help policymakers and managers understand the implications of workforce and financing changes.

Grid accounting service: state and future development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levshina, T.; Sehgal, C.; Bockelman, B.

2014-01-01

During the last decade, large-scale federated distributed infrastructures have been continually developed and expanded. One of the crucial components of a cyber-infrastructure is an accounting service that collects data related to resource utilization and identity of users using resources. The accounting service is important for verifying pledged resource allocation per particular groups and users, providing reports for funding agencies and resource providers, and understanding hardware provisioning requirements. It can also be used for end-to-end troubleshooting as well as billing purposes. In this work we describe Gratia, a federated accounting service jointly developed at Fermilab and Holland Computing Center at Universitymore » of Nebraska-Lincoln. The Open Science Grid, Fermilab, HCC, and several other institutions have used Gratia in production for several years. The current development activities include expanding Virtual Machines provisioning information, XSEDE allocation usage accounting, and Campus Grids resource utilization. We also identify the direction of future work: improvement and expansion of Cloud accounting, persistent and elastic storage space allocation, and the incorporation of WAN and LAN network metrics.« less

48 CFR 41.301 - Requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Requirements. 41.301... CONTRACTING ACQUISITION OF UTILITY SERVICES Requests for Assistance 41.301 Requirements. (a) Requests for... utility service requirements, the agency shall furnish the information in paragraph (a) of this section...

48 CFR 41.301 - Requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Requirements. 41.301... CONTRACTING ACQUISITION OF UTILITY SERVICES Requests for Assistance 41.301 Requirements. (a) Requests for... utility service requirements, the agency shall furnish the information in paragraph (a) of this section...

Wind Movement Comparison Between Student Dormitory 2 and 3 ITERA and The Correlation Toward its Indoor Thermal Comfort

NASA Astrophysics Data System (ADS)

Perdana Khidmat, Rendy; Donny Koerniawan, M.; Suhendri

2018-05-01

Student dormitory is a semi-private building that designated to occupies large number of habitats. This type of building mostly designated in simple type of vertical housing. In the context of utilization, dormitory surely requires indoor thermal comfort yet in the same way it requires the energy efficiency as well. Building in a tropical climate country is expected to be adequate to adopt a potention from its surrounding in order to switch air conditioner and gain efficiency in energy consume. One of its key factors is wind. This paper tries to describe and investigate wind movement that works on two different type of student dormitory in Sumatera Institute of Technology. The distinct difference between two blocks is one of the tower block utilizes void meanwhile the other are not. This research is conducted by using Computational Fluid Dynamic (CFD) based software. This study is expected to provide an overview of the wind movement and its effect on air temperature and its correlation to the indoor thermal comfort in both buildings.

Centralized mission planning and scheduling system for the Landsat Data Continuity Mission

USGS Publications Warehouse

Kavelaars, Alicia; Barnoy, Assaf M.; Gregory, Shawna; Garcia, Gonzalo; Talon, Cesar; Greer, Gregory; Williams, Jason; Dulski, Vicki

2014-01-01

Satellites in Low Earth Orbit provide missions with closer range for studying aspects such as geography and topography, but often require efficient utilization of space and ground assets. Optimizing schedules for these satellites amounts to a complex planning puzzle since it requires operators to face issues such as discontinuous ground contacts, limited onboard memory storage, constrained downlink margin, and shared ground antenna resources. To solve this issue for the Landsat Data Continuity Mission (LDCM, Landsat 8), all the scheduling exchanges for science data request, ground/space station contact, and spacecraft maintenance and control will be coordinated through a centralized Mission Planning and Scheduling (MPS) engine, based upon GMV’s scheduling system flexplan9 . The synchronization between all operational functions must be strictly maintained to ensure efficient mission utilization of ground and spacecraft activities while working within the bounds of the space and ground resources, such as Solid State Recorder (SSR) and available antennas. This paper outlines the functionalities that the centralized planning and scheduling system has in its operational control and management of the Landsat 8 spacecraft.

Lunar oasis

NASA Technical Reports Server (NTRS)

Duke, Michael B.; Niehoff, John

1989-01-01

The 'lunar oasis' emphasizes development toward self-sufficiency in order to reduce dependence on the earth for resupply, and to enable expansion utilizing indigeneous resources. The oasis phase includes: (1) habitation and work facilities for 10 people, (2) capability for extraction of volatile consumables (H2O, O2, N2, etc.) from indigenous resources for resupply of losses and filling of reservoirs, and (3) a highly closed life support system, including food production. In the consolidation phase, the base grows from 10 to 30 crewmembers. Lunar resources are used for expanding the lunar foothold, including construction of habitats, extraction of metals for the fabrication of products for maintenance and repair, and expansion of the power system. The strategy does not produce propellants for space transportation. A 10-year scenario is laid out, which contains all elements needed to allow the base to enter a self-expanding utilization phase. Three lunar missions yer year, two cargo missions and one crew flight, are required. At the end of a decade, the base is producing more than it requires for its continued support, although it is unlikely to be completely self-sufficient.

Distributed Data Integration Infrastructure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Critchlow, T; Ludaescher, B; Vouk, M

The Internet is becoming the preferred method for disseminating scientific data from a variety of disciplines. This can result in information overload on the part of the scientists, who are unable to query all of the relevant sources, even if they knew where to find them, what they contained, how to interact with them, and how to interpret the results. A related issue is keeping up with current trends in information technology often taxes the end-user's expertise and time. Thus instead of benefiting from this information rich environment, scientists become experts on a small number of sources and technologies, usemore » them almost exclusively, and develop a resistance to innovations that can enhance their productivity. Enabling information based scientific advances, in domains such as functional genomics, requires fully utilizing all available information and the latest technologies. In order to address this problem we are developing a end-user centric, domain-sensitive workflow-based infrastructure, shown in Figure 1, that will allow scientists to design complex scientific workflows that reflect the data manipulation required to perform their research without an undue burden. We are taking a three-tiered approach to designing this infrastructure utilizing (1) abstract workflow definition, construction, and automatic deployment, (2) complex agent-based workflow execution and (3) automatic wrapper generation. In order to construct a workflow, the scientist defines an abstract workflow (AWF) in terminology (semantics and context) that is familiar to him/her. This AWF includes all of the data transformations, selections, and analyses required by the scientist, but does not necessarily specify particular data sources. This abstract workflow is then compiled into an executable workflow (EWF, in our case XPDL) that is then evaluated and executed by the workflow engine. This EWF contains references to specific data source and interfaces capable of performing the desired actions. In order to provide access to the largest number of resources possible, our lowest level utilizes automatic wrapper generation techniques to create information and data wrappers capable of interacting with the complex interfaces typical in scientific analysis. The remainder of this document outlines our work in these three areas, the impact our work has made, and our plans for the future.« less

TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT TO SAFELY AND EFFECTIVELY COMPLETE NUCLEAR CONSTRUCTION WORK

DOE Office of Scientific and Technical Information (OSTI.GOV)

LESO KF; HAMILTON HM; FARNER M

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipmentmore » and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small contractor is mentored and supported utilizing the principles of the Construction Industry Institute (CII) Partnering process. Some of the key mentoring and partnering areas that are explored in this paper are, internal and external safety professional support, subcontractor safety teams and the interface with project and site safety teams, quality assurance program support to facilitate compliance with NQA-1, construction, team roles and responsibilities, work definition for successful fixed price contracts, scheduling and interface with project schedules and cost projection/accruals. The practical application of the CII Partnering principles, with the Construction Management expertise of URS, has led to a highly successful construction model that also meets small business contracting goals.« less

Multigenerational challenges in academic medicine: UCDavis's responses.

PubMed

Howell, Lydia Pleotis; Servis, Gregg; Bonham, Ann

2005-06-01

Academic medicine is a unique work environment, one of the few where members of four different generations regularly interact and where multigenerational teams are key to fulfilling its missions, particularly education. This can lead to increased creativity, but also to intergenerational conflict, since each generation has different values and expectations. The authors describe multigenerational challenges confronted at the University of California, Davis, School of Medicine, and that school's responses to them. These challenges include issues related to work hours, workload, compensation, evaluation for advancement, recruitment and retention, and attendance at required meetings. Awareness of the different generational qualities and values allowed the school of medicine to identify the multigenerational origin of many of these ongoing issues and challenges and to plan appropriate solutions within the Office of Academic Affairs. These include policy changes related to work-life balance, utilizing multiple faculty tracks with different roles, allowing part-time faculty appointments, creating a variety of faculty development programs geared toward different generational needs (which utilize flexible modules, menus of options, and alternative technologies for presentation), defining appropriate reward and incentives through compensations plans, and creating peer-reviewed awards. The authors conclude that these efforts mitigate conflict, promote diversity, and allow multigenerational teams to function more effectively and creatively in education, research, and clinical care. Ongoing evaluation will further refine this approach.

Does Synergy Exist in Nursing? A Concept Analysis.

PubMed

Witges, Kim A; Scanlan, Judith M

2015-01-01

The aim is to analyze the concept of synergy, particularly as the concept applies to teamwork, and determine if the concept has utility in improving the work environment for nurses. Tackling nursing shortages that result from a poor work environment is a priority for many nurse leaders. Producing synergy among teams may be an effective strategy in enhancing the work environment. However, the understanding of synergy and the ability to produce synergy among teams has been seldom highlighted or discussed within nursing literature. Walker and Avant's approach was used to guide this concept analysis of synergy. Literature searches involved databases (PsycInfo, Medline, Cumulative Index for Nursing and Allied Health Literature [CINAHL], and Scopus), Internet search engines (Google), and hand searches. The analysis suggests that synergy is an outcome of the successful collaboration of the following three attributes: group cohesion, the pursuit of a common goal, and the achievement of a positive gain, considerably more than what was thought possible by the group. The foundation for this accomplishment requires an underlying feeling of special importance, the acknowledgment of each member's role, and open communication and dialogue among members. Nursing leaders would benefit from a broader understanding of synergy, and the mindful application and utility of synergy as an outcome of effective teamwork among nurses. © 2014 Wiley Periodicals, Inc.

Social Work Science and Knowledge Utilization

ERIC Educational Resources Information Center

Marsh, Jeanne C.; Reed, Martena

2016-01-01

Objective: This article advances understanding of social work science by examining the content and methods of highly utilized or cited journal articles in social work. Methods: A data base of the 100 most frequently cited articles from 79 social work journals was coded and categorized into three primary domains: content, research versus…

Communication Simulations for Power System Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuller, Jason C.; Ciraci, Selim; Daily, Jeffrey A.

2013-05-29

New smart grid technologies and concepts, such as dynamic pricing, demand response, dynamic state estimation, and wide area monitoring, protection, and control, are expected to require considerable communication resources. As the cost of retrofit can be high, future power grids will require the integration of high-speed, secure connections with legacy communication systems, while still providing adequate system control and security. While considerable work has been performed to create co-simulators for the power domain with load models and market operations, limited work has been performed in integrating communications directly into a power domain solver. The simulation of communication and power systemsmore » will become more important as the two systems become more inter-related. This paper will discuss ongoing work at Pacific Northwest National Laboratory to create a flexible, high-speed power and communication system co-simulator for smart grid applications. The framework for the software will be described, including architecture considerations for modular, high performance computing and large-scale scalability (serialization, load balancing, partitioning, cross-platform support, etc.). The current simulator supports the ns-3 (telecommunications) and GridLAB-D (distribution systems) simulators. Ongoing and future work will be described, including planned future expansions for a traditional transmission solver. A test case using the co-simulator, utilizing a transactive demand response system created for the Olympic Peninsula and AEP gridSMART demonstrations, requiring two-way communication between distributed and centralized market devices, will be used to demonstrate the value and intended purpose of the co-simulation environment.« less

[Development of New Mathematical Methodology in Air Traffic Control for the Analysis of Hybrid Systems

NASA Technical Reports Server (NTRS)

Hermann, Robert

1997-01-01

The aim of this research is to develop new mathematical methodology for the analysis of hybrid systems of the type involved in Air Traffic Control (ATC) problems. Two directions of investigation were initiated. The first used the methodology of nonlinear generalized functions, whose mathematical foundations were initiated by Colombeau and developed further by Oberguggenberger; it has been extended to apply to ordinary differential. Systems of the type encountered in control in joint work with the PI and M. Oberguggenberger. This involved a 'mixture' of 'continuous' and 'discrete' methodology. ATC clearly involves mixtures of two sorts of mathematical problems: (1) The 'continuous' dynamics of a standard control type described by ordinary differential equations (ODE) of the form: {dx/dt = f(x, u)} and (2) the discrete lattice dynamics involved of cellular automata. Most of the CA literature involves a discretization of a partial differential equation system of the type encountered in physics problems (e.g. fluid and gas problems). Both of these directions requires much thinking and new development of mathematical fundamentals before they may be utilized in the ATC work. Rather than consider CA as 'discretization' of PDE systems, I believe that the ATC applications will require a completely different and new mathematical methodology, a sort of discrete analogue of jet bundles and/or the sheaf-theoretic techniques to topologists. Here too, I have begun work on virtually 'virgin' mathematical ground (at least from an 'applied' point of view) which will require considerable preliminary work.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riley, H.W. Jr.

Over the years, utilities have been going through cost cutting measures and efficiency improvements in an effort to be more competitive or stay competitive within their market territory. The next logical step for a utility to take is to promote Creativity. With a creative environment in place, utilities can keep pace with the changes in the industry and maintain or attain their competitive advantage. The goal of the creative electric utility work-force is to keep up with changes in the industry and become more competitive as the market becomes more competitive. Utilities can change the way they do business bymore » utilizing an effectively trained and skilled work-force on the subject of creative thinking. Creativity within a work-force depends on the employees desire to understand difficult aspects of his or her life. This paper will provide the foundation for linking Creativity and the electric utility industry.« less

Lightning protection of distribution systems

NASA Astrophysics Data System (ADS)

Darveniza, M.; Uman, M. A.

1982-09-01

Research work on the lightning protection of distribution systems is described. The rationale behind the planning of the first major phase of the work - the field experiments conducted in the Tampa Bay area during August 1978 and July to September 1979 is explained. The aims of the field work were to characterize lightning in the Tampa Bay area, and to identify the lightning parameters associated with the occurrence of line outages and equipment damage on the distribution systems of the participating utilities. The equipment developed for these studies is fully described. The field work provided: general data on lightning - e.g., electric and magnetic fields of cloud and ground flashes; data from automated monitoring of lightning activity; stroke current waveshapes and peak currents measured at distribution arresters; and line outage and equipment damage on 13 kV networks in the Tampa Bay area. Computer aided analyses were required to collate and to process the accumulated data. The computer programs developed for this work are described.

A comparison of three methods for estimating the requirements for medical specialists: the case of otolaryngologists.

PubMed Central

Anderson, G F; Han, K C; Miller, R H; Johns, M E

1997-01-01

OBJECTIVE: To compare three methods of computing the national requirements for otolaryngologists in 1994 and 2010. DATA SOURCES: Three large HMOs, a Delphi panel, the Bureau of Health Professions (BHPr), and published sources. STUDY DESIGN: Three established methods of computing requirements for otolaryngologists were compared: managed care, demand-utilization, and adjusted needs assessment. Under the managed care model, a published method based on reviewing staffing patterns in HMOs was modified to estimate the number of otolaryngologists. We obtained from BHPr estimates of work force projections from their demand model. To estimate the adjusted needs model, we convened a Delphi panel of otolaryngologists using the methodology developed by the Graduate Medical Education National Advisory Committee (GMENAC). DATA COLLECTION/EXTRACTION METHODS: Not applicable. PRINCIPAL FINDINGS: Wide variation in the estimated number of otolaryngologists required occurred across the three methods. Within each model it was possible to alter the requirements for otolaryngologists significantly by changing one or more of the key assumptions. The managed care model has a potential to obtain the most reliable estimates because it reflects actual staffing patterns in institutions that are attempting to use physicians efficiently. CONCLUSIONS: Estimates of work force requirements can vary considerably if one or more assumptions are changed. In order for the managed care approach to be useful for actual decision making concerning the appropriate number of otolaryngologists required, additional research on the methodology used to extrapolate the results to the general population is necessary. PMID:9180613

Fuzzy Naive Bayesian model for medical diagnostic decision support.

PubMed

Wagholikar, Kavishwar B; Vijayraghavan, Sundararajan; Deshpande, Ashok W

2009-01-01

This work relates to the development of computational algorithms to provide decision support to physicians. The authors propose a Fuzzy Naive Bayesian (FNB) model for medical diagnosis, which extends the Fuzzy Bayesian approach proposed by Okuda. A physician's interview based method is described to define a orthogonal fuzzy symptom information system, required to apply the model. For the purpose of elaboration and elicitation of characteristics, the algorithm is applied to a simple simulated dataset, and compared with conventional Naive Bayes (NB) approach. As a preliminary evaluation of FNB in real world scenario, the comparison is repeated on a real fuzzy dataset of 81 patients diagnosed with infectious diseases. The case study on simulated dataset elucidates that FNB can be optimal over NB for diagnosing patients with imprecise-fuzzy information, on account of the following characteristics - 1) it can model the information that, values of some attributes are semantically closer than values of other attributes, and 2) it offers a mechanism to temper exaggerations in patient information. Although the algorithm requires precise training data, its utility for fuzzy training data is argued for. This is supported by the case study on infectious disease dataset, which indicates optimality of FNB over NB for the infectious disease domain. Further case studies on large datasets are required to establish utility of FNB.

Optical slotted circuit switched network: a bandwidth efficient alternative to wavelength-routed network

NASA Astrophysics Data System (ADS)

Li, Yan; Collier, Martin

2007-11-01

Wavelength-routed networks have received enormous attention due to the fact that they are relatively simple to implement and implicitly offer Quality of Service (QoS) guarantees. However, they suffer from a bandwidth inefficiency problem and require complex Routing and Wavelength Assignment (RWA). Most attempts to address the above issues exploit the joint use of WDM and TDM technologies. The resultant TDM-based wavelength-routed networks partition the wavelength bandwidth into fixed-length time slots organized as a fixed-length frame. Multiple connections can thus time-share a wavelength and the grooming of their traffic leads to better bandwidth utilization. The capability of switching in both wavelength and time domains in such networks also mitigates the RWA problem. However, TMD-based wavelength-routed networks work in synchronous mode and strict synchronization among all network nodes is required. Global synchronization for all-optical networks which operate at extremely high speed is technically challenging, and deploying an optical synchronizer for each wavelength involves considerable cost. An Optical Slotted Circuit Switching (OSCS) architecture is proposed in this paper. In an OSCS network, slotted circuits are created to better utilize the wavelength bandwidth than in classic wavelength-routed networks. The operation of the protocol is such as to avoid the need for global synchronization required by TDM-based wavelength-routed networks.

Estimation of utility weights for human papilloma virus-related health states according to disease severity.

PubMed

Ock, Minsu; Park, Jeong-Yeol; Son, Woo-Seung; Lee, Hyeon-Jeong; Kim, Seon-Ha; Jo, Min-Woo

2016-11-28

A cost-utility study of a human papilloma virus (HPV) vaccine requires that the utility weights for HPV-related health states (i.e., cervical intraepithelial neoplasia (CIN), cervical cancer, and condyloma) be evaluated. The aim of the present study was to determine the utility weights for HPV-related health states. Hypothetical standardised health states related to HPV were developed based on patient education material and previous publications. To fully reflect disease progression from diagnosis to prognosis, each health state comprised four parts (diagnosis, symptoms, treatment, and progression and prognosis). Nine-hundred members from the Korean general population evaluated the HPV-related health states using a visual analogue scale (VAS) and a standard gamble (SG) approach, which were administered face-to-face via computer-assisted interview. The mean utility values were calculated for each HPV-related health state. According to the VAS, the highest utility (0.73) was HPV-positive status, followed by condyloma (0.66), and CIN grade I (0.61). The lowest utility (0.18) was cervical cancer requiring chemotherapy without surgery, followed by cervical cancer requiring chemoradiation therapy (0.42). SG revealed that the highest utility (0.83) was HPV-positive status, followed by condyloma (0.78), and CIN grade I (0.77). The lowest utility (0.43) was cervical cancer requiring chemotherapy without surgery, followed by cervical cancer requiring chemoradiation therapy (0.60). This study was based on a large sample derived from the general Korean population; therefore, the calculated utility weights might be useful for evaluating the economic benefit of cancer screening and HPV vaccination programs.

10 CFR 34.71 - Utilization logs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Utilization logs. 34.71 Section 34.71 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.71 Utilization logs. (a) Each licensee shall maintain...

10 CFR 34.71 - Utilization logs.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Utilization logs. 34.71 Section 34.71 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.71 Utilization logs. (a) Each licensee shall maintain...

10 CFR 34.71 - Utilization logs.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Utilization logs. 34.71 Section 34.71 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.71 Utilization logs. (a) Each licensee shall maintain...

10 CFR 34.71 - Utilization logs.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Utilization logs. 34.71 Section 34.71 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.71 Utilization logs. (a) Each licensee shall maintain...

10 CFR 34.71 - Utilization logs.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Utilization logs. 34.71 Section 34.71 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.71 Utilization logs. (a) Each licensee shall maintain...

Commercial, environmental and legislative factors that influence the implementation of fuel cells

NASA Astrophysics Data System (ADS)

Serfass, Jeffrey A.; Bergman, Michael K.; Rodenhiser, Wendy

1994-04-01

Fuel cells and other advanced electric-generation technologies have not experienced a record of successful commercialization efforts. To lower costs for these technologies, it requires substantial production volumes with a significant investment in manufacturing facilities, all dependent on developer confidence in the ultimate market. Yet, market acceptance by buyers requires an adequate demonstration of technical performance and an assurance that these lower costs can be reached. In addition to this fundamental commercialization challenge, there are significant external factors that are greatly influencing the market's (utility's) future implementation of new alternative energy-generating technologies. The factor that has possibly the greatest impact today is the public demand for environmentally benign and renewable resource technologies. There is a growing trend of involvement by consumers, regulators and intervenors in the business and utility industry that is shifting the economic playing field by which industries make resource decisions. Concerns over air pollution, global warming, acid precipitation, depletion of the ozone layer and the hazards of electromagnetic fields (EMF) from power lines, have all led to more stringent regulations and environmental mandates. The utility business environment itself is rapidly changing. Higher public expectations from energy providers and increasing competition are leading to major changes in the American utility sector. Competitive requirements to reduce the cost of utility service is leading to business decisions that provide both opportunities and problems for increased use of alternative energy-generating technologies, like fuel cells, and/or renewables, such as wind and solar photovoltaics. Bringing new energy technologies to market is very expensive and this financial burden cannot be shouldered by the market, manufacturers or federal government alone. Further, for the market to assume a key position in early commercialization, the technology must offer a strategic and competitive advantage to early buyers. In order to break this problematic cycle of investments depending on market assurance and of market reluctance until cost goals are met, fresh approaches must be sought to address the unique challenges of each commercialization effort. Market-driven collaborations in which potential buyers, such as electric utilities, work together to define and implement a commercialization program that meets the market's requirements, with one or more suppliers, and with the federal government as a catalyst, provide perhaps the best opportunity for further commercialization of renewable energy and energy-efficient technologies. The key is that the market - not government agencies - determines the objectives and manages the resulting program. Two examples of such collaborations, the Fuel Cell Commercialization Group (FCCG) and the Utility PhotoVoltaic Group (UPVG), have so far proven to be successful in their new technology commercialization attempts.

Conceptual definition of a technology development mission for advanced solar dynamic power systems

NASA Technical Reports Server (NTRS)

Migra, R. P.

1986-01-01

An initial conceptual definition of a technology development mission for advanced solar dynamic power systems is provided, utilizing a space station to provide a dedicated test facility. The advanced power systems considered included Brayton, Stirling, and liquid metal Rankine systems operating in the temperature range of 1040 to 1400 K. The critical technologies for advanced systems were identified by reviewing the current state of the art of solar dynamic power systems. The experimental requirements were determined by planning a system test of a 20 kWe solar dynamic power system on the space station test facility. These requirements were documented via the Mission Requirements Working Group (MRWG) and Technology Development Advocacy Group (TDAG) forms. Various concepts or considerations of advanced concepts are discussed. A preliminary evolutionary plan for this technology development mission was prepared.

A gas flow indicator for portable life support systems

NASA Technical Reports Server (NTRS)

Bass, R. L., III; Schroeder, E. C.

1975-01-01

A three-part program was conducted to develop a gas flow indicator (GFI) to monitor ventilation flow in a portable life support system. The first program phase identified concepts which could potentially meet the GFI requirements. In the second phase, a working breadboard GFI, based on the concept of a pressure sensing diaphragm-aneroid assembly connected to a venturi, was constructed and tested. Extensive testing of the breadboard GFI indicated that the design would meet all NASA requirements including eliminating problems experienced with the ventilation flow sensor used in the Apollo program. In the third program phase, an optimized GFI was designed by utilizing test data obtained on the breadboard unit. A prototype unit was constructed using prototype materials and fabrication techniques, and performance tests indicated that the prototype GFI met or exceeded all requirements.

Citrulline protects Streptococcus pyogenes from acid stress using the arginine deiminase pathway and the F1Fo-ATPase.

PubMed

Cusumano, Zachary T; Caparon, Michael G

2015-04-01

A common stress encountered by both pathogenic and environmental bacteria is exposure to a low-pH environment, which can inhibit cell growth and lead to cell death. One major defense mechanism against this stress is the arginine deiminase (ADI) pathway, which catabolizes arginine to generate two ammonia molecules and one molecule of ATP. While this pathway typically relies on the utilization of arginine, citrulline has also been shown to enter into the pathway and contribute to protection against acid stress. In the pathogenic bacterium Streptococcus pyogenes, the utilization of citrulline has been demonstrated to contribute to pathogenesis in a murine model of soft tissue infection, although the mechanism underlying its role in infection is unknown. To gain insight into this question, we analyzed a panel of mutants defective in different steps in the ADI pathway to dissect how arginine and citrulline protect S. pyogenes in a low-pH environment. While protection provided by arginine utilization occurred through the buffering of the extracellular environment, citrulline catabolism protection was pH independent, requiring the generation of ATP via the ADI pathway and a functional F1Fo-ATP synthase. This work demonstrates that arginine and citrulline catabolism protect against acid stress through distinct mechanisms and have unique contributions to virulence during an infection. An important aspect of bacterial pathogenesis is the utilization of host-derived nutrients during an infection for growth and virulence. Previously published work from our lab identified a unique role for citrulline catabolism in Streptococcus pyogenes during a soft tissue infection. The present article probes the role of citrulline utilization during this infection and its contribution to protection against acid stress. This work reveals a unique and concerted action between the catabolism of citrulline and the F1Fo-ATPase that function together to provide protection for bacteria in a low-pH environment. Dissection of these collaborative pathways highlights the complexity of bacterial infections and the contribution of atypical nutrients, such as citrulline, to pathogenesis. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

A feasibility work on the applications of MRE to automotive components

NASA Astrophysics Data System (ADS)

Kim, S. H.; Park, Y. J.; Cha, A. R.; Kim, G. W.; Bang, J. H.; Lim, C. S.; Choi, S. B.

2018-03-01

A feasibility work on the application of magneto-rheological elastomers (MREs) to automotive components, such as engine mounts is presented. While vehicle components require the high resonance frequency in terms of ride quality and handling, it is required to have the low resonance frequency to isolate the incoming vibration. With the conventional automotive technologies, it is challenging to combine these two conflicting performance trade-offs, ride quality including handling, and NVH (noise, vibration and harshness). Over the last decades, MREs, one of the new emerging smart materials, have been widely used to resolve this technical limitation. For example, an advanced engine mount was developed by using MRE to isolate the vibration transmitting from engines. In this paper, we will focus on rear cross member bushes, which is a key component for isolating the vibration from the road, and demonstrate their improved performance by utilizing MRE. The resonance frequency shift induced by the stiffness change of MRE will be presented through the frequency response functions estimated by simulation result.

Focusing the Sun: State Considerations for Designing Community Solar Policy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Jeffrey J; Shah, Monisha R

This report summarizes outcomes from the National Community Solar Partnership State Best Practices working group by identifying key differences in state policies that enable community solar and illustrating how various policy design approaches may impact the market. For the latter question, it is too early to quantify a relationship between policy design and market impacts, because most state programs have not been fully implemented. So, the authors conducted interviews with 19 subject matter experts, including project developers, regulators, and utilities to better understand how various policy design approaches may impact community solar markets. These perspectives, along with those gleaned frommore » the working group and relevant literature were synthesized to identify key considerations for policymakers designing community solar programs. Though state community solar policies vary in numerous ways, the report focuses on the following critical elements: program cap, project size cap, subscriber location requirements, subscriber eligibility requirements, low- and moderate-income stipulations, and subscriber compensation.« less

Calibration-free quantification of absolute oxygen saturation based on the dynamics of photoacoustic signals

PubMed Central

Xia, Jun; Danielli, Amos; Liu, Yan; Wang, Lidai; Maslov, Konstantin; Wang, Lihong V.

2014-01-01

Photoacoustic tomography (PAT) is a hybrid imaging technique that has broad preclinical and clinical applications. Based on the photoacoustic effect, PAT directly measures specific optical absorption, which is the product of the tissue-intrinsic optical absorption coefficient and the local optical fluence. Therefore, quantitative PAT, such as absolute oxygen saturation (sO2) quantification, requires knowledge of the local optical fluence, which can be estimated only through invasive measurements or sophisticated modeling of light transportation. In this work, we circumvent this requirement by taking advantage of the dynamics in sO2. The new method works when the sO2 transition can be simultaneously monitored with multiple wavelengths. For each wavelength, the ratio of photoacoustic amplitudes measured at different sO2 states is utilized. Using the ratio cancels the contribution from optical fluence and allows calibration-free quantification of absolute sO2. The new method was validated through both phantom and in vivo experiments. PMID:23903146

Systems evaluation of thermal bus concepts

NASA Technical Reports Server (NTRS)

Stalmach, D. D.

1982-01-01

Thermal bus concepts, to provide a centralized thermal utility for large, multihundred kilowatt space platforms, were studied and the results are summarized. Concepts were generated, defined, and screened for inclusion in system level thermal bus trades. Parametric trade studies were conducted in order to define the operational envelope, performance, and physical characteristics of each. Two concepts were selected as offering the most promise for thermal bus development. All of four concepts involved two phase flow in order to meet the required isothermal nature of the thermal bus. Two of the concepts employ a mechanical means to circulate the working fluid, a liquid pump in one case and a vapor compressor in another. Another concept utilizes direct osmosis as the driving force of the thermal bus. The fourth concept was a high capacity monogroove heat pipe. After preliminary sizing and screening, three of these concepts were selected to carry into the trade studies. The monogroove heat pipe concept was deemed unsuitable for further consideration because of its heat transport limitations. One additional concept utilizing capillary forces to drive the working fluid was added. Parametric system level trade studies were performed. Sizing and weight calculations were performed for thermal bus sizes ranging from 5 to 350 kW and operating temperatures in the range of 4 to 120 C. System level considerations such as heat rejection and electrical power penalties and interface temperature losses were included in the weight calculations.

Improving hearing health for farming families.

PubMed

Lower, Tony; Fragar, Lyn; Depcynzksi, Julie; Challinor, Kathy; Mills, Jan; Williams, Warwick

2010-01-01

Occupational noise injury and hearing loss are common features of agricultural workforces internationally. Farmsafe Australia has identified hearing health as one of its 4 key priority goals and targets. Currently, approximately 60-70% of Australian farmers have measurable hearing loss, compared with 27% of those in the general Australian community. This article describes the findings of a community based demonstration project to address hearing health issues conducted in the Australian state of New South Wales. This program sought to implement local demonstration projects in 3 communities to identify what works well in hearing health promotion with farmers and what could be applied more broadly throughout Australia. Local advisory groups were established in each community to guide project development and implementation. Project implementation focused on 3 major aspects: (1) increasing awareness of priority noise injury prevention and hearing health practices; (2) improving access to hearing health services; and (3) networking services in local communities. Area-specific training was undertaken for stakeholders to maximize local information links. Service utilization data were monitored and analysed. There was variability among sites; however in general there was an increased awareness of hearing health issues by farming families and expanded opportunities for farmers to access screening services. Utilization rates of hearing services also increased markedly in one community. Local hearing health networks were strengthened by linkages to key stakeholders outside the health sector. Previously unidentified methods of promoting hearing health (eg using agricultural retail outlets that supply hearing protection equipment and are accepted by farmers as an information source) were identified and utilized. Hearing health promotion with farmers in local communities can be enhanced through utilization and strengthening of local networks. Integration of hearing health initiatives with other agencies already working with farming families will be important in developing and enhancing long-term sustainable outcomes. Continued work at a national level to assist in stimulating local action will be required to build on the potential gains in reducing noise injury in the farming community.

A Framework for Creating Value from Fleet Data at Ecosystem Level

NASA Astrophysics Data System (ADS)

Kinnunen, Sini-Kaisu; Hanski, Jyri; Marttonen-Arola, Salla; Kärri, Timo

2017-09-01

As companies have recently gotten more interested in utilizing the increasingly gathered data and realizing the potential of data analysis, the ability to upgrade data into value for business has been recognized as an advantage. Companies gain competitive advantage if they are able to benefit from the fleet data that is produced both in and outside the boundaries of the company. Benefits of fleet management are based on the possibility to have access to the massive amounts of asset data that can then be utilized e.g. to gain cost savings and to develop products and services. The ambition of the companies is to create value from fleet data but this requires that different actors in ecosystem are working together for a common goal - to get the most value out of fleet data for the ecosystem. In order that this could be possible, we need a framework to meet the requirements of the fleet life-cycle data utilization. This means that the different actors in the ecosystem need to understand their role in the fleet data refining process in order to promote the value creation from fleet data. The objective of this paper is to develop a framework for knowledge management in order to create value from fleet data in ecosystems. As a result, we present a conceptual framework which helps companies to develop their asset management practices related to the fleet of assets.

Utilization of the Generalized Method of Cells to Analyze the Deformation Response of Laminated Ceramic Matrix Composites

NASA Technical Reports Server (NTRS)

Goldberg, Robert K.

2012-01-01

In order to practically utilize ceramic matrix composites in aircraft engine components, robust analysis tools are required that can simulate the material response in a computationally efficient manner. The MAC/GMC software developed at NASA Glenn Research Center, based on the Generalized Method of Cells micromechanics method, has the potential to meet this need. Utilizing MAC/GMC, the effective stiffness properties, proportional limit stress and ultimate strength can be predicted based on the properties and response of the individual constituents. In this paper, the effective stiffness and strength properties for a representative laminated ceramic matrix composite with a large diameter fiber are predicted for a variety of fiber orientation angles and laminate orientations. As part of the analytical study, methods to determine the in-situ stiffness and strength properties of the constituents required to appropriately simulate the effective composite response are developed. The stiffness properties of the representative composite have been adequately predicted for all of the fiber orientations and laminate configurations examined in this study. The proportional limit stresses and strains and ultimate stresses and strains were predicted with varying levels of accuracy, depending on the laminate orientation. However, for the cases where the predictions did not have the desired level of accuracy, the specific issues related to the micromechanics theory were identified which could lead to difficulties that were encountered that could be addressed in future work.

The Hippocampus Supports High-Resolution Binding in the Service of Perception, Working Memory and Long-Term Memory

PubMed Central

Yonelinas, Andrew P.

2013-01-01

It is well established that the hippocampus plays a critical role in our ability to recollect past events. A number of recent studies have indicated that the hippocampus may also play a critical role in working memory and perception, but these results have been highly controversial because other similar studies have failed to find evidence for hippocampal involvement. Thus, the precise role that the hippocampus plays in cognition is still debated. In the current paper, I propose that the hippocampus supports the generation and utilization of complex high-resolution bindings that link together the qualitative aspects that make up an event; these bindings are essential for recollection, and they can also contribute to performance across a variety of tasks including perception and working memory. An examination of the existing patient literature provides support for this proposal by showing that hippocampal damage leads to impairments on perception and working memory tasks that require complex high-resolution bindings. Conversely, hippocampal damage is much less likely to lead to impairments on tasks that require only low-resolution or simple associations/relations. The current proposal can be distinguished from earlier accounts of hippocampal function, and it generates a number of novel predictions that can be tested in future studies. PMID:23721964

A conceptual study of the potential for automotive-derived and free-piston Stirling engines in 30- to 400-kilowatt stationary power applications

NASA Technical Reports Server (NTRS)

Vatsky, A.; Chen, H. S.; Dineen, J.

1982-01-01

The technical feasibility of applying automotive-derived kinematic and free-piston Stirling engine concepts for stationary applications was explored. Automotive-derived engines offer cost advantages by providing a mature and developd engine technology base with downrating and parts commonality options for specific applications. Two engine sizes (30 and 400 kW), two Stirling engine configurations (kinematic and free-piston), and two output systems (crankshaft and hydraulic pump) were studied. The study includes the influences of using either hydrogen or helium as the working gas. The first kinematic configuration selects an existing Stirling engine design from an automotive application and adapts it to stationary requirements. A 50,000-hour life requirement was established by downrating the engine to 40 kW and reducing auxiliary loads. Efficiency improvements were gained by selective material and geometric variations and peak brake efficiency of 36.8 percent using helium gas was achieved. The second design was a four-cylinder, 400 kW engine, utilizing a new output drive system known as the z-crank, which provides lower friction losses and variable stroke power control. Three different material and working gas combinations were considered. Brake efficiency levels varied from 40.5 percent to 45.6 percent. A 37.5 kW single-cycle, free-piston hydraulic output design was generated by scaling one cylinder of the original automotive engine and mating it to a counterbalanced reciprocal hydraulic pump. Metallic diaphragms were utilized to transmit power.

A conceptual study of the potential for automotive-derived and free-piston Stirling engines in 30- to 400-kilowatt stationary power applications

NASA Astrophysics Data System (ADS)

Vatsky, A.; Chen, H. S.; Dineen, J.

1982-05-01

The technical feasibility of applying automotive-derived kinematic and free-piston Stirling engine concepts for stationary applications was explored. Automotive-derived engines offer cost advantages by providing a mature and developd engine technology base with downrating and parts commonality options for specific applications. Two engine sizes (30 and 400 kW), two Stirling engine configurations (kinematic and free-piston), and two output systems (crankshaft and hydraulic pump) were studied. The study includes the influences of using either hydrogen or helium as the working gas. The first kinematic configuration selects an existing Stirling engine design from an automotive application and adapts it to stationary requirements. A 50,000-hour life requirement was established by downrating the engine to 40 kW and reducing auxiliary loads. Efficiency improvements were gained by selective material and geometric variations and peak brake efficiency of 36.8 percent using helium gas was achieved. The second design was a four-cylinder, 400 kW engine, utilizing a new output drive system known as the z-crank, which provides lower friction losses and variable stroke power control. Three different material and working gas combinations were considered. Brake efficiency levels varied from 40.5 percent to 45.6 percent. A 37.5 kW single-cycle, free-piston hydraulic output design was generated by scaling one cylinder of the original automotive engine and mating it to a counterbalanced reciprocal hydraulic pump. Metallic diaphragms were utilized to transmit power.

Dissecting jets and missing energy searches using $n$-body extended simplified models

DOE PAGES

Cohen, Timothy; Dolan, Matthew J.; El Hedri, Sonia; ...

2016-08-04

Simplified Models are a useful way to characterize new physics scenarios for the LHC. Particle decays are often represented using non-renormalizable operators that involve the minimal number of fields required by symmetries. Generalizing to a wider class of decay operators allows one to model a variety of final states. This approach, which we dub the $n$-body extension of Simplified Models, provides a unifying treatment of the signal phase space resulting from a variety of signals. In this paper, we present the first application of this framework in the context of multijet plus missing energy searches. The main result of thismore » work is a global performance study with the goal of identifying which set of observables yields the best discriminating power against the largest Standard Model backgrounds for a wide range of signal jet multiplicities. Our analysis compares combinations of one, two and three variables, placing emphasis on the enhanced sensitivity gain resulting from non-trivial correlations. Utilizing boosted decision trees, we compare and classify the performance of missing energy, energy scale and energy structure observables. We demonstrate that including an observable from each of these three classes is required to achieve optimal performance. In conclusion, this work additionally serves to establish the utility of $n$-body extended Simplified Models as a diagnostic for unpacking the relative merits of different search strategies, thereby motivating their application to new physics signatures beyond jets and missing energy.« less

CCSDS File Delivery Protocol (CFDP): Why it's Useful and How it Works

NASA Technical Reports Server (NTRS)

Ray, Tim

2003-01-01

Reliable delivery of data products is often required across space links. For example, a NASA mission will require reliable delivery of images produced by an on-board detector. Many missions have their own (unique) way of accomplishing this, requiring custom software. Many missions also require manual operations (e.g. the telemetry receiver software keeps track of what data is missing, and a person manually inputs the appropriate commands to request retransmissions). The Consultative Committee for Space Data Systems (CCSDS) developed the CCSDS File Delivery Protocol (CFDP) specifically for this situation. CFDP is an international standard communication protocol that provides reliable delivery of data products. It is designed for use across space links. It will work well if run over the widely used CCSDS Telemetry and Telecommand protocols. However, it can be run over any protocol, and will work well as long as the underlying protocol delivers a reasonable portion of the data. The CFDP receiver will autonomously determine what data is missing, and request retransmissions as needed. The CFDP sender will autonomously perform the requested transmissions. When the entire data product is delivered, the CFDP receiver will let the CFDP sender know that the transaction has completed successfully. The result is that custom software becomes standard, and manual operations become autonomous. This paper will consider various ways of achieving reliable file delivery, explain why CFDP is the optimal choice for use over space links, explain how the core protocol works, and give some guidance on how to best utilize CFDP within various mission scenarios. It will also touch on additional features of CFDP, as well as other uses for CFDP (e.g. the loading of on-board memory and tables).

Optimizing signal output: effects of viscoelasticity and difference frequency on vibroacoustic radiation of tissue-mimicking phantoms

NASA Astrophysics Data System (ADS)

Namiri, Nikan K.; Maccabi, Ashkan; Bajwa, Neha; Badran, Karam W.; Taylor, Zachary D.; St. John, Maie A.; Grundfest, Warren S.; Saddik, George N.

2018-02-01

Vibroacoustography (VA) is an imaging technology that utilizes the acoustic response of tissues to a localized, low frequency radiation force to generate a spatially resolved, high contrast image. Previous studies have demonstrated the utility of VA for tissue identification and margin delineation in cancer tissues. However, the relationship between specimen viscoelasticity and vibroacoustic emission remains to be fully quantified. This work utilizes the effects of variable acoustic wave profiles on unique tissue-mimicking phantoms (TMPs) to maximize VA signal power according to tissue mechanical properties, particularly elasticity. A micro-indentation method was utilized to provide measurements of the elastic modulus for each biological replica. An inverse relationship was found between elastic modulus (E) and VA signal amplitude among homogeneous TMPs. Additionally, the difference frequency (Δf ) required to reach maximum VA signal correlated with specimen elastic modulus. Peak signal diminished with increasing Δf among the polyvinyl alcohol specimen, suggesting an inefficient vibroacoustic response by the specimen beyond a threshold of resonant Δf. Comparison of these measurements may provide additional information to improve tissue modeling, system characterization, as well as insights into the unique tissue composition of tumors in head and neck cancer patients.

Effect of laparoscopic surgery on health care utilization and costs in patients who undergo colectomy.

PubMed

Crawshaw, Benjamin P; Chien, Hung-Lun; Augestad, Knut M; Delaney, Conor P

2015-05-01

Laparoscopic colectomy is safe and effective in the treatment of many colorectal diseases. However, the effect of increasing use of laparoscopy on overall health care utilization and costs, especially in the long term, has not been thoroughly investigated. To evaluate the effect of laparoscopic vs open colectomy on short- and long-term health care utilization and costs. Retrospective multivariate regression analysis of national health insurance claims data was used to evaluate health care utilization and costs up to 1 year following elective colectomy. Data were obtained from the Truven Health Analytics MarketScan Commercial Claims and Encounters database. Patients aged 18 to 64 years who underwent elective laparoscopic or open colectomy from January 1, 2010, through December 31, 2010, were included. Patients with complex diagnoses that require increased non-surgery-related health care utilization, including malignant neoplasm, inflammatory bowel disease, human immunodeficiency virus, transplantation, and pregnancy, were excluded. Of 25 481 patients who underwent colectomy, 4160 were included in the study. Healthcare utilization, including office, hospital outpatient, and emergency department visits and inpatient services 90 and 365 days after the index procedure; total health care costs; and estimated days off from work owing to health care utilization. Of 25 481 patients who underwent colectomy, 4160 were included in the study (laparoscopic, 45.6%; open, 54.4%). The mean (SD) net and total payments were lower for laparoscopy ($23 064 [$14 558] and $24 196 [$14 507] vs $29 753 [$21 421] and $31 606 [$23 586]). In the first 90 days after surgery, an open approach was significantly associated with a 1.26-fold increase in health care costs (estimated, $1715; 95% CI, $338-$2853), increased use of heath care services, and more estimated days off from work (2.78 days; 95% CI, 1.93-3.59). Similar trends were found in the full postoperative year, with an estimated 1.18-fold increase (95% CI, 1.04-1.35) in health care expenditures and an increase of 1.15 times (95% CI, 1.08-1.23) the number of health care utilization days compared with laparoscopy. Laparoscopic colectomy results in a significant reduction in health care costs and utilization in the short- and long-term postoperative periods.

Can the reinforcing value of food be measured in bulimia nervosa?

PubMed

Schebendach, Janet; Broft, Allegra; Foltin, Richard W; Walsh, B Timothy

2013-03-01

Binge eating is a core clinical feature of bulimia nervosa (BN). Enhanced reinforcing value of food may play a role in this behavioral disturbance, but a systematic behavioral assessment of objective measures of the rewarding value of binge eating is lacking. The purpose of this study was to quantify the reinforcing value of food in BN patients as compared with normal controls. A progressive ratio (PR) computerized work task was completed under binge and non-binge instruction. The task consisted of 12 trials. The first trial required 50 keyboard taps to earn one portion of yogurt shake, and subsequent trials required progressive work increments of 200 taps for each additional portion. Completion of all 12 trials required 13,800 taps to earn 2100ml of shake. The breakpoint, defined as the largest ratio completed before a participant stopped working, was the measure of reinforcing efficacy. Ten patients and 10 controls completed the experiment. Under binge instruction, patients completed more trials and taps, and had a higher breakpoint than controls. The non-binge instruction yielded opposite findings; compared to controls, patients completed fewer trials and taps, and had a lower breakpoint. These results support the feasibility and potential utility of a PR task to quantify the reinforcing value of food in patients with BN. Copyright © 2012 Elsevier Ltd. All rights reserved.

The process of gas-dynamic design of pneumatic braking system using the baseline compressor

NASA Astrophysics Data System (ADS)

Novikova, Y.; Popov, G.; Goriachkin, E.; Baturin, O.; Zubanov, V.

2017-08-01

The article presents the results of work on the design of the air brake for testing of industrial gas turbine engines with free turbine. Designing of the air brake was performed on the basis of existing units using the program CFD - simulation Numeca FineTurbo. During the design the air brake arrangement was determined, which allows to utilize the required power to the shaft of the free turbine, increases stall margin of the air brake by waisting of the meridional flow channel. It was also made designing of the outlet guide vane to remove the residual twist. Unified nozzle also was designed to provide the air brake work at necessary points on the characteristic.

Planning for Space Station Freedom laboratory payload integration

NASA Technical Reports Server (NTRS)

Willenberg, Harvey J.; Torre, Larry P.

1989-01-01

Space Station Freedom is being developed to support extensive missions involving microgravity research and applications. Requirements for on-orbit payload integration and the simultaneous payload integration of multiple mission increments will provide the stimulus to develop new streamlined integration procedures in order to take advantage of the increased capabilities offered by Freedom. The United States Laboratory and its user accommodations are described. The process of integrating users' experiments and equipment into the United States Laboratory and the Pressurized Logistics Modules is described. This process includes the strategic and tactical phases of Space Station utilization planning. The support that the Work Package 01 Utilization office will provide to the users and hardware developers, in the form of Experiment Integration Engineers, early accommodation assessments, and physical integration of experiment equipment, is described. Plans for integrated payload analytical integration are also described.

Classification of superficial lesions of the eye with an optical biopsy system: First trials with the Los Alamos instrument

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glickman, R.D.; Gritz, D.C.; Held, K.S.

the clinical diagnosis of a lesion often requires that a histological analysis be made of a physical specimen of the suspect tissue. In the present work, the authors have utilized an optical biopsy system (OBS) developed at Los Alamos National Laboratory which is safe for patient use and provides a large amount of optical data from the sampled tissue. An earlier version of this system has been used to study age-related changes in the ocular lens (10). The purpose of the present study is to establish the potential clinical utility of the OBS by determining if characteristic features in themore » optical signatures, obtained from a variety of ophthalmic lesions, are correlated with the histological features of tissue biopsies obtained from these patients.« less

Audit of the Federal Energy Regulatory Commission`s Office of Chief Accountant

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-04-07

The Federal Energy Regulatory Commission`s (Commission) mission is to oversee America`s natural gas and oil pipeline transportation, electric utility, and hydroelectric power industries to ensure that consumers receive adequate energy supplies at just and reasonable rates. To carry out this mission, the Commission issues regulations covering the accounting, reporting, and rate-making requirements of the regulated utility companies. The Commission`s Office of Chief Accountant performs financial related audits at companies to ensure compliance with these regulations. The purpose of this audit was to evaluate the office of Chief Accountant`s audit performance. Specifically, the objectives were to determine if the most appropriatemore » audit approach was used and if a quality assurance process was in place to ensure reports were accurate and supported by the working papers.« less

Soft silicone rubber in phononic structures: Correct elastic moduli

NASA Astrophysics Data System (ADS)

Still, Tim; Oudich, M.; Auerhammer, G. K.; Vlassopoulos, D.; Djafari-Rouhani, B.; Fytas, G.; Sheng, P.

2013-09-01

We report on a combination of experiments to determine the elastic moduli of a soft poly (dimethylsiloxane) rubber that was utilized in a smart experiment on resonant phononic modes [Liu , ScienceSCIEAS0036-807510.1126/science.289.5485.1734 289, 1734 (2000)] and whose reported moduli became widely used as a model system in theoretical calculations of phononic materials. We found that the most peculiar hallmark of these values, an extremely low longitudinal sound velocity, is not supported by our experiments. Anyhow, performing theoretical band structure calculations, we can reproduce the surprising experimental findings of Liu even utilizing the correct mechanical parameters. Thus, the physical conclusions derived in the theoretical works do not require the use of an extremely low longitudinal velocity, but can be reproduced assuming only a low value of the shear modulus, in agreement with our experiments.

H2FIRST Reference Station Design Task: Project Deliverable 2-2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pratt, Joseph; Terlip, Danny; Ainscough, Chris

2015-04-20

This report presents near-term station cost results and discusses cost trends of different station types. It compares various vehicle rollout scenarios and projects realistic near-term station utilization values using the station infrastructure rollout in California as an example. It describes near-term market demands and matches those to cost-effective station concepts. Finally, the report contains detailed designs for five selected stations, which include piping and instrumentation diagrams, bills of materials, and several site-specific layout studies that incorporate the setbacks required by NFPA 2, the National Fire Protection Association Hydrogen Technologies Code. This work identified those setbacks as a significant factor affectingmore » the ability to site a hydrogen station, particularly liquid stations at existing gasoline stations. For all station types, utilization has a large influence on the financial viability of the station.« less

Sensor Transmission Power Schedule for Smart Grids

NASA Astrophysics Data System (ADS)

Gao, C.; Huang, Y. H.; Li, J.; Liu, X. D.

2017-11-01

Smart grid has attracted much attention by the requirement of new generation renewable energy. Nowadays, the real-time state estimation, with the help of phasor measurement unit, plays an important role to keep smart grid stable and efficient. However, the limitation of the communication channel is not considered by related work. Considering the familiar limited on-board batteries wireless sensor in smart grid, transmission power schedule is designed in this paper, which minimizes energy consumption with proper EKF filtering performance requirement constrain. Based on the event-triggered estimation theory, the filtering algorithm is also provided to utilize the information contained in the power schedule. Finally, its feasibility and performance is demonstrated using the standard IEEE 39-bus system with phasor measurement units (PMUs).

Space Station Freedom media handbook

NASA Technical Reports Server (NTRS)

1989-01-01

This handbook explains in lay terms, the work that is going on at the NASA Centers and contractors' plants in designing and developing the Space Station Freedom. It discusses the roles, responsibilities, and tasks required to build the Space Station Freedom's elements, systems, and components. New, required ground facilities are described, organized by NASA Center in order to provide a local angle for the media. Included are information on the historical perspective, international aspects, the utilization of the Space Station Freedom, a look at future possibilities, a description of the program, its management, program phases and milestones, and considerable information on the role of various NASA Centers, contractors and international partners. A list of abbreviations, a four-page glossary, and a list of NASA contacts are contained in the appendices.

Kinect the dots: 3D control of optical tweezers

NASA Astrophysics Data System (ADS)

Shaw, Lucy; Preece, Daryl; Rubinsztein-Dunlop, Halina

2013-07-01

Holographically generated optical traps confine micron- and sub-micron sized particles close to the center of focused light beams. They also provide a way of trapping multiple particles and moving them in three dimensions. However, in many systems the user interface is not always advantageous or intuitive especially for collaborative work and when depth information is required. We discuss and evaluate a set of multi-beam optical tweezers that utilize off the shelf gaming technology to facilitate user interaction. We use the Microsoft Kinect sensor bar as a way of getting the user input required to generate arbitrary optical force fields and control optically trapped particles. We demonstrate that the system can also be used for dynamic light control.

Utility company views of geothermal development

NASA Technical Reports Server (NTRS)

Hinrichs, T. C.

1974-01-01

The views of geothermal development from a utility company standpoint are presented. The impediments associated with such developments as required reliability and identification of risks are discussed. The utility industry historically is not a risk-taking industry. Support of rapid geothermal development by the utility industry requires identification and elimination of risks or absorption of the risks by other agencies. Suggestions as to the identification and minimization of risks are made.

Utilization of community pharmacy space to enhance privacy: a qualitative study.

PubMed

Hattingh, H Laetitia; Emmerton, Lynne; Ng Cheong Tin, Pascale; Green, Catherine

2016-10-01

Community pharmacists require access to consumers' information about their medicines and health-related conditions to make informed decisions regarding treatment options. Open communication between consumers and pharmacists is ideal although consumers are only likely to disclose relevant information if they feel that their privacy requirements are being acknowledged and adhered to. This study sets out to explore community pharmacy privacy practices, experiences and expectations and the utilization of available space to achieve privacy. Qualitative methods were used, comprising a series of face-to-face interviews with 25 pharmacists and 55 pharmacy customers in Perth, Western Australia, between June and August 2013. The use of private consultation areas for certain services and sensitive discussions was supported by pharmacists and consumers although there was recognition that workflow processes in some pharmacies may need to change to maximize the use of private areas. Pharmacy staff adopted various strategies to overcome privacy obstacles such as taking consumers to a quieter part of the pharmacy, avoiding exposure of sensitive items through packaging, lowering of voices, interacting during pharmacy quiet times and telephoning consumers. Pharmacy staff and consumers regularly had to apply judgement to achieve the required level of privacy. Management of privacy can be challenging in the community pharmacy environment, and on-going work in this area is important. As community pharmacy practice is increasingly becoming more involved in advanced medication and disease state management services with unique privacy requirements, pharmacies' layouts and systems to address privacy challenges require a proactive approach. © 2015 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

LESKO KF; BERRIOCHOA MV

2010-02-26

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installationmore » of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, "Management of Construction Projects, A Constructor's Perspective", University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by URS personnel. Each small contractor is mentored and supported utilizing the principles of the Construction Industry Institute (CII) Partnering process. Some of the key mentoring and partnering areas that are explored in this paper are, internal and external safety professional support, subcontractor safety teams and the interface with project and site safety teams, quality assurance program support to facilitate compliance with NQA-1, construction, team roles and responsibilities, work definition for successful fixed price contracts, scheduling and interface with project schedules and cost projection/accruals. The practical application of the CII Partnering principles, with the Construction Management expertise of URS, has led to a highly successful construction model that also meets small business contracting goals.« less

Finite Element Analysis of Reverberation Chambers

NASA Technical Reports Server (NTRS)

Bunting, Charles F.; Nguyen, Duc T.

2000-01-01

The primary motivating factor behind the initiation of this work was to provide a deterministic means of establishing the validity of the statistical methods that are recommended for the determination of fields that interact in -an avionics system. The application of finite element analysis to reverberation chambers is the initial step required to establish a reasonable course of inquiry in this particularly data-intensive study. The use of computational electromagnetics provides a high degree of control of the "experimental" parameters that can be utilized in a simulation of reverberating structures. As the work evolved there were four primary focus areas they are: 1. The eigenvalue problem for the source free problem. 2. The development of a complex efficient eigensolver. 3. The application of a source for the TE and TM fields for statistical characterization. 4. The examination of shielding effectiveness in a reverberating environment. One early purpose of this work was to establish the utility of finite element techniques in the development of an extended low frequency statistical model for reverberation phenomena. By employing finite element techniques, structures of arbitrary complexity can be analyzed due to the use of triangular shape functions in the spatial discretization. The effects of both frequency stirring and mechanical stirring are presented. It is suggested that for the low frequency operation the typical tuner size is inadequate to provide a sufficiently random field and that frequency stirring should be used. The results of the finite element analysis of the reverberation chamber illustrate io-W the potential utility of a 2D representation for enhancing the basic statistical characteristics of the chamber when operating in a low frequency regime. The basic field statistics are verified for frequency stirring over a wide range of frequencies. Mechanical stirring is shown to provide an effective frequency deviation.

A Tool for the Automated Collection of Space Utilization Data: Three Dimensional Space Utilization Monitor

NASA Technical Reports Server (NTRS)

Vos, Gordon A.; Fink, Patrick; Ngo, Phong H.; Morency, Richard; Simon, Cory; Williams, Robert E.; Perez, Lance C.

2015-01-01

Space Human Factors and Habitability (SHFH) Element within the Human Research Program (HRP), in collaboration with the Behavioral Health and Performance (BHP) Element, is conducting research regarding Net Habitable Volume (NHV), the internal volume within a spacecraft or habitat that is available to crew for required activities, as well as layout and accommodations within that volume. NASA is looking for innovative methods to unobtrusively collect NHV data without impacting crew time. Data required includes metrics such as location and orientation of crew, volume used to complete tasks, internal translation paths, flow of work, and task completion times. In less constrained environments methods for collecting such data exist yet many are obtrusive and require significant post-processing. Example technologies used in terrestrial settings include infrared (IR) retro-reflective marker based motion capture, GPS sensor tracking, inertial tracking, and multiple camera filmography. However due to constraints of space operations many such methods are infeasible, such as inertial tracking systems which typically rely upon a gravity vector to normalize sensor readings, and traditional IR systems which are large and require extensive calibration. However multiple technologies have not yet been applied to space operations for these explicit purposes. Two of these include 3-Dimensional Radio Frequency Identification Real-Time Localization Systems (3D RFID-RTLS) and depth imaging systems which allow for 3D motion capture and volumetric scanning (such as those using IR-depth cameras like the Microsoft Kinect or Light Detection and Ranging / Light-Radar systems, referred to as LIDAR).

Altimetric system: Earth observing system. Volume 2h: Panel report

NASA Technical Reports Server (NTRS)

Bindschadler, Robert A.; Born, George; Chase, Robert R. P.; Fu, Lee-Lueng; Mouginis-Mark, Peter; Parsons, Chester; Tapley, Byron

1987-01-01

A rationale and recommendations for planning, implementing, and operating an altimetric system aboard the Earth observing system (Eos) spacecraft is provided. In keeping with the recommendations of the Eos Science and Mission Requirements Working Group, a complete altimetric system is defined that is capable of perpetuating the data set to be derived from TOPEX/Poseidon, enabling key scientific questions to be addressed. Since the scientific utility and technical maturity of spaceborne radar altimeters is well documented, the discussion is limited to highlighting those Eos-specific considerations that materially impact upon radar altimetric measurements.

Creating protective appliances for preventing dental injury during endotracheal intubation using intraoral scanning and 3D printing: a technical note

PubMed Central

Cho, Jin-Hyung; Park, Wonse; Park, Kyeong-Mee; Kim, Seo-Yul

2017-01-01

Digital dentistry has influenced many dental procedures, such as three-dimensional (3D) diagnosis and treatment planning, surgical splints, and prosthetic treatments. Patient-specific protective appliances (PSPAs) prevent dental injury during endotracheal intubation. However, the required laboratory work takes time, and there is the possibility of tooth extraction while obtaining the dental impression. In this technical report, we utilized new digital technology for creating PSPAs, using direct intraoral scanners and 3D printers for dental cast fabrication. PMID:28879329

Creating protective appliances for preventing dental injury during endotracheal intubation using intraoral scanning and 3D printing: a technical note.

PubMed

Cho, Jin-Hyung; Park, Wonse; Park, Kyeong-Mee; Kim, Seo-Yul; Kim, Kee-Deog

2017-03-01

Digital dentistry has influenced many dental procedures, such as three-dimensional (3D) diagnosis and treatment planning, surgical splints, and prosthetic treatments. Patient-specific protective appliances (PSPAs) prevent dental injury during endotracheal intubation. However, the required laboratory work takes time, and there is the possibility of tooth extraction while obtaining the dental impression. In this technical report, we utilized new digital technology for creating PSPAs, using direct intraoral scanners and 3D printers for dental cast fabrication.

The Marine Resources Experiment Program (MAREX)

NASA Technical Reports Server (NTRS)

1982-01-01

The Satellite Ocean Color Science Working Group was established to consider the scientific utility of repeated satellite measurements of ocean color, especially for measuring global ocean chlorophyll and for studying the fate of global primary productivity in the sea. Results of the group's deliberations are presented. The scientific requirements are given for ocean color data from a CZCS follow on sensor in order to address global primary productivity, fishery, and carbon storage problems. Some specific experiments, called the marine resource experiment and designed to determine critical nutrient fluxes, photosynthetic rates, and primary productivity and biomass, are outlined.

Water inlet blowdown

NASA Astrophysics Data System (ADS)

Timar, T.

1981-09-01

A new blowdown system was developed for cleaning debris from the inlet grill of waterjet propulsion system on Boeing hydrofoil boats. A system was required to work with existing waterjet ducts which are open ended. The new blowdown system consists of an abrupt discharge of high pressure compressed air amidst the water inlet duct. It utilizes the open end of the propulsor discharge nozzle as a safety valve. Feasibility was proven by semi-steady state equations and was confirmed by full scale testing. A system was developed and installed and is now fully operational.

Exercise-training protocols for astronauts in microgravity

NASA Technical Reports Server (NTRS)

Greenleaf, J. E.; Bulbulian, R.; Bernauer, E. M.; Haskell, W. L.; Moore, T.

1989-01-01

Based on physical working requirements for astronauts during intra- and extravehicular activity and on the findings from bed-rest studies that utilized exercise training as a countermeasure for the reduction of aerobic power, deterioration of muscular strength and endurance, decrements in mood and cognitive performance, and possibly for bone loss, two exercise protocols are proposed. One assumes that, during microgravity, astronaut exercise physiological functions should be maintained at 100 percent of ground-based levels. The other assumes that maximal aerobic power in flight can be reduced by 10 percent of the ground-based level.

TIGER: A graphically interactive grid system for turbomachinery applications

NASA Technical Reports Server (NTRS)

Shih, Ming-Hsin; Soni, Bharat K.

1992-01-01

Numerical grid generation algorithm associated with the flow field about turbomachinery geometries is presented. Graphical user interface is developed with FORMS Library to create an interactive, user-friendly working environment. This customized algorithm reduces the man-hours required to generate a grid associated with turbomachinery geometry, as compared to the use of general-purpose grid generation softwares. Bezier curves are utilized both interactively and automatically to accomplish grid line smoothness and orthogonality. Graphical User Interactions are provided in the algorithm, allowing the user to design and manipulate the grid lines with a mouse.

A work-centered cognitively based architecture for decision support: the work-centered infomediary layer (WIL) model

NASA Astrophysics Data System (ADS)

Zachary, Wayne; Eggleston, Robert; Donmoyer, Jason; Schremmer, Serge

2003-09-01

Decision-making is strongly shaped and influenced by the work context in which decisions are embedded. This suggests that decision support needs to be anchored by a model (implicit or explicit) of the work process, in contrast to traditional approaches that anchor decision support to either context free decision models (e.g., utility theory) or to detailed models of the external (e.g., battlespace) environment. An architecture for cognitively-based, work centered decision support called the Work-centered Informediary Layer (WIL) is presented. WIL separates decision support into three overall processes that build and dynamically maintain an explicit context model, use the context model to identify opportunities for decision support and tailor generic decision-support strategies to the current context and offer them to the system-user/decision-maker. The generic decision support strategies include such things as activity/attention aiding, decision process structuring, work performance support (selective, contextual automation), explanation/ elaboration, infosphere data retrieval, and what if/action-projection and visualization. A WIL-based application is a work-centered decision support layer that provides active support without intent inferencing, and that is cognitively based without requiring classical cognitive task analyses. Example WIL applications are detailed and discussed.

Narrative ideas for consulting with communities and organizations: ripples from the gatherings.

PubMed

Freedman, Jill; Combs, Gene

2009-09-01

This paper reviews Michael White's early work with communities and extends ideas and practices from that work into the realm of consulting with organizations. We draw on Michael's writing and the records of two specific projects, as well as the recollections of team members in those projects, to describe how ideas and practices that were originally developed in working with individuals and families came to be applied in community settings. Specifically, we show how the central intention of the work is to use narrative ideas and practices in ways that allow communities to articulate, appreciate, document, utilize, and share their own knowledges of life and skills of living. We discuss the basic narrative ideas of stories, double listening, telling and retelling, making documents, and linking lives through shared purposes. For these projects, the teams developed structures that made it possible to use the basic idea with whole communities. We show how this work with communities has offered inspiration and ideas for our work in consulting to organizations. Finally, we describe and illustrate a particular way of working with organizations that carries the spirit of Michael's community work into situations requiring shorter blocks of time and more limited commitments than the original community contexts.

Design strategies from sexual exploitation and sex work studies among women and girls: Methodological considerations in a hidden and vulnerable population.

PubMed

Gerassi, Lara; Edmond, Tonya; Nichols, Andrea

2017-06-01

The study of sex trafficking, prostitution, sex work, and sexual exploitation is associated with many methodological issues and challenges. Researchers' study designs must consider the many safety issues related to this vulnerable and hidden population. Community advisory boards and key stakeholder involvement are essential to study design to increase safety of participants, usefulness of study aims, and meaningfulness of conclusions. Nonrandomized sampling strategies are most often utilized when studying exploited women and girls, which have the capacity to provide rich data and require complex sampling and recruitment methods. This article reviews the current methodological issues when studying this marginalized population as well as strategies to address challenges while working with the community in order to bring about social change. The authors also discuss their own experiences in collaborating with community organizations to conduct research in this field.

Design strategies from sexual exploitation and sex work studies among women and girls: Methodological considerations in a hidden and vulnerable population

PubMed Central

Gerassi, Lara; Edmond, Tonya; Nichols, Andrea

2016-01-01

The study of sex trafficking, prostitution, sex work, and sexual exploitation is associated with many methodological issues and challenges. Researchers’ study designs must consider the many safety issues related to this vulnerable and hidden population. Community advisory boards and key stakeholder involvement are essential to study design to increase safety of participants, usefulness of study aims, and meaningfulness of conclusions. Nonrandomized sampling strategies are most often utilized when studying exploited women and girls, which have the capacity to provide rich data and require complex sampling and recruitment methods. This article reviews the current methodological issues when studying this marginalized population as well as strategies to address challenges while working with the community in order to bring about social change. The authors also discuss their own experiences in collaborating with community organizations to conduct research in this field. PMID:28824337

In Respect to the Cognitive Load Theory: Adjusting Instructional Guidance with Student Expertise.

PubMed

Schilling, Jim

2017-01-01

The amount of guidance supplied by educators to students in allied health programs is a factor in student learning. According to the cognitive load theory of learning, without adequate instructional support, novice learners will be overwhelmed and unable to store information, while unnecessary guidance supplied to advanced students will cause extraneous cognitive load on the working memory system. Adjusting instructional guidance for students according to their level of expertise to minimize extraneous cognitive load and optimize working memory storage capacity will enhance learning effectiveness. Novice students presented with complex subject matter require significant guidance during the initial stages, using strategies such as worked examples. As students comprehend information, instructional guidance needs to gradually fade to avoid elevated extraneous cognitive load from the expertise reversal effect. An instructional strategy that utilizes a systemic (fixed) or adjustable (adaptive) tapering of guidance to students in allied health programs depending on their expertise will optimize learning capability.

Mechanization for Optimal Landscape Reclamation

NASA Astrophysics Data System (ADS)

Vondráčková, Terezie; Voštová, Věra; Kraus, Michal

2017-12-01

Reclamation is a method of ultimate utilization of land adversely affected by mining or other industrial activity. The paper explains the types of reclamation and the term “optimal reclamation”. Technological options of the long-lasting process of mine dumps reclamation starting with the removal of overlying rocks, transport and backfilling up to the follow-up remodelling of the mine dumps terrain. Technological units and equipment for stripping flow division. Stripping flow solution with respect to optimal reclamation. We recommend that the application of logistic chains and mining simulation with follow-up reclamation to open-pit mines be used for the implementation of optimal reclamation. In addition to a database of local heterogeneities of the stripped soil and reclaimed land, the flow of earths should be resolved in a manner allowing the most suitable soil substrate to be created for the restoration of agricultural and forest land on mine dumps. The methodology under development for the solution of a number of problems, including the geological survey of overlying rocks, extraction of stripping, their transport and backfilling in specified locations with the follow-up deployment of goal-directed reclamation. It will make possible to reduce the financial resources needed for the complex process chain by utilizing GIS, GPS and DGPS technologies, logistic tools and synergistic effects. When selecting machines for transport, moving and spreading of earths, various points of view and aspects must be taken into account. Among such aspects are e.g. the kind of earth to be operated by the respective construction machine, the kind of work activities to be performed, the machine’s capacity, the option to control the machine’s implement and economic aspects and clients’ requirements. All these points of view must be considered in the decision-making process so that the selected machine is capable of executing the required activity and that the use of an unsuitable machine is eliminated as it would result in a delay and increase in the project costs. Therefore, reclamation always includes extensive earth-moving work activities restoring the required relief of the land being reclaimed. Using the earth-moving machine capacity, the kind of soil in mine dumps, the kind of the work activity performed and the machine design, a SW application has been developed that allows the most suitable machine for the respective work technology to be selected with a view to preparing the land intended for reclamation.

42 CFR 456.200 - Scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ASSISTANCE PROGRAMS UTILIZATION CONTROL Utilization Control: Mental Hospitals Utilization Review (ur) Plan... requirements for a written utilization review (UR) plan for each mental hospital providing Medicaid services...

Electric utility companies and geothermal power

NASA Technical Reports Server (NTRS)

Pivirotto, D. S.

1976-01-01

The requirements of the electric utility industry as the primary potential market for geothermal energy are analyzed, based on a series of structured interviews with utility companies and financial institution executives. The interviews were designed to determine what information and technologies would be required before utilities would make investment decisions in favor of geothermal energy, the time frame in which the information and technologies would have to be available, and the influence of the governmental politics. The paper describes the geothermal resources, electric utility industry, its structure, the forces influencing utility companies, and their relationship to geothermal energy. A strategy for federal stimulation of utility investment in geothermal energy is suggested. Possibilities are discussed for stimulating utility investment through financial incentives, amelioration of institutional barriers, and technological improvements.

Do rheumatologists recognize their patients' work-related problems?

PubMed

Gilworth, G; Haigh, R; Tennant, A; Chamberlain, M A; Harvey, A R

2001-11-01

The question addressed in this pilot study was 'Does the addition of an occupational health physiotherapist offering early vocational assessment influence the management of rheumatology patients (clinically and related to the workplace)?' Sequential vocational assessments were offered to 78 subjects with rheumatological complaints of more than 1 yr duration experiencing difficulties in working. The findings from the vocational assessments were fed back to rheumatologists. Where necessary and acceptable, workplace interventions were made and the Employment Service's Access to Work scheme was utilized to address the employment problems found. The intervention vocational assessments trebled the number of subjects seeing a Disability Employment Adviser (17% before the study, a further 37% during it). High levels of satisfaction were reported for interventions made at work. Some important changes to the management of some patients by a few doctors were made, but information from the vocational assessments did not reach them reliably in a number of cases. An unmet need for advice and workplace aids and equipment was identified. Vocational assessment by a practitioner with clinical knowledge, ergonomic and workplace experience proved helpful to patients in this pilot study. Without vocational assessment, the hospital-based team rarely identified what were often remediable, work problems and appeared unaware of the appropriate referral route for this group of patients. Rheumatologists may need to expand their management to include consideration of work issues to ensure that their patients are referred early for appropriate ergonomic intervention when required. Further study is required to help facilitate easy identification in the clinical setting of patients with problems at work.

Working on the Work Framework for Engagement: Impacting Students' Perceived Learning, Attitudes toward School, and Achievement

ERIC Educational Resources Information Center

Forehand, Michael Joshua

2014-01-01

A quasi-experimental, pre-test post-test nonequivalent control group study was utilized to determine the difference in students' perceived learning, attitudes toward school, and achievement when participating in classes utilizing engagement design qualities as compared to students in classes not utilizing engagement design qualities. To inform the…

Work-Life Benefits and Organizational Attachment: Self-Interest Utility and Signaling Theory Models

ERIC Educational Resources Information Center

Casper, Wendy J.; Harris, Christopher M.

2008-01-01

This study examines two competing theoretical explanations for why work-life policies such as dependent care assistance and flexible schedules influence organizational attachment. The self-interest utility model posits that work-life policies influence organizational attachment because employee use of these policies facilitates attachment. The…

Health Outcomes and Costs of Social Work Services: A Systematic Review.

PubMed

Steketee, Gail; Ross, Abigail M; Wachman, Madeline K

2017-12-01

Efforts to reduce expensive health service utilization, contain costs, improve health outcomes, and address the social determinants of health require research that demonstrates the economic value of health services in population health across a variety of settings. Social workers are an integral part of the US health care system, yet the specific contributions of social work to health and cost-containment outcomes are unknown. The social work profession's person-in-environment framework and unique skillset, particularly around addressing social determinants of health, hold promise for improving health and cost outcomes. To systematically review international studies of the effect of social work-involved health services on health and economic outcomes. We searched 4 databases (PubMed, PsycINFO, CINAHL, Social Science Citation Index) by using "social work" AND "cost" and "health" for trials published from 1990 to 2017. Abstract review was followed by full-text review of all studies meeting inclusion criteria (social work services, physical health, and cost outcomes). Of the 831 abstracts found, 51 (6.1%) met criteria. Full text review yielded 16 studies involving more than 16 000 participants, including pregnant and pediatric patients, vulnerable low-income adults, and geriatric patients. We examined study quality, health and utilization outcomes, and cost outcomes. Average study quality was fair. Studies of 7 social work-led services scored higher on quality ratings than 9 studies of social workers as team members. Most studies showed positive effects on health and service utilization; cost-savings were consistent across nearly all studies. Despite positive overall effects on outcomes, variability in study methods, health problems, and cost analyses render generalizations difficult. Controlled hypothesis-driven trials are needed to examine the health and cost effects of specific services delivered by social workers independently and through interprofessional team-based care. Public Health Implications. The economic and health benefits reported in these studies suggest that the broad health perspective taken by the social work profession for patient, personal, and environmental needs may be particularly valuable for achieving goals of cost containment, prevention, and population health. Novel approaches that move beyond cost savings to articulate the specific value-added of social work are much needed. As health service delivery focuses increasingly on interprofessional training, practice, and integrated care, more research testing the impact of social work prevention and intervention efforts on the health and well-being of vulnerable populations while also measuring societal costs and benefits is essential.

Interface Management for a NASA Flight Project Using Model-Based Systems Engineering (MBSE)

NASA Technical Reports Server (NTRS)

Vipavetz, Kevin; Shull, Thomas A.; Infeld, Samatha; Price, Jim

2016-01-01

The goal of interface management is to identify, define, control, and verify interfaces; ensure compatibility; provide an efficient system development; be on time and within budget; while meeting stakeholder requirements. This paper will present a successful seven-step approach to interface management used in several NASA flight projects. The seven-step approach using Model Based Systems Engineering will be illustrated by interface examples from the Materials International Space Station Experiment-X (MISSE-X) project. The MISSE-X was being developed as an International Space Station (ISS) external platform for space environmental studies, designed to advance the technology readiness of materials and devices critical for future space exploration. Emphasis will be given to best practices covering key areas such as interface definition, writing good interface requirements, utilizing interface working groups, developing and controlling interface documents, handling interface agreements, the use of shadow documents, the importance of interface requirement ownership, interface verification, and product transition.

Semantic technologies in a decision support system

NASA Astrophysics Data System (ADS)

Wasielewska, K.; Ganzha, M.; Paprzycki, M.; Bǎdicǎ, C.; Ivanovic, M.; Lirkov, I.

2015-10-01

The aim of our work is to design a decision support system based on ontological representation of domain(s) and semantic technologies. Specifically, we consider the case when Grid / Cloud user describes his/her requirements regarding a "resource" as a class expression from an ontology, while the instances of (the same) ontology represent available resources. The goal is to help the user to find the best option with respect to his/her requirements, while remembering that user's knowledge may be "limited." In this context, we discuss multiple approaches based on semantic data processing, which involve different "forms" of user interaction with the system. Specifically, we consider: (a) ontological matchmaking based on SPARQL queries and class expression, (b) graph-based semantic closeness of instances representing user requirements (constructed from the class expression) and available resources, and (c) multicriterial analysis based on the AHP method, which utilizes expert domain knowledge (also ontologically represented).

Clinical social work roles in an integrative, interdisciplinary team: enhancing parental compliance.

PubMed

Terry, P O

1981-01-01

This paper is directed toward those attempting to develop effective social work functions within an interdisciplinary treatment team and utilizes a specialized group as a demonstration model. The Inborn Errors of Metabolism Team at the University of Tennessee Child Development Center deals with children whose genetic disorders require precise dietary management for the prevention of various handicapping conditions including mental retardation. Representatives of the six disciplines forming the core team recognize that professional interdependence must combine with parental cooperation if the program is to succeed. The clinical social worker is a permanent member of the team and focuses on the family during the years each child is followed. Social work roles are multiple and include those of crisis interventionist, family therapist, marriage counselor, patient advocate, and team interpreter. Such social work involvement is essential in the holistic approach to long-term patient care which recognizes that no disorder exists apart from the patient, nor the patient from his family.

Development of a HTSMA-Actuated Surge Control Rod for High-Temperature Turbomachinery Applications

NASA Technical Reports Server (NTRS)

Padula, Santo, II; Noebe, Ronald; Bigelow, Glen; Culley, Dennis; Stevens, Mark; Penney, Nicholas; Gaydosh, Darrell; Quackenbush, Todd; Carpenter, Bernie

2007-01-01

In recent years, a demand for compact, lightweight, solid-state actuation systems has emerged, driven in part by the needs of the aeronautics industry. However, most actuation systems used in turbomachinery require not only elevated temperature but high-force capability. As a result, shape memory alloy (SMA) based systems have worked their way to the forefront of a short list of viable options to meet such a technological challenge. Most of the effort centered on shape memory systems to date has involved binary NiTi alloys but the working temperatures required in many aeronautics applications dictate significantly higher transformation temperatures than the binary systems can provide. Hence, a high temperature shape memory alloy (HTSMA) based on NiTiPdPt, having a transformation temperature near 300 C, was developed. Various thermo-mechanical processing schemes were utilized to further improve the dimensional stability of the alloy and it was later extruded/drawn into wire form to be more compatible with envisioned applications. Mechanical testing on the finished wire form showed reasonable work output capability with excellent dimensional stability. Subsequently, the wire form of the alloy was incorporated into a benchtop system, which was shown to provide the necessary stroke requirements of approx.0.125 inches for the targeted surge-control application. Cycle times for the actuator were limited to 4 seconds due to control and cooling constraints but this cycle time was determined to be adequate for the surge control application targeted as the primary requirement was initial actuation of a surge control rod, which could be completed in approximately one second.

Construction of an alternative glycerol-utilization pathway for improved β-carotene production in Escherichia coli.

PubMed

Guo, Jin-Ying; Hu, Kun-Le; Bi, Chang-Hao; Li, Qing-Yan; Zhang, Xue-Li

2018-05-11

Glycerol, which is an inevitable by-product of biodiesel production, is an ideal carbon source for the production of carotenoids due to its low price, good availability and chemically reduced status, which results in a low requirement for additional reducing equivalents. In this study, an alternative carbon-utilization pathway was constructed in Escherichia coli to enable more efficient β-carotene production from glycerol. An aldehyde reductase gene (alrd) and an aldehyde dehydrogenase gene (aldH) from Ralstonia eutropha H16 were integrated into the E. coli chromosome to form a novel glycerol-utilization pathway. The β-carotene specific production value was increased by 50% after the introduction of alrd and aldH. It was found that the glycerol kinase gene (garK), alrd and aldH were the bottleneck of the alternative glycerol metabolic pathway, and modulation of garK gene with an mRS library further increased the β-carotene specific production value by 13%. Finally, co-modulation of genes in the introduced aldH-alrd operon led to 86% more of β-carotene specific production value than that of the strain without the alternative glycerol-utilization pathway and the glycerol-utilization rate was also increased. In this work, β-carotene production of E. coli was significantly improved by constructing and optimizing an alternative glycerol-utilization pathway. This strategy can potentially be used to improve the production of other isoprenoids using glycerol as a cheap and abundant substrate, and therefore has industrial relevance.

Efficient Discovery of De-identification Policies Through a Risk-Utility Frontier

PubMed Central

Xia, Weiyi; Heatherly, Raymond; Ding, Xiaofeng; Li, Jiuyong; Malin, Bradley

2014-01-01

Modern information technologies enable organizations to capture large quantities of person-specific data while providing routine services. Many organizations hope, or are legally required, to share such data for secondary purposes (e.g., validation of research findings) in a de-identified manner. In previous work, it was shown de-identification policy alternatives could be modeled on a lattice, which could be searched for policies that met a prespecified risk threshold (e.g., likelihood of re-identification). However, the search was limited in several ways. First, its definition of utility was syntactic - based on the level of the lattice - and not semantic - based on the actual changes induced in the resulting data. Second, the threshold may not be known in advance. The goal of this work is to build the optimal set of policies that trade-off between privacy risk (R) and utility (U), which we refer to as a R-U frontier. To model this problem, we introduce a semantic definition of utility, based on information theory, that is compatible with the lattice representation of policies. To solve the problem, we initially build a set of policies that define a frontier. We then use a probability-guided heuristic to search the lattice for policies likely to update the frontier. To demonstrate the effectiveness of our approach, we perform an empirical analysis with the Adult dataset of the UCI Machine Learning Repository. We show that our approach can construct a frontier closer to optimal than competitive approaches by searching a smaller number of policies. In addition, we show that a frequently followed de-identification policy (i.e., the Safe Harbor standard of the HIPAA Privacy Rule) is suboptimal in comparison to the frontier discovered by our approach. PMID:25520961

Efficient Discovery of De-identification Policies Through a Risk-Utility Frontier.

PubMed

Xia, Weiyi; Heatherly, Raymond; Ding, Xiaofeng; Li, Jiuyong; Malin, Bradley

2013-01-01

Modern information technologies enable organizations to capture large quantities of person-specific data while providing routine services. Many organizations hope, or are legally required, to share such data for secondary purposes (e.g., validation of research findings) in a de-identified manner. In previous work, it was shown de-identification policy alternatives could be modeled on a lattice, which could be searched for policies that met a prespecified risk threshold (e.g., likelihood of re-identification). However, the search was limited in several ways. First, its definition of utility was syntactic - based on the level of the lattice - and not semantic - based on the actual changes induced in the resulting data. Second, the threshold may not be known in advance. The goal of this work is to build the optimal set of policies that trade-off between privacy risk (R) and utility (U), which we refer to as a R-U frontier. To model this problem, we introduce a semantic definition of utility, based on information theory, that is compatible with the lattice representation of policies. To solve the problem, we initially build a set of policies that define a frontier. We then use a probability-guided heuristic to search the lattice for policies likely to update the frontier. To demonstrate the effectiveness of our approach, we perform an empirical analysis with the Adult dataset of the UCI Machine Learning Repository. We show that our approach can construct a frontier closer to optimal than competitive approaches by searching a smaller number of policies. In addition, we show that a frequently followed de-identification policy (i.e., the Safe Harbor standard of the HIPAA Privacy Rule) is suboptimal in comparison to the frontier discovered by our approach.

Stakeholder needs for ground penetrating radar utility location

NASA Astrophysics Data System (ADS)

Thomas, A. M.; Rogers, C. D. F.; Chapman, D. N.; Metje, N.; Castle, J.

2009-04-01

In the UK alone there are millions of miles of underground utilities with often inaccurate, incomplete, or non-existent location records that cause significant health and safety problems for maintenance personnel, together with the potential for large, unnecessary, social and financial costs for their upkeep and repair. This has led to increasing use of Ground Penetrating Radar (GPR) for utility location, but without detailed consideration of the degree of location accuracy required by stakeholders — i.e. all those directly involved in streetworks ranging from utility owners to contractors and surveyors and government departments. In order to ensure that stakeholder requirements are incorporated into a major new UK study, entitled Mapping the Underworld, a questionnaire has been used to determine the current and future utility location accuracy requirements. The resulting data indicate that stakeholders generally require location tolerances better than 100 mm at depths usually extending down to 3 m, and more occasionally to 5 m, below surface level, providing significant challenges to GPR if their needs are to be met in all ground conditions. As well as providing much useful data on stakeholder needs, these data are also providing a methodology for assessment of GPR utility location in terms of the factor most important to them — the degree to which the equipment provides location within their own accuracy requirements.

compomics-utilities: an open-source Java library for computational proteomics.

PubMed

Barsnes, Harald; Vaudel, Marc; Colaert, Niklaas; Helsens, Kenny; Sickmann, Albert; Berven, Frode S; Martens, Lennart

2011-03-08

The growing interest in the field of proteomics has increased the demand for software tools and applications that process and analyze the resulting data. And even though the purpose of these tools can vary significantly, they usually share a basic set of features, including the handling of protein and peptide sequences, the visualization of (and interaction with) spectra and chromatograms, and the parsing of results from various proteomics search engines. Developers typically spend considerable time and effort implementing these support structures, which detracts from working on the novel aspects of their tool. In order to simplify the development of proteomics tools, we have implemented an open-source support library for computational proteomics, called compomics-utilities. The library contains a broad set of features required for reading, parsing, and analyzing proteomics data. compomics-utilities is already used by a long list of existing software, ensuring library stability and continued support and development. As a user-friendly, well-documented and open-source library, compomics-utilities greatly simplifies the implementation of the basic features needed in most proteomics tools. Implemented in 100% Java, compomics-utilities is fully portable across platforms and architectures. Our library thus allows the developers to focus on the novel aspects of their tools, rather than on the basic functions, which can contribute substantially to faster development, and better tools for proteomics.

In situ bioremediation of petroleum hydrocarbons and chlorinated hydrocarbons: Three case studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bost, R.C.; Perry, R.G.; Barber, T.

1997-06-01

In situ biodegradation of organic contaminants is one of the most cost-effective means of site remediation. This method has proven successful in soils, ground water, and slurries. Bacteria capable of degrading organic contaminants within an aquifer include many species from a wide spectrum of genera, e.g. Pseudomonas, Corynebacterium, Bacillus, etc. In most cases, a mixture of bacterial strains is required to completely oxidize a complex organic contaminant. Each strain of an organism may target a specific compound, working together with other organisms to ultimately degrade each intermediate until complete degradation, also known as mineralization, occurs. One or more of themore » following mechanisms are utilized by bacteria for organic chemical degradation: (1) aerobic, (2) anaerobic, and (3) co-metabolic. During aerobic oxidation of organic chemicals, bacteria utilize the pollutant as an electron and hydrogen source and oxygen acts as the electron and hydrogen acceptor, resulting in water. As the bacterial enzymes cleave the compound, oxidized products are produced along with energy for the reaction to proceed. This is the most rapid and widely utilized mechanism. Dehalogenation occurs under aerobic, or perhaps more often, under anoxic conditions. This process occurs in the presence of alternate electron acceptors and replaces chlorine with hydrogen. The mechanism of co-metabolism can be aerobic or anaerobic, but is more often aerobic. This process requires a separate energy source for the bacterial cell because the pollutant is not utilized as an energy source. The role of bioremediation in site remediation is demonstrated below by three case studies: (1) a refinery, (2) a municipal landfill and (3) a pesticide formulation plant.« less

An integrated SNP mining and utilization (ISMU) pipeline for next generation sequencing data.

PubMed

Azam, Sarwar; Rathore, Abhishek; Shah, Trushar M; Telluri, Mohan; Amindala, BhanuPrakash; Ruperao, Pradeep; Katta, Mohan A V S K; Varshney, Rajeev K

2014-01-01

Open source single nucleotide polymorphism (SNP) discovery pipelines for next generation sequencing data commonly requires working knowledge of command line interface, massive computational resources and expertise which is a daunting task for biologists. Further, the SNP information generated may not be readily used for downstream processes such as genotyping. Hence, a comprehensive pipeline has been developed by integrating several open source next generation sequencing (NGS) tools along with a graphical user interface called Integrated SNP Mining and Utilization (ISMU) for SNP discovery and their utilization by developing genotyping assays. The pipeline features functionalities such as pre-processing of raw data, integration of open source alignment tools (Bowtie2, BWA, Maq, NovoAlign and SOAP2), SNP prediction (SAMtools/SOAPsnp/CNS2snp and CbCC) methods and interfaces for developing genotyping assays. The pipeline outputs a list of high quality SNPs between all pairwise combinations of genotypes analyzed, in addition to the reference genome/sequence. Visualization tools (Tablet and Flapjack) integrated into the pipeline enable inspection of the alignment and errors, if any. The pipeline also provides a confidence score or polymorphism information content value with flanking sequences for identified SNPs in standard format required for developing marker genotyping (KASP and Golden Gate) assays. The pipeline enables users to process a range of NGS datasets such as whole genome re-sequencing, restriction site associated DNA sequencing and transcriptome sequencing data at a fast speed. The pipeline is very useful for plant genetics and breeding community with no computational expertise in order to discover SNPs and utilize in genomics, genetics and breeding studies. The pipeline has been parallelized to process huge datasets of next generation sequencing. It has been developed in Java language and is available at http://hpc.icrisat.cgiar.org/ISMU as a standalone free software.

Creating a biopower agenda through grassroots organizing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hauter, W.

1995-11-01

Biomass electricity provides both opportunities for strengthening the rural economy and advancing environmental goals. However, while large scale biomass development can be done in a manner that both furthers economic development and helps prevent environmental degradation, its commercialization requires a complex coordination of activities between utilities and farmers. Inherent problems exist in creating parallel development of a resource base and technological advancements. In fact, an understanding of the anthropology of biopower is necessary in order to advance it on a large scale. The Union of Concerned Scientists (UCS) published a report on renewable electricity, released in March 1992, that hasmore » been used as a foundation for state-based work promoting renewables. In several Midwestern states, such as Nebraska, Minnesota, and Wisconsin, we have used classic grassroots organizing skills to educate the public and key constituencies about the benefits of biomass. Besides working directly with utilities to promote biomass development, we also have a legislative agenda that helps create a climate favorable to biopower. This paper will focus on the grassroots aspect of our campaigns. It will also include an overview of some anthropological work that the author has done in communities with farmers. The main tool for this has been focus groups. We have found that people can be organized around biomass issues and that a grassroots base furthers biomass development.« less

The impact of welfare reform on the health insurance coverage, utilization and health of low education single mothers.

PubMed

Narain, Kimberly; Bitler, Marianne; Ponce, Ninez; Kominski, Gerald; Ettner, Susan

2017-05-01

The Personal Responsibility Work Opportunity and Reconciliation Act (PRWORA) of 1996 imposed time limits on the receipt of welfare cash benefits and mandated cash benefit sanctions for failure to meet work requirements. Many studies examining the health implications of PRWORA have found associated declines in health insurance coverage and healthcare utilization among single mothers but no impact of PRWORA on health outcomes. A limitation of this literature is that most studies cover a time period before time limits were implemented in all states and also before individuals began actually timing out. This work builds on previous studies by exploring this research question using data from the Survey of Income and Program Participation that covers a time period after all states have implemented time limits (1991-2009). We use a difference-in-differences study design that exploits variability in eligibility for cash welfare benefits by marital status and state-level variation in timing of PRWORA implementation to identify the effect of PRWORA. Using ordinary least square regression models, controlling for state-level and federal policies, individual-level demographics and state and year fixed-effects, we find that PRWORA leads to 7 and 5 percentage point increases in self-reported poor health and self-reported disability among white single mothers without a diploma, respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Significance of A Neglected Romanian Book - "The Methods of the Clinical Laboratory", by Ioan Manta and Alexandru Ciplea.

PubMed

Barsu, Cristian

2017-04-06

"The Methods of Clinical Laboratory" was the first comprehensive Romanian book in the medical laboratory field, having utility in clinical practice. It was written by Prof. Ioan Manta (1900-1979) and Alexandru Ciplea (1912-1988), both from the Cluj Faculty of Medicine. The volume was published for the first time in 1944, during the refuge of this Faculty in Sibiu, and for the second time in 1947, in Cluj. Our aim is to make a brief analysis of its structure and to put into evidence the importance of this book for the Romanian laboratory medicine, some techniques (e.g. microscopic techniques) keeping their validity until today. The authors made over 800 detailed presentations about: laboratory sampling and preservation techniques, different types of tests and methods for qualitative and quantitative determinations, techniques to prepare various solutions, microbiological culture media, laboratory stains and reagents, as well as maneuvering of some laboratory equipments. For each method, Manta and Ciplea presented: the principle of working method, reagents required, the working technique, mode of calculation, the result and its interpretation. It also includes some laboratory apparatus descriptions, as well as their mode of working. With regard to the scientific value and to the practical utility of this book, it remains a very important milestone in the Romanian medical literature of the XX-th century.

Encapsulating Non-Human Primate Multipotent Stromal Cells in Alginate via High Voltage for Cell-Based Therapies and Cryopreservation

PubMed Central

Gryshkov, Oleksandr; Pogozhykh, Denys; Hofmann, Nicola; Pogozhykh, Olena; Mueller, Thomas; Glasmacher, Birgit

2014-01-01

Alginate cell-based therapy requires further development focused on clinical application. To assess engraftment, risk of mutations and therapeutic benefit studies should be performed in an appropriate non-human primate model, such as the common marmoset (Callithrix jacchus). In this work we encapsulated amnion derived multipotent stromal cells (MSCs) from Callithrix jacchus in defined size alginate beads using a high voltage technique. Our results indicate that i) alginate-cell mixing procedure and cell concentration do not affect the diameter of alginate beads, ii) encapsulation of high cell numbers (up to 10×106 cells/ml) can be performed in alginate beads utilizing high voltage and iii) high voltage (15–30 kV) does not alter the viability, proliferation and differentiation capacity of MSCs post-encapsulation compared with alginate encapsulated cells produced by the traditional air-flow method. The consistent results were obtained over the period of 7 days of encapsulated MSCs culture and after cryopreservation utilizing a slow cooling procedure (1 K/min). The results of this work show that high voltage encapsulation can further be maximized to develop cell-based therapies with alginate beads in a non-human primate model towards human application. PMID:25259731

Fluids and Materials Science Studies Utilizing the Microgravity-vibration Isolation Mount (MIM)

NASA Technical Reports Server (NTRS)

Herring, Rodney; Tryggvason, Bjarni; Duval, Walter

1998-01-01

Canada's Microgravity Sciences Program (MSP) is the smallest program of the ISS partners and so can participate in only a few, highly focused projects in order to make a scientific and technological impact. One focused project involves determining the effect of accelerations (g-jitter) on scientific measurements in a microgravity environment utilizing the Microgravity-vibration Isolation Mount (MIM). Many experiments share the common characteristic of having a fluid stage in their process. The quality of the experimental measurements have been expected to be affected by g-jitters which has lead the ISS program to include specifications to limit the level of acceleration allowed on a subset of experimental racks. From finite element analysis (FEM), the ISS structure will not be able to meet the acceleration specifications. Therefore, isolation systems are necessary. Fluid science results and materials science results show significant sensitivity to g-jitter. The work done to date should be viewed only as a first look at the issue of g-jitter sensitivity. The work should continue with high priority such that the international science community and the ISS program can address the requirement and settle on an agreed to overall approach as soon as possible.

Modeling static and dynamic human cardiovascular responses to exercise.

PubMed

Stremel, R W; Bernauer, E M; Harter, L W; Schultz, R A; Walters, R F

1975-08-01

A human performance model has been developed and described [9] which portrays the human circulatory, thermo regulatory and energy-exchange systems as an intercoupled set. In this model, steady state or static relationships are used to describe oxygen consumption and blood flow. For example, heart rate (HTRT) is calculated as a function of the oxygen and the thermo-regulatory requirements of each body compartment, using the steady state work values of cardiac output (CO, sum of all compartment blood flows) and stroke volume (SV, assumed maximal after 40% maximal oxygen consumption): HTRT=CO/SV. The steady state model has proven to be an acceptable first approximation, but the inclusion of transient characteristics are essential in describing the overall systems' adjustment to exercise stress. In the present study, the dynamic transient characteristics of heart rate, stroke volume and cardiac output were obtained from experiments utilizing step and sinusoidal forcing of work. The gain and phase relationships reveal a probable first order system with a six minute time constant, and are utilized to model the transient characteristics of these parameters. This approach leads to a more complex model but a more accurate representation of the physiology involved. The instrumentation and programming essential to these experiments are described.

Waterhyacinth: Biology, ecology and management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gopal, B.

This book provides a bibliography of over 2700 references and a critical review of the current knowledge on all aspects of the plant. Important data on all these aspects have been compiled and presented in numerous tables and figures making the book the most important reference work to date on waterhyacinth. Areas requiring the extra attention of researchers are also indicated. In recent years aquatic weeds such as waterhyacinth have received great attention, not only for the magnitude of problems caused by them in the management of water resources, but also for the promise they hold as a new resourcemore » for such diverse uses as animal feed, compost, paper, energy (biogas) and above all the control of water pollution (wastewater treatment). Waterhyacinth outclasses all other aquatic weeds in its rate of growth, multiplication and dry matter production, and its potential ability in respect to energy and pollution control. More research has been undertaken on the control and utilization of waterhyacinth than perhaps any other aquatic weed. The book is an indispensable reference work for anyone interested in waterhyacinth: for its control or utilization; its botany or ecology; its history and distribution.« less

Working With Socially and Medically Complex Patients: When Care Transitions Are Circular, Overlapping, and Continual Rather Than Linear and Finite.

PubMed

Roberts, Shauna R; Crigler, Jane; Ramirez, Cristina; Sisco, Deborah; Early, Gerald L

2015-01-01

The care coordination program described here evolved from 5 years of trial and learning related to how to best serve our high-cost, high-utilizing, chronically ill, urban core patient population. In addition to medical complexity, they have daily challenges characteristic of persons served by Safety-Net health systems. Many have unstable health insurance status. Others have insecure housing. A number of patients have a history of substance use and mental illness. Many have fractured social supports. Although some of the best-known care transition models have been successful in reducing rehospitalizations and cost among patients studied, these models were developed for a relatively high functioning patient population with social support. We describe a successful approach targeted at working with patients who require a more intense and lengthy care coordination intervention to self-manage and reduce the cost of caring for their medical conditions. Using a diverse team and a set of replicable processes, we have demonstrated statistically significant reduction in the use of hospital and emergency services. Our intervention leverages the strengths and resilience of patients, focuses on trust and self-management, and targets heterogeneous "high-utilizer" patients with medical and social complexity.

Determining sample size for tree utilization surveys

Treesearch

Stanley J. Zarnoch; James W. Bentley; Tony G. Johnson

2004-01-01

The U.S. Department of Agriculture Forest Service has conducted many studies to determine what proportion of the timber harvested in the South is actually utilized. This paper describes the statistical methods used to determine required sample sizes for estimating utilization ratios for a required level of precision. The data used are those for 515 hardwood and 1,557...

Consumer-based technology for distribution of surgical videos for objective evaluation.

PubMed

Gonzalez, Ray; Martinez, Jose M; Lo Menzo, Emanuele; Iglesias, Alberto R; Ro, Charles Y; Madan, Atul K

2012-08-01

The Global Operative Assessment of Laparoscopic Skill (GOALS) is one validated metric utilized to grade laparoscopic skills and has been utilized to score recorded operative videos. To facilitate easier viewing of these recorded videos, we are developing novel techniques to enable surgeons to view these videos. The objective of this study is to determine the feasibility of utilizing widespread current consumer-based technology to assist in distributing appropriate videos for objective evaluation. Videos from residents were recorded via a direct connection from the camera processor via an S-video output via a cable into a hub to connect to a standard laptop computer via a universal serial bus (USB) port. A standard consumer-based video editing program was utilized to capture the video and record in appropriate format. We utilized mp4 format, and depending on the size of the file, the videos were scaled down (compressed), their format changed (using a standard video editing program), or sliced into multiple videos. Standard available consumer-based programs were utilized to convert the video into a more appropriate format for handheld personal digital assistants. In addition, the videos were uploaded to a social networking website and video sharing websites. Recorded cases of laparoscopic cholecystectomy in a porcine model were utilized. Compression was required for all formats. All formats were accessed from home computers, work computers, and iPhones without difficulty. Qualitative analyses by four surgeons demonstrated appropriate quality to grade for these formats. Our preliminary results show promise that, utilizing consumer-based technology, videos can be easily distributed to surgeons to grade via GOALS via various methods. Easy accessibility may help make evaluation of resident videos less complicated and cumbersome.

Continuing Education/Training Needs of Water Utility & Wastewater Works Personnel in Wisconsin. Report of a Cooperative Statewide Survey.

ERIC Educational Resources Information Center

Wisconsin Univ. - Stout, Menomonie.

A survey was conducted during January and February of 1984 to ascertain the continuing education/training needs of personnel working in water utility and wastewater systems in Wisconsin. From the estimated 4,000 certified operators in water utilities, waste water treatment plants, and plant superintendents surveyed, 723 (18 percent) completed…

42 CFR 456.401 - State plan UR requirements and options; UR plan required for intermediate care facility services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false State plan UR requirements and options; UR plan required for intermediate care facility services. 456.401 Section 456.401 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Utilization Control:...

42 CFR 456.401 - State plan UR requirements and options; UR plan required for intermediate care facility services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 4 2014-10-01 2014-10-01 false State plan UR requirements and options; UR plan required for intermediate care facility services. 456.401 Section 456.401 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Utilization Control:...

Direct 3D-printing of cell-laden constructs in microfluidic architectures.

PubMed

Liu, Justin; Hwang, Henry H; Wang, Pengrui; Whang, Grace; Chen, Shaochen

2016-04-21

Microfluidic platforms have greatly benefited the biological and medical fields, however standard practices require a high cost of entry in terms of time and energy. The utilization of three-dimensional (3D) printing technologies has greatly enhanced the ability to iterate and build functional devices with unique functions. However, their inability to fabricate within microfluidic devices greatly increases the cost of producing several different devices to examine different scientific questions. In this work, a variable height micromixer (VHM) is fabricated using projection 3D-printing combined with soft lithography. Theoretical and flow experiments demonstrate that altering the local z-heights of VHM improved mixing at lower flow rates than simple geometries. Mixing of two fluids occurs as low as 320 μL min(-1) in VHM whereas the planar zigzag region requires a flow rate of 2.4 mL min(-1) before full mixing occurred. Following device printing, to further demonstrate the ability of this projection-based method, complex, user-defined cell-laden scaffolds are directly printed inside the VHM. The utilization of this unique ability to produce 3D tissue models within a microfluidic system could offer a unique platform for medical diagnostics and disease modeling.

Development of high capacity, high rate lithium ion batteries utilizing metal fiber conductive additives

NASA Astrophysics Data System (ADS)

Ahn, Soonho; Kim, Youngduk; Kim, Kyung Joon; Kim, Tae Hyung; Lee, Hyungkeun; Kim, Myung H.

As lithium ion cells dominate the battery market, the performance improvement is an utmost concern among developers and researchers. Conductive additives are routinely employed to enhance electrode conductivity and capacity. Carbon particulates—graphite or carbon black powders—are conventional and popular choices as conductive fillers. However, percolation requirements of particles demand significant volumetric content of impalpable, and thereby high area conductive fillers. As might be expected, the electrode active surface area escalates unnecessarily, resulting in overall increase in reaction with electrolytes and organic solvents. The increased reactions usually manifest as an irreversible loss of anode capacity, gradual oxidation and consumption of electrolyte on the cathode—which causes capacity decline during cycling—and an increased threat to battery safety by gas evolution and exothermic solvent oxidation. In this work we have utilized high aspect ratio, flexible, micronic metal fibers as low active area and high conductivity additives. The metal fibers appear well dispersed within the electrode and to satisfy percolation requirements very efficiently at very low volumetric content compared to conventional carbon-based conductive additives. Results from 18650-type cells indicate significant enhancements in electrode capacity and high rate capability while the irreversible capacity loss is negligible.

Life Cycle Water Consumption and Water Resource Assessment for Utility-Scale Geothermal Systems: An In-Depth Analysis of Historical and Forthcoming EGS Projects

DOE Data Explorer

Schroeder, Jenna N.

2013-08-31

This report is the third in a series of reports sponsored by the U.S. Department of Energy Geothermal Technologies Program in which a range of water-related issues surrounding geothermal power production are evaluated. The first report made an initial attempt at quantifying the life cycle fresh water requirements of geothermal power-generating systems and explored operational and environmental concerns related to the geochemical composition of geothermal fluids. The initial analysis of life cycle fresh water consumption of geothermal power-generating systems identified that operational water requirements consumed the vast majority of water across the life cycle. However, it relied upon limited operational water consumption data and did not account for belowground operational losses for enhanced geothermal systems (EGSs). A second report presented an initial assessment of fresh water demand for future growth in utility-scale geothermal power generation. The current analysis builds upon this work to improve life cycle fresh water consumption estimates and incorporates regional water availability into the resource assessment to improve the identification of areas where future growth in geothermal electricity generation may encounter water challenges.

Factors Influencing Service-Learning Utilization in Social Work: Results from an Online Survey of Faculty

ERIC Educational Resources Information Center

Cronley, Courtney; Madden, Elissa; Davis, Jaya; Preble, Kathleen

2014-01-01

The current study (N = 209) explored service-learning utilization in social work education by examining the influence of personal and institutional characteristics, perceived barriers, and beliefs about service-learning outcomes. Results of an online survey of social work educators showed that neither personal nor institutional characteristics…

Adaptive threshold determination for efficient channel sensing in cognitive radio network using mobile sensors

NASA Astrophysics Data System (ADS)

Morshed, M. N.; Khatun, S.; Kamarudin, L. M.; Aljunid, S. A.; Ahmad, R. B.; Zakaria, A.; Fakir, M. M.

2017-03-01

Spectrum saturation problem is a major issue in wireless communication systems all over the world. Huge number of users is joining each day to the existing fixed band frequency but the bandwidth is not increasing. These requirements demand for efficient and intelligent use of spectrum. To solve this issue, the Cognitive Radio (CR) is the best choice. Spectrum sensing of a wireless heterogeneous network is a fundamental issue to detect the presence of primary users' signals in CR networks. In order to protect primary users (PUs) from harmful interference, the spectrum sensing scheme is required to perform well even in low signal-to-noise ratio (SNR) environments. Meanwhile, the sensing period is usually required to be short enough so that secondary (unlicensed) users (SUs) can fully utilize the available spectrum. CR networks can be designed to manage the radio spectrum more efficiently by utilizing the spectrum holes in primary user's licensed frequency bands. In this paper, we have proposed an adaptive threshold detection method to detect presence of PU signal using free space path loss (FSPL) model in 2.4 GHz WLAN network. The model is designed for mobile sensors embedded in smartphones. The mobile sensors acts as SU while the existing WLAN network (channels) works as PU. The theoretical results show that the desired threshold range detection of mobile sensors mainly depends on the noise floor level of the location in consideration.

Effects of welfare and maternal work on recommended preventive care utilization among low-income children.

PubMed

Holl, Jane L; Oh, Elissa H; Yoo, Joan; Amsden, Laura B; Sohn, Min-Woong

2012-12-01

We examined how maternal work and welfare receipt are associated with children receiving recommended pediatric preventive care services. We identified American Academy of Pediatrics-recommended preventive care visits from medical records of children in the 1999-2004 Illinois Families Study: Child Well-Being. We used Illinois administrative data to identify whether mothers received welfare or worked during the period the visit was recommended, and we analyzed the child visit data using random-intercept logistic regressions that adjusted for child, maternal, and visit-specific characteristics. The 485 children (95%) meeting inclusion criteria made 41% of their recommended visits. Children were 60% more likely (adjusted odds ratios [AOR` = 1.60; 95% confidence interval [CI] = 1.27, 2.01) to make recommended visits when mothers received welfare but did not work compared with when mothers did not receive welfare and did not work. Children were 25% less likely (AOR = 0.75; 95% CI = 0.60, 0.94) to make preventive care visits during periods when mothers received welfare and worked compared with welfare only periods. The Temporary Assistance for Needy Families maternal work requirement may be a barrier to receiving recommended preventive pediatric health care.

Microorganism Utilization for Synthetic Milk

NASA Technical Reports Server (NTRS)

Morford, Megan A.; Khodadad, Christina L.; Caro, Janicce I.; Spencer, LaShelle E.; Richards, Jeffery T.; Strayer, Richard F.; Birmele, Michele N.; Wheeler, Raymond M.

2014-01-01

A desired architecture for long duration spaceflight, like aboard the International Space Station or for future missions to Mars, is to provide a supply of fresh food crops for the astronauts. However, some crops can create a high proportion of inedible plant waste. The main goal of the Synthetic Biology project, Cow in a Column, was to produce the components of milk (sugar, lipid, protein) from inedible plant waste by utilizing microorganisms (fungi, yeast, bacteria). Of particular interest was utilizing the valuable polysaccharide, cellulose, found in plant waste, to naturally fuel-through microorganism cellular metabolism- the creation of sugar (glucose), lipid (milk fat), and protein (casein) in order to produce a synthetic edible food product. Environmental conditions such as pH, temperature, carbon source, aeration, and choice microorganisms were optimized in the laboratory and the desired end-products, sugars and lipids, were analyzed. Trichoderma reesei, a known cellulolytic fungus, was utilized to drive the production of glucose, with the intent that the produced glucose would serve as the carbon source for milk fat production and be a substitute for the milk sugar lactose. Lipid production would be carried out by Rhodosporidium toruloides, yeast known to accumulate those lipids that are typically found in milk fat. Results showed that glucose and total lipid content were below what was expected during this phase of experimentation. In addition, individual analysis of six fatty acids revealed that the percentage of each fatty acid was lower than naturally produced bovine milk. Overall, this research indicates that microorganisms could be utilized to breakdown inedible solid waste to produce useable products. For future work, the production of the casein protein for milk would require the development of a genetically modified organism, which was beyond the scope of the original project. Additional trials would be needed to further refine the required environment/organisms for the production of desired sugar and lipid end-products.

Reducing Door-to-Needle Times using Toyota’s Lean Manufacturing Principles and Value Stream Analysis

PubMed Central

Ford, Andria L.; Williams, Jennifer A.; Spencer, Mary; McCammon, Craig; Khoury, Naim; Sampson, Tomoko; Panagos, Peter; Lee, Jin-Moo

2012-01-01

Background Earlier tPA treatment for acute ischemic stroke increases efficacy, prompting national efforts to reduce door-to-needle times (DNTs). We utilized lean process improvement methodology to develop a streamlined IV tPA protocol. Methods In early 2011, a multi-disciplinary team analyzed the steps required to treat acute ischemic stroke patients with IV tPA, utilizing value stream analysis (VSA). We directly compared the tPA-treated patients in the “pre-VSA” epoch to the “post-VSA” epoch with regard to baseline characteristics, protocol metrics, and clinical outcomes. Results The VSA revealed several tPA protocol inefficiencies: routing of patients to room, then to CT, then back to room; serial processing of work flow; and delays in waiting for lab results. On 3/1/2011, a new protocol incorporated changes to minimize delays: routing patients directly to head CT prior to patient room, utilizing parallel process work-flow, and implementing point-of-care labs. In the pre-and post-VSA epochs, 132 and 87 patients were treated with IV tPA, respectively. Compared to pre-VSA, DNTs and percent of patients treated ≤60 minutes from hospital arrival were improved in the post-VSA epoch: 60 min vs. 39 min (p<0.0001) and 52% vs. 78% (p<0.0001), respectively, with no change in symptomatic hemorrhage rate. Conclusions Lean process improvement methodology can expedite time-dependent stroke care, without compromising safety. PMID:23138440

Integrated Knowledge Translation: illustrated with outcome research in mental health.

PubMed

Preyde, Michele; Carter, Jeff; Penney, Randy; Lazure, Kelly; Vanderkooy, John; Chevalier, Pat

2015-01-01

Through this article the authors present a case summary of the early phases of research conducted with an Integrated Knowledge Translation (iKT) approach utilizing four factors: research question, research approach, feasibility, and outcome. iKT refers to an approach for conducting research in which community partners, referred to as knowledge users, are engaged in the entire research process. In this collaborative approach, knowledge users and researchers jointly devise the entire research agenda beginning with the development of the research question(s), determination of a feasible research design and feasible methods, interpretation of the results, dissemination of the findings, and the translation of knowledge into practice or policy decisions. Engaging clinical or community partners in the research enterprise can enhance the utility of the research results and facilitate its uptake. This collaboration can be a complex arrangement and flexibility may be required to accommodate the various configurations that the collaboration can take. For example, the research question can be jointly determined and refined; however, one person must take the responsibility for orchestrating the project, including preparing the proposal and application to the Research Ethics Board. This collaborative effort also requires the simultaneous navigation of barriers and facilitators to the research enterprise. Navigating these elements becomes part of the conduct of research with the potential for rewarding results, including an enriched work experience for clinical partners and investigators. One practice implication is that iKT may be considered of great utility to service providers due to its field friendly nature.

Energy Requirements of Hydrogen-utilizing Microbes: A Boundary Condition for Subsurface Life

NASA Technical Reports Server (NTRS)

Hoehler, Tori M.; Alperin, Marc J.; Albert, Daniel B.; Martens, Christopher S.

2003-01-01

Microbial ecosystems based on the energy supplied by water-rock chemistry carry particular significance in the context of geo- and astrobiology. With no direct dependence on solar energy, lithotrophic microbes could conceivably penetrate a planetary crust to a depth limited only by temperature or pressure constraints (several kilometers or more). The deep lithospheric habitat is thereby potentially much greater in volume than its surface counterpart, and in addition offers a stable refuge against inhospitable surface conditions related to climatic or atmospheric evolution (e.g., Mars) or even high-energy impacts (e.g., early in Earth's history). The possibilities for a deep microbial biosphere are, however, greatly constrained by life s need to obtain energy at a certain minimum rate (the maintenance energy requirement) and of a certain minimum magnitude (the energy quantum requirement). The mere existence of these requirements implies that a significant fraction of the chemical free energy available in the subsurface environment cannot be exploited by life. Similar limits may also apply to the usefulness of light energy at very low intensities or long wavelengths. Quantification of these minimum energy requirements in terrestrial microbial ecosystems will help to establish a criterion of energetic habitability that can significantly constrain the prospects for life in Earth's subsurface, or on other bodies in the solar system. Our early work has focused on quantifying the biological energy quantum requirement for methanogenic archaea, as representatives of a plausible subsurface metabolism, in anoxic sediments (where energy availability is among the most limiting factors in microbial population growth). In both field and laboratory experiments utilizing these sediments, methanogens retain a remarkably consistent free energy intake, in the face of fluctuating environmental conditions that affect energy availability. The energy yields apparently required by methanogens in these sediment systems for sustained metabolism are about half that previously thought necessary. Lowered energy requirements would imply that a correspondingly greater proportion of the planetary subsurface could represent viable habitat for microorganisms.

Modeling Requirements for Cohort and Register IT.

PubMed

Stäubert, Sebastian; Weber, Ulrike; Michalik, Claudia; Dress, Jochen; Ngouongo, Sylvie; Stausberg, Jürgen; Winter, Alfred

2016-01-01

The project KoRegIT (funded by TMF e.V.) aimed to develop a generic catalog of requirements for research networks like cohort studies and registers (KoReg). The catalog supports such kind of research networks to build up and to manage their organizational and IT infrastructure. To make transparent the complex relationships between requirements, which are described in use cases from a given text catalog. By analyzing and modeling the requirements a better understanding and optimizations of the catalog are intended. There are two subgoals: a) to investigate one cohort study and two registers and to model the current state of their IT infrastructure; b) to analyze the current state models and to find simplifications within the generic catalog. Processing the generic catalog was performed by means of text extraction, conceptualization and concept mapping. Then methods of enterprise architecture planning (EAP) are used to model the extracted information. To work on objective a) questionnaires are developed by utilizing the model. They are used for semi-structured interviews, whose results are evaluated via qualitative content analysis. Afterwards the current state was modeled. Objective b) was done by model analysis. A given generic text catalog of requirements was transferred into a model. As result of objective a) current state models of one existing cohort study and two registers are created and analyzed. An optimized model called KoReg-reference-model is the result of objective b). It is possible to use methods of EAP to model requirements. This enables a better overview of the partly connected requirements by means of visualization. The model based approach also enables the analysis and comparison of the empirical data from the current state models. Information managers could reduce the effort of planning the IT infrastructure utilizing the KoReg-reference-model. Modeling the current state and the generation of reports from the model, which could be used as requirements specification for bids, is supported, too.

Investigation into Cloud Computing for More Robust Automated Bulk Image Geoprocessing

NASA Technical Reports Server (NTRS)

Brown, Richard B.; Smoot, James C.; Underwood, Lauren; Armstrong, C. Duane

2012-01-01

Geospatial resource assessments frequently require timely geospatial data processing that involves large multivariate remote sensing data sets. In particular, for disasters, response requires rapid access to large data volumes, substantial storage space and high performance processing capability. The processing and distribution of this data into usable information products requires a processing pipeline that can efficiently manage the required storage, computing utilities, and data handling requirements. In recent years, with the availability of cloud computing technology, cloud processing platforms have made available a powerful new computing infrastructure resource that can meet this need. To assess the utility of this resource, this project investigates cloud computing platforms for bulk, automated geoprocessing capabilities with respect to data handling and application development requirements. This presentation is of work being conducted by Applied Sciences Program Office at NASA-Stennis Space Center. A prototypical set of image manipulation and transformation processes that incorporate sample Unmanned Airborne System data were developed to create value-added products and tested for implementation on the "cloud". This project outlines the steps involved in creating and testing of open source software developed process code on a local prototype platform, and then transitioning this code with associated environment requirements into an analogous, but memory and processor enhanced cloud platform. A data processing cloud was used to store both standard digital camera panchromatic and multi-band image data, which were subsequently subjected to standard image processing functions such as NDVI (Normalized Difference Vegetation Index), NDMI (Normalized Difference Moisture Index), band stacking, reprojection, and other similar type data processes. Cloud infrastructure service providers were evaluated by taking these locally tested processing functions, and then applying them to a given cloud-enabled infrastructure to assesses and compare environment setup options and enabled technologies. This project reviews findings that were observed when cloud platforms were evaluated for bulk geoprocessing capabilities based on data handling and application development requirements.

Warfarin Pharmacogenetics

PubMed Central

Johnson, Julie A.; Cavallari, Larisa H.

2014-01-01

The cytochrome P450 (CYP) 2C9 and vitamin K epoxide reductase complex 1 (VKORC1) genotypes have been strongly and consistently associated with warfarin dose requirements, and dosing algorithms incorporating genetic and clinical information have been shown to be predictive of stable warfarin dose. However, clinical trials evaluating genotype-guided warfarin dosing produced mixed results, calling into question the utility of this approach. Recent trials used surrogate markers as endpoints rather than clinical endpoints, further complicating translation of the data to clinical practice. The present data do not support genetic testing to guide warfarin dosing, but in the setting where genotype data are available, use of such data in those of European ancestry is reasonable. Outcomes data are expected from an on-going trial, observational studies continue, and more work is needed to define dosing algorithms that incorporate appropriate variants in minority populations; all these will further shape guidelines and recommendations on the clinical utility of genotype-guided warfarin dosing. PMID:25282448

Novel antibiofilm chemotherapies target nitrogen from glutamate and glutamine.

PubMed

Hassanov, Tal; Karunker, Iris; Steinberg, Nitai; Erez, Ayelet; Kolodkin-Gal, Ilana

2018-05-08

Bacteria in nature often reside in differentiated communities termed biofilms, which are an active interphase between uni-cellular and multicellular life states for bacteria. Here we demonstrate that the development of B. subtilis biofilms is dependent on the use of glutamine or glutamate as a nitrogen source. We show a differential metabolic requirement within the biofilm; while glutamine is necessary for the dividing cells at the edges, the inner cell mass utilizes lactic acid. Our results indicate that biofilm cells preserve a short-term memory of glutamate metabolism. Finally, we establish that drugs that target glutamine and glutamate utilization restrict biofilm development. Overall, our work reveals a spatial regulation of nitrogen and carbon metabolism within the biofilm, which contributes to the fitness of bacterial complex communities. This acquired metabolic division of labor within biofilm can serve as a target for novel anti-biofilm chemotherapies.

Extremum Seeking Control of Smart Inverters for VAR Compensation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnold, Daniel; Negrete-Pincetic, Matias; Stewart, Emma

2015-09-04

Reactive power compensation is used by utilities to ensure customer voltages are within pre-defined tolerances and reduce system resistive losses. While much attention has been paid to model-based control algorithms for reactive power support and Volt Var Optimization (VVO), these strategies typically require relatively large communications capabilities and accurate models. In this work, a non-model-based control strategy for smart inverters is considered for VAR compensation. An Extremum Seeking control algorithm is applied to modulate the reactive power output of inverters based on real power information from the feeder substation, without an explicit feeder model. Simulation results using utility demand informationmore » confirm the ability of the control algorithm to inject VARs to minimize feeder head real power consumption. In addition, we show that the algorithm is capable of improving feeder voltage profiles and reducing reactive power supplied by the distribution substation.« less

Development of thermal energy storage materials for biomedical applications.

PubMed

Shukla, A; Sharma, Atul; Shukla, Manjari; Chen, C R

2015-01-01

The phase change materials (PCMs) have been utilized widely for solar thermal energy storage (TES) devices. The quality of these materials to remain at a particular temperature during solid-liquid, liquid-solid phase transition can also be utilized for many biomedical applications as well and has been explored in recent past already. This study reports some novel PCMs developed by them, along with some existing PCMs, to be used for such biomedical applications. Interestingly, it was observed that the heating/cooling properties of these PCMs enhance the quality of a variety of biomedical applications with many advantages (non-electric, no risk of electric shock, easy to handle, easy to recharge thermally, long life, cheap and easily available, reusable) over existing applications. Results of the present study are quite interesting and exciting, opening a plethora of opportunities for more work on the subject, which require overlapping expertise of material scientists, biochemists and medical experts for broader social benefits.

Water safety plans: bridges and barriers to implementation in North Carolina.

PubMed

Amjad, Urooj Quezon; Luh, Jeanne; Baum, Rachel; Bartram, Jamie

2016-10-01

First developed by the World Health Organization, and now used in several countries, water safety plans (WSPs) are a multi-step, preventive process for managing drinking water hazards. While the beneficial impacts of WSPs have been documented in diverse countries, how to successfully implement WSPs in the United States remains a challenge. We examine the willingness and ability of water utility leaders to implement WSPs in the US state of North Carolina. Our findings show that water utilities have more of a reactive than preventive organizational culture, that implementation requires prioritization of time and resources, perceived comparative advantage to other hazard management plans, leadership in implementation, and identification of how WSPs can be embedded in existing work practices. Future research could focus on whether WSP implementation provides benefits such as decreases in operational costs, and improved organization of records and communication.

Total-body photography in skin cancer screening: the clinical utility of standardized imaging.

PubMed

Rosenberg, Alexandra; Meyerle, Jon H

2017-05-01

Early detection of skin cancer is essential to reducing morbidity and mortality from both melanoma and nonmelanoma skin cancers. Total-body skin examinations (TBSEs) may improve early detection of malignant melanomas (MMs) but are controversial due to the poor quality of data available to establish a mortality benefit from skin cancer screening. Total-body photography (TBP) promises to provide a way forward by lowering the costs of dermatologic screening while simultaneously leveraging technology to increase patient access to dermatologic care. Standardized TBP also offers the ability for dermatologists to work synergistically with modern computer technology involving algorithms capable of analyzing high-quality images to flag concerning lesions that may require closer evaluation. On a population level, inexpensive TBP has the potential to increase access to skin cancer screening and it has several specific applications in a military population. The utility of standardized TBP is reviewed in the context of skin cancer screening and teledermatology.

High throughput dual-wavelength temperature distribution imaging via compressive imaging

NASA Astrophysics Data System (ADS)

Yao, Xu-Ri; Lan, Ruo-Ming; Liu, Xue-Feng; Zhu, Ge; Zheng, Fu; Yu, Wen-Kai; Zhai, Guang-Jie

2018-03-01

Thermal imaging is an essential tool in a wide variety of research areas. In this work we demonstrate high-throughput double-wavelength temperature distribution imaging using a modified single-pixel camera without the requirement of a beam splitter (BS). A digital micro-mirror device (DMD) is utilized to display binary masks and split the incident radiation, which eliminates the necessity of a BS. Because the spatial resolution is dictated by the DMD, this thermal imaging system has the advantage of perfect spatial registration between the two images, which limits the need for the pixel registration and fine adjustments. Two bucket detectors, which measures the total light intensity reflected from the DMD, are employed in this system and yield an improvement in the detection efficiency of the narrow-band radiation. A compressive imaging algorithm is utilized to achieve under-sampling recovery. A proof-of-principle experiment was presented to demonstrate the feasibility of this structure.

Reversible integer wavelet transform for blind image hiding method

PubMed Central

Bibi, Nargis; Mahmood, Zahid; Akram, Tallha; Naqvi, Syed Rameez

2017-01-01

In this article, a blind data hiding reversible methodology to embed the secret data for hiding purpose into cover image is proposed. The key advantage of this research work is to resolve the privacy and secrecy issues raised during the data transmission over the internet. Firstly, data is decomposed into sub-bands using the integer wavelets. For decomposition, the Fresnelet transform is utilized which encrypts the secret data by choosing a unique key parameter to construct a dummy pattern. The dummy pattern is then embedded into an approximated sub-band of the cover image. Our proposed method reveals high-capacity and great imperceptibility of the secret embedded data. With the utilization of family of integer wavelets, the proposed novel approach becomes more efficient for hiding and retrieving process. It retrieved the secret hidden data from the embedded data blindly, without the requirement of original cover image. PMID:28498855

Uniform quantized electron gas

NASA Astrophysics Data System (ADS)

Høye, Johan S.; Lomba, Enrique

2016-10-01

In this work we study the correlation energy of the quantized electron gas of uniform density at temperature T  =  0. To do so we utilize methods from classical statistical mechanics. The basis for this is the Feynman path integral for the partition function of quantized systems. With this representation the quantum mechanical problem can be interpreted as, and is equivalent to, a classical polymer problem in four dimensions where the fourth dimension is imaginary time. Thus methods, results, and properties obtained in the statistical mechanics of classical fluids can be utilized. From this viewpoint we recover the well known RPA (random phase approximation). Then to improve it we modify the RPA by requiring the corresponding correlation function to be such that electrons with equal spins can not be on the same position. Numerical evaluations are compared with well known results of a standard parameterization of Monte Carlo correlation energies.

The interactive electrode localization utility: software for automatic sorting and labeling of intracranial subdural electrodes

PubMed Central

Tang, Wei; Peled, Noam; Vallejo, Deborah I.; Borzello, Mia; Dougherty, Darin D.; Eskandar, Emad N.; Widge, Alik S.; Cash, Sydney S.; Stufflebeam, Steven M.

2018-01-01

Purpose Existing methods for sorting, labeling, registering, and across-subject localization of electrodes in intracranial encephalography (iEEG) may involve laborious work requiring manual inspection of radiological images. Methods We describe a new open-source software package, the interactive electrode localization utility which presents a full pipeline for the registration, localization, and labeling of iEEG electrodes from CT and MR images. In addition, we describe a method to automatically sort and label electrodes from subdural grids of known geometry. Results We validated our software against manual inspection methods in twelve subjects undergoing iEEG for medically intractable epilepsy. Our algorithm for sorting and labeling performed correct identification on 96% of the electrodes. Conclusions The sorting and labeling methods we describe offer nearly perfect performance and the software package we have distributed may simplify the process of registering, sorting, labeling, and localizing subdural iEEG grid electrodes by manual inspection. PMID:27915398

Regulation of nitrogen uptake and assimilation: Effects of nitrogen source, root-zone pH, and aerial CO2 concentration on growth and productivity of soybeans

NASA Technical Reports Server (NTRS)

Raper, C. D.; Tolley-Henry, L.

1989-01-01

An important feature of controlled-environment crop production systems such as those to be used for life support of crews during space exploration is the efficient utilization of nitrogen supplies. Making decisions about the best sources of these supplies requires research into the relationship between nitrogen source and the physiological processes which regulate vegetative and reproductive plant growth. Work done in four areas within this research objective is reported: (1) experiments on the effects of root-zone pH on preferential utilization of NO3(-) versus NH4(+) nitrogen; (2) investigation of processes at the whole-plant level that regulate nitrogen uptake; (3) studies of the effects of atmospheric CO2 and NO3(-) supply on the growth of soybeans; and (4) examination of the role of NO3(-) uptake in enhancement of root respiration.

Introduction to the computational structural mechanics testbed

NASA Technical Reports Server (NTRS)

Lotts, C. G.; Greene, W. H.; Mccleary, S. L.; Knight, N. F., Jr.; Paulson, S. S.; Gillian, R. E.

1987-01-01

The Computational Structural Mechanics (CSM) testbed software system based on the SPAR finite element code and the NICE system is described. This software is denoted NICE/SPAR. NICE was developed at Lockheed Palo Alto Research Laboratory and contains data management utilities, a command language interpreter, and a command language definition for integrating engineering computational modules. SPAR is a system of programs used for finite element structural analysis developed for NASA by Lockheed and Engineering Information Systems, Inc. It includes many complementary structural analysis, thermal analysis, utility functions which communicate through a common database. The work on NICE/SPAR was motivated by requirements for a highly modular and flexible structural analysis system to use as a tool in carrying out research in computational methods and exploring computer hardware. Analysis examples are presented which demonstrate the benefits gained from a combination of the NICE command language with a SPAR computational modules.

Strategies for Time-resolved X-ray Diffraction of Phase Transitions with Laser Compression

NASA Astrophysics Data System (ADS)

Benedetti, Laura Robin; Eggert, J. H.; Bradley, D. K.; Bell, P. M.; Kilkenny, J. D.; Palmer, N.; Petre, R. B.; Rygg, J. R.; Sorce, C.; Collins, G. W.; Boehly, T. R.

2017-10-01

As part of a program to document kinetics of phase transitions under laser-driven dynamic compression, we are designing a platform to make multiple x-ray diffraction measurements during a single laser experiment. Our plans include experimental development at Omega-EP and eventual implementation at NIF. We will present our strategy for designing a robust platform that can effectively document a wide variety of phase transformations by utilizing both streaked and multiple-frame imaging detectors. Preliminary designs utilize a novel CMOS detector designed by Sandia National Lab. Our initial experiments include scoping studies that will focus on photometrics and shielding requirements in the high EMP environment close to the target. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. Lawrence Livermore National Security, LLC, LLNL-ABS-734470.

A sensitive gas chromatography detector based on atmospheric pressure chemical ionization by a dielectric barrier discharge.

PubMed

Kirk, Ansgar T; Last, Torben; Zimmermann, Stefan

2017-02-03

In this work, we present a novel concept for a gas chromatography detector utilizing an atmospheric pressure chemical ionization which is initialized by a dielectric barrier discharge. In general, such a detector can be simple and low-cost, while achieving extremely good limits of detection. However, it is non-selective apart from the use of chemical dopants. Here, a demonstrator manufactured entirely from fused silica capillaries and printed circuit boards is shown. It has a size of 75×60×25mm 3 and utilizes only 2W of power in total. Unlike other known discharge detectors, which require high-purity helium, this detector can theoretically be operated using any gas able to form stable ion species. Here, purified air is used. With this setup, limits of detection in the low parts-per-billion range have been obtained for acetone. Copyright © 2017 Elsevier B.V. All rights reserved.

Insulin modulates hippocampally-mediated spatial working memory via glucose transporter-4.

PubMed

Pearson-Leary, J; Jahagirdar, V; Sage, J; McNay, E C

2018-02-15

The insulin-regulated glucose transporter, GluT4, is a key molecule in peripheral insulin signaling. Although GluT4 is abundantly expressed in neurons of specific brain regions such as the hippocampus, the functional role of neuronal GluT4 is unclear. Here, we used pharmacological inhibition of GluT4-mediated glucose uptake to determine whether GluT4 mediates insulin-mediated glucose uptake in the hippocampus. Consistent with previous reports, we found that glucose utilization increased in the dorsal hippocampus of male rats during spontaneous alternation (SA), a hippocampally-mediated spatial working memory task. We previously showed that insulin signaling within the hippocampus is required for processing this task, and that administration of exogenous insulin enhances performance. At baseline levels of hippocampal insulin, inhibition of GluT4-mediated glucose uptake did not affect SA performance. However, inhibition of an upstream regulator of GluT4, Akt, did impair SA performance. Conversely, when a memory-enhancing dose of insulin was delivered to the hippocampus prior to SA-testing, inhibition of GluT4-mediated glucose transport prevented cognitive enhancement. These data suggest that baseline hippocampal cognitive processing does not require functional hippocampal GluT4, but that cognitive enhancement by supra-baseline insulin does. Consistent with these findings, we found that in neuronal cell culture, insulin increases glucose utilization in a GluT4-dependent manner. Collectively, these data demonstrate a key role for GluT4 in transducing the procognitive effects of elevated hippocampal insulin. Copyright © 2017 Elsevier B.V. All rights reserved.

Impact of solifenacin on resource utilization, work productivity and health utility in overactive bladder patients switching from tolterodine ER.

PubMed

Zinner, Norman; Noe, Les; Rasouliyan, Lawrence; Marshall, Thomas; Seifeldin, Raafat

2008-06-01

Assess changes in resource utilization, work and activity impairment, and health utility among OAB patients continuing to have urgency symptoms with tolterodine ER 4 mg and willing to try solifenacin 5/10 mg. This was an open-label, non-comparative, flexible-dosing, multicenter, 12-week study assessing the efficacy and safety of solifenacin 5/10 mg/day. Patients receiving tolterodine ER 4 mg/day for >/=4 weeks but continuing to experience residual urgency symptoms (>/=3 urgency episodes/24 h) were enrolled into the study. After a 14-day washout, patients began treatment with solifenacin 5 mg/day with dosing adjustments allowed at Weeks 4 and 8. Outcomes were assessed using the Work Productivity and Activity Impairment Questionnaire - Specific Health Problem (WPAI-SHP), Health Utilities Index (HUI), and a resource utilization questionnaire administered at Pre-Washout and Week 12. Patients (n=440) reported significantly fewer physician office visits (p<0.0001), UTIs (p<0.0001), and pads/diapers (p=0.0009) during the study period while receiving solifenacin 5/10 mg/day, compared with the Pre-Washout period when receiving tolterodine ER 4 mg/day. After 12 weeks of treatment with solifenacin 5/10 mg/day, patients reported a reduction in work time missed (p=0.0017), less impairment while working (p<0.0001), less overall work impairment (p<0.0001) and a reduction in activity impairment (p<0.0001) compared to Pre-Washout. There was no significant difference in health utility scores. Treatment-emergent adverse events were mostly anticholinergic in nature, and were mild to moderate in severity. Overall, solifenacin 5/10 mg/day improved work productivity, activity participation, and reduced medical care use in OAB patients who continued to have urgency symptoms with tolterodine ER 4 mg/day and wished to switch to solifenacin 5/10 mg. This was an open-label, non-comparative study; therefore, further research is needed to confirm these results.

The cost of energy from utility-owned solar electric systems. A required revenue methodology for ERDA/EPRI evaluations

NASA Technical Reports Server (NTRS)

1976-01-01

This methodology calculates the electric energy busbar cost from a utility-owned solar electric system. This approach is applicable to both publicly- and privately-owned utilities. Busbar cost represents the minimum price per unit of energy consistent with producing system-resultant revenues equal to the sum of system-resultant costs. This equality is expressed in present value terms, where the discount rate used reflects the rate of return required on invested capital. Major input variables describe the output capabilities and capital cost of the energy system, the cash flows required for system operation amd maintenance, and the financial structure and tax environment of the utility.

Solar sustained plasma/absorber conceptual design

NASA Technical Reports Server (NTRS)

Rodgers, R. J.; Krascella, N. L.; Kendall, J. S.

1979-01-01

A space power system concept was evaluated which uses concentrated solar energy to heat a working fluid to temperatures as high as 4000 K. The high temperature working fluid could be used for efficient electric power production in advanced thermal or magnetohydrodynamic conversion cycles. Energy absorber configurations utilizing particles or cesium vapor absorber material were investigaed. Results of detailed radiant heat transfer calculations indicated approximately 86 percent of the incident solar energy could be absorbed within a 12-cm-dia flowing stream of gas borne carbon particles. Calculated total energy absorption in the cesium vapor seeded absorber configuration ranged from 34 percent to 64 percent of the incident solar energy. Solar flux concentration ratios of between approximately 3000 and 10,000 will be required to sustain absorber temperatures in the range from 3000 K to 4000 K.

Another expert system rule inference based on DNA molecule logic gates

NASA Astrophysics Data System (ADS)

WÄ siewicz, Piotr

2013-10-01

With the help of silicon industry microfluidic processors were invented utilizing nano membrane valves, pumps and microreactors. These so called lab-on-a-chips combined together with molecular computing create molecular-systems-ona- chips. This work presents a new approach to implementation of molecular inference systems. It requires the unique representation of signals by DNA molecules. The main part of this work includes the concept of logic gates based on typical genetic engineering reactions. The presented method allows for constructing logic gates with many inputs and for executing them at the same quantity of elementary operations, regardless of a number of input signals. Every microreactor of the lab-on-a-chip performs one unique operation on input molecules and can be connected by dataflow output-input connections to other ones.

Dynamic interferometer alignment and its utility in UV Fourier transform spectrometer systems

NASA Technical Reports Server (NTRS)

Dorval, Rick K.; Engel, James R.; Wyntjes, Geert J.

1993-01-01

Dynamic alignment has been demonstrated as a practical approach to alignment maintenance for systems in the infrared region of the spectrum. On the basis of work done by OPTRA, this technique was introduced in commercial Fourier transform spectrometer systems in 1982 and in various forms is now available from a number of manufacturers. This paper reports on work by OPTRA to extend the basic technique to systems operating in the ultraviolet. In addition, this paper reports the preliminary results of the development of an alignment system using a laser diode in place of a gas laser normally found in dynamic alignment systems. A unique optical system and spatial heterodyne technique allows for achievement of a metrology system with characteristics that fully satisfy the requirements of an ultraviolet spectrometer system.

Crew-Centered Operations: What HAL 9000 Should Have Been

NASA Technical Reports Server (NTRS)

Korsmeyer, David J.; Clancy, Daniel J.; Crawford, James M.; Drummond, Mark E.

2005-01-01

To date, manned space flight has maintained the locus of control for the mission on the ground. Mission control performs tasks such as activity planning, system health management, resource allocation, and astronaut health monitoring. Future exploration missions require the locus of control to shift to on-board due light speed constraints and potential loss of communication. The lunar campaign must begin to utilize a shared control approach to validate and understand the limitations of the technology allowing astronauts to oversee and direct aspects of operation that require timely decision making. Crew-centered Operations require a system-level approach that integrates multiple technologies together to allow a crew-prime concept of operations. This paper will provide an overview of the driving mission requirements, highlighting the limitations of existing approaches to mission operations and identifying the critical technologies necessary to enable a crew-centered mode of operations. The paper will focus on the requirements, trade spaces, and concepts for fulfillment of this capability. The paper will provide a broad overview of relevant technologies including: Activity Planning and Scheduling; System Monitoring; Repair and Recovery; Crew Work Practices.

Endometrial ablation: normal appearance and complications.

PubMed

Drylewicz, Monica R; Robinson, Kathryn; Siegel, Cary Lynn

2018-03-14

Global endometrial ablation is a commonly performed, minimally invasive technique aimed at improving/resolving abnormal uterine bleeding and menorrhagia in women. As non-resectoscopic techniques have come into existence, endometrial ablation performance continues to increase due to accessibility and decreased requirements for operating room time and advanced technical training. The increased utilization of this method translates into increased imaging of patients who have undergone the procedure. An understanding of the expected imaging appearances of endometrial ablation using different modalities is important for the abdominal radiologist. In addition, the frequent usage of the technique naturally comes with complications requiring appropriate imaging work-up. We review the expected appearance of the post-endometrial ablated uterus on multiple imaging modalities and demonstrate the more common and rare complications seen in the immediate post-procedural time period and remotely.

Beyond the Baseline 1991: Proceedings of the Space Station Evolution Symposium. Volume 1: Space Station Freedom, part 1

NASA Technical Reports Server (NTRS)

1991-01-01

Personnel responsible for Advanced Systems Studies and Advanced Development within the Space Station Freedom Program reported on the results of their work to date. The results of SSF Advanced Studies provide a road map for the evolution of Freedom in terms of user requirements, utilization and operations concepts, and growth options for distributed systems. Regarding these specific systems, special attention is given to: highlighting changes made during restructuring; description of growth paths thru the follow-on and evolution phases; identification of minimum impact provisions to allow flexibility in the baseline; and identification of enhancing and enabling technologies. Products of these tasks include: engineering fidelity demonstrations and evaluations of advanced technology; detailed requirements, performance specifications, and design accommodations for insertion of advanced technology.

Social determinants of bone densitometry uptake for osteoporosis risk in patients aged 50yr and older: a systematic review.

PubMed

Brennan, Sharon L; Wluka, Anita E; Gould, Haslinda; Nicholson, Geoffrey C; Leslie, William D; Ebeling, Peter R; Oldenburg, Brian; Kotowicz, Mark A; Pasco, Julie A

2012-01-01

The World Health Organization identifies that osteoporosis is one of the leading health problems in the Western world. An increased risk of fragility fracture is observed in more socially disadvantaged individuals in most Western countries. Dual-energy X-ray absorptiometry (DXA) is currently the procedure of choice to diagnose osteoporosis and assess fracture risk. We systematically reviewed the literature regarding social determinants of DXA utilization for osteoporosis detection in patients aged 50yr and older using a computer-aided search of MEDLINE, EMBASE, CINAHL, and PsychINFO from January 1994 to December 2010. Five cross-sectional studies, incorporating 16 separate analyses, were identified for inclusion in this review. The best evidence analysis identified limited evidence for a positive association between either income or education with DXA utilization; furthermore, the best evidence analysis found no evidence for an association between either marital status or working status and DXA utilization. Further research is required to identify whether a relationship exists and elucidate reasons for disparities in DXA utilization between different social groups, such as choice and referral processes, as a necessary precursor in identifying modifiable determinants and appropriate strategies to promote preventive screening to identify fracture risk. Copyright © 2012 The International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.

Space vehicle concepts

NASA Technical Reports Server (NTRS)

Tucker, Michael; Meredith, Oliver; Brothers, Bobby

1986-01-01

Several concepts of chemical-propulsion Space Vehicles (SVs) for manned Mars landing missions are presented. For vehicle sizing purposes, several specific missions were chosen from opportunities in the late 1990's and early 2000's, and a vehicle system concept is then described which is applicable to the full range of missions and opportunities available. In general, missions utilizing planetary opposition alignments can be done with smaller vehicles than those utilizing planetary opposition alignments. The conjunction missions have a total mission time of about 3 years, including a required stay-time of about 60 days. Both types of missions might be desirable during a Mars program, the opposition type for early low-risk missions and/or for later unmanned cargo missions, and the conjunction type for more extensive science/exploration missions and/or for Mars base activities. Since the opposition missions appeared to drive the SV size more severely, there were probably more cases examined for them. Some of the concepts presented utilize all-propulsive braking, some utilize and all aerobraking approach, and some are hybrids. Weight statements are provided for various cases. Most of the work was done on 0-g vehicle concepts, but partial-g and 1-g concepts are also provided and discussed. Several options for habitable elements are shown, such as large-diameter modules and space station (SS) types of modules.

Utilization of polyethylene terephthalate (PET) in bituminous mixture for improved performance of roads

NASA Astrophysics Data System (ADS)

Ahmad, A. F.; Razali, A. R.; Razelan, I. S. M.; Jalil, S. S. A.; Noh, M. S. M.; Idris, A. A.

2017-05-01

Plastic bottle for recycling can be found from the household waste stream, and most of them are made from Polyethylene Terephthalate. In this research, PET is utilized to explore the potential prospects to upgrade asphalt mixture properties. The objectives include deciding the best measure of PET to be used. For experimental, Marshall mix design was utilized to determine the ideal bitumen binder content and to test the modified mixture properties. The samples were created per the requirement for aggregate course wearing (ACW14) using the Standard Specification of Road Work (SSRW) in Malaysia. 20 samples were utilized to determine the binder content, and 30 samples were used to research the impact of modifying asphalt mixtures. 2%, 5%, 10%, 15% and 20% of PET by weight of the optimum binder content (4.8%) were tested. Optimum PET content is 10%, and the result shows a good stability with 16.824kN, 2.32g/cm3 bulk density, void filled with bitumen (VFB) with 71.35%, flow with 3.2248mm, air void (AV) with 4.53%, and void of mineral aggregate (VMA) with 15.15%. The outcomes showed that PET modifier gives better engineering properties. Therefore, 10% of PET by the weight of binder content was suggested as the best amount of the modifier.

Topometry optimization of sheet metal structures for crashworthiness design using hybrid cellular automata

NASA Astrophysics Data System (ADS)

Mozumder, Chandan K.

The objective in crashworthiness design is to generate plastically deformable energy absorbing structures which can satisfy the prescribed force-displacement (FD) response. The FD behavior determines the reaction force, displacement and the internal energy that the structure should withstand. However, attempts to include this requirement in structural optimization problems remain scarce. The existing commercial optimization tools utilize models under static loading conditions because of the complexities associated with dynamic/impact loading. Due to the complexity of a crash event and the consequent time required to numerically analyze the dynamic response of the structure, classical methods (i.e., gradient-based and direct) are not well developed to solve this undertaking. This work presents an approach under the framework of the hybrid cellular automaton (HCA) method to solve the above challenge. The HCA method has been successfully applied to nonlinear transient topology optimization for crashworthiness design. In this work, the HCA algorithm has been utilized to develop an efficient methodology for synthesizing shell-based sheet metal structures with optimal material thickness distribution under a dynamic loading event using topometry optimization. This method utilizes the cellular automata (CA) computing paradigm and nonlinear transient finite element analysis (FEA) via ls-dyna. In this method, a set field variables is driven to their target states by changing a convenient set of design variables (e.g., thickness). These rules operate locally in cells within a lattice that only know local conditions. The field variables associated with the cells are driven to a setpoint to obtain the desired structure. This methodology is used to design for structures with controlled energy absorption with specified buckling zones. The peak reaction force and the maximum displacement are also constrained to meet the desired safety level according to passenger safety regulations. Design for prescribed FD response by minimizing the error between the actual response and desired FD curve is implemented. With the use of HCA rules, manufacturability constraints (e.g., rolling) and structures which can be manufactured by special techniques, such as, tailor-welded blanks (TWB), have also been implemented. This methodology is applied to shock-absorbing structural components for passengers in a crashing vehicle. These results are compared to previous designs showing the benefits of the method introduced in this work.

Risk-based transfer responses to climate change, simulated through autocorrelated stochastic methods

NASA Astrophysics Data System (ADS)

Kirsch, B.; Characklis, G. W.

2009-12-01

Maintaining municipal water supply reliability despite growing demands can be achieved through a variety of mechanisms, including supply strategies such as temporary transfers. However, much of the attention on transfers has been focused on market-based transfers in the western United States largely ignoring the potential for transfers in the eastern U.S. The different legal framework of the eastern and western U.S. leads to characteristic differences between their respective transfers. Western transfers tend to be agricultural-to-urban and involve raw, untreated water, with the transfer often involving a simple change in the location and/or timing of withdrawals. Eastern transfers tend to be contractually established urban-to-urban transfers of treated water, thereby requiring the infrastructure to transfer water between utilities. Utilities require the tools to be able to evaluate transfer decision rules and the resulting expected future transfer behavior. Given the long-term planning horizons of utilities, potential changes in hydrologic patterns due to climate change must be considered. In response, this research develops a method for generating a stochastic time series that reproduces the historic autocorrelation and can be adapted to accommodate future climate scenarios. While analogous in operation to an autoregressive model, this method reproduces the seasonal autocorrelation structure, as opposed to assuming the strict stationarity produced by an autoregressive model. Such urban-to-urban transfers are designed to be rare, transient events used primarily during times of severe drought, and incorporating Monte Carlo techniques allows for the development of probability distributions of likely outcomes. This research evaluates a system risk-based, urban-to-urban transfer agreement between three utilities in the Triangle region of North Carolina. Two utilities maintain their own surface water supplies in adjoining watersheds and look to obtain transfers via interconnections to a third utility with access to excess supply. The stochastic generation method is adapted to maintain the cross-correlation of inflows between watersheds. Risk-based decision rules are developed to govern transfers based upon the current level of risk to the water supply. This work determines how expected transfer behavior changes under four future climate scenarios assuming several different risk-thresholds.

Production and Optimization of Direct Coal Liquefaction derived Low Carbon-Footprint Transportation Fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Markovich

This report summarizes works conducted under DOE Contract No. DE-FC26-05NT42448. The work scope was divided into two categories - (a) experimental program to pretreat and refine a coal derived syncrude sample to meet transportation fuels requirements; (b) system analysis of a commercial scale direct coal liquefaction facility. The coal syncrude was derived from a bituminous coal by Headwaters CTL, while the refining study was carried out under a subcontract to Axens North America. The system analysis included H{sub 2} production cost via six different options, conceptual process design, utilities requirements, CO{sub 2} emission and overall plant economy. As part ofmore » the system analysis, impact of various H{sub 2} production options was evaluated. For consistence the comparison was carried out using the DOE H2A model. However, assumptions in the model were updated using Headwaters database. Results of Tier 2 jet fuel specifications evaluation by the Fuels & Energy Branch, US Air Force Research Laboratory (AFRL/RZPF) located at Wright Patterson Air Force Base (Ohio) are also discussed in this report.« less

Folding Proteins at 500 ns/hour with Work Queue.

PubMed

Abdul-Wahid, Badi'; Yu, Li; Rajan, Dinesh; Feng, Haoyun; Darve, Eric; Thain, Douglas; Izaguirre, Jesús A

2012-10-01

Molecular modeling is a field that traditionally has large computational costs. Until recently, most simulation techniques relied on long trajectories, which inherently have poor scalability. A new class of methods is proposed that requires only a large number of short calculations, and for which minimal communication between computer nodes is required. We considered one of the more accurate variants called Accelerated Weighted Ensemble Dynamics (AWE) and for which distributed computing can be made efficient. We implemented AWE using the Work Queue framework for task management and applied it to an all atom protein model (Fip35 WW domain). We can run with excellent scalability by simultaneously utilizing heterogeneous resources from multiple computing platforms such as clouds (Amazon EC2, Microsoft Azure), dedicated clusters, grids, on multiple architectures (CPU/GPU, 32/64bit), and in a dynamic environment in which processes are regularly added or removed from the pool. This has allowed us to achieve an aggregate sampling rate of over 500 ns/hour. As a comparison, a single process typically achieves 0.1 ns/hour.

Folding Proteins at 500 ns/hour with Work Queue

PubMed Central

Abdul-Wahid, Badi’; Yu, Li; Rajan, Dinesh; Feng, Haoyun; Darve, Eric; Thain, Douglas; Izaguirre, Jesús A.

2014-01-01

Molecular modeling is a field that traditionally has large computational costs. Until recently, most simulation techniques relied on long trajectories, which inherently have poor scalability. A new class of methods is proposed that requires only a large number of short calculations, and for which minimal communication between computer nodes is required. We considered one of the more accurate variants called Accelerated Weighted Ensemble Dynamics (AWE) and for which distributed computing can be made efficient. We implemented AWE using the Work Queue framework for task management and applied it to an all atom protein model (Fip35 WW domain). We can run with excellent scalability by simultaneously utilizing heterogeneous resources from multiple computing platforms such as clouds (Amazon EC2, Microsoft Azure), dedicated clusters, grids, on multiple architectures (CPU/GPU, 32/64bit), and in a dynamic environment in which processes are regularly added or removed from the pool. This has allowed us to achieve an aggregate sampling rate of over 500 ns/hour. As a comparison, a single process typically achieves 0.1 ns/hour. PMID:25540799

Sample preparation composite and replicate strategy case studies for assay of solid oral drug products.

PubMed

Nickerson, Beverly; Harrington, Brent; Li, Fasheng; Guo, Michele Xuemei

2017-11-30

Drug product assay is one of several tests required for new drug products to ensure the quality of the product at release and throughout the life cycle of the product. Drug product assay testing is typically performed by preparing a composite sample of multiple dosage units to obtain an assay value representative of the batch. In some cases replicate composite samples may be prepared and the reportable assay value is the average value of all the replicates. In previously published work by Harrington et al. (2014) [5], a sample preparation composite and replicate strategy for assay was developed to provide a systematic approach which accounts for variability due to the analytical method and dosage form with a standard error of the potency assay criteria based on compendia and regulatory requirements. In this work, this sample preparation composite and replicate strategy for assay is applied to several case studies to demonstrate the utility of this approach and its application at various stages of pharmaceutical drug product development. Copyright © 2017 Elsevier B.V. All rights reserved.

Vehicle accidents at maintenance and utility work zones.

DOT National Transportation Integrated Search

1978-01-01

The objective of this study was to determine the magnitude and characteristics of safety problems, in terms of reported accidents, that are associated with moving vehicular traffic around and through highway maintenance and utility work zones. This w...

Returning to work following low back pain: towards a model of individual psychosocial factors.

PubMed

Besen, Elyssa; Young, Amanda E; Shaw, William S

2015-03-01

The aim of this paper is to develop and test a model of direct and indirect relationships among individual psychosocial predictors of return-to-work (RTW) outcomes following the onset of low back pain (LBP). We utilize secondary analysis of a larger study of adults seeking treatment for work-related LBP with recent onset. In total, 241 participants who completed a baseline survey, a short follow-up survey, and a longer follow-up survey after 3 months were included in our analyses. The participants were required to have LBP with onset of less than 14 days, be 18 years or older, and be fluent in English or Spanish. The analyses utilized structural equation models to test the direct and indirect relationships among the variables and RTW outcomes at 3 months. Our results indicated a good fit for our model (χ2 = 69.59, df = 45, p < .05; RMSEA = .05; CFI = .95; WRMR = .61). Pain, catastrophizing, fear-avoidance beliefs, organizational support, and RTW confidence were all found to have indirect relationships with the outcomes. RTW confidence and RTW expectations were found to have direct relationships with the outcomes. The process of returning to work after an episode of LBP is a complex process involving many interrelated factors. Understanding the relationships among critical individual factors in the RTW process may be important for the treatment and rehabilitation of those with LBP. Results suggest that if injured workers are struggling with fear avoidance, pain catastrophizing and confidence issues, they might benefit from the application of cognitive behavioral therapy techniques.

Navigating Financial and Supply Reliability Tradeoffs in Regional Drought Portfolios

NASA Astrophysics Data System (ADS)

Zeff, H. B.; Herman, J. D.; Characklis, G. W.; Reed, P. M.

2013-12-01

Rising development costs and growing concerns over environmental impacts have led many communities to explore more diversified regional portfolio-type approaches to managing their water supplies. These strategies coordinate existing supply infrastructure with other ';assets' such as conservation measures or water transfers, reducing the capacity and costs required to meet demand by providing greater adaptability to changing hydrologic conditions. For many water utilities, however, this additional flexibility can also cause unexpected reductions in revenue (i.e. conservation) or increased costs (i.e. transfers), fluctuations that can be very difficult for a regulated entity to manage. Thus, despite the advantages, concerns over the resulting financial disruptions provide a disincentive for utilities to develop more adaptive methods, potentially limiting the role of some very effective tools. This study seeks to design portfolio strategies that employ financial instruments (e.g. contingency funds, index insurance) to reduce fluctuations in revenues and costs and therefore do not sacrifice financial stability for improved performance (e.g. lower expected costs, high reliability). This work describes the development of regional water supply portfolios in the ';Research Triangle' region of North Carolina, an area comprising four rapidly growing municipalities supplied by nine surface water reservoirs in two separate river basins. Disparities in growth rates and the respective individual storage capacities of the reservoirs provide the region with the opportunity to increase the efficiency of the regional supply infrastructure through inter-utility water transfers, even as each utility engages in its own conservation activities. The interdependence of multiple utilities navigating shared conveyance and treatment infrastructure to engage in transfers forces water managers to consider regional objectives, as the actions of any one utility can affect the others. Results indicate the inclusion of inter-utility water transfers allows the water utilities to improve on regional operational objectives (i.e. higher reliability and lower restriction frequencies) at a lower expected cost, while financial mitigation tools introduce a tradeoff between expected costs and cost variability. Financial mitigation schemes, including both third-party financial insurance contracts and contingency funds (i.e. self-insurance), were able to reduce cost variability at a lower expected cost than mitigation schemes which use self-insurance alone. The dynamics of the Research Triangle scenario (e.g. rapid population growth, constrained supply, and sensitivity to cost/revenue swings) suggest that this work may have the potential to more generally inform utilities on the effects of coordinated regional water supply planning and the resulting financial implications of more flexible, portfolio-type management techniques.

Weather Prediction Improvement Using Advanced Satellite Technology

NASA Technical Reports Server (NTRS)

Einaudi, Franco; Uccellini, L.; Purdom, J.; Rogers, D.; Gelaro, R.; Dodge, J.; Atlas, R.; Lord, S.

2001-01-01

We discuss in this paper some of the problems that exist today in the fall utilization of satellite data to improve weather forecasts and we propose specific recommendations to solve them. This discussion can be viewed as an aspect of the general debate on how best to organize the transition from research to operational satellites and how to evaluate the impact of a research instrument on numerical weather predictions. A method for providing this transition is offered by the National Polar-Orbiting Operational Environmental Satellite System (NPOESS) Preparatory Project (NPP). This mission will bridge the time between the present NOAA and Department of Defense (DOD) polar orbiting missions and the initiation of the converged NPOESS series and will evaluate some of the Earth Observing System (EOS) instruments as appropriate for operational missions. Thus, this mission can be viewed as an effort to meet the operational requirements of NOAA and DOD and the research requirements of NASA. More generally, however, it can be said that the process of going from the conception of new, more advanced instruments to their operational implementation and full utilization by the weather forecast communities is not optimal. Instruments developed for research purposes may have insufficient funding to explore their potential operational capabilities. Furthermore, instrument development programs designed for operational satellites typically have insufficient funding for assimilation algorithms needed to transform the satellite observations into data that can be used by sophisticated global weather forecast models. As a result, years often go by before satellite data are efficiently used for operational forecasts. NASA and NOAA each have unique expertise in the design of satellite instruments, their use for basic and applied research and their utilization in weather and climate research. At a time of limited resources, the two agencies must combine their efforts to work toward common goals of full utilization of satellite data. This is a challenge that requires the assimilation of myriad new data into increasingly sophisticated numerical forecast models that run on increasingly sophisticated computer systems. In section II, we briefly outline the impact of satellite data on the quality of the National Centers for Environmental Prediction (NCEP) forecasts. In section III, we describe the present status of the utilization of satellite data in NCEP models and the challenges that lie ahead. In section IV, we propose solutions whose goals are summarized in section V.

Lessons Learned from Deploying an Analytical Task Management Database

NASA Technical Reports Server (NTRS)

O'Neil, Daniel A.; Welch, Clara; Arceneaux, Joshua; Bulgatz, Dennis; Hunt, Mitch; Young, Stephen

2007-01-01

Defining requirements, missions, technologies, and concepts for space exploration involves multiple levels of organizations, teams of people with complementary skills, and analytical models and simulations. Analytical activities range from filling a To-Be-Determined (TBD) in a requirement to creating animations and simulations of exploration missions. In a program as large as returning to the Moon, there are hundreds of simultaneous analysis activities. A way to manage and integrate efforts of this magnitude is to deploy a centralized database that provides the capability to define tasks, identify resources, describe products, schedule deliveries, and generate a variety of reports. This paper describes a web-accessible task management system and explains the lessons learned during the development and deployment of the database. Through the database, managers and team leaders can define tasks, establish review schedules, assign teams, link tasks to specific requirements, identify products, and link the task data records to external repositories that contain the products. Data filters and spreadsheet export utilities provide a powerful capability to create custom reports. Import utilities provide a means to populate the database from previously filled form files. Within a four month period, a small team analyzed requirements, developed a prototype, conducted multiple system demonstrations, and deployed a working system supporting hundreds of users across the aeros pace community. Open-source technologies and agile software development techniques, applied by a skilled team enabled this impressive achievement. Topics in the paper cover the web application technologies, agile software development, an overview of the system's functions and features, dealing with increasing scope, and deploying new versions of the system.

Manpower studies for the United States. Part II. Demand for eye care. A public opinion poll based upon a Gallup poll survey.

PubMed

Reinecke, R D; Steinberg, T

1981-04-01

This is the second in the series of Ophthalmology Manpower Studies. Part I presented estimates of disease prevalence and incidence, the average amount of time required to care for such conditions, and based on that information, the total hours of ophthalmological services required to care for all the projected need in the population. Using different estimates of the average number of hours worked per year per ophthalmologist (based on a 35, 40 and 48 hours/week in patient care), estimates of the total number of ophthalmologists required were calculated. This method is basically similar to the method later adopted by the Graduate Medical Education National Advisory Committee (GMENAC) to arrive at estimates of hours of ophthalmological services required for 1990. However, instead of using all the need present in the population, the GMENAC panel chose to use an "adjusted-needs based" model as a compromise between total need and actual utilization, the former being an overestimation and the latter being an underestimation since it is in part a function of the barriers to medical care. Since some of these barriers to medical care include informational factors, as well as availability and accessibility, this study was undertaken to assess the utilization of these services and the adequacy of present ophthalmological manpower in the opinion of the consumer. Also, since the consumer's choice or behavior depends on being informed about the differences between optometrists and ophthalmologists, such knowledge was assessed and the responses further evaluated after explanatory statements were made to the responders.

Road map to Title I of the Public Utility Regulatory Policies Act of 1978

DOE Office of Scientific and Technical Information (OSTI.GOV)

Partridge, W.

1979-01-18

Within the next two years all electric utilities retailing over 500 million kilowatts per year will be forced into rate-making proceedings or public hearings to meet the requirements of Title I of the Public Utility Regulatory Policies Act of 1978. In these proceedings they will be required to consider the application of Federal requirements for lifeline rates, class rates based on cost of service, declining block rates, time-of-day rates, seasonal rates, interruptible rates, load management techniques, prohibitions on master metering, restrictions on use of automatic adjustment clauses, provision of consumer information, termination procedures, and restrictions on advertising. The act hasmore » immediate, significant implications for electric utility management.« less

Engaging in psychotherapy with the Orthodox Jew: a critical review.

PubMed

Margolese, H C

1998-01-01

A critical overview of the current knowledge of engaging in psychotherapy with a cultural minority, Orthodox Jews, is provided. The various forms of psychotherapy that have been utilized to engage Orthodox Jews in meaningful psychotherapeutic encounters are discussed. Psychodynamic, cognitive, behavioral, couple, family, and group therapies have all been employed with success. The first key in working with cultural minorities, including Orthodox Jews, is patience. Patience is required to allow a therapeutic alliance to develop in which the therapist, the outsider, can be trusted. When patients are reluctant to accept the treatment proposed, patience is necessary to give them the time required to verify the treatment with someone they trust, often their rabbi in the case of the Orthodox Jew. Patience is also valuable when patients request a change in the frame of therapy, such as the use of a chaperon or leaving the door slightly ajar if being treated by a member of the opposite sex. The second key in working with this or any other cultural minority is flexibility. Flexibility is required, to chose treatment modalities that best fit with the patient's beliefs, to respect the patient's beliefs no matter the extent they deviate from the therapist's own, and finally, to be critical of oneself when examining transference and countertransference reactions.

Capturing the Impact of Storage and Other Flexible Technologies on Electric System Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, Elaine; Stoll, Brady; Mai, Trieu

Power systems of the future are likely to require additional flexibility. This has been well studied from an operational perspective, but has been more difficult to incorporate into capacity expansion models (CEMs) that study investment decisions on the decadal scale. There are two primary reasons for this. First, the necessary input data, including cost and resource projections, for flexibility options like demand response and storage are significantly uncertain. Second, it is computationally difficult to represent both investment and operational decisions in detail, the latter being necessary to properly value system flexibility, in CEMs for realistically sized systems. In this work,more » we extend a particular CEM, NREL's Resource Planning Model (RPM), to address the latter issue by better representing variable generation impacts on operations, and then adding two flexible technologies to RPM's suite of investment decisions: interruptible load and utility-scale storage. This work does not develop full suites of input data for these technologies, but is rather methodological and exploratory in nature. We thus exercise these new investment decisions in the context of exploring price points and value streams needed for significant deployment in the Western Interconnection by 2030. Our study of interruptible load finds significant variation by location, year, and overall system conditions. Some locations find no system need for interruptible load even with low costs, while others build the most expensive resources offered. System needs can include planning reserve capacity needs to ensure resource adequacy, but there are also particular cases in which spinning reserve requirements drive deployment. Utility-scale storage is found to require deep cost reductions to achieve wide deployment and is found to be more valuable in some locations with greater renewable deployment. Differences between more solar- and wind-reliant regions are also found: Storage technologies with lower energy capacities are deployed to support solar deployment, and higher energy capacity technologies support wind. Finally, we identify potential future research and areas of improvement to build on this initial analysis.« less

How important are autonomy and work setting to nurse practitioners' job satisfaction?

PubMed

Athey, Erin K; Leslie, Mayri Sagady; Briggs, Linda A; Park, Jeongyoung; Falk, Nancy L; Pericak, Arlene; El-Banna, Majeda M; Greene, Jessica

2016-06-01

Nurse practitioners (NPs) have reported aspects of their jobs that they are more and less satisfied with. However, few studies have examined the factors that predict overall job satisfaction. This study uses a large national sample to examine the extent to which autonomy and work setting predict job satisfaction. The 2012 National Sample Survey of Nurse Practitioners (n = 8311) was used to examine bivariate and multivariate relationships between work setting and three autonomy variables (independent billing practices, having one's NP skills fully utilized, and relationship with physician), and job satisfaction. NPs working in primary care reported the highest levels of autonomy across all three autonomy measures, while those working in hospital surgical settings reported the lowest levels. Autonomy, specifically feeling one's NP skills were fully utilized, was the factor most predictive of satisfaction. In multivariate analyses, those who strongly agreed their skills were being fully utilized had satisfaction scores almost one point higher than those who strongly disagreed. Work setting was only marginally related to job satisfaction. In order to attract and retain NPs in the future, healthcare organizations should ensure that NPs' skills are being fully utilized. ©2015 American Association of Nurse Practitioners.

The association between rurality and return to work for workers' compensation claimants with work-related musculoskeletal injuries: An analysis of workers who failed to return to work within typical healing time frames.

PubMed

Lavoie, Callum A; Voaklander, Don; Beach, Jeremy R; Gross, Douglas P

2017-07-14

The objectives of this study have been to: 1) describe and compare urban and rural injured worker populations in Alberta, Canada; 2) identify return-to-work outcomes in urban and rural populations; 3) examine the relationship between geographic location of residence and recovery from work-related musculoskeletal injury; and 4) investigate if this relationship is attenuated after controlling for other known risk factors. This study was a secondary analysis utilizing data of a population of musculoskeletal injury claimants who underwent clinical/RTW (return to work) assessment between December 2009 and January 2011 collected by the Workers' Compensation Board of Alberta. Descriptive statistics were computed for 32 variables and used for comparing urban and rural workers. The logistic regression analysis was performed to test the association between geographic location of residence and likelihood of return-to-work. Data on 7843 claimants was included, 70.1% of them being urban and 29.9% - rural. Rural claimants tended to have spent less time in formal education, have a blue-collar job, have no modified work available, have a diagnosed comorbidity, and not been enrolled in a specialized rehabilitation program. They were 1.43 (1.12-1.84) times the odds more likely than urban claimants to be continuing to receive full disability benefits 90 days after their RTW assessment, and 1.68 (1.06-2.67) times the odds as likely to report a recurrence of receiving disability benefits. Rural residence was associated with prolonged work disability, even after controlling for age, job type, education level, health utilization and other potential confounders. Further research is required to explore why injured workers in rural settings experience prolonged reception of disability benefits and have greater rates of recurrence of receiving disability benefits. Int J Occup Med Environ Health 2017;30(5):715-729. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Automated Hazard Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riddle, F. J.

2003-06-26

The Automated Hazard Analysis (AHA) application is a software tool used to conduct job hazard screening and analysis of tasks to be performed in Savannah River Site facilities. The AHA application provides a systematic approach to the assessment of safety and environmental hazards associated with specific tasks, and the identification of controls regulations, and other requirements needed to perform those tasks safely. AHA is to be integrated into existing Savannah River site work control and job hazard analysis processes. Utilization of AHA will improve the consistency and completeness of hazard screening and analysis, and increase the effectiveness of the workmore » planning process.« less

SAGA: A project to automate the management of software production systems

NASA Technical Reports Server (NTRS)

Campbell, R. H.

1983-01-01

The current work in progress for the SAGA project are described. The highlights of this research are: a parser independent SAGA editor, design for the screen editing facilities of the editor, delivery to NASA of release 1 of Olorin, the SAGA parser generator, personal workstation environment research, release 1 of the SAGA symbol table manager, delta generation in SAGA, requirements for a proof management system, documentation for and testing of the cyber pascal make prototype, a prototype cyber-based slicing facility, a June 1984 demonstration plan, SAGA utility programs, summary of UNIX software engineering support, and theorem prover review.

Using stroboscopic flow imaging to validate large-scale computational fluid dynamics simulations

NASA Astrophysics Data System (ADS)

Laurence, Ted A.; Ly, Sonny; Fong, Erika; Shusteff, Maxim; Randles, Amanda; Gounley, John; Draeger, Erik

2017-02-01

The utility and accuracy of computational modeling often requires direct validation against experimental measurements. The work presented here is motivated by taking a combined experimental and computational approach to determine the ability of large-scale computational fluid dynamics (CFD) simulations to understand and predict the dynamics of circulating tumor cells in clinically relevant environments. We use stroboscopic light sheet fluorescence imaging to track the paths and measure the velocities of fluorescent microspheres throughout a human aorta model. Performed over complex physiologicallyrealistic 3D geometries, large data sets are acquired with microscopic resolution over macroscopic distances.

Experience with modified aerospace reliability and quality assurance method for wind turbines

NASA Technical Reports Server (NTRS)

Klein, W. E.

1982-01-01

The SR&QA approach assures that the machine is not hazardous to the public or operating personnel, can operate unattended on a utility grid, demonstrates reliability operation, and helps establish the quality assurance and maintainability requirements for future wind turbine projects. The approach consisted of modified failure modes and effects analysis (FMEA) during the design phase, minimal hardware inspection during parts fabrication, and three simple documents to control activities during machine construction and operation. Five years experience shows that this low cost approach works well enough that it should be considered by others for similar projects.

Polar communications: Status and recommendations. Report of the Science Working Group

NASA Technical Reports Server (NTRS)

Rosenberg, T. J. (Editor); Jezek, K. C. (Editor)

1987-01-01

The capabilities of the existing communication links within the polar regions, as well as between the polar regions and the continental United States, are summarized. These capabilities are placed in the context of the principal scientific disciplines that are active in polar research, and in the context of how scientists both utilize and are limited by present technologies. Based on an assessment of the scientific objectives potentially achievable with improved communication capabilities, a list of requirements on and recommendations for communication capabilities necessary to support polar science over the next ten years is given.

Controlling the type and the form of chip when machining steel

NASA Astrophysics Data System (ADS)

Gruby, S. V.; Lasukov, A. A.; Nekrasov, R. Yu; Politsinsky, E. V.; Arkhipova, D. A.

2016-08-01

The type of the chip produced in the process of machining influences many factors of production process. Controlling the type of chip when cutting metals is important for producing swarf chips and for easing its utilization as well as for protecting the machined surface, cutting tool and the worker. In the given work we provide the experimental data on machining structural steel with implanted tool. The authors show that it is possible to control the chip formation process to produce the required type of chip by selecting the material for machining the tool surface.

Probabilistic Fatigue Damage Prognosis Using a Surrogate Model Trained Via 3D Finite Element Analysis

NASA Technical Reports Server (NTRS)

Leser, Patrick E.; Hochhalter, Jacob D.; Newman, John A.; Leser, William P.; Warner, James E.; Wawrzynek, Paul A.; Yuan, Fuh-Gwo

2015-01-01

Utilizing inverse uncertainty quantification techniques, structural health monitoring can be integrated with damage progression models to form probabilistic predictions of a structure's remaining useful life. However, damage evolution in realistic structures is physically complex. Accurately representing this behavior requires high-fidelity models which are typically computationally prohibitive. In the present work, a high-fidelity finite element model is represented by a surrogate model, reducing computation times. The new approach is used with damage diagnosis data to form a probabilistic prediction of remaining useful life for a test specimen under mixed-mode conditions.

Partial information decomposition as a spatiotemporal filter.

PubMed

Flecker, Benjamin; Alford, Wesley; Beggs, John M; Williams, Paul L; Beer, Randall D

2011-09-01

Understanding the mechanisms of distributed computation in cellular automata requires techniques for characterizing the emergent structures that underlie information processing in such systems. Recently, techniques from information theory have been brought to bear on this problem. Building on this work, we utilize the new technique of partial information decomposition to show that previous information-theoretic measures can confound distinct sources of information. We then propose a new set of filters and demonstrate that they more cleanly separate out the background domains, particles, and collisions that are typically associated with information storage, transfer, and modification in cellular automata.

Space power system utilizing Fresnel lenses for solar power and also thermal energy storage

NASA Technical Reports Server (NTRS)

Turner, R. H.

1983-01-01

A solar power plant suitable for earth orbits passing through Van Allen radiation belts is described. The solar-to-electricity conversion efficiency is estimated to be around 9 percent, and the expected power-to-weight ratio is competitive with photovoltaic arrays. The system is designed to be self-contained, to be indifferent to radiation belt exposures, store energy for periods when the orbiting system is in earth shadow (so that power generation is contant), have no moving parts and no working fluids, and be robust against micrometeorite attack. No electrical batteries are required.

TEJAS - TELEROBOTICS/EVA JOINT ANALYSIS SYSTEM VERSION 1.0

NASA Technical Reports Server (NTRS)

Drews, M. L.

1994-01-01

The primary objective of space telerobotics as a research discipline is the augmentation and/or support of extravehicular activity (EVA) with telerobotic activity; this allows increased emplacement of on-orbit assets while providing for their "in situ" management. Development of the requisite telerobot work system requires a well-understood correspondence between EVA and telerobotics that to date has been only partially established. The Telerobotics/EVA Joint Analysis Systems (TEJAS) hypermedia information system uses object-oriented programming to bridge the gap between crew-EVA and telerobotics activities. TEJAS Version 1.0 contains twenty HyperCard stacks that use a visual, customizable interface of icon buttons, pop-up menus, and relational commands to store, link, and standardize related information about the primitives, technologies, tasks, assumptions, and open issues involved in space telerobot or crew EVA tasks. These stacks are meant to be interactive and can be used with any database system running on a Macintosh, including spreadsheets, relational databases, word-processed documents, and hypermedia utilities. The software provides a means for managing volumes of data and for communicating complex ideas, relationships, and processes inherent to task planning. The stack system contains 3MB of data and utilities to aid referencing, discussion, communication, and analysis within the EVA and telerobotics communities. The six baseline analysis stacks (EVATasks, EVAAssume, EVAIssues, TeleTasks, TeleAssume, and TeleIssues) work interactively to manage and relate basic information which you enter about the crew-EVA and telerobot tasks you wish to analyze in depth. Analysis stacks draw on information in the Reference stacks as part of a rapid point-and-click utility for building scripts of specific task primitives or for any EVA or telerobotics task. Any or all of these stacks can be completely incorporated within other hypermedia applications, or they can be referenced as is, without requiring data to be transferred into any other database. TEJAS is simple to use and requires no formal training. Some knowledge of HyperCard is helpful, but not essential. All Help cards printed in the TEJAS User's Guide are part of the TEJAS Help Stack and are available from a pop-up menu any time you are using TEJAS. Specific stacks created in TEJAS can be exchanged between groups, divisions, companies, or centers for complete communication of fundamental information that forms the basis for further analyses. TEJAS runs on any Apple Macintosh personal computer with at least one megabyte of RAM, a hard disk, and HyperCard 1.21, or later version. TEJAS is a copyrighted work with all copyright vested in NASA. HyperCard and Macintosh are registered trademarks of Apple Computer, Inc.

Alternative Fuels Data Center

Science.gov Websites

Utility Company Electric Vehicle (EV) Charging Load Projection Requirement The Public Utilities Regulatory Authority requires electric distribution companies to integrate EV charging load projections into the EV charging load projections for the company's distribution planning. (Reference Connecticut

7 CFR 1770.26 - General.

Code of Federal Regulations, 2011 CFR

2011-01-01

... (CONTINUED) ACCOUNTING REQUIREMENTS FOR RUS TELECOMMUNICATIONS BORROWERS Accounting Interpretations § 1770.26 General. (a) The standard provisions of the security instruments utilized by the Rural Utilities Service (RUS) and the Rural Telephone Bank (RTB) for all telecommunications borrowers require borrowers to at...

[Application of multiple-attribute utility technology (MAUT) to decisions about a work-site stress-control intervention for public-sector office workers].

PubMed

Hagihara, Akihito; Tarumi, Kimio

2013-01-01

The reasons behind the establishment of particular health-promotion programs in community or work settings are often unclear, and such programs are rarely evaluated from a broad perspective after they are implemented. Thus, multiattribute utility technology (MAUT) was used to design a work-site stress-control program. The sample consisted of public-sector workers in B City in Japan. Stakeholders in the work-site stress-control program included employers (municipal authorities), employees (public workers), and healthcare personnel. Six goals and three strategies (i.e., personnel, self-care, and staff) related to stress-control programs were considered. The results showed that the self-care strategy received the highest score for overall utility (i.e., 96.2), and the overall-utility score for the remaining two strategies was approximately 70. The self-care strategy emerged as the most useful of the three strategies for developing a stress-control program in a target work place. The application of MAUT may be useful for developing an effective stress-control program in occupational settings.

42 CFR 456.150 - Scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ASSISTANCE PROGRAMS UTILIZATION CONTROL Utilization Control: Mental Hospitals § 456.150 Scope. This subpart prescribes requirements for control of utilization of inpatient services in mental hospitals, including...

Burden of uncontrolled epilepsy in patients requiring an emergency room visit or hospitalization.

PubMed

Manjunath, Ranjani; Paradis, Pierre Emmanuel; Parisé, Hélène; Lafeuille, Marie-Hélène; Bowers, Brian; Duh, Mei Sheng; Lefebvre, Patrick; Faught, Edward

2012-10-30

To quantify the clinical and economic burden of uncontrolled epilepsy in patients requiring emergency department (ED) visit or hospitalization. Health insurance claims from a 5-state Medicaid database (1997Q1-2009Q2) and 55 self-insured US companies ("employer," 1999Q1 and 2008Q4) were analyzed. Adult patients with epilepsy receiving antiepileptic drugs (AED) were selected. Using a retrospective matched-cohort design, patients were categorized into cohorts of "uncontrolled" (≥ 2 changes in AED therapy, then ≥ 1 epilepsy-related ED visit/hospitalization within 1 year) and "well-controlled" (no AED change, no epilepsy-related ED visit/hospitalization) epilepsy. Matched cohorts were compared for health care resource utilization and costs using multivariate conditional regression models and nonparametric methods. From 110,312 (Medicaid) and 36,529 (employer) eligible patients, 3,454 and 602 with uncontrolled epilepsy were matched 1:1 to patients with well-controlled epilepsy, respectively. In both populations, uncontrolled epilepsy cohorts presented about 2 times more fractures and head injuries (all p values < 0.0001) and higher health care resource utilization (ranges of adjusted incidence rate ratios [IRRs] [all-cause utilization]: AEDs = 1.8-1.9, non-AEDs = 1.3-1.5, hospitalizations = 5.4-6.7, length of hospital stays = 7.3-7.7, ED visits = 3.7-5.0, outpatient visits = 1.4-1.7, neurologist visits = 2.3-3.1; all p values < 0.0001) than well-controlled groups. Total direct health care costs were higher in patients with uncontrolled epilepsy (adjusted cost difference [95% confidence interval (CI)] Medicaid = $12,258 [$10,482-$14,083]; employer = $14,582 [$12,019-$17,097]) vs well-controlled patients. Privately insured employees with uncontrolled epilepsy lost 2.5 times more work days, with associated indirect costs of $2,857 (95% CI $1,042-$4,581). Uncontrolled epilepsy in patients requiring ED visit or hospitalization was associated with significantly greater health care resource utilization and increased direct and indirect costs compared to well-controlled epilepsy in both publicly and privately insured settings.

Utilization of Navy Selected Reserve Personnel in Defense Contract Management Command Reserve Units

DTIC Science & Technology

1993-06-17

and gaining commands reporting sound working relationships tended to agree not only on current utilization, but future utilization as wel]. This...QiISLI 5 ousin9. Ay te iisues Upositive or- ngegativej. concgrriing. Naval Reserve part icipatioContract~ S Managmnt ? This question wag designed as a...working relationship with their gaining command tended to fit into the satisfied category. However, those units which indicated a somewhat strained

Reducing regional vulnerabilities and multi-city robustness conflicts using many-objective optimization under deep uncertainty

NASA Astrophysics Data System (ADS)

Reed, Patrick; Trindade, Bernardo; Jonathan, Herman; Harrison, Zeff; Gregory, Characklis

2016-04-01

Emerging water scarcity concerns in southeastern US are associated with several deeply uncertain factors, including rapid population growth, limited coordination across adjacent municipalities and the increasing risks for sustained regional droughts. Managing these uncertainties will require that regional water utilities identify regionally coordinated, scarcity-mitigating strategies that trigger the appropriate actions needed to avoid water shortages and financial instabilities. This research focuses on the Research Triangle area of North Carolina, seeking to engage the water utilities within Raleigh, Durham, Cary and Chapel Hill in cooperative and robust regional water portfolio planning. Prior analysis of this region through the year 2025 has identified significant regional vulnerabilities to volumetric shortfalls and financial losses. Moreover, efforts to maximize the individual robustness of any of the mentioned utilities also have the potential to strongly degrade the robustness of the others. This research advances a multi-stakeholder Many-Objective Robust Decision Making (MORDM) framework to better account for deeply uncertain factors when identifying cooperative management strategies. Results show that the sampling of deeply uncertain factors in the computational search phase of MORDM can aid in the discovery of management actions that substantially improve the robustness of individual utilities as well as the overall region to water scarcity. Cooperative water transfers, financial risk mitigation tools, and coordinated regional demand management must be explored jointly to decrease robustness conflicts between the utilities. The insights from this work have general merit for regions where adjacent municipalities can benefit from cooperative regional water portfolio planning.

Reducing regional vulnerabilities and multi-city robustness conflicts using many-objective optimization under deep uncertainty

NASA Astrophysics Data System (ADS)

Trindade, B. C.; Reed, P. M.; Herman, J. D.; Zeff, H. B.; Characklis, G. W.

2015-12-01

Emerging water scarcity concerns in southeastern US are associated with several deeply uncertain factors, including rapid population growth, limited coordination across adjacent municipalities and the increasing risks for sustained regional droughts. Managing these uncertainties will require that regional water utilities identify regionally coordinated, scarcity-mitigating strategies that trigger the appropriate actions needed to avoid water shortages and financial instabilities. This research focuses on the Research Triangle area of North Carolina, seeking to engage the water utilities within Raleigh, Durham, Cary and Chapel Hill in cooperative and robust regional water portfolio planning. Prior analysis of this region through the year 2025 has identified significant regional vulnerabilities to volumetric shortfalls and financial losses. Moreover, efforts to maximize the individual robustness of any of the mentioned utilities also have the potential to strongly degrade the robustness of the others. This research advances a multi-stakeholder Many-Objective Robust Decision Making (MORDM) framework to better account for deeply uncertain factors when identifying cooperative management strategies. Results show that the sampling of deeply uncertain factors in the computational search phase of MORDM can aid in the discovery of management actions that substantially improve the robustness of individual utilities as well as of the overall region to water scarcity. Cooperative water transfers, financial risk mitigation tools, and coordinated regional demand management should be explored jointly to decrease robustness conflicts between the utilities. The insights from this work have general merit for regions where adjacent municipalities can benefit from cooperative regional water portfolio planning.

Strategies to encourage and facilitate utility owner participation in transportation projects : guidebook.

DOT National Transportation Integrated Search

2012-11-01

Utility accommodation policies around the country provide minimum requirements for the accommodation, adjustment, and maintenance of utility facilities within the highway right of way. Many state rules and guidelines are based on utility accommodatio...

48 CFR 970.5232-6 - Work for others funding authorization.

Code of Federal Regulations, 2010 CFR

2010-10-01

... uncollectible receivables resulting from the Contractor utilizing contractor corporate funding for reimbursable... provide advance payment utilizing contractor corporate funds for reimbursable work to be performed by the... Laws, regulations, and DOE directives clause of this contract and such advance cannot be obtained. The...

Study Acoustic Emissions from Composites

NASA Technical Reports Server (NTRS)

Walker, James L.; Workman, Gary L.

1997-01-01

The nondestructive evaluation (NDE) of future propulsion systems utilizing advanced composite structures for the storage of cryogenic fuels, such as liquid hydrogen or oxygen, presents many challenges. Economic justification for these structures requires, light weight, reusable components with an infrastructure allowing periodic evaluation of structural integrity after enduring demanding stresses during operation. A major focus has been placed on the use of acoustic emission NDE to detect propagating defects, in service, necessitating an extensive study into characterizing the nature of acoustic signal propagation at very low temperatures and developing the methodology of applying AE sensors to monitor cryogenic components. This work addresses the question of sensor performance in the cryogenic environment. Problems involving sensor mounting, spectral response and durability are addressed. The results of this work provides a common point of measure from which sensor selection can be made when testing composite components at cryogenic temperatures.

Exploration Medical System Technical Development

NASA Technical Reports Server (NTRS)

McGuire, K.; Middour, C.; Cerro, J.; Burba, T.; Hanson, A.; Reilly, J.; Mindock, J.

2017-01-01

The Exploration Medical Capability (ExMC) Element systems engineering goals include defining the technical system needed to implement exploration medical capabilities for Mars. This past year, scenarios captured in the medical system concept of operations laid the foundation for systems engineering technical development work. The systems engineering team analyzed scenario content to identify interactions between the medical system, crewmembers, the exploration vehicle, and the ground system. This enabled the definition of functions the medical system must provide and interfaces to crewmembers and other systems. These analyses additionally lead to the development of a conceptual medical system architecture. The work supports the ExMC community-wide understanding of the functional exploration needs to be met by the medical system, the subsequent development of medical system requirements, and the system verification and validation approach utilizing terrestrial analogs and precursor exploration missions.

Nonadiabatic tapered optical fiber sensor for measuring interaction nicotine with DNA

NASA Astrophysics Data System (ADS)

Zibaii, M. I.; Latifi, H.; Pourbeyram, H.; Gholami, M.; Taghipour, Z.; Saeedian, Z.; Hosseini, S. M.

2011-05-01

A nonadiabatic tapered optical fiber sensor was utilized for studying of bimolecular interactions including DNA-DNA and DNA-Drug interaction. This work presents a simple evanescent wave sensing system based on an interferometric approach, suitable to meet the requirements of lable-free sensor systems for detecting biomolecular interactions. We have demonstrated the measuring refractive index and the real time detection of interactions between biomolecules. Furthermore basic experiments were carried out, for detecting the hybridization of 25-mer DNA with an immobilized counterpart on the surface. The overall shift after the successful DNA hybridization was 9.5 nm. In this work, a new approach for studying DNA-drug interactions was successfully tested. Nicotine as a carcinogenic compound in cigarette smoke plays an important role in interaction with DNA. Different concentrations of nicotine were applied to observe the Longmuir interaction with DNA.

Automated bot to optimize the use of resources in agriculture by introducing internet of things

NASA Astrophysics Data System (ADS)

Urlagunta, Nagaraju; Budati, Sravani; Sanjana, K.; Rammohan, A.

2017-11-01

On the advancement of shrewd gadgets, the internet is trough discussing the inciting system. IoT, sensors and actuators mix flawlessly with the earth; work together internationally with every one another through the web to achieve a particular errand. Remote wireless Network (WSN) can also incorporate to IoT in order to identify address the difficulties of consistent correspondence in between some things (e.g., people protests). The possibilities can be conveyed to the regale of local by creating advanced applications in transportation and coordination’s, medicinal services, agribusiness, shrewd condition. This exploration gives a structure of improving assets, (composts, bug sprays and physical work) in agribusiness using IoT. The things required in the usage of utilizations are likewise examined in this paper. This is known as FarmTech.

An analysis of the Research Team-Service User relationship from the Service User perspective: a consideration of 'The Three Rs' (Roles, Relations, and Responsibilities) for healthcare research organisations.

PubMed

Jordan, Melanie; Rowley, Emma; Morriss, Richard; Manning, Nick

2015-12-01

This article debates interview data from service users who engaged with the work of a Collaboration for Leadership in Applied Health Research and Care (CLAHRC). The evidence base, to date, concerning the nature of CLAHRC work at the frontline (i.e. What is it actually like to do CLAHRC work?) is meagre; thus, this article represents an original contribution to that literature. Further, this article analyses service users' participation in research - as members of the research team - and so contributes to the body of developing literature regarding involvement too. This article explores the nature of the Research Team-Service User relationship, plus associated roles, relations and responsibilities of collaborative health research. Qualitative social science research was undertaken in a health-care research organization utilizing interview method and a medical sociology and organizational sociology theoretical framework for analysis. Data utilized originate from a larger evaluation study that focuses on the CLAHRC as an iterative organization and explores members' experiences. There can be a disparity between initial expectations and actual experiences of involvement for service users. Therefore, as structured via 'The Three Rs' (Roles, Relations and Responsibilities), aspects of the relationship are evaluated (e.g. motivation, altruism, satisfaction, transparency, scope, feedback, communication, time). Regarding the inclusion of service users in health research teams, a careful consideration of 'The Three Rs' is required to ensure expectations match experiences. © 2014 John Wiley & Sons Ltd.

The work and recovery project: changing organizational culture and practice in New York City outpatient services.

PubMed

Pascaris, Alysia; Shields, Leslie Reed; Wolf, Jessica

2008-01-01

Complex and multiple barriers confront out-patient programs in promoting recovery and addressing mental health recipients' work-related goals. This article describes a focused organizational change project utilizing intensive consultation and technical assistance within five New York City outpatient psychiatric services. The project aimed to increase staff exposure to, understanding and use of work-related and recovery-based concepts to promote consumers' recovery and attainment of employment goals. Tailored assessment, curriculum delivery, and identification and implementation of change objectives were useful strategies in promoting change. This change model can serve to assist programs in their efforts to integrate new approaches and to better understand changes among leadership, staff and consumers, and changes in organizational culture and practice required to support a work and recovery-oriented service paradigm. The project experience suggests that adopting and embracing new practices takes time. Varied and incremental steps toward programmatic and operational changes can be significant and can reap authentic sustainable change occurring in the process of learning, experiencing, internalizing and adjusting to new methods of practice.

UNIVERSITY RESEARCH PROGRAMS IN ROBOTICS, TECHNOLOGIES FOR MICROELECTROMECHANICAL SYSTEMS IN DIRECTED STOCKPILE WORK RADIATION AND ENGINEERING CAMPAIGNS - 2005-06 FINAL ANNUAL REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

James S. Tulenko; Dean Schoenfeld; David Hintenlang

The research performed by the University of Florida (UF) is directed to the development of technologies that can be utilized at a micro-scale in varied environments. Work is focused on micro-scale energy systems, visualization, and mechanical devices. This work will impact the NNSA need related to micro-assembly operations. The URPR activities are executed in a University environment, yet many applications of the resulting technologies may be classified or highly restrictive in nature. The NNSA robotics technologists apply an NNSA needs focus to the URPR research, and actively work to transition relevant research into the deployment projects in which they aremore » involved. This provides a “Research to Development to Application” structure within which innovative research has maximum opportunity for impact without requiring URPR researchers to be involved in specific NNSA projects. URPR researchers need to be aware of the NNSA applications in order to ensure the research being conducted has relevance, the URPR shall rely upon the NNSA sites for direction.« less

Automated Work Packages Prototype: Initial Design, Development, and Evaluation. Light Water Reactor Sustainability Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna Helene; Ahmad Al Rashdan; Le Blanc, Katya Lee

The goal of the Automated Work Packages (AWP) project is to demonstrate how to enhance work quality, cost management, and nuclear safety through the use of advanced technology. The work described in this report is part of the digital architecture for a highly automated plant project of the technical program plan for advanced instrumentation, information, and control (II&C) systems technologies. This report addresses the DOE Milestone M2LW-15IN0603112: Describe the outcomes of field evaluations/demonstrations of the AWP prototype system and plant surveillance and communication framework requirements at host utilities. A brief background to the need for AWP research is provided, thenmore » two human factors field evaluation studies are described. These studies focus on the user experience of conducting a task (in this case a preventive maintenance and a surveillance test) while using an AWP system. The remaining part of the report describes an II&C effort to provide real time status updates to the technician by wireless transfer of equipment indications and a dynamic user interface.« less

42 CFR 456.205 - UR committee required.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false UR committee required. 456.205 Section 456.205 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Utilization Control: Mental Hospitals Ur Plan...

Technology evaluation of control/monitoring systems for MIUS application. [utility services management

NASA Technical Reports Server (NTRS)

Pringle, L. M., Jr.

1974-01-01

Potential ways of providing control and monitoring for the Modular Integrated Utility System (MIUS) program are elaborated. Control and monitoring hardware and operational systems are described. The requirements for the MIUS program and the development requirements are discussed.

Spacelab Mission Implementation Cost Assessment (SMICA)

NASA Technical Reports Server (NTRS)

Guynes, B. V.

1984-01-01

A total savings of approximately 20 percent is attainable if: (1) mission management and ground processing schedules are compressed; (2) the equipping, staffing, and operating of the Payload Operations Control Center is revised, and (3) methods of working with experiment developers are changed. The development of a new mission implementation technique, which includes mission definition, experiment development, and mission integration/operations, is examined. The Payload Operations Control Center is to relocate and utilize new computer equipment to produce cost savings. Methods of reducing costs by minimizing the Spacelab and payload processing time during pre- and post-mission operation at KSC are analyzed. The changes required to reduce costs in the analytical integration process are studied. The influence of time, requirements accountability, and risk on costs is discussed. Recommendation for cost reductions developed by the Spacelab Mission Implementation Cost Assessment study are listed.

Development of a nonazeotropic heat pump for crew hygiene water heating

NASA Technical Reports Server (NTRS)

Walker, David H.; Deming, Glenn I.

1991-01-01

A Phase 2 SBIR Program funded by the NASA Marshall Space Flight Center to develop a Nonazeotropic Heat Pump is described. The heat pump system which was designed, fabricated, and tested in the Foster-Miller laboratory, is capable of providing crew hygiene water heating for future manned missions. The heat pump utilizes a nonazeotropic refrigerant mixture which, in this application, provides a significant Coefficient of Performance improvement over a single-constituent working fluid. In order to take full advantage of the refrigerant mixture, compact tube-in-tube heat exchangers were designed. A high efficiency scroll compressor with a proprietary lubrication system was developed to meet the requirements of operation in zero-gravity. The prototype heat pump system consumes less than 200W of power compared to the alternative of electric cartridge heaters which would require 2 to 5 kW.

Personality trait level and change as predictors of health outcomes: findings from a national study of Americans (MIDUS).

PubMed

Turiano, Nicholas A; Pitzer, Lindsay; Armour, Cherie; Karlamangla, Arun; Ryff, Carol D; Mroczek, Daniel K

2012-01-01

Personality traits predict numerous health outcomes, but previous studies have rarely used personality change to predict health. The current investigation utilized a large national sample of 3,990 participants from the Midlife in the U.S. study (MIDUS) to examine if both personality trait level and personality change longitudinally predict 3 different health outcomes (i.e., self-rated physical health, self-reported blood pressure, and number of days limited at work or home due to physical health reasons) over a 10-year span. Each of the Big Five traits, except openness, predicted self-rated health. Change in agreeableness, conscientiousness, and extraversion also predicted self-rated health. Trait levels of conscientiousness and neuroticism level predicted self-reported blood pressure. All trait levels except agreeableness predicted number of work days limited. Only change in conscientiousness predicted the number of work days limited. Findings demonstrate that a full understanding of the link between personality and health requires consideration of trait change as well as trait level.

A unified framework for mesh refinement in random and physical space

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Jing; Stinis, Panos

In recent work we have shown how an accurate reduced model can be utilized to perform mesh renement in random space. That work relied on the explicit knowledge of an accurate reduced model which is used to monitor the transfer of activity from the large to the small scales of the solution. Since this is not always available, we present in the current work a framework which shares the merits and basic idea of the previous approach but does not require an explicit knowledge of a reduced model. Moreover, the current framework can be applied for renement in both randommore » and physical space. In this manuscript we focus on the application to random space mesh renement. We study examples of increasing difficulty (from ordinary to partial differential equations) which demonstrate the effciency and versatility of our approach. We also provide some results from the application of the new framework to physical space mesh refinement.« less

Optimization of automated large-scale production of [(18)F]fluoroethylcholine for PET prostate cancer imaging.

PubMed

Pascali, Giancarlo; D'Antonio, Luca; Bovone, Paola; Gerundini, Paolo; August, Thorsten

2009-07-01

PET tumor imaging is gaining importance in current clinical practice. FDG-PET is the most utilized approach but suffers from inflammation influences and is not utilizable in prostate cancer detection. Recently, (11)C-choline analogues have been employed successfully in this field of imaging, leading to a growing interest in the utilization of (18)F-labeled analogues: [(18)F]fluoroethylcholine (FEC) has been demonstrated to be promising, especially in prostate cancer imaging. In this work we report an automatic radiosynthesis of this tracer with high yields, short synthesis time and ease of performance, potentially utilizable in routine production sites. We used a Modular Lab system to automatically perform the two-step/one-pot synthesis. In the first step, we labeled ethyleneglycolditosylate obtaining [(18)F]fluoroethyltosylate; in the second step, we performed the coupling of the latter intermediate with neat dimethylethanolamine. The final mixture was purified by means of solid phase extraction; in particular, the product was trapped into a cation-exchange resin and eluted with isotonic saline. The optimized procedure resulted in a non decay corrected yield of 36% and produced a range of 30-45 GBq of product already in injectable form. The product was analyzed for quality control and resulted as pure and sterile; in addition, residual solvents were under the required threshold. In this work, we present an automatic FEC radiosynthesis that has been optimized for routine production. This findings should foster the interest for a wider utilization of this radiomolecule for imaging of prostate cancer with PET, a field for which no gold-standard tracer has yet been validated.

Application of high speed machining technology in aviation

NASA Astrophysics Data System (ADS)

Bałon, Paweł; Szostak, Janusz; Kiełbasa, Bartłomiej; Rejman, Edward; Smusz, Robert

2018-05-01

Aircraft structures are exposed to many loads during their working lifespan. Every particular action made during a flight is composed of a series of air movements which generate various aircraft loads. The most rigorous requirement which modern aircraft structures must fulfill is to maintain their high durability and reliability. This requirement involves taking many restrictions into account during the aircraft design process. The most important factor is the structure's overall mass, which has a crucial impact on both utility properties and cost-effectiveness. This makes aircraft one of the most complex results of modern technology. Additionally, there is currently an increasing utilization of high strength aluminum alloys, which requires the implementation of new manufacturing processes. High Speed Machining technology (HSM) is currently one of the most important machining technologies used in the aviation industry, especially in the machining of aluminium alloys. The primary difference between HSM and other milling techniques is the ability to select cutting parameters - depth of the cut layer, feed rate, and cutting speed in order to simultaneously ensure high quality, precision of the machined surface, and high machining efficiency, all of which shorten the manufacturing process of the integral components. In this paper, the authors explain the implementation of the HSM method in integral aircraft constructions. It presents the method of the airframe manufacturing method, and the final results. The HSM method is compared to the previous method where all subcomponents were manufactured by bending and forming processes, and then, they were joined by riveting.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Touati, Said; Chennai, Salim; Souli, Aissa

The increased requirements on supervision, control, and performance in modern power systems make power quality monitoring a common practise for utilities. Large databases are created and automatic processing of the data is required for fast and effective use of the available information. Aim of the work presented in this paper is the development of tools for analysis of monitoring power quality data and in particular measurements of voltage and currents in various level of electrical power distribution. The study is extended to evaluate the reliability of the electrical system in nuclear plant. Power Quality is a measure of how wellmore » a system supports reliable operation of its loads. A power disturbance or event can involve voltage, current, or frequency. Power disturbances can originate in consumer power systems, consumer loads, or the utility. The effect of power quality problems is the loss power supply leading to severe damage to equipments. So, we try to track and improve system reliability. The assessment can be focused on the study of impact of short circuits on the system, harmonics distortion, power factor improvement and effects of transient disturbances on the Electrical System during motor starting and power system fault conditions. We focus also on the review of the Electrical System design against the Nuclear Directorate Safety Assessment principles, including those extended during the last Fukushima nuclear accident. The simplified configuration of the required system can be extended from this simple scheme. To achieve these studies, we have used a demo ETAP power station software for several simulations. (authors)« less

Fabrication of rectangular cross-sectional microchannels on PMMA with a CO2 laser and underwater fabricated copper mask

NASA Astrophysics Data System (ADS)

Prakash, Shashi; Kumar, Subrata

2017-09-01

CO2 lasers are commonly used for fabricating polymer based microfluidic devices. Despite several key advantages like low cost, time effectiveness, easy to operate and no requirement of clean room facility, CO2 lasers suffer from few disadvantages like thermal bulging, improper dimensional control, difficulty to produce microchannels of other than Gaussian cross sectional shapes and inclined surface walls. Many microfluidic devices require square or rectangular cross-sections which are difficult to produce using normal CO2 laser procedures. In this work, a thin copper sheet of 40 μm was used as a mask above the PMMA (Polymethyl-methacrylate) substrate while fabricating the microchannels utilizing the raster scanning feature of the CO2 lasers. Microchannels with different width dimensions were fabricated utilizing a CO2 laser in with mask and without-mask conditions. A comparison of both the fabricating process has been made. It was found that microchannels with U shape cross section and rectangular cross-section can efficiently be produced using the with mask technique. In addition to this, this technique can provide perfect dimensional control and better surface quality of the microchannel walls. Such a microchannel fabrication process do not require any post-processing. The fabrication of mask using a nanosecond fiber laser has been discussed in details. An underwater laser fabrication method was adopted to overcome heat related defects in mask preparation. Overall, the technique was found to be easy to adopt and significant improvements were observed in microchannel fabrication.

Knowledge-based environment for optical system design

NASA Astrophysics Data System (ADS)

Johnson, R. Barry

1991-01-01

Optical systems are extensively utilized by industry government and military organizations. The conceptual design engineering design fabrication and testing of these systems presently requires significant time typically on the order of 3-5 years. The Knowledge-Based Environment for Optical System Design (KB-OSD) Program has as its principal objectives the development of a methodology and tool(s) that will make a notable reduction in the development time of optical system projects reduce technical risk and overall cost. KB-OSD can be considered as a computer-based optical design associate for system engineers and design engineers. By utilizing artificial intelligence technology coupled with extensive design/evaluation computer application programs and knowledge bases the KB-OSD will provide the user with assistance and guidance to accomplish such activities as (i) develop system level and hardware level requirements from mission requirements (ii) formulate conceptual designs (iii) construct a statement of work for an RFP (iv) develop engineering level designs (v) evaluate an existing design and (vi) explore the sensitivity of a system to changing scenarios. The KB-OSD comprises a variety of computer platforms including a Stardent Titan supercomputer numerous design programs (lens design coating design thermal materials structural atmospherics etc. ) data bases and heuristic knowledge bases. An important element of the KB-OSD Program is the inclusion of the knowledge of individual experts in various areas of optics and optical system engineering. This knowledge is obtained by KB-OSD knowledge engineers performing

Effects of Welfare and Maternal Work on Recommended Preventive Care Utilization Among Low-Income Children

PubMed Central

Holl, Jane L.; Oh, Elissa H.; Yoo, Joan; Amsden, Laura B.

2012-01-01

Objectives. We examined how maternal work and welfare receipt are associated with children receiving recommended pediatric preventive care services. Methods. We identified American Academy of Pediatrics–recommended preventive care visits from medical records of children in the 1999–2004 Illinois Families Study: Child Well-Being. We used Illinois administrative data to identify whether mothers received welfare or worked during the period the visit was recommended, and we analyzed the child visit data using random-intercept logistic regressions that adjusted for child, maternal, and visit-specific characteristics. Results. The 485 children (95%) meeting inclusion criteria made 41% of their recommended visits. Children were 60% more likely (adjusted odds ratios [AOR` = 1.60; 95% confidence interval [CI] = 1.27, 2.01) to make recommended visits when mothers received welfare but did not work compared with when mothers did not receive welfare and did not work. Children were 25% less likely (AOR = 0.75; 95% CI = 0.60, 0.94) to make preventive care visits during periods when mothers received welfare and worked compared with welfare only periods. Conclusion. The Temporary Assistance for Needy Families maternal work requirement may be a barrier to receiving recommended preventive pediatric health care. PMID:23078495

Efficient Agent-Based Cluster Ensembles

NASA Technical Reports Server (NTRS)

Agogino, Adrian; Tumer, Kagan

2006-01-01

Numerous domains ranging from distributed data acquisition to knowledge reuse need to solve the cluster ensemble problem of combining multiple clusterings into a single unified clustering. Unfortunately current non-agent-based cluster combining methods do not work in a distributed environment, are not robust to corrupted clusterings and require centralized access to all original clusterings. Overcoming these issues will allow cluster ensembles to be used in fundamentally distributed and failure-prone domains such as data acquisition from satellite constellations, in addition to domains demanding confidentiality such as combining clusterings of user profiles. This paper proposes an efficient, distributed, agent-based clustering ensemble method that addresses these issues. In this approach each agent is assigned a small subset of the data and votes on which final cluster its data points should belong to. The final clustering is then evaluated by a global utility, computed in a distributed way. This clustering is also evaluated using an agent-specific utility that is shown to be easier for the agents to maximize. Results show that agents using the agent-specific utility can achieve better performance than traditional non-agent based methods and are effective even when up to 50% of the agents fail.

Performance and long term degradation of 7 W micro-tubular solid oxide fuel cells for portable applications

NASA Astrophysics Data System (ADS)

Torrell, M.; Morata, A.; Kayser, P.; Kendall, M.; Kendall, K.; Tarancón, A.

2015-07-01

Micro-tubular SOFCs have shown an astonishing thermal shock resistance, many orders of magnitude larger than planar SOFCs, opening the possibility of being used in portable applications. However, only few studies have been devoted to study the degradation of large-area micro-tubular SOFCs. This work presents microstructural, electrochemical and long term degradation studies of single micro-tubular cells fabricated by high shear extrusion, operating in the intermediate range of temperatures (T∼700 °C). A maximum power of 7 W per cell has been measured in a wide range of fuel utilizations between 10% and 60% at 700 °C. A degradation rate of 360 mW/1000 h (8%) has been observed for cells operated over more than 1500 h under fuel utilizations of 40%. Higher fuel utilizations lead to strong degradations associated to nickel oxidation/reduction processes. Quick thermal cycling with heating ramp rates of 30 °C /min yielded degradation rates of 440 mW/100 cycles (9%). These reasonable values of degradation under continuous and thermal cycling operation approach the requirements for many portable applications including auxiliary power units or consumer electronics opening this typically forbidden market to the SOFC technology.

Utilization of mathematics amongst healthcare students towards problem solving during their occupational safety health internship

NASA Astrophysics Data System (ADS)

Umasenan a/l Thanikasalam

2017-05-01

Occupational safety health is a multidisciplinary discipline concentrating on the safety, health and welfare of workers in the working place. Healthcare Students undergoing Occupational Safety Health internships are required to apply mathematical in areas such as safety legislation, safety behavior, ergonomics, chemical safety, OSH practices, industrial hygiene, risk management and safety health practices as problem solving. The aim of this paper is to investigate the level of mathematics and logic utilization from these students during their internship looking at areas of Hazard identification, Determining the population exposed to the hazard, Assessing the risk of the exposure to the hazards and Taking preventive and control. A total of 142 returning healthcare students from their Occupational Safety Health, internship were given a questionnaire to measure their perceptions towards mathematical and logic utilization. The overall results indicated a strong positive skewed result towards the use of Mathematics during their internship. The findings showed that mathematics were well delivered by the students during their internship. Mathematics could not be separated from OSH practice as a needed precision in quantifying safety, health an d welfare of workers in addition to empiricism.

Research Opportunities Supporting the Vision for Space Exploration from the Transformation of the Former Microgravity Materials Science Program

NASA Technical Reports Server (NTRS)

Clinton, R. G., Jr.; Szofran, Frank; Bassler, Julie A.; Schlagheck, Ronald A.; Cook, Mary Beth

2005-01-01

The Microgravity Materials Science Program established a strong research capability through partnerships between NASA and the scientific research community. With the announcement of the vision for space exploration, additional emphasis in strategic materials science areas was necessary. The President's Commission recognized that achieving its exploration objectives would require significant technical innovation, research, and development in focal areas defined as "enabling technologies." Among the 17 enabling technologies identified for initial focus were: advanced structures, advanced power and propulsion; closed-loop life support and habitability; extravehicular activity systems; autonomous systems and robotics; scientific data collection and analysis, biomedical risk mitigation; and planetary in situ resource utilization. Mission success may depend upon use of local resources to fabricate a replacement part to repair a critical system. Future propulsion systems will require materials with a wide range of mechanical, thermophysical, and thermochemical properties, many of them well beyond capabilities of today's materials systems. Materials challenges have also been identified by experts working to develop advanced life support systems. In responding to the vision for space exploration, the Microgravity Materials Science Program aggressively transformed its research portfolio and focused materials science areas of emphasis to include space radiation shielding; in situ fabrication and repair for life support systems; in situ resource utilization for life support consumables; and advanced materials for exploration, including materials science for space propulsion systems and for life support systems. The purpose of this paper is to inform the scientific community of these new research directions and opportunities to utilize their materials science expertise and capabilities to support the vision for space exploration.

Regulation of glucose-dependent gene expression by the RNA helicase Dbp2 in Saccharomyces cerevisiae.

PubMed

Beck, Zachary T; Cloutier, Sara C; Schipma, Matthew J; Petell, Christopher J; Ma, Wai Kit; Tran, Elizabeth J

2014-11-01

Cellular homeostasis requires a fine balance between energy uptake, utilization, and growth. Dbp2 is a member of the DEAD-box protein family in Saccharomyces cerevisiae with characterized ATPase and helicase activity in vitro. DEAD-box RNA helicases are a class of enzymes that utilize ATP hydrolysis to remodel RNA and/or RNA-protein (RNP) composition. Dbp2 has been proposed to utilize its helicase activity in vivo to promote RNA-protein complex assembly of both messenger (m)RNAs and long noncoding (lnc)RNAs. Previous work from our laboratory demonstrated that loss of DBP2 enhances the lncRNA-dependent transcriptional induction of the GAL genes by abolishing glucose-dependent repression. Herein, we report that either a carbon source switch or glucose deprivation results in rapid export of Dbp2 to the cytoplasm. Genome-wide RNA sequencing identified a new class of antisense hexose transporter transcripts that are specifically upregulated upon loss of DBP2. Further investigation revealed that both sense and antisense hexose transporter (HXT) transcripts are aberrantly expressed in DBP2-deficient cells and that this expression pathway can be partially mimicked in wild-type cells by glucose depletion. We also find that Dbp2 promotes ribosome biogenesis and represses alternative ATP-producing pathways, as loss of DBP2 alters the transcript levels of ribosome biosynthesis (snoRNAs and associated proteins) and respiration gene products. This suggests that Dbp2 is a key integrator of nutritional status and gene expression programs required for energy homeostasis. Copyright © 2014 by the Genetics Society of America.

Development of flight experiment work performance and workstation interface requirements, part 1. Technical report and appendices A through G

NASA Technical Reports Server (NTRS)

Hatterick, R. G.

1973-01-01

A skill requirement definition method was applied to the problem of determining, at an early stage in system/mission definition, the skills required of on-orbit crew personnel whose activities will be related to the conduct or support of earth-orbital research. The experiment data base was selected from proposed experiments in NASA's earth orbital research and application investigation program as related to space shuttle missions, specifically those being considered for Sortie Lab. Concepts for two integrated workstation consoles for Sortie Lab experiment operations were developed, one each for earth observations and materials sciences payloads, utilizing a common supporting subsystems core console. A comprehensive data base of crew functions, operating environments, task dependencies, task-skills and occupational skills applicable to a representative cross section of earth orbital research experiments is presented. All data has been coded alphanumerically to permit efficient, low cost exercise and application of the data through automatic data processing in the future.

Requiring influenza vaccination for health care workers: seven truths we must accept.

PubMed

Poland, Gregory A; Tosh, Pritish; Jacobson, Robert M

2005-03-18

In this paper we outline the seven primary truths supporting the call for requiring influenza immunization of all health care workers. We view this as a serious patient safety issue, given the clear and compelling data regarding the frequency and severity of influenza infection. In addition, clear-cut safety, efficacy, economic, legal, and ethical platforms support the use of influenza vaccine. Unfortunately health care workers have demonstrated, over almost 25 years that they are unwilling to comply with voluntary influenza immunization programs utilizing a variety of education and incentive programs, at rates sufficient to protect the patients in their care. We suggest that an annual influenza immunization should be required for every health care worker with direct patient contact, unless a medical contraindication or religious objection exists, or an informed declination is signed by the health care worker. High rates of health care worker immunization will benefit patients, health care workers, their families and employers, and the communities within which they work and live.

Optical filter requirements in an EML-based single-sideband PAM4 intensity-modulation and direct-detection transmission system.

PubMed

Chen, Hsing-Yu; Kaneda, Noriaki; Lee, Jeffrey; Chen, Jyehong; Chen, Young-Kai

2017-03-20

The feasibility of a single sideband (SSB) PAM4 intensity-modulation and direct-detection (IM/DD) transmission based on a CMOS ADC and DAC is experimentally demonstrated in this work. To cost effectively build a >50 Gb/s system as well as to extend the transmission distance, a low cost EML and a passive optical filter are utilized to generate the SSB signal. However, the EML-induced chirp and dispersion-induced power fading limit the requirements of the SSB filter. To separate the effect of signal-signal beating interference, filters with different roll-off factors are employed to demonstrate the performance tolerance at different transmission distance. Moreover, a high resolution spectrum analysis is proposed to depict the system limitation. Experimental results show that a minimum roll-off factor of 7 dB/10GHz is required to achieve a 51.84Gb/s 40-km transmission with only linear feed-forward equalization.

In orbit adiabatic demagnetization refrigeration for bolometric and microcalorimetric detectors

NASA Astrophysics Data System (ADS)

Hepburn, I. D.; Ade, P. A. R.; Davenport, I.; Smith, A.; Sumner, T. J.

1992-12-01

The new generation of photon detectors for satellite based mm/submm and X-ray astronomical observations require cooling to temperatures in the range 60 to 300 mK. At present Adiabatic Demagnetization Refrigeration (ADR) is the best proposed technique for producing these temperatures in orbit due to its inherent simplicity and gravity independent operation. For the efficient utilization of an ADR it is important to realize long operational times at base temperature with short recycle times. These criteria are dependent on several parameters; the required operating temperature, the cryogen bath temperature, the amount of heat leakage to the paramagnetic salt, the volume and type of salt and the maximum obtainable magnetic field. For space application these parameters are restricted by the limitations imposed on the physical size, the mass, the available electrical power and the cooling power available. The design considerations required in order to match these parameters are described and test data from a working laboratory system is presented.

Microgravity fluid management requirements of advanced solar dynamic power systems

NASA Technical Reports Server (NTRS)

Migra, Robert P.

1987-01-01

The advanced solar dynamic system (ASDS) program is aimed at developing the technology for highly efficient, lightweight space power systems. The approach is to evaluate Stirling, Brayton and liquid metal Rankine power conversion systems (PCS) over the temperature range of 1025 to 1400K, identify the critical technologies and develop these technologies. Microgravity fluid management technology is required in several areas of this program, namely, thermal energy storage (TES), heat pipe applications and liquid metal, two phase flow Rankine systems. Utilization of the heat of fusion of phase change materials offers potential for smaller, lighter TES systems. The candidate TES materials exhibit large volume change with the phase change. The heat pipe is an energy dense heat transfer device. A high temperature application may transfer heat from the solar receiver to the PCS working fluid and/or TES. A low temperature application may transfer waste heat from the PCS to the radiator. The liquid metal Rankine PCS requires management of the boiling/condensing process typical of two phase flow systems.

Progress in Materials and Component Development for Advanced Lithium-ion Cells for NASA's Exploration Missions

NASA Technical Reports Server (NTRS)

Reid, Concha, M.; Reid, Concha M.

2011-01-01

Vehicles and stand-alone power systems that enable the next generation of human missions to the Moon will require energy storage systems that are safer, lighter, and more compact than current state-of-the- art (SOA) aerospace quality lithium-ion (Li-ion) batteries. NASA is developing advanced Li-ion cells to enable or enhance the power systems for the Altair Lunar Lander, Extravehicular Activities spacesuit, and rovers and portable utility pallets for Lunar Surface Systems. Advanced, high-performing materials are required to provide component-level performance that can offer the required gains at the integrated cell level. Although there is still a significant amount of work yet to be done, the present state of development activities has resulted in the synthesis of promising materials that approach the ultimate performance goals. This report on interim progress of the development efforts will elaborate on the challenges of the development activities, proposed strategies to overcome technical issues, and present performance of materials and cell components.

Wearable computer for mobile augmented-reality-based controlling of an intelligent robot

NASA Astrophysics Data System (ADS)

Turunen, Tuukka; Roening, Juha; Ahola, Sami; Pyssysalo, Tino

2000-10-01

An intelligent robot can be utilized to perform tasks that are either hazardous or unpleasant for humans. Such tasks include working in disaster areas or conditions that are, for example, too hot. An intelligent robot can work on its own to some extent, but in some cases the aid of humans will be needed. This requires means for controlling the robot from somewhere else, i.e. teleoperation. Mobile augmented reality can be utilized as a user interface to the environment, as it enhances the user's perception of the situation compared to other interfacing methods and allows the user to perform other tasks while controlling the intelligent robot. Augmented reality is a method that combines virtual objects into the user's perception of the real world. As computer technology evolves, it is possible to build very small devices that have sufficient capabilities for augmented reality applications. We have evaluated the existing wearable computers and mobile augmented reality systems to build a prototype of a future mobile terminal- the CyPhone. A wearable computer with sufficient system resources for applications, wireless communication media with sufficient throughput and enough interfaces for peripherals has been built at the University of Oulu. It is self-sustained in energy, with enough operating time for the applications to be useful, and uses accurate positioning systems.

Lubrication of Space Shuttle Main Engine Turbopump Bearings

NASA Technical Reports Server (NTRS)

Gibson, Howard; Munafo, Paul (Technical Monitor)

2001-01-01

The Space Shuttle has three main engines that are used for propulsion into orbit. These engines are fed propellants by four turbopumps on each engine. A main element in the turbopump is the bearings supporting the rotor that spins the turbine blades and the pump impeller. These bearings are required to spin at very high speeds, support radial and thrust loads, and have high wear resistance without the benefit of lubrication. The liquid hydrogen and oxygen propellants flow through the bearings to cool the surfaces. The volatile nature of the propellants excludes any conventional means of lubrication. Lubrication for these bearings is provided by the ball separator inside the bearing. The separator is a composite material that supplies a transfer film of lubrication to the rings and balls. New separator materials and lubrication schemes have been investigated at Marshall Space Flight Center in a bearing test rig with promising results. Hybrid bearings with silicon nitride balls have also been evaluated. The use of hybrid, silicon nitride ball bearings in conjunction -with better separator materials has shown excellent results. The work that Marshall has done is being utilized in turbopumps flying on the space shuttle fleet and will be utilized in future space travel. This result of this work is valuable for all aerospace and commercial applications where high-speed bearings are used.

Georgia Institute of Technology chilled water system evaluation and master plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-05-15

As the host of the Olympic Village for the 1996 Atlanta Olympics, Georgia Tech has experienced a surge in construction activities over the last three years. Over 1.3 million square feet of new buildings have been constructed on the Georgia Tech campus. This growth has placed a strain on the Georgia Tech community and challenged the facilities support staff charged with planning and organizing utility services. In concert with Olympic construction, utility planners have worked to ensure long term benefits for Georgia Tech facilities while meeting the short term requirements of the Olympic Games. The concentration of building construction inmore » the northwest quadrant of the campus allowed planners to construct a satellite chilled water plant to serve the needs of this area and provide the opportunity to integrate this section of the campus with the main campus chilled water system. This assessment and master plan, funded in part by the US Department of Energy, has evaluated the chilled water infrastructure at Georgia Tech, identified ongoing problems and made recommendations for long term chilled water infrastructure development and efficiency improvements. The Georgia Tech office of Facilities and RDA Engineering, Inc. have worked together to assemble relevant information and prepare the recommendations contained in this document.« less

Basic features of waste material storage in underground space in relation to geomechanics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Konecny, P.

1994-12-31

It is logical to consider utilizing underground cavities for waste material disposal because, during mining, great volumes of rock materials are extracted, and underground hollow areas and communicating workings are created that can, in general, be utilized for waste disposal. Additionally, in many cases, underground waste disposal favorably supports mining process technology (for instance, application of power plant fly ash and preparation plant tailings as hardened backfill). However, it is necessary to give particular attention to the preparation, operation, and isolation of underground tip areas; errors and, in extreme cases, emergencies in underground tips are generally more difficult to dealmore » with than those in surface tips. A tip place constructed underground becomes part of the rock massif; therefore, all natural laws that rule the rock massif must be respected. Of course, such an approach requires knowledge of processes and natural regularities that will occur in rock strata where tip places have been constructed. Such knowledge is gained through familiarity with contemporary geomechanical science. The paper discusses basic geomechanical principles of underground waste disposal; geomechanical aspects of rock massif evaluation in view of waste material storage in mine workings; and plans for an experimental project for waste disposal in the Dul Ostrava underground mine.« less

A Passive System Reliability Analysis for a Station Blackout

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brunett, Acacia; Bucknor, Matthew; Grabaskas, David

2015-05-03

The latest iterations of advanced reactor designs have included increased reliance on passive safety systems to maintain plant integrity during unplanned sequences. While these systems are advantageous in reducing the reliance on human intervention and availability of power, the phenomenological foundations on which these systems are built require a novel approach to a reliability assessment. Passive systems possess the unique ability to fail functionally without failing physically, a result of their explicit dependency on existing boundary conditions that drive their operating mode and capacity. Argonne National Laboratory is performing ongoing analyses that demonstrate various methodologies for the characterization of passivemore » system reliability within a probabilistic framework. Two reliability analysis techniques are utilized in this work. The first approach, the Reliability Method for Passive Systems, provides a mechanistic technique employing deterministic models and conventional static event trees. The second approach, a simulation-based technique, utilizes discrete dynamic event trees to treat time- dependent phenomena during scenario evolution. For this demonstration analysis, both reliability assessment techniques are used to analyze an extended station blackout in a pool-type sodium fast reactor (SFR) coupled with a reactor cavity cooling system (RCCS). This work demonstrates the entire process of a passive system reliability analysis, including identification of important parameters and failure metrics, treatment of uncertainties and analysis of results.« less

Optimal RTP Based Power Scheduling for Residential Load in Smart Grid

NASA Astrophysics Data System (ADS)

Joshi, Hemant I.; Pandya, Vivek J.

2015-12-01

To match supply and demand, shifting of load from peak period to off-peak period is one of the effective solutions. Presently flat rate tariff is used in major part of the world. This type of tariff doesn't give incentives to the customers if they use electrical energy during off-peak period. If real time pricing (RTP) tariff is used, consumers can be encouraged to use energy during off-peak period. Due to advancement in information and communication technology, two-way communications is possible between consumers and utility. To implement this technique in smart grid, home energy controller (HEC), smart meters, home area network (HAN) and communication link between consumers and utility are required. HEC interacts automatically by running an algorithm to find optimal energy consumption schedule for each consumer. However, all the consumers are not allowed to shift their load simultaneously during off-peak period to avoid rebound peak condition. Peak to average ratio (PAR) is considered while carrying out minimization problem. Linear programming problem (LPP) method is used for minimization. The simulation results of this work show the effectiveness of the minimization method adopted. The hardware work is in progress and the program based on the method described here will be made to solve real problem.

Employment-based abstinence reinforcement following inpatient detoxification in HIV-positive opioid and/or cocaine-dependent patients

PubMed Central

Dunn, Kelly; Fingerhood, Michael; Wong, Conrad J.; Svikis, Dace S.; Nuzzo, Paul; Silverman, Kenneth

2015-01-01

Employment-based reinforcement interventions have been used to promote abstinence from drugs among chronically unemployed injection drug users. The current study utilized an employment-based reinforcement intervention to promote opiate and cocaine abstinence among opioid-dependent, HIV-positive participants who had recently completed a brief inpatient detoxification. Participants (n=46) were randomly assigned to an Abstinence & Work group that was required to provide negative urine samples in order to enter the workplace and earn incentives for work (n=16), a Work Only group that was permitted to enter the workplace and earn incentives independent of drug use (n=15), and a No Voucher control group that did not receive any incentives for working (n=15) over a 26-week period. The primary outcome was urinalysis-confirmed opiate, cocaine, and combined opiate/cocaine abstinence. Participants were 78% male and 89% African American. Results showed no significant between-group differences in urinalysis-verified drug abstinence or HIV risk behaviors during the 6-month intervention. The Work Only group had significantly greater workplace attendance and worked more minutes per day when compared to the No Voucher group. Several features of the study design, including the lack of an induction period, setting the threshold for entering the workplace too high by requiring immediate abstinence from several drugs, and increasing the risk of relapse by providing a brief detoxification that was not supported by any continued pharmacological intervention, likely prevented the workplace from becoming established as a reinforcer that could be used to promote drug abstinence. However, increases in workplace attendance have important implications for adult training programs. PMID:24490712

Vigour and dedication in nursing professionals: towards a better understanding of work engagement.

PubMed

Jenaro, Cristina; Flores, Noelia; Orgaz, Maria Begoña; Cruz, Maribel

2011-04-01

This paper analyses the association between nurses' individual characteristics, job features and work engagement. Current shortage of nurses and turnover justify more research efforts on job satisfaction. Closely associated with job satisfaction is work engagement, a construct which is composed of vigour, dedication and absorption, and requires more empirical evidence supporting its relevance. Most of the studies focus on organizational features, while reducing the relevance of individual characteristics. Survey data for this descriptive, correlational study were collected over a 7-month period (2006-2007) from a convenience sample of 412 Nurses. Measures utilized were the Work Engagement Survey, the General Health Questionnaire, and an ad hoc survey. Concerning psychiatric morbidity, 49% nurses met criteria for somatic symptoms, 65.5% met criteria for anxiety and insomnia, 4.6% met criteria for social dysfunction and 10% met criteria for severe depression. There were no effects for length of service or professional category. Nurse managers scored significantly higher in several job stressors compared with other groups. Concerning engagement, 33% of the nurses experienced high dedication, 20.4% experienced high vigour and 36.7% experienced high absorption. Predictors of vigour and dedication were satisfaction with job position, higher quality of working life, lower social dysfunction and lower stress associated with patient care. Strategies to promote work engagement should be implemented. More attention should be paid to job environments to guarantee job satisfaction. Organizational strategies to reduce the stress associated with patients' care, and initiatives to improve social and communication skills are also required for nurses to experience vigour and dedication. © 2010 The Authors. Journal of Advanced Nursing © 2010 Blackwell Publishing Ltd.

42 CFR 456.211 - Recipient information required for UR.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Recipient information required for UR. 456.211 Section 456.211 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Utilization Control: Mental Hospitals...

78 FR 65427 - Pipeline Safety: Reminder of Requirements for Liquefied Petroleum Gas and Utility Liquefied...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2013-0097] Pipeline Safety: Reminder of Requirements for Liquefied Petroleum Gas and Utility Liquefied Petroleum Gas Pipeline Systems AGENCY: Pipeline and Hazardous Materials Safety Administration...

Health Outcomes and Costs of Social Work Services: A Systematic Review

PubMed Central

Ross, Abigail M.; Wachman, Madeline K.

2017-01-01

Background. Efforts to reduce expensive health service utilization, contain costs, improve health outcomes, and address the social determinants of health require research that demonstrates the economic value of health services in population health across a variety of settings. Social workers are an integral part of the US health care system, yet the specific contributions of social work to health and cost-containment outcomes are unknown. The social work profession’s person-in-environment framework and unique skillset, particularly around addressing social determinants of health, hold promise for improving health and cost outcomes. Objectives. To systematically review international studies of the effect of social work–involved health services on health and economic outcomes. Search Methods. We searched 4 databases (PubMed, PsycINFO, CINAHL, Social Science Citation Index) by using “social work” AND “cost” and “health” for trials published from 1990 to 2017. Selection Criteria. Abstract review was followed by full-text review of all studies meeting inclusion criteria (social work services, physical health, and cost outcomes). Data Collection and Analysis. Of the 831 abstracts found, 51 (6.1%) met criteria. Full text review yielded 16 studies involving more than 16 000 participants, including pregnant and pediatric patients, vulnerable low-income adults, and geriatric patients. We examined study quality, health and utilization outcomes, and cost outcomes. Main Results. Average study quality was fair. Studies of 7 social work–led services scored higher on quality ratings than 9 studies of social workers as team members. Most studies showed positive effects on health and service utilization; cost-savings were consistent across nearly all studies. Conclusions. Despite positive overall effects on outcomes, variability in study methods, health problems, and cost analyses render generalizations difficult. Controlled hypothesis-driven trials are needed to examine the health and cost effects of specific services delivered by social workers independently and through interprofessional team-based care. Public Health Implications. The economic and health benefits reported in these studies suggest that the broad health perspective taken by the social work profession for patient, personal, and environmental needs may be particularly valuable for achieving goals of cost containment, prevention, and population health. Novel approaches that move beyond cost savings to articulate the specific value-added of social work are much needed. As health service delivery focuses increasingly on interprofessional training, practice, and integrated care, more research testing the impact of social work prevention and intervention efforts on the health and well-being of vulnerable populations while also measuring societal costs and benefits is essential. PMID:29236534

Enabling Efficient Climate Science Workflows in High Performance Computing Environments

NASA Astrophysics Data System (ADS)

Krishnan, H.; Byna, S.; Wehner, M. F.; Gu, J.; O'Brien, T. A.; Loring, B.; Stone, D. A.; Collins, W.; Prabhat, M.; Liu, Y.; Johnson, J. N.; Paciorek, C. J.

2015-12-01

A typical climate science workflow often involves a combination of acquisition of data, modeling, simulation, analysis, visualization, publishing, and storage of results. Each of these tasks provide a myriad of challenges when running on a high performance computing environment such as Hopper or Edison at NERSC. Hurdles such as data transfer and management, job scheduling, parallel analysis routines, and publication require a lot of forethought and planning to ensure that proper quality control mechanisms are in place. These steps require effectively utilizing a combination of well tested and newly developed functionality to move data, perform analysis, apply statistical routines, and finally, serve results and tools to the greater scientific community. As part of the CAlibrated and Systematic Characterization, Attribution and Detection of Extremes (CASCADE) project we highlight a stack of tools our team utilizes and has developed to ensure that large scale simulation and analysis work are commonplace and provide operations that assist in everything from generation/procurement of data (HTAR/Globus) to automating publication of results to portals like the Earth Systems Grid Federation (ESGF), all while executing everything in between in a scalable environment in a task parallel way (MPI). We highlight the use and benefit of these tools by showing several climate science analysis use cases they have been applied to.

Theoretical modelling and optimization of bubble column dehumidifier for a solar driven humidification-dehumidification system

NASA Astrophysics Data System (ADS)

Ranjitha, P. Raj; Ratheesh, R.; Jayakumar, J. S.; Balakrishnan, Shankar

2018-02-01

Availability and utilization of energy and water are the top most global challenges being faced by the new millennium. At the present state water scarcity has become a global as well as a regional challenge. 40 % of world population faces water shortage. Challenge of water scarcity can be tackled only with increase in water supply beyond what is obtained from hydrological cycle. This can be achieved either by desalinating the sea water or by reusing the waste water. High energy requirement need to be overcome for either of the two processes. Of many desalination technologies, humidification dehumidification (HDH) technology powered by solar energy is widely accepted for small scale production. Detailed optimization studies on system have the potential to effectively utilize the solar energy for brackish water desalination. Dehumidification technology, specifically, require further study because the dehumidifier effectiveness control the energetic performance of the entire HDH system. The reason attributes to the high resistance involved to diffuse dilute vapor through air in a dehumidifier. The present work intends to optimize the design of a bubble column dehumidifier for a solar energy driven desalination process. Optimization is carried out using Matlab simulation. Design process will identify the unique needs of a bubble column dehumidifier in HDH system.

Energy Logic (EL): a novel fusion engine of multi-modality multi-agent data/information fusion for intelligent surveillance systems

NASA Astrophysics Data System (ADS)

Rababaah, Haroun; Shirkhodaie, Amir

2009-04-01

The rapidly advancing hardware technology, smart sensors and sensor networks are advancing environment sensing. One major potential of this technology is Large-Scale Surveillance Systems (LS3) especially for, homeland security, battlefield intelligence, facility guarding and other civilian applications. The efficient and effective deployment of LS3 requires addressing number of aspects impacting the scalability of such systems. The scalability factors are related to: computation and memory utilization efficiency, communication bandwidth utilization, network topology (e.g., centralized, ad-hoc, hierarchical or hybrid), network communication protocol and data routing schemes; and local and global data/information fusion scheme for situational awareness. Although, many models have been proposed to address one aspect or another of these issues but, few have addressed the need for a multi-modality multi-agent data/information fusion that has characteristics satisfying the requirements of current and future intelligent sensors and sensor networks. In this paper, we have presented a novel scalable fusion engine for multi-modality multi-agent information fusion for LS3. The new fusion engine is based on a concept we call: Energy Logic. Experimental results of this work as compared to a Fuzzy logic model strongly supported the validity of the new model and inspired future directions for different levels of fusion and different applications.